View Bid Results For Technical Writing Service Tenders

We found 164 Bid Results related to technical writing service tenders. You can find Contractor details who won technical writing service tenders along with contract details in Bid awards announcements section.

Indian Tenders
2
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
2
Live Opportunities Worldwide
Filters
Stage
132
22
10
Tender Publishing Platform
26
138
State / UT
24
25
23
19
18
10
8
7
6
6
5
4
4
4
4
4
3
3
2
2
2
2
1
1
1
Contract Value
36
18
74
34
Publish Date
0
0
0
0
0
Sector
17
35
31
17
16
14
11
10
9
5
4
3
3
2
1
1
1
1
Ownership
6
92
46
12
12
1
1
Within keyword
Active filters:
Showing 1–4 of 164 tenders matching your filters
1.
Housing Urban and Rular Development #11346479 Technical Bid
Tender for Construction Of Modular Ot Eye Under Old Sadar Hospital At Deoghar For The Year-2025-26. , Egp. Puff Panels For O.T Wall Walls &Ceiling , Supply, Installation, Testing And Commissioning Of Modular Ot Walland Corner Panels With Insulated Prefabricated Puff Panels. The Ot Wall Shall Be Constructed Using Egp Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The Panel Of The Theatre Shall Be Sufficient For , G.I. Puff Panels For Ot Ceiling , Modular Ot Ceiling Panels With Insulated Prefabricated Puff Panels. The Ot Ceiling Shall Be Constructed Using Gi Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The , Antibacterial / Antifungal Paint. , Providing And Establishing Anti-Bacterial & Anti Fungicidal Sterile Coating Of Liquid Plastic Paint On Gi Puff/Ss Panel Of Modular Ot. The Paint Should Be Seamless, Easy To Clean, Should Have Vapor Permeability Which Allows Substrate Moisture To Escape And Protects Against Growth Of Bacteria, Mound And Yeasts, Moisture Resistance, Freeze / Thaw Resistance. Anti- Bacterial Anti Microbial Quality Should Remain Active Throughout The Life Of The Product. Vapors Permeable Structure Should Allow Damp Substrates To Dry Out Without Causing Blistering. It Should Tolerate Cleaning With Hospital Chemical Agents. Filling Of All Joints And Cavities Should Be With Metallic Epoxy Filler And Sand Casted Flush To Provide A Joint-Less Finish. This Should Include All Fittings, Accessories, Hardware, Support Structures, Etc. Required For Installation. Anti-Bacterial And Anti-Fungus Sterile Coating Shall Be Applied On The Finished Walls & Ceiling With At Least 2-3 Coats To Achieve A Thickness Of Minimum 200 Micron. Before Application Of Sterile Wall Coating An Appropriate Primer Shall Be Applied. The Primer Shall Be Supplied Along With The Paint And Should Be Of The Same Make As That Of Paint. And Shall Be Applied Prior To Coating Of Anti-Bacterial & Anti- Fungus Sterile Paint On Walls & Ceiling 2-3 Coats Shall Be Applied To Achieve A Thickness Of 200 , Laminar Air Flow , The Range Of Ventilated Ceiling Should Provide The Sterility And Cleanliness Required For Ot Environ Ment. Perfect Tightness Should Be Guaranteed By A N Epoxy Seal Between Filters And Holding Structure Disabling €Œby Pass†Of Hepa Filters. Two Nos . Pressure Measurement Ports Shall Be Provided In Each Housingairflow: 50 +-10% Fpm Class 100/Iso C Lass 5 As Per International Standard & Meets Din 1 946-4. D.O.P. Tested Point To P Oint Scanned Minipleat Hepa Filters Having Followi Ng Technical Specifications To Be Fixed In Above H Ousings F Rame € Aluminium. Type € Flange Type. Media € Micro Fiber Glass . Se Aling Of Media € By Means Of Epoxy. I.P.D. - 15 Mm Wg. F.P.D. € 50 Mm Wg. Separators € Concealed Al. Or Hot Melt G Lue. Capacity € 500 Cfm Size Of Laf - 2400 X 2400 Mmthe Work Should Be Executed As Per The Direction Of Enginee R In Charge , Homogeneous Conductive Pvc Vinyl Flooring In O.T.,Icu,Opd. , Providing And Fixing 2 Mm Thick Homogeneous Conductive Pvc Jeoflor Electro + Sd Roll Acts As A Continous Conductive 10^6 Rt10^8. It Has Preminum Antistatic Properites, ( 100 V) The Product Has To Be Groundedwith An Esd Copper Strip( Cf. Finishes To Meet Its Full Performance The Product Is Non Reactive To Residual Indentation With A Value 0.02 Mm. The Flooring Is A Group Twear Rating Suitableheavey Duty Trafficareasand Bfi-S1 Fire Resisteance. The Product Is Non -Emissive Of Volatile Organic Compounds With 10Ug/M2 ( Tvoc After 28 Days Iso 1000-6.Total Thickness En428 2Mm, En 430 G/Sq.M 2900, Width 426 Cm/Lm 200/20, En (European Standard) En 685 Classs 34-43, Fire Rating En1081 0Hm 1^^6 Rt 10^8 Make Jeo Flor Esd Coundictive Flooring , Writing White Board. , Supply & Installation Of Writing Unit/White Boardof Size 900/600 Mm Having 1.60 Mm Thick White Laminate Board Top, Bonded To A 40 Mm High Density Fiber Board Sheet For Additional Rigidity. The Unit Should Open To Create A Wall Mounted Writing Surface Within The Operating Room. The Work Should Be Executed As Per The Direction Of Engineer-In-Charge. , Storage Unit . , Supply And Installation Of Storage Unit Of Ss 304Of Reputed Make And Having Size 1665 X 865 X350 Mm And Having Two Or More Glass Shelves Of Toughened Glass 10 Mm Thick, Supported With D Type Bracket (Ss 304 Grade) With 10 Mm Thickness And Rubber Gasket Of 2Mm And Mounted Flush On Wall. The Work Should Be Executed As Per The Directions Of Engineer-In-Charge. , Pressure Release Damper. , Supply, Installation, Testing & Commissioning Of Ss Fabricated Cascade Pressure Stabilizer Having Ss Blades To Control Operation Theatre Room - Air Pressure Of Approved Make As Per Tech. Specs Attached. , Peripheral Lights (Dimmable). , Supplying & Fixing Of Sturdy Writing Board Of Size: 840Mm X 640Mm With Perfect Marker Writing Surface In Front And Back Is Laminated To Make Water Proof Surface. The Board Has To Be Provided With Anodized Aluminium Framing And Its Back Should Have Hooks For Wall Hanging Of Approved Make And Type Directly On Wall , Ahu With Outdoor Unit Ac 11.5 Tr Including Insttalation , Double Skin Air Handling Unit :Supply, Installatio N, Testing And Commissioning Of Double Skin Constr Uction Air Handling Units. With Inner Sheet Ss 304 And Ouer Sheet Ppgi With 40 Mm Panel Thickness With Mixing Box With Fa,Ra,Sa Dampers, Fitted With 2 Stage Filteration Arrangment Completed With 10 Micron Filters 5 Mico Nfilter After Fan Section. Suitable For Outdoor In Stallation With 45 Mm Thick Panels With Inner Skin 0.6Mm Thick Aluminium Sheet, Thermal Breack And W Eather Proof.Motor Efficiency Factor - Ie-2Â- Mix Ing Box With Manually Operated Fresh & Return Air Al Dampers.Â- Filter Section With 50 Mm Thick Box Type Pre-Filter (Merv-8) & 305 Mm Thick Rigid Med Ia Type Fine Filter (Merv-10) Mounted On A Common Filter Frame & Viscous/ Wasable Synthetic Type Air Pre-Filterâ- Coil Section With 8 Row Deep Dx Coi L . Fin Material - Plain Aluminium Fin Spacing - 1 1-13 Fpi, Condensing Tray - 22G Ss304, Test Pressu Re - 38Kg/Sq.Cm. Insulation Material For Drain Tra Y-13Mm Thick Close Cell Nitrile Rubber.Â- Uv Lamp , Aluminum Ductiing 22 Gaze , Ducting : ( Al. Sheet Metal )Ducting:- Supply And Fixing Of Site Fabricatedal Sheet Metal Ducts In A Ccordance With Theapproved Shop Drawings And As Re Quired As Per Specifications.All Necessary Gi /Ms Supports Using Thread Rods (As Directed). Angle, F Lat, And Anchor Bolts, Food Grade Neoprene Gaskets , Food Grade Adhesive Included In The Scope. , Insulation , Underdeck Insulation :Supplying And Fixing Of Unde Rdeck Roof Insulation Of 13 Mm Thickness Of Mat Fi Nish Closed Cell Antimicrobile Nitrile Rubber ( Cl Ass O ) Insulation On Existing Surface After App Lying Two Coats Of Cold Setting Adhesive As Requir Ed. , Surgical Scrub (2 Bay). , Supplying, Fixing Installation, Testing Andcommissioning Of Scrub Sink With The Following Specifications:- Compact Surgical Scrub Sink Should Be Designed For Use In Ot Complex For Pre Procedural Scrub Up. (Double Sink Combination Size 1600 Mm X 450Mm X 1650 Mm Back Height& 1200 Mm And Front Heightas Suitable) €¢ Each Fixture Should Be Fabricated From Heavy Gauge Type 304 Stainless Steel (Minimum Thickness1.5Mm) And Should Be Seamless Welded Construction, Polished To A Satin Finish €¢ The Scrub Sink Should Be Provided With A Front Access Panel Which Should Be Easily Removed For Access To The Water Controlled Valve, Waste Connections, Stoppers And Strainers.€¢ Hands Free Operation Should Include Infra-Red Sensors With Programmable Adjustment.€¢ Thermostatic Mixing, Valve Control Should Be Located Behind The Access Panel And Maintain Constant Water Temperature.€¢ Timing Should Be Adjustable To Meet Individual Application Requirements.€¢ Provided With Infrared Sensors, Thermostatic Control Taps With Feel Safe Temperature Controls With Foam Flow Attachments And Provide With Betadine Dispensers .€¢ All Units Should Have Reduced Anti- Splash Fronts. €¢ Knee/Foot Operated Switch Should Be Provided Additionally. The Work , Sliding Type Hermitically Sealed Ot Door (Autometic) , Supply & Fixing Of Sliding Type Ot Door Having High Density Particle Board Cores, High Pressure Laminate Face On Both Sides, Viewing Window 300 X 300Mm. Standard Size: 1500 X 2100 Mm (W X H) , Surgeon Control Panel. , Supply, Installation, Testing & Commissioning Of Multi Colour Coded Surgeon Control Membrane Touch Panel, Flushed In The Theatre Wall Comprising Of The Following Features & As Per Technical Specification Attached: 1. Display Of Day Clock 2. Display Of Elapse Time Clock 3. Dimmer For Peripheral Lights 4. Medical Gas Alarm 5. Hands Free Telephone 6. Indicator For Temperature & Humidity. , X-Ray View Screen. , Supply, Installation, Testing & Commissioning Of Twin Plate X- Ray Viewing Screen Designed To Provide A High Level Of Control Luminance Without Flickering & As Per The Technical Specification Attached. X-Ray View Screen (Two Screen) Led Overall Dimensions (Lxhxt) 880 X 503 X 29Mm View Area (Wxh) : 736 X 440 Mm Light Source : Led Power Consumption / Input Power : 30W / Ac 100-240V Illumination Intensity : 5,500 Lux Approx. , Surgeon Pendent , Providing & Fixing Of Singale Arm Multi Moveable Surgeons Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthesia Pendant . , Providing & Fixing Of Single Arm (900Mm) Anaesthesia Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthsia Trolley: Made Of Composite Laminate - Overall Size 950Mmx600mmx570mm H - Cosmokartz Or Equivalent , Eye Ot Table Opthal Ot Table , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro- Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type Water Proof Rubber Mattress 1 Pc. 1 Pair 2 Pcs. 1 Pair 1 Pair 1 Pair 1 Set , Instrument Trolley Fully Ss - Double Shelf, Three Sides Railings., Mounted On 5 Diawheels , Two With Brakes, Size 30X18X36H All 304Gss , Led Operating Light , Providing & Installation Of Led Operating Light Having Maximum Illuminance (1M): 160,000 + 160,000 Lux At 1M Distance, Electrical Power: 150 + 90 W, Power Consumption: 2X 11 A, Fitting: Ceiling Anchoring Ring Ceiling Pendant With 2 Brackets And 2 Spring Arms, Range Of Movement: 1X 360° / 1X 330°, Recommended Room Height: At Least 2.45 M, Max. Ceiling Load: 2X 218 Nm / 650 N, Light Body Weight: 9.2 + 7.5Kgs, Light Body Depth: 1X 130 Cm / 1X 140 Cm, Air Shielding Surface: 2 X 330 Cm2 Transformers: 2X 450Va/230V/26V, Brightness Regulator: 2X 20 - 500 Va (Primary Voltage), Provided With 2 Sterilisable Handles With Each Dome, Easy Positioning By Sterilisable Handle, Focus Adjustable By Sterilisable Handle, Life Time Of Bulbs : 45,000 Hours Etc As Per Technical Specifications Attached , Electrical Works & Distribution Board : Supply Laying, Fixing And Testing Of Flexible Copper Wire Thick 2.5Mm Single Core For Equipment,Electrical Power Control , Lights, As Per Requirement , Floor Mate (Icu/Ot Grade) Paint Should Not React With Betadine (Yellow Patch Of Betadine One Floor Looks Very Ankwred) , Glove Box , Multiple Electric Plug Points (65A) For Carm Lithoclast Lap Tower With Complete Electrical Fittings. , Add 18% Gst (In Basic Rate Must Fill 0.18) , Add 1% Labour Cess (In Basic Rate Must Fill 0.01)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Jharkhand View Result →
2.
Housing Urban and Rular Development #11346477 Technical Bid
Tender for Construction Of Modular Ot (Eye) Under Sub Divisional Hospital At Madhupur Dist Deoghar For The Year-2025-26. , Egp. Puff Panels For O.T Wall Walls &Ceiling , Supply, Installation, Testing And Commissioning Of Modular Ot Walland Corner Panels With Insulated Prefabricated Puff Panels. The Ot Wall Shall Be Constructed Using Egp Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The Panel Of The Theatre Shall Be Sufficient For , G.I. Puff Panels For Ot Ceiling , Modular Ot Ceiling Panels With Insulated Prefabricated Puff Panels. The Ot Ceiling Shall Be Constructed Using Gi Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The , Antibacterial / Antifungal Paint. , Providing And Establishing Anti-Bacterial & Anti Fungicidal Sterile Coating Of Liquid Plastic Paint On Gi Puff/Ss Panel Of Modular Ot. The Paint Should Be Seamless, Easy To Clean, Should Have Vapor Permeability Which Allows Substrate Moisture To Escape And Protects Against Growth Of Bacteria, Mound And Yeasts, Moisture Resistance, Freeze / Thaw Resistance. Anti- Bacterial Anti Microbial Quality Should Remain Active Throughout The Life Of The Product. Vapors Permeable Structure Should Allow Damp Substrates To Dry Out Without Causing Blistering. It Should Tolerate Cleaning With Hospital Chemical Agents. Filling Of All Joints And Cavities Should Be With Metallic Epoxy Filler And Sand Casted Flush To Provide A Joint-Less Finish. This Should Include All Fittings, Accessories, Hardware, Support Structures, Etc. Required For Installation. Anti-Bacterial And Anti-Fungus Sterile Coating Shall Be Applied On The Finished Walls & Ceiling With At Least 2-3 Coats To Achieve A Thickness Of Minimum 200 Micron. Before Application Of Sterile Wall Coating An Appropriate Primer Shall Be Applied. The Primer Shall Be Supplied Along With The Paint And Should Be Of The Same Make As That Of Paint. And Shall Be Applied Prior To Coating Of Anti-Bacterial & Anti- Fungus Sterile Paint On Walls & Ceiling 2-3 Coats Shall Be Applied To Achieve A Thickness Of 200 , Laminar Air Flow , The Range Of Ventilated Ceiling Should Provide The Sterility And Cleanliness Required For Ot Environ Ment. Perfect Tightness Should Be Guaranteed By A N Epoxy Seal Between Filters And Holding Structure Disabling €Œby Pass†Of Hepa Filters. Two Nos . Pressure Measurement Ports Shall Be Provided In Each Housingairflow: 50 +-10% Fpm Class 100/Iso C Lass 5 As Per International Standard & Meets Din 1 946-4. D.O.P. Tested Point To P Oint Scanned Minipleat Hepa Filters Having Followi Ng Technical Specifications To Be Fixed In Above H Ousings F Rame € Aluminium. Type € Flange Type. Media € Micro Fiber Glass . Se Aling Of Media € By Means Of Epoxy. I.P.D. - 15 Mm Wg. F.P.D. € 50 Mm Wg. Separators € Concealed Al. Or Hot Melt G Lue. Capacity € 500 Cfm Size Of Laf - 2400 X 2400 Mmthe Work Should Be Executed As Per The Direction Of Enginee R In Charge , Homogeneous Conductive Pvc Vinyl Flooring In O.T.,Icu,Opd. , Providing And Fixing 2 Mm Thick Homogeneous Conductive Pvc Jeoflor Electro + Sd Roll Acts As A Continous Conductive 10^6 Rt10^8. It Has Preminum Antistatic Properites, ( 100 V) The Product Has To Be Groundedwith An Esd Copper Strip( Cf. Finishes To Meet Its Full Performance The Product Is Non Reactive To Residual Indentation With A Value 0.02 Mm. The Flooring Is A Group Twear Rating Suitableheavey Duty Trafficareasand Bfi-S1 Fire Resisteance. The Product Is Non -Emissive Of Volatile Organic Compounds With 10Ug/M2 ( Tvoc After 28 Days Iso 1000-6.Total Thickness En428 2Mm, En 430 G/Sq.M 2900, Width 426 Cm/Lm 200/20, En (European Standard) En 685 Classs 34-43, Fire Rating En1081 0Hm 1^^6 Rt 10^8 Make Jeo Flor Esd Coundictive Flooring , Writing White Board. , Supply & Installation Of Writing Unit/White Boardof Size 900/600 Mm Having 1.60 Mm Thick White Laminate Board Top, Bonded To A 40 Mm High Density Fiber Board Sheet For Additional Rigidity. The Unit Should Open To Create A Wall Mounted Writing Surface Within The Operating Room. The Work Should Be Executed As Per The Direction Of Engineer-In-Charge. , Storage Unit . , Supply And Installation Of Storage Unit Of Ss 304Of Reputed Make And Having Size 1665 X 865 X350 Mm And Having Two Or More Glass Shelves Of Toughened Glass 10 Mm Thick, Supported With D Type Bracket (Ss 304 Grade) With 10 Mm Thickness And Rubber Gasket Of 2Mm And Mounted Flush On Wall. The Work Should Be Executed As Per The Directions Of Engineer-In-Charge. , Pressure Release Damper. , Supply, Installation, Testing & Commissioning Of Ss Fabricated Cascade Pressure Stabilizer Having Ss Blades To Control Operation Theatre Room - Air Pressure Of Approved Make As Per Tech. Specs Attached. , Peripheral Lights (Dimmable). , Supplying & Fixing Of Sturdy Writing Board Of Size: 840Mm X 640Mm With Perfect Marker Writing Surface In Front And Back Is Laminated To Make Water Proof Surface. The Board Has To Be Provided With Anodized Aluminium Framing And Its Back Should Have Hooks For Wall Hanging Of Approved Make And Type Directly On Wall , Ahu With Outdoor Unit Ac 11.5 Tr Including Insttalation , Double Skin Air Handling Unit :Supply, Installatio N, Testing And Commissioning Of Double Skin Constr Uction Air Handling Units. With Inner Sheet Ss 304 And Ouer Sheet Ppgi With 40 Mm Panel Thickness With Mixing Box With Fa,Ra,Sa Dampers, Fitted With 2 Stage Filteration Arrangment Completed With 10 Micron Filters 5 Mico Nfilter After Fan Section. Suitable For Outdoor In Stallation With 45 Mm Thick Panels With Inner Skin 0.6Mm Thick Aluminium Sheet, Thermal Breack And W Eather Proof.Motor Efficiency Factor - Ie-2Â- Mix Ing Box With Manually Operated Fresh & Return Air Al Dampers.Â- Filter Section With 50 Mm Thick Box Type Pre-Filter (Merv-8) & 305 Mm Thick Rigid Med Ia Type Fine Filter (Merv-10) Mounted On A Common Filter Frame & Viscous/ Wasable Synthetic Type Air Pre-Filterâ- Coil Section With 8 Row Deep Dx Coi L . Fin Material - Plain Aluminium Fin Spacing - 1 1-13 Fpi, Condensing Tray - 22G Ss304, Test Pressu Re - 38Kg/Sq.Cm. Insulation Material For Drain Tra Y-13Mm Thick Close Cell Nitrile Rubber.Â- Uv Lamp , Aluminum Ductiing 22 Gaze , Ducting : ( Al. Sheet Metal )Ducting:- Supply And Fixing Of Site Fabricatedal Sheet Metal Ducts In A Ccordance With Theapproved Shop Drawings And As Re Quired As Per Specifications.All Necessary Gi /Ms Supports Using Thread Rods (As Directed). Angle, F Lat, And Anchor Bolts, Food Grade Neoprene Gaskets , Food Grade Adhesive Included In The Scope. , Insulation , Underdeck Insulation :Supplying And Fixing Of Unde Rdeck Roof Insulation Of 13 Mm Thickness Of Mat Fi Nish Closed Cell Antimicrobile Nitrile Rubber ( Cl Ass O ) Insulation On Existing Surface After App Lying Two Coats Of Cold Setting Adhesive As Requir Ed. , Surgical Scrub (2 Bay). , Supplying, Fixing Installation, Testing Andcommissioning Of Scrub Sink With The Following Specifications:- Compact Surgical Scrub Sink Should Be Designed For Use In Ot Complex For Pre Procedural Scrub Up. (Double Sink Combination Size 1600 Mm X 450Mm X 1650 Mm Back Height& 1200 Mm And Front Heightas Suitable) €¢ Each Fixture Should Be Fabricated From Heavy Gauge Type 304 Stainless Steel (Minimum Thickness1.5Mm) And Should Be Seamless Welded Construction, Polished To A Satin Finish €¢ The Scrub Sink Should Be Provided With A Front Access Panel Which Should Be Easily Removed For Access To The Water Controlled Valve, Waste Connections, Stoppers And Strainers.€¢ Hands Free Operation Should Include Infra-Red Sensors With Programmable Adjustment.€¢ Thermostatic Mixing, Valve Control Should Be Located Behind The Access Panel And Maintain Constant Water Temperature.€¢ Timing Should Be Adjustable To Meet Individual Application Requirements.€¢ Provided With Infrared Sensors, Thermostatic Control Taps With Feel Safe Temperature Controls With Foam Flow Attachments And Provide With Betadine Dispensers .€¢ All Units Should Have Reduced Anti- Splash Fronts. €¢ Knee/Foot Operated Switch Should Be Provided Additionally. The Work , Sliding Type Hermitically Sealed Ot Door (Autometic) , Supply & Fixing Of Sliding Type Ot Door Having High Density Particle Board Cores, High Pressure Laminate Face On Both Sides, Viewing Window 300 X 300Mm. Standard Size: 1500 X 2100 Mm (W X H) , Surgeon Control Panel. , Supply, Installation, Testing & Commissioning Of Multi Colour Coded Surgeon Control Membrane Touch Panel, Flushed In The Theatre Wall Comprising Of The Following Features & As Per Technical Specification Attached: 1. Display Of Day Clock 2. Display Of Elapse Time Clock 3. Dimmer For Peripheral Lights 4. Medical Gas Alarm 5. Hands Free Telephone 6. Indicator For Temperature & Humidity. , X-Ray View Screen. , Supply, Installation, Testing & Commissioning Of Twin Plate X- Ray Viewing Screen Designed To Provide A High Level Of Control Luminance Without Flickering & As Per The Technical Specification Attached. X-Ray View Screen (Two Screen) Led Overall Dimensions (Lxhxt) 880 X 503 X 29Mm View Area (Wxh) : 736 X 440 Mm Light Source : Led Power Consumption / Input Power : 30W / Ac 100-240V Illumination Intensity : 5,500 Lux Approx. , Surgeon Pendent , Providing & Fixing Of Singale Arm Multi Moveable Surgeons Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthesia Pendant . , Providing & Fixing Of Single Arm (900Mm) Anaesthesia Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthsia Trolley: Made Of Composite Laminate - Overall Size 950Mmx600mmx570mm H - Cosmokartz Or Equivalent , Eye Ot Table Opthal Ot Table , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro- Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type Water Proof Rubber Mattress 1 Pc. 1 Pair 2 Pcs. 1 Pair 1 Pair 1 Pair 1 Set , Instrument Trolley Fully Ss - Double Shelf, Three Sides Railings., Mounted On 5 Diawheels , Two With Brakes, Size 30X18X36H All 304Gss , Led Operating Light , Providing & Installation Of Led Operating Light Having Maximum Illuminance (1M): 160,000 + 160,000 Lux At 1M Distance, Electrical Power: 150 + 90 W, Power Consumption: 2X 11 A, Fitting: Ceiling Anchoring Ring Ceiling Pendant With 2 Brackets And 2 Spring Arms, Range Of Movement: 1X 360° / 1X 330°, Recommended Room Height: At Least 2.45 M, Max. Ceiling Load: 2X 218 Nm / 650 N, Light Body Weight: 9.2 + 7.5Kgs, Light Body Depth: 1X 130 Cm / 1X 140 Cm, Air Shielding Surface: 2 X 330 Cm2 Transformers: 2X 450Va/230V/26V, Brightness Regulator: 2X 20 - 500 Va (Primary Voltage), Provided With 2 Sterilisable Handles With Each Dome, Easy Positioning By Sterilisable Handle, Focus Adjustable By Sterilisable Handle, Life Time Of Bulbs : 45,000 Hours Etc As Per Technical Specifications Attached , Electrical Works & Distribution Board : Supply Laying, Fixing And Testing Of Flexible Copper Wire Thick 2.5Mm Single Core For Equipment,Electrical Power Control , Lights, As Per Requirement , Floor Mate (Icu/Ot Grade) Paint Should Not React With Betadine (Yellow Patch Of Betadine One Floor Looks Very Ankwred) , Glove Box , Multiple Electric Plug Points (65A) For Carm Lithoclast Lap Tower With Complete Electrical Fittings. , Add 18% Gst (In Basic Rate Must Fill 0.18) , Add 1% Labour Cess (In Basic Rate Must Fill 0.01)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Jharkhand View Result →
3.
Housing Urban and Rular Development #11346476 Technical Bid
Tender for Construction Of Modular Ot (General & Gynae) At Chc Under Sarwan Block At Deoghar For The Year-2025-26. , Egp. Puff Panels For O.T Wall Walls &Ceiling , Supply, Installation, Testing And Commissioning Of Modular Ot Walland Corner Panels With Insulated Prefabricated Puff Panels. The Ot Wall Shall Be Constructed Using Egp Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The Panel Of The Theatre Shall Be Sufficient For , G.I. Puff Panels For Ot Ceiling , Modular Ot Ceiling Panels With Insulated Prefabricated Puff Panels. The Ot Ceiling Shall Be Constructed Using Gi Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The , Antibacterial / Antifungal Paint. , Providing And Establishing Anti-Bacterial & Anti Fungicidal Sterile Coating Of Liquid Plastic Paint On Gi Puff/Ss Panel Of Modular Ot. The Paint Should Be Seamless, Easy To Clean, Should Have Vapor Permeability Which Allows Substrate Moisture To Escape And Protects Against Growth Of Bacteria, Mound And Yeasts, Moisture Resistance, Freeze / Thaw Resistance. Anti- Bacterial Anti Microbial Quality Should Remain Active Throughout The Life Of The Product. Vapors Permeable Structure Should Allow Damp Substrates To Dry Out Without Causing Blistering. It Should Tolerate Cleaning With Hospital Chemical Agents. Filling Of All Joints And Cavities Should Be With Metallic Epoxy Filler And Sand Casted Flush To Provide A Joint-Less Finish. This Should Include All Fittings, Accessories, Hardware, Support Structures, Etc. Required For Installation. Anti-Bacterial And Anti-Fungus Sterile Coating Shall Be Applied On The Finished Walls & Ceiling With At Least 2-3 Coats To Achieve A Thickness Of Minimum 200 Micron. Before Application Of Sterile Wall Coating An Appropriate Primer Shall Be Applied. The Primer Shall Be Supplied Along With The Paint And Should Be Of The Same Make As That Of Paint. And Shall Be Applied Prior To Coating Of Anti-Bacterial & Anti- Fungus Sterile Paint On Walls & Ceiling 2-3 Coats Shall Be Applied To Achieve A Thickness Of 200 , Laminar Air Flow , The Range Of Ventilated Ceiling Should Provide The Sterility And Cleanliness Required For Ot Environ Ment. Perfect Tightness Should Be Guaranteed By A N Epoxy Seal Between Filters And Holding Structure Disabling €Œby Pass†Of Hepa Filters. Two Nos . Pressure Measurement Ports Shall Be Provided In Each Housingairflow: 50 +-10% Fpm Class 100/Iso C Lass 5 As Per International Standard & Meets Din 1 946-4. D.O.P. Tested Point To P Oint Scanned Minipleat Hepa Filters Having Followi Ng Technical Specifications To Be Fixed In Above H Ousings F Rame € Aluminium. Type € Flange Type. Media € Micro Fiber Glass . Se Aling Of Media € By Means Of Epoxy. I.P.D. - 15 Mm Wg. F.P.D. € 50 Mm Wg. Separators € Concealed Al. Or Hot Melt G Lue. Capacity € 500 Cfm Size Of Laf - 2400 X 2400 Mmthe Work Should Be Executed As Per The Direction Of Enginee R In Charge , Homogeneous Conductive Pvc Vinyl Flooring In O.T.,Icu,Opd. , Providing And Fixing 2 Mm Thick Homogeneous Conductive Pvc Jeoflor Electro + Sd Roll Acts As A Continous Conductive 10^6 Rt10^8. It Has Preminum Antistatic Properites, ( 100 V) The Product Has To Be Groundedwith An Esd Copper Strip( Cf. Finishes To Meet Its Full Performance The Product Is Non Reactive To Residual Indentation With A Value 0.02 Mm. The Flooring Is A Group Twear Rating Suitableheavey Duty Trafficareasand Bfi-S1 Fire Resisteance. The Product Is Non -Emissive Of Volatile Organic Compounds With 10Ug/M2 ( Tvoc After 28 Days Iso 1000-6.Total Thickness En428 2Mm, En 430 G/Sq.M 2900, Width 426 Cm/Lm 200/20, En (European Standard) En 685 Classs 34-43, Fire Rating En1081 0Hm 1^^6 Rt 10^8 Make Jeo Flor Esd Coundictive Flooring , Writing White Board. , Supply & Installation Of Writing Unit/White Boardof Size 900/600 Mm Having 1.60 Mm Thick White Laminate Board Top, Bonded To A 40 Mm High Density Fiber Board Sheet For Additional Rigidity. The Unit Should Open To Create A Wall Mounted Writing Surface Within The Operating Room. The Work Should Be Executed As Per The Direction Of Engineer-In-Charge. , Storage Unit . , Supply And Installation Of Storage Unit Of Ss 304Of Reputed Make And Having Size 1665 X 865 X350 Mm And Having Two Or More Glass Shelves Of Toughened Glass 10 Mm Thick, Supported With D Type Bracket (Ss 304 Grade) With 10 Mm Thickness And Rubber Gasket Of 2Mm And Mounted Flush On Wall. The Work Should Be Executed As Per The Directions Of Engineer-In-Charge. , Pressure Release Damper. , Supply, Installation, Testing & Commissioning Of Ss Fabricated Cascade Pressure Stabilizer Having Ss Blades To Control Operation Theatre Room - Air Pressure Of Approved Make As Per Tech. Specs Attached. , Peripheral Lights (Dimmable). , Supplying & Fixing Of Sturdy Writing Board Of Size: 840Mm X 640Mm With Perfect Marker Writing Surface In Front And Back Is Laminated To Make Water Proof Surface. The Board Has To Be Provided With Anodized Aluminium Framing And Its Back Should Have Hooks For Wall Hanging Of Approved Make And Type Directly On Wall , Ahu With Outdoor Unit Ac 11.5 Tr Including Insttalation , Double Skin Air Handling Unit :Supply, Installatio N, Testing And Commissioning Of Double Skin Constr Uction Air Handling Units. With Inner Sheet Ss 304 And Ouer Sheet Ppgi With 40 Mm Panel Thickness With Mixing Box With Fa,Ra,Sa Dampers, Fitted With 2 Stage Filteration Arrangment Completed With 10 Micron Filters 5 Mico Nfilter After Fan Section. Suitable For Outdoor In Stallation With 45 Mm Thick Panels With Inner Skin 0.6Mm Thick Aluminium Sheet, Thermal Breack And W Eather Proof.Motor Efficiency Factor - Ie-2Â- Mix Ing Box With Manually Operated Fresh & Return Air Al Dampers.Â- Filter Section With 50 Mm Thick Box Type Pre-Filter (Merv-8) & 305 Mm Thick Rigid Med Ia Type Fine Filter (Merv-10) Mounted On A Common Filter Frame & Viscous/ Wasable Synthetic Type Air Pre-Filterâ- Coil Section With 8 Row Deep Dx Coi L . Fin Material - Plain Aluminium Fin Spacing - 1 1-13 Fpi, Condensing Tray - 22G Ss304, Test Pressu Re - 38Kg/Sq.Cm. Insulation Material For Drain Tra Y-13Mm Thick Close Cell Nitrile Rubber.Â- Uv Lamp , Aluminum Ductiing 22 Gaze , Ducting : ( Al. Sheet Metal )Ducting:- Supply And Fixing Of Site Fabricatedal Sheet Metal Ducts In A Ccordance With Theapproved Shop Drawings And As Re Quired As Per Specifications.All Necessary Gi /Ms Supports Using Thread Rods (As Directed). Angle, F Lat, And Anchor Bolts, Food Grade Neoprene Gaskets , Food Grade Adhesive Included In The Scope. , Insulation , Underdeck Insulation :Supplying And Fixing Of Unde Rdeck Roof Insulation Of 13 Mm Thickness Of Mat Fi Nish Closed Cell Antimicrobile Nitrile Rubber ( Cl Ass O ) Insulation On Existing Surface After App Lying Two Coats Of Cold Setting Adhesive As Requir Ed. , Surgical Scrub (2 Bay). , Supplying, Fixing Installation, Testing Andcommissioning Of Scrub Sink With The Following Specifications:- Compact Surgical Scrub Sink Should Be Designed For Use In Ot Complex For Pre Procedural Scrub Up. (Double Sink Combination Size 1600 Mm X 450Mm X 1650 Mm Back Height& 1200 Mm And Front Heightas Suitable) €¢ Each Fixture Should Be Fabricated From Heavy Gauge Type 304 Stainless Steel (Minimum Thickness1.5Mm) And Should Be Seamless Welded Construction, Polished To A Satin Finish €¢ The Scrub Sink Should Be Provided With A Front Access Panel Which Should Be Easily Removed For Access To The Water Controlled Valve, Waste Connections, Stoppers And Strainers.€¢ Hands Free Operation Should Include Infra-Red Sensors With Programmable Adjustment.€¢ Thermostatic Mixing, Valve Control Should Be Located Behind The Access Panel And Maintain Constant Water Temperature.€¢ Timing Should Be Adjustable To Meet Individual Application Requirements.€¢ Provided With Infrared Sensors, Thermostatic Control Taps With Feel Safe Temperature Controls With Foam Flow Attachments And Provide With Betadine Dispensers .€¢ All Units Should Have Reduced Anti- Splash Fronts. €¢ Knee/Foot Operated Switch Should Be Provided Additionally. The Work , Sliding Type Hermitically Sealed Ot Door (Autometic) , Supply & Fixing Of Sliding Type Ot Door Having High Density Particle Board Cores, High Pressure Laminate Face On Both Sides, Viewing Window 300 X 300Mm. Standard Size: 1500 X 2100 Mm (W X H) , Surgeon Control Panel. , Supply, Installation, Testing & Commissioning Of Multi Colour Coded Surgeon Control Membrane Touch Panel, Flushed In The Theatre Wall Comprising Of The Following Features & As Per Technical Specification Attached: 1. Display Of Day Clock 2. Display Of Elapse Time Clock 3. Dimmer For Peripheral Lights 4. Medical Gas Alarm 5. Hands Free Telephone 6. Indicator For Temperature & Humidity. , X-Ray View Screen. , Supply, Installation, Testing & Commissioning Of Twin Plate X- Ray Viewing Screen Designed To Provide A High Level Of Control Luminance Without Flickering & As Per The Technical Specification Attached. X-Ray View Screen (Two Screen) Led Overall Dimensions (Lxhxt) 880 X 503 X 29Mm View Area (Wxh) : 736 X 440 Mm Light Source : Led Power Consumption / Input Power : 30W / Ac 100-240V Illumination Intensity : 5,500 Lux Approx. , Surgeon Pendent , Providing & Fixing Of Singale Arm Multi Moveable Surgeons Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthesia Pendant . , Providing & Fixing Of Single Arm (900Mm) Anaesthesia Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthsia Trolley: Made Of Composite Laminate - Overall Size 950Mmx600mmx570mm H - Cosmokartz Or Equivalent , Eye Ot Table Opthal Ot Table , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro- Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type Water Proof Rubber Mattress 1 Pc. 1 Pair 2 Pcs. 1 Pair 1 Pair 1 Pair 1 Set , Multi Purpose Ot Table With C - Arm Compitable , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro-Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type , Instrument Trolley Fully Ss - Double Shelf, Three Sides Railings., Mounted On 5 Diawheels , Two With Brakes, Size 30X18X36H All 304Gss , Led Operating Light , Providing & Installation Of Led Operating Light Having Maximum Illuminance (1M): 160,000 + 160,000 Lux At 1M Distance, Electrical Power: 150 + 90 W, Power Consumption: 2X 11 A, Fitting: Ceiling Anchoring Ring Ceiling Pendant With 2 Brackets And 2 Spring Arms, Range Of Movement: 1X 360° / 1X 330°, Recommended Room Height: At Least 2.45 M, Max. Ceiling Load: 2X 218 Nm / 650 N, Light Body Weight: 9.2 + 7.5Kgs, Light Body Depth: 1X 130 Cm / 1X 140 Cm, Air Shielding Surface: 2 X 330 Cm2 Transformers: 2X 450Va/230V/26V, Brightness Regulator: 2X 20 - 500 Va (Primary Voltage), Provided With 2 Sterilisable Handles With Each Dome, Easy Positioning By Sterilisable Handle, Focus Adjustable By Sterilisable Handle, Life Time Of Bulbs : 45,000 Hours Etc As Per Technical Specifications Attached , Electrical Works & Distribution Board : Supply Laying, Fixing And Testing Of Flexible Copper Wire Thick 2.5Mm Single Core For Equipment,Electrical Power Control , Lights, As Per Requirement , Floor Mate (Icu/Ot Grade) Paint Should Not React With Betadine (Yellow Patch Of Betadine One Floor Looks Very Ankwred) , Glove Box , Multiple Electric Plug Points (65A) For Carm Lithoclast Lap Tower With Complete Electrical Fittings. , Add 18% Gst (In Basic Rate Must Fill 0.18) , Add 1% Labour Cess (In Basic Rate Must Fill 0.01)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Jharkhand View Result →
4.
Defence #11200251 Technical Bid
Tender For Provision Of Certain Sanctioned Works Under Ge South Bathinda At Bathinda Mil Stn.- 1 Surface Excavation N.Exc (Not Exceeding) 30 Cm Deep And Averaging 15Cm Deep And Getting Out And Getting Out In Soft / Loose Soil Complete All As Specified & Directed. 2 Removing Excavated Material Exc 1.50 Km N Exc. 5 Km And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point Complete All As Specified And As Directed. 3 Excavation In Trenches Not Exceeding 1.5 Meter Wide And Not Exceeding 1.5 Meter Depth For Foundation Etc Or For Shafts , Wells, Cesspits, Manholes , Septic Tank, For Laying Of Cables , Laying Of Pipes Not Exceeding 10 Sqm On Plan And Not Exc 1.5 Meter Depth And Getting Out In Soft/Loose Soil Etc Complete All As Specified And As Directed By Engineer-In- Charge. 4 Material And Labour For Cement Concrete 1:4:8 , Type D-2 Using 40 Mm Graded Stone Aggregate As In Foundation Filling And Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 5 Material And Labour For Rcc M-25 (Design Mix) Using 20 Mm Graded Stone Aggregates As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc.; Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 6 Material And Labour For Rcc M-25 (Design Mix) Using 20 Mm Graded Stone Aggregates As In Columns, Pillars, Piers, Posts And Struts Complete All As Specified And As Directed By Engineer-In-Charge. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 7 Material And Labour For Rcc M-25 (Design Mix) Using 20 Mm Graded Stone Aggregates As In Beams, Cantilevers, Bressummers, Lintels Over 1.5 M Span And The Like Etc Complete All As Specified And As Directed By Engineer-In-Charge. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 8 Material And Labour For Rcc M-25 (Design Mix) Using 20Mm Graded Stone Aggregate As In Slabs Supported On Walls, Beams And Columns In Floors,Roofs, Landings, Balconies,Canopies, Deck Slabs And In Shelves And The Like Complete All As Specified And As Directed By Engineer-In-Charge.Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 9 Material And Labour For Formwork Of Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter On Rough Finished Flat Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 10 Material And Labour For Formwork In Square,Reactangular Or Polygonal On Rough Finished Surface Of Concrete To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions Complete All As Specified And As Directed By Engineer-In-Charge. 11 Material And Labour For Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc. On Rough Finished Flat Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 12 Material And Labour For Formwork To Soffits Of Suspended Slabs Such As Roof Slab, Floor Slabs, Landings And Similar Work Not Exceeding 200 Mm Thick (Horizontal Or Sloping) On Rough Finished Flat Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 13 Material And Labour For Formwork To Edges Of Concrete Flats, Treads, Breaks In Floors,Window Cills, Concrete Rail Ings, Openings In Concrete Walls, Floor And Roofs Not Exceeding 20Cm Wide And Sides Of Rcc/Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exceeding 10 Cm But Not Exceeding 20Cm Wide On Rough Finished Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 14 Material And Labour For Mild Steel Tmt Bars 10Mm Dia And Over Cut To Length Bent To Shape, Required Including Cranking, Bending Spirally For Hoping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Including Making Of Rungs, Handles Etc Complete All As Specified And As Directed By Engineer-In-Charge. (Note : Weight Of Binding Wire Shall Not Be Considered For Measurement And Payment Purpose.) 15 Material And Labour For Mild Steel Tmt Bars 6Mm To 8Mm Dia Cut To Length Bent To Shape, Required Including Cranking, Bending Spirally For Hoping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Including Making Of Rungs, Handles Etc Complete All As Specified And As Directed By Engineer-In-Charge. (Note : Weight Of Binding Wire Shall Not Be Considered For Measurement And Payment Purpose.) 16 Demolition Of Brick Work Or Stone / Boulder Masonry, Built In Cement Mortar Or Cement Lime Mortar Including All Quoins, Arches, Pillars, Etc, In Any Description Complete All As Specified And As Directed By Engineer-In-Charge. 17 Material And Labour For Brick Work With Sub Class ‘B’ Bricks Straight Or Curved On Plan Exceeding 6.0M Mean Radius Built In Cement Mortar 1:6 Complete All As Specified And As Directed By Engineer-In-Charge. 18 Material And Labour For Brick Work With Fly Ash Bricks Straight Or Curved On Plan Exceeding 6.0M Mean Radius Built In Cement Mortar 1:6 Complete All As Specified And As Directed By Engineer-In-Charge. 19 Material And Labour Brick Work With Sub Class ‘B’ Old Size Burnt Clay Bricks Straight Or Curved On Plan Exceeding 6 Metre Mean Radius Built In Cement Mortar 1:6, Complete All As Specified And As Directed By Engineer-In-Charge . 20 Material And Labour For Brick Work With Fly Ash Old Size Bricks, Straight Or Curved On Plan To Any Radius In Half Brick Walls Built In Cement Mortar 1:4 Complete All As Specified And As Directed By Engineer-In-Charge. 21 Demolition Of Cement Concrete (Unreinforced) In Ground Floor And Paving Not Exceeding 15Cm Thickness Below Or Above Ground Level Of Any Description And In Any Position Including Removing Rubbish Material From Building And Thrown In Low Lying Empty Area (As Per Direcction Of Age/Je) At Any Distance Upto 500 Metres From The Site Complete All As Specified And As Directed By Engineer-In-Charge 22 Material & Labour For Cement Concrete 1:3:6 Type C-2 Using 40 Mm Graded Stone Aggregate For Foundations, Fillings & Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 23 Material And Labour For Cement Concrete (1:5:10), Type E-2 Using 40 Mm Graded Stone Aggregate As In Filling Of Sunken Floors Complete All As Specified And As Directed By Engineer-In-Charge. 24 Demolition Of Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided Complete All As Specified And Directed. 25 Material And Labour For Waterproofing Treatment To Sunken Floor Using Acrylic Based Multipurpose Polymer. The Treatment Shall Be Carried Out As Per Manufactures Specification. The Treatment Shall Be Include Of The Following Elements Also: 1. Surface Preparation Of Substrate By Removing All Traces Of Contaminates, Loose And Friable Particles, Cement Laitance Oils And Grease, Water Repellent Coatings Etc2. Injection Grouting Using Cementitious Grout If Required. The Payment For Injection Grouting Shall Be Made Separately Etc3. Repair To The Substrate, Filling Of Blow Holes/Voids And Surface Leveling Using Appropriate Products Specified By The Manufacture.4. All Intersections Of Horizontal And Vertical Surface Should Be Profiled With A Mortar Fillet Of Minimum 25Mm X 25Mm.5. The Moisture Content Of The Substrate Shall Be Checked Before Application Of First Coat At Water Proof Coating At The Rate Of 200 G/M2 Followed Brush Topping At 450G/M2 Per Mm. The Second Coat Shall Be Reinforced With Glass Fabric Between The First And Second Coat.6. The Treatment Shall Be Protected By Application Of Polymer Modified Cement Mortar Of Thickness 10Mm Applied At The Rate Of 50G Per Mm.7. Tech Specification : Tensile Adhesion Strength 0.5N/Sqmm (As Bonding Slurry). 26 Material And Labour For Aerated Autoclaved Concrete (Aac) Blocks Work According To Indian Standard Specification Is:2185(Part-3)-1984 And Latest Revision Built In Cement And Sand Mortar 1:6 With Aerated Autoclaved Concrete (Aac) Blocks Straight Or Curver On Plan Exceeding 6Mtr Mean Radius As In Sunken Floor Complete All As Specified And And As Directed By Engineer-In-Charge. 27 Supply Only Integral Water Proofing Compound. 28 Removing Excavated Material As In All Kind Of Soils Not Exceeding 50M And Depositing Where Directed At A Level Not Exceeding 1.5M Above The Starting Point Complete All As Specified And As Directed By Engineer-In- Charge. 29 Returning Filling In Any Type Of Soil, Including Spreading, Levelling,Watering And Well Ramming In Layer Not Exceeding 25 Cm In Each Layer, Complete All As Specified And As Directed By Engineer-In- Charge. 30 Material And Labour For Sand Filling Under Floor Or In Foundation Including Spreading Levelling, Watering And Well Ramming In Layers Not Exc 25 Cmetc Complete All As Specified And As Directed By Engineer-In- Charge. Note: Sand Shall Be Approved By Ge. 31 Material And Labour For Hard Core Using Broken Stone Aggregate Of Gauge Not Exc. 63Mm, Deposited Spread And Leveled In Layers Not Exc. 150 Mm Thick, Watered And Rammed To A True Surface Complete All As Specified And As Directed By Engineer-In- Charge. 32 Material And Labour For 75 Mm Thick Cement Concrete 1:4:8 , Type D-2 Using 40 Mm Graded Stone Aggregate As In Sub Base Of Floor. Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. 33 Material And Labour For Rendering 10 Mm Thick In Cement Mortar 1:6 On Fair Faces Of Brick Work Or Concrete Surfaces Of Walls And Finishing The Surface Even & Fair Faces Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In- Charge. 34 Material And Labour For Rendering 5 Mm Thick In Cement Mortar In (1:3) On Ceiling And Finishing The Surface Even & Smooth Without Using Extra Cement Complete All As Specified And Directed. 35 Material And Labour For 15Mm Thick Rendering In Cement Mortar 1:4 On Fair Faces Of Brick Work Or Concrete Surfaces Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. 36 Material And Labour For 15Mm Thick Rendering In Cement Mortar 1:4 On Fair Faces Of Brick Work Or Concrete Surfaces And Finishing Fair & Even Mixed With Liquid Water Proofing Compound As Per ManufacturerS Instructions But Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. Note :- Liquid Water Proofing Compound Shall Be Measured And Paid Separately. 37 Supply And Fixing Chicken Wire Mesh ( Murga Jali ) In Cement Plaster Or Over Joints Of R.C.C And Brickwork Or As Per Site Requirement Of 24 Gauge & 12 Mm Mesh And 300 Mm Width For Construction Joints And Chasing In Brick Work For Electrical Conduits Or Water Supply Pipes And Pegs/Nails With Nailing Machine As Required Before Rendering / Plastering Etc. Complete As Per Site Requirement Complete All As Specified And As Directed By Engineer-In- Charge.Note: Rendering / Plastering Shall Be Measured And Paid Seperately Under Serial Item No. 5.00 Of ScheduleA Boq Here-In- Before. Nothing Shall Be Paid Extra On Account Of Rendering / Plastering In This Item. 38 Material And Labour For Applying Acrylic Wall Care Putty On Internal Surfaces And External Surfaces Of Walls/Ceilings/Soffits (Thickness Vary From 1.5 To 2.5 Mm As Required For Desired Smoothness And Leveling Of Surfaces In Two Or More Layers) By Using Ready Made Acrylic Wall Care Putty Including Sand Papering After Filling The Putty To Make Surface Smooth And Ready For Receiving Painting Etc Complete All As Specified And Directed By Engineer-In- Charge.Make Of Acrylic Wall Care Putty : As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After.Notes : (I) The Prepared Surface After Wall Putty, The Contractor Will Inform To The Ge As Well As To The Engineer-In-Charge For Site Inspection Before Applying Further Finishes. Please Note That The Further Finishes Work Will Start Only After Approval Of The Prepared Surface From The Ge As Well As To The Engineer-In-Charge Through Site Order. (Ii)The Make Of Acrylic Wall Care Putty Shall Be As Per The Recommendation Of Manufacturer Of Paint. 39 Material And Labour For Preparation Of New Surfaces And Applying 02 Coats Of Interior Acrylic Emulsion Paint (Light Shade As Approved By Ge ) @ 10.00 Sq.M/ Litre / 2.00 Coats By Using Roller/Brush To Wall Surfaces Over With And Including One Coat Of Interior Acrylic Emulsion Primer @ 10.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Interior Acrylic Emulsion By Using The Brands Of Interior Acrylic Emulsion Paint And Interior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 40 Material And Labour For Complete Removal Of Existing Treatment Of Any Type / Description From Wall / Rcc Surfaces / Ceiling / Chajjas / Roof Projections Etc With Mechanical Means / Grinder And Applying 01 Coat Of Exterior Emulsion Paint (Light Shade) With Highlighter Of Any Existing Shade @ 10 Sqm/Litre/1 Coat By Using Roller To External Walls / Rcc Surfaces/Soffits Of Chajjas / Roof Projections /Cantilevers/ Balcony Etc Surfaces Over Acrylic Thick Wall Care Putty On External Surfaces Of Walls / Ceiling / Soffits ( Thickness Vary From 1.5 To 2.5Mm As Required For Desired Smoothness And Levelling Of Surfaces In Two Or More Layers) By Using Ready Made Wall Care Putty Including Sand Papering After Filling The Putty To Make Surface Smooth And Ready For Receiving Painting Etc, Over Including A Coat Of Exterior Wall Primer @ 10 Sqm/Litre/1 Coat As Recommended For Under Coat By Manufacturer Of Exterior Emulsion By Using Following Brands Of Emulsion And Primer Including Removing The Vegetation Of Any Type And Description The Making The Surface Good Complete All As Specified And Directed. 41 Material And Labour For Preparation Of Old Surfaces And Applying 02 Coats Of Interior Acrylic Emulsion Paint (Light Shade As Approved By Ge ) @ 10.00 Sq.M/ Litre / 2.00 Coats By Using Roller/Brush To Wall Surfaces Over With And Including One Coat Of Interior Acrylic Emulsion Primer @ 10.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Interior Acrylic Emulsion By Using The Brands Of Interior Acrylic Emulsion Paint And Interior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 42 M&L For Preparing Existing Treated Surfaces Of Ceiling Including Cornices And Applying Two Coats Of White Wash By Making The Lime Slaked At Site And Shall Be Mixed And Stirred With About Five Liters Of Water For 1 Kg Of Unslaked Lime To Make A Thin Cream. This Shall Be Allowed To Stand For A Period Of 24 Hours And Shall Then Be Screened Through Clean Coarse Cloth. 1 Kg Of Gum Dissolved In Hot Water Shall Be Added To Every One Cubic Meter Of Lime Cream. About 1.3 Kg Of Sodium Chloride Dissolved In Hot Water Shall Also Be Added For Every 10 Kg Of Lime For Making The Coating Hard And Rub-Resistant. Small Quantity Of Ultramarine Blue (Upto 3 Gm Per Kg Of Lime) Shall Also Be Added To The White Wash Solution And The Whole Solution Shall Be Stirred Thoroughly Before Use Complete All As Specified And As Directed By Engineer-In-Charge. 43 Material And Labour For Preparation Of New Surfaces And Applying 02 Coats Of Exterior Acrylic Emulsion Paint ( Shade As Approved By Ge) With Highlighter Of Any Approved Shade, @ 5.00 Sq.M / Litre / 2.00 Coats By Using Roller To External Walls / Rcc Surfaces / Soffits Of Chajjas / Roof Projections / Cantilevers / Balcony Etc. Surfaces Over With And Including One Coat Of Exterior Acrylic Emulsion Primer @ 11.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Exterior Acrylic Emulsion By Using The Brands Of Exterior Acrylic Emulsion Paint And Exterior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 44 Material & Labour For Applying Two Or More Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Interior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm Including A Coat Of Exterior Wall Primer @ 11 Sq.M/Litre/1 Coat As Recommended For Under Coat By Manufacturer Of Exterior Emulsion By Using Following Brands Of Emulsion And Primer Complete All As Specified And Directed. 45 Material And Labour For Preparation Of Old Surfaces And Applying 02 Coats Of Exterior Acrylic Emulsion Paint ( Shade As Approved By Ge) With Highlighter Of Any Approved Shade, @ 5.00 Sq.M / Litre / 2.00 Coats By Using Roller To External Walls / Rcc Surfaces / Soffits Of Chajjas / Roof Projections / Cantilevers / Balcony Etc. Surfaces Over With And Including One Coat Of Exterior Acrylic Emulsion Primer @ 11.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Exterior Acrylic Emulsion By Using The Brands Of Exterior Acrylic Emulsion Paint And Exterior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 46 Material And Labour For Complete Removal Of Existing Treatment Of Any Type / Description From Wall / Rcc Surfaces / Ceiling / Chajjas / Roof Projections Etc With Mechanical Means / Grinder And Applying One Coat Of Exterior Emulsion Paint (Light Shade) With Highlighter Of Any Approved Shade @ 5 Sqm/Litre/2 Coats By Using Roller To External Walls / Rcc Surfaces/Soffits Of Chajjas / Roof Projections /Cantilevers/ Balcony Etc Surfaces Over & Including A Coat Of Exterior Wall Primer @ 11 Sqm/Litre/1 Coat Over Acrylic Thick Wall Care Putty On External Surfaces Of Walls / Ceiling / Soffits (Thickness Vary From 1.5 To 2.5Mm As Required For Desired Smoothness And Levelling Of Surfaces In Two Or More Layers) By Using Ready Made Wall Care Putty Including Sand Papering After Filling The Putty To Make Surface Smooth And Ready For Receiving Painting Etc As Recommended For Under Coat By Manufacturer Of Exterior Emulsion By Using Following Brands Of Emulsion And Primer Complete All As Specified And Directed.Note For Item No 5 To 8 :- (A) The Prepared Surface After Wall Putty, The Contractor Will Inform To The Ge As Well As To The Engineer-In-Charge For Site Inspection Before Applying Further Finishes. Please Note That The Further Finishes Work Will Start Only After Approval Of The Prepared Surface From The Ge As Well As To The Engineer-In-Charge Through Site Order. 47 Material And Labour For For Preparing New Plastered Surfaces Of Ceilings And Applying Three Coats Of White Wash By Making The Lime Slaked At Site And Shall Be Mixed And Stirred With About Five Liters Of Water For 1 Kg Of Unslaked Lime To Make A Thin Cream. This Shall Be Allowed To Stand For A Period Of 24 Hours And Shall Then Be Screened Through Clean Coarse Cloth. 1 Kg Of Gum Dissolved In Hot Water Shall Be Added To Every One Cubic Meter Of Lime Cream. About 1.3 Kg Of Sodium Chloride Dissolved In Hot Water Shall Also Be Added For Every 10 Kg Of Lime For Making The Coating Hard And Rub-Resistant. Small Quantity Of Ultramarine Blue (Upto 3 Gm Per Kg Of Lime) Shall Also Be Added To The Last Two Coats Of White Wash Solution And The Whole Solution Shall Be Stirred Thoroughly Before Use Complete All As Specified And Directed By Engineer-In- Charge. 48 Material And Labour For Applying Three Coats Of White Wash On Newly Plastered Or Unplastered Ceiling Surfaces Including Preparation Of Surfaces, Complete All As Specified And Directed 49 Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Not Exc 1.5 Sqm Each As Doors, Windows And Ventilators And Removal From Site Complete All As Specified And Directed. 50 Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Exc 1.5 Sqm But Not Exc 4 Sqm Each Each As Doors, Windows And Ventilators And Removal From Site Complete All As Specified And Directed. 51 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Door Frame / Chowkhat Of Size 45Mm X 70 Mm Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Fabricated With Miter Joints After Applying Pvc Solvant Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg /Cum And Screw Withdrawl Strength Of 2200 N (Face ) & 1100 N (Edge) Minimum Compressive Strength Of 58 N /Sqmm Modulus Of Elasticity 900 N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retaident And Fixed In Position With And Including Ms Hold Fast Lugs / Ss Dash Fastner Of Required Dia And Length With And Including Supply And Fixing (03 Nos Per Frame ) 100 Mm Long Ss Butt Hinges Complete All As Specified And As Directed By Engineer-In- Charge. 52 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Door Frame / Chowkhat With Double Rebate Of Size 65Mm X 125 Mm Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Fabricated With Miter Joints After Applying Pvc Solvant Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg /Cum And Screw Withdrawl Strength Of 2200 N (Face ) & 1100 N (Edge) Minimum Compressive Strength Of 58 N /Sqmm Modulus Of Elasticity 900 N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retaident And Fixed In Position With And Including Ms Hold Fast Lugs / Ss Dash Fastner Of Required Dia And Length With And Including Supply And Fixing (03 Nos Per Frame ) 100 Mm Long Ss Butt Hinges Complete All As Specified And As Directed By Engineer-In- Charge. 53 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Plain Flush Door Shutter Of 30 Mm Thick , Size Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Having Minimum Density Of 650 Kg /Cum And Screw Withdrawl Strength Of 1800 N (Face ) & 900 N (Edge) Minimum Compressive Strength Of 50 N /Sqmm Modulus Of Elasticity 850N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retardant And With And Including Supply & Fixing Of 02 Nos (Per Leaf) Ss 150Mm Long Tower Bolt, Supply & Fixing Of 02 Nos (Per Door) Ss 300Mm Long Sliding Bolt With And Including Supply & Fixing Of 02 Nos (Per Leaf) Stainless Steel 150Mm Long Handle Complete All Specified And Directed By Engineer -In-Charge. 54 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Decorative Flush Door Shutter Of 30 Mm Thick , Size Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Having Minimum Density Of 650 Kg /Cum And Screw Withdrawl Strength Of 1800 N (Face ) & 900 N (Edge) Minimum Compressive Strength Of 50 N /Sqmm Modulus Of Elasticity 850N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retardant And With And Including Supply & Fixing Of 02 Nos (Per Leaf) Ss 150Mm Long Tower Bolt, Supply & Fixing Of 02 Nos (Per Door) Ss 300Mm Long Sliding Bolt With And Including Supply & Fixing Of 02 Nos (Per Leaf) Stainless Steel 150Mm Long Handle Complete All Specified And Directed By Engineer -In-Charge. 55 Supply & Fixing Factory Made 30Mm Thick Solid Wpc ( Wood Polymer Composite ) Wiremesh Door Shutter Of Required Size Comprising Of Virgin Pvc Resin Of K Value 57-60 ( Suspension Rade ), Calcium Carbonate And Natural Fibers ( Wood Powders/ Rice Husk/ Wheat Husk ) And Non Toxic Additives, Made From Extrusion Process Wpc Foam Sheet Single Extruded ( Inner ) With Having Minimum Density Not Less Than 650 Kg/Cum , Having Good Screw Holding Capacity ( Screw Withdrawal Strength Of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Of 50 N/Mm2, Modulus Of Elasticity 850N/Mm2 And Resistance Of Spread Of Flame Of Class A Category With Property Of Being Termite/ Borer Free.Water/ Moisture Proof And Fire Retardant. Pvc Foil Of Minimum 14 Microns Thick Of Approved Design Pasted On Both Faces Of Shutter For Fixing Mosquito Mesh And Xtn Aluminium Mesh Together On Panel Area Of Door Except Stiles And Rails To Be Panelled With And Including Mesh With Self Tapping Round Headed Scresws At Required Distance, Screws And Edges Covered With Feathered Pvc Edge Beading All Around Of Mesh And Fixing Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk Ss Screws With And Including 03 Nos Door Stainless Steel Butt Hings 100Mm Long With Stainlessd Steel Screws For Each , 02 Nos Stainless Steel Barrel Tower Bolts Of Extrude Section, 150Mm Long (Isi Marked), 2 Nos Stainles Steel Handles, 125 Mm Long, (Isi Marked) , 01 No. Of Helical Door Spring Of 300 Mm Length Complete All As Specified And As Directed By Engineer-In-Charge. Note: 1. Material Test Certificate Of All The Items And Authentication Should Be Compulsory Provided By The Manufacturing Company 2. The Rate Of 03 Nos Door Stainless Steel Butt Hings 100Mm Long With Stainlessd Steel Screws For Each , 02 Nos Stainless Steel Barrel Tower Bolts Of Extrude Section, 150Mm Long (Isi Marked), 2 Nos Stainles Steel Handles, 125 Mm Long, (Isi Marked) , 01No. Of Helical Door Spring Of 300 Mm Length Is Inclusive In This Item And Nothing Shall Be Paid Extra On This Item..3. The Rate Of Mosquito Mesh And Xtn Aluminium Mesh Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 56 Supply And Fixing Factory Made Upvc White Colour Casement (Openable) Window (Area Exceeding 1.00 Sqm But Not Exceeding 2.00 Sqm Each) Made Of Extruded Profiles With Wall Thickness Of 2.3Mm ( + – 0.2Mm). Window Profile With Hollow Section With Multi Chamber, Frame (60Mm X 58Mm), Sash (60Mm X 73Mm), T Profile (One Vertical Length In Between Two Shutters) (60Mm X 74Mm), Glazing Bead (35Mm X 20Mm) Will Be Mitered Cut And Fusion Welded At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc., Making Arrangement For Fixing Of Hardware. Epdm Gasket 1.2 +– 0.2Mm Thick, Galvanized Steel Frame (28Mm X 21.5Mm), Sash (31Mm X 27.5Mm). T Profile (27Mm X 17Mm) To Be Inserted In Required Profile, Frame Will Be Fixed To The Wall With 8 Mm X 100Mm Long Fasteners. Hardware: [Casement Handle Made Of Zinc Alloyed (White Powder Coated), But Hinges OfZinc Alloyed (White Powder Coated), Transmission Gear Made Of Mild Steel With Multi Point Locking System] And 5Mm Thick Glazing With Selected Quality Glass.