tender for renovation and repairing of judges colony distt judge compound in moradabad, 1 scrapping old white or colour wash including disposal of refuse as directed by the engineer in charge with in a distance of 60 meter (200 feet) s.i. no. 708 2 providing wall putty on old surface with approved quality material of berger/jk/birla or similar make 2 coats s.i. no. 12 page 43 3 distemperingtwo coat with oil bound distemper of approved brand and manufacture and required shade on old discempered surface to with and even shade over including a primer coat with cement primer of approved brand after thoroughly brushing the british shalimar mortar droppings and other foreign matter and also including preparing the surface even and sand prepared smooth including cost of all materials. as per s.i. no. 649+650. 4 finishing wall with two coat of water proof cement paint weather coat of approved quality on previously new surcae with this paint to gave even shade including suply of all material labour tools and plants etc required for proper completion of the work & same as above but over previously painted surface weather coat s.i. no. 8+10 page 43 5 providing cement primer on old/new surface with approval quality material of berger/j.k./ birla or similar make 2 coats. s.i. chap. 43 item no. 11 6 painting two coat over priming coat (but excluding cost of priming coat) on previously painted old surface with paint of wood or steal and other metal surface with superior synthetic enamel paint of standard make brushing to give an even shade and finished and including cleaning the surface all dirt dust and other foreign meter sand papering and stripping including cost meter and scoured with wire brushes fine steel/wood scrappers sand papering and knotting including coat of all and supply of all material labour and t&p etc required for proper completion of the work & (new item no. 2+3(iii)) page no. 41 7 dismentling cement concrete or brick work or granulithic floor and including base concrete and including stacking of materials directed by the engineer-in-charge with in a distance of 60 meter (200 feet) s.i. no. 697 8 disposing of malwa of scrapped material including stacking as per engineer in charge with in a distance of 5 km. 9 providing and laying app (atactic polypropylene polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°c, 0.87 - 0.89 kg/litre and vis cocity 70 - 160cps. over the primer coat the layer of membrane shall be laid using butanetorch and sealing all joints etc., and preparing the surface complete. thevital physical and chemical parameters of the membrane shall be as under: joint strength in longitudinal and transverse direction at 23°c as 350/300n/5 cm. tear strength in longitudinal and transverse direction as 60/80n. softening point of membrane not less than 150°c. cold flexibility shall be upto -2°c when tested in accordance with astm, d - 5147. the laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick dsr no. 14.90.1 10 12 mm thick plaster with cement and approved course sand in proportion 1:3 over brick work minimum thickness not to be less than 1 cm including supply of all materials labour and t&p etc. required for proper completion of the work si.no. 583 11 m-150 brick work in 1:3 (one cement and three coarse sand of 1.25 f.m. mortar) foundation and plinth including supply of all materials, labour & t&p required for proper completion of work & also including labour cess, royalty etc complete. excluding gst s.i. no. 307 12 supply and fixing 6mm thick china glazed tiles of grade-first quality in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labour and t&p etc. required for proper completion of the work. s.i. no. 628 13 providing and fixing isi marked 32mm flush door shutter conforming to is 2202 (part i) decorated type core of block board with frame of first class hard wood and well matched teak three ply beneering with vertical grance of crop band and face beneering on both face of shutter.s.i. no. 470(i) 14 dismantling door or window including chaukhats with hold fasts and including stacking of materials as directed by the engineer in charge with in a distance of 60 meter (200 feet) s.i. no. 703 15 providing sal wood work in frames of windows cleastory window and other frames wrought framed and fixing in position. s.i. no. 9.1.2 16 providing and fixing 25 mm thick shutters for cupboards etc. including lsi marked black enamelled m.s. butt hinges with necessary screws: : teak wood s.i. no. 9.19.1.1 17 supply and fixing fly proof galvanized ms wire gauge to windows and clerestory window using galvanised ms wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 with bidding. s.i no. 9.51.1 18 oiling wood work with double boiled linseed oil including preparing surface by thoroughly cleaning and sand preparing and supply of all material labour and t&p etc required for proper completion of the work. s.i. no. 656 19 wax or french polishing new wood work with approved french polish (in proportion 2 bees wax : 1.5 linseed oil 1 terpentine oil 0.50 varanis by wt) after rubbing down with sand paper including supply of all material labour and t&p etc required for proper completion of the work. s.i. no. 658 20 supply and fixing of 10cm internal dia pvc 4 dia down pipe of 6 kgm/sqm cm presure everst of chrminar make complete with bands with door at top and plain at bottom and grating and including supply of necessary ms clamps 2.5 cm x3mm fixed to walls with and including supply of 10cm long 6 mm dia nuts and bolts including washer of required size all material labour and t&p etc required for proper completion of the work and also including repair of plaster pointing etc if damage during fixing of the pipe (s.i. no. 730(a)) 21 providing and fixing nickel plated m.s. pipe curtain rods with nickel plated brackets : 25 mm dia (heavy type) dsr no. 9.47.2 22 providing and laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. this layer will be allowed to air cure for 4 hours. (b) second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.