bill of quantities for repairing, renovation and allied works of 33 / 11 kv sub station s / s geegla, nanau, barbana district hathras. 1 excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (csi no. 4.01) 2 earth filling under floors and/or sub station area including cost of earth when obtained from with in 8 kmoutside uppcl area including its roylty and carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. (csi no. 4.10) 3 concrete with 4cm gaugestone ballast, coarse sand (f.m. 1.8 to 2.5) & cement in proportion of 12:6:1 in foundations &under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (s. no. 5.02) 4 concrete with 4cm gauge i class brickballast, coarse sand (f.m. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (csi no.5.01 ) 5 cement concrete with 2cm gauge approved hard stone ballast,coarse sand (f.m. 1.8 to 2.5) and cement in proportion of 4:2:1including supply of all materials, labour,side shuttering ifrequired and t&p etc. required for proper completion of work. (csi no. 5.06) 6 concreting of 40 mm thick rcc trench covers in mild steel framework with rcc 1:1.5:3 in cement,chopan coarse sand(f.m. 1.8 to 2.5) and 2cm gaugegraded hard stone ballast with 3mm thick floating coat of neatcement finish on top of cover complete with all labour, materials and placing the same in proper position at required location of cable trench within the substation area. (csi no. 5.18) 7 concrete work with 40 mm gauge brick ballast obtained from breaking brick bats (brick bats supplied by the department free of cost) in proportion of 12:6:1 as in csi no. 5.01 includingcost of all labour,materials, t&p etc required for proper completion of work. (csi no. 5.20) 8 rcc work with cement, approved coarse sand(f.m. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p. . (csi no. 5.23) 9 rcc work with cement, approved coarse sand(f.m. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3inslab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p (csi no. 5.24) 10 first class brick work in 1:6 cement and coarse sand(f.m.1.8 to 2.5) mortar in foundation and plinth including supply of allmaterials, labour & t&p etc. required for proper completion of work. (csi no. 6.01) 11 first class brick work in 1:6 cement and coarse sand (f.m.1.8 to 2.5)mortar in super structure including supply of allmaterials, labour & t&p etc. required for proper completion of work but for walls of one brickthickness . (csi no. 6.01+6.08) 12 first class brick work in 1:4 cement and coarse sand (f.m.1.8 to 2.5)mortar in super structure including supply of allmaterials, labour & t&p etc. required for proper completion of work but for walls of 1/2 brick (115 mm)thickness . (csi no. 6.03+6.09) 13 brick work in foundation & plinth with old dismantledbricks (supplied by department free of cost) and coarse sand of f.m. 1.8 to 2.5mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,t&p etc complete. (csi no. 6.18) 14 removal of cement mortar from dismantled bricks and stacking in countable position at place as directed by the engineer in charge, including cost of all labour and t&p required for proper completion of work. (csi no. 6.22) 15 supply and filling brick bat in soak pit including all labour,material and t&p etc complete. (for 01 soak pit) (csi no. 6.23) 16 2.5 cm. thick damp proof course of cement concrete consisting of 1 part cement 1.5 parts approved coarse sand (f.m.1.8 to 2.5), and3 parts approved 12 mm. graded stone grit and also including liquidwater proofing material as approved by the engineer-incharge in the proportions specified by the manufacturer. (csi no. 7.02) 17 mild steel or iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (csi no. 9.01) 18 tmt/tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (steel shall be arranged by the contractor) (csi no. 9.03) 19 supply and fixing galvanised mosquito proof jali (16x24 gauge) withm.s. flat of 20 x 3 mm. size, on both sides screwed or welded to windowor door frame. (csi no. 9.18) 20 s/f welded wire mesh size 75x25mm and rectangular made out of 10 swg over m.s. angle frame with m.s. flat with nut and bolt welded as required including cost of drilling holes, bolts, nuts, washer wilding etc as required including cost of all material, labour and t&p etc. required for proper completion of work. exept cost of angle iron flat. (s.no. 9.22) 21 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and t&p etc for proper completion of work. (csi no. 11.07) 22 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and t&p etc for proper completion of work.