tender for annual plan-karimba gp - 2023-24 - glps kalladikkode maintenance - ward 5-project no - 64 / 23-24-general civil work; building maintenance 2 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar 3 50.6.1.5:solid block masonry using pre cast solid blocks ( factory made ) of size 30x20x20cm or nearest available size confirming to is 2185 part i of 1979 for super structure up to floor two level thickness 20cm and above in: cm 1:6 ( 1 cement : 6 coarse sand ) etc complete 4 5.9.3:centering and shuttering including strutting, etc. and removal of form for:suspended floors, roofs, landings, balconies and access platform 5 5.3:reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15^{0< / sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 ( 1 cement : 1.5 coarse sand ( zone iii ) : 3 graded stone aggregate 20 mm nominal size ) . 6 5.22.6:steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more 7 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand ) 8 13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand ) 9 11.36:providing and fixing i st quality ceramic glazed wall tiles conforming to is : 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer -in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 10 11.37:providing and laying ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) , of 1st quality conforming to is : 15622, of approved make, in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , including pointing the joints with white cement and matching pigment etc., complete. 11 11.41.2:providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , including grouting the joints with white cement and matching pigments etc., complete.size of tile 600 x 600 mm. 12 14.43:removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 13 14.66.1:finish walls with acryllic smooth exterior paint of required shade:old work ( two or more coats applied @ 1.67 ltr / 10 sqm ) on existing cement paint surface 14 13.60.1:wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:two or more coats on new work 15 13.61.1:painting with synthetic enamel paint of approved brand and manufacture to give an even shade:two or more coats on new work 16 15.13.1:taking out doors, windows and clerestory window shutters ( steel or wood ) including stacking within 50 metres lead:of area 3 sq. metes and below 17 10.25.2:item shifted to sub head 14 as item 14.73item shifted to head 14 as item 14.74steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 18 10.28:providing and fixing stainless steel ( grade 304 ) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature ( wherever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i / c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. ) 19 50.18.7.2.2:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step pvc solvent cement and testing of joints complete as per direction of engineer -in-charge 20 mm dia 10 kgf / cm2- internal work - exposed on wall 20 18.54.1:providing and fixing ptmt bib cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms}