providing and supplying various type of materials at village shahajapur for constructing of concrete road-1.01 item no. 1: excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. 1.02 item no. 2: supplying trap / granite / quartzite / gneiss stone metal of required size by bringing the boulders / rubble at the road side breaking them to required gradation including conveying the boulders / rubble and stacking the broken metal etc. complete. ( prior approval of sample stacking the broken metal by the ex. engineer is necessary the date of approval will from part of the measurments ) a ) 40mm metal, by breaking boulders ( hand broken ) . 1.03 item no. 3: supplying hard murum / kankar at the road site, including conveying and stacking complete. 1.04 item no. 4: spreading 80 / 40 mm metal for road work including sectionong etc complete as directed by engineer in charge. 1.05 item no. 5: spreading hard murum / soft murum / gravel or kankar for side width complete. 2 item no. 6: compacting the sub grade / gravel / over size metal ( 200 mm loose ) layers for all width with power roller having weight 8 to 10 mt including necessary, labour, materials and artificial watering complete. 3 item no. 7: providing and laying cast in situ / ready mix cement concrete in m-10 pf trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mix plant ( pan mixer ) etc. complete. with fine aggregate ( natural sand / crushed sand vsi grade finely washed etc ) 4 item no. 8: providing and laying in situ cement concrete m20 with tremix treatment for 100mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. 5 item no. 9: providing and fixing board displaying information, such as name of work, tender cost, name of contractor, work completion and liability period etc, having rectangular shape of 1.20m* 0.90m size made out 18 guage ( 1.25mm ) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on m.s. angle of size 35*35*3 mm frame with properly cross braced m.s. angles of size 35mm*35mm*3mm duly painted including two m.s. angle iron posts of size 65mm*65mm*6mm, 3.65m 6 item no. 10: material testing charges - 40mm metal -1. crushing value / compressive stregth water absorption, specific gravity. 7 item no. 11: sand - 1. fineness modulus ( sieve analysis ) , silt and clay content.