View Bid Results For Textile Scraps Tenders

We found 8 Bid Results related to textile scraps tenders. You can find Contractor details who won textile scraps tenders along with contract details in Bid awards announcements section.

Indian Tenders
10
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
5
2
1
Tender Publishing Platform
8
State / UT
8
1
1
1
1
1
1
1
1
Contract Value
4
1
1
2
Publish Date
0
0
0
0
0
Sector
6
3
1
1
1
1
1
Ownership
4
4
2
1
1
Within keyword
Active filters:
Showing 1–1 of 8 tenders matching your filters
1.
Defence #10689791 Price Bid
Operation, Repair And Maintenance Of Fire Fighting Equipments For The Year-2022-23 ( Sh: Maintenance On Routine Basis ) - 1 Sub Head - I Pumps & Motorspreventive Maintenance Of The Fire As Per Pump List Attached. The Agency Will Undertake The Maintenance Work Of The Pumps Only Through The Oem Or Oem Authorized Dealer. 2 Site, Model, Make, Primer Mover & Qty Of Pumps 3 Old Magzine -Up150 / 45 ( Kbl ) - Engine Driven - 01 Nos Up150 / 45 ( Kbl ) - Motor Driven - 02 Nos Cphm40 / 26 ( Kbl ) - Motor Driven - 01 Nos 4 Niranjan Auditoriumdsm80 / 36 ( Kbl ) - Engine Driven -01 Nosdsm80 / 36 ( Kbl ) -Motor Driven - 02Nosdb32 / 26 ( Kbl ) -Motor Driven -01 Nosdb50 / 16 ( Kbl ) -Motor Driven -02 Nos 5 New Building Dsm100 / 36 ( Kbl ) - Engine Driven -01 Nosdsm125 / 40 ( Kbl ) -Motor Driven - 01Nosrkb40 / 12L5 ( Kbl ) -Motor Driven -01 Nos 6 Nagrani Bk Db50 / 16 ( Kbl ) -Motor Driven -02 Nos 7 Total ( Pumps ) - 15 Nos 8 Scope Of Work Covered Under The Preventive Maintenece 9 One Visit In Each Three Months Will Be Made By An Oem ( Kbl ) Service Person With Priorintimation. 10 Twobreakdown Visits Included Under Amc. 11 Complete Check-Up Of The Pump Sets As Per Kbl Standards. 12 Check Free Rotation Of Pumps. 13 Check Tightness Of Casing Bolts, Foundation Bolts, And Grease Ms Fasteners. 14 Oil Levels, Grease In Bearings, Condition Of Bearing To Be Checked And Replenished If Required ( Spare Shall Be Provided By Deptt ) 15 Vibration, Noise, Bearing Temperature, Voltage, Speed And Pressure To Be Measured And Recorded. 16 Alignment Of Pump Set To Be Checked And In Case If Required Rectification To Be Carried Out And Readings To Be Recorded. 17 Coupling Bushes, Pins, Rubber Parts To Be Checked And To Be Replaced If Required. ( Spare Shall Be Provided By Deptt ) 18 Mechanical Seal Condition To Be Checked And Suitable Recommendations To Be Made. 19 Service Report Will Be Generated Afterevery Visit Recording Data Anddetails Of Above Checks. 20 Training Will Be Provided To Site Operators To Obtain Optimum Output & Lifeof Equipment. 21 Overhaulingof The Following Pump Including Dismentaling, Machining , Oiling , Greasing , Assembling & Installation At Site Includingloading And Unloading, To And Fro Transportation Ofpump From Nsg Campus Manesar To The Workshop. The Work Will Be Done Through The Oem Or Oem-Authorized Dealer Of The Pumps, And The Repair Work Will Be Given A Three-Month Warranty By The Oem / Authorized Dealer. Model & Make. 22 Up150 / 45 Or Dsm80 / 36 Or Rkb40 / 12L5.Kbl Make 23 Cphm40 / 26.Kbl Make 24 Db32 / 26 Or Db50 / 16.Kbl Make 25 Dsm100 / 36 Or Dsm125 / 40.Kbl Make 26 Replacement Of The Following Spare Parts Of The Existing Kbl Pump Up150 / 45 Kirloskar Make Main Fire Pump Driven By Electric Motor 90Kw / 120Hp Capacitywith A New One If Found Defective, Including Testing, Complete As Required, Including Credit For Old Scrap Material Which Will Be Retained By The Contractor Etc., Complete As Required. Thework Of The Pumps Will Be Done Only Through The Oem Or Oem Authorized Dealer. 27 Mechanical Seal 28 Mechanical Seal Plate 29 Sleeve Moc-Bronze ( 17458Cq001012 ) 30 Set Of Gasket Moc- Non Asbestos 31 O- Ring Moc- Natural Rubber 32 Ball Bearing 2877 Moc-Ss ( X630900400000 ) 33 Wear Ring Moc-Bronze ( 1712021991012 ) 34 Rewinding Of ( From 12.5 Hp Up To 120 H.P. Three-Phase Capacity ) Electrical Motors Including All Necessary Material And Of The Same Characteristics As Original With Required Size Of Super Enameled Copper Wire And F Class Insulation Material Including Dismantling, Removing Of Burnt Wires, Cleaning Of Slots, Varnishing, Assembling, Greasing, Testing Etc. Complete As Required Including Credit For Old Scrap Material Which Will Be Retained By The Contractor Etc., Complete As Required. Thework Of Rewinding Of Motors Will Be Done Only Through The Oem Or Oem Authorized Dealer. 35 Sub Head - Iifire Alarm System Sitc / Replacement Of Addressable Manual Call Point Complete As Required Through Authorised Dealer Or Oem ( Compatible With Est3 Or Equivalent Addressable System ) Make- Edward / Apollo / Siemens / Notifier Or Equivalent 36 Sitc / Of Addressable Photo Thermal Detector Complete With Mounting Base Complete As Read-Through Authorised Dealer Or Oem ( Compatible With Est3 Or Equivalent Addressable System ) Make- Edward / Apollo / Siemens / Notifier Or Equivalent 37 Sitc Of Intelligent Addressable Programmable Sounder Complete As Required Through Authorised Dealer Or Oem ( Compatible With Est3 Or Equivlent Addressable System ) Make- Edward / Apollo / Siemens / Notifier Or Equivalent 38 Sitc Of Addressable Fire Control Module Complete As Requiredthrough Authorised Dealer Or Oem ( Compatible With Est3 Or Equivlent Addressable System ) Make- Edward / Apollo / Siemens / Notifier Or Equivqlent 39 Providing, Fixing, Testing & Commissioning Of 15Mm Dia Quartzoid Bulb Type Sprinkler Of Rating 68 Degree Centigrade With Required Accessories ( Pendant / Upright Sprinkler ) 40 Sitc Of Horn Cum Strobe Complete As Read-Through Authorised Dealer Or Oem . ( Compatible With Est3 Or Equivalent Addressable System ) Make- Edward / Apollo / Siemens / Notifier Or Equivalent 41 Sitc Of Wall Speaker 1.5 / 3 / 6 W Metal Box Ceiling / Wall Speaker Complete Etc. As Required Make - Honeywell / Bosch / Ahuja Or Equivalent 42 Dismantling , Cleaning & Re-Fixing Intelligence Detector , Hooter , Mcp & Riincluding Checking, Testing And Connection Etc. As Required. 43 Supply Installation Testing Commissioning Of Smps Device Compatible With Two Loop Firepanel Make Est3 Or Equivalent As Per Direction Of Engg In Charge . 44 Servicing , Commissioning And Reprogramming Of Existed Addressable Fire Alarm Panelcompatible With Est3 Etc. Complete As Required. 45 Sitc Of Protective Cover Locked With Plastic Tie / Metallic Wire Suitable For Addressable Manual Call Pointincluding Dismantling & Re-Fixing Mcp With Necessary Arrangements As Per Direction Of Engineer In Charge Make- Hensel Kg9001 / Honeywell Or Equivalent As Approved By Engg In Charge . 46 Sub Head Iii - Pipes & Assecories Supplying, Fixing, Testing & Commissioning Of Double Flanged Sluice Valve Of Rating Pn 1.6 With Non Rising Spindle, Bronze / Gun Metal Seat, Isi Marked Complete With Nuts, Bolts, Washers, Gaskets And Conforming To Is 780 Of Following Sizes As Required :300Mm 47 Dismantling And Reinstalling The Existing 150 Mm Non-Return Valve In Horizontal Alignment In The Fbc Pipeline, As Well As Providingadditional Quantity Of 150 Mm C Class Heavy Duty Ms Pipeconforming To Is 3589 / Is 1239, Including Welding, Fittings Such As Elbows, Flanges, Nuts, Bolts, Gaskets, Etc., Whichever Are Required To Complete The Work, Painting With Two Or More Coats Of Synthetic Enamel Paint On The Pipe Of The Required Shade, Testing And Commissioning, Etc., As Required. 48 Providing, Installation, Testing & Commissioning Of Water Curtain Nozzle 15 / 20 Mm Dia Nickel Chrome Plated Brass, Bspt, K-Factor As Per Design Consideration Complete As Required 49 Providing, Laying, Testing & Commissioning Of C Class Heavy Duty Ms Pipe Conforming To Is 3589 / Is 1239 Including Welding, Fittings Like Elbows, Tees, Flanges, Tapers, Nuts Bolts, Gaskets Etc. And Fixing The Pipe On The Wall / Ceiling Or On Pipe With Suitable Clamp / Support Frame And Painting With Two Or More Coats Of Synthetic Enamel Paint Of Required Shade Complete As Required : 80 Mm Dia 50 Supplying And Fixing Single Headed External Yard Hydrant Valve With 1 No. 63 Mm Diainstantaneous Fm Gunmetal / Stainless Steel Coupling And Cast Iron Wheel, Isi Marked, Conforming To Is 5290 ( Type A ) With Blank Gunmetal / Stainless Steel Cap And Chain As Required 51 Single Headed Gunmetal 52 Supplying, Fixing, Testing And Commissioning Of Butterflyvalve Of Pn 1.6 Rating With Bronze / Gunmetal Seat Duly Isi Marked Complete With Nuts, Bolts, Washers, Gaskets Conforming To Is 13095 Of Following Sizes As Required : 53 80Mm 54 100Mm 55 150Mm 56 Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 57 Supplying & Replacement Of Weather Proof Hose Cabinet Suitable For External Hydrant / Fbic Fabricated Out Of 2 Mm Thick Ms Sheet With 6 Mm Thick Glazed Glass Door In Front Having Locking Arrangement Having Provision For 02 Nos Rrl Hose Pipes & 01 Nos Nozzlemounted On Wall Or Raise Brick Platform & Duly Painted With Po Redexternally & White Internally With Synthetic Enamelled Paint , Sign Writingetc. Complete In All Respect As Required At Site& Having Min Dimension - 900Mm X 600Mm X 500Mm Deep . 58 Supplying And Fixing 63 Mm Dia, 15 M Long Rrl Hose Pipe With 63 Mm Dia Male And Female Couplings Duly Bound With Gi Wire, Rivets Etc. Conforming To Is 636 ( Type-A ) As Required : Gunmetal Make - Newage / Safex / Safegaurd / Essel / Lifegaurd 59 Providing & Fixing Of Pressure Switch In M.S. Pipe Line Including Connection Etc. As Required. Make Denfoss / Indfos / Sitzer 60 Providing & Fixing Flow Switch In Following Sizes M.S. Pipe Including Connection Etc. As Required. 150 Mm Diamakedenfoss / Indfos / Sitzer 61 Supplying And Fixing Undermentioned Item In Existingdrum & Bracket Arrangementcomplete Connection Etc. Asrequired 62 Water Hose Thermoplastic ( Textile Reinforced ) Type -2 As Per Is: 12585Size - 20 Mm Nominal Internal Dia X 30 Mtr Length Including Credit For Old Scrap Material Which Will Be Retained By The Contractor Etc., Complete As Required. 63 20 Mm Nominal Internal Dia Gun Metal Globe Valve With Nozzle On Existing Water Hose With Ss Clampincluding Credit For Existing Gun Metal Globe Valve & Nozzle Material Which Will Be Retained By The Contractor Etc., Complete As Required. 64 Hose Reel Drum With Brackets Conforming To Is 884 Ms Construction Spray Painted In Post Office Red Including Credit For Exisitng Reel Drumwhich Will Be Retained By The Contractor. Etc. Complete As Required. 65 Fabrication Supply Installation Testing Commissioning Mscabinet Made Of 1.2Mm Thick Ms Sheet With4 Mm Thick Transparent Acrylic Sheet Double-Leaf Door On The Front Including Necessary Locking Arrangement Including Mounting On Wall, Suitable To Accommodate Different Typefire Extinguisher Duly Painted With Post Office Red Externally And White Internally With Synthetic Enamel Paint Without Back Cover Including Dismantling & Refixing The Existing Fire Extinguisher Completely Required As Per Direction Of Engineer-In-Charge ( Min Depth 250Mm ) As Per Site Condition For A Fire Extinguisher As Required. 66 Providing & Fixing Msclamp Suitable For Existing Fire Extinguisher ( Dry Powder 06 Kg / Water Spray 09 Ltr / Co2 Type 4.5 Kg ) 67 Sub Head Iv - E &M Workearthing With G.I. Earth Pipe 4.5 Metre Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal / Coke And Salt As Required. 68 Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required. 69 Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing As Required. 70 Earthing With Copper Earth Plate 600 Mm X 600 Mm X 3 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal / Coke And Salt As Required. 71 Providing And Fixing 25 Mm X 5 Mm Copper Strip In 40 Mm Dia G.I. Pipe From Earth Electrode Including Connection With Brass Nut, Bolt, Spring, Washer Excavation And Re-Filling Etc. As Required 72 Providing And Fixing 25 Mm X 5 Mm Copper Strip On Surface Or In Recess For Connections Etc. As Required 73 Sitc Of Wall Fan 400 Mm Sweep Oscillating Type Having Aerodynamically Designed & Balanced Blade Complete With All Accessories Such As Front Cover, Mounting Accessories I / C Connection Etc. As Reqd.Havells Dzire 400 Or Equivalent In Crompton / Usha 74 Wiring For Submain Wiring Along With Earth Wire With Following Size Of Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recess Medium Class Pvc Conduit As Reqd 75 2X1.5 Sqmm + 1X1.5 Sqmm Earth Wire 76 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 3 Pin 5 / 6 A Modular Socket Outlet And 5 / 6 A Modular Switch, Connections Etc. As Required. 77 Providing And Fixing Following Switch Gears, Meters And Accessoriesin Existing Cubicle Panel / Starter Board Including Drilling Holes In Cubicle Panel, Making Connections, Etc. As Required Including Credit For Old Scrap Material Which Will Be Retained By The Contractor Etc., Complete As Required. 78 3Pole, 415V , Power Contactor Ac3 Rating 18 A 79 3Pole, 415V , Power Contactor Ac3 Rating 25A 80 3Pole, 415V , Power Contactor Ac3 Rating 32A 81 3Pole, 415V , Power Contactor Ac3 Rating 70A 82 3Pole, 415V , Power Contactor Ac3 Rating 110 A 83 Overload Thermal Relay Mn2 L&T 9-15A 84 Overload Thermal Relay Mn2 L&T 14-23A 85 Overload Thermal Relay Mn5 L&T 66-110A 86 Add On Block 2No+2Nc 87 Add On Block 1No+1Nc 88 Sub Head V - Fire Fightingequipmentssupply, Installation, Testing And Commissioning Of Ul Listed Abc Map-90% ( Mono Ammonium Phosphate ) Automatic Ceiling Mounted Fire Extinguisher For Oil Charged Transformer Rooms, Capacity 10 Kg, Applicable Fire Classes A, B & C, Ugts Pressure Gauge, Brass Forged Sprinkler Valves With Nozzle And Equipped With Pressure Gauge, External Coating Pure Polyester And Internal Epoxy Polyester Powder Coated, Heat Sensitive Glass Bulb Of 68°C. Make : Firemech / Ceasefire / Minimax / Kanex 89 Providing And Fixing Dry Powder ( Stored Pressure ) Type Portable Fire Extinguisher Of Following Capacity With Mono Ammonium Phosphate Powder 90 % Applicable To Fire Class A, B, C Controllable Discharge Mechanism With Epdm Hose And Nozzle, Ugts Pressure Gauge, Deep Drawm With Mig Welding Technology , External Pure Polyester & Internal Epoxy Polyester Powder Coated , Brass Forged Valves With Safety Pin Of Ss Material And Welding Procedure Approved By Tpi Rating As Per 15683 And Isi Mark With Suitable Fixing Bracket ( Ms ) Etc. As Reqd .Make -Ceasefire / Minimax / Kanex 90 6 Kg Powder Stored Pressure Type 91 Providing And Fixing Co2 Type ( High Pressure ) Type Portablefire Extinguisher Of Following Capacity With Co2 Gas Foo Fire Class B & C Electrical Discharge Controlmechanism Fitted With High Pressure Steel Braided Discharge Nozzle For Dispersed Discharge Of Co2 Enamel Spray Painting Powder Coated Handle , Hot Spinning Seamless Isi Marked Rating As Per Is 15683 With Suitable Fixing Bracket ( Ms ) Etc. Complete As Reqd Make - Ceasefire / Minimax / Kanex 92 4.5 Kg Co2 Portable Fire Extinguisher Type 93 Sub Headvi - Miscellaneous Worksitcdiesel Engine Manual Start ( Air Cooled ) Driven Make Kirloskar Taf1 / Greeves / Field Marshal ( With Std Manual Starting ) Or Equivalent Flexiblly Coupled With Self Priming Pump Kirloskar Sp3l Or Equivalent In Crompton / Wilo , Suction- 80Mm Delivery - 80Mm Mounted On Movable Trolley Fabricated Out Of C Channel Complete With Solid Wheel With Movable Handle Arrnagement & Side Open Canopy Of Ms Sheet. [ Warranty -01 Year ] 94 Supplying, Installation, Testing & Commissioning Of 600 Kva, 50 Hz, Servo Motor Operated Line Voltage Corrector, Copper Wound, Indoor, Continuous Duty, Three Phase, Suitable For 3 Phase Unbalanced / Balanced Input Voltage And Unbalanced / Balanced Load Conditions, Which Shall Comprise Three Nos. Fully Ic Controlled Sensing Circuits Microprocessor Based, With Built-In Filters To Improve The Output Wave To Be Pure Sinusoidal And Control Each Phase Individually. Conforming To Is 9815:1994 With Input Voltage 300-460V Output 415 ( As Set Output Voltage ) , + -1%, Naturally Oil Cooledwith First Filling Of Transformer Oiland Necessary Bypass Arrangements, Ms Tank Enclosure Mounted On Wheels, Withdigital Display Having Facilities To Show Fault Indication, Manual / Auto Indication, Manual / Auto Selection Switch, Output Voltage Increase / Decrease Switch, Input / Output Voltage Indication, Load Current Indication, Including Dismantling And Credit For The Existingkva Stabilizer With Transformer Oil. The Stabiliser Should Be Guaranteed For 12 Months From Commissioning For Any Manufacturing Defects. In The Event Of Any Failure Within The Above Period, Replacements Or Rectification Of Parts Shall Be Free Of Cost. The Quoted Rate Should Include Credit For Existing600 Kva Stabilizer With Transformer Oil Which Will Be Retained By The Contractor. ( Make-Vinitec Electronic Laboratory / Precision Control Instruments / Selvon Instruments Pvt. Ltd / Automatic Electric ( Ae ) ) / Purevolt ) 95 Sitc Oflead Acid Battery 150Ah, 12V Including The Dismantling Of Existing Battery, Including Credit For Existing Unserviceable Battery Of The Same Rating Which Will Be Retained By The Contractor Etc., Complete As Required. [ Warranty-36Month ] Make -Exide Xp1500 Or Equivalent In Amaron & Luminuous . 96 Sitc Of 7Ah, 12 V, Vrla Maintenance-Free Battery Including The Dismantling Of Existing Battery, Including Credit For Existing Unserviceable Battery Of The Same Rating Which Will Be Retained By The Contractor Etc., Complete As Required. [ Warranty-36Month ] Make -Exide12bv7b Or Equivalent In Amaron & Luminuous . 97 Supplying & Fixing Pvc Suction Hose Pipe Isi Marked Size 75 / 80Mm ( Make Texmo Code - A0695 Or Equivalent 98 Providing & Fixing Cast Ironfoot Valve Size 80 Mm To End Of Pvc Hose Suction Pipe Etc. Complete As Required ( Make - Kirloskar / Sant / Cri / Kartar )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Haryana View Result →
2.
Housing Urban and Rular Development #10598804 Price Bid
Upgradation Of Existing Fire Fighting Down Comer System And supply installation testing and commissioning Of Manual Operated Fire Alarm System At In Licensing Unit Building At Police Station Defence Colony , New Delhi , Sub Head-I- Upgradation Of Downcomer SystemSupplying , Installation , Testing And Commissioning Of Electric Driven Terrace Pump Suitable For Automatic Operation And Consisting Of Following , Complete In All Respects , As Required: ( Terrace Pump ) ( A ) Horizontal Type , Multistage , Centrifugal , Split Casing Pump Of Cast Iron Body & Bronze Impeller With Stainless Steel Shaft , Mechanical Confirming To Is : 1520 . ( B ) Suitable Hp Squirrel Cage Induction Motor Tefc Type Suitable For Operation On 415 Volts , 3 Phase , 50 Hz , Ac Supply With Ip55 Class Of Protection For Enclosure , Horizontal Foot Mounted Type With Class-F Insulation , Conforming To Is-325 . ( C ) M . S . Fabricated Common Base Plate , Coupling , Coupling Guard , Foundation Bolts Etc . As Required . ( D ) Suitable Cement Concrete Foundation Duly Plastered And With Anti Vibration Pads . ( E ) 450 Lpm At 35 M Head . , Providing & Fixing Of Pressure Switch In M . S . Pipe Line Including Connection Etc . As Required . , Providing Laying , Testing & Commissioning Of C Class Heavy Duty Ms Pipe Conforming To Is 1239/3589 I/C Fittings Like Elbows , Tees , Flanges , Tapers , Nuts Bolts , Gaskets Etc . In Ground Including Welding , Excavation & Providing Cement Concrete Blocks As Supports , Anticorrosive Treatment With Coaltar/Asphalt Tape As Per Is 10221 , Refilling The Trench Etc . Of Following Sizes Complete As Required . , 100 Mm Dia . , Providing , Laying , Testing & Commissioning Of C Class Heavy Duty Ms Pipe Conforming To Is 3589/Is 1239 Including Welding , Fittings Like Elbows , Tees , Flanges , Tapers , Nuts Bolts , Gaskets Etc . And Fixing The Pipe On The Wall/Ceiling With Suitable Clamp/Support Frame And Painting With Two Or More Coats Of Synthetic Enamel Paint Of Required Shade Complete As Required : , 100 Mm Dia , 25 Mm Dia , Supplying , Fixing , Testing And Commissioning Of Butterfly Valve Of Pn 1 . 6 Rating With Bronze/Gunmetal Seat Duly Isi Marked Complete With Nuts , Bolts , Washers , Gaskets Conforming To Is 13095 Of Following Sizes As Required : , 100 Mm Dia , Providing , Installation , Testing And Commissioning Of Non-Return Valve Of Following Sizes Confirming To Is: 5312 Complete With Rubber Gasket , Gi Bolts , Nuts , Washers Etc . As Required : , 100 Mm Dia , Supplying , Fixing , Testing & Commissioning Of Double Flanged Sluice Valve Of Rating Pn 1 . 6 With Non Rising Spindle , Bronze/Gun Metal Seat , Isi Marked Complete With Nuts , Bolts , Washers , Gaskets And Conforming To Is 780 Of Following Sizes As Required . , 100 Mm Dia , Providing & Fixing Of Pressure Switch In M . S . Pipe Line Including Connection Etc . As Required , Supplying And Fixing First-Aid Hose Reel With Ms Construction Spray Painted In Post Office Red , Conforming To Is 884 Complete With The Following As Required . 20 Mm Nominal Internal Dia Water Hose Thermoplastic ( Textile Reinforced ) Type -2 As Per Is: 12585 20 Mm Nominal Internal Dia Gun Metal Globe Valve & Nozzle . Drum And Brackets For Fixing The Equipmets On Wall . Connections From Riser With 25 Mm Dia Stop Gun Metal Valve & M . S . Pipe And Socket . , 30 Mtr . , Supplying And Fixing Of Fire Brigade Connection Of Cast Iron Body With Gun Metal Male Instantaneous Inlet Couplings Complete With Cap And Chain As Reqd . For Suitable Dia Ms Pipe Connection Conforming To Is 904 As Required : , 2 Way-100 Mm Dia M . S . Pipe , Supplying And Fixing 63 Mm Dia , 15 M Long Rrl Hose Pipe With 63 Mm Dia Male And Female Couplings Duly Bound With Gi Wire , Rivets Etc . Conforming To Is 636 ( Type-A ) As Required : , Stainless Steel ( Grade 304 ) , Supplying And Fixing Single Headed Internal Hydrant Valve With Instantaneous Stainless Steel Coupling Of 63 Mm Dia With Cast Iron Wheel Isi Marked Conforming To Is 5290 ( Type -A ) With Blankgunmetal/Stainless Steel Cap And Chain As Required : , Single Headed Stainless Steel , Fabrication Supply Installation Testing And Commissioning Of Hose Cabinet Of Size 750 Mmx600mmx250mm Made Of 1 . 6Mm Thick ( Double Door ) Ms Sheet With 6 Mm Thick Glass Doors Including Necessary Locking Arrangements ( 30 X 24 X 10 ) Suitable For 2 Nos . 15 Mtr . Hose And 1 No . Short Branch Pipe . Complete Etc . As Required . , Supplying & Fixing 63 Mm Dia Short Branch Pipe With 20 Mm Nominal Internal Diameter Size Nozzle Conforming To Is 903 Suitable For Instantaneous Connection To Interconnect Hose Pipe Coupling As Required : , Stainless Steel ( Grade 304 ) , Supplying And Fixing Air Vessel Made Of 250 Mm Dia , 8 Mm Thick Ms Sheet , 1200 Mm In Height With Air Release Valve On Top And Flanged Connection To Riser , Drain Arrangement With 25 Mm Dia Gun Metal Wheel Valve With Required Accessories , Pressure Gauge And Painting With Synthetic Enamel Paint Of Approved Shade As Required . , Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank , Is : 12701 Marked , With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet , Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank . , Circular Tank , Painting ( One Or More Coats ) On Rain Water , Soil , Waste And Vent Pipes And Fittings With Synthetic Enamel Paint Of Approved Brand And Manufacture And Required Colour On Old Work . , One Or More Coats On Old Work , Credit For Following Dismantle Items . , 100Mm Butterfly Valves , Hose Reel Drum , 2 Way Fire Brigade Connection , Double Door Hose Cabinet , Terrace Pump , Scrap Polyethylene 2000 Ltrs . Circular Water Tank . , Sub Head-Ii- Sitc Of Manual Fire Alarm SystemSupplying , Installation , Testing & Commissioning Of Main Control And Indicating Panel Made Out Of 16 Swg Ms Sheet To Accommodate The Following Items Duly Powder Coated In Approved Colour With Louvers For Ventilation , Locking Arrangement , Audio And Visual Indication For Fire Alarm And Public Address System , Monitoring System Including Connections , Interconnections Etc Complete As Required . 10 Zone Panel For Fire Alarm System 250 Watt Amplifier Racks Suitable For Operation On 230V Ac/24V Dc Supply Conforming To Iec-268-3 Complete With All Accessories As Required - 2 Nos . ( One To Act As Standby ) Talk Back Master Station With Led Ptt ( Press To Talk ) Push Button For Operation On 230V Ac/24 V Dc Supply Conforming To Iec-268 For Simplex Mode Of Operation/Communication Suitable For 20 Nos . Talk Back Unit -1 Set . Announcement Control Desk Suitable For Selection Of Different Zones Selectively And On All Call Switch With Visual Indication Etc . Complete As Required -1 Set . Amplifier Change Over Switch For Inter Changing Amplifier -1 No . Monitor Panel For Loudspeaker Complete With Output Selector , , On/Off Switch , Fuse , Visual Indications Etc . Complete As Required- 1 No . Gooseneck Microphone With Stand And On/Off Switch- 1 No . Main On/Off Switch , Fuse Indication Lamps , Dc And Ac Voltmeters & Ammeters , Terminal Blocks Etc . Complete As Required -1 Set . Battery Charger Trickle Cum Boost To Take Complete Load Of Fire Alarm & Pa System Complete With All Accessories Including Providing & Fixing Of 2 Nos . 12 Volt , 60 Ah Each Sealed Maintenance Free Batteries -1 Set . , Supplying , Installation , Testing & Commissioning Sector Panel Suitable For Following Zones , Complete With Visual Indications For Short Circuit Fault , Open Circuit Fault , Fire Condition And All Other Standard Facilities As Per Is:2189 With Mimic Diagram For All Area/Zone Covered , Complete With All Connections , Interconnections As Required . , 4 Zone , Supplying , Installation , Testing & Commissioning Of Smoke Detector With Built In Led And Mounting Base Complete With All Connect
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 6
Delhi View Result →
3.
Defence #10012409 AOC
Tender For Term Contract For Artificers Work In Zone I At Lansdowne. - Wooden Chowkhats Double Rebated Incl Hold Fast Rm 40/- 2 Wooden Chokhats Single Rebated Incl Hold Fast Rm 30/- 3 Pvc Gauged/Glazed Shutters Incl Iron Mongery. Sqm 125/- 4 Pvc Chowkhats Double Rebated Incl Hold Fast Rm 35/- 5 Pvc Chokhats Single Rebated Incl Hold Fast Rm 30/- 6 Pvc Door Shutter Only Panelled/Flush/Ledged Braced And Battened Incl Iron Mongery Sqm 130/- 7 Wooden Gauged/Glazed Shutters Incl Iron Mongery. Sqm 105/- 8 Old Wooden Shutters Of Any Description N.Exc 1.00 Sqm Each Leaf Including Iron Mongery Each 200/- 9 Old Wooden Shutter Of Any Description Exc 1.00 But N.Exc 2.00 Sqm Each Leaf Including Iron Mongery Each 250/- 10 Old Wooden Shutter Of Any Description Exc 2.00 Sqm Each Leaf Including Iron Mongery All Kind Of Ms Work Such As Window, Chowkhats, Ventilators, Guard Bars, Grills Pressed Steel Frames Ms Sruts, Reinforcement,/Chain Link Fencing/Barbed Wire. Kg 25/- 11 Brick Bats Obtained From Bricks/Brick Tiles Cum 500/- 12 Brass Ball Valve Of 15/20 Mm Dia Each 25/- 13 Stop Valve, Ball Valve, 15Mm Bore, Bib Tap Pillar Tap (Pvc) Each 18/- 14 Gi Tube 15Mm Bore Rm 25/- 15 Gi Tube 20Mm Bore Rm 30/- 16 Gi Tube 25Mm Bore Rm 40/- 17 Gi Tube 40Mm Bore Rm 50/- 18 Ac Sheet Of Any Size/Description Sqm 25/- 19 Cp Brass Shower Rose Each 30/- 20 Waste Coupling, Cp Brass 32/40Mm Each 10/- 21 Aluminium Sheets Sqm 30/- 22 Ci High Level Flushing Cistern Incl Fitting & Flush Pipe Each 100/- 23 Cp Pillar Tap, Stop Valve, Bib Tap, Angle Cock 15Mm Bore Each 30/- 24 Old Wooden Chowkhat With Shutter (Without Taking Of Shutter) N.Exc 1.50 Sqm Each With Iron Mongary Each 300/- 25 Old Wooden Chowkhat With Shutter (Without Taking Off Shutter) Exc 1.50 Sqm But N.Exc 4 Sqm Each With Iron Mongary Each 500/- 26 Point Wiring Point 25/- 27 Lamp Holder, Switch, Socket 5 Amp, Ceiling Rose. Each 2/- 28 Sketch Fitting Each 20/- 29 Switch, Socket 15 Amps Each 5/- 30 Sheet Metal Enclose 4 Way To 8 Way Each 30/- 31 Mcb Each 15/- 32 Ceiling Fan Regulator Each 15/- 33 Scrap Wood Cum 8000/- 34 Tube Light Fittings Each 50/- 35 Sub Main Wiring Rm 5/- 36 Pvc Old Float Valve Of Any Size Ad Description Each 15/- 37 Wall/Ceiling Board (Any Type) Sqm 12/- 38 Pvc Water Tank Not Exceeding 500 Ltr Capacity Each 300/- 39 Pvc Water Tank Exceeding 500 Ltrs But Not Exceeding 1000Ltrs Capacity 40 Stop Valve, 20Mm Bore, Bib Tap Cp Each 25/- 41 Ci Pipe, Ci Trap & Ci Fittings Kg 20/- 42 Kitchen Sink Steel Without Draining Board Each 250/- 43 Kitchen Sink Steel With Draining Board Each 300/- 44 Pvc Pipe 110Mm Bore / 75Mm Bore Rm 15/- 45 Steel Window / Door / Ventilator Without Grills Sqm 150/- 46 Pvc Connection Any Size Any Length Each 2/- 47 Hydraulic Door Closure Any Size / Any Pattern Each 50/- 48 Wooden Fillets Upto 13 Sqcm In Section Rm 5/- 49 Old Wire Cloth Any Size And Description Sqm 6/- 50 -Ditto- But Exceeding 13 Sqcm But Not Exceeding 40 Sqcm In Section Rm 12/- 51 Ac/Hard Board Of Any Description Including Cover Fillets Sqm 10.00 52 Pgi / Cgi Sheet Sqm 60.00 53 Ac Ridges Of Any Description And Size Rm 10.00 54 Plate Rack Wooden / Steel/Aluminum Of Any Size Type And Description Each 200.00 55 Old Stone/Stone Masonry Cum 400.00 56 Old Pvc Scrap Kg 8.00 57 Old Textile Covering (Pulp) Incl Fillet & Frame Sqm 1.00 58 Wooden Boarding Any Type And Thickness Sqm 25.00 59 Old Low Level Flushing Cistern Of Any Capacity Each 50.00 60 Old Mirror Cabinet Of Any Description Each 30.00 61 Old Looking Mirror Of Any Description Each 12.00 62 Old Drapery Rod/Plemet Box Of Any Description Rm 30.00 63 Old Aluminium Scrap Of Any Description Kg 150.00 64 Old Wood Scrap Of Any Description
Contract Date: Apr 17, 2026 Contract Value : ₹ 6.30 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Uttarakhand View Result →
4.
