providing and supplying various type of materials for one school building at wadner bk , exacavation for foundation in earth, soil of all types, sand gravel and soft murum, including removing the excavated material up to a distance of 50m. beyond the building area and stacking and spreading as directed , dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. ( lift upto 1.5 .m ) bd.a.1 page no. 259 , exacavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. ( lift upto 1.50 m ) bd.a.2 page no.259 , providing dry / trap / granite / quartzite / gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. bd.a.12 page no.264 , providing and laying cast in situ / ready mix cement concrete in m-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mix plant ( pan mixer ) etc. complete. with natural sand / v.s.i. quality artificial sand bd. e. , providing and laying in situ / ready mix cement concrete m-20 of trap / granite / quartzite / gneiss metal for r.c.c.work in foundations like raft, strip foundations, grillage and footings of r.c.c.columns and steel stanchions etc. including bailing out water, formwork laying / pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided ( excluding reinforcement and structural steel ) etc. complete, with fully automatic micro processor based processor based plc with scada enabled reversible drum type mixer / concrete batch mix plant ( pan mixer ) etc. complete. with natural sand / v.s.i. quality artificial sand bd.f.3 page no.298 and b.7, page no. 38 , providing and laying cast in situ / ready mix cement concrete in m-10 of trap / granite / quartzite / gneiss metal for r.c.c columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying / pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, ( excluding reinforcement and structural steel ) . with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mix plant ( pan mixer ) etc. complete with natural sand / v.s.i. quality artificial sand bd.f.5 page no. 300and b.7, page no.38 , providing and laying cast in situ / ready mix cement concrete in m-10 of trap / granite / quartzite / gneiss metal for r.c.c. beams and lintels as per detailed desings and drawing or as directed including centering, formwork, cover blocks, laying / pumping compactionand roughening the surface if special finish is to be provided and curing etc. complete. ( excluding reinforcement and structural steel ) . with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mix plant ( pan mixer ) etc. with natural sand / v.s.i. quality artificial sand bd.f.6 page no. 300 and b.7, page no. 38 , providing and laying cast in situ / ready mix cement concrete in m-20 of trap / granite / quartzite / gneiss metal for r.c.c chajja as per detailed design and drawing including centering, formwork, cover blocks compacting , curing, finishing and roughening the surface if special finish is to be provided and curing complete. ( excluding reinforcement and structural steel ) . with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mix plant ( pan mixer ) etc. complete. with natural sand / v. s. i. quality artificial sand bd.f.9 page no. 303 and b.7, page no.38 , providing and laying cast in situ / ready mix cement concrete in m-10 of trap / granite / quartzite / gneiss metal for r.c.c. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying / pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, ( excluding reinforcement and structural steel ) . with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mix plant ( pan mixer ) etc. complete. with natural sand / v. s. i. quality artificial sand bd.f.8 page no. 302 and b.7, page no.38 , providing and fixing in position tmt - fe - 500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircasem newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and scheduled. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. bd.f.17, page no.306 , provinding second class burnt brick masonry with conventional / i.s. type bricks in cement mortal 1:6 in foundations and plinth of inner walls / in plinth external walls including bailing our water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. complete.bd.g.1 page no. , filling the plinth and floors with contractors material / brought from outside and approved by engineer incharge in layers of 15 cm to 20 cm including watering and comaction etc. complete. bd.a.11 page no.263 , provinding second class burnt brick masonry with conventional / i.s. type bricks in cement mortal 1:6 in superstructure including striking joints , raking out joints , watering and scaffolding etc. complete.bd.g.5 page no. 315 , providing internal cement plaster 6 mm thick in single coat in cement mortar 1:4 with neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. bd.l.1 page no. 367 , providing internal cement plaster 12 mm thick in single coat in cement mortar 1:4 with neeru finish to concrete or brick surfaces in all positions including scaffolding and curing etc. complete. bd.l.2 page no. 368 , provide sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 , thick in cement , mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of type base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. spec. no.:bd.l.7 , providing and laying polished shahabad stone flooring 25mm to 30 mm thick and required width in plain / diamond pattern on a bed of 1:6 c.m. including cement float, fillings joints with neat cement slurry, curing polishing and cleaning etc. complete. bd.m.3 page no.380 , providing sillls of polished kadappa stone 25 mm to 30 mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. bd.dm.29 page no.391 , providing and laying machine cut machine polished shahabad stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curring, polishing and cleaning etc. complete. , providing and fixing solid core flush door shuttercommercial in single leaf 30 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel. hinges and cromium plated fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. spec. no.: bd-t-36, page no. 500 , providing and fixing 50 mm x 50 mm mild steel sqaure pipe framed steel windows of various sizes as per details with welded squre bars 12 mm at 10 cm center to center without hot dip zinc coating without with ventilator including fabrication, glazing with plan / obscured glass panes 5 mm thick of approved type and quality, all fixtures and fastenings and finishing with one coat of primer complete . as directed by engineer in charge. , providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including sxaffolding if necessary, cleaning and prepaing the surface, watering for two days etc. complete. spec.no.: bd.o.8 / page no.406 , providing and applying washable oil-bound distemper of approved colour and shade to oldandnew surfacesin two coatsincluding scaffolding, prepaing the surface. ( excluding the primar coat. ) etc. complete. spec.no.: bd.p.5 page no.413 , providing and fixing steel frame door. of angle 50 x 50x 6 mm with mild steel bars 16 mm dia. horizontally at 10 mm c / c for ventilator portion including iron hold fast boxes for fixing shutters including welding, finishing, painting etc. complete. , providing and applying two coats of lead / zinc base oil paint / bitaminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete. ( excluding primer coat ) . , providing water proof bedding for flooring of bath and wc 25 mm thick in c.m. 1:3 including using approved water proofing compound in specified proportion as per manufactures specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fees stamp paper of rs.500 / - including ponding test etc. complete. , providing and fixing mild steel grill railing 15 kg / sq.m with ghanateakwood hand rail of size 75mm x 60 mm and still of 75mm x 25 mm and newel posts for staircases, including fabricating, fixtures, erecting, painting the grill work with one coat of anticorrosive paint of the grill work with one coat of anticorrosive paint and two coats of oil painting with approved colours and polishing the sill, hand rail and the newel post with french polish. , providing and fixing board displaying information, such as name of work, tender cost, name of contractor, work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge ( 1.25mm ) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on m.s.angle of size 35 x 35 x 3 mm frame with properly cross braced m.s. angles of size 35mmx35mmx3mm duly painted including two m.s. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. spec. no. as directed by engineer in charge , material testing charges