tender for construction of interlocking tiles along with tin shed at cremation ground, ward no. 16 - dressing of earth work in surface excavation including cutting and filling upto 30cm depth including disposal of excavated earth upto 50m and lift upto 1.5 m. 2 earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per mort&h specification clause 301. in all type of soil 3 providing, laying and spreading of granular sub-base by providing coarse graded material (table 400-2), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion. grading - iii material 4 providing and laying lean cement concrete 1:4:8 in sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in concrete mixer, laid manually, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. 5 providing and fixing of precast concrete interlocking tiles of desired shape of m 30 grade manufactured from fully computerized automatic stationery hydraulic vibrio pressed machine and fully computerized automatic batching plant of class a1/a2 as per bs 6717:2001. the cc interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. laying procedure on compacted sub-base as defined. complete job is to be executed as per the instruction of engineer in-charge. the rates to be inclusive of all lead & lifts etc. complete as per specifications. tensile splitting strength, abrasion and braking load etc. as per bs 6717:2001, grey cement. 100mm thick 6 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/ mortar. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 7 reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete. hot rolled deformed bars 8 cement plastering including t&p, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/ mortar. 1:6 (1 cement : 6 fine/ coarse sand) 9 providing corrugated g.s. sheet roofing including vertical/ curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80mm thick with zinc coating not less than 275gm/m² 10 structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: 11 providing & fixing in position, ms fabrication work using angles, sqr tubes, c channels etc for various partition frame as per design & instructions & complete in all aspects . including all materials labour, finishing etc complete 12 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. new work (two or more coats) over and including priming coat with cement primer.