repairs to walls , floors, sanitary, water fittings, iron magnory and miscellaneous items in otm building under ge ( central ) pune -1 demolition of brick work or stone / boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles incl removing from site complete all as directed. 2 taking down cement plaster on brick / block walling / concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc incl removing rubbish off the premises complete all as directed. 3 dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) , removing tiles and rubbish off the premises all as directed. 4 demolition of stone slabs and tiles of any description and of any thickness in floors, aprons etc laid bedded and pointed in any mortar including removing u / s materials from site complete all as directed. 5 dismantling wall and ceiling boards ( fibre, pulp, insulation, etc. ) or insulation boards / slabs / blankets, any thickness, including cover fillets complete and removing u / s materials from site of work all as directed. 6 dismantling battens for tiles, shingles etc. of any size including tilting fillets, spaced n exc.15 cm complete all as directed and removing from site complete. 7 dismantling single layer mangalore pattern or similar tiles in roofing including ridge tiles complete and removing from site all as directed. 8 taking down chowkats or frames with shutters ( without taking off shutters from the frame ) n. exc. 1.5 sqm each and removing from site complete all as directed. 9 taking down angle iron / wooden chowkats or frames with shutters ( without taking off shutters from the frame ) exc. 1.5 sq. m but n. exc.4sq m each and removing from site complete all as directed. 10 taking down shutter of any description exc 1.00 sqm and n exc 2.0 sqm each. 11 refixing of door shutter after rescuring or easing and adjusting in the same opeing area exc 1.00 sqm but n exc 2.00 sqm each. 12 dismantling water tanks of capacity exc. 250 ltrs and not exc. 500 ltrs and removing from site complete all as directed. 13 all as per item 12 above but capacity exceeding 500 ltrs and not exceeding 1000 ltrs 14 taking up or down steel tubing 15 mm bore & connections including cleaning for refixing or removing from site complete all as directed. 15 all as per item no 14 here-in-before but 20mm bore. 16 m&l for precast cement concrete block masonry exceeding 10cm in width with solid blocks of pcc ( 1:5:8 ) gde d-5 and setting in cm 1:6 complete all as specified and directed. 17 all as per item no 16 here-in-before but except precast block. 18 m & l for cutting chases in existing brick or block walling pinning in. making good to facings where required and pointing in cement mortar 1:4 for concealed water tubing and making good, cutting not exc 10 cm girth complete all as directed. 19 m & l ii nd class hard wood battens, clean sawn, at 30 cm centres, sectional area exceeding 5 sqcm but not exceeding 15 sqcm, fixed with nails all as specified and directed. 20 all as per item no 19 here-in-before but except timber. 21 s&f 30 mm thick flush shutters, solid core construction, with particle board core and one face is covered with decorative face veneer with lipping / frame to match, complete all as specified and directed. 22 s & f 30 mm thick ii nd class hard wood glazed and skeleton shutters, open rebated prepared to receive guaze, edges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing glass etc size of members of shutters in ssr part- i, section 8, clause 8.24 ( a ) complete all as specified and directed. 23 s&f solid pvc door frame of size 50mmx47mm made out of 5mm plain colour pvc sheet, reinforced with m.s square tube, supplying & fixing in opening as per specifications, drawings complete all as directed. 24 s&f factory made solid panel pvc door shutter 30mm thick ( style ) consisting, of frame made out of m.s tubes for top & bottom rails m.s frame shall be covered with heat molded plain co lour pvc ‘c’ channel having a pvc sheet strip of 20mm width struck inside with solvent cement for steel & plain co lour pvc sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour pvc sheet to be fitted in the ms frame welded / sealed to the stile & rails with suitable pvc sheet beading , and joined together with solvent cement, supplying & fixing in the frame at site all as per specification & drawing complete. 25 s & f 100 mm long butt hinges extruded aluminium alloy with galvanised mild stell pin, anodiesed fixed type b-21 complete all as specified and directed. 26 s&f 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed. 27 s & f 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. 28 s & f 300 mm long aluminium alloy , anodised sliding door bolt with hasp , staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified and directed. 29 s&f stainless steel fancy type curtain rod 25mm dia complete all as specified and directed. 