running contract for business plan works under edd-aonla-1 work of safe carriage of the following material from cb ganj store center to work site under the jurisdiction of edd-aonla. approx. distance upto 10-80 km. including safe loading and unloading. 2 pcc pole 8.5 meter long. 3 stp 11 mtr long 4 line material i.e., cross arm / conductor / pin insulater / stay / earthing rod / disc fitting / disc insulators / 11 kv xlpe cable etc 5 11 / 0.4 kv 1 phase 10 / 16 kva t / f 6 11 / 0.4 kv 3 phase 25 kva t / f 7 11 / 0.4 kv 3 phase 63 kva t / f 8 11 / 0.4 kv 3 phase 100 kva t / f 9 11 / 0.4 kv 3 phase 250 / 400 kva t / f 10 erection of new pcc single / double pole in h.t / l.t lines including fitting of all accessories as per resspo norms 11 pcc pole 8.5 mtr long single pole 12 pcc pole 8.5 mtr long double pole 13 st pole 11 mtr long single pole. 14 st pole 11 mtr long double pole. 15 grouting with 1:4:8 mixture in size ( 450x450x1500mm. ) including cost of cement / bb & sand required as per resspo norms 16 pcc pole 8.5 mtr long single pole 17 pcc pole 8.5 mtr long double pole 18 st pole 11 mtr long single pole. 19 st pole 11 mtr long double pole. 20 the work of driving the earthing electrode and making connections with 6 s.w.g. gi wire as per resspo norms 21 dismentaling of old and damaged conducor complete in all respect 22 dismentaling of existing distribution transformer for inceasing capacity complete in all respect 23 11 / 0.4 kv 3 phase 25 kva t / f 24 11 / 0.4 kv 3 phase 63 kva t / f 25 11 / 0.4 kv 3 phase 100 kva t / f 26 resagging of loose conductor / abc ( single wire ) as per norms complete in all respect 27 laying, stringing & sagging of following conductor complete in all respect 28 acsr weasal conductor 29 acsr rabbit conductor 30 acsr dog conductor 31 3 phase arial bunched conductor 32 1 phase arial bunched conductor 33 under ground laying of following cable in single circuit on river sand to double pole situated at both sides of road complete in all respect. minimum depth should be 0.75 mtr and cable should be covered by bricks from three sides. alongwith filling of 04 nos cable jointing kits 34 11 kv xlpe cable size 3x70 sqmm 35 11 kv xlpe cable size 3x120 sqmm 36 11 kv xlpe cable size 3x185 sqmm 37 the work of digging of pits, erection of stay clamp, insulator etc. 38 grouting of stays, 1:4:8 cc ratio ( 600x600x300mm. ) as per respo norms. 39 construction of t / f plinth 1.5x1.5x2 m3 for mounting 250 / 400 kva t / f including foundation work ( below ground 0.5 m ) , brick work, rcc slab of 4” thickness and plastering in 1:6 ratio with 02 nos channel pieces of 1.5 mtr long of size 100x50x6 mm compete in all respect 40 cage fencing of 250 / 400 kva plinth mounted transformer in town areas to avoid electrical human / cattle accidents by fabrication of cage ( 1 inch sq wiremesh ) made of 10 no gauge in suitable size angle iron frame of size 7.5 ( l ) x5 ( w ) x8’ ( h ) by strenghtening of wire mesh 20x3 mm m.s. flat haorizentally as well as vertically, grouting the panel with 1:2:4 cement / coorse send / brick ballast. the frame should be bolted on angles at the four corners so that frame may be un-bolted / bolted at the time of replacement of the transformer. provision of 1 gate should be there for maintenance of the transformer. painting ( 1 coat of red oxide + 2 coat of bus green enamel paint ) . the wire mesh should be earthed with 50x6 mm ms earthing strip with existing earthing of transformer body. all men, material and t&p provided by the contractor to complete the fabrication, transportation and installation. 41 mounting of following capacity transformers as per norms complete in all respect - 42 10 / 16 kva t / f 43 25 kva t / f 44 63 kva t / f 45 100 kva t / f 46 250 / 400 kva t / f 47 fixing of distribution box complete in all respect 48 guarding at road crossing complete in all respect 49 straightening of tilted pole complete in all respect 50 replacement of wooden x-arm complete in all respect 51 replacement of damaged 11 kv pin / disc insulator complete in all respect 52 replacement of damaged 33 kv pin / disc insulator complete in all respect 53 safe back carriage of following item ( if any ) from work site to c.b. ganj store bareilly approx distance upto 10-80 km including loading & unloading. 54 scrap ( line material ) 55 11 / 0.4 kv 3 phase 25 kva t / f 56 11 / 0.4 kv 3 phase 63 kva t / f 57 11 / 0.4 kv 3 phase 100 kva t / f 58 tree cutting