View Bid Results For Travel Agent Tenders

We found 31 Bid Results related to travel agent tenders. You can find Contractor details who won travel agent tenders along with contract details in Bid awards announcements section.

Filters
Stage
21
7
3
Tender Publishing Platform
6
25
State / UT
13
6
5
4
2
2
2
2
2
2
1
1
1
1
Contract Value
14
3
2
12
Publish Date
0
0
0
0
0
Sector
12
7
6
3
3
3
2
2
1
1
1
1
1
Ownership
4
9
9
7
6
Within keyword
Active filters:
Showing 1–1 of 31 tenders matching your filters
1.
Health and Family Welfare #10433257 Price Bid
Supply Of Machine, Equipment And Others , List Of Machine And Equipments , Laproscopic Hd Camera Brand - Karl Storz/Conmed/Olympus Technical Specification Resolution: 1920X1200 Pixes / 1900X1000 Pixes Cable Length: 300 Cm , Ultrasonic Harmonic Scalpel Brand - Johnson Technical Specification Dimensions: (Hxwxd) 5.3 14.5X15.2 Voltage: 100-240 Vac Frequency: 50/60 Hz Rated Current: 3 Amp , Ultrasonic Harmonic Scalpel Brand - Valley Lab Technical Specification Macrobipolar/Bipolar: 473 Khz Sinusoid, 100% Duty Cycle. Seal: 473 Khz Sinusoid Pulsed , Hand Instruments For Laproscopy Brand- Karl Storz/ Olympus Technical Specification I) Veress Needle: It Should Be With Spring Action Blunt Style -12 Cm: 1 No 10 Cm: 1 No 8 Cm: 1 No Ii) Trocar And Cannula:10 Mm: 2 Nos 7 Mm: 1 No. 5 Mm 6 Nos It Should Consists Of Trocar, Cannula With Insufflation And Multifunctional Valve And Must Have Pyramidal Tip. Iii) Reducer/Reduction Sleeve 5 Mm. 1 No Iv) Telescopes: 10 Mm- 0°- 1 Nos -30? - 1 Nos5 Mm-30? 1 Nos Rigid Rod Lens System Provides Good Resolution And The Better Dept Perception. It Should Have Uniform Image Brightness And Autoclavable. The 300 Forward Oblique Angle And Permits For Greater Latitude For Viewing Underlying Areas Under Difficult Anatomical Conditions. V) Suction Cannula: 10 Mm - 1 No 5 Mm -1 Nos Vi) Laparoscopic Scissors: Curved (Monopolar Metzenbaum Dissector 5Mm Diameter): 1 Nos Straight (Bipolar):1 Nosperitoneal Scissor: 1 Nosvii) Unipolar Forceps (Hook & Spatula): 2 Nos Viii) Bipolar Forceps : 2 Nos Ix) Atraumatic Forceps: Maryland Dissector Forceps: : 2 Nos. Fenestrated Forceps: : 2 Nos. X) Needle Holder (Flat Jaw) With Handle : 2Nos Xi) Monopolar Cable (Reusable):1 Nos. Xii) Bipolar Cable (Reusable): 1 Nos Xiii) Allis (Double Row Of Teeth) Grasper: 1 Nosxiv) Aspiration Needle: 1 Nos. Xv) Reducer/ Reduction Sleeve (5Mm): 1 Nos Xvi) Grasping Forceps (Toothed & Rachet 5Mm): 2 Nos Xvii) Laparoscopic Knot Pusher: 1 Nos Xviii) Clip Applicator (Reusable): 5Mm -: 1 Nos : 10 Mm: Ino Xix) Uterine Manipulator: 1 Nos Xx) Clips( Medium & Large) Xxi) Drilling Needle:1 Nos Xxii) Infiltration Needle: 1 Nos Xxiii) Biopsy Forceps (Toothed Punch Biopsy): 1 Nos Xxiv) Myoma Fixation Screw: 2 Nos Xxv) Tissue Morcellator With Base Unit & Accessories: 1 Nos , Dual Wavelenght Laser Brand- Zeiss Technical Specification Laser Type: Diode, Semiconductor Wavelength : 1470Nm+635Nm Max Power: 15 Watts/1470Nm+5Mv/635 Aiming Beam : 635Nm/1, 4Mw Max Or 515Nm/2, 5Mw Max Operation Mode : Continuous Or Modulated Pulsed Time : 0.05Ms-1000Ms Beam Delivery : Sma905 Connector Optic Fiber Compatible : Optic Fibers Having A Core From 200Um To 1000Um, Na=0.22~0.48 Beam Emission Initiation : Footswitch Controller :Microprocessor Display : 10.1 Ips With Touch Panel Medical Approved Cooling :Internal, Air And Thermoelectric Cooling Power Supply Of The Laser: Dc 24V/8.33A From The Separate Ac Power Supply Of Ac Adapter : Single Phase 100-240Va; 50-60Hz, Max 90W Ac Adapterdc 24V/8.33A Medical Approved Laser Dimensions: 27Cm*24,5Cm X 9Cm Laser Weight: 2.75Kg Laser Case Dimensions : 53Cm X 38Cm X 23Cm Weight Of Laser With Cases : 9Kg Environmental Conditions During Work : From +10 To 24°C Degree, Relative Humidity From 30% Up To 60% Cass Of Medical Deviceiib Laser Safety Class 4 Electric Safety Class I Type B Housing Protection Degree Ip20b , Hd Camera Set Brand- Karl Storz/ Olympus Technical Specification (I) Hopkinsa® Forward-Oblique Telescope 30A, Diameter 4 Mm, Length 30 Cm, A Utoclavable, Fiber Optic Light Transmission Incorporated, Color Code Ed :1 Nos (Ii) Telecam C3 : 1 Nos (Iii) Image1 St™ Hx One-Chip Full Hd Camera Head, 50/60 Hz, Fixed Focus, Prog Ressive Scan, Soakable, Gas-And Plasmasterilizable, Focal Length F = 16 Mm, 2 Freely Programmable Camera Head Buttons, For Use With Image1 X-Link Tc301, Tele Pack + And Tp101 : 1 Nos (Iv) Medical Grade Surgical Monitor - Fhd : 1Nos (V) Cold Light Fountain Power Led 175 Scb, With Integrated Karl Storz-Scb, High-Performance Led And One Karl Storz Light Outlet, Power Supply 11-240 Vac, 50/60 Hz Including: 400 A Mains Cord 20090170 Scb Connecti G Cable : 1Nos (Vi) Fiber Optic Light Cable, With Straight Connector, Extremely Heat-Resi Stant, With Safety Lock, Diameter 4. 8 Mm, Length 250 Cm :1 Nos , T U R P Set Brand-Olympus Technical Specification (1) Cystoscope-Urethroscope Sheath, 22 Fr :1 Nos (2) Telescope Bridge, With 1 Lockable Channel, For Use With Cystoscope Sheaths : 1Nos (3) Working Element, E 1 Working Element (Also For Use With Optical Urethrotome) 2 Cutting Loops2 Coagulat Ng Electrodes 2 High Frequency Cords 1 Protection Tube . The Thumb Support Is Movable. In Rest Position Th Electrode Is Inside The Sheath.:1 Nos (4) Resectoscope Sheath, 26 Fr, 1 Nos (5) Schmiedt Visual Obturator, : 1 Nos (6) Cutting Loop Angled, 24/26 Fr., Units Of 6 : 1Nos Ellik Evacuator:1 Nos (7)Urethrotome Sheath, 21 Fr. Urethrotome Sheath And 2 Luer-Lock Cones.:1 Nos (8) Obturator, For Urethrotome Sheath, 21 Fr.1 Nos Sachse Cold Knife, Straight, Not To Be Used With Hf Current This Artic Le Is Only Available In Units Of 6 :1 Nos , Flexible Cystoscope Brand-Olympus Technical Specification Cysto-Urethro-Fiberscope, With Contrapositive Deflection Mechanism, De Flection Of Distal Tip 210°/140, Direction Of View 0°, Angle Of View 10, Working Channel Inner Diameter 7 Fr., Sheath Size 15.5 Fr., Worki G Length 37 ??, Consisting Of: 11272 Cu1 Cystourethro-Fiberscope 2767 A Case 27023 Fe Grasping Forceps 27023 Ze Biopsy Forceps 13242 Xl Lea Age Tester 11025 E Pressure Compensation Cap 27651 B Cleaning Brush 27 14 Y Lueradaptor , Echocardiography Brand-Ge Healthcare/ Philips / Siemens Healthcare/Bpl Technical Specification A) 2D, M-Mode, Colour M-Mode B) Colour Flow Doppler Imaging C) Fully Steerable Pulsed Doppler D) Fully Steerabie Continuous Wave Recall E) Digital Cine Replay Of All Imaging And Doppler Modalities. F) On Screen Cine Storage & Image Recall G) Digital Image Storage And Patient Archive With True Scanner Frame Rates. H) Full Measurement And Analysis Capabilities. Both On Line And Offline Preferable. I) Imaging Frequencies From 1 Mhz To 15 Mhz J) Review Of Stored Ultrasound Images. K) User Adjustable B Colorization Maps, Gain Settings, Colour Doppler Baseline, Angle Correction And Other Important Parameters With Live/Frozen/Archived Images/Loops. , 12 Lead Ecg Machine (Brand - Bpl/Maestros) Technical Specification Electrocardiograph Should Have Capability Of Recording 12-Lead Ecg And Should Have The Following Features: 1. Should Have Simultaneous Acquisition Of 12 Leads 2. Should Have A Display To Preview The Ecg Waveform Before Printing 3. Should Have 7 Inch Or More Display With High Resolution Screen 4. Should Be Compact, Portable And Easy To Operate 5. Should Have Keyboard For Manual Entry Of Patient Data 6. Should Have Provision For Providing Hospital Name On The Printed Record7. Should Work On Li-Ion Battery8. Should Have A Frequency Response Of 0.01-300 Hz 9. Should Have Sampling Frequency Of 15,000 Hz Or More10. The Device Should Weigh Less Than 5.5 Kgs With Battery11. Should Have A Special Arrhythmia Triggered Mode Of Printing12. Should Have Pacemaker Detection Facility 13. Should Be Able To Record On Different Modes Of Sensitivity: 2.5,5,10,20 Mm/Mv & Agc14. Should Have Different Recording Speeds: 5, 10, 12.5, 25 And 50 Mm/Sec15. Should Have Different Filters Available For Smoothing Of Waveform16. Should Have Ac Filter, Emg Filter: 25 Or 35 Or 45 Hz Or Off17. Should Have Anti-Drift Filter18. Should Have Different Print Formats: 3/6/12, 3X4 With Rhythm Leads, 6X2, 12X119. Should Have A Large Storage Of 700 Ecgs Or More20. In Case Of Error In Lead Connections, The Machine Should Display The Change In Color Of Particular Lead.21. Should Be Able Transfer Data Directly In Pdf Format To Usb22. Should Be Able To Printout Records On Thermal Paper As Well Z-Fold23. Should Have Facility Of Printing In Automatic/ Manual/ Rhythm/ R-R Mode Of Printing24. Should Have Facility For Interpretations And Measurements25. Should Provide Detailed Printout Of Patient Data26. Should Have Paper Of Minimum Width Of 210Mm27. Should Have The Capability To Generate Any Number Of Ecg Copies For Distribution28. Should Be Able To Connect To Pc 29. Should Be Able To Operate To A Maximum Of 4 Hours On A Newly Charged Battery30. Should Have Direct External Printer Connectivity31. The Unit Should Be Portable And Should Be Able To Carry With Help Of A Handle.32. The Product Should Be Ce Certified33. The Manufacturer Should Be Iso Certified34. The Device Should Be Provided With Standard Accessories:A) Ecg Cable (Adult)-1 Nob) Gel Bottle- 1 Noc) Chest Electrodes (Set Of 6)- 1 Nod) Limb Electrodes (Set Of 4)- 1 Noe) Z-Fold Paper - 1 Packf) User Manual-1 No , Multipara Patient Monitor(Brand - Drager/Penlon/ Bpl) Technical Specifications For Multipara Monitor 1. Multiparameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,(Massimo),Nibp (Suntech) Temperature.3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have12-Inchcolor Lcd Display.5. Should Have Dual Modes Of Operation: Rotary Knob.6. Should Display 7 Waveforms Or More7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen.8. Ecg: Should Be Able To Monitor Ecg Through 5-Lead Patient Cab Should Have Manual St Analysis Window ,Should Detect 20 Arrhythmias And Generate Alarms. , The Priority Of Arrhythmia Alarms Can Be Configurable, Should Measure Pvc &Pac Should Be Able To Monitor Heart Rate From 10-300 Bpm Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etcshould Have Pacemaker Detection Facility Respiration: Measurement Range Of 0 To 150 Breaths Per Minshould Have Gain Selection: ×0.25, ×1, ×2, ×4 Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S Should Have Apnea Detection Facility Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10 Spo2: Should Have Massimo Technologyshould Have Measurement Range Of 0~100 % Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: Must Be Of Suntech Medicaltechnology For Clinical-Grade Blood Pressure Measurement Have Auto, Manual, And Stat Modes Of Operation For Nibp. Should Have A Measuring Range Of 0-280 Mmhg Should Have 2 Channels For Temperature Monitoring Should Have Data Storage Capabilities:72 Hours Of Trend Data Storage. , Bp Machine Brand - Pagoda/ Omron/ Platinium/ Dr Trust/Bpl Technical Specification Should Be Able To Measure Blood Pressure And Pulse Rate In Adult As Well As Pediatric Patients. Should Be Based On Oscillometric Measurement Technology, Using Dynamic Linear Deflation Method. Should Have Backlight Lcd Display With Easy To View Readings In Dim Light. Pressuremeasurement Range Should Be 60 To 250Mm Hg Systolic, And 40 To 200Mm Hg Diastolic. Pressure Display Accuracy Of +/- 3 To 5 Mm Hg Pulse Rate Measurement Range Of 40 To 200 Per Minute Pulse Measurement Accuracy Of Within 5% Should Include Ac Adapter (Input Range 100-240V And Output Voltage Dc 6V), Preferably With Rechargeable Battery (3.6V To 4.8V, 1900 To 2400Mah) Cuff (22 To 32 Cm Size) Should Be Supplied With Standard Adult Size Single Button Operation For Start And Stop Functions With Auto-Inflation Of Blood Pressure Cuff. , Ventilator Brand - Drager/Bpl/Medisys Technical Specification 1. The Ventilator Should Be High-Endventilator Suitable For Ventilating To Adult And Pediatric Application. Should Have Advanced Microprocessor Control System With Individual Selection Of Various Ventilation Parameters. 2. The Unit Should Be With Altitude Compensation For Volume And Btps Correction For Monitoring3. The Unit Should Be Of Wall Independent Gas Delivery System. Demonstration Of The Equipment Is A Must Demonstration Of The Equipment Is A Must4. Should Have Facility For Invasive And Non-Invasive Ventilation;5. The Ventilator Should Have 12” Or More Lcd Screen With Touch Facility For Display Of Waveforms. Should Have Brightness Modes Like Day/Night-Mode. The Real Time Display Of All Parameters/Waveforms Should Be Clearly Visible From All Angles6. Should Have Modes Of Ventilation Equipped With Newer Modes Of Ventilation:A) Assist/ Controlb) Volume Control Modes: Vcv, Vc-Simv, Plvc) Pressure Control Modes: Pcv, Pc-Simv, Bi-Level, Bilevel-St, Pc-Aprvd) Spontaneous Ventilation Modes: Psv, Cpap, Bilevel /Similar, Bilevel St / Similare) Prvc/Pcv-Vg/Dynamic Bilevel/Or Its Equivalent Modef) Closed Looplung Protective Mode- Asv/Nava/Wobov/Alpv/Smart Care (At Least 1 Of The Mentioned Mode Is Mandatory)G) Should Have Pav (Proportional Assist Ventilation) / Pps (Proportional Pressure Support)/ Paps (Proportional Adaptive Pressure Support)H) Cpr (Resuscitation Mode),I)Niv In All Pressure Modes7. Hfot /Nasal Cpap Breathing Therapy Should Be Capable Of Adjusting The Range Up To 60Lpm8 A) Apnea Backup Ventilation In All Modes8 B) It Should Have Weaning Analyzer Tools : Sat & Sbt9. Should Have In-Built Nebulizer With Capability To Deliver Fine Particle Size Of To Be Used In Line10. Should Have Facility To Measure And Display The Following Parameters:A) Airway Pressure (Peak & Mean)B) Tidal Volume (Inspired & Expired)C) Minute Volume (Expired)D) Spontaneous Minute Volumee) Total Frequencyf) Fio2 Dynamicg) Intrinsic Peep, V Trap & Time Constant (Rcexp)H) Resistance & Compliance11. Automatic Compliance And Leakage Compensation For Circuit And Et Tube 12. Should Have Facility Of Logbook, For Events And Alarms With Date & Time 13. Should Have Following Setting & Monitored Parametersa) Tidal Volume; Pre-Set Range For Both Pediatric & Adult Modes To Be Providedb) Inspiratory Pressure (Up To 100Cm Of H2o);C) Respiratory Rate 1 To120 Bpm;D) Apnea Back Up Rate;E) Peep: 0-50 Cmh2of) Inspiratory Flow: 0-120 Lpmg) Max Peak Flow : 280 Lpm Or Betterh) O2 Concentration: 21-100%I) Pressure Support: 1-(100-Peep) Cmh20j) Fio2 Setting Range Between 21% And 100%;K) Pressure Flow & Volume Curves;L) Loop For V-Flow, Flow-P, Flow-Paw And At Least 5 Storage Spaces For Reference Loopsm) I: E Ratio: 150:1 To 1: 299N) Ramp Time: Up To 3 Seco) Inspiratory Time: 0.2 To 15Sp) Pause Time; Exp/Insp Holdq) Pressure Trigger: Up To -10Cmh2o And Flow Trigger Up To 20 Lpm;R) I Flow/T Plateaus) Resistance & Compliance (Cdyn & Cstat)T) Leakageu) P Plateau 14. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw15. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw16. Facility To Calculate Lower And Upper Inflection Point (P/V Flex Points)Should Have Recruitment Manoeuvre17. Should Have Automatic Suction Routine & O2 Flush18. Should Have A Dedicated Bronchoscopy Function To Allow & Compensate Ventilation While Performing Bronchoscopy19. Should Have Trend Of 7 Days And Above With Facility To Transfer Through Usb Interface20. Alarms Should Be User Friendly, Audio And Visual With Text Message, System Alarm Should Be For:A) Pressure Changes (High/Low)B) Tidal Volume Changesc) Minute Volume Changesd) High Peepe) High/Low O2 Concentrationf) Power Failure And Low Batteryg) Patient Disconnectionh) Apnea 21 A) The Ventilator Should Have Facility For Co2 Monitoring. Should Have Inbuild Etco2 Interface & Software To Accommodate External Optional Volumetric Etco2 In Future21 B) Should Be Upgradable To :Metabolic Monitoring (Indirect Calorimetry).Price To Be Quoted As Optional.22. The Ventilator Should Not Weigh More Than 12 Kgs 23. Ventilator Should Have In Built Non- Consumable Paramagnetic Oxygen Sensor That Shouldnot Require Change For At Least 5 Years.24. Flow Sensor Should Be Differential Pressure Technology, Or Ultrasonic.Flow Sensor Must Be At Expiratory End. Should Be Maintenance Free, Reusable And Autoclavable.The Flow Sensor, Inspiratory Port, Expiratory Port Should Be Easily Removable Without Using Any Tools & Should Be Autoclavable.25. Should Have Usb /Serial Interface For Communications With Networked Devices26. The Ventilator Should Have On Screen Help Menu For Alarm, Ventilation Mode & Ventilator Settings. The On Screen Help Menu Should Guide User On Solving The Alarms; Providing Information On Ventilation Modes & Settings. 27. Should Support Dual Limb Circuits Of Any Make And Not Ventilator Model Specific Circuits28. The System Should Have Inbuilt Rechargeable Battery With Backup With Minimum 2 Hours29. Power And Gas Requirements: A) Power Input To Be 220-240Vac, 50Hz (100-240 Vac) B) Gas Input (Air And Oxygen) - 29-100 Psi (29-87 Psi)30. The Ventilator Should Be European Ce Certified Or Us Fda Approved, And The Manufacturing Company Should Be Iso Certified.Accessories/Consumables To Be Supplied With Main Unit I. Icu Ventilator With Trolley – 1Nosii. Reusable Adultcircuit - 1 Nos Iii. Hinged Support Arm – 1 Nosiv. Hme Filters—5Nosv. Bacterial Filters-5Nos Vi. Hepa Filetr-1Nos Vii. Test Lung -1Nos Viii. High Pressure Oxygen Inlet Hose – 1Nos , Projector With Screen Brand - Epson / Benq / Lg Cinebeam Technical Specification Ce Marked, Power Supply: 220-240 V Ac, 50/60 Hz, Transparent Lcd Panel Display System, Minimum 5200 Hours Lamp Life, Min. 5800 Lumens Brightness, Contrast Ration 10000: 1, Aspect Ratio 16: 10, Resolution Xga (1024 X 786) With Hdmi And Vga In, Lan & Usb Support, Wireless Support, Light Weight, Remote Control Etc. , Phaco Emulsifier Machine Brand-Alcon Legion / Zeiss Technical Specification 1. Operating Frequency Should Be Approx. 40 Khz 2. Handpiece: Ultralight Ultrasound 4 Crystal Piezoelectric Hand Piece. 3. Us Modes: Continuous, Pulse, Single Burst, Multi Burst, Continuous Burst, Automated Programmable Modulation (Apm) 4. Automated Ultrasound Power On Demand: Ultrasound Management Technology That Automatically (De)Activates Ultrasound Us Delivered Only When Needed Ept Up To 50% Less & Better Followability. 5. Type Of Infusion: Iop Controlled, Synchronized Fluid Exchange System That Directly Measures And Simultaneously Controls Both Infusion And Aspiration Volumes In Real-Time. It Actively Compensates For Incision Leakage. Quattro Controlled Forced Infusion. 6. Display: 24 Inches Touch Screen. 7. Iop Range: 30-120 Mmhg 8. Vacuum Range 0 To 700 Mmhg 9. Aspiration Flow Rate 0 To 120 Cc/Min 10. Aspiration Control Modes: Vacuum Controlled Mode, Flow Control Mode 11. Chamber Stability: Irrespective Of Type Of Cataract, Surgical Conditions, Leakage (0 -12 Ml/Min) It Keep Chamber Stable & Maintain Targeted Iop Throughout Procedure. 12. Iop Recovery Time After Occlusion Break 200-250Ms For Vacuum In Range Of 200 -600Mmhg. 13. U/S Tips: Coaxial Phaco With Incision Size 2.2 Mm 14. Vitrectomy: Pneumatic Cutting Device15. Type Of Vitrectomy Cutter: 23G Anterior Vitrectomy Cutter16. Anterior Vitrectomy Range:Cut Rate 30 To 5000 Cuts Per Minute. 17. Actuation Medium For Vitrectomy: Compressed Air From Internal Source 18. Diathermy: Bipolar With Fixed And Linear Control Via Foot Pedal. 19. Type Of Diathermy Handpiece: Diathermy Forceps And Diathermy Pencil Eraser. 20. Instrument Tray Arm Length: Should Be 800Mm Or More. 21. Dual Linear Footswitch 22. Should Be Usfda And Ce Approved 23. Online Ups Should Be Providedaccessories: Phaco Hand Piece(Coaxial) -2 Coaxial Handpiece Tip I – 2 I/A Bi Manual Hand Piece – 2Phaco Tip (2.2 Mm)- 10 Phaco Sleeve (Silicone)(2.2Mm) – 10 Test Charnber- 10 Tubing And Cassettes (Disposable) – 100 Diathermy Cable With Forceps – 2 Phaco Wrench-2 Vit Cutter- 23 G; Single Use – 6Sterilization Container/ Tray , Autorefractometer & Keratometer (Ark) Brand-Zeiss- Visuref 150 Technical Specification (A)Device Data.(A) Refraction(1) Sphere -25.00D To +22.00D (In Steps Of 0.12D/0.25D)(Ii) Axix 0 To 180*) (B) Keratometer(A) Corneal Curvature 5.00 To 10.20Mm (In Steps Of 0.01Mm)(B)Corneal Redraction-33.000 ?? 67.50D (In Steps Of 0.12D/0.25D)(C) Corneal Astigment-0.00D To-15.00D50d (In Steps Of 0.12D/0.25D)(D)Axis 0 To 180* (In Seps Of 1*) (E) Corneal Diameter (2.00 To 1200Mm (In Steps Of 0.10Mm) , Humphrey Fied Analyzer ( Hfa3) Brand-Zeiss Technical Specification • High Quality Goldman Standard Automated Full Field Perimetry Of International Standard With Bowl Size Radius = 30Cm. • Computer & Monitor Should Be Integrated In The Perimeter (No External Computer). • Stimulus Size I, Ii, Iii, Iv & V.• Background Illumination 31.5Asb.• Maximum Temporal Range 80Deg.Suitable For Central 30, Neurological Tests As Well As Full Field Testing. • Central Field Test Patterns 30-2, 24-2,10-2, Macula.• Peripheral Field Test Pattern 60-4, Nasal Step, Custom Test. • Threshold Test Strategies Full Threshold, Sita Standard, Sita Fast , Full Threshold, Fast Pack, Sita - Swap.• Screening Field Test P-60, Ff-80, Ff-120, Ff-240,Nasal Step For Periphery .• Screening Test Strategies Two Zone, Three Zone And Quantify Defects.• Glaucoma Hemi Field Test, Heijl –Krakau Blind Spot Monitor• Video Eye Monitoring, Gaze Tracking Monitoring System, .. Vertex Monitoring And Head Tracking. • Touch Screen On Crt Monitor, Keyboard & Provision Of External Monitor & Keyboard.•Internal Hard Disk Drive.• Stimulation Duration 200Ms, Wavelength Broad Band Visible Light• Stimulus/Background Colour White On White.• Swap (Blue On Yellow) Perimetery. • Auto Pupil Measurement. • Kinetic Testing & Custom Kinatic Testing. • Motorised Chinrest, Motorised Table, Laser Jet Printer • Glaucoma Progression Analysis ( Gpa ) Software For Monitoring Disease Progression. With Visit Wise Graph &Visual Field Index (Vfi).• Releye Monitor.• Forum Software For Archiving & Offline Analysis Of Patient Data & Gpa Analysis Etc.• Hfa Dicom Gateway. , Laser Dcr Brand-Medfin Technical Specification Applicationsdacryocystorhinostomy Amplifying Medium Diode Ergonomics Tabletop Wavelength-980Nm Average Power -8W Weight -1.2Kg (2.65Lb) , Automatic Tourniquet System With Hose Cuffs Brand - Zimmer Biomet (Model Ats-5000) Number Of Ports Dual Port Number Of Potential Cuffs Dual Cuff Dual Cuff Mounting Options Table Or Pole Mount Table Or Pole Mount Battery Type And Life Lithium Ion 6 Hrs Lithium Ion 6 Hrs User Interface Touchscreen Touchscreen International Alarm Standard 60601-1-8 Compliant Compliant Display 10.1” Color 7.0 Color Minimum/Maximum Pressure 20/600 Mmhg 50/600 Mmhg Pressure Accuracy ±3 Mmhg (20–600 Mmhg) ±4 Mmhg (50-600 Mmhg) Limb Occlusion Pressure (Lop) Allows For Patient Specific Pressure, Which Allows For The Minimum Pressureto Be Used.Yes Noline Occlusion Detection (Acoustic Reflectometry)A Kinked Pneumatic Tube Can Prevent An Inflated Cuff From Deflating, Resulting In Unintentional Tourniquet Pressure. This Alarm Alerts Or Staff That There Is An Occlusion In The Line To The Cuff.Yes , Battery Opreated Heavy Duty Drill & Saw Brand -Manman/Biotech Specifications--- Drill And Reamer Hand Piece Attachments, Oscillating/S Reciprocating Saw Hand Piece Charger And Sterilization Handpiece For Drilling & Reamingtrigger Type Single Modes Available - Reverse & Forward Modedrill Speed 1000 Rpm Approxdrill Torque 4 Nm (35+ In Lbs)Ream Torque 16.5 Nm (145+ In. Lbs)Weight Of Hp With Batteries 1250 Gms Drilling And Reaming Attachments Hudson/Zimmer/Trinkle Reamer Attachment - Yesao Reamer Attachment - Yesao Type Drill Attachment With Quick Coupling - Yesjacobs Chuck With Minimum 6 Mm - Yeskeyless Chuck -Yes Wire Driver Attachment - Yespin Driver Attachment - Yes Dhs Reamer Attachment With Quick Coupling - Yesoscillating/Sagital Saw Hand Pieceergonomic Pistol Grip Design For Maximum Comfort And Control Yes Weight Of Hp With Batteries.- 1350 Gmssaw Speed - 15000+ Cpmcutting Arc - Between 4 To 5 Degreenoise Level - 60-85 Dblspecial Blades Each For Tkr And Thr (Nos) - 10 Battery Specifications Type Of Battery Lithium Ion (Li-Ion) Number Of Batteries 2 , Electric Cautery Machine Brand - Shalya/Enertech/Eclipse/Valley Lab 1) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology 2) Unit Should Have No Of Bipolar Modes Available 3) Unit Should Have Pure Sinusoidal Output Waveform In Hf Power Output In Cut And Bipolar Modes. 4) Type Of Display Should Be Lcd Touch Screen 5) It Should Adjust Power Level Automatically Depending On Tissue Type. 6) It Should Have Two Monopolar Output Channels. 7) Bipolar Current Meter Bipolar Current Meter 8) Unit Should Deliver Two Coagulation Output At A Time With Independent Control Over Each Output For On & Off. 9) Both Channels Should Work By Foot And Hand Control. 10) It Should Complete Self Testing During Power On. 11) Power Efficiency 98 Or More Than 98 12) Availability Of Advance Cutting Modes For Regular Open Surgery 13) It Should Accept Disposable And As Well As Reusable Patient Plate. 14) Unit Should Have Tissue Feedback, Pulsed Interval-Controlled Pulse Cut Function. 15) It Should Accept Dual Area And Single Area Patient Return Electrode. Should Give Green Indication If Dual Area Patient Plate Applied To Patient & Red Indication With Alarm Tone If The Patient Plate Is Not Applied. 16) Bipolar Should Work Without Patient Plate Or Patient Plate Error Condition. 17)Bipolar Should Have Auto Facility To Start & Stop Working Without Footswitch. 18) Unit Should Have Adjustable Delay Activation In Auto-Bipolar. 19)It Should Have Randomized Spray Coagulation For Larger Area Coverage.20)It Should Be Upgradeable For Argon Delivery Module From The Same Oem.21) Unit Should Be Useful For Underwater Procedures. 22) It Should Have Alarm Facility After Completion Of Bipolar Coagulation. 23) Unit Should Have Time Out Function For Automatic Stop The Hf Output If Prolong Unintended Activation. (Optional)24) Unit Should Have Touch Key Pad For Power And Mode Selection.25) System Should Give Error For Faulty Handswitch Of Footswitch In Monopolar & Bipolar.26) Unit Should Give Error For Faulty Keypad. 27) It Should Have No Of Segments Of Display 3. 28) Unit Should Operate From 180 V To 265 V Without Using External Stabilizer. 29) It Should Have Independent Foot Switch For Monopolar Two Paddle. 30) It Should Have Independent Foot Switch For Bipolar Single Paddle. 31) Unit Should Have Facility To Connect Either Monopolar & Bipolar Footswitch.32) Unit Should Have Remote Power Setting Facility From Sterile Field With Conventional Hand Switching Pencil. 33) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. 34)Manufacturer Iso 9001: 2008 & En Iso 13485:2012 Certified Company.35) Warranty Must Be 3 Years Or Higher 36) It Should Be Supplied With Following Reusable And Autoclavable Accessories: -1. Patient Return Electrode …………………….1 No.2. Hand Switching Pencil………………………. 1 No.3. Foot Switching Pencil…………………………1 No.4. Bipolar Forceps …………………………………1 No.5. Cable For Bipolar Forceps……………………1 No.6. Monopolar Footswitch ………………………1 No.7. Bipolar Footswitch ……………………………1 No. 8. Universal Adaptor …………………………….1 No.Set Of Electrode (Angled, Ball And Needle).1No10. Trolley With Lockable Castor Wheel Should Be Supplied1. Unit Should Be Eu Ce (4 Digit Notified Body Certified)2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode 3. Availability Of Test Report From Central Govt/ Nabl/Ilac Accredited Lab Covering All Parameters. And Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. , Arthroscopy Set (Brand- Smith +Nephew / Karl Storz) Arthroscopy Set 30° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscope. Light Guide Insertion On Definitione Direction View With A J-Lock Fixation For Cannula.Working Length Of Not More Than 160Mm Optimal Centre-To-Edge Resolution For Enhanced Picture Quality Angle Of View: 30 Degree Diameter: 4Mm Arthroscopies Should Be Supplied With Compatible Cannulas High Flow, Double Valve, Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator, Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopy Set 70° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscopic Light Guide Insertion On Opposite Side Of The Direction Of View With A J-Lock Fixation For Cannula. Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator. Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopic Power Shaver System: Input Voltage Of 100 To 240V, 50/60 Hz Power Consumption Not More Than 350Va. Two Separate Receptacles For Motor Drive And Powered Instrumentation. Shaver Should Have 2 Modes Of Oscillation For Aggressive Cutting Shaver Should Have Button For Flush Lavage Of Joints On Footswitch. Autoclavable Ultra-Light Hand Piece With Suction Facility, With 3 Hand Control Buttons And Replaceable Cable Long 10Ft (3 M). Maximum Torque Should Not Be Less Than 32Oz.In And Weight Should Not Be More Than 212 Gms Pedal Style Footswitch With 3 Operating Modes I.E. Forward, Reverse And Oscillation. On-Line Lcd Display For Speed And Direction Referral. Should Communicate With The Fluid Management System Once Connected With The Cable. Camera Control Unit: System Must Have Inbuilt 4K Uhd Camera Console, Led Light Source & Wifi Enabled Image Management System With Recording Via Usb Port Along With Recording In App Through In Built Wifi. Camera Resolution Must Be 3840*2160 (Native) 4K Camera Head: Camera Head Should Have 4K, 3 Chip Mos Video Sensor Technologymust Have Transport Shock And Vibration Compliance With Ista 3Avideo Field Rate 60 Hz Must Have C-Mount Autoclavable Coupler With 19.5 Mm Coupler Length Opt For 4Mm Scopes Must Have Digital Zoom Video Data Transmission High-Speed, Low-Voltage Differential Serial (Lvds), Digital Transmission Via 12-Foot Camera Cablevideo Output Format Full Uhd 2160P, 100% Compatible With Smpte St-425-5 When Used With The Ccu Altitude: 3000 Meters Maximum 4K Monitor: Monitor Should Have Resolution 4096 * 2160 Pixels Monitor Should Support Picture Size (Diagonal) 789.06 Mm (31 1/8 Inches) 1387.8 Mm (54 3/4 Inches) Monitor Should Support Effective Picture Size 698 * 368.1 Mm (27 1/2 * 14 1/2 Inches)Monitor Should Support Pixel Pitch 0.1704 X 0.1704 Mm Monitor Should Have Aspect Ratio Of 17:09Monitor Should Have Pixel Efficiency Of 0.9999 Size Is -125Mb 1300 Seconds Video / Gigabyte Storage 10000 Images/Gigabyte Storage Airprintt Is Required. , Fess Instruments Set Nus Surgery Fess & Dcr Surgery Instruments Brand -Kalelkar / Besco Blakesley Forceps 0 Blakesley Forceps 45Blakesley Forceps 90° Thrucut Forceps 0Thrucut Forceps 45° Thrucut Forceps 90 Maxillary Sinus Forceps 30, 90, 120Hewiser Forceps Tubular Rotatable Kerrison Punch Straight Kerrison Punch Curved Backbiting Forcep Tubular Rotatable Stammberger Ostrum Punch (Mushroom Forceps)Giraffe Forceps Upturned 55, 70, 90, 110 With Vertical Or Horizontal Opening Fronntal Sinus Bougie Set Of 4Sickle Knife Sharp/Blunt Ball Probe Double Ended Right Angledball Probe With J Hook Double Endedantrum Curette Oval Or Round Cup Suction Canulla 45 Or 90° , Micro Ear Surgery Instrument Set (Ear Surgery Instruments) (Stapedectomy Instruments) Brand -Kalelkar / Besco Technical Specification Sickle Knife , Circular Knife Flag Knife , Sickle And Flag Knife Double Ended , Sickle And Circular Knife Double Ended Circular And Flag Knife Double Ended , House Curette Double Ended, Elevator Pick Straight/Curved/Right Angled , Fisch Perforator 0.3 Mm To 0.8 Mm. Hand Burr , Piston Depth Guage , Stapedectomy Instruments , Piston Cutting Jig Piston Autoclaving Box , Teflon Pistonspistion Crimper Micro Ear Scissor Belluchi Operative Ear Speculam Set Of 4 Black Slotted Or Plain Endural Retractor 2X2endural Retractor Left/Right Plester Micro Suction Canulla 116 To 24Gmicro Suction Canulla Adaptor Silicone Suction Tubecartilage Slicer , Tonsillectomy Instruments Set Brand -Kalelkar / Besco Technical Specification Davis Boyles Mouthgag With 5 Blades Davis Boyles Mouthgag With 5 Slotteddraffin Bipod Stand With Plate Tonsil Holding Forceps Tonsil Dissector Cum Pillar Retractortonsil Dissection Forceps Tonsil Artery Forceps Straighttonsil Artery Forceps Curvedtonsil Artery Forecps Negustonsil Scissor Tonsil Snare Tonsil Snare Wire +Quincy Foreps +Adenoid Curette With Cage + Adenoid Currette Without Cage + Younker Suction Canulla +B.P.Handle No 7 + Negus Knot Tier +Thrroat Instruments Tracheatomy Surgery Instruments + Tracheatomy Tube Chevalier Jackson/Fuller + Mosquito Artery Forceps + B.P.Handle No 3 + B.P. Blade No 11 + Fine Scissor 4 +Tracheal Dilating Forceps + Kilner Catpaw Retractor +Skin Hook + Single Hook Retractor +Double Hook Retractor , Nasal Surgery Instruments Set (Septoplasty Instruments) Brand -Kalelkar / Besco Technical Specificationkillians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Specularm Set Of 4 B.P. Handle No 3+Freersdouble Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator Symes Double +Suction Elevator + Lucs Forceps Round Or Heart Shape + Jensen Middleton Septum Cutting Forceps + Jensen Middleton Septum Punch Forceps + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or. Plain + Hammer (Mallet) + Submucosal Diathermy+ Needle/Ball Probe + Nasal Packing Forceps + Spring Scissor + Catspaw Retractor + Tongue Depressor + Rhinoplasty Surgery Instruments + Raps + Cricoid Hook + Jenkins Chisel + Alar Retractor + Aufritch Nasal Retractor + Ash Septum Forceps + Walsham Septum Forceps + Gillies Osteotome + Nasal Packing Forceps + Silver Nasal Chisel With Guard Left/Right + Skin Hook + Cottle Retractor + S.M.R Instruments + Killians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Speculam Set Of 4 + Freers Double Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator + Suction Elevator + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or Plain + Hammer (Mallet) , Micro Laryngeal Surgery Instruments Set Brand -Kalelkar / Besco Laryngoscope Mls Black Finish Adult/Child/Paediatric With Fiber Optic Carrier Chest Supportlaryngoscope Distending Operating Type Laryngoscope For Filling With Endoscopemls Forceps Cup Type Straight/Left/Right/Upward/Downward Mls Forceps Serrated Type Straight/Left/Right/Upward/Downwardmls Scissor Straight/Left/Right/Upward/Downward Mls Vocal Cord Spreader Mls Mini Larygeal Forceps Triangular End Mld Needle Holdermls Ssickle Knife Mls Circular Knifemls Flag Knifemls Probe 45°, 90°Mls Curettemls Handle For Use With Straight Instumentssuction Tube With Thumb Control Insulated Probe For Coagulationbronchoscope/Esophagoscope & Instrumentsbronchoscope Negue Type Any Size With Fiber Optic Carrier Esophagoscope Any Size With Fiber Carrierhypopharyngoscope (Esophageal Speculam) With Fiber Optic Carrier Forceps Alligator Grasping Single Actionforceps Peanut Soft Tissue Single Actionforceps Cub Biopsy Type Single Action Forceps Patterson Type Single Actionforceps Universal Biopsy & Grasping Single Actionforceps Alligator Grasping Double Actionforceps Peanut Soft Tissue Double Actionforceps Cup Biopsy Type Double Actionforceps Patterson Type Double Actionforceps Universal Biopsy &Ngrasping Double Action Suction Tube Rigid With Thumb Conntrol , Mastoid Surgery Instruments Set Brand -Kalelkar / Besco B.P. Handle No 4 Kilner Catspaw Retractormollison Mastoid Retractor 3X3 Mollison Mastoid Retractor 4X4mahadevaiah Modified Mastoid Retractor Left/Right Jensen Retractorjolls Retractor Periosteal Elevatoroperative Ear Speculam Set Of 4 Black Slotted Or Plain Micro Suction Canulla 11G To 24Gmicro Suction Canulla Adaptor Mastoid Suctioncanulla Set Of 4 With Thumb Grip Sickle Knifecircular Knifeflag Knife House Curette Double Ended Elevator Adsons Toothed Forceps Adsons Non Toothed Forceps Needle Holder 6 Fine Scissor 4Micro Ear Crocodile Serrated Forceps Micro Ear Crocodile Cup Forceps Micro Ear Crocodile Scissors Malleus Nipper Ball Probe 45 Degree/90 Deegre Vien Graft Pressossicle Holding Forceps , Fiberoptic Flexible Video Laryngoscopy System Brand -(Penlon / Karl Storz) Specification 1) It Should Be Very Portable And Light Weight Device With Minimum Display Size Should Be 4 Inch With High Resolution Anti Reflective Display. 2) Should Have 180 Degree Horizontal Screen Rotation With Vertical Movement For Betterclinical Assistance. 3) It Should Be A Lithium Ion Rechargeable Battery-Operated Device With Low Battery Indicator. 4) Minimum Operation Item Should Be 130 Mins. 5) It Should Have Led Light Source At The Tip Of The Blade With Minimum 2 Megapixel Cmos Camera For Better View. 6) It Should Have Channelled And Without Channelled Blade Option. 7) Should Have 4Gb Inbuilt Memory For Continuous Recording & Image Capturing. 8) Blades Sizes Should Be Size 1,2, 3, 4,5 . 9) Blade Should Be Affordable, Sterile Which Connect Laryngoscope Handle With Lock. 10) Battery Life Cycle Should Be Minimum 300 Times. 11) It Should Have Iso & Conformity To Ce. , Fiber-Optic Video Bronchoscope(Brand - Karl Storz /Olympus ) Specification Fiber-Optic Video Bronchoscope Required With Video Illumination To Visualize And Document The Operational Area On Screen. It Should Consist Of Following Features: Monitorscreen 8 To 12 Inch In Size For Display With Touch Screen To Control Features With Hdmi Output For Connecting To A Big Screen Which Can Display Picture Simultaneously On Both Screens.Monitor Should Have Two Ports To Connect Two Video Endoscopes At One Time And Pictures Can Be Swapped Using Touch Screen. Monitor Should Be Chargeable, To Be Supplied With Charger And Should Have Facility To Be Used While Charging. Monitor Resolution Should Be Minimum 1920 X 1200 Pixels In 16:9 Format.Integrated Recording Of Video & Still Images Should Be Possible On Data Card Or Usb Drive With Jpeg And Mpeg Format Which Can Be Easily Transferred To The Computer/Laptop. Documented Videos & Still Images Should Be Easily Recalled On The Monitor. Monitor Should Have A Facility To Connect Flexible Scope Directly Without Any Special Coupler Or Accessory. Monitor Should Have Picture-In-Picture & Side-By-Side Mode To View Images From Flexible Video Scopes. Monitor Should Be Splash Proof According To Ip 54 And Should Be Shock Resistant.Monitor Should Have Lithium-Ion Rechargeable Batteries And Run For At Least 100 Mins. When Fully Charged. Soft Bag From Same Manufacturer Should Be Supplied To Place The Monitor And System Can Also Be Operated Without Taking Monitor Out From The Bag. Same Monitor Should Be Compatible With All The Below Mentioned Scopes Of Same Manufacturing Principal Company .Reusable Fiber Optic Video Bronchoscope.Single Use Flexible Intubation Video Endoscope A Fiber Optic Bronchoscope Is A Medical Device Used To Visualize The Airways During Bronchoscopy, A Procedure Where A Thin, Lighted Tube Is Inserted Into The Lungs To Examine Them. The Specifications Of A Fiber Optic Bronchoscope Typically Include Its Outer Diameter, Working Length, Field Of View, Angulation Capabilities, And The Diameter Of Its Working Channel. Key Specifications:Diameter: Bronchoscopes Come In Various Sizes, With Outer Diameters Ranging From 2.5 To 10 Mm. Smaller Diameters (E.G., 4.9 Mm) Are Suitable For Smaller Patients, While Larger Diameters May Offer Better Image Quality And Suction Capabilities. King Length: The Working Length, Which Is The Distance From The Distal End Of The Bronchoscope To The Insertion Point, Typically Ranges From 30 Cm To 60 Cm. View: This Refers To The Angle Of Vision That The Bronchoscope Offers. A Wider Field Of View (E.G., 110-120 Degrees) Allows For A Broader View Of The Airways. Angulation: The Ability To Bend The Tip Of The Bronchoscope Allows For Maneuvering Into Various Airways. Up And Down Angulation Capabilities Are Typically Around 180 Degrees And 130 Degrees Respectively King Channel Diameter: The Working Channel Is The Passage Through Which Instruments Like Forceps For Biopsies Or Suction Devices Can Be Passed. It Is Typically 1.2-2.3 Mm In Diameter Other Notable Specifications: 26/25 All Above Equipment Should Be From Same Manufacturers And Usfda & Ce Approved , Anaesthesia Workstation Complete With Anaesthesia Gas Delivery System, Vaporiser, Circle Absorber System With Built In Anaesthesia Ventilator & Withmultipara Monitor Brand - -Drager/Penlon/Bpl General • Should Have Provision For Delivery Of Oxygen, Nitrous Oxide And Medical Air • The Machine Should Be Capable Of Delivering Low Flow Anaesthesia. • The Anaesthesia Machine With Circle Absorber, Ventilator And Vaporiser Should Be From Same Manufactureranaesthesia Machine Should Be Ce Notified Body Approved. • Anaesthesia Machine Should Be Cdsco Approved. Vaporizer Should Be Us Fda Approved.Should Have Independent Attachments For Connecting Central Gas Supply And Pin Indexed Cylindershould Have Non-Interchangeable Pipeline Hose Inlet Connection To Pipelines For Medical Oxygen, Nitrous Oxide, And Medical Air Should Have Large Size Pressure Gauges, For Easy Visibility, Colour Coded, Two Each For Oxygen And Nitrous Oxide; One For Airanaesthesia Machine Frame Shall Be Manufactured In Strong But Lightweight Material.The Machine Shall Have A Maximum Of Four Castors/Wheels For Manoeuvrability With Front Two Castors Having Brakesshould Have Minimum Two Non-Lockable And Spacious Drawers For Storing Accessoriesthe Frame Shall Have Gcx Compatible Channels Incorporated For Mounting Other Accessories. • The Option For An Integrated Independent Oxygen Flow Meter For Oxygen Delivery Is Mandatory. Frame Shall Accommodate Up To Two Backup Cylinders One Each For Oxygen And Nitrous Oxideon Activation Of The System On/Off Switch Gas Flow And Vaporization Shall Immediately Be Availableshould Have Selector Switch For Selecting Open And Close Circuit Operation • The Common Gas Outlet Shall Be Mounted At The Front Of The Machine (Not Rear Or Side) To Be Easily Accessible In The Event Of An Emergency And For Use Of Alternate Breathing Circuits • The Option For Illumination Of The Writing Table/Work Surface Is Mandatory • The Frame Should Have Integrated Power Outlets To Supply A Minimum Of Three External Devices • Should Have Top Shelf, Manoeuvring Handle And Footrest • Machine Should Have Table Topwork Space To Keep Drugs. • The Unit Should Have A Battery Back-Up Facility For The Ventilator In The Event Of Power Loss. Minimum 90 Minutes Battery Backup Required. • Input Power :100 – 240 Vac Gas Flow • Antistatic And Cascaded Dual Flow Tubes Should Be Available For All Gases (O2, N2o& Air) To Allow Suitable Resolution And Accurate Control At Low Total Fresh Gas Flows. • The Flow Range Shall Be 150Ml-10 Lpm • Should Have N2o Cut Off Facility If O2 Supply Fails. • Should Have Oxygen Failure Alarm Both Visual And Audible. • Should Have Oxygen Flush Facility Bypassing Vaporiser. O2 Flush Switch Should Be Conveniently Placed For Easy Accessibility. O2 Flush Switch Should Be Non-Lockable. • The Unit Shall Have A Mechanical Anti-Hypoxic Device (Ahd) System To Control The Ratio Of Oxygen And Nitrous Oxide. A Completely Mechanical Ahd System, That Requires No Electricity, Is Mandatory • The Mechanical Ahd System Must Limit Minimum Oxygen Levels To Approximately 25% • Should Have Minimum Mandatory Oxygen Flow Of 100 Ml When Switched On • It Shall Be Possible To Deliver Air With Only Basal Flow Oxygen Independent Of The Abovementioned Hypoxic Control. • Gas Flow Shall Be Controlled Mechanically Only • Visual Display Of Individual Gas Flows Is Mandatory, This Shall Be By Physical Means Such As Glass Flowmeters Independent Ofelectrical Power • Flow Meters Should Have The Option Of Backlight Illumination • In The Event Of Complete Power Loss And Battery Failure It Shall Still Be Possible To Set The Fresh Gas Flow Accurately For Each Gas, Manually Ventilate (With Bag) And Continue To Keep The Patient Anaesthetized. • Anaesthesia Machine, Vaporizer And Ventilator Should Be From Same Oem. • Provide Isoflurane And Sevoflurane Vaporizer With Themachine. Vaporizers • The Unit Should Accommodate At Least Two Vaporizers For Anaesthetic Agent Delivery. • The Manifold Should Only Accept Vaporizers With Approved Back Bar Connections And Prevent Usage Of More Than One Vaporizer Simultaneously. Preferably Selectatec Compatible Back Bar. • Vaporizers Supplied With The Unit Shall Be Routine Maintenance Free For The Life Of The Product • Vaporizers Supplied With The Unit Shall Be Manufactured From Lightweight Materials To Aid In Fitting & Removal • Should Have An Operating Flow Range Of0.2 – 15 L/Min And Nominal Capacity 250 Ml Ventilator • Ventilator Shall Cater For A Diverse Range Of Patient Groups From Neonates To Adult Patients With Restrictive Airways • Ventilator Should Be Pneumatically Driven And Controlled Electronically • Ventilator Shall Have A Large 8.4” Colourtft Display, For Exclusive Use Of Ventilator Control And Monitoring. • Control Ofthe Ventilator User Interface Shall Be By Touch Screen And Rotary Dialventilator Shall Have The Following Ventilation Abilities, Volume Control (Vcv), Pressure Control Ventilation (Pcv), Simv-V And Simv-P ,Spont/Pressure Support Ventilation (Psv),Manuaassisted Modes Of Breathing Shall Be Flow Triggered. Ventilator Shall Compensate For Fresh Gas Flow And Compliance Of The Entire Circuit. Should Have User Adjustable Alarms For Major Parameters Such As Tidal Volume, Minute Volume,Fio2,Airway Pressure, Frequency Apnea Alarms Must Be User Adjustableto Allow For All Operating Conditions And Phases During Anaesthesia Ventilator Should Have The Ability To Display Patient Spirometry Loop Ventilator Should Also Display Waveforms For Flow, Volume And Airway Pressure Stem Absorber & Not Remoted Via Tubes Or Channelsvolume Measurement Sensors Should Not Be Disposable Typeventilator Parameterstidal Volume- 10Ml-1600 Mlfrequency- 4-100 Bpm I:E Ratio- 4:1 To 1:10 Inspiratory Pause - 0-60% Of Ti Peep - Off, 3-30 Cmh2o Pressure Limit - 5-70 Cmh2o Minute Volume-0.5 To 60 Lpm Breathing System • The Breathing System Designed So That It Can Be Removed & Replaced As A Complete Unit Without The Use Of Tools • All Parts Of The Breathing System That Are In Contact With Patient Gas Shall Be Latex Free And Autoclavable Except For Non Autoclavableremovable Part Like O2 Sensor And Pressure Manometer. • Bag/Vent Switch Shall Be Integrated On The Absorber And Should Activate Ventilator In Vent Mode And Vice Versa (One Step Operation). • Breathing System Should Have Heater System To Avoid Water Condensation. • Should Have Quick Release Canister For Sodalime , Capacity Minimum 1.5 Litre • The Breathing System Absorber Canisters Shall Have A Bypass System To Allow For Canister Change Mid-Case Without Loss Of Ventilation Pressure. The Requirement For An Automatic Bypass Without Extra Input From The User Is Mandatory • The Ventilator Bellows Shall Be Clearly Visible And Be Of Upright Design.The Bellows Should Ascend On Expiration To Provide A Quick Visual Indicator For Assisted Breathing, Spontaneous Breathing And System Leaks. • Same Bellows Shall Be Used For Adult And Pediatric Application • Should Have Provision For Fio2 Monitoring Cell And Fio2 Value Should Be Monitored On The Main Screen. • A Bag Arm With Positional Adjustment Shalmulti Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Massimo),Nibp (Suntech) Temperature,Dual Ibp, Agm ( Massimo) Mainstream. 3. Should Have 12-Inch Color Lcd Display. 4. Should Have Dual Modes Of Operation: Rotary Knob. 5. Should Display 7 Waveforms Or More 6. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 7. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 8. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 9. Spo2: ? Should Have Massimo Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 10. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 11. Should Have 2 Channels For Temperature Monitoring 12. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. O 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 13. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 14. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. 19.Monitor Should Be Able To Directly Connect With Hospital Information System (His 20.Should Have Standby And Night Mode 21.Should Have Li-Ion Battery 22.Battery Should Have 3.5 Hrs Of Operation 23.Monitor Should Be Ce Certified 24.Manufacturer Should Be Iso Certified 13485:2016 , Bi-Phasic Defibrillator Brand - Bpl/Maestros Technical Specifications For Bi-Phasic Defibrillator • The Machine Should Have Facility For Ecg Monitoring, Bi-Phasic Defibrillation,With Facility To Print Ecg Through In-Built Thermal Printer,• Should Be Extremely Light-Weight (Less Than 10 Kgs) • Should Have Monitoring Facility Through Color Tft Display With Screen Size At Least 7” Or Better. • Should Have Both Synchronous And Asynchronous Mode. • The Defibrillator Should Be Biphasic Technology Based Having Energy Selection Of 2-300 Joules• It Must Be Capable Of Monitoring Ecg Through Ecg Cables, Multi-Function Electrodes And External Paddles. • The Machine Should Be Able To Defibrillate Adult, Paediatric Patients. • The Machine Should Have Ecg Wave Form Display On Bright Screen Along With Other Vital Numeric Information. • Should Be Able To Monitor Ecg• Should Have Facility For Auto Testing When Switched On And During Operations. • The Machine Should Be Compact, Portable With Built In Rechargeable Battery. • Should Have External Pacemaker With Fixed Or Demand Mode. • Should Be Able To Deliver A Maximum Of 300J In Aed Mode • Should Have A Minimum 2 Hours Battery Capacity For Monitoring And 1 Hour Battery Capacity For Giving Minimum Of 100 Shocks.• Energy Selectiononfront Panel Button And External Paddle Buttons • Charge Control On Front Panel Button And External Paddle Buttons • Charge Indicator Charging Tone, End Of Charge Tone, Led In Charge• Shock Control Buttons On The External Paddles • Should Have External Defibrillator Adult And Paediatric Paddles.• Charging Time - Less Than 8 Seconds At 300 J With A New And Fully Charged Battery • The Machine Should Have User Selectable Alarm Settings• The Machine Should Store At Least 24 Events For Viewing Or Recording.Ecg: • Should Be Able To Monitor Ecg Through 5-Lead Patient Cable • Should Be Able To Display Lead I,Ii,Iii, Avr, Avl, Avf And One Of The Chest Leads• Should Be Able To Monitor Heart Rate From 15-300 Bpmgeneral Specifications• The Machine Should Work On Mains As Well As Rechargeable Battery. • The Device Should Be Manufactured From An Iso Certified Organization• Machine Should Be Supplied With Standard Accessories• System Should Be Easy To Operate With Facility To Give Print Command, Charge And Energy Selection On Both External Paddles And On The Main Unit.• Should Have Upgradable Facility For Masimo Etco2.• Should Have Upgradable Facility For Spo2.• Should Have Upgradable Facility For Nibp.• Should Have Upgradable Facility For Pacer Also. , Multi Para Monitor With P, Nibp, Ecg Facility (Brand - Bpl/Maestros/Drager)) Technical Specifications For Multipara Monitor 1. Multi Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Oxyset+), Nibp (Suntech) Temperature. 3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have 12-Inch Color Lcd Display. 5. Should Have Dual Modes Of Operation: Rotary Knob. 6. Should Display 7 Waveforms Or More 7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 8. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 9. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10. Spo2: ? Should Have Nellcor Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 12. Should Have 2 Channels For Temperature Monitoring 13. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 14. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 15. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. , Fully Functional Automatic Dental Chair With Inbuilt Suction And Compressor (Brand- Confident / Chamundi) Programmable Dental Chair, Unit Fitted With Floor Mount Light With Led(Faro, Maia) Operating Light Having, On/Off And Intensity Control By Non-Touchsensor Monitor Mounting Arm High And Low Vacum Motorized Crs Suction System Autocalvable 2 Nos Beecool Ii Light Cure Cordless-1 No Modular Trolley System Over The Patient Airotor Points- 2 Nos Supreme Micromotor 35,000Rpm With Digital Display Of Speed Three Way Syringe- 1 Nos Supreme Optic Scaler With Five Scaling Tips With Endo Chuck 1 No Ss Instrument Tray X-Ray Viewer Multi Function Foot Control Comfort Dental Operators Stool Compressor Monobloc Oil-Free Medical Grade Airotor Air Compressor 1.5/2 Hp With Radiator Cooler, Condensor, Silicon Column Filter For Moisture, Dust Filter Microbial Filter Fitted On Ms Tank. , Dental Aerotor(Brand - Nsk) Push Button With Led Light , Dental Micromotor Contrangle(Brand - Nsk) Latch Type , Dental Micromotor Straight With Led Light (Brand - Nsk) , Round, Straight Surgical Bur For Straight Hand Piece Micromotor Carbide Burs(Brand - Nsk/Prima) , Round, Straight, Inverted Cone And Tapered Fissure Burs For Aerotor Diamond Fg (Brand- Dent Ark) , Rotary Files Niti Files Sx, S1 S2 F1 F2 And F3 (Brand- Dent Ark /Nsk) , Ultraound Color Doppler System (Brand -Samsung Hs30/ Ge Logiq / Mindray Mx7 (3D,4D)/Bpl) Technicalspecification 1. The Units Should Be Latest State Of The Art Digital Color Doppler With Broadband Beam Forming For Cardiac, Abdominal,Vascular And Ob/Gynapplication. The Models With Following (Or Higher) Specifications Need To Be Quoted. 2. The Machines Should Be Usa Fda And European Ce Certified And Should Be Latest In Technology And Launched In 2016 Or Later. The Manufacturing Company Should Be Iso Certified. 3. They Should Have At Least 750000 Digital Processing Channels For High –Resolution Imaging. 4. Imaging Modes : 2D, M- Mode, Color Flow Imaging, Pulse Doppler, Power Doppler, Continuous Wave Doppler And Directional Color Flow Mapping, 3D/4D Imaging Modes 5. The Machine Should Be Supplied With Dedicated 3D/4D Package 6. The Machines Should Have Facility For Simultaneous Dual/ Duplex/ Triplex Mode Display 7. Tissue Harmonic Imaging Should Be Available On All The Transducers. 9. Machines Should Be Capable Of Advanced Real Time Compound Imaging. 10. Should Have Frame Rate 1500 Fps Or More 11. Scanning Depth Should Be 40 Cms Or More 12. High Dynamic Range Of 250 Db Or More. 13. The Machines Should Have 256 Grey Shades (8 Bit) Or More. 14. One Touch Image Optimization Should Be Available In 2D Mode With One Button Automatic Adjustment Of Tgc And Receiver Gain And Compression Curve Based On The Range Of Detectable Tissue Signals. 15. There Should Be One Button Automatic Adjustment Of Doppler Prf, Baseline, Dynamic Range And Gain In Doppler Mode. 16. Pulsed Wave Doppler Should Be Available On All Imaging Transducers With Adjustable Sample Volume Size, Simultaneous Or Duplex Mode Of Operation, Simultaneous, 2D, Colour Doppler, Pulsed Doppler, High Prf Capability In All Modes Including Duplex And Triplex And Automatic Adjustment Of Scale And Baseline. The System Should Have Option To Adjust The Color Flow Mode For High Or Low Flows In One Touch. 17. Machines Should Support Broad Band/ Wide Band High Density Probes Spanning With Frequency Range From 1-20 Mhz (+/- 1 Mhz). The System Should Support Latest Technology Single Crystal Probe Or Matrix Array Probes For Better Resolution And Penetration. 18. Automatic Doppler Analysis Should Be Available With Automatic Real Time Calculation Of At Least Sixof Following User Selectable Parameters Peak Systolic Velocity End Diastolic Velocity, Mean Diastolic Velocity, Volume Flow, Time Average Mean Velocity, Time Average Peak Velocity, Resistive Index, Pulsatility Index, Systolic/ Diastolic Ratio, Acceleration/ Deceleration Times. 19. The Machine Should Have Up To 500000 Images Storing Facility And Cine Loop Review Facility With Memory Up To Minimum Of 25,000 Frames 20. The Machines Should Have Facility Of Direct Storage And Retrieval Of B/W And Color Images (Both Frozen And Cine Loop) In The Inbuilt Hard Disk Drive. In Built Hard Disk Storage Should Be Equal To Or More Than 1Tband Solid State Device In Addition With Capacity 120Gb. 21. The Machines Should Support Four Or More Transducers With Universal Ports Allowing Any Transducer To Be Connected To Any Port. 22. Machines Should Have A High Resolution Fully Articulating Non-Interlaced Flicker Free, Anti-Glare Led Display Of 21 Inches Or More With Resolution 1,920X 1,080 Or Better.In Addition, The Machine Should Have 10” Or More Touch Control Panel For Easy Access. 23. The System Should Have Image Enhancement Options Like Speckle Reduction, Spatial Compounding And Filtered Tissue Harmonics. The System Should Have Adaptive Blending Color To Maintain The 2D Resolution While Working In Color Mode. 24. Zoom Facility (Upto 8 Times Or More Magnification) With High Resolution Results And Pan Capacity In Both Real Time And Frozen Images. 25. The System Should Have Cd-Dvd And Usb Archival (Dicom And Pc Format).There Should Be 4 Or More Usb Ports. 26. Machine Should Be Offered With The Following Broadband Probes (I) Cardiac Package Along With Adult Phased Array Transducer With Frequency Ranging 1.0 - 5.0Mhz (+/- 1.0Mhz). (Ii) Convex Transducer Frequency Ranging ( C1-6Ct) Mhz. (Iii) Liner Transducer Frequency Ranging (L3-12T ) Mhz (Iv) Tvs Transducer Frequency Ranging (Ec3-10T) 27. Online 1Kva Upsand Color Inkjet Printer 28. Preference Would Be Given To Products Manufactured In India, Japan, Korea, Europe, Us. , Laproscopic Surgery Set With Hysteroscope And Resectoscope (Brand Ethicon/ Mindray Medical Pvt Ltd/ Karl Storz/ Conmed/Olympus) Unit And Camera Head The System Should Have The Full Hd Resolution-1920 X1080 Internal Medical Grade Recorder For Capturing Full Hd Videos And Full Hd Stills With Storage Capability Internal Of 50 Gb Or External Medical Grade Recorder Should Be Provided From The Same Manufacturer. System Should Have The Facility Of Controlling The Recording Device From The Camera Head. Video Scopes Can Be Connected To The Same. The Camera System Should Be Able To Provide With 1080 P Lines For Hd Resolution Image. Technical Specifications: Image Sensor: 1 Xcmos Agc: Microprocessor Controller Weight: 130Gm Focal Length: 16Mm Control Buttons: 3 (2 Of Them Freely Programmable) Input: Keyboard Input For Character Generator. Power Supply:-100-240 Vac 50/60 Hz Certified To: Iec 601-1, 601-2-18, Csa 22.2 No. 601, Ul 2601 And Ce According To Mdd, Protection Class1/Cf 2 High-Definition Medical Grade Monitor Led Crystal Display. Max. Resolution Of 1920X1080. Screen Diagonal - 27Inches Desk Top With Pedestal. Should Have The Facility Of Pip Mode. Accessories External 24Vdc Power Supply, Mains Cord, Pedestal. Certified To: En 60601-1, Protection Class Ipx 1 Led Light Source With Fiber Optic Cable Color Temperatures 6400K External Light Source Light Outlets - 1 Light Intensity Adjustment: - Continuously Adjustable Manually From Light So Should Be Supplied With Light Cable, Diameter 4.8Mm, Length 250Cm. Certified To :- Iec 601-1 & Ul 544 Ce According To Mdd, Protection Class 1/C Telescopes Forward Oblique 30 Degree Telescope, Diameter 10 Mm, Autoclavable, Length Optic Light Transmission Incorporated. Forward Oblique 30 Degree Telescope, Diameter 5 Mm, Autoclavable, Length 2 Optic Light Transmission Incorporated Co2 Insufflator Technical Specifications: Gas Flow: 0-400 L/Min Cv 625 Laprascopy Set Pressure: 0-30 Mmhg (4000Pa). High Flow Mode (0 To 40 L/Min.) Sensitive Mode Pressure 15 Mm Hg & Flow 15 L/Min For Sensitive Application Electronic Control And Colour Touch Screen, Following Data Are Displayed On Touch Screen: -Insufflation Mode. Set Value Pressure (0-30 Mmhg). Current Patient Pressure. Set Value Gas Flow (0-40 L/Min). Current Gas Flow. Gas Consumption (0-999 1). Reusable Insufflation Tube For Co2 Gas Up To Patient Body. High Flow Mode With Flow Performance Up To 40 L/Min. Easy And Intuitive Use With User Friendly Color Touch Screen 7 Inch For Easy And Precise Setting Of Set Values For Pressure And Flow And Of Insufflation Mode, As Well As For Clear Display Of Corresponding Set Values And Actual Values. Optical And Acoustic Alarm Signals In The Event Of Patient Overpressure Should Have Hose Pipe. Equipment Cart From The Same Manufacture Should Be Quoted With 4 Or More Helves Isolation Transformer Co2 Cylinder Holder Laparoscopic Instruments- Detailed Description • Veress Pneumoperitoneum Needle With Spring Blunt Stylet, Luer-Lock, Length 13 Cm & 15 Cm –2 Nos • Trocar, Size 11 Mm, Color Code: Green, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel, With Washers Pack Of 10 – 4 Nos • Trocar, Size 6 Mm, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel With Washers Pack Of 10 – 4 Nos • Reduction Sleeve, 11/5 Mm – 1 Nos • Reducer 11/5 Mm– 1 Nos • Telescope, Diameter 10 Mm, Length 32 Cm, Autoclavable, Variable Direction Of View From 0°-90, Adjustment Knob For Selecting The Desired Direction Of View, Fiber Optic Light Transmission Incorporated- 1 Nos •Injection Needle, Luer-Lock, Diameter 1. 2 Mm, Size 5 Mm, Length 36 Cm - 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 3 6 Cm, Right Angled, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert, And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Long, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting- And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Alligator Jaws, Double Action Jaws, Consisting Of: Plastic Handle Without Ratchet, With Larger Contacact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Siz E 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Long, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, 2 X 4 Teeth, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle With Manhes Style With Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Bowel Grasper, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube, Insulated., Three Parts Dismantle 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Cleaning, Single Action Jaws, Atraumatic, Fenestrated, Curved, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet Metal Outer Sheath, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Plece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Heavy, Double Action Jaws, Consisting Of: Plastic Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel – 1 Nos • Three Plece Scissor, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Deaning, Double Action Jaws, Curved, Length Of Blades 15 Mm, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Insulated, Without Ratchet Metal Outer Sheath, Insulated Scissors Insert For Use With Trocars Size 6 Mm Three Part Dismantel 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) 1 Nos • Three Piece Laparoscopic Hook Scissors, Rotating, Size 5 Mm, Length 36 Cm, Jaws Not Crossing With Connector Pin For Unipolar Coagulati On, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Outer Tube, Insert, Three Parts Dismantel 1 Nos • Three Plece Laparoscopic Autoclavable Grasping And Dissecting Forceps, Single Action Jaws, Fenestrated, 360 Degree Rotational Sheath, Size 5 Mm, Length 36 Cm, Long, Ergonomic Metal Handle With Plastic Finger Rings With Larger Contact Area At The Finger Ring To Avoid Pressure Sores, Can Be Dismantled With The Press Of A Button. 1 Nos • Suction And Irrigation Tube, Anti-Reflex Surface With Two-Way Stopcock, For Single Hand Control, Size 5 Mm, Length 36 Cm 1 Nos • Olsen Suction Or Irrigation Tube, With Protection Basket, With Trumpet Valve, Size 10Mm Length 36Cm. 1 Nos • Dissecting-Electrode, L-Shaped, Size 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Consisting Of: Outer Tube, Insulated Plastic Handle Electrode L-Shaped With Trumpet Handle 1 Nos • Coagulating And Dissecting Electrode, L-Shaped, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Coagulating And Dissecting Electrode, Spatula-Sheaped, Blunt With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Macro Needle Holder, Ergonomic Axial Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Left Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Macro Needle Holder, Ergonomic Pistol Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Right Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Dismantling Needle Holder, Ergonomic Pistol Grip With Disengage Able Ratchet, Ratchet Release On The Left Side, Jaws Curved Left, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm Consisting Of: Insert, Outer Tube, Handle 1 Nos • Unipolar Hf Cord With 4Mm Banana Plug And Length 300 Cm 1 Nos • Clip Applicator, For Use With Ethicon Titanium-Clips Lt-300 (Medium Large), Dismantling, Rotating, With Ratchet To Lock The Jaw Part Holding The Clip, Size 10 Mm, Length 36 Cm, Consisting Of: Metal Handle, With Ratchet Metal Outer Tube Insert, Three Part Dismantel, 1 Nos • Claw Forceps, Rotating, Size 10 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Metal Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Claw Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube 1 Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Especially Suitable For Dissection, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Fine Atraumatic Serration, Fenestrated, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1 Nos • Bipolar Hf Connecting Cable Length 300 Cm, Compatible With All Standard Cauteries – 1 Nos • Fascial Closure Instrument For Sub Cutaneous Ligature Of Trocar Incisions – 1 Nos • Myoma Fixation Instrument, Screw Shaped, 5 Mm. – 1Nos • Dismantling Fan Retractor, Distendable, Size 5 Mm, Length 36 Cm.- 1 Nos • High Frequency Needle, For Splitting And Coagulation, Insulated, Retractable, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 31 Cm. 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) - 1 Nos • Uterine Manipulator: Uterine Manipulator For Providing Tissue Tension Needed For Anatomical Surgery. The Manipulator Should Have Application In Tlh, Lash, Lavh And Hysterectomies For Malignant Pathologies 1 Nos • Sterilization Tray For 2 Telescopes (Same Manufacturer) • Sterilization Tray For Instruments (Same Manufacturer) Hysteroscopy Set Hysteroscope Sheath For Diagonostic Continuous Irrigation Size 6.1-6.3Mm Outer Sheath And 5.1-5.3 Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. Hysteroscope Sheath For Operative Continuous Irrigation Size 5.9-6.1Mm Outer Sheath With Operating Channel 5Fr, Leur Lock Adaptor And 5.3-5.5Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. With Stopcock & Leur Lock Adaptor And Inflow And Outflow Channe Semi Rigid Instruments For Use With Operating Hysteroscope Scissors Semi Rigid, Blunt Tips, 5 Fr., Length 36-40Cm, Single Action Jaws Scissors Semi Rigid, Pointed Jaws, 5 Fr., Length 36-40Cm, Single Action Jaws, Semi-Rigid Biopsy- And Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Tenaculam Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Bipolar Vaporization Electrode, Semirigid, 5 Fr., Needle Electrode Angled 90°, Length 42Cm Bipolar High Frequency, Should Fit In Most Of The Standard Electrosurgical Unit Having Bana Plug One Side, Length Should Be Not Less Than 250Cm Telescope 12, Enlarged View, Diameter 4 Mm, Length 30 Cm, Autoclavable, Fiber Optic Light Transmission Incorporated Bipolar Working Element To Be Used With 26 Fr Resectoscope Sheath: Motion By Means Of A Spring. The Thumb Support Is Movable. Return Of The Loop Is Control By The Thumb And In Rest Position The Electrode Should Rest Inside The Operating Sheath, To Be Used With 4Mm Hysteroscopy Telescope. Should Work In Saline Bipolar Cutting Loop 24 Fr Should Work In Saline Cutting Electrode 24Fr, Bipolar, Pointed, Should Work In Saline Coagulating Electrode 24Fr, Bipolar, Ball End Should Work In Saline Continuous Flow Resectoscope Sheath 26 Fr., For Bi-Polar, Including Connection Tubes For And Outflow, 2 Luer-Lock Adaptors, 26Fr, Oblique Beak, Rotating Inner Tube, With Ceramic Insulation, For Use With Working Element. Should Work In Saline Obturator, For Use With The Resectoscope Sheath. Fluid Management System (Irrigation & Suction Unit) Pressure Regulated Suction And Irrigation System For Use In Laparoscopy And Gynaecology Unit Should Have Touch Screen As User Interface. Unit Should Have Feature Of Automatically Fixing Maximum Parameters For Laparoscopy And Hysteroscopy Mode By The Choice Of Tubing Unit Should Have Feature Of Simultaneous Display Of Set Values And Actual Values Enabling User For Continuous Monitoring Of Suction And Irrigation Parameters Unit Should Have Feature Of Use Of Disposable/Reusable Cassette Tubing Set For Laparoscopy/Hysteroscopy Procedures. Unit Should Be Supplied With Glass Suction Bottle 5 Lite Unit Should Have Pressure Settings: Hysteroscopy Mode: 0-200 Mmhg Laparoscopy Mode: 100/300/500 Mmhg Unit Should Have Flow Settings: Hysteroscopy Mode: 200/400/600 Ml/Min Laparoscopy Mode: 0-1300Ml/Min Suction Pressure Regulated: Hysteroscopy Mode: 0.1-(-)0.8Bar (-80Kpa) Laparoscopy Mode: 0.1-(-)0.8Bar(-80Kpa) Power Supply: 100-240Vac, 50/60Hz Certified To: Iec 601-1, Ce Nach Mdd Certified To: Iec 601-1, Ce Acc. To Mdd Note: - All The Above Items Should Be Usfda And European Ce Certified And From Same Manufacturer For Better Compatibility And Maintenance , Integrated Electrosurgical Unit And Vessel Sealer Brand -Ensurge/ Hti Digital / Kls Martin / Enertech/Shalya Specifications For Integrated Electrosurgical Unit And Vessel Sealer 1) Advanced Electro Surgical Unit With Vessel Sealing System Have Mono Polar Cut & Coagulation, Bipolar And Vessel Sealing Technology, All Integrated In Single System 2) Type Of Display Should Be Lcd Touch Screen 3) Display Size Should Be 5” Or More 4) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology. 5) The System Should Have Capability To Convert Electrical Energy To Radio Frequency Energy Thus Providing Radio-Frequency Seal 6) Number Of Tissues Sensed Per Sec Should Be 4000 Or Higher 7) Vessel Fusion System Must Be Able To Seal Artery, Veins Along With Tissue Bundle Up To & Including 7Mm In Diameter & Sealed Vessels Should Be Able To Withstand At Least 3 Times The Systolic Blood Pressure. 8) Low Frequency Leakage Should Be 50 Or Higher (In Ma) 9) High Frequency Leakage (Rf) Must Be Less Than 100Ma In Mono Polar And Vessel Sealing Mode And Less Than 70Ma In Bipolar Mode 10) Should Be Provided With Rs 232 Data Input Port For Software Upgrade Facility 11) System Must Have Recall Facility To Recall The Last Setting Used By User Before Turning Off The Power Directly Or Through User Programs. User Can Use Pen Drive With Their Setting To Recall The Setting Saved By Them. 12) System Should Have Bipolar Resection Including Under Water Cutting. 13) The System Should Be Provided With Twin Monopolar Socket (Only One Socket To Be Activated At A Time) With Independent Power Setting 14) 5 Or More Numbers Of Cutting Modes Available In Monopolar 15) Maximum Power Should Be 400W Or Higher 16) Maximum Power Of Blend Mode For Cutting With Homeostasis Should Be Not Less Than 250W 17) Fulgurate/Forced Mode, Spray Mode, Soft Mode Of Monopolar Coagulation Should Be Available. 18) Unit Should Be Supplied With 4 Or More Nos. Of Monopolar Coagulation Modes 19) Coagulation Mode Power (Monopolar) Should Be 150W Or Higher 20) Coagulation Mode Power (Bipolar) Should Be 120W Or Higher 21) Number Of Bipolar Cutting Modes Should Be Or Greater Than 5 22) Maximum Power For Ligation Not Less Than 100W 23) Maximum Power For Resection Not More Than 300W 24) Equipment Should Have On Screen Review Of Error Codes And Diagnostics. 25) System Should Have Patient Plate Contact Quality Monitoring System Giving Audio-Visual Alarm And Deactivating Output If Contact Between Patient And Patient Plate Is Not Proper To Eliminate The Risk Of Patient Burns. It Should Be Mandatory, Should Have Contact Quality Monitoring With Split Style Patient Return Electrode And Deactivates Output If Contact Between Patient And Patient Return Electrode Is Not Proper To Eliminate The Risk Of Patient Burns, Manufacturing By Same Oem 26) Auto Bipolar Start And Stop Along With User Configurable Auto Start Facility Should Be Available 27) Power Output Of Vessel Sealing System (Vss) Not More Than 150W 28) Vessel Sealing System Should Be Able To Seal Vessels Or Tissue Bundles Faster Than Any Conventional Devices (Preferably Within 2-4 Seconds) 29) Product Should Be Ce Certified (4 Digit Notified Body). 30) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification & Iso 9001: 2008 & Iso 13485:2003 Certified Company. 31) Warranty Of The Unit Should Be 5 Years 32) It Should Be Supplied With All Following Accessories, Should Be Reusable And Autoclavable: - O Patient Return Electrode --- 1 No. O Cable For Return Electrode --- 1No. O Hand Switching Pencil --- 1 No. O Foot Switching Pencil --- 1 No. O Double Pedal Footswitch With Toggle Function (Common/Individual For Monopolar, Bipolar And Vessel Sealing) - 3 No. O Universal Adaptor --- 1 No. O Bipolar Forceps --- 1 No. O Cable For Bipolar Forceps --- 1 Nos. O Set Of Electrode (Angled, Ball And Needle) ------ 1No. O Reusable Sealing Clamp With Cable--- 1 No. O Curved Jaw Vessel Sealer 5 Mm, 32 To 37 Cm -- 1 No. O Autoclavable Reusable Cutting Instrument – 1 No. Additional Terms & Conditions: 1. Vessel Sealing Laparoscopy Instruments Should Have Both Hand And Foot Activation Mode And Should Be Eu Ce (4 Digit Notified Body Certified) Or Usfda Approved. 2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode. 3. R.F. Frequency Should Be In Between 350-500Khz For All Modes. 4. It Should Have Bipolar Rf Scalpel Mode For Dissection & Desiccation. Rf Bipolar Scalpel Instruments Should Have Hand Control Button For Coagulation & Cut. 5. Equipment Should Be Usfda Approved/ Eu Ce (4 Digit Notified Body Certified). It Should Have Iec-60601-1- 1, Iec 60601-2-2 Safety And Des , Ctg Machine Brand - Bpl/Maestros/Bistos Specification Foetal Monitor With Display And Printer Should Have 12.1” High Resolution Colour Tft Display With Tiltable Screen For Better Viewing. Should Display Fhr, Toco, Foetal Movementin Numeric Values . Should Display 2 X Fhr And Toco Graphs In Different Colours. Should Have The Facility For Data Save With Play Back & Print Facility Should Have Facility To Monitor Information Of Last 25 Hours Should Have Special High Sensitive Watertight Probe For Better Durability Should Have The Low Ultrasound Power For The Safety Of The Foetus Should Have Automatic Foetal Movement Detection Should Have Event Marking Facility By Mother And User Thermal Printer With Minimum 152Mm Paper Width Is Essential For Broader Printouts Standard Configuration Should Be Fhr, Toco, And Foetal Movement Should Have Volume Control For Fhr Beep Sound And Alarm. Should Have Alarm Setting For Weight Should Be Less Than 4 Kg For Easy Portability. Should Have Foetal Stimulator Built In To Fhr Probe And Activation Key Should Be There On The Front Panel. Stimulation Should Be Recorded On The Recording Paper And Should Be Displayed On The Screen. Built In Rechargeable Li-On Battery For Backup Should Work With Input 200 To 240Vac 50 Hzsupply Central Monitoring System Software Upgradability Should Be Possible (Optional) Should Be Supplied With The Following Standard Accessories: Power Cord- 01 Fhr Probes – 01 Nos Toco Probe -01 Patient Event Marker Belts – 02 Nos Gel – 1 Bottle Thermal Paper- 02 No , Digital Video Colposcope Brand - Bpl/Maestros/Bistos Specification 1. Should Have Led Cold Lighting System Reproduces An Original View Of Tissue. 2. Led Lights Are Replaceable. 3. Should Have Advanced And Fast Auto-Focusing System To Ensure Clear Image. 4. Should Have Remote Capture Control And User-Friendly Keyboard Layout For One Handed Operation. 5. Should Have Electronic Green Filter That Enhances Vascular Image Display Without Compromise Of Illumination. 6. Should Have Working Distance Of 6.7 - 11.8 (170 - 300 Mm). 7. Should Have Magnification Of 1X - 36X. 8. Should Have Resolution Of 3,80,000 Pixels Or More 9. Should Have Horizontal Resolution Of > 470 Lines. 10. Should Have Field Of View Of 0.4 - 5.9 (10 - 150 Mm). 11. Signal/Noise Ratio Should Be = 50 Db. 12. Should Have Signal Output Of S-Video, Pal/Ntsc. 13. Should Have Acetic Acid And Iodine Reaction Test Timer To Precisely Detect Low/High Grade Cin. 14. Should Have Real-Time Display Of Magnification. 15. Should Have Powerful Colposcopic Findings Gallery For Comparison Analysis. 16. Should Have R-Way Evaluation Program Supports Cervical Disease Diagnosis Guidance For Clinical Users. 17. Should Have Dicom 3.0 Supportive. 18. Should Be Manufactured By An Iso Certified Company , Vessel Sealing Device For Open Surgery Shaft Length-23Cm Curved Tip (Box Of 6)(A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology. Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A} Curve Jaw Vesselsealer B) Should Be Able To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. C) Sealing Should Withstand 3 Times Systolic Pressure. D) Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 23 Cm; Shaft Diameter 5 Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. Technical Specification For , Vessel Sealing Laparoscopic Surgery, Shaft Diameter-5Mm, Length-37 Cm Jaw Type Curved Jaw Double Action With Contoured Tips, Shaft Rotation 350 Degrees, Jaw Surface-Textured Ceramic Stops.Jaw Aperture-13Mm Seal Plate Length- 20.3(Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Blunt Tip Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Sealing Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm D) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness:Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. E) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Instrument For Open Surgery, Instrument Length 20.6Cm-21 Cm, Curved Jaw, Hand And Foot Switching(Box Of 6). Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Exact Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 21 Cm. D) Curved Jaw In 28 Degrees, Seal Length 19.3Mm, Cut Length: 18.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device Laparoscopic Surgery. Shaft Diameter-5 Mm, Maryland Jaw Curved Device Length 37Cm (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec B) Sealing Should Withstand 3 Times Systolic Pressure. Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm; Shaft Diameter 5 Mm C) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation D) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device For Open Surgery With Shaft Length 18.8 Cm, Jaw Type-Curved Jaw (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Small Jaw Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 18.8 Cm. D) Curved Jaw In 28 Degrees, Seal Length 16.5Mm, Cut Length: 15.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Ethelene Oxide Sterlization Machine ( Brand - Steri Techno Fab/ Map Industries) 1) Eto Gas Sterilizer Should Be Fully Automatic Type With Software-Controlled Operation System For Low Temperature Sterilization Of Heat And Moisture Sensitive Medical And Surgical Items. 2) The Chamber Should Be Preferably Rectangular With Capacity Of 250 Litters Or 9 Cu. Ft. & Dimension 48”(L) X18”(W)X18”(H). 3) The Operating System Should Be Programming Logical Controller Based And Should Have Touch Screen Human Machine Interface From Where User Should Operate And Observe The Cycle . 4) The Inner Surface Should Be Smoothly Finished To Minimize Gas Deposits. 5) Manufacturer Should Provide The Test Report To Prove Conformity To Specification And Ability Of Eto Unit To Achieve Complete Pathological/Microbiological Elimination. The Test Of Report Has To Be Attached With Technical Bid Document. 6) Surface Heaters Should Mount On The Chamber For Uniform Temperature In Chamber Throughout Cycle. 7) Less Noisy And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 8) The Machine Should Be Provided With Plc Based Automation Along With Lcd Hmi Which Allows The Operator For: (A) Change And Set The Parameters (B) Run The Cycle According To Pre-Selected Cycles. (C) Monitor Various Phases / Individual Parameters During The Process. (D) View On/Off Status Of The Various Components Of The Machine While The Cycle Is In Progress. 9) It Should Have Password Protection For Unauthorized Access & Analogue Input Of Process Pressure/Vacuum. 10) It Should Have Digital/Analogue Input For Temperature & Temperature Should Be Indicated In The Sterilization Area, By The Use Of A Temperature Sensor. 11) One Pressure/Vacuum Sensor For Display Of The Current Pressure/Vacuum, That The Load Should Be Subjected To, At All Times During The Process. 12) The Software Should Provide & Maintains Total Records Required For Process Parameters During The Sterilization Cycle. These Records Are Necessary For Meeting Ce Or En 1422 Norms Of Sterilization. 13) All The Fittings For The Accessories And The Main Vessel Should Be Fabricated From Ss 304 Stainless Steel. All The Valves Used In The Process Lines Should Be Ss 304/Brass/Teflon Construction Ball Valves. (All Standard Makes) 14) Pressure Testing And Vacuum Testing As Per Specified Standards. (1.5 Times The Working Pressure) 15) Automatic Operations As Well As Manual Operations In Case Of Technical Problems Should Be In Plc/Hmi. 16) Machine Should Not Open During Sterilization Process, It Should Be Open Only After Complete Cycle Of Sterilization. 17) It Should Be Plc Based Automation System. Plc Should Be Honeywell Or Siemens. System Should Be 21 Cfr Compliances. 18) Automation Should Be 7’’ Touch Screen Display Of Schneider Or Proface Or Equivalent. 19) The Construction Of Chamber Should Be Of Ss316 Grade Stainless Steel. 20) There Should Be Interlocks With Door Mechanism So Cycle Should Start Only After Closing Of Door. 21) Cartridge Puncture Operation Should Be Automatic Into The Chamber No Need Of Manual Puncturing. 22) In Case Of Cartridge Puncture There Should Be Alarm System. 23) One Complete Cycle Should Be Containing All Phases. Time Based Parameter Should Be Mention In Non-Editable Data Sheet. 24) Temperature, Pressure, Humidity, And Other Parameters Should Be Display In Hmi Screen. 25) It Should Be Noise Proof And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 26) It Should Be In Built Aeration Phase To Remove Residual Gas Out From Sterile Item. 27) Pre-Requisite Sequence Phases Should Define To Run Cycle In Auto Mode. 28) Pre-Sterilization Phases Should Define To Create Proper Condition For Sterilization (I.E. Humidity& Temperature). 29) Post-Sterilization Phases Should Define To Remove Residual Gas From The Product. 30) Machine Should Have Manual Override Operating Facility. 31) Accessories Needs To Be Supplied With Machine: - ? Suitable Air Compressor Of 1 Hp Capacity. Air Compressor Should Be Oil Free And Less Noisy As Compared To The Traditional Oil-Based Compressor. ? 1 Nos Wire Mesh Type Basket For Loading & Un-Loading Of Sterilization Materials. ? Manual Sealing Machine Suitable Medical Use Sealing. Machine Should Operate On 240 V/50 Hz Operated And Make In India Product. Eto Gas Cartridge Of 1 0 0 Grams- 1 0 Nos. Eto Cartridge Should Be Of Same Make Of Machine. Bidder Must Have To Attach Msds Sheet Of Eto Gas Cartridge With Bid Document. 32) The Manufacturer Shall Have Below Listed Certification To Prove His Eligibility And Copy Of The Certificates Should Be Enclosed With The Offer. ? Iso 9001:2015 For Quality Management System. ? Ce Certificate For Eto Sterilizer & Eto Cartridge Compliance With The Requirement Of Directive Council Directive On Medical Devices 93/42/Eec As Amended 2007/47/Ec. ? Quality Management System For Medical Devices Iso 13485:2016 For Eto Sterilizer & Eto Cartridge. ? Risk Management To Medical Devices Iso 14971:2007 For Eto Sterilizer & Eto Cartridge. ? Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use - Part 2-040: Requirements For Sterilizers And Washer Disinfectors Used To Treat Medical Materials Iec 610102-040:2020 & Iec 61010-1- 040:2020. ? As Eto Gas Toxic And Carcinogenic Properties Environment Management System Certificate. ? Medical Electrical Equipment Iec– Part 1-2: Requirement For The Basic Safety And Essential Performance Of Multifunction Patient Monitoring Equipment. ? Iso 45001:2018 For Occupational Health And Safety Management System. ? Iso 20857:2010 And Rohs Directive (2011/65/Eu) On The Restriction Of Use Of Certain Hazardous Substances In Electrical And Electronic Equipment. ? Fda & Who-Gmp Certificates To Prove Standard Of Manufacturing Practice , Ot Light ( Brand - Shalya/Mattrix/Surgident) Description Of Function Led Surgical Lights Illuminate The Surgical Site For Optical Visualization Of Small Low Contrast Objects At Verifying Depths In Incisions And Body Cavities. 1. General Requirements 1.1. The Light Shall Adopt Led Technology To Create A Homogenous Light Patch Without Emitting Any Infrared Rays. 1.2. The Light System Shall Be Dual Light Heads, One Major And One Satellite. 1.3. Light Should Have Electronic Focusing From Control Panels Without Any Motorized Or Mechanical Movement Of Light Panels. 1.4. All Dome Should Have 2 Colour Led Lamps, White (Cool White) & Amber (Warm White) To Achieve High Cri And Get The Required Shade Of Light As Per Different Surgical Requirements. 1.5. High Power Leds Of 5Watts & Above Should Be Used To Provide High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area <2 Deg. 1.6. Lights Should Have Higher Watts Leds To Achieve High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area. 1.7. Pulse Width Modulation-Controlled Led Driving To Ensure Less Heating Of Led Which Increases Life Of Leds And No Change In Light Colour Output And Light Colour Temperature Throughout Life. 1.8. The Major System Shall With Automatic Illumination Control System With Sensors On The Light Head. When Some Part Of Led Is Masked By Surgeon’S Head Or Shoulders, The Remaining Led’S Will Become Brighter Automatically To Compensate For The Losing Illumination. 1.9. Light Intensity Shall Be Adjustable Between 30% -100% And Should Have Low Intensity Light For Endoscopy Mode. Light Intensity, Light Field Diameter And Color Temperature Should Be Controlled From Electronic Touch Control Panel Mounted On Light Arm And Wireless Wall Mount Electronic Touch Control Panel. It Should Also Have Provision To Control The Intensity, Electronic Focus, Depth From Sterile Field Though Capacitive Touch Control Handles. 1.10. The Light Head Shall Be Of Petalled / Winged Shape To Avoid Obstruction To Laminar Flow On Surgical Field. 1.11. The Color Temperature Shall Be Synchronized & Controlled By Either Light Head Control Panel. 1.12. The Light Shall Be Mountable To Ceiling From Single Center With 360-Degree Rotation Of All Arms. Spring Arms Shall Be Rotatable At Least 360 Degrees Around Its Own Axis. Each Dome Head Should Be Rotatable With 360 Degree At Connecting Joint With Spring Arm And At Least 300 Degrees Around Its Own Axis. This Feature Should Be Applicable With A Camera Mounted Dome Also. 1.13. The Maximum Movement Angle Of The Spring Arm Shall Be At Least Up 45°And Down 50 1.14. The Thickness Of The Light Head Shall Be No More Than 70 Mm. 1.15. Each Led Shall Be Replaceable Individually To Save Cost In Case Of Failure, Instead Of Replacing The Module With Several Leds. 1.16. The Surgical Light Should Be Complete With All Components For Celling Mount And Electrical Feed-In, Including Finalized Installation. 1.17. Detachable & Auto Cleavable Handle (3 Nos.) For Each Light Should Be Provided. 2. Technical Requirements Of Both Domes: 2.1 It Should Have 2 Colour Led Lamps, White ( Cool White) & Amber( Warm White) 2.2 The Central Illuminance Should Be 160,000 Lux 2.3 Light Field Diameter Should Be Adjustable From 150Mm To 300Mm 2.4 D10: 300Mm & D50 :160Mm 2.5 Color Temperature (K), Adjustable From 3500-5000K 2.6 Color Rendering Index Ra Should Be 95 Or More And R9 Should Be 93 Or More 2.7 Depth Of Illumination (L1+L2) As Per Iec 60601-2-41 (Ver 2003) Should Be 650Mm And As Per Iec 60601-2-41 (Ver 2008) Should Be 1200Mm. 2.8 Dimming Range Should Be Between 25-100% 2.9 Endoscopy Mode Illumination Should Be Less Than 5% Of 160,000 Lux 2.10 Number Of Led Bulbs The Light Head Should Not Be More Than 70 2.11 Led Service Life Should Be Minimum 60000Hrs 2.12 Light Head Dimension Should Be 700Mm (=/- 20Mm) 2.13 Max. Power Consumption Of All Light Sources Should Be Less Than 100W At Maximum Setting. 2.14 Power Supply Should Be 100-240V Ac, 50-60Hz 2.15 One Dome Should Be Ready For The Wireless Camera Attachment. 3.Standards • Iso 9001:2008 • Iso 13485:2003, • European Ce With 4 Digit Notified Body / Eu Ce With Eu Free Sale Certificate /Us Fda Registered . • Should Compliance With: Iec 60601-1, Iec 60601-2, Iec 60601-2-41, Certificate From Any Nabl Accredited Lab / Any Lab From Country Of Origin For Imported Brands , Suction Machine (Electrical) (Brand -Supreme / Goley) Type: Electrical Pump Type: Oil Immersed Rotary Vane Capacity: High Vacuum Voltage: 220 Vac, 50 Hz, 1 Ph Number Of Wheels: 04 (Antistatic) Air Flow: 35 Ltrs/Min Current: 1.8A Noise (Decibel): 30~35 Dba Power Consumption: 370W Weight: 25 Kgs Flow Rate: 35 Lpm Vacuum Gauge: 100Mm Reservoir Volume: 5000Ml Tubing: Non-Collapsible Suction Tubing Max Vacuum: -720Mmhg Motor:½Hp, Fhp 100% Copper Winding Rpm: 1440 Jars: Polycarbonate 2X2.5 Liters Capacity Filter: Bacterial Filter Autoclavable /Reusable Suction Machine Should Be Is I Marked , Fully Automated Biochemistry Analyser Brand (Erba Transia/ Meril) Random Access System With Stat Capability. Analytical Principle Spectrophotometry & Photometry, Turbidometry Principles. Assay Type End Point, Rate, Fixed Point, Kinetic, Ise (Optional). On Board Parameter - Present. Programmable Tests - Present. On Board Cooling For Reagent Present. Through Put - 200 Test/Hour Or More, Continuous Loading Facility. Sample Types Serum, Plasma, Urine & Other Body Fluids. Sample Volume 0-70 Micro Litres (Approx). Sample Quality Analysis, Clot Detection & Probe Crash Protection - Present. Reagent Volume 10 Microlitre To 300 Microlitre (Approx.). Total Reaction Volume 90 Microlitre To 350 Microlitre. Reaction Cuvettes - Permanent Glass Cuvettes With On Board Laundry. Possibility Of Replacement Of Individual Cuvette. Photometric Range 0-3.0 Od. 15. Wavelength-340-800 With Minimum & Standard Wavelengths (340, 405, 505, 546, 578, 600, 700 Nm) Calibration Autocalibration, Cooled Calibration Position, History Of Graphical Calibration Data Stored. Quality Control At Minimum 4 Level Qc Plot Westgard Rules, Twin Plot, Levey Jennings Graph, Cooled Qc Position. Data Storage Of Patient Present Proper System Of Storage Minimum Water Consumption. Warranty 5 Years Warranty Power Back Up Facility For Instrument. Autopipettes To Be Provided With Instrument 10 Micro Litre (Fixed) 01 Nos. 1000 Micro Litre (Fixed) 01 Nos. 0-100 Micro Litre (Variable) 01 Nos. 0-500 Micro Litre (Variable) 01 Nos. 100-1000 Micro Litre (Variable) 01 Nos. Demo Kit With Instrument Reagents Kits Provided With Instrument: Creatinine, Urea Uric Acid, Triglyceride, Sugar Cholesterol, Tp, Albumin, Sgpt, Sgot, Alkaline Phosphatase, Bilirubin Instrument: Usfda Registered And Ce Ivd Approved , Cbc Machine Brand -(Accurex / Erba/ Meril) Measurement Principle Electrical Impedance For Counting Rbc Wsc & Plateletscolorimetric Estimation Of Hgb At 540 Nm Parameterswbc, Ly#, Mid, Gr, Ly%, Mid%, Gr, Rbc, Hgb, Hct, Mcv, Mch, Mchc, Rdw-Cv, Rdw-Sd, Plt, Mpv, Pdw, Pct, P-Lcr, P-Lcc Throughput- 60 Samples/Hour Micro-Aperturewbc: 100 ?M Rbc/Plt:68 ?M Sample Typewhole Blood Or Pre-Diluted Sample Sample Volumewhole Blood (Venous Blood): 10 ?Lpre-Diluent (Capillary Blood) : 20 ?L Chamberdual Chamber: Rbc/Platelets & Wbc/Hgb Reagents- 3 Reagent System: Diluent, Detergent & Lyse (Non-Cyanide) Measurement Range Linearity Range Acceptable Limits Wbc0x10/L-10.0×109/L<= Plus/Minus 0.3 * 10 ^ 9 / L 10.1×109/L-99.9×109/L 0X102/L-1.00×102/L <= (Plus/Minus 5)%<= Plus/Minus 0.05 * 10 ^ 12 / L Rbc 1.01X102/L-9.99X102/L<= (Plus/Minus 5)% Quality Control - 4 Qc Options: L-J, X-B, X-R & X Qc Graphs Plotted With 31 Data Points Data Memory - Upto 100,000 (With Histogram) Display - 10.4 Inch Color Lcd With 640 * 480 Resolution Printer Built-In Thermal Printer Interface:Support Rs-232C, Standard Network Port And Usb; Keyboard And Mouse Operating Environment - Temperature: 15°C-35°C Electrical Specification-Fuse Specification: 250V/3A Humidity: = 85% Rh Frequency: 50/60 Hz Low: 1 X 3Ml/Normal: 1 X 3Ml/High: 1X3 Ml , Sthetoscope Brand- Bpl/Littman , Pulse Oxymeter Brand - Dr Trust /Beurer/ Bpl Specification Finger Chamber With Smart Spring System Accommodates A Wide Range Of Finger Sizes Pop-Up Menu To Setup Alarm Limits For Spo2 And Pulse Rate Low Battery Indicator Pule Rate: Yes Auto Power-Off: Yes Bright, Large Display For Better Visibility In Daylight Anti-Movement Feature Sturdy, Portable And Light-Weight Very Easy To Operate With Single Switch Operation Warranty ( Only Checking Warranty ) , Nebulizer Machine ( Brand -Bpl/Dr Trust) Operation Mode Table Top Size Compact Application Clinical Purpose, Hospital Medicine Cup Capacity 50 Ml Particle Diameter 1-5 Um , Pns ( Pereferal Nerve Stimulator For Nerver Block) Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Should Be Suitable To Identify Peripheral Nerves And Giving Percutaneous Stimulation In Neuro Muscular Block. - Should Have A Percutaneous Monopolar/Bipolar Stimulating Handle For Localization Of Nerves Without Puncturing The Nerve Which Should Be Autoclavable. - Should Have Selectable Stimulation Intensity Ranging From 0-60Ma In Steps 0.1Ma With Stimulating Handle And Stimulation Impulse Width From 0.3Ms, 0.5Ms And1.0Ms - Should Continuously Measure & Display Actual Current Passing Through The Patient And Selected Current -Should Have Pause Function To Interrupt Stimulation Without Delivering Impulses Test Function -Should Automatically Switch Off With A Acoustic Warning If Not Operated Over A Period Of 20 Mins -Should Have Lcd Display For Stimulation Current, Impulse Pattern, Pulse Width, Impulse Amplitude. - Should Have Analog And Digital Display Of Selected Current And Actual Current. - Should Have Membrane Touch Pads For Choosing Stimulation Function -Should Be Small (Pocket Size) & Light Weight. Should Be Ce Certified Or Usfda Certified , Nerve Locator With Needle Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Separate Output For Nerve Stimulator - Mapper And Locator For Safety. Automatic Switch Over From Mains Power Adaptor To Rechargeable 9Vbattery With Low Battery Warning Indicator. Feather-Touch Keypad For Easy Operation, Simple Setting And Extended Reliability. Variable Current Range As Per The Selected Mode(Impedane:0 To 5 Kohm). User Programmable Pulse Width And Frequency. Alphanumeric Lcd Display With Back Light. Automatic Shutdown For Power Saving. Audio And Back Light On-Off Option. Alarm: Audio-Visual-Alarm Is Activated If Flow Of Oxygen Falls Below 1Lpm. , Percussion Hammer Ss 304 , Tuning Fork 128 Hz Satinless Steel , Laryngoscope A Laryngoscope Is A Device Used In Medical Procedures To Visualize The Trachea By Inserting A Blade With A Small Light Into The Patients Mouth , Oxygen Concentrator Brand- Philips/Bpl/Deck&Mount 1. Flow Rate :-0-5L/Min 2. Purity 93+3% 3. Outlet Pressure(Mpa):-0.04-0.07 4. Sound Level :-<50 Dba , High Flow Nasal O2 Cannula (Brand- Drager / Niceneotech ) High-Flow Nasal Oxygen (Hfno) Therapy Delivers Heated And Humidified Oxygen At High Flow Rates (Up To 60 Liters Per Minute) Through A Nasal Cannula , Electric Needle And Syringe Destroyer Hub Cutter Stainless Steel With Auto-Cut Protection , Clinical Thermometer(Digital) , Medical Labrotary Refrigrator ( Brand- Remi / Vav Intruments) Capacity 600 Litres Temperature Range 2°C To 8°C Internal Configuration Adjustable Shelves And Storage Bins For Optimal Space Utilization Cooling Type Uniform Cooling For Consistent Temperature Distribution Display & Controls Digital Display With User-Friendly Controls Power Supply Energy-Efficient Performance , Refrigrator Domestic Single Door Godrej/ Kelvinator/ Bluestar Capacity 200 Litres To 265 Liters Temperature Range 2°C To 8°C , Wieghing Scale Mannual , Knee Hammer , Sahli,S Heamoglobinometer , Artery Forcef Staright 6 (Brand - Jj Instrument) , Double Hook Retractor Standard Size (Brand - Jj Instrument) , B.P Handleno 3 (Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 4 Mosquito(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 6 Medium(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 8 Long(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 9 Long(Brand - Jj Instrument) , Allies Forceps Big (Brand - Jj Instrument) , Allies Forceps Medium (Brand - Jj Instrument) , Allies Forceps Small (Brand - Jj Instrument) , Mayo Scissior Str 5 ½ Sttilette Edge(Brand - Jj Instrument) , Mayo Scissiorcvd 6 ¼ Sttilette Edge(Brand - Jj Instrument) , Scissors Straight 6 Medium(Brand - Jj Instrument) , Scissors Straight 5 Small(Brand - Jj Instrument) , Scissors Straight 8 Big(Brand - Jj Instrument) , Steinman Pin Introducer Ss(Brand - Jj Instrument) , Towel Clip 6 Big(Brand - Jj Instrument) , Towel Clip 4 Small(Brand - Jj Instrument) , Wire Cutter 9 Standard Size(Brand - Jj Instrument) , Detnal Wire Standard(Brand - Jj Instrument) , Langenbeck Retractor Medium(Brand - Jj Instrument) , Langenbeck Retractor Small(Brand - Jj Instrument) , Langenbeck Retractor Big(Brand - Jj Instrument) , Cats Paw Retractor Standard Size(Brand - Jj Instrument) , K-Wire Cutter With Tungsten Carbide Tip 7 Standard(Brand - Jj Instrument) , Hintermann Distractor Medium(Brand - Jj Instrument) , Mippo Wire Passer For Long Bone Large(Brand - Jj Instrument) , Wire Bender Standard Size(Brand - Jj Instrument) , Kocher Clamp 8 Standard Size(Brand - Jj Instrument) , Glucometer (Brand-Dr Trust / Dr Morphen/Accucheck/Accurex) Fast Result In 5 Seconds Small 0.5Ul Blood Sample Size Large Memory. 10 Lancets Minimum Blood Sample: 0.5 Microlitre ; It Features A Large Display Screen That Can Store Up To 300 Test Results , Vortex Mixture (Brand -Remi /Borosil/ Benchmark) Type Of Product Cyclomixer Shaking Movement Orbital Orbital Diameter (Mm) 4 Motor Type Shaded-Pole Motor , Bio Saftey Cabinet Type-Ii A Microflow (Brand - Microflow / Thermofisher) Specification Material Of Construction (Main Body) Crca/Gi Powder Coated/Stainless Steel 304 Material Of Construction (Work Table) Stainless Steel 304 Dimensions External (Wxdxh) -1950 X 900 X 2250 Mm Internal (Wxdxh) - 1830 X 610 X 610 Mm Average Air Velocity - 90 ± 20% Fpm Hepa/Ulpa - Efficiency 99.997%/99.999% Class Level - Iso 3/5 (Class 100) Noise Level - 65 ± 5 Db Electrical - 230 V, 50 Hz, Single Phase Special Features - Motor Driven Front Door, Alarm, Hepa Filter Blockage, Timer For Uv Light, Power Socket Inside The Cabinet Pressure Sensor Monitoring, Digital Airflow Verification, Interior Eye Level Display, Display Parameters Including Down Flow Air Velocity, Total Operating Hours. Standards Us Fed Std 209 E, Iso 14644-1, Iest-Rp-Cc-002-2, Bsi Certifications- Ce & Iso , Co2 Incubator (Brand - Remi / Thermofisher) Specification Chamber Volume (150 Liters) Sensor Infrared Co2 Heating Method Air-Jacketed, Pid Control Co2 Range 0~20% V/V Co2 Control Resolution ± 0.1% (Ir Sensor) Temperature Range Rt+5~55°C Temperature Stability ± 0.1°C Humidity Method Natural Vaporization > 95% Co2 Recovery (Door Open 30S, Recovery To 5%) = 3 Min Temperature Recovery (Door Open 30S, Recovery To 37°C) = 8 Min Shelves 2 3 Interior Dimension (Mm) (W X D X H) 400 X 450 X 500 480 X 530 X 610 Exterior Dimension (Mm) (W X D X H) 590 X 687 X 790 670 X 767 X 880 Supply:220-240 Volts, 50 Hz Single Phase , Binocular Microscope - Olympus( Model Ch21i) / Magnus (Model- Pzb 22) (Specification) Optical System: - High Contrast Finite Colour Corrected Optical System Magnification:- 40X To 1000X Visual Magnification. Stand: Aluminium Die-Cast Stand With Hand Rests For Enhanced Comfort And Stability. Observation Head: - Sidentopf Binocular/Trinocular Head, 360° Rotatable, Interpupillary Distance 53-75Mm, With Dual Diopteric Adjustment. Eye-Piece: - Wide Field 10X F.O.V 22Mm, Anti-Fungal & Anti- Reflection Hard Coated (Optional 10X/18Mm). Nosepiece: - Reverse Angle Quadruple Nosepiece (Ball Bearing Type) With Precise Click Stops. Objective: - Qusp Series High-Contrast Flat Shield Plan Din Achromatic Objective 4X, 10X, 40X (S) And 100X Oil, (S), Anti-Fungal & Anti-Reflection Hard Coated. Mechanical Stage: - Rack-Less X Axis Double Plate Stage, Size 190 X 125Mm (+-5Mm) With Cross Travel 90 (X) X 50Mm (Y) On Ball Bearing With Co-Axial Controls. Hard Coated Surface For Scratch Resistance. Double Specimen Holder Clip. Focusing Control: - Co-Axial Coarse And Fine Focusing On Gear Systems For Smooth Operation. Fine Adjustment 0.2Mm/Rotation With Maximum 2-Micron Scale Increment. Condenser: - Sub-Stage Moveable Abbe Condenser, Centerable, Na 1.25 With Aspheric Lens. Iris Diaphragm And Special Frosted White Filter, Swing-In, And Swing-Out Filter Holder. Light Source: Led 3.5W 3V Illumination With Variable Illumination Control Universal Power Supply 110V-240V, Ce Approved. Supply With: Power Cable, Immersion Oil, Spare Bulb (In Led Only) User Manual, Vinyl Dust Cover, Cleaning Cloth, And 01 Units Fuses Optional Accessories: - Wooden Carrying Case, Pointers & Micrometre Reticules , Penta Head Microscope(Brand- Micron/Magnus/Weswox) Optical System- Infinite Optical System Viewing Head Inclination 30 Degree, Ipd: 48-75. 01 Piece Trinocular Head, Inclined At 30°, 360° Rotatable, Phototube With 100:0/50:50 Light Split With Sliding Prism. 04 Piece Compensation Free Binocular Head, Inclined At 30°, 360° Rotatable With Diopter Adjustment. Eyepiece-10 Pairs Of Wide Field Eyepiece Wf10x/22Mm Nosepiece- Inverse Quintuple Nosepiece. Objective Plan Achromatic Objective 4X Plan Achromatic Objective 10X Plan Achromatic Objective 20X Plan Achromatic Objective 40X Plan Achromatic Objective 100X Condenser - Swing Out Condenser N.A.0.9/1.25 Focusing-Coaxial Coarse And Fine Adjusting System With Tightness Adjustment And Upper Limited, Coarse Adjustment Range 30Mm. Fine Adjustment Precision: 0.002Mm Attachment- Multi Head Attachment And Support Stand. Stage- Ceramic Coated Double Layers Mechanical Stage Of 185X142 Mm With Capacity To Hold Two Slides At A Time With Slide Catcher On Left And Motion Control On Right Hand Side Illumination- External Illumination, Led 12V 100W Pointer - Multi Colored Ponters With Intensity Controllable Led Colored Indicator (Blue, Green And Red Led) Pointer 360 Rotatable, Brightness Adjustable, Arrow Control Sticks And Color Selection Dial. Video Adapter C Mount 0.5X Camera - 8Mp Hd Camera 4K Resolution With Removable Hd Card With Sd Card And Compatible Software. Display-43 Inch Hd Display Connected To Penta Head Camera For Live Display With Suitable Stabilizer For Display. Certifications - Ce(Notified), Ios 9001 (Iaf Accredited), Ios 13485 Warranty: 1 Year , All In One Pc ( Brand- Hp/Dell/Lenovo) All-In-One Pc 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, 710 White Wireless Keyboard And Mouse Combo (Windows 11 Home, Mso 21, Shell White, 6.72 Kg) 27-Cr0407in , Desktop ( Brand- Hp/Dell/Lenovo) 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, Wired Keyboard And Mouse Combo (Windows 11 Home, Mso 21) 27-Cr0407in , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 1.5 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 2 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Lithium Battery 1500Wh Battery 48W 120Ah ( Brand- Luminous /Amaron) , Executive Premium Office Chair, Leather “Adjustable Arms Ergonomic Chair Must Behigh Back ( Brand- Godrej) , Office Table4x3 Feet( Brand- Godrej) , Mid Back Office Chiar ( Brand- Godrej) , Revolving Stool ( Brand - Aliza /Godrej) 3 Leg Ss Top Powder Coated Thicknessminimum- 14 Gauge , Steel Almirah W X H X D: 91.44 Mm X 197.866 Mm X 485.140 Feet For Office Use(Brand- Godrej) , Xerox Machine (Hp/Canon/Ricoh) Print Duplex, Copy, Scan, A3 Black And White Laserjet Printer, Enterprise Departments/ Distributed Workforce, Laser Printers Print Speed Is Up To 22 Pages Per Minute (Ppm) For Black And White Printing , Imcubator Electrical 23 Lts Thermostat , Centrifuge Machine Clinical ( Brand - Remi /Benchtop) , Salters Baby Wieghing Machine , Oto Scope , Chloroscope , Horrock,S Appratus Portable , Sound Level Meter Decible Meter With Lcd Display , Water Depth Sampler , Vaccine Carrier , Mosquito Catching Kit , Craft Water Testing Kit
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 8
2.
