tender for material supply fy2026-27 gp bhalni ps bagoda-1 gravel / kankar / coarse aggregate 2 mud mortar / mud paste 3 slaked lime (from kiln) for masonry work 4. cement 4.1 ppc (portland pozzolana cement) 4.2 white cement 5. fine aggregate 5.1 sand / grit 5.2 local grit / gravel 5.3 fly ash 5.4 surkhi (pulverized brick dust) 5.5 stone dust (for masonry work) 6 stone / brick aggregate (for works other than roads) 6.1 stone aggregate, 40 mm size (hand-broken) (void deduction: 1/11) 6.2 stone aggregate, 40 mm size (crusher-broken) (void deduction: 1/11) 6.3 stone aggregate, 20 mm size (crusher-broken) 6.4 stone aggregate, 12/10/6 mm size (crusher-broken) 6.5 brick aggregate 7 materials for road works (including 5 km lead) 7.1 stone aggregate, 63-40 mm size (crusher-broken) (void deduction: 1/11) 7.2 stone aggregate, 63-40 mm size (hand-broken) (void deduction: 1/11) 7.3 stone aggregate, 90-45 mm size (hand-broken) (void deduction: 1/11) 7.4 quarry rubble (void deduction: 1/6) 7.5 gravel (void deduction: 1/6) 7.6 kankar (void deduction: 1/6) 7.7 binding material (pi 4-6) (void deduction: 1/6) 225nlx7.50 cm [first] class 2 [second] class (cr) special (15 cm height, for specific work) 04 rough-dressed stone (23 cm height, for masonry/rough work) jodhpur-type stone slabs/arches/cut pieces (length: 2-3 ft; width: 10-12 inches; thickness: 25-35 mm) 10 flaky stone material (3-4 thick; length and width: 1-2 ft) sandstone (dpc, sill, coping, lintel, shelf, almirah, etc.) 10.1 up to 25 mm thickness 10.2 up to 25-40 mm thickness 10.3 up to 40-50 mm thickness 10.4 up to 50-75 mm thickness 10.5 up to 75-100 mm thickness 10.6 up to 100-150 mm thickness 11 11.1 flooring/slab paving stone slabs 11.2 flooring slabs: up to 35 mm thick, min. 3 sq. ft. or more area 11.3 slabs for paving/roofing: 60-75 mm thick, min. 3 sq. ft. or more area 11.3.1 unpolished, rough kota stone... up to 900 sq. cm. 11.3.2 from 901 to 2300 sq. cm. 11.3.3 greater than 2300 sq. cm. 11.4 polished kota stone (polished on one side) 11.4.1 up to 900 sq. cm. 11.4.2 from 901 to 2300 sq. cm. 11.4.3 greater than 2300 sq. cm. more 11.5 marble stone (makrana adanga, 20 mm thick) 11.5.1 up to 900 sq. cm 11.5.2 from 901 to 2300 sq. cm 11.5.3 exceeding 2300 sq. cm. 11.6 marble chips 11.7 marble powder 11.8 marble stone (rajnagar ii quality / local, 20 mm thick) 11.8.1 up to 900 sq. cm. 11.8.2 from 901 to 2300 sq. cm. 11.8.3 exceeding 2300 sq. cm. 12 stone door frames 12.1 single rebate, size 100 x 75 mm 12.2 double rebate, size 125 x 75 mm 13 stone slabs 13.1 up to 1.5 m length, minimum 40 mm thick 13.2 1.5 m to 2.40 m length, minimum 50 mm thick 13.3 2.4 m to 3.0 m length, minimum 65 mm thick 13.4 above 3.0 m length, minimum 75 mm thick 14 precast tiles/blocks 14. glazed, size 30 x 45 cm 14.2 mosaic size – 40 mm thick 14.3 vitrified size – 60x60 cm 14.4 checkered tiles size – 30x30 cm 15 interlock tiles/bricks/blocks for round work 15.1 cement interlocking block, m-30 grade, 60 mm thick 15.2 