providing material for bandhara durusti shekte bk @ kshirsagar wasti-2 excavation in all kinds of soils & soft murum including boulders up to 0.6 m diameter (0.113cum) for canal, seating of embankment, filter drains / catch water drains etc.. and placing the excavated stuff neatly in dump area or for formation of service road embankment as directed including cost of all materials, machinery. labour, dressing bed and sides to required level and profile etc.. complete with lead up to 15 m and 6m lift. 3 excavation in hard murum including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment. filter drain / catch water drains etc.. and placing the excavated material neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc.. complete with lead up to 15 m and 6m lift. 4 excavation in soft rock without blasting including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment. filter drain / catch water drains etc.. and placing the excavated soft rock neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc.. complete with lead up to 15 m and 6m lift. 5 providing and laying rubble soling below foundation in layers including filling with rubble chips, murum etc. complete (excluding royalty of material) dwoun strimm 6 providing and laying in situ cement concrete of grade m-15 of trap /granite/gneiss/quartzite/graded metal for pcc with or without surface reinforcement/rcc concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls. piers, abutments etc. with concrete mixer with shuttering and scaffolding, placing, compacting, curing with an initial lead of i km and all lifts etc. complete as directed 7 providing steel for r.c.c. work with all leads and lifts & cutting. bending, hooking, laying in position and tying m.s./hysd/tmt bars for reinforcement of r.c.c. work as per detailed drawing etc. complete. 8 nalla trenching 9 providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge m.s. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coal of sine chromate storing primer and two coats cach of green/white back, ground and back side grey store enamelled bonded with red retro reflective sheet engineering grade, border/letters/numeral/a arrows coated sith non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of g.l. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying. fixing in ground with cement concrete in m-15 block of size 60 x 60 x 75 cm as directed by engineer-in-charge