tender for civil work-imp. dev of lane from h.no. 8/1 to h.no. 8/10 by pdg. rmc in indira vikas colony ward no. 13 mukherjee nagar/clz., dsr dar civil-2018 and approved items; 1 civil work 2 15.2.1:demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in-charge.nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 3 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar 4 6.1.2:brick work with common burnt clay f.p.s (non modular) bricks of class designation 7.5 in foundation and plinth in:cement mortar 1:6 (1 cement : 6 coarse sand) 5 13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) 6 13.18:neat cement punning 7 12.23.1.1:providing sand stone slab for roofing and laying them in cement mortar 1:4 ( 1 cement : 4 coarse sand) over wooden karries or rcc battens or structural steel sections ( karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 ( 1 cement : 3 fine sand ) complete:red sand stone salb40 to 50 mm thick 8 5.1.2:providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 9 5.22.6:steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more 10 19.19.4.1:providing and fixing in position pre-cast r.c.c. manhole cover and frame of required shape and approved quality.ehd - 35circular shape 560 mm internal dia 11 19.26.4:raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (raising depth of manhole to be paid separately :circular manhole 140 cm dia with circular cover 600 mm dia of grade ehd - 35 12 16.64:providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc.complete as per direction of engineer-in- charge. 13 16.75:providing and laying c.c. pavement of mix m-25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of engineer-in-charge. (the panel shuttering work shall be paid for separately). (note:- cement content considered in this item is @ 330 kg/cum. excess/less cement used as per design mix is payable/ recoverable separately). 14 5.28:providing and fixing in position 12mm thick bitumen impregnated fiber board conforming to is: 1838, including cost of primer, sealing compound grade-a in expansion joints. 15 110.12:p/f precast r.c.c. stab/grating 70mm thick manufactured with cc 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) reinforced with 96 kg/m3 of r.c.c including lapping all four side with m.s. sheet 1.6 mm thick & fixing in position complete. (drain covers with or without holes) 16 110.10:providing and fiving name board made of ms sheet 90x60cm, 1mm thick with frame of ms angle 50x50x6mm, two diagonal braces at the back of the sheet of ms flat 40x6mm, total height of the board above ground level 2.40m, length of legs below ground 0.30m embedded in cc block 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) 30x30x45cm including excavation and removal of surplus earth with in 50m lead, applying priming coat of approved steel primer, painting with synthetic enamel paint of approved quality and lettering with enamel paint of approved colour (one side) as per drawing/direction of engineer-in-charge 17 1.1.1_08:disposal of materials by mechanical transportincluding loading ,unloading and stacking lime ,moorum, buildingrubbish for lead 8 km