10000 Telecommunication Tenders In India 2025

Search All Local Tenders For Telecommunication. Download Telecommunication Tender Documents. In 2025 10000 Telecommunication Tenders Are Published By Various Tendering Authorities &Amp; Private Companies. 10000 Live Tender Notices For Telecommunication Are Available. Identify Right Bids Opportunities To Participate In Government Tenders. Get Telecommunication Bid Information Along With Tender Document, Boq, Technical Specification &Amp; Other Terms Condition Regarding Telecommunications Tenders.

Indian Tenders
1094
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
1078
Live Opportunities Worldwide
Filters
Stage
1377
41
31
Tender Publishing Platform
1103
346
State / UT
34
149
147
123
120
89
80
79
62
60
59
56
48
44
41
39
38
30
30
24
21
16
16
14
9
8
7
7
7
6
6
5
5
3
1
Contract Value
508
494
279
165
Publish Date
2
1
0
0
0
Sector
30
520
184
154
103
64
63
58
55
44
42
41
28
18
10
10
8
7
7
6
5
5
4
3
2
2
2
1
1
1
1
Ownership
6
662
518
236
30
2
1
Within keyword
Active filters:
Showing 1–29 of 1449 tenders matching your filters
Telangana View Result →
2.
Power #11453210 AOC
Bids Are invited for Field Telephone Cable (Telecommunication Cable) (Q2) Total Quantity : 220
Contract Date: Ref. Documents Contract Value : ₹ 44,000
Boards / Undertakings / PSU No of Bidders 1
Ladakh View Result →
Telangana View Result →
4.
Communications and Information Technology  #11422863 Technical Bid
Selection Of Agency For Rooftop Solarization Of 75Kw Power At Telecommunications Consultants India Limited.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 9
Delhi View Result →
Uttar Pradesh View Result →
6.
Housing Urban and Rular Development #11391881 AOC
Bids Are invited for Prestressed Concrete Poles For Overhead Power Traction And Telecommunication Lines As Per Is 1678 (Q3) Total Quantity : 50
Contract Date: Ref. Documents Contract Value : ₹ 4.42 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
7.
Defence #11337220 AOC
Bids Are invited for Telecommunication Cable - Fully Filled Petroleum Jelly Or Absorbent Thixotropic Gel (V2) Total Quantity : 5000
Contract Date: Ref. Documents Contract Value : ₹ 6.09 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Madhya Pradesh View Result →
8.
Housing Urban and Rular Development #11336620 AOC
Bids Are invited for Prestressed Concrete Poles For Overhead Power Traction And Telecommunication Lines As Per Is 1678 (Q3) Total Quantity : 75
Contract Date: Ref. Documents Contract Value : ₹ 6.56 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
9.
Educational and Research Institute #11299551 Price Bid
Tender For Supply Of Library Books , Library Books (Refer Nit) , Industrial Safety And Human Behaviour Kaila 9788174734532 , Engineering Mechanics Vela Murali Bks456005 , Earthquake Resist Design Structural Shashikant Dugg Bks643652 , Surveying And Levelling Subramanian 9780198085423 , Practical Railway Engineering, 2Nd Ed Clifford Bonnett 9780000990136 , Geographic Information Systems Gis For Disaster Management 2Ed Brain 9781032552460 , Design Of Structural Elements Chanakya 9781138046436 , Wind Loading Of Structures 3Rd Edition John D. Holmes 9780367241803 , Structural Analysis 3/Ed Menon 9788184877342 , Concrete Pipes And Pipelines Joshi Bks426990 , Strength Of Materials Basavarajaiah 9788173714580 , Geotechnical Engineering Debashis Moitra 9788173719905 , Textbook Of Environmental Studies For Undergraduate Courses 3 Ed Bharucha 9789389211788 , Intelligent Transportation Systems Srinivasa Kumar 9788195400928 , Transportation Engineering Srinivasa Kumar 9789389211160 , Structural Analysis With Finite Elements Hartmann 9788132208945 , Strength Of Materials Vol 1 Binu Sukumar 9789388005029 , Geospatial Technology Dwivedi 9789380381480 , Heavy Metal And Metalloid Contamination Of Surface And Underground Water Gupta A. 9781032728582 , Fundamentals Of Environmental Engineering Danny D Reible 9781566700474 , Computer-Aided Highway Engineering S Goswami 9781032728483 , Fundamentals Of Hydrology Davie 9781032251936 , Highwall Mining : Applicability, Design & Safety Porathur J. L. 9781032728919 , Environmemtal Pollution Control Engineering 4Ed Rao 9788122472288 , Plane Surveying 3Ed Chandra 9788122438802 , Design Of Reinforced Cement Concrete Vol 1 Structural Elements Bhavikatti 9788122440515 , Strength Of Materials, 2/Ed Jindal 9789352861521 , Fundamentals Of Hydraulic Engineering Sy Houghtalen 9789332507593 , Geotechnical Engineering Coduto,Yeung 9789332587427 , Strenth Of Materials Jindal 9788131759097 , Dynamics Of Structures 2Nd Ed Jain 9789357059350 , Finite Element Method With Cd Eldho Desai Shah 9788131724644 , Soil Mechanics And Foundation Engineering Purushotama Rai 9788131790816 , Engineering Mechanics - Statics & Dynamics Shames Rao 9788177581232 , Dynamics Of Structures In Si Unites 5Ed Chopra 9789353945251 , Elementary Engineering Hydrology Deodhar 9788131708057 , Environmental Studies Basak 9788131721186 , Introduction To Finite Elements In Engineering 5/E Tirupathi 9781009461818 , Strength Of Materials Rao 9781108454285 , Plumbing Engineering Nikhil Anthony 9788119365128 , Fundamental Of Ground Improvement Engi Prof.Dr.R.K. Khit 9788195916948 , Surveying And Levelling : Part - 1 Kanetkar Kulkarni Bks644037 , Surveying And Levelling : Part - 2 Kanetkar Bks644038 , A Textbook Of Strength Of Materials Rajput 9789355010704 , Building Construction Bhavikatti 9789325960794 , Fundamental Of Reinforced Concrete Chandra Bks498526 , Irrigation Engineering And Hydraulic Structures Sharma Bks535826 , Surveying I Anne Mary 9788183717304 , Highway Engineering Subramanian 9788183716888 , Strength Of Materials Bansal Bks534222 , Reinforced Cement Concrete Design (Reinforeced Concrete Structures) Punima 9788131809426 , Building Construction Rangwala Bks502124 , Civil Engineering Drawing Rangwala Bks440591 , Soil Mechanics & Foundation Engineering Modi 9788189401306 , Engineering Materials Rangwala Bks385325 , Bridge Engineering Rangwala Bks554100 , Harbour Dock And Tunnel Engineering Srinivasan Bks502125 , Solid Hazardous Watse Management 2Ed Rao 9789389354621 , Textbook Of Remote Sensing And G.I.S 4Ed Reddy 9789381075975 , Reinforced Concrete Design P.B Sharma 9789391910419 , Energy Environment Ecology And Society Anil Kumar 9788178002576 , Solved Problems In Geotecnical Engineering Sharma 9789395038478 , Highway Engineering Suganthi Bks411034 , Highway And Railway Engineering Santhanam Bks638485 , Construction Materials & Tech Mathankumar Bks638450 , Prefabricated Structures Soundrarajan Bks638488 , Structural Analysis-I Santhanam Bks479564 , Green Building Design Molykutty Bks503088 , Irrigation Engineering Basak 9780074635384 , Estimating Construction Costs Peurifoy 9780071239455 , Design Of Steel Structure Duggal 9780070260689 , Concrete Technology Gambhir 9781259062551 , Engineering Mechanics Timoshenko 9781259062667 , Flow In Open Channels Subramanya 9789353166298 , Reinforced Concrete Design 4Ed Pillai 9789354601026 , Surveying Vol - Ii 5Th Edn Duggal 9789353167523 , Surveying And Levelling Basak 9789332901537 , Prestressed Concrete 6Ed Krishna Raju 9789387886209 , Fluid Mechanics White 9789355322043 , Strength Of Materials Rattan 9789385965517 , Surveying Vol - 1 Duggal 9789353167509 , Environmental Studies-3Ed Joseph 9789352605170 , Construction Planning, Equipment Peurifoy 9780070706996 , Fluid Mechanics Fundamentals And Applic Cengel 9789353166212 , Schaums Outline Of Finite Element Analysis Buchanan 9789389691375 , Wind Energy Theory And Practice 3Ed Ahmed Bks662294 , Bituminous Road Construction In India Kandhal 9789391818821 , Mechanics Of Composite Structures Vasiliev 9781138582101 , Satellite Towns In Neometropolitan Development In India Amit Chatterjee 9789811932052 , Sustainable By Design Walker 9781032973685 , Management Of Quality In Construction Ashford 9781138607163 , Disaster Managament 2/Ed Pandey 9789357461610 , Remote Sensing And Image Interpretation Thomas Lillesand 9789354642104 , Composite Structures Of Steel And Concrete 3Ed Johnson 9788126539819 , Strength Of Materials 2Nd/Ed Debabrata Nag 9788126534876 , Reasoning Ability And Quantitative Aptitude Tcy Online 9788126559008 , Green It Strategies And Applications Using Envir Intell Bhuvan Unhelkar 9781032054025 , Bioenergy For Sustainability And Security Behera 9789381891438 , Textbook Of Engineering Geology Annadurai 9789385259937 , Structural Dynamics Mukhopadhyay 9788180520907 , Matrix And Finite Element Analysis Mukhopadhyay 9788180520754 , Irrigation Engineering & Hydraulic Structures Suresh 9789383656899 , Strength Of Materials 2Ed Vendateshan 9789383656646 , Concrete Technology Job Thomas 9788131526682 , Steel Design Segui 9788131526651 , A First Course In The Finite Element Methods Logan 9789353507855 , Civil Engineering Materials Sivakugan Tuladhar 9789386650382 , Soil And Water Conservation Engineer Fangmeier 9788131524985 , Principles Of Foundation Engineering 9Th Ed Das 9789355738110 , Elements Of Civil Engineering Balasubramanya 9789387511576 , Soil Mechanics & Foundation Engineering Huat Prasad 9788131529591 , Principles Of Foundation Engineering Das 9789386650955 , Analysis Of Structures On Elastic Tsudik 9788131518953 , Strength Of Materials : Mechanics Gupta 9789355737717 , Steel Design With Mt Segui 9789386650887 , Prestressed Concrete Structures, 6Ed Dayaratnam 9788120417915 , Fundamentals Of Reinforced Cement Concrete Designs Gahlot 9789385915611 , Instrumental Methods Of Analysis Willard 9788123909431 , Tb Of Soil Mechanics And Foundation Engineering:Geo Technical Engg Murthy 9788123913629 , Civil Engineering Through Objective Type Questions 3Ed Gupta 9788123907970 , Advanced Reinforced Concrete Design 3Ed Raju 9788123929606 , Design Of Reinforced Concrete Structures 4Ed Dayaratnam 9788120414198 , Structural Dynamics Paz 9788123909783 , Modern Prestressed Concrete Libby Bks465269 , Textbok Of Solid Wastes Managemnt Khan 9788123909448 , Analysis & Design Of Substructures, 2Ed Swami Saran 9788120417007 , Building Repair And Maintance Management Gahlot 9788123912431 , Advanced Foundation Engineering Murthy 9788123915067 , Modern Construction Management 7Ed Harris 9788126572298 , Groundwater Hydrology Rushton 9788126539772 , Textbook Of Highway And Traffic Engineering Saxena 9788123924175 , Airport Engineering Saxena 9788123915500 , Construction Dewatering And Groundwater Control 3Ed Powers 9788126541669 , Quality Management Of Cement Concrete Construction (Pb) Gahlot 9788123916989 , Tb Of Water Supply And Sanitary Engineering Husain 9788120416833 , Design Of Bridges 5Ed Raju 9788120417984 , Essentials Of Bridge Engineering 6Ed Victor 9788120417175 , Building Construction Handbook Chudley 9789381269169 , Design And Construction Of Concrete Shell Roofs Ramasamy 9788123909905 , Strength Of Materials, Vol-Ii:Advanced Theory And Problems Timoshenko 9788123910772 , Construction And Project Managment 2Ed (Pb 2018) Krishnamurthy 9789386217790 , Water And Wastewater Calculations Manual 2Ed Lin 9789353162863 , Design Of Stell Structures Abu-Saba 9788123905389 , Prestressed Concrete Problems And Solutions Raju 9788123925424 , Water Resources And Irrigation Engineering Ganesaguru Bks588955 , Dam Engineering Asthana 9789381891469 , Sedimentary Rocks In The Field A Colour Guide Stow 9781874545699 , Soil Mechanics Basic Concepts & Engineering Aysen 9780415383936 , A Tb Of Fluid Mechanics And Hydraulic Machines Bansal Bks493063 , Intelligent And Sustainable Cement Production Chatterjee A.K. 9781032728445 , Total Quality Management 5Ed Besterfield 9789353066314 , Matrix Methods Of Structural Analysis Kothandaraman 9789357059190 , Hydraulics And Fluid Mechanics Hydraulic Machine Modi , Seth Bks291963 , Limit State Design Of Steel Structures Duggal 9789353164874 , Schaums Outline Of Reinforced Concrete Everard 9789389538656 , Earthquake Resistant Design Of Structures Agarwal Bks344533 , Building Materials Varghese 9788120350915 , Total Quality Management 2Ed Mukerjee 9788119364299 , Principles Of Geotechnical Engineering 10 Th Ed Das 9789355738103 , Building Materials Products Properties And Systems Gambhir 9780071077606 , Gate 2025 Civil Engineering - Guide By Gkp C L Educate 9789356817593 , Gate 2025 Mechanical Engineering Guide Gkp 9789356817746 , Engineering Design Dieter 9789355322258 , Economics And Principles Of Management Vinoth Kumar 9788194244646 , Vector Mechanics For Engineers Dynamics Beer 9789353166656 , Aviation Maintenance Management Kinnison 9780071076838 , Theory Of Machines S S Rattan 9789353166281 , Turbomachinery Dubey 9789353161156 , Engineering Mechanics 4/E Kumar 9780070681811 , Modern Compressible Flow: With Historica Anderson 9789355320070 , Programming In Matlab Patel Mittal 9789332524811 , Finite Element Analysis Moaveni 9788131760642 , Non Conventional Energy Resources Sobh Nath Singh 9789332543577 , Additive Manufacturing And 3D Printing Technology Awari Thorat 9781041049562 , Practical Guide To Vehicle Refinishin Woodstock 9781032963570 , The Internet Of Mechanical Things The Iot Framework Sami Salama Hussen 9781041038573 , Energy Storage Systems And Components Alfred Rufer 9781041049470 , Metal Cutting Theory & Practice Stephenson 9780824758882 , Classical Mechanics Problems And Solutions Carolina C Llie 9781032983608 , Product Design Baxter 9781032967882 , Thermal Measurements & Inverse Tech Orlande 9781439845554 , The Induction Machines Design Handbook Boldea Bks331229 , Modeling And Control Of Engineering Systems Clarence W. De Silva 9781420076868 , Fundametals Of Production Planning And Control Chapman 9788131717394 , Applied Thermodynamics For Engineering Technologist 5Ed Eastop 9788177582383 , Classical Mechaincs Goldstein 9788131758915 , Introduction To Robotics Saha 9789355326461 , Thermodynamics-Basc And Applied Ganesan 9789353161279 , Ethics In Engineering 5/Ed Martin 9789355325075 , Digital Marketing Chaarlas 9788119243983 , Non Conventional Energy Resources Khan 9789352601882 , Supply Chain Logistics Management Bowersox 9789353162580 , Mechanical Metallurgy Appuraj Thiyagrajan Deiter 9781307834840 , Schaums Outline Of Continuum Mechanics Mase 9789389691283 , Schaums Outline Of Statics And Mechanics Of Materials Nash 9789389691399 , Maleev & Hartmans Machine Design 6Ed Grover 9788123926322 , Mass Transfer Theory And Applications Narayanan Bks440952 , Manual Of Fire Safety Prakash 9788123919904 , Gpropulsion Systems For Space Applications Satyanarayana 9789395038553 , Mechanics Of Materials Si Version 5Ed Philpot 9789354643293 , Introduction To Robotics 3/Ed Niku 9789357461306 , Advanced Mechanics Of Materials 6Ed Boresi 9788194726395 , Design And Analysis Of Experiments Douglas & Montgomery 9788126540501 , Machine Component Design Robert C.Juvinall 9788126559732 , Callisters Materials Science And Engineering, 2Nd Ed Balasubramaniam 9788126541607 , Process Dynamics And Control 4Ed Dale Seborg 9789354248429 , Engineering Optimization Theory And Practice 5Ed Rao 9789357461238 , Principles Of Modern Manufacturing Si Version Groover 9788126573059 , Convective Heat And Mass Transfer South Asian Edi Mostafa Ghiassiaan 9781107511811 , Continuum Mechanics Jog C S 9781108437141 , Singers Engineering Mechanics Statics & Dynamics ( Si Units ) 3Ed Vijay Kumar 9788178002194 , Analytical Mechanics Fowles 9788131501115 , Thermal Sciences Potter Scott 9788131529461 , Physical Metallurgy Principles Abbaschian 9788131520697 , Additive Manufacturing Technology Hari Prasad 9789353500481 , Computational Fluid Dynamics & Heat Ghosh Dastidar 9788131533079 , Internet Mrketing With Mt Zahay 9789355734570 , Mechanical Vibrations Theory And Applications Kelly 9788131526033 , Mechanics Of Materials, Enhanced Edi Goodno--Gere 9789355737847 , Fundamentals Of Mechatronics Jouane 9788131526026 , Mechanics Of Materials Strength Of Materials Pilli/Bala 9789386668509 , Workshop Manufacturing Practices Ai Juneja 9789387994614 , The Finite Elements Methods - Its Basis & Fundamentals 7/Ed Zienkiewiez 9789351071587 , Automation And Collaborative Robotics (Dp) Mathews 9781484277102 , The Robotic Process Automation Handbook : A Guide To Implementing Ri Systems Taulli 9781484275306 , Materials Selection In Mechanical Design 5Ed Ashby 9789351073864 , Industry 4.0 : The Industrial Internet Things Gilchrist 9781484249703 , The Finite Element Method A Practical Course 2Ed Liu 9789351071594 , Elasticity-Theory, Applications & Numerics 2Ed Sadd 9789351072270 , Energy Resources And Their Utilisation R.K. Khitoliya 9789394917040 , Workshop Theory And Practice Delilah Sam 9788119365098 , New Persp. In Hybrid Vehicle Technology Samual Rodrigues 9788119365418 , Natural Gas Engineering Selvin 9788119365197 , Machine Shop Theory Samual Rodrigues 9788119205639 , Applied Mechanics Laboratory Samual Lobo 9788119365760 , Robotics: Emerging Opportunities Adrian Dsilva 9788119523702 , Advances In Hypersonic Vehicles Samual Rodrigues 9788119365500 , Machine Elements Samual Rodrigues 9788119205691 , Work And Energy Parth Chavda 9788119365234 , Design Thinking : A Comprehensive Textbook Tiwari 9789357468640 , Welding Technology Sanfras Monteiro 9788119523023 , Combustion Engineering Samual Rodrigues 9788119205943 , Fluid Machinery Noel Vincent 9788119365029 , Renewable Energy Roy 9789384007157 , Engineering Graphics Using Autocad 7/Ed {Pb} Elanchezhian C 789387938564 , Introduction To Micromachining 2Ed Jain 9788184873610 , A Systems Approach To Automotive Technology Erjavac 9788131512111 , Emotionally Intelligent Design Pavliscak 9789352138029 , Mechanics Of Solids Binu Sivakumar 9789380381671 , Mechanics Of Solids Christian Johnson 9789385983085 , Jet Engines Jaganathan 9789380381497 , Essentials Of Management, 11Ed Koontz 9789353168148 , Disaster Management Subramanian Bks481407 , Engineering Fluid Mechanics Kumar Bks613447 , A Textbook Of Fluid Mechanics Rajput Bks648302 , A Textbook Of Thermal Engineering ( Lpspe ) Khurmi Bks613483 , Materials Science And Engineering Raghavan 9788120350922 , Engineering Economics 2Nd Ed Panneerselvam Bks661039 , A Tb Of Theory Of Machine Gupta R Khurmi Bks408347 , Energy Security And Sustainability Shukla A. 9781032728926 , Mechanical Engineering Jain Bks554131 , Engineering Materials And Metallurgy Annamalai 9789386235046 , Kinematics Of Machinery Baskar Bks462932 , Thermal Engineering Swaminathan Bks638475 , Engineering Materials And Metallurgy Baskar Bks638439 , Lean Manufacuring Kalyana Chakravarthy Bks638464 , Elements Of Mechanical Engineering Singh Bks448529 , Fundamentals Of Manifacturing Engineering Singh 9789380156002 , Strength Of Machine Elements Ghorpade 9789384726003 , Observability Engineering Achieving Production Excellence Majors 9789355422996 , Research Methodology 5Ed Kothari 9789389802559 , The Automotive Body Vol 2 Morello 9788132208884 , Kinematics Of Machines Kumar 9789388005425 , Essentials Of Heat And Fluid Flow In Porous Media Narasimhan 9789382127215 , Analysis Of Composite Structures Decolon 9789380931463 , Theory Of Elasticity Chandramouli 9789380381633 , Principles Of Composite Material Mechanics 3Ed Gibson Bks380369 , Introduction To Combustion Engineering Basic And Applied Amitava Sarkar 9789357053129 , Textbook Of Finite Element Analysis Seshu Bks414440 , Engineering Thermodynamics Savithiri Bks442773 , Automobile Engineering Vol-Ii Kirpal Singh 9788180142512 , An Introduction To Mechanical Engine 4Ed Wickert Lewis 9789353507473 , Welding Engineering & Technology Parmar Bks53191 , Manufacturing Technology Vol 1-Foundry Forming Rao 9789353160500 , Manufacturing Technology Singh 9789381162385 , Dynamics Of Machines Balaguru 9789386668608 , Unconventional Machining Vivekanandhan Bks613041 , Basic Civil And Mechanical Engineering Shanmugam 9789355329547 , Engineerin Drawing 2Ed Shah / Rana 9788131710562 , Materials For Engineers And Technicians 7Ed Bolton 9781032973722 , Fuel Cell Technology Handbook Hoogers Bks333321 , Robots And Robotics Miller 9789387572966 , Non Destructive Testing And Materials Vivekanandhan Bks476859 , Engineering Mechanics Nelson 9780070146143 , Engineering Tribology 4Ed Stachowiak 9789351071679 , Materials Selection In Mechanical Design 5Ed Ashby 9789351073864 , Automobile Engineering Ayyappan Karthikeyan Bks464418 , Thermal Engineering Swaminathan Bks638475 , Automobile Engineering Babu Singh Bks587323 , A Textbook Of Production Technology Sharma Bks479783 , A Textbook Of Mechatronics Rajput Bks554009 , Automobile Engineering Jain 9780070445291 , Engineering Mechanics Statics & Dynamics Khanchani 9788180521089 , Basic Mechanical Engineering Prabhu 9788183715737 , Powder Metallurgy Ramakrisnan 9789381714485 , Additive Manufacturing Technology Hari Prasad 9789353500481 , Switching And Finite Automata Theory Jha 9780521176804 , Introduction To Mechanics 2Nd Ed Mahendra K Verma 9788173719813 , Basic And Applied Thermodynamics - A Ready Recknor Bhat 9789388005074 , Basic Refrigeration And Airconditioning 4Ed Ananthanarayanan 9781259062704 , Engineering Mechanics Applied Mecha Gupta 9789353505240 , Mechatronics Sathish Kumar Bks476759 , Automobile Engineereing Vol I Singh Bks247106 , Process Planning And Cost Estimating Selvakumar Bks480422 , Non Conventional Energy Resources Sawhney 9788120346093 , Non Conventional Energy Resources Sobh Nath Singh 9789332543577 , Introduction To Micromachining 2Ed Jain 9788184873610 , Vector Mechanics For Engineers Statics/Dynamics (Sie) Beer 9789353166625 , Fluid Mechanics &Hydraulics Rev &Updated Edn Ukarande 9789381162538 , Mechanical Measurements - Revision 6Ed Beckwith 9789353945633 , Vibration Monitoring Testing And Instrumentation C W.De Silva 9781032292137 , A Treatise On Turbomachines Gopalakrishnan Bks321517 , Construction Materials Vs Karthikeyan Bks476834 , Design Of Machine Elements Bhandari 9789390177479 , Mechanical Vibrations Bhava 9788131732489 , Design Of Transmission Systems Baskar Bks476758 , Engineering Materials And Metallurgy Baskar Bks638439 , Manufacturing Technology Vivekanandhan Bks638476 , Design Of Machine Elements Arunraja Bks638441 , Mechanical Vibrations Nag 9788126530908 , Power Plant Engineering Dhanasekar Bks505300 , Statistical Quality Control A Modern Introduction 6Ed Montgomery 9788126525065 , Additive Manufacturing Technologies Shiva Ahuj Shukla 9789357462419 , Hydraulics And Pneumatics Dixon Bks638479 , Engineering Principles Of Ground Modification Hausman 9789351341871 , Engineering Thermodynamics 6Ed Nag 9789352606429 , Refrigeration And Air Conditioning Arora 9789390385843 , Enterprise Resource Planning 4Th Edn Leon 9789353167820 , Foundations Of Material Science And Engg 6Th Edn Smith 9789355322173 , Shigleys Mechanical Engineering Design Budynas 9789390219636 , General Studies Paper - I ( 2025 ) Mhe 9789355327796 , Erp Demystified 3/Ed Leon 9789383286676 , Heat And Mass Transfer 6Ed Cengel 9789390185283 , Engineering Noise Control: Theory And Practices 4Ed Bies 9780415487078 , Rapid Prototyping And Engineering Applications Frank W.Liou 9781138569577 , Strength Of Materials Vol Ii Binu Sukumar 9789388005418 , Mechatronics A Foundation Course Clarence W.De Silva 9781138569553 , Design And Analysis Of Randomized Algorithms Hromkovic 9788132231592 , Metrology And Measurements Annamalai 9789388005463 , Fluid Mechanics And Machinery Molykutty 9789391549725 , Micro Electro Mechanical System Design Allen 9780824758240 , Micromachining Of Engineering Materials J Mcgeough 9781032419794 , Gas Turbine Combustion-3 Rd Ed Lefebvre 9781138569584 , Ergonomics Laboratory Exercises Joseph Gallwey 9781032973005 , Introduction To Biofuels Mousdale 9781439812075 , Environmental Engineering Charles Monteiro 9788119205509 , Power Plant Engineering Lijo Thomas 9788119365036 , Industrial Engineering Richard Carvalho 9788119205523 , Design & Operation Of Heat Exchanger Gerhard Rott 9788119365425 , Hydro Power Gerhard Rott 9788119205912 , Air Conditioning And Ventilation Systems Lijo Thomas 9788119365401 , Materials Science And Engineering Raghavan 9788120350922 , Automation And Collaborative Robotics (Dp) Mathews 9781484277102 , Design Management : Create, Develop And Lead Effective Design Teams Picchi 9781484283615 , Heat And Mass Transfer 2Ed Karwa 9789811926099 , Testing Of Metallic Materials 2Ed Suryanarayana 9788178001340 , Introduction To Engineering Materials 2/Ed Murray George 9781032530772 , Mechanics Of Composite Materials 2/Ed Jones R.M 9781138571075 , Reliability Evaluation Of Enginnering Systems 2Ed Billinton 9788181285522 , Workshop Practice Manual 6/Ed Reddy 9788178003078 , Finite Element Analysis 2D Lakshmi Narasai 9789389354225 , Engineering Mechanics Pb Lakshmi 9789390211609 , Engineering Mechanics 2Ed Harbola 9788131518298 , Environmental Science And Engineering Rajesh Gopinath 9789387511569 , Materials Science And Engineering Periodical Renewal Gilmore 9788131520451 , Environmental Science With Mt 16 Th Ed Miller 9789355738899 , Fluid Mechanics Munson Huebsch 9788126553433 , Engineering Mechanics: Dynamics, Si Version Meriam Bolton 9788126565375 , Engineering Mechanics Statics And Dynamcs James Meriam Kraige 9789354248566 , Engineering Fluid Mechanics Elger 9788126564491 , Engineering Mechanics Applied Mecha Gupta 9789353505240 , Machine Design Data Book Ramana 9789387593879 , Heat Transfer Alan 9789332575066 , Theory Of Machines 3Ed Bevan 9788131729656 , Introduction To Enviromental Engineering And Science Masters 9789332549760 , Heat And Mass Transfer Mayilsamy 9788131733837 , Engineering Thermodynamics 4Ed Rogers 9788131702062 , Operations Research :An Introduction-10Th Ed Hamdy Taha 9789352865277 , Engineering Mechanics - Statics & Dynamics Shames Rao 9788177581232 , Automation, Production Systems, And Computer - Integrated Manufacturing 5Th Ed Groover 9789361592959 , Introduction To Materials Science For Engineers 9E/D Shackelford 9789357059978 , Fundamentals Of Engineering Drawing Luzadder 9789332549982 , Engineering Materials Properties And Selection 9Ed Budinski Naraimhulu 9789332574045 , Thermodynamics Rajadurai Bks471287 , Environmental Science And Engineering Kaushik 9788122436471 , Engineering Optimization 4Ed Rao 9789395161800 , Cad/Cam/Cim 5Ed Radhakrishnan 9789395161855 , Finite Element Analysis With Ansys Workbench Tickoo 9789355513007 , Industrial Waste Management Mathankumar Bks480053 , Metrology And Measurements Vivekanandan Bks638442 , Finite Elements Analysis Baskar Bks534307 , Environmental And Agriculture Kavitha Bks638465 , Energy Materials Bandarenka A.S 9781032530789 , Digital Twin Ranjan Ganguli 9781032934198 , Industry 5.0 The Future Of The Industrial Economy Uthayan 9781032600130 , Quantum Computation Helmut Bez 9781032983738 , Wind Electrical Systems Bhadra, 9780195670936 , Metal Fatigue In Engineering Stephens 9788126539215 , Introduction To Industrial Internet Of Things And Industry 40 Sudip Misra 9781032146751 , Sustainable Manufacturing For Industry 4.0 Jayakrishna K. 9781032728728 , Reverse Supply Chains: Issues And Analysis Gupta S.M. 9781032729039 , Industry 5.0 The Future Of The Industrial Economy Uthayan 9781032600130 , Gas Turbine Heat Transfer Cooling Je-Chin Han, Sandip Dutta 9781439855683 , First Course In Aerial Robots And Drones (A) Bestaoui Sebbane 9781032963518 , Handbook Of Induction Heating Rudnev 9780824708481 , Fracture Mechanics (Forth Ed) T.L Anderson 9781032292120 , Fire Safety Engg Design Of Structures, 2Ed Purkiss 9788131220085 , Future Energy Improved Sustainable And Clean Opitons Letcjer 9788131220849 , Introduction To Finite Elements In Engineering 5/E Tirupathi 9781009461818 , Fundamentals Of Gas Dynamics Babu 9781910390009 , Fundamentals Of Propulsion Babu 9788180522529 , Engineering Metrology 3Rd Ed Narayana Bks396066 , Engineering Mechanics Kumaravelan Bks315205 , General Aptitude For Competitive Examinations Pattanaik Bks670722 , Dictionary Of Heat Power Engineering Ramalingam 9789386923035 , Environmental Pollution Principles Narayana Bks353570 , Production Processes Luqman 9788123918983 , Tractors And Their Power Units, Hb Lijiedahal 9788123905013 , Metal Cutting Principles Shaw 9788123901367 , Sheet Metal Press Tools Design And Making A Practical Approach Luqman 9788123925134 , Solid State Physics Wahab 9788184877786 , Practical Non - Destructive Testing, 3Ed Baldev Raj 9788173197970 , Mechanics Of Machines, 3Ed Ramamurti 9788173198922 , Handbook On Quality And Productivity Improvement Of Concrete Nayak 9788184876390 , Environmental Studies 4Ed Rajagopalan 9789354978944 , Finite Element Methods Dhanraj 9780198073901 , Fluid Dynamics Raisinghania Bks320511 , Entrepreneurship 11/Ed Hisrich 9789390113309 , Thermodynamics 9Th Ed Cengel 9789353165741 , Cad / Cam : Computer - Aided Design & Manufacturing Groover 9788177584165 , Engineering Vibration, 4/E Inman 9789332518483 , Thermodynamics 9Th Ed Cengel 9789353165741 , Schaums Outline Of Mechanical Vibration Graham Kelly 9789389538861 , Enterprise Resource Planning Singla 9789360531485 , Machine Drawing 51Ed Bhatt 9789385039560 , Heat Treatment : Principles And Techniques 3Ed Rajan 9788119364077 , Total Quality Management 2Ed Mukerjee 9788119364299 , Heat Treatment : Principles And Techniques 3Ed Rajan 9788119364077 , Operations Research Panneerselvam 9789354437892 , Design Thinking Teun Den Dekker 9781032786018 , Aeroplane Ramalingam 9788193103159 , Faqs In Control Systems Engineering Pattanaik 9789394639003 , Mass Transfer - Theory & Practice Begum/Anantharaman 9788120341692 , Total Quality Management 5Ed Besterfield 9789353066314 , Production &Operations Management 3Ed Panneerselvam Bks477079 , Manufacturing Technology Vol 2-Metal Cutting Rao 9789353160524 , Engineering Drawing Agrawal 9789353167448 , Cad / Cam : Computer - Aided Design & Manufacturing Groover 9788177584165 , Engineering Mechanics : Statics & Dynamics Kottiswaran Bks307984 , Power Plant Engineering Hegde 9789332534100 , Hydraulics And Fluid Mechanics Hydraulic Machine Modi , Seth Bks291963 , Fundamentals Of Heat And Mass Transer Kothandaraman Bks481435 , Alternative Fuels For Ic Engines Krishnasamy 9789364441995 , Mechatronics Electronic Control Systems In Mechanical And Electrical Eng Bolton 9789357052849 , Manufacturing Technology Vol 2-Metal Cutting Rao 9789353160524 , Fundamentals Of Heat And Mass Transer Kothandaraman Bks481435 , Mechatronics Electronic Control Systems In Mechanical And Electrical Eng Bolton 9789357052849 , Production &Operations Management 3Ed Panneerselvam Bks477079 , Engineering Drawing Agrawal 9789353167448 , Mass Transfer - Theory & Practice Begum/Anantharaman 9788120341692 , Industrial Robotics Control Frigeni 9781484294154 , Gate 2025 Production And Industrial Eng Gkp 9789356818170 , Engineering Vibration, 4/E Inman 9789332518483 , Fundamentals Of Engg Heat And Mass Transfer-5Ed Sachdeva 9789386070968 , Internet Of Nanothings And Wireless Body Area Networks Fadi 9781032599144 , Modern Machining Processes Pandey 9789386761835 , Materials Science For Mechanical Engineering Palanisamy 9789386923059 , Materials Science For Mechanical Engineering Palanisamy 9789386923059 , Textbook Of Fluid Dynamics Chorlton 9788123908816 , Engineering Mechanics : Statics & Dynamics Kottiswaran Bks307984 , Robotics Rajmohan Bks480419 , Hmt Data Book Kothandaraman 9788812243594 , Design Data (Data Book) Psg Bks58578 , Digital Signal Processing 2Ed Paulo Diniz 9781108406703 , 8086 Microprocessor And Applications 3Ed Kani 9789354661327 , Wireless Telecommunication System & Network Mullett 9788131520123 , Operational Amplifiers & Linear Integrated Circuits Lal Kishore 9788177585667 , Mobile Computing Principles Bfar 9780521696234 , Microprocessors & Programmed Logic 2Ed Short 9788131709160 , Design With Pic Microcontroller Peatman 9788177585513 , Digital Systems Design With Access Code Nagoor Kani 9789354667688 , Introduction To Biomems Folch 9781032568225 , Introduction To Biomedical Equipment Technology 4Ed Carr 9788177588835 , Antennas & Wave Propagation Raju 9788131701843 , Raspberry Pi For Dummies Cook 9789357460422 , Digital Signal Processors : Architectures --Op Kuo 9788131717936 , Principles Of Electromagnetics, 6Ed Sadiku 9780199461851 , Advanced Digital Design With The Verilog Michael.D.Ciletti 9789332584464 , Neural Networks Kumar 9781259006166 , Embedded System 2Nd Ed Peckol 9789357463966 , Microprocessor And Peripherals Chowdhury Bks405737 , Networks & Systems Roy Choudhury 9789389802535 , Microcontroller Theory And Application With The Pic Rafiquzzaman 9788126548354 , Digital Signal Processing For Anna University Kani 9789354661006 , Digital Signal Processing 3Ed Kani 9789354661167 , Analog And Pulse Circuits Lakshmaiah D 9789389354201 , Electronic Devices And Circuits Orient 9789386235305 , Quantum Chemistry 7 Ed Levine 9789332558533 , Engineering Circuit Analysis 9/Ed Hayt 9789390185139 , Gate 2025 Electronics And Communication Eng.Guide Gkp 9789356819306 , Chip Design For Submicron Vlsi : Cmos Layout And Simulation Uyemura 9788131501955 , Microelectronics Neamen 9789354601637 , Neural Networks And Learning Machines Haykin 9789332570313 , Electronic Circuits : Fundamentals And Applications 5Ed Tooley 9781032726687 , A Course In Digital Signal Processing Pucca Bundh Porat 9788126534913 , Signals And System Apte 9781316615393 , Digital Design 6Ed Mano 9789353062019 , Principles Of Signal Processing And Liner System Lathi 9780198062288 , Fiber Optic Communications 5Ed Palais 9788131717912 , Circuits And Networks Sudhakar 9789339219604 , Introduction To Communication Systems Madhow 9781316608241 , Analog Communication Rao 9780070704800 , Arduino Based Embedded Systems Singh 9781032964058 , Next Generation Wireless Lans 2Nd Ed Perahia 9781107414617 , Arm Microprocessor System Tahir 9781138387539 , Digital Communication Mutagi Bks478677 , Advanced Microprocessors & Peripherals Bhurchandi 9781259006135 , Vlsi Design Chitra 9788183716598 , Television And Video Engineering Salai Thillai 9788183712194 , The Design Of Cmos Radio Frequency Integrated Circuits Lee 9780521613897 , Network Security : Private Communication In A Public World Charlie Kaufman 9788196874339 , Sensors And Transducers Patranabis 9788120321984 , Neuro Fuzzy And Soft Computing Jang Sun Mizutani 9789332549883 , Network Analysis Channa Venkatesh 9788131533215 , Circuits Carlson 9788131505861 , Op Amps And Linear Integrated Circuits : Concepts And Applications Fiore 9788131512340 , Mobile Computing Principles Bfar 9780521696234 , Instrumental Methods Of Analysis Willard 9788123909431 , Vlsi Circuits And Embedded Systems Hasan Babu 9781032906003 , Computer Organization And Embedded System-6 Th Ed Hamacher 9789339218317 , Network Analysis And Synthesis, 2Ed Singh 9789353166724 , Handbook Of Biomedical Instrumentations Khandpur 9789355328021 , Security And Privacy In Internet Of Things Lots Hu Fei 9781032707150 , Television & Video Engineering Veeralakshmi 9789380156699 , Power Quality Sankaran 9781138569249 , Introduction To Microcontroller Programming For Power Electronic Control Applications Rossi 9781032972183 , Communications System Laboratory Preetham Kumar 9781138603288 , Digital Signal Processing And Its Applications Senthil Kumar 9788195268726 , Multimedia Enabled Sensors In Iot Fadi 9781032599205 , Novel Wearable Antennas For Communication And Medical System Albert Sabban 9781041049579 , Internet Of Things Using Single Board Computers : Principles Of Iot And Python Programming Kanagachidam Baresan 9781484299258 , Handbook Of Optical Communication Networks Ilyas 9781498798037 , Communications System Laboratory Preetham Kumar 9781138603288 , Digital Watermarking And Steganography 2Nd Edition Shih 9781032972121 , Propagation Handbook For Wireless Communication System Design Crane 9780849308208 , The Internet Of Things In The Cloud Honbo Zhou 9781498770354 , Arduino Based Embedded Systems Singh 9781032964058 , 5G Mobile Communications Concepts And Technologies Saad Asif 9781032663159 , Electronic Devices 10Ed Robert Floyd 9789354493935 , Semiconductor Physics And Devices, 3Ed Sze 9789354243226 , Digital Fundamentals 11Ed Floyd 9789332584600 , Electronic Devices And Circuits--11 Ed Boylestad Nashelsky 9789332542600 , The 8051 Microcontrollers & Embedded Systems 2Ed Mazidi 9788131710265 , A System C Primer 2Ed Bhasker 9788178001418 , Household Electricity And Appliances P.B Bhagava 9789390211265 , Image Processing Analysis And Mach Sonka 9789386858146 , Verilog Hdl 2Ed +Cd Palnitkar 9788177589184 , Modern Semiconductor Devices For Integration Hu 9788131730249 , Analog Integrated Circuit Design Isv 2Nd Ed Chan Carusone 9788126543939 , Textbook Of Digital Electronics Vasudevan 9789381714539 , Microwave Engineering 4Ed Das 9789390113347 , Analysis Of Microcontrollers For The Students Kothari 9789381714294 , Digital Signal Processing : For C.S.I.T Palani 9789380618388 , Fundamentals Of Digital Images Processing Jain 9789332551916 , Signals And Systems Sreenivasa Reddy 9789389354041 , Satellite Communications Pratt 9789354243035 , Analog Signals And Systems Kudeki 9788131787984 , Embedded Systems Handbook 2Ed System Design And Verification Zurawski Bks331222 , Vlsi Design And Eda Tools 2Nd Ed Sarkar 9788183714976 , Vlsi Design Das 9780198094869 , 8085 Microprocessor Pramod Borole 9789382127581 , Fundamentals Of Communication Systems Proakis 9788131705735 , Short Range Wireless Communication 3Ed Bensky 9789351073994 , Introduction To Fiber Optics Ghatak Ajoy 9781316644010 , The Definitive Guide To Arm Cortex M3 And Cortex M4 Processors Yiu 9789351071754 , Rf Circuit Design Ludwig 9788131762189 , Electric Circuits For Be/Betch 2Ed Kani 9789354663925 , Control Systems Nagoor Kani 9789389239010 , Digital Logic Circuits Nagoor Kani 9789354669989 , Microwave And Rf Design Steer 9789380381305 , Electrical Measurement And Measuring Instruments Rajput Bks543993 , Digital Signal Processing 3Ed Kani 9789354661167 , A Handson Course In Sensors Using The Arduino And Raspberry Pi Ziemann Volker 9781032791470 , Signal And Systems Simplified 2Ed Nagoor Kani 9789354661013 , Basic Electrical And Electronics Engineering 2/Ed Bhattacharya 9789332586505 , Ad Hoc Wireless Networks : Architectures & Protocols Murthy 9788131706886 , Ad Hoc And Wilreless Sensor Network Athawale 9789356066137 , Digital Circuits Design Kothari 9789332543539 , Solid State Electronic Devices Streetman 9789332555082 , Wireless Communication Goldsmith 9780521704168 , Probability And Stochastic Processes 3Ed Yates 9789354243455 , Signals, Systems And Inference Oppenheim 9789356064676 , Electromagnetic Field And Waves Salivahanan 9788119896677 , Analog Design For Cmos Vlsi Systems Maloberti 9788181284341 , Vlsi Design Michael 9780849318764 , Cognitive Sensors And Iot Fadi 9781032599236 , Digital Design & Computer Organization Farhat 9780849311918 , Digital Intergrated Circuits Evegni 9780849330575 , Introduction To Iot With Machine Learning And Image Processing Using Raspberry Pi Ambaji Kulkarni 9781032966885 , Basic Electrical And Electronics Engineering Murugan 9789384726072 , Adaptive Antenna Arrays Chandran 9788181289322 , Networks Lines & Fields 2Ed Ryder 9789332559516 , Data Compression : The Complete Reference Salomon 9788184898002 , Electric Circuits Bell Bks321194 , Digital Signal Processing Oppenheim 9789332550339 , Iot Standards With Blockchain : Enterprise Methodology For Internet Of Things Upadrista 9781484284278 , An In Depth Guide To Mobile Device Forensics Chuck Easttom 9781032785905 , Digital Signal Processing Oppenheim 9789332550339 , Digital Modulation & Coding Wilson 9788131721438 , Fundamentals Of Mobile Computing 2Ed Pattnaik Bks534717 , Introduction To Iot With Machine Learning And Image Processing Using Raspberry Pi Ambaji Kulkarni 9781032966885 , Biomedical Instrumentations And Measurements Cromwell 9789332556911 , Artificial Neural Networks For Engineers And Scientists Chakraverty S. 9781032729121 , Digital Communication Bhattacharya 9780070591172 , Signals And Systems 2/Ed Oppenheim 9789332550230 , Fundamentals Of Modern Vlsi Devices Yuan Taur 9781316649794 , Digital Systems:Principles&Design(Anna) Rajkamal 9789332535916 , Principles Of Cognitive Radio Vincent 9781107439900 , Digital Signal Processing 4Ed Proakis 9788131710005 , Op Amps And Linear Integrated Circuits Gayakwad 9789353949037 , Microwave And Radar Engineering Rao 9788131799444 , Introduction To Pspice Using Orcad For Circuits And Electronics Rashid 9789332555174 , Basic Electronics Saha 9781316632932 , Linear Integrated Circuits Salivahanan 9789353163808 , Principles Of Electronic Communication Orient 9789386235107 , Optoelectronic Devices And Optical Fiber Communication Chakrabarti 9789354667947 , Introduction To Vlsi Design Flow Sneh Saurabh 9781009200813 , Antennas And Wave Propagation Kraus 9789352606184 , Network Analysis Revised 3Ed Van Valkenburg/ Rathode 9789353433123 , Communication Systems : Analog And Digital, 3Rd Singh 9781259004605 , Internet Of Things The : How Smart Tvs Sm Miller 9789332552456 , Microwave Devices & Circuits 3Ed Liao 9788177583533 , Fundamentals Of Mobile Computing 2Ed Pattnaik Bks534717 , 5G Mobile And Wireless Communication Technology Pauline Cullen 9781009590921 , The Intel Microprocessors : 8086/8088,80186/80188,80286,80386,80486,Pentium, Pentium Pro Processor, Pentium Ii - 8Ed Brey 9788131726228 , Circuits Analysis Theory And Practic Robbins 9788131519028 , Medical Instrumentation 5Ed : Application And Design : An Indian Adaptation Webster 9789354249150 , Microwave Engineering, An Indian Adaptation Theory And Techniques Pozar 9789388991087 , Wireless Communications 2Ed Molisch 9789354248795 , Controll System Eng. 8/Ed Norman 9789357463980 , Signals, Systems, And Transforms, 4/E Phillips 9789332518490 , Antenna Theory And Applications 4Ed Balanis 9789354248474 , Gate 2025 Electronics And Communication Eng.Guide Gkp 9789356819306 , Introduction To Analog And Digital Communication 2Ed Haykin 9789354644337 , Digital Image Processing Gonzalez 9789353062989 , Power Electronics (An Indian Adaption) Ned Mohan 9789354640278 , Dorfs Introduction To Electric Circuits Wiley India Edition Richard 9788126573493 , Electronic Devices 10Ed Robert Floyd 9789354493935 , Communication Systems 5Ed Haykin 9789354640896 , Modern Control Engineering Ogata 9789332550162 , Electric Circuits With Mt Kang 9789386650344 , The Intel Microprocessors : 8086/8088,80186/80188,80286,80386,80486,Pentium, Pentium Pro Processor, Pentium Ii - 8Ed Brey 9788131726228 , Modern Digital Electronics-5Th Edtion Jain 9789355321770 , Analog And Digital Electronics Roth 9789353502355 , Introduction To Communication Systems Madhow 9781316608241 , Voip Handbook Application Technologies Ahson 9781420070200 , Embedded Systems Handbook 2Ed Network Embedded System Zurawski Bks331227 , Matlab: An Introduction With Applications 6Ed Amos Gilat 9789357462174 , Fiber Optic Communication Systems 5Ed Agrawal 9789357461245 , Crc Handbook Of Modern Telecommunications 2Ed Morreale Bks331221 , Mathematical Aspects Of Signal Processing Sircar 9781107175174 , Rf And Microwave Semiconductior Device Handbook Golio 9780849315626 , Electronic Systems Maintenance Handbook, Second Edi Whitaker Bks322864 , The 8051 Microcontroller Ayala 9788131502006 , Digital Systems Design Using Vhdl W/ Roth 9788131518304 , Fundamentals Of Engineering Electromagnetics Cheng 9789332535138 , Basic Electronics-2Ed Kothari 9789352606467 , Power Electronics Essentials & Applications Umanand 9788126519453 , An In Depth Guide To Mobile Device Forensics Chuck Easttom 9781032785905 , Automotive Embedded Systems Handbook Navet Bks335190 , Wavelet Analysis With Applications To Image Process Prasad 9780849331695 , Primer On Wavelets And Their Scintific Applications Walker 9781032963617 , Face Detectin And Recognition: Theory And Practice Datta A.K. 9781032728964 , Fiber Optics & Optoelectronics Khare 9780195669305 , Mobile Cellular Telecomm 2E Lee 9780070635999 , Cmos Vlsi Design : A Circuits And Systems Perspective, 3Ed Weste 9788131762653 , Antennas Blake 9789380381268 , Mobile Communications, 2Ed Schiller 9788131724262 , Introduction To Wireless Systems Black 9788131726389 , Ad Hoc And Wilreless Sensor Network Athawale 9789356066137 , Linear Integrated Circuits Sathishkumar Bks476847 , Linear Integrated Circuits Dhanasekar Bks638493 , Embedded And Real Time Systems Ramprabu Bks476848 , Transmission Lines And Rf Systems Shanmugaraja Sivakumar Bks490771 , Transmission And Distribution Gayathri Bks476751 , Wireless Communication Santhosh Krishna Bks638491 , Digital System Design Edwindhas Bks638462 , Power Quality & Distributed Generation Jayaprakash 9788184876987 , Digital Signal Processing Antoniou 9780070636330 , Power System Engineering 3 Ed Kothari 9789353165116 , Digital Integrated Circuit 2/Ed Rabeay 9789332573925 , Principles Of Electronic Materials Kasap 9789390113866 , Digital Logic Circuits With Vhdl And Verilog Programs Nagoor Kani 9789354669606 , Principles Of Electronic Materials Kasap 9789390113866 , Wireless Communications : Principles Rappaport 9789356066212 , Communication Networks Fundamentals Leon 9780070595019 , Interoperability In Iot For Smart Systems Roy M. 9781032728100 , Basic Elec & Linear Circuits Bhargava 9781259006463 , Brain Computer Interface Eeg Signal Processing Panigrahi 9781032851181 , Learning Basics And Electronic Science Through Mcqs Priya 9789394639249 , Fundamentals Of Logic Design Roth 9789360535650 , Engineering Circuit Analysis 10E/D Hayt 9789364441094 , Programmable Logic Controllers 6Th Ed Petruzella 9789355325860 , Modern Wireless Communication Haykin 9788131704431 , Signals And Systems 5Ed Ramesh Babu Bks505218 , Digital Signal Processing Ramesh Babu Bks503977 , Digital Image Processing 2Ed Sridhar Bks643706 , Digital Logic Circuits With Vhdl And Verilog Programs Nagoor Kani 9789354669606 , Wireless Communications : Principles Rappaport 9789356066212 , Digital Integrated Circuit 2/Ed Rabeay 9789332573925 , Brain Computer Interface Eeg Signal Processing Panigrahi 9781032851181 , Internet Of Nanothings And Wireless Body Area Networks Fadi 9781032599144 , Phyiscs For Electronics & Information Science Palanisamy 9789386923134 , Vlsi Design Sathyah Bks665018 , Basic Elec & Linear Circuits Bhargava 9781259006463 , Communication Networks Fundamentals Leon 9780070595019 , Linear Integrated Circuits Salivahanan 9789353160487 , Wireless Communications : Principles Rappaport 9789356066212 , Linear Integrated Circuits Salivahanan 9789353160487 , Digital Logic & Computer Design Mano 9789332542525 , Digital Electronics Bignell 9788131520710 , Design Of Analog Cmos Integrated Circuit-2Ed Razavi 9789387067844 , Fundamentals Of Logic Design Roth 9789360535650 , Engineering Circuit Analysis 10E/D Hayt 9789364441094 , Digital Electronics Bignell 9788131520710 , Design Of Analog Cmos Integrated Circuit-2Ed Razavi 9789387067844 , Applied Machine Learning Gopal 9789354601590 , Essentials Of Digital Signal Process Using Matlab Ingle/Proakis 9788131517727 , Arm System On Chip Architecture Furber 9789332555570 , Smart Grid In Iot Enabled Spaces Fadi Ai Turjman 9781032598543 , Power Plant Engineering Nag 9789354600050 , Mathematical Analysis A Straightforward Binmore 9781107526235 , Algebra 2Nd Edition Michael Artin 9789353432751 , Discrete Mathematics Dhami 9780199452798 , Statistics And Numerical Methods 10Ed Vijayakumari 9789356062733 , Algebra, 3Ed Sahai 9788173198250 , Algebraic Topology M J Greenberg , J R Harper 9780367475604 , Algebra, 4Ed Sahai 9788184876208 , Concept Of Modern Algebra Pandey 9788184877069 , Friendly Introduction To Number Theory Silverman 9789353433079 , Elementary Differential Equations 8Ed Richard 9789332571617 , Introduction To Graph Theory West 9789332549654 , Linear Algebra Ubaidullah 9789391549893 , Higher Algebra Barnard 9789385923326 , Sequences And Series Arumugam 9789388005128 , Modern Analysis Arumugam 9789388005111 , Intorduction Topology And Modern Analysis Simmons 9789387465916 , Higher Algebra Hall Knight 9788174731043 , Analytical Geometry Veerarajan 9789388005142 , Transforms And Partial Diffrential Equations 3Rd Ed Muthucumaraswamy 9789391549473 , Multilevel Analysis: Techniques And Applications 3/E Hox 9781032938035 , Thomas Calculus 15Ed Hass 9788119896608 , Calculus Vil I 2Ed ( An Indian Adaptation) Apostol 9789354642630 , Calculus 10Ed Saturmino Salas Einar Hille Ga 9789390421961 , Introduction To Linear Regresion Analysis, 6Ed Montgomery 9789357461283 , Matrices Advanced Calculus & Complex Stewart 9789360534509 , Operations Research Mote 9788126556380 , Topology 2Ed James Munkres 9789353432775 , Linear Algebra 5Ed Friedberg 9789390168132 , Multivariate Calculus Joshi Bks498996 , Mathematical Analysis 6Ed Malik Bks413195 , Stochastic Processes 5Ed Medhi 9789389802245 , Human Resource Management Aswathappa 9789355323675 , The Elements Of Complex Analysis 3Ed Choudhary 9789388818780 , Probability And Statistics For Engineering Devore 9789353506247 , Operations Research Panneerselvam 9789354437892 , The Elements Of Complex Analysis 3Ed Choudhary 9789388818780 , Optics 8Ed Ghatak 9789355328595 , Outline Of Beginning Physics Schaum 9789389538984 , Outline Of Astronomy Schaum 9789389538939 , Introductory Nuclear Physics 3/Ed Krane 9789354640834 , Physics Vol 2 5Ed David Halliday Resnick 9789354640438 , Physics For Scientists And Engineers Serway 9789355739223 , Non Conventional Energy Source Math 9789388005081 , Nuclear Physics Theory And Experiments 3Ed Roy 9788122449884 , Gravitation : Foundations And Frontiers (South Asian Edition) Padmanabhan 9780521178761 , Electricity And Magnetism Murugeshan 9789352837342 , Introductory Nuclear Physics Wong 9788126546060 , Modern Physics Murugeshan Bks367126 , Introduction To Electrodynamics South Asia Ed - 4/Ed David J. Griffiths 9781108822909 , Theoretical Astrophysics Vol 2 Padmanabhan 9781107400603 , Heat Thermodynamics And Statistical Physics Lal Subramanian Bks460942 , Classical Dynamic Of Particles Thornton 9788131518472 , Materials For Engineers And Technicians 7Ed Bolton 9781032973722 , Statistical Mechanics 2Ed (An Indian Adaption) Kerson Huang 9789354247736 , Atomic And Molecular Spectroscopy Rita Kakkar 9781108413206 , Laser Fundamentals Silfvast 9780521138475 , Engineering Chemistry 2E : Fundamentals And Applications Shikha Agarwal 9781108724449 , Organic Name Reations Sanjay Bari 9789389354737 , Basics Of Environmental Science Khosla 9788184874013 , Environmental Chemistry Singhu 9788122427318 , Biomaterials Principles And Applications Joon Park 9781032934167 , Organic Reaction Mechanisms Ahluwalia Bks366263 , Organic Synthesis Concepts And Methods 3Ed Pb 2014 Jurgen Hinri 9788126547227 , Engineering Chemistry Palanna 9789352605774 , Engineering Chemistry 2Nd Ed Wiley 9788126543205 , A Textbook Of Engineering Chemistry Dara Bks561640 , Engineering Chemistry Vairam & Kalyani 9788126543342 , Chemical Applications Of Group Theory Albert Cotton 9788194726364 , Environmental Science And Engineering Yuganath 9788183717014 , Environmental Science Isv 8Th/Ed Botkin, Killer 9788126534142 , Chemical Reaction Engineering 3Ed (An Indian Adaptation) Octave Levenspiel 9789354244605 , Outline Of Thermodynamics Schaum 9789389538540 , Textbook Of Chemical Engineering Thermodynamics Narayanan 9788120347472 , Communication Skills, 3Ed Sanjay Kumar 9789354978555 , English For Science & Technology-I Chellammal 9781009224796 , English For Science & Technology-Ii Francis 9781009251181 , Effective Technical Communication Rizvi 9789352605781 , Research Methodology Vinod 9789352863518 , Placement Interviews Skills For Success Anandamurugan 9780070700956 , Prowess Orient 9789354421242 , Research Methodology Panneerselvam 9788120349469 , Academic Writing A Handbook For Students Stephen Bailey 9781138615533 , Design Thinking In Technical Communication Jason C K Tham 9781041004356 , Principles Of Scientific And Technical Mohapatra 9789355327482 , Critical Thinking Idea Innovation And Creativity Richard H Mccuen 9781041000846 , Literature For Language Skills 2Ed Mahanand 9789388005470 , Academic Writing P.B Ajay Semalty 9789390211739 , Teaching English Through Folktales Mahanand 9789391549077 , An Introduction To Literary Studies Mario Klarer 9781032785974 , Heritage Of Tamils Muthuramalingam 9789391549718 , A Short History Of English Literature Saintsbury 9788174733054 , The English Language Wrenn 9788174733368 , An Introduction To The Study Of English Litetrature Hudson 9788174731197 , Rabindranath Tagores Ideational Challenges Bidyut Chakrabarty 9789356400122 , English Literature Long Bks476291 , Test Of Reasoning 7Th Edn Thorpe 9789389811513 , Science And Technology 8Ed Agarahri Ravi 9789355326324 , Excel Reasoning Arun Sharma 9789355329455 , Aptipedia Aptitude Encyclopedia 2 Ed Wiley 9788126569502 , Excel Quantitative Apititude Arun Sharma 9789355327970 , Verbal Ability And Reasoning For Competitive Examinations Anand Lalit Singh 9788126554294 , Intermediate Engligh Grammer With Answers, 2Ed Murphy 9788185618517 , Design Thinking Teun Den Dekker 9781032786018 , Spotting Errors Lakshminarayanan Bks670723
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Tamil Nadu View Result →
Jharkhand View Result →
West Bengal View Result →
12.
Railways #11271247 AOC
Bids Are invited for Field Telephone Cable (Telecommunication Cable) (Q2) Total Quantity : 2500
Contract Date: Ref. Documents Contract Value : ₹ 45,750
Government Departments No of Bidders 1
Maharashtra View Result →
13.
Power #11264734 AOC
Bids Are Invited For Prestressed Concrete Poles For Overhead Power Traction And Telecommunication Lines As Per Is 1678 (Q3) Total Quantity : 71500
Contract Date: Ref. Documents Contract Value : ₹ 29.47 Crore
Boards / Undertakings / PSU No of Bidders 9
Tamil Nadu View Result →
14.
Defence #11264019 AOC
Bids Are Invited For Telecommunication Cable - Fully Filled Petroleum Jelly Or Absorbent Thixotropic Gel (V2) (Q2) Total Quantity : 8000
Contract Date: Ref. Documents Contract Value : ₹ 17.46 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Delhi View Result →
15.
Railways #11261383 AOC
Bids Are invited for Boq Of 8 Items For Signal And Telecommunication Plastic Sheet Black Colour - Plastic Sheet Black Colour 15 Feet Wide Of Good Quality , Dungri Cloth - Dungri Cloth Colour White 91Point4 Cms Wide Pl 10 To 20 Mtrs As Per Is 3778 1966 , Painting Brush Size 4Inch - Painting Brush Size 4Inch Width With White Bristles For Painting , Painting Brush 2 Inch - Painting Brush 2 Inch Width With White Bristles For Painting , Wooden Handle Nylon Brush - Wooden Handle Nylon Brush 6 Inch Hard Bristle Stiffness , Rin Or Equivalent Washing Soap - Rin Or Equivalent Washing Soap Of 100 Grams Each , Washing Powder - Washing Powder Nirma Wheel Powder In 1Kg Packet , Washing Powder - White Soft Cotton Waste Of Good Class 1 Quality Total Quantity : 1038
Contract Date: Ref. Documents Contract Value : ₹ 70,968
Government Departments No of Bidders 4
Goa View Result →
16.
Chemicals and Fertilizers #11252449 AOC
Bids Are invited for Custom Bid For Services - Non-Comprehensive Service Contract For Signal And Telecommunication (S And T) Maintenance Works Of In-Plant At Railway Yard And Associated Facilities At Hurl Sindri
Contract Date: Ref. Documents Contract Value : ₹ 52.00 Lakh
Government Departments No of Bidders 3
Jharkhand View Result →
17.
Defence #11246636 AOC
Bids Are Invited For Telecommunication Cable - Fully Filled Petroleum Jelly Or Absorbent Thixotropic Gel (V2) Total Quantity : 2500
Contract Date: Ref. Documents Contract Value : ₹ 77,500
Statutory Bodies & Commissions/Committees No of Bidders 6
Madhya Pradesh View Result →
18.
Railways #11234570 AOC
Supply Of quarterly complete service maintenance , quarterly complete service maintenance, report generation and other repairs including mate rial and service part as per special conditions and following ? application software on cloud subscription wit h mapping, report generation and related assistant (gsm/gprs) telecommunication connection in the name of sse (p.way) as per dept. requirement recurring expenses with minimum usage pack from any service pr ovider consisting of (100 min. 2 of monthly call time, 100 nos. of sms). 2 per month and 1 0 0 mb2 per m onth internet data.)quarterly maintenance as per technical guidelines by railway board and. payment condition quarterly payment of amc .amc exten for 03month [ warranty period: 30 months afte r the date of delivery ] ]
Contract Date: Jun 06, 2026 Contract Value : ₹ 1.21 Lakh
Government Departments No of Bidders 1
Maharashtra View Result →
19.
Defence #11232135 AOC
Bids Are invited for Field Telephone Cable (Telecommunication Cable) (Q2) Total Quantity : 12800
Contract Date: Ref. Documents Contract Value : ₹ 1.95 Lakh
Government Departments No of Bidders 2
Gujarat View Result →
Haryana View Result →
21.
Coal and Mines #11226362 AOC
Bids Are Invited For Field Telephone Cable (Telecommunication Cable) (Q2) Total Quantity : 1000
Contract Date: Ref. Documents Contract Value : ₹ 15,254
Boards / Undertakings / PSU No of Bidders 1
Maharashtra View Result →
22.
Educational and Research Institute #11223212 Technical Bid
Tender For Supply And Fixing Of Mechanical Engineering Research Laboratory Furniture(Rp-157) Of New Academic Block At Smvd University, Kakryal, Katra , Research Lab, Mechanical Engineering, Smvd University Katra , Table For Cabin - Providing And Placing Of Main Table With Overall Size Of Table Shall Be 1500 Width Mm X 750 Depth Mm X 740 Height Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Work Top Shall Have The Size 1500Mm X 750Mm Made Up Of 25Mm Thick Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape With Front And Back Full Round Post Form And Other Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported Over Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 25Mm Thick Particle Board And Profile Shall Be In Linear Shape With Front And Back Full Round Post Form And Other Edge With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 660Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel Having To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor. Dimensions Tolerance + 20 Mm. , Table For Faculty Cabin - Providing And Placing Of Main Table With Overall Size Of Table Shall Be 2000 Width Mm X 750 Depth Mm X 740 Height Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Work Top Shall Have The Size 1500Mm X 750Mm Made Up Of 25Mm Thick Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape With Front And Back Full Round Post Form And Other Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported Over Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 25Mm Thick Particle Board And Profile Shall Be In Linear Shape With Front And Back Full Round Post Form And Other Edge With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 660Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel Having To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor.Dimensions Tolerance + 20 Mm. , Chair For Cabin & Faculty Rooms - Supplying And Placing Ergonomically Designed, Comfortable & Aesthetically Appealing Medium Back Chair. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Malaysian Plywood With Hr Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ Upholstered With Leatherite Tapestry In Black Colour With 0.8Mm Thick And 535 Gsm And The Back Shall Be Made Of Double Layered Malaysian Moulded Hot Pressed Plywood (12+6)Mm Thick With Hr Polyurethane Foam 30Mm Thick Having Density 32Kg/M³ Upholstered With Leatherite Tapestry In Black Colour With 0.8Mm Thick And 535 Gsm. Seat And Back Shall Be Joined With Hr Steel Sheet. The Armrest Shall Be Used Pp Arm Fixed Type Completely Joint With Seat. The Chair Shall Have Synchro Knee Tilt Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustable 100Mm With Bifma Standard Class-3 Gaslift. The Pedestal Shall Be Made Up Of Injection Moulded Black Nylon Having Pitch Circle Dia 700 Mm Fitted With 5 Nos. 50Mm Twin Wheel Castors Which Shall Be Made Of Injection Moulded Black Nylon 30% Glass Filled Having Self Lubricating Property For Friction Free Movemen With Bifma Standards. The Seat Size Shall Be 480±10Mm(W) X 495±10Mm(D) And Back Size Shall Be 590±10Mm(H) From Seat & Overall Height = 1030±10Mm. Dimensions Tolerance + 20 Mm. , Executive Table For Cabin 3 - Supplying & Installing Of Table With Eru And Pedestal Having Following Specifications. The Table Shall Be Supplied In Completely Knock Down Conditions With An Overall Size W1800 X D1800 X H750mm That Is To Be Assembled At Site. The Worktop Shall Have The Size 1800 X 900Mm Made Up Of 50Mm Thick Plpb With Approved Laminate And Finish As Per Approved Shade. The Top Edge Should Cladded With 1.2Mm Thick Extruded Aluminium Section All Around The Worktop And Die Cast End Caps On Joints For Better Strength Of The Table. The Profile Shall Be In Rectangle Shape And Enclosed By Flapper Box For Electric Provision. The Top Shall Be Supported On Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be 50Mm Thick Medium Density Fibre-Board Linear In Profile And The Edges Cladd With Extruded Aluminium Profile. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Particle Board And Shall Be Linear In Profile. The Table Shall Be Supplied With Credenza Unit With An Overall Size 900Mm X 450Mmmm That Shall Be Constructed From Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With 25Mm Thick Top And Other Parts 18Mm Thick Like Shutter, Back, Facia Etc. The Drawer And Shutter Shall Be Operated With Ball Bearing Sliding Channel And Concealed Crank Hinge. G-Profile Aluminium Handle Shall Be Supplied For Ease Of Opening. The Eru Unit Shall Be Mounted On 38Mm Dia. Leg. Fixed Pedestal Shall Be Supplied With An Overall Size 380Mm X 400Mm X 600Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Top Shall Be 25Mm Thick, Side, Back, Facia Shall Be 18Mm Thick. The Pedestal Shall Have 2 Nos. Of Drawer Having Same. The Drawer Shall Be Operated With Ball Bearing Sliding Channel To Enable Smooth Operation. Aluminium Handle Shall Be Provided For Ease Of Opening. For Locking Provision Central Lock Mechanism Shall Be Given In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted On Aluminium Round Leg. Dimensions Tolerance + 20 Mm. , Executive Chair For Cabin 3- Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50+25+30)Mm Thick Having Density (40, 32 & 32)Kg/M³ In Seat And (30+25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Hydraulic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Metal Insert Crca Covered With Natural Wood Having Pitch Circle Dia. 630 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 710±10 Mm(H) From Seat. Overall Height Shall Be = 1170±10 Mm & Overall Width/Depth = 740±10 Mm.. Dimensions Tolerance + 20 Mm. , Visitor Chair For Cabin 3 - Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50+25+30)Mm Thick Having Density (40, 32 & 32)Kg/M³ In Seat And (30+25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. The Frame Structure Shall Be Cantilever Support Type Made Of Ms Crca Powder Coated 50-60? (Dft) Thick Round Pipe Of Dia. 28.5Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 480±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 520±10 Mm(W) X 580±10 Mm(H) From Seat. Overall Height Shall Be = 1030±10 Mm, Overall Depth = 620±10 Mm & Overall Width = 620±10 Mm. Dimensions Tolerance + 20 Mm. , 2-Seater Sofa For Cabin 3 - Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Complete Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Consist Of Ss 202 Grade Loop Leg With Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1040±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1360±10 Mm, Overall Depth = 770±10 Mm & Overall Height = 800±10 Mm. Dimensions Tolerance + 20 Mm. , Centre Table For Cabin 3 - Providing And Supplying Centre Table With An Overall Size 1200Mm X 600Mm X 430Mm. The Top And Side Cladding Shall Be Made Up Of 36Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. Extruded Aluminium Section Shall Be Inserted Within Side Corner Edge At Both Side Of The Table. There Shall Be Leveller Shoe Provided At The Bottom. Dimensions Tolerance + 20 Mm. The Participating Brand Must Have All The Prevalent Quality & Safety Related Certifications Like Iso: 9001, Iso:50001, Iso:14001 & Iso: 45001 By Nabcb, Bifma Membership, Aiota & Greenguard Certification Has To Be Submitted. , Corner Table For Cabin 3 - Providing And Supplying Centre Table With An Overall Size 600Mm X 600Mm X 430Mm. The Top And Side Cladding Shall Be Made Up Of 36Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. Extruded Aluminium Section Shall Be Inserted Within Side Corner Edge At Both Side Of The Table. There Shall Be Leveller Shoe Provided At The Bottom. Dimensions Tolerance + 20 Mm. , Wooden Almirah For Cabin Faculty Room & Hall - Supplying & Placing Storage Unit With An Overall Size 900Mm X 450Mm X 2000Mm. Storage Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. All Profile I.E. Side, Back, Top, Shutter, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have 3 Nos. Of Adjustable Shelf And 1 Fixed Shelf. 2 Normal Shutter And 2 Glass Shutter Shall Be Provided For Closing And Opening The Shutter. The Glass Shutter Shall Be Made 4Mm Clear Glass Insert Within Aluminium Profile. The Shutter Shall Be Operated With Concealed Crank Hinge With Ss Handle As Well As Mp Lock Mechanism. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. Dimensions Tolerance + 20 Mm. , Steel Almirah For Cabin Faculty Room & Hall - Providing, Supplying And Placing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 915Mm (W) X 485Mm (D) X 1980Mm (H) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. All Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf & Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To Be Thickness 50-60?. Dimensions Tolerance + 20 Mm. , Steel Bookcase For Cabin & Faculty Room - Providing And Supplying Metal Book Case With An Overall Size 915 Mm (W) X 320 Mm (D) X 1750Mm (H). The Book Case Shall Be Supplied With 4 Nos. Of Individual Compartments. All Components Shall Be Made Of 0.8Mm High Yield Strength Crca Sheet Of Grade ‘D Confirming To Is: 513. Each Door Shall Have Individual Locking Provision And 4 Mm Thick Transparent Glass For Clear Inside Vision Secured In A Metal Frame Through Rubber Gasket. Each Door Shall Have Scissor Mechanism For Receding Inside The Top Of Respective Compartment Which Ensures Parallel & Smooth Movement. Each Door Shall Have Plastic Side End Caps As Handle Which Is Easy To Grip. Each Compartment Has A Storage Shelf Having Uniformly Distributed Load Capacity Of Each Shelf Is 40 Kg Maximum. The Finish Is Epoxy Polyester Powder Coated To The Thickness Of 40-60?. Adjustable Leveler Shall Be Provided With Metal Insert To Resist Scratches On The Floor And Also Level & Support Structure.Dimensions Tolerance + 20 Mm. , Visitor Chair For Cabin & Faculty Rooms - Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support With The Assistance Of Cushion. The Armrest Shall Be Cushion Arm With Leatherite Covering. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms/Crca Chrome Plated Circular Pipe Having Dia. 28.6Mm. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor As Well As Uneven Surfacing. The Seat Size Shall Be 480±10 Mm(W) X 460±10 Mm(D) And Back Size Shall Be 460±10 Mm(W) X 580±10 Mm(H) From Seat & Overall Height = 1020±10 Mm, Overall Width = 610±10 Mm & Overall Depth = 670±10 Mm. Dimensions Tolerance + 20 Mm. , Modular Conference Table - Supplying & Placing Conference Table In Completely Knock Down Conditions With An Overall Size 2400Mm X 1200Mm X 750Mm That Is To Be Assembled At Site. The Table Top Shall Have Same Size Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With One Side Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. Single Sided Flapper Box Shall Be Enclosed At Table Top That Houses Video, Audio, Data And Power Connection Discretely. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Have The Size 900Mm X 570Mm. The Gable End Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. The Modesty Panel Shall Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. The Table Shall Be Supported On Ss Pipe Leg 202 Grade. It Shall Have Cross Section Area 80Mm X 20Mm. There Shall Be Buffers Provided To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. Table Shall Be Provide A Flip Up/ Pop Up Box (Without Wires) 01 No. Dimensions Tolerance + 20 Mm. , Main Chair For Conference Table - Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of Natural Wood And Combination Of (18+6)Mm Thick Double Layered Moulded Commercial Plywood Padded With High Resilience Polyurethane Foam 70Mm Thick Having Density 40Kg/M³ In Seat And 70Mm Thick Having Density 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Lumbar Support As Well As Head Support. The Chair Shall Be Supplied With Polypropylene Chrome Cushion Arm With Leatherite Covering Top Pivot Joint With Back. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Injection Moulded Polypropylene With Chrome Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma X5.1-2011 Standards Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 500±10 Mm(W) X 720±10 Mm(H) From Seat. Overall Height Shall Be = 1180±10 Mm, Overall Depth = 670±10 Mm & Overall Width = 710±10 Mm. Dimensions Tolerance + 20 Mm. , Chairs For Conference Table - Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of Natural Wood And Combination Of (18+6)Mm Thick Double Layered Moulded Commercial Plywood Padded With High Resilience Polyurethane Foam 70Mm Thick Having Density 40Kg/M³ In Seat And 70Mm Thick Having Density 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Lumbar Support. The Chair Shall Be Supplied With Polypropylene Chrome Cushion Arm With Leatherite Covering Top Pivot Joint With Back. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Injection Moulded Polypropylene With Chrome Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma X5.1-2011 Standards Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 500±10 Mm(W) X 520±10 Mm(H) From Seat. Overall Height Shall Be = 980±10 Mm, Overall Depth = 670±10 Mm & Overall Width = 710±10 Mm. Dimensions Tolerance + 20 Mm. , Discussion Table- Supplying & Placing Conference Table In Completely Knock Down Conditions With An Overall Size Dia. 900Mm X 750Mm That Is To Be Assembled At Site. The Table Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Circular Shape And The Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding. The Table Understructure Shall Be A Combination Of Ms Powder Coated And Pre-Laminated Particle Board. There Shall Shoe Provided At The Base To Avoid Scratches On The Floor. Table Shall Be Provide A Flip Up/ Pop Up Box (Without Wires) 01 No. Dimensions Tolerance + 20 Mm. , Chair For Discussion Table - Supplying And Placing Lounge Chair. The Seat Shall Be Made Of 12 Mm Thick Hot Pressed Plywood Upholstered With High Resiliance Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ With Leatherite Tapestry 0.8Mm Thick 535 Gsm And The Back Shall Be Made Of Wooden Frame Upholstered With High Resiliance Moulded Polyurethane Foam 25Mm Thick Having Density 32Kg/M³ With Leatherite Tapestry 0.8Mm Thick 535Gsm. The Frame Structure Shall Be 4 Legs Support Type Made Up Of Reducing Pipe Frame Powder Coated Tubular Pipe Having Cross-Section Area Dai 19Mm Thick. The Seat Size Shall Be 430±10 Mm (D) X 450±10 Mm (W) And Back Size Shall Be 500±10 Mm (W) X 400±10 Mm (Ht) From Seat. Overall Height Shall Be = 840±10 Mm, Overall Depth = 540±10 Mm & Overall Width = 580±10 Mm. Dimensions Tolerance + 20 Mm. , Modular Workstation For Hall - Supplying & Placing Modular Workstation In Completely Knock Down Conditions With Size :- W1200 X D600 X H750/1200Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure. The Worktop Shall Have The Size 1200Mm X 600Mm Made Up Of 25Mm Thick Re Lam Particle Board With Laminate And Sealed With 2Mm Thick Pvc Edge Banding. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Plpn. Partition :- 60Mm Thick Panel Based Partition Of Height 1200Mm Having Provision Of Fabric / Soft Pin Up Board/ Laminate / Race Way. Worktop :- 25Mm Thick Plpb Board With Pvc Edge Banding. All Aluminum Parts Shall Be Pretreated And Duly Powder Coated Of 40?-50? Thick. Raceway Shall Be Provided Of Aluminum Below The Work Top As Per Requirement For Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Curve Trims. The Trims Shall Be Made Of Aluminum Extrusions Of Size 60X19mm With 1.5Mm Thick And Should Be Covered With Die Cast End Caps On Joints, 2 Ways, 3 Ways & 4 Ways Caps As Required. Wire Management Partition Shall Have Concealed Wire Management Capabilities And Shall Be Engineered For Responsive And Safe Operations Of Power, Telecommunications And Data (Lan) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots/Cutouts Shall Be Provided On Raceways To Fix All Electrical And Data Points. Mobile Pedestal :- (2D + 1F) 18Mm Thick Plpb Board With Pvc Edge Banding, Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. A Nylon Castor Based Cpu Unit Shall Be Provided With 18Mm Thick Plpb. Dimensions Tolerance + 20 Mm. , Chair For Workstations - Providing And Supplying Medium Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat Shall Be Made Of 18Mm Thick Hot Pressed Commercial Plywood Upholstered With High Resilience Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ With Foam Net Tapestry 0.9Mm Thick And 300 Gsm And The Back Shall Be Made Of Injection Moulded Polypropylene Net Cover Upholstered With Breathable Mesh Tapestry. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine With Adjustable Lumbar Support. The Chair Shall Be Supplied With Injection Moulded Pu Adjustable Arm Completely Joint With Seat. For Seating Durability The Chair Shall Have Actice Bio-Synchro Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 100Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Beinjection Moulded In 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 520±10 Mm(W) X 500±10 Mm(D) And Back Size Shall Be 495±10 Mm(W) X 610±10(H) From Seat & Overall Height = 1010±10 Mm. Dimensions Tolerance + 20 Mm. The Participating Brand Must Have All The Prevalent Quality & Safety Related Certifications Like Iso: 9001, Iso:50001, Iso:14001 & Iso: 45001 By Nabcb, Bifma Membership, Aiota & Greenguard Certification Has To Be Submitted. , 2 Door Lockers For Hall - Providing And Placing In Position Personal Locker Unit Shall Be Of Dimensions 380Mm(W) X 450Mm(D) X 1800Mm(H) Having 2 Locker Unit. Each Locker Shall Have 1 Nos. Of Hanging Rod. Locking Shall Have Cam Lock With Lock Lever Plus Option. Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. Dimensions Tolerance + 20 Mm. , 3 Door Lockers For Hall - Providing And Placing In Position Personal Locker Unit Shall Be Of Dimensions 380Mm(W) X 450Mm(D) X 1800Mm(H) Having 3 Locker Unit. Locking Shall Have Cam Lock With Lock Lever Plus Option. Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. Dimensions Tolerance + 20 Mm. , 4 Door Lockers For Hall - Providing And Placing In Position Personal Locker Unit Shall Be Of Dimensions 380Mm(W) X 450Mm(D) X 1800Mm(H) Having 4 Locker Unit. Locking Shall Have Cam Lock With Lock Lever Plus Option. Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. Dimensions Tolerance + 20 Mm. , Lab Over Head Unit- Providing And Fixing Lab Over Head Unit With Overall Dimensions 750(W)Mm X 320(D)Mm X 675Mm(H). Over Head Unit Shall Be Welded Body With Load Bearing Members Such As Top, Bottom And Stiffeners Made Of 0.8Mm Thick Crca Sheet. The Storage Unit Shall Be Provided With A Shelf Made Of 0.8Mm Thick Crca Sheet. Each Shelf Shall Have Load Carrying Capacity Of 30-40 Kgs. Mp With 180 Degree Cam Lock. Semi Recessed Handle And Ss Hinge. Shutter Shall Be Provided With A Mp Lock. , Laboratory Lab Stools- Providing And Placing In Position Ht. Adjustable Stool With Back. The Seat Shall Be Made Up Of 1.2±0.1Cm Thick Flat Plywood And With Moulded Polyurethane Foam And Are Upholstered With Replaceable Synthetic Leather Covers. The Dimensions Of Seat Shall Be Diameter 40.0 Cm And Adjustments Are 360° Revolving Type. The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Upholstery Shall Be Available In Synthetic Leather. The Dimensions Of Back Shall Be 45.0 Cm (W) Covered With Polyurethane Foam. The Hr Polyurethane Foam Shall Be Moulded With Density = 40 +/-2 Kg/M3. The Five-Prong Pedestal Shall Be Fabricated From 0.2 ± 0.02 Cm Thick Hr Sheet ( Is : Dd 1079/ Hr ), Powder Coated ( Dft 40-60 Microns ). The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Dimensions Tolerance ±20 Mm.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 6
Jammu And Kashmir View Result →
23.
Environment and Forests #11209209 AOC
Bids Are invited for Prestressed Concrete Poles For Overhead Power Traction And Telecommunication Lines As Per Is 1678 (Q3) Total Quantity : 2400
Contract Date: Ref. Documents Contract Value : ₹ 8.28 Lakh
Government Departments No of Bidders 6
Chhattisgarh View Result →
24.
Housing Urban and Rular Development #11201480 AOC
Bids Are invited for Prestressed Concrete Poles For Overhead Power Traction And Telecommunication Lines As Per Is 1678 (Q3) Total Quantity : 140
Contract Date: Ref. Documents Contract Value : ₹ 26.43 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
25.
Railways #11190604 AOC
Bids Are Invited For Telecommunication Cable - Fully Filled Petroleum Jelly Or Absorbent Thixotropic Gel (V2) (Q2) Total Quantity : 2500
Contract Date: Ref. Documents Contract Value : ₹ 8.00 Lakh
Government Departments No of Bidders 1
Maharashtra View Result →
26.
Defence #11165216 AOC
Bids Are Invited For Telecommunication Cable - Fully Filled Petroleum Jelly Or Absorbent Thixotropic Gel (V2) Total Quantity : 5000
Contract Date: Ref. Documents Contract Value : ₹ 10.70 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Madhya Pradesh View Result →
27.
Educational and Research Institute #11161433 Price Bid
Procurement Of Equipment, Instruments, Machinery, Tools Etc. Related To Laboratories And Workshops Of Electronics And Telecommunication Engg., Engineering Physics, Engineering Mechanics Of Mirik Government Polytechnic, Mirik, Dist. Darjeeling, 734214 , Spherometer (Screw Pitch 0.05 Mm And Lc 0.005 Mm) , Concave Mirror (Focal Length 20 Cm) , Convex Mirror (Focal Length 20 Cm) , Concave Surface (Focal Length 20 Cm Diameter 50 Mm) , Hooks Law Apparatus (Consisting Of 30 Cm Long Mirror Scale, Spring, Slotted Weights With Hanger And Pointer, Complete On Heavy Tripod Stand) , Mercury (Distilled Liquid Mercury, Grade Std.-Biotech Grade) , Flywheel Apparatus (Thickness: 4.4 Cm Diameter :20 Cm) , Cantilever (Length 100 Cm, Hook At One End, C Clamp) , Light Weight Hanger (Metal Slotted Weight Mechanics Physics Experiment Equipment Set With Hook With Weight Of Each Mass Of The Order Of 50Gm Or 100 Gm) , Inverse Square Law Apparatus (Optical Bench, Photocell Housed With Red And Black Sockets, Lamp House With Lamps, Dc Microammeter) , Stopwatch (Digital Stopwatch With Ms Count) , High Resistance Box (Resistance Box Plug With 1 To 10 K Ohm Resistance) , Winch Crab Single Purchase With Weight [Experiment Set Up Winch Crab Single Purchase- Fitted With Heavy Cast Iron Wall Brackets The Grooved Wheel Is Of 25 Cm Diameter And Gears Are Machine Cut.String, Weight Box With Pan. ] , Winch Crab Double Purchase Without Weight [Experiment Set Up Winch Crab Single Purchase- Fitted With Heavy Cast Iron Wall Brackets The Grooved Wheel Is Of 25 Cm Diameter And Gears Are Machine Cut. ] , Worm And Worm Wheel Single Without Weight [Experiment Set Up Consisting Of Machine Cut Worm Gear Of 25 Cm Diameter, Carrying A Metal Drum On 12 Cm Diameter, And Machine Cut Worm On Steel Spindle Carrying A 12 Cm, Complete With Effort Pulley, String With Pan.] , Worm And Worm Wheel Double Without Weight [Experiment Set Up Consisting Of Machine Cut Worm Gear Of 25 Cm Diameter, Carrying A Metal Drum On 12 Cm Diameter, And Machine Cut Worm On Steel Spindle Carrying A 12 Cm, Complete With Effort Pulley, String With Pan.] , Wheel & Axle Simple Without Weight [Standard Setup For Lab.] , Simple Screw Jack With Weight [Experiment Set Up Screw Jack ( Weights)All Metallic Construction Accurately Machine Cut Screw With A Pitch Of 5 Mm Carrying A Double Fanged Turn Table Of About 20 Cm Diameter. Fitted On A Heavy Cast Iron Base And Complete With Two Adjustable Pulleys, Cord And Hook. Weights Are Included.] , Combined Inclined Plane & Friction Slide Apparatus Iron Base & With Weight [Standard Setup For Lab.] , Parallel Forces Apparatus [Experiment Set Up Simple Supported Best Type Supported At Its End. For Verification Of Condition Of Equilibrium Of Parallel Forces, Law Of Lever & Forces On Beam Etc. Consisting Of Two Compression Thrust Type 10 Kg Tubular Spring Balances Fixed On Wooden Polished Board, A Wooden Beam With Steel Back Plate. Complete With Two Strups, Hooks & Two 10Kg Weights. ] , To Verify Lami’S Theorem [Gravesand Apparatusboard: Wooden With Metal Base Pulley: Z-Pullies (2 Nos) With Adjustable Distance Weight Set: 5X50 G (3 Sets). ] , Simple Jib Crane Apparatus Iron Stand With Weight [Experiment Set Upwith Consisting Of A Tubular Compression Balance, Pivoted About An Axis Fitted To The Base. The Tie Chain Has An Adjustable Angle Bracket And Fitted With A 10Kg Extension Balance. Completion Wooden Base With 1.2 Meter Jib. With Weights. ] , Mini Drafter, T Square, Protractor, Set Squares, Compass, Divider [Made Out Of Wood. To Be Used In Chalk Board] , Model Of Geometric Constriction (Solid Cube, Solid Primed, Cylinder, Cone, Hexagon, Tetrahedron ) [Made Out Of Wood. To Be Used In Chalk Board] , Amplitude Modulation And Demodulation Trainer Kit [Message Signal:100 Hz To 2.8 Khz, Carrier Signal 28 Khz To 108 Khz,Modulation : Balanced Modulator, Amplifier : Op Amp Based, Demodulation : Diode Detector & Lpf(6Th Order)] , Frequency Modulation Anddemodulation Kit [On-Board Message Signal With Variable Amp/Freq,On Board Carrier Signal Fm Modulation Using Xr 2206Ic,Demodulation Using Pll Detector And Lpf 4Th Order Lpf,Internal Power Supply +5V , +12V/ 500 Ma] , Super Heterodyne Am Radio Receiver Trainer Kit To Measure Sensitivity, Selectivity And Fidelity [On Board Variable Capacitor Tuning,Receiving Antenna,Local Oscillator,Bfo, Rf Amplifier, Mixer,If Amplifiers, Detectors, Agc,Audio O/P Amplifier, Speaker.Frequency Range: 400Khz To 1700Khz,If Frequency: 455 Khz.] , Pam, Pwm And Ppm Modulation And Demodulation Trainer Kit [Provides Sine Waveform Output Of 250Hz, 500Hz, 1 Khz, And 2 Khz With Amplitude Adjustments Of 0 - 5Vp-P. Switch Selectable Sampling Clock Of 4, 8, 16, 32 Khz. On-Board Features Analog Sample Circuit/Output, Sample & Hold Circuit/Output, Flat Top Circuit/Output, 4Th Order Butterworth Low Pass Filter With Cut Off Frequency Of 3.4 Khz.] , Analog Signal Sampling & Reconstruction Trainer Kit [±15V D.C. At 100Ma, Ic Regulated Power Supply, A.F. Signal Generator For Modulating Signal.Sampling Clock Generator To Provide Sampling Clock And Gate Pulse. Modulator Circuit For Flat-Top Natural And S/H Circuit. Demodulator Circuit To Reconstruct Input (Sinewave)] , Telephone Receiver Trainer Kit [Line In Section : One Dot Line Connection Port.Handset : One Handset Connection Port. Keyboard : 4X3 Matrix Keyboard.Dialer : Tone And Pulse. Facilities : Redial Up To 32 Digits, Mute, Redial, Flash, Pause Switches.Indicators : Line In, Hook, Tone And Ringer, Call Mute Section.Control : Ringer Volume Control, Ringer Speed Control.Speech Path : Fully Non-Blocking.Dial Pulse Ratio : 10 Pps + / - 10%.] , 100Mhz Digital Oscilloscope [Bandwidth: 100 Mhz, 2 Analog Channels+ Ext With Probes Included Rise Time: =3.5 Ns, Real-Time Sample Rate Of 1 Gsa/S 1% Dc Gain Accuracy Should Support Rs232/Uart, I2c And Spi Bus Triggers And Decodes Usb And Ethernet Connectivity] , 30Mhz Analog Cro [Dual Trace Dual Channel Oscilloscope. Bandwidth: 20Mhz. Full Bandwidth Sweeping Circuit , Tv-H / Tv-V Synchronization And Trigger-Lock To Observe All Kinds Of Signals Stably. Y Deflection Operation: Y1, Y2, Alt, Chop, Add, Mode.Horizontal Sweep Mode: Auto, Trig, Lock, Single.X-Y Mode Input: X-Axis Yi And Y-Axis Y2.] , 2 Mhz Function Generator [Frequency: 1Hz – 2 Mhz Sine, Square, Triangle, Ttl Output] , Digital Storage Oscilloscope (100 Mhz) [Bandwidth 100 Mhz, Channels: 2+, Display: Tft Color Lcd Of Suitable Size (Capacitive Touchscreen). Sampling Rate: 1 Gsa/S Real Time, Sampling Mode: Normal, Average (2, 4, 8, 16, 32, 64, 128, 256), Peak Detect. Mathematics: A+B, A-B, A×B, Fft (Fast Fourier Transform). Fft Windows: Rectangle, Hanning, Hamming, Blackman. Auto Measurement: Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay1-2 (Rise), Delay1-2(Fall) ] , Trainer Kit For Rectifier With And Without Capacitor Filter For : — (A) Half-Wave Rectifier, (B) Full-Wave Rectifier, (C) Bridge Rectifier [Transformer Rating : 9-0-9V/200Ma, Rectifiers : Half Wave; Full Wave - Bridge, Center Tapped Rectifier,On-Board Dc Voltmeter : 0 - 20V,On-Board Ac Voltmeter : 0 - 20V,Load : Variable Resistive Load 10K,Filter Circuit : In-Built- Capacitor (3Nos.),In-Built- Inductor (1No.),Input Line Voltage : 230V Ac ± 10%, 50Hz] , Push-Pull Amplifier Trainer Kit [I.C Regulated Power Supply : +6 V.Digital Ac Voltmeter: 0 – 20 V.Digital Ac Milliammeter : 0 – 200 Ma.Set Of Resistances.Set Of Capacitors.Two Transistors Cl 100 And Ck 100.Connecting Wire.] , Fet Characteristics Trainer Kit [Variable Dc Regulated Power Supply Of 0-5V At 250Ma. Dual Range Dc Voltmeter Of 1.5V/15V.Dc Ammeter Of 0-20Ma.] , To Determine Frequency Response Characteristics Of Rc Coupled Amplifier Circuit And Calculation Of Bandwidth, Midband Gain, Input Impedance And Output Impedance For: (A) Single-Stage Amplifier (B) Double-Stage Amplifier [Sine Wave Oscillator 15Hz To 150Khz In Four Ranges With Amplifier & Amplitude Adjustable.Three Decade Resistances Bank In Steps Of 1K, 10K & 100K Per Steps Total Step 30.Two Pnp Transistors.] , Mosfet Characteristics Trainer Kit [On Board Ammeter And Voltmeter,Dual Variable Dc Power Supplies,On Board Mosfet And Fet With Resistors To Perform Experiments] , To Study The Input And Output Characteristics And To Find The H-Parameters Of A Bjt For : — (A) C-E Configuration, (B) C-C Configuration, (C) C-B Configuration [Power Supply 1) 0-1V Dc 2) 0-10V Dc.Meters Dc 65Mm Four Dial V, V , Ma Ua/ Ma.Transistor Cl100/ Similar] , Component Development System [Power Supplies On Boards 0-15 V And 0-30 V, 250 Ma Each Variable.Fixed Dc Regulated Power Supplies 15 V/250 Ma And 5 V/250 Ma.Ac Power Supply 15-0-15 V For Rectifier Applications.Various Components On The Trainer Set. ] , Kcl & Kvl Trainer Kit [Two Dc Ic Regulated Power Supplies 0-12 V/150 Ma, Two Mr65 Square/Digital Meters For Voltage & Current Measurement, 4 Mm Patch Cords Are Provided With The Trainer For Interconnections, Power Cords 230 V, 50 Hz] , Thevenin’S And Norton’S Theorems Trainer Kit [Power Supply 2?3?0?V, Regulated & Short Circuit Proof Variable Dc Voltage Source – 01 No. Fixed Resistance Of Different Values. Dc Voltmeter.Dc Ammeter. Glass Fuse For Short Circuit Protection. On/Off Switch With Indication Light. Patch Cords Suitable To The Terminals With Board For Easy Interconnection.All Above Accessories Will Be Fitted On Bakelite Sheet Fixed On Box.] , Superposition Theorem Trainer Kit [Instrument Comprises Of Two Fixed Output Dc Regulated Power Suppliesof 12V & 5V At 500 Ma Current, Three Moving Coilmeter, Circuit Diagram Printed On The Front Panel & Connections Ofsupplies, Meter & Resistances Brought Out At 4Mm Sockets. ] , Maximum Power Transfer Theorem Trainer Kit [Ammeter 30Ma Dc. Voltmeter 12V Dc. Power Supplies: Dc Supply Ic Regulated 0-12V Dc, 150Ma. Operated On Mains Power 230V, 50Hz +10% Components Are Mounted On The Panels Are: Resistances 2Watts Variable Resistor Voltage Control Through Potentiometer. Fuse For Short Circuit Protection. Patch Cords 4Mm.] , Reciprocity Theorem Trainer Kit [Instrument Comprises Of One Fixed Output Dc Power Supply Of 12V At 300 Ma Current, Two Moving Coil Meters, Circuit Diagram Printed On The Fornt Panel & Connections Of Supplies, Meters & Resistances Brought On Terminals.] , Series And Parallel Resonant Circuit Trainer Kit [Analog Meters: Ammeter 20Ma Ac. Voltmeter 20V Ac. Components Mounted On The Panels Are: 3 Nos. Of Resistors Selected By Rotary Switch. 3 Nos. Of Capacitors Selected By Rotary Switch. 3 Nos. Of Inductors Selected By Rotary Switch.] , Low Pass And High Pass Filter( Rc & Lc) Constant K Type Trainer Kit [Instrument Comprises Low Pass Circuit Rc Type Instrument Comprises Low Pass Circuit Lc Type Instrument Comprises High Pass Circuit Rc Type Instrument Comprises High Pass Circuit Lc Type Instrument Fitted In Highly Shockproof Plastics Box] , T And ? Type Attenuator Trainer Kit [Instrument Comprises Ofdc Ic Regulated Power Supplies 0-15V/150Ma. Two Mr65 Square / Digital / Round Meters For Voltage & Current Measurement. T And Pie Network Provided On The Board. Variable Resistor Using Band Switch Is Mounted On The Board. Instrument Fitted In Highly Shockproof Plastics Box. Sufficient No Of 4Mm Patch Cords For Interconnection Instruction Manual For Student Workbook. Power Cords 230V, 50Hz] , To Study Standing Wave Pattern For A Transmission Line Of Finite Length With: (A) Open Termination, (B) Short Termination, And © Matched Termination. [Transmission Line : Coaxial Cable 100M ( 25M X 4 Nos) Impedance Matching Resistance : 0 To 100 ( 02 Nos ) Test Generator : 1. Sine Wave : 4 Khz To 4 Mhz. 2. Square Wave : 10 Khz. Interconnections : 4 Mm Sockets On All Input / Output Connections. Test Points : 10 On Board Circuit Mimic : Illustrates Functional Blocks For Ease Of Experimentation Power Requirement : 230V 10% 50Hz, 1 Ac. Accessories Provided : I. Set Of Patch Cords. Ii. Bnc To Bnc Cable. Iii. Bnc To Crocodile. Iv. Detailed Instruction Manual.] , Digital Trainer Kit (Experiment 1. -To Verify The Truth Table Of Not, Or, And, Nand, Nor, Xor, X-Nor With Ttl Logic Gates And Cmos Logic Gates. Experiment 2.- To Realize Different Boolean Expressions With Logic Gates. Experiment 3.-To Realize Half-Adder, Full-Adder, Subtractor, Parallel And Serial Full-Adder. Experiment 4-To Design 1’S Complement, 2’S Complement And 9’S Complement Adder-Subtractor.) [Dc +5V , 400Ma; Dc +12V, 250Ma; Dc -12 V, 250Ma, Dc0 To + 30V: Variable 100Ma,Ac Output: 12V-Ct-12V, 150Ma; Logic Data 8-Bit Debounced Set/Clear Ttl Output With Bicolour Led; Clock Generator I Hz To 200Khz Variable & Manual, Ttl & /Ttl(Complement) With Bicolour Led;Logic Probes 8-Bit 3-State Led Display High, Low, High Impedance; Function Generator Sine, Square, Triangle, 1 Hz To 250 Khz;Bread Boards : 3 X 820 Tie-Points; Total Short Circuit Protection From Any To Any Point On Board] , Complete Setup To Implement The Truth Table Of Encoder,Decoder, Multiplexer And De-Multiplexer. [The Trainer Kit Should Be Able To Verify The Truth Tables Of Truth Table Ofencoder,Decoder, Multiplexer And De-Multiplexer.] , Complete Setup To Design/Construct Parity Generator, Checker And Comparator. [Industry Standard Specification To Perform Relevant Experiments. ] , Flip Flop Trainer Kit [Kit For Verification Of Jk, Sr, D, And T Flip-Flop Truth Tables] , Complete Setup To Design / Construct Binary Synchronous And Asynchronous Counter. [Industry Standard Specification To Perform Relevant Experiments. ] , Complete Setup To Design / Construct Programmable Up/Down Counter. [Industry Standard Specification To Perform Relevant Experiments. ] , Complete Setup To Design Controlled Shift Register And Study Their Function. [Industry Standard Specification To Perform Relevant Experiments. ] , Trainer Kit To Study Different Memory Ics [Industry Standard Specification To Perform Relevant Experiments. ] , A/D & D/A Converter Trainer [Industry Standard Specification To Perform Relevant Experiments. ] , Trainer Kit To Interface Ttl And Cmos Ics. [Industry Standard Specification To Perform Relevant Experiments. ] , 8051 Trainer Kit [Operating Frequency : 10Mhz Crystal,40-Pin Ic Base | 40Pin-Zif Socket,2×16 Char Lcd Display,32 I/O Pins,32Kb-Sram,32Kb-Eeprom.] , Ct-31/51 Or 8031/51 Microcontroller Trainer Kit With Led Display, Usb Interface & Inbuilt Power Supply [Operating At 10/12 Mhz, On Board 8K Ram,8/16K Bytes Of Eeprom,48 I/O Lines,Hexadecimal Keyboard And Six Seven Segment Displays,Rs-232C Interface,Usb Interface] , Ct-31/51Lcdadu8031/51 Microcontroller Trainer With Lcd Display, Usb Interface, Adc, Dac& Inbuilt Power Supply [Trainer Based On 8051/89C52 Microcontroller.On Board 32K Ram.64 K Bytes Of Eeprom.20 X 2 Lcd Display.48 I/O Lines. Onboard Adc & Dac.] , Adc Interface Module [Usb Interface, Adc Module Module 10 Channel 12Bit Ad Sampling Data Acquisition Stm32 Uart Communication Adc Module] , Dac Interface Module [Operating Voltage 2.7-5.5 V. Interface Type I2c. Resolution 12 Bits.] , Lcd Display Module [Display Contents :16 * 2 Characters (5*8 Dots ). Lcd Size :80 X 36 Mm .Lcd Thickness :9.5 Mm.] , Keyboard Interface Module [5X4 Keys Matrix Keyboard. ] , Dc Motor Controller Module [Driver Module : L298n. Motor Supply Voltage (Max.): 46V.Motor Supply Current (Max.): 2A. ] , Stepper Motor Controller Interface Module [Robocraze Stepper Motor(28Ybj-48 Dc 5V 4 Phase 5 Wire) + Uln2003 Driver Board Compatible With Arduino] , Trafic Light Controller Module [Led Traffic Lights Signal Module/Digital Signal Output Traffic Light Module] , Temperature Measurement Module [Electrobot Dht11 Digital Temperature & Humidity Sensor Module For Arduino And Rpi] , Operational Amplifier Trainer Kit ( Ic 741 ) [Inbuilt Variable/Fixed Dc Regulated Power Supplies.Output Voltages : 0-5Vdc (2Nos.) (Variable), +12Vdc (Fixed).Transistor & Components Provided Ic : 741.Transistor : Cl 100 (Npn).] , Active Filter Trainer Kit (Lpf, Hpf, Bpf) [Opamp Based First Order Lpf, Hpf, Bof Trainer Kit (Mi-A14)] , Application Of Ic555 Timer Trainer Kit (Astable & Monostable Mv) [In-Built Regulated Dc Power Supply.On Board Manual Pulse Generator For Triggering The Monostable And Bistable Circuit.Inbuilt Led Output Indicator.Symbols And Diagram Are Printed On Glass Epoxy Pcb.] , Opamp Based Oscillator Trainer Kit ((A) Hartley, (B) Colpitt, (C) Phase Shift, (D) Wein Bridge) [Op-Amp Oscillator Trainer Mi-A13. Frequency 50-60 Mhz.] , Crystal Oscillator Trainer Kit (741 Based) [Industry Standard Specification To Perform Relevant Experiments. ] , Function Generation Kit (Using Icl8038) [Icl8038 Function Signal Generator Sine Triangle Wave Kit Diy Professional K5e8.Uses Icl8038 And High-Speed Op Amp, Higher Accuracy. Low Distortion Sine Wave: 1%.] , Voltage Regulator Trainer Kit (Using Ic723) [0-35V D.C. At 250Ma, Countinously Variable Unregulated Power Supply.D.C. Milliammeter, 65Mm Rectangular Dial With Switch Selectable Ranges Of 50Ma And 250Ma.D.C. Voltmeter, 65Mm Rectangular Dial With Switch Selectable Ranges Of 10V And 40V.Ic 723 Fitted On Base.Three Potentiometers.] , Function Generator Trainer Kit [Frequency Ranges: 1? Hz To 1?0? Hz, 1?0? Hz To 1?0?0? Hz Fuse:3?5?0? Ma, Slow Blow Automation Grade: Manual Power Supply:Max 2?3?0?V Ac, 5?0? Hz +/- 1?0?%] , Maxwells Bridge Trainer Kit [The Kit Contains A Bridge With Provision For Connections Of Capacitors And An Unknown Inductor. In Built Ac Supply [ 1 Khz And 2 Vpp ] And Dc Supply [ +5 V ] On Board. Two Nos Dial Resistances [ 50 Ohm To 200 Ohm ] And [ 1 Ohm To 11 Ohm ] In Step. A Dc And Ac Null Detector Using Selector Switch. A Dial Type Variable Capacitor [ Range 0.2 Uf Ro 1.2 Uf ] And Six Nos. Unknown Inductors [ Range 1 Mh To 12 Mh ].] , Lvdt Trainer Kit [Excitation Source Built In Ac Source 2.5 Khz Sine Approx. L.V.D.T. In Non Metallic Structure. Micrometer One (For Displacement) Displacement Range 10Mm. Test Points Sockets At Different Places For Signals. Potentiometer Two For Zero & Calibration Adjust Display (Mm) 3.5 Digit Digital Power Supply Ic Regulated Phase Detection Balanced Demodulator Power Supply Short Circuit &Overload Protected Mains 230V/50Hz Ac] , Strain Gauge Trainer Kit [Strain Gauge: 4 Mounted Upon Cantilever 150X3.5X3.5Mm, Stable Dc Voltage For Strain Gauge Bridge, Opamp Based,Precision Instrumentation Amplifier With Variable Gain,Potentiometer For Zero And Calibration Adjust,3.5 Digit Display For Strain/Weight, 230V 50Hz Ac] , Temperature Transducers Kit Using (A) Rtd (Pt-100) (B) Thermistor. [12 - 0 - -12 V 500Ma To Drive Digital Integrated Circuitry. 5 - 0 - -5 V 250Ma To Drive A To D Converter Signal Conditioning And Amplifying :Analog To Digital Converter. Display : 31/2 Digit Led Display Of 200 Mv Fsd Initial Set : Single Turn Potentiometer To Set Initial Temperature ( Room Temperature) Final Set : Single Turn Potentiometer To Calibrate The Instrument ( Max. Temperature) Select : 2 Way Rotary Switch To Select Rtdand Thermistor. Power On : Rocker Switch To Control Power Supply To The Instrument.] , Calibration Of A Single-Phase Energy Meter By Phantom Loading Trainer Kit [Usage/Application: Lab Experiment Connection:4?-Mm Patch Cord Single Phase Automation Grade:Manual Power:2?0?0? W Voltage:2?2?0?-2?4?0? V] , Calibration Of A Voltmeter Using Crompton Potentiometer Trainer Kit [This Trainer Is Supplied Along With Highly Regulated Dc Power Supplies To Operate The Unit. Further To Calibrate Pmmc Meters, Necessary Ratio Boxes Also Provided. Resistors Used In This Unit For Coarse And Fine Are Very Standard Type Made Of Manganin. This Enable The User To Measure The Potential In A Circuit Close To Micro Volts. Necessary Schematic/Wiring Diagram Printed On The Panel To Follow And Conduct Experiments. User Manual And 4Mm Patch Cords Supplied. Accessories Included: Necessary Dc Power Supplies, Ratio Boxes & Galvanometer Are Provided Alongwith The Unit.] , Cro Demonstration Kit [Crt : 6Rectangular Screen With Internal Graphical 8X10 Division (1Div-1Cm) Vertical Deflection Display : Ch1, Ch2, Add, Alt & Chop Deflection Factor : 5Mv/Div To 5V/Div +3%, 1Mv/Div To 1V/Div, +5% (X5), 10 Steps Rise Time : <17.2Ns Maximum Input Voltage : 250 (Dc + Ac Peak Value) When <1Khz (250V, Dc +Ac) Input Coupling : Ac, Dc & Gnd Polarity Selection : + (Ch2 Only) Display Mode : 1, 10 & X-Y Horizontal Deflection Time Base : 0.2Us/Div To 0.2S/Div, 9 Ranges Sweep Expansion : X10 Accuracy : +3% Triggering Mode : Auto, Norm, Tv-V, Tv-H Triggering Source : Int, Line & Ext. Trigger System Auto : 20Hz-20Mhz Norm : 0.5 Div Int, 0.5 Vp-P Ext Tv-H : At Least 1 Div Or 1 Vp-P Input Impedance : 1Mohm X-Y Phase Difference : <3 Degree, Dc-50 Khz Calibration Waveform : Frequency 1Khz 2%,Voltage 0.5 V 1%, Block Diagram Printed On The Top Panel, Power Requirement: 220 Vac +10% , 50 Hz] , Q-Meter Kit Formeasurement Ofq Of Coils. [Inductance Range:199.9Mµh-19.99H Resistance Range (Ohm):19.99O-19.99M? Capacitance Range:199.9P-1.999?F Capacitance Accuracy: ±(1%±2) Digital Lcr Bridge Meter Power:220 Volts/50Hz ±10%] , Spectrum Analyzer Trainer Kit [Industry Standard Specification To Perform Relevant Experiments. ] , Public Address System Trainer Kit [To Test The Performance Of Loudspeaker And Microphone; Power Output: 100W Rms At 10% Thd Pre-Amplifier Output: 200Mv; Line Output: 1V/ 1K?; Input Channels: Mic: 2Nos; Frequency Response : 65 Hz To 15 Khz +/- 3Db Tone Controls : Bass, Treble, Master 1Control; Speaker Outputs : 4 , 8 , 16 , 70-100V Line Matching; Speakers : 2 Nos; Microphones : 2 Nos(Dynamic Microphone)] , Demonstration Kit Of Black & White Tv Trainer [To Learn The Practical Aspects And Faults Which Would Occur Often In The Black And White Tv. All The Fault Switches Are Provided To Conduct Fault And Observe The Output. The Test Points Are Provided To Determine The Voltages At The Different Sections Of The Tv And Observe The Signal Output Of The Various Sections. The Output Is Monitored On A 20” Picture Tube.] , Demonstration Kit Of Colour Pattern Generator For Colour Tv [They Should Be Able To Make Various Patterns, Including Vertical Bar Patterns, Horizontal Bar Patterns, Circle Patterns, 100% White Patterns, Check Patterns, Horizontal Bar Patterns, Vertical Bar Patterns, Color Bar Patterns, Red Color Patterns, Green Color Patterns, Blue Color Patterns,Yellow Color Patterns, Magenta Color Patterns, And Cyan Color Patterns. Learning Materials To Be Included: Theory, Procedure, Reference Results, Etc.] , Demonstration Kit Of Colour Led Tv Trainer [Display Type: Led; Hd Screen Size: 24 Inch (50Cm) Or More; Display Resolution: 1600 X 900 Pixels Or More; Video Interface: Video Input/ Vga, Hdmi And Or Dvi Input; Audio Output Power: 8W X 2; Receiving System: Pal Bg/I/Dk And Ntsc; Channel Coverage: Vhf-2-12, Uhf21-69; Catv (X~Z+2, S11s41) Mains Supply: 110-260V Ac ± 10%, 50/60Hz; Power Consumption: 35W] , Demonstration Kit Of Dth Trainer Kit [Colour Tft Lcd: 5.7” Tft Lcd; Rf Input: 950 - 2150 Mhz; Rf Output: 470 Mhz Two 862Mhz; Video Output: Pal/Ntsc; Uplink Satellite: Insat 4B; Test Points: 34 Nos.; Included Accessories: Mains Cord, Power Supply, Remote, Dish Antenna With Accessories, Lnb] , Demonstration Kit Of Photocopier [Interface Hi-Speed Usb 2.0 Copy Speed Simplex To Simplex Up To 20 Ppm In A4 (21 Ppm In Letter) Scan Method Color Cis Compatibility Twain, Wia Fault-Creating Facilities For Crum, Thermistor, Stepper Motor, Pickup Clutch, Feed Sensor, Width Sensor, Scanner Stepper Motor, Scanner Sensor, And Printer Door. Various Fault Switch With Test Points Provided On-Board.] , Demonstration Kit Of Fully Automatic Washing Machine Trainer Kit [Semi/Fully Automatic Washing Machine Mechanical Controls 30 Minutes Timer, Wash/Spin Control Atleast 6 Liter Capacity Machine Fault Switches For Wash Motor, Spin Motor, Lid Opening, Buzzer Etc All Faults Are Mounted On Pcb With Enclosure] , Demonstration Kit Of Microwave Oven Trainer Kit [Type: Solo; Capacity: >15 Ltr; Power Consumption: 600 Watt Or More: Child Lock And Alarm, Various Test Points] , Demonstration Kit Of Refrigerator [Industry Standard Specification To Perform Relevant Experiments. ] , Demonstration Kit Of Air Conditioner. [Industry Standard Specification To Perform Relevant Experiments. ] , Tdmpulse Code Modulation Trainer Kit [Crystal Frequency: 12/16 Mhz On Board Generators, 1. Adjustable Amplitude Sine Generator Of 500Hz & I Khz (Synchronised) 2. Variable Amplitude Dc Level (2 Nos.) Input Channels: Two Multiplexing: Time Division Multiplexing Modulation: Pulse Code Modulation Sync Signals: Pseudo Random Sync. Code Modulation Error Check Code: Off, Odd, Even, Hamming Operating Modes: Fast 240 Khz Channel (Approx) And Slow I Khz Channel (Approx) Pc - Pc Communication: 2 Channel Via Rs 232 Baud Rate: Selectable From 300 To 2400 Fault Switches : 8 Nos. Through 8 Way Dip Switch For Troubleshooting At Different Blocks Should Include Various Test Points] , Tdm Pulse Code Demodulation Trainer Kit [2 Channel Time Division Multiplexed Pulse Code Modulation Receiver. Fast (240 Khz/Channel Approx) And Slow (1Hz. /Channel Approx.) Mode Of Operation Pseudo Random Sync. Code Generator For Frame Synchronization. Receiver Clock Generation Using Pll. Error Detection Of None, Even, Odd, Hamming. Error Correction Using The Hamming Code Technique None, Even, Odd, Hamming Parity Selections Two Nos. Of 4Th Order Butterworth Low Pass Filter With Cut Off Frequency Of 3.4 Khz. Four Switched Faults For Fault Selection Block Description Screen Printed On Glassy Epoxy Pcb] , Fdm Transmitter / Receiver Kit [Two Variable Modulating (Sinusoidal) Input Channels With Provision Of Voice Inputs Two Dsbsc Modulators For Frequency Band Translation Of Two Test Signals Two Carrier Generators Two Sets Of Audio Input Amplifier One Adder/Transmission Amplifier Two Demodulators Two Low Pass Filters For Smooth Output] , Ask / Psk / Fsk Modulation And Demodulation Kit [The Kit Should Have An Integrated Ask / Psk / Fsk Modulation And Demodulation. Various Functional Block Diagrams Are Provided On-Board For Teaching/Training. Test Points To Visualize The Signals On Oscilloscopes] , Microwave Test Bench (Klystronbased) [Complete Klystron-Based Test Bench Study Of The Characteristics Of The Klystron Tube And To Determine Its Tuning Range, To Determine The Frequency & Wavelength In A Rectangular Waveguide Working On Te 10 Mode, It Should Also Be A Ble To Study Characteristics Of The Directional Coupler, Attenuator And Isolator.] , Microwave Test Bench (Gunn Based) [To Study The V-I Characteristics Of Gunn Diode, To Study The Voice Communication By Using Microwave Test Bench, To Study The Following Characteristics Of Gunn Diode, It Should Also Be A Ble To Study Characteristics Of The Directional Coupler, Attenuator And Isolator.] , 24 Awg Tinned Single Strand Jumper Wire Spool Blue Colour [90 Meter Spool] , 24 Awg Tinned Single Strand Jumper Wire Spool Green Colour [90 Meter Spool] , 24 Awg Tinned Single Strand Jumper Wire Spool Red Colour [90 Meter Spool] , 24 Awg Tinned Single Strand Jumper Wire Spool Black Colour [90 Meter Spool] , Flexible Electric Wire [2 Core, Twisted Flexible, Red And Black, 0.5 Sq Mm Copper Core, 50M Length] , Soldering Wire [Flux Core, Coil Type (Wire Of 100Gm )] , Inductor 1 Mh [8X10 Mm Radial Leaded Power] , Inductor 10 Mh [8X10 Mm Radial Leaded Power] , Led Red, Green, Blue, White Colour. Fifty Numbers Of Each Colour Led. [0.5W, Through Hole Type] , Ic 7400 [Ttl Ic-Quad 2-Input Nand Gate] , Ic 7402 [Ttl Ic-Quad 2-Input Nor Gate] , Ic 7404 [Ttl Ic-Hex Inverter Gate] , Ic 7408 [Ttl Ic-Quad 2-Input And Gate] , Ic 7432 [Ttl Ic-Quad 2-Input Or Gate] , Ic 7486 [Ttl Ic-Quad 2-Input Xor Gate] , Ic 7474 [Ttl Ic-Dual D Positive Edge Triggered Flip-Flop, Asynchronous Preset And Clear] , Ic 7476 [Ttl Ic-Dual J-K Flip-Flop, Asynchronous Preset And Clear] , Ic 7490 [Ttl Ic-Decade Counter (Separate Divide-By-2 And Divide-By-5 Sections)] , Ic 7495 [Ttl Ic-4-Bit Shift Register, Parallel In, Parallel Out, Serial Input] , Ic 74200 [Ttl Ic-256-Bit Ram (256X1)] , Ic 74147 [Ttl Ic Encoder] , Ic 74138 [Ttl Ic 3 To 8 Line Decoder] , Ic74151 [Ttl Ic Multiplexer] , Ic74138 [Ttl Ic Demultiplexer] , Ic 74169 [Ttl Ic Up-Down Counter] , Ic 74180 [Ttl Ic Parity Checker/Generator] , Ic 74Ls83 [Ttl Full Adder With Carry Ic] , Ic 74330 [Ttl Ic-Pla (12 Inputs, 50 Terms, 6 Outputs)] , Ic 4077 [Cmos Ic Xnor Gate] , Ic 4001 [Cmos Ic Nor Gate] , Ic 4011 [Cmos Ic Nand Gate] , Ic 4070 [Cmos Ic Exor Gate] , Ic 4071 [Cmos Ic Or Gate] , Ic 4077 [Cmos Ic Ex-Nor Gate] , Ic 4081 [Cmos Ic And Gate] , Ic 4093 [Cmos Ic Nand Gate] , Ic74ls47 [Bcd To 7-Segment Decoder/Driver Ic (7447 Ic) Dip-16 Package] , Lts542 [7-Segment Display - Common Anode] , Lts543 [7-Segment Display - Common Cathode] , Ic Dac0808 [Dac0808 8-Bit Digital To Analog D/A Converter Ic Dip-16 Package] , Ic Adc0809 [Adc0809 8-Bit A/D Converter With 8-Channel Multiplexer Ic Dip-28 Package] , Ic723 [Voltage Regulator Ic Input Voltage Up To 40V Output Voltage Adjustable From 2 To 37V Positive Or Negative Supply Operation Series, Shunt, Switching Or Floating Operation Output Current To 150Ma Without External Pass Transistor Adjustable Current Limiting] , Icl8038 [Function Generator Ic Wide Frequency Range - 0.001Hz To 300Khz Variable Duty Cycle - 2% To 98% High Level Outputs - Ttl To 28V Simultaneous Sine, Square, And Triangle Wave Outputs] , Ad633 [Analog Multiplier Ic 4-Quadrant Multiplication Low Cost, 8-Lead Soic And Pdip Packages Complete—No External Components Required Laser-Trimmed Accuracy And Stability Total Error Within 2% Of Full Scale Differential High Impedance X And Y Inputs High Impedance Unity-Gain Summing Input Laser-Trimmed 10 V Scaling Reference] , Lm566 [Vco Ic Wide Supply Voltage Range: 10V To 24V Very Linear Modulation Characteristics High Temperature Stability Excellent Supply Voltage Rejection 10 To 1 Frequency Range With Fixed Capacitor Frequency Programmable By Means Of Current, Voltage, Resistor Or Capacitor] , Ic Ne555 [Ne555 Timer Ic Dip-8 Package, Pack(Set) Of 30 Ics] , Ic 741 Op-Amp (Dip) [741 Ic - Dip Package - General Purpose Op-Amp Ic, Pack(Set) Of 50 Op-Amps] , Transistor 2N3904 [Pack (Set) Of 20 Transistors] , Transistor Bc107b [Pack (Set) Of 20 Transistors] , Diode 1N4007 [Pack (Set) Of 50 Diodes] , Fet- Bfw10 [Pack (Set) Of 50 Field Effect Transistors] , Zener Diode 5.6V, 1W [Pack (Set) Of 20 Zener Diodes] , Potentiometer 1 K?, 10 K?,100 K? Power Rating: 1W [20 Nos Of Each Value] , Wire Stripping Pliers, 6 Inch Long [Stainless Steel, Rust Resistant.] , Long Nose Mini-Pliers [Stainless Steel, Rust Resistant.] , Resistor 33O, 56O, 68O, 82O, 100O, 120O, 200O, 220O, 270O, 330O, 390O, 470O, 680O, 1K?,1.5K?. Maximium Power Rating 1/4W [Pack(Set) Of 50 Nos Of Each Resistor Value] , Resistor 2.2K?, 2.7K?, 3K?, 4.7K?, 5.6K?, 6.8K?, 8.2K?, 10K?, 20K?, 36K?, 56K?, 68K?, 100K?, 470K?, 1M?, 2M? Maximium Power Rating: 1/4W [Pack(Set) Of 50 Nos Of Each Resistor Value] , Disk Ceramic Capacitor Of Values 220 Pf, 0.01 ?F, 0.024?F, 0.1?F, 0.24?F [Pack(Set) 25 Nos Of Capacitors For Each Valueh] , Disk Ceramic Capacitor Of Values 10?F(63V), 100?F, 220?F, 470?F(50V) [Pack(Set) Of 25 Nos Of Capacitors For Each Value] , Polypropylene Capacitor Of Values 0.001 ?F,0.01 ?F, 0.1 ?F, 0.22 ?F [Pack(Set) Of 25 Nos Of Capacitors For Each Value] , Tantalum Capacitor 10 ?F (25 V) [Pack(Set) Of 25 Capacitors] , Incandescent Bulb, 40W, 100W, 200 W [With Tungstenfilament And B22 Connector]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 10
West Bengal View Result →
28.
Defence #11145950 AOC
Bids Are Invited For Track Light , Designation Clip For Disconnection Telecommunication Voice Module , Light Emitting Diode Driver Total Quantity : 384
Contract Date: Ref. Documents Contract Value : ₹ 1.55 Crore
Statutory Bodies & Commissions/Committees No of Bidders 3
Delhi View Result →
29.
Coal and Mines #11142439 AOC
Tender for Miscellaneous Pre-Monsoon Preparatory Works Including Signalling & Telecommunication (S&T) Works At New Railway Siding Under Sonepur Bazari Area.
Contract Date: May 21, 2026 Contract Value : ₹ 1.69 Crore
Boards / Undertakings / PSU No of Bidders 3
West Bengal View Result →
30.
Public Administrative Department #11124705 AOC
Bids Are Invited For Telecommunication Cable - Fully Filled Petroleum Jelly Or Absorbent Thixotropic Gel (V2) (Q2) Total Quantity : 4000
Contract Date: Ref. Documents Contract Value : ₹ 3.00 Lakh
Government Departments No of Bidders 6
Tamil Nadu View Result →
31.
Civil Aviation #11123494 AOC
Bids Are Invited For Telecommunication Cable - Fully Filled Petroleum Jelly Or Absorbent Thixotropic Gel (V2) (Q2) Total Quantity : 300
Contract Date: Ref. Documents Contract Value : ₹ 1.05 Lakh
Boards / Undertakings / PSU No of Bidders 5
Assam View Result →
32.
Railways #11102424 AOC
Supply Of supply of cat-6 utp patch cord of length 2 mtr.,and 5mtr length, pvc switch board cable 5pair/, 10 pair,20 pair, pvc switch board cable 20 pair/0.5mm, supply of ofc patch cord 3 mtrs ,5 mtrs, ofc patch cord (sc-sc-30 nos. & sc-lc-40 nos.) of 10 mtrs supply of 20 pair aluminium ct box , krone poly carbonated disconnection telecommunication voice, 100 pair krone ct box ,krone type fibre box, supply of 25 mm x 16 mm size double locking pvc casing/caping ,solder wire 63/37 sn/pb,dia , hmt cord for push button auto telephone.,line cords both sides rj-11 connectors., supply of cable insertion tool. , pvc switch board cable 10 pair/0.5mm,as per tec spec no- gr/wir-06/03, mar-2002 with la test amendment [ warranty period: 12 months after the date of delivery ] ] , supply of 20 pair aluminium ct box to spec no.-irs:tc 18/75. [ warranty period: 12 month s after the date of delivery ] ] , supply of drop wire pvc insulated 0.5mm dia copper conductor single pair as per tec specifi cation g/wir06/02 or latest. [ warranty period: 12 months after the date of delivery ] ] , supply of cat-6 utp patch cord of length 2 mtr. it shall comply to tec gr no. tec/gr/slc - 01/02.aug 05 (tec standard number: tec 52010:2005) with latest amendments,version. [ warranty peri od: 12 months after the date of delivery ] ] , supply of krone poly carbonated disconnection telecommunication voice module brand: kro ne or similar [ warranty period: 12 months after the date of delivery ] ] , supply of ofc patch cord 3 mtrs length (sc-lc-100 nos and sc-sc-100nos)make digisol/d-lin k or similar. [ warranty period: 12 months after the date of delivery ] ] , supply of cat-6 patch cord 5mtr length similar to digisol/d-link make. [ warranty period: 12 months after the date of delivery ] ] , supply of pvc switch board cable 5 pair/0.5mm, as per spec no- irs:tc 24/91. [ warranty p eriod: 12 months after the date of delivery ] ] , supply of ofc patch cord 5 mtrs length (sc-lc-100 nos,sc-sc-75nos, lc-lc-25 nos.)make di gisol/d-link or similar. [ warranty period: 12 months after the date of delivery ] ] , supply of ofc patch cord (sc-sc-30 nos. & sc-lc-40 nos.) of 10 mtrs length as draft rdso s pecn. no. rdso/spn/tc/69/2007 or latest for connecting fiber to the equipment. [ warranty period: 12 m onths after the date of delivery ] ] , supply of 100 pair krone ct box with lsa plus disconnecting modules. [ warranty period: 1 2 months after the date of delivery ] ] , krone type fibre box indoor surface installation complete with modules and locks suitable for 50 pair. [ warranty period: 12 months after the date of delivery ] ] , solder wire 63/37 sn/pb,dia 1.2 mm, make-philco ,cookson ,khosala or similar. [ w arranty period: 12 months after the date of delivery ] ] , hmt cord for push button auto telephone. [ warranty period: 12 months after the date of delivery ] ] , line cords both sides rj-11 connectors. [ warranty period: 12 months after the date of deli very ] ] , supply of cable insertion tool. make : adc, model : lsa plus insertion krone tool, part no. 60 89 2003- 00 or similar. [ warranty period: 12 months after the date of delivery ] ] , supply of krone type fiber box indoor surface installation complete with module and locks sui table for 20 pair. [ warranty period: 12 months after the date of delivery ] ] , supply of 25 mm x 16 mm size double locking pvc casing/caping isi mark. [ warranty peri od: 12 months after the date of delivery ] ] , pvc switch board cable 20 pair/0.5mm,as per tec spec no- gr/wir-06/03, mar-2002 with la test amendment. [ warranty period: 12 months after the date of delivery ] ]
Contract Date: May 18, 2026 Contract Value : ₹ 19.84 Lakh
Government Departments No of Bidders 1
Odisha View Result →
33.
Defence #11072753 AOC
Bids Are Invited For Telecommunication Cable - Fully Filled Petroleum Jelly Or Absorbent Thixotropic Gel (V2) (Q2) Total Quantity : 2000
Contract Date: Ref. Documents Contract Value : ₹ 1.44 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Tamil Nadu View Result →
34.
Housing Urban and Rular Development #11066672 Price Bid
Tender For Annual Repair, Maintenance Operation Armo Works Of Civil Electrical Including The Repair And Camc Of Em Equipments At Esis Hospital, Branch Office, Dispensary And Residential Quarters At Margao, Goa, - Epoxy, Grouting Mortar/Admixtures Waterproofing Chemicals Aluminum Sections Float Glass/Mirror Aluminum Composite panels Tile Joint Filler Silicone Sealants Paints Texture Paints Something Polish Melamine Stainless Steel Railings Vitrified Tile Ceramic Tile Cement Gypsum Ceiling Mineral Fibre Tiles Door Accessories C CLASS PIPES (MS/GI) PIPE FITTINGS WELDING RODS RUBBER GASKETS ENAMEL PAINTS PAINT PRIMER ELECTRICAL MCBS/ MCB ISOLATORS/RCCBS/ ELCBS/ RCBOS/ MCB DISTRIBUTION BOARDS/ PRE-WIRED DBS- SINGLE/ THREE-PHASE (VERTICAL & HORIZONTAL- SINGLE/DOUBLE DOOR POLY CARBONATE MCBDB MCCBS CHANGE OVER SWITCH (OFF LOAD/ON LOAD) METAL CLAD SHEET STEEL ENCLOUSER SOCKET/PLUG BOX SFU/PSU HRC/HBC FUSES & BASES AUTOMATIC SWITCHES( BASED) TRANSFER SOLONOID LOAD BREAK SWITCHES FR/FRLS/ FIRE SURVIVAL PVC INSULATED COPPER WIRES/ CABLES (SECURED OR OTHERWISE) MODULAR PLATE SWITCHES AND SOCKETS ELECTRONIC ENERGY METERS SINGLE/ THREE PHASE & TRIVECTOR LUMINARIES PVC CONDUIT (ISI MARKED) STEEL CONDUCT (ERW) (ISI MARKED) FLEXIBLE CONDUIT BAKELITE SHEET TELECOMMUNICATION CABLE TV COAXIAL CABLE CONTROL & INSTRUMENTATION CABLE COMPUTER/DATA CABLE VOLTAGE TRANSFORMERS CURRENT TRANSFORMER MEASURING INSTRUMENTS CEILING FAN EXHAUST FAN/AXIAL FLOW FAN/VENTILATION FAN TAG BLOCK VCB/ HT SWITCHGEAR (11/33KV) ACB (3/4POLE) MV/LV SWITVHGEAR HT/LT CABLE (PVC/ XPLE/ FIRE SURVIVAL) AUTOMATION POWER FACTOR CONTROL RELAY CAPACITORS CABLE GLANDS (DOUBLE COMPRESSION EARTHING LINKS) WITH BI-METALLIC CABLES LUGS/ PVC GLANDS CABLE JOINTING KITS CABLE TRAYS (FACTORY FABRICATED)/RACEWAYS BATTERY (SEALED MAINTENANCE FREE) BATTERY CHARGER DG SET EARTH LEAKAGE RELAY SINGLE PAHSING DEVICE PUSH BUTTONS TIME RELAY DEVICE SELECTOR SWITCHES ROTARY SWITCHES INDICATING LIGHTS TERMINALS STREET LIGHT FIXTURES (HALOGEN/ PL/ METAL. HALIDE/MV/5V) MS SWAGED TUBLAR POLE STREET LIGHT POLES TELEPHONE OUTLETS MOTORS EPBAX SYSTEM & TELEPHONE LIGHTING UNIT UIS PROTECTION STARTERS (SOFT/ DOL/ AUTOMATIC STAR DELTA/ SUBMERSIBLE PUMPS BUTTERFLY VALVES DUAL VALUES PLATE CHECK BALANCING VALVES GLOBE VALVES TEMP/PRESSURE GAUGE WITH ISOLATING VALVE CONTROL INSTRUMENTATION CABLE ACB (3/4 POLE) MCCB MCB MEASURING INSTRUMENTS HRC FUSE & FITTINGS CURRENT TRANSFORMERS CONTACTORS STARTER OVERLOAD RELAYS INDICATING LIGHTS SELECTOR/ TOGGLE/ROTTARY SWITCHES CHANGE OVER SWITCH TIME DELAY DEVICE SINGLE PHASE DEVICE FUSE SWITCHES/SWITCH FUSES/ SWITCHES ISOLATING ELECTRICAL PANEL/ SUB- PANEL AHU PANEL CABLE GLANDS (DOUBLE COMPRESSION EARTHING LINKS) WITH PVC GLANDS/CABLE LUGS ELEVATORS Fire suppression system C CLASS PIPES (MS/GI) PIPE FITTINGS FIRE/CLEAR WATER PUMPPS ELECTRIC MOTORS 2/3/4 WAY SUCTION/ COLLECTION HEAD GM VALVES MS/CI VALVES FIRE HYDRANT VALVES (15 CODE 5290) INLET BRANCH PIPE BREACHINGS/ FIRE HOSE PIPES (IS CODE 636 II) RUBBER PIPE FOR HOSE REFL SPRINKLERS INCLUDING PLATES) (ALL TYPES ROSETTE FIRST AID FIRE HOSE REELS (IS CODE 884) RRL HOSE (IS 636) C.L. BUTTERFLY VALVES WATER TYPE NRVS CL DOUBLE FLANGED NRVS (IS CODE 780) GATE VALVE SPRAY NOZZLE BALL VALVE VIBRATION ISOLATOR SUMP PUMPS/ DEWATERING PUMPS PRESSURE SWITCH PRESSURE GAUGE EXPANSION/ DASH/ANCHOR/ FASTENERS WELDING RODS RUBBER GASKEIS HOSE DRUM MECHANICAL SEAL STRAINER WATER FLOW SWITCH INSTALLATION VALVE CONTROL PROTECTIVE TAPE CL. PIPES CLASS LA DIESEL ENGINE ENAMEL PAINTS PAINT PRIMER CONTROL & INSTRUMENTATION CABLES POWER CABLES PUMP PANELS Cement (Grey) Steel Floor Tiles (Mosaic) ISI marked Floor Tiles (Chequerred) (151 markedonly) C.P. Brass Cock, Pillar Cock, Stop Cock etc. (151 marked only) C.P. Brass Shower Rose 125 mm dia C.P. Brass Towel rail C.P. Brass Flush Valve (ISI Marked) C.P. Brass Waste Coupling Urinal Stalls (ISI Marked only) Squatting Pan (ISI Marked only) P.V.C. Flush Tank (ISI Marked only) Wash Basin (ISI Marked only). Water Closets (ISI Marked only) Kitchen Sink (Fire Clay) (ISI Markedonly) (IS771) G.L. Pipes (ISI Marked only) PVC Tanks (ISI Marked) C.L. Pipes (ISI Marked only) (15:1536) D.L. Pipes Flush Door Shutters (ISI Marked only) Aluminium Door Fittings (151 Markedonly) Oxidised M.S. Door Fittings (151 Marked only) Black Enamelled M.S. Hinges (151) Marked only) Steel Door/Windows Frames Mortice Locks (ISI Marked only) Steel Sectional /Ventilators Windows Particle Board / Plywood (ISIMarked) Aluminium Extruded Body Diecast Door Closures (ISI Marked only) (IS: 3564) Stone Ware Pipes Grade A (ISI Marked only) Centrifugally Cast Soil Pipes (15 Marked only) C.I. Rain Water Pipes (ISI Marked only) UPVC Rain Water Pipes (ISI Markedonly) (IS: 13592) Steel Tubes for Structural purpose (151 Marked only) (IS: 1161) Manhole Covers (ISI Marked only) (IS 1726) Water Proofing Compound. (ISIMarked only) Ceremaic Floor Tiles Ceremaic Wall Tiles Putty (ISI Marked only) (IS: 419) Anodized Aluminium Section (151) Marked only) Factory made concrete blocks White cement (ISI Marked only) Glass sheet (Float Plain) (ISI Markedonly) PTMT Ball Cock (ISI Marked only) PTMT Accessories (ISI Marked only) G.L Fittings Clamps for pipes Gate Valves (ISI Marked only) CPVC Pipes External Premium Acrylic Paint External Smooth Acrylic Paint Acrylic Plaster Interlocking Paver Blocks Vitrified floor tiles Oil Bound Washable Distemper/ Acrylic distemper Cement Primer Red Oxide Zinc Chromate primer Plastic Emulsion Paint Synthetic Enamel Paint Pigment Plaster of Paris Epoxy Paint Plastic seat with lid PVC shutters & frame PVC Rigid Pipes RMC Plant APP Sheet for water proofing treatment Acrylic Polymer Rusticide Passivator Water Proofing Compound
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Goa View Result →
35.
Defence #11060227 AOC
Bids Are invited for Goods Transport Service – Per Km Based Service - Household/Office, Valuable Goods Requiring High Security, Telecommunication; Tata Yodha; Medium Duty
Contract Date: Ref. Documents Contract Value : ₹ 5.98 Lakh
Government Departments No of Bidders 7
Andaman And Nicobar Islands View Result →
36.
Power #10972638 AOC
Bids Are invited for Led Batten 40 Watts - Led Batten 40 Watts 1150Mm, Lumen Watt 110 Housing Material Aluminium , Switch Socket Combination With Box - Pianotype Switch Socket Combination,20 Amps , Cables Pvc 2 Pair Copper, Telecommunication Cable, 0.5 Mm , Pvc 5 Pair Telecommunication Cable, 0.5 Mm Copper , Hand Held Searchlight , Type - Led 55 Watt, Dragon Light - Night Ranger Hand Held Searchlight , Type - Led 55 Watt, Dragon Light, Diameter 176 To 200 Mm, Battery Li Ion 10 Ah ,Rechargable , Miniature Circuitbreaker, 16 Ampere 1 Pole, 10 Ka, 240 V , Miniature Circuitbreaker, 32 Ampere Dp, 10 Ka, 240 V, Type C , Miniature Circuit Breaker,63 Ampere, Tp, 10 Ka, 415 V, Type C , Miniature Circuit Breaker, 63Ampere, Tpn, 10 Ka, 415 V, Type C , Pvc Insulated Single Core Copper Wire, 0.75 Sqmm , Frlsh , Pvc Insulated Single Core Copper Wire, 1.50 Sqmm , Frlsh , Pvc Insulated Single Core Copper Wire, 2.50 Sqmm , Frlsh , Pvc Insulated Two Core Copper Cable, 4.0 Sqmm , Frlsh , Pvc Insulated Single Core Copper Wire, 6.0 Sqmm , Frlsh , 16Sqmm Xlpe 4 Core Aluminium Un-Armoured Cable, Isi Marked , 25 Sq.Mm Xlpe Cable 4 Cores Al Un-Armoured Cable , Invertor Led Lamp 12 W - Invertor Led Lamp 12 W, Lumens/Watt Or Lumens1200 Li-Ion Battery Backup 4Hrs , Epr Ht Tape, 11Kv - Ethylene Propylenerubber (Epr) Ht Tape, 11Kv , Crc Contact Cleaner - Crc Contact Cleaner , 400 Ml , Pvc Insulation 10M Roll - Pvc Insulation 10M Tape Roll Total Quantity : 12140
Contract Date: Ref. Documents Contract Value : ₹ 7.67 Lakh
Government Departments No of Bidders 7
Jammu And Kashmir View Result →
37.
Housing Urban and Rular Development #10949448 AOC
Bids Are Invited For Prestressed Concrete Poles For Overhead Power Traction And Telecommunication Lines As Per Is 1678 (Q3) Total Quantity : 25
Contract Date: Ref. Documents Contract Value : ₹ 8.04 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
38.
Metro Rail #10934849 AOC
Tender for Design, Manufacture, Supply, Installation, Testing And Commissioning Of Telecommunication System For Phase-Ii Of Kochi Metro Rail Project
Contract Date: May 29, 2026 Contract Value : ₹ 91.64 Crore
Government Departments No of Bidders 2
Kerala View Result →
39.
Science and Technology #10895790 AOC
Bids Are Invited For 20 Pair, 0.5Sqmm 24 Awg Cu, Armoured Jelly Filled Armoured Telephone Cable , Field Telephone Cable (Telecommunication Cable) Total Quantity : 225
Contract Date: Ref. Documents Contract Value : ₹ 48,587
Government Departments No of Bidders 4
Ladakh View Result →
40.
Defence #10888263 AOC
Bids Are Invited For 734586 , Field Telephone Cable (Telecommunication Cable) Total Quantity : 15
Contract Date: Ref. Documents Contract Value : ₹ 20.07 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 1
Telangana View Result →
41.
Power #10880396 AOC
Bids Are Invited For Prestressed Concrete Poles For Overhead Power Traction And Telecommunication Lines As Per Is 1678 Total Quantity : 12269
Contract Date: Ref. Documents Contract Value : ₹ 6.39 Crore
Boards / Undertakings / PSU No of Bidders 8
Tamil Nadu View Result →
42.
Power #10880234 AOC
Bids Are Invited For Prestressed Concrete Poles For Overhead Power Traction And Telecommunication Lines As Per Is 1678 Total Quantity : 72900
Contract Date: Ref. Documents Contract Value : ₹ 32.49 Crore
Boards / Undertakings / PSU No of Bidders 8
Tamil Nadu View Result →
43.
Steel #10877194 AOC
Bids Are Invited For Multi-Core Trailing Duty Screened Cable , Field Telephone Cable (Telecommunication Cable) Total Quantity : 1500
Contract Date: Ref. Documents Contract Value : ₹ 21.38 Lakh
Boards / Undertakings / PSU No of Bidders 2
West Bengal View Result →
44.
Power #10865807 AOC
Bids Are Invited For Prestressed Concrete Poles For Overhead Power Traction And Telecommunication Lines As Per Is 1678 (Q3) Total Quantity : 72800
Contract Date: Ref. Documents Contract Value : ₹ 31.77 Crore
Boards / Undertakings / PSU No of Bidders 9
Tamil Nadu View Result →
45.
Power #10865805 AOC
Bids Are Invited For Prestressed Concrete Poles For Overhead Power Traction And Telecommunication Lines As Per Is 1678 (Q3) Total Quantity : 72700
Contract Date: Ref. Documents Contract Value : ₹ 32.58 Crore
Boards / Undertakings / PSU No of Bidders 10
Tamil Nadu View Result →
46.
Heavy Industries and Public Enterprises #10855135 Technical Bid
Tender For Supply, Installation, Wiring Testing And Commissioning Of Signalling And Telecommunication Work At Kdh Railway Siding Of Ccl
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Jharkhand View Result →
Telangana View Result →
48.
Railways #10828401 Price Bid
Supply , Installation , Testing And Commissioning Of Signalling And Telecommunication System For Coal Transportation At Wagon Tippler At Ntpc , Sipat Chhattisgarh As Per Tender Document
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Chhattisgarh View Result →
49.
Housing Urban and Rular Development #10796259 AOC
Supply, Installation And Maintenance Of Mechanical Compactors, Storage Systems, Furniture Articles, Solid Teak Wood Benches For Public Seating In New Judicial Complex Tower Of Justice At Gurugram-Overall Size Of Personal Locker Unit Shall Be Of Dimensions 900Mm(W) X 400Mm(D) X 1850Mm(H) Having 15 Locker Unit. Locking Shall Have Pad Lock . Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Powder Coating Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. , Providing And Placing Workstation Table In Completely Knock Down Conditions With An Overall Size 1320Mm X 660Mm X 1200Mm That Is To Be Assembled At Site. The Work Top Shall Have The Size 1200Mm X 600Mm Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Of The Top Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 525Mm X 350Mm. The Trey Shall Be Operated On Keyboard Channel. The Workstation Shall Have Panel Based Partition Of 60 Mm Thick With Overall Height 1200Mm. The Partition Shall Be Linear In Profile And Provided In The Front Side Of User As Well As On The Both Sides Of The User. The Top Trim, Top Bar, Mid Bar, Vertical Bar, Raceway, Skirting Shall Be Made Up Of Aluminium Extrusions (Pre-Treated) And Duly Powder Coated With Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. The Trims Shall Have The Size 60Mm X 19Mm With 1.5Mm Thick Covered With Die Cast End Caps On Joints 2 Ways, 3 Ways And 4 Ways (L-Cover For Corner, T-Cover For Middle Section Wherever Required). The Aluminium Raceway Shall Be Situated Below The Worktop With An Overall Size 116Mm(H) X 60Mm(D) With 1.4 Mm Cover Thickness And 2Mm Back Thickness As Per Requirement Of Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Trims. There Shall Be Soft-Board (With Fabric) And Marker Board Provided At Front Of The User. Laminated Top Tile And Bottom Tile Shall Be Situated At Both Sides Of The User And Below The Work Top Respectively. The Partition Shall Have Concealed Wire Management Capabilities And Should Be Engaged For Responsive And Safe Operations Of Power, Telecommunications And Data (Lan) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots/Cut-Outs Should Be Given On Raceways To Fix All Electrical And Data Points. Zinc Coated Small Top Support Brackets Shall Be Fixed On The Partition For Table Top Support. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Situated At Bottom. Adjustable Leveller Shoe Shall Be Provided At Bottom Of The Partition To Avoid Scratches On The Floor. Fixed Type Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 725Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close And Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. A Nylon Castor Based Cpu Unit Shall Be Provided With An Overall Size 468Mm X 284Mm With 18Mm Thick Pre-Laminated Particle Board. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. N , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (5 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (4 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (1 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 2400Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 2400Mm X 910Mm X 2190Mm (5 Nos.) 2 Bay Single Last Movable (Lockable) 2400Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 915 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 915Mm X 910Mm X 2190Mm (2 Nos) 1 Bay Single Last Movable (Lockable) 915Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 915 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 915 Mm X 910Mm X 2190Mm (1 Nos) 1 Bay Single Last Movable (Lockable) 915 Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 2400Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 2400Mm X 910Mm X 2190Mm (4 Nos.) 2 Bay Single Last Movable (Lockable) 2400Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (2 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 1830Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 1830Mm X 910Mm X 2190Mm (4 Nos.) 2 Bay Single Last Movable (Lockable) 1830Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 2400Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 2400Mm X 910Mm X 2190Mm (4 Nos.) 2 Bay Single Last Movable (Lockable) 2400Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (3 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 1830Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 1830Mm X 910Mm X 2190Mm (3 Nos.) 2 Bay Single Last Movable (Lockable) 1830Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 4 Bay Single Static Fixed 4800Mm X 455Mm X 2190Mm (1 No.) 4 Bay Double Movable 4800Mm X 910Mm X 2190Mm (4 No.) 4 Bay Single Last Movable (Lockable) 4800Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 4 Bay Single Static Fixed 4800Mm X 455Mm X 2190Mm (1 No.) 4 Bay Double Movable 4800Mm X 910Mm X 2190Mm (5 No.) 4 Bay Single Last Movable (Lockable) 4800Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated.Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 915Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 915Mm X 910Mm X 2190Mm (3 Nos) 1 Bay Single Last Movable (Lockable) 915Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm . The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 3 Bay Single Static Fixed 3600Mm X 455Mm X 2190Mm (1 No.) 3 Bay Double Movable 3600Mm X 910Mm X 2190Mm (4 Nos.) 3 Bay Single Last Movable (Lockable) 3600Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm . The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 3 Bay Single Static Fixed 2745Mm X 455Mm X 2190Mm (1 No.) 3 Bay Double Movable 2745Mm X 910Mm X 2190Mm (2 Nos.) 3 Bay Single Last Movable (Lockable) 2745Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm . The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 3 Bay Single Static Fixed 2745Mm X 455Mm X 2190Mm (1 No.) 3 Bay Double Movable 2745Mm X 910Mm X 2190Mm (3 Nos.) 3 Bay Single Last Movable (Lockable) 2745Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm . The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 3 Bay Single Static Fixed 3600Mm X 455Mm X 2190Mm (1 No.) 3 Bay Double Movable 3600Mm X 910Mm X 2190Mm (5 Nos.) 3 Bay Single Last Movable (Lockable) 3600Mm X 455Mm X 2190Mm (1 No.) , Providing And Supplying 2 Seater Visitor Chair With 3 Arms. The Seat And Back Shall Be Made Up Of Reinforced Pu With Ms Perforated Sheet (Sheet Thickness - 2.5Mm).Seat Weight With Pu 6Kg±0.01 And Back Shall Be 6.11Kg±0.01. The Seat Mounted On Ms Powder Coated Square Cross Beam Having Cross-Section Area 60Mm X 60Mm With 2Mm Thick (Weight = 3.82Kg±0.01) Fitted With Polypropylene End Caps On Both Side. The Arm (Weight = 1.28±0.01) And Leg (Weight = 1.91±0.01) Shall Be Made Up Of Pressure Diecast Aluminium. There Shall Be Leveller Shoe Provided At The Bottom With Metal Insert. The Individual Seat Size Shall Be 515±10 Mm(W) X 505±10 Mm(D), Back Size Shall Be 515±10 Mm(W) X 510Mm±10 Mm(H) From Seat, Overall Depth Shall Be 660±10 Mm, Overall Height Shall Be 870±10 Mm And Overall Width Shall Be 1100 ±10 Mm. Total Weight = 36.8 Kg±0.01. (Seat Weight Without Pu 4.6Kg±0.01 And Back Shall Be 5.0Kg±0.01.). Colour Of Pu Shall Be Tan Brown And Powder Coating Shall Be Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Providing And Supplying 3 Seater Visitor Chair With 4 Arms. The Seat And Back Shall Be Made Up Of Reinforced Pu With Ms Perforated Sheet (Sheet Thickness - 2.5Mm).Seat Weight With Pu 6Kg±0.01 And Back Shall Be 6.11Kg±0.01. The Seat Mounted On Ms Powder Coated Square Cross Beam Having Cross-Section Area 60Mm X 60Mm With 2Mm Thick (Weight = 5.65Kg±0.01) Fitted With Polypropylene End Caps On Both Side. The Arm (Weight = 1.28±0.01) And Leg (Weight = 1.91±0.01) Shall Be Made Up Of Pressure Diecast Aluminium. There Shall Be Leveller Shoe Provided At The Bottom With Metal Insert. The Individual Seat Size Shall Be 515±10 Mm(W) X 505±10 Mm(D), Back Size Shall Be 515±10 Mm(W) X 510Mm±10 Mm(H) From Seat, Overall Depth Shall Be 660±10 Mm, Overall Height Shall Be 870±10 Mm And Overall Width Shall Be 1625 ±10 Mm. Total Weight = 55Kg±0.01. (Seat Weight Without Pu 4.6Kg±0.01 And Back Shall Be 5.0Kg±0.01.). Colour Of Pu Shall Be Tan Brown And Powder Coating Shall Be Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Providing And Supplying 4 Seater Visitor Chair With 5 Arms. The Seat And Back Shall Be Made Up Of Reinforced Pu With Ms Perforated Sheet (Sheet Thickness - 2.5Mm).Seat Weight With Pu 6Kg±0.01 And Back Shall Be 6.11Kg±0.01. The Seat Mounted On Ms Powder Coated Square Cross Beam Having Cross-Section Area 60Mm X 60Mm With 2Mm Thick (Weight = 7.56Kg±0.01) Fitted With Polypropylene End Caps On Both Side. The Arm (Weight = 1.28±0.01) And Leg (Weight = 1.91±0.01) Shall Be Made Up Of Pressure Diecast Aluminium. There Shall Be Leveller Shoe Provided At The Bottom With Metal Insert. The Individual Seat Size Shall Be 515±10 Mm(W) X 505±10 Mm(D), Back Size Shall Be 515±10 Mm(W) X 510Mm±10 Mm(H) From Seat, Overall Depth Shall Be 660±10 Mm, Overall Height Shall Be 870±10 Mm And Overall Width Shall Be 2175 ±10 Mm. Total Weight = 73.2Kg±0.01. (Seat Weight Without Pu 4.6Kg±0.01 And Back Shall Be 5.0Kg±0.01. Colour Of Pu Shall Be Tan Brown And Powder Coating Shall Be Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50 Plus 25 Plus 30)Mm Thick Having Density (40, 32 And 32)Kg/M³ In Seat And (30 Plus 25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Metal Insert Crca Covered With Natural Wood Having Pitch Circle Dia. 630 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 To Be Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 710±10 Mm(H) From Seat. Overall Height Shall Be = 1170±10 Mm And Overall Width/Depth = 740±10 Mm. , Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam (50 Plus 25)Mm Thick Having Density 40Kg/M³ And The Back Shall Be Made Of (15 Plus 6)Mm Thick Double Layered Moulded Plywood Padded With High Resilience Polyurethane Foam 40Mm Thick Having Density 32Kg/M³. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Aluminum With Cushion Arm Having Leatherite Top Completely Joint With Seat. For Seating Durability The Chair Shall Have Synchro Knee Tilt 360 Degree Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 540±10 Mm(W) X 750±10 Mm(H) From Seat. Overall Height Shall Be = 1210±10 Mm, Overall Depth = 630±10 Mm And Overall Width = 650±10 Mm. N , Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam (50 Plus 25)Mm Thick Having Density 40Kg/M³ And The Back Shall Be Made Of (15 Plus 6)Mm Thick Double Layered Moulded Plywood Padded With High Resilience Polyurethane Foam 40Mm Thick Having Density 32Kg/M³. The Seat And Back Shall Be Upholstered With Pure Leather Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Aluminum With Cushion Arm Having Leatherite Top Completely Joint With Seat. For Seating Durability The Chair Shall Have Synchro Knee Tilt 360 Degree Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 540±10 Mm(W) X 750±10 Mm(H) From Seat. Overall Height Shall Be = 1210±10 Mm, Overall Depth = 630±10 Mm And Overall Width = 650±10 Mm. , Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50 Plus 25 Plus 30)Mm Thick Having Density (40, 32 And 32)Kg/M³ In Seat And (30 Plus 25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Metal Insert Crca Covered With Natural Wood Having Pitch Circle Dia. 630 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 And Should Be Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 560±10 Mm(H) From Seat. Overall Height Shall Be = 1010±10 Mm, Overall Depth = 680±10 Mm And Overall Width/Depth = 740±10 Mm. , Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood And The Back Shall Be Supplied With Metal Pipe, Inserted Between Backrest. The Chair Shall Be Padded With High Resilience Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ In Seat And 12Mm Thick Having Density 23Kg/M³ In Back. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.8±0.1 Mm Thick And 535 Gsm And Breathable Mesh Tapestry Behind The Backrest.. Ms Chrome Plated Pipe Frame Shall Be Provided On Both Side Of Seat And Back With Size 25Mm X 10Mm. The Backrest Shall Be Supplied By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support. The Armrest Shall Be Used Black Integral Polyurethane Arm Mounted On Crca Chrome Plated Pipe Having Size 40Mm X 10Mm Completely Joint With Seat And Back With The Assistance Of Allen Key Screw. A Chrome Plated Round Bend Pipe Of Dia. 9Mm Shall Be Provided Behind The Backrest Of The Chair And Welded With Main Frame. For Seating Durability The Chair Shall Have Knee Tilt 360 Degree Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 100Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Shall Have Five Legged Crca Chrome Plated Having Pitch Circle Dia. 640Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chairs Should Be Injection Moulded In Black 30% Glass Filled, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 490±10 Mm(W) X 520±10 Mm(D) And Back Size Shall Be 450±10 Mm(W) X 535±10 Mm(H) From Seat And Overall Height = 980±10 Mm, Overall Width/Depth = 740±10 Mm. , Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam (50 Plus 25)Mm Thick Having Density 40Kg/M³ And The Back Shall Be Made Of (15 Plus 6)Mm Thick Double Layered Moulded Plywood Padded With High Resilience Polyurethane Foam 40Mm Thick Having Density 32Kg/M³. The Seat And Back Shall Be Upholstered With Pure Leather Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support. The Chair Shall Be Supplied With Chrome Plated With Cushion Arm Having Leatherite Covering Top Completely Joint With Seat. For Seating Durability The Chair Shall Have Synchro Knee Tilt 360 Degree Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 580±10 Mm(H) From Seat. Overall Height Shall Be = 1040±10 Mm, Overall Depth = 620±10 Mm And Overall Width = 620±10 Mm. , Providing And Supplying A Visitor Chair With Ergonomic Design For User Comfort And Shall Have Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood And The Back Shall Be Supplied With Metal Pipe, Inserted Between Backrest. The Chair Shall Be Padded With High Resilience Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ In Seat And 12Mm Thick Having Density 23Kg/M³ In Back. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.8±0.1Mm Thick, 535 Gsm And Breathable Mesh Tapestry Behind The Backrest. Ms Chrome Plated Pipe Frame Shall Be Provided On Both Side Of Seat And Back With Size 25Mm X 10Mm. The Backrest Shall Be Supplied By Keeping The Natural Curvature Of The Spine Which Helps To Provide Back Support. The Armrest Shall Be Used Black Integral Polyurethane Arm Mounted On Crca Chrome Plated Pipe Having Size 40Mm X 10Mm Completely Joint With Seat And Back With The Assistance Of Allen Key Screw. Chrome Plated Round Bend Pipe Of Dia. 9Mm Shall Be Provided Behind The Backrest Of The Chair And Welded With Main Frame. The Frame Structure Shall Be Cantilever Support Type Made Of Ms Crca Chrome Plated Round Pipe Of Dia. 25.4Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 500±10 Mm(W) X 510±10 Mm(D) And Back Size Shall Be 450±10 Mm(W) X 540±10 Mm(H) From Seat And Overall Height = 980±10 Mm, Overall Width = 560±10 Mm. N , Providing And Supplying A Visitor Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50 Plus 25 Plus 30)Mm Thick Having Density (40, 32 And 32)Kg/M³ In Seat And (30 Plus 25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. The Frame Structure Shall Be Cantilever Support Type Made Of Ms Crca Chrome Plated Round Pipe Of Dia. 28.5Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 560±10 Mm(H) From Seat. Overall Height Shall Be = 1010±10 Mm, , Providing And Supplying Centre Table With An Overall Size 1200Mm X 1200Mm X 410Mm. The Top Should Be Made Up Of 75Mm Thick, It Would Be 25Mm At Mid And 75Mm At Sides. The Mdf Top Should Have Decorative Finish With Veneer And Pu Polish And Shade As Per Directions Of Engineer-In-Charge. The Understructure Shall Consist Of 4 Nos. Of Ms Sheet Gold Leg With 6Mm Thick. , Providing And Supplying Centre Table With An Overall Size 600Mm X 600Mm X 410Mm. The Top Should Be Made Up Of 75Mm Thick, It Would Be 25Mm At Mid And 75Mm At Sides. The Mdf Top Should Have Decorative Finish With Veneer And Pu Polish And Shade As Per Directions Of Engineer-In-Charge. . The Understructure Shall Consist Of 4 Nos. Of Ms Sheet Gold Leg With 6Mm Thick. , Providing And Supplying Kids Chair. The Complete Structure Shall Be Made Up Of One Piece Injection Moulded Polypropylene Shell. The Understructure Shall Consist Of Four Legs.There Is A Square Hole On The Backrest Of Size L 140 Mm X H 50 Mm For Air Flow.The Chair Is A Single Piece Unit Made From Virgin Grade Material. The Seat Size Shall Be 280±10 Mm(W) X 300±10 Mm(D) And Back Size Shall Be 310±10 Mm(W) X 330±10 Mm(H) From Seat And Overall Height = 610±10 Mm, Overall Depth = 420±10 Mm, Overall Width = 370±10 Mm.Seat Height = 330±10 Mm The Leg Dimension Is 47 Mm X 37 Mm, L Shaped. , Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support With The Assistance Of Cushion. The Armrest Shall Be Of Chrome Plated Frame Padded With Cushion With Leatherite Covering On Top. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms/Crca Chrome Plated Pipe Having Cross Section 40Mm X 20Mm. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor As Well As Uneven Surfacing. The Seat Size Shall Be 500±10 Mm(W) X 500±10 Mm(D) And Back Size Shall Be 490±10 Mm(W) X 550±10 Mm(H) From Seat And Overall Height = 960±10 Mm, Overall Width = 600±10 Mm And Overall Depth = 670±10 Mm. N , Providing, Placing And Installing A Slotted Angle Rack With An Overall Size 900Mm (W) X 600Mm (D) X 1800Mm (H). The Panel Shall Have 5 Nos. Of Shelves Made Up Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Crca Slotted Angle Shall Be Supplied With 2Mm Thick Having Size 40Mm X 40Mm. All Steel Components Shall Be Have Finishing With Powder Coating Of Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. Corner Plate (Gussets) And Fasteners Shall Be Provided For Complete Assembly. , Providing, Supplying And Placing In Position An Indoor Chair Complete In All Respects Manufactured Using 20% Glass-Filled Injection Moulded Polypropylene, Ensuring High Strength, Durability, And Resistance To Wear And Tear. The Chair Shall Be Of Single-Piece Moulded Construction With A Smooth Finish And Free From Any Sharp Edges Or Defects. The Frame Structure Shall Be Supported By Four Sturdy Polypropylene Legs Of Tapered Design, Having A Diameter Of 35 Mm At The Upper End And 25 Mm At The Lower End, Providing Adequate Stability And Load-Bearing Capacity. The Seat Size Shall Be 420 ± 10 Mm (Depth) × 460 ± 10 Mm (Width), And The Back Size Shall Be 395 ± 10 Mm (Width) × 360 ± 10 Mm (Height From Seat Level), Ergonomically Designed For Comfortable Seating Posture. The Overall Height Of The Chair Shall Be 790 ± 10 Mm And Overall Depth Shall Be 515 ± 10 Mm. The Chair Shall Have A Uniform Finish, Be Uv Stabilized, And Suitable For Long-Term Use. Colour Shall Be As Approved By The Department/Engineer-In-Charge. The Rate Shall Include Supplying, Transporting, And Placing The Chair At Site In Complete Condition. Sample Shall Be Submitted For Prior Approval Before Bulk Supply. , Providing, Supplying And Placing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 915Mm (W) X 485Mm (D) X 1980Mm (H) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. All Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf And Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Powder Coating Of Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Supplying And Placing A Modular Table With An Overall Size 1350Mm X 900Mm X 750Mm. The Top Of The Table Shall Be Made Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Of The Top Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Ms Crca Powder Coated Rectangle Pipe Frame Having Cross-Section Area 50Mm X 25Mm With 1.2Mm Thick. The Table Understructure Shall Be Supplied With Ms Powder Coated Round Leg Pipe 63 X 1.2Mm. The Gable End Shall Be Given At One Side Made Up Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Fixed Pedestal Unit Shall Be Supplied With 1 Nos. Of Drawer Plus 1 Filing At One Side. Facia Of Drawer And Filling In 18Mm Plpb Board The Drawer Shall Be Synchronized Locked With Central Locking Mechanism By One Single Key. The Drawer Shall Be Operated With Aluminium Recessed Handle. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. Finishing With Powder Coating Of Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Supplying And Placing Cafeteria Table With An Overall Size 1400Mm X 900Mm X 720Mm. The Top Of The Table Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminated. The Top Profile Shall Be In Rectangle Shape With Round Corner And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Ms Powder Coated Pipe Frame Having Size 40Mm X 20Mm With 1.6Mm Thick. The Legs Shall Have The Combination Of Ms Powder Coated And Chrome Plated. The Joints Shall Be Made By Using Tig Welding. There Shall Be Adjustable Leveler Provided With Metal Insert At Bottom To Avoid Scratches On The Floor. , Supplying And Placing Center Table With An Overall Size 1200Mm X 1200Mm X 450Mm. The Top Shall Be Made Up Of 12Mm Thick Toughened Glass. The Top Profile Shall Be In Rectangle Shape With Bevelled Edges. The Top Shall Be Supported On Vacuum Caps Situated Over Ss 202 Grade Pipe Frame. A Hanging Storage Shelf Shall Be Provided Below The Top Of Ss With An Overall Size 820Mm X 390Mm With The Assistance Of 31 Nos. Small Round Strips Having 5Mm Dia.The Under Structure Shall Have Ss 202 Grade Pipe Frame Having Size 30Mm X 10Mm. 2 Nos. Foot Step Shall Be Provided Between The Pipe Frame With Size 30Mm X 10Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. N , Supplying And Placing Center Table With An Overall Size 1200Mm X 600Mm X 450Mm. The Top Shall Be Made Up Of 12Mm Thick Toughened Glass. The Top Profile Shall Be In Rectangle Shape With Bevelled Edges. The Top Shall Be Supported On Vacuum Caps Situated Over Ss 202 Grade Pipe Frame. A Hanging Storage Shelf Shall Be Provided Below The Top Of Ss With An Overall Size 820Mm X 390Mm With The Assistance Of 31 Nos. Small Round Strips Having 5Mm Dia. The Under Structure Shall Have Ss 202 Grade Pipe Frame Having Size 30Mm X 10Mm. 2 Nos. Foot Step Shall Be Provided Between The Pipe Frame With Size 30Mm X 10Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. N , Supplying And Placing Center Table With An Overall Size 600Mm X 600Mm X 450Mm. The Top Of The Table Shall Be Made Up Of 12Mm Thick Toughened Glass. The Top Profile Shall Be In Square Shape And The Edges Shall Be In Chamfer Shape. The Top Shall Be Supported On Vacuum Caps Situated Over Ss 202 Grade Pipe Frame. A Hanging Storage Shelf Shall Be Provided Below The Top Of Ss With An Overall Size 270Mm X 390Mm With The Assistance Of 9 Nos. Small Round Strips Having 5Mm Dia. And 370Mm Length. The Under Structure Shall Have Ss With Shiny Chrome Finish Pipe Frame Having Size 30Mm X 10Mm. 2 Nos. Foot Step Shall Be Provided Between The Pipe Frame With Size 30Mm X 10Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. , Supplying And Placing Conference Table In Completely Knock Down Conditions With An Overall Size 1500Mm X 750Mm X 750Mm That Is To Be Assembled At Site. The Work Top Shall Have The Size 1500Mm X 750Mm Made Up Of 45Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Laminate And Finish As Per Shade Approved By Engineer-In-Charge. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Extruded Aluminium Profile Shall Be Attached On The Both Side Front And Back Side Of The Gable Ends And Bottom Side Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board Of Height 600Mm In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. , Supplying And Placing Conference Table In Completely Knock Down Conditions With An Overall Size 2100Mm X 900Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Table Top Shall Have The Size 2100Mm X 900Mm Made Up Of 50Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With One Side Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edgebander Machine At 200 0C. The Table Top Shall Be Supported By Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Have The Size 1050Mm X 695Mm With 49Mm Thick And 100Mm X 695Mm With 18Mm Thick. The Gable End Shall Be Made Up Of Pre-Laminated Particle Board With Appropriate Pvc Edge Banding And Covered Both Side By Aluminium Section. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Desk. The Modesty Panel Shall Have An Overall Size 1400Mm X 400Mm With 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Supplying And Placing Conference Table In Completely Knock Down Conditions With An Overall Size 7200Mm X 1200Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Table Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape With Round Front And Back And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End.It Should Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Full Round Post Form And Other Edges Sealed With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be In Between.The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Supplying And Placing Conference Table In Completely Knock Down Conditions With An Overall Size Dia. 1200Mm X 750Mm That Is To Be Assembled At Site. The Table Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Circular Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Shall Be Supported On Ms Powder Coated Round Pipe Having 50Mm Dia With 1.6Mm Thickness And Over Particle Board Gable End Of 18Mm Thickness. The Table Understructure Shall Have 4 Nos. Of Legs. The Table Is Provided With 8Mm Thick Bottom Plate And 5 Mm Thick Top Plate. There Shall Be Gliders Provided At The Base To Avoid Scratches On The Floor. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. N , Supplying And Placing Conference Table In Completely Knock Down Conditions With Per Seat Size 675Mm X 600Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be With Minifix Dowels, Pins And Ms Brackets. The Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In C Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And The Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. The Modesty Panel Shall Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380 , Supplying And Placing Corner Table With An Overall Size 1200Mm X 600Mm X 450Mm. The Top Of The Table Shall Be Made Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Understructure Shall Consist Of Ss 202 Grade Pipe Frame With Shiny Chrome Finish With An Overall Size The Size 40Mm X 20Mm With 1.6Mm Thick. One Nos. Footstep Shall Be Provided Between The Frame With Same Size I.E. 40Mm X 20Mm. There Shall Be Ppcp Shoe Provided At The Bottom To Avoid Scratches On The Floor. , Supplying And Placing Modular Table In Completely Knock Down Conditions With An Overall Size 1800Mm X 1650Mm X 750Mm That Is To Be Assembled At Site. The Work Top Shall Have The Size 1800Mm X 750Mm Made Up Of 50Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Laminate I.E. Merino Luvih Antique Walnut 37380. The Top Shall Be 50Mm Thick On Edges, After 100Mm From Edges It Should Be 25Mm Thick. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. Extruded Aluminium Profile Shall Be Inserted In The Side Edges Of The Table On Both Side. The Table Top Shall Be Supported On Ms Powder Coated Pipe Frame Having Cross-Section Area 50Mm X 25Mm With 1.6Mm Thick. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 50Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. The Table Shall Have Side Unit For Storage Purpose With An Overall Size 900Mm X 450Mm X 750Mm. The Storage Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Laminate I.E. Merino Luvih Antique Walnut 37380. The Top Shall Be 25Mm Thick And All Other Profile I.E. Side, Back, Shutter, Shelf, Skirting Shall Be 18Mm Thick. The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have 1 Nos. Of Adjustable Shelf And 2 Nos. Of Door Shutters Shall Be Provided For Opening And Closing The Storage. The Shutter Shall Be Operated With Concealed Crank Hinge With Al Die Cast Handle As Well As Mp Lock Mechanism. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close And Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board And ±0.2Mm For Metal. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. N , Supplying And Placing Nursery Classroom Table With An Overall Size 1400Mm X 300Mm X 550Mm. The Top Of The Table Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminated. The Top Profile Shall Be In Curve Shape With Round Corner And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Legs Shall Have The Combination Of Ms Powder Coated And Chrome Plated With 40Mm Dia. The Joints Shall Be Made By Using Tig Welding. There Shall Be Adjustable Leveler Provided With Metal Insert At Bottom To Avoid Scratches On The Floor. , Supplying And Placing Office Table In Completely Knock Down Conditions With An Overall Size 3000Mm X 1200Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Be Made Up Of Medium Density Fibre-Board With Veneer Laminate Of Shade As Per Engineer-In-Charge. The Top Panel Shall Be In Rectangle Shape With 79Mm Thick (75Mm Mdf Plus 4Mm Natural Veneer And Pu). Veneered Portion Of Work Surface Shall Be Finish With Pu Polish. The Edges Of The Table Shall Be Supplied With Solid Brass Bar Strips Having Cross-Section Area 25Mm X 5Mm All Around Worktop. The Top Panel Shall Be Supported On Ms/Crca Rectangle Pipe Frame Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Table Top Shall Be Enclosed With Flapper Box On Both Sides For Electric Provision Duly Polished. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be 63Mm Thick Made Up Of (59Mm Mdf Plus 4Mm Natural Veneer And Pu). The Table Shall Be Clad With 29Mm Thick (25Mm Mdf Plus 4Mm Natural Veneer And Pu) Modesty Panel Which Provide Structural Support For The Table. The Profile Of The Gable End And Modesty Panel Shall Be In Linear Shape With Appropriate Veneer Surface. There Shall Be Leveler Provided With Metal Insert At The Base To Avoid Scratches On The Floor As Well As Uneven Surfacing. The Table Shall Be Supplied With Both Side Pedestal Unit With An Overall Size 600Mm X 920Mm X 590Mm. Top, Side, Back, Facia Shall Be Made Up Of 18Mm Thick Mdf Board With Approved Veneer Laminate. It Shall Have 3 Nos. Of Drawer Operated With The Assistance Of Soft Closed Ball Bearing Channel And Grooves Handle For Easy Griping. The Complete Structure Shall Be Supplied With Approved Veneer Laminate And Pu Polish Accordingly. The Table And Pedestal Have To Be Made In Such A Way That No Gap Should Be Seen In Between. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board And ±0.2Mm For Metal. , Supplying And Placing Single Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm And Color As Per Direction Of Engineer In Charge. The Understructure Shall Consist Of Pipe Frame Loop Leg Of Ss Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 540±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 915±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm.N , Supplying And Placing Storage Unit With An Overall Size 600Mm X 450Mm X 1800Mm. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. All Profile I.E. Side, Back, Top, Shutter, Shelf, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have Four Nos. Of Adjustable Shelf. Door Shutters Shall Be Provided For Ease Of Opening With The Assistance Of Soft Closed Concealed Crank Hinge And Leather Handle. The Front Section Of The Shutter Shall Be Supplied Ss 202 Grade Pipe Frame (Loop) Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Understructure Shall Consist Of Ss 202 Grade Leg Having Cross-Section Area 80Mm X 20Mm With 1.6Mm Thick. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. The Boards Used Should Meet International Standards Of Quality And Safety, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Elasticity Bending Tested As Per Is 2380. , Supplying And Placing Storage Unit With An Overall Size 900Mm X 450Mm X 900Mm. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Laminate I.E. Merino Luvih Antique Walnut 37380 And Finish As Per Approved Shade. All Profile I.E. Side, Back, Top, Shutter, Shelf, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have Two Nos. Of Adjustable Shelf. Door Shutters Shall Be Provided For Ease Of Opening With The Assistance Of Soft Closed Concealed Crank Hinge And Leather Handle. The Fornt Section Of The Shutter Shall Be Supplied Ss 202 Grade Pipe Frame (Loop) Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Understructure Shall Consist Of Ss 202 Grade Leg Having Cross-Section Area 80Mm X 20Mm With 1.6Mm Thick. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. The Boards Used Should Meet International Standards Of Quality And Safety, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Elasticity Bending Tested As Per Is 2380. , Supplying And Placing Three Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Consist Of Pipe Frame Loop Leg Of Ss Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1540±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1900±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm. N , Supplying And Placing Three Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Structure Shall Be Upholstered With Pure Leather Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Consist Of Pipe Frame Loop Leg Of Ss Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1540±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1900±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm. , Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Complete Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm And Color As Per Direction Of Engineer In Charge. The Understructure Shall Consist Of Ss 202 Grade Loop Leg With Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1040±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1360±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm. N , Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Complete Structure Shall Be Upholstered With Pure Leather Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Consist Of Ss 202 Grade Loop Leg With Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1040±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1360±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm. , Wooden Bench 2.191 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.2 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respect , Wooden Bench 2.242 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.282 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.494 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.57 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.703 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.022 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.024 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.025 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.1 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.182 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.192 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.34 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.386 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.5 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.559 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.58 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.621 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.7 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.895 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.922 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.929 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects.
Contract Date: May 11, 2026 Contract Value : ₹ 17.47 Crore
Government Departments No of Bidders 5
Haryana View Result →
50.
Defence #10783770 Price Bid
Provn Of Specialist Shops (Telecommunications Sec) At 611 Eme Bn At Ahmedabad Cantt
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
Gujarat View Result →
TenderDetail
Loading tenders