View Bid Results For Tobacco Products Tenders

We found 6 Bid Results related to tobacco products tenders. You can find Contractor details who won tobacco products tenders along with contract details in Bid awards announcements section.

Indian Tenders
2
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
7
Live Opportunities Worldwide
Filters
Stage
5
1
Tender Publishing Platform
4
2
State / UT
5
2
1
1
1
1
Contract Value
1
3
2
Publish Date
0
0
0
0
0
Sector
6
1
1
1
1
1
1
Ownership
3
3
2
1
Within keyword
Active filters:
Showing 1–1 of 6 tenders matching your filters
1.
Educational and Research Institute #9451601 AOC
Bids Are invited for Pharmacy Eqp. - Microscope , Pharmacy - Haemocytometer Widi Micropipettes , Pharmacy - Haemglobinometer , Pharmacy - Sphygmomanometer , Pharmacy - Stethoscope , Pharmacy - Human Permanent Slides For Various Tissues (Set Of 50 Slide) , Pharmacy - Model For Various Organs (Set Of 50 Slide) , Pharmacy - Specimen For Various Organs And Systems (Set Of 20) , Pharmacy - Human Skelton And Bones , Pharmacy - Different Contraceptive Devise And Model , Pharmacy - Ir Thermometer , Pharmacy - Refrigerator Single Above 210 Ltr , Pharmacy Safety - First Aid Equipment , Pharmacy - Pharmacotherapeutics Charts For Various Diseases Disorders (Set Of 10) Paper Laminated , Pharmacy - Surgical Devices And Sutures , Pharmacy - Digital Bp Instruments , Pharmacy - Digital Thermometer , Pharmacy - Esr Apparatus (Western Greeen And Wintrobe) , Pharmacy - Peak Flow Meter , Pharmacy - Stadiometer , Pharmacy - Digital Glucometer , Pharmacy - Adult Weighing Balance 150 Kg , Pharmacy - Drug Information Resources Charts (Paper Laminated) , Pharmacy - Various Types Of Ppe Kits , Pharmacy - Charts/Display/Avson Tobacco Control Glycemic Index Of Foods,Nutrition,Reproductive , Pharmacy - Menstural Hygine Products , Pharmacy - Display For Various Disinfecants,Mosquito,Repellents Etc. , Pharmacy - Permanent Slide Of Different Microbes (Set Of 50) , Pharmacy - Stop Watch , Pharmacy - Magnetic Stirers With Thermostat , Pharmacy - Wall Mounted Water Distillation Unit (Ss) , Pharmacy - Nesseler Cylinder , Pharmacy - Digital Melting Point Apparatus , Pharmacy - Thieles Tube , Pharmacy - Digital Calorimeter , Pharmacy - Hot Plates , Pharmacy - Digital Balance L0mg , Pharmacy - Microscope , Pharmacy - Electric Water Bath Unit , Pharmacy - Magnetic Stirred , Pharmacy - Stalagometer , Pharmacy - Desiccator 6 Inch , Pharmacy - Hot Plate , Pharmacy - Buchner Funnels( Medium) , Pharmacy Labor - Andreasens Pipette , Pharmacy - Ointment Slab , Pharmacy - Ointment Spatula , Pharmacy - Pestle And M
Contract Date: Ref. Documents Contract Value : ₹ 18.63 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 6
Uttarakhand View Result →
2.
Housing Urban and Rular Development #9179857 Technical Bid
Purchase Of Furniture Items For Eoc Building. Leh , Conference Table 12 Seater 3600 X 1500 X 740 Work Top--Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Soft Closing Dual Access Flap Provided For Access To Power Supply And Data Cables.Understructure-The Under-Structure Consists Of Mixture Of 25Mm And 18Mm Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Anodised Aluminium Alloy 63400 - Wp Profile Is Added At Bottom Edges For Improving The Aesthetics. The Product Has A Knock-Down Construction.Wire Management-A Wire Raiser Made Of 0.8Mm Crca Ms Is:513. It Is Epoxy Polyester Powder Coated ( Dft 40-60 Microns ) For Flow Of Wires And Cables. A Power Box With 2 Cutouts On Either Sides For Standard 8 Module Anchor Roma Is Provided. Beside Each Cutout, An Additional Cutout With Plate Is Provided For Mounting Audio Visual Cables ( Eg. Hdmi, Vga-A, Etc ) . The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Mingle10 Seater Mem Offiering With Tobacco Ash. ) ( Approved Brand Highquality ) , Officers Mesh Back Chair With Headrestseat / Back Assembly:The Cushioned Seat Assembly Consshould Be Ts Of Seat Outer ( Material-30% Glass Fiber Nylon ) & Upholstered Seat Inner ( Material- Poly Propylene ) With Moulded Polyurethane Foam & Polyster Fabric. The Netback Should Bemade Up Of Back Outer ( Material-Glass Fiber Filled Nylon ) & Back Inner ( Material- Pp ) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Full Back Size: 46.5 Cm. ( W ) X 60.0 Cm. ( H ) Seat Size : 51.0 Cm. ( W ) X 49.0 Cm. ( D ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45 + / - 2 Kg / M³ And Hardness Load 12 + / - 2 Kgffor 25% Compression. Back Spine: The Support Spine Should Bemade Up Of High Pressure Die Cast Polished Hed Aluminum. Armrests : The Armrest Should Behaving Two Adjustment, Height ( 6.0±0.5Cm ) And Depth ( 6.0±0.5Cm ) . Height Adjustment Should Beprovided In Aluminum Structure Of Armrest Which Should Beconnected To Aluminum Back Spine And Should Beoperated By Button. The Depth Adjustment Should Beprovided In Pad Which Should Befixed To Armrest Structure. Armrest Top Should Bemade Up Of Pu Molded Over Plastic Inner. Active Bio-Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features: • 360° Revolving Type • Front-Pivot For Tilt With Feet Resting On Ground & Continuous Lumber Support Ensuring More Comfort • Tilt Tension Adjustment Can Be Operated In Seating Position • 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair • Seat / Back Tilting Ratio Of 1:2 • The Mechanism Housing Should Bemade Up Of Hpdc Aluminum & Black Powder Coated ( Dft 40 To 60 Micron ) Seat Depth Adjustment: Seat Depth Adjustment Should Beintegrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Beof 3.75±0.1 Cmlumbar Support Assembly: The Lumbar Support Assembly Should Consistof Lumbar Spine ( Material-Glass Fiber Filled Nylon ) Which Should Befixed Toaluminum Back Spine. The Lumbar Pad ( Material- Poly Propylene ) Should Befixed To Lumbar Spine Through Lumbar Pad Support. Lumbar Support Assembly Has Height Adjustment Of 5.0±0.5Cmpneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0 ± 0.3Cm. Pedestal Assembly With Castors:The Pedestal Should Behigh Pressure Die Cast Polishedaluminum And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be65.0 ± 0.5Cm. Pitch-Center Dia. ( 75.0 ± 1.0Cm. With Castors. ) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter.The Neckrest Assembly Consshould Be Ts Of Upholstered Neckrest Inner ( Material-Polypropylene ) With Moulded Polyurethane Foam And Polyster Fabric.Upholstered Inner Should Befixed To Neckrest Cover.Neckrest Should Befixed To Back Assembly Through Neckrest Spine .Neckrest Assembly Has Height Adjustment Of 5.5 + / - 0.5Cm And Rotation Adjustment Of Overall 20° + / - 2°. Overall Dimensions Of Chair Seat Height - Min 45.5 To Max 55.5Cm.Height - Min 95.5 To Max 105.5 Cm. Width & Depth Of Chair As Measured From Pedestal - Width-75.0 Cm And Depth-75.0 Cm. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Acefull Back With Headrest ) ( Approved Brand Highquality ) , Officers Chairseat / Back Assembly:The Cushioned Seat Assembly Consshould Be Ts Of Seat Outer ( Material-30% Glass Fiber Nylon ) & Upholstered Seat Inner ( Material- Poly Propylene ) With Moulded Polyurethane Foam & Polyster Fabric. The Netback Should Bemade Up Of Back Outer ( Material-Glass Fiber Filled Nylon ) & Back Inner ( Material- Pp ) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Full Back Size: 46.5 Cm. ( W ) X 60.0 Cm. ( H ) Seat Size : 51.0 Cm. ( W ) X 49.0 Cm. ( D ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45 + / - 2 Kg / M³ And Hardness Load 12 + / - 2 Kgffor 25% Compression. Back Spine: The Support Spine Should Bemade Up Of High Pressure Die Cast Polished Hed Aluminum. Armrests : The Armrest Should Behaving Two Adjustment, Height ( 6.0±0.5Cm ) And Depth ( 6.0±0.5Cm ) . Height Adjustment Should Beprovided In Aluminum Structure Of Armrest Which Should Beconnected To Aluminum Back Spine And Should Beoperated By Button. The Depth Adjustment Should Beprovided In Pad Which Should Befixed To Armrest Structure. Armrest Top Should Bemade Up Of Pu Molded Over Plastic Inner. Active Bio-Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features: • 360° Revolving Type • Front-Pivot For Tilt With Feet Resting On Ground & Continuous Lumber Support Ensuring More Comfort • Tilt Tension Adjustment Can Be Operated In Seating Position • 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair • Seat / Back Tilting Ratio Of 1:2 • The Mechanism Housing Should Bemade Up Of Hpdc Aluminum & Black Powder Coated ( Dft 40 To 60 Micron ) Seat Depth Adjustment: Seat Depth Adjustment Should Beintegrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Beof 3.75±0.1 Cmlumbar Support Assembly: The Lumbar Support Assembly Should Consistof Lumbar Spine ( Material-Glass Fiber Filled Nylon ) Which Should Befixed