Health and Family Welfare #10433254 Price Bid
Tender For Supply of Chemicals , Stationary. Electrical, Sports Items and Others, List Of Items (All Types) , 20% H2so4 (500 Ml) , Absolute Alcohol 99% (500 Ml) , Acetic Acid 10% (500 Ml) , Acetic Acid 2% (500 Ml) , Acetic Acid 3% (500 Ml) , Acetic Acid(500 Ml) , Acetone (500 Ml) , Acid ( Hcl) (500 Ml) , Acid ( Hno3) (500 Ml) , Acid (H2so4) (500 Ml) , Acid Fast Stain Chemical Set , Adhesive Silk Tape , Albumin Kit (Bcg Method) 150Ml X 4 Brand- Erba / Coral , Alcohal Based Hand Sanitiser (500 Ml) , Alcohol Based Hand Sanitizer(100 Ml) , Arsenic 100 Ml , Ammonium Hydroxide (500 Ml) , Ammonium Molybdate (100 Ml) , Amonium Sulphate (500 Ml) , Anti Sera A, B & D Set , Antibiotic Zone Scale Per Pc , Applicator Sticks For Use Blood Grouping). Per 100 Pc , Barium Chloride(500 Gram) , Barium Chloride Solution (10Gram/Dl Liter)(500 Ml) , Barium Nitrate (500 Ml) , Beaker (Glass) Volume- 250 Ml , Beaker (Glass) Volume-500 Ml , Beaker (Glass) Volume-1000 Ml , Beaker (Plastic) Volume-500 Ml , Bilrubin Test Kit (Diazo Method) Brand- Erba / Coral , Benedicts Reagent (1000 Ml) , Benzidine Powder (100 Gm) , Big Tips 1000 ?L (Packet) , Biohazard Disposal Bags And Holders , Biomedical Waste Plastic Bags(Large) , Biomedical Waste Plastic Bags(Small) , Biomedical Waste Plastic Bags(Medium) , Brush For Glass Bottle Washing , Burner , Caps , Carbolic Acid Phenoi (500 Ml) , Calcium ( Ocpc Method) 150Ml Kit Brand- Erba / Coral , Carbul Fuschin (500 Ml) , Capillary Glasstube (Per 100 Pcs) , Cellophane , Cholesterol Kit ( Brand - Erba/Coral) , Cidex (Glutaraldehyd) (500 Ml) , Conical Flask Short Neck With Wide Mouth , Copper Sulphate Crystals 100 Gm , Cotton Rolls 400 Gm , Creatinine Kit ( Brand - Erba/Coral) , Culture Bottle , Dead Body Carrying Bags (1 Kg Bundle) , Dead Body Covering Cloth (Cotton) (1 Kg Bundle) , Dead Body Covering Sheet (Plastic) (1 Kg Bundle) , Dead Body Tags , Dextrose (500 Ml) , Disposable Surgical Gown , Disinfect Hand Sanitizer(500 Ml) , Disinfectant Handwash(500 Ml) , Distilled Water (1 Litre) , Esr Filling Bulb (Rubber)(500 Ml) , Ethanol (500 Ml) , Triple Layer Face Mask (10 Pc Pack) , Filter Paper (11 Cm) Ordinary , Filter Paper Whatman No-1 Sheet , Flouride Vial(1000 Ml) , Formaldehyde (500 Ml) , Formalin (500 Ml) , Gram Crystal Violet (500 Ml) , Gram Iodine (500 Ml) , Glass Jars With Cover (Square Shaped) , Glass Measuring Cylinders Per 10 Pcs , Glass Slide (Per Box) , Glucose Kit (God/Pod) Brand- (Erba /Coral) , Glutaraldehyde (500 Ml) , Glucometer Strips Brand- Glu Neo Lite (100 Strips Pack) , Glycerol Per Pcs , Goggles Per Set , Gram Stain Chemical Set , Gross Specimen Jar (Big Size-3 Liters) With Cover And Glass M Seal (500 Ml) , Histopathology/ Snap Top Containers (Plastic) Volume- 500 Gm , Hdl Kit ( Chod Pap Method) Brand- Erba / Coral (300Ml Kit) , Hydrogen Chloride (500 Ml) , Hydrogen Peroxide (500 Ml) , Iodine 100 Ml/Gm , Indole , India Ink (100 Ml) , Iso Propyl Alcohol (1000 Ml) , Lah (500 Ml) , Lancet Disposable(100 Pcs Pack) , Lead Nitrate 100 Ml/Gm , Lead Tetrate 100Ml/Gm , Leishman’S Stain (500 Ml) , Liquid Paraffin (500 Ml) , Liquor Ammonia Solution (500 Ml) , Litmus Blue Paper (Per 10 Pc) , Litmus Red Paper (Per 10 Pc) , Lpcb Reagent (100 Ml) , Lugols Iodine (500 Gm) , Macconkey Agar (500 Gm) , Magnesium Sulphate (500 Gm) , Mannitol Salt Agar Per Pc , Methanol(500 Ml) , Macconkey Agar Powder (500 Gm) , Match Box , Micropipette (1000 Microlitre Fixed) Packet , Micropipette (10-100 Microlitre Fixed) Packet , Micropipette (50-500 Microlitre Fixed) Packet , Micropipette (500-1000 Microlitre Fixed) Packet , Micropipette (10 Microliter Fixed) Packet , Microtips Small (200 Microliter) Packet , Microtips Small (1000 Microliter) Packet , Methyile Blue (500 Ml) , Muller Hinton Agar Powder (Brand Hi Media) (500 Gm) , N/10 Hcl Solution (500 Ml) , Nitric Acid (500 Ml) , Nichrome Wire (Packet) , Normal Saline (500 Ml) , Nichrome Loop Handle , Nichrome Loop Packet , Nutrient Agar Powder (Brand Hi Media) 500 Gm , Oxalic Acid 100 Ml , Paraffin Wax 500Gm , Peptone Water (100 Ml) , Phnyele Lisol Solution (1000 Ml) , Phenol Red Indicator (500 Ml) , Phenophthalein (500 Ml) , Phosphrus 100 Gm , Phosphrus ( Phospomolybdate Uv Method) 150Ml Kit Brand- Erba / Coral , Phosphotungstic Acid Reagentvial , Plain Vial , Plastic Bucket With Lid (100 Pcs Pack) , Plastic Dropper (100 Pcs Pack) , Plastic Dustbins Vol- 25 Litre (Red/Yellow/Blue/Green/White) , Potasium Oxalate(500 Gm) , Potassium Acetate (500 Ml) , Potassium Hydroxide (500 Gm) , Potassium Oxalate(500 Ml) , Potassium Permangnate(100 Gm) , Porcelain Basin , Pricking Needle/ Lancet (Per Pc) , Rectified Sprit (500 Ml) , Rotherl’S Powder Mixture (500 Gm) , Set Of Bone Marrow Needle (A)Kalima Needle – 2 Pieces(B)Salah Needle – 2 Pieces (C) Jamshidhi Needle - 2 Pieces Per Set , Big Tips 1000 ?L (Microtips) (Packet) , Small Tips 200 ?L(Microtips) (Packet) , Shoe Cover , Silver Nitrate (100 Gm) , Simmon Citrate Agar (500 Ml) , Sodium Bicarbonate Solution (500 Gm) , Sodium Carbonate (Brand- Merck) (500 Ml) , Sodium Chloride (Salt) (500 Ml) , Sodium Fluroide (500 Gm) , Sodium Hydroxide (100 Ml) , Sodium Hypobromite(500 Gm) , Sodium Nitroprusside (Brand- Merck) (500 Ml) , Soyabean Powder(500 Gm) , Spinal Needle , Spirit (500 Ml) , Sprit Lamp , Sulphur Powder (500 Ml) , Saframin (Powder) (.01%)(100 Gm) , Swabs(Per 100 Pc) , Syringe 10 Ml(Per 100 Pc) , Syringe 3 Ml(Per 100 Pc) , Syringe 5 Ml(Per 100 Pc) , Tooth Prick(Per 100 Pc) , Tissue Roll , Test Tube 5 Ml(Per 100 Pc) , Test Tube 10 Ml(Per 12 Pc) , Test Tube 15 Ml(Per 12 Pc) , Test Tube Holder , Total Protien ( Biuret Method )Brand- Erba/Coral 300 Ml (Kit) , Thermal Paper For Semiautoanalizer (Bioline) Per Roll , Thymol Crystals , Thymol Tablets , Triaglycerides Kit (Gpo/Pap) Brand- Erba/Coral100 Gm (Kit) , Uric Acid ( Uricase Method) 300 Ml Kit X 4 Brand -Erba / Coral , Urea Agar Base (Christen Sen) , Uri Sticks (Sugar And Protien) Brand- Siemensstrips Box (Per 100 Pc) , Usg Gel 200 Ml , Urograffin 76% 100 Ml , Urea Kit ( Brand- Erba/Coral) , Vacutainer Edta [Purple Cap] , Vacutainer For Pt/Aptt , Vacutainer Plain , Vp Medium , Western Green Esr Pipette (Glass) , Wooden Spatula , Wintrobe Tube , Zinc Oxide 100Ml/Gm , Surgical Bp Blade No- 20 , Surgical Bp Blade No- 21 , Surgical Mask , Glass Adhesive Glue ( Silicone) , Flowable Composite A-1 Shade (Dental Use) , Flowable Composite A-2Shade (Dental Use) , Ethchant For Dental Filling (Dental Use) , Bonding Agent For Composite (Dental Use) , Dental Filling Kit , Croton Tiglium Sees (Jamalgota) 100 Gm , Caster Oil Seed 100 Gm , Rati Seeds 100 Gm , Marking Nut 100 Gm , Capsicum Annum (Chilli) 100 Gm , Dhatura Seeds 100 Gm , Bhang Leaves 100 Gm , Ganja (Weed) 100 Gm , Tobacco100 Gm , Yellow Oleander (Kaner) 100 Gm , Nux Vomica Seed 100 Gm , Poppy Seeds 100 Gm , Big Triangular Bhala Medium Obiong Shaped With Narrow Shoulder Bhala Three Side Plain Bulging Bhala 2. , Two Plain Triangular Bhala , Darobhi (Spaer) , Pain Spear For Snake Killing With Single Pring Medium Size Crocodile Spear With Three Prongs , Dab Cutter, Dom Cutter-Palmyyrrh Leaf Cutting Knife , Gupti , Straight Dagger , Pistol Shaped Dagger , Folding Dagger , Plain Dagger , Sword , Fodder Cutter (Garasy) , Batali , Rukhani , Mouse Briker Charge Heavy , Rampuria (A) Spring Knife , Kukri Without Case , Gandasa , Leather Whip , Hammer (100 Gram) , Hammer (250 Gram) , Hammer (500 Gram) , Hammer (1 Kg) , Sword Stick Of Big Size , Pear With Handle , Thumbi , Ankush , Clasp Knife , Sword Big , Khara Small (Rantha) , Khara Big , Bow & Arrow , Heavy Stone , Heavy Stick , Coir Rope , Razer Blade , A4 Size Paper , Attendece Registar For Student (Class Use) , Register No 2 , Register No 4 , Register No 6 , Register No 8 , Register No 10 , Register No 16 , Permanent Ink Marker Thin (Brand - Faber Castle/Doms/Camlin) , Permanent Ink Marker Thick(Brand - Faber Castle/Doms/Camlin) , Drinking Glass Set Of 6 (Cello/Borosil) , Tea Cup Set Of 6 (Laopala/ Borosil/Cello) , Cellotape Big Size , Key Stand Almirah ( Made Of Stainless Steel 304 With Door & Lock ) Dimensions W X H X D (Cm). 134.9 X 195 X 50.7 Provision Withkey Hanger , Newspaper Stand , Laptop (13Th Gen Intel Core I5-1334U Laptop (16Gb Ddr4, 512Gb Ssd) Anti-Glare, 15.6/39.6Cm, Fhd, Win 11, Ms Office 21, Intel Iris Xe Graphics, 1080P Fhd Camera (Brand - Hp/Lenovo/Dell) , White Board Marker (Blue/Black/Red/Green) Luxor/Flair/Camlin , White Colur Self Adhisive (Tagging) Sticker , Whitener (Correction Pen) Brand- Luxor/Flair/Camlin , Water Purifiers Ro+Uv Minimum 7 Lit Tank With Complete Installation Brand -Kent / Aquagaurd , 0.75 Mm Copper Wire Brand- Finolex/Rr/Polycab/Anchor , 01 Mm Copper Wire Brand- Finolex/Rr/Polycab/Anchor , 1.5 Mm Copper Wire Brand- Finolex/Rr/Polycab/Anchor , 2.5 Mm Copper Wire Brand- Finolex/Rr/Polycab/Anchor , 4 Mm Copper Wire Brand- Finolex/Rr/Polycab/Anchor , Cat6 Heavy Duty Outdoor Cable Weatherproof/Uv Resistant 1000Mbps Ethernet Cable - 305 Meter Bundle Brand-D-Link/Digisol , Rj45 Connector Brand - Orpat/Casio , Calculator 12Digit , Binder Clip 25Mm (Pack Of 12) , Binder Clip 31Mm (Pack Of 12) , Binder Clip 40Mm (Pack Of 12) , Binder Clip 50Mm (Pack Of 12) , 5 Pin Modulersocket (16 Amp) -Brand- Havels/Anchor/Goldmedal , 5 Pin Modulersocket (32 Amp) -Brand- Havels/Anchor/Goldmedal , 5 Pin Socket (10 Amp)- Moduler Brand- Havels/Anchor/Goldmedal , Switch (10Amp)- Moduler Brand- Havels/Anchor/Goldmedal , Switch (16Amp)- Moduler Brand- Havels/Anchor/Goldmedal , Capacitor (3.15 Mf) , Led Bulb- 9 Wbrand -Philips/Havels/Bajaj/Orient , Top 10 Amp (Havels/Anchor/Goldmedal) , Top 8 Amp (Havels/Anchor/Goldmedal) , Switch 6 Amp (Havels/Anchor/Goldmedal) , Switch 10 Amp (Havels/Anchor/Goldmedal) , Modular Swith Board 2 Holder , Modular Swith Board 4 Holder , Modular Swith Board 12 Holder , Ss Combined Box , Mcb 10 Amp , Mcb 6 Amp , Mcb 20 Amp , Pvc Tape , Ceiling Led Light 36 Watt For 2X2 Ceiling Box , Led Tublight 20W Brand -Philips/Havels/Bajaj/Orient , External Led Driver(Bajaj) 36 Watt , Ceiling Fan 1200Mm High Air Delivery, Energy Saving, 100% Pure Copper Motor 2 Year Warranty (Orient/Havells/Usha/Bajaj)| , Home Theatre System Real 5.1Ch Dolby Audio Soundbar For Tv With Subwoofer & Wireless Rear Speakers, 5.1Ch Home Theatre System (600W, Bluetooth & Usb Connectivity, Hdmi & Optical Connectivity, Sound Mode) Brand - Sony/Jbl/Bose , Soundbar Speakers Wireless Rear Speakers, 25W, Bluetooth Connectivity Brand -Sony/Jbl/Bose , Extension Board For 05 Pin Socket 16A (03 Socket & 03 Switch) With 5 Mtr Wire (Hand Made) , Room Air-Purifier For Cleans Upto 150 Sq. Ft. Longest Filter Life Brand - Coway/Philips/Honeywell , Color Laser Printer -Brand - Hp/Canon/Epson , Laser Color Caditage -Brand-Hp/Canon/Epson , Brother Ads-4300N High Speed Network Sheetfed Desktop Scanners Brand -Bother , Multi-Functionlaser Printer (Toner Cartridge), Usb, Wireless, Wifi, A4 Print Speed Up To 34 Ppm (Black) Usb 2.0, Lan, Wifi, Wifi Direct, Brand - Hp/Canon/Epson , Battery 150 Ah Brand - Utl/Amron , Battery 200 Ah Brand - Utl/Amron , Inverter 1275 V Brand - Microtek/Luminous , Inverter 1100 V Brand - Microtek/Luminous , Stablizer For Ac 02 Ton 240 V Brand - Microtek/V-Guard , Ro Water Purifier 50 Liters Per Hours Brand- Kent/Aqua Guard , Smart Tv 32 Inch (Brand- Sony/Lg/Samsung) , Smart Tv 55 Inch (Brand- Sony/Lg/Samsung) , Wall Fan (Orient/Havells/Usha/Bajaj)| , Alluminum Partition (With Acp) Complete Installation , Alluminum Door (With Acp& All Fitting) Complete Installation , Flyleaf Printed Pjmc , Ball Pen (Pentonic/ Cello) , Bathroom Freshener (Godrej /Odonil) , Big Envelope Thread Pasted(A4 Size) , Bucket (Cello) , Copy For Examination 18 Page Rull Paper With Printed Cover , Door Mat (Coconut Rope) , Drawing Pin , Duster (For White Board) , Envelope (Small 11X4Size) , Hand Wash Liquid 1 Litre (Dettol/Savlon/Lifeboy) , Hand Wash Soap 100 Gm (Dettol/Savlon/Lifeboy) , Hdmi Cable , Paper Weight , Pen Stand , Pencil (Doms/Natraj/Apsara , Pencil Bettary (Aa) Everyday / Duracell , Pencil Bettary (Aaa) Everyday / Duracell , Pendrive32 Gb , Plastic Mug , Plastic Scale , Stainless Steel Shoe Stand , Stamp Pad , Stapler Kangaroo (Small) , Stapler Pin Big Size , Stapler Pin Small Size , Table Clock With Time, Date & Temperature , Tag , Tissue Paper , Towel (Small) , Towel Big Size White Colour , Tp Link Usb Wifi Adaptor , U.P.S For Desktop , Usb Hub (3.0 With 04 Usb Port) , Usb Hub 3.0 With 04 Usb Port , Wall Clock Round White Ajanta , Water Bottles , White Board Duster , Badmiton Net , Badminton Pole , Badminton Racket , Shuttle Cock , Led Flood Light 120 Watt , Volley Ball , ( Volley Ball) Net And Pole , Basket Ball , Basket Post , Cricket Bat (With Cover) , Cricket Ball , Legguard , Batting Gloves , Thigh Guard , Abdo Guard , Stump , Helmet , Football , Football Net (One Pair) , Football Air Pump , Ludo Wooden Made With Fine Polish , Chess Wooden Made With Fine Polish , Carrom Wooden Made With Fine Polish , Snooker , Cable Crossover ( Brand -Aerofit / Nordictrack / Precor / Lifefitness) Dimensions Folded: (In) • Length 43? • Width 177? • Height 91? Weight Stack (Ibs): 200 X 2 Sides Frame High Tensile Strength Steel, Continuous Welded, Factory Assembled Weight Frame. Cable 2500 Lbs Heavy Rated Steel Cable With Nylon Coated Tube Rectangular Tubing Pulley Fiber Glass Reinforced Nylon Pulleys With ‘V’ Grooved Channel , Multi Functional Smith Machine ( Brand -Aerofit / Nordictrack / Precor / Lifefitness) 1) Extra Range Of Motion For Functional Cable Cross And Smith Machine . 2) Easy To Fit Leg Press Plate . 3) Upgraded Linear Bearing For Smith Machine Giving A Smoother Travel / Smooth Locking System. 4) Counter Weights On Smith Machine Is To Reduce The Net Weight Of The Barbell. 5) Commercial Grade Pulleys , Cable , Bearing , J Hooks , Safety Arms Etc. 6) Main Frame Is Constructed From 100Mm X 50Mm 11 Gauges Steel Tube . 7) Front Pulley / Power Rack Upright Post Is 80Mm X 40 Mm 304 Grade Stainless Steel Hook . 8) Functional Pulley Slider Smoother And Single Hand Adjustment . 9) J Hook And Safety Arms Have Nylon Strips To Avoid Metal To Metal Contact . , Rower Machine ( Brand -Aerofit / Nordictrack / Precor / Lifefitness) Air Resistance Technology For Highly Effective Workout Which Targets Every Major Muscle Group. • High Strength Nylon Pedal Strap For A Smooth & Quiet Pull. • Resistance: 9 Resistance Level. • Requires 8 X 3-Ft. Space; 2-Piece Design For Storage. • Max. User Weight: 130 Kgs. , Leg Curl/ Extension Dimensions: 62” (L) X 43” (W) X 60” (H) • Tube Gauge: 3.0Mm, With Rectangular Tubing High Tensile Steel. • Rust Proof: Electro Statically Powder Coated. • Weight Stack: 242 Lbs / 110 Kgs , Lat Pulldown & Low Row Dual Function , Inclined Bench Press , Olympic Flat Bench , Pec Fly/Rear Delt ( Brand -Aerofit / Nordictrack / Precor / Lifefitness) Dimensions: 48” (L) X 74” (W) X 60” (H) • Tube Gauge: 3.0Mm, With Rectangular Tubing High Tensile Steel. • Rust Proof: Electro Statically Powder Coated. • Weight Stack: 242 Lbs / 110 Kgs2 Set , Adjustable Bench , Angled Leg Press ( Brand -Aerofit / Nordictrack / Precor / Lifefitness) Dimensions Folded: (In) • Length 84? • Width 65? • Height 53? Frame High Tensile Strength Steel, Continuous Welded, Factory Assembled Weight Frame. Tube Rectangular Tubing , Abdominal Board , Twister Sitting & Standing Dimensions: Length 82? X Width 30? X Height 50? , Heel Raise , Shoulder Press • Dimensions: 72” (L) X 60” (W) X 60” (H) • Tube Gauge: 3.0Mm, With Rectangular Tubing High Tensile Steel. • Rust Proof: Electro Statically Powder Coated. • Weight Stack: 242 Lbs / 110 Kgs , Weight Plates Per Kg Rubber Coated Stainless Steel , Dumbellsper Kg Rubber Coated Stainless Steel , Olympic Inclined Bench , Olympic Bars Stand , Plain Olympic Rod 50 Mm + 150Bl Collars , Zig Zag Olympic Rod50 Mm + 150Bl Collars
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 6
4.
Defence #9667158 AOC
Tender For Augmentation Of Facility At Mid Department At Nd Visakhapatnam; 1 SCHEDULE A PART - I [CIVIL REPAIR WORKS] 2 Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but not exc 4.0 sqm complete all as specified and directed. 3 Demolition of cement concrete [reinforced]of any description and in any position not otherwise specifically provided for and reinforcement cut as required to facilitate demolition, complete all as specified and as directed. Note: Separating of reinforcement will be measured and paid separately under relevant item. 4 Separating, scraping and cleaning of reinforcement complete all as specified and directed. Note: Demolition of concrete measured and paid separately under relevant item. 5 Demolition of cement concrete inground floors andpavings not exceeding 15 cm thickness, complete all as specified and directed. 6 Dismantling floor, hearth or wall tiling including cement mortar bedding including removal serviceable tiles to store and rubbish off the premises to a distance exc. 1.5km but not exc. 5.0km, complete all as specified and as directed. 7 Taking down cement plaster on brick or stone walls etc. including racking out joints hacking for key, scrubbing down with water etc. and rubbish off the premises to a distance exc. 1.5km but not exc. 5.0km, complete all as specified and as directed. 8 Dismantling of wall and ceiling boards (fiber, pulp, insulations, etc.) or insulation boards/slabs/ ceiling of any thickness, including cover fillets and frame, complete all as specified and directed. 9 Removing building materials etc. (other than spoil payable under Earthwork) outside MD land at GVMC designated places exc. 1.5km but not exc. 5km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed. 10 Material and labour for brickwork with Fly Ash Bricks, using old size bricks straight or curved on plan exceeding 6m mean radius, using modular bricks built in Cement Mortar 1:4, complete all as specified and directed. 11 Material and labour for dark shade/double charged/ultra charged vitrified tiles 10mm thick (square/rectangular) polished area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles with and including backing layer of 15 mm thick screed bed in cement mortar 1:4, complete all as specified and directed. 12 Material and labour for dark shade/double charged/ultra charged vitrified tiles 10mm thick (square/rectangular) polished area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm , cut to size required as in dados and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles with and including 10mm thick rendering as backing coat in cement mortar (1:4) for receiving of tiles completeall as specified and directed. 13 Supply and application of epoxy bonding agent - Nitobond EP/Epoxy bonding agent of STP Ltd (Or equivalent ) on the prepared old concrete surface using brush or roller as per manufacturer specification or as directed by Engineer-in-Charge 14 Material and labour for granolithic concrete 1:1:2 floor topping 30mm thick, laid over cement concrete subfloors etc. and finished to the surface even and fair, complete all as specified and as directed. 15 Material and labour for wear proof topping 20mm thick as specified (incorporating an approved metallic floor hardener), as per manufacturer instructions laid on concrete floors and pavings, and finished even and smooth (except metallic hardener), complete all as specified and as directed. 16 Supply only metallic Floor hardener, complete all as specified and as directed. 17 Material and labour for forming Construction joint joints 30mm deep x 10mm wide, filled with sealing compound, grade A, completeall as specified and directed. 18 Material and labour for groove cutting and filling with semi-rigid heavy duety epoxy urethane joint sealant Nitoseal PU280/Shaliseal PU PG 2K (Or Equivalent) having MAF-10%, groove size of 10mm x 10mm, complete all as directed by Engr-in-Charge. 19 Material and labour for non-skid resistant polymer flooring (epoxy self levelling topping for 4mm - Nitoflor SL 4000/Shalifloor SL of STP Ltd) (Or equivalent ), complete all as directed by Engr-in-Charge. 20 Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:4 finished even and fair without using extra cement complete all as specified and as directed. 21 Material and labour for applying two coats of distemper acrylic emulsion paint with and including a coat of wall care putty and priming coat of alkali resistant primer, with and including preparation of newly plastered surfaces, all as per manufacturers instructions, complete all as specified and as directed. 22 Material and labour for complete removal of existing treatment and applying two coats of distemper acrylic emulsion paint with and including a coat of wall care putty and priming coat of alkali resistant primer, with and including preparation of the surfaces, all as per manufacturers instructions, complete all as specified and as directed. 23 Providing & fixingfalse ceiling at all heights with semi perforated 12mm thick micro tegular edgedGRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (Part-4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 1250 grams per sqm including both sides) comprising of main-T runners of size 15 x 32mm of length 3000mm, cross -T of size 15 x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32mm of length 600mm to form grid module of size 600 x 600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasterns, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85 x 25 x 2mm.Galvanised iron perimeter wall angle of size 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws.The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-Charge 24 Supply & fixing aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows and ventilators with one or more rebates of extruded built up standard tubular and other section of approved make, according to IS 1868 (Thickness of powder coating not less than 50 micron) fixed with rawl plugs, screws or fixing with clamps or with expansion hold fasteners including necessary filling up of gaps of junctions at top, bottom and sides with required EPDM / PVC/neoprene gasket etc., aluminium sections should be smooth, rust free, straight mitred and jointed mechanically wherever required including cleat angle, PVC/Neoprene gasket for glazing, panelling, aluminium anodised screws etc. complete all as specified and as directed. 25 Supply & fixing Aluminium Powder coated(minimum thickness of powder coating 50 micron) for doors, windows, ventilators andpartitions (Fixed portions) , tracked windows, sliding doors with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, complete all as specified and directed. 26 Supply & fixing powder coated aluminium door shutters, sections weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing and powder coated aluminium snap beading screws complete all as specified. (thickness of powder coating not less than 50 micron) as per architectural drawings and complete all as specified and directed.Note : Only aluminium shutter for the doors shall be measured in sqm.All the aluminium fittings/fixtures such as butt hinges, tower bolts, handles etc., Pre-laminated particle board and sheet glass shall be measured and paid separately under relevant items 27 Supply & fixing minimum 5.5mm thick sheet glass of ordinary quality of approved brand fixed in position with and including PVC/Neoprene gasket for glazing, glazing clips in doors, windows, partitions etc., as in squares exceeding 0.50 Sqm in each pane etc., with all required accessories, complete all as specified and directed. 28 Supply & fixing 12mm thick pre-laminated particle board, exterior grade, pre-laminated on both sides with decorative choice lamination and fixed in aluminium partitions, doors shutters etc., fixed with and including 12mm thick rubber gasket, aluminium glazing clips, complete all as specified and as directed. 29 Supply & fixing aluminium (die cast body) door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. 30 Supply & fixing brass mortice locks, vertical type 100mm size 4 levers, complete all as specified and as directed. 31 Supply & fixing 150mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed. 32 Supply & fixing floor door stopper with rubber shoe 150/140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed complete all as specified and as directed. 33 SUB TOTAL OF SCHEDULE A PART - I 34 SCHEDULE A PART - II [INTERNAL ELECTRIFICATION] 35 Supply and fixing for Circuit / Sub main wiring with two runs of 4.0 Sqmm PVC FRLSH insulated copper conductor cable, single core multi stranded 1100Volt along with one run of 4.0 Sqmm as earth wire, drawn through and including PVC conduit of suitable size minimum 25mm dia, concealed type, medium grade as per IS 9537 (Part 3-1983) with conduit accessories, complete all as specified and as directed. 36 Supply and fixing of vertical TPN DB suitable for MCCB 125A incomer double door type IP 43 protection sheet metal enclosure 12 ways 36 module, completeall as specified and directed by Engineer-in- charge. 37 Supply and fixing of vertical TPN DB suitable for MCCB 125A incomer double door type IP 43 protection sheet metal enclosure 08 ways 24 module, completeall as specified and directed by Engineer-in- charge. 38 Supply and fix 4 Pole MCCB 125A, 50Hz, 415V, with rupturing capacity 35kA, complete all as specified and as directed by Engineer-in-Charge 39 Supply and fixing 415V 10KA C curve miniature circuit breaker (MCB) of TP 25 to 63 amp and current carrying capacity in the DB complete with connection testing and commissioning, complete all as specified and as directed. 40 Supply and fixing motorised roof air ventilator of size24 capacity 10000cfm MOC:FRP 4mm ,height 22inch, length 2000mm, width 1000mm, both side grill, rpm 960, 230 Volts, No. of blade 6, complete all as specified and as directed by Engineer in Charge. 41 Material & labour for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead 4mm GI wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I, including excavation / earth work in any strata, adequate quantity of charcoal and common salt, PCC chamber with RCC 1:2:4 type B1 40mm thick cover slab with 8mm dia TMT bars @150mm c/c in both ways, suitable handle and angle iron frame of suitable size to fix the cover, with 20mm bore GI pipe light grade for watering with funnel, wire mesh and 15mm bore GI pipe medium grade for GI wire protection and 4mm GI earth wire, including testing after completion, complete all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item. 42 Supply, laying, testing and commissioning of LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts Earthed, grade cross sectional area 25 sq. mm, 4 core with and including cable glands, ferrules and connected accessories laid in trenches or through pipe etc., complete all as specified and as directed. 43 SUB TOTAL OF SCHEDULE A PART - II 44 SCHEDULE A PART - III [EOT CRANE] 45 Dismantling and taking down existing 2.0 ton crane, handed over to user department (necessary receipt voucher to be obtained duly signed and kept on record) and design, fabricate, supply, erect, test and commissioning of 2 Ton Capacity Single girder EOT crane push button and radio remote control system complete with span of 16 Mtrs (approx.), long travel of 50 Mtr and lift hook 12 Mtr from floor level including supply, laying of crane track rail of suitable cross section on existing gantry girder and painting the girder including auxiliary hoist, three phase, electrically operated with connected accessories like rope drum, steel wire rope, sheaves, pulleys, hydraulic thruster brake, single phase preventer, over load relay, SFU, air brake contactor, main hoist motor, micro hoist motor, cross travel motor, long travel motor, lifting hook, service platform, walk way with railing, ladders, buffers, provision safety siren for overload, load indicator, safety hooks/clamps on wall for operation and maintenance of track and DSL systemetc. completeetc. complete all as specified and directed by Engineer-in-Charge including the following :- (a) Design supply, install, test and commissioning DSL system with PVC shrouded copper bus bar for 3 phase and neutral including earth bus system all as specified suitable for 2 TON EOT Crane, complete all as specified and directed. 46 (b) Provision of LT power cable of suitable size from the panel board to crane.(c) Provision of additional push button system with interlocking wiring etc., complete as per OEM specification.(d) Main hoist speed - 3 Mtr/min (g) Main creep speed - 0.3 Mtr/min(e) long travelspeed - 5 Mtr/min(j) Long creep speed - 1 Mtr/min(f) Cross travelspeed- 10 Mtr/min(l) Cross creepspeed - 1 Mtr/minNote:-(i) All the crane/hoists are including gantry rails of suitable size DSL system with PVC shrouded copper bus bar etc. complete.(ii) All micro speed will be 1/10 of main speed by all motions.(iii) Audio visual alarm to provide to all motions, single phase preventer, over load relay, safety siren/overload alarm and ladder from floor level.(iv) All cranes & hoist shall confirm to IS 807 & IS 3177.(v) The bidder have to visit the site before quoting the tender please 47 SUB TOTAL OF SCHEDULE A PART - III 48 SCHEDULE A PART - IV [FIRE DETECTION SYSTEM] 49 Supply and fixing of Touch Screen loop Expandable up to 9 Loops addressable fire alarm panel, Panel with Sensor status indications: - Sensor status is indicated by the different colors: Color Device conditions for clean detector, Medium clean Detector, Sensor almost dirty. Dirty. 1-3 loop formats expandable upto 9 loops, upto 1000 fire detection zones 200 per panel. True peer-to-peer networking Supports intelligent/ programmable remote terminals, BMS interface. Which consists of backlit display 480 x 272 TFT 4.3”menu driven graphical touch screen IP Gateway and I/O Drivers Auto learn and Loop detection 1000 event log entries. Simplified logic delivers click and go configuration. Approved to EN54 parts 2 and 4. Quick start and protect-A working system after an auto learn is performed. Optional Peripheral expansion card UP to 254 devices per loop (Protocol dependent). Up to 188,800 devices per network. Networkable up to 200 nodes. Circuit monitoring of local panel circuits. Simple Select & Click programming. Single area false alarm management. Compatible with to given makes. Single area false alarm management facility provision of CMS / Ad-Net Software-to monitor & control the status of the FACP from the windows based system- with Visual & Sound alerts for the fire and fault condition-with 1-3 Loop formats expandable up to 9 loops. Up to 1000 fire detection zones 200 per panel completeetc., complete all as specified and directed by Engineer-in-Charge. 50 Supply and fixing addressable intelligent touch screen type fire alarm repeater panel with graphic display touch screen (480x272 TFT 4.3) 14 LED front. 2 RS 485 for connection completeetc. complete all as specified and directed by Engineer-in-Charge. 51 Supply and fixing addressable type manual call point resettable type for indoors and out doors with Fire indication completeetc. complete all as specified and directed by Engineer-in-Charge 52 Supply and fixing addressable type loop sounders alongwith inbuilt isolator completeetc. complete all as specified and directed by Engineer-in-Charge. 53 Supply and fixing addressable type loop Open Area sounders alongwith inbuilt isolator complete all as specified and directed by Engineer-in-Charge. 54 Supply and fixing 2 core x 1.5 sqmm copper armoured cable nominal cross section area FRLS PVC insulated unsheathed cable with copperconductor, multi stranded 1100 V as per IS: 1554 including wall mounting/ceiling mounting with saddles clamps screws junction boxes and required necessary earthing etc. complete all as specified and as directed by Engineer-in-charge. 55 Supply and fixing 19mm dia rigid PVC conduit complete all as directed complete all as specified and directed by Engineer-in-Charge. 56 Supply and fixing multi type multi sensor (smoke detectors/heat detectors) and IR/UV/Flame detectors as required and to be installed as per IS specifications, complete all as specified and as directed. 57 SUB TOTAL OF SCHEDULE A PART - IV 58 SCHEDULE A PART - V [AIR CONDITIONING & REFRIGERATION] 59 Supply and install hi wall split inverter units indoor/outdoor complete with cordless remote control unit and with in built air ioniser copper coil and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 2.0 TR, 230 volt, 50 Hz, single phase; including accessories nuts bolts and brackets, complete all as specified and as directed.Note : AC drain pipe from AC indoor unit to the ground level to be incorporated in the quoted rate. 60 Supply and install voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 Volts to 250 V with output voltage stabilised at 230 V with accuracy of + 2.5% and of capacity 5 KVAincluding all accessories complete all as specified and as directed by Engineer-in-Charge. 61 Supply and fixing of single pole and neutral metal clad enclosure with 2 pin and earth plug and socket complete with one single Pole MCB of capacity 20 Amps, 240V complete all as specified and as directed by Engineer-in-charge. 62 SUB TOTAL OF SCHEDULE A PART - V 63 SCHEDULE A PART - VI [EXTERNAL FIRE FIGHTING SYSTEM] 64 Supply, lay in ducts, jetty gallery connect, test and commissioningductile Iron pressure pipe of size 150mm dia with both sides flanged and conforming to IS-8329 : 2000 in standard maximum lengths, class K-9, flange rating PN-10, fixing and lining inside with cement mortar (CML) outside with bituminous coating as per Annx `C of IS-8329 including taking down existing pipe, complete all as specified and as directed by Engineer-in-Charge. 1. Necessary fittings will be measured and paid separately as Supply only. 65 Supply only DI Specials such as Bends , tapers any type, Tee pieces, single branch, Y junction, double branch, cross, collars, caps and plugs for connecting up to 400mm bore DI Pipe all as per IS:9523, complete all as specified and as directed. Note: Fittings shall be conforming to IS 9523:2000. 66 Supply and fixing in repair Single Headed Fire Hydrant Landing Valve of Type A of size 63 mm dia confirming to IS-5290 including all Joints and Jointing Material complete all as specified and as directed. 67 Material & labour for hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard complete all as specified and directed by Engineer-in-Charge. 68 Material & labour for fire hose of synthetic fiber 15 mtrs, 63mm dia as per IS 903 with IS Mark including gun metal coupling (Male and female parts), complete all as specified and as directed. 69 Supply & fix in repair fire hydrant stand posts 80mm dia 1.5 mtr height with provision of single outlet confirming to IS 908 complete all as specified and directed by Engineer-in-Charge. 70 Cutting existing CI/DI/MS Pipe line 150 mm dia & reducing to required length before laying including insertion of new tees, branches etc. for connecting of suitable size, complete all as specified and directed. 71 Supply and fixing of sluice valve, flanged of class PN 1.6 of size 150 mm dia including steel spindle with head, iron wheel, gland with gland packing, etc. and necessary fixing arrangement likerubber gasket etc., complete all as specified and as directed by Engineer-in-charge. 72 Supply, installation, testing and commissioning in repairof 150mm dia 2 way fire brigade inlets with isolation valve with instantaneous SS coupling, 63mm dia with required fittings, complete all as specified and directed by Engr-in-Charge. 73 Material & labour for Valve chamber of size 1500mm x 1500mm x 1200mm internal dimensions, with and including excavation in any type of soil, spreading, levelling and refilling etc. PCC (1:4:8) type D2 for foundation, Fly ash brick work of one brick thick wall in CM (1:4) including internal plaster 15mm thick in CM (1:4) external plaster 15mm thick(1:4) upto 150mm below GL and providing coping in PCC (1;2:4) type B1, angular iron frame of size 50x50x6mm with 6mm thick MS plate cover complete including locking arrangements and having FRP coating of 2mm thick on both inside and outside surfaces all as shown in TD drawing and complete all as specified and as directed by Engineer-in-Charge. 74 Supply and fix CO2 stored pressure type, fire extinguishers -9.0 Kg capacity complete with initial charge, gun metal cap, discharge hose with AB horn, nozzle, wall fixing brackets etc. confirming to IS : 15683 with ISI mark complete all as specified and as directed by Engineer-in-Charge. 75 Supply and fix light weight screw grip type CO2 fire extinguishers -4.5 Kg capacity complete with initial charge, gun metal cap, discharge hose with AB horn, nozzle, wall fixing brackets etc. confirming to IS : 15683 with ISI mark complete all as specified and as directed by Engineer-in-Charge. 76 Supply and fix dry chemical powder stored pressure type - 9 Kg capacity complete with initial charge, fund metal cap, discharge hose with nozzle wall fixing brackets etc. confirming to IS:15683 with ISI mark complete all as specified and as directed by Engineer-in-Charge. 77 Material & labour for fabrication and erection of fire stand of suitable size made out of angle iron/channel and painting with two coats of post office red colour synthetic enamel paint over a coat of red oxide primer and lettering with white paint including galvanised MS fire bucket- 03 Nos, 5 litre capacity, complete all as specified and as directed by Engineer-in-Charge. 78 SUB TOTAL OF SCHEDULE A PART - VI 79 Total Amount in Figures 80 Quoted Amount in Words
Contract Date: Apr 27, 2026 Contract Value : 2.16 Crore
Statutory Bodies & Commissions/Committees No of Bidders 8
Andhra Pradesh View Result →
5.
Drinking Water Supply and Sanitation #9513897 Technical Bid
Tender for Kalpi Npp Water Supply Scheme District Jalaun Construction Of Intake Footbridge Wtp Oht Rising Main Distribution System And Electrical Mechanical Works Under Kalpi Npp Water Supply Scheme District Jalaun - W.T.P -Design (hydraulic and structural ), construction, (including topographical survey, geotechnical investigation and other Surveys as required) for specified capacity of WTP based on 20 Hrs. operation including inlet chamber, aeration fountain / cascade, inlet channels ,chemical building ,including mechanical/manual fine/coarse screens, flash mixer, mixing channel with Parshall flume and flow measuring arrangement, clariflocculator with conventional, filter house and filter plant including back wash tank and back wash pumps with 100% standby, chemical house, coagulant feed tank with feed mechanism, poly aluminium chloride (PAC) or other coagulant tank of specified capacity and nos. with mixing and dosing arrangement complete, vacuum feed gas chlorinator with 100% standby ,safety equipment’s &EOTcrane,pressureandleveltransmitterfor pumpingplant,turbidity, TDS, PHAnalyzer,chlorineanalyzer,ROFTandLOHTforfilter house,flowtransmitterultrasonic/electromagneticatinletandoutletandFilter backwashwithentirepipingsystem , sludge handling unit and recycling of collected water from sludge , etc. complete to achieve desired perameters of clear wateras specified in tender document andin accordace letest C.P.H.E.E.O.Manual,/ltest guidline/ I.S. Codes/Govtt. Orders . All WTP scada Opratedexternal and internal electrification, laboratory building with all specified lab equipment, admin building,Sub station building (L.T./H.T. Room), Platform for Transformer,Meter Room ,chlorine Room,Staff Quarter (Type III-one Number), sanitary block with necessary water supply and drainage arrangement, campus roads (Interlocking Road/C.C.Road), landscaping( earth filling up to 115.00level including levelling and dressing of Campus )and other campus development works with rain water harvesting and garden, etc. all required works complete as per the direction of Engineer-in-Charge in Pile Foundation .The WTP shall be fully automatic prefrablybased onRapid sand gravity filter or any proven technologysuitable to treat Raw water from yamuna river throug out the year , PLC/SCADA with real time remote monitoring system and online contineuous effluent monitoring systemincluding Soil testing, Design ,S/o all labour ,material T&P etc. required for proper completion of the work as per letest IS Codes ,manuals ,instruction of engineer in charge and tender document. 2 INTAKE WELL- Supply of all materials, labour, T&P etc.as requiredforDesign and construction of Intake- well - cum - pump house of 9.0 m. internal dia. The intake well upto floor level shallbe firmly based on suitable foundation made with well sinking tecgnology including construction of coffer damand Annular raft/ well foundation , including construction of 1.20 m. wide R.C.C. balcony at plinth level, construction of Pump House made of brick masonry, duly embraced within R.C.C. column, and fitting of doors and windows, making opening arrangement at floor level of pump house (9.00 m. dia and 6 m. height)and construction of 1.20 m. wide R.C.C. balcony at Pump house floor levelincluding S.S. Rolling Shutter, steel cage hinged with locking arrangement, duly supported on steel girder. Plateform for transformer ,meter room andSubstation Building (HT pannel room,LT pannel room ) Ventilator arrangement along with fixing of required size dia. DID/F pipesand Sluice Valves- 3 Noat inlet etc. as per site requirement or as per the design. The work also includes steelrailing(grad 304 ) in three rows on both sides of pump house balcony and fixing of 0.5m. wide M.S. ladder made of 50 x 50x 6mm. angle iron ladder from floor of pump house to floor of intake well, duly supported on R.C.C.landing at suitable interval. The ladder shall run spirally inside the intake well and each landing shall be supported on R.C.C. M.S. channelpost, spaced not more than 1.5 m. interval including Construction of R.C.C. foundation block as required also include provision for dismantling and reinstatement of stone pitching,removal earth of Coffer dam to maintain flow through-out the year ,Approch roadup to Approch bridge etc up to completion of work as per insrtuction of engineer in charge and tender document . 3 The floor of pump house & balcony shall be of Kota Stone etc. complete. Frames for doors / Shutter shall be made of 50x50x5 mm. M.S. angle iron and ionized and shall be partly panelled and glazed, made of suitable steel sections, conforming to relevant BIS. The work also includes painting of all concrete surfaces with three coats of approved paint and painting of pipes, doors, windows with anticorrosive paints including design of intake well, foot bridge, pump house etc. considering seismic and other forces as per relevant BIS requirements. 4 Design and construction of 4.0 mts. wide R.C.C Foot bridge from Intake well to bank of river for length of 350 mtsminimum height of foot over bridgeslab should be equal to level of floor level of Pump House. pier of bridge in well shinking foundation minimum two Beam below deck slab with bearing support. Provision for padestal construction to rising main pipe fixing with anchor Clamping ,casing pipe for electric cables . Also including Supply& fixing ofstainless steel (gread 304) railing both sides of foot bridge , floor shall be plain chequered tiles, Statinless steel gate at entry gate of Approch bridge with locking arrangmentsup to completion of work as per insrtuction of engineer in charge and tender document . 5 Construction of R.C.C Over Head Tank (OHT)Supply of all the materials, labour T&P and construction of a R.C.C. Over head tank above ground level with main components, based on IS-3370 and IS 11682 or liquid storage concrete in over head tank and foundation concrete as per specification in I.S. 2911.Following capacity/StagingAll Components of OHT will be casted in M-30 concrete with cement, coarse sand and approved stone grit asI.S. 456.Minimum depth of founditation below original ground level will be 2.0 M and in pile Foundation .Seismic effects and wind load should be taken into consideration as I.S. 1893for earthquake resistance and I.S. 875 part-III for wind load on structure. The asumed bearing capacity of soil has been taken as 8 M.T. sqm.1m wide RCC stair case from ground lavel to balcony.M.S. ladder made of 50 X 50 X 6 mm angle section and 20 mm plain M.S. bars (specification of M.S. should be as per IS 800-2007) with hand rails of 20 mm medium class G.I. pipes on both sides in three rows from balcony to top dome resting on an RCC plateform (75 X 75 cm and 10 cm thick) projecting from top ring beam and one alluminium ladder inside the tank body (from manhole to tope domto bootom dome). 6 1 m wide R.C.C. balcony around the tank at the junction point of vertical wall and conical wall.Proper R.C.C. railing and 20 mm dia medium class G.I. pipe (in 3 rows) on both sides of stair case, arround the balcony at each landing from landing with top ring beam upto manhole on the top dome and at the periphery. The G.I. pipes will be supported on R.C.C. postsof 100 mm dia or on the posts made of 50 X 50 X 6 mm M.S. angle section, spaced at intervals not more than 1.5 m.Proper ventilator at top dome in circular shape of 1.2 m dia along with an R.C.C. cover of minimum 1.50 m dia and 7.5 cm thickness, pillar of vintilator should be minimum 50 cm dia. The space between top dome and R.C.C. cover should be covered with mosquito net of standered qualitity along with expended mentaled jail.Electro Megnatic Flow Meter.Lightening conductor as per I.S.S. 2309 of its latest amendments of latest electricity rules. It should consistproper elevation rod with 5 or more fork points proper down conductors of prescribed mental of proper size prescribed by ISS 2309-1969 and ISS 3013-1966.D.I. manhole of min 60 X 60 cm size made of M.S. channel section with adequate cover made of M.S. sheet of minimum 3mm thickness hinged with manhole with locking arrangment. This manhole should be fixe at top dome at proper place.including soil testing from govt institute as per tender document andrelevent IS codes. 7 Zone -1 1300KL/22M 8 Zone -21100KL/25M 9 Zone -3 2400KL/22M 10 Zone -4 300KL/25M 11 CONSTRUCTION OF R.C.C CLEAR WATER RESERVIOUR (C.W.R) CUM PUMP HOUSE OF VARIOUS AT DIFFERENT SITE Design & supply of allmaterial T&P etc and constructRCC CWR cum pump house offollowing capacity with HT, L.T and meter room, GI pipes railling consisting of 3 rows of 20 mm dia G.I pipe and angle iron posts of the dome periphery, S.S ladder from ground level to top of tank and inside the tank, locking device, ventilator, supply and fixing digital level indicator, 25mm PCC 1:2:4 over 80mm PCC 1:4:8 in apron, 150 mm semicircular drain around the tank, two coats of apex paint and testing of tank for water tightness etc. and also including the cost of supply and fixing of all necessary pipes and valves etc all complete as per approved design and drawing.including soil testing from govt institute as per tender document andrelevent IS codes. 12 1200kl (MCWR) 13 Demolition of R.C.C Over Head Tank (OHT)Dismantling of ESRs of various capacities and heights using crane (10 MT capacity) and handing over M.S./ C.I./G.I. pipes, valves, bends, etc. to the Department. However taking steel reinforcement by the dismantling agency and other defung buildings like staff quarters, damaged pump house including removing dismantled materials from site and disposing them at suitable place as directed, etc. complete.Capacity of E.S.R. upto 2 lakh litres and staging upto 12 M heightZone -1 500KL/12M 14 Zone -2 -400KL/12M 15 Raw Water Rising Mains From Intake To WTPExcavation for pipe line in ordinary soil (loam, clay, sand) with lift up to 1.5 m and lead up to 50 m and including filling back, watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth within 50 meters. 16 500 mm DI K-7(yamuna river to WTP) 17 Supply of ISI mark DI K-7 S&S pipes (push on joints) with supply of allDI specials of following class and diameters inclusive of jointing material (Rubber gasket of EPDM Quality IS 12820 / 1989) conforming to IS 8329/2000 for its latest ammendment F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection chacking and forwarding charges, transit insurance charges, road transportation charges, unloading & stacking the same etc. complete 18 500 mm DI K-7(yamuna river to WTP) 19 Lowering, laying and jointing with ruber gasketsD.I. K-7/ D.I. K-9 of various classes with DI / MS specials of following diameter in proper position also fixing of pipe on foot over bridge, grade and alignment including conveyance of material to site of work. It also includes cost of jointing materials and rubber rings labour,hydraulic testing etc. complete. 20 500 mm DI K-7(yamuna river to WTP) 21 Supply of following type of valves as per specifications F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection charges, packing and forwarding charges, transit insurance charges, road transportation charges, unloading & stacking the same etc. complete. 22 Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000 - 500 mm 23 -Air valves as per IS 14845 : 2000-100 mm 24 Carting, lowering, laying, aligning, fixing in position and installation of following valves in pipe line including all material, labour, testing and commissioning as per direction of Engineer-in- charge. 25 Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000 - 500 mm 26 Kinetic Double Air Valves-Air valves as per IS 14845 : 2000-100 mm 27 R.C.C. Thrust block with cement, core sand, and 20mm gauges stone ballast in propotion of 1: 1.5:3 in thrust block of pipe line including reinforcementand its bending the same with 0.08 mm thick binding wire in position and necessary shuttring including proper curing and supply of all materials, labour and T&P etc required for proper completion of work. 28 Providing reinforcementincluding cutting bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete (including cost of binding wire and MS Bar) 29 Supply of all materials, labour, T&P etc. required for construction of following masonry type chambers as per type design. 30 Sluice valve Chamber 500mm 31 Air valve Chambers -Air valves as per IS 14845 : 2000-100 mm 32 Rising MainsSupply of ISI mark DI K-7/K-9 S&S pipes (push on joints) of following with D.I. specials and diameters inclusive of jointing material (Rubber gasket of EPDM Quality IS 12820 / 1989) conforming to IS 8329/2000 for its latest ammendment F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection chacking and forwarding charges, transit insurance charges, road transportation charges, unloading & stacking the same etc. complete 33 125 D.I K-9 34 200 D.I K-9 35 350 D.I K-9 36 400 D.I K-9 37 Excavation for pipe line in ordinary soil (loam, clay, sand) with lift up to 1.5 m and lead up to 50 m and including filling back, watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth within 50 meters.0 to 1.5 m depth 38 Lowering, laying and jointing with SBR ruber gasketsD.I. K-7/ D.I. K-9 of various classes with DI / MS specials of following diameter in proper position, grade and alignment including conveyance of material to site of work. It also includes cost of jointing materials and rubber rings labour,hydraulic testing etc. complete. 39 125 D.I K-9 40 200 D.I K-9 41 350 D.I K-9 42 400 D.I K-9 43 Supply of following type ofDI valves as per specifications F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection charges, packing and forwarding charges, transit insurance charges, road transportation charges, unloading & stacking the same etc. completeDouble flanged Ductile Iron Sluice valves as per IS 14840 : 2000./Air valves as per IS 14845 : 2000 including Sluice valve of Isolation 44 125 mm D.I D.F. 45 200 mm D.I D.F. 46 350mm D.I D.F. 47 400 mm D.I D.F. 48 25 mm D.I D.F. 49 50 mm D.I D.F. 50 80 mm D.I D.F. 51 Carting, lowering, laying, aligning, fixing in position and installation of following valves in pipe line including all material, labour, testing and commissioning as per direction of Engineer-in- charge.Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000 /Air valves as per IS 14845 : 2000 52 125 mm D.I D.F. 53 200 mm D.I D.F. 54 350mm D.I D.F. 55 400 mm D.I D.F. 56 25 mm D.I D.F. 57 50 mm D.I D.F. 58 80 mm D.I D.F. 59 Supply of all materials, labour, T&P etc. required for construction of following masonry type chambers as per type design. 60 Sluice valve Chamber (MASONRY TYPE) 61 Air Valve Chamber 62 R.C.C. Thrust block with cement, core sand, and 20mm gauges stone ballast in propotion of 1: 1.5:3 in thrust block of pipe line including reinforcementand its bending the same with 0.08 mm thick binding wire in position and necessary shuttring including proper curing and supply of all materials, labour and T&P etc required for proper completion of work. 63 MS work in plain RCC incluiding bending supply wastage overlaping etc complete 64 Provision for crossing of Nalas/culvert for laying of pipe line usingsuitable dia. and length 0.60 m more than the outer width of nala, labour, T&P, necessary arrangement for diversion & pumping of water if required, barricading etc required for proper completion of work as per directions of engineer-in-charge.(up to 3.50m wide) 65 NHAI crossing by trenchless technologyProviding and laying of 700 mm dia MS casing pipe 12 mm thick by trenchless technology under railway track with outside PU coating of 1000 micron and inside PU Coating of 500 micron alongwith Providing & Laying of Carrier pipe of dia 400 mm, 8.0 mm thick with outside PU coating of 1000 micron & inside PU Coatingof 500 micron including, providing and fixing of speed restriction caution board as per railway norms and 80 mm. dia GI drain and vent pipe, Providing and fixing the end seal on both ends to plug the annular space between casing and carrier pipe & under ground probe radar survey to check any underground abstruction before finalizing the alignment and to take precautionary measures from power supply distribution. 66 Railway crossing by trenchless technologyProviding and laying of 250 mm dia MS casing pipe 12 mm thick by trenchless technology under railway track with outside PU coating of 1000 micron and inside PU Coating of 500 micron alongwith Providing & Laying of Carrier pipe of dia 125 mm, 8.0 mm thick with outside PU coating of 1000 micron & inside PU Coatingof 500 micron including, providing and fixing of speed restriction caution board as per railway norms and 80 mm. dia GI drain and vent pipe, Providing and fixing the end seal on both ends to plug the annular space between casing and carrier pipe & under ground probe radar survey to check any underground abstruction before finalizing the alignment and to take precautionary measures from power supply. 67 Dismantling of following type of road surfaces for laying of pipe line n work including sorting out of serviceable materials and disposal of unserviceable materials. 68 Bituminious Road 69 Cement Concrete Road 70 Re-instatement of following type of road surfaces after laying of pipe linework including supply of all materials, labour, T&P etc. requuired for proper completion of the work as per direction of engineer-in-charge. The quantity of re-instatement has been increased by thirty percent in the view of additional damaged of dismantled road due to traffic / vehicle movement. 71 Bituminious Road 72 Cement Concrete Road 73 Distribution Network .Supply of ISI Marked or its relevant code HDPE Pipes and Electrofusion specialsof follwing sizes (Dia in mm) with jointing materials, specials of sizes required during constructionas per latest I.S.Samandement upto site of work included loading unloading cartage insurance, etc all completed but exclusive of GST in various zone as per the drawing and approval to Engineer 74 HDPE PIPE GRADE PE 100/ PN 6- 90 mm 75 HDPE PIPE GRADE PE 100/ PN 6- 110 mm 76 HDPE PIPE GRADE PE 100/ PN 6- 140 mm 77 HDPE PIPE GRADE PE 100/ PN 6- 160 mm 78 Supply of ISI Marked or its relevant code DI K-7 Pipes and Specials of follwing sizes (Dia in mm) with jointing materials, during construction as per latest I.S amendement upto site of work included loading, unloading, cartage insurance, etc all completed but exclusive of GST in various zone as per the drawing and approval to Engineer 79 D.I. K-7/ 200 mm 80 D.I. K-7/ 250 mm 81 D.I. K-7/ 300 mm 82 D.I. K-7/ 350 mm 83 D.I. K-7/ 400 mm 84 D.I. K-7/ 450 mm 85 Supply of following size ofSluice Valves/ Scour Valves,capable for working pressure of 10 kg/cm2 Fire hydrants & Air Valves as per relerelavent I.S.I or its latest amandement. Up to store Including loading, unloading & cartage, taxes duties insurance etc all complete. As per IS: 2906-1969. /Air Valve as per as I.S : 14845D.I. D/F Sluice valve/ Scour valve 86 25 mm. dia DI D/F 87 50 mm. dia DI D/F 88 100 mm. dia DI D/F 89 150 mm. dia DI D/F 90 200 mm. dia DI D/F 91 250 mm. dia DI D/F 92 350mm. dia DI D/F 93 Fire hydrant (80 mm dia.) 94 Excavation for pipe line trenches in Ordinary soil requiring use ofspecialT&P etc. with lift upto 1.5 m lead upto 50 mincluding filling back of excavated earth into trenches and watering ranmming dressing and removal of surpluas earth upto 50.m including supply of alllabour T&P etc complete and as per direction of engineer incharge. 95 Cartage fromstore to site of work for following size (dia in mm)HDPE pipes andElecrofusion Specialsand lowering the same into trenches and laying true to alignment and gradiant including testing of pipe lines cuttings of pipes for making up the length and making joints with electrofusion couplers, bands, tees, endcap etc. with electrofusion machinery including all jointing materials, labour, T&P etc required for proper completion of work. (excluding cost of trenching) 96 HDPE PIPE GRADE PE 100/ PN 6- 90 mm 97 HDPE PIPE GRADE PE 100/ PN 6- 110 mm 98 HDPE PIPE GRADE PE 100/ PN 6- 140 mm 99 HDPE PIPE GRADE PE 100/ PN 6- 160 mm 100 Cartage of DI K-7 pipes and specials of following size (dia in mm) , lowering them into trenches and laying true to alignment and gradiant including testing of pipe line but excluding cost of trenching including all supply of Labour T&P etc complete required for proper completion of work. 101 D.I. K-7/ 200 mm 102 D.I. K-7/ 250 mm 103 D.I. K-7/ 300 mm 104 D.I. K-7/ 350 mm 105 D.I. K-7/ 400 mm 106 D.I. K-7/ 450 mm 107 Carting of following size of Sluice Valves/ Scour Valves Fire hydrants & Air Valves from store to site of work and lowering them into the trenches, fixing in position and jointing them with Pipe line and testing etc including supply of jointing materialand also including supply of all material and construction of suitable P.C.C Support below fittings etc. complete.D.I. D/F Sluice valve/ Scour valve/ air valve 108 25mm dia 109 50 mm dia 110 100 mm dia. 111 150 mm dia. 112 200 mm dia. 113 250 mm dia. 114 350 mm dia. 115 Fire hydrant (80 mm dia.) 116 R.C.C. Thrust block with cement, core sand, and 20mm gauges stone ballast in propotion of 1: 1.5:3 in thrust block of pipe line including reinforcementand its bending the same with 0.08 mm thick binding wire in position and necessary shuttring including proper curing and supply of all materials, labour and T&P etc required for proper completion of work. 117 Thrust Block 118 Supply of all matarial labour T&P etc and constuction of following type of chamber as per type design & drawing & as per diretion of engineer incharge . 119 Sluice valve chamber 120 Scour Valve Chamber 121 Air Valve chamber 122 Fire hydrant chamber 123 Flow Meter chamber 124 Provision for Nala/ Culvert crossing including all materials, labour and T&P etc. complete. It includes supply of D.I. pipe of necessary size for encasing, cement concrete and Brickwork for pillars and any other job for proper completion of work. 125 For crossing ofnalla/culvert upto 3.5 m wide(90mm dia to 110mm dia ) 126 For crossing ofRoad upto3.5 m wide(90mm to 110mm ) 127 For crossing ofRoad upto7.0. m wide(90mm to 110mm) 128 Dismantling of following types of roads including sorting out of servicable matarials stacking and disposal of unservicable matarials with in a distance of 50 m. including supply of labour specials T&P etc. required for proper completion of work 129 Interlocking tile 130 C.C Road 131 Bituminous Road 132 B.O.E Road 133 Reinstatement of following types of roads including sorting out of servicable matarials stacking and disposal of unservicable matarials with in a distance of 50 m. including supply of required new matarials & reinstatement the same includng supply of labour T&P etc. required for proper completion of work. 134 Interlocking tile 135 C.C Road 136 Bitumenous Road 137 B.O.E Road 138 NEW HOUSE CONNECTIONMaking House Connectionwith Distribution main with elecrofusion saddle and fittings ,brass ferrule and Tap ,HDPE /GI pipe , including Reinstatement of road after Dismantling of road , supply, cartingofspecialsloweringtheminto trenches , fixing them including bailing out of water necessary excavation for connection including all labour , T&P etc. required for proper completion of the work as per instruction of engineer in charge and tender document. 139 In C.C. Roads 140 For 90 mm to 110mm dia 141 For 125 mm to 160 mm dia 142 For 200 mm to 250 mm dia 143 For 300 mm to 350mm dia 144 For 400 mm to 500mm dia 145 In Bitumenous Roads 146 For 90 mm to 110mm dia 147 For 125 mm to 160 mm dia 148 For 200 mm to 250 mm dia 149 For 300 mm to 350mm dia 150 For 400 mm to 500mm dia 151 In B.O.E. Roads 152 For 90 mm to 110mm dia 153 For 125 mm to 160 mm dia 154 For 200 mm to 250 mm dia 155 In C.C. Interlocking Tiles Roads 156 For 90 mm to 110mm dia 157 For 125 mm to 160 mm dia 158 For 200 mm to 250 mm dia 159 For 300 mm to 350mm dia 160 For 400 mm to 500mm dia 161 In Kacha Roads 162 For 90 mm to 110mm dia 163 For 125 mm to 160 mm dia 164 For 200 mm to 250 mm dia 165 For 300 mm to 350mm dia 166 SHIFTING OF HOUSE CONNECTIONMaking House Connection with Distribution mainwith elecrofusion saddle and fittings ,brass ferrule and Tap ,HDPE /GI pipe ,including Reinstatement of road after Dismantling of road , supply, cartingofspecialsloweringtheminto trenches ,fixing them including bailing out of water necessary excavation for connection including all labour , T&P etc. required for proper completion of the work as per instruction of engineer in charge and tender document. 167 In C.C. Roads 168 For 90 mm to 110mm dia 169 For 125 mm to 160 mm dia 170 For 200 mm to 250 mm dia 171 For 300 mm to 350mm dia 172 For 400 mm to 500mm dia 173 In Bitumenous Roads 174 For 90 mm to 110mm dia 175 For 125 mm to 160 mm dia 176 For 200 mm to 250 mm dia 177 For 300 mm to 350mm dia 178 For 400 mm to 500mm dia 179 In B.O.E. Roads 180 For 90 mm to 110mm dia 181 For 125 mm to 160 mm dia 182 For 200 mm to 250 mm dia 183 In C.C. Interlocking Tiles Roads 184 For 90 mm to 110mm dia 185 For 125 mm to 160 mm dia 186 For 200 mm to 250 mm dia 187 For 300 mm to 350mm dia 188 For 400 mm to 500mm dia 189 In Kacha Roads 190 For 90 mm to 110mm dia 191 For 125 mm to 160 mm dia 192 For 200 mm to 250 mm dia 193 For 300 mm to 350mm dia 194 Building worksSupply of all materials, labour, T& P, complete and construnction of a Half set of One No.Single Roomed staff quarters for Operator staff, pump operator, chaukidaar, pump attendent and other as per approved design in pile Foundation. 195 Zone-1 196 Zone-2 197 Zone-3 198 Zone-4 199 At wtp campus 200 Supply of all materials, labour, T& P, complete and construnction other as per approved design in pile Foundation.For Construction of general resedential staff quarters(type-II) 1nos of 2 half set of area 57.70sqm. 201 Supply of all materials, labour, T& P, complete and construnction other as per approved design in pile Foundation for Construction of following type of ancliary buildings Master Control Room(5x4.5x4m) 202 Construnction of Boundary Wall including supply all materials, labour, T&P etc required for proper completion of work as per Approved design in pile foundation. 203 Water Campus Zone 1 204 Water Campus Zone 2 205 Water Campus Zone 3 206 Water Campus Zone 4 207 AT wtp campus 208 Supply and fixing 3.60 M & 1.20 M wide MS Gate with pillars including fabrication and supply of steel and construnction ofboundary pillars etc complete. 209 Provide all materials, labour, T&P etc Required for proper completion of work and construct Interlocking Tiles approach road, laid dry and joints intact with coarse sand mortar including preparation of base etc 210 Water Campus Zone 1 211 Water Campus Zone 2 212 Water Campus Zone 3 213 Water Campus Zone 4 214 Construnction of Drain in Water works Campus30 x 30 cm including labour material and t&p all complete 215 Zone-1 216 Zone-2 217 Zone-3 218 Zone-4 219 Filling of earth of lower portion including levelling and dressing at water works 220 E&M works 221 RAW WATER PUMPING PLANT ATINTAKE WELL 222 Supply of Vertical type oil lubricated statically, dynamically, hydraulicallybalancedturbinepumpcapableofdischargingat980 rpm the following duty condition as given below due to all causes with surface discharge head confirming to IS:1710 and as amended as on date with accessories as per IS 5120/1977(Reconfirmed 2011) and as amended thereafter to suit the site condition.The Pump Bowl assembly shall be FG: 260with 2% NiCi with CF8M impeller running at 980 rpm., head shaft, SS-410 line shaft , Rubber line shaft bearing , C.I. Bearing retainer, Suction bell mouth, strainer, oil tube and 24mtr/suitablelengthcolumnassembly,withverticalSolidshaft Squirrel cage induction motor copper wounded and die cast copper rotor (IS:126152011/IEC 60034-1) suitable for the above pump continuousratedTEFCIP-55withClassFinsulation,antirotation locking arrengementfor operation in AC, three Phase/50 HZ (±5%), 415V (±10%), running with a speed of pump.CAPACITY:- 6000 LPM / 35 Mtr. HEAD / 75 HP MOTOR (2w+1s) 223 MAIN PIPING AND VALVES :- 224 Supplyof250 mm dia DIDFSingleDoor/MultiDoorNonreturn/refluxvalve conforming to IS:5312/2003(part I & II) PN-1.0 to be fixed after pumps for 90% fast closing & 10% slow closing . 225 SupplyofDIDFsluicevalvewith Electricallyintegratedactuater (Totally enclosed, weather-proof and dust proof construction with IP- 67 (IP-68 for field installation),protectionclasssuitableforinstallation inanypositionwithout lubrication, leakage or other operational difficulty with special grease filledgearboxandsuitableformanualoperationforemergency which will automatically dis-engage on restoration of power to motor andwith10wattsinglephasespaceheaterandcontinuouslocal mechanicalpositionindicatorandindividuallyreplaceablecounter gear assembly and with two torque and four limit switches with S.S. flapandoperatedwithgeardrivencamsandofrating250Volt,5 Amp, AC/DC, torque switch dial and with TEFC squirrel cage induction) operated with positioning card suitable to SCADA operation sluice valve havingBody : DI GGG 40 / IS 1865 Gr. 400/15, Wedge : DI GGG 40 /IS 1865 Gr. 400/15, Dome : DI GGG 40 / IS 1865 Gr. 400/15, Wedge Nut: Brass / Al. Bronze , Spindle : SS AISI 410 , Seat Rings : LTB IS : 318 Gr. LTB 2,Spindle Nut : LTB IS : 318 Gr. LTB 2 .Valves generally conform to IS:5312.Flanges to be drilled as per IS:1538 Part-IV &VI.Valvesare suitablefor hydrostatictestpressureof10Kg./Cm2forseatand15Kg./Cm2for body(PN-1.0)of following sizes 226 250 mm dia size at Pump delivery 227 350 mm dia size at common header 228 SupplyofDIDF manuallyoperatedsluicevalvehavingBody : DI GGG 40 / IS 1865 Gr. 400/15, Wedge : DI GGG 40 /IS 1865 Gr. 400/15, Dome : DI GGG 40 / IS 1865 Gr. 400/15, Wedge Nut: Brass / Al. Bronze , Spindle : SS AISI 410 , Seat Rings : LTB IS : 318 Gr. LTB 2,Spindle Nut : LTB IS : 318 Gr. LTB 2 .Valves generally conform to IS:5312.Flanges tobedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatic test pressure of 10Kg./Cm2 for seat and 15Kg./Cm2 for body(PN-1.0 Rating) Sluice Valve of 350 mm dia size at By-pass 229 Supply and fabrication of main piping of following sizes350 x 250 x 350 mm MS D/F Tee (10 mm thickness) -3 No250 mm MS D/F Pipe 0.50 mt. (10 mm thickness) - 3 No 250 mm MS D/F Pipe 1.00 mt.(10 mm thickness) - 3 No 350 mm MS D/F Pipe 1.00 mt.(10 mm thickness) - 3 No 350 mm MS D/F Pipe 2.00 mt. (10 mm thickness) -1 No 350 mm MS D/F (10 mm thickness) Bend 90o - 2 No 350 mm Blind Flange - 1 NoNecessary G.I. Nut Bolt’s & Rubber Packing - 1 Lot 230 SupplyofD.I./D.F.DismantlingJointsisavariablelengthDouble Flanged Short Piece constituted by a flange / Spigot Tailpiece inserted into the other Tailpiece which allows the distance between the two flangestobevariedwithincertainlimitsthusprovidingavariable distance piece between two fixed flange end devices like Pumps and Valves. The Dismantling Joint to be supplied complete with Sealing RubberGasketsofEPDMquality(IS:5382/1985Type-4),CastIron Follower Glands and Mild Steel (Zinc Coated) Nut Bolts of Following size 231 Dismantling joint 200 mm dia size at pump delivery 232 Dismantling joint 350 mm dia size at common header 233 Suitable capacity heavy duty handoperatedoverheadTravelling(HOT)crane suitable for a span upto 6 Mtrs, and travel length upto 10 Mtrs. with clear lift upto 6 M including gear type chain pulley block and geared Travelling trolley complete with all accessories including girder. 234 MOTOR CONTROL CENTER (MCC) PANEL :-Singlefront,Indoor&floormounted,cubicaltypePanelfactory fabricated(2mmthickforsructure,1.6mmthickfordoor,covers shrouds and Gland Plate-3 mm thick) CRCA sheet duly power coated dust andvermin proof IP-54 /IS:2147, consideredEarth Bus-Bar-Copper Strip compitable to SCADA operation with RS485 Port consisting of INCOMMING SECTION400 A, 50KA, TPN, MCCB microprocessor baseed(O/C,S/C) release - 1No,SpreaderLinks&ExtendedROHfor-1No,3PhaseDigital Multifunction Meter- 1 No, Digital Voltmeter 0-500V- 3 No, Digital Amperemeter0-1000A -3Nos,CTFormeterResinCastCL- 1000A/5A,15VA - 3 Nos, Phase indication light LED type 220V AC - 1 Set, Control MCB SP 6A ,10KA ABB - 3 Nos, CT Shorting Terminal - 4 Nos, Neutral Link - 1 No.OUTGOING SECTION200 A, 50KA, TPN, MCCBmicroprocessor based (O/C,S/C) RELEASE - 3 No, Spreader Links & Extended ROH for MCCB - 3 Nos., 63A TPN MCCB 35KA- 2 Nos. Terminal 63A 235 SupplyofAirCooledDigitalsoftstartersuitablefortheLTmotor offered for operation in AC three Phase 50Hz (+/- 5%), 415V(+/-10%) including line contactors suitable for next standard higher KW rating, Over & Under load protection, short circuit & single phasing protection with frequency meter, Ampere meter, Voltmeter, indicating lamp6Nos,LEDON/OFFtypeandStart/Stoppushbuttonand InstrumentFuses,suitabletoSCADAoperationwithRS485Port rating capacity 75 HP / 55 KW 236 Supply & laying of 1.1KV grade XLPE insulated armured multi strand copperconductorcableof3Cx50sq.mm fromcontrolPanelto respective Motors with lugs etc. (copper conductor should be electrlytic grade copper, purity >99.97% ISI marked asper IS:1554 P-I/ IS :7098 P-I) 237 Supply & Fixing of Powder coated GI Cable Tray 150mmx50mmx1.6mm 238 Earthing with GI earth plate 1200 mm X 1200 mm X 12 mm thick includingaccessories, and providing masonryenclosurewith cover plate having locking arrangement and watering pipe of 3 metre long etc.withcharcoal/cokeandsaltasrequiredaccordingtolatest IS:3043 :2018 239 Supplying and laying 50 mm X 12 mm G.I.strip at 0.50 metre below groundasstripearthelectrode,includingconnection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done byoverlappingandwith2setsofbrassnutbolt&springwasher spaced at 50mm) 240 Supply of ABC Dry Powder type Fire Extinguisher 4.5 kg conforming to IS: 15683:2006 241 Supply of CE/UL Certified Surge protector for control panel 242 Supply of Auto Phase reversal unit / Automatic switch with inbuilt the delay & enclosure (Confirms to IEC: 60947-1 & IEC: 60947-6-1) of 400 Amp 243 S& F of all in one solar LED street light fixture with Integrated high efficient Monocrystalline panel with Lithium (LiFePO4) Ferro PhosphatebatterywithBISapprovedmake.luminaireshouldbe secondary optic lenses for better distribution with delivered efficacy of >100 Lumen per watt. Luminaire can be supplied with Hybrid switch along with indicator to understand the source of power( either from solar or AC supply).shall have certificate tested fromMNRE approved Lab.Guaranteefortotalsystemistwoyears.Note:Alltheabove should be integrated and should be 1 system. make: Bajaj/ Philips / Crompton. Compact SolarLED Street Light- 60W/12V/27Ah with GI pole 244 Internal & External electrification of Pump house :- 245 Twin tube light covered LED 20 Watt 246 450 mm dia exhaust fan 247 Providing & Fixing of IK07 IP-66 protected high power LED flood light system with Pressure diecast aluminium housing LM6/ ADC12 material 60 Watt Flood light 248 CompletewiringofPumphouse with1.5 Sqmm& 2.5Sqmm multistarndcopperconductorwire1.1KVwithrequired5A&15A switches, ceiling rose 249 RubbermatsforelectricalpurposeasperIS:5425-1969, plain/chequered (1mX2m) - 19mm thickness 250 INSTRUMENTATIONWORKS AT INTAKE WELL 251 Supply of CE/UL Full Bore Electromagnetic Flow Meter of approved makeoffollowing dia and specifications complete: Media : Water (Raw/ Chlorinated), Pressure:upto1.0 MPa,Process temp:-50degC, Flow/MeterTube:SS304, Electrode:SS AISI 316L /Hastelloy C276/Tantalum,LiningMaterial:Hard Rubber/ Neoprene/Poly-urethane(PU) , Flange : SS /CS, Flange Standard&Rating:ANSI150,Coilhousing:SSAISI304/Carbon Steel/DieCastAluminium, withanticorrosivepaint &provide completelysealed(leakproof)constructionasperrequirement ‘of IEC60529,Accuracy:+0.5%M.V.-velocity0.3to10m/s, Transmitter/signaconvertor Enclosure :DieCast Aluminium, Power Supply : 80-240V AC - 5OHz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart,Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parametersand totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable(size - 350 mm dia at common header) 252 SupplyofCE/ULCertifiedpressuretransmitterCEmarkdwith following technical parametersand Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 253 Supply of CE/UL cirtified ofRadar level transmitter CE marked with following technical parametersand Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 254 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with intelligent GSM Based modem unit with CPU and PowerSupplywithanalogandDigitalParameterandfeaturesas specified tostoreandtransmitdataonGSMbackbone,RTU/PLC designedwithlogictotansferdataatmultiplestationsandalso compatible for satellite communication. 255 Control panel with IP 54 Protection, Industrial grade forall equipment and 24V and power supply 256 GSM/GPRS based wirelesscommunicationwith 4G modem for RTU/PLC Capable to transfer and gather data from remotesites to control stations all accessories included with signal enhancer, antenna made for pumping plantwith SIM andrecharge 257 CE & UL Certified 10 HMI touch screen suitable to communication with PLC/RTU for local display & control of process parameters 258 CE/UL Certified Intelligent energy meters 259 Complete cabling for instrumentation works with power cabeling to panel of automation 260 SecuritySurvelliance IP 4.0 MP HD Bullet Guard + AudioCamerawith NVR 2 SATA, 2 TB HDD, HDMI cable, CAT 6 cable etc allrequiredaccessoriesfor pump house, substation and campus. 261 Installation, testing and comissioning of pumping plant & associated allequipmentsasperapproveddrawingshallbedonebybidder includingchequerredplateandpaintingofpumpingplant&main piping-valves. 262 Testing of Pumping Plant & Control Panel & valves etc at Manufacturer Works 263 CLEAR WATER PUMPING PLANT AT MCWR 264 SupplyofVerticaltypeselfwaterlubricatedstatically,dynamically, hydraulically balanced turbine pump capable of discharging at 1450 rpm thefollowingdutyconditionasgivenbelowduetoallcauseswith surfacedischargeheadconfirmingtoIS:1710andasamendedason datewithaccessoriesasperIS5120/1977(Reconfirmed2011)andas amended thereafter to suit the site condition.The Pump Bowl assembly shall be FG: 260 with 2% NiCi with CF8M impeller running at 1450 rpm., head shaft, SS-410 line shaft , Rubber line shaft bearing , C.I. Bearing retainer,Suctionbellmouth,strainer,oiltubeand05mtr/suitable lengthcolumnassembly,withverticalSolidshaft Squirrelcage induction motor copper wounded and die cast copper rotor (IS:126152011/IEC 60034-1) suitable for the above pump continuous rated TEFC IP-55 with Class F insulation, anti rotation locking arrengement for operation in AC, three Phase/50 HZ (±5%), 415V (±10%), running with a speed of pump.CAPACITY:- 5300 LPM / 50 Mtr. HEAD / 100 HP MOTOR (2w+2s) 265 MAIN PIPING AND VALVES :- 266 SupplyofDIDFSingleDoor/MultiDoorNonreturn/refluxvalve conforming to IS:5312/2003(part I & II) PN-1.0 to be fixed after pumps for 90% fast closing & 10% slow closing 250 mm 267 SupplyofDIDFsluicevalvewith Electricallyintegratedactuater (Totally enclosed, weather-proof and dust proof construction with IP- 67(IP-68 for field installation),protectionclasssuitableforinstallationinanypositionwithout lubrication, leakage or other operational difficulty with special grease filled gear box and suitable for manual operation for emergency which willautomaticallydis-engageonrestorationofpowertomotorand with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceable counter gear assembly and with two torque and four limit switches with S.S. flap and operated with gear driven cams and of rating 250 Volt, 5 Amp, AC/DC, torque switch dial and with TEFC squirrel cage induction) operated with positioning card suitable to SCADAoperation sluice valve having Body : DI GGG 40 / IS 1865 Gr. 400/15, Wedge : DI GGG 40 /IS 1865 Gr. 400/15, Dome : DI GGG 40 / IS 1865 Gr. 400/15, Wedge Nut: Brass / Al. Bronze , Spindle : SS AISI 410 , Seat Rings : LTB IS : 318 Gr. LTB 2,Spindle Nut : LTB IS : 318 Gr. LTB 2 . Valves aresuitable for hydrostatic test pressure of 10Kg./Cm2 for seat and 15Kg./Cm2 for body(PN-1.0)of following sizes :- 268 250 mm dia size at Pump delivery 269 350 mm dia size at common header 270 Supply of DIDFmanually operated sluice valve having body Body : DI GGG 40 / IS 1865 Gr. 400/15, Wedge : DI GGG 40 /IS 1865 Gr. 400/15, Dome : DI GGG 40 / IS 1865 Gr. 400/15, Wedge Nut: Brass / Al. Bronze , Spindle : SS AISI 410 , Seat Rings : LTB IS : 318 Gr. LTB 2,Spindle Nut : LTB IS : 318 Gr. LTB 2 . Valves generally conform to IS:5312.Flanges tobedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatic test pressure of 10Kg./Cm2 for seat and 15Kg./Cm2 for body(PN-1.0 Rating) Sluice Valve of 350 mm dia size at By-pass 271 Supply and fabrication of main piping of following sizes350 x 250 x 350 mm MS D/F Tee (10 mm thickness) -4 No250 mm MS D/F Pipe 0.50 mt. (10 mm thickness) - 4 No 250 mm MS D/F Pipe 1.00 mt.(10 mm thickness) - 4 No 350 mm MS D/F Pipe 1.00 mt.(10 mm thickness) - 4 No 350 mm MS D/F Pipe 2.00 mt. (10 mm thickness) -2 No 350 mm MS D/F (10 mm thickness) Bend 90o - 2 No 350 mm Blind Flange - 1 NoNecessary G.I. Nut Bolt’s & Rubber Packing - 1 Lot 272 SupplyofD.I./D.F.DismantlingJointsisavariablelengthDouble Flanged Short Piece constituted by a flange / Spigot Tailpiece inserted intotheotherTailpiecewhichallowsthedistancebetweenthetwo flangestobevariedwithincertainlimitsthusprovidingavariable distance piece between two fixed flange end devices like Pumps and Valves.TheDismantlingJointtobesuppliedcompletewithSealing RubberGasketsofEPDMquality(IS:5382/1985Type-4),CastIron Follower Glands andMildSteel (ZincCoated)NutBoltsof Following size 273 Dismantling joint 200 mm dia size at pump delivery 274 Dismantling joint 350 mm dia size at common header 275 3 Ton capacity hand operated over head Travelling (HOT) crane suitable for a span upto 6 Mtrs, and travel length upto 10 Mtrs. with clear lift upto 6 M including gear type chain pulley block and geared Travelling trolley complete with all accessories including girder. 276 MOTOR CONTROL CENTER (MCC) PANEL :-Single front, Indoor & floor mounted,cubical type Panel factory fabricated(2mmthickforsructure,1.6mmthickfordoor,covers shrouds and Gland Plate-3 mm thick) CRCA sheet duly power coated dustandverminproofIP-54/IS:2147,consideredEarthBus-Bar-Copper Strip compitable to SCADA operation with RS485 Port consisting of INCOMMING SECTION400 A, 50KA, TPN, MCCBmicroprocessor baseed(O/C,S/C) release - 1 No,SpreaderLinks&ExtendedROHfor-1No,3PhaseDigital MultifunctionMeter-1No,DigitalVoltmeter0-500V-1No,Digital Amperemeter0-400A -3Nos,CTFormeterResinCastCL- 200A/5A,15VA - 3 Nos, Phase indication light LED type 220V AC - 1 Set, ControlMCBSP6A,10KA-3Nos,CTShortingTerminal-4Nos, Neutral Link - 1 No.OUTGOING SECTION250 A, 50KA, TPN, MCCBmicroprocessor based (O/C,S/C) RELEASE - 4 No, Spreader Links & Extended ROH for MCCB - 4 Nos., 63A TPN MCCB 35KA- 2 Nos. Terminal 63A 277 SupplyofAirCooledDigitalsoftstartersuitablefortheLTmotor offeredforoperationinACthreePhase50Hz(+/-5%), 415V(+/-10%) including line contactors suitable for next standard higher KW rating, Over & Under load protection, short circuit & single phasing protection with frequency meter, Ammeter, Voltmeter, indicating lamp 6Nos, LED ON/OFFtypeandStart/StoppushbuttonandInstrumentFuses, suitable to SCADA operation with RS485 Port rating capacity 100 HP / 75 KW 278 Supply & laying of 1.1KV grade XLPE insulatedarmured multi strand copperconductorcableof3Cx95sq.mm fromcontrolPanelto respective Motors with lugs etc. (copper conductor should be electrlytic grade coppe, purity >99.97 % ISI marked as per IS:1554 P-I / IS:7098 P- I) 279 Supply & Fixing of Powder coated GI Cable Tray 150mmx50mmx1.6mm 280 EarthingwithGIearthplate1200mmX1200mmX12mmthick includingaccessories,andprovidingmasonryenclosurewithcover plate having locking arrangement and watering pipe of 3 metre long etc. with charcoal/ coke and salt as required according to latest IS:3043:2018 281 Supplyingandlaying50mmX12mmG.I.stripat0.50metrebelow ground as strip earth electrode, including connection/ terminating with nut,bolt,spring,washeretc.asrequired.(Jointingshallbedone by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 282 Supply of ABC Dry Powder type Fire Extinguisher 4.5 kg conforming to IS: 15683:2006 283 Internal & External electrification of Pump house :- 284 Twin tube light covered LED 20 Watt 285 450 mm dia exhaust fan 286 Providing & Fixing of IK07 IP-66 protected high power LED flood light system with Pressure diecast aluminium housing LM6/ ADC12 material 60 Watt Flood light 287 Complete wiring of Pump house with 1.5 Sqmm & 2.5 Sqmm multistarnd copper conductor wire 1.1 KV with required 5A & 15A switches, ceiling rose 288 Supply of CE/UL Certified Surge protector for control panel 289 RubbermatsforelectricalpurposeasperIS:5425-1969, plain/chequered (1mX2m) - 19mm thickness 290 INSTRUMENTATION WORKS 291 SupplyofCE/ULFullBoreElectromagneticFlowMeterofapproved makeoffollowingdiaandspecificationscomplete: Media: Water ( Chlorinated) , Pressure : up to 1.0MPa, Process temp:-50degC, Flow/MeterTube:SS304, Electrode:SSAISI 316L /Hastelloy C276/Tantalum,LiningMaterial:HardRubber/ Neoprene/Poly-urethane(PU) , Flange : SS /CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Cast Aluminium, withanticorrosivepaint&providecompletely sealed (leakproof) construction as per requirement ‘of IEC 60529, Accuracy:+0.5%M.V.-velocity0.3to10m/s,Transmitter/signa convertorEnclosure: Die CastAluminium,Power Supply : 80-240V AC - 5OHz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart,Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category-IP68forsensor(flowtube)andIP67fortransmitter/ convertor, including Surge Arrester, cable, of of following sizes :- 292 350 mm dia. Size at common header of pumping plant 293 350 mm dia. Size at OHT outlet of zone-1 294 350 mm dia. Size at OHT outlet of zone-2 295 450 mm dia. Size at OHT outlet of zone-3 296 200 mm dia. Size at OHT outlet of zone-4 297 Supply of Electrically Motor operated actuator with positioning card and bracketforsluicevalvesuitableforSCADAoperationwithlimit switches, auto de clutch for manual operation in emergency etcas per relevant IS suitable forOHT outlet of following sizes 298 350 mm dia. Size at OHT outlet of zone-1 299 350 mm dia. Size at OHT outlet of zone-2 300 450 mm dia. Size at OHT outlet of zone-3 301 200 mm dia. Size at OHT outlet of zone-4 302 SupplyofD.I./D.F.DismantlingJointsisavariablelengthDouble Flanged Short Piece constituted by a flange / Spigot Tailpiece inserted intotheotherTailpiecewhichallowsthedistancebetweenthetwo flangestobevariedwithincertainlimitsthusprovidingavariable distance piece between two fixed flange end devices like Pumps and Valves.TheDismantlingJointtobesuppliedcompletewithSealing RubberGasketsofEPDMquality(IS:5382/1985Type-4),CastIron Follower Glands andMildSteel (ZincCoated)NutBoltsof Following size 303 Dismantling joint 350 mm dia size at OHT outlet of zone-1 304 Dismantling joint 350 mm dia size OHT outlet of zone-2 305 Dismantling joint 450 mm dia size at OHT outlet of zone-3 306 Dismantling joint 200 mm dia size at OHT outlet of zone-4 307 Supply of CE/UL Certified pressure transmitter CE markd with following technical parametersand Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 308 Supply of CE/UL cirtified ofRadarlevel transmitter CE marked with following technical parameters and Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 309 CE & UL Certified PLC/ RTU with redundent CPU & power supply in IP 54 enclosure suitable to communicate with GSMBasedmodemwith redundentCPU andPower Supply with analog and Digital Parameter and features as specified for each ZPSto store and transmit data on GSM backbone, RTU/PLC designed with logic to tansferdataatmultiplestationsandalsocompatibleforsatellite communication for CWR. 310 Control panel with IP 54 Protection , Industrial grade for all equipment and 24V and power supply 311 GSM/GPRS based wireless communication with 4G modem for RTU/PLCCapabletotransferandgatherdatafromremotesitesto control stations all accessories included with signal enhancer, antenna made for pumping plantwith SIM and recharge for CWR & OHT 312 CE & UL Certified 10 HMI touch screen suitable to communication with PLC/RTU for local display & control of process parameters. 313 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with intelligentGSMBasedmodemunit with CPU andPower Supply with analog and Digital Parameter and features as specifiedto store and transmit data on GSM backbone, RTU/PLC designed with logic to tansferdataatmultiplestationsandalsocompatibleforsatellite communication for OHT 314 Control panel with IP 54 Protection , Industrial grade for all equipment and 24V and power supply 315 GSM/GPRS based wireless communication with 4G modem for RTU/PLCCapabletotransferandgatherdatafromremotesitesto control stations all accessories included with signal enhancer, antenna made for pumping plantwith SIM and recharge for OHT 316 CE/UL Certified Intelligent energy meters 317 Complete cabling of instrumentation equipments with power supply of panels for CWR & OHT 318 SecuritySurvelliance IP 4.0 MP HD Bullet Guard + AudioCamerawith NVR 2 SATA, 2 TB HDD, HDMI cable, CAT 6 cable etc allrequiredaccessoriesfor pump house, substation and campus. 319 Installation, testing and comissioning of pumping plant & associated all equipments as per approved drawing shall be done by bidder including chequerred plate and painting of pumping plant & main piping-valves. 320 Testing of Pumping Plant & Control Panel & valves etc at Manufacturer Works 321 11/0.44KV SUB STATION AT INTAKE WELL 322 Supply of star rated Copper wound distribution Transformer ( All the distributiontransformermustbestarratedaspernotificationof (BEE)ministryofpower,GoverenmentofIndia)offollowingrating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11, ONAN Cooled & as per BEE star level- 2 & BIS approved as per IS 2026-1977 & losses as defined as per IS 1180 part (I) 2014 including standard accessories like conservator, silica gel breather,Bucholz relay, radiator, fins, HT cablebox99.6 % & as per IS:1554 P-I / IS :7098 P - (I)from UPPCLmetering panel to H.T. Switch gear panel and panel to transformers 120 Sq.mm. size 326 Supply of H.T. Cable end termination heat shrinkable type indoor joint kit 120 sq.mm. 327 SupplyofH.T.Cableendterminationheatshrinkabletypeoutdoor joint kit 120 sq.mm. 328 Supply & laying of L.T. XLPE insulatedarmoured aluminium conductor cableof1.1KVgradeMaterial:-H4-Gradealuminium conductorofpurity>99.6%&asperIS:1554P-I/IS:7098P- (I),conductor shall have electrolytic aluminium confirming to IS 8130, IS 3975-1999.From transformer to Main LT panel and main LT panel to MCC panel of 3.5C x 300 Sq.mm. 329 Earthing with copper earth plate 1200 mm X 1200 mm X 12 mm thick includingaccessories,andprovidingmasonryenclosurewith cover plate having locking arrangement and watering pipe of 3 metre long etc.withcharcoal/cokeandsaltasrequiredaccordingtolatest IS:3043 330 Supplying and laying 50 mm X 12 mm G.I.strip at 0.50 metre below groundasstripearthelectrode,includingconnection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done byoverlappingandwith2setsofbrassnutbolt&springwasher spaced at 50mm) 331 Supply and Fixing of fire extinguisher of 5 Kg. capacity conforming to IS: 15683:2006 332 RubbermatsforelectricalpurposeasperIS:5425-1969, plain/chequered (1mX2m) - 19mm thickness 333 NOC from electrical safety Dept. Govt. of UP 334 Fancing of substation in 2mtr height made from MS iron Jali & MS flat, angleironandgroutinginpropermannerasperrelevantIScode including supply and laying of stone grit. 335 Internal & External electrification of HT & LT panel room :- 336 Twin tube light covered LED 20 Watt 337 450 mm dia exhaust fan 338 Providing & Fixing of IK07 IP-66 protected high power LED flood light system with Pressure diecast aluminium housing LM6/ ADC12 material 60 Watt Flood light 339 CompletewiringofHTandLTroom with1.5Sqmm&2.5Sqmm multistarndcopperconductorwire1.1KVwithrequired5A&15A switches, ceiling rose 340 S& F of all in one solar LED street light fixture with Integrated high efficient Monocrystalline panel with Lithium (LiFePO4) Ferro PhosphatebatterywithBISapprovedmake.luminaireshouldbe secondary optic lenses for better distribution with delivered efficacy of >100 Lumen per watt. Luminaire can be supplied with Hybrid switch along with indicator to understand the source of power( either from solar or AC supply).shall have certificate tested fromMNRE approved Lab.Guaranteefortotalsystemistwoyears.Note:Alltheabove should be integrated and should be 1 system. make: Bajaj/ Philips / Crompton. CompactSolarLEDStreetLight- 60W/12V/27Ah with GI pole 341 Supplyofmicroprocessorbasedthreephasesensingpowerfactor correction relay panel , IEC / EN 61000-6- (2&4) having 3 CT sensing, sensitivity up to 50 milli amp secondary current , self analysing auto c/k setting according to targeted power factor setting, the relay shall have digit display unit for display of real power factor, targeted power factor,lag/leadcapacitorswitchingstatus,alarmoutputforunder current, over current, insufficient compensation, communication interface with RS 485, indication of switching on units, auto/manual status, and shall have over load protection, no volt release , having multi parameter like KW, KVA, KVAR rating capacity of 100 KVAR 342 SITC of 01 No. DG Set of Capacity 180 KVA 415+ volt with AMF control Panel cabling,copper earthing etc. complete in all respect.( As per Lataest CPCB- IV Emission Norm ) 343 Installation, testing and commissioning of 11 KV /.44 KV substations includingH.T.panelandL.T.panelincludingchequeredplates,all labour T&P complete in all respect. 344 Testing of DG., Transformer, HT and LT Panel etc at Manufacturer Works 345 11/0.44KV SUB STATION AT MCWR 346 SupplyofstarratedCopperwounddistributionTransformer(Allthe distribution transformer must be star rated as per notification of (BEE) ministry of power, Goverenment of India) of following rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11, ONAN Cooled & as per BEE star level- 2 & BIS approved as per IS 2026-1977 & losses as defined as per IS 1180 part (I) 2014 including standard accessories like conservator, silica gel breather,Bucholz relay, radiator, fins, HT cable box & LT cable boxes, Off -LTC (+7.5% to - 15% @ 2.5%) temperature rise of 40 degree C inoil/45degreeCinwinding,ISImarkeddrainvalve,Dialtype Temperature gauge, OTI & WTI, marshalling box, first filling of transformer oil as per IS :335-1953, Epoxy based paint.Rating capacity - 400 KVA (1w+1s) 347 Supply of SCADA Compatible with RS 485 port 11KV,800 A, 25kA / 1 Sec, VCBIndoortypepanelHTboard,freestandingmotoroperated& withdrawaltypefabricatedfrom2mmthickCRCAsheetsteel,With copper busbar, Ammeter, Voltmeter, PF Meter, KWH Meter, MDI Meter, Selector Switches as required, CRT-CT of required ratio (15VA ; Cl-1.0 / 0.5 ) PT (11 KV /110V/√3) , Fuses , IP42 Protection, 10 / 12-window Annunciation Panel, AC/ DC Control voltage 24/48/ 110/230V , LED Indication lamps , S/C, O/C & E/F Protection (IDMT) Relays Alarm & trip contacts for Transformer protection(High oil temperature, Buchholz protection, high winding temperature, power pack 2 x 12 V,etc complete in all respect ready to use(RTU),OEM Must have BIS certificate incuding 1no incoming & 2 no outgoing VCB 348 Singlefront,Indoor&floormounted,cubicaltypeLTPanelfactory fabricated (2 mm thick for sructure, 1.6mm thick for door,covers shrouds and Gland Plate-3 mm thick) CRCA sheet duly power coateddust and vermin proof IP-54 /IS:2147, considered Earth Bus-Bar-Copper Strip compitable to SCADA operation with RS485 Port consisting of INCOMMING SECTION800 A, 50KA, TPN, ACB, EDOmicroprocessor baseed(O/C,S/C) release-2No SpreaderLinks&ExtendedROH -2No,3PhaseDigital MultifunctionMeter -1No,DigitalVoltmeter0-500V -1No,Digital Ammeter 0-400A -1No, CT For meter Resin Cast CL-1400A/5A,15VA - 3 Nos, Phase indication light LED type 220V AC - 1 Set, Control MCB SP 6A,10KA ABB - 3 Nos, CT Shorting Terminal - 4 Nos, Neutral Link - 1 No.OUTGOING SECTION400 A,50KA,TPN, MCCB microprocessor based (O/C,S/C) RELEASE-2 No, 200 A,50KA,TPN, MCCB microprocessor based (O/C,S/C) RELEASE-2No, spreader Links & Extended ROH for MCCB - 4 Nos., 63A TPN MCCB 32KA- 2 Nos. Terminal 63A 349 Supplyandlayingof11/12KVgradeXLPEinsulatedH.T. armouerd cableasper IS:7098 / II/85,H4- Grade aluminium conductor of purity >99.6 % & as perIS:1554P-I/IS:7098P-(I)fromUPPCL meteringpaneltoH.T. Switch gear panel and panel to transformers 120 Sq.mm. size 350 Supply of H.T. Cable end termination heat shrinkable type indoor joint kit 120 sq.mm. 351 Supply of H.T. Cable end termination heat shrinkable type outdoor joint kit 120 sq.mm. 352 Supply & laying of L.T. XLPE insulatedarmoured aluminiumconductor cableof1.1KVgradeMaterial:-H4-Gradealuminiumconductorof purity >99.6 % & as per IS:1554 P-I / IS :7098 P-(I),conductor shall have electrolytic aluminium confirming to IS 8130, IS 3975-1999.From transformer to Main LT panel of 3.5C x 300 Sq.mm. (in 2 run for each transformer) 353 Supply & laying of L.T.XLPE insulatedarmoured aluminiumconductor cableof1.1KVgradeMaterial:-H4-Gradealuminiumconductorof purity >99.6 % & as per IS:1554 P-I / IS :7098 P-(I),conductor shall have electrolytic aluminium confirming to IS 8130, IS 3975-1999.From Main LT panel to MCC Panel at WTP of 3.5C x 150 Sq.mm. 354 Supply & laying of L.T.XLPE insulatedarmoured aluminiumconductor cableof1.1KVgradeMaterial:-H4-Gradealuminiumconductorof purity >99.6 % & as per IS:1554 P-I / IS :7098 P-(I),conductor shall have electrolytic aluminium confirming to IS 8130, IS 3975-1999.From Main LT panel to MCC Panel at MCWR of 3.5C x 400 Sq.mm. 355 EarthingwithGIearthplate1200mmX1200mmX12mmthick includingaccessories,andprovidingmasonryenclosurewithcover plate having locking arrangement and watering pipe of 3 metre long etc. with charcoal/ coke and salt as required according to latest IS:3043:2018 356 Supplyingandlaying50mmX12mmG.I. stripat0.50metrebelow ground as strip earth electrode, including connection/ terminating with nut,bolt,spring,washeretc.asrequired.(Jointingshallbedoneby overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 357 Supply and Fixing of fire extinguisher of 5 Kg. capacity conforming to IS: 15683:2006 358 Rubber mats for electrical purpose as per IS:5425-1969, plain/chequered (1mX2m) - 19mm thickness 359 NOC from electrical safety Dept. Govt. of UP 360 Fancing of substation in 2.5mtr height made from MS iron Jali & MS flat, angleironandgroutinginpropermannerasperrelevantIScode including supply and laying of stone grit. 361 Internal & External electrification of Pump house :- 362 Twin tube light covered LED 20 Watt 363 450 mm dia exhaust fan 364 Providing & Fixing of IK07 IP-66 protected high power LED flood light system with Pressure diecast aluminium housing LM6/ ADC12 material 60 Watt Flood light 365 CompletewiringofHTandLTroom with1.5Sqmm&2.5Sqmm multistarndcopperconductorwire1.1KVwithrequired5A&15A switches, ceiling rose 366 Supply of Auto Phase reversal unit / Automatic switch with inbuilt the delay&enclosure(Confirms to IEC:60947-1&IEC: 60947-6-1)of 630 Amp 367 Supplyofmicroprocessorbasedthreephasesensing auto powerfactor correction relay panel , IEC / EN 61000-6- (2&4) having 3 CT sensing, sensitivity up to 50 milli amp secondary current , self analysing auto c/k setting according to targeted power factor setting, the relay shall have digit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current,insufficientcompensation,communicationinterfacewithRS 485, indication of switching on units, auto/manual status, and shall have over load protection, no volt release , having multi parameter like KW, KVA, KVAR rating capacity of 200 KVAR 368 SITC of 01 No. DG Set of Capacity 380 KVA 415+ volt with AMF control Panel cabling, earthing etc. complete in all respect. ( As per Lataest CPCB- IV Emission Norm ) 369 Installation,testingandcommissioningof11KV/.44KVsubstations including H.T. panel and L.T. panel including chequered plates, all labour T&P complete in all respect. 370 Testing of D.G, Transformer, HT and LT Panel etc at Manufacturer Works 371 Automation of DMA 372 Flow Control Valve 373 Supplying, installing ,commissioning & testing of Flow Control Valvefor inlet with flow measuring, flow controlling, pressure monitoringandweb based with cable PLC etc Complete.Pattern Hydraulically operated self actuated flow & level control valve (either with float or altitude pilot) with downstream orifice having Ductile Iron valve body, Y - Pattern, Double Chamber, unitized actuator, Fusion bonded epoxy coating, copper control tubing with Latching Solenoid & Pilot operated as per design, additional speed control feature, drip tight sealing, In-line serviceable, internals stainless steel & protected diaphragm suitable for drinking water. 374 For Zone -1 375 300 mm ( for OHT Inlet) 376 250 mm ( DMA-1) 377 250 mm ( DMA-2) 378 250 mm ( DMA-3) 379 For Zone -2 380 300 mm ( for OHT Inlet) 381 200 mm ( DMA-1) 382 250 mm ( DMA-2) 383 250 mm ( DMA-3) 384 For Zone -3 385 450 mm ( for OHT Inlet) 386 300 mm ( DMA-1) 387 400 mm ( DMA-2) 388 300 mm ( DMA-3) 389 For Zone -4 390 100 mm ( for OHT Inlet) 391 200 mm ( DMA-1) 392 IsolationValve 393 Supplying, installing ,commissioning & testing of DI Isolationvalve with electric acuator for isolation of DMA flow controling with cable PLC etc Complete. 394 For Zone -1 395 250 mm ( DMA-1) 396 250 mm ( DMA-2) 397 250 mm ( DMA-3) 398 For Zone -2 399 200 mm ( DMA-1) 400 250 mm ( DMA-2) 401 250 mm ( DMA-3) 402 For Zone -3 403 300 mm ( DMA-1) 404 400 mm ( DMA-2) 405 300 mm ( DMA-3) 406 For Zone -4 407 200 mm ( DMA-1) 408 Pressure Transmitter 409 Supplying, installing ,commissioning & testing of CE/UL Certified Pressure Transmitterfor pressure monitoring web based with cable PLC etc Complete for all 10 DMA,s of All 4 Zones 410 Electromagnetic Flow Meter 411 Supplying, installing ,commissioning & testing of CE/UL Certified Electromagnetic Flow Meterfor Flow monitoringweb based with cable PLC etc Complete 412 For Zone -1 413 250 mm ( DMA-1) 414 250 mm ( DMA-2) 415 250 mm ( DMA-3) 416 For Zone -2 417 200 mm ( DMA-1) 418 250 mm ( DMA-2) 419 250 mm ( DMA-3) 420 For Zone -3 421 300 mm ( DMA-1) 422 400 mm ( DMA-2) 423 300 mm ( DMA-3) 424 For Zone -4 425 200 mm ( DMA-1) 426 Residual Chlorine Analyser 427 SITC of Chlorine Analyser with MODBUS RTU having Following specification - (a) FRC senser range 0-5 ppm (b) Analyser with RS 485 O/P suitable to OHT distribution line and compatible with SCADA system toofor all 10 DMA,s of All 4 Zones 428 Chlorine Dozer For DMA 429 SITC of SCADA Compatible Chlorination Systemfor all 10 DMA,s of All 4 Zones 430 SCADA For DMA 431 CE & UL Certified PLC/RTUin IP 54 enclosure suitable to Communicate with GSM based modem unit with CPU & Powersupply with annlog & digital parameter & featuers as specified, for each DMA to store and transmit dataon GSM backbone, RTU/PLC desgined with logic to transfer data at multiple stations with control panel as specified intender technical specifications. 432 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories include with signal enhancer antenna made for pumping plant internetcharges as specified in tender technical specification . 433 Intelligent energy meters 434 Control Panel with IP 54 Protection, Industrial Grade for all equipment. (Separate for control (24 V) and power equipments.) upto 3 pumps. 435 CE/ UL Certified 10 HMI touch screen suitable to communication with PLC/RTU for local display & control of process parameters. 436 CE/UL Certified 1 KVA UPS with Batteries for data backup. 437 CE/UL Certified 10 KVA UPS with Batteries for valve operation of each OHT . 438 Cabling 439 Complete Cabling for Intake well including all power & control cable of all equipments at ZPS and OHT. 440 SecuritySurvelliance IP 4.0 MP HD Bullet Guard + AudioCamerawith NVR 2 SATA, 2 TB HDD, HDMI cable, CAT 6 cable etc allrequiredaccessories . 441 MASTER CONTROL STATION (MCS) AT WTP 442 CE/UL & BIS Certified industrial grade LED MONITOR with latestconfiguration as per specification 65 443 Video call media player of same OEM 444 Core i7 10th gen Desktop/ laptop with 32 GB RAM and 256 GB SSD + 1TB HDD 445 CE/UL Certified 5 KVA UPS with Batteries required for mentioned work wih 01 hrs backup 446 Full Development version of TAGS SCADA software with costomization of software for MCS for unlimited digital and analog Input / output features as per requirements 447 CE/ULcertifiedmastercontrolroomPLCwithredundantCPU&power supply at MCS in IP-54 enclosure as per site requirement and specification required to complete in all respect 448 CE/UL certified Field gateway agent for transfering data forMCS/control room 449 GSM/GPRSbasedwireless/Broadband/equivelentcommunicationsystem for PLC Capable to transfer and receive data & gather data from remote sitestocontrolstationsallaccessoriesincludedwithsignalenhancer,antenna along with running expences 450 CE/UL certified Firewall for network protection 451 CE/UL Certified Surge protector for Ethernet communication protection 452 CE/UL Certified industrial grade Ethernet switch 453 Mobile app facility system architecture (industries internet based & viewed through mobile apps for increasedblocal & remote visibility) 454 Canon/HP or equivalent Laser Printer 1018 or equivalent. 455 Hp or equivalent multifunctioning Laser Printer with scanner 456 BEE : 5 Star rating 1.5 Ton capacity air conditioner with voltage satbilizer 457 Office furniture ( office table - 2 No, revolving chair- 2No, Office chair-3 No, Godrej almirah - 1No) 458 SecuritySurvelliance IP 4.0 MP HD Bullet Guard + AudioCamerawith NVR 2 SATA, 2 TB HDD, HDMI cable, CAT 6 cable etc allrequiredaccessories. 459 Installation, Commissioning and testing of all above equipments for MCS with all power cables 460 TRAIL & RUN FOR 3 MONTHS WITHOUT ELECTRICITY CHARGES
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 5
Uttar Pradesh View Result →
6.
