work through running contract under the business plan in the work area of ​​electricity distribution division - behat.-2 safely cartage of pcc / st pole 8.5 / 11 mtr. long from esc, sre to the site of work including loading unloading at both ends. ( dist. up to 30 km. ) 3 erection of single support on pcc / st poles up to 8.5 mtrlong with complete fitting of all accessories of11 kv / lt as per respo specification 4 safely carriage of line material esc sre to site of works through privet vehicle including loading and unloading at both ends. ( distance 0 to 30 k.m. ) 5 fabrication and erection of d / p on pcc poles / sp55 8.5 mtr. long with complete fitting including concreting in block of 450x450x1500mm. in ratio 1:4:8 with cement, sand and brick ballast size 1”x1.5” as per respo specification. 6 fixing of stay rods by digging of pits in block of 600x600x300 mm. &with new brick and nozzling of stay wire 7 / 10 swg and fitting the same on the pole 7 safely carriage of abc ( 3x95+1x70+1x16 ) ( 3x50+1x16+1x35 ) ( 3x50+1x35+1x16 ) sq.mm. conductor from esc sre to site of work including loading and unloading at both ends. 8 laying, lifting, stringing, proper sagging abc3x95+1x70+1x16 ) ( 3x50+1x16+1x35 ) cable of size 120 sq.mm. including fixing of all type clamps and connector of all accessories. 9 laying, lifting, stringing, sagging jumpring & binding of acsr weasel conductorfor11 kv & lt line including complete. 10 laying and making connection of lt lead size1x240 sq.mm. from t / f to double pole. 11 fixing of 3 phase distribution box properly. 12 safely removal of 63 kva t / f from site of work toesc, sre including loading & unloading at both ends. ( dist. upto 30 km. ) 13 safe cartage of 25 / 100 kva t / f from esc, sre, to the site of work including loading & unloading at both ends. ( dist. upto 30 km. ) 14 safe installation of 25 / 100 kva t / f on the double pole with complete fittings including making connections and commissioning. 15 earthing of pole by earthing rod 16 providing & fixing of brass lugs properly as per respo specification. 17 providing and fixing of all type clamp with nut & bolt 18 providing and fixing of prc clamp as per respo specification. 19 re-straightening of tilted pole 20 tightening of loose stay wire.