special repair to bldg. no. 200 ( block of 6 qtrs ) in cw lines andprovision ofsteel utensil rack in 118 x jcos / or govt md accnin cw lines & albert ekka line and provision of 50 xexhaust fans for jcos md accn in cw lines in the area ofage b / r-i under ge ( n ) ambala cantt ; 1 schedule a part-i ( b / r items ) taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed by the engineer-in-charge. 2 demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed by the engr-in-charge. 3 m&lbrick work with sub class b old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by the engineer-in-charge. 4 m&lbrick work with sub class b old size bricks straight or curved on plan to anyradius in half brick thick wall built in cement mortar 1:4 complete all as specified and as directed by the engineer-in-charge. 5 m & l rendering 15 mm thick on brick work or concrete wall surfaces in cement mortar 1:4including mixing water proofing compound @ 2% by weight of cement or as per manufacturers instruction and finished fair and even without using extra cement complete all as specified and as directed by the engineer-in-charge. ( wpc shall be measured and paid for separately ) 6 material and labour rendering 10 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:6 andfinishedeven and fair without using extra cement complete all as specified and as directed by the engineer-in-charge. 7 supply only water proofing compound complete all as specified and as directed by the engineer-in-charge. 8 material and labour rendering 05 mm thick on fairfaces of brick work or concrete ceilingsurfaces in cement mortar 1:3 andfinishedeven and smooth without using extra cement complete all as specified and as directed by the engineer-in-charge. 9 m&l preparation of newly plastered / unplastered surfaces of walls and applying two coats of oil bound distemperwith painting roller over a coat of alkali resistant primer over and inlcuding 1mm to 2mm thick wall care putty white cement based in two or more coats to achive smooth surfacecomplete all as specified and as directed by the engineer-in-charge. 10 m & l complete removal of existing treatment on walls ( any number of layers ) by scrapping with steel scrappers or any other means, washing down with water to remove loose particles etc and applying two coats of oil bound distemperwith painting roller over a coat of alkali resistant primer over and including 1mm to 2mm thick wall care putty white cement based in two or more coats to achieve smooth surfacecomplete all as specified and as directed by the engineer-in-charge. 11 m&l preparation of new plastered / unplastered surfaces of brick / concrete ceiling and applying three coats of white lime wash complete all as specified and as directed by the engineer-in-charge. 12 m&l preparation of old decorated brick / concrete, plastered / un plastered surfaces ofceiling and applying two coats of white lime wash complete all as specified and as directed by the engineer-in-charge. 13 m&lpreparation of newly plastered surfaces of wall and applying two coats of cement based paint complete all as specified and as directed by the engineer-in-charge. 14 m & l complete removal of existing treatment on walls ( any number of layers ) by scrapping with steel scrappers or any other means, washing down with water to remove loose particles etc and applying two coats of cement base paint complete all as specified and as directed by the engineer-in-charge. 15 m & l complete removal of existing treatment on walls ( any number of layers ) by scrapping with steel scrappers or any other means, washing down with water to remove loose particles etc and applying two coats of 100% premium acrylic emulsion paint having voc less than 50 gm / litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade ( company depot tinted ) with silicon additives @ 1.43 litre / 10 sqmover and including priming coat of exterior primer applied @ 0.90 litre per 10 sqmcomplete all as specified and as directed by the engineer-in-charge. 16 dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) , removing servicable tiles to store and rubbish off the premises complete all as specified and as directed by the engineer-in-charge. 17 m & l25 mm thick pcc 1:2:4, type b0 as in sub base of floor ( using 12.50mm gradedcrushed stone aggregate ) , finished even & fair without using extra cement complete all as specified and as directed by the engr-in-charge. 18 m&lnon skid coloured ceramic tiles joint freepremium / 1st quality 7 to 8 mm thick, ( square / rectangular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over andinculding15mm thick screed bed in cm 1:6 complete all as specified and as directed by the engineer-in-charge. 19 m&lnon skid coloured ceramic tiles joint free premium / 1st quality of same description as of floor tiles in serial item no18 abovebut 100mm to 200mm heightas in skirting, set and jointed in neat cement slurry and pointed in white or colouredcement mixed with pigmentto match over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4complete all as specified and as directed by the engineer-in-charge. 20 material and labour glazed ceramic coloured tiles joint free 1st quality in vertical surfaces / skirtings / dados of size 450x300x7mm thick / 300 x 600 x 7 mm thickor nearest size as required , set and jointed in neat cement slurry and pointed in white or colouredcement mixed with pigmentto match over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4complete all as specified and as directed by the engineer-in-charge. 21 m&lnon skid coloured ceramic tiles joint freepremium / 1st quality 7 to 8 mm thick, ( square / rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over andincluding15mm thick screed bed in cm 1:6 complete all as specified and as directed by the engineer-in-charge. 22 material and labour for marble work, baroda green, 16-18mm thick, in one piece in width and length not less than 1.8 m ( except in case of slab is more than 1.80 meter and less than 2.40 meter smaller size as approved by engr-in-charge may be used ) table rubbed & polished in shelves, coocking plateform, tread of stair case, window cill and similar locationetc including 15mm thick bedding layer in cement mortar ( 1:4 ) including pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match with marble including rounding of exposed edges and finally granite finish polishing complete all as specified and as directed by the engineer-in-charge. 23 m & l formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, chajjas including edges etc., work in rough finished flat surfaces of concrete complete all as specified and as directed by the engineer-in-charge. 24 demolition of reinforced cement concrete in roofs, floors, beams, chajjas, staircases, landings and similar suspended work ( reinforcement cut as required to facilitate demolition ) complete all as specified and as directed by the engineer-in-charge. 25 m & l reinforced cement concrete 1:1-1 / 2:3 ( nominal mix ) using 20mm graded crushed stone aggregates as inchajjas, beams, lintels over 1.5 mtr spanand the like complete all as specified and as directed by the engineer-in-charge. 26 m & lprovidingpcc precast 1:2:4 type b1 using 20mm gradedcrushed stone aggregate as in landings, precast cover slabs ( for manholes etc. ) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including chamfers, weathering, throating etc and setting in cement mortar1:4 complete with joints to match, complete all as specified and as directed by the engineer-in-charge. 27 m & lmild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, walk ways, railingsconforming to fe.290.gde-e-165 complete all as specified and as directed by the engineer-in-charge. 28 m