supply and delivery of cesspool tanker (suction cum jetting machine) 6000l bs vi with chassis in vadakarai keelpidagaitown panchayat , supply and delivery of cesspool tankerwith following specifications features -vacuum pump - type- rotary sliding vane -lubrication- forged oil lubrication- cooling - aircooled , suction hose- dialength qty- 4 / 3 mtr. / 10 nos with suitable clamp & washer and holder in both side of tanker. , sludge suction & drain value-size 4-type- knife gate ball valve heavy duty (for suction and delivery separately.) , hyd.pump-type -not applicable drive - not applicable , tank - volume - water storage tank -1000 litre sludge storage tank -5000 litre built by 6 mm thick ms plate manually open type rear door and another side fixed dish end type. in sludge tank side inner slide plate must provided at an angle of 7 degree, and also provide reinforecement to avoid buckleness in vaccum and pressure operation. , vacuum pump- make - imported brand only - jurop / mono / gardrner denvermistrel / battioni only. flow / vacuum-500-550 cum ./hr./90% - mode of operation-suction and pressuremake- prattisoli or equivalent imported make only. , jetting pump - working pressure -150-160 bar hose length - 120 m - imported brand only -size -3/4 dia.-water flow for pump of jetting machine-80-100 lpm - minimum brust pressure of jetting hose - 250-300 bar-maximum working pressure of jetting hose-100-120 bar , safety-water level indicator - type/qty- tube type / 2 nos - 2 dia. , pressure relief valve - size/qty-2/1 no , vacuum relief valve - size/qty-1.5/1 nos , gauges- size/qty- 6 dial vaccum gauge & pressure gauge separately. , mounting- chassis a) gvw - 12 ton b) emission norms - as per local rto c) chassis engine output - min.90 hp d) driver’s cabin type - single (day) cabin e) make -ashok layland/ tata/ eicher/ equivalent with pto with emission norms bsvi f) make/model/wb/hp/side pto provision- any other equivalent model of other chassis manufacturers g) scope - customer h) side pto provision- provision required , dimensions - equipment a) equipment length- 4500-5150 mm approx b) equipment height- 1500-2200 mm approx c) overall width- 2000-2250 mm approx d) overall length - 3000-3500 mm approx e) equipment rear overhang -600-1600 mm approx , painting - surface preparation and finish a) eqiuipments exterior - spray-painted with two coats of superior qulity of enamel metal paint colour code will be as per customer requirements b) tanks interior- coated with 2 coats of superior quality anti-corrosive gray epoxy paint , for the first one year themaintenance cost per cesspool tanker and also commisioning of vehicle and training of concern tps operato for a period minimum one week shall be the responsibility of the supplier