View Bid Results For Tubular Steel Structure Tenders

We found 1749 Bid Results related to tubular steel structure tenders. You can find Contractor details who won tubular steel structure tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–35 of 1749 tenders matching your filters

Science and Technology #11440503 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 2

Karnataka View Result →

Housing Urban and Rular Development #11432190 Price Bid

Tender for 2.6.1Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq M On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. - All Kinds Of Soil , 2.25Filling Available Excavated Earth (Excluding Hard Rock/Ordinary Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Upto 1.5 M. , 2.27Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. , 4.1.4 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : - 1 :2:4 (1 Cement : 2 Coarse Sand (Zone-Ill) Derived From Natural Sources : 4 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , 4.1.8 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : - 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stone Aggregate 40 Mmnominal Size) , 4.17Making Plinth Protection 50 Mm Thick Of Cement Concrete 1 :3:6 (1 Cement : 3 Coarse Sand (Zone-Ill) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Over 75 Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation, Levelling & Dressing & Finishing The Top Smooth. , 5.1.2 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level [ 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii): 3 Graded Stone Aggregate 20 Mm Nominal Size) ] , 5.33.1.1 Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana I Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate I Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. All Works Upto Plinth Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , 5.33.2.1 Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana I Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate I Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. All Works Above Plinth Level Upto Floor V Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , 5.22.6Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , 5.9.1Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : Foundations, Footings, Bases For Columns , 5.9.5Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , 5.9.21Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers With Water Proof Ply 12 Mm Thick , 6.1.2Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1 :6 (1 Cement: 6 Coarse Sand) , 7.1.1Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1 :6:12 (1 Cement: 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size) Upto Plinth Level With : Cement Mortar 1 :6 (1 Cement: 6 Coarse Sand) , 8.14.4.1Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1 :3 (1 Cement: 3 Coarse Sand) Including Pointing In White Cement Mortar 1 :2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) :White Sand Stone - Exposed Face Machine Cut And Table Rubbed With Rough Backing. 70 Mm Thick , 8.25.1Providing And Fixing 2Nd Class Teak Wood Plain Lining Tongued And Grooved, Including Wooden Plugs Complete With Necessary Screws And Priming Coat On Unexposed Surface. 40 Mm Thick , 8.25.4Providing And Fixing 2Nd Class Teak Wood Plain Lining Tongued And Grooved, Including Wooden Plugs Complete With Necessary Screws And Priming Coat On Unexposed Surface. 12 Mm Thick , 10.16.1Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes , 10.25.1Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Stringers, Treads, Landings Etc. Of Stair Cases, Including Use Of Chequered Plate Wherever Required, All Complete , 11.41.2Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , 12.34Providing Fixing Thermal Insulation Of Ceiling (Under Deck Insulation) With Resin Bonded Fibre Glass Wool Conforming To Is : 8183, Density 24Kg I M3, 50 Mm Thick, Wrapped In 200 G Virgin Polythene Bags, Fixed To Ceiling With Metallic Cleats (50X50x3 Mm)@ 60 Cm And Wire Mesh Of 12.5 Mm X 24 Gauge Wire Mesh, For Top Most Ceiling Of Building. , 12.50Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , 12.51.1 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Ridges Plain (500 - 600Mm) , 12.51.2 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete :Flashings/ Aprons.( Upto 600 Mm) , 12.51.6 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete :Gutter (600 Mm Over All Girth) , 13.50.2Applying Priming Coat: With Ready Mixed Aluminium Primer Of Approved Brand And Manufacture On Resinous Wood And Plywood , 13.50.3Applying Priming Coat: With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works , 13.62.1 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture , 13.68.1French Spirit Polishing :Two Or More Coats On New Works Including A Coat Of Wood Filler , 16.69 Providing And Laying At Or Near Ground Level Factory Made Kerb Stone Of M-25 Grade Cement Concrete In Position To The Required Line, Level And Curvature, Jointed With Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Making Joints With Or Without Grooves (Thickness Of Joints Except At Sharp Curve Shall Not To More Than 5 Mm), Including Making Drainage Opening Wherever Required Complete Etc. As Per Direction Of Engineer In-Charge (Length Of Finished Kerb Edging Shall Be Measured To Calculate Volume For Payment). (Precast cement concrete Kerb Stone Shall Be Approved By Engineer-In-Charge). , 16.92Providing And Fixing 10X10x7.50 Cm Granite Stone Block Hand Cut And Chisel Dressed On Top, For Paving In Floors, Drains Etc. Laid Over 20 Mm Thick Base Mortar 1:4 (1 Cement : 4 Coarse Sand) With Joints 10 Mm Wide Filled With Same Mortar Including Ruled Pointing Etc. Complete As Per Direction Of Engineer-In-Charge. , 1-2Excavationinfoundationfor Retaining,Breastwallsetc, Inall Typesofsoils And Rocks Includingall Lead, Lift Anddisposal Of Surplusmaterial Asper Direction Of Engineer- In- Charge, As Per Drawing And Technical Specifications Clause 305.1 Of Mord Specifiction , 1-4 Randomrubblestonemasonry Laid In1:6Cement Andsandmortar, In Breastwalls,Retainingwalls,Parapets,Scuppers,Etc. Includingsupplyofall Material, Labour, T&Pand Royaltiies Etc. Complete As Per Drawingand Technical Specifications Clauses 702, 704, 1202 & 1203 Of Mord Specifiction , 1-3 Randomrubblestonemasonry Laiddry, Inbreastwalls, Retainingwalls, Etc. Including Supply Of All Material, Labour, T&P And Royaltiies Etc. Completeasper Drawingand Technical Specificationsclauses702, 704, 1202 & 1203 Of Mord Specifiction , 1-5 Handpackedstonefillinginbackofwallls Includingcostofallmaterials, Royality,T&Petc.Completeasperdirectionofengineer-In-Charge. (Asper Pwd Uttarakhand Specifications) , 2-2Concretewithcement, Coarsesandand40mmgaugestoneballast In Proportion1:4:8 In Foundationsand Floors Includingsupplyof Allmaterial, Labour Andt&Petc. Required For Proper Completionof Thework. Asper Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , 3-7Removal Of Unsuitable Soil With Disposal Upto 1000 M Removal Of Unsuitable Soil Including Excavation, Loading And Disposal Upto 1000 M Lead But Excluding Compaction Ground Supporting Embankment Subgradereplacement By Suitable Soil, Which Shall Be Paid Separately As Per Clause 303.5.2As Per Technical Specification Clause 302.3.11 , 12-9Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Technical Specification Clauses 614, 709, 1204.3.7 , Providing & Supplying Of 25W Self Ballasted Led , Providing & Supplying Of Decorative Lighting Pole Of 4M , Providing & Fixing Of Aayush Wellness Based Signages/Boards Including Vertical Pole & Ms Sheet , Providing & Fixing Of Aayush Wellness Based 3D Paintings With Pop Texture Including Texture Paint

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Uttarakhand View Result →

Housing Urban and Rular Development #11432178 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Uttarakhand View Result →

Power #11419246 AOC

Contract Date: Jun 30, 2026 Contract Value : ₹ 37.28 Lakh

Government Departments No of Bidders 7

Himachal Pradesh View Result →

Public Administrative Department #11418998 AOC

Tender For General-Aroor Gp 2024-25 Pro.No-145/25-Additional Construction In Mcf-General Civil Work - Constraction for machine Room 2 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared 3 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 4 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 5 OD304174/2024-2025:Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site 6 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) 7 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 8 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 9 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). 10 5.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars 11 50.2.25.1:Filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge 12 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 13 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 14 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 15 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm) 16 16.71:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer - in- Charge. 17 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete 18 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 19 13.3.2:20 mm cement plaster of mix:1:6 ( 1 cement : 6 fine sand) 20 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 21 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work 22 10.6.1:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover 23 10.7:Providing and fixing ball bearing for rolling shutters. 24 10.8.1:Extra for providing mechanical device chain and crank operation for operating rolling shuttersExceeding 10.00 sqm and upto 16.80 sqm in the area 25 4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 26 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 27 51.2.3:Filling with Quarry Muck
Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade 28 16.78.1:Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30 29 16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. 30 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete 31 9.121:Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 32 9.122.1:Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.

Contract Date: Jun 30, 2026 Contract Value : ₹ 21.18 Lakh

Government Departments No of Bidders 2

Kerala View Result →

Public Administrative Department #11417772 Price Bid

Tender For Repairing And Maintenance Of Civil Related Works In Ward No.19 (For The Year 2025-26)-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for thefoundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. One Number : As directed by Engineer-in-charge. Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, f oundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No.: Bd.F.17, Page No. 306 Ground Floor Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means Removing and Transporting of excavated / demolished material within PCMC limit including loading, unloading, stacking the material as directed by Engineer-in-charge etc. complete. (For Lead 10.0 Km). Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foun dation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (VSI sand finely washed etc ) Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foun dation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with WITHOUT SCADA with fine agreegates of required specifications (VSI sand finely washed etc ) Providing and laying in situ cement concrete of 1:2:4 proportion with trap/ granite/ quartzite/ gneiss metal in foun dation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (VSI sand finely washed etc ) Providing and laying in situ cement concrete of 1:2:4 proportion with trap/ granite/ quartzite/ gneiss metal in foun dation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer Page No - 3 without SCADA with fine agreegates of required specifications (Crushed sand / VSI grade ) Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material Granular Sub Base Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material (Note- As per circular issued by Hon. city engineer PCMC , vide civil/CE/TS/23/16/2023.Date 21/04/2023 .Rate is reducedby 20% as material is brought from PCMCs C and D waste processing plant.) Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - II Material Construction of granular Page No - 4 sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - II Material Note- As per circular issued by Hon. City Engineer, PCMC vide circular no.Civil/CE/TS/23/16/2023 Dated 21/04/2023, rate is reduced to 20% as material is to be brought from C and D work processing plant Supplying hard murum/ kankar at the road site, including conveying and stacking complete. Spreading hard murum/ soft murrum/ gravel or kankar for side width complete Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shadeetc. complete. Ground Floor Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel st anchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Lift 0.0 to 3.8 M Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. PARDI of required thickness including centering, formwork, cover blocks, laying/pumping ,compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural Page No - 6 steel). with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With Crushed sand VSI Grade. Spec. no.:- Bd.F.11 Page No. 304 and B.7, Page No. 38 Ground Floor Providing fly ash brick masonry with conventional / S. type fly ash bricks in C.M. 6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Providing fly ash brick masonry with conventional/ S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Lift 0.0 to 3.8 M Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints un exposed faces and watering etc.complete. Providing waterproof plaster W.C. and bath 20 mm thick dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete. Removing the tar or coba and disposing of the material as directed etc. complete. Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Ground Floor Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Ground Floor Lift 0.0 to 3.8 M Providing patti/ band 100mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. etc

