tender for road work halkadhipa pwd road to sankarbahal village- 1 clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. as per approved drawing & technical specifications and as per clause - 201 of mort&h specifications for road & bridge works (5th revision) as per direction of the engineer in charge 2 dismantling of existing structures like culverts, bridges, retaining walls and other sturcture comprising of masonry, cement concrete wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable materials and stacking the serviceable materials with all lifts and lead of 1000m as per technical specification clause 202 3 concrete items 4 construction of embankment with approved materials deposited at site fromborrow pit and excavation from drain and foundation of other structures graded and compacted to meet requirement as per mord technical specification clause 301 and direction of the engineer in charge (excluding cost of excavation and transportation to site).as per the direction of engineer in charge . 5 with mechanical lead upto 1000m 6 construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement as per mord technical specification clause 301 and direction of the engineer in charge (excluding cost of excavation and transportation to site).as per the direction of engineer in charge . 7 fine dressing and turfing with one extra lead of 50m and 1.5m one extra lift as per sepification and direction of engineer-in-charge. 8 construction of granular sub-base by providing close graded granular subbase grading-iii material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density complete as per clause 401 of mosrt&h specifications for road & bridge works (4th revision) 9 providin, laying, spreading & compacting graded stone aggregate to to wet mix macadam specification including pre mixing the material with water at omc in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface & compacting with vibratory roller to acieve the desired density as per clause 406 of mosrt & h specifications for road & bridge works.(4th revision) 10 providing and applying primer coat with bitumen emulsion on prepared surface pf granular base including clearing of road surface & spraying primer at the rate of 0.60kg/sqm using mechanical means including all cost, carriage, royality, taxes of materials etc. 11 providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20kg/sqm including all cost, carriage, royality, taxes of materials etc. 12 providin & laying semi dense bituminous concret with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to site, laying with a hydrostatic paver finisher with sensore control to the required grade, level & alingment, roling with smooth wheeled, vibratory & tandem rollers to achieve the desire compaction as per clause 508 of mosrt&h specifications for road and bridge works (4th revision) as per the direction of engineer in charge . 13 sdbc grading -ii 14 filling sand-supplying & filling good clean river sand of approved quality including watering to complete saturation & ramming complete with all leads & lifts including cost, conveyance, royalty & taxes of all materials & cost of all labour & t&p required for the work etc. complete as per specification & direction of engineer in charge. 15 plain cement concrete in open foundation complete as per drawing and technical specifications (pcc grade m15) 16 foundation 17 substructure 18 construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub-base, with 43 grade cement or any other type as per clause 1501.2.2, m30 (grade) coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25mm mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars near approaches to bridges and culverts (expansion joints), admixtures as approved, curing of concrete slabs for 14 days, curing compound and water finishing to lines and grade as per drawing and technical specification clause 1501. 19 pcc m 30 20 earth work in excavation of fondation in hard soil within the initial lead & lift including dressing & levelling the bed & depositiong the excavated earth away from the site etc. all complete as per the direction of engineer in charge. 21 p.c.c. work of m-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying as per the direction of engineer in charge 22 foundation 23 r.c.c. work of m-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying as per the direction of engineer in charge 24 substructure 25 r.c.c work of m-25 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including cost, conveyance, royalty & taxes of all materials & cost of all labour & t&p required for the work etc. complete as per specification & direction of engineer in charge. 26 substructure 27 superstructure 28 supplying, fitting, and placing hysd bar reinforcement in superstructure complete as per drawing and technical specifications 29 providing laying r.c.c. hume pipe np3 class for culverts including fixing collar with cement mortar 1:2 but excluding excavation, protection work, backfilling,concrete and masonry work in head walls and parapets and as per irection of engineer-in charge. 30 1000 mm dia 31 providing weep holes is brick masonry/paln/rainforced concrete abutment, wing wall / return wall with 100mm dia ac pipe, extending through the full width of the structure wirh slope of iv:2htowards drawing force etc, complete. 32 weepholes 33 providing and fixing of typical mmsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube. all m.s. will be stove enameled on both sides. lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing . 34 providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per irc:67 made of 1.5 mm thick ms sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of mord for rural roads of required shade and colour supported and welded on 47mm x 47 mm x 12 swg sheet tube firmly fixed to the ground by mean of properly designed foundations with m-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing clause 1701.2.2 of mord 35 600mm equilateral triangle 36 800 mm x 600 mm rectangular 37 600mm circular 38 reinforced cement concrete m15 grade kilometer stone/local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and technical specification. 39 fixing of orninary km. stone 40 fixing or 200m stone 41 guide post 42 restoration of rain cuts with soil, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawings and mord technical specifications clause 1902 by manual means as per direction of the engineer in charge 43 1st year 44 2nd year 45 3rd year 46 4th year 47 5th year 48 making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at omc upto a lead of 1000 m as per mord technical specification clause 1903 as per direction of the engineer in charge. 49 1st year 50 2nd year 51 3rd year 52 4th year 53 5th year 54 stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at omc as per drawings and technical specification clause 1903. 55 1st year 56 2nd year 57 3rd year 58 4th year 59 5th year 60 repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre-mix carpet and seal coat type c as per mord technical specification clause 503,508,510,1904 as per direction of the engineer in charge. 61 1st year 62 2nd year 63 3rd year 64 4th year 65 5th year 66 maintenance of hume pipe culvert by way of clearing, cleaning, erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification clause 1908 of mord and as per direction of the engineer in charge. 67 1st year 68 2nd year 69 3rd year 70 4th year 71 5th year 72 maintenance of 200 metre, km stones & 5th km stones by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification clause 1912 of mord as per direction of the engineer in charge. 73 1st year 74 2nd year 75 3rd year 76 4th year 77 5th year 78 cutting of branches of trees from the road way or with in r.o.w including disposal of wood and leaves to suitable location as per technical specification clause 1914 of mord as per direction of the engineer in charge. 79 1st year 80 2nd year 81 3rd year 82 4th year 83 5th year 84 cutting of shurb from the road way or with in r.o.w including disposal of wood and leaves to suitable location as per technical specification clause 1914 of mord as per direction of the engineer in charge. 85 1st year 86 2nd year 87 3rd year 88 4th year 89 5th year 90 triming of grass and weeds from the shoulder/berms and disposal the same to suitable location as per technical specification clause 1914 of mord as per direction of the engineer in charge 91 1st year 92 2nd year 93 3rd year 94 4th year 95 5th year 96 white washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per mord technical specifications clause 1915 as per direction of the engineer in charge. 97 1st year 98 2nd year 99 3rd year 100 4th year 101 5th year please enable macros to view boq information