tender for provision of certain special repairs, addition alteration and minor works at caw, secunderabad under ge (af) hakimpet-1 dismantling boarding, any description, fixed in any position with screws complete all as specified and as directed by engr-in-charge 2 m &lsand filling under floors or in foundations including watering and consolidationcomplete all as specified and directed. 3 m & l hardwood 1st class 21 mm thick for planed one side & edges tongued and grooved or rebated, and complete all as specified and directed. 4 m & l second class hard-wood in scantlings timber fixed clean sawn, secured with nails or brads complete all as specified and directed. 5 s&f mild steel screw bolts (machine made) 12mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm and n exc 22.5cmlong complete all as specified and directed. 6 m & l french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed 7 m&l french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats complete all as specified and as directed. 8 taking down cement plaster on brick or stone etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. 9 m&l for gi wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and wastecomplete all as directed 10 m&l rendering 15 mm thickon fair faces ofbrick work orconcrete surfaces in cm 1:3 is to be finished even and smooth (with out using extra cement) complete all as directed 11 m&l for 15 mm thick rendering in cm (1:4) onexternal surfaces/ outside surfaces finished even and smooth without using extra cement 12 m&l for preparation of new surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of priming paints plaster coat all as specified and as directed by engineer in charge 13 complete removal of existing treatment from walls including scrapping and removing the entire scales of existing treatment complete all as directed.(internal and external) 14 complete removal of existing treatment from ceiling including scrapping and removing the entire scales of existing treatment complete all as directed.(internal and external) 15 m&l for distempering with 1st quality acrylic distemper wall/ceiling (ready mixed) having voc content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification. two or more coats on new work all as specified and directed 16 m&l for providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed. 17 m&l forapplying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. 18 taking down chowkats or frames exc. 1.5 sq mtr each with shutters (without taking off shutters from the frames) complete all as specified and as directed by the engineer-in-charge 19 s&f factory made upvc door frame made of upvc. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. the hinge side vertical of the frames reinforced by galvanized m.s. tube of size 19 x 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete