miscellaneous civil works at 33 / 11 kv substation sector-8, noida.- 1 excavation in foundation in ordinary soil ( loam clay or sand ) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. csi no. 4.01 2 earth filling under floors and / or sub station area including cost of earth when obtained from with in 8 kmoutside uppcl area including its roylty and carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete.csi no. 4.10 3 concrete with 4cm gaugestone ballast, coarse sand ( f.m. 1.8 to 2.5 ) & cement in proportion of 12:6:1 in foundations &under floors including supply of all materials, labour and tools and plants etc. required for proper completion. csi no. 5.02 4 cement concrete with 2cm gauge approved hard stone ballast, coarse sand ( f.m. 1.8 to 2.5 ) and cement in proportion of 4:2:1including supply of all materials, labour, side shuttering ifrequired and t&p etc. required for proper completion of work. csi no. 5.06 5 concreting of 40 mm thick rcc trench covers in mild steel framework with rcc 1:1.5:3 in cement, chopan coarse sand ( f.m. 1.8 to 2.5 ) and 2cm gaugegraded hard stone ballast with 3mm thick floating coat of neatcement finish on top of cover complete with all labour, materials and placing the same in proper position at required location of cable trench within the substation area. csi no. 5.18 6 cement concrete with 2cm gauge approved hard stone ballast, coarse sand ( f.m. 1.8 to 2.5 ) and cement in proportion of 3:1.5:1including supply of all materials, labour, side shuttering ifrequired and t&p etc. required for proper completion of work. csi no. 5.21 7 rcc work with cement, approved coarse sand ( f.m. 1.8 to 2.5 ) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p csi no. 5.23 8 rcc work with cement, approved coarse sand ( f.m. 1.8 to 2.5 ) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from dalla, jhansi or other quarries in proportion 1:1.5:3inslab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p. csi no. 5.24 9 rcc work with cement, approved coarse sand ( f.m. 1.8 to 2.5 ) and2 cm gauge graded approved hard stone ballast like granite quartzite etc from dalla, jhansi or other quarries in proportion1:1.5:3 in raft foundation and footings , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and t&p. csi no. 5.27 10 first class brick work in 1:6 cement and coarse sand ( f.m.1.8 to 2.5 ) mortar in foundation and plinth including supply of allmaterials, labour & t&p etc. required for proper completion of work. csi no. 6.01 11 first class brick work in 1:6 cement and coarse sand ( f.m.1.8 to 2.5 ) mortar for one brick thick wall ( 230mm ) in super structure including supply of all materials, labour & t&p etc. required for proper completion of work for wall of one brick thick ( 230mm ) csi no. 6.01+6.07+6.08 12 first class brick work in 1:4 cement and coarse sand ( f.m.1.8 to 2.5 ) mortar for wall of 1 / 2 brick thick ( 115 mm ) in super structure including supply of all materials, labour & t&p etc. required for proper completion of work for wall of 1 / 2 brick thick ( 115 mm ) csi no. 6.03+6.07+6.09 13 brick work in foundation & plinth with old dismantledbricks ( supplied by department free of cost ) and coarse sand of f.m. 1.8 to 2.5mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks, t&p etc complete. csi no. 6.18 14 supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made ) commercial quality to i.s.2202 part-1 ( 1983 ) isi marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts. locks, handles, springs and other fittings but excluding their supply including all materials, labour & t&p etc. required for proper completion of work. csi no. 8.57 15 mild steel or iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. csi no. 9.01 16 tmt / tor steel in plain work such as reinforced concrete orreinforced brick work ( when not included in an over all rates ) wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. ( steel shall be arranged by the contractor ) csi no. 9.03 17 providing and fixing steel glazed window and ventilators ofstandard rolled mann or mahavir steel sections conforming to is7452-1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. size of 1:3:6 proportion i.e. 1 part of cement 3 part of approved coarse sand & 6 part of graded stone ( aggregated 20mm. nominal size ) s / f of glass panes of plain pin headed 4mm. thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. the fabrication should conform to i.s.1038-1975. ( aluminum beading with rubber packing included ) . csi no. 9.17 18 supply and fixing galvanised mosquito proof jali ( 16x24 gauge ) withm.s. flat of 20 x 3 mm. size, on both sides screwed or welded to windowor door frame. csi no. 9.18 19 12 mm thick plaster with cement mortar consisting of one part of cement & three part of coarse sand ( 1:3 ) , minimum thickness not to be less then 10 mm including supply of all materiallabour and t&p etc for proper completion of work. csi no. 11.06 20 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand ( 1:4 ) , minimum thickness not to be less then 10 mm including supply of all material, labour and t&p etc for proper completion of work. csi no. 11.07 21 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand ( 1:6 ) , minimum thickness not to be less then 10 mm including supply of all material, labour and t&p etc for proper completion of work. csi no. 11.09 22 add for extra labour and materials for plaster over rough face ofone brick thick wall.csi no. 11.12 23 s / mixing approved water proofing compound ( cico, dr fixit etc ) in cementmortar in plaster or concrete work in the proportion as recommended by the manufacturer. csi no. 11.15 24 making drip coarse ( 25x12 ) mm in 1:2 cement and coarse sandincluding supply of all materials, labour and t&p etc requiredfor proper completion of work. csi no. 11.19 25 3 mm thick floating coat of neat cement finish including supply of all materials, labour and t&p etc. required for proper completion of the work. ( cement consumption 0.044 bag / sq.m. ) csi no. 11.20 26 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and t&p etc, required for proper completion of the work. without base cc csi no. 12.04 27 first class bricks on edge floor laid dry, joints sand filled, including preparation of base to proper slope and its rammingincluding supply of all material labour & t&p etc. required forproper completion of the work.csi no. 12.07 28 supply and laying 8 mm thickglazed floor tiles of somany, johnson or equivalent make, , laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and t&p etc. required for proper completion of the work. csi no. 12.11 29 providing and fixing glass strips of 3.15 mm thickness & 40mm depth in jointsof floor and skirting at the time of laying floors, flush withfloor level including supply of all materials, labour& t&p etc. required for proper completion of work. csi no. 12.14 30 providing and laying floor of 8 mm thick vitrifiedtiles in flooring or skirting of approved brand ( bell, johnson or equi. make ) size of 600x600 mmof approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of tile including cost of all material, labour and t&p required for proper completion of the work csi no. 12.18 31 supply of 80 mm thick i shaped mechanically compressed inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200x ( 160+120 mm ) with minimum 5 mm thick toping of o.p.cement mixed with 25% marble powder. the compressive strength of concrete pavers blocks shall not be less than 30 mpa & 4.5 kg / no. including cost of all material, labour, t&p etc. required for proper completion of work as directed by engineer-in-charge but excluding g.s.t. which shall be paid extra as per rules csi no. 12.23 32 painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint luxol or equivalent brand or varnish including supply of all materials, labour and t&p etc. required for proper completion of the work. paint to be used should conform to the i.s. 103-1950. csi no. 13.01 33 same as in item no. 32 above but for every coat after ist coat. csi no. 13.02 34 same as in item 32 above but for every coat on previously painted old wood or iron work as required, for proper completion of work. csi no. 13.03 35 one priming coat and one coat oil bound acrelic distemper on new work including supply of all materials, labour and t&p etc. required for proper completion of the work.csi no. 13.08 36 same as in item 35 but for every coat after the first coat. csi no. 13.09 37 same as in item 35 but for every coat on previously old oil bound distempered surface. csi no. 13.10 38 finishing walls with water proof cement paint of approved make like super snowcem / ace or equivalent quality on new work with two coats to give an even shade including supply of all materials, labour etc. required for proper completion of work. csi 13.17 39 same as in item no. 38 but for each coat of water proof cement paint / ace after the first two coats to give an even shade. csi 13.18 40 same as in item no. 38 but for each coat of water proof cement paint. on previously treated surface csi 13.19 41 applying birla putty or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ici or equivalent brand for smoothening and levelling of the surface as per requirement and direction of engineer i / c including cost of all material, labour, t & p etc required for proper completion of work. csi no. 13.20. 42 applying birla putty or equivalent putty on previousaly painted surface for smoothining and leveling of the surface as per requirement and direction of e / i including cost of all material , labour and t&p required for proper completion of work. csi no. 13.21. 