View Bid Results For Unloading Of Material Tenders

We found 10000 Bid Results related to unloading of material tenders. You can find Contractor details who won unloading of material tenders along with contract details in Bid awards announcements section.

Filters
Stage
8967
3214
3196
Tender Publishing Platform
563
14814
State / UT
36
5281
3497
1273
1150
576
410
387
382
331
291
259
254
250
228
110
106
94
86
72
62
47
42
42
26
24
18
14
14
9
9
9
8
7
5
3
1
Contract Value
6886
4386
3267
812
Publish Date
66
10
0
0
0
Sector
32
4130
2857
2834
1349
831
496
477
405
354
325
208
191
159
136
110
107
66
58
52
29
28
27
24
21
19
17
16
15
14
13
8
1
Ownership
7
7000
5870
2123
267
95
15
7
Within keyword
Active filters:
Showing 1–50 of 10000 tenders matching your filters
1.
Rural Development #11484311 AOC
Tender For Construction Of 01 No. D Type quarter At Phc Paiksahi- Earth work in excavation of foundation in hard soil or gravelly soil within 50 m initial loead and initieal lift, including dressing and levelling the bed etc. complete 2 Supplying and filling foundation and plinth with sand wall watered and rammed with cost conveyance and royality, taxes of all materials and labour (T&P) etc. complete. 3 Cement Concrete (1:3:6) in Foundation using 4 cm size bhg metal including watering, curing with cost, conveyance, royalty and taxes of all materials and cost of all labour (T&P) etc. complete as per the direction of Engineer-in-Charge. 4 Fly Ash Brick masonry with CM (1:6) in Foundation & Plinth including watering, curing with cost, conveyance, royalty and taxes of all materials & labour (T&P) etc. complete as per the direction of Engineer-in-Charge. 5 Fly Ash Brick masonry with C.M. (1:6) in Superstructure using Fly Ash Bricks including watering and curing with cost, conveyance, royalty and all taxes of materials and labour (T&P) required for the work etc. complete as per direction of Engineer-in-Charge. 6 Ground floor 7 First floor 8 16 mm (5/8) thick cement plaster (1:6) over brick walls finished smooth including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. 9 Ground floor 10 First floor 11 12mm thick C.P. (1:6) over brick walls finished smooth including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. 12 Ground floor 13 First floor 14 R.C.C. M-25 using 20 mm & down size b.h.g.c.b chips including watering, curing with cost, conveyance, taxes and cost of all labour (T&P) etc. complete as per the direction of Engineer-in-Charge. 15 A) Column Base 16 B) Plinth Band 17 Column / Beam 18 Ground Floor 19 1st Floor 20 Lintel 21 Ground Floor 22 First floor 23 Chajja 24 Ground Floor 25 First floor 26 R.C.C. at Window Sill Level 27 R.C.C. Shelves 28 Stair Case 29 Roof Slab 30 Cutting, Bending, binding and tying the grills and placing in position including cost, conveyance, taxes of all materials and cost of all labour (T&P) etc. complete as per the direction of Engineer-in-Charge. 31 Ground Floor 32 First Floor 33 Supplying, fitting, fixing of Vetrified tile flooring on 20mm thick bed of C.M. (1:4) jointed with neat cement slurry & pigment to match the shade including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. 34 Supplying, fitting, fixing of Vetrified tile in dados on 12mm thick C.P. (1:3) jointed with neat cement slurry & pigment to match the shade including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. 35 Supplying, fitting, fixing of Ceramic Glazed Wall tile in walls on 12mm thick C.P. (1:3) jointed with neat cement slurry & pigment to match the shade including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. 36 Providing, supplying and fitting and fixing of M.S. Door / Window shutters, gates & M.S. grills as per approved design etc. complete. 37 Labour for fitting, fixing of M.S. Door / Window shutters, grill gates etc. including cost of all labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. 38 Supplying, fitting, fixing of WPC Door Frames with Rebate Cuts and Finished cross section size 75mmx45mm or 90mm x 50mm including cost, conveyance of all materials and labour etc. complete as per the direction of Engineer-in-Charge. 39 Providing and fixing of 30mm thick Flush Door Shutters conforming to IS:2002 (Part-I) decorative type, core of block board construction with frame of 1st class hard wood and and well matched teak 3 ply veneering with vertical grains or cross bands and face vineers on both face of shutters inclusive of 4 Nos. of Stainless steel Butt Hinges (100mm x 60mm x 2.5mm) 40mm stainless steel screws, Cylindrical Lock (Godrej-9843), Tower Bolt SS 10 x 300mm (Bathroom) (Godrej 3264), PVC Door Buffer with SS Screw, teak wood lipping around the edges & paste with 1.5mm thick laminate on both side of the flush door, etc. including cost of all materials, hardware fittings, cost of all labour, conveyance, loading, unloading, T&P, etc. complete as per the direction of Engineer-in-Charge. 40 Supplying, fitting, fixing up window/Door (sliding type) made up aluminum Section 151-154,151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc.complete as per direction of Engineer-in charge. 41 Structural Steel work riveted, bolted or welded in built-up section, trusses and framed work including cutting, hoisting fixing in position and applying a primer coat of approved steel primer etc. complete. 42 Supplying, fitting, fixing of Bhusan colour sheets 0.50mm in roofing including drilling holes in wind ties and fixing with J or L hooks, fixing of ridges, valleys, wind ties etc. including cost, conveyance and taxes of all materials and labour, T&P etc. as required for the work complete as per the direction of the Engineer-in-Charge. 43 Applying Acrylic Wall Putty (Water Based) to wall surface including cost of all materials and labour (T&P) etc. complete as per the direction of Engineer-in-Charge. 44 Ground Floor 45 First Floor 46 Distempering two coats to walls with distemper of approved shade on new work to give an even shade including cost of distemper etc. complete as per specification and direction of the Engineer-in-charge. 47 Ground Floor 48 First Floor 49 Finishing out side wall surface with Weather Coat (I.S.I) two coats over a coat of primer with any approved shade including cost of all materials and labour (T&P) etc. complete as per the direction of Engineer-in-Charge. 50 Ground Floor 51 First Floor 52 Painting two coats to doors & windows etc. with any approved paints including cost, conveyace of all materials and labour (T&P) etc. complete as per the direction of Engineer-in-Charge. 53 Ground Floor 54 First Floor 55 Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete as per the direction of Engineer-in-Charge. Please Enable Macros to View BoQ information
Contract Date: Jul 01, 2026 Contract Value : 26.97 Lakh
Government Departments No of Bidders 9
2.
Public Administrative Department #11483312 AOC
Tender For Asphalting Of Road At Dattatray Nagar In P. No. 30 - Excavationforroadwayinearth,soilofallsorts,sand,gravelorsoft murum includingdressingsectiontotherequiredgrade,camberand sideslopesandconveyingthe excavatedmaterials with all lifts upto a leadof50m.andspreadingforembankmentorstackingas directed. 2 Providing, laying, spreading and compacting stone aggregates of specific sizestowaterboundmacadamspecificationincludingspreadingin uniform thickness, hand packing to propergradeandcamber, applying and brooming requisite type of screening/ binding Materials to fillupthe intersticesofcoarseaggregate,wateringandcompacting with Vibratory roller. to the requireddensity.ByMechanicalMeans- GradingI(UsingScreening TypeA(13.2)mm Aggregate) 3 Providingandconstructing75mm.thickModified Penetraction Macadam(MPM) roadsurfaceincludingallmaterials,preparingthe existing road surface, spreading 40 mm. stone layers metal 100%crusher brokenmetalwithconicalcrusherplant, heatingandsprayingthe bitumen of specified grade @ 2Kilogram/ Square Metre , spreading 12mm.sizechips compacting withthree wheelstaticrollerhaving weight8to 10MT.to achive the desired degreeofcompactionasper Technical Specification Clause 506 etc.complete, includingapplying tack coat of specified grade of bitumen at the rate of 0.30KilogramSquare Metre. on existing bitumen surface. (VG-30 bulk bitumen rates are considered to arrive at rates) 4 Providing and applying tack coat on the prepared surface heating byfamesinBoilerand sprayingbitumensetfootedinbitumenboller on B.T. surface2.5 Kilogram/10 SquareMetre.(VG-30bulkbitumen rates are considered to arrive at rates) 5 BITUMINOUS MACADAM:--Providing and laying bituminous macadam usingcrushed aggregate of Grading 1, premixed with bituminous binder, transportedatsite withVTS,laidover a previously prepared surface , finished to the required grade ,level, alignment,and rolling to achieve thedesireddensityfor80/100mmcompactedthicknesswithdrummix type hot mix plant with SCADA having complying essential features of Hot mixplantasperIRC-27 2009 specified conditions and attachments such as electronic load sensor based belt conveyers,automatic synchronizationofbitumenandaggregatefedder,builtindustcontroller systemandPLCforDrumMixplant,Sensorpaver,andVibratoryroller excludingprime/Tackcoat etc. complete --Bitumen 3.30% of specifiedgrade(VG-30 bulkbitumen ratesare considered to arrive at rates) 6 BITUMINOUS CONCRETE:--Providing and laying bituminous concrete usingcrushed aggregate of grading 1,premixed with bituminous binder @5.40%byweightoftotalmixandfiller,transported atsitewith VTS, laid overa previouslypreparedsurface,finishedtothe required grade ,level, alignment, and rolling to achieve the desired density for 50mm compacted thickness with drum mix plant with SCADA, Sensor paverandVibratoryrollerexcludingprime/Tackcoatetc.complete-- Bitumenofspecifiedgradewithstonedustfiller.(VG-30bulkbitumen rates are considered to arrive at rates) 7 TransportationofMaterialobtainedfromdebriesofvarioussortsincluding necessary excavation / loosing including loading,unloading and conveying and disposing as directed.e) For 5 KM
Contract Date: Jul 01, 2026 Contract Value : 6.64 Lakh
Local Bodies No of Bidders 2
Maharashtra View Result →
3.
Power #11480986 Price Bid
Tender for Replacement Of Damage/Defective Vcb Of 33 Kv Hospital Bay At 132 Kv Sub-Station, Bahraich, Providing And Fixing Of Various Material At 220 Kv Sub-Station, Bahraich & 132 Kv Sub-Station, Bhinga Under Etd Bahraich , Dismantling Of Damaged 36 Kv Vcb From 33 Kv Bay Including Opening Of Both Side Jumpers, Opening Of Cable Termination And Earthing Strips. This Work Also Includes Other Associated Work To Complete The Job Satisfactorily. , Safe Shifting Of Damaged 36 Kv Vcb And Other Materials From Work Site To Open Store A Directed By Engineer. , Modification Of Existing Foundation And Refabricating Of Auxiliary Structure Of Damaged 33 Kv Breaker As Per The Suitability Of New Breaker To Be Installed At 33 Kv Feeder. This Work Included Cutting And Bending Of Exiting Auxiliary Structure. Welding, Punching Holes In The Existing/ New Galvanized Angle Such That Modified Structure Should Be Able To Support The New Breaker. , Erection Of New 36 Kv Vcb On Existing Breaker Structure In Safe Way Including Modification Of Existing Structure And All Associated Work To Complete The Job Satisfactorily. , Jumpering Of New 36 Kv Vcb On Both Sides With 06 Nos. Panther Jumper If Requirement All Associated Work To Complete The Job Satisfactorily. , Cable Termination Of Vcb Including Ferrules, Cable Glands And All Associated Work To Complete The Job Along With Men, miscellaneous Consumable, T&P, Lug, Cable Gland, Ferrule Etc. Will Be Provided By Contractor At His Own Construction , Re-Earthing Of 36 Kv Circuit Breaker By Cutting Bending & Welding Of 50X6 Mm Ms Flat To Existing Riser Work Includes Checking Of Existing Nser Connectivity To Earthmate Painting Of Existing Riser Earth Flat With One Coat Of Red Oxide And Two Coat Of Black/Bus Green Enamel Paint Of Standard Make After Cleaning Of Strip/Angle For Rust/Dust Fire Including Cost Of Men Material And T&P As Per Direction Of Supervising Engineer To Complete The Job Satisfactorily , Repairing Of Operating Mechanism Of Old Vcb Of Bay Including Travel Measurement Of Moving Rod, Checking Of C.B. Contact Continuity, Dismantling Of Tie Rod Assembly, Cleaning & Greasing Of Its All Roller Pins And Its Re-Assembly. Rectification Of Problem In Electrical Circuit Including Aux. Contact Block, Checking Of Auto Operation Of Spring Charging Motor, Setting Of Limit Switches, Measurement Of Contact Resistance Of All The Poles Using Contact Resistance Meter. Measurement Of Closing & Tripping Time Of All The Poles With Help Of Digital Time Measurement Equipment, Checking Of Healthiness Of The Vacuum Interrupter By Using Vacuum Interrupter Tester And Finally Checking Of Opening & Closing Operation Of The Circuit Breaker On Remote And Local. , Safe Loading, Carriage And Unloading Of 33 Kv Vcb By Truck/Private Vehicle & Hydra From 132 Kv Sub-Station, Bhinga Approx. 40 Km. , Providing And Fixing Of 33 Kv Vcb Vaccume Interepter Suitable For 1600 Amp. (Siemens Make Vcb) As Per Sample At 132 Kv Sub-Station, Bhinga , Providing And Fixing Of Abb Motor Gear Set Of 33 Kv Vcb As Per Sample At 220 Kv Sub-Station, Bahraich
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
4.
Rural Development #11480902 Price Bid
Tender For Supply Of Construction Material At Gp/Malegaon(Ta)/Zp/Ngp/Tender No1/2026-27/1St Call- 1 Item Wise Boq Boq_Ver3.0 Item Wise Normal Inr Only Inr Select, Excess (+), Less (-) Tender Inviting Authority: Sarpanch/Gramsevak Grampanchayat Malegaon(Ta), Panchayat Samiti Saoner, Dist Nagpur Name Of Work: Supply Of Construction Material For All Scheme At Gp Malegaon(Ta), Ta Saoner, Dist Nagpur Contract No: Zp/Ngp/Gp/Malegaon(Ta)/Supply Of Construction Material For All Scheme /Tender/ No1/2026-27 Prmdet Name Of The Bidder/ Bidding Firm / Company : Price Schedule(Domestic Tenders - Rates Are To Given In Rupees (Inr) Only)(This Boq Template Must Not Be Modified/Replaced By The Bidder And The Same Should Be Uploaded After Filling The Relevant Columns, Else The Bidder Is Liable To Be Rejected For This Tender. Bidders Are Allowed To Enter The Bidder Name And Values Only ) Number # Text # Text # Number # Text # Number Number Text Text # Number # Text# Text # Number # Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number # Number # Text Text Number # Number # Date Number # Number # Text # Sl.No. Item Code / Make Quantity Units Estimated Rate Inrs. P Addition / Deduction Addition / Deduction Values Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Basic Rate In Figures To Be Entered By The Bidder Inrs. P Excise Duty Amount In Inr Rs. P Gst Amount In Inr Rs. P Freight Charges ( Unloading & Stacking) Inrs. P Any Other Taxes Inrs. P Any Other Duties/Levies Inrs. P Iiird Party I.E Dgs&D / Rites Etc Inspection Charges @0.34%+Service Tax Less For Cenvat Credit,If Any Respect Of Supplies Under Full Excise Duty Category Total Amount Without Taxescol (13) = (4) X (7) Inrs. P Total Amount With Taxescol (14) = Sum (8) To (13) Inrs. P Total Amount In Words 2 Items : 3 Acc Cement 53 Gred ( I.S.I.) 4 Ultratech Cement 53 Gred ( I.S.I.) 5 Ambuja Cement 53 Gred ( I.S.I.) 6 Bricks (Red) 7 Bricks (Ash) 8 Bricks (Cement) 9 Gi Sheet 10 Sand Kanhan 11 Sand Black 12 Soft Murum 13 Hard Murum 14 Soil (Red) 15 Soil (Black) 16 Metal 10 Mm 17 Metal 20 Mm 18 Metal 40 Mm 19 Metal 60 Mm 20 Metal 80 Mm 21 Steel 6 Mm 22 Steel 8 Mm Tmt Fe 500 23 Steel 10 Mm Tmt Fe 500 24 Steel 12 Mm Tmt Fe 500 25 Steel 16 Mm Tmt Fe 500 26 Steel Gril Work 27 Kota Stone 28 Tiles Vetryfide (2*2 Fit) 29 Pelving Block Hydrolick Mode 30 Pelving Block Rubber Mode 31 Cement Paver Blocks 60 Mm 32 Rcc Cement Pipe 250 Mm 33 Rcc Cement Pipe 300 Mm 34 Rcc Cement Pipe 450 Mm 35 Rcc Cement Pipe 600 Mm 36 Rcc Cement Pipe 900 Mm 37 Centring Tar 38 Mixure Machine 39 Vibratar 40 Roller 41 Water Tanker 6000 Ltr Total In Figures 0.0 0.0 Inr Zero Only 4.0 Construction Of Chamber For 100Mm Sluice Plates Item5 10.0 Nos Quoted Rate In Figures Select % 0.0 0.0 Zero Only Quoted Rate In Words Inr Zero Only Please Enable Macros To View Boq Information
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
Contract Date: Ref. Documents Contract Value : 42.50 Lakh
Government Departments No of Bidders 1
7.
Rural Development #11474423 Technical Bid
Tender for Supply Of Construction Material For All Scheme At Gp Bhendala, Ta Saoner, Dist Nagpur , Item Wise Boq Boq_Ver3.0 Item Wise Normal Inr Only Inr Select, Excess (+), Less (-) Tender Inviting Authority: Sarpanch/Gramsevak Grampanchayat Bhendala, Panchayat Samiti Saoner, Dist Nagpur Name Of Work: Supply Of Construction Material For All Scheme At Gp Bhendala, Ta Saoner, Dist Nagpur Contract No: Zp/Ngp/Gp/Bhendala/Supply Of Construction Material For All Scheme /Tender/ No1/2026-27 Prmdet Name Of The Bidder/ Bidding Firm / Company : Price Schedule (Domestic Tenders - Rates Are To Given In Rupees (Inr) Only) (This Boq Template Must Not Be Modified/Replaced By The Bidder And The Same Should Be Uploaded After Filling The Relevant Columns, Else The Bidder Is Liable To Be Rejected For This Tender. Bidders Are Allowed To Enter The Bidder Name And Values Only ) Number # Text # Text # Number # Text # Number Number Text Text # Number # Text# Text # Number # Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number # Number # Text Text Number # Number # Date Number # Number # Text # Sl. No. Item Code / Make Quantity Units Estimated Rate In Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Basic Rate In Figures To Be Entered By The Bidder In Rs. P Excise Duty Amount In Inr Rs. P Gst Amount In Inr Rs. P Freight Charges ( Unloading & Stacking) In Rs. P Any Other Taxes In Rs. P Any Other Duties/Levies In Rs. P Iiird Party I.E Dgs&D / Rites Etc Inspection Charges @0.34%+Service Tax Less For Cenvat Credit,If Any Respect Of Supplies Under Full Excise Duty Category Total Amount Without Taxes Col (13) = (4) X (7) In Rs. P Total Amount With Taxes Col (14) = Sum (8) To (13) In Rs. P Total Amount In Words , Items : , Acc Cement 53 Gred ( I.S.I.) , Ultratech Cement 53 Gred ( I.S.I.) , Ambuja Cement 53 Gred ( I.S.I.) , Bricks (Red) , Bricks (Ash) , Bricks (Cement) , Gi Sheet , Sand Kanhan , Sand Black , Soft Murum , Hard Murum , Soil (Red) , Soil (Black) , Metal 10 Mm , Metal 20 Mm , Metal 40 Mm , Metal 60 Mm , Metal 80 Mm , Steel 6 Mm , Steel 8 Mm Tmt Fe 500 , Steel 10 Mm Tmt Fe 500 , Steel 12 Mm Tmt Fe 500 , Steel 16 Mm Tmt Fe 500 , Steel Gril Work , Kota Stone , Tiles Vetryfide (2*2 Fit) , Pelving Block Hydrolick Mode , Pelving Block Rubber Mode , Cement Paver Blocks 60 Mm , Reinforced Cement Concrete Cement Pipe 250 Mm , Reinforced Cement Concrete Cement Pipe 300 Mm , Reinforced Cement Concrete Cement Pipe 450 Mm , Reinforced Cement Concrete Cement Pipe 600 Mm , Reinforced Cement Concrete Cement Pipe 900 Mm , Centring Tar , Mixure Machine , Vibratar , Roller , Water Tanker 6000 Ltr Total In Figures 0.0 0.0 Inr Zero Only 4.0 Construction Of Chamber For 100Mm Sluice Plates Item5 10.0 Nos Quoted Rate In Figures Select % 0.0 0.0 Zero Only Quoted Rate In Words Inr Zero Only
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
8.
Rural Development #11474421 Technical Bid
Tender for Supply Of Construction Underground Drain Material For Thakkar Bappa Yojana At Gp Bhendala, Ta Saoner, Dist Nagpur , Item Wise Boq Boq_Ver3.0 Item Wise Normal Inr Only Inr Select, Excess (+), Less (-) Tender Inviting Authority: Sarpanch/Gramsevak Grampanchayat Bhendala, Panchayat Samiti Saoner, Dist Nagpur Name Of Work: Supply Of Construction Underground Drain Material For Thakkar Bappa Yojana At Gp Bhendala, Ta Saoner, Dist Nagpur Contract No: Zp/Ngp/Gp/Bhendala/Supply Of Construction Underground Drain Material For Thakkar Bappa Yojana /Tender/ No1/2026-27 Prmdet Name Of The Bidder/ Bidding Firm / Company : Price Schedule (Domestic Tenders - Rates Are To Given In Rupees (Inr) Only) (This Boq Template Must Not Be Modified/Replaced By The Bidder And The Same Should Be Uploaded After Filling The Relevant Columns, Else The Bidder Is Liable To Be Rejected For This Tender. Bidders Are Allowed To Enter The Bidder Name And Values Only ) Number # Text # Text # Number # Text # Number Number Text Text # Number # Text# Text # Number # Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number # Number # Text Text Number # Number # Date Number # Number # Text # Sl. No. Item Code / Make Quantity Units Estimated Rate In Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Basic Rate In Figures To Be Entered By The Bidder In Rs. P Excise Duty Amount In Inr Rs. P Gst Amount In Inr Rs. P Freight Charges ( Unloading & Stacking) In Rs. P Any Other Taxes In Rs. P Any Other Duties/Levies In Rs. P Iiird Party I.E Dgs&D / Rites Etc Inspection Charges @0.34%+Service Tax Less For Cenvat Credit,If Any Respect Of Supplies Under Full Excise Duty Category Total Amount Without Taxes Col (13) = (4) X (7) In Rs. P Total Amount With Taxes Col (14) = Sum (8) To (13) In Rs. P Total Amount In Words , Items : , Acc Cement 53 Gred ( I.S.I.) , Ultratech Cement 53 Gred ( I.S.I.) , Ambuja Cement 53 Gred ( I.S.I.) , Bricks (Red) , Bricks (Ash) , Bricks (Cement) , Gi Sheet , Sand Kanhan , Sand Black , Soft Murum , Hard Murum , Soil (Red) , Soil (Black) , Metal 10 Mm , Metal 20 Mm , Metal 40 Mm , Metal 60 Mm , Metal 80 Mm , Steel 6 Mm , Steel 8 Mm Tmt Fe 500 , Steel 10 Mm Tmt Fe 500 , Steel 12 Mm Tmt Fe 500 , Steel 16 Mm Tmt Fe 500 , Steel Gril Work , Reinforced Cement Concrete Cement Pipe 250 Mm , Reinforced Cement Concrete Cement Pipe 300 Mm , Reinforced Cement Concrete Cement Pipe 450 Mm , Reinforced Cement Concrete Cement Pipe 600 Mm , Reinforced Cement Concrete Cement Pipe 900 Mm , Centring Tar , Mixure Machine , Vibratar , Roller , Water Tanker 6000 Ltr Total In Figures 0.0 0.0 Inr Zero Only 4.0 Construction Of Chamber For 100Mm Sluice Plates Item5 10.0 Nos Quoted Rate In Figures Select % 0.0 0.0 Zero Only Quoted Rate In Words Inr Zero Only
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
9.
Power #11466147 Price Bid
Tender For Under 11 Kv & Lt Vertical, Bareilly Repair Work Under O&M Item For Damage Caused By Storm/Hurricane/Accident/Other Special Reasons. (Running Contract)=- 1 The Work Of Delivering Following Material From The Departmental Store Center To The Site In Which Includes Loading And Unloading On Both Sides. (Distance 0 To 50 Km) 2 Pcc Pole 11 Mtr. Long 3 Stp Pole 09 Mtr. Long 4 Pcc Pole 8.5 Mtr. Long 5 Acsr Weasel Conductor 6 Acsr Rabbit Conductor 7 Acsr Raccoon Conductor 8 A.B Cable (3X120 Sqmm) 9 A.B Cable (3X95 Sqmm) 10 A.B Cable (3X50 Sqmm) 11 11 Kv Cross Arm 12 11 Kv Pin Insulator With Pin 13 11 Kv Disc Insulator 14 11 Kv Disc Fitting 15 Stay Set Complete 16 Top Channel For 11 Kv 17 Guarding Angle For 11 Kv 18 T-Off Channel For 11 Kv 19 G.I Wire 20 Lt Distribution Box (03 Phase) 21 Complete Work Of Installing The Electrical Material Received From The Store Center At The Sites As Per Respo Norms. 22 Work Of Fixing/Installing Single Pole Of The Pcc Pole (8.5 Meter) Installed At The Site Support With Proper Alignment & Upto Depth Of One Sixth Of Length Of Pole With Proper Fabrication As Per Respo Standards. Which Includes Installation Of All Accessories Like Pin/Disk Insulator, Angle Channel Etc. And Decentralized Material Will Be Payable By The Contractor/Firm. 23 Work Of Fixing/Installing Double Pole Of The Pcc Pole (11 Meter) Installed At The Site Support With Proper Alignment & Upto Depth Of One Sixth Of Length Of Pole With Proper Fabrication As Per Respo Standards. Which Includes Installation Of All Accessories Like Pin/Disk Insulator, Angle Channel Etc. And Decentralized Material Will Be Payable By The Contractor/Firm. 24 Work Of Fixing/Installing Single Pole Of The Stp Pole(9/ Meter) Installed At The Site Support With Proper Alignment & Upto Depth Of One Sixth Of Length Of Pole With Proper Fabrication As Per Respo Standards. Which Includes Installation Of All Accessories Like Pin/Disk Insulator, Angle Channel Etc. And Decentralized Material Will Be Payable By The Contractor/Firm. 25 Complete Work Of Laying/Installing /Stringing Acsr Weasel Conductor On The Established Electric Poles Installed As Per Respo Norms. 26 Complete Work Of Laying/Installing /Stringing Acsr Rebit Conductor On The Established Electric Poles Installed As Per Respo Norms. 27 Complete Work Of Laying/Installing /Stringing Acsr Raccoon Conductor On The Established Electric Poles Installed As Per Respo Norms. 28 Stringing & Sagging Of Ab Cable (3X120) Sqmm. As Per Respo Norms . 29 Stringing & Sagging Of Ab Cable (3X95) Sqmm. As Per Respo Norms . 30 Stringing & Sagging Of Ab Cable (3X50) Sqmm. As Per Respo Norms . 31 Complete Work Of Re-Sagging / Tightening The Loose Line & Re-Height The Weasel/Rabit/ Racoon Conductor Line At The Site On The Established Electric Poles Installed As Per Respo Norms. 32 Fixing Of 11 Kv Cross Arm As Per Reso Norms . 33 Fixing Of 11 Kv Pin Insulator With Pin As Per Reso Norms . 34 Fixing Of 11 Kv Disc Insulator As Per Reso Norms . 35 Fixing Of 11 Kv Disc Fitting As Per Reso Norms . 36 Fixing Of T-Off Channel For 11 Kv As Per Reso Norms . 37 Fixing Of Top Channel For 11 Kv 38 Complete Work Of Installation Of Stay Set Complete With Concreting On Established Double Pole & Single Pole Of Line As Per The Respo Standards. 39 Complete Work Of Cutting And Pruning The Branches Of Trees Standing Between The Lt Line / 11 Kv Line/D.T/ ,D/Pole Installed And Shifting Place/Route. 40 Guarding Work Of 11 Kv Lines Including Work Mounting Of Guarding Angle And Stringing Of Guarding Wire After Binding Of String, Complete In All Respect Alongwith Providing And Fixing Of Eye Bolts . 41 Work Of Straightening Of Tilted St Poles And Work Of Repairing Of Damaged St Pole(9/11/13 Meter ) At The Bottom By Providing Fixing 03 Nos. Angel Pieces Of Size 50X506Mm Of 75 C.M. Alongwith Grouting With Plinth Of St Poles With 1:4:8 Mixture In Size (450X450X1500Mm.) Including Cost Of Cement/Bb & Sand Required As Per Respo Norms. 42 Chemical Earthing Of Distribution T/F As Per Respo Norms.( All Material Will Be Arranged By The Contractor At His Own Cost) 43 Installation Of Lt Distribution Box (03 Phase) Along With Making All Connections As Per Respo Norms. 44 Supply & Fixing Of Following Materials. 45 Al Lug ( 240 Mm2 Cable). 46 Al Lug ( 400 Mm2 Cable). 47 Al Lug ( 630 Mm2 Cable).
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 4
Uttar Pradesh View Result →
10.
Power #11466146 Price Bid
Tender For Repair Work Under O&M Head Of Damage Caused Due To Storm/Hurricane/Accident/Other Special Reasons Under 33 Kv Vertical, Bareilly. (Running Contract)=- 1 The Work Of Safe Carriage Of Following Materials From The Electricty Store Centre Cb Ganj, Bareilly To The Working Site Including Loading And Unloading At Both Ends. (Distance 0 To 50 Km) 2 Stp Pole 13 Mtr. Long 3 Stp Pole 11 Mtr. Long 4 Pcc Pole 11 Mtr. Long 5 Pcc Pole 9 Mtr. Long 6 Acsr Dog Conductor 7 Acsr Panther Conductor 8 33 Kv Cross Arm 9 33 Kv Pin Insulator With Pin 10 33 Kv Disc Insulator 11 33 Kv Disc Fitting 12 Stay Set Complete 13 Top Channel For 33 Kv 14 T-Off Channel For 33 Kv 15 33 Kv Xlpe Cable 3X300 Sqmm 16 11 Kv Xlpe Cable 3X185 Sqmm 17 11 Kv Xlpe Cable 3X120 Sqmm 18 Complete Work Of Installation/Replacement Of The Material Received From Electricty Store Centre Cb Ganj, Bareilly At The Working Sites As Per Respo Norms . 19 Work Of Installation/Replacement Of Single Stp Pole ( 13 Meter) With Proper Grouting Upto Depth Of One Sixth Of Length Of Pole And Mounting Of All Accessories Like Pin/Disc Insulator, Angle Channel, Cross Arm Etc.As Per Respo Standards And Decentralized Material Shall Be Provided By The Contractor/Firm. 20 Work Of Installation/Replacement Of Single Stp Pole ( 11 Meter) With Proper Grouting Upto Depth Of One Sixth Of Length Of Pole And Mounting Of All Accessories Like Pin/Disc Insulator, Angle Channel, Cross Arm Etc.As Per Respo Standards And Decentralized Material Shall Be Provided By The Contractor/Firm. 21 Work Of Installation/Replacement Of Single Pcc Pole ( 11 Meter) With Proper Grouting Upto Depth Of One Sixth Of Length Of Pole And Mounting Of All Accessories Like Pin/Disc Insulator, Angle Channel, Cross Arm Etc.As Per Respo Standards And Decentralized Material Shall Be Provided By The Contractor/Firm. 22 Work Of Installation/Replacement Of Single Pcc Pole (9 Meter) With Proper Grouting Upto Depth Of One Sixth Of Length Of Pole And Mounting Of All Accessories Like Pin/Disc Insulator, Angle Channel, Cross Arm Etc.As Per Respo Standards And Decentralized Material Shall Be Provided By The Contractor/Firm. 23 Complete Work Of Laying/Installing /Stringing Of Acsr Dog Conductor On The Installed Electric Poles As Per Respo Norms. 24 Complete Work Of Laying/Installing /Stringing Of Acsr Panthar Conductor On The Installed Electric Poles As Per Respo Norms. 25 Complete Work Of Laying/Installing /Stringing The 33 Kv Xlpe Cable (3X300 Sqmm) As Per Respo Norms. 26 Complete Work Of Laying/Installing /Stringing The 11 Kv Xlpe Cable(3X185 Sqmm) As Per Respo Norms. 27 Complete Work Of Laying/Installing /Stringing The 11 Kv Xlpe Cable(3X120 Sqmm) As Per Respo Norms. 28 Complete Work Of Re-Sagging / Tightening The Loose Line Of Dog Conductor Upto Proper Height On The Installed Electric Poles As Per Respo Norms. 29 Complete Work Of Re-Sagging / Tightening The Loose Line Of Panther Conductor Upto Proper Height On The Installed Electric Poles As Per Respo Norms. 30 Installation/Replacement Of 33 Kv Cross Arm As Per Respo Norms. 31 Installation/Replacement Of 33 Kv Pin Insulators With Pin As Per Respo Norms. 32 Installation/Replacement Of 33 Kv Disc Insulator As Per Respo Norms . 33 Installation/Replacement Of 33 Kv Disc Fitting As Per Respo Norms . 34 Installation/Replacement Of Top Channel For 33 Kv As Per Respo Norms . 35 Installation/Replacement Of T-Off Channel For 33 Kv As Per Respo Norms . 36 Complete Work Of Installation Of Stay Set Complete With Concreting On Installed Double / Single Pole Of Line As Per The Respo Standards. 37 Complete Work Of Cutting/ Pruning/ Trimming Of The Branches Of Trees For Making Proper Gap Between The 33 Kv Lines And Trees. 38 Work Of Straightening Of Tilted St Poles And Work Of Repairing Of Damaged St Pole (9/11/13 Meter ) At The Bottom By Providing Fixing 03 Nos. Angle Pieces Of Size 50X50X6 Mm Of 75 Cm Alongwith Grouting With Plinth Of St Poles With 1:4:8 Mixture In Size (450X450X1500Mm.) Including Cost Of Cement/Bb & Sand Required As Per Respo Norms. 39 Chemical Earthing Of T/F As Per Respo Norms.( All Material Shall Be Provided By The Contractor At His Own Cost) 40 Water Level Earthing Of T/F Body & Neutral With Gi Pipe Of 1.5\ Dia. Upto 60 Feet Depth Including G.I Strip Size 50X6 Mm. As Per Respo Norms. (Material Shall Be Provided By Contractor). 41 Supply & Fixing Of Following Materials. 42 Supply & Fixing Of Holding Clamps For All Sizes . 43 Supply & Fixing Of Copper Tinned Fuse Wire Of Size 12 Swg Appropriate Size 44 Supply & Fixing Of Copper Tinned Fuse Wire Of Size 16 Swg Appropriate Size 45 Supply & Fixing Of Nut & Bolt As Per Respo Standards 46 Supply & Fixing Of F-Clamp As Per Respo Standards 47 Supply & Fixing Of Pg Clamps Suitable For Dog Conductor 48 Supply & Fixing Of Pg Clamps Suitable For Panther Conductor 49 Safe Carriage Of Old & Used/ Damaged Material From Working Sites To Electricity Store Centre, Bareilly Including Loading And Unloading At Both Ends. 50 Line Material (Insulator, Disc, X-Arm, Angle, Channel Etc.) Old & Used/Damage 51 Stp Old & Used / Damage 52 Installation/ Replacement Of Defective 33 Kv Ct, 33 Kv Pt, 11 Kv Ct & 11 Kv Pt At 33/11 Kv Substations With Proper Wiring And Testing Including Safe Carriage Of New Ct, Pt From Electricity Store Centre Cb Ganj, Bareilly To 33/11 Kv Substations.
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 4
Uttar Pradesh View Result →
11.
Public Administrative Department #11466134 Price Bid
Tender for Earth Work In Excavation In Trenches For Foundation Pipe Cable Etc In Ordinary Soil Etc All Comp , Dismantaling Brick Work Or Stone Work In Lime Of Cement Mortar And Including Stocking Of Materials As Directed Etc All Comp , Dismantling Cement Concrete Or Brick Or Granolithic Floors Including Etc All Comp , Dismentaling Of Interlocking Tiles Etc All Comp , Laying Of Base Concrete 1:6:12 With Cement C.Sand & 40 Mm Brick Ballast Including Mat Lab T&P Etc All Comp , Centering And Shuttering Including Strutting Propping Etc All Comp , Reinforced Cement Concrete Works With Cement Approved Coarse Sand And 2 Cm (3/4) Gauge Approved Stone Ballast Etc All Comp , Mild Steel Or Iron In Plain Work Such As Reinforced Concrete Or Reinforced Brick Work Etc All Comp , Providing And Laying In Cement Concrete 4:2:1 Of Not Less Than Strength Of M 150 ( Stone Ballast 4 (20 Mm Normal Size):2 Approved Etc All Comp , Relaying Of 80 Mm Plain Cement Concrete Interlocking Tiles Et Call Comp , Sale Of Material To Contractor Old Brick Etc All completion , Sale Of Material To Contractor Brick Bats Etc All completion , Supply And Fixing Inogration Board With Paidestal And Granite Board Etc All Comp , Construction Of Granular Sub Base (Gsb) By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Etc All Comp , Cartage Of Earth Up To 3.00 Km Including Loading & Unloading But Excluding Stacking On Pucca Road Etc All Comp , Add 18% Gst
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
12.
Public Administrative Department #11466133 Price Bid
Tender for Desliting/Cleaning Of Open Service Lane Under Foul Position And Liquid Mud Etc All completion , Earth Work In Excavation In Trenches For Foundation Pipe Cable Etc All Comp , Earth Work In Cutting In Ordinary Soil Lead 30 Mt & Lift 1.5 Mtincl Lab T&P Etc All Comp , Class-150 Birck Work In 1:4 Cement & Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials Etc All Comp , Providing And Laying In Position Cement Concrete Of Specified Grade Exing The Cost Of Centering And Shuttering 1:6:12 (1 Cement:6 Coars Sand:12 Graded Brick Etc All completion , 12 Mm Thick Plaster In Single Coat On Fair Side Of Single Or Half Brick Wall For Interior Plastering Up To Floor Two Level Including Etc All completion , Centering And Shuttering Inculding Strutting Propping Etc All completion , Reinforced Cement Concrete Slab Work In Open Foundation 1:1.5:3 With Cement C-Sand & 20 Mm Stone Grit Ballast Including Shuttering Mat Lab Etc All Comp , M.S Or Tor Steel (12-16) Mm Dia Iron Work In Renforcement Cutting Bending And Binding Including Etc All completion , Providing And Laying In Cement Concrete 4:2:1 Of Not Less Than Strength Of M 150 ( Stone Ballast 4(20 Mm Normal Size) Etc All Comp , Construction Of Granular Sub Base (Gsb)By Providing Well Graded Material Spreading In Uniform Layers With Motor Grader On Prepared Surface Etc All completion , Providing And Laying Design Mix Cement Of M-30 Grade In Roads/Tax Tracks Runways Using Cement Etc All completion , Supply And Fixing Inogration Board With Paidestal And Granite Board Etc All completion , Disposal Of Earth Up To 3.00 Km Incliding Loading & Unloading Etc All Comp , Add 18% Gst
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
13.
Public Administrative Department #11466132 Price Bid
Tender for Dismentaling Of Interlocking Tiles Etc All Cmp , Sale Of Material To Contractor Old Interlocking Tiles Etc All Comp , Desilting/Cleaning Of Open Service Lane Under Foul Position Etc Call Comp , Making Bundha By Sand Filled Bag Including Cost Of Local Sand Empty Cement Bag Stretching Etc All Comp , Earth Work In Cutting In Ordinary Soil Lead 30 Mt & Lift 1.5 Mtincl Lab T&P Etc All Comp , Class-150 Brick Work In 1:4 Cement & Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials ,Labour And Tools And Plants Etc All Comp , 12 Mm Thick Plaster In Single Coat On Fair Side Of Single Or Half Brick Wall For Interior Plastering Up To Floor Two Level Including Etc All Comp , Centering And Shuttering Including Strutting Propping Etc All Comp , Reinforced Cement Concrete Works With Cement Approved Coarse Sand And 2 Cm (3/4) Gauge Approved Stone Ballast Etc All Comp , Mild Steel Or Iron In Plain Work Such As Reinforced Concrete Or Reinforced Brick Work Etc All Comp , Supply And Fixing Inogration Board With Paidestal And Granite Board Etc All Comp , Providing And Laying Design Mix Cement Of M-30 Grade In Roads/Tax Tracks Runways Using Etc All completion , Construction Of Granular Sub Base (Gsb) By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Etc All Comp , Diposal Of Earth Up To 3.00 Km Including Loading & Unloading But Excluding Stacking On Pucca Road Etc All Comp , Add 18% Gst
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
15.
Public Administrative Department #11466090 Price Bid
Tender for Dismentaling Of Interlocking Tiles Etc All Comp , Earth Work In Cutting In Ordinary Soil Lead 30 Mt & Lift 1.5 Mtincl Lab T&P Etc All , Earth Work In Ecxavation In Ordinary Soil Lead 30 Mt& Lift 1.5 Mtincl Lab T&P Etc All Comp , Laying Of Base Concrete 1:6:12 With Cement C.Sand & 40 Mm Brick Ballast Etc All Cmp , Laying , Spreading And Commpaction Of Local Screened Sand N Water Logged Location For Construction Of Road Embankment Including Etc All Comp , S/L/J Of 350 Mm Dia Reinforced Cement Concrete Hume/Sw Pipe With Standard Jointing Material Cement & Spun Yam In Mortar Of Cement @ C/Sand Including Etc All Comp , Class-150 Brick Work In 1:4 Cement & Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And Tools And Plants Etc All Comp , 12 Mm Thick Plaster In Single Coat On Fair Side Of Single Or Half Brick Wall For Interior Plastering Up To Floor Two Level Including Etc All Comp , Construction Of Gsb Granular Sub Base By Providing Well Graded Material Spreding In Uniform Layers With Mortar Grader On Prepared Surface completion , Providing And Laying Of Rubber Moulded Interlocking Concrete Block With 80 Mm Thick Icbp ( 75% Gray & 25 % Red /Yellow Coloured) Etc All Cmp , Reinforced Cement Concrete Work With Cement Approved Coarse Sand And 2 Cm (3/4) Gauge Approved Stone Ballast In The Proportion 1:2:4 ( 1 Cement:6 Aggregate) In Lintels Of Doors And Windows Etc All Comp , Mild Steel Or Iron In Plain Work Such As Reinforced Concrete Or Reinforced Brick Work ( When Ot Include In Overall Rates) Wrought To Required Shape As Necessary Including Bending For Proper Completion Of The Work Etc All Comp , Supply And Fixing Of Inogaration Board Paidestal Etc All Comp , Construction Of Gully Pit As Per Design Of Knn Etc All Comp , Cartage Of Earth Up To 3 Km Including Loading & Unloading Etc All Comp , Add 18% Gst
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 9
Uttar Pradesh View Result →
17.
Public Administrative Department #11466088 Price Bid
Tender for Dismentaling Of Interlocking Tiles Etc All Comp , Dismantaling Brick Work Or Stone Work In Lime Or Cement Mortar And Including Stocking Of Materials As Directed Etc All Comp , Dismentaling Of Cement Concrete Etc All Comp , Earth Work In Ecxavation In Ordinary Soil Lead 30 Mt& Lift 1.5 Mtincl Lab T&P Etc All Comp , Laying Of Base Concrete 1:6:12 With Cement C.Sand & 40 Mm Brick Ballast Etc All Cmp , Class-150 Brick Work In 1:4 Cement & Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And Tools And Plants Etc All Comp , 12 Mm Thick Plaster In Single Coat On Fair Side Of Single Or Half Brick Wall For Interior Plastering Up To Floor Two Level Including Etc All Comp , Providing And Laying At Or Near Ground Level Factory Made Kerb Stone Of M-25 Grade Cement In Position To The Required Line Level And Curvature Jointed With Cement Mortar Etc All Comp , Construction Of Gsb Granular Sub Base By Providing Well Graded Material Spreding In Uniform Layers With Mortar Grader On Prepared Surface completion , providing and laying Of 125 Micron Plastick Sheet Providing Over Sub Base Etc All Comp , Providing And Laying Design Mix Cement Of M-30 Grade In Road/Tak Tracks Runways Using Cement Etc All Comp , Reinforced Cement Concrete Work With Cement Approved Coarse Sand And 2 Cm (3/4) Gauge Approved Stone Ballast In The Proportion 1:2:4 ( 1 Cement:6 Aggregate) In Lintels Of Doors And Windows Etc All Comp , Mild Steel Or Iron In Plain Work Such As Reinforced Concrete Or Reinforced Brick Work ( When Ot Include In Overall Rates) Wrought To Required Shape As Necessary Including Bending For Proper Completion Of The Work Etc All Comp , Sale Of Material To Contractor Old Brick Etc All Comp , Sale Of Material To Contractor Brick Bats Etc All Comp , Supply And Fixing Of Inogaration Board Paidestal Etc All Comp , Construction Of Gully Pit As Per Design Of Knn Etc All Comp , Raising Or Manhole Chamber Etc All Comp , Construction Of M.H Chamber 0.60X0.60X1.20 Etc All Comp , Cartage Of Earth Up To 3 Km Including Loading & Unloading Etc All Comp , Add 18% Gst
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
19.
Heavy Industries and Public Enterprises #11465942 AOC
Tender For Supply And Installation Of Furniture-- 1 Guest House 2 Wardrobe: Manufacturing And Supplying Wardrobe Of Size : 120W X50 D X225 H Cm Storage Side And Shelves Are Made Up Of 17Mm A Grade Treated Rubber Wood Fixed By 1 2 A J Stainless Steel Hinges And Handles Necessary Good Quality Hardware Rate Inclusive Cost Of Material Transportation Loading And Unloading Changes Labour Charges Etc.. Smoothly Finished With Polyurethane Materials 3 Tv Unit: Manufacturing And Supplying Tv Unit Of Size 140 X 120Cm Panel Made Of 17Mm Chemically Treated Rubber Wood Good Quality Fiuing Accessories Provision For Switch Board Etc.. Smoothly Finish With Polyurethane Materials 4 Cot: Manufacturing And Supplying Cot Of Size: 152 W X 198 L X 35 H Cm Frame And All Slats Made By Good Quality Teak Wood Bed With 9Mm Marine Plywood Smoothly Finish By Polishing Two Coats Of Polyurethane Sealer And One Coat Of Polyurethane Top Layer 5 Side Table: Manufacturing And Supplying Side Table Of Size: 60 X50 X 45 Cm Frame And Slats Made By Good Quality Teak Wood Smoothly Finish Polyurethane Sealer And Polish Materials 6 Dressing Table: Manufacturing And Supplying Dressing Table Of Size: 75 Xl60 X60 Cm And Mirror Unit Of Size: I 10 X 75 Cm Frame And Slats Made By Good Quality Teak Wood Smoothly Finish By Polishing Two Coat Of Polyurethane Sealer And One Coat Of Polyurethane Top Layer 7 Table: Manufacturing And Supplying Table Of Size: 100 X60 X75 Cm Frame And Slats Made By Good Quality Teak Wood Smoothly Finish By Polishing Two Coats Of Polyurethane Sealer One Coat Of Polyurethane Top Layer 8 Ceiling: Providing And Fixing Of Frame Work Made Of Special Sections And L22Mm Marine Plywood And Veneer Provide Necessary Led Panel Light
Contract Date: Jul 03, 2026 Contract Value : 60.15 Lakh
Boards / Undertakings / PSU No of Bidders 3
22.
Public Administrative Department #11458204 Technical Bid
supply and installation of electrical material and repairing, rewinding of motor pumps required and supply of material for daily repair works of water supply pipe line and pumps on for daily repair works of water supply on yearly basis , cable , 2.5 sq.mm submersible cable three core (copper) isi mark , 4 sq.mm submersible cable three core (copper) isi mark , 6 sq.mm submersible cable three core (copper) isi mark , 10 sq.mm submersible cable three core (copper) isi mark , 16 sq.mm submersible cable three core (copper) isi mark , 25 sq.mm submersible cable three core (copper) isi mark , 35 sq.mm submersible cable three core (copper) isi mark , cable with aluminum armored 3 core 50sqmm , cable with aluminum armored 3 core 70sqmm , fuse cut out , 16 ampere , 32 ampere , 63 ampere , 100 ampere , 150 ampere , 200 ampere , 300 ampere , fuse wire , 16 ampere , 32 ampere , 63 ampere , 100 ampere , m.c.c.b l &t make , 16 ampere , 32 ampere , 63 ampere , 100 ampere , 150 ampere , 200 ampere , 250 ampere , 300 ampere , 500 ampere , h.r.c.fuse , 16 ampere , 32 ampere , 63 ampere , 100 ampere , 150 ampere , 200 ampere , 250 ampere , 300 ampere , 500 ampere , main switch 3 pole , 16 ampere , 32 ampere , 63 ampere , 100 ampere , 150 ampere , 200 ampere , 250 ampere , providing and erecting transformer new ab switch complete set. , l.t. l.k. mk -1 dol starter 3 h.p./5 h.p. , no volt coil , contact patti set , relay , contact block , new starter set for 3 h.p./5 h.p. , 15/10 h.p. starter /star delta starter (l&t make mk-1) , no volt coil , contact patti set , relay , contact block , new starter set for 10 h.p./15 h.p. mk -1 , new starter set for 10 h.p./15 h.p. mu-g20 , contactor , mnx -225 , mnx -110 , mnx -a2 , mnx -a1 , mnx -25 , mnx -9 , ml -2 , ml -4 , oil starter 50 h.p. , contact fix patti , contact moving point , no volt coil , fibre plate , conection plate , starte minoir repairing , supplying & erecting new connection terminal beckelite connection plate with copper lugs & copper nut bolt for 50 hp , l&t co2-200 cos - 200a , l&t thermal overload relay mn 12 ct ratio 30 , single phase preventor minilec make , l&t capacitor 1/3 phase , l&t main switch dn-3 630 d , l&t mccb dn-2 250a , l&t mccb du-250 , relay 30a- 50a , relay 20a- 33a , fn 100 tpn switch disconnector fuse unit , l&t make fasd starter ml 1.5 suitable for 10/15 hp , 50 h.p.ats starter , timer , auxiliary switch , on off switch , no volt coil , monir repairing , 80 h.p. ats starter , timer , auxiliary switch , on off switch , monir repairing , 100 h.p. ats starter , timer , auxiliary switch , on off switch , monir repairing , aluminium lugs , 16 mm , 25 mm , 35 mm , 50 mm , 70 mm , 95 mm , 120 mm , 150 mm , 185 mm , 240 mm , 300 mm , copper lugs , 16 mm , 25 mm , 35 mm , 50 mm , 70 mm , copper bus bar , crimping tool manual , crimping tool hydraulic operated , transformer bush hv/lv 63/100/160/ kva , transformer rod hv/lv 63/100/160 kva , transformer oil filter , transformer new oil filling (filtered) , rewinding of motors , 1 hp el. motor (mono block) rewinding with material and labour , 3 hp el. motor (mono block) rewinding with material and labour , 5 hp el. motor (mono block) rewinding with material and labour , 10 hp el. motor (mono block) rewinding with material and labour , 15 hp el. motor (mono block) rewinding with material and labour , 1 hp el. motor (submersible) rewinding with material and labour , 2 hp el. motor (submersible) rewinding with material and labour , 3 hp el. motor (submersible) rewinding with material and labour , 5 hp el. motor (submersible) rewinding with material and labour , 7.5 hp el. motor (submersible) rewinding with material and labour , 10 hp el. motor (submersible) rewinding with material and labour , 15 hp el. motor (submersible) rewinding with material and labour , 20 hp el. motor (submersible) rewinding with material and labour , 30 hp el. motor (submersible) rewinding with material and labour , 35 hp el. motor (submersible) rewinding with material and labour , 80 hp el. motor (submersible pump ) rewinding with material and labour , 100 hp el. motor (submersible) rewinding with material and labour , 3 hp el. motor (submersible mono block) rewinding with material and labour , 5 hp el. motor (submersible mono block) rewinding with material and labour , 7.5 hp el. motor (submersible mono block) rewinding with material and labour , 10 hp el. motor (submersible mono block) rewinding with material and labour , 15 hp el. motor (submersible monoblock) rewinding with material and labour , 30 hp el. motor (submersible mono block) rewinding with material and labour , 50 hp el. motor (vt pump ) rewinding with material and labour , 2 hp mud pump set (vertical) rewinding with material and labour , 3 hp mud pump set (vertical) rewinding with material and labour , 5 hp mud pump set (vertical) rewinding with material and labour , 10 hp mud pump set (vertical) rewinding with material and labour , 15 hp mud pump set (vertical) rewinding with material and labour , minor repairing/ overhauling of pumps , 1 hp pump , 2 hp pump , 3 hp pump , 5 hp pump , 10 hp pump , 15 hp pump , 30 hp pump , 80 hp pump , repairs and maintenance 50hp vt pump for igatpuri city water supply scheme vertical turbine pump (water lubricated) incliding dowl assembly and discharge hed etc. on provided channel/rsj/rcc beam including erecting on providing sole plate with blue matching , a) removing , b) dismenting , bowl assembly loading, unloading, scrapping & cleaning, checking the bowl assembly… etv complete , making bowl shaft remetalising, machining, impeller fiting size machining… etc complete , making bowl bush bronze metal machining pressing thrugh & boaring… etc complete. , making impeller and impeller neck ring through cut& balancing work… etc complete. , making bowl body neck ring machining as per required impeller size… etc complete. , making impeller collet and lock machining and fitting… etc complete. , making new strainer with stainless steel jail… etc complee , supplying misc sundry & hardware material like new nut bolt gasket packing and gland packing… etc complete. , making threading work for line shaft of 5ft length and facing through polish… etc complete. , making line shaft new coupling as sleeve reconditioning and thrugh polish… etc complete. , making gland shaft stainless steel remetalising machining and through polish… etc comlete. , making old (gm) impeller nackring repairing on lathe machine work…etc complete. , bowl assembly, dismentaling & removing al parts and re-installing property labour charges. , making new line shaft 316 materal including of lathe machining work. , making rubber bush reconditioning…etc complete. , providing and erecting new rubber spider. , making 250mm column pipe-each 5 feet length scrapping & de rusting colouring and painting work…etc complete , transportation of dismantled parts of pump fom raw water pumping to nashik work shop including loading unloading…etc complete , transportation of dismantled parts of pump after repairing from nashik work shop to raw water pumping site with loading unloading …etc complete , assembling and re-erection of 50hp vt pump set at actual site. , supplying & erecting new coupling set with nut bolts and rubber. , supplying & erecting new line shaft s.s lenght – 5 feet. , supplying & erecting new line shaft coupler , supplying & erecting new line shaft sleeve , supplying & erecting new bowl shaft , repairs and maintenance 50hp vhs electric motor for , a) removing 50 hp vhs electric motor , b) dismantling 50 hp vhs electric motor , transportation of above motor form nashik work shop site to raw water pumping including loading & unloading with tools & tackles etc complete , rewinding and repairs of squirrel cage including motors 440 v,3 phase 50 cycles/sec, 1500 rpm with b class insulation including heating, oven baking varnishing, painting etc complete. (60 hp motor) , supplying taper roller bearing fag x-life 29326 , supplying ball bearing 6320 , supplying gland packing 20 mm , supplying champion packing 3m x 200m , a) assembling 50hp vhs electric motor , b) re- erection of 50hp vhs electric motor , transportation of dismantled parts of pump after repairing from nashik work shop to raw water pumping site with loading unloading …etc complete , supplying & erecting new connection terminal backlit connection plate with copper lugs & copper nut bolt for 60hp motor , supplying copper lugs 70sq.mm , 3 hp motorpump replacement of bearing (submersible/monoblock) , 5 hp motorpump replacement of bearing (submersible/monoblock) , 10 hp motorpump replacement of bearing (submersible/monoblock) , 15 hp motorpump replacement of bearing (submersible/monoblock) , 30 hp motorpump replacement of bearing (submersible/monoblock) , 80 hp motorpump replacement of bearing (submersible/monoblock) , 100 hp motorpump replacement of bearing (submersible/monoblock) , 50 hp motor pump replacement of bearing (turbine pump upper bearing ) bearing no. 7317 bep , 50 hp motor pump replacement of bearing (turbine pump lower bearing ) bearing no. 6212 , minor repairing of electric panels , 5 hp pump panel , 10 hp pump panel , 15 hp pump panel , 30/35 hp pump panel , 50 hp pump panel , 75/80/85 hp pump panel , repairing of 50 hp vfd panel (minor) , repairing of 50 hp vfd panel (major) , repairing of 80 hp vfd panel (minor) , repairing of 80 hp vfd panel (major) , rewinding of tranformer 63 kva , rewinding of tranformer100 kva , rewinding of tranformer 160 kva , supply & installation of new tranformer 63 kva , supply & installation of new tranformer 100 kva , supply & installation of new tranformer 160 kva , supply & installation of new 0.5 hp motor monoblock ( crompton/kirloskar/abb) , supply & installation of new 0.5 hp pistion pump set , supply & installation of new 3 hp motorpump set monoblock (crompton/kirloskar/texmo) , supply & installation of new 5 hp motor pump set monoblock (crompton/kirloskar/texmo) , supply & installation of new 5 hp motor open well sub mersible mono block (horizontal ) (crompton/kirloskar/texmo) , supply & installation of new 5 hp motor sub mersible (vertical) (ksb/kirloskar/lubi/ cri) , supply & installation of new 10 hp motor pump set monoblock (crompton/kirloskar/texmo) , supply & installation of new 10 hp motor open well sub mersible mono block (horizontal ) (crompton/kirloskar/texmo) , supply & installation of new 10 hp motor sub mersible (vertical) (ksb/kirloskar/lubi/ cri) , supply & installation of new 15 hp motor pump set monoblock (crompton/kirloskar/texmo) , supply & installation of new 15 hp motor open well sub mersible mono block (horizontal ) (crompton/kirloskar/texmo) , supply & installation of new 15hp motor sub mersible (vertical) (ksb/kirloskar/lubi/ cri) , supply & installation of new 30/35 hp motor open well sub mersible mono block (horizontal ) (crompton/kirloskar/texmo) , supply & installation of new 75/80 hp motor sub mersible (vertical) (ksb/kirloskar/lubi/ cri) , supply & installation of new 2 hp mud pump set (vertical) (ksb/kirloskar) , supply & installation of new 3 hp mud pump set (vertical) (ksb/kirloskar) , supply & installation of new 5 hp mud pump set (vertical) (ksb/kirloskar) , supply & installation of new 10 hp mud pump set (vertical) (ksb/kirloskar) , supply & installation of new 15 hp mud pump set (vertical) (ksb/kirloskar) , providing and erecting of flow meter repairing complete , repairing of flow meter transmitter card , replacements of flow meter electronic sensor , replacement of sensor cable , repairing of constant voltage transformer , repairing of flow meter display card , replacement of smps of flow meter , supplying & erecting 300mm size flow meter , supplying & erecting 200mm size flow meter , providing and supplying in standard lengths isi mark rigid unplasticised pvc pipes suitable for potable water with solvent cement joints including cost of couplers, as per is specification no. 4985 / 1988 excluding gst levied by gol and gom in all respect,including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores / site and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent).(as per mjp dsr 2018-19) , working pressure 4 kg./sq.cm , 63 mm , 75 mm , 90 mm , 110 mm , 140 mm , 160 mm , working pressure6 kg./sq.cm , 63 mm , 75 mm , 90 mm , 110 mm , 140 mm , 160 mm , providing and supplying in standard lengths isi mark rigid upvc pipes , 15 mm , 20 mm , 25 mm , 63 mm , providing isi mark gi. pipe of following class and dia. including all statutory duties & taxes such as gst levied by goi & gom in all respect, inspection charges, transportation to stores, etc. complete as per is-1239/2004. , medium , 15 mm , 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , 150 mm , supply of necessary items related to hard wares required for daily repair works of water supply pipe line on yearly basis , upvc elbows 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 3 inch , upvc mta 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , upvc fta 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , pvc reducer , size 1/2 x 3/4 inch , size 3/4 x 1 inch , size 1 x 1 1/2 inch , size1 1/2 x 2 inch , size 2 x 2 1/2 inch , size 2 x 3 inch , size 2 1/2 x 3 inch , size 3 x 4 inch , size 4 x 5 inch , size 4 x 6 inch , size 5 x 6 inch , upvc reducer , size 1/2 x 3/4 inch , size 3/4 x 1 inch , size 1 x 1 1/2 inch , size1 1/2 x 2 inch , size 2 x 2 1/2 inch , size 2 x 3 inch , size 2 1/2 x 3 inch , pvc end cap plains 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , size 6 inch , upvc end cap plains 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , pvc end cap threaded 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , upvc end cap threaded 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , g. i. end cap threaded (inside threaded ) , size 1/2 inch , size 3/4 inch , size 1 inch , g. i. end cap threaded (outside threaded ) , size 1/2 inch , size 3/4 inch , size 1 inch , pvc socket 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , size 6 inch , size 8 inch , upvc socket 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , pvc bend 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , size 6 inch , size 8 inch , upvc bend 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , upvc ball valve , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , pvc ball valve , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , g. i. bend , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , g. i. socket , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , size 6 inch , g. i. elbow , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , size 6 inch , g. i. tee , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , g. i. barrel nepple , 1/2 x 3 , 1/2x 4 , 1/2x 6 , 1/2 x 9 , 1/2x 12 , 3/4x 3 , 3/4x 4 , 3/4x 6 , 3/4x 9 , 3/4x 12 , 1x 3 , 2x 3 , 3 x 5 , pvc repairing coupler elastomatric , 63 mm. , 75 mm. , 90 mm. , 110mm , 160 mm. , pvc solution , 20 ml , 50 ml , 100 ml , 200 ml , upvc solution , 20 ml , 50 ml , 100 ml , 200 ml , 500 ml , m-seal , 10 gm , 50 gm , 100 gm , 200 gm , 500 gm , taparia spanners open ended , 10-11. , 12-13. , 14-15. , 16-17. , 18-19. , 20-21. , 22-23. , 24-25. , 26-27 , 28-29 , 30-31 , 32-33 , 34-35 , ring spanner , 10-11. , 12-13. , 14-15. , 16-17. , 18-19. , 20-21. , 22-23. , 24-25. , 26-27 , 28-29 , 30-31 , 32-33 , 34-35 , valve cap , 2 valve cap , 3 valve cap , 4 valve cap , 6 valve cap , 8 valve cap , 10 valve cap , 12 valve cap , 14 valve cap , air valve ball , 2 valve ball , 3valve ball , 4 valve ball , 5 valve ball , 6 valve ball , abrasive grinder wheel fo size 6 , abrasive grinder wheel fo size 8 , abrasive grinder wheel fo size 10 , 18(450 mm) size venus/ taparia pipe wrench , 14(350 mm) size venus/ taparia pipe wrench , 12(300 mm) size venus/ taparia pipe wrench , 9(2253 mm) size venus/ taparia pipe wrench , tikav arm (tikav danda) , tata tikav , favada arm ( favada danda) , tata favada , nut bolts as per requirement , nylon rope , industrial rubber sheet , hack -saw frame , gland , hack -saw blade , providing and fixing in position m.s. air valve boxes fabricated with 2mm thick m.s. plate, 30 x 30 x 3 mm size m.s. angle frame, concreting in m-150 for fixing the box in position, appling two coats of oil paint, painting chainage, locking arrangement, etc. complete as directed by engineer-in-charge. , for single ball air valve , for double ball air valve , providing and fixing c.i. road box including loading,unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete. , 100mm x 225mm(20kg) , 225mm x 300mm(40kg) , providing , hoisting and fixing in position c.i. manhole, frame and cover of best qualify and of required size and shape with locking arrangements including applying 2 coats of anticorrosive paint, etc. complete, etc. complete. , 90 x 60 cm size and weight 35 kg , rate on weight basis for any size and type of frame and cover , providing and fixing in position m.s. ladder 0.50 m wide consisting of 75 x 10 mm m.s. flats as stringers and 16mm dia m.s. bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved, welding, anchoring and applying 3 coat of anti-corrosive paint, etc. complete as directed by engineer-in-charge. , providing and fixing water level indicator upto 5 m height including m.s. enamelled gauge plate 300mm wide 3mm thick, p.v.c. float, providing and fixing required accessories such as pointer, pulleys, nylon thread including cost of all material, labour, etc. complete. , providing and fixing water level indicator upto 5 m height including m.s. enamelled gauge plate 150mm wide 3mm thick, p.v.c. float, providing and fixing required accessories such as pointer, pulleys, nylon thread including cost of all material, labour, etc. complete. , rachet drill set isi mark , 12 mm (1/2) , 20 mm (3/4) , 25 mm (1) , pipe die set , 12 mm (1/2) , 20 mm (3/4) , 25 mm (1) , g.i. union , 12 mm (1/2) , 20 mm (3/4) , 25 mm (1) , patti valve m s , 12 mm (1/2) , 20 mm (3/4) , 25 mm (1) , 50 mm (2) , grease castrol , cotton rope , screw driver taparia , tester taparia , insulated electric plier 12taparia , hammer 1/2 kg , hammer 1 kg , hammer 1.5 kg , hammer 2kg , pahar 4 foot , pahar 6 foot , lock godrej 7 levers small size , lock godrej 7 levers big size , providing double flange sluice valve confirming for ls-14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspectioncharges, transportation upto departmental store, unloading, stacking excluding gst levied by goi & gom in all respect etc. complete. , sluice valves - pn -1 without bypass , 50 mm. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , 400mm , sluice valves - pn -1.6 without bypass , 50 mm. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , 400mm , providing and supplying isi mark cl dif reflux valves (non return valves ) of following dia including raihvay freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding gst levied, by goi & gom in all respect etc. complete. reflux valves as per i.s.5312 part i (1984) , reflux valves ( non return valve) - pn -1 without bypass , 50 mm. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , 400mm , reflux valves ( non return valve) - pn -1.6 without bypass , 50 mm. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , 400mm , check nut ( phosphor bronze / gun metal) of sluice valve with machining as per spindle , 50 mm. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , steel wire rope , plastic bucket 10 lit. , plastic bucket 20 lit. , plastic bucket 25 lit. , ghamela/round create 10 , providing q.nd supplying lsl standard d. l. specials & fitting with sealing rubber gasket of s.b.r,complete with cast iron follower gland and m. s. nut bolts coated or otherwise protected from rusting and suitable for d.l.pipes including cost of labour, materials, and transpotlaiion to stores, loading and unhading excluding gst levied by goi & gom in all respect etc. complete as per is-9523 , for all types of specials , bends,tees etc. , 80 to 300 mm dia , providing and supplying isi standard ms specials of required thickness with 3 coats of approved nlake epoxy paint (shalimar, ciba or matiindra & mahindra make) from inside and outside excluding gst levied by goi & gom in all respect including irrspection charges, transportation to stores and stacking, etc. complete. , for all types of ms specials , bends,tees flanges etc. , providing and supplying i.s.l. mark rubber gasket suitable for c.l. or d. l. pipe nf all class for tyton joints including inspection charges, transportation upto departrnental stores excludine gst levied by goi & gom in all respect etc. complete. , s.b.r. gaskets for c. l. / dl pipes. , 80 mm. , 100 mm. , 150mm , 200 mm. , 250 mm. , 300mm , s.b.r. tyton joint rubber ring for mechanical joints , 80 mm. , 100 mm. , 150mm , 200 mm. , 250 mm. , 300mm , providing and supplying in standard lengths polvethelene pioes. confirmino to.ls 4984/14151/12786/13488 latest version with necessary jointing material li ke mechanical connector i. e.thread / insert joint / quick release coupler joint/ compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding gst levied by gl & gom in all respect , pe 100 6 kg/ sq.cm , 25 mm. , 63 mm. , 75 mm. , 110 mm. , concrete breaker machine hitachi make , 6 kg. , 10.5 kg. , 12.5 kg. , 16 kg. , flexible plastic ring pipe ( bangadi pipe) , 25 mm , 50 mm , 75 mm , 110 mm. , plastic drum 200 lit. , flexible rubber pipe 1/2 , flexible rubber pipe 3/4 , flexible rubber pipe 3/4 , ci / ms water tap 1/2 , ci / ms water tap 3/4 , drill tap set 1/2 , drill tap set 3/4 , sintex three layer water tank 500 lit.to 5000 lit. capacity , pvc tail piece 6 kg , 63 mm , 90 mm. , 110mm , lsupply of c. l. mechanical compression flanged / socket tailpiece (popularly known as tm flanged / socket tailpiece) suitable for making flanged connection with the plain barrel of c. l. spun pipes ( as per - ls - 1536 120o1) and d. l pipes ( as per ls: 8329 / 2000).the tailpiec to be supplied complete with sealing rubber gasket of s.b.r, c.l. follower glands and m.s. nut bolts.the whole assembly should be mechanically and hydraulically tested to the provisions as laid down in ls:1538 /1993. the rates are inclusive of cost of material, freight charges, loading,transportation and unloading at departemental store, excluding gst levied by gol and gom in all respect, etc.complete. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , supply of c.i. mechanical compression collar coupling suitable for c.l. spun pipes (as per ls-1536/2001) and complete with sealing rubber gasket of sbr, c.1., follower glands and m.s. nut bolts. the whole assembly should be mechanically and hydraulically tested to the provisions as laid down in ls:1538/1993) including all statutary duties and taxes such as gst levied by gol and gom in all respect . , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , supply of c.i. mechanical compression collar end cap suitable for c.l. spun pipes (as per ls-1536/2001) and complete with sealing rubber gasket of sbr, c.1., follower glands and m.s. nut bolts. the whole assembly should be mechanically and hydraulically tested to the provisions as laid down in ls:1538/1993) including all statutary duties and taxes such as gst levied by gol and gom in all respect . , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , di pipe cutter machine heavy duty 600w ac 220- 240 v (make - bosch, hitachi) , ferrule 15mm , ferrule 20mm , ferrule 25mm , brass elbows 15mm , brass elbows 20mm , brass elbows 25mm , gi coupling , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , taplon tape , supply of hdep pipe , 100mm , 150mm , supply of hdep tail pice , 100mm , 150mm , supply of ms flange , 100mm , 150mm
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 4
Maharashtra View Result →
23.
Power #11457471 Technical Bid
Procurement Of Unloading Tee, Diffuser Feeder Assy, Ash Intake Valve, Tersg Valve, Vent Valve & Spares Of These Valves Etc. For Ahp-Mm Dept., Btps. , Unloading Tee, Diffuser Feeder Assy, Ash Intake Valve, Tersg Valve, Vent Valve & Spares Of These Valves Etc. , Unloading Tee Pipe, 200Nb For Conveying Line From Esp/Aph Hopper Of Unit#5 Material:Cast Iron Additional Data: M.O.C : Alloy C.I. Size : 200 Nb Hardness : 400 Bhn To 450 Bhn Size : As Per Sample , Diffuser Feeder Assy With Power Cylinder For Nova System , M.O.C: 1. Valve Body: Fg-260, Hardness 190 230 Bhn 2. Seat & Disc: Metalic Body With Ss-440C Liner Hi-Chrome 27/400, Is-4771 Liner, Hardness: 550Bhn 3. Shaft: Ss-304 4. Air Cylinder: 2½ Bore X 6 Stroke (As Per Valve Design) Standard Cushion Double Acting Cylinder Additional Data: Size : 12 X 6 (Size : As Per Sample) , Ash Intake Valve Complete Assembly Without Actuator Additional Data: Size : 7 Inches M.O.C :Body : Ally Ci Grade 25 And 250 Bhn Maximum Disc & Seat:Hi Chrome Measurement: As Per Sample , Tersg Complete Assy,8 W/O Actuator # Additional Data: M.O.C : Body:Alloy C.I. Grade:25, Hardness :250 -300 Bhn Minmum Slide Gate : Alloy C.I. Grade:25,Hardness :250 -300 Bhn Minmum Size :8 Inches (As Per Sample) Shaft:En 8 Seal Strip:Nitrile Rubber Band Clamp: Ss 304 , Tersg Complete Assy W/O Actuator,7 # Additional Data: M.O.C : Body:Alloy C.I. Grade:25, Hardness :250 -300 Bhn Minmum Slide Gate : Alloy C.I. Grade:25,Hardness :250 -300 Bhn Minmum Size :7 Inches (As Per Sample) Shaft:En 8 Seal Strip:Nitrile Rubber Band Clamp: Ss 304 , Outlet Tee 7 Plain Ends. (Body Novaloy For Ash Intake V/V) Additional Data: Size : 7 Inches M.O.C : Alloy C.I Grade 250 Bhn Maximum Measurement: As Per Sample , Diffuser Feeder Disc [Nuva Feeder] # Additional Data: Size : 12 X 6 (As Per Sample) Material : Hi Chrome Measurement: As Per Sample , Seat Of Nuva Diffuser Valv For Nuva Feeder 12Inx10in,For Ahp-I Additional Data: Size : 12 X 6 (As Per Sample) Material : Hi Chrome Measurement: As Per Sample , Valve Disc(Big),Fly Ash Intake Valve 7 For Ash Intake Valve Additional Data: Size : 7 (As Per Sample) Material Disc : Hi- Chrome Measurement: As Per Sample , Valve Disc(Small),Ash Intake Valve Dcips Valve Disc(Small) For Ash Intake Valve Of Unit 1 To 4 Additional Data: Size : 7 (As Per Sample) Material Disc : Hi- Chrome Measurement: As Per Sample , Vent Valve Seat Of Metal Lined, 2-Way For 65 Nb 2-Way Vent Valve Of Dry System , M.O.C: Seat: Metal (Hi-Chrome) Lined With Ss-410 Measurement: As Per Sample €# Dcips Design. Additional Data: Size : 65 Nb M.O.C: Seat: Metal (Hi-Chrome) Lined With Ss-410 Measurement: As Per Sample , Vent Valve Disc Of Metal Lined, 2-Way For 65Nb Vent Valve Of Dry System , M.O.C: Disc: Metal (Hi-Chrome) Lined With Ss-410 Measurement: As Per Sample €# Dcips Design Additional Data: Size : 65 Nb M.O.C: Seat: Metal (Hi-Chrome) Lined With Ss-410 Measurement: As Per Sample , Vent Valve Seat Of Metal Lined, 3-Way For 65Nb 3-Way Vent Valve Of Dry System , M.O.C: Seat: Metal (Hi-Chrome) Lined With Ss-410 Measurement: As Per Sample €# Dcips Design Additional Data: Size : 65 Nb M.O.C: Seat: Metal (Hi-Chrome) Lined With Ss-410 Measurement: As Per Sample , Slide Plate,Alloy Ci Gr25 250-300Bhn,7 For Ahp 7In Tersg Valve Additional Data: Size : 7 Inches (As Per Sample) M.O.C : Ci Gr25 250-300Bhn , Vent Valve Assembly, 3-Way For Dust Collector Of Dry Ash System 1. Valve Body: Fg-260, Hardness 190 30 Bhn 2. Seat & Disc: Metalic Body With Ss-440C Liner / Hi-Chrome 27/400, Is-4771 Liner, Hardness: 550Bhn 3. S Haft: En-8 4. Lever: Forged / Ductile Iron 5. Air Cylinder: 2½ Bore X 4 Stroke Standard Cushion Double Acting Cylinder Additional Data: Size : 65 Nb 3-Way Valve (As Per Sample). , Gst, If Any
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 7
West Bengal View Result →
24.
Defence #11456122 Technical Bid
Tender for Contract Details , Demolition Of Cement Concrete (Unreinforced) In Ground Floors And Pavings N.Exc 15 Cm Thickness (Below Or Above |Ground Level) And Removing Rubbish Material Outside Mod . Complete As Specified And Directed By Engr-In-Charge. , M&L For Roughenig Surfaces Of Old Concrete Floor By Picking, Sweeping Clean And Washing Down With Water To Remove Dust & Brushing Neat Cement Slurry With 3 Kgs Of Cement Per Sqm Wtc All As Specified & Directed By Engr-In-Charge. , M&L For Cement Concrete Work In Pavement/Hard Standing Of Flexural Strength 40 Kg Per Square Centimeter In Field Using 400 Kg Of Cement Per Cubic Metre, Thickness Of Concrete 25 Cm Or Less And Finishing Surface Of Concrete Roads, Pavements By Brooming Complete All As Specified And Directed By Engr-In-Charge. , M&L For Forming 20 Mm Thick Expansion Joints Filled With Pre Formed Bituminous Filler And 30 Mm Primed And Sealed With Sealing Compound Grade A For 150 Mm Thick Concrete Slab Complete All As Speciied And Directed By Engr-In-Charge. , Supply And Fixing In Repair Metal Tubular Dealineator Made Out Of Abs Round Body Fitted With 2 Nos 65 Mm Dia Highly Reflective Reflectors Made Out Of Pmma And Mounted On 45/50 Mm Dia Mild Steel Pipe Of 600 Mm Height Duly Powder Coated And Thermo Plastic Elastomer 3 Bands Of Green, Red And Yellow Reflector Radium Tape Of 25 Mm Wide Strips With Anti Theft Steel Net For Reflector Protection Including Embedding In Plain Cement Concrete 1:2:4 (150X150x300mm) Type B1 Complete All As Specified And Directed By Engr-In-Charge. , Supply And Fixing In Repair Cat Eye Solar Reflective Type Of Metal Body Alloy Of Size 100Mm X 100Mm X 20Mm With Pama Striplens Reflector Of Model No. Da 972.0 Fixed With And Incl Ms Stud Of Suitable Size As Per Manufactures Instructions As Specified And Directed. , Removing Building Materoals Etc To A Distance Of 5 Km Or Under, Beyond The Lead Included In Rates, Including Loadoing, Unloading And Stacking At The Destination , Dismantling Of Stone Slabs And Tiles Of Any Description Or Thickness Laid Bedded And Pointed In Any Mortar In Floor, Aprons Etc And Including Disposal Of All Debris Exc 1.5 Kmtr Not Exc 5 Km. , Providing And And Laying 80Mm Thick Factory Made Chamfered Edge Cement Concrete Paver Block Of M-30 Grade With Approved Colour, Design & Pattern As In Footpath, Parks, Lawns, Drive Ways Or Light Trafficparking Etc., Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over And Including 50Mmn Thick Compacted Bed Of Coarse Sand, Compacting And Proper Embedding/ Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Fine Sand And Cutting Of Paver Block As Per Required Size And Pattern, Finishing And Sweeping Extra Sand; Complete All As Specified And Directed. , M&L For Preparation Of Old Stone, Concrete Surfaces & Applying One Coat Of Synthetic Enamel Paint Of Any Description Over 10Cm Girth Or Width, Not Otherwise Described Complete All As Specified And As Directed. , S&F In Repair For Factory Made Plain Cement Concrete Kerb Stone Of Size 300 X 460X150mm , Laid In Position To The Required Line, Level And Curvature, Jointed With Cement Mortor 1:3 Including Making The Joint With Or Without Grooves Including Making Drainage Opening Where Ever Required Comlete All As Per Direction Of Engineer-In-Charge. , M&L For Plain Cement Concrete 1:2:4 , Type B1 Using 20Mm Graded Stone Agg As In Benching And Coping, Apex Stone Etc, All As Specified And Directed. , M&L For Painting Of Two Coats Synthetic Enemal Paint Over Kerb Stone In White/Yellow/Black Shades Including Priming Coat And Cleaning/Preparation Of The Surface Complet All As Specified.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 7
Uttarakhand View Result →
25.
Power #11454678 AOC
Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - 2827583; 2827583; Service Provider - Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5M In Width As Well As 10 Sqm On Plan) Including Disposal Of Excavated Earth, Lead Upto 50 M And Lift Upto 1.5 M, Disposed Earth To Be Levelled And Neatly Dressed. , Supplying And Filling In Plinth With Local Sand/Stone Dust Under Floors Including,Watering, Ramming Consolidating And Dressing Complete. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering-All Work Up To Plinth Level : 1:2:4 (I Cement 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size). , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering-All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size). , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) , Brick Work With Common Burnt Clay Modular Bricks Of Class Designation 7.5 In Foundation And Plinth In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Brick Work With Common Burnt Clay/Fly Ash F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. Kg , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Openings /Wooden Frames With Rawl Plugs Screws Etc. , Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Cold Twisted Bars , Providing 40X5 Mm Flat Iron Hold Fast 40 Cm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 30X10x15cm 1:3:6 Mix (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) , Neat Cement Punning , 12 Mm Cement Plaster 1:4 (1 Cement : 4 Coarse Sand) , 12 Mm Cement Plaster 1:6 (1 Cement : 6 Coarse Sand) , 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix 1:6 (1 Cement : 6 Coarse Sand) , Providing And Fixing G.I. Chain Link Fabric Fencing Of Required Width In Mesh Size 50X50 Mm Including Strengthening With 2 Mm Dia Wire Or Nuts, Bolts And Washers As Required Complete As Per The Direction Of Engineer-In-Charge. Made Of G.I. Wire Of Dia. 4 Mm , Providing And Laying Four Courses Water Proofing Treatment With Bitumen Felt Over Roofs Consisting Of First And Third Courses Of Blown Bitumen 85/25 Or 90/15 Conforming To Is : 702 Applied Hot @ 1.45 Kg Per Square Metre Of Area For Each Course, Second Course Of Roofing Felt Type 3 Grade-I (Hessian Based Self Finished Bitumen Felt) And Fourth And Final Course Of Stone Grit 6Mm And Down Size Or Pea-Sized Gravel Spread At 6 Cubic Diameter Per Square Metre Including Preparation Of Surface But Excluding Grading Complete With Bitumen Felt (Hessian Base) Type 3 Grade I Conforming To Is : 1322. , Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Finished With A Floating Coat Of Neat Cement Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete.40 Mm Thik With 20Mm Nominal Size Stone Aggregate , Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Upto 50 M And Lift Upto 1.5 M. , Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade One Or More Coats On Old Work. , Dismantling Roofing Including Ridges, Hips, Valleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of G.S. Sheet , Dismantling Roofing Including Ridges, Hips, Valleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of Asbestos Sheet , Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Providing Corrugated G.S. Sheet Roofing Including Vertical/Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead And Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/ Vertical Or Curved Surfaces) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275Gm/ M² , Lettering With Black Japan Paint Of Approved Brand And Manufacture , Making The Opening In Brick Masonry Including Dismantling In Floor Or Walls By Cutting Masonry And Making Good The Damages To Walls, Flooring And Jambs Complete, To Match Existing Surface I/C Disposal Of Mulba/ Rubbish To The Nearest Municipal Dumping Ground. , Carriage Of Material By Mechanical Transport Including, Loading, Unloading And Stacking :Earth, Building Rubbish Etc .(Rate Applicable After Deduction Of Void As Per Cpwd/Pwd Norms) Up To 2 Km , Providing Jack Hammer With Compressor Its Lead And Operator For Making Hole In Slab And Breaking R.C.C. And Exposing Existing Reinforcement And J.C.B Machine With Driver/Operator Fuel Hire Etc. Complete. , Providing & Fixing Top Cover Rolling Shutters , Providing & Fixing Ball Bearing For Rolling Shutters. , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Is: 4454 – Part 1 And M.S. Top Cover Of Required Thickness For Rolling Shutters.80X1.20 Mm M.S. Laths With 1.20 Mm Thick Top Cover. , Extra For Providing Mechanical Device Chain And Crank Operation For Operating Rolling Shutters, Exceeding 10.00 Sqm And Upto 16.80 Sqm In The Area. , Dewatering By Pump Of Capacity 5/7.5 Hp With 4Meter Sump And 50Meter Pipe Length Including Installation, Operator /Helper ,Desiel/ Fuel Etc. As Per Direction Of Engineer In Charge. , Repair Of Rooling Shutter Through Repairing Of All Part Of It Including Required Size M.S. Laths ,Interlocked Together Their Enteir Length And Jointed Together At The End By Locks Mounted On Specially Designed Pipe Shaft With Breackets ,Side Guides And Arrangements For Inside And Out Side Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adeqate Strength Conforming To Is:4454-Part 1 And M.S. Top Cover Of Requierd Thickness For Rolling Shutter. 80X1.20Mm M.S. Laths With 1.20 Mm Thick Top Cover .Including All T&P And Manpower Complete. , Welding By Gas Or Electric Plant Including Transportation Of Plant At Site Etc. Complete. , Structural Steel Work In Single Section, Fixed With Or Without Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Without Applying A Priming Coat Of Approved Steel Primer All Complete. , Same As Above Item But Material Shall Be Provided By Department To The Contractor Free Of Cost. , Providing Ridges Or Hips Of Width 60 Cm Overall Width Plain G.S. Sheetfixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Dia G.I.Limpet And Bitumen Washers Complete. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm/M² , Providing And Fixing 1Mm Thick M.S. Sheet Door With Frame Of 40X40x6 Mm Angle Iron And 3 Mm M.S. Gusset Plates At The Junctions And Corners, All Necessary Fittings Complete, Including Applying A Priming Coat Of Approved Steel Primer.Using M.S. Angels 40X40x6 Mm For Diagonal Braces
Contract Date: Ref. Documents Contract Value : 31.38 Lakh
Boards / Undertakings / PSU No of Bidders 3
Uttar Pradesh View Result →
27.
Public Administrative Department #11441629 Price Bid
Tender for Fixation Of Local Market Rate For Implementation Of Different Scheme Under Mgnrega Under Suri-I Development Block. , Hire Charges Of Concrete Mixer With Fuel 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller With Fuel- 8 To 10 Tonne , Vibrator With Fuel (Needle Type 40 Mm) , Surface Vibrator With Fuel , Water Tanker 5000 Ltr. Capacity , Coolie , Fitter(Grade1) , Technician , Helper (Technician) , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Brick Aggregate (Single Size):50 Mm Nominal Size , Brick Aggregate (Single Size):40 Mm Nominal Size , Stone Aggregate(Single Size):63 Mm Nominal Size , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Stone Aggregate(Single Size): 06 Mm Nominal Size , Coal Tar , Portland Cement , White Cement , Coal (Steam) , Brass 150 Mm Floor Door Stopper (0.357 Kg) , Chromium Plated Brass Mortice Latch And Lock 100X65 Mm With 6 Levers And A Pair Of Brass Lever Handles , Unslaked Lime , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm/Liitre , Ready Mixed Pink Or Grey Primer On Wood Work(Hard And Softwood) Having Voc Content Less Than 50 Gms/Litre , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , Moorum , Black Japan , Synthetic Enamel Paint In Black Or Chocolate Shade , Superior Copal Varnish , Green Or Blue Medium Shade Pigment , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , Galvanised Steel Plain Sheets , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , Galvanised Steel J Or L Hooks 8 Mm Dia , G.I Limpet Washer , Bitumen Washer , G.I. Plain Washer For Seam Bolts , Water Proofing Materials , Welding By Electric Plant , Wire Mesh (Rabbit) , Diesel Oil , C.I. Grating 100X100 Mm , Mirror Of Superior Make Glass 60X45 Cm , Vitreous China Pedestal For Wash Basin , Gi Pipes 15 Mm Dia , Gi Pipes 20 Mm Dia , Gi Pipes 25 Mm Dia , Gi Pipes 32 Mm Dia , Gi Pipes 40Mm Dia , Gi Pipes 50 Mm Dia , Gi Pipes 65 Mm Dia , Gi Pipes 80 Mm Dia , Slotted Cowl 75 Mm , Slotted Cowl 110 Mm , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Reinforced Cement Concrete Pipes Np2 Class 300 Mm Dia , Reinforced Cement Concrete Pipes Np2 Class 450 Mm Dia , White Plastic Seat (Solid) With Lid C.P. Brass Hinges And Rubber Buffers , Shower Rose C.P Brass For 15 To 20 Mm Inner 100 Mm Dia , Shower Rose C.P.Brass For 15 To 20 Mm Inner 150 Mm Dia , Vitreous China Squatting Plate , Ball Valve 15 Mm Dia , Ball Valve 20 Mm Dia , Ball Valve 25 Mm Dia , Brass Full Way Valve With C.I. Wheel (Screwed End) 20 Mm Dia , Vitreous China Flat Back Wash Basin 630X450 Mm , Vitreous China Angle Back Wash Basin 400X400 Mm , Vitreous China Foot Rest 275Mmx125mmx25mm , Carriage Of Steam Coal , Carriage Of Stone Aggregate Below 40 Mm Nominal Size , Carriage Of Steel , Carriage Of Stone Aggregate 40 Mm Nominal Size And Above , Carriage Of Tar Bitumen , Carriage Of Soling Stone & Masonry Stone , Carriage Of Carriage Of Moorum , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Float Glass Sheet Of Nominla Thickness 5.5 Mm (Weight Not Less Than 13.50 Kg/ Sqm) , Float Glass Sheet Of Nominal Thickness 8 Mm (Weight Not Less Than 20.00 Kg/Sqm) , Anodised Aluminium Hanging Type Door Stopper , Carriage Of Cost Of Neelgiri/Maxican Grass Truf Sqm , Galvanised Steel Corrugated Sheets , Vitreous China Flat Back Wash Basin 550X400 Mm , Stainless Steel Bolts /Square Bar And Plates , Mild Steel Tubes Hot Finished Seamless Type , Red Oxide Zinc Chromate Primer , Vitreous China Flat Back Wash Basin 450X300 Mm , Hydraulic Door Closer Tubular Type Aluminium Section Body , Oxidised M.S. Casement Stay (Straight Peg Type) 300 Mm Not Less Than 0.33 Kg , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) P Trap , Circular Shape 450 Mm Dia Precast Reinforced Cement Concrete Manhole Cover With Frame L.D. -25 , Upvc Pipes (Working Pressure 4 Kg /Cm2 ) Single Socketed Pipe 75 Mm Dia , Supply Of Upvc Pipe 110 Mm Dia , Supply Of Upvc Plain Tee 75 Mm Dia , Supply Of Upvc Plain Tee 110 Mm Dia , Supply Of Upvc Door Tee 75 Mm Dia , Supply Of Upvc Door Tee 110 Mm Dia , Supply Of Upvc 87.5* Bend 75 Mm Dia , Supply Of Upvc 87.5* Bend 110 Mm Dia , Upvc Pipe Clip 75 Mm , Upvc Pipe Clip 110 Mm , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement , C.P.Brass Bibcock 15 Mm , C.P. Brass Long Body Bibcock 15 Mm , Chromium Plated Concealed Stop Cock , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , White Vitreous China Clay Half Stall Urinal Flat Back 580X380x350 Mm Or Angle Back 450X375x350 Mm With Waste Fittings As Per Is: 2556 , 15 Mm Ptmt Bib Cock , Ptmt Pillar Cock , Ptmt Push Cock 15 Mm , Ptmt - Liquid Soap Container Of 400 Ml Capacity , Ptmt - Soap Dish/Holder 138X102x75 Mm , Coloured Inter Locking cement concrete Paver Block , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Rectified - Ceramic Glazed Tiles Ist Quality 300 X 300 Mm Or More In All Shades Designs White, Ivory, Grey, Fume Red Brown Etc , Adhesive Solvent Cement , Geotextile 120 Gram Per Sqm Membrane , Acrylic Exterior Paint , Vitrified Floor Tile 60X60 Cm , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 25 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 32 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 40 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 50 Mm Outer Dia , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Carriage , G I Wire , Paddy Straw , Nylon Net , 1St Class Picked Jhama Bricks(Traditional) , Stone Boulder( 225 Mm Above ) , Stone Boulder ( 225Mm-150Mm ) , Laterite Boulder , Fine Sand , Medium Sand , Coarse Sand , Bamboo (8Cm-10Cm Dia) Including Fixing , Eucalyptus Bullah (7.5Cm -10Cm Dia) , Eucalyptus Bullah (12.5Cm -15Cm Dia) , Eucalyptus Bullah (17.5Cm -20Cm Dia) , Sal Bullah (7.5Cm -10Cm Dia) , Sal Bullah (12.5Cm -15Cm Dia) , Sal Bullah (17.5Cm -20Cm Dia) , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) With Prop Including All Fittings , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) Without Prop Including All Fittings , Hire Charges Of Shuttering Plank (Above 30Mm-37Mm Thick) With Prop Including All Fittings , Hire Charges Of 5 Kva Generator , Hire Charges Of 3 Kva Generator , Hire Charges Of Monkey Set , Loading Unloading & Stacking Sand/ Stone Aggregate (Less Than 40Mm Nominal Size) , Loading Unloading & Stacking Stone Aggregate (Above 40Mm Nominal Size) , Loading Unloading & Stacking Lime, Moorum, Building Rubish And Similar Miscellaneous Material , Stone Screening Type A (13.2 Mm) , Stone Screening Type B (11.2Mm) , 1St Class Traditional Bricks (Kiln Burnt) , River Bed Material 40 Mm Down , Tor Steel Rods/Hysd Bars/Tmt Bars (Sail/Tata/Rinl) (Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars (Other Than Sail/Tata/Rinl/Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Loading, Unloading And Stacking By Manual Means Of Steel , Sal Silliguri , Sal Malaysia , Neem Wood , Other Local Wood , Ordinary Teak Wood , Sisu/Gamar Wood , Local Sal Wood , Bright Finished Or Black Enamelled Mild Steel Screws 40 Mm , Bright Finished Or Black Enamelled Mild Steel Screws 20 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x 1.50 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x 1.70 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x 1.90 Mm , Coal Tarring , Fan Hook , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Upto 0.10 Sq.M. Area , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Above 0.10 Sq.M. Area , Udaypur Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Udaypur Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Frp Composite Door Frame 66Mm X 70Mm , Frp Composite Door Frame 66Mm X 90Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) S Trap , 32 Mm Dia Polythene Flush Pipe , 18 Mm Thick Marble Partition Slab For Urinals Including Fitting Fixing (With Chawk Doongri Marble) , Gi Pipe 32 Mm Dia Medium Quality For Underground Works , Gi Pipe 40 Mm Dia Medium Quality For Underground Works , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (15 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (20 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (25 Mm Dia) [For Concealed Work] , Thermocol 12.5 Mm Thick. , Chromium Plated Stop Cock (Equivalent To Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Angular Stop Cock With Wall Flange (Equivalent To Code No. 5053 & Model - Florentine Of Jaquar Or Similar Brand). , Polythene Bib Cock / Stop Cock (Hd) With Metal/Plastic Inlet (Emco / Atlas Or Equivalent) , Sink 630 Mm X 550 Mm X 180 Mm With Waste Fittings And Two Coats Of Painting Of C.I. Brackets , Supplying, Fitting And Fixing Pillar Cock Of Approved Make.Cp Pillar Cock - 15 Mm. (Equivalent To Code No. 507 & Model Tropical / Sumthing Special Of Essco Or Similar Brand). , 15 Mm Swan Neck Tap With Left & Right Hand Operating Nob With Aerator (Equivalent To Code No. 510, 510(A) And Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Structural Members Of Specified Sections Weighing Less Than -22.5 Kg./M (E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp (6)- 1964) , Structural Works In Roof Trusses Etc. Using Joists, Channels And Angles Of Specified Section (Conforming To Is: 226, Is: 808 & Sp (6)- 1964) Weighing Less Than 22.5 Kg/ M , M.S. Structural Works In Roof Trusses With Tubular Sections Conforming To Is: 806-1968 & Is: 1161- 1998 (Trusses Spanning Up To 12.00 M) , M.S. Structural With Hollow Sections (Square Or Rectangular Shape) Conforming To Is: 806-1968 & Is:1161-1998) Span Up To 12 Mtr , P.V.C. Connector 15 Mm Dia 600 Mm Long , Polythene Waste Fittings Complete 32Mm , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps 900 Mm Long , Fly Ash Bricks(Traditional) , Iron Hasp Bolt 250Mm Long , Iron Door Ring 50Mm Dia , Iron Catch Hook 6Mm Dia 225Mm Long , M.S Clamps 40Mm X 6Mm, 125Mm Length , Anodised Aluminium Barrel / Tower / Socket Bolt 150Mm Long X 10Mm Dia. Bolt. , Anodised Aluminium Barrel / Tower / Socket Bolt 300Mm Long X 10Mm Dia. Bolt. , Anodised Aliminium D-Type Handle Continuous Plate Base (Hexagonal/ Round Rod) 150 Mm Grip X 10 Mm Dia Rod , Towel Rail (Cp Over Brass )- 600 Mm , Collapsible Gate , Steel Railing , Ms Integrated Grill For Steel Window And Ventillator , 1.5 Mm Thick Ms Sheet , Ci Manhole Cover 450 Mm Dia , C.P. Over Brass Waste Fittings 32 Mm , Malayasia Sal Cleat , Two Point Nose Steel Handle , Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizotal Glazing Bars. , Top Hung Side Hung Ventillator , Fixed Type Ventilators As Per I.S. Sizes With Horizontal Glazing Bars Height Being Limited To 580 Mm , C.P. Over Brass Waste Fittings 32 Mm , Empty Gunny Bag , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps900 Mm Long , Waste Pipe With Pvc Coupling 750 Mm Long , False Ceiling (With 4Mm Thick Pearl Designer Fibre Cement Board) , False Ceiling (With 6Mm Thick Fibre Cement Designer Board) , Supplying, Fitting & Fixing Asbestos Corrugated Sheet(6 Mm Thick) , Supplying, Fitting & Fixing Asbestos Ridging , Supplying, Fitting & Fixing Zn-Al Alloy Steel Sheet Work In Roof , Supplying, Fitting & Fixing Aluminium Sheet Ridging , Fitting And Fixing Glass Reinforced Polyester Translucent Fiber Glass Sheet , Fitting And Fixing Glass Reinforced Polyester Translucent Ridging 1.6 Mm Thick Shhet , Fitting & Fixing Circular Corrugated Aluminium Sheet , Supplying,Fitting & Fixing Of 2-Track / 3-Track Aluminium Sliding Window , Supplying, Fitting & Fixing Of Partly Glazed Partly Paneled Or Fully Glazed Single Leaf Aluminium Swing Door , Supplying, Fitting & Fixing Of Aluminium Fixed Partition Wall Of All Aluminium Sections , Upvc Plain Y 75 Mm Dia , Upvc Plain Y 110 Mm Dia , Supplying Solid Flush Type Doors Of Commercial Quality , Supplying Fitting And Fixing Of Bitumen Drum Sheet Including Nails For Pilling Or Other Works. , Bitumen Vg-30 , Modular Fly Ash Bricks , Modular Fly Ash Bricks Traditional , Bitumen Emulsion , Precast Cement Concrete Blocks (Nominal Mix. 1:1.5:3 With 20 Mm Down Coarse Aggregate Including Supplying At Site, Laying And Finishing The Top Surface With 1:3 Cement Mortar) , Grade 1 Stone Metal 63 Mm To 45 Mm , Fencing Post 215 Cm 150 Mm X 150 Mm Section At Bottom, 100 Mm X 100 Mm Section At Top With T-Base 300 Mm X 150 Mm X 100 Mm, Having 4 Nos 6 Mm Dia Vertical M.S. Reinforcement And 6 Mm Dia Binders @ 200 Mm Centres, Finished Smooth , Polythene Sheet (150 Gm Per Sqm) , Grill Weighing Above 10 Kg./Sq.Mtr And Up To 16 Kg./Sq. Mtr. , Shower Jet , Corner Urinal , Ci P Trap , Ci S Trap , Porcelain P Trap , Porcelain S Trap , Check Valve 32Mm , Check Valve 40Mm , Check Valve 50Mm , Hire Charges For 5 Hp With Operator,Fuel And Shifting Etc All Charges Complete , Reducing Socket 20Mm X 15Mm , Reducing Socket 25Mm X 20Mm , Reducing Socket 25Mm X 15Mm , Reducing Elbow 20 Mm X 15 Mm , Reducing Elbow 25 Mm X 20 Mm , Silver Sand , Ibs Display Board , Community Display Board
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 5
West Bengal View Result →
28.
Drinking Water Supply and Sanitation #11440764 Technical Bid
It Component And Other Works Of Truck Terminal At Panjapur; 1 SECTION 1.00 ELECTRICAL PANAL 2 MV panel - 1 Incomer-630A4PMCCBOutgoing-200ATPNMCCB-2 Nos,160 A TPN MCCB-1 Nos, 100 A TPN MCCB-2 Nos,40A TPN MCCB -3 Nos, ALUMINUM BUS, POWDER COATED ENCLOSER, R,Y, B INDICATION, MFM, (MCCB-L&T & ABB, Accessories – Reputed Make) 3 MV panel - 2 Incomer-630A4PMCCBOutgoing-400ATPNMCCB-1 Nos,160A TPN MCCB-3 Nos,,100A TPN MCCB-2 Nos, ALUMINUM BUS,POWDER COATED ENCLOSER , R,Y,B INDICATION, MFM, (MCCB-L&T & ABB, Accessories –Reputed Make) 4 ACCP-1,6STAGEAPFCPANEL75KVAR,ALUMINUM BUS, POWDER COATED REPUTED BRAND (MCCB, MCB,POWER CONTACTOR - L&T & ABB, Capacitor and APFC relay–Reputed Make) 5 Commercial block –GROUND FLOOR Incomer: 200A 4 P MCCB -1 nos Outgoing-10a sp mcb+elcb+32a fuse carrier+ meter compartment- 24nos 32a sp mcb+elcb+32a fusecarrier+metercompartment-4nos(MCCB& ELCB,MCB - L&T & ABB, Accessories –Reputed Make) 6 Commercial block -1ST FLOOR Incomer: 125A 4 P MCCB -1 nos Outgoing-10a sp mcb+elcb+32a fuse carrier+ meter compartment- 10nos 32a sp mcb+elcb+32a fusecarrier+metercompartment-6nos(MCCB& ELCB,MCB - L&T & ABB, Accessories –Reputed Make) 7 UTILITYPANELCommercialblockIncomer:160A4P MCCB -1 nos Outgoing:100A TPN MCCB-2 Nos, 40A TPN MCB -2 Nos, 40A DP MCB -1 Nos, ALUMINUM BUS,POWDERCOATEDENCLOSER(MCCB&,MCB- L&T & ABB, Accessories – Reputed Make) 8 UTILITY PANEL – DORMITORY BLOCK Incomer: 400A 4 PMCCB-1nosOutgoing:160ATPNMCCB-4Nos,100A TPNMCCB-5Nos,63ATPNMCCB-3Nos,ALUMINUM BUS,POWDER COATED ENCLOSER (MCCB-L&T & ABB, Accessories –Reputed Make) 9 EXTERNALLIGHTINGPANEL-1Incomer:160ATPN MCCB -1 nos Outgoing:63A TPN MCB-5 Nos,32A DP MCB -3 Nos, ALUMINUM BUS,POWDER COATED ENCLOSER (MCCB-L&T & ABB, Accessories –Reputed Make) 10 EXTERNALLIGHTINGPANEL-2Incomer:160ATPN MCCB-1nosOutgoing:63ATPNMCB-3Nos,32ADP MCB-2Nos,ALUMINUMBUS,POWDERCOATED ENCLOSER(MCCB-L&T&ABB,Accessories–Reputed Make) 11 SUB LT PANEL DORMITORY BLOCK Incomer: 160A 4P MCCB -1 nos Outgoing:40A TPN MCB-5 Nos,40A DP MCB -5 Nos, ALUMINUM BUS,POWDER COATED ENCLOSER (MCCB-L&T & ABB, Accessories –Reputed Make) 12 LIFTPANELIncomer:100ATPNMCCB-1nos Outgoing:100A TPN MCCB-1 Nos,6A SP MCB -3 Nos,16A SPMCB-3Nos,ALUMINUMBUS,POWDERCOATED ENCLOSER(MCCB-L&T&ABB,Accessories–Reputed Make) 13 HV METRING PANEL 630A 11KV OUTDOOR TYPE VCB SP PANEL WITH CT, PT FOR MEASUREMENT AND PROTECTION 14 11KV VCB 3 phase PANEL LINE UP OUTDOOR 1 INCOME, 2 OUTGOING 15 LTISOLATOR630A4PISOLATORPANELOUTDOOR TYPE 16 Supply, errection, testing and commissioning of 11 KV, 25 KA,630A,HTOutdoorThreePanelRingMainGear complete 17 Supply, errection, testing and commissioning of Fire FightingElectricalControlPanelof15HP,415V,50Hz RatingWallMountedTypefabricatedusingCRCAsheet, hinged lockable door, dust and vermin proof with following provisions:Supply, errection, testing and commissioning of Fire Fighting ElectricalControlPanelof15HP,415V,50HzRating Wall Mounted Type fabricated using CRCA sheet, hinged lockable door, dust and vermin proof with following provisions: a. 63 Amps, 4 Pole MCB - Incomer, 6 Amps, 2 Pole MCB for Control Circuit - 1 set b. R, Y, B Phase Indication Lamp, Volt Meter (0 - 500 V), Ammeter (0 - 50 A), Volt Meter Selector Switch- 1 set c. 32 Amps Power Contactor with 230 V Coil, 14 - 23 Amps Over Load Relay - 1 set d. Single Phase Preventer - 1 No. e. Indication Lamp for Motor ON / OFF / TRIP - 1 set f. AUTO / MANUAL Selector Switch, ON / OFF Push Button - 1 set g. Add On Block, Terminal Block, Power Wiring, Control Wiring, Connectors, Cable Lugs, Slotted Cable Cover The above panel mounted on wall using anchor fasteners 18 SECTION 2.00 EARTHEN ROD 19 5 Mtr depth for each earth pit which includes 40mm dia GI Pipe,25X5mmCopperStrips,andcopperearthplateof size 125mm x 50mm x 6mm 20 SECTION 3.00 PUDDLE FLANGE 21 Supply, delivery and fixing following puddle flange including cost of materials and following charges etc. complete. As directed by the departmental officers. 22 50NB x 600mm Pipe L one side Flange & Plate GI 23 65NB x 600mm Pipe L one side Flange & Plate GI 24 80NB x 600mm Pipe L one side Flange & Plate GI 25 100NB x 600mm Pipe L one side Flange & Plate GI 26 200NB x 600mm Pipe L one side Flange & Plate GI 27 80NB x 600mm Pipe L one side Flange, One side thread & Plate GI 28 100NB x 600mm Pipe L one side Flange, One side thread & Plate GI 29 150NB x 600mm Pipe L one side Flange, One side thread & Plate GI 30 300NB x 600mm Pipe L one side Flange, One side thread & Plate GI 31 SECTION 4.00 LANDSCAPING 32 SUPPLY AND FIXING THE MEXICAN CARPET / KORIEN LAWN : New Soil preparation like root regulators, vermin, DAP compost, pest control, weeds control, water irrigation and laid with Mexican carpet lawn. 33 PlantingofDurantanewgoldPlantornamentalfoliage shrub variety of height 30-45cm in polythene bagof size 6x7inchincludingloadingandunloadingcharges, transportation,stackingofsaplingsatsite,earthwork excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 34 supply and fixing ofDuranda Gold (Large) including All charge etc compleded 35 Supplying and Planting of Hibiscus tilliaceus tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation,stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the deparment incharge 36 supply and fixing of Exora including transport including all charge etc 37 supply and fixing of Bycuss Tree Plantincluding transport including all charge etc 38 supply and fixing of Royal Parms including transport including all charge etc 39 supply and fixing of Aricka Parms including transport including all charge etc 40 supply and fixing of Mosanda including transport including all charge etc 41 Planting of Asparagus myuri ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x7 inch includingloadingandunloadingcharges,transportation, stacking ofsaplings atsite, earthwork excavationof required size,planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 42 supply and fixing of Adineeyam including transport charge etc complete 43 supply and fixing of Gulmahar Tree Plant including transport charge etc complete 44 PlantingofTecomacapensisfoliageshrubvarietyof height 30-45 cm in polythene bag of size 6x7 inch including loadingandunloadingcharges,transportation,stackingof saplingsatsite,earthworkexcavationofrequiredsize, plantingofsapling,refillingofexcavatedearthetcas directed by the site in-charge. 45 PlantingofCycusrevoluta21-30 Leavesornamental foliageSpecimenplantvarietyofheight105-120cmin polythenebagofsize16x16inchincludingloadingand unloadingcharges,transportation,stackingofsaplingsat site,earthworkexcavationofrequiredsize,plantingof sapling, refilling of excavated earth etcasdirectedby the site incharge. 46 supply and fixing of Neem Cake including transport charge etc complete 47 Supply of Vermicompost in powder form, devoid of impuritiesandothermaterials,nutrientdenseandwhich supports plant growth including cost of transportation 48 FOUNTAINSUPPLYANDFIXINGFOUNTAINBOTTOM WITH BASE AS PER DESIGN INCLUDING ALL LABOUR AND MATERIAL ETC. 49 SECTION : 5 IT COMPANANT 50 INDOOR & OUTDOOR SURVEILLANCE 51 Supplyandfixingof5.0MPIPOutdoorCamerawith necessary fitting including labour cost,etc complete 52 Supply and fixing of 4.0MP IP PTZ CAMERA with necessary fitting including labour cost,etc complete 53 Supply and fixing of ANPR CAMERA with necessary fitting including labour cost,etc complete.Similar to dahua technologyITC431- RWIF-IRLS 4 mp outdoor network link line plate bullet Camera. 54 Supply and fixing of NVR 32 CH with necessary fitting including labour cost,etc complete 55 Supply and fixing of NVR 8CHwith necessary fitting including labour cost,etc complete 56 Supply and fixing of 8TB HARD DISK complete 57 Supply and fixing 8 PORT POE SWITCH complete 58 Supply and fixing 24 PORT POE SWITCH complete 59 Supply and fixing CAT6 ARMOURD CABLE complete 60 Supply and fixing OFC CABLE 12CORE Armourd complete 61 Supply and fixing OFC CABLE 6 CORE Armourd complete 62 Supply and fixing Outdoor Rack complete 63 Supply and fixing of 3 Core 4 Sqmm Armourd Cable complete 64 Supply delivery and erection for following Networking Accessories, DB, Rack indoor , LIU, Media Converter, SFP, Pigtail, Cable Manager, Connectors etc , complete as direected by the departmental officer 65 Network Accessories 66 16 Port Gigabit Unmanaged Network Switch with 2 SFP (Including Module & Pigtail) 67 Fiber Patch Panel 12 Port 68 LC/LC Single Mode / Multi mode Patch Cord 2mtr 69 Pigtails Single Mode / multi mode Cord LC type for Fiber Patch Panel 70 CAT 6A UTP Armoured Cable 71 CAT 6A UTP 2 mtr Patch Cord 72 CAT 6A Modular 24 Port Patch Panel fully loaded 73 Fiber Single Mode Cables 12 Core Armoured 74 Supply delivery and erection for following NETWORK VIDEO RECORDER FOR CCTV HIGHER END etc , complete as direected by the departmental officer 75 4 Channel - 1 SATA 76 8 Channel - 1 SATA (1 No. Hard Disk) 77 16 Channel - 2 SATA (2 Nos. Hard Disk) 78 32 Channel - 2 SATA (2 Nos. Hard Disk) 79 Supply delivery and erection for following LAN NETWORK SWITCHES - HIGHER ENDFully Managed 10 / 100 / 1000 Layer-3 with 10G Uplink - Higher End 80 24 Port 81 24 Port with Fibre Port 82 48 Port 83 Supply delivery and erection for following MEDIA CONVERTER FOR OPTICAL FIBRE CABLE HIGHER END complete as direected by the departmental officer 84 Single Mode 85 Multi Mode 86 Supply delivery and erection for following I/O SOCKET - HIGHER END complete as direected by the departmental officer 87 RJ-45 88 RJ-11 89 CAT 6 PVC Module Box 90 Face Plate Single Socket RJ-45 91 Face Plate Dual Socket RJ-45 92 Face Plate Quad Socket RJ-45 93 Supply delivery and erection for following HARD DISK FOR NVR - HIGHER END complete as direected by the departmental officer 94 2 TB 95 4 TB 96 6 TB 97 8 TB 98 Supply delivery and erection for following RACK WITH ACCESSORIES - HIGHER END complete as direected by the departmental officer 99 2U Rack 100 4U Rack 101 6U Rack 102 9U Rack 103 12U Rack 104 36U Rack 105 42U Rack 106 Fan extra for the above rack 107 Supply delivery and erection for following Cable Management Box with Cover complete as direected by the departmental officer 108 CABLE MANAGEMENT SYSTEM 109 50mm x 80mm Cable box with cover 110 150mm x 105mm Cable box with cover 111 b. Divider 112 c. Cover Joint 113 d. End Cap 114 e. Joint for Top Part 115 f. Joint for Bottom Part 116 Supply and fixing of Pole 6 Mtrs with footing includng cost of excavation.Pcc,etc complete 117 Supply and fixing of Pole 8 Mtrs with footing includng cost of excavation.Pcc,etc complete 118 Supply and fixing of 15KVA Online UPSnecessary fitting including labour cost,etc complete 119 SupplyandFixingofIPSANwithHDDforSecodary Recording 1 day 120 SupplyandFixingofVMS-IncludingEnterance&Exit ANPR, Surveillance, Parking availability, Parking Mangement, Duration and Payment Calculation 121 Supply and Fixing of VMS Server including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 122 Supply and Fixing of VMS Workstation for Operation including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 123 INTERACTIVE TOUCH PROFESIONAL DISPLAY, ACTIVE LED VIDEO WALL AND VIDEO CONFERENCING SYSTEM 124 65”, 4K, Andriod-13, INTERACTIVE TOUCH Professional Display with USB-C, HDMI-In & Out. 125 Professional 4K, All-In-One VC Camera bar, extension TABLE MIC, AI face tracking and auto zooming 126 4K, 12x Optical,5x Digital, Total 60x Zoom, Professional PTZ VC Camera:-Built-In Microphone Array, Speaker Tracking. 127 Full HD, 20x Optical, Professional PTZ VC Camera. 128 Outdoor Active LED Video wall with Pixel Pitch of 4mm, MS Cabinets, Receiving Cards and Control Processor. 129 Supply and Fixing of following UHF WIRELESS CONFERENCE MIKE SYSTEM including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 130 UHF Wireless WAP access point ( Supports both Audio system and Camera system ) 131 Supply and Fixing of following OUTDOOR PA SYSTEM including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 132 Supply and fixing of IP Speaker Outdoor 133 Supply and fixing IP Server , Broad Cast 134 Supply and fixing IP Phone 135 Supply and Fixing of following OUTDOOR PARKING SOLUTION including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 136 Supply and fixing of AI Camera for Parking Availability 137 Supply and fixing of LED Display for Vehicle Availability 138 Supply and fixing of 55 4K UHD for Parking availability with connecting Cable 139 Supply and fixing of Work Station at Security Room 140 Supply and Fixing of following INDOOR SURVEILLANCE including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 141 Supply and fixing of CAT6 INDOOR CABLE including labour cost 142 Supply and fixing of 25.4mm pipe for cable laying including labour cost 143 Supplyandfixingof 3Core4SqmmArmourdCable includinglabour cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 144 Supply and Fixing of following IINDOOR PA SYSTEM including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 145 Supply and fixing of 15W Speaker Indoor 146 Supply and fixing of 120W Mixer Amplifier 147 Supply and fixing of240W Power Amplifier 148 Supply and fixing ofCordless Mic UHF 149 Supply and fixing of2 Core 1.5 Sqmm with neatly finishing 150 Supply and fixing of 25.4mm pipe for cable laying including labour cost 151 Supply and Fixing of followingAnalog to IP Module including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 152 Indoor system 153 Outdoor system 154 INDOOR CONTROL ROOM 155 Supplyandinstallationof2TonA/CwithSteblizer& Accessoriesincludingmaterialconveyance,labour complete as per engineer incharge 156 GST amount as applicable (18 %)
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
29.
Science and Technology #11440503 Technical Bid
Tender for Earth Work , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, For All Lift, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.All Kinds Of Soil. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 And For All Lif. , Excavating, Supplying, Stacking And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Foundation Trenches, Plinth, Sides Of Foundation Etc. Complete For All Lift. , Cement Concrete (Cast In Situ) , Providing And Laying In Position Excluding Cement Concrete Of Level: Specified Grade The Cost Of Centering And Shuttering - All Work Up To Plinth 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Ill) Derived From Natural Sources: 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Sunken Floor Etc., Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering And Finishing: 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Ill) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Suspended Floors, Roofs, Landings, Balconies And Access Platform , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Columns, Pillars, Piers, Abutments, Posts And Struts , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement.All Works Upto Plinth Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement.All Works Above Plinth Level Upto Floor V Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Stone Work , Coursed Rubble Masonry (Second Sort) With Hard Stone In Foundation & Plinth With :Cement Mortar 1:6(1 Cement : 6 Coarse Sand) , Cladding Work , Providing Edge Moulding To 18Mm Thick Marble Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge,Granite Work , Wood And P. V. C. Work , Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately).Sal Wood , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Providing 40X5 Mm Flat Iron Hold Fast 400 Mm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 300X100x150 Mm 1:3:6 Mix (1 Cement: 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size). , Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. , Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm), With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. , Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper , Providing And Fixing Factory Made Upvc Glazed/Wire Mesh Windows/ Doors Comprising Of Lead Free Upvc Multi-Chambered Frame, Sash And Mullion/Coupler (Where Ever Required) Extruded Profiles Having Minimum Wall Thickness Of 1.70 Mm For Series R1 And R2 Profiles And 2.10 Mm For Series R3 And R4 Profiles Conforming To En: 12608 In Any Shape, Colour And Design Duly Reinforced With Galvanized Mild Steel Section Made Of Required Shape & Size As Per Cpwd Specification, Upvc Extruded Glazing Beads, Interlocks And Lnline Sash Adaptor (Where Ever Required) Of Appropriate Dimension, Epdm Gasket, Hardware, Ss 304 Grade Fasteners Of Minimum 8 Mm Dia With Countersunk Head, Comprising Of Matching Polyamide Pa6 Grade Sleeve For Fixing Frame To Finished Wall As Per Is 1367 : Part 1 To 14, Plastic Packers, Plastic Caps And Necessary Stainless Steel Screws Etc. Profile Of Frame, Sash & Mullion (If Required) Shall Be Mitred Cut And Fusion Welded/Mechanically Jointed Duly Sealed At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealant Over Backer Rod Of Approved Size And Quality, All Complete As Per Approved Drawing Conforming To Cpwd Specification & Direction Of Engineer-In-Charge. Section Of Steel Reinforcement And Cross Sections Of Upvc Profiles To Be As Per Design Approved By Engineer-In-Charge. Wire Mesh / Glazing Of Plain/ Toughened/ Laminated/ Double Glass Unit With / Without High Performance Coatings As Per Design Requirements And Conforming To Is: 3548 & Is: 16231 Shall Be Paid Separately. Note:- Structural Design Proof Checked From A Government Engineering Institute, To Be Provided By The Manufacturer For (I) Sites With Basic Wind Speed 45 M/Sec As Per Is 875 - Part 3 (Ii) Sites With Structure Height More Than 20M For All Wind Speedscasement Window Double Panels With Fixed Mullion With S.S. 304 Friction Hinges As Per Size And Weight Of Sash, Multi-Point Locking System, Zinc Alloy (Zamak) Powder Coated Handles.Using R2 Series With Frame (39 Mm & Above) X (39 Mm & Above) & Sash (39 Mm & Above) X (60 Mm & Above) & Mullion (39 Mm & Above) X (60 Mm & Above). (Height Upto 1.2 Metre). , Steel Work , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Hot Finished Welded Type Tubes , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works , Flooring , Providing And Laying Vitrified Tiles In Floor In Diferent Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) Jointing With Grey Cement Slurry @3.3 Kg/Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc. The Tiles Must Be Cut With The Zero Chipping Diamond Cutter Only . Laying Of Tiles Will Be Done With The Notch Trowel, Plier, Wedge, Clips Of Required Thickness, Leveling System And Rubber Mallet For Placing The Tiles Gently And Easily.Double Charge Vitrified Tile Polished Finish Of Size Of Tile 600 X 600 Mm , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge :Flamed Finish Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. , Finishing , 20 Mm Cement Plaster Of Mix:1:4(1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix:1:4(1 Cement: 4 Coarse Sand) , 6 Mm Cement Plaster 1:3 (1 Cement: 3 Fine Sand) Finished With A Floating Coat Of Neat Cement And Thick Coat Of Lime Wash On Top Of Walls When Dry For Bearing Of Reinforced Cement Concrete Slabs And Beams. , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , 12 Mm Thick Plain Cement Mortar Bands In Cement Mortar 1:4 (1 Cement: 4 Fine Sand):Moulded Band , Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work (Two Or More Coats Applied @ 1.43 Itr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm) , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade :Two Or More Coats On New Work , French Spirit Polishing :Two Or More Coats On New Works Including A Coat Of Wood Filler , Wall Painting With Acrylic Emulsion Paint, Having Voc (Volatile Organic Compound ) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats , Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc (Volatile Organic Compound ) Content.With Water Thinnable Cement Primer On Wall Surface Having Voc Content Less Than 50 Grams/Litre , Dismantling And Demolishing , Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge.Nominal Concrete 1:3:6 Or Richer Mix (Including Equivalent Design Mix) , Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. , Aluminium Work , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item):With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Filling The Gap In Between Aluminium Frame & Adjacent Rcc/ Brick/ Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete.Upto 5 Mm Depth And 5 Mm Width , Market Rate Items , Provinding Precast Cement Concrete Solid Block Masonry Including Hoisting And Setting In Position With Cement Mortar 1:6 (Cement :6 Coarse Sand) Completed As Per The Direction Of Engineer In Charge As Per Site Condition , Providing And Fixing 5 Mm Thick Clear Transparent Acrylic Sheet Of Approved Brand And Manufacture For Fixed Curved Portions In Openings, Including Epdm Rubber/Neoprene Gasket And All Necessary Accessories, Complete In All Respects As Per The Directions Of The Engineer-In-Charge. , Electrical Work , Laying And Fixing Of One No Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Upto 35 Sq.Mm (Clamped With 1Mm Thick Saddle) Size On Wall Surface As Required. , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For 4 X 16 Sq. Mm (25Mm) Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. , Supplying And Fixing Of 4 Way (4 + 12), Double Door Surface/ Recess Mounting, Vertical Type, 415 V, Tpn Mcb Distribution Board Of Sheet Steel, Dust Protected, Duly Powder Painted, Inclusive Of 200 A Tinned Copper Bus Bar, Common Neutral Link, Earth Bar, Din Bar For Mounting Mcbs As Required . , Supplying And Fixing 6 Way, Double Door, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator. , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole And Neutral , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Triple Pole , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Triple Pole And Neutral , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.4 X 6 Sq. Mm + 2 X 6 Sq. Mm Earth Wire , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 2 Module (75Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 3 Module (100Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 6 Module (200Mmx125mm) , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 5/6 A Switch , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 15/16 A Switch , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 3 Pin 5/6 A Socket Outlet , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 6 Pin 15/16 A Socket Outlet , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Bell Push , 2M Stepped Type Electronic Fan Regulator , Wiring For Light Point/Fan Point/Exhaust Fan Point/Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Group Controlled (Looped) Light Point/ Fanpoint/ Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit,And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. (Group-C) , Providing And Fixing 6 Swg Dia G.I Wire On Surface Or In Recess For Loop Earthing As Required. , Supplying, Installation, Testing & Commissioning Of Photo Electronic Smoke Detector With Builtin Led And Mounting Base Plate Suitable With Ms Junction Box For Operation On 12V / 24V Complete With All Connections Etc. As Required. , Supplying, Installation, Testing & Commissioning Of Manual Call Box Of Abs Type In Surface/Recess With Stainless Steel Chain & Hammer Assembly Complete With Glass And Push Button Etc. As Required. , Supplying & Laying Of 2 X 1.5 Sqmm Fire Alarm Armoured Cable, 600/1000V Rated With Annealed Copper Conductor Having Xlpe Insulation, Steel Wire Armouring & Frls Outer Sheath Complete As Required. , Supplying And Fixing Dp Sheet Steel Enclosure On Surface / Recess Along With Upto 32A, 240 V, C Curve Dp Mcb Complete With Connections, Testing And Commissioning Etc. As Required. , Supplying And Fixing 30 A, 415 V, Tpn Industrial Type Socket Outlet, With 4 Pole And Earth, Metal Enclosed Plug Top Alongwith 32 A C Curve, Tpmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required , Supplying And Fixing 20 A, 240 V, Spn Industrial Type Socket Outlet, With 2 Pole And Earth, Metal Enclosed Plug Top Alongwith 20 A C Curve, Spmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required , Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep,Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cmm/W) Minimum 6.85, Air Delivery Minimum 215 Cmm, 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Speed Control Compitable For Electronic Type Regulator And All Remaining Accessories Including Safety Pin,Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Including Fixing Fan Hook In Ceiling Complete As Required. , Supplying, Installation, Testing & Commissioning Of Panel Light 2X2 Ft.,40W Of Powder Coated Die Cast / Extruded Aluminium Body (Thickness ≥ 1.20 Mm) Body Material And Construction As Per Is : 10322 With Driver As Per The Requirement With Driver Efficiency 85%, Operating Voltage Ac 140 270 Volt, Freq 50/60 Hz, Operating Temp Range -15 Deg To 40 Deg Centigrade, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection, Thd 10% , P. F.≥0.95, Ip20, Cri 80, Ugr (Unified Glare Rating) 19, Flicker Free, (Flicker Should Be Below 5 %), Life Time (Led,Driver & Electrical Circuitry), Of Minimum 50000 Burning Hours With, 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11Report, Cct 5700°K (As Per Ansi Bin), Sdcm(Standard Deviation Color Matching) 3, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard And Trade Mark Certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing. Complete In All Respect I/C Connections With 1.5 Sq Mm Frls, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required. System Lumen Efficacy ≥105 Lm/Watt Output . Lm79 & Lm80 Test Report From Nabl Lab For All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. , Supplying And Fixing Of 25Mm Size Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. , Supplying And Drawing 1 Run Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. , Supplying And Installing 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness Size Of Perforated Painted With Powder Coating M.S. Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended/Surface Mount From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. , Supplying And Installing 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness Size Of Perforated Painted With Powder Coating M.S. Cable Trays Bends With Perforation Not More Than 17.5%,, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. , Supplying And Fixing Call Bell/ Buzzer Suitable For Single Phase, 230 V, Complete As Required. , Supplying And Fixing Fp Mcb Sheet Steel Enclosure With Din Rail On Surface / Recess Etc. As Required. , Supplying & Fixing Of 4Pole, 63 A Rating, 415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,4C X 16Sq.Mm, Aluminium , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,4C X 6Sq.Mm, Copper , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,3C X 4 Sq.Mm, Copper , Supply And Laying Of Un Armoured Copper Single Core 10 Sq.Mm Flexible Cable With Annealed Copper Conductor In Suitable Size Hdpe Pipe In Ground/ On Surface As Required. , Supplying And Making End Termination With Brass Compression Gland And Copper Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Copper Conductor Cable Of 1.1 Kv Grade As Required.4 X 6 Sq.Mm , Supplying And Making End Termination With Brass Compression Gland And Copper Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Copper Conductor Cable Of 1.1 Kv Grade As Required.3 X 4 Sq.Mm , Supply ,Installation, Testing And Commissioning Of 2 Tr/24000Btu Per Hour And Bee-5 Star Rated Wall Mounted Inverter Type Hi Wall Split Cooling Air Conditioner Having Wireless Remote Controller, Hermetically Sealed/Scroll/Rotary Compressor And Eco Friendly Refrigerant,Initial Charge Of Refrigerant,Condensor And Evaporator Coils Of Copper Material, Air Filter With Auto Swing & Auto Restart Features, Suitable For Operation On 230V, Single Phase, 50Hz, Ac Power Supply. The Indoor Unit Shall Be Fixed Rigidly On Wall Using Necessary Frame, The Outdoor Unit Shall Be Mounted On Wall Or Floor Using Suitable Powder Coated Ms Angle Frame As Required. Including Clamps, Bolts, Nuts,Vibrating Dampers, Laying Of 3 Meter Standard Length Of Copper Refrigerant Piping With 3 Meter Pvc Covering Pipe, 3 Meter Drain Piping, Wrapping Tape And Necessary Insulation ,Electrical Flexible Cable Connectivity Between Indoor And Outdoor Unit. Necessary Drilling Of Hole And Finishing The Same To Match For The Surrounding As Required. , Supplying And Fixing Of Frp Box 200Mmx140mmx95mm Size (Nominal Size) On Surface With Hinged Door With Suitable Grounding Copper Bar Link With Holes Fitted Inside The Box Etc. As Required. , Supplying And Fixing Of Dual Rj 45 / Io Outlet On Existing Modular Switch Plate. , Supply,Installation,Testing And Commissioning Of Maintenace Free Earth Pit Of Single Pipe Technology Copper Pipe Of 2000Mm Long (Min), Outer Dia 50 Mm, Wall Thickness 1.2Mm(Min), Filled With Highly Conducting Metallic Compounds With The Permanent Sealing At Both The Ends And Lead Terminal Of 50 X 10 Mm Size At The Top The Length Of The Electrode Shall Be 2000 Mm Excluding The Lead Terminal And The Length Of The Lead Terminal At The Top Shall Be Minimum 50Mm. To Ensure The Moisture Content And Electrical Conductivity, Resistance Lowering Grounding Minerals Shall Be Filled Around The Electrode Of (Min25 Kg) .Heavy Duty Weather Proof Plastic Earth Pit Chamber With Cover Of Dimension 300 Mm Dia (Top), 260 Mm Dia(Bottom) And 300 Mm (Height) Shall Be Used, Numbering Of Pit And Measured Value Written With Weather Proof Painting Or Stickering. As Required.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
30.
Drinking Water Supply and Sanitation #11440415 Technical Bid
Tender For Providing Interlock Paver Block With Strom Water Drain At E3 Roadin Aruppukottai Municipality.; 1 Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum 2 Supplying and filling in foundation andbasement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. 3 Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 4 Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 5 Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard 6 Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. 7 Supplying and laying Rubberised interlocking Paver blockM40 grade Providing and laying of83mmthick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, sand cushion 50mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. 8 Plastering with cement mortar 1:4 (One Part of Cement and Four part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309)
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
32.
Public Administrative Department #11437950 Technical Bid
Tender for Fixation Of Local Market Rate For Implementation Of Different Scheme Under Mgnrega Under Rajnagar Development Block. , Hire Charges Of Concrete Mixer With Fuel 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller With Fuel- 8 To 10 Tonne , Vibrator With Fuel (Needle Type 40 Mm) , Surface Vibrator With Fuel , Water Tanker 5000 Ltr. Capacity , Coolie , Fitter(Grade1) , Technician , Helper (Technician) , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Brick Aggregate (Single Size):50 Mm Nominal Size , Brick Aggregate (Single Size):40 Mm Nominal Size , Stone Aggregate(Single Size):63 Mm Nominal Size , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Stone Aggregate(Single Size): 06 Mm Nominal Size , Coal Tar , Portland Cement , White Cement , Coal (Steam) , Brass 150 Mm Floor Door Stopper (0.357 Kg) , Chromium Plated Brass Mortice Latch And Lock 100X65 Mm With 6 Levers And A Pair Of Brass Lever Handles , Unslaked Lime , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm/Liitre , Ready Mixed Pink Or Grey Primer On Wood Work(Hard And Softwood) Having Voc Content Less Than 50 Gms/Litre , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , Moorum , Black Japan , Synthetic Enamel Paint In Black Or Chocolate Shade , Superior Copal Varnish , Green Or Blue Medium Shade Pigment , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , Galvanised Steel Plain Sheets , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , Galvanised Steel J Or L Hooks 8 Mm Dia , G.I Limpet Washer , Bitumen Washer , G.I. Plain Washer For Seam Bolts , Water Proofing Materials , Welding By Electric Plant , Wire Mesh (Rabbit) , Diesel Oil , C.I. Grating 100X100 Mm , Mirror Of Superior Make Glass 60X45 Cm , Vitreous China Pedestal For Wash Basin , Gi Pipes 15 Mm Dia , Gi Pipes 20 Mm Dia , Gi Pipes 25 Mm Dia , Gi Pipes 32 Mm Dia , Gi Pipes 40Mm Dia , Gi Pipes 50 Mm Dia , Gi Pipes 65 Mm Dia , Gi Pipes 80 Mm Dia , Slotted Cowl 75 Mm , Slotted Cowl 110 Mm , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Reinforced Cement Concrete Pipes Np2 Class 300 Mm Dia , Reinforced Cement Concrete Pipes Np2 Class 450 Mm Dia , White Plastic Seat (Solid) With Lid C.P. Brass Hinges And Rubber Buffers , Shower Rose C.P Brass For 15 To 20 Mm Inner 100 Mm Dia , Shower Rose C.P.Brass For 15 To 20 Mm Inner 150 Mm Dia , Vitreous China Squatting Plate , Ball Valve 15 Mm Dia , Ball Valve 20 Mm Dia , Ball Valve 25 Mm Dia , Brass Full Way Valve With C.I. Wheel (Screwed End) 20 Mm Dia , Vitreous China Flat Back Wash Basin 630X450 Mm , Vitreous China Angle Back Wash Basin 400X400 Mm , Vitreous China Foot Rest 275Mmx125mmx25mm , Carriage Of Steam Coal , Carriage Of Stone Aggregate Below 40 Mm Nominal Size , Carriage Of Steel , Carriage Of Stone Aggregate 40 Mm Nominal Size And Above , Carriage Of Tar Bitumen , Carriage Of Soling Stone & Masonry Stone , Carriage Of Carriage Of Moorum , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Float Glass Sheet Of Nominla Thickness 5.5 Mm (Weight Not Less Than 13.50 Kg/ Sqm) , Float Glass Sheet Of Nominal Thickness 8 Mm (Weight Not Less Than 20.00 Kg/Sqm) , Anodised Aluminium Hanging Type Door Stopper , Carriage Of Cost Of Neelgiri/Maxican Grass Truf Sqm , Galvanised Steel Corrugated Sheets , Vitreous China Flat Back Wash Basin 550X400 Mm , Stainless Steel Bolts /Square Bar And Plates , Mild Steel Tubes Hot Finished Seamless Type , Red Oxide Zinc Chromate Primer , Vitreous China Flat Back Wash Basin 450X300 Mm , Hydraulic Door Closer Tubular Type Aluminium Section Body , Oxidised M.S. Casement Stay (Straight Peg Type) 300 Mm Not Less Than 0.33 Kg , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) P Trap , Circular Shape 450 Mm Dia Precast Reinforced Cement Concrete Manhole Cover With Frame L.D. -25 , Upvc Pipes (Working Pressure 4 Kg /Cm2 ) Single Socketed Pipe 75 Mm Dia , Supply Of Upvc Pipe 110 Mm Dia , Supply Of Upvc Plain Tee 75 Mm Dia , Supply Of Upvc Plain Tee 110 Mm Dia , Supply Of Upvc Door Tee 75 Mm Dia , Supply Of Upvc Door Tee 110 Mm Dia , Supply Of Upvc 87.5* Bend 75 Mm Dia , Supply Of Upvc 87.5* Bend 110 Mm Dia , Upvc Pipe Clip 75 Mm , Upvc Pipe Clip 110 Mm , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement , C.P.Brass Bibcock 15 Mm , C.P. Brass Long Body Bibcock 15 Mm , Chromium Plated Concealed Stop Cock , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , White Vitreous China Clay Half Stall Urinal Flat Back 580X380x350 Mm Or Angle Back 450X375x350 Mm With Waste Fittings As Per Is: 2556 , 15 Mm Ptmt Bib Cock , Ptmt Pillar Cock , Ptmt Push Cock 15 Mm , Ptmt - Liquid Soap Container Of 400 Ml Capacity , Ptmt - Soap Dish/Holder 138X102x75 Mm , Coloured Inter Locking cement concrete Paver Block , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Rectified - Ceramic Glazed Tiles Ist Quality 300 X 300 Mm Or More In All Shades Designs White, Ivory, Grey, Fume Red Brown Etc , Adhesive Solvent Cement , Geotextile 120 Gram Per Sqm Membrane , Acrylic Exterior Paint , Vitrified Floor Tile 60X60 Cm , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 25 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 32 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 40 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 50 Mm Outer Dia , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Carriage , G I Wire , Paddy Straw , Nylon Net , 1St Class Picked Jhama Bricks(Traditional) , Stone Boulder( 225 Mm Above ) , Stone Boulder ( 225Mm-150Mm ) , Laterite Boulder , Fine Sand , Medium Sand , Coarse Sand , Bamboo (8Cm-10Cm Dia) Including Fixing , Eucalyptus Bullah (7.5Cm -10Cm Dia) , Eucalyptus Bullah (12.5Cm -15Cm Dia) , Eucalyptus Bullah (17.5Cm -20Cm Dia) , Sal Bullah (7.5Cm -10Cm Dia) , Sal Bullah (12.5Cm -15Cm Dia) , Sal Bullah (17.5Cm -20Cm Dia) , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) With Prop Including All Fittings , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) Without Prop Including All Fittings , Hire Charges Of Shuttering Plank (Above 30Mm-37Mm Thick) With Prop Including All Fittings , Hire Charges Of 5 Kva Generator , Hire Charges Of 3 Kva Generator , Hire Charges Of Monkey Set , Loading Unloading & Stacking Sand/ Stone Aggregate (Less Than 40Mm Nominal Size) , Loading Unloading & Stacking Stone Aggregate (Above 40Mm Nominal Size) , Loading Unloading & Stacking Lime, Moorum, Building Rubish And Similar Miscellaneous Material , Stone Screening Type A (13.2 Mm) , Stone Screening Type B (11.2Mm) , 1St Class Traditional Bricks (Kiln Burnt) , River Bed Material 40 Mm Down , Tor Steel Rods/Hysd Bars/Tmt Bars (Sail/Tata/Rinl) (Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars (Other Than Sail/Tata/Rinl/Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Loading, Unloading And Stacking By Manual Means Of Steel , Sal Silliguri , Sal Malaysia , Neem Wood , Other Local Wood , Ordinary Teak Wood , Sisu/Gamar Wood , Local Sal Wood , Bright Finished Or Black Enamelled Mild Steel Screws 40 Mm , Bright Finished Or Black Enamelled Mild Steel Screws 20 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x 1.50 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x 1.70 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x 1.90 Mm , Coal Tarring , Fan Hook , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Upto 0.10 Sq.M. Area , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Above 0.10 Sq.M. Area , Udaypur Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Udaypur Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Frp Composite Door Frame 66Mm X 70Mm , Frp Composite Door Frame 66Mm X 90Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) S Trap , 32 Mm Dia Polythene Flush Pipe , 18 Mm Thick Marble Partition Slab For Urinals Including Fitting Fixing (With Chawk Doongri Marble) , Gi Pipe 32 Mm Dia Medium Quality For Underground Works , Gi Pipe 40 Mm Dia Medium Quality For Underground Works , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (15 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (20 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (25 Mm Dia) [For Concealed Work] , Thermocol 12.5 Mm Thick. , Chromium Plated Stop Cock (Equivalent To Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Angular Stop Cock With Wall Flange (Equivalent To Code No. 5053 & Model - Florentine Of Jaquar Or Similar Brand). , Polythene Bib Cock / Stop Cock (Hd) With Metal/Plastic Inlet (Emco / Atlas Or Equivalent) , Sink 630 Mm X 550 Mm X 180 Mm With Waste Fittings And Two Coats Of Painting Of C.I. Brackets , Supplying, Fitting And Fixing Pillar Cock Of Approved Make.Cp Pillar Cock - 15 Mm. (Equivalent To Code No. 507 & Model Tropical / Sumthing Special Of Essco Or Similar Brand). , 15 Mm Swan Neck Tap With Left & Right Hand Operating Nob With Aerator (Equivalent To Code No. 510, 510(A) And Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Structural Members Of Specified Sections Weighing Less Than -22.5 Kg./M (E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp (6)- 1964) , Structural Works In Roof Trusses Etc. Using Joists, Channels And Angles Of Specified Section (Conforming To Is: 226, Is: 808 & Sp (6)- 1964) Weighing Less Than 22.5 Kg/ M , M.S. Structural Works In Roof Trusses With Tubular Sections Conforming To Is: 806-1968 & Is: 1161- 1998 (Trusses Spanning Up To 12.00 M) , M.S. Structural With Hollow Sections (Square Or Rectangular Shape) Conforming To Is: 806-1968 & Is:1161-1998) Span Up To 12 Mtr , P.V.C. Connector 15 Mm Dia 600 Mm Long , Polythene Waste Fittings Complete 32Mm , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps 900 Mm Long , Fly Ash Bricks(Traditional) , Iron Hasp Bolt 250Mm Long , Iron Door Ring 50Mm Dia , Iron Catch Hook 6Mm Dia 225Mm Long , M.S Clamps 40Mm X 6Mm, 125Mm Length , Anodised Aluminium Barrel / Tower / Socket Bolt 150Mm Long X 10Mm Dia. Bolt. , Anodised Aluminium Barrel / Tower / Socket Bolt 300Mm Long X 10Mm Dia. Bolt. , Anodised Aliminium D-Type Handle Continuous Plate Base (Hexagonal/ Round Rod) 150 Mm Grip X 10 Mm Dia Rod , Towel Rail (Cp Over Brass )- 600 Mm , Collapsible Gate , Steel Railing , Ms Integrated Grill For Steel Window And Ventillator , 1.5 Mm Thick Ms Sheet , Ci Manhole Cover 450 Mm Dia , C.P. Over Brass Waste Fittings 32 Mm , Malayasia Sal Cleat , Two Point Nose Steel Handle , Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizotal Glazing Bars. , Top Hung Side Hung Ventillator , Fixed Type Ventilators As Per I.S. Sizes With Horizontal Glazing Bars Height Being Limited To 580 Mm , C.P. Over Brass Waste Fittings 32 Mm , Empty Gunny Bag , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps900 Mm Long , Waste Pipe With Pvc Coupling 750 Mm Long , False Ceiling (With 4Mm Thick Pearl Designer Fibre Cement Board) , False Ceiling (With 6Mm Thick Fibre Cement Designer Board) , Supplying, Fitting & Fixing Asbestos Corrugated Sheet(6 Mm Thick) , Supplying, Fitting & Fixing Asbestos Ridging , Supplying, Fitting & Fixing Zn-Al Alloy Steel Sheet Work In Roof , Supplying, Fitting & Fixing Aluminium Sheet Ridging , Fitting And Fixing Glass Reinforced Polyester Translucent Fiber Glass Sheet , Fitting And Fixing Glass Reinforced Polyester Translucent Ridging 1.6 Mm Thick Shhet , Fitting & Fixing Circular Corrugated Aluminium Sheet , Supplying,Fitting & Fixing Of 2-Track / 3-Track Aluminium Sliding Window , Supplying, Fitting & Fixing Of Partly Glazed Partly Paneled Or Fully Glazed Single Leaf Aluminium Swing Door , Supplying, Fitting & Fixing Of Aluminium Fixed Partition Wall Of All Aluminium Sections , Upvc Plain Y 75 Mm Dia , Upvc Plain Y 110 Mm Dia , Supplying Solid Flush Type Doors Of Commercial Quality , Supplying Fitting And Fixing Of Bitumen Drum Sheet Including Nails For Pilling Or Other Works. , Bitumen Vg-30 , Modular Fly Ash Bricks , Modular Fly Ash Bricks Traditional , Bitumen Emulsion , Precast Cement Concrete Blocks (Nominal Mix. 1:1.5:3 With 20 Mm Down Coarse Aggregate Including Supplying At Site, Laying And Finishing The Top Surface With 1:3 Cement Mortar) , Grade 1 Stone Metal 63 Mm To 45 Mm , Fencing Post 215 Cm 150 Mm X 150 Mm Section At Bottom, 100 Mm X 100 Mm Section At Top With T-Base 300 Mm X 150 Mm X 100 Mm, Having 4 Nos 6 Mm Dia Vertical M.S. Reinforcement And 6 Mm Dia Binders @ 200 Mm Centres, Finished Smooth , Polythene Sheet (150 Gm Per Sqm) , Grill Weighing Above 10 Kg./Sq.Mtr And Up To 16 Kg./Sq. Mtr. , Shower Jet , Corner Urinal , Ci P Trap , Ci S Trap , Porcelain P Trap , Porcelain S Trap , Check Valve 32Mm , Check Valve 40Mm , Check Valve 50Mm , Hire Charges For 5 Hp With Operator,Fuel And Shifting Etc All Charges Complete , Reducing Socket 20Mm X 15Mm , Reducing Socket 25Mm X 20Mm , Reducing Socket 25Mm X 15Mm , Reducing Elbow 20 Mm X 15 Mm , Reducing Elbow 25 Mm X 20 Mm , Silver Sand , Ibs Display Board , Community Display Board
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 4
West Bengal View Result →
Contract Date: Ref. Documents Contract Value : 35.76 Lakh
Government Departments No of Bidders 1
35.
Power #11435744 AOC
Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - 3808647; 3808647; Service Provider - Engaging J.C.B. Machine/Hydraulic Excavator Including Driver And Fuel Charges Complete For Different Works. , Surface Dressing Of The Ground Including Removing Vegetation And Inequalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Upto 50 M And Lift Up To 1.5 M. , Providing And Applying Tack Coat Using Hot Straight Run Bitumen Of Grade Vg - 10, Including Heating The Bitumen, Spraying The Bitumen With Mechanically Operated Spray Unit Fitted On Bitumen Boiler, Cleaning And Preparing The Existing Road Surface As Per Specifications : On W.B.M. @ 0.75 Kg / Sqm . , Providing And Applying Tack Coat Using Hot Straight Run Bitumen Of Grade Vg - 10, Including Heating The Bitumen, Spraying The Bitumenwith Mechanically Operated Spray Unit Fitted On Bitumen Boiler, Cleaning And Preparing The Existing Road Surface As Per Specifications : On Bituminous Surface @ 0.50 Kg / Sqm , 4.0 Cm Premix Carpet Surfacing Including A Tack Coat With Hot Straight Straight Run Bitumen,Including Consolidation With Road Roller Of 6 To 9 Tonne Capacity Etc. Complete(Tack Coat To Be Paid For Separately).With Paving Asphalt Grade Vg-10 Heated And Then Mixed With Solvent At The Rate Of 70 Grms Per Kg Of Asphalt. , Providing And Laying Seal Coat Over Prepared Surface Of Road Withbitumen Heated In Bitumen Boiler Fitted With The Spray Set Sprayingusing 98 Kg Of Bitumen Of Grade Vg - 10 And Blinding Surface With0.90 Cum Of Stone Aggregate Of 6.7 Mm Size (Passing 11.2 Mm Sieveand Retained On 2.36 Mm Sieve) Per 100 Sqm Of Road Surface, Includingrolling And Finishing With Power Road Roller All Complete. , 2.5 Cm Premix Carpet Surfacing With 2.25 Cum And 1.12 Cum Of Stone Chippings Of 13.2 Mm And 11.2 Mm Size Respectively Per 100 Sqm And 52 Kg And 56 Kg Of Hot Bitumen Per Cum Of Stone Chippings Of 13.2 Mm And 11.2 Mm Size Respectively, Including A Tack Coat With Hot Straight Run Bitumen, Including Consolidation With Road Roller Of 6 To 9 Tonne Capacity Etc. Complete (Tack Coat To Be Paid For Separately).With Paving Asphalt Grade Vg - 10 Heated And Then Mixed With Solvent At The Rate Of 70 Grams Per Kg Of Asphalt . , Providing And Laying In Position Cement Concrete Of Specified Gradeexcluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stone Aggregate 40 Mm Nominal Size) , Providing And Laying 60Mm Thick Faciory Made Cement Concreteinterlocking Paver Block Of M -30 Grade Made By Block Makingmachine With Strong Vibratory Compaction, Of Approved Size, Design& Shape, Laid In Required Colour And Pattern Over And Including 50Mmthick Compacted Bed Of Coarse Sand, Filling The Joints With Line Sandetc. All Complete As Per The Direction Of Engineer-In-Charge , Taking Out Existing Cc Interlocking Paver Blocks From Footpath/ Centralverge, Including Removal Of Rubbish Etc., Disposal Of Unserviceablematerial To The Dumping Ground, For Which Payment Shall Be Madeseparately And Stacking Of Serviceable Material Within 50 Metre Leadas Per Direction Of Engineer-In-Charge , Laying Old Cement Cocrete Interlocking Paver Blocks Of Any Design/Shape Laid In Required Line, Level, Curvature, Colour And Pattern Overand Including 50 Mm Thick Compacted Bed Of Coarse Sand, Filling Thejoints With Fine Sand Etc. All Complete As Per The Direction Of Engineer_X0002_In-Charge. (Old Cc Paver Blocks Shall Be Supplied By The Departmentfree Of Cost) , Cartage Of Malwa By Tractor Trolly From Periphery Of Area Cleared Including Cost Of All Labour ,T&P Such As Loading Unloading And Cartage For Proper Completion Of Work. , Supplying And Stacking At Site 53 Mm To 22.4 Mm Size Stone Aggregate , Supplying And Stacking At Site.Moorum. , Laying, Spreading And Compacting Stone Aggregate Of Specified Sizes To Wbm Specifications In Uniform Thickness, Hand Picking, Rolling With 3 Wheeled Road / Vibratory Roller 8-10 Tonne Capacity In Stages To Proper Grade And Camber, Applying And Brooming Requisite Type Of Screening / Binding Material To Fill Up Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density . , Carriage, Laying , Spreading And Compaction Of Coal Boulders From Coal Handling Plant Of Ptpp Including Spreading In Uniform Thickness, Hand Picking, Rolling With Three Wheeled Road /Vibratory Roller 8-10 Tonne In Stages In Proper Grade. , Supplying And Filling In Plinth With Sand Under Floors, Including Watering,Ramming, Consolidating And Dressing Complete. , Providing And Applying 2.5 Mm Thick Road Marking Strips (Retro-Reflective) Of Specified Shade/ Colour Using Hot Thermoplastic Materialby Fully/ Semi Automatic Thermoplastic Paint Applicator Machine Fitted With Profile Shoe, Glass Beads Dispenser, Propane Tank Heater Andprofile Shoe Heater, Driven By Experienced Operator On Road Surfaceincluding Cost Of Material, Labour, T&P, Cleaning The Road Surface Ofall Dirt, Seals, Oil, Grease And Foreign Material Etc. Complete Asper Direction Of Engineer-In-Charge And Accordance With Applicablespecifications. , Providing And Fixing Glow Studs Of Size 100X20 Mm Made Of Heavyduty Body Shall Be Moulded Asa (Acrylic Styrene Acryloretrite ) Orhip (High Impact Polystyrene) Or Abs Having Electronically Weldedmicro- Prismatic Lens With Abrasion Resistant Coating As Approved Byengineer In Charge. The Glow Stud Shall Support A Load Of 13635 Kgtested In Accordance With Astm D4280. The Slope Of Retro- Reflectivesurface Shall Be 35 (+/-5) Degress To Base .The Reflective Panels Onboth Sides With At Least 12 Cm Of Reflective Area Up Each Side. Theluminance Intensity Should Be As Per The Specification And Shall Betested As Described In Astm I: 809 As Recommended In Bs: 873
Contract Date: Ref. Documents Contract Value : 86.83 Lakh
Boards / Undertakings / PSU No of Bidders 3
Uttar Pradesh View Result →
36.
Railways #11433807 AOC
Supply Of Electric Overhead Traveling Crane [Eotc]Electric Overhead Traveling Crane [Eotc],The Cost Of Basic Machine As Per Schedule I. Design, Manufacture, Supply, Installation, Testin G And Commissioning Of Electric Overhead Traveling Crane As Per Special Conditions For M&P Procurement P Art I & Part Ii And Parameters Specified In Schedule-I Conforming To Specification No. Special Conditions For M &P Procurement Bid Document-Part Ii Given In Section V. The Crane Shall Be Double Girder As Specified In Sc Hedule-I. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Any Other Accessory Treated As Concomitant Accessory As Per Schedule I. All Required Items For One Number Of Crane Are To Be Quoted As One Unit Here And All These Quoted Items Break Up Cost T O Be Provided In An Enclosure. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Camc Conditions As Detailed In Special Conditions For M&P Procurement Bid Document-Part Ii. Post Warranty Comprehensive Annual Maintenance Charges (After 2 Year Free Warranty Peri Od) - Firm To Quote Separately For Each Camc Year Ie: Year 1 Tab (For 3Rd Year), Year 2 Tab (For 4Th Year), Year 3 Tab (For 5Th Year),Year 4Th Tab (For 6Th Year), Year 5Th Tab(For 7Th Year). Firm S Hould Quote The Actual Rate Of The Camc In The Bid, Discounted Rate As Per Npv Will Be Generated By The Ireps System For Ranking Purpose. [ Warranty Period: 2 Years, Amc Period: 5 Years, Rate Of Di Scounting: 10 % ] ] At (Location) Cws/C&W/Maq, Sr Karnataka 1.00 Numbers Page 1 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly , Cost Of Spares As Per Schedule-I And Additional Spares And Items As Tendered. All Required Ite Ms For One Number Of Crane Are To Be Quoted As One Unit Here And All These Quoted Items Break Up Cost To Be Provided In An Enclosure. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Maintenance Tools As Per Schedule-I. All Required Items For One Number Of Crane Are T O Be Quoted As One Unit Here And All These Quoted Items Break Up Cost To Be Provided In An Enclosure. [ W Arranty Period: 24 Months After The Date Of Delivery ] ] , The Cost Of Basic Machine As Per Schedule I. Design, Manufacture, Supply, Installation, Testin G And Commissioning Of Electric Overhead Traveling Crane As Per Special Conditions For M&P Procurement P Art I & Part Ii And Parameters Specified In Schedule-I Conforming To Specification No Cofmow/Ir/Eotc/ 2020 , Rev-0. Special Conditions For M&P Procurement Bid Document-Part Ii Given In Section V. The Crane Shall Be Double Girder As Specified In Schedule-I. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Any Other Accessory Treated As Concomitant Accessory As Per Schedule I. All Required Items For One Number Of Crane Are To Be Quoted As One Unit Here And All These Quoted Items Break Up Cost T O Be Provided In An Enclosure. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Camc Conditions As Detailed In Special Conditions For M&P Procurement Bid Document-Part Ii. Post Warranty Comprehensive Annual Maintenance Charges (After 2 Year Free Warranty Peri Od) - Firm To Quote Separately For Each Camc Year Ie: Year 1 Tab (For 3Rd Year), Year 2 Tab (For 4Th Year), Year 3 Tab (For 5Th Year),Year 4Th Tab (For 6Th Year), Year 5Th Tab(For 7Th Year). Firm S Hould Quote The Actual Rate Of The Camc In The Bid, Discounted Rate As Per Npv Will Be Generated By The Ireps System For Ranking Purpose. [ Warranty Period: 2 Years, Amc Period: 5 Years, Rate Of Di Scounting: 10 % ] ] At (Location) Sse/Cnw/Knkd, Sr Kerala 1.00 Numbers 4 651013820022 Essential Non Stock --- Yes Tpi Agency Inr (2) Spares (Y) Cost Of Spares As Per Schedule-I And Additional Spares And Items As Tendered. All Required Ite Ms For One Number Of Crane Are To Be Quoted As One Unit Here And All These Quoted Items Break Up Cost To Be Provided In An Enclosure. [ Warranty Period: 24 Months After The Date Of Delivery ] ] Consignee Sse/Cnw/Knkd, Sr Kerala 1.00 Numbers Product Inspection:Stage 1: Raw Material Inspection (100% Of Po Qty ), Stage 2: Inspection Details Process Inspection (100% Of Po Qty ), Stage 3: Final Product Inspection (100% Of Po Qty ) Page 2 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 5 651013820023 Essential Non Stock --- Yes Tpi Agency Inr (2) Spares (Y) Cost Of Maintenance Tools As Per Schedule-I. All Required Items For One Number Of Crane Are T O Be Quoted As One Unit Here And All These Quoted Items Break Up Cost To Be Provided In An Enclosure. [ W Arranty Period: 24 Months After The Date Of Delivery ] ] Consignee Sse/Cnw/Knkd, Sr Kerala 1.00 Numbers Product Inspection:Stage 1: Raw Material Inspection (100% Of Po Qty ), Stage 2: Inspection Details Process Inspection (100% Of Po Qty ), Stage 3: Final Product Inspection (100% Of Po Qty ) 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply For All Items Completion : Within 400 Days Refer To Para 7 Of Delivery Schedule Chart In Special Conditions For M&P Procurement Bid Document Part - Ii. Payment Terms S.No Description Payment Terms 1 1. 60% Payment: Upon Receipt Of The M&P, Duly Pre-Inspected By A Third-Party Inspection (Tpi) Agency, Receipted At The Site By The Consignee Oï¬Ƒcer In Good Condition And Submission Of A Joint Receipt Note. 2. 20% Intermediate Payment: After Successful Installation And Commissioning And Submission Of A Joint Commissioning Note. 3. Final 20% Payment: After Commissioning Of The M&P At The Consignees End For A Minimum Period Of 30 Days, Upon Submission Of A 10% Warranty Performance Guarantee In The Form Of Bank Guarantee And A Proving Test Certiï¬Cate. Refer To Para 1802 Of Enclosure To The Special Conditions For M&P Procurement Bid Document Part - I. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassiï¬Cation By The Supplier/ Contractor. Standard Governing Conditions S.No Description 1 The Contract Shall Be Governed By 1. Irs Conditions Of Contract - Latest Version (Along With All Correction Slips) Uploaded On The Ireps Website And 2. All Other Terms And Conditions Incorporated In The Sr Tender Conditions - Latest Version Uploaded On Ireps Website. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Supply To Be As Per Tender Speciï¬Cation. Normal Applicable To Yes Yes Allowed (Drawing And Specifications Enclosed) All Bidders (Mandatory) Page 3 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 2 The Bidder Should Have Been Complied The Normal Applicable To Yes Yes Allowed Criteria Deï¬Ned In Para 0500 To 0504 I.E. All Bidders (Mandatory) Qualifying Requirement Of Tenderer, As Detailed In Enclosure To The Special Conditions For M&P Procurement Bid Document Part - I. 3 1) Preferably Manufacturers Should Normal Applicable To Yes Yes Allowed Participate. In Case Of ϬRms Other Than All Bidders (Optional) Oems Participating In The Tender, They Must Submit Tender Speciï¬C Authorization From Oem. 2) Oems Can Authorize And Give Tender Speciï¬C Authorization To Its Agent / Dealers To Quote On Their Behalf Provided The Vendor Takes Full Responsibility For The Quality Of The Material Including Warranty Obligation And The Inspection Of Product Against Railways Order Is Carried Out At The Manufacturers Premises.Please Refer Para 3.4 Of Part-B Of Southern Railway Tender Conditions Attached With This Tender. 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Have You Furnished The Statement Of Normal Applicable To No No Not Allowed Deviations.[Preferably Nil] All Bidders 2 Have You Quoted Delivery Period Correctly Normal Applicable To No No Not Allowed And Precisely. - All Bidders 3 Have You Submitted Authenticated Copy Normal Applicable To No No Not Allowed Of The Document Authorizing The Signatory All Bidders To Submit And Commit On Behalf Of Tenderer? . 4 Tenderers To Acknowledge Having Read Normal Applicable To No No Not Allowed And Also Accept The Tender Conditions For All Bidders Electronic Tenders As Available At Southern Railway Stores Tender Conditions Available Under Mentioned Link. 5 Have You Attached Any Performance Normal Applicable To No No Not Allowed Statements With Your OffEr? For Proof Of All Bidders Supply To Other Railways / Production Units Copy Of Purchase Order, Inspection Certiï¬Cate And Receipt Note / Certiï¬Cate Must Be Uploaded. Non-Submission Of Such Vital Documents May Be Taken As Their Not Having Any Such Past Performance. 6 Please Check Our Website Before Normal Applicable To No No Not Allowed Submitting OffEr, Whether Any All Bidders Corrigendum To The Tender Not- Has Been Issued Or Not. Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 4 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 1 2.0 Earnest Money Deposit (Emd) For Normal Applicable To Yes Yes Not Allowed Stores Tenders:Emd Is Taken To Prove All Bidders Earnestness Of The OffEr On The Part Of The Tenderers. 2.1 Emd Amount Shall Be Mentioned In All Tenders Irrespective Of The Nature Of Tender As Per The Emd Amount Mentioned In Clause 2.3 Below Or As Decided By The Purchaser Under The Policy. There Shall Be No Exemption From Submission Of Emd For Any Tender Or By Any Tenderer, Subject To Provisions Under Clause 10.4.3 Below, Except Following: - (A) (I) Emd Shall Normally Not Be Called Against Tenders With Estimated Value Upto Rs.25 Lakhs (Including Single Tenders, Global Limited Tenders). (Ii) If Considered Necessary, Authority Competent To Issue Tender May Incorporate The Condition To Call For Emd Even In Such Tenders, On Case To Case Basis. (B) Micro & Small Enterprises (Mses) Registered With Agencies Mentioned At Part B Para 15.1 (I) (C) Other Railways And Government Departments In Terms Of Railway Board%U2019s Letter No. 2004/Rs(G)/779/11 Dated 24.07.2007 (D) Indian Ordinance Factories In Terms Of Railway Board%U2019s Letter No.92/Rss(G)/363/1 Dated 08.04.1993 (E) Psus Owned By Ministry Of Railways And Psus For The Group Of Items That Are Manufactured By Them In Terms Of Railway Board%U2019s Letter No.2003/Rs(G)/779/5 Dated 10.09.2004 (F) Vendors Registered With Railways For The Trade Group Of The Item Tendered (G) Vendors Appearing On The Approved Vendor Lists Of Rdso/Pus/Core Subject To Approval Status Being Valid On The Date Of Tender Closing (H) Vendors Registered With Railway For Supply Of Medicine, Medical Equipments And Consumables Shall Be Exempted From Submission Of Emd For These Items (I) In Tenders Issued Against Pac, Oem In Whose Favour Pac Has Been Issued Shall Be Exempted From Submitting Emd. Kvic And Acash Shall Be Exempted From Emd For Items Supplied By Them. 2.2 OffErs Submitted Without Emd Shall Be Summarily Rejected. 2.5 Validity Of Emd: Emd Should Remain Valid For A Period Of 45 Days Beyond The ϬNal Bid Validity Period, Which Should Also Be Extended Whenever Bid Validity Is Extended. No Interest Will Be Allowed On Emd. Page 5 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 2 10.0 Security Deposit (Sd) / Performance Normal Applicable To Yes Yes Not Allowed Security For Stores Contracts :- Sd Is All Bidders Taken Towards Security For Due Fulï¬Llment Of The Contract By The Supplier. Security Deposit (Sd) Shall Be 5 % Of Total Value Of Contract And Shall Be Taken From All Vendors For Contract Value Above Rs. 25 Lakh Subject To The Applicable Exemptions. (A) There Shall Be No Exemption From Submission Of Security Deposit (Sd) For Any Tender Or By Any Tenderer Except Following:- (A) The Store Contract Cases Of Value Upto Rs.25 (Twenty ϬVe) Lakh (B) Other Railways And Government Departments In Terms Of Railway Board%U2019s Letter No. 2004/Rs(G)/779/11 Dated 24.07.2007 (C) Indian Ordinance Factories In Terms Of Railway Board%U2019s Letter No.92/Rss(G)/363/1 Dated 08.04.1993 (D) Psus Owned By Ministry Of Railways And Psus For The Group Of Items That Are Manufactured By Them In Terms Of Railway Board%U2019s Letter No.2003/Rs(G)/779/5 Dated 10.09.2004 (E) In Tenders Issued Against Pac, Oem In Whose Favour Pac Has Been Issued Shall Be Exempted From Submitting Sd. Kvic And Acash Shall Be Exempted From Sd For Items Supplied By Them. (F) Vendors Registered With Railways For The Trade Group Of The Item Tendered Shall Be Exempted From Sd For Orders Valued Upto Their Monetary Limit Of Registration. (G) Vendors Appearing On The Approved Vendor Lists Of Rdso/Pus/Core Subject To Approval Status Being Valid On The Date Of Tender Closing (H) Vendors Registered With Railway For Supply Of Medicine, Medical Equipments And Consumables Shall Be Exempted From Submission Of Sd For These Items. Note: Apart From Claiming Damages From Vendors, In Case Of Failure To Comply With The Contractual Obligations, Railways Shall Record Poor Performance Of The Vendors For Taking Suitable Penal Action As Per Extant Instructions. For Complete Details Please Refer 10.0 Part A Of Southern Railway Tender Conditions. 3 10.5 Return Of Security Deposit: -The Sd Normal Applicable To Yes Yes Not Allowed Will Be Refunded To The Supplier After All Bidders Execution Of Contract In All Respects, Against Submissions Of Completion Certiï¬Cate And No Claim Certiï¬Cate Declared By The Consignee Oï¬Ƒcer And Subject To Receipt Of Warranty Performance Guarantee (10% Of Contract Value Towards Warranty Obligations) From The Supplier. 4 1. Goods & Service Tax: Please Refer Part Normal Applicable To Yes No Not Allowed A Para 14.0 Southern Railway Tender All Bidders Conditions. 2. Regarding Mse Purchase Preference Please Refer Clause 15.0 Part B Of Southern Railway Tender Conditions. 3. Preference To Made In India Please Refer Part B Para 16.0 Of Southern Railway Tender Conditions. Page 6 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 5 [A] All The Bidders/Tenderers Should Ensure Normal Applicable To No No Not Allowed That They Are Gst Compliant And Their All Bidders Quoted Tax Structure/Rates Are As Per The Gst Law. Firms Must Indicate Its Gst Registration Number Along With Their Offer. [B] In Case The Successful Tenderer Is Not Liable To Be Registered Under Cgst/Igst/Utgst/Sgst Act, The Railway Shall Deduct The Applicable Gst From His/Their Bills Under Reverse Charge Mechanism (Rcm) And Deposit The Same To The Concerned Tax Authority. [C] The ϬRm Should Indicate The Tariff Code (Hsn Code) For Claiming Gst For The Tendered Item. [D] The OffEr Shall Be Evaluated Based On The Gst Rate As Quoted By Each Bidder And Same Will Be Used For Determining The Inter-Se Ranking. While Submitting OffEr, It Shall Be The Responsibility Of The Bidder To Ensure That They Quote Correct Gst Rate And Hsn Number. [E] It Shall Be The Responsibility Of The Bidders To Quote Correct Hsn Number And Corresponding Gst Rate. The Purchaser Shall Not Be Responsible For Any Misclassiï¬Cation Of Hsn Number Or Incorrect Gst Rate, If Quoted By The Bidder. In Case ϬRm Mis-Classiï¬Es Hsn Code/Gst Rate, Higher Gst, If Any, Due To This Misclassiï¬Cation Shall Be Paid And Borne By The Firm Itself. [F] Wherever, The Successful Bidder Invoices The Goods At Gst Rate Or Hsn Number Which Is DiffErent From That Incorporated In The Purchase Order, Payment Shall Be Made As Per Gst Rate Which Is Lower Of The Gst Rate Incorporated In The Purchase Order Or Billed. [G] Vendor Is Informed That She/He Would Be Required To Adjust Her/His Basic Price To The Extent Required By Higher Tax Bill As Per Invoice To Match The All Inclusive Price As Mentioned In The Purchase Order. [H] Any Amendment To Gst Rate Or Hsn Number In The Contract Shall Be As Per The Contractual Conditions And Statutory Amendments In The Quoted Gst Rate And Hsn Number, Under Svc. [I] Tenderers Should Upload Gst Rate Along With Documentary Evidence, Hsn Code And Full Bank Details Of The ϬRm.Ie Bank Name, Bank Address, Account Number, Ifsc Code & Micr Code Along With The Bid. [J] Firm Should Also Give A Declaration That Any Additional Input Tax Credit Beneï¬T, If Become Available To Supplier, The Same Shall Be Passed On To Purchaser Without Any Undue Delay. Page 7 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 6 (I) In Case Of Mse ϬRm Willing To Claim The Normal Applicable To Yes Yes Not Allowed Beneï¬Ts Under Public Procurement Policy All Bidders (Preference To Mse) Order 2012, The ϬRm Should Upload With Their OffEr, The Proof Of Their Being Mse Registered With The Agency Mentioned In Part B Para 15.0 Of Southern Railway Tender Conditions, Failing Which Such OffErs Will Not Be Liable For Consideration Of Beneï¬Ts (Ii) As Per Gazette Notiï¬Cation No. S.O.4926(E) Dated 18.10.2022 Amending Notiï¬Cation No. S.O.2119(E) Dated 26.06.2020 Circulated Vide Railway Board Letter No. 2020/Rs(G)/363/1 Dated 03.11.2022 Regarding Reclassiï¬Cation Of Enterprises And Udyam Registration, In Case Of An Upward Change In Terms Of Plant And Machinery Or Equipment Or Turnover Or Both, And Consequent Reclassiï¬Cation, An Enterprise Shall Continue To Avail Of All Non-Tax Beneï¬Ts Of The Category It Was In Before The Reclassiï¬Cation, For A Period Of Three Years From The Date Of Such Upward Change. In Such Cases, The Tenderer Claiming Beneï¬Ts Under Mse Category Shall Submit Documentary Evidence O F The Date Of Upgradation To Medium Category Along With OffEr. Such Claims Will Not Be Considered With Out Documentary Evidence (Iii) Tenderers Shall Upload Udyam Registration Detail Showing That The Enterprise Is Owned By Scheduled Castes (Sc)/ Scheduled Tribes (St)/ Women Entrepreneurs To Claim The Beneï¬T Under This Sub Classification. 7 Make In India Preference Policy :- Normal Applicable To Yes Yes Not Allowed Procurement Of The Item Is Restricted To All Bidders Class-I Local Suppliers With Minimum Local Content Of 50% (Class-I Local Supplier As Deï¬Ned In Railway Board Letter No: No.2020/Rs(G)/779/2/Pt.1Dated 25.09.2020) Only And The Vendors Who Do Not Qualify To Be Class-I Local Suppliers (I.E., Non-Local Suppliers Or Class-Ii Local Suppliers With Local Content Less Than 50%) Should Not Quote In The Tender As Their OffErs Shall Not Be Considered For Any Ordering. In Case Any Vendor Who Does Not Qualify To Be A Class-I Local Supplier For The Tendered Item Participates In The Tender, It Does So At Its Own Risk And Cost And Railways Shall Not Be Liable For Any Loss Or Damage Caused To The Vendor Please Enter The Percentage Of Local Content In The Material Being OffEred. Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Condition Page 8 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 8 General Damages At The Rate Of 5% Of The Normal Applicable To Yes Yes Not Allowed Defaulted Contract Order Value Will Be All Bidders Levied In Case Of Failure To Supply The Material After Placement Of Purchase Order, Within The Delivery Period. In Case Of Failure To Comply With The Contractual Obligations, Railways Shall Record Poor Performance Of The Vendors For Taking Suitable Penal Action As Per Extant Instructions. Wherever Sd Has Been Exempted Or Not Applicable For Any Reason Or Is Less Than The General Damages As Indicated Above, And The Supplier Fails To Supply Goods As Per Conditions Of Contract, As Amended From Time To Time, Purchaser Have The Right To Levy Damages From The Supplier For Failing To Comply With Contractual Conditions. These Damages Shall Be Treated As Recoveries Outstanding Against The Vendor And Dealt With Accordingly. 9 Liquidated Damage (L.D): Extension Of Normal Applicable To Yes Yes Not Allowed Delivery Period May Be Considered In All Bidders Deserving Cases Where Genuine Reasons Exist. Such Extensions Of Delivery Period May Be Considered With Liquidated Damages As Per Irs Conditions Of Contract And Denial Clause. Railway Shall Recover From The Contractor As Agreed Liquidated Damages And Not By Way Of Penalty, A Sum Equivalent To 1/2% (Half Percent) Of The Price Of Any Stores (Including Elements Of Taxes, Duties, Freight, Etc) Which The Contractor Has Failed To Deliver Within The Period ϬXed For Delivery In The Contract Or As Extended For Each Week Or Part Of A Week During Which The Delivery Of Such Stores May Be In Arrears Where Delivery Thereof Is Accepted After Expiry Of The Aforesaid Period, Subject To A Maximum Of 10% (Ten Percent) Of The Value Of The Contract Irrespective Of Delays, Unless Otherwise Provided Specifically In The Contract. 10 All Taxes, Freight, Packing, Forwarding & Normal Applicable To No No Not Allowed Other Charges Should Be Quoted In All Bidders Numeric Only @ Financial Tabulation. 11 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being OffEred. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. General Instructions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 9 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 1 (1) As Per Section 171 Of Gst Act 2017, As Normal Applicable To No No Not Allowed A Remedy Against Anti-Proï¬Teering, Input All Bidders Tax Credit Beneï¬T If Any Accrued Should Be Passed On To The Purchaser As Reduction In Basic Price, Or Else The Following Certificate Should Accompany The Bill: It Is Certiï¬Ed That No Input Tax Credit Beneï¬T Has Accrued On Materials Invoiced/Billed For, That Can Be Passed On To Purchaser. B) Firm Should Submit The Invoice/Bill Clearly Indicating The Appropriate Hsn And Applicable Gst Rate Thereon Duly Supported With Documentary Evidence. C) Firm Should Also Give A Declaration That Any Additional Input Tax Credit Beneï¬T, If Become Available To Supplier, The Same Shall Be Passed On To The Purchaser Without Any Undue Delay (2) All The Bidders/ Tenderers Should Ensure That They Are Gst Compliant And Their Quoted Tax Structure / Rates Are As Per Gst Law. In Case The Successful Tenderer Is Not Liable To Be Registered Under Cgst/Gst/Utgst/ Sgst Act, Railway Shall Deduct The Applicable Gst From His / Their Bills Under Reverse Charge Machanisam (Rcm) And Deposit The Same To The Concerned Tax Authority. (3) - 1.Railway Is Not Bound To Accept / Cancel The Lowest Or Any Tender Or To Assign Any Reason For Doing So And Railway Reserves The Right To Accept / Cancel Any Tender In Respect Of The Whole Or Any Portion Of The Items Specified In The Schedule Annexed (Or Tender Schedule) And The Contractor Shall Be Required To Supply The Same At The Rate Quoted. 2.Vendors May Please Note That Giving Intimation Regarding The Tender In Open Tender Cases Or Giving Limited Tender Enquiry Does Not Guarantee The Suitability Of Offer For Placement Of Purchase Order. Railway Reserve The Right To Place Purchase Order Subject To Fulfillment Of Technical / Commercial Eligibility Conditions/ Tender Conditions. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 10 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 1 1) Inspection Is By Appointed Tpi Agency. Normal Applicable To No No Not Allowed There Will Be Three Stages Of Inspection As All Bidders Per Speciï¬Cation And Approved Qap. First Stage - Raw Material Inspection As Per Speciï¬Cation And Approved Qap. Second Stage - In Process Inspection As Per Speciï¬Cation And Approved Qap. Third Stage - Final Product Inspection At Firms Premises As Per Speciï¬Cation And Approved Qap. 2) In Case Of Any Deviation To Inspection, Should Be Clearly Indicated In The Offer. 3) Firm Should Provide Complete Work Address Where Inspection Is To Be Carried Out. 2 The Firm Shall Submit Invoice/Bill Normal Applicable To Yes Yes Not Allowed Clearly Indicating The Appropriate All Bidders Hsn Code And Applicable Gst Rate Thereon Duly Supported With Documentary Evidence. S.Rly. Karnataka Gstn No-29Aaagm0289c1zf 3 Tenderers Shall Conï¬Rm The Following Normal Applicable To Yes Yes Allowed Declaration Failing Which The OffEr Will Be All Bidders (Optional) Ignored. I Have Read The Clause Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India. I Certify That This Bidder Is Not From Such A Country Or, If From Such A Country, Has Been Registered With The Competent Authority. I Hereby Certify That This Bidder Fulï¬Lls All Requirements In This Regard And Is Eligible To Be Considered. Where Applicable, Evidence Of Valid Registration By The Competent Authority Shall Be Attached. Special Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 11 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 1 1) Camc : Bidders To Note That This Is A Normal Applicable To No No Not Allowed Composite Tender For Procurement And All Bidders Post Warranty Comprehensive Annual Maintenance Contract I.E. Camc For 05 Years Beyond 2 Years Warranty Period. Bidders Are Required To Quote Charges For Camc For Post Warranty Period Of Camc For 05 Years. 2) Evaluation Of The Offers Is Based On Group Wise And Ranking Of The Offers For Each Group Of Items Shall Be Arrived Based On Cost Of All Items Within The Group Including Camc Charges For 5 Years [Adjusted To Net Present Value] After Warranty Period Of 2 Years As Per Specification. 3) Firm Should Quote Actual Rate Of Camc In Their OffEr While Quoting The Bid. The Npv Will Be Worked Out At A Discounting Rate Of 10%. The System Will Calculate Net Present Value Of Camc Of OffEr Automatically Based On Which Ranking Will Be Done. Calculation Of Npv Is Only For The Purpose Of ϬNancial Evaluation Of OffEr And Determining The Inter-Se Ranking. Payment Of Camc Charges Will, However, Be As Per Actual Annual Camc Charges Accepted In The Tender. No Advance Payment For Camc Charges Shall Be Made. A) Firms To Quote Camc Charges Separately I.E Year 1 Tab (For 3Rd Year), Year 2 Tab (For 4Th Year) , Year 3 Tab (For 5Th Year) Year 4 Tab (For 6Th Year) Year 5 Tab (For 7Th Year). 2 Bank Guarantee For Camc: : Bank Normal Applicable To No No Not Allowed Guarantee For Camc Is As Detailed In Para All Bidders 17.2.8 Of Enclosure To The Special Conditions For M&P Procurement Bid Document Part - Ii. Page 12 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 3 One Of The Essential Principles Of Normal Applicable To No No Not Allowed Purchasing Function Is Selection Of Right All Bidders Source For Supply. This Aspect Has Been Emphasized By Railway Board Through Various Circulars In The Past Rb Lr No. 2022/Rs(G)777/1(E 3382862) New Delhi Dated 07.07.2022 With Sub: Acceptance Of Tender, Consideration Of Performance Of Vendors. Railway Board Letter Dated 11.02.2016 Interalia Stipulates Due Consideration Of Dis-Satisfactory Past Performance Of Vendors While Deciding Tender To Ensure Timely Supply Of Material In Required Quantity To Meet The Needs Of Operation, Maintenance, Safety, Etc. Of The Railways. With Complete Digitization Of Supply Chain, Suï¬Ƒcient Data Is Available On Ireps/Imms ReflEcting Various Aspects Of Performance Of Suppliers For Individual Contract, Supplier And Item. Warranty Failures And Response Of Vendors To Such Failures Is One Of The Important Parameters Of Performance Of A Vendor. Suitable Means May Be Adopted To Capture Warranty Performance Of The Vendors. It Is Again Emphasized That Performance Of Vendors, Including Warranty Failures And Response, Would Invariably Be Considered While Deciding The Tenders. 4 Tenderers Are Advised To Check Our Normal Applicable To No No Not Allowed Website Before/After Submitting Their OffEr All Bidders Whether Any Corrigendum To The Tender Has Been Issued Or Not. 5 Past Performance By Way Of Complied Pos Normal Applicable To No No Not Allowed Or R/Notes Or Inspection Certiï¬Cates From All Bidders Railways / Production Units Or Other Govt. Departments If Any To Be Uploaded With E- Bid. 6 The Supplier Must Be Responsible To Normal Applicable To No No Not Allowed Replace The Item If It Gets Damaged During All Bidders The Time Of Delivery. 7 (1) Delivery By Road On Door Delivery Normal Applicable To No No Not Allowed Basis. All Bidders (2) Delivery Charges Including Unloading Charges At Destination Are In The Scope Of The Supplier. 8 Consignee Details: Normal Applicable To No No Not Allowed All Bidders 1) Office Of The Senior Section Engineer,Carriage And Wagon, Mangaluru Central Railway Station, Southern Railway, Mangaluru - Karnataka- 575001 Contact Number : 9495559828/ 9731663403 2) Office Of The Sr.Section Engineer , Carriage And Wagon, Manglore Junction , Southern Railway, Karnataka -575007 Contact Number : 9731663409 / 9495559828 Bill Paying Authority: Sr. Divisional Mechanical Engineer Contact Number : 9746763400 Page 13 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 9 Annexure -I : The Tenderers Shall Submit A Normal Applicable To No No Not Allowed Copy Of Certiï¬Cate Stating That All Their All Bidders Statements/Documents Submitted Along With Bid Are True And Factual. Standard Format Of Certiï¬Cate To Be Submitted Along With Bid Are True And Factual. Standard Format Of Certiï¬Cate To Be Submitted By The Bidder Is Enclosed As Annexure -I. Non-Submission Of Above Certificate By The Bidder Shall Result In Summary Rejection Of His/Their Bid. It Shall Be Mandatorily Incumbent Upon The Tenderer To Identify, State And Submit The Supporting Documents Duly Self-Attested/Digitally Signed By Which They/He Is Qualifying The Qualifying Criteria Mentioned In The Tender Document. It Will Not Be Obligatory On The Part Of Tender Committee/Accepting Authority To Scrutinize Beyond The Submitted Document Of Tenderer As Far As His Qualification For The Tender Is Concerned. 10 Deviations: The Tenderer Shall Certify Normal Applicable To No No Not Allowed That The OffEred Stores Fully Meets The All Bidders Speciï¬Cation. Various Design Features Incorporated To Fulï¬Ll DiffErent Technical Performance Requirements Shall Be Fully Explained In The OffEr. However, Minor Deviations From These Speciï¬Cations Which Do Not AffEct Or In Any Way Interfere With The Stipulated Performance Standards Or Would Result In Improved Safety/ Reliability Or Would Reduce Recurring Maintenance/Operating Cost Of The Machine, Can Be Considered For Acceptance Subject To Consignee Oï¬Ƒcer Suitability. The Tenderer In Such Eventuality Shall Clearly Indicate The Details Of These Deviations And Their Implications. 11 In Case Of Delay In Approval Of Gad On Normal Applicable To No No Not Allowed Railway Account, Extension Of Dp As Reï¬X All Bidders Shall Be Dealt With Accordingly. The Design, Manufacture, Supply, Installation, Testing And Commissioning To Be Completed Within The Given Completion Period On Award Of Contract. In Case Supplies Are Required To Be Deferred By Railways Due To Site Conditions Or Any Other Reasons, The Intimation Shall Be Given To All Concerned 15 Days Before The Due Delivery Date To Re-Fix Dp Accordingly. Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 1) Tenderer Should Submit Para Wise Normal Applicable To Yes Yes Allowed Compliance Of Each Speciï¬Cation All Bidders (Mandatory) Parameter Along With OffEr As Per Attached Specifications And Conditions. 2) Tenderer Should Submit Bill Of Material (Bom) Along With The OffEr Duly Indicating Components And Their OffEred Makes As Per Specification. OffErs Submitted Without The Above Will Be Summarily Rejected Considering As Incomplete Offer. Page 14 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 2 1) OffEred Model, Product Normal Applicable To Yes Yes Allowed Brochure/Literature To Be Uploaded For All Bidders (Mandatory) Evaluation. 2) In Case Of Any Deviation To Speciï¬Cation Like In Terms Of Dimension, Capacity, Size And Etc It Should Be Clearly Indicated In The Offer. 3) Railway Reserves The Right Either To Consider Or Not To Consider OffEred Deviations Based On End User Requirement. 3 Tenderers Should Agree To The Normal Applicable To Yes Yes Not Allowed Guarantee/Warranty As Per Speciï¬Cation All Bidders And In Case Speciï¬Cation Does Not Contain Gc/Wc Then Gc/Wc As Per Irs Conditions Of Contract Will Apply. 6. Bidders Shall Confirm And Certify On The Behalf Of The Tenderer Including Its Constituents As Under: S.No. Description 1 I/We The Tenderer (S) Am/Are Signing This Document After Carefully Reading The Contents. 2 I/We The Tenderer(S) Also Accept All The Conditions Of The Tender And Have Signed All The Pages In Confirmation Thereof. I/We Hereby Declare That I/We Have Downloaded The Tender Documents From Indian Railway Website Www.Ireps.Gov.In . I/We Have Verified The Content Of The Document From The Website And There Is No Addition, No Deletion Or No Alteration To The 3 Content Of The Tender Document. In Case Of Any Discrepancy Noticed At Any Stage I.E. Evaluation Of Tenders, Execution Of Contract Or Payment, The Master Copy Available With The Railway Administration Shall Be Final And Binding Upon Me/Us. I/We Declare And Certify That I/We Have Not Made Any Misleading Or False Representation In The Forms, Statements And 4 Attachments In Proof Of The Qualification Requirements. I/We Also Understand That My/Our Offer Will Be Evaluated Based On The Documents/Credentials Submitted Along With The Offer 5 And Same Shall Be Binding Upon Me/Us. I/We Declare That The Information And Documents Submitted Along With The Tender By Me/Us Are Correct And I/We Are Fully 6 Responsible For The Correctness Of The Information And Documents, Submitted By Us. I/We Certify That I/We The Tenderer(S) Is/Are Not Blacklisted Or Debarred By Railways Or Any Other Ministry / Department Of 7 Govt. Of India From Participation In Tender On The Date Of Submission Of Bids, Either In Individual Capacity Or As A Huf/ Member Of The Partnership Firm/Llp/Jv/Society/Trust. I/We Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be Forged/False At Any Time During Process For Evaluation Of Tenders, It Shall Lead To Forfeiture Of The Emd And May Also Lead To Any Other Action Provided In The 8 Contract Including Banning Of Business For A Period Of Upto Two Year. Further, I/We And All My/Our Constituents Understand That My/Our Offer Shall Be Summarily Rejected. I/We Also Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be False/Forged At Any Time After The 9 Award Of The Contract, It Will Lead To Termination Of The Contract, Along With Forfeiture Of Security Deposit And May Also Lead To Any Other Action Provided In The Contract Including Banning Of Business For A Period Of Upto Two Year. I/We Have Read The Clause Regarding Restriction On Procurement From A Bidder Of A Country Which Shares A Land Border With India And Certify That I Am/We Are Not From Such A Country Or, If From Such A Country, Have Been Registered With The 10 Competent Authority. I/We Hereby Certify That I/We Fulfil All The Requirements In This Regard And Am/Are Eligible To Be Considered (Evidence Of Valid Registration By The Competent Authority Is Enclosed) 7. Documents Attached With Tender S.No. Document Name Document Description 1 5538374.Pdf Annexure 1 2 5538377.Pdf Item 651013820010 Drawing 3 5538382.Pdf Item 651013820010 Specification 4 5538384.Pdf Item 651013820010 Speicification Part Ii 5 5538561.Pdf Item 651013820020 Shedule 6 5538544.Pdf Item 651013820020 Drawing 1 7 5538549.Pdf Item 651013820020 Drawing 2 8 5538555.Pdf Item 651013820020 Specification Part 1 9 5538558.Pdf Item 651013820020 Specification Part 2 10 5538432.Pdf Item 651013820010 Schedule The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid Page 15 Of 16 Run Date/Time: 22/10/2025 18:03:36Pgt Div/Southern Rly Tender Document Tender No 91256036 Closing Date/Time 21/11/2025 14:30 This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Cmm-Adrm-Pgt ( S Jayakrishnan ) , Cost Of Spares As Per Schedule-I And Additional Spares And Items As Tendered. All Required Ite Ms For One Number Of Crane Are To Be Quoted As One Unit Here And All These Quoted Items Break Up Cost To Be Provided In An Enclosure. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Cost Of Maintenance Tools As Per Schedule-I. All Required Items For One Number Of Crane Are T O Be Quoted As One Unit Here And All These Quoted Items Break Up Cost To Be Provided In An Enclosure. [ W Arranty Period: 24 Months After The Date Of Delivery ] ]
Contract Date: Jul 01, 2026 Contract Value : 1.26 Crore
Government Departments No of Bidders 1
37.
Educational and Research Institute #11433319 AOC
Procurement Of Tools & Equipment For Newly Established Iti For Girls At Ghatkesar In Medchal Malkajgiri District-25.00 Cost Supply And Delivery Of Cpu: 32 / 64 Bit, 7Th Generation Or Higher, I3 Or Latest Processor, Speed: 3 Ghz Or Higher. Ram: 8 Gb Or Higher, 1Tb Hdd / Sdd, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, With Usb Mouse, Usb Keyboard And Monitor ( As Available In The Market ) . Or All In One Pc Licensed Operating System And Antivirus Compatible With Trade Related Software. Make: Dell. Cost Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of 4Th Gen Ci5 Or Higher Processor, 4Gb Ram, 1Tb Hard Disk, Win8 / Latest Preloaded Licensed Os, 2Gb Graphics Card, Dvd Writer, Standard Ports And Connectors.Make: Dell. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of To Enable Working With Wired Networks For Practical. Make:Finolex. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Broadband Connection With Min. 2 Mbps Speed / Optical Fiber. Make:Optic Fiber. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Registered Domain At Least 100 Mb Web Space. Make: D Link.Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of All In One Printer A4 Size. Make: Hp Laser Jet.Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Dlp Projector With Screen / Multimedia Projector With Screen / Smart Interactive Board / Smart Tv Latest Version. Make:Epson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Online Ups 5Kva. Make: Utl. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply, Delivery, Installation And Testing Of Open Office Or Equivalent Latest Version. Open Source Software : Windows. 1.00 Cost Supply, Delivery, Installation And Testing Of Python / Java Jdk. Latest Version. Open Source Software : Windows. 1.00 Cost Supply, Delivery, Installation And Testing Of Gimp Or Equivalent. Latest Version. Open Source Software: Windows. 1.00 Cost Supply, Delivery, Installation And Testing Of E Commerce Simulation Software.Latest Version. Open Source Software: Windows. 1.00 Cost Supply, Delivery, Installation And Testing Http Web Server / Xampp Or Any Other Similar Server.Open Source Software: Windows. 1.00 Cost Supply, Delivery, Installation And Testing Of My Sql. Latest Version. Open Source Software: Windows. 4.00 Cost Supply And Delivery Of Air Conditioner 2 Ton. Make: Blue Star.Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost For Tools And Eqiupments Of Electronic Mechanic Trade: Cost Supply And Delivery Of Air Conditioner Two Ton Split Ac.Make:Blue Star. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Cro Dual Trace.20 Mhz ( Component Testing Facilities ) . Make: Htc / Varteck. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Battery Charger. 0 - 6 - 9 - 12 - 24 - 48 V, 30 Amp Make:Scientech. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Function Generator Dds Technology Sine Square Triangle Ramp Pulse Serial Data Ttl And Modulation. 1 Mhz -10 Mhz Function- Pulse – Modulation Generator With Built In 40Mhz Frequency Counter.Make:Pacific. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Digital Ic Tester. Dit-02 Make: Krb / Asi / Ssl Make. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply And Delivery Of Power Electronics Trainer With At Least 6 Numbers Of Application Board Mosfet Characteristics Scr Characteristicsscr Lamp Flasher Scr Alarm Circuit Series Inverter Single Phase Pwm Inverter.Electrical Type Make:Ohm. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 3.00 Cost Supply And Delivery Of Desktop Computers. Cpu: 64 Bit I7 8 Th Gen Processor, Speed: 3 Ghz Or Higher. Cache Memory: - Minimum 3 Mb Or Better. Ram:-8 Gb . Hard Disk Drive: 1 Tb 7200 Rpm ( Minimum ) Or Higher, Wi-Fi Enabled On Board Intigrated Wifi . Network Card:Integrated Gigabit Ethernet ( 10 / 100 / 1000 ) - Usb Mouse, Usb Keyboard And Monitor ( Min. 19.5 Inch ) , Standard Ports And Connectors. Dvd Writer, Speakers And Mic. Licensed Windows 10 Pro Operating System Antivirus / Total Security Preferably Hp / Dell / Lenova. Make:Epson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply And Delivery Of Laptop 8 Th Gen I7 Processor, 8Gb Ram, 1Tb Hard Disk, Windows 10 Pro Preloaded Licensed Os, 4Gb Graphics Card, Dvd Writer, Standard Ports And Connectors.Preferably Hp / Dell / Lenova Make:Hp / Dell. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Laser Jet Printer A4 Size.Make:Samsung. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Internet Broad Band Connection 300Mbps.Make:Act / Bsnl / Jio. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Electronic Circuit Simulation Software With 6 User Licenses. Circuit Design And Simulation Software With Pcb Design With Gerber And G Code Generation, 3D View Of Pcb, Breadboard View, Fault Creation And Simulation..Make:Edwin. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Dso Colour. 4 Channel , 50Mhz Real Time Sampling 1G Samples / Sec, 12 Mpts Memory With Pc Interface Usb, Lan And Math Function Includes +, -, Fft, Differential, Integral, Abs, Log Etc.Make:Aet. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Soldering & De Soldering Station.200 Watt Adjustable.Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Frequency Modulator And Demodulator Trainer Kit.Fm Modulator Type : Reactance Modulator, Varactor Modulator, Vco Based Modulator Fm Demodulator Type All 5 Demodulation Techniques Detailed Teaching And Learning Contents Through Software.Make:Ohm. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Pam Ppm Pwm Trainer Kit Pam - Ppm - Pwm Trainer Kit Is A Uses Natural And Flat Top Sampling Techniques For Modulation And Demodulation Process. Features: Pam-Ppm-Pwm M. Make:Ohm. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Am Fm Commercial Radio Receivers Tr105 Portable Radio Support Fm / Am / Sw / Cb / Vhf / Air Radio Make: Krb Make. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Application Kits For Microcontrollers 6 Different Applications One Set 1.Input Interface : 4X4 Matrix Keypad, Ascii Key Pad, Four Input Switch 2. Display Module 16X2 Lcd, Seven Segment, Led Bar Graph 3. Adc / Dac Module With Most Popular Dc / Dac0808 4. Pc Interface: Rs232 & Usb 5. Motor Drive: Dc, Servo, Stepper 6. Daq: Data Acquisition To Sense Different Sensors Signals. Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Sensor Trainer Kit Containing Following Sensors 1 Thermocouple 2 Rtd 3 Load Cell Strain Gauge 4 Lvdt 5 Smoke Detector Sensors 6 Speed Sensor 7 Limit Switch 8 Photo Sensors 9 Optocouplor 10 Proximity Sensor.Graphical Touch Lcd With Inbuilt Processor For Viewing The Output Waveforms, In Built Daq, And Standard Processing Circuits Like Inverting , Non – Inverting , Power, Current , Instrumentation Differential Amplifier, F / V, V / F, V / I, I / V Converter, Sensors :Rtd, Ntc Thermistor, Lm35 Thermocouple, Gas ( Smoke ) Sensor, Load Cell, Lvdt Sensor, Speed Sensor. Make:Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Different Types Of Electronic & Electrical Cables Connectors Sockets And Terminations 1Mm Sqmm Ti 4Mm Sqmm, 3Pin Socket, 5Pin Socket, Terminal Complet Set. Make:Phenolex. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Fiber Optic Communication Trainer Full Duplex Analog & Digital Trans-Receiver With 660Nm & 950Nm, Noise Generator With Variable Gain, Four Seven Segment Display Ber Counter, Eye Pattern Make:Pacific. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Mobile Phone Trainer. 2G / 3G / 4G Dual Sim Gsm Handset.Frequency Measurement And Band Verification. Real Time Mobile Operation Make:Samsung. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply And Delivery Of Smart Phones Of Different Make ( Android / Windows ) Android / Windows Make:Nokia / Samsung. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Lcd Tv ( Trainer Kit ) 21-Inch Full Hd Lcd Color Television Should Support Pal / Ntsc Video Formats Complete Block Diagram Of A Lcd Tv System, Study Board Indicating Various Sections Of Lcd Tv Along With The Test Points And Switch Faults. Make:Sony. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Lcd Tv ( 21 ) Full Hd Telivision. Make:Samsung / Sony. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Led Tv ( Trainer Kit ) 20-Inch Full Hd Led Color Television, Pal / Ntsc Video Formats, Complete Block Diagram Of A Led Tv System, Study Board Indicating Various Sections Of Led Tv Along With The Test Points And Switch Faults Trouble Shooting In Different Sections. Make:Sony. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Solar Training Kit / Simulator With Build In Meters For Dcv Dca Ac Multifunction Meter Frequency Protection Circuits Bs-10 Terminals For Making The Connection Single / Dual Axis Traking System Charge Controller Pwm Based Mppt Charging Stage Bulk Absorptions And Float Make:Trina / Vikram. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Led Lighting System Measurement Of Power, Voltage, Current, Power Factor And Light Output Performance Of Different Lighting Products Like Led, Cfl At Variable Input Voltages 0 To 245V Variable Ac Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Tools And Equipments Of Computer Aided Embroidery And Designing Nsqf: Cost Supply And Delivery Of Over Lock Machine.3 Thread. Make:Juki. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply And Delivery Of Single Head Computerized Embroidery Machine ( Multi Needle ) With Ups Pr1055x. Make:Brother Pr1055x Entrepreneur Pro X Single Head 10 Needle Computer Embroidery Machine. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply, Delivery, Installation And Testing Of Coral Draw Software. 4.00 Cost Supply And Delivery Of Desktop Computer With Ups. Cpu: 32 / 64 Bit I3 / I5 / I7 Or Latestprocessor, Speed: 3 Ghz Or Higher. Ram:-4 Gb Ddr-Iii Or Higher, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, With Usb Mouse, Usb Keyboard And Monitor ( Min. 17 Inch Licensed Operating System And Antivirus Compatible With Trade Related Software. Make:Hp / Dell. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Laptop 12Th Generation Inte Core I5 Prosses0r O S Windos 11 Ho 1920*1080 Intel Me 16 Gb Ram, 512 Gb Ssd Hard Drive 35.6 Cm 14 Diognal Fhd. Make:Hp / Dell With Ms Office And Inbuild Windows. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Multi-Functional A3 Size Colour Printer Latest With Trolley. Make: Canon. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Printer Laser Jet Pro M 202Dw. Make: Canon. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Scanner Hp / Dell. Make: Canon. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Automatic Sewing Machine ( With Necessary Attachments ( Zip Fixing, Plcot Gathering Foot Etc. ) ( With Necessary Attachments ( Zip Fixing, Plcot Gathering Foot Etc. ) Make: Zuki. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 3.00 Cost Supply And Delivery Of Air Conditioner Of 2 Ton Capacity With Stabilizer. Make:Blue Star.Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Computer Set With Ups &Multimedia Projector. Cpu: 32 / 64 Bit I3 / I5 / I7 Or Latestprocessor, Speed: 3 Ghz Or Higher. Ram:-4 Gb Ddr-Iii Or Higher, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, With Usb Mouse, Usb Keyboard And Monitor ( Min. 17 Inch Licensed Operating System And Antivirus Compatible With Trade Related Software. Make:Dell / Hp / Epson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Ac Unit Split Type. 2 Ton Capacity With Stabilizer. Make:Blue Star. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Ac Unit Split Type. 2 Ton Capacity With Stabilizer. Make:Blue Star. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost For Tools And Eqiupments Of Fashioon Design & Technology: Cost Supply And Delivery Of Dress Forms ( Dummies ) Children Ladies Gents ( Fibre ) . Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Computer Set With Ups & Multimedia Projector. Cpu: 32 / 64 Bit, 7Th Generation Or Higher, I3 Or Latest Processor, Speed: 3 Ghz Or Higher. Ram: 8 Gb Or Higher, 1Tb Hdd / Sdd, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, With Usb Mouse, Usb Keyboard And Monitor ( As Available In The Market ) . Or All In One Pc Licensed Operating System And Antivirus Compatible With Trade Related Software. Make:Dell / Hp / Epson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of White Magnetic Board With Felt Board & Accessories Of Size:17X23 ( Fibre With Wooden Frame ) . Make:Roger And Moris. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 25.00 Cost Supply And Delivery Of Sewing Machine - Single Needle Lock Stitch Industrial Model 3 Thread ( Electric Type ) . Make: Juki. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Over Lock Machine 3 Thread ( Electrict Type ) . Make:Juki. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 24.00 Cost Supply And Delivery Of It Lab With Computers Setup &Installation Along With Ups Required Configuration For Software ( Corel Draw ) Cpu: 32 / 64 Bit, 7Th Generation Or Higher, I3 Or Latest Processor, Speed: 3 Ghz Or Higher. Ram: 8 Gb Or Higher, 1Tb Hdd / Sdd, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, With Usb Mouse, Usb Keyboard And Monitor ( As Available In The Market ) . Or All In One Pc Licensed Operating System And Antivirus Compatible With Trade Related Software. Make:Dell / Hp. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply, Delivery, Installation And Testing Of Designing Software Coral Draw. Latest Version Make:Coral. 1.00 Cost Supply And Delivery Of Multi Functional A4 Colour Printer. Printer With Trolly / Table. Make:Hp Laser Jet. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Lcd Projector. Make:Epson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Vacuum Cleaner.Lab Cleaning ( Latest ) . Make:Euroclean Wd X2 Dry And Wet Vacuum Cleaner. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 List Of Tools And Equipment Of Electrician Trade: Cost Supply And Delivery Of Drill Hand Brace 0-100Mm ( Stainles Steel ) Make:Hudson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Load Bank ( Lamp / Heater Type ) .6 Kw, 3Ph Make:Kohir / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Electronic Components. Consisting Resistors, Diode, Transistor, Ujt, Fet, Scr, Diac, Traic, Igbt, Small. Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 3.00 Cost Supply And Delivery Of Bus Bar With Brackets.1 Mtr Each. Make:Siemens / L &T / Ge. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Rcc Pole With Accessories ( Ms Angle Iron, ‘C’ Clamp, Stay Insulator Etc. ) And Materials.6 Mtr Make:Superior. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Tachometer. Analog Type - 10000 Rpm Make: Metrix / Meco / System. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of G. Auto Transformer Type. Make:Krb / Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Oscilloscope Dual Trace 20 Mhz Make:V A R Tech Ss 5020 B Oscilloscope 20 Mhz Dual Channel Cro. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Oil Testing Kit 230 V, Single Phase 50 Hz 60 Va Output 0-60 Kv Variable. Make:Kiloskar / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Inverter With Battery 1 Kva With 12 V Battery, Input- 12 Volt Dc, Output- 220 Volt Ac Make:Luminous . Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Battery Charger 0 - 6 - 9 - 12 - 24 - 48 V, 30Amp. Make:Elektron . Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Solar Panel With Battery 18 Watt. Make:V-Guard / Exide. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of I5 And I7 Generation Computer Or Latest Version & Instalation 2.8 Ghz & Above, 8 Gb Ram, 500 Gb Hdd, Dvd Combo Drive, 19 / 21” Monitor, Optical Scroll Mouse, Multimedia Keyboard, 32 Bit Lan Card With Upp Port, Necessary Drivers, Etc. Or ( Latest Version ) . Make:Hp / Dell. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ink Jet / Laser Printer. Laser Jet Pro M 202 Dw. Make:Hp / Samsung. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of D.C. Shunt Generator With Control Panel, ( With Installation ) .2.5 Kw, 220V &3Phase Squirrel Cage Induction Motor, 5Hp, 440V With Control Panel & Star Delta Starter. Make:Crompton / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Motor-Generator ( Ac To Dc ) ( With Installation ) .Squirrel Cage Induction Motor With Star Delta Starter And Directly Coupled To Dc Shunt Generator And Switch Board Mounted With Regulator, Air Breaker, Ammeter, Voltmeter, Knife Blade Switches And Fuses, Set Complete With Case Iron And Plate, Fixing Bolts, Foundation Bolts And Flexible Coupling. Induction Motor Rating: 7.5 Hp, 415V, 50 Cycles, 3 Phases. Dc Shunt Generator Rating: 5 Kw, 440V ( Output Voltage Varies 110-440V ) Make:Crompton / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of D.C. Compound Generator With Control Panel Including Fitted Rheostat, Voltmeter, Ammeter And Breaker, 2.5 Kw, 220V &3Phase Squirrel Cage Induction Motor, 5Hp, 440V, With Control Panel & Star Delta Starterr. Make:Crompton / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Dc Series Motor Coupled With Spring Balance Load With Instalation. 2.5 Kw, 220 Volts Make:Crompton / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Dc Shunt Motor 2.5 Kw, 220 V. Make:Crompton / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Dc Compound Motor With Starter And Switch ( With Installation ) .2.5 Kw , 220 Volts Make:Kbr / Crompton / Kiloskar. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Motor Generator ( Dc To Ac ) Set Consisting Of - Shunt Motor With Starting Compensator And Switch Directly Coupled To Ac Generator With Exciter And Switch Board Mounted With Regulator, Breaker, Ammeter, Voltmeter Frequency Meter, Knife Blade Switch And Fuses Etc. Set Complete With Cast Iron Bed Plate, Fixing Bolts, Foundation Bolts And Flexible Coupling. ( With Installation ) . Shunt Motor Rating: 5 Hp, 440V Ac Generator Rating : 3-Phase, 4 Wire, 3.5 Kva, 400 / 230 Volts, 0.8 Pf, 50Cycles Make:Kbr / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ac Squirrel Cage Motor With Star Delta Starter And Triple Pole Iron Clad Switch Fuse With Mechanical Load. ( With Installation ) 5 Hp, 3-Phase, 415 V, 50 Hz Make:Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ac Phase-Wound Slip Ring Motor With Starter Switch. 5 Hp, 440 V, 3 Phase, 50 Hz Make:Krb / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Universal Motor With Starter / Switch. 240 V, 50 Hz, 1 Hp Make:Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Synchronous Motor With Accessories Like Starter, Excitation Arrangements.3 Phase, 3 Hp, 440V, 50Hz, 4 Pole Make:Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Thyristor / Igbt Controlled D.C. Motor Drive With Tacho-Generator Feedback Arrangement ( With Installation ) 1 Hp. Make:Kbr / Havells / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Thyristor / Igbt Controlled A.C. Motor Drive With ( With Installation ) .Vvvf Control 3 Phase, 2 Hp Make:Kbr / Havells / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Three Phase Transformer, Shell Type Oil Cooled With Delta / Star. 3 Kva , 415 / 240 V, 50 Hz Make:Kbr / Havells / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Electrical Machine Trainer – Suitable For Demonstrating The Construction And Functioning Of Different Types Of Dc Machines And Ac Machines ( Single Phase And Three Phase ) . Should Be Fitted With Friction Brake Arrangement, Dynamo Meter, Instrument Panel And Power Supply Unit. Make:Kirlosker / Siemens / Havells / Benn / Energy Pack / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Diesel Generator Set With Changeover Switch, Over Current Breaker And Water / Air-Cooled With Armature, Star-Delta Connections Ac3 Phase, 7.5 Kva, 415 Volt Or Higher Rating Make:Bharath / Mahahendra. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Used Dc Generators-Series, Type For Overhauling Practice 5Kva. Make:Krb / Kirlosker. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Used Dc Generators- Shunt Type For Overhauling Practice 5Kva. Make:Krb / Kirlosker. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Used Dc Generators-Compound Type For Overhauling Practice 5Kva. Make:Krb / Kirlosker. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Pillar Electric Drill Machine Motorized. 12-20 Mm Capacity, 1Hp, 440V, 3 Phase, Induction Motor With Dol Starter, Bench Type. Make:Vimal / Glow. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Motorised Bench Grinder. 1 Hp. 3 Phase, 440V With Dol Starter, Double Side With Smooth And Rough Wheel With Tool Base Make:Bosch / Metro. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ceiling Fan Coil Winding Machine. 250V, 50 Hz, 1-Ф, With Speed Control. Make:Shyam. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Primary Current Injection Set.220V, 50 Hz, 1-Ф, Output Current - 200 A ( Min ) With Timer Make:Krb / Atico. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ev Charger 3 Phase Input. Make:Tata Power Ez. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ev Charger ( Home ) 1 Phase Input. Make:Tata Power Ez. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply And Delivery Of Working Bench. 2.5 M X 1.20 M X 0.75 M ( Iron ) Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete.
Contract Date: Ref. Documents Contract Value : 1.12 Crore
Government Departments No of Bidders 1
38.
Housing Urban and Rular Development #11432178 Price Bid
Tender for Excavation In Foundation For Retaining, Breast Walls Etc, In All Types Of Soils And Rocks Including All Lead, Lift And Disposal Of Surplus Material As Per Direction Of Engineer - In - Charge, As Per Drawing And Technical Specifications Clause 305.1 Of Mord Specifiction , Removal Of Unsuitable Soil With Disposal Upto 1000 M Removal Of Unsuitable Soil Including Excavation, Loading And Disposal Upto 1000 M Lead But Excluding Compaction Ground Supporting Embankment Subgrade Replacement By Suitable Soil, Which Shall Be Paid Separately As Per Clause 303.5.2 As Per Technical Specification Clause 302.3.11 , Concrete With Cement, Coarse Sand And 40 Mm Gauge Stone Ballast In Proportion 1:4:8 In Foundations And Floors Including Supply Of All Material, Labour And T&P Etc. Required Forproper Completion Of The Work. As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Random Rubble Stone Masonry Laid In 1:6 Cement And Sand Mortar, In Breast Walls, Retaining Walls, Parapets, Scuppers, Etc. Including Supply Of All Material, Labour, T&P And Royaltiies Etc. Complete As Per Drawing And Technical Specifications Clauses 702, 704, 1202 & 1203 Of Mord Specifiction , Random Rubble Stone Masonry Laid Dry, In Breast Walls, Retaining Walls, Etc. Including Supply Of All Material, Labour, T&P And Royaltiies Etc. Complete As Per Drawing And Technical Specifications Clauses 702, 704, 1202 & 1203 Of Mord Specifiction , Hand Packed Stone Filling In Back Of Wallls Including Cost Of All Materials, Royality, T&P Etc. Complete As Per Direction Of Engineer-In- Charge. (As Per Pwd Uttarakhand Specifications) , Providing Weepholes In Brick Masonry/Stone Masonry, Lain / Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Technical Specification Clauses 614, 709, 1204.3.7 , Excavation In Hilly Areas In Ordinary Rock By Mechanical Means Not Requiring Blasting (With Out Dozer) Excavation In Hilly Area In Ordinary Rock Not Requiring Blasting By Mechanical Means Without Using Dozer Including Cutting And Trimming Of Slopes And Disposal Of Cut Material With A Lift Upto 1.5 M And Lead Upto 20 M As Per Clause 1603.2. , Providing And Laying Of Stone Set Pavement Over 2.5 Cm Thick Bedding Layer Of Plain Cement Concrete 1:2:4 Which Shall Further Be Placed Over 10 Cm Thick Dry Stone Kharanja Or Crushed Stones Base Over A Prepared Subgrade As Per Drawings And Technical Specifications. The Size Of Stones Shall Not Be Less Than 20Cm X 20Cm And Thickness Of Stones Shall Vary From 10Cm To 15 Cm. The Work Includes Filling Of Joints With Plain Cement Concrete 1:2:4 As Per The Standard Drawings And Instructions Of The Engineer-In-Charge. , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, For All Lift, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 And For All Lift. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : - 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : - 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : 6.4.1 Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:6 (1 Cement: 6 Fine Sand) - Outer Plaster , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : 13.41.1 New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Hot Finished Seamless Type Tubes , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Stringers, Treads, Landings Etc. Of Stair Cases, Including Use Of Chequered Plate Wherever Required, All Complete , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggreentrance Gate 20 Mm Nominal Size Derived From Natural Sources) , Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggreentrance Gate 20 Mm Nominal Size) Upto Plinth Level With : Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggreentrance Gate 20 Mm Nominal Size Derived From Natural Sources) , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Columns, Pillars, Piers, Abutments, Posts And Struts , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers With Water Proof Ply 12 Mm Thick , Random Rubble Masonry With Hard Stone In Superstructure Above Plinth Level And Upto Floor Five Level, Including Leveling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size) At Window Sills, Ceiling Level And The Like. Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Pointing On Stone Work With Cement Mortar 1:3 (1 Cement : 3 Fine Sand) : Raised And Cut Pointing , Providing And Fixing 2Nd Class Teak Wood Plain Lining Tongued And Grooved, Including Wooden Plugs Complete With Necessary Screws And Priming Coat On Unexposed Surface. 12 Mm Thick , French Spirit Polishing : Two Or More Coats On New Works Including A Coat Of Wood Filler , Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) Of Total Coated Thickness 0.50Mm (Base Metal Of Minimum 0.45Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing Fixing Thermal Insulation Of Ceiling (Under Deck Insulation) With Resin Bonded Fibre Glass Wool Conforming To Is : 8183, Density 24Kg / M3, 50Mm Thick, Wrapped In 200 G Virgin Polythene Bags, Fixed To Ceiling With Metallic Cleats (50X50x3 Mm) @ 60 Cm And Wire Mesh Of 12.5 Mm X 24 Gauge Wire Mesh, For Top Most Ceiling Of Building. , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50Mm (Base Metal Of Minimum 0.45Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Ridges Plain (500 - 600Mm) , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50Mm (Base Metal Of Minimum 0.45Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Flashings/ Aprons.( Upto 600 Mm) , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50Mm (Base Metal Of Minimum 0.45Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Gutter (600 Mm Over All Girth) , Manufacturing, Supplying And Fixing Retro Reflective Sign Boards Made Up Of 2 Mm Thick Aluminium Sheet, Face To Be Fully Covered With High Intensity Encapsulated Type Heat Activated Retro Reflective Sheeting Conforming To Type - Iv Of Astm-D 4956-01 In Blue And Silver White Or Other Colour Combination Including Subject Matter, Message (Bi-Lingual), Symbols And Borders Etc. As Per Irc ; 67:2001, Pasted On Substrate By An Adhesive Backing Which Shall Be Activated By Applying Heat And Pressure Conforming To Class -2 Of Astm-D-4956-01 And Fixing The Same With Suitable Sized Aluminium Alloy Rivets @ 20 Cm C/C To Back Support Frame Of M.S. Angle Iron Of Size 25X25x3 Mm Along With Theft Resistant Measures, Mounted And Fixed With 2 Nos. M.S. Angles Of Size 35X35x5 Mm To A Vertical Post Made Up To M.S. Tee Section Ismt 50X50x6 Mm Welded With Base Plate Of Size 100X100x5 Mm At The Bottom End And Including Making Holes In Pipes, Angles Flats, Providing & Fixing M.S. Message Plate Of Required Size, Steel Work To Be Painted With Two Or More Coats Of Synthetic Enamel Paint Of Required Shade And Of Approved Brand & Manufacture Over Priming Coat Of Zinc Chromate Yellow Primer (Vertical Ms-Tee Support To Be Painted In Black And White Colours).Backside Of Aluminium Sheet To Be Painted With Two Or More Coats Of Epoxy Paint Over And Including Appropriate Priming Coat Including All Leads And Lifts Etc. Complete As Per Drawing, Specification And Direction Of Engineer-In-Charge. 16.59.1 Mandatory/ Regulatory Sign Boards Of 900 Mm Diametre With Support Length Of 3750 Mm , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. 2.6.1 All Kinds Of Soil , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. All Works Above Plinth Level Upto Floor V Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. All Works Above Plinth Level Upto Floor V Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Up To 50 M And Lift Up To 1.5 M , Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. , Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos / Lindane E.C. 20% With 1% Concentration , Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand (Zone - Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Over 75Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation, Levelling & Dressing & Finishing The Top Smooth , Providing And Fixing Plain Lining With Necessary Screws/Nuts & Bolts/ Nails, Including A Coat Of Approved Primer On One Face, And Fixed On Wooden /Steel Frame Work, Complete As Per Direction Of Engineer-In- Charge (Frame Work Shall Be Paid For Separately). 12 Mm Thick Commercial Ply Conforming To Is : 1328 Bwr Type , Providing Fixing Thermal Insulation Of Ceiling (Under Deck Insulation) With Resin Bonded Fibre Glass Wool Conforming To Is : 8183, Density 24Kg / M3, 50Mm Thick, Wrapped In 200 G Virgin Polythene Bags, Fixed To Ceiling With Metallic Cleats (50X50x3 Mm) @ 60 Cm And Wire Mesh Of 12.5 Mm X 24 Gauge Wire Mesh, For Top Most Ceiling Of Building. , Providing And Fixing Of External Wall System On Light Gauge Steel Frame Work With Outer Face Cement Boards As Per Standard Sizes Fixed With Self-Drilling / Taping Screws / Fasteners @ 60 Cm C/C Of Approved Make. A Groove Of 2 Mm To 3 Mm Shall Be Maintained And Grooves Shall Be Sealed With Silicon Based Sealant. The Board Shall Be Fixed In A Staggered Pattern. Screws Shall Be Of Counter Sunk Rib Head Of 1.60 Mm To 4 Mm Thick Or 8 To 10 Gauge Of Length Varying From 25 To 45 Mm And. Internal Face 12.5 Mm Thick Gypsum Plaster Board Fixed On Cement Board As Per Standard Sizes Fixed With Self- Drilling / Taping Screws / Fasteners @ 60Cm C/C Of Approved Make, Proper Taping And Jointing To Be Done Using Fiber Mesh Tape And Epoxy And Acrylic Based Jointing Compound For Seamless Finish.(Cost Of Frame Work To Be Paid For Separately) Outer Face- Outer Face Having 6 Mm Thick Fiber Cement Board Type A, Category-Iv As Per Is:14862:2000 Fixed On 9 Mm Thick Fiber Cement Board, Type A, Category-Iv As Per Is:14862:2000 (High Pressure Steam Cured) Inner Face- 12.5 Mm Thick Gypsum Plaster Board Conforming To Is 2095:2011 Fixed On 8 Mm Thick Fibre Cement Board Of Type B, Category-Iii As Per Is:14862:2000 (High Pressure Steam Cured) , Providing And Fixing Internal Wall Panels On Light Gauge Steel Frame Work With 12.5 Mm Thick Gypsum Plaster Board Conforming Is 2095:2011 Fixed On Cement Board As Per Standard Sizes Fixed With Self-Drilling / Taping Screws / Fasteners @ 60 Cm C/C Of Approved Make, Screws Shall Be Of Counter Sunk Rib Head Of 1.60 Mm To 4 Mm Thick Or 8 To 10 Gauge Of Length Varying From 25 To 45 Mm. Proper Taping And Jointing To Be Done Using Fiber Mesh Tape And Epoxy And Acrylic Based Jointing Compound For Seamless Finish.(Cost Of Frame Work To Be Paid For Separately Cement Fiber Board 8 Mm Thick Of Type B, Category Iii As Per Is 14862:2000 (High Pressure Steam Cured) , Providing And Fixing In All Exterior Face Panels Breathable Vapour Barrier Underneath The Cement Fiber Board As Per National Building Code 2009 Complete As Per Direction Of Engineer-In-Charge. , Providing And Fixing M.S. Tubular Frames For Doors, Windows, Ventilators And Cupboard With Rectangular/ L-Type Sections, Made Of 1.60 Mm Thick M.S. Sheet, Joints Mitred, Welded And Grinded Finish, With Profiles Of Required Size, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. 10.15.1 Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10x10 Cm Of cement concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size , Providing And Fixing Pressed Steel Door Frames Conforming To Is: 4351, Manufactured From Commercial Mild Steel Sheet Of 1.60 Mm Thickness, Including Hinges, Jamb, Lock Jamb, Bead And If Required Angle Threshold Of Mild Steel Angle Of Section 50X25 Mm, Or Base Ties Of 1.60 Mm, Pressed Mild Steel Welded Or Rigidly Fixed Together By Mechanical Means, Including M.S. Pressed Butt Hinges 2.5 Mm Thick With Mortar Guards, Lock Strikeplate And Shock Absorbers As Specified And Applying A Coat Of Approved Steel Primer After Pre-Treatment Of The Surface As Directed By Engineer In-Charge: Profile B Fixing With Carbon Steel Galvanised Dash Fastener Of Required Dia And Size (To Be Paid For Separately) , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding , Providing And Fixing Fly Proof Galvanized M.S. Wire Gauge To Windows And Clerestory Windows Using Wire Gauge With Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia 0.63 Mm All Complete. With 12 Mm Mild Steel U Beading (Mosquito Jali). , Providing & Fixing Glass Panes With Putty And Glazing Clips In Steel Doors, Windows, Clerestory Windows, All Complete With : 10.30.1 4.0 Mm Thick Glass Panes , Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete (Copper Oxidised As Per Is 1378) - 125 Mm , Providing And Fixing Isi Marked Oxidised M.S. Tower Bolt Black Finish, (Barrel Type) With Necessary Screws Etc. Complete (Copper Oxidised As Per Is 1378) - 250X10 Mm , Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete (Copper Oxidised As Per Is 1378) - 300X16 Mm , Providing And Fixing Isi Marked 85X42 Mm Oxidised M.S. Pull Bolt Lock Conforming To Is : 7534 With Necessary Screws Bolts, Nut And Washers Etc. Complete (Copper Oxidised As Per Is 1378). , Providing And Fixing Aluminium Hanging Floor Door Stopper Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour And Shade With Necessary Screws Etc. Complete. Single Rubber Stopper , Providing And Fixing Ptmt Door Catcher Of Length 72 Mm And Dia. Of 42 Mm With Suitable Washers Weighing Not Less Than 33 Gms , Providing And Laying Vitrified Tiles In Floor With Different Sizes (Thickness To Be Specified By The Manufacturer), With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 15477, In Average 6 Mm Thickness, Including Grouting Of Joints (Payment For Grouting Of Joints To Be Made Separately). Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer), With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Brand & Manufacturer, In All Colours And Shade, In Skirting, Riser Of Steps, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is: 15477, In Average 6 Mm Thickness, Including Grouting Of Joints (Payment For Grouting Of Joints To Be Made Separately). Size Of Tile 600X600 Mm , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture , Excavating, Supplying, Stacking And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Foundation Trenches, Plinth, Sides Of Foundation Etc. Complete For All Lift. , Supplying And Filling Of Earth By Mechanical Transport Including Loading, Unloading & Stacking Beyond 5Km Upto 10Km & Beyond 10Km Upto 20Km (Including All) , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge; For The Following Grades Of Concrete. Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. All Works Above Plinth Level Upto Floor V Level. Concrete Of M30 Grade With Minimum Cement Content Of 350 Kg /Cum , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Stairs, (Excluding Landings) Except Spiral-Staircases , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Extra For Providing And Placing In Position 2 Nos 6Mm Dia. M.S. Bars At Every Third Course Of Half Brick Masonry , 12 Mm Cement Plaster Of Mix: 1:6 (1 Cement: 6 Fine Sand) - Inner Plaster , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screw , Providing And Fixing Factory Made Isi Marked Steel Glazed Doors, Windows And Ventilators, Side /Top /Centre Hung, With Beading And All Members Such As F7d,F4b, K11 B And K12 B Etc. Complete Of Standard Rolled Steel Sections, Joints Mitred And Flash Butt Welded And Sash Bars Tenoned And Riveted, Including Providing And Fixing Of Hinges, Pivots, Including Riming Coat Of Approved Steel Primer, But Excluding The Cost Of Other Fittings, Complete All As Per Approved Design, (Sectional Weight Of Only Steel Members Shall Be Measured For Payment). 10.11.1 Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10x10 Cm Of cement concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size , Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete , Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In All Colours, Shades, Except White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sq.M Including Pointing The Joints With White Cement And Matching Pigments Etc., Complete. , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sq M Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sq M) , Providing And Laying Water Proofing Treatment In Sunken Portion Of Wcs, Bathroom Etc., By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying : (A) First Layer Of Slurry Of Cement @ 0.488 Kg/Sqm Mixed With Water Proofing Cement Compound @ 0.253 Kg/ Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours. (B) Second Layer Of Slurry Of Cement @ 0.242 Kg/Sqm Mixed With Water Proofing Cement Compound @ 0.126 Kg/Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours Followed With Water Curing For 48 Hours. The Rate Includes Preparation Of Surface, Treatment And Sealing Of All Joints, Corners, Junctions Of Pipes And Masonry With Polymer Mixed Slurry. , Add For Plaster Drip Course/ Groove In Plastered Surface Or Moulding To Reinforced Cement Concrete Projections.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
Uttarakhand View Result →
Himachal Pradesh View Result →
41.
Drinking Water Supply and Sanitation #11423804 AOC
Supply And Delivery Of Various Mandatory Spares Of Vertical Pump Set With Model Of Vt-26-46 / 3 Stage Make Of Wpil Like Pump Shafts, Line Shafts, Bearings, Kirloskar Make Impeller, Model :Hsc-Uph550 / 110 And Other Accessories Etc., Complete For Capacity Of 3000Kw, 6.6Kv, Pumping Stations At Murmur, Bommakal, Mallaram And Kondapaka Undergodavari Drinking Water Supply Scheme, Phase-I, Under Gm ( E ) , O&M Division-Xxi, Control Room..-1 Supply And Delivery Of Pump Shaft ( 3810Mm ) , Part-16, Model: Vt-26-46 / 3 Stage, Wpil Make, Material Of Construction: Ss 431, Including Cost Of Material, Labour Charges For Loading And Unloading, Transportation To Work Site At Murmur Pumping Station And As Directed By The Departmental Officers. 2 Supply And Delivery Of Line Shaft ( 2046Mm Long ) , Part-22A, Model : Vt-26-46 / 3 Stage, Wpil Make, Material Of Construction : Ss431, Including Cost Of Material, Labour Charges For Loading And Unloading, Transportation To Work Site At Murmur Pumping Station And As Directed By The Departmental Officers. 3 Supply, Delivery And Transportation Of Driving End Bearing No.6248Mc3 And Model No.41455P423-11-01Rq7804-B For 6.6Kv, 3000Kw, Bhel Make Motor With All Accessories Including Cost And Conveyance Of All Materials Etc., Complete At Murmur Pumping Station As Directed By The Departmental Officials. 4 Supply, Delivery And Transportation Of Non-Driving End Bearing No.7348B And Model No. 41455P423-11-01Rq7804-B For 6.6Kv, 3000Kw, Bhel Make Motor With All Accessories Including Cost And Conveyance Of All Materials Etc., Complete At Murmur Pumping Station As Directed By The Departmental Officials. 5 Supply, And Delivery Of ( 3.81 / 3.98Kv ) 300Kvar Capacitors Unit 1Phase, 2 Pole Rating Of 50Hz Power Factor Improving Capacitor Units For Individual Motors To Suit The Existing System At Bommakal 6.6 / 6.9Kv Pumping Station Confirming To Is 13925 Including The Cost Of Material And Transportation As Per The Old Sample As Directed By The Departmental Officials. 6 Supply, And Delivery Of ( 3.81 / 3.98Kv ) 333.33Kvar Capacitors Unit 1Phase, 2 Pole Rating Of 50Hz Power Factor Improving Capacitor Units For Bus Capacitors To Suit The Existing System At Bommakal 6.6 / 6.9 Pumping Station Confirming To Is 13925 Including The Cost Of Material And Transportation As Per The Old Sample As Directed By The Departmental Officials. 7 Supply, Delivery And Fixing Of 6.9 Kv, 50Hz, Rvt Ratio Of Kv / 110-190V Residual Voltage Transformer, Oil Cool Type, Class Of Insulation B, To With Stand The Ambient Temperature Of 50°C For And To Suit The Existing System Of 3Mvar Yard Capacitor Banks To Suit The Existing System At Mallaram Including The Cost Of Material And Transportation Etc., Complete As Directed By The Departmental Officers. 8 Supply And Delivery Of Pump Impeller, Part-159001, Moc Code: 232, Model : Hsc- Uph550 / 110, Kbl Make, Material Of Construction: Cf8m / Wcb / Ss410, And To Suit The Existing System Including Cost Of Material, Labour Charges For Loading And Unloading, Transportation To Work Site At Kondapaka Pumping Station And As Directed By The Departmental Officers. 9 Supply, Delivery And Transportation Of Non-Driving End Bearing No.Xlife-22338-E1-K-C3 And Model No. J344-170229 0200 And Make Is Fag Germany For 6.6Kv, 3000Kw, Wpil Make, Horizontal Centrifugal Pumpset With All Accessories Including Cost And Conveyance Of All Materials Etc., Complete At Mallaram Pumping Station As Directed By The Departmental Officials. 10 Supply, Delivery And Transportation Of Non-Driving End & Driving End Bearing No.Nu1048mc3, And Make Is Skf / Fag For 6.6Kv, 3000Kw, Bhel Make Motor With All Accessories Including Cost And Conveyance Of All Materials Etc., Complete At Mallaram Pumping Station As Directed By The Departmental Officials. 11 Supply, Delivery, Transportation And Erection Of Driving End Bearing No.6048Mc3 And Make Is Skf / Fag For 6.6Kv, 3000Kw, Bhel Make Motor With All Accessories Including Cost And Conveyance Of All Materials Etc., Complete At Mallaram Pumping Station As Directed By The Departmental Officials.
Contract Date: Ref. Documents Contract Value : 2.03 Crore
Government Departments No of Bidders 1
42.
Rural Development #11422928 Technical Bid
Tender for Supply Of Construction Material For All Scheme At Gp Walni, Ta Saoner, Dist Nagpur , Item Wise Boq Boq_Ver3.0 Item Wise Normal Inr Only Inr Select, Excess (+), Less (-) Tender Inviting Authority: Sarpanch/Gramsevak Grampanchayat Walni, Panchayat Samiti Saoner, Dist Nagpur Name Of Work: Supply Of Construction Material For All Scheme At Gp Walni, Ta Saoner, Dist Nagpur Contract No: Zp/Ngp/Gp/Walani/Supply Of Construction Material For All Scheme /Tender/ No1/2026-27 Prmdet Name Of The Bidder/ Bidding Firm / Company : Price Schedule (Domestic Tenders - Rates Are To Given In Rupees (Inr) Only) (This Boq Template Must Not Be Modified/Replaced By The Bidder And The Same Should Be Uploaded After Filling The Relevant Columns, Else The Bidder Is Liable To Be Rejected For This Tender. Bidders Are Allowed To Enter The Bidder Name And Values Only ) Number # Text # Text # Number # Text # Number Number Text Text # Number # Text# Text # Number # Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number # Number # Text Text Number # Number # Date Number # Number # Text # Sl. No. Item Code / Make Quantity Units Estimated Rate In Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Basic Rate In Figures To Be Entered By The Bidder In Rs. P Excise Duty Amount In Inr Rs. P Gst Amount In Inr Rs. P Freight Charges ( Unloading & Stacking) In Rs. P Any Other Taxes In Rs. P Any Other Duties/Levies In Rs. P Iiird Party I.E Dgs&D / Rites Etc Inspection Charges @0.34%+Service Tax Less For Cenvat Credit,If Any Respect Of Supplies Under Full Excise Duty Category Total Amount Without Taxes Col (13) = (4) X (7) In Rs. P Total Amount With Taxes Col (14) = Sum (8) To (13) In Rs. P Total Amount In Words , Items : , Acc Cement 53 Gred ( I.S.I.) , Ultratech Cement 53 Gred ( I.S.I.) , Ambuja Cement 53 Gred ( I.S.I.) , Bricks (Red) , Bricks (Ash) , Bricks (Cement) , Gi Sheet , Sand Kanhan , Sand Black , Soft Murum , Hard Murum , Soil (Red) , Soil (Black) , Metal 10 Mm , Metal 20 Mm , Metal 40 Mm , Metal 60 Mm , Metal 80 Mm , Steel 6 Mm , Steel 8 Mm Tmt Fe 500 , Steel 10 Mm Tmt Fe 500 , Steel 12 Mm Tmt Fe 500 , Steel 16 Mm Tmt Fe 500 , Steel Gril Work , Kota Stone , Tiles Vetryfide (2*2 Fit) , Pelving Block Hydrolick Mode , Pelving Block Rubber Mode , Cement Paver Blocks 60 Mm , Reinforced Cement Concrete Cement Pipe 250 Mm , Reinforced Cement Concrete Cement Pipe 300 Mm , Reinforced Cement Concrete Cement Pipe 450 Mm , Reinforced Cement Concrete Cement Pipe 600 Mm , Reinforced Cement Concrete Cement Pipe 900 Mm , Centring Tar , Mixure Machine , Vibratar , Roller , Water Tanker 6000 Ltr Total In Figures 0.0 0.0 Inr Zero Only 4.0 Construction Of Chamber For 100Mm Sluice Plates Item5 10.0 Nos Quoted Rate In Figures Select % 0.0 0.0 Zero Only Quoted Rate In Words Inr Zero Only
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
43.
Heavy Industries and Public Enterprises #11422861 Technical Bid
Tender For Strengthening The West Side Compound Wall 300M From South End Towards North.; 1 Brick work in cm 1:6 using first class wire cut bricks of nominal size for super structure up to 5.00 M including all cost and conveyance of materials, socking of brick, curing, necessary scaffolding, alllabour charges etc but excluding cost of cement etc complete as per standard specification but excluding cost of cement. 2 ReinforcedCement concrete1:2:4 using20mmhardbrokenstonefor Belt, lintel & beametc includingcost& conveyanceof all materials hirechargesfor shuttering, labour chargesfor boxing,mixing, placing, ramming, watering, curingetc complete as perstandard specificationbutexcludingcost of cement & MS reinforcement 3 MS reinforcement bent , tied andplacedinpositionforallRCCworksincludingallcostandconveyanceofMS bars,bindingwires, all labour charges,loading/ unloading charges etc completeas per standard specification. 4 Cleaning removal of old plastering walls including raking outjoints and clearing the surfaceandafterPlastering with cm 1:4, 15mm thick one coat at all heights and levels floated hard and trowelledsmooth with neat cement flushing coat including all cost and conveyance of materials and labour charges, providing necessary scaffolding, watering and curing etc complete as per standard specification but excluding cost of cement. 5 Supplying and stacking ISI mark best quality portland cement (OPC/PPC) approved make including all cost and conveyance of materials, loading and unloading charges etc complete (Payment will be made only for actual quantity ofcement consumed) . 6 Painting the Inside /outside walls of replastering compound wall with Acrylic exterior paint of approved quality and colour (Asian/Berger/ICI make) two coats over the one coat of white cement coating & one coat water based approved quality exterior wall puttyafter cleaning thesurface at all heights and levels including all cost and conveyance of materials, all labour charges, hire charges for tools and plants, scaffolding charges, etc complete as per standard specification. 7 Glass coping with glass chips in in cm 1:4,at all heights and levelsincluding all cost and conveyance of materials and labour charges, providing necessary scaffolding, watering and curing etc complete as per standard specification but excluding cost of cement. 8 Supplying & fixing Anjili wood planed and framed work for frames size of 12x6mm and Full covering with2 mm thick aluminium plain sheetof Gate shutter etc at all heights using well seasoned anjili wood ,Nuts and bolts, gate clamp and locking system etc including all cost and conveyance of all materials, hold fast, screws etc loading and unloading charges, all labour charges for fixing in position etc complete as per standard specification 9 Sundry & Petty works such brick works such as dismantling of existing fencingMason 10 Sundry & Petty works such brick works such as dismantling of existing fencingMan mazdoor
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 1
Contract Date: Ref. Documents Contract Value : 4.14 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 4.14 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 4.14 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 4.14 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 4.14 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 4.14 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
TenderDetail
Loading tenders