Housing Urban and Rular Development #9493817 Technical Bid
Tender For Kareli - Nurulla Road to Askari Market Road Block C and Block D Housing Scheme and Nurulla Road from Mahavir Chauraha to Karamat Ki Chowki near Sasur Khedari River and also till the connecting road - Clearing grass and removal of rubbish upto a distance of 30 m outside the periphery of the area as per Technical Specification Clause 201. 3 Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 60 metres as per instructions of E-I-C. (By Mechanical means). 4 i) Cement Concrete 5 ii) Reinforced cement concrete/ R.B. 6 Dismantling of flexible pavements and disposal of dismantled material up to a lead of 100 m, stacking serviceable and unserviceable materials separately as per Technical specification Clause 202. Bituminous / Granular Courses (By Mechanical means) 7 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 8 Removing all type of Hume Pipes and Stacking within a lead of 1000 metres including T&P, Earthwork and Dismantling of Masonry Works. 9 (i) Up to 600 mm dia 10 Removal of telephone / Electric poles / Street light / Lamp post including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and up to a lead of 1000 metres and stacking the serviceable and unserviceable material separately 11 Disposal of moorum/building rubbish malba/ similar unserviceable, dismantled or waste material by mechanical transport Including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note- Item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more. 12 Dewatering using 10HP to 70HP diesel engine pump set including Hire charges, cost of Diesel, Engine oil, pump operator, labor charges, conveyance of pump set and fuel to site and back, loading, unloading and any other incidental charges etc., complete. (Hire charges for Diesel Pump set for 10 HP) 13 [B] Bill No. 2 - Earthworks 14 Excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and leading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections and transporting to the embankment location within all lifts and lead upto 1000m 15 Removal of unserviceable soil including excavation loading and disposal but excluding replacement by suitable soil which shall be paid separately as per clause 305 16 i) Lead upto 1000 M 17 ii) Lead upto 8000 M 18 Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out construction of shoring and bracing, removal of stumps and other deleterious matter dressing of sides and bottom, backfilling the excavation earth to the extent required and utilizing the remaining earth locally for road work. 19 Mechanical Means (Depth upto 1.5 m) 20 i) Excavation 21 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. 22 [C] Bill no. 3 - Development of Carriageway 23 Stabilization of in-situ (existing pavement crust) or soil or otherwise sub base/ base course up to the required depth by cold in-situ recycling using cement and chemical additives / otherwise: Providing pulverizing, spreading, milling and mixing of chemical additives at the appropriate rate as per job mix design in accordance with IRC-SP-72-2015 , IRC-37-2012 & 2018 and IRC SP 89 (part II) 2018. Cementitious additive @ rate of minimum 5 - 7% and CCS/CS additive should be spread on the existing pavement using a mobile truck mounted containerized cement/ additive spreader with micro processor controlled weighing and spreading system. The additive spreader shall have variable working width sufficient to cover whole pavement lane. The in-situ stabilization process shall be carried out by a mobile and self propelled stabilizer / reclaimer of working width of 2.4 m and with minimum engine horse power of 440 kw with a variable working depth up to 50 cm. The resultant stabilized mix then would be profiled to the required grade, level and thickness using motor grader and the mix would be compacted using 20 tonne pad foot roller in combination with smooth wheel roller to achieve desired proctor density as per IRC 37-2012 & 2018 and complete in all respect and curing with water as required including all materials, labour and machinery etc. The entire in-situ process would be carried out in single pass with milling and pulverising of damaged asphalt pavement / soil/ aggregates / soil-aggregate mixture to the desired depth and with simultaneous addition of additives and water with machine integrated spray bars fited on the wheeled self-propelled and vibratory pad foot roller to achieve the desired proctor density in all respects. The tandem roller be followed by Pneumatic Tyre Roller. The minimum unconfined compressive strength (UCS) of stabilized sub base/ base should be 4.5 to 7 MPa after 7 / 28 days of curing as per IRC-SP- 72-2015 , IRC-37-2012 & 2018 . Also durability aspects (wet-dry cycles) of stabilized sub base should be satisfied as per IRC 37-2012 & 2018 and IRC SP 89 (part II) 2018. The gradation mixes and materials should be as per IRC 37-2012 & 2018 and IRC SP 89 (part II) 2018. The train of equipments to be used are binder spreader- water Tanker- Additive Truck- Recycler- Padfoot Roller (20 Tonne) + Single Drum Compactor- Grader- Tandom Roller- Pneumatic TyreRoller (20 Tonne) 24 SAMI LAYERProviding and laying Stress Absorbing Membrane Interlayer (SAMI)/bitumen impregnated geotextile layer after clearing of the road surface geotextile conforming to physical requirements of claues 703-3, laid over a tack coat of paving grade Bitumen 80- 100 penetration, laid at the rate of 1.05 kg per sqm over thoroughly cleaned and repaired surface to provide a water resistance membrane and crack retarding layer paving fabric to be free of wrinkling and folding and to be laid before cooling of tack coat, brooming and rolling of surface with pneumatic roller to maximise paving fabric contact with pavement Surface. 25 Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (Tack Coat on Bituminous surfaces ) 26 Providing and laying 40mmthickBitumencarpete(B.C.) with 100-120 TPh hot mix plant producing and average output of 75 tonege par hour using crushed aggregates of specified grading premixed with bitumen binder(VG-30) @ 5.40% of mix as per MOST specification clause. etc all comp of work. 27 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from aggregat aggregate natural sources, Portland Pozzolana/Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall. be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 28 M.S. (TOR steel or plain) in plain work such as RCC or RB work including binding for proper shape and including supply of steel and its wastage bend, hooks and authorized overlapping shall be measured and including cost of binding wire. Excluding GST (SOR-504). 29 [D] Bill No. 4 - Pedestrian Infrastructure (Footpath) 30 Sand Filling in Foundation Trenches as per Drawing & Technical Specification and as per direction of Engineer-in-charge. (including beneath all paver blocks, cobble areas for levelling purpose, etc.) 31 Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. (PCC below all paving area, Kerb Channel, Road edge kerb, Table top, Property edge beam) 32 Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (by mix in place method) 33 i) For Grading-I Material 34 Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications, PCC Grade M30using batching plant transit mixer & manual placing(80 mm thickness) r & manual placingand giving broom finish. (PCC with broom finish thickness 80 mm) 35 Providing and laying 75mm thick M-30 grade batch mix cement concrete and Applying stamping finish to the top surface of freshly laid plain/ reinforced cement concrete of specified grade in porticos, sidewalks, driveways, pool decks and open yards as per direction of the Engineer-in-Charge. The process shall include the following:-The concrete shall be placed and screeded to the finished grade, and floated to a uniform surface by using standard finishing techniques. The approved color hardener @ 2.7 kg/sqm shall be applied evenly to the surface of the fresh concrete by the dry shake method by sprinkling in two or more shakes, floated after each shake and trowelled only after the final floating. The approved release agent @ 0.113 kg/sqm shall be applied evenly to the trowelled surface before stamping or the said release agent can be applied to the flexible polyurethane stamp moulds of approved design and in required sizes to achieve final stamped pattern. These stampings shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufficient size & weight to leave proper stamp marks and the process repeated for the remaining concrete surface till the hole surface to be stamped is completed within the time while concrete is in plastic stage of setting.After stamping, the curing shall be done as per manufactures specifications. After initial curing the imprinted joints shall be grouted using cement slurry mixed with color hardener as per theequirement. The surface shall be sealed by applying acrylic based sealer not less than 0.167 litre/sqm.on finished surface.The construction joints shall be provided by groove cutting of size 4mm x 20mm in panel size 3m x 3 m or lesser as per the site conditions and filling the same with 10 mm baker rod and providing and laying (PU) Polyurethane based joint sealer of approved make as per manufacturer’s specifications and finished by applying Polyurethane resin based top protective clear coat of minimum 80 micron applied with rollers on properly cured and dry clean surface. (Cost of concrete for flooring is not included in this item which shall be paid separately.) 36 80 mm thick C.C. paver block of M-35 grade with approved color design and pattern. 37 Supply and fixing of Tactile indicators made from SS-304 grade stainless steel. Warning Tactile indicator Shall be installed on the walking surface in a raised grid pattern of dots or stud. Minimum 36 studs to be placed in 300X300 mm area. Dimensions - 35mm Outer Dia x25mm Inner Dia, Stem Dia 8mmx12mm, Weight - 28grm.All the indicator will be installed into correctly drilled holes and place any suitable adhesive, All the indicators shall be aligned property, all complete as per direction of Engineer-in-charge. 38 Supply & fixing of Tactile indicators made from SS-304 grade stainless steel. Directorial Tactile indicator shall be installed on walking surface, consisting of a series of raised bar/strip. Min 4 bars/strip to be placed in direction perpendicular to distance of travel in 300X300 mm area. Dimensions-280mm L x 35mm W x 4.5mm, Stem Dia 8mmx12mm, Weight - 250grm All the indicator will be installed into correctly drilled holes and place any suitable adhesive, All the indicators shall be aligned property., all complete as per direction of Engineer-in-charge. 39 Providing and laying Tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colors and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge 40 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). (DSR-11.20) 41 Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge. (Saucer drain along the road edge, Curved Kerbs at Property Entry/Exit, Curved Kerbs at side roads) 42 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 43 CC Grade M20 using batching plant transit mixer & manual placing all complete as per direction of E-I-C. 44 [E] Bill No. 5 -Parking 45 Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (by mix in place method) 46 i) For Grading-I Material 47 Supplying and filling in plinth with sand under floors/in trenches, including watering, ramming, consolidating and dressing all complete with material (from source to site), labor and T&P etc. required for proper completion of the work. (Including Royalty). 48 Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days and giving broom finish. (PCC) 49 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-35 grade with approved color design and pattern. 50 [F] Bill No. 6 -Cycle track 51 Nil 52 [G] Bill No. 7 - Traffic Signs, Markings and Other Road Appurtenances 53 Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer[1]in-Charge.(Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work). 54 Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrile) or HIPS (High-impact Polystyrene) or Acrylonitrile Butadiene Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4260. The Reflective panels shall consist, of number of lenses containing single or dual prismatic cubes capable of providing total internal reflection of the light entering the lens face. Lenses shall be moulded of methyl methacrylate conforming to ASTM D788 of equivalent. The slop or retro-reflecting surface shall preferably ba 5+/.5 degree lo base and the area of each retro -reflecting surface shall not be less than 13.00 $Q.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel , to the Engineer . In addition , a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. In case the markers are, displaced , damaged . get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer , at his own cost. The rate shall include all materials, labor, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge, 55 RPM With Shank 56 Solar Power Road Marker The solar studs shall be made of aluminum alloy and polycarbonate material which shall be absolutely weather resistant and strong enough to support to load of 13,635 kg tested in accordance with ASTM D4280. Its color may be white, red, yellow, green or blue or combination as directed by the Engineer. Its water resistance shall meet the requirements of IP 65 in accordance with IS: 12063:1987 category 2 for the protection against water ingress. The dimensions of solar studs shall not be less than 100 mm * 100 mm * 10 mm. It shall have super bright LEDs so as the provide long visibility from a distance of more than 800 m. Its flashing rate shall not be less than 1 Hz. Its should be able to give the prescribed performance in the temperature range of -40 degree C to +55 degree C. Its life shall be not less than 3 Years. The rate shall include all material, labor, equipments, fabrication, transportation erection, installation and incidentals all complete as per direction of the engineer-in-charge 57 R.CC work (1:1.5:3) (M-20) with cement course sand &20mm the stone grit including all complete cement concrete with cement sand &20mm gauge stone Grit with the proportion of (1:1.5:3)including all complete the work (MORTH RA-12.8 C, Case-II) 58 M.S. or Iron work plain or Tor for RCC work including cutting, bending, rivetting or welding etc. where necessary. Excluding GST (S.I.No-504) 59 Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces 60 M.S. or Iron work of heavy sizes section such as Trusses, built up gates, record racks, roof work, gates etc. Including rivetting or welding where necessary. Excluding GST (S.I.No-503) 61 Painting of M.S. Grill with enamul paint etc all complete work. (S.I. 15.15 new item no.) 62 Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. 63 Providing and fixing of retro- reflectorized cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting type-IVvide clause 801.3, 2mm thick aluminum sheeting, 1.5 mm thick supported on mild steel angle iron post 75mm* 75mm *6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm* 45cm*60 cm, 60 cm below ground level as per the approved drawing. The retroreflective sheeting shall be tested for a certificate of having the sheeting coefficient of retro reflection, daytime, color and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoors weathering and its having passed these tests shall be obtained from international/ government laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should be also obtained from Indian condition within 3 years of launching ofproduct by the manufacturing abroad. Alternatively, a certificate conforming to ASTM specification (D4956-09) on Artificial accelerated weathering requirement from a reputed laboratory in India can be accepted provisionally. In such a situation , the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of 3 years outdoor weathering of the sheeting as per IRC 67:2012 . Legends, letters, numerals, and borders etc. should be as per MoRT&H specification 801.3.7. Proof of the same in form of government reports shall be uploaded while quoting tender. 64 90 cm equilateral triangle with diffinitation plate size (20cm x 60 cm) 65 60 cm equilateral triangle with diffinitation plate size (20cm x 60 cm) 66 60 cm circular with diffinitation plate size (20cm x 60 cm) 67 80mm x 60mm rectangularwith diffinitation plate size (20cm x 60 cm) 68 60 mm x 45 mm rectangularwith diffinitationplate size (20cm x 60 cm) 69 60cm x 60cm square with diffinitation plate size (20cm x 60 cm) 70 90 cm high octagon 71 Direction and place Identification signs up to 0.90 sqm size Board Providing and erecting direction and place identification retro-reflectorized sign as per IRC-67 made of high intensity grade sheeting The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime color and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/ Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals and borders etc. should be as per MoRT&H specification No-801.3.7. Sheet fixed over aluminum sheeting 2 mm thick with area not exceeding 0.9 sqm. Supported on a mild steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60cm., below ground level as per approved drawing, complete. 72 Direction and place Identification signs with size more than 0.90 sqm size BoardProviding and erecting direction and place identification retro-reflectorized sign as per IRC-67 made of high intensity grade sheeting The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime color and luminance, shrinkage, flexibility. liner removal, adhesion, Impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals and borders etc. should be as per MoRT&H specification No-801.3.7. Sheet fixed over aluminum sheeting 2 mm thick with area exceeding 0.9 sqm. Supported on a mild steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing, complete. 73 Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lense type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans & as per IRC :67 74 Brick Masonry Work in Cement Mortar 1:4 (1Cement: 4 Coarse Sand) in Foundation complete with Cement Concrete Bricks procured from C&D Waste Recycling Plant Baswar excluding Pointing and Plastering, as per Drawing and Technical Specifications. 75 Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 finerness modulus.SOR 2022 SI no574 76 12 mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement :3 sand)and as per direction of Engineer in charge. 77 Finishing walls with ready mixed Premium acrylic emulsion paint (company depot tinted) having Volatile Organic Compound (VOC)less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali, & fungal resistance, dirt resistance exterior paint of required shade with silicon additive(for painting wall, street furniture) New work (two or more coats applied @1.43 liter/10sqm over and including priming coat of exterior primer applied @ 0.90 liter/10 sqm) 78 Supplying and Fixing of cast iron antique style bench having weight of sides not less than 72 kg (36 kg each) fitted with fibre rectangle strip (should not be less than 50 mm X 25 mm and 1.6mm thick. Length of Bench should not be less than 6 ft (end to end of castiron support). 79 [H] Bill no. 8 - Utility and street light cabling 80 Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.(PCC below pipe of Storm water, Sewer, Water, Inspection chamber for storm water, telecom chamber, power chamber and sewer) 81 Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete (Storm water, sewer) 82 600 mm dia RCC pipes 83 Providing of 7- Way 40mm Multi Ducts with solid permanently solidly lubricated Silicone in inner layer for ICT fiber cables conforming to ASTM F 2160, ASTM D 2444 and /or equivalent Indian standard. External Sheathshall be in Orange Colorand shall be free from visual defects like blisters, shrink holes,flaking, scratches, groove lines & surface roughness. The color of the 7 nos. PLB HDPE ducts shall be Green, blue, yellow, Brown, violet, Grey , Red for differentiation. Outer sheet thicknessshall be 1.2mm +/-0.2mm. The inner surface of the multi channel ducts shall be spirally ribbed & shall be of a configuration for faster installation of cables. Wall thickness(mm) of each of the ducts Excluding rib height shall be 2.9mm +/- 0.3mm. ISO Requirements- ISO 9001, 14001, 18001, complete as per specifications and directions of Engineer-in-charge. (7 way multi utility duct for OFC) 84 Supply of HDPE pipe of size 110mm for distribution system conformingn to latest/ relevant I.S. 4984/1995 Specifications with all jointing materials and specials conforming to latest /relevant I.S. specifications including F.O.R. destination and all taxes and insurance etc. with loading, unloading and Carting up to site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignment and gradient and jointing etc. complete (including testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches) all complete as per instructions of Engineer-in-charge.110mm dia HDPE pipe PN-6 class PE-100 85 Supply of HDPE pipe of size 63mm for distribution system conformingn to latest/ relevant I.S. 4984/1995 Specifications with all jointing materials and specials conforming to latest /relevant I.S. specifications including F.O.R. destination and all taxes and insurance etc. with loading, unloading and Carting up to site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignment and gradient and jointing etc. complete (including testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches) all complete as per instructions of Engineer-in-charge.63mm dia HDPE pipe PN-6 class PE-100 86 RCC Grade M20 using batching plant transit mixer & manual placing ( Side wall, bottom slab for all inspection chamber i.e. storm water, telecom, power, sewer, water) 87 Supply and installation on site - Recessed double seal ofwith a clear opening of750*750 mm DI manhole cover and frame(material- ductile iron grade 500/7) of class B125 having minimum load capacity 125 KN Load as per EN124-2, the top cover( should have 2 no. of keyholes ) as per the design approved by Engineer in chargedesign approved by Engineer in charge. 88 Supply and installation on site - Recessed double seal ofwith a clear opening of750*750 mm DI manhole cover and frame(material- ductile iron grade 500/7) of class D400 having minimum load capacity 400 KN Load as per EN124-2, the top cover( should have 2 no. of keyholes ) as per the design approved by Engineer in chargedesign approved by Engineer in charge. (storm water) 89 Supply and fixing Gully Grates RED 048 GRH – 300* 750mm D.I. GULLY GRATE & FRAME IN D400 LOAD CLASS , as per BS EN 124 Black Bitumen Paint, all complete as per direction of Engineer-in-charge. 90 Constructing rcc rectangular type manholewith a floating coat of neat cement, foundation concrete 1:6:12mix (1 cement : 6 coarse sand : 12 graded brick bats 40 mm nominal size), and making necessary channel in cement concrete of M-25 grade finished with a floating coat of neat cement, all complete as per standard design and instruction of E-I-C. 91 Restoration of water pipeline in case of damage 92 [I] Bill no. 9 - Horticulture / Landscaping works 93 Trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications. 94 Supplying and stacking of good earth at site including royalty but including carriage1km (earth measusred in stacks will be reduced by 20% for payment). 95 Supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment) 96 Mixing earth and manure in specified proportion or as directed. 97 Rough dressing the trenched ground including breaking the clods. 98 Fine dressing the ground 99 Spreading ofmixed good earth and manure in specified proportions as above and in required thickness. 100 Uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation. 101 Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge 102 Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. 103 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth,sides of foundation etc. complete. 104 Providing and stacking of Nauclea cadamba (Kadam) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. 105 Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge. 106 Providing and stacking of Terminalia arjuna of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. 107 Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. 108 Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. 109 Providing and stacking of Ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge.. 110 Providing and stacking of Ficus reginald well branched, bushy of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.. 111 Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushtyshape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.. 112 Providing and stacking of Tradescantia zebrina having in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 113 Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size ofPoly bags & as per direction of the officer-in-charge. 114 Providing and stacking of Asparagus sprengeri of height 30 cm to 45 cm, full of leafy branches in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.. 115 Providing and stacking of Ophiopogon jaburan ( variegated ), full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. 116 Providing and displaying of Croton Petra Bangalore variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. 117 Providing and fixing MS iron tree guard 60 cm dia and 2 metre high above ground level formed of 4 Nos (25 x 6 mm) and 8 Nos (25 x 3 mm) vertical MS riveted to 3 Nos (25 x 6 mm) iron rings in two halves, bolted together with 8 mm dia and 30 mm long bolts including painting two coats with paint of approved brand over a coat of priming, complete in all respects. 118 Street Light Works (Excluding GST) 119 Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P complete in all respect 120 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect. Cat: AAA 121 Supply and laying of 16 sq.mm. 4 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 122 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/termination with GI thimble etc. as required. 123 Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia38mm terminal Dia 12 mm ,outer GIpipe of 16 SWG and inner GI pipe of 12 SWG withHot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. 124 Making Connection of each street light by S/L 1.5 sqmm FRLSH copper wire complete as per Direction of engineer in charge. 125 Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length each ) on RCC foundationincluding the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. 126 Supply & Laying of 63 mm Dia (OD-63 mm & ID- 51 mm Nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers, etc. conforming to IS 14930, part II complete with fitting and cutting, jointing, etc. direct in ground (75 cm below ground level) including excavation & refilling the trench but excluding sand cushioning & protective covering etc, complete as required. 127 Supply and fixing for automatic street light cubical control Juction Box painted with anti-corrosive alkali and acid proof pait consisting of 6 Amps MCB (B - Curve) complete in all respect 128 Supply and fixing of 16 sq.mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 129 Supply and fixing of 40 Amp. capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 130 Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. 131 Supply/ erection of surface mounted decorative pole 4500 mm long having Base plate 300x300x12 mm with the bottom dia 139 mm upto 1 mtr long with the thickness of 3.6 mm and the top dia is 76 mm upto 3.5 mtr. Log. Decorative pole made out of Galvanized iron tube with cast Aluminium embellishments. The poles are painted with Polyturetnane paint. The pole have service window at the bottom on the pole for housing the MCB and terminal strips and as per attached drawings. 132 S/F of Single Arm decorative Bracket 100 mm long made of Cast iron/ Aluminium embellishments painted with Polyturetnane paint. 133 Supply of LED decorative drop down light made of aluminium housing fitted with polycarbonate diffuser having 500 mm dia with 70 w. 134 Supplyandlayingof aluminiumconductorPVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core 135 Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 40 A TPN 136 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 16 sq. mm 137 Supply & Laying of 63 mm Dia (OD-63 mm & ID- 51 mm Nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers, etc. conforming to IS 14930, part II complete with fitting and cutting, jointing, etc. direct in ground (75 cm below ground level) including excavation & refilling the trench but excluding sand cushioning & protective covering etc, complete as required. 138 Supply and Laying 6 swg G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/termination with GI thimble etc. as required. 139 Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia38mm terminal Dia 12 mm ,outer GIpipe of 16 SWG and inner GI pipe of 12 SWG withHot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. 140 Part - B Utility Shifting (Including GST) 141 Converstion of LT Overhead Line by Underground LT Line 142 LT XLPE insulated cable of size 3.5x400 sqmm. 143 LT XLPE insulated cable of size 3.5x240 sqmm. 144 LT XLPE insulated cable of size 3.5x150 sqmm. 145 LT XLPE insulated cable of size 3.5x70 sqmm. 146 9 mtr long stp 147 HDPE Pipe 140mm dia PEB0, PN-6 148 HDPE Pipe 120 mm dia PEB0, PN-6 149 HDPE Pipe 75 mm dia P880, PN-6 150 Aluminium Crimping Lugs 400sqmm 151 Aluminium Crimping Lugs 240sqmm 152 Aluminium Crimping Lugs 150sqmm 153 Aluminium Crimping Lugs 70sqmm 154 6 SWG G.l. wire for earthing along cables. 155 Cable end termination using total double compression brass glands and crimping type Cu. Thimbles for 3.5x400 Sqmm. LT Cable 156 Cable end termination using total double compression brass glands and crimping type Cu. Thimbles for 3.5x240 Sqmm. LT Cable 157 Cable end termination using total double compression brass glands and crimping type Cu. Thimbles for 3.5x150 Sqmm. LT Cable 158 Cable end termination using total double compression brass glands and crimping type Cu. Thimbles for 3.5x70 Sqmm. LT Cable 159 MAIN LT PANEL AT SUB STATION- 400 KVA (Type A-2)lncomer- 1 Set of 800 Amp. TP MCCB with Spreader & Extended handleMetering on lncomer - 1 Set of Digital Ammeter with ASS- 1 Set of Digatal Voltmeter with VSS- 1 Set of LED type Phase lndicating Light (22.5 mm.)with Control MCBsOutgoing- 6 Set of 250 Amp. TP MCCB with Spreader & Extended handte( 5 Nos. + 1 No. for capacitor panel)- 2 Set of 100 Amp. TP MCCB with Spreader & Extended handle 160 MAIN LT PANEL AT SUB STATTON- 250 KVA (Type A-2) lncomer- 1 No. 630 Amp. TP MDO ACB with Inbuilt MPR Release with I onToff tnai.ating LightMetering on lncomer - 1 Set of Digital Ammeter with ASS- I Set olDigital Volt-meLer wirh VSS- 1 Set of LED type Phase Indicating Light (22.5 mm.J with Control MCBs Outgoing - 5 Set of 250 Amp. TP MCCB with Spreader & Exrended handle- 2 Set of 100 Amp. TP MCCB with Spreader & Extended handle flnstallation ofLT Distribution Boards for LT underground system (Type A,B&CJ) 161 Supply , installation, testing & commissioning of outdoor type feeder pillar panetto be made of 2 mm CRCA sheet and covers will be j.6mm CRCA sheet dulypowder coated paint with 300 amps Al. busbar. (Type-B2)lncomer - 250 Amp. TP MCCB - 1 No.Outgoing - 63 Amp. TP MCCB - 5 Nos.lnstallation of LT Distribution Boards forLT underground system (Type-A, B & C) 162 Outdoor type feeder pillar panel to be made of 2 mm CRCA sheet and covers will be 1.6mm CRCA sheet duly powder coated paint with 300 amps Al. busbar. [Type-B3] Incomer - 100 Amp. TP MCCB - 1 No. Outgoing - 63 Amp. TP MCCB - 4 Nos.lnstallation of LT Distribution Boards for LT qnderground system [Tvpe-A, B & Cl 163 Lockable distribution boxes of size 450X400mm with bus bar 100 Amp. TPN to feed upto 10 houses (Type C) 164 XLPE LT Service armoured Cable for single phase,2x6 sq. mm.(pVC armoured Consumer Service Cablel 165 XLPE LT Service armoured Cable for single phase,2x10 sq. mm.(pVC armoured Consumer Service CableJ 166 XLPE LT Service armoured Cable for three phase,4x10 sq. mm.[pVC armoured Consumer Service Cablel 167 XLPE LT Service armoured Cable for three phase,4x1.6 sq. mm.(pVC armoured Consumer Service Cablel 168 XLPE LT Service armoured Cable for three phase,4x25 sq. mm.(PVC armou[ed Consumer Service Cable) 169 PVC PIPE 32 MM DIA 170 PVC PIPE 50 MM DIA 171 Electronic KWH Meter 1PX2W with Box. For single phase consumer 172 Electronic KWH Meter 3PX4W Static meter with Box.For three phase consumer 173 carriage , Laying of 3.5Cx400 sq.mm size LT XLPE insulated cable underground in HDPE pipe size 140 mm dia. 174 carriage, Laying of 3.5Cx150/240 sq.mm size LT XLPE insulated cable underground in HDPE pipe size 1.20 mm dia. 175 carriage ,Laying of 3.5CX70 sq.mm size LT XLPE insulated cable underground in HDPE pipe size 75mm dia. 176 Painting of STP incuding paints [2 ltr red oxide and 2 Ltr Alluminum paint for each pole.l 177 Grouting of ST pole 178 CARTAGE , ERECTION AND DISMENTLING CHARGES 22% OF MATERIALS COST 179 Conversion of 11KV Overhead/Underground Line by 11KV Line Underground 180 11 Kv cable size 3x185 sq.mm XLPE 181 STP 11M-IS 410 SP-55 182 G.l pipe 4 dia 183 TOP channel 100x50x2240 mm 184 HDPE Pipe 160 mm dia PE 80, pN-6 185 Service clamp O/S 186 Clamp for fixing pipe to pole 187 11 Kv cable jointing kit size 3x185 sq.mm XLPE O/D 188 11 Kv cable jointing kit size 3x185 sq.mm XLPE S/T 189 Earthing complete. 190 M.S. Nut & Bolt with washer 191 Bracing angle 65x65x6x2700 mm with clamp 192 Stone Pad 193 Number plates with Clamp 194 Danger board & clamp with bolts & nuts 195 Stay complete 196 G I Barbed Wire 197 carriage , Layrng of 3X185 sq.mm size 11 KV XLPE insulated cable underground in HDPE pipe dia 160 mm. 198 Painting of STP incuding paints (2 Itr red oxide and Z Lt. Allrn inrm pal,1t for each pole.) 199 Grouting of ST pole 200 Grouting of Stay set 201 CARTAGE , ERECTION AND DISMENTLING CHARGES 22% OF MATERIALS COST 202 Conversion of 33KV Overhead/ Underground Line by 33KV Line underground 203 Cable Al. 3x300 sq.mm. XLPE 33 KV 204 STP 11M-IS 410 SP-55 205 G.l pipe 6 dia 206 M.S.Top channel 100x50x2240 mm 207 HDPE Pipe 200 mm dia PE 80, pN-6 208 Service clamp O/S 209 Clamp for fixing pipe to pole 210 Bracing angle 65x65x6x4300 mm with clamp 211 33 KV cable jointing kit 3X300 Se MM outdoor 212 33 KV cable jointing kit 3X300 Se MM Straight Through 213 Earthing of pole by MS earthing rod of 2OX25O0 mm & 6 SWG earthr.ng wire etc. 214 M.S. Nut & Bolt with washer 215 Number plates with Clamp 216 Danger board & clamp with bolts & nuts 217 Stay complete (Stay rod 15X1800mm, Stay wire 5 KG,, Stay clamp, Boult & nut rvith grouting 218 Daner bqard barbed wire includin jumpering 219 carriage , Layrng of 3X300 sq.mm size 33 KV XLPE insulated cable underground in HDPE pipe dia 200 mm. 220 Painting of STP incuding paints (2 Itr red oxide and Z Lt. Allrn inrm pal,1t for each pole.) 221 Grouting of ST pole 222 Grouting of Stay set 223 CARTAGE , ERECTION AND DISMENTLING CHARGES 22% OF MATERIALS COST 224 INSTALLATION OF 250 KVA TRANSFORMER ON DP FOR THE SHIFTING OF 3 No. 250 KVA. 9 No.400 KVA & 3 NO. 630 KVA TRANSFORMER 225 STP 11M-IS 410 SP-55 226 MS channel 100x50x2240 mm 227 SERVICE CLAMP FOR ROUND POLE 228 M.S. BOLT AND NUTS OFF SIZE WITH WASHER 229 L.T. CABLE 3.5OX4OO SO M 230 LTXLPE Insulated,Unarmoured Aluminium Singlc Corc Cable,1x240sq. mm.Sizc 231 LT XLPE Insulatcd,Unarmoured Aluminium Singlc Core Cablc,1x400 sq. mm.Size 232 EARTHING OF 250 KVA T/F WITH G.I. PIP[ 233 EARTHING ROD COMPLET. 234 1 1 KV D.O. FI]SE SETS 235 1 1 KV TPMO 236 D.D. WIRE 70 qs mm 237 250 KVA T/F 238 L.T. CUBICAL B0X complete 239 L,T. CABLE 3.50X240 SQ MM 240 STAY SET COMPLETE, 241 ALUMINIMUM LUG 70 SQMM 242 ALUMINIMUM LUG 240 SQMM 243 ALUMINIMUM LUG 400 SQMM 244 PVC TAPE 245 T/F BUSHING CONNECTOR OF COPPER STRIP 246 Labour , Cartage & Errection Charges and Dismentaling of existing T/F 247 Dismentling and Cartage from site to store Charges 7% (Other Misclenous Charges)
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 4
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
8.
Public Administrative Department #9202569 Technical Bid
Providing And Fixing Necessary Machineries At Buffalo Slaughter House For Daund Municipal Council, Daund. Dist. Pune- 1 A - Modernized Gravity Buffalo / Cattle Slaughter Line Capacity 20 - 25 Per Hour. 2 Providing And Fixing In Position Gravitylinefor Buffalo Slaughterhouse ( Speed - 20-25 Cap / Hr ) 3 Providing And Fixing In Position Ritual Killingbox:1. The One Boxes Will Be Made Up Of Mild Steel2. Structure Of The Killing Box Will Be Ms With Hot Dip Galvanized3. Wheel Of The Killing Box Will Be Ms With Epoxy Painted After Sand Blasting4. Pneumatic Cylinders Will Be Airmax Make Of Different Sizes 10 Nos.5. Pneumatic Fittings Will Be Airmax Make6. Bearing & Housing7. Control Box With Contactors And Relays Of Telemechanic Make18. Approximate Weight – 4500 Kg.11. Approximate Overall Dimension Breadth = 3.00 Meterslength = 3.50 Meters Height = 3.50 Meters 4 Providing And Fixing In Position Halalplatformwithguard:This Should Be Made Up Of Heavy Duty 2” B Class G.I Pipe For Slaughtering The Animals As Per Islamic Halal Method With Side Guard. 5 Providing And Fixing In Position Hoist:The Hoist Shall Be Used For Lifting The Stuck Animals From The Halal Table To The Bleeding Rail The Capacity Of The Hoist Shall Be 1 Tones And Load Lift Of 5.0 Mtrs The Hoist Shall Be Complete With A Rail Trolley. 6 Providing And Fixing In Position Bleedinggravityrail:This Shall Be Mild Steel Of Size 75 X 12 Mm With Top At About 4.5 Mtrs From The Floor And Gradually Sloping. The Complete System Shall Be Fully Supported From The Overhead Beams With Mild Steel Hangers. At About 800 Mm Centre To Centre. The Length And Layout Shall Be Generally As Per The Drawing. The Rail System Shall Be With The Bends And Rail Switches Where Ever Necessary As Per The Layout. 7 Providing And Fixing In Position Bleeding Shackles:These Shall Be Made Of M.S. Properly Designed And Used For Hanging The Animal On The Bleeding Rail For Bleeding After Sticking. 8 Providing And Fixing In Position Transfer Mechanism:This Shall Be Pneumatically Operated Mechanism Transfer Animal From Bleeding Rail To Dressing Rail. This Shall Consist, Pneumatic Cylinders, Valves, Push Buttons Switch . 9 Providing And Fixingin Position Dressinghooks:Dressing Trolleys And Hooks: The Trolleys Shall Be Of Mild Steel Capacity To Carry Required Load. This Shall Be With Bearing For Smooth Travel During Dressing. The Hooks Shall Be Of Food Grade Stainless Steel . 10 Providing And Fixing In Position Dressing Gravity Rail:This Shall Be Mild Steel Flat Of Size 75 X 12 Mm With Top At About 4.5 Mtrs From The Floor And Gradually Sloping. The Complete System Shall Be Fully Supported From The Overhead Beams With Mild Steel Hangers At About 800 Mm Centre To Centre. The Length And Layout Shall Be Generally As Per The Drawing. The Rail System Shall Be With The Bends And Rail Switches Where Ever Necessary As Per The Layout. The Rail System Shall Be Used From All Major Operations Such As Evisceration, Splitting, Washing, Uartering And Weighting. 11 Providing And Fixing In Position White Offaltraywithchute:This Shall Be Mild Steel 18 Gauge Sheet. The Conveyor System Shall Be With The Bends And Chute Switches Where Ever Necessary As Per The Requirement 12 Providing And Fixing In Position Red Offal Rail:This Shall Be Mild Steel Of Size 75 X 12 Mm Supported From The Overhead Beams With Mild Steel Hangers At About 800 Mm Centre To Centre. The Length And Layout Shall Be Generally As Per The Drawing. The Rail System Shall Be With The Bends And Rail Switches Where Ever Necessary As Per The Layout 13 Providing And Fixing In Position Overheadscale :This Shall Be Scale Cap 500 Kg. On The Rail. 14 Providing And Fixing In Position Fixedplatforms ( Operator’Splatform ) : This Shall Be 1.0 Meter Wide Long & Height Where Ever Necessary As Per The Layout And With. It Shall Have Non-Skidding Topaluminum Plate.13.1 – Transfer13.2 – Tail & Bung13.3 - Pre De-Hiding13.4 – Brisket & Evisceration- Red & White Offal’S13.5 – Vet Inspection13.6 –Trimming 15 Providing And Fixing In Position Pneumaticplatforms:The Construction Shall Be Of Mild Steel With Non – Skid Surface Preferably Of Dixon Channels. Proper Railing Shall Be Provided On Two Sides. The Unit Shall Be Heavy Duty, Self Supporting And Fixed At A Convenient Operation Location.14.1 - De-Hiding-214.2 - Splitting -1 16 Providing And Fixing In Position Sterilizerswithwashbasins:These Shall Be Made From 20 Gauge Mild Steel With Necessary Valves, With Proper Insulation And Overflow Connection To The Drain.Halal -1 Fore Legs-1 Hind Legs-1Evisceration & Red Offals-1 Vet Inspection -1Trimming- 1 17 Providing And Fixing In Position Quartering System:This Shall Be Pneumatically Operated Quartering System Carcass To Dressing Rail. This Shall Consist, Pneumatic Cylinders, Valves, Push Buttons Switch . 18 Providing And Fixing In Position Carcass Washing Cabinet:This Shall Be Mild Steel 18 Gauge Sheet . The Cabinet Should Be Water Spray System Shall Be With The Bends And Shower Switches Where Ever Necessary As Per The Requirement 19 Providing And Fixing In Position Brisket Saw :To Facilitate Easy Cutting Of Brisket Bone Of De-Hided Carcass For Evisceration Operation. This Shall Consist Motorized Blade, Power Pack Enclosed In Aluminum Body. This Should Be Conveniently Suspended From Overhead Structure On Spring Balancer The Capacity Of The System Should Be To Suit The Through Output Of 40-50 Animals Per Hr. 20 Providing And Fixing In Position Splitting Saw:Beef Splitting Saw Powered By Adequate Capacity Direct Drive Motor For Splitting Of The Carcass While On Rail Shall Be Provided. The Saw Shall Be Heavy Duty Reciprocating Type With About 127 Inch Long Saw Blade. Alternatively, Circular Saw Also May Be Quoted. The Saw Design Shall Permit Vertical Splitting Of 50 Beef Carcasses Per Hour. The Whole Assembly Shall Be Suspended From Overhead Cross Beams By A Balancer. 21 Providing And Fixing In Position Horn Cutter :This Shall Be Hydraulic Operated Mechanism To Transfer Animal To Cut The Horns, Hoovesof Animals. This Shall Be Electric Or Hydraulic Unit Having Power Output 4.5 Hp / 5.5 Hp Rated Voltage Of 230 / 440V, 3 Phases, And 50 Cycles. This Shall Have Capacity To Operate 40-50 Animals Per Hour. This Unit Shall Be Complete With Spring Balancer, Hydraulic Oil Hose And Hydraulic Power Pack Complete. 22 Providing And Fixing In Position Trolleys ( Horns 1, Skin 1 ) These Shall Be Of Size 1.0 M X 0.75 M Deep And Made Shall Be Fabricated Form Mild Steel. Front Wheel Shall Be Of 150 Mm With Swiveling Castor And Rear Two Wheels Of 150 Mm Die. They Shall Have, Sloping Bottom, 25 Mm Drain Connection With Plug And A Handle. 23 Providing And Fixing In Position Highpressurewashingpumpforcarcass Washingcabinet:Pump Should Be 2 Hp. To Be Connected To Your Tank. 24 B - Larrage Shed And Railing For 340 Animal 25 Providingstructuralsteelworkin Trusses, Othersimilartrussedpurlins Andmemberswithallbracing, Gusset Plates, Etc.Asperdetaileddesignand Drawingorasdirectedbyengineer-In Chargeincludingcutting, Fabricating , Hoisting, Erectingandfixingin Position, Making Riveted / Bolted / Weldedconnections Andprovidingandfixingm.S.Pipe Railinghaving1.0Mheightconsisting 75Odroundpipex3mmthickand Providingandfixingm.S.Gate4ftx 4Ftforeverycompartmentwith 75Mmdim.Spipemediumclassand Painting2coatsofoilpaintover 1Coatofanticorrosivepaintof Approvedcolour Andshadeincluding Costofalllabour, Transportingbends Tocurvedshape, Etc.Complete ( Size - 125 Ftx 81Ft ) 26 Providingcorrugatedpowdercoated Sheetroofingincludingvertical / Curvedsurfacefixedwithpolymer Coatedjorlhooks, Boltsandnuts8 Mmdiameterwithbitumenandg.I. Limpetwashersorwithg.I.Limpet Washersfilledwithwhitelead, Includingacoat Ofapprovedsteel Primerandtwo Coatsofapproved Paintonoverlappingof Sheets Complete ( Uptoanypitchin Horizontal / Verticalorcurved Surfaces ) , Excludingthecostof Purlins, Raftersandtrussesand Includingcuttingtosizeandshape Whereverrequired. 27 Drainiscover:Providingandfixingm.S.Flatpatti 25Mmx5mmthickandjalitype Draincover130ftx1ftand Providingangleframeand Painting 2Coatsof Oilpaintover1coatof Anticorrosivepaintofapproved Colourandshadeincludingcost Ofall Labour, Transportingbendstocurved Shape, Etc.Complete 28 C - Modular Chillerroomforfreshmeat 29 Construction Of Modular Chillerroomforfreshmeat ( 60 X 40 X 17 Size Chamber, App 250 Mt Capacity Chamber, Storage For Incoming Product Of Fresh Meat, Pull Down Time -24 Hrs, Maintain Room Temperature 0 To 5 Deg C, Walls And Ceilings Of Chamber - 100 Mm Puff Panels With 0.5Mm Ppgi Sheet On Both Sides Puff Density: 40 Kg / M3 Cfc Free Blowing Agent, Connection Of Panels - All Panels With Cam Locks For Wall To Wall And Ceiling To Ceiling, 60 Mm Puff Slab [ Kota Flooring In Customer Scope ] , 60 Mm Puff Door With Standard Accessories Of Size: 4’ W X 12’H – Qty – 2 Nos, Refrigerating Machine - 35000 Btu At Evap Temp Of -8 Deg C X 3 Machine Per Chamber Total – 3 Nos, Evaporator And Condenser- Designed With Copper Tubes And Aluminium Fins [ Air Cooled Unit ] Evaporator Body In Al, Emmerson – Hermatic Reciprocating Compressor, Expansion Valve / Capilliary, Sub Zero Fully Automatic & Digital Controllers, 8.0 Kw Per Machine / 3 Phase Electrical Requirement. ) 30 Chiller Room Panels As Per Annexure-1 In 100Mm Panels For Walls And Ceilings 80Mm Puff Slab For Flooring [ Kotafloor Incustomerscope ] 12’H X 4’W Manual Sliding Puff Door – 2 Nos10 Kw At Evap Temp Of -8 Deg C X 3 Refrigerating Machinesmake:Carriercopper Pipes With Insulation – 20’ Per Machine Complete With Supply Installation And Commissioning 31 Chillerroomrail:This Shall Be Mild Steel Flat Hot Deep Galvanizing Of Size 75 X 12 Mm With Top At About 3.70 Mtrs From The Floor. The Complete System Shall Be Fully Supported From The Overhead Beams With Mild Steel Hangers At About 1Mtr Centre To Centre. The Length And Layout Shall Be Generally As Per The Drawing. The Rail System Shall Be With The Bends. 32 Changeoverswitch:This Shall Be Made Up Of Mild Steel Flat Hot Deep Galvanizing. The Changeover Switches System Shall Be Used For Carcass Hanging In Chilling Room All Major Operations Such As Chilling Rail. 33 D - Air Compressor And Electric Work 34 Providing & Commissioning Atlascopcomakeaircompresso Model: G15laff7.5Tmair Compressor [email protected] Pressurewithinbuiltrefrgerationdryer With15kw / 20Hp Motor 35 Electricalwork:Theelectrical Works Includes Provisionofpowerrequirementofallequipment’S Andlightingcontrol. Thescope Ofworkis Toprovidingand Fixingofcabling, Metering, Steeringboards, Exhaustfans, Equipment’Scontrolboards / Panels, Earthling-Etc., Electricalsubstationtobe Providedbidderasrequiredforthe Project.Theentireelectrical Work Shouldbecarriedoutas Pernational Electricalcode &Nationalbuildingcodes Withapprovedmakesandmodels 36 320Kvacumminssoundproofdiesel Generatorset:Threephasealternatorofferedcomewiththreesingle-Phasewindings With Brushlessalternatorsandgenerator Headssoastoprovideforsuitableusage. Providingforvariablespeed&Variable Kw Output, Thegeneratoralsocomes With User Friendlycontrolpanelcomprising Digitalautomaticvoltage Regulator, Diodebridgeforconvertingactodc, Key Boardforprogrammingdesiredfunctional Parametersandothers.Features:Provide For Constant Dc Voltage At Terminals User Settable Dc Output Voltage Battery Current & Overall Current Parameters Among Others. 37 Supplyerectionandcommissioningof11kv Htmeteringcubicalwithcablejointingkit, 9 Nosearthingetc 38 Erection, Testingandcommissioningofpole Mounteddistributiontransformersub-Station750kva, 11 / 0433Kvon9mrsjpole 39 Erection, Testingandcommissioningof11kv Lineusing9mrsjpoles, Weaselconductor Withprotectiveguarding 40 Providing And Fixing In Position Feederbay 41 Labour Charges For Air Compressor And Electric Work 42 E - Effluent Treatment Plant. 43 Providing & Commissioning C.I. Twin Lobe Positive Displacement Air Blower For Areation Tank & Collection Tank Of Capacity 50 M3 / Hr @ 4500 Mm Wg. 44 Providing & Commissioning Foot Mounted C.I. Tefc Sq., Cage Induction Motor, Suitable For 450 Volts, 50 Heads Size, 3 Phase A.C Supply With Ip 55 Protection And Class ‘B’ Insulation Suitable For 43 0 C Ambient Temperature. 45 Providing & Fixing In Position Hdpe / Pvc Perforated Pipe For Air Grid In The Equilastion Tank & Aeration Tank. 46 Providing & Commissioning C.I. Centrifugal, Self Priming Effluent Transfer Pump Of Capacity 2.9 M3 / Hr @ 12 M Head. 47 Providing & Commissioning Foot Mounted C.I. Tefc Sq, Cage Induction Motor, Suitable For 450 Volts, 50 Heads Size, 3 Phase A.C Supply With Ip 55 Protection And Class ‘B’ Insulation Suitable For 430C Ambient Temperatures. 48 Providing & Commissioning C.I. Horizontal Centrifugal, Self Priming For Return Sludge Pump Of Capacity 2.9 M3 / Hr @ 10 M Head. 49 Providing & Commissioning Foot Mounted C.I. Tefc Sq, Cage Induction Motor, Suitable For 450 Volts, 50 Heads Size, 3 Phase A.C Supply With Ip 55 Protection And Class ‘B’ Insulation Suitable For 430C Ambient Temperatures For Return Sludge Pump 50 Providing & Commissioning C.I. Horizontal Centrifugal, Self Priming For Filter Feed Pump Of Capacity 2.9 M3 / Hr @ 20 M Head. 51 Providing & Commissioning M.S Epoxy Painted Internally With Different Grades Of Sand Media Of Type Vertical, Multi Media For Dual Media Filter Having Capacity 500 Mm Dia X 1250 Mm Hos. 52 Providing & Commissioning M.S Epoxy Painted Internally With Activated Carbon Of Type Vertical, Activated Carbon Media For Activated Carbon Filter Having Capacity 500 Mm Dia X 1250 Mm Hos. 53 Providing And Fixing In Position M.S Epoxy Painted Rake Type, Coarse Bar Screen 54 Providing And Fixingin Position Hdpe For Interconnecting Piping & Pp For Interconnecting Valves 55 Providing And Fixing In Position Hdpe Vertical, Open Top Hypochlorite Dosing Tank Of Capacity 50 Ltr 56 Providing And Fixing In Position Pp Vertical Open Top Hypochlorite Dosing Pump Of Capacity 0 - 6 Lph 57 Providing And Fixing In Position Hdpe Vertical Open Top Poly Dosing Tank Of Capacity 50 Ltr. 58 Providing And Fixing In Position Pp Vertical Open Top Poly Dosing Pump Of Capacity 0 - 6 Lph 59 Providing And Fixing In Position Hdpe Vertical Open Top Alum Dosing Tank Of Capacity 50 Ltr. 60 Providing And Fixing In Position Pp Vertical Open Top Alum Dosing Pump Of Capacity 0 - 6 Lph 61 Providing And Fixing In Position Ss 100 Rpm Slow Speen Agitator For Flash Mixer Of Capacity 0.5 Hp With Gear.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 4
Maharashtra View Result →
9.
Educational and Research Institute #9196070 Technical Bid
Tender For Printing and Supply of Answer Sheets Library Books , Answer Sheets , Fundamentals Of Probability & Statisticss C Gupta & V K Kapoorsultan Chand & Sons , Introduction To Probability & Statisticsseymour Lipschutz & John Schillertata Mcgraw Hill Edition (Schaums Outlines) , Strength Of Materialsr . K. Rajputs Chand Publisher , Strength Of Materialsdr. B. C. Punmialaxmi Publication, New Delhi , Mechanics Of Materialsrc Hibblerpearson Education India , Hydraulics And Fluid Mechanics Including Hydraulics Machines Dr. P.N. Modi & S.M. Sethstandard Book House , Surveying, Volume-Idr. B. C. Punmialaxmi Publication, New Delhi , Surveying, Volume-Idr. K R Arorastandard Book House , Building Materialss K Duggalnew Age International Publisher , Iks: The Knowledge System Of Bharataprof. Bhag Chand Chauhangaruda Prakashan , Vedic Physicskeshav Dev Vermamotilal Banarasidas Publishers , Operations Researchj K Sharmatrinity Press (Imprint Of Laxmi Publications) New Delhi , Operations Researcher. P K Gupta & Dr. Ds Hiras. Chand & Company Pvt. Ltd., Ram Nagar New Delhi , Artificial Intelligence: Building Intelligent Systemsparag Kulkarni And Prachi Joshprentice Hall India Learning Private Limited , Theory Of Structures. Ramamrutham & S. Narayandhanpatrai Publication , Structural Analysis- Iss Bhavikattivikas Publishing House , Soil Mechanics And Foundation Engineeringb.C. Punmia, Ashok Kumar Jain & Arun Kumar Jainluxmi Publications , Soil Mechanics In Engineering Practicekarl Terzaghi, Ralph B Peck , Gholamreza Mesriwiley India Pvt Ltd , Soil Mechanics And Foundation Engineeringdr K R Arorastandard Publishers , Surveying, Volume-Iidr.B C Punimalaxmi Publication, New Delhi , Engineering Surveying-Vol-Iidr K R Arorastandard Publishers , Remote Sensing And Gisbasudeb Bhattaoxford University Press India , Fundamentals Of Remote Sensinggeorge Joseph And C Jeganathanthe Orient Blackswan , Remote Sensing And Image Interpretation, 6Th Editionchipman, Lillesand , Kieferwiley India Pvt Ltd , Building Constructionb.C. Punmia, Ashok Kumar Jain & Arun Kumar Jainluxmi Publications , The Text Book Of Building Constructions. P. Arora And S.P. Bindradhanpat Rai Publications , Reinforced Concrete Designdevdas Menontata Mcgraw Hill , Reinforced Concrete: Limit State Designa.K. Jainnem Chand & Brothers, Roorkee , Limit State Design Of Reinforced Concrete (As Per Is 456:2000)Bc Punmia, Ashok Kumar Jain And Arun Kumar Jainluxmi Publications , Structural Analysis- Iiss Bhavikattivikas Publishing House , Structural Analysisdevdas Menonnarosa Publication , Flow In Open Channelsk. Subramanyatata Mcgraw Hill , Open-Channel Hydraulicsven Te Chowthe Blackburn Press , Flow Through Open Channelskg Ranga Rajutata Mcgraw Hill , Water Supply Engineeringdr. B.C. Punmia, Er. Ashok K. Jain, Dr. Arun K. Jainlaxmi Publications , Environmental Engineering Water Supply Engineering - Vol.1Santosh Kumar Gargkhanna Publisher , Highway Engineeringkhanna & Justonem Chand & Bros , Principles And Practices Of Highway Engineeringl.R. Kadiyali, N B Lalkhanna Publisher , Advanced R C C Design (R C C Vol. 2)S.S. Bhavikattinew Age International Publishers , Design Of Reinforced Concrete Structuress Ramamruthamdhanpatrai Publication , Text Book Of Railway Engg.Sc Suxenadhanpatrai Publication , Airport Planning & Designkhanna & Aroranem Chand Publications , Environmental Engineeringhoward S. Peavy?Mcgraw Hill Education , Environmental Engineering Water Supply Engineering - Vol.Iisantosh Kumar Gargkhanna Publisher , Engineering Hydrologyk Subramanyamcgraw Hill , Engineering Hydrologyrajesh Srivastava And Ashu Jainmcgraw Hill , Hydrology: Principles, Analysis, Designhm Raghunathnew Age International Publishers , Fundamentals And Applications Of Rock Mechanicsdevashis Devphi Learning , Engineering And General Geologyparbin Singhsk Kataria & Sons , Engineering Geologysubinoy Gangopadhyayoxford University Press , Rock Mechanics For Engineersb P Vermakhanna Publishers , Concrete Technology, Theory And Practicem.S. Shetty & A.K. Jains. Chand Publisher , Concrete Technology, Theory And Practicess Bhavikattiik International Publishing House Pvt. Ltd. , Properties Of Concretenevillepearson Education India , A Textbook Of Fluid Mechanics And Hydraulic Machinedr R.K. Bansallaxmi Publications (P) Ltd , A Textbook Of Hydraulic Machinesr.K. Rajputs Chand & Co Ltd , Design And Drawing Of Steel Structuresss Bhavikattidreamtech Press , Design Of Steel Structures S K Duggalmcgraw Hill Education , Estimating And Costing In Civil Engineering Theory And Practiceb.N. Duttacbs Publishers And Distributors Pvt. Ltd. , Estimating, Costing, Specification And Valuation In Civil Engineeringm. Chakrabortim.K. Publishers And Distributors , Irrigation Engineering & Hydraulic Structuressk Gargkhanna Publishers , Irrigation And Water Power Engineeringbc Punmia, Ashok Kumar Jain And Arun Kumar Jainlaxmi Publications , Hydrology And Water Resource Engineeringsk Gargkhanna Publishers , Construction, Planning, Equipments And Methodspeurify And Schexnayder And Shapiratata Mcgraw Hill Higher Education. , Project Planning And Control With Pert And Cpmb.C. Punmia And K.K. Khandelwallaxmi Publications (P) Ltd , Solid And Hazardous Waste Managementm.N Raobs Publication , Dynamics Of Structuresa K Choprapearson Education , Earthquake Resistant Design Of Structuressk Duggaloxford University Press , Ground Improvement Techniquesb C Chattopadhyaya, J. Maityphi Learning , Environmental Impact Assessment Methodologiesanjaneyulu Yerramilli (Author), Valli Manickambs Publications / Bsp Books , Design Of Bridgesn Krishna Rajuoxford & Ibh Publishing Pvt Ltd , Essentials Of Bridge Engineeringd Johnson Victoroxford & Ibh Publishing Pvt Ltd , Handbook On Concrete Reinforcement And Detailingbureau Of Indian Standardsbureau Of Indian Standards , Geotechnical Engineering_: Principles And Practices Of Soil Mechanics And Foundation Engineeringv.N.S.Murthycbs Publishers And Distributors New Delhi , Limit Analysis And Soil Plasticitychencenage Learning India Edition , Soil Testing In Theoryand Practice Vol 11Geotechnical Testing And Instrumentationalam Singhcbs Publishers And Distributors New Delhi , Soil Lab Manauldascenage Learning India Edition , Principles Of Foundation Engineeringdascenage Learning India Edition , Principles Of Geotechnical Engineeringdascenage Learning India Edition , Textbook Of Geotechnical Engineeringdascenage Learning India Edition , Geotextiles-Emerging Trendsg. Venkatappa Rao & K Balankerala State Coir Crop., Allpazha , Reinforced Concretei.C. Syal And A.K. Goela.H. Wheeler And Co. Delhi , Reinforced Concrete Designs.N. Sinhatata Mcgraw Hill , Concrete Technologym.S.Shettys.Chand Publisher , Plasticity In Reinforced Concretechencenage Learning India Edition , Concret Lab Manaulm.L. Gambhirtata Mcgraw Hill , Concrete Lab Manaulbureau Of Indian Standardspublishing House New Delhi , Theory Of Beam-Columns, Volume 2: Space Behavior And Designchencenage Learning India Edition , Plain And Reinforced Concrete Vol.Iijai Krishna & O.P.Jainnem Chand & Bros Roorkee , Limit State Design And Reinforced Concretep.C. Vargheseoxford And Ibh Publishing Pvt Ltd , Design Of Reinforced Concrete Structuresm.L.Gambhirstandard Publishers Distributors , Properties Of Concretea.M.Nevillepearson Education India , Earthquake Resistant Design Of Structuresb.L. Guptastandard Publishers , Earthquake Resistant Design Of Structuresaggarwal And Shrikhandeprentice Hall Of India , Earthquake Resistant Building Constructionneelam Sharmas.K.Kataria And Sons , Earthquake Resistant Design Of Structuresagarwal Pstandard Publishers And Distributors , Analysis &Design Of Substructures (Limit State Design)Swami Saranstandard Publishers And Distributors , Geotechnical Engineeringc.Venkatramaianewage International Publisher, Newdelhi , Gate 2025-Civil Engineering-Gk Publications , Ese-2025 Preliminary Exam: Civil Engineering Objective Solved Paper Vol-1Made Easymade Easy Publications , Ese-2025 Preliminary Exam: Civil Engineering Objective Solved Paper Vol-2Made Easymade Easy Publications , Gate-2025: Civil Engineering Previous Year Solved Papersmade Easymade Easy Publications , Gate 2025-Civil Engineeringies Mastersies Masters Publications , A Handbook On Civil Engineeringmade Easy Editorial Boardmade Easy Publications , Civil Engineering For Competitionsr.Agorkhanna Publishers , Ssc-Je 2025 Civil Engineering Previous Years Topic Wise Objective Detailed Solution With Theoryies Master Teamies Master Publications , Ese 2025 Civil Engineering Topicwise Solved Paper-Iies Master Teamies Master Publications , Ese 2025 Civil Engineering Topicwise Solved Paper-Iiies Master Teamies Master Publications , Ssc Je Civil Conventional Papersies Master Teamies Master Publications , Ssc : Je Civil Engineering(2024) - Previous Year Conventional Solved Papers- 2Made Easy Teammade Easy Publications , Ese 2025 Mains Examination Civil Engg Conv Paper Imade Easy Teammade Easy Publications , Ese 2025: Mains Examination: Civil Engineering Conventional Paper - Iimade Easy Teammade Easy Publications , Gate 2025: Engineering Mathematics For Gate And Ese (Prelims)-Theory And Previous Year Solved Papersmade Easy Teammade Easy Publications , Gate 2025 : Reasoning & Aptitude For Gate And Ese (Prelims) - Theory And Previous Year Solved Papersmade Easy Teammade Easy Publications , General English For Gate And Psus: 2025Made Easy Teammade Easy Publications , Analysis Of Electric Machinery And Drive Systempaul C. Krause, Oleg Wasynczuk, Scott D. Sudhoffwiley , Generalized Theory Of Electrical Machinesp.S. Bimbhra,Khannapublishers,Delh , Power Electronics ( 7Th Edition (1 January 2022))P.S. Bimbhrakhanna Publishers , Power Electronics And Variable Frequency Drive- Technology And Applicationbose. B.K.Ieee Press, Standard Publisher And Distributors, 2001 , Digital Design,M. Morris Manoprentice Hall Of India , Modern Digital Electronicsr.P.Jain,Tmh , Engineering Circuit Analysiswiliamhayt And Jack Kemmerlytmh , Circuits And Networks- Analysis And Synthesisa.Sudhakar And S.P.Shyam Mohantmh , Electric Machineryfitzgerald&Kingsleymgh , Electrical Machineryp.S Bimbhrakhanna Publishers , Electrical Measurements And Measuring Instrumentsa.K. Sawhneydhanpat Rai & Co. , Power System Engineering | 3Rd Editiond. P. Kothari;I. J. Nagrathmcgraw-Hill; , Electrical Power Systems (Eighth Edition (1 January 2022))C L Wadhwanew Age International Private Limited , Modern Digital And Analog Communication Systemsb.P. Lathioxford , Communication Systemssimon Haykinwiley , Power Electronics ( 7Th Edition (1 January 2022))P.S.Bimbhrakhanna Publishers , Linear Control Systemb.S. Mankekhanna Publishers , Control System Engineeringm Gopal And I J Nagrathnew Age International Private Limited , Generation Of Electrical Energydr.B.R.Guptas.Chand , A Course In Electrical Powera.K. Chakrabathi,Soni Guptadhanpat Rai Publishier , High-Voltage Engineering | 6Th Editionbhatnagarmc-Graw Hill Education , High Voltage Engineering Fourth Edition (1 December 2020)C L Wadhwanew Age International Private Limited , Engineering Electromagnetichayttmh , Principles Of Electromagneticsmathew N.O Sadikuoxford , Thyristor Based Facts Controllers For Electrical Transmission Systemsr Mohan Mathur And Rajiv K Varmaajohn Wiley & Sons Inc. Publication , Understanding Facts: Concepts And Technology Of Flexible Ac Transmission Systemsnarain G. Hingoraniwiley India Pvt Ltd , Non-Conventional Energy Resources | 3Rd Editionb.H. Khanmcgraw Hill Education India Private Limited , Robotics And Controlr Mittle (Author), I Nagrathmcgraw Hill Education , A Course In Electrical Powerj.B Guptak Kataria& Sons , Microprocessor And Microcontrollerb Ramdhanpat Rai Publications , Microprocessor Architecture, Programming And Applications With The 8085 6/Eramesh Goankarpenram International Publishing India Pvt Ltd. , Modern Power System Analysis | 5Th Editiond P Kothari (Author), I J Nagrath (Author), R K Saketmcgraw Hill , Power System Analysisj.J. Grainger, W.D. Stevensonmc-Graw Hill Education , Fundamentals Of Electrical Drivesg.K. Dubeyalpha Science International Ltd, 2001 , Digital Signal Processing - 7Th Ednramesh Babuscitech Publications (India) Pvt. Ltd. , Digital Signal Processing : Principles, Algorithms, And Applications 4 Editiondimitris G Manolakis, John G. Proakispearson , Utilization Of Electric Energy: Including Electric Drives And Electric Tractiontarlok Singhs.K. Kataria & Sons , Art And Science Of Utilisation Of Electrical Energyh. Pratabdhanpat Rai & Co. , Electric Illuminationjohn O. Kraehenbueshljohn Wiley & Sons , Introduction To Artificial Neural Systemjacek M Zuradajaico Publishing House , Neural Network- Algorithm, Applicationsand Programming Techniquej.A. Freemanaddison Weley , Handbook Of Energy Auditsabbi, Y.P. And Jains.Teri Press, , Power Qualitybipin Singh Simmi P. Burmans.K. Kataria And Sons , Power Qualityc. Sankarancrc Press , Non-Conventional Energy Resourcesg.D Rai , Electrical Machine Designa.K. Sawhneydhanpat Rai , Power Station Designm.V. Deshpandephi Publication. , Testing , Commissioning , Operation And Meintenance Of Electrical Equipments. Raokhanna Publishers , Power System Planningr.L. Sullivantata Mcgraw Hill Publishing Company Ltd, 2012 , Power Electronics : Circuits Devices And Applicationsm.H. Rashidprencetice Hall Of India Ltd. , 2004 , Hp General Knowledge (3Rd Edition)Suresh Jokta And Vikash Kumarjokta Academy , Atomic Habitsjames Clearrandom House Business Books , Harry Potter Complete Book Seriesj.K.Rowlingharry Potter Books Set , Indian Gk 2024Lucentlucent Publication , Autobiography Of A Yogiparamhansa Yoganandayogoda Satsanga Society Of India , The Life Of Indira Nehru Gandhikatherine Frankharper Perennial , The Art Of Happinessdalai Lamahodder Paperbacks , Hitchhikers Guide To Galaxy Complete Setdouglas Adamspanmacmillan , The Great Gatsbyf.Scott Fitzgeraldvayu Education Of India , Hamletwilliam Shakespearemaanu Graphics , To Kill A Mockingbirdharper Leearrow Books Ltd , Pride And Prejudicejane Austenfingerprint! Publishing , 500Stephanie Meyermaclehose Press , The Subtle Art Of Not Giving A F*Ckmark Mansonharpercollins Publisher India Pvt Ltd , A Song Of Ice And Firegeorge R.R . Martinharpercollins Publisher India Pvt Ltd , Theory Of Everythingstephen Hawkingjaico Publishing House , Tomb Of Sandgeetanjali Shreepenguin Random House India Pvt. Ltd , The Lamplightersemma Stonexpicador Publishers , Mahasamar (1-9)Narendra Kohlivani Prakashan , The Palace Of Illusionschitra Banerjee Divakarunipicador India , Books By Premchand Complete Setprem Chandmaple Press , Bhagwat Geeta (Hindi)Iskconbhaktivedanta Book Trust , The Bhagwat Gita : Symphony Of The Spirit (Hindi)Rr Varmafingerprint! Publishing , Persuationjane Austonmaple Press , The Martianandy Weirballantine Books , Guiderk Narayanindian Thought Publications , Rich Dad Poor Dadrobert T. Kiyosakiplata Publishing , The Story Of My Lifehelen Kellerfingerprint! Publishing , 100 Great Business Ideasjeremy Kourdiembassy Books , The Worlds Best Business Ideasian Wallisjaico Publishing House , Idea To Executionnick Sonnerberglioncrest Publishing , Profit Firstmike Micholowiczportfolio Publisher , Surely Youre Joking Mr Feynmanrichard Feymanvintage Publishing , Side Hustlechris Guillebeaupanmacmillan , Invent It,Sell It,Bank Itlori Greinerballantine Books , Before You Start Uppankaj Goyalfingerprint! Publishing , The Secretrhonda Byrnesimon & Schuster Uk , Last Queenchitra Banerjee Divakaruniharpercollins Publisher India Pvt Ltd , How To Patent An Idea In Indiaprasad Karhadindependently Published , The Final Adventures Of Professor Shonkusatyajit Raypenguin Random House India , Sapiensyuval Noah Hararivintage Books , Shiva Trilogy Setamish Tripathiharpercollins Publisher India Pvt Ltd , A Thousand Splendid Sunskhaled Hosseinibloomsbury Paperbacks , Geetanjliravindernath Tagorerajkamal Prakashan Pvt. Ltd , Little Womenlouisa May Alcottvintage Childrens Classics , Sita : An Illustrated Retelling Of Ramanyadevdutt Patnayakpenguin India , The Girl Who Drank The Moonkelly Barnhillalgonquin Young Readers , The Perfect Murderruskin Bondrupa Publications India , Blue Umbrellaruskin Bondrupa Publications India , 7 Secrets Of Shivadevdutt Patnayakwestland Books , The Palace Of Illusionschitra Banerjee Divakarunipicador India , Jayadevdutt Patnayakpenguin India , My Gitadevdutt Patnayakrupa Publications India , Yoga Mythologydevdutt Patnayakharpercollins Publisher India Pvt Ltd , The Autobiography Of Benjamin Franklinbenjamin Franklinfingerprint! Pub , My Inventions: The Autobiography Of Nikola Teslanikola Teslaingram Short Title , The Immmortals Of Meluha (Hindi)Amish Tripathiharper Hindi , The Secret Of Nagas (Hindi)Amish Tripathiharper Hindi , Scion Of Ikshvakuamish Tripathiharpercollins Publisher India Pvt Ltd , The Oath Of The Vayuputras (Hindi)Amish Tripathiharper Hindi , War Of Lankaamish Tripathiharpercollins Publisher India Pvt Ltd , Sitaamish Tripathiharpercollins Publisher India Pvt Ltd , Raavan: Enemy Of Aryavartaamish Tripathiharpercollins Publisher India Pvt Ltd , Legend Of Suheldevamish Tripathiharpercollins Publisher India Pvt Ltd , Suheldev And The Battel Of Baharaichamish Tripathiharpercollins Publisher India Pvt Ltd , Immortal Indiaamish Tripathiharpercollins Publisher India Pvt Ltd , Dharma:Decoding The Epicsamish Tripathiharpercollins Publisher India Pvt Ltd , Dharmayoddha Kalki: Avatar Of Vishnukevin Missalfingerprint! Publishing , An Era Of Darknessshashi Tharooraleph Book Company , Foundationisaac Asimovharpervoyager , The Da Vinci Codedan Browncorgi Books , Deception Pointdan Browncorgi Books , 40 Rules Of Loveelif Shafakpenguin Random House India , Contactcarl Saganorbit Books , Elon Muskashlee Vancevirgin Books , Into The Wildjon Krakauerpanmacmillan , Shoe Dogphil Knightsimon & Schuster , The Upanishadsswami Paramanandaprakash Books India , Reflections: Swami Vivekanandaswami Vivekanandaom Books International , City Of Djinns: A Year In Delhiwilliam Dalrymplepenguin Books , The Age Of Kali: Indian Travels And Encounterswilliam Dalrymplepenguin India , The Power Of Your Subconscious Mindjoseph Murphysrishti Publishers & Distributors , Naruto, Volume 1Masashi Kishimotosimon & Schuster India , Naruto, Volume 2Masashi Kishimotosimon & Schuster India , Naruto, Volume 3Masashi Kishimotosimon & Schuster India , Buddhadeepak Chopraharpercollins Publisher India Pvt Ltd , Sophies Worldjostein Gaarderorion Publishing Group , Certificate Physical And Human Geography (Indian Edition)Goh Cheng Leong (Oxford University Press)Oxford University Press , A Brief History Of Modern India(2022 Edition)Rajiv Ahir (Spectrum Books Pvt. Ltd)Spectrum Books Pvt. Ltd. , Oxford Student Atlas For India(4Th Edition)Oxford University Pressoxford University Press , Answer Book,10001 Fast Facts About Our Worldhector Sierranational Geographic , Knowledge Encyclopedia Art And Architecturewonder House Bookswonder House Books , 1001 Inventions That Changed The World Since 26,00,000 Bcehachette Book Publishing India Pvt Ltdhachette Book Publishing India Pvt Ltd , National Geographic Know Your Worldnational Geographicimpulse Marketing, 609, Elegance Tower, Jasola District Center, New Delhi ,India , Introduction To Upanishadsacharya Prashantprashantadvait Foundation , Think On These Thingsj. Krishnamurtikrishnamurti Foundation India , Freedom From The Knownj. Krishnamurtikrishnamurti Foundation India , Bhagavad Gita ( English)A. C. Bhaktivedanta Swami Prabhupadbhaktivedanta Book Trust , Shrimad Bhagwat Geeta Yatharoop (Hindi)A.C. Bhaktivendanta Swami Prabhupadabhaktivedanta Book Trust , Advaita Vedantaswami Vivekanandaadvaita Ashrama, India , The Awakening Of Intelligencej. Krishnamurtikfi Publications , Private Life Of An Indian Princemulk Raj Anandharpercollins Publisher India Pvt Ltd , Gone With The Windmargaret Mitchelfingerprint! Publishing , In Search Of Schrodingers Catgribbin, Johnrhuk Publisher , Black Holes (L) : The Reith Lecturesstephen Hawkingbantam Books , Relativity: The Special And The General Theoryalbert Einsteinrupa Publications India , The Lord Of The Ringsj. R. R. Tolkienharpercollins Publisher India Pvt Ltd , The Time Machineh G Wellsfingerprint! Publishing , The Complete Novel Of Sherlock Holmesarthur Conan Doylefingerprint Publishing , Kashi Ka Assi(Hindi Edition)Kashinath Singhrajkamal Prakashan , White As Milk And Ricenidhi Dugar Kundaliapenguin Ebury Press , Jeevan Jine Ki Kalaanand Satyarthidiamond Books , Dhayan Sutraoshodiamond Books , Rashmirathi (Hindi Edition)Ramdhari Singh Dinkarlokbharti Prakashan Pvt Ltd , Akbar & His Indiahabib Irfanoxford University Press , How To Avoid A Climate Disasterbill Gatespenguine Books Ltd , The Uninhabitable Earth: Life After Warmingdavid Wallace-Wellspenguin Books Ltd , Blind Watchmakerrichard Dawkinspenguin Books Ltd , Dragon Ball Super, Vol. 1Akira Toriyamaviz Media Llc , Dragon Ball Z, (Vol. 1-Vol-5)Akira Toriyamaviz Media Llc , One Piece Vol 1 Comicauthor Eiichiro Odaviz Media, Subs. Of Shogakukan Inc , Death Note Black Edition, Vol. 1Takeshi Obata And Tsugumi Ohbasimon & Schuster India , Death Note Black Edition, Vol. 2Takeshi Obata And Tsugumi Ohbasimon & Schuster India , Death Note Black Edition, Vol. 3Takeshi Obata And Tsugumi Ohbasimon & Schuster India , Homo Deusyuval Noah Hararivintage Books , Do Epic Shitankur Warikoojuggernaut Books , Iron Widowxiran Jay Zhaorock The Boat Books , The Guiderk Narayanindian Thought Publications , Malgudi Daysrk Narayanindian Thought Publications , Cosmoscarl Saganabacus Books , Magic Of Realityrichard Dawkinstransworld Publishers Ltd , Greatest Show On Earthrichard Dawkinstransworld Publishers Ltd , The Origin Of Speciescharles Darwinfingerprint! Publishing , The Great Arcjohn Keyharper Press , Isro:A Personal Historyr. Aravamudanharpercollins Publisher India Pvt Ltd , The Dark Holds No Terrorsshashi Deshpandepenguin Random House India , That Long Silenceshashi Deshpandepenguin Random House India , Sister Of My Heartchitra Banerjee Divakarunipenguin Random House India , Vine Of Desirechitra Banerjee Divakarunilittle, Brown Book Group , The Forest Of Enchantmentschitra Banerjee Divakaruniharpercollins Publisher India Pvt Ltd , The Secretrhonda Byrnemanjul Publishing House , Women Who Run With The Wolvesclarissa Pinkolaballantine Books , You Are Born To Blossomapj Abdulkalamprabhat Prakashan , The Universe Always Has A Planmatt Kahnhay House Publishers India , That Long Silenceshashi Deshpandepenguin India , Silence: The Power Of Quiet In The World Full Of Noisethick Nhat Hanhrider & Co , A Thousand Splendid Sunskhalid Husseinibloomsbury Paperbacks , The Seeker Of Nothingkabir Munjalkabir Munjal , Three Thousand Stitchessudha Murtipenguin India , Shreemad Bhagwad Geeta Yatharth Geeta (Hindi)Swami Adgadanandshree Paramhans Swami Adgadanandji Trust , Project Hail Maryandy Weirballantine Books , Rafa :My Storyrafael Nadal, John Carlinlittle, Brown Book Group , Dawn Of The Rajranjit Mishrasrishti Publishers & Distributors , There Are Rivers In The Skyelif Shafakpenguin India , Ikigaifrancesc García, Héctor,Mirallesdiamond Books , Verity Collen Hoover Sphere Books Ltd , It Ends With Us Collen Hooveratria Books , Demon Slayer Volume 1-23Koyoharu Gotougeviz Media, Subs. Of Shogakukan Inc , The Brothers Karamazovfyodordostoevskyom Books International , The Hidden Hindu (Set Of 3)Akshat Guptapenguin Ebury Press , The Boy Who Did Not Sign Ashish Ranjan Notion Press , The Tell-Tale Brainv. S. Ramachandranpenguinerandon House India Pvt Ltd , Why Bharat Matters Dr. S Jaishankar Rupa Publications India , Behaverobert M Sapolskyvintage Books , Revolution 2020Chetan Bhagatrupa Publications India , Brain That Changes Itselfnorman Doidgepenguine Uk , Manav Samazrahul Sakratiyayanlokbharti Prakashan , Crime And Punishment Fyodor Dostoevskyom Books International , Tumhari Kshayrahul Sakratiyayanrahul Foundation , Dimagi Gulamirahul Sakratiyayansanage Publishing House , What Every Body Is Sayingjoe Navarrowilliam Morrow Paperbacks , R.A.W Hitman The Real Story Of Agent Limas.Hussain Zaidisimon &Schuster India , The Art Of Beingerich Frommrobinson Books , The 48 Laws Of Powerrobert Greeneprofile Books , Kane And Abeljeffry Archerpanmacmillan , Not A Penny More, Not A Penny Lessjeffry Archerpanmacmillan , As The Crow Fliesjeffry Archerpanmacmillan , The Fourth Estatejeffry Archerpanmacmillan , The Prisoner Of Birthjeffry Archerpanmacmillan , And Thereby Hangs A Talejeffry Archerpanmacmillan , The Hobbitj.R.R Tolkeinpanmacmillan , The Tibetan Book Of The Deaddalai Lamapenguin Classics , Chess Fundamentals J.R. Capablancagrapevine India , The Book Of 5 Ringsmiyamoto Musashishambhala Publications Inc , Think Like A Monkjay Shettyharpercollins Publisher India Pvt Ltd , The Diary Of Ceosteven Bartlettebury Publishing , The Art Of Being Alone Renuka Gavranimanjul Publishing House Pvt Lt , Lord Of The Rings (3 Set Of Box)J.R.R Tolkeinharpercollins Publisher India Pvt Ltd , Angels And Demonsdan Browncorgi Books , Infernodan Browncorgi Books , The Lost Symboldan Browncorgi Books , Digital Fortressdan Browncorgi Books , Origindan Browncorgi Books , Mortal Enginesphilip Reevescholastic Corporation , Indias Most Fearless Vol 1Shiv Aroor And Rahul Singhpenguin Random House India , Predators Goldphilip Reevescholastic Corporation , Infernal Devices Vol-Iphilip Reevewalker Books , Steve Jobs Biographywalter Issacsonlittle, Brown Book Group , Assistant Commandant :Capf (Hindi) Drishti Drishti , Airbus Vs Boeing Rajat Narang Notion Press , Percy Jackson( 5 Book Set)Rick Riordanpuffin Books , Heros Of Olympus( 5 Book Set)Rick Riordanpuffin Books , Vishwadarshan, A Glimpse Of The Universemahatma Ramratna Thapaliyalfingerprint! Publishers , How To Win At Chess: The Ultimate Guide For Beginners And Beyondlevi Rosmanpenguine Random House India , The Descent Of Air Indiajitendra Bhargavjitendra Bhargav , The Science Of Mind Management Swami Mukundanandarupa Publications , The India Ways. Jaishankar Harpercollins Publisher India Pvt Ltd , India That Is Bharatj Sai Deepak Bloomsburry India , The 5Am Clubrobin Sharmagoyal Prakashan , The Laws Of Human Naturerobert Greeneprofile Books , Karma : A Yogis Guide To Crafting Your Destiny Sadhgurupenguin Publisher , Mindset : How Can You Fulfill Your Potentialcarol S. Dweckconstable And Robinson Ltd , The Mountain Is You Brianna Wiestamaryllis (An Imprint Of Manjul Publishing House) , Sky High The Untold Story Of Indigo Airlines Tarun Shuklaharper Businesses , The Compound Effectdarren Hardymanjul Publishing House , Dopamine Detoxthibaut Meurissewisdom Tree India , Think Straight Darius Forouxpenguin Random House India Ltd , Deep Work Cal Newport Piatkus Publication , Do It Todaydarius Forouxpenguin Random House India Ltd , When Things Fall Apartpema Chodronmaple Press Pvt Ltd , My Life And Work Henry Ford Maple Press Pvt Ltd , Twisted Series 4 Book Setana Huangboba Press , White Nightsfyodor Dostoyevsky Penguin Random House India Ltd , Murder In The Familycara Hunterharpercollins Publisher India , One Arranged Murderchetan Bhagatharpercollins Publisher India , The Lost Bookshopevie Woodsone More Chapter Books , The Pumpkin Spice Cafélaurie Gilmoreone More Chapter Books , The Midnight Librarymatt Haigcanongate Books , Butcher And Blackbirdbrynne Weaverlittle, Brown Book Group , A Court Of Thorns And Rosessarah J. Maasbloomsbury Publishing , The Bell Jarsylvia Path Rupa Publications , Good Girl Bad Bloodholly Jacksonharpercollins Publisher India , Icebreakerhannah Gracecoleen Hoover Books
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Himachal Pradesh View Result →
10.
Educational and Research Institute #9165503 Technical Bid
Supply And Installation Of Lab For Skill Department Of Tourism And Hospitality As Peraicte University Norms Supply And Installation Of Lab For Skill Department Of Tourism And Hospitality As Per Aicte University Norms , Insect-O-Cutors , Planetry Dough Mixer , Attachement Holding Rack , Knife Sharpner , Knife Sterlizing Cabinet , Table Top Weighing Scale , U/C Ice Cube Machine , Garbage Can , Table Top Planetry Mixer , Bread Slicer , Mobile Ingredient Bin , Marble Top Work Table With 2U/S , Work Table , Four Door Vertical Refer , Four Door Vertical Freezer , Marble Top Three Door Under Counter Refer , Wall Shelf , S.S. Storage Shelving , Plat Form Weighing Scale , 2 Deck-Baking Oven , Spreader Table With 2 U/S , Proover , Tray Cooling Rack , Garbage Can , Three Sink Unit , Ss. Pipe Shelf , Water Cooler(Cap. 120 Ltr) , Mobile Cleandish Rack , Garbage Can , Lockers , Insect-O-Cutors , Garbage Can , Three Doorunder Counter Refer , Work Table With 2 U/S , Sandwich Griller , Microwave Oven , Salamander , Four Door Vertical Freezer , Four Door Vertical Refer , (2+ 1) Chinese Burner Range , Deep Fat Fryer (Twin Basket Table Top) , Spreader Table With 2 U/S , Spreader Table With 2 U/S , Four Burner Range With Pipe U/S , Work Table With 2 U/S , S.S. Storage Shelving , S.S. Storage Shelving , Spreader Table With 2 U/S , Chapati Plate With Puffer , Spreader Table With 2 U/S , S.S. Mobile Tandoor (Gas Operated) , Spreader Table With 2 U/S , Dosa/Griddle Plate (Full Smooth)) With Pipe U/S , Spreader Table With 2 U/S , Spreader Table With 2 U/S , Insect-O-Cutors , Stone Top Mock Bar S.S. Counter With 750 Mm Flap Door , Frontflap With Waste Bin , Mocktail Station With Pipe U/S , Work Table With 2 U/S , Blender , Ice Crusher , Work Table With 2 U/S , Semi Automatic Coffee Machine With Coffee Grinder , Three Door Back Bar Bottle Cooler , Sandwich Griller , Centrifugal Juicer , Deep Freezer (300 Ltrs) , Refrigerated Displaybase +3 , Refrigerated Displaywith 1/1 10 Bain Marie , S.S. Storage Shelving For Display , Cutlery Table With Storage Cabinet , Food Pick-Up Counter W/ Cold Bain Marie,Tray Rest Rail & Sneeze Guard (2No 1/1 G.N Pan) , Food Pick-Up Counter W/Hot Bain Marie,Tray Rest Rail & Sneeze Guard (4No 1/1 G.N Pan) , Cheese Trolley , Dessert Trolley , Salad Trolley , Wine Trolley , Gueridon Trolley , Room Service Trolley , Installation Of Lpg Cylinder Manifold System (Of 4X2=8 Cylinders Of 19 Kg Capacity Each) With All Cylinders Kept In Staggered Manner At Gound Level. Having 3 Cylinders Operational At Once With 3 In Standby Position. Made Out Of Hot Finished Seamless Pipes As Per Astm A-106 Gr B, Necessary Mecv Manifold Nipples, #3000Psi Rated Sockets, Special Clamps, Click On Type Compact Value Cylinder Adaptors, Cylinder Pigtails, Nrvs , Efcvs And Other Accessories As Listed Below. , Compact Value Cylinder Adapter. , Non Return Value Made Out Of Forged Brass. , Flexible Cylinder Pigtail Made Out Of Ptfe Enriched Polymer Chemically Resistant To Lpg , Duly Braided By Ss-304. , Adjustable Pressure Regulator(2301,Gas Flow Rate Is 100Nm3/Hr & Out Let Pressure Is Adjustable From 0.5 To 10 Kg/Cm2, 1:Bsp-Int) Like With Necessary Fittings. , Bourdon Type Pressure Gauge In 100Mm Dial Size Of Pressure Range 0-4,14Kgf/Cm2 With Valve. , Burner Pipe: 4 Feet , Needle Compact Valve: 3/8X1/2 , Lpg Filter: 40Mm , Flame Arrester: 25Mm , Nut Bullnose 1 , Cs Ball Valve Size: 40Mm , Astm-A-106 Schedule 40 C Class Pipe With Forged Fitting Duly Welded And Including All Fitting Material(Socket,Clamp,Tee,Short Bend, Etc.) Size: 40Mm , Testing & Painting , Soft Broom , Hard Broom , Yard Broom , Carpet Brush , Hand Scrubber , T-Scrubber , Wc Brush , Upholstery Brush , Ceiling Broom , Mops:With Detachable/Fixed Heads , Squeezees , Box Sweeper , Buckets – 25 Ltr. Capacity , Mugs , Bowls , Dust Bins , Maid’S Trolley , Mop Wringer Trolley , Cleaning Agents (Ltrs.), R1, R2,R3,R4,R5 , Step Ladder Long Size 7 Ft , First Aid Kitbox , Screw Driver Multipurpose , Plier , Khurpa , Hammer , Flower Vases Assorted , Plastic Containers For Holding Flowers And Foliage , Scissors , Spray Bottle , White Board , Reception & Pos Counter , Laminate-Green Lam, Absolute White (Pf) 108 , Podium , Concierge , Bell Desk , Travel Desk , First Aid Box , Key Box , Dining Table Chairs - I (With Cushion) , Dining Table - 1300Mm X 700Mm, Laminate - Greenlam 270 Silver Grey , Dining Table - 750Mm X 700Mm, Laminate - Greenlam 270 Silver Grey , Table - 600Mm X 600Mm, Laminate - Greenlam 270 Silver Grey , Sofa Seating - Fom Area , Bar Chairs - I , Side Knives , Large Knives , Service Forks , Service Spoons , Dessert Spoons , Dessert Forks , Dessert Knives , Fish Knives , Fish Forks , Soup Spoons , Butter Knife , Tea Spoons , Coffee Spoons , Ice Cream Spoons , Fruit Knives , Fruit Forks , Pastry Forks , Steak Knives , Jam Spoons , Large Plates (Full Plates) 10” , Half Plates 9” , B&B Plates , Soup Cups With Saucers , Cereal Bowl 5” Dia , Breakfast Cups/Saucers 8 Floz , Tea Cups/Saucers6 Floz , Demitasse/Saucers3 Floz , Consomme Cups/Saucers 8 Fl.Oz , Egg Cups , Ash Trays , Budvases , Cruet Sets , Water Jugs , Tea Pot/Flask (2 Portions) , Tea Pot/Flask (4 Portions) , Milk Pot , Hot Water Jugs , Coffee Pots/Flask (2 Portions) , Coffee Pots/Flask (4 Portions) , Creamer , Sugar Bowls , Butter Dishes , Ice Creams Cups , Finger Bowls , Menu Stands , Sauce Boats With Ladles , Tea Strainer/Slop Basin , Straw Holder , Toothpick Holder , Candle Holder , Entrée Dishes Single Compt. (2 Portions) , Entrée Dishes Single Compt. (2 Portions) , Entrée Dishes Single Compt. (2 Portions) , Entrée Dishes Double Compt. (4 Portions) , Platter 2 Portions (Oval) , Platter 4 Portions (Oval) , Platter Small (Round) , Platter Medium (Round) , Restaurant Trays (Small) , Restaurant Trays (Medium) , Sugar Tongs , Ice Bucket , Ice Tongs , Toast Racks , Chill Cups With Stands , Restaurant Salvers , Mustard Spoons , Food Covers , Water Tumbler (High Ball) , Water Goblets , Juice Glasses / Pony Tumblers , Tom Collins , Jam & Mustard Pots / Chutney Bowls , Glass Bowls , Beer Goblets , Draught Beer Glass , White Wine Glass , Red Wine Glass , Parisian Goblets , Claret Glass , Sherry Elgin , Sherry Copita , Port Wine Glass , Hock Glasses , Moselle Glass , Champagne Tulip , Champagne Flute , Champagne Saucer , Cocktail Glass , Brandy Balloon , Liqueur Glass (Straight) , Liqueur Glass (Standard) , Old Fashioned , On The Rocks Glass , Rollypolly , Parfait Glass , Decanter , Coffee Carafe , Martini Glass , Sour Glass , Horsd’Oeuvre Tray , Wine Bucket Stand , Pastry Tongs , Nut Cracker , Gateaux Slicer , Pepper Mill , Nutmeg Grater , Cigar Cutter , Bar Spoon , Ice Picks , Peg Measure , Optic Measure , Check-Flow Pourer , Push Up Measure Pourer , Ice Cream Scoop , Hydrometer , Avocado Dish , Asparagus Plate , Asparagus Tongs , Egg Dish (Round Ear) , Fish Dish (Oval Eared) , Oyster Dish/Plate , Oyster Fork , Snail Dish , Snail Fork , Snail Tong , Parfait Spoon , Salad Dish , Cheese Knife , Grape Fruit Knife , Grape Fruit Spoon , Lobster Cracker , Lobster Pick , Corn On The Cob Holder , Grape Scissors , Caviar Knife , Fondue Fork/Dish , Carving Set , Cheese Board , Skewers , Oil & Vinegar Cruet , Sugar Dredger Epns , Rechauffe Battery , Fruit Basket , Gateaux Stand , Table Numbers , Angels’S Wings , Crown Cap Opener , Hydrometer , Chopping Board , Waiters Friend Ss , Can Opener , Wine Cradle , Broken Cork Extractor , Corking Machine , Citrus Squeezer Ss , Funnel Ss , Bar Mixing Glass Ss , Swizzle Stick , Muddler , Cocktail Sticks , S.S.Grater , S.S.Round Spoon , S.Sflat Spoon , S.S.Fish Slicer , S.S.Perforated Round Spoon (Frying Spoon) , Soupstrainer S.S. , Rolling Pin (Wooden) , S.S.Tongs , Chopping Board (Fiber With Color Codes) , Chopping Board (Fiber With Color Codes) , Steak Hammer , S.S.Measuring Jug , Egg Slicer , Piping Bag/ Nozzle , S.S. Lime Squeezer , Potato Masher Ss , S.S. Mixing Bowl , S.S. Mixing Bowl , Stock Pot (20 Ltrs.) Ss With Handle And Lid , Oven Aluminum Baking Trays , Oven Steel Trays , Oven Iron Trays , Silicon Pad , Oven Gloves , Brine O’ Meter , Thermometer For Chef , Aluminumdegchi With Lid (Sandwich Bottom)– , Aluminum .Degchi With Lid (Sandwich Bottom)– , S.S.Degchi With Lid (Sandwich Bottom)– 08” Dia , Ss Kadhai (Sandwich Bottom) , Pressure Cooker (15 Lts) , S.S Tray/ Thal – 16” Dia , Non Stick Frying Pans 10” Dia , S.S Small Braising Pan , Tava With Handle , Collander Ss 08” Base , Pie Dish Aluminium , Mahi Tawa , Steamer Aluminum , S.S Tray/ Thal – 16” Dia , Heavy Bottom Aluminum Patila With Lid , Heavy Bottom Aluminum Patila With Lid , Heavy Bottom Aluminum Patila With Lid , Steel Kadhai , Steel Kadhai , Spider Wire Mesh For Frying , Frying Ladle ( Jharna) , Frying Ladle ( Jharna) , Doori , Exhaust Fan , Perforated Spoon (Wire Mesh Type) , Barbeque Sigri , Mortar And Pestle , Potato Masher , Idly Steamer , Small Moulds (Assorted) , Kitchen Aid , Cake Ring (6 Inch Dia) , Cake Ring (8 Inch Dia) , Cake Ring (10 Inch Dia) , Pie Ring , Quiche Ring , Bread Mold (1Kg) , Bread Mold (750 Gm , Bread Mold 500 Gm , Cake Stand , Bakery Plastic Large Rolling Pin , Different Shapes Cutter For Cookies , Muffin Mold Trays , Removeable Bottom Mold , Boning Knife , French Knife , Fillet Knife , Paring Knife , Garnishing Knife , Carving Knife , Fruit Knife , Citrous Fruit Knife , Sharpening Grinds Hollow, Roll, Flat, Concave , Butter Curler , Can And Wine Opener , Aspic Cutters , Mandolin , Cone Shape Mold , Dough Scrapper , Pizza Cutter , Wire Whisker , Tart Mold , Mold – Various Shapes & Sizes , Dough Nut Cutter , Roller Docker , Glass Bowl For Pudding , Bread Knife , Parisienne Scoops 4 Sizes , Zig Zag Knife , Zig Zag Scrapper , Piping Bag With Nozzle , Patty Pans , Pastry Brush , Spatula Ss , Tweezer , Peeler , Grater Ss , Vegetable Scorer , Ice Pick , Ice Crusher , Concentric Circle Cutter , Chinese Cleaver , Chinese Sculpting Tools , Bamboo Skewers , Grape Scissors , Scissors , Needle Nose Pliers , Pate Mold Aluminum , Flour Strainer , Pressure Cooker , Silicon Spatulas , Barbeque Sikkh , Terrine Mold Aluminum , Food Mirror (Various Sizes) , Stainless Steel Palta , Stainless Steel Palta , Iron Palta With Wooden Handle , Iron Palta With Wooden Handle , Copper Lagan With Lid , Copper Lagan With Lid , Coper Lagan With Lid , Masala Rack , Masala Rack , Tawa With Wooden Handle , Wooden Spoon , Chinese Wok With Wooden Handle , Chinese Wok Broom , Kitchen Paper Dispenser , Commercial Gas Lighter , Conical Strainer , Kitchen Aid , Sous Vide Machine , Vacuum Pack Machine , Molecular Gastronomy Kit , Smoking Machine , Table Mounted Pasta Machine
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 4
11.
