material supply for kombankallu anganvadi , supplying variuos materials , stone aggregate(single size): 40 mm nominal size , stone aggregate(single size):20 mm nominal size , coarse sand (zone iii) , portland cement , hire charges of concrete mixer 0.25 to 0.40 cum with hopper , vibrator (needle type 40 mm) , sundries , stone for masonry work , wall form panel 1250x500 mm , corner angle 45x45x5 mm 1.50 m long , 100 mm channel shoulder 2.5 m long , double clip (bridge clip) , single clip , m.s. tube 40 mm dia , stone aggregate(single size): 10 mm nominal size , solid blocks of size 30x20x20cm , solid blocks of size 30x20x15cm , twisted steel/deformed bars , structural steel such as tees, angles, channels and r.s. joists , red oxide zinc chromate primer , adjustable span eso+si (2.35-3.40) , adjustable telescopic prop 3 m (2.02-3.75m) , beam clamp 300-380 mm (450-1070 mm) , wall form panel 1250x450xmm , corner angle 45x45x5 mm 2.50 long , column clamp 450x1070 mm , prop 2 m (2-3.5m) , second class kail wood in planks , second class kail wood in scantling , hollock ballies 125 mm diameter , fine sand (zone iv) , vitrified floor tile 60x60 cm , ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black , ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc. , mild steel tubes electric resistant or induction butt welded , mild steel round bar 12 mm dia and below , flats up to 10 mm in thickness , bright finished or black enameled mild steel butt hinges 100x58x1.90 mm , factory made glass reinforced plastic door frame 90x45 mm i/c carriage , 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage , powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm , bright finished or black enameled mild steel screws 40 mm , bright finished or black enameled mild steel screws 20 mm , mild steel tubes hot finished welded type , welding by electric plant , float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) , multi surface paint , special primer (c.w) , synthetic enamel paint in black or chocolate shade , black plastic seat (soild) with lid c.p.brass hinges and rubber buffers , vitreous china pedestal type wate closet , flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) , vitreous china flat back wash basin 630x450 mm , 15 mm c.p.brass tap , c.p. brass waste 32 mm , c.i. bracket for wash basin and sinks , stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm , semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings , polyethylene water storage tank with cover and suitable locking arrangemnet , pvc pipe 110 mm outer dia 6kgf/cm2 , pvc pipe 15 mm outer dia 10kgf/cm2 , pvc pipe 20 mm outer dia 10 kfg/cm2 , pvc pipe 32 mm outer dia. 10kgf/cm2 , pvc pipe 40 mm outer dia. 10kgf/cm2 , pvc pipe 63 mm outer dia . 6kgf/cm2