tender for p&f supply, installation, testing and commissioning work of led lights with phase wire , providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy =125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @=300 v ac and auto resetting safety , power factor 0.95 driver efficiency 85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri 70 and cct 5700k +355k. surge protection shall be min ≥ 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure a attached with this bsr . led street light fixture with minimum lumen output 3700 lm , led street light fixture with minimum lumen output 5600 lm , providing & fixing of street light bracket made out from following size of b class , medium class g.i. pipe confirming to is : 1239 p - 1 ( 2004 ) with heavy duty pole clamp, saddles suitable fastners etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure a attached with this bsr . 40 mm dia. , supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure a attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated) , providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed armoured copper cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with electrolytic grade copper made of copper rods confirming to is 613-1964, of purity 99.7 %, round / flat strip armouring, inner / outer sheath confirming to is:5831 in existing reinforced cement concrete / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray(with cable tie) including testing etc. as required of following size. oem must have its own in house nabl accrediated laboratory for testing procedure as per is:10810 for additional technical parameters of product / work refer annexure a attached with this bsr. 2.5 sq. mm 2 core , supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr , plate earthing as per is:3043 with copper earth plate of purity 95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. g.i. b class watering pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and heavy duty weather proof poly-propylene earth pit chamber with lockable jam free lid suitable for safe working load 5000 kg or more of size top dia. 225 to 260 mm, bottom dia 300 to 350 mm. and height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in-charge during site visit and ensure to enter in measurment book. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure a attached with this bsr . , main cubical panel / street light control panel providing and fixing testing & commissioning of kiosk type weather proof out door main cubical panel size 750 mm x 1250 mm x 500 mm (app.) made out of 14 gauge ms sheet front and back both side openable duly hinged door with locking arrangement by providing both side held draft and all required hard wares. the cubical should be dust and vermin proof followed by coat of zimpholite primer and finally two coats of enamal gray paint. the cubical should be mounted with hard ware on angle iron frame size 50 x 50 x 6 mm and 1500 legs duly painted framed be grouted 750 mm below ground level with cement concrete 1:3:6 in 1000 x 500 x 600 mm and providing brick masonary along angle iron frame above g.l. (as per ruidp 2017)