Communications and Information Technology  #8963447 Technical Bid
Appointment Of New Travel Agent Appointment Of New Travel Agent
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 1
12.
Housing Urban and Rular Development #8667568 AOC
Tender for Atal Bus Stand (C Type) At Rampur Under M.Rampur Block, Kalahandi.-- 1 CVL 2 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 3 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 4 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 5 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 6 First Floor 7 Second Floor 8 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 9 First Floor 10 Second Floor 11 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 12 First Floor 13 Second Floor 14 50000044 Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ). Ground Floor 15 50000057 Drip course mould plaster 1:4 (1:cement :4sand) including necessary scaffolding curing etc. complete at all depth and height. Ground Floor 16 First Floor 17 50000076 Plinth protection with side brick masonry wall (1:4) inside sand filling over which 100 mm thick cement concrete using 40 mm coarse aggregate in prop (1:3:6) and over that, 50 mm thick cement concrete using 12mm to 19mm coarse aggregate in prop (1:2:4) with cement plastering (1:4) in proper slope. Ground Floor 18 50001152 Providing & fixing aluminium work (min.thickness of powder coating 50 micron) for structural glazing including required scaffolding for fixing the aluminium sections for extruded builtup standard tubural & other sections of approved make confirming to IS:733 and IS:1285 fixing with rawl plugs & screws or with expansion hold fasteners including necessary fillings up gaps at junctions at top,bottom & sides with cement mortar,aluminium sections shall be smooth,rust free ,straight,mitred & jointed mechanically,the glazing will be 5mm thick,coloured,reflective glass of approved colours & make (SAINT GOBAINI) fixed in aluminium sections upto required height & joints filled clear weather silicon sealant etc complete in all respect as per the direction of EIC/Architect in charge. Ground Floor 19 First Floor 20 Second Floor 21 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 22 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 23 First Floor 24 Second Floor 25 50001311 Fly Ash brick masonary in cement mortar 1:4:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 26 First Floor 27 50005074 Supplying, installing RO +UV+UF+TDS control+UV in-tank and zero water wastage technology with active cupper technology, wall mounted water purifier aquaguard capacity up to 20L/hr(Make KENT-grand star/Eureka Forbes)[N.S.W.I] Ground Floor 28 50010026 Supplying, Fitting and fixing of glass reinforced concrete(GRC) screens 30mm to 32mm thick (Dry density>1800 kg/cum) on wall (Wall cladding) and module of 1.5 sqm of approved quality/ pattern shall be synthetic rubber/ FRP moulded in size, pattern, design, colour and thickness. The screens made of 53 grade white cement make Birla/JK cement, quartz, fine silica sand, alkali resistance glass fiber, super plastisizer, polymers and UV resistant synthetic inorganic pigments etc. The screen shall be fixed by dry fixing method with appropriate SS pipe 304 grade ‘L’ shaped clamps & cleat, using fasteners and necessary hardware, etc. Including MS scaffolding in building façade. The rate shall be included the structural steel frames (Horizontal & vertical members) support to hold the GRC jalli at required building height to withstand wind pressure as per IS 875(prt-3):2015. The cost includes labour, materials, transportations, T&P, etc. all complete as per direction of Engineer-in-Charge. The screen must have compressive strength>400kg/cm2 ,wet transverse strength > 7 N/mm, thermal conductivity1.63 W/m-K at 3% moisture content, water absorption<(><<)> 5% of dry weight. [NEW-NSWI] Ground Floor 29 First Floor 30 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 31 First Floor 32 Second Floor 33 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 34 First Floor 35 Second Floor 36 50010384 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC SILL BAND) Ground Floor 37 First Floor 38 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 39 50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor 40 First Floor 41 Second Floor 42 50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor 43 First Floor 44 Second Floor 45 50010432 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC STAIRCASE) Ground Floor 46 First Floor 47 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 48 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 49 First Floor 50 Second Floor 51 50010458 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement. (FOR RCC FINS) Ground Floor 52 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 53 First Floor 54 Second Floor 55 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 56 First Floor 57 Second Floor 58 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 59 First Floor 60 Second Floor 61 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 62 First Floor 63 Second Floor 64 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 65 First Floor 66 Second Floor 67 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 68 First Floor 69 Second Floor 70 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 71 First Floor 72 Second Floor 73 50010668 Providing and Fixing of Factory made WPC Door Frame of size 125x65 provided with plug-in socket arrangement and joined together by screws. The finished door frame units to be of approved colour using high quality pigments complete in all respect as per specification. [NSWI] WPC Frame make:-Century/Green Ground Floor 74 First Floor 75 50010680 Providing and fixing of ISI marked 30 mm thick Flush door Shutters (Single leaf) finished with 1mm thick lamination both side total thickness of 32mm flush door Shutter with 4 Nos SS butt Hinges (125 mm x 85 mm x 5.5 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 1 No SS Aldrop (400mm X 300mm x 16mm dia rod), 1 No Floor type double door stopper, 2 Nos SS Handle of size 150mm, Teak wood Leaping around the edges, 1 No. Back Buffer with all materials,adhesives etc complete. (Excluding door closure, ornamental handle and Mortise Lock). [NSWI] Make:- BWP Flush door (Century Sainik 710 / Green marine gold 710), Laminate (Greenlam/ Centurylam,Marino),Hard ware fittings (Godrej). Ground Floor 76 First Floor 77 50010704 Providing and Fixing of Single leaf solid WPC door shutter of 30 mm thick compacted with wood grain finished with 2 Nos SS Handles (150 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 4 Nos. SS Butt Hinges (125mm x 8.5mm x 5.5mm ) with all necessary fittings Complete with approved colour . [NSWI]Make:- WPC Door(Century/Green), Hard ware fittings (Godrej). Ground Floor 78 First Floor 79 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 80 First Floor 81 Second Floor 82 50010815 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm of size hard granite chips with chicken welded mesh 25mmx25mm 11 gauge on new work including cost of labour, material, T and P etc. all complete. Second Floor 83 50010827 Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with Balustrade of size 38mm x 38mm x 2mm @ 900mm C/C, stainless steel square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification and the entrance newel post will be 100mm dia. of 750mm height with top bulb, buffing, polishing etc. with cost, conveyance, labour, T and P etc. required to complete in all respect. [NSWI] Stainless steel Brand:- JINDAL/NIPPON STEEL. Ground Floor 84 First Floor 85 50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. Ground Floor 86 First Floor 87 50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor 88 First Floor 89 50011029 Providing and painting the mural art painting work on wall/floor/ceiling by the selected artist/ agencies to make the art most visible of the stretch. The work includes scraping and cleaning of wall, painting one primer coat and one weather seal coat (Asian/ Berger/Dulux), applying paint for mural art painting. The paint must have a durability of at least 5 years. The cost of the work includes all the labour, man power, scaffolding, transportation, materials required, fooding, etc. for execution of the mural art to give the finish product. It must be noted that, the height shall be calculated from the point where the painting starts till the point it continues and ends. UPTO 3M HEIGHT Ground Floor 90 First Floor 91 50011406 Providing and fixing of factory-made 3Track 3Panel UPVC Sliding window (White Colour) frame size 128X50mm and Sash size 45X70mm complete up to and including 1.5m high, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.5 mm – 2.5 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber. The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.5mm to 2.5mm. UPVC Windows & Doors must be fabricated with fusion welded /Zip welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be minimum of 5mm clear Toughened Glass (SAINT GOBAIN/AIS) with weather seal (EPDM/TPE). After placing 5 mm clear Toughened glass in the sash, UPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system (holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes) shall be provided. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm) (UV treated silicon for outer frame sealing & Acrylic paintable silicon for inner frame sealing), complete in all respect. Standards & Tests: Follow the British Standard (BS EN 12608, UK, CEPT Ahmedabad, tested by Central Building Research Institute, Roorkee Shriram Institute of Industrial Research, New Delhi. All technical specification having wall thickness of min 2.0 mm(+-.02mm) with TPE gasket, wool pile with rollers, fasteners for fixing frame to finalised wall and necessary screws etc. and glass should be single glass with glazing bead of appropriate dimension. Reinforcement of galvanised mild steel with thick ness of 1.5 mm to 2.5 mm has to put throughout the Frame, glass shutter and mesh shutter. Glass support beading make of upvc sections will be fixed with TPE gasket to keep glass tight and unmoved. Multi point locking system (called Pop Up) made out of casted zamac with white powder coated and locking hook will make of SS304 grade material. Aluminum guide rail will be fixed on the Bottom part of frame on which the glass shutters will run. The roller will make of nylon and having capacity of 40-120 kg depend on glass weight. Fin seal will be provided to protect the dust in between closing point &interlocking point of glass & mesh shutters. Mesh panel (Fibre mesh & SS mesh) can also be provided depending upon the requirements of window and location wise. This cost includes fixing, wastage, transportation, labour, material, etc. complete. (NSWI SPECIAL) Make:(FENESTA/SAINT-GOBAIN) Ground Floor 92 First Floor 93 50011416 Providing and fixing of factory-made 2Track 2Panel UPVC Sliding window/Door (White Colour) frame size 70X50mm and Sash size 45X74mm complete above 1.5m high, comprising UPVC multi-chambered frame having in-built UPVC roller track on top and uPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.5 mm – 2.5 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber.The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.5mm to 2.5mm.UPVC Windows & Doors must be fabricated with fusion welded /Zip welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be minimum of 6mm clear Toughened Glass (SAINT GOBAIN/AIS) with weather seal (EPDM/TPE). After placing 6 mm clear Toughened glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock &Multi Lock and rollers & proper drainage system (holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes) shall be provided. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm) (UV treated silicon for outer frame sealing & Acrylic paintable silicon for inner frame sealing), complete in all respect. Standards & Tests: Follow the British Standard (BS EN 12608, UK, CEPT Ahmedabad, tested by Central Building Research Institute, Roorkee Shriram Institute of Industrial Research, New Delhi. All technical specification having wall thickness of min 2.0 mm(+-.02mm) with TPE gasket, wool pile with rollers, fasteners for fixing frame to finalised wall and necessary screws etc. and glass should be single glass with glazing bead of appropriate dimension. Reinforcement of galvanised mild steel with thick ness of 1.5 mm to 2.5 mm has to put throughout the Frame, glass shutter and mesh shutter. Glass support beading make of upvc sections will be fixed with TPE gasket to keep gl ass tight and unmoved. Multi point locking system (called Pop Up) made out of casted zamac with white powder coated and locking hook will make of SS304 grade material. Aluminum guide rail will be fixed on the Bottom part of frame on which the glass shutters will run. The roller will make of nylon and having capacity of 40-120 kg depend on glass weight. Fin seal will be provided to protect the dust in between closing point &interlocking point of glass & mesh shutters. Mesh panel (Fibre mesh & SS mesh) can also be provided depending upon the requirements of window and location wise. This cost includes fixing, wastage, transportation, labour, material, etc. complete. (NSWI SPECIAL) Make:(FENESTA/SAINT-GOBAIN) Ground Floor 94 First Floor 95 50011456 Supplying, Fitting & Fixing of full body Vitrified Tile (PREMIUM QUALITY) on floors of size 600mm x 1200mm x 10 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free, coefficient of friction greater than 0.34. Make: (JOHNSON MARBONITE/ SOMANY DURASTONE/ KAJARIA E-SHIELD)Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER(HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor 96 First Floor 97 50011486 Supplying, Fitting & Fixing of Anti-Skid Vitrified Tile (PREMIUM QUALITY) on floors of size 600mm x 600mm x 9 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY TECHSTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor 98 First Floor 99 50011496 Supplying, Fitting & Fixing of Industrial parking heavy duty Vitrified Tile (PREMIUM QUALITY) on floors of size 300mm x 300mm x 10 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY DURASTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor 100 50011926 Providing & applying water proofing treatment on SITC of Sunken floor treatment Stage1:Cleaning of concrete surface to remove dust,oil ,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any ,with Sika Latest modified repair mortar including a coat of bonding agent. Stage2:supply and application of 1:3 cement-sand mortar ,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area. Stage3:Supply and application of Sika Top Seal 107-the cementitious ,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied. Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C ,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10% (Make:- MYK or Sika or BASF) Second Floor 101 50011948 Supply and installation of ZMS (Nylon)/Vibrance Serene series cubicles of width and depth as per specifications/ site drawings and height of 2000mm. The cubicle is made from solid grade 12mm thick compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure > 5 MPa and temperature >120°C with bunch of kraft papers impregnated with thermosetting phenolic resin and decorative papers made of Alpha cellulose fiber impregnated with thermosetting melamine resin which provide superior scratch, abrasion, heat, chemical, impact, graffiti & moisture resistance along with anti-bacterial properties. Panels have a black core that when machined, presents a distinctive black edge. All doors of size 600x1800mm will be of single colour and made of 12 mm thick HPL compact panel. The doors will have chamfered edges. Each door will be supported by 3 nos Nylon PA-6 made hinges affixed to the pilasters. Nylon PA-6 made coat hook and lock set are provided with each door. All pilasters will be made of 12 mm thick HPL compact panel with chamfered edge and completed with stainless steel made thumb turn lock set. Aluminum made door stopper profiles with rubber linings for dampening the noise while door closing will be provided at the vertical ends of the pilasters. Pilasters will be anchored to the floor using Nylon PA-6 made adjustable legs. The bottom gap is 150 mm. All intermediate partitions or dividers of 1800mm hight will be made of 12 mm thick HPL compact laminate panels. They are affixed with aluminium made U-channel at their ends for ultimate stability of the system. The Semi-spherical (Top) head frame structure for surface protection of size to be 50x32x1.6T, Corner joinery section size to be 40x16.5x1.8T,U-Channel Wall joinery section size to be 22x16x1.6T,Door stopper section size to be 21x12.5x1.6T. Nylon Polyamide grade-6 Adjustable Pedestal Footing of base minimum diameter 70 mm, giving a clearance height of 150mm. Self closing Hinges (Gravity mechanism) made from Nylon Polyamide grade-6. Round Coat hook with base diameter 53 mm made from Nylon polyamide grade-6. Round Door knob diameter 48 mm with thumb-recess made from Nylon polyamide grade-6. Rotating Thumb-turn locking system with privacy indicator locking system made from Nylon polyamide grade-6, Anti-noise rubber padding, Stainless steel grade 304 screws, Anti-rotation Nylon polyamide grade-6 expandable wall plugs. The cost includes supply, installation, transportation, handling charges completely. Make complete set:MERINO/GREENLAM Ground Floor 102 First Floor 103 50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Ground Floor 104 First Floor 105 50012200 System Aluminum Casement System Doors – Double Leaf Swing single glazed door Providing and fixing System Aluminum works for casement systems door having door frame 55mmx40mm, shutter 70mmx40mm, door bottom transom 150mmx40mm, central profile 47.3x42.9mm, grazing bead 31.8mmx17.85mm with glazing of single glass panel without middle transom made of non-euro groove architectural aluminium profile. The extruded aluminums sections should be T6 tempered made from Grade 6063 alloy, approved shade of pure-polyster/ hybrid surface coating Anodized (50-60-micron powder coat), silicon coated to suit marine atmosphere. All profiles should be None insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacture. The drainage slots provided at the bottom part of the frame/sash on the outerside & weather strip siliconased brush gasket will be provided. 6mm Clear Toughend Glass (Saint-Gobain / AIS) infill fitted unto Sash/Frame using micro-wave treated siliconised EPDM gasket. The casement systems having hardwares SS handle (22mmx300mm), mortise lock with both side key cylinder, floor spring. Wall Thickness - Aluminium: 1.5mm. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. This cost includes labour, materials, wastage, transportation at site, fixing, fittings, etc. all complete. (Make :- FENESTA/ REKLAD) Ground Floor 106 50012828 Supply and fixing of MCM Modified Clay Material ‐ MCM A 300X600 mm of PHOMI make,as per company standard dimension, pattern, colour as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 and European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15.The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in‐charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in‐charge. Make-Phomi Ground Floor 107 First Floor 108 50013261 Providing, Fixing & Fitting Ceramic glazed tiles (SUPER PREMIUM QUALITY) on wall of size 300mmx600mm of approved shade on 12mm thick cement mortar of mix (1:3) and grouted with epoxy grout including cost, conveyance, loading, unloading, stacking, royalties of all Materials, cost of all Labour, Sundries, T & P required for the work, etc. complete in all respect. (JOHNSON/SOMANY/KAJARIA) [NSWI] Ground Floor 109 First Floor 110 EPH 111 10000556 Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200cfm/300psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories,tools and plant and consumables etc for lowering of 200mm dia PVC pipes for housing fitted with socket and with or without well screen as per tenecessity for soft,medium,hard and boulder formation (PVC casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and with drawing after completion of the tube well).(Icluding both LABOUR FOR DRILLING 200MM DIA UPTO 30 MTR. & LABOUR FOR DRILLING 150MM DIA FROM 30 MTR TO 150 MTR including all.) CONSIDER FOR 150 MTR DEPTH. Ground Floor 112 10000564 Lowering 200mm dia. PVC pipes with or without slotted pipes as per the necessity from ground level with fitting and fixing the same in a perfectly vertical position. This includes cutting, threading pipes/slotted pipes with providing and fixing of required jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells so as to prevent entry of foreign materials from above. (FOR HAMMER DRILLING RIG/ COMBINITION DRILLING RIG). Ground Floor 113 10000570 Cleaning and developing 200mm dia. tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour .(FOR HAMMER DRILLING RIG/ COMBINITION DRILLING RIG). Ground Floor 114 10000583 Supplying and fixing of control panel board with all accessories. (UPTO 3HP SINGLE PHASE) Make: KSB Ground Floor 115 10000588 Supplying and fixing of HDPE Pipes 32/40 mm (High Density Polyethylene pipes having inner dia. 32mm and outer dia. 40mm) 6Kg/Sq. cm With IS specification.(32MM NOMINAL BORE SIZE). Make Finolex/Oriplast/Supreme. Ground Floor 116 10000594 Supplying and fixing of PVC coated steel rope including cost of material, labour etc. complete. Make-Mahdev/Aerolex Ground Floor 117 10000596 Supplying and fixing of Finolex/L&T/Cable 4 Sq. mm (3core copper wire flat cable with PVC insulation). Ground Floor 118 10000600 Supplying and fixing of accessories like Nipple, Bore cover, MS clamp, Nut Bolt, Stainless steel nipple, Short piece, GI bend, Socket etc. complete. Ground Floor 119 10000602 Installation charges pump set with all accessories including transportation etc. Ground Floor 120 10001184 Supplying of 200mm inner dia. PVC casing pipe for deep bore well CD (deep well casing) type basing on IS-12818-2010, wall thick ness 13mm to 14.8mm with One end of the pipe is male-threaded whereas the other end is a female-threaded socket. Threads are either V-type or trapezoid-type, and protection caps are provided on the threads to protect the threads in transit. With pressure ratings ranging from 7.5 to 20 bar (PN). Make: ORIPLAST/SUPREME/FINOLEX Ground Floor 121 10001190 Supplying Submersible Pump Set with the cost of Motor of following model including cost of transportation charges.1.5HP, Single phase,32D,19 Stage (head 50-129m). Make: KSB(2C/21). Ground Floor 122 10001204 Supplying Submersible Pump Set with the cost of Motor of following model including cost of transportation charges.7.5HP, Three phase, 100x75, Open well (head 14-29m) make: KSB ( MR7.5A/50X40X45) Ground Floor 123 FUR 124 50010482 Supply and fixing of GODREJ MAKE EXECUTIVE CHAIR WITH HEADMODEL NO- Aero (Large Seat) Black Ink Color FK01(56101522SD04692) +(561015 22SD04353).[NSWI] Ground Floor 125 50010484 Supply and fixing of GODREJ MAKE EXECUTIVE CHAIR WITH HEADMODEL NO- OXBO MID BACK CHAIR 7502RGC01 Black Ink Black56101522SD03157.[NSWI] Ground Floor 126 50011783 Supplying and installation of work station table of size 1050x600x750mm(H) having 25mm thick pre-laminated particle board top with 2mm thick PVC edge leaping on all exposed edges. The legs of the tables have 60x40mm and beams are 40x20mm MS powder coated. The vertical raceway with built in separator for power and data of size 250mmx70mm thick with provision to mount switches and sockets on laminate facia with vertical wire entry cover for wire uptakes from floor to raceway of 65mm dia wire manager grommet in complete set are provided. Make: Featherlite (HSN code-94031090) Ground Floor 127 50013340 Supplying and instllation of dining chair having Seat and Back made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. Make: GODREJ ,Model-UNWIND, HSN CODE-94016900 Ground Floor 128 50013568 Supplying and installation of Table without CPU Hanger size shall be 1500 Width mm x 750 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 and MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . Make: Godrej ENTERPRISE, HSN CODE-94031010 Ground Floor 129 50014300 Storage Unit:Slimline 2 Door with full locker 1900H X 900W X 507D Supplying and placing in position Home storage Unit.900mm(W)x507mm(D)x1950mm(H) (Height without leveler). Construction & Material-Aesthetically appealing Slimline, completely knock down construction. Removable Skirting to cover integral legs. Legs fitted wit h screw type leveler Made from combination of CRCA 0.8 mm & 0.6 mm Thickness. Main Door Steel Hinged Door. Main Door Locking / handle: Handle & Base Aesthetically appealing, Ergonomic, flush with door made from Zinc alloy. 3 way 90 Degree Removable key type Cam lock & locking mechanism. Locker Door & it’s locking / handle for Model ‘H’ .Fixed Half locker on RH side Hinged Door 2 way Cam lock with Knob type handle Shelving: • Finish: Epoxy Powder coated to the thickness of 50 microns (+-10).HSN CODE-94032090 Ground Floor 130 50014302 Chair:Traverse 3 Seater 2 arms Providing, supplying and placing of waiting chair.SEAT/BACK SHELL: It is powder-coated shell made from cold rolled M.S. sheet 0.12 ± 0.013 cm thickness with circular perforations.The Side Bar is made of cold rolled M.S.sheet 0.12 ± 0.013 cm thickness. The Shell is assembled on the Cross Beam with help of M8 Bolts. SEAT SIZE : 50.0 cm (W) x 45.5 cm (D) BACK SIZE : 50.0 cm (W) x 56.0 cm (H)CROSS BEAM: It is made up of cold rolled steel with 0.2 ± 0.02 cm thickness. The crossbeam is powder coated. It is covered with plastic end caps LEG: It is made up of cold rolled steel with 0.12 ± 0.013 cm thickness. It is powder coated. The legs are fitted with leveller cups covered with SS304 sheet. ARMREST: It is made of SS304 round tube of Ø 3.175 ± 0.03cm x 0.12 ± 0.013 cm thick formed to make an oblong shape.WIDTH (W): 173.5 CM.DEPTH (D): 74.0 CM.HEIGHT (H): 91.0 CM SEAT HEIGHT (SH): 44.0 CM.HSN CODE-94031010 Ground Floor 131 50014304 Storage Unit:Pigeon Hole Base Supplying and placing in position Storage unitOverall Dimensions of Pigeon Hole Base 1800 H Main Modish Oak shall be 582mm(W)x400mm(D)x1200mm(H) . TheConstruction shall be Rigid Knock Down Construction . Material used shall be all side panels , top/bottom panels and shelf panels shall be made from 18 mm thick Pre- Laminated Board (interior grade) with 2 mm thick PVC edge beading . Back panel shall be made from 9 mm thick Pre- Laminated board . Stackability shall have Add on units stacked width wise to form a bank of racks having common side panel (max . 6 Add ons) . The shelfs shall be 6 Main Module has 12 shelves placing in 270 mm distance , 4 Main module has 8 shelves placing in 270 mm distance . The Configuration shall have 6 Main Module , 4 Main Module also 6 Add on module , 4 Add on module .HSN CODE-94031010 Ground Floor 132 50014306 Chair:Unwind with Desklet Providing, supplying and placing of chair with desklet.The Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. The Armrest should be made of indoor grade PolyPropylene compound and assembled over the tubular frame. The L shaped desklet should be made of 1.8+-0.05cm thick prelaminated particle board with 0.2+-0.05cm thick injection moulded poly proplylene all around. Desklet should have back and front adjustment of 4.4+-0.5cm. The paper tray should be made of 0.4mm thick MS rod which is spot welded to form a mesh like structure. Overall Dimensions of Chair Seat Height - 45.0 cm. Height - 84.5cm. Width-57.5 cm and Depth-67.8 cm.HSN CODE-94016900 Ground Floor 133 50014308 VFC Filling Cabinet 1320H x 470W x 620D Supplying and placing in position Filling Cabinet Vertical Filing Cabinets whcih use less floor space. Size of 4 Drawer VFC shall be 1320mm(H) X 470mm(W) X 620mm(D). All the components shall be made of CRCA . It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. The Top, Side & Drawer Front thickness should be 0.7mm. The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on Drawer Fronts. In addition, 28 ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back of thickness 20mm per drawer can be hanged in VFC. The Centralized locking System shall be provided along with Shooting Bolt Mechanism and 10 Lever Cam Lock. The VFC should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The finishing shall include Epoxy powder coated to the thickness of 50.HSN CODE-94031010 Ground Floor 134 50014310 Bed:APO Bunk Bed+Mattress with Pillow Providing, supplying and placing of Bunk Bed BED FRAME BED FRAME ASSEMBLIES 2 NOS. ARE WELDED OF SIDE FRAME & INNER SLAT. THE SIDE FRA ASSEMBLY ARE MADE OF RECT. TUBE 50.8 x 25.4 X 1.2MM. ASSEMBLY INNER SLAT IS SQ. TUBE OF 25.4 X 1.2 MM THK MS ERW TUBE IS:7138 GRADE.HEAD BOARD & TAIL BOARD MOSOITO ROD:-HEAD BOARD & TAIL BOARD ARE MADE UP OF SO. PIPE 38.1 X 1.6MM THK, SQ 25.4 X 1.2MM THK MS ERW TUBE IS: 7138 GRADE SUPPORT BRACKET 3.2MM THK MS SHEET IS: 513 AND CONNECT WITH BED FRAME WITH MA NUT &BOLT,MOSQUITO ROD OF $19.0 X 1.0 MM THK MS ERW TUBE TO BE FIT IN #22 X 1.0MM THK MS ERW TUBE & BOTH TUBE IS OF IS: 7138 GRADE, HOOK IS PROVIDED AT THE TOP OF ALL ROD. LADDER ASLY - LADDER ASSY IS MADE UP OF RECT 50.8 X 25.4 X 1.2MM THK & SO. 25.4 X 1.2MM THK MS ERW TUBE IS: 7138 & CONNECTED WITH BED FRAME SIDE SUPPORT :- SIDE SUPPORT IS MADE OF #25.4 X 1.2MM THK & #19 X 1.2MM THK TUBE CONNECTED WITH BED FRAME USING MB NUT & BOLT. CLADDING -12mm THK PLY.HSN CODE-94032090 Ground Floor 135 50014312 Providing, supplying and placing of Personal Locker Product Size - 375(W) x 470(D) x 1950*(H) *Height including leveler* Height of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction.The add-on units are stack widthwise to form a row of Lockers. (Note- Single Main unit should not be offered. Minimum 1Main +1Addon to be offered, Maximum 1Main + 4Addon to be offered) Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA D Grade as per IS- 513 - CRCA D Grade as per IS-513Doors (Without envelope slot) - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing hinge.Door size - For 4 Door locker - 373(W) X 18(T) X 473(H)Cam Lock - Oval knob that functions as a handle- Click action mechanism- Key removal in locked and unlocked position- Zinc alloy die cast housing Shelving - 3 Shelves for 4 Door locker without envelope slot.HSN-94031010 Ground Floor 136 50014314 Cafepod Table Supplying and placing in position cafeteria table of the following specifications with size shall be 800 Width mm x 800 Depth mm x 742.5 Height mm . The top shall be stainless steel top of size : 800 mm x 800 mm x 1.2 mm thick . Top Assembly shall be 24 mm thick also top shall be made from 1.2 mm thick SS - 304 Brushed steel finish sheet . The Welded Stiffener assembly made from 0.6 mm thick SS - 304 sheet glued with top with special glue .Understructure shall be foldable and stackable , made with combination of aluminium and plastic . Centre column is of Aluminium extrusion of diameter 70 mm , which is anodized . Base is made in 2 pieces of die cast aluminium with buffed finish . It is bolted together with centre column and top flange .HSN CODE-94031010 Ground Floor 137 IPH 138 10000314 Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3- 2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification.Porcelin 23 inch LWC(ORISSA Pan) Ground Floor 139 10001056 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 mtr. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 20 mm outer dia CPVC pipes. Ground Floor 140 10001058 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 25 mm outer dia CPVC pipes. Ground Floor 141 10001060 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 40 mm outer dia CPVC pipes. Ground Floor 142 10001062 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 50 mm outer dia CPVC pipes. Ground Floor 143 10001064 Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method; water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid for separately). 110mm dia. SWR pipe of Single Socket Push fit of class-3 (6Kg/Sq.cm). Make:- ORIPLAST/SUPREME/FINOLEX. 110mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm). Ground Floor 144 10001066 Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method with water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid separately). 160mm dia. rigid UPVC SWR pipe Class- 3 (6Kg/Sq.cm). Make: ORIPLAST/SUPREME/FINOLEX. 160mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm). Ground Floor 145 10001068 Providing and fixing on wall face PVC 110 mm dia. offset SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. offset PVC SWR type. Ground Floor 146 10001070 Providing and fixing on wall face 110mm dia. single junction with door PVC SWR type moulded fittings, accessories for Rigid UPVC SWR pipes conforming to IS : 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion . Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Single Junction with door PVC SWR type. Ground Floor 147 10001072 Providing and fixing on wall face 110mm dia. plain bend PVC SWR type moulded fittings / accessories for Rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Plain Bend PVC SWR type. Ground Floor 148 10001074 Providing and fixing on wall face 110mm dia. bend with door PVC SWR type moulded fittings / accessories for rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Bend with door PVC SWR type. Ground Floor 149 10001076 Providing and fixing on wall face 110 mm dia. cowel PVC SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. cowel PVC SWR type. Ground Floor 150 10001088 Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc. all complete as per specification with 1:4 brick work in cement mortar (1:4) and 12mm thick cement plaster. For 250mm thick wall. Ground Floor 151 10001094 Cutting holes in R.C.C floor and roofs up to 19cm thick for passing G.I/PVC pipes and fittings etc. and repairing the hole after insertion of pipes etc. with cement concrete (1:2:4) including finishing complete so as to make it leak proof. Details cost of 1 hole of average size 15cm X 15cm X 25cm. Ground Floor 152 10001096 Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete, with cement concrete (1:3:6) and 12mm cement plaster (1:3) along with Cement punning. Ground Floor 153 10001098 Fixing floor traps of the following nominal diameter of outlet of self cleaning design with serewed down or hinged grating with or without vent arm complete includingcost of cutting and making good the walls and floors all complete as per specification. 110mm INLET & OUTLET FLOOR TRAP.make: ORIPLAST/SUPREME/FINOLEX 110mm Dia Inlet & Outlet floor trap PVC SWR type. Ground Floor 154 10001100 Providing and fixing EWC Commode floor mount(S/P trap) conforming to IS 2556: Part 3- 2004 duly fixed to head less socket caps/wall plugs and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification without cistern - Long pattern size 575x345x390mm. Make: Hindware POPULAR (CAT NO-20044 S-TRAP-28.5/P-TRAP-18.0)/Parryware ELITE (P-TRAP-CO278/S-TRAP-CO297) White Vitreous China Wash Down Water Closet (EWC). Ground Floor 155 10001102 Fixing of Back to wall WC with UF soft close seat cover, hinges, accessories set with rack bolt 12mm dia stainless steel Size(360x51 5x410mm) (FOR DISABLED) Floor Mounted to the floor fixed to head less socket caps/wall plugs and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification WITHOUT CISTERN. make: JAQUAR (DIS-WHT-9 3955P180UF)/ KOHLER(K-2983IN-S-O) DISABLED PERSON COMMODE Ground Floor 156 10001116 Providing and Fixing PVC LOW LEVEL CYSTERN conforming to IS 2556 : Part 3- 2004 SIZE 415X130X305mm.Make: Hindware SUPERB (CAT NO-50 8829)/Parryware SLIMLINE ECONOMY (E-8090).White Vitreous china 10 litre (full flush) capacity manually controlled low level flushing cistern with all fittings and fixtures. Ground Floor 157 10001118 Providing and fixing stainless steel kitchen sink with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Size 600X450X225mm Steel Sink Matt single bowl. Make: (Parry ware(C857272)/Hindware(KS FLAMINGO)). Stainless steel kitchen sink - 600X450X225mm Single bowl. Ground Floor 158 10001122 Providing and fixing of Standing urinal including connecting the urinal with 32mm dia. PVC waste pipe by means of white lead mixed with chopped hemp,15mm dia. PVC Reinforced heavy duty connection pipe etc. all complete as per specification. (White vitreous china clay half stall urinal flat back size-355X345X535 mm. Make: JAQUAR(URS-WHT-13261). Standing Urinal 355x345x535mm. Ground Floor 159 10001124 Providing and fixing of 25mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 25 mm dia. CPVC Full Way Valve / Ball Valve. Ground Floor 160 10001126 Providing and fixing of 40mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 40 mm dia. CPVC Full Way Valve / Ball Valve. Ground Floor 161 10001132 Providing and fixing of 15mm dia. CP Screw-down two way Bib Cocks (Taps)polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux headand high quality). Make: JAQUAR( CON-041KN)/ KOHLER (K-25432IN-4-CP). 15mm dia. Two-way Short body bib cock. Ground Floor 162 10001134 Providing and fixing of 15mm CP dia. Screw-down long body Bib Cocks (Taps) polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux Headand high quality). Make: JAQUAR( CON-107KN)/ KOHLER (K-27490IN-CP) 15mm dia. Long body bib cock. Ground Floor 163 10001136 Providing and fixing of 15mm dia. CP Screw-down angle Stop Cocks with flange of the following nominal sizes as per specification complete. (Deluxe Head and high quality). Make: JAQUAR (CON-059KN))/ KOHLER (K-11568IN-7B-CP). 15mm diameter Angle Stop Cock. Ground Floor 164 10001138 Providing and fixing of Screw-down 15 mm CP concealed Stop Cock with fitting sleeve, operating lever and adjustable wall flange and concealed body conforming to of the following nominal sizes as per specification complete. (Deluxe Headand high quality). Make: JAQUAR-(CON-083FTK+ALD-083FT). 15mm diameter Concealed Stop Cock. Ground Floor 165 10001140 Providing and fixing of 15mm dia. CP overhead shower rose 100mm round with rubit cleaning system including polishing all complete as per specification.(Deluxe Head and Heavy quality). Make: JAQUAR (OHS-1989)/ KOHLER (K-163561N-A-CP). 100 mm diameter / 15 – 20 mm width shower rose. Ground Floor 166 10001142 Providing and fixing of 15mm dia. CP shower arm 160mm long light body round shape for wall mounted with flange. including polishing all complete as per specification. (Deluxe Head and Heavy quality). Make: JAQUAR (SHA -477)/ KOHLER (K-99054IN-CP). 15 mm x 160 mm long size CP shower arm. Ground Floor 167 10001146 Providing and fixing of health faucet with 1.2m long PVC tube and wall hook. Make: JAQUAR (ALD-563) including all complete as per specification. 1.2m long PVC tube CP health Faucet. Ground Floor 168 10001148 Providing and fixing Stainless Steel soap dish holder fixed to head less socket caps, wall plugs with CP brass screws as per specification. Make: JAQUAR (ACN-1131N))/KOHLER (K-10712D-CP). Stainless Steel Soap Dish Holder. Ground Floor 169 10001150 Providing and fixing of 600x120 mm glass Shelf with anodised aluminium angle frame with chromium plated brassbrackets and guard rails of required size complete, fixed to head less socket caps, wall plugs with chromium plated brass screws as per specification. Size 600x120 mm glass shelf. Make: AQUAR-(ACN-1171N)/ KOHLER(K5636IN-CP). 600mmX120mm Glass Self. Ground Floor 170 10001152 Providing and fixing standard sized stainless steel towel rail of 600mm long complete with Chromium Plated brass brackets; fixed to head less socket caps, wall plugs with Chromium Plated brass screws, complete as per specification. (Make: JAQUAR (ACN-1111SM)/ KOHLER (K-5630IN-CP),(Heavy quality). 25 x 600 mm long SS Towel Rail. Ground Floor 171 10001154 Providing and fixing standard sized stainless steel towel ring with round flange complete with Chromium Plated brass brackets; fixed to head less socket caps/wall plugs with Chromium Plated brass screws, complete as per specification. Make: JAQUAR (ACN-1121BN) /KOHLER (K-5631IN-CP). SS Towel ring with round flange. Ground Floor 172 10001158 Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to head less socket caps, wall plugs and washers complete as per specification.(AR-2013,SL. NO.-3.4.26). Make: Mirror Glass (SAINT GOBIN/AIS(ASAHI)). 600mm x450mm Bevelled Edge Mirror (Heavy quality). Ground Floor 173 10001160 Providing and fixing Rotational moulded polyethylene cylindrical vertical water storage tank 3layer wall conforming to IS : 12701--1996 including cutting holes through the tank and fixing, fittings CPVC tubes and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting up to a height of 5 metres above ground level and placing the tank to the required position etc. all complete as per specification. Make: SINTEX/SUPREME/ORIPLAST. Triple Layer Cylindrical Vertical water storage tanks. Ground Floor 174 10001166 Fixing wash basins WITHOUT PEDESTALwith hole for pillar taps with 10mm dia M S rack bolt (JAQUAR MAKE) painted white including cutting holes in walls and making good the damages etc all complete, with fixing of 15mm dia pillar cock, as per specification.(Vitreous china flat back wash basin 550x400x200 mm)(CODE CNS-WHT-801 JAQUAR MAKE).Pillar cock(CON-021 JAQUAR)32mm full/half thread CP waste(ALD-705/709-JAQUAR), Rack bolt(ZPS-MST-RB03)Vitreous china flat back wash basin 550x400x200mm . Ground Floor 175 10001170 Providing and fixing of Metropole flush valve dual flow,32mm concealed body with exposed shutoff provision and 100mm square plate, 3.0/6.0 litre per flushing. Make: JAQUAR (FLV-1085 NSQ),fixing accessories with accessories set. Concealed Flushing Cistern. Ground Floor 176 10001172 Providing and fixing of 692mm long stainless steel grab bar handle (FOR DISABLED)fixed to head less socket caps, wall plugs and chromium plated screws as per specification . Make: JAQUAR (WAC-WHT-BR0600N) 692mm long stainless steel grab bar handle. Ground Floor 177 10001174 Providing and fixing of stainless steel vertical swing grab bar (FOR DISABLED) fixed to head less socket caps, wall plugs and chromium plated screws as per specification. Make: JAQUAR (WAC-WHT-BG0800N) Stainless steel vertical swing grab bar. Ground Floor 178 10001209 Providing and fixing curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish size H:900XW:450mm with stainless Steel brackets including cutting holes in wall and making good the damages etc. complete as per specification. Make: JAQUAR (JSE-CHR-110UC450X/110US450X). Curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish. Ground Floor 179 MIS-CVL-Area Concr 180 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 181 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 182 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 183 50001782 Filling bitumen and cement and jute fibre in expansion joints inclusive of cost of materials, bitumen and cement propertion(3:1), including cleaning before pouring 12mm to 25mm and 15 cm depth. Ground Floor 184 50011616 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR COLUMN FOOTING) Ground Floor 185 50013548 Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984. Ground Floor 186 MIS-CVL-Area Pavin 187 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 188 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 189 50001701 Providing and laying 80 mm thick Factory made cement concrete interlocking Paver block of M40 grade made by block making machine with strong vibratory compaction and approved size and design/ shape laid in required colour and pattern over and including 50 mm thick compacted bed of coares sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-In-Charge. Ground Floor 190 50011883 Construction of Granular Sub-Base (Gr-IV) by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401of MoRT&H specifications for Road & Bridge Works (4th Revision). Vide AR-2006, Page-160,Item-39 . Ground Floor 191 50013548 Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984. Ground Floor 192 MIS-CVL-Boundary w 193 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 194 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 195 50000008 Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. Ground Floor 196 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 197 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 198 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 199 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 200 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 201 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 202 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 203 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 204 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 205 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 206 MIS-CVL-Bus Washin 207 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 208 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 209 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 210 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 211 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 212 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 213 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 214 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 215 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 216 MIS-CVL-CC Road 217 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 218 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 219 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 220 50001782 Filling bitumen and cement and jute fibre in expansion joints inclusive of cost of materials, bitumen and cement propertion(3:1), including cleaning before pouring 12mm to 25mm and 15 cm depth. Ground Floor 221 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 222 50011101 Providing and laying in position 200mm thick Tremix/VDF flooring P.C.C. M-30 grade concrete using 20mmnominal size HBG down graded chips for plain cement concrete work using cement content 400kg/cum as per approved design mix having continious agitated mixer,mis design of specified grade for reinforced cement concrete work and for VDF floorng using screed board vibrator,placing of filtermat(nylon cloth to act as very fine filter),top mat (large single PVC sheet),Vaccume process using vaccume pump about 0.08MPA which ruduces water content about 15-20% ,power trawelling,brooming,T&P Charges including power,loading,unloading and hire charges,making grooves of 6mm wide and 25mm deep @ 1.5m C/C both ways ,filling the joints with sealing compound of approved quantityGrade-A(Ref:DSR-SH 16.46.1) with cost of material ,labour,conveyance,royalty etc. complete basing on IS 256:2000 minimum slump is 25mm to 75mm and minimum thiockness is 125mm . Ground Floor 223 50011103 Painting runway/taxi/track/apron marking with adequate nos of coats (minimum 2coats) to give uniform finish with road marking paint Based on solvent based acrylic resin has UV resistant colours of superior make (water based) i/c cleaning the surface of all dirt scales, oil, grease and other foreign material etc. and lining out complete. For new road work. Ref: DSR-16.47.1.Make(Asian paints:APCOTRAK, Berger:ROAD MARKING PAINT, Dulux :PROFESSIONAL WEATHER SHIELD ANTI-CARB)[NEW-NSWI] Ground Floor 224 50011883 Construction of Granular Sub-Base (Gr-IV) by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401of MoRT&H specifications for Road & Bridge Works (4th Revision). Vide AR-2006, Page-160,Item-39 . Ground Floor 225 50013548 Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984. Ground Floor 226 MIS-CVL-Cow Catche 227 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 228 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 229 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 230 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 231 50005727 Prividing,Fittin & fixing of cow catcher,made out of steel work (TATA make GI pipe circular hollow of 100 mm OD as per IS 1239[P-1] 4 mm thick) including RS joist of size ISLB 150X80 with cutting requird size ,welding using MS flat of 40X6mm size,fixing in position with approvd design and specification including all fitings and applying a priming coat of approvd steel primer etc all complete as per the direction & instruction of the Engineer-in-charge of the work.DATA FOR size 16X5= 80 sft Ground Floor 232 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 233 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 234 50011560 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC WALLS). Ground Floor 235 MIS-CVL-DG Shed 236 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 237 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 238 50000008 Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. Ground Floor 239 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 240 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 241 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 242 50000884 Enamel painting two coats including cost of all materials cleaning,brushes,putty etc. Ground Floor 243 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 244 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 245 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 246 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 247 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 248 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 249 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 250 50011936 Supplying and fixing of TATA Blue scope Steel Sheet Roofing of 0.52 mm thick as per attached Quoatation in roof drilling holes in wind ties including fixing of ridges valleys wind ties and cost of fittings.[NEW-NSWI] Ground Floor 251 MIS-CVL-Drivers R 252 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 253 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 254 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 255 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 256 First Floor 257 Second Floor 258 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 259 First Floor 260 Second Floor 261 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 262 First Floor 263 Second Floor 264 50000044 Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ). Ground Floor 265 50000057 Drip course mould plaster 1:4 (1:cement :4sand) including necessary scaffolding curing etc. complete at all depth and height. Ground Floor 266 First Floor 267 50000568 Kotah stone flooring in floors,treads rise and landing on 25mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing etc complete including cost of tile, material, labour T & P etc complete. Ground Floor 268 50001152 Providing & fixing aluminium work (min.thickness of powder coating 50 micron) for structural glazing including required scaffolding for fixing the aluminium sections for extruded builtup standard tubural & other sections of approved make confirming to IS:733 and IS:1285 fixing with rawl plugs & screws or with expansion hold fasteners including necessary fillings up gaps at junctions at top,bottom & sides with cement mortar,aluminium sections shall be smooth,rust free ,straight,mitred & jointed mechanically,the glazing will be 5mm thick,coloured,reflective glass of approved colours & make (SAINT GOBAINI) fixed in aluminium sections upto required height & joints filled clear weather silicon sealant etc complete in all respect as per the direction of EIC/Architect in charge. Ground Floor 269 First Floor 270 Second Floor 271 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 272 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 273 First Floor 274 Second Floor 275 50001311 Fly Ash brick masonary in cement mortar 1:4:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 276 First Floor 277 50005074 Supplying, installing RO +UV+UF+TDS control+UV in-tank and zero water wastage technology with active cupper technology, wall mounted water purifier aquaguard capacity up to 20L/hr(Make KENT-grand star/Eureka Forbes)[N.S.W.I] Ground Floor 278 50010026 Supplying, Fitting and fixing of glass reinforced concrete(GRC) screens 30mm to 32mm thick (Dry density>1800 kg/cum) on wall (Wall cladding) and module of 1.5 sqm of approved quality/ pattern shall be synthetic rubber/ FRP moulded in size, pattern, design, colour and thickness. The screens made of 53 grade white cement make Birla/JK cement, quartz, fine silica sand, alkali resistance glass fiber, super plastisizer, polymers and UV resistant synthetic inorganic pigments etc. The screen shall be fixed by dry fixing method with appropriate SS pipe 304 grade ‘L’ shaped clamps & cleat, using fasteners and necessary hardware, etc. Including MS scaffolding in building façade. The rate shall be included the structural steel frames (Horizontal & vertical members) support to hold the GRC jalli at required building height to withstand wind pressure as per IS 875(prt-3):2015. The cost includes labour, materials, transportations, T&P, etc. all complete as per direction of Engineer-in-Charge. The screen must have compressive strength>400kg/cm2 ,wet transverse strength > 7 N/mm, thermal conductivity1.63 W/m-K at 3% moisture content, water absorption<(><<)> 5% of dry weight. [NEW-NSWI] Ground Floor 279 First Floor 280 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 281 First Floor 282 Second Floor 283 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 284 First Floor 285 Second Floor 286 50010384 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC SILL BAND) Ground Floor 287 First Floor 288 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 289 50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor 290 First Floor 291 Second Floor 292 50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor 293 First Floor 294 Second Floor 295 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 296 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 297 First Floor 298 Second Floor 299 50010458 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement. (FOR RCC FINS) Ground Floor 300 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 301 First Floor 302 Second Floor 303 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 304 First Floor 305 Second Floor 306 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 307 First Floor 308 Second Floor 309 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 310 First Floor 311 Second Floor 312 50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor 313 First Floor 314 Second Floor 315 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 316 First Floor 317 Second Floor 318 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 319 First Floor 320 Second Floor 321 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 322 First Floor 323 Second Floor 324 50010668 Providing and Fixing of Factory made WPC Door Frame of size 125x65 provided with plug-in socket arrangement and joined together by screws. The finished door frame units to be of approved colour using high quality pigments complete in all respect as per specification. [NSWI] WPC Frame make:-Century/Green Ground Floor 325 First Floor 326 50010680 Providing and fixing of ISI marked 30 mm thick Flush door Shutters (Single leaf) finished with 1mm thick lamination both side total thickness of 32mm flush door Shutter with 4 Nos SS butt Hinges (125 mm x 85 mm x 5.5 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 1 No SS Aldrop (400mm X 300mm x 16mm dia rod), 1 No Floor type double door stopper, 2 Nos SS Handle of size 150mm, Teak wood Leaping around the edges, 1 No. Back Buffer with all materials,adhesives etc complete. (Excluding door closure, ornamental handle and Mortise Lock). [NSWI] Make:- BWP Flush door (Century Sainik 710 / Green marine gold 710), Laminate (Greenlam/ Centurylam,Marino),Hard ware fittings (Godrej). Ground Floor 327 First Floor 328 50010704 Providing and Fixing of Single leaf solid WPC door shutter of 30 mm thick compacted with wood grain finished with 2 Nos SS Handles (150 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 4 Nos. SS Butt Hinges (125mm x 8.5mm x 5.5mm ) with all necessary fittings Complete with approved colour . [NSWI]Make:- WPC Door(Century/Green), Hard ware fittings (Godrej). Ground Floor 329 First Floor 330 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 331 First Floor 332 Second Floor 333 50010827 Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with Balustrade of size 38mm x 38mm x 2mm @ 900mm C/C, stainless steel square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification and the entrance newel post will be 100mm dia. of 750mm height with top bulb, buffing, polishing etc. with cost, conveyance, labour, T and P etc. required to complete in all respect. [NSWI] Stainless steel Brand:- JINDAL/NIPPON STEEL. Ground Floor 334 First Floor 335 50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. Ground Floor 336 First Floor 337 50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor 338 First Floor 339 50011029 Providing and painting the mural art painting work on wall/floor/ceiling by the selected artist/ agencies to make the art most visible of the stretch. The work includes scraping and cleaning of wall, painting one primer coat and one weather seal coat (Asian/ Berger/Dulux), applying paint for mural art painting. The paint must have a durability of at least 5 years. The cost of the work includes all the labour, man power, scaffolding, transportation, materials required, fooding, etc. for execution of the mural art to give the finish product. It must be noted that, the height shall be calculated from the point where the painting starts till the point it continues and ends. UPTO 3M HEIGHT Ground Floor 340 First Floor 341 50011397 Providing and fixing of factory-made 2Track 2Panel uPVC Sliding window (White Colour) frame size 70X50mm and Sash size 45X60mm complete up to and including 1.5m high, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.5 mm – 2.5 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber. The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.5mm to 2.5mm. UPVC Windows & Doors must be fabricated with fusion welded /Zip welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be minimum of 5mm clear Toughened Glass (SAINT GOBAIN/AIS) with weather seal (EPDM/TPE). After placing 5 mm clear Toughened glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system (holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes) shall be provided. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm) (UV treated silicon for outer frame sealing & Acrylic paintable silicon for inner frame sealing), complete in all respect. Standards & Tests: Follow the British Standard (BS EN 12608, UK, CEPT Ahmedabad, tested by Central Building Research Institute, Roorkee Shriram Institute of Industrial Research, New Delhi. All technical specification having wall thickness of min 2.0 mm(+-.02mm) with TPE gasket, wool pile with rollers, fasteners for fixing frame to finalised wall and necessary screws etc. and glass should be single glass with glazing bead of appropriate dimension. Reinforcement of galvanised mild steel with thick ness of 1.5 mm to 2.5 mm has to put throughout the Frame, glass shutter and mesh shutter. Glass support beading make of upvc sections will be fixed with TPE gasket to keep glass tight and unmoved. Multi point locking system (called Pop Up) made out of casted zamac with white powder coated and locking hook will make of SS304 grade material. Aluminum guide rail will be fixed on the Bottom part of frame on which the glass shutters will run. The roller will make of nylon and having capacity of 40-120 kg depend on glass weight. Fin seal will be provided to protect the dust in between closing point &interlocking point of glass & mesh shutters. Mesh panel (Fibre mesh & SS mesh) can also be provided depending upon the requirements of window and location wise. This cost includes fixing, wastage, transportation, labour, material, etc. complete. (NSWI SPECIAL) Make:(FENESTA/SAINT-GOBAIN) Ground Floor 342 First Floor 343 50011406 Providing and fixing of factory-made 3Track 3Panel UPVC Sliding window (White Colour) frame size 128X50mm and Sash size 45X70mm complete up to and including 1.5m high, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.5 mm – 2.5 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber. The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.5mm to 2.5mm. UPVC Windows & Doors must be fabricated with fusion welded /Zip welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be minimum of 5mm clear Toughened Glass (SAINT GOBAIN/AIS) with weather seal (EPDM/TPE). After placing 5 mm clear Toughened glass in the sash, UPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system (holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes) shall be provided. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm) (UV treated silicon for outer frame sealing & Acrylic paintable silicon for inner frame sealing), complete in all respect. Standards & Tests: Follow the British Standard (BS EN 12608, UK, CEPT Ahmedabad, tested by Central Building Research Institute, Roorkee Shriram Institute of Industrial Research, New Delhi. All technical specification having wall thickness of min 2.0 mm(+-.02mm) with TPE gasket, wool pile with rollers, fasteners for fixing frame to finalised wall and necessary screws etc. and glass should be single glass with glazing bead of appropriate dimension. Reinforcement of galvanised mild steel with thick ness of 1.5 mm to 2.5 mm has to put throughout the Frame, glass shutter and mesh shutter. Glass support beading make of upvc sections will be fixed with TPE gasket to keep glass tight and unmoved. Multi point locking system (called Pop Up) made out of casted zamac with white powder coated and locking hook will make of SS304 grade material. Aluminum guide rail will be fixed on the Bottom part of frame on which the glass shutters will run. The roller will make of nylon and having capacity of 40-120 kg depend on glass weight. Fin seal will be provided to protect the dust in between closing point &interlocking point of glass & mesh shutters. Mesh panel (Fibre mesh & SS mesh) can also be provided depending upon the requirements of window and location wise. This cost includes fixing, wastage, transportation, labour, material, etc. complete. (NSWI SPECIAL) Make:(FENESTA/SAINT-GOBAIN) Ground Floor 344 First Floor 345 Second Floor 346 50011486 Supplying, Fitting & Fixing of Anti-Skid Vitrified Tile (PREMIUM QUALITY) on floors of size 600mm x 600mm x 9 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY TECHSTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor 347 First Floor 348 50011926 Providing & applying water proofing treatment on SITC of Sunken floor treatment Stage1:Cleaning of concrete surface to remove dust,oil ,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any ,with Sika Latest modified repair mortar including a coat of bonding agent. Stage2:supply and application of 1:3 cement-sand mortar ,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area. Stage3:Supply and application of Sika Top Seal 107-the cementitious ,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied. Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C ,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10% (Make:- MYK or Sika or BASF) Second Floor 349 50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Ground Floor 350 First Floor 351 50012200 System Aluminum Casement System Doors – Double Leaf Swing single glazed door Providing and fixing System Aluminum works for casement systems door having door frame 55mmx40mm, shutter 70mmx40mm, door bottom transom 150mmx40mm, central profile 47.3x42.9mm, grazing bead 31.8mmx17.85mm with glazing of single glass panel without middle transom made of non-euro groove architectural aluminium profile. The extruded aluminums sections should be T6 tempered made from Grade 6063 alloy, approved shade of pure-polyster/ hybrid surface coating Anodized (50-60-micron powder coat), silicon coated to suit marine atmosphere. All profiles should be None insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacture. The drainage slots provided at the bottom part of the frame/sash on the outerside & weather strip siliconased brush gasket will be provided. 6mm Clear Toughend Glass (Saint-Gobain / AIS) infill fitted unto Sash/Frame using micro-wave treated siliconised EPDM gasket. The casement systems having hardwares SS handle (22mmx300mm), mortise lock with both side key cylinder, floor spring. Wall Thickness - Aluminium: 1.5mm. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. This cost includes labour, materials, wastage, transportation at site, fixing, fittings, etc. all complete. (Make :- FENESTA/ REKLAD) Ground Floor 352 50012828 Supply and fixing of MCM Modified Clay Material ‐ MCM A 300X600 mm of PHOMI make,as per company standard dimension, pattern, colour as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 and European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15.The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in‐charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in‐charge. Make-Phomi Ground Floor 353 First Floor 354 50013241 Supplying, Fitting & Fixing of full body Vitrified Tile (SUPER PREMIUM QUALITY) on floors of size 600mm x 600mm x 10 mm with s elf-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete.The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free, coefficient of friction greater than 0.34. Make: (JOHNSON MARBONITE/ SOMANY DURASTONE/ KAJARIA E-SHIELD)Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER(HS Tile grout)/DULUX (epoxy grout) [NSWI] Ground Floor 355 First Floor 356 50013261 Providing, Fixing & Fitting Ceramic glazed tiles (SUPER PREMIUM QUALITY) on wall of size 300mmx600mm of approved shade on 12mm thick cement mortar of mix (1:3) and grouted with epoxy grout including cost, conveyance, loading, unloading, stacking, royalties of all Materials, cost of all Labour, Sundries, T & P required for the work, etc. complete in all respect. (JOHNSON/SOMANY/KAJARIA) [NSWI] Ground Floor 357 First Floor 358 MIS-CVL-EV Chargin 359 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 360 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 361 50000008 Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. Ground Floor 362 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 363 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 364 50005597 Providing TEXTURED POLYCARBONATE sheet with all its accessories etc complete as per the direction & instruction of the E.I.C. [N.S.W.I] Ground Floor 365 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 366 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 367 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 368 50011496 Supplying, Fitting & Fixing of Industrial parking heavy duty Vitrified Tile (PREMIUM QUALITY) on floors of size 300mm x 300mm x 10 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY DURASTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor 369 MIS-CVL-Entry & Ex 370 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 371 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 372 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 373 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 374 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 375 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 376 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 377 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 378 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 379 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 380 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 381 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 382 MIS-CVL-Inspection 383 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 384 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 385 50000008 Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. Ground Floor 386 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 387 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 388 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 389 50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor 390 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 391 MIS-CVL-Land Scapi 392 50002295 Planting of Nerium Olender 3 ht. ornamental plants, well established healthy disease free in poly bag/ big container Including transportation and delivery at sites. Ground Floor 393 50005655 Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts Unit = Sqm (CPWD 2.12,P-217)[N.S.W.I] Ground Floor 394 50005657 Supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment) (CPWD 2.2,P-213)[N.S.W.I] Ground Floor 395 50005659 Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm (CPWD 2.4.3,P-214)[N.S.W.I] Ground Floor 396 50005661 Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).(CPWD 2.8,P-216)[N.S.W.I] Ground Floor 397 50005663 Providing & laying Selection no. 1 grass turf(Bermuda) with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same and maintenance for 30 days or more till the grass establish properly, as per direction of the officer in charge (CPWD 2.34,P-235)[N.S.W.I] Ground Floor 398 50005667 Planting of Murraya exotica 20 ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites. This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 8.46,p-372= Rs.15.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 154.49.[N.S.W.I] Ground Floor 399 50005669 Planting of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara, Mohan, Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) 45cm ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites.This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant9.40,p-381= Rs.40.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25 ,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 179.49 Ground Floor 400 50005671 Planting of Malpighia coccigera 21/2 ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites.This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 8.45,p-372= Rs.50.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 189.49[N.S.W.I] Ground Floor 401 50005673 Planting of Tecoma grandiflora 21/2 ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites.This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 9.13,p-383= Rs.40.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 179.49 Ground Floor 402 50005675 Planting of Allamanda cathartica 30 ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites.This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 9.10,p-381= Rs.45.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x0.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 184.49[N.S.W.I] Ground Floor 403 50005677 Planting of Jasmine humile (Yellow) o 30 ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites. This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 9.90,p-382= Rs.30.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x0.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 169.49.[N.S.W.I] Ground Floor 404 50005681 Planting of Hena 20 ht. well grown healthy plant species as per specified height all saplings are healthy grown well canopy,disease free etc. including transportation and delivery at sites.This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge . Plant 8.50,p-373= Rs.40.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 179.49(Say Rs.180.00)[N.S.W.I] Ground Floor 405 50005683 Planting of Fox tail palm 70 ht.ornamental decorative specimen plants well established healthy disease free in poly bag / big container including transportation and delivery at sites.Planting of each plant at specified location by application of fortilizer and pesticide as required as per instructio of Officer in-charge.This cost is including hoeing soil of size 3dia and 3 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge . a) plant 5.3,p-324=Rs.1183.00, stacking 7.44,p-349= Rs.650.00, digging hole 2.14.1,p-218= Rs 214.77, antitermite 2.54,p-246=Rs.92.68, shaping 2.38 ,p-236=Rs.53.60, cattle manure 2.25,p-224=Rs.374.12, fencing 2.23Sqm 2.58,p-248= Rs. 193.58x2.23= Rs 431.68 Total cost=2999.85(say Rs.3000.00) [N.S.W.I] Ground Floor 406 50006323 Filling & Leveling of site by JCB.[N.S.W.I] Ground Floor 407 50006324 Supplying planting of fruit plants including digging the pit & required quantity of fertilizer & pesticides such as mango water apple, jack fruit,guava, custand apple,count., lichu, jamun,star fruit ,tamarind,citrus lime,sapeta etc. Two to three year olds slpping at least two to six ft height depend on species as per direction of E.I.C.[N.S.W.I] Ground Floor 408 50006326 Maintenance Per Month including fertilizer pesticide, man power,grass cutting, straining, Seasonal flower all etc.[N.S.W.I] Ground Floor 409 MIS-CVL-Market Com 410 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 411 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 412 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 413 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 414 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 415 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 416 50000044 Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ). Ground Floor 417 50000057 Drip course mould plaster 1:4 (1:cement :4sand) including necessary scaffolding curing etc. complete at all depth and height. Ground Floor 418 50000937 Supply, Fitting and Fixing of Rolling Shutter including cost of Material & Labour Ground Floor 419 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 420 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 421 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 422 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 423 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 424 50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor 425 50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor 426 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 427 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 428 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 429 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 430 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 431 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 432 50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor 433 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 434 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 435 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 436 50010815 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm of size hard granite chips with chicken welded mesh 25mmx25mm 11 gauge on new work including cost of labour, material, T and P etc. all complete. Ground Floor 437 50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. Ground Floor 438 50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor 439 50011029 Providing and painting the mural art painting work on wall/floor/ceiling by the selected artist/ agencies to make the art most visible of the stretch. The work includes scraping and cleaning of wall, painting one primer coat and one weather seal coat (Asian/ Berger/Dulux), applying paint for mural art painting. The paint must have a durability of at least 5 years. The cost of the work includes all the labour, man power, scaffolding, transportation, materials required, fooding, etc. for execution of the mural art to give the finish product. It must be noted that, the height shall be calculated from the point where the painting starts till the point it continues and ends. UPTO 3M HEIGHT Ground Floor 440 50011926 Providing & applying water proofing treatment on SITC of Sunken floor treatment Stage1:Cleaning of concrete surface to remove dust,oil ,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any ,with Sika Latest modified repair mortar including a coat of bonding agent. Stage2:supply and application of 1:3 cement-sand mortar ,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area. Stage3:Supply and application of Sika Top Seal 107-the cementitious ,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied. Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C ,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10% (Make:- MYK or Sika or BASF) Ground Floor 441 50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Third Floor 442 50013241 Supplying, Fitting & Fixing of full body Vitrified Tile (SUPER PREMIUM QUALITY) on floors of size 600mm x 600mm x 10 mm with s elf-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete.The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free, coefficient of friction greater than 0.34. Make: (JOHNSON MARBONITE/ SOMANY DURASTONE/ KAJARIA E-SHIELD)Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER(HS Tile grout)/DULUX (epoxy grout) [NSWI] Third Floor 443 MIS-CVL-Pump room 444 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 445 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 446 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 447 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 448 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 449 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 450 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 451 50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor 452 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 453 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 454 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 455 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 456 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 457 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 458 50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor 459 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 460 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 461 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 462 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 463 50010827 Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with Balustrade of size 38mm x 38mm x 2mm @ 900mm C/C, stainless steel square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification and the entrance newel post will be 100mm dia. of 750mm height with top bulb, buffing, polishing etc. with cost, conveyance, labour, T and P etc. required to complete in all respect. [NSWI] Stainless steel Brand:- JINDAL/NIPPON STEEL. Ground Floor 464 50011560 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC WALLS). Ground Floor 465 MIS-CVL-RCC Drain 466 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 467 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 468 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 469 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 470 50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor 471 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 472 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 473 MIS-CVL-Security S 474 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 475 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 476 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 477 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 478 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 479 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 480 50000044 Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ). Ground Floor 481 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 482 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 483 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 484 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 485 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 486 50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor 487 50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor 488 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 489 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 490 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 491 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 492 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 493 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 494 50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor 495 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 496 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 497 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 498 50010668 Providing and Fixing of Factory made WPC Door Frame of size 125x65 provided with plug-in socket arrangement and joined together by screws. The finished door frame units to be of approved colour using high quality pigments complete in all respect as per specification. [NSWI] WPC Frame make:-Century/Green Ground Floor 499 50010680 Providing and fixing of ISI marked 30 mm thick Flush door Shutters (Single leaf) finished with 1mm thick lamination both side total thickness of 32mm flush door Shutter with 4 Nos SS butt Hinges (125 mm x 85 mm x 5.5 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 1 No SS Aldrop (400mm X 300mm x 16mm dia rod), 1 No Floor type double door stopper, 2 Nos SS Handle of size 150mm, Teak wood Leaping around the edges, 1 No. Back Buffer with all materials,adhesives etc complete. (Excluding door closure, ornamental handle and Mortise Lock). [NSWI] Make:- BWP Flush door (Century Sainik 710 / Green marine gold 710), Laminate (Greenlam/ Centurylam,Marino),Hard ware fittings (Godrej). Ground Floor 500 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 501 50010815 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm of size hard granite chips with chicken welded mesh 25mmx25mm 11 gauge on new work including cost of labour, material, T and P etc. all complete. Ground Floor 502 50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor 503 50011029 Providing and painting the mural art painting work on wall/floor/ceiling by the selected artist/ agencies to make the art most visible of the stretch. The work includes scraping and cleaning of wall, painting one primer coat and one weather seal coat (Asian/ Berger/Dulux), applying paint for mural art painting. The paint must have a durability of at least 5 years. The cost of the work includes all the labour, man power, scaffolding, transportation, materials required, fooding, etc. for execution of the mural art to give the finish product. It must be noted that, the height shall be calculated from the point where the painting starts till the point it continues and ends. UPTO 3M HEIGHT Ground Floor 504 50011426 Providing and fixing of factory-made 3Track 3Panel UPVC Sliding window/Door (White Colour) frame size 128X50mm and Sash size 45X74mm completeabove 1.5m high, comprising UPVC multi-chambered frame having in-built UPVC roller track on top and UPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.5 mm – 2.5 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber.The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.5mm to 2.5mm. UPVC Windows & Doors must be fabricated with fusion welded /Zip welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be minimum of 6mm clear Toughened Glass (SAINT GOBAIN/AIS) with weather seal (EPDM/TPE). After placing 6 mm clear Toughened glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock & Multi Lock and rollers & proper drainage system (holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes) shall be provided. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm) (UV treated silicon for outer frame sealing & Acrylic paintable silicon for inner frame sealing), complete in all respect. Standards & Tests: Follow the British Standard (BS EN 12608, UK, CEPT Ahmedabad, tested by Central Building Research Institute, Roorkee Shriram Institute of Industrial Research, New Delhi. All technical specification having wall thickness of min 2.0 mm(+-.02mm) with TPE gasket, wool pile with rollers, fasteners for fixing frame to finalised wall and necessary screws etc. and glass should be single glass with glazing bead of appropriate dimension. Reinforcement of galvanised mild steel with thick ness of 1.5 mm to 2.5 mm has to put throughout the Frame, glass shutter and mesh shutter. Glass support beading make of upvc sections will be fixed with TPE gasket to keep gl ass tight and unmoved. Multi point locking system (called Pop Up) made out of casted zamac with white powder coated and locking hook will make of SS304 grade material. Aluminum guide rail will be fixed on the Bottom part of frame on which the glass shutters will run. The roller will make of nylon and having capacity of 40-120 kg depend on glass weight. Fin seal will be provided to protect the dust in between closing point &interlocking point of glass & mesh shutters. Mesh panel (Fibre mesh & SS mesh) can also be provided depending upon the requirements of window and location wise. This cost includes fixing, wastage, transportation, labour, material, etc. complete. (NSWI SPECIAL) Make:(FENESTA/SAINT-GOBAIN) Ground Floor 505 50011926 Providing & applying water proofing treatment on SITC of Sunken floor treatment Stage1:Cleaning of concrete surface to remove dust,oil ,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any ,with Sika Latest modified repair mortar including a coat of bonding agent. Stage2:supply and application of 1:3 cement-sand mortar ,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area. Stage3:Supply and application of Sika Top Seal 107-the cementitious ,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied. Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C ,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10% (Make:- MYK or Sika or BASF) Ground Floor 506 50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Ground Floor 507 50013241 Supplying, Fitting & Fixing of full body Vitrified Tile (SUPER PREMIUM QUALITY) on floors of size 600mm x 600mm x 10 mm with s elf-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete.The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free, coefficient of friction greater than 0.34. Make: (JOHNSON MARBONITE/ SOMANY DURASTONE/ KAJARIA E-SHIELD)Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER(HS Tile grout)/DULUX (epoxy grout) [NSWI] Ground Floor 508 MIS-CVL-Septic tan 509 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 510 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 511 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 512 50000018 4 thick dry brick rammed khoa well watered and fully consolidated complete,including cost of all materials as per direction of Engineer-in-charge. Ground Floor 513 50000019 25mm. thick A.S. Flooring with cement concrete 1:2:4 including punning using 12mm. size hard granite chips including cost of all materials T & P etc complete. Ground Floor 514 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 515 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 516 50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor 517 50001839 Fly Ash brick masonary work in cement mortar 1:4 (1 cement : 4 sand) using fly ash bricks of 23cm X 11cm X 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/-2% including watering,curing and cost,conveyance,royality of all m aterials and cost of labour etc complete.As per the direction of the E.I.C. Ground Floor 518 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 519 50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor 520 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 521 MIS-CVL-Site Devel 522 50001792 Supplying, filling or Spreading of moorum by mechanical means including cost of all labour,material T & P etc. complete as per the direction of Engineer-in-charge. Ground Floor 523 MIS-CVL-Water Puri 524 50008261 Supplying and fixing Aquaguard Storage Cooler–Cum-Purifier (80 Ltr. Capacity ) with all cost complete.[N.S.W.I] Ground Floor 525 MIS-CVL-Workshop 526 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 527 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 528 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 529 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 530 First Floor 531 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 532 First Floor 533 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 534 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 535 First Floor 536 50001692 Supplying, fitting,fixing and hoisting joists & M.S trusses and placing in position including cost of labour materials transportation etc.(make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)) Ground Floor 537 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 538 First Floor 539 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 540 50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor 541 First Floor 542 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 543 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 544 First Floor 545 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 546 First Floor 547 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 548 First Floor 549 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 550 First Floor 551 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 552 First Floor 553 50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor 554 First Floor 555 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 556 First Floor 557 50010813 Supplying, Fitting and Fixing Industrial Parking Vitrified Floor Tile of 10mm thick (SIZE 300X 300MM)on parking of approved shade laid on 25 mm thick cement mortar (1:1) and filling joints with epoxy grout (2mm) of approved quality including cost of all materials, labour T and P etc required for the works all complete. (For new work only) [NSWI]. Tile make:-NITCO/RAK/VARMORA , Epoxy Grout make:- ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout). Ground Floor 558 50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor 559 First Floor 560 50011936 Supplying and fixing of TATA Blue scope Steel Sheet Roofing of 0.52 mm thick as per attached Quoatation in roof drilling holes in wind ties including fixing of ridges valleys wind ties and cost of fittings.[NEW-NSWI] Ground Floor 561 50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Ground Floor 562 MIS-INE-ADMIN BUIL 563 40000946 Recessed wiring to Angle Holder Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havells/V guard/KEI) Make-switch /Angle holder-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 564 40000949 Recessed wiring to Tube Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 565 40000952 Recessed wiring to Calling Bell Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular bell push ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-bell push switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 566 40000958 Recessed wiring to Television Point (Modular)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/TV socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK). Ground Floor 567 40000961 Recessed wiring to Telephone Point (socket)with 2 pair 0.5sqmm telephone cable with 20 mm dia non metalic PVC flexible conduit with socket ISI marked MS Box including all accessories and connection.( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-s witch-Telephone socket -Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK). Ground Floor 568 40000967 Recessed wiring to Ceiling Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 569 40000970 Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 570 40000973 Recessed wiring to Exhaust fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 571 40000976 Recessed wiring to Security Light Point ( MODULAR)(1X36WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 572 40000979 Recessed wiring to Security Light Point ( MODULAR) (4X24WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 15 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 573 40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 574 40000985 Point wiring for 5/ 6 amp socket outlet ( Separate) ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 575 40000988 Point wiring for 15/16 amp socket outlet ( MODULAR) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 15/16 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 576 40000991 Point wiring for Computer Point ( MODULAR) with 2.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with3 Nos of 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 577 40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor 578 40001003 Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK) Ground Floor 579 40001006 Recessed wiring to submain in 2 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.4)(Make of PVC pipe-AKG/NORPACK) Ground Floor 580 40001012 Recessed wiring to submain in 4 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.10)(Make of PVC pipe-AKG/NORPACK) Ground Floor 581 40001015 Recessed wiring to submain in 4 x 10 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 4 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.11)(Make of PVC pipe-AKG/NORPACK) Ground Floor 582 40001039 Supply and laying of 50 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 583 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 584 40001129 Supplying and fixing of 6X4 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor 585 40001135 Supplying and fixing of 8X10 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam) Ground Floor 586 40001141 Supplying and fixing of two modular GI Box 18 swg with Modular base & cover for 2 module (Sl. No- 1301,1421)(Make-switch/Socke t-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 587 40001145 Supplying and fixing of 4 modular GI Box 18 swg with Modular base & cover for 4 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 588 40001148 Supplying and fixing of 6 modular GI Box 18 swg with Modular base & cover for 6 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 589 40001151 Supplying and fixing of 8 modular GI Box 18 swg with Modular base & cover for 8 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 590 40001154 Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 591 40001172 Supply of U-type fan hook(Make-TATA) Ground Floor 592 40001190 Supplying and fixing of Call Bell/buzzer ISI marked suitable for DC/AC single phase 230 volts complete as required (CSR sl no-1.30) Ground Floor 593 40001193 Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells) Ground Floor 594 40001234 supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 595 40001258 SUPPLY & FIXING OF POWER DISTRIBUTION BOX,MAKE-NET RACK/VAL RACK Ground Floor 596 40001703 Supply and fixing of 2 way single door MCB box with 1 no 32 AMP DPMCB with sheet steel encloser,distribution board,on surface /recess,complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,detachable gland plate,interconnection,phosphate and power painted including earthing etc as required(Sl no-2.3.6,2.7)[Make-(a)MCB -Legrand/L &T/ABB/SCHNIDER Ground Floor 597 40001876 Supply and fixing of 16 Amp top(for inverter installation) with all accessories and conncetion(Make-Legrand/wipro/Anchor-Panasonic) Ground Floor 598 40001879 Recessed wiring in 1X1.5sqmm (For inverter)/DG wiring )FR PVC insulated single core multistrand copper conducter of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick as per direction of Engineer in charge(Make of wire Finolex/Anchor/Havells/V guard)(Make of PVC pipe-AKG/NORPACK) Ground Floor 599 40002095 Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 600 40002179 Recessed wiring to Surface Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection .( Make of wire Finolex / L &T / Anchor / Havells/ V guard)Make-switch /-Legrand /Wipro /Anchor /havells /Panasonic) Ground Floor 601 40002886 Recessed wiring to bay light Point ( MODULAR) (45WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 15 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in charge . (Make of wire Finolex / L &T / Anchor / Havels/ V guard/HPL) Make-switch/etc-Legrand /Wipro /Anchor /havells /Panasonic) Ground Floor 602 40002987 Supply of 20 port Mobile Charging Station including all accessories and connections. Ground Floor 603 40007569 Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate. Ground Floor 604 40007573 Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room. Ground Floor 605 40007577 Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room. Ground Floor 606 40007703 Supply and fixing of Main Panel board -I/C. 100 A 4P on load change over switch-1 no, 100 Amp four pole MCCB with stud connector (36 KA) -1 No, Bus bar - 4Nos 250 Amp,500 V copper strip , drum insulator for bus bar - 8 Nos & Bus bar sleeving -1 Job , O/G-63 Amp 4P MCB with Stud connector -2 Nos ,40 Amp FPMCB stut connector-2 Nos,63 A DPMCB with Stut connector-2 nos,32 A DPMCB with Stut connector-4 Nos with sheet metal powder coating and door gasket ,door hinges,door locks ,wiring and socketing [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b)-Voltmeter,Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK] Ground Floor 607 40008024 Providing and fixing Carbon-di-oxide fire extinguishers. Capacity 4.5 kg. ISI Marked.(Make -Fire shield/Kanex/Safex ) Ground Floor 608 40008035 Sand Bucket as per IS specification . Ground Floor 609 40008037 Bucket stand to store 3nos of Bucket also having aluminium sheet above the atand to prevent the sand from rain/Sunset. Ground Floor 610 40008126 Supply and fixing of 250 mm sweep air ventilating fan with Louvers (PVC BODY) fan with connecting wire and all accessories including fixing and connections . [MAKE- USHA MODEL-CRISP AIR VX/CROMPTON MODEL-VENTILUS/HAVELLS/ANCHOR) Ground Floor 611 40008132 Supply & fixing of 600MM (24) WALL MOUNTED AIR CIRCULATOR FAN WITH COMPLETE ACCESSORIES[BROWN/WHITE].including hanging and connections as per instruction of Electrical Engineer-in-charge[MAKE- USHA MODEL-DOMINAIRE WALL/CROMPTON MODEL-ACVOTEX24 WM/HAVELLS/V-GURAD /ANCHOR-PANASONIC) Ground Floor 612 40008142 Supply and fixing of 6 way mcb Box ( 8+18)(BDB) with I/C- 32 AMP 4PMCB & O/G-25AMP DP RCCB (100MA)-3 NOS&10 AMP SP MCB -12NOS with sheet steel encloser ,distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection ,phosphate and power painted including earthing etc as required.Make-MCB-(Legrand/L &T/ABB/SCHNIDER) Ground Floor 613 40008150 Supply and fixing of 6 way mcb Box ( 8+18)(PDB) with I/C- 63 AMP 4PMCB + 63 AMP 4P RCCB (300MA) & O/G- 20 AMP SP MCB -09 NOS&16 AMP SP MCB -09NOS with sheet steel encloser ,distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection ,phosphate and power painted including earthing etc as required.[Make-(a) MCB/MCCB-Legrand/L&T/ABB/SCHNIDER Ground Floor 614 40008158 Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO) Ground Floor 615 40008385 Supply and fixing of on 15 watt round/square shape slim recessed mounted led panel with dia cast housing finished in white powder coating False ceiling with comprises of aluminium die cast housing finished in white powder coated & ABS white ring . The downlighter is pre-wired with high efficiency electronic driver. High traslucent frosted diffuser is used to get glare free, smooth light distribution. Operating Voltage Range : 150V~ - 270V, PF : > 0.9, 100 Lum/Watt with lamp , choke, connecting wire, and all accessories and connections .( Make- CROMPTON(MODEL NO-LSCRM-15W-CDL/LSCSM-15W-CDL)/ PHILIPS(MODEL NO-15W DURASLIM ROUND/SQUARE 165MM/WIPRO(MODEL NO-LD80-131-XXX-60-XX) Ground Floor 616 40008387 Supply and fixing of on 24 watt round/square shape slim recessed mounted led panel with dia cast housing finished in white powder coating False ceiling with comprises of aluminium die cast housing finished in white powder coated & ABS white ring . The downlighter is pre-wired with high efficiency electronic driver. High traslucent frosted diffuser is used to get glare free, smooth light distribution. Operating Voltage Range : 150V~ - 270V, PF : > 0.9, 100 Lum/Watt with lamp , choke, connecting wire, and all accessories and connections .( Make- CROMPTON/ PHILIPS(MODEL NO-22W DURASLIM ROUND/SQUARE 208 MM/WIPRO(MODEL NO-LD80-281-XXX-60-G1) Ground Floor 617 40008393 Supply and fixing of 9 WT. LED Bulb installred at angle holder/ batten holder.(Make- CROMPTON/ PHILIPS(MODEL NO-AceSaver 9W)/WIPRO(MODEL NO-N09001) Ground Floor 618 40008397 Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- CROMPTON(MODEL NO-CCS-102- 20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4/ WIPRO(MODEL NO-LL20-221-XXX-65NE3) Ground Floor 619 40008399 Supply & fixing of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire all accessories (Make- CROMPTON(MODEL NO-TRP-415-25-57-SL-LM-NBK)/ PHILIPS(MODEL NO-BRP029 LED25S 25W 2500LM)/ WIPRO) Ground Floor 620 40008405 Supply & fixing of 90 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 having LM 79 LM 80 tested including bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire with all accessories . (Make- CROMPTON(MODEL NO-TRP-412-90-57-SL-LM-NSG)/PHILIPS(MODEL NO-BRP033 LED90S 90W 9000LM)/WIPRO(MODEL NO-LR08-102-XXX-57-XX ) Ground Floor 621 40008495 Supply of 6U wall mounted rack including all accessories and connection(make-D-link(Model no-NWR-6U-5545-GR)/MOLEX/DIGISOL) Ground Floor 622 40008505 Supply & fixing of cat-6 UTP cable,4 pair,23AWG,FRPVC CM for LAN wiring with conduit pipe / PVC casing caping / under floor G.I. Tunk line. MAKE- D-LINK(MODEL NO-NCB-C6UGRYR)/DIGISOL/MOLEX) Ground Floor 623 40008507 Supply & fixing of patch cord,cat-6,utp,24awg,grey,lszg ,1mtr(Make-D-LINK(MODEL NO-NCB-C6UGRYR1-1-LS)/DIGISOL/MOLEX) Ground Floor 624 40008509 Supply & fixing of patch cord,cat-6,utp,24awg,grey,lszh ,2mtr(Make-D-LINK(MODEL NO-NCB-C6UGRYR1-3-LS)/DIGISOL/MOLEX) Ground Floor 625 40008511 Supply & fixing of information outlet with faceplate,single port ,modular straight shu and keystone,cat-6 utp,white,toolless type(MAKE-D-LINK/MOLEX/DIGISOL) Ground Floor 626 40008513 Supplying & fixing of patch panel ,24 PORT,CAT-6 UTP 180 Degree including all accessories and connections(Make-D-Link(Model N o-NPP-C61BLK241)/MOLEX/DIGISOL) Ground Floor 627 40008585 Supply and fixing of surface mounted led 18 w square/round light with powder coated finished in white housing 1with lamp , choke, connecting wire, and all accessories and connections .(Make- CROMPTON(MODEL NO-LCDSPLN-R-18-CDL/LCDSPLN-S-R-18-CDL)/WIPRO(MODEL N O-LD80-171-XXX-60-SM/PHILIPS(MODEL NO-20W Rd Metal FullGlow LED Surface ) Ground Floor 628 40008586 Supply and fixing of 24 Port Gigabit Smart Managed Switch with 4 Gigabit SFP Ports including all accessories and connection(Make-D-LINK(MODEL NO-DGS-1210-28)/DIGISOL (MODEL NO-DG-GS1528)/MOLEX) Ground Floor 629 40008703 Supply and fixing of 60wt Ceiling mounted high bay LED luminarie with LED lamp including all accessories and connection.(Make- Crompton model-TIP-311-70-57-SL-CP-NSG /wipro/philips) Ground Floor 630 40009312 Supply and installation of 1.5Tr.(5 Star) Inverter Split type Air Conditioner with supply and fixing of 4 KVA ,130-280 Volt voltage range wall/floor mounted stabiliser including all accessories,fastner angle copper piping up to 10ft & connections MAKE of A.C. – CARRIER MODEL NO-EMPERIA DXI/BLUE STAR MODEL NO-IA518ENU,MAKE OF STABILIZER- AUTOTEK/V-GUARD/MICROTEK Ground Floor 631 40009316 Supply and installation of 2.0Tr.(5 Star) Inverter Split type Air Conditioner with supply and fixing of 5 KVA ,130-280 Volt voltage range wall/floor mounted stabiliser including all accessories,fastner angle copper piping up to 10ft & connections MAKE of A.C. – CARRIER MODEL NO-EMPERIA DXI/BLUE STAR MODEL NO-IA/IC524DNU,MAKE OF STABILIZER- AUTOTEK/V-GUARD/MICROTEK Ground Floor 632 40010369 Supply & laying of 75mm Dia HDPE pipe PN - 6 PN - 80 required for cable laying. Make - Magunm, Supreme, Sudhakar. Ground Floor 633 MIS-INE-AREA ILLUM 634 40001024 Supply and laying of 6 sq.mm 2 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/ Polycab/KEI) Ground Floor 635 40001033 Supply and laying of 25 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/Polycab/KEI) Ground Floor 636 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 637 40001367 Supply and laying of 16 sq.mm 4 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required.(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 638 40002155 Supply and fixing of 16 sq.mm 04 core PVC Al. Arm Cableof 1.1 KV grade end termination.(Brass compression) Ground Floor 639 40002239 Supply and laying of 2.5Sqmm 3 Core Cupper Cable 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick (Make of wire Finolex/L &T/Anchor/Havels/V Guard) Ground Floor 640 40002349 Supply & errection of 8.0 Mtr galvanized Octagonal pole ,continuosly tapered,single piece,3mm thick,The face to face dimension is 130mm at bottom and 70mm at top dia.base plate.size is 200 x 200 x16 mm thick The pole should be manufactured from special steel plate suitable for lighting Arrangement System ,Galvanized Founation bolt specification of bolt length 600mm circle dia 200mm bolt size 20mm,Template size is 200mm PCD,thickness 3mm with 10/4 Bakelite Cover,63 Amp 4 way Stud Connector-01No,10 Amp SPMCB-01 No,MCB Channel-01 No,Mudguard Nut,Bolt & washer-06 Nos,Aluminium Socket-08 Nos.(make-Bajaj/havells/RR-ISPAT) Ground Floor 641 40002353 Supply and fixing of 1mtr. Long Galvanized deocartive single arm welded with top canopy at an angle of 120 degree with the pole.The outer dia of arms are 46mm,4 nutbolts suitable for 70mm Top. Ground Floor 642 40002355 Supply and fixing of 1mtr. Long Galvanized deocartive double arm welded with top canopy at an angle of 120 degree with the pole.The outer dia of arms are 46mm,4 nutbolts suitable for 70mm Top. Ground Floor 643 40002360 Supply and fixing of 40mm dia HDPE pipe -PE 80 grade PN-6. 2.0 wall thickness Ground Floor 644 40002497 Supply of outdoor type auxillary panel board made out from 20guage thick CR Sheet duly painted with clamping arrangement to be fixed on street light pole equipped with 04 nos bus bar 03 nos indication lamp with 1 No toggle switch ,1 no timer switch , 1 No Stud type 4 way terminal I/P) 63 Amp ) 1 No 63A TPN MCB, 1 No 3 Pole Contractor 65 A, 1 No Single Pole MCB 10A, 3 Nos 16 amp TPN MCB , 3 Nos Stud type , 4 way terminal (O/P) 63A A with earthing arrangement [Make-(a)MCB /MCCB - Legrand/ Schnider/L &T/ ABB, ( b)Volt meter, Ammeter-AE/CAPPA, (d) all other acessories ISI mark] Ground Floor 645 40003041 Supply, installation, testing and commissioning of GI coil earthing including excavation of earth pit in all kinds of soil/rock filling with charcoal & salt, connections to earthing stids/ bolt of the pole complete including all accesories and connections. Ground Floor 646 40005870 Supply and laying of 25 sq.mm 3.5 core End termination for Cableof 1.1 KV grade ISI Marked Ground Floor 647 40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor 648 40008383 Supplying & installation, testing and commissioning of post top lantern of 40 watt LED luminare with all accessories and including connection etc. ( Gate light )(Make-CROMPTON(MODEL NO-LPTO-40-CDL-M (40 WATT)/PHILIPS/WIPRO MODEL NO-LP07-501-XXX-57-CL) Ground Floor 649 40008405 Supply & fixing of 90 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 having LM 79 LM 80 tested including bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire with all accessories . (Make- CROMPTON(MODEL NO-TRP-412-90-57-SL-LM-NSG)/PHILIPS(MODEL NO-BRP033 LED90S 90W 9000LM)/WIPRO(MODEL NO-LR08-102-XXX-57-XX ) Ground Floor 650 40009686 Supply & Fixing of 2 core 6 sqmm Cable end termination Ground Floor 651 40010339 Supply, delivery, errection, testing & commissioning of 20 Meter , 20 sided polygonal hot dip galvanized high mast suitable for wind velocity of 250 KM/HR wind speed or more. The high mast must be supplied in two sections .The top dia and bottom dia of high mast should be 150 mm and 610 mm respectively . The thickness of top and bottom section should be 5 mm and 6 mm respectively . It shall include all accessories like head frame, Two points suspension system with steel wire rope of 6 mm dia, double drum winch ,galvanized lantern carriage with 8 nos. 300 wt LED flood light fitting having die cast aluminium controlgear box complete with ignitor & capacitor. The high mast to be supplied along with LED aviation obstruction light complete with all accessories, lightening final, integral power tool ,1.5 HP motor, EPR trailing cable installed inside the base compartment. 12 nos. 1200mm length foundation bolts for foundation. .outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP conta ctor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals. The scope of work also includes to construct RCC foundation , Erection of high mast, installation of feeder pillar, 2 nos. earthing with 2.5 mtr long 40 mm dia GI earth electrode. . The high mast to be supplied along with double drum winch . Wind tunnel report of high mast shaft should confirm the force coefficient and the mast must be suitable for 250 Km/HR wind speed or more. The entire high mast lighting system should be warrantied for a period of 2 years from the date of handing over . (Make- of Luminaries- Crompton Greaves/ Philips / Wipro )(Make of mast-RR ispat/Bajaj Ground Floor 652 MIS-INE-CCTV 653 40002360 Supply and fixing of 40mm dia HDPE pipe -PE 80 grade PN-6. 2.0 wall thickness Ground Floor 654 40003368 Supply,Installation,Testing and Commissioning of RJ 45/DC Connector as per theTechnical specification and direction of EIC. Ground Floor 655 40008495 Supply of 6U wall mounted rack including all accessories and connection(make-D-link(Model no-NWR-6U-5545-GR)/MOLEX/DIGISOL) Ground Floor 656 40008498 SUPPLY OF 9U WALL MOUNTED RACK INCLUDING ALL ACCESSORIES AND CONNECTION(MAKE-D-LINK(MODEL NO-NWR-9U-5545-GR)/MOLEX/DIGISOL) Ground Floor 657 40010307 Supply , Installation, testing , commissioning of 4MP IR Network Bullet Camera: (1/3 4MP PS CMOS Image Sensor,Max. 4MP (2560 × 1440) @25/30 30fps,IR Range of 30 Mtrs, Instastream, H.265 and Smart H.264+ dual-stream encoding,DWDR, Day/Night (ICR), 3D-DNR, IP67, PoE Support) Make - CP Plus/ Prama Ground Floor 658 40010309 Supply , Installation, testing , commissioning of 4MP IR Network Dome Camera: (1/3 4MP PS CMOS Image Sensor,Max. 4MP (2560 × 1440) @25/30 30fps,IR Range of 30 Mtrs, Instastream, H.265 and Smart H.264+ dual-stream encoding,DWDR, Day/Night (ICR), 3D-DNR, IP67, PoE Support) Make - CP Plus/ Prama Ground Floor 659 40010313 4MP WDR 32x IR Network PTZ Camera: 1/2.8 2MP CMOS Image sensor (0.9071 centimeters), Max. 50/60fps@4MP, Powerful 32x Optical zoom and 16x Digital zoom, WDR(120dB), 2D/3D-DNR, Day/Night (ICR), EIS, Electronic Defog, ROI, AGC,AWB, BLC, HLC, IR Range of 150 Mtr., Max 300° /s pan speed, 360° endless pan rotation, Support Face Detection, Make - CP Plus/ Prama Ground Floor 660 40010317 Supply , Installation, testing , commissioning of 24 Port Gigabit Ethernet PoE Smart Switch SFP port (192wt)2 . Make-Netgear/Junip er/Aruba Ground Floor 661 40010327 Supply , laying of Cat 6 Cable into PVC Pipe with casing Capping accessories CAT6 UTP Cable with LSZH Roll (305 Mtr) Make- D-link/Digisol Ground Floor 662 40010331 Supply , Installation of PVC IP55 Junction Box Ground Floor 663 40010401 Supply , Installation, testing , commissioning of 32Ch. 4K Network Video Recorder(Instastream/H.265/Smart H.264+/H.264/MJPEG codec decoding, Support 4 SATA HDDs up to 10TB Each,Support Multi-brand network cameras) Make - CP Plus/ Prama Ground Floor 664 40010403 Supply , Installation, testing , commissioning of 8 Port Giga Eth Unmanaged PoE Switch with 6KV surge protection , 150 Watt . Make- Netgear/Juniper/Aruba Ground Floor 665 40010405 Supply , Installation, testing , commissioning of 4-Port Gigabit Ethernet PoE Unmanaged Switch . Make-Netgear/Juniper/Aruba Ground Floor 666 40010407 Supply , Installation, Testing of 8 TB Surveillance HDD, Make- SEGATE/WD Ground Floor 667 40010408 Supply , Installation, Testing of HD Display LED 43 Inches or Higher Make - Samsung /LG Ground Floor 668 40010410 Supply , laying of Solid Cat 6 Outdoor Armed (ECCS Tape) Cable Make- D-link/Digisol Ground Floor 669 40010412 Supply , Installation, testing , commissioning of 1KVA Online UPS with Battery with 30 Mins Backup Make-Numeric/APC/Microtek Ground Floor 670 MIS-INE-DG SET 671 40001036 Supply and laying of 35 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 672 40010576 Design, supply, erection, testing and commissioning of 25 KVA silent type DG set(Only for light, fan , computer & 1 no Acquaguard point) with AMF, 440 V three phase 1500 RPM ,50HZ ,3 Cylinder with 4 nos earthing, 63 AMP 4 POLE CHANGE OVER ,ms pipe exhaust system, residual silencer, thermal logging and cladding of exhaust pipe complete , D.G. Plinth & Shed as per specification as required and as per direction of engineer-in-charge. Make- Mahindra Powerol Ltd/Cumins . Ground Floor 673 MIS-INE-Driver Res 674 40000946 Recessed wiring to Angle Holder Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havells/V guard/KEI) Make-switch /Angle holder-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 675 40000949 Recessed wiring to Tube Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 676 40000970 Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 677 40000973 Recessed wiring to Exhaust fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 678 40000976 Recessed wiring to Security Light Point ( MODULAR)(1X36WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 679 40000979 Recessed wiring to Security Light Point ( MODULAR) (4X24WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 15 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 680 40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 681 40000988 Point wiring for 15/16 amp socket outlet ( MODULAR) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 15/16 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 682 40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor 683 40001003 Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK) Ground Floor 684 40001012 Recessed wiring to submain in 4 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.10)(Make of PVC pipe-AKG/NORPACK) Ground Floor 685 40001042 Supply and laying of 70 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 686 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 687 40001129 Supplying and fixing of 6X4 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor 688 40001132 Supplying and fixing of 8X6 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-(National / Royalam) Ground Floor 689 40001135 Supplying and fixing of 8X10 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam) Ground Floor 690 40001141 Supplying and fixing of two modular GI Box 18 swg with Modular base & cover for 2 module (Sl. No- 1301,1421)(Make-switch/Socke t-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 691 40001145 Supplying and fixing of 4 modular GI Box 18 swg with Modular base & cover for 4 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 692 40001148 Supplying and fixing of 6 modular GI Box 18 swg with Modular base & cover for 6 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 693 40001151 Supplying and fixing of 8 modular GI Box 18 swg with Modular base & cover for 8 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 694 40001154 Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 695 40001172 Supply of U-type fan hook(Make-TATA) Ground Floor 696 40001193 Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells) Ground Floor 697 40001234 supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 698 40001876 Supply and fixing of 16 Amp top(for inverter installation) with all accessories and conncetion(Make-Legrand/wipro/Anchor-Panasonic) Ground Floor 699 40001879 Recessed wiring in 1X1.5sqmm (For inverter)/DG wiring )FR PVC insulated single core multistrand copper conducter of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick as per direction of Engineer in charge(Make of wire Finolex/Anchor/Havells/V guard)(Make of PVC pipe-AKG/NORPACK) Ground Floor 700 40002095 Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 701 40008126 Supply and fixing of 250 mm sweep air ventilating fan with Louvers (PVC BODY) fan with connecting wire and all accessories including fixing and connections . [MAKE- USHA MODEL-CRISP AIR VX/CROMPTON MODEL-VENTILUS/HAVELLS/ANCHOR) Ground Floor 702 40008142 Supply and fixing of 6 way mcb Box ( 8+18)(BDB) with I/C- 32 AMP 4PMCB & O/G-25AMP DP RCCB (100MA)-3 NOS&10 AMP SP MCB -12NOS with sheet steel encloser ,distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection ,phosphate and power painted including earthing etc as required.Make-MCB-(Legrand/L &T/ABB/SCHNIDER) Ground Floor 703 40008158 Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO) Ground Floor 704 40008393 Supply and fixing of 9 WT. LED Bulb installred at angle holder/ batten holder.(Make- CROMPTON/ PHILIPS(MODEL NO-AceSaver 9W)/WIPRO(MODEL NO-N09001) Ground Floor 705 40008397 Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- CROMPTON(MODEL NO-CCS-102- 20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4/ WIPRO(MODEL NO-LL20-221-XXX-65NE3) Ground Floor 706 40008399 Supply & fixing of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire all accessories (Make- CROMPTON(MODEL NO-TRP-415-25-57-SL-LM-NBK)/ PHILIPS(MODEL NO-BRP029 LED25S 25W 2500LM)/ WIPRO) Ground Floor 707 40008405 Supply & fixing of 90 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 having LM 79 LM 80 tested including bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire with all accessories . (Make- CROMPTON(MODEL NO-TRP-412-90-57-SL-LM-NSG)/PHILIPS(MODEL NO-BRP033 LED90S 90W 9000LM)/WIPRO(MODEL NO-LR08-102-XXX-57-XX ) Ground Floor 708 40010369 Supply & laying of 75mm Dia HDPE pipe PN - 6 PN - 80 required for cable laying. Make - Magunm, Supreme, Sudhakar. Ground Floor 709 40010399 Main Distribution Board -Incoming power Distribution panel/ board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes, gasket, powder coated, top & bottom terminals and properly painted with anticorrosive primer and paints, comprising the following: [Make-(a) MCB/MCCB- Legrand/L &T/ABB/SCHNIDER/ANCHOR-PANASONIC(b)-Voltmeter, Ammeter-AE/CAPPA (d) all other acessories ISI mark] Incoming- 1 No 200 Amp FP MCCB [35 kA] Busbar : 4 Nos 400A, 500V Electrolytic copper strips Outgoing - 2 nos 125Amp 4PMCCB with stud connector (36 KA) ,3 nos 63 A FPMCB with Stud connector,2 nos 40 A FPMCB with Stud connector,3 nos 63 A DPMCB with Stut connector Instrument - 03 Nos. Multi-function meters showing voltage, current, pf, frequency, MD and THD with required 500/5A CTs 03 Nos : LED type phase indicating lamps with control fuses,Door gaskets ,Door Hinges,Door locks,Wiring with socketing Ground Floor 710 MIS-INE-EV CHARGER 711 40001039 Supply and laying of 50 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 712 40001045 Supply and laying of 95 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 713 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 714 40001367 Supply and laying of 16 sq.mm 4 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required.(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 715 40002095 Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 716 40002152 Supply and fixing of 95 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade end termination Ground Floor 717 40002519 Supply & Fixing of 4 core 16 sqmm Cable end termination(Brass comression) Ground Floor 718 40002745 Supply and laying of 50 sq.mm 3.5 core End termination for Cableof 1.1 KV grade ISI Marked(Brass compression) Ground Floor 719 40003522 Supply and installation of HDPE pipe inspection chambers with die cast lid Ground Floor 720 40006311 Main Distribution Board-Incoming power Distribution Panel/board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes,gasket,powder coated,top & bottom terminals and properly painted with anticorrosive primer and paints,comprising the following [Make-(a)MCB/MCB Box-LEGRAND/ L&T/ ABB/ SCHNIDER (b) meter,Ammeter-AE/CAPPA(c)all other acessories ISI mark] Main incoming- 125 amp. TPNMCCB [25 ka] - 01 set 125 amp. 415 volt cut out - 03 nos. without meter space out going- 63 amp. TPNMCB [10 ka] - 03 nos 125 amp , 25 / 3 mm. copper bus bar - 04 nos indicating lamp and controlling switch - 03 set for 63 amp. tpnmcb instruments 0 – 100 amp. ammeter with selector switch - 01 set 100 / 5 amp. ct - 01 set 0 – 500 volt. voltmeter with selector switch - 01 set indicating lamp with controlling switch - 01 set size – 900 x 900 x 200 mm Ground Floor 721 40006385 Main Distribution Board -Incoming power Distribution panel/ board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes, gasket, powder coated, top & bottom terminals and properly painted with anticorrosive primer and paints, comprising the following: [Make-(a) MCB/MCCB- Legrand/L &T/ABB/SCHNIDER/ANCHOR-PANASONIC(b)-Voltmeter, Ammeter-AE/CAPPA (d) all other acessories ISI mark] Incoming- 1 No 200 Amp FP MCCB [35 kA] Busbar : 4 Nos 400A, 500V Electrolytic copper strips Outgoing - 3 nos 125Amp 4PMCCB Busbar : 4 Nos 200A, 500V Electrolytic copper strips 125 Amp FP Change Over ,Bus bar-200A Cupper Busbar ,Instrument-Multifunction meter,Indicator-1 set 3 Nos 63Amp 4PMCCB Instrument - 03 Nos. Multi-function meters showing voltage, current, pf, frequency, MD and THD with required 500/5A CTs 03 Nos : LED type phase indicating lamps with control fuses Ground Floor 722 40007703 Supply and fixing of Main Panel board -I/C. 100 A 4P on load change over switch-1 no, 100 Amp four pole MCCB with stud connector (36 KA) -1 No, Bus bar - 4Nos 250 Amp,500 V copper strip , drum insulator for bus bar - 8 Nos & Bus bar sleeving -1 Job , O/G-63 Amp 4P MCB with Stud connector -2 Nos ,40 Amp FPMCB stut connector-2 Nos,63 A DPMCB with Stut connector-2 nos,32 A DPMCB with Stut connector-4 Nos with sheet metal powder coating and door gasket ,door hinges,door locks ,wiring and socketing [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b)-Voltmeter,Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK] Ground Floor 723 40010369 Supply & laying of 75mm Dia HDPE pipe PN - 6 PN - 80 required for cable laying. Make - Magunm, Supreme, Sudhakar. Ground Floor 724 40010415 Design,Supply ,erection,testing and commissioning of 10 KW- 3 x 3.3 KW AC E-Rickshaw charger having following specification Input Voltage 415 VAC, 3 ph 5wire(L1, L2, L3, N & PE) Input Frequency 50 Hz Number of Outputs- 3 Output 1 Rating- Each outlet 230VAC, Max 15A (MAKE- Anchor Panasonic/Siemens) Ground Floor 725 MIS-INE-FAST AID K 726 40007577 Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room. Ground Floor 727 MIS-INE-FIRE FIGHT 728 40008024 Providing and fixing Carbon-di-oxide fire extinguishers. Capacity 4.5 kg. ISI Marked.(Make -Fire shield/Kanex/Safex ) Ground Floor 729 40008026 Providing and fixing stored pressure portable (powder type) ABC - 6.0 kg fire extinguishers including all accessories as per latest IS with wall bracket and rawl plug(Make -Fire shield/Kanex/Safex .) Ground Floor 730 40008033 Providing and fixing of 4kg clean agent type fire extinguishers including all accessories as per latest IS with wall bracket and rawl plug (Make -Fire shield/Kanex/Safex .) Ground Floor 731 40008073 Supply and fixing of wall mounting type Auto glow signages of different type like, fire exit with one side arrow /do not use lift in case of fire/Emergency Exit/Staircase Indicating Arrow etc . Sizes :-300x150mm . type .(Make-Prolite autoglow) Ground Floor 732 40008075 Supply and fixing of Location & Map Auto glow Signages . Sizes900x1200mm . Ground Floor 733 MIS-INE-LIGHTING P 734 40002086 Air-Terminal Supply, Installation, Testing & Commissioning of Early Streamer Emission (ESE-30))type Lightning Air Terminal. Supporting Mast The mounting pole used to support the lightning air terminal shall be minimum length of 05 Mtr. , non corrosive and made up of medium class GI / SS pipe of 1.5″ diameter having base plate at bottom for securely fixing the mast on roof top. The mounting pole and supports shall be securely fixed with the brackets and PVC insulated metallic guy wires to withstand the maximum wind velocity of that area. Protection Radius :- 48 Mtr Make :- ABB / STROMKING All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 735 40002089 Lightning Strike Counter Supply, Installation, Testing & Commissioning of non-electronic & non-resettable (Not require any external power supply) type lightning strike counter to count the lightning stroke having display with IP-67 enclosure including all accessories and connection..(6/7 digit) Make :- ABB / STROMKING All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Engineer-in-Charge. Ground Floor 736 40002095 Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 737 40002098 Supply, connection &Testing of sub earthing with 16 Sq.mm single core multi stranded copper flexible wire from surge protection device (SPD) panel to earth electrode & Main panel board to SPD panel including all accessories, cable socketing and connections. Make :- FINOLEX / ANCHOR / HAVELLS All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge Ground Floor 738 40002101 Supply, Installation, Testing & Commissioning of indoor type wall mounted Surge protection device (SPD) panel made of 2 mm thick CRCA sheet, dust and vermin proof duly powder coated having the following arrangement & complete factory wired by 16 Sq.mm single core multi stranded copper flexible wire. [A] Type 1+2 AC Surge Protection Device (SPD) (TP+N) (50 KA) - 01 Set [B] 63 Amp. HRC fuse with link – 03 Nos [C] 100 Amp. 4 pole stud connector – 01 No Make of SPD & HRC Fuse :- HAVELLS / L&T / LEGRAND Make of Wire :- FINOLEX / ANCHOR / HAVELLS All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 739 40002720 Supply and laying of 70sqmm single core FR PVC insulated unseathed copper conductor for voltage grade 1100 volt as per IS-694 in sur face/underground as required(sl no-5.5.2)(Make-KEI/FINOLEX/HAVELLS) Ground Floor 740 MIS-INE-ONGRID SOL 741 40003442 Supply,Installation,Testing & Commissioing of Net Meter in Consultation with Distribution utility. Ground Floor 742 40011901 Design,Supply,Installation,Testing & Commissioing of Grid Connected Roof top solar PV System(Through net metering)(Make-Solar PV Panel(VIKRAM/WARREE/TATA POWER SOLAR SYSTEM/PANASONIC SOLAR) ,Solar-P.C.U-LUMINOUS/STATCON/MICROTEK/SU-KAM POWER SYSTEM,Solar Battery-EXIDE/OKAYA/LUMNOUS,DC and AC distribution-MCB-Legrand/L &T,HRC fuse-L&T/ABB,Copper cable-Finolex/Havells/Polycab) Ground Floor 743 MIS-INE-PA SYSTEM 744 40001708 Wiring to Loudspeaker with 2x1.5 sqmm stranded copper conductor unarmoured cable for loud speakers clamped with PVC pipe saddles,base etc.on ceiling/wall complete including termination,testing etc as required (Make-Finolex/Anchor/Havells/V-guard) Ground Floor 745 40001709 Installation,testing,commissioning charges of audio system. Ground Floor 746 40004559 Supplying and fixing of 25 mm dia conduit of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.( Sudhakar / AKG / BEC/ANCHOR) Ground Floor 747 40008481 Supply of wall mounted speaker make- Ahuja (ASX-312bt) including all accessories. Ground Floor 748 40008483 Supply of wireless speaker Microphone Make-Ahuja(AWM 700UH)including all accessories Ground Floor 749 40008487 Supply of Audio amplifier Make-Ahuja(SSA-250DP) including all accessories Ground Floor 750 40010436 Supply of 30 Watts Outdoor Horn Speaker ( Make- Ahuja/ Sonodyne) Ground Floor 751 40010439 Supply of ahuja Two Way Counter Communication System (Make-ahuja (CCS-2300 ) Ground Floor 752 MIS-INE-SECURITY R 753 40000946 Recessed wiring to Angle Holder Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havells/V guard/KEI) Make-switch /Angle holder-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 754 40000976 Recessed wiring to Security Light Point ( MODULAR)(1X36WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 755 40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 756 40000985 Point wiring for 5/ 6 amp socket outlet ( Separate) ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 757 40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor 758 40001024 Supply and laying of 6 sq.mm 2 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/ Polycab/KEI) Ground Floor 759 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 760 40001129 Supplying and fixing of 6X4 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor 761 40001151 Supplying and fixing of 8 modular GI Box 18 swg with Modular base & cover for 8 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 762 40001237 Supply and fixing of 4 way , single Door MCB Box with 1 No 32 Amp. DP MCB & 2 Nos of 20 Amp. SPMCB with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.,2.7, )Make-MCB-(Legrand/L &T/ABB/SCHNIDER/ANCHOR-PANASONIC) Ground Floor 763 40008124 Supply & fixing of 400mm (16) wall mounted fan with complete accessories[brown/white].including hanging and connections [MAKE- USHA MODEL-MIST AIR DUOS/ CROMPTON MODEL-TROPEDO HI SPEED//HAVELLS/V-GURAD MODEL-PETAL WF 17/ANCHOR) Ground Floor 764 40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor 765 40008393 Supply and fixing of 9 WT. LED Bulb installred at angle holder/ batten holder.(Make- CROMPTON/ PHILIPS(MODEL NO-AceSaver 9W)/WIPRO(MODEL NO-N09001) Ground Floor 766 40008399 Supply & fixing of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire all accessories (Make- CROMPTON(MODEL NO-TRP-415-25-57-SL-LM-NBK)/ PHILIPS(MODEL NO-BRP029 LED25S 25W 2500LM)/ WIPRO) Ground Floor 767 MIS-INE-SHOP 768 40000946 Recessed wiring to Angle Holder Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havells/V guard/KEI) Make-switch /Angle holder-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 769 40000949 Recessed wiring to Tube Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 770 40000970 Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 771 40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 772 40000988 Point wiring for 15/16 amp socket outlet ( MODULAR) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 15/16 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 773 40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor 774 40001003 Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK) Ground Floor 775 40001024 Supply and laying of 6 sq.mm 2 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/ Polycab/KEI) Ground Floor 776 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 777 40001129 Supplying and fixing of 6X4 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor 778 40001135 Supplying and fixing of 8X10 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam) Ground Floor 779 40001154 Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 780 40001172 Supply of U-type fan hook(Make-TATA) Ground Floor 781 40001187 Supply and fixing of 8 way , Double Door MCB Box with 1 No 32 Amp. DP MCB & 6 Nos of 20 Amp. SPMCB with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.6,2.7, )Make-MCB-(Legrand/L&T/ABB/SCHNIDER) Ground Floor 782 40001193 Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells) Ground Floor 783 40001234 supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 784 40002179 Recessed wiring to Surface Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection .( Make of wire Finolex / L &T / Anchor / Havells/ V guard)Make-switch /-Legrand /Wipro /Anchor /havells /Panasonic) Ground Floor 785 40008158 Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO) Ground Floor 786 40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor 787 40008393 Supply and fixing of 9 WT. LED Bulb installred at angle holder/ batten holder.(Make- CROMPTON/ PHILIPS(MODEL NO-AceSaver 9W)/WIPRO(MODEL NO-N09001) Ground Floor 788 40008397 Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- CROMPTON(MODEL NO-CCS-102- 20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4/ WIPRO(MODEL NO-LL20-221-XXX-65NE3) Ground Floor 789 40008585 Supply and fixing of surface mounted led 18 w square/round light with powder coated finished in white housing 1with lamp , choke, connecting wire, and all accessories and connections .(Make- CROMPTON(MODEL NO-LCDSPLN-R-18-CDL/LCDSPLN-S-R-18-CDL)/WIPRO(MODEL N O-LD80-171-XXX-60-SM/PHILIPS(MODEL NO-20W Rd Metal FullGlow LED Surface ) Ground Floor 790 MIS-INE-VIDEO WALL 791 40010417 LED Display Board 126 LX63 H/10LX63H/80LX63HP outdoor 6 pixel density 160000 dots/sqm module resolution128x64 dots frame frequency 60Hz single LED unit pixel ,brightness 800-1000cd/sqm,gray scale up to 16bit /2.81 billion,optimum viewing angle 140x120,input voltage 220V AC ,operating tempreature 200C to 500C,Cabinet size 960mmx960mm die cast,english/odia/any language for text,video,image,outdoor active LED video fixed on unipole structure with ACB box with supply and installation.Thickness of the screen>120mm wall(BIS certified module)LED:NATION STAR SMP. Ground Floor 792 40010419 Novastar TB 40 processor with 4G module(BIS certified module),Novastar IND 528 receiving card,cloud based software inbuilt,LAN/Cloud data entry system having multiscreen playback synchronization mechanism (Make-Novastar TB 40) Ground Floor 793 40010423 Fixing of frame unipole structure 106x63 with ACP box for supporting LED sign board 40x40x3 mmsq SS 304 grade pipe and top plate for pole 580x500x12 mm with base plate 450x450x20mm and single pole size 275mm diax5x3000mm working platfrom made by 25x25x3 mm SS-304 grade square pipe panel size 768x768mm of ACP work(Make-Ahuja 100 watt speaker SS-304 JINDAL/NIPPON STEEL of premium quality. Ground Floor 794 40010428 LED Display Board 12.2 length X 4.2height.,10.6 length X 4.2height. Indoor P 2.5 pixel, density 160000 dots/sqm, module resolution 128x64 dots, module dimension 320 x160x15 mm frame frequency 60hz, single LED unit pixel, brightness 800-1000cd/sqm, gray scale up to 16bit/2.81 billion, optimum viewing angle 140x120, input voltage 220V AC, operating temperature 20°C to 50°C, cabinate size 320mmX160mm magnetic module, english/odiya/ any language for text, video, image, Indoor Active LED Video fixed on wall mounting with steel structure supply and installation Thickness of the screen>60mm Wall. (BIS certified module) LED: NATION STAR SMP. Ground Floor 795 MIS-INE-WORK SHOP 796 40000949 Recessed wiring to Tube Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 797 40000970 Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 798 40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 799 40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor 800 40001003 Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK) Ground Floor 801 40001012 Recessed wiring to submain in 4 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.10)(Make of PVC pipe-AKG/NORPACK) Ground Floor 802 40001033 Supply and laying of 25 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/Polycab/KEI) Ground Floor 803 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 804 40001129 Supplying and fixing of 6X4 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor 805 40001132 Supplying and fixing of 8X6 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-(National / Royalam) Ground Floor 806 40001135 Supplying and fixing of 8X10 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam) Ground Floor 807 40001145 Supplying and fixing of 4 modular GI Box 18 swg with Modular base & cover for 4 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 808 40001148 Supplying and fixing of 6 modular GI Box 18 swg with Modular base & cover for 6 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 809 40001151 Supplying and fixing of 8 modular GI Box 18 swg with Modular base & cover for 8 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 810 40001154 Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 811 40001166 Supply and fixing of 63 AMP 4P MCB-1NO,63 AMP,415 V CUTOUT-3 NOS WITH COPPER BUS BAR & INDICATOR ETC including all accessories and connections . [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b)- Voltmeter, Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK] Ground Floor 812 40001172 Supply of U-type fan hook(Make-TATA) Ground Floor 813 40001193 Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells) Ground Floor 814 40001228 Supply & fixing of 45 W LED STREET LIGHT FITTING on wall with , G.I. Bracket, Clamp & Nut Bolt connecting wire all accessories refer to catalouge No- MAKE- CROMPTON, CODE-LSTO-45-CDL /MAKE-PHILIPS, MODEL-GREEN LINE , CODE-BRP320 / MAKE-HPL, CODE-HPLLEDST4060S & HPLLEDSL4560S including fixing and connections as per instruction of Electrical Engineer-in-charge. Ground Floor 815 40001234 supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 816 40001653 Recessed wiring to Security Light Point (1X36WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in charge . ( Make of wire Finolex / L &T / Anchor / Havels/ V guard/HPL) Ground Floor 817 40002173 Point wiring for Instrument Point(modular) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 2 nos of 15/16 Amp, 250 V modular type switch & socket ,& 2 nos 5 amp modular type switch & socket phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc as required as per direction of Engineer in charge . ( Make of wire Finolex / L &T / Anchor / Havels/ V guard/HPL) Ground Floor 818 40002868 Supply and fixing of 4 way , single Door MCB Box with 1 No 63 Amp. 4P Isolator with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.,2.7, ) Ground Floor 819 40008158 Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO) Ground Floor 820 40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor 821 40008397 Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- CROMPTON(MODEL NO-CCS-102- 20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4/ WIPRO(MODEL NO-LL20-221-XXX-65NE3) Ground Floor 822 MIS-IPH-Drivers R 823 10000314 Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3- 2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification.Porcelin 23 inch LWC(ORISSA Pan) Ground Floor 824 10001056 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 mtr. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 20 mm outer dia CPVC pipes. Ground Floor 825 10001058 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 25 mm outer dia CPVC pipes. Ground Floor 826 10001060 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 40 mm outer dia CPVC pipes. Ground Floor 827 10001064 Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method; water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid for separately). 110mm dia. SWR pipe of Single Socket Push fit of class-3 (6Kg/Sq.cm). Make:- ORIPLAST/SUPREME/FINOLEX. 110mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm). Ground Floor 828 10001066 Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method with water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid separately). 160mm dia. rigid UPVC SWR pipe Class- 3 (6Kg/Sq.cm). Make: ORIPLAST/SUPREME/FINOLEX. 160mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm). Ground Floor 829 10001068 Providing and fixing on wall face PVC 110 mm dia. offset SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. offset PVC SWR type. Ground Floor 830 10001070 Providing and fixing on wall face 110mm dia. single junction with door PVC SWR type moulded fittings, accessories for Rigid UPVC SWR pipes conforming to IS : 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion . Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Single Junction with door PVC SWR type. Ground Floor 831 10001072 Providing and fixing on wall face 110mm dia. plain bend PVC SWR type moulded fittings / accessories for Rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Plain Bend PVC SWR type. Ground Floor 832 10001074 Providing and fixing on wall face 110mm dia. bend with door PVC SWR type moulded fittings / accessories for rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Bend with door PVC SWR type. Ground Floor 833 10001076 Providing and fixing on wall face 110 mm dia. cowel PVC SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. cowel PVC SWR type. Ground Floor 834 10001088 Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc. all complete as per specification with 1:4 brick work in cement mortar (1:4) and 12mm thick cement plaster. For 250mm thick wall. Ground Floor 835 10001094 Cutting holes in R.C.C floor and roofs up to 19cm thick for passing G.I/PVC pipes and fittings etc. and repairing the hole after insertion of pipes etc. with cement concrete (1:2:4) including finishing complete so as to make it leak proof. Details cost of 1 hole of average size 15cm X 15cm X 25cm. Ground Floor 836 10001098 Fixing floor traps of the following nominal diameter of outlet of self cleaning design with serewed down or hinged grating with or without vent arm complete includingcost of cutting and making good the walls and floors all complete as per specification. 110mm INLET & OUTLET FLOOR TRAP.make: ORIPLAST/SUPREME/FINOLEX 110mm Dia Inlet & Outlet floor trap PVC SWR type. Ground Floor 837 10001100 Providing and fixing EWC Commode floor mount(S/P trap) conforming to IS 2556: Part 3- 2004 duly fixed to head less socket caps/wall plugs and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification without cistern - Long pattern size 575x345x390mm. Make: Hindware POPULAR (CAT NO-20044 S-TRAP-28.5/P-TRAP-18.0)/Parryware ELITE (P-TRAP-CO278/S-TRAP-CO297) White Vitreous China Wash Down Water Closet (EWC). Ground Floor 838 10001116 Providing and Fixing PVC LOW LEVEL CYSTERN conforming to IS 2556 : Part 3- 2004 SIZE 415X130X305mm.Make: Hindware SUPERB (CAT NO-50 8829)/Parryware SLIMLINE ECONOMY (E-8090).White Vitreous china 10 litre (full flush) capacity manually controlled low level flushing cistern with all fittings and fixtures. Ground Floor 839 10001122 Providing and fixing of Standing urinal including connecting the urinal with 32mm dia. PVC waste pipe by means of white lead mixed with chopped hemp,15mm dia. PVC Reinforced heavy duty connection pipe etc. all complete as per specification. (White vitreous china clay half stall urinal flat back size-355X345X535 mm. Make: JAQUAR(URS-WHT-13261). Standing Urinal 355x345x535mm. Ground Floor 840 10001124 Providing and fixing of 25mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 25 mm dia. CPVC Full Way Valve / Ball Valve. Ground Floor 841 10001126 Providing and fixing of 40mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 40 mm dia. CPVC Full Way Valve / Ball Valve. Ground Floor 842 10001130 Providing and fixing of 15mm dia. CP Screw-down short body Bib Cocks (Taps) polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux Headand high quality). Make: JAQUAR(CON-047KN-)/ KOHLER (K-27490IN-CP). 15mm diameter Short body bib cock. Ground Floor 843 10001132 Providing and fixing of 15mm dia. CP Screw-down two way Bib Cocks (Taps)polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux headand high quality). Make: JAQUAR( CON-041KN)/ KOHLER (K-25432IN-4-CP). 15mm dia. Two-way Short body bib cock. Ground Floor 844 10001134 Providing and fixing of 15mm CP dia. Screw-down long body Bib Cocks (Taps) polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux Headand high quality). Make: JAQUAR( CON-107KN)/ KOHLER (K-27490IN-CP) 15mm dia. Long body bib cock. Ground Floor 845 10001136 Providing and fixing of 15mm dia. CP Screw-down angle Stop Cocks with flange of the following nominal sizes as per specification complete. (Deluxe Head and high quality). Make: JAQUAR (CON-059KN))/ KOHLER (K-11568IN-7B-CP). 15mm diameter Angle Stop Cock. Ground Floor 846 10001138 Providing and fixing of Screw-down 15 mm CP concealed Stop Cock with fitting sleeve, operating lever and adjustable wall flange and concealed body conforming to of the following nominal sizes as per specification complete. (Deluxe Headand high quality). Make: JAQUAR-(CON-083FTK+ALD-083FT). 15mm diameter Concealed Stop Cock. Ground Floor 847 10001140 Providing and fixing of 15mm dia. CP overhead shower rose 100mm round with rubit cleaning system including polishing all complete as per specification.(Deluxe Head and Heavy quality). Make: JAQUAR (OHS-1989)/ KOHLER (K-163561N-A-CP). 100 mm diameter / 15 – 20 mm width shower rose. Ground Floor 848 10001142 Providing and fixing of 15mm dia. CP shower arm 160mm long light body round shape for wall mounted with flange. including polishing all complete as per specification. (Deluxe Head and Heavy quality). Make: JAQUAR (SHA -477)/ KOHLER (K-99054IN-CP). 15 mm x 160 mm long size CP shower arm. Ground Floor 849 10001146 Providing and fixing of health faucet with 1.2m long PVC tube and wall hook. Make: JAQUAR (ALD-563) including all complete as per specification. 1.2m long PVC tube CP health Faucet. Ground Floor 850 10001148 Providing and fixing Stainless Steel soap dish holder fixed to head less socket caps, wall plugs with CP brass screws as per specification. Make: JAQUAR (ACN-1131N))/KOHLER (K-10712D-CP). Stainless Steel Soap Dish Holder. Ground Floor 851 10001150 Providing and fixing of 600x120 mm glass Shelf with anodised aluminium angle frame with chromium plated brassbrackets and guard rails of required size complete, fixed to head less socket caps, wall plugs with chromium plated brass screws as per specification. Size 600x120 mm glass shelf. Make: AQUAR-(ACN-1171N)/ KOHLER(K5636IN-CP). 600mmX120mm Glass Self. Ground Floor 852 10001152 Providing and fixing standard sized stainless steel towel rail of 600mm long complete with Chromium Plated brass brackets; fixed to head less socket caps, wall plugs with Chromium Plated brass screws, complete as per specification. (Make: JAQUAR (ACN-1111SM)/ KOHLER (K-5630IN-CP),(Heavy quality). 25 x 600 mm long SS Towel Rail. Ground Floor 853 10001154 Providing and fixing standard sized stainless steel towel ring with round flange complete with Chromium Plated brass brackets; fixed to head less socket caps/wall plugs with Chromium Plated brass screws, complete as per specification. Make: JAQUAR (ACN-1121BN) /KOHLER (K-5631IN-CP). SS Towel ring with round flange. Ground Floor 854 10001158 Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to head less socket caps, wall plugs and washers complete as per specification.(AR-2013,SL. NO.-3.4.26). Make: Mirror Glass (SAINT GOBIN/AIS(ASAHI)). 600mm x450mm Bevelled Edge Mirror (Heavy quality). Ground Floor 855 10001160 Providing and fixing Rotational moulded polyethylene cylindrical vertical water storage tank 3layer wall conforming to IS : 12701--1996 including cutting holes through the tank and fixing, fittings CPVC tubes and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting up to a height of 5 metres above ground level and placing the tank to the required position etc. all complete as per specification. Make: SINTEX/SUPREME/ORIPLAST. Triple Layer Cylindrical Vertical water storage tanks. Ground Floor 856 10001166 Fixing wash basins WITHOUT PEDESTALwith hole for pillar taps with 10mm dia M S rack bolt (JAQUAR MAKE) painted white including cutting holes in walls and making good the damages etc all complete, with fixing of 15mm dia pillar cock, as per specification.(Vitreous china flat back wash basin 550x400x200 mm)(CODE CNS-WHT-801 JAQUAR MAKE).Pillar cock(CON-021 JAQUAR)32mm full/half thread CP waste(ALD-705/709-JAQUAR), Rack bolt(ZPS-MST-RB03)Vitreous china flat back wash basin 550x400x200mm . Ground Floor 857 10001209 Providing and fixing curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish size H:900XW:450mm with stainless Steel brackets including cutting holes in wall and making good the damages etc. complete as per specification. Make: JAQUAR (JSE-CHR-110UC450X/110US450X). Curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish. Ground Floor 858 SIG 859 50014253 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering<(>,<)>fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel-JINDAL/NIPPON of premium quality, Signage-3M (90CM EQUILATERAL TRIANGLE)# Ground Floor 860 50014255 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (80cmX60cm Rectangular) Ground Floor 861 50014257 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (60cm circular) Ground Floor 862 50014259 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (90cm circular size) Ground Floor 863 50014261 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (60CmX45Cm Rectangular) Ground Floor 864 50014263 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (90 cm high octagon) Ground Floor 865 50014265 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (60X60 cm square) Ground Floor 866 50014267 Manufacturing, supplying and fixing informative retro reflective sign boards/ prismatic retro reflective information sign board made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c and screws and anchor bolts including making holes in plates, providing & fixing ACP message plate of required size. The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect to fix on the wall. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M Ground Floor 867 50014269 Manufacturing, supplying and fixing retro reflective sign boards (single side) 8’x6’ made up of 3mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 40mmx40mm along with theft resistant measures, mounted and fixed with 4 Nos. S.S. square tube of 40mmx40mm to a vertical post made up to S.S. tube of schedule 40 of 50mm dia welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 50mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. FOR 2 VERTICAL POSTS. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M Ground Floor 868 a) APPROVED MAKE /BRAND FOR CEMENT : ULTRATECH, NUVOCO, ACC, JSW (PSC),RAMCO(PSC),DALMIA(PSC),SAGAR(PSC) 869 APPROVED MAKE / BRANDS ARE TO BE UTILISED STRICTLY DURING EXECUTION OF ABOVE RELATED ITEMS OF WORK 870 Provision For 5 Year Repair & Maintenance (as stated in DTCN cl no.111) 1.75% 871 CESS
Contract Date: Jan 28, 2026 Contract Value : 6.54 Crore
Government Departments No of Bidders 9
13.
