tender for extension of sgr and other miscellaneous civil work at 33 / 11 kv s / s birdpur district- siddharthnagar . - excavation in foundation in ordinary soil ( loam clay or sand ) including lift upto 1.5 meterand lead upto 30 meterand including filling, watering, and ramming of excavated earth into the trenches or into the space between the building and the side of the foundation work. ( c.s.i. no 4.01 ) 2 concrete with 4 cm.gauge 1st class brickballast, coarse sandand cement in proportion of 8:4:1 in foundation and under floors and supply of all materials, labour and t&p etc. complete. ( c.s.i. no. 5.04 ) 3 1st class brickwork in 1:6 cement and coarse sand . mortar in foundation and plinth including supply of all materials, labour and t&p etc. required for proper completion of the work. ( c.s.i. no.6.01 ) 4 same as in item no. 3above b.w. in 1:6 in super structures but for wall one brick ( 230mm ) thick ( c.s.i. no. 6.01+6.07+6.08 ) 5 same as in item no. 3 above but b.w. in 1:4 in super structures but for wall up brick ( 115mm ) thick ( c.s.i. no. 6.03+6.07++6.09 ) 6 r.c.c. work with cement, approved coarse sand and 2 cm.gauge approved stone ballast in the proportion of 1:1.5:3 in the lintels of doors and windows excluding reinforcement and its bending but including its fixing and binding the same with 24 bwg, g.i. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and t&p etc. ( c.s.i. no. 5.23 ) 7 same as item no. 6 above but for slabs ( c.s.i. no. 5.24 ) 8 same as item no. 6above but for t-beam in slab roof and column. ( c.s.i. no. 5.29 ) 9 same as item no. 6above but for raft in foundation. ( c.s.i. no. 5.27 ) 10 s / f of hexagonal fan box ( p.s.i. no. 1149 ) 11 tmt / tor steel in plain work such as reinforced concrete or reinforced brick work. ( when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage, bend hooks, and authorized overlapping shall be measured. ( c.s.i. no. 9.03 ) 12 mild steel or iron work in heavy sizes such as trusses, built-up gates, door frames, record racks, roof work, gates etc. wrought to required form including drilling holes rivetting or welding where necessary and also fixing in proper position and alignment including supply of steel, nuts wastage etc. and their fixing as required for proper completion of the work ( csi no. 9.01 ) 13 providing and laying floor with 18 mm. thick kota stone over base cement morter 1;4 mix and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete and including supply of all materials labour and t&p etc required for proper completion of the work ( csi no. 12.17 ) 14 s / f 8mm thick white glazed somany, johnson etc 1st quality tilesin flooring, laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials labour and tools and plants etc. required for proper completion of the work. ( csi 12.11 ) 15 s / f 6 mm thick white glazed tilesin skirting / dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials labour and tools and plants etc. required for proper completion of the work. ( csi 12.12 ) 16 12 mmthick plaster with cement mortar in proportion of 1:6 cement and approved coarse sand over brick work, minimum thickness not to be less than 1 cm. including supply of all materials, labour and t&p etc. required for proper completion of the work ( c.s.i. no.11.09 ) 17 same as item no 16 above but in proportion 1:4 cement & coarse sand ( c.s.i. no. 11.07 ) 18 same as item no 16 above but in proportion 1:3 cement & coarse sand ( c.s.i. no. 11.06 ) 19 add for extra labour and matarials for plaster over rough face of one brick wall. ( c.s.i. no. 11.12 ) 20 3mm thick floating coat of neat cement finish over roof and wall with water proofing compound including cost of all materials, labours and t&ps etc. required for proper completion of the work ( csi no.11.20 ) 21 providing / making drip course ( 25x12 ) mm in 1:2 cement & coarse sandincluding cost of all materials, labours and t&p s etc. required for proper completion of work. ( c.s.i. no. 11.19 ) 22 earth filling under floors and in substation area including cost of earth. earth to be obtained from outside the corporations area including its cartage and ramming, watering, dressing in 20 cm. thick layers and dressing of earth etc. complete ( c.s.i. no.4.10 ) 23 river bed sand filling in plinth including supply of necessary quantity of sand from a distances not exceeding 8 kms. ( 5 miles ) from the site of work including watering ramming and dressing etc. rate include cost of all materials, labour and t & p etc. required for proper completion of the work. ( c.s.i. no. 4.05 ) 24 s / f of mosquito proof jali ( 16x24 gauge ) with ( 20x3 ) mm. flat, on both sides screwed or welded to window or door frame. ( c.s.i. no. 9.18 ) 25 applying birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ici or equivalent brand for smoothening and levelling of the surface as per requirement and direction of engineer i / c including cost of all material, labour, t & p etc required for proper completion of work. ( csi no. 13.20 ) 26 painting two coat with apex or equivalent brand weather coat paint on new wall surfaces ( well prepared with birla putty and one coat of primer ici or equivalent which shall be paid separately ) including through washing with water including cost of all materials, labour, t&p required for proper completion of work. ( csi no. 13.22+13.23 ) 27 painting two coat with acrylic emulsion paint of berger / asian / ici or equivalent paint ( paint and water in the ratio 1:1 by volume ) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and t&p etc required for proper completion of the work, ( preparation of base with birla putty etc. and a coating of primer shall be paid extra ) . ( csi no. 13.25+13.26 ) 28 painting or varnishing new iron works or new wood work with one coat of ready mixed priming paint and two coats of approved superior quality ready mixed paint luxol or equivalent brand or varnish including supply of all materials, labour& t&p etc. required for proper completion of the work ( c.s.i. no. 13.01+13.02 ) 29 concreting for 40 mm thick r.c.c. trench covers in mild steel frame work with c.c. 1:1.5:3 in cement, coarse sandgauge hard stone ballast with neat cement finish on top and bottom complete with all labours, materials, t&p etc. required for proper completion of the work but excluding cost of frame. ( c.s.i. no. 5.18 ) 30 cement concrete with 2cm. gauge approved stone ballast, approved coarse sandand cement in the proportion 4:2:1 including supply of all materials, labour and t&p etc. required for proper completion of the work. ( c.s.i. no. 5.06 ) 31 supply and fixing p.v.c. cistern hindustan or equivalent make 10 litres. capacity complte with all accessories ( low level ) including all materials, labour and t&p etc complete. ( csi 27.12 ) 32 providing and fixing white glazed china earthen ware water closet squatting orisa type pan weaper size 580mm hindustan make or other equivalent approved make without ptrapincludingcost of all materials, labour and t&p etc. complete ( c.s.i.no. 27.01+27.24 ) 33 providing and fixing 550 mm x 400 mm. wash hand basin of white glazed earthern ware first quality i.s.i. marked ( hindustan, neycer / cera make ) including supply of all materials, labour and t&p etc.for proper completion of the work . ( csi no. 27.08 ) 34 supply and fixing nahani trap india make of heavy approved quality complete with c.p. brass grating, nahani trap laid over base cement concrete 1:6:12 including cost of cement supply of all materials, labour and t&p etc. required for proper completion of the work. ( csi 27.21a ) 35 providing and fixing in position 32 mm. dia p.v.c. waste pipe for wash basin. with unions, bends etc. including supply of all materials, labour and t&p etc.required for proper completion of the work. ( csi no. 27.14 ) 36 providing and fixing ci cover with frame complete 450 mm internal dia.includingall materials, labour cartage t&p etc.required for proper completion of the work. ( csi no. 27.27 ) 37 wiring point for light with 1 sqr mm pvc insulated multistrand single core copper conductor cable in pvc conduit with 1.5 sqr mm fr pvc insulted multistrand copper conductor cable as earth wire drawn inside the conduit with piano type swith and ceiling rose / angle / batten holder on 3 mm thick phenolic lamenated backelite sheet etc. complete in all respect as directed. ( psi 131 c ) 38 same as item no. 37 above but for fan point ( p.s.i. no. 133c ) 39 same as item no. 37 above but for plug point ( p.s.i. no. 134c ) 40 supply and fixing of batten holder / angle holder complete ( p.s.i. no. 405 ) 41 supply and wiring of sub main with two nos 4 sq.mm f.r.p.v.cinsulated 1100v grade copper conductor, cable in 25mm dia heavyduty ( 2mm thick ) pvc conduit with 2.5sq mm multistrand copper conductor cable as earth continuity wire drawn in conduit . p.s.i no. 216b ) 42 supply and fixing of led tube light fitting of approved make suitable for 1x422 watt flourescent tube complete including tube etc. on surface complete in all respect ( p.s.i. no. 1413 cat aaa ) 43 supply and burying of 600mm x 600 mm x 6.0mm g.i. plate verticallyfor earthing with its top at least 3 metres below ground level complete with 20mm dia g.i. pipe and funnel for watering and one earthing lead of one no. 8 to 10 swg gi wire in 15mm dia g.i. pipe up to switch board ( from appron to switch board the cost of g.i. pipe and g.i. wire will be extra ) 30cm square c.i frame with hinged cover masonry housing alternate layers of charcoal / coke and salt at least 150mm thick alround tec. as per direction of e / i complete in all respects as per drawing.psi no. 703 44 supply and fixing of 5 amps to 32 amps mcb 9ka / 10ka havells or equivalent make ( p.s.i. no. 1002 cat-a ) 45 supply and fixing of power plug with 15amps. 250v. flush type switch and 3pin 15a-250v. flush type socket in suitable teak wood box of 175x100x50m. size with bakelite sheet cover 3mm. thick fixed with brass machines screws and washer ( p.s.i.no.1139a ) 46 supply and fixing of 3 blade ceiling fan 1200 mm of havells or equivalent including all material, t&p etc required for proper completion of work as approved by engineer in charge. ( csi no. 28.39 ) 47 providing m.s. frames work for r.c.c. trench covers and edging with m.s. angles including cutting, bending and welding of m.s.bars for reinforcementand lifiting hooks as per approved design. the rate is including cost of all labour, materials etc. as required for proper completion of the work. ( c.s.i.no. 9.20 ) 48 cement concrete with 2cm gauge approved hard stone ballast, coarse sand and cement in proportion of 3:1.5:1including supply of all materials, labour, side shuttering ifrequired and t&p etc. required for proper completion of work ( csi no. 5.21 ) 49 dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theengineer-in-charge within a distance of 60 metres. ( csi no. 15.01 ) 50 providing and fixing steel glazed window and ventilators ofstandard rolled mann or mahavir steel sections conforming to is7452-1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. size of 1:3:6 proportion i.e. first part of cement 3 part of approved coarse sand & 6 part of graded stone ( aggregated 20mm. nominal size ) s / f of glass panes of plain pin headed 4mm. thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. the fabrication should conform to i.s.1038-1975. ( aluminum beading with rubber packing included ) . ( csi no. 9.17 ) 51 repair to plaster or pointing in patches including removal of old plaster racking out joints to 1 cm. ( 3 / 8 ) depth, watering the area and then replastering or reappointing with the same mortar or proportion of mortar as the existing surface including supply of all materials, labour and t&p etc. required for proper completion of the work . ( csi no.11.09+ 20.02 ) 52 concrete with 4cm gauge i class brickballast, coarse sand and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. ( csi no.5.01 ) 53 dismantling reinforced cement concrete or reinforced brick work, including stacking of dismantled materials as directed by theengineer-incharge within a distance of 60 metres. ( csi no. 15.03 ) 54 dismantling cement concrete or brick or granolithic floorsincluding base concrete and including stacking of dismantledmaterials as directed by the engineer in-charge within a distanceof 60 metres. ( csi no. 15.05 ) 55 providing ( 12x15 ) mm section groove in plasterincluding all material, labour andt&p etc. required for proper completion of the work. ( csi no. 11.16 ) 56 painting two coat with apexof asian paint or equivalent make including 3 coats of above and including one priming coat on previously treated surface surface to give an even shed including cost of all materials, labour and t & p etc. complete. ( csi no. 13.24+13.23 ) 57 painting two coat with acrylic emulsion paint of berger / asian / ici or equivalent paint ( paint and water in the ratio 1:1 by volume ) over previously treated surface of cement concrete, cement plaster and bricks including all labour, material and t&p etc required for proper completion of the work, ( preparation of base with birla putty etc. and a coating of primer shall be paid extra ) . ( csi no. 13.27+13.26 ) 58 painting or varnishing on previously painted wood or iron work with one coat of ready mixed priming paint and two coats of approved superior quality ready mixed paint luxol or equivalent brand or varnish including supply of all materials, labour& t&p etc. required for proper completion of the work ( c.s.i. no. 13.03+13.02 ) 59 providing and fixing of 110 mm dia pvc pipe 6 kg / sq.cm forwith special such as tee, bend, socket, elbow etc including supply of all labour, material, t & p etc complete required for proper completion of work. ( csi no. 26.17 ) 60 providing and fixing 15 mm dia b-class jindal, jtc, isi marked g.i. pipes complete with with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete. ( csi 26.01a ) 61 as above item no. 60 but for 20 mm dia. ( csi 26.01b ) 62 supply and fixing brass bib cock of heavy quality 15 mm dia ( 400 gms ) isi mark including supply of all materials, labour, t&p etc complete. ( csi 26.16a )