(csi no. 11.09) 23 2 cm. thick cement plaster in dado or skirting in 1:2 consisting of onepart of cement and two parts of approved coarse sand laid inpanels finished with 3mm.floating coat of neat cement or cementand marble dust in ratio of 5:1 including supply of all materials, labour & t&p etc. required for proper completion of the work. (csi no.11.13) 24 s/mixing approved water proofing compound (cico,dr fixit etc) in cementmortar in plaster or concrete work in the proportion as recommended by the manufacturer. (csi no. 11.15) 25 providing (12x15) mm section groove in plasterincluding all material, labour andt&p etc. required for proper completion of the work. (csi no. 11.16) 26 3 mm thick floating coat of neat cement finish including supply of all materials,labour and t&p etc. required for proper completion of the work.( cement consumption 0.044 bag/sq.m.) (csi no. 11.20) 27 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and t&p etc, required for proper completion of the work. without base cc (csi no. 12.04) 28 supply and laying 8 mm thickglazed floor tiles of somany, johnson or equivalent make, , laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and t&p etc. required for proper completion of the work.(csi no. 12.11) 29 supply and laying 6 mm thickglazed tiles in skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete,including supplyof all materials, labour and t&p etc. completion required for proper completion of the work.(csi no. 12.12) 30 providing and fixing glass strips of 3.15 mm thickness & 40mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& t&p etc. required for proper completion of work. (csi no. 12.14) 31 supply of 80 mm thick i shaped mechanically compressed inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200x(160+120 mm) with minimum 5 mm thick toping of o.p.cement mixed with 25% marble powder. the compressive strength of concrete pavers blocks shall not be less than 30 mpa & 4.5 kg/no. including cost of all material, labour, t&p etc. required for proper completion of work as directed by engineer-in-charge but excluding g.s.t. which shall be paid extra as per rules. (csi no.12.23) 32 providing and laying18mm. thickkotastonein flooring or skirtingoverbasecementmortar 1:4 mix and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete and including supply of all materials labour and t&p etc required for proper completion of the work. (csi no. 12.17) 33 painting or varnishing new iron work in small areas or new woodwork with one coat of ready mixed priming paint and one coat ofapproved superior quality ready mix paint luxol or equivalentbrand or varnish including supply of all materials, labour and t&p etc. required for proper completion of the work. paint to be used should conform to the i.s. 103-1950.(csi no. 13.01) 34 as in item 13.01 above but every coat after the first coat. (csi no. 13.02) 35 as in item 13.01 above but for every coat on previously paintedold wood or iron work including its sand papering,rubbing andcleaning as required, for proper completion of work. (csi no. 13.03) 36 one priming coat and one coat oil bound distemper on new work includingsupply of all materials,labour and t&p etc. required for propercompletion of the work. (csi no. 13.08) 37 as in item 13.08 but for every coat after the first coat. (csi no. 13.09) 38 as in item 13.08 but for every coat on previously old oil bound distemper surface. (csi no. 13.10) 39 applying birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ici or equivalent brand for smoothening and levelling of the surface as per requirement and direction of engineer i/c including cost of all material, labour, t & p etc required for proper completion of work. (csi no. 13.20) 40 applying birla putty or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ici or equivalent brand for smoothining and leveling of the surface as per requirement and direction of e/i including cost of all material , labour and t&p required for proper completion of work.(csi no.13.21) 41 dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theengineer-in-charge within a distance of 60 metres.