annual plan-cheacode grama panchayatcheacode government up school wiring-s0397/26-general electrical work- 1 electrical 2 1.10.3:wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc as required.group c 3 1.25:supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 4 90.3.20.3:supply & installation of light fittings on tw round block supply, conveyance installation testing and commissioning the light fittings of following types made of crca with 0.5mm thicknesscomplete with all accessories andlamps etc. directly on wall or ceiling with pvc round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant iss and giving connections as required.1200 mm 1x20w led lamp with box type fixture 5 19.1:supply, installation, testing and commissioning of 1200 mm sweep bee-5 star rated ceiling fan with brushless direct current motor (bldc) , class of insulationb , 3 no:s blades , 30 cm long down rod , 2no:s canopies, shackle kit, safety rope , copper winding, power factor not less than .9, service value (cm/m/w) minimum 6.00, air delivery minimum 210 cum/min,350 rpm (tolerance as per is :374-2019, thd less than 10% remote or electronic regulator unitfor speed control and all remaining accesories including safety pin, nut and bolts , washers, temperature rise equal to 75 deg celsius ( maximum) , insulation resistancemore than 2 megaohm , suitable for 230v,50 hz, single phase ac supply , earthing etc., complete as required: 6 90.4.1:supply and installation of suitable size ms rod type fan clamp in the rcc slab as per is 732 as required. 7 1.58:supplying and fixing pvc batten/ angle holder including connection etc. as required. 8 od260204/2025-2026:supplying and fixing 9 w led bulb including connection etc. as required 9 od260222/2025-2026:supply, installation testing and commissioning exhaust fan of size 300/305 mm sweep light duty exhaust fan in metal frame working on 230 v a/cs in the existing opening, fixing necessary anchor bolts/bolt and nut withneatly plastered in the existing exhaust fan hole, making good the damages, color washing etc as required and giving connection with required length ofpvc insulted and pvc sheathed 650/1100v grade 3 core round copper conductor flexible wire 10 90.4.8:charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required. 11 1.27.2:supplying and fixing following size/ modules, gi box alongwith modular base & cover plate for modular switches in recess etc as required.3 module (100mmx75mm) 12 1.27.5:supplying and fixing following size/ modules, gi box alongwith modular base & cover plate for modular switches in recess etc as required.8 module (125mmx125mm) 13 90.10.1.2:supply & fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (rohs compliant )2 module moulded plastic box on surface 14 90.10.3.15:supply and fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (rohs compliant )32a dp switch with indicator 15 1.24.1:supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch 16 1.24.4:supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet 17 1.21.1:supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm 18 1.21.2:supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm 19 1.17.3:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel/ pvc conduit as required.3 x 1.5 sq.mm 20 1.17.6:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel/ pvc conduit as required.6 x 1.5 sq. mm 21 1.17.24:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel/ pvc conduit as required.6 x 4 sq. mm 22 90.11.1.10:supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of mcb db including copper /brass bus bar, neutral link, earth bus and din rail suitable for fixing mcb/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (ip 42/43) 23 2.13.1:supplying and fixing following rating, four pole, 415 volts, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required.40 amps 24 2.15.2:supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (rccb), having a sensitivity current30 milli amperes in the existing mcb db complete with connections, testing and commissioning etc. as required. 40 amps 25 2.10.1:supplying and fixing 5a to 32 a rating, 240/415 volts, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. single pole 26 2.10.4:supplying and fixing 5a to 32 a rating, 240/415 volts, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. triple pole 27 2.11:supplying and fixing single pole blanking plate in the existing mcb db complete etc. as required. 28 90.12.5.27:supply & laying of one number pvc insulated and pvc sheathed armoured aluminium power cable of 1.1kv grade of the following sizes in the existing rcc/ hume / stone ware/ gi/ dwc pipe as required.3.5 core 25 sq mm 29 90.12.7.27:supply, laying and clamping of 1 no. pvc insulated and pvc sheathed armoured aluminium power cable, 1.1 kv grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 25 sq mm with factory made clamp 30 9.1.20:supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3 1/2x25 sq.mm (28mm) 31 90.12.9.2:supplying, laying and jointing of the following sizes of double wall corrugated (dwc) pipes made out of hdpe conforming to is 14930 part ii for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size 32 od260218/2025-2026:supply, threading ,laying and jointing of the 32 mm b class gi pipe with all required accessories in ground in he existing trench as protective covering to ug cable