completion of half the work of virangula center at 244/1 vidhate vasti, baner. (for technical sanctioned)-item no : 1 providing and laying cast in situ/ready mix cement concrete m-25 of trap / granite /quartzite/ gneiss metal for r.c.c. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,special finish is to be provided and curing etc. complete, (excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade) ( ssr item no : 25.33 ) (pmc bhavan ) unique no (15323) rate list year (2024-2025) item no : 2 providing and laying cast in situ/ready mix cement concrete in m-25 of trap/ granite/ quartzite/ gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade) ( ssr item no : 25.52 ) (pmc bhavan ) unique no (15328) rate list year (2024-2025) item no : 3 providing and laying cast in situ/ready mix cement concrete m-25 of trap/ granite / quartzite/ gneiss metal for r.c.c. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade) ( ssr item no : 25.72 ) (pmc bhavan ) unique no (15333) rate list year (2024-2025) work id : e2_2025_p33515_b1 page 2 of 15 budget code: item no : 4 providing and laying cast in situ/ready mix cement concrete in m-25 of trap/ granite/ quartzite/ gneiss metal for r.c.c. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade) ssr item no : 26.19 ) (pmc bhavan ) unique no (15342) rate list year (2024-2025) item no : 5 providing and fixing in position tmt - fe - 500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. ssr item no : 26.33 ) (pmc bhavan ) unique no (15352) rate list year (2024-2025) item no : 6 providing fly ash brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. complete ssr item no : 27.13 ) (pmc bhavan ) unique no (15381) rate list year (2024-2025) item no : 7 providing second class fly ash brick masonry with conventional / i.s. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. ssr item no : 27.14 ) (pmc bhavan ) unique no (15382) rate list year (2024-2025) item no : 8 providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. ssr item no : 32.11 ) (pmc bhavan ) unique no (15444) rate list year (2024-2025) work id : e2_2025_p33515_b1 page 3 of 15 budget code: item no : 9 providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. ( ssr item no : 32.04 ) (pmc bhavan ) unique no (15439) rate list year (2024-2025) item no : 10 providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. ( ssr item no : 32.15 ) (pmc bhavan ) unique no (15447) rate list year (2024-2025) item no : 11 providing waterproofing in w.c. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years’ guarantee on requisite stamp paper including curing etc. complete. ( ssr item no : 31.26 ) (pmc bhavan ) unique no (15435) rate list year (2024-2025) item no : 12 providing cement based water proofing treatment to terraces (indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in c.m.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with c.m.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years guarantee against leakproofness on court fee stamp paper of rs. 500/- including ponding test etc. complete. ( ssr item no : 31.04 ) (pmc bhavan ) unique no (15421) rate list year (2024-2025) item no : 13 providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to i.s.15622/2006 (group d ii-a) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. ( ssr item no : 33.24 ) (pmc bhavan ) unique no (15492) rate list year (2024-2025) item no : 14 providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding i.s. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. ssr item no : 33.27 ) (pmc bhavan ) unique no (15495) rate list year (2024-2025) item no : 15 providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / amba white / cat bary brown / rbi red / ocean brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. ssr item no : 33.35 ) (pmc bhavan ) unique no (15503) rate list year (2024-2025) item no : 16 providing and laying machine cut machine polished kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 c. m. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. ssr item no : 33.06 ) (pmc bhavan ) unique no (15474) rate list year (2024-2025) item no : 17 providing and applying two coats apex ultima puranature anti- pollution or equivalent approved brand, paint should decomposes organic substances and inorganic gases(nox vocs, co, sox, formaldehydes, etc.) in presence of natural or artificial light. it contains graphene and nanoparticles of titanium oxide. and absorbs co2 (4.8 kilogram/151), plaster crack should be filled by acrylic base crack seal/textured crack filler, paint has to applied on one coat of apex ultima puranature anti-pollution primer or equivalent. warranty should be given by the manufaturer the work should be done by the manufacturer recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist ssr item no : 63.16 ) (pmc bhavan ) unique no (16705) rate list year (2024-2025) item no : 18 providing and applying interior wall finish luster of approved make on internal wall surface as detailed below scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. scrapping with emery paper 180 and wipe clean. applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller scrapping emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and