30 s & f stainless stell fancy type bracket suitable for 25mm dia curtain rod ( minimum projection from wall 75mm ) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed by engineer-in-charge. 31 m & l aluminium anodised powder coated ( minium thikness 50 miron ) frame for partition / door / window / ventilator with one or more rebate including jointing cleat complete all as specified and directed. 32 s&f aluminium powder coated single leaf door on pivots alongwith hydraulic door closer door lock , handle, 5mm th plane glass fixed with rubber beading in top panel and glazing clips ms clamps and 12mm th laminated particle board as bottom pannel both side laminated ) using following sections as given in jindal catlogue all as directed by engr-in-charge. 33 s&f in repairs three track sliding window with two or more shutter witth 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.40 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of jindal or of equivalent make complete all as specified directed by engr-in-charge. n ( a ) bottom frame 20620 n ( b ) top frame & verrtical 20621 n ( c ) handle ( side ) 20606 n ( d ) shutter inter lock 20724 n ( e ) shutter top & bottom 20844 n ( f ) glazing clip 19352 34 s&f ventiltors / louvers with parttially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of jindal or of equivalent make and rubber beading etc all as directed. n ( a ) sp 20048 n ( b ) glazing clips 19352 35 m & l roof tiles, mangalore pattern, class aa , inerlocking at side joints, laid dry complete all as specified and directed. 36 all as per item no. 35 here-in-before but except tiles. 37 m&l for 12 mm thick gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 mm thick in size, of approved brand / make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick g.i. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick g.i. suspension wires spaced at 1200 mm on main runners including making niches for fans / light all as specified and directed. 38 m & l providing and fixing gypsum board 12mm thick in ceiling fixed with screw ( as per manufacturers instructions ) to gl frame work for seamless ceiling comprising of gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with gl cleat and steel expansion fasteners with and including ceiling section ( not exc 1.2 m length ) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. g.i. ( upto 1200mm length ) adjusting level fixed to roof slabs by means of ceilling cleats made out of g.i. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including applying two coats of oil bound distemper over a coat of primer on ceiling complete all as specified and directed. 39 s & f 18 mm thk plywood laminated on one side with decorative choice lamination & other side white lamination of any shade as in cupboard shutter or kitchen cabinet and in shelves including necessary lipping etc complete all as specified and directed. 40 m&l for 75mm thick pcc ( 1:3:6 ) type c2 ( using 20mm graded aggregate ) as in plinth protection / hard standing, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. 41 m&l non skid ceramic coloured tiles 7to8mm thick, ( square / rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer as in cm 1:6 all as specified and directed. 42 m&l for coloured glazed ceramics tiles 300x200x7to8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in cement mortar 1:3 on stone / brick / concrete masonry surfaces all as specified and directed. 43 m & l for 600 x 300 x 6 to7 mm thick, coloured glazed vitrified tiles as in skirting / dado laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10mm thick backing coat in cement mortar 1:3 including triangular filleting on top in cement mortar 1:4 complete all as specified and directed. 44 m & l ( light shade ) virified ceramic tiles 10 mm thick ( square / rectangular ) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. 45 all as per item no 44 here-in-before but in skirting set and jointed in neat cement slurry and pointed in coloured cement to match with tiles laid over and including 10mm thick backing coat in cement mortar ( 1:3 ) including triangular filleting on top in cement morter ( 1:4 ) complete all as specified and directed. 46 all as per item no 44 here-in-before but area of each tiles exc 0.42 sqm but n exc 1.00 sqm. 47 all as per item no 45 here-in-before but area of each tile exc 0.42 sqm but n exc 1.00 sqm 48 all as per item no 44 here-in-before but area of each tile exc 0.42 sqm but n exc 1.00 sqm. 49 m&l for hand cut kota stone flooring 20 to 25 mm thick, laid, jointed with grey cement slurry and pointed with coloured cement to match with the shade of kota stone as in floor, treads etc, laid over and including screed bed 20 mm thick in cement mortar 1:6, including rubbing and mirror polishing complete all as specified and as directed. 50 m&l for pre-polished machine cut kota stone 18 to 20 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of kota stone slab, laid over and including 10 mm thick backing coat in cement mortar 1:4 all as specified and as directed. 51 m & l granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring in cm 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer 15 mm thick, in cm 1:6 on stone masonry surfaces. 52 rounding of edges of stone slabls one edge as on plateform / counter etc all as specified. 53 m & l cleaning of granite flooring with oxalic acid and water, broowing and wax polishing including filling of joints with white cement and pigment complete all as specified and directed. 54 m & l chamfer, splays or arris in facework to granite exc 15 mm but n exc 50 mm wide complete all as specified and directed. 55 m&l for machine pressed coloured glossy finish precast concrete interlocking paver block any shape and size confirming to is 15658 -2006 of 60mm thickness, m-35 grade including 30 mm thick grit / stone dust cushioning all as specified. 56 m & l for rendering 10mm thick in cement mortar 1:6 on brick / concrete surfaces finished even & smooth with a thin layer of sagol complete all as specified and directed. 57 m & l for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 2 mm thick wall care putty complete all as specified and directed. 58 m & l preparing surfaces of wood or wood based material new or old if any description or girth treating end of post, back of chowkats etc with tar or coal tar black paint complete all as specified and directed. 59 m & l for two coats of creosoting on tiles or slate battens any size, spacing complete all as specified and directed. 60 all as per item no. 59 here-in-before but one coat on old surfaces. 61 complete removal of existing treatment and m&l for applying 2mm thick wall care putty and applying two coats of acrylic emulsion paint on walls all as spd and directed. 62 complete removal of existing treatment and applying two coats of cement base paint white or tinted, on walls, all as specified and directed. 63 m&l for complete removal of existing treatment and applying two coat of weather proof exterior emulsion paint on walls over a coat of primer complete all as specified and directed. 64 m&l for preparation of old decorative surfaces and providing one coat of weather proof exterior emulsion paint on walls complete all as specified and directed. 65 s&f 3mm thick sheet glass ordinary quality & glazing with oil putty / wooden beading in squares n. exc. 0.50 sqm in each pane complete all as specified and directed. 66 s & f 15 mm bore gi tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floors all as specified & as directed. 67 s & f 20 mm bore gi tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floors all as specified & as directed. 68 s & f in repairs 15 mm bore pillar taps, fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with long screwed shanks and fly nuts, complete all as specified and directed. 69 s&f in repairs pillars taps cp 15mm dia , cast copper alloy with long screwed shanks of and flynuts complete, screwed for iron pipe aquisense sensor fauet for whb with base flange, complete all as specified and directed. ( make : jaquar cat no. snr-chr -51027 ) or equivalent model from the specified make given in ps complete all as specified and directed. 70 s&f in repair, 15mm dia bib tap of cast copper alloys chromium plated fancy type with fancy handle with wall flange screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed. ( make : jaquar cat no. con- 047kn ) or equivalent model from the specified make given in ps complete all as specified and directed. 71 s&f in repair, 15mm dia angular stop cock with wall flange cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. n ( make : jaquar cat no. con- 053kn ) or equivalent model from the specified make given in ps complete all as specified and directed. 72 s & f in repairs 15 mm bore bib taps, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed. 73 s & f in repairs 15 mm stop valves, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed. 74 s & f in repairs brass chromium plated tubular towel rail 20mm dia d type 60cm long. 75 s & f in repairs pvc low level flushing cistern 10 ltrs capacity isi marked incl all internal fitting, pair of bracket, including inlet / outlet pvc pipe connections etc complete all as specified & directed. 76 s&f in repair, vitreous china , full stall type urinal , coloured with urinal censor complete with necessary fittings complete all as specified and as directed . make :- hindware , senso art cat no 60018 star white or equivalent model from the specified make given in ps. 77 s&f shower rose fancy type bass chromium plated 100 mm dia heavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unions and taking down the old un serviceable shower roses all as directed by eic. 78 s&f in repairs vitreous china ceramic white single peice wc ( s or p trap ) with uf soft close seat cover, hinges, accessories set, size 655 x 370 x 770 mm , cat no. s1021109 of cera or equivalent model from the specified make given in ps complete all as specified and directed. 