(Note: The Unit Rate Quoted By Contractor Excludes Cost Of Glass And Includes All Other Connected Accessories. Net Opening Will Be Measured For Payment Purpose.) 57 Material And Labour For 75 Mm Thick Pcc 1:3:6 , Type C-1 Using 20 Mm Graded Stone Aggregate As In Plinth Protection, Finishing The Surface Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In- Charge. 58 Material And Labour For 75 Mm Thick Pcc 1:3:6 , Type C-2 Using 40 Mm Graded Stone Aggregate As In Plinth Protection, Finishing The Surface Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In- Charge. 59 Demolition And Breaking Up Drain Pipes (Salt Glazed Ware, Ac Or Reinforced Concrete)Of Any Dia Set In Cement Laid In Trenches Incl All Fittings & Accessorises Complete All As Specified And As Directed By Engineer-In- Charge. 60 Supply & Fixing For 4 Mm Thick, Sheet Glass Ordinary Quality And Glazing With Oil Putty In Square Not Exceeding 0.5 Sqm In Each Pane Complete All As Specified And As Directed By Engineer-In- Charge. 61 Supply & Fixing 4.0 Mm Thick Figured Glass Pin Head Type And Glazing With Oil Putty In Square N.Exc 0.5 Sqm In Each Pane Complete All As Specified And Directed 62 Supply & Fixing 5.5 Mm Thick, Sheet Glass Ordinary Quality Not Exceeding 0.50 Sqm In Each Pane Complete All As Specified And As Directed By Engineer-In- Charge. 63 Supply & Fixing 5.5 Mm Thick, Sheet Glass Ordinary Quality Exceeding 0.50 Sqm In Each Pane Complete All As Specified And As Directed By Engineer-In- Charge. 64 Material And Labour For Providing And Fixing Aluminium Work With Polyester Powder Coated Aluminium ( Minimum Thickness Of Polyester Powder Coating 50 Micron For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/Appropriate Z Sections And Other Sections Of Approved Make Conformikng To Is:733 And Is :1285, Fixing With Dash Fasteners Of Required Dia And Size,Including Necessary Filling Up The Gaps At Junctions I.E At Top , Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth , Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Aluminium Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling , C.P. Brass/ Stainless Steel Screws, All Complete All As Specified And Directed By Engineer-In-Charge .Note :- (I) Weight Of Aluminium Sections , Aluminium Cleat Angles , Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading Shall Be Physically Ascertained Through A Board Of Officers Convened By Ge And Payment Shall Be Made Only After Ascertaining The Actual Weight Of Aluminium At Site.(Ii) The Rate Of Material And Labour For Providing The Epdm Rubber, Neoprene Gasket , C.P. Brass / Stainless Steel Screws Are Included In This Item And Nothing Shall Be Paid Extra On This Account. (Iii) During Considering The Weight Of Aluminium Sections , Aluminium Cleat Angles , Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading , The Weight Of Epdm Rubber, Neoprene Gasket , C.P. Brass/ Stainless Steel Screws Shall Not Be Considered For Measurments And Payments. Only The Weight Of The Aluminium Sections , Aluminium Cleat Angles, Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading Shall Be Considered And Measurment And Payment Shall Be Made Accourdingly.(Iv) During The Weight Of Aluminium Sections , Aluminium Cleat Angles , Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading ,The Weight Of Polyester Powder Coating 50 Micron Shall Not Be Considered For Weight But The Rate Of Material And Labour For Providing Polyester Powder Coating 50 Micron Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (V) Glazing /Paneling And Wire Mesh Shall Be Measured And Paid Seperately. (V)The Board Shall Be Duly Countersigned By Ge Shall Enclosed With Final Bill . 65 Supply & Fixing Stainless Steel Wire Cloth 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.4Mm And Fixed With Tinned Tacks To Stainless Steel Wire Staple Complete All As Specified And As Directed By Engineer-In-Charge. 66 Supply & Fixing Galvanised Ms Wire Cloth 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.4Mm And Fixed With Tinned Tacks To Galvanised Ms Wire Staple Complete All As Specified And As Directed By Engineer-In-Charge. 67 Material And Labour For Providing And Laying Premium (1St Quality) Straight Edge,Stain Free, Glooss Finish, Square Marbonite Double Charged Vitrified Tiles Size In 600Mm X 600Mm X 9Mm To 10Mm Thick As In Floors Etc. Shade As Approved By Ge , Set And Jointed With Using Spacer And Approved High Polymer Modified, Grey Cement-Based Tile Adhesive Suitable For Fixing Medium Format Tile/Stone In Walls/Floor Conforms To Is 15477 : 2019 Type 2T “Adhesives For Use With Ceramic, Mosaic And Stone Tiles” Conforms To En 12004: 2017 And Is A Normal Cementitious Adhesives (C1) With Slip Resistance (T) Of Class C1 And Necessary Grouting As Per Manufacturer’S Instruction, Completed All As Specified And Directed By Engineer-In-Charge. 68 Supply And Fixing Anodised Aluminium Snap Grid Frame Work For False Ceiling 605Mm X 605 Mm Etc Complete All As Specified And As Directed By Engineer-In-Charge. 69 Supply And Fixing False Ceiling At All Heights With Grg (Glass Fibre With Reinforced Gypsum) False Ceiling Tiles Of Size 595 X 595 Mm Of Approved Tecture Design And Patterns Having Moisture Content Less Than 2% Humidity Resistance Of 99%, Nrc 0.50 To 0.75 As Per Is 8225:1987, Noncombustible As Per Bs 476 (Part 4)- 1970 And Light Reflectance Of 85%D (Minimum) To Be Laid In True Horizontal Level Suspended On Inter Locking Metal T-Grid Of Hot Dipped Galvanisezed Iron Section Of 0.33Mm Thick (Galvanized @ 120 Grams Per Sqm Including Both Sides) Comprising Of Main T Runners Of Size 15 X 32 Mm Of Length 3000 Mm, Cross-T Of Size 15 X 32Mm Of Length 1200Mm And Secondary Intermediate Cross T Of Size 15 X 32 Mm Of Length 600Mm To Form Grid Module Of Size 600 X 600Mm, Suspended From Ceiling Using Galvanised Mild Steel Items (Galvanizing @ 80 Grams Per Sqm) I.E 50 Mm Long, 8 Mm Outer Diameter M-6 Dash Fasteners, 6Mm Dia Fully Threaded Hanger Rod Upto 1000 Mm Length And L Shape Level Adjuster Of Size 85 X 25 X 2Mm. Galvanized Iron Perimeter Wall Angle Of Size 24 X 24 X 0.40Mm Of Length 3000 Mm To Be Fixed On Periphery Wall I Partition With Help Of Plastic Rawl Plugs At 450 Tiles Fully Center To Center And 40Mm Long Dry Wall Wodd Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-In-Charge. 70 Material And Labour Anodised Aluminium Frame For Doors, Windows, Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc. Omplete All As Specified And As Directed By Engineer-In-Charge. 71 Material And Labour For Providing And Fixing Aluminium Work With Polyester Powder Coated Aluminium ( Minimum Thickness Of Polyester Powder Coating 50 Micron For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/Appropriate Z Sections And Other Sections Of Approved Make Conformikng To Is:733 And Is :1285, Fixing With Dash Fasteners Of Required Dia And Size,Including Necessary Filling Up The Gaps At Junctions I.E At Top , Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth , Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Aluminium Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling , C.P. Brass/ Stainless Steel Screws, All Complete All As Specified And Directed By Engineer-In-Charge .Note :- (I) Weight Of Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading Shall Be Physically Ascertained Through A Board Of Officers Convened By Ge And Payment Shall Be Made Only After Ascertaining The Actual Weight Of Aluminium At Site.(Ii) The Rate Of Material And Labour For Providing The Epdm Rubber, Neoprene Gasket , C.P. Brass / Stainless Steel Screws Are Included In This Item And Nothing Shall Be Paid Extra On This Account. (Iii) During Considering The Weight Of Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading , The Weight Of Epdm Rubber, Neoprene Gasket , C.P. Brass/ Stainless Steel Screws Shall Not Be Considered For Measurments And Payments. Only The Weight Of The Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading Shall Be Considered And Measurment And Payment Shall Be Made Accordingly.(Iv) During The Weight Of Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading ,The Weight Of Polyester Powder Coating 50 Micron Shall Not Be Considered For Weight But The Rate Of Material And Labour For Providing Polyester Powder Coating 50 Micron Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (V) Powder Coated Butt Hinges, Aluminium Handles, Aluminium Tower Bolts & Aluminium Peg Stays Shall Be Measured And Paid Seperately Under Respective Itmes Of ScheduleA Boq.(V) Glazing /Paneling And Wire Mesh Shall Be Measured And Paid Seperately. (Vi)The Board Shall Be Duly Countersigned By Ge Shall Enclosed With Final Bill 72 Material And Labour Anodised Aluminium Grill (Anodised Transparent Of Dyed To Required Shade According To Is: 1868 With Minimum Anodic Coating Of Grade Ac 15) Of Approved Design/Pattern, With Approved Standard Section And Fixed To The Existing Window Frame With C.P. Brass/Stainless Steel Screws @ 200 Mm Centre To Centre, Including Cutting The Grill To Proper Opening Size For Fixing And Operation Of Handles And Fixing Approved Anodised Aluminium Standard Section Around The Opening, All Complete As Per Requirement And Direction Of Engineer-In-Charge. 73 Taking Up Or Down Galvanised Steel Water Tubing (Gi Pipe) 15Mm Bore Including Fitting/Connection From Wall/Ceiling/Floor/Concealed Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 74 Taking Up Or Down Galvanised Steel Water Tubing (Gi Pipe) 20Mm Bore Including Fitting/Connection From Wall/Ceiling/Floor/Concealed Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 75 Supply And Fixing 16 Mm Bore Cpvc Pipe Sdr 11 With And Including Cpvc Sdr 11 Fittings And Fixed To Walls & Ceilings Or Laid In Floors, Complete Complete All As Specified And As Directed By Engineer-In-Charge 76 Supply And Fixing 20 Mm Bore Cpvc Pipe Sdr 11And Plain Cpvc Sdr 11 Fitting With All Fitting And Fixed To Walls & Ceilings Or Laid In Floors, Including Taking Down Unservicable Existing Gi Tubing Of 20Mm Bore And Fittings Complete Complete All As Specified And As Directed By Engineer-In-Charge. 77 Supply And Fixing 25 Mm Bore Cpvc Pipe Sdr 11And Plain Cpvc Sdr 11 Fitting With All Fitting And Fixed To Walls & Ceilings Or Laid In Floors, Including Taking Down Unservicable Existing Gi Tubing Of 20Mm Bore And Fittings Complete Complete All As Specified And As Directed By Engineer-In-Charge. 78 Material And Labour For Cutting Chases In Brick Wall , Pinning In. Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 Or Pcc 1:2:4 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc., And Making Good, Cutting Exc 10 Cm But Not Exc 20 Cm Girth Complete All As Specified And As Directed By Engineer-In- Charge.. 79 Supply And Fixing In Repair Brass Chromium Plated Wall Mixer For Mixing Hot & Cold Water Screwed Down, Screwed For 15Mm Bore Pipe Or For Brass Ferrule Complete All As Specified And As Directed By Engineer-In-Charge. 80 Supply And Fixing In Repair Bib Taps Cost Copper Alloy With Crutch Or Butterfly Handle , Screwed Down , Chromium Plated Screwed For Iron Pipe Or Brass Ferrul For 15Mm Bore Dia Pipe Complete All As Specified And Director. 81 Supply And Fixing In Reapir 15Mm Bore Bib Tap, Long Body, Fancy Type, Chromium Plated, Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Complete All As Specified And As Directed By Engineer-In-Charge. 82 Supply And Fixing In Repair 15Mm Bore Stop Valves, Fancy Type, Chromium Plated With Long Shank And Cup (Concealed Type) Cast Copper Alloy, Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Screwed Both Ends For Iron Pipe Or For Unions And Fixed For Iron Pipe Or For Brass Ferrule Complete All As Specified & Directed By Engineer-In-Charge. 83 Supply And Fixing In Repair Angular Stop Cock With Wall Flange, Fency Type Chromium Plated Cast Copper Alloy Screwed Down, High Pressure, Screwed One Ends For 15Mm Bore Of Iron Pipe Or For Union And Fixed In Position Complete All As Specified & Directed By Engineer-In-Charge. 84 Supply And Fixing In Repair Vitreous China Wash Hand Basin, White, Flat Back, Size 450Mm X 300 Mm Including Cast Iron Cantilever Bracket With And Including 32 Mm Dia Brass Waste Coupling And With And Including Fixing Of Waste Fitting And Union Complete All As Specified And As Directed By Engineer-In-Charge. 85 Supply And Fixing In Repair Ptmt Mirror Cabinet Of Size 380Mm X 450Mm Best Quality Confirming Ot Sample Kept In GeS Office Complete All As Specified And Directed By Engineer-In-Charge. 86 Supply And Fixing In Replacement Sink With Drainage Board Made Of Stainless Steel 1 Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X460Mm Bowl Size 410Mm X330Mm X160Mm Complete All As Specified And As Directed By Engineer-In-Charge. 87 Supply & Fixing In Replacement Brass Cp Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe And Fixed For Iron Pipe 15Mm Bore Complete All As Specified And As Directed By Engineer-In-Charge. 88 Supply And Fixing In Repair Stainless Steel Plate Rack Of Size 900Mm X 600Mm X 250Mm And Thickness Of Stainless Steel Strip Of 1Mm Fixed On Wall Etc. Complete All As Specified And Directed . 89 Material And Labour For Cutting Holes In Brick Walls Built In Cement Mortar (Not Exceeding Half Brick) For Inserting Hold Fast And Making Good Dismantled Portion In Cm 1:3 Or Cement Concrete 1 : 2 : 4 , Type B1 As Required , Depth Of Embedded Portion Exceeding Half Brick Walls And Not Exceeding One Brick Of Hold Fast Or Lugs Measured From The Face Of The Jamb Into Walls Complete All As Specified And As Directed By Engineer-In- Charge. 90 Material And Labour For In Repair Vitreous China Wash Down Water Closet Pan Wall Hanging Single Piece (With And Including Flushing Cistern Ewc) P Trap, With And Including White Coloured Closed Pattern Plastic Seat Cover, Hand Faucet , With And Including Mild Steel Chromium Plated Or Aluminised Hinging Device Complete All As Specified And As Directed By Engineer-In- Charge. 91 S & F In Repairs Cp Stainless Steel Grating (With Or Without Waste Hole), 125Mm Size, Fixed On Floor/Nahani Gully Trap Traps Etc Complete All As Specified And Directed. 92 S&F In Repair 25Mm Dia And 1Mm Thick Stainless Steel Drapery Rod Including With Bracket / Wall And Other Side Fancy Knobs At Both Ends As Approved By Engineer-In-Charge/Ge Including Taking Down Old Existing Rod/Pelmet With Accessories Complete All As Specified. 93 Supply And Fixing Cp Brass Fancy Type Corner Glass Shelf (25Cm/30Cm ) With Cp Brass Bracket & Railing Etc. Complete All As Specified And As Directed By Engineer-In- Charge. 94 Supply And Fixing In Repair Stainless Steel, Chromium Plated, Decorative Type, Soap Dish Holder Of Approximate Size 160Mm X 160Mm X 90 Mm Fixed To Wall With Rubber Plugs Complete All As Specified And As Directed By Engineer-In-Charge. 95 Supply & Fixing In Replacement Brass Chromium Plated Tubular Towel Rail 20Mm Dia D Type, 600Mm Long Between Flanges Fixed To Plug , Bracket With Chromium Plated Brass Screws Complete All As Specified And Directed By Engineer-In-Charge. 96 Supply And Fixing 110 Mm Bore Of Pipe Pvc (Swr) Type B Pipes Single Socket 6 Kg/Sq Cm In Any Length With Stack Clamps Made Out Of 50Mm By 5 Mm Flat Iron And 16Mm Dia Round Iron Stays, Including Bolts And Nuts And Securing Ends Of Stays To Wall At A Distance Of 100-120Mm Away From Walls Complete All As Specified And As Directed By Engineer-In- Charge. Including Taking Down Old Ac Eaves Gutters And Rainwater Pipes ( Of Any Size And Pattern), Including All Fittings, Compete All As Specified And As Directed By Engineer - In-Charge. 97 Supply & Fixing 110 Mm Bore Of Pipe Pvc (Swr) Type B Ring Fit Pipes Single Socket In Any Length With Stack Clamps As Shown In Btd Drg No. 916 Sheet 1/4 To 4/4 And Btd-917 Sheet Sheet 1/1 Of Stays To Wall At A Distance Of 100-120Mm Away From Walls Complete All As Specified And As Directed By Engineer-In- Charge Including Taking Down Old Ac Eaves Gutters And Rain Water Pipes ( Of Any Size And Pattern) Including All Fittings, Compete All As Specified And As Directed By Engineer - In-Charge. 98 Dismantling And Disconnecting Of Existing Ci Soil Vent Pipe 100 Mm Bore Fixed To Wall,Laid In Trenches Incl All Fittings & Accessories Complete All As Specified And Directed. 99 Dismantling And Disconnecting Of Existing Ci Soil Vent Pipe 75 Mm Bore Fixed To Wall,Laid In Trenches Incl All Fittings & Accessories Complete All As Specified And Directed. 100 Supply And Fixing 110 Mm Bore, Pvc (Swr) Fittings Type -B Such As Bends, Tee, Shoe Etc; Fixed To Pvc Pipes, Compete All As Specified And As Directed By Engineer - In-Charge. 101 Supply & Fixing 110Mm Bore Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Ring Joints Laid In Trenches Or In Floors Complete All As Specified And As Directed By Engineer-In- Charge. 102 S&F 110 Mm Bore Of Pvc (Swr) Bends And Tee, Type - B Of Any Radius / Shoe With Access Door Fixed To Pvc Pipes Complete All As Specified And Directed. 103 S&F 75 Mm Bore Of Pipe Pvc (Swr) Pipes Type - B Single Socket In Any Length With Rubber Ring Joint Fixed To Walls With Ms Clamps Of F1 25X2Mm Complete All As Specified And Directe 104 S&F 75 Mm Bore Of Pipe Pvc (Swr) Pipes Type - B Double Socket In Any Length With Rubber Ring Joint Fixed To Walls With Ms Clamps Of F1 25X2Mm Complete All As Specified And Directe 105 S&F 75 Mm Bore Of Pvc (Swr) Bends & Tee, Type - B Of Any Radius / Shoe With Access Door Fixed To Pvc Pipes Complete All As Specified And Directed. 106 S&F In Repairs Pvc (Swr) Gully Trap Of Size 150 X 150 Mm, Square Or Round Mouthed, Type P Setting And Jointing With Solvent Cement Complete All As Specified And Directed. 107 Supply And Fixing In Repair Pvc (Swr) Type -B Floor Trap Any Type (Q, S, P), 110/75Mm Dia With Grating Including Jointing To Waste Pipe Fixed In Cement Concrete (1:2:4) Type B-1 Using 20Mm Graded Stone Aggregate Complete All As Specified And Directed By Engineer-In- Charge. 108 Supply And Fixing In Replacement 10 Litres Capacity Pvc Valveless Syphonic Action Type Low Level Flushing Cistern White With Inlet, Ball Valve, Float, Handle Including Brackets And 32Mm Dia Pvc Flush Pipe Complete All As Specified And Directed By Engineer-In-Charge. 109 S&F In Repair Vitreous China Wash Basin, White, Oval Type , Size 450 Mm X 300 Mm Fixed On And Including Cast Iron Cantilever Bracket, 32 Mm Dia Brass Waste Coupling And Including Fixing Of Tap, Waste Fitting And Union Complete All As Specified And Directed. 110 Supply & Fixing In Repair Chromium Plated Square Shower Rose 200Mm X 200Mm Size, With Or Without Swivel Joints, Any Size, Including Fixing To Steel Pipe Or Union For 15Mm Bore Of Pipe Complete All As Specified And As Directed By Engineer-In-Charge. 111 Supply & Fixing In Repair Pvc Connections 15Mm Size With Brass Nuts Of Length 450Mm Complete All As Specified And As Directed By Engineer-In-Charge. 112 Supply & Fixing In Repair Pvc Waste Pipe With Socket Suitable For Connection To Waste Fittings Of 32/40Mm Dia, And Of Length Minimum 75 Cm Complete All As Specified And As Directed By Engineer-In-Charge. 113 Supply And Fixing In Replacement Three Layers 500 Litre Hdpe Water Storage Tanks Polyproof. White In Colour Rotational Moulded Polyethylene (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position Including Supply And Fixing Of Suitable Size Inlet/Outlet Arrangement & Other Accessories Complete All As Specified And As Directed By Engineer-In-Charge. 114 Supply And Fixing In Replacement Three Layers 1000 Litre Hdpe Water Storage Tanks Polyproof. White In Colour Rotational Moulded Polyethylene (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position Including Supply And Fixing Of Suitable Size Inlet/Outlet Arrangement & Other Accessories Complete All As Specified And As Directed By Engineer-In-Charge. 115 Supply And Fixing In Repair Ball Valve High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Of Size 20 Mm Bore (Minimum Weight 20Mm-210 Gram) Complete All As Specified And As Directed By Engineer-In- Charge. 116 Supply & Fixing In Repair Gun Metal, Globe Or Gate Valve (Isi Marked), Brass Cast Copper Alloy, With Iron Wheel Head, Screwed Both Ends Suitable For 20Mm Bore Iron Pipes Complete All As Specified And As Directed By Engineer-In-Charge. 117 Supply & Fixing In Repair Gun Metal, Globe Or Gate Valve (Isi Marked), Brass Cast Copper Alloy, With Iron Wheel Head, Screwed Both Ends Suitable For 25Mm Bore Iron Pipes Complete All As Specified And As Directed By Engineer-In-Charge. 118 Supply And Fixing In Replacement Bevelled Edge Mirror Selected Quality 5Mm Thick Glass Mounted And Fixed To With Chromium Plated Brass Screws And Cup Washers, With And Including Pvc Frame Around Made Of Pvc Channel, Complete All As Specified And Directed By Engineer-In-Charge. 119 Supply And Fixing In Repairs Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guard And Railing 60Cm Long Complete All As Specified And As Directed By Engineer-In- Charge. 120 Roughening Surfaces Of Old Concrete Floor By Picking, Sweeping Clean And Washing Down With Water To Remove Dust, Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 121 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Permises Etc. Complete All As Specified And Directed By Engineer-In-Charge. 122 M&L For Pcc (1:2:4) Type B-1, Using 20 Mm Graded Stone Aggregate As In Floor Surface Finished Fair 30 Mm Thick Below Tiles Complete All As Specified And Directed. . 123 M & L Non-Skid Coloured Ceramic Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over & Including 15Mm Thick Screed In Cm 1:6 Complete All As Specified And Directed. 124 Material And Labour 25Mm Thick Cement Concrete Type B-1, 1:2:4 (12.5 Mm Graded Stone Aggregate) As Floors, Sub-Floors Etc And Finishing Surfaces Of Concrete Topping As Even & Fair Or Even & Rough To Receive The Topping Layer Complete All As Specified And Directed By Engineer-In-Charge. 125 Material And Labour For Double Charge Vitrified Ceramic Tiles ,Stain Free, Having Size Not Less Than 600X300Mm And 8 Mm Thick, Premium (1St Quality) Straight Edge, Colour As Approved By Ge , As In Vertical Surfaces Such As Skirting , Set And Jointed In Neat Cement Slurry And Laid Over And Including 10 Mm Thick Rendering In Cement Mortar 1:4 Complete All As Specified And As Directed By Engineer-In- Charge. 126 Material And Labour Granite (Of Any Type) Work (Table Rubbed And Polished) As In Steps, Pillars,Win Dow-Cills, Cooking Platforms And Like In Laid Over And Including 15 Mm Thick Screed In Cement Mortar (1:4) And Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Marble Shade And Roundening To The Edge Of Stone Slabs On Edges Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 127 Dismantling Stone Slabs And Tiles Of Any Description Or Thickness In Floors, Aprons Etc Laid Dry Or Bedded And Pointed In Any Mortar Complete All As Specified And As Directed By Engineer-In-Charge. 128 Demolition Of Cement Concrete Reinforced Of Any Discription And In Any Position, Including Reinforcement Cut As Required To Facilitate And Including Removing Rubbish Material From Building And Thrown In Low Lying Empty Area (As Per Direcction Of Age/Je) At Any Distance Upto 500 Metres From The Site Complete All As Specified And As Directed By Engineer-In-Charge. Note:The Weight Of Scrap Iron For Schedule Of Credit Shall Be Ascertain By Boo As Ordered By Ge.The Copy Of Boo Duly Countersinged By Ge Shall Be Enclosed With Final Bill. 129 Material And Labour For Reinforced Cement Concrete, Nominal Mix,1:2:4, Type-B1, Using 20 Mm Graded Stone Aggregate As In Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Like Including Proper Compaction By Using Mechanical Viberator Complete All As Specified And Directed. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 130 Supply And Fixing Pvc (Hdpe) Swr, 110 Mm Bore, Single Socketed In Any Length With Rubber Ring Joints Using Solvent As Per Manufacture Instruction, Fixed To Walls Complete All As Specified Including Fixing Of Pipe To Wall With Flat Irons Clamps Of Size 25 X 3 Mm, Bolts, Washers, Nuts, Nails Etc, After Taking Down Existing Damaged Rain Water Pipe Complete All As Specified And Directed 131 Material & Labour For In Repair 75 Mm Dia Pvc (Swr) Floor Trap Type B , Plain With Grating Including Jointing With Solvent Complete All As Specified And Directed By Engineer-In-Charge. 132 Material & Labour For 100 Mm Dia Pvc (Swr) Floor Trap Type B , Plain With Grating Including Jointing With Solvent Complete All As Specified And Directed By Engineer-In-Charge. 133 Material And Labour For Water Proofing Tratment To Roof / Terrace (Material Of Water Proof Treatment As Approved By Ge) Single Component, Acrylic Based, Flexible, Micro Fibre Reinforced Waterproofing And Heat Reflective Coating System. The Treatment Shall Be Carried Out As Per The Manufacturers Instructions And Shall Include The Followings:(A) Preparation Of Substrate And Cleaning It Off All Loose And Triable By Mechanical Means(B) Open The Cracks Lines To Form , V Grooves With Cutter/Hammer/Chisel Up To 5-10Mm And Filling With Crack Filler And Pu Sealant.(C) Application Of Primer Coat @ 0.2 To 0.3 Kg/ Sqm Followed By The First Coat @ 0.75Kg/ Sqm.(D) The Second Coat Shall Be Applied @ 0.75 Kg / Sqm And Reinforced With Fabric Re-Inforcement Between The First And Second Coat.(E) The Top Coat Of Primer Shall Be Applied After The Second Coat Dries Off @ 0.05-0.08 Kg Per Sqm.(F) The Material Shall Adhere To Following Specification. Technical Specification Of Materialtensile Strength 1.5 Mpa Astm D412Elongation At Break > 200% Astm D412Adhesion In Peel > 1.5 Mpa (On Concrete Substrate) En 1542Crack Bridging Ability Passes Upto 3.2Mm Width Astm C1305Permeability To Water Vapour Passes Is 2645Water Vapour Transimission ~ 23 G/M²/24Hr Astm E96Water Absorption 134 Material And Labour For 40Mm Average Thick Pcc Padding In 1:2:4 Type B-1 (Using 20Mm Graded Stone Aggregates) As In Roof Slab Finishing The Surface Even And Fair Using Liquid Water Proofing Compound Complete All As Specified And Directed. Liquid Water Proofing Compound Shall Be Measured And Paid Separetly As Supply Only Under Appropriate Item Of Schedule A Boq. 135 Material And Labour For Making Benching With Pcc 1:2:4 Type- B0, Using 12.5Mm Graded Stone Aggregates Using With Liquid Water Proof Compound As Per ManufacturerS Instruction Along Side Wall Adjoining To Roof In Concave Shape Complete All As Specified And Directed. Note : Liquid Water Proofing Compound Shall Be Measured And Paid Separetly As Supply Only Under Appropriate Item Of Schedule A Boq. 136 Material And Labour For Cement Concrete 1:2:4 , Type B-2 Using 40 Mm Graded Stone Aggregate As In Foundation Filling And Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 137 Material And Labour For Water Proofing Compound Complete All As Specified And Directed. 138 Supply And Laying Dwcpe (Sn 8) Drain Pipes 150 Mm Nominal Dia As Per Is-16098 (Part-Ii), Laid In Trenches On Bed Including All Accessories/ Fittings/ Jointed Ring, Jointing And Testing Complete All As Specified And As Directed By Engineer-In- Charge.Note:- Excavation , Earth Work, Bedding And Pedestal / Anchorage If Required Shall Be Measured And Paid Separately Under Appropriate Item Of Boq/ Sch A 139 Material And Labour For Pcc (1:3:6) Type C-2 Using 40 Mm Graded Stone Aggregates As In Concrete Bed Of Sgsw Drain Pipes Of 150 Mm Bore, Laid To Required Slope Including Packing Under And Haunching Against The Sides Of Pipes After They Are Laid And Tested Complete All As Specified And As Directed By Engineer-In-Charge. Note :- (I) Thickness Of Concrete Bed Below The Barrel Of Pipe Shall Be 10 Cm. (Ii) Width Of Concrete Bed Shall Be Outer Diameter Of Drain Pipes (Not Of Sockets / Collar) Plus 30Cm. 140 Material & Labour For Antitermite Treatment Along The External Wall Below Concrete Or Masonry Apron Using Chemical Emulsion @ 2.25 Litres Per Linear Metre Including Drilling And Plugging Holes Etc. In Apron/Plinth Etc., Complete All As Specified And As Directed By The Engineer-In-Charge. 141 Material And Labour For Att At Points Of Contact Of Wood Work By Chemical Emulsion (In Oil Or Kerosene Based Solution) @ 0.5 Litre/Hole By Drilling 6Mm Dia Holes At A Downward Angle Of 45 Degree At 150Mm Centre To Centre And Sealing The Same Complete All Sepecified And Directed By Engineer-In-Charge. 142 Material And Labour For Att Of Soil Under Existing Floors Using Emulsion @ One Liter Per Hole, 300Mm Apart Including Drilling And Plugging 12Mm Dia Holes With Cement Mortar 1:2 (1 Cement :2 Coarse Sand) To Match The Existing Floors Complete All Sepecified And Directed By Engineer-In-Charge. 143 Material And Labour For Writing Letters Or Figures (Block,Roman, Italic Ot Indian) Of Any Description, Not Exceeding 30Cm High With Paint Complete All Sepecified And Directed By Engineer-In-Charge. 144 Material And Labour For Cutting Into Existing Manholes For Connecting New Drains, Making Good To Pipe And Rendering, Cutting Out Existing Benching For And Forming Branch Channel (1/2 Round Or 3/4 Section) In Cement Concrete 1:2:4 Type B-L Smooth Finished, And Reforming Benching As Required For Internal Dia Of Pipe In 150 Mm Complete All As Specified And As Directed By Engineer-In-Charge. 145 Taking Down Cement Or Cement Lime Plaster On Brick Or Stone Walls, Etc. Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 146 Material And Labour For 15Mm Thick Rendering In Cm (1:6) (Internal Surface) On Other Than Fair Faces Of Brick Work Or Concrete Surfaces And Finishing Even & Smooth But Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. 147 Material And Labour For Factory Made,Machine Pressed Precast Interlocking Paver Block 60 Mm Thick With Grey Cement And No Pigment, Any Shape And Size, Conforming To Is 15658-2006, Made Out Of M-35 Grade Concrete Laid Over Sand Cushioning Complete All As Specified And As Directed By Engineer-In- Charge. Note: The R Sand Cushioning Shall Be Measured And Paid Seperately Under Appropriate Item Of Schedule A Boq. 148 Dismantling Of Brick Tiles Or Terracing Tiles Single Layer On Roof & Disposal Of Retrieved Material Upto A Distance N.Exc 100M Where Directed, Complete All As Specified And Directed By Engineer-In- Charge. 149 Demolition Of Mud In Roofs, Any Thickness, Including Plastering And Leeping (Whether Full Thickness Removed Or Only A Part Thereof Disposal Off Rubbish Upto A Distance Not Exceedomg 500.00Mtr Where Directed ) Complete All As Specified And Directed By Engineer-In- Charge. 150 Material And Labour For 15Mm Thick Screed Bed Or Bedding Layear In Cement Mortar 1:4 On Roof Surfaces, Parapet Or Vertical Beam Surface (Horizontal Or Vertical) Finishing The Surfaces Even And Fair Complete All As Specified And Directed By Engineer-In-Charge. 151 Supply And Fixing Anodised Aluminium Handle, Fabricated Type 150Mm Long Complete All As Specified & Directed By Engineer-In-Charge. 152 Supply And Fixing Aluminium Anodised Barrel Tower Bolt Of Extruded Section, 200Mm Long Complete All As Specified & Directed By Engineer-In-Charge. 153 Supply & Fixing Aluminium Anodised Sliding Door Bolts 300Mm Long, With Hasp And Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed Complete All As Specified & Directed By Engineer-In- Charge. 154 Supply & Fixing Factory Made Steel Window Confirming To Is 1038 With Side Hung Shutters Including Projecting Type Hinges, With Steel Handle, Steel Peg Stay, Complete, Dovetailed Welded, With And Including One Shop Coat Of Zinc Chromate Primer Without Glazing Bars Including Making Good As Per Existing Surfaces Complete All As Specified & As Directed By Engineer-In- Charge.Note: The Rate Of One Shop Coat Of Zinc Chromate Primer Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 155 Supply & Fixing Factory Made Steel Window Confirming To Is 1038 With Side Hung Shutters Including Projecting Type Hinges, With Steel Handle, Steel Peg Stay, Complete, Dovetailed Welded, With And Including One Shop Coat Of Zinc Chromate Primer With Glazing Bars Including Making Good As Per Existing Surfaces Complete All As Specified & As Directed By Engineer-In- Charge.Note: The Rate Of One Shop Coat Of Zinc Chromate Primer Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 156 Supply Only 3.00 Mm Thick Sheet Glass Ordinary Quality ,Fixing With Oil Putty To Wooden Or Steel Surface N.Exc 0.5 Sqm Each Complete All As Specified And Directed 157 Material & Labour For Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cu. M, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25 Cm, In Soft / Loose Soil Complete All As Specified And Directed By Engineer-In- Charge. Complete All As Specified And Directed By Engr-In-Charge. 158 Supply And Fixing For Mild Steel Screw Bolts 5Mm To 10Mm Dia Of Neck (Machine Made) With Hexagonal Or Square Heads At One End And Screwed The Other, Or Screwed Both Ends, Each Screwed End To Be Fitted With Washers And One Hexagonal Or Square Nut, Length Of Bolt Exc 5Cm But N Exc 10Cm Long Complete All As Specified And Directed By Engr-In-Charge. 159 Supply And Fixing For Pre -Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thickness Of Any Colour Having Atensile Strength Of 550 Mpa As In Roof Covering Fixed With L Type Or J Type Or Cranked Hook Bolts All As Specified And Directed By Engineer-In-Charge. 160 Material And Labour For Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle, Channel Or Flat Sections) Including Distance Pieces, Cleats Etc Complete All As Specified And Directed By Engr-In-Charge. 161 Material And Labour For Steel Work In Tubular Post 100Mm Dia Including Special Shaped Washer Etc. Complete Using Erw Or Induction Butt Welded Tubes Conforming To I. S.1161- 1979 Grade St.-240 Including Rolled Mild Steel Joist, Channel, Angle, Or Tee Sections, Fixed Independently, Without Connecting Plates, Etc. (Cut To Ordinary Lengths I.E. Within 20Mm Of The Length Indicated Of Gde Fe 410 -S, Complete All As Specified And Directed By Engr-In-Charge. 162 Supply And Fixing In Repairs Magic Eye For Flush/Panelled Door Shutter Etc Complete All As Specified And As Directed By Engineer-In-Charge. 163 Supply And Fixing Framed Work As In Doors Or Gates Of Angle Or Other Section With Gusset Plates, Rails, Braces, Etc., Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering. Doors, Etc. To Be Prepared For Hanging Or Sliding With And Including Either Hooks And Hinges Or Steel Hanging Door Fittings (Exclusive Of Steel Sheeting Or Other Covering, Running Rails And Guides) Andhanging; Also Fastening And Fixing Complete Complete All As Specified And Directed By Engineer-In -Charge. 164 Material And Labour For Preparation Of New Steel Surfaces Of Any Description Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over With And Including One Coat Of Red Oxide Zinc Chrome Primer Complete All As Specified And As Directed By Engineer-In-Charge. 165 Material And Labour For Preparing Old Steel Surfaces Of Any Description Over 10 Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And As Directed By Engineer-In- Charge. 166 Dismantling Boarding, Any Description, Fixed In Any Position With Nails Complete All As Specified And As Directed By Engineer-In- Charge. 167 Supply & Fixing 18Mm Thick Hdhmr Board Uv Coating, Exterior Grade As Approved By Ge, With And Including Acrylic High Gloss Sheet Of Min 1Mm Thick Over Hdhmr Board, Anti Fungal, Moisture Resistance, Anti Borer, As Per Is 14587 For Frame And Shutter For Kitchen Cabinets / Cupboards (Such As Side Wall, Shutter, Partition Back Side Of Etc. Of Cupboard And Cabinets). Complete All As Specified And Directed By Engg-In-Charge. 168 Supply & Fixing In Repairs Of Stainless Steel Cabinet / Drawers Handle Having A Length Of 250Mm And Shape Complete All As Specified And Directed. 169 Supply & Fixing In Repairs Of Partial Overlay / Fully Overlay Hydraulic Self Closing Concealed Hinges Having Size 103Mm X 64Mm Finish Of Nickel/Silver As Approved By Ge Complete All As Specified And Directed By Engg-In-Charge. 170 M&L For 40Mm Gi Pipe Medium Grade Made To Shape As In Spout Pipe As In Sunken /Verandah/ Balconey Complete All As Specified And As Directed. 171 Supply And Laying Or Fixing Or Laid In Trenches/ Ducts/ Through Pipes/ In Floors / Under Roads/ Hard Standing /Along Poles And Testing Lt Cable Xlpe, Pvc Insulated Screened, Bedded, Galvanised Steel Strip Or Wire Armourd Cable (Heavy Duty) 1100 Volt Grade With Aluminium Conductor Having Cross Sectional Area 70 Sqmm X 3.50 Core Conforming To Is-7098 (Part-I -1988) Complete All As Specified And As Directed By Engineer-In-Charge. (Excavation And Earth Work, Sand Cushioning & Gi Pipe Shall Be Measured And Paid For Separately) 172 Taking Down Carefully Copper /Aluminium Point Wiring (Light, Fan, Socket Or Power Point ) Complete Including Fitting Such As Hylem , Sheet Switches, Ceiling Rose, Pendent Holder , Sockets, Fan Regulator , Bell Push, Electronic Bell , Sunken Box Except Concealed Conduit Etc. Complete All As Specified And Directed By Engineer-In-Charge. Notes:(I) The Weight Of Aluminium Scrap , Copper Scrap And Iron Scrap Shall Be Ascertained By Boo As Ordered By Ge And Same Duly Countersinged By Ge Shall Be Enclosed With Final Bill. (Ii) The Rate Of Cutting Chases (As Required) And Making Good Surfaces To Match With Adjoining Surface Shall Be Measured And Paid Seperately Under Serial Item No. 173.00, 174.00, 175.00, 176.00, 177.00, 178.00, 179.00, 180.00, 181.00, 182.00, 183.00, & 184.00 Of Boq. 173 Material And Labour Point Wiring For One Light / Fan Point Controlled By 6 Amps One Way Modular Switch Switch With 2.5 Sqmm Pvc Insulated, Unsheathed Multi Strand Copper Conductor Cable Fr-Lsh In And Including Concealed Pvc Conduit 20 Mm Dia Heavy Duty Isi Marked, Steel Terminal Sunken Boxes And 3 Mm Thick Phenolic Laminated Sheet Top Cover For Sunken Boxes Flush To Surface For One Light Point/Fan Point, Controlled By One Switch On The Same Board With Other Switch Or Independent Including Cutting, Chasing The Surface And Then Making Good The Same In Cm (1:3) Complete All As Specified And Directed By Engineer-In-Charge. (Note:- Switches, Sockets Etc Shall Be Measured And Paid For Separately Under Items Of Schedule). 174 Material And Labour Point Wiring For One Light / Fan Point Controlled By 6 Amps Two Way Modular Switch Switch With 2.5 Sqmm Pvc Insulated, Unsheathed Multi Strand Copper Conductor Cable Fr-Lsh In And Including Concealed Pvc Conduit 20 Mm Dia Heavy Duty Isi Marked, Steel Terminal Sunken Boxes And 3 Mm Thick Phenolic Laminated Sheet Top Cover For Sunken Boxes Flush To Surface For One Light Point/Fan Point, Controlled By One Switch On The Same Board With Other Switch Or Independent Including Cutting, Chasing The Surface And Then Making Good The Same In Cm (1:3) Complete All As Specified And Directed By Engineer-In-Charge. (Note:- Switches, Sockets Etc Shall Be Measured And Paid For Separately Under Items Of Schedule). 175 All As Per Item No 174.00 Here- In -Before But For One 3/5 Pin, Modular Socket Outlet 6 Amp, On Same Board Complete All As Specified And As Directed By Engineer-In- Charge. 176 All As Per Item No 17400 Here- In -Before But For One 3/5 Pin, Modular Socket Outlet 6 Amp, On Independent Board Complete All As Specified And As Directed By Engineer-In- Charge. 177 All As Per Item No 174.00 Here- In -Before But For One 3/5 Pin, Modular Socket Outlet 5/15 Amp, On Independent Board Complete All As Specified And As Directed By Engineer-In- Charge. 178 All As Per Serial Item No 174.00 Of Boq Here-In-Before But For Modular Bell/Buzzer Point Controlled By One Push Button On Independent Board But Not Below The Switch Board, Complete All As Specified And Directed By Engineer-In-Charge. 179 All As Per Serial Item No 174.00 Of Boq Here-In-Before But For Modular Socket Outlet 3 Pin 6 Amp On Independent Board Complete All As Specified And Directed By Engineer-In-Charge. 180 All As Per Serial Item No 174.00 Of Boq Here-In-Before But For 15/16 Amp Socket Out Let By Using 2.5 Sqmm Pvc Insulated Unsheathed Copper Conductor Cable Fr-Lsh Multi Strand On Independent Board Including Provn 2.5 Sqmm Unsheathed, Multi Stranded Copper Conductor Cable Fr-Lsh Continues As Earth Wire Connected To Earth Dolly Etc Complete In Existing Conduit Complete All As Specified And As Directed By Engineer-In-Charge. 181 Material And Labour For Point Wiring For One Light / Fan Point Controlled By One Switch With 1.5 Sqmm (Nominal Area) Pvc Insulated Unshealthed Multi Stranded Copper Conductor Cable Fr-Lsh In Existing Conduit And Provision Sunken Boxes But Inclyding 3 Mm Thick Phenolic Laminated Sheet Top Cover For Sunken Boxes Flush To Surface For One Light Point/Fan Point Controlled By One Switch And Fan Regulator Including Pvc Insulated Unshealthed 1.5 Sqmm Copper Conductor Cable Fr-Lsh Connected To Common Earth Dolly Complete All As Specified And Directed 182 All As Per Srl Item No 181.00 (Here-In-Before) But Socket 3 Pin 5 Amp 230 Volt Flush Type On Same Board 183 All As Per Srl Item No 181.00 (Here-In-Before) But For One Socket Point Outlet 3 Pin 5 Amp In Incdependent Board 184 All As Per Serial Item No 181.00 Of Boq Here-In-Before But For 15 Amp Socket Out Let By Using 1.5 Sqmm Pvc Insulated Unsheathed Copper Conductor Cable Fr-Lsh Multi Strand On Independent Board Including Provn 2.5 Sqmm Unsheathed, Multi Stranded Copper Conductor Cable Fr-Lsh Continues As Earth Wire Connected To Earth Dolly Etc Complete In Existing Conduit Complete All As Specified And As Directed By Engineer-In-Charge. 185 Supply And Fixing Switch Piano, Flush Type Single Pole, One Way 5 Amp Complete All As Specified 186 Supply And Fixing Switch Piano, Flush Type Single Pole, One Way 15 Amp Complete All As Specified 187 Supply And Fixing Socket Outlet 3 Pin, 5 Amp Flush Type All As Specified 188 Supply And Fixing 2 In 1, 3 Pin, 5 And 15 Amp Flush Type Complete All As Specified 189 Supply And Fixing Modular Switch One Way , 6Amp/10Amp ,1 Module, Single Pole, 250 Volts ,Ac Supply, Isi Marked , Complete All As Specified And Directed By Engineer-In-Charge 190 Supply And Fixing Modular Socket Outlet , 6 Amp-2/3 Pin Combined 2 Module , 230 Volts , Multipurpose, Ac Supply, Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 191 Supply And Fixing Modular Switch One Way 16 Amp, Single Pole, 1 Module 230 Volts , Ac Supply , Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 192 Supply And Fixing Modular Switch Two Way 6 Amp, Single Pole, 1 Module 230 Volts , Ac Supply , Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 193 Supply And Fixing Modular Bell Push Switch 6A 1 Module , Isi Marked Complete All As Specified And Directed By Engineer-In-Charge.Note: (I) Labour Element For Taking Down Old Unservicable Material Is Included In Serial Item No.172.00 Of Boq Here-In -Before And Nothing Shall Be Extra Paid On This Account. 194 Supply And Fixing Modular Socket Outlet 6Amp/16Amp-2/3 Pin Combined,2 Module ,230 Volts ,Multi Purpose, Ac Supply, Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 195 Supply And Fixing Fan Regulator, Modular Type, 5 Step, High Speed, Two Module Complete All As Specified And Directed By Engineer-In-Charge. 196 Supply And Fixing Ceiling Rose 3 Terminal Flush Type 6 Amp 250V ,Isi Marked ,Ac Supply, Topline Series With Polycarbonate 20Mm X 50 Mm Two To Three Terminal, Complete All As Specified And Directed By Engineer-In-Charge. 197 Supply And Fixing Electric / Electronic Bell, Ding Dong Type 230 Volt Ac Supply,Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 198 Supply And Fixing Wall Mounted Extruded Aluminium/Polycarbonate Led Batten Fixture T8(G13 Holder) 1.2 M Including One Led Retrofit Tube 20(±10) Watt. 1.2 M T8 6500 Efficacy Not Less Than 90 Lumen/Watt Extruded Aluminium/Polycarbonate, Pc Diffusor And Inbuilt Driver Complete Including Making Connection Complete All As Specified And Directed 199 Supply And Fixing Lamp Holder ,Isi Marked Of Pvc/Polycarbonate Type With Back Plate Suitable For Batten Fitting With And Including 9Watt Led Retrofit Lamp (Base B-22) Complete All As Specified And Directed By Engineer-In-Charge. 200 Supply And Fixing Lamp Holder Pvc/ Polycarbonate Type With Back Plate Suitable For Batten Fitting With Led Bulb 5 Watt Lamp Base- B-22 Complete All As Specified And As Directed By Engineer-In- Charge.Note: Labour Element For Taking Down Old Unservicable Material Is Included In Serial Item No.172.00 Of Boq Here-In -Before And Nothing Shall Be Extra Paid On This Account. 201 Supply Only Led Bulb 9 W (Suitable For B22 Base), 250V Ac, Green/Red/ Clear Day Light ( Cdl) In Colour Complete All As Specified And Directed By Engineer-In-Charge.As Per Direction Of Engineer-In-Charge Colour Of Led Luminiure Cdl/Warm White Shall Be Provided By The Contractor As Per Site Requirment And Nothing Shall Be Paid Extra On This Account.Notes:(A) Contractor Has To Furnish A Replacement Warranty Of 02 Years For Led Bulb Complete Including Lamp/ Strip From The Certifiy Date Of Completion Of Ca. The Product Will Be Replaced Free Of Cost In The Following Case :-(I) Manufacturing Defects.(Ii) Failure Due To Mechanical And Electrical Impact. (Iii) Drop In Lumen (Or Lux At 1 M) Below 90% Of Clamied Values Of Lumen(Or Lux At 1 M) Of The Led Bulb . (B) All Led Bulbs Must Meet The Provision Laid Down In Is - 16101, 16102 Part -I/Ii,16103 Part -I, 16104,16105,16106, 16108/2012 And 15885 Part -Ii / Section 13. (C) Scope Of Work Shall Include To Fix Led Bulb Walls/Ceiling Which Includes Needful T & P And Required Accessories Etc If Any, Complete Including Making Connection, Testing Etc Complete. No Extra Payment Is Admissible On These Account.(D) Old Unservicable Retrieved Material Shall Be Deposited In The Store Yard Of Age E/M Ge (North) Bathinda By The Contractor His Own Arrangements And Nothing Shall Be Paid Extra On This Account. (E) The Rate Of Electric Connection Connecting With Using Flexible Copper Wire Twin Core Upto Ceiling Rose/Connector Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 202 Supply And Fixing In Replacement Led Panel Light Fitting Recessed Mounted,Square Shaped Of Size 600Mm X 600Mm , 36 (±10%) Watt, Efficacy Not Less Than 100 Lumen/Watt , Extruded Aluminium/Polycarbonate, Pc Diffusor And Inbuilt Driver Complete As Per ManufacturerS Instructions With And Including Connection With Flexible Twin Core Copper Cable Of Size 23/.00076 From Ceiling Rose To Fitting Complete All As Specified And As Directed By Engineer-In- Charge. 203 Material And Labour In Replacement Sub Main Wiring Complete With Two Single Core 6 Sqmm,1100 Volts Grade, Pvc Insulated, Multi Stranded Copper Conductor Cable Frlsh With And Including Single Core 6 Sqmm,1100 Volts Grade, Pvc Insulated, Multi Stranded Copper Conductor Cable Frlsh For Earth Wire In Existing Pvc Concealed Conduit (Colour Code Phase-Red, Neutral-Black And Earth As Green) Complete All As Specified And Directed By Engineer-In-Charge. Notes:-(A) Three Single Core 6 Sqmm Frlsh Pvc Insulated Unsheathed With Multistranded Copper Conductor Cable 1100 Volts Grade Shall Be Measured As One Length. 204 Supply And Fixing In Replacement Mcb 40Amp -63 Amp Spn ,240Volt , Rupturing Capacity 10 Ka , Curve ‘C’ Isi Marked, Complete All As Specified And Directed By Engineer-In-Charge. 205 Supply And Fixing In Replacement Mcb 6Amp -32 Amp Sp ,240Volt , Rupturing Capacity 10 Ka , Curve ‘C’ Isi Marked, Complete All As Specified And Directed By Engineer-In-Charge. 206 Supply And Fixing In Replacement Mcb 32 Amp Spn ,240Volt , Rupturing Capacity 10 Ka , Curve ‘C’ Isi Marked, Complete All As Specified And Directed By Engineer-In-Charge. 207 Supply And Fixing In Replacement Sheet Metal Enclousers Made Out Of Crca Mild Steel Sheet Not Less Than 1.2Mm Thick,, Double Door, Powder Coated Db Spn 8 Way 240 Volt, Ip -54, 200 Amps Rated Bus Bar, Dust And Vermin Proof Suitable For Incorporation Of McbS And Isolators Etc Complete All As Specified And As Directed By Engineer-In- Charge.Note: Mcb/ Isolators Shall Be Measured And Paid Seperately Under Appropriate Item Of Boq. 208 Supply And Fixing Sheet Metal Enclousers Made Out Of Crca Mild Steel Sheet Not Less Than 1.2Mm Thick,, Double Door, Powder Coated Db Spn 12 Way 240 Volt, 200 Amps Rated Copper Bus Bar, Dust And Vermin Proof Suitable For Incorporation Of McbS And Isolators Etc Complete Complete All As Specified And As Directed By Engineer-In- Charge.Note: Mcb/ Isolators Shall Be Measured And Paid Seperately Under Appropriate Item Of Boq. 209 Supply And Fixing In Replacement Sheet Metal Enclousers Made Out Of Crca Mild Steel Sheet Not Less Than 1.2Mm Thick,, Ip-54 Protection, Flush Mounted For Metal Door, Powder Coated Db Tpn 4 Way, 415 V Ac With 63 Amps Rated Bus Bar, Double Door, Dust And Vermin Proof Suitable For Incorporation Of Incoming Mccb And Outgoing Mcb Sp/Tp And Earth & Neutral Bus Bar Etc Complete All As Specified And As Directed By Engineer-In- Charge.Note: Mcb/ Isolators Shall Be Measured And Paid Seperately Under Appropriate Item Of Boq. 210 Supply And Fixing Wall Mounted Extrdued Aluminium Housing Led Betten Fixture With Tube 1.2 M, 20 Watt Inverter Type, 1.2 M 3000/6500K, Efficacy Not Less Than 90 Lumen/Watt, Extruded Aluminium/Polycarbonate, Pc Diffusor And Integrated Inbuilt Driver Complete Including Making Connection Complete All As Specified And As Directed By Engineer-In- Charge. 211 Supply And Fixing Wall Mounted Extrdued Aluminium Housing Led Betten Fixture With Tube 1.2 M, 25 Watt Inverter Type, 1.2 M 3000/6500K, Efficacy Not Less Than 90 Lumen/Watt, Extruded Aluminium/Polycarbonate, Pc Diffusor And Integrated Inbuilt Driver Complete Including Making Connection Complete All As Specified And As Directed By Engineer-In- Charge. 212 Supply And Fixing Led Batten Fitting 1X10 Watt, 6500K, 2 Ft Complete With Decorative Ultra Slim Square Profile Led Lighting Fixture With Extruded Polycarbonate Environment Friendly, Energy Efficient Complete With All Light Connection All As Specified And Directed 213 Supply And Fixing In Repair Led Street Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminium Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Complete With Ip 65/66 Protection Including Fixing With Gi/Ms Bracket Made Out Of Suitable Size Of Light Grade Tube Upto 1.2 Mtr Length Bent To Shape With 02 Sets Of Ms Clamps Made Out Of Minimum 3 Mm Ms Flat Iron With Iron With Suitable Bolt And Nuts Complete With Making Connection Complete All As Specified And Directed 214 Supply & Fixing Building Security Led Light Of 35 Watt , Ip 66 , Luminaire With High Power With Toughened Glass Complete As Per ManufacturerS Instructions With And Including Bracket Made Out With 40Mm Bore Galvanised Iron Light Grade Pipe 1.20 Mtr Length Bent To Shape With 02 Sets Of Ms Clamps Made Out Of Minimum 3 Mm Ms Flat Iron With Suitable Bolt ,Nuts And Washers Complete And Fixing To Wall / Column With And Including Electrical Connection With 1.5 Mtr Long Twin Core Round Copper Conductor Cable Of Suitable Size And Testing Complete All As Specified And Directed By Engineer-In-Charge. Notes:(A) The Rate Of Bracket Made Out With 40Mm Bore Galvanised Iron Light Grade Pipe 1.20 Mtr Length Bent To Shape With 02 Sets Of Ms Clamps Made Out Of Minimum 3 Mm Ms Flat Iron With Suitable Bolt And Nuts And Electrical Connection With 1.5 Mtr Long Twin Core Round Copper Conductor Cable Of Suitable Size Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (B) Contractor Has To Furnish A Replacement Warranty Of 02 Years For Security Led Light Fittings Complete Including Lamps From The Certifiy Date Of Completion Of Ca. The Product Will Be Replaced Free Of Cost In The Following Case :-(I) Manufacturing Defects.(Ii) Failure Due To Mechanical And Electrical Impact. (Iii) Drop In Lumen (Or Lux At 1 M) Below 90% Of Clamied Values Of Lumen(Or Lux At 1 M) Of The Led /Luminaries. (C) All Security Led Light Must Meet The Provision Laid Down In Is - 16101, 16102 Part -I/Ii,16103 Part -I, 16104,16105,16106, 16108/2012 And 15885 Part -Ii / Section 13. (D) Scope Of Work Shall Include To Fix Security Led Light Fittings Walls/Building Which Includes Needful T & P And Required Accessories Etc If Any, Complete Including Making Connection, Testing Etc Complete. No Extra Payment Is Admissible On These Account. 215 Supply And Fixing Jointing Of Double Walled Corrugated Pipe (Dwc) As Ug Cable Protection Complete Of Size 63 Mm, Complete All As Specified And Directed By Engineer-In-Charge 216 Supply And Fixing Jointing Of Snap Fit Coupler For Double Walled Corrugated Pipe (Dwc) Of Ug Cable Protection Complete Of Size 63 Mm, Complete All As Specified And Directed By Engineer-In-Charge 217 Supply And Fixing Mccb With Adjustable Type, 4 Pole, 63 Amps, 415 Volts, 50 Hz, 25 Ka And Including Sheet Metal Enclosure Out Door Type Made Out Of 3.15 Mm Thick Crca Sheet Mounted On Angle Iron Padesta Including Grouting Complete All As Specified And Directed By Engineer-In-Charge. 218 Material And Labour For Earthing Complete With Galvanised Steel Earth Plate Electrode 600Mm X 600Mm X 6 Mm Thick Burried Directly In Ground To Depth Of Pit Not Less Than 2.25 M Below Normal Ground Level With Top Edge Of The Plate Not Less Than 1.5 M Below Normal Ground Level Surrounded From All Sides By 15 Cm Thick Packed Layer Of Charcoal / Coal Dust And Common Salt Filling In Alternate Layers And Connected To Galvanised Earth Lead Wire 4 Mm Dia By Means Of Bolts, Nuts, Check Nuts And Washers Of Gi Or Steel Including Gi Protection Pipe 15Mm Dia Light Grade Upto The Extent Of 7.5 Metre And Connecting To Earthing Test Point, Main Switch Board Including Gi Pipe 20 Mm Dia Light Grade For Watering, Ms Funnel And Bringing Out The Watering Pipe Upto 30 Cm Above The Normal Ground Level Plugged At Top Including All Fitting Including Pcc Earth Pit With Pcc 1:2:4 Type B-1 Using 20Mm Graded Stone Aggregate And Rcc Pit Cover Including Necessary Earthwork And Excavation In Any Type Of Soil Complete All As Specified As Shown In Electrical Plate No 3 Of Ssr Part-I And Testing On Completion. Note:- (I) Earth Continuity Of Gi Wire 4 Mm Including Protection Pipe Up To 7.5 Mtrs From Earth Electrode Will Be Included In Unit Rate, Complete All As Specified And Directed. (Ii) The Rate Of Earth Work In Soft/Loose Soil I.E. Excavation, Returing Filling And Removal, Form Work Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (Iii) Pcc Chamber Shall Be Constructed At Least 1.5 Metre Away From The Earth Electrode And Pipe For Watering Shall Be Provided In Slanting Manner. (Iv) The Earth Testing Arrangement Should Be Done By The Contractor As Per Direction Of Engineer-In-Charge. 219 Supply And Fixing 1100 Volts Grade Heavy Duty Cable Pvc Insulated Aluminium Strandred Conductor 6Sqmm, Served With Inner Sheathing Of Pvc Tape And Overall Pvc Sheathed In Service Connections Suspended By Insulating Hangers Not More Than 1 Mtr Apart Including 4Mm Suspenstion Wire, One Twin Core Cable Flat All As Specified And Directed 220 Supply And Fixing In Replacement Exhaust Fan 300Mm Sweep (Heavy Duty) Steel Body, Bee, 5 Star Rated ,Ac Supply, Single Phase ,230 Volts, 50Hz,1200Rpm With And Including Frame Including New Mosquito Stainless Steel Wire Mesh Of Guage 0.36Mm With Suitable Wooden Frame Protection Against Birds Etc. Mounted In Suitable Opening Arrangmement In Wall And Electric Connection With And Including Three Core Pvc Insulated Pvc Sheathed Copper Conductor Flexible Cable 24/0.2Mm Drawn In Flexible Pvc Conduit And Hanging On Wall With 04 Nos. Steel Fastners 10Mm Dia 100Mm Long With And Including Serial Number Of Fan As Issued By Engineer-In-Charge And Ge Office Name With Red Colour Permaent Marker Complete All As Specified And Directed By Engineer-In-Charge. 221 Supply And Fixing Exhaust Fan 250Mm Sweep (Heavy Duty) Steel Body, Bee, 5 Star Rated ,Ac Supply, Single Phase ,230 Volts, 50Hz,1200Rpm With And Including Frame Including New Mosquito Stainless Steel Wire Mesh Of Guage 0.36Mm With Suitable Wooden Frame Protection Against Birds Etc. Mounted In Suitable Opening Arrangmement In Wall And Electric Connection With And Including Three Core Pvc Insulated Pvc Sheathed Copper Conductor Flexible Cable 24/0.2Mm Drawn In Flexible Pvc Conduit And Hanging On Wall With 04 Nos. Steel Fastners 10Mm Dia 100Mm Long With And Including Serial Number Of Fan As Issued By Engineer-In-Charge And Ge Office Name With Red Colour Permaent Marker Complete All As Specified And Directed By Engineer-In-Charge. 222 Taking Down Unserviceable Complete Ceiling Fan Along With Blades And Deposited To Age E/M Store Yard Of Ge (South Bathinda) Complete All As Specified And Directed By Engr-In- Charge. 223 Supply & Fixing Ceiling Fan Of 1200Mm Sweep Complete With Blades, Down Rods, With And Including Remote Control, Single Phase, 50 Hz, Min Air Delivery 210 Cfm With Service Value 6.00 Bee. Five Star Rated With Brushless Direct Current (Bldc) Motor Connecting Up Complete With And Including Three Core Flexible Pvc Insulated Multi Stranded Copper Conductor Cable Of Suitable Size From Ceiling Rose / Connector, Including Extra Gi / Ms Pipe Down Rod, As Per Site Requirement , With And Including Serial Number Of Fan As Issued By Engineer-In-Charge And Ge Office Name With Red Colour Permaent Marker Complete All As Specified And Directed By Engineer-In-Charge. 224 Dismantling And Taking Down Of Existing Energy Meter And Refixing The Same Complete All As Specified And Directed By Engineer-In- Charge, 225 Dismantling And Taking Down Existing Geyser And Deposit In The Safe Custody / Store Yard Of Age E/M Of Ge (S) Bathinda And Refixing The Same After Carring Out Repair Work/ Rewiring Accn )Complete All As Specified And Directed By Engineer-In- Charge,
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
Punjab View Result →
5.