43 painting one coat with apex or equivalent brand weather coat paint on new wall surfaces ( well prepared with birla putty and one coat of primer ici or equivalent which shall be paid separately ) including through washing with water including cost of all materials, labour, t&p required for proper completion of work. csi no. 13.22 44 same as in item no 43 above but for every coat of additional apex or equivalent brand weather coat paint . csi no. 13.23 45 same as in item 43 but for each coat ofapex or equivalent brand weather coat paint .on previously treated surface.csi no. 13.24 46 dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the engineer-in-charge within a distance of 60 metres. csi no. 15.01 47 dismantling reinforced cement concrete or reinforced brick work or cement.concrete. including stacking of dismantled material as directed by the engineer-in-charge within a distance of 60 metres. csi no. 15.03 48 dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the engineer in-charge within a distance of 60 metres. csi no. 15.05 49 dismantling existing plaster including disposal of refuse as directed by the engineer-i / c within a distance of 60 m.csi no. 15.11 50 scrapping old white or colour wash or distemper including disposal of refuseas directed by the engineer-i / c within a distance of 60 mcsi no 15.12 51 drilling for 150 mm dia bore from g.l. to m b.g.l., work to be completed as per direction of engineer i / c . csi no 19.04h ( i ) 52 providing110mm dia plain pvc casing pipes ( aroma / supreme ) ( pressure10 kg. / sqcm. ) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and t&p required for assembly making and proper completion of work.. csi no 19.08 53 providing 110mm dia slotted pvc casing pipes ( aroma / supreme ) ( pressure10 kg. / sqcm. ) for making tubewell assembly and cartage to boring site, including cost of all labour, materials and t&p required for assembly making and proper completion of work.csi no 19.10 54 supply and fixing of pvc top plug of heavy qualityincluding all labour material & t&p. csi no 19.20 ( b ) 55 supply and stacking pee gravelproperly at levelled ground for measurement as directed by engineer i / c, including all labour, t&p required for proper completion of work.csi no 19.25 56 supply & installation of electrical control panel of l&t / havells or equivalent make for 1.5 / 2.0 h.p. submersible pump / pumpset containing contractor relay condenser. csi no 19.31 ( b ) 57 supply & installation of1.5 hp outlet 40mm dia. or more, head 71 / 36, discharge 2000 / 6000 lph submersible pump of k.s.b / calama. or eqt. make including cost of labour, t&p and material required for completion of work. csi no 19.32 ( b ) 58 supply and fixing of 2.5 mm2 for pumpabove 1 hp and up to 3 hp submersible cable havelsor equivalent make, for submersible pump complete in all respectcsi no 19.33 ( b ) 59 supply & fixing of steel wire rope forsubmersible pump including cost of labour, t&p and material required for completion of work. csi no 19.34 60 wiring point for light with 1.5 sq. mm. fr pvc insulated multistrand single copper conductor cable in pvc conduit pipe concealed in the wall, 14 swg copper pvc coated earth continuity wire, and approved quality, piano type switch ceiling rose / angle / batten holder as per approved sample on 3mm thick phenolic laminated bakelite sheet etc. of matching shade with wall colour complete in all respect csi no uppwd 131 ( c ) 61 wiring point for fan / fresh air fan ( light duty exhaust fan ) 1.5 sq. mm fr pvc insulated multistrand single core copper conductor cable pvc conduit pipe concealed in the wall, 14 swg copperearth continuity wire and approved quality, piano type switch & ceiling rose as per approved sample on 3mm thick phenolic laminated backelite sheet etc. of matching shade with wall colour complete in all respects as per direction of e / i. csi no uppwd 133 ( c ) 62 wiring point for plug with 1.5 sq. mm fr pvc insulated multistrand single core copper conductor cable in pvc conduit pipe concealed in the wall 14 swg copper earth continuity wire and approved quality type switch and socket as per approved sample etc. of matching shade with wall colour complete in all repects as per direction of e / i. csi no uppwd 134 ( c ) 63 supply and fixing of power plug with 15a / 240v v flush type switch and 5 pin 15a / 250v flush type universal socket in suitable m.s. box of 175mmx 100mmx50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. csi no uppwd 1139 64 supply and fixing of electronic fan regulator ( modular ) 120-280 v. isi marked, on the existing switch board including making connections, required material, labour