79 s&f for oval shaped coloured vitreous china whb table top colonia snow white, fancy type of overall size 595 x 380 mm, cat no 7751 of cera or of equivalent make specified here-in-after including 32 mm cp waste coupling, pvc waste pipe etc complete, including granite slab counter of black colour as approved and of size 1.20mtr x 0.60 mtr includingrounding edges etc com cutting nitches rounding edges etc complete, orizontally supported by 01 no of 35 mm thick cuddappa stone slab one side mirror polished complete all as specified and directed by engr-in-charge. 80 s & f in repairs 600mm x 450mm x 5.5mm thick bevelled edge mirror of selected quality glass mounted on 6 mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with aluminium beading all around complete all as specified and directed. 81 s & f cp towel rail 20mm dia and 600mm long including brackets conforming to cat no. acn-1111n of jaquar or equivalent model from the specified make given in ps, complete all as specified and directed. 82 s & f in repairs, brass cp soap dish conforming to cat no. acn-1131n as mentioned of make jaquar or equivalent model from the specified make given in ps, complete all as specified and directed. 83 s & f for health faucet conforming to cat no. ald-573 as mentioned of make jaquar or equivalent model from the specified make given in ps, complete all as specified and directed. 84 s & f cp toilet paper holder conforming to cat no. acn-1151 n of jaquar or equivalent model from the specified make given in ps, complete all as specified and directed. 85 s & f 15 mm chromium plated 2 way bib cock with wall flange confirming to cat no. f2002161 of cera or equivalent model from the specified make given in ps, complete all as specified and directed. 86 s & f in repairs vitreous china squatting pan orissa pattern of size 580 mm x 440 mm white with integral foot rests ( excluding flushing cistern and flush pipe ) including provn of cement concrete bedding complete . 87 s & f in repairs vitreous china wash down water closet pan ( pedesal pattern ) , white including connection to drain ( or outgoing pipe ) and to flushing pipe with and including plastic water closet seat white closed pattern with flat bottom, cover and mild steel hinging device. 88 s & f in repairs steel grating of 100mm in size for nahni trap / floor including jointing complete in repairs. 89 s&f in repairs pvc floor trap with steel grating including jointing with solvent cementof 75 mm dia complete all as spd and directed 90 s&f in repairs pvc gully traps, square 125 / 110mm size with grating including jointing to waste pipe in cement joint, dia of outlet 100mm complete all as specified and directed. 91 s & f vitreous china urinal, half stall type, white ( excluding flushing cistern, flush pipe and waste pipe ) 92 s&f 500 litres capacity rotational moulded polythylene water storage tanks of tripple layers ( cylindrical vertical with colsed top ) hoisted and fixed in postion complete all as spd and directed. 93 all as per item no 92 here-in-before but 1000 ltres capacity. 94 s & f in repairs door closer ( alminium extruded section body ) hydraulically regulated, designation no. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg 95 s & f in repairs brass door closer hydraullically regulated, designation no.1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg 96 m&l grinding of terrazo tileflooring including watering &cleaning of floors including wax polishing complete. all as specified & directed by engr-in-incharge 97 m&l lacquer finishing over wooden floor including cleaning of surfacesby brush complete etc all as specified & directed by engr-in-incharge 98 ( i ) s&f stainless steel ( ss ) hand railing 50 mm bore made of stainless steel ( grade-304-316 corrosion resistance ) withangle, fi, squqre bar and similar pipe with ornamental and intricate dsign. complete all as specified and as directed by engr-in-charge 99 s & f 75 mm bore pvc ( swr ) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old one and removing from site complete all as specified and directed. 100 all as per item no 99 here-in-before but 110 mm bore. 101 s & f 75 mm bore pvc ( swr ) bends any radius complete all as specified & directed. 102 all as per item no 101 here-in-before but 110 mm bore. 103 s & f 75 mm bore pvc ( swr ) bends any radius provided with access door complete all as specified & directed. 104 s & f 75 mm bore pvc ( swr ) vent cowl complete all as specified and directed.