labour / with material work at gaushala salliya shahjahanpur - 1 full vertical tender and labour work 1.01 excavation in foundations in ordinary soil ( loam clay or sand ) including lift upto 1.5 m ( 5 fts. ) and lead upto 30 mt. ( 100 fts. ) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-incharges upto a distance of 30mt. ( 100 fts ) from the foundation trenches. 1.02 carted earth filling 1.03 sand filling in plinth including supply of sand of neccessary quantity 1.04 labour work for laying of cement concrete 1:4:8 including all t&p but excluding any supply of material 1.05 labour work m-150 brick work in 1:6 ( one cement and six coarse sand sand of 2.25 fineness modulus ) mortar in foundation & plinth including supply of all materials, labour and t & p etc required for proper completion of the work. 1.06 laying damp-proof course 40mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand ( zone-iii ) : 4 graded stone aggregate n12.5mm nominal size ) 1.07 providing & applying a coat of residual petroleum bitumen of grade of vg-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 1.08 labour work m-150 in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1.6 brick thick. ( 1:6 cement & coarse sand ) 1.09 same as item no. 8 but in 1:4 cement and coarse sand mortar for wall thickness 12cms & below brickwork 1.1 labour work for r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than m-200. 1.11 r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 ( m-20 ) in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 b.w.g.g.i. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. binding wire cost being inluded in the item. m-20 1.12 r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 ( m-20 ) in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 b.w.g.g.i. binding wire 1.13 r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 ( m-20 ) in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 b.w.g.g.i. binding wire 1.14 as in item above but for r.c.c. work in footting / raft 1.15 providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including isi marked stainless steel butt hinges nwith necessary screws 1.16 mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods, gratings etc. ( when not included in an over all rates ) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. 1.17 door / windows grill. 1.18 z-section windows ( openable ) 1.19 angle iron door chaukhat 40*40*5 1.2 p / f mild steel or iron in plain work such as reinforced concrete or reinforced, brick work ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks. 1.21 15mm plaster on rough side of single brick wall 1.22 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and / or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. ( 1 ) 1 cement : 6 fine sand. 1.23 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. ( 1 ) 1 cement : 6 fine sand 1.24 providing and laying brick coba 1.25 cement concrete flooring 1:2:4 finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. compelete 40mm thick with 20mm nominal size stone grit 1.26 18mm thick cemnet plaster for skirting upto 30cm height with cement plaster 1.27 providing and laying ceramic floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) , of 1st quality conforming to is : 15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand ) , including pointing the joints with white cement and matching pigments etc., complete. 1.28 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 1.29 cement concrete flooring 1:2:4 1.3 painting two coat over priming coat ( but including cost of priming coat ) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3, hi-gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. 1.31 same as above but wodden painting 1.32 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade. new work ( two or more coats applied @ 1.43 ltr / 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm ) . 1.33 distempering ( two coat ) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as berger, j&n, shalimar, asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. 1.34 distempering ( two coat ) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as berger, j&n, shalimar, asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. ceiling 1.35 providing and fixing glass pane with pitty and glazing clips in steel door windows etc. 1.36 making drain along the apron 1.37 forming groove of uniform size from 12x12mm and upto 25x15mm in toplayer of washed stone grit plastered surface as per approved pattern 1.38 providing glass strips, joints skiirting dado 1.39 providing isi marked oxidised m.s. sliding door bolt with nuts and screw etc. 1.4 providing and fixing marked oxidised ms tower bolt 200mmx10mm 1.41 providing and fixing isi marked oxidised ms handle conforming to is:4992 with neccessary screws etc 1.42 providing and fixing bright finished door stooper 1.43 shuttering of r.c.c. work for beam, slab and column etc. 1.44 note:quantity may vary as per site requirement specification will be followed as per uppwd, dsr, engg-in-charge. bidder registered in e-tender and e-procurement both are only applicable for bidding.any problem in bidding, item decription rate or any issue regarding above mentioned can be cleared on phone, office, email-id