tender for construction work in kalsi composite school in development block gangho, 1 excavation in foundation in ordinary soil (loam, clay or sand) including lift upto 1.50 m.and lead upto 30 m. and including filling wateringand ramming of excavated earth into the trenchesor into the space between the building and thesides of foundation trenches or into the plinth andremoval and disposal of surplus earth as directed by the engineer-in charge upto a distance of 30 m. from the foundation trenches. (where machine can not move ) as per si no-251a. 2 earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50m. in depth and earth work in embankment to be in 20cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50m. lift and 30m. lead. the earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30m. distance as directed by the engineer incharge. (royality removed by govt.)for small works /abadi area.(where machine can not move ).as per s.i.no. 253(a). 3 concrete with 4 cm. gauge brick ballast, finesand of 1.25 f.m. and cement, in proportionof 12:6:1 in foundations and under floors,including supply of all materials, labour,tools & plants etc. required for proper completion of the work.as per si no-273. 4 m-150 brick work in one white lime &three surkhi mortar in foundation andplinth including supply of all materialslabour, tools & plants etc. required forproper completion of the work but in 1:6 (one cement & six fine sand of 1.25 f.m.) mortar. as per si no-303. 5 m-150 brick work in (1:4) one cement & four c/sand of 1.25 f.mmortar in foundation and plinth including all comp. as per si no-305 (a) 6 r.c.c. work with cement, approved coarsesand & 2 cm gauge approved stone grit inproportions of 1:2;4 in lintels of door &windows excluding supply of reinforcemenand its bending, but including its fixing and binding the same with 24 b.w.g.g.i. bindingwire and including necessary centering and shuttering etc. and supply of all materials,labour, tools & plants etc. required for proper completion of the work including cost of binding wire. the rate excludes making of drip course which shall be paid extra.as per si no-283. 7 r.c.c. work with cement, approved coarse sand & 2cm gauge approved stone grit in proportions of 1:1.5:3 for raft foundation and footing excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24b.w.g.g.i. binding wire and including necessary centering and suttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. the rate excludes making of drip course which shall be paid extra.as per s.i no-287a. 8 m-150 brick work in one white lime &three surkhi mortar in foundation andplinth including supply of all materialslabour, tools & plants etc. required forproper completion of the work but in 1:6 (one cement & six fine sand of 1.25 f.m.) mortarbut for walls of one brick thick, add for extra labour. as per si no-303+310. 9 const. of g.s.b. by providing well graded materials. as per technical specification clouse-401 (grading- 1). 10 providing and laying of interlocking concrete block pavement having thickness 60 mm as per drawings and technical specification clause1504. s.i. no. new item no.-13 11 sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc. labour and t&p etc. required for proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 m. above ground level and removal of rubbish upto a distance of 50 m. out side the periphery of area cleared. including cost of sand.as per si no-255. 12 12 mm thick plaster with cement and fine sand of 1.25 fineness modules in 1:3 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work.but with 1:4 cement and corse sand as per si no-584a. 13 12 mm thick plaster with cement and fine sand of 1.25 fineness modules in 1:3 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work.but with cement and fine sand of 1.25 fineness modules mortar in 1:6.as per si no-586.. 14 12 mm thick plaster with cement and fine sand of 1.25 fineness modules in 1:3 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work.but with cement and fine sand of 1.25 fineness modules mortar in 1:6 add for extra labour and materials for plaster over rough face of one brick wall..as per si no-586+596. 15 cement concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work.but with 2 cm. gauge stone grit instead of 4 cm. gauge as per si no-279a. 16 r.c.c. work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:2;4 in lintels of door & windows excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 b.w.g.g.i. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. the rate excludes making of drip course which shall be paid extra.but for slabs in 1:1.5:3.as per si no-284a. 17 r.c.c. work with cement, approved coarse sand & 2cm gauge approved stone grit in proportions of 1:1.5:3 for column and t-beam excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24b.w.g.g.i. binding wire and including necessary centering and suttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of the work including cost of binding wire. the rate excludes making of drip course which shall be paid extra.as per s.i no.289 18 m.s. work in plain work r.c.c i/c cutting, binding & placing all comp. as per s.i. no.