tender for miscellaneous work in municipal area jobner on the arc basis. - 1 dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer. cement concrete grade m-15 and above and pcc blocks 2 carriage of materials by mechanical transport including loading, unloading and stacking 2 km lead. 3 providing and laying lean cement concrete 1:4:8 in sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in concrete mixer, laidmanually, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. block base, patch 4 steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works. 5 providing and fixing of reinforced ferro-cement drain covers designed for aa class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistancecompound, abrasion resistant complete as per approved design etc. standard size 600x800mm (75mm thick) for span 300 to 450mm 6 providing and fixing of reinforced ferro-cement drain covers designed for aa class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistancecompound, abrasion resistant complete as per approved design etc. standard size 1000x800mm (100mm thick) for span 451 to 700mm 7 providing and fixing of reinforced ferro-cement drain covers designed for aa class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistancecompound, abrasion resistant complete as per approved design etc. standard size 1500x600mm (125mm thick) for span 701 to 1200mm 8 providing and fixing of reinforced ferro-cement drain covers designed for aa class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistancecompound, abrasion resistant complete as per approved design etc. standard size 2100x500mm (150mm thick) for span 1201 to 1500mm 9 providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). cc, patch 10 providing and fixing of precast concrete interlocking tiles of desired shape of m 30 grade manufactured from fully computerized automatic stationery hydraulic vibrio pressed machine and fully computerized automatic batching plant of class a1/a2 as per bs6717:2001. the cc interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. laying procedure on compacted sub-base as defined.complete job is to be executed as per the instruction of engineer incharge. the rates to be inclusive of all lead & lifts etc. complete asper specifications. tensile splitting strength, abrasion and braking load etc. as per bs 6717:2001, grey cement. 60mm thick . 11 providing and fixing precast cement concrete m-20 grade (using mechanical concrete mixer) kerb stone top and bottom width 115 and 165 mm respectively, 250 mm high on 150 mm thick pcc m-10 grade foundation as per design, including fixing at site as per clause 408 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. 12 providing and laying marking of center line and stop line etc with hot thermoplastic compound 2.5 mm thick on road/ plain surface, including reflectorising glass beads @ 250 gms per sqm area with special applicator machine, as per irc:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. the finished surface to be level, uniform and free from streaks and holes as per clause 803 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.