tender for provision of lighting arrangement with led street lights in ward no -236 kardampuri under shahdara (north) zone.; 1 led street light fixture, powder coated pressure die cast aluminum body (system lumen efficacy ≥120 <135 lm/watt)supplying, installation, testing & commissioning of street light ledfixture powder coated pressure die cast aluminum body with driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-4-5, driverefficiency >85%,thd < 10% as per iec 61000-3-2 , p. f.≥0.95, ip66,ik-10, cri >80, under voltage and over voltage protection, emiemc as per cispr 15 , lenses for beam angle as per iesna type i/ii/iii asper the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin), sdcm(standard deviation color matching) <5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c connections with 1.5 sq mm frls, pvc insulatedcopper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy ≥120 <135 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall beas approved by engineer-in-charge as per requirement. (thermalmanagemheat sink of aluminum housing such that led junction temperature shall not rise above 90°c).72 watt 2 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. (a)upto 35 sq. mm 3 p/fhot press sheet mouldedcompound (smc) fire retardant (temp. resistance up to 200 c), ip 55 weather proof polebox of innerdimension 200x160x98mm (ns) complete with suitable arrangement for fixing of 2 nosof 6 to 32 amp single pole mcb & 63 amp. doublepole isolator (mcb/isolator excluded) withneutral link duly shorting on din channel with2 nos of ms clamps with ss back plateofsuitable size with danger monogram property printed on the coveretc asreqd. asreqd. 4 supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required.3 x 1.5 sq. mm 5 supplying and fixing following rating, double pole, 240 volts, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required.63 amps 6 supply of xlpe insulated pvc sheathed al conductor armoured cable 1.1 kv grade conforming to is-7098 of following size: (a)2x6 sqmm 7 supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*6 sqmm 8 supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd 9 providing and fixing of stainless steel name plate of size 6×8 sq inch made of 20 gauge sheet including engraved name of area representative duly painted along with ss clamp nut bolt etc as required 10 supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required.(a)single pole