tender for maintenance of motor room & culvert and drainage at ward no.01 chithandipalayam in kunnathur town panchayat. ; 1 dismantaling of rcc including all labour charges 2 plain cement concrete 1:4:8 mix ( one part of cement, four part of m- sand and eight part ofaggrigate ) using 40 mm size iss hbg metal from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing. laying and curing etc., complete as per tndss no : 28 & vi ( s2 ) vi ( s5a ) vii standard specifications as directed by engineer incharge. 3 brick work in cement mortor 1:5 mix ( one cement, five m.sand ) using best ii class ground mould bricks of size 9 ” x 4 3 / 8 “x 2 3 / 4 ”from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications. ( tndss no:31 & similar to 31c v, vi ( s5 ) vii ) 4 plastering in cement mortor 1:5 mix ( one cement, five m- sand ) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications. 5 special ceiling plastering in cement mortor 1:3 mix ( one cement, three m- sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications-10 m2. 6 supplying and errecting centering to sides and soffits including supports and struttingfor drainage sides andculvert body wall sidesusing m.s sheets of size90cm x 60cm and b.g 10stifenedwith welded mild steel angles of size 25mm x 25mm x 3mm for boardinglaid over ( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete complying with standard specification as per tndss no.30&86 ( for drain, deck slab & retainingwall ) 7 reinforced cement concrete 1:1½:3 mix ( one part of cement, one and half part of m- sand and three part ofaggregate ) using 20mm size iss hbg metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.complete with std.specifications. tndss no: 30 v, vi ( s3 ) , vii-3. 8 supplying and fabrication of steel and placing in position of tmt steel rods for rcc works as per design given including cost of steel and gi binding wire in all floors etc., complete complying with standard specification in tndss no:97 v, vi ( s6 ) vii ( s6 ) , vii-3. 9 painting two coats with good quality of approved emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., complete as per standard specificationsfor 10 sqm 10 painting two coats on new iron works with best synthetic enamel paint of approved colour and quality – 10m2. 11 finishing the top of flooring with granothatic flooring with cement concrete 1:2:4 ( one cement, two m- sand and four aggrigate ) using 10 to 12mm stone chips – 25mm tk etc., complete. 12 supplying and fixing of m.s doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications. 13 supplying and fixing rcc pre cast slab in rcc 1:1 1 / 2:3 mix including cost of reinforcement grill but including moduling, finishing watering curing and fixing in position etc., complete as per std., specifications.,