Housing Urban and Rular Development #8569293 AOC
Tender For Special Repairs To Girls Hostel Building In Government Medical College And Esi Hospital At Coimbatore District.; 1 Dismantling, clearing away and carefully stacking materials useful for re-usefor Pressed tiles & weathering course directed by the Departmental officers Complying with standard specification. 2 Dismantling, clearing away and carefully Clean removal of cement plaster from walls. 3 Dismantling, clearing away and carefully stacking materials useful for re-usefor any thickness of Plain cement Concrete as directed by the Departmental officers Complying with standard specification. 4 Dismantling, clearing away and carefully stacking materials useful for re-usefor any thickness of Damaged floor finishing wall in Cement Mortar with Mosiac/Glazed Tiles/Clay Tiles/Cuddapah Slabs as directed by the Departmental officers Complying with standard specification. 5 Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. 6 For Superstructure in Third Floor 7 Finishing the top of roof with one course of Machine Pressed tiles ofsize 230mmx230mmx20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stoneSand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers 8 Clearing the roof slab top surface by high pressure water jet machine for removing dirt, fungus, loose and fake materials. If any tile joint area mortar damage or cracks filling with modified mortar ( along with polymer pressure of 150kpa). Then further applying primer coat with primer seal over with top coat classic in further applied, with all necessary accessories and including cost of materials and labour charges for laying in position etc., complete complying with standard specification. 9 Clearing the existing of toilet flooring including cost of materials and labour charges complete complying with standard specification as directed by the departmental officers 10 The area of repair should be properly assesed before taking up the following stages of repair. The Con, Scaffolding will be erected with proper bracing to the designated height by checking the vertically and using proper MS Pipes also providing platform at various levels to enable the repair. The concrete surface will be examined for loose and spalled portions and the same will be removed with the help of chisel & hammer. Perfecr preparation of substrate is essential for optimum performance of repair. The surface and the reinforcement should be water washed by removing all laitance and other contaminants hampering the adhesion of the repair concrete mortar. Prepare the final surface free from dust and debris and to a rough profile with at-least 5mm level difference between surface troughs and peaks. Retro fitting the RCC roof slab/beams by removal of rust, Application of Anti-corrosive coating to reinforcement rods, welding additional 8mm/10mm dia reinforcement bars ofFe500 rods in places of extreme corrosion. Replacement of the affected part of rebars will be necessary if the diameter is found reduced by more than 20% of the original diameter. 11 Apply Two component anti-corrosion for steel reinforcement using before concrete repair. The clean substrate must be alkaline (pH above 9.5) and free of other contaminants. The primed area shall be filled with single component, Dual shrinkage compensated micro-concrete of FosrocRenderoc RG mixed with small aggregates Ratio of 1:0.5, if travel applied area FosrocRenderoc SP 40 depth 50 to 75mm average thick. After fixing the formwork as per requirement. The formwork shall be made of either plywood or steel. In both the cases, before pouring of micro concrete all probable leakage points shall be sealed using suitable sealing compound. The mixed micro concrete shall be poured into the formwork. The mixed material shall be placed into the formwork within 20 minutes from the time of application. The concrete filling shall be continued till area is completely filled and closed. The mixed mortar is trowel applied and the first layer by gloved hand including packing behind rebars and then firmly trowel on the rest to required thickness. The compressive strength achieved in 24 hours after proper curing will be 15 MPa in 24 hours and 35 MPa in 7 days. Overlays such as plaster add with Tamseal SBR etc. Complete 12 Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of U clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as directed by the departmental officers 13 FOUR FLOOR 14 THREE FLOOR 15 Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken jelly for flooring including laying,consolidating, finishing,renderingthetopsurfaceroughtoreceivethefloor,curing,etc.complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers) -Mixing by manual means 16 Providing Granolithic Floor finish of the following thickness with plain cement concrete1:2:4(OneCement,Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)-Machine Mix 17 40mm Thick 18 Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. 19 Plastering with Cement Mortar 1:3 (One Cement and Three PlasteringSand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including mortar plasticizer at 200ml per 50Kg of cement used, finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. 20 Supplying Fabricating and fixing of M S GRILL for open court yard grill, grill work to doors, windows and ventilators with required size and angles including with necessary M.S. Channels, L angles, M.S. Plate as per the approved special designed including cost of materials and labour charges for cutting angle, welding charges including cost of welding rod conveyance charges at site of work including cost of one coat of red oxide primer etc., complete and as directed by the departmental officers. 21 Flooring with Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mm size conforming to IS 15622laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Groutat the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) 22 Paving the floor with best quality Double charged Vertified tiles 600 x 600 x 8mm conformingIS 15622 with water absorbtion less than 0.08%of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) 23 Paving the floor with best approved qualitys Fine Polished Granite Slab of size 1200 x 600 of 18 / 20mm thick of JET BLACK and Variety with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stonesand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work) 24 Dadooing with printed design colour glazed tiles of size 300 x 450 x 8mmconforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thickwith Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Groutat the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) 25 supplying and fixing of Hollow pressed steel door frames for single leaf and double leaved door using pressed steel frame of size 105x60mm using mild sheet of 1.25mm thick (18gauge) special profile extruded section.The pressed steel frame shouldbe as per IS4351/1976.The rate in inclusive of hold fasts and provision to aldrip tower bolt hinges and lock plate etc,with one coat of zinc chnomate yellow primer and filling the inside hallow portion with cement concrete 1:2:4 using 20mm HBG stone jelly etc,complete complying with standard specificationand as directed by the departmental officers. 26 Supplying and fixing Medium Density Fibre board (SBG I) of exterior grade of following type with thickness conforming to IS 12406 / 2003 with necessary adhesive and C.P. screws, including fixing of aldrops, tower bolts, hinges and lock strike plates, putty, fevical, varnish for T.W. lipping with thinner colouring agent etc., The rate includes cost of materials and cost forfurniture fittings such as 3 nos SS 304 Grade Butt Hinges of size (125mm x 30mm),1 no Alu. aldrop 250 x 16mm, 2no Alu. tower bolt of 300x12mm and1 no Alu. tower bolt of 200x12mm, 2 Nos Alu.Handles, 1 no door stopper with rubber bush incase of Singleleaf door cost of labour charges for fixing in position etc., complete. All Aluminium furniture fittings are to be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1868/1968 for anodic film thickness of not less than 15 microns,The rate is inclusive cost of fevical and fixing charges, transportation, loading, unloading and all other incidential charges, handling charges etc., complete complying with standard specification and as directed by the departmental officers - Single leaf.Type: Medium Desity Fibre (MDF) Board - Exterior Grade, bothsides pre-lamiated including external lipping with kilndried soft wood Thickness: 35mm thick 27 Supply & fixing of WPC (Wood Polymer Composite) Frame extruded with size 75mm x 50mm. The single core door made of rigid WPC compound with minimum Bulk Density of 900 KG/ Cub.Mt. & shore hardness of 55. Supply & fixing ofWPC door shutter, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550 KG/ Cub.Mt. & shore hardness of 55. For the aesthetic appearance, the door shall be a printed digitally on one side of the shutter and the design is as decided by the Engineer in-Charge of the department. The WPC door shall be fixed onto the WPC frame with 3 Nos of 5” SS Hinges and the door shall have 2 towerbolt on one side and 1 towerbolt or aldrop on other side for locking system and 2 numbers of handle on the either side of the door shutter, all made of aluminium etc., complete complying with standard specifications and as directed by the departmental officers. 28 Renewing the broken GLASS PANESwith new 3mm thick pinned head glass panes including necessary T.W.beedings and labour for fixing in position with all necessary acessories etc., complete complying with standard specification as directed by the departmental officers. 29 Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using adhesive along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work. 30 Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with P or S trap conforming to BIS with crushed stone sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers.(The water closet should be got approved by the Executive Engineer before use on works). 31 Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm P or S trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications.(The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) 32 Supplying, laying and jointing UPVC pipes of Class 6(having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety conforming to BIS of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003)and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications.The PVC pipes shall be got approved by Executive Engineer before use on works -Externalwater supply- Above ground level. 33 40mm dia 34 32mm dia 35 25mm dia 36 20mm dia 37 Supplying and fixing in position the following UPVC Specials of following dia and approved quality and good variety excluding fixing charges but including necessary cutting and threading of UPVC pipes, jointing the UPVC specials and jointing the specials with pipe line using UPVC adhesives etc., complete complying with standard specification. (The UPVC specials should be got approved by the Executive Engineer concerned before use on works.) 38 40mm dia UNION 39 32mm dia UNION 40 25mm dia UNION 41 20mm dia UNION 42 40mm dia ELBOW 43 32mm dia ELBOW 44 25mm dia ELBOW 45 20mm dia ELBOW 46 40mm dia TEE 47 32mm dia TEE 48 25mm dia TEE 49 20mm dia TEE 50 40mmx32mm dia REDUCER 51 32mmx25mm dia REDUCER 52 25mmx20mm dia REDUCER 53 20mmx15mm dia REDUCER 54 25mm dia HEX NIPPLE 55 Supplying and fixing in position first quality and approved variety of Gun metal Gate Valvewith BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements).The valves to be used on work shall be got approved by the Executive Engineer before use on work. 56 40mm dia 57 32mm dia 58 25mm dia 59 Supplying and fixing in position best quality PVC soil / waste pipes of following dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level 60 110mm dia 61 75mm dia 62 Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). 63 110mm dia ELBOW 64 110mm dia TEE 65 110mm dia Y 66 75mm dia ELBOW 67 75mm dia TEE 68 75mm dia Y 69 Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) 70 CI Nahani Trap of size 100 x 75mm with stainless steel gratings 71 Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap / Swan neck tap(heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the works) 72 CP Screw Down Tap 73 Swan Neck Tap 74 CP Two Way Bib Cock with Health Faucet 75 CP Angle Cock Tap 76 SS Heavy Duty Long Body Tap 77 Supplying and fixing in positionStainless Steel Health Faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the work) 78 Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works). 79 Supplying and fixing in position Indian make bevelled edge Special Type Mirror of size 1000 x 780mmof approved quality and brand PVC / Fibre Glass framed 5.5mm thick mirror of following size , Shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) 80 Painting Old wood work with Two coat of synthetic enamel ready mixed paint of approved quality and colour in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) 81 Painting New Wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) 82 Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with One coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) 83 Painting New Iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) 84 Painting Old Plastered Wall Surface with Two finishing coats ofready mixed (Emulsion) of approved quality and colour overthe existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) 85 Painting Old Plastered Wall Surface with Two finishing coats of weather proof Exterior Emulsion paint of approved quality and colour overthe existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) 86 Supplying and fixing of PVC ready made WATER TANK of1000 Litre capacity of best and approved quality with ISI specification and having inlet,outlet, overflow and clearing pipe arrangements and labour charges for fixing in position with all necessary accessories and transporting at site of work including necessary brick work conveyance loading, unloading labour for fixing etc., complete complying as directed by the departmental officers. 87 Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of Fly ash Brick of 23x23x7cm size with Class designation of 7.5 and Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification. 88 Clear Size 0.60mx0.60m 89 Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the departmental officers. 90 50mm thick slab (using 20mm HBGS Jelly) 91 Providing two legged scaffolding using 15cm diameter blue-gum posts or casuarina posts of best quality bamboo posts of 4m over all length (3m+0.5m projection+0.5m into the ground) the distance between the two rows being 1.25m and the spacing of posts being 2m in both the rows with two horizontal posts with 0.5m overlap on either side and braces at2m c/c including longitudinal and transverse middle braces to step up and providing a platform withcountry wood planks of 40mm thick and 1m width etc.,in a complete form using coir and nails 1m run. -upto 13.50m Height. 92 Providing Anti-Termite Treatment to the existing floors, walls by spraying and application of chemicals of IS 6313 to suit the necessity of work and also injecting anti termite chemicals in wall surface and repacking the same with necessary grout. (Measurements taken for the application area for the purpose of payment) including breaking of termit mounds, and including cost of chemicals, labour charges transport and storing etc., complete. 93 Supplying and erecting in position of 50 liters capacity Industrial Model Reverse Osmosis Water-cum Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No.(b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20 Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc.The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.
Contract Date: Nov 03, 2025 Contract Value : 77.57 Lakh
Government Departments No of Bidders 3
14.
Public Administrative Department #8485802 AOC
Up-Gradation Of Safety Works At Bmc Headquarters, Mumbai-5MP AI Dome CameraImage Sensor: 1/2.8 Sony CMOS progressive sensor | Day/Night Operation: Yes with IR Cut Filter | Minimum Illumination: Color: 0.5 lux; B/W 0 Lux with IR | Lens: 2.7~13.5mm ±2mm Motorized Varifocal, auto Focus,| Electronic Shutter: 1/7.5~1/13000 with preferred shutter control | Digital Slow Shutter (DSS): 1/7~1/30 (NTSC); 1/7~1/25 (PAL) | White Balance: Auto/Manual | Automatic Gain Control (AGC): Auto | Noise Reduction: 3D | Image Resolution: 2592 x 1944 | Compression: H.265 / H.264 / MJPEG | Frame Rate and Bit Rate: 30 fps with WDR, Controllable bit rate, frame rate and Maximum Bit rate | Video Streams: Triple streaming, individually configurable streams. Two of the streams configurable at H.265, full resolution, full frame rate | Smart Compression: Smart GOP | Rate Control: CBR, VBR, MJPEG | Motion Detection: Yes, built-in with multiple configurable areas in the video stream | Image Enhancement: Built-in WDR, HLC, BLC | Wide Dynamic Range: 120 dB | IR: 40 Meter (Built-in or External) IR | Alarm & Audio Connectors: 1 Input & 1 Output for Alarm & Audio Interface | Analytics: Video Motion Detection, Tampering detection, Object counting, Line crossing, Zone object counting, Zone intrusion, Loitering, wrong way detection, Object Left, Object Remove; Alarms can trigger email or SMS notification; The VA is Edge based | Event Actions: FTP, HTTP, Email notification, Edge Storage, Alarm Output, Text Overlay | Edge Storage: microSDXC up to 256 Gb | Protocols: TCP/IP, IPv4, IPv6, UDP, DHCP, RTP, RTSP, NTP, FTP, UPnP, HTTP, HTTPS, SSL, SMTP, DDNS, 802.1x, Bonjour/Zero Config, ONVIF S, G, T, M | Text Overlay: Date & time, and a customer-specific text, camera name etc. | Security: IP address filtering, HTTPS encrypted data transmission, IEEE 802.1X, Digest Authentication | Firmware Upgrade: The firmware upgrade must be done through web interface; The firmware must be available free of cost | Interface: RJ45, 100 Base TX | Enclosure: IP66/IP67, IK10; The camera and housing must be of same make | Power Requirements: PoE IEEE 802.3af, Class 3, DC12V | Operating Temperature: -20°C (-4°F) to +50°C (122°F) | Operating Humidity: 10% to 90% RH (non-condensing) | Certification: UL, CE, FCC, BIS, NDAA Compliant |Mount: Wall Mount / Pole Mount | Compatibility: ONVIF Profile S, G, T, M |Certification required STQC , BIS, FCC, CE, NDAA, |Make- Hanwah,pelco, axis ,i-Pro,Bosch. 2 5MP AI Bullet CameraImage Sensor: 1/2.8 Sony CMOS progressive sensor | Day/Night Operation: Yes with IR Cut Filter | Minimum Illumination: Color: 0.5 lux; B/W 0 Lux with IR | Lens: 2.7~13.5mm ±2mm Motorized Varifocal, auto Focus,| Electronic Shutter: 1/7.5~1/13000 with preferred shutter control | Digital Slow Shutter (DSS): 1/7~1/30 (NTSC); 1/7~1/25 (PAL) | White Balance: Auto/Manual | Automatic Gain Control (AGC): Auto | Noise Reduction: 3D | Image Resolution: 2592 x 1944 | Compression: H.265 / H.264 / MJPEG | Frame Rate and Bit Rate: 30 fps with WDR, Controllable bit rate, frame rate and Maximum Bit rate | Video Streams: Triple streaming, individually configurable streams. Two of the streams configurable at H.265, full resolution, full frame rate | Smart Compression: Smart GOP | Rate Control: CBR, VBR, MJPEG | Motion Detection: Yes, built-in with multiple configurable areas in the video stream | Image Enhancement: Built-in WDR, HLC, BLC | Wide Dynamic Range: 120 dB | IR: 40 Meter (Built-in or External) IR | Alarm & Audio Connectors: 1 Input & 1 Output for Alarm & Audio Interface | Analytics: Video Motion Detection, Tampering detection, Object counting, Line crossing, Zone object counting, Zone intrusion, Loitering, wrong way detection, Object Left, Object Remove; Alarms can trigger email or SMS notification; The VA is Edge based | Event Actions: FTP, HTTP, Email notification, Edge Storage, Alarm Output, Text Overlay | Edge Storage: microSDXC up to 256 Gb | Protocols: TCP/IP, IPv4, IPv6, UDP, DHCP, RTP, RTSP, NTP, FTP, UPnP, HTTP, HTTPS, SSL, SMTP, DDNS, 802.1x, Bonjour/Zero Config, ONVIF S, G, T, M | Text Overlay: Date & time, and a customer-specific text, camera name etc. | Security: IP address filtering, HTTPS encrypted data transmission, IEEE 802.1X, Digest Authentication | Firmware Upgrade: The firmware upgrade must be done through web interface; The firmware must be available free of cost | Interface: RJ45, 100 Base TX | Enclosure: IP66/IP67, IK10; The camera and housing must be of same make | Power Requirements: PoE IEEE 802.3af, Class 3, DC12V | Operating Temperature: -20°C (-4°F) to +50°C (122°F) | Operating Humidity: 10% to 90% RH (non-condensing) | Certification: UL, CE, FCC, BIS, NDAA Compliant |Mount: Wall Mount / Pole Mount | Compatibility: ONVIF Profile S, G, T, M |Certification required STQC , BIS, FCC, CE, NDAA, |Make- Hanwah,pelco, axis ,i-Pro,Bosch. 3 Supply, Installation, Testing & Commissioning of IP PTZ cameraParameter Specification: Image Sensor – 1/2.8 CMOS; Effective Pixels – 1920(H) x 1080(V), 2 Megapixels Minimum; S/N Ratio – More than 55dB; Minimum Illumination – Colour: 0.05Lux @ F1.6; 0Lux @ F1.6 (IR on); Focal Length – 32x Optical Zoom, 16x Digital Zoom; White Balance – Auto, ATW, Indoor, Outdoor, Manual; Focus Control – Auto / Manual; AGC Control – Auto / Manual; Back Light Compensation – BLC / HLC / WDR (120dB); Pan Travel – 0°360° endless; Pan Speed – 0.1° ~ 300°/sec; Tilt Travel – -15° ~ 90° auto flip 180°; Tilt Speed – 0.1° ~ 200°/sec; Manual Speed – Pan: 0.1° ~ 300°/s; Tilt: 0.1° ~ 200°/s; Presets – 300; Day/Night IR Cut Filter – Auto (ICR) / Color / B/W; Video Compression – H.265 / H.264 / MJPEG; Video Streaming – Main stream: 1080P/720P/1.3M (125/30fps); Sub stream2: 1080P/1.3M/720P/D1/CIF (1~25/30fps); Networking – RJ-45 (10/100Base-T); Protocols – IPv4/IPv6, HTTP, HTTPS, SSL, TCP/IP, UDP, UPnP, ICMP, IGMP, SNMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, PPPOE, DDNS, FTP, IP Filter, QoS, 802.1x, ONVIF, PSIA, CGI; Alarm – 2 In / 1 Out; Operating Temperature – -40ºC ~ 70ºC; Weatherproof Standard – IP66; Power Source – AC 24V / 3A (±10%), PoE+ (802.3at); Power Consumption – 13W (normal), 23W (IR on); Memory – Up to 128GB; Certification – STQC/NDAA/UL/GDPR/NIST/TPM/ISO 27032/Indian Govt; OEM Make – Pelco /Vicon/Hanwha/Axis/Bosch. 4 4K AI Bullet CameraImage Sensor: 1/2” progressive scan RGB CMOS | Day/Night Operation: Yes with IR Cut Filter | Minimum Illumination: Colour: 0.5 lux; B/W: 0 Lux with IR | Lens:7–210 mm (+/-7mm), IR corrected, Megapixel, Motorized Zoom, Auto Focus | Electronic Shutter: 1/7.5 to 1/15000 sec | Image Resolution: 3840x2160 | Compression: H.264, H.265 | Frame Rate & Bit Rate: 30 fps with WDR, controllable bit rate and frame rate | Video Streams: 4 streams, individually configurable, H.265, full resolution and full frame rate | Motion Detection: Built-in with multiple configurable areas | Defog: Built-in | Electronic Image Stabilization: Built-in | Image Enhancement: Built-in WDR, HLC, BLC, Barrel/Lens Distortion | Wide Dynamic Range: Up to 120dB | IR: 70 meters (Built-in or External) | Alarm & Audio Connectors: 1 Input & 1 Output | Analytics: Intrusion, Line Crossing, Unattended Object, Missing Object, Slip & Fall Detection, Vehicle Subtypes (Car, Pickup Truck, Large Truck, Van, Bicycle, Motorcycle, Bus), People, Crowd Size & Growth | Event Actions: FTP, HTTP, Email Notification, PTZ Preset, Edge Storage, Alarm Output, Text Overlay | Edge Storage: 256 GB or Above | Protocols: IPv4, IPv6, TCP/IP, UDP/IP, RTP (UDP/TCP), RTCP, RTSP, NTP, HTTP, HTTPS, SSL/TLS, DHCP, FTP, SMTP, ICMP, IGMP, SNMPv1/v2c/v3 (MIB-2), ARP, DNS, DDNS, QoS, LLDP, CDP, SRTP (TCP/UDP Unicast), MQTT | Text Overlay: Date & Time, Custom Text, Camera Name, Graphic Image | Security: HTTPS (SSL), Digest Login, IP Filtering, User Access Log, 802.1X (EAP-TLS, EAP-LEAP), ETSI EN 303 645, Secure Element (FIPS 140-3 Level 3, CC EAL6+), Secure Boot, Firmware Forgery Verification, Brute-force Prevention | Firmware Upgrade: Web-based, Free of Cost | Interface: RJ-45, 100Base-TX | Memory: 2GB RAM, 512MB Flash | Enclosure: IP66/IP67, IK10, NEMA 4X | Power Requirement: PoE | Operating Temperature: 0°C to 55°C | Operating Humidity: Max 90% RH | Certification: UL, CE, FCC, BIS, ROHS, EMC, NDAA Compliant | Safety: UL 62368-1, CAN/CSA C22.2 NO. 62368-1, IEC/EN 62471 | Environment: IEC/EN 63000, IEC/EN 60529 IP66/IP67, IEC/EN 62262 IK10, NEMA-TS2 (2.2.7.2–8, 2.2.8, 2.2.9), NEMA 250 Type 4X | API: Interface for integration with 3rd party analytics and public domain applications | Mount: Wall Mount / Pole Mount | Compatibility: ONVIF Profile S, G, T, M |Certification required STQC , BIS, FCC, CE, NDAA, |Make- Hanwah,pelco, axis ,i-Pro,Bosch. 5 Supply of ANPR license with Processing Unit with Central Control Software 6 Installation&Commissioning of ANPR licensewithProcessingUnit with Central Control Software 7 Face Recognition System System Type: AI-based Face Recognition system for real-time and recorded video analytics | Applications: Security & surveillance, access control, people management, process automation, and business intelligence | Facial Detection: Detects faces with a minimum of 10 pixels IOD (Interocular Distance) | Facial Recognition: Recognizes faces from 24 pixels IOD (50 pixels recommended) | Recognition Accuracy: ≥ 90% | Identification Speed: ≤ 0.1 seconds within a database of 1 million entries | Processing Capacity: Capable of handling up to 600 fps in 1080p HD video | Demographics Detection: Supports gender and age detection | Custom Lists: Unlimited list creation (e.g., White List, Black List, VIP List) | Real-Time Alerts: Alerts generated based on list match in real-time | Supported Operating Systems: Windows 10 and later; Windows Server 2016 and later | Platform Architecture: 64-bit (x64) | Hardware Acceleration: Intel OpenVINO/ NVIDIA TensorRT supported | Database Support: Compatible with MySQL, PostgreSQL, MS SQL, and Oracle | Input Stream Protocols: RTSP, HTTP, HTTPS, ONVIF | Video File Formats: MKV, MP4, ASF, AVI, MJPEG | Supported Codecs: MPEG-4, MJPEG, H.264, H.265 | Output Formats: JSON, XML, CSV, PDF | User Access Control: Role-based access via Active Directory / LDAP integration | Data Security: Encryption of all communication packages | Centralized Management: Central dashboard for analytics and system control | Business Logic Builder: Enables creation of custom workflows and logic | Notification System: Real-time notification and event triggering based on defined conditions | Event Statistics: Dashboard with hourly, daily, weekly, and monthly analytics | BI Tool Integration: Integration with Microsoft Power BI, Google Data Studio, etc. | Language Support: Multi-language user interface supported 8 Server For Facial RecognitionsystemProcessor (CPU) Intel Xeon Silver/Gold Series, minimum 12 cores, scalable architecture | Memory (RAM) 32 GB DDR5 ECC Registered RAM (RDIMM), expandable up to 128 GB or higher | Primary Storage (SSD) 240 GBSSD, 2.5 or| Operating System Microsoft Windows Server 2019 or newer, 64-bit, OEM Licensed | Graphics Processing Unit (GPU) NVIDIA RTX 4070 or server-grade GPU (e.g., NVIDIA A4000) | Power Supply Unit (PSU) Minimum 750W High-Efficiency Redundant PSU, 80 Plus Gold or Platinum Certified | Chassis / Form Factor Rackmount (2U/4U) or Tower Server Chassis with optimized airflow and expansion | Network Interface Dual/Quad-port Gigabit Ethernet (RJ45)| Cooling System Enterprise-grade cooling with redundant fans or liquid cooling as required | Certifications RoHS, CE, FCC, Microsoft Windows Server Certification, OEM Compliance Certificate |Make / OEM: HP/Dell 9 FIBRE OPTIC CABLE 10 SITC of 8TB Storage (HDD) 11 Supply, Installation, Testing & Commissioning 42 U Rack with Require IPDU and Rack mount KVM Switch with 17 Integrated Display 12 SITC of 9 inch Rack 13 Light Interface Unit (LIU) 14 SC connector per core 15 SITC of Sc-SC Duplex fibre patch cord SM 9/125 - 3mtr 16 Category 6 Shielded Outdoor CableCable Type: Category 6 (Cat 6), Armoured with steel wire or corrugated steel tape, U/UTP, F/UTP, or SF/UTP (as per requirement), Solid Bare Copper (23 AWG) | Conductor and Insulation: Conductor Diameter 0.56 mm to 0.58 mm, 99.99% Pure Bare Copper, Insulation Material: High-Density Polyethylene (HDPE), 4 twisted pairs |Shielding & Armouring: Shielding F/UTP or SF/UTP, Armor: Galvanized Steel Wire or Corrugated Steel Tape, Protection: Anti-rodent and anti-termite, Drain Wire: Tinned copper (in shielded cables) |Outer Sheath: UV-resistant, flame-retardant Polyethylene or LSZH, Colour: Black (standard for outdoor use), Outer Diameter: Approx. 10–12 mm, Marking: Sequential length marking at every 1 meter |Performance Standards: Compliance with ANSI/TIA-568.2-D, ISO/IEC 11801, EN 50173, RoHS, Application: 10/100/1000 Base-T Ethernet, PoE/PoE+, CCTV over IP | Environmental Specifications: Operating Temp: -20°C to +75°C, Storage Temp: -40°C to +75°C, UV Resistance: Yes, Water Resistance: Water-blocking gel or dry tape (optional), Installation: Direct burial, duct, or conduit |Certifications Required: UL / ETL / CE, OEM Test Report, RoHS, Factory Test Certificate |Make / OEM: CommScope / Belden / R&M / AMP / Digisol 17 SITC of 24 Port CAT-6 UTP Jack panel with cable manager 18 3 Feet Patch Chord 19 Supply, Installation, Testing & commissioning of 42inches LED monitor, Full HD Resolution, Backlight LED, Brightness : 400 NITS min., Contrast : 1200 : 1 or better., Power supply : 230 ±10%, 50 Hz. 20 24 Port +4 10G SFP+ Fibre Optic Switch 21 Supply, Installation, Testing & Commissioning of 24 Port 1G switch 22 SITC of Single Mode 1G SFP - 10KM Module with installation 23 Supply, intsallationof Operator terminal Intel Processor basedPCwith i7 processor,1TBHDD,16 GB RAM, 20.5 inch LED Monitor,4GBgraphiccard with NVIDA facility,with the Licencse copy of operating System, Microsoft office. With 256 GB SSD. 24 Recording Server for VMS Software support up to 70 CCTV Camera (5MP)Form Factor 2U Rack Server | Processor Intel Xeon Silver 4310, 2.1GHz, 12C/24T, 10.4GT/s, 18MB Cache, Turbo, Hyper-Threading, 120W, DDR4-2666 | Memory 32GB RDIMM DDR4, 2666 MT/s, ECC, up to 16 DIMM slots | Storage Chassis 3.5 with up to 8 Hot-Swap Hard Drives | RAID Controller PERC H755 RAID Controller | Power Supply Dual Hot-Plug Redundant PSU (1+1), 800W, Mixed Mode | Additional Features Redundant power, high availability design, scalable memory and storage capacity| Operating System Microsoft Windows Server 2019 or newer, 64-bit, OEM Licensed|Make / OEM: HP/Dell 25 Supply of VMS software camera License for ENTERPRISE Master server system: Make. Hanwah,pelco, axis ,i-Pro,Bosch and Network Optix. 26 VMS Maintenance and support services per year 27 Splicing of OFC Cable (Per pair) 28 Supply, Installation, testing, commissioning, performance demonstration of 2 KVA UPS true online with 1 phase input, 1 phase output with back up batteries for 2 Hours backup along with rack & connectors. 29 1st category Cu armoured cables FRLS outer sheathed- 4C x 2.5 Sq.mm 30 IP 42 Wall/column Mounted distribution board with one Nos of DP 16/32A MCB as incomer and 2 Noss 6A/10A SP MCB as outgoing (8 way SPN DB) 31 Clean Agent Fire Extinguisher 32 Rebate of old Cameras / DVRs along with cables and accessories. 33 CSMC 5% for 2nd year after completing 1 year DLP 34 CSMC 5% for 3rdyear 35 CSMC 5% for 4thyear 36 CSMC 5% for 5thyear
Contract Date: Dec 24, 2025 Contract Value : 4.27 Crore
Local Bodies No of Bidders 3
Maharashtra View Result →
15.
Defence #8340036 AOC
Tender For Repair Replacement Of Ber Lifts In Kolkata Mil Station.; 1 NOTE (Applicable for all items) :-(i) The bidders/contractorsare advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.SCHEDULE A PART-I (B/R PORTION) 2 Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed 3 All as per item No. 1.001 above but 5 storey to 8 storey 4 All as per item No. 1.001 above but 9 storey to 12 storey 5 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.(upto 4 storey) 6 All as per item No. 1.004 above but 5 storey to 8 storey 7 All as per item No. 1.004 above but 9 storey to 12 storey 8 Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.( upto 4 storey) 9 All as per item No. 1.007 above but 5 storey to 8 storey 10 All as per item No. 1.007 above but 9 storey to 12 storey 11 Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) area exc 1.5 sqm but not exc 4 sqm eachcomplete all as specified and directed (up to 4 storey high building). 12 All as per item No. 1.010 above but 5 storey to 8 storey 13 All as per item No. 1.010 above but 9 storey to 12 storey 14 Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) area n exc 1.5 sqm complete all as specified and directed (up to 4 storey high building). 15 Material and labour for 10 mm thick screed bed in cement mortar 1:4 mixed with Water Proofing Compound as per manufactures instructions and top surface finished even and smooth to recieve water proofing treatment complete all as specified and as directed .Note : Water Proofing Compound shall be measured and paid separately. 16 Material and labour for 18-20 mm thck machine cut Kota Stone slab flooring set and jointed with grey cement slurry mixed withpigment to match the shade of the slab including rubbing and polishing, laid over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed(upto 4 storey) 17 All as per item No. 1.015 above but 5 storey to 8 storey 18 All as per item No. 1.015 above but 9 storey to 12 storey 19 Material and labour for coloured non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc. set and jointed in neat cement slurry over a bedding layer of scread bed 15 mm thick in CM 1:4 and pointed in white/colour cement to match.(upto 4 storey) 20 All as per item No. 1.018 above but 5 storey to 8 storey 21 All as per item No. 1.018 above but 9 storey to 12 storey 22 Material and labour for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing in wall, jambs , pillars etc complete with 10 mm cement plaster 1:4 all as spdand directed EIC.(upto 4 storey) 23 All as per item No.1.021 above but 5 storey to 8 storey 24 All as per item No.1.021 above but 9 storey to 12 storey 25 Chipping of unsound /weak concrete materials from slabs , beams, columns ,lintel,chajja, fin , facia etc. by any meansincluding tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting incl foreign matrials , loose concrete/aggregate etcand disposal of all debris out of MOD land and complete all as specifiedandas directedby Engr-in-Charge. for 50mm average thickness for slabs/Chajja/beams 26 All as per item No.24 above but 5 storey to 8 storey 27 All as per item No.24 above but 9 storey to 12 storey 28 Removing of concrete all around reinforcement including from behind the reinforcing bars to give an average 25mm (but not less than 15mm clear air gap) by manual methods (using wire brushing, chiselling etc) and applying alkaline rust removing chemical followed by removing rust including from behind the reinforcing bars by emery paper and cleaning the area throughly by water and allow it to dry all as per manufacturer,s instruction to give it a totally rust free finished steel surfaceupto 4 storey complete all as specified and directed. 29 All as per item No 1.027 above but 5 storey to 8 storey 30 All as per item No 1.027 above but 9 storey to 12 storey 31 Material and labour for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm upto 4 storey complete all as specified and directed. 32 All as per item No1.030 above but 5 storey to 8 storey 33 All as per item No 1.030 above but 9 storey to 12 storey 34 Supply and application of Epoxy Zinc rich primer on the prepared steel surface by brush the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2upto 4 storey High complete all as specified and directed by Engr-in-charge. 35 All as per item No 1.033 above but 5 storey to 8 storey 36 All as per item No 1.033 above but 9 storey to 12 storey 37 Material and labourfor providing and placing in position free flow non shrink cementitious micro concrete of Grade of M-50 to the effected beam, column etc. The micro concrete shall have a minimium 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minimum tensile strength 5N/mm2 @ 28 days, minimium flextural strength 5N/mm2 @ 28days and complete all as specified and directed by Engr-in-Charge ofColumn, upto 4 storey High. 38 All as per item No 1.036 above but 5 storey to 8 storey 39 Supply, mixing and application two component structural grade polymer modified reinstatement morter, where local spalling has taken place or shuttering is not possible. The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 complete all as specified and directedby the Engr-in-charge upto 25 mm average thickness and upto 4 storey High. Make :- Sika/Fosroc NOTE :- Cement and sand morter in proportion of 1:2 graded coarse sand with polymer admixed in proportions approved by Engr-in-charge. 40 All as per item No 1.038 above but 5 storey to 8 storey 41 All as per item No 1.038 above but 9 storey to 12 storey 42 Material and labour for applying polymer modified cement mortar rendering 15 mm thick in CM 1:3 on wall duly mixing polymer modifier Nitobond SBR of M/s Forsoc Chemical India (Pvt) Ltd or Hind Styrene BR of Hindcon Chemical Ltd or equivalent make of M/s Pidilite Industries @ 7 Litre per bag of cementcomplete finished even and smooth without using extra cement complete all as specified and as per manufacturers specification. 43 All as per item No.1.041 above but 5 storey to 8 storey 44 All as per item No.1.041 above but 9 storey to 12 storey 45 Material and labour for introducing new reinforcement bars for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc all as specified and directed by Engr-in-charge. upto 12 mm dia bar upto 4 storey High. 46 All as per item No 1.044 above but 5 storey to 8 storey 47 All as per item No 1.044 above but 9 storey to 12 storey 48 Material and labour for applying curing compound over concrete surfaces as per manufactures instruction complete all as specified and directed by Engr-in-charge upto 4 storey High. 49 All as per item No 1.047 above but 5 storey to 8 storey 50 All as per item No 1.047 above but 9 storey to 12 storey 51 Supply and fixingpowder coated anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified 52 Supply and fixing powder coated anodised aluminium window and ventilator shutters, side hung type with sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays hinges and handles (2 no.) etc with 4mm thick tinted/frosted glass ordinary quality as per manufactures instruction complete all as specified 53 Supply and fixingAnodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. 54 Material and labour for 25mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub bases of floors complete all as specified and directed. 55 Material and labour for Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications and Manufacturers instructions, complete all as specified and as directed:-(a) Preparing fully dried plastered surface as per IS:3067-1966, for further treatment.(b) Applying Bitumen Primer conforming to IS-3384-1986, over the Cleaned Plastered Surface @ 0.3 Litre per Sqm.(c) Applying a layer of APP based Polymeric Membrance; 3.0mm thick (minimum) weighing 3.50 Kilogram per Square Meter (reinfored) with Polyster Non Woven Fabric weighing not less than 160 Grams per Square Metre by Torch application. The overlaps shall be minimum 100mm on the Transverse direction and 75mm on Longitudinal direction.(d) Applying one coat of Aluminium Paint @ 0.10 Litre per Sqm over APP based Polymeric Membrane. 56 Supply only integral water proofing compound (ISIgrade only) 57 Material and labour forcutting out cracks to V section in existing roofs of terracing cleaning out, wetting, grouting, with cement sand slurry 1:3 complete all as specified and as directed 58 Material and labour forTMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.(upto 04 storey) 59 All as per item No. 1.057above but 5 storey to 8 storey 60 All as per item No. 1.057 above but 9 storey to 12 storey 61 All as per item No. 1.057 above but 6 to 8mm dia n stirrups, spacers and binders complete all as specified and as directed. (upto 04 storey) 62 All as per item No. 1.060 above but 5 storey to 8 storey 63 All as per item No. 1.060 above but 9 storey to 12 storey 64 Material and labour brick work with fly ash brick straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) completeall as specified and directed by Engineer-in-Charge. 65 All as per item No. 1.063 above but 5 storey to 8 storey 66 All as per item No. 1.063 above but 9 storey to 12 storey 67 M & L for brick work with fly ash bricks old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed. 68 All as per item No. 1.066 above but 5 storey to 8 storey 69 All as per item No. 1.066 above but 9 storey to 12 storey 70 Demolition of PCC in ground floorand pavings not exc 15 cm thickness below or above ground level complete all as specified and directed. 71 All as per item No. 1.069 above but 5 storey to 8 storey 72 All as per item No. 1.069 above but 9 storey to 12 storey 73 Demolition of cement concrete (reinforced) in ground floor and paving not exceeding 15 cm thick (below or above G.L) all as specified and directed 74 All as per item No. 1.072 above but 5 storey to 8 storey 75 All as per item No. 1.072 above but 9 storey to 12 storey 76 Material and labour for Any thick PCC (1:3:6) type C2(20 mm graded stone agg) as in flooring, finished even and smooth with using extra cementcomplete all as specified and directed. 77 All as per item No. 1.075 above but 5 storey to 8 storey 78 All as per item No. 1.075 above but 9 storey to 12 storey 79 Material and labour for10 mm thick rendering in cement mortar (1:6) to brick or concrete wall surfaces, finished even and smooth without using extra cement all as specified and as directed by the Engineer-in-Charge. 80 Material and labour for Rendering on ceiling 5 mm thick in cement mortar (1:3) onof concrete surface finished even and smooth with out using extra cement complete all as specified and directed. 81 All as per item No. 1.079 above but 5 storey to 8 storey 82 All as per item No. 1.079 above but 9 storey to 12 storey 83 Material and labour for 15mm thick plastering on fair face of brick wall and concrete surface in CM (1:4) surface finished even and fair complete all as specified and directed. 84 All as per item No. 1.082 above but 5 storey to 8 storey 85 All as per item No. 1.082 above but 9 storey to 12 storey 86 Material and labour for Complete removal of existing treatment of old surface and applying two coat of OBD incl 1mm thick birla white putty etc all as specified and directed complete all as specified and directed 87 All as per item No. 1.085 above but 5 storey to 8 storey 88 All as per item No. 1.085 above but 9 storey to 12 storey 89 Material and labour for prepration of new plasterd surface and applying two coat of oil Emulsion distamper etc complete all as specified and directed. 90 Material and labour for one coat of white wash on old decorated surface of internal walls incl preparation complete all as specified and directed by Engr-in-Chargeupto 4 storey bldg. 91 All as per item No. 1.089 above but 5 storey to 8 storey 92 All as per item No. 1.089 above but 9 storey to 12 storey 93 Material and labour for one coat of white wash on old decorated surface of ceiling incl preparation complete all as specified and directed by Engr-in-Chargeupto 4 storey bldg. 94 All as per item No. 1.092 above but 5 storey to 8 storey 95 All as per item No. 1.092 above but 9 storey to 12 storey 96 Material and labour for three coat of white wash on new decorated surface of internal walls incl preparation complete all as specified and directed by Engr-in-Charge upto 4 storey bldg. 97 All as per item No. 1.095 above but 5 storey to 8 storey 98 All as per item No. 1.095 above but 9 storey to 12 storey 99 Material and labour for three coat of white wash on new decorated surface of ceiling incl preparation complete all as specified and directed by Engr-in-Charge. 100 All as per item No. 1.098 above but 5 storey to 8 storey 101 All as per item No. 1.098 above but 9 storey to 12 storey 102 Taking out/Stripping of old Roof treatment membranes/Tar felt incl layer ofcement mortar of any type carefully from roof surfaces (without damaging roof ) and incl preparation of old roof surfaces by picking, sweeping, cleaning and washing down with water to remove dust & receive new treatment complete all as specified and directed. 103 Material and labour for 100mm thick PCC 1:2:4 type B-1 using 20 mm graded aggregate finished even and smooth finishing cement concrete surface even and smooth without using extra cement complete all as specified. 104 Supply and fixing in repair 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial typecomplete all as spd and directed. (Upto 4 storey bldg) 105 All as per item No. 1.103 above but 5 storey to 8 storey 106 All as per item No. 1.103 above but 9 storey to 12 storey 107 Dismantling wrough iron or mild steel work of any description not otherwise provided for complete all as directed. 108 Supply and fixing in repairs Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete Gauzed with glazing bars, dovetailed or welded complete including taking down old steel window all as specified and as directed by Engineer-in-charge. (Upto 4 storey bldg) 109 All as per item No. 1.107 above but 9 storey to 12 storey 110 Supply and fixingin repairs Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete Gauzed without glazing bars, dovetailed or welded complete including taking down old steel window all as specified and as directed by Engineer-in-charge. 111 Supply and fixing in repair framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars barred iron doors; ladders framed alusters; wald ways; railings; framework of water tanks and similar work confrming to Fe-290 Gde -E 165. 112 Supply and fixing in repair framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars barred iron doors; ladders framed alusters; wald ways; railings; framework of water tanks and similar work confrming to Fe-290 Gde -E 165.(9 storey to 12 storey) 113 Supply and fixing hard drawn steel wire fabric weight exceeding 4.0 Kg/Sqm cut to lengths, bent to shape required and welded to angle /channel complete all as specified and directed by Engineer-in-Charge. 114 Supply and fixing 100 mm long butt hinges medium weight, cold rolled mild steel and fixed complete complete all as spd and directed.(Upto 4 storey bldg) 115 Supply and fixing aluminium anodised handles cast type, anodised 150mm long complete all as spd and directed.(Upto 4 storey bldg) 116 All as per item No. 1.114 above but 5 storey to 8 storey 117 All as per item No. 1.114 above but 9 storey to 12 storey 118 Supply and fixing aluminium anodised tower bolt cast type, anodised 200 mm long complete all as spd and directed.(Upto 4 storey bldg) 119 All as per item No. 1.117 above but 5 storey to 8 storey 120 All as per item No. 1.117 above but 9 storey to 12 storey 121 Supply and fixing 300mm long sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bots and sliding bolts of extruded or cast aluminium alloy (Upto 4 storey bldg) 122 All as per item No. 1.120 above but 5 storey to 8 storey 123 All as per item No. 1.120 above but 9 storey to 12 storey 124 Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc, upto 4 storey bldg all as spd and directedby the Engr-in-charge 125 All as per item No. 1.123 above but 5 storey to 8 storey 126 All as per item No. 1.123 above but 9 storey to 12 storey 127 Material and labour for Green / White marble work 18 to 20 mm thick (table rubbed and polished ) in steps, jambs, piller, window cills, cooking platform and including 15mm screedbed of cement mortar (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with marble shade complete all as specified and directed. 128 All as per item No. 1.126 above but 5 storey to 8 storey 129 All as per item No. 1.126 above but 9 storey to 12 storey 130 Supply and fixing 4mmplain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area of glass not exc 0.5 sqm each pane. (Upto 4 storey bldg) 131 All as per item No. 1.129 above but 5 storey to 8 storey 132 All as per item No. 1.129 above but 9 storey to 12 storey 133 Hacking out old brokenglass (any thickness, size, quality or description) from wooden frames/steel/aluminiumframes glazed with putty or fixed with beads complete. 134 Supply and fixingstainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples incl of dismentling all as directed by Engr in charge.(Upto 4 storey bldg) 135 All as per item No. 1.133 above but 5 storey to 8 storey 136 All as per item No. 1.133 above but 9 storey to 12 storey 137 Material and labour for Pressed steel frames for doors with one or more rebates size of frame 105 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.Note:- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate 138 All as per item No. 1.136 above but 5 storey to 8 storey 139 All as per item No. 1.136 above but 9 storey to 12 storey 140 M&L for PCC 1:3:6type C-1 using 20mm graded stone agg as in bedblocks/hold fast complete all as specified and directed 141 All as per item No. 1.139 above but 5 storey to 8 storey 142 All as per item No. 1.139 above but 9 storey to 12 storey 143 Demolition of brick work or stone masonary built in cement mortor including all quoins & jambs etc. complete all as specified and directed 144 All as per item No. 1.142 above but 5 storey to 8 storey 145 All as per item No. 1.142 above but 9 storey to 12 storey 146 Cutting opening in cement concrete walls (any description)With or without reinforcementfor door, window and other openings(with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc.(upto 4 storey) 147 All as per item No. 1.145 above but 5 storey to 8 storey 148 All as per item No. 1.145 above but 9 storey to 12 storey 149 Cutting opening in cement concrete walls (any description) With cut of reinforcement for door, window and other openings(with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc.(upto 04 storey) 150 All as per item No. 1.148 above but 5 storey to 8 storey 151 All as per item No. 1.148 above but 9 storey to 12 storey 152 M&L for RCC(Nominal Mix) in type-A1 1:1.5:3 (20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specfified and directed 153 All as per item No. 1.151 above but 5 storey to 8 storey 154 All as per item No. 1.151 above but 9 storey to 12 storey 155 Use and waste formwork square, rectangular or ploygonal fair finished surfaces to slides of pillars, post, struts, piers, columns and stanchions complete all as specified. 156 All as per item No. 1.154 above but 5 storey to 8 storey 157 All as per item No. 1.154 above but 9 storey to 12 storey 158 Use and waste for formwork to side and soffits of floor or roof beams, beam haunching, girders, bressummers, lintel, cantilevers, shelves incl support overhangs etc also splays between floors and beams etc all as sped & directed for rough finished surfaces including edges complete all as specified and directed. 159 M&L for two coats of synthetic enamel paint over a coat of pink primer areaexc.10cm width or girthover new wooden surfacesincluding preparationof surface complete complete in all respect as spd 160 All as per item No. 1.158 above but 5 storey to 8 storey 161 All as per item No. 1.158 above but 9 storey to 12 storey 162 M&L for one coat of synthetic enamel paint on oldwooden surfacesincluding preparationof surface complete complete in all respect as specified (up 9 to 12storey High of building) 163 Material & labour preparation of new steeland iron surfaces of any description areaexc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat ofred oxide and zinc chrome primer,complete in all respect as specified. 164 All as per item No.1.162 above but 5 storey to 8 storey 165 All as per item No.1.162 above but 9 storey to 12 storey 166 Material and labour forPreparing new plastering Surfaces of wall applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed. 167 Material and labour for complete removal of old Surfaces of wall applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed. 168 All as per item No.1.166 above but 5 storey to 8 storey 169 All as per item No.1.166 above but 9 storey to 12 storey 170 Supply and fixing Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. Fe 410 W (Gde-E-250) quality A etc all as sped & directed 171 All as per item No.1.169 above but 5 storey to 8 storey 172 All as per item No.1.169 above but 9 storey to 12 storey 173 Supply and fixing Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment (upto 04 storey) 174 All as per item No. 1.172 above but 5 storey to 8 storey 175 All as per item No. 1.172 above but 9 storey to 12 storey 176 Material & labour for preparation of old steeland iron surfaces of any description areaexc 10 cm width or girth and applying one coat of synthetic enamel paint complete in all respect as specified. 177 All as per item No. 1.175 above but 5 storey to 8 storey 178 All as per item No. 1.175 above but 9 storey to 12 storey 179 SCHEDULE A PART-II ( E/M PORTION) 180 Dismantling and taking down carefully all electrical and mechanical components, assemblies, sub systems such as drives, machine, control panels, lift car, ropes, guides, counterweights, rails, beams and doors, electrrical wirings, control wiring etc. complete of existing beyond economical repairs (BER) lifts including taking down all steel work and components from machine room, lift shaft, lift pit and stacking neatly all retrieved components deposit to departmental store for safe custody and for persual of BOO and making good the disturbed surface in machine room at all landings and in lift door faces to mactch with existing surfaces, all as directed at site by Engr in charge for the foloowing lifts :( Making good to disturbed surfaces will be paid under relevant items listed in B/R works here in after) 181 Dismantling of the old 13 passenger lift machine ( G+12) and all connected accessories and depositing in the mes store yard complete all as specified and directed(Bldg- Hooghly View) 182 Dismantling of the old 10 passenger lift machine ( G+12) and all connected accessories and depositing in the mes store yard completeall as specified and directed(Bldg T V -16) 183 Dismantling of the old 13 passenger lift machine ( G+10) and all connected accessories and depositing in the mes store yard completeall as specified and directed (Bldg- P-197 & 198 BMC) 184 Dismantling of the old 08 passenger lift machine ( G+10) and all connected accessories and depositing in the mes store yard complete all as specified and directed (Bldg no P-197-02, P-198-02 (BMC), Map A-01, Map B -01(Vijay Durg) 185 Dismantling of the old 06 passenger lift machine ( G+10) and all connected accessories and depositing in the mes store yard completeall as specified and directed (Bldg No TV-18) 186 Dismantling of the old 08 passenger lift machine ( G+9) and all connected accessories and depositing in the mes store yard complete all as specified and directed (Bldg No- JSA I & II , Vijay Durg) 187 Dismantling of the old 8 passenger lift machine ( G+7) and all connected accessories and depositing in the mes store yard complete all as specified and directed (Bldg - P-173 BMC) 188 Dismantling of the old 13 passenger lift machine ( G+6) and all connected accessories and depositing in the mes store yard completeall as specified and directed (Bldg No - P-127 (BMC) 189 Dismantling of the old 8 passenger lift machine ( G+6) and all connected accessories and depositing in the mes store yard completeall as specified and directed (Bldg No - Map C (Vijay Durg), T V - 15) 190 Dismantling of the old 6 passenger lift machine ( G+5) and all connected accessories and depositing in the mes store yard complete all as specified and directed (Bldg No - TV 13 and TV-14) 191 Dismantling of the old 8 passenger lift machine ( G+5) and all connected accessories and depositing in the mes store yard complete all as specified and directed (Bldg No - P-1 (Vijay Durg) 192 Dismantling of the old 6 passenger lift machine ( G+4) and all connected accessories and depositing in the mes store yard complete all as specified and directed (Bldg No - O-32 IGS) 193 Dismantling of the old 8 passenger lift machine ( G+2) and all connected accessories and depositing in the mes store yard completeall as specified and directed (Bldg No - MES IB (Vijay Durg) 194 Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift withsingle speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+12 upper floors with ACVariable Voltage Variable Frequency (VVVF) Regenerative (Cosed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the carto announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator, announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 13 passenger as per the details given belowcomplete all as specified and directed:-(Location of lift :Hoogly View) 195 (a) Type & capacity: 13 Passenger, 884 Kgs - Gearless (b) Speed:1.5 M/Sec (c) Type of Drive:VVVF Regenerative (Closed Loop)(d) Type of control :Microprocessor based Simplex full Collective control (e) Location of Machine Room:Top of Building (As existing) (f)Machine : Gearless Machine(g) Travel :As per existing site to serve G+12 floor (h) Serving :G+ 12 upper floors- (13 Stops, 13 landings, 13 openings) (j)Existing Well size:As existing at site (as per Appx `A attached) 196 (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665. 197 (l) Head Room : As per existing site. (m) Power supply :415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule.(p)Car Enclosure :Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code.(q)Car Size : As per NBC 2016 or other relevant BIS code of latest edition..(r) Flooring:18-20mm thick granite flooring. (s) No of Entrance :One location - Front. 198 (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(v) Clear opening for door : As per existing site.(w) Floor Designation : 0,1,2,3,4,5,6,7,8,9,10,11,12(x)Indicators : Car & Landings: Direction & Position Indicator/ call registration LEDs(y)Roping : Lift rope shall be provided as perNBC-2016 andIS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square andfactor of safety shall be 8.6(z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided.(ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad)Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be providedfor elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure. 199 (ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided.(af)Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag)Micro- Stroke illuminated push buttons shall be provided.(ah) All landing door shall be one hour fire rated.(aj) Car door lock shall be provided.(ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided.(al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finishedstainless steel (1.5mm) panel to be provided on all side above hand rails.(am) MS Pit Ladder shall be provided.(an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline).(ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. 200 (ar) Hall fixtures face plate : Stainless steel (Hairline).(as) Hall button arrangement :Hall button with FPI.(at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Firemans service. Emergency car light unit,Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised withcar door opening/closing system.(au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where requiredshall be provided by the contractor(av) Ventilation : High powered axial flow fan with suitable air throw of 600 CFM through a duct all around the car so that uniform air flow shall be available at all side of the car. 201 Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift withsingle speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+12 upper floors with ACVariable Voltage Variable Frequency (VVVF) Regenerative (Cosed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the carto announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator, announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 10 passenger as per the details given belowcomplete all as specified and directed:-(Location of lift :TV 16) 202 (a) Type & capacity: 10 Passenger, 680 Kgs - Gearless (b) Speed:1.5 M/Sec (c) Type of Drive:VVVF Regenerative (Closed Loop)(d) Type of control :Microprocessor based Simplex full Collective control (e) Location of Machine Room:Top of Building (As existing) (f)Machine : Gearless Machine(g) Travel :As per existing site to serve G+12 floor (h) Serving :G+ 12 upper floors- (13 Stops, 13 landings, 13 openings) (j)Existing Well size:As existing at site (as per Appx `A attached) 203 (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665. 204 (l) Head Room : As per existing site. (m) Power supply :415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule.(p)Car Enclosure :Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code.(q)Car Size : As per NBC 2016 or other relevant BIS code of latest edition..(r) Flooring:18-20mm thick granite flooring. (s) No of Entrance :One location - Front. 205 (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(v) Clear opening for door : As per existing site.(w) Floor Designation : 0,1,2,3,4,5,6,7,8,9,10,11,12(x)Indicators : Car & Landings: Direction & Position Indicator/ call registration LEDs(y)Roping : Lift rope shall be provided as perNBC-2016 andIS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square andfactor of safety shall be 8.6(z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided.(ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad)Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be providedfor elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure. 206 (ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided.(af)Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag)Micro- Stroke illuminated push buttons shall be provided.(ah) All landing door shall be one hour fire rated.(aj) Car door lock shall be provided.(ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided.(al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finishedstainless steel (1.5mm) panel to be provided on all side above hand rails.(am) MS Pit Ladder shall be provided.(an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline).(ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. 207 (ar) Hall fixtures face plate : Stainless steel (Hairline).(as) Hall button arrangement :Hall button with FPI.(at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Firemans service. Emergency car light unit,Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised withcar door opening/closing system.(au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where requiredshall be provided by the contractor(av) Ventilation : High powered axial flow fan with suitable air throw of 600 CFM through a duct all around the car so that uniform air flow shall be available at all side of the car. 208 Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift withsingle speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+10 upper floors with ACVariable Voltage Variable Frequency (VVVF) Regenerative (Cosed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the carto announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator, announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 13 passenger as per the details given belowcomplete all as specified and directed:-(Location of lift :P197-1BMC, P198-1 BMC) 209 (a) Type & capacity: 13 Passenger, 884 Kgs - Gearless (b) Speed:1.5 M/Sec (c) Type of Drive:VVVF Regenerative (Closed Loop)(d) Type of control :Microprocessor based Simplex full Collective control (e) Location of Machine Room:Top of Building (As existing) (f)Machine : Gearless Machine(g) Travel :As per existing site to serve G+10 floor (h) Serving :G+ 10 upper floors- (11 Stops, 11 landings, 11 openings) (j)Existing Well size:As existing at site (as per Appx `A attached) 210 (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665. 211 (l) Head Room : As per existing site. (m) Power supply :415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule.(p)Car Enclosure :Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code.(q)Car Size : As per NBC 2016 or other relevant BIS code of latest edition..(r) Flooring:18-20mm thick granite flooring. (s) No of Entrance :One location - Front. 212 (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(v) Clear opening for door : As per existing site.(w) Floor Designation : 0,1,2,3,4,5,6,7,8,9,10(x)Indicators : Car & Landings: Direction & Position Indicator/ call registration LEDs(y)Roping : Lift rope shall be provided as perNBC-2016 andIS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square andfactor of safety shall be 8.6(z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided.(ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad)Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be providedfor elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure. 213 (ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided.(af)Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag)Micro- Stroke illuminated push buttons shall be provided.(ah) All landing door shall be one hour fire rated.(aj) Car door lock shall be provided.(ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided.(al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finishedstainless steel (1.5mm) panel to be provided on all side above hand rails.(am) MS Pit Ladder shall be provided.(an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline).(ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. 214 (ar) Hall fixtures face plate : Stainless steel (Hairline).(as) Hall button arrangement :Hall button with FPI.(at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Firemans service. Emergency car light unit,Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised withcar door opening/closing system.(au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where requiredshall be provided by the contractor(av) Ventilation : High powered axial flow fan with suitable air throw of 600 CFM through a duct all around the car so that uniform air flow shall be available at all side of the car. 215 Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift withsingle speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+10 upper floors with ACVariable Voltage Variable Frequency (VVVF) Regenerative (Cosed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the carto announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator, announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 8 passenger as per the details given belowcomplete all as specified and directed:-(Location of lift :P197-2 BMC, P198-2 BMC, MAP A-1 VD, MAP B-1 VD) 216 (a) Type & capacity: 8 Passenger, 544 Kgs - Gearless (b) Speed:1.5 M/Sec (c) Type of Drive:VVVF Regenerative (Closed Loop)(d) Type of control :Microprocessor based Simplex full Collective control (e) Location of Machine Room:Top of Building (As existing) (f)Machine : Gearless Machine(g) Travel :As per existing site to serve G+10 floor (h) Serving :G+ 10 upper floors- (11 Stops, 11 landings, 11 openings) (j)Existing Well size:As existing at site (as per Appx `A attached) 217 (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665. 218 (l) Head Room : As per existing site. (m) Power supply :415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule.(p)Car Enclosure :Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code.(q)Car Size : As per NBC 2016 or other relevant BIS code of latest edition..(r) Flooring:18-20mm thick granite flooring. (s) No of Entrance :One location - Front. 219 (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(v) Clear opening for door : As per existing site.(w) Floor Designation : 0,1,2,3,4,5,6,7,8,9,10(x)Indicators : Car & Landings: Direction & Position Indicator/ call registration LEDs(y)Roping : Lift rope shall be provided as perNBC-2016 andIS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square andfactor of safety shall be 8.6(z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided.(ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad)Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be providedfor elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure. 220 (ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided.(af)Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag)Micro- Stroke illuminated push buttons shall be provided.(ah) All landing door shall be one hour fire rated.(aj) Car door lock shall be provided.(ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided.(al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finishedstainless steel (1.5mm) panel to be provided on all side above hand rails.(am) MS Pit Ladder shall be provided.(an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline).(ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. 221 (ar) Hall fixtures face plate : Stainless steel (Hairline).(as) Hall button arrangement :Hall button with FPI.(at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Firemans service. Emergency car light unit,Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised withcar door opening/closing system.(au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where requiredshall be provided by the contractor(av) Ventilation : High powered axial flow fan with suitable air throw of 600 CFM through a duct all around the car so that uniform air flow shall be available at all side of the car. 222 Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift withsingle speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+10 upper floors with ACVariable Voltage Variable Frequency (VVVF) Regenerative (Cosed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the carto announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator, announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 6 passenger as per the details given belowcomplete all as specified and directed:-(Location of lift :TV18 ALIPORE) 223 (a) Type & capacity: 6 Passenger, 408 Kgs - Gearless (b) Speed:1.5 M/Sec (c) Type of Drive:VVVF Regenerative (Closed Loop)(d) Type of control :Microprocessor based Simplex full Collective control (e) Location of Machine Room:Top of Building (As existing) (f)Machine : Gearless Machine(g) Travel :As per existing site to serve G+10 floor (h) Serving :G+ 10 upper floors- (11 Stops, 11 landings, 11 openings) (j)Existing Well size:As existing at site (as per Appx `A attached) 224 (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665. 225 (l) Head Room : As per existing site. (m) Power supply :415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule.(p)Car Enclosure :Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code.(q)Car Size : As per NBC 2016 or other relevant BIS code of latest edition..(r) Flooring:18-20mm thick granite flooring. (s) No of Entrance :One location - Front. 226 (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(v) Clear opening for door : As per existing site.(w) Floor Designation : 0,1,2,3,4,5,6,7,8,9,10(x)Indicators : Car & Landings: Direction & Position Indicator/ call registration LEDs(y)Roping : Lift rope shall be provided as perNBC-2016 andIS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square andfactor of safety shall be 8.6(z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided.(ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad)Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be providedfor elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure. 227 (ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided.(af)Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag)Micro- Stroke illuminated push buttons shall be provided.(ah) All landing door shall be one hour fire rated.(aj) Car door lock shall be provided.(ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided.(al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finishedstainless steel (1.5mm) panel to be provided on all side above hand rails.(am) MS Pit Ladder shall be provided.(an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline).(ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. 228 (ar) Hall fixtures face plate : Stainless steel (Hairline).(as) Hall button arrangement :Hall button with FPI.(at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Firemans service. Emergency car light unit,Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised withcar door opening/closing system.(au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where requiredshall be provided by the contractor(av) Ventilation : High powered axial flow fan with suitable air throw of 600 CFM through a duct all around the car so that uniform air flow shall be available at all side of the car. 229 Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift withsingle speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+9 upper floors with ACVariable Voltage Variable Frequency (VVVF) Regenerative (Cosed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the carto announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator, announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 8 passenger as per the details given belowcomplete all as specified and directed:-(Location of lift :JSA ENCLAVE BLOCK1 AND BLOCK 2- 02 NOS) 230 (a) Type & capacity: 8 Passenger, 544 Kgs - Gearless (b) Speed:1.5 M/Sec (c) Type of Drive:VVVF Regenerative (Closed Loop)(d) Type of control :Microprocessor based Simplex full Collective control (e) Location of Machine Room:Top of Building (As existing) (f)Machine : Gearless Machine(g) Travel :As per existing site to serve G+9 floor (h) Serving :G+ 9 upper floors- (10 Stops, 10 landings, 10 openings) (j)Existing Well size:As existing at site (as per Appx `A attached) 231 (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665. 232 (l) Head Room : As per existing site. (m) Power supply :415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule.(p)Car Enclosure :Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code.(q)Car Size : As per NBC 2016 or other relevant BIS code of latest edition..(r) Flooring:18-20mm thick granite flooring. (s) No of Entrance :One location - Front. 233 (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(v) Clear opening for door : As per existing site.(w) Floor Designation : 0,1,2,3,4,5,6,7,8,9(x)Indicators : Car & Landings: Direction & Position Indicator/ call registration LEDs(y)Roping : Lift rope shall be provided as perNBC-2016 andIS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square andfactor of safety shall be 8.6(z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided.(ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad)Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be providedfor elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure. 234 (ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided.(af)Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag)Micro- Stroke illuminated push buttons shall be provided.(ah) All landing door shall be one hour fire rated.(aj) Car door lock shall be provided.(ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided.(al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finishedstainless steel (1.5mm) panel to be provided on all side above hand rails.(am) MS Pit Ladder shall be provided.(an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline).(ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. 235 (ar) Hall fixtures face plate : Stainless steel (Hairline).(as) Hall button arrangement :Hall button with FPI.(at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Firemans service. Emergency car light unit,Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised withcar door opening/closing system.(au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where requiredshall be provided by the contractor(av) Ventilation : High powered axial flow fan with suitable air throw of 600 CFM through a duct all around the car so that uniform air flow shall be available at all side of the car. 236 Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift withsingle speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+7 upper floors with ACVariable Voltage Variable Frequency (VVVF) Regenerative (Cosed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the carto announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator, announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 8 passenger as per the details given belowcomplete all as specified and directed:-(Location of lift :P173 BMC-01) 237 (a) Type & capacity: 8 Passenger, 544 Kgs - Gearless (b) Speed:1.5 M/Sec (c) Type of Drive:VVVF Regenerative (Closed Loop)(d) Type of control :Microprocessor based Simplex full Collective control (e) Location of Machine Room:Top of Building (As existing) (f)Machine : Gearless Machine(g) Travel :As per existing site to serve G+7 floor (h) Serving :G+ 7 upper floors- (8 Stops, 8 landings, 8 openings) (j)Existing Well size:As existing at site (as per Appx `A attached) 238 (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665. 239 (l) Head Room : As per existing site. (m) Power supply :415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule.(p)Car Enclosure :Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code.(q)Car Size : As per NBC 2016 or other relevant BIS code of latest edition..(r) Flooring:18-20mm thick granite flooring. (s) No of Entrance :One location - Front. 240 (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(v) Clear opening for door : As per existing site.(w) Floor Designation : 0,1,2,3,4,5,6,7(x)Indicators : Car & Landings: Direction & Position Indicator/ call registration LEDs(y)Roping : Lift rope shall be provided as perNBC-2016 andIS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square andfactor of safety shall be 8.6(z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided.(ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad)Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be providedfor elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure. 241 (ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided.(af)Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag)Micro- Stroke illuminated push buttons shall be provided.(ah) All landing door shall be one hour fire rated.(aj) Car door lock shall be provided.(ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided.(al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finishedstainless steel (1.5mm) panel to be provided on all side above hand rails.(am) MS Pit Ladder shall be provided.(an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline).(ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. 242 (ar) Hall fixtures face plate : Stainless steel (Hairline).(as) Hall button arrangement :Hall button with FPI.(at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Firemans service. Emergency car light unit,Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised withcar door opening/closing system.(au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where requiredshall be provided by the contractor(av) Ventilation : High powered axial flow fan with suitable air throw of 600 CFM through a duct all around the car so that uniform air flow shall be available at all side of the car. 243 Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift withsingle speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+6 upper floors with ACVariable Voltage Variable Frequency (VVVF) Regenerative (Cosed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the carto announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator, announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 13 passenger as per the details given belowcomplete all as specified and directed:-(Location of lift :P127 BMC-01) 244 (a) Type & capacity: 13 Passenger, 884 Kgs - Gearless (b) Speed:1.5 M/Sec (c) Type of Drive:VVVF Regenerative (Closed Loop)(d) Type of control :Microprocessor based Simplex full Collective control (e) Location of Machine Room:Top of Building (As existing) (f)Machine : Gearless Machine(g) Travel :As per existing site to serve G+6 floor (h) Serving :G+ 6 upper floors- (7 Stops, 7 landings, 7 openings) (j)Existing Well size:As existing at site (as per Appx `A attached) 245 (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665. 246 (l) Head Room : As per existing site. (m) Power supply :415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule.(p)Car Enclosure :Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code.(q)Car Size : As per NBC 2016 or other relevant BIS code of latest edition..(r) Flooring:18-20mm thick granite flooring. (s) No of Entrance :One location - Front. 247 (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(v) Clear opening for door : As per existing site.(w) Floor Designation : 0,1,2,3,4,5,6(x)Indicators : Car & Landings: Direction & Position Indicator/ call registration LEDs(y)Roping : Lift rope shall be provided as perNBC-2016 andIS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square andfactor of safety shall be 8.6(z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided.(ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad)Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be providedfor elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure. 248 (ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided.(af)Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag)Micro- Stroke illuminated push buttons shall be provided.(ah) All landing door shall be one hour fire rated.(aj) Car door lock shall be provided.(ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided.(al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finishedstainless steel (1.5mm) panel to be provided on all side above hand rails.(am) MS Pit Ladder shall be provided.(an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline).(ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. 249 (ar) Hall fixtures face plate : Stainless steel (Hairline).(as) Hall button arrangement :Hall button with FPI.(at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Firemans service. Emergency car light unit,Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised withcar door opening/closing system.(au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where requiredshall be provided by the contractor(av) Ventilation : High powered axial flow fan with suitable air throw of 600 CFM through a duct all around the car so that uniform air flow shall be available at all side of the car. 250 Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift withsingle speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+6 upper floors with ACVariable Voltage Variable Frequency (VVVF) Regenerative (Cosed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the carto announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator, announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 8 passenger as per the details given belowcomplete all as specified and directed:-(Location of lift :MAPC VD-01, TV15 ALIPORE -01) 251 (a) Type & capacity: 8 Passenger, 544 Kgs - Gearless (b) Speed:1.5 M/Sec (c) Type of Drive:VVVF Regenerative (Closed Loop)(d) Type of control :Microprocessor based Simplex full Collective control (e) Location of Machine Room:Top of Building (As existing) (f)Machine : Gearless Machine(g) Travel :As per existing site to serve G+6 floor (h) Serving :G+ 6 upper floors- (7 Stops, 7 landings, 7 openings) (j)Existing Well size:As existing at site (as per Appx `A attached) 252 (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665. 253 (l) Head Room : As per existing site. (m) Power supply :415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule.(p)Car Enclosure :Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code.(q)Car Size : As per NBC 2016 or other relevant BIS code of latest edition..(r) Flooring:18-20mm thick granite flooring. (s) No of Entrance :One location - Front. 254 (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(v) Clear opening for door : As per existing site.(w) Floor Designation : 0,1,2,3,4,5,6(x)Indicators : Car & Landings: Direction & Position Indicator/ call registration LEDs(y)Roping : Lift rope shall be provided as perNBC-2016 andIS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square andfactor of safety shall be 8.6(z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided.(ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad)Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be providedfor elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure. 255 (ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided.(af)Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag)Micro- Stroke illuminated push buttons shall be provided.(ah) All landing door shall be one hour fire rated.(aj) Car door lock shall be provided.(ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided.(al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finishedstainless steel (1.5mm) panel to be provided on all side above hand rails.(am) MS Pit Ladder shall be provided.(an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline).(ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. 256 (ar) Hall fixtures face plate : Stainless steel (Hairline).(as) Hall button arrangement :Hall button with FPI.(at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Firemans service. Emergency car light unit,Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised withcar door opening/closing system.(au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where requiredshall be provided by the contractor(av) Ventilation : High powered axial flow fan with suitable air throw of 600 CFM through a duct all around the car so that uniform air flow shall be available at all side of the car. 257 Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift withsingle speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+5 upper floors with ACVariable Voltage Variable Frequency (VVVF) Regenerative (Cosed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the carto announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator, announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 8 passenger as per the details given belowcomplete all as specified and directed:-(Location of lift :P/1 VD-03 NOS) 258 (a) Type & capacity: 8 Passenger, 544 Kgs - Gearless (b) Speed:1.5 M/Sec (c) Type of Drive:VVVF Regenerative (Closed Loop)(d) Type of control :Microprocessor based Simplex full Collective control (e) Location of Machine Room:Top of Building (As existing) (f)Machine : Gearless Machine(g) Travel :As per existing site to serve G+5 floor (h) Serving :G+ 5 upper floors- (6 Stops, 6 landings, 6 openings) (j)Existing Well size:As existing at site (as per Appx `A attached) 259 (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665. 260 (l) Head Room : As per existing site. (m) Power supply :415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule.(p)Car Enclosure :Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code.(q)Car Size : As per NBC 2016 or other relevant BIS code of latest edition..(r) Flooring:18-20mm thick granite flooring. (s) No of Entrance :One location - Front. 261 (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(v) Clear opening for door : As per existing site.(w) Floor Designation : 0,1,2,3,4,5(x)Indicators : Car & Landings: Direction & Position Indicator/ call registration LEDs(y)Roping : Lift rope shall be provided as perNBC-2016 andIS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square andfactor of safety shall be 8.6(z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided.(ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad)Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be providedfor elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure. 262 (ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided.(af)Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag)Micro- Stroke illuminated push buttons shall be provided.(ah) All landing door shall be one hour fire rated.(aj) Car door lock shall be provided.(ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided.(al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finishedstainless steel (1.5mm) panel to be provided on all side above hand rails.(am) MS Pit Ladder shall be provided.(an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline).(ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. 263 (ar) Hall fixtures face plate : Stainless steel (Hairline).(as) Hall button arrangement :Hall button with FPI.(at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Firemans service. Emergency car light unit,Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised withcar door opening/closing system.(au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where requiredshall be provided by the contractor(av) Ventilation : High powered axial flow fan with suitable air throw of 600 CFM through a duct all around the car so that uniform air flow shall be available at all side of the car. 264 Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift withsingle speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+4 upper floors with ACVariable Voltage Variable Frequency (VVVF) Regenerative (Cosed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the carto announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator, announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 6 passenger as per the details given belowcomplete all as specified and directed:-(Location of lift :O32 IGS- 01) 265 (a) Type & capacity: 6 Passenger, 408 Kgs - Gearless (b) Speed:1.5 M/Sec (c) Type of Drive:VVVF Regenerative (Closed Loop)(d) Type of control :Microprocessor based Simplex full Collective control (e) Location of Machine Room:Top of Building (As existing) (f)Machine : Gearless Machine(g) Travel :As per existing site to serve G+4 floor (h) Serving :G+ 4 upper floors- (5 Stops, 5 landings, 5 openings) (j)Existing Well size:As existing at site (as per Appx `A attached) 266 (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665. 267 (l) Head Room : As per existing site. (m) Power supply :415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule.(p)Car Enclosure :Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code.(q)Car Size : As per NBC 2016 or other relevant BIS code of latest edition..(r) Flooring:18-20mm thick granite flooring. (s) No of Entrance :One location - Front. 268 (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(v) Clear opening for door : As per existing site.(w) Floor Designation : 0,1,2,3,4(x)Indicators : Car & Landings: Direction & Position Indicator/ call registration LEDs(y)Roping : Lift rope shall be provided as perNBC-2016 andIS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square andfactor of safety shall be 8.6(z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided.(ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad)Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be providedfor elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure. 269 (ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided.(af)Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag)Micro- Stroke illuminated push buttons shall be provided.(ah) All landing door shall be one hour fire rated.(aj) Car door lock shall be provided.(ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided.(al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finishedstainless steel (1.5mm) panel to be provided on all side above hand rails.(am) MS Pit Ladder shall be provided.(an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline).(ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. 270 (ar) Hall fixtures face plate : Stainless steel (Hairline).(as) Hall button arrangement :Hall button with FPI.(at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Firemans service. Emergency car light unit,Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised withcar door opening/closing system.(au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where requiredshall be provided by the contractor(av) Ventilation : High powered axial flow fan with suitable air throw of 600 CFM through a duct all around the car so that uniform air flow shall be available at all side of the car. 271 Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift withsingle speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+5 upper floors with ACVariable Voltage Variable Frequency (VVVF) Regenerative (Cosed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the carto announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator, announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 6 passenger as per the details given belowcomplete all as specified and directed:-(Location of lift :TV13 ALIPORE-01, TV14 ALIPORE-01) 272 (a) Type & capacity: 6 Passenger, 408 Kgs - Gearless (b) Speed:1.5 M/Sec (c) Type of Drive:VVVF Regenerative (Closed Loop)(d) Type of control :Microprocessor based Simplex full Collective control (e) Location of Machine Room:Top of Building (As existing) (f)Machine : Gearless Machine(g) Travel :As per existing site to serve G+5 floor (h) Serving :G+ 5 upper floors- (6 Stops, 6 landings, 6 openings) (j)Existing Well size:As existing at site (as per Appx `A attached) 273 (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665. 274 (l) Head Room : As per existing site. (m) Power supply :415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule.(p)Car Enclosure :Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code.(q)Car Size : As per NBC 2016 or other relevant BIS code of latest edition..(r) Flooring:18-20mm thick granite flooring. (s) No of Entrance :One location - Front. 275 (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(v) Clear opening for door : As per existing site.(w) Floor Designation : 0,1,2,3,4, 5(x)Indicators : Car & Landings: Direction & Position Indicator/ call registration LEDs(y)Roping : Lift rope shall be provided as perNBC-2016 andIS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square andfactor of safety shall be 8.6(z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided.(ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad)Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be providedfor elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure. 276 (ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided.(af)Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag)Micro- Stroke illuminated push buttons shall be provided.(ah) All landing door shall be one hour fire rated.(aj) Car door lock shall be provided.(ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided.(al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finishedstainless steel (1.5mm) panel to be provided on all side above hand rails.(am) MS Pit Ladder shall be provided.(an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline).(ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. 277 (ar) Hall fixtures face plate : Stainless steel (Hairline).(as) Hall button arrangement :Hall button with FPI.(at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Firemans service. Emergency car light unit,Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised withcar door opening/closing system.(au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where requiredshall be provided by the contractor(av) Ventilation : High powered axial flow fan with suitable air throw of 600 CFM through a duct all around the car so that uniform air flow shall be available at all side of the car. 278 Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift withsingle speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+2 upper floors with ACVariable Voltage Variable Frequency (VVVF) Regenerative (Cosed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the carto announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator, announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 8 passenger as per the details given belowcomplete all as specified and directed:-(Location of lift :MES IB VD-01) 279 (a) Type & capacity: 8 Passenger, 544 Kgs - Gearless (b) Speed:1.5 M/Sec (c) Type of Drive:VVVF Regenerative (Closed Loop)(d) Type of control :Microprocessor based Simplex full Collective control (e) Location of Machine Room:Top of Building (As existing) (f)Machine : Gearless Machine(g) Travel :As per existing site to serve G+2 floor (h) Serving :G+ 2 upper floors- (3 Stops, 3 landings, 3 openings) (j)Existing Well size:As existing at site (as per Appx `A attached) 280 (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665. 281 (l) Head Room : As per existing site. (m) Power supply :415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule.(p)Car Enclosure :Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code.(q)Car Size : As per NBC 2016 or other relevant BIS code of latest edition..(r) Flooring:18-20mm thick granite flooring. (s) No of Entrance :One location - Front. 282 (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finishDoor.(v) Clear opening for door : As per existing site.(w) Floor Designation : 0,1,2(x)Indicators : Car & Landings: Direction & Position Indicator/ call registration LEDs(y)Roping : Lift rope shall be provided as perNBC-2016 andIS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square andfactor of safety shall be 8.6(z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided.(ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad)Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be providedfor elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure. 283 (ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided.(af)Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag)Micro- Stroke illuminated push buttons shall be provided.(ah) All landing door shall be one hour fire rated.(aj) Car door lock shall be provided.(ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided.(al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finishedstainless steel (1.5mm) panel to be provided on all side above hand rails.(am) MS Pit Ladder shall be provided.(an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline).(ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. 284 (ar) Hall fixtures face plate : Stainless steel (Hairline).(as) Hall button arrangement :Hall button with FPI.(at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Firemans service. Emergency car light unit,Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised withcar door opening/closing system.(au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where requiredshall be provided by the contractor(av) Ventilation : High powered axial flow fan with suitable air throw of 600 CFM through a duct all around the car so that uniform air flow shall be available at all side of the car. 285 Materials and labour for earthing as in repair complete with galvanised iron earth plate electrode 600 mm x600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtrdeep below ground level with top edge of the plate notless than 1.5 m below ground level connetced withgalvanised strip of size 25 x 4mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed by the Engr-in-Charge. 286 Supply and fixing in repair for earth continuity conductor or main earthing lead fixed to wall onporcelain insulator or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for wall/ roof etc. as required by 25X4mm galvanised iron strip complete all as specified and directed. 287 Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 25 Sqmm 3.5 core in trench/duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge. 288 Supply and fixingMCB TPN DB made up with sheet metal double door, phosphorised, power coated, neutral link, earth bar and din rail, 4 way TPN with 200 amps rated bus bar, 415 volts complete all as specified and as directed. 289 Supply and fixing isolator 40 Amps 415 Volts FP with rapturing capacity 10KAincluding taking down of old one complete all as specified. 290 Supply and fixingMCB 5 to 32 amps single polecomplete all as specified. 291 Supply and fixing MCB DP 40 to 63 amps 240 volts 10KA breaking capacitycomplete all as specified.
