tender for s/e for name of work-s/e for renovation of service road of imiliya minor from km 0.00 to 1.200, 1 providing laying spreading and compactingstoneaggregates of specific size to water bound macadamspecification including in spreading uniform thicknesshand packing rolling with smooth wheel roller 80-100 kn.in stage to proper grade and camber applying and brooming stone screening /binding material to fill up the interstices of coarse aggregate watering and compacting to the required dencity grading 2 as per technical specification clause 405 2 providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405. 3 providing and applying primer coat with bitumen emulsion ss-1 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means as per technical specification clause 502. 4 providing and applying tack coat with bitumen vg-10 using distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503. 5 providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in hmp, laying with paver finisher and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of type cas per technical specification clause 508. 6 providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type c as per technical specification clause 510 7 road marking with hot applied thermoplastic compound with reflectorising glass beads on bituminous surface. morth-803 8 note :- g.s.t.18% will be paid extra.