providing following materials for work constructing one room school building dhagewadi at chambhurdi providing following materials for work constructing one room school building dhagewadi at chambhurdi tal shrigonda dist ahmednagar , providing following materials for work constructing one room school building dhagewadi at chambhurdi tal shrigonda dist ahmednagar , item no. 1 : excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as irected, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) , item no. 2 : excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) , item no. 4 : providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete.with natural sand/v.s.i. quality artificial , item no. 5 : providing and laying in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. work in foundationslikeraft,stripfoundations,grillageand footingsof r.c.c. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand , item no. 6 : providing and laying cast in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand , item no. 7 : providing and laying cast in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant(panmixer)etc.complete.withnaturalsand/v.s.i.quality artificial , item no. 8 : providing and laying cast in situ/ready mix cement concrete m-20 of trap/ granite/ quartzite/ gneiss metal for r.c.c. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand , item no. 9 : providing and laying cast in situ/ready mix cement concrete m-20 of trap/ granite / quartzite/ gneiss metal for r.c.c. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand , item no. 10 : providing and fixing in position tmt - fe - 500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking thebars,bindingwithwiresortackweldingandsupportingas required complete. , item no. 11 : providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. complete. , item no. 12 : filling in plinth and floors with contractors material/brought from outside and approved by engineer incharge in layers of 15 cmto 20 cm including watering and compaction etc. complete. , item no. 13 : providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. complete , item no. 14 : providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 with neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. , item no. 15 : providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with neeru finish to concrete or brick surfaces,inallpositionsincludingscaffoldingandcuringetc. complete. , item no. 16 : providing internal cement plaster 20mm thick in single coats in cement mortar 1:4 without neeru finish,to concrete,bricksurface,inallpositionsincludingscaffoldingand curing etc.complete. , item no. 17 : providing and laying polished shahabad stone flooring 25mm to 30mm thick and required width wide in plain/ diamond pattern on a bed of 1:6 c.m. including cement float, filling joints, with neat cement slurry, curing, polishing and cleaning etc. complete. , item no. 18 : providing sills of polished kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. , item no. 19 : providing and laying machine cut machine polished shahabad stone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. , item no. 20 : providing and fixing solid core flush door shuttercommercial in single leaf 30 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel hinges and cromium plated fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. , item no. 21 : providing and fixing 50 mm x 50 mm mild steel square pipe framed steel windows of various sizes as per details with welded square bars 12 mm at 10 cm center to center without hot dip zinc coating without / with ventilator including fabrication, glazing with plain / obscured glass panes 5 mm thick of approved type and quality, all fixtures and fastenings and finishing with one coat of primer complete. as directed by engineer in charge. , item no. 22 : providing and applying two coats of waterproof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. , item no. 23 : providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. , item no. 24 : providingandfixingcoldrolledsteelhollow door frame 105mm x 60mm for anysizes includingholdfast hinges,tie memberswithredoxide andgray paintetc. complete as per i.s.i. specifications and codeofpracticeprescribed including anticorrosive treatmentas directed by the engineer. , item no. 25 : providing and applying two coats of lead/zinc base oil paint/bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete.(excluding primer coat). , item no. 26 : providing and layingdampproofcourse50mm thick in m20cementconcrete layerand bitumen/ using cement with waterproofing compoundcuring,formwork etc. complete. , item no. 27 : providing and fixing 40mm diameter and 1.5 mm thick stainless steel hand railing in s.s.304 gradeincluding fabricating ,fixtures,errecting,necessary welding,grinding, finishing, buffing to stainless steel pipe etc. complete , item no. 28 : providing and fixing board displaying information, such as name of work, tender cost, name of contractor, work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on m.s.angle of size 35 x 35 x 3 mm frame with properly cross braced m.s. angles of size 35mmx35mmx3mm duly painted including two m.s. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. spec. no. as directed by engineer in charge , item no. 29 : material testing charges