Contract Date: Nov 28, 2025 Contract Value : 5.86 Crore
Statutory Bodies & Commissions/Committees No of Bidders 8
West Bengal View Result →
16.
Public Administrative Department #8289978 AOC
Tender For Up-Gradation Of Safety Works At Dr. R.N Cooper Hospital, Vile Parle (W), Mumbai.- Supply, Installation , Testing & Commissioning of IP Dome CameraImage Sensor: 1/2.8’’ Progressive Scan CMOS | Minimum Illumination: 0.01Lux @(F1.2, AGC ON), 0.012 Lux ), 0 Lux with IR | Shutter Speed: 1/3 s ~ 1/100,000 s | Slow Shutter: Support | Lens: 2.8 - 12 mm ± 2mm @ F1.2, motorized lens (-Z), angle of view: 106°~35° | Day & Night: IR cut filter with auto switch | WDR: 120dB | Video Compression: H.264 / MJPEG / H.264+ | H.264 Type: Main Profile | Video Bitrate: 32 Kbps – 16 Mbps | Audio (-S): G.711 / G.722.1 / G.726 / MP2L2 (64Kbps, 16Kbps, 16Kbps, 32-128Kbps respectively) | Minimum Resolution: 1920 × 1080 | Max Frame Rate: Main stream: 25fps (1920×1080, 1280×960, 1280×720) Sub stream: 25fps (352×288, 640×360) | Image Settings: Rotate Mode, Saturation, Brightness, Contrast, Sharpness (adjustable via software/browser) | Day/Night Switch: Auto / Schedule / Triggered by Alarm In | Alarm Trigger: Tampering, Network disconnect, IP conflict, Storage exception | Network Protocols: TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6 | General Functions: One-key reset, Anti-flicker, Heartbeat, Mirror, Password Protection, Privacy Mask, Watermark, IP Filter, Anonymous Access | Compliance Standard: ONVIF (PROFILE S, PROFILE G) | Interface: 1 RJ45 10M/100M Ethernet, 1Vp-p Composite Output (75 Ω / BNC) | Operating Conditions: -30°C to 60°C (-22°F to 140°F), Humidity ≤ 95% (non-condensing) | Power Supply: 12V DC ±25%, PoE (802.3af, Class 3), Max. 5.5W | Ingress Protection: IP67, IK10 | IR Range: 30 meters or Above | Certification: STQC NDAA /U L/GDPR /NIST /TPM /ISO 27032 /Indian Govt OEM Make: Pelco / Vicon / Hanwha / Axis / Bosch 2 Supply, Installation , Testing & Commissioning of IP Bullet CameraImage Sensor: 1/2.8’’ Progressive Scan CMOS | Minimum Illumination: 0.01Lux @(F1.2, AGC ON), 0.012 Lux @(F1.2, AGC ON), 0 Lux with IR | Shutter Speed: 1/3 s ~ 1/100,000 s | Slow Shutter: Support | Lens: 2.8 - 12 mm ± 2mm @ F1.4, motorized lens (-Z), angle of view: 106°~35° | Day & Night: IR cut filter with auto switch | WDR: 120dB | Video Compression: H.264 / MJPEG / H.264+ | H.264 Type: Main Profile | Video Bitrate: 32 Kbps – 16 Mbps | Audio (-S): G.711 / G.722.1 / G.726 / MP2L2 (64Kbps, 16Kbps, 16Kbps, 32-128Kbps respectively) | Minimum Resolution: 1920 × 1080 | Max Frame Rate: Main stream: 25fps (1920×1080, 1280×960, 1280×720) Sub stream: 25fps (352×288, 640×360) | Image Settings: Rotate Mode, Saturation, Brightness, Contrast, Sharpness (adjustable via software/browser) | Day/Night Switch: Auto / Schedule / Triggered by Alarm In | Alarm Trigger: Tampering, Network disconnect, IP conflict, Storage exception | Network Protocols: TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6 | General Functions: One-key reset, Anti-flicker, Heartbeat, Mirror, Password Protection, Privacy Mask, Watermark, IP Filter, Anonymous Access | Compliance Standard: ONVIF (PROFILE S, PROFILE G) | Interface: 1 RJ45 10M/100M Ethernet, 1Vp-p Composite Output (75 Ω / BNC) | Operating Conditions: -30°C to 60°C (-22°F to 140°F), Humidity ≤ 95% (non-condensing) | Power Supply: 12V DC ±25%, PoE (802.3af, Class 3), Max. 5.5W | Ingress Protection: IP67, IK10 | IR Range: 30 meters or Above | Certification: STQC NDAA /U L/GDPR /NIST /TPM /ISO 27032 /Indian Govt OEM Make: Pelco / Vicon / Hanwha / Axis / Bosch 3 Supply, Installation,Testing& Commissioning of IP PTZ cameraParameter Specification: Image Sensor – 1/2.8 CMOS; Effective Pixels – 1920(H) x 1080(V), 2 Megapixels Minimum; S/N Ratio – More than 55dB; Minimum Illumination – Colour: 0.05Lux @ F1.6; 0Lux @ F1.6 (IR on); Focal Length – 32x Optical Zoom, 16x Digital Zoom; White Balance – Auto, ATW, Indoor, Outdoor, Manual; Focus Control – Auto / Manual; AGC Control – Auto / Manual; Back Light Compensation – BLC / HLC / WDR (120dB); Pan Travel – 0°360° endless; Pan Speed – 0.1° ~ 300°/sec; Tilt Travel – -15° ~ 90° auto flip 180°; Tilt Speed – 0.1° ~ 200°/sec; Manual Speed – Pan: 0.1° ~ 300°/s; Tilt: 0.1° ~ 200°/s; Presets – 300; Day/Night IR Cut Filter – Auto (ICR) / Color / B/W; Video Compression – H.265 / H.264 / MJPEG; Video Streaming – Main stream: 1080P/720P/1.3M (125/30fps); Sub stream2: 1080P/1.3M/720P/D1/CIF (1~25/30fps); Networking – RJ-45 (10/100Base-T); Protocols – IPv4/IPv6, HTTP, HTTPS, SSL, TCP/IP, UDP, UPnP, ICMP, IGMP, SNMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, PPPOE, DDNS, FTP, IP Filter, QoS, 802.1x, ONVIF, PSIA, CGI; Alarm – 2 In / 1 Out; Operating Temperature – -40ºC ~ 70ºC; Weatherproof Standard – IP66; Power Source – AC 24V / 3A (±10%), PoE+ (802.3at); Power Consumption – 13W (normal), 23W (IR on); Memory – Up to 128GB; Certification – STQC/NDAA/UL/GDPR/NIST/TPM/ISO 27032/Indian Govt; OEM Make – Pelco /Vicon/Hanwha/Axis/Bosch. 4 Fibre Optic Cable 5 SITC of 8TB Storage (HDD) 6 Supply, Installation, Testing & Commissioning 42 U Rack with Require IPDU and Rack mount KVM Switch with 17 Integrated Display 7 SITC of 19 inch Rack 8 Light Interface Unit (LIU) 9 SC connector per core 10 SITC of Sc-SC Duplex fibre patch cord SM 9/125 - 3mtr 11 Supply of CAT-6 cable for CCTV application armoured 12 Installation of CAT-6 cable 13 SITC of 24 Port CAT-6 UTP Jack panel with cable manager 14 3 Feet Patch Chord 15 Supply, Installation, Testing & commissioning of 42inches LED monitor, Full HD Resolution, Backlight LED, Brightness : 400 NITS min., Contrast : 1200 : 1 or better., Power supply : 230 ±10%, 50 Hz. 16 24 Port +4 10G SFP+ Fibre Optic Switch POE Switch 17 Supply, Installation, Testing & Commissioning of 24 Port 1G switch 18 SITC of Single Mode 1G SFP - 10KM Module with installation 19 Supply, intsallation of Operator terminal Intel Processor based PC with i7 processor, 1TB HDD, 16GB RAM, 20.5 inch LED Monitor, 4 GB graphic card with NVIDA facility, with the Licencse copy of operating System, Microsoft office. With 256 GB SSD 20 Server for CCTV HP ProLiant DL380p Gen8 (1) Intel® Xeon® E5-2643 (3.3GHz/ 4-core/10MB/8 GT-s QPI/130 W) Processor/ 10MB (1x10MB) Level 3/ 16 GB RAM PC3L-10600R (DDR3-1333) Registered DIMMS/HP Smart Array P420i/ZM (RAID 0/1/1+0)/ 8 SFF SAS/SATA HDD Bays; includes 6 SFF hard drive blanks/(1) HP 460W Common Slot Gold Hot Plug Power Supply (92% Efficient)/ 3 Years 24x7 Onsite WarrantyServer for CCTV HP ProLiant DL380p Gen8 (1) Intel® Xeon® E5-2643 (3.3GHz/ 21 Splicing of OFC Cable (Per pair) 22 UPS: Supply, Installation, testing, commissioning, performance demonstration of 2 KVA UPS true online with 1 phase input, 1 phase output with back up batteries for 2 Hours backup along with rack & connectors. 23 Supply & Laying of double wall corrugated ( DWC) pipe 50 mm OD / 38 mm I.D. 24 Excavating the trenches and refilling,reinstatement of the same after the cable is laid in approved manner (750 mm deep, 600 mm wide),in all types of soils 1 Cu. Mtr. = 2.2 RMT. 25 Excavating the trenches and refilling the same after the cable is laid in approved manner (Size of trench: 750 mm deep, 600 mm wide) in concrete/ masonary / asphalt. 1 Cu. Mtr. = 2.2 RMT. And reinstatement. 26 2 inch C Class GI Pipe 27 Providing & erecting 4 m high (clear height)galvanized OCTAGONAL pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification 28 Single arm bracket 29 1st category Cu armoured cables FRLS outer sheathed- 4C x 2.5 Sq.mm 30 IP 42 Wall/column Mounted distribution board with one Nos of DP 16/32A MCB as incomer and 2 Noss 6A/10A SP MCB as outgoing (8 way SPN DB) 31 Supply of VMS software camera License for ENTERPRISE Master server system (Network-Optix/Vicon/Hanwha) 32 VMS Maintenance and support services per year 33 Clean Agent Fire Extinguisher 34 SITC of 4K AI based Surveillance Camera. 35 CSMC for 1st year after completing 1 year DLP 36 CSMC for 2ndyear 37 CSMC for 3rdyear 38 CSMC for 4thyear
Contract Date: Nov 19, 2025 Contract Value : 2.05 Crore
Local Bodies No of Bidders 3
Maharashtra View Result →
17.
Defence #8121023 AOC
Bids Are Invited For Repair and Overhauling Service 1 1. 1.Complete servicing, washing to veh with pressure pump water and cleaning agents including greasing all nipples etc. complete and testing and replacement of the following (a) Engine oil: 11 Ltrs (b) Coolant: 02 Ltrs. (c) Fuel filters: 01 set. (d) Engine oil filter: 01 Set. (e) Air Filter-01 Nos (f) Protect Filter - 01 Nos (g) Filter Element - 01 Nos (h) Cleaning of Tank complete. (1) Replacement od seat cover. (j) Repair/ Replacement of Front door lock. (j) Checking and top up of break fluid, Steering fluid, gear box oil, rear axle oil as required to max. level. 2.Repair/ Replacement of defective electrical system (a) Replacement of head lamps, instrument lamps and tail lamps as required (b) Replacement of UNSV horn. (c) Repair/Replacement of head and tail side indicator etc. (d) Repair/ Replacement to roof light etc. (e) Replacement of damaged cables of electric system as required complete. (f) Supply and fixing of Steering lock cum ignition switch. 3.Dismantling of alternator assembly, cleaning of stator and rotor parts. 4. Denting, Painting and Welding of Dented Part on vehicle. 5. Supply and Fixing of Grad Hand Control valve of hand brake. 6.Repair/ Replacement of defective clutch system (a) Replacement of Clutch disc of reqd Size. (b) replacement of Assy Clutch release bearing. (c) replacement of Clutch master Cylinder. (b) Check and adjust clutch padel for smooth travel and linkage. all parts replacement with new spares and fixing the same to its original position all as directed
Contract Date: Ref. Documents Contract Value : 68,000
Statutory Bodies & Commissions/Committees No of Bidders 4
18.
Public Administrative Department #8034303 AOC
Construction And Development Of Working Women Hostel At Kanchanwadi Chhatrapati Sambhajinagar- 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) 2 Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means 3 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means 4 Excavation for foundation in Hard-rock by blasting including trimming and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (Lift from 1.5m To 3.0 m) By Mechanical Means 5 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steelcentering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 6 Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per One Square Metre of vertical surface area covering 10 years guarantee on bond paper. 7 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete 8 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) 9 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. 10 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 11 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 12 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 13 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 14 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 15 Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 16 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 17 Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15 cmto 20 cm including watering and compaction etc.complete. 18 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. 19 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints,watering and scaffolding etc. Complete 20 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. 21 Providing and fixing precast R.C.C. frames of door/windows/ ventilators of c/s 125mm X 50mm with 2 bars of 8mm dia. Of steel as r/f . In half brick wall 22 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. 23 Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. 24 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) 25 Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box. 26 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc 27 Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete 28 Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. 29 Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. 30 Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. 31 Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 32 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or a directed etc. complete. 33 Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete 34 Providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. supply pipe including necessary bend and socket complete 35 Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity above 1000 to 20,000 litres 36 Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use) 37 Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. 38 Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete 39 Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. 40 Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. 41 Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete 42 Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. 43 Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete 44 Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. 45 Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. 46 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75Kilogramwith lid and frame fixed in cement concrete 47 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (MJP-SSR- 2023-24, Bd A1/259) 48 Lift 0 to 1.5 M Cum 140.00 140.00 Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (MJP-SSR- 2023-24, Bd-A-2/259) 49 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (MJP-SSR- 2023-24, Bd-A-4/259) 50 Providing ISI standard stoneware pipes including all taxes inspectin charges, railway freight, unloading, transoport, stacking,complete.150mm dia. SWG pipe 51 Louvering and jointing in proper grade, alignment standard stoneware pipes with cement joint 1:6 C.M. proportion including unloading, transoport, stacking, necessary excavation and jointing complete. 150mm dia. SWG pipe 52 Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete 53 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. (SSR.Item no. 35.21) 54 Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.) 55 Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. 56 Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. 57 Transportation of surplus material from work site to any disposal place as directed by Er.incharge eith a lead of 5km including and stacking completed. 58 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. 59 Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete. 60 Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi- strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surfaceand nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated,Hex head, self-drilling screw etc. complete. (weight of profile 61 Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 year guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete 62 Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anticorrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish 63 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. 64 Providing, applying, fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 mm thick ACP sheet material consisting of 3mm thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 mm thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and sg=hade on top face and polymer (service) coating of bottom face as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicon sealent, backer rods etc. overall weight of the ACP shall not be less than 7.5 Kilogram/ One Square Metre) 65 Providing and preparing kitchen otta up to 75 cm width, made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. 66 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc.complete 67 Providing and fixing 15 mm thick eco-friendly densified edge calcium silicate false ceiling of approved texture of size 595mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gm/sq.m including both sides) consisting of main T runner suitably spaced at joints to get required length and size 24X38mm. made from 0.33mm thick (minimum) sheet, spaced 1200mm center to center and cross T of size 24X28mm made of 0.33mm thick(minimum ) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (spintone/cosmos/hexa) in the grid, including light fittings, fixtures, smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center to center along main T bottom exposed with 24mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete.(currently this item should be used only for VIP cabins) 68 Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec.One Number: As directed by Engineer- in-charge. 69 Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 mm dia G.I. pipe ( Rezan/ concentiDeleted ire 0.75 mm dia ) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete. 70 Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method ( excluding reinforcement) approved by Engineer-in-charge. 71 Single Bed @ 2025LX 1000DX 650HProviding and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow.Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: - The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm.Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side laminate 72 Bed Side Table @ 400LX 400DX 415HProviding and Fixing Bed Side Table of size 400LX 400DX 415H The bed side unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding 73 Wardrobe with Mirror @ 900LX 600DX 1965HProviding and Fixing Wardrobe with Mirror of size 900LX 600DX 1965H The wardrobe side panels and doors are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 18mm thick Prelam Particle Board with decorative laminate on both sides. The top is made of 36mm prelam particle board with decorative laminate on both sides. (18mm Prelam Particle board and 18mm batons on all sides to achieve 36mm overall thickness). The exposed edges of the top are sealed with 2mm thick PVC edge Banding. The top most part of the wardrobe has an aluminum hanger rod of EBCO make. One drawer of size 400(W) x 150(H) x 450 (D) made of 18mm thick prelam Particle Board has been considered. The drawer will have a multipurpose lock of EBCO premium make. The wardrobe handles are Satin SS finish of 160mm pitch. The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required. 74 Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery 75 NOMAD Interactive Screen: Providing and Fixing NOMAD Interactive Screen with storage. Specification size : 1260L X 500D X 1800H. Prior approval of Engineer in charge in necessary. 76 Providing & Arrangemnt of MId Back, Normal SyncroMechanism, Fixed Armrest, Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery. 77 Café Chrome 6 Seater Canteen tableSpecification : 1800L x 900D x 750H. Prelam Hydroshield Top with MS Understructure in Chrome finish 78 Tango Cafeteria Chair* Stackable Chairs* Without Arms* One Moulded Unbreakable Chair* Available Colors - White, Black, Green, Yellow, Red. 79 Double Bed (Compact 2 Nos.) Specification : 1980L X 900D X 450-750HMade inPrelam board with understorage 80 Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. 81 Sofa Set 3+1+1Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat 82 4 Seater Dining TableSpecification : 800L x 800D x 750H.Prelam Hydroshield Top 83 Stool for Lab and Class-IVProviding and fixing 4 legged Lab stool, Legs made of 16 Guage 45 MM Outer dimension MS Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw. as per design and drawing and instructions of Engineer in charge. 84 Providing & Fixing Curviliner Workstation @ 1500/1500Lx600/600Dx750HT Providing & Fixing Curviliner Workstation @ 1500/1500Lx600/600Dx750HT, Curvilinear Table Top @ 1500/1500Lx600/600D :- TOP to be made of 25 mm thick Prelaminated particle board with PVC edge band, GABLE END to be made of 25 mm thick Prelaminated particle board with PVC edge band, KEYBOARD TRAY (WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, along with 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board. 85 Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery. 86 Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. 87 Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. Providing and fixing Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. with 12 Compartments, Complete body & shutter made of CRCA Sheet with powder coated finish as per approved color. 88 Public Seating Chair. - 3 SeaterProviding and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. 89 12 Seater Reading Table for Library @3600Lx1200Dx750HTProviding and Fixing 12 Seater Reading Table for Liberary @ 3600Lx1200Dx750HT Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Gable Ends : made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. 90 Alluminium foldable ladder for store Providing & Fixing Foldable Alluminum Ladder 1500 mm. Ht. 91 Library Area Table @ 1350Lx750Dx750HTProviding & Fixing of FREE STANDING TABLE @ 1350Lx750Dx 750HT:- TOP to be made of 25 mm thick Prelaminated particle board with PVC edge band, BENT LEG to be CHROME FINISH as per drawing. 92 CHILDREN TRIANGLE TABLESize: 1300L x 1300LX1300L x 400H Specifications Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated PERFORM 50 X 50 Leg with support beam. Intermediate Legs: MS Powder coated 60X40mm legs And Support Leg on Fixed Pedestal and supporting MS cross beams (40X20 mm) 93 CHILDREN CHAIR Size:400LX 400L Specifications Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated PERFORM 50 X 50 Leg with support beam. Intermediate Legs: MS Powder coated 60X40mm legs And Support Leg on Fixed Pedestal and supporting MS cross beams (40X20 mm) 94 CHILDREN SHELF Size:2560LX 400D SpecificationsTable Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support:End Legs: MS powder coated PERFORM 50 X 50 Leg with support beam. Intermediate Legs: MS Powder coated 60X40mm legs And Support Leg on Fixed Pedestal and supporting MS cross beams (40X20 mm) 95 Executives Table @ 1800Lx900Dx750HTProviding & Fixing of Table @ 1800Lx900Dx750HT - TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band as per drawing. 96 CHILDREN CRIB Size:1000LX 650D SpecificationsTable Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated PERFORM 50 X 50 Leg with support beam. Intermediate Legs: MS Powder coated 60X40mm legs And Support Leg on Fixed Pedestal and supporting MS cross beams (40X20 mm) 97 Supplying anderectingPVCtrunking (PVCcasing-n-capping)ofsize25 mm with accessorieson wall/ceiling as per specification No: WG-MA/CON. 98 Supplying anderectingPVCtrunking (PVCcasing-n-capping)ofsize32 mm with accessorieson wall/ceiling as per specification No: WG-MA/CON. 99 Supplying and erecting PVCboxtrunking ofsize50x50 mm. with accessorieson wall/ceiling as per specification No: WG-MA/BOX(1-2-11) 100 Supplying and erecting mains with 2x1.5 sq.mm FRLSHcopperPVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-1) 101 Supplying and erecting green colour earthing with 1x 1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-1) 102 Supplying and erecting mains with 2x2.5 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2) 103 Supplying and erecting green colour earthing with 1x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2) 104 Supplying and erecting mains with 4x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-3) 105 Supplying and erecting green colour earthing with 1x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-3) 106 Supplying and erecting mains with 2x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 107 Supplying and erecting mains with 4x 6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-4) 108 Supplying and erecting green colour earthing with 1x 6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-4) 109 Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.(1-6-1) 110 Supplying and erecting modular type switch 16Aduly erected on provided plate and box with wiring connections complete.(1-6-2) 111 Supplying and erecting modular type 3 pin 6Amultisocket with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-6-10) 112 Supplying and erecting modular type 3 pin 6 / 16Amultisocket with safety shutter,duly erected on provided plate and box with wiring connections complete.(1-6-11) 113 Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.(1-6-23) 114 Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box.(1-6-24) 115 Supplying and erecting PVC Surface modular switch box with double mounting plate for 3module duly erected. 116 Supplying and erecting PVC Surface modular switch box with double mounting plate for 6module duly erected. 117 Supplying and erecting PVC Surface modular switch box with double mounting plate for 12module duly erected. 118 Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthingand required accessories as per specification No: WG-PW/SW 119 Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthingand required accessories as per specification No: WG-PW/SW 120 Wiring for plug on board withSwitch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW(1-7-26) 121 Supplying and erectingLED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing,polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%,THD<10%, p.f. >0.95, operating range of120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50,including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 122 Supplying and erectingLEDPanel Light(600mm X 600mm) Max. 30 Whaving CRCA powder coated housing,polystyrene diffuser havingsystem lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%,THD<10%, p.f. >0.95, operating range of120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 123 Supplying and erecting bulk head LED fittingmax. 10Wwith high transitivity diffuser withsystem lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg.,THD<10%,p.f. >0.95, operating range of140-260V, in built surge protection of 2.5 kV, Life class of50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.(2-1-15) 124 Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12Wwith high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%,THD<10%,p.f. >0.95, operating range of200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.(2-1-16) 125 Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22Wwith high transitivity diffuser withsystem lumens output ofMin.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%,THD<10%,p.f. >0.95, operating range of200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty. 126 Supplying and erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt,CRI>80, CCT of 6500K and THD<=20% havinguseful life of minimum 25000 hrs. with overheating protection with 2 years warranty.(2-1-22) 127 Supplying and erecting ding dong / electronic musical type call bell with heavy duty coilsuitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size.(2-3-13) 128 Supplying and erecting Electronic type cordlesscallbell erected on T.W.board havingportablebellpush working on 9V D.C. battery and(effective range upto 45 meter) bell on 250 V A.C. supply.(2-3-15) 129 Supplying and erecting integrated LED Highbay Fitting70W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics,having system lumens output of Min.10000 Lumens, min. efficacy of 145 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification NoFG-ODF/FLS2. 130 Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.2(-10-13) 131 Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% without IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF(2-10-22) 132 Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan. 133 Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.(2-11-6) 134 Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 80 litres per hour and storage capacity 120 litres with partially stainless steel body as per specification no. AP-WCR/WC(3-3-9) 135 Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)(3-5-1) 136 Supplying, installing, testing and commissioning of3 kVA capacity online pure sine wave with backup time of 1 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, single phase input & 1 phase output complete with all protectionsas per specification no. AP-UPS(3-7-3) 137 Supplying and erecting 12V/26Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete.(3-8-9) 138 Providing and erecting hot dipped galvanised ladder type cable traymanufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware.(7-11-6) 139 Providing and erecting hot dipped galvanised ladder type cable traymanufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware.(7-11-8) 140 Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP(9-1-1) 141 Supplying, erectingandmarking SPMCB 6A to 32A, C-serieswith rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-2) 142 Supplying, erectingandmarking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-3) 143 Supplying, erectingandmarking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-10) 144 Supplying, erectingandmarking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-11) 145 Supplying and erecting triplepole and neutral distribution board (TPNDB),SPMCB of 4 ways/phase(12 poles), with door,1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GIframe (horizontal busbar type) as per specification no. SW-SWR/MCBDB(5-4-1) 146 Supplying&erectingtriplepoleand neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB 147 Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), withdoor, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1 148 Supplying and erecting single pole and neutral distributionboard (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs,with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW SWR/MCBDB(5-4-9) 149 Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.(5-4-13) 150 Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB 151 Supplying, Erecting and Commissioning of4 pole RCCB 40A, electromagnetictype with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB(5-6-5) 152 Supplying, fixing, and commissioning 2 pole, RCBO 6/10/16/20/25A,with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection,with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO(5-6-9) 153 Providing and erecting 4 Pole MCCB,100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB(5-5-1) 154 Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB 155 Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB(5-5-4) 156 Supplying and erecting metal work in CRCA sheet including Iron work for supportswith fabrication ofboxes,panelboards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment andduly powder coated or paintedwith one coat of red lead paint and 2 coats of enamel paint complete.(6-1-1) 157 Supplying and erecting iron work, sheet metal work consisting of CRCAsheets, varioussectionsofiron,plates, chequeredplates,rods,bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority.(6-1-19) 158 Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel / cupboard(6-1-20) 159 Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB 160 Supplying and erecting panelmountingtypedigital ammeterhavingthreeandhalfdigitLEDdisplay, externalCToperated,calibratedfor suitable to operate on 500V, 0 to 1000Ahaving accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs andmounting hardware on provided panel complete with calibration certificate from manufacturer.(6-3-7) 161 Supplying and erecting panelmountingtypedigital voltmeterhavingthreeandhalfdigitLEDdisplay, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5,AC supplywithnecessaryPVCwireleadsandlugsand mountinghardwareonprovidedpanelcompletewith calibration certificate from manufacturer.(6-3-8) 162 Supplying and erecting AC Three Phase Four wire Multifunction Energy Meter of Rating 10 - 60A, Class 1.0 with din rail / Panelmounting to measures and displayparameters with RS485 Modbus communication port. mounting whole current operated meter to measures and display V, I,kWh, KVAh, KW, KVA, P.F, THD, RS 485 Communication port. Electrical parameters shall be available on com port with their mapping address open for third party software(6-3-19) 163 Supplying and erecting selector switch suitable for voltmeter/ammeter for 3 phase AC supply 500V, 50Hz, on provided box / panel and duly connecting with necessary PVC wire leads and lugs. 164 Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on providedbox / panelwith necessary material, wiring & connections etc.(6-5-5) 165 Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.(6-5-6) 166 Supplying and erecting 50 kVAr,3 phase, 50 Hz., Power contactors Derated for microprocessor APFC controller with MPP / APP type capacitor with 525 Vand having minimum overcurrent capacity of 1.8 In,peak inrush current capacity 300 Inand minimum life 150000 hours with , consisting of suitable steps of MPP / APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC 167 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core10sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 168 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core25sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 169 Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core35sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL (7-1-31) 170 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 95sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 171 Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete(1-6-15) 172 Supplying & erecting20 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as perspecification No. WG-TW 173 Supplying & erecting 50 pair, 0.5 mm dia. jelly filled armoured telephonecopper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed havinglaid in provided trench as per specification No. WG-TW 174 Supplying, erecting & commissioningMDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW 175 Supplying, erecting & commissioning 20 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW 176 Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification no. WG-TW(1-9-18) 177 Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of6 x 32 extensions suitable upto 96 extensions complete. 178 Supplying, Erecting and Commissioning ofpush button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete.(1-9-29) 179 Supplying, Erecting and Commissioning ofIP telephone instrument as per specification complete.(1-9-30) 180 Supplying and erecting unbreakable concealed typemodular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-6-34) 181 Supplying and erecting 20m HDMI cord low voltage grademinimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete. 182 Supplying and installingcat-6 cable suitable for networking as per specification no. WG-COC/NC(1-10-1) 183 Supplying and erecting LSZH armoured multimode Optical Fibre Cable with 24 fibres, core dia 50/125 µm (OM4) suitable up to 10 GBPS ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC 184 Supplying and fixing1 m length, UTP patch cord of enhanced Cat 6 type with 4-connector channel, performance test report as per ANSI/TIA-568.2-Din position as per specification No. WG-COC/PC(1-10-17) 185 Supplying and fixing3 m UTP patch cord of enhanced Cat 6 type with 4-connector channel, performance test report as per ANSI/TIA-568.2-Din position as per specification No. WG-COC/PC(1-10-20) 186 Supplying, fixing, and configuring24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WG-NWC/GBS(1-11-4) 187 Supplying, fixing, and configuring broadband ADSL router with all accessories, on provided rack as per specification No. WG-NWC/ADSL 188 Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.(1-12-1) 189 Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO 190 Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP 191 Supplying and fixing9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK(1-12-18) 192 Supplying, installing, testing and commissioning of Commercial Heat pump, having dimension: 1020 x 846 x 1840 (mm), Input power: 6.02 kW, 400 V, 3 Ph, 50 Hz, Output power: 19.8 kW having hot water temperature range 35°C to 52°C and ambient temperature range for max. efficiency 7°C to 43°C, centrally controlled operation, operational noise level: 65 dBA with necessary accessories complete with 5 years ON-SITE warranty. 193 Supplying, installation and testing and commissioning of storage type Mild Steel mixing water tank of capacity 5000 ltrs. tested to a pressure of 8 kg/cm2, insulated with 50 mm thick rock wool with wire mesh around and cladded with 26 SWG aluminium of dish end type with working pressure of 6 kg/cm2, fabricatedwith 6 mm thick plate and dished ends with 8 mm thick plates complete with man hole cover, inner side of the tank coated with FRP coating of 3 mm thickness withstand temperature of 90°C provided with collars of 2 BSP forprovision toinstall6 numbers of electrical heating coils if required with thermal sensors for automatic operation and integrated into the electrical circuits of the circulation pumps and the heat pump with safety valve drain, inlet and outlet nozzle, pressure gauge with all necessary accessories complete. 194 Supplying,erecting, testing and commissioning of10kW, 3 x 3.3 KW AC Electric Vehicle charger (suitable for 2/3/4 wheeler) havingminimum IK08/IP 54 Protection suitable for three phase, 415V AC, 50Hzincoming and 3 nos. output as per IEC 60309 industrial sockets having capacity of output current of 16A 240V ACat each socket with 3.5TFT touch screen for human interface & LED Light for status indication and metering for measurement of consumed energy having metering accuracy +/-1%, one hour battery backup for communication, emergency push stop button and having short circuit, over & under voltage, overload, over temperature, earth leakage protection and enclosure made of minimum 1.5mmduly RAL7035 Coated M.S, Erected oniron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming toIS 17017 Series as per specification. 195 Supplyinganderecting Biometric Access Control System working on 230V A.C. supply with resetting arrangement complete erected 196 Supplying, erectingandmarking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-11) 197 Supplying, fixing, and commissioning MCB type change over switch 4 pole, 40A with 3 positions (I-O-II) with centre off position as per specification no. SW-SWR / MCBCOS(5-3-25) 198 Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.(5-4-13) 199 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core6sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL(7-1-27) 200 Supplying and erecting G.I. pipe‘A’ class 40 mmdia.erectedfor enclosingXLPEarmouredcable on wall/poleas per specification no. CB-CE(7-6-2) 201 Supplying and laying (including excavation)of suitable width & depth up to 90 cm) 50 mmoutside dia. double wall corrugatedpipes(DWC) ofHDPE for enclosing cable below ground/road surface, to required depth complete.(7-6-9) 202 Providing earthing with galvanizediron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. covercomplete with all materials, testing & recording the results asper specification no. EA-EP(9-1-3) 203 Providing pipetype earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rodcomplete with all materials testing and recording the results as per specification no. EA-EP(9-1-4) 204 Supplying and erecting minimum Three & above star rated submersible pump set of 2.25 KW/3 HP with 415 V, 50 c/s AC supply suitable for 100 mm dia. borewell suitable for 60 to 170 LPM discharge at 97 to 30 m head & discharge & delivery pipe of Size-40 mm diameter with a necessary H type clamps as per specification No. WP-SMP 205 Supplying and erecting minimum Three & above star rated submersiblepump set suitable for erection on open well of 3.75 KW/5 HP with 415 V 50c/s. A.C. supply, having delivery head from 43 to 11m and discharge from 120 to 840 litres. per minute & pipe of Suction 65mm / Delivery 50 mmdiameter erected with necessary H type clamps as per specification No. WP-OSP(12-3-2) 206 Supplying and erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with no volt coil and overload elementwith necessary materials and connected to supply up to 7.5 H.P.(12-4-2) 207 Supplying and erecting flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.(12-4-8) 208 Supplying and erecting flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.(12-4-9) 209 Supplying and erecting Water level controller 230/415 V, A.C. , Four way under ground & Over head tank operation only.(12-4-15) 210 Supplying and erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .(12-4-17) 211 Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete.(16-1-5) 212 Making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (pole muffing or any other purpose).(16-3-7) 213 Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete as per specification no. CW-PLB/GP.(16-5-6) 214 Supplying and erecting high density polythene pipe ISI mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected tojet/submersible pump with required material complete.(16-5-18) 215 Supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete.(16-6-15) 216 Supplying and erecting non return valve 50 mm dia in position made of gun metal complete.(16-6-21) 217 Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB(5-5-4) 218 Supplying, installation, testing and commissioning extendable/non-extendable indoor type 11 kV, 630A,load break switch, compliant to IEC 62271 -100, 200 and 102, on provided MS channels/trench/foundations per specification no SW-HTS / LBS 219 Supplying and erecting GI sheet 1.6mm (16 SWG) caution board of size 250 x 200 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for HV/EHV (11000 Volts) installation with compliance to IS 2551-1982(6-1-16) 220 Supplying,erecting,testing and commissioning 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paintof required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 50/5A to 200/5A, VA 10 or 15, Class 0.2S, epoxy casted 3 nos. PT having ratio 11000/V3/110/V3 VA 50, Class 0.2 suitable for provided trivector meter, andprovision for incoming and outgoing cables complete duly tested by licensee with necessary test certificatesand erected on provided plinth/ cc foundation. 221 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core300 sq. mm. aluminiumconductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 222 Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 150 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT 223 Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT 224 Providing and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT 225 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. 226 Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg/m) with base plate in provided foundation as per specification no. OH-PL/RSJ(8-1-13) (11 mtr x 2 Pole =22) 227 Supplying and erecting single pole cut point channel set of for 11kV HT OH line two channel of size 100x50x6mm 1.6m long having stud angle of size 50x50x6mm 1.5m long with necessary clamps, nut bolts etc. complete as per drawing.(8-3-17) 228 Supplying and erecting porcelain disc type insulator 45KN with necessary hardware suitable for 11kV line, complete as per specification no. OH-INS/DI 229 Supplying and erecting porcelain pin type insulator with GI pin suitable for 11kV line, complete asper specification no. OH-INS/PN 230 Supplying and erecting distribution class, 11 kV thyrite type lightening arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA 231 Supplying and erecting pole clamp made from 50x6mm MS flat for pole or pipe, post erected with 15mm bolts and nuts duly painted with one coat of red oxide and two coats of aluminium paint complete. 232 Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification no. EA-EP(9- 1-1) 233 Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clampsfixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.(9-2-3) 234 Supplying, installing, testing & commissioning 3 phase,11/0.433 kV,50 Hz., 250 kVA, Mineral oil immersed and naturally cooledoutdoor type, Copper wound, without gas cushioning , hermetically Sealedtransformer, delta/star connected with additional neutral brought out on load side, temperature rise should not Exceed 45℃ by thermometer in oil and 50℃ by the resistance methodin winding at full load rating, with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, having 7 number of tap positions , with standard accessories complete with test certificate with losses below 980 Watts at 50% load, 2930 Watts at 100%load as perIS:1180 (part 1) : 2014 , with necessary permissions of Electrical Inspector, as per specification no SS- TR-SL 235 Supplying and erecting11 kV outdoor type gang operated airbreak,triple pole switch 400 A capacitywith3postpin type insulator per phase, mounted in horizontalor vertical position with necessary channels on providedcrossarmwithadequate length of C class G.l. pipe for operating handle erectedonextendedsquareshaft. Theoperatinghandle provided with lock and key at suitable heightfrom ground level with necessary clamp. 236 Supplying and erecting, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fusebarrelwithmetalfitting,fuse elementmounted onM.S.channel with working currentof15A capacity complete erected on provided cross arm. 237 Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification no SS-AS/FSG(10-6-18) 238 Supplying and erecting 50 x 50 x 6 mm angle iron as cornersupport 2m long fixed at the middle ofthefencing frame and the otherside inclined at 30 degree angle, in cement concrete foundation of 15 x 15 x 40 cm complete duly painted with one coat of red oxide and two coats aluminium paint complete.(10-6-19) 239 Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete as per specification no SS-AS/DLD(10-6-20) 240 Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75 mm. firmly fixed on provided angle supports with necessary materials complete. (6.044 meters/kg.). 241 Providing printed instruction chart for treating persons suffering from electric shock, printedinEnglish & Marathi and duly laminated complete.(10-6-22) 242 Providing pair ofdulytestedrubber hand glovesas per IS :47705suitable forworking up to 22 kV supply complete.(10-6-23) 243 Supplying standardfirst aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes)(10-6-24) 244 Supplying and fixingPVC synthetic elastomerelectrically insulating matwith class C insulation conforming to IS: 15652 – 2006 tested having 3mm thickness up to 33 kV 245 Supplying shock proof leather safety shoes of electrical grade of standard size as IS :11226, 14544duly tested, with necessary test certificate from manufacturer.(10-6-28) 246 Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete. 247 Excavating hard murum / stone metal roadby chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.(16-1-6) 248 Makingtransformer plinth (1.5 x 1.5 x 1.5) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly plastered by 12 mm thick including watering etc complete. 249 Makingcement concrete foundation including excavation(60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal,45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles)(16-3-4) 250 Making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (pole muffing or any other purpose).(16-3-7) 251 MSEDCL Charges 252 Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB(5-5-4) 253 Supplying and erecting SS enclosure for MCCB suitable for above 250 A up to 800A MCCB.(5-11-19) 254 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core300 sq. mm. aluminiumconductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 255 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. 256 Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification no. EA-EP(9-1-1) 257 Supplying, erecting, testing and commissioning of diesel generating set with alternator of 250 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply,a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 42.30 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 425 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspectoras per specification no. GEN-DG 258 Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 200 kVA up to 250 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF. 259 Excavating hard murum / stone metal roadby chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.(16-1-6) 260 Making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (pole muffing or any other purpose).(16-3-7) 261 Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi strandedcopper Industrial cable for voltage grade up to 1.1 kV(1-3-14) 262 Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2. 263 Supplying and erecting three phase, 415V, street light control panel up to the max load of 6kW, TPN MCB 40A,powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up,auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protectionon provided iron frame / CC foundation.(5-2-5) 264 Supplying, erectingandmarking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kAin provided distribution board as per specification no. SW-SWR/MCB(5-3-1) 265 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core6sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 266 Supplying and laying (including excavation)of suitable width & depth up to 90 cm) 50 mmoutside dia. double wall corrugatedpipes(DWC) ofHDPE for enclosing cable below ground/road surface, to required depth complete.(7-6-9) 267 Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL 268 Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT(8-2-21) 269 Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT 270 Providing earthing with galvanizediron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. covercomplete with all materials, testing & recording the results asper specification no. EA-EP(9-1-3) 271 Providing pipetype earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rodcomplete with all materials testing and recording the results as per specification no. EA-EP(9-1-4) 272 Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clampsfixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.(9-2-3) 273 MakingM- 20 grade reinforced cement concretefoundation by considering the safe soil bearing capacity at site as 10 T/sq.mat 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). 274 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core10sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 275 Supplying, installation, testing and commissioning of booster fire pump[BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of7.5 kW or of suitable kW capacityfor manual/automatic operation and consisting of following :(a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation onwith IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d)Erected on provided suitable size cement concretefoundation duly plastered with anti vibration pads with perfect aligning, properlevelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP 276 Supplying and erectingG.I. pipe‘C’ class ERW25 mm dia with necessary fittings complete asper specification no. FF-PP 277 Supplying and erectingG.I. pipe‘C’ class ERW50 mm dia with necessary fittings complete asper specification no. FF-PP 278 Supplying and erectingG.I. pipe‘C’ class ERW65 mm dia with necessary fittings complete asper specification no. FF-PP 279 Supplying and erectingG.I. pipe‘C’ class ERW75/80 mm dia with necessary fittings complete asper specification no. FF-PP 280 Supplying and erecting G.I. pipe‘C’ class ERW100 mm dia with necessary fittings complete asper specification no. FF-PP(13-6-6) 281 Supplying and erecting G.I. pipe‘C’ class ERW150 mm dia with necessary fittings complete asper specification no. FF-PP(13-6-7) 282 Providing G.I. pipe‘C’ class ERW200 mm dia with necessary fittings complete asper specification no. FF-PP(13-6-8) 283 Providing coating of bitumen paint &4mm thick wrapping for underground 150 mm ring main of fire fighting system.(13-6-10) 284 Supplying and erecting 100 mm dia cast iron foot valve ball type/flap typewith strainer for negative suction complete asper specification no. FF-VL/FV(13-7-2) 285 Supplying and erecting 100mm dia.castiron double flange sluicevalvecomplete with PN16 pressure rating, asper specification no. FF-VL/SV(13-7-14) 286 Supplying and erecting 150mm dia.castiron double flange sluicevalvecomplete with PN16 pressure rating, asper specification no. FF-VL/SV(13-7-15) 287 Supplyinganderecting200mm dia.castiron double flange sluicevalvecomplete with PN16 pressure rating, asper specification no. FF-VL/SV 288 Supplying and erecting 100 mm diacast iron double flange NRV complete with PN16 pressure rating, asper specification no. FF-VL/NRV(13-7-24) 289 Supplying and erecting 25 mmdiagunmetal gatevalvecomplete with PN16 pressure rating, asper specification no. FF-VL/GV(13-7-32) 290 Supplying and erecting stainless steel single outlethydrantvalve fitted with necessary accessories complete asper specification no. FF-VL/HV(13-7-35) 291 Supplying and installingone piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000litres fitted with necessary accessories complete asper specification no. FF-FFA/PT(13-8-1) 292 Supplying and installingwall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose)along with necessary accessories complete asper specification no. FF-FFA/HV(13-8-2) 293 Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe,15m inlength, fitted with necessary accessories complete asper specification no. FF-FFA/RRL(13-8-4) 294 Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzlecomplete as per specifications no. FF-FFA/NZ(13-8-8) 295 Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia, for supplying water in fire tank complete asper specification no. FF-FA/FMC(13-8-11) 296 Supplying and erecting 300 mm dia 1.5min heightair vessel / tankfabricated from min 5mm thick M.S. sheet complete asper specification no. FF-FFA/ACT(13-8-12) 297 Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I.coupling to be fitted on top of air vessel or on wet riser complete asper specification no. FF-FFA/ARV(13-8-13) 298 Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete asper specification no. FF-FFA/PG(13-8-14) 299 Supplying and erecting 12/15 mm dia pressureswitchwith provided isolationvalve,G.I. nipple, elbow, etc complete asper specification no. FF-FFA/PS(13-8-15) 300 Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer diawith required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP(13-8-16) 301 Supplying and erecting M.S./CRCA cabinet for housing single hydrant valveof size ( 400 x 400 x 400)mm or hose pipe boxof size (600 x 600 x 200)mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mmhaving front doors with viewing glass of size (200x150) mmandlockingarrangement with necessary fixingmaterialsuch as rubber biddingetc. dulypainted in post box red colour( Code 538 of IS 5)(13-8-18) 302 Supplying and erecting M.S./CRCA cabinet forhousing FireBrigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet andangleiron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8 x 6) andlocking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)(13-8-19) 303 Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½) dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR. 304 Supplying, erecting, testing and commissioning ofvane type water flow detector75/80 mm dia. with1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.(13-12-2) 305 Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.(13-15-1) 306 Supplying, installing, testing and commissioning ofmanual call point (Pill box) with break glass push button andflip abort switch or agent release switch in metal enclosure complete asper specification no. FF-FAAS/MCP(13-9-7) 307 Supplying, installing, testing and commissioning ofhooters having high (100dB @ 1m) and low (94dB @ 1m) volume setting, group addressing facility allowing multiple sounders to be activated with CRCA enclosure complete asper specification no. FF-FAAS/HTR(13-9-8) 308 Supplying, installing, testing and commissioning ofFRLSXLPE armouredcable 2 core1.5 sq.mm. copper conductorcomplete erected on wall/ ceiling complete asper specification no. CB-LT/CU(13-9-10) 309 Supplying, installing, testing and commissioning of2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories , 16x2CharacterLCDDisplay, provision for zone wise contact and beep sound alarm, suitable to operate on 120-220 V AC,0 - 49 Deg C,93 ± 2 Percentage RH (non- condensing) at 32± 2 Deg C complete asper specification no. FF-FAAS/FACP(13-9-14) 310 Supplying, erecting, testing and commissioning of120 W amplifiersuitable to operate on 230VoltsA.C. / 12VoltsD.C. supply complete asper specification no. FF-PA/AFR(13-11-1) 311 Supplying, erecting, testing and commissioning of15 to 30 Watts soundcolumn or ceiling mounted complete asper specification no. FF-PA/SOC(13-11-2) 312 Supplying, erecting, testing and commissioning ofstand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metreshielded cable and 3 Pin Professional XLR Connector, stereo jack complete asper specification no.FF-PA/MIC(13-11-3) 313 Supplying, erecting, testing and commissioning ofrust free microphone floor stand of chrome plating/powder coating or S.S. material , 500 mm to 1500 mmheight and sturdy mechanism ensuring trouble free movement complete.(13-11-4) 314 Supplying, erecting, testing and commissioning ofrust free microphone table stand of chrome plating/powder coating or S.S. material,up to 500 mm height and suitable base for sturdy mechanism ensuring trouble free movement complete.(13-11-5) 315 Supplying, erecting, testing and commissioning of2 core shielded cable complete asper specification no.FF-PA/MCC(13-11-6) 316 Supplying, erecting, testing and commissioning of1.5 sq. mm speaker wire complete.(13-11-10) 317 Supplying, installation, testing and commissioning of 220/250Volts, single phase, 50 Hz Siren of 3.25 km range (Diametrical),horizontaldoublemountingtype of0.5 HP 6000 RPMon C. C.foundation complete as per specification no. SRN-AS/SM 318 Supplying and erecting ABC powder type fire exitinguisher as per IS: 13849/15683 of 6 kg capacity with necessary clamp for erection on wall (Non-CSR) 319 Supplying and Installation auto glow (Viewing up to 15 Mtr length) fire signages in PVC/Vinyl 4/6 mm thick sheet or as per sample approved by client viz fire doors, fire hose box, fire & electrical safety etc. Size 300 mm X 100 mmas per IS 12349-1988 320 Supplying and Installation auto glow (Viewing up to 15 Mtr length) fir signages in PVC/Vinyl 4/6 mm thick sheet or as per sample approved by client viz fire doors, fire hose box, fire & electrical safety etc. Size 450 mm X 100 mm as per IS 12349-1988 321 Providing and fixing of Emergency Exit Lights LED Beam-II with exit high glow LED White lamps working on battery 12 V 7.6 Ah for duration 4-5 hours (approx) wattage of LED lamp is 26 watt each 2 Nos. of lamp total wattage 52 Watts Weight of unit will be 5.4 kg input voltage 220 V AC 50 Hz Output Volatge 12 V DC the outer cabinet is powder coated, for safety purpose DC & AC fuse system is given in unit as per IS 9583-1981 322 Supplying and erectingHMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. 323 Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. 324 Supplying and erecting 20mm dia. corrugated flexiblepolypropylene conduit 325 Supplying and erecting 10m HDMI cord low voltage grademinimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.. 326 Supplying and installingcat-6 cable suitable for networking as per specification no. WG-COC/NC 327 Supplying, fixing, and configuring 24 ports, POE switch in provided rack as perspecification No. WG-NWC/ENS(1-11-3) 328 Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC. 329 Supplying and fixing POE adaptor to provide DC supply to ethernet devices as per specification No. WG-NAS/PEA 330 Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK 331 Supplying, erecting, testing and commissioning of single phase input & 1 phase output 1 kVA capacity online pure sine wave UPS, with backup time of 1 hrs. PWM & IGBT based,with 0.8 to unity output pf complete with all protections as per specification no. AP-UPS 332 Supplying and erecting 12V/100Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete.(3-8-12) 333 Supplying & erecting of High definition 4/5 Megapixel IP IR Dome Camerawith following featuresImage Sensor : minimum 1/2.8 Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520Video Compression : H.264, H.265 or higher, at least Three individuallyconfigurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View :2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102°6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65°Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White,0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain,white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D DigitalNoise Reduction, Automatic White Balance, Automatic Gain Control, BacklightCompensation, Highlight Compensation.Events : Privacy Masking, Motion detection, Scene change detection, Facecapture, Video tampering, audio exception detection, Region entrance detection,Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X,digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed,FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP,SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour,SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalentBIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.duly erected in position on wall/ceiling/false ceiling/provided pole (mountingheight not more than 5 meter) etc with all accessories etc complete as perspecification no. CCTV-CAM. 334 Supplying & erecting of High definition 4/5 Megapixel IP IR Bullet Camerawith following featuresImage Sensor : minimum 1/2.8 Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520Video Compression : H.264, H.265 or higher, at least Three individuallyconfigurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View :2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102°6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65°Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White,0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain,white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D DigitalNoise Reduction, Automatic White Balance, Automatic Gain Control, BacklightCompensation, Highlight Compensation.Events : Privacy Masking, Motion detection, Scene change detection, Facecapture, Video tampering, audio exception detection, Region entrance detection,Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X,digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed,FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP,SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour,SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalentBIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.duly erected in position on wall/ceiling/false ceiling/provided pole (mountingheight not more than 5 meter) etc with all accessories etc complete as perspecification no. CCTV-CAM 335 Supplying, installing, testing & commissioning of 64/80 Ch Network VideoRecorder (NVR), suitable connect Min. 64 IP Cameras, up to 5 MegapixelResolution, with HDMI 1/VGA 1 and HDMI 2/VGA 2 outputs provided,Atleast one HDMI output of 4K resolution, atleast one VGA output with outputup to 1920 × 1080,Support H.265 or higher, H.264, MJPEG,Supports Redundant Dual Power,Incoming Bandwidth 320 Mbps with minimum 8 SATA Hard Disks, ANRTechnology,8 SATA interfaces for 8 HDDs and capacity of each HDD up to 8TB,minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps selfadaptiveEthernet interface,support multi brand network Cameras,ONVIF conformance,Multiple network monitoring: Web viewer .support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS,iSCSI, UPnP™, HTTPS.RoHS, UL, CE, FCC certified.duly erected in provided U Rack with wiring connections, tagging andprogramming etc. complete as per specificationss no. CCTV-NVR 336 Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Portof NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64,Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected inposition in provided NVR as per specification no. CCTV-HDD 337 Supplying & erecting 43 professional LED display with 1920*1080 (FullHD) Display, suitable for 16/32 channel NVR and following featuresBrightness: minimum 500 Cd/m2Contrast Ratio: minimum 1000:1Viewing angle: 178/178 deg.Response time: maximum 8 msInputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle dulyerected on wall or table top with standard accessories like wall mount stand andwiring connections etc. complete as per specifications no. CCTV-MON 338 Supplying and erecting HMS PVC conduitFRLS grade 20 mm dia. with PVC accessorieson wall / ceiling as per specification No: WG-MA/CON(1-2-3) 339 Supplying and erecting mains with 2x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-5) 340 Supplying, installing, testing and commissioning of15 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 45 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnectingwires / cables up to solar ON GRIDinverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card/chip for 5 yearsincluding net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG(4-5-4) 341 Supplying and erecting switch disconnector fuse (SDF) switch 415V up to 63A, open execution, four pole AC23 A rated with terminal shrouds on both sides and phase barriers along with telescopic shaft for depth adjustments and door interlock and padlock complying to IS/IEC 60947-3 Part-1/3HRC - DIN type fuse,insulation voltage 1000 Vfor enclosing in panel with rotary handle for ON / OFF operation (without HRC fuse)(5-1-17) 342 Supplying and erecting porcelain/epoxy bus bar support complete erected in provided M.S. box for 100A(5-10-26) 343 Supplying and erecting iron work, sheet metal work consisting of CRCAsheets, varioussectionsofiron,plates, chequeredplates,rods,bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority.(6-1-19) 344 Supplying and erecting static energy meter with 3 x 240V 50 Hz. AC supply 10 to 60 A, ISI mark,accuracy class 1.0 with backlit LCD display, (Measuring and display Trivector, V, I, kW, PF, Hz, Last month history of kWh andMD in kW) with special features like TOD, Tamper logging, Optical Communication Port & Display in absence of Power &with transparent hinge type box completeerectedonpolished teak woodboardduly wiredwithrequiredsizeof weather proofPVC wires duly testedby electric supply company.(6-3-3) 345 SupplyinganderectingAC three phase HT CT multifunctionnet meterDLMS compliance of accuracy class 0.5, 3x 63.5V, 50Hz,with backlitLCD display, optical port& RS 232 port( measures import kWh, kVAh, export kWh, kVAh, net kWh, kVAh, V, I, kW, 6 months history of energy, load survey, TOD, tamper detection & logging, power ON/OFF events, instantaneous parameters of rating 1/5A with display in absence of power)with wiring connections and mountinghardwareonprovidedpanelscompletewith calibration certificate from manufacturer. 346 Supplying, installtion & marking of surge arrestor/ surge protection device at the sub main distribution board after the incoming breaker of type 2 tested forImax 40 kAfor three phase and neutralwith compliance to IEC 61643-11 as per specification no. CP-SPD(6-6-6) 347 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 70sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL(7-1-33) 348 Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification no. EA-EP(9-1-1) 349 Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results asper specification no. EA-EP(9-1-2) 350 Supplying and erecting aluminium strip of high purity required sizes used for earthing on wall and/or any other purpose with necessaryaluminiumclampsfixed on wall painted with bituminous paint with joints required as per specification no EA-EP.(9-2-1) 351 Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clampsfixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.(9-2-3) 352 Supplying and erecting conventionalspike typeair termination suitable to carry lightning stroke made up of heavy gauge40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipeerected on provided foundation complete.(9-3-1) 353 Making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (pole muffing or any other purpose).(16-3-7) 354 Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.(1-6-1) 355 Supplying and erecting modular type switch 16Aduly erected on provided plate and box with wiring connections complete.(1-6-2) 356 Supplying and erecting modular type 3 pin 6 / 16Amultisocket with safety shutter,duly erected on provided plate and box with wiring connections complete.(1-6-11) 357 Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected.(1-6-29) 358 Supplying and erecting bulk head LED fittingmax. 10Wwith high transitivity diffuser withsystem lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg.,THD<10%,p.f. >0.95, operating range of140-260V, in built surge protection of 2.5 kV, Life class of50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.(2-1-15) 359 Supplying, erectingandmarking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-7) 360 Supplying, erectingandmarking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kAin provided distribution board as per specification no. SW-SWR/MCB(5-3-13) 361 Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.(5-4-13) 362 Supplying, fixing, and commissioning 2 pole, RCBO 6/10/16/20/25A,with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection,with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO(5-6-9) 363 Supplying, fixing, and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection,with 30/100/300 mA sensitivity and short circuit and earth leakage trip indicationas per specification no SW-RCCB/RCBO(5-6-13) 364 Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 4 sq mm copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU(7-2-9) 365 Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU(7-2-33) 366 Supplying, installing & testing maintenance free earthing comprising of Electrode of 17.2 mm diameterLow Carbon Steel with 250 micronmolecular copper bonded earthing rod ofLength 3malong with 25 kg Carbonbased environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI(9-1-5) 367 Supplying and erecting annealed bare copper wireof high purity of required sizesused forearthing onwall with necessarycopperclampsfixedon wall/cable/conduitwithscrews complete.(9-2-4) 368 SITC of Electric Traction Passenger Lift with · Rated capacity :- 8 Passenger/544Kg· Floors :- B+G+8 floor (10 Stops/10 Landings)· Travel :- 21 to 32 mtrs· Location of Lift Machine:- MR/MRL· Rated speed :- 1.5mps VS· Car/Landing door clear opening of 800 mm wide x 2000 mmhigh· Clear Car size of 1300 mm wide x 1100 mm deep x 2250mm high· Lift shaft available having clear size of .1900 mm wide x 1900 mmdeep, 1500 mm Pit depth, 4250 mm Overhead.· Doors type :- COPO/TOPO Doors with frame made from SS 304 gradesolid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landingdoors with SS door architraves/frames The lift doors shall have minimum 1hour fire rating (with submission of necessary valid test certificate issuedby NABL accredited or Independent test laboratory).· Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of1.5mm, thick with hairline finish with frame made from MS girders, bracing ofadequate size with minimum safety factor of 5, with Toe Guard Apron, withnecessary false ceiling with adequate LED lights, blower/fan for ventilation & SSchequered plate flooring, handrails, mirror, emergency light etc. The lift carinterior design shall be done as per the directions of engineer in charge. (CSR Item no.17.1.13) 369 SITC of Electric Traction Passenger cum Stretcher/Hospital Liftwith · Rated capacity :- 15 Passenger/1020Kg· Floors :- B+G+8 floor (10 Stops/10 Landings)· Travel :- 21 to 32 mtrs· Location of Lift Machine:- MR/MRL [applicable for PassengerLift with MRL only & Stretcher/Hospital Lift with MR & MRL]· Rated speed :- 1.5mps VS· Car/Landing door clear opening of 800/900/1000 mm wide x2000mm high· Clear Car size of 1000 mm wide x 2400 mm deep x 2250mm high· Lift shaft available having clear size of 1800 mm wide x 3000 mmdeep,1500 mm Pit depth, 4250 mm Overhead· Doors type :- COPO/TOPO Doors with frame made from SS 304 gradesolid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landingdoors with SS door architraves/frames The lift doors shall have minimum 1hour fire rating (with submission of necessary valid test certificate issuedby NABL accredited or Independent test laboratory).· Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of1.5mm, thick with hairline finish with frame made from MS girders, bracing ofadequate size with minimum safety factor of 5, with Toe Guard Apron, withnecessary false ceiling with adequate LED lights, blower/fan for ventilation & SSchequered plate flooring, handrails, mirror, emergency light etc. The lift carinterior design shall be done as per the directions of engineer in charge. (CSR Item no.17.1.17) 370 For Lift having 800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOPs with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travellingcables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. 371 For Lift having 1000mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOPs with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travellingcables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. 372 Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC(1-1-9) 373 Supplying and erecting mains with 2x2.5 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2) 374 Supplying and erecting green colour earthing with 1x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2) 375 Supplying, installing, testing & commissioning split type variable speed invertertechnology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TRcapacity having ISEER minimum 5.00suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC 376 Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 12mm complete. 377 Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigeranthaving 22SWG thickness and inner dia/size 16mm complete. 378 Supplying, erecting, testing and commissioning of 10HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. 379 Supplying, erecting, testing and commissioning of 12HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. 380 Supplying, erecting, testing and commissioning of 14HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. 381 Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 0.6TR - 0.8TR ( 229 to 358 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete. 382 Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.3TR (421 cfm) to 1.7TR (586 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anticorrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete. 383 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 2.0TR (618 cfm) to 2.3TR (671 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. 384 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR ( 1100 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. 385 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.0TR (1100 cfm) to 3.2TR (1165 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. 386 Supplying and erecting circular flexible/rigid PVC pipe duct of size 100mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves / dampers, filters at position complete. 387 Supplying and erecting circular flexible/rigid PVC pipe duct of size 150mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves/dampers, filters at position complete. 388 Supplying, erecting, testing and commissioning centralised programmable remote control panel (HMI) touch manager controls minimum 16 system of 64 ODUs can be controlled and up to 992 IDUs can be individually mounted and controlled indoor units having colour min 200mm size LCD touch panel, yearly schedule, power proportional distribution function, temperature limitation, history function complete erected on wall integrated with provided fire alarm system. 389 Supplying and installation of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system. 390 supplying, laying/fixing, testing and commissioning ofappropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. 391 supplying, laying/fixing, testing and commissioning ofappropriate nominal refrigerant copper pipe of 22.2mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiation with OEM standards of VRV/VRF air conditioning system complete. 392 supplying, laying/fixing, testing and commissioning ofappropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. 393 Supplying, laying / fixing, testing and commissioning of ofappropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.(3-11-94) 394 Supplying, laying / fixing, testing and commissioning of ofappropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.(3-11-95) 395 Supplying, laying / fixing, testing and commissioning of ofappropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.(3-11-96) 396 supplying, laying/fixing, testing and commissioning ofappropriate nominal refrigerant copper pipe of 6.4mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. 397 Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline/cabint exhaust air fan inlet unit having 5000 cfm capacity with maintaining the static pressure minimum 65mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.With fabrication and iron work. 398 Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline/cabint exhaust air fan inlet unit having 3000 cfm capacity with maintaining the static pressure minimum 65mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.With fabrication and iron work. 399 Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline/cabint exhaust air fan inlet unit having 2500 cfm capacity with maintaining the static pressure minimum 65mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.With fabrication and iron work. 400 Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline/cabint exhaust air fan inlet unit having 1000 cfm capacity with maintaining the static pressure minimum 65mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.With fabrication and iron work. 401 Supplying & erecting tile type modular diffuser made from aluminium sheet with powder coated matching to the ceiling shade for provided supply and return air complete. 402 Supplying and erectingelastomeric nitrile rubber / foam tube type sleeves forcoating and insulating on provided PVC / copper pipes having 9 mm thickness and inner diameter / sizes 28 mm for solar water heater/AC system. 403 Supplying and erecting 25/32 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.2 mm conforming to IS 15778 (CTS Series)with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC 404 Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.(5-4-13) 405 Supplying, fixing, and commissioning 2 pole, RCBO 6/10/16/20/25A,with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection,with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO(5-6-9) 406 Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection,with 30/100/300 mA sensitivity and short circuit and earth leakage trip indicationas per specification no SW-RCCB/RCBO 407 Supplying and erecting GI sheet 0.6 mm (24 SWG) having zinc coating of 120 microns withgalvanization process compliance to IS 2629:1985 tobeused for fabricationofboxespanelboardsetc. including cutting, bending, drilling, welding, riveting etc. and paintingwithone coat of red leadpaint and 2 coats of enamel paint.(6-1-2) 408 Supplying and erecting GI sheet 0.8 mm (22 SWG) having zinc coating of 120 microns withgalvanization process compliance to IS 2629:1985 tobeused for fabricationofboxespanelboardsetc. including cutting, bending, drilling, welding, riveting etc. and paintingwithone coat of red leadpaint and 2 coats of enamel paint.(6-1-3) 409 Supplying and erectingGI sheet 1.25 mm (18 SWG)having zinc coating of 350 microns withgalvanization process compliance to IS 2629:1985 tobeused for fabricationofboxespanelboardsetc. including cutting, bending, drilling, welding, riveting etc. and paintingwithone coat of red leadpaint and 2 coats of enamel paint. 410 Supplying and erecting iron work, sheet metal work consisting of CRCAsheets, varioussectionsofiron,plates, chequeredplates,rods,bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority.(6-1-19) 411 Supplying, erecting& terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core6 sq. mm. copperconductor completeerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU 412 Supplying, erecting& terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core10 sq. mm. copperconductorcompleteerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU
Contract Date: Sep 27, 2025 Contract Value : 16.94 Crore
Local Bodies No of Bidders 3
Maharashtra View Result →
19.
Public Administrative Department #7670487 AOC
Construction And Development Of Working Women Hostel At Chikalthana, Weekly Market Gut No 410, Chhatrapati Sambhajinagar- 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) 2 Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means 3 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means 4 Excavation for foundation in Hard-rock by blasting including trimming and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (Lift from 1.5m To 3.0 m) By Mechanical Means 5 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steelcentering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 6 Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per One Square Metre of vertical surface area covering 10 years guarantee on bond paper. 7 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete 8 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) 9 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. 10 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 11 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 12 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 13 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 14 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 15 Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 16 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 17 Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15 cmto 20 cm including watering and compaction etc.complete. 18 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. 19 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints,watering and scaffolding etc. Complete 20 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. 21 Providing and fixing precast R.C.C. frames of door/windows/ ventilators of c/s 125mm X 50mm with 2 bars of 8mm dia. Of steel as r/f . In half brick wall 22 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. 23 Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. 24 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) 25 Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box. 26 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc 27 Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete 28 Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. 29 Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. 30 Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. 31 Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 32 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or a directed etc. complete. 33 Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete 34 Providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. supply pipe including necessary bend and socket complete 35 Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity above 1000 to 20,000 litres 36 Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use) 37 Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. 38 Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete 39 Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. 40 Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. 41 Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete 42 Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. 43 Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete 44 Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. 45 Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. 46 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75Kilogramwith lid and frame fixed in cement concrete 47 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (MJP-SSR- 2023-24, Bd A1/259) 48 Lift 0 to 1.5 M Cum 140.00 140.00 Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (MJP-SSR- 2023-24, Bd-A-2/259) 49 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (MJP-SSR- 2023-24, Bd-A-4/259) 50 Providing ISI standard stoneware pipes including all taxes inspectin charges, railway freight, unloading, transoport, stacking,complete.150mm dia. SWG pipe 51 Louvering and jointing in proper grade, alignment standard stoneware pipes with cement joint 1:6 C.M. proportion including unloading, transoport, stacking, necessary excavation and jointing complete. 150mm dia. SWG pipe 52 Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete 53 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. (SSR.Item no. 35.21) 54 Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.) 55 Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. 56 Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. 57 Transportation of surplus material from work site to any disposal place as directed by Er.incharge eith a lead of 5km including and stacking completed. 58 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. 59 Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete. 60 Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi- strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surfaceand nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated,Hex head, self-drilling screw etc. complete. (weight of profile 61 Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 year guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete 62 Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anticorrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish 63 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. 64 Providing, applying, fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 mm thick ACP sheet material consisting of 3mm thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 mm thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and sg=hade on top face and polymer (service) coating of bottom face as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicon sealent, backer rods etc. overall weight of the ACP shall not be less than 7.5 Kilogram/ One Square Metre) 65 Providing and preparing kitchen otta up to 75 cm width, made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. 66 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc.complete 67 Providing and fixing 15 mm thick eco-friendly densified edge calcium silicate false ceiling of approved texture of size 595mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gm/sq.m including both sides) consisting of main T runner suitably spaced at joints to get required length and size 24X38mm. made from 0.33mm thick (minimum) sheet, spaced 1200mm center to center and cross T of size 24X28mm made of 0.33mm thick(minimum ) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (spintone/cosmos/hexa) in the grid, including light fittings, fixtures, smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center to center along main T bottom exposed with 24mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete.(currently this item should be used only for VIP cabins) 68 Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec.One Number: As directed by Engineer- in-charge. 69 Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 mm dia G.I. pipe ( Rezan/ concentiDeleted ire 0.75 mm dia ) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete. 70 Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method ( excluding reinforcement) approved by Engineer-in-charge. 71 Single Bed @ 2025LX 1000DX 650HProviding and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow.Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: - The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm.Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side laminate 72 Bed Side Table @ 400LX 400DX 415HProviding and Fixing Bed Side Table of size 400LX 400DX 415H The bed side unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding 73 Wardrobe with Mirror @ 900LX 600DX 1965HProviding and Fixing Wardrobe with Mirror of size 900LX 600DX 1965H The wardrobe side panels and doors are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 18mm thick Prelam Particle Board with decorative laminate on both sides. The top is made of 36mm prelam particle board with decorative laminate on both sides. (18mm Prelam Particle board and 18mm batons on all sides to achieve 36mm overall thickness). The exposed edges of the top are sealed with 2mm thick PVC edge Banding. The top most part of the wardrobe has an aluminum hanger rod of EBCO make. One drawer of size 400(W) x 150(H) x 450 (D) made of 18mm thick prelam Particle Board has been considered. The drawer will have a multipurpose lock of EBCO premium make. The wardrobe handles are Satin SS finish of 160mm pitch. The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required. 74 Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery 75 NOMAD Interactive Screen: Providing and Fixing NOMAD Interactive Screen with storage. Specification size : 1260L X 500D X 1800H. Prior approval of Engineer in charge in necessary. 76 Providing & Arrangemnt of MId Back, Normal SyncroMechanism, Fixed Armrest, Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery. 77 Café Chrome 6 Seater Canteen tableSpecification : 1800L x 900D x 750H. Prelam Hydroshield Top with MS Understructure in Chrome finish 78 Tango Cafeteria Chair* Stackable Chairs* Without Arms* One Moulded Unbreakable Chair* Available Colors - White, Black, Green, Yellow, Red. 79 Double Bed (Compact 2 Nos.) Specification : 1980L X 900D X 450-750HMade inPrelam board with understorage 80 Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. 81 Sofa Set 3+1+1Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat 82 4 Seater Dining TableSpecification : 800L x 800D x 750H.Prelam Hydroshield Top 83 Stool for Lab and Class-IVProviding and fixing 4 legged Lab stool, Legs made of 16 Guage 45 MM Outer dimension MS Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw. as per design and drawing and instructions of Engineer in charge. 84 Providing & Fixing Curviliner Workstation @ 1500/1500Lx600/600Dx750HT Providing & Fixing Curviliner Workstation @ 1500/1500Lx600/600Dx750HT, Curvilinear Table Top @ 1500/1500Lx600/600D :- TOP to be made of 25 mm thick Prelaminated particle board with PVC edge band, GABLE END to be made of 25 mm thick Prelaminated particle board with PVC edge band, KEYBOARD TRAY (WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, along with 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board. 85 Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery. 86 Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. 87 Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. Providing and fixing Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. with 12 Compartments, Complete body & shutter made of CRCA Sheet with powder coated finish as per approved color. 88 Public Seating Chair. - 3 SeaterProviding and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. 89 12 Seater Reading Table for Library @3600Lx1200Dx750HTProviding and Fixing 12 Seater Reading Table for Liberary @ 3600Lx1200Dx750HT Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Gable Ends : made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. 90 Alluminium foldable ladder for store Providing & Fixing Foldable Alluminum Ladder 1500 mm. Ht. 91 Library Area Table @ 1350Lx750Dx750HTProviding & Fixing of FREE STANDING TABLE @ 1350Lx750Dx 750HT:- TOP to be made of 25 mm thick Prelaminated particle board with PVC edge band, BENT LEG to be CHROME FINISH as per drawing. 92 CHILDREN TRIANGLE TABLESize: 1300L x 1300LX1300L x 400H Specifications Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated PERFORM 50 X 50 Leg with support beam. Intermediate Legs: MS Powder coated 60X40mm legs And Support Leg on Fixed Pedestal and supporting MS cross beams (40X20 mm) 93 CHILDREN CHAIR Size:400LX 400L Specifications Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated PERFORM 50 X 50 Leg with support beam. Intermediate Legs: MS Powder coated 60X40mm legs And Support Leg on Fixed Pedestal and supporting MS cross beams (40X20 mm) 94 CHILDREN SHELF Size:2560LX 400D SpecificationsTable Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support:End Legs: MS powder coated PERFORM 50 X 50 Leg with support beam. Intermediate Legs: MS Powder coated 60X40mm legs And Support Leg on Fixed Pedestal and supporting MS cross beams (40X20 mm) 95 Executives Table @ 1800Lx900Dx750HTProviding & Fixing of Table @ 1800Lx900Dx750HT - TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band as per drawing. 96 CHILDREN CRIB Size:1000LX 650D SpecificationsTable Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated PERFORM 50 X 50 Leg with support beam. Intermediate Legs: MS Powder coated 60X40mm legs And Support Leg on Fixed Pedestal and supporting MS cross beams (40X20 mm) 97 Supplying anderectingPVCtrunking (PVCcasing-n-capping)ofsize25 mm with accessorieson wall/ceiling as per specification No: WG-MA/CON. 98 Supplying anderectingPVCtrunking (PVCcasing-n-capping)ofsize32 mm with accessorieson wall/ceiling as per specification No: WG-MA/CON. 99 Supplying and erecting PVCboxtrunking ofsize50x50 mm. with accessorieson wall/ceiling as per specification No: WG-MA/BOX(1-2-11) 100 Supplying and erecting mains with 2x1.5 sq.mm FRLSHcopperPVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-1) 101 Supplying and erecting green colour earthing with 1x 1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-1) 102 Supplying and erecting mains with 2x2.5 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2) 103 Supplying and erecting green colour earthing with 1x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2) 104 Supplying and erecting mains with 4x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-3) 105 Supplying and erecting green colour earthing with 1x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-3) 106 Supplying and erecting mains with 2x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 107 Supplying and erecting mains with 4x 6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-4) 108 Supplying and erecting green colour earthing with 1x 6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-4) 109 Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.(1-6-1) 110 Supplying and erecting modular type switch 16Aduly erected on provided plate and box with wiring connections complete.(1-6-2) 111 Supplying and erecting modular type 3 pin 6Amultisocket with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-6-10) 112 Supplying and erecting modular type 3 pin 6 / 16Amultisocket with safety shutter,duly erected on provided plate and box with wiring connections complete.(1-6-11) 113 Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.(1-6-23) 114 Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box.(1-6-24) 115 Supplying and erecting PVC Surface modular switch box with double mounting plate for 3module duly erected. 116 Supplying and erecting PVC Surface modular switch box with double mounting plate for 6module duly erected. 117 Supplying and erecting PVC Surface modular switch box with double mounting plate for 12module duly erected. 118 Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthingand required accessories as per specification No: WG-PW/SW 119 Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthingand required accessories as per specification No: WG-PW/SW 120 Wiring for plug on board withSwitch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW(1-7-26) 121 Supplying and erectingLED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing,polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%,THD<10%, p.f. >0.95, operating range of120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50,including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 122 Supplying and erectingLEDPanel Light(600mm X 600mm) Max. 30 Whaving CRCA powder coated housing,polystyrene diffuser havingsystem lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%,THD<10%, p.f. >0.95, operating range of120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 123 Supplying and erecting bulk head LED fittingmax. 10Wwith high transitivity diffuser withsystem lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg.,THD<10%,p.f. >0.95, operating range of140-260V, in built surge protection of 2.5 kV, Life class of50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.(2-1-15) 124 Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12Wwith high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%,THD<10%,p.f. >0.95, operating range of200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.(2-1-16) 125 Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22Wwith high transitivity diffuser withsystem lumens output ofMin.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%,THD<10%,p.f. >0.95, operating range of200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty. 126 Supplying and erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt,CRI>80, CCT of 6500K and THD<=20% havinguseful life of minimum 25000 hrs. with overheating protection with 2 years warranty.(2-1-22) 127 Supplying and erecting ding dong / electronic musical type call bell with heavy duty coilsuitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size.(2-3-13) 128 Supplying and erecting Electronic type cordlesscallbell erected on T.W.board havingportablebellpush working on 9V D.C. battery and(effective range upto 45 meter) bell on 250 V A.C. supply.(2-3-15) 129 Supplying and erecting integrated LED Highbay Fitting70W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics,having system lumens output of Min.10000 Lumens, min. efficacy of 145 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification NoFG-ODF/FLS2. 130 Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.2(-10-13) 131 Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% without IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF(2-10-22) 132 Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan. 133 Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.(2-11-6) 134 Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 80 litres per hour and storage capacity 120 litres with partially stainless steel body as per specification no. AP-WCR/WC(3-3-9) 135 Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)(3-5-1) 136 Supplying, installing, testing and commissioning of3 kVA capacity online pure sine wave with backup time of 1 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, single phase input & 1 phase output complete with all protectionsas per specification no. AP-UPS(3-7-3) 137 Supplying and erecting 12V/26Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete.(3-8-9) 138 Providing and erecting hot dipped galvanised ladder type cable traymanufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware.(7-11-6) 139 Providing and erecting hot dipped galvanised ladder type cable traymanufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware.(7-11-8) 140 Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP(9-1-1) 141 Supplying, erectingandmarking SPMCB 6A to 32A, C-serieswith rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-2) 142 Supplying, erectingandmarking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-3) 143 Supplying, erectingandmarking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-10) 144 Supplying, erectingandmarking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-11) 145 Supplying and erecting triplepole and neutral distribution board (TPNDB),SPMCB of 4 ways/phase(12 poles), with door,1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GIframe (horizontal busbar type) as per specification no. SW-SWR/MCBDB(5-4-1) 146 Supplying&erectingtriplepoleand neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB 147 Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), withdoor, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1 148 Supplying and erecting single pole and neutral distributionboard (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs,with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW SWR/MCBDB(5-4-9) 149 Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.(5-4-13) 150 Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB 151 Supplying, Erecting and Commissioning of4 pole RCCB 40A, electromagnetictype with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB(5-6-5) 152 Supplying, fixing, and commissioning 2 pole, RCBO 6/10/16/20/25A,with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection,with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO(5-6-9) 153 Providing and erecting 4 Pole MCCB,100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB(5-5-1) 154 Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB 155 Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB(5-5-4) 156 Supplying and erecting metal work in CRCA sheet including Iron work for supportswith fabrication ofboxes,panelboards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment andduly powder coated or paintedwith one coat of red lead paint and 2 coats of enamel paint complete.(6-1-1) 157 Supplying and erecting iron work, sheet metal work consisting of CRCAsheets, varioussectionsofiron,plates, chequeredplates,rods,bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority.(6-1-19) 158 Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel / cupboard(6-1-20) 159 Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB 160 Supplying and erecting panelmountingtypedigital ammeterhavingthreeandhalfdigitLEDdisplay, externalCToperated,calibratedfor suitable to operate on 500V, 0 to 1000Ahaving accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs andmounting hardware on provided panel complete with calibration certificate from manufacturer.(6-3-7) 161 Supplying and erecting panelmountingtypedigital voltmeterhavingthreeandhalfdigitLEDdisplay, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5,AC supplywithnecessaryPVCwireleadsandlugsand mountinghardwareonprovidedpanelcompletewith calibration certificate from manufacturer.(6-3-8) 162 Supplying and erecting AC Three Phase Four wire Multifunction Energy Meter of Rating 10 - 60A, Class 1.0 with din rail / Panelmounting to measures and displayparameters with RS485 Modbus communication port. mounting whole current operated meter to measures and display V, I,kWh, KVAh, KW, KVA, P.F, THD, RS 485 Communication port. Electrical parameters shall be available on com port with their mapping address open for third party software(6-3-19) 163 Supplying and erecting selector switch suitable for voltmeter/ammeter for 3 phase AC supply 500V, 50Hz, on provided box / panel and duly connecting with necessary PVC wire leads and lugs. 164 Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on providedbox / panelwith necessary material, wiring & connections etc.(6-5-5) 165 Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.(6-5-6) 166 Supplying and erecting 50 kVAr,3 phase, 50 Hz., Power contactors Derated for microprocessor APFC controller with MPP / APP type capacitor with 525 Vand having minimum overcurrent capacity of 1.8 In,peak inrush current capacity 300 Inand minimum life 150000 hours with , consisting of suitable steps of MPP / APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC 167 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core10sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 168 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core25sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 169 Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core35sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL (7-1-31) 170 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 95sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 171 Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete(1-6-15) 172 Supplying & erecting20 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as perspecification No. WG-TW 173 Supplying & erecting 50 pair, 0.5 mm dia. jelly filled armoured telephonecopper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed havinglaid in provided trench as per specification No. WG-TW 174 Supplying, erecting & commissioningMDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW 175 Supplying, erecting & commissioning 20 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW 176 Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification no. WG-TW(1-9-18) 177 Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of6 x 32 extensions suitable upto 96 extensions complete. 178 Supplying, Erecting and Commissioning ofpush button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete.(1-9-29) 179 Supplying, Erecting and Commissioning ofIP telephone instrument as per specification complete.(1-9-30) 180 Supplying and erecting unbreakable concealed typemodular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-6-34) 181 Supplying and erecting 20m HDMI cord low voltage grademinimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete. 182 Supplying and installingcat-6 cable suitable for networking as per specification no. WG-COC/NC(1-10-1) 183 Supplying and erecting LSZH armoured multimode Optical Fibre Cable with 24 fibres, core dia 50/125 µm (OM4) suitable up to 10 GBPS ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC 184 Supplying and fixing1 m length, UTP patch cord of enhanced Cat 6 type with 4-connector channel, performance test report as per ANSI/TIA-568.2-Din position as per specification No. WG-COC/PC(1-10-17) 185 Supplying and fixing3 m UTP patch cord of enhanced Cat 6 type with 4-connector channel, performance test report as per ANSI/TIA-568.2-Din position as per specification No. WG-COC/PC(1-10-20) 186 Supplying, fixing, and configuring24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WG-NWC/GBS(1-11-4) 187 Supplying, fixing, and configuring broadband ADSL router with all accessories, on provided rack as per specification No. WG-NWC/ADSL 188 Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.(1-12-1) 189 Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO 190 Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP 191 Supplying and fixing9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK(1-12-18) 192 Supplying, installing, testing and commissioning of Commercial Heat pump, having dimension: 1020 x 846 x 1840 (mm), Input power: 6.02 kW, 400 V, 3 Ph, 50 Hz, Output power: 19.8 kW having hot water temperature range 35°C to 52°C and ambient temperature range for max. efficiency 7°C to 43°C, centrally controlled operation, operational noise level: 65 dBA with necessary accessories complete with 5 years ON-SITE warranty. 193 Supplying, installation and testing and commissioning of storage type Mild Steel mixing water tank of capacity 5000 ltrs. tested to a pressure of 8 kg/cm2, insulated with 50 mm thick rock wool with wire mesh around and cladded with 26 SWG aluminium of dish end type with working pressure of 6 kg/cm2, fabricatedwith 6 mm thick plate and dished ends with 8 mm thick plates complete with man hole cover, inner side of the tank coated with FRP coating of 3 mm thickness withstand temperature of 90°C provided with collars of 2 BSP forprovision toinstall6 numbers of electrical heating coils if required with thermal sensors for automatic operation and integrated into the electrical circuits of the circulation pumps and the heat pump with safety valve drain, inlet and outlet nozzle, pressure gauge with all necessary accessories complete. 194 Supplying,erecting, testing and commissioning of10kW, 3 x 3.3 KW AC Electric Vehicle charger (suitable for 2/3/4 wheeler) havingminimum IK08/IP 54 Protection suitable for three phase, 415V AC, 50Hzincoming and 3 nos. output as per IEC 60309 industrial sockets having capacity of output current of 16A 240V ACat each socket with 3.5TFT touch screen for human interface & LED Light for status indication and metering for measurement of consumed energy having metering accuracy +/-1%, one hour battery backup for communication, emergency push stop button and having short circuit, over & under voltage, overload, over temperature, earth leakage protection and enclosure made of minimum 1.5mmduly RAL7035 Coated M.S, Erected oniron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming toIS 17017 Series as per specification. 195 Supplyinganderecting Biometric Access Control System working on 230V A.C. supply with resetting arrangement complete erected 196 Supplying, erectingandmarking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-11) 197 Supplying, fixing, and commissioning MCB type change over switch 4 pole, 40A with 3 positions (I-O-II) with centre off position as per specification no. SW-SWR / MCBCOS(5-3-25) 198 Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.(5-4-13) 199 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core6sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL(7-1-27) 200 Supplying and erecting G.I. pipe‘A’ class 40 mmdia.erectedfor enclosingXLPEarmouredcable on wall/poleas per specification no. CB-CE(7-6-2) 201 Supplying and laying (including excavation)of suitable width & depth up to 90 cm) 50 mmoutside dia. double wall corrugatedpipes(DWC) ofHDPE for enclosing cable below ground/road surface, to required depth complete.(7-6-9) 202 Providing earthing with galvanizediron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. covercomplete with all materials, testing & recording the results asper specification no. EA-EP(9-1-3) 203 Providing pipetype earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rodcomplete with all materials testing and recording the results as per specification no. EA-EP(9-1-4) 204 Supplying and erecting minimum Three & above star rated submersible pump set of 2.25 KW/3 HP with 415 V, 50 c/s AC supply suitable for 100 mm dia. borewell suitable for 60 to 170 LPM discharge at 97 to 30 m head & discharge & delivery pipe of Size-40 mm diameter with a necessary H type clamps as per specification No. WP-SMP 205 Supplying and erecting minimum Three & above star rated submersiblepump set suitable for erection on open well of 3.75 KW/5 HP with 415 V 50c/s. A.C. supply, having delivery head from 43 to 11m and discharge from 120 to 840 litres. per minute & pipe of Suction 65mm / Delivery 50 mmdiameter erected with necessary H type clamps as per specification No. WP-OSP(12-3-2) 206 Supplying and erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with no volt coil and overload elementwith necessary materials and connected to supply up to 7.5 H.P.(12-4-2) 207 Supplying and erecting flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.(12-4-8) 208 Supplying and erecting flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.(12-4-9) 209 Supplying and erecting Water level controller 230/415 V, A.C. , Four way under ground & Over head tank operation only.(12-4-15) 210 Supplying and erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .(12-4-17) 211 Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete.(16-1-5) 212 Making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (pole muffing or any other purpose).(16-3-7) 213 Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete as per specification no. CW-PLB/GP.(16-5-6) 214 Supplying and erecting high density polythene pipe ISI mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected tojet/submersible pump with required material complete.(16-5-18) 215 Supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete.(16-6-15) 216 Supplying and erecting non return valve 50 mm dia in position made of gun metal complete.(16-6-21) 217 Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB(5-5-4) 218 Supplying, installation, testing and commissioning extendable/non-extendable indoor type 11 kV, 630A,load break switch, compliant to IEC 62271 -100, 200 and 102, on provided MS channels/trench/foundations per specification no SW-HTS / LBS 219 Supplying and erecting GI sheet 1.6mm (16 SWG) caution board of size 250 x 200 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for HV/EHV (11000 Volts) installation with compliance to IS 2551-1982(6-1-16) 220 Supplying,erecting,testing and commissioning 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paintof required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 50/5A to 200/5A, VA 10 or 15, Class 0.2S, epoxy casted 3 nos. PT having ratio 11000/V3/110/V3 VA 50, Class 0.2 suitable for provided trivector meter, andprovision for incoming and outgoing cables complete duly tested by licensee with necessary test certificatesand erected on provided plinth/ cc foundation. 221 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core300 sq. mm. aluminiumconductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 222 Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 150 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT 223 Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT 224 Providing and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT 225 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. 226 Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg/m) with base plate in provided foundation as per specification no. OH-PL/RSJ(8-1-13) (11 mtr x 2 Pole =22) 227 Supplying and erecting single pole cut point channel set of for 11kV HT OH line two channel of size 100x50x6mm 1.6m long having stud angle of size 50x50x6mm 1.5m long with necessary clamps, nut bolts etc. complete as per drawing.(8-3-17) 228 Supplying and erecting porcelain disc type insulator 45KN with necessary hardware suitable for 11kV line, complete as per specification no. OH-INS/DI 229 Supplying and erecting porcelain pin type insulator with GI pin suitable for 11kV line, complete asper specification no. OH-INS/PN 230 Supplying and erecting distribution class, 11 kV thyrite type lightening arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA 231 Supplying and erecting pole clamp made from 50x6mm MS flat for pole or pipe, post erected with 15mm bolts and nuts duly painted with one coat of red oxide and two coats of aluminium paint complete. 232 Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification no. EA-EP(9- 1-1) 233 Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clampsfixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.(9-2-3) 234 Supplying, installing, testing & commissioning 3 phase,11/0.433 kV,50 Hz., 250 kVA, Mineral oil immersed and naturally cooledoutdoor type, Copper wound, without gas cushioning , hermetically Sealedtransformer, delta/star connected with additional neutral brought out on load side, temperature rise should not Exceed 45℃ by thermometer in oil and 50℃ by the resistance methodin winding at full load rating, with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, having 7 number of tap positions , with standard accessories complete with test certificate with losses below 980 Watts at 50% load, 2930 Watts at 100%load as perIS:1180 (part 1) : 2014 , with necessary permissions of Electrical Inspector, as per specification no SS- TR-SL 235 Supplying and erecting11 kV outdoor type gang operated airbreak,triple pole switch 400 A capacitywith3postpin type insulator per phase, mounted in horizontalor vertical position with necessary channels on providedcrossarmwithadequate length of C class G.l. pipe for operating handle erectedonextendedsquareshaft. Theoperatinghandle provided with lock and key at suitable heightfrom ground level with necessary clamp. 236 Supplying and erecting, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fusebarrelwithmetalfitting,fuse elementmounted onM.S.channel with working currentof15A capacity complete erected on provided cross arm. 237 Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification no SS-AS/FSG(10-6-18) 238 Supplying and erecting 50 x 50 x 6 mm angle iron as cornersupport 2m long fixed at the middle ofthefencing frame and the otherside inclined at 30 degree angle, in cement concrete foundation of 15 x 15 x 40 cm complete duly painted with one coat of red oxide and two coats aluminium paint complete.(10-6-19) 239 Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete as per specification no SS-AS/DLD(10-6-20) 240 Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75 mm. firmly fixed on provided angle supports with necessary materials complete. (6.044 meters/kg.). 241 Providing printed instruction chart for treating persons suffering from electric shock, printedinEnglish & Marathi and duly laminated complete.(10-6-22) 242 Providing pair ofdulytestedrubber hand glovesas per IS :47705suitable forworking up to 22 kV supply complete.(10-6-23) 243 Supplying standardfirst aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes)(10-6-24) 244 Supplying and fixingPVC synthetic elastomerelectrically insulating matwith class C insulation conforming to IS: 15652 – 2006 tested having 3mm thickness up to 33 kV 245 Supplying shock proof leather safety shoes of electrical grade of standard size as IS :11226, 14544duly tested, with necessary test certificate from manufacturer.(10-6-28) 246 Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete. 247 Excavating hard murum / stone metal roadby chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.(16-1-6) 248 Makingtransformer plinth (1.5 x 1.5 x 1.5) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly plastered by 12 mm thick including watering etc complete. 249 Makingcement concrete foundation including excavation(60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal,45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles)(16-3-4) 250 Making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (pole muffing or any other purpose).(16-3-7) 251 MSEDCL Charges 252 Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB(5-5-4) 253 Supplying and erecting SS enclosure for MCCB suitable for above 250 A up to 800A MCCB.(5-11-19) 254 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core300 sq. mm. aluminiumconductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 255 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. 256 Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification no. EA-EP(9-1-1) 257 Supplying, erecting, testing and commissioning of diesel generating set with alternator of 250 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply,a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 42.30 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 425 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspectoras per specification no. GEN-DG 258 Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 200 kVA up to 250 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF. 259 Excavating hard murum / stone metal roadby chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.(16-1-6) 260 Making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (pole muffing or any other purpose).(16-3-7) 261 Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi strandedcopper Industrial cable for voltage grade up to 1.1 kV(1-3-14) 262 Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2. 263 Supplying and erecting three phase, 415V, street light control panel up to the max load of 6kW, TPN MCB 40A,powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up,auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protectionon provided iron frame / CC foundation.(5-2-5) 264 Supplying, erectingandmarking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kAin provided distribution board as per specification no. SW-SWR/MCB(5-3-1) 265 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core6sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 266 Supplying and laying (including excavation)of suitable width & depth up to 90 cm) 50 mmoutside dia. double wall corrugatedpipes(DWC) ofHDPE for enclosing cable below ground/road surface, to required depth complete.(7-6-9) 267 Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL 268 Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT(8-2-21) 269 Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT 270 Providing earthing with galvanizediron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. covercomplete with all materials, testing & recording the results asper specification no. EA-EP(9-1-3) 271 Providing pipetype earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rodcomplete with all materials testing and recording the results as per specification no. EA-EP(9-1-4) 272 Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clampsfixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.(9-2-3) 273 MakingM- 20 grade reinforced cement concretefoundation by considering the safe soil bearing capacity at site as 10 T/sq.mat 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). 274 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core10sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 275 Supplying, installation, testing and commissioning of booster fire pump[BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of7.5 kW or of suitable kW capacityfor manual/automatic operation and consisting of following :(a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation onwith IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d)Erected on provided suitable size cement concretefoundation duly plastered with anti vibration pads with perfect aligning, properlevelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP 276 Supplying and erectingG.I. pipe‘C’ class ERW25 mm dia with necessary fittings complete asper specification no. FF-PP 277 Supplying and erectingG.I. pipe‘C’ class ERW50 mm dia with necessary fittings complete asper specification no. FF-PP 278 Supplying and erectingG.I. pipe‘C’ class ERW65 mm dia with necessary fittings complete asper specification no. FF-PP 279 Supplying and erectingG.I. pipe‘C’ class ERW75/80 mm dia with necessary fittings complete asper specification no. FF-PP 280 Supplying and erecting G.I. pipe‘C’ class ERW100 mm dia with necessary fittings complete asper specification no. FF-PP(13-6-6) 281 Supplying and erecting G.I. pipe‘C’ class ERW150 mm dia with necessary fittings complete asper specification no. FF-PP(13-6-7) 282 Providing G.I. pipe‘C’ class ERW200 mm dia with necessary fittings complete asper specification no. FF-PP(13-6-8) 283 Providing coating of bitumen paint &4mm thick wrapping for underground 150 mm ring main of fire fighting system.(13-6-10) 284 Supplying and erecting 100 mm dia cast iron foot valve ball type/flap typewith strainer for negative suction complete asper specification no. FF-VL/FV(13-7-2) 285 Supplying and erecting 100mm dia.castiron double flange sluicevalvecomplete with PN16 pressure rating, asper specification no. FF-VL/SV(13-7-14) 286 Supplying and erecting 150mm dia.castiron double flange sluicevalvecomplete with PN16 pressure rating, asper specification no. FF-VL/SV(13-7-15) 287 Supplyinganderecting200mm dia.castiron double flange sluicevalvecomplete with PN16 pressure rating, asper specification no. FF-VL/SV 288 Supplying and erecting 100 mm diacast iron double flange NRV complete with PN16 pressure rating, asper specification no. FF-VL/NRV(13-7-24) 289 Supplying and erecting 25 mmdiagunmetal gatevalvecomplete with PN16 pressure rating, asper specification no. FF-VL/GV(13-7-32) 290 Supplying and erecting stainless steel single outlethydrantvalve fitted with necessary accessories complete asper specification no. FF-VL/HV(13-7-35) 291 Supplying and installingone piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000litres fitted with necessary accessories complete asper specification no. FF-FFA/PT(13-8-1) 292 Supplying and installingwall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose)along with necessary accessories complete asper specification no. FF-FFA/HV(13-8-2) 293 Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe,15m inlength, fitted with necessary accessories complete asper specification no. FF-FFA/RRL(13-8-4) 294 Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzlecomplete as per specifications no. FF-FFA/NZ(13-8-8) 295 Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia, for supplying water in fire tank complete asper specification no. FF-FA/FMC(13-8-11) 296 Supplying and erecting 300 mm dia 1.5min heightair vessel / tankfabricated from min 5mm thick M.S. sheet complete asper specification no. FF-FFA/ACT(13-8-12) 297 Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I.coupling to be fitted on top of air vessel or on wet riser complete asper specification no. FF-FFA/ARV(13-8-13) 298 Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete asper specification no. FF-FFA/PG(13-8-14) 299 Supplying and erecting 12/15 mm dia pressureswitchwith provided isolationvalve,G.I. nipple, elbow, etc complete asper specification no. FF-FFA/PS(13-8-15) 300 Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer diawith required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP(13-8-16) 301 Supplying and erecting M.S./CRCA cabinet for housing single hydrant valveof size ( 400 x 400 x 400)mm or hose pipe boxof size (600 x 600 x 200)mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mmhaving front doors with viewing glass of size (200x150) mmandlockingarrangement with necessary fixingmaterialsuch as rubber biddingetc. dulypainted in post box red colour( Code 538 of IS 5)(13-8-18) 302 Supplying and erecting M.S./CRCA cabinet forhousing FireBrigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet andangleiron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8 x 6) andlocking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)(13-8-19) 303 Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½) dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR. 304 Supplying, erecting, testing and commissioning ofvane type water flow detector75/80 mm dia. with1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.(13-12-2) 305 Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.(13-15-1) 306 Supplying, installing, testing and commissioning ofmanual call point (Pill box) with break glass push button andflip abort switch or agent release switch in metal enclosure complete asper specification no. FF-FAAS/MCP(13-9-7) 307 Supplying, installing, testing and commissioning ofhooters having high (100dB @ 1m) and low (94dB @ 1m) volume setting, group addressing facility allowing multiple sounders to be activated with CRCA enclosure complete asper specification no. FF-FAAS/HTR(13-9-8) 308 Supplying, installing, testing and commissioning ofFRLSXLPE armouredcable 2 core1.5 sq.mm. copper conductorcomplete erected on wall/ ceiling complete asper specification no. CB-LT/CU(13-9-10) 309 Supplying, installing, testing and commissioning of2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories , 16x2CharacterLCDDisplay, provision for zone wise contact and beep sound alarm, suitable to operate on 120-220 V AC,0 - 49 Deg C,93 ± 2 Percentage RH (non- condensing) at 32± 2 Deg C complete asper specification no. FF-FAAS/FACP(13-9-14) 310 Supplying, erecting, testing and commissioning of120 W amplifiersuitable to operate on 230VoltsA.C. / 12VoltsD.C. supply complete asper specification no. FF-PA/AFR(13-11-1) 311 Supplying, erecting, testing and commissioning of15 to 30 Watts soundcolumn or ceiling mounted complete asper specification no. FF-PA/SOC(13-11-2) 312 Supplying, erecting, testing and commissioning ofstand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metreshielded cable and 3 Pin Professional XLR Connector, stereo jack complete asper specification no.FF-PA/MIC(13-11-3) 313 Supplying, erecting, testing and commissioning ofrust free microphone floor stand of chrome plating/powder coating or S.S. material , 500 mm to 1500 mmheight and sturdy mechanism ensuring trouble free movement complete.(13-11-4) 314 Supplying, erecting, testing and commissioning ofrust free microphone table stand of chrome plating/powder coating or S.S. material,up to 500 mm height and suitable base for sturdy mechanism ensuring trouble free movement complete.(13-11-5) 315 Supplying, erecting, testing and commissioning of2 core shielded cable complete asper specification no.FF-PA/MCC(13-11-6) 316 Supplying, erecting, testing and commissioning of1.5 sq. mm speaker wire complete.(13-11-10) 317 Supplying, installation, testing and commissioning of 220/250Volts, single phase, 50 Hz Siren of 3.25 km range (Diametrical),horizontaldoublemountingtype of0.5 HP 6000 RPMon C. C.foundation complete as per specification no. SRN-AS/SM 318 Supplying and erecting ABC powder type fire exitinguisher as per IS: 13849/15683 of 6 kg capacity with necessary clamp for erection on wall (Non-CSR) 319 Supplying and Installation auto glow (Viewing up to 15 Mtr length) fire signages in PVC/Vinyl 4/6 mm thick sheet or as per sample approved by client viz fire doors, fire hose box, fire & electrical safety etc. Size 300 mm X 100 mmas per IS 12349-1988 320 Supplying and Installation auto glow (Viewing up to 15 Mtr length) fir signages in PVC/Vinyl 4/6 mm thick sheet or as per sample approved by client viz fire doors, fire hose box, fire & electrical safety etc. Size 450 mm X 100 mm as per IS 12349-1988 321 Providing and fixing of Emergency Exit Lights LED Beam-II with exit high glow LED White lamps working on battery 12 V 7.6 Ah for duration 4-5 hours (approx) wattage of LED lamp is 26 watt each 2 Nos. of lamp total wattage 52 Watts Weight of unit will be 5.4 kg input voltage 220 V AC 50 Hz Output Volatge 12 V DC the outer cabinet is powder coated, for safety purpose DC & AC fuse system is given in unit as per IS 9583-1981 322 Supplying and erectingHMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. 323 Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. 324 Supplying and erecting 20mm dia. corrugated flexiblepolypropylene conduit 325 Supplying and erecting 10m HDMI cord low voltage grademinimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.. 326 Supplying and installingcat-6 cable suitable for networking as per specification no. WG-COC/NC 327 Supplying, fixing, and configuring 24 ports, POE switch in provided rack as perspecification No. WG-NWC/ENS(1-11-3) 328 Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC. 329 Supplying and fixing POE adaptor to provide DC supply to ethernet devices as per specification No. WG-NAS/PEA 330 Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK 331 Supplying, erecting, testing and commissioning of single phase input & 1 phase output 1 kVA capacity online pure sine wave UPS, with backup time of 1 hrs. PWM & IGBT based,with 0.8 to unity output pf complete with all protections as per specification no. AP-UPS 332 Supplying and erecting 12V/100Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete.(3-8-12) 333 Supplying & erecting of High definition 4/5 Megapixel IP IR Dome Camerawith following featuresImage Sensor : minimum 1/2.8 Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520Video Compression : H.264, H.265 or higher, at least Three individuallyconfigurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View :2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102°6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65°Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White,0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain,white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D DigitalNoise Reduction, Automatic White Balance, Automatic Gain Control, BacklightCompensation, Highlight Compensation.Events : Privacy Masking, Motion detection, Scene change detection, Facecapture, Video tampering, audio exception detection, Region entrance detection,Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X,digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed,FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP,SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour,SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalentBIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.duly erected in position on wall/ceiling/false ceiling/provided pole (mountingheight not more than 5 meter) etc with all accessories etc complete as perspecification no. CCTV-CAM. 334 Supplying & erecting of High definition 4/5 Megapixel IP IR Bullet Camerawith following featuresImage Sensor : minimum 1/2.8 Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520Video Compression : H.264, H.265 or higher, at least Three individuallyconfigurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View :2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102°6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65°Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White,0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain,white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D DigitalNoise Reduction, Automatic White Balance, Automatic Gain Control, BacklightCompensation, Highlight Compensation.Events : Privacy Masking, Motion detection, Scene change detection, Facecapture, Video tampering, audio exception detection, Region entrance detection,Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X,digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed,FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP,SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour,SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalentBIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.duly erected in position on wall/ceiling/false ceiling/provided pole (mountingheight not more than 5 meter) etc with all accessories etc complete as perspecification no. CCTV-CAM 335 Supplying, installing, testing & commissioning of 64/80 Ch Network VideoRecorder (NVR), suitable connect Min. 64 IP Cameras, up to 5 MegapixelResolution, with HDMI 1/VGA 1 and HDMI 2/VGA 2 outputs provided,Atleast one HDMI output of 4K resolution, atleast one VGA output with outputup to 1920 × 1080,Support H.265 or higher, H.264, MJPEG,Supports Redundant Dual Power,Incoming Bandwidth 320 Mbps with minimum 8 SATA Hard Disks, ANRTechnology,8 SATA interfaces for 8 HDDs and capacity of each HDD up to 8TB,minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps selfadaptiveEthernet interface,support multi brand network Cameras,ONVIF conformance,Multiple network monitoring: Web viewer .support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS,iSCSI, UPnP™, HTTPS.RoHS, UL, CE, FCC certified.duly erected in provided U Rack with wiring connections, tagging andprogramming etc. complete as per specificationss no. CCTV-NVR 336 Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Portof NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64,Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected inposition in provided NVR as per specification no. CCTV-HDD 337 Supplying & erecting 43 professional LED display with 1920*1080 (FullHD) Display, suitable for 16/32 channel NVR and following featuresBrightness: minimum 500 Cd/m2Contrast Ratio: minimum 1000:1Viewing angle: 178/178 deg.Response time: maximum 8 msInputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle dulyerected on wall or table top with standard accessories like wall mount stand andwiring connections etc. complete as per specifications no. CCTV-MON 338 Supplying and erecting HMS PVC conduitFRLS grade 20 mm dia. with PVC accessorieson wall / ceiling as per specification No: WG-MA/CON(1-2-3) 339 Supplying and erecting mains with 2x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-5) 340 Supplying, installing, testing and commissioning of15 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 45 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnectingwires / cables up to solar ON GRIDinverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card/chip for 5 yearsincluding net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG(4-5-4) 341 Supplying and erecting switch disconnector fuse (SDF) switch 415V up to 63A, open execution, four pole AC23 A rated with terminal shrouds on both sides and phase barriers along with telescopic shaft for depth adjustments and door interlock and padlock complying to IS/IEC 60947-3 Part-1/3HRC - DIN type fuse,insulation voltage 1000 Vfor enclosing in panel with rotary handle for ON / OFF operation (without HRC fuse)(5-1-17) 342 Supplying and erecting porcelain/epoxy bus bar support complete erected in provided M.S. box for 100A(5-10-26) 343 Supplying and erecting iron work, sheet metal work consisting of CRCAsheets, varioussectionsofiron,plates, chequeredplates,rods,bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority.(6-1-19) 344 Supplying and erecting static energy meter with 3 x 240V 50 Hz. AC supply 10 to 60 A, ISI mark,accuracy class 1.0 with backlit LCD display, (Measuring and display Trivector, V, I, kW, PF, Hz, Last month history of kWh andMD in kW) with special features like TOD, Tamper logging, Optical Communication Port & Display in absence of Power &with transparent hinge type box completeerectedonpolished teak woodboardduly wiredwithrequiredsizeof weather proofPVC wires duly testedby electric supply company.(6-3-3) 345 SupplyinganderectingAC three phase HT CT multifunctionnet meterDLMS compliance of accuracy class 0.5, 3x 63.5V, 50Hz,with backlitLCD display, optical port& RS 232 port( measures import kWh, kVAh, export kWh, kVAh, net kWh, kVAh, V, I, kW, 6 months history of energy, load survey, TOD, tamper detection & logging, power ON/OFF events, instantaneous parameters of rating 1/5A with display in absence of power)with wiring connections and mountinghardwareonprovidedpanelscompletewith calibration certificate from manufacturer. 346 Supplying, installtion & marking of surge arrestor/ surge protection device at the sub main distribution board after the incoming breaker of type 2 tested forImax 40 kAfor three phase and neutralwith compliance to IEC 61643-11 as per specification no. CP-SPD(6-6-6) 347 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 70sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL(7-1-33) 348 Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification no. EA-EP(9-1-1) 349 Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results asper specification no. EA-EP(9-1-2) 350 Supplying and erecting aluminium strip of high purity required sizes used for earthing on wall and/or any other purpose with necessaryaluminiumclampsfixed on wall painted with bituminous paint with joints required as per specification no EA-EP.(9-2-1) 351 Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clampsfixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.(9-2-3) 352 Supplying and erecting conventionalspike typeair termination suitable to carry lightning stroke made up of heavy gauge40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipeerected on provided foundation complete.(9-3-1) 353 Making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (pole muffing or any other purpose).(16-3-7) 354 Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.(1-6-1) 355 Supplying and erecting modular type switch 16Aduly erected on provided plate and box with wiring connections complete.(1-6-2) 356 Supplying and erecting modular type 3 pin 6 / 16Amultisocket with safety shutter,duly erected on provided plate and box with wiring connections complete.(1-6-11) 357 Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected.(1-6-29) 358 Supplying and erecting bulk head LED fittingmax. 10Wwith high transitivity diffuser withsystem lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg.,THD<10%,p.f. >0.95, operating range of140-260V, in built surge protection of 2.5 kV, Life class of50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.(2-1-15) 359 Supplying, erectingandmarking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-7) 360 Supplying, erectingandmarking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kAin provided distribution board as per specification no. SW-SWR/MCB(5-3-13) 361 Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.(5-4-13) 362 Supplying, fixing, and commissioning 2 pole, RCBO 6/10/16/20/25A,with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection,with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO(5-6-9) 363 Supplying, fixing, and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection,with 30/100/300 mA sensitivity and short circuit and earth leakage trip indicationas per specification no SW-RCCB/RCBO(5-6-13) 364 Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 4 sq mm copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU(7-2-9) 365 Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU(7-2-33) 366 Supplying, installing & testing maintenance free earthing comprising of Electrode of 17.2 mm diameterLow Carbon Steel with 250 micronmolecular copper bonded earthing rod ofLength 3malong with 25 kg Carbonbased environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI(9-1-5) 367 Supplying and erecting annealed bare copper wireof high purity of required sizesused forearthing onwall with necessarycopperclampsfixedon wall/cable/conduitwithscrews complete.(9-2-4) 368 SITC of Electric Traction Passenger Lift with · Rated capacity :- 8 Passenger/544Kg· Floors :- B+G+8 floor (10 Stops/10 Landings)· Travel :- 21 to 32 mtrs· Location of Lift Machine:- MR/MRL· Rated speed :- 1.5mps VS· Car/Landing door clear opening of 800 mm wide x 2000 mmhigh· Clear Car size of 1300 mm wide x 1100 mm deep x 2250mm high· Lift shaft available having clear size of .1900 mm wide x 1900 mmdeep, 1500 mm Pit depth, 4250 mm Overhead.· Doors type :- COPO/TOPO Doors with frame made from SS 304 gradesolid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landingdoors with SS door architraves/frames The lift doors shall have minimum 1hour fire rating (with submission of necessary valid test certificate issuedby NABL accredited or Independent test laboratory).· Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of1.5mm, thick with hairline finish with frame made from MS girders, bracing ofadequate size with minimum safety factor of 5, with Toe Guard Apron, withnecessary false ceiling with adequate LED lights, blower/fan for ventilation & SSchequered plate flooring, handrails, mirror, emergency light etc. The lift carinterior design shall be done as per the directions of engineer in charge. (CSR Item no.17.1.13) 369 SITC of Electric Traction Passenger cum Stretcher/Hospital Liftwith · Rated capacity :- 15 Passenger/1020Kg· Floors :- B+G+8 floor (10 Stops/10 Landings)· Travel :- 21 to 32 mtrs· Location of Lift Machine:- MR/MRL [applicable for PassengerLift with MRL only & Stretcher/Hospital Lift with MR & MRL]· Rated speed :- 1.5mps VS· Car/Landing door clear opening of 800/900/1000 mm wide x2000mm high· Clear Car size of 1000 mm wide x 2400 mm deep x 2250mm high· Lift shaft available having clear size of 1800 mm wide x 3000 mmdeep,1500 mm Pit depth, 4250 mm Overhead· Doors type :- COPO/TOPO Doors with frame made from SS 304 gradesolid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landingdoors with SS door architraves/frames The lift doors shall have minimum 1hour fire rating (with submission of necessary valid test certificate issuedby NABL accredited or Independent test laboratory).· Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of1.5mm, thick with hairline finish with frame made from MS girders, bracing ofadequate size with minimum safety factor of 5, with Toe Guard Apron, withnecessary false ceiling with adequate LED lights, blower/fan for ventilation & SSchequered plate flooring, handrails, mirror, emergency light etc. The lift carinterior design shall be done as per the directions of engineer in charge. (CSR Item no.17.1.17) 370 For Lift having 800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOPs with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travellingcables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. 371 For Lift having 1000mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOPs with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travellingcables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. 372 Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC(1-1-9) 373 Supplying and erecting mains with 2x2.5 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2) 374 Supplying and erecting green colour earthing with 1x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2) 375 Supplying, installing, testing & commissioning split type variable speed invertertechnology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TRcapacity having ISEER minimum 5.00suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC 376 Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 12mm complete. 377 Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigeranthaving 22SWG thickness and inner dia/size 16mm complete. 378 Supplying, erecting, testing and commissioning of 10HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. 379 Supplying, erecting, testing and commissioning of 12HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. 380 Supplying, erecting, testing and commissioning of 14HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. 381 Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 0.6TR - 0.8TR ( 229 to 358 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete. 382 Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.3TR (421 cfm) to 1.7TR (586 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anticorrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete. 383 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 2.0TR (618 cfm) to 2.3TR (671 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. 384 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR ( 1100 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. 385 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.0TR (1100 cfm) to 3.2TR (1165 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. 386 Supplying and erecting circular flexible/rigid PVC pipe duct of size 100mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves / dampers, filters at position complete. 387 Supplying and erecting circular flexible/rigid PVC pipe duct of size 150mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves/dampers, filters at position complete. 388 Supplying, erecting, testing and commissioning centralised programmable remote control panel (HMI) touch manager controls minimum 16 system of 64 ODUs can be controlled and up to 992 IDUs can be individually mounted and controlled indoor units having colour min 200mm size LCD touch panel, yearly schedule, power proportional distribution function, temperature limitation, history function complete erected on wall integrated with provided fire alarm system. 389 Supplying and installation of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system. 390 supplying, laying/fixing, testing and commissioning ofappropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. 391 supplying, laying/fixing, testing and commissioning ofappropriate nominal refrigerant copper pipe of 22.2mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiation with OEM standards of VRV/VRF air conditioning system complete. 392 supplying, laying/fixing, testing and commissioning ofappropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. 393 Supplying, laying / fixing, testing and commissioning of ofappropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.(3-11-94) 394 Supplying, laying / fixing, testing and commissioning of ofappropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.(3-11-95) 395 Supplying, laying / fixing, testing and commissioning of ofappropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.(3-11-96) 396 supplying, laying/fixing, testing and commissioning ofappropriate nominal refrigerant copper pipe of 6.4mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. 397 Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline/cabint exhaust air fan inlet unit having 5000 cfm capacity with maintaining the static pressure minimum 65mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.With fabrication and iron work. 398 Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline/cabint exhaust air fan inlet unit having 3000 cfm capacity with maintaining the static pressure minimum 65mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.With fabrication and iron work. 399 Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline/cabint exhaust air fan inlet unit having 2500 cfm capacity with maintaining the static pressure minimum 65mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.With fabrication and iron work. 400 Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline/cabint exhaust air fan inlet unit having 1000 cfm capacity with maintaining the static pressure minimum 65mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.With fabrication and iron work. 401 Supplying & erecting tile type modular diffuser made from aluminium sheet with powder coated matching to the ceiling shade for provided supply and return air complete. 402 Supplying and erectingelastomeric nitrile rubber / foam tube type sleeves forcoating and insulating on provided PVC / copper pipes having 9 mm thickness and inner diameter / sizes 28 mm for solar water heater/AC system. 403 Supplying and erecting 25/32 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.2 mm conforming to IS 15778 (CTS Series)with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC 404 Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.(5-4-13) 405 Supplying, fixing, and commissioning 2 pole, RCBO 6/10/16/20/25A,with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection,with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO(5-6-9) 406 Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection,with 30/100/300 mA sensitivity and short circuit and earth leakage trip indicationas per specification no SW-RCCB/RCBO 407 Supplying and erecting GI sheet 0.6 mm (24 SWG) having zinc coating of 120 microns withgalvanization process compliance to IS 2629:1985 tobeused for fabricationofboxespanelboardsetc. including cutting, bending, drilling, welding, riveting etc. and paintingwithone coat of red leadpaint and 2 coats of enamel paint.(6-1-2) 408 Supplying and erecting GI sheet 0.8 mm (22 SWG) having zinc coating of 120 microns withgalvanization process compliance to IS 2629:1985 tobeused for fabricationofboxespanelboardsetc. including cutting, bending, drilling, welding, riveting etc. and paintingwithone coat of red leadpaint and 2 coats of enamel paint.(6-1-3) 409 Supplying and erectingGI sheet 1.25 mm (18 SWG)having zinc coating of 350 microns withgalvanization process compliance to IS 2629:1985 tobeused for fabricationofboxespanelboardsetc. including cutting, bending, drilling, welding, riveting etc. and paintingwithone coat of red leadpaint and 2 coats of enamel paint. 410 Supplying and erecting iron work, sheet metal work consisting of CRCAsheets, varioussectionsofiron,plates, chequeredplates,rods,bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority.(6-1-19) 411 Supplying, erecting& terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core6 sq. mm. copperconductor completeerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU 412 Supplying, erecting& terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core10 sq. mm. copperconductorcompleteerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU
Contract Date: Jul 31, 2025 Contract Value : 16.94 Crore
Local Bodies No of Bidders 3
Maharashtra View Result →
Contract Date: Ref. Documents Contract Value : 1.98 Crore
Boards / Undertakings / PSU No of Bidders 4
22.
