tender for annual plan-kolazhy gp proj no.214/2025-26 mla road bilane tarring in ward 14-2025-26-general civil work.; 1 3.15.2:compacting original ground (ii) compacting original ground supporting subgrade loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of tables 300.1 and 300.2 for subgrade construction as per technical specification clause 303.5.2. 2 4.11.2:granular sub-base/base/surface course with local materials (table 400.13) by mix in place method normal. construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per clause 401.4 as per technical specification clause 408. (ii) using gravel mix soil. 3 4.9:wet mix macadamproviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406.by mechanical means with 1 km lead 4 75.5.1.1pb:prime coat - low porosity - with packed bitumen ratesproviding and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per technical specification clause 502 5 75.5.2.3pb:tack coat - with packed bitumen ratesproviding and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503. 6 75.5.11.1.a.2pb:mix seal surfacing - manual means - type a - bitumen s-65 - packed bitumen ratesproviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (type-a) or 13.2 mm to 0.9 mm (type-b) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kn static roller and finishing to required level and grades as per technical specification clause 509by manual meanstype a(ii) bitumen (s-65) 7 3.14:construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1. 8 3.5.1:excavation in cutting in soil by manual means with lead upto 50 m
excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3 9 11.4.4:providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications clause 802, 803, 1202 & 1203
iv. r.c.c grade m 20 10 11.8:supplying, fitting and placingtmt bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202 11 od250871/2025-2026:10.23 item shifted to sub head 14 as item 14.73 10.24 item shifted to sub head 14 as item 14.73 10.25 steel work welded in built up sections / framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required 10.25.2 in gratings , frames, guard bar , ladder, railings, brackets, gates and similar works