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 6

Maharashtra View Result →

Public Administrative Department #11417771 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 8

Maharashtra View Result →

Educational and Research Institute #11408306 AOC

Contract Date: Ref. Documents Contract Value : ₹ 42.59 Lakh

Government Departments No of Bidders 5

Delhi View Result →

Public Administrative Department #11390437 AOC

Providing Wiring And Electrical Items For Anganwadi Schools At Ramannapeta In Division No. 60 In Khammam Municipal Corporation-1. Electrical Wiring Installation Is 732-1989 ( System Voltage Not Exceeding 650 V ) 2. Graphical Symbols Used In Electro-Technology Is 2032-1969 Art-Xi-Electrical Installation Buildings. 3. Fire Safety Of Building ( General ) Electrical Installation Is 1646-1961 4. Pvc Insulated Cables Is 694-1977 5. Pvc Insulated Cables ( Heavy Duty ) Is 1554-1964 6. 5 A Tumbler Switches Is 1087 7. 15A Tumbler Switches Is 2120 8. 3 Pin Plugs And Sockets Is 1293 9. Aluminum Conductors For Insulated Cables Is 1753-1967 10. Recommended Current Ratings For Cables Is 1961-1967 11. Installation And Maintenance Of Paper Insulated Is 1155-1967 Power Cables 12. Earthing Is 3043-1966 13. Rigid Steel Conduits For Electrical Wiring Is 9537-Pii-1989 14. Fittings For Electrical Wiring Is 2667-1964 15. Flexible Steel Conduits Electrical Wiring Is 3430-1966 16. Accessories For Rigid Steel Conduit Insulated Cables Is 3837-1966 17. A C Circuit Breakers Is 2516-1977 18. Heavy Duty Airbreak Switches And Fuses For Is 4047-1967 Voltage Not Exceeding 1000V 19. 11 Kv Xlpe Cables Is 7089-Part-Ii 20. Fuses Is 9224-P-I & Ii 21. Current Transformers Is 2705 22. Voltage Transformers Is 3516 23. Indicating Instruments Is 1248 24. Relays Is Is - 722 25. Integrating Instruments Is Is - 3231 26. Auxillary Contracts Is 2959 27. Auxillary Switches And Push Buttons Is 6875 28. A C Isolators And Earthing Switches Is 1818-1972 29. Central Gear For Voltage Not Exceeding 1000 V Is 4337-1967 30. Installation And Maintenance Of Switchgear Is 3072-1965 31. Enclosed Distribution Fuse Board And Cutouts Is 2675-1964 For Voltage 100 V 32. Airbreak Isolators For Voltage 1000 V Is 2607-1976 33. Marking Alignment Or Switchgear Bushers Main Is 375-1963 Connections And Auxillary Wiring 34. Selection Installation And Maintenance Of Fuses Is 3106-1966 ( Voltages Not Exceeding 650 V ) 35. General And Safety Requirements For Electric Is 1913-1969 Lighting Fittings 36. Lighting Public Thorough Fares Is 1944-1970 37. Waterproof Electric Lighting Fitting Is 3528-1966 38. Water Tight Electric Lighting Fittings Is 3553-1966 39. Luminaries For Street Lighting Is 2149-1970 40. Mild Steel Tubulars And Other Wrought Steel Is 1239-1968 Pipe Fittings 41. Ceiling Fans Is 374-1951 42. Transformers Is 2026-1962 43. Installation And Commissioning Of Transformers Is 1886-1967 44. Protecting Of Buildings And Allied Structures Is 2309-1967 Against Lighting 45. Interior Illumination Is 3636-1966 46. Busbar Ratings Is 8084-1976 47. Onload Change Over Switches Is 4064-1978 48. Alluminium Alloy For Bus Bars Is 5082 49. Factory Built Assemblies Of Switchgear And Is 8623 Control Gear 50. General Requirements Of Switchgear And Control Gear Is 4237 For Voltages Not Exceeding 1000 V. 51. Degree Of Protection Provided By Enclosing For Low Is 2147 Voltage Switchgear

Contract Date: Ref. Documents Contract Value : ₹ 1.69 Lakh

Local Bodies No of Bidders 1

Telangana View Result →

10.

Health and Family Welfare #11387303 AOC

Contract Date: Ref. Documents Contract Value : ₹ 26.89 Lakh

Government Departments No of Bidders 1

Telangana View Result →

11.

Health and Family Welfare #11383742 AOC

Contract Date: Ref. Documents Contract Value : ₹ 1.31 Crore

Government Departments No of Bidders 1

Telangana View Result →

12.

Public Administrative Department #11382445 AOC

Tender For Annual Plan-Pro.No 315/26 Crematorium Construction In Avanur Gp 2025-26-Avr 315/26-General Civil Work - Building construction 2 2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil 3 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 4 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 5 OD316310/2025-2026:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site . Modified from 60.7.1 6 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) 7 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 8 5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 9 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts 10 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 11 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete 12 2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. 13 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete 14 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15°landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III)derived from natural sources: 3 graded stone aggregate 20 mm nominal sizederived from natural sources). 15 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 16 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 17 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 18 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work 19 11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete 20 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 21 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) 22 21.3.3:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness(weight not less than 20 kg/sqm) 23 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 24 11.20.2:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Medium shade pigment using 50% white cement 50 % Grey cement 25 8.31:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 26 17.7.2:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap 27 17.2.2:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked black solid plastic seat and lid 28 50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 29 18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore 30 18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore 31 50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall 32 50.18.7.4.2:Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall 33 50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 34 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 35 17.29:Providing and fixing 100 mm sand cast Iron grating for gully trap. 36 OD325929/2025-2026:Supply and fixing PVC frame and shutter for doors of size of (0.8mX2.00m)including cost of labour and materials as per direction of departmental officers. 37 OD326277/2025-2026:Supplying and fixing Pressed Steel Door of standard pattern with frames as per profile of IS:4351 of section 105*60mm using 18G (1.2mm thick CRCA) sheet and shutters made of section 75*30mm of outer styles and horizontal members and then inserted with enclosed and stiffened sheet 26CR as per the specification with zinc chromate primer including all charges of fittings, conveyance etc, complete.steel door of size 120*210 cms 38 51.19.ST2:Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) 2. 15 to below 25 flush capacity 39 OD326287/2025-2026:Ferrow cement soak pit 75 cm dia and 75 cm height 40 50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. 41 50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. 42 10.6.2:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover 43 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 44 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 45 OD326395/2025-2026:supplying and fixing 150mm half cut section with brackets at the end of sheet or tiled roof for rain water collection including all cost and materials , conveyance, labour charges etc. 46 OD330008/2025-2026:Roofing with Premium Aluzinc roofing powder coated Tiled design sheet with matte finishing 0.5mm thick or nearest available thickness with overlaps of 150mm at ends and G I hook or screw or crank C I bolts and nuts including plain and bitumen washers etc completed.

Contract Date: Jun 27, 2026 Contract Value : ₹ 30.93 Lakh

Government Departments No of Bidders 3

Kerala View Result →

13.

Public Administrative Department #11367794 AOC

Tender for Annual Plan-Kondotty Municipality 2025-26-Proj No - 161/26 Fhc Renovationward - 28-General Civil Work--1 FHC HALL1.001 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete1.002 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete1.003 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work1.004 50.6.5.2:Hollow block masonry using pre cast blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part 1 of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete1.005 11.41.1:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm.1.006 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)1.007 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work1.008 OD430235/2025-2026:Supplying and fixing 10 mm thick cement fibre sheet, including all costs , conveyence and labour charges as per standard specifications.1.009 OD425528/2025-2026:Providing and fixing granite of any colour and shade for name board of required size laid over base of cement mortar 1:4 including all charges etc complete at all levels ,including lettering & fixing

Contract Date: Jun 25, 2026 Contract Value : ₹ 3.97 Lakh

Government Departments No of Bidders 2

Kerala View Result →

14.

Water Resources and Irrigation #11342285 AOC

Contract Date: Jun 23, 2026 Contract Value : ₹ 2.52 Crore

Local Bodies No of Bidders 1

Kerala View Result →

15.

Power #11334917 AOC

Contract Date: Jun 23, 2026 Contract Value : ₹ 5.85 Lakh

Government Departments No of Bidders 3

West Bengal View Result →

16.

Educational and Research Institute #11326523 Technical Bid

Tender For Purchase Of Non-Consumables For Physics Lab In Basic Engineering (First Year) Department = Limited- 2 Joule Calorimeter - Copper Vessel, Battery Eliminator 3A, (2,4,6,8,10,12 V), Tubular Rheostat 20-3.3A, One Way Plug Key, Analog Type Dc Ammeter (0 2A), Voltmeter (0-5V), Thermometer (Alcohol), Stop Clock 3 Ic Regulated Battery Eliminator- Ic Regulated, Input: 230V Ac; Output: 0-12V Dc In Steps Of 2V; Capacity: 1A Or 2A. 4 Galvanometer- Moving Coil Type, 30-0-30 Scale, Unbranded With Bhel Specification-Sensitivity 0.143Mm/V 5 Voltmeter- Dc Voltmeter; Range 0–10 V, Analog 6 Ammeter- Dc (0 - 2 Amp) 7 Parallelogram Apparatus- Parallelogram Law Of Forces Apparatus Fitted With Stand 8 Decade Resistance Box- Resistance Box 12 Month Warranty (Dial Type) -Manganin Coil- 2 Dials 9 Sonometer Apparatus- Sonometer With Meter Scale Attached Along With Knife Edge, Tuning Forks Set 256, 384, 512 Ranges, Hammer, Slotted Weight - 500 Gm Each To A Total Of 3 Kg. Brass Wire (5 M) 10 Travelling Microscope- Branded Travelling Microscope 0 200 Mm Horizontal And 0-150 Mm Vertical Measurement 11 Potentiometer - It Features A 1-Meter To 10-Meter Constantan/Manganin Wire Stretched On A Wooden Or Sunmica Baseboard With A Millimeter Scale. It Includes 4Mm Brass Terminals, A Pencil Jockey For Contact, Wire Options (10 Wires), And A Typical Resistance Range Of 10-20 Ohms, Ideal For High-Precision Voltage Measurements. 12 Viscosity Apparatus – StokeS Apparatus With Metre Scale Attached And Long Cylindrical Glass Jar, Glass Beads Small Size (1 Box), Screw Gauge (0-15 Mm) 13 Rheostat - High-Grade Ceramic Tube, Oxidized Resistance Wire, 0.5A 5A, Range 10Ω–100Ω. 14 Deflection Magnetometer Apparatus - Deflection Magnetometer Apparatus With Compass Box And Two Short Bar Magnets 15 Solar Cell Kit- The Apparatus Consist Of Variable Dc Power Supply, Led, Solar Cell And Two Multimeters (Or An Ammeter And A Voltmeter). A Variable Dc Power Supply Of 0 5V. Light Source Is Provided By Led. The Illumination Intensity Of The Led Can Be Controlled 16 Wheatstone Bridge Kit- Series Arm: Four Decade Dials In Steps Of Thousands, Hundreds, Tens, & Units Of OhmS. Ratio Arm: The Ratio Arm Of The Bridge Is Capable Of Selecting Multiplying Factor Of 0.001, 0.01, 0.1, 1, 10, 100, 1000 For Resistance Measurements. Two Press Keys Are Provided, One Marked B Is For Battery & One Marked G Is For Galvanometer One Toggle Switch Is Provided For Internal Battery A Sensitive Galvanometer Is Provided In The Bridge. 17 OhmS Law Verification Kit- Battery Eliminator-3A, (2,4,6,8,10,12 V), Tubular Rheostat 20-3.3A, One Way Plug Key, Analog Type Dc Ammeter (0-2A), Voltmeter (0-5V), Standard Resistance Coil Of 1, 2 Ohm (2-Set) Wound On A Wooden Bobbin 18 Boyle’S Law Apparatus - The Apparatus Includes The Quill Tube, A Retort Stand, A Clamp, And A Mounted Meter Scale. Quill Tube Specifications: Length: Approximately 50 Cm. Bore Diameter: Uniform Bore, Roughly 1 Mm To 2 Mm. Construction: Glass Tube With One End Sealed. Trapped Substance: A Mercury Pellet (Or Thread) Of Length 10 To 15 Cm Is Introduced To Enclose A Column Of Air. Mounting: Attached To A Half-Meter Or Meter Scale. 19 Torsional Pendulum - Torsional Pendulum Metallic Disc, Symmetrical Masses And Pendulum Stand, Steel Wire 20 Compound Bar Pendulum- One Meter Long Iron Strip Well Painted With Holes At A Distance Of Every 5 Cm And Also With Pair Of Brackets And A Heavy Base Table Top Stand With Stop Clock 21 Helical Spring Apparatus-- Structure: A Rigid Support Mounted On A Heavy Metal Base, Typically Cast Iron, To Ensure Stability During Tests. Springs: High-Tensile Steel Spiral Springs, Typically (Approx 25 Mm) Diameter, (100 Mm) Long. Measurement Scale: A Vertical Steel Meter Scale, Usually With (1Mm) Graduations, For Precise Deflection Measurement. Loading Mechanism: A, Typically (50G), Hook-Attached Weight Hanger At The Bottom.Pointer: A Fine Pointer Attached To The Bottom Of The Spring Moves Along The Scale. Accessories: Includes A Set Of Slotted Weights (E.G., (6Times 50G) Or Similar Sets) For Incremental Loading.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Tamil Nadu View Result →

17.

Public Administrative Department #11325415 AOC

Contract Date: Jun 22, 2026 Contract Value : ₹ 4.23 Lakh

Government Departments No of Bidders 1

Kerala View Result →

18.

Rural Development #11325109 AOC

Contract Date: Jun 22, 2026 Contract Value : ₹ 694

Government Departments No of Bidders 2

Tripura View Result →

19.

Heavy Industries and Public Enterprises #11321092 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Assam View Result →

20.

Educational and Research Institute #11307517 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Kerala View Result →

21.

Public Administrative Department #11300743 AOC

Contract Date: Jun 17, 2026 Contract Value : ₹ 24.12 Lakh

Government Departments No of Bidders 2

Kerala View Result →

22.

Public Administrative Department #11300261 AOC

Tender For Annual Plan-161/25-GREENVALLY DWSSBORE WELLWARD-6-General Civil Work--- 1 Dws- 2 OD496514/2024-2025:Drilling charge of 110 mm bore well 3 OD496513/2024-2025:casing pipe 140 mm dia 6kg/cm2 PVC 4 OD496512/2024-2025:Cost of 1 No 140 mm dia PVC end cap 5 OD496516/2024-2025:Supply and fixing 5 hp motor pump of approved brands including all cost of conveyance labour etc complete 6 OD496520/2024-2025:Supply and fixing pump starter with control panel for 5 hp mortor pump setincluding all cost of conveyance labour etc complete 7 OD496511/2024-2025:Supply and fixing 3 phase pnnel board including all cost of conveyance labour etc complete 8 OD496515/2024-2025:Supply and fixing 6 mm cable including all cost of conveyance labour etc complete 9 OD496518/2024-2025:Supplying 16 mm plastic rope 10 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 11 OD496519/2024-2025:1.001- Specification code: Supplying and fixing 40 mm dia 10 kg/cm2 HDPE pipe PE - 80 including specials and all fitting charges but excluding trenching and refilling etc. complete. 12 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 13 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 14 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) 15 OD521302/2024-2025:DR RUBBLE MASONARY, -Dry rubble without concrete levelling course masonary with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc.complete as per direction of departmental officers at site 16 50.6.2.3:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete 17 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 18 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 19 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 20 9.117.1:Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mm 21 9.118.1:Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of H section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. U cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter). 22 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 23 OD514527/2024-2025:Providing nad fixing 0.35mm thick GI tile profile/traffold sheets roofing up to any pitch and fixing with polymer coated J or L hooks ,bolts and nuts 8mm dia GI plain and bitumen washer or with self drilling fastener and EPDM washers etc.complete (excluding cost of purlin rafters and trusses)including cutting sheets to size and shape wherever required 24 OD503716/2024-2025:Supplying and fixing RCC Door frame 80*195 25 OD496517/2024-2025:Granite name board

Contract Date: Jun 16, 2026 Contract Value : ₹ 3.99 Lakh

Government Departments No of Bidders 1

Kerala View Result →

23.

Public Administrative Department #11300148 AOC

Contract Date: Jun 16, 2026 Contract Value : ₹ 4.10 Crore

Government Departments No of Bidders 2

Assam View Result →

24.

Housing Urban and Rular Development #11299927 AOC

Contract Date: Jun 15, 2026 Contract Value : ₹ 19.78 Lakh

Government Departments No of Bidders 5

Uttarakhand View Result →

25.

Educational and Research Institute #11294674 Price Bid

Tender for Purchase Of Equipments ( S.No 1 To S.No 21 ) For Physics Department , Purchase Of Equipments , Joule Calorime Copper Vessel, Battery Eliminator-3A, (2,4,6,8,10,12 V), Tubular Rheostat 20-3.3A, One Way Plug Key, Analog Type Dc Ammeter (0-2A), Voltmeter (0-5V), Thermometer (Alcohol), Stop Clock , Ic Regulated Battery Eliminator Ic Regulated, Input: 230V Ac; Output: 0-12V Dc In Steps Of 2V; Capacity: 1A Or 2A , Galvanometer Moving Coil Type, 30-0-30 Scale, Unbranded With Bhel Specification-Sensitivity 0.143Mm/V , Voltmeter Dc Voltmeter; Range 0-10 V, Analog , Ammeter Dc (0 - 2 Amp) , Parallelogram Apparatus Parallelogram Law Of Forces Apparatus Fitted With Stand , Decade Resistance Box Resistance Box 12 Month Warranty (Dial Type) -Manganin Coil- 2 Dials , Sonometer Apparatus Sonometer With Meter Scale Attached Along With Knife Edge, Tuning Forks Set 256, 384, 512 Ranges, Hammer, Slotted Weight - 500 Gm Each To A Total Of 3 Kg. Brass Wire (5 M) , Travelling Mircroscop Branded Travelling Microscope 0- 200 Mm Horizontal And 0-150 Mm Vertical Measurement , Potentiometer It Features A 1-Meter To 10-Meter Constantan/Manganin Wire Stretched On A Wooden Or Sunmica Baseboard With A Millimeter Scale. It Includes 4Mm Brass Terminals, A Pencil Jockey For Contact, Wire Options (10 Wires), And A Typical Resistance Range Of 10-20 Ohms, Ideal For High-Precision Voltage Measurements. , Viscosity Apparatus Stokes Apparatus With Metre Scale Attached And Long Cylindrical Glass Jar, Glass Beads Small Size (1 Box), Screw Gauge (0-15 Mm) , Rheostat High-Grade Ceramic Tube, Oxidized Resistance Wire, 0.5A-5A, Range 10Ω-100Ω. , Deflection Magnetometer Apparatus Deflection Magnetometer Apparatus With Compass Box And Two Short Bar Magnets , Solar Cell Kit The Apparatus Consist Of Variable Dc Power Supply, Led, Solar Cell And Two Multimeters (Or An Ammeter And A Voltmeter). A Variable Dc Power Supply Of 0-5V. Light Source Is Provided By Led. The Illumination Intensity Of The Led Can Be Controlled , Wheatstone Bride Kit Series Arm: Four Decade Dials In Steps Of Thousands, Hundreds, Tens, & Units Of Ohms. Ratio Arm: The Ratio Arm Of The Bridge Is Capable Of Selecting Multiplying Factor Of 0.001, 0.01, 0.1, 1, 10, 100, 1000 For Resistance Measurements. Two Press Keys Are Provided, One Marked B Is For Battery & One Marked G Is For Galvanometer One Toggle Switch Is Provided For Internal Battery A Sensitive Galvanometer Is Provided In The Bridge. , OhmS Law Verification Kit Battery Eliminator-3A, (2,4,6,8,10,12 V), Tubular Rheostat 20-3.3A, One Way Plug Key, Analog Type Dc Ammeter (0-2A), Voltmeter (0-5V), Standard Resistance Coil Of 1, 2 Ohm (2-Set) Wound On A Wooden Bobbin , BoyleS Law Apparatus The Apparatus Includes The Quill Tube, A Retort Stand, A Clamp, And A Mounted Meter Scale. Quill Tube Specifications: Length: Approximately 50 Cm. Bore Diameter: Uniform Bore, Roughly 1 Mm To 2 Mm. Construction: Glass Tube With One End Sealed. Trapped Substance: A Mercury Pellet (Or Thread) Of Length 10 To 15 Cm Is Introduced To Enclose A Column Of Air. Mounting: Attached To A Half-Meter Or Meter Scale. , Torsion Pendulum Torsional Pendulum Metallic Disc, Symmetrical Masses And Pendulum Stand, Steel Wire , Compound Bar Pendulum One Meter Long Iron Strip Well Painted With Holes At A Distance Of Every 5 Cm And Also With Pair Of Brackets And A Heavy Base Table Top Stand With Stop Clock , Helical Spring Apparatus Structure: A Rigid Support Mounted On A Heavy Metal Base, Typically Cast Iron, To Ensure Stability During Tests. Springs: High-Tensile Steel Spiral Springs, Typically (Approx 25 Mm) Diameter, (100 Mm) Long. Measurement Scale: A Vertical Steel Meter Scale, Usually With (1Mm) Graduations, For Precise Deflection Measurement. Loading Mechanism: A, Typically (50G), Hook-Attached Weight Hanger At The Bottom.Pointer: A Fine Pointer Attached To The Bottom Of The Spring Moves Along The Scale. Accessories: Includes A Set Of Slotted Weights (E.G., (6Times 50G) Or Similar Sets) For Incremental Loading. , Meter Bridge Type: 1 M Length, With Uniform Wire (Resistance Wire) Material: Constantan Or Manganin (Low Temperature Coefficient) Scale: 0-100 Cm, Engraved Or Printed Base: Wooden Or Metal, Rigid, Non-Conductive Support Joints / Terminals: Brass Or Copper, Fixed For Connections 2. Galvanometer Type: Analog, Moving Coil Or Digital (For Null Detection) Range: Sensitive To Detect Micro-Ampere Currents Internal Resistance: High, Typically ~100 Ω Or As Specified 5. Cells / Power Supply Type: Leclanché Cells (1.5 V Each) Or Dc Power Supply Number: 2-4 Cells In Series (Or Supply ~3-6 V) 1

