tender for general-116/26 maintenance of choondaserry sub centre-bhmward 6-general civil work - toilet construction 2 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil 3 od250302/2025-2026:dry rubble masonry _ dry rubble without concrete levelling course masonry with good quality blasted rubble(with out bond stone) including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of departmental officers at site(modified from approved data(1.2) of ce,pwd,tvm as per order no.go (rt) no.6544/2021/fin dtd 6-10-2021) 4 od250300/2025-2026:random rubble masonry with hard stone in foundationup to plinth level with:cement mortar 1:6 (1 cement : 6 coarse sand) 5 5.1.2:providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) 6 50.6.2.2:solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to is 2185 part i of 1979 for super structure up to floor two level with thickness 15cm in : cm 1:6 ( 1 cement : 6 coarse sand) etc complete 7 5.3:reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15°landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (zone iii)derived from natural sources: 3 graded stone aggregate 20 mm nominal sizederived from natural sources). 8 5.9.5:centering and shuttering including strutting, etc. and removal of form for:lintels, beams, plinth beams, girders bressumers and cantilevers 9 5.9.3:centering and shuttering including strutting, etc. and removal of form for:suspended floors, roofs, landings, balconies and access platform 10 5.22.6:steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more 11 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 12 13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) 13 od250301/2025-2026:providing and fixing i st quality ceramic glazed wall tiles conforming to is : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer -in-charge, in skirting, risers of steps and dados, with cement based high polymer modified quick-set tile adhesive (water based) confirming to is :15477,in average 3mm thickness. (modified data from 11.36) 14 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 15 11.38:providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of ist quality conforming to is : 15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigments etc., complete. 16 13.48.1:finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm 17 13.62.1:painting with synthetic enamel paint of approved brand and manufacture of required colour to givean even shade:two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture . 18 od250299/2025-2026:supplying and fabricating p v c door with frame in locally available best quality including cost of all fittings labour charges etc. complete. data as per circular dated 18/6/16 19 od250303/2025-2026:supplying and fixing reinforced concrete ready made ventilator frames with bars,necessary fittings and cost inclusive of material,labour and conveyance charges etc complete. 20 17.2.1:providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:w.c. pan with isi marked white solid plastic seat and lid 21 50.17.1.4:supplying and fixing cp health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 22 18.51.1:providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms.15 mm nominal bore 23 19.33:constructing soak pit 1.20x1.20 m filled with brickbats including s.w. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. 24 50.18.8.2.2:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 kgf/ cm2 25 50.18.9.9.2:providing and fixing pvc pipes includes joints of pipes with one step pvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge. 110 mm dia 4 kg/cm2 26 50.18.8.9.2:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 110 mm pipe 4 kgf/cm2 27 50.18.9.19.2:providing and fixing pvc pipes including fixing the pipe with clamps/clips at 1.00 m spacing. this includes jointing of pipes with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 110 m dia 4 kgf/cm2 - external work - exposed on wall 28 50.18.9.17.2:providing and fixing pvc pipes including fixing the pipe with clamps/clips at 1.00 m spacing. this includes jointing of pipes with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 63 mm dia 4 kgf/cm2- external work - exposed on wall 29 50.18.9.7.2:providing and fixing pvc pipes includings jointing of pipes with one step pvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge.63 mm dia 4 kgf/cm2 30 50.18.8.7.2:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2 31 50.18.9.20.7:providing and fixing pvc moulded fittings/ accessories for rigid pvc pipes, including jointing with pvc solvent cement - 63 mm dia vent cowl 32 18.58.2.1:providing and fixing ptmt grating of approved quality and colour.rectangular type with openable circular lid150 mm nominal size square 100 mm diameter of the inner hinged round grating 33 17.7.4:providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:white vitreous china flat back wash basin size 550x 400 mm with single 15 mm c.p. brass pillar tap 34 18.63:providing and fixing ptmt angle stop cock 15 mm nominal bore, weighing not less than 85 gms 35 50.9.6.1:providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws. using anjili wood / jack wood 30 mm thick shutters 36 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal sizederived from natural sources)