- 504.(1.20%). 19 m.s. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work.but in m.s. grills /stair case railing / gates / trusher / racks etc.as per si no-502a. 20 filling of 40mm size brick ballast in soak pit. i/c all etc. comp. as per site engineer 2(b) 21 supply and fixing 110mm dia pvc pipe i/c all etc. comp. as per site engineer.30 a 22 cement concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work but in proportions of 8:4:1 stone ballast, coarse sand and cement. as per si no-281. 23 2.5 cm (1) thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1) graded approved stone grit, laid in panels finished with 3 mm. (1/8) floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3) thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½) gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, tools & plants etc. required for proper completion of the work.but without base concrete. as per si no-601a. 24 providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete of 2.2 cm. depth as per si no-631a. 25 supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. as per direction of engineer - in- charge as per si no_14.26 new item-4. 26 supply and fixing 6 mm. (¼) china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and tools and plants.as per si no-628. 27 providing wall putty on new surface with approvel quality material of berger/j.k./birla or similar make 2 coats as per ch-15 new item. 28 distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as berger, j&n, shalimar, asian paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, tools & plants etc. required for proper completion of the work. but for every coat after the first coat. as per si no-649+650. 29 finishing wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all materials, labour, tools & plant etc. required for proper completion of the work.but for each coat of water proof cement paint after the first two coat to give an even shade as per si no-660+661. 30 painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one sq. metre) paint (british antesol or equivalent) including supply of all materials, labour, tools & plants etc. required for proper completion of the work. paint to be used isi marked.but for every coat after the first coat. as per si no-644+645. 31 providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or european type water closet (anglo indian w.c. pan) with seat & lid fixed with c.p. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. as per si no-21.29. 32 p/f of w c pan (indian type) size 580x440 mm hindware i/c all cost comp.as per s.i. no.-21.12 ch.-21 33 s/f of urinal size 340x410x265 mm i/c all comp. 34 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps,32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require:white vitreous china wash basin size 630x450 mm with a single 15 mm c.p. brass pillar tap as per si no-21.16 35 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. as per si no-21.25. 36 providing and fixing toilet paper holder standrad size isi marked c.p. brass as per direction engineer-in-charge as per si no-21.35. 37 s/f of wash besin hind ware pvc waist pipe of size i/c all comp.si no.-21.24, ch.-21b. 38 providing and placing on terrace (at all floor levels) polyethylene water storage tank lsi: 12701 marked(sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of engineer-incharge. as per si no-21.11. 39 providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with c.p. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. as per dsr 17.33. 40 providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. as per dsr 17.71. 41 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge.as per si no-21.01 (a)15mm dia 42 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge.as per si no-21.01 (b)20mm dia 43 providing and fixing c.p. brass stop cock(concealed) of approved quality confirming to isistandards is 8931 ) 15mm nominal bore. as per 21.09. 44 providing and fixing c.p. brass bib cock ofapproved quality confirming to is:893115mm nominal bore. as per si no-21.07. 45 wiring point for light with 1.00sq mm f.r. pvc insulated singhle core multistand copper conductor cable in pvc conduct pipe with 1 no. earth wire & piano type witch on phenolic back light sheet cover etc. as per s.i. no.- 131 (c) + 187 (a) 46 wiring point for plug i/c all ewtc. comp as per si no. 134 c+ 187 c 47 wiring point for exaust fan i/c all etc. comp as per si no. 133c + 187 a 48 s/f of 10sqmm pvc core cablle i/c all etc. comp as per si no. 501 b 49 s/f of 6 amp to 32 ampspn mcb (10ka)i/c all cost comp.as per s.i. no.- 1002 cat (a) 50 s/f of 63 amp isolator i/c all etc. comp as per si no. 1017 cat (a) 51 providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting and same with necessary stainless steel nuts and bolts complete, including fixing the rialing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineerin-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, botls,fastners etc.) as per si no-10.27 new item 52 s/f ofsign board i/c all etc. comp. as per sanction ed by se red sre.