t&p etc. for proper completion of work to the satisfaction of engineer in charge of work.. csi no uppwd 1203 ( c ) 65 supply and wiring of submain with two numbers 4 sq. mm fr pvc insulated 1100 v grade multistand single core copper conductor cable in 25 mm dia heavy duty ( 2 mm thick ) pvc conduit concealed in wall complete with 1 number 2.5 sq. mm fr pvc insulated multistand copper conductor cable as earth continuity wire etc. complete in all respects. csi no uppwd 216 ( c ) 66 s / f 6 amp. to 32 amp. “c” series mcb 9 ka / 10 ka ( havells / mds make ) csi no uppwd 1002 ( b ) 67 s / f surface / flush mounting 8 ways spn distribution board without mcb complete in all respect as per direction of e / i. csi no uppwd 1024 ( b ) 68 s / f 63 amp. s.p. isolator of approved make and as per sample approved by e / i. csi no uppwd 1004 ( b ) 69 supply and fixing of led tube light with batten suitable for up to 1 x 22 watt led tube light complete including tube etc on surface complete in all respect. csi no uppwd 1413 70 renewing panes of 4.8 to 5.7 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&p etc. required for proper completion of the work. ( a ) glass of 4 mm thick. csi no 20.04 ( i ) 71 supply and laying 1.5sq.mm gauge copper wire of plaza orequivalent make of approved quality including connecting withexisting wiring in existingp.v.c.pipe. including allmaterials, labour and t&p complete. csi no 22.06 ( a ) 72 supply and laying 2.5sq.mm gauge copper wire of plaza orequivalent make of approved quality including connecting withexisting wiring in existingp.v.c.pipe. including allmaterials, labour and t&p complete. csi no 22.06 ( b ) 73 supply and laying 4.0sq.mm gauge copper wire of plaza orequivalent make of approved quality including connecting withexisting wiring in existingp.v.c.pipe. including allmaterials, labour and t&p complete. csi no 22.06 ( c ) 74 supply and laying 6.0sq.mm gauge copper wire of plaza orequivalent make of approved quality including connecting withexisting wiring in existingp.v.c.pipe. including allmaterials, labour and t&p complete. csi no 22.06 ( d ) 75 providing and fixing 15mm dia b-class ( tata, jindal ) isi marked g.i. pipe complete with g.i. specials as bends, tee, socket cross, clamps, etc. earth work including filling the trenches etc. required for proper completion of the work. the rate also includes concealed g.i. fitting where required, cutting and making good the walls etc. including cost of all materials, labour tandp etc complete ( internal work ) . csi no 26.01 ( a ) 76 providing and fixing 20mm dia b-class ( tata / jindal hisar make ) isi marked g.i. pipe complete with g.i. specials as bends, tee, socket cross, clamps, etc. earth work including filling the trenches etc. required for proper completion of the work. the rate also includes concealed g.i. fitting where required, cutting and making good the walls etc. including cost of all materials, labour tandp etc complete ( internal work ) . csi no 26.01 ( b ) 77 providing and fixing 25mm dia b-class ( tata / jindal hisar make ) isi marked g.i. pipe complete with g.i. specials as bends, tee, socket cross, clamps, etc. earth work including filling the trenches etc. required for proper completion of the work. the rate also includes concealed g.i. fitting where required, cutting and making good the walls etc. including cost of all materials, labour tandp etc complete ( internal work ) . csi no 26.01 ( c ) 78 providing and fixing 32 mm dia jindal, jtc, isi marked g.i. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes external gi fitting where required, cutting and making good the walls etc and all materials, labour and t&p complete csi no 26.02 ( d ) 79 providing & fixing half turn 20mm dia gate valve, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no 26.05 ( b ) 80 providing & fixing half turn 25mm dia gate valve, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no 26.05 ( c ) 81 providing & fixing half turn 32mm dia gate valve, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work csi no 26.05 ( d ) 82 p / f gi unions nominal bore 20 mm, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no 26.10 ( b ) 83 p / f gi unions nominal bore 25 mm, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no 26.10 ( c ) 84 supply and fixing of syntex or equivalent make water storage tank including all materials, labours, t&p etc required for proper completion of work.csi no 26.12 85 providing and fixing of cp brass bib cock15 mm dia. heavy quality ( 400gm ) ( l & k and equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no 26.16 ( a ) 86 providing and fixing cp brass bib cock15 mm dia. heavy quality ( 200gm ) ( l & k and equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no 26.16 ( b ) 87 providing and fixing of cp brassstop cock 15 mm dia. heavy quality ( 400gm ) ( l & k and equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no 26.16 ( c ) 88 providing and fixing of cp brass bib cock 15 mm dia. heavy quality ( 200gm ) ( l & k and equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no 26.16 ( d ) 89 providing and fixing of cp brass angle valve heavy quality ( l&k or equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no 26.16 ( i ) 90 providing and fixing of cp brass piller cock heavy quality ( l&k or equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no 26.16 ( j ) 91 providing and fixing of concealed stop cock heavy quality ( l&k or equi. ) fittings, isi mark heavy quality including supply of all materials, labour and t&p required for proper completion of work. csi no 26.16 ( k ) 92 providing and fixing first quality white glazed orissa pattern w.c.pan hindustan, cera make. size 580 mm. ( hindustan, cera make ) with out p trapincluding supply of all materials, labour and t&p etc.complete csi no 27.01 93 providing and fixing first quality white glazed european type w.c.pan hindustan, cera make. size 580 mm. ( hindustan, cera make ) with out p trapincluding supply of all materials, labour and t&p etc.complete csi no 27.02 94 providing and fixing plastic seat covercomplete with plastic lid for european type wc isi markedincluding supply of all materials, labour and t&p etc.complete. csi no 27.04 95 providing and fixing flat back 430x370x340mm. size lipped front urinal basin of white glazed earthern ware first quality ( hindutan, neycer make ) i.s.i. marked including supply of all materials, labour and t&p etc. required for proper completion of the work. csi no 27.06 96 providing and fixing 450x300 mm wash hand basin of white glazed earthern ware first quality i.s.i. marked ( hindustan, neycer / cera make ) including supply of all materials, labour and t&p etc. required for proper completion of the work. csi no 27.10 97 providing and fixing 10 litres low level pvc flushing cistern, complete with all fittings including supply of all materials, labour and t&p etc. required for proper completion of the work. csi no 27.12 98 providing and fixing 600 mm x 450 mm beveled edge mirror of atul, kiran makeglass with indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with c.p. brass screws and washers including supply of all materials, labour and t&p etc.required for proper completion of the work. csi no 27.15 99 supply and fixing of 100 mm.pvc trap cp nahani trap india make of heavy approved quality complete with ci grating, includingsupply of all materials, labour and t&p etc. required for proper completion of the work. csi no 27.21 ( b ) 100 providing and laying of 75 mm dia. swr, pvc ( finolex or equivalent ) pipe including cost of excavation, c.c etc including its jointing and connection, all materials, labour and t&p etc. required for proper completion of the work. csi no 27.29 ( a ) 101 providing and laying of 90 mm dia. swr, pvc ( finolex or equivalent ) pipe including cost of excavation, c.c etc including its jointing and connection, all materials, labour and t&p etc. required for proper completion of the work. csi no 27.29 ( b ) 102 providing and laying of 110 mm dia. swr, pvc ( finolex or equivalent ) pipe including cost of excavation, c.c etc including its jointing and connection, all materials, labour and t&p etc. required for proper completion of the work. csi no 27.29 ( c ) 103 providing services of beldar for misc.works at site.rate=325+10%c.p.=358.00 csi no. 1.02 104 boring with 150 mm dia casing pipe to a probable depth of 50m from ground level with skilled and unskilled labour including all tandp boring apparatus supervision charges etc. required for proper completion of the work. old schedule csi no. 19.41 105 extraction of casing pipe 150mm. dia after completion of lowering of pipe assembly including all labour and tandp etc. complete.. old schedule csi no. 19.42 106 providing and fixing 20 mm dia chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 mspacing. this includes jointings of pipes & fittings with one step cpvc solvent cement andthe cost of cutting chases and making the same including testing of joints complete as per direction of engineer in charge.concealed work, including cutting chases and making good the walls etc. old schedule csi no. 24a.02 ( a ) 107 providing and fixing 32 mm dia chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 mspacing. this includes jointings of pipes & fittings with one step cpvc solvent cement andthe cost of cutting chases and making the same including testing of joints complete as per direction of engineer in charge.internal work - exposed on wall. old schedule csi no. 24a.01 ( c )