Housing Urban and Rular Development #11162283 AOC
Providing the manpower for electrical preventive and breakdown maintenance Day to day operation & maintenance of entire electrical installations including Sub-Station, compound lighting, DG operation, dusting and cleaning of fire detection sensors and others parts, operationof liftsetc at the Technician Studio, Kolkata-700033for the period of 12 months.- 1 Day to day operation & maintenance of entire electrical installations including Sub-Station, compound lighting, DG operation, dusting and cleaning of fire detection sensors and others parts, operationof liftsetc at the Technician Studio, Kolkata-700033 2 Skill Electrician: 03 Nos per day 3 Semi-Skill Electrician: 03 Nos per day 4 Un-Skill Electrician: 02 Nos. per day 5 Semi-Skill (Lift Operatror cum Attendent): 02 Nos. per day 6 SCOPE OF WORK:-1. The Scope of maintenance of electrical installation includes Routine, Preventive and Corrective Maintenance of L.T. Distribution lines to each floor of all the buildings/ blocks, entire wirings, BDB, PDB, VTPN, LT panels, Feeder Pillar Box, power & distribution cables, fittings & fixtures, Switch Boards, Power and Computer Points, Power outlet of all sorts of Air-conditioning Systems,resetting/ Switching off of Fire detection system during normal operation/ malfunctioning etc., Operation, configuration & repair / replacement of Timers for AC / Compound light, Compound Lighting including high mast, all glow sign and metal sign boards in the campus, Electrical Installations/ distribution up to Switch Board/ Panel of Lift Machine Room & Pump Room and / or Kiosk of Pump for Water Supply system, in the premises of above mentioned site. 7 2. Cleaning & checking of all the fittings & fixtures, Panels, TPN & SPN DBs, SFUs & other Electrical Installations, as well as the Compound Light installations in a regular interval to keep them in a tip-top condition at the cost of the agency and the same must be recorded in log book.3. The checking & repairing of the different types of light fittings, ceiling fans, exhaust fans etc. has to be done by the agency at his own cost (except rewinding of ceiling fans and exhaust fans) including dismantling and re-fixing of the same. (Major materials to be supplied by department). Especially, all the ceiling fans of entire worksite are to be inspected, at least once in 3(three) Months, in respect of Split Pin, Jam nut etc. to prevent unwanted falling of Ceiling Fans, failing which responsibility will be fixed up upon the agency. Split Pin, once taken out from the installation should not be re-used under any circumstances. Required number of Split Pin and Jam nut should be provided by the agency at their own cost. Building wise Fan register should be maintained as per Performa provided by the department, wherein each and every details of checking, replacement of spares, repairing etc. should be recorded against individual fan and every record should be signed by the attending Electrician / responsible person of the agency, duly countersigned by the concerned J.E. and A.E. 8 4. Measuring of various electrical parameters e.g. Current, Voltage, Temperature of different L.T. panel board, BDBs, Main switches etc., test of Insulation Resistance, Earth Resistance etc. are to be carried out every month and test results are to be recorded in Log book (preventive maintenance). Thermal Imaging Scanner should be used for measuring temperature of electrical equipment regularly to find out any abnormalities and printout of thermal image with date and time stamp should be provided to the concerned J.E. and A.E. In case, any abnormal reading is noticed, the same should be rectified/set right immediately by taking prompt, appropriate & effective measures/actions in consultation with concerned AE&JE. Thermal image should also be taken after rectification. The engaged agency will supervision overall maintenance works and examine Logbooks for any abnormality and sign the Logbook accordingly5. Switching On/Off of the common service lighting e.g. compound, corridors, staircases etc. and AC machines, Light, Fan etc in closed room like Library, Store, OPD, OT or these are not run beyond Office hours or off day will be the responsibility of the agency. 6.Cleaning of Sub-station rooms,LT Panel rooms,operation of HT switch gear & resetting the protective rekeys in case of any fault occurred will be the responsoibilty by the agency . 9 7. Operation of DG sets & checking and maintenance of AMF panel, Checking of Battery, checking of fuel level of DG Set, Lubricating oil etc, carrying & pouring of Fuel if necessary and maintaining separate log book for DG Set as per given Proforma. For Operation of DG Sets, experienced and skilled operator should be provided8.Llift operation cum attendent including regular cleaning of lifts etc as per direction of EIC.9. Regular dusting and cleaning of fire detection sensors and others parts including reset of fire alarms. 10 TERMS & CONDITIONS:-1. The agency has to depute manpower as directed by the EIC carrying out the maintenance work smoothly with due regard to the safety.Category of Staff:- i) Skilled Electrician --03 (Three) Nos per day ii) Semi-Skill Electrician--03(Three) Nos. per day iii) Un-Skill Electrician: 02 Nos. per dayiv) Semi-Skill (Lift Operatror cum Attendent): 02 Nos per day 11 2. The Maintenance Personnel, deputed by the agency havingvalid Voter Identity/ Adhaar Card and should possess valid Workman Permit/ License, as mentioned below, issued by Directorate of Electricity, Govt. of West Bengal.Category of Maintenance Personnel Mandatory Requirementa. Skilled Electrician Having Electrical/ Workman Permit i(b), ii & iv issued by Directorate of Electricity, West Bengal.b. Semi-Skilled Electrician Workman Permit i(b) and (ii) issued by Directorate of Electricity, West Bengal.c. Un-skilled Personnel/ Helper Basic knowledge of Electrical works.Also the Superviser of the company should have valid SCC Parts 1,2,3,4,5,6A,7A,7B ,9,11,12. 12 3. Agency must have to submit mandatorily the list of staff mentioning their Name, contact Mobile No., category, along with photo copy Valid Workman Permit, proper identity and address proof etc, in writing to the concerned JE & AE before commencing the work. All the photocopy should be attested and authenticated by the Agency.4) The agency will issue a photo Identity Card, duly signed by the agency and countersigned by the concerned JE / AE to all the Maintenance Staffs deployed including substitutes.They should always carry the said Photo Identity Card while on duty. The agency should also submit one copy of the said Identity Cards to the JE.5) The agency will maintain shift wise attendance register at call center to record the attendance of the staffs on duty which will be authenticated/ verified by the concerned Junior Engineer/ Officer- in-charge. 13 6) The agency shall have to prepare a Duty Roster of the Maintenance Staffs at the beginning of every month, or as directed from time to time. A copy of the said Duty Roster, duly signed by all staffs, should be submitted to the concerned JE and one copy should be available at the call centre.7)The agency will have to provide proper uniform for his maintenance staff at his own cost and clour of the dress will be decided by the EIC. No staff will be allowed for performing duty without proper uniform. 8) The agency, and all the electricians deputed at worksite must have Mobile Nos. and the same should be intimated to the E.I.C., A.E. & J.E concerned, in writing. The telephone call should be responded without delay. 14 9) The agency has to provide one GPS activated smart phone dedicated for call center. The cost of the handset and running cost i.e. phone bills have to be borne by the agency. No claim of payment against any telephone bill will be entertained by this department.10) The agency should have a close watch on the attendance of the Maintenance Staffs. In case of absence of any Maintenance Staffs, the agency shall have to arrange for suitable alternative within an Hour, failing which, the charges for that day will be deducted from the bill of the agency on pro-rata basis.The Executive Engineer,Electrical Constrution Division ,P.W.D. reserves the right to terminate the contract in case of absence of Maintenance Staffs for more than three consecutive days, without showing further reason. 15 11) In case of any Accident and or physical illness of the staffs of the agency, while on duty, no claim will be entertained by this department and all responsibilities thereof should be shouldered by the agency only. Minimum wages as per existing Labor Act should be paid to the Electrician(s) and Helper(s)12) The agency shall have to provide 500V Megger, Digital Multi meter, Earth tester and all other requisite tools and tackles sufficient for checking, testing and recording of health of all electrical installations. Other tools & tackles e.g. Crimping Machine, Line Tester, Screw Driver, Pliers, Stripper, Sockets of some common sizes etc. should also be available at site, in sufficient quantities, free of cost, under disposal of their maintenance staff.Deployed employee by the agency should have sufficient knowledge to operate The Thermal imaging Scanner or to be used by the direction of Assistant Engineer/ Junior Engineer.13) The space for sitting accommodation for the staffs of the agency inside worksite premises will be provided by the competent authority. 16 14) All the maintenance staff of the contractor should have proper & constant vigilance and check that, there is no sign of heating-up, burning smell, discoloration or sparking at any of BDBs, panel boards, rising main etc. due to overloading or loose termination. Care should be taken to check any highly unbalance in loading at any point.15) In case of power failure or development of any unfavorable situation the agency will have to communicate with the concerned Power Supply Company authority and extend help or cooperation to said authority in restoration of power supply. Meanwhile the agency will have to operate the switching mechanisms of interconnections among available sources at suitable locations to maintain power supplies at important locations by monitoring and/ or restricting electrical loads in consultation with the concerned Junior Engineers & Assistant Engineer.16) Routine checking and preventive maintenance and breakdown maintenanceof the electrical installations has to be carried out by the agency maintaining a register under signature of respective Junior Engineer and Assistant Engineer with a view to ensure uninterrupted power supply within worksite campus. 17 17) Materials required as replacement during maintenance of electrical installations e.g. Lamps, SFUs, SPNDB, TPNDB, Cables etc. will be supplied by the Department for which requisition of Materials, signed by the authorized representative of the agency, should be submitted to the concerned JE (Electrical) well in advance. A separate material stock register should be maintained by the agency where entries related to Issue, Consumption & present stock position of Materials should be made. However auxiliary items like fuse wires, screws, nuts, bolts, washers, insulating tape, Split pins of Ceiling Fans, dusters etc. will have to be supplied by the agency at his/ their own expense.18) The agency shall have to deposit all dismantled unserviceable materials such as fused lamps, defective condensers, starters, and timers, MCBs etc. to the concerned Section Office or any other locations within worksite premises by the agency by its own laborers / arrangements / tools and tackles as per the direction of the Assistant Engineer/ JE concerned. Fresh materials will be issued against respective defective materials. No materials should be taken out of the maintenance site without the permission and necessary challan of the site-in-charge/JE 18 19) Any major shut down or fault should be brought to the notice of JE/AE immediately in writing and over telephone for further course of action. The agency will also have to attend emergency calls immediately at the site with staff, tools etc. on demand. 19 20) In case of any breakdown caused by cable fault etc., if situation demands the agency will have to restore the power supply temporarily either with the materials available with this department or arranging the same temporarily and safely at his own cost till completion of original restoration work.21) Building wise Log book is to be maintained for Preventive Maintenance & Cleaning and Corrective Maintenance of Electrical equipment except Fan as per direction of E.I.C. Separate Building wise Register is to be maintained for Ceiling Fans. The daily record of the Log book is to be signed by the responsible person and verified & signed by concerned JE & AE and photocopy of the same should be sent to the Executive Engineer concerned through proper channel at the time of submission of bills. The Logbooks should be available at Call center and should be produced on demand. 20 21) The agency should be responsible for any damage in the installation due to mishandling or mal- operation by its staff and shall be liable for rectification / replacement, as the case may be, of the damaged installation/ equipment within time frame to be fixed by concerned A.E., failing which the said rectification/ replacement of affected equipment/ installation would be executed by external agency and the cost thereof would be recovered from the bill and the accused staff should be replaced immediately.22) Bills should be submitted quarterly with the certification of satisfactory performance of the concerned JE and AE. Photocopy of Logbook and Attendance Register should also accompany the Bill. Payment should be made as per PWD norms. 21 23) Any fault of electrical installations starting from LT supply end (except the installations of Power Supply Company) to light, fan, call bell, plug points etc. i.e. LT cables and all sub-panels, distribution boards, main switches, earthing attachments, compound lights etc. has to be detected, attended and restored by the agency by its own man power with the help of the materials(cables, main switches, DBs, wires, HRC fuses etc.) available from this department or as per the terms & conditions of this contract. 24) If any kind of incapability & negligence are noticed in observing all the above-said terms & conditions causing inconveniences to public service, is subject to unilateral penalty, be it detected on the spot or thereafter (even after payment). This Department also reserves the right to deduct the cost from the bills of the contractor on pro-rate basis as determined by the Engineer –In-Charge for any shortfall in observing above T&C. In that case, the above- said contract may be terminated without issuing any notice and Stringent & punishable action may be taken against the contractor. 22 25) The technitian of the agency should capable of Casing -caping /rigid conduit wiring to overcome the emergent situation .25) The contract may be terminated with one months’ notice on either side (both agency and tender awarding authority) . 26) At the time of Bill submission must submit payment acquaintance of staff wages ,ESI & PF in which signature of each staff with revenue stamp is necessary .27) Any upcoming / Ongoing project, which will be completed within stipulated period of Maintenance contract, automatically will come under maintenance contract .28) All the log-books should be available at the call center and to be produced to the Office of the AE/ JE on demand. 29) This Maintenance contract covers all the buildings, blocks, outdoor electrical gadgets within the premises ofTechnician Studio, Kolkata-700033 23 TERMS & CONDITIONS FOR OPERATION OF LIFTS:- 24 1. The agency has to depute manpower as directed by the EIC carrying out the lift operation smoothly with due regard to the safety.Category of Staff:- Semi-Skill (Lift Operatror cum Attendent): 02 Nos. 25 2. Day to day Attendent -cum -operation of passenger lift foras directed by the EIC.3. The lift operator/attendant should have a sound knowledge with valid lift operator license issued by the Licensing Board, Govt. of West Bengal.4. The operator/attendant should be obliging dutiful and polite to all while on duty. In case any irregularities of duty or complain against the operator/attendant if noticed, would be withdrawn forthwith and shall be replaced by new operator.5. The report is to be submitted periodically about the working of lift incl. all safety devices and Governor to the concerned JE/AE. 26 6. Agency must have to produce the list of the staff mentioning their Name, contact Mobile No.in writing with proper identity and address proof & their Valid lift operator license issued by the Licensing Board, Govt. of West Bengal along with photo copy to the concerned JE & AE before commencing the work. This should be treated as mandatory.7. The agency will have to provide proper dress for his staff and color of the dress will be decided by this department. No staff will be allowed for performing duty without proper dress.8. The agency will issue a photo Identity Card, duly signed by the agency and countersigned by the concerned JE / AE to all the operation Staffs deployed including substitutes. They should always carry the said Photo Identity Card while on duty. The agency should also submit one copy of the said Identity Cards to the JE 27 9. The agency shall have to prepare a Duty Roster of the operation Staff at the beginning of every month, or as directed from time to time. A copy of the said Duty Roster, duly signed by all staffs, should be submitted to the concerned JE.10. The agency must have separate contact telephone numbers with Mobile Nos. for his office and Supervisor deputed at worksite so that the agency may be communicated in case of any urgency and the same should be intimated to the E.I.C., A.E. & J.E concerned, in writing. The telephone call should be responded without delay.11. The lift enclosure to be kept clean (not sweepers works) regularly by the operator 28 12. The operational work of the lift is to be supervised directly under the supervision of technical staff of the contractors under the direct control of JE/AE concerned. The contractor shall be responsible for any damage to the lift due to mishandling; loss will be recovered from the contractors bill as per direction of EIC.13. The Log Book recording regarding functioning and breakdown of the lift is to be maintained at site by the contractor under supervisions of JE concerned. If any kind of trouble arises, it should be brought to the notice of JE, AE concerned immediately. The JE/AE would put their signature on log book making note on performance. 29 14. In case of any absence of operator, the lift is to be made operative within 2 hours by placing the new operator. In case of absence prorate deduction will be made from the contractors bill and the contract may be terminated if it exceeds 3 (three) days. In this respect Executive Engineer’s decision will be final.15. This department would not be held responsibility for any accident of the liftman on duty for any reasons. The contractor or their lift operators on duty would not claim any compensation in any shape from this department for such accident. 30 16. The Executive Engineer,Electrical ConstructionDivision, P.W.Dte. would have sole authority to cancel the contract without assigning any reason with a notice of one month only.17. Any conditional quotation offered would not be accepted.18. Any quotation offered with price variation clause would not be accepted.19. The payment will be made monthly/quarterly on submission of bill in triplicate by the agency with satisfactory report regarding performance by the concerned JE/AE. Copy of log book has to be enclosed with the bill. 31 20. Persons entrusted by the agency for operation of lift should wear photo Identity Card during duty hours.21. Documentary evidence in support of payment of minimum wages as per Labour Act to be produced to the Principal Employer i.e. Executive Engineer, Electrical Construction Division, P.W.Dte. in-charge of works.22. Rescue operation is in the scope of agency in case of exigency arises out of lifts getting stopped in between landing floors with passengers inside cage.23. No claim towards cost of uniform, PPE e.g. Hand Gloves, Mask, Goggles, protective body- ware etc. for the maintenance staffs should be entertained by this department. However, if any such equipment/ dress is available from the Hospital Authority for their statutory requirement, the same would be provided. BUT IN NO CASE IT SHOULD BE ENTERTAINED AS MANDATORY CLAIM.24.At the time of Bill submission must submit payment acquaintance of staff wages ,ESI & PF in which signature of each staff with revenue stamp is necessary .
Contract Date: Mar 09, 2026 Contract Value : ₹ 14.46 Lakh
Government Departments No of Bidders 4
West Bengal View Result →
6.
Communications and Information Technology  #11104520 AOC
Tender For supply installation testing and commissioning Of It Infrastructural Items, Cctv Surveillance System, Epabx And Voice N/W, Audio Visual Solution For The Conference And Training Room At Igr Office, In The Stp-Ii.- 1 Description 2 SITC of IP 4MP IR Bullet Camera (complete with Centralised VMS perpetual license) with Motorized Varifocal lens having minimum technical specification: Image Sensor: 1/2.8” Progressive Scan CMOS; Min. Illumination: Color: 0.01 lux @(F1.2-1.7, AGC ON), 0.01 lux @(F1.2-1.7, AGC ON), 0 lux with IR; Shutter Speed: 1/3 s to 1/100,000 s; Day & Night: IR Cut Filter; 3-Axis Adjustment Pan; Digital Noise Reduction: 3D DNR; WDR: 120dB; Focal length: 2.7 to 13.5 mm; View Angle: Horizontal FOV: 90°, Vertical FOV: 60°; Aperture: F1.2 to F1.7 with Auto focus; Lens Mount: Ø14; IR Range: 50 m or higher; Video Compression Main stream: 3-Line, H.265+/H.265/H.264+/H.264/MJPEG; Video Bit Rate: 128 Kbps to 8 Mbps; Operating Conditions Temperature: -30 °C to +60 °C; Power Supply: 12 VDC, PoE (802.3af); Material: Metal; Protection Level: IP66, IK10, Lightning Protection, Surge Protection and Voltage Transient Protection. REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Centralised VMS Software License & pole Mounting Bracket for Camera (if required as per site). Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 3 SITC of IP 4MP IR Dome Camera (complete with Centralised VMS perpetual license) with Motorized Varifocal lens having minimum technical specification: Image Sensor: 1/2.8” Progressive Scan CMOS; Min. Illumination: Color: 0.01 lux @(F1.2-1.7, AGC ON), 0.01 lux @(F1.2-1.7, AGC ON), 0 lux with IR; Shutter Speed: 1/3 s to 1/100,000 s; Day & Night: IR Cut Filter; 3-Axis Adjustment Pan; Digital Noise Reduction: 3D DNR; WDR: 120dB; Focal length: 2.7 to 13.5 mm; View Angle: Horizontal FOV: 90°, Vertical FOV: 60°; Aperture: F1.2 to F1.7 with Auto focus; Lens Mount: Ø14; IR Range: 50 m or higher; Video Compression Main stream: 3-Line, H.265+/H.265/H.264+/H.264 /MJPEG; Video Bit Rate: 128 Kbps to 8 Mbps; Operating Conditions Temperature: -30 °C to +60 °C; Power Supply: 12 VDC, PoE (802.3af); Material: Metal; Protection Level: IP66, IK10, Lightning Protection, Surge Protection and Voltage Transient Protection. REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Centralised VMS Software License & pole Mounting Bracket for Camera (if required as per site).Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 4 SITC of 16 Channel IP 4K NVR having minimum technical specification: Video Input: 32 Channel IP Fully Featured NVR; Audio Iuput/Output: 1 Channel Input/2 Channel Outputs, RCA; Display Interface: 2 HDMI (1 HDMI up to 3840 × 2160); 2 VGA; Display Split: 1/4/8/9/16/25/36/64; OSD: Camera title; Time; Video loss; Camera lock; Motion detection; Recording; Compression: H.265/H.264/MJPEG/MPEG4; Resolution: 12 MP (4000 × 3000); 8 MP (3840 × 2160); 6 MP (3072 × 2048); 5 MP (2560 × 1920); 4 MP (2560 × 1440); 3 MP (2048 × 1520); 1080p (1920 × 1080); 720p (1280 × 720); D1 (704 × 576 / 704 × 480); CIF (352 × 288 / 352 × 240); Frame Rate: 1–15 fps (12 MP and 8 MP); 1–25/30 fps (rest of the resolutions); Record Bit Rate: 256Mbps or 200Mbps(when RAID is enabled); Bit Rate: 16 kbps ~ 20 Mbps, per channel; Network Throughput: Input 256Mbps or 200Mbps (when RAID is enabled); Output 256Mbps or 200Mbps (when RAID is enabled); Cascading: Built-in CMS to Monitor and Manage Multiple Matrix NVRs; ONVIF and Major Camera Brands Support; Usb Port: 4; RS232: 1 port (for PC communications and keyboard). Temperature: -10 ºC ~ +55 ºC; REGULATORY: CE, FCC, UL, ONVIF, BIS; Including Wireless Bluetooth Multi Device Keyboard and Mouse. Centralised VMS perpetual license.Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 5 SITC of Non-Touch Commercial LED UHD Display (Indoor Type) having minimum technical specification Size (diagonally): 55-inch or higher; Effective Display Area (W x H): as per OEM; Panel Technology: Vertical Alignment, Type: IPS Panel/D- LED/Edge LED, Resolution: 3840 x 2160 pixels @ 50 Hz or higher, Aspect Ratio: 16:9, Colors: 2 Million Colors or higher; Brightness: 350cd/m^2 or nits or higher, Contrast Ratio (Static): 1100:1, Viewing Angle: 178° Vertical / 178° Horizontal Display; Response Time: 8 ms(Typ) or less, Operation Hour: 24Hr x 7; Frequency: 50Hz ± 2% or better, Audio: 20Watt (10W + 10W); Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 6 SITC of Hard Disk .Spec Surveillance Grade HDD of minimum 7200 rpm for storage 8TB storage capacity.Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 7 SITC of: Business Communication System with all necessary power accessories: EPBAX system with line: 4 Trunk, 8 Digital & 48 Line Analog Extensions, Expendable up to 96 Analog Extensions with all necessary power accessories; Other Faetures: Hotline, Live Call Supervision, Auto Call Back, Automatic Call, Disconnector, Auto Redial,Call Splitting, Call Conference, Direct Inward Dialing, External Call Forwarding, Executive/ Secretary etc. 8 SITC of Digital Telephone Set 9 SITC of Analog CLI Telephone Set. 10 SITC of: 5 pair Un-armoured Telephone Cable {0.5mm.Dia (Minimum)} 11 SITC of: 200 Pair MDF with original Krone Module with 20 SWG GI Sheet Steel Box Enclosure complete WITH ALL ACCESSORIES. 12 SITC & Laying of PVC conduits(ISI marked) laying through surface with all accessories as required FOR THE ENTIRE SYSTEM WITH ALL OEM ACCESSORIES. (Quality: MMS; Ø=25mm) Quality : ISI, Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure. 13 SITC of ceiling speaker 2 Way, Acoustic Suspension ceiling mount speakers with superior sound quality. Components: LF: 8cone driver; HF: 1 soft dome; Frequency range (-10dB): 55Hz - 20kHz; Nominal coverage: H x V: 100° conical; Power rating: 180W PGM; Transformer taps: 60W, 30W, 15W @ 100V; Sensitivity (1W; 1m on axis): 90dB SPL; Peak: 116dB SPL; Certificate: CE, RoHS; Color- White. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 14 SITC of Multichannel Power Amplifier Output power : 1kHz (THD +N=1%: 4Ω/8Ω) 140W x 4 , Frequency response : 0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz) , S/N ratio : ≥ 100dB(A-weighted) , Crosstalk : ≤ -60dB. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 15 SITC of column array speaker Full-range, Bass reflex type slim line array/ column array speaker with 8 x 1.5” Cone; Frequency range (- 10dB): 81 Hz – 20 kHz; Nominal coverage: H x V: 170° x 25° - 30°; Power rating: 160 W PGM; Sensitivity (1W; 1m on axis): 91 dB SPL; Peak: 116 dB SPL. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 16 SITC of Multichannel Power Amplifier Output power 1kHz Non-clip 20msec Burst Both channels driven 300W x 2 @ 8Ω & 2Ω and 500W @ 4Ω; Sampling frequency rate: 48kHz; A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling; THD: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power); Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz); Input impedance: 20kΩ (Balance), 10kΩ (Unbalance); I/O Connectors: Speaker output: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4 PHONE(TS) x2; Line Input: XLR-3-31 x2, 1/4 PHONE(TRS) x2; Inbuilt Load protection, Amplifier protection & Power supply protection. 17 SITC of Digital Signal Processor Sampling frequency rate Internal 48kHz/44.1kHz ; Signal delay : 1.9 msec (AD-DA @48kHz), Total harmonic distortion : “0.05% (+4dBu, Gain:-6dB, 48kHz) 0.1% (+4dBu, Gain: +66dB, 48kHz)” (Measured with a 18dB/Oct filter @80kHz) ; YDIF In YDIF RS-422 16IN RJ45 , YDIF Out YDIF RS-422 16OUT RJ45 ; GPI 16IN / 8OUT IN 0V-5V,(IN 16 L(0V-2.5V)/H(2.5V-24V)), Output channel functions : Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter, AEC. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 18 SITC of Digital Control panel 1 Volume & 4 Switch equipped Wall Mounut Control panel for DSP ; Easy connection by CAT5 carrying RS485 + power.Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 19 SITC of Ceiling Microphone Frequency response: 160Hz – 16kHz(- 10dB) or better; Sampling Rate: 48kHz; Bit depth: 24bit; Latency: 60 [ms] (including signal processing) or lower; Audio I/O Dante: 1in x 2out, In1=AEC reference signal／Out1=output of beam mix, Out2= output of beam mix (simple processed); Maximum input level of SPL: 117.8 dB SPL; Self Noise: -0.8 dBA SPL; SNR(Ref. 94 dB SPL at 1 kHz): 94.8 dBA; Sensitivity: -23.8 dBFS/Pa; Dynamic Range: 118.6 dBA; Signal Processing: Multi beam tracking, Adaptive Echo Canceler, Noise Reduction, Dereverberation, Auto Mixer, Auto Gain Control, Parametric EQ, Output Gain; Power requirements: PoE(IEEE 802.3af), DC 48V; Indicator: Front Indicator(Mute/Unmute & Status) ・Network Port Indicator. (Ceiling Mic & DSP Should be from Same OEM) . Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 20 SITC of L2 Switch for stable operation of a Dante network with Standard IEEE 802.3 (10BASE-T/100BASE-TX/1000BASE-T); Number of ports: 10 Ports; Communication mode: Auto negotiation; Connector type: RJ-45; LAN ports: IEEE 802.3 (1000BASE-T) 2 ports; 8 ports (1-8) PoE Power Supply; PoE Standards: IEEE 802.3at; Max power supply per port: 30 W. 21 SITC of FHD 20x PTZ camera 1080p @ 60 frames per second PTZ Camera with minimum 20X Optical Zoom and FoV of minimum 57 deg, min 100 Presets.Camera should support simultaneous outputs through Ethernet, HDMI, 3G-SDI, Audio In and can be controlled via RS232 & 422 In & Out & IP.Panning angle -170° ~ +170°, Tilting angle -30° ~ +90° . The tilting and panning speed of camera should be minimum 300° per second. Camera should support SRT, FreeD Protocol, PoE and Virtual USB Driver. OEM should be CE, FCC, RoHS & BIS Certified. Warranty: 03 (Three) onsite comprehensive OEM warranty with parts and service. 22 SITC of 86 UHD LED Interactive Display 86, 4K Multi touch interactive display, 450 cd/m2 Panel Technology- IPS, ,Android Pie 11.0, 8 GB Memory, 128 GB storage, Built in Wifi & Bluetooth, 2x20 W - Front Facing Speakers, Continuous Touch Points: 40 Points: Windows,10 Points: Android. Rear port terminals: 4 x HDMI IN, 1 x VGA, 2 x USB 2.0 Type A, 1 x USB 2.0 Type C, 1 x Micro SD, 1 x secure slot (USB 2.0), 1 x OPS slot (15W), 1 x HDMI Out, 1 x RJ45. Front Port Terminals: 2 x USB2.0 Type-A, 1 x USB2.0 Type-B for touch, 1 x HDMI2.0 Input, Capability to connect & disconnect all devices / group of devices from central location. Application have capability to share and finish casting of BYOD device and have a robust authorization management. Power off & Reboot devices from central location also control external devices such as USB cameras, Speakers, control brightness & clear cache. Device active trend and deactive displays, Writing, Pen, Palm Eraser, Save, Screen Capture, Storage and Tool Bar. Supports 3rd party applications, recording feature, USB WEB Cam Compatible, Support PPT, Word, PDF, Image, Video Play, 24x7 operation, with OPS i5, 8GB RAM, 256GB SSD. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 23 SITC of 32 HD Display 32 FHD Ready resolution Android LED display Brightness-500 Nits, Operating Hours- 24x7,with built in 2.4 Ghz Wifi, 1 Ghz Built in Quad core processor, 1.5 GB DDR3 RAM, 8 GB Memory, built in Triple Mali 600 MHz GPU, with 2K HDR, Dolby Audio, Built in Wifi and Chromecast, Built in web browser, HDMI CEC, HDMI ARC, , 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB 2.0 X 1, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1 , RS232CX1. 24 SITC of UHD+ 4x4 HDMI Matrix with Audio Output HDMI input and output with 18Gbps (600MHz) 4K UHD support; DVI 1.0 compliant with the use of an HDMI-DVI adaptor; Supports HD resolutions up to 3840x2160@60 Hz (YUV 4:4:4, 8-bit) & 4096x2160@60 Hz (YUV 4:4:4, 8-bit); Supports 16-bit Deep Color up to 1080p60; Input Port: 4 HDMI; Output Port 4 HDMI, 4 Stereo Audio ( 3.5mm ); HDMI Compliance: HDMI 2.0 (DVI 1.0); HDCP Compliance: 2.x; Input Signal Types: 4096x2160p @ 60 8-bit YUV 4:4:4, HDR 10; Output Signal Types: 4096x2160p@60 8-bit YUV 4:4:4, HDR 10. Warranty: 02 (Two) years onsite comprehensive OEM warranty with parts and service. 25 SITC of Wireless Presenter Operating system Windows 10 and higher macOS 11 (BigSur) and higher Android v9 and higher; Video outputs 4K UHD (3840*2160) @ 30Hz. HDMI 1.4b or USB-C DisplayPort 1.2 (only Gen2); USB: 1 X USB-A, 1 X USB-C ClickShare Buttons 2, Desktop & Mobile Native protocols: Airplay, Google Cast, Miracast* Maximum number of simultaneous connections (with Buttons and/or App): 32; Noise Level: Max. 25dBA @ 0-30°C Max. 30dBA @ 30-40°C Authentication protocol WPA2-PSK in stand alone mode WPA2-PSK or IEEE 802.1X, Wireless transmission protocol IEEE 802.11 a/g/n/ac and IEEE 802.15.1; Reach: Adjustable with signal strength modulation; max. 30m (100 ft),Frequency band: 2.4 GHZ and 5 GHz. including 2 additional buttons. 26 SITC of 1.5 sq mm Speaker Wire: 27 SITC of CAT6 Cable: 28 SITC of 15/10/5/2/1 mtr HDMI Cable- as required 29 SITC of AUDIO Cable 30 SITC of 10 mtr USB Cable 31 SITC of 25mm PVC Conduit/Casing/Raceway with accessories 32 SITC of Connectors & Interconnects 33 Mics - installation accessories 34 SITC of Digital Podium with 20 or bigger touch display & gooseneck microphone All-in-one Podium with Podium body made from 1.5mm thick CRCA steel, duly powder coated, with security lock cover for Touch display max size 24 Diagonal. With Keyboard tray housing, Mouse, Drawer for doc cam, space for keeping extra laptop/tablet, Gooseneck mic with switch, W/o Central Controller, 360 degree heavy duty movable castor, Open from Front & Back for easy installation, Adjustable Rack, Ample ventilation.Multimedia Controller with Control out put, Multiple input & switchable output. Warranty: 01 (ONE) years onsite comprehensive OEM warranty with parts and service. 35 SITC of Wall Speaker SITC of Wall Mount Speaker with all necessary accessories, having minimum technical specification: System Type: Full range, Acoustic suspension; Components: 3.5 full range; Frequency Range (-10dB): 130Hz-20kHz; Coverage Angle (Horizontal x Vertical): 150° x 160°; Nominal Impedance: 8Ω; Power Rating: 40W; Sensitivity (1W, 1m): 86dB SPL; Maximum SPL (Caluculated, 1m): 105dB SPL; Connectors: 1x Euroblock (4P) (Input: +/-, Loop Thru:+/-); Material, Finish, Color: Black, White; Accessories: Owners Manual, Retaining knob, Terminal cover screw, Wall / Ceiling mount bracket, Terminal cover. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 36 SITC of Mixer Amplifier Output Power : 120W x 2 (20ms Burst) ; Total harmonic distortion : ≤0.2% (Line in to Speaker out, Half power @1kHz, 3Ω/4Ω/8Ω), ≤0.2% (Line in to Speaker out, Half Power @1kHz, 70V/100V, 120W/200W) ; Crosstalk : ≤ -70dB (MIC/LINE input to other MIC/LINE input) ; Mic/Line Input : Input 1-6: 3.5mm Euroblock (6-pin, balanced) x 3. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 37 SITC of 65 4K display: 65 4K UHD (3840x2160 Ready resolution , Brightness-350 Nits, Operating Hours- 24x7,Built in Android OS LED display with built in 2.4 Ghz Wifi, 1.1 Ghz Built in Quad core processor, 2 GB DDR3 RAM, 16 GB Memory, built in Triple Mali 600 MHz GPU, with 2K HDR, Dolby Audio, Built in Wifi and Chromecast, Built in web browser, HDMI CEC, HDMI ARC, 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB 2.0 X 1, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1 , Haze-28%, RS232CX1. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 38 SITC of 43 4K UHD (3840x2160) Display Supply, Installation, Testing and Commissioning of 43 4K UHD (3840x2160) Ready resolution Built in Android OS LED display with brightness- 500 Nits, Operating Hours 24x7, built in 2.4 Ghz Wifi, 1.1 Ghz Built in Quad core processor, 2 GB DDR3 RAM, 16 GB Memory, built in Triple Mali 600 MHz GPU, with 2K HDR, Dolby Audio, Built in Wifi and Chromecast, Built in web browser, HDMI CEC, HDMI ARC, 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB 2.0 X 1, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1 , RS232CX1, Haze-28%. Warranty: 03 (THREE) years onsite comprehensive OEM warranty with parts and service. 39 SITC of UHD+ 4x4 HDMI Matrix with Audio Output HDMI input and output with 18Gbps (600MHz) 4K UHD support; DVI 1.0 compliant with the use of an HDMI-DVI adaptor; Supports HD resolutions up to 3840x2160@60 Hz (YUV 4:4:4, 8-bit) & 4096x2160@60 Hz (YUV 4:4:4, 8-bit); Supports 16-bit Deep Color up to 1080p60; Input Port: 4 HDMI; Output Port 4 HDMI, 4 Stereo Audio ( 3.5mm ); HDMI Compliance: HDMI 2.0 (DVI 1.0); HDCP Compliance: 2.x; Input Signal Types: 4096x2160p @ 60 8-bit YUV 4:4:4, HDR 10; Output Signal Types: 4096x2160p@60 8-bit YUV 4:4:4, HDR 10. Warranty: 02 (Two) years onsite comprehensive OEM warranty with parts and service. 40 SITC of Wireless Lapel Mic: 24 MHz bandwidth 8 frequency banks with each 12 presets, Mute button for full speech control Synchronization via RF remote channel, High-quality true diversity reception, Pick-up pattern tobe cardioid, Automatic frequency scan feature searches for available frequencies, Frequency response (microphone) 80 - 16000 Hz, Dynamic microphone with Cardioid Dynamic Capsule, Sound pressure level (SPL) 149 dB(SPL) max THD, total harmonic distortion < 1 %, RF output power 10 mW, Transducer principle to be permanently polarised, AF sensitivity 1,5 mV/Pa, Signal-to-noise ratio> 103 dB(A). Warranty: 02 (Two) years onsite comprehensive OEM warranty with parts and service. 41 SITC of Wireless Handheld Mic 24 MHz bandwidth: 8 frequency banks with each 12 presets, Mute button for full speech control Synchronization via RF remote channel, High-quality true diversity reception, Pick-up pattern tobe cardioid, Automatic frequency scan feature searches for available frequencies, Frequency response (microphone) 80 - 16000 Hz, Dynamic microphone with Cardioid Dynamic Capsule, Sound pressure level (SPL) 149 dB(SPL) max THD, total harmonic distortion < 1 %, RF output power 10 mW, Transducer principle to be permanently polarised, AF sensitivity 1,5 mV/Pa, Signal to-noise ratio> 103 dB(A). Warranty: 02 (Two) years onsite comprehensive OEM warranty with parts and service. 42 SITC of Small format PC for Podium with dual HDMI output: 43 SITC of Ceiling/Wall Brackets for Displays 44 SITC of 1.5 sq mm Speaker Cable: 45 SITC of CAT6 Cable: 46 SITC of 15/10/5/2/1 mtr HDMI Cable- as required 47 SITC of AUDIO Cable 48 SITC of 25mm PVC Conduit/Casing/Raceway with accessories 49 SITC of Connectors & Interconnects
Contract Date: May 17, 2026 Contract Value : ₹ 57.09 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
7.
Educational and Research Institute #10874683 AOC
Bids Are Invited For Manpower Outsourcing Services - Fixed Remuneration - Admin; Computer Operator Grade A; Intermediate with Computer science from recognized University Institute Board Or O Level certificate from DOEACC with Intermediate , Manpower Outsourcing Services - Fixed Remuneration - Healthcare; Physical Instructor; Bachelor Degree in relevant discipline Or Diploma in Physical Education with 5 year experience as Physical Instructor , Manpower Outsourcing Services - Fixed Remuneration - Admin; Vyaiktik Sahayak Grade 2; Graduate with Shorthand Typing speed in Eng 120 80 and Hin 60 40 word per min and 2 years experience , Manpower Outsourcing Services - Fixed Remuneration - Admin; Ashulipik; Graduate Shorthand Typing speed in Eng 120 80 and Hin 40 30 Word per min and 2 years exp Or 12th with Diploma in Stenography and Secretarial Practice having a speed of 120 80 and .. , Manpower Outsourcing Services - Fixed Remuneration - Finance/Accounts; Accountant; M Com with 4 years experience or Post Graduate Diploma in Accountancy with 5 years experience in accounts working Desirable BBA or ICWA certificate , Manpower Outsourcing Services - Fixed Remuneration - Finance/Accounts; Sahayak Lekhakar; B Com with accountancy or Post Graduate Diploma in accountancy with 3 years experience in accounting Or M Com with one year experience in accounting , Manpower Outsourcing Services - Fixed Remuneration - Admin; Pustkalay Sahayak; Bachelor Degree in Library Science with 1 year experience in any Educational Institution and computer awareness Or Diploma in Library Science with 2 Years experience in an.. , Manpower Outsourcing Services - Fixed Remuneration - Admin; Pradhan Sahayak; Intermediate with certificate of CCC Certificate DOEACC Typing speed Hindi English both 25 per minutes with 07 year clerk Typist Junior Assistant or equivalent , Manpower Outsourcing Services - Fixed Remuneration - Admin; Varishth Sahayak; Junior Clerk having 5 year working experience , Manpower Outsourcing Services - Fixed Remuneration - Admin; Kanishth Sahayak; Intermediate with C C C Certificate DOEACC and Typing speed Hindi English both 25 30 per minutes , Manpower Outsourcing Services - Fixed Remuneration - Admin; Store Keeper; Graduate in any discipline with 5 year experience as Junior Storekeeper with good knowledge of Inventory control and Store maintenance , Manpower Outsourcing Services - Fixed Remuneration - Admin; Sahyak Store Keeper; Intermediate with 5 year experience Or Intermediate and typing knowledge with 60 40 words per minutes in English Hindi typing with 1 year experience Knowledge of invento.. , Manpower Outsourcing Services - Fixed Remuneration - Others; Electrician; ITI Certificate from recognized respective Trade with 3 Year work experience Desirable License Holder as recognized by the UP Government , Manpower Outsourcing Services - Fixed Remuneration - Non-IT Technical; Instructor; Diploma in relevant discipline Mechanical Civil Electrical Computer Science from recognized institutions with Five year Experience in relevant field , Manpower Outsourcing Services - Fixed Remuneration - Non-IT Technical; Mechanic Grade A; High School Diploma in appropriate discipline Mechanical Civil Electrical Com puter Science with 2 year experience in appropriate field OR ITI Certificate in res.. , Manpower Outsourcing Services - Fixed Remuneration - Non-IT Technical; Mechanic Grade B; ITI Certificate in appropriate discipline Mechanical Civil Electrical Com puter Science with 3 year working experience in respective Trade Laboratory , Manpower Outsourcing Services - Fixed Remuneration - Others; Prayogshala Sahayak; Intermediate with science discipline with 02 years experience Or ITI Certificate in appropriate discipline with 2 years experience Or Diploma in appropriate disciplin.. , Manpower Outsourcing Services - Fixed Remuneration - Healthcare; Pharmacist; Intermediate in science and diploma in pharmacy with 2 year experience with registration required as per state Govt Norms , Manpower Outsourcing Services - Fixed Remuneration - Non-IT Technical; Avar Abhiyanta Electrical Civil and Mechanical; High School with 3 years Diploma Engg with 3 year Experience , Manpower Outsourcing Services - Fixed Remuneration - Others; Mason; ITI Certificate form recognized institution in civil construction trade with a working experience of 2 years , Manpower Outsourcing Services - Fixed Remuneration - Others; Plumber; ITI Certificate form recognized institution in Plumbing trade with a working experience of 2 years in plumbing , Manpower Outsourcing Services - Fixed Remuneration - Others; Carpenter; ITI Certificate in corresponding trade with 3 year experience in respective field Or Class VIII pass with 5 year experience of working as Mason Carpenter in a reputed Constructio.. , Manpower Outsourcing Services - Fixed Remuneration - Others; Driver; Class VIII pass having driving license with a minimum of Two year working experience in any office , Manpower Outsourcing Services - Fixed Remuneration - Others; Mali; Class V pass with a minimum of one year working experience in any office , Manpower Outsourcing Services - Fixed Remuneration - Others; Daftari; Class 5th Pass with Experience in Cycling , Manpower Outsourcing Services with Experience in Cycling , Manpower Outsourcing Services - Fixed Remuneration - Others; Cook Attendant; Class 5th Pass with Experience in cooking , Manpower Outsourcing Services - Fixed Remuneration - Others; Tube Well Operator; Class 5th Pass with Experience in Cycling , Manpower Outsourcing Services - Fixed Remuneration - Others; Book Lifter; Class 5th Pass with Experience in Cycling and Reading Writing of English and Hindi Language , Manpower Outsourcing Services - Fixed Remuneration - Others; Helper; Class 5th Pass with Experience in Cycling , Manpower Outsourcing Services - Fixed Remuneration - Others; Sweeper; Class 5th Pass with Experience in Cycling , Manpower Outsourcing Services - Fixed Remuneration - Others; Hostel Attendant; High School with knowledge of hostel working Or Intermediate with Two Year experience , Manpower Outsourcing Services - Fixed Remuneration Total Quantity :
Contract Date: Ref. Documents Contract Value : ₹ 8.45 Crore
Boards / Undertakings / PSU No of Bidders 166
Uttar Pradesh View Result →
8.