oil with roller 19 to 21% after 8 hours of activity applying 2nd coat or wall finish lustre with mineral turpentine 7 to 9 % with brush and oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (with prior approval of s.e.) ( ssr item no : 36.20 ) (pmc bhavan ) unique no (15594) rate list year (2024-2025) item no : 19 providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. ( ssr item no : 36.11 ) (pmc bhavan ) unique no (15587) rate list year (2024-2025) item no : 20 providing and applying priming coat on concrete/ masonary/ asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. ( ssr item no : 35.21 ) (pmc bhavan ) unique no (15571) rate list year (2024-2025) item no : 21 providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make, etc complete. ( ssr item no : 32.34 ) (pmc bhavan ) unique no (15466) rate list year (2024-2025) item no : 22 providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. ( ssr item no : 39.10 ) (pmc bhavan ) unique no (15684) rate list year (2024-2025) item no : 23 providing and fixing frame with / without ventilator of size as specified with country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete ( ssr item no : 39.1 ) (pmc bhavan ) unique no (15675) rate list year (2024-2025) item no : 24 laminates sheets 1 mm thick : providing and fixing laminates sheets as per company specification and fix it with fevicol – recommended companies- formica, royal touch, marino , green lam , euro. ( 1 mm thick laminates sheets ) ( ssr item no : 62.23 ) (pmc bhavan ) unique no (16566) rate list year (2024-2025) item no : 25 providing and fixing 32 mm thick one piece single moulded puff abstrone butadyne styrine (abs) door shutter for internal use including toilets made up of outer abs sheet of 1.2 mm thick having puff insulation of 35 to 40 kilogram/cubic metredensity and 10 mm dia.for steel bars 2 nos., wooden block to receive fixtures, having m.s. hinges 100 mm length, m.s. handles 150 mm length and 10 mm dia sliding door bolt etc. complete ( ssr item no : 39.80 ) (pmc bhavan ) unique no (15756) rate list year (2024-2025) item no : 26 providing and laying telephone black / amba white / cadburybrown / ruby red / ocean brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. on c.m. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. ( ssr item no : 33.68 ) (pmc bhavan ) unique no (15533) rate list year (2024-2025) item no : 27 providing and fixing in position (as per 1868 / 1982) aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kilogram/running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kilogram/running metre.. top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kilogram / running metre. the shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kilogram/running metre. inter locking section 40 x 18 x 1.10 mm at weight 0.469 kilogram/running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kilogram / running metre. as per detailed drawings and as directed by engineerincharge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. with powder coating with box ( ssr item no : 39.43 ) (pmc bhavan ) unique no (15717) rate list year (2024-2025) item no : 28 providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. ( ssr item no : 39.68 ) (pmc bhavan ) unique no (15744) rate list year (2024-2025) item no : 29 providing and fixing mild steel grill work for windows, ventilators, etc. 15 kilogram/square metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. ( ssr item no : 40.2 ) (pmc bhavan ) unique no (15773) rate list year (2024-2025) item no : 30 providing and fixing mild steel grill railing weighing 15kilogram/ square metre. with pvc handrail cover and newel post for staircases, including fabricating, fixtures, drilling holes in concrete / other surface, erecting the grill work, necessary welding, fixing by nuts and bolts, fixing pvc handrail cover, with one coat of anticorrosive paint and two coats of oil painting with approved colour and shade, remaking the damaged surface, cleaning, etc. complete. spec. number : as directed by engineer in charge. ( ssr item no : 40.10 ) (pmc bhavan ) unique no (15781) rate list year (2024-2025) item no : 31 providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of m.s. flats of size 18 x 5 mm t or e section for runner of minimum 40 x 6 mm size for flange, m.s. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade f.g. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (i.s. 105211983). ( ssr item no : 39.26 ) (pmc bhavan ) unique no (15700) rate list year (2024-2025) item no : 32 structural glazing : providing structural glezing using min.6mm thick saint-gobain make reflective glass in any shade as per requirement.it includes aluminium framework of rectangular aluminium tube of size 64mm x 58mm and electro coloured to 15 microns .the aluminium extrusions is manufactured asper is 63400.dow corning 995 silicone structural glazing sealant is to be used for fixing glass with aluminium frame.high quality expansion bolts with good load bearing capacity is to be used for fixing aluminium frame to wall.it also includes scaffolding and other necessary fittings. ( ssr item no : 69.21 ) (pmc bhavan ) unique no (17038) rate list year (2024-2025) etc