Toaluminum Back Spine. The Lumbar Pad ( Material- Poly Propylene ) Should Befixed To Lumbar Spine Through Lumbar Pad Support. Lumbar Support Assembly Has Height Adjustment Of 5.0±0.5Cmpneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0 ± 0.3Cm. Pedestal Assembly With Castors:The Pedestal Should Behigh Pressure Die Cast Polishedaluminum And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be65.0 ± 0.5Cm. Pitch-Center Dia. ( 75.0 ± 1.0Cm. With Castors. ) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter. Overall Dimensions Of Chair Seat Height - Min 45.5 To Max 55.5Cm. Height - Min 95.5 To Max 105.5 Cm. Width & Depth Of Chair As Measured From Pedestal - Width-75.0 Cm And Depth-75.0 Cm. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Kareena High Back ) ( Approved Brand Highquality ) , Officers Visitor Chair 1. Seat / Back Assembly:The Cushioned Seat Assembly Consshould Be Ts Of Seat Outer ( Material-30% Glass Fiber Nylon ) & Upholstered Seat Inner ( Material- Poly Propylene ) With Moulded Polyurethane Foam & Polyster Fabric. The Netback Should Bemade Up Of Back Outer ( Material-Glass Fiber Filled Nylon ) & Back Inner ( Material- Pp ) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Full Back Size: 46.5 Cm. ( W ) X 60.0 Cm. ( H ) Seat Size : 51.0 Cm. ( W ) X 49.0 Cm. ( D ) 2. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45 + / - 2 Kg / M³ And Hardness Load 12 + / - 2 Kgffor 25% Compression. 3. Back Spine: The Support Spine Should Bemade Up Of High Pressure Die Cast Polished Hed Aluminum. 4. Lumbar Support Assembly: The Lumbar Support Assembly Should Consist Of Lumbar Spine ( Material-Glass Fiber Filled Nylon ) Which Should Befixed Toaluminum Back Spine. The Lumbar Pad ( Material- Poly Propylene ) Should Befixed To Lumbar Spine Through Lumbar Pad Support. Lumbar Support Assembly Has Height Adjustmentof 5.0±0.5Cm5. Tubular Frame ( 3012Ax ) : The Powder Coated ( Dft 40-60 Micron ) Tubular Frame Should Becantilever Type & Made Of Ø2.54±0.03 Cm X 0.2±0.016 Cm Thk Ms Erw Tube. Overall Dimensions Of Chair Seat Height - 48.5Cm. Height - 99.5Cm. Width-65.5 Cm And Depth-58.2 Cm. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Ace Visitor ) ( Approved Brand Highquality ) , Training Room Chairs1 ) Seat / Back: The Seat Sub-Assembly Should Bemade Up Of 1.2±0.1Cm Thk Plywood Upholstered With Moulded Foam And Polyester Fabric And Covered With An Injection-Moulded Polypropylene Outer Cover. The Seat Can Tip-Up When Not In Use And Thshould Befeature Can Be Used While Stacking The Chairs Horizontally The Back Sub-Assembly Should Bemade Up Of Injection-Moulded Polypropylene Inner Upholstered With Moulded Foam And Polyester Fabric And Covered With An Injection-Moulded Polypropylene Outer Cover. The Contoured Back With Width Extension At The Bottom Should Be A Should Bedesigned To Give Comfort To Lower Back. The Back Flexing Features Allows The Back To Tilt By 9C±2 To Aid The User In Adopting A Comfortable Reclining Posture. Both These Sub-Assemblies Should Befixed To The Tubular Structure, Back Size: 45.2Cm ( W ) X 44.6Cm ( I-I ) Seat Size: 47.0Cm ( W ) X 50.0Cm ( D ) 2 ) Tubular Frame Structure: The Powder-Coated 4 Leg Structure Should Bemade Of 2.2 ±0.03Cm Dia X 0.25 ±0.02Cm Thk M.S. E.R.W. Tube Front And Rear Leg Welded Along With Connecting Tube Made Of 1.9 ±-0.02Cm Dia X 0.2 ±0.016Cm Thk M.S. E.R.W. Tube To Form The Tubular Frame Assembly. The Legs Should Beprovided With Injection-Moulded Adopter Bush In Black Nylon And Brake-Loaded Castors Enabling Easy Maneuvering While Not In Use And Stable Sitting While In Use_ The Chairs Can Be Stacked Horizontally When Not In Use_ 3 ) Polyurethane Foam: The Polyurethane Foam Should Bemoulded With Density = 70.0 ±8.0 Kg / M3 And Hardness = 20 ±2 For Seat & 16 ±2 For Back At 25% Compression. 4 ) Armrests: The Armrest Structure Should Bemade Up Of 2.2 ±0.03Crn Dia X 0.25 ±0.02Cm Thk M.S. E R.W. Tube Welded To The Tubular Frame Structure And Having A Scratch-Resistant Tant Abs Arm Top. 5 ) Full Desklet: The Full Desklet Assembly Should Beflip-Up Type And Should Bemade Up Of Extension Tube Of 1.9 ±0.02Em Dia X 0_2 ±0.016Cm Thk Pas. E.R.W. Tube And A Support Tube On L.H. Side Of 1.6 ±0.02Cm Dia X 0.2 ±0.016Cm Thk M.S. E.R.W. Tube On Which An Scratch Resistant Tant Abs Desklet Top Should Befixed And Covered On Bottom Side With A Bottom Cover. 6 ) Brake-Loaded Castors : The Brake-Loaded Castors Should Beassembled To The Chair Legs, To Give A Free Movement For Maneuvering The Chair When Not In Use And It Will Brake The Movement When Load Should Beapplied ( While In Use ) To Give A Stable Feel. The Twin Wheel Castors Should Beinjection Molded In Black Polypropylene. Overall Dimensions Of Chair Seat Height - 47.5 Cm. Height - 89.0Cm. Width & Depth Of Chair As Measured From Base - Width-66.5Cm And Depth-84.0 Cm. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Approved Brand Highquality ) , Center Table 1 ) Side Table & Center Table Glass: It Is 10 ±0.3 Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Focing With Understructure. 2 ) Side & Center Table Understructure: It Is A Welded Assembly Made In Ss202 Grade Dia. 12±0.04 As Per Is:1762. Width Of Table= 112.0 Cm, Depth=60.0 Cm, Height=34.9 Cm. ( Pisa Center Table ) ( Approved Brand Highquality ) , Sofa 3 Seater1 ) Seat Foam : The Seat Is Made Up Of Pu Foam In Density 28 ±2 Kg / Cu.Mtr With An Additional Top Layer Of Supersoft Pu Foam In Density 32 ± 2 Kg / Cu, Upholstered With Fabric Or Leatherette. 2 ) Back Foam : The Back Is Made Up Of Pu Foam In Density 28 ± 2 Kg / Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg / Cu. Mtr, Upholstered With Fabric Or Leatherette. 3 ) Understructre : Understructure Is Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood [ Moisture Resistance & Termite Proof As Per Is:303 ] & Pinewood Of Cross Sections Devoid Of Major Knots & Surf Defects. 6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose. 4 ) Leg Assembly : It Is A Welded Assembly Made In Stainless Steel ( Grade Ss 202 ) Tube & Plate With Plastic Endcap. Width ( W ) : 206.0 Cm. Depth ( D ) : 90.5 Cm. Height ( H ) : 85.5 Cm. Seat Height ( Sh ) : 45.0 Cm. ( Pisa 3 Seater ) ( Approved Brand Highquality ) , Workstations - 1500 X 600Providing And Placingspine And Fin Based Modular Workstation, With Partition Thickness As 52.4 Mmthk And Ht -1200 Including Powder Coated Aluminium Trims. Fin:Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminateat Intermediate Level. Top Block Finished In Fabric Finish. Bottom Block Is Finished In Metal Finish. Tiles On Main Spine: Combination Of Top Tiles Are Fabric Tile. Bottom Tiles - Plain Metal. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Dl + Dl Finsh. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Worksurf - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500 Mm W X 600 Mm D. Pedestals- Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Cpu Trolley - With Castors. Kbpt Without Mousetray - Metal. Note: All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor To Take Care Of + / - 40 Mm Of Uneven Flooring. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Approved Brand Highquality ) , Staff High Back Chair1. Seat / Back Assembly: The Cushioned Seat Assembly Consists Of Seat Base Moulded In Glass-Filled Poly-Amide, Moulded Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. The Cushioned Back Assembly Consists Of Back Inner Moulded In Polypropylene In-Situ Moulded With Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. Back Size : 45.5 Cm. ( / 1 / ) X 53.0 Cm. ( H ) Seat Size : 48.5 Cm. ( W ) X 49.0 Cm. ( D ) 2. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Used In Seat And Backcushion Is Moulded In Density Min 48 Kg / M3, And Hardness Load 15 ± 2 Kgf As Per Is:7888 For 25% Compression. 3. Tilt Mechanism, Spines & Spine Connector: The Seat And Back Are Firmly Connected To The Base Frame And Are Cantilevered In Such A Way That It Gives A Multi-Dimensional Movement Possibility Just With A Simple Lean On The Sides Or Back, Without Need For Complex Manual Adjustments. The Cantilevered Seat Offers Impact Cushioning While Sitting And Synchronises With The Back Movement During Posture Changes. The S Shaped Spines Moulded In High Strength Glass-Filled Poly-Amide And The Spine Connector Moulded In Glass-Filled Poly-Amide Form The Back-Spine Structure Involved In Multi-Dimensional Recline Motion. The Variable Tilt Angle Recline Motion Can Be Adjusted With 3 Position Tilt Limit Featurewhich Should Be Inbuilt In Seat Base And The Tension ( Return Force ) Should Be User Weight Dependent. 4. Adjustable Armrests: The Assembly Consists Of Armrest Housing Sliding Over The Armrest Structure, Both Moulded In Glass-Filled Poly-Amide: The Height Adjustment Feature Should Be Button Operated Having Adjustment Of 6.6±0.5Cm. The Armrest Top Should Be Made Up Of Integral Skin Pu Moulded Over Plastic Inner Moulded In Glass-Filled Poly-Amide. 5, Pneumatic Height Adjustment: The Seating Height Can Be Adjusted With A Pneumatic Gas-Lift Having An Adjustment Stroke Of 9.2 ± 0.3 Cm 6. Pedestal Assembly: The Pedestal Should Be Injection Moulded In Glass-Filled Poly-Amide And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 66.0±0.5 Cm. Pitch Centre Diameter And 76.0±1.0 Cm. With Castors 7. Twin Wheel Castors :5 Nos. Twin Wheel Castos Are Injection Moulded In Poly-Amide Having 5.0 ± 0.1 Cm Wheel Diamter Assembled To The Pedestal. Overall Dimensions Of Chair Seat Height - Min 44.5 To Max 53.8 Cm. Height - Min 99.5 To Max 108.8 Cm. Width & Depth Of Chair As Measured From Pedestal - Width-76.0 Cm And Depth-76.0 Cm. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Approved Brand Highquality ) , Penta Workstations - 1500 X 1500 X 600 Providing And Placingpanel & Tile Based Modular Workstation, With Partition . Thickness As 52.4 Mmthk And Ht -1200 Including Powder Coated Aluminium Trims. Fin:Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminateat Intermediate Level. Top Block Finished In Fabric Finish. Bottom Block Is Finished In Metal Finish. Tiles On Main Spine: Combination Of Top Tiles Are Fabric & Fabric Magnetic Tile. Bottom Tiles - Plain Metal. Split Tiles On Main Spine: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Split Fabric Tackable Along With Split Fabric White Board.Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Dl + Dl Finsh. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Worksurf - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500 Mm W1 X 1500 Mm W2 X 600 Mm D. Pedestals- Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File.Cpu Trolley - With Castors. Kbpt Without Mousetray - Metal The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Penta 1500Mm*1500Mm ) ( Approved Brand Highquality ) , Officers Table 2100X2250x7502100x2250x750 Primary Work Surf Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Soft Closing Access Flap With In-Build Power Box Are Provided On Work Surf For Wire Management Secondary Work Surf Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Approved Brand Highquality ) , 1800X500x750 Top Panel-Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Slide Door Unit-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping For Body Panels Like Side, Bottom, Back And Shelves. Shutters Are Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Shutters Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening.Storage Is Provided With Lock For Security. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Approved Brand Highquality ) , Leather High Back Chairseat / Back Assembly : The Cushioned Seat Should Bemade Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Beupholstered With Pure Leather And Moulded High Resilience ( Hr ) Polyurethane Foam Of Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgffor 25% Compression.The Cushioned Back Should Bemade Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Pure Leather. Seat Size : 47.6 Cm. ( W ) X 49.2 Cm. ( D ) Back Size : 47.5 Cm. ( W ) X 77 Cm. ( D ) Armrests: The Armrest Top Should Bemoulded From Polyurethane ( Pu ) , Upholstered In Pure Leather And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps. Active Bio-Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features: • 360° Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat / Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Bemade Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment: Seat Depth Adjustment Should Beintegrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Beof 6.0±0.5 Cm. Adjustable Back Support: Back Frame Should Beconnected To The Up / Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. Pneumatic Ht. Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. Pedestal Assembly The Pedestal Should Behigh Pressure Die Cast Polishedaluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be65.0 ± 0.5Cm. Pitch-Center Dia. ( 75.0 ± 1.0Cm. With Castors. ) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Mouldedin Black Polypropylene. Overall Dimensions Of Chair Seat Height -44.5 To 54.5 Cm. Height -114.0-131.5 Cm. Width & Depth Of Chair As Measured From Base - Width-76.1 Cm And Depth-76.1 Cm. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( La Sedehigh Back ) ( Approved Brand Highquality ) , Leather Visitor Chair1 ) Seat / Back Assembly : The Cushioned Seat Should Bemade Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Beupholstered With Pure Leather And Moulded High Resilience ( Hr ) Polyurethane Foam Of Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgffor 25% Compression.The Cushioned Back Should Bemade Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Pure Leather. Seat Size : 47.6 Cm. ( W ) X 49.2 Cm. ( D ) Back Size : 46.5 Cm. ( W ) X 59.5 Cm. ( D ) 3 ) Visitor Tubular Frame: The Tubular Frame Should Becantilever Type And Made Of Ø2.54± 0.03 Cm X 0.02 ± 0.016Cm Thick Ss 202 Tube. The Back Should Beconnected To Frame Through Chrome Plated High Pressure Die Case Connector Piece. Overall Dimensions Of Chair Seat Height -46.2 Cm. Height -98.2 Cm. Width & Depth Of Chair As Measured From Base - Width-60.9 Cm And Depth-64.7 Cm. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Approved Brand Highquality ) , Sofa 2 Seater 1 ) Seat Foam : The Seat Is Made Up Of Pu Foam In Density 28 ±2 Kg / Cu.Mtr With An Additional Top Layer Of Supersoft Pu Foam In Density 32 ± 2 Kg / Cu, Upholstered With Fabric Or Leatherette. 2 ) Back Foam : The Back Is Made Up Of Pu Foam In Density 28 ± 2 Kg / Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg / Cu. Mtr, Upholstered With Fabric Or Leatherette. 3 ) Understructre : Understructure Is Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood [ Moisture Resistance & Termite Proof As Per Is:303 ] & Pinewood Of Cross Sections Devoid Of Major Knots & Surf Defects. 6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose. 4 ) Leg Assembly : It Is A Welded Assembly Made In Stainless Steel ( Grade Ss 202 ) Tube & Plate With Plastic Endcap. Width ( W ) : 146.0 Cm. Depth ( D ) : 90.5 Cm. Height ( H ) : 85.5 Cm. Seat Height ( Sh ) : 45.0 Cm. ( Approved Brand Highquality ) , Corner Table1 ) Side Table & Center Table Glass: It Is 10 ±0.3 Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Focing With Understructure. 2 ) Side & Center Table Understructure: It Is A Welded Assembly Made In Ss202 Grade Dia. 12±0.04 As Per Is:1762. Width Of Table= 60.0 Cm, Depth=60.0 Cm, Height=34.9 Cm. ( Approved Brand Highquality ) , Conference Table Square 1000 X 1000 X 740 Work Surf-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Soft Closing Access Flap Provided For Access To Power Supply And Audio Cables. Work Top Is Available In Two Shapes Square And Pebble ( Round ) Side Panel-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990 Matching To The Worktop, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Cutout With Gromet Provided For Routing Cables In Case Any Audio Visual Equipment Is To Be Fixed Later. Understructur-The Under-Structure Consists Of An Inner Tube Assembly With Top For Worktop Mounting And Base Plate With Levellers. The Top Plate Is Made Of 5Mm Thk Hot Rolled Steel Plates ( Hr ) ( As Per Is: 2062 ) & The Bottom Plate Is Made Of 8Mm Thk Hot Rolled Steel Plates ( Hr ) ( As Per Is:2062 ) . The Inner Tube Assembly Is Made Of 25.4Mmx 25.4Mm X 1.2Mm Thk Round Electric Resistant Welded Tube ( Erw ) ( As Per Is:7138 ) Welded Together Using Tungsten Inert Gas Welding. The Whole Structure Is Epoxy Polyester Powder Coated ( Dft 40-60 Microns ) . The Product Has A Knock-Down Construction. Cutout For Standard Anchor Roma 6 Module Is Provided For Electrical Fittings.An Additional Cutout With A Plate Is Provided For Mounting Audio Visual Cables ( Eg Hdmi, Vga-A, Etc. ) Removable Panel-The 3D Removable Panels Are Provided For Ease Of Servicibility. It Also Provides Easy Access To Internal Sp In Case Of Any Audio Visual Equipment Is To Be Added Later. It Is Made Of 1.2Mm Crca Ms Is:513 And Epoxy Polyester Powder Coated ( Dft 40-60 Microns ) . The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Approved Brand Highquality )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Ladakh View Result →
3.
Law and Justice #7946101 AOC
Tender For Hiring Of Services For Destruction Of Tobacco Tobacco Products
Contract Date: Sep 15, 2025 Contract Value : ₹ 22.14 Lakh
Government Departments No of Bidders 1
Gujarat View Result →
Ladakh View Result →
5.
Defence #4467653 AOC
Bids Are Invited For Custom Bid for Services - PREPARATORY OPERATIONS OF Edu - 1 SCOPE OF WORK: To carry out the following works at BDL premises. 1) Separation and Bunching of Wires. 2) Knotting of EDU-PCB to bundle cable. 3) Thermal Stripping of Wires. 4) Twisting of Wires. 5) Tinning of Wires. 6) Cut length to size. 7) Cleaning of soldering points. 8) Other related soldering work. Note: - All the input Materials will be provided by BDL. 2.1 COMMON TERMS and CONDITIONS: 2.1. Job requirement / Qualification: 2.1.1. All Operators should be semi - skilled / skilled/qualified/certified by authorized Agencies as per the nature of work. 2.1.2. Interchangeability of working personnel, with multi skilled personnel is permitted. 2.1.3. Intermediate / Stage inspection during the assembly operations is in the scope of the contractor with the qualified personnel as per the requirement. 2.1.4. Deputed personnel who are supposed to handle the activity with igniters/ explosives Will be trained by BDL and certified for the same. Such persons only will be allowed to carry out the activities for the specific job. 2.1.5. Safety instructions list contemplated and issued by the designed will be briefed to the deputed personnel - periodically. 2.2 QUALITY ASSURANCE: 2.2.1. One production and one quality - control BDL officer will monitor the production and quality activities 2.2.2. The quality of the assembly / service made will be qualified as per the quality plan prescribed in the process sheet/ established process or as per the Technological certificate parameters 2.3 LEGAL AND STATUTORY 2.3.1. The Contractor shall submit labour license under contract labour (Regulations and abolition) Act, 1970 and shall comply with the rules and regulations made there under, a subsequent changes. 2.3.2. Contractor shall pay the wages and other allowances to his employees in accordance with the existing laws i.e, MINIMUM WAGES ACT and leave wages in lieu of section 79 of Factories Act 1948 at the rate of S%(Based on minimum wages paid) etc. and the Statutory obligations amended from time to time. The contractor is responsible to submit such documents every month along with bill, without which bill shall not be processed for payment. 2.3.3. Labour License: The contractor shall obtain labour license from competent authority (Central Government) within thirty days of issue of acceptance and submit to the officer in Charge. The cost of obtaining license i.e., license fee etc. shall be borne by the Contractor. However Contractor shall not generally start work without obtaining valid labour license unless otherwise ordered by. The Contractor shall also submit an indemnity bond executed on stamp paper 100/- indemnifying BDL against all the statutory requirement of the labour department. 2.3.4. The CONTRACTOR shall get himself registered with the concerned authorities as provided under various applicable acts and shall be directly responsible to such authorities for compliance with the provisions thereof. 2.3.5. By way of illustrations of various Acts as stated from time to time, the following Acts as amended from time to time shall be complied by the CONTRACTOR. i) Employees Provident Fund Act, 1952. ii) Contract Labour (Regulations and Abolition) Act, 1970. iii) Minimum Wages Act, 1948. iV) Payment of Wages Act ,1936. V) Employee Compensation Act,1923. Vi) Factories Act.1948 Vii) Maternity Benefit Act, 1961. Viii) Employees State insurance Act, 1948. iX) Payment of bonus Act, 1965. 2.3.6. No Employer-Employee relationship exists between BDL and personnel deputed by the Contractors firm. He shall not have any right to claim any benefit/compensation/absorption/regularization of service with BDL, under any labour laws. . 2.3.7. The personnel, whose services are spared for BDL is employee of Contractors firm for intents and purposes. 2.3.8. No additional facility /benefit other than specified in contract will be extended to the Contractors firm for intents and purposes. 2.3.9. The Contractor has to pay wages/allowances with regard to hours of work ,rest interim spread over extra hours, weekly holidays etc. strictly adhering to the provisions of Factories Act 1948. The Contractor has to comply with ESl, PF rules and other statutory provisions, regulations. The Contractor should take insurance policy covering liability under Employees Compensation Act, 1923 who are not covered as per provisions of Employees State insurance Act, 1948. The Policy should be taken within 15 days from the date of signing of the Agreement and should be renewed regularly if required. 2.3.10. The management shall not be held responsible under any circumstances for any compensation arising out of any injury , accident or death of any persons deputed by the contractor . The contractor shall indemnify BDL from all the liabilities whatsoever under the Employee compensation Act 1923 , if any injury suffered by the workmen employed by the contractor resulting in death of his workmen. 2.3.11.The contractor shall maintain all statutory registers shall submit the return to concerned authority as per applicable and other records as may be required from time to time and make them available for inspection as and when demanded , failing which suitable action will be taken which may result in penalty or termination of the contract with out any notice . ln such circumstances of termination there will be no claim from the contractor. 2.3.12.|n case of any dispute arising between the Management and the contactor with regard to the implementation/ administration interpretation of any clauses in the terms and conditions of this agreement , the decision of the Unit Head of BDL, Bhanur unit shall be final. 2.3.13.The contractors establishment shall be subjected to inspection, investigations etc by BDL for ensuring proper and faithful compliance of the provisions under the Agreement by the CONTACTOR with regard to the implementation of labour laws and matter stated. 2.3.14. The CONTRACTOR shall take adequate precaution and to his best endeavors to prevent any riots or any unlawful behavior by or amongst his workmen and/or others employed by him for the preservations of peace and protection of the inhabitants and security of property at or in the neighborhood of site. 2.4 SAFETY: 2.4.1- Deputed Personnel shall wear the PPE like Goggles, Gloves, Aprons, Helmets, Anti-static foot-wears, Earthing wristbands etc. before commencement of the operation. 2.4.2. Contractor should provide Safety shoes, anti-static footwear, brushes; rubber gloves, Aprons, detergent etc to deputed personnel at regular intervals for handling day to day works efficiently. 2.4.3. While working in the site, Deputed personnel should follow all safety precautions and BDL security rules without causing any hindrances in the working area. The Contractor has to ensure all safety precautions and is responsible for any direct or indirect accidents to the Personnel. 2.5 SECURITY 2.5.1 Photo identity cards to be obtained from BDL-CISF for the persons attending the work under contract agreement. The Contractor shall provide police verification along with other documents of the persons engaged by him for security clearance and issue of entry/photo pass. 2.5.2 Usage 0f Mobile phones, photography and consumption of alcohol/ Tobacco products in the plant area is strictly prohibited. 2.6 PAYMENT AND COMMERCIAL TERMS. 2.6.1 Based up on QC clearance certification of officer incharge of concerned division, service entry has to be made in SAP /GR to be made against SO. 2.6.2 Payment will be made through GeM 2.6.3 Taxes if any are to be quoted separately indicating the nature of tax and rate of tax. 2.6.4 Additional payments if any as per the statutory requirement are to be quoted separately and proof of payment to be submitted for reimbursement. 2.6.5 All statutory taxes are payable by the contractor , will be treated as inclusive in the quoted price, if the same are not quoted separately. 2.6.6 Contractor as employer to the deputed personnel must pay applicable minimum wages as fixed by the appropriate Government from time to time. 2.6.7 Any increase in the minimum wages of labour by state/ central legislature during the period of contract shall be reimbursed on submission of the proof of payment. 2.7 GENERAL TERMS: 2.7.1 Government Owned, Company/firm (GOCO) facilitates are owned or leased by BDL, but managed by third party company/ firm. GOCO Company/ Firm operates the GOCO facility operates with in BDL-Owned facility. GOCO Company /Firm do not represent the BDL The GOCO is run by a Company/Firm that ultimately delivers to BDL the products and services in its scope of work. 2.7.2 Contractor shall have valid vendor code. 2.7.3 Contractor shall have GST Registration Number ( supporting document to be enclosed) if the contractor is not required to go for GST Registration number - declaration has to be submitted in this regard. 2.7.4 The working hours for the contractor personnel will be during the BDL working hours viz 08:00 Hrs to 16.45 Hrs on any working day except for Sunday / BDL Holidays. 2.7.5 ln case of urgency, the support is to be extended beyond working hours as well as on Sundays and Holidays - whenever required. 2.7.6 All consumables will be provided by BDL. 2.7.7 Day to day activities should be taken up as per the Shop in-charge instructions. 2.7.8 ln case of unsatisfactory performance of the Deputed Person, suitable replacement shall be arranged by Contractor immediately. 2.7.9 Deployed personnel should be able to understand the local language and should be able to work on instructions of Officer -incharge. 2.7.10 Transportation and accommodation to the deputed personnel is in the Vendors scope. 2.7.11 ln case of any damage or loss to the companys property due to negligence of his personnel, the Contractor there of shall make the loss good 2.7.12 The contractor is required to give identity card through out the contract period to his/her staff. 2.7.13 The contractor should note that this contract is nontransferable. 2.7.14 The premises of the company shall be used by the contractor only for the contract of the company and does not create or vest any right or status to the contractor of his personnel to use the premise for any other purpose. 2.7.15 The contractor and all their personnel shall abide Indian Official Secrets Act. in vague and shall provide information of awareness of the above in writing. 2.7.16 BDL reserves right to cancel the contract for non performance / unsatisfactory works. 2.7.17 Any other term not specifically mentioned as above shall be as per the Service Order/Contract. 3 DELIVERY: As and when required by BDL. 4 OPTION CLAUSE: The purchaser reserves the right to increase or decrease the quantity to be ordered up to 50 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the ordered quantity by up to 50% of contracted quantity during the currency of the contract at the contracted rates. Bidders are bound to accept the orders accordingly. 5 ELIGIBILITY CRITERIA: Bidder has to upload the eligibility certificate in GEM portal while participating in bid which is issued by BDL. This certificate shall be used for only this bid purpose. Other bidders who do not upload eligibility certificate will not be considered. Total Quantity :
Contract Date: Ref. Documents Contract Value : ₹ 6.23 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Telangana View Result →
Assam View Result →
TenderDetail
Loading tenders