Defence #6975554 AOC
Repair/Maintenance Of Dg Sets, Eot Crane, Incinerator And Connected Work Under Ge (A) Suratgarh , Periodical Maintenance Of 1250 Kva Capacity Dg Set At 184 Mh (Make-Cummins) And Ensuring Smooth Functioning Of Dg Set Complete All As Specified And As Directed. Notes :- (I) All Necessary Spare Parts Required For Maintenance Of Dg Set To Be Provided By The Contractor Are As Under :- (A) Bypass Filter Element With O Ring (B) Oil Filter Element With O Ring (C) Air Filter Element Inner And Outer With O Ring (D) Fuel Filter Element With O Ring (E) Fan Belt (If Required). (Ii) The Rate Quoted Shall Include The Maintenance & Repairs And Not Inclusive Of Major Repair / Overhauling Of Dg Set. In Case Of Any Dispute Between Contractor & Ge Regarding This Aspect, The Decision Of Accepting Officer Shall Be Final & Binding. (Iii) All Spare Parts For Repair Are To Be Procured From Manufacturer’S Authorised Dealer Only. (Iv) All Tools, Testing Instruments Are To Be Arranged By The Contractor Including Necessary Transport. (V) The Fixing/Labour Element For Items Catered Here-In-After As “Supply Only” Shall Be Deemed To Be Included In The Quoted Rate Of This Item. , All As Per Serial Item No 1.00 Here-In-Before But 625 Kva Capacity Dg Set At 184 Mh (Make-Cummins) Complete All As Specified And As Directed. , All As Per Serial Item No 1.00 Here-In-Before But 180 Kva To 320 Kva Capacity Dg Set At Klp Pump House (Make-Cummins), Raj Canal Pump House (Kirloskar) And Klp Filteration Plant (Make-Cummins) Of Dg Sets And Ensuring Smooth Functioning Of Dg Set Complete All As Specified And As Directed. , All As Per Serial Item No 1.00 Here-In-Before But 100 Kva To 160 Kva Capacity Dg Set At Ilp Sig Centre (Make : Ashoka Leyland), Sasf Birdhwal (Make : Cg), Lt Ad Pump House And Map Ph-Ii Pump House (Make Kirloskar Oil Engine Ltd), Stp Ph-I (Make : Kirloskar Oil Engine Ltd) And New Filtration Plant Klp Ph And Stp Map Ph-Ii (Make : Kirloskar) Of Dg Sets And Ensuring Smooth Functioning Of Dg Set Complete All As Specified And As Directed. , All As Per Serial Item No 1.00 Here-In-Before But 7.5 Kva To 63 Kva Capacity Dg Set At 85 Armd Regt Ksp (Make : Cummins), Stp 14 Mech And Intermediate Pump House (Make : Kirloskar), 18 Kumaon Ph, 9 Dh Ph, 815 Cetc A, B & C Location, Nkt Ascon Node (Make : Kirloskar Oil Engine Ltd), Fol Depot (Make : Cummins), Ashoka Auditorium (Make : Ashoka Leyland), Map Phase-I Pump House, Old Klp Pump House, Vaidya Marg, Sunder Ji Marg, Near 6(I) Offrs Mess And Inf Bn Ph (Make : Kirloskar Oil Engine Ltd) Of Dg Sets Andensuring Smooth Functioning Of Dg Set Complete All As Specified And As Directed. , Supply Only Distilled Water To Be Filled In Batteries Complete All As Specified And As Directed. , Supply Only Ignition Switch With Key For Dg Sets Of Any Capacities Complete All As Specified And As Directed. Make : As Per Existing / Recommended By Oem. , Supply Only Battery Cable Of Size 35 Sqmm Pvc Insulated Multi Stranded Copper Conductor Single Core Cable (Isi Marked) With Necessary Lugs Complete All As Specified And As Directed. , Supply Only Coolant For Top Up Radiator Of Dg Set Complete All As Specified And As Directed. Make & Grade : As Per Existing / Recommended By Oem. , Supply Only Flexible Braided Hydraulic Hose 5/8 Dia X 600 Mm Length Including Suitable Check Nuts & Washers For Dg Set Complete All As Specified And As Directed. Make : As Per Existing / Recommended By Oem. , S&F In Replacement Electronic Automatic Voltage Regulator (Avr) Of 100 V, 8 Amps Suitable For Dg Set Of Capacity Upto 100 Kva Including Necessary Terminal’S Sleeves Etc As Required At Site Of Any Type And Make Of Dg Sets, Complete All As Specified And As Directed. Note : Make Of Avr Shall Be Same As Supplied By The Dg Set Manufacturer With New Dg Set. , M&L For Electronic Automatic Voltage Regulator (Avr) Of 50 V, 16 Amps Suitable For Dg Set Of Capacity From 100 Kva To 320 Kva Including Necessary Terminal’S Sleeves Etc As Required At Site Of Any Type And Make Of Dg Sets, Complete All As Specified And As Directed. Note : Make Of Avr Shall Be Same As Supplied By The Dg Set Manufacturer With New Dg Set. , Supply And Fixing In Replacement Solenoid Switch Suitable For Any Capacity Dg Set Complete All As Specified And As Directed. Make : As Per Existing / Recommended By Oem. , Supply Only Lubricant Oil Sae 20 W - 40 For Top Up And Filling Up The Oil In The Sump After Completely Flushing The Old Oil Out Of The Tank And Cleaning Of The Tank For Fresh Filling In Dg Sets Complete All As Specified And As Directed. Make : Castrol / Power Supreme , Supply And Fixing In Replacement Battery Terminal Heavy Duty Made Of Brass With Bolts And Washers All As Required At Site Complete All As Specified And As Directed. , M&L For Taking Down Unserviceable Fuel Injection Pump From Any Type/ Capacity Dg Set, Carrying To Workshop For Repairing Including Necessary Spares And Calibration, Refixing The Same Duly Repaired To Its Original Position And Testing For Its Serviceability At Site, Complete All As Specified And Directed. , S&F In Replacement Self Starter Assembly For Dg Set Of 110 To 320 Kva, 24 Volts Dc Including Testing Complete All As Specified And As Directed. Make : Lucas Tvs Or As Per Existing / Recommended By Oem. , S&F In Replacement Self Starter Assembly For Dg Set Of 7.5 To 100 Kva, 12 Volts Dc Including Testing Complete All As Specified And As Directed. Make : Lucas Tvs Or As Per Existing / Recommended By Oem. , M&L For Taking Out Unserviceable Alternator From 63 Kva To 250 Kva Capacity Dg Set, Transportation To Workshop For Repair, Rewinding With Existing Size Copper Conductor Wire, Varnishing, Drying, Refixing, Connecting And Testing, Complete All As Specified And As Directed. , S&F In Replacement Rubber Hose Set For Upto 320 Kva Capacity Dg Set Radiator, Complete All As Specified And As Directed. Make : As Per Existing / Recommended By Oem. , S&F In Replacement Complete Plc System Upto 320 Kva Dg Set As Per On Ground Existing Make Complete All As Specified And As Directed. , M&L For Making Smooth Surface By Scratching The Old Paint And Rubbing With Emery Paper, Filling Putty In Dents, Where Required, And Applying Two Coats Of Synthetic Enamel Smoke Grey Paint Over A Coat Of Red Oxide Primer With Spraying Process Including Writing Of Sm / Mes Number On Dg Set For 20 Kva To 100 Kva Capacity Dg Set, Complete All As Specified And As Directed. , M&L For Making Smooth Surface By Scratching The Old Paint And Rubbing With Emery Paper, Filling Putty In Dents, Where Required, And Applying Two Coats Of Synthetic Enamel Smoke Grey Paint Over A Coat Of Red Oxide Primer With Spraying Process Including Writing Of Sm / Mes Number On Dg Set For 110 Kva To 1250 Kva Capacity Dg Set, Complete All As Specified And As Directed. , M&L For Opening/Dismantling Of 20 Kva To 320 Kva Capacity Dg Set, Disconnecting All Connections From Panel To Terminal Box, Repair/Replacing The Field Coils To The Alternator, Refixing The Field Coils To The Alternator After Drying The Varnish And Making The Electric Connections To Terminal Box With Proper Brass Nut Bolts And Washers, Testing And Commissioning To The Entire Satisfaction Of Engineer-In-Charge, Complete All As Specified And As Directed. , M&L For Dismantling Radiator From Engine, Transporting It To Work Shop, Repair Of Leakage Pipes, Cleaning The Radiator With Cleaning Agents, Re-Assembling The Engine Completely To Entire Satisfaction Of Engineer-In-Charge, Complete All As Specified And As Directed. , S&F Stainless Steel Butt Hinges For Generator Canapoy/ Enclosure Having Minimum Thickness 5Mm And Size 75Mmx100mm With Nut And Bolt Fixing Arrangement Complete All As Specified And As Directed. , Inspection/Checking Of Amf Panel Of Dg Set Of Capacity 7.5 Kva To 100 Kva Installed At Various Installations Of Any Make And Shape And Rectifying The Defects, Replacement Of Unserviceable Parts As Required At Site And Cleaning Of Amf Panel As Detecting During Inspection Or Pointed Out By Representative Of Department And Carry Out Maintenance Complete All As Specified And As Directed. Note :- Spare Parts Required For Maintenance Provided By The Contractor. , Inspection/Checking Of Amf Panel Of Dg Set Of Capacity 110 Kva To 320 Kva Installed At Various Installations Of Any Make And Shape And Rectifying The Defects, Replacement Of Unserviceable Parts As Required At Site And Cleaning Of Amf Panel As Detecting During Inspection Or Pointed Out By Representative Of Department And Carry Out Maintenance Complete All As Specified And As Directed. Note :- Spare Parts Required For Maintenance Provided By The Contractor. , Inspection/Checking Of Amf Panel Of Dg Set Of Capacity 625 Kva To 1250 Kva Installed At Various Installations Of Any Make And Shape And Rectifying The Defects, Replacement Of Unserviceable Parts As Required At Site And Cleaning Of Amf Panel As Detecting During Inspection Or Pointed Out By Representative Of Department And Carry Out Maintenance Complete All As Specified And As Directed. Note :- Spare Parts Required For Maintenance Provided By The Contractor. , Supply And Fixing In Replacement 4 Pole Power Contactor With Ac Coil 160 Amps, 3 Phase 415 Volt, 50 Hz, 2 No + 2 Nc With Integrated Auxiliary Contacts Suitable For Amf Panels Complete All As Specified And As Directed. Make : Legrand/ Havells / Ge / L&T / Siemens , Supply Only Cranking Relay 12/24 Volts Dc 8/11 Stage Suitable For Amf Panels Complete All As Specified And As Directed. Make : Eagle Man Or As Per Existing / Recommended By Oem. , Supply And Fixing In Replacement Elite 500 Multi Function Meter, 35-500 Vac (L-L), Ib 1 To 5 Amps, Imax 6 Amps, Class 0.5S, Tft, Aux 85-300V Ac 48-300V Dc, Modbus On Rs, Sw Configuration-1, 96X96 Complete All As Specified And Directed. , M&L For Replacement Of Unserviceable / Worn Out Control Wiring Of Amf Panel Of Dg Set Of Capacity Upto 100 Kva With Existing Size Of Cable And Testing Complete All As Specified And As Directed. , M&L For Control Wiring With Single Core Copper Cable Of Size 2.5 Sqmm (Isi Marked) From Amf Panel To Dg Set Complete All As Specified And As Directed. , S&F In Replacement Battery Charger 12 Volt/ 24 Volt 10 A Panel Mounted Operating On 230 Volt Single Phase 50 Hz Supply, By Replacing Unserviceable Charger Complete All As Specified And As Directed. , Inspection/Checking And Repair/Servicing Of Eot Gantry Crane Double Girder Type Track Rail And Load Chain Hook Having Span Of 12.5 Mtr With Traverse Of 60 X 60 Mtr And Lift 6 Mtr Capacity 10 Ton, Carrying Out Necessary Cleaning, Including Greasing Of All Movable Parts, Filling Of Gear Oil, Stripping Down All Other Related Parts Etc, Complete Overhauling Of Crane All As Per Manufacturer’S Instructions Complete All As Specified And Directed. Note : Spare Parts, Gear Oil, Etc Shall Be Measured And Paid For Separately As “Supply Only” Under Respective Items Of Boq. , All As Per Serial Item No 36.00 Here-In-Before But 2 Tone To 5 Ton Capacity Eot Gantry Crane Complete All As Specified And Directed. , M&L For Fault Finding In Control Panel Of Eot Crane 10/5/2 Ton Capacity, Repairing To Control Panel After Finding Out The Faults If Any Including Replacement Of Spare Parts, Rewiring To The Panel Board With Existing Size Stranded Copper Wire Complete All As Per Site Requirement For Smooth Functioning Of Control Panel Including Scraping Out Old Paint, Clean Stain Oily Spot Thoroughly And Paintingexternally And Internally With Two Coats Of Synthetic Enamel Paint By Using Spray Gun (Without Any Damage To Components Inside) Complete All As Directed. Note : Necessary Spare Parts Required For Maintenance Of Eot Crane To Be Provided By The Contractor Are As Under :- (A) Limit Switch (Rotary Type/ Lever Type For Hoisting Motion And L.T., Ct Motion) (B) Thermal Over Load Relay Range 12-32 Amps (C) Step Down Transformer 500 Va Copper Wound 440 To 110/120 Volt Output Double Stage. , M&L For Dismantling And Rewinding Of 3 Hp To 5 Hp Electric Motorwith Supper Enamelled Copper Wire Existing Gauge Including Replacement Of Two Nos Bearings, Insulating Material And Re-Fixing In Position After Necessary Repairs Complete All As Specified & As Directed. Make Of Bearing : Skf / Nbc Make Of Winding Wire : Chetak / Finolex / Emgee / Devidayal / Asian Note : Labour & Transportation For Carry Out Motor To Workshop For Repair And Carry Back After Repair Is Included In The Unit Rate Of The Item. , M&L For Dismantling And Rewinding Of 7.5 Hp To 15 Hp Electric Motorwith Supper Enamelled Copper Wire Existing Gauge Including Replacement Of Two Nos Bearings, Insulating Material And Re-Fixing In Position After Necessary Repairs Complete All As Specified & As Directed. Make Of Bearing : Skf / Nbc Make Of Winding Wire : Chetak / Finolex / Emgee / Devidayal / Asian Note : Labour & Transportation For Carry Out Motor To Workshop For Repair And Carry Back After Repair Is Included In The Unit Rate Of The Item. , S&F In Replacement Remote Control Wire Pvc Copper Conductor 1.5 Sqmm, 16 Core Multi Standard (Isi Marked) Complete All As Specified & As Directed. , S&F In Replacement Hauling Cable Pvc Copper Multi Standard Copper Conductor 10 Sqmm, 3 Core With Cable Loader Complete All As Specified & As Directed. , S&F In Replacement Magnetic Type Brake Assembly For Left Right Motor 3 Hp Complete All As Specified & As Directed. , Repair To Reduction Gear Box Of 10 Ton / 5 Ton Capacity Eot Crane, With & Including Following Repairable Items Complete All As Specified & As Directed :- (A) White Manth Bronze Gear- 01 No. (B) Burm Of Steel- 01 No. (C) Ball Bearing- 04 Nos. (D) Oil Seal- 02 Nos. (E) Gear Oil , M&L In Replacement Of Steel Wire Rope 9Mm Of Having 6X36 Fmc Construction, Complete All As Specified And As Directed. Make:- Usha Martin / Mahadev. (Test Certificate Of Wire Rope Shall Be Submitted By Contractor) , M&L In Replacement Of 11 Kw V.F.D. Drive With D.B.R. Mounted In A Sheet Steel Enclosure Made Out Of M.S. Sheet Not Less Than 16 Swg For 10 Ton Capacity Eot Crane Including Programming Of Drive Complete All As Specified And As Directed. Make:- Delta / Schnieder / L&T , M&L In Replacement Of Push Button Station Made Out Of M.S. Sheet Not Less Than 16Swg Duly Powder Coated Prewired With Following:- (I) Main On-Off Push Button (Off Push Should Be Mushroom Type) With Element. (Ii) Hoist Up & Down Push Button With Selector Switch With Element. (Iii) Left & Right Push Button With Element (Iv) Push Button With Element Of Long Travel Motion Complete All As Specified And As Directed. , M&L For Preparation Of Old Surfaces Of 10/5 Ton Eot Crane Gantry And Garder L.T. (Approx 69 Mtr) And C.T. (Approx 12.5)For Painting With Two Coats Of Existing Colour (Yellow & Grey) Anti Corrosive Paint Of First Quality After One Coat Of Red Oxide Complete All As Specified And As Directed. , Testing (Full Load Test, Deflection Test, Capacity Test, Speed Test And Break Test) And Serviceable Checking Of Each Cranes Of Capacity 02 To 10 Tons And Hoist By Authorised Engineer In Presence Of Engineer-In-Charge, Je (E/M) And User Representative And Generating & Submission Of The Test Certificate With List Of Defects If Any To Be Produced In Duplicate. Note:- The Dummy Load For Load Testing Of Cranes Will Be Arranged By The Contactor An His Own Cost.
Contract Date: Mar 13, 2025 Contract Value : 7.49 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
23.
Defence #6911746 AOC
Tender For Construction Of Esm Complex At Faridabad; 1 SCHEDULE `A PART - I Building is not prepriced by MES and prepriced rates indicates0.00 under column 5 signifies this fact only. 2 Construction of Defence Institutional Complex (DIC)complete withpermanent specification as specified and as shown in drawings. 3 NOTE: Schedule ‘A’ Part IIto IX under Ser No 2.01 to 2.08 are Prepriced by MES. 4 Lump sum price worked out by the Contractor for “ SITE CLEARANCE, EXCAVATION AND EARTH WORK” as listed in Schedule ‘A’Part II 5 Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’Part III 6 Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY as listed in Schedule ‘A’Part IV 7 Lump sum price worked out by the Contractor for SEWAGE DISPOSAL” as listed in Schedule ‘A’Part V 8 Lump sum price worked out by the Contractor for AREA DRAINAGE” as listed in Schedule ‘A’Part VI 9 Lump sum price worked out by the Contractor for “ROAD PATH AND CULVERT ” as listed in Schedule ‘A’Part- VII 10 Lump sum price worked out by the Contractor for“EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’Part - VIII 11 Lump sum price worked out by the Contractor for“EXTERNAL ELECTRIFICATION, DG SET AND LIFT” as listed in Schedule ‘A’Part - IX 12 SCHEDULE `A PART - X MISC ITEMS (B/R & E/M)is not prepriced by MES and prepriced rates indicate 0.00 under column 5 signifie this fact only. 13 INTERNAL ELECTRIFICATION 14 S & F TV socket Jack RJ-45 type complete all as specified and as directed. 15 S & F indoor decorative LED battens integrated type 20 watts 4 feet white fixture and extruded aluminium body, suitable for LED tube 20 Watts, bi pin holder, connector block, incl LED rod 20 watts with all accessries internally wired and connected up with three core copper conductor complete all as specified and as directed. 16 S & F indoor decorative LED battens integrated type 10 watts 2 feet white fixture and extruded aluminium body, suitable for LED tube 10 Watts, bi pin holder, connector block, incl LED rod 10 watts with all accessries internally wired and connected up with three core copper conductor complete all as specified and as directed. 17 Supply and fixingElectric storage type water heater(Geyser) BEE 5 star rated, storage vertical type 25 litres capacity with stainless steel tank ,double insulated with outer cover of fiber glass (plastic ) rated at 240V single phase AC including necessary fitting and fixtureand 2 Nos of 450 mm stainless steel pipe for cold & hot water connection complete including fixing with clamps, brackets, screws etc. and also connecting up complete all as specified and as directed. 18 Supply and fixingceiling fan five star 1400 mm sweep, 230 volts (single phase) and provisioning of flexible copper cord three core PVC sheathed of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan for giving connectioncomplete all as specified and as directed by the Engineer-in-Charge. 19 Supply and fixing Plastic body exhaust fanof size 300 mm sweep, 1400 RPM, 230 volts single phase AC supply with louvers complete with, bolt, nuts and washers, suitably embedded in the wall including making suitable opening and provisioning of flexible copper cord three core PVC sheathed of size 23/0.0076 for giving connectionfrom suitable electric point to exhaust fan complete all as specified and as directed by the Engineer-in-Charge. 20 Supply and fixing Metal body exhaust fanof size 450 mm sweep, 1400 RPM, 230 volts single phase AC supply with louvers complete with, bolt, nuts and washers, suitably embedded in the wall including making suitable opening and provisioning of flexible copper cord three core PVC sheathed of size 23/0.0076 for giving connectionfrom suitable electric point to exhaust fan complete all as specified and as directed by the Engineer-in-Charge. 21 S&F sheet metal enclosures Vertical type double door (VTPN) MCCB incomer, withacrilic door, cement spill protector for MCCB Triple pole and neutral, 4 ways, IP-43 protection, with 200 amps rated bus bar with four pole MCCB of 125 Amp breaking capacity 16 KA , 415 Volts complete all as specified and as directed 22 S&F MCB TPN63 Amps, C curve type 10 KA Breaking capacity 240 Volts complete all as specifird and as directed. 23 S&F MCB SP 6 to 32 Amps, C Curve type 10 KA breaking capacity 240 Volts complete all as specifird and as directed. 24 S&F MCB SPN 40 Amps, C Curve type 10 KA breaking capacity 240 Volts complete all as specified and directed. 25 EXTERNAL ELECTRIFICATION 26 Supply, Installation, testing and Commissioning of transformer step down outdoor type 11 KV, 433 volts three phase 50 Hz, 100KVA (Level-III) capacity core type double copper wound coil immeresed, naturally cooled oil natural air natural (ONAN) , with external cooling tubes / fins , delta connection on primary side (HV side) and star connected to secondary side (LV side) in accordance with vector group Dyn11 with neurtal brought out on secondary side (LV side) and having seven tap positions on HV side for voltage variation from +5% to -10% in steps of 2.5% for HV side to be changed by the mains of hand operated off load tap changing gear. Max losses at 75 °CTemp rise at 50% of load shall not exceeds 392 watts and at 100% load shall not exceed 1365 watts. 27 The max temperature rise should not increase 40°C in oil (measured by thermameter) and 45°C in HV/LV windings (measured by resistance method) after continous full load run on an ambient temperature of 40°C. The transformer shall be IS 1180 (Part-1 2014) and ammended upto date including initial filling of transformer oil confirming to IS- 335 and shall comprise of following : (a) Three nos porcelain bushing suitable for 11 KV on HV side complete with brass/copper rod , nuts/washers and cable box .(b) one cable box on LT side (Secondary side) consisting of four nos porcelain bushings with copper rods complete withnuts/washerswith cable glands suitable for taking out of LT 1100 Volts grade XLPE armoured cables including jointing materials complete. (c) Oil conservator with filler type drain valve and oil temerature gauge. (d) Dehydrating breather with first fill of dehydrating agent ( Silica Gel) . 28 (e) Expansion ventthermometer pocket on tank cover , oil level gauge , oil drain filter, filter valve, lifting lugs/jacks , oil filling hole with cap/plug with connection plate complete , air release valve plug and 04 nos plain solid caste stell deattachable rollers. (f) 01 No dial type thermometer vapour pressure type having range 0°C to 120°C . (g) Two earthing terminals on tank cover to facillitate fixing of 32/6 mm GI earth strips for body earthing.(h) Rating plate and terminal marking plate(j) Extra bushing for neutral in the LT cable box for providing independent set of earthing for Neutral.Note : Quoated rate shall be inclusive of providing T&P required for testing and commissioing of transformer 11/0.433KV ,100 KVA ratingto the propsed location by providing hydra and tractor trolley complete. 29 Supply , fabrication, Testing and Commissioning (including CPRI type test certified ), Outdoor type, floor mounted , cubicle type LT panel board suitable for 415 volts, 3 phase 4 wire 50 Hz AC supply system having busbar chamber with insulated for the Panel shall be dust and vermin proof IP-66 class protection and made of 3 mm, CRCA MS sheet,double door,front and Back opening with proper locking arrangement ,lifting lugs,rubber gasket on front and back to make it dust and vermin proof , and 50x50x6MM thick MS angle iron, frame work , copper busbar 300 Amps for 3 phase 4 wire system, powder coated finish over two coat of redoxide primer, including internal wiring with PVC insulated strandedFRLS, copper conductor cable , IS-694 marked , 1100 volts grade of appropriate size (but not less than 4.0 Sqmm ), PCC foundation for mounting of Panel and comprising of following: 30 INCOMING:-(i) MCCB 4-Pole200 Amp 415 volts AC, 25KA rupturing capacity adjustable thermal type -01 No (incoming)(ii) Analog type Voltmeter 0-500volts square 96mm flush pattern with rotary selector switch - 01 Set(iii) Analog type Amp meter square 96mm flush pattern having range 0-200 Amp with 3 way rotary selector switch and CTs of Suitable range - 01 No(iv) Indicating lamp, LED type (Red ,Yellow, Blue) - 01 No(v)Copper bus bar 300 Amp with insulator - 04 Nos(vi) Connection and internal wiring complete - 01 Job 31 OUTGOINGS:-(i) MCCB TPN 63 Amp 415 volts AC, 16KA rupturing capacity-03No (ii) MCB SPN 20 Amp 415 volts AC, 10KA rupturing capacity-01 No (iii) All incoming & out going feeders shall be connected by cable gland plates/glands (iv) The various feeders shall be indicated by 50 mm size letters in synthetic enamel white paint. 32 M&L for LT Pole box for security/Street light weather proof made out of PVC fire retardant non fusing sock and dust proof one piece molded SMC base and SMC cover with hinged door all mounting type comprising of aluminium 25Ampbus bar with MCB SP 10 amp of size 300x200x100mm, fixed on pole with MS clamps 20x3mm with necessary nuts, washers and incl applying two coats of synthetic enamel paint over red oxcide primer on steel surface/clamps and embrossing/painting of danger sign ofsize not less than 10cmsX7.5 cms with letter and conventional skill and bones in signal red colour on front face of kisko box complete all as directed. 33 Supply and fixing lightening arrester expulsion type complete with all fittings transmission class discharge capacity up to10 kilo ampere HT 11KV, 65KAstation class and shall comply with the requirements of routine test as a specified in the relevant IEC: 99-4 and IS- 3070 (Part-III) complete all as specified and directed by engineer in charge 34 EXTERNAL WATER SUPPLY 35 M&L construction of brick masonary valve pit/ chamber of size internal dimension of 900X900X1200 mm size (Type B:) in PCC block masonry built in CM(1,6) with MS cover 3 mm thick and angle iron frame 40 x 40 x 5 mm with locking arrangement including excavation and earth work in any type of soil, PCC (1:4:8) type D-2 for foundation, PCC bed/coping in cement concrete (1:2:4) type B1,plastering 15 mm thick in CM (1:4), painting with one coat of red oxide primer and 2 coats of bituminous black paint on all steel surface all as specified and directed by Engr-In-Charge. 36 AIR CONDITIONING AND REFRIGERATION 37 Supply and install wall mounted inverter type split unit indoor/outdoor complete of capacity 2 TR with cordless remote control unit with inbuilt air ionizer and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 complete all as specified and directed by engineer-in-charge. 38 DG SETS 39 Supplying, installing, commissioning and testing silent Diesel engine driven Ea Generating Set 415 volts 3 phase 4 wire 100 KVA/80KW capacity mounted Aesthetic weather proof as per CPCB (Central Pollution Control Board) - IV norms, as per latest IS norms & noise level shall not exceed 75 db at a distance of 2 metre conforming to Engine BS-5514, ISO 3046 and Alternator BS 5000, IS 4722, IS 13364 (Part 1&11) Genset ISO 8528 complete with relay panel and switch gear for automatic starting on main failure control panel having meter relay and comprising of the following:(A) Diesel Engine: Diesel Engine developing not less than 125 BHP at NTP, 1500 RPM turbocharged cooled engine inclusive of the following standard accessories 40 (a) Radiator cooling system(b) Spider coupling guard(c) Flywheel to suit flexible coupling/closed coupled(d) Fly wheel housing complete with starter gear ring and coupling (e) Fuel houses (f) Air cleaner(g) Fuel and lub oil filter(h) By pass filter(i) Coolant inhabitor(k) Fuel pump PTR type/in line monoblock fuel injection pump(1) Water pump(m) Lub oil pump(n) Electric starter 12 volts DC(0) Industrial silencer(p) Control push pull(q) Lub oil cooler 41 (B)Alternator: Alternator suitable for continuous operation generating 100 KVA/80 KW at 1500 rpm 415 volts at NTP 0.8 power factor 3 phase 50 Hz, self excited & regulated with ball/roller bearings conforming to IS-4722. (C)Fuel tank suitable capacity to run 24 hrs made out of 14 SWG MS sheet powder coated with inlet and outlet connection and fuel level indicator. (D) Base frame fabricated from MS channel of suitable size and machined to ensure perfect alignment.(E) One Nos battery of 12 volts each 100 AH lead acid type(F)Supply, installation, testing and commissioning of AMF (Automatic Main Failure) panel suitable for generating set for capacity 100 KVA grouted in the floor with PCC/RCC foundation factory made indoor cubical type front operatable fabricated from MS sheet (1.6 mm) of suitable size comprising power contractors ML-30 or equivalent capacity of 42 other bus chamber copper bus bar of current rating 400 Amps with high insulation & instantaneous tripping device suitable for complete panel over current 0.5 Amps, electronic letch circuit with tripping indication of each shape of fault and provisions of reset facilities complete protection of AMF panel, painted with powder coating of following features:- (a) 3 Phase MVR relay unit for main power contractor built with single phase protection both on LV/HV side, 3 phase low voltage cut off at 200 volts reverse phase protection, 3 phase high voltage cut off 460 volts unbalance voltage tripping, separate indication lights for each tripping and 3 phase mains on front panel having 2 NO/NC 6 Amps interlocking auxilary contacts - 01 No. (b) Description all as per Srl item No (F) (a) herein before but of 3 phase AVR relay unit for generator supply contactor with same specifications as above- 01 No. 43 (c)Self sequential starting relay unit 24 volt DC with dual interlocking timer for self on, self off (3sec-15 sec) adj independently with another timer for set fails to start alarm with self power contactor 24 volts DC 25 Amps-01 No. (d) Electronic timer 220 volts 50 Hz ON relay (10 sec-40 sec) Adj to restore commercial supply from main power contactor with 1 No/NC auxiliary contact 6 Amps, 18 volts, 500 ohms-01 No.(e) Description all as per Serial item No (H) (d) above but OFF relay for fuel cut off operation for solenoid valve with fuel power contactor 24 volt DC, 25 Amps-01 No. (f) Battery charging unit 24 volt 10 Amps consisting of step down transformer with primary tap selector, bridge rectifier alongwith shunt capacitor having digital battery voltmeter (0-30) volts of 3.5 digit LED/LCD/FND display panel mounting type also featuring trickle/boost & off facility - 01 set. 44 (g) Digital 4 digit frequency meter (30-70) Hz having LED/LCD/FND display panel mounting mains operated - 01 No.(h)MCCB, 4 pole, 200 A, 35 KA with adjustable over load & adjustable short circuit.Note :-The quoted rates includes the DG Set foundatiion as per manufacturers instruction and as specified by Engineer-in-Charge. 45 LIFT 46 Design ,Supply installation, erection and commissioning and testing of passenger Lift of capacity 8 person (544 kg) with microprocessor controller variable voltage variable frequency (VVVF) best having selective collection control center opening steel power operated car and landing door system speed 1.5 m per second serving ground floor to upper floor G+2(upto 2 floor)infrared screen sensor to since the complete lift opening overload warning indicator intercom system with signal automatic push operation with /without attendant having suitable car/cage size to house the door and stainless steel handle on all sides of cage floor announciator with music arrival Chrome full length car operating panel emergency lift car cage made out of min 18 SWG stainless steel (moon Rock finish) as well as cage roof covered with stainless steel sheet of suitable size cage floor made iron stainless steel chequered plate 5 mm thick travel guide rails for operation on 415volts 3 phase 50 Hz AC including the following:- 47 (a) Cage with a four number LED 9 watt and cabin fan one number 300 mm sweep with grill (b)Machine guide rail in T section with longue & groove arrangementfor smooth operation of car and counter weight.© Landing - 03 Nos (G+2) (d) Rated speed -1.5 m per second (e) Rated load 8 passenger -544 kgs(f)Nos of opening & Stops - 3/3 (Three stops and three openings)(g) Electric motor AC 415 volts, 3 phase 50 c/ss of suitable capacity electric cableing (FRLS) including all necessary PVC conduits of suitable size control panel and MCB(h) Type of operations- Single automation post button(j) Type ofcontrol -microprocessor variable voltage and variable frequency (VVVF) 48 (k) Type of signal system- Hall button with digital hall position indicator digital car postition indicator in car. All fixtures in stainless steel face plate (2mm Thick) (i)Provision of travelling cables with copper conductor junction boxes wiring having copper conductor cables with provision of suitable size of GI/PVC through and others accessories complete (m)Automatic rescue device battery operated to bring the car cage to the nearest floor and auto opening for evacuation of passenger in the event of power failure and also to operate alarm and emergency light having power backup for a period of minimum 1 hr (60 minutes) with battery charge of adequate capacity for battery charging within 2 hours after it use.(n) Earthing connection of the machine drive motor and control panel shall be done to the earth during earthing and Earth strip shall be measured and paid for seperately. 49 (o)RCC/ PCC foundation and all specified and directed complete with suitable size MS ISMB bolts grouting plates etc.(p)Provision of hoist way and governors rope with governor(q)Provision of buffer springs as per manufacturers design(r)Car cabin will have VVVF drive with power doors(s)Provision of dust proof inspection box on Car top(t)Provision of inverter of adequate capacity to operate the car cabin fan car light emergency light and alarm bell, intercom with battery backup for minimum 1 hour in event of electric breakdown and with battery charging system complete all specified and directed by engineer-in-charge.(u)Provision of any other components not considered above and required at the time of execution for smooth functioning of lift as a whole.(v)Provision of suitable cap CVT for the new microprocessor controller to safe guard the electronic circuit and enable smooth functioning of lift in case of voltage fluctuation in the system 50 (w)Provision of safety guarding eqpt such as two knobs with switches controller guarding pit pulley guarding ,pit ladder fascia plate 2 cover free space between car cabin and host way and rain switches etc.(x)Provision of Fireman switch complete at ground floor fitted inbox having stainless steel face plate 2 mm thick and covered with glass cover.Safety Measures:(i) Overload relays(ii)Contactor and fuses(iii)Electrical terminals high quality(iv)Limit switch with accessories on each door /cage(v)Gravity counter vate limit switches for top most position.(vi)Break motor of suitable size with men release management.(vii)Phase sequence character and single phase preventer 51 Note :(i)Press and speak system to be connected with existing machine room independently.(ii)Existing intercom in the cabin machine room shall be connected with existing communication network as desired(iii)DOs and Dont steel plate have to be installed inside the car cabin. 52 Supply ,Installingand Testing &Commissioning Servo controlled voltage stablizer 3 phase 50 Hz, 30 KVA rating static IGBT-Type voltage regulation Air cooled ,Indoor Type with Input Correction voltage352 to 477V out of voltage 415V +/- 1% rate/speed of correction 3000V/Sec complete with 20m seconds i.e within one wave form.The static stabilizer to give a reak time correction and other fittings/accessores complete as per standard manufacturing . 53 Supply installed test and commissioning of LT panel indoor type cubical, type factory fabricated out of MS of 2 mm thick dust vermin proof, weather proof, IP- 54 grade of protection fabricated on 50x50x5 mm thick MS angle iron frame both side opening and locking arrangement including providing bus bar chamber of capacity 100 ampere rating for 415 V 50Hz system including interconnection with solid conductor/strips/wires/cable with hot shrinkcolour coded sleeves with RYB colour and suitable adopter boxes with spreader links for connecting cables with switch terminals (Where necessary) complete with following:- (Lift Panel Type III ) (ground)INCOMING & OUTGOING(a) MCCB 63 Amps 4 Pole 16KA(b) Voltmeter 0-500 volt(c) Amperemeter 0-200 Amp(d) LED Indicator Set 54 AREA DRAINAGE 55 S&F SRFC drain covers with perforated holes factory made of size 500mm x 1000mm and minimum 75 mm thickness, set in cement mortar 1:4 complete all as specified and as directed.
Contract Date: Mar 03, 2025 Contract Value : 5.16 Crore
Statutory Bodies & Commissions/Committees No of Bidders 3
Contract Date: Ref. Documents Contract Value : 1
Boards / Undertakings / PSU No of Bidders 2
Uttar Pradesh View Result →
26.
Power #3903580 AOC
Bids Are Invited For Custom Bid For Services - 200131813 Biennial Contract For Mechanical Maintenance Of Chp System Equipment Ntpc Kanti, 10.10. ( Fhcpl00bd800 ) Coupling ( <> ) Replacement Coupling Replacement. For Measurement Purpose Any One Of The Following Will Be Treated As One Unit. Replacement Of Fluid Coupling ‘Or’ Conveyor Drive Brake Drum ‘Or’ Gear Box Cooling Fan Or Flexible Coupling A ) Shifting Of New / Repaired Fluid Coupling / Brake Drum / Cooling Fan / Flexible Coupling At Site. B ) Decoupling Of Fluid Coupling / Dismantling Of Thruster Brakes ( If Required ) And Shifting Of Motor To The Required Place. C ) Removal Of Fluid Coupling / Brake Drum / Cooling Fan / Flexible Coupling From Motor / Gear Box. D ) Mounting Of New / Repaired Fluid Coupling / Brake Drum / Cooling Fan / Flexible Coupling, Placement Of Motor And Oil Filling In Coupling If Required. E ) Coupling Of The Drive And System Normalization After The Alignment. F ) Trial Run And Defect Rectification, If Any Fluid Coupling Dis Mounted After Dismantling Then Assembling Of Coupling After Defective Part Replacement Is In The Scope Of The Contractor Without Any Extra Claim. G ) Shifting Of Old Fluid Coupling / Brake Drum / Cooling Fan At Chp Workshop Or As Per Direction Of Engr-In-Charge. H ) If Brake Drum, Cooling Fan And Flexible Coupling Replaced At A Time, No Extra Payment Will Be Made. It Will Also Be Applicable For Removal & Remounting Of Couplings. I ) Cutting / Welding Required For The Job Comes Under Contractor’S Scope. 10.20 ) . ( Fhiid00bd800 ) Impact Idlers ( <> ) - Repl. Idlers Repl. / Screw Take Up Tightening And Loosening / Idler Frame Repl. / Scrapper Repl. / Deck Plate Repl. Replacement Of Rollers / Idlers: [ For Payment Purpose Replacement Of Total No. Of Rollers / Idlers In One Frame Carrying / Return Will Be Treated As One Unit. ] A ) Replacement Of Any Rollers / Idlers In Chp Comes Under This. B ) Shifting Of New / Repaired Rollers / Idlers At Site And Fixing At Required Place. C ) Shifting Of Old / Damaged Rollers / Idlers To Chp Workshop / Chp Scrap Yard. D ) If More Than One Rollers / Idlers Are Replaced In Same Frame Simultaneously, It Will Be Treated As One Unit. ‘Or’ For Measurement Purpose Any One Of The Following Will Be Treated As One Unit. Screw Take Up Loosening And Tightening: A ) It Includes All Screw Take Ups In Chp Conveyors. B ) Loosening Of Screw Take Up As Per Requirement And Retightening It As Per Direction. Or Replacement Of Idler Frame: A ) Replacement Of Any Idler Frame In Chp Comes Under This. B ) Shifting Of New / Repaired Idler Frame At Site And Fixing At Required Place. C ) Shifting Of Old / Damaged Idler Frame To Chp Workshop / Chp Scrap Yard. D ) If Idlers Are Also Replaced During Frame Replacement, No Extra Payment Will Be Made. E ) Cutting / Welding Required For The Job Comes Under Contractor’S Scope. ‘Or‘ Scrapper Replacement: A ) Removal Of Worn-Out Rubber, Making New Rubber From Old Conveyor Belt / Rubber Sheet, As Per Requirement. B ) Fixing Of Rubber In Scraper And Reinstallation On The Conveyor. C ) Cutting / Welding Required For The Job Comes Under Contractor’S Scope. ‘Or‘ Replacement Of Deck Plate ( 01. No ) : A ) Removal Of Existing Plate After Removing The Idlers & Frames As Required. B ) Shifting Of New Deck Plate ( Including Wooden One ) At Site & Fixing It. C ) Normalization Of The System. D ) Cutting / Welding Required For The Job Comes Under Contractor’S Scope. 10.30 ) . ( Fhg / B58bd800 ) Gear Boxes ( Hold Back ) Repl ( 6 Hrs ) Gear Box Hold Back Replacement / Fluid Coupling Oil Replacement / Decoupling And Coupling Of Gear Coupling / Thruster Replacement / Thruster Overhauling Gear Box Hold Back Replacement: A ) Replacement Of Hold Back Of Any Conveyor Gear Box In Chp Comes Under This. B ) Shifting Of New / Repaired Hold Back From Chp Store / Central Store / Central Workshop To Site. C ) Removal Of Old Hold Back From Gear Box And Fixing Of New Hold Back. D ) Trial Run And Defect Rectification, If Any. E ) Shifting Of Old Hold Back To Chp Workshop. For Payment Purpose One G-Box Hold Back Repl. Will Be Treated As One Unit. ‘Or’ Fluid Coupling Oil Replacement: A ) Oil Replacement Of Any Fluid Coupling In Chp Comes Under This. B ) Removal Of Coupling Guard, Opening Of Fusible Plug / Filling Plug And Draining Of Oil In A Can & Shifting It To Chp Scrap Yard. C ) Shifting Of Oil At Site & Filling In The Fluid Coupling Up To Specified Angle. D ) Fitting The Fusible Plug / Filling Plug, Fixing Of Coupling Guard. For Payment Purpose Two Fluid Coupling Oil Replacements Will Be Treated As One Unit. ‘Or‘ Decoupling And Coupling Of Gear Coupling ( After Greasing ) : A ) This Covers All Gear Couplings Being Used In Chp. For Payment Purpose Decoupling And Coupling Of Gear Coupling Of One Gear Coupling Will Be Treated As One Unit. ‘Or Thruster Replacement: A ) Replacement Of Any Thruster ( Except Stacker Rail Clamp ) In Chp Comes Under This. B ) Shifting Of New / Repaired Thruster At Site. C ) Removal Old Thruster And Fixing Of New One, Stroke Adjustment As Per Requirement. D ) Shifting Of Old Thruster To Chp Workshop. E ) Trial Run And Defect Rectification If Any For Payment Purpose One Thruster Repl. Will Be Treated As One Unit. ‘Or’ Thruster Overhauling: A ) This Covers For Any Thruster Being Used In Chp B ) Dismantling Of Thruster As Per Direction Of Area Engr. C ) Replacement Of Damaged Part As Per Direction & Reassembling. D ) Oil Filling And Testing For Smooth Operation. For Payment Purpose One Thruster Overhauling Will Be Treated As One Unit. 10.40 ) . ( Fhp / C12bd800 ) Pulley / Coupling ( Nde-Brg ) Repl Servicing Of Fluid Coupling / Replacement Of Conveyor Non Drive End Bearing / Plumber Block For Measurement Purpose Any One Of Them Will Be Treated As Separate Unit. Servicing Of Fluid Coupling: A ) This Covers Any Fluid Coupling Being Used In Chp. B ) Dismantling Of Fluid Coupling As Per Direction. C ) Replacement Of Defective Parts Of Fluid Coupling As Per Direction And Re - Assembling. D ) Testing Of Oil Leakage By Filling Oil. Defect Rectification, If Any. ‘Or’ Replacement Of Conveyor Non Drive End Bearing / Plumber Block: A ) It Includes Any Bearing / Plumber Block Of Any Pulley Including Gtu / Bend / Snub / Drive Pulley Of Any Conveyor In Chp. B ) Belt Clamping, Take Up Lifting & Lowering Will Be In The Scope Of This Contract. C ) Shifting Of New Bearing / Plumber Block At Site. D ) Opening And Removal Of Plumber Block / Bearing Form The Pulley. E ) Mounting Of New Bearing On The Pulley And Fixing Of Plumber Block And Greasing Bearings. F ) If Required Bearing Of Non-Drive Pulley Will Also Be Replaced. G ) System Normalization. Trial Run And Defect Rectification, If Any. H ) If Plumber Block Is Replaced At The Time Of Bearing Replacement, No Extra Payment Will Be Made. 10.50 ) . ( Fhcht51bd800 ) Chutes ( Skirt Rubber ) Repl Skirt Rubber Replacement / Shifting Of Oil / Lubricant Drums Skirt Rubber Replacement: A ) Replacement Of Rubber Of Any Skirt Comes Under This, If Skirt Is Damaged. B ) Opening Of Skirt Rubber Clamp And Removing Of Worn-Out Rubber. C ) Making The New Skirt Rubber, From Old Conveyor Belt / Skirt Rubber Sheet, As Per Requirement. D ) Fixing Of New Rubber In Frame & Mounting It On The Skirt And Trial Run For Leakage Arresting. E ) For Measurement Purpose, For Measurement Purpose One Metre Or Part Will Be Taken As One Unit. ‘Or’ Shifting Of Oil / Lubricant Drums From Central Stores Or Any Other Place Inside Plant To Chp Store And Vice Versa: A ) It Includes Shifting Of Filled Oil / Grease Drums From Central Stores Or Any Other Place Inside Plant To Chp Store And Vice Versa. B ) Shifting Of One Drum Will Be Taken As One Unit. C ) Transportation Arrangement Is To Be Arranged By The Contractor. 10.60 ) . Fhp / C52bd800: Conv Pulleys ( <> ) ( Non-Drive ) Repl Conv Pulleys ( Non-Drive ) Repl / Replacement Of Take Up Pulley / Replacement Of Conveyor Pulley Bearing / Plumber Block ( Drive End ) / Gear Coupling Replacement ( One Pair ) A ) Replacement Of All Non-Drive Pulley Including Snub Pulley, Bend Pulley, Tail Pulley And Tail Snub Pulley Comes Under This. B ) Shifting Of New / Repaired Pulley From Chp Store / Central Store / Central Workshop To Site. C ) Belt Clamping, Take Up Lifting And Lowering Will Be In The Scope Of This Contract. D ) Removal Old Pulley, Bearings And Plumber Block From The Old Pulley. E ) Mounting Of Bearings And Plumber Blocks, On The New Pulley. F ) Placement Of New Pulley On Position And Alignment With The System. G ) System Normalization Trial Run And Defect Rectification, If Any. H ) Shifting Of Old Pulley To Chp Workshop / Central Workshop. ‘Or’ Replacement Of Take Up Pulley: A ) Replacement Of Take Up Pulley Of Any Conveyor Comes Under This. B ) Shifting Of New Repaired Pulley At Site. C ) Belt Clamping, Take Up Lifting And Lowering Will Be In The Scope Of This Contract. D ) Cutting The Conveyor Belt At The Required Place If Required And Removal Of Old Pulley From Foundation. E ) Removal Of Bearings / Plumber Blocks Of Pulley. F ) Mounting Of Bearings And Plumber Blocks On The New Pulley. G ) Lifting Of New Pulley And Mounting It On The Foundation. H ) Pulling Of Conveyor Belt And Belt Joint Will Not Be In The Scope Of This Contract. I ) System Normalization, Trial Run & Defect Rectification, If Any. J ) Shifting Of Old / Damaged Pulley To Chp / Central Workshop. ‘Or’ Replacement Of Conveyor Pulley Bearing / Plumber Block ( Drive End ) : A ) Decoupling Of Gear Box And Shifting It To The Required Place. B ) Removal Of Low Speed Side Coupling Half. C ) Belt Clamping, Take Up Lifting And Lowering Will Be In The Scope Of This Contract. D ) Drive Pulley Lifting And Removal Of Plumber Block / Bearings. E ) Shifting Of New Bearing / Plumber Block And Mounting It On The Pulley. Greasing Of Bearing. F ) System Normalization, Placement Of Gear Box And Alignment. G ) Trial Run And Defect Rectification, If Any. H ) If Plumber Block Is Replaced At The Time Of Bearing Replacement, No Extra Payment Will Be Made. ‘Or’ Gear Coupling Replacement ( One Pair ) : A ) Replacement Of Any Gear Coupling Of Any Conveyor Belt Comes Under This. B ) Shifting Of New / Repaired Gear Coupling At Site. C ) Removal Of Coupling Guards, Decoupling Of Gear Box From Both High Speed Side And Slow Speed Side. Shifting Of Motor And Gear Box At Required Place And Removal Of Gear Coupling After Dismantling Of Thruster Brake, If Required. D ) Mounting Of New Gear Coupling, Placement Of Gear Box At Foundation. E ) Normalization Of System After Alignment, For Alignment. F ) Trial Run And Defect Rectification, If Any. G ) Shifting Of Old Gear Coupling To Chp Workshop. H ) Cutting / Welding Required For The Job Comes Under Contractor’S Scope. 10.70 ) . ( Fhcnp00bd800 ) Conv Pulleys ( <> ) -Repl Replacement Of Drive Pulley: A ) Replacement Of Drive Pulley Of Any Conveyor In Chp ( Except Coal / Sampler ) Comes Under This. B ) Shifting Of New / Repaired Pulley From Central Store / Chp Store / Central Workshop To Site. C ) Belt Clamping, Take Up Lifting And Lowering Will Be In The Scope Of This Contract. D ) Decoupling The Gear Coupling And Removal Of Drive Pulley After Opening And Removal Of Discharge Hood. E ) Removal Of Gear Coupling, Bearing & Plumber Blocks. F ) Mounting Of Gear Coupling, Bearings And Plumber Blocks On The New Pulley. G ) Placement Of New Pulley On Position & Alignment Of The Pulley With Gear Box To The Satisfaction Of Engr.- In - Charge. H ) System Normalization Trial Run & Defect Rectification, If Any. I ) Shifting Of Old Pulley To Chp Workshop / Central Workshop 10.80 ) . ( Fhpcc53bd800 ) Crushers ( Hammers ) Repl Replacement Of Full Set Hammers Replacement Of Full Hammers: A ) Weighing Of New Hammers, Weight Balancing And Shifting Them To The Site After Internal Inspection Of Crusher. B ) Removal Of Hammers From The Crusher And Replacement Of New Hammers As Per Direction Of Area Engineer Or His Representative. C ) Shifting Of Old Hammers To Chp Scrap Yard. D ) Any Cutting / Welding Required Will Be In Scope Of Contractor. 10.90. ( Fhscc11bd001 ) Cr Hammer Attend Breakdown Repl. Of Hammers In Two Opposite Rows For Measurement Purpose Any One Of The Following Will Be Treated As Separate Unit. Repl. Of Hammers In Two Opposite Rows: A ) Weighing Of New Hammers, Weight Balancing And Shifting Them To The Site After Internal Inspection Of Crusher. B ) Removal Of Broken / Worn Out Hammers From The Crusher And Replacement Of New Hammers As Per Direction Of Area Engineer Or His Representative. C ) Shifting Of Old Hammers To Chp Scrap Yard. D ) Any Cutting / Welding Required Will Be In Scope Of Contractor. 10.100 ( Fhgzf17bd800 ) Grizzly Feeders ( Shaft Assly. ) Repl Replacement Of G.F. Shaft / Replacement Of Crusher Kick Off Plate Replacement Of G.F. Shaft ( One No. Of Shaft ) : A ) Removal Of Guards, Universal Coupling / Cardoon Shaft & Counter Weight. B ) Removal Of Bearings And Bearing Housings At D.E. & Nde C ) Shifting Of New G.F. Shaft To Site. D ) Removal Of Old Shaft And Fixing Of New Shaft. E ) Mounting Of Bearing Housings On The New Shaft / Replacement Of Bearing Housing If Required. F ) Remounting Of Counter Weight, Universal Coupling And Their Guards. G ) Greasing, Trial Run And Defect Rectification, If Any. H ) Shifting Of Old / Damaged G.F. Shaft To Chp Workshop / Chp Scrap Yard. ‘Or’ Replacement Of Crusher Kick Off Plate: A ) Shifting Of Kick Off Plate At Site From Central Store / Site Store. B ) Removal Of Crusher Top Cover / Side Liners If Required. C ) Opening Of Kick Off Plate Bolts And Removal Of Frame Fill Piece. D ) Fixing Of New Frame Fill Piece, Tightening Of Bolts Up To Required Torque / Welding If Required. E ) Normalization Of System. Trial Run And Defect Rectification. F ) Shifting Of Old Frame Fill Piece To Chp Scrap Yard Or As Per Direction. 10.110. ( Fhvbf00bd000 ) Vibro Feeders ( <> ) Attend Defect Vibro Feeders Attend Defect / Tightening Of Breaker Plate Bolt For Measurement Purpose Any One Of The Following Will Be Treated As Separate Unit. ( 1 ) . Remove The Worn Out / Broken Tray From The Position. ( 2 ) . Replace The Same With The New Tray / Repaired Tray With New / Same Tie Rod / Tie Rope Assembly And Do Proper Alignment. ( 3 ) Any Other Minor Work Like Patch Work In Chute And Adjustment In Hopper / Chute To Maintain The Freeness Of Tray With Chute Etc As Per Direction Of Eic. 4 ) Take Trial After Adjusting The Tray. 5 ) Declination Angle Adjustment Of The As Per The Direction Of Eic. 6 ) Unbalanced Weight Adjustment Work As Per The Direction Of Eic. 7 ) Replacement Of Vibro Feeder Pedestal Spring ‘Or’ Tightening Of Breaker Plate Bolt After Welding Of Head: A ) Welding Of Head Of One Breaker Plate Bolt As Per Requirement. B ) Tightness Checking Of Bolt And Locking Of Nuts. C ) Any Cutting / Welding Required Will Be In The Scope Of The Contractor. D ) For Measurement Purpose Tightening Of Bolt Of One Breaker Plate Will Be Treated As One Unit. E ) For Welding Of Heads Of Breaker Plate Bolts, E7018-1 Electrodes Will Be Supplied By Kbunl Free Of Cost. 10.120. ( Fhscc17bd800 ) Crushers ( Rotor Assly ) Repl Crushers ( Rotor Assly ) Repl For Measurement Purpose Any One Of The Following Will Be Treated As Separate Unit. Replacement Of Crusher Rotor: A ) Shifting Of New Rotor From Central Store / Any Other Store To Crusher Floor B ) Decoupling Of Slow Speed Coupling And Removal Of Pin Bush. C ) Removal Of Crusher Cover, Front Side Housing, Tramp Iron Tray, Plumber Block Bolts, Side Liners, Hood, Chute Etc. D ) Removal Of All Hammers And Suspension Bars. E ) Lifting Up The Rotor And Placement At A Safe Place. F ) Removal Of Coupling Half And Bearings From Rotor. G ) Lower The New Rotor Into Position After Mounting Of Bearings, Plumber Blocks And Coupling Half. Box Up In Reverse Order. H ) Check And Correct Misalignment Of Slow Speed Side. I ) Balancing Of Hammers & Mounting ( Replace Full Set Of Hammers If Required ) , System Normalization, Trial Run And Defect Rectification, If Any. J ) Shifting Of Old Rotor To Chp Scrap Yard. K ) Replacement Of Defective Side Liners, Repairing Of ‘V’ Shaped Deflector Plate And Other Plates If Required, Also To Be Done Without Any Extra Financial Implication. L ) Any Cutting / Welding Required For This Job Will Be In The Scope Of Contractor. M ) For Welding Of Heads Of Liner Bolts, Breaker Plate Bolts, Screen Plate Bolts E7018-1 Electrodes Will Be Supplied By Kbunl Free Of Cost. ‘Or’ Replacement Of G.F. Deck Side Walls ( 01 Set =02Nos ) : A ) Shifting Of 02 No. Deck Side Walls From Kbunl Stores To Site. B ) Dismantling Of Bearing Housings, Bypass Chute, Side Skirt, Shaft Tubes, Spring Units, Removal Of Damaged Deck Side Walls After Proper Supporting Of Skirts & Decks. C ) Fixing Of New Deck Side Walls & Re-Installation Of All Dismantled Parts. D ) Removal Of All Supports. System Normalization, Trial Run & Defect Rectification, If Any. E ) Shifting Of Damaged Deck Side Walls To Chp Scrap Yard. F ) If Only 01No ( One ) G F Deck Side Wall Is Replaced, 50% Payment Will Be Made. B ) Cutting / Welding Required For The Job Comes Under Contractor’S Scope. 10.130. ( Fhpcc52bd800 ) Crushers ( Screen Plate ) Repl Crushers ( Screen Plate ) Repl / Breaker Plate / Kick Off Plate / Replacement Of Crusher D.E. Bearing / Plumber Block For Measurement Purpose Any One Of The Following Will Be Treated As Separate Unit. Replacement Of Crusher Screen Plate / Breaker Plate / Kick Off Plate : A ) Shifting Of Screen Plate / Breaker Plate / Kick Off Plate At Site From Central Store / Site Store. B ) Removal Of Crusher Top Cover. C ) Opening Of Screen Plate / Breaker Plate / Kick Off Plate Bolts And Removal Of The Same. D ) Fixing Of New Screen Plate / Breaker Plate / Kick Off Plate , Tightening Of Bolts Up To Required Torque / Welding If Required. This Includes Fixing Of Site Make Screen Plates Also. E ) Normalization Of System. Trial Run And Defect Rectification. F ) Shifting Of Old Screen Plate / Breaker Plate / Kick Off Plate To Scrap Yard Or As Per Direction. G ) If Both Upper & Lower Screen Plates Are Replaced Simultaneously, It Will Be Treated As One Unit. I ) All Allied Activity Related With Screen Plate Replacement, Including Cutting / Welding Or Preparation Of Jig Fixtures Comes Under Contractor’S Scope. ‘Or’ Replacement Of Crusher D.E. Bearing / Plumber Block : A ) Shifting Of New Bearing / Plumber Block At Site. B ) Decoupling Of Gear Box From Slow Speed Side And High Speed Side. C ) Removal Of Flexible Coupling Half. E ) Opening Of Shaft Seal Covers On Both Sides. F ) Loosening Of Both Side Plumber Block Bolts And Its Top Cover. G ) Removal Of Top Cover Of Crusher. H ) Removal Of Side Liners Above The End Discs On Both Sides. I ) Lifting Of Rotor And Removal Of Plumber Block And Bearing ( De ) . J ) Mounting Of New Bearing Correctly And Adjusting The Clearance To The Specified Value. K ) Placement Of Plumber Block And Lowering Of Rotor. L ) Boxing Up In Reverse Order. M ) Mounting Of Coupling, Placement Of G / B. Alignment Of Rotor With Gear Box. N ) System Normalization And Trial Run And Defect Rectification, If Any. O ) Shifting Of Old Bearing / Plumber Block To Chp Scrap Yard. P ) Cutting / Welding Required For The Job Comes Under Contractor’S Scope. Q ) If Bearing And Plumber Block Are Replaced Simultaneously No Extra Payment Shall Be Made, If Will Be Treated As One Unit. 10.140. ( Fhttr00bd000 ) Travelling Tripper ( <> ) -Attend Defect Travelling Tripper Rail Structure Supporting Beam Bolts Tightening / Miscellaneous Jobs Related To Travelling Tripper For Measurement Purpose Any One Of The Following Will Be Treated As Separate Unit. Travelling Tripper Rail Structure Supporting Beam Bolts Tightening: A ) It Includes Tightening All Bolts Of Travelling Tripper Rail Supporting Beam, Structural Member, Coupling Bolts Of Tripper. Or Miscellaneous Jobs Related To Travelling Tripper Such As Scrapper Adjustment, Skirt Fixing, Eh Brakes Inspection And Adjustment Etc. 10.150. ( Fhttr22gn808 ) Travelling Tripper ( Tripper Wheel ) Realignment Re-Railment Of Trippers : A ) Dismantling Of Tripper Bracings / Str., As Required. B ) Lifting Of Tripper By Mechanical Means And Placing It On The Tripper Rails. C ) Re-Assembling Of All Supporting Str. As Per Direction And System Normalization. D ) Trial Run And Defect Rectification, If Any. E ) Any Cutting / Welding Required For This Job Will Be In The Contractor’S Scope. 10.160. ( Fhttr00oh001 ) Travelling Tripper ( <> ) -Oh Overhauling Of Tripper Hand Brake / Manual Brake / Ilms Pulley Bearing Flange Replacement / Flap Gate Flange Bearing Replacement / Crusher Hammer Pin Replacement For Measurement Purpose Any One Of Them Will Be Treated As Separate Unit. Overhauling Of Tripper Hand Brake / Manual Brake: A ) Removal Of Damaged Hand Brake From Position. B ) Rectification / Strengthening Of Fixing Base Plate / Replacement Of Shoe Etc. C ) Refixing Of Hand Brakes By Welding / Bolting. Check For Alignment / Fouling With Rails. E ) System Trial Run. Defects Rectification, If Any, After Trial Run. ‘Or’ Ilms Pulley Bearing Flange Replacement ( Nde ) A ) Shifting Of New Bearing At Site. B ) Preparation Of Jig / Fixtures For Supporting The Ilms. C ) Removal Of Bearing / Bearing Flange. D ) System Normalisation. Trial Run And Defect Rectification, If Any. E ) If Bearing Flange Is Replaced While Bearing Replacement, It Will Be Treated As One Unit. F ) Cutting / Welding Required For The Job Comes Under Contractor’S Scope. ‘Or’ Flap Gate Flange Bearing Replacement: A ) Removal Of Operating Lever / Counter Weight Lever. B ) Shifting Of New Bearing At Site. C ) Removal Of Old Bearing And Mounting Of New Bearing And Greasing. Refitting Of Lever. D ) Shifting Of Old Bearing At Chp Scrap Yard. E ) Any Cutting / Welding Work Will Be In The Scope Of The Contractor. ‘Or’ Crusher Hammer Pin Replacement : A ) Opening Of Access Door. Opening Of Shaft Seal / Removal Of Pin Retainer Bolts. B ) Shifting Of New Hammer Pin At Site, After Weighing. C ) Removal Of Damaged Hammer Pin And Replacement With New One. Replacement Of The Same On Opposite Side Also. D ) Crusher Box Up, Trial Run And Defect Rectification, If Any. 10.170. ( Fhttr00bd801 ) Travelling Tripper ( <> ) Repair Tripper Rail Joint Welding. Removal Of Old Welding & Welding As Per Requirement. Welding Electrode E7018-1 Will Be Supplied By Kbunl Free Of Cost. For Measurement Purpose One Centimeter Will Be Treated One No. For Payment Purpose 01 Cm Will Be Treated As 01 No 10.180. ( Fhilm56bd800 ) Ilms / Obms ( Pulley Brg ) Repl Ilms Pulley Bearing / Bearing Flange Replacement ( De ) / Flap Gate Actuator Replacement / Replacement Of Flap Gate Trunnion Bracket For Measurement Purpose Any One Of Them Will Be Treated As Separate Unit. Ilms Pulley Bearing / Bearing Flange Replacement ( De ) : A ) Shifting Of New Bearing At Site. B ) Preparation Of Jig / Fixture For Supporting The Ilms. C ) Removal Of Drive Motor And Gear Box. Removal Of Bearing / Bearing Flange. D ) Fixing Of New Flanged Bearing And Mounting It On The Pulley Shaft. E ) Assembling Of The Drive, Alignment And System Normalization. F ) Trial Run And Defect Rectification, If Any. G ) If Bearing Flange Is Replaced While Bearing Replacement, It Will Be Treated As One Unit. H ) Cutting / Welding Required For The Job Comes Under Contractor’S Scope. ‘Or’ Flap Gate Actuator Replacement: A ) Shifting Of New / Repaired Actuator At Site. B ) Removal Of Old Actuator And Fixing Of New Actuator. C ) Shifting Of Old Actuator To Chp Workshop. D ) Operation Checking Of Flap Gate And Defect Rectification, If Any. E ) Overhauling Of The Replaced Actuator. Or Replacement Of Flap Gate Trunnion Bracket : A ) Shifting Of New / Repaired Trunnion Bracket At Site. B ) Removal Of Old Trunnion Bracket And Fixing Of New Trunnion Bracket. C ) Operation Checking Of Flap Gate And Defect Rectification If Any D ) Shifting Of Old Trunnion Bracket To Chp Workshop. 10.190. ( Fhg / B54bd800 ) Gear Box ( Gear Replacement ) Full Set Of Gear Box Internals Replacement: A ) It Includes Replacement Of Full Set Of Internals Of Any Gear Box Of Any Drive In C.H.P. B ) Shifting Of New / Repaired Gear Box Internal From Chp Store / Central Store / Central Workshop. C ) Decoupling Of Gear Box From H.S. & Low Speed Side & Shifting Of Motor And Removal Of Fluid Coupling, If Required. D ) Dismantling Of Gear Box Top Cover, End Covers Etc And Removal Of Its Internals And Removal Of Slow Speed Side Coupling Half. E ) Mounting Of Coupling Half / Bearing On Shaft And Assembling Of Shafts In The Gear Box And Checking For Proper Matching. F ) Box Up Of Gear Box, Placement On Foundation & Placement Of Motor, Replacement Of Defective Oil Seals, If Required And Oil Filling Up To The Mark. G ) System Normalization After Alignment. H ) If Removal & Mounting Of Fluid Coupling / Flexible Coupling Half Is Required, Payment Will Be Done As Per Sl. No. 01 I ) Trial Run And Defect Rectification, If Any. J ) Shifting Of Old Gear Box Internals To Chp Workshop / Central Work / Scrap Yard. K ) Any Cutting / Welding Work Will Be In The Scope Of The Contractor. 10.200. ( Fhg / B51bd800 ) Gear Boxes ( I / P Shaft ) Repl Replacement Of Gear Box Input Shaft / Shaft Bearings / Oil Seals / Complete Gear Box / Replacement Of Output Shaft For Measurement Purpose Any One Of Them Will Be Treated As Separate Unit. Replacement Of Gear Box Input Shaft / Shaft Bearings / Oil Seals / Complete Gear Box: A ) Replacement Of Input Shaft / Shaft Bearing / Oil Seals Of Any Gear Box In Chp Comes Under This. B ) Shifting Of Shaft / Shaft Bearings / Oil Seals From Central Store / Chp Store / Central Store To Site. C ) Decoupling Of Input Shaft From Motor And Shifting Of Motor To The Required Place. D ) Removal Of Fluid Coupling Or Brake Drum / Oil Seals After Dismantling Of Thruster Brake, If Required. E ) Opening Of Gear Box Top Cover Etc And Removal Of The Input Shaft, Oil Seals, Removal Of Bearings Etc From The Shaft. F ) Mounting Of Bearings And Hub On The Input Shaft, Replacement Of Oil Seals If Required. G ) Fixing Of Input Shaft And Also To Be Checked For Proper Matching With Intermediate Shaft. H ) Box Up Of Gear Box In Reverse Order. I ) Mounting Of Fluid Coupling, & Motor Placement. J ) Alignment K ) System Normalization, Trial Run And Defect Rectification, If Any. L ) Cutting / Welding Required For The Job Comes Under Contractor’S Scope. M ) Shifting Of Old Damaged Shaft To Chp Scrap Yard / Central Workshop. N ) If Shaft, Oil Seals And Bearings Are Replaced Simultaneously, It Will Be Counted As One Unit Only. Or Replacement Of Output Shaft / Shaft Bearing / Oil Seals: A ) Replacement Of Output Shaft / Shaft Bearings / Oil Seals Of Any Drive In C.H.P. Comes Under This. B ) Shifting Of New / Repaired Shaft / Shaft Bearings / Oil Seals At Site And Removal Of Coupling Half C ) Decoupling Of Gear Box On Slow Speed Side, Removal Of Gear Box Top Cover & End Cover. D ) Removal Of Output Shaft / Bearings / Oil Seals Etc. E ) Internal Inspection & Mounting Of Bearings And Coupling Half On The Output Shaft. F ) Placement Of The Output Shaft. G.Box Box-Up, And System Normalization. Replacement Of Defective Oil Seals, If Required. G ) Trial Run And Defect Rectification, If Any. H ) Cutting / Welding Required For The Job Comes Under Contractor’S Scope. I ) Shifting Of Old Damaged Shaft / Bearings To Central Workshop. / Chp Scrap Yard J ) If Shaft , Oil Seals And Bearings Are Replaced Simultaneously , It Will Be Counted As One Unit Only. 10.210. ( Fhg / B12bd800 ) Gear Boxes ( 10-50Ltrs ) Repl Replacement Of Gear Box Oil : ( Oil Qty. < 50 Ltrs. ) Any Of The Following Work Is Covered Under This Item. For Measurement Purpose Any One Of Them Will Be Treated As Separate Unit. Replacement Of Gear Box Oil : ( Oil Qty. < 50 Ltrs. ) A ) Replacement Of Oil Of Any Gear Box Comes Under This Having Oil Capacity More Than 10 Ltrs.. B ) Shifting Of Oil / Oil Drums From Chp Store To The Site. C ) Draining Of Oil In A Can And Shifting It To Chp Scrap Yard. D ) Filling Of Oil In The Gear Box After Flushing. Normalisation Of The System. Or De-Coupling, Coupling And Alignment Of Ilms Motor. 10.220. ( Fhg / B13bd800 ) Gear Boxes ( 50-100 Ltrs ) Repl Replacement Of Gear Box Oil : ( Oil Qty.> 50 Ltrs. ) / Replacement Of Cable Reeling Drum Gear Box For Measurement Purpose Any One Of Them Will Be Treated As Separate Unit. Replacement Of Gear Box Oil : ( Oil Qty.> 50 Ltrs. ) A ) Replacement Of Oil Of Any Gear Box Comes Under This . B ) Shifting Of Oil / Oil Drums From Chp Store To The Site. C ) Draining Of Oil In A Can And Shifting It To Chp Scrap Yard. D ) Filling Of Oil In The Gear Box After Flushing. E ) Normalisation Of The System. ‘Or’ Replacement Of Cable Reeling Drum Gear Box : A ) Replacement Of Crd Gear Box Of Travelling Tripper Comes Under This .Shifting Of New / Repaired Gear Box At Site. B ) Removal Of Motor After Decoupling Of Coupling. Removal Of Crd Drum If Required. C ) Removal Of Gear Box And Removal Of Coupling Half. D ) Mounting Of Coupling Half In New Gear Box. E ) Placement Of New Gear Box In Position Re-Assembling Of Motor. F ) Trial Run And Defect Rectification. 10.230. ( Fhg / B00gn152 ) Gear Boxes ( <> ) Decpl / Cpl / Algn Alignment Of Lt Drive ( For Motor 15 Kw To 200Kw ) / Overhauling Of Gear Box ( Below 30 Kw ) / Ilms Gear Box Replacement For Measurement Purpose Any One Of Them Will Be Treated As Separate Unit. Alignment Of Lt Drive ( For Motor 15 Kw To 200Kw ) : A ) If Coupling Pin Bush Replacement Is Required, No Extra Payment Will Be Done. B ) It Includes All Related Activity For The Alignment. C ) For Payment Purpose, If Both Slow Speed ( With Dial Gauge ) And High Speed Alignment Is Done, It Will Be Treated As Separate Unit. D ) Cutting / Welding Required For The Job Comes Under Contractor’S Scope. ‘Or’ Overhauling Of Gear Box ( Below 30 Kw ) : A ) Opening Of Gear Box. Replacement Of Defective / Worn-Out / Damaged Parts. B ) Re-Assembling Of Gear Box And Oil Filling. ‘Or’ Ilms Gear Box Replacement: A ) Shifting Of New / Repaired Gear Box At Site. B ) Decoupling And Removal Of Motor. Decoupling And Removal Of Gear Box. C ) Mounting Of New Gear Box, Re-Assembling Of Motor And Alignment. D ) Coupling Of Motor, Trial Run And Defect Rectification, If Any. E ) Shifting Of Old Gear Box At Chp / Central Workshop. 10.240. ( Fhttr14bd800 ) Travelling Tripper ( Lt Gearbox ) Repl Replacement Of Travelling Tripper Travel Drive Gear Box / Alignment Of Ht Drive ( For Motor Above 200 Kw ) For Measurement Purpose Any One Of Them Will Be Treated As Separate Unit. Replacement Of Travelling Tripper Travel Drive Gear Box : A ) Shifting Of New / Repaired Gear Box At Site. B ) Dismantling Of Old Gear Box / Motor And Fixing Of New Gear Box & Motor. C ) Dismantling Of Thruster Brake & Refixing. D ) Alignment Of The Drive And Oil Top Up In New Gear Box After Flushing. E ) Normalization Of The System And Trial Run To Be Taken. Defect Rectification, If Any. F ) Shifting Of All Materials To Chp Store / Chp Scrap Yard. G ) Cutting / Welding Required For The Job Comes Under Contractor’S Scope. ‘Or’ Alignment Of Ht Drive ( For Motor Above 200 Kw ) : A ) If Coupling Pin Bush Replacement Is Required, No Extra Payment Will Be Done. B ) It Includes All Related Activity For The Alignment ( Slow Speed Or High Speed ) . C ) For Payment Purpose, If Both Slow Speed ( With Dial Gauge ) And High Speed Alignment Is Done, It Will Be Treated As Separate Unit. D ) Cutting / Welding Required For The Job Comes Under Contractor’S Scope. 10.250. ( Fhg / B00bd000 ) Gear Boxes ( <> ) Attend Defect Gear Box Gauge Glass Replacement / Replacement Of Sump Pump Spider Of Love Joy Coupling For Measurement Purpose Any One Of The Following Will Be Treated As Separate Unit. A ) Gear Box Gauge Glass Replacement: B ) Shifting Of New / Repaired Gauge Glass At Site. C ) Removal Of Old Gauge Glass After Isolation And Mounting Of New One. D ) Oil Leakage Job Of Gear Box ‘ Or ‘ Replacement Of Sump Pump Spider Of Love Joy Coupling : A ) No Payment Will Be Made For Spider Of Love-Joy Coupling Replacement If It Is Done While Pump Overhauling. 10.260. ( Fhmat14gn863 ) Matl ( Misc ) Shifting Transportation Of Materials: A ) It Includes Transportation Of Any Kind Of Material From Central Store Or Any Other Place Inside Plant To Chp Store Or Vice Versa, As Per Direction. B ) For Measurement Purpose Materials Upto 50Kg Or Part There Off Will Be Taken As One Unit. 10.270. Chp Em Bkdn Mtc St-1 ( Fhmat11gn162 ) Matl ( Scrap ) Disposal Transportation Of Misc. Scrap: A ) It Covers Transportation Of Misc. Scrap From Chp Area To Other Place Inside The Plant As Per Direction. B ) For Measurement Purpose Transportation Of One-Ton Scrap Will Be Taken As One Unit. All Arrangement For Loading, Unloading And Transportation Including Supply Of Tractor Is In Contractor’S Scope. 10.280. ( Fhmsw00gn250 ) Fabrication Erection ( <> ) Lighter Section Miscellaneous Steel Fabrication Work In C.H.P. ( Lighter Section ) :- A ) Fabrication Of Ladder , Platform And Other Miscellaneous Work In Chp And Mgr Area ( From Wagon Tippler To Bunker Floor And Mgr Gates ) At Different Elevations And Different Location Comes Under This . B ) Transportation Of Steel From Kbunl Stores To Work Site . C ) Fabrication Work Is To Be Done As Per Given Drawing Or As Per Direction Of Area Engineer And Placement Of The Same At The Required Place Or As Per Direction. D ) New Fabricated Work Is To Be Painted With One Coat Of Primer Paint Of Kbunl Approved Brand. Paint To Be Provided By The Contractor. E ) Payment Will Be Done On Per Ton Basis. F ) It Will Be Applicable For Steel Sheets Upto 3.15Mm. G ) Removal Of Old Plate / Structure From Location And Shifting To Chp Scrap Yard Will Be In The Scope Of The Contractor. 10.290. ( Fhcht00bd801 ) Chutes ( <> ) -Repair Coal Leakage Arresting By Patch Work : A ) Arresting Of Coal Dust Leakage From Any Chute / Duct In Chp Comes Under This. B ) Leakage Arresting Includes Fabrication Of Required Patch From Ms Plate ( Up To 20Mm Thick ) And Welding Of The Same At Required Place Or As Per Direction Of Area Engineer. C ) Trial Run For Leakage Arresting If Any. D ) For Measurement Purpose Payment Will Be Made On Per Unit Basis And 300 Mm*300 Mm Will Be Treated As One Number. 10.300. ( Fhcht00gn250 ) ( Fabrication +Erection ) Miscellaneous Steel Fabrication Work In C.H.P. ( Heavy Section ) .:- A ) Fabrication Of Ladder, Platform And Other Miscellaneous Work In Chp And Mgr Area ( From Track Hopper To Bunker Floor And Mgr Gates ) At Different Elevations And Different Location Comes Under This . B ) Transportation Of Steel From Kbunl Stores To Work Site . C ) Fabrication Work Is To Be Done As Per Given Drawing Or As Per Direction Of Area Engineer And Placement Of The Same At The Required Place Or As Per Direction. D ) New Fabricated Work Is To Be Painted With One Coat Of Primer Paint Of Kbunl Approved Brand. Paint To Be Provided By The Contractor. E ) Payment Will Be Done On Per Ton Basis. F ) Removal Of Old Plate / Structure From Location And Shifting To Chp Scrap Yard Will Be In The Scope Of Contractor. 10.310. ( Fhdep00gn602 ) Deptt <> Man.Dep-Sw Manpower Supply- Sw Manpower Supply For Other Miscellaneous Work ( As Per Direction Of Engr-In-Charge ) . Necessary T&Ps Required For Supply Job Will Be Provided By Contractor ( As Per T&Ps List ) . - Sw ( Fitter / Rigger / Welder ) 10.320. ( Fhdep00gn600 ) Deptt <> Man.Dep-Usw Manpower Supply-Usw Manpower Supply For Other Miscellaneous Work ( As Per Direction Of Engr-In-Charge ) . Necessary T&Ps Required For Supply Job Will Be Provided By Contractor ( As Per T&Ps List ) - Usw ( Helper ) 10.330. ( Fhscc13gn250 ) Crushers ( Bkr Plate ) Fabrication Crushers ( Bkr Plate ) Fabrication / Deck Plate Fabrication Of Vs Assembly Making Breaker Plate For Crusher ( One Full Set Consisting Of Four Piece Small / 02Pc Big Size ) A ) Marking Of Breaker Plate As Per Drawing And Instruction Of Area Engineer. B ) Cutting Of Breaker Plate. C ) Transportation Of Breaker Plates From Chp Steel Yard To Central Workshop For Drilling. D ) Transportation Of Breaker Plates From Central Workshop To Chp Crusher House / Store Area After Drilling. Drilling Of Holes Will Not Be In The Scope Of The Agency. Payment Will Be Made As ( 04 Nos = 01 Unit ) Or A ) Fabrication Of Deck Plates Of Vibrating Screen 10.340. Conv Pulleys ( <> ) Brg Inspection: Fhcnp00bd799 Conv. Pulley ( <> ) Brg Inspection Bearing Inspection For Conveyor Pulley / Crusher / Bearings Of Wheels Of Mobile Equipment’S Stacker , Travelling Tripper Bearing Inspection A ) Inspection Of Bearings ( Both End ) Of Any Conveyor Pulley In Chp. B ) Supply Of All T&Ps And Manpower Will Be In The Scope Of The Agency. C ) All Related Jobs For Bearing Inspection Will Be In The Scope Of The Agency. D ) Greasing Of Bearings After Inspection To Be Done By The Agency. 10.350. ( Fhbcn02pm002 ) Belt Conveyor 02 W Checks Belt Conveyor 02 W Checks 1. Any Conveyor In Chp Is Covered Under This Item. 2. Check All Idlers For Free Rotation. 3. Replace Defective Idlers / Idlers Frame / Guide Rollers, 4. Adjust / Replace The Skirt Rubber, Scrapper Rubber & Dust Curtains. 5. Check The Belts For Any Sway, Train As Required. 6. Check The Thruster Oil Level, Top Up If Required .Adjust The Thruster Brake. 7. Check The Gear Box & Fluid Coupling Oil Level / Leakage, Top Up If Required. Clean The Gear Box Breather. 8. Check The Belt Joints For Any Ply Separation, Check The Belt For Any Damage, Cut Mark Etc.& Report. 9. Check Pulley Bearing For Overheating, Noise Etc. Check The Temp. Of Gear Box. Check Oil Pressure If Gauge Is Provided. 10. Check That Take Up Travel Is Free; There Is No Deformation In Its Guide. 11. Tighten All Foundation Bolts Of Motor, Gear Box, Pulley, Plumber Block Etc. 12. Any Cutting / Welding / Tacking Of Idler With Frame Is In The Scope Of Contractor. 10.360. ( Fhbcn02pm004 ) Belt Conveyor 04 W Checks Belt Conveyor 04 W Checks 1. Any Conveyor In Chp Is Covered Under This Item. 2. Repeat Items 2, 3, 4, 5, 6, 7, 8, 11&12 Of Job Sl.No. – 35 3. Check Tightness Of Fan Bolts & Foundation Bolts Of Drive & Pulley. 4. Check For Any Leakage From The Seals Of Gear Box Fluid Coupling And Report. 5. Check The Play In Pin & Bush Coupling And Report If Bushes Are Damaged. 6. Inspect Pulley Lagging For Wear / Damage & Report. 7. Check The Pulley For Any Crack; Tighten The Locking Assembly Bolts By Torque Wrench Unto Adequate Torque. 8. Check That There Is No Deformation In Take Up Guide. 10.370. ( Fhbcn02pm012 ) : Belt Conveyor 12 W Checks Belt Conveyor 12 W Checks 1. Any Conveyor In Chp Is Covered Under This Item. 2. Repeat All Items Of Sl. No. –36. 3. Check Oil Level Of Fluid Coupling, Top Up If Required. 4. Grease Pulley Bearings & Gear Coupling & Take Up Guides. 5. Check Proper Functioning Of Thruster Brakes Adjust, If Required. 10.380. ( Fhilm00pm002 ) : Ilms 02 W Checks Ilms 02 W Checks 1. Any In - Line Magnetic Separator In Chp Is Covered Under This Item. 2. Inspect Belt For Any Damage. Check Belt Sway / Belt Tension, Adjust, If Required. 3. Check Gear Box Oil Level, Top Up, If Required. Check Tightness All Foundation Bolts. 4. Adjust / Replace The Skirt Rubber. 10.390. ( Fhilm00pm004 ) Ilms 04 W Checks Ilms 04 W Checks 1. Any In - Line Magnetic Separator In Chp Is Covered Under This Item. 2. Repeat All Items Of Job Sl.No. – 38 3. Grease All Bearings Of Plumber Blocks. Grease The Screw Take-Up. 10.400. ( Fhgzf00pm002 ) : Grizzly Feeder 02 W Checks Grizzly Feeder 02 W Checks 1. Any Grizzly Feeder In Crusher House Is Covered Under This Item. 2. Check Tightness Of The Foundation Bolts Of Motor, Grizzly Feeder Bearing Housing, Seal Cover And Any Other. 3. Ch. Tightness Tray Fixing Bolts, Chute Fixing Bolts, Counter Weight, Fixing Bolts. 4. Check Coal Leakage From Gf, Adjust / Replace Rubber Dust Seals. 5. Clean The Deck And Check The Welding . 6. Check Welding Of Liners. 7. Check The Condition Of Spring & Reports. 8. Clean The Bypass Chute. Inspect The Deck Sidewalls For Any Crack & Report. 9. Any Cutting / Welding Required Is In The Scope Of Contractor. 10.410. ( Fhgzf00pm004 ) : Grizzly Feeder 04 W Checks Grizzly Feeder 04 W Checks 1. Any Grizzly Feeder In Crusher House Is Covered Under This Item. 2. Repeat All Items Of Job Sl.No. – 40 3. Grease All Bearings. Check Condition Of Universal Joints & Propeller Shaft. 10.420. ( Fhpcc00pm002 ) : Crushers ( <> ) 02W Chks Crushers 02W Chks 1. Any Crusher In Crusher House Is Covered Under This Item. 2. Check The Condition Of Hammers And Report. 3. Ch. Gear Box Oil Levels, Top Up, If Required. Clean The Air Breather / Replace The Gauge Glass If Required. Remove Foreign Materials From Tramp Iron Box. 4. Check For Any Coal Leakage From Manholes, Inspection Holes Etc. & Arrest The Leakage. 5. Check Tightness Of All Cage Fixing Bolts, Housing Bolts Etc. 6. Check Breaker Plate, Shaft Disc Key , Screen Plate, Frame Fill Piece, V Shaped Deflector Plate, Screen Plate Arm, Liners, Screw Jack ( Cage Adjuster ) , Screen Clamp Bar For Wear And Report. Check The Tightness Of Bolts And Weld The Bolts, If Required. 7. Check Tightness Of All Bolts & Nuts Of Gear Box Fan, Plumber Blocks & Foundation Bolts. 8. Clean The Pressure Equaliser Line. 9. Any Cutting / Welding Required Is In The Scope Of Contractor. 10.430. ( Fhpcc00pm004 ) : Crushers ( <> ) 04W Chks Crushers 04W Chks 1. Any Crusher In Crusher House Is Covered Under This Item. 2. Repeat All Items Of Job Sl.No. – 42 3. Grease Nde & De Bearing Of Crusher, Cage Adjusting Device. 4. Check Fluid Coupling Oil Level, Top Up, If Required. ( To Be Done After Three Months ) 5. Inspect Breaker Plate Holding Plate And Report. 10.440 ) . ( Fhttr00pm002 ) : Traveling Tripper 02 W Checks Traveling Tripper 02 W Checks 1. Any Traveling Tripper In Chp Is Covered Under This Item. 2. Check All Idlers Of The Tripper For Free Rotation / Abnormal Noise. 3. Replace The Defective Idlers / Idler Frames. Place Fallen Idlers. 4. Check Oil Level / Oil Leakage Of Travel Drive Gear Box, Crd Gear Box And Thruster, Top Up, If Required. Check / Adjust Tightness Of Thrustor Brake Shoe. 5. Check And Adjust Tripper Hand Brake / Rail Cleaner. 6. Check Tightness Of All Foundation Bolts Of Motor, Gear Pulley Etc 7. Check Flap Gate Actuator Is Operating Freely & Closing Properly. 10.450 ) . ( Fhttr00pm004 ) : Traveling Tripper 04 W Checks Traveling Tripper 04 W Checks 1. Any Traveling Tripper In Chp Is Covered Under This Item. 2. Repeat Items 3, 4, 5 , 6 & 7 Of Job Sl.No. – 44 3. Check Gear Box Air Breather For Clogging, Clean, If Required. 4. Check Pin Bush For Coupling And Report For Replacement, If Required. 5. Check Tripper Rail Welding Joints. Check Tightness Of Rail Supporting Structure Bolts At Joint, If Welding Is Broken. 10.460 ) . ( Fhs / R00pm002 ) : Stacker 02 W Checks Stacker 02 W Checks A ) Boom Conveyor: 1. Check All Idlers For Free Rotation, Replace Defective Idlers / Idler Frame. 2. Check / Adjust / Replace Skirt Rubber, Scrapper Rubber, Dust Curtains. 3. Check The Belt For Any Sway, Train, If Required. 4. Check The Oil Level, Top Up If Required. Clean The Air Breather. 5. Check Free Movement Of Thrusters, Clean Dust Etc. From Moving Zone. B ) Intermediate Conveyor : 1. Check All Idlers For Free Rotation, Replace Defective Idlers. 2. Check / Adjust / Replace Skirt Rubber, Scrapper Rubber, Dust Curtains. 3. Check The Belt For Any Sway, Train, If Required. 4. Check The Oil Level, Top Up If Required. Clean The Air Breather. 5. Check Free Movement Of Thrusters, Clean Dust Etc. From Moving Zone. C ) Pcrd / Ccrd 1. Check Proper Functioning Of Pcrd / Ccrd, Rectify If Required. 2. Check Tightness Of Chain, Sprocket, And Foundation Bolts Etc. 3. Check Oil Level Of Angle Gear Box, Top Up, If Required. 10.470 ) . ( Fhs / R00pm004 ) Stacker - 04 W Checks Stacker - 04 W Checks A ) Boom Conveyor : 1. Check And Adjust / Replace The Rubber Strip Of Scrappers / Skirt Rubber. 2. Check The Oil Level Of Gear Box, Top Up, If Required. Clean The Air Breather, If Required. 3. Check For Any Leakage From The Seals Of Gear Box, Fluid Coupling. 4. Check The Play In Pin Bush Coupling, Report For Replacement, If Required. 5. Inspect Pulley Lagging For Wear / Damage. 6. Tighten All Foundation Bolts Of Motor, Gear Box, Pulley. 7. Check The Screw Take-Up Travel Is Free And There Is No Deformation In Its Guides. Check The Belt Tension, Tighten, If Required. 8. Check Functioning Of Thrusters / Thrustor Brakes, Rectify As Required. B ) Intermediate Conveyor : 1. Check And Adjust / Replace The Rubber Strip Of Scrapper / Skirt Rubber. 2. Check Oil Level Of Gear Box, Top Up, If Required. Clean The Air Breather. 3. Check For Any Leakage From The Gear Box, Fluid Coupling. 4. Check The Play In Pin Push Coupling, Report For Replacement, If Required. 5. Check Pulley Lagging For Wear / Damage. 6. Tighten All Foundation Bolts Of Motor, Gear Box, Pulley. 7. Check That Screw Take Up Guide Travel Is Free And There Is No Deformation In Its Guide. Check Belt Tension, Tighten, If Required. 8. Check Functioning Of Thrustors / Thrustor Brakes, Rectify As Required. C ) Pcrd / Ccrd 1. Check The Freeness Of Cable Rollers. 2. Check & Adjust Cable And Cable Guide. 3. Check The Angle Gear Box Oil Level, Top Up, If Required. 4. Check Tightness Of Foundation Bolts, Chain, Sprocket Etc. 5. Grease All Plumber Block Bearings. 6. Check Tightness Of Chain, Sprocket And Foundation Bolts Etc. 10.480 ) . ( Fhfpg00pm004 ) Flap Gate 04 W Checks Flap Gate 04 W Checks 1. Any Flap Gate In Chp Is Covered Under This Item. 2. Check Oil Level In The Actuator Gear Box, Top Up, If Required. 3. Grease Both Side Bearing Of Flap Gate And Actuator. 4. Check Actuator Is Operating Freely & Closing Properly Both Sides. 5. Check Tightness Of Foundation Bolts. 6. Check For Any Wear Of The Flap Gate Surface & Report. 7.Check For Any Possible Coal Passing Through Flap Gate. 8. Any Cutting / Welding Required Is In The Scope Of Contractor. 10.490 ) . ( Fhrpg00pm004 ) Rake & Pinion Gate 04 W Checks Rake & Pinion Gate 04 W Checks 1. Any Rake & Pinion Gate In Crusher House Is Covered Under This Item. 2. Oil Top Up In The Rpg’S Both Gear Boxes, If Required. 3. Check Freeness Of Chain-Sprocket Wheel. 4. Greasing Of All The Bearings. 5. Check Tightness Of All The Foundation Bolts. 6. Check Rack & Pinion Gate Assembly For Freeness. 10.500 ) . ( Fhpit03pm004 ) Sump Pumps 04 W Checks Sump Pumps 04 W Checks 1. For Measurement Purpose One Pump Of T / H Sump Pumps / Lwtp Vertical Pump Will Be Taken As One Unit. 2. Greasing Of Pumps Bearings. 3. Check The Rubber Spider Of The Coupling, Replace, If Required. 4. Check The Play In Pump-Motor Coupling, Adjust, If Required. 5. Check Tightness Of Foundation Bolts. 6. Check Leakage From Pipe Joints & Valve Gland. 7. Check Freeness Of Nr Valve And Gate Valve. 10.510 ) . ( Fhdes00pm004 ) :- De / Ds System 04 W Chks. De / Ds System 04 W Chks / Water Line Checking / General Checking And Defect Rectification Of Ventilation System / General Checking Of De - System Any Of The Following Work Is Covered Under This Item. For Measurement Purpose Any One Of The Following Will Be Treated As Separate Unit. General Checking And Defect Rectification Of Dust Suppression System In Tps, Stacker, Crusher House & Wagon Tippler Area . Pump: A ) Greasing All Bearings Of The Pump. B ) Replacement / Tighten The Gland Packing Of The Pump As Required. C ) Check Any Water Leakage And Report. Check Pin Bush Coupling Condition, Replace If Required. D ) Check Tightening Of All Foundation Bolt. Or Water Line Checking: A ) Clean The Pump Suction Strainer ( Pot Strainer ) & Y - Strainer. B ) Attend Water Leakage If Any , Including From Hose Pipe. C ) Check The Spray Nozzle Condition And Report. Or General Checking And Defect Rectification Of Ventilation System. A ) Greasing Of All Bearings. B ) Check V - Belt Condition, Replacement And Alignment If Requiared. C ) Check Tightness Of All Foundation Bolt. D ) Rotate The Fan Impeller By Hand And Report If Any Abnormality Is Observed. E ) Check The Stud Nut Tightness Of Impeller. Or General Checking Of De - System. A ) Greasing Of All Bearings. Check V-Belt Condition, Replacement And Alignment If Required. B ) Check Tightness Of All Foundation Bolt. C ) Rotate The Fan Impeller By Hand And Report If Any Abnormality Is Observed. D ) Check The Stud Nut Tightness Of Impeller. E ) Cleaning Of Rotary Lock Feeder Unit And Its Discharge Pipe. 10.520 ) . ( Fhmsl01bd800 ) — De / Ds / Service Water Line & Fire Line Defect Attend Replacement Of Pipe Line , Replacement Of Gate Valve / Nrv / Laying Of Pipe Line Replacement Of Pipe Line , Replacement Of Gate Valve / Nrv A ) Ds / De / Service Water Line In Chp / Fire Water B ) Shifting Of New Pipe Line At Site And Replacement Of Old Pipe Line. C ) Any Cutting Welding Required For The Job Comes Under This. D ) While Replacement Necessary Flange, Gasket, Fittings Are Also To Be Changed, If Required. E ) Shifting Of Old Pipe Line To Chp Scrap Yard. Trial Run And Defect Rectification. F ) For Measurement Purpose A Segment Of 01 Mtr Length Or Part There Of Will Be Treated As One Unit For Pipe Line Up To 65 Nb . G ) For Measurement Purpose A Segment Of 01 Mtr Length Or Part There Of Will Be Treated As 1.2 Unit For Pipe Line 80 Nb And Above . Or Laying Of Pipe Line A ) It Covers Laying Of Pipe Line ( With Fittings ) In Ds / De / Service Water Line In Chp / Fire Water. B ) Shifting Of New Pipe Line At Site. C ) While Laying Of Pipe Line Necessary Flange, Gasket, Fittings Are Also To Be Provided, If Required. Any Cutting Welding Required For The Job Comes Under This. E ) Trial Run And Defect Rectification. G ) Application Of 2 Coats Of Red Oxide Primer Paint On The Pipe, Red Oxide Primer Paint Is In The Partys Scope. H ) For Measurement Purpose A Segment Of 2Mtr Length Or Part There Of Will Be Treated As One Unit For Pipe Up To 65Nb. I ) For Measurement Purpose A Segment Of 2 Mtr Length Or Part There Of Will Be Treated As 1.15 Unit. For Pipe 80Nb And Above. 10.530 ) . ( Fhlpp01bd000 ) Ds Pump Gland Packing Rep. Or Adj. / Ds Pump Coupling Pin Bush Rep. / Ds / De Pump / Fan Bearing Greasing / Servicing Of Solenoid Valves In Ds Line ‘Or‘ Replacement Of V - Bells ( Full Set ) / Rep.Of Vent. Fan Air Filter / Dust Suppression System Nozzles Nipple Fixing / Cleaning Of Spray Nozzles In Dust Suppression System Any Of The Following Work Is Covered Under This Item. For Measurement Purpose Any One Of The Following Will Be Treated As Separate Unit. Ds Pump Gland Packing Replacement / Adjustment: A ) Replacement / Adjustment Of The Gland Packing Of The Pump For Arresting Water Leakage. ( One Side Or Both Side As Required ) . Trial Run And Adjustment Of The Glands. Or Ds Pump Coupling Pin Bush Replacement : Replacement Of Full Set Of Pin Bush Will Be Taken As One Unit. Or Cleaning Of Y - Strainer In Ds Line : Removal Of The Y - Strainers From The System, Cleaning It Upto The Satisfaction And Re - Fitting At Original Position. Or Servicing Of Valves In Ds Line: A ) Dismantling Of Solenoid V / V, Replacement / Repairing Of Defective Parts And Reassembling. Or Replacement Of V - Bells ( Full Set ) : A ) Removal Of Fan Belt Guard. Removal Of Damaged V - Belts. Shifting Of New V - Belts And Fixing On The V - Pulley. Alignment Of The Pulleys. Trial Run And Defect Rectification. Or Replacement Of Ventilation Fan Air Filter ( 01 No = 01 Unit ) : A ) Removal Of Air Filter From System. B ) Shifting Of New / Repaired Air Filter And Installation. C ) Drying Of The Filter And Fixing Back To Its Original Location. D ) Rectification Of Minor Repair Is For The Filters If Required, Or Greasing Of Fan / Pump Bearings ( Both Bearing ) Or Dust Suppression System Nozzles Nipple Fixing A ) Nipple To Be Fabricated From ½ Inch, Medium Duty Pipe, Length Of Nipple Will Be 3 To 4 Inches. B ) Removal Of Damaged Nipple & Fixing Of New . C ) Fixing Of Spray Nozzle On The Nipple. Or Cleaning Of Spray Nozzles In Dust Suppression System : A ) Removal Of Spray Nozzles From The Dust Suppression System. Dismantling Of Nozzles , Cleaning And Re - Fixing It At Original Position. B ) For Payment Purpose 05 Nos. Of Nozzles Or Part Thereof Will Be Treated As One Unit. 10.540 ) . ( Fhdes01bd800 ) Replacement Of Fire Sprinklers / Replacement Of Fire Hydrant Valve / Repairing Of Fire Hydrant Valve Any Of The Following Work Is Covered Under This Item. For Measurement Purpose Any One Of The Following Will Be Treated As Separate Unit. Replacement Of Fire Sprinklers : A ) Isolation Of The Sprinkler Line From Water Side If Required. Removal Of Damaged Sprinkler And Fixing Of New One. Charging Of The Line With Water And Leakage Arresting If Any. Or Replacement Of Fire Hydrant Valve: A ) Replacement Of Any Fire Hydrant Valve In Chp Is Covered Under This. B ) Shifting Of New / Repaired Fire Hydrant Valve To Site And Replacement Of The Defective Valve. C ) Shifting Of Damaged Fire Hydrant Valve To Chp Workshop. Or Repairing Of Fire Hydrant Valve: A ) Dismantling Of Fire Hydrant Valve, Replacement Of Defective Parts And Re-Assembling. B ) Spares Will Be Provided By Kbunl Free Of Cost. However, For Rubber Washer, It Is To Be Cut From Rubber Sheet, Supplied. 10.550 ) . ( Fhmsl01bd000 ) Water Leakage Arresting From Pipe Line / Flange ( Above Ground ) Leakage Arresting Includes Welding / Gasket Replacement / Pipe Fitting Replacement, If Any. 10.560 ) . ( Fhmsl01bd801 ) / Ms Piping ( Dia<=6 ) Repair Water Leakage Arresting From Pipe Line / Flange ( Under Ground ) A ) Leakage Arresting Includes Welding / Gasket Replacement / Pipe Fitting Replacement, If Any. B ) Dewatering Of The Pit, If Required. Dewatering Pump Will Be Provided By Kbunl Free Of Cost, If Available. C ) Proper Cleaning Of Pipe Surface For Welding At Leakage Area & Leakage Arresting Through Patch Work Or As Per Direction Of Area Engr. D ) If More Than One Leakage Is Found In One Digging, It Will Be Treated As One Unit. E ) Underground Pipes Are At 1.5M Depth ( Approx. ) . F ) Application Of Wrapping & Coating On Pipes / Patches Etc. All Materials In The Partys Scope. . 10.570 ) . ( Fhdep00gn624 ) ( Deptt <> Manpower Gang ( Adl ) ) Maintenance Jobs Per Shift ( Shift Maintenance ) : 1. Contractor Has To Deploy 02 ( 1 Welder + 1 Fitter ) , And 2 Helper And One Rigger For Chp Mechanical Maintenance In Shift As And When Asked By Eic. 2. They Will Be Deployed For Emergent Type Of Job Which Are Mentioned Below: 3.Oil Topping Up In Gear Box / Fluid Coupling 4. Removal & Fixing Of Coupling Guards 5. Opening & Closing Of Front & Back Doors Of Crushers. 6. Assistance In Changing Of Flap Gate During Path Selection. 7. V- Belt Replacement If Required 8. Adjustment / Replacement Of Skirt Rubber 9. Belt Scrapper Replacement / Adjustment 10. Patching Of Chute Puncture 11. Belt Training If Required 12. Removal / Replacement Of Idlers If Required 13. Any Job Assigned By Eic. 10.580 ) . Misc. Maint. Work ( Code: Fhmsw00bd000 ) Misc. Maint. Work Defect Liability Period: 01 Month. A ) .Cat-A ( Completion Period- 04 Hrs. ) 01. Belt Weight, Counter Weight Adjustment 02 Key Preparing / Key Way Repair 03 Hydraulic Jack Repair. 04 Canopy Cover Making & Fixing. 05 Back Plate Removal & Fixing. 06 Inspection Door Removal & Fixing. 07. Hold Back Removal & Fixing. 08. Wiper Replacement & Fixing. 09. Pcrd / Ccrd Guide Roller Repair Replacement ( Per Roller ) . 10. Chute Chocking Removal. 11. Limit Switch / Striker Fixing / Sr Striker Fixing . 12. Oil Topping / Oil Replacement ( 01 To 50 Liters ) 13. Removal Of Hold Back Engagement Bolt ( Per Conveyor ) 14. Cutting Set / Welding M / C. Shifting / Material Shifting 15. Breather Plug And Gauge Glass Cleaning / Fixing ( Per Gearbox ) . 16. Walk-Way Step Repair & Fixing 17. Hs Coupling Bolt And Bush Replacement ( Per Coupling ) . 18. Fcu Oil Adjustment ( Per Fcu ) . 19. Suspension Bar Locking Per Bar. 20. Coupling Bolt Locking Through Welding Per Bolt ( Ls ) . 21. Inspection Cover Fixing. ( Per Chute ) 22. Crusher Door Sealing Per Crusher. 23. Bearing Checking / Greasing ( Per Bearing ) . 24. R.P.G Opening And Closing. 25. Fixing / Removal Of Zss. 26. Coupling & Decoupling Of Equipment’S. 27. Pcrd / Ccrd Cable Positioning. 28. Rail Fish Plate Bolt Replacement. 29. Take Up Wire Rope Greasing / Lubricating Compound. 30. Flap Gate Actuator Arm Pin Removal & Fixing. 31. Hose / Pipe Clamp Fixing 32. Bolt Fixing In Chute Bolt- Hole. 33. Belt Training / Belt Swaying To Be Aligned. 34. O Ring Rubber Chord To Be Provided In Input / Output Shaft Of Gear Box. 35. Vs ‘V’ Belt Set Replacement & Alignment. 36. Fastening Of Belt By Belt Fastener ( 02 Fastener For 1No.Cat-A ) 37. Vs Upper Deck And Lower Deck Repairing 38. Misc. Belt Related Jobs 10.590 ) . Misc. Maint. Work ( Code: Fhmsw00bd001 ) Misc. Maint. Work Defect Liability Period: 01 Month. A ) .Cat-B ( Completion Period- 06 Hrs. ) 01. Gear Box / Conveyor Ls Coupling Bolt Removal & Fixing 02. Winch M / C Shifting & Welding At Location. 03. Sealing Belt Tensioning ( Per Conveyor ) / Bunker Sealing ( Per Unit ) 04. Hold Back Replacement. 05. L.S. Coupling Bolt Replacement ( Per Bolt ) 06. Crusher Cooler Servicing. 07. Chute Flange Joint Leakage Sealing / Arresting By Welding. 08. Inspection Cover Replacement. 09. Crusher Rotor Locknut Tightening. / Cr. Bearing Lock Nut Tightening. ( Per Crusher ) 10. V.S. Hinge Bush Block Replacement. 11. Tripper / Sr-Crack & Broken Wheel Repairing. 12 Fcu Multi Disc Replacement. 13. Foreign Material Removal. 14. R.P.G Gear Box Replacement. 15. Elect. Brake Shoe / Manual Brake Adjustment / Repairing. 16. Gear Box Inspection Cover Removal For Internal Inspection 17.Welding Of Rail / Conveyor Short Support / Stringer Post / Ladder Repair. 18. Grill Repairing. 19. Fg Shaft Bolt Replacement. 20. Repair Of Rail Crack By Welding. 21. Shaft Repairing ( Welding / Grinding ) . 22. Chute Block Switch Positioning And Repairing. 23. Pcrd / Ccrd Hanger Repairing Of Sr / Mt Etc. 24. Motor / Gear / Tail Pulley / Head Pulley Etc Canopy Or Guard / Cover Preparing & Fixing 25. Key Way Making. 26. Key Making For Coupling. 10.600. Code: Fhwgt00pm002 02 Weekly Checks Of Wagon Tippler ( Completion Period-08 Hours ) A. Checking / Repairing Of Ls & Hs Coupling Bolts. B. Checking / Repairing Of Gear Box Oil Level. C. Checking / Repairing Of Structures ( Ballast Container , Way Bridge, Rail Table, Etc. ) D. Checking / Repairing Of Pinions. E. Checking / Repairing Of Connecting Shafts. F. Checking / Repairing Of Power Lever. G. Checking / Repairing Of Spill Plates &Rollers. H. Checking / Repairing Of Civil Foundations. I. Checking / Repairing Of All Plummer Blocks. J. Checking / Repairing Of Bull Gears. K. Checking / Repairing Of Splice Joints Of Structures. L. Checking / Repairing Of Otls Switch Etc. M. Checking / Repairing / Installation Of Brake Shoes. N. Greasing Of Bearings By Grease Gun. O. Checking & Repairing Of Load Shell & Weigh Bridge. P. Spill Plate Roller & Bracket Checking / Repairing. 10.610 ) Code: Fhwgt00pm004 04 Weekly Checks Of Wagon Tippler ( Completion Period 10 Hours ) A. Checking / Repairing / Replacement Of Ls & Hs Coupling Bolts. B. Checking / Repairing Of Gear Box Oil Level. C. Checking / Repairing Of Structures ( Ballast Container , Way Bridge, Rail Table, Etc. ) D. Checking / Repairing Of Pinions. E. Checking / Repairing Of Connecting Shafts. F. Checking / Repairing Of Pall Lever. G. Checking / Repairing Of Spill Plates &Rollers. H. Checking / Repairing Of Civil Foundations. I. Checking / Repairing Of All Plummer Blocks. J. Checking / Repairing Of Bull Gears. K. Checking / Repairing Of Splice Joints Of Structures. L. Checking / Repairing Of Otls, Cam Switch Etc. M. Checking / Repairing Of Brake Shoes. N. Greasing Of Bearings By Grease Gun. O. Providing Of Servo Coat 140 On Pinion & Bull Gear. P. All Points Of 02 Weekly Checks. 10.620 ) Code: Fhwgt00pm012 12 Weekly Checks Of Wagon Tippler ( Completion Period -10 Hours ) A. Checking / Repairing / Replacement Of Ls & Hs Coupling Bolts. B. Checking Of Gear Box Oil Condition / Replacement If Required. C. Checking / Repairing / Replacement ( Partly ) If Required. ( Ballast Container , Way Bridge, Rail Table, Etc. ) D. Checking Of Bearing Clearances Of Pinions & Replacement If Required. E. Checking / Repairing / Alignment Of Connecting Shafts. F. Checking / Repairing / Adjustment Of Pawl Lever. G. Checking / Repairing / Replacement Of Spill Plates & Rollers. H. Checking / Repairing Of Civil Foundations. I. Checking / Repairing Of All Plumber Blocks. J. Checking / Repairing / Replacement Of Bull Gears ( Partially ) If Required. K. Checking / Repairing Of Splice Joints Of Structures. L. Checking / Repairing Of Otls, Cam Switch Etc. M. Checking / Repairing Of Brake Shoes. N. Greasing Of Bearings By Grease Gun. O. All Points Of 02 Weekly & 04 Weekly Checks. 10.630 ) . Code: Fhwgt00gn402 Inspection Of Wagon Tippler / Calibration ( Completion Period-04 Hours ) A. Checking Of Ls & Hs Coupling Bolts. B. Checking Of Gear Box Oil Level. C. Checking Of Structures ( Ballast Container , Way Bridge Rail Table, Etc. ) D. Checking Of Pinions. E. Checking Of Connecting Shafts. F. Checking Of Pawl Lever. G. Checking Of Spill Plates & Rollers. H. Checking Of Civil Foundations. I. Checking Of All Plummer Blocks. J. Checking Of Bull Gears. K. Checking Of Splice Joints Of Structures. L. Checking Of Otls, Cam Switch Etc. M. Checking Of Brake Shoes. N. Checking Of Top Stop Clamps And Side Supports & Rubber O. Checking Of Photo Sensor For Operation. P. Weigh Bridge & Load Shell Checking 10.640 . ( Fhscc00gn402 ) Crushers / Vibrating Screen ( <> ) Inspection ( A ) . Remove Top Cover Of The Secondary Crusher To Facilitate Internal Inspection & Cleaning. ( B ) . Replace Missing / Loose / Broken Fasteners Of The Breaker Plate / Cage Screen / Kick Off Plate / Tramp Iron Tray / End Disc Liner Etc. ( C ) . Refix The Same After Work Is Over. Or ( A ) .Check The Condition Of Support Springs And Do The Necessary Adjustment / Replacement. ( B ) . Check And Rectify The Defect In The Tray And Its Structural Members. ( C ) . Check Receiving And Discharge Chute Liners And Report. Rectify Minor Repair In The Coffin Box. ( D ) . Replace The Worn Out Skirt Rubber / Dust Curtain. ( E ) . Any Other Minor Work Has To Be Carried Out As Per Direction Of Eic. 10.650 Fheoh00oh000 ( Elec Hoists ( <> ) Serv ) A ) . Placing The Hoist At Suitable Position For Maintenance And Arrange Proper Approach For Maintenance ( B ) . Opening The Housing Drum Cover Of Hoist. ( C ) . Checking Of Gears / Gear Box Internals. Repair / Replace As Required. Clean And Grease All The Gears ( D ) . Checking, Cleaning & Lubricating The Bearings. Replace The Bearings, If Reqd. ( E ) . Checking The Rope Drum & Repair / Replace The Parts As Required. Lubricate The Parts Needing Lubrication. ( F ) . Checking The Rope For Any Defect And Broken Strands, Replace The Rope If Required. Clean, Lubricate The Rope. ( G ) . Checking The Load Hook Block Assembly. Clean & Grease The Parts. Attend The Defect. Also Check The Hook For Any Cracks / Deformation. ( H ) . Cleaning And Greasing Guide Ring And Retaining Ring To Ensure Rotation / Reeling. ( I ) . Checking Of All The Bolts, Nuts And Tension Bar Ensuring Proper Tightness And Good Condition. ( J ) . Check The Travel Wheel And Its Mechanism And Repair / Replace As Required. ( K ) . Take Trial Of Hoist On Both The Ends. Ensure Proper Mechanical Stopper. Also Check The Hoist Operation By Lowering / Raising As Per Limit. ( L ) . Ensure Proper Braking Of Hoist On No Load As Well On Load Both. ( M ) . Checking Of Hoist For Any Other Defect And Rectify The Same. 10.660 ( Fhsai00gn869 ) Self Algn Idlr ( <> ) Servicing ( Servicing Of Trainer Idler / Repair Of Carrying / Return / Impact Idlers ) Completion Time - 02 Hours. Defect Liability Period - 03 Months. For Payment Purpose Repair Of One Idler Or One Self Adjustable Frame Will Be Considered As One Unit. ( I ) Servicing Of Trainer Idler ( A ) Removal Of Self-Aligning Troughing Trainer & Return Side Trainer Complete Assembly From Its Position. ( B ) Over-Haul The Pivot Bearing & Bush By Cleaning The Old Grease With Solvent / Cleaning Agent, And Then Regrease The Bush / Bearing. If Required, Replace The Bearing. ( C ) Separate Cloth To Be Used For Removing The Old Grease, And Wiping Off The Solvent From The Bearing To Avoid Contamination. ( D ) Optimum Grease To Be Used Such That The Pivot Bush / Bearing Is Properly Lubricated. Grease Shall Not Be Wasted By Overfilling In The Housing. ( E ) Re-Fix The Complete Frame Back In Its Position, And Properly Tighten The Bolts. If The Bolts Are Damaged, Or Missing, Then New Bolts Are To Be Fixed So That The Frame Is Properly Secured. ( F ) Grease, Bush / Bearing & Fasteners Shall Be Provided By Ntpc. Rest All The Materials & Tools For Cleaning To Be Provided By The Contractor. ( G ) After Complete Servicing Of The Self-Adjusting Idlers, Clean The Deposited Coal On The Surface Of Remaining Rollers By Soft Hammering And Poking. ( H ) If Required, Rollers Are To Be Removed From The Frames For Cleaning, Coal To Be Cleaned From The Frame Slots, And Near Bearing Housing & Then Fixed Back. ( I ) If Required, Also Check The Rollers Of The Assembly For Their Freeness, And If Jammed Or Damaged, Rollers Shall Be Replaced. Payment For Roller Replacement Shall Be Made Separately. ( Ii ) Repair Of Carrying / Return / Impact Idlers ( A ) . Shift Damaged Rollers From Site Or Wherever Dumped To Work Location. ( B ) . Dismantle Roller Internals Like Seals, Bearings, And Shaft Etc. ( C ) . Clean Roller Internal Properly. ( D ) . Select Roller Shells In Good Condition. ( E ) . Repair Damaged Shaft By Cutting / Welding / Grinding. ( F ) . Assembly Of Roller With New / Good Condition Bearings, Seals, Bushes And Circlips And Check Freeness. ( G ) . Apply One Coat Of Red Oxide Primer Over The Roller Surface And Put Serial Number On The Same. Total Quantity :
Contract Date: Ref. Documents Contract Value : 1.91 Crore
Boards / Undertakings / PSU No of Bidders 17
27.
Defence #3668808 AOC
Tender For Provision Of Klp (Ph-Iii Of Iii Phase) Under Ge (East) Agra.; 1 Sch A Part-I (Building Work)Note :This schedule is pre-priced by MES and the pre-priced rate indicated are under Col. 5. 2 Total amount of Sch A Part II (Site clearance, Excavation and Earth work) 3 Total amount of Sch A Part III (Internal Water Supply) 4 Total amount of Sch A Part IV (Internal Electrification) 5 Total amount of Sch A Part V (Road, Path and Haed Standing) 6 Total amount of Sch A Part VI (Area Drainage) 7 Total amount of Sch A Part VII (Sewage Disposal) 8 Total amount of Sch A Part VIII (Rain Water Harvesting) 9 Total amount of Sch A Part IX (External Water Supply) 10 Total amount of Sch A Part X (External Electrification) 11 Total amount of Sch A Part XI (Conduit And Wiring For Tele/TV) 12 Total amount of Sch A Part XII (Lightening Protection) 13 Total amount of Sch A Part XIII (Earthing for Over Head Crane (EOT)) 14 Total amount of Sch A Part XIV (Dismantling/Demolition) 15 Sch A Part - XV(Miscellaneous Items)Note - This Schedule is not pre-priced by MES and the pre - priced rate indicated as Rs 0.00 under col.5 siginifies this fact only. 16 INTERNAL WATER SUPPLYS&F for two way Angle cock/ stop valve, fancy type, chromium plated, ISI marked with crutch or butterfly handle, screwed down, screwed for iron pipe and fixed to 15mm bore pipeand fixed complete all as specified and as directed. 17 S&F for 3 in 1 , CP wall mixture for mixing hot and cold water with overhead shower arrangement screwed down for iron pipe and and fixed for 15mm bore pipecomplete all as specified and as directed. 18 S&F Shower rose, brass, chromium plated 125 mm size with or without swivel joints, any size, including 450mm longh CP Shower arm fixing to steel pipe or union complete all as specified and directed. 19 S&F for health faucet with 1.50 m long cord,chromium plated suitable for 15mm dia pipe including fixing of brackets complete all as specified and as directed. 20 INTERNAL ELECTRIFICATIONM&L for point wiring complete forOne light/Fan/Exhaust fan/Bell pointcontrolled by one switch with PVC insulated and unsheathed FRLSH cable 1.5 sqmm (nominal area), ISI marked,multi stranded copperconductor cable including ISI marked not less than 20mm dia medium grade PVC conduit concealed in wall , MS conduit in roof/floors, factory made pressed steelconcealed terminal boxes not less than 1.6mm thick of reqd size and with top cover 3mm thick of plastic laminated sheets of required colour complete,including 1.5 Sqmm PVC ,FRLSH cableinsulated unsheathed multi stranded copper earth wire to the common earth and connecting to earth dolly,including colour coding of cable shall be Phase-red,Neutral-black and Earth- green with all accessories and complete all as specified and directed.Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost. 21 M&L for point wiring complete for One light pointcontrolled by two2-way switches with PVC insulated and unsheathed FRLSH cable1.5 sqmm (nominal area), ISI marked,multi stranded copperconductor cable including ISI marked not less than 20mm dia medium grade PVC conduit concealed in wall , MS conduit in roof/floors, factory made pressed steelconcealed terminal boxes not less than 1.6mm thick of reqd size and with top cover 3mm thick of plastic laminated sheets of required colour complete,including 1.5 Sqmm PVC ,FRLSH cableinsulated unsheathed multi stranded copper earth wire to the common earth and connecting to earth dolly,including colour coding of cable shall be Phase-red,Neutral-black and Earth- green with all accessories and all as specified and directed.complete .Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost. 22 M&L for point wiring complete for One 5 pin 5 Amp switch socket out let point on an independent board with PVC insulated and unsheathed FRLSH cable2.5 sqmm (nominal area), ISI marked,multi stranded copperconductor cable including ISI marked not less than 20mm dia medium grade PVC conduit concealed in wall , MS conduit in roof/floors, factory made pressed steelconcealed terminal boxes not less than 1.6mm thick of reqd size and with top cover 3mm thick of plastic laminated sheets of required colour complete,including 2.5 Sqmm PVC ,FRLSH cableinsulated unsheathed multi stranded copper earth wire to the common earth and connecting to earth dolly,including colour coding of cable shall be Phase-red,Neutral-black and Earth- green with all accessories complete for max four nos socket outlets all as specified and directed. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost. 23 M&L for point wiring complete with PVC insulated and unsheathed, FRLScable 2.5 sqmm (nominal area), ISI marked, stranded copperconductor single core including ISI marked 20mm dia PVC conduit concealed in wall and MS conduit in roof/floor slab & ceiling, pressed GI concealed terminal boxes not less than 1.6mm thick of reqd size and with top cover 3mm thick of plastic laminated sheets of required colour complete, including 2.5 Sqmm, FRLS cablePVC insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all for max two nos socket outlets all as specified and directed. Note :- In case of roof/ceiling, heavy duty pipe shall be used without any extra cost. 24 S&F switch flush type 5/6 Amps single pole two way complete all as specified and dierected. 25 Supply and fix PVC / polycarbonate angle type holder suitable for LED Bulb & including LED bulb 9Watt, B22 AC 220V complete all as specified and dierected. 26 S&F LED batten Tube light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <20W (4 FT 20 W), luminaire lumen >2000 lm, system efficiency of >120 lumens /W, with LED binning as per ANSIBin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification.complete all as specified and directed. 27 S&F LED batten Tube Light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <10W (2 feet 10 W) luminaire lumen >1000 lm, system efficiency of >120 lumens /W, with LED binning as per ANSIBin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification.complete all as specified and directed. 28 S&F LED Building security light fitting with aluminum pressure die cast housing, high purity PC Fresnel diffuser with silicon gasket for IP-65 protection, power consumption <25 W (25/30W) & luminaire lumen >2500 lm and system efficiency > 120 lm/W, in built electronic driver prewired upto terminal block with driver efficiency >85% power factor >0.95 as light source with toughened glass including two core flexible copper wire of 1.5 sq mm from ceiling rose to the connector of fitting, connection wires not to be more than 2.5 in length and made out of GI tubing 25/32 mm dia /suitable dia light grade bend to shape security light fitting with necessary MS clamp 25 mm wide and 6 mm in thickness in suitable length not more than 30 CM and max length of pipe 1.5 Mtr long with one code of anti corrosive primer and two coats aluminum paint including nuts, bolts and washers complete all as specified and directed. 29 Supply and fix LED high bay light 120watt , 5000K/6500K , IP-65, IK-08, CRI >80, surge protection 4kv, driver efficiency >93% suitable for AC 220V 50 Hz, efficacy 125lm/watt optionally for DALI dimming for even further saving with toughned glass and mounting accessories, in built driver circular, square or retangular shape duly electrical connection with proper size of coppet wire complete all as specified. 30 Supply and fixingBLDC type Ceiling fan 1200 mm sweep five star rated single phase 230V AC, Min 220 CFMwith fan remote , five star rating and ISI marked alongwith steel down rod and connecting up the fan to ceiling roseincluding PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit from celling rose to ceilingfan motor not less than 0.5 mtr long for connection complete all as specified.Note:- Necessary Fan hook deemed to be included in item rate. 31 Supply and fixingExhaust Fan high quality mettalic body, resistant to colour change 300 mm sweep five star rated, 900 RPM with approved colour and with louver shutter complete including providing/cutting the round hole of required size in wall, fixing the frame and exhaust fan including fixing of louver shutter with frame on the exhaust side(outer surface of wall) and cutting with and including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit pipefrom celling rose to exhaust fan motorcomplete all as specified and directed. 32 Supply and fixingExhaust Fan high quality mettalic body, resistant to colour change 450 mm sweep five star rated, min 900 RPM with approved colour and with louver shutter complete including providing/cutting the round hole of required size in wall, fixing the frame and exhaust fan including fixing of louver shutter with frame on the exhaust side(outer surface of wall) and cutting with and including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit pipefrom celling rose to exhaust fan motorcomplete all as specified and directed.(for hanger only) 33 Supply and fixingAir Circulator Fan 600 mm sweep five star rated, 1400 RPM heavy duty metal body wall mounted type with bracket, aerodynamically designed & balanced blade 3 nos having double ball bearing ZZ (permanent lubricated) for longer life and minimum noise level, with approved colourcomplete including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit pipefrom celling rose to exhaust fan motorcomplete all as specified and directed. 34 S & F sheet metal enclosure single pole and neutral with two pin (for AC point) with earth terminal complete incl one no MCB SP 20/25 amp 10KA complete all as specified and directed. 35 S&F MCCB 4 pole 415 V AC 50 Hz fixed type 125 -160 amps with breaking capacity 16 KA complete all as specified and directed. 36 S&F MCB TPN 63 amp 4 P 415 V AC 50 Hz fixed type 63 amps with breaking capacity 10 KA complete complete all as specified and directed. 37 S&F MCCB VTPN DBdouble door type, 415 Volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated ,powder coated complete with out MCCBand with enclosure blank plates for unused way suitable for 4 way complete all as specified and directed. 38 S&F MCCB TPN DBdouble door type, 415 Volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated ,powder coated complete with out MCCBand with enclosure blank plates for unused way suitable for 4 way complete all as specified and directed.. 39 Supply and fixingMCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated ,powder coated complete with out MCBand with enclosure blank plates for unused way suitable for 4 wayall as specified and directed . 40 Supply and fixingMCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated ,powder coated complete with out MCBand with enclosure blank plates for unused way suitable for 8 way all as specified and directed . 41 Supply and fixingMCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated ,powder coated complete with out MCBand with enclosure blank plates for unused way suitable for 12 way ISI marked all as specified and directed . 42 S&F MCB SPN 32/40 Amps B series,10 KA 240 Volts ,AC ISI marked all as specified and directed . 43 S&F MCB 6-32 Amps single pole,240V/415 V, B Series, 50 Hz ,ACwith breaking capacity 10 KA , complete all as specified and directed. 44 M&L submain wiring with two single core 4 sqmm FRLSH copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in PVC conduit not less than 25 mm dia medium grade ISI marked concealed in wallsurface / ceiling for sub main connection including 4 sqmm FRLSH one single corePVC insulated multistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified and directed. Note:- Two single core 4 sqmm copper conductor for phase / neutral, one run PVC conduit and one run of 4 sqmm earth wire shall be considered & measured as one unit. 45 M&L submain wiring with two single core 6 sqmm FRLSH copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in PVC conduit concealed in wallsurface / ceiling for sub main connection including one 6 sqmm FRLSH one single core PVC insulated multistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified and directed. Note:- Two single core 6 sqmm copper conductor for phase / neutral, one run PVC conduit and one run of 6 sqmm earth wire shall be considered & measured as one unit. 46 M&L submain wiring with four single core 6 sqmm FRLSH copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in PVC conduit not less than 32mm dia mediumgrade concealed in wallsurface / ceiling for sub main connection including one 6 sqmm single core FRLSH PVC insulated multistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified and directed. Note:- four single core 6 sqmm copper conductor for phase / neutral, one run PVC conduit and one run of 6 sqmm earth wire shall be considered & measured as one unit. 47 M & L Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground.(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr. belowground level connecting to galvanised earth lead wire 4.0 mm diaas earth lead upto 7.5 meters long connected by means of bolts, check nuts and washers of GI and earth wire protected by provision of GI pipe medium grade, 15 mm bore including provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 40 x 40 x 3mm fixingwith 6mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge plate, common salt and charcoal filling, with fixing arrangement, funnel, wire mesh and earth work in hard / dense soil, returning filling in and removal of surplus soil to a distance not exeeding 50 mtr, all as per electrical plate No 3 of SSR 2009 Part-I and connection all as specified and testing on completion. Note: The cost of excavation and earth work, PCC pit and pit covers, funnel and watering pipe, wire mesh, charcoal dust and common salt,20/ 40mm dia, medium grade, GI pipe as protection to GI wire 4.0 mm as main earthing lead from earth electrode to main TPN MCCBs DB/MCB DB/ test point length not less than 7.5mtrs) shall be deemed included in the unit rate for earthing and testing complete all as specified and directed . 48 Taking down old U/S service connection/sub main wiring of any description of aluminium/copper conductor including batten/conduit/suspension wire etc and making good disturbed surface to match the existing surface. 49 Taking down old U/S DB with MCBs/Main switches/MCB SP/SPN of any description and in any position. 50 Taking down old U/S light fitting of any type and size complete all as directed 51 Taking down old U/S service wire of any type and size complete all as directed 52 ROAD, PATH AND HARD STANINGM&L for preparation of road surface and applying thermoplastic reflective paint for marking of minimum 2mm thick single coat as a centre line or edge line etc. road marking of painting lines, dashes,arrows,letters etc on roads pavement and the like exc 10cm wide with road marking paint,white or golden yellow etc complete all as per manufacture instruction and specified and directed 53 S&Fin repair 60 cm dia 2.5 thick and over convex mirror fixed with6.75 feet longpole with coping of size 30 cm x 30 cm x45 cm size including50x50x6mm thick size T- Section including earth work and cement concrete 1:2:4 Type B-1 (using 20mm graded stone aggregate)and all necessary fitting and fixures to fix the convex mirror complete all as specified and directed. 54 SEWAGEDISPOSAL Construction of RCC Septic tank conventional typefor 50 users designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole opening with cover connection etc complete with effective depth of 1.5 m and overall depth of 3 m complete all as specified and directed. 55 Construction of RCC Septic tank conventional typefor 100 users designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole opening with cover connection etc complete with effective depth of 1.5 m and overall depth of 3 m complete all as specified and directed. 56 Construction of RCC Septic tank conventional typefor 150 users designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole opening with cover connection etc complete with effective depth of 1.5 m and overall depth of 3 m complete all as specified and directed. 57 Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.8 m dia x 3.00 m effective depth complete all as specified and directed. 58 Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.40 m dia x 3.00 m effective depth complete all as specified and directed. 59 Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3 m dia x 3.00 m effective depth complete all as specified and directed. 60 Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3 m dia x 4.50 m effective depth complete all as specified and directed. 61 RAINWATER HARVESTINGSupply and filling 100mm to 200mm sixe boulder for recharge pit from Lal gun quarry complete all as specified and directed. 62 Supply and filling 40mm to 63mm sixe boulder for recharge pit from Lal gun quarry complete all as specified and directed. 63 Supply and filling coarse sand for recharge pit coplete all as specified and directed. 64 M & L pea Gravel packingof size06 to 10mm for trailbore of size to be designed by the contractor natural shape brought direct from river bed and packing around the casing pipe to entire depth upto ground level complete all as specified and directed. 65 S&F 100mm bore PVC U type air bend coplete all as specified and directed. 66 Drilling bore well of 200mm dia upto 60mtr dedpth in any type of soil for lowering to the PVC pipe complete all as specified and directed. 67 M&L plain PVC Pipe, 100 mm dia bore as per IS 12818 including lowering and jointing complete all as specified and directed. 68 M&L PVC slotted 110mm bore single socketed (6mtr lenth) of pressure 6 kg/sqcm and lower to boreas per IS 12818 including all fitting complete all as specified and directed. 69 S&F PVC bail plug for 110mm outer dia complete all as specified and directed. 70 S&F PVC well cap for 110mm outer dia complete all as specified and directed. 71 Development of bore well by air compressor having capacity 450/150 CFM/PSI complete all as specified and directed. 72 S&F PVC pipe 160mm outer dia , single socketed of pressure 6 kg/sqcm in any length with rubber ring joints laid in trenches or in floor including all fitting completeall as specified and directed. 73 S&F stainless steel sheet for screen chamber of thickness 16 gauge with rounded punched holes of 15 mm dia and area of each screen chamber not exceeding1.00 Sqm fixed with angle grooves and removeable with one end (top end) having additional thickness for holding for cleaning purpose complete all as specified and directed. 74 S&F stainless steel grating to cover the PVC pipe 110 mm outer dia with made of 8 mm dia SS bar(grade 504) with coller and aperture 50mm centre to centrecomplete all as specified and directed. 75 S&F for 150mm PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors with cement concrete bed of PCC (1:4:8) type D-2 using 40mm graded stone aggregate complete all as specified and directed. 76 S&F for 200mm PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors with cement concrete bed of PCC (1:4:8) type D-2 using 40mm graded stone aggregate complete all as specified and directed. 77 EXTERNAL WATER SUPPLY Supply, laying and jointing of ductile iron pipes with spigot and socket ends suitable for push on rubber tightened joint centrifugally cast, class(K-7), Inner side cement lining and outer side metallic zinc/black bitumen coating and any length , laid in trenches of 150 mm bore pipe including push on rubber (EODM) ring with ISI marked complete all as specified and directed. Note : (i) Please note cost of rubber tightened joints to be included in the above quoted rate. (ii) Excavation and earth work shall be masured and paid under respective schedule 78 Supply, laying and jointing of ductile iron pipes with spigot and socket ends suitable for push on rubber tightened joint centrifugally cast, class(K-7), Inner side cement lining and outer side metallic zinc/black bitumen coating and any length , laid in trenches of 100 mm bore pipe including push on rubber (EODM) ring with ISI marked complete all as specified and directed. Note : (i) Please note cost of rubber tightened joints to be included in the above quoted rate. (ii) Excavation and earth work shall be masured and paid under respective schedule 79 Supply and fixing of 150mm cast iron air release valve with drilled flanged ends, pressure rating (PN-1) and tamper proof with two air outlets with nuts, bolts and washer and conforming to IS-14845 complete all as specified and directed. 80 Supply and fixing of 100mm cast iron air release valve with drilled flanged ends, pressure rating (PN-1) and tamper proof with two air outlets with nuts, bolts and washer and conforming to IS-14845 complete all as specified and directed. 81 Supply and fix Sluice valve 150mm bore both ends flanged class PN 1.0 with stainless steel spindle and 01 No hand wheel including making new flanged joint with 3 mm thick rubber gasket (Packing ring) with necessary bolt, nuts and washer of suitable size necessary including testing complete all as specified and directed. 82 Supply and fix Sluice valve 80mm bore both ends flanged class PN 1.0 with stainless steel spindle and 01 No hand wheel including making new flanged joint with 3 mm thick rubber gasket (Packing ring) with necessary bolt, nuts and washer of suitable size necessary including testing complete all as specified and directed. 83 Supply and fix Sluice valve 50mm bore both ends flanged class PN 1.0 with stainless steel spindle and 01 No hand wheel including making new flanged joint with 3 mm thick rubber gasket (Packing ring) with necessary bolt, nuts and washer of suitable size necessary including testing complete all as specified and directed. 84 Taking up or down 80mm bore GI water tubing and connection for re-routing from trenches/floor etc complete all as specified and directed. 85 Laying only old GI water tubing 80mm bore in trenches/ floor including new GI fitting as directed.Note: GI water tubing obtained from items here-in-before. 86 Construction of fly ash brick masonry valve pit chamber of size 900 mm X 900 mm X 900 mm (internal dimensions) including necessary excavation & earth work,100 mm thick PCC (1:4:8) type D-2 as in foundation, 230 mm thick fly ash brick work in cement mortar (1:4), 12 mm thick rendering in cement mortar (1:4)on internal surface of valve pit and mild steel sheet cover of 6 mm thick and angle iron of size (50 x 50 x 6) mm frame around of valve pit, sheet welded on all four corners, locking arrangement with pad lock of size 50 mm brass, 6 levers and in duplicate key (Make - Godrej or equivalent make as approved by GE complete) including two coat of approved synthetic enamel paint over one coat of red oxide primer on prepared steel surface complete all as specified and directed. 87 EXTERNAL ELECTRIC SUPPLY :Supply, Installation, Testing and commissioning of transformer outdoor type step down transformer 11 kV/0.433 kV energy efficient, plint mounted,AC 3 phase 50 Hz, 100 KVA capacity, core type copper wound, on HV & LV coil immerse, naturally cooled, Oil Natural-Air Natural (ONAN) with external cooling tubes, delta connected on primary side (HV) and star connected on secondary side (LV) in accordance with vector group DYN-II with neutral brought out on secondary side (LV) and having 7 step tapping at +/ 2.5% of each step (+5% to 10%) on HV side to be charged by means of hand operated OFF load tap change gear, the maximum temperature rise should not exceeds 45 degree celsius in oil and 55 degree celsius in HV/LV winding when measured by resistance method after continuous full load run on and ambient temp of 40 degree celcius the transformer shall be in accordance with IS-1180 (Part-I) 2014 latest amendment No 1,2,3 & 4 (Level-2) including cable terminationbox for transformer connection both HV and LV side and comprises of the following : -(a)One cable end termnation box on HT/LT (both side) consisting of suitable Nos of porcelain bushing with copper rods complete with nuts, bolts and washers. (b)Oil conservator with filter type drain valve and oil level gauge. (c)De-hydration breather wih filter fill of dehydrating agent (Silica gel). (d)Explosive vent, thermometer pocket on tank cover, oil drain filter valve, lifting lugs / hoks, oil filer hole with cap / plug with connection plate complte, air release valve plug and four Nos plain cast steel detchable roller. (e)One No. 100 mm, dial type thermometer, vapour pressure type having range 0-120 degree celsius with metal guard having maximum perimeter temperature reading indicator. (f)Two earthing terminal on tank cover to faciliate fixing of 50 X 6 mm galvanized iron eart strip for earthing of body.Note : PCC foundation of size 2.5 mtr x 2.5 mtr x 1.5 mtr heightshould be as per TD-699 Sheet 1/1 related TD drgs, fencing and gate around the transformer area.Cost of PCC fdn and fencing included in the quoted rates) 88 Supply and erecting Steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-55 of 11 mtr long, all as specified and shown on drawings including the followings:-(a) Excavation in post holes in any types of soil, returning filling, well ramming and disposal of surplus soil to a distance not exceeding 50 mtr from the starting points. (b) PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation including form work complete. (c) PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping including form work complete. (d) PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in base.(e)Painting of poles externally with one coat of black bituminous paint (upto planting depth) and above plinth block concrete collar with two coats of aluminium paint over one coat of red oxide primer including preparation of surface including painting of 30 cm wide bands 3 Nos with synthetic enamel paint of appropriate colour in alternate layer upto height of 1.5 m above plinth block.(f) Painting of coping shall be cement base paint complete all as directed.(g) Embeded portion shall be painted with two coat of black bituminous paint complete all as specified and directed.Note:- (i) This item consists of provision of steel pole and work mentioned in para (a) to (g) only. All other connected work, shall be measured and paid separately. 89 M&L for drilling suitable dia horizontal bore holes for insertion/ laying of upto 110mm bore HDPE pipe of any description below/under existing road surfaces/apron /floors etc with using mechanical and / or manual devices as required at site including making good the disturbed surfaces to match with the existing strata after laying pipes complete all as specified and directed. NOTE :(i)Pipes shall be laid minimum 60 cm below/under existing road surfaces/ apron /floors etc. (ii) Equipment,tools and plant material (horizontal boring rig machine) required for boring shall be arranged by contractor without any extra cost to the Govt. 90 Supply ,installation, testing and commissioningof canopy headed HT 11K volt grade, 3 phase , AC, 50 cycle, feeder pillar box, factory made CPRI approved and as per IS-61439 outdoor pedestal type double door, IP 65 protection with incoming and outgoing cable entry glands fabricated out of 3.15 mm thick CRCAsheet with powder coatedpaintingin side and outside of approved shade ,locking arrangementwith 02 Nos 19mm dia lock of make Godrej with keys, two earthy terminal suitable cable gland for all incoming and outgoing cable grouting of feeder pillar box 30 cm above ground level by providing 90 cm long angle iron of size 50x50x6 mm welded on all the four comers embedded in PCC (1:2:4) using 20 mm graded stone agg upto 30 CM deep and 45 CM above from normal ground levelcomplete all as specified and directedincl the following components:-(a) The panel will be havingaluminium bus bar of size 50x10mm duly insulated with heat shrinkable sleeves with porcelain HT long post insulator 11 KV, Complete all as specified and directed. 91 Supply and laying HDPE pipe double wall medium class, ISI Marked corrugated as in cable protection pipe of outer dia 110 mm including all fittings complete all as specified and directed. 92 Supply and erecting Steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 of 9 mtr long, all as specified and shown on drawings including the followings:-(a) Excavation in post holes in any types of soil, returning filling, well ramming and disposal of surplus soil to a distance not exceeding 50 mtr from the starting points. (b) PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation including form work complete. (c) PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping including form work complete. (d) PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in base.(e)Painting of poles externally with one coat of black bituminous paint (upto planting depth) and above plinth block concrete collar with two coats of aluminium paint over one coat of red oxide primer including preparation of surface including painting of 30 cm wide bands 3 Nos with synthetic enamel paint of appropriate colour in alternate layer upto height of 1.5 m above plinth block.(f) Painting of coping shall be cement base paint complete all as directed.(g) Embeded portion shall be painted with two coat of black bituminous paint complete all as specified and directed.Note:- (i) This item consists of provision of steel pole and work mentioned in para (a) to (g) only. All other connected work, shall be measured and paid separately. 93 Material and labour Cable Route indicator ISI marked showing MES HT U/G 11KVsize 1m height X 60cm wide X 10cm thick tapered on top)and route of cable with arrow (Embossed or engraved) made of RCC 1:2:4type B-0 (using 12.5 mm graded stone aggregate) 50 mm thick reinforced with 8 mm dia TMT bar at the rate of 100 mm centre to centre in suitable shape and size 60 cm x 30 cm x 50 mm thickfixed in PCC block 1:2:4 type B-2 (using 40mm graded aggregate) (size of block 30cmx 30x15cm)of 30 cm below ground level and 30cm above ground to show clear indication of cable including painting the complete slab with red paint and marking the engraved/embosed letters/arrow with white paint complete all as directed.Note :-Quoted rate shall be deemed to included the cost of excavation, returning, filling and removal of excavated earth upto a distance of not exceeding 30 mtr complete. 94 Material and labour Cable Route indicator ISI markedshowing MES LT U/G 1.1KVsize 1m height X 60cm wide X 10cm thick tapered on top)and route of cable with arrow (Embossed or engraved) made of RCC 1:2:4type B-0 (using 12.5 mm graded stone aggregate) 50 mm thick reinforced with 8 mm dia TMT bar at the rate of 100 mm centre to centre in suitable shape and size 60 cm x 30 cm x 50 mm thickfixed in PCC block 1:2:4 type B-2 (using 40mm graded aggregate) (size of block 30cmx 30x15cm)of 30 cm below ground level and 30cm above ground to show clear indication of cable including painting the complete slab with red paint and marking the engraved/embosed letters/arrow with white paint complete all as directed.Note :-Quoted rate shall be deemed to included the cost of excavation, returning, filling and removal of excavated earth upto a distance of not exceeding 30 mtr complete. 95 Supply and fixing LED street light fitting 70 Watt 230 V AC out-door type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection,fixed to pole or wall of building with and including suitableBracket made out of40 mm dia GIlightgrade pipe, 1.20 m long bent to shape by cutting & weldingas required & directed and fixed withtwo Nos of FI clamps 50x6 mm to be tightened with suitable size of bolts, nut and washers and including painted withtwo coat of aluminium paint over a coat of red oxide primer, and including connecting the fittingto electric sourcewith & including twin twisted copper flexible wire of size 1.5 sqmm three core with suitable size flexible PVC conduitincluding all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. 96 Supply and fix junction/looping box polycarbonate alongwith clamps complete,pole mounted right hinged looping box of size 155 x 210 x 92 with MCB SP 6 Amp capacity, copper bus bar-4 Nos fixed on ebonite insulator suitable capacity for 3 phase and neutral complete with necessary MS clamp made of 25 x3 mm MS flat, bolts, Nuts, washers etc for fixing to steel tubular /rail pole includingall accessories.complete all as specified and directed. 97 Supply and fix street light timer switchwith voltage mounting device enclcosed in SMC Enclosure for automatic and manual switching of street light based on LUX level of natural light , The sensor along with suitable power contactor MCB support terminal shell be housed in enclosure complete made out of anti rust/ shock proof/ termite proof/ confirming to IP 54 suitable for 5-8 KW (40 Amp) load compete allas specified and directed. 98 Supply and fix, New generation, IP 65 LED post-top lantern 40 W, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. 230 watt volts, AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp, Clear Cover offers bright illumination for different applicationscomplete all as specified and as directed. 99 Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel strip 32x6 mm as earth lead soldered and rivetedto earth plate by means of nuts, bolts, check nuts & washers, of galvanizediron or steelwith connected to test point and testing on completion including 40 mm pipemedium grade for earth leadprotection from earth point to earth plate, including provnadequate quantity of charcoal dust mixed with35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth platewith 20mm bore GI Pipe medium grade for watering,GI check nut, funnel and wire meshwith and includingall necessary excavation& earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor. 100 Supply, install, testand commissioning of Outdoor cubical type LT feeder pillar box, factory made, dust and vermin proof, double door (front and back openable by keyy from both side fancy locks), cubical and duly fully compartmentalized and separation from each control switchgear, 415 volts, AC, 50 Hz, IP-54, fabricated with 3.15 mm thick CRCA sheet for outer side and 2mm thick inside complete with and including mounted on angle iron frame stand of size 50 x 50 x 6 mm thick 50 cm long leg, grouted in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate), spray painted inside and outside, having seven tank treatment process for powder coating, enclosed bus bar chamber with aluminium bus bar (04 Nos)of rating not less than 1.5 times of incomming , mounted on PVC insulators, electric connection complete withfrom MCCB to main bus bar, cable glands, thimble complete with and including openable shutters butt hinged, locking arrangement including PCC work, excavation & earth work complete and comprising supply and fixforfollowing etc complete all as specified and as directed:- Incoming : (a) Aluminium busbar chamber comprising 4 Nos strip PVC insulatedwith current capacity 400 Ampwith stand heat shrinkable sleeking alongwith shrouds for joints, PVC sheathed with colour coding(b)Incommer MCCB, 4 polehaving current ratings 200 Amps, AC 415 Volts, withIcu= 25 KA ,Ics = 100% ofIcu,with thermal magnetic release, complete with spreader links-Qty - 01 No(c) Multifunctional digital panel meter with LCD display flush mounting type of size 96X96 mm, accuracy class 1, suitable for CTs with secondary current 5A,Outgoing :(a)MCCB, 4 polehaving current ratings 100 Amps, AC 415 Volts, withIcu=16 KA, Ics = 100% ofIcu, with thermal magnetic release,complete with spreader links- Qty -02 Nos(b)MCB, DP 6 Amp, C Curve,240 volts, 10 KA - Qty - 01 No 101 Supply, install, testand commissioning of Outdoor cubical type LT feeder pillar box, factory made, dust and vermin proof, double door (front and back openable by key from both side fancy locks), cubical and duly fully compartmentalized and separation from each control switchgear, 415 volts, AC, 50 Hz, IP-54, fabricated with 3.15 mm thick CRCA sheet for outer side and 2mm thick inside complete with and including mounted on angle iron frame stand of size 50 x 50 x 6 mm thick 50 cm long leg, grouted in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate), spray painted inside and outside, having seven tank treatment process for powder coating, enclosed bus bar chamber with aluminium bus bar (04 Nos)of rating not less than 1.5 times of incomming , mounted on PVC insulators, electric connection complete withfrom MCCB to main bus bar, cable glands, thimble complete with and including openable shutters butt hinged, locking arrangement including PCC work, excavation & earth work complete and comprising supply and fixforfollowing etc complete all as specified and as directed:-Incoming : (a) Aluminium busbarchamber comprising 4 Nos strip PVC insulated with current capacity 600 Ampwith stand heat shrinkable sleeking alongwith shrouds for joints, PVC sheathed with colour coding(b)Incommer MCCB, 4 polehaving current ratings 320 Amps, AC 415 Volts, withIcu= 25 KA ,Ics = 100% ofIcu,with thermal magnetic release, complete with spreader links-Qty - 01 No(c) Multifunctional digital panel meter with LCD display flush mounting type of size 96X96 mm, accuracy class 1, suitable for CTs with secondary current 5A,Outgoing :(a)MCCB, 4 polehaving current ratings 100 Amps, AC 415 Volts, withIcu=16 KA, Ics = 100% ofIcu, with thermal magnetic release,complete with spreader links- Qty -05 Nos(b)MCB, DP 6 Amp, C Curve,240 volts, 10 KA - Qty - 01 No 102 Supply, install, testand commissioning of Outdoor cubical type LT feeder pillar box, factory made, dust and vermin proof, double door (front and back openable by key from both side fancy locks), cubical and duly fully compartmentalized and separation from each control switchgear, 415 volts, AC, 50 Hz, IP-54, fabricated with 3.15 mm thick CRCA sheet for outer side and 2mm thick inside complete with and including mounted on angle iron frame stand of size 50 x 50 x 6 mm thick 50 cm long leg, grouted in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate), spray painted inside and outside, having seven tank treatment process for powder coating, enclosed bus bar chamber with aluminium bus bar (04 Nos)of rating not less than 1.5 times of incomming , mounted on PVC insulators, electric connection complete withfrom MCCB to main bus bar, cable glands, thimble complete with and including openable shutters butt hinged, locking arrangement including PCC work, excavation & earth work complete and comprising supply and fixforfollowing etc complete all as specified and as directed:-Incoming : (a) Aluminium busbarchamber comprising 4 Nos strips PVC insulatedwith current capacity 400 Ampwith stand heat shrinkable sleeking alongwith shrouds for joints, PVC sheathed with colour coding(b)Incommer MCCB, 4 polehaving current ratings 200 Amps, AC 415 Volts, withIcu= 25 KA ,Ics = 100% ofIcu,with thermal magnetic release, complete with spreader links-Qty - 01 No(c) Multifunctional digital panel meter with LCD display flush mounting type of size 96X96 mm, accuracy class 1, suitable for CTs with secondary current 5A,Outgoing :(a)MCCB, 4 polehaving current ratings 63 Amps, AC 415 Volts, withIcu=16 KA, Ics = 100% ofIcu, with thermal magnetic release,complete with spreader links- Qty -02 Nos(b)MCCB, 4 polehaving current ratings 32 Amps, AC 415 Volts, withIcu=16 KA, Ics = 100% ofIcu, with thermal magnetic release,complete with spreader links- Qty -03 Nos (c)MCB, DP 6 Amp, C Curve,240 volts, 10 KA - Qty - 01 No 103 CONDUIT AND WIRING FOR TELE/TVM&L for point wiring with telephone cable copper conductor FRLSH, Two pair, 0.50 sqmm, P.V.C. insulated and sheathed , anti termite, colour coded twisted pairs and rip cord, Double outlet The length of telephone cable upto 07 meter length or less as per site condition.Complete all as specified and directed. Note : PVC Conduit should be measured seperately in respective items 104 M&L for point wiring with Coaxial cable copper conductor FRLSH, P.V.C. insulated and sheathed , anti termite, colour coded twisted pairs and rip cord, Double outlet The length of coaxial cable upto 07 meter length or less as per site condition.Complete all as specified and directed.Note : PVC Conduit should be measured seperately in respective items 105 Supply and fixing modular telephone jack RJ-11, ISI marked white colour fixed in 1 M box fitted in Robust designed assembly plates smug fit on the wall, Dust Free Glossy Finish including pressed GI concealed terminal boxes not less than 1.6 mm thick, inner plate and outer cover, finger proof terminals with captive screws having front fixing & removing features without removing plates complete all as specified. 106 Supply , installation, testing & commissioning of single phase two wire, 240 volts,10-60Amps, accuracy class1.0 with transparent polycorbonate box BIS makin, single source Pre-payment meter, having dual facility of meter reading with hand held meter reading instrument including customer interface unit and having ABC code and inbuilt control switch for disconnection facilities with telephone wire drawing concealed PVC conduit medium grade of suitable size complete all as specified and directed. 107 Supply and fixing modular TV socket (RG-06), ISI marked, white colour fixed in 1 M box, fitted in Robust designed assembly plates smug fit on the wall, Dust Free Glossy Finish including of pressed GI concealed terminal boxes not less than 1.6 mm thick, inner plate and outer cover, all conforming to IS 3854 :1997 with finger proof terminals with captive screws having front fixing & removing features without removing plates complete all as specified. 108 LIGHTENING PROTECTION Materials and labour as in replacement for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel strip 32x6 mm as earth lead soldered and rivetedto earth plate by means of nuts, bolts, check nuts & washers, of galvanizediron or steelwith connected to test point and testing on completion including 40 mm GI pipe medium grade for earth leadprotection from earth point to earth plate, including provnadequate quantity of charcoal dust mixed with35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth platewith 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire meshwith and includingall necessary excavation& earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor. 109 OVER HEAD CRANE(EOT)Design, Supply, installation, testing and commissioning ofelectrically operated, overhead traveling (EOT) cranes of capacity 25 Ton, conforming to IS : 3177 (latest revision), with span of 15 mtrs (approx), height oflift 10-12 mtrs (approx), travel length 30.00 mtrs (approx), suitable for operation on 415 Volts, 3 Phase, 4 wires, 50 HZ supply, double girder box type, with necessary steel supporting structures with Hoist speed4mtrs / min, cross travel speed 5 mtrs / min, long travel speed 5 mtrs / min with VVVF drive alongwith motor of suitable capacity with control panel, power and controlling cables, confirming to relevant IS, controlled by pendent push button station and radio remote control switch of operation, with and including steel rope of suitable size dia , operation system hoist / cross travel/ long travel / electrically operated with pendent DSLof shrouded copper bus bar with wireless remote control system type complete all as specified and directed as per Annexure A to item No 15.94 of BOQ. Note:- (i) The design calculation of crane with relevant drg has to be got vetted from IIT / Govt. NIT and approved by CWE before fabricating of crane.(ii)Supply and fix gantry girder at the building bracket to be provided by the bidder as per direction of manufacturer of crane. Cost of fixing arrangement and supply of gantry gireder deemed to be included in quoted rates. 110 Designing, supplying, installing, testing and commissioning of hoist electrically operated Chain hoist of capacity 1 tons including control panel etc for Lift of 12.0 to 16 Mtrs, Class & duty - Class-II/Medium, Hoisting Motor TEFC of 960 RPM, Hoisting speed 4.0 Mtr/min approx, including hoisting break and hoisting limit switch, Fiber core wire rope confirming to IS: 2266 of suitable size complete all as specified and directed.Note :-(i) Hoist will be mounted on bottom cord of the truss/roof and all necessary clamping arrangement for mounting of EOT hoist will be provided by the bidder and cost is deemed to be included in the quoted rate.(ii) The design calculation of Hoist with relevant drg(the fixing arrangement to truss will be provided by OEM) has to be got vetted fromIIT/Govt. NIT and approved by CWE before fabricating of Hoist.(iii) Hoist operation shall be with pendant control with pendant of die cast or hard unbreakable plastic having push button for up & down movement on /off switches and stay put emergency stop switch. Pendant shall be hanged with chrome plated steel chain covered with sleeves.Note:- Input power supply shall be 415 ± 3% Hz, 3 Phase AC at main control board fitted with bldg and further electric cable connection for hoists shall be provided with suitable size of electric cable. Cost shall be deemed to be including in quoted rates. 111 Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel strip 25x4 mm as earth lead soldered and rivetedto earth plate by means of nuts, bolts, check nuts & washers, of galvanizediron or steelwith connected to test point and testing on completion including 32mm GI light grade pipe for earth leadprotection from earth point to earth plate, including provnadequate quantity of charcoal dust mixed with35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth platewith 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire meshwith and includingall necessary excavation& earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor. 112 REFRIGERATOR/DEEPFREEZER/WATER COOLER :Supply & fixing for Refrigerator with in-built stabilizer of capacity 310 liter ,230 volt, AC, 50 Hz , electric driven, single phase, frost free, smart inverter operation andas per latest BEE 5 star rated complete all as specified and directed. 113 Supply and fixing of metal Top Deep Freezer single phase 240 volt, 50 Hz of capacity 320 Ltr, BEE 5 Star ratings, double door, complete all as specified and directed. star rated, complete all as specified and directed. 114 Supply, installation, testing & commissioning of Water cooler fully Stainless steel(SS 304 grade), electric driven single phase 230 volt, 50 Hz having storage capacity 80 Ltrs & and nominal cooling capacity 40 Ltrs per hour, 100% copper cooling , as per latest versionincluding connection by means of water pipe line, inlet and outlet, PVC pipe connection with brass coupling, nuts at both ends and other necessary fittings including necessary electric connection with and including plug top 15 Amps from voltage stabilizer to water cooler complete all as specified and directed. 115 Supply and fixing ofheavy duty desert cooler PVC body,3-side high efficiency honeycomb pads with dust filters for pure healthy air, Robust weather resistant body for long life, Digital touchscreen & full function remote, Powerful 3 speed fan and empty water-tank alarm, Easily removable and cleanable cooling pads. Fully closable horizontal louvers, Float valve for auto water filling and lockable heavy-duty wheels, 110 m³/hr air delivery low power consumption - 185 watts, storage capacity of tank should not be less than 75 litrescomplete all as specified and directed. 116 Supply and fixing Voltage stabilizer for automatic operation, single phase naturallyair cooled indoor type & designed for input variation between 170 V to 270 V with outputvoltage stabilized at 230 V with accuracy of + 2.5 % and capacity 1 KVA complete all as specified and directed. Note for REFRIGERATOR/DEEPFREEZER/WATER COOLER Items(a)Minimum warranty 2 years on product, 10 years on compressor & 5 years condensor .(b)Item mfg date should not be older than 06 Months from installation date.(c)All items must have a permanent type vinyl sticker on outer body bearing following details and quoted rate are deemed to inclusive cost of sticker.(i)Machine Srl No._____________ (ii)MES No______________ (iii)Date set to work.____________(iv)PRB Page No ______________.(v) Location__________________(vi) CA No.________________________ 117 DG SET & VOLTAGE STABILIZERSupply, installation, commissioningand testing (load trail) of Diesel Engine driven Generating setof capacity 100 KVA as per IS -4722 with AMF panel (Auto mains failure ) recommended by DG set manufacturer , type 415 Volt 3 phase 4 wire system complete with relay panel for automatic starting on mains failure control panel having metersand floor mounted including acoustic enclosure canopy to ensure pollution free complying with all latest CPCB IV norms for pollution and noise with specificationas per Annexure B to item No 16.02 of BOQ . 118 Supply, Installation, commissioning & Testing of automatic out door type servo controlled voltage stablizer of capacity 100 KVA, Three phase,IP 55 Protection, 50 Hz Naturally Oil cooled type BIS certified,unbalanced type, copper wound, metallic body duly power coated with lifting hooks, digital display, relay free smooth and silent operation with 1stfilling of Transformer oil up to level, stablizer shall conform to BIS 9815 Pat 1-1994 and having specifidation as per Annexure A to item No 16.03 of BOQ . 119 FLOOD LIGHT AND HIGHWAY LIGHT FOR HANGERSupply and fixing LED flood light 70 watt, 230 V AC out door type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with electronic driver and lamp and average life of flood light should not be less than 50000 hours, including clamps, nut, bots, ETC,complete all as specified and directed. Note : The contractor shall submit two years of warranty of LED light fittings from the manufacturer alongwith Purchase Voucher 120 M&L for Submain wiring with two single core FRLSH 2.5 sqmm copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in conduit concealed in wallsurface / ceiling for sub main connection includingFRLSH 2.5 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to common earth and con-nection to earth dolly complete all as specified. (for connection to flood light and Higbay light)Note:- Two single core FRLSH 2.5 sqmm copper conductor, one run PVC conduit and one run of FRLSH 2.5 sqmm earth wire shall be considered & measured as one unit.In case of roof/ceiling, Stove enamelled conduit shall be used without any extra cost. 121 Supply and fixing MCB SPN 32 Amp rating 240V, 10KA C curve and current carrying ca-pacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 122 Supply and fixing MCB SP 6 to 32 Amp rating 240V, 10KA C curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. 123 Supply and fixing MCB TPN Isolator 100 Amp rating 415V, 10KA C curve and current carrying ca-pacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Contract Date: Oct 15, 2024 Contract Value : 28.06 Crore
Statutory Bodies & Commissions/Committees No of Bidders 6
Uttar Pradesh View Result →
Contract Date: Oct 01, 2020 Contract Value : 1
Government Departments No of Bidders 1
Maharashtra View Result →
Contract Date: Aug 11, 2023 Contract Value : 2.43 Lakh
Government Departments No of Bidders 2
30.
Defence #1829519 AOC
Tender For Repair / Replacement / Maintenance Of Misc Items Including Installation High Mast Lights, Eot Crane Solar Water Heater Systems And Water Heaters At Af Stn Bhisiana -Supply , Laying , Jointing And Testing In Replacementxlpe Insulated Screened Armoured Heavy Duty Electric Cable With Aluminium Conductor 1100 Volts Grade Of Size 16 Sq Mm 4 Core With Aluminum Thimble Of Same Size Complete All As Specified And Directed By Engineer In Charge. 2 Supply , Laying , Jointing And Testing In Replacement Xlpe Insulated Screened Armoured Heavy Duty Electric Cable With Aluminium Conductor 1100 Volts Grade Of Size 10 Sq Mm 4 Core With Aluminum Thimble Of Same Size Complete All As Specified And Directed By Engineer In Charge. 3 Excavation In Trenches Not Exc. 1.5 M Wide And Notexceeding 1.5M Depth For Foundation Of Poles / Laying Of Cables / Stay / Strut Etc Not Exceeding 10 Sq M On Planand Getting Out In Soft / Loose Soil Complete All As Specified And Directed By Engineer In Charge. 4 Returning, Filling Including Spreading, Leveling Watering And Well Ramming In Layers Not Exceeding 25 Cm Complete All As Specified And Directed By Engineer In Charge. 5 Removing Excavated Material ( Soil ) N.Exc 50M And Depositing Where Directed At A Level Not Exceeding 1.5 Mtr Above The Starting Point Complete All As Specified And Directed By Engineer In Charge. 6 M&L Sandcushioning ( Fazilka Dry Sand ) ) In Trenches / Ducts For Protection Of Ug Cables ( Below, Above And Around The Ug Cable Laid ) Of 23 Cm Spread Thickness ( 8 Cm In Depth Before Laying The Cable And 15 Cm In Depth After Laying The Cable ) And Consolidated ( Punned ) Upto 180Mm Thickness, Complete All As Specified And As Directed.Note : For The Purpose Of Payment, Punned Thickness Of Sand Cushioning Only Will Be Measured. 7 M&L For Brick Protection Cover Of Under Ground Cable By Old Size Bricks Common Burnt Clay Building Bricks Sub Class `B’ Laid Dry And Flat Abutting Each Other With Width Equal To Length Of Brick And Gap Between Adjacent Brick Not Exceeding 10Mm Complete All As Specified And Directed By Engineer In Charge. 8 Supply And Fix In Replacement Led Electronicdriver Suitable For 60 Watt Ledas Light Sources Incluing Taking Down And Old Fitting As Per Repairingrequirement Complete All As Specified & Directed By Engr-In-Charge. 9 Supply And Fix In Replacement Led Electronicdriver Suitable For 45 Watt Ledas Light Sources, Incluing Taking Down And Old Fitting As Per Repairingrequirement Complete All As Specified & Directed By Engr-In-Charge. 10 Supply And Fix In Replacement Led Post Top Lantern With Die Cast Aluminium Spigot, Spun Aluminium, Powder Coated Top Cover Acrylic Diffuser Ip 65 Protection Class Of 25 / 30 Watt Fitted On The Piller With The Help Of Gi Pipe / Pcc Work / Nut Bolts And Connection With 2.5 Sqmm 3 Core Copper Cable Including All Fixing Accessories Complete All As Specified And Directed Engr-In-Charge. 11 M&L In Replacement For Highly Efficient Led Street Light 90 Watt Luminaries New Generation Energy Saving & Environment Friendlywith Lens Made Of Pressure Die Cast Aluminium Alloyhousing Lm24 For Gear And Exturded Alluminium Lamp Housing & Enclouser With Toughened Glass With Ip-66 Of Protection Class, With High Power Leds As Light Source Having Luminous Efficiency Should Be > 80Lm / W With Active Power Factor Correction ( Apfc ) Electronic Gear ( Heat Shrink For Better Heat Transmission ) .It Shall Have Epoxy Powder Coated Grey Finish Phosphochromate Treatment And Operating Voltage Range Should Be Fron 120 Volt To 270 Volt Ac And Frequency Range 50Hz And Suitable For An Ambient Temparature From -40°C To 50 °Cand Humidity Level 10% To 90% Including Connection With Pvc Unsheathed Wirealuminium Conductor 3 X 1.5Sqmm Fitted On Pole / Building With Gi Bracket Of Suitable Size And Connection With 2.5 Sqmm 3 Core Wire Upto Bus Bar Of Oh Line / Pvc Jn Box / Lt Panel / Building For Connection Including Taking Down Of Unserviceable Light Fitting Of Any Type / Size Complete All As Specified And Directed Engr-In-Charge. 12 S&F Pvc Insulated Multi Stranded Copper Conductor Cable 1.5 Sqmm 3 Core, Round Flexible For Connection Of Street Light Fitting With Bus Bar And Flexible Conduit Including Taking Down Unserviceable Cable Of Any Description, Complete All As Specified And As Directed. 13 M&L In Replacement For Highly Efficient Integral Type Led Flood Light 60 Watt New Generation Energy Saving & Environment Friendly Made Of Pressure Die Cast Aluminium With Lens & Enclouser With Toughened Glass With Ip-66 Of Protection Class, With High Power Leds As Light Source Having Luminous Efficiency Should Be > 80Lm / W With Active Power Factor Correction ( Apfc ) Electronic Gear ( Heat Shrink For Better Heat Transmission ) .It Shall Have Epoxy Powder Coated Grey Finish Phosphochromate Treatment And Operating Voltage Range Should Be Fron 120 Volt To 270 Volt Ac And Frequency Range 50Hz And Suitable For An Ambient Temparature From -40°C To 50 °Cand Humidity Level 10% To 90% Including Connection With Pvc Unsheathed Wirealuminium Conductor 3 X 1.5Sqmm Fitted On Pole / Building With Gi Bracket Of Suitable Size And Connection With 2.5 Sqmm 3 Core Wire Upto Bus Bar Of Oh Line / Pvc Jn Box / Lt Panel / Building For Connection Including Taking Down Of U / S Light Fitting Of Any Type / Sizecomplete All As Specified And Directed Engr-In-Charge. 14 M&L For Scraping Down And Removing Of Old Deteroirated Paint From Existing Steel Tubular Poles Above Ground Level, Preparing Surface For Painting, Applying Two Coats Of Aluminium Paint Upto Full Height Of Pole Including Ms Clamps, Gi Brackets, Fittting Etc.Complete All As Directed At Site Including Black And White Strips Of30cms Each Upto 1.5 Mtrs Above Pccwith Black And White Paint And Marking Of Pole No. 2 Mtr Above Pcc , Cutter Shoud Not Be Long Than 6 Cms Height As 16 Cm Dia Circle Around The Marker Number Complete All As Directed By Engr-In-Charge. 15 M&L In Replacement For Time Light Distribution Board Switches Of Capacity 65 Amps Digitial Timer Box Including- ( I ) Contactor Rating 65 Amp 3Pole / 230V, ( Ii ) Digital Timer Programmable Type And ( Iii ) Mcb 65 Amp Tpn, ( Iv ) Copper Wiring Required For Connections ( V ) Selecter Switch. The Timer Box Out Door Type, Mounted On Gi Angle Iron Frameof Size 25X25x4mm Grouted In Cement Concrete, Including Necessary Excavation And Earth Work, Connection Of Lt Ug Cable.Complete All As Specified And Directed By Engr In Charge. 16 M&L For Welding Of Existing Lt Panel / Bus Bar Chamber / Junction Boxes With The Help Of Welding Machine, After Filing Nuts, Bolts, Etc. Includinglocking Arrangement And Applying One Coat Of Synthetic Enamel Ivory Paint ( Smoke Grey ) To Steelsurface After Disconnecting The Electrical Connections And Reconnection The Same At Various Sitesby Taking Safety Precautions After Painting Complete As Specified And Directed By Engr-In-Charge. 17 M&L In Replacement Earthing Complete With Galvanized Steel Earth Plate Electrode 600X600x6 Mm Thick Buried Directly In Ground ( Earth Pit Not Less Than 2.25 Mtr Deep Below Normal Ground Level ) With Top Edge Of The Plate Not Less Than 1.5 Mtr Below Normal Ground Level, The Earth Electrode Surrounded By Adequate Quantity Of Charcoal Dust And Salt To A Packed Thickness Of 15Cm On All Side And Including Connected Toand Includinggi Strip Of Size 32X6mmupto 7.5 Mtrs Long By Means Ofnuts And Bolts, Check Nuts And Washers Of Gi And Connected To Earhing Test Point And Earth Dollyall As Shown In Electrical Plate No 3 Of Mes Ssr Part I And Testing On Completion Includingnecessary Excavation And Earth Work In Any Type Of Soil, Pcc ( 1:3:6 ) Type C1 Chamber, Pre-Cast Rcc Slab 50Mm Thic In Cement Concrete ( 1:2:4 ) , Type B1, Reinforced With Welded Steel Wire Fabric Or Xpm, ( Weight Not Less Than 4 Kg Per Sqm ) With Cast Iron Frame, Funnel With Watering Pipe 20Mm Dia Medium Grade, Wire Mesh And Lugs, Gi Protection Pipe, 15Mm Dia, Light Grade, 7.5 Mtr Long For Protection Of Earth Lead Upto Test Point Etc All As Specified And As Directed. 18 S&F In Replacement Of Pvc Sintex Pole Mounted Junction Box 250X250mm, Having 04 Nos Of Aluminium Bus Bar Mounted On Insulator With The Help Of Nut, Bolts, Clamps Including Single Pole Mcb Of 6 Amps, 2.5 Sqmm Copper Conductors Cable 3 Corefor Connection Of Incoming And Outgoing Cables Complete All As Specified And Directed By Engineer-In Charge 19 S&F In Replacement Of Sheet Metal ( Ms ) Bus Bar Box Single Door, Outdoor Type Weather Proof, Size 300X300x200mm Mounted On Ground With Iron Angles ( 25X25x4mm ) . Having Alluminium Bus Bar 4 Nos, Rated 100Amp All As Specified & Directed By Eng-In-Charge. 20 M&L For Highly Efficient Integral Type Led Flood Light 200 Wattenergy Saving & Environment Friendly Made Of Pressure Die Cast Aluminium With Lens & Enclouser With Toughened Glass With Ip-66 Of Protection Class, With High Power Leds As Light Source Having Luminous Efficiency Should Not Be Less 90 Lumen With Active Power Factor Correction ( Apfc ) Electronic Gear ( Heat Shrink For Better Heat Transmission ) .It Shall Have Epoxy Powder Coated Grey Finish Phosphochromate Treatment And Operating Voltage Range Should Be Fron 120 Volt To 270 Volt Ac And Frequency Range 50Hz And Suitable For An Ambient Temparature From -40°C To 50 °Cand Humidity Level 10% To 90% Including Connection With Pvc Unsheathed Wirecopper Conductor 3 X 4.0 Sqmm Fitted On High Mast Pole Includingconnection And Taking Down Of Old Unserviceable Light Fitting Complete All As Specified And Directed Engr-In-Charge. 21 M&L For Preventive Maintenance Of Existing Eot Crane At Height Of 20 To 22 Metre ( Approx ) From Representative Of Firm As Approved By Ge Including- ( I ) Dismantling Of Hoisting Gear Box, ( Ii ) Drain Of Old Oil, ( Iii ) Cleaning & Greasing Of Gear Box Long Travel And Cross Travel And Refilling Of Fresh Oil ( Iv ) Fill Up Fresh Oil In Gear Box ( V ) Checking Of Hoisting, Long Travel, Cross Travel, Brake Unit , Oiling Of Brake Unit Pins. Greasing Of Long Travel Cross Travel Wheel Bearing, Checking Of Panel Board And Connections , Checking Of Rail Alignment, Checking Of Cross Travel Alignment.Checking And Oiling Greasing Of Wire Rope, Rope Drum, Pedstal Bearings, Load Test Using Dead Weight And Any Minor Defects All Connections Electrical / Mechanical Components, Including Any Minor Repair Deemed To Be Included In The Above Quoted Rate Complete All As Specified And Directed By Eng- In-Charge.Note:- ( I ) All Work Shall Be Executed In Presence Of Contractor, He Will Be Solely Responsible For Safety Of Working Personels At Site. ( Ii ) Contractor Shall Provide Necessary T&P, Safety Equipmentsoil, Grease, Gear Box Oil, Cloth Waste And Minor Spare Required And Any Other Material Required For Executionwill Be Deemed To Be In Quoted Unit Rate. ( Iii ) Approval Of The Firm Shall Be Taken From Ge Before Works Commencement. 22 M&L For Maintenance Of Existing Traffic Control Barrier, Including:- Winding Of 0.5 Hp Electric Motor, Wiring Of Control Panel, Replacement Of Control Switches, Repairing & Greasing Of Mechanical Unit & Gear Box Mechanism, Painting Work & Fabrication Work Required. Including ( I ) 6 Sqmm Xlpe Cable100 Rm For Electric Supply ( Ii ) 2.5 Sqmm 3 Core Copper Cunductor100rm ( Ii ) Excavation Work For Both Supply Cable And Signal Cable Etc.Complete All As Specified And Directed By Engg- In-Charge. Note:-This Job Included All Electrical And Mechanical Items Require To Make The Road Barrier In Serviceable Condition. 23 S&Fpvc Insulated Multi Stranded Copper Conductor Cable 6 Sqmm 4 Core, Round Flexible For Connection With Circuit Including Taking Down Unserviceable Cable Of Any Description, Complete All As Specified And As Directed. 24 S&F Pvc Insulated Multi Stranded Copper Conductor Cable 4 Sqmm 3 Core, Round Flexible For Connection With Circuit Including Taking Down Unserviceable Cable Of Any Description, Complete All As Specified And As Directed. 25 Material And Labour For Contactor Ofcoil Voltage 110 Volt Model Mnx 25 Including Taking Down Unserviceable Contactorof Any Description, Complete All As Specified Anddirected By Engineer In Charge. Make L&T / Havells / C&S 26 Material And Labour For Single Phase Preventor Including Taking Down Unserviceable Preventorof Any Description, Complete All As Specified Anddirected By Engineer In Charge. 27 Material And Labour For Suitable Rocker Holder Of Eot Crane 2 Tonincluding Taking Down Unserviceable Rocket Holderof Any Description, Complete All As Specified Anddirected By Engineer In Charge. . 28 Material And Labour For Iec Style Control Relay , 24 Vdc, 10A And 18 Pins Including Taking Down Unserviceable Iec Style Control Relayof Any Description, Complete All As Specified Anddirected By Engineer In Charge. . 29 M&L In Replacementvfd For 2 Ton Eot Crane 1.5 Kw, 2 Hp Including Connection And Testing Complete All As Specified And Directed By Eng- In-Charge. Make Delta / Schneider Or Equivalentnote:- ( I ) All Work Shall Be Executed In Presence Of Contractor, He Will Be Solely Responsible For Safety Of Working Personels At Site. ( Ii ) Contractor Shall Provide Necessary Oil, Grease, Gear Box Oil, Cloth Waste And Minor Spare Required Willdeemed To Be In Quoted Rate. ( Iii ) The Contractor Shall Replace The Vfd In Control Panel Which Is 20-22 Mtr Height From Ground 30 M&L In Replacementvfd For 2 Ton Eot Crane 2.2 Kw, 3 Hp Including Connection And Testing Complete All As Specified And Directed By Eng- In-Charge. Make Delta / Schneider Or Equivalentnote:- ( I ) All Work Shall Be Executed In Presence Of Contractor, He Will Be Solely Responsible For Safety Of Working Personels At Site. ( Ii ) Contractor Shall Provide Necessary Oil, Grease, Gear Box Oil, Cloth Waste And Minor Spare Required Will Be Deemed To Be In Quoted Rate. ( Iii ) The Contractor Shall Replace The Vfd In Control Panel Which Is 20-22 Mtr Height From Ground 31 M&L In Replacement Ofvfd For 2 Ton Eot Crane5.5 Kw, 7.5Hp Including Connection And Testing Complete All As Specified And Directed By Eng- In-Charge. Make Delta / Schneider Note:- ( I ) All Work Shall Be Executed In Presence Of Contractor, He Will Be Solely Responsible For Safety Of Working Personels At Site. ( Ii ) Contractor Shall Provide Necessary Oil, Grease, Gear Box Oil, Cloth Waste And Minor Spare Required Will Be Deemed To Be In Quoted Rate. ( Iii ) The Contractor Shall Replace The Vfd In Control Panel Which Is 20-22 Mtr Height From Ground 32 M&L For Dismantaling And Taking Down Complete 25 / 35 / 50 Ltr Capacity Geysers From Site And Brought To E / M Store Yard & Refixing The Same After Carrying Out Following Works:- ( I ) Complete Cleaning And De-Scaling Of Inlet And Outlet Connections, Inner Tanks, Fittings, Fixtures & Outlet Pipelines Etc With Suitable Chemical Agent. ( Ii ) Complete Servicing And Maintenance. ( Iii ) Replacement Of Unserviceable Spares As Deemed Necessary Such As Inner Tank, Outer Cover, Inner Assembly, Glasswool, Rubber Gaskets, Nuts, Bolts, Clamps, Etc., Repair Of Minor Leakages If Any By Carrying Out Minor Welding / Brazing. ( Iv ) Complete Testing And To Ensure Proper Functioning & Maintaining Proper Water Temparature Complete All As Specified And Directed.Note:-The Cost For All Spares & Items Such As Heating Element Thermostat, Inner Assembly, Inner Tank, Outer Cover, Etc Shall Be Paid In Respective Items Separately. 33 M&L For Spray Painting To Existing Geysers Of Capacity 25 / 35 Ltrs With Two Coat Of Synthetic Enamel White Paint Over One Coat Red Oxide ( Primer ) Including Scratching Of Old Paint And Making Surface Smooth By Using Filler Etc Complete All As Specified And Directed By Engineer In Charge. 34 M&L For Spray Painting To Existing Geysers Of Capacity 50 Ltrs With Two Coat Of Synthetic Enamel White Paint Over One Coat Red Oxide ( Primer ) Including Scratching Of Old Paint And Making Surface Smooth By Using Filler Etc Complete All As Specified And Directed By Engineer In Charge. 35 S&F In Repair Pvc Connection Pipe 15Mm Size And 45 Cm In Length With Adopter Nuts Of Pvc , Complete All As Specified And As Directed. 36 S&F Geyser Element 2 Kw, Isi Mark ( As Approved ) Including Taking Down / Out Unserviceable One, Complete All As Specified And As Directed By Engineer In Charge. 37 S&F In Replacement Of Thermo Static Switch Of Geyserincluding Taking Down / Out Unserviceable One, Complete All As Specified And As Directed By Engineer In Charge. 38 S&F In Replacement Brass Safety Valve, Isi Marked For Geysers, Including Taking Down / Out Unserviceable One, Complete All As Specified And As Directed By Engineer In Charge. 39 Replacement Of Indicating Bulb Of Geyser Including Taking Down / Out Unserviceable One, Complete All As Specified And As Directed By Engineer In Charge. 40 S&F Pvc Insulated Multi Stranded Copper Conductor Cable 2.5 Sqmm 3 Core, Round Flexible For Connection To Geyser Including Taking Down Unserviceable Cable Of Any Description, Complete All As Specified And As Directed. 41 M&Lfor Grouting The One Set Of Bolts / Anchor / Fastners Of Suitable Size Including Nuts ( One Set Include Four Bolts And Four Nuts ) In Wall Including Taking Down & Refixing The Existing Geysers At Site Any Make & Size And Making Good The Disturbed Surface, Complete All As Specified And Directed. 42 S&F In Replacement Only Outer Body / Cover Suitable For 25 / 35 Ltr Cap Geyser Made Out Of Mild Steel Pre-Treated And Stove Enamelled Sheet Of 18 Swg Complete With Top And Bottom Cover, Rubber Gasket, Stead Screw For Fixing The Top And Bottom Cover To Outer Body Easing Including Two Coat Of White Synthetic Enameled Paint Over One Coat Of Red Oxide Primer, Complete All As Specified And Directed. 43 S&F In Replacement Only Outer Body / Cover Suitable For 50 Ltr Cap Geyser Made Out Of Mild Steel Pre-Treated And Stove Enamelled Sheet Of 18 Swg Complete With Top And Bottom Cover, Rubber Gasket, Stead Screw For Fixing The Top And Bottom Cover To Outer Body Easing Including Two Coat Of White Synthetic Enameled Paint Over One Coat Of Red Oxide Primer, Complete All As Specified And Directed. 44 S&F In Replacement Ofinner Tank Made Of Stainless Steel For Geysers Of Capacity 25 / 35 Ltr Complete All As Specified And Directed. 45 S&F In Replacement Ofinner Tank Made Of Stainless Steel For Geysers Of Capacity 50 Ltr Complete All As Specified And Directed. 46 S&F In Replacement Geyser Inner Assembly Complete As Per Existing Shape / Size As Per Existing For Geyser Of Capacity 25 / 35 / 50 Ltr Having Suitable Numbers Of Slots & Pipes Provisions Complete With Rubber Gasket & Bolts For Fixing Completeall As Specified And Directed. 47 S&F In Replacement Glass Wool Of Minimum Density48 Kg / M3 Of Approved Quality, And Quantity As Per Requirement For Geyser Of Any Capacity Complete All As Specified And Directed. 48 S&F In Replacement Bottom Inspection Cover In Two Pieces Made Of Minimum Size 20 Swg Gi Sheet Suitable For 25 / 50 Ltrs Capacity Geysers Of Any Make, Inclusive Of One Red Oxide Primer Coat, One Under Coat And One Finishing Coat Ofwhite Color Paint Complete On Outer Surface And Inner Surface, Complete All As Specified And Directed. 49 S&F In Replacement Top Cover Made Of Minimum 20 Swg Size Gi Sheet Suitable For 25 / 50 Ltrs Capacity Geysers Of Any Make, Inclusive Of One Red Oxide Primer Coat, One Under Coat And One Finishing Coat Ofwhite Color Spray Paint Complete On Outer Surface And Inner Surface, Complete All As Specified And Directed. 50 Labour Only For Attending Complaints, Carry Out Inspection, Identifying The Fault Of Geyser / Solar Water Heating System At Various Location And Making Geyser / Solar Water Heating System Serviceable After Testing, Complete All As Specified And Directed.Notes: - ( I ) Cost Of Minor Spares Such As Rubber Gaskets, Nuts, Bolts, Clamps, Flanges And Minor Welding / Brazing And Loose Connection Deemed To Be Included In The Quoted Rates. ( Ii ) Cost Of Major Spare Such As Heating Element, Thermostat, Hot Water Pipe, Mcb, Safety Valve, Indicating Bulbwill Be Measured And Paid Under Respective Items Of Schedule. ( Iii ) If Contractor Fail To Attend / Rectify Complaints Within 16 Hrs Of Complaint Time, Recovery At Rs @ 200 Per Day Will Be Done Form Workdone Amount. ( Iv ) Geyser Already Considered Under Item No 32 Here-In-Before Shall Not Be Considred Under This Item. 51 Supply, Laying & Testing Of Tubes ( In Repair ) , Medium Grade Galvanised, 15Mm Bore With All Fitting, Unions, Elbows Etc And Fixed Complete To Walls And Ceilings Or Laid In Floors Including Taking Out Unserviceable, Complete All As Specified And Directed. 52 S&F In Repair Angle Valve 15Mm Bore ( Dia ) , Cast Copper Alloy, Chromium Plated, Screwed Down, High Pressure, Screwed Both Ends For Iron Pipe With Wall Flange, Complete All As Specified And As Directed. 53 S&F In Repairs Bib Tap 15Mm Bore ( Dia ) , 2-In-1, Cast Copper Alloy, Chromium Plated, Suitable For Fixing Of Jet Including Flange Screwed Down, Complete All As Specified And As Directed. 54 M&L Submain Wiring With 2 Runs Of Copper Conductor Pvc Insulated Unsheathed Cable 1100 Volt Grade 4 Sqmm Drawn Through Pvc Conduit Medium Grade Isi Marked 25Mm Dia As Per Is Specification Fixed Concealedin Wall / Ceiling Including Conduit And Conduit Accessories And Incl Provn Of Pvc Insulated 2.5 Sqmm Multistranded Copper Conductor As Earth Continuity Conductor Connected To Earth Dolly All As Specified Including Dismantling Old And Making Good To The Disturbed Surface By Plastering And Two Coat Of Distamper All As Directed At Site.Note : Two Runs Of 4 Sqmm Cable Alongwith One Run Of 2.5 Sqmm Pvc Insulated Unsheathed Copper Conductor As Earth Wire, Conduitand Conduit Accessories Will Be Measured As One Length. 55 S&F In Repairs Metal Plug And Socket Including One No. Mcb 20A Complete All As Specified And Directed By Engr-In-Charge. 56 M&L For Dismantaling And Taking Down Complete Solar Water Heater System Of 300 Lpd Capacity Installed At Single / Double / Triple Storey Bldgs And Re-Fixing The Same After Carrying Out Following Works:- ( I ) Complete Cleaning And De-Scaling Of Inlet And Out Let Connections, Solar Collectors, Glasses, Hot Water Tank, Cold Water Tank, Make Up Tank, Fittings, Fixtures & Pipelines Etc With Suitable Chemical Agent. ( Ii ) Complete Servicing And Maintenance. ( Iii ) Replacement Of Unserviceable Spares As Deemed Necessary Such As Hot Water Tank, Flat Plate Collectors, Rubber Gaskets, Nuts, Bolts, Clamps, Flanges Etc., Repair Of Minor Leakages If Any By Carrying Out Minor Welding / Brazing. ( Iv ) Complete Testing And To Ensure Proper Functioning & Maintaining Minimum Water Temparature I.E. 60°C Complete All As Specified And Directed.Notes :- ( A ) Cost Of Minor Spares Such As Chemical Agents, Rubber Gaskets, Nuts, Bolts, Clamps, Flanges Etc And Minor Welding / Brazing Deemed To Be Included In The Quoted Rates. ( B ) The Cost Of Hot Water Tank, Flat Plate Collectors Shall Be Paid In Respective Items Separately. 57 M&L For Hot Water Tank In Replacement Of Capacity 300 Ltrs Without Heat Exchanger ( Non Pressurized ) Type, Cylindricalshape, Inner Tank Made Of Ss 304L With Inlet, Outlet & Overflow Arrangement & Valves, Duly Insulated With Glass Wool / Rockwool Not Less Than 100Mm Thick Layer & Outer Metallic Body And Including Suitable Electrical Backup ( Heating Elements & Thermostat ) , Sacrificial Anode, Temperature Guage & Make-Up Tank Etc. Complete All As Specified And Directed. The Electrical Back-Up System Should Be Thermostatically Controlled At 50°C For Hard Water And 55°C-60°C For Soft Water. 58 M&L For Hot Water Tank In Replacement Of Capacity 200 Ltrs Without Heat Exchanger ( Non Pressurized ) Type, Cylindricalshape, Inner Tank Made Of Ss 304L With Inlet, Outlet & Overflow Arrangement & Valves, Duly Insulated With Glass Wool / Rockwool Not Less Than 100Mm Thick Layer & Outer Metallic Body And Including Suitable Electrical Backup ( Heating Elements & Thermostat ) , Sacrificial Anode, Temperature Guage & Make-Up Tank Etc. Complete All As Specified And Directed. The Electrical Back-Up System Should Be Thermostatically Controlled At 50°C For Hard Water And 55°C-60°C For Soft Water. 59 M&L In Replacement For Flat Plate Collector Isi Marked In The Standard Size Of 1860Mmx1240mmx100mm ( Minimum Dimensions ) Complete In All Respects Having Fabricated Aluminium Sheet Outer Frame Casing & Back Plate And Toughened Radiation Glass Having Exellent Solar Transmittance, Heat Absorbing Unit Shall Be Consisting Of Copper Sheet Ultrasonic / Laser Welded To Specified Nos Of Copper Tubing Grid, With Selective Black Chrome Or Ultra Selective Sputtered Coating, Absorber Plate Must Be Encased In Not Less Than 50Mm Resin Bonded Insulation & Aluminum Foil For Barrier Against Out-Gassing Complete With End Plates, Collars And Fixing Arrangement With Washer / Rubber Seals / Hose Pipe Connection Etc. Complete All As Specified And Directed 60 Supply, Laying & Testing Of Tubes ( In Repair ) , Medium Grade Galvanised, 20Mm Bore With All Fitting, Unions, Elbows Etc And Fixed Complete To Walls And Ceilings Or Laid In Floors, Complete All As Specified & Directed By Engineer In Charge. 61 Supply, Laying & Testing Of Tubes ( In Repair ) , Medium Grade Galvanised, 25Mm Bore With All Fitting, Unions, Elbows Etc And Fixed Complete To Walls And Ceilings Or Laid In Floors, Complete All As Specified & Directed By Engineer In Charge. 62 Supply And Fixing ( In Repair ) Of Aluminium Cladding With Wire Mesh And Minimum 50Mm Thick Glasswool Of 48 Kg / M3 Density For Hot Water 15 / 20 / 25 Mm Gi Tubing Complete With Fittings And Fixing Materials Complete All As Specified & Directed By Engineer In Charge. 63 S&F In Replacement Toughned Radiation Glass Having Exellent Solar Transmittance ( Minimum 90% ) , Of Minimum 4 Mm Sizethick And Of Standard Size As Per Existing Arrangementof Solar Collector Complete All As Specified & Directed By Engineer In Charge. 64 S&F In Replacement Of Solar Water Heater Temperature Gauge / Thermostat As Per Existing Size Complete All As Specified & Directed By Engineer In Charge. 65 S&F In Replacement Heating Element 5 Kw 230V Ac, 50 Cycle, Triangular / Round Type Isi Marked Complete With Rubber Gasketfor Hot Water Tank Electrical Back Up System Complete All As Specified & Directed By Engineer In Charge. 66 S&F In Replacement Heating Element 2 / 3 Kw 230V Ac, 50 Cycle, Triangular / Round Type Isi Marked Complete With Rubber Gasketfor Hot Water Tank Electrical Back Up System Complete All As Specified & Directed By Engineer In Charge. 67 M&L Submain Wiring With 2 Runs Of Copper Conductor Pvc Insulated Unsheathed Cable 1100 Volt Grade 6 Sqmm Drawn Through Pvc Conduit Medium Grade Isi Marked25mm Dia As Per Is Specification Fixed Concealedin Wall / Ceiling Including Conduit And Conduit Accessories And Incl Provn Of Pvc Insulated 4 Sqmm Multistranded Copper Conductor As Earth Continuity Conductor Connected To Earth Dolly All As Specified Including Dismantling Old And Making Good To The Disturbed Surface By Plastering And Two Coat Of Distamper All As Directed At Site. Note : Two Runs Of 6 Sqmm Cable Alongwith One Run Of 4 Sqmm Pvc Insulated Unsheathedcopper Conductor As Earth Wire, Conduitand Conduit Accessories Will Be Measured As One Length. 68 S&F Vertical Mcb Db Tpn 4 Way Factory Made Ip 54 Protection Class Metal Double Door With 200 Amp Rating Bus Bar 240 / 430V Including Provision For Mounting Mccb Upto 125 Amps Rating Including Taking Out Unserviceable Complete All As Directed By Engr-In-Charge. 69 S&F Mcb Db Spn 8 Way Factory Made Ip 43 Protection Class Metal Double Door With 200 Amp Rating Bus Bar 240 / 430V For Fixing Of Mcbs / Isolators / Rccbs Etc Including Taking Out Unserviceablecomplete All As Specified And Directed. 70 S&F Mcb Db Spn 4 Way Factory Made Ip 43 Protection Class Metal Double Door With 200 Amp Rating Bus Bar 240 / 430V For Fixing Of Mcbs / Isolators / Rccbs Etc Including Taking Out Unserviceable, Complete All As Specified And Directed 71 S&F 3 Pole Mccb 100 Amps 50 Hz 415 V With Rupturing Capacity 16 Ka Etc Including Taking Out Unserviceable, Complete All As Specified And Directed 72 S&F 3 Pole Mccb 125 Amps 50 Hz 415 V With Rupturing Capacity 16 Ka Etc Including Taking Out Unserviceable, Complete All As Specified And Directed 73 S&F Mcbs 240 Volts 10 Ka Finger Proof Terminal, Bi-Connect Termination, Label Holder, 35 Mm² Terminal Capacity, Insulated Sliding Shutter, Large Two Position Dolly, Isi Markedto Be Fixed On Db For Following Item No 74 & 75Note : Db Shall Be Measured And Paid Separately Under Respective Items Of Sch A. 74 All As Per Item No 73 But For Mcb Spn 40 To 63 Amps. 75 All As Per Item No 73 But For Mcb Sp 5 To 32 Amps.
Contract Date: Feb 28, 2023 Contract Value : 7.59 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
31.
Communications and Information Technology  #1636276 AOC
Appointment Of Travel Agent Appointment Of Travel Agent .
Contract Date: Sep 24, 2020 Contract Value : 2.36 Crore
Boards / Undertakings / PSU No of Bidders 3
TenderDetail
Loading tenders