miscellaneous necessary civil work in village amarpur, daudpur, dadopur dankaur, pipalka, hatewa, nawada, bisayach, nanwa ka rajpur and bagpur in greater noida. - excavation in foundation in ordinary soil(loam, clay or sand) including lift upto 1.50 m. and lead upto 30 m. and including filling watering and ramming ofexcavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge upto a distance of 30 m. from the foundation trenches. (where machine con not reach/move). for building work only(sor-251a) 3 extra rates for quantities of work excavated in or under water and liquid subsoilincluding pumping out of water as required.(ar- 25% rate of sor-253a) 4 cartage of earth or fly ash when added toschedule item no. 253. (sor-251a) 5 lead upto 1.0 km. sor-261 6 cleaning jungle including up rooting of rank, vegetations grass, push, wood trees and samplings of grith upto 30 cms. measured at a height of 1 m. above ground level and to a distance of 50m. out side the removal of rubbish up periphery of area cleared. sor-259(i) 7 tractor trolley with driver and including pol (sor-19) 8 supply of labour (sor-12) 9 dry brick on edge flooring in required pattern with bricks of class designation 150 on a bed of 12mm mud mortar, including filling joints with jamuna sand, with m-150 bricks. (ar/dsr-18/11.2) 10 cement concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (sor-281) 11 providing and laying 60mm thick i.s.i. mark factory made cement concrete interlocking concrete paver block made by block making machine with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over and including average 50mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per the direction of engineer-in-charge with conforming to is-15658 and irc:sp:63. (a.r.) 12 providing and laying i shapedinterlocking tiles rubber moulded 80mm thick precast cement concerete having plan dimension 200x(160+120mm) with compressive strength not be less than 40mpa (m-40) and weight 5kg, laid in required pattern over and including averege 50mm thick compacted bed fine sand and filling the joints with fine sand all complete as per direction of engineer-in-charge with conforming to isi - 15658-2006 sor/ a.r.grey colour. 13 m-150 brick work in 1:4 cement & coarse sand 2.2 f.m. mortar in foundation and plinth including supply of all materials, labour and t&p etc. requried for proper completion of the work. sor-305a 14 2 cm thick damp proof course with cement and approved coarse sand 1:2 with and including water proofing as ordered by the engineer incharge in the proportion as specified by the manufacturer including supply of allmaterials, labour, tools & plants etc. required for proper completion of the work and including proper curing & shutterings as necessary. ( sor-361) 15 m-150 brick work in 1:4 cement & coarse sand 2.2 f.m. mortarin superstructure including necessary cutting & moulding of brick as required thickness of walls not to be less than 1½ brick.including supply of all materials, labour and t&p etc. requried for proper completion of the work. sor-309 16 12mm cement plaster of mix 1:6 (1cement:6 corse sand) dsr-18/13.4.2 ar 17 15mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement : 6 coarse sand) (dsr-18/13.5.2/ar 18 cement concrete with 2 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work.sor-279a 19 plain cement concrete in open foundation complete as per drawing and technical specifications. pcc grade m25 using batching plant transit mixer & manual placing .morth-9.06 d/case-ii 20 steel work welded in built up sections/framed work including cutting, hoisting, fixing inposition and applying a priming coat of approved steel primer using structural steel etc. as required. (sail steel) 21 in gratings,frames,guard bar, ladder, raillings, brackets,dsr-18/10.25.2 ar 22 reinforced cement concrete in open foundation complete as per drawing and technical specifications. rcc grade m25 using batching plant transit mixer & manual placing .morth-9.06 e/case-ii 23 reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all coomplete. (sail steel) 24 tmt bars dsr-18/5.22.6ar 25 p/f in cement mortor 1:6 red sand stone. 26 painting or varnishing work in small areas withapproved superior quality ready mixed paint or varnish including supply of all materials, labour, tools & plants etc. required for proper completion of the work. paint to be used should confirm the isi no. 103-1950.for every coat on previously painted old wood or iron work including its sand papering, rubbing and cleaning as required for proper completion of work. sor-643 27 providing and fixing g.i. pipes complete with g.i. fittings and clamps, including cuttings and making good the wall etc.internal work - exposed on wall: 28 15mm dia nominal bore (dsr-18/18.10.1/ar) 29 providing and fixing brass bib cock of approved quality: 30 15 mm nominal bore (dsr-18/18.15.1/ar) 31 providing and fixing brass stop cock of approved quality: 32 15 mm nominal bore (dsr-18/18.16.1/ar) 33 providing and placing on terrace (at all floor levels) polythylene water storage tank, isi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (dsr-18/18.48/ar) 34 providing and fixing c.p. brass stop cock (concealed) of standard design and of approved make conforming to is: 8931: 5mm nominal bore (dsr-18/18.52.1/ar) 35 providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete: 36 15 mm nominal bore (dsr-18/18.18.1/ar) 37 providing and fixing unplasticised pvc connection pipe with brass unions: 38 30 cm length: 15 mm nominal bore (dsr-18/18.21.1.1/ar) 39 45 cm length: 15 mm nominal bore (dsr-18/18.21.2.1/ar) 40 providing and fixing wash basin with c.i. brackets, 15mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 41 white vitreous china wash basin size 630x450 mm with a single 15mm c.p. brass pillar taps. (dsr-18/17.7.2/ar) 42 providing and fixing pvc waste pipe for sink or wash basin including pvc waste fittings complete. 43 semi rigid pipe : 32mm dia. (dsr-18/17.28.1.1/ar) 44 providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end): 45 25 mm nominal bore (dsr-18/18.17.1/ar) 46 providing, laying, jointing and testing of pvc pipe (finolex make ring fit) of following dia 6kg/cm2 including all specials & fittings etc. as required for proper completion of work (the contractor has to arrange the source of water and require head for testing). (ar/gnida) 47 90 mm dia (o.d.) ar 48 110 mm dia (o.d.) ar 49 providing and fixing 1st quality ceramic glazed wall tiles conforming to is : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, inskirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (dsr-18/11.36/ar) 50 providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is: 7231, with all fittings and fixtures complete. 51 10 litre capacity - white (dsr-18/17.18.1/ar) 52 renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 53 float glass panes of thickness 5mm (dsr-18/14.5.2/ar) 54 finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials,labour, tools & plant etc. required for proper completion of the work. sor-660 55 providing corrugated g.s. sheet roofing including vertical/curved surface fixed with polymer coated j orl books, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 56 0.80 mm thick with zinc coating not less than 275gm/sqm (dsr-18/12.1.2/ar) 57 kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 58 25 mm thick dsr-18/11.26.1 ar 59 providing and fixing 1mm thick m.s. sheet door with frame of 40x40x6 mm angle iron and 3 mm m.s. usset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. using flats 30x6mm for diagonal braces and central cross piece 10.5.2 dsr-18/ar 60 supply of tanker including driver and p.o.l. sor-30 61 labour cess will be paid extra as per applicable 62 gst will be paid extra as per applicable