tender for darulshafa compound, civil maintenance and painting work in double story and multi story and various houses of the compound, 1 repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-chargewith cement mortar 1:4 (1cement: 4 coarse sand) (dsr14.1.2) 2 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (dsr 13.91) 3 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(d.s.r item-13.80) 4 distempering with 1st quality acrylic distemper (ready mixed) having voc (volatile organic compound ) content less than 50 gram/ litre, of approved brandandmanufacturerincludingapplyingadditionalcoatswherever required to achieve even shade and colour (old work (one or more coats)dsr13.81.1 5 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :(one or more coats on old work)dsr13.99.1 6 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shadeold work (two or more coats applied @ 1.43 ltr/ 10 sqm) overexisting cement paint surface dsr13.112.1 7 providingandfixingg.i.pipescompletewithg.i.fittingsandclamps, including cutting and making good the walls etc. (15 mm dia nominal bore) dsr 18.10.1 8 renewing glass panes, with wooden fillets wherever necessary: float glass panes of nominal thickness 5 mm (weight not lessthan 12.5kg/sqm)dar14.6.2 9 fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading (dsr -9.7.8) 10 providing and fixing isi marked flush door shutters conforming to is: 2202 (part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply vereering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including isi marked stainless steel bolt hinges with necessary(dsr -9.21.2) 11 providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).(dsr -9.53) 12 providing and fixing isi marked is:1341 m.s. pressed butt hinges bright finished with necessary screws etc. complete100x58x1.90mm (dsr9.55.2) 13 providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and screws etc. complete (copper oxidised as per is 1378). 250x16 mm (dsr -9.62.2) 14 providing and fixing isi marked oxidised m.s. tower bolt black finish, (barrel type) with necessary screws etc. complete (copper oxidised as per is 1378). 250x10 mm(dsr -9.63.1) 15 providing and fixing isi marked oxidised m.s. tower bolt black finish, (barrel type) with necessary screws etc. complete (copper oxidised as per is 1378). 150x10 mm(dar -9.63.3) 16 providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete (copper oxidised as per is 1378). 125 mm (dsr -9.66.1) 17 providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 250x10 mm(dsr -9.74.1) 18 providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 200x10 mm(dsr -9.74.2) 19 providing and fixing c.p.brass bib cock of approved quality conforming to is: 8931 15 mm nominal bore ( 18.49.1) 20 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 (15 mm nominal bore)dsr18.53.1 21 providing and fixing water closet squaiting pan (indian type w.cpan) with 100 mm sand cast iron p or s trap. 10 liter low level white p.v.c flushing cistern. including flush pipe, with manually controlled device (handle lever) conformingto is : 7231, with all fittings and fixtures complete. including cutting and making good the walls and floors wherever required white vitreous chin orissa pattern w.c. pan of size 580x440 mm with integal typefoot rests. (dsr17.1.1) 22 providing and fixing wash basin with c.l. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. white vitreous china wash basin size-630x450 mm with a pair of 15 mm c.p. brass pillar taps. (17.7.1) 23 providing and fixing pvc waste pipe for sink or wash basin including pvc waste fittings complete. semi rigid pipe 32mm dia(17.28.1.1). 24 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. (dar17.31). 25 cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of engineer- in-charge. (the old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ rs. 0.10 per litre) (if during cleaning any gi fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra a)will be paid on this account)(dsr14.75a) 26 disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge(dsr 1.1.18) 27 painting with synthetic enamel paint of approved o and manufacture of required colour to give an even shade : two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture)(dsr3.62.1) 28 providing and fixing 1mm thick m.s. sheet door with frame of 40x40x6 mm angle iron and 3 mm m.s. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer(using flats 30x6mm for diagonal braces and central cross piece) dsr 10.5.2