(csi no. 15.01) 42 dismantling reinforced cement concrete or reinforced brick work,including stacking of dismantled materials as directed by theengineer-incharge within a distance of 60 metres. (csi no. 15.03) 43 dismantling cement concrete or brick or granolithic floorsincluding base concrete and including stacking of dismantledmaterials as directed by the engineer in-charge within a distanceof 60 metres. (csi no. 15.05) 44 dismantaling doors and windowschowkhatsincluding stacking of materials as directed by engg-in-charge within a distance of 60 meters. (csi no. 15.10) 45 dismantling existing plaster including disposal of refuse asdirected by the engineer-i/c within a distance of 60 m. (csi no. 15.11) 46 renewing panes of 4.8 to 5.7 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&p etc. required for proper completion of the work.(a) glass of 5 mm thick. (csi no. 20.04) (i)same as above itembut 4 mm thick panes. 47 s/laying chicken mesh of (20 mm.)hexagonal heavy quality over roofs of joints of roof as per direction of the engineer - in - charge.(csi no. 20.21) 48 drilling bore for 150mm dia to be completed as per direction of engineer i/c .(csi no. 19.04)h(i) from 0 m bgl to 90 m bgl. 49 providing110mm dia plain pvc casing pipes (aroma /supreme) (pressure10 kg./ sqcm.) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and t&p required for assembly making and proper completion of work. (csi no. 19.08) 50 providing110mm dia slotted pvc casing pipes (aroma /supreme) (pressure10 kg./ sqcm.) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and t&p required for assembly making and proper completion of work. (csi no. 19.10) 51 supply and fixing of pvc top plug of heavy qualityincluding all labour material & t&p.(csi no. 19.19) a 110 mm dia. 52 supply and fixing c.i. non-return valveisi marked and approved make with nuts, bolts, packing etc completeincluding all labour material & t&p.(csi no. 19.23) e 32mm dia. 53 supply and fixing support clamps for column pipesmade out of ms flats, pairs of bolt-nuts etc complete with all material, labour, t&p.(csi no. 19.24) e 32 mm dia. 54 supply & installation of electrical control panel of l&t / havells or equivalent make for submersible pump / pumpset containing contractor relay condenser.(csi no. 19.31) a) for 1 h.p pump set single phase 55 supply & installation ofsubmersible pump of k.s.b/ calama. or eqt. make including cost of labour, t&p and material required for completion of work.(csi no. 19.32) a) 1 hp outlet 32mm dia. or more, head 78/30, discharge 1100/2800 lph 56 p/f of 32mm dia upvc pipe of approved quality (isi marked) for tubewell column assembly in 3m lowering with socket (nsi) 57 supply and fixing of submersible cable havelsor equivalent make, for submersible pump complete in all respect.(csi no. 19.33) b) 2.5 mm2 for pumpabove 1 hp and up to 3 hp. 58 supply & fixing of steel wire rope forsubmersible pump including cost of labour, t&p and material required for completion of work.(csi no. 19.34) 59 providing and fixing 15 mm dia jindal, jtc, isi marked g.i. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes external gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. (csi no. 26.02)a 60 same as above but for 25 mm dia.(csi no. 26.02)c 61 same as above but for 32 mm dia.(csi no. 26.02)d 62 providing and fixing full way 15mm dia g.m. gate valvewith wheel, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work.(csi no. 26.04)a 63 gm full way gate valve 20 mm dia.(csi no. 26.04)b 64 gm full way gate valve 25 mm dia.(csi no. 26.04)c 65 providing and fixing pvc connection pipe, 300x15 with 2 brass units isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work.(csi no. 26.09)a 66 p/f gi unions nominal bore 15 mm, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. (csi no. 26.10)a 67 gi unions 20 mm nominal bore (csi no. 26.10)b 68 gi unions 25 mm nominal bore (csi no. 26.10)c 69 supply and fixing of syntex or equivalent make water storage tank including all materials, labours, t&p etc required for proper completion of work. (csi no. 26.12) 70 p/fbrass bib cock, 15 mm dia (400 gsm) isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. (csi no. 26.13)a 71 brass bib cock 15 mm dia. 200 gms( l & k and equi.) (csi no. 26.13)b 72 providing and fixing of 110 mm dia pvc pipe 6 kg/ sq.cm forwith special such as tee, bend, socket, elbow etc including supply of all labour,material,t & p etc complete required for proper completion of work. (csi no. 26.17) 73 providing and fixing 15 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. (csi no. 26.19) 74 providing and fixing 20 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. (csi no. 26.20) 75 providing and fixing 25 mm dia isi approved cpvcpipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. (csi no. 26.21) 76 providing and fixing first quality white glazed orissa pattern w.c.pan hindware, cera make. size 580 mm.(hindware,cera make) with out p trapincluding supply of all materials,labour and t&p etc.complete. (csi no. 27.01) 77 providing and fixing flat back 465 mm.x 355 mm x 265 mm. size lipped front urinal basin of white glazed earthern ware first quality (hindware, neycer make) i.s.i. marked including supply of all materials,labour and t&p etc. required for proper completion of the work.(csi no. 27.05) 78 providing and fixing 550x400 mm wash hand basin of white glazed earthern ware first quality i.s.i. marked ((hindware,neycer / cera make) including supply of all materials, labour and t&p etc. required for proper completion of the work.(csi no. 27.08) 79 providing and fixing 10 litres low level pvc flushing cistern, complete with all fittings including supply of all materials, labour and t&p etc. required for proper completion of the work. (csi no. 27.12) 80 providing and fixing in position 32 mm. dia p.v.c.waste pipe for wash basin. including supply of all materials,labour and t&p etc.required for proper completion of the work. (csi no. 27.14) 81 supply and fixing of 3 blade ceiling fan 1200 mm of havells or equivalent including all material, t&p etc required for proper completion of work as approved by engineer in charge.(csi no. 28.39) 82 finishing walls with water proof exterior emulsion paint oface (asian) or equivalent brand on already well prepared new wall surfaces with one coat of primer (ici) followed by two coats of ace exterior empulsion paint to give an even shade including thorough washing with water including as per direction of e/i direction of including cost of all materials, labour, t&p etc requried for proper completion of the work (nsi) 83 finishing walls with water proof exterior emulsion paint oface (asian) or equivalent brand on old surfaces to give an even shade including thorough washing with water including as per direction of e/i direction of including cost of all materials, labour, t&p etc requried for proper completion of the work (nsi) 84 supply & fixing of zinc/aluminium alloy coated high tensile steel sheet of 0.50mm thickness have minimum yield strength of 550 mpa with a profile width of 1072mm & efective width of 1015mm of durashine tata blue scope roof & wall sheets as per approved shade & sample by engineering-in-charge in position on trusses including supply of maerials, labour t&p etc. (nsi) 85 wiring point for light with 1.5 sq. mm.frlsh pvcinsulated multistrand single core copper conductor cable in pvc conduit pipe on surface, complete with 14 swg copper earth continuity wire,gp box ,piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect, as directed . 2018 pwd 121c 86 wiring point for fan /fresh air fan(light duty exhaust fan) with 1.5 sq.mm.frlsh pvc insulated multistrand single core copper conductor cable in pvc conduit pipe on surface complete with 14 swg copper earth continuity wire, piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc, complete in all respect 2018 pwd 123c 87 wiring point for plug with 1.5 sq. mm.frlsh pvc insulated multistrand single core copper conductor cable in pvc conduit pipe on surface,complete with 14 swg copper earth continuity wire , gp box and piano type switch and socket etc. complete in all respect.2018 pwd 124c 88 supply and wiring of submains with 2 nos. 4 sq mm & with 1 no earth wire of 2.5 sq mm frlsh pvc insulated 1100 v grade single core multistrand copper conductor cable in existing pvc conduit complete, including supply of all material, labour and t & p etc. required for proper completion of the work as directed by engineer in charge 2018 pwd 291 a 89 s&f of 6 amp to 32 amp. spmcb (10 ka) c curve 1002 pwd cat b