running contract work based full deposit work time to time in the area of edsd deoband under edd deoband-2 safely cartage of pcc/st pole sp-55 11 mtr. long from esc, sre to the site of work including loading unloading at both ends. (dist. up to 25 km.) 3 safely cartage of other complete material (except pcc/st poles ) from esc, sre to j.e. store & other place than the site of work including loading unloading at both ends.( dist. up to 25 km.) 4 fabrication and erection of double pole on st pole sp-55 11 mtr. long with complete fitting of all accessories of lt line as per respo specification. 5 erection of single support on pcc poles up to 8.5 mtr long with complete fitting of all accessories of 11 kv as per respo specification. 6 concreting of of pole in size 450x450x1500 mm. in ratio 1:4:8 with cement, sand and brick ballast size 1x1.5 with plinth as per respo specification. 7 fixing of 11 kv stay rods by digging of pits in block of 600x600x300 mm. & with new brick and nozzling of stay wire 7/10 swg and fitting the same on the pole 8 safe cartage of 25/63/100 kva t/f from esc,sre, to the site of work including loading & unloading at both ends. (dist. upto 25 km.) 9 safe installation of 25/63/100 kva t/f on the double pole with complete fittings including making connections and commissioning. 10 providing & fixing of all type clamp of st poles with nuts bolts made of new ms flat iron 50x6 mm as per respo specification. 11 laying, lifting, stringing, sagging jumpring & binding of acsr weasel/rebbit/dog conductor for 11 kv line as per respo specification including complete. 12 providing and fixing of stone pad. 13 providing and fixing of danger board with clamp peroperly. 14 providing and fixing of number plate 15 earthing of pole by earthing road. 16 laying and making connection of lt pvc cable 1x240 sq.mm. from t/f to double pole. 17 off shooting of tree branches touching the above 11 kv line