(the rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) dsr no. 22.5 23 providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge : 11.55.1 flamed finish granite stone slab jet black, cherry red, elite brown, cat eye or equivalent. dsr no. 11.55 24 providing and fixing stainless steel a isi 304 (18/8) kitchen sink as per is:13983 with c.i. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 kitchen sink with drain board 510x1040 mm bowl depth 225 mm dsr no. 17.10.1.2 25 supplying and fixing rolling shutter of approved make of 80x125mm gauge cold rolled m.s laths inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets. s.i. no. 520 26 r.c.c. work with cement approved coarse sand and 2cm. gauge approved stone grit in proportion of 1:2:4 in lintels of doors, windows and sunshades excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 b.w.g.g.i binding wire and including necessary centering and shuttering etc. and supply of all meterials, labour and t&p etc. required for proper completion of work. binding wire to be supplied by the contractor free of cost. including making of drip coarse. including all taxes but excluding gst s.i. no. 283 27 mild steel or tmt bars(fe-500d grade or higher) orhysd bars or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) brought to required shape as necessary including bending for proper completion of the work and including supply of all steel. 28 providing and fixing water closet squatting pan (indian type w.c. pan) with 100mm sand cast iron p or strap, 10 litre low level white p. v.c. flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests. s.i. no. 17.1.1 29 providing and fixing white vetreous china pedestal type water closet (european type) with seal and lid, 10 litre low level white vitreous china flushing cistern & c.p. flush bend with fittings & c.i. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. s.i. no. 17.3.1 30 providing and fixingp.v.c. low level flushing cisternwithmanuallycontrolleddevice (handle lever) conforming to is : 7231, with all fittings and fixtures complete. s.i. no. 17.18.1 31 providing and fixing white vitreous china wash basinincludingmakingallconnectionsbut excluding the cost of fittings : flat back wash basin of size 630x450mm s.i. no. 17.25.1 32 providingandfixingp.v.c.wastepipefor sinkorwashbasinincludingp.v.c.waste fittings complete. 32mm dia (semi rigid pipe) s.i. no. 17.28.1.1 33 providingandfixing600x450mmbevelled edgemirrorofsuperiorglass(ofapproved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. s.i. no. 17.31 34 providingand fixing g.i.pipescompletewith g.i. fittings and clamps, including cutting and makinggoodthewallsetc.linternalwork- exposedonwall:15mmdia.nominalbore s.i. no. 18.10.1 35 providingand fixing g.i.pipescompletewith g.i. fittings and clamps, including cutting and makinggoodthewallsetc.linternalwork- exposedonwall:15mmdia.nominalbore s.i. no. 18.10.2 36 providing and fixing brassbib cock of approvedquality: 15mmnominalbores.i. no. 18.15.1 37 providing and fixing ball valve (brass) of approved quality complete:s.i. no. 18.18.1.1 38 providingandfixingc.p.brassbibcockof approvedqualityconformingtois:8931.s.i. no. 18.49.1 39 providing and fixing c.p. brass long nose bib cockofapprovedqualityconformingtois standardsandweighingnotlessthan810 gms. s.i. no. 18.50.1 40 providingandfixingc.p.brassstopcock (concealed)ofstandarddesignandof approvedmakeconformingtois:8931.s.i. 18.52.1 41 providingandfixingc.p.brassanglevalve for basin mixer and geyser points of approved quality conforming to is:893. s.i. no. 18.53.1 42 providing and placing on terrace (at all floor levels) polyethylene water storage tank lsi: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. s.i. no. 18.48 43 excavation in foundation in ordinary soil (loam clay and sand) including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the side of foundation, including cost of material, labour,royalty, labour cess, t&p etc and other taxes but excluding gst.s.i. no. 251 44 cement concrete with 4 cm gauge with stone ballast coarse sand & cement in proportion 8:4:1 in foundation proper completion of the work including cost of material, labour,royalty, labour cess, t&p etc and other taxesbut excluding gst s.i. no. 281 45 cement concrete with 2 cm gauge stone grit / single course sand and cement in proportion of 4:2:1 including supply of all material labour & t&p etc. required for proper completion of the work including cost of material, labour,royalty, labour cess, t&p etc and other taxes complete but excluding gst si.no. 279 (a) 46 providing and fixing of brick-bats of o.b.b./150bb including cost of material, labour,royalty, labour cess, t&p etc and other taxes complete but excluding gst 47 supply and fixing 6 to 8 mm thick ivory or light shades vitrified tiles of standard make 600 x600 mmsize(bell / kajaria / somani or other standred make) in flooring and skirting with 1:3 approved cement and coarse sand mortar finished with in its cement colour slurry, jointing and polished of approved quality complete includingsupply of all materials labour tools and plants etc required for proper completion of the work. as per directionof engineer-in- charge. s.i. no. chp. 14 new item no. 5