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 8

Tamil Nadu View Result →

26.

Public Administrative Department #11290947 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 142

Uttar Pradesh View Result →

27.

Housing Urban and Rular Development #11287952 Technical Bid

Tender for Construction Of Temporary Pandals, Barricades, Sheds, Temporary Offices And C S Etc. At Location- (1) Kamakhya Railway Station, Maligaon (2) Pandu Port (3) Naharbari Field (4) Bongshi Bagan And Other Temporary Structures At Different Locations From Foot Hills To Main Entrance Of Maa Kamakhya Temple In Connection With The Ambubachi Mahayog, 2025 At Guwahati. (Civil Works) , Erection Of German Technology Aluminium Structure As Per Manufacturer Specification With Pvc Tensile Fabric Fitted To Frames With Necessary Cross Bracing, Wind Tie & Struts As Necessary (All Materials Are Contractors Property) , Construction Of Pandel Made With Bhaluka Bamboo Post 100Mm To 150Mm Dia And Sal Bali Post Of Various Length From Eve Point To Ridge Point Driven Atleast 90Cm. For Soil Boil Post & 75Cm For Bhaluka Bamboo Posts On The Ground With Jati Bamboo Roof Base As Per Drawing Type With Coir Rope Including Jati Bamboo Brasing Alternative Post Sal Timber Bali Posts One To Be Provided In Two Middle Rows At 4.55M Apart And Bhaluka Bamboo Post In Other At 3.00 Apart. The Jati Bamboo Rafter Should Be Fixed At Ground As Directed And Specified And Dismantling The Pandal After The Function Within Three Days Time. (The Bamboo & Coir Rope Etc. Will Be Contractors Property) Work To Be Executed As Directed By The Department. Pandel Made With Bhaluka Bamboo Post With Eve Height 4.20M & Ridge Height 13.70M. , Fitting & Fixing Pvc Fire Resitant Tarpolin Over The Steel Roof/Bamboo Roof Truss Frame And Plastic Rope Etc. And Removing The Same After The Function As Directed. (All The Materials Are Contractors Property) , Kutchi Design Cloth Decoration In Ceiling Of The Pandal And Side Decoration Of The Pandal With Kutchi Design Cloth Etc.Complete As Directed.(All The Materials Are Contractors Property) , Providing View Cutter With Heavy Duty Rope Over The Tarpolin Roofing Walling Etc. Complete As Directed. , Temporary Wooden Flooring 150Mm Height Over The Ground With 19Mm Thick Ply Wood Including Fitting And Fixing With Iron Screw, Nails Etc. As Directed By The Deptt. , Hire Charge Of Red Carpet Including Carriage As Directed By The Department. , Erection Of Steel Tubular Pipe (60.3Mm Od) Barricading Of 1.50M High With Steel Pipe Post @1.80M C/C Driven At Least 0.60M With 4 Nos Of Horizontal Steel Pipe Railing Tied With Nut And Bolt With Vertical Member Complete Including All Cost Of Carriage And Labour For Construction As Well As Removing The Same After The Function Is Over As Directed And Specified By The Department. (The Dismantled Steel Pipes Received From Dismantlimg Of Barricade Will Be The Contractor Property After Adjusting Salvage Value) , Hire Charge Of Plastic Chairs Including Carriage As Directed By Department. , Hire Charge Of Table , Construction Of Stage Of 2.00 M High With 50Mm Dia Steel Pipe Fixing With Cross Pipe With Bolt And Nut. The Post Are At A Distance Of 1.20 M Apart And The Platform With......... Steel Frame Staircase As Directed By The Department. (All The Materials Are Contractors Property) , Hire Charge Of Vip Chairs Including Carriage As Directed By Department. , Hire Charge Of Sofa Set As Directed By The Department. , Flower Decoration For Stage With Natural Flower And Flower Tubs Including Carriage Complete. , Construction Of Vvip Toilet Block Of Size 3.65 X 2.50M With All Fitting Fixings Etc. , Providing Bamboo Barricade With Bamboo Post Of Ht. 2.10 M Above The G.L. And .60M Below The G.L At An Interval Of 1.5M Having 2.00M Length And Fixing Of Jati Bamboo Horizontally At Interval Of .50Mc/C With Carriage As Directed By The Deptt. (After Completion The Function, The Contractor Is Allowed To Collect And Clearing The Unserviceable Bamboo From The Site) , Hire Charge For Podium , Hire Charge For Wooden Chair , Hire Charge For Proper Arrangement Of Coffee Tables To Be Made For Vip And Vvip Sitting Area.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Assam View Result →

28.

Housing Urban and Rular Development #11286216 AOC

Contract Date: Jun 13, 2026 Contract Value : ₹ 1.68 Crore

Local Bodies No of Bidders 2

Tamil Nadu View Result →

29.

Defence #11281747 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 5

Rajasthan View Result →

30.

Tourism #11266721 AOC

Contract Date: Jul 03, 2026 Contract Value : ₹ 5.42 Crore

Government Departments No of Bidders 2

Goa View Result →

31.

Public Administrative Department #11258623 AOC

Contract Date: Feb 26, 2026 Contract Value : ₹ 19.94 Lakh

Local Bodies No of Bidders 3

Maharashtra View Result →

32.

Housing Urban and Rular Development #11229363 AOC

Contract Date: Jun 04, 2026 Contract Value : ₹ 15.18 Lakh

Government Departments No of Bidders 2

Maharashtra View Result →

33.

Educational and Research Institute #11223212 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 6

Jammu And Kashmir View Result →

34.

Housing Urban and Rular Development #11221367 AOC

Tender For Construction Of New School Building For Upgradation From Secondary To Higher Secondary School Under Samagra Shiksha, Assam At Luitporia Missing High School, Jorhat District. (Furniture Works) , Additional Classroom: Desk Cum Bench: Overall Dimension 1800 X 850-900 X 740-750. Desk 1000 X 378 X 750 Mm. Bench 1800 X 335 X 437Mm. The Height/Depth Of The Backrest Should Be 265 Mm. The Desk, Seal & Backrest Should Be Made Of 18 Mm Thick Pre Laminated Mdf Board Isi Marked With Laminate Pasted On Top And Edges With Machine Pressed Pvc Edge Bading Sealed With Hot Melt Eva Glue. The Understructure Should Be Made Of 25.4 X 25.4 X 1.2 Mm Thick 60-70 Micron Epoxy Powder Coated Ms Tubes. Storage Shelf Should Be Made Of 0.6 Mm Thick Powder Coated Affixed Below The Desktop. The Front Side Covered With Modesty Panel Mode Of 1Mm Thick Crca Ms Steel Of Size 1800 X 150 (H) Mm & Edges Sealed With Pvc Bands With Provision Of Two Metal Hooks For Hanging School Bags Fixed At Ends. Make: Godrej/Wipro/Nilkamal/Brahmaputra Automobiles Pvt.Ltd/Methodex/ Any Other Reputed Brand Approved By The Department. , Teachers Table: Table Dimension 900 X 600 X 740-750Mm With One Drawer. The Table Top Made Of 19Mm Mdf Board Isi Mark With 1Mm Laminate Pasted On Top With Edge Rounded And Machine Pressed & Sealed With 2Mm Pvc Band Sealed With Hot Melt Eva Glue. The Under Structure/Frame Will Be Of Tubular Frame Of Square Tubes Size 25.4 X 25.4 X 1.2Mm Thick Powder Coated With 60-70 Micron. The Shell Of Drawer Is To Be Made Of 0.5Mm Thick Crca Ms With Metal Lock. Make: Godrej/Wipro/Nilkamal/Brahmaputra Automobiles Pvt.Ltd/Methodex/ Any Other Reputed Brand Approved By The Department. , Teachers Chair: Chair With Arm Made Of Natural And Biodegradable Material With Seal & Back Made Of Polyurethane Foam Covered With Fabric. The Dimension Of The Chair Shall Not Be Less Than The Following: 1.Overall Height: 850Mm 2.Seating Height:455Mm 3.Width:540Mm. Depth:500Mm Make: Godrej/Wipro/Nilkamal/Brahmaputra Au

Contract Date: Jun 04, 2026 Contract Value : ₹ 31.09 Lakh

Government Departments No of Bidders 3

Assam View Result →

35.