Educational and Research Institute #9111244 Technical Bid
Auction-Of-Scrap-Items Auction-Of-Scrap-Items , C½ , Scrap Items- Category ( A ) , Scrap Items- Category ( B ) , Scrap Items- Category ( C ) mputer With Accessories - 386 (20MHz) Non cach/2mb RAM/101keys keyboard / 1x1.2mb FEDH 1x360 kb FDD/1x80MB (F) HDD/ 2Serial and 1 Paralled Parts /387@20MHz/60 mb CTD/4”VGA card /MS DOS 4.01/ Tower Model 2. printer LQ1050epson (132 col. 264 (ps) 3. Floppy 48 TPI (box of 10) 4. floppy 96TPI (box of 10), 5. printer stand 6. Ups 1kva 01 1 Compaq pro 7500 Intel pentium 01 1 Hardening Shed 900 m square 2. UPS 1 KVA Sl. No. 10019840802 01 2 Compaq ij printer 01 3. Online UPS 1 KVA 01 3 Compaq s4100 scanner 01 4. Scanner HP 5590 01 4 Acc pac accounting 01 5. Inverter 2 KVA KTMC Sl. No. 098608 01 5 HP DJ 840C ij printer 01 6. Trolley for Inverter PVC 01 6 1 KVA “UPS supported Exide Battery” 01 7. Online UPS 1 KVA 01 7 HP LJ printer 1150 01 8. 42 AH Excide Power SMF Battery Model No. EP 42-12 02 8 UPS 2 KVA 60 min. backup Excide Battery 01 9. Stand Coated Projector SGP 601 01 9 Godrej Typewriter Hindi Machine No. 988322 01 10. Spare Halogen Bulb 01 10 Godrej Lock 7 liver 01 11. Overhead Projector Trolley 01 11 Harrison lock 04 12. Printer Dot Matric 01 12 Wood chair 06 13. COMAQ Presanio Pro 7500 intel Pentium (computer accessories) 01 13 Wood chair 08 14. Extension Board for computer 01 14 Office chair with plastic cane sheet 05 15. UPS 1 KVA APC Smart UPS model no. SU1000 UXINET M/F No. YSO/28211360 01 15 Wooden armed chair sheet with0 plastic 01 16. HP DJ 840C INK JET printer 01 16 Steel arm chair knitted 01 17. Samsung CD Writer 01 17 Table steel top 1500x900x760mm 01 18. Blank media CD 05 18 Wooden table 1220x750x760mm 01 19. Blank media (predictable CD) 05 19 Wooden Table 4‟x‟2‟x2.5‟ 01 20. Zenith Pentium with computer accessories 01 20 Steel Almirah 1525x 760x 460mm 02 21. Dotmatric Printer Sony make 01 21 Rack wooden 02 22. CVT 1 KVA 01 22 Symphony room cooler 01 23. Sound Card speaker with installation 01 23 Portable leaf area meter cable, conveyor image analyzer cable, 24 pin, 80 column Dot matrix printer manual 01 24. Zenith Pentium with computer accessories 01 24 Soil moisture monitor system 01 25. HP Inkjet Printer 01 25 Infrared thermameter 01 26. CVT 1 KVA 01 26 Tree measuring set and accessories I Tree measuring set and accessories II 1set 27. Photocopier Mx5216 01 27 Analytical balance elect. AA200DS 01 28. Lab Table 7‟x2.5‟x3‟ 02 28 Hero Honda CD 100 motor cycle UP42/6939 01 29. Single Pan Analytical Balance Model K-14 K-ray make 01 29 Single Pan Balance 01 30. Electric Oven 24”x24”x24” Aluminium chamber 01 30 Electric Oven size 24”x24”x24” 01 31. Ph Meter Griph 01 31 pH Meter Griph 01 32. Infrared Moisture Balance 01 32 Infra Red Monitor 01 33. Pocket Calculator 01 33 Pocket Calculator DCM 01 34. Analytical Balance K-ray 01 34 Analytical Balance 01 35. Locks 7 lever Harison make 02 35 SICCO Biochemical Digital Flame 01 36. Remington Standard Typewriter English 20”50.80 cm 01 36 Calcium Filter 01 37. Display Board size 6‟x4‟ 05 37 SICCO YORCO Distillation Unit 01 38. Pharsi Dari 12‟x12‟ 01 38 SICCO YORCOO Hot Plat 02 39. Notice Board Jalidar 4‟x3‟ 01 39 Energy Regulator 02 40. Automatic Slide Projector with Remote Control SUVIRA make 01 40 Steel Spatula 10 41. Pressure Tube 10 mt 10 mt 41 Tree pod stand 12 42. Godrej Coffer Stander 1 pc 42 Wire Guage 12 43. Telephone Lock 02 43 Test Tube stand 12 44. Lock Harison 01 44 Pippet Stand 01 45. Lock Small 01 45 Pestil 04 46. Lock Small 01 46 Bottle Brush 24 47. Lock 01 47 Sprit Lamp 03 48. Vernier Calipers 01 48 Secatier Passi 24 49. Hand Retatry Duster 01 49 Hedge Shear 02 50. Iron Table 3/4 inch +1 inch 01 50 Budding, Grafting Knife 24 51. Iron Stool 125 cm h 18x18 inch 01 51 Pruning Saw 04 52. Calliper digitel 01 52 Bill Hook edge 01 53. Digital moisture meter 01 53 Pruning Dey 02 54. Ravi multimeter 01 54 Loping Shear 02 55. Lab table 7x2.5x3‟ 02 55 Pruning Knife 02 56. Lab stool 2x1.5x1‟ 20 56 Grass Shear 01 57. Single pan analytical K-14 1 57 Sward Lawn 02 58. Perforated board 90x60cm 1 58 Ganesh Head Sprayer 01 59. Electric oven 24”x24”x24” 1 59 Ravi Altimeter 02 60. Ph meter griph 1 60 Ravi multimeter complete in leather case 02 61. Infrared moisture balance advance 1 61 Abneys levels in leather case 02 62. Pocket calculater DCM 1 62 Diameter tape 3meter 10 63. Analytecal balance K- Roy 1 63 Field lens 10xfoalding 02 64. Ravi altimeter complete in leather case 2 64 Bubble spirit level 01 65. Ravi multimeter complete in leather case 2 65 Altimeter Barometric 4500mtrs 01 66. Abneys levelsin leather case 2 66 Lux Meter Digital Range upto 200000 MSW562 02 67. Burette stand 06 67 Top Pan Direct Reading Balance Cap. 1 kg, 5 kg, Spring Balance 100 kg cap 03 68. Sico digital spectro photo meter 01 68 Automatic Slide Projector with Remote Control Model No. MP 410 01 69. Sico Hindustan double distillation appartus 01 69 Extra for Bulb in Timer 01 70. Sico biocamp flame photo meter 01 70 Spare 24 Volt 150 w hylogen lamp 01 71. Sico Yarco kgeldal digestion unit 01 71 Pressure Tube 10m 72. Steel spatula 10nos, tripod stand 12, wire gauge 12, test tube stand12, pipette stand 1, pestil mortar 10cm (4), bottle brush 24, sprit lamp 14 08 72 Plastic Container cap. 35 lit., 10 lit cap. 02 73. Godrej refrigerator 300 lit 01 73 Burette Stand 06 74. Voltage staplaizer 01 74 Office table 48x24x30 with 3 drawl 01 75. Analytical balance 01 75 Steel rack 72”x36‟”x15” 5 shutter 02 76. Soil hydrometer 4 76 VDU Table 36”x24”x20” 02 77. Chemical weight box 50gm physical weight box 200gms 1 77 Tubular chair with arm 04 78. Electrical extention board 3 78 VDU Table 36”x24”x20” 01 79. Stabilizer, vacuum distributor 3 79 Trolly 2 wheel 01 80. Digital PH meter with glass reference electrodes 1 80 Canopy imager Model CI-110 01 81. Lux meter 1 81 Godrej Chair PC 4003.PCH7022 650 mmx 650 mm x 820 mm 02 82. Top pan direct reading 1 82 Godrej Monitor PC3006, Table 750mm(H) x 728 mm (W) x 880 mm (D) 01 83. Lab table 5‟x3‟x3‟ 1 83 Godrej Table PC 3417 610 mm x 445 mm x 750 mm 02 84. Gestetner Rotary duplication model 320 1 84 Voltage Stabilizer 01 85. Getner” Photo micrography equipment 1 85 Soil Hydrometer 04 86. Extra charges above in plywood supplied with standard 1 86 SICCO Hindustan Distillation 01 87. Pocket calculator casio fx 82d 1 87 Digital Direct Reading Conductivity 01 88. Hot Air Oven Model No. YSI 431 Sl. No. 97C1822 1 89. Scientific Calculator CASSIO FX 82TL 1 90. Portable Digital Conductivity Meter 1 91. Spare Condenser for 10 lit. distillation 2 92. Spare Condenser for 5 lit. 1 93. Electric Lamp 3 94. Electric Top Loading Balance Cap. 300 g 1 95. Soil Tensiometer size 90 cm 01 96. Multi Chanel Soil Thermometer 01 97. Probe Length 10 cm, 30 cm, 50 cm, 100 cm 04 98. Deonizer Digital Double Bed 01 99. Analytical weight box 1 mg to 20 gm 01 100. Electric Extension Board 01 101. Portable Digital pH Meter Model No. KI 262(a) 01 102. Metallic Dial Scale Balance 10 kg cap 01 103. Spring Balance cap. 100 kg 01 104. Lab Sink 450x300x150 07 105. Lab Stool 2x1.5x1 fit 40pc 106. Vernier Calipers IME type 05 107. Screw Gage 25 mm 05 108. Water Bath Rectingular size 40x30x10 cm with 12 roles 7.5 cm 01 109. YARCO Instrument Lab Stirrer Mode No. YSI 507 01 110. Kjedal Digestion two distribution combined model 37-121-C 01 111. Glass Part-6 set 01 112. Stop Watch 01 113. SUVIRA Transcope Mode No. MP-340A 01 114. Outdoor use 60x90x3 02 115. Heat Convector apparatus Volt 230 w 02 116. Max. Min. Thermameter 02 117. Dicimal Balance for Direct Reading cap. 3000 gms Model No. AB-D12 01 118. Heating Element 02 119. Plier (Pilas) 01,01, 01,01 01 120. Screw Driver big 01 121. Screw Driver small 01 122. Tester 01 123. 3 Pin Tap 6A 01 124. Frot Dial Plastic Body Balance 5 kg cap. 01 125. Electric Extension Board 16 AMP 01 126. Electric Extension Board 10 x12” 01 set 127. Exhibit Panel 180x120cm 01 128. Heating Mantal cap. 2 lit 01 129. Timber Moisture Meter MSW 544 01 130. Microprocessor based water/Soil Analyser Kit 01 131. ORP Platinum Electrode 01 132. Double Beam UV-V15 Spectrophotometer model SL-160 01 133. Interior Illumination with 3NOS 01 134. Automatic Clyclic Timer 01 135. Multi Magnetic Stirres MAC with Hot Plate cap. 2 lit 01 136. Spectrophotometer Sn. No. 177 01 137. Optical Glass Cuvette 01 138. Tala 10lever 01 139. Heating Element 01 140. Table lamp 01 141. Heating element 02 142. Table Lamp 01 143. Extension Board 01 144. Fourt Dial Plastic Body Tap Pan Balance cap 5kg 01 145. Fourt Dial Plastic Body Tap Pan Balance cap 10kg 01 146. Ajanta Clock 04 147. Scientific Calculator 01 148. Remson Table Lamp with Tube 01 149. Scientific Calculator 01 150. Godrej Chair PC 4003.PCH7022 650 mmx 650 mm x 820 mm 01 151. Godrej Monitor PC3006, Table 750mm(H) x 728 mm (W) x 880 mm (D) 01 152. Godrej Table PC 3417 610 mm x 445 mm x 750 mm 01 153. Developer 1025/5216/5223 01 154. P/REC 1025/5216/5223 01 155. Heating Heater 01 156. Box size 46x28x28 inch 01 157. Revolving Chair 01 158. Table Top Fibre 01 159. Office Table 1200x760x760 mm 2nos 160. Steel Almirah 1980x860x480 mm 01 161. Book Case 1675x840 01 162. Agrosaw Seed Sampling Drier 01 163. Agrosaw Seed Germinator 02 164. Agrosaw Hot Air Oven 01 165. Indosaw Economic Electronic Balance 01 166. Indosaw Intelligent Digital Moisture Testing Machine 01 167. Printer for Above Moisture Testing Machine 01 168. Incubator Model YSI-437 YARCO make 01 169. Enamelled Tray 48pc 170. Scientific Calculator 01 171. Voltage Stabilizer YARCO make 01 172. Scientific Calculator 01 173. LT/LK make starter 01 174. Havells make main switch 01 175. Havells /LT Panel Board 01 176. Rem sem Table lamp 01 177. Scientific Calculator 01 178. Hot air oven YARCO model YSI-430 01 179. Lab Willey Grinder YARCO make model MSW-342 01 1.2. MES Agroforestry 1 Torch (Jeep) 01 - - - - - - 2 Torch with cell (Aveready) 01 3 Torch with 3 cell 01 4 Torch with 3 cell (Jeep) 01 5 Torch with 3 cell (Jeep) 01 6 Hazara 07 7 Hazara with Phuhara 15 8 Hazara with Phuhara 02 9 Kirlosker SV1 Sr.II, 8 HP/1800 RPM with accessories 01 set 10 Sign Board 5x3‟ 01 11 Sign Board 3x1‟ 03 12 Sign Board 6x3‟ 03 13 Sign Board 3x1‟ 04 14 Sign Board 5x3‟, 3x3‟ 01 15 Sign Board 5x3‟ 02 16 Spade TATA 10pc 17 Spade TATA Wooden Handle 25pc 18 Spade TATA 20pc 19 Spade TATA with handle 03pc 20 Spade TATA with handle 22pc 21 Big Khurpa 12pc 22 Khurpa 6pc 23 Khurpa 20pc 24 Khurpi 10pc 25 Tape 30 mt 01 26 Tape 15 mt. 01 27 Tape steel 1 mt 02 28 Tape plastic 30 mt 01 29 Tape steel 01 30 Screw gauge (2.6”) girth 3 sut 05 31 Bark guage 6 cm size 01 32 Spade TATA 50 33 Axes 02 34 Axes 03 35 Balti Suraj make 12” 02 36 Balti 11” 01 37 Balti Iron 10” 01 38 Maruti Foot Sprayer MRI -8/VM3BA 01 39 Garden Cart Singal wheel 01 40 Rich (5 piece) 01 set 41 Screw Rich 300 mm 1 pc 42 Pipe Rinch 1 pc 43 Lalten Champion 02 44 Drum Khali (205 lit. Cap.) 02 45 Container Plastic 35 lit cap and 10 lit cap 2 pc 46 Hasiya 5 pc 47 Kudal 03 pc 48 Lawn Mover 18” TRIMO 1 pc 49 Renti 6 inch 01 50 Renti 6 inch 01 51 Renti 01 52 Sabbal 7 kg 01 53 Torch with Cell 01 54 Torch 3 Cell 01 55 Torch 3 Cell 02 56 Iron Table 3/4 inch +1 inch 01 57 Iron Stool 125 cm h 18x18 inch 01 58 Tyre (118430) 04 59 Thresher Automatic 12 HP 18x30 double wheel hydraulic system with accessories 01 60 Rukhani 01 61 Flinch 4 x 4” 05 62 Nut bolt 5 sut 15 63 Rubber Sheet 4 x 4” 04 64 PVC pipe 4” 01 65 Reflex valve 100 x 100 01 66 Flinch 4” 04 67 Bolt 08 68 Bark gauge 6 cm 01 69 Ravi multimeter 01 70 Ravi altimeter complete in leather case 2 71 Ravi multimeter complete in leather case 2 72 Altimeter Barometric 4500mtrs 1 73 Measuring Tap metallic 15mt. 5 74 Soil thermometer 15cm 2 75 Mettlic tape 10m, 20m,30m 3 76 Secateur passi (4),hedge shear (1) budding Knife (4), bill hook (1), pruning Saw (4), Pruning Dey (2), loopping share (2), pruning knife (2), Grass shear (1), sword (2), Ganesh hand sprayer 11 77 Secateur passi 20 78 Sabbal 7kg 01 79 Khurpa big size 07 80 Khurpa small size 07 81 Tape plastic 01 82 Tape steel 01 83 Spade TATA with handle 03 84 Keel big size 08 85 Enameled Tray size 46x30 cm 38pc 86 3‟x2‟ size board sq fit 01 87 16 gage Chadar with hazara 40Nos 88 Sign Board 4x3 inch 01 89 Spade TATA 04 90 Kudal 01 91 Khurpi 05 92 Gainti 10 93 Metalic Tape 30 mt 02 94 3‟x2‟ size board sq fit 01 95 16 gage Chadar with hazara 43Nos 96 4‟x3‟x9‟ size board sq fit 01 97 Spade 04 98 Kudal 01 99 Khurpi 03 100 3‟x2‟ size board sq fit 01 101 16 gage Chadar with hazara 45Nos 102 Iron chhadar 55pc 103 4‟x3‟x9‟ size board sq fit 01 104 Hazara 10lt with fuhara 02 105 Fawda 04 106 Khurpi 05 107 3‟x2‟ size board sq fit 01 109 16 gage Chadar with hazara 30Nos 109 Bandar chhap balti 12” 04 110 10 Lt Hazara with Fuhara 02 111 Shakti power tillor 130 DI model 01 112 Hitesh Barket Assembly 01 113 Tail Wheel flat 01 114 Wheel Changer 01 115 Lugged Wheel 01 1.3. MES Horticulture Fruit Science 1 Sanyo PLCXU -40 (Sanyo LCD Multimedia projector) Model no. SANYO PLCXU -40 with short zoom lens serial no.G -3805494 2000 ANSILM XGA1024X768 resolution 01 1 Tula man balance Cap.0 -1kg model 40 AP ,MC no 7511043 01 - - - 2 BOD Incubator (automatic)TANCO make model PLT -141 size 610x450x410mm cap4 CUFF Alum Chamber 01 2 Tula man balance Cap.0 -1kg model 41SM ,MC no 7912089 01 3 Macro equipment Digital electric top loading balance cat no. 908 cap.100gm LC 0.005g 01 3 Weight box for chainometric 01 4 Seed Storage cabinet “MAC” 72”x30”x14” cat no. MSW 475 30 trays 01 4 Plant grinder (willy mill) 20mm 01 5 Handy cam video camera model 418E sony 01 5 Hot plate 0 -100 0C size -HP - 3 -SHC Sr.no. 54678 01 6 Servel voltage stabilizer 5KVA wider range automatic & auto cut 01 6 Microscope wes -was Optic model 20660 01 7 Exhibits panel board outdoor size 180x90 cm.codeno.RD -116 -03 02 7 Metallic stand for water distillation with cord and plug 01 8 Projection screen tripod model size 150x150cm code no.RD -207 -03 01 8 Pair of tongs 6” 01 9 Over head projector trolley code no.RD 201 -02 01 9 Wood microtome (incomplete) 01 10 Exhibits panel board outdoor size 180x90 cm.codeno.RD -116 -03 02 10 Hot air Oven electrical size 300x300x300mm AJE 01 11 Perforated board 150x90 cm RD -115 - 0 01 11 Water bath size 24”x12”x12” S 35 0 F Sr. no. 65 01 12 Media sterilization system MSW -101 01 12 Digital pH MAC model MSW 552 with pH range 0 -14 0.01 with automatic temperature controller 01 13 Voltage stabilizer automatic model MAC MSW 582 cap.1KVA 01 13 Digital conductivity MAC model MSW 555 range 0 -200 micro with dust cover and stand 01 14 Water still double walled cap.4 litre/hr. load 3.0KW MSW 197 01 14 Digital photo-electric calorimeter 8 filter model MAC MSW 557 wavelength 400- 680mm cavelles photocell detector with voltage stabilizer automatic model MAC MSW 500 cap.1KVA 01 15 Water still double walled cap.10litre/hr. load 5.0KW MSW 197d 01 15 Media sterilization system (auto clave) 01 16 Flame photometer without automatic ignition cat. No. CL361 Elico optional accesseories calcium fitter for above 01 16 Moisture box aluminium cap.250gm for soil 404 17 Seed germinator size 555x605x910mm cap 308lit. MAC(MSW 123)SS Automatic 0-24 hrs timer for regulating illumination cycle 01 18 Kjeldhal digestion unit micro processor based digital temperature indicator cum controller cat MSW437 01 19 Seed germinator(dual chamber) MAC microprocessor controlled with automatic stabilizer inside chamber size 555x605x910 mm SSMSW124b 01 20 BOD Incubator low temperature MAC microprocessor controlled with automatic stabilizer MSW 121C 505x415x830 mm 01 21 Plant growth chamber MAC micro-processor controlled with automatic stabilizer MSW 130 A size 570x875x555 mm 01 22 Auto clave vertical MAC size 305x550mm cap.50 lit. MSW 101(DX) 01 23 Seed storage cabinet sonar 27”x30”x14” cat no. SSC-10 AC 01 24 UPS 100VA PC smart UPS model SOA 1000Ux1 with rocket SMF battery for 30 min. backup time 01 25 26 Ah Exide power safe SMF battery model EP-26-12 03 26 Water purification unit (miliQ) BM9EN1105A 01 27 Microprocessor universal cooling camfuage cat no.CPR-30 A)Rotor head cat no.C-230 B) Voltage stabilizer VS-03 01 01 01 28 Aapurti and fixing iron sheet 18 gaze sixe 3.2 and 8 feet lamba angle iron sahit board 03 29 PC based automatic absorption spectrophotometer 01 double beam with compressor with three hollow cathode lamp to set RS232 interface background corrector with automatic gas box with auto flame alignment spectro analytical make SA1304 30 Regulator N2O 01 31 Regulator Acetylene 01 32 N2O burner 01 33 Backfire arrestor 01 34 PC PIU Branded 01 35 Printer compatible 01 36 Acetylene gas filled cylinder including cylinder cost 01 37 42 AH Exide power safe SMF battery model EP-42-12 03 38 Laminar Air Flow (Horizontal) with S.S. work RH58-07 size 120x60x60cm 01 39 HP Desktop computer 2000 series as per RC sl.no. 1NA912078 01 40 pH Meter systronic type-362 with glass electrode sr.no.009 1 set 41 Elico digital pH meter model L1-120 with electrodes sr.no.P7950 01 41 Elico soil Bridge type CM 84 with electrodes sr. C4151 01 42 Digital Spectrophotometer systronics type 106 sr no. 2640 01 43 Autoclave vertical size 250x450mm Y.ST.-402 sr no. 288 01 44 Analytical balance model KEROY sr.no. 5558 01 45 Chaino metric balance K-8A05620 (KEROY make) cap.9.210gm 01 46 Chaino metric balance (KEROY make) HC-21141 cap.9.10gm 01 47 Top Pan balance electrical type 75201 ELN no.13862212 01 48 Top Pan balance Avon make Cap.500gm sr.no. 542 01 49 Decimal triple beam balance reading 3000gm model ABD11 Avon make Cap.3.110kg 01 50 Digital conductivity meter model -304 Systronics sr.no. 407 01 51 Digital conductivity meter model -304 Systronics sr.no. 864 01 52 Plant grinder (willy mill) Chamber size 40x20mm with motor 0.25 HP Sr. no. 5877 01 53 Laboratory heating plate 30x45x15 cm 2KW Khera 01 54 Klettsumerson Photo electric calorimeter S.no.44154 with blue and green fitter 01 55 Digestion distillation assembly model K.J.121 AJE make 01 56 Rotatory microtome model1090 01 57 Universal Oven electrical memmerty type size 455x465x432mm model YSI 432 york 01 58 YARCO equipments Hot air Oven (memmert type) size 605 x605x605mm stainless steel cat no. YSI931 S.no.9701815 01 59 Plani meter 01 60 Hand refractometer 0-32% Erima Japan 15163 01 61 Hand refractometer 58-92% Erima Japan No.21 01 62 Hand refractometer 0-32% Erima Japan 02 63 Spirit lamp 01 64 Systronics Extraction unit for six test fitted with regulator sr.no. 3189 01 65 Sieve 20,40,60 mesh 02 66 Water distillation apparatus stand monesty type W.D. 50 01 67 Soil Thermometer 12” long 01 68 Soil Thermometer 18” long 01 69 Soil augar screw type 50mm 01 70 A.I.C. tensiometer 6” length 12” length 24” length Tube augar Soil Moisture metre Leather case Gypsum black with 1 meter lead wire 01 01 01 01 01 01 01 71 Screw Guage 25mm 01 72 Screw Guage 50mm 01 73 Vernier Calipers 05 74 Vernier calipers Super 01 75 Tele counter 01 76 Sambross Servo Controlled voltage stabilizer type SS 102 with over voltage under voltage cut out sr.no. 022 (2 KVA) 01 77 Servo Controlled voltage stabilizer cap.3 KVA 02 78 Water bath size 250x125x125mm YSI 413 01 minisizeYARCO 79 Centrifuge Model R-23 REMI sr.no. C06/300 01 80 Gas Generator for flame photometer (Khera) 01 81 Lux meter 50K LX-101 L-275182 01 82 Vaccum pump with 1.5 H.P.motor (Khera make) 01 83 Godrej Refrigerator cap.300lit. with stabilizer 0.5 KVA 01 84 Moisture box cap.250gm for soil sample 99 85 Rapid moisturemeter 0-50% with wet weight cat no. MB293 01 86 YARCO Shaking machine with covered body fixed speed fitted with timer model YSI516 01 87 YARCO Laboratory mill(villy type)0.5HP YSI 527 01 88 Bacteriological Incubator (TANCO) memmer type model PLT-136-INC-5 stainless steel size 600x600x600mm extra air circulation fan 01 89 Measuring tape 30mtr. 01 90 YARCO B.O.D. Incubator model YSI-440 size 565x865x550mm Optional accessories a. Voltage stabilizer 3.00KVA b. Interior illumination with 3 Nos. fluorescent tube 60m 01 01 01 91 TANCO B.O.D. Incubator (automatic TANCO make model PLT 141 Size 610x450x410mm cap.4 caftaluminium chamber 01 92 Seed storage cabinet „MAC‟ cabinet size 72”x30”x14” (approx.) cat no.MSW 475 30 trays 01 93 Macro equipment Digital electronic top loading balance Cat no.908 L.C. 0.005gm 01 94 Poly pouch sealing machine MAC model 24 pedastal model cat no. MSW-665 01 95 U.V. Radiation seed viewing cabinet MAC make app. Outer size 24”x24” cat no. 508 01 1.5. Veg. Science 1. Darati 05 1. Analytical balance Siughl Park-12 01 - - - 2. Sickle 10 2. Auto mix Remi Make 01 3. Banka 01 3. Analytical weight Box 01 4. Power Tiller 01 4. Automatic Pipette washer 01 5. Five time cultivator 01 5. BOD Ineubater 02 6. Trolley with Jeep tyre 01 6. Burette Stand with clamp 03 7. Logged Wheel 01 7. Bearranges Balance caps Kg. 01 8. Furrower 01 8. China matric balance K -8A Kamidas 01 9. Wheel Charger 01 9. Crossing Kit 05 10. Pully for haular 01 10. Digital Flame photometers 01 11. Mould board Plough 01 11. D.C.M Calculator + Desk Calculator 02 12. Hitech Bracket 01 12. Digital Conductivity meter 01 13. Flat Engine Pully 01 13. Heating mental cap2000ml+500ml 02 14. Seed bin 3 Qt 01 14. Dissecting microscope 06 15. Angle Iron 18 15. Elico Spectro photometer 01 16. Petromax 01 16. Epidias cope Getner Projector both 01 17. Lock 01 17. Electric boiler 01 18. Lock 01 18. Gange meter 02 19. Lock 01 19. Hot air oven 03 20. Lock 07 20. Hand Refractometer 02 21. Heat Convector 02 21. Hygrometer 01 22. Calculator 03 22. Hot Plate 02 23. Spade with Handle 20 23. SEW micro Kgeldal appratus 02 24. Measuring tape 02 24. Leonard &All win refrigerator 02 25. Steel Box 02 25. Laboratory vacuum Pump 01 26. Steel box 01 26. Micro Kjelhal D -apparatus 01 27. Steel box 02 27. Maximum Munimum thermameters 01 28. Steel Bokhari 5 Qt 02 28. Non Refrigerated Centrifuge 01 29. Steel Bokhari 3 Qt. 02 29. Oscar Binacular microscope 01 30. Steel Bokhari 2Qt. 01 30. Pocket calculator 02 31. Balance cast iron Wt. 10 kg 01 31. Physical weight box 01 32. Seed bin 2Qt 02 32. Salter spring balance 1 Kg.to 10 Kg 02 33. Plateform Balance with 100 to 10 kg weights 01 33. Sterio binocular microscope 01 34. Grass cutting Talwar 02 34. Sunmica Cap table 07 35. Gator Rockey Sprayer 01 35. Tri Pod Stand 06 36. Bearanger Balance cap 5 kg with weight 05 36. Tongue Stainless steel 01 37. Balance circular 02 37. Tripole Beam Balance 01 38. Maruti Foot Sprayer 03 38. Tensio meter 6,12 & 18 (4+4+4) 12 39. Maruti Foot Sprayer 01 39. Universal Moisture meter 01 40. Torch with 3cells 01 40. Voltage Stabilizer 01 41. Torch with cells 01 41. Wesiox microscope Lamp 01 42. Torch with cells 02 42. Water Steel 01 43. Steel table 07 43. Willey mill 01 44. Seed bin 5 kg 03 44. Water Bath 01 45. Seed bin 2.5 kg 03 45. Soil auger Post Hole 01 46. Official Armed wooden chair 10 46. Soil auger Scrow type 01 47. Hero Honda Cd 100ss 01 47. Steel Soil Auger 01 48. Lab Stool 2x1.5x1.5 06 48. Soil Sample Box 150 49. Mango rack wooden 01 49. Soil therma meter.6‟‟12‟‟& 18‟‟(3+3+3) 09 50. Katedar Patta 01 50. Shot beam balance 01 51. Kudal 10 51. Standard Analytical weight box 01 52. Hazara 02 52. Screen Projector 150×120cm with stand 01 53. Spade 10 53. Slide Projector & Slide carrier 01 54. Khurpi 10 54. Sam brass Portable gas generator 01 55. Hasiya 12 55. Sam brass horizontal shaker 01 56. Steel Trunk 01 56. Sew Magnetic stirrer 02 57. Maruti foot sprayer 03 57. Muffle Furnace 01 58. Tripoline 02 58. Water distillation apparatus 01 59. Aspe Power Sprayer 01 59. San brass stabilizer 01 60. Digita Lop peati from magnatic scale cap. 150 kg ( Macro) Balance 01 60. Extension board 01 61. Lock 03 61. D.C.M. Solar Desk Calculator 01 62. Kudal with wooden bet 06 62. Official chair 02 63. Khurpi 06 63. Official Maize 01 64. Phawara with wooden bet 04 64. Official wooden chair 02 65. Maruti foot sprayer 01 65. Steel officer Ex. Table Sunmica top 01 66. Hazara 02 66. Remington type machine English 01 67. Counter Scale with weight 01 67. Official Maize Sunmica Top 01 68. Power sprayer Aspee Bolomat rised Sprayer 01 68. Computer, Monitor, Keyboard, Mouse, U.P.S., Printer & C.P.U 1 set 69. Aspee Bolomat oriseed cum duster 01 70. Counter scale 20 kg cap. with weight 10 -50 01 71. Kudal 10 72. Phawara 10 73. Khurpi 05 74. Kudal 10 75. Khurpi 10 76. Hasiya 10 77. Phawara with wooden bet 10 78. Maruti foot sprayer 01 79. Ganesh Hand sprayer 01 80. Hand trailer manually operated 01 81. Pen Drive 02 82. Calculator 02 83. Tripoline 20x14 14x115 03 84. Calculator orpat 02 85. Kudal 06 86. Canon Power shot TS 95 Camera 01 87. Maruti hand sprayer 3 lit. 01 88. Phawada 10 89. Kudal 10 90. Khurpi 10 91. Spec Hand Sprayer 3 lit 01 92. Phawada 04 93. Phawada 10 94. Kudal 10 95. Yarco Incubater 01 96. NP-Based Flame photometer+Printer 2+2 97. Hot air oven 01 98. Hot air oven 01 99. Hand Refractometer 01 100. Hand Refractometer 03 101. Hygro meters 01 102. Whirlpool Refrigerator + stabilizer 01 103. Stabilizer Allivin 15 KVA 01 104. Voltage Stabilizer 15 KVA 01 105. Lab willey mill 01 106. Water bath 01 107. Sarvo Stabilizer 5 KVA 01 108. Vernier Callipers 04 109. Diel Vernier callipers 01 110. Pane balance cop. 1 to 2 Kg. 01 111. Weight box in wooden (cap 1 kg) 01 112. Ganesh hand sprayer 01 113. Stove 01 114. Bhagona with cover, Stealness steal slit cap 01 115. Knifer 12 116. Spoon 12 117. Forks 12 118. Chips cutter 02 119. Bhagona Aluminium with cover 02 120. Nova gas with Burner 01 121. Revaling Stool 15 122. Crown Carking Machine 01 123. Extension board 01 124. Extension board 01 125. Test tube Stand (72 tuber) 01 126. Mixes cum juices 01 127. Heating Mental cap 2 litr 02 128. Water Filter 01 129. Over Head Projector with stand 01 130. Hot Plate 01 131. Magnifying Lenss4”dia& 2”dia 04 132. Forceps fine 12 133. Top Pan Balance 01 134. Autolave Model AC-101 01 135. Getner Microscope 01 136. Lock NavTal 01 137. Rado 10 Liver 01 138. Rado 10 Liver 02 139. Devimal Balance 01 140. Medico Centrifuge Machine 01 141. Slide Cabinet 01 142. Pan Balance with Weight 1Kg 01 143. Hot Plate Coil Type 02 144. Analegue Conductivity Meter 01 145. Disc Electrophotesis apparatus 01 146. KjeldnalDistilation apparatus 01 147. Ph-Meter 01 148. Getnor photomicrography equipment 01 149. Standard Camera Lence for retino photo graphy 01 150. Pasturisation Bleaching Tank 01 151. Mufflle Furnace 01 152. W.T.C Deionises 01 153. Yarco Lux meter 01 154. Lab Heating Plate 01 155. Osaw Universal Masture meter 01 156. AT.CO. Electric Balance 02 157. Phone tonica 01 158. Soxter app. With heating mental 01 159. Extension app. 200ml Flask 06 160. Heating Mental cap,100ml,250ml, 100ml. 2000ml (3+3+3+3) 12 161. Hot air oven 01 162. Digital tap Loading Balance 01 163. Hot Air Oven 01 164. Digital Electric top loading balance 01 165. Plane Paper Copies 01 166. Whirlpool Refrigerator 310 litr 01 167. HP Scan Jet 01 168. Lab Stool 20 No +10 No 30 169. Exhibit Panel for outdoor size 01 170. White board 01 171. Calculator 01 172. Spring Balance 20Kg. Cap 01 173. IBM Nest Vista Computer 01 set 174. Portable Loose Steel yard Type balance (250Kg) 01 175. TUS Start U.P.S 01 176. Sharp Aj 800 colour Printer 01 177. Digital top loading balance 01 178. Godrej Refrigerator cap (300ltr) 01 179. Rakmi lock 7 Liver 03 180. U.P.S (AFC) 01 181. RD -116 -03 -Display Board 02 182. Tray dies (seed driver) 01 183. Seed Cabinet Form 03 184. Seed Cabinet Form 02 185. (1) B.O.D In cabateryorea 01 186. (2) Fluaescaltubeni 01 1.6 . MES Veg. Science 1. Rotavator Tractor Machine 01 - - - 1 Steel Almirah 4Nos 2. Terracer Blade 01 2 Grain bin 12Nos 3. Offset Disk Harrow 01 3 Maruti foot Sprayer 2Nos 4. Tractor Messi Forgussan with all instruments 01 4 Orient Hand Duster 1Nos 5. Bag clear Rebo Model DAR machine Sealing Machine 01 5 Torch 5Nos 6 Drum (200 lt cap.) 2Nos 7 Jack (5to10 tons) 1set 8 Stool wooden 6Nos 9 Iron plates 1500 Nos 10 Watering Cane 6 Nos 11 Weight of Iron 18Nos 12 Hasiya 6Nos 13 Steel Box 6Nos 14 Canester Tin 14Nos 15 Table 2Nos 16 PTO Pully 1Nos 17 Wooden Structure Self 2Nos 18 Laltain 1Nos 19 Sealer 1Nos 20 Chair Wooden 3Nos 21 House Pipe 60m 22 Spring Balance (10 kg cap) 2Nos 23 Balance Wooden Structure 1set 24 Network Component 4Nos 25 Maruti Hand Sprayer 1Nos 26 Lock 10Nos 27 Display Board with Stand 3Nos 28 Pump of diesel 1Nos 29 Measuring Cane (5lit cap) 1Nos 30 Measuring Cane (10 lit cap) 1Nos 31 Room Heater 1Nos 32 Weight Box 1Nos 33 Nap sac Sprayer 1Nos 34 Circular Hanging Balance 2Nos 35 Balance Plate (glass body) 1Nos 36 Galaicha (carpet) 1Nos 37 Sabbal Iron 1Nos 38 Iron Top (tasla) 5Nos 39 Kudal 27Nos 40 Spade (ordinary) 67Nos 41 Spade (TATA) 15Nos 42 Khurpa and Khurpi 62Nos 43 Axe 5Nos 44 Bucket Iron 7Nos 45 Ganesh Hand Sprayer 2Nos 46 Fan 4Nos 47 Plastic Drum 4Nos 48 Check Valve 1Nos 49 C. I band 1Nos 50 Flench 1Nos 51 Pan Balance 2Nos 52 Frant Dail Balance Top Balance 3Nos 53 Palastic Hand Sprayer 1Nos 54 Drum 1Nos 55 Cycle Hind 1Nos 56 Type Writer (Hand) Remington No 625576 1 Nos 57 Tripal 4 Nos 58 Book Self(Wooden) 2 Nos 59 Lock 4Nos 60 Hedge Shear 1 Nos 61 Plas (iron) 1 Nos 62 Punch 1 Nos 63 Steplar 1 Nos 64 Screw rinch 1 Nos 65 Nose Player 1 Nos 66 Chheni 1 Nos 67 Hammer 1 Nos 68 Dirbily 2 Nos 69 Penchcas 1 Nos 70 Reti 2 Nos 71 Tractor engine No 12526 Chasis No 002252 1Nos 72 Tractor Trolly 1Nos 73 Screper 1Nos 74 Disc Harrow 1Nos 75 Cultivator 2 Nos 76 Rickshaw 1Nos 77 Table 3Nos 78 Wooden Structure Self 5Nos 79 Diesel Engine 2Nos 80 Chair Wooden 5Nos 81 Cage Wheel 1 Set 82 Ridger (3 Farrow) 1Nos 83 Hand Pump 1Nos 84 Structure Iron 84Nos 85 Hand Cart 1Nos 86 Table Lab (wooden) 1Nos 87 Disc Plough 1Nos 1.7 . College Administration 1 - Resograph Automatic Master Printer K58001 01 No. 1 - Water Cooler 02 Nos. - - - 2 - Digital Copier/Laser Printer 01 No. 2 - Induction Verner 01 No. 3 - Vacum Cleaner Erodean Acc Model 01 No. 3 - Chair Steel 17 Nos. 4 - Sharp Fax FO 650 Machine 01 No. 4 - Power Inverter 01 No. 1.8 . Land Scape 1.9. Medicinal & Aromatic Plant 1. Pocket Refractometer 01 - - - - - - 2. Electronic top pan balance Model LCB -4B 150 g capacity K -Roy make 01 3. Villey grinder inner chamber, blades 40x25 mm Khera make Model KJ -110 (a) 01 4. Juicer cum grinder (Fisher) cap 1.0 litre 01 5. Semi Micro balance Sortorius Model -2004 01 6. Decimal balance Triple beam cap. 3kg Avon 01 7. Triple beam balance cap 0.111g 01 8. Borer set 01 9. Steel cork borer set 01 10. High speed centrifuge type C-24 Remi 01 11. Centrifuge medico Remi 01 12. Chromatography drier 01 13. Thin layer chromatography kit 01 14. IEC-222 Descicator cabinet of thick guage alluminium stand glass door 01 15. Indian Two bed portable Deionizer model C-A- 20 IU 01 16. Sambrass portable gas generator type-12 with burner 01 17. Glass cutter Kohinoor 01 18. Grinding mill (Villey mill type) 100 mm Yorco 01 19. Heating mantle with energy regulator capacity 5000 ml 1000 ml 500 ml 250 ml 100 ml 50 ml 05 02 02 02 02 02 20. Laboratory heating plate with regulator size 45x60 cm 02 21. Hot plate electric(CICE) round size 12” dia. 01 22. Knife steel 02 23. Micro kjeldoll stand (prequel type) 02 24. Lock 01 25. Lock 01 26. Pump plier 01 27. Screw driver 01 28. Muffle furnace MIC make size 12x6x6 01 29. Melting point apparatus with cooling plug 01 30. Moisture meter optics 01 31. Chromatography oven front opening 650x650x600mm 01 32. Sew make oven vacuum size dia. 300x300 mm 01 33. Systronics griph pH meter portable battery operated 01 34. Flame photometer (Systronics) with spare parts- Burner unit ; Galvanometer ; Compressor Each 01 35. Research Polorimeter- Getnor SP-02 01 36. Leonard refrigerator cap. 286 lit. 01 37. Rotary vacuum flask evaporator-Toshniwal 01 38. Abbo type refractometer 01 39. Burrett stand (iron) without clip 02 40. Tripod stand small size long size 04 02 41. Stand & clamp iron AJE make 10 42. Stand for clavenger apparatus 04 43. Flask shaker for 04 flasks AJE 01 44. Reciprocating shaker 01 45. Sand bath electrically heated double walled 01 46. Spectronic-20 Bush & Lomb model USA 01 47. Spatula stainless steel 05 48. Spatula stainless steel Big Small 03 02 49. Scissor stainless steel 03 50. Remi make medium duty stirrer with1/2 HP motor model R.O.1240 01 51. Magnetic stirrer with hot plate cap 2 lit. 01 52. Stop watch 01 53. Soil spoon set 01 54. Temperature control unit with energy regulator MIC make 01 55. Voltage stabilizer 5kva Khera 01 56. Weight box 01 57. Paraffin embedding water bath cooper 01 58. Water bath cylindrical 25x20 cm 01 59. Water bath cylindrical 25x15 cm 01 60. Water bath rectangular 25x35x10 with 6 hole 7.5cm dia. 01 61. Lock Harison lock Prince 01 01 62. Heating mentle cap. 5 lit. Tanco make PLT 165 02 63. Heating mentle cap. 10 lit. Tanco make 01 64. Enamel trey 8”x6” 12”x10” 18”x12” 05 05 04 65. Lab table size 5′x2.5′x3′ (sun mica top) Lab table 5′x2.5′x3′ (ply top) 02 02 66. Chromatography cabinet wooden size 600x600x300 mm 825x825x225 mm 01 01 67. Flask stand seesham wood 04 68. Lab table Sun mica top with rack 7′x2.5′x3′ 02 69. Stool revolving 18”x12”x12” 04 70. Office chair rectangular pipe 01 71. Physical balance Avon make 01 72. Physical weight box 01 73. Single pan balance model K -14 KRoy make 01 74. Stabilizer 1.0 kva sagar make 01 75. Mixer cum grinder cap 1.0 lit. 01 76. Autoclave vertical 250x450 mm 01 77. Hot plate electric CICE round size 12″ dia. 01 78. Cintex heating mantle cap 2.0 lit. 02 79. Laboratory stool with sun mica top 03 80. Tinocular microscope with accessories model METZ779A 01 set 81. Leetz base slide microtone 1400 with flooring 01 82. Sprit lamp 01 83. Wooden hood show case size 2′x1.5′x2.5′ glass covering 01 84. Glass equipment wet & dry thermometer 01 85. Emergency light with battery 01 86. Scientific calculator 01 87. Maruti foot sprayer 01 88. Hazara 04 2. College of Fisheries 2.1 College of Fisheries Farm 1. Almira Steel size 1525×760×460mm 01 - - - - - - 2. Wooden Table Sunmica Top size 4×2×2.5 01 3. Laboratory Table Wooden Top Sunmica 01 4. Chair Arms Wooden 02 5. Chair Teak Wooden Arms 01 6. C.M.C.Chair Revolving 01 7. Chair Wooden Officer 01 8. Calculator 01 9. Iron Box size 4×2.25×2.5 01 10. Tulaman Balance 5kg Cap. 01 11. Tarch Three Cell 01 12. Centrifugal Machine Han Driven Four tube 01 13. Chair Wooden (Teak)Officer 01 14. Chair Officer Teak Wooden 01 15. Chair Arms 03 07 16. Table Steel size1220×760×760mm. 01 17. Table Wooden 4×2×2.5 01 18. Black Board Tigodiya Size6×2×1.5 01 19. Wall Watch (Quartz) 01 20. Almirah Steel size 1525×760×460mm. 01 21. Air Cooler,Symphony 01 22. Dissecting Stand Wooden 02 23. Air Compressor withoutBatery. 01 24. Refrigerator (Godrej) 01 25. Stablizer 01 26. Stablizer Vilex 01 27. Stablizer Stand 01 28. Stapler Small 02 29. Oxygen Gass Cylinder with Regulator 01 30. Pond Aretor 1.2H.P. 01 31. Stool Wooden size 1.5×2.5×1 01 32. Heater 02 33. White Borad size 120×120cm. 01 34. Exibites Pannel for Indoor use size 120×60cm. 01 35. U.P.S.Battery 01 36. Computer Simence 01 37. Scan jet H.P.2300C 01 38. H.P.Inkjet Printer Model SS50 01 39. Wooden Board (deptt.) Size2×1.5 01 40. Pulli 01 41. Lineva Think Desk top Computer 01 42. Spectro Calorimeter 01 43. Streching plate 01 44. Heatingh mental 01 45. Dissolve Oxygen Meter 01 46. Portable Digital ph meter 01 47. Digital Nephelo -Terbidity Meter 01 48. Hot plate 01 49. Slide Projecter 01 50. Type Riter Hindi 01 51. Type Riter English 01 52. Lejar printer colour hp 01 53. White Board 120×120cm. 01 54. Exhibit panel size120×60cm 01 55 Fawada 2 56 Torch Everready Three cell 1 57 Injan Kriloskar 8 H.P.with Assosries 1 58 Trolly Iron 1 59 Khurpi 1 60 Hansiya 1 61 Motar Strater 7.5H.P. 1 62 Kriloskar Pump HWAD100MMFLP 1 63 Plankton net 1 64 Kriloskar Electric Moter 3 Phase 7.5 H.P. 1 65 Main swith 32 AM. 1 66 Moter Stratar 1 3. Directorate of Research photocopier machine 4. D.W.P 1. Steel Almirah Big Size 1 No. - - - 2- e stfjax V si 15 eh0 01 2. M. S. Conduit pipe ¾ 215 Nos. 3- e stfjax V si 03 eh0 01 3. Damage old high level cistern 25 Nos. 4- :e dwyj dsu0LVkj e sd 01 4. G.I. Hooks 3 Bag 5- QksVks dkfi;j ekMy ,p0ih0 420 01 5. C. I. Pipe 3 & 2 ɸ 6´ long 18 Nos. 6- CY;w fizUV e‛khu 01 6. CI Tee 4 size 30 Nos. 7- vksYM Mªe 04 7. C I Bend 4 size 15 Nos. 8- pSu fVfdy 01 8. C I Cowel 4 25 Nos. 9- ,DlkbM cSV ªh 08 9. Old Main Switch 30 Nos. 10- dEI;wVj ,p0lh0,y0 vksYM ekMy 01 10. Old Starter 4 Nos. 11- Q SDl e‛khu 01 11. Old 63 kVA Gen set with Radiater 1 No. 12. Old NRV 6 size 1 No. 13. Scrap C 1 (Sanitary) L. S. 14. Scrap G 1 (Water Supply) L. S. 15. M. S. Pipe 4 Damage 15 Nos. 16. Scrap M. S. Angle pieces L. S. 17. Diesel Tank 200 Lts. old 1 No. 18. Old PVC Scrap L. S. 19. CID Joint 6 size 15 pair 20. Air cooler without fan 4 Nos. 21. Sodium Light fitting 100 Nos. 22. Genset 15 kVA 01 No. 23. Inverter Old Model 1600 VA 01 No. 24. 7.5 K.V.A. Gense . Sports 1 Allgro Cycle 02 1 Chair Wooden 10 - - - 2 Basket Pole with board 1.30mt.x1.2mt. 01 set 2 Score Board Cricket 01 3 Basket Ball Board Ply 01 set 3 Score Board VolleyBall 01 4 Body Boom 02 4 Score Board Foot Ball 01 5 Back - Hiper 01 5 Score Board Hockey 01 6 Cycle Hero 01 6 Almirah Big 01 7 Climbing Stand 01 7 Parallettes Bar 01 8 Clock 01 8 Aeroline Mini Stopper 01 9 Duplex Twist Machine GYM 01 9 Almirah Small 01 10 Dumbles 02 pc 10 Plcetic Chaur 03 11 Dumbles 04 pc 12 Foot Ball Pole 01 set 13 Fabara ¼ QkSvkjk ½ 03 02 14 Khurpa 04 07 15 Hasiya 02 16 Daroti 01 17 Leg Ext Machine 01 18 Multi Hyper 01 19 Bonch Machine 01 20 Hand Cart Pipe 01 21 Stop Watch 03 22 Hammer 16lb 01 01 8lb 01 23 Hammer 12 lb;16lb 01 01 24 Hurdles 30 25 Hurdles 54 10 26 Hand Ball Pole 01 set 27 Hockey Goal Board 01 set 28 Hand cart 01 29 Hazara 02 30 Locks 02 05 01 31 Locks 01 32 Leg Press Machine 01 33 Line Marking Machine 01 34 Casttle amplifire 01 35 Horn Ahiye 02 36 Lunit Driver 02 37 Microphone 02 38 Microphone 01 39 Sound Colum 02 40 Microphone Stand 02 41 Microphone GTP 01 42 100 mire 100 mt 43 One Are 01 44 One Ballog 01 45 Cassettes 06 46 Extension 01 47 Petro Max 01 (2kg) 48 Biven Back 01 ladies 01 Gents 49 Calculator 01 50 Sector 02 51 Stop Watch Table 01 01 52 Starting Block 02 03 53 Basket Board 1.84x1.22 ply 02 pcs 54 Basket Board ply 04 55 Basket Ball 6” Steel Pipe with ring 01 set 56 Basket Ball Board Fibre 01 set 57 Exercise G202 01 58 Power Mistri functional Shocket 01 59 Jogger 01 60 Power Steeper 01 61 Vibretor Massager Sharp 01 62 Multi Gym Station 01 63 Foot Massager 01 64 Twister 01 7 Hospital 7.1. Hospital (A) scrap 8. College of Home Science 8.1. Home science (Dean Ofc) 1. Zerox W.C. Pro 420 Copier 01 - - - - - - 2. Digital Photo Copier Toshiba ES -163 01 3. Zerox photo Copier 5821 -IV 01 4. Calculator 03 5. Digital Multifunction fax 01 6. Godrej Chair CH -4012 With Desk 11 7. Calculator 02 8. Hindi Manual Type writer 01 9. Calculator 01 8.2. Centrel Store (Dean Ofc) 1. Chair Wooden Armetic 01 2. Chair Wooden Armetic 02 3. Chair Wooden Armetic 05 4. Student Chair Wooden 40 5. English Type Writer 01 6. By Language Type Writer 01 7. Mestetner Duplicating machine 01 8. Canon Plus Paper Copier Machine 01 8.3. Textile & Appareal Designing 1. Hot Plate 01 2. Swing Machine Wooden Box Cover 01 3. Press Table 02 4. USHA Sewing Machine Wooden Cover 03 5. Physical Balance 02 6. Thread Box Fiber 01 7. Threader 01 8. Stove 01 9. Patila With Lid 01 10. Single Pan Balance K-14 super 2 K.G 01 8.4 Family Resource Management& Consumer Science 1. Press 2 2. Scissors big 2 3. Scissors small 2 4. Emergency light (ORPAT) 1 5. Remson O.T.G. 1 6. Victimizers model vis-512 1 7. Softel ice cream machine 1 8. Zirob filter 1 9. Domestic flour mill complete unit 1 10. Stabilizer vucum-4 1 11. Stabilizer veelex 110 to 290 1 12. Teaching and documentary education C.D. 1 13. Video recording documentary education C.D. 1 14. Pedelite C.D. SENSORS 3 15. Bajaj water filter 1 16. Montal 1 17. Refrigerator godrej 300 LIT. 1 18. Godrej Refrigerator 165 lit. 1 19. Stabilizer 0.5 KVA 1 20. Towelstand 1 21. Dressing table with glass 3 1 22. Deewan size 6‟x3‟ sunmica posted with box 1 23. Folding cotsize 6x3x1.5 6 24. Folding chair 4 25. Dining table with 6 chair 1 26. Deval watch Quartz 1 27. Table watch with alarm 1 28. Lock 2 29. Charge 6/12 volt 1 30. Sun Hot Emerson rod 2 31. Stabilizer 2 KVA 1 32. Food Processor 6005A00 1 33. Food Processor Jar 1 34. Kodak Camera with real 1 35. Philips steam iron 1 36. Mops 2 37. Merit Universal umbrella Sewing Machine 1 8.5. Food Science & Nutrition 1. Balance 5kg Dial type 2 2. Balance 1 kg dial type 6 3. Personal weighing machine 1 4. Analytical balance double pan AVON Make Model AB-F1 Capacity 200g 1 5. Voltas Stabilizer Vilex EWR 110-290 1 6. Voltas Stabilizer 1 7. Stabilizer 0.5 KVA for Refrigerator 1 8. Stabilizer 850 VA (fitted in refrigerator coca cola) 1 9. Bomb calorie meter with digital display Telco Make Model PLT-300 1 10. Bhagona St. steel with cover 19 cm 4 11. Bhagonaalluminium with cover 1 12. Knife 10 13. ChaklaBelan 7 14. ChaklaBelan 10 15. Cooker 6.5 lit. Howkins 1 16. Cooker Anupam 4 17. Howkins Pressure cooker 2 lit. 10 18. Idly cooker 1 19. Chhani 5 20. Glass steel 12 21. Gas cylinder 1.8 kg with lamp attachment 5 22. Stove Caption 6 23. Electronic Gas lighter 2 24. Gas tandoor (podimin) 1 25. Jug steel 2 26. Jug steel 2 27. Katori St. steel small 10 28. Katori steel 05 29. Chili cutter 1 30. Fanlastique Vegetable cutter 1 31. Kalchhi steel big 2 32. Greater 2 33. Booti mixer 1 34. Juicer attachment 1 35. Food processor singer 1 36. Mug tea 12 37. Muffles furnish regulator lamp model 5 KW Cap. Size 200x 200x300 mm retery J.K.W.9000C Model K1- 180 khera Make 1 38. Maharaja ketli White Line electric Kettle 1.7 lit. 1 39. O.T.G. bajaj Oven 1 40. Super Flame O.T.G oven with glass door with timer 1 41. Renold hot food cabinet box type 1 42. Knife cum peeler 2 43. Pelicane fitter cap. 20 lit. 1 44. Refrigerator Allvinindia ltd. 165 lit. cap. 1 45. Godrej Refrigerator 300 ltr. cold & gold Blue Compressor no. 146105 cabinet no. 146105 1 46. Stove nootan 5 47. Nootan stove 5 48. Tea spoon 12 49. Laboratory Table sheesam wooden top sunmica 60x30x30 1 50. Tava 2 51. Thali (2.400g) 5 52. Balti 1 53. Tea pot Melton 2 lit. 1 54. Container tin 15 kg 4 55. Vaccum pump (yarko make) cap. 45 lit./mit, 0.25 HP 1 single stage cat no. YSI-538-(-) less special discount @ 2% 56. Vaccum pump single stage cap. 25 lit. H.P. motor .25 model K1-106 1 57. Strainer (chalni) 1 9. Guest House 9.1 VC Residence College of Veterinary Science 1 0.1 Vet. Biochemistry 1 Automatic slide projector Getner MP 410 01 - - - - - - 2 Balance cell colorimeter 102 Systronics 01 3 Chinometric balance 01 4 Clinical chemistry analyzer 171 Systronics 01 5 Densitometer 205 Autoscanning computing Systronics 01 6 Flame Photometer CL360 ELICO 01 7 Glucometer 01 8 Lab Heating Plate with cast iron top 01 9 Lab wooden stool 05 10 Muffel Furnace 18x9x9 01 11 Over head projector RG200 -05 01 12 pH analyzer LI612 ELICO 01 13 Refrigerator 300Lit Capacity Godrej 02 14 Spectroflurometer SL 174 ELICO 01 15 Spectronic 20 Milton Roy 01 16 Triple Beam Blance direct reading 0.1 to 111 Grms 01 17 UV -VIS Spectrophotometer 119 Systronics 01 18 UV -VIS Spectrophotometer 117 Systronics 01 19 Wooden chair 05 20 Kyocera Mita Digital Printer (Taskalfa 180) 01 21 Analytical weight box upto 50grm 01 22 Physical Balance 01 23 R - E - G - N -008 Primary Gradient HPLC System with HD 461 SN003 01 24 VDO Cassette;Cell structural unit of life 01 25 VDO Cassette;Cell & What they Do 01 26 VDO Cassette;Cell Biology cytoplasm 01 27 VDO Cassette;Cell Biology Nucleus 01 28 VDO Cassette;Cell Biology the Plasma membrane 01 29 VDO Cassette;Cell Biology structure & composition 01 30 VDO Cassette;Biotechnology 01 31 VDO Cassette; Genetics:Improving plant and animals 01 32 VDO Cassette; Biological science:Molecular Biology 01 33 Transparency sheet Box Code No. 201 -04 Rescholar 01 34 Projection screen tripod model deluxe code No RO 2007 -01 01 35 Transparency Kit Cat. no.RO2001 -05 01 36 APC Back UPS 800 VA 01 37 HP Laserjet printer 2015 01 38 UPS 500 VA Mega Blue Bird 01 39 HP Computer PC DX 2280 Desktop PC 01 10.2 Animal Breeding & Genetics 1. Table VDO Size 04 1. Inclind Student Microscope 05 - - - 2. HP Laser jet 5 01 2. 3. HP Laser jet 1100 & Printer 01 3. 4. HP Desk Jet 970 01 4. Microscope Inclind Getner 01 5. HP Scan Jet 5200 c 01 5. Over Head Projector with Accessories 01 6. Zenith Pentium PC System with Accessories 02 6. Auto Slide Projector 01 7. 1 KVA Eltech UPS 01 7. Accessories for slide projector spare magazine 50 slide spare Halogen Temp 02 02 8. 1 KVA Eltek UPS 01 8. True Power UPS 1KVA 01 9. 3 KVA Eltek UPS 01 9. Kill buen document Binder 28 mm 01 10. Minolta EP 3170 Copier 01 10 . Duplicater Model 145 01 11. 2 KVA Voltage Stabilizer 01 11 . Godrej Type writer 01 12. 5 KVA Voltage Stabilizer 01 13. Window AC 1.5 ton with Accessories 02 14. Compaq Presario Computer with Accessories 04 15. Compaq Presario Computer with Accessories 03 16. Computer HCL with Accessories 03 17. HP Desktop 8000 series with Accessories 02 18. Tripple Beam Balance 01 10.3 Livestock Products Thechnology 1. HP Compaq PC DX 2280 desktop PC 1 No. 1. pH meter pen type digital microprocessor based with temp. campen 1 No - - - 2. HP Laser Printer 1320 N 1 No. 2. Cream Seperator (hand drive) 1 No 1. Transparency Sheet Box 1 No 3. Bottle washing machine 1 No 4. Ice cream freezer electric drive with electric moter 1 /2 hp 1 No 5. Ice Chamber 3 No 6. Milk Stainer 12 No 7. MBR Bath 1 No 8. Iron Bhatti 1 No 9. HP Colour Laser Printer CP 1215 1 No. 10 . 800 VAPC BACK UPS model BE 800 1 11 . 500 VAPC BACK UPS model BE 800 1 12 . Toner Cartridge 1 13 . Calculator 1 14 Battery 02 . 15. Protein Digestion Assembly 01 16. Kjeldahl Apparatus 01 1 0.4 Pharmacology & Toxicology 1 Vaccum Pump 1 1 Computer Compaq Presario 1 - - - 2 Refrigerator + Stabilizer 1 2 Over Head Projector 1 3 Electro -Convelsometer 1 3 Autoanalyser 1 4 Chinametric Analytical Balance 1 4 Chemical Balance 6 5 Pricription Balance 2 6 Perforated Board 1 7 UPS, APC 1 8 Spectrophotometer 1 9 UP Based Ph Analyser 1 10 Room Heater 2 11 Analgesiometer Tail Flick Method 1 12 Rota Rod Apparatus 1 13 Digital Electronic Top Loading Balance 1 14 APS Back UPS 1 15 Deep Freezer 1 16 Water steel Wall Mounting 1 17 Serological Water Bath 1 18 Vertex Shaker 1 19 Micro Tissue Homogenizer 1 20 Electro -Convalsometer 1 21 Isolated Organ Bath 1 22 Pole Climbing Apparatus 1 23 Singal Pan Electrical Balance 1 1 0.5 Public Health & Epidemiology 1. BOD Incubator “Tanco‟ 1 No - - - - - - 2. Refrigerator Godrej 303 Lit 1 No 3. Low Temp. Freezer “Tanco‟ 1 No 4. Quick Freezer “Mac‟ 1 No 5. pH Meter “Tanco‟ 1 No 6. Desk Top Computer HP 8000 Series 1 No 7. Printer HP(colour Laser Jet cp 1515n) 1 No 8. UPS (APC Back UPS RS 800 1 No 10.6 Gynecology & Obstetrics (Category A) Gynecology & Obstetrics (Category B) 1 HP Desktop PC (CPU+Monitor+Mouse+Key Board) 01 1 Dell Laptop (Accessory item) 01 - - - 2 Digital Electronic Top Loading Balance, capacity 300 gm 01 2 Digital Camera Sony Make (Accessory item) 01 3 Rescholar Overhead Projector Supreme 01 3 HP Deskjet Printer (Accessory item) 01 4 HP Laser Printer 01 5 800 VA APC Back UPS 01 6 Computer Table 01 7 Revolving Chair 01 8 Hand-held UV Lamp 01 9 Ultra Low Temperature Research Cabinet Yarco 01 10 Thermo heating Stage 01 11 Universal Trinocular Research Microscope MDILUX 01 12 Advanced digital colored video system 01 13 HP desktop computer set DX2480 01 14 HP laser printer -1005 01 15 650 VA APC UPS 01 16 Eleco FG LI 614Ph meter 01 17 Quick Freezer (Remi) 265 lit 01 18 Submarine Electrophoresis (Sonar) 01 19 Vertical Slab Electrophoresis (Sonar) 01 20 Digital Power Supply for Electrophoresis (Sonar) 01 21 High precision digital scale (Sonar) 01 22 Air Cartel (Sonar) 01 23 UV Sterile Chamber (Sonar) 01 24 Dell E-5410 Laptop 02 25 Reliance Data card 01 26 Analytical Balance Merck, 234 DE 01 27 Godrej Split AC (1.5 TON) Gse18F 3W 1 M 01 28 Digital Copier with printer & trey WC 5020 01 29 Stabilizer (3 kVA) 01 30 Pass Box Micro Make MSW-183 02 31 Economy Executive Chair 01 1 0.7 Vet. Surgery& Radiology 1 - Refrigerator (300Lt Godrej Cold Gold) 1 - - - - - - 2 - Stablizer Velex 0.5 kva 1 3 - Godrej Revolving Chair CHR -7 1014 1 4 - Weighing Machine( Libra make) 1 5 - Perforated Board 1 6 - Electric Emergency Light (Bpl dry battery) 1 7 - Mechanical Balance (200gm Capacity with .001gm readability & 90mm pan size). 1 8 - Auto razor Sharpener 1 9 - HP Computer ( pcd x 2280 desktop PC With CPU,Monitor,keyboard,Mouse) 1 10 - HP Laser jet Printer 1320 1 11 - UPS (800va apc Back ups modal BE800 1 12 - Over head projector (a) Suvira (b)Rescholar 11 13 - Microtome precision rotary 1 14 Microtome Razor 1 15 - Microtome Knife 120mm khera 1 16 - Magenetic Hot Plate stirrer 1 17 - Lab Table( C Cupboard 8x4x2.1‟) 2 1 0.8 Anotomy & Histology 1 Automatic Tissue Processor Deluxe Model SP 40 01 01 Wooden Chair Officer with Arm 01 - - - 2 Triple Beam Balance for direct Reading 3 Kg (Khera Model) 01 3 Triple Beam Balance for direct Reading 3 Kg (Khera Model) 01 4 Refrigeration with Stabilizer 300 lit. 01 5 Black Board with Stand 01 6 Drill Machine (Electric) 01 7 Stool Sunmica Top 06 8 Lab Stool Wooden 09 9 Godrej Chair PCH-1014 (750 x750 x 920 mm) 01 10 Godrej Chair CHR - 7 (560 x560 x 900 mm) with Arm 03 11 Godrej Chair CHR -7 without Arm 01 12 - Wooden Chair with Arm 03 1 0.9 Vet. Parasitalogy 1 Laboratry Centrifuge Machine (MAC) 4×50ml 1 1 H.P.Compaqe PC D×2280 Desk Top 1 - - - 2 B.O.D. Incubator (MAC) 500×830×415 1 2 800VA APC Back UPS 1 3 H.B.Meter Digital M.S.W. 547 1 3 H.P.Inkjet Printer 1 4 Chair (Revolving) Godrej 1 5 Bench (Wooden) 4 seater cat no.23 1 6 Staff Chair (Wooden) 5 10.10 Physiology&Bio Chemistry 1 Olympus Inclined Binacular Microscope 04 1 Sphignomanometer 05 - - - 2 Medilux-12 01 2 Mercury Sphignomanometer 04 3 Getner Binacular Microscope 01 3 Orpat Telephone 01 4 Godrej Refrigerator 300 Lit. 01 4 Isolated Organbath(MAC)MSW-722 02 5 Over Head Projector SUVIRA-301 01 5 Scientific Calculator 01 6 Mediflame Photometer Model -127 01 6 Medzer Monocular Microscope METZ777 03 7 Flame Photometer Model-CL-360 01 7 Officer Chair Wooden Armed 01 8 Stool Sunmica Top 03 8 Microscope Getner 01 9 UPS 800 VA,APC Model-800 01 9 Spare Cutter for Gel 01 10 IEC Electrophoresis 01 11 Disc Electrophoresis 01 10.11 Vet. Pathology 1 Microtome Precision Rotary YSI 114 01 - - - - - - 2 Microtome Precision Rotary Lip Shaw type MAC Make Cat No. MSW 452 01 3 Shaking Machine Type Yarko Make YSPL-516 01 10.12 Vet. Medicine 1. Deep freezer 01 1. PH metre 01 - - - 2. Milk analyser 01 2. PH metre 01 3. UPS 01 3. Stablizer 01 4. UPS 01 4. Stablizer 01 5. UPS 01 6. UPS 01 7. Printer 01 8. Printer 01 9. Rescholar Over Head Projector 01 10 Stablizer 01 10.13 Vet. L.P.M 1 Compact Centrifuge 1 1 Incline Student Microscope 4 1 Erma scope EP 404 1 2 Single Pan Balance 1 2 Steel table sun mica top with side drawers 1 2 Microtome 1 3 Hot Air Oven 1 3 Steel table sun mica 1 3 Mannual Type Writer 1 4 Lab Heating Plate with cast iron top 1 5 Triple Beam Balance 3 Kg 1 6 Triple Beam Balance 111gm 1 7 Microscope Monocular 2 8 Dissecting Microscope 2 9 Incline binocular Microscope 2 10 Trans Cope Compact Portable over head projector 1 11 Godrej chair without arm 1 12 Godrej chair 2 13 Refrigerator 1 14 Voltage stabilizer 1 15 Micro processor stirrer combined 1 16 Office table 1 17 UPS 800VA 1 18 Enameled kidney trey 8ʺ 1 19 Enameled kidney trey 10ʺ 1 20 Enameled kidney trey 12ʺ 1 21 Bull Holder 5 22 Enameled Mug 7cm 1 23 Enameled Mug 12cm 1 24 Enameled Funnel 6ʺ 1 25 Enameled Wash Basin 30cm 1 26 Enameled Wash Basin 36cm 1 27 Enameled Wash Basin 40cm 1 28 Enameled trey without cover 12x10 1 29 Enameled trey without cover 12x14 1 30 Enameled trey without cover 18x24 1 31 Enameled trey with cover 8x10 1 32 Enameled trey without cover 12x10 1 33 Enameled jug 2 point 1 34 Enameled jug 4 point 1 35 Enameled jug 6 point 1 36 Enameled bucket with cover 10ʺ 1 37 Enameled bucket with cover 11ʺ 1 38 Stomach pump set 1 39 Mouth Gag (Wooden ) 3 40 Mouth Gag Vernels 2 41 Tooth Cutter 2 42 Stomach Pump Complete 2 43 Rumenotomy set 2 44 Rumenotomy set best quality 2 45 Hoof Trimmer 5 46 Hoof Cutter 2 47 Curry Comb (horse) 8 48 Dandy Brush 1 49 Body Brush 2 50 Body Brush Super 4 51 Ridding Briddle (single/double) 2 52 Polo Saddle 1set 53 Driving bridle 2 54 Muzzle leather 2 55 Harness collar 2 56 Hobbles casting hitting for horse 4 57 Tooth Rasp Super Quality 1 58 Head Roap 5 59 Hoof Picker (horse) 2 60 Harness Saddle 1set 61 Harness crupper 2 62 Riding Saddle 1set 63 Cellophane roll 1 1 0.14 Vet. Extension Education 1. Computer -IBM 01 1. Student chair - wooden 03 - - - 2. UPS -IMS, 60 min. backup 01 3. UPS -Kukrej -03 min backup. 01 4. Exhibit panel outdoor -150x90 cm 03 5. Dual purpose, half exhibit& white 01 6. Stool - sunmika top 02 7. Chair armless, wooden 10 1 0.15 Animal Nutrition 1. Chainometric Analytical Balane Macromake 3 - - - 1 Autoclave - 2. Chemical Balance 1 3. Triple Beam Balance (110 g) 1 4. Triple Beam Balance (3000 g) 1 5. Triple Beam Balance (5000 g) 1 6. Refrigerator (Allwyn withstand and stabilizer) 1 7. Refrigerator (Godrej with stabilizer) 1 8. Vaccum pump (0.25 H.P) 1 9. Water Bath (10 ×6 steel round) 1 10. Water Bath (Single Wall size) 1 11. Bomb Calorimeter MSW 1 12. Low cost freezer (MAC) 1 13. H.P. Compaq Desktop with printer and UPS 1 14. H.P. Compaq Desktop with printer and UPS 1 15. Metabolic Shaker Chamber 1 16. Vortex Mixture 1 17. Willey grinder mill (0.25 H.P.) 1 18. U controlled based P.H. System (Systronic) 1 19. Spectrophotometer (Systronic) 1 20. HP printer jet1360 1 21. CD writter 1 22. Over Head projector (SUVIRA) 1 23. Over Head projector (Reschlor) 1 24. Over Head projector (Trolley) 1 25. Projection Screen 1 26. Projection Screen 1 27. Lab stool (Wooden) 5 28. Armed Cushion Chair 3 29. Name Plate(Big Size) 8 30. Name Plate(Small Size) 3 31. Perforated Board(180 × 90) 2 10.16 Teaching Veterinary 1. Armed Office Chair Wooden 05 1. Laminated Chart Framed on 6 mm ply with beading (22”x28”) 24 16 1. Street Light fitting (Removed from VCC building and Electric poles for replacement with LED lights) 7 No 2. Christensan‟s teat Slitting scissors 4 2. Name plate on 12 mm Ply (2‟x1‟) 10 2. Tube light Fittings 20 N0 3. Conical Teat Tumor Extractor 4 3. Name plate on 12 mm Ply (6‟‟x11‟‟) 10 3. Ceiling Fan 02 No 4. Dressing Scissors 4 4. Stethoscope 2 1 4. Fan Rod 20 No 5. Ear Cropping Clamp 4 5. Torch 1 5. Guiser 01 No 6. Intestinal Clamp 4 6. Uterine Catheter 4 6. Metallic Window Frame 02 No 7. Orthopedic Hammer 2 7. Uterine Scissors 2 7. Refrigerator 300 Lit Alwin 01 No 8. Orthopaedic wire Saw 2 8. Hug Teat Lancet 4 8. Metal Net Frame 05 No 9. Pliers/ Plas 2 9. Teat Slitter Single Blade 4 9. Wooden Net Door 01 No 10. UP Bsaed double beam UV -Vis Spectrophotometer with accessories 1 10. Teat Tumor Extractor 2 10. Plastic Water Tank 01 No 11. Suture Cutting Scissors 2 11. Teat Plug 4 11. MCV Box/ Main switch 05 No 12. Shadowless Lamp 1 12. B. P. Handle No - 3 4 13. Thumb Forceps 4 13. B. P. Handle No - 4 4 14. Teat Tumor Extractor 4 14. Bistouri 6 15. Teat bistouri with conceal blade 4 15. Mouth Gag 1 16. Teat canula 4 16. Swab Holder 4 17. Wokman scoup 4 17. Sterilizer Hooks 5 18. HP Desk Jet Printer D 4368 (@ 40% / annum) 1 18. Tooth Forceps 10 19. ECG machine Single Channel (MAC -MSW 734) 1 19. Forceps 4 20. Remi revolutionary gen purpose lab Centrifuge 1 20. Scalpal 1 21. Swingout Head with graduated conical tube cat - R -81 Remi (Fixed in Centrifuge) 1 21. Instrument Tray (30x45 cm) 1 22. Sony handicam Model DCR SC 36 E, Sr no. 294249* (@ 40% / annum) 1 22. Kidney Tray 25 cm 1 23. Compact Multimedia Projector Getner make (@ 40% / annum) 1 24. Digital haemoglobinometer HBI „MAC‟ MSW -547 1 25. Stop watch Tanco 2 26. Plastic coated Projector Screen PS.501 tripod Model Suvira 1 27. Suvira Laser Pointer GP -203 Getner 1 28. PC Based Micro Scan (ELISA Reader) with accessories (@ 40% / annum) 1 29. Hoof Plane 2 30. Long Fine Teat Bistouri 4 31. Long Fine Teat Bistouri Probe pointed 4 32. Green Teat slitter 4 33. Teat lancet 5 34. Farrier‟s Hammer 2 35. Probang 2 36. Hoof tester 2 37. Trefine Teat Knife 4 38. PH Meter with ATC probe and combined electrode (CL -51B) Elico LI -614) 1 39. Rescholar Dual Purpose Half Exhibit Half White 1 (150x120cm Cm) 40. Rescholar Perforated Board (180x90 Cm) 1 41. 800 VA APC Back UPS (BE 800 IN (@ 40% / annum) 1 42. Armless Student Chair wooden 10 43. Four Seater Wooden (Shesham) Bench with Plastic cone seat and back 2 44. Chair X-103 (Methodex) 1 45. Burdizzo Castrator LA 1 46. Trocar and Canula for SA 2 47. Triple Beam Balance (Direct Reading) Model ABTi12) 1 48. Whelping Forceps 2 49. Slide Box for 100 slide 4 50. Instrument Pocket Case 1 51. Bowl SS 20 cm 2 52. Paragon Knife 2 53. Artery Forceps 3 54. Test tube Stand Aluminium 3 55. Triple Stand 6 56. Obstetrics Instrument Complete Set 2 57. Wooden bench (6‟x3‟ 1.5‟) 1 58. Liquid Nitrogen Container Model CB-20 cap 20 Lit 2 59. Dark Room Safe Light 2 60. Film Drying Rack 1 61. Film hanger 6”x8” 3 62. Film hanger 8”x10” 3 63. Film hanger 10”x12” 3 64. Film hanger 12”x15” 1 65. Film Holding Clip 4 66. Lead Apron 2 67. Processing Tank 13.5 Lt with Lid 1 68. X-Ray cassette 6”x8” 4 69. X-Ray cassette 8”x10” 4 70. X-Ray cassette 10”x12” 4 71. X-Ray cassette 12”x15” 3 72. X-Ray Film Viewer (Single Plate) 2 73. Seimens X-ray unit Fixed with Rotary anode 300 1 mA machine with accessories 74. Intensifying screen 6”x8” 4 75. Intensifying screen 8”x10” 4 76. Intensifying screen 10”x12” 4 77. Intensifying screen 12”x15” 3 78. Measuring Caliper 1 1 0 . 1 7 LFC,CVSC & AH 53 Mª sflax Mªe 225X225 yarko 400 YSI 01 54 I.M.S. Make UPS 1 KVA 01 55 Desktop Computer HCL Make Pro BL 1225, CD Writer Windo XP 01 56 Online APC UPS RS 1100 01 57 p s;j IykfLVd 16 58 o qMu ps;j 01 59 vkeZ dqku ps;j 07 11. MCAET Ambedkar Nagar 11.1 Group (A) Group (B) 1. Laboratory cooler motor with water pump 1 1 Budding Crafting knife 1 - - - 2. Drum Cap 200lit 1 2 Fruit catcher with pipe 1 3. Call Bell 1 3 Hedge shear 8ᶥᶥ 1 4. Stapler HP 45 2 4 Loaping shear rol cut type 1 5. Stapler 10No. 2 5 Loaping shear shearing type 1 6. Panching 0.45mm 2 6 2X6 ear Loaper 1 7. Godrej work chair 01 7 Angular Long Reach Pruner 1 8. Godrej printer work 01 8 Fruit Gatherer with pipe 1 9. Godrej INT Computer work 01 9 Pruning Saw 1 10. I.I.S.R sugar cane cutter planter 01 10 Weeding Fork 1 11. Allen key 01 set 11 Hand cultivator 1 12. Water pump plier 250 mm 01 12 Garden tool 1 13. Combination plier 200mm 01 13 Garden hoe 1 14. Bent nose plier 200mm 01 14 Dutch hoe 1 15. Chisel 02 15 Garden Rake (16 teeth) 1 16. Chiisel 02 16 Shovel 1 17. Claw hammer 450 gram 02 17 Digging Fork 1 18. Screwdriver 01 set 18 Khurpa 4 19. Nose plier 02 19 Spade 1 20. CVT 2kva 01 20 Leather Waist Belt 1 21. HP laser printer 01 21 Power tiller oprated Rice transplanter 1 22. Kamco power reaper 01 22 Till Plant Machine 4 23. Auto slide projector 01 23 P.T.Potato Planter 1 24. Display notice board 3 into 4 inch 01 24 Moister Box 50 25. A P kising letter 18,24,12mm 5 box 25 Hazara 1 26. Figure asp 18,24mm 02 box 26 Husk Sow Frame 12 27. Sony camera with accessories 01 27 Screw Driver 8/250 04 28. B.D speed drill 3 row 01 28 Screw Driver Set 2 set 29. Compaq computer 01 29 Screw Driver Tester 2 no. 30. HP laser printer 01 30 Mini Rice Mill 01 31. Photo copier machine Aficio & attachment -1-9 01 31 Nap Sak Sprayer 01 32. Old drum 01 32 Pocket Calculator 01 33. TRAINGULAR FILE 1 33 Spring Balance 03 34. FIRMER CHISEL 1 34 Steel Box 4”*2.5”*2.5” 05 35. DOVETAIL CHISEL 1 35 6 Disk Harrow 01 36. TRAINNEES CHAIR-SS-2 30 36 Working Bench 02 37. Digital Electronic Top loading balance 1 37 Stool 40 38. Laboratory Heater with Power 1 38 Dynamo Pulley 01 39. Calculater cyber desk 1 39 Pulley Small Size 01 40. PoketCalculater cyber 1 40 Pulley Big Size 01 41. Sc. Calculater cyber 3 41 D/E Spanner 04 42. Al. Box (Sample) 30D3h 42 Grease Gun Bucket 02 43. Top Pan Blance 500gm 1 43 Welding Transformer 01 44. Spring Blance 20kg 1 44 Valve Refacer 01 - - - 45. Stop Watch 1 45 Double Shoe Brake Model 01 46. Fawada 5 46 Model Internal Exoanding Shoe Brake 01 47. Box 177 X 66X 66 4 47 Model Band Brake 01 48. Sample Box Al. 10D3h 48 Model Disc Brake 01 49. Duplicater med EF112 1 49 Model Impeller Of Pump 01 50. Parshell Flume 3‟ 2 50 Model Turbine Pump 01 51. Parshell Flume 6‟ 2 51 Model Different Type Of Valve 01 52. Board 8‟X 4‟ 3 52 Model Cam Reciprocating Follower 01 53. Board 3‟X 2‟ 5 53 Model Different Type Of Seal 01 54. Parshell Flume 3‟ 2 54 Model Reciprocating Engine Mechanism 01 55. Board 2x2 13 55 Model Oscillating Cylinder Mechanism 01 56. Hot Air Oven 1 56 Model Single Plate Clutch 01 57. Pan Blance Plastic 1Kg 1 57 Model Multi Plate Clutch 01 58. Plastic Pan Blance 2Kg 1 58 Model Centrifugal Clutch 01 59. Plastic Pan Blance 4Kg 1 59 Lecture Stand 01 60. Parshall Flume 3‟‟ 2 60 Steel Lock 65mm 12 61. ParmeabilityAppratus 2set 61 Steel Lock 40mm 12 62. Core Sampler 1set 62 Godrej Lock 01 63. Core Cylinder 24 pair 63 Wooden Laboratory Bench 7inch*2.5inch 05 64. Tensiometer 2” (22.5 cm.) 10Pc 64 Wooden Table 4inch*2inch 02 65. Tensiometer 2” (30 cm.) 10Pc 65 Ring Spanner 6 -22 08 66. Tensiometer 2” (45 cm.) 10Pc 66 Spirit Level 02 67. Soil infiltometer with set 1 67 Plumb Bob 05 68. Top Pan Balance Mech. Cap-1000g 1 68 Aspa Cyno Gas Pump 01 69. Front Dial Top loading –Balance Cap 500gm 1 69 Cut Model Petrol Engine 01 70. Cooler for complet 20” 2 70 Model End Cam Reciprocating 01 71. Hot –Air Oven Hindustan 1 71 Seesham Table 6”*3”*2.5” 01 72. Bond 1‟ *1‟* 3‟ 30 72 Seesham Table 6”*2.5”*3” 01 73. Lock 65m 2 73 Lab Table 6”*2.5”*3” 10 74. Bycycleherculish ,complete 3 74 Slide Projector Etc 01 75. Lock 65 mm 2 75 Table Wooden 4”*2”*2.5” 02 76. Infrared moisture meter 152720with core cutter 1000mm dia 1 set 76 Table Wooden 4”*2”*2.5” 01 77. Shine Board 3‟ * 2‟-1, i* 1-30 31 77 Table Wooden 4”*2”*2.5” 01 78. Shine Board 2‟ * 2‟*8 -1 12 78 Steel Almirah Small 01 79. Shine Board 3‟ * 2‟ 1 79 Steel Almirah Small 1525*760*460mm 01 80. Angle board 3‟* 2‟ 3 80 Rack Wooden 02 81. Plate 1*1 15 81 Office Chair Wooden 02 82. Aspeejublee duster 1+1 82 Type Writer English 158998 01 83. Triple beam balance box type 1+1 83 Type Writer Hindi 179770 01 84. AspeeNospat sprayer 16lit 1+1 84 Steel Table 1370*760*760mm 01 85. Marutihonda compression stronger cap 3.5 lit 1 85 Steel Table 1370*760*760mm 01 86. U.S.A vivration Pan 2 86 Steel Table 1500*910*760mm 01 - - - 87. Board 1‟* 1‟* 3‟ 60 87 Steel Table 1500*910*760mm 01 88. SLR camara (Asia Painter ) 1 no 88 Steel Table 1830*220*760mm 01 89. Heating Maritles 200ml 1 no 89 Steel Chair 1. With Arm 1. Without Arm 02 90. Lab heating Plate 1 no 90 Wooden Chair With Arm 02 91. Single pan balance 2 kg 2 91 Wooden Chair With Arm 04 92. Spring balance- 20 kg 1 92 Wooden Chair With Arm 03 93. Spring balance -50 kg 1 93 Wooden Chair Teak 02 94. Screw auger 2 94 Steel Chair With Arm 01 95. Digital conductivity metre 1 95 Wooden Chair 03 96. Digital PH meter 1 96 Wooden Chair With Arm 02 97. Water still (barrasted) 1 97 Steel Almirah Big 01 98. Point gauge 7.5 CM 2 98 Steel Almirah Big 01 99. Soil hydrometer 6 99 Steel Almirah Small 01 100. Planimetre 1 100 Steel Almirah Big 01 101. Digital spectro photo meter 1 101 Steel Almirah Big 01 102. Electric sounder 100 deep 1 102 Filing Cabinet 01 103. Stopwatch 2 103 Hind Cycle 01 104. Water current metre small 2 104 Packet Calckulater(Dcm) 01 105. Water current metre medium 1 105 Rack Wooden 01 106. Pressure bomb apparatus 1 106 Wooden Glass Chair 30 107. Self propelled and row rice transplanter 1 108. Wheel hoe 2 109. B.D.Harrowpatela 2 110. B.D. multicrop planter 2 111. B.D. lugged wheel planter 2 112. Compaq desk computer 1 113. H.P. laser jet printer 1 114. Mitshubishishakt power tiller and attachment 1 115. Computer table CT - 1 2 116. Computer chair 1 117. APC -1 KVA 1 118. stop watch 2 119. Sc. calculator 1 120. Calculator official 1 121. Measuring tape 2 122. Motor 1 h.p. P.I. Phase everest 1 123. Vpulley 10” FittedBurrMipp 1 124. Vpulley 4” Fitted motor 1 125. Hot air oven hindustan 1 126. Lock harrson 1 127. Sc. calculator 1 128. Room heater 1 - - - - - - 129. Digital temperature indicator 1 130. Electronic top pan balance 1 131. Slide film projector 1 132. Stop watch 1 133. Starter I Phase 2 134. Main switch 2 135. Oil cane 1 136. Emergency Light 2 137. Display Board-4‟*5‟ 4 138. Lock Nav Tal 2 139. Torpoulin 1 140. Desk Calculator 1 141. Typewriter English 1 142. Plier-8” 1 143. DPR Daff Mill with Motor 1 144. Lock 1 145. Lock (Godrej) 1 146. Combination Plier 1 147. Pipe Wrench-12” 1 148. Screw Driver-934 1 149. Screw Driver-824 1 150. Hack Saw Frame 1 151. Wooden Rasp File 1 152. Drill Machine 1 153. Drill bit Set 1set 154. Scale 2 155. Tap 3M 2 156. Adjustable Wrench 1 157. File square 1 158. File half round 1 159. Hand saw -450mm 1 160. Hand saw -350mm 1 161. Gim pet 1 162. Container 1 163. Imerson rod 1 164. Bhagona 3 165. Kalchul 2 166. Palta 1 167. Parat 1 168. Calculator 10 digit 1 169. Spark regulator for above fillar cabinet sndicator Card and plug 1 170. Nozzeltoslav cap1 lit 1 171. Tripal 7/4 1 172. Tripal7*4 1 173. Portable moning AC voltmeter 20 174. ATCO balance with platform 1 175. Kirbskar motor 7.5 k 10 H.P 1 176. L&T make starter delta rang 6-10 AMP 1 177. Orpet calculator 1 178. Tripal 6*5 squ yard 1 179. Cello tax board a* 2.5 2 180. Sanye LCD Multiprojector model -PLC 2 181. Exhubit Panel with acrylic 120 60 RD-117- 11 1 182. Plastic Body Front Top Balance cap-1Kg 5 183. Plastic Body Front Top Balance cap-1Kg 5 184. Dari Parsi12‟*12‟ 12*15‟ 2 185. Voltage stabilizer 3 kw ----- 186. Kangaroo Heavy duty Stapler ----- 187. Electric Hot Air Oven 01 188. National Power triller attachment 01 189. Tamilnadu conveyor reaper 01 190. Cage wheel 02 191. Scientific calculator DCM 01 192. Hand shearing machine 01 193. Grass cutter 01 194. Mitsubishi power triller attachment 01 195. Thressur with fan 5 HP 01 196. Disc Harrow 8 disc 01 197. Triple beam balance 300 gm 01 198. Triple beam balance 111 gm 01 199. Physical weigh box made from Beam 01 200. Kisan paddy thresher 01 201. Box size 3 * 1.5 *1 inch 01 202. Lock 01 203. Stopwatch 01 204. Hazara 01 205. Hydraulic dynamometer 01 206. Ground Net potato digger 01 207. Temperature indicator 01 208. Temperature probe 02 209. General probe 01 210. KAMCO Power tiller with attachment 01 211. Power tiller auger 01 212. Tall tree duster 01 213. Potato planter 3 row 01 214. Power triller tech book 01 215. Hi tech frame 01 216. Lugged Wheel 02 217. Tail wheel 01 218. Mitsubishi Shakti Power triller 01 219. Calcuater cyber 02 220. Socket set gedor 1 Set 221. Long nose plier 02 222. Side cutting plier 01 223. Socket 10,20,22,24 mm 4 Pc. 224. Night duty drill welf 13mm 01 - - - - - - 225. Angle grinder attachment 01 226. Energy metre 01 227. Vane Shear Apparatus 01 228. Stand MB 343 01 229. I.I.S.R Sett Cutting Machine 01 230. BD sugarcane planter 01 231. G -1 Bin 5Qt &1Qt 2 232. Desk Calculator 1 233. Load Ceff (0 -500kgl) 1 234. Load Ceff (0 -2500kgl) 1 235. Load Ceff indicator 1 236. Knap Sake Sprayer -16 lit 1 237. Gas Analyser Apparatus 1 238. P.T. Repeater 1.6 M 1 239. S - S -column Porapack 1 240. S - S - column Modicular 1 241. Gas sampling syringe 1 242. 8 Row paddy Transplanter 1 243. Oxygen Analyser 1 244. P.T. Axial flow pump 1 245. 6 Row Rice Transplanter 1 246. Stop Watch 1 247. Electronic Top Pan Balance 1 248. Rechargable Battery 1 249. Air Shield Case 1 250. Yorco Hot Air Oven 1 251. Nozzel Tester 1 252. Mechanical Jack 5Ton 1 253. Reamer Set-15 Pc. 1set 254. Steel Scale 30cm 2 255. SARACHI Power Trillerchinease with attachment 1 256. Flexible shaft 5/8 11 x 3 M 1 257. P.T Potato Planter 1 258. Digital Pulse Monitor 1 259. Motor Cycle bajaj Kawasaki 1 260. D.E. Spanner Set 1 set 261. Ring Spanner Set 1 set 262. Pipe Wrench 1 263. Socket S etc
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 5
Uttar Pradesh View Result →
5.
Petroleum and Natural Gas #8436902 AOC
Annual Rate Contract For Civil And Other Miscellaneous Maintenance Works At Wrpl Beawar And Sendra Station=10 NRECIV0001: Cleaning mosaic floor with Carborundum block stone, oxalic acid and caustic soda for all heights of all patches, spots a nd polishing with Mansion polish with all tools, tackles, consumables, materials & labour all complete. 20 NRECIV0002: Through cleaning of paved and unpaved areas, roads, road side berms, broming removal of scraps and other unwanted left o ver materials including removal of chockage in the drains, removal of chockage from the road side / pave or unpaved area side drains and disposal of the rubbish etc. to the nearest garbage bin or as directly by Engineer-in-charge including laboures, broom, trolley and other consumables etc.complete. 30 NRECIV0003: Cleaning the tiles, lavatory, flooring, urinals etc. by removing stains etc. by using Vim powder / cleaning powder / ISI grade black phenyle / while phenyle / Acid /Naptha balls / Coir brushes / wire brushes / Finit in required proportion to make the a rea clean and free from all dust, dirt and stains etc. including cost of all labour and materials complete. (Only floor area shall b e measured). 40 NRECIV0004: Mopping of floors of offices, toilets, control rooms, electrical sub station etc. with soap solution or phenyle water wi th wet cloth after sweeping the floor with phooll broom, removing cob-webs with all tools, tackles, labour & materials etc. complete as per directions of Engineer -in-charge including cleaning of ventilator glass panes from both the sides upto any height with clea ning powder,paint remover as per requirement all labour, material etc.complete. 50 NRECIV0005: Carrying out miscellaneous activities related to general maintenance like daily dusting the furnitures, walls shelves, c leaning the carpets, sofas, Cleaning and sweeping the stair case, passages, backyard, verandah, garrages, removal of cow webs, with all labours, tools & tackles complete including supervising charges. (Unit EA shall mean carrying out above activities for 8 hrs. a day). 60 NRECIV0006: Removing stains, paints, washing & cleaning the window & ventilator glass panes from both the sides upto any height with cleaning powder, paint remover as per requirement all labour, materials etc. complete.: Glass pane not exceeding 1.00 sq.m in area 70 NRECIV0007: Removing stains, paints, washing & cleaning the window & ventilator glass panes from both the sides upto any height with cleaning powder, paint remover as per requirement all labour, materials etc. complete.: Glass pane exceeding 1.00 sq.m in area 80 NRECIV0008: Collection of Kitchen waste, dry waste & toxic waste in offices and colony from all Residential & Public Buildings, Exec utive Hostel, Staff Hostel, Canteen, Guest House, Club etc. The workmen shall collect the waste from each house & Public Buildings, segregate the waste into biodegradable & non bio-degradeable waste and finally dispose themseparately at designated place (Dumping Yard/ Pit) on daily basis as per requirement, with trained workmen, with all labour, tools, tackles, safety & protective clothes etc . complete as per direction of Engineer-in-charge. All consumables required including manpower, tools & tackles, PPEs, uniform to wo rkmen, etc. are to be supplied by Contractor without any extra cost and performing work as per item decription and direction of Engi neer-in-Charge as well as instructions in Special Condition of Contract if any. Payment of Paddle Rickshaw (thela) will be made sepe rately. The unit MONTH (MON) shall mean per house/building per month 90 NRECIV0009: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain upto 2.0 sqm. 100 NRECIV0010: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain above 2.0 sqm. and upto 4.0 sqm. 110 NRECIV0011: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain above 4.0 sqm. and upto 10.0 sqm. 120 NRECIV0012: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain above 10.0 sqm and upto 15.0 sqm. 130 NRECIV0013: Labour charges for cleaning and dechoking of the nahani trap, gully trap and inspection chambers alongwith the CI and S W pipe connection of house drainage including flushing, removal of sludge muck outside all labour, tools etc. complete. The contract or has to clean the line from Nahani trap upto inspection chamber or vice-versa complete. 140 NRECIV0014: Cleaning and removing choking from existing rain water pipe including removing the shoe or grating if necessary & fixin g the same without damaging & fitting of specials all labour etc.complete. Up to 5 mtr. Height 150 NRECIV0015: Cleaning of manholes and removal of chokage in sanitary sewer or CRWS manholes and its allied connection by rodding, st eaming, watering manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Cha rge including plugging and dewatering of manholes removal of muck, sludge, floating materials etc. and disposing, the same to dumping pi t within owners premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, ho ses, operative labour etc. complete.: Manholes of depth upto 2.0 M 160 NRECIV0016: Cleaning of manholes and removal of chokage in sanitary sewer or CRWS manholes and its allied connection by rodding, st eaming, watering manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Cha rge including plugging and dewatering of manholes removal of muck, sludge, floating materials etc. and disposing, the same to dumping pi t within owners premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, ho ses, operative labour etc. complete.: Manholes of depth beyond 2.0 M but upto 3.0M 170 NRECIV0017: Cleaning of manholes and removal of chokage in sanitary sewer or CRWS manholes and its allied connection by rodding, st eaming, watering manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Cha rge including plugging and dewatering of manholes removal of muck, sludge, floating materials etc. and disposing, the same to dumping pi t within owners premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, ho ses, operative labour etc. complete.: Manholes of depth beyond 3.0M 180 NRECIV0018: Cleaning of manholes and removal of chokage in OWS manholes and its allied connection by rodding, steaming, watering man ually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including pluggi ng and dewatering of manholes, removal of muck, sludge, floating materials etc. and disposing, the same to dumping pit within owner s premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, operative labour etc. complete.: Manholes of depth upto 2.0 M 190 NRECIV0019: Cleaning of manholes and removal of chokage in OWS manholes and its allied connection by rodding, steaming, watering man ually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including pluggi ng and dewatering of manholes, removal of muck, sludge, floating materials etc. and disposing, the same to dumping pit within owner s premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, operative labour etc. complete.: Manholes of depth beyond 2.0 M but upto 3.0M 200 NRECIV0020: Cleaning of manholes and removal of chokage in OWS manholes and its allied connection by rodding, steaming, watering man ually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including pluggi ng and dewatering of manholes, removal of muck, sludge, floating materials etc. and disposing, the same to dumping pit within owner s premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, operative labour etc. complete.: Manholes of depth beyond 3.0M 210 NRECIV0021: Cleaning dechoking and flushing inspection chambers and connected drain lines with drain cleaning rods, bamboos, compres sed air, steaming etc. removal of oily muck outside the chamber completed upto 100M lead. The item includes transportation of all ma chinery and plants, all labour, tools etc. complete, taking all necessary safety precautions as specified. Water at one point shall be supplied free of cost, hire charges for compressed air shall be paid separately if required. 220 NRECIV0022: Cleaning, dechoking and flushing 100mm/ 50mm SW and sewer line by removing muck, cleaning etc. with bamboo strips or sew er cleaning rods etc. as directed (section between two chambers) all complete including cleaning of two manholes as per direction of the Engineer-in-Charge. 230 NRECIV0025: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by mechanically driven transport for following leads or part thereof including loading, unloadin g and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction o f 20 percent for voids): Upto a lead of 1 km 240 NRECIV0026: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by mechanically driven transport for following leads or part thereof including loading, unloadin g and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction o f 20 percent for voids): Lead beyond 1 km but upto 2 km 250 NRECIV0027: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by mechanically driven transport for following leads or part thereof including loading, unloadin g and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction o f 20 percent for voids): Lead beyond 2 km but upto 3 km 260 NRECIV0028: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by manual labor / manually driven transport for following leads or part thereof including loadin g, unloading and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction of 20 percent for voids): Upto a lead of 50 m. 270 NRECIV0029: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by manual labor / manually driven transport for following leads or part thereof including loadin g, unloading and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction of 20 percent for voids): Every additional leads of 50 m or part thereof beyond 1st 50 m upto 9 such additional leads. 280 NRECIV0030: Supply of tractor with trailer on hire charges for 08 hours per day including rendering the services of 4 labourers driv er, fuel and other consumables, tools, tackles etc. for transportation of rubbish/ waste materials complete as per directions of Eng ineer-in-Charge.(8 hours working period of one tractor is considered as one tractor day). Unit EACH (EA) stands for tractor days. 290 NRECIV0031: Edging with common burnt clay F.P.S. (non modular) bricks of class designation 7.5, laid dry length wise, including requ ired excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50m. 300 NRECIV0038: Providing comprehensive pest control services to the building, sheds, cable trenches, drains and other facilities of th e establishment, to control the nuisance of various pests including (but not limited to) rodents, snakes, lizards, beehives, cockroa ches, mosquitoes, Red and Black ants, crawling pests, house flies, fruit flies, etc. Job includes placing / injecting rodenticide ba its, glue trays, snake repellent and other chemicals, insecticides, Fogging/fumigation, Removal of bee hives below ground (in trench es upto depth of 1m) and above ground (up to height of 15m), complete with all labours, materials, tools, and tackles, equipments, c onsumables etc complete. Periodicity of scheduled pest control activities shall be monthly, while ad hoc requirement shall be as and when required as directed by EIC whose decision shall be final. Area of measurement for pest control application shall be designate d by EIC. Rate is For (PER SQM PER MONTH) 310 NRECIV0039: Lifting, shifting, loading, unloading on of heavy equipment / material etc etc with the help of hydra/crane etc (Min 12T ) including all accessories like belt, sling etc as per directions of EIC/ Site- Engineer. (Unit EA shall mean carrying out abov e activities for 8 hrs. a day). 320 NRECIV0040: Hire and running charges of loader. (Unit EA shall mean carrying out above activities for 8 hrs. a day). 330 PJEALU2634: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubul ar sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM ru bber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever require d including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per arc hitectural drawings and the directions of the Engineer-in-Charge. [Note: Glazing, paneling and dash fasteners to be paid for separat ely] : 340 PJEALU2636: Anodised Aluminium (Anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of Grade AC-15) 350 PJEALU2637: Powder coated aluminium (Minimum thickness of powder coating 50 micron) 360 PJEALU2638: Polyester powder coated aluminium (Minimum thickness of polyester powder coating 50 micron) 370 PJEALU2639: For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixi ng of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required. [Note: Fittings shall be paid for sepa rately] : 380 PJEALU2640: Anodised Aluminium (Anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of Grade AC-15) 390 PJEALU2641: Powder coated aluminium (Minimum thickness of powder coating 50 micron) 400 PJEALU2642: Polyester powder coated aluminium (Minimum thickness of polyester powder coating 50 micron) 410 PJEALU2650: Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS:6315, havin g brand logo embossed on the body/ plate with double spring mechanism and door weight up to 125 Kg, for doors, including cost of cut ting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per directions of the Engineer-in-Charge. : 420 PJEALU2651: With stainless steel cover plate minimum 1.25 mm thickness 430 PJEALU2652: With brass cover plate minimum 1.25 mm thickness 440 PJEALU2685: Filling the gap in between Aluminium/ Stone/ Wood frame and adjacent RCC/ Brick/ Stone/ Wood/ Ceramic/ Gypsum work by pr oviding weather/ structural non-sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and dir ections of the Engineer-in-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 : 450 PJEALU2686: Up to 5 mm depth and 5 mm width 460 PJEALU2687: Up to 10 mm depth and 10 mm width 470 PJEALU2688: Up to 20 mm depth and 20 mm width 480 PJEALU2689: Providing and fixing, on fixed glazing/ doors/ window panes, sun control film HP NATURAL 35 SAFETY COMBINATION FILM-4Mi l of M/s. GARWARE or approved equivalent make and shade, all complete as per manufacturers specification and as per directions of the Engineer-in-Charge. 490 PJECLA0192: Marble work gang saw cut (polished and machine cut) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marb le of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 ceme nt : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment t o match the marble shade [Note: To be secured to the backing by means of cramps, which shall be paid for separately] : 500 PJECLA0193: Area of slab up to 0.50 sqm 510 PJECLA0194: Area of slab over 0.50 sqm 520 PJECLA0195: Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble for kitchen platforms, vanity counters, window sills, facias and similar loca tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels : 530 PJECLA0196: Area of slab up to 0.50 sqm 540 PJECLA0197: Area of slab over 0.50 sqm 550 PJECLA0198: Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone sl ab of colour black, Cherry/Ruby red for kitchen platforms, vanity counters, window sills, facias and similar locations of required s ize, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with जोधर्पुर matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels : 560 PJECLA0199: Area of slab up to 0.50 sqm 570 PJECLA0200: Area of slab over 0.50 sqm 580 PJECLA0201: Providing edge moulding to 18 mm thick Marble/ Granite stone counters, Vanities etc., including machine polishing to edg e to give high gloss finish etc. complete as per design approved by the Engineer-in-Charge : 590 PJECLA0202: Marble work 600 PJECLA0203: Granite work 610 PJECLA0206: Mirror polishing on Marble work/ Granite work/ Stone work wherever required to give high gloss finish complete. 620 PJECLA0220: Providing and fixing machine cut, mirror/ eggshell polished Italian Marble stone slab (Perlato, Rosso verona, Fire Red o r Dark Emperadore etc.) of 18 mm thickness for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 c ement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 Kg/sq.m. including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directe d by the Engineer-in-Charge : 630 PJECLA0221: Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional h eight of 3 m or part thereof. 640 PJECLA0222: TILE WORK IN CLADDING : 650 PJECLA0223: Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the ma nufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-i n-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete. 660 PJECON0069: CEMENT CONCRETE (CAST IN-SITU) : 670 PJECON0070: Providing and laying in position cement concrete of specified grade at all depths including ramming & shuttering etc. c omplete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directio n of Site Engineer: 680 PJECON0071: 1:1.5:3 [1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal siz e derived from natural sources] 690 PJECON0072: 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources] 700 PJECON0074: 1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size de rived from natural sources] 710 PJECON0078: Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 [1 cement : 2 coarse sand (Zone-III) deriv ed from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources] laid to proper level & line incl uding providing shuttering & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 Kg per sq uare metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications a nd direction of Site Engineer. 720 PJECON0080: Making plinth protection 50 mm thick of cement concrete 1:3:6 [1 cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources] over 75 mm thick bed of dry brick ballast 40 mm nominal siz e, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specificatio ns and directions of the Engineer-in-Charge. 730 PJECON0082: Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manuf acturers specification. [Note: Unit KG shall mean PER BAG OF 50 KG OF CEMENT]. 740 PJECON0085: Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centerin g, shuttering and finishing: 1:1.5:3 [1 cement: 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 2 0 mm nominal size derived from natural sources] 750 PJECON0087: Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, ancho r blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mort ar 1:3 (1 cement : 3 coarse sand), cost of required centering complete: 1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources] 760 PJECON0088: Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete : 1:1.5:3 [1 cement: 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources] 770 PJEDIS1159: Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per th e directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same s hall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations] : 780 PJEDIS1160: Nominal concrete 1:3:6 or richer mix (including equivalent design mix) 790 PJEDIS1161: Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) 800 PJEDIS1162: Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable mat erial within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift o nly & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be d one prior to dismantling operations. (3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge] 810 PJEDIS1163: Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable mate rial within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of n ecessary covers/ barricades around the work area shall be done prior to dismantling operations] 820 PJEDIS1164: Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work as per direction of the Engine er-in-Charge. [Notes: (1) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by th e Engineer-in-Charge. (2) Payment shall be made on the cross sectional area of R.C.C. or R.B. work] 830 PJEDIS1165: Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. 840 PJEDIS1166: Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and d isposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall b e allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades aro und the work area shall be done prior to dismantling operations] 850 PJEDIS1168: Demolishing stone rubble masonry in cement mortar manually/ by mechanical means including stacking of serviceable materi al and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. 860 PJEDIS1171: Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc . complete and stacking within 50 metres lead : 870 PJEDIS1172: Of area 3.0 sq. metres and below 880 PJEDIS1173: Of area beyond 3.0 sq. metres 890 PJEDIS1177: Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in : 900 PJEDIS1178: Rolled Steel Joists 910 PJEDIS1179: Channels, angles, tees and flats 920 PJEDIS1181: Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 me tres lead as per direction of Engineer-in-charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantlin g operations. (3) Cutting of steel shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge .] 930 PJEDIS1185: Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead : 940 PJEDIS1186: For thickness of tiles 10 mm to 25 mm 950 PJEDIS1187: For thickness of tiles above 25 mm and up to 40 mm 960 PJEDIS1188: Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material and disposal of unservicea ble material within 50 metres lead. 970 PJEDIS1190: Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable ma terial within 50 metres lead. 980 PJEDIS1191: Demolishing mud phaska in terracing and disposal of material within 50 metres lead. 990 PJEDIS1192: Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of : 1000 PJEDIS1193: G.S. Sheet 1010 PJEDIS1194: Asbestos Sheet 1020 PJEDIS1198: Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. 1030 PJEDIS1200: Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead : 1040 PJEDIS1201: Thickness up to 40 mm 1050 PJEDIS1202: Thickness above 40 mm up to 75 mm 1060 PJEDIS1204: Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres l ead : 1070 PJEDIS1205: 75 to 80 mm dia pipe 1080 PJEDIS1206: 100 mm dia pipe 1090 PJEDIS1207: 150 mm dia pipe 1100 PJEDIS1208: Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable mater ial within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift onl y & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be don e prior to dismantling operations.(3) Adequate safety precautions shall also be taken care before commencement of any activity] : 1110 PJEDIS1209: Water Bound Macadam Road 1120 PJEDIS1210: Bituminous Road 1130 PJEDIS1211: Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per the directions of Engineer-in-Charge : 1140 PJEDIS1212: 15 mm to 40 mm nominal bore 1150 PJEDIS1213: Above 40 mm nominal bore 1160 PJEDIS1214: Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical m eans breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per the directions of Engineer-in-Charge : 1170 PJEDIS1215: Up to 150 mm diameter 1180 PJEDIS1216: Above 150 mm dia up to 300 mm dia 1190 PJEDIS1217: Above 300 mm diameter 1200 PJEDIS1221: Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manual ly/ by mechanical means and stacking the pipes within 50 metres lead as per the directions of Engineer-in-Charge : 1210 PJEDIS1222: Up to 150 mm diameter 1220 PJEDIS1223: Above 150 mm diameter 1230 PJEDIS1224: Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metre s lead as per the directions of Engineer-in-Charge. 1240 PJEDIS1228: Dismantling of flushing cistern of all types (C.I./ PVC/ Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 1250 PJEDIS1232: Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. 1260 PJEDIS1233: Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 1270 PJEDIS1234: Dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unservic eable surplus material and stacking of serviceable material with in 50 meters lead as directed by the Engineer-in-Charge. 1280 PJEDIS1237: Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by the Engineer-in-Charge, beyond 50 m initial lead, for all leads including all lifts involved. 1290 PJEDRA2505: Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 Kg 1300 PJEDRA2506: Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality : 1310 PJEDRA2507: Light Duty-2.5 : 1320 PJEDRA2508: Rectangular shape 600x450 mm internal dimensions 1330 PJEDRA2509: Square shape 450 mm internal dimensions 1340 PJEDRA2510: Circular shape 450 mm internal diameter 1350 PJEDRA2511: Medium Duty-10 : 1360 PJEDRA2512: Square shape 450 mm internal dimensions 1370 PJEDRA2513: Circular shape 500 mm internal diameter 1380 PJEDRA2514: Heavy Duty-20 : 1390 PJEDRA2515: Circular shape 560 mm internal diameter 1400 PJEDRA2516: Extra Heavy Duty-35 : 1410 PJEDRA2517: Circular shape 560 mm internal diameter 1420 PJEDRA2518: Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both si des with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels fo r the drain etc. complete : 1430 PJEDRA2519: For pipes 100 to 250 mm diameter 1440 PJEDRA2520: For pipes 250 to 300 mm diameter 1450 PJEDRA2521: For pipes 350 to 450 mm diameter 1460 PJEDRA2550: Providing and fixing self cleaning S.C.I. heavy quality Floor/ Nahani trap with 100mm diameter inlet and 100mm diameter outlet, 125mm C.P. brass grating (heavy type) with or without vent arm including cost of cutting and making good the walls and floor s, jointing with lead caulked joints, connecting with waste water pipe etc. complete in all respects inclusive of cost of all materi als, labour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. 1470 PJEDRA2551: Providing and fixing 32mm diameter (Nominal Bore) brass ball valve of approved quality complete with high pressure coppe r floats, complete in all respects inclusive of cost of all materials, labour, tools, tackles, etc. complete as per specifications a nd directions of the Engineer-in-Charge. 1480 PJEDRA2553: Construction of second class brick masonary open surface drain (Size: 200mm wide & 200mm average depth) in cement mortar 1:4 laid over a bed of 150mm thick cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) i ncluding making haunches and providing 15mm thick cement plaster in CM 1:4 (1 cement : 4 coarse sand) with a floating coat of neat c ement inside and its top and exposed surfaces, including excavatioin, disposal of the surplus earth up to any lead and lift as per s tandard design and drawing, complete in all respects inclusive of cost of all labour, materials, carriages, excavation and refilling , curing etc., as per specifications and directions of the Engineer-in-Charge. 1490 PJEDRA2588: Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. [Note: Unit KL shall mean KILO LITRE] 1500 PJEDRA2589: Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, a ll as per the directions of Engineer-in-Charge. 1510 PJEDRA2590: Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting s ewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including ski lled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking an d flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia up t o 300 mm dia for all depth. 1520 PJEEAR0002: Earth work in surface excavation (not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan) i n all kinds of soil including getting out and disposal of excavated earth up to all lead and lift, as directed by the Engineer-in-Ch arge. 1530 PJEEAR0004: Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas including trimming of sides of the trenches, dressing, ramming and levelling the bottom of the trenches correct to level, grade etc. including filling in sid es of foundation trenches, plinth etc. with the excavated earth available and/or depositing the excess earth within station area l imits, in layers not exceeding 20 cms. thick, consolidating each deposited layer by ramming, watering, dressing to level and grade , complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direc tion of Site Engineer. 1540 PJEEAR0005: In all kinds of soil 1550 PJEEAR0006: In Ordinary rock 1560 PJEEAR0009: Supplying and filling selected earth/ moorum (excluding black cotton soil) from Contractors own borrow areas including royalty, with all leads and lifts in trenches, plinth, sides of foundation etc. including watering, compacting in layers not exceed ing 20cm thickness, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specif ications and direction of Site Engineer. 1570 PJEEAR0011: Supplying and filling coarse sand under floors, in foundations and plinth including cost-of sand, royalty, transportatio n, loading , unloading, spreading in layers not exceeding 20 cm., watering, ramming, compacting, dressing and levelling etc. compl ete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. 1580 PJEEAR0013: Supplying all labour, materials, tools, chemicals, spray pumps etc. for making pre-constructional anti-termite treatment & creating a continuous chemical barrier under & all round the column pits, wall trenches, top surface of plinth filling, junction of wall & floor, along the exterior perimeter of the building, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. [Note: Total plinth area of the building shall be measured for payment]. 1590 PJEEAR0014: Supplying chemical emulsion (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) in sealed containers including deli very as specified. 1600 PJEEAR0015: Diluting and injecting chemical emulsion (Chlorpyriphos/ Lindane E.C. 20% with 1% concentration) for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 1610 PJEEAR0016: Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres/ sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete : 1620 PJEEAR0017: Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. : 1630 PJEEAR0020: Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based soluti on) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same : 1640 PJEEAR0021: Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measu red at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 1650 PJEEAR0022: Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 1660 PJEEAR0023: Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, r emoving the roots and stacking of serviceable material and disposal of unserviceable material : 1670 PJEEAR0024: Beyond 30 cm girth upto and including 60 cm girth 1680 PJEEAR0025: Beyond 60 cm girth upto and including 120 cm girth 1690 PJEEAR0026: Beyond 120 cm girth upto and including 240 cm girth 1700 PJEEAR0027: Above 240 cm girth 1710 PJEEAR0028: Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to designated location/ approved municiple dumping ground for lead up to 10 Km and for a ll lifts, complete as per directions of the Engineer-in-Charge. [Note: This item shall also be applicable in urban areas having dire ctions for restricted hours for movement/ plying of load carrying motor vehicles of 3.5 cum or more.] 1720 PJEEAR0030: Excavating trenches by mechinical / manual means of required width in all kinds of soil for pipes, cables, etc. includin g excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and th en returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil, all work up to any lead & lift as directed by the Engineer-in-Charge : 1730 PJEEAR0031: Pipes, cables etc. not exceeding 80 mm dia. 1740 PJEEAR0032: Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia 1750 PJEEAR0033: Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm 1760 PJEEAR0034: Excavating trenches of required width in ordinary rock for pipes, cables, etc. including excavation for sockets, getting out the excavated materials, returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. , stacking servicable materials for measurements and disposal of unservicable materials, all work up to any lead & lift as directed by the Engineer-in-Charge : 1770 PJEEAR0035: Trench depth upto 1.5m : 1780 PJEEAR0036: Pipes, cables etc. not exceeding 80 mm dia 1790 PJEEAR0037: Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia 1800 PJEEAR0038: Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia 1810 PJEEAR0039: Trench depth exceeding 1.5 m but not exceeding 3 m: 1820 PJEEAR0040: Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia 1830 PJEEAR0041: Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia 1840 PJEEAR0042: Trench depth exceeding 3 m but not exceeding 4.5 m: 1850 PJEEAR0043: Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia 1860 PJEEAR0066: Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceedin g 20 cm in depth, consolidating each deposited layer by ramming and watering, all works up to any lead and lift 1870 PJEFIN0898: CEMENT PLASTER (IN FINE SAND) : 1880 PJEFIN0899: 12 mm cement plaster of mix : 1890 PJEFIN0900: 1:4 (1 cement : 4 fine sand) 1900 PJEFIN0901: 1:6 (1 cement : 6 fine sand) 1910 PJEFIN0905: 20 mm cement plaster of mix : 1920 PJEFIN0906: 1:4 (1 cement : 4 fine sand) 1930 PJEFIN0907: 1:6 (1 cement : 6 fine sand) 1940 PJEFIN0908: CEMENT PLASTER (IN COARSE SAND) : 1950 PJEFIN0909: 12 mm cement plaster of mix : 1960 PJEFIN0910: 1:4 (1 cement : 4 coarse sand) 1970 PJEFIN0911: 1:6 (1 cement : 6 coarse sand) 1980 PJEFIN0915: 20 mm cement plaster of mix : 1990 PJEFIN0916: 1:4 (1 cement : 4 coarse sand) 2000 PJEFIN0917: 1:6 (1 cement : 6 coarse sand) 2010 PJEFIN0918: CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 2020 PJEFIN0919: 12 mm cement plaster finished with a floating coat of neat cement of mix : 2030 PJEFIN0920: 1:3 (1 cement : 3 fine sand) 2040 PJEFIN0921: 1:4 (1 cement : 4 fine sand) 2050 PJEFIN0925: Cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement : 2060 PJEFIN0926: 12 mm cement plaster 2070 PJEFIN0927: 20 mm cement plaster 2080 PJEFIN0942: Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufactu rers [Note: Unit BAG shall mean PER BAG OF 50 KG CEMENT USED IN THE MIX). 2090 PJEFIN0943: Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or par t thereof. 2100 PJEFIN0944: Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and s mooth complete. 2110 PJEFIN0945: Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Colum ns/ Beams brickwork as directed by the Engineer-in-Charge. 2120 PJEFIN0963: Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved ma nufacturer and of required shade and colour all complete to achieve even shade and colour :New work (two or more coats) over and inc luding water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 2130 PJEFIN0964: EXTERIOR FINISHING : 2140 PJEFIN0965: Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 Kg/10 sq m) 2150 PJEFIN0966: Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 2160 PJEFIN0967: Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9 kg/10 sqm) 2170 PJEFIN0968: Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9 kg/10 sqm) 2180 PJEFIN0969: Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifica tions : 2190 PJEFIN0970: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm 2200 PJEFIN0971: Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture. 2210 PJEFIN0972: Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm ov er an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. 2220 PJEFIN0973: Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon ad ditives: New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. 2230 PJEFIN0974: Applying priming coat : 2240 PJEFIN0975: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood 2250 PJEFIN0976: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 2260 PJEFIN0977: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) 2270 PJEFIN0978: Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specification s including appropriate priming coat, preparation of surface, etc. complete : 2280 PJEFIN0979: On steel work 2290 PJEFIN0980: On concrete work 2300 PJEFIN0981: Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work : 2310 PJEFIN0982: 75 mm diameter pipes 2320 PJEFIN0983: 100 mm diameter pipes 2330 PJEFIN0984: 150 mm diameter pipes 2340 PJEFIN0985: Painting with oil type wood preservative of approved brand and manufacture : New work (two or more coats) 2350 PJEFIN0986: Providing and applying two coats of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat inclu ding preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. 2360 PJEFIN0987: Coal tarring two coats on new work using 0.16 Litre and 0.12 Litre coal tar per sqm in the first coat and second coat re spectively. 2370 PJEFIN0988: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 2380 PJEFIN0989: Painting with aluminium paint of approved brand and manufacture to give an even shade : Two or more coats on new work 2390 PJEFIN0990: Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : Two or mor e coats on new work 2400 PJEFIN0991: Varnishing with varnish of approved brand and manufacture : 2410 PJEFIN0992: Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish 2420 PJEFIN0993: Two or more coats glue sizing with spar varnish or an under coat of flatting varnish 2430 PJEFIN0996: Lettering with black Japan paint of approved brand and manufacture. [Note: Unit EA shall mean PER LETTER PER CM HEIGH T]. 2440 PJEFIN0997: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2450 PJEFIN0998: Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litr e, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour : Old work (one or more coats) 2460 PJEFIN0999: Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour : 2470 PJEFIN1000: One coat 2480 PJEFIN1001: Two coats 2490 PJEFIN1002: Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour : 2500 PJEFIN1003: One coat 2510 PJEFIN1004: Two coats 2520 PJEFIN1005: Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content : 2530 PJEFIN1006: With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. 2540 PJEFIN1007: With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre. 2550 PJEFIN1008: Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repair s to scratches etc. complete. 2560 PJEFIN1009: Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 2570 PJEFIN1010: Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 2580 PJEFIN1011: 75 mm diameter pipes 2590 PJEFIN1012: 100 mm diameter pipes 2600 PJEFIN1013: 150 mm diameter pipes 2610 PJEFIN1014: Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of appro ved brand and manufacture and required colour on old work : 2620 PJEFIN1015: 75 mm diameter pipes 2630 PJEFIN1016: 100 mm diameter pipes 2640 PJEFIN1017: 150 mm diameter pipes 2650 PJEFIN1018: Painting with oil type wood preservative of approved brand and manufacture : Old work (one or more coats) 2660 PJEFIN1019: Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work 2670 PJEFIN1020: Painting with aluminium paint of approved brand and manufacture to give an even shade : One or more coats on old work 2680 PJEFIN1021: Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : One or mor e coats on old work 2690 PJEFIN1022: French spirit polishing : One or more coats on old work 2700 PJEFIN1023: Polishing on wood work with ready made wax polish of approved brand and manufacture : Old work 2710 PJEFIN1024: Re-lettering with black Japan paint of approved brand and manufacture. [Note: Unit EA shall mean PER LETTER PER CM HE IGHT]. 2720 PJEFIN1025: Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. 2730 PJEFIN1026: Finishing walls with water proofing cement paint of required shade : 2740 PJEFIN1027: Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete i ncluding cost of Priming coat. 2750 PJEFIN1028: Old work (one or more coats applied @ 2.20 kg/10 sqm) complete. 2760 PJEFIN1029: Finishing walls with textured exterior paint of required shade 2770 PJEFIN1030: Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. 2780 PJEFIN1031: Old work (One or more coats) applied @ 1.82 ltr/10 sqm. 2790 PJEFIN1032: Finishing walls with Acrylic Smooth exterior paint of required shade : 2800 PJEFIN1033: Old work (Two or more coat applied @ 1.67 ltr/10 sqm) on existing cement paint surface. 2810 PJEFIN1034: Old work (One or more coat applied @ 0.90 ltr/10 sqm) 2820 PJEFIN1035: Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : 2830 PJEFIN1036: Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. 2840 PJEFIN1037: Old work (one or more coats applied @ 0.83 ltr/10 sqm) 2850 PJEFIN1038: Varnishing with varnish of approved brand and manufacture : 2860 PJEFIN1039: One or more coats with copal varnish 2870 PJEFIN1040: One or more coats with spar varnish 2880 PJEFIN1041: Melamine polishing on wood work (one or more coat). 2890 PJEFIN1042: Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. 2900 PJEFIN1043: Providing Plaster of Paris coating on ceiling as per approved design complete in all respects inclusive of cost of all l abour, materials, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. 2910 PJEFLO0706: FLOORING : 2920 PJEFLO0707: Brick on edge flooring with bricks of class designation 7.5 on bed of 12 mm cement mortar, including filling the joint s with same mortar, with common burnt clay non modular bricks : 2930 PJEFLO0708: 1:4 (1 cement : 4 coarse sand) 2940 PJEFLO0709: 1:6 (1 cement : 6 coarse sand) 2950 PJEFLO0710: Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, includ ing filling joints with sand, with common burnt clay non modular bricks. 2960 PJEFLO0711: Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class desig nation 50 laid to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. 2970 PJEFLO0712: Providing and laying cement concrete flooring 25 mm thick of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggreg ates 12.5 mm nominal thickness), laid monolithically over base of concrete in panels at all locations and heights including treads o f steps, nosing, landing slab etc. and finished with a floating coat of neat cement @ 2.20 Kg of cement per sqm of flooring, supplyi ng and fixing 1.5 mm thick aluminium strips for full depth, chequering in floor finish if required, rounding, sloping, curing, finis hing, preparation of slab, steps, etc., complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. [Note: Payment for base concrete shall be made under relevant item]. 2980 PJEFLO0713: 40 mm thick cement concrete Flooring with P.C.C. of grade mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of step s etc. complete : 2990 PJEFLO0714: Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener c onsisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 li tre per 50 kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosi ng of steps etc. complete. 3000 PJEFLO0715: 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 ce ment : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 ( 1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cemen t or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. comple te. 3010 PJEFLO0716: Providing and laying 52 mm thick cement concrete flooring with metallic hardner topping, under layer of 40 mm thick ceme nt concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer of 12 mm thick metallic con crete hardner consisting of mix 1:2 (1 cement : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compoun d such as IRONITE NO. 1 of IRONITE CO. OF INDIA LTD. or aproved equivalent mixed in the ratio 4:1 (4 parts of cement : 1 part of met allic floor hardening compound of approval quality) by weight, inclusive of cost of finishing, labour, material, equipment, etc. as per specifications and directions of the Engineer-in-Charge. 3020 PJEFLO0722: TILE FLOORING : 3030 PJEFLO0723: Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) : 3040 PJEFLO0724: Light shade pigment using white cement 3050 PJEFLO0725: Medium shade pigment using 50% white cement 50% Grey cement 3060 PJEFLO0726: Dark shade pigment using ordinary cement 3070 PJEFLO0727: Ordinary cement without any pigment 3080 PJEFLO0728: Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make & colour using acid and/or alkali r esisting mortar bedding and filling joints with acid and/or alkali resisting cement as per IS:4457, all complete as per specifcation s and directions of the Engineer-in-Charge : 3090 PJEFLO0729: In flooring on a bed of 10 mm thick mortar 1:4 (1 acid and/or alkali resistant cement : 4 coarse sand) : 3100 PJEFLO0730: In dado/ skirting on 12 mm thick mortar 1:4 (1 acid and/or alkali resistant cement : 4 coarse sand) : 3110 PJEFLO0731: MARBLE STONE FLOORING : 3120 PJEFLO0732: Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by the Engineer-in-Charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : 3130 PJEFLO0733: Makrana White Second Quality 3140 PJEFLO0734: Raj Nagar Plain 3150 PJEFLO0735: Agaria White 3160 PJEFLO0736: Black Zebra 3170 PJEFLO0737: Udaipur Green Marble 3180 PJEFLO0738: Pink Plain Marble 3190 PJEFLO0742: Providing and laying machine cut, mirror polished, 18 mm thick Italian Marble Stone slab (Perlato, Rosso verona, Fire Re d or Dark Emperadore, etc.) flooring laid in required pattern in linear portion of the building all complete as per architectural dr awings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jo inted with white cement slurry @ 4.4 Kg/sq.m., including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 3200 PJEFLO0743: Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstrac t etc.) and in patterns in combination with Italian marble stone slabs (Perlato, Rosso verona, Fire Red or Dark Emperadore, etc.) of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectu ral drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 Kg/sq.m. including pointing with white cement slurry admixed with pigment to match the ma rble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 3210 PJEFLO0744: Providing and laying natural Rajnagar White Marble tile strips 50 mm wide in flooring/ stairs laid over 20 mm thick ceme nt mortar 1:3 (1 cement : 3 coarse sand) including grouting the joints with white cement and matching pigment shade, cutting etc. as per manufacturers recommendation complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per d rawings, specifications and directions of the Engineer-in-Charge. (Minimum length of strip shall be 600 mm). 3220 PJEFLO0745: GRANITE STONE FLOORING : 3230 PJEFLO0746: Providing and laying flamed finish Granite stone slab (Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent) floori ng in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointe d with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and poli shing etc. all complete as specified and as directed by the Engineer-in-Charge. 3240 PJEFLO0747: Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear p ortions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base o f cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed wit h pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer- in-Charge. 3250 PJEFLO0748: Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent 3260 PJEFLO0749: Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red 3270 PJEFLO0750: Providing and laying natural granite stone tile strips 50 mm wide in flooring of approved shade laid over 20 mm thick ce ment mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment shade, cutting etc. as per manufacturers recommendation complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Minimum length of strip shall be 600 mm). 3280 PJEFLO0761: VITRIFIED FLOOR TILES : 3290 PJEFLO0762: Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mort ar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joints with white cement a nd matching pigments etc., complete : 3300 PJEFLO0763: Size of Tile 500x500 mm 3310 PJEFLO0764: Size of Tile 600x600 mm 3320 PJEFLO0765: Size of Tile 800x800 mm 3330 PJEFLO0766: Size of Tile 1000x1000 mm 3340 PJEFLO0767: Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, includin g grouting of joints. [Note: Payment for grouting of joints shall be made separately] : 3350 PJEFLO0768: Size of Tile 500x500 mm 3360 PJEFLO0769: Size of Tile 600x600 mm 3370 PJEFLO0770: Size of Tile 800x800 mm 3380 PJEFLO0771: Size of Tile 1000x1000 mm 3390 PJEFLO0772: Providing and laying Double Charge Vitrified Tiles (polished finish) of specified sizes (thickness to be specified by th e Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours an d shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. L aying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily : 3400 PJEFLO0773: Size of Tile 600 x 600 mm 3410 PJEFLO0774: Size of Tile 600 x 1200 mm 3420 PJEFLO0775: Size of Tile 800 x 800 mm 3430 PJEFLO0776: Size of Tile 800 x 1600 mm 3440 PJEFLO0777: Size of Tile 1000 x 1000 mm 3450 PJEFLO0778: Providing and laying Glazed Vitrified Tiles (polished finish) of specified sizes (thickness to be specified by the Manuf acturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours and shade s, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including groutin g the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying o f tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placin g the tiles gently and easily : 3460 PJEFLO0779: Size of Tile 600 x 600 mm 3470 PJEFLO0780: Size of Tile 600 x 1200 mm 3480 PJEFLO0781: Size of Tile 800 x 800 mm 3490 PJEFLO0782: Size of Tile 800 x 1200 mm 3500 PJEFLO0783: Size of Tile 1200 x 1200 mm 3510 PJEFLO0784: Providing and laying Glazed Vitrified Tiles (Matt/ Antiskid finish) of specified sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including g routing the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. La ying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily : 3520 PJEFLO0785: Size of Tile 600 x 600 mm 3530 PJEFLO0786: Size of Tile 600 x 1200 mm 3540 PJEFLO0787: Size of Tile 800 x 800 mm 3550 PJEFLO0788: Size of Tile 800 x 1200 mm 3560 PJEFLO0789: Size of Tile 1200 x 1200 mm 3570 PJEFLO0790: Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorpti on less than 0.08 % and conforming to IS:15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm th ick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joint with white cement & matching pigments etc. complete : 3580 PJEFLO0791: Size of Tile 500x500 mm 3590 PJEFLO0792: Size of Tile 600x600 mm 3600 PJEFLO0793: Size of Tile 800x800 mm 3610 PJEFLO0794: Size of Tile 1000x1000 mm 3620 PJEGEN2809: GENERAL WORKS : 3630 PJEGEN2816: Supply, installation, testing & commissioning of Turbo Roof Air Ventilators of Fan Size- 24 inch (neck/ throat dia.), Ve ntilator Diameter- 30 inch, Ventilator Base (FRP)- standard width 1.8m x dome height 750mm, Opening for ventilation dome- 860mm x 68 0mm x 608mm, thickness 2mm etc. complete in all respects and as per specifications and directions of the Engineer-in-Charge. 3640 PJEGEN2821: Providing and erecting 2.0 metre high temporary barricading at site; each panel of size 2.5m x 2.0m made of 40x40x6mm an gle iron or 50x50x3mm hollow MS tube posts/ horizontal members/ bracings covered with 1.63mm thick MS Sheet. The steel shall be fixe d with 30x5mm MS flat by suitable welding/ riveting. The panels shall be made so that gap of 50cm above the ground is available maki ng overall height as 2.5m. MS channel ISLC75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/ direction of E ngineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The ba rricading provided shall be retained in position at site continuously including shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for da mages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be r emoved without prior approval of the Engineer-in-Charge. [Note: One time payment shall be made for providing barricading from start of work till completion of work including shifting. The barricading provided shall remain to be the property of the contractor on co mpletion of the work]. 3650 PJEGEN2824: Providing and laying Non-Woven Geo Textile Mat NW 300 made from high quality polypropylene fibres having mass of 300 gra ms/ SQ.M of GAYATRI or approved equivalent make inclusive of cost of all labour, materials, tools, tackles etc. as per manufacturer s recommendations and directions of the Engineer-in-Charge. 3660 PJEHOR2827: HORTICULTURE & LANDSCAPING : 3670 PJEHOR2828: Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of ea rth measured in stacks will be reduced by 20% for payment]. 3680 PJEHOR2829: Supplying and stacking sludge at site including royalty and carriage up to any lead complete. [Note: Volume of sludge me asured in stacks will be reduced by 8% for payment]. 3690 PJEHOR2830: Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [No te: Volume of cattle manure measured in stacks will reduced by 8% for payment]. 3700 PJEHOR2835: Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-In-Charge. 3710 PJEHOR2836: Spreading of sludge, dump manure and/or good earth in required thickness including removal of debris/ un-wanted material , consolidation, dressing, levelling and watering etc. complete as per directions of the Engineer-in-Charge. [Note: Cost of sludge, dump manure and/or good earth shall be paid separately under relevant item of SOR]. 3720 PJEHOR2837: Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling. [ Note: Cost of supplying earth and sludge or manure and mixing shall be paid separately under relevant items of SOR]. 3730 PJEHOR2838: Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then dispo sing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by fi lling with earth or earth mixed with sludge or/ and manure before and after flooding trench with water. [Note: The rate is excluding cost of imported earth, sludge or manure]. 3740 PJEHOR2839: Rough dressing the trenched ground including breaking clods. 3750 PJEHOR2840: Flooding the ground with water including making kiaries and dismantling the same. 3760 PJEHOR2841: Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted veg etation. 3770 PJEHOR2844: Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with ro ots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. 3780 PJEHOR2845: Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further dep th of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of sta cked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with w ater, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of material s declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete. [Note: Cost of sludge, manure or extra earth shall be paid for separately under relevant item of SOR]. 3790 PJEHOR2846: Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts. [Note: Cost of m anure, sludge or extra good earth if needed shall be paid separately under relevant item of SOR]. 3800 PJEHOR2847: Holes 1.2 m diameter and 1.2 m deep 3810 PJEHOR2848: Holes 90 cm diameter and 90 cm deep 3820 PJEHOR2849: Holes 60 cm diameter and 60 cm deep 3830 PJEHOR2850: Holes 45 cm diameter and 45 cm deep 3840 PJEHOR2851: Supplying & Stacking of Selection No.1/ Doob Grass at site fresh & free from weeds having proper roots in green includin g loading, unloading, carriage and all taxes paid etc. complete as per directions of the Engineer-in-Charge. 3850 PJEHOR2852: Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn for 30 days or more till the gr ass forms a thick lawn, free from weeds and fit for mowing including supply and filling of good earth, if required during maintenanc e period. [Note: The grass and good earth shall be paid for separately under relevant item of SOR] : 3860 PJEHOR2853: In rows 5 cm apart in both directions 3870 PJEHOR2854: With grass Turf 3880 PJEHOR2855: Providing and laying Neelgiri/ Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with pro per level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, complete as per direction of the En gineer-in-Charge. 3890 PJEHOR2856: Providing & laying Selection No. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light wate ring the same maintenance for 30 days or more till the grass establish properly, complete as per direction of the Engineer-in-Charge . 3900 PJEHOR2857: Plantation of Trees, Shrubs and Hedges at site including watering and removal of unserviceable materials as per directio n of the Engineer-in-Charge (excluding cost of plant & water): 3910 PJEHOR2858: Tree Plant 3920 PJEHOR2859: Shrub Plant 3930 PJEHOR2860: Hedge Plant/ Ground Cover 3940 PJEHOR2861: Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, As hokas, Bottle Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days min imum complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions o f the Engineer-in-Charge. 3950 PJEHOR2862: Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 c oarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos (3 Nos horizontal & 4 Nos vertical “U“ shape) M.S. wi res of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specifie d period and stacking in required rows & height, all complete as per direction of the Engineer-in-Charge. 3960 PJEHOR2863: Top inside diameter 35 cm, outer bottom diameter 25 cm, total height 35 cm with wall thickness of 25.4 mm 3970 PJEHOR2864: Top inside diameter 30 cm, outer bottom diameter 20 cm, total height 30 cm with wall thickness of 25.4 mm 3980 PJEHOR2873: Filling of the Polythene bags by mixture of good earth and manure in the ratio of 2:1 (2 part of Good Earth and 1 part o f the Manure) and placing the same at appropriate place including supply & providing Polythene bags, all complete as per direction o f the Engineer-in-Charge. [Note:The Good Earth & Manure shall be paid separately under relevant item of SOR]. 3990 PJEHOR2874: Polythene bags size 12.5 cm diameter & 17.5 cm height 4000 PJEHOR2890: Edging with common burnt clay F.P.S (non modular) bricks of class designation 7.5, laid dry length wise including requir ed excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within any lead. 4010 PJEHOR2894: Providing & fixing of White River (Stone) Pebbles size of 2 to 2.50 dia in natural colour at site of work including lo ading, unloading, carriage and all taxes paid etc.and as per directions of the Engineer-in-Charge. 4020 PJEHOR2895: Providing and fixing of TUFLEX Garden Fencing Hexagonal Net or approved equivalent of green colour (Weight 510 (+/-8%) g rams/SQ.M) in width of 60 cm with bamboo of 90 cm length. The bamboo should be painted with green colour paint of approved brand and manufacture (two or more coats) and fixed 30 cm below ground level and 60 cm above ground level at a distance of 1.50 metres. The n et and bamboo should be binded with 2 mm G.I. wire at three places properly as per directions of the Engineer-in-Charge. 4030 PJEHOR2896: MAINTENANCE WORKS 4040 PJEHOR2897: Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing t he same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds an d fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or m anure. [Note: The good earth shall be paid for separately under relevant item of SOR]. 4050 PJEHOR2898: Cutting of hedge/ edge including removing of cut material, cleaning, hoeing of hedge/ edge, bed watering, manuring and a pplying insecticides and fungicides etc. (excluding the cost of all materials) complete as per directions of the Engineer-in-Charge. [Note: Unit SQM shall mean PER SQM PER MONTH.] 4060 PJEHOR2899: Cutting of designer hedge/ edge including removing of cut material, cleaning, hoeing of hedge/ edge, bed watering, manur ing and applying insecticides and fungicides etc. (excluding the cost of materials) complete as per directions of the Engineer-in-Ch arge. [Note: Unit SQM shall mean PER SQM PER MONTH.] 4070 PJEHOR2903: Pruning, trimming, shaping of trees/ shrubs (height 15 feet above) and removal of cut materials up to 50m lead inclusi ve of all labour, T&P, materials etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TREE]. 4080 PJEHOR2904: Providing and watering of Horticulture features i.e. lawn, tree, shrubs, hedge/ edge, ground cover etc. with irrigation water at the site of work. Watering shall be done through water tanker having 5000 litre capacity with one labour for watering inclu ding cost of water, filling of tanker, watering at site with all leads and lifts as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TRIP]. 4090 PJEHOR2905: Anti-termite treatment of trees by digging holes 30 cm deep & 4 cm dia, 6 to 7 holes around the tree using chemical emul sion (Chlorpyriphos 20% EC in the ratio of 1% concentration) at the rate of 1.5 liter per hole in two time or more application to ge t the trees free from termite infection, complete as per directions of the Engineer-in-Charge. [Note: Unit EA shall mean EACH TRE E]. 4100 PJEHOR2908: Cleaning and Sweeping of Lawn/ Garden area and keep it neat & clean by mechanized method/ manually, removimg litter, deb ris, picking of leaves, papers, plastic bottles etc. including disposal of collected waste in dustbin/ designated place, as per dire ction of the Engineer-in-Charge. [Note: All T&P, materials/ articles shall be provided by the Contractor]. 4110 PJEHOR2909: Removal of garden waste by TATA 407 or equivalent capacity vehicle including loading/ unloading, carriage up to 1.0 Km l ead & disposal at designated place etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TRIP] . 4120 PJEMAS0143: MASONRY WORK : 4130 PJEMAS0144: Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : 4140 PJEMAS0145: Cement mortar 1:4 (1 cement : 4 coarse sand) 4150 PJEMAS0146: Cement mortar 1:6 (1 cement : 6 coarse sand) 4160 PJEMAS0147: Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in : 4170 PJEMAS0148: Cement mortar 1:4 (1 cement : 4 coarse sand) 4180 PJEMAS0149: Cement Mortar 1:6 (1 cement : 6 coarse sand) 4190 PJEMAS0150: Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth le vel up to floor V level in all shapes and sizes in : 4200 PJEMAS0151: Cement mortar 1:4 (1 cement : 4 coarse sand) 4210 PJEMAS0152: Cement mortar 1:6 (1 cement : 6 coarse sand) 4220 PJERAI2738: Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required th ickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge. 4230 PJERAI2739: Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing lay er of boulders, in required thickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge. 4240 PJERAI2740: Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per directions of the Engineer-in-Charge. 4250 PJERAI2742: Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, o f size 1000x450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos. cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all a s per directions of the Engineer-in-Charge. 4260 PJEREI0090: RCC (CAST IN-SITU) : 4270 PJEREI0091: Providing and laying structural reinforced cement concrete work (1:1.5:3) conforming to IS:456 (1 cement : 1.5 coarse sa nd : 3 graded stone aggregate 20 mm nominal size) at all heights and depth for construction of foundations, beams, columns, stairca ses, chajja,lintels, balconies, shelves, plain window sills, roof slabs, facia, canopies, fins, porch, water tank etc. including pro viding centering, shuttering, staging, scaffolding, form work etc compacting with mechanical vibrator, curing etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engin eer. (Payment for Reinforcement shall be made as per relevant item of SOR). 4280 PJEREI0092: a) All work up to plinth level 4290 PJEREI0093: b) In superstructure at all floors up to floor five level, 4300 PJEREI0106: Steel reinforcement for R.C.C. workincluding initial straightening of coiled/uncoiled bars, removal of loose rust, cutti ng, bending to correct size & shape, binding with 18 gauge G.I. wire at each intersection and placing at any position, at any height and depth complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. : Thermo-Mechanically Treated bars of grade Fe-500 D or more 4310 PJEREP1046: Repair to plaster of thickness 12 mm to 20 mm in patches of area up to 2.5 SQM including cutting the patch in proper sha pe, raking out joints, preparing and plastering the wall surface etc. complete, including disposal of rubbish at unobjectionable are a outside Ownders premises, all complete as per directions of the Engineer-in-Charge : 4320 PJEREP1047: With cement mortar 1:4 (1 cement : 4 fine sand) 4330 PJEREP1048: With cement mortar 1:4 (1 cement : 4 coarse sand) 4340 PJEREP1103: Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube ch allies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condi tion for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runn ers, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of the Engineer-in-Charge. The elevational area of the scaffolding shal l be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. [Note: This item to be use d for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done] 4350 PJEREP1108: Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per the directions of Engineer-in-Charge. 4360 PJEREP1109: Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per the dir ections of Engineer-in-Charge. 4370 PJEREP1113: Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing me mbrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer o f membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 350/3 00 N/5 cm. (b) Tear strength in longitudinal and transverse direction as 60/80N. (c) Softening point of membrane not less than 150°C . (d) Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done thr ough the authorised applicator of the manufacturer of membrane. 4380 PJEREP1114: Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing me mbrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 l itre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physic al and chemical parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C a s 650/450N/5cm. (b) Tear strength in longitudinal and transverse direction as 300/250N. (c) Softening point of membrane not less tha n 150°C. (d) Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got d one through the authorised applicator of the manufacturer of membrane. 4390 PJEREP1115: Extra for covering top of membrane with Geotextile, 120 GSM non woven, 100% polyester of thickness 1 to 1.25 mm bonded t o the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 4400 PJEREP1116: STRUCTURAL REPAIR WORKS : 4410 PJEREP1117: Chipping of unsound/ weak concrete material from slabs, beams, columns etc. with manual Chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning t he exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as p er directions of the Engineer-in-Charge : 4420 PJEREP1118: 75 mm average thickness 4430 PJEREP1119: 50 mm average thickness 4440 PJEREP1120: 25 mm average thickness 4450 PJEREP1121: Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkali ne chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per directions of the Engineer-in-Charge : 4460 PJEREP1122: Bars up to 12 mm diameter 4470 PJEREP1123: Bars above 12 mm diameter 4480 PJEREP1124: Providing and applying anticorrosive treatment to exposed structural reinforcement with two coats of IPNET RB or equival ent with time interval of minimum 8-10 hours between each coat after the application of two coats of alkaline rust converting primer . The application shall be done by brush after cleaning existing reinforecement with wire/ rotary wire brush to make the surface fre e from loose material, dirt etc. and thoroughly washing with water and allowing it to dry inclusive of all materials, labour, equipm ent, etc. complete as per specifications and directions of the Engineer-in-Charge. The application of anticorrosive treatment shall be strictly as per technical specifications and directions of the Engineer-in-Charge. [Note: Unit M shall mean RUNNING METRE. Th e running metre of rebars shall be measured for payment purpose]. 4490 PJEREP1125: Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100 mm up to 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/ balconies including fixing the stee l bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per dire ctions of the Engineer-in-Charge : Up to and including 12 mm diameter 4500 PJEREP1126: Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and dir ections of the Engineer-in-Charge complete in all respect : 4510 PJEREP1127: SBR Polymer (@ 10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer. 4520 PJEREP1128: Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make. 4530 PJEREP1129: Providing, mixing and applying SBR polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement: 4 g raded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of the Engineer-in-Charge. [No te: Measurement and Payment- The pre-measurement of thickness shall be done just after the surface preparation is completed and paym ent under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by soundi ng/ tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/sq.mm] : 4540 PJEREP1130: 12 mm average thickness. 4550 PJEREP1131: 25 mm average thickness in 2 layers. 4560 PJEREP1132: 50 mm average thickness in 3 layers. 4570 PJEREP1140: Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/ honey-comb area of con crete/ masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of the Engineer-in-Charge. [Note: The payment shall be made on the basis of actual weight of approved grout injected] : 4580 PJEREP1141: Stirrer mixed Acrylic Polymer of approved make (@ 2% of weight of cement used) modified cement slurry made with non shri nk compound in Concrete/ RCC work. 4590 PJEREP1142: Stirrer mixed SBR Polymer (of approved make) modified cement slurry made with Shrinkage Compensating Cement in Concrete/ RCC work. 4600 PJEREP1143: Epoxy injection grout in Concrete/ RCC work of approved make. 4610 PJEROA1249: Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand pic king, rolling with 3 wheeled road/ vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/ binding material to fill up interstices of coarse aggregate, watering and compacting to the required de nsity. 4620 PJEROA1250: SURFACE DRESSING : 4630 PJEROA1251: Surface dressing on new surface with paving bitumen of grade VG-10 of approved quality using 2.25 Kg of bitumen per sqm with 1.65 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity etc. complete. 4640 PJEROA1252: Surface dressing on new surface in two coats with bitumen of grade VG-10 of approved quality using 1.8 kg of bitumen per sqm with 1.5 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface for first coat and 1.1 kg. of bitumen per sqm with 1.00 cu. metre of stone chippings 11.2 mm nominal size per 100 sqm of road surface for second coat, including consolidation of each coat separately with road roller of 6 to 8 tonne capacity etc. complete. 4650 PJEROA1253: Surface dressing on old surface with hot bitumen of grade VG-10 of approved quality using 1.95 kg of bitumen per sqm wit h 1.50 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 t onne capacity, etc. complete. 4660 PJEROA1254: Surface dressing one coat on new surface with bitumen of specified grade at a rate of 1.95 Kg/sqm of surface area with 1 .5 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity, etc. complete :Using Bitumen Emulsion (Minimum 50% bitumen content- RS grade conforming to IS:8887) 4670 PJEROA1255: Surface dressing one coat on old surface with bitumen of specified grade at the rate of 1.22 kg/ sqm of surface area wit h 1.10 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 t onne capacity etc. complete : Using Bitumen Emulsion (Minimum 50% bitumen content- RS grade conforming to IS:8887) 4680 PJEROA1285: SEAL COAT : 4690 PJEROA1286: Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitume n using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surfac e, including rolling and finishing with road roller all complete. [Note: This item to be operated only with the prior approval of th e Engineer-in-Charge]. 4700 PJEROA1298: PAINTING AREA / RUNWAY MARKING : 4710 PJEROA1299: Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conf orming to IS:164, on bituminous surface in white/ yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete 4720 PJEROA1300: New work (Two or more coats) 4730 PJEROA1301: Old work (One or more coats) 4740 PJEROA1309: Providing and fixing Glow Studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acrylore trite) or HIP (High impact polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by the Engineer-in-Charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope o f retro-reflective surface shall be 35 (+/-5) degress to base. The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as re commended in BS: 873 (Part-4):1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedu re recommended by the manufacturer complete and as per directions of the Engineer-in-Charge. 4750 PJEROA1315: Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermopl astic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, prop ane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cle aning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per directions of the Engineer-in-Charg e and accordance with applicable specifications. 4760 PJEROA1359: Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material withi n 50 metre lead as per directions of the Engineer-in-Charge. 4770 PJEROA1360: Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., dispos al of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per directions of the Engineer-in-Charge. 4780 PJEROA1361: Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the directions of the Engineer-in-Charge. [Note: Old CC paver blocks shall be supplied by the department free of cost]. 4790 PJEROA1362: Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, joint ed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except a t sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per directions of the Engineer-in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) Old kerb stones shall be suppl ied by the department free of cost.] 4800 PJEROO0824: THERMAL INSULATION: 4810 PJEROO0825: Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS:8183, density 24 kg/cu.m., 50mm thick, wrapped in 200G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building. 4820 PJEROO0826: Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS:8183, Density 16 Kg/cu.m., 5 0 mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing G.I. wir e. 4830 PJEROO0827: Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS:8183 having density 24 Kg/cu .m., 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug & washers and held in position by criss crossing G.I. wire etc. complete as per directions of the Engineer-in-Charge. 4840 PJEROO0828: Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS:8 183, density 48 Kg/cu.m., 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 Gauge wire mesh, for top most ceiling of building. 4850 PJEROO0872: FALSE CEILING : 4860 PJEROO0873: Providing and fixing tiled false ceiling of specified materials size 595x595 mm in true horizontal level, suspended o n inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sq.m., both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, sp aced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between m ain T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of siz e 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for servi like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using G.I. slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia. and 50 mm long dash fasteners, 4 mm G.I. adjustable rods w ith galvanised butterfly level clips size 85x30x0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings a nd as directed by the Engineer-in-Charge : 4870 PJEROO0874: G.I. Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm dro p; made of G. sheet having galvanizing of 100 gms/sq.m. (both sides inclusive) and electro-statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 4880 PJEROO0875: G.I. Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made G.I. sheet having galvanizing of 100 gms/sq.m. (both sides inclusive) and 20% perforation area with 1.8 mm dia. holes and having NRC (Noise Reduction Coefficient) of 0.5, electro-statically polyester powder coated thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 4890 PJEROO0876: 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from n atural gypsum as per IS:2095 (Part-1) and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. 4900 PJEROO0877: 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS:2095 (Part-1 ), of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm center to center with center borders of 48 mm and the side border s of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bon ded glass wool backing. 4910 PJESAN1368: SANITARY INSTALLATIONS : 4920 PJESAN1369: Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 l itre low level white P.V.C. dual flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming t o IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White vitreous china orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 4930 PJESAN1370: Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litr e low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:72 31, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 4940 PJESAN1371: W.C. pan with ISI marked white solid plastic seat and lid. 4950 PJESAN1373: Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low lev el white vitreous china dual flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangemen t with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings a nd brackets, cutting and making good the walls and floors wherever required : 4960 PJESAN1374: W.C. pan with ISI marked white solid plastic seat and lid 4970 PJESAN1376: Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass union s and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requir ed : 4980 PJESAN1377: One urinal basin with 5 litre white P.V.C. automatic flushing cistern 4990 PJESAN1378: Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern 5000 PJESAN1379: Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern 5010 PJESAN1391: Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pat tern, including painting of fittings and brackets, cutting and making good the walls wherever require : 5020 PJESAN1392: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 5030 PJESAN1407: Providing and fixing Stainless Steel A ISI 304(18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 5040 PJESAN1408: Kitchen sink with drain board : 5050 PJESAN1409: 510x1040 mm bowl depth 250 mm 5060 PJESAN1410: 510x1040 mm bowl depth 225 mm 5070 PJESAN1411: 510x1040 mm bowl depth 200 mm 5080 PJESAN1412: 510x1040 mm bowl depth 178 mm 5090 PJESAN1457: Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete : 5100 PJESAN1466: Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick har d board ground fixed to wooden cleats with C.P. brass screws and washers complete. 5110 PJESAN1473: Providing and fixing toilet paper holder : 5120 PJESAN1474: C.P. Brass 5130 PJESAN1665: Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour : 5140 PJESAN1666: Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. 5150 PJESAN1667: Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. 5160 PJESAN1668: Providing and fixing PTMT Bottle Trap for Wash basin and sink : 5170 PJESAN1669: Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of th e waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. 5180 PJESAN1670: Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of th e waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms. 5190 PJESAN1671: Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 5200 PJESAN1672: Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wal l face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. 5210 PJESAN1673: Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed f ittings arrangement of approved quality and colour : 5220 PJESAN1674: 450 mm long towel rail with total length of 495 mm, 78 mm width and effective height of 88 mm, weighing not less than 17 0 gms. 5230 PJESAN1675: 600 mm long towel rail with total length of 645 mm, 78 mm width and effective height of 88 mm, weighing not less than 19 0 gms. 5240 PJESTE0618: Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, lock ing arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 5250 PJESTE0619: Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respe ctively, including applying a priming coat of approved steel primer. 5260 PJESTE0623: Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through t heir entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing n ecessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 (Part-1) and M.S. top cover of required thickness for rolling shutters : 5270 PJESTE0624: 80 x 1.25 mm M.S. laths with 1.25 mm thick top cover 5280 PJESTE0627: Providing and fixing ball bearing for rolling shutters. 5290 PJESTE0628: Extra for providing mechanical device chain and crank operation for operating rolling shutters : 5300 PJESTE0629: Exceeding 10.00 sq.m. and up to 16.80 sq.m. in the area 5310 PJESTE0630: Exceeding 16.80 sq.m. in area 5320 PJESTE0664: Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase rail ing and similar works, including applying priming coat of approved steel primer : 5330 PJESTE0665: M.S. Tube 5340 PJESTE0666: E.R.W. Tubes 5350 PJESTE0667: G.I. Pipes 5360 PJESTE0674: Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. , of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of the Engineer-in-C harge. [Note: For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nu ts, bolts, fasteners etc.] 5370 PJESTE0675: Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts c omplete : 5380 PJESTE0676: Galvanised M.S. wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides. 5390 PJESTE0677: Stainless Steel (Grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. 5400 PJESTE0687: Supplying, fitting and fixing hot dip galvinised barbed line wire through holes in fencing posts (already made in the bo dy of the post), tightening and fixing the wire in tight condition with straining bolts (straining bolts at end post) including the cost of cutting and lapping joints, making holes, straining bolts, galvanised staples, binding wires etc. complete in all respects i nclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Cha rge. 5410 PJESTE0690: Supplying and placing in position 5.0 mm thick steel chequered plates over cable ducts, valve pits etc. including provis ion for lifting arrangements complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawing s, specifications and directions of the Engineer-in-Charge. 5420 PJESTE0691: Supplying & fixing Pigeon Protection net of mesh 15 mm x 15 mm & Gauge SW14 in sheds including specials required for bol ting with tie members of truss, painted with two coats of synthetic enamel paint of over a coat of red oxide zinc chrome primer comp lete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction o f the Engineer-in-Charge. 5430 PJESTE0698: G.I. Barbed Wire Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizon tal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 Kg/100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. [Notes: (1) Cost of posts, struts, earth work and concrete work to be paid for separately. (2) Payment to be made per metre cost of total length of barbed wire used]. 5440 PJESTE0704: Supplying, fitting and fixing punched tape concertina spiral coil of 50 turns per coil having core wire of 2.6 mm diamet er made of high carbon spring steel of high tensile strength as per IS:4454 (Part-I, Grade-II) having minimum galvanising coating th ickness equivalent to 230 grams per square metre and low carbon steel strip of 0.5 mm thickness having a series of barbes punched al l along the length on both sides of the strip at regular interval as per IS:513, DD quality having minimum galvanising coating thick ness of 12 microns. Hardness of tape should be between 137-180 VPN (Victor Penetration Number). The coil should be clipped sufficien tly at regular intervals. The coil should not be stretched for more than 6.0 m length and the minimum diameter of the coil in the cl osed condition should not be less than 600 mm complete in all respects inclusive of cost of all labour, materials, tools, tackles et c. as per drawings, specifications and directions of the Engineer-in-Charge. 5450 PJESTE0705: Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (tota l length 90 m), having 50 nos rounds per 6 metre length, up to 3 m height of wall with existing angle iron Y shaped placed 2.4 m o r 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per the directions of Engineer-in-Charge, with re inforced barbed tape (R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre. [Note: Cost of M.S. angle, C.C. blocks shall be paid separately]. 5460 PJESTO0175: STONE WORK : 5470 PJESTO0176: RANDOM RUBBLE MASONRY : 5480 PJESTO0177: Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cem ent : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : 5490 PJESTO0178: Cement mortar 1:6 (1 cement : 6 coarse sand) 5500 PJESTO0179: Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling l evel and the like. 5510 PJESTO0180: Cement mortar 1:6 (1 cement : 6 coarse sand) 5520 PJEWAT1698: WATER SUPPLY : 5530 PJEWAT1699: CPVC PIPES : 5540 PJEWAT1700: Internal Work - Exposed on wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stabil ity for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per directi ons of the Engineer-in-Charge : 5550 PJEWAT1701: 15 mm nominal outer dia pipes 5560 PJEWAT1702: 20 mm nominal outer dia pipes 5570 PJEWAT1703: 25 mm nominal outer dia pipes 5580 PJEWAT1704: 32 mm nominal outer dia pipes 5590 PJEWAT1705: 40 mm nominal outer dia pipes 5600 PJEWAT1706: 50 mm nominal outer dia pipes 5610 PJEWAT1707: Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stab ility for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spa cing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good th e same including testing of joints complete as per directions of the Engineer-in-Charge : 5620 PJEWAT1708: 15 mm nominal dia pipes 5630 PJEWAT1709: 20 mm nominal dia pipes 5640 PJEWAT1710: 25 mm nominal dia pipes 5650 PJEWAT1711: 32 mm nominal dia pipes 5660 PJEWAT1712: External Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solve nt cement, trenching, refilling & testing of joints complete as per directions of the Engineer-in-Charge : 5670 PJEWAT1713: 15 mm nominal dia pipes 5680 PJEWAT1714: 20 mm nominal dia pipes 5690 PJEWAT1715: 25 mm nominal dia pipes 5700 PJEWAT1716: 32 mm nominal dia pipes 5710 PJEWAT1717: 40 mm nominal dia pipes 5720 PJEWAT1718: 50 mm nominal dia pipes 5730 PJEWAT1719: 65 mm nominal dia pipes 5740 PJEWAT1720: 80 mm nominal dia pipes 5750 PJEWAT1721: 100 mm nominal dia pipes 5760 PJEWAT1722: 150 mm nominal dia pipes 5770 PJEWAT1723: G.I. PIPES : 5780 PJEWAT1724: Internal Work - Exposed on Wall: Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutti ng and making good the walls etc. : 5790 PJEWAT1725: 15 mm dia nominal bore 5800 PJEWAT1726: 20 mm dia nominal bore 5810 PJEWAT1727: 25 mm dia nominal bore 5820 PJEWAT1728: 32 mm dia nominal bore 5830 PJEWAT1729: 40 mm dia nominal bore 5840 PJEWAT1730: 50 mm dia nominal bore 5850 PJEWAT1731: Internal Work - Concealed in wall: Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including mak ing good the walls etc. concealed pipe, including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall : 5860 PJEWAT1732: 15 mm dia nominal bore 5870 PJEWAT1733: 20 mm dia nominal bore 5880 PJEWAT1734: External Work: Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : 5890 PJEWAT1735: 15 mm dia nominal bore 5900 PJEWAT1736: 20 mm dia nominal bore 5910 PJEWAT1737: 25 mm dia nominal bore 5920 PJEWAT1738: 32 mm dia nominal bore 5930 PJEWAT1739: 40 mm dia nominal bore 5940 PJEWAT1740: 50 mm dia nominal bore 5950 PJEWAT1741: 65 mm dia nominal bore 5960 PJEWAT1742: 80 mm dia nominal bore 5970 PJEWAT1743: Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including c utting and threading the pipe etc. complete : 5980 PJEWAT1744: 25 to 40 mm nominal bore 5990 PJEWAT1745: 50 to 80 mm nominal bore 6000 PJEWAT1746: Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete. [Note: Cost of water meter and stop cock to be paid separately]. 6010 PJEWAT1799: BRASS FITTINGS : 6020 PJEWAT1800: Providing and fixing brass bib cock of approved quality : 6030 PJEWAT1801: 15 mm nominal bore 6040 PJEWAT1802: 20 mm nominal bore 6050 PJEWAT1803: Providing and fixing brass stop cock of approved quality : 6060 PJEWAT1804: 15 mm nominal bore 6070 PJEWAT1805: 20 mm nominal bore 6080 PJEWAT1806: Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 6090 PJEWAT1807: 20 mm nominal bore 6100 PJEWAT1808: 25 mm nominal bore 6110 PJEWAT1809: 32 mm nominal bore 6120 PJEWAT1810: 40 mm nominal bore 6130 PJEWAT1811: 50 mm nominal bore 6140 PJEWAT1812: 65 mm nominal bore 6150 PJEWAT1813: 80 mm nominal bore 6160 PJEWAT1971: C.P. BRASS FITTINGS : 6170 PJEWAT1972: Providing and fixing C.P. brass bib cock of approved quality conforming to IS-8931 : 15 mm nominal bore 6180 PJEWAT1973: Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms : 15 mm nominal bore 6190 PJEWAT1974: Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms : 15 mm nominal bore 6200 PJEWAT1975: Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS-8931 : 15 mm nominal bore 6210 PJEWAT1976: Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS-8931 : 15 mm nominal bore 6220 PJEWAT1977: Providing and fixing C.P. Brass extension nipple (size 15mm x 50mm) of approved make and quality as per directions of th e Engineer-in-Charge. 6230 PJEWAT1978: Providing and fixing following C.P. Brass central hole wash basin mixer with copper pipe/ pipes and brass nuts of size 1 5mm, etc. complete including cutting & making good the walls wherever required complete in all respects as per specifications and di rections of the Engineer-in-Charge : 6240 PJEWAT1979: C.P. central hole wash basin mixer (Ref. Make: JAQUAR, Model: Cat. No.-7171 Queens or approved equivalent) with 2 nos. x 10mm diameter & 450mm long copper pipes. 6250 PJEWAT1980: C.P. central hole wash basin mixer (Ref. Make: JAQUAR, Model: Cat. No.-167 or approved equivalent) with 1 no. x 10mm dia meter & 450mm long copper pipe. 6260 PJEWAT2382: Disinfecting C.I. water mains by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleani ng the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main t ested in the municipal laboratory : 6270 PJEWAT2383: 80 mm diameter C.I. pipe. [Note: Unit M shall mean PER 100 METRE] 6280 PJEWAT2384: 100 mm diameter C.I. pipe. [Note: Unit M shall mean PER 100 METRE] 6290 PJEWAT2385: 125 mm diameter C.I. pipe. [Note: Unit M shall mean PER 100 METRE] 6300 PJEWAT2434: Cleaning of terrace/ loft water storage tank (inside surface area) up to 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching pow der @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per the directions of Engineer-in-Charge. [Note: The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deductio n will be made @ Rs. 0.10 per litre if during cleaning any G.I. fittings or ball cock is damaged that is to be repaired by the Contr actor at his own cost and nothing extra will be paid on this account]. 6310 PJEWAT2435: Cleaning of underground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations: (1) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. (2) Entire surface area of the sump shall then scrubbed thoroughly with wir e brush etc. and pressure washed with water. (3) Chlorination of RCC internal surface by liquid chlorine. (4) The treated surface sh all be dried using air jetting and all loose particles shall be removal from the surface. (5) Finally the surface shall be treated w ith ultra-violet radiation etc. as per direction of the Engineer-in-Charge. 6320 PJEWAT2436: Disconnecting damaged overhead/ terrace PVC water storage tank of any size from water supply line and removing from th e terrace including shifting at ground level as per the directions of Engineer-in-Charge. 6330 PJEWOO0237: Providing and fixing panelled or panelled & glazed shutters 35 mm thick for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per directions of the Engineer-in-Charge. [Note: Butt hinges and necessary screws shall be paid separately under relevant item of SOR] : 6340 PJEWOO0238: Second class teak wood 6350 PJEWOO0239: Kiln seasoned and chemically treated hollock wood 6360 PJEWOO0240: Kiln seasoned selected planks of sheesham wood 6370 PJEWOO0241: Providing and fixing panelled or panelled & glazed shutters 30 mm thick for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per directions of the Engineer-in-Charge. [Note: Butt hinges and necessary screws shall be paid separately under relevant item of SOR] : 6380 PJEWOO0242: Second class teak wood 6390 PJEWOO0243: Kiln seasoned and chemically treated hollock wood 6400 PJEWOO0244: Kiln seasoned selected planks of sheesham wood 6410 PJEWOO0245: Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS:14616 and TADS 15:20 01 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of the Engineer-in-Charg e and panelling with panels of: [Note: Butt hinges and necessary screws shall be paid separately] : 6420 PJEWOO0246: 12 mm thick plain grade-1, medium density flat pressed three layer particle board FPT-I or graded wood particle board FP T-I, IS:3087 marked, bonded with BWP type synthetic resin adhesive as per IS:848 : 6430 PJEWOO0247: 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade -1, medium density flat pressed, th ree layer particle board FPT-I or graded wood particle board FPT-I, conforming to IS:3087, bonded with BWP type synthetic resin adhe sive as per IS : 848 and pre-laminated conforming to IS:12823, Grade 1, Type-II marked. 6440 PJEWOO0248: 12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing laminatio n) grade-1, medium density flat pressed, three layer particle board FPT-I or graded wood particle board FPT-1 conforming to IS:3087 bonded with BWP type synthetic resin adhesive as per IS:848 and pre-laminated conforming to IS:12823, Grade-1, Type-II marked. 6450 PJEWOO0249: Providing and fixing panelling or panelling & glazing for panelled or panelled & glazed shutters (25 mm to 40 mm thick s hutters) for doors, windows and clerestory windows [Note: Area of opening for Panel inserts/ Glass panes excluding portion inside gr ooves or rebates shall be measured for payment] : 6460 PJEWOO0250: Second class teak wood 6470 PJEWOO0251: Kiln seasoned and chemically treated hollock wood 6480 PJEWOO0252: Float Glass Panes - 4.0 mm thick (weight not less than 10 Kg/SQM) 6490 PJEWOO0253: Float Glass Panes - 5.5 mm thick (weigth not less than 12.5 Kg/SQM) 6500 PJEWOO0254: Fly proof Stainless Steel (Grade 304) wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beadi ng 6510 PJEWOO0255: 12 mm thick Exterior Grade-I MDF Board conforming to IS:14587, pre-laminated with decorative lamination on both side 6520 PJEWOO0256: 12 mm thick Marine plywood conforming to IS:710 6530 PJEWOO0257: 12 mm thick Fire retardant plywood conforming to IS:5509 6540 PJEWOO0258: Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 4.0 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws : 6550 PJEWOO0259: Second class teak wood 6560 PJEWOO0260: Kiln seasoned and chemically treated hollock wood 6570 PJEWOO0261: Kiln seasoned selected planks of sheesham wood : 6580 PJEWOO0291: Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) non-decorative type, core of block bo ard construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands a nd face veneers on both faces of shutters : 6590 PJEWOO0292: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 6600 PJEWOO0293: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 6610 PJEWOO0294: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws 6620 PJEWOO0295: Extra for providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shu tters conforming to IS:2202 (Part-I) : On one side only 6630 PJEWOO0296: Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (ov er all area of door shutter to be measured). 6640 PJEWOO0297: Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors. [Notes: (1) Cost of glass excluded. ( 2) Overall area of door shutter to be measured] : 6650 PJEWOO0298: Rectangular or square 6660 PJEWOO0299: Circular 6670 PJEWOO0300: Extra for cutting rebate in flush door shutters. [Note: Total area of the shutter to be measured]. 6680 PJEWOO0301: Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 6690 PJEWOO0302: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size : 6700 PJEWOO0303: Second class teak wood 6710 PJEWOO0304: Kiln seasoned and chemically treated hollock wood 6720 PJEWOO0305: Kiln seasoned selected class of sheesham wood 6730 PJEWOO0328: Providing and fixing chromium plated brass curtain rods having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 6740 PJEWOO0329: 12 mm dia. 6750 PJEWOO0330: 20 mm dia. 6760 PJEWOO0331: 25 mm dia. 6770 PJEWPF2691: WATERPROOFING : 6780 PJEWPF2692: Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : (a) First course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS:2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (b) Second course of 20 m m cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (c) Third course of applying blown or residual bitumen applied hot at 1.7 Kg/ sqm of ar ea. (d) Fourth course of 400 micron thick PVC sheet. [Note: Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm]. 6790 PJEWPF2698: Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing ceme nt compound consisting of applying : (a) After surface preparation, first layer of slurry of cement @ 0.488 Kg/sqm mixed with water proofing cement compound @ 0.253 Kg/sqm. (b) Laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 K g/sqm mixed with water proofing cement compound @ 0.670 Kg/sqm and coarse sand @ 1.289 Kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) Fourth and final layer of brick tiling with cement mortar (which will be paid for separately). For the pu rpose of measurement the entire treated surface will be measured. 6800 PJEWPF2699: Grading roof for water proofing treatment with : 6810 PJEWPF2700: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 6820 PJEWPF2701: Cement mortar 1:3 (1 cement : 3 coarse sand) 6830 PJEWPF2702: Cement mortar 1:4 (1 cement : 4 coarse sand) 6840 PJEWPF2703: Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers havin g Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @ 10.76 litre/10 sqm. One coat of self-priming of elast omeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid ( dry film thickness of complete application/ system not less than 500 microns). The operation shall be carried out after scrapping an d properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per directions of the Engine er-in-Charge. 6850 PJEWPF2704: Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC struc tures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ su bway and bridge deck etc., prepared by mixing in the ratio of 5:2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3:1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative ( internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrost atic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and directions of the Engineer-in-Charge. The product performance shall carry guaranteed for 10 years against any leakage : 6860 PJEWPF2705: For vertical surface two coats @ 0.70 kg per sqm per coat 6870 PJEWPF2706: For horizontal surface one coat @ 1.10 kg per sqm 6880 PJEWPF2707: Providing and applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterpro ofing polymers on interior wall plaster surface in three coats @ 14.35 Kg/10 sqm. One coat of self priming of cementatious waterproo fing polymer (dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in t he ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per 10 NRECIV0002: Through cleaning of paved and unpaved areas, roads, road side berms, broming removal of scraps and other unwanted left o ver materials including removal of chockage in the drains, removal of chockage from the road side / pave or unpaved area side drains and disposal of the rubbish etc. to the nearest garbage bin or as directly by Engineer-in-charge including laboures, broom, trolley and other consumables etc.complete. 20 NRECIV0003Cleaning the tiles, lavatory, flooring, urinals etc. by removing stains etc. by using Vim powder / cleaning powder / ISI g rade black phenyle / while phenyle / Acid /Naptha balls / Coir brushes / wire brushes Finit in required proportion to make the are a clean and free from all dust, dirt and stains etc. including cost of all labour and materials complete. (Only floor area shall be measured). 30 NRECIV0004Mopping of floors of offices, toilets, control rooms, electrical sub station etc. with soap solution or phenyle water with wet cloth after sweeping the floor with phooll broom, removing cob-webs with all tools, tackles, labour & materials etc. complete a s per directions of Engineer -in-charge including cleaning of ventilator glass panes from both the sides upto any height with cleani ng powder,paint remover as per requirement all labour, material etc.complete. 40 NRECIV0005Carrying out miscellaneous activities related to general maintenance like daily dusting the furnitures, walls shelves, cle aning the carpets, sofas, Cleaning and sweeping the stair case, passages, backyard, verandah, garrages, removal of cow webs, with al l labours, tools & tackles complete including supervising charges. (Unit EA shall mean carrying out above activities for 8 hrs. a day). 50 NRECIV0008Collection of Kitchen waste, dry waste & toxic waste in offices and colony from all Residential & Public Buildings, Execut ive Hostel, Staff Hostel, Canteen, Guest House, Club etc. The workmen shall collect the waste from each house & Public Buildings, se gregate the waste into biodegradable & non bio-degradeable waste and finally dispose them separately at designated place (Dumping Ya rd/ Pit) on daily basis as per requirement, with trained workmen, with all labour, tools, tackles, safety & protective clothes etc. complete as per direction of Engineer-in-charge. All consumables required including manpower, tools & tackles, PPEs, uniform to work men, etc. are to be supplied by Contractor without any extra cost and performing work as per item decription and direction of Engine er-in-Charge as well as instructions in Special Condition of Contract if any. Payment of Paddle Rickshaw (thela) will be made sepera tely. The unit MONTH (MON) shall mean per house/building per month 60 PJEDRA2588Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. [Note: Unit KL s hall mean KILO LITRE] 70 PJEHOR2828Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of eart h measured in stacks will be reduced by 20% for payment]. 80 PJEHOR2830Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [Note : Volume of cattle manure measured in stacks will reduced by 8% for payment]. 90 PJEHOR2835Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-In-Charge. 100 PJEHOR2836Spreading of sludge, dump manure and/or good earth in required thickness including removal of debris/ un-wanted material, consolidation, dressing, levelling and watering etc. complete as per directions of the Engineer-in-Charge. [Note: Cost of sludge, du mp manure and/or good earth shall be paid separately under relevant item of SOR]. 110 PJEHOR2861Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, Asho kas, Bottle Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days minim um complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. 120 PJEHOR2898Cutting of hedge/ edge including removing of cut material, cleaning, hoeing of hedge/ edge, bed watering, manuring and app lying insecticides and fungicides etc. (excluding the cost of all materials) complete as per directions of the Engineer-in-Charge. [ Note: Unit SQM shall mean PER SQM PER MONTH.] 130 PJEHOR2903Pruning, trimming, shaping of trees/ shrubs (height 15 feet & above) and removal of cut materials up to 50m lead inclusive of all labour, T&P, materials etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TREE]. 140 PJEHOR2904Providing and watering of Horticulture features i.e. lawn, tree, shrubs, hedge/ edge, ground cover etc. with irrigation wa ter at the site of work. Watering shall be done through water tanker having 5000 litre capacity with one labour for watering includi ng cost of water, filling of tanker, watering at site with all leads and lifts as per direction of the Engineer-in-Charge. [Note: Un it EA shall mean PER TRIP]. 150 PJEHOR2908Cleaning and Sweeping of Lawn/ Garden area and keep it neat & clean by mechanized method/ manually, removimg litter, debri s, picking of leaves, papers, plastic bottles etc. including disposal of collected waste in dustbin/ designated place, as per direct ion of the Engineer-in-Charge. [Note: All T&P, materials/ articles shall be provided by the Contractor]. 160 PJEHOR2909Removal of garden waste by TATA 407 or equivalent capacity vehicle including loading/ unloading, carriage up to 1.0 Km lea d & disposal at designated place etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TRIP]. 170 PJEWAT2434Cleaning of terrace/ loft water storage tank (inside surface area) up to 2000 litre capacity at all heights with coconut b rushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powde r @ 0.5gm per litre capaci ty of tank, including marking the date of cleaning on the side of tank body with the help of stencil and p aint and disposing of malba, all complete as per the directions of Engineer-in-Charge. [Note: The old date already written on tank s hould be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any G.I. fittings or ball cock is damaged that is to be repaired by the Contrac tor at his own cost and nothing extra will be paid on this account].
Contract Date: Dec 16, 2025 Contract Value : ₹ 38.05 Lakh
Boards / Undertakings / PSU No of Bidders 10
Rajasthan View Result →
6.
Water Resources and Irrigation #8332601 AOC
Improvement Of Irrigation Potential By Resuscitation Of Kulai Irrigation Scheme Within Block- Simlapal, District- Bankura- 1 Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specifications Clause 202 for Rural Roads of MORD. 2 (I) ByManual Meansb) Cement Concrete 3 Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. 4 a) In ground floor including roof. 5 Earthwork in excavation in the canals / drainage channels / borrow pits / River bed / slope of bank as noted below as per designed section & throwing the spoils in layers of 25 cm. for making banks as per profile or to deposit the same in any other place within an initial lead of 30 metre and initial lift of 1.5 metre including breaking clods, rough dressing etc. complete as per direction of the Engineer-in-charge. 6 (a) Ordinary soil / local soil / soil mixed with moorum or kankar / silt, dry or moist / slushy silt / sticky soil. 7 Extra rate over Item Nos. 3 for all kinds of soil for every additional lead of 30 metres or part thereof beyond the initial lead of 30 metres. 8 Additional Lift = 1 No. 9 Additional Lift = 2 No. 10 Earth work from borrow pits over existing embankment or for repairs to embankment, closing breaches etc. within an initial lead of 30 metre and lift of 1.50 metre including breaking clods and depositing the same in layers not exceeding 25 cm. and rough dressing etc. complete as per profile. 11 Extra rate over item No. 3 for all kinds of soil for every additional lead of 30 metre or part thereof beyond the initial lead of 30 metre. 12 Additional Lead = 1 Nos. 13 Additional Lead = 2 Nos. 14 Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.a) upto 3 m depth. 15 Without pumping out water and shoring. 16 Earthwork in filling in foundation trenches with good earth in layers not exceeding 15cm. including watering and ramming layer by layer complete with earth obtained from excavation of foundation or from fresh excavation of land arranged by Department within a lead of 150 m. 17 Box cutting or filling in Road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and where necessary. Depth up to 150 mm. 18 Cutting uprooting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by Engineer-in-charge. 19 Scraping Plaster in Lime or Cement Mortar from Brick / Stone Masonry as per Technical Specification Clause 202 for Rural Roads of MORD. 20 Sand filling in foundation trenches and at the back of abutments, wing-walls etc. with good local sand free from earth in layers not exceeding 15 cm. including inundating each layer by profuse water and poking and ramming layer by layer complete including supply of sand. Quality of sand is to be approved by the Engineer-in-charge.(The compaction factor may be taken as 0.835) 21 Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. 22 Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction. 23 (b) Where staging is not required 24 Hire and labour charges for staging with sal bullah for super structure of bridge (Major and Minor) including stripping off and removing clearing on completion of work as per design and drawing approved by the Engineer-in-charge. 25 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. 26 (a) Pakur variety 27 Cast-in-situ cement concrete blocks or lining units as per designed section and specification,in nominal Mix. 1:1.5:3 (correspomding to M20 grade) with 20 mm down stone metal aggregate, laid in position by casting in alternative panels or otherwise to keep a gap of 12mm between the adjacent units, over a layer of polythene sheet of thickness not less than 100 micron to act as a separator between the bottom surface of the block and the sand cushion/ filter material laid below the blocks, including dressing, ramming, shuttering, finishing the exposed surface by trowel without adding any additional cement and sand mortar, curing and filling the gaps between the adjacent units by 5.6mm down coarse aggregate to be compacted properly, with all leads and lifts including supply and carriage of all materials, complete, without the cost of sand cushion/ filter. 28 (a) Pakur variety 29 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC. In Ground Floor: 30 (b) two Coat 31 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) 32 a) Normal Acrylic Emulsion 33 Painting block letters or digits in Black Japan or any approved paint as per direction. 34 c) Size above 4 cm. and upto 5 cm 35 Supplying, fitting and placing HYSD bar reinforcement in Sub-structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge.Tor Steel rods I HYSDbars I TMTbars (SAIL/ TATA/ RINL) 36 Supplying, fitting and placing HYSD bar reinforcement in Bridge Super-structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications.Tor Steel rods I HYSDbars I TMTbars (SAIL/ TATA/ RINL) 37 Reinforcement for reinforced concrete work inall sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary),cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. 38 a) For works in foundation, basement and upto roof of ground floor/upto 4 m. (i) Tor Steel/Mild Steel1. SAIL/TATA/RINL 39 Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy. 40 Guniting concrete surface with cement mortar (25 mm nominal thick) applied with compressor after cleaning surface and spraying with epoxy complete as per Technical specification 41 Sealing of cracks / porous concrete by injection process through nipples/Grouting complete as perTechnical specification. 42 A Cement Grout 43 Removal of defective concrete, cleaning the surface thoroughly, applying the shotcrete mixture mechanically with compressed air under pressure, comprising of cement, sand, coarse aggregates, water and quick setting compound in the proportion as per clause 2807.1., sand and coarse aggregates conforming to IS: 383 and table 1 of IS: 9012 respectively, water cement ratio ranging from 0.35 to 0.50, density of gunite not less than 2000 kg/cum, strength not less than 25 MPa and workmanship conforming to clause 2807.6. (40 mm average thickness.) 44 Supply of stone boulder (pakur veriety) at site each weighung 30/40Kg. including cost of material, loading, unloading and stacking and including all incidental charges like royalty. (Royalty certificate in original from competent authority are to be submitted along with the bill, otherwise amount due towards Royalty of stone/laterite boulder will be deducted from the bills of works). 45 Labour charges for laying boulder/ shingles in apron or within wire netting of sausage for slope pitching including carriage upto 30 metre and all lifts & dressing the exposed faces etc. complete as per direction of the Engineer-in-charge. 46 I) Boulder. 47 Labour charges for collecting loose scattered laterite and stone boulders from slope, bed or apron and stacking the same above ground level within a lead of 100 metre and all lifts as per direction of the Engineer - in-charge. 48 Relaying displaced stone or laterite boulder pitching including dressing, preparing bed with necessary earthwork up to 30 cm depth complete with cost of collection of boulder within a lead of 30 metre. 49 Caulking joints of laterite/ stone boulder or Brick pitching with cement mortar 1:4 and flush pointing as per direction of the Engineer-in-charge. (a) Stone / laterite boulder pitching. 50 Labour charges for bouIder pitching on top and slope by placing required boulders (each weighing 20 Kg. and above within lead of 100 metres and all lifts) including filling the interstices with fragments as required, preparing sub-grade by cutting or filling the earth on slope upto 7.5 cm. depth, watering and ramming where necessary complete as per direction of the Engineer-in-charge. 51 a) Over Jhama Khoa / metal filter/ Geo-textile filter. 52 Laying of a geotextile filter between pitching and embankment slopes on which pitching is laid to prevent escape of the embankment material through the voids of the stone pitching/cement concrete blocks as well as to allow free movement of water without creating any uplift head on the pitching. 53 Labour charge for dumping/ laying of Laterite/ Stone Boulders/ Shingles/ Brick Bats, from stack of work site with all leads and lifts in water or spreading the same on the slope of the bank of River/ Sea or the slope of the embankment or in the River/ Sea bed to an uniform thickness as per direction of the Engineer-in-charge including cost of all accessories and other incidental charges. 54 (a) Boulder 20 kg & above where boats are not necessary. 55 Turfing with chorkata or durba grass sods 5cm. to 8cm. thick in slope, crest berm etc. of embankments, canals and drainage channels etc. within a lead of 150 metre and all lifts including fine dressing, watering, ramming, guarding etc. complete. (sods will have to be arranged by the contractor at his own cost. Payment to be made on the grown grass only). 56 M.S. work in Rolled steel joists, channels, angles. Tees, plates, Pipes, etc. including hoisting, placing in position including providing staging and removing after completion of works and cutting to sizes as required.100 mm inner dia. Pipe. 57 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 58 25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturers specification followed by two coat of polymer based paint, (1st coat after 4 to 5ays of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface).[Note: - Waterproofing as per item 9, polymer based paint as per item 8 (a) of subhead C of Section (C). 59 Brick work with 1st class bricks in cement mortar (1:4) 60 (a) In foundation and plinth 61 b) In superstructure, ground floor 62 plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] 63 (ii) With 1:4 cement mortar(b) 15 mm thick plaster 64 (ii) With 1:4 cement mortar(a) 20 mm thick plaster 65 (ii) With 1:4 cement mortar(c) 10 mm thick plaster 66 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. 67 Providing and laying reinforced cement concrete pipe NP3 with spigot socket for culverts on first class bedding of granular material in single row including fixing with cement mortar 1:2 as per Technical Specification Clause 1106 for Rural Roads of MORD. 68 600 mm dia 69 900 mm Dia 70 Providing and laying reinforced cement concrete pipe NP4 with spigot socket for culverts on first class bedding of granular material in single row including fixing with cement mortar 1:2 as per Technical Specification Clause 1106 for Rural Roads of MORD. 71 900 mm Dia 72 Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202 for Rural Roads of MORD. 73 (a) Upto 600 mm dia Hume pipe. 74 (b) Above 600 mm to 900 mm dia Hume pipe. 75 Supplying RC spun pipe (NP2) and matching collar as per specificationincluding loading, unloading, carriage and stacking properly at site as per instruction of Engineer in Charge. 76 22.5 cm dia. Pipe 2.00 m long. 77 Matching collar of 22.50 cm dia. Pipe. 78 Labour charge for laying, fitting and fixing in position RC spun pipe (NP2) with collarin canal banks, roads, including caulking the joints of collars as when and necessary with cement mortar (prop. 1 : 2) jute and bitumen etc. as approved including curing, cost and carriage of sand, cement etc. complete (excluding cost and carriage of pipes and collars from Departmental / Manufacturar stack yard). 79 22.5 cm dia. Pipe 2.00 m long. 80 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. 81 Pakur variety 82 Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture]M 25 Grade 83 (i) Pakur Variety 84 Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75kg/sq.m all complete including all materials and labour. In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).Using grey cement 85 (i) 20 mm. thick 86 Precast cement concrete blocks or lining units as per designed section and specification, in nominal Mix. 1:1.5:3 (correspomding to M20 grade) with 20 mm down stone metal aggregate, including dressing, ramming, shuttering,finishing the surface by trowel without adding any additional cement and sand mortar, curing, transporting and laying the blocks or lining units at worksite in position, over sand cushion/filter layer, with cold (paper) joints between the adjacent units, having gap varying from 0 to 5 mm as tolerance, with all leads and lifts, including supply and carriage of all materials complete.Note:- Stone aggregates of pakur varieties. 87 Providing and laying Cement concrete Wearing coat M-30 grade with graded stone chips 19mm down including screening and cleaning approved stone chips and sand as necessary laying, finishing complete to camber and grade, curing with water, including cost and carriage of all materials and hire charges for form work including reinforcement complete as per drawing and Technical Specifications vide clause no. 2702 of MoRT&H’s Specification for Road & Bridge Works. 88 Water Bound Macadam Sub Base by consolidating Jhama metal/ Laterite chelly or stone metal/ shingles of specific size in hard crust to requisite thickness (measured after compaction) in layers including screening of metals etc. as necessary, hand packing, sweeping, watering and rolling in stages with power roller to proper line, grade and camber, lighting, guarding & barricading and making necessary earthen bundh of one metre width on each side where necessary to protect edges and preparing the bed by necessary cutting or filling and rolling all complete including the cost of all materials and hire and labour charges of all men and machineries and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (i) For Construction of Sub Base by consolidating Laterite (90 mm to 45 mm).NB:- 1.Quarry Laterite chelly is considered from Punisole, Dist.-Bankura. 89 Supplying, spreading and consolidating moorum to a depth of 75 mm at desired density and C.B.R. as per specification with power roller to proper gradient and camber including watering as necessary, and lighting, guarding, barricading and making adequate earthen bundh where necessary to protect the edges and curing with water for 2-3 days, mending cracks by rolling where necessary including all incidental charges of roller, cost of fuel & lubricants etc. complete as per specification.(The compaction factor may be taken as 0.67).(The payment is to be made on the basis of the finished compacted volume of moorum).(Quarry for moorum is considered from Punisole, Dist.- Bankura). 90 Brick edging 75 mm wide with picked jhama bricks, laid true to line and level including cutting necessary trench in soil or in hard metalled surface, laying the bricks and repacking the trench (on both side of the edging) with spoils and ramming the same thoroughly complete as per direction. 91 (b) Brick-on-end edging (250 mm) depth. 92 Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturers specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface). 93 Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturers specified rate) for concrete of various grades. 94 Cutting holes and subsequent mending good damages.(a) Diameter upto 150 mm. 95 (ii) In concrete work (plain or R.C.)[Cement- 3.0 Kg/Mtr]. 96 M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. 97 (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. 98 Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. 99 Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.). 100 Dismantling of damaged embedded part like guide channel/bottom seal beam/top seal beam of gates of canal/river from civil structure as directed by the Engineer-in- charge. The costs of man power employed for dismantling and hire charges of Tools and Plant, scaffolding charges etc. Payment will be made on actual length of Guide Channel. 101 Taking out old existing unserviceable damaged gate shutter of canal/ river completely after disengaging from hoisting system completely for installation of new gate shutter. The work includes cutting of gates into suitable pieces by gas cutting, removing the same by mechanical means or suitable crane, stacking all the pieces at the suitable place or as directed by the Engineer in charge up to a lead of 1000 m. The cost includes cost of man power employed for dismantling and cost of consumables like oxygen, acetylene gas, welding rod, hire charges of machineries, like chain pulley block, gas set, grinding machine, welding set, tools & tackles, scaffolding and safety equipment’s etc. including carriage loading & unloading. The cost of complete dismantling of hoisting system & cost of old unserviceable materials handed over to departmental go down including loading & unloading will be provided extra.a) gate Shutter size upto 4.00 sq.m 102 Taking out screw gear rod including its head stock assembly by cutting nuts and bolts from draw shutter of distributories/branch canal/minor canal/channel for replacement/after feeding the canal and handed over to the section office or as directed by the Engineer in charge. The Cost includes cost of Manpower, Cutting, all overheads with all leads and lifts complete. The cost of carraige will be provided extra as per actual basis based on PWD Schedule of Rates. 103 Fabrication , supply, erection and commissioning of embeded parts consisting of seal beam, Guide channel with all accessories for vertical gate of canal/river made of MS material consisting of angle, channel, beam, plate, flat, etc. conforming to IS : 2062 - 2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting, ligning, nchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting).Remarks: Cost for civil works to be taken from PWD (R) directorate seperately. 104 i) Insert plate welded with J hook 105 ii) Seal beam 106 iii) Guide channel/Guide path/Top seal path 107 Fabrication , Supply, erection and commissioning of new Slide type vertical lift regulator service gates of Canal/River as per IS: 5620 - 2000/Latest Revision consisting of skin plate, vertical and horizantal grider, stiffener etc. made of MS material consisting of angle , channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting, ligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting). 108 i) Width of Gate shuteer size upto 2 metre 109 Supplying, fitting & fixing of screw hoisting arangement made of MS bottom plate, top plate, coller with necessary holes on base plate and top plate to accomodate thrust bearing of suitable size as per approved drawing & design and as per direction of Engineer in charge. The cost includes cost of ms plate as per IS : 2062 ‐2011/ latest revision, man power employed for dismantling and fitting fixing, consumables like cutting tools, bolt & nuts of required size, hire charges of machineries, like lathe/shaping machine, grinding machine, drilling machine, tools & tackles etc including carriage loading & unloading but excluding the cost of lifting Nut/Bush, thrust bearing & wheel supplied seperately. 110 Supply of bearings. 111 Bearing no.51216 (SKF)(Thrust bearing) 112 Supplying, fitting & fixing M.S fabricated wheel in the screw hoisting system for lifting or lowering the draw shutter.The wheel consisting of suitable size ms hub to accomodate any size of G.M/C.I nut. The rim and four nos arm of wheel are made of 25mm. to 36mm. dia m.s rod complete as per direction of the Engineer‐in‐charge. The cost includes cost of materials, man power employed for dismantling and fitting fixing, consumables like cutting tools, welding rod, hire charges of machineries, like bending machine, lathe machine, grinding machine welding set, tools & tackles etc including carriage loading & unloading. 113 Upto 60 cm dia. MS wheel 114 Supplying, fitting & fixing of screw rod having square thread of 1.5/2 T.P.I, Material bright steel [EN‐8/EN9/forged Cl‐4 (45C8) as per IS :1875 1992/latest Revision]. dia and thread length as required and providing with a drilled hole of required dia on the other end after flattened and supplying with one no. bolt and nut of required size and all other components as required as per direction of Engineer‐In ‐ Charge. The cost includes cost of material, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles, grease, mobil etc including carriage loading & unloading as per direction of Engineer in charge. 115 a) upto length 3 metre. 116 Supplying, fitting & fixing Gun Metal Nut as per requirement having 1.5/2 T.P.I square thread for screw gearing arrangement, perfectly metting with the screw rod/gear rod for lifting the draw shutter as per direction of E.I.C. The cost includes cost of materials, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles etc including carriage loading & unloading. 117 Surface cleaning of metal surfaces by chemical cleaners and then by hand with emary paper, wire brush and power tool cleaners and removing dust and preparation of surface including cost of all materials, labour, machinery, scaffolding, etc., complete with initial lead for sand upto 1 km and all lifts. 118 Painting of embedded parts, all types of gates, stop logs and bar screen/ gratings etc. on prepared surfaces with one coat of inorganic zinc silicate primer (airless spray preferred)70+/ - 5 micron and two super coats with a total thickness of 300 microns (each 150+/- 5) of solvent less coal tar epoxy paint each coat 150 microns ( total 300 microns) including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts.. 119 Supply and fabrication of new stainless steel plate/flat (AISI - 304) of suitable size on seal beam / roller track/ slide track/ side seal seats/ top seal seat by welding (SS) as per direction of the Engineer- in-charge including cost of Materials, Machineries, Manpower, Cutting, aligning, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification. 120 Cost for supplying and fifling fixing of angle type rubber seal (Make: Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/ S B Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate as per direction of E.I.C. The cost includes cost of man power employed for dismantling & fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer. 121 b) size: (75 x 75mm) x14mm(thick) 122 Supplying of M.S flat for clamping Rubber seal with hole as per direction of EIC. 123 Supplying of M.S bolts with nut for clamping Rubber seal as per direction of EIC. 124 Testing charges of structural steel material according toIS 2062 - 1999& Testing charges of rubber according to IS : 18555 - 1986 Before fitting fixing of all materialto be placed before E.I.C for inspection.All test certificate should be submitted by the firm berore fitting fixing test will be made by Govt approved Lab. 125 Cost of transportation of materials to the site and shifting the scrap materials to the KMD office godown including loading and unloading at both end etc. to complete the job at site as per direction of E.I.C.
Contract Date: Nov 01, 2025 Contract Value : ₹ 5.92 Crore
Government Departments No of Bidders 5
West Bengal View Result →
7.
Defence #5071752 AOC
Supply Of Raw Materials Required For The Manufactory Sections In Various Prisons Across Tamilnadu For The Year 2024 2025 Supply Of Raw Materials And Other Miscellaneous Articles Required For The Manufactory Sections In Various Prisons Across Tamilnadu For The Year 2024 2025 , Central Prison-I, Puzhal Group : B - Other Miscellaneous Articles , Disposable Shaving Razor , Central Prison-I, Puzhal Group : C - Weaving Industry , 2/17S Yarn [Cotton] In Cone - Bleached , 20S Yarn [Cotton] In Cone - Bleached , Central Prison-I, Puzhal Group : D - Book Binding Industry , Card Board -2½ Lbs , Varnished Marble Paper , Khaki Craft Paper , Tapioca Flour , Copper Sulphate , Calico , White Paper , ½ White Tape , Sand Paper , 10S Thread , Glue (Vajjiram) , Card Board- 2 Lbs , Central Prison-I, Puzhal Group : E - Tailoring Industry , Pencil Black , 80S White Polyester Cotton Thread - 300 Mtrs , 80S Khaki Polyestercotton Thread - 300 Mtrs , White Nylon Button 4 Holes , 60S Overlock Polyester Cotton Thread , 40S Overlock Polyester Cotton Thread , 40S Polyester Cotton Reels White - 300 Mtrs , Khaki Colour Coat Button (As In Praga Brand Or Equivalent) With 4 Holes , White Colour Coat Button (As In Praga Brand Or Equivalent) With 4 Holes , Rain Coat Cloth (Khaki Colour) , Rain Coat Cloth (White Colour) , Thread Graphic 4 Ply (As In Madura Coats Or Equivalent ) , Plastic Buckles - Khaki , Plastic Buckles - White , Reflective Tape White / Orange Colour , Candle , Flourescent Screen Printing As Police In Orange Colour , Velcro 1 , Central Prison-I, Puzhal Group: G - Tag Industry , Gi Sheet , Ribbon Of Colours , Central Prison-I, Puzhal Group : H - Sealing Wax Industry , Rosin , Shelloc Red , Red Vermillinpowder , Chalk White Powder , Firewood , Castor Oil , Central Prison-I, Puzhal Group: K - Shoe Polish Industry , Shoe Polish - Black , Shoe Polish - Dark Tan (Dark Brown) , Logo Printed Pressing Type Polish Container (Material Tin) , Aluminium Foil , Flat Plastic Winding Chord , Press Clip , Hand Gloves , Mask Equivalent To N95 , Brown Adhesive Tape Roll , Corrugated Boxes (345 X 345 X 310 Mm) -5Ply , Central Prison-I, Puzhal Group : M - Printing Press Unit , Chart Paper - Mg Maplitho , Ink Black , Ink Meganda , Ink Cyan , Ink Royal Blue , Gp Plate Cleaner , Ultra Font , Plate Delete Equivalent Technova , Ink Knife , Reducer , Cellulose Sponge , W. Wash , Benzeen , Gear Oil , Domponing Cloth , Central Prison-I, Puzhal Group : V - Mosquito Net , Mosquito Net Cloth - 135 Cm Width , 80S Khaki Polyestercotton Thread - 300 Mtrs , Central Prison-Ii, Puzhal Group : B - Other Miscellaneous Articles , Disposable Shaving Razor , Central Prison, Vellore Group - A : Industrial Spare Sub Group - A1 : Weaving Industry Spare , Shuttle , Picker , Buffer , Healds , Pirns 7 , Picking Band , Picking Stick , Picking Spindle , Shuttle Box Spring , Check Strap , Nylon Rope , Central Prison, Vellore Group - A : Industrial Spare Sub Group -A2 : Boot Industry Spares , Pincers (Boot Industry) , Shoe Hammer , Chucklers Knife , Bobbins Weaving , Engine Oil , Grease , Hydraulic Oil , Belt Cutting Knife , Teflon Roller For Belt Cutting Machine , Skiving Machine Belt Knife , Clicking Machine Teflon Board , Shoe Box , Shoe Pairing Thread , Nylon Thread For Belt Tying , Emery Sheet For Full Shoe Making Machine , Skiving Machine Grinding Stones , V Belt For Stitching Machine , Old News Paper , Teflon Cloth For Mulling Machine , Felt Sheet For Mulling Machine , Bladder For Sole Pressing Machine , Halogenation Tube , Central Prison, Vellore Group - A : Industrial Spare Sub Group -A3 : Book Binding Industry Spares , Paper Cutting Blade , Central Prison, Vellore Group- B : Other Miscellaneous Articles , Disposable Shaving Razor , Jute Twine , Hessain Cloth , Polythene Paper , Central Prison, Vellore Group- C : Weaving Industry , 2/17S Yarn [Cotton] In Cone - Bleached , 20S Yarn [Cotton] In Cone- Bleached , Central Prison, Vellore Group -D : Book Binding Industry , Card Board - 2½ Lbs (13½X 9) , Varnished Marble Paper , Khaki Craftpaper , Tapioca Flour , Copper Sulphate , Calico , White Paper , White Tape , Sand Paper , 10S Thread , Glue (Vajjiram) , Card Board - 2 Lbs , Central Prison, Vellore Group -F : Carpentry Unit , Wood Adhesive , Sand Paper ( S ) , Sand Paper ( R ) , Turpentine , G.T.Polish , Nails - 1 , Nails - 1 ½ , Screw - 1 , Screw - 1 ½ , Screw - 2 , Nylon Wire , Sand Paper Disc , Bee Wax , Bush , Thinner , Central Prison, Vellore Group - N : Boot Industry Central Prison, Vellore Sub Group : N1 - Black Shoe For Men Specifications For Leather Cut Components For Black Leather Shoes With Tpr Bottom Sole , Central Prison, Vellore Sub Group - N2 : Brown Shoe For Men Specifications For Leather Cut Components For Brown Leather Shoes With Tpr Bottom Sole , Central Prison, Vellore Sub Group - N3 : Black Ammunition Boot Specifications Of Leather Cut Components For Black Ammunition Boots With Tpr Bottom Sole , Central Prison, Vellore Sub Group - N4 : Brown Ammunition Boot Specifications For Leather Cut Components For Brown Ammunition Boots With Tpr Bottom Sole , Central Prison, Vellore Sub Group - N5 : Brown Zip Boot Specifications For Leather Cut Components For Brown Zip Boot With Tprbottom Sole , Central Prison, Vellore Sub Group - N6 : Black Shoe For Women Specifiations For Leather Cut Components For Black Leather Shoes Withtprbottom Sole For Women , Central Prison, Vellore Sub Group - N7 : Brown Shoe For Women Specification For Leather Cut Components For Brown Leather Shoes With Tpr Bottom Sole For Women , Central Prison, Vellore Sub Group - N8: Manufacturing Of Leather Cut Components , Brown Upper Leather , Toe Plain Leather , Sole Cleaning Solvent , Full Shoe Adhesive 1 , Full Shoe Adhesive 2 , Shoe Lasting Adhesive , Socks Adhesive , Central Prison, Vellore Sub Group : N9 - Manufacture Of Uniform Belts , Kattai Leather - Even Thickness 3 Mm. , Buckles For Police Contables , Buckles For Police Contables (Chennai City Police) , Buckles For Officers - Police, Fire, Prisons , Buckles For Cross Belt , Buckles For Prison Warders , Buckles For Prison Officers , Buckles For Fire Officer , Central Prison, Vellore Sub Group : N10 - Raw Materials Required For Manufacturing Shoes & Boots , Black Upper Polish , Brown Upper Polish , Black Shoe Lace , Black Shoe Lace For Boot , Brown Shoe Lace , Brown Shoe Lace For Boot , Air Staples Pins Gi 97/12 , Air Staples Pins Gi 98/12 , Black Wax Nylon Thread , Hardener , Ball Revit Screw Type (Steel) , Rivit Button 9 Mm & 7 Mm , Central Prison, Cuddalore Group A : Industrial Spares Sub Group A1 : Weaving Industrial Spares , Shuttles Of Sizes , Chrome Picking Band , 4B Nylon Pickers , Picker Bush No.2 , Shuttle Box Spindle , Machine Oil , Shuttle Box Spindle Temple Plate , Leather Belt , Round Rope Of Pickers , Shuttle Box Whole Bottom Bolt & Nut , White Nylon Gunny Bags , 32 Nos. X 54 Read , 40 Nos. X 54 Read , Pick Wheel Adjustment Lever , Beam Pipe , Shuttle Kambam , Shuttle Clip , Box End Spring , Picking Powl , Spring Picking , Winding Spindle , Winding Oost Collar , Read Spring , Spring , Pirns , Aluminum Held Frame , Nylon Buffer , No.32 Pick Wheel , Mul Role Size , Central Prison, Cuddalore Group A : Industrial Spares Sub Group A2 : Tailoring Machine Spares , Tailoringmachine Needle (Brass ) Size 110/18 , Tailoringmachine Needle (Brass ) Size 110/16 , Tailoringmachine Teeth , Tailoringmachine Foot , Tailoringmachine Plate , Tailoringmachine Belt , Tailoringmachine Tension Spring , Tailoringmachine Bobbin , Tailoringmachine Case , Tailoring Machine Shetle , Tailoringiron Box Heavy Belmont , Tailoringemming Machine Needle 110/18-110/16 , Post Bed Machine Needle No 140/22 , Post Bed Machine Needle No160/22 , Post Bed Machinebobin Case , Tailoring Scissors 12” (Steel) , Tailoring Scissors 10” (Steel) , Tailoring Scissors (Plastic Handle) 10 , Tailoring Drimmer , Tailoring Nose Player , Cloth Cutting Machine H.S.S. Blade , Cloth Cutting Machine Round Stone , Cloth Cutting Machine Carbon , Cloth Cutting Machine Gear Set , Eyelet Punch , Leathercutting Knife , Leather Cutting Knife Blade - 20 Cm , Leather Cutting Knife Blade- 10 Cm , Kithon Gunney Bag , Tailoring Emming Needle 7.5 Cm , Tailoring Emming Needle 12.5 Cm , Cloth Cutting Machine Belt 120 Xl , Cloth Cutting Machine Belt60 Xl , Cloth Cutting Machine Greeze , Cloth Cutting Machine Wheel Set , Post Bed Machine Belt No.220 Xl , Leather Cutting Machine Bush , Post Bed Machine Shetle , Central Prison, Cuddalore Group A : Industrial Spares Sub Group : A3-Carpentry Unit Spares , Planning Machine Tip Blade , Planning Machine Tip Blade , Hand Planning Machineblade , Planning Machine Belt , Wood Cutting Blade , Grinding Stone , Wood Cutting Machine Blade , Drill Bit , Star Bit , Round Emery Sheet 5” No.80 , Round Emery Sheet 5” No.120 , Metal Paste , Sheeler , Paint , Star Screw , Brush 2” , Brush 1” , Band Saw Machine Blade Length 23’ Breath3” , Band Saw Machine Blade Length 33’ Breath 3” , Band Saw Machine Belt 70” , Red Acid , Hand Planning Machine Blade , Wood Turning Lathe Chisel , Rubber Band , Central Prison, Cuddalore Group - B: Other Miscellaneous Articles , Disposable Shaving Razor , Central Prison, Cuddalore Group - C : Weaving Industry , 2/17S Yarn [Cotton] In Cone - Bleached , 20S Yarn [Cotton] In Cone - Bleached , Central Prison, Cuddalore Group : F - Carpentry Unit , Indian Teak Wood-Width Oues 25 Mm Upto And Inclusiveof 155 Mm , Indian Teak Wood - Width Oues 155 Mm Upto And Inclusive Of 230 Mm , Indian Teak Wood - Width Oues 255 Mm Upto And Inclusive Of 330 Mm , Indian Teak Wood - Width Oues 330 Mm Upto And Inclusive Of 410 Mm , Drawer Lock (Brass) , Shelf Lock (Brass) , Screw - 12 Mm , Screw - 15 Mm , Screw - 20 Mm , Screw -30 Mm , Screw - 35 Mm , Wire Nailsof All Sizes , Hinges (Keel) - Iron Nickel Plate , Khanji Hook , Sand Paper , Sand Disk , Wood Adhesive , Bees Wax , Cocount Fibre , Turpentine , Pin Nail Of All Sizes , Nylon Wire , G.T.Polish , Ply Wood - 6 Mm , Ply Wood - 10 Mm , Ply Wood - 19 Mm , Laminated Sheet Of Colours , Quick Fix (Sr) - 998 , Fevicol , Tower Bolt - 3 Inch , Tower Bolt - 4 Inch , Tower Bolt - 6 Inch , Tower Bolt - 8 Inch , Bush - ½ Inch , Bush - ¾ Inch , Bush - 1 Inch , Bush - 1 ¼ Inch , Bush - 1 ½ Inch , Bush - 2 Inch , Bush - 2 ½ Inch , Design Beading - 3/4 Inch , Roller Beading 2 Inch , Handle (Brass) - 3 Inch , Handle (Brass) - 4 Inch , Handle (Brass) - 6 Inch , Arabite , Pinckeel (S.S. Type) - 1 Sq. Ft. , Mirror - 4 Mm , Mirror - 5 Mm , Cot Clamp Set , Central Prison, Cuddalore Group: O -Cap Industry , Blue Colour Tc Cloth , Rexine - Brown Colour , Leather (Light Brown/Black Colour) , Kithan Coney , 1½ Lb Fibre Sheet , Polythene Thick Paper , Eyelets - Black Coated , Sponge 10 Mm , Nickle Emblem Button , Gum Packet , Piping Thread , No. 40 Nylon Thread- 1500 Metres , Bale Thagadu , Lining Cloth , Velvet Cloth , Multi Grip Sr 97 (Synthetic Rubber Adhesive Foot Wear) , Brass Dress Hook , Polythene Cover (For Packing Uniform Caps) , Packing Tape Roll - 2 Width, Glass White, Cello Tape , Iron String , Thread - (Blue/Red/Khaki) 150 Metres , Nylon Yarn (Narambu) Yellow Colour , Carton Box (For Packing) (Size:630Mm X 600Mm X 450Mm) , Plastic Shade - Used In Stitching Uniform Caps , Tailoring Machine Oil , Pencil (White) , Tailoring Marker Permanent Pen , Black Polyester Thread ( 1500 Mtrs) 3 Ply , Red Cotton Rope , L Sheet 2Mm , Deece , Blue Plastic Ribbon , Military Cloth , Hood (Ash, Black, Maroon, Khaki, Blue) , Cotton Pad , Dori , Lupe , Ribbon - Black , Tahpta (Silk Cloth) , Tapioca Flour , Black Net , Central Prison, Cuddalore Group: P - Lathi With Thong Industry , Bamboo (Cane) Lathi (Radon Variety) , Peril (Brass) , Thong Kattai Leather , G.T. Polish (Wood Polish) , Synthetic Rubber Adhesivemulti Grip Band - Al 905 , Sand Paper , Central Prison, Trichy Group A : Industrial Spares Sub Group : A1- Weaving Industrial Spares , Weaving Shuttle 14 ½ For Power Looms , Wire Heels (Bandage & Gauze Cloth Making) , Wire Heels (Cumbly Making) , Steel Reeds (Bandage & Gauze Cloth Making) , Steel Reeds (Cumbly Making) , Picker Kattai , Picker Kattai Bush , Picker Steel Rod , Weft Pin , Bobbins Of Sizes 4 ½ X 3 ½ , Hand Leather , V. Belt A.86 , V. Belt A.88 , Meter Scale (Brass) , Nylon Rope , Wooden Hand , Monkey Tail Lever And Bush , 8 Picking Bowl Bolt , Picker Soft Wheel 1 1/2 , Shuttle Stick , Reed Spring 12 , Leather Belt 1 , Box End Spring , Weft Pin Needle , Compound Wheel Stud , Quadrant Bracket Rh, Lh , Cloth Roll Spring , Warping Beem Pipe Set , Crank Arm Pin Bit , Crank Soft Gm Baring , Picking Spring , Starter With Breaker , Beam Cup Bracket Rh, Lh , Picking Nose Rh, Lh , Picking Plate Rh, Lh , Stop Rod Spring , Cloth Roll Plate , Oscillating Lever Rh, Lh , Oscillating Cam , Plain Two Thread Top Pet , Cotton Pin , Compound Wheel 89T , Warping Beem Stand , V- Belt A57 , Treadle Lever, Bowl, Bowl Pin , Break Wheel, Shoe , Change Wheel 50T , Cannon Bracket Rh, Lh , Beam Reffles , Tappet Shaft Stay And Bush , Bolt Nut Different Size (¾, 1, 1½, 2½, Etc., ) , Motor Fan 1 Dia , Central Prison, Trichy Group A : Industrial Spares Sub Group : A2- Tailoring Industrial Spares , Sewing Needle - No.18 , Sewing Oil , Needle Stem , Needle Plate , Shuttle , Bobbin (Silver) , Horse Pedal , Bobbin (Case) , Horse Pedal Rod , Motor Belt , Motor Condenser , Scissiors 10 , Scissiors 12 , Iron Box (Brass) Branded , Oil Seal (Brother Machine) , Overlock Needle , Overlock Looper , Kaja Needle , Central Prison, Trichy Group A : Industrial Spares Sub Group : A3- Soap Industrial Spares , V Belt B62 , V Belt B63 , V Belt B55 , V Belt B66 , Gear Box Oil 90 , Gear Greeze (Yellow Colour) , Different Shape Dye(Soap Weight 75 Grams) , Iron Bucket 12 , Iron Bucket 14 , Central Prison, Trichy Group A : Industrial Spares Sub Group : A4- Binding Industrial Spares , Gear Box Oil , V Belt B72 , V Belt B105 , Paper Cutting M/C Blade , Paper Cutting M/C Blade , Paper Cutting M/C Blade , Central Prison, Trichy Group : B - Other Miscellaneous Articles , Char Coal , Soda Ash - Washing Soda , Dhoby Blue , Jute Twine , Hessain Cloth , Disposable Shaving Razor , Central Prison, Trichy Group : C - Weaving Industry , 2/17S Yarn [Cotton] In Cone -Bleached (Cone Weighing 1 Kg) , 20Syarn [Cotton],In Cone -Bleached (Cone Weighing 1 Kg) , Woollen Yarn -Blue , Woollen Yarn - White , Woollen Yarn - Red Colour , Woollen Yarn - Green Colour , Woollen Yarn - Yellow Colour , Central Prison, Trichy Group : D - Book Binding Industry , Card Board - 2½ Lbs (13½X 9) , Varnished Marble Paper , Khaki Craft Paper , Tapioca Flour , Copper Sulphate , Calico , White Paper , ½ White Tape , Sand Paper , 10S Thread , Glue (Vajjiram) , Cardboard - 2 Lbs (3 X 2) , Central Prison, Trichy Group : F- Carpentry Unit , Indian Teak Wood - Width Oues 25 Mm Upto And Inclusiveof 155 Mm , Indian Teak Wood - Width Oues 155 Mm Upto And Inclusive Of 255 Mm , Indian Teak Wood - Width Oues 255 Mm Upto And Inclusive Of 330 Mm , Indian Teak Wood - Width Oues 330 Mm Upto And Inclusive Of 410 Mm , Drawer Lock , Shelf Lock , Screw -12 Mm , Screw -15 Mm , Screw -20 Mm , Screw -30 Mm , Screw -35 Mm , Wire Nails Of All Sizes , Hinges (Keel) , Khanji Hook , Sand Paper , Sander Disk , Wood Adhesive , Bees Wax , Cocount Fibre , Turpentine , Pin Nail Of All Sizes , Nylon Wire , Wood Polish , Ply Wood - ¾ , Ply Wood - 6 Mm , Ply Wood - 10Mm , Laminated Sheet Of Colours Sun Glass Mica 1Mm , Quick Fix (Sr) , Central Prison, Trichy Group : O - Cap Industry , Hood (Khaki & Blue) , Thread - Khaki & Black 150 Metres , Tahpta (Black Silk Cloth) , Cotton Pad , Dori (Black Rope) 1/4 Dia , Lupe 2 ½ X 1 ¼ , Ribbon - Black 1 , Eyelets , Polythene Cover (For Packing Uniform Caps) , 44 Blue Drill Cloth Cotton With Polyster , Thread - Blue 150 Metres , Zip - No.8 Blue , Runner - No.8 Blue , Blue Drawer Button , Sticker (Size) , Central Prison, Trichy Group : Q - Soap Industry Sub Group : Q1 - Soap Industry - Washing Soap , Silicate Ofsoda , Rosin , Soap Yellow Powder , Illuppai Oil , Castor Oil , Neem Oil , Coconut Oil , Caustic Soda Flakes , Fire Wood , Salt , Central Prison, Trichy Group : Q - Soap Industry Sub Group - Q2 : Toilet Soap Industry , Premium Soap Noodles , Talc 500 Mesh , A.O.S. Paste (Alpha Olefin Sulfonate Paste) , Different Colour Of Powder , Liquid Perfume (Different Flavour) , Packing Box For Soap With Printing (16 X 12) , Glue Construction 2 Cello Tape, White Glass Colour , Carton Box (120 Gsm) (13X106) 3 Ply , Central Prison, Trichy Group : Q - Soap Industry Sub Group - Q3 : Detergent Soap Industry , Acid Silury , Sodium Poly Phosphate , Dolamate Powder , Calcite Powder , China Clay Powder , Aluminum Sulphate , Iti Blue Colour , Soap Packing Paper With Printing , Carton Box (120 Gsm) (15X106) 3 Ply , Central Prison, Salem Group : A - Industrial Spares , Weaving Shuttle , Wire Heelds , Read Spring , Picking Arm Spring , Spindle Stud Nylon , Spindle , Spindle Stud Bolt , Weft Fork (Left & Right) , Shuttle Tunk , Picking Powl Bolt , Picking Powl , Picking Arm , Picking Nylon Strap , Box End Spring , Cheek Strap Bolt , Weft Grid (Right & Left) , Perforated Steel Strips , V - Belt , Picker , Pirn , Buffer , Yellow Grease , V- Belt For Compressor A - 50 , Grinding Wheel Dia 12 X 1 1/2 Thickness (Rough) , Grinding Wheel Dia 12 X 1 1/2 Thickness (Medium) , Air Compressor Oil (Viscosity 20W X 40) , Mask (Industrial Use) Equalant To N 95 , Carbon Bush Gws 24 - 180 Jz, 180Mm (Angle Grinder) Ag 7 , Pilot Spray Gun No.64 , Welding Holder , Welding Shield With Glass Standard Size Set Of 3 Glass (German Glass 1, White Glass 2) , Welding Flexible Copper Single Cable , Pvc Compressor Air Hose Flexible Pvc / Polumers Inner Dia Meter - 8Mm Outer Dia Meter - 19Mm (Or) 3/4 Inch , Coconut Oil , Steel Reads Of Sizes 36S, 32S Indian Make , Swal Spring , Running Mess , 12 Rubber Cut Field Belt , 10Mm Packing Rope , Blue Mess , 2 1/2 Bearing With Shield Type , 3 Bearing With Shield Type , 3 1/4 Bearing With Shield Type , Mobile Oil ( Heavy Viscosity) , Central Prison, Salem Group : B - Other Miscellaneous Articles , Disposable Shaving Razor , Hessain Cloth , Jute Twine , Central Prison, Salem Group : C - Weaving Industry , 2/17Syarn [Cotton]In Cone - Bleached , 20S Yarn [Cotton] In Cone - Bleached , Central Prison, Salem Group : D - Book Binding Industry , Card Board - 2½ Lbs , Varnished Marble Paper , Khaki Craft Paper , Tapioca Flour , Copper Sulphate , Calico , White Paper , ½ White Tape , Sand Paper , 10S Thread , Glue (Vajjiram) , Fire Wood , Card Board - 2Lbs , Central Prison, Salem Group : T - Black Smithy Industry , Gi Wire 10G (Galvanised Iron) 3.25 Mm , Emery Cloth Of Grades , 10G Welding Electric Rods , 12 Flat Files , Charcoal , Paints Of Colours (Equivalent To Delux) , Bp Sheet 10 G (Or) 3 Mm , Cr Plain Sheet - 16 G Or 1.63 Mm , Cr Plain Sheet - 18 G Or 1.22 Mm , Ms Channel - 35Mm X 70Mm X 35 Mm , Ms Angles 1 X 1 X ¼ , Ms Angles 1 X 1 X ? , Ms Angles 35Mm X 35Mm X 5Mm , Ms Flat - 1 X ? , Ms Round - Dia ¼ , Ms Round - Dia ? , Ms Round - Dia ½ , 24 Gor 0.56 Mm G.I.Sheet , Thinman Rivites No.12 - Iron , Kniffing Paste Filler (Patti) , Cr Pipe- Dia 18 G -1 , Cr Pipe - Dia 18 G-? , Hinges - 50 Mm , Hinges-75 Mm , White Metal Primer , Thinner , Bolt & Nut-¾ X ? , Bolt & Nut-1 X ? , Bolt & Nut -3 X ? , Bolt & Nut -4 X ? , Painting Brush - 20 Mm , Painting Brush - 30 Mm , Painting Brush - 60 Mm , Painting Brush - 75 Mm , Nylon Bush - (Black / White Colour) (Or) Rubber Bush (White Colour) , L Angle Bush Nylon Bush Innersizes 1 X 1 X 1/8 , 2 Trolley Ball Type Wheel7/8 Pillar Type , 4 Trolley Wheel 7/8 Pillar Type (Length Of Sizes) , Goggles , Drill Bit Of Sizes3/16 , Drill Bit Of Sizes¼ , Drill Bit Of Sizes? , Drill Bit Of Sizes½ , Drill Bit Of Sizes11mm , Sandar Disc 7 , Hacksaw Blade ½ , Hand Gloves (Leather Set) , Goggles (Leather) Grinding Purpose Standard Size , Central Prison, Salem Group - U: Stainless Steel Industry , Stainless Steel Coil Sheet , Fibre Wheel - 2 ½ Dia X 2 Thickness , Fibre Wheel -3 Dia X 2 Thickness , Fibre Wheel3 Dia X 3 Thickness , Fibre Wheel Dia 1, 2 & 4 To 12 , Stainless Sheet Circle , Mob Circle (Cloth Wheel) 2 ½ Dia X 2 Thickness , Mob Circle (Cloth Wheel) 3 Dia X 2 Thickness , Mob Circle (Cloth Wheel) 3 Dia X 3 Thickness , Mob Circle (Cloth Wheel) Dia 1, 2 & 4 To 12 , Emery Soap , Green Soap , Chalk Powder , Packing Cover , Rubber Rolling Sheet , Stainless Steel Coil Sheet For Mugs Handle , Welding Rod - Stainless Steel 10 G , Welding Rod - Stainless Steel 12 G , Lubricant Oil , Corton Box(2 X 3 X 2) , Cutting Tool Bit For Turning Machine And Spinning Machine , Hand Gloves - Leather , Central Prison, Coimbatore Group : A - Industrial Spares Sub Group : A1 - Weaving Industrial Spares , Picking Bowls With Stud Bush And Nuts , Spindle Studwith Bolt And Nut , Pin For Crank Arm , Zip For Crank Arm. , Gun Metal (Bush) Steps For Crank Arm , Treadle Bowls With Centre Pin , Tappets Plain , Weft Forksleft And Right , Shuttle Box Spindles 21 , Shuttle Box Spindles 22 , Perforated Steel Strips - 10/21 Size , Leather Lace , Chrome Picking Band , V. Belta .70 , V. Belt A 73 , Leather Belting Of Sizes , Leather Belting Of Sizes , Shuttles Of Sizes , No Volt Coil Lt / Lktype Mk 1 -400To440 Volts , Aluminium Heald Frames Of Sizes , 6 Weft Pirn , All Metalreed With Adopters 56S X 45 , Warp Stop Motion Droppers (0.8 X 11 X 125) , Noigen Wsl , Anilose E , Mutton Tallow , Goshnol , Carboxy Methylcellulose M Vb , Preservative Bdm , Gum Cesaltex , Alfloc Powderno.101 , Alfloc Powder No. 28 , Technopal , Compal R 300 , Machinery Oil , Synol , Synthosize , Synthowet Oil , Shuttles Of Sizes , Drawing Hooks , Shuttle Pegs , Shuttle Clips (Flat Type) , Shuttle Clips (Wire Type) , Spring Picking , Shuttle Tongue , Servo System 100 Oil , Leather Belting Of Sizes , Carded Belt Hooks No.5 , Nylon L Brackets For Check Straps , Picking Sticks-72Cm , Picking Sticks-78 Cm , Transformer Oil , Asbestos Rope ½ , Graphite Rope ½ , Steel Reeds Of Size 40S X 80 , Steel Reeds Of Size 28S X 90 , Steel Reeds Of Size 40S X 90 , Steel Reeds Of Size 80S X 45 , Steel Reeds Of Size 44S X 80 , Steel Reeds Of Size 40S X 45 , Colour Crayons , V Belt A 75 , V Belt B 49 , S Type Nylon Buffers White , Nylon Pickers 4B White , Wire Healds 27G , Nylon Threaded Bush For Nylon Pickers , Picking Nose, Shell Boss With Bolts & Nuts , 7 Wheel Takeup Motion Complete Set Heavy Type , Contractor 32 Amp230 V Coil , Johnson Head Complete Assemble 1 H Sbf 3400/ Rhp 3400 Greames , Gear Tac Oil300 S , Servo System 32 , Hydraulic Oil , Servo Gem 2 , Shuttles - K Type , Shuttle Jaw , Shuttle Eye , Shuttle Tension Pin , Shuttle Screws , Shuttle Guide Pin , Weft Pirns For Ruti-C , Picker Haag , Double Lug Scrap , Long Lug Strap , Entry Roller , U Buffer , Anaband , Weft Tensioner , Zama Buffer Head , Zama Diaphram , Rubber Wiper Ring , Synthetic Ring , Steel Ring , Air Inlet Valve , Front Wall Leather -All Type , Picking Stick Wooden , Lugstarap Insert , Shift Lever Right/Left , Clamping Bush -10 Mm , Clamping Bush -12 Mm , Feeler Needle , Inside Weft Needle , Feeler Box , Shift Lever Spring Left/ Right , Picking Stick Spring - Left/Right , Reed Adopter , Perforated Steel Strips , Reeds For Ruti - C Looms , Heald Wires Forruti - C Looms , Droppers For Ruti-C Looms , Picking Wheel Shaft R , Warp Beam Bearing , Spur Gear 2.5 Z 29 , Ratchat Wheel Z 38 , Ratchat Wheel Z 62 , Cam Follower , Temple , Bevel Gear 3 Z 28 , Swing Arm Assembly , Picking Lever , Picking Stick Carrier , Box Plate Front , Picking Stick Guide F.L. Br , Sley Sward , Limiting Lever Carrier , Magnet Dc , Break Drum Head , Reversing Disk , Front Plate , Picking Wheel , Heald Frames For Ruti-C Looms , Leno Belt , Selvedge Cutter , Stable Hooks , Reeds , Air Hoses , Temple , Compressor Oil (Synthetic) , Separator , Air Filter , Oil Filter , Compresser Belt , Ball Joint Sf 12 , Pawl Spring , Pawl Rod , Square Support , Cap Screw (10*30) , Activating Rod , Swing Arm Bracket , Harness Frame Cable , Hex Head Screw (14*50) , Grease Nipple No.18 , Grease Nipple No.78 , Torsion Spring (Right & Left) , Picker , Picking Stick Lining , Tongue Roller & Bush , Bearing Bush , Hex Head Screw(6*8) , Cylinder Bush No.16 , Hex Head Cap Screw (6*18) , Spring Washer No.6 , Tension Rail Assly , Hex Head Screw (10*25) , Flat Spring , Needle Bearing Bush , Grub Screw 8*8 , Hex Head Screw 5*18 , Spring Tentioning Bush , Spacing Ring , Stopping Finger , Micro Switch , Bevel Gear 70T , Bevel Gear 28T , Starting Lever With Handle , Activating Lever Bearing , Needle Bearing Hr 2216 , Beam Shaft , Crank Wheel , Sley Profile , Sley Stiffner , Washer , Spacing Plate , Head Screw Hex (10*70) , Piston , Cable Clamping Full Set , Central Prison, Coimbatore Group : A - Industrial Spares Sub Group : A2 - Tailoring Industrial Spares , Bobbin , Bobbin Case , Overlock Machine Needle , Tailoring Belt , Singer Machine Needles , Kaja Machine Needles , Pressure Foot (Horse) , Singer Oil , Shuttle (Juki Sewing Machine) , Teeth Plate , Bobbin Loader (Juki Sewing Machine) , Power Switch (Juki Sewing Machine) , Pedal Setting Sheet , Tension Sheet , Button Machine Capture (Juki Machine) , Kaja Machine Blade 1 , Kaja Machine Blade 1 1/2 , Button Machine Tension Sheet , Button Mahine Cutter , Over Lock Machine Blade , Kaja Machine Bobbin Case , Scissors 10 , Scissors 12 , Mending Cutter , Central Prison, Coimbatore Group : A - Industrial Spares Sub Group : A3 - Book Binding And Paper Making Industries Spares , Roller Ball Bearing 3 , Motor Rope , Grease , Nylon Mesh 40 , Bearing , V.Belt - B 94 , Packing Seal , Oil Seal , Gear Oil , V Belt B45 , Woolen Mat , Mould Mat , V Belt B119 , V Belt B118 , V Belt B 71 , Tyre Coupler , Central Prison, Coimbatore Group : B - Other Miscellaneous Articles , Char Coal , Jute Twine , Hessain Cloth , Polythene Paper , Packing Rope Of Cotton , Disposable Shaving Razors (For Issue To The Male Prisoners) , Central Prison, Coimbatore Group : C - Textile & Weaving Industry , 2/30S Warp And Weft Yarn [Polyester/Cotton] In Cones , 2/30S Warp And Weft Yarn [Polyester/Viscose]In Cones , 18Scotton Yarn Warp Yarn In Cones , 26S Weft / Warp Cotton Yarn In Cones , 10 S Weft / Warp Cotton Yarn In Cones , 2/18S Warp Cotton Yarn In Cones , 10 S Weft Cotton Yarn In Cones In Different Colours (Red, Green, Violet And Yellow) , Firewood , Ground Nut Shell , Central Prison, Coimbatore Group : D - Book Binding& Hand Made Paper Industry , Carboard - 2½ Lbs , Varnished Marble Paper , Khaki Craft Paper , Tapioca Flour , Copper Sulphate , Calico , White Paper , ½ White Tape , Sand Paper , 10S Thread , Glue (Vajjiram) , Card Board - 2 Lbs , Central Prison, Coimbatore Group : E - Tailoring Industry , 60 S Over Lock Polyster Cotton Thread , 40 S Over Lock Polyster Cotton Thread , Pencil , 40S Polyster White Thread 1000 Mtrs , 80S Polyster White Thread 1000 Mtrs , White Colourcoat Button ( As In Praga Brandor Equivalent) , Khaki Colourcoat Button ( As In Praga Brandor Equivalent) , Rain Coat Cloth (Khaki Colour) , Rain Coat Cloth (White Colour) , Thread Graphic 4 Ply( As In Madura Coats Or Equivalent ) , Plastic Buckles Khaki , Plastic Buckles White , White Nylon Button , Reflective Tape White/Orange Colour , Candle , Flourescent Screen Printing As Policein Orange Colour , Velcro 1 (White & Black Colour) , Central Prison, Coimbatore Group : F - Carpentry Unit , Nylon Wire , Fevicol , Polish , Sand Paper , Brush , Nails , Thinner , Turpentine Oil , Central Prison, Coimbatore Group : V - Mosquito Net , Mosquito Net Cloth 135 Cm Width , 80S Polyster Cottonthread Khaki , Central Prison, Coimbatore Group : W - Dyeing Industry (Only Those Who Are In Theprocessing Field And Having Central Excisel4 License Are Eligble For Quoting Rates For Dyeing Clothes) , Dyeing Charges For Grey T.C. Cloth Into Khaki - Single Width , Dyeing Charges For Grey T.C.Cloth Into White - Single Width , Dyeing Charges Forgrey T.C.Cloth Into Khaki - Double Width , Dyeing Charges For Grey T.C. Cloth Into White - Double Width , Dyeing Charges Forgrey Poly Viscose Cloth Into Khaki- Single Width , Dyeing Charges For Grey Poly Viscose Cloth Into White - Single Width , Dyeing Charges For Grey Poly Viscose Cloth Into Khaki - Double Width , Dyeing Charges For Grey Poly Viscose Cloth Into White - Double Width , Dyeing Charges 114Cm Turban Cloth Into Blue Colour , Dyeing Charges 114Cm Turban Cloth Into Naptal Meroon Colour , Dyeing Charges For Single Width Grey T.C. Cloth Into Red Color , Central Prison, Madurai Group : B - Other Miscellaneous Articles , Char Coal , Jute Twine , Hessain Cloth , Soda Ash , Disposable Shaving Razor (For Issue To The Male Prisoners) , Central Prison, Madurai Group : C -Weaving Industry , 2/17Syarn [Cotton] In Cone - Bleached , 20Syarn [Cotton] In Cone - Bleached , Central Prison, Madurai Group : D - Book Binding Industry , Carboard - 2½ Lbs , Varnished Marble Paper , Khaki Craft Paper , Tapioca Flour , Copper Sulphate , Calico , White Paper , ½ White Tape , Sand Paper , 10S Thread , Glue (Vajjiram) , Card Board - 2 Lbs , Firewood , Saw Dust , Central Prison, Palayamkottai Group : B- Other Miscellaneous Articles , Jute Twine , Hessian Cloth , Disposable Shaving Razor (For Issue To The Male Prisoners) , Central Prison, Palayamkottai Group - C : Weaving Industry , 2/17S Yarn [Cotton] In Cone - Bleached , 20Syarn [Cotton] In Cone - Bleached , Central Prison, Palayamkottai Group : D - Book Binding Industry , Carboard - 2½ Lbs , Varnished Marble Paper , Khaki Craft Paper , Tapioca Flour , Copper Sulphate , Calico , White Paper , ½ White Tape , Sand Paper , 10S Thread , Glue (Vajjiram) , Firewood
Contract Date: Jul 15, 2024 Contract Value : ₹ 28.43 Crore
Government Departments No of Bidders 25
Tamil Nadu View Result →
8.
Public Administrative Department #3481208 AOC
Sale Of Scrap Material And Empty Oil / Ghee Tin Shri Saibaba Sansthan Trust, Shirdi , -1 Empty Small / Large Mouth Ghee Cans 2 Empty Small / Large Mouth Oil Cans With Cracked / Chipped / Blackened Bad Condition 3 Empty Cashew Cans ( As Is ) 4 Sacks ( Kaltan ) Good - Cereals, Pulses ( 50 Kg Of Bharti ) 5 Sacks Of Waste ( Kaltan ) Bad - Cereals, Pulses ( 50 Kg Of Bharti ) 6 Plastic Sacks- Grains, Pulses ( 50 Kg Of Bharti ) 7 Bleaching Powder Plastic Bags ( 25 Kgs ) 8 Plastic Items ( Garbage Cans / Dustbins / Buckets / Mugs, Small / Large Burst Drums, Burst Fiber Water Tanks, Fiber Piles, Broken Plastic / Fibre Chairs, Plastic Carts, Pvc Plumbing / Fitting Materials, Plastic Briefcases, S.W.R .Pipe ) 9 Plastic Drums 05 Liters. All Colors Within 20L ( Good ) 10 Plastic Drums 21 Liters. All Colors Within 50L ( Good ) 11 Plastic Drums 51 Litres. It Is 100 Lt. All Colors ( Good ) Up To 12 Plastic Drums 101 Liters. It Is 200 Lt. All Colors ( Good ) Up To 13 Wet / Dry Empty Plastic Bags Of Milk ( Including Filled Bags ) 14 Good Carton ( Cartoon ) Of Empty Boxes ( From Publications And Canteen Section ) 15 Empty Boxes Of Oily / Damaged Cardboard ( From Hospital / Ladu And Barfi Prasad Section ) 16 Binding Cardboard ( Registers, Receipt Booklets, Pads, Books ) 17 Answer Paper Waste Paper – ( Torn 2 / 3 Pieces With Sack Filled ) 18 Paper Printing D Paper Waste ( Torn 2 / 3 Pieces With Bag Filled ) 19 Pulverized Waste Paper ( Extracted From Machines Only ) 20 Colored Paper Scraps ( Coupon Books, Case Paper, Invitation Cards, Wedding Invitation Cards And Other Torn Paper Scraps ) 21 Useless Ferrous Scrap Material Damaged By Use 22 Scrap Material Damaged By Use Of Waste 23 Useless Copper Scrap Material Damaged By Use 24 Brass Scrap Material Damaged By Use 25 Useless Steel Scrap Material Damaged By Use 26 Useless Damaged Aluminum Scrap Material 27 Useless And Damaged Seed Scrap Material 28 Gallonized ( Gi ) Scrap Materials Damaged By Use Of Useless 29 Useless Use Damaged Armored Cables And Pieces Of Wire ( Copper / Aluminium ) Scrap Materials 30 Iron Kiss Burnt Copper Choke Of 31 Ele.Tube 32 Electronic Chokes Of Ele.Tubes 33 Burnt Wicks Of Sodium Light 34 Used Black Oil 35 The Pure Oil Poured On The Idol 36 Stained, Torn, Worn Textiles ( Sheets, Bed Sheets, Blankets, Damaged Mattresses, Mattress / Pillow Cases, Towels, Door And Window Curtains ) 37 Unused / Worn Cotton Mattresses ( Excluding Hospitals From Devotee Residences Only ) 38 Unusable / Worn Out Foam, Kathya Mixed Mattresses ( Only From Devotee Accommodation Except Hospital ) 39 Useless And Damaged Wooden Scrap Materials ( Wooden Doors, Windows, Wooden Frames, Wooden Chairs, Wooden Racks, Wooden Photo Frames ) 40 Printers, Ribbons, Toners, And Other Computer Supplies Damaged By Computer Use 41 Computer Discharged Small And Large Batteries Smf ( All Colors ) – 12 Volt, 7 Ah To 100 Ah 42 Empty Water / Sanitizer Plastic Bottles 43 Discontinued Small And Large Batteries Of Generators ( All Colours ) 44 Revolving Chairs ( With Iron+Steel Rods+Fiber And Cloth Cushions ) 45 Scrap Plywood Materials Damaged By Use ( Room / Bathroom Plush Doors, Plywood Racks, Plywood Boards And Round Blocks And Other Plywood Materials Etc. ) 46 Retail Goods Damaged By Use ( Telephones, Watches, Mobiles, Leather Goods, Tape Recorders, Electric Bells, Calculators, Electric Irons, And Only Photo Frames Etc. ) 47 Useless Rubber Mats Damaged By Use ( Small Size Rubber Mats In Front Of Room Door / Bathroom Door-Doormats, Carpets In Rooms ) 48 Machinery Items Damaged By Use ( Including Electronic, Electrical And Mechanical Items ) 49 Machinery Batteries ( Smf Batteries ) From Shree Sainath Hospital / Shree Saibaba Hospital 50 Plastic Pipe - White - Water / Fitting ( Cracked / Broken ) 51 Damaged Black Pipes - Water / Fittings ( Cracked / Broken ) 52 Glass Articles Damaged By Useless Use ( Glass Tables, Table Glass, Mirrors, Burnt Glass Tubebars, Burnt Glass Electric Bulbs, ) 53 Plastic Waste In Institutional Waste Depots – Plastic Waste Generated By Cleaning Institutional Buildings And Premises ( Water Pouches, Plastic Bags, Empty Food Pouches, Empty Tea Cups ) 54 Sofaset ( Leather+Foam+Wood+Plywood )
Contract Date: Apr 05, 2024 Contract Value : ₹ 3,081
Trust & NGO No of Bidders 9
Maharashtra View Result →
TenderDetail
Loading tenders