cement interlocking block, m-30 grade, 80 mm thick 15.3 cement interlocking block, m-30 grade, 100 mm thick 16 local timber (including fittings) (for doors, windows, and furniture) 16.1 mango wood 16.2 mahua wood 16.3 others (teak wood) 16.4 factory-made doors (30 mm thick, solid core, single leaf) 17 structural steel 17.1 iron (tor steel fe 415/500 for reinforcement) 17.2 binding wire (18 gauge) 17.3 iron girders 17.4 angle iron / square bars / flat strips 17.5 barbed wire (size: 12 gauge wire and 12 gauge strand / 12 gauge wire and 14 gauge strand / 14 gauge wire and 14 gauge strand) 18 18.1 wire mesh 18.2 iron wire mesh (24 gauge, 14 mesh) 19 cement concrete jali (trellis) – akash patal pattern, 40 mm thick glass 19.1 3 mm thick glass 19.2 5 mm thick glass thick glass 20 paints & coatings 20.1 enamel paint 20.2 distemper (water-bound) 20.3 lime wash (aras / kali) 20.4 primer (for iron/wood) 20.5 exterior paint 20.6 plastic paint 20.7 cement paint 21 petroleum products 21.1 diesel (hsd) 21.2 lubricating oil 21.3 bitumen shalitex board (25 mm thick) 22 plain sheets 22.1 g.i. sheet, 22 gauge (0.80 mm) 22.2 g.i. sheet, 24 gauge (0.63 mm) 22.3 m.s. sheet, 22 gauge (0.80 mm) 22.4 m.s. sheet, 24 gauge (0.63 mm) 23 corrugated sheets 23.1 g.i. sheet (thickness in mm) 23.2 g.i. sheet, 22 gauge (0.80 mm) 23.3 everest cement sheet, 6 mm (2.5/2.75 x 1 m) 24 other sheets 24.1 pvc sheet, 1 mm thick (colored/plain) 24.2 green/yellow literoof expo sheet (183 x 90) 25 pipes 28.1 g.i. pipe, 15 mm diameter (class b) 25.2 g.i. 20 mm diameter (class b) 25.3 g.i. 25 mm diameter (class b) 25.4 a.c. 75 mm diameter 25.5 a.c. 100 mm diameter 25.6 pvc 90 mm diameter (with ring) 25.7 25.8 pvc 110 mm diameter (with ring) pvc 140 mm diameter (with ring) 25.9 pvc 110 mm (2.5 kg/sq. cm) with coupler 26 sanitary 26.1 indian w.c. 26.2 orissa w.c. 26.3 european w.c. 26.4 foot rest (foot plate) 26.5 vitreous china lip urinal 430 x 350 x 300 mm, complete with coupling, bracket, and pvc waste pipe 26.6 wash basin 450 x 300 mm, complete with coupling, bracket, and pvc waste pipe 26.7 stone ware (s.w.) pipe, 100 mm diameter, 0.6 m length 26.8 c.p. pillar cock (dia 15 mm) (is marked) 26.9 c.p. bib cock (dia 15 mm) (is marked) 26.10 c.p. grating, 125 mm diameter 27 r.c.c. np3 rcc pipe with collar 27.1 1200 mm diameter 27.2 1000 mm diameter 27.3 750 mm diameter 27.4 600 mm diameter 27.5 450 mm diameter 27.6 300 mm diameter 28 fr pvc insulated copper conductor single core cable (isi marked) 28.1 1.50 sq. mm 28.2 2.50 sq. mm 28.3 0.50 sq. mm 28.4 1.00 sq. mm 28.5 4.00 sq. mm 28.6 6.00 sq. mm 29 13/0.20 mm twin core pvc sheathed, stranded flexible copper cable 30 steel conduit (isi marked) 30.1 20 mm diameter 30.2 25 mm diameter 31 pvc conduit (isi marked) 31.1 25 mm diameter 31.2 20 mm diameter 32 junction box 32.1 20 mm, two-way 32.2 20 mm, one-way 32.3 25 mm, two-way 32.4 20 mm, one-way (pvc) 33 modular gi box 34.1 for 3 modules 34.2 for 2 modules a modular base and cover plate etc