Defence #10801071 Price Bid
Tender For Comprehensive B R And Em Repair Maintenance Works To 14 Asc Af Kakkanad Under Age I R D Kochi; 1 Hacking out old broken glass panes 4 mm thick from steel frame including putty/ metal beadings and supply and fix sheet glass ordinary 4 mm thick, in squares n.exc. 0.50 Sqm in each pane including necessary new oil putty or with existing metal beadings complete all as specified and as directed 2 Hacking out old broken glass panes 4 mm thick from wooden framed shutters including putty/wooden beadings and supply and fix sheet glass ordinary quality, 4 mm thick, in square n.exc. 0.5 Sqm in each pane including necessary oil putty/wooden beads complete all as specified and as directed. 3 S&F in repairs extruded aluminium anodised 150 mm long handles fabricated type. 4 All as per item No 3 above but 100 mm long. 5 Supply and fix in repairs foot operated door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring and cover plate overall length 150 mm including taking down defective foot operated door stopper all as specified and as directed. 6 S&F in repairsmortice lock brass 4 levers vertical type 100 mm 7 S & Fin repairs door closer hydraulically regulated, castiron body, designation No -3, universal type ,suitable for door shuttersof 851 to1000 mm in width and of wt between 61 to 80 Kg and fixed 8 Re securing and easing to wooden shutters of any description area n.exc 1 Sqm each without taking down the shutter all as specified and as directed. 9 Re securing and easing to wooden shutters of any description exc 1 Sqmbut n.exc 2 Sqm each without taking down the shutters all as specified and as directed. 10 S&F In repairs Aluminium anodised, barrel tower bolts of extruded section 150 mm long. 11 All as per item No 10 above but 100 mm long. 12 S&F in repairs Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy, 300 mm long 13 Taking down shutters exc 1 sq. m and n exc2 sq. m each and re-fixing in same openings. 14 Taking down shutters n exc 1 sq. m each and re-fixing in same openings. 15 S&F in repairs Butt hinges, medium weight cold rolled mild steel 100 mm size. 16 All as per item No 15 above but 75 mm size. 17 Taking down and removing to or from store chowkats or framesexc 1.5 sq. m and not exc 4 sqm each but with shutters (without taking off shutters from the frames) 18 S&F Solid PVC door frame of size 50mm x 47mm made of of 5mm plain color PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing. 19 S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain color PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain color PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. 20 S&F Aluminium, anodised, barrel tower boltsof extruded section and fixed length of bolt in 200 mm complete all as specified and directed. 21 S&F Butt hinges, medium weight, cold rolled mild steel, and fixed size of hinges in 100 mm complete all as specified and directed. 22 S&F Aluminium handles, cast type, anodised size of handle in 150mm 23 Supply and fix in repair PVC low level flushing cistern 10 liters capacity with ISI mark including inlet, ball valve, float, handle and brackets etc. including taking down old defective low level flushing cistern all as specified and as directed. 24 Supply and fix plastic seat and cover superior quality closed pattern with flat bottom of heavy duty including necessary hinged devices, including taking down damaged/ broken plastic seat and cover from EWC all as specified and as directed. 25 Supply and Fix in repair PVC connection with PTMT nuts of length 450 mm screwed for iron pipe15 mm bore. 26 Supply and fix in repair 15 mm dia CP pillar cocks fancy type for wash hand basin including taking down existing pillar cock, all as specified and as directed. 27 Supply and fix 150 mm square grating of PTMT to floor trap/nahani trap including taking down existing damaged CI grating from floor tap/nahani trap all as specified and as directed. 28 Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15mm bore pipe, all as specified and as directed. 29 All as per item No 28 above but 20mm bore. 30 All as per item No 28 above but 25/32 mm bore. 31 Supply and fix Unplasticised PVC pipes of bore 15mm, pressure rating 10 Kg/Sq. Cm pressure rating 10 Kgf/Sq. Cm all as specified and as directed 32 Supply and fix Unplasticised PVC pipes of bore 20mm, pressure rating 10 Kg/Sq. Cm pressure rating 10 Kgf/Sq. Cm all as specified and as directed 33 Supplying and laying of CPVC pipes 20 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 34 S&F in repairs bib taps 15mm bore, cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed for iron pipe or for brass ferrule all as specified and as directed 35 S&F in repairs stop valves 15mm bore, cast copper alloy chromium plated fancy type, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed. 36 S&F in repairs vitreous china wash basin white flat back, size 580x450mm excluding taps waste, chain and plug and porcelain stopper including brackets all as specified and as directed. 37 S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe). 38 Supply and fix tubular towel rail aluminium anodised20 mm dia D type 60 cm long between flanges including taking down defective aluminium tubular towel rail all as specified and as directed. 39 Supply and fix in repair beveled edgedmirror of size 600 x 450 mm selected quality glass mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. 40 S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls 75 mm bore. 41 All as per item 40 above but 110 mm bore 42 S&F PVC (SWR) bends any radius 75 mm bore 43 Supply and fix in repairs 100 mm dia CIfloor trap/nahani trap including taking down existing damaged CI grating from floor trap/nahani trap 44 M&L Dismantling water tanks and removing to store exc 250 & n exc 500 capacity 45 M&L Dismantling water tanks and removing to store exc 500 & n exc 1000 capacity 46 M&L Rotational moulded polyethylene water storage tanks 500 litres capacity(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia PTMT Ball valve high pressure all as directed. 47 Allas per item No 46 above but 1000 ltr capacity 48 M & L for PU injection grouting by making necessary holes of 8 to 10 mm in concrete to a depth of about 75mm using proper electric hammer drill. Fix new nipples of 8 to 10mm using aluminum pipes using neat cement or M-Seal for proper anchorage. Carry-out pressure grouting using shaligrout 2k /equivalent) using a proper grouting pump. Seal the holes properly after the grouting nipples have been removed all as specified and directed by Engg -In Charge. 49 Material and labour for taking down old plaster and rendering 10mm thick in CM 1:6 on other than fair faces of brickor concrete surfaces finishing smooth and even and smooth without using extra cement making good match the old surface finish. 50 M&L two coat of OBD over a coat of primer on newly plastered surfaces of wall including cornices and preparation of surfaces. 51 M&L pre laminated particle board 12mm thick interior grade pre laminated one side with decorative choice lamination and other side balancing white lamination fixture with screws to frame work 52 Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge 53 M&L Screed bed or bedding layer 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed by Engineer-in-Charge 54 M&L Rendering 10 mm thick in CM 1:3 on brick or concrete surfaces, finished fair and even for receiving wall tiles. 55 S&F glazed ceramic coloured tiles 300 x 200 x 7 mm thickon vertical surfaces, set and jointed in neat cement slurry and pointed in white/colour cement to match over 10 mm thick rendering (backing coat)in cm 1:3, complete all as specified and directed by Engineer-in-Charge. 56 M & L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm In floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge 57 S&F Vitrified ceramic coloured tiles 10mm thick (Square/ Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match 58 S&F in repairs health faucet 15mm size chromium plated standard size all as specified and directed. 59 Supply and fixed in repairs stainless steel wire cloth, 0.63mm nominal dia of wire and average width aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples 60 M&L for chip and remove all damaged and de bonded concrete and plaster from the RCC slabs by manually or mechanically so as to expose the corroded reinforcement bars, removingthe debris with in a lead of 100 meters as directed by Engineer-in-charge. 61 M&L for supply and application of Nitobond EP (Manufactured by M/s Fosroc chemicals India Ltd) epoxy bonding agent over the old concrete surface complete all as specified and all as directed by Engineer-in-charge. 62 M&L for supply and application of rust remover/converter (Rebaklense RR of M/s Fosroc Chemicals India Ltd. or equivalent) or Amandur ,(manufactured by GK technocom) over the corroded reinforcement bar where ever micro concreting is required and cleaning the same after application complete all as directed by Engineer-in-charge. 63 M&L for plastering with Nitobond SBR (Styrene butadiene polymer bonding agent cum cement mortar/concrete modifier Manufactured by M/s Fosroc Chemicals India Ltd or equivalent) modified cement mortar (1:4) under the slab to an average thickness of 40 mm (applied in two layers not exceeding 20mm each) , including the cost of all materials rent of tools and labour charges etc complete all as directed by Engr-in-charge. 64 M&L Preparation of newsurfaces of ceiling and applying two coats of distemper oil emulsion on ceiling over a coat of primer over 3 mm thick wall care putty plastered and other surfaces with alkali resistant priming paint complete all as specified. 65 Taking down cement plaster of any description on walls incl raking out joints, hacking for key scrubbing down with water 66 M&L for plastering in CM1:6, 10 mm thick on interior walls finished even and smooth w/o using extra cement. 67 M&L for plasteringin CM 1:3, 5mm thick on ceiling finished even and smooth w/o using extra cement 68 M&L for two coats of Antifungal paint (Apex ultima Protek of Asian paint or Equivalent in approved Makes) over a coat of Exterior primer (Professional pack of Asian paints) over a coat of external wall care putty n.exc 2 mm thick on new or old prepared plastered external surfaces . 69 M&L Preparation of Newsurfaces of internal walland applying two coats of distemper oil emulsion on wall over a coat of primer plastered and other surfaces with alkali resistant priming paint over 3mm thick wall care putty complete all as specified. 70 M&L Preparation of oldsurfaces of internal wall by complete removal of existing treatment , and applying two coats of distemper oil emulsion on wall over a coat of primer plastered and other surfaces with alkali resistant priming paint over 3mm thick wall care putty complete all as specified. 71 M&L Preparation of old surfaces of ceiling by complete removal of existing treatment, and applying two coats of distemper oil emulsion on ceiling over a coat of primer, plastered and other surfaces with alkali resistant paint complete all as specified. 72 Demolition of brick work / PCC block masonry work built in cement mortar etc complete all as specified. 73 M&L Precast Concrete block masonry with solid blocks in PCC 1:3:6 type C1 (using 20 mm stone agg) exc 10 cm in width and setting in mortar 1:4with minimum compressive strength of 5N/ sq mm complete all as specified and as directed. 74 M&L for providing and fixing Gypsum Board 12mm thick in walls fixed with screw as per manufacturer’s instructions complete all as specified. 75 Dismantling in Wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified. 76 M & L Anodised aluminium snap grid frame work (size of grid 605x 605) mm for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified all as specified and as directed. 77 M&L for providing and fixing Exposed metal frame ceiling with fire resistant calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) fixed with screw as per manufacturer’s instructions complete all as specified. 78 Cleaning (mechanically)of sewage line/effluent drains 150/110 mm dia and disposing offthe sludge outside MoD land complete all as directed. 79 Removing the chokes in drains of WC/bath room/kitchen up to 1st manhole including cleaning of gully traps in single storey/ground floor of multi storeyed buildings, all as specified and directed. 80 Removing chokes in drains of WC/bath room/kitchen other than ground floor all as specified and directed. 81 Destruction of growth of weed plants with roots level on wall/ roof of building any height with weedicides such as Round up manufactured by Excel Chemical Industries and sprayed in and around roots and the place of possible growth of weeds as per manufacturer’sinstructions and making good the surfacescomplete all as specifiedand as directed. 82 Demolition of reinforced cement concrete in any position not otherwise specifically provided for 83 M& L for Precast RCC Cover slabs type B-1, 1:2:4 (20 mm graded stone aggregate as in slabs of drains including necessary form works. (Reinforcement bar will be measuredand paid separately). 84 M&L TMT bars 10mm dia and over cut to length bent to shape required, including, cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed ) not less than 0.9mm dia or securing with clips 85 Demolition of cement concrete in any position not otherwise specifically provided for complete all as specified and directed. 86 M & L for 1:3:6 Type C-2 (using 40 mm graded stone aggregate) for surface channels anddrains all as specified 87 Extra for forming fair finished drain or channel 30 Cminner girth in cement concrete ,using extra cement, including forms, moulds, mitered /stopped endsetc 88 Opening manhole of septic tank remove night soil and sediments including liquid by mechanical pumping into tanker lorry having cleaning internal surface with water and re-fix the manhole covers, complete all as specified and directed. Notes :-(i)Volume of the manhole will be worked out based on the depth or actual depth of sludge, whichever is less.(ii) Water shall be procured by the contractor for cleaning purpose. 89 Demolition of cement concretein ground floors and pavings n.exc 15 cm thickness (below or above ground level) 90 M&L for 100mm thick PCC ( 1:3:6)type C-2,using 40mm graded stone aggregate as in hard standing/path/sub basefinished to an even and fair surfaces. 91 M&L forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound Grade A. 92 Dismantling structural steel work incl doors, gates but excluding framed trusses. 93 S & FMS work in railings, balusters, posts and struts in fencing etc including cutting tops to shapeas directed, includingall necessary welding, drilling bolting or riveting etc and similar work conforming to FE 290 Gd E-165 complete all as specified 94 S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering.Doors etc to be prepared for hanging with and including hooks and hinges, also fastening and fixing complete conforming to Fe-410W (Gde-E-250) 95 M&L for Point wiring for light point /fan point/Exhaust fan /Bell Pointwith 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with modular switch, modular plate and cover with GI box and earthing the point with 1.5 sq.mm FRLS PVC insulatedcopper conductor single core cable etc. including dismantling /removing of burnt cable/making good surface asrequired . 96 M&L for submain wiring for 5 Amp socket outlet point on independent board with 2x 1.5 sqmm single core PVC insulated and unsheathed FRLS cable, 1100 volts grade IS -694 marked with multi standard copper conductors and earth continuity wire with similar 1x1.5 sqmm cable (incl connecting to earth dolly) drawn through and single core cable in surface/recessed medium class PVC conduit including dismantling /removing of burnt cable/making good surface as persiterequirement . 97 Supply and fixingsuitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular switch and 5/6A modular socket ,connection etc. as required atsitecomplete all as specified and directed (for Independent 5 Amp socket ) . 98 M&L for wiring for circuit along with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed steel conduit as required .wire 2x22.5 sq.mm + 1x2.5 sq.mm earth wire for 15/25 power plug/socket. 99 All as per item above but Supply and fixingsuitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 15/16 A modular switch and 15/16A modularsocket ,connection etc. as required atsitecomplete all as specified and directed( for 15/16 Amp Socket ). 100 M&L for wiring for circuit along with 4 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface /recessed steel conduit as required .wire 2x4 sq.mm + 1x4 sq.mm earth wire (for Ac & Geyser ) 101 S&F Electronic ceiling fan regulator, modular type stepped /socket type heavy duty suitable to work on 230 volts complete all as specified and directed. 102 Supply & Fixing piano type 5/6 amps switch on the existing Switch box including connection as required on site. 103 Supply & Fixing piano type 2 way 5/6 amps switch on the existing Switch box including connection as required on site. 104 Supply & Fixing piano type 15/16 amps switch on the existing Switch box including connection as required on site. 105 Supply & Fixing piano type 3 pin 5/6 amps socket outlet switch on the existing Switch box including connection as required on site. 106 Supply & Fixing piano type 6 pin 15/16 amps socket outlet switch on the existing Switch box including connection as required on site. 107 Supply & Fixing 5/6 Amodular switch on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 108 Supply & Fixing 15/25 Amodular switch on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 109 Supply & Fixing 3 pin 5/6 modular socket on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 110 Supply & Fixing 6 pin 15/25 modular socket on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 111 Supply & Fixing modular bell push on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 112 Supply and fixing 1 or 2 module base & cover plate on existing modular metal boxes etc as required. 113 Supply and fixing 3 module base & cover plate on existing modular metal boxes etc as required. 114 Supply and fixing 4 module base & cover plate on existing modular metal boxes etc as required. 115 Supply and fixing 6 module base & cover plate on existing modular metal boxes etc as required. 116 Supply and fixing 8 module base & cover plate on existing modular metal boxes etc as required. 117 Supply and fixing LED light fitting 1X20W,220V high efficiency(efficiency up to 100lm/w) polycarbonate batten bright light having high quality material and design, compact appearance simple and versatile in nature makes it as long lasting efficient solution, Make Crompton, Product code : CCS-102-20-30/40/65-SL-DP-NWHor GM/ Panasonic/Havells etc. 118 Supply and fixing LED light fitting 1X10W,220V high efficiency(efficiency up to 100lm/w)polycarbonate batten bright light having high quality material and design, compact appearance simple and versatile in nature makes it as long lasting efficient solution, Make Crompton, Product code : CCS-102-10-30/40/65-SL-DP-NWH or Havells /Panasonic/GM etc. 119 S & F in repairs LED 20W T8 Tube within built driver and efficiency of 100lm/w having glare free lighting distribution, double sided connection, housing made of high grade polycarbonate cover, 2.5 KV internal surge protection, IP20 ingress protection, PCB mounted on extruded metal plate. Make: Crompton model No LT8-20-865-(2) or equivalent in Havells/C&S/ Phillips/Bajaj. 120 S&F switch socket combination 5 Amp with PVC box suitable for 230 Volt on surface. 121 S&F switch socket combination 15 Amp with PVC box suitable for 230 Volt in surface 122 M&L switch socket combination2 in 1, 6/16 Amp flush type in existing switch box. 123 All as per item above but 6 Amp flush type in existing switch box. 124 M&L forbell AC 230 V Single pole ding dong type. 125 Supply and fixing angular type batten holder insulator body of PVC/ polycarbonate type suitable for 10/9 W Led bulb. 126 Supply and fixing fan condenser / capacitor of size 2.25/2.5 suitable for ceiling fan of any sweep. 127 Supply and fixingonly LED lamp of 9 watt, Make : Crompton/ Havells /Panasonic 128 S&F of 20 Amps 240 V , SPN Industrial type socket outlet, with 2 pole and earth ,metal enclosed plug top along with 20 A C Curve ,SP MCB , in sheet steel enclosure ,on surface or in recess with chained metal cover for the socket outlet and complete with connections ,testing and commissioning etc. as required . 129 Supplying and fixing 6 way, Double door single pole and neutral sheet steel, MCB distribution board,240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar ,din bar interconnections, powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 130 Supplying and fixing 8 way, Double door single pole and neutral sheet steel, MCB distribution board,240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar ,din bar interconnections, powder painted including earthing etc. as required (But without MCB / RCCB/Isolator) 131 Supplying and fixing 4 way, Horizontal type , Three pole and neutral Dl sheet steel, MCB distribution board, 415V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar interconnections, powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator) 132 Supply and fixing of 5A to 32 A rating, 240/415V, 10kA C curve miniature circuit Breaker suitable for inductive load of single pole in the existing MCB DB Complete with connections, testing and commissioning etc ax required. 133 Supply and fixing of 5A to 32 A rating,240/415V, 10kA C curve miniature circuit Breaker suitable for inductive load of single pole and neutralin the existing MCB DB Complete with connections, testing and commissioning etc ax required. 134 Supply and fixing of 63 A rating,240/415V, 10kA C curve miniature circuit Breaker suitable for inductive load of Triplepole and neutralin the existing MCB DB Complete with connections, testing and commissioning etc as required. Make: IndoAsain, HSN Code: 8536, Cat. Nos.: 810107 or equivalent make of LT/ Havells. 135 M & L LED Square surface mounted Led Panel 12w, PDC housing and high translucent frosted plastic diffuser makes it a robust Luminar and efficiency up to 100lm/w. Make: Crompton, Model no LCDSPLN-R-12-CDL or equivalent make of GM/Havells. 136 M & L LED Round and Square recess mounted 12w LED edge lit slim down light with die cast aluminium housing finished in premium white coating and efficacy up to 100lm/w suitable for false ceiling. Make Crompton, Model no LSCRM-12W-WW/NW/ CDL or equivalent make of GM/Havells. 137 Dismantling and taking down ceiling fan any size for servicing by cleaning dust, filling cavities with filler and painting complete with synthetic enamel paint by spraying and re fixing the same in position, connecting and testingall as specified and directed. 138 M & L for carry out rewinding of ceiling fan motor of any size/ make including taking down from any height ,dismantling ceiling fan motor , removing old burnt winding wire, cleaning the armature thoroughly and replacing the same with new enameled copper wire of adequate size/gauge including class B insulation, varnishing heating etc, reassembling and removing the old painting and providing newpainting to ceiling fanscompletewith synthetic enamel Grey paintby spraying using machine including filling cavities with filler one coat after cleaning all dust making the surface in good finishes etc , testing, re-fixing the same in original position complete all as specified and as directed by the Engineer - in - Charge.Note: Rate include the taking down the ceiling fan and deposited to MES store for checkingand repairing) 139 All as per Item above but for the Exhaust fan of 300 /450 mm sweep sizes: 140 S & F in repairs of LED 36W surface full lit luminaire with glare free uniform illumination with longer life and less maintenance available in 2x2 ft (> 100 lm/w).Make: Crompton, Model No LCTLSNE-36-FO-WW/TL/CDL or Havells /C&S/ Phillips/Bajaj. 141 Supply andLayingGI tubing medium grade of size 50 mm with and including all fittings such as bends, elbows, tees, short pieces etc complete in trenches of following sizes after taking down old unserviceable GI pipes all as specified and directed by Engr in charge. Note- Excavation & earth work will be measured & paid separately. 142 All as per item above but 40 mm bore 143 All as per item above but 25 mm bore 144 Supply & Fixing of Size 50 mm GI tubing medium grade withand including all fittings such as bends, elbows, tees, short pieces etc complete on wall and ceiling or laid in floors after taking down old unserviceable GI pipes all as specified and directed by Engr in charge. 145 All as per item No 4 above but 40 mm bore 146 All as per item No 4 above but 25 mm bore 147 All as per item No 4 above but 20 mm bore 148 Repairs to leakage /damaged G.I. pipe of size 50/40 mm bore including necessary excavation, returning, filling in removal/ pump out the line water cutting out GI pipes at both ends replacement ofGI Pipe and jointing with new fittings accessories such assockets, tees, reducers, Nipples ,Bends etc. all asdirected by Engr- in- charge. Note:- G.I. pipe length will be measured and paid separately under relevant item of sch A 149 All as per item above but 25/20 mm bore 150 Supply and fix in repairs gun metal gate valve of size 50 mm ISI marked with iron wheel head screwed both ends all as directed. 151 All as per item above but 40 mm bore 152 All as per item above but 25 mm bore 153 All as per item above but 20 mm bore 154 All as per item above but 15 mm bore 155 S&F in repairs un plasticized PVC pipe, 25mm bore of pressure rating 10 Kg/ Sqcm with all fittings, fixed to walls, ceilings or in floors complete with snap clips hooks etc and taking out old unserviceable one all as specified an as directed 156 All as per item above butof size 20 mm bore dia 157 Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft / loose soil forlaying/taking out GI pipe line all as specified and directed. 158 Returning filling in including spreadingleveling watering and well rammingin layer not exceeding 25 cm in soft/loose soil all as specified and directed. 159 Removing excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mabove the starting point all as specified and directed. 160 M & L for removing the dirt, sediments, silt, algae, fungi etc, from the bottom and walls of the inside of the RCC Under Ground Sump of10,000 Ltrscapacity by dewatering the sump and cleaning the complete inner surfaces by rubbing / scrapping by wire brush to removethe sludge, washing with bleaching powder solution and then with water and draining out sludge, water completely including applying one coat of white wash to all the inner surfaces, and details of tanks like date of cleaning ,capacity of tanks etc shall be written on the outside of the tank with synthetic enamel paint with lettersize 20 cm high in white color , over a black backgroundof size 100x60 cmand charges included for pump set for de watering incl operator all as specified anddirected 161 M&L for removing the dirt, sediments, silt, algae, fungi etc, from the bottom and walls of the inside PVC Service tanks kept on roof top of buildings or on stagings, cleaning the surface using brush and other cleaning materials such as bleaching powder as required including writing the capacity of the tank and date of cleaning with white enamel paint over black back ground all as specified and directed for the following capacity of tanks at different locations on Technical/Residential Buildings all as specified and directed by Engr-in-Charge. 162 2000 Ltr capacity 163 1000 Ltr Capacity 164 500/300 Ltr capacity 165 S&F in repairs float Valve 40mm bore (Ball brass valves) high pressure type with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed and taking out old unserviceable one all as specified and directed 166 All as per item above but of size 25mm bore 167 All as per item above but of size 20mm bore 168 S&F in repair/replacement HDPE Tank cover suitable for 300 to 1000 Litr capacity and taking out old unserviceable one 169 All as per item above but for 2000Ltr capacity tanks 170 M&L for repair/replacement ofFoot valve of size 50mmbrass heavy duty including taking up the suction pipe and re-fixing the same after replacement of foot valve in to the sump for proper functioning of pump and taking out old unserviceable one all as specified and directed 171 Dismantling of Mono-block Pump set from the existing position for servicing including opening the pump replacing the unserviceable ball bearings of suitable size for capacities up to 5 HP including greasing complete all as specified and directed 172 Repairs and servicing of Electric chlorine dozing Pump/ system Make Sathya sai Aqua Pura Services with Ant siphon valve including servicing of pump and motor with repair/ replacement of unserviceable parts like piston, stroke controller, suction and delivery tubing, PVC foot valve, nozzle, solution tank inlet, PVC water tubing 15mmbore, gate valve 15mm size etc, complete all as specified and directed. 173 M&L for cleaning of pump sets starter panel after dismantling the incoming and outgoing connections from MCCBs /MCBs and replacing the old unserviceable gland, lugs, nuts &bolts, push buttons, indicating lamps, supporting insulators etc, and checking the serviceability of MCBs cables and earth continuity conductor including replacement of worn out and unserviceable minor accessories all as specified and directed 174 M&L for Replacement of unserviceable DOL Starter suitable for motor up to 5 HPincluding connections 175 M&L for Repairing the old Valve pit of dimension 60x45x45 cm by taking out plaster and rendering with 10mm thick CM(1:4) including PCC (1:3:6) TYPE C2 on base, brick work inCM (1:4) as required and applying two coats of white wash on plastered surface including applying two coats of synthetic enamel paint over one coat of red oxide primer over steel surfaces after preparation, complete all as specified and directed 176 M&L for painting pump set including preparation old surfaces and painting with two coats of synthetic enamel paint over a coat of red oxide primer including marking the signs, letters, Nos on the pump setof capacity up to 2HP all as specified and as directed. 177 M&L for painting of old painted GI pipe of any size on the external surfaces after preparation, located in and out of Pump House, by scrapping and cleaning of external surfaces and applying two coats of Sky Blue paint over a coat of red oxide primer complete all as specified and directed. 178 Dismantling , taking out complete burnt winding wire of submersible motor including cleaning of statorslots replacement of defective parts and rewinding with existing type & gauge ofcopper wireas per motor capacity and using new insulation material such as insulating paper sleeves etc. replacement of submersible cable as required length complete all as directed of rating 1.5/2HP Single phase 179 Repairs to leakage /damaged G.I. pipe of size 80 to 100mm bore including necessary excavation, returning, filling in removal/ pump out the line water cutting out GI pipes at both ends replacement ofGI Pipe and jointing with new fittings accessories such assockets, tees, reducers, Nipples, Bends etc. all asdirected by Engr- in- charge. Note:- (i) G.I. pipe length will be measured and paid separately under relevant item of sch A 180 Material Labour for fixing Mechanical joint suitable 80 mm dia GI pipe, fabricated and made out of MS sheet of thickness 6/8 mm including welding work, rubber gasket, nuts, bolts and washers complete all as specified and directed by Engr in charge. 181 Comprehensive Maintenance, Servicing and carrying out periodical service to DG set along with AMF panel or standard panel like carry out oil service and routine checkup/maintenance as per manufacturers schedule, checking complete system of lubrication, cooling systems, air intake systems, fuel systems, exhaust systems, DC/AC electrical systems in DG Set as well as in AMF/Standard Panel, tightening bolts and nuts in engine and alternator related systems, etc and repairs including material for renewal/ replacement of minor defective parts of like connectors, MCBs , phase indication lamps etc for following capacity of DG sets all as specified and directed by Engr in charge. 182 35 KVA with AMF Panel installed at 14 ASC, AF Kakkanad 183 20 KVA with AMF Panel installed at 14 ASC 184 Note:The spares to DG Sets items as listed below as SUPPLY ONLY will be used whenever required only and it shall measured and paid separately under respective items. 185 The rate is inclusive of all items as required at site except those items as SUPPLY ONLY below to keep the DG Set along with AMF / Standard panel on monthly basis complete all as specified and as directed by Engr-in-Charge. 186 The contractor should attend any complaint / breakdown immediately on call basis and even no. of times without any extra cost. 187 Contractor should submit the inspection / maintenance report of every visit in spite of no of visits during breakdown calls including mentioning the status of DG Sets and spares any replaced 188 The old unserviceable spares replaced under comprehensive maintenance i.e. in sl No 02 of above BOQ is the property of contractor for which credit shall be deducted under respective items in schedule of credit. 189 All AMF panels and standard DG set panels should be well cleaned with CTC solution checking all the electrical connection and tighten for any loose connection. 190 Supply and replace of heavy duty diesel engine oil of 20W40 grade for DG Sets having capacities varying from 15 KVA to 35 KVA complete all as specified and as directed. 191 Supply only Lub Oil Filter for DG set 15 KVA to 35 KVA 192 Supply only fuel filter forDG set 15 KVA to 35 KVA 193 Supply only Oil pressure gauge for DG set of any size/make 194 Recharging of Battery 12 Volts , up to180 AH any make / type by replacing electrolyte including replacement of unserviceable terminal posts , to the required standard complete all as specified andas directed . 195 Diesel hose of size 5/16 all as directed 196 Battery terminals one end socket and the other end clamp type including brazing work and applying jelly over the battery terminal and pole all as directed by the Engr in charge 197 Water hoses complete set of engineDG sets of cap 15 to 35 KVA 198 Repairs to 12 V self starter of DG set engine by dismantling, removing and replacing the old defective/worn-out bearings, servicing including replacement of carbon brush, bendix drive, cleaning commutator in armature etc assembling and testing for satisfactory function all as directed. 199 Supply only auxiliary contactor suitable for AMF panel of 15 to 35 KVA DG set 200 Supply only power contactor suitable for AMF Panel of 15 to 35 KVA DG set 201 Supply, install, testing & commissioning in repairs DC relay card/ PLA relay 12/24 volt DC for DG set any capacity including making all electrical connections and checking by running the DG set for 02 hours complete all as specified and directed by Engr-in Charge, 202 Supply and mixing water coolant in radiator water of DG Sets having capacities varying from 15 KVA to 320 KVA complete all as specified and as directed. 203 Repairs to door of acoustic enclosure of DG set cap 20 KVA by taking down and replacing the door hinges and door lock including all M&L and as directed. 204 Supply only distilled water into battery capacity of 12/24 Volt 88/90/180 AH all as specified and as directed by Engineer-in-Charge. 205 Taking out old burnt out Automatic voltage regulator from DG setcapacity 15 KVA to 35 KVA alternator and replace with new AVR and includingtesting and checking voltage regulation ofthe DG set on full loadfor its satisfactory performance complete all as specified and directed by Engineer-in-Charge:- 206 M&L for dismantling of complete radiator assy for DG Set capacity 15KVA to 35 KVA from engine and taking out all, de scaling rusty, sludge and muddy particles inside the radiator by using of sodium hydroxide with water pressure cleaning complete, changing of radiator fan belt if required and re-fixing the radiator assy on its existing position and testing complete for its satisfactory performance with entire satisfaction of Engineer-in-Charge:- 207 M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm buried directly in ground level with top edge of earth plate at a depth not less than 1.5m below ground level connected to and including galvanized iron strip 25mm x 4mm as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No. 3 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock, PCC (1:3:6) type C-1 earthing chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforced with welded steel wire babric (APM) weight not less than 4 Kg/ Sqm, funnel with GI watering pipe of 20mm bore medium grade, wire mesh and lugs, GI protection pipe of 40mm bore medium grade 7.5 m long test point etc complete all as specified and as directed by Engr-in-Charge. 208 Providing and fixing 25mm x 5mm G.I strip in 40 mm Dia G.I pipe from earth electrode including connection with G.I Nut, bolt, Spring, Waher excavation and refilling etc. as required. 209 Supply & Fix in replacement MCB SP 6 - 32 Amp, C-curve, 415 volt AC complete all as specified. 210 Supply & Fix in replacement MCB SPN 6 - 32 Amp, C-curve, 415 volt AC complete all as specified. 211 Supply & Fix in replacement MCB TPN, 40 -63 Amp, C-curve, 415 volt AC complete all as specified. 212 Supply & Fix in replacement AMF controller, three phases, 50 Hz, AC, auto/manual/test/off mode with necessary display complete all as specified. 213 Material & Labour for dismantling the alternator of DG Set of capacity 20 KVA to 75KVA from its base by using chain and pulley after removing the coupling with the engine, removing all nut, bolt with washer and all electrical connection of the alternator, shifting the alternator to workshop by crane and vehicle, opening into parts, checking all winding like main stator/rotor winding, exciter stator/rotor winding. Rewinding the main rotor and exciter rotor by using the “F” class insulation and existing gauge and type of magnet wire which was on original motor, varnishing, heating, drying, greasing the bearing including replacement unserviceable bearing ,re-fixing the complete including connection to the terminal box of the alternator at workshop and shifting the same to the site, fixing the alternator to its base carefully by using chain and pulley, connecting it with existing engine including checking the alignment of alternator with engine connecting all electrical connection of the alternator and testing the DG set “OFF/ FULL LOAD” , matching to the existing range of RPM of the engine output voltage for 415 volt and testing complete all as per the direction of Engineer In Charge. 214 Material & Labour for taking down unserviceable heat insulation from exhaust piping and providing new heat insulation to exhaust pipe using 50 mm thick mineral wool inside the container & up to the exhaust stack. The insulation shall be cladded/ covered with 24G aluminium sheet. Pipe length shall be maximum up to12 Meter long from engineincluding necessary welding works, cladding works with wire mesh and aluminium foil, replace unserviceable supporting MC,angle iron 50 mm X 50 mm X 6 mm, suitable size flange, nut, bolt and washers as required includingweather cowl complete all as specified. 215 Material & Labour for dismantling carefully fuel injection pump (FIP) up to 6 cylinders engine of DG set and transporting to workshop, opening into parts, for maintenance, servicing, overhauling, tuning and calibration, adjustment of nozzle pressure and other controls, replacement of unserviceable spares, re-assembling, re-fixing the FIP on its original position including to and from conveyance charge from site to workshop and back complete all as specified. 216 Material & Labour for dismantling exhaust manifold from the engine to detect the smoke leak, clean the manifold including welding works, replacement of unserviceable spares, packing, bellows, nut, bolt, washers, insulators, etc. reassembling and re-fixing on its base, testing by running the DG set No LOAD/FULL LOAD complete all as specified. 217 S&F in repair 1.5 Sqmm three core PVC insulated, unsheathed multi stranded copper conductor flexible cable 1100 volts grade complete all as specified and directed by Engr in Charge. 218 M&L for preparation of old paintedsurfaces of the DG set and fuel tankof following capacity by cleaning oily and greasy spots using CTC and material and labour for one coat of synthetic enamel paint using spray machine to the fuel tank and one coat of heat resistance paint to Engine / alternator complete all as specified and directed. 219 Note: - Colour code to be followed as under:-(i) Engine body - OG.(ii) Alternator - Siemens grey(iii) Fly wheel guard - Red(iv)Radiator -Black(iv)DG set canopy/complete body with two coats of superior qualitysynthetic enamel paint using spray gun (Area of painting not exceeding 3 sqm) including writingof incoming/outgoing feeder with letters, MES/SM Nos etc completeall as specified. For DG Set capacity 15 KVA to 35 KVA 220 M&L for disconnection of Diesel Oil tank with inlet and outlet diesel pipe line hose/pipe and cleaning of complete oil tank and drain out slug, muddy oil particle complete and re-fixing after at the same place and connecting complete with existing system including marking of tank showing the capacity in Ltrs and replacement of transparent PVC pipe complete all as directed by Engineer-in-Charge:-For DG Set capacity15KVA to 35KVA 221 Supply, install, testing & commissioning in repairs controller- Procom DGC-6D Auto Mains failure control Module including Display, replacing contactors/Connectors and making all electrical connections good and renewed for up to DG set 35 KVA as per existing make complete all as specified and directed by Engr-in-charge. 222 M & L for Servicing of split type Air-conditioning unit comprising Indoor and Outdoor unit of any make/type having capacity 1.0/1.5/2 TR including attending breakdown including required tools and plants,minor electrical sparer like small piece of wire, insulation tape , screws required to rectify the complaints by replacing the spare partsin technical andresidentialbuildingat 14 ASC Kakkanad. Note: Spares required is measured and paid as respective items in Schedule A and all specified and directed by the Engineer - In - Charge. 223 Supply and charge refrigerant gas R-32/R-410 at site including testing all as specified and as directed by Engineer in charge . 224 Supply only Capacitor 36/40 MFD suitable for 230 V 50 HZ AC supply all as specified and as directed by Engineer in charge. Make: USHA / ASIAN / TESLA / EPCOS/ L & T/Keltron) 225 Supply only Capacitor 50/60 MFD suitable for 230 V 50 HZ AC supply all as specified and as directed by Engineer in charge. Make: USHA / ASIAN / TESLA / EPCOS/ L & T/Keltron) 226 Supply only Capacitor 80/100MFD suitable for 230 V 50 HZ AC supplyall as specified and as directed by Engineer in charge . Make: USHA / ASIAN / TESLA / EPCOS/ L & T/Keltron) 227 Taking out existing burnt fan motor single phase 230 Voltfrom the unit at site by carefully dismantling the same, taking out burnt copper winding and rewinding the same with super enameled copper winding wire of appropriate size and gauge, including replacement of defective bearing and bushes of existing size and standard make including varnishing to copper winding re-assembling the motor and testing the motor at medium and full load complete for the followingall as specified and as directed by Engineer - in - Charge. 228 Splittype AC capacity up to 1.5 Ton 229 Split type AC 2.0 Ton Capacity 230 Taking out old unserviceable PCB and replace the same with new PCB at site suitable for window/split type AC of capacity 1/1.5/2 TR all as specified and directed by Engg-in-charge 231 Taking out carefully existing defective sealed unit compressorSupply & fixing factory made rotary type sealed compressor unit same as per existing model and make including charging the gas and testing & commissioning under normal condition of following rating complete all as specified and directed by Engineer - in - Charge. 232 (a) Split type Ac 1.5/2.0 Ton capacity 233 Removing the damaged insulation of suction and discharge line & Supplying and fixing new Thermal sleeve insulation for suction line and discharge line including providing hard plastic tape over the thermal insulation of split type A/C 1.5 / 2.0 Ton capacity etc complete all as directed by Engineer - in - Charge. 234 M&L in replacement of old unserviceable remote by providing new remote suitable for window type/ split type AC of any capacity/any make as specified and directed by Engineer in Charge. 235 Supply only new capacitor of Fan motor of 4 MFD complete all as directed by Engineer - in - Charge. Make: USHA / ASIAN / TESLA / KELTRON / KEIL/ EPCOS. 236 Supply only new capacitor of Fan motor of 10 MFD complete all as directed by Engineer - in - Charge. Make: USHA / ASIAN / TESLA / KELTRON / KEIL/ EPCOS. 237 Suply only split type AC indoor unit oscillation motorcomplete all as directed by Engineer - in - Charge. 238 Supply only thermostat for split type AC 1.0/1.5/2.0 complete all as directed by Engineer - in - Charge. Make: INDFOSS / RANTROL / ANNAPURNA. 239 Supply & fix in replacement of factory made MS bracket or Stand duly painted suitable for outdoor unit of split AC including making good disturbed surfaces etc. , all as specified andas directed. 240 M & L Removing the split A/c unit from existing position, of capacity 1.5/2.0 Ton of any make and refix the same in other location by fixing the indoor and outdoor unit in position on fixing on wall/ floor as directed including piping refix the insulation, Gas charging filling the cavities on wall setting of grills alignment complete including, testing & commissioning to the entire satisfaction of Engineer - in - Charge. 241 Supply and fixreplacement 240V 20 Amp singlepole and earth enclosure with a two pin and earth plug and socket complete with one single poleMCB20 Amp SPAll as directedEIC .Make: Legrand , Cat No: 6078 41/Equivalent in L & T/Indo Asian. 242 Taking down the old sub main wiring and M/L for new sub main wiring with 2 run single core 4.0 sq mmPVC unsheathed copper multi stranded, FRLS conductor drawing into and including PVC conduit medium grade of size not less than 20 mm dia with all fittings and fixtures like L- bow, saddles etc of white/lvorycolour PVC conduit including multi stranded copper earth conductor 4.0 sq mm one run as earth continuity conductor all as directed by Engineer in Charge. 243 Supply and fixing in replacement of LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. Make: Havells Cat Part No ENDURAPEARLNEOSL45LED757PASYTOPC or its equivalent make of Crompton/Bajaj/HPL/GM. 244 Supply, fixing, connecting and testing in replacement of 150 Watt LED flood light 230 Volt AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Make: Havells Cat No JETAIRISFLS150WLED757PSYMLTG or its equivalent make of Crompton/GM/HPL. 245 Supply and fixing in replacement to ground with suitable pole mounting with OD of 76 mm, connecting and testing 40 Watt LED Post Top Luminaire, 230 Volt AC outdoor type with decorative post top for 360° indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Make: Crompton Cat Part No LPTO-40-CDL/M or its equivalent make of Havells/Bajaj/GM/HPL. 246 Supply and fixing passing through pole cable 3 core PVC insulated unsheathed multi stranded copper conductor of size 2.5 Sqmm from junction box to lightfitting all as directed by EIC. Make: Havells/Finolex/Poly cab. 247 Supply & fixing in replacement of transparent cover type street light junction box of size 168 mm x 253 mm x 115 mm made of high quality thermoplastic type with hinged and 4 Nos DIN mounted terminal suitable for 10 Sqmm XLPE cable, IP-66 (Dust and power jet Proof according to IEC 60529) , shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated (Class II ) made of halogen and silica free recyclable material, UV resistant having high grade gasket made of poly-urethane with copper bus bar 25 x 5 mm -04 strip, one noMCB SP 6 Amps with locking arrangement and 2 Nos M40 size cable gland and one M32 size gland suitable up to, 10Sqmm cable etc and fixing to the street light pole with 02 Nos, 25 x 3 mm thick MS clamps, nuts & bolt, etc. complete all as specified and directed. Make: Hensel Cat Part No KG 9002 or its equivalent make. 248 M & L for removal of existing treatment from PCC poles and applying two coats of weather proof exterior emulsion paint on old painted surface over a coat of primer, complete all as specified and directed by Engineer-in-Charge. 249 M&L for cleaning of feeder pillar/ panel after dismantling the Incoming and outgoing connections from MCBs and replacing the old unserviceable Gland, lugs, nuts & bolts, push buttons, indicating lamps, supporting insulators etc., and checking the serviceability of MCBs, cables and earth continuity conductor including replacement of worn out and unserviceable minor accessories all as specified and directed by Engineer-in-Charge.Note: Spares / materials charge for repair/replacement of worn-out parts shall be measured and paid separately under relevant items. 250 S & F in replacement of MCCB 4 Pole 100-125 Amps 415V 16 KA 251 S & F in replacement of MCB TPN63Amp, 4 Pole, C Curve 252 S & F in replacement of MCB DP 32-40Amp, C Curve 253 S & F in replacement of MCB SP 6 to 32Amp, C Curve 254 Comprehensive Maintenance, Servicing and carrying out periodical service to Voltage Stabilizer, servo type of capacity 63 KVA, 3 phase, 50 c/s, AC including along withrepairing/ replacing of all defective parts such as nut-bolts, washers and all other minor accessories as required at siteall as specified and directed by Engr in charge. Notes: 255 (a) Any additional parts required to be replaced will be measured and paid separately as Supply only against appropriate item of schedule. However labour element and painting involved in replacement are included in quoted rate against this item. 256 (b) Any minor repairs involved to make the voltage stabilizer functional if notified by the Engr-in-Charge shall be carried out by the contractor without any extra cost to the department. (c) Following parts (if renewed) shall be measured and paid separately under appropriate items at Supply only rates and unserviceable parts retrieved through replacement shall be measured under Sch of credit. 257 Disconnecting the complete unit of Servo Controlled voltage stabilizer of capacity 63 KVA, 3 phase, 50 c/s, AC supply of Make- Volteck or as per existing make and overhauling of the same by cleaning, servicing all serviceable accessories including painting with two coats of synthetic enameled paint externally after rubbing of old loose paint along with writing SM No. and capacity on the face of stabilizer and making all connections at both ends including providing lugs on existing cable and testing on full load after completion of repair / overhauling work complete all as specified and directed.NOTE: - (i) Supply only spare parts shall be measured and paid separately under relevant items of this schedule. (ii)Transportation charge / labour charge during the repair of voltage stabilizer from the site to workshop are included in the items of this schedule 258 Supply only following spare parts of 63KVA capacity Servo Voltage Stabilizer complete all as specified and directed: - 259 AC synchronous motor single phase, 50 Hz, 240 volts Make:UNI STEP or equivalent make suitable for volteck servo . 260 Variable auto transformer (Variac). 261 Sensing Transformer. 262 Carbon brush with holder complete. 263 Solid state sensing circuit. 264 RC Net work. 265 PCB connector. 266 Gear big. 267 Carbon fingers. 268 Variac Control CT. 269 Main Bushing with brass rod (insulator & rod). 270 High low cut off relay. 271 Series transformer. 272 Wiring Set. 273 Gear small. 274 Transformers oil filtering with test 275 Replacement of electronic control board 276 Fixing of top cover after repair and testing up to entire satisfaction of Engr in Charge. 277 Supply, installation, testing and commissioning of street light timer control panel, on pole/wall/floor mounting made out of CRCA steel sheet duly powder coated with locking arrangement, including internal wiring complete with bypass arrangements as per manufactures recommendation and design complete all as specified and as directed.Make: Havells Cat Part No IHXTS09120 or its equivalent make of above specification. 278 S&F bracket for fixing to street light poles, made out of suitable dia for fitting of LED street light fittingsmedium grade GI pipe bend to shape inclusive of one primer coat, one under aluminium coat and one aluminium finishing coat of paintall as directed by the Engineer-in- Charge. Make: TATA / Jindal / Surya Praksh. 279 Supply, install, test and commissioning of outdoor type double door LT Feeder pillar box made out of 3.15 mm thick CRCA sheet outdoor type totally enclosed weather dust and vermin proof as per IS , CPRI Approved with front opening suitable locking arrangement having copper bus bar of 300 Amp capacity for RYB and half for neutral and insulated with insulators, including connecting incoming and outgoing cables necessary PCC 1:3:6 in foundation and made out of 50 mm x 50 mm x 6 mm angle iron grouted at ground above 30 cm from ground level comprising of the following etc complete all as specified and directed by Engineer-in-Charge. Note: Cost of necessary internal wiring from bus bar to MCCBs/MCBs/Enclosure connections etc shall be deemed to be included in the unit rate. 280 Incoming:(a) MCCB 200 Amp 4 pole 36 KA Ics=100% of Icu with spreader & rom -01 No. (b) Indication Lamp Red/Yellow - 03 No (c) SP MCB 6A -03 Nos (d) MFM Meter with CT- 01 No (g) Provision for installation of KESB 3 Phase meter with necessary accessories. 281 Outgoings.(a) 125 Amp 4P MCCB 25 KA Ics=100% of Ics with spreader & rom -01 No (b) 100 Amp 4P MCCB 25 KA Ics=100% of Ics with spreader & rom -01 No (c) 63 A 4P MCCB 25 KA Ics=100% of Ics with spreader & rom -01 No.(d) 32 Amp 4 MCCB 16 KA, Ics=100% of Ics with spreader & rom -01 No. 282 M & L for re-filling of chemicals (minimum 25-30 ltrof Bentonite chemical / Graphite compound for each earth pit) in existing chemical earthing at technical area for achieving satisfactory earthing value with comprising of the Bentonitecomponents including necessary excavation/drilling for lift of cylindrical copper tubes from the ground and re-fixing the same by using Rig machine and providingenclosure with heavy duty plastic cover having locking arrangement including changing of electrode with pure copper chemical earthing electrode (length ofRod : 3 mtr Approx) for excellent conductivity & work efficiencycomplete all as specified and as directed.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 9
Kerala View Result →
9.
Public Administrative Department #10766958 Price Bid
ANNUAL TENDER FOR PUBLIC HEALTH SERVICES - MISCELLANEOUS MATERIALS Annual Tender For Public Health Services - Miscellaneous Materials , Disaster Management - Supply Materials , Chain Saw Mechine , Motor Pump Set , Generator 1 Kw , Generator 3 Kw , Generator 5 Kw , Generator 10 Kw , Safety Harness Bult , Mask , Rain Coat , Gumboots , Gloves , Reflective Jacket , Safety Helmat , Disaster Management - Rent , Chain Saw Mechine , Motor Pump Set , Generator 1 Kw , Generator 3 Kw , Generator 5 Kw , Generator 10 Kw , Public Health - Push Chart Services , Push Chartwheel , Push Chart Rotator , Push Chart Push , Iron Plate 6 Kg , L Angle , Painting And Writing , Labour Charges , Public Health - Fogging Maching Services (Out Door) , Valve , Switch Board , New Silancer , Wire , Fule Tank , Tube , Comberser , Tab , Corpenter Materials And Services , Battery , Nri Valve , Public Health - Fogging Maching Services (In Door) , Valve , Tube , Burner , Coile , Service Charge , Public Health - Bathroom Door , Pvc Door , Steel Door , Em Solution And Abet , Emi Solotion , Abet , Mosquito Liquid Materials , Mosquito Liquid -Temephos , Malathion Technical Grade 95% , Pyrethrum , Fogging Gas Cylinder , Acid , Kalaikolli , Outdoor Fogging Machine , Indoor Fogging Machine , Basillus Thuringiensis , Alpha Cyper Methrin , Lambda Cyhalothrium , Megaric Sprayers , Public Health – Thalavadam Miscellaneous Materials , Manvetti , Kadaparai , Iron Pikas With 4 Finger , Kunthalam , Aruval With Handle , Ricemill Gi Bucket , Drainage Cleaning Gi Plate , Drainage Cleaning Agappai , Manvetti, Kunthalam,Pikashandle , Thagaramiron Chatti (Pond) , Moongil Koodai(Big) , Moongil Koodai(Small) , Kootumaru , Bamboo Stick Milar With Handle , Plastic Chatti , Hand Gloves , Gumboot , Rain Coat , Helmet , Mask , Euro Reflective Jacket , 12” Gi Bucket , Plastic Mug , Road Cleaning Brush , Aluminium Anna Koodai , Moongil Thattu , Shovel , Cottoncoat , Cotton Cap , Plastic Anna Koodai , 4 Wheel Pushcart Vehicle , 50 Lit Capacity Pushcartbucket , 200 Lit Capacity Wheeledpushcartbucket
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
10.
Educational and Research Institute #10651592 Price Bid
Supply And Installation Of Lab Equipment Government School Located At Karauli District. Banking, Financial Service , Computer System - Core I3, 7Th Gen., 3.9 Ghz, 4Gb Ram, 1Tb Hdd, Dvd, Usb Drives, Speakers, Keyboard, Mouse, Operating System- Win10, 3 Year Onsite Warranty , Ups - 600 Va, Input 140 / 300 Volts, Bis / Ce Certified. , Work Station - 01 Computer Table ( Size 4’ X 2’ X 2’.6” ) &03 No. Student Chair , Trading Software -Currently Available Educational Software’S For Trading For Class 9-12 Students. ( Multiuser ) , Core Banking Software -Currently Available Banking Software For Educational / Training Purpose For Class 9-12. ( Multiuser ) , Technical Analysis Software -Meta Stock, Falcon Or Currently Available Related Software For Educational Purpose For Class 9-12 Students. ( Multiuser ) , Accounting Software -Tally Or Related Product For Educational Purpose ( Multiuser ) , Networking -Lan To Be Done Using Cat6 Cable 50Mtr, Switch 24 Port, I / O Box-10Nos., 20-Rj45 Connectors, 50 Mtr.Patch Card. , Internet Connection -High Speed Broadband. Bsnl / Airtel / Idea / Jio / Othres Any As Per Availability ) , Writing Board With White Board Marker And Duster -6’ X 4’ White Board, 4 Color White Board Marker In A Pack Of 10 Each Color, 01 Duster , Projector -Portable Projector Hdmi Interface, 3300 Lumens, 50 Watts, Screen Resolution: 1024 X 768, Connector Type: Usb, Hdmi, Vga- Weight Around 2.4 Kg Approx. , Projector Screen - Projector Screen In 4:03 Ratio Aspect, Ultra Hd & 4K Technology, 3D Active Projector Screen 120-Inch 8Ft. ( W ) X 6 Ft. ( H ) , Multimedia Speaker 2.1-Any Good Brand 40 Watt Rms ( Subwoofer - 20W + Satellite - 10W X 2 ) , 2.1 Multimedia Speaker With Bluetooth And Multiple Playback Options – Bt / Usb / Sd / Aux, Weight Around 2.5 To 3 Kg. , Electrical Work ( Includes Isi Wiring And Fitting ) 1- Mcb 32 Amp Fixing Of 01No. 2- Power Point With 3 Socket Per Board Fixing Of 04 Board Per Lab. 3- Ceiling Fan - 02 Nos. Includes Wiring And Fitting. 4- Exhaust Fan- 01 No. Includes Wiring And Fitting. 5- Tube Light 03 Nos. With Complete Fitting And Fixtures. , Laser Printer - Function-Print / Copy / Scan, Cartridge Facility, 2400X600 Dpi, Mono Print Resolution / Duplex, 2 Side Copy, 30Ppm , Air Conditioner ( Ac 1.5 Ton / 2 Ton Depending On The Room Size ) - Split Ac With Inverter, With 4 Star Energy Rating, 5 Year Warranty In Total And 5 Years Separate Warranty For Compressor. , Fire Extinguishers - 1 Co2 Type Fire Extinguisher For Electrical Equipment’S, Minimum 4.5 Kg, 1 Abc Type Fire Extinguisher For Lpg, Minimum 4.5 Kg , Frist Aid Kit - Must Contains All Major First Aid Accessories: Crepe Bandage , Adhesive Bandage, Adhesive Bandage Round, Pain Relief Gel, Povidone Iodine Ointment, Oral Clinical Thermometer, Antiseptic Liquid, Absorbent Cotton I.P., Micro Porous Surgical Tape, Paracip / Parachoice, Gauze Swab, Roller Gauze, A Pair Of Scissors, First Aid Leaflet Sticker
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 1
Rajasthan View Result →
11.
Health and Family Welfare #10577118 Price Bid
Tender For Rate Contract For Iec Materials And Installation-- 1 Flex with iron framing - Flex multicolour +B13:B206printing (13oz) with iron framing - 4X6 ft. 2 Flex with iron framing with installation at site - Flex multicolour printing (13oz) with iron framing, installation at site - 4X6 ft. 3 Flex installation at site - Flex multicolour printing (13oz) with, installation at site - 15x9 ft. 4 Permanent Hoarding- Iron board with 5Qnti. Weight with Multicolour Flex Specification-Channel-05, Angle-1.5 Outerside with Iorn sheet, rust free, Size -15x9 Fixing with Good quality cement. - 15x9 ft. 5 Permanent Hoarding- Iron board with 1 Qnti. Weight with Multicolour Flex Specification-Channel-04, Angle-1.5 Outerside and one in between,Iorn quality-rust free, Size -15x9 Fixing with Good quality cement. - 15x9 ft. 6 Flex - Flex multicolour printing with Four Eyelet (13oz) - 5x3 ft. 7 Flex - Flex multicolour printing with Four Eyelet (13oz) - 2x3 ft. 8 Poster - Paper-180 GSM, Art Paper, Multicolour Printing single side - 2x2.5 ft. 9 Poster - Printing Multicolour, Paper-160 GSM , ART Glossy. single side - 2x3 ft. 10 Poster - Multicolour ,130 GSM , ART Paper single side, 75 Guming tape in top and bottam on back - 16.54X23.39 11 Handbill - Multicolour, ART Paper-100 GSM, both side print.- 8.25X11.75 inc 12 Pumphlet - Maplitho Paper, Single side colour printing - A4 Demy 13 Leaflet - Art paper, mid fold, multicolour printing both side 130 GSM - 8X11.2 inc 14 Wall Writing - Multicolour Oil Painting - 4X3 ft 15 HBNC Cards & Formats - Inside 68 Page(Maplitho paper,colour pages,70 GSM) Cover 4 Pages (Art Glossy Paper,Multicolour Printing Stapler Binding - A4 16 HBYC Refer,Visit & Reporting format Booklet - Inside 70 Page(Maplitho paper,colour pages,70 GSM) Cover 4 Pages (Art Glossy Paper,Multicolour Printing Stapler Binding - A4 17 VHSNC Meeting Register - Inside 66 Page(Maplitho paper,colour pages,70 GSM) Cover 4 Pages (Art Glossy Paper,Multicolour Printing Stapler Binding - A4 dimmy 18 Sahiya Dairy - Inside 112 Page(Maplitho paper,colour pages,130 GSM) Cover 4 Pages (Art Glossy Paper,Multicolour Printing Stapler Binding - A4 19 CBAC Format booklet - Inside 112 Page(Maplitho paper,colour pages,130 GSM) Cover 4 Pages (Art Glossy Paper,Multicolour Printing Stapler Binding - A4 20 Opinion from (CAC) for trained Doctors (50 sheet book) - Paper: 80gsm Printing: Single Color Cover and back: Printed cover page and hard Back with bill book binding page: 50 sheet with perforation of top. - 8X 11.2inc 21 Consent from (CAC) (100 sheet book) - Paper: 60gsm sunshine Printing: Single Color Pages:100 sheets Fabrication: Staple on the top of the pad Cover.- 7x8.5inc 22 Admission register CAC 100 pg register - Paper: 80gsm sunshine Printing: Single Color Cover and back: Hard bound (cardboard) with Printed cover sheet. Printed Separated attached to back cover. Page: 50 set of (1+1) with a carbon sheet in between. 2nd page perforated. Binding: bill book binding: (sideways stapled and tapped on the top) . - 8.5X1 inc 23 Death Register MDR (Book of 50 Pages) - Paper: 60 gsm Printing: Single Color Cover and back: Printed cover Page and hard bound (Cardboard) Back with bill book binding Page: 50 sheet with perforation on top. - 8X11.25 inc 24 Maternal death Notifiation format (Book of 50 Pages) - Paper: 60 gsm Printing: Single Color Cover and back: Printed cover Page and hard bound (Cardboard) Back with bill book binding Page: 50 sheet with perforation on top. - 8X11.25 inc 25 MDR Investigatiing formats FBMDR(Book of 50 Pages format each) - Paper: 60 gsm Printing: Single Color Cover and back: Printed cover Page and hard bound (Cardboard) Back with bill book binding Page: 14 Pages on one set 20 set in one book, with perforation on top. - 8X11.25 inc 26 MDR Investigatiing formats CBMDR(Book of 50 Pages format each) - Paper: 60 gsm Printing: Single Color Cover and back: Printed cover Page and hard bound (Cardboard) Back with bill book binding Page: 13 Pages on one set 20 set in one book, with perforation on top. - 8X11.25 inc 27 Discharge Slip (As per MNH Tool kit) - Paper: 60 gsm Printing: Single Color Cover and back: Printed cover Page and hard bound (Cardboard) Back with bill book binding Page: 50 sheet, with perforation on top. - 8X11.25 inc 28 Labour room register. - Paper: 90 gsm maplitho Back Cover hardboard 300gsm, front cover art paper 180 gsm, back ground: sky blue and ma color, Alphabet and NumberL blackcolor.Hindi Version and English Version Pages: 100 Pages. - 39.5X25 cm 29 MAA training module for ANM & Doctor, Shayia booklet at districts livel - 36 Paper (34 inside & 4cover page) Paper 190 GSM art. Glossy inside, 250 GSM cover pages art Glossy. Both side multicoloured printing. Binding-Centeral stich.- 29.5X20.5cmc 30 Canopy - Lower Cover Area-2.5, Upper cover-1, 3 side mid open with iron frame - 7X4ft 31 Mamta wahan call Centre Register - Cover - 2 pages (220 GSM Art Paper Multicolour) Inside 100 Pages, 100 GSM, Maplitho binding, Printing B/W, binding -Glue and stitch - 45X30 cm 32 Mamta wahan reporting format - Printing B/W. Paper-100 GSM, Maplitho, binding Glue, Pre formatted, 100 pages in one book - 32X22 cm 33 Temperature Log Book ILR/DF - Total Pages-44, Pages-40 pages-inside-80 GSM white Maplitho paper, Cover-4 pages-250 GSm, Two Colour, Art Paper with lamination. Fabrication- Eyelet one side with tag/ art board Binding-side binding-centre stictch (See Sample) - 8.3X11.7 inc 34 Planned Preventive Maintenance - Total Pages-80, Pages-76 pages-inside-80 GSM white Maplitho paper, Cover-4 pages-250 GSm, Two Colour, Art Paper with lamination. Fabrication- Eyelet one side with tag/ art board Binding-side binding-centre stictch (See Sample) - 8.3X11.7 inc 35 Standard Indent forms - Paper-first paper white, colour printing (dyme) paper-70 GSM-perforated, Duplicate paper-50 GSM, pink colour printing paper. - 9.0x6.4 inches 36 Duelist cum Tally Sheet - Total Pages-200, Binding-staple, Cover 4 pages 1300 GSM, Art Paper multicolour printing. Inside 1 sheet both side & 25X3 =75 sheet duly perforated 80 GSM Maplitho paperBounded, - 11x8.5 37 Flex Banner on Immunization schedule at HSC and AWC - Duly Multicolour printed 13 oz Flex (with eyelets on four corners) - 4X3 ft 38 AFP/ Measles Reporting Booklet - Total Pages-114, 70 GSM, Maplitho Paper, Frunt and Black colour-light pink-2 pages weekly calender-white-1pages, foreward letter- white -1 pages, light green-2 pages, light pink 2 pages, white-53 pages, yellow 53 pages (seen Sample) - A4 Dimmy 39 MTC Register - No. of pages- 114, Paper -80 GSM Maplitho, Colour 1+1, cover-Multi colou, art paper 130 art paper, pasting on Hard Board- 11.75X16.5 inc 40 Monthly HMIS format (HSC) - Pages-6+6 pages(One page B/W, Duplicate yellow colour page)=12 pages in 1set printing -single colour, one side Binding-Gum binding (Pad type) on head side with Brown paper cover. Uniform coding on one format. Paper-Maplitho 80 GSM. Each pad 12set of format. Total 144 pages in a set.(Seen Sample) - A4 41 HMIS format (PHC) - Pages-8+8 pages(One page B/W, Duplicate yellow colour page)=16 pages in 1set printing -single colour, one side Binding-Gum binding (Pad type) on head side with Brown paper cover. Uniform coding on one format. Paper-Maplitho 80 GSM. Each pad 12set of format. Total 192 pages in a set.(Seen Sample) - A4 42 HMIS format (CHC) - Pages-8+8 pages(One page B/W, Duplicate yellow colour page)=16 pages in 1set printing -single colour, one side Binding-Gum binding (Pad type) on head side with Brown paper cover. Uniform coding on one format. Paper-Maplitho 80 GSM. Each pad 12set of format. Total 192 pages in a set.(Seen Sample) - A4 43 Posters - Multicolour printing on 300 GSM Art paper with Back strip adhesive with release paper - A4 Dimmy 44 Cards - Page- one leafs, paper -90 GSM, Maphlitho paper, printing - front side one colour and back side two colour printing. Total pages 200/per pad (seen Sample) - 21 cm X 15.5 cm 45 Medical Record cheklist + Consent Form - Page : 80 GSM Maplithoi Back to back print single colour with 2 staple binding pages : 10 - 1/4 demy 46 RMNCH Counselor Register- Paper : Leadger Paper Light Green 75 GSM 250 Pages approx Single colour printing back to back Stitch type perfect binding Cover : Front & Back 250 century Chart Paper with Multicolour print on Cover 1 - 29x41 CM 47 Frequently Asked Question - Pages- 32, including 4 cover pages, Printing - Multicolour , Paper -inside-170 GSM Art Paper Cover - 250 GSM, Art Glossy. Binding - Staple with Glue. - 28x19.5 cms 48 Post Abortion Famly Planing - Technical Update - Pages- 28, including 4 cover pages, Printing - Multicolour , Paper -inside-170 GSM Art Paper Cover - 250 GSM, Art Glossy. Binding - Staple with Glue. - 28x19.5 cms 49 Post Abortion Reference Manual - Pages- 28, including 4 cover pages, Printing - Multicolour , Paper -inside-170 GSM Art Paper Cover - 250 GSM, Art.- 28x19.5 cms 50 Reference Manual Injectable Contraceptive - Pages- 114 including 4 cover pages, Printing - Multicolour , Paper -inside-170 GSM Art Paper Cover - 250 GSM, Art. Glossy. Binding - Staple with Glue. - 29 X21 cms 51 Reference Manual Oral Pills - Pages- 114 including 4 cover pages, Printing - Multicolour , Paper -inside-170 GSM Art Paper Cover - 250 GSM, Art. Glossy. Binding - Staple with Glue. - 29 X21 cms 52 Standard and Quality Assurance- Pages- 122 including 4 cover pages, Printing - Multicolour , Paper -inside-170 GSM Art Paper Cover - 250 GSM, Art. Glossy. Binding - Staple with Glue. - 29 X21 cms 53 Medical Eligibility Criteria (MEC) English - Pages- 210 GSM Art Board Printing both side Multicolour (with two fold). Inside two wheel both side printing- Paper -inside-170 GSM Art Paper Glossy.Seen the sample- 50x20 cms 54 Medical Eligibility Criteria (MEC) Hindi - Pages- 210 GSM Art Board Printing both side Multicolour (with two fold). Inside two wheel both side printing- Paper -inside-170 GSM Art Paper Glossy.(Seen the sample)- 50x20 cms 55 Leaflet for Sahiya - Pages- 4, both side printing, Printing Multicolour Paper -170 GSM, Art Paper Glossy.One fold mid. - A4 Demmy 56 Leaflet/pamphlet for Client of FP & Newer Conrtaceptives - Pages- 4, both side printing, Printing Multicolour Paper -130 GSM, Art Paper Glossy.One fold mid. - A4 Demmy 57 Follow Up Card Male/ Female - Century Chart Paper 280 GSM Single colour Print 4 pages - 1/10 demy 58 Male / Female Sterlization Certificate - Multicolour Print on 260 GSM Century Chart Paper - 1/4 demy 59 PPIUCD Insertion Register - Paper : Maplitho 80 GSM , Inside Pages-250, Cove -4 Pages. Single Colour Printing Back to Back (B/W) Cover : Front & Back Hard Kut with duly bind -250 GSM- 12.5x19.5 inch 60 PPIUCD Follow Up Register - Paper : Maplitho 80 GSM , Inside Pages-250, Cove -4 Pages. Single Colour Printing Back to Back (B/W) Cover : Front & Back Hard Kut with duly bind -250 GSM- 12.5x19.5 inch 61 IUCD Insertion Register - Paper : Maplitho 80 GSM , Inside Pages-250, Cove -4 Pages. Single Colour Printing Back to Back (B/W) Cover : Front & Back Hard Kut with duly bind -250 GSM- 12.5x19.5 inch 62 IUCD Follow Up Register - Paper : Maplitho 80 GSM , Inside Pages-250, Cove -4 Pages. Single Colour Printing Back to Back (B/W) Cover : Front & Back Hard Kut with duly bind -250 GSM- 12.5x19.5 inch 63 Sterilization Register - Paper : Maplitho 80 GSM , Inside Pages-250, Cove -4 Pages. Single Colour Printing Back to Back (B/W) Cover : Front & Back Hard Kut with duly bind -250 GSM- 12.5x19.5 inch 64 PAIUCD Register - Paper : Maplitho 80 GSM , Inside Pages-250, Cove -4 Pages. Single Colour Printing Back to Back (B/W) Cover : Front & Back Hard Kut with duly bind -250 GSM- 12.5x19.5 inch 65 Injectable Register - Paper : Maplitho 80 GSM , Inside Pages-250, Cove -4 Pages. Single Colour Printing Back to Back (B/W) Cover : Front & Back Hard Kut with duly bind -250 GSM- 12.5x19.5 inch 66 IUCD Follow Up Card - Paper : 280 GSM Art. Paper Multicolour Print Both sides. - 1/4 demy 67 Handbook for Screening RBSK Children visible birth defects at delivery Point - 89 Pager Including 4 Cover Pages 2 side 130 GSM Art Paper Cover- 210 GSM Art. Paper with Lamination Multicolour Printing Binding- With Proper gum and Staple Binding - 30 X 21 cm 68 Screening Sheet - Paper- Maphiltho Paper 80 GSM Printing- Two Colour (B&W) Both Side Print - A4 dimmy 69 Referal Form- Paper- Maphiltho Paper 80 GSM Printing- Two Colour (B&W) Both Side Print 100 GSM, Art Paper, Multi Colour Printing - 17x22 inc 70 Poster - 100 GSM, Art Paper, 8 Pages Multicolor page. - 14x22 cm 71 Swasthya Karyakarta Guide, Leaflet - 170 GSM, Art Paper, 8 Pages Multicolor page. - 14x21cm 72 Hand Bill - 60 GSM, Art Paper, Multicolor page size - 1/8 dimmy 73 Flex Banner - Multicolour (13OZ) - 5x3 ft. 74 Poster - 170 GSM, Art Paper, Multicoluor printing. - 2x1.5ft 75 Pamphlets - 170 GSM, Art Glossy Paper, Multicoluor printing both side with two fold. - 18x9 inch 76 Anti Tabacco Poster - Multicolour, Art Glossy Paper 170 GSM Single Side Printed. - 2x3 feet 77 Signages - Vinyl pasting on Sunboard, Multi colour Printing with installation at different sites. - 1 sqr feet 78 No Smoking Zone Signages - Vinyl pasting on Sunboard, Multi colour Printing with installation at different sites. - 60x45 cms 79 Family Folder - 350 GSM, Art Glossy (Folder type mid fold)- nside - Behind both side paper bag paste half of folder - 350 GSM, Art Glossy. printingMulticoluor- 19x12 inc 80 Personal helath record card communityc based.- Booklet page -4 Pagers (One mid fold) printing three type of Booklet.. Ex.- Three different booklet-4x3=12 pages Paper -170 GSM, Art Paper. Printing-Multicoluor both side. - A4 Demmt 81 Miking - Miking with Auto Rikshaw equiped with sound System - Medium Sound 82 Nukad Natak - 5 Members Team with 50 % Female member with Four Wheller Vehicle and sound system - Outsatanding 83 Formats Printing - A4 Size Black & White, Maplitho - A4 84 MPA Card - 2 Pageer, both side print, Perforated on portion. Paper- 170 GSM, Art paper. Printing- Multicolour. - 25x35 cms 85 Frequently Asked Question - Pages-32, including 4 cover pages, Printing- Multicolour, Paper-Inside- 170 GSM, Art. Paper, cover-250 GSM, Art Glossy. Binding- Stapal with Glue. - 28x19.5 cms 86 Post Abortion Family Planning- Technical Update - Pages-28 including 4 cover pages, Printing- Multicolour, Paper-Inside- 170 GSM, Art. Paper, cover-250 GSM, Art Glossy. Binding- Stapal with Glue. - 28x19.5 cms 87 Post Abortion Reference Manual - Pages-28 including 4 cover pages, Printing- Multicolour, Paper-Inside- 170 GSM, Art. Paper, cover-250 GSM, Art Glossy. Binding- Stapal with Glue. - 28x19.5 cms 88 Reference Manual Injectable Contraceptive - Pages-114, including 4 cover pages, Printing- Multicolour, Paper-Inside- 170 GSM, Art. Paper, cover-250 GSM, Art, Glossy. Binding- Stapal with Glue. - 29X21 cms 89 Reference Manual Oral Pills - Pages-114, including 4 cover pages, Printing- Multicolour, Paper-Inside- 170 GSM, Art. Paper, cover-250 GSM, Art, Glossy. Binding- Stapal with Glue. - 29X21 cms 90 Standards and Quality Assurance- Pages-122, including 4 cover pages, Printing- Multicolour, Paper-Inside- 170 GSM, Art. Paper, cover-250 GSM, Art, Glossy. Binding- Stapal with Glue. - 29X21 cms 91 Medical Eligibility Criteria (MEC) English - Pages-210 GSM Art Board, Printing both side Multicolour (with tow fold). Inside two wheel both side printing - paper - 170 GSM Art paper glossy. (seen the sample) - 50x20 cms 92 Medical Eligibility Criteria (MEC) Hindi - Pages-210 GSM Art Board, Printing both side Multicolour (with tow fold). Inside two wheel both side printing - paper - 170 GSM Art paper glossy. (seen the sample) - 50x20 cms 93 Senhi Dampati Booklet for Sahiya - Pages-28, including 4 cover pages, Printing- Multicolour, Paper-Inside- 130 GSM, Art. Paper, cover-200 GSM, Art, Glossy. Binding- Stapal. - 21x15cms 94 Leaflet for Sahiya - Pages-4, Both side printing. Printing- Multicolour, Paper-170 GSM, Art. Paper, Glossy. One fold mid. - A4 Demmy 95 Leaflet/pamphlet for Client of FP & Newer Conrtaceptives - Pages-4, Both side printing. Printing- Multicolour, Paper-130 GSM, Art. Paper, Glossy. One fold mid. - A4 Demmy 96 Home Delivery of Contraceptive Register - Paper : Maplitho 80 GSM , Inside Pages-250, Cover -4 Pages. Single Colour Printing Back to Back (B/W) Cover : Front & Back Hard Kut with duly bind -250 GSM- 12.5x19.5 inch 97 Pregnacy Test Kit Register - Paper : Maplitho 80 GSM , Inside Pages-250, Cover -4 Pages. Single Colour Printing Back to Back (B/W) Cover : Front & Back Hard Kut with duly bind -250 GSM- 12.5x19.5 inch 98 Ensuring in Birth Regsiter - Paper : Maplitho 80 GSM , Inside Pages-250, Cover -4 Pages. Single Colour Printing Back to Back (B/W) Cover : Front & Back Hard Kut with duly bind -250 GSM- 12.5x19.5 inch 99 File Folder (Cover) - 220 GSM Art Board Colour : Multicolour Both side Printing. - 9.6x12 inc 100 Treatment Continuation and Clinic Condition Record sheet - 90 GSM, Maplitho paper, Front and back side 2 Colour Printing.- 8.5x11 inc 101 Monitoring & Nursing order sheet- 90 GSM, Maplitho paper, Front and back side 2 Colour Printing.- 8.5x11 inc 102 Admission sheet (4 Pages) - 4 Colour, 130 GSM, Maplitho paper, perforated at joint - 8.5x11 inc 103 Discharge card (4 Pages) - 4 Colour, 130 GSM, Maplitho paper, perforated at joint - 8.5x11 inc 104 Investigation Sheet - 90 GSM, Maplitho paper, Single side 4 Colour Printing.- 8.5x11 inc 105 Discharge Note - Multicolour 130 GSM Maplitho paper, perforated Booklet 50 Pages/ book - 8.5x11 inc 106 Referral Note - Multicolour Landscape 130 GSM Maplitho paper, perforated and self Carbon Booklet 50 Pages/ book - 8.5x11 inc 107 Community Follow up card - 220 Art Board Colour :Multicolour Both side Printing. - 8x5.2 inc 108 Admission Register - 90 GSM, Maplitho paper, Both sidesingle colour printing. 100 pages/Register - 22x7 inc 109 Follow Up Register - 90 GSM, Maplitho paper, Both sidesingle colour printing. 100 pages/Register - 14x9 inc 110 OPD Register - 90 GSM, Maplitho paper, Both sidesingle colour printing. 100 pages/Register - 14x9 inc 111 Feclity follow up Record Book - 90 GSM, Maplitho paper, single side 4 colour printing with perforated Carbon, 350 GSM Art Card cover, 100 pages/Register - 9x4.25 112 Antenatal Steroid use record register (Referral Summary sheet) - 90 GSM, Maplitho paper, Both side single colour printing. - 14x9 inc 113 Newborn corner Register including CHC - 90 GSM, Maplitho paper, Both side single colour printing, 100 pages/Register - 14x9 inc 114 Handout - Folder Design, Multicolour, Landscape, 100 GSM, Art Paper, Creasing double perforation - 24.75x11.69 inc 115 Flip Chart - Multicolour, Portrait, Wall Calendar style, 170 GSM, Art paper,Spiral Binding, Card board on back, Metal eye (rivet) for hanging, front&back Mirror - 16.54X23.39 116 Standy - Iron Pipe made with print material with 30 kg. weight - 3x4 ft 117 Invitation Card with envelop - Envelop, Multicolour, 130 GSM, Art paper - 8.25X11.75 inc 118 Prashasti Patra - Multicolour, 130 GSM, Art paper - 8.25X11.75 inc 119 Tally Sheet - Multicolour, Maplitho paper, Single side, Landscape - 8.25X11.75 inc 120 Billboard -- 121 Banner - Multicolour, Single Side Print on Cloth - 4X3 ft 122 Micrplan Format - Maplitho Paper, B&W, Single side- 11x22 inc 123 Lab Register - 200 Pages, Crown 100 GSM, Maplitho paper, both side - 10x15 inc 124 T.B Register - 200 Pages, Crown 100 GSM, Maplitho paper, both side printing with numbering, Binding with hard board - 10x15 inc 125 Drug Stock Register - 200 Pages, Crown 100 GSM, Maplitho paper, both side printing with numbering, Binding with hard board - 10x15 inc 126 Lab Form - 300 GSM, White Board, Both side Printing - 8.25X11.75 inc 127 Laboratory culture & Dist. Register - 200 Pages, Crown 100 GSM, Maplitho paper, both side printing with numbering, Binding with hard board - 10x15 inc 128 Treatment Card - 300 GSM, White Board, Both side Printing - 8.25X11.75 inc 129 Identity Card - 250 GSM, Maplitho paper, White Board, both side Multicolour printing with Cover - A4 Demy 130 EAQ of Sputum microscopy - 300 GSM, White Board, Both side Printing - 8.25X11.75 inc 131 Booklet - Size A4, 170 GSM, Art paper with spiral - 8.25X11.75 inc 132 Register Printing - Paper : Maplitho 80 GSM , Inside Pages-250, 4 Pages cover. B/W Front & Back Hard board with binding 250 GSMwith laminated. Rate : for 10 books - 12.5x19.5 133 Book Printing - 50-70 Pages Book, Both Side Printing B&W, Paper : 60 GSM Printed cover page and gardboard back with bill book binding - 8.25X11.75 inc 134 Yellow Line Painting - Painting with multicolour double coate oil paint - 10x6 135 Citizen Charter at HSC level - Tin Plate with stand-rinstallatiOmVinly pasting/oil paint - size 4x3 ft 136 Hoarding (flex) on ANC, Mamta Vahan, JSSK and JSY - Hoarding flex (13 oz) - size 10 x 10 ft 137 Flex banner with iron Framing 4 ANC - ivtulticolur Flex banner with iron framing - size 6x4 feet 138 Job aid for Sahiyas and ANM on Line listing of severe anemia and MDR - Page-one leave both side printing-one fold (Mid), 170 GSM Art Glossy paper Multicolour printing - size 12 inch x 6 inch. 139 Wall paintings on Mamta Vahan and 4 ANC(including PMSMA) up to village level - oil painting, multicolour - size 5x3 ft 140 Poster focusing on JSSK at district, HSC and village level - Multicolour printing,170 GSM Art paper- Swe-3x2A 141 Flex Banner of ComprehensiveAbortion Care (CAC) services. - Multicolour Flex banner (13 oz) - size 2x3 ft 142 Poster at on availability of CAC services. - 170 GSM art paper, multicolour printing - size 17 inch x22 inch 143 Poster at on PMSMA - 170 GSM an paper, multicolour printing - size 13incb x22 inch 144 Leaflet/pamphlet on Conrtaceptives Abortion care for women to be distributed by Sahiya - Multicolor Printing, print front & back (Set -3 nos.) - Size A5. 145 Mamta Wahan Stickers - Multicolour, with pasting. Paper-90 GSM - Size18 inch x 6 inch 146 Hoarding flex on permanent structure inctuding all charges. - Hoarding flex (13 oz) - size 10 x 10 ft 147 Poster on Routine Immunization - Multicolour Printing, Art mossy 170 GSM, paper single side - size poster 2x5 feet 148 Flip Book on MAA ( Sahiya & ANM) - Pages 38 both side printing, Multicolored printing, paper- 150 GSM, Art gossy, with Binding- leftSide Spiral Binding with pastic thick cover - size 12x8.5 inch 149 Hoarding Flex on the concept of MAA and NDD -Hoarding Flex - 10 x15 feet 150 Posters on IDCF - Multicolored, Art Glossy 170 GSM - size 2x3 ft 151 Maa training module for ANM & Doctor. - Total page-36 (34 inside & 4 cover Page) Paper-190 GSM, Art Glossy inside, 250 GSM cover pages, Art Glossy. Both side mulicolored printing, Binding - Central stitch - size 29.5x 20.5 cm 152 Maa training module for ANM - Total page-80 (76 inside & 4 cover Page) Paper-190 GSM, Art Glossy inside, 250 GSM cover pages, Art Glossy. Both side mulicolored printing, Binding - Central stitch - size 29.5x 20.5 cm 153 MAA info kit booklet for sahiya. (1 nos/per shaiya) - Paper-170 GSM, Artpaper mulicolored printing both side, four fold. - size 23x6 inch 154 Poster - 100 GSM, Artpaper multi colour printing- 17x22 155 Swasthya Karyakarta Guide, Leaflet - 170 GSM, Artpaper, 8 Pages multicolour page- 14x21cm 156 Handbill - 60 GSM, Artpaper, Multicolour page size - 1/8 dimmy 157 RNTCP Request From for examination of biological specimen for TB - 70 GSM, Black & White Printing, Both side, Portait - A4 158 RENTCP Referral Slip - 50 GSM, Black & White, Single, Landscape two perforated Line (Vertical) - A4 159 Tuberculosis Treatment Card- 300 GSM, Black & White, Both Side, Landscape - A4 160 Patients TB Identity Card - 300 GSM, Black & White, Both Side, Portrait - A5 161 RNTCP PMDT Treatment Card - 300 GSM, Black & White, Single Side, Landscape, Centre foloding with binding & Belt - A3 162 RNTCP PMDT Treatment Booklet - 150 GSM, 70 DSM inside page Black & White, Both Side, Stapled, 36 Pages - A5 163 RNTCP PMDT Patient Identity Card - 300 GSM, Black & White, Single Side, Portrait - A5 164 ReperraP Transfer form his treatment- 70 GSM, Black & White, Single both Side, Portrait - A4 165 RNTCP PMDT Referral for Treatment From - 70 GSM, Black & White, SingleSide, Portrait - A4 166 TB Notification Register - 300 GSM Hard binding with red cloth/rexin corners with end leaves, 95 GSM Maphitho inside. Black & White, Both Side, Landscape, Good Quality hard board register binding, binding gutter in left side, perfect sewn, Fabrication- Rows of the table on the left side of the page should be aligned with the rows of the table on the right hand side, 101 Sheets with numbers - A3 167 RNTCP PMDT Treatment Register - Cover 300 GSM Hard binding with red cloth/rexin corners with end leaves, 95 GSM Maphitho. Printing - Black & White, Both Side, Landscape, Binding- Good Quality hard board register binding, binding gutter on left side, perfect sewn, Fabrication- Rows of the table on the left side of the page should be aligned with the rows of the table on the right hand side, No. of pages-101 page sheet - A3 168 Tuberculosis Laboratory Ragister - Cover 300 GSM Hard binding with red cloth/rexin corners with end leaves, 95 GSM Maphitho. Printing - Black & White, Both Side, Landscape, Binding- Good Quality hard board register binding, binding gutter on top, perfect sewn, No. of pages-151 sheet (With No.) - A4 169 Culture and DST Register- Cover 300 GSM Hard binding with red cloth/rexin corners with end leaves, 95 GSM Maphitho. Printing - Black & White, Both Side, Landscape, Binding- Good Quality hard board register binding, binding gutter on left side, perfect sewn, Fabrication- Rows of the table on the left side of the page should be aligned with the rows of the table on the right hand side, No. of pages-101 sheet (With No.) - A3 170 Citizen Charter at HSC level - Type of Paper-70 GSM. Printing- Black& White botd side, Portrai. No. of Pages -3 Page Sheet (with No.) - A4 171 Duelist cum Tally Sheet - Cover 4 Pages, 130 GSM, Art Paper Multicolour Printing inside 1 Sheet both side& 25X3= 75 sheet duly perforated 80 GSM Maplitho paperBounded. - 11x8.5 172 Flex Banner on Immunization schedule at HSC and AWC - Duly Multicolour printed 13 oz Flex (with eyelets on four corners) - 4x3R 173 Job aid for Sahiya - Page-50. Multicolour print both side. 130 GSM art paper glossy/ with kutt stand 250 GSM. Binding- Spiral binding Seen sample - 12x3 174 MTC Register - No. of pages- 104, Paper -80 GSM Maplitho, Colour 1+1, cover-Multi colou, art paper 130 art paper, pasting on Hard Board- 11.75x16.5 175 Monthly HMIS format (HSC) - Pages-6+6 pages(One page B/W, Duplicate yellow colour page)=12 pages in 1set printing -single colour, one side Binding-Gum binding (Pad type) on head side with Brown paper cover. Uniform coding on one format. Paper-Maplitho 80 GSM. Each pad 12set of format. Total 144 pages in a set.(Seen Sample) - A4 176 HMIS format (PHC) - Pages-8+8 pages(One page B/W, Duplicate yellow colour page)=16 pages in 1set printing -single colour, one side Binding-Gum binding (Pad type) on head side with Brown paper cover. Uniform coding on one format. Paper-Maplitho 80 GSM. Each pad 12set of format. Total 192 pages in a set.(Seen Sample) - A4 177 HMIS format (CHC) - Pages-8+8 pages(One page B/W, Duplicate yellow colour page)=16 pages in 1set printing -single colour, one side Binding-Gum binding (Pad type) on head side with Brown paper cover. Uniform coding on one format.- A4 178 Infrastructure formate (CHC) - Pages-9+9 pages(One page B/W, Duplicate yellow colour page)=18 pages in 1set printing -single colour, one side Binding-Gum binding (Pad type) on head side with Brown paper cover. Uniform coding on one format. Paper-Maplitho 80 GSM. Each pad 4 set of format. Total 72 pages in a set.(Seen Sample) - A4 179 Infrastructure formate (PHC) - Pages-6+6 pages(One page B/W, Duplicate yellow colour page)=12 pages in 1set printing -single colour, one side Binding-Gum binding (Pad type) on head side with Brown paper cover. Uniform coding on one format. Paper-Maplitho 80 GSM. Each pad 4 set of format. Total 48 pages in a set.(Seen Sample) - A4 180 Citizen Charter at HSC level - Pages-5+5 pages(One page B/W, Duplicate yellow colour page)=10 pages in 1set printing -single colour, one side Binding-Gum binding (Pad type) on head side with Brown paper cover. Uniform coding on one format. Paper-Maplitho 80 GSM. Each pad 4 set of format. Total 40 pages in a set.(Seen Sample) - A4 181 Flex Poster on WIFS - Multicolour flex - 3x2 ft. 182 AFHC cards (Pad) - Page- one leafs, paper -90 GSM, Maphlitho paper, printing - front side one colour and back side two colour printing. Total pages 200/per pad (seen Sample) - 21 cm X 15.5 cm 183 RMNCH Counselor Register- Paper : Leadger Paper Light Green 75 GSM 250 Pages approx Single colour printing back to back Stitch type perfect binding Cover : Front & Back 250 century Chart Paper with Multicolour print on Cover 1 - 29x41 cm 184 MPA Card - Page -2 both side print, perfofated on portion. Paper - 170 GSM, Art. Paper. Printing - Multicolour. (Seen the Seample) - 25x 35 cms 185 Medical Record cheklist + Consent Form - Page : 80 GSM Maplithoi Back to back print single colour with 2 staple binding pages : 10 - 1/4 demy 186 Leaflet/ Pamphlet for Client on FP & Newer Contraceptives - Page -4 both side printing, Printing - Multicolour. Paper - 130 GSM, Art. Paper Glossy. One fold mid - A4 Demmy 187 Handbill - 100 GSM Paper, An Paper Multicolour Printing both side - A4 188 Handout/Brochure - lob Type-Folder Design, Multicolour, Orientation- Landscape 100 GSM Paper - 16.54X23.39 189 Leaflet / other - 100 GSMArt Paper Multicolour Printing both side - A4 190 Venial Sticker - Multicolour - Per Sp. Ft. 191 Venial Sticker - Multicolour (With Installation) - Per Sp. Ft. 192 Chalan Book- 50 Page Book with 2 Duplicate Page Single Colour With Binding - A4 193 Flip Chart - Moulticolour Printing, Portait Wall Calender Style, Refer to image. Ofrset Printing. 170 GSM-220 GSM, uncoated. Spital Binding, Cardboard or the back Metal eye (rivet) for hanging it from a nail, front & Back mirror - A2 194 Stock Register - 200 Page Both Side, Single Colour with Binding- A4 DMI 195 Issue Register - 200 Page Both Side, Single Colour with hard binding- A4 DMI 196 Billboard - Bill Board - Per Sp. Ft. 197 Glow Sign. Board - Glow Sign. Board with Light - Per Sp. Ft. 198 Form Booket 3 Colored Pages with perforated (Triplicate) binding (with Numbering) - 100-150 Pages (1 Book) 151-200 Pages (1 Book) 201-250 Pages (1 Book) 251-300 Pages (1 Book) - 199 Nukad Natak - 8 Member (4 Male & 4 Female) with own all instrument- Per Show 200 T.V Scroll- 24x7 - Per Day 201 Bus/ Van - Equipped with interactive communication devices (T.V/Projector/ Making set) with Fuel - Per Day
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Jharkhand View Result →
12.
Power #10564520 Price Bid
Development Of Distribution Infrastructure Of Packageprayagraj 1 At Prayagraj District Of Puvvnluttar Pradeshunderrevamped Reforms-Based And Results-Linked, Distribution Sector Scheme- 1 Supply Of Consumer Service Cable 2 Supply Of Armored Service Cable For Consumer Service Connection With Accessories As Per Technical Specifications, Scope Of Works And Approved Drawings 3 Supply Of Single Phase Armored Al Cable Size 2Cx 6 Sq Mm 4 Supply Of Three Phase Armored Al Cable Size 4Cx 16 Sq Mm 5 Supply Of 10 Swg Gi Wire 6 Supply Of 8 Swg Gi Wire 7 Supply Of Gi Pipe / M.S Angle Along With Nails / Clamps / Proper Binding E.T.C. As Per Rec Std. 8 Conversion Of Existing Lt Lines On Bare Conductor To Areal Bunch Xlpe Cable 9 Conversion Of Existing Lt Lines With Bare Conductor To Ab Xlpe Cable Using Additional Supports Matching With Length And Type Of Existing Support Asper Technical Specifications, Scope Of Works And Approved Drawings 10 Supply Of 8.5 M / 180 Kgs Pcc Poles ( Pcc Pole As Per State Practice ) 11 Galvanized Stay Set For Lt Line With Anchor Plate ( 200X200x6mm ) , 50X8mm Stay Clamp, 1 No. Stay Guy Insulator, Nut Bolts, 1 No. Turn Buckles, 1.8 M Long, 16 Mm Diameter Solid Gs Stay Rod & 7 / 3.15 Mm Dia Gi Stranded Wire Etc As Required As Per Technical Specification, Approved Drawings And Scope Of Work. 12 Conversion Of Existing Lt Lines Using New Earthing As Per Approved Drawings, Technical Specifications And Scope Of Work 13 Supply Of Spike Earthing Made Of 20Mm X 2500 Mm Gi Solid Rod 14 Supply Of 8 Swg Gi Wire For Earthing And Guarding 15 Supply Of Following Lt Ab Xlpe Cable For Conversion Of Existing Lt Bare Conductor Line With Ab Xlpe Cable As Required As Per Technical Specification, Approved Drawings And Scope Of Work: 16 Supply Of Aerial Bunchedxlpe Cable 3 X 50 Sqmm+1X35 Sqmm. ( Bare Messenger Wire ) +1X16 Sqmm. 17 Supply Of Aerial Bunchedxlpe Cable 3 X 70 Sqmm.+1X50 Sqmm. ( Bare Messenger Wire ) +1X16 Sqmm. 18 Supply Of Aerial Bunchedxlpe Cable 3 X 95 Sqmm.+1X70 Sqmm. ( Bare Messenger Wire ) + 1X16 Sqmm. 19 Supply Of Aerial Bunchedxlpe Cable 3 X 120 Sqmm. + 1X95 Sqmm. ( Bare Messenger Wire ) +1X16 Sqmm. 20 Supply Of Pole Mounted Lt Distribution Box As Per Approved Drawings, Technical Specifications And Scope Of Work 21 Supply Of Three Phase Smc Distribution Box With Clamps 22 Supply Of Single Phase Smc Distribution Box With Clamps 23 Supply Of Xlpe Insulated Al. Cable For Energisation Of Distribution Box / Kiosk As Per Approved Drawings, Technical Specifications And Scope Of Work 24 Suppply Of 2Cx25 Sqmm Stranded Unarmoured Cable ( Al Conductor ) For Chargingsingle Phase Db 25 Suppply Of 4Cx35sqmm Stranded Unarmoured Cable ( Al Conductor ) For Chargingthreephase Db 26 Supply Of Stone Pad ( 300X300x75 ) 27 Supply Of Accessories For Ab Xlpe Cable As Per Approved Drawings, Technical Specifications And Scope Of Work 28 Stainless Steel Strap 29 Hdg Lt Pole Clamp With Nut & Bolt For Laying Abc 30 Dead End Clamp With I-Hook ( Insulated ) 31 Suspension Clamp With I-Hook ( Insulated ) 32 95 / 35 Sqmm - 70 / 25 Sqmm Pg Clamps ( For Line To Line Jumpering & Energizing Db Neutral ) 33 120 / 50 Sqmm - 95 / 25 Sqmm Pg Clamps ( For Line To Line Jumpering & Energizing Db Neutral ) 34 Lt Insulation Piercing Connector 120-50 Sqmm - 50-25 Sqmm Size ( For Energizing Distribution Box ) 35 Lt Insulation Piercing Connector 120-50 Sqmm - 120-50 Sqmm Size ( For Line To Line Jumpering ) 36 Lt Insulation Piercing Connector 16 - 25Sqmmsize Suitable For Street Light Connection 37 Pre-Insulated Compression Connectors Size 16 Sqmm Suitable For Ab Xlpe Cable 38 Pre-Insulated Compression Connectors Size 50 Sqmm Suitable For Ab Xlpe Cable 39 Pre-Insulated Compression Connectors Size 70 Sqmm Suitable For Ab Xlpe Cable 40 Pre-Insulated Compression Connectors Size 95 Sqmm Suitable For Ab Xlpe Cable 41 Pre-Insulated Compression Connectors Size 120 Sqmm Suitable For Ab Xlpe Cable 42 Heat Shrinkable Type End Cap For Ab Xlpe Cable 43 Supply Of New 11 Kv Lines : Feeder Segregation ( Agriculture Feeder ) 44 Supply Of Support For 11 Kv Overhead Line As Per Technical Specification, Approved Drawings And Scope Of Work 45 Supply Of 8.5M / 180 Kgs Pcc Poles - ( Pcc Pole As Per State Practice ) 46 Supply Of 11 M Long Steel Tubular Poles With Welded Steel Base Plate Of Designation 410 Sp 55 ( Is 2713, Pt I, Ii, Iii 1980 ) 47 Supply For 3 Phase 11 Kv Line Using New Pre-Fabricated Hot Dip Galvanized Steel Items Like V Cross Arm, Top Channel, Top Clamp, Cross Arm, Bracket, Clamps, Cross Bracings, Bracings, Strain Plate, Guarding Channels, Back Clamp, Ms Angle, Ms Transformer Base Channel, Ms Flats Pole Extension Channel With Welded Plate, Anti Climbing Device Clamp Etc Of Given Sizes For Over Head Structures As Per Technical Specification, Approved Drawings And Scope Of Work. 48 Supply Of Hot Dip Galvanized Ms Nuts, Bolts With Washers And Turn Buckle For Guarding As Per Technical Specification, Approved Drawings And Scope Of Work. 49 Supply Of Pole Accessories As Per Technical Specification, Approved Drawing And Scope Of Work 50 Supply Of 11 Kv Danger Board 51 Supply Of Stone Pad 300X300x75 52 Supply Of Barbed Gi Wire 12 Swg 53 Supply Of Stay Set ( Galvanized ) With 50X8 Mm Stay Clamp, Stay Guy Insulator ( 1 Nos. ) , Anchor Plate ( 200X200x6 ) , Nut Bolts, 1 Nos Turn-Buckles, 1.8 M Long, 16 Mm Diameter Solid Gs Stay Rod & 7 / 3.15 Mm Dia Gi Strandedwire Complete As Per Technical Specification, Approved Drawings And Scope Of Work. 54 Supply Of Insulator And Hardware As Per Technical Specification, Approved Drawings And Scope Of Work. 55 Supply Of 11 Kv45 Kn Polymer Disc Insulator Along With Suitable Hardware Fittings 56 Supply Of 11 Kv 5 Kn Polymer With Pin Insulators 57 Supply Of Earthing Arrangement As Per Technical Specifications, Approved Drawings And Scope Of Work. 58 Supply Of Spike Earthing 20Mm X 2500 Mm Gi Solidrod 59 Supply Of 8 Swg Gi Wire For Earthing And Guarding 60 Supply Of 6 Swg Gi Wire For Earthing And Guarding 61 Supply Of Acsr Conductors Of Following Sizes With Jointing Sleeves, Binding Materials, Pg Clamps, Bi-Metallic Clamp, Hardware Etc For Overhead Line And Jumpers As Required As Per Technical Specification, Approved Drawings And Scope Of Work 62 Supply Of 6 / 2.59 + 1 / 2.59 Mm ( 30 Mm² Al. Area ) - Weasel 63 Supply Of 11 Kv, 600A, 3-Ph, 3 Pin Type, Vertical Mounting Type, Gang Operated, Ab Switch Along With Support Insulators, Base Channel Down Pipe, Arcing Horns Etc. Complete Asper Technical Specifications, Scope Of Works And Approved Drawings 64 Supply Of 11 Kv Lineunderground Railway Crossing Ensuring Statutory Clearances As Required As Per Technical Specification, Approved Drawings And Scope Of Work 65 Supply For 11 Kv Lineunder Ground Railway Crossing With 2 Nos ( Including One Spare ) 3Cx185 Sqmm Xlpe Armored Cable ( 0.3 Km Each ) Using 150Mm Dia Gi Pipes ( Grade A For Underground Laying And Grade B For Pole Support ) , Outdoor Heat Shrinkable Cable Jointing Kit, 11 Kv Lightening Arrestor Station Class 10Ka ( 6 Nos. ) , Lugs, 4 Nos Gi 3-Meters Long Pipe Earthing, 6 Swg Gi Wires, Cable Markers, Bi Metallick Clamps And Jumpering Etc As Required As Per Technical Specifications, Drawings And Scope Of The Work. 66 Supply Of 11 Lv Line Underground Highway Crossing Ensuring Statutory Clearancesas Required As Per Technical Specification, Approved Drawings And Scope Of Work 67 Supply Of 11 Kv Lineforunder Ground Highway Crossing By 2 Nos ( Including One Spare ) 3Cx185 Sqmm Xlpe Armored Cable ( 0.3 Km Each ) Using 160 Mm Hdpe Pipe At Road Crossing And 150Mm Dia Gi Pipes ( Gradeb For Pole Support ) , Outdoor Heat Shrinkable Cable Jointing Kits, 11 Kv Lightening Arrestor Station Class 10Ka ( 6 Nos. ) , Lugs, 4 Nos Gi 3-Meters Long Pipe Earthing, 6 Swg Gi Wires, 7 / 20 Gi Wire, Cable Markers, Bi Metallick Clamps And Jumpering Etc As Required As Per Technical Specifications, Drawings And Scope Of The Work. 68 Supply Of 12 Kv 3Ph Indoor Type Switch Gear And 11 Kv Xlpe Cable As Per Technical Specifications, Approved Drawings And Scope Of Works: 69 Supply Of Indoor Type 12 Kv 3 Ph 1250 A Vcb With Control And Protection System For Out Going Feeder Consisting Ofct, A-Meter, Volt-Meter, Relays, Energy Meter ( Tvm ) Dlms Compliant & Accessories Complete As Per Specifications For Feeder Breaker 70 11 Kv 3X 185 Sqmm Xlpe Armored Power Cable, Aluminum Stranded Conductor, Including Their Termination Materials Like Indoor And Outdoor Termination Kit, Glands, Lugs, Tagging, Cable Path Marker Etc As Required As Per Technical Specifications, Approved Drawings And Scope Of The Works. 71 Supply For Augmentation Of Lines 72 Supply For Augmentation Of 33 Kv Line 73 Supply For Augmentation Of 3 Phase 33 Kv Line Using Additional Supports Matching With Length And Type Of Existing Support Asper Technical Specifications, Scope Of Works And Approved Drawings 74 Supply Of 11 M Long Steel Tubular Poles With Welded Steel Base Plate Of Designation 410 Sp 55 ( Is 2713, Pt I, Ii, Iii 1980 ) 75 Supply New Pre-Fabricated Hot Dip Galvanized Steel Item, For Augmentation Of 33 Kv Line, Like V Cross Arm, Top Channel, Top Clamp, Cross Arm, Bracket, Clamps, Cross Bracings, Bracings, Strain Plate, Guarding Channels, Back Clamp, Ms Angle ( 65X65x6mm ) , Ms Flats ( 65X8mm ) Anti Climbing Device Clamp Etc Of Given Sizes For Over Head Structures As Per Technical Specification, Approved Drawings And Scope Of Work. 76 Supply Of Hot Dip Galvanized Ms Nuts, Bolts With Washers And Turn Buckle For Guarding As Per Technical Specification, Approved Drawings And Scope Of Work. 77 Supply Of Pole Accessories As Per Technical Specification, Approved Drawing And Scope Of Work 78 Supply Of 33 Kv Danger Board 79 Supply Of Gi Barbed Wire 12 Swg 80 Supply For Augmentation Of 3 Phase 33 Kv Line Replacing Existing Conductor With Following Type Of New Acsr Conductor Including Jointing Sleeves, Binding Material, Aluminum Tape And Helical Preformed Fittings Etc As Required As Per Technical Specification, Approved Drawings And Scope Of Work. 81 Supply Of 6 / 4.72 Mm+7 / 1.57 Mm ( 100 Mm² Al. Area ) - Dog Replacing Existing Racoon Conductor 82 Supply Of 30 / 3.00 + 7 / 3.00 Mm ( 200 Mm² Al. Area ) - Panther Replacing Existing Dog / Racoon Conductor 83 Supply Of 33 Kv Under Ground Cable As Per Technical Specification, Approved Drawings And Scope Of Work. 84 Supply Of 3Cx300 Sqmm 33 Kv Xlpe Armored Cable 85 Supply Of 33 Kv3cx300 Sqmm Xlpe Armored Cable ( 2 Nos Including One Spare ) Accessories Like 160Mm Dia Hdpe Pipes For Road Crossing And 150 Mm Dia Gi Pipegrade B For Pole Support Outdoor Heat Shrinkable Cable Jointing Kits, Lugs, Cablepath Markers, Bi Metallic Clamps, 7 / 20 Gi Wire As Per Technical Specification, Approved Drawing And Scope Of Work 86 Supplyof New Insulator And Hardware For Augmentation Of33 Kv Line As Per Technical Specification, Approved Drawings And Scope Of Work 87 Supply Of 33 Kv 70 Kn Polymer Disc Insulator Along With Suitable Hardware Fittings 88 Supply Of 33 Kv 10 Kn Polymer Pin Insulators 89 Supply Of New Earthing Arrangement For Augmentation Of33 Kv Line As Per Technical Specifications, Approved Drawings And Scope Of Work. 90 8 Swg Gi Coil 115 Turns ( 1.85 Kg ) 91 Supply Of New Stay Set ( Galvanized ) For 33 Kv Line With 50X8 Mm Stay Clamp, 2 Nos. Guy Insulator, Anchor Plate ( 300X300x8mm ) , Nut Bolts, 1 No. Turn-Buckles, 1.8 M Long, 20 Mm Diameter Solid Gs Stay Rod & 7 / 4.00 Mm Dia Gi Strandedwire Complete As Per Technical Specification, Approved Drawings And Scope Of Work. 92 Supply Of New Gi Wire For Earthing And Guarding For Augmentation Of33 Kv Line As Per Technical Specification, Approved Drawings And Scope Of Work. 93 Supply Of 6 Swg Gi Wire 94 Supply Of 8 Swg Gi Wire 95 Supply Of Conductor Accessories As Per Technical Specification, Approved Drawing And Scope Of Work 96 Supply Of Pg Clamp For Dog To Dog Conductor 97 Supply Of Pg Clamp For Panther To Panther Conductor 98 Supply For Augmentation Of 11 Kv Lines 99 Supply For Augmentation Of 3 Phase 11 Kv Line Using Additional Supports Matching With Length And Type Of Existing Support Asper Technical Specifications, Scope Of Works And Approved Drawings 100 Supply Of 8.5 Meter Long / 180 Kg Pcc Poles ( Pcc Pole As Per State Practice ) 101 Supply For Augmentation Of 3 Phase 11 Kv Line Using New Pre-Fabricated Hot Dip Galvanized Steel Items Like V Cross Arm, Top Channel, Top Clamp, Cross Arm, Bracket, Clamps, Cross Bracings, Bracings, Strain Plate, Guarding Channels, Back Clamp, Ms Angle, Ms Flats Pole Extension Canal With Welded Plate, Anti Climbing Device Clamp Etc Of Given Sizes For Over Head Structures As Per Technical Specification, Approved Drawings And Scope Of Work. 102 Supply Of Hot Dip Galvanized Ms Nuts, Bolts With Washers And Turn Buckle For Guarding As Per Technical Specification, Approved Drawings And Scope Of Work. 103 Supply Of Pole Accessories As Per Technical Specification, Approved Drawing And Scope Of Work 104 Supply Of 11 Kv Danger Board 105 Stone Pad ( 300X300x75mm ) 106 Supply Of Gi Barbed Wire 12 Swg 107 Supply For Augmentation Of 3 Phase 11 Kv Line Replacing Existing Conductor With Following Type Of New Acsr Conductor Including Jointing Sleeves, Binding Material And Helicon Formed Fittings Etc As Required As Per Technical Specification, Approved Drawings And Scope Of Work. 108 Supply Of 6 / 2.59 + 1 / 2.59 Mm ( 30 Mm² Al. Area ) - Weasel By Replacing Existing Weasel / Squirrel Conductor 109 Supply Of 6 / 3.35 + 1 / 3.35 Mm ( 50 Mm² Al. Area ) - Rabbit By Replacing Existing Weasel / Squirrel Conductor 110 Supply Of 6 / 4.72 Mm+7 / 1.57 Mm ( 100 Mm² Al. Area ) - Dog By Replacing Existing Racoon / Rabbit Conductor 111 Supply For Augmentation Of 3 Phase 11 Kv Line Using New Insulator And Hardware As Per Technical Specification, Approved Drawings And Scope Of Work 112 Supply Of 11 Kv 45 Kn Polymer Disc Insulator Along With Suitable Hardware Fittings 113 Supply Of 11 Kv 5 Kn Polymer Pin Insulators 114 Supply For Augmentation Of 3 Phase 11 Kv Line Using New Earthing Arrangement As Per Technical Specifications, Approved Drawings And Scope Of Work. 115 Supply Of Gi Earthing Spike Made Of 20X2500mmsolid Rod 116 Supply For Augmentation Of 3 Phase 11 Kv Line Using New Stay Set ( Galvanized ) With 50X8 Mm Stay Clamp, 1 No. Guy Insulator, Anchor Plate ( 200X200x6mm ) , Nut Bolts, 1No. Turn-Buckles, 1.8 M Long 16 Mm Diameter Solid Gi Stay Rod & 7 / 3.15 Mm Dia Gi Strandedwire Complete As Per Technical Specification, Approved Drawings And Scope Of Work. 117 Supply For Augmentation Of 3 Phase 11 Kv Line Using New Gi Wire For Earthing And Guarding As Per Technical Specification, Approved Drawings And Scope Of Work. 118 Supply Of 6 Swg Gi Wire 119 Supply Of 8 Swg Gi Wire 120 Supply Of Conductor Accessories As Per Technical Specification, Approved Drawing And Scope Of Work 121 Supply Of Pg Clamp For Weasel To Weasel Conductor 122 Supply Of Pg Clamp For Dog To Dog Conductor 123 Supply Of Pg Clamp For Rabbit To Rabbit Conductor 124 Installation Of Dt Capacitor 125 Supply Of Dt Capacitor With Fitting As Per Technical Specification, Approved Drawing And Scope Of Work 126 Supply Of Lt Shunt Capacitor 440 Volt 10 Kvar 3Phase 50Hz Ip65 127 Supply Of Lt Shunt Capacitor 440 Volt 16 Kvar 3Phase 50Hz Ip65 128 Supply Of Lt Shunt Capacitor 440 Volt 25 Kvar 3Phase 50Hz Ip65 129 Supply Of Lt Shunt Capacitor 440 Volt 40 Kvar 3Phase 50Hz Ip65 130 Supply Of Lt Shunt Capacitor 440 Volt 63 Kvar 3Phase 50Hz Ip65 131 Supply Of Lt Shunt Capacitor 440 Volt 100 Kvar 3Phase 50Hz Ip65 132 Erection Part 133 Installation Of Consumer Service Cable 134 Installation Of Armored Consumer Service Cable With Accessories Including Dismantling Of Existing Service Cable As Per Technical Specifications, Scope Of Works And Approved Drawings 135 Installation Of Single Phase Armored Al Cable Size 2Cx 6 Sq Mm 136 Installation Of Three Phase Armored Al Cable Size 4Cx 16 Sq Mm 137 Gi Wire 8 Swg 138 Gi Wire 10 Swg 139 Installation Of Gi Pipe / M.S Angle Along With Nails / Clamps / Proper Binding E.T.C. As Per R.E.C Std. 140 Erection For Conversion Of Existing Lt Lines On Bare Conductor To Aerial Bunch Xlpe Cable 141 Excavation Of Additional Pole Pit ( Of Depth 1 / 6Th Of Pole Length ) In Normal Soil Of Following Pole As Per Scope Of Work, Approved Drawings And Specifications: 142 8.5 M / 180 Kgs Pcc Poles - ( Pcc Pole As Per State Practice ) 143 Erection Of Following Types Of Poles For Lt Overhead Line With Stone Pad, Pole Numbering By Paint With Cement Concrete Foundation Using 1 Part Cement, 2 Part Sand, 4 Part 40 Mm Size Stone Aggregate Chips ( 1:2:4 ) Etc As Per Scope Of Work, Approved Drawings And Specifications: 144 Erection Of 8.5 M / 180 Kgs Pcc Poles With Base Stone Pad As Required - ( State Practices Of Pcc Pole And Stone Pad To Be Used ) 145 Excavation Of Lt Stay Pit In Following Type Of Soils, As Per Scope Of Work, Approved Drawings And Specifications: 146 Normal Soil 147 Erection Of Complete Stay Set With Gi Stay Wire ( 7X3.15 Mm Dia ) , Binding Of Stay Wire, By Providing Guy Stay Insulator ( 1 No. ) And 0.2 Cmt Concreting 1 Part Cement, 2 Part Sand, 4 Part 40 Mm Size Stone Aggregate Chips ( 1:2:4 ) As Per Technical Specifications, Approved Drawings And Scope Of Works. 148 Removal Of Existing Lt Bare Line Conductor & Fixtures, Depositing To Stores Of Employer And Erection, Testing & Commissioning Of New Areal Bunched Xlpe Cable, Fixing Tension Clamps For Dead End, Suspension Clamps, Clamps For Neutral, Piercing Connectors Type-I & Type-Ii, Pre- Insulated Compression Connectors, 16 Mm Dia Ms Nuts & Bolts, Pole Clamps, Stainless Steel Strap, Single And Three Phase Pole Mounted Distribution Board, Energisation Of Distribution Box Through 2Cx25 Sqmm And 4Cx35 Sq.Mm Xlpe Cable Fixing End Cap Etc. As Required As Per Technical Specification, Approved Drawings And Scope Of Work: 149 Erection Of Aerial Bunched Xlpe Cable3 X 50 Sqmm +1X35 Sqmm ( Bare Messenger Cum Neutral ) +1X16 Sqmm 150 Erection Of Aerial Bunched Xlpe Cable 3 X 70 Sqmm +1X50 Sqmm ( Bare Messenger Cum Neutral ) +1X16 Sqmm 151 Erection Of Aerial Bunched Xlpe Cable 3 X 95 Sqmm +1X70 Sqmm ( Bare Messenger Cum Neutral ) + 1X16 Sqmm 152 Erection Of Aerial Bunched Xlpe Cable 3 X 120 Sqmm+ 1X95 Sqmm ( Bare Messenger Cum Neutral ) +1X16 Sqmm 153 Erection, Testing & Commissioning Of Earthing By Inserting Gi Earthing Spike Made Of 20Mm Solid Rod As Per Approved Drawings, Scope Of Work And Technical Specifications 154 Erection Of 8 Swg Gi Wire For Earthing By Providing Gi Nut, Bolts & Washers, Turn Buckle Etc As Per Approved Drawings, Scope Of Work And Technical Specifications 155 Erection, Testing And Commissioning Of New 11 Kv Lines: Feeder Segregation ( Agriculture Feeder ) 156 Survey, Route Alignment & Pole Spotting, Preparation Of Survey Report And Uploading In The Web Portal After Approval Of Project Manager 157 Excavation Of Pole Pit ( Of Depth 1 / 6Th Of Pole Length ) In Normal Soil For Following Type Pole As Per Scope Of Work, Approved Drawings And Specifications: 158 8.5 M / 180 Kgs Pcc Poles - ( Pcc Pole As Per State Practice ) 159 11 M Long Steel Tubular Poles With Welded Steel Base Plate Of Designation 410 Sp 55 ( Is 2713, Pt I, Ii, Iii 1980 ) 160 Erection Of Following Types Of Poles For 11 Kv Overhead Line By Installing Danger Plate, Anti-Climbing Devices ( Barbed Wire ) , Painting With Red Oxide & Aluminum Paint To Stp Poles Including Paint, Numberingof Poleby Paint Including Cement Concrete Foundation Using Cement Concreting Foundation 1 Part Cement, 2 Part Sand, 4 Part 40 Mm Size Stone Aggregate Chips ( 1:2:4 ) Etc As Per Scope Of Work, Approved Drawings And Specifications: 161 Erection Of 8.5 M / 180 Kgs Pcc Poles With Base Pad Including Cement Concreting, ( State Practices Of Pcc Pole, Stone To Be Used ) 162 11 M Long Steel Tubular Poles With Welded Steel Base Plate Of Designation 410 Sp 55 ( Is 2713, Pt I, Ii, Iii 1980 ) - Cement Concreting 0.5 Cmt + 0.014 Cmt ( Muffing ) 163 Erection, Testing & Commissioning Of Pre-Fabricated Hdg Steel Items Like V Cross Arm, Top Channel, Top Clamp, Cross Arm, Bracket, Clamps, Cross Bracings, Bracings, Strain Plate, Guarding Channels, Back Clamp, Etc Made Of Ms Channels, Ms Angle, Ms Flats Of Given Sizes For Over Head Structures And Ms Nuts, Bolts & Washersas Per Technical Specification, Approved Drawings And Scope Of Work. 164 Earthing Arrangement As Per Technical Specifications, Approved Drawings And Scope Of Work. 165 Erection, Testing & Commissioning Of Spike Earthing 20Mm X 2500Mm Gi Solid Rod 166 Excavation Of Stay Pit In Following Type Of Soils, As Per Scope Of Work, Approved Drawings And Specifications: 167 Normal Soil 168 Erection Of Complete Stay Set With Gi Stay Wire ( 7X3.15 Mm Dia ) , Binding Of Stay Wire, By Providing Guy Stay Insulator And 0.2 Cmt Concreting 1 Part Cement, 2 Part Sand, 4 Part 40 Mm Size Stone Aggregate Chips ( 1:2:4 ) As Per Technical Specifications, Approved Drawings And Scope Of Works. 169 Erection, Testing And Commissioning Of 11 Kv Insulator Including Their Hardware Fittings As Per Technical Specification, Approved Drawings And Scope Of Work. 170 Erection Of 5 Kn 11 Kv Polymer With Pin Insulator 171 Erection Of 45 Kn 11 Kv Polymer Disc Insulator With Strain Hardware 172 Laying Out, Tensioning, Binding Of Conductor And Tightening Of Stays And Stringing, Testing And Commissioning Of Acsrconductor Of Following Sizes Including Jointing Sleeves, Helical Formed Fittings, Jumpering And By Providing & Erecting Pg Clamps Etc As Required As Per Approved Drawings, Scope Of Work And Technical Specifications 173 Stringing Of 6 / 2.59 + 1 / 2.59 Mm ( 30 Mm² Al. Area ) - Weasel 174 Erection, Testing And Commissioning Of Vertical Type 11 Kvab Switch Along With Support Insulators, Base Channel, Down Pipe, Arcing Horns Etc. Complete Asper Technical Specifications, Scope Of Works And Approved Drawings 175 Erection, Testing & Commissioning Of 11 Kv Line For Under Ground Railway Crossing By2 Nos ( Including One Spare ) 3Cx185 Sqmm Xlpe Armored Cable ( 0.3 Km Each ) , Using 150Mm Dia Gi Pipes, Outdoor Heat Shrinkable Cable Jointing Kits, Lugs, 4 Nosgi 3-Meters Long Earthing Pipe, 6 Swg Gi Wires, Cable Markers, Clamps, Jumpering And 11 Kv Station Type Lightening Arrestors ( 6 Nos. ) , Etc As Required As Per Technical Specifications, Approved Drawings And Scope Of He Work. 176 Erection, Testing & Commissioning Of 11 Kv Line For Under Ground Highway Crossing By2 Nos ( Including One Spare ) 3Cx185 Sqmm Xlpe Armored Cable ( 0.3 Km Each ) , Using 160 Mm Hdpe Pipe At Road Crossing, 150Mm Dia Gi Pipes For Cable Support, Outdoor Heat Shrinkable Cable Jointing Kits, Lugs, 4 Nosgi 3-Meters Long Earthing Pipe, 6 Swg Gi Wires, 7 / 20 Gi Wire, Cable Markers, Clamps, Jumpering, 11 Kv Station Type Lightening Arrestors ( 6 Nos. ) , Etc As Required As Per Technical Specifications, Approved Drawings And Scope Of He Work. 177 Erection Of 12 Kv, 1250 A, 25Ka For 3 Seconds, 3-Ph, Indoor Typevacuum Circuit Breaker With Adopter Panel For Out Going Feeder By Leveling, Alignment And Welding On Existing Cable Trench In Control Room. Testing & Commissioning Of Indoor Vcb Panel Including 3 Nos Indoor Type Current Transformer, A-Meter, Volt-Meter, Relay & Accessories Protection As Per Approved Drawings, Technical Specifications And Scope Of The Work.: 178 Providing And Fixing Of Sign Board Includingmaterial And Its Fabrication , Painting , Writing , Logo And Scheme Etc As Per Rdss Guidelines And T.S 179 Laying, Erection, Termination Using Indoor & Outdoor Termination Kit, 11Kv 3X 185 Sqmm Xlpearmored Power Cablesas Per Technical Specifications, Approved Drawings And Scope Of Works. : 180 Erection, Testing & Commissioning Of New Gi Wire For Earthing And Guarding As Per Technical Specification, Approved Drawings And Scope Of Work. 181 Erection Of 6 Swg Gi Wire 182 Erection Of 8 Swg Gi Wire 183 Extension Of Control Room Of 33 / 11 Kv Substation To Accommodate Vcb For New 11 Kv Feeders As Per Technical Specification, Approved Drawing And Scope Of Work. 184 Design, Engineering Construction Of Control Room Building Extension 300 Sq Feet Including Cost Ofall Materials, T&P And Labour, Etc. As Per Technical Specification And Approved Drawing As Per Direction Of Employer 185 Shifting Of Following Distribution Transformer Along With Fixture Including Dismantling , Shifting And Erection From One Location To Another Location As Per Approved Survey. 186 Single Phase Transformer 187 Three Phase Transformer 188 Erection For Augmentation Of Lines 189 Erection For Augmentation Of 33 Kv Line 190 Excavation Of Additional Pole Pit ( Of Depth 1 / 6Th Of Pole Length ) In Normal Soil As Per Scope Of Work, Approved Drawings And Specifications: 191 11 M Long Steel Tubular Poles With Welded Steel Base Plate Of Designation 410 Sp 55 ( Is 2713, Pt I, Ii, Iii 1980 ) 192 Erection Of Following Types Of Additional Poles Matching With Existing Line Supports By Installing Danger Plate, Anti-Climbing Devices ( Barbed Wire ) , Painting With Red Oxide & Aluminum Paint Including Paint, Pole Numbering Including Cement Concrete Foundation Using 1 Part Cement, 2 Part Sand, 4 Part 40 Mm Size Stone Aggregate Chips ( 1:2:4 ) Etc As Per Scope Of Work, Approved Drawings And Specifications: 193 11 M Long Steel Tubular Poles With Welded Steel Base Plate Of Designation 410 Sp 55 ( Is 2713, Pt I, Ii, Iii 1980 ) - Cement Concreting 0.5 Cmt + 0.014 Cmt ( Muffing ) 194 Excavation Of Stay Pit For 33 Kv Stay In Following Type Of Soils, As Per Scope Of Work, Approved Drawings And Specifications: 195 Normal Soil 196 Erection Of Complete Stay Set With Gi Stay Wire ( 7X4.00 Mm Dia ) , Binding Of Stay Wire, By Providing Guy Stay Insulator And 0.3 Cmt Concreting 1 Part Cement, 2 Part Sand, 4 Part 40 Mm Size Stone Aggregate Chips ( 1:2:4 ) As Per Technical Specifications, Approved Drawings And Scope Of Works. 197 Erection, Testing And Commissioning Of 33 Kv Insulator Including Their Hardware Fittings As Per Technical Specification, Approved Drawings And Scope Of Work. 198 Erection Of 33 Kv 10 Kn Pin Insulator With Gi Pin 199 Erection Of 33 Kv 70 Kn Disc Insulator With Strain Hardware ( Set Of 3, 11 Kv Disc Insulators ) 200 Erection, Testing & Commissioning Of New Pre-Fabricated Hdg Steel Items Like V Cross Arm, Top Clamp, Cross Arm, Bracket, Clamps, Cross Bracings, Bracings, Strain Plate, Guarding Channels, Back Clamp, Etc Made Of Ms Channels, Ms Angle, Ms Flats Of Given Sizes For Over Head Structures As Per Technical Specification, Approved Drawings And Scope Of Work. 201 Dismantling Of Existing Overhead Line Conductor And Fittings, Depositing The Dismantled Material To EmployerS Store And Laying Out & Stringing Of New Acsr Conductor Of Following Sizes By Providing Jointing Sleeves, Binding Wire & Tape & Helical Formed Fittings Etc As Required As Per Technical Specification, Approved Drawings And Scope Of Work. 202 Stringing Of 6 / 4.72 Mm+7 / 1.57 Mm ( 100 Mm² Al. Area ) - Dog Replacing Existing Racoon Conductor 203 Stringing Of 30 / 3.00 + 7 / 3.00 Mm ( 200 Mm² Al. Area ) - Panther Replacing Existing Dog / Racoon Conductor 204 Erection, Testing & Commissioning Of 33 Kvunder Ground Cable By2 Nos ( Including One Spare ) 3Cx300 Sqmm Xlpe Armored Cable, Using 160 Mm Hdpe Pipe At Road Crossing, 150Mm Dia Gi Pipes For Cable Support, Outdoor Heat Shrinkable Cable Jointing Kits, Lugs, Cable Markers, Clamps, Jumpering, 7 / 20 Gi Wire Etc As Required As Per Technical Specifications, Approved Drawings And Scope Of He Work. 205 Erection For Augmentation Of 3 Phase 33 Kv Line Using New Insulator And Hardware As Per Technical Specification, Approved Drawings And Scope Of Work 206 Erection Of 33 Kv 70 Kn Polymer Disc Insulator Along With Suitable Hardware Fittings 207 Erection Of 33 Kv 10 Kn Polymer Pin Insulators 208 Erection, Testing & Commissioning Of Earthing As Per Technical Specifications, Approved Drawings And Scope Of Work. 209 8 Swg Gi Coil 115 Turns ( 1.85 Kg ) 210 Erection, Testing & Commissioning Of New Gi Wire For Earthing And Guarding As Per Technical Specification, Approved Drawings And Scope Of Work. 211 Erection Of 6 Swg Gi Wire 212 Erection Of 8 Swg Gi Wire 213 Erection For Augmentation Of 11 Kv Lines 214 Excavation Of Additional Pole Pit ( Of Depth 1 / 6Th Of Pole Length ) In Normal Soil As Per Scope Of Work, Approved Drawings And Specifications: 215 8.5 M / 180 Kgs Pcc Poles - ( Pcc Pole As Per State Practice ) 216 Erection Of Following Types Of Poles For 11 Kv Overhead Line By Installing Danger Plate, Anti-Climbing Devices ( Barbed Wire ) , Pole Numbering Including Cement Concrete Foundation Using 1 Part Cement, 2 Part Sand, 4 Part 40 Mm Size Stone Aggregate Chips ( 1:2:4 ) Etc As Per Scope Of Work, Approved Drawings And Specifications: 217 Erection Of 8.5 M / 180 Kgs Pcc Poles Withbase Stone Pad ( State Practices Of Pcc Pole And Base Plate / Stone To Be Used ) 218 Excavation Of Stay Pit In Following Type Of Soils, As Per Scope Of Work, Approved Drawings And Specifications: 219 Normal Soil 220 Erection Of Complete Stay Set With Gi Stay Wire ( 7X3.15 Mm Dia ) , Binding Of Stay Wire, By Providing Guy Stay Insulator And 0.2 Cmt Concreting 1 Part Cement, 2 Part Sand, 4 Part 40 Mm Size Stone Aggregate Chips ( 1:2:4 ) As Per Technical Specifications, Approved Drawings And Scope Of Works. 221 Erection, Testing And Commissioning Of 11 Kv Insulator Including Their Hardware Fittings As Per Technical Specification, Approved Drawings And Scope Of Work. 222 Erection Of 11 Kv Pin Insulator With Gi Pin 223 Erection Of 11 Kv Disc Insulator With Strain Hardware 224 Dismantling Of Existing Overhead Line Conductor & Fittings And Depositing To EmployerS Store, Laying Out, Tensioning, Binding Of New Conductor And Tightening Of Stays And Stringing, Testing And Commissioning Of Acsrconductor Of Following Sizes Including Jointing Sleeves, Helical Formed Fittings, Jumpering And By Providing & Erecting Pg Clamps Etc As Required As Per Approved Drawings, Scope Of Work And Technical Specifications 225 Stringing Of 6 / 2.59 + 1 / 2.59 Mm ( 30 Mm² Al. Area ) - Weasel By Replacing Existing Weasel / Squirrel Conductor 226 Stringing Of 6 / 3.35 + 1 / 3.35 Mm ( 50 Mm² Al. Area ) - Rabbit By Replacing Existing Weasel / Squirrel Conductor 227 Stringing Of 6 / 4.72 Mm+7 / 1.57 Mm ( 100 Mm² Al. Area ) - Dog By Replacing Existing Racoon / Rabbit Conductor 228 Erection, Testing & Commissioning Of Pre-Fabricated Hdg Steel Items Like V Cross Arm, Top Channel, Top Clamp, Cross Arm, Bracket, Clamps, Cross Bracings, Bracings, Strain Plate, Guarding Channels, Back Clamp, Etc Made Of Ms Channels, Ms Angle, Ms Flats Of Given Sizes For Over Head Structures And Hdg Ms Nuts, Bolts & Washers As Per Technical Specification, Approved Drawings And Scope Of Work. 229 Erection, Testing And Commissioning Of 11 Kv Insulator Including Their Hardware Fittings As Per Technical Specification, Approved Drawings And Scope Of Work. 230 Erection Of 5 Kn 11 Kv Polymer Pin Insulator 231 Erection Of 45 Kn 11 Kv Polymer Disc Insulator With Strain Hardware 232 Earthingand Guarding Arrangement As Per Technical Specifications, Approved Drawings And Scope Of Work. 233 Erection, Testing & Commissioning Of Spike Earthing 20Mm Solid Rod 234 Erection Of 8 Swg Gi Wire For Earthing And Guarding 235 Erection Of 6 Swg Gi Wire For Earthing And Guarding 236 Erection Of Dt Capacitor 237 Erection, Testing & Commissioning Offollowing 440 Volt Lt Shunt Capacitor Including Mounting Structure And Accessories As Required As Per Technical Specifications, Approved Drawings And Scope Of Work. 238 Erection Of Lt Shunt Capacitor 440 Volt 10 Kvar 3Phase 50Hz Ip65 239 Erection Of Lt Shunt Capacitor 440 Volt 16 Kvar 3Phase 50Hz Ip65 240 Erection Of Lt Shunt Capacitor 440 Volt 25 Kvar 3Phase 50Hz Ip65 241 Erection Of Lt Shunt Capacitor 440 Volt 40 Kvar 3Phase 50Hz Ip65 242 Erection Of Lt Shunt Capacitor 440 Volt 63 Kvar 3Phase 50Hz Ip65 243 Erection Of Lt Shunt Capacitor 440 Volt 100 Kvar 3Phase 50Hz Ip65 244 Discount Offered In % 245 Words Final Quoted Price After Discount
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 6
Uttar Pradesh View Result →
13.
Health and Family Welfare #10433257 Price Bid
Supply Of Machine, Equipment And Others , List Of Machine And Equipments , Laproscopic Hd Camera Brand - Karl Storz/Conmed/Olympus Technical Specification Resolution: 1920X1200 Pixes / 1900X1000 Pixes Cable Length: 300 Cm , Ultrasonic Harmonic Scalpel Brand - Johnson Technical Specification Dimensions: (Hxwxd) 5.3 14.5X15.2 Voltage: 100-240 Vac Frequency: 50/60 Hz Rated Current: 3 Amp , Ultrasonic Harmonic Scalpel Brand - Valley Lab Technical Specification Macrobipolar/Bipolar: 473 Khz Sinusoid, 100% Duty Cycle. Seal: 473 Khz Sinusoid Pulsed , Hand Instruments For Laproscopy Brand- Karl Storz/ Olympus Technical Specification I) Veress Needle: It Should Be With Spring Action Blunt Style -12 Cm: 1 No 10 Cm: 1 No 8 Cm: 1 No Ii) Trocar And Cannula:10 Mm: 2 Nos 7 Mm: 1 No. 5 Mm 6 Nos It Should Consists Of Trocar, Cannula With Insufflation And Multifunctional Valve And Must Have Pyramidal Tip. Iii) Reducer/Reduction Sleeve 5 Mm. 1 No Iv) Telescopes: 10 Mm- 0°- 1 Nos -30? - 1 Nos5 Mm-30? 1 Nos Rigid Rod Lens System Provides Good Resolution And The Better Dept Perception. It Should Have Uniform Image Brightness And Autoclavable. The 300 Forward Oblique Angle And Permits For Greater Latitude For Viewing Underlying Areas Under Difficult Anatomical Conditions. V) Suction Cannula: 10 Mm - 1 No 5 Mm -1 Nos Vi) Laparoscopic Scissors: Curved (Monopolar Metzenbaum Dissector 5Mm Diameter): 1 Nos Straight (Bipolar):1 Nosperitoneal Scissor: 1 Nosvii) Unipolar Forceps (Hook & Spatula): 2 Nos Viii) Bipolar Forceps : 2 Nos Ix) Atraumatic Forceps: Maryland Dissector Forceps: : 2 Nos. Fenestrated Forceps: : 2 Nos. X) Needle Holder (Flat Jaw) With Handle : 2Nos Xi) Monopolar Cable (Reusable):1 Nos. Xii) Bipolar Cable (Reusable): 1 Nos Xiii) Allis (Double Row Of Teeth) Grasper: 1 Nosxiv) Aspiration Needle: 1 Nos. Xv) Reducer/ Reduction Sleeve (5Mm): 1 Nos Xvi) Grasping Forceps (Toothed & Rachet 5Mm): 2 Nos Xvii) Laparoscopic Knot Pusher: 1 Nos Xviii) Clip Applicator (Reusable): 5Mm -: 1 Nos : 10 Mm: Ino Xix) Uterine Manipulator: 1 Nos Xx) Clips( Medium & Large) Xxi) Drilling Needle:1 Nos Xxii) Infiltration Needle: 1 Nos Xxiii) Biopsy Forceps (Toothed Punch Biopsy): 1 Nos Xxiv) Myoma Fixation Screw: 2 Nos Xxv) Tissue Morcellator With Base Unit & Accessories: 1 Nos , Dual Wavelenght Laser Brand- Zeiss Technical Specification Laser Type: Diode, Semiconductor Wavelength : 1470Nm+635Nm Max Power: 15 Watts/1470Nm+5Mv/635 Aiming Beam : 635Nm/1, 4Mw Max Or 515Nm/2, 5Mw Max Operation Mode : Continuous Or Modulated Pulsed Time : 0.05Ms-1000Ms Beam Delivery : Sma905 Connector Optic Fiber Compatible : Optic Fibers Having A Core From 200Um To 1000Um, Na=0.22~0.48 Beam Emission Initiation : Footswitch Controller :Microprocessor Display : 10.1 Ips With Touch Panel Medical Approved Cooling :Internal, Air And Thermoelectric Cooling Power Supply Of The Laser: Dc 24V/8.33A From The Separate Ac Power Supply Of Ac Adapter : Single Phase 100-240Va; 50-60Hz, Max 90W Ac Adapterdc 24V/8.33A Medical Approved Laser Dimensions: 27Cm*24,5Cm X 9Cm Laser Weight: 2.75Kg Laser Case Dimensions : 53Cm X 38Cm X 23Cm Weight Of Laser With Cases : 9Kg Environmental Conditions During Work : From +10 To 24°C Degree, Relative Humidity From 30% Up To 60% Cass Of Medical Deviceiib Laser Safety Class 4 Electric Safety Class I Type B Housing Protection Degree Ip20b , Hd Camera Set Brand- Karl Storz/ Olympus Technical Specification (I) Hopkinsa® Forward-Oblique Telescope 30A, Diameter 4 Mm, Length 30 Cm, A Utoclavable, Fiber Optic Light Transmission Incorporated, Color Code Ed :1 Nos (Ii) Telecam C3 : 1 Nos (Iii) Image1 St™ Hx One-Chip Full Hd Camera Head, 50/60 Hz, Fixed Focus, Prog Ressive Scan, Soakable, Gas-And Plasmasterilizable, Focal Length F = 16 Mm, 2 Freely Programmable Camera Head Buttons, For Use With Image1 X-Link Tc301, Tele Pack + And Tp101 : 1 Nos (Iv) Medical Grade Surgical Monitor - Fhd : 1Nos (V) Cold Light Fountain Power Led 175 Scb, With Integrated Karl Storz-Scb, High-Performance Led And One Karl Storz Light Outlet, Power Supply 11-240 Vac, 50/60 Hz Including: 400 A Mains Cord 20090170 Scb Connecti G Cable : 1Nos (Vi) Fiber Optic Light Cable, With Straight Connector, Extremely Heat-Resi Stant, With Safety Lock, Diameter 4. 8 Mm, Length 250 Cm :1 Nos , T U R P Set Brand-Olympus Technical Specification (1) Cystoscope-Urethroscope Sheath, 22 Fr :1 Nos (2) Telescope Bridge, With 1 Lockable Channel, For Use With Cystoscope Sheaths : 1Nos (3) Working Element, E 1 Working Element (Also For Use With Optical Urethrotome) 2 Cutting Loops2 Coagulat Ng Electrodes 2 High Frequency Cords 1 Protection Tube . The Thumb Support Is Movable. In Rest Position Th Electrode Is Inside The Sheath.:1 Nos (4) Resectoscope Sheath, 26 Fr, 1 Nos (5) Schmiedt Visual Obturator, : 1 Nos (6) Cutting Loop Angled, 24/26 Fr., Units Of 6 : 1Nos Ellik Evacuator:1 Nos (7)Urethrotome Sheath, 21 Fr. Urethrotome Sheath And 2 Luer-Lock Cones.:1 Nos (8) Obturator, For Urethrotome Sheath, 21 Fr.1 Nos Sachse Cold Knife, Straight, Not To Be Used With Hf Current This Artic Le Is Only Available In Units Of 6 :1 Nos , Flexible Cystoscope Brand-Olympus Technical Specification Cysto-Urethro-Fiberscope, With Contrapositive Deflection Mechanism, De Flection Of Distal Tip 210°/140, Direction Of View 0°, Angle Of View 10, Working Channel Inner Diameter 7 Fr., Sheath Size 15.5 Fr., Worki G Length 37 ??, Consisting Of: 11272 Cu1 Cystourethro-Fiberscope 2767 A Case 27023 Fe Grasping Forceps 27023 Ze Biopsy Forceps 13242 Xl Lea Age Tester 11025 E Pressure Compensation Cap 27651 B Cleaning Brush 27 14 Y Lueradaptor , Echocardiography Brand-Ge Healthcare/ Philips / Siemens Healthcare/Bpl Technical Specification A) 2D, M-Mode, Colour M-Mode B) Colour Flow Doppler Imaging C) Fully Steerable Pulsed Doppler D) Fully Steerabie Continuous Wave Recall E) Digital Cine Replay Of All Imaging And Doppler Modalities. F) On Screen Cine Storage & Image Recall G) Digital Image Storage And Patient Archive With True Scanner Frame Rates. H) Full Measurement And Analysis Capabilities. Both On Line And Offline Preferable. I) Imaging Frequencies From 1 Mhz To 15 Mhz J) Review Of Stored Ultrasound Images. K) User Adjustable B Colorization Maps, Gain Settings, Colour Doppler Baseline, Angle Correction And Other Important Parameters With Live/Frozen/Archived Images/Loops. , 12 Lead Ecg Machine (Brand - Bpl/Maestros) Technical Specification Electrocardiograph Should Have Capability Of Recording 12-Lead Ecg And Should Have The Following Features: 1. Should Have Simultaneous Acquisition Of 12 Leads 2. Should Have A Display To Preview The Ecg Waveform Before Printing 3. Should Have 7 Inch Or More Display With High Resolution Screen 4. Should Be Compact, Portable And Easy To Operate 5. Should Have Keyboard For Manual Entry Of Patient Data 6. Should Have Provision For Providing Hospital Name On The Printed Record7. Should Work On Li-Ion Battery8. Should Have A Frequency Response Of 0.01-300 Hz 9. Should Have Sampling Frequency Of 15,000 Hz Or More10. The Device Should Weigh Less Than 5.5 Kgs With Battery11. Should Have A Special Arrhythmia Triggered Mode Of Printing12. Should Have Pacemaker Detection Facility 13. Should Be Able To Record On Different Modes Of Sensitivity: 2.5,5,10,20 Mm/Mv & Agc14. Should Have Different Recording Speeds: 5, 10, 12.5, 25 And 50 Mm/Sec15. Should Have Different Filters Available For Smoothing Of Waveform16. Should Have Ac Filter, Emg Filter: 25 Or 35 Or 45 Hz Or Off17. Should Have Anti-Drift Filter18. Should Have Different Print Formats: 3/6/12, 3X4 With Rhythm Leads, 6X2, 12X119. Should Have A Large Storage Of 700 Ecgs Or More20. In Case Of Error In Lead Connections, The Machine Should Display The Change In Color Of Particular Lead.21. Should Be Able Transfer Data Directly In Pdf Format To Usb22. Should Be Able To Printout Records On Thermal Paper As Well Z-Fold23. Should Have Facility Of Printing In Automatic/ Manual/ Rhythm/ R-R Mode Of Printing24. Should Have Facility For Interpretations And Measurements25. Should Provide Detailed Printout Of Patient Data26. Should Have Paper Of Minimum Width Of 210Mm27. Should Have The Capability To Generate Any Number Of Ecg Copies For Distribution28. Should Be Able To Connect To Pc 29. Should Be Able To Operate To A Maximum Of 4 Hours On A Newly Charged Battery30. Should Have Direct External Printer Connectivity31. The Unit Should Be Portable And Should Be Able To Carry With Help Of A Handle.32. The Product Should Be Ce Certified33. The Manufacturer Should Be Iso Certified34. The Device Should Be Provided With Standard Accessories:A) Ecg Cable (Adult)-1 Nob) Gel Bottle- 1 Noc) Chest Electrodes (Set Of 6)- 1 Nod) Limb Electrodes (Set Of 4)- 1 Noe) Z-Fold Paper - 1 Packf) User Manual-1 No , Multipara Patient Monitor(Brand - Drager/Penlon/ Bpl) Technical Specifications For Multipara Monitor 1. Multiparameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,(Massimo),Nibp (Suntech) Temperature.3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have12-Inchcolor Lcd Display.5. Should Have Dual Modes Of Operation: Rotary Knob.6. Should Display 7 Waveforms Or More7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen.8. Ecg: Should Be Able To Monitor Ecg Through 5-Lead Patient Cab Should Have Manual St Analysis Window ,Should Detect 20 Arrhythmias And Generate Alarms. , The Priority Of Arrhythmia Alarms Can Be Configurable, Should Measure Pvc &Pac Should Be Able To Monitor Heart Rate From 10-300 Bpm Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etcshould Have Pacemaker Detection Facility Respiration: Measurement Range Of 0 To 150 Breaths Per Minshould Have Gain Selection: ×0.25, ×1, ×2, ×4 Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S Should Have Apnea Detection Facility Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10 Spo2: Should Have Massimo Technologyshould Have Measurement Range Of 0~100 % Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: Must Be Of Suntech Medicaltechnology For Clinical-Grade Blood Pressure Measurement Have Auto, Manual, And Stat Modes Of Operation For Nibp. Should Have A Measuring Range Of 0-280 Mmhg Should Have 2 Channels For Temperature Monitoring Should Have Data Storage Capabilities:72 Hours Of Trend Data Storage. , Bp Machine Brand - Pagoda/ Omron/ Platinium/ Dr Trust/Bpl Technical Specification Should Be Able To Measure Blood Pressure And Pulse Rate In Adult As Well As Pediatric Patients. Should Be Based On Oscillometric Measurement Technology, Using Dynamic Linear Deflation Method. Should Have Backlight Lcd Display With Easy To View Readings In Dim Light. Pressuremeasurement Range Should Be 60 To 250Mm Hg Systolic, And 40 To 200Mm Hg Diastolic. Pressure Display Accuracy Of +/- 3 To 5 Mm Hg Pulse Rate Measurement Range Of 40 To 200 Per Minute Pulse Measurement Accuracy Of Within 5% Should Include Ac Adapter (Input Range 100-240V And Output Voltage Dc 6V), Preferably With Rechargeable Battery (3.6V To 4.8V, 1900 To 2400Mah) Cuff (22 To 32 Cm Size) Should Be Supplied With Standard Adult Size Single Button Operation For Start And Stop Functions With Auto-Inflation Of Blood Pressure Cuff. , Ventilator Brand - Drager/Bpl/Medisys Technical Specification 1. The Ventilator Should Be High-Endventilator Suitable For Ventilating To Adult And Pediatric Application. Should Have Advanced Microprocessor Control System With Individual Selection Of Various Ventilation Parameters. 2. The Unit Should Be With Altitude Compensation For Volume And Btps Correction For Monitoring3. The Unit Should Be Of Wall Independent Gas Delivery System. Demonstration Of The Equipment Is A Must Demonstration Of The Equipment Is A Must4. Should Have Facility For Invasive And Non-Invasive Ventilation;5. The Ventilator Should Have 12” Or More Lcd Screen With Touch Facility For Display Of Waveforms. Should Have Brightness Modes Like Day/Night-Mode. The Real Time Display Of All Parameters/Waveforms Should Be Clearly Visible From All Angles6. Should Have Modes Of Ventilation Equipped With Newer Modes Of Ventilation:A) Assist/ Controlb) Volume Control Modes: Vcv, Vc-Simv, Plvc) Pressure Control Modes: Pcv, Pc-Simv, Bi-Level, Bilevel-St, Pc-Aprvd) Spontaneous Ventilation Modes: Psv, Cpap, Bilevel /Similar, Bilevel St / Similare) Prvc/Pcv-Vg/Dynamic Bilevel/Or Its Equivalent Modef) Closed Looplung Protective Mode- Asv/Nava/Wobov/Alpv/Smart Care (At Least 1 Of The Mentioned Mode Is Mandatory)G) Should Have Pav (Proportional Assist Ventilation) / Pps (Proportional Pressure Support)/ Paps (Proportional Adaptive Pressure Support)H) Cpr (Resuscitation Mode),I)Niv In All Pressure Modes7. Hfot /Nasal Cpap Breathing Therapy Should Be Capable Of Adjusting The Range Up To 60Lpm8 A) Apnea Backup Ventilation In All Modes8 B) It Should Have Weaning Analyzer Tools : Sat & Sbt9. Should Have In-Built Nebulizer With Capability To Deliver Fine Particle Size Of To Be Used In Line10. Should Have Facility To Measure And Display The Following Parameters:A) Airway Pressure (Peak & Mean)B) Tidal Volume (Inspired & Expired)C) Minute Volume (Expired)D) Spontaneous Minute Volumee) Total Frequencyf) Fio2 Dynamicg) Intrinsic Peep, V Trap & Time Constant (Rcexp)H) Resistance & Compliance11. Automatic Compliance And Leakage Compensation For Circuit And Et Tube 12. Should Have Facility Of Logbook, For Events And Alarms With Date & Time 13. Should Have Following Setting & Monitored Parametersa) Tidal Volume; Pre-Set Range For Both Pediatric & Adult Modes To Be Providedb) Inspiratory Pressure (Up To 100Cm Of H2o);C) Respiratory Rate 1 To120 Bpm;D) Apnea Back Up Rate;E) Peep: 0-50 Cmh2of) Inspiratory Flow: 0-120 Lpmg) Max Peak Flow : 280 Lpm Or Betterh) O2 Concentration: 21-100%I) Pressure Support: 1-(100-Peep) Cmh20j) Fio2 Setting Range Between 21% And 100%;K) Pressure Flow & Volume Curves;L) Loop For V-Flow, Flow-P, Flow-Paw And At Least 5 Storage Spaces For Reference Loopsm) I: E Ratio: 150:1 To 1: 299N) Ramp Time: Up To 3 Seco) Inspiratory Time: 0.2 To 15Sp) Pause Time; Exp/Insp Holdq) Pressure Trigger: Up To -10Cmh2o And Flow Trigger Up To 20 Lpm;R) I Flow/T Plateaus) Resistance & Compliance (Cdyn & Cstat)T) Leakageu) P Plateau 14. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw15. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw16. Facility To Calculate Lower And Upper Inflection Point (P/V Flex Points)Should Have Recruitment Manoeuvre17. Should Have Automatic Suction Routine & O2 Flush18. Should Have A Dedicated Bronchoscopy Function To Allow & Compensate Ventilation While Performing Bronchoscopy19. Should Have Trend Of 7 Days And Above With Facility To Transfer Through Usb Interface20. Alarms Should Be User Friendly, Audio And Visual With Text Message, System Alarm Should Be For:A) Pressure Changes (High/Low)B) Tidal Volume Changesc) Minute Volume Changesd) High Peepe) High/Low O2 Concentrationf) Power Failure And Low Batteryg) Patient Disconnectionh) Apnea 21 A) The Ventilator Should Have Facility For Co2 Monitoring. Should Have Inbuild Etco2 Interface & Software To Accommodate External Optional Volumetric Etco2 In Future21 B) Should Be Upgradable To :Metabolic Monitoring (Indirect Calorimetry).Price To Be Quoted As Optional.22. The Ventilator Should Not Weigh More Than 12 Kgs 23. Ventilator Should Have In Built Non- Consumable Paramagnetic Oxygen Sensor That Shouldnot Require Change For At Least 5 Years.24. Flow Sensor Should Be Differential Pressure Technology, Or Ultrasonic.Flow Sensor Must Be At Expiratory End. Should Be Maintenance Free, Reusable And Autoclavable.The Flow Sensor, Inspiratory Port, Expiratory Port Should Be Easily Removable Without Using Any Tools & Should Be Autoclavable.25. Should Have Usb /Serial Interface For Communications With Networked Devices26. The Ventilator Should Have On Screen Help Menu For Alarm, Ventilation Mode & Ventilator Settings. The On Screen Help Menu Should Guide User On Solving The Alarms; Providing Information On Ventilation Modes & Settings. 27. Should Support Dual Limb Circuits Of Any Make And Not Ventilator Model Specific Circuits28. The System Should Have Inbuilt Rechargeable Battery With Backup With Minimum 2 Hours29. Power And Gas Requirements: A) Power Input To Be 220-240Vac, 50Hz (100-240 Vac) B) Gas Input (Air And Oxygen) - 29-100 Psi (29-87 Psi)30. The Ventilator Should Be European Ce Certified Or Us Fda Approved, And The Manufacturing Company Should Be Iso Certified.Accessories/Consumables To Be Supplied With Main Unit I. Icu Ventilator With Trolley – 1Nosii. Reusable Adultcircuit - 1 Nos Iii. Hinged Support Arm – 1 Nosiv. Hme Filters—5Nosv. Bacterial Filters-5Nos Vi. Hepa Filetr-1Nos Vii. Test Lung -1Nos Viii. High Pressure Oxygen Inlet Hose – 1Nos , Projector With Screen Brand - Epson / Benq / Lg Cinebeam Technical Specification Ce Marked, Power Supply: 220-240 V Ac, 50/60 Hz, Transparent Lcd Panel Display System, Minimum 5200 Hours Lamp Life, Min. 5800 Lumens Brightness, Contrast Ration 10000: 1, Aspect Ratio 16: 10, Resolution Xga (1024 X 786) With Hdmi And Vga In, Lan & Usb Support, Wireless Support, Light Weight, Remote Control Etc. , Phaco Emulsifier Machine Brand-Alcon Legion / Zeiss Technical Specification 1. Operating Frequency Should Be Approx. 40 Khz 2. Handpiece: Ultralight Ultrasound 4 Crystal Piezoelectric Hand Piece. 3. Us Modes: Continuous, Pulse, Single Burst, Multi Burst, Continuous Burst, Automated Programmable Modulation (Apm) 4. Automated Ultrasound Power On Demand: Ultrasound Management Technology That Automatically (De)Activates Ultrasound Us Delivered Only When Needed Ept Up To 50% Less & Better Followability. 5. Type Of Infusion: Iop Controlled, Synchronized Fluid Exchange System That Directly Measures And Simultaneously Controls Both Infusion And Aspiration Volumes In Real-Time. It Actively Compensates For Incision Leakage. Quattro Controlled Forced Infusion. 6. Display: 24 Inches Touch Screen. 7. Iop Range: 30-120 Mmhg 8. Vacuum Range 0 To 700 Mmhg 9. Aspiration Flow Rate 0 To 120 Cc/Min 10. Aspiration Control Modes: Vacuum Controlled Mode, Flow Control Mode 11. Chamber Stability: Irrespective Of Type Of Cataract, Surgical Conditions, Leakage (0 -12 Ml/Min) It Keep Chamber Stable & Maintain Targeted Iop Throughout Procedure. 12. Iop Recovery Time After Occlusion Break 200-250Ms For Vacuum In Range Of 200 -600Mmhg. 13. U/S Tips: Coaxial Phaco With Incision Size 2.2 Mm 14. Vitrectomy: Pneumatic Cutting Device15. Type Of Vitrectomy Cutter: 23G Anterior Vitrectomy Cutter16. Anterior Vitrectomy Range:Cut Rate 30 To 5000 Cuts Per Minute. 17. Actuation Medium For Vitrectomy: Compressed Air From Internal Source 18. Diathermy: Bipolar With Fixed And Linear Control Via Foot Pedal. 19. Type Of Diathermy Handpiece: Diathermy Forceps And Diathermy Pencil Eraser. 20. Instrument Tray Arm Length: Should Be 800Mm Or More. 21. Dual Linear Footswitch 22. Should Be Usfda And Ce Approved 23. Online Ups Should Be Providedaccessories: Phaco Hand Piece(Coaxial) -2 Coaxial Handpiece Tip I – 2 I/A Bi Manual Hand Piece – 2Phaco Tip (2.2 Mm)- 10 Phaco Sleeve (Silicone)(2.2Mm) – 10 Test Charnber- 10 Tubing And Cassettes (Disposable) – 100 Diathermy Cable With Forceps – 2 Phaco Wrench-2 Vit Cutter- 23 G; Single Use – 6Sterilization Container/ Tray , Autorefractometer & Keratometer (Ark) Brand-Zeiss- Visuref 150 Technical Specification (A)Device Data.(A) Refraction(1) Sphere -25.00D To +22.00D (In Steps Of 0.12D/0.25D)(Ii) Axix 0 To 180*) (B) Keratometer(A) Corneal Curvature 5.00 To 10.20Mm (In Steps Of 0.01Mm)(B)Corneal Redraction-33.000 ?? 67.50D (In Steps Of 0.12D/0.25D)(C) Corneal Astigment-0.00D To-15.00D50d (In Steps Of 0.12D/0.25D)(D)Axis 0 To 180* (In Seps Of 1*) (E) Corneal Diameter (2.00 To 1200Mm (In Steps Of 0.10Mm) , Humphrey Fied Analyzer ( Hfa3) Brand-Zeiss Technical Specification • High Quality Goldman Standard Automated Full Field Perimetry Of International Standard With Bowl Size Radius = 30Cm. • Computer & Monitor Should Be Integrated In The Perimeter (No External Computer). • Stimulus Size I, Ii, Iii, Iv & V.• Background Illumination 31.5Asb.• Maximum Temporal Range 80Deg.Suitable For Central 30, Neurological Tests As Well As Full Field Testing. • Central Field Test Patterns 30-2, 24-2,10-2, Macula.• Peripheral Field Test Pattern 60-4, Nasal Step, Custom Test. • Threshold Test Strategies Full Threshold, Sita Standard, Sita Fast , Full Threshold, Fast Pack, Sita - Swap.• Screening Field Test P-60, Ff-80, Ff-120, Ff-240,Nasal Step For Periphery .• Screening Test Strategies Two Zone, Three Zone And Quantify Defects.• Glaucoma Hemi Field Test, Heijl –Krakau Blind Spot Monitor• Video Eye Monitoring, Gaze Tracking Monitoring System, .. Vertex Monitoring And Head Tracking. • Touch Screen On Crt Monitor, Keyboard & Provision Of External Monitor & Keyboard.•Internal Hard Disk Drive.• Stimulation Duration 200Ms, Wavelength Broad Band Visible Light• Stimulus/Background Colour White On White.• Swap (Blue On Yellow) Perimetery. • Auto Pupil Measurement. • Kinetic Testing & Custom Kinatic Testing. • Motorised Chinrest, Motorised Table, Laser Jet Printer • Glaucoma Progression Analysis ( Gpa ) Software For Monitoring Disease Progression. With Visit Wise Graph &Visual Field Index (Vfi).• Releye Monitor.• Forum Software For Archiving & Offline Analysis Of Patient Data & Gpa Analysis Etc.• Hfa Dicom Gateway. , Laser Dcr Brand-Medfin Technical Specification Applicationsdacryocystorhinostomy Amplifying Medium Diode Ergonomics Tabletop Wavelength-980Nm Average Power -8W Weight -1.2Kg (2.65Lb) , Automatic Tourniquet System With Hose Cuffs Brand - Zimmer Biomet (Model Ats-5000) Number Of Ports Dual Port Number Of Potential Cuffs Dual Cuff Dual Cuff Mounting Options Table Or Pole Mount Table Or Pole Mount Battery Type And Life Lithium Ion 6 Hrs Lithium Ion 6 Hrs User Interface Touchscreen Touchscreen International Alarm Standard 60601-1-8 Compliant Compliant Display 10.1” Color 7.0 Color Minimum/Maximum Pressure 20/600 Mmhg 50/600 Mmhg Pressure Accuracy ±3 Mmhg (20–600 Mmhg) ±4 Mmhg (50-600 Mmhg) Limb Occlusion Pressure (Lop) Allows For Patient Specific Pressure, Which Allows For The Minimum Pressureto Be Used.Yes Noline Occlusion Detection (Acoustic Reflectometry)A Kinked Pneumatic Tube Can Prevent An Inflated Cuff From Deflating, Resulting In Unintentional Tourniquet Pressure. This Alarm Alerts Or Staff That There Is An Occlusion In The Line To The Cuff.Yes , Battery Opreated Heavy Duty Drill & Saw Brand -Manman/Biotech Specifications--- Drill And Reamer Hand Piece Attachments, Oscillating/S Reciprocating Saw Hand Piece Charger And Sterilization Handpiece For Drilling & Reamingtrigger Type Single Modes Available - Reverse & Forward Modedrill Speed 1000 Rpm Approxdrill Torque 4 Nm (35+ In Lbs)Ream Torque 16.5 Nm (145+ In. Lbs)Weight Of Hp With Batteries 1250 Gms Drilling And Reaming Attachments Hudson/Zimmer/Trinkle Reamer Attachment - Yesao Reamer Attachment - Yesao Type Drill Attachment With Quick Coupling - Yesjacobs Chuck With Minimum 6 Mm - Yeskeyless Chuck -Yes Wire Driver Attachment - Yespin Driver Attachment - Yes Dhs Reamer Attachment With Quick Coupling - Yesoscillating/Sagital Saw Hand Pieceergonomic Pistol Grip Design For Maximum Comfort And Control Yes Weight Of Hp With Batteries.- 1350 Gmssaw Speed - 15000+ Cpmcutting Arc - Between 4 To 5 Degreenoise Level - 60-85 Dblspecial Blades Each For Tkr And Thr (Nos) - 10 Battery Specifications Type Of Battery Lithium Ion (Li-Ion) Number Of Batteries 2 , Electric Cautery Machine Brand - Shalya/Enertech/Eclipse/Valley Lab 1) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology 2) Unit Should Have No Of Bipolar Modes Available 3) Unit Should Have Pure Sinusoidal Output Waveform In Hf Power Output In Cut And Bipolar Modes. 4) Type Of Display Should Be Lcd Touch Screen 5) It Should Adjust Power Level Automatically Depending On Tissue Type. 6) It Should Have Two Monopolar Output Channels. 7) Bipolar Current Meter Bipolar Current Meter 8) Unit Should Deliver Two Coagulation Output At A Time With Independent Control Over Each Output For On & Off. 9) Both Channels Should Work By Foot And Hand Control. 10) It Should Complete Self Testing During Power On. 11) Power Efficiency 98 Or More Than 98 12) Availability Of Advance Cutting Modes For Regular Open Surgery 13) It Should Accept Disposable And As Well As Reusable Patient Plate. 14) Unit Should Have Tissue Feedback, Pulsed Interval-Controlled Pulse Cut Function. 15) It Should Accept Dual Area And Single Area Patient Return Electrode. Should Give Green Indication If Dual Area Patient Plate Applied To Patient & Red Indication With Alarm Tone If The Patient Plate Is Not Applied. 16) Bipolar Should Work Without Patient Plate Or Patient Plate Error Condition. 17)Bipolar Should Have Auto Facility To Start & Stop Working Without Footswitch. 18) Unit Should Have Adjustable Delay Activation In Auto-Bipolar. 19)It Should Have Randomized Spray Coagulation For Larger Area Coverage.20)It Should Be Upgradeable For Argon Delivery Module From The Same Oem.21) Unit Should Be Useful For Underwater Procedures. 22) It Should Have Alarm Facility After Completion Of Bipolar Coagulation. 23) Unit Should Have Time Out Function For Automatic Stop The Hf Output If Prolong Unintended Activation. (Optional)24) Unit Should Have Touch Key Pad For Power And Mode Selection.25) System Should Give Error For Faulty Handswitch Of Footswitch In Monopolar & Bipolar.26) Unit Should Give Error For Faulty Keypad. 27) It Should Have No Of Segments Of Display 3. 28) Unit Should Operate From 180 V To 265 V Without Using External Stabilizer. 29) It Should Have Independent Foot Switch For Monopolar Two Paddle. 30) It Should Have Independent Foot Switch For Bipolar Single Paddle. 31) Unit Should Have Facility To Connect Either Monopolar & Bipolar Footswitch.32) Unit Should Have Remote Power Setting Facility From Sterile Field With Conventional Hand Switching Pencil. 33) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. 34)Manufacturer Iso 9001: 2008 & En Iso 13485:2012 Certified Company.35) Warranty Must Be 3 Years Or Higher 36) It Should Be Supplied With Following Reusable And Autoclavable Accessories: -1. Patient Return Electrode …………………….1 No.2. Hand Switching Pencil………………………. 1 No.3. Foot Switching Pencil…………………………1 No.4. Bipolar Forceps …………………………………1 No.5. Cable For Bipolar Forceps……………………1 No.6. Monopolar Footswitch ………………………1 No.7. Bipolar Footswitch ……………………………1 No. 8. Universal Adaptor …………………………….1 No.Set Of Electrode (Angled, Ball And Needle).1No10. Trolley With Lockable Castor Wheel Should Be Supplied1. Unit Should Be Eu Ce (4 Digit Notified Body Certified)2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode 3. Availability Of Test Report From Central Govt/ Nabl/Ilac Accredited Lab Covering All Parameters. And Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. , Arthroscopy Set (Brand- Smith +Nephew / Karl Storz) Arthroscopy Set 30° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscope. Light Guide Insertion On Definitione Direction View With A J-Lock Fixation For Cannula.Working Length Of Not More Than 160Mm Optimal Centre-To-Edge Resolution For Enhanced Picture Quality Angle Of View: 30 Degree Diameter: 4Mm Arthroscopies Should Be Supplied With Compatible Cannulas High Flow, Double Valve, Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator, Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopy Set 70° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscopic Light Guide Insertion On Opposite Side Of The Direction Of View With A J-Lock Fixation For Cannula. Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator. Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopic Power Shaver System: Input Voltage Of 100 To 240V, 50/60 Hz Power Consumption Not More Than 350Va. Two Separate Receptacles For Motor Drive And Powered Instrumentation. Shaver Should Have 2 Modes Of Oscillation For Aggressive Cutting Shaver Should Have Button For Flush Lavage Of Joints On Footswitch. Autoclavable Ultra-Light Hand Piece With Suction Facility, With 3 Hand Control Buttons And Replaceable Cable Long 10Ft (3 M). Maximum Torque Should Not Be Less Than 32Oz.In And Weight Should Not Be More Than 212 Gms Pedal Style Footswitch With 3 Operating Modes I.E. Forward, Reverse And Oscillation. On-Line Lcd Display For Speed And Direction Referral. Should Communicate With The Fluid Management System Once Connected With The Cable. Camera Control Unit: System Must Have Inbuilt 4K Uhd Camera Console, Led Light Source & Wifi Enabled Image Management System With Recording Via Usb Port Along With Recording In App Through In Built Wifi. Camera Resolution Must Be 3840*2160 (Native) 4K Camera Head: Camera Head Should Have 4K, 3 Chip Mos Video Sensor Technologymust Have Transport Shock And Vibration Compliance With Ista 3Avideo Field Rate 60 Hz Must Have C-Mount Autoclavable Coupler With 19.5 Mm Coupler Length Opt For 4Mm Scopes Must Have Digital Zoom Video Data Transmission High-Speed, Low-Voltage Differential Serial (Lvds), Digital Transmission Via 12-Foot Camera Cablevideo Output Format Full Uhd 2160P, 100% Compatible With Smpte St-425-5 When Used With The Ccu Altitude: 3000 Meters Maximum 4K Monitor: Monitor Should Have Resolution 4096 * 2160 Pixels Monitor Should Support Picture Size (Diagonal) 789.06 Mm (31 1/8 Inches) 1387.8 Mm (54 3/4 Inches) Monitor Should Support Effective Picture Size 698 * 368.1 Mm (27 1/2 * 14 1/2 Inches)Monitor Should Support Pixel Pitch 0.1704 X 0.1704 Mm Monitor Should Have Aspect Ratio Of 17:09Monitor Should Have Pixel Efficiency Of 0.9999 Size Is -125Mb 1300 Seconds Video / Gigabyte Storage 10000 Images/Gigabyte Storage Airprintt Is Required. , Fess Instruments Set Nus Surgery Fess & Dcr Surgery Instruments Brand -Kalelkar / Besco Blakesley Forceps 0 Blakesley Forceps 45Blakesley Forceps 90° Thrucut Forceps 0Thrucut Forceps 45° Thrucut Forceps 90 Maxillary Sinus Forceps 30, 90, 120Hewiser Forceps Tubular Rotatable Kerrison Punch Straight Kerrison Punch Curved Backbiting Forcep Tubular Rotatable Stammberger Ostrum Punch (Mushroom Forceps)Giraffe Forceps Upturned 55, 70, 90, 110 With Vertical Or Horizontal Opening Fronntal Sinus Bougie Set Of 4Sickle Knife Sharp/Blunt Ball Probe Double Ended Right Angledball Probe With J Hook Double Endedantrum Curette Oval Or Round Cup Suction Canulla 45 Or 90° , Micro Ear Surgery Instrument Set (Ear Surgery Instruments) (Stapedectomy Instruments) Brand -Kalelkar / Besco Technical Specification Sickle Knife , Circular Knife Flag Knife , Sickle And Flag Knife Double Ended , Sickle And Circular Knife Double Ended Circular And Flag Knife Double Ended , House Curette Double Ended, Elevator Pick Straight/Curved/Right Angled , Fisch Perforator 0.3 Mm To 0.8 Mm. Hand Burr , Piston Depth Guage , Stapedectomy Instruments , Piston Cutting Jig Piston Autoclaving Box , Teflon Pistonspistion Crimper Micro Ear Scissor Belluchi Operative Ear Speculam Set Of 4 Black Slotted Or Plain Endural Retractor 2X2endural Retractor Left/Right Plester Micro Suction Canulla 116 To 24Gmicro Suction Canulla Adaptor Silicone Suction Tubecartilage Slicer , Tonsillectomy Instruments Set Brand -Kalelkar / Besco Technical Specification Davis Boyles Mouthgag With 5 Blades Davis Boyles Mouthgag With 5 Slotteddraffin Bipod Stand With Plate Tonsil Holding Forceps Tonsil Dissector Cum Pillar Retractortonsil Dissection Forceps Tonsil Artery Forceps Straighttonsil Artery Forceps Curvedtonsil Artery Forecps Negustonsil Scissor Tonsil Snare Tonsil Snare Wire +Quincy Foreps +Adenoid Curette With Cage + Adenoid Currette Without Cage + Younker Suction Canulla +B.P.Handle No 7 + Negus Knot Tier +Thrroat Instruments Tracheatomy Surgery Instruments + Tracheatomy Tube Chevalier Jackson/Fuller + Mosquito Artery Forceps + B.P.Handle No 3 + B.P. Blade No 11 + Fine Scissor 4 +Tracheal Dilating Forceps + Kilner Catpaw Retractor +Skin Hook + Single Hook Retractor +Double Hook Retractor , Nasal Surgery Instruments Set (Septoplasty Instruments) Brand -Kalelkar / Besco Technical Specificationkillians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Specularm Set Of 4 B.P. Handle No 3+Freersdouble Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator Symes Double +Suction Elevator + Lucs Forceps Round Or Heart Shape + Jensen Middleton Septum Cutting Forceps + Jensen Middleton Septum Punch Forceps + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or. Plain + Hammer (Mallet) + Submucosal Diathermy+ Needle/Ball Probe + Nasal Packing Forceps + Spring Scissor + Catspaw Retractor + Tongue Depressor + Rhinoplasty Surgery Instruments + Raps + Cricoid Hook + Jenkins Chisel + Alar Retractor + Aufritch Nasal Retractor + Ash Septum Forceps + Walsham Septum Forceps + Gillies Osteotome + Nasal Packing Forceps + Silver Nasal Chisel With Guard Left/Right + Skin Hook + Cottle Retractor + S.M.R Instruments + Killians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Speculam Set Of 4 + Freers Double Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator + Suction Elevator + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or Plain + Hammer (Mallet) , Micro Laryngeal Surgery Instruments Set Brand -Kalelkar / Besco Laryngoscope Mls Black Finish Adult/Child/Paediatric With Fiber Optic Carrier Chest Supportlaryngoscope Distending Operating Type Laryngoscope For Filling With Endoscopemls Forceps Cup Type Straight/Left/Right/Upward/Downward Mls Forceps Serrated Type Straight/Left/Right/Upward/Downwardmls Scissor Straight/Left/Right/Upward/Downward Mls Vocal Cord Spreader Mls Mini Larygeal Forceps Triangular End Mld Needle Holdermls Ssickle Knife Mls Circular Knifemls Flag Knifemls Probe 45°, 90°Mls Curettemls Handle For Use With Straight Instumentssuction Tube With Thumb Control Insulated Probe For Coagulationbronchoscope/Esophagoscope & Instrumentsbronchoscope Negue Type Any Size With Fiber Optic Carrier Esophagoscope Any Size With Fiber Carrierhypopharyngoscope (Esophageal Speculam) With Fiber Optic Carrier Forceps Alligator Grasping Single Actionforceps Peanut Soft Tissue Single Actionforceps Cub Biopsy Type Single Action Forceps Patterson Type Single Actionforceps Universal Biopsy & Grasping Single Actionforceps Alligator Grasping Double Actionforceps Peanut Soft Tissue Double Actionforceps Cup Biopsy Type Double Actionforceps Patterson Type Double Actionforceps Universal Biopsy &Ngrasping Double Action Suction Tube Rigid With Thumb Conntrol , Mastoid Surgery Instruments Set Brand -Kalelkar / Besco B.P. Handle No 4 Kilner Catspaw Retractormollison Mastoid Retractor 3X3 Mollison Mastoid Retractor 4X4mahadevaiah Modified Mastoid Retractor Left/Right Jensen Retractorjolls Retractor Periosteal Elevatoroperative Ear Speculam Set Of 4 Black Slotted Or Plain Micro Suction Canulla 11G To 24Gmicro Suction Canulla Adaptor Mastoid Suctioncanulla Set Of 4 With Thumb Grip Sickle Knifecircular Knifeflag Knife House Curette Double Ended Elevator Adsons Toothed Forceps Adsons Non Toothed Forceps Needle Holder 6 Fine Scissor 4Micro Ear Crocodile Serrated Forceps Micro Ear Crocodile Cup Forceps Micro Ear Crocodile Scissors Malleus Nipper Ball Probe 45 Degree/90 Deegre Vien Graft Pressossicle Holding Forceps , Fiberoptic Flexible Video Laryngoscopy System Brand -(Penlon / Karl Storz) Specification 1) It Should Be Very Portable And Light Weight Device With Minimum Display Size Should Be 4 Inch With High Resolution Anti Reflective Display. 2) Should Have 180 Degree Horizontal Screen Rotation With Vertical Movement For Betterclinical Assistance. 3) It Should Be A Lithium Ion Rechargeable Battery-Operated Device With Low Battery Indicator. 4) Minimum Operation Item Should Be 130 Mins. 5) It Should Have Led Light Source At The Tip Of The Blade With Minimum 2 Megapixel Cmos Camera For Better View. 6) It Should Have Channelled And Without Channelled Blade Option. 7) Should Have 4Gb Inbuilt Memory For Continuous Recording & Image Capturing. 8) Blades Sizes Should Be Size 1,2, 3, 4,5 . 9) Blade Should Be Affordable, Sterile Which Connect Laryngoscope Handle With Lock. 10) Battery Life Cycle Should Be Minimum 300 Times. 11) It Should Have Iso & Conformity To Ce. , Fiber-Optic Video Bronchoscope(Brand - Karl Storz /Olympus ) Specification Fiber-Optic Video Bronchoscope Required With Video Illumination To Visualize And Document The Operational Area On Screen. It Should Consist Of Following Features: Monitorscreen 8 To 12 Inch In Size For Display With Touch Screen To Control Features With Hdmi Output For Connecting To A Big Screen Which Can Display Picture Simultaneously On Both Screens.Monitor Should Have Two Ports To Connect Two Video Endoscopes At One Time And Pictures Can Be Swapped Using Touch Screen. Monitor Should Be Chargeable, To Be Supplied With Charger And Should Have Facility To Be Used While Charging. Monitor Resolution Should Be Minimum 1920 X 1200 Pixels In 16:9 Format.Integrated Recording Of Video & Still Images Should Be Possible On Data Card Or Usb Drive With Jpeg And Mpeg Format Which Can Be Easily Transferred To The Computer/Laptop. Documented Videos & Still Images Should Be Easily Recalled On The Monitor. Monitor Should Have A Facility To Connect Flexible Scope Directly Without Any Special Coupler Or Accessory. Monitor Should Have Picture-In-Picture & Side-By-Side Mode To View Images From Flexible Video Scopes. Monitor Should Be Splash Proof According To Ip 54 And Should Be Shock Resistant.Monitor Should Have Lithium-Ion Rechargeable Batteries And Run For At Least 100 Mins. When Fully Charged. Soft Bag From Same Manufacturer Should Be Supplied To Place The Monitor And System Can Also Be Operated Without Taking Monitor Out From The Bag. Same Monitor Should Be Compatible With All The Below Mentioned Scopes Of Same Manufacturing Principal Company .Reusable Fiber Optic Video Bronchoscope.Single Use Flexible Intubation Video Endoscope A Fiber Optic Bronchoscope Is A Medical Device Used To Visualize The Airways During Bronchoscopy, A Procedure Where A Thin, Lighted Tube Is Inserted Into The Lungs To Examine Them. The Specifications Of A Fiber Optic Bronchoscope Typically Include Its Outer Diameter, Working Length, Field Of View, Angulation Capabilities, And The Diameter Of Its Working Channel. Key Specifications:Diameter: Bronchoscopes Come In Various Sizes, With Outer Diameters Ranging From 2.5 To 10 Mm. Smaller Diameters (E.G., 4.9 Mm) Are Suitable For Smaller Patients, While Larger Diameters May Offer Better Image Quality And Suction Capabilities. King Length: The Working Length, Which Is The Distance From The Distal End Of The Bronchoscope To The Insertion Point, Typically Ranges From 30 Cm To 60 Cm. View: This Refers To The Angle Of Vision That The Bronchoscope Offers. A Wider Field Of View (E.G., 110-120 Degrees) Allows For A Broader View Of The Airways. Angulation: The Ability To Bend The Tip Of The Bronchoscope Allows For Maneuvering Into Various Airways. Up And Down Angulation Capabilities Are Typically Around 180 Degrees And 130 Degrees Respectively King Channel Diameter: The Working Channel Is The Passage Through Which Instruments Like Forceps For Biopsies Or Suction Devices Can Be Passed. It Is Typically 1.2-2.3 Mm In Diameter Other Notable Specifications: 26/25 All Above Equipment Should Be From Same Manufacturers And Usfda & Ce Approved , Anaesthesia Workstation Complete With Anaesthesia Gas Delivery System, Vaporiser, Circle Absorber System With Built In Anaesthesia Ventilator & Withmultipara Monitor Brand - -Drager/Penlon/Bpl General • Should Have Provision For Delivery Of Oxygen, Nitrous Oxide And Medical Air • The Machine Should Be Capable Of Delivering Low Flow Anaesthesia. • The Anaesthesia Machine With Circle Absorber, Ventilator And Vaporiser Should Be From Same Manufactureranaesthesia Machine Should Be Ce Notified Body Approved. • Anaesthesia Machine Should Be Cdsco Approved. Vaporizer Should Be Us Fda Approved.Should Have Independent Attachments For Connecting Central Gas Supply And Pin Indexed Cylindershould Have Non-Interchangeable Pipeline Hose Inlet Connection To Pipelines For Medical Oxygen, Nitrous Oxide, And Medical Air Should Have Large Size Pressure Gauges, For Easy Visibility, Colour Coded, Two Each For Oxygen And Nitrous Oxide; One For Airanaesthesia Machine Frame Shall Be Manufactured In Strong But Lightweight Material.The Machine Shall Have A Maximum Of Four Castors/Wheels For Manoeuvrability With Front Two Castors Having Brakesshould Have Minimum Two Non-Lockable And Spacious Drawers For Storing Accessoriesthe Frame Shall Have Gcx Compatible Channels Incorporated For Mounting Other Accessories. • The Option For An Integrated Independent Oxygen Flow Meter For Oxygen Delivery Is Mandatory. Frame Shall Accommodate Up To Two Backup Cylinders One Each For Oxygen And Nitrous Oxideon Activation Of The System On/Off Switch Gas Flow And Vaporization Shall Immediately Be Availableshould Have Selector Switch For Selecting Open And Close Circuit Operation • The Common Gas Outlet Shall Be Mounted At The Front Of The Machine (Not Rear Or Side) To Be Easily Accessible In The Event Of An Emergency And For Use Of Alternate Breathing Circuits • The Option For Illumination Of The Writing Table/Work Surface Is Mandatory • The Frame Should Have Integrated Power Outlets To Supply A Minimum Of Three External Devices • Should Have Top Shelf, Manoeuvring Handle And Footrest • Machine Should Have Table Topwork Space To Keep Drugs. • The Unit Should Have A Battery Back-Up Facility For The Ventilator In The Event Of Power Loss. Minimum 90 Minutes Battery Backup Required. • Input Power :100 – 240 Vac Gas Flow • Antistatic And Cascaded Dual Flow Tubes Should Be Available For All Gases (O2, N2o& Air) To Allow Suitable Resolution And Accurate Control At Low Total Fresh Gas Flows. • The Flow Range Shall Be 150Ml-10 Lpm • Should Have N2o Cut Off Facility If O2 Supply Fails. • Should Have Oxygen Failure Alarm Both Visual And Audible. • Should Have Oxygen Flush Facility Bypassing Vaporiser. O2 Flush Switch Should Be Conveniently Placed For Easy Accessibility. O2 Flush Switch Should Be Non-Lockable. • The Unit Shall Have A Mechanical Anti-Hypoxic Device (Ahd) System To Control The Ratio Of Oxygen And Nitrous Oxide. A Completely Mechanical Ahd System, That Requires No Electricity, Is Mandatory • The Mechanical Ahd System Must Limit Minimum Oxygen Levels To Approximately 25% • Should Have Minimum Mandatory Oxygen Flow Of 100 Ml When Switched On • It Shall Be Possible To Deliver Air With Only Basal Flow Oxygen Independent Of The Abovementioned Hypoxic Control. • Gas Flow Shall Be Controlled Mechanically Only • Visual Display Of Individual Gas Flows Is Mandatory, This Shall Be By Physical Means Such As Glass Flowmeters Independent Ofelectrical Power • Flow Meters Should Have The Option Of Backlight Illumination • In The Event Of Complete Power Loss And Battery Failure It Shall Still Be Possible To Set The Fresh Gas Flow Accurately For Each Gas, Manually Ventilate (With Bag) And Continue To Keep The Patient Anaesthetized. • Anaesthesia Machine, Vaporizer And Ventilator Should Be From Same Oem. • Provide Isoflurane And Sevoflurane Vaporizer With Themachine. Vaporizers • The Unit Should Accommodate At Least Two Vaporizers For Anaesthetic Agent Delivery. • The Manifold Should Only Accept Vaporizers With Approved Back Bar Connections And Prevent Usage Of More Than One Vaporizer Simultaneously. Preferably Selectatec Compatible Back Bar. • Vaporizers Supplied With The Unit Shall Be Routine Maintenance Free For The Life Of The Product • Vaporizers Supplied With The Unit Shall Be Manufactured From Lightweight Materials To Aid In Fitting & Removal • Should Have An Operating Flow Range Of0.2 – 15 L/Min And Nominal Capacity 250 Ml Ventilator • Ventilator Shall Cater For A Diverse Range Of Patient Groups From Neonates To Adult Patients With Restrictive Airways • Ventilator Should Be Pneumatically Driven And Controlled Electronically • Ventilator Shall Have A Large 8.4” Colourtft Display, For Exclusive Use Of Ventilator Control And Monitoring. • Control Ofthe Ventilator User Interface Shall Be By Touch Screen And Rotary Dialventilator Shall Have The Following Ventilation Abilities, Volume Control (Vcv), Pressure Control Ventilation (Pcv), Simv-V And Simv-P ,Spont/Pressure Support Ventilation (Psv),Manuaassisted Modes Of Breathing Shall Be Flow Triggered. Ventilator Shall Compensate For Fresh Gas Flow And Compliance Of The Entire Circuit. Should Have User Adjustable Alarms For Major Parameters Such As Tidal Volume, Minute Volume,Fio2,Airway Pressure, Frequency Apnea Alarms Must Be User Adjustableto Allow For All Operating Conditions And Phases During Anaesthesia Ventilator Should Have The Ability To Display Patient Spirometry Loop Ventilator Should Also Display Waveforms For Flow, Volume And Airway Pressure Stem Absorber & Not Remoted Via Tubes Or Channelsvolume Measurement Sensors Should Not Be Disposable Typeventilator Parameterstidal Volume- 10Ml-1600 Mlfrequency- 4-100 Bpm I:E Ratio- 4:1 To 1:10 Inspiratory Pause - 0-60% Of Ti Peep - Off, 3-30 Cmh2o Pressure Limit - 5-70 Cmh2o Minute Volume-0.5 To 60 Lpm Breathing System • The Breathing System Designed So That It Can Be Removed & Replaced As A Complete Unit Without The Use Of Tools • All Parts Of The Breathing System That Are In Contact With Patient Gas Shall Be Latex Free And Autoclavable Except For Non Autoclavableremovable Part Like O2 Sensor And Pressure Manometer. • Bag/Vent Switch Shall Be Integrated On The Absorber And Should Activate Ventilator In Vent Mode And Vice Versa (One Step Operation). • Breathing System Should Have Heater System To Avoid Water Condensation. • Should Have Quick Release Canister For Sodalime , Capacity Minimum 1.5 Litre • The Breathing System Absorber Canisters Shall Have A Bypass System To Allow For Canister Change Mid-Case Without Loss Of Ventilation Pressure. The Requirement For An Automatic Bypass Without Extra Input From The User Is Mandatory • The Ventilator Bellows Shall Be Clearly Visible And Be Of Upright Design.The Bellows Should Ascend On Expiration To Provide A Quick Visual Indicator For Assisted Breathing, Spontaneous Breathing And System Leaks. • Same Bellows Shall Be Used For Adult And Pediatric Application • Should Have Provision For Fio2 Monitoring Cell And Fio2 Value Should Be Monitored On The Main Screen. • A Bag Arm With Positional Adjustment Shalmulti Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Massimo),Nibp (Suntech) Temperature,Dual Ibp, Agm ( Massimo) Mainstream. 3. Should Have 12-Inch Color Lcd Display. 4. Should Have Dual Modes Of Operation: Rotary Knob. 5. Should Display 7 Waveforms Or More 6. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 7. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 8. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 9. Spo2: ? Should Have Massimo Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 10. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 11. Should Have 2 Channels For Temperature Monitoring 12. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. O 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 13. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 14. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. 19.Monitor Should Be Able To Directly Connect With Hospital Information System (His 20.Should Have Standby And Night Mode 21.Should Have Li-Ion Battery 22.Battery Should Have 3.5 Hrs Of Operation 23.Monitor Should Be Ce Certified 24.Manufacturer Should Be Iso Certified 13485:2016 , Bi-Phasic Defibrillator Brand - Bpl/Maestros Technical Specifications For Bi-Phasic Defibrillator • The Machine Should Have Facility For Ecg Monitoring, Bi-Phasic Defibrillation,With Facility To Print Ecg Through In-Built Thermal Printer,• Should Be Extremely Light-Weight (Less Than 10 Kgs) • Should Have Monitoring Facility Through Color Tft Display With Screen Size At Least 7” Or Better. • Should Have Both Synchronous And Asynchronous Mode. • The Defibrillator Should Be Biphasic Technology Based Having Energy Selection Of 2-300 Joules• It Must Be Capable Of Monitoring Ecg Through Ecg Cables, Multi-Function Electrodes And External Paddles. • The Machine Should Be Able To Defibrillate Adult, Paediatric Patients. • The Machine Should Have Ecg Wave Form Display On Bright Screen Along With Other Vital Numeric Information. • Should Be Able To Monitor Ecg• Should Have Facility For Auto Testing When Switched On And During Operations. • The Machine Should Be Compact, Portable With Built In Rechargeable Battery. • Should Have External Pacemaker With Fixed Or Demand Mode. • Should Be Able To Deliver A Maximum Of 300J In Aed Mode • Should Have A Minimum 2 Hours Battery Capacity For Monitoring And 1 Hour Battery Capacity For Giving Minimum Of 100 Shocks.• Energy Selectiononfront Panel Button And External Paddle Buttons • Charge Control On Front Panel Button And External Paddle Buttons • Charge Indicator Charging Tone, End Of Charge Tone, Led In Charge• Shock Control Buttons On The External Paddles • Should Have External Defibrillator Adult And Paediatric Paddles.• Charging Time - Less Than 8 Seconds At 300 J With A New And Fully Charged Battery • The Machine Should Have User Selectable Alarm Settings• The Machine Should Store At Least 24 Events For Viewing Or Recording.Ecg: • Should Be Able To Monitor Ecg Through 5-Lead Patient Cable • Should Be Able To Display Lead I,Ii,Iii, Avr, Avl, Avf And One Of The Chest Leads• Should Be Able To Monitor Heart Rate From 15-300 Bpmgeneral Specifications• The Machine Should Work On Mains As Well As Rechargeable Battery. • The Device Should Be Manufactured From An Iso Certified Organization• Machine Should Be Supplied With Standard Accessories• System Should Be Easy To Operate With Facility To Give Print Command, Charge And Energy Selection On Both External Paddles And On The Main Unit.• Should Have Upgradable Facility For Masimo Etco2.• Should Have Upgradable Facility For Spo2.• Should Have Upgradable Facility For Nibp.• Should Have Upgradable Facility For Pacer Also. , Multi Para Monitor With P, Nibp, Ecg Facility (Brand - Bpl/Maestros/Drager)) Technical Specifications For Multipara Monitor 1. Multi Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Oxyset+), Nibp (Suntech) Temperature. 3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have 12-Inch Color Lcd Display. 5. Should Have Dual Modes Of Operation: Rotary Knob. 6. Should Display 7 Waveforms Or More 7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 8. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 9. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10. Spo2: ? Should Have Nellcor Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 12. Should Have 2 Channels For Temperature Monitoring 13. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 14. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 15. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. , Fully Functional Automatic Dental Chair With Inbuilt Suction And Compressor (Brand- Confident / Chamundi) Programmable Dental Chair, Unit Fitted With Floor Mount Light With Led(Faro, Maia) Operating Light Having, On/Off And Intensity Control By Non-Touchsensor Monitor Mounting Arm High And Low Vacum Motorized Crs Suction System Autocalvable 2 Nos Beecool Ii Light Cure Cordless-1 No Modular Trolley System Over The Patient Airotor Points- 2 Nos Supreme Micromotor 35,000Rpm With Digital Display Of Speed Three Way Syringe- 1 Nos Supreme Optic Scaler With Five Scaling Tips With Endo Chuck 1 No Ss Instrument Tray X-Ray Viewer Multi Function Foot Control Comfort Dental Operators Stool Compressor Monobloc Oil-Free Medical Grade Airotor Air Compressor 1.5/2 Hp With Radiator Cooler, Condensor, Silicon Column Filter For Moisture, Dust Filter Microbial Filter Fitted On Ms Tank. , Dental Aerotor(Brand - Nsk) Push Button With Led Light , Dental Micromotor Contrangle(Brand - Nsk) Latch Type , Dental Micromotor Straight With Led Light (Brand - Nsk) , Round, Straight Surgical Bur For Straight Hand Piece Micromotor Carbide Burs(Brand - Nsk/Prima) , Round, Straight, Inverted Cone And Tapered Fissure Burs For Aerotor Diamond Fg (Brand- Dent Ark) , Rotary Files Niti Files Sx, S1 S2 F1 F2 And F3 (Brand- Dent Ark /Nsk) , Ultraound Color Doppler System (Brand -Samsung Hs30/ Ge Logiq / Mindray Mx7 (3D,4D)/Bpl) Technicalspecification 1. The Units Should Be Latest State Of The Art Digital Color Doppler With Broadband Beam Forming For Cardiac, Abdominal,Vascular And Ob/Gynapplication. The Models With Following (Or Higher) Specifications Need To Be Quoted. 2. The Machines Should Be Usa Fda And European Ce Certified And Should Be Latest In Technology And Launched In 2016 Or Later. The Manufacturing Company Should Be Iso Certified. 3. They Should Have At Least 750000 Digital Processing Channels For High –Resolution Imaging. 4. Imaging Modes : 2D, M- Mode, Color Flow Imaging, Pulse Doppler, Power Doppler, Continuous Wave Doppler And Directional Color Flow Mapping, 3D/4D Imaging Modes 5. The Machine Should Be Supplied With Dedicated 3D/4D Package 6. The Machines Should Have Facility For Simultaneous Dual/ Duplex/ Triplex Mode Display 7. Tissue Harmonic Imaging Should Be Available On All The Transducers. 9. Machines Should Be Capable Of Advanced Real Time Compound Imaging. 10. Should Have Frame Rate 1500 Fps Or More 11. Scanning Depth Should Be 40 Cms Or More 12. High Dynamic Range Of 250 Db Or More. 13. The Machines Should Have 256 Grey Shades (8 Bit) Or More. 14. One Touch Image Optimization Should Be Available In 2D Mode With One Button Automatic Adjustment Of Tgc And Receiver Gain And Compression Curve Based On The Range Of Detectable Tissue Signals. 15. There Should Be One Button Automatic Adjustment Of Doppler Prf, Baseline, Dynamic Range And Gain In Doppler Mode. 16. Pulsed Wave Doppler Should Be Available On All Imaging Transducers With Adjustable Sample Volume Size, Simultaneous Or Duplex Mode Of Operation, Simultaneous, 2D, Colour Doppler, Pulsed Doppler, High Prf Capability In All Modes Including Duplex And Triplex And Automatic Adjustment Of Scale And Baseline. The System Should Have Option To Adjust The Color Flow Mode For High Or Low Flows In One Touch. 17. Machines Should Support Broad Band/ Wide Band High Density Probes Spanning With Frequency Range From 1-20 Mhz (+/- 1 Mhz). The System Should Support Latest Technology Single Crystal Probe Or Matrix Array Probes For Better Resolution And Penetration. 18. Automatic Doppler Analysis Should Be Available With Automatic Real Time Calculation Of At Least Sixof Following User Selectable Parameters Peak Systolic Velocity End Diastolic Velocity, Mean Diastolic Velocity, Volume Flow, Time Average Mean Velocity, Time Average Peak Velocity, Resistive Index, Pulsatility Index, Systolic/ Diastolic Ratio, Acceleration/ Deceleration Times. 19. The Machine Should Have Up To 500000 Images Storing Facility And Cine Loop Review Facility With Memory Up To Minimum Of 25,000 Frames 20. The Machines Should Have Facility Of Direct Storage And Retrieval Of B/W And Color Images (Both Frozen And Cine Loop) In The Inbuilt Hard Disk Drive. In Built Hard Disk Storage Should Be Equal To Or More Than 1Tband Solid State Device In Addition With Capacity 120Gb. 21. The Machines Should Support Four Or More Transducers With Universal Ports Allowing Any Transducer To Be Connected To Any Port. 22. Machines Should Have A High Resolution Fully Articulating Non-Interlaced Flicker Free, Anti-Glare Led Display Of 21 Inches Or More With Resolution 1,920X 1,080 Or Better.In Addition, The Machine Should Have 10” Or More Touch Control Panel For Easy Access. 23. The System Should Have Image Enhancement Options Like Speckle Reduction, Spatial Compounding And Filtered Tissue Harmonics. The System Should Have Adaptive Blending Color To Maintain The 2D Resolution While Working In Color Mode. 24. Zoom Facility (Upto 8 Times Or More Magnification) With High Resolution Results And Pan Capacity In Both Real Time And Frozen Images. 25. The System Should Have Cd-Dvd And Usb Archival (Dicom And Pc Format).There Should Be 4 Or More Usb Ports. 26. Machine Should Be Offered With The Following Broadband Probes (I) Cardiac Package Along With Adult Phased Array Transducer With Frequency Ranging 1.0 - 5.0Mhz (+/- 1.0Mhz). (Ii) Convex Transducer Frequency Ranging ( C1-6Ct) Mhz. (Iii) Liner Transducer Frequency Ranging (L3-12T ) Mhz (Iv) Tvs Transducer Frequency Ranging (Ec3-10T) 27. Online 1Kva Upsand Color Inkjet Printer 28. Preference Would Be Given To Products Manufactured In India, Japan, Korea, Europe, Us. , Laproscopic Surgery Set With Hysteroscope And Resectoscope (Brand Ethicon/ Mindray Medical Pvt Ltd/ Karl Storz/ Conmed/Olympus) Unit And Camera Head The System Should Have The Full Hd Resolution-1920 X1080 Internal Medical Grade Recorder For Capturing Full Hd Videos And Full Hd Stills With Storage Capability Internal Of 50 Gb Or External Medical Grade Recorder Should Be Provided From The Same Manufacturer. System Should Have The Facility Of Controlling The Recording Device From The Camera Head. Video Scopes Can Be Connected To The Same. The Camera System Should Be Able To Provide With 1080 P Lines For Hd Resolution Image. Technical Specifications: Image Sensor: 1 Xcmos Agc: Microprocessor Controller Weight: 130Gm Focal Length: 16Mm Control Buttons: 3 (2 Of Them Freely Programmable) Input: Keyboard Input For Character Generator. Power Supply:-100-240 Vac 50/60 Hz Certified To: Iec 601-1, 601-2-18, Csa 22.2 No. 601, Ul 2601 And Ce According To Mdd, Protection Class1/Cf 2 High-Definition Medical Grade Monitor Led Crystal Display. Max. Resolution Of 1920X1080. Screen Diagonal - 27Inches Desk Top With Pedestal. Should Have The Facility Of Pip Mode. Accessories External 24Vdc Power Supply, Mains Cord, Pedestal. Certified To: En 60601-1, Protection Class Ipx 1 Led Light Source With Fiber Optic Cable Color Temperatures 6400K External Light Source Light Outlets - 1 Light Intensity Adjustment: - Continuously Adjustable Manually From Light So Should Be Supplied With Light Cable, Diameter 4.8Mm, Length 250Cm. Certified To :- Iec 601-1 & Ul 544 Ce According To Mdd, Protection Class 1/C Telescopes Forward Oblique 30 Degree Telescope, Diameter 10 Mm, Autoclavable, Length Optic Light Transmission Incorporated. Forward Oblique 30 Degree Telescope, Diameter 5 Mm, Autoclavable, Length 2 Optic Light Transmission Incorporated Co2 Insufflator Technical Specifications: Gas Flow: 0-400 L/Min Cv 625 Laprascopy Set Pressure: 0-30 Mmhg (4000Pa). High Flow Mode (0 To 40 L/Min.) Sensitive Mode Pressure 15 Mm Hg & Flow 15 L/Min For Sensitive Application Electronic Control And Colour Touch Screen, Following Data Are Displayed On Touch Screen: -Insufflation Mode. Set Value Pressure (0-30 Mmhg). Current Patient Pressure. Set Value Gas Flow (0-40 L/Min). Current Gas Flow. Gas Consumption (0-999 1). Reusable Insufflation Tube For Co2 Gas Up To Patient Body. High Flow Mode With Flow Performance Up To 40 L/Min. Easy And Intuitive Use With User Friendly Color Touch Screen 7 Inch For Easy And Precise Setting Of Set Values For Pressure And Flow And Of Insufflation Mode, As Well As For Clear Display Of Corresponding Set Values And Actual Values. Optical And Acoustic Alarm Signals In The Event Of Patient Overpressure Should Have Hose Pipe. Equipment Cart From The Same Manufacture Should Be Quoted With 4 Or More Helves Isolation Transformer Co2 Cylinder Holder Laparoscopic Instruments- Detailed Description • Veress Pneumoperitoneum Needle With Spring Blunt Stylet, Luer-Lock, Length 13 Cm & 15 Cm –2 Nos • Trocar, Size 11 Mm, Color Code: Green, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel, With Washers Pack Of 10 – 4 Nos • Trocar, Size 6 Mm, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel With Washers Pack Of 10 – 4 Nos • Reduction Sleeve, 11/5 Mm – 1 Nos • Reducer 11/5 Mm– 1 Nos • Telescope, Diameter 10 Mm, Length 32 Cm, Autoclavable, Variable Direction Of View From 0°-90, Adjustment Knob For Selecting The Desired Direction Of View, Fiber Optic Light Transmission Incorporated- 1 Nos •Injection Needle, Luer-Lock, Diameter 1. 2 Mm, Size 5 Mm, Length 36 Cm - 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 3 6 Cm, Right Angled, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert, And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Long, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting- And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Alligator Jaws, Double Action Jaws, Consisting Of: Plastic Handle Without Ratchet, With Larger Contacact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Siz E 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Long, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, 2 X 4 Teeth, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle With Manhes Style With Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Bowel Grasper, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube, Insulated., Three Parts Dismantle 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Cleaning, Single Action Jaws, Atraumatic, Fenestrated, Curved, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet Metal Outer Sheath, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Plece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Heavy, Double Action Jaws, Consisting Of: Plastic Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel – 1 Nos • Three Plece Scissor, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Deaning, Double Action Jaws, Curved, Length Of Blades 15 Mm, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Insulated, Without Ratchet Metal Outer Sheath, Insulated Scissors Insert For Use With Trocars Size 6 Mm Three Part Dismantel 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) 1 Nos • Three Piece Laparoscopic Hook Scissors, Rotating, Size 5 Mm, Length 36 Cm, Jaws Not Crossing With Connector Pin For Unipolar Coagulati On, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Outer Tube, Insert, Three Parts Dismantel 1 Nos • Three Plece Laparoscopic Autoclavable Grasping And Dissecting Forceps, Single Action Jaws, Fenestrated, 360 Degree Rotational Sheath, Size 5 Mm, Length 36 Cm, Long, Ergonomic Metal Handle With Plastic Finger Rings With Larger Contact Area At The Finger Ring To Avoid Pressure Sores, Can Be Dismantled With The Press Of A Button. 1 Nos • Suction And Irrigation Tube, Anti-Reflex Surface With Two-Way Stopcock, For Single Hand Control, Size 5 Mm, Length 36 Cm 1 Nos • Olsen Suction Or Irrigation Tube, With Protection Basket, With Trumpet Valve, Size 10Mm Length 36Cm. 1 Nos • Dissecting-Electrode, L-Shaped, Size 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Consisting Of: Outer Tube, Insulated Plastic Handle Electrode L-Shaped With Trumpet Handle 1 Nos • Coagulating And Dissecting Electrode, L-Shaped, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Coagulating And Dissecting Electrode, Spatula-Sheaped, Blunt With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Macro Needle Holder, Ergonomic Axial Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Left Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Macro Needle Holder, Ergonomic Pistol Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Right Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Dismantling Needle Holder, Ergonomic Pistol Grip With Disengage Able Ratchet, Ratchet Release On The Left Side, Jaws Curved Left, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm Consisting Of: Insert, Outer Tube, Handle 1 Nos • Unipolar Hf Cord With 4Mm Banana Plug And Length 300 Cm 1 Nos • Clip Applicator, For Use With Ethicon Titanium-Clips Lt-300 (Medium Large), Dismantling, Rotating, With Ratchet To Lock The Jaw Part Holding The Clip, Size 10 Mm, Length 36 Cm, Consisting Of: Metal Handle, With Ratchet Metal Outer Tube Insert, Three Part Dismantel, 1 Nos • Claw Forceps, Rotating, Size 10 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Metal Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Claw Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube 1 Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Especially Suitable For Dissection, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Fine Atraumatic Serration, Fenestrated, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1 Nos • Bipolar Hf Connecting Cable Length 300 Cm, Compatible With All Standard Cauteries – 1 Nos • Fascial Closure Instrument For Sub Cutaneous Ligature Of Trocar Incisions – 1 Nos • Myoma Fixation Instrument, Screw Shaped, 5 Mm. – 1Nos • Dismantling Fan Retractor, Distendable, Size 5 Mm, Length 36 Cm.- 1 Nos • High Frequency Needle, For Splitting And Coagulation, Insulated, Retractable, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 31 Cm. 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) - 1 Nos • Uterine Manipulator: Uterine Manipulator For Providing Tissue Tension Needed For Anatomical Surgery. The Manipulator Should Have Application In Tlh, Lash, Lavh And Hysterectomies For Malignant Pathologies 1 Nos • Sterilization Tray For 2 Telescopes (Same Manufacturer) • Sterilization Tray For Instruments (Same Manufacturer) Hysteroscopy Set Hysteroscope Sheath For Diagonostic Continuous Irrigation Size 6.1-6.3Mm Outer Sheath And 5.1-5.3 Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. Hysteroscope Sheath For Operative Continuous Irrigation Size 5.9-6.1Mm Outer Sheath With Operating Channel 5Fr, Leur Lock Adaptor And 5.3-5.5Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. With Stopcock & Leur Lock Adaptor And Inflow And Outflow Channe Semi Rigid Instruments For Use With Operating Hysteroscope Scissors Semi Rigid, Blunt Tips, 5 Fr., Length 36-40Cm, Single Action Jaws Scissors Semi Rigid, Pointed Jaws, 5 Fr., Length 36-40Cm, Single Action Jaws, Semi-Rigid Biopsy- And Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Tenaculam Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Bipolar Vaporization Electrode, Semirigid, 5 Fr., Needle Electrode Angled 90°, Length 42Cm Bipolar High Frequency, Should Fit In Most Of The Standard Electrosurgical Unit Having Bana Plug One Side, Length Should Be Not Less Than 250Cm Telescope 12, Enlarged View, Diameter 4 Mm, Length 30 Cm, Autoclavable, Fiber Optic Light Transmission Incorporated Bipolar Working Element To Be Used With 26 Fr Resectoscope Sheath: Motion By Means Of A Spring. The Thumb Support Is Movable. Return Of The Loop Is Control By The Thumb And In Rest Position The Electrode Should Rest Inside The Operating Sheath, To Be Used With 4Mm Hysteroscopy Telescope. Should Work In Saline Bipolar Cutting Loop 24 Fr Should Work In Saline Cutting Electrode 24Fr, Bipolar, Pointed, Should Work In Saline Coagulating Electrode 24Fr, Bipolar, Ball End Should Work In Saline Continuous Flow Resectoscope Sheath 26 Fr., For Bi-Polar, Including Connection Tubes For And Outflow, 2 Luer-Lock Adaptors, 26Fr, Oblique Beak, Rotating Inner Tube, With Ceramic Insulation, For Use With Working Element. Should Work In Saline Obturator, For Use With The Resectoscope Sheath. Fluid Management System (Irrigation & Suction Unit) Pressure Regulated Suction And Irrigation System For Use In Laparoscopy And Gynaecology Unit Should Have Touch Screen As User Interface. Unit Should Have Feature Of Automatically Fixing Maximum Parameters For Laparoscopy And Hysteroscopy Mode By The Choice Of Tubing Unit Should Have Feature Of Simultaneous Display Of Set Values And Actual Values Enabling User For Continuous Monitoring Of Suction And Irrigation Parameters Unit Should Have Feature Of Use Of Disposable/Reusable Cassette Tubing Set For Laparoscopy/Hysteroscopy Procedures. Unit Should Be Supplied With Glass Suction Bottle 5 Lite Unit Should Have Pressure Settings: Hysteroscopy Mode: 0-200 Mmhg Laparoscopy Mode: 100/300/500 Mmhg Unit Should Have Flow Settings: Hysteroscopy Mode: 200/400/600 Ml/Min Laparoscopy Mode: 0-1300Ml/Min Suction Pressure Regulated: Hysteroscopy Mode: 0.1-(-)0.8Bar (-80Kpa) Laparoscopy Mode: 0.1-(-)0.8Bar(-80Kpa) Power Supply: 100-240Vac, 50/60Hz Certified To: Iec 601-1, Ce Nach Mdd Certified To: Iec 601-1, Ce Acc. To Mdd Note: - All The Above Items Should Be Usfda And European Ce Certified And From Same Manufacturer For Better Compatibility And Maintenance , Integrated Electrosurgical Unit And Vessel Sealer Brand -Ensurge/ Hti Digital / Kls Martin / Enertech/Shalya Specifications For Integrated Electrosurgical Unit And Vessel Sealer 1) Advanced Electro Surgical Unit With Vessel Sealing System Have Mono Polar Cut & Coagulation, Bipolar And Vessel Sealing Technology, All Integrated In Single System 2) Type Of Display Should Be Lcd Touch Screen 3) Display Size Should Be 5” Or More 4) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology. 5) The System Should Have Capability To Convert Electrical Energy To Radio Frequency Energy Thus Providing Radio-Frequency Seal 6) Number Of Tissues Sensed Per Sec Should Be 4000 Or Higher 7) Vessel Fusion System Must Be Able To Seal Artery, Veins Along With Tissue Bundle Up To & Including 7Mm In Diameter & Sealed Vessels Should Be Able To Withstand At Least 3 Times The Systolic Blood Pressure. 8) Low Frequency Leakage Should Be 50 Or Higher (In Ma) 9) High Frequency Leakage (Rf) Must Be Less Than 100Ma In Mono Polar And Vessel Sealing Mode And Less Than 70Ma In Bipolar Mode 10) Should Be Provided With Rs 232 Data Input Port For Software Upgrade Facility 11) System Must Have Recall Facility To Recall The Last Setting Used By User Before Turning Off The Power Directly Or Through User Programs. User Can Use Pen Drive With Their Setting To Recall The Setting Saved By Them. 12) System Should Have Bipolar Resection Including Under Water Cutting. 13) The System Should Be Provided With Twin Monopolar Socket (Only One Socket To Be Activated At A Time) With Independent Power Setting 14) 5 Or More Numbers Of Cutting Modes Available In Monopolar 15) Maximum Power Should Be 400W Or Higher 16) Maximum Power Of Blend Mode For Cutting With Homeostasis Should Be Not Less Than 250W 17) Fulgurate/Forced Mode, Spray Mode, Soft Mode Of Monopolar Coagulation Should Be Available. 18) Unit Should Be Supplied With 4 Or More Nos. Of Monopolar Coagulation Modes 19) Coagulation Mode Power (Monopolar) Should Be 150W Or Higher 20) Coagulation Mode Power (Bipolar) Should Be 120W Or Higher 21) Number Of Bipolar Cutting Modes Should Be Or Greater Than 5 22) Maximum Power For Ligation Not Less Than 100W 23) Maximum Power For Resection Not More Than 300W 24) Equipment Should Have On Screen Review Of Error Codes And Diagnostics. 25) System Should Have Patient Plate Contact Quality Monitoring System Giving Audio-Visual Alarm And Deactivating Output If Contact Between Patient And Patient Plate Is Not Proper To Eliminate The Risk Of Patient Burns. It Should Be Mandatory, Should Have Contact Quality Monitoring With Split Style Patient Return Electrode And Deactivates Output If Contact Between Patient And Patient Return Electrode Is Not Proper To Eliminate The Risk Of Patient Burns, Manufacturing By Same Oem 26) Auto Bipolar Start And Stop Along With User Configurable Auto Start Facility Should Be Available 27) Power Output Of Vessel Sealing System (Vss) Not More Than 150W 28) Vessel Sealing System Should Be Able To Seal Vessels Or Tissue Bundles Faster Than Any Conventional Devices (Preferably Within 2-4 Seconds) 29) Product Should Be Ce Certified (4 Digit Notified Body). 30) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification & Iso 9001: 2008 & Iso 13485:2003 Certified Company. 31) Warranty Of The Unit Should Be 5 Years 32) It Should Be Supplied With All Following Accessories, Should Be Reusable And Autoclavable: - O Patient Return Electrode --- 1 No. O Cable For Return Electrode --- 1No. O Hand Switching Pencil --- 1 No. O Foot Switching Pencil --- 1 No. O Double Pedal Footswitch With Toggle Function (Common/Individual For Monopolar, Bipolar And Vessel Sealing) - 3 No. O Universal Adaptor --- 1 No. O Bipolar Forceps --- 1 No. O Cable For Bipolar Forceps --- 1 Nos. O Set Of Electrode (Angled, Ball And Needle) ------ 1No. O Reusable Sealing Clamp With Cable--- 1 No. O Curved Jaw Vessel Sealer 5 Mm, 32 To 37 Cm -- 1 No. O Autoclavable Reusable Cutting Instrument – 1 No. Additional Terms & Conditions: 1. Vessel Sealing Laparoscopy Instruments Should Have Both Hand And Foot Activation Mode And Should Be Eu Ce (4 Digit Notified Body Certified) Or Usfda Approved. 2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode. 3. R.F. Frequency Should Be In Between 350-500Khz For All Modes. 4. It Should Have Bipolar Rf Scalpel Mode For Dissection & Desiccation. Rf Bipolar Scalpel Instruments Should Have Hand Control Button For Coagulation & Cut. 5. Equipment Should Be Usfda Approved/ Eu Ce (4 Digit Notified Body Certified). It Should Have Iec-60601-1- 1, Iec 60601-2-2 Safety And Des , Ctg Machine Brand - Bpl/Maestros/Bistos Specification Foetal Monitor With Display And Printer Should Have 12.1” High Resolution Colour Tft Display With Tiltable Screen For Better Viewing. Should Display Fhr, Toco, Foetal Movementin Numeric Values . Should Display 2 X Fhr And Toco Graphs In Different Colours. Should Have The Facility For Data Save With Play Back & Print Facility Should Have Facility To Monitor Information Of Last 25 Hours Should Have Special High Sensitive Watertight Probe For Better Durability Should Have The Low Ultrasound Power For The Safety Of The Foetus Should Have Automatic Foetal Movement Detection Should Have Event Marking Facility By Mother And User Thermal Printer With Minimum 152Mm Paper Width Is Essential For Broader Printouts Standard Configuration Should Be Fhr, Toco, And Foetal Movement Should Have Volume Control For Fhr Beep Sound And Alarm. Should Have Alarm Setting For Weight Should Be Less Than 4 Kg For Easy Portability. Should Have Foetal Stimulator Built In To Fhr Probe And Activation Key Should Be There On The Front Panel. Stimulation Should Be Recorded On The Recording Paper And Should Be Displayed On The Screen. Built In Rechargeable Li-On Battery For Backup Should Work With Input 200 To 240Vac 50 Hzsupply Central Monitoring System Software Upgradability Should Be Possible (Optional) Should Be Supplied With The Following Standard Accessories: Power Cord- 01 Fhr Probes – 01 Nos Toco Probe -01 Patient Event Marker Belts – 02 Nos Gel – 1 Bottle Thermal Paper- 02 No , Digital Video Colposcope Brand - Bpl/Maestros/Bistos Specification 1. Should Have Led Cold Lighting System Reproduces An Original View Of Tissue. 2. Led Lights Are Replaceable. 3. Should Have Advanced And Fast Auto-Focusing System To Ensure Clear Image. 4. Should Have Remote Capture Control And User-Friendly Keyboard Layout For One Handed Operation. 5. Should Have Electronic Green Filter That Enhances Vascular Image Display Without Compromise Of Illumination. 6. Should Have Working Distance Of 6.7 - 11.8 (170 - 300 Mm). 7. Should Have Magnification Of 1X - 36X. 8. Should Have Resolution Of 3,80,000 Pixels Or More 9. Should Have Horizontal Resolution Of > 470 Lines. 10. Should Have Field Of View Of 0.4 - 5.9 (10 - 150 Mm). 11. Signal/Noise Ratio Should Be = 50 Db. 12. Should Have Signal Output Of S-Video, Pal/Ntsc. 13. Should Have Acetic Acid And Iodine Reaction Test Timer To Precisely Detect Low/High Grade Cin. 14. Should Have Real-Time Display Of Magnification. 15. Should Have Powerful Colposcopic Findings Gallery For Comparison Analysis. 16. Should Have R-Way Evaluation Program Supports Cervical Disease Diagnosis Guidance For Clinical Users. 17. Should Have Dicom 3.0 Supportive. 18. Should Be Manufactured By An Iso Certified Company , Vessel Sealing Device For Open Surgery Shaft Length-23Cm Curved Tip (Box Of 6)(A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology. Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A} Curve Jaw Vesselsealer B) Should Be Able To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. C) Sealing Should Withstand 3 Times Systolic Pressure. D) Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 23 Cm; Shaft Diameter 5 Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. Technical Specification For , Vessel Sealing Laparoscopic Surgery, Shaft Diameter-5Mm, Length-37 Cm Jaw Type Curved Jaw Double Action With Contoured Tips, Shaft Rotation 350 Degrees, Jaw Surface-Textured Ceramic Stops.Jaw Aperture-13Mm Seal Plate Length- 20.3(Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Blunt Tip Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Sealing Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm D) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness:Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. E) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Instrument For Open Surgery, Instrument Length 20.6Cm-21 Cm, Curved Jaw, Hand And Foot Switching(Box Of 6). Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Exact Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 21 Cm. D) Curved Jaw In 28 Degrees, Seal Length 19.3Mm, Cut Length: 18.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device Laparoscopic Surgery. Shaft Diameter-5 Mm, Maryland Jaw Curved Device Length 37Cm (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec B) Sealing Should Withstand 3 Times Systolic Pressure. Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm; Shaft Diameter 5 Mm C) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation D) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device For Open Surgery With Shaft Length 18.8 Cm, Jaw Type-Curved Jaw (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Small Jaw Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 18.8 Cm. D) Curved Jaw In 28 Degrees, Seal Length 16.5Mm, Cut Length: 15.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Ethelene Oxide Sterlization Machine ( Brand - Steri Techno Fab/ Map Industries) 1) Eto Gas Sterilizer Should Be Fully Automatic Type With Software-Controlled Operation System For Low Temperature Sterilization Of Heat And Moisture Sensitive Medical And Surgical Items. 2) The Chamber Should Be Preferably Rectangular With Capacity Of 250 Litters Or 9 Cu. Ft. & Dimension 48”(L) X18”(W)X18”(H). 3) The Operating System Should Be Programming Logical Controller Based And Should Have Touch Screen Human Machine Interface From Where User Should Operate And Observe The Cycle . 4) The Inner Surface Should Be Smoothly Finished To Minimize Gas Deposits. 5) Manufacturer Should Provide The Test Report To Prove Conformity To Specification And Ability Of Eto Unit To Achieve Complete Pathological/Microbiological Elimination. The Test Of Report Has To Be Attached With Technical Bid Document. 6) Surface Heaters Should Mount On The Chamber For Uniform Temperature In Chamber Throughout Cycle. 7) Less Noisy And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 8) The Machine Should Be Provided With Plc Based Automation Along With Lcd Hmi Which Allows The Operator For: (A) Change And Set The Parameters (B) Run The Cycle According To Pre-Selected Cycles. (C) Monitor Various Phases / Individual Parameters During The Process. (D) View On/Off Status Of The Various Components Of The Machine While The Cycle Is In Progress. 9) It Should Have Password Protection For Unauthorized Access & Analogue Input Of Process Pressure/Vacuum. 10) It Should Have Digital/Analogue Input For Temperature & Temperature Should Be Indicated In The Sterilization Area, By The Use Of A Temperature Sensor. 11) One Pressure/Vacuum Sensor For Display Of The Current Pressure/Vacuum, That The Load Should Be Subjected To, At All Times During The Process. 12) The Software Should Provide & Maintains Total Records Required For Process Parameters During The Sterilization Cycle. These Records Are Necessary For Meeting Ce Or En 1422 Norms Of Sterilization. 13) All The Fittings For The Accessories And The Main Vessel Should Be Fabricated From Ss 304 Stainless Steel. All The Valves Used In The Process Lines Should Be Ss 304/Brass/Teflon Construction Ball Valves. (All Standard Makes) 14) Pressure Testing And Vacuum Testing As Per Specified Standards. (1.5 Times The Working Pressure) 15) Automatic Operations As Well As Manual Operations In Case Of Technical Problems Should Be In Plc/Hmi. 16) Machine Should Not Open During Sterilization Process, It Should Be Open Only After Complete Cycle Of Sterilization. 17) It Should Be Plc Based Automation System. Plc Should Be Honeywell Or Siemens. System Should Be 21 Cfr Compliances. 18) Automation Should Be 7’’ Touch Screen Display Of Schneider Or Proface Or Equivalent. 19) The Construction Of Chamber Should Be Of Ss316 Grade Stainless Steel. 20) There Should Be Interlocks With Door Mechanism So Cycle Should Start Only After Closing Of Door. 21) Cartridge Puncture Operation Should Be Automatic Into The Chamber No Need Of Manual Puncturing. 22) In Case Of Cartridge Puncture There Should Be Alarm System. 23) One Complete Cycle Should Be Containing All Phases. Time Based Parameter Should Be Mention In Non-Editable Data Sheet. 24) Temperature, Pressure, Humidity, And Other Parameters Should Be Display In Hmi Screen. 25) It Should Be Noise Proof And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 26) It Should Be In Built Aeration Phase To Remove Residual Gas Out From Sterile Item. 27) Pre-Requisite Sequence Phases Should Define To Run Cycle In Auto Mode. 28) Pre-Sterilization Phases Should Define To Create Proper Condition For Sterilization (I.E. Humidity& Temperature). 29) Post-Sterilization Phases Should Define To Remove Residual Gas From The Product. 30) Machine Should Have Manual Override Operating Facility. 31) Accessories Needs To Be Supplied With Machine: - ? Suitable Air Compressor Of 1 Hp Capacity. Air Compressor Should Be Oil Free And Less Noisy As Compared To The Traditional Oil-Based Compressor. ? 1 Nos Wire Mesh Type Basket For Loading & Un-Loading Of Sterilization Materials. ? Manual Sealing Machine Suitable Medical Use Sealing. Machine Should Operate On 240 V/50 Hz Operated And Make In India Product. Eto Gas Cartridge Of 1 0 0 Grams- 1 0 Nos. Eto Cartridge Should Be Of Same Make Of Machine. Bidder Must Have To Attach Msds Sheet Of Eto Gas Cartridge With Bid Document. 32) The Manufacturer Shall Have Below Listed Certification To Prove His Eligibility And Copy Of The Certificates Should Be Enclosed With The Offer. ? Iso 9001:2015 For Quality Management System. ? Ce Certificate For Eto Sterilizer & Eto Cartridge Compliance With The Requirement Of Directive Council Directive On Medical Devices 93/42/Eec As Amended 2007/47/Ec. ? Quality Management System For Medical Devices Iso 13485:2016 For Eto Sterilizer & Eto Cartridge. ? Risk Management To Medical Devices Iso 14971:2007 For Eto Sterilizer & Eto Cartridge. ? Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use - Part 2-040: Requirements For Sterilizers And Washer Disinfectors Used To Treat Medical Materials Iec 610102-040:2020 & Iec 61010-1- 040:2020. ? As Eto Gas Toxic And Carcinogenic Properties Environment Management System Certificate. ? Medical Electrical Equipment Iec– Part 1-2: Requirement For The Basic Safety And Essential Performance Of Multifunction Patient Monitoring Equipment. ? Iso 45001:2018 For Occupational Health And Safety Management System. ? Iso 20857:2010 And Rohs Directive (2011/65/Eu) On The Restriction Of Use Of Certain Hazardous Substances In Electrical And Electronic Equipment. ? Fda & Who-Gmp Certificates To Prove Standard Of Manufacturing Practice , Ot Light ( Brand - Shalya/Mattrix/Surgident) Description Of Function Led Surgical Lights Illuminate The Surgical Site For Optical Visualization Of Small Low Contrast Objects At Verifying Depths In Incisions And Body Cavities. 1. General Requirements 1.1. The Light Shall Adopt Led Technology To Create A Homogenous Light Patch Without Emitting Any Infrared Rays. 1.2. The Light System Shall Be Dual Light Heads, One Major And One Satellite. 1.3. Light Should Have Electronic Focusing From Control Panels Without Any Motorized Or Mechanical Movement Of Light Panels. 1.4. All Dome Should Have 2 Colour Led Lamps, White (Cool White) & Amber (Warm White) To Achieve High Cri And Get The Required Shade Of Light As Per Different Surgical Requirements. 1.5. High Power Leds Of 5Watts & Above Should Be Used To Provide High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area <2 Deg. 1.6. Lights Should Have Higher Watts Leds To Achieve High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area. 1.7. Pulse Width Modulation-Controlled Led Driving To Ensure Less Heating Of Led Which Increases Life Of Leds And No Change In Light Colour Output And Light Colour Temperature Throughout Life. 1.8. The Major System Shall With Automatic Illumination Control System With Sensors On The Light Head. When Some Part Of Led Is Masked By Surgeon’S Head Or Shoulders, The Remaining Led’S Will Become Brighter Automatically To Compensate For The Losing Illumination. 1.9. Light Intensity Shall Be Adjustable Between 30% -100% And Should Have Low Intensity Light For Endoscopy Mode. Light Intensity, Light Field Diameter And Color Temperature Should Be Controlled From Electronic Touch Control Panel Mounted On Light Arm And Wireless Wall Mount Electronic Touch Control Panel. It Should Also Have Provision To Control The Intensity, Electronic Focus, Depth From Sterile Field Though Capacitive Touch Control Handles. 1.10. The Light Head Shall Be Of Petalled / Winged Shape To Avoid Obstruction To Laminar Flow On Surgical Field. 1.11. The Color Temperature Shall Be Synchronized & Controlled By Either Light Head Control Panel. 1.12. The Light Shall Be Mountable To Ceiling From Single Center With 360-Degree Rotation Of All Arms. Spring Arms Shall Be Rotatable At Least 360 Degrees Around Its Own Axis. Each Dome Head Should Be Rotatable With 360 Degree At Connecting Joint With Spring Arm And At Least 300 Degrees Around Its Own Axis. This Feature Should Be Applicable With A Camera Mounted Dome Also. 1.13. The Maximum Movement Angle Of The Spring Arm Shall Be At Least Up 45°And Down 50 1.14. The Thickness Of The Light Head Shall Be No More Than 70 Mm. 1.15. Each Led Shall Be Replaceable Individually To Save Cost In Case Of Failure, Instead Of Replacing The Module With Several Leds. 1.16. The Surgical Light Should Be Complete With All Components For Celling Mount And Electrical Feed-In, Including Finalized Installation. 1.17. Detachable & Auto Cleavable Handle (3 Nos.) For Each Light Should Be Provided. 2. Technical Requirements Of Both Domes: 2.1 It Should Have 2 Colour Led Lamps, White ( Cool White) & Amber( Warm White) 2.2 The Central Illuminance Should Be 160,000 Lux 2.3 Light Field Diameter Should Be Adjustable From 150Mm To 300Mm 2.4 D10: 300Mm & D50 :160Mm 2.5 Color Temperature (K), Adjustable From 3500-5000K 2.6 Color Rendering Index Ra Should Be 95 Or More And R9 Should Be 93 Or More 2.7 Depth Of Illumination (L1+L2) As Per Iec 60601-2-41 (Ver 2003) Should Be 650Mm And As Per Iec 60601-2-41 (Ver 2008) Should Be 1200Mm. 2.8 Dimming Range Should Be Between 25-100% 2.9 Endoscopy Mode Illumination Should Be Less Than 5% Of 160,000 Lux 2.10 Number Of Led Bulbs The Light Head Should Not Be More Than 70 2.11 Led Service Life Should Be Minimum 60000Hrs 2.12 Light Head Dimension Should Be 700Mm (=/- 20Mm) 2.13 Max. Power Consumption Of All Light Sources Should Be Less Than 100W At Maximum Setting. 2.14 Power Supply Should Be 100-240V Ac, 50-60Hz 2.15 One Dome Should Be Ready For The Wireless Camera Attachment. 3.Standards • Iso 9001:2008 • Iso 13485:2003, • European Ce With 4 Digit Notified Body / Eu Ce With Eu Free Sale Certificate /Us Fda Registered . • Should Compliance With: Iec 60601-1, Iec 60601-2, Iec 60601-2-41, Certificate From Any Nabl Accredited Lab / Any Lab From Country Of Origin For Imported Brands , Suction Machine (Electrical) (Brand -Supreme / Goley) Type: Electrical Pump Type: Oil Immersed Rotary Vane Capacity: High Vacuum Voltage: 220 Vac, 50 Hz, 1 Ph Number Of Wheels: 04 (Antistatic) Air Flow: 35 Ltrs/Min Current: 1.8A Noise (Decibel): 30~35 Dba Power Consumption: 370W Weight: 25 Kgs Flow Rate: 35 Lpm Vacuum Gauge: 100Mm Reservoir Volume: 5000Ml Tubing: Non-Collapsible Suction Tubing Max Vacuum: -720Mmhg Motor:½Hp, Fhp 100% Copper Winding Rpm: 1440 Jars: Polycarbonate 2X2.5 Liters Capacity Filter: Bacterial Filter Autoclavable /Reusable Suction Machine Should Be Is I Marked , Fully Automated Biochemistry Analyser Brand (Erba Transia/ Meril) Random Access System With Stat Capability. Analytical Principle Spectrophotometry & Photometry, Turbidometry Principles. Assay Type End Point, Rate, Fixed Point, Kinetic, Ise (Optional). On Board Parameter - Present. Programmable Tests - Present. On Board Cooling For Reagent Present. Through Put - 200 Test/Hour Or More, Continuous Loading Facility. Sample Types Serum, Plasma, Urine & Other Body Fluids. Sample Volume 0-70 Micro Litres (Approx). Sample Quality Analysis, Clot Detection & Probe Crash Protection - Present. Reagent Volume 10 Microlitre To 300 Microlitre (Approx.). Total Reaction Volume 90 Microlitre To 350 Microlitre. Reaction Cuvettes - Permanent Glass Cuvettes With On Board Laundry. Possibility Of Replacement Of Individual Cuvette. Photometric Range 0-3.0 Od. 15. Wavelength-340-800 With Minimum & Standard Wavelengths (340, 405, 505, 546, 578, 600, 700 Nm) Calibration Autocalibration, Cooled Calibration Position, History Of Graphical Calibration Data Stored. Quality Control At Minimum 4 Level Qc Plot Westgard Rules, Twin Plot, Levey Jennings Graph, Cooled Qc Position. Data Storage Of Patient Present Proper System Of Storage Minimum Water Consumption. Warranty 5 Years Warranty Power Back Up Facility For Instrument. Autopipettes To Be Provided With Instrument 10 Micro Litre (Fixed) 01 Nos. 1000 Micro Litre (Fixed) 01 Nos. 0-100 Micro Litre (Variable) 01 Nos. 0-500 Micro Litre (Variable) 01 Nos. 100-1000 Micro Litre (Variable) 01 Nos. Demo Kit With Instrument Reagents Kits Provided With Instrument: Creatinine, Urea Uric Acid, Triglyceride, Sugar Cholesterol, Tp, Albumin, Sgpt, Sgot, Alkaline Phosphatase, Bilirubin Instrument: Usfda Registered And Ce Ivd Approved , Cbc Machine Brand -(Accurex / Erba/ Meril) Measurement Principle Electrical Impedance For Counting Rbc Wsc & Plateletscolorimetric Estimation Of Hgb At 540 Nm Parameterswbc, Ly#, Mid, Gr, Ly%, Mid%, Gr, Rbc, Hgb, Hct, Mcv, Mch, Mchc, Rdw-Cv, Rdw-Sd, Plt, Mpv, Pdw, Pct, P-Lcr, P-Lcc Throughput- 60 Samples/Hour Micro-Aperturewbc: 100 ?M Rbc/Plt:68 ?M Sample Typewhole Blood Or Pre-Diluted Sample Sample Volumewhole Blood (Venous Blood): 10 ?Lpre-Diluent (Capillary Blood) : 20 ?L Chamberdual Chamber: Rbc/Platelets & Wbc/Hgb Reagents- 3 Reagent System: Diluent, Detergent & Lyse (Non-Cyanide) Measurement Range Linearity Range Acceptable Limits Wbc0x10/L-10.0×109/L<= Plus/Minus 0.3 * 10 ^ 9 / L 10.1×109/L-99.9×109/L 0X102/L-1.00×102/L <= (Plus/Minus 5)%<= Plus/Minus 0.05 * 10 ^ 12 / L Rbc 1.01X102/L-9.99X102/L<= (Plus/Minus 5)% Quality Control - 4 Qc Options: L-J, X-B, X-R & X Qc Graphs Plotted With 31 Data Points Data Memory - Upto 100,000 (With Histogram) Display - 10.4 Inch Color Lcd With 640 * 480 Resolution Printer Built-In Thermal Printer Interface:Support Rs-232C, Standard Network Port And Usb; Keyboard And Mouse Operating Environment - Temperature: 15°C-35°C Electrical Specification-Fuse Specification: 250V/3A Humidity: = 85% Rh Frequency: 50/60 Hz Low: 1 X 3Ml/Normal: 1 X 3Ml/High: 1X3 Ml , Sthetoscope Brand- Bpl/Littman , Pulse Oxymeter Brand - Dr Trust /Beurer/ Bpl Specification Finger Chamber With Smart Spring System Accommodates A Wide Range Of Finger Sizes Pop-Up Menu To Setup Alarm Limits For Spo2 And Pulse Rate Low Battery Indicator Pule Rate: Yes Auto Power-Off: Yes Bright, Large Display For Better Visibility In Daylight Anti-Movement Feature Sturdy, Portable And Light-Weight Very Easy To Operate With Single Switch Operation Warranty ( Only Checking Warranty ) , Nebulizer Machine ( Brand -Bpl/Dr Trust) Operation Mode Table Top Size Compact Application Clinical Purpose, Hospital Medicine Cup Capacity 50 Ml Particle Diameter 1-5 Um , Pns ( Pereferal Nerve Stimulator For Nerver Block) Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Should Be Suitable To Identify Peripheral Nerves And Giving Percutaneous Stimulation In Neuro Muscular Block. - Should Have A Percutaneous Monopolar/Bipolar Stimulating Handle For Localization Of Nerves Without Puncturing The Nerve Which Should Be Autoclavable. - Should Have Selectable Stimulation Intensity Ranging From 0-60Ma In Steps 0.1Ma With Stimulating Handle And Stimulation Impulse Width From 0.3Ms, 0.5Ms And1.0Ms - Should Continuously Measure & Display Actual Current Passing Through The Patient And Selected Current -Should Have Pause Function To Interrupt Stimulation Without Delivering Impulses Test Function -Should Automatically Switch Off With A Acoustic Warning If Not Operated Over A Period Of 20 Mins -Should Have Lcd Display For Stimulation Current, Impulse Pattern, Pulse Width, Impulse Amplitude. - Should Have Analog And Digital Display Of Selected Current And Actual Current. - Should Have Membrane Touch Pads For Choosing Stimulation Function -Should Be Small (Pocket Size) & Light Weight. Should Be Ce Certified Or Usfda Certified , Nerve Locator With Needle Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Separate Output For Nerve Stimulator - Mapper And Locator For Safety. Automatic Switch Over From Mains Power Adaptor To Rechargeable 9Vbattery With Low Battery Warning Indicator. Feather-Touch Keypad For Easy Operation, Simple Setting And Extended Reliability. Variable Current Range As Per The Selected Mode(Impedane:0 To 5 Kohm). User Programmable Pulse Width And Frequency. Alphanumeric Lcd Display With Back Light. Automatic Shutdown For Power Saving. Audio And Back Light On-Off Option. Alarm: Audio-Visual-Alarm Is Activated If Flow Of Oxygen Falls Below 1Lpm. , Percussion Hammer Ss 304 , Tuning Fork 128 Hz Satinless Steel , Laryngoscope A Laryngoscope Is A Device Used In Medical Procedures To Visualize The Trachea By Inserting A Blade With A Small Light Into The Patients Mouth , Oxygen Concentrator Brand- Philips/Bpl/Deck&Mount 1. Flow Rate :-0-5L/Min 2. Purity 93+3% 3. Outlet Pressure(Mpa):-0.04-0.07 4. Sound Level :-<50 Dba , High Flow Nasal O2 Cannula (Brand- Drager / Niceneotech ) High-Flow Nasal Oxygen (Hfno) Therapy Delivers Heated And Humidified Oxygen At High Flow Rates (Up To 60 Liters Per Minute) Through A Nasal Cannula , Electric Needle And Syringe Destroyer Hub Cutter Stainless Steel With Auto-Cut Protection , Clinical Thermometer(Digital) , Medical Labrotary Refrigrator ( Brand- Remi / Vav Intruments) Capacity 600 Litres Temperature Range 2°C To 8°C Internal Configuration Adjustable Shelves And Storage Bins For Optimal Space Utilization Cooling Type Uniform Cooling For Consistent Temperature Distribution Display & Controls Digital Display With User-Friendly Controls Power Supply Energy-Efficient Performance , Refrigrator Domestic Single Door Godrej/ Kelvinator/ Bluestar Capacity 200 Litres To 265 Liters Temperature Range 2°C To 8°C , Wieghing Scale Mannual , Knee Hammer , Sahli,S Heamoglobinometer , Artery Forcef Staright 6 (Brand - Jj Instrument) , Double Hook Retractor Standard Size (Brand - Jj Instrument) , B.P Handleno 3 (Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 4 Mosquito(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 6 Medium(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 8 Long(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 9 Long(Brand - Jj Instrument) , Allies Forceps Big (Brand - Jj Instrument) , Allies Forceps Medium (Brand - Jj Instrument) , Allies Forceps Small (Brand - Jj Instrument) , Mayo Scissior Str 5 ½ Sttilette Edge(Brand - Jj Instrument) , Mayo Scissiorcvd 6 ¼ Sttilette Edge(Brand - Jj Instrument) , Scissors Straight 6 Medium(Brand - Jj Instrument) , Scissors Straight 5 Small(Brand - Jj Instrument) , Scissors Straight 8 Big(Brand - Jj Instrument) , Steinman Pin Introducer Ss(Brand - Jj Instrument) , Towel Clip 6 Big(Brand - Jj Instrument) , Towel Clip 4 Small(Brand - Jj Instrument) , Wire Cutter 9 Standard Size(Brand - Jj Instrument) , Detnal Wire Standard(Brand - Jj Instrument) , Langenbeck Retractor Medium(Brand - Jj Instrument) , Langenbeck Retractor Small(Brand - Jj Instrument) , Langenbeck Retractor Big(Brand - Jj Instrument) , Cats Paw Retractor Standard Size(Brand - Jj Instrument) , K-Wire Cutter With Tungsten Carbide Tip 7 Standard(Brand - Jj Instrument) , Hintermann Distractor Medium(Brand - Jj Instrument) , Mippo Wire Passer For Long Bone Large(Brand - Jj Instrument) , Wire Bender Standard Size(Brand - Jj Instrument) , Kocher Clamp 8 Standard Size(Brand - Jj Instrument) , Glucometer (Brand-Dr Trust / Dr Morphen/Accucheck/Accurex) Fast Result In 5 Seconds Small 0.5Ul Blood Sample Size Large Memory. 10 Lancets Minimum Blood Sample: 0.5 Microlitre ; It Features A Large Display Screen That Can Store Up To 300 Test Results , Vortex Mixture (Brand -Remi /Borosil/ Benchmark) Type Of Product Cyclomixer Shaking Movement Orbital Orbital Diameter (Mm) 4 Motor Type Shaded-Pole Motor , Bio Saftey Cabinet Type-Ii A Microflow (Brand - Microflow / Thermofisher) Specification Material Of Construction (Main Body) Crca/Gi Powder Coated/Stainless Steel 304 Material Of Construction (Work Table) Stainless Steel 304 Dimensions External (Wxdxh) -1950 X 900 X 2250 Mm Internal (Wxdxh) - 1830 X 610 X 610 Mm Average Air Velocity - 90 ± 20% Fpm Hepa/Ulpa - Efficiency 99.997%/99.999% Class Level - Iso 3/5 (Class 100) Noise Level - 65 ± 5 Db Electrical - 230 V, 50 Hz, Single Phase Special Features - Motor Driven Front Door, Alarm, Hepa Filter Blockage, Timer For Uv Light, Power Socket Inside The Cabinet Pressure Sensor Monitoring, Digital Airflow Verification, Interior Eye Level Display, Display Parameters Including Down Flow Air Velocity, Total Operating Hours. Standards Us Fed Std 209 E, Iso 14644-1, Iest-Rp-Cc-002-2, Bsi Certifications- Ce & Iso , Co2 Incubator (Brand - Remi / Thermofisher) Specification Chamber Volume (150 Liters) Sensor Infrared Co2 Heating Method Air-Jacketed, Pid Control Co2 Range 0~20% V/V Co2 Control Resolution ± 0.1% (Ir Sensor) Temperature Range Rt+5~55°C Temperature Stability ± 0.1°C Humidity Method Natural Vaporization > 95% Co2 Recovery (Door Open 30S, Recovery To 5%) = 3 Min Temperature Recovery (Door Open 30S, Recovery To 37°C) = 8 Min Shelves 2 3 Interior Dimension (Mm) (W X D X H) 400 X 450 X 500 480 X 530 X 610 Exterior Dimension (Mm) (W X D X H) 590 X 687 X 790 670 X 767 X 880 Supply:220-240 Volts, 50 Hz Single Phase , Binocular Microscope - Olympus( Model Ch21i) / Magnus (Model- Pzb 22) (Specification) Optical System: - High Contrast Finite Colour Corrected Optical System Magnification:- 40X To 1000X Visual Magnification. Stand: Aluminium Die-Cast Stand With Hand Rests For Enhanced Comfort And Stability. Observation Head: - Sidentopf Binocular/Trinocular Head, 360° Rotatable, Interpupillary Distance 53-75Mm, With Dual Diopteric Adjustment. Eye-Piece: - Wide Field 10X F.O.V 22Mm, Anti-Fungal & Anti- Reflection Hard Coated (Optional 10X/18Mm). Nosepiece: - Reverse Angle Quadruple Nosepiece (Ball Bearing Type) With Precise Click Stops. Objective: - Qusp Series High-Contrast Flat Shield Plan Din Achromatic Objective 4X, 10X, 40X (S) And 100X Oil, (S), Anti-Fungal & Anti-Reflection Hard Coated. Mechanical Stage: - Rack-Less X Axis Double Plate Stage, Size 190 X 125Mm (+-5Mm) With Cross Travel 90 (X) X 50Mm (Y) On Ball Bearing With Co-Axial Controls. Hard Coated Surface For Scratch Resistance. Double Specimen Holder Clip. Focusing Control: - Co-Axial Coarse And Fine Focusing On Gear Systems For Smooth Operation. Fine Adjustment 0.2Mm/Rotation With Maximum 2-Micron Scale Increment. Condenser: - Sub-Stage Moveable Abbe Condenser, Centerable, Na 1.25 With Aspheric Lens. Iris Diaphragm And Special Frosted White Filter, Swing-In, And Swing-Out Filter Holder. Light Source: Led 3.5W 3V Illumination With Variable Illumination Control Universal Power Supply 110V-240V, Ce Approved. Supply With: Power Cable, Immersion Oil, Spare Bulb (In Led Only) User Manual, Vinyl Dust Cover, Cleaning Cloth, And 01 Units Fuses Optional Accessories: - Wooden Carrying Case, Pointers & Micrometre Reticules , Penta Head Microscope(Brand- Micron/Magnus/Weswox) Optical System- Infinite Optical System Viewing Head Inclination 30 Degree, Ipd: 48-75. 01 Piece Trinocular Head, Inclined At 30°, 360° Rotatable, Phototube With 100:0/50:50 Light Split With Sliding Prism. 04 Piece Compensation Free Binocular Head, Inclined At 30°, 360° Rotatable With Diopter Adjustment. Eyepiece-10 Pairs Of Wide Field Eyepiece Wf10x/22Mm Nosepiece- Inverse Quintuple Nosepiece. Objective Plan Achromatic Objective 4X Plan Achromatic Objective 10X Plan Achromatic Objective 20X Plan Achromatic Objective 40X Plan Achromatic Objective 100X Condenser - Swing Out Condenser N.A.0.9/1.25 Focusing-Coaxial Coarse And Fine Adjusting System With Tightness Adjustment And Upper Limited, Coarse Adjustment Range 30Mm. Fine Adjustment Precision: 0.002Mm Attachment- Multi Head Attachment And Support Stand. Stage- Ceramic Coated Double Layers Mechanical Stage Of 185X142 Mm With Capacity To Hold Two Slides At A Time With Slide Catcher On Left And Motion Control On Right Hand Side Illumination- External Illumination, Led 12V 100W Pointer - Multi Colored Ponters With Intensity Controllable Led Colored Indicator (Blue, Green And Red Led) Pointer 360 Rotatable, Brightness Adjustable, Arrow Control Sticks And Color Selection Dial. Video Adapter C Mount 0.5X Camera - 8Mp Hd Camera 4K Resolution With Removable Hd Card With Sd Card And Compatible Software. Display-43 Inch Hd Display Connected To Penta Head Camera For Live Display With Suitable Stabilizer For Display. Certifications - Ce(Notified), Ios 9001 (Iaf Accredited), Ios 13485 Warranty: 1 Year , All In One Pc ( Brand- Hp/Dell/Lenovo) All-In-One Pc 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, 710 White Wireless Keyboard And Mouse Combo (Windows 11 Home, Mso 21, Shell White, 6.72 Kg) 27-Cr0407in , Desktop ( Brand- Hp/Dell/Lenovo) 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, Wired Keyboard And Mouse Combo (Windows 11 Home, Mso 21) 27-Cr0407in , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 1.5 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 2 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Lithium Battery 1500Wh Battery 48W 120Ah ( Brand- Luminous /Amaron) , Executive Premium Office Chair, Leather “Adjustable Arms Ergonomic Chair Must Behigh Back ( Brand- Godrej) , Office Table4x3 Feet( Brand- Godrej) , Mid Back Office Chiar ( Brand- Godrej) , Revolving Stool ( Brand - Aliza /Godrej) 3 Leg Ss Top Powder Coated Thicknessminimum- 14 Gauge , Steel Almirah W X H X D: 91.44 Mm X 197.866 Mm X 485.140 Feet For Office Use(Brand- Godrej) , Xerox Machine (Hp/Canon/Ricoh) Print Duplex, Copy, Scan, A3 Black And White Laserjet Printer, Enterprise Departments/ Distributed Workforce, Laser Printers Print Speed Is Up To 22 Pages Per Minute (Ppm) For Black And White Printing , Imcubator Electrical 23 Lts Thermostat , Centrifuge Machine Clinical ( Brand - Remi /Benchtop) , Salters Baby Wieghing Machine , Oto Scope , Chloroscope , Horrock,S Appratus Portable , Sound Level Meter Decible Meter With Lcd Display , Water Depth Sampler , Vaccine Carrier , Mosquito Catching Kit , Craft Water Testing Kit
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 8
Jharkhand View Result →
14.
Public Administrative Department #10379186 Price Bid
Supply, Installation, Testing, Commissioning And Maintenance For Cctv Camera Surveillance System And Integrated Command Control ( Iccc ) Surveillance System For Palghar Muncipal Conucil Area 58 Cameras And 3 Year Amc ( Semi-Comprehensive Service And M , Supply, Installation, Testing, Commissioning And Maintenance For Cctv Camera Surveillance System Andintegrated Command Control ( Iccc ) Surveillance System For Palghar Muncipal Conucil Area 58 Cameras And 3 Year Amc ( Semi-Comprehensive Service And Maintenance Contract 3 Years ) . Palghar. , Supply, Installation, Testing & Commisioning Of 5Mp Bullet Camera Image Sensor 1 / 2.9 Progressive Scan Cmos Min. Illumination Color: 0.01 Lux @ ( F1.2, Agc On ) , 0.028 Lux @ ( F2.0, Agc On ) , 0 Lux With Ir Shutter Speed 1 / 3 S To 1 / 100, 000 S Slow Shutter Yes Day & Night Ir Cut Filter Digital Noise Reduction 3D Dnr Wdr 120Db 3-Axis Adjustment Pan: 0° To 360°, Tilt: 0° To 100°, Rotate: 0° To 360° Focal Length 2.8 / 4 / 6 / 8 Mm Aperture F2.0 Focus Fixed Fov 2.8 Mm, Horizontal Fov: 97°, Vertical Fov: 63°, Diagonal Fov: 120° 4 Mm, Horizontal Fov: 78°, Vertical Fov: 50°, Diagonal Fov: 97° 6 Mm, Horizontal Fov: 60°, Vertical Fov: 39°, Diag Onal Fov: 75° 8 Mm, Horizo Ntal Fov: 39.5°, Vertical Fov: 26°, Diagon Al Fov: 48° Lens Mount M12 Ir Range Min 50 M Wavelength 850Nm Video Compression Main Stream: H.265 / H.264 Sub-Stream: H.265 / H. 264 / Mjpeg Third Stream: H.265 / H.264 H.264 Type Main Profile / High Profile H.264+ Main Stream Supports H.265 Type Main Profile H.265+ Main Stream Supports Video Bit Rate 32 Kbps To 16 Mbps. Smart Event Line Crossing Detection, Intrusion Detection, Face Detection Basic Event Motion Detection, Video Tampering Alarm, Exception ( Network Disconnected, Ip Address Conflict, Illegal Login, Hdd Full, Hdd Error ) Linkage Method Trigger Recording: Memory Card, Network Storage, Pre-Record And Post-Record Trigger Captured Pictures Uploading: Ftp, Http, Nas, Email Trigger Notification: Http, Isapi, Email Region Of Interest Support 1 Fixed Region For Main Stream And Sub-Stream Max. Resolution, 25 Fps In All Resolution 30Fps ( 2560 × 1440, 1920 × 1080, 1280 ×720 ) Sub-Stream 50Hz: 25Fps ( 640 × 480, 640 × 360, 320 × 240 ) 60Hz: 30Fps ( 640 × 480, 640 × 360, 320 × 240 ) Third Stream 50Hz: 25Fps ( 1280 × 720, 640 × 360, 352 × 288 ) 60Hz: 30Fps ( 1280 × 720, 640 × 360, 352 × 240 ) Image Enhancement Blc / 3D Dnr / Hlc Image Setting Rotate Mode, Saturation, Brightness, Contrast, Sharpness, Agc, And White Balance Are Adjustable Byclient Software Or Web Browser Target Cropping No Day / Night Switch Day / Night / Auto / Schedule Network Storage Support Micro Sd / Sdhc / Sdxc Card ( 128G ) , Local Storage And Nas ( Nfs, Smb / Cifs ) , Anr Protocols Tcp / Ip, Udp, Icmp, Http, Https, Ftp, Dhcp, Dns, Ddns, Rtp, Rtsp, Rtcp, Pppoe, Ntp, Upnp, Smtp, Snmp, Igmp, 802.1X, Qos, Ipv6, Udp, Ssl / Tls General Function Anti-Flicker, Three Streams, Heartbeat, Mirror, Privacy Masks, Password Reset Via E-Mail, Pixel Counter, Http Listening Security Password Protection, Complicated Password, Https Encryption, 802.1X Authentication ( Eap-Tls 1.2, Eap-Leap, Eap-Md5 ) , Watermark, Ip Address Filter, Basic And Digest Authentication For Http / Https, Wsse And Digest Authentication For Onvif, Tls1.2Api Onvif ( Profile S, Profile G, Profile T ) , Isapi, Sdk Simultaneous Live View Up To 6 Channels User / Host Up To 32 Users 3 Levels: Video Output No Communication Interface 1 Rj45 10M / 100M Self-Adaptive Ethernet Port On-Board Storage Built-In Microsd / Sdhc / Sdxc Slot, Up To 128 Gb Svc H.264 And H.265 Encoding Support Reset Button Yes Operating Conditions -30 °C To +60 °C ( -22 °F To +140 °F ) , Humidity 95% Or Less ( Non-Condensing ) Power Supply 12 Vdc ± 25%, F 5.5Mm Coaxial Power Plug Poe ( 802.3Af, Class 3 ) Power Consumption And Current :12 Vdc, 0.6 A, Max. 7 W Poe: ( 802.3Af, 36 V To 57 V ) , 0.3 A To 0.2 A, Max. 8.5 W Max. 12 W Protection Level Ip67. Warranty Of 1 Year. , Supply, Installation, Testing & Commisioning.Of 5Mp Bullet Camera. Image Sensor-1 / 2.7 Cmos, Max. Resolution-2592 ( H ) × 1944 ( V ) , Rom-128 Mb, Ram-512 Mb, Scanning System Progressive Electronic Shutter Speed Auto / Manual 1 / 3 S–1 / 100, 000 S Min. Illumination 0.005 [email protected] ( Color, 30 Ire ) 0.0005 [email protected] ( B / W, 30 Ire ) 0 Lux ( Illuminator On ) S / N Ratio>56 Db Illumination Distance-60 M ( 196.85 Ft ) ( Ir Led ) Illuminator On / Off Control Auto;Manual Illuminator Number 4 ( Ir Led ) , Pan / Tilt / Rotation Range Pan: 0°–360° Tilt: 0°–75° Rotation: 0°–360° Lens Type Motorized Vari-Focal Lens Mount F14 Focal Length-2.7 Mm–13.5 Mm, Max. Aperture-F1.5 Field Of View H: 100°–30° V: 72° –23° D: 134° –38° Iris Control-Fixed Close Focus Dista Nce-0.8 M ( 2.62 Ft ) Dori Distance Lens Detect Observe Recognize Identify W 64.4 M ( 211.29 Ft ) 25.8 M ( 84.65 Ft ) 12.9 M ( 42.32 Ft ) 6.4 M ( 21.00 Ft ) T221.4 M ( 726.37 Ft ) 88.6 M ( 290.68 Ft ) 44.3 M ( 145.34 Ft ) 22.1 M ( 72.51 Ft ) Ivs ( Perimeter Protection ) Tripwire; Intrusion ( The Two Functions Support The Classification And Accurate Detection Of Vehicle And Human ) Smart Search-Work Together With Smart Nvr To Perform Refine Intelligent Search, Event Extraction And Merging To Event Videos.Video Compression 25 Fps In All Resolution Bit Rate Control Cbr / Vbr Video Bit Rate H.264: 3 Kbps–8192 Kbps H.265: 3Kbps–8192 Kbps Day / Night Auto ( Icr ) / Color / B / W Blc Yes Hlc Yes Wdr 120 Db Scene Self-Adaptation ( Ssa ) Yes White Balance Auto; Natural; Street L Outdoor; Manual; Regional Custom Gain Control Auto;Manual Noise Reduction 3D Dnr Motion Detection Off / On ( 4 Areas, Rectangular ) Region Of Interest ( Roi ) Yes ( 4 Areas ) Smart Illumination Yes Image Rotation 0° / 90° / 180° / 270° ( Support 90° / 270° With 1080P Resolution And Lower ) Mirror Yes Privacy Masking 4 Areas. Audio Compression G.711A; G.711Mu; Pcm; G.726 ( Only - Zas Supports ) . Alarm Event -Zas:No Sd Card; Sd Card Full; Sd Card Error; Network Disconnection; Ip Conflict; Illegal Access; Motion Detection; Video Tampering; Intrusion; Tripwire; Scene Changing; Audio Detection; Voltage Detection; Defocus Detection; External Alarm; Smd; Safety Exception-Zs:No Sd Card; Sd Card Full; Sd Card Error; Network Disconnection; Ip Conflict; Illegal Access; Motion Detection; Video Tampering; Intrusion; Tripwire; Scene Changing; Voltage Detection; Defocus Detection; Smd; Safety Exception. Network Port Rj-45 ( 10 / 100 Base-T ) Sdk And Api Yes Cyber Security Video Encryption; Firmware Encryption; Configuration Encry Ption; Digest; Wsse; Account Lockout; Security Logs; Ip / Mac Filtering; Generation And Importing Of X.509 Certific Ation; Syslog; Https; 802.1X; Trusted Boot; Trusted Exec Ution; Trusted Upgrade Network Protocol Ipv4; Ipv6; Http; Tcp; Udp; Arp; Rtp; Rtsp; Rtcp; Rtmp; Smtp; Ftp; Sftp; Dhcp; Dns; Ddns; Qos; Upnp; Ntp; Multicast; Icmp; Igmp; Nfs; Samba; Pppoe; Snmp Interoperability Onvif ( Profile S / Profile G / Profile T ) ; Cgi; P2p; Milestone; Genetec User / Host 20 ( Total Bandwidth: 64 M ) Storage Ftp; Sftp; Micro Sd Card ( Support Max. 256 Gb ) ; Nas Browser Ie Chrome, Firefox Management Software Smart Pss; Dss; Dmss Mobile Client-Ios; Android.Audio Input 1 Channel ( Rca Port ) ( Only - Zas Supports ) Audio Output 1 Channel ( Rca Port ) ( Only - Zas Supports ) Alarm Input 1 Channel In: 5 Ma 3–5 Vdc ( Only - Zas Supports ) Alarm Output 1 Channel Out: 300 Ma 12 Vdc ( Only - Zas Supports ) Power Supply 12 Vdc / Poe ( 802.3Af ) Power Consumption Basic: 3.3 W ( 12 Vdc ) ; 4.2 W ( Poe ) Max ( Wdr + Ir Intensity + Intelligence On ) : 7.8 W ( 12 Vdc ) ; 9.7 W ( Poe ) Environment Operating Temperature –30 °C To +60 °C ( –22 °F To +140 °F ) Operating Humidity =95% Storage Temperature–40 °C To +60 °C ( –40 °F To +140 °F ) Protection Ip67.Warranty Of 1 Year. , Supply & Installation Of Camera Housing For Outdoor Suitable For High Temperature Environment, Working Temperature- 20? ~ +60?, Humidity 95% Or Less ( Non-Condensing ) , Main: Aluminum Alloy Window: Glass, Dimension ( Mm ) -455.3×169.2×110, Protection Level-Ip67. , Supply & Installation Of Camera Bracket Mount With Bracket Type: Pan Tilt Brackets, Dimensions Mm: 190 X 200 X 500 Mm, Max Load Kg-50, Housing Material-Steel. , Supply, Installation, Testing & Commisioning. 4 X 100M Poe Ports, 1 X 1000M Rj45 Port, And 1 X 1000M Sfp Fiber Optical Port. Supports Ieee 802.3At / Af. Supports Ieee 802.3, Ieee 802.3U And Ieee 802.3X.Supports High Priority Ports. Supports 8-Core Power Supply. Up To 250 M Transmission Distance. Poe Port With 6 Kv Surge Protection.Supports Poe Output Power Management. 1000M Network Access.Wire-Speed Forwarding And Non-Blocking Design.Store-And-Forward Switching.Solid High-Strength Metal Shell.Power Supply Specification 100~240 Vac, 50 / 60 Hz, Max. 2.5 A. Warranty Of 1 Year. , Supplying And Laying Of Cat-6 Cable With Rodent Proof And Anti Termite Jacket Suitable For Networking As Per Specification No. Wg-Coc / Nc , Supplying And Laying Of Cat-6 Armoured Cable With Eccs Tape Suitable For Networking As Per Specification No. Wg-Coc / Nc , Supply, Installation, Testing & Commisioning. 128G 128Gb Microsd Cards For Surveillance 128 Gb Maximum Read Speed: 96 Mb / S Maximum Read Speed: 96 Mb / S Compatible With Microsdhc, Microsdxc, Microsdhc Uhs-I, And Microsdxc Uhs-I Host Devices. Warranty Of 1 Year. , Supply, Installation & Testing Of 6 U Outdoor Rack Item Type Technical Parameter Layout & Mounting One Compartment, Pole & Wall Mountable Equipment Installation Method 19” Standard Rack Door With One Front Door With Lock ( Support Padlock ) Material 1.Galvanized Steel;2.Single Wall, Thickness Of : 1.2Mm, Thickness Of Mounting Angles:1.5Mm Structure Assembled, Welded Constructions, Ingress Protection Ip65 Temperature Control Cooling Ac220v 90 Cfm Dual Fan.Lighting Led Lamp Ac230 V Or Dc 48V Led Lamp- Optional Temperature Temperature Working Temperature: -40°C ~ +55°C Storage Temperature: -50°C ~ + 70°C Transport Temperature: -50°C ~ +70°C Humidity Relative Humidity 5% ~ 100% Pressure Air Pressure 62Kpa ~ 101Kpa ( Similar To 0M ~ 5000M Altitude ) Radiation Intensity Solar Radiation Intensity 1124 × ( 1±5% ) W / M2 ) Warranty For 1 Year. , Supply, Installation, Testing & Commisioning. Media Converter, Auto-Negotiation Of Half-Duplex / Full-Duplex Transfer Mode Extends Fiber Distance Up To 15Km.1× 1000M Sc / Upc Port 1× 10 / 100 / 1000M Rj45 Port ( Auto Mdi / Mdix ) . Single-Mode Fiber, Utp Category 5, 5E Cable ( Maximum 100M ) Eia / Tia-568 100O Stp ( Maximum 100M ) .Operating Temperature: 0?~50? ( 32?~122? ) . Warranty Of 1 Year. , Supplying And Erecting Lszh Armoured Multimode Optical Fibre Cable With 12 Fibres, Core Dia 50 / 125 ?M ( Om3 ) , Suitable Up To 10 Gbps Ethernet Distance At 850 Nm Of Wavelength, On Wall / Ceiling Or Laid In Provided Pipe / Trench As Per Specification No. Wg-Coc / Ofc , Providing & Erecting 5 M High ( Clear Height ) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 130 Mm A / F, Top 70 Mm A / F On Provided Foundation As Per Specification No. Oh-Pl / Opl. , Making M- 20 Grade Reinforced Cement Concrete Foundation By Considering The Safe Soil Bearing Capacity As 10 T / Sq.M At 1.5 M Depth Including Supply Of Steel, Concrete, Excavation, Fixing Provided Nut Bolts With The Help Of Template, Duly Plastered As Per Design Complete ( For 3 To 5M Octagonal / Conical Gi Pole ) . , Supply, Lnstallation, Testing & Commissioning Of Nvr Viewer Workstation ( Hp / Dell / Lenovo ) With Duel Monitor Support , With Nvr Viewer Software And License Operating System 12Th Gen Lntel Corerm I5- Processor Windows 10 Pro ( Windows 1 1 Pro License Included ) , English8 Gb, Ddr5, 256 Gb, M.22230, Pcle Nvme, Ssd, Class 35 Power Button; Hard Disk Drive Activity Light ;. Line Ln / Out 4. Universal Audio Jack S.Usb 3.2 Gen 2Type A With Power Share 6. Usb 3.2 Gen2x2 Type C ( 20Gb Data ) Back ( 35W ) : Knock-Out Slot For External Wireless Antenna ( Optional ) ; Optional Video Port ( Hdmi 2.0B1 Displayport 1.4A1 Vga / Usb Type-C With Displayport Alt Mode ) ; Usb 3.2 Type A Ports ( 2 - One With Power On ) ; Padlock Ring And Kensington Security Cable Slot ; Ethernet Rj-45 12. Usb 3.2 Gen 2 Type A Ports ( 2 ) ; Display Ports 1.A ( 1 ; Power Adapter Portback ( 65W ) : ; Knock-Out Slot For Wireless Antenna ; Optional Video Port ( Hdmi 2.0Bl Displayport 1.4A1 Vga / Usb Type-C With Displayport Alt Mode ) ; Usb 3.2 Gen 1 Type A With Smart Power On; Padlock Ring And Kensington Security-Cable Slot ; Ethernet Rj-45; Usb 3.2 Gen 2 Type A Ports ( Z ) ; Displayport 1.4 Ports ( 3 ) ; Power Adapter Port.Warranty Of 1 Year. , Supplying, Erecting, Testing And Commissioning Of 3Kva Capacity Online Pure Sine Wave With Backup Time Of ....... Hrs. Pwm & Igbt Based Ups With 0.8 To Unity Output Pf, Single Phase Input & 1 Phase Output Complete With All Protections As Per Specification No. Ap-Ups. Warranty Of 1 Year. , Supplying And Erecting 12 V / 65Ah Smf Battery With Battery Terminal Wire, Duly Charged Complete With 24 Months Warranty Complete. Warranty Of 1 Year. , Supply, Installation Testing And Commissioning Of Router - Cable Or Dsl Modem With Ethernet Port, 4 10 / 100 Lan Ports, 1 10 / 100 Wan Port, 2.4 Ghz To 2.497 Ghz, Wep 64 / 128-Bit Data Encryption, Wi-Fi Protected Access ( Wpa / Wpa2 ) , Wps, Network Address Translation ( Nat ) , Stateful Packet Inspection ( Spi ) , Mac Address Filtering, Url Filtering, Power, Internet Status, Wlan , Lan.Warranty Of 1 Year. , Supply, Installation, Testing & Commisioning. Uhd 4K Led Display 86 Interactive Panel With Resolution Of 3840 × 2160 ? Anti-Glare And Anti-Blocking Design To Ensure Smooth Interaction? Dual Systems Of Windows And Android Saving Cost And Easy To Use? Quick Response, At Most 20-Point Touch Control And Smooth Writing Experience? Dual Usb 3.0 Interfaces, And Data From Any Interface Can Be Read In Windows And Android System At The Same Time? Enable The Floating Ball By Gesture To Realize Writing, Erasing, Screenshoting And Freezing In Any Channel? Mirroring By Mobile Phone Or Tablet To Realize Remote Control And Flexible Teaching? Teaching Software Integrating Kinds Of Tools And Materials, Convenient Writing, Erasing, Recording, Preparing And Teaching ? Scan The Qr Code To Save The Teaching Notes ? All-In-One Design With Tempered Glass And Intelligent Temperature Control, Making It Environmental-Friendly And Safety-Guaranteed.Warranty Of 1 Year. , Supply Installation & Testing Ofvms, An Integrated Security Software, Is Designed To Meet Versatile Security Challenges In One Intuitive Platform: From Managing Individual Systems Such As Video Security, Access Control, Intrusion Alarm, Etc., To Collaborating Multiple Systems Under A Unified Architecture. While Protecting People And Property, It Makes Daily Operations More Efficient, And Helps Various Kinds Of Users Make Smarter Decisions. , Supply, Installation And Testing Of 10 Tb Surveillance Storage Hard Disk Drive -24R Surveillance Hdo Capacity - 8 Tb Interface Sata Iii 6 Gb / S Max Sustained Transfer Rate Od-210 Mbs Cache - 256 Mb Tamish Resistant Load / Unloadcycles-300 000 Power On Hours / Year 8760 Mean Tim Between Failures ( Mtbf ) - 1 Million Hours Operating Temperature - Ambient : 41 F / 5 C ( Min ) Drive Case : 158 F / 70 C ( Max ) Non Operating Temperature Ambient : 40 F / 10C ( Min ) . Warranty Of 1 Year. , Supply, Installation Testing And Commissioning Of 21 U Rack Rack Standard : Conforms To Din 41494 Or Equivalent Standardconstruction : Welded Or Ckd ( Knockdown ) Front Door : Lockable Double Toughened Glass Door Or Perforated Basic Frame : Steel Equipment Mounting : Din Standard 10Mm Sq. Slots / Direct M6 Tapmounting Angle : 19” Mounting Angles Made Of Formed Steelstandard Finish : Powder Coatedtop And Bottom Cover : Welded To Frame, Vented And Cable Entry / Exit Cut Outs From Top & Bottom Standard Mounting Option : Castor Wheels ( Front 2 Wheels With Break And Rear Without Break ) Or Levelers Standard Color : Grey Or Black Static Load : 500Kgs. Warranty Of 1 Year. , Supply, Installation Testing And Commissioning Of 8 Port Poe Later 2 Indoor Network Switches With 2 Sfp Port And Modules Complete As Required. 3 Years Defect Liability Period, All Necessary Maintenance, Transportation, Rack And Taxes.Warranty Of 1 Year. , Supply, Installation Testing And Commissioning Of Nvr For Video And Audio Ip Video Input 64-Ch Up To 12 Mp Resolution*: 32 Mp And 24 Mp Is Only Available For Channel 1 When Ultra Hd Resolution Mode Is Enabled. Incoming Bandwidth 320 Mbps Outgoing Bandwidth 256 Mbps Incoming Bandwidth ( Raid Mode ) 200 Mbps Outgoing Bandwidth ( Raid Mode ) 200 Mbps Hdmi 1 Output 4K ( 3840 × 2160 ) / 60Hz, 4K ( 3840 × 2160 ) / 30Hz, 1920 × 1080 / 60Hz, 1600 × 1200 / 60Hz, 1280 × 1024 / 60Hz, 1280 × 720 / 60Hz, 1024 × 768 / 60Hz Hdmi 2 Output 1920 × 1080 / 60Hz, 1280 × 1024 / 60Hz, 1280 × 720 / 60Hz, 1024 × 768 / 60Hzvga 1 Output 1920 × 1080 / 60Hz, 1280 × 1024 / 60Hz, 1280 × 720 / 60Hz, 1024 × 768 / 60Hz Vga 2 Output1920 × 1080 / 60Hz, 1280 × 1024 / 60Hz, 1280 × 720 / 60Hz, 1024 × 768 / 60Hz Video Output Mode Hdmi 1 And Vga 1 Provide Simultaneous Video Output, And Work As The Main Output;Hdmi 2 And Vga 2 Provide Simulta Neous Video Output, And Work As The Auxiliary Output Cvbs Output 1-Ch, Bnc ( 1.0 Vp-P, 75 O ) , Resolution: Pal: 704 × 576, Ntsc: 704 × 480 Audio Output2-Ch, Rca ( Linear, 1 K? ) Two-Way Audio1-Ch, Rca ( 2.0 Vp-P, 1 K?, Using The Audio Input ) Decoding Decoding Format H.265+ / H.265 / H.264+ / H.264 / Mpeg4 Recording Resolution 32 Mp / 24 Mp / 12 Mp / 8 Mp / 6 Mp / 5 Mp / 4 Mp / 3 P / 1080P / Uxga / 720P / Vga / 4Cif / Dcif / 2Cif / Cif / Qcif *: 32 Mp And 24 Mp Is Only Available For Channel 1 When Ultra Hd Resolution Mode Is Enabled. Synchronous Playback 16-Ch Decoding Capability 1-Ch@32 Mp ( 30 Fps ) / 2-Ch@12 Mp ( 20Fps ) / 4-Ch@8 Mp ( 25Fps ) / 8-Ch@4 Mp ( 30Fps ) / 16-Ch@1080P ( 30Fps ) Dual-Stream Recording Support Stream Type Video, Video & Audio Audio Compression. 711Ulaw / G.711Alaw / G.722 / G. 726 / Aac / Mp2l2 / Pcm Network Remote Connection 128 Network Protocoltcp / Ip, Dhcp, Ipv4, Ipv6, Dns, Ddns, Ntp, Rtsp, Sadp, Smtp, Snmp, Nfs, Iscsi, Isup, Upnp™, Http, Https Network Interface 2, Rj-45 10 / 100 / 1000 Mbps Self-Adaptive Ethernet Interface Raid Raid Type Raid0, Raid1, Raid5, Raid6, And Raid10 ( At Least 4 Tb For Each Hdd ) Auxiliary Interface Serial Interface 1 Rs-485 ( Full-Duplex ) , 1 Rs-232, 1 Keyboard, 10 Sata Interfaces Supporting Hot-Plug Esata 1 Esata Interface Capacity-Up To 10Tb Capacity For Each Disk. Alarm In / Out-16 / 4. Usb Interface Front Panel: 2 × Usb 2.0; Rear Panel: 1 × Usb 3.0 Power Supply-100 To 240 Vac, 50 To 60 Hz Consumption-30 W Working Temperature-10 °C To 55 °C ( 14 °F To 131 °F ) Working Humidity 10% To 90% Chassis 3U Weight-10 Kg ( 22 Lb ) .Warranty Of 1 Year. , Supplying, Installing And Testing Utp Connector ( Rj-45 ) As Per Specification No.Wg-Nas / Utpc. , Amc ( Semi-Comprehensive ) Forcamera Complete Solution From On Field Equipments To Command Control Setup For 2Nd Year Where Upto Rs.1000 Will Be Waived Off Or Bare By Agency.From Agency Twice Inspection Will Be Done In A Month And Camera Position And Working Status Of Camera Will Be Updated. ( Parts Includes In Semi Comprehensive Amc Are Camera, Poe Switch, Tv, Work Station, Memory Card, Nvr, Inverter & Batteries ) . , Amc ( Semi-Comprehensive ) Forcamera Complete Solution From On Field Equipments To Command Control Setup For 3Rd Year Where Upto Rs.1000 Will Be Waived Off Or Bare By Agency.From Agency Twice Inspection Will Be Done In A Month And Camera Positionand Working Status Of Camera Will Be Updated. ( Parts Includes In Semi Comprehensive Amc Are Camera, Poe Switch, Tv, Work Station, Memory Card, Nvr, Inverter & Batteries ) . , Amc ( Semi-Comprehensive ) Forcamera Complete Solution From On Field Equipments To Command Control Setup For 4Th Year Where Upto Rs.1000 Will Be Waived Off Or Bare By Agency. From Agency Twice Inspection Will Be Done In A Month And Camera Position And Working Status Of Camera Will Be Updated. ( Parts Includes In Semi Comprehensive Amc Are Camera, Poe Switch, Tv, Work Station, Memory Card, Nvr, Inverter & Batteries ) . , Add 4% Contigency Rs.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 5
Maharashtra View Result →
15.
Housing Urban and Rular Development #10191469 AOC
Furnishing Work Of Classrooms, Library And Laboratory, Equipments And Miscellaneous Work For The New University Campus Of Binod Bihari Mahato Koyalanchal University, Dhanbad- 1 Supplying Metal Exhaust Fan 300 mm Sweep-Supplying, erecting and testing of approved make 300 mm sweep Exhaust Fan heavy duty with mounting frame, blades AC 230-250 complete connection and including frame bolt/ Anchor hole fastners etc, complete finished of a as required. 2 Wall Demolition- Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 3 Taking down chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 4 Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 5 Taking sown chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 6 Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. 7 Door Frame- Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Profile C - Fixing with adjustable lugs with split end tail to each jamb 8 Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. 9 Extra for providing and placing in position 2 Nos 6mm dia. M.S. barsat every third course of half brick masonry. 10 Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. 11 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 12 Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. 13 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.-Granite stone slab colour black, Cherry/Ruby red-Area of slab over 0.50 sqm 14 Sink- Supplying fitting and fixing white glazed fires clay sink of approved make with overflow arrangements supported on C.I. Or R.S. Painted bracket 40mm. Dia C.P. Brass waste with C.P. Brass chain and rubber plug 40mm dia P.V.C. Waste pipe about 750mm long with brass coupling at one endand 15mm C.I. body brass spindle bib cock of approved quality of weight not less than 450grams including cutting wall and making good the same etc. all complete as per specification and direction of E/I. Size-600 mm x 450 mm x 250 mm ) 15 FULL HEIGHT WOODEN PARTITION WITH PARTLY GLAZING- Providing and fixing partitions made of 50 mm x 50 mm pine wood / 2nd class teak wood @ 600 mm c/c both ways with the help of Fasteners/Screws etc. to achieve desired strength. Providing & fixing Comm. grade 12 mm thick commercial Pty board on the frame on both the faces i/c exposed side edges of Frame & 1.0mm thk Laminate on both outer faces and exposed side edges of ply as per the directions. Partition shall also be provided with 8 mm thick clear float glass of approved size with Polished Edges of approved brands in Wooden Partition Openings as required, fixed from all four sides from both ways inside partition openings with 10mm.tk. T.W. beadings/12 mm thick MDF Board Lipping/D-Buttons of design as per approval and direction at site. Etching / Etching Film (50 Microns) is to be provided as per approved pattern on 8 mm thick clear float glass. All wooden exposed surfaces shall be melamine polished in approved shade and texture finished as per the directions and satisfaction of Engineer In charge, compelete.This work will 16 Frosted glass sheet of nominal thickness 4 mm- Providing and pasting frosted film on glass work including all materials tools, plants and labour complete as per the directions of the Engineer-in-charge. 17 Supply & laying of PVC insulated and sheathed 1.1 kv grade twin twisted 1.5 sqmm cu flexible wire for speaker. 18 Providing & installation 1.5 Tr. 5 Star split A.C (Inverter Type) I91391-part-1 19 Copper refregerant pipe-Providing & installation Copper Tube of size 5/8 for split ac unit 1/1.5/2/3 tr capacity including nitride rubber insulation 20 Providing & installation 5 KVA wall mounted automatic voltage stablizer from range 140 V to 280V 21 Providing & installation Drain Pipe for AC 22 Non Schedule 23 * PROVIDING AND SUPPLYING MODERN DESIGN RECEPTION DESK IN ENGINEERED WOOD MAKE THE PRODUCTS UTILE AND A DELIGHT.TIMELESS DESIGN THAT ELEVATES YOUR OFFICE SPACE STRUCTURE OF SPACIOUS RECEPTION DESK,TABLETOP OFFERS YOU A GENEROUS LOOK FOR WORK SURFACE USE PREMIUM QUALITY MATERIALS OVER ALL SIZE IS 1800 MM(L)X 600 MM(D)X 750 MM(H) WHICH GIVE MORE SURFACE AREA FOR WORK ,TABLE TOP MADE OF25MM THICK ALSO TABLE TOP BASED ON SIDE PANELS MADE 18MM THICK PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST. * COMBINATION CONSTRUCTION OF RECEPTION DESK ABOVE TABLE TOP 18 MM THICK COUNTER TOP TO TABLE TOP HEIGHT IS @ 300MM ,OVERALL RECEPTION DESK HEIGHT IS @ 1050MM WITH COUNTER TOP,TABLE TOP MADE 25 MM THICK PRELAM PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK PVC EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXED WITH HOT MELT GLUE.ALONG WITH 18MM THK ADDITIONAL MODESTY PANEL SIZE IS 1350 MM (L) X 700 MM (H) MADE BY EXCLUSIVE FROSTY WHITE COLOUR WITH EPIC DESIGN & LOOK.1 MOBILEPEDESTAL (2 DRAWERS + 1 FILING CABINET )SIZE IS 450 MM(L)X 450 MM(D)X 725 MM(H) IN PROVIDED WITH CENTRAL LOCKS FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING & PEDESTALS MOVE ON NYLON CASTORS. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST 24 PROVIDING AND SUPPLYING * MEDIUM BACK 360° DEGRE REVOLVING CHAIR * ALL OVER SIZE IS : 580MM(L)X 670MM(D)X1110MM(H) ,*THE CHAIR MADE OF FULL UPHOLSTERY IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS : AMREST IS HAVING TWO ADJUSTMENT HEIGHTS (UP & DOWN) .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* MECHANISM : SINGLE LOCKING MECHANISM. SEAT MAXIMUM HEIGHT IS 580MM & MINIMUM HEIGHT IS 480MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1110MM & MINIMUM HEIGHT IS1010MM* GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : 650MM NYLON BASE WITH SMOOTH CASTORS . 25 PROVIDING AND SUPPLYING 3 Seater Public Place Seating Chair of mildsteel with arm and backrest WITHOUT CUSHION,THREE SEATERTYPE WAITING AREA CHAIR - MATERIAL : STAINLESS STEEL SIZE 1820MM(L)X 690MM(D)X 790MM(H) COLOUR : SILVER/WEIGTH OF PRODUCT : 34 KG APPROX,* SUPPLYING AND PLACING IN POSITION OF A STAINLESS STEEL VISITOR BENCH OF SIZE IS 1820MM(L)X 690MM(D)X 790MM(H). THE COMPLETE STAINLESS STEEL BENCH HAS SEAT & BACK SINGLE SECTION. PER SEAT LENGTH IS @ 520 MM &SEATING HEIGHT IS @ 430 MM FROM GROUND . OWING TO THE SMOOTH FINISH, DURABILITY AND TENSILE STRENGTH BEAM STAINLESS STEEL MADE BY 1.6MM THICK.SEAT IS MADE BY 1.2MM THICK STAINLESS STEEL BORDER WITH CHROME PLATING FOR EVERY SEAT & BACK ; STAINLESS STEEL HANDLES CHROME PLATED & DIE PRESSED LEGS AT THE END OF CHAIRS.GROSS WEIGHT OF REGULAR 3-SEATER WILL BE 34 KG.THE STEEL GRADE 202 HIGH YIELD STRENGTH AS PER IS:513 & IS:304 GRADE. 26 Supplying of Portrait/Landscape Not applicable Fabric Pin Up Notice Boards(Fabric Pin Up Notice Boards 3 X 6 FT GREEN),Specification-Width of Board in mm:900 mm,Colour(Front/ Display layer):Green,Height of Board in mm:1800mm,Rear panel material of Board:Laminated sheet,Overall pinability depth ofBoard in mm:9 millimeter,Core material thickness inmm:9 millimeter 27 PROVIDING AND SUPPLYING COLLEGE DESK TOMKINS MATERIAL : PRELAMINATED PARTICLE BOARD WITH M.S BASE UNIT SIZE : 590 MM(L) X 1090 MM(D) X 830 MM(H) PER SEAT SIZE- 590 MM X 375 MM X 450 MM/ONE SEATER DESK SIZE :1090 MM(L) X830 MM(H) COLOUR : AVAILABLE ON REQUEST/FINISH : EPOXY POLYESTER ,* PROVIDING & SUPPLYING TWO SEATER COLLEGE DESK TOMKINS COMBINATION OF THREE ROWS FIRST , MIDDLE AND LAST SCRATCHPROOF EASY WIPE TOP / DURABLE ,STRONG & SAFE,UNDERSTRACTURE MADE OF MAIN FRAME MDE OF CRCA POWDER COATED IS GRAD:304 M.S BLACK POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON) EPOXY POLYESTER COATING.* TABLE TOP & MODESTY PANNEL MADE IN 18MM THICK PRELAMINATED PARTICAL BOARD OF GRADE II TYPE III OF IS 12823/LATEST WITH MACHINE PRESSED EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXEDDULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS.CHAIR WITH GAS LIFT ,A). BACK FRAME: 1.2MM COLD ROLLED STEEL/B). BACK BOARD: 10MM PLYWOOD, NO CUSHION C). SEAT BOARD: 15MM PLYWOOD, NO CUSHION/D). TIP-UP SYSTEM: SPRING MECHANISM E). 2. LEG: COLD-ROLLED STEEL, FIXING ON THE FLOOR BY SCREWS, 80 X 35 X 1.5MM THICK OVAL TUBE, BLACK POWDER SPRAYING.* THREE LAYER PRELAMINATED PARTICLES BOARD ( WOOD PRODUCT ) OF GRADE II TYPE III OF IS 12823/LATEST 28 Supplying of Material & Subtype Engineered Wood Table Top Material Engineered Wood Finish Matte Colour & Colour Family Brown - Classic Walnut Dimension (W)550mm X (D)550mm X (H)1200mm Size Compact Assembly Type Knock Down (Obelisk), 29 Suppling of Writing Board ( 4x10 Non-Magnetic) of material Top Surface materials (Used for white boardsurface)-Porcelain,Top surface material thickness -0.7 mm to 0.8 mm,Frame material -Anodized extruded aluminum alloy hollow section conforming to IS 733 (With latest amendment),Frame wall thickness-1.2 mm,Frame section front -20 mm,Frame section side -16 mm,Core material-MDF board grade-I conforming to IS 12406 (with latest amendment),Core material thickness -9 mm as per Department incharge 30 Supplying of 14 SEATER U -* PROVIDING & SUPPLYING U - SHAPE MODERN DESIGN CONFERENCE TABLE & IN BETWEEN U SHAPE TABLE TOP LENGTH IS @ 8850 MM, TABLETOP OFFERS YOU A GENEROUS WORKSPACE,DESK PRIMARY WORK SURFACE USE PREMIUM QUALITY MATERIALS OVER ALL SIZE IS 8850 MM(L)X 600MM(D)X 750MM(H) TABLE TOP MADE OF 36MM THICK WHICH GIVE MORE SURFACE AREA FOR WORK ,MACHINE MADE MODULAR FURNITURE MADE PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST, * CONSTRUCTION PROVISION OF CONFERENCE TABLETOP SUPPORTED WITH 18MM THICK SIDE PANNELS IN BROWN-BLACK OAK COLOUR MADE BY PRELAMINATED PARTICLE BOARD AND BELOW THE TOP 18MM THICK PRELAM PARTICLE BOARD MODESTY PANEL.OUR WORK SURFACE FURNITURE IS FINISHED WITH EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE,FIXED WITH HOT MELT GLUE. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST, 31 Supplying of * HIGH BACK 360° DEGRE REVOLVING CHAIR SKU : MARVEL/HB/ECO ,* ALL OVER SIZE IS : 595MM(L)X 670MM(D)X1380MM(H) ,*THE CHAIR MADE OF FULL MESH IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH ABOUT STYLE TYPE IS MODREN.DETAILS :* * ARMS : FIXED PP ARMSREST .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT).* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK :FRAME OF DESIGN SHALLBE CURVEDMADE OF TWO PIECES INJECTION MOULDED FRAME COVER WITH MESH .BACKREST SUPPORTADJUSTABLE LUMBAR SUPPORT* MECHANISM : SINGLE LOCKING MECHANISM . * ONLY SEAT SIZE IS 670MM(L)X 595MM(D)X470-570MM(H) , SEAT MAXIMUM HEIGHT IS 570MM & MINIMUM HEIGHT IS 470MM & BACK MAX HEIGHT IS @ 1380MM .* GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : NYLON BASE IS 620MM PITCH CENTER DIA (660MM WITH CASTORS) . 32 Supplying ofMEDIUM BACK 360° DEGRE REVOLVING CHAIR * ALL OVER SIZE IS : 595MM(L)X 670MM(D)X1125MM(H) ,*THE CHAIR MADE OF FULL MESH IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH ABOUT STYLE TYPE IS MODREN.DETAILS :* * ARMS : FIXED PP ARMSREST .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT).* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK :FRAME OF DESIGN SHALLBE CURVEDMADE OF TWO PIECES INJECTION MOULDED FRAME COVER WITH MESH .BACKREST SUPPORTADJUSTABLE LUMBAR SUPPORT* MECHANISM : SINGLE LOCKING MECHANISM .* ONLY SEAT SIZE IS 670MM(L)X 595MM(D)X470-570MM(H) ,SEAT MAXIMUM HEIGHT IS 570MM & MINIMUM HEIGHT IS 470MM & BACK MAX HEIGHT IS @ 1125MM .* GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : NYLON BASE IS 620MM PITCH CENTER DIA (660MM WITH CASTORS) . 33 Supplying of Tte Mild Steel Pipe of diameter 19 mm and wall thickness 16gauge. Classroom Chairs, tte,Thickness-2mm to 45mm,Material-Mild Steel Weight-Depends upon the size,Outside Diameter-0.80 Inch to 36 Inch 34 Supplying of 1-Bay Sprocket Chain Drive Mechanism MobileStorage Compactors,Material-Mild Steel Product Type-1 Bay,Height -7 ft,Storage Capacity-50-80 kg Usage/Application office, Home, Hospital, Store Room, Warehouse 35 Supplying of -- Movable File StorageSystem (Compactor) 1-Bay Mechnized Drive Type(COMPACTOR 2 ( 04 BODY)) 36 Supplying of Methodex MS1-6MCMETHODEX(Methodex MS1-6MC),Accutec Mobile Storage System,Material SS,Usage/Application-Warehouse Height-8-10 Feet,No of Layers-5 37 Supplying of : METAL STORAGE OF SIZE 900MM(L)X 450MM(D)X 1980MM(H) BODY MADE OUT IN 22 GAGUE(0.8MM) & DOOR 19 GAGUE(1 MM) CRCA SHEET. 4 ADJUSTABLE SHELVE IN 22 GAGUE(0.8MM) & PEDESTAL 18 GAGUE 1.2 MM CRCA SHEET. HAVING FOUR SHELVES MAKING FIVE COMPARTMENT, UNIFORMLY DISTRIBUTED LOAD CAPACITY OF EACH SHELF SHALL BE 60 KG MAXIMUM,FITTED WITH MS BODY LOCK & HANDLE. FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON)IN COLOR GREY-LIGHT GREY. 38 Supplying of : PREMIUM SUITESDIRECTOR TABLE STRUCTURE OF L-SHAPED DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 2400MM(L)X 2330MM(D)X 770MM(H) 45MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH RICH CHERRY FINISH SAME MATCHING EDGE BANDING MADE OF SAME RED CHERRY P.U POLISH.MODESTY IS DESIGNED WITH LEATHER PATCH.SIDE PANNEL IS MADE OF 36MM THICK . * PROVISION OF SIDE UNIT OF SIZE IS 1200MM(L)X 595MM(D)X 770MM(H) ,(COMBINATION CONSTRUCTION ON TABLE TOP WIRE MANAGEMENT 2 HOLE WITH SS GROOMENT & 1 HOLE WITH PVC GROOMENT ON TOP SIDE UNIT. BELOW TABLE TOP ONE KEYBOARD TRAY,IN SIDE UNIT BELOW THE TOP 1 KEY BOARD TRAY,1 OPEN BOX FILE ,1 DRAWER + 1 OPEANABLE DOOR SHELVE. * FIXED PEDESTAL OF SIZE450MM(L)X 400MM(D)X 690MM(H) , HAVING 3 EQUAL DRAWERS IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. * ALL THE MDF BORAD ARE IS-14587-1998 WITH CONFIRM TO DIN 68861.ISO 9001- 2015 QUALITY CERTIFICATION CONFIRMING TO ASTM D 4499 STANDARDS FOR VISCOSITY AND THERMAL STABILITY . 39 Supplying of* HIGH BACK 360° DEGRE REVOLVING CHAIR * ALL OVER SIZE IS : 590MM(L)X 505MM(D)X1280MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE BLACK FINISH FINSIH IN CONTEMPORARY STYLE . DETAILS :* ARMS :CHROMEFINISH ARMS WITH PU PADDING . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * MECHANISM : KNEE TILT MECHANISM . * ONLY SEAT SIZE IS 505MM(L)X 505MM(D)X610MM(H) & THE BACK SIZE IS 590MM(L)X 710MM(H) SEAT MAXIMUM HEIGHT IS 610MM & MINIMUM HEIGHT IS 510MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1280MM & MINIMUM HEIGHT IS1180MM * GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : 650 MM CHROME BASE WITH SMOOTH CASTORS . 40 Supplying of* FIX CANTILEVER CHAIR * ALL OVER SIZE IS : 570MM(L)X 500MM(D)X940MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : PADDED ARMREST. * USE OF PLY: SEAT & BACK PLYWOOD MADE OF 12 MM HOT PRESSED. * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * ONLY SEAT SIZE IS 570MM(L)X 500MM(D)X475MM(H) SEAT HEIGHT IS @ 940MM & BACK HEIGHT IS @ 475MM . * FIXED CANTILEVER CHAIR . * BASE : CHROME FINISH TUBLAR FRAME OF CANTILEVER TYPE . 41 * SUPPLYING AND PLACING FIVE SEATER (3+1+1) EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 3 SEATER- 1905MM(L) X890MM(D)X 870MM(H)SOFA SIZE IS 1 SEATER -(W)960mm X (D)890mm X (H)870mm ,WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME. * COMBINATION CONSTRUCTION STRUCTURE ARE MADE INMOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 28 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 50MM THIK,40MM THICK BACK FOAM HAVING 20 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 20 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BLACK-EERIE BLACK-COFFEE BROWN,BROWN-BURNT UMBER COLOUR, IT COMPLEMENTS THE MODISH LEGS ARE MADE BY ROUND SHAPE IN PVC MATERIAL. 42 Supplying of Material & Subtype Solid Wood - Beech Wood Table Top Material Clear Glass,Frame Material Solid Wood Leg Material Solid Wood,Finish Matte Colour & Colour Family Brown - Walnut,Dimension (W)1130mm X (D)630mm X (H)410mm,Number Of Recliners 1 Number Of Reclining Positions 3,Size Standard (HOPPER/CT), 43 Supplying of6 SEATER Rectangular MEETING TABLE DURIAN MODEL SMART/CON/6FT MADE OF PRELAMINATED PARTICLE BOARD WITHSLANTLEGS50X50 MM MS UNDERSTRUCTURE IN POWDER COATING 2TOP MADE OF25MMTHICK PRELAMINATED PARTICLE BOARD IN FROSTY WHITE COLOR WITH MAIN TABLE SIZE1800MM(L)X 1050MM(D)X 750MM(H) (SMART/CON/6FT/A), 44 SUPPLYING & PROVIDING CAFETERIA CHAIR SIZE IS 381MM(L)X 419MM(D)X839MM(H) A COMBINATION OF SYNTHETIC FIBER WITH STAINLESS STEEL MAKE THE PRODUCTS UTILE AND A DELIGHT, THE COMPLETE STRUCTURE SHALL BE MADE UP OF 20% GLASS FILLED BLOW MOLDED HIGH-DENSITY POLYETHYLENE ANDIS,THE FRAME STRUCTURE SHALL BE SUPPORTED BY ( 2 STRAIGHT + 2 SLANT ) FOUR LEGS.THE TUBULAR WELDED FRAME IS MADE FROM DIA2.22 +/- 0.03CMX 0.12+/- 0.0128 CM AND 3.5+/- 0.03 CM X 0.12+/- 0.0128 AM STAINLESS STEEL 202 GRADE TUBE & THE TUBE ARE BUFF POLISHED TO GIVE SHINY FINISH.SEAT AND IN BACK GIVEN HANDLE TO HOLDARE MADE OF INJECTION MOULDED HIGH IMPACT STRENGTH POLYPROPYLENE POLYMER COMPOUND WITH INDOOR GRADE UV RESISTANCE AND PRESSED FITTED WITH LEGS.THE CHAIR IS EASY TO STORE WHEN NOT IN USE, SINCE YOU CAN STACK UP TO 6 CHAIRS ON TOP OF EACH OTHER. (COCO/SUR). 45 SUPPLING OF METAL STORAGE OF SIZE 900MM(L)X 450MM(D)X 1830MM(H) BODY MADE OUT IN 22 GAGUE(0.8MM) & DOOR 19 GAGUE(1 MM) CRCA SHEET. 4 ADJUSTABLE SHELVE IN 22 GAGUE(0.8MM) & PEDESTAL 18 GAGUE 1.2 MM CRCA SHEET.HAVING FOUR SHELVES MAKING FIVE COMPARTMENT, FITTED WITH MS BODY LOCK & HANDLE. WITH 2 NUMBERS OF GLASS DOOR SHUTTERS , THE GLASS USED SHALL BE 4MM THICK CLEAR. UNIFORMLY DISTRIBUTED LOAD CAPACITY OF EACH SHELF SHALL BE 30 KG MAXIMUM.EACHRACKSHALLBEPROVIDEDWITHSTIFFENERATBOTTOMFOR STRENGTH.THE ENTIREBODYPANELAND SHELF SHALLBEMADEOF HIGHYIELD STRENGTH,THE COMPLETE STEEL STRUCTURE SHALL BE CONSTRUCTED BY WELDING AND PROVIDE FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON)IN COLOR GREY-LIGHT GREY 46 SUPPLING OF DIRECTOR DESKDIRECTOR TABLE STRUCTURE OF L SHAPED DESK .PRIMARY WORK SURFACE OVER ALL SIZE IS 1500MM(L)X 750MM(D)X 750MM(H) 36MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITHWENGE FINISH, USING HOT MELT GLUE TO FIXING 2MM THICK PVC EDGE BANDING MADE OF SAME MATTE FINISH. SIDE PANNEL IS MADE OF 25MM THICK.*PROVISION OF SIDE RUNNER OF SIZE IS 750MM(L)X 450MM(D)X 760MM(H) ,( CONSTRUCTION IS FROM RIGHT SIDE OF SIDE UNIT TOP BASED ON FIXED PEDESTAL WITH SS STUD OF GRADE 304, ON TABLE TOP PVC GROMENT HOLEFOR WIRE MANAGEMENT .*FIXED PEDESTAL OF SIZE450MM(L)X 450MM(D)X 650MM(H) PER DRAWER HEIGHT IS @ 136MM, FILLING DRAWER HEIGHT IS @ 300MM HAVING (2 EQUAL DRAWERS + 1 FILLING DRAWER) IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING.OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST , 47 SUPPLING OF* CANTILEVER CHAIR SKU : 70011/CN/A, * ALL OVER SIZE IS : 590MM(L)X 490MM(D)X980MM(H) , *THE CHAIR MADE OF FULL FABRIC INBLACK COLOUR . IT WILL COMES INFINSIH IN CONTEMPORARY STYLE . DETAILS :* ARMS : FIXED ARMS P.P. CONNECTED WITH SEAT AND BACK .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32(±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* BASE : M.S POWDER COATED TUBLAR FRAME OF CATILEVER TYPE . THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. 48 SUPPLING OF OFFICE DESKDESK STRUCTURE OF L SHAPED DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 1500MM(L)X 600MM(D)X 750MM(H) 25MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE WITH THE HOT MELT GLUE . MODESTY PANNEL 18MADE OF MM THICK . *PROVISION OF SIDE UNIT OF SIZE IS 900MM(L)X 450MM(D)X 750MM(H) ,(COMBINATION CONSTRUCTION WIRE MANAGEMENT HOLE WITH PVC GROOMENT ON TABLE TOP, LEFT SIDE TABLE TOP BASED ON A 18MM THICK SIDE PANNEL ENGINEERED WOOD & FROM RIGHT SIDE UNIT HAVE 2 SLIDING DOOR + 1 FIXED SHELVE . *SIDE UNIT SIZE900MM(L)X 450MM(D)X 750MM(H), IN PROVIDED WITH LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF SIDE UNIT IS 18MM THICK ALONG WITH FECIA OF SLIDDING SHUTTERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST . 49 SUPPLING OF * FIX CANTILEVER ,* ALL OVER SIZE IS : 595MM(L)X 510MM(D)X875MM(H) ,*THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS : PADDED ARMREST.* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* ONLY SEAT SIZE IS 500MM(L)X 510MM(D)X455 MM(H) & THE BACK SIZE IS 440MM(L)X 595MM(H) , BACK HEIGHT IS @ 440MM .* BASE : 4 LEGS METAL POWDER COATED* THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG WARRANTY-5 YEARS MAKE-DURIAN /GODREJ/FEATHERLITE 50 * PROVIDING AND SUPPLYING PENTA WORKSTATIONLSHAPE SINGLE SEATER UNIT NON SHARING IN COMPLETELY KNOCK DOWN CONDITIONS WITH AN OVERALL SIZE 1500MM(L)X 600MM(D)X 1200MM(H) THAT IS TO BE ASSEMBLED AT SITE. THE WORKTOPSHALLHAVETHESIZE1490MM-1490MM (L) x 592(D) MADEUPOF25MMTHICKPRE- LAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST . OF IS LEVEL WITH APPROVED LAMINATE AND FINISH AS PER APPROVED SHADE. * THE PROFILE OF THE TOP SHALL BE IN RECTANGLE SHAPE AND THE EDGES SHALL BE SEALEDWITH 2MM THICK THIN STRIP OF IMPERMEABLEPVCTHAT IS CUT TO FIT THE SIZE OF BOARD PANEL AND DULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS. * THE TOP TRIM, TOP BAR, MID BAR, VERTICAL BAR, RACEWAY, SKIRTING SHALL BE MADE UP OF ALUMINIUM EXTRUSIONS (PRE-TREATED)AND DULY POWDER COATED WITH POLYESTER POWDER COATING 40P-60PTHICK . THE TRIMS SHALL HAVE THE SIZE 67MM X 19MM WITH 1.5MMTHICKCOVERED WITH DIE CAST END CAPS ON JOINTS 2 WAYS,3 WAYS& 4 WAYS(L-COVERFORCORNER,T-COVERFORMIDDLESECTIONWHEREVER REQUIRED).THEALUMINIUMRACEWAYSHALLBESITUATEDBELOWTHEWORKTOPWITHAN OVERALLSIZE149MM(H)X60MM(D)WITH1.4MMCOVERTHICKNESSAND2MMBACK THICKNESS AS PER REQUIREMENT OF INLAYING THE ELECTRICAL MANAGEMENT AND CARRYING THE WIRE HORIZONTALLY. *THE EXPOSED VERTICAL AND HORIZONTALFACES OF THE FRAMES SHALL BE SNAPFITTEDWITHTRIMS.THERESHALLBESOFT-BOARD(WITHFABRIC)ANDMARKERBOARD PROVIDED AT FRONT OF THE USER. LAMINATED TOP TILE AND BOTTOM TILE SHALL BE SITUATED AT BOTH SIDES OF THE USER AND BELOW THE WORK TOP RESPECTIVELY. THE PARTITION SHALL HAVE CONCEALED WIRE MANAGEMENT CAPABILITIES AND SHOULD BE ENGAGED FOR RESPONSIVE AND SAFE OPERATIONSOF POWER,TELECOMMUNICATIONSANDDATA(LAN)AND HASSEPARATE COMPONENTS FOR ELECTRICAL, DATA AND TELEPHONE CABLES HAVING ADEQUATE CAