tender for construction of mecanical sub division office r m in z.p. primices at latur tq. latur dist. latur for year 2025-26 - excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means 2 excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means 3 providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete.with fine aggregate ( crushed sand vsi grade) 4 providing and laying in situ/ready mixcement concretem-20of trap / granite /quartzite/ gneissmetal for r.c.c. workin foundations like raft, strip foundations, grillage andfootings of r.c.c. columns and steel stanchionsetc. including bailing out water, formwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate ( crushed sand vsi grade ) 5 providing and laying cast in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate ( crushed sand vsi grade ) 6 providing and laying cast in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate ( crushed sand vsi grade ) 7 providing and laying cast in situ/ready mix cement concrete m-20 of trap/ granite / quartzite/ gneiss metal for r.c.c. slabs and landingsas per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate ( crushed sand vsi grade ) 8 providing and laying cast in situ/ready mix cement concrete m-20 of trap/ granite/ quartzite/ gneiss metal for r.c.c. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate ( crushed sand vsi grade ) 9 providing and fixing in position tmt - fe - 500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 10 providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. complete. 11 filling in plinth and floors with contractorsmaterial/brought from outside and approved by engineer inchargein layers of 15cm. to 20cm.including watering and compaction etc. complete. 12 providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. complete 13 providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm x 1.6 mm placedat every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. 14 providing and laying telephone black / amba white / cadburybrown / ruby red / ocean brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. on c.m. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing,etc. complete. 15 providing and fixing 30mm thicksolid panel pvc internal door shutter consisting of frame made out of m.s. tubes of 19 gauge thickness and size of 40mm x 20mm for stiles ,top, lock and bottom rails. m.s. frame shall have a coat of steel primers of approved make and manufacture. m.s. frame shall be covered with 5mm thick heat moldedpvc channel of size 30 x 100mm forming stiles, and 5mm thick, 125mm wide pvc sheets for top rail, lock rail and bottom rail on either side, and 15mm (5mm x 3) thick, 20mm wide cross pvc sheet as gap insert for top rail and bottom rail. paneling of 10 mm thick prelam pvc sheet to be fitted in the m.s. frame welded / sealed to the stiles and rails with 30mm wide x 5mm thick pvc sheet beading on either side, and joined together with solvent cement adhesive etc. an additional 5mm thick pvc strip of 20mm width is to be stuck on the interior side of the c channel using pvc solvent cement adhesive. including stainless steel fixtures and fastening complete as per direction of engineer in charge, manufacturersspecification and drawing. 16 providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete. 17 providing and fixing in position (as per 1868 / 1982) aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/rmt.. top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/rmt. the shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/rmt. inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/rmt. as per detailed drawings and as directed by engineer-in-charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. with powder coating with box 18 providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of m.s. flats of size 18 x 5 mm t or e section for runner of minimum 40 x 6 mm size for flange, m.s. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade f.g. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer & oil painting etc. complete. (i.s. 10521-1983). 19 providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 20 providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. 21 providing internal cement plaster 20mm thick in single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete 22 providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make, etc complete. 23 providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness andconfirming to is. 15622-2006( groupbla) of approved make, shade and pattern for flooring in required position laid on a bed of1:4cementmortarincludingneat cementfloat,fillingjoints,curingandclearing etc. complete. 24 providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to i.s.15622/2006 (group d ii-a) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. 25 providing and laying ceramic tiles ofhaving size 30 cm. x 30 cm. and confirming to corresponding i.s. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 26 providing and fixing coloured glazed earthenware full stall type urinal with p.v.c. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap brackets for fixing the cistern 32mm dia. p.v.c. flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap soil pipe connection up to the outside face of the wall. 27 providing and applying priming coat on concrete/ masonary/ asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. 28 providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. 29 providing and applying two coats of lead/zinc base oil paint/bituminous paint of approved colour and shade to new wood work and fiber boards including preparing the surface, knotting, scaffolding if necessary, excluding primer coat etc. complete. 30 providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. 31 royalty charges for sand 32 royalty charges for other minerals 33 laboratory testing chargeswater absorption , compressive strength, efflorescence (set of 5 bricks) 34 concrete compressive strength of c.c.cube (set of 3 cubes) 35 add for gst 18% 36 add for labour insurance 1%