Drinking Water Supply and Sanitation #11219074 AOC

Tender for Providing Water Supply In P.M. Sri Kasturba Gandhi Balika Vidyalay, Dhanwar , Block- Rajdhanwar With 1 H.P. Solar Motor Pump Complete Set And 200 Mm X 165 Mm X 175 Mtr Deep Hydt, Along With Reinforced Cement Concrete Foundation,Construction Of Galvanized Tubular Steel Structure Staging For (6.00 M), Hdpe Water Storage Tank & Solar Panel. 5000 Ltr. Capacity Water Storage Hdpe Tank With 10 Nos. functional house hold tap connection Including Plateform & Stand Post Under Drinking Water And Sanitation Division-02, Giridih.(Untied Fund)

Contract Date: Jun 05, 2026 Contract Value : ₹ 8.22 Lakh

Government Departments No of Bidders 2

Jharkhand View Result →

36.

Power #11206303 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Jammu And Kashmir View Result →

37.

Public Administrative Department #11198050 AOC

Contract Date: Jun 01, 2026 Contract Value : ₹ 21.15 Lakh

Government Departments No of Bidders 1

Kerala View Result →

38.

Educational and Research Institute #11191898 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Kerala View Result →

39.

Educational and Research Institute #11191269 AOC

Contract Date: Jun 06, 2026 Contract Value : ₹ 6.64 Crore

Government Departments No of Bidders 8

Maharashtra View Result →

40.

Power #11177233 AOC

Tender For The Various Dcw Works And Improvement Works In O And M Perambalur Division; 1 Excavation of Pole Pits for poles upto 8.00m length by using JCB/Manual (1.25 X 0.6 X 1.5M) 2 Excavation of Pole Pits for pole above 8.00m length by using JCB/Manual (1.25x06x1.83M) 3 Excavation of Pole Pits in Hard Soil (common to all size of poles) 4 Excavation of Pole Pits in rocky area (common to all size of poles) by blasting / Manual 5 Excavation of Stay pit of 4.5 to 5 depth using JCB / Manual (0.95 X 0.6 X 1.2 M) 6 Excavation of Stay pit in Hard rock soil (0.95 X 0.6 X 1.2 M) 7 Erection of RCC, REC, PSC poles upto 8.00m length by using Crane / Manual 8 Erection of RCC, REC, PSC poles above 8.00m length by using Crane / Manual 9 Erection of metal supports above 9m / RSJ / Rail Pole/Tubular Poles 10 Erection of stay set complete with fixing up stay wire Eye, Bow, Guy Shackle, Binding etc. excluding stay pit excavation 11 Erection of additional Stay in the same stay rod, excluding excavation of stay pit and burial of stay rod. 12 Fixing of V cross arm 3.5feet 13 Fixing of V cross arm4.5 feet 14 Fixing ofV cross arm5.0 feet 15 Fixing of Fixing of LT S phase cross arm 16 Fixing of Fixing of LT 3 phase cross arm 17 Fixing of Fixing of HT / LT Ti fitting 18 Fixing of Fixing of HT PIN insulator with Pin 11 kv 19 Fixing of HT PIN insulator with Pin 22 kv 20 Fixing of HT PIN insulator with Pin 33 kv 21 Fixing of LT PIN insulator with pin 22 Fixing of HT strain disc 11 KV with Metal parts 23 Fixing of HT strain disc 22 KV with Metal parts 24 Fixing of HT strain disc 33 KV with Metal parts 25 Fixing of Tapping cross arm 26 Fixing of Two Tapping cross arm per cut point upto 33 KV line including fixing of Discs,insulators and Jumpering etc.. 27 Fixing of Top Channel 28 Fixing & erection of Cross bracing 29 Fixing of shackle with Metal parts 30 Fixing of Aluminium knob 31 Fixing of HT LAS (3 Nos.) 32 Paving and stringing of conductors of sizes upto 7/2.59 mm ACSR or other equivalent conductor 33 Paving and stringing of conductors ofabove7/2.59 mm ACSR or other equivalent conductor upto 7/3.35mm ACSR or other equivalent conductor 34 Paving and stringing of conductors of7/4.09mm ACSR or other equivalent conductor 35 Paving and stringing of conductors of7/4.72 mm Dog Conductor or other equivalent conductor 36 Releasing and reerection (resagging) of one run of all sizes of conductor 37 Complete Erection of Double Pole Distribution Transformer structureas per TNEB standard likepole pit excavation & erection, stay pit excavation and erection, feeders arrangement, Open type fuse unit,HT / LT LAS and jumpering, 3 Nos Earth pits with earth trough, concreting,coping, Colour washing of RCC poles, Painting of Structure Materials (including cost of paint(red oxide,Aluminium) and distember), Danger Board fixing etc.. (excludingerection of Distribution Transformer) 38 Erection of11 KV/22 KV single pole Structure includingerection of DT complete with centre support with pole pit excavation & erection, stay pit excavation and erection, feeders arrangement, Open type fuse unit, HT /LT LAS and jumpering, 3Nos earth pits with earth trough, structure earthing complete, concerting,coping, colour washing of RCC poles, painting of structure materials (including cost of paint (red oxide,aluminum)and distermber), danger board fixing etc..(exculding erection of distribution transformer) (Data as per Annexure III) 39 Erection of distribution transformer inculding loading of distribution transformer at stores and erection at structure or vice versa. Upto 25 KVA distribution transformer/metering set. 40 Erection of Distribution Transformer including loading of Distribution Transformer at stores and erection at structure or vice versa. Upto 25 KVA to 100 KVA 41 Failed DT replacement below 100 KVA 42 Failed DT replacement 100 KVA and above 43 Erection of DP structure with stay as per TNEB standard including fixing of top channel, cross bracing, HG Fuse Unit, concreting, painting, colour washing etc., With 11 KV AB switch using all types of poles of size 9.14 m and above length 44 Erection of DP structure with stay as per TNEB standard with 22/33 KV AB switch using all types of poles of size 9.14 m and above lenth including fixing of top channel, cross bracing, HG Fuse Unit, concreting, painting, colour washing etc., 45 Erection of single pole DP with completewith earthing 46 Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour)Mass concreting of poles with coping 0.6MX 0.45MX1.25M 47 Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour)Sleeveconcreting with coping 0.6MX 0.6MX0.3M 48 Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour)Stay concreting with coping 0.3M dia and 0.75 long 49 Earthing of poles with GI wires 4 or 6 SWG by coil earthing 50 Provision of spike with earthing arrangement including material (other than clamps & GI wire ) and fabrication 51 Pipie earthing including excavation of earth pit and fixing earth pipe 3 m length 52 Replacing the corroded earth pipes of transformer structure and replacing the earth wire completely with aluminium lugs for termination 53 Replacement of corroded earth pipe 54 Erection of fourth Earth pipe including earthing 55 Loading& unloading of REC, RCC, PSC pole upto 8.00 m length 56 Loading& unloading of All REC, RCC pole above 8.00 m length 57 Loading of Conductor with ramp 58 Unloading of Conductor with ramp 59 Loading of Iron & Steel 60 Unloading of Iron & Steel 61 Loading of line materials (Including Stacking except conductor drum & scrap material) 62 Unloading of line materials (Including Stacking except conductor drum & scrap material) 63 Loading of 11 KV disc 64 Unloading of 11 KV disc 65 Loading of LT Pin insulator shackle, guy shackle, LT Pin, Metal parts, HT pin etc., 66 Unloading of LT Pin insulator shackle, guy shackle, LT Pin, Metal parts, HT pin etc., 67 Loading of scrap materials 68 Unloading of scrap materials 69 Transportation of all types and sizes of poles and other associated materials from Road side to pole pit and vice versa upto 1.0 KM 70 Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) For a lead upto 5 KM 71 Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) Above 5 KM of lead of every KM 72 Transporting of Distribution Transformer / Line materials from stores to office / site upto 10KM distance by engaging 1 Ton capacity Minidor (Lorry) 73 Transporting of Distribution Transformer / Line materials from stores to office / site Above 10 KM distance by engaging 1 Ton capacity Minidor (Lorry) 74 Provision of guarding with two numbers earth pits excluding stay set erection - gradle guarding including earthing and earth pit excavation without material 75 Dismantling of RCC, REC, PSC & metal pole of all sizes including the closing of the pit 76 Dismantling of stay set complete including stay rod 77 Dismantling of conductor ofupto 7/3.35 including transporting the conductors to the nearest road side and stocking in coils 78 Dismantling of conductor ofabove 7/3.35 including transporting the conductors to the nearest road side and stocking in coils 79 Dismantling of Transformer structure materials complete set and transporting the same from the location to the road side 80 Releasing of LT S ph X Arm with all accessories 81 Relaasing of LT 3 ph X Arm with all accessories 82 Releasing of 3 - 6 V Cross Arm/Tapping channal/GuardingX Arm with all accessories 83 Releasing of 4 - 6 andV Cross Arm with all accessories 84 Releasing of5V Cross Arm with all accessories 85 Releasing of Distn.Tr. Only at field - Upto 25 KVA / Metering set 86 Releasing of Distn.Tr. Only at field- Above 25 KVA and upto 100KVA 87 Dismantling of structure poles 88 Painting of iron poles up to 36 ft length with double coats including cost of paint 89 Painting of iron poles up to 40 ft 200/100 length with double coats including cost of paint 90 Painting of structure materials distribution transformers with aluminium paint of structure poles and writing of transformer details (Paint to be supplied by Department) 91 Labour charges for alteration of back clamp 92 Labour charges for alteration of Stay clamp 93 Providing of holes all size angles/Channel upto 3/4 94 Providing of holes all size angles/Channel above 3/4 95 Clearing of tree branches of coconut tree 96 Clearing of tree branches of Neem, Tamarind, Country tree 97 Clearing of karruvelam 98 Converting pin point into cut point in HT Lines 99 Converting pin point into cut point in LT Lines (single / Three phase) 100 Resagging of lines for all sizes cut point location 101 Set right of leaning poles both HT & LT (Pin point ) 102 Set right of leaning poles both HT & LT ( Cutpoint) 103 Replacement of Guy Shackle only in Existing Stay 104 Replacement of 11KV Polymer Pin Insulator 105 Replacement of 22KV Polymer Pin Insulator 106 Replacement of 33KV Polymer Pin Insulator 107 Replacement of 11KV Disc 108 Replacement of 22KV Disc 109 Fencing of Distribution Transformer Structure at Road side- Fabrication and Erection including all materials (Chain link fencing)

Contract Date: May 26, 2026 Contract Value : ₹ 25.00 Lakh

Boards / Undertakings / PSU No of Bidders 2

Tamil Nadu View Result →

41.

Public Administrative Department #11176954 AOC

Tender For Annual Plan-Dp Pkd 2025-26 Ghs Thenkurissi In Thenkurissi Gp--1 Ghs Building Maintenance 1.001 15.31:Dismantling Tiled Roofing With Battens, Boarding Etc. Complete Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. 1.002 15.14.1:Dismantling Wood Work In Frames, Trusses, Purlins And Rafters Up To 10 Metres Span And 5 Metres Height Including Stacking The Material Within 50 Metres Lead:Of Sectional Area 40 Square Centimetres And Above 1.003 10.16.1:Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Hot Finished Welded Type Tubes 1.004 Od388171/2025-2026:Departmental Ridge Tile- Laying On Roof Pressed Clay Tile Ridge (Mangalore Tile) Of 20 Mm Thickness And Of Approved Pattern On Steel Frame Work Complete (Steel Frame Work To Be Paid Separately ). 1.005 Od388172/2025-2026:Departmental Tile- Fixing On Roof Pressed Clay Tile (Mangalore Tile) Of 20 Mm Nominal Thickness And Of Approved Size And As Per Approved Pattern On Steel Frame Work Complete (Steel Frame Work To Be Paid Separately) 1.006 12.48:Providing & Fixing On Roof Pressed Clay Tile (Mangalore Tile) Of 20 Mm Nominal Thickness And Of Approved Size And As Per Approved Pattern On Steel Frame Work Complete (Steel Frame Work To Be Paid Separately) 1.007 12.49:Providing & Laying On Roof Pressed Clay Tile Ridge (Mangalore Tile) Of 20 Mm Thickness And Of Approved Pattern On Steel Frame Work Complete (Steel Frame Work To Be Paid Separately ). 1.008 15.7.4:Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.In Cement Mortar 1.009 2.8.1:Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Up To 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.All Kinds Of Soil 1.01 Od388189/2025-2026:60.7.1 Dry Rubble Masonry _ Dry Rubble Without Concrete Levelling Course Masonry With Good Quality Blasted Rubble Including Packing To Compactness To Lines And Levels Cost And Conveyance Of All Materials Labour Charges Etc. Complete As Per Direction Of Departmental Officers At Site 1.011 7.1.1:Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size) Up To Plinth Level With:Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) 1.012 5.9.2:Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Walls (Any Thickness) Including Attached Pilasters, Butteresses, Plinth And String Courses Etc. 1.013 5.1.2:Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level:1:1:5:3 (1 Cement 1.5 Coarse Sand :3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) 1.014 5.22.6:Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Levelthermo - Mechanically Treated Bars Of Grade Fe-500D Or More 1.015 13.1.1:12 Mm Cement Plaster Of Mix:1:4 ( 1 Cement : 4 Fine Sand) 1.016 4.1.8:Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level:1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) 1.017 13.1.2:12 Mm Cement Plaster Of Mix:1:6 (1 Cement : 6 Fine Sand). 1.018 13.88:Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. 1.019 13.111.2:Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade :Old Work (One Or More Coat Applied @ 0.90 Ltr/10 Sqm). 1.02 12.50:Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.50 Mm (+0.05%), Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling/Self Tapping Screws Of Size (5.5X55Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 1.021 Od388221/2025-2026:Supplying And Fixing 160Mm Dia Pvc Rain Water Gutter Semi Circular Section Including Fitting With 32Mmx5Mm Ms Flat Supporters At 1M Interval Etc Complete 1.022 50.6.1.5:Solid Block Masonry Using Pre Cast Solid Blocks ( Factory Made) Of Size 30X20X20Cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level Thickness 20Cm And Above In: Cm 1:6 ( 1 Cement : 6 Coarse Sand) Etc Complete 1.023 2.33.1:Felling Trees Of The Girth (Measured At A Height Of 1 M Above Ground Level) Including Cutting Of Trunks And Branches, Removing The Roots And Stacking Of Serviceable Material And Disposal Of Unserviceable Material.Beyound 30 Cm Girth Up To And Including 60 Cm Girth 1.024 2.33.2:Felling Trees Of The Girth (Measured At A Height Of 1 M Above Ground Level) Including Cutting Of Trunks And Branches, Removing The Roots And Stacking Of Serviceable Material And Disposal Of Unserviceable Material.Beyound 60 Cm Girth Up To And Including 120 Cm Girth

Contract Date: May 26, 2026 Contract Value : ₹ 14.20 Lakh

Government Departments No of Bidders 2

Kerala View Result →

42.

Housing Urban and Rular Development #11175999 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Rajasthan View Result →

43.

Educational and Research Institute #11161433 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 10

West Bengal View Result →

44.

Public Administrative Department #11142241 AOC

Contract Date: May 21, 2026 Contract Value : ₹ 4.09 Crore

Local Bodies No of Bidders 2

Maharashtra View Result →

45.

Water Resources and Irrigation #11140970 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Uttarakhand View Result →

46.

Public Administrative Department #11140214 AOC

Construction 2 Nos of Toilet (i) at Hedia SSK, Atharobanki, Hediar Abad (ii) at Hedia Noboday SSK, Atharobanki (APT Rs 198185.00 for each works)under Canning-II PS- 1 Construction 2 Nos of Toilet 2 Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. 3 Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)(a) With earth obtained from excavation of foundation. 4 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 5 (I) Cement concrete with graded jhama khoa (30 mm size excluding shuttering)In ground floor(b) 1:3:6 proportion 6 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing andstriking out after completion of works (upto roof of ground floor) (When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht.shall be allowed under 12 (e) for every 4 m or part thereof)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. 7 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 mI. SAIL/ TATA/RINL 8 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety 9 Brick work with 1st class bricks in cement mortar (1:6)(a) In Supur structure 10 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. 11 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (a) With 1:6 cement mortar (i)20 mm thk plaster 12 (ii) 15 mm thick plaster 13 (i) With 1:4 cement mortar(a) 10 mm thick plaster (celing) 14 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. 15 With Sand Cement Mortar (1:4)20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative (i) Wall 16 (ii) Floor 17 Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete. 18 Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mm x 80mm and other 100mm x 100mm both 1.20 mmin each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm)and 2 nos. of 6 mm dia and screws from both sides6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, andhire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt,tower bolt,door ring etc.In ground floor. 19 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost ofprimer. 20 In Ground floor (Two Coat) 21 a) Normal Acrylic Emulsion 22 Colour washing with any shade with Stainers, as required including cleaning and smoothening surface thoroughly : (i) Internal surface (All floors) (b) Two coats (on new works only). (i)Other than yellow, pink. 23 Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) toinside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slabincluding filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.With 250 mm thick dry brick work and 250 mm thick cement brick work (6:1) and 1.00m inside dia. 24 Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding P or S trap (excluding cost of concrete for fixing). 25 (i)580 mm X 440 mm 26 Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i)450 mm X 350 mm 27 Supplying, fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth in all sorts of soil both mixed or unmixed and refilling (but excluding concreting at bottom and sides). (iii)150 mm 28 Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. 29 (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars with/without fixed type ventilators.[The extra rate admissible for the openable portion only] 30 ADD 18% GST 31 Add 1.00% Labour welfare cess

Contract Date: May 27, 2026 Contract Value : ₹ 3.36 Lakh

Local Bodies No of Bidders 4

West Bengal View Result →

47.

Housing Urban and Rular Development #11132405 AOC

Tender For Special Renovation Of Electrical Installation Work At Old Hospital Building (Inside And Outside) Of Mathabhanga Sd Hospital, Mathabhanga In The District Of Coochbehar. - 1 Dismantling the existing electrical appartus like distribution wiring, TL fittings, ceiling fans, power board, DB, LT Panel etc from its position and deposite to the safe place as per direction of EIC. 2 SUB-HEAD 1--Distribution WiringDistribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit FR (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish 3 Average run 8 mtr 4 Average run 10 mtr (For Emergency Light point Only). 5 Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit FR (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire as ECC, to 2 nos 5A 3 pin flush type plug socket & 2 nos Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish 6 Average run 6 mtr 7 Distribution wiring in 1.1 KV single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20/25/32 mm size PVC rigid conduit FR (Precision make) incl. necy. fittings as required 8 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) 9 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) 10 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) 11 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC 12 Supplying and Drawing 1.1 KVsingle core stranded FRPVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 13 4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC 14 Supplying and fixing PVC Rigid Conduit FR [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works 15 25mm size 16 Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes 17 2.5sqmm 18 4 sqmm 19 6 sqmm 20 10 sqmm 21 16 sqmm 22 SUB-HEAD 2-- PLUGS & SOCKETSSupply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required 23 Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand Anchor) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. 24 Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. 25 175 mm x 100 mm x 65 mm 26 200 mm x 150 mm x 65 mm 27 240 mm x 200 mm x 65 mm 28 Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required 29 175 mm x 100 mm x 65 mm 30 200 mm x 150 mm x 65 mm 31 240 mm x 200 mm x 65 mm 32 SUB-HEAD 3--BDB,PDB,VTPN ETCSupplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [Make: L&T/ Legrand /ABB/ SIEMENS/ Schneider] 33 6 way (upto 160A) 34 Supplying and fixing double door Horizontal 6 way TPN MCBDistribution board with IP-42/43 protection, on surface of wall by clamp arrangement & mending good the damages to original finish incl. cable end box and Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment[Make: L&T/ Legrand /ABB/ SIEMENS/ Schneider] 35 6 Way 36 Supplying and fixing double-door SPN MCB Distribution Boardwith IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [Make: L&T/ Legrand /ABB/ SIEMENS/ Schneider] 37 2+10 way 38 Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection [Make: L&T/ Legrand /ABB/ SIEMENS/ Schneider] 39 100 A, FP 40 Supplying and fixing 240/415 V MCCB/MCB Isolator on din rail of existing DBs and necessary connection.[Make: L&T/ Legrand /ABB/ SIEMENS/ Schneider] 41 415V, 63 A FP 42 240V, 32 A DP 43 Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [Make: L&T/ Legrand /ABB/ SIEMENS/ Schneider] 44 63A TP MCB 45 6-32 SP MCB 46 Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment 47 6 way VTPN 48 Supplying and fixing 415V, on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc[Make: L&T/ Legrand /ABB/ SIEMENS/ Schneider/ Havells /HPL /Standard] 49 63A TPN with fuse on L&N 50 100/125A TPN with fuse on L&N 51 SUB-HEAD 4--Supplying & Laying of CableSupply of2/4 Core XLPEInsulated & Sheathed Armoured stranded Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C] 52 4 CORE 50 SQMM (from panel to100AVTPN) 53 4 CORE 70 SQMM (from panel to125A VTPN) 54 4 CORE 120 SQMM (from Gr Floor panel to 1st & 2nd floor Panel) 55 Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire. 56 Up to 50 sqmm 57 From 70sqmm to 150sqmm 58 Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 59 4 CORE 50 SQMM 60 4 CORE 70 SQMM 61 4 CORE 120 SQMM 62 Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 63 4 CORE 50 SQMM 64 4 CORE 70 SQMM 65 4 CORE 120 SQMM 66 Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.(i) With out angle iron support 67 150x50x1.25mm (18SWG) With out angle iron support 68 200x50x1.25mm (18SWG) With 25x25x3mm angle iron support 69 300x50x1.25mm (18SWG) With 25x25x3mm angle iron support 70 Supply & Fixing of perforated GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 71 150x50x1.25mm (18SWG) 72 200x50x1.25mm (18SWG) 73 300x50x1.25mm (18SWG) 74 Supply & Fixing of perforated GI cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 75 150x50x1.25mm (18SWG) 76 200x50x1.25mm (18SWG) 77 300x50x1.25mm (18SWG) 78 Supply & Fixing of perforated GI cable tray cross member with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 79 200x50x1.25mm (18SWG) 80 300x50x1.25mm (18SWG) 81 Supply & Fixing of perforated GI cable tray reducer with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the reducer incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 82 150x50x1.25mm (18SWG) 83 200x50x1.25mm (18SWG) 84 300x50x1.25mm (18SWG) 85 Supply & Delivery of1.1 KV grade, XLPE insulated & Sheathed, multi stranded, armoured, 4 core 240 sq. mm. Al conductorcable. [Make- Havells / Polycab/ Gloster / RR Kabel/RR Kabel] (DG to AMF) 86 Supply and Delivery of 4 feet, 240V, 40 W integrated type single LED tube fittingwith glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Crompton/ Wipro or manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification] 87 Supply and Delivery of 4 feet Industrial box type twin LED tube fitting incl. Supply & Delivery of 2 no. 240V, 20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 105 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Crompton/ Wipro or manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification] 88 Supply & Delivery of 240V recess mounted 2x2 LED downlight having following wattage in white powder coated pressure die cast aluminium housing , with glare free uniform illumination, suitable for 2 x 2 grid ceiling with CCT (5700K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Crompton/ Wipro or manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification] 89 36 Watt 90 Supply & Delivery of 240V surface mounted 2x2 LED downlight having following wattage in white powder coated pressure die cast aluminium housing , with glare free uniform illumination with CCT (5700K-6500K) having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Crompton/ Wipro or manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification] 91 36 Watt 92 SUB-HEAD 6-- FIXING OFLIGHT FITTINGSFixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “U” type MS clamp whose both side fixed on ceiling with sutable size 4 nos. fastener and middle portion connected with the conduit with suitable size of clamping arrangments incl. S&F EI conduit, “U” type (50mmx100mmx50mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. 93 Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener 94 Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. 95 SUB-HEAD 7 -- SUPPLY OFFANSSupply & Delivery of 230V, 1-Ph, AC ceiling fan of follwing size incl. all accessories. (Make- Crompton / Usha / Orient/ Polar) [BEE star rated] 96 Sweep Size- 1200 mm (48), Wattage ≤ 55 Watt, R.PM ≤ 350, Air Delivery ≥ 220 C.M.M 97 Supply & Delivery of 230V, 50Hz, 450 mm sweepheavy duty full metal body wall bracket fan having wattage ≤ 90 Watt, RPM ≤ 1325, Air Displacement (In CFM) ≥ 3550 complete with all accessories. (Make - Orient/Crompton/ EPC/Cinni) [BEE star rated] 98 Supply & Delivery of 220V, Single Phase, 50 Hz A.C heavy duty exhaust fan of following sizes having complete metal body. (Make- EPC/ USHA/Orient CROMTON) [BEE star rated] 99 300 mm (12), 4 Blade, RPM ≤ 920 , Wattage ≤ 45 Watt, Sound level ≤ 46 dB, Air Displacement (In CFM) ≥ 750 100 SUB-HEAD 8-- FIXING OFFANSSupplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40mm x 9mm MS flat including making good damages to building roof with satisfactory finishing and painting - (As per Drawing no. 475 of PWD Specification Book - May 1991) 101 Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. 102 Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. 103 Fixing only cabin fan on wall by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. Length 104 Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 105 30 cm (12) 106 Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 107 30 cm Exhaust fan (12) 108 Supply & Fixing of fan down rod (14 SWG-White MS pipe zins plated) having 19 mm OD 1.8 +/- 0.05 mm thick complete with cutting, making holes for fixing the fan incl. necessary connection wire (2x1.5 sqmm cu wire) as per direction of EIC. 109 SUB-HEAD 9-- Miscellaneous WorkSupply & Fixing240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plateflushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 110 Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixedpaint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paintUpto 9.0 mtr. long pole 111 (i) 1st coat of aluminium paint over 1 coat of RO priming 112 (ii) 2nd coat of aluminium paint over 1st coat 113 SUB-HEAD 10-- EarthingExcavation of soil for installation of Earth Electrode and filling & ramming. (For Soft Soil) 114 Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: 115 By ISI-Medium GI pipe 116 Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required 117 Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. 118 Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe 119 Extra for treatment of soil by using salt & charcoal or coke for plate electrodeRef:- 120 Sub-Head 11- SITC of FDS systemSITC of Intelligent addressable fire alarm system with FACF, detectors, MCP, sounders with all accessories & wires including testing and getting statutory approvals. 121 Sub-Head 12- SITC of LT PanelSupply and installation of L.T. cubical type fully compartmentalized distribution panel board, having rigid and self supporting structure fabricated with 14 SWG CRCA sheet with M.S. angle iron frame (main frame with 50 x 50 x 6 mm angle and each vertical compartment with 40 x 40x6 mm MS angle iron). The base of panel should be made with75mm x 40mm x 4.4 mm M.S. channel. [Manufacturer/Fabricator having Test Certificates from CPRI]. An Auto Cad Drawing of the panel has to approved by EIC before making of panel. 122 Construction Details :All incoming & outgoing switches are to be housed in respective compartments hinged and gasket doors at the front. All doors should have panel locking arrangement in such a fashion that it can not be on unless the feeder remains in off position. The rear panel should gasketed wire net guard for ventilation arrangement will be made of easy accessibility to each compartment by providing rear panel doors with locking system . The panel is to be properly gasketed to prevent the dust & vermin. All vertical bus bar chambers is to properly arrange and all electrical equipments are to be fixed by nuts and bolts on suitable Hylam board / porcelain insulators of adequate size and dimension. The outgoing feeder connection from respective switches are to be made at rear side of panel by means of busbar, copper multi core cables, to be terminated on bolted type terminals for cable connection or on bush insulators for bus bar connection. Each compartment will be providing with DMC/FRP board at back side. 123 Incoming Arrangement :a)415 Volts, 200 A,TPN SFU with proper HRC fuse (open execution type)(Make: L&T/Legrand/Schenider/ABB/Siemens)- 2 No. 124 b) 415 Volts, 200 A, on load front operatedTPN changeover switch (open execution type) (Make: L&T /Legrand/ Schenider /ABB /Siemens)- 1No. 125 Bus bar section :415 V, 315 Amp capacity 99.9% – 99.5% electrolytic tinned 4 bar copper bus barmounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification- 1 set. 126 The busbar is to be rigidly supported on suitable non-hygroscopic insulating materials of robust ration to with stand electromechanical stress in the event of earth fault. All connection to bus to made by suitable nuts & bolts. The busbar is too wrapped with coloured PVC (Red. Yellow, Blue & Black) for colour identifications. 127 Outgoing Arrangement :a) 415V 125 Amps TPN SFU units with HRC fuses(Make:- L&T/SIEMENS/ABB/ SCHNEIDER)in openexecution.---- 2 No. 128 b) 415V 100 Amps TPN SFU units with HRC fuses(Make:- L&T/SIEMENS/ABB/ SCHNEIDER)in openexecution.---- 4 No. 129 c) E.I. Danger Board of suitable size ------- 1 no. 130 Metering Panel:-a) Digital multifunction meter with selector push button switch (up/down) with Voltage, Current, Frequency, Total Harmonic Distortion, PF, KW, KVA, Kwh, KVAh and Preloaded Max & Min Demand with Date & Time Stamping display (Make-Schneider Electric/ Cat No- EM6400NG Class accuracy CIo.5S, POP of Accuracy Class 0.5S or equivalent model of Legrand/ Siemens/ L&T) - 1 No. 131 b) Indicating LED Lamp with colour glasses showing (Red/Yellow/Blue/Amber) (Siemens cat.no 3SB5285-6HC03, 3SB5285-6HD03, 3SB5285-6HF03 or equivalent cat of L&T/ABB/ SCHNEIDER) - 1 No. 132 c) 500/5 Amp ratio C.T (Kappa or equivalent) --- 3 nos. 133 d)S & F 2 Amp SPMCB for auxiliary supply to meters (Make- SIEMENS/L&T/Legrand) - 1 no. 134 Interconnection :-All interconnection between incoming main to Busbar are to be made with suitable size electrolytic tinned copper bars or equivalent flexible pvc insulated multistranded single core Cu cable and the same between busbar to each outgoing mains and & for metering arrangements are to be made by suitable size of Copper with propersocketing of the end of each wire leads. 135 Earthing Arrangement :-A separate continuous aluminum earth busbar of appropriate size is to be painted at the inside bottom of the panel and run across the full load of the panel board. All electrical equipment are to be properly earthed with suitable size G.I. strip. 136 The complete panel board is to be spray painted after required surface treatment by 7 tanks process / sand blasting with 2 coat of red oxide primer & 2 coat of finished paint over dried or powder coating. 137 Installation :-The complete panel board is to be installed on suitable brick padestal as directed by the E.I.C. 138 ADD GST @ 18.00% ON SUM OFAMOUNT Sl-01 to SL-56.16 i.e 18% on Rs. 3067380.00 139 ADD Cess @ 1.00% ON SUM OFAMOUNT Sl-01 to SL 57 i.e @1% on Rs.3619508.00

Contract Date: Oct 14, 2025 Contract Value : ₹ 33.57 Lakh

Government Departments No of Bidders 4

West Bengal View Result →

48.

Housing Urban and Rular Development #11116081 AOC

Tender for Construction Of New School Building For Up Gradation Of Secondary To Higher Secondary School Under Samagra Shiksha, Assam At Uzirar Char High School, Barpeta District (For Supply Of Furniture Only) , Additional Classroom: Desk Cum Bench: Overall Dimension 1800 X 850-900 X 740-750. Desk 1000 X 378 X 750 Mm. Bench 1800 X 335 X 437Mm. The Height/Depth Of The Backrest Should Be 265 Mm. The Desk, Seal & Backrest Should Be Made Of 18 Mm Thick Pre Laminated Mdf Board Isi Marked With Laminate Pasted On Top And Edges With Machine Pressed Pvc Edge Bading Sealed With Hot Melt Eva Glue. The Understructure Should Be Made Of 25.4 X 25.4 X 1.2 Mm Thick 60-70 Micron Epoxy Powder Coated Ms Tubes. Storage Shelf Should Be Made Of 0.6 Mm Thick Powder Coated Affixed Below The Desktop. The Front Side Covered With Modesty Panel Mode Of 1Mm Thick Crca Ms Steel Of Size 1800 X 150 (H) Mm & Edges Sealed With Pvc Bands With Provision Of Two Metal Hooks For Hanging School Bags Fixed At Ends. , Teachers Table: Table Dimension 900X 600 X 740-750Mm With One Drawer. The Table Top Made Of 19Mm Mdf Board Isi Mark With 1Mm Laminate Pasted On Top With Edge Rounded And Machine Pressed & Sealed With 2Mm Pvc Band Sealed With Hot Melt Eva Glue. The Under Structure/Frame Will Be Of Tubular Frame Of Square Tubes Size 25.4 X 25.4 X 1.2Mm Thick Powder Coated With 60-70 Micron. The Shell Of Drawer Is To Be Made Of 0.5Mm Thick Crca Ms With Metal Lock. , Teachers Chair: Chair With Arm Made Of Natural And Biodegradable Material With Seal & Back Made Of Polyurethane Foam Covered With Fabric. The Dimension Of The Chair Shall Not Be Less Than The Following: 1.Overall Height: 850Mm 2.Seating Height:455Mm 3.Width:540Mm.Deoth:500Mm , Science Laboratory: Lab Stool: Stool Made Of Circular Metal Top 1.6-1.8 Mm Thick Cr Steel, 300 Mm Dia Welded To The Under Structure Made Of 4 Ms Tubes Of 22Mm Dia, 1.2Mm Thick Powder Coated Tube. The Seat Will Be Cushioned With Foam Covered With Fabric. Height :460-470Mm. , Teachers Table: Table Dimension 900X 600 X 740-750Mm With One Drawer. The Table Top Made Of 19Mm Mdf Board Isi Mark With 1Mm Laminate Pasted On Top With Edge Rounded And Machine Pressed & Sealed With 2Mm Pvc Band Sealed With Hot Melt Eva Glue. The Under Structure/Frame Will Be Of Tubular Frame Of Square Tubes Size 25.4 X 25.4 X 1.2Mm Thick Powder Coated With 60-70 Micron. The Shell Of Drawer Is To Be Made Of 0.5Mm Thick Crca Ms With Metal Lock. , Teachers Chair: Chair With Arm Made Of Natural And Biodegadable Material With Seat & Back Made Of Polyurethane Foam Covered With Fabric. The Dimension Of The Chair Shall Not Be Less Than The Following: 1. Overall Height : 850Mm 2. Seating Height : 455Mm 3. Width : 540Mm, Death : 500Mm , Computer Room: Standard Computer Chair With Fixed Arms, Revolving With Pedestal Made Of Injection Moulded Nylon Base Of 600Mm Dia Fitted With 5 Twin Wheel Castors And Backrest Made Of Injection Moulded Black Polyproypylene Of Medium Height With Nylon Mesh And The Seat Made From Standard Foam Cover. The Seat Will Have Conventional Pneumatic With One Lever Control For Locking And Height Adjustment Between 400-600 Mm For Static Load Of Not Less Than 100 Kg. , Teachers Table: Table Dimension 900X600x 740-750 Mm With One Drawer. The Table Top Made Of 19Mm Mdf Board Isi Mark With 1Mm Laminate Pasted On Top With Edge Rounded And Machine Pressed & Sealed With 2Mm Pvc Band Sealed With Hot Melt Eva Glue. The Under Structure/ Frame Will Be Of Tubular Frame Of Square Tubes Size 25.4 X 2 5.4 X 1.2 Mm Thick Powder Coated With 60-70 Micron. The Shell Of Drawer Is To Be Made Of 0.5 Mm Thick Crca Ms With Metal Lock. , Teachers Chair: Chair With Arm Made Of Natural And Biodegadable Material With Seat & Back Made Of Polyurethane Foam Covered With Fabric. The Dimension Of The Chair Shall Not Be Less Than The Following: 1. Overall Height : 850Mm 2. Seating Height : 455Mm 3. Width : 540Mm, Death : 500Mm , Library Room: Reading Table: Dimension: 1800 X 900 X 740-750. The Table Top Made Of 25 Mm Thick Pre Laminated Mdf Boards Isi Marked With Laminate Pasted On Top With Edges And Machine Pressed 2Mm Pvc Edge Banding Sealed With Hot Meld Eva Glue.The Understructure Should Be Made Of 1.6Mm Thick Ms Frame Supportinh The Top.The Legs Should Be Made Of Ms Erw Tube Of Dia 38.1Mm & 1.6Mm Thick. , Reading Chair: Dimension: 450 X 500 X 800 Mm (Approx.). Multipurpose Chair Of Engineered & Contoured Pvc Seat & Back Rest Fixed On Understructure Of Ms Pipes Of Dia 19Mm Duly Powder Coated With 60-70 Micron Epoxy. Width Of Seat & Back Rest 400-500 Mm With Suitable Heigth For Seating. , Teachers Table: Table Dimension 900X 600 X 740-750Mm With One Drawer. The Table Top Made Of 19Mm Mdf Board Isi Mark With 1Mm Laminate Pasted On Top With Edge Rounded And Machine Pressed & Sealed With 2Mm Pvc Band Sealed With Hot Melt Eva Glue. The Under Structure/Frame Will Be Of Tubular Frame Of Square Tubes Size 25.4 X 25.4 X 1.2Mm Thick Powder Coated With 60-70 Micron. The Shell Of Drawer Is To Be Made Of 0.5Mm Thick Crca Ms With Metal Lock. , Teachers Chair: Chair With Arm Made Of Natural And Biodegadable Material With Seat & Back Made Of Polyurethane Foam Covered With Fabric. The Dimension Of The Chair Shall Not Be Less Than The Following: 1. Overall Height : 850Mm 2. Seating Height : 455Mm 3. Width : 540Mm, Death : 500Mm , Storage For Books For Library: The Size Of The Product Is 914Mm W X 320Mm D X 1742Mm H. The Top Panel, Back Panel And Side Panel Are Made Of 0.7Mm High Yield Strength Crca Rest In 0.8Mm Crca. Each Door Has 6 Lever Camm Lock With Common Key And 3Mm Thick Transparemt Glass For Clear Inside Vision Secured In A Metal Frame Through Rudder Gasket The Finish Of The Product Is Epoxy Polyester Powder Coated To The Thickness Off 50 Microns. , Almirah Of Dimension 1981H X 916W X 486D With 4 Nos Of Adjustable Shelves Made Of Crca Steel With 3 Way Locking Mechanism With Shooting Bolt Arrangement Storwel Plain Comes With 4 Plain Adjustable Shelf Of Thickness =0.8 Mm. Net Weight (W/O Carton) = 73.5Kg. 2) Top, Bottom, Lh & Rh Side And Back Material Thickness =0.9 Mm Removable Rh & Lh Main Door With Stiffeners Material Thickness =0.9Mm.

Contract Date: May 26, 2026 Contract Value : ₹ 31.09 Lakh

Government Departments No of Bidders 3

Assam View Result →

49.

Tourism #11114098 AOC

Contract Date: Jul 02, 2026 Contract Value : ₹ 3.70 Crore

Government Departments No of Bidders 2

Goa View Result →

50.

Public Administrative Department #11109429 AOC

Contract Date: May 19, 2026 Contract Value : ₹ 27.25 Lakh

Local Bodies No of Bidders 7

Maharashtra View Result →

TenderDetail

Loading tenders