deposit-department of indian system of medicine-plan fund 2022-23-repair and maintenance works of ayurveda dispensary. irinavu. kannur-general civil work- appendix a 2 15.12.1:dismantling doors, windows and clerestory windows ( steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below 3 15.10.2:dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually / by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge:in cement mortar 4 13.1.2:12 mm cement plaster of mix:1:6 ( 1 cement : 6 fine sand ) . 5 9.48.1:providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete.fixed to steel windows by welding 6 14.43:removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 7 13.46.1:finishing walls with acrylic smooth exterior paint of required shade:new work ( two or more coat applied @ 1.67 ltr / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm ) 8 21.1.1.2:providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is : 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminnium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. ( glazing, paneling and dash fasteners to be paid for separately ) :for fixed portionpowder coated aluminium ( minimum thickness of powder coating 50 micron ) 9 21.1.2.2:for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required ( fittings shall be paid for separately ) powder coated aluminium ( minimum thickness of powder coating 50 micron ) 10 21.2.2:providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to is : 12823 grade i type ii, in panelling fixed in aluminum doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer - in- charge.pre- laminated particle board with decorative lamination on both sides 11 9.95.6:providing and fixing isi marked aluminium butt hinges anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete:75x63x4 mm 12 21.3.2:providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer - in -charge. ( cost of aluminium snap beading shall be paid in basic item ) :with float glass panes of 5.50 mm thickness 13 9.83:providing and fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ) , with necessary accessories and screws etc. complete. 14 9.96.1:providing and fixing aluminium sliding door bolts, isi marked anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) , transparent or dyed to required colour or shade, with nuts and screws etc. complete:300x16 mm 15 9.100.3:providing and fixing aluminium handles, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete:75 mm 16 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size ) 17 2.8.1:earth work in excavation by mechanical means ( hydraulic excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan ) , including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil 18 16.68:providing and laying 60 mm thick factory made cement concrete interlocking paver block of m - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer-in-charge. 19 9.157.2:providing and fixing pre-laminated medium density fibre board is:14587:1998 marked, with one side decorative lamination other side balancing lamination grade-i ( exterior grade ) in shelves with screws and fittings wherever required, edges to be sealed with pvc edge bending tape 2.00 mm thick of approved brand ( fittings to be paid separately ) .pre-laminated with decorative lamination one side and other side balancing lamination exterior grade-i mdf board 25mm thick confirming to is:14587. 20 21.12.1:providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with s.s. screws etc. complete as per direction of engineer -in-charge.anodized ( ac 15 ) aluminium tubular handle bar 21 14.54.1:painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:one or more coats on old work 22 50.10.1:steel work in built up g i tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete