tender for construction of temporary shed in house number bg-1 located at 17a mall avenue state property colony, work of laying kota stone on the floor of the rear courtyard and other miscellaneous civil related works, 1 providing and layeing in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level:1:5:10 (1 cement :5 coasre sand ( zone-iii) :10 graded stone aggregate 40 mm nominal size dar-4.1.10 2 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level:-1:1.5:4 (1 cement :1.5 coasre sand ( zone-iii) :4 graded stone aggregate 20 mm nominal size (4.1.2) 3 mild steel or iron plain work such as reinforcement for r.c.c work including straightening cutting ,bending, placing in position and binding all complete (dar no-5.22.6)(dar-2018 page-226). 4 brick work with common burnt clay (non madular) brick of class- 150 in superstructure above plinth level up to floor v level in all shape and sizes in cement mortar 1:4 ::(1 cement :4 coarse sand )( dar 6.4.1) 5 12 mm cement plasterof mix ;1:4 ( 1 cement :4 coarse sand ) )dar no-13.4.1 6 providing and laying vitrufied floor tile in different sizes ( thickness to be specified by the manufacturer)with water absorption less than 0.08% and comferming to is :15622 , of approved make in all colour and shade , laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand ) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigment etc complete(ch-13- ref- 11.41.2) ( size of tile 600x600 mm ) 7 providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m² dar no-12.1.1 8 steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required::in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (10.25.2) 9 providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m² dar no-12.1.1 10 supply of salwood wrought framed single rebates and fixed including simple moulding straight work as in chaukhat frame including supply of all materials, labour, t&p etc. required for proper completion of work. 11 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(d.s.r item-13.80) 12 distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :newwork(twoormorecoats)overandincludingwater thinnable priming coat with cement primer having voc content less than50 gram/litre 13.41.1 13 provding and fixing isi marked flush door shutters conforming to is : 2202 (part-1) non- decorative type, core of block board contruction with frame of 1st class hard wood and well matched commercial 3 ply veneers on both faces of shutter:35 mm thick including isi marked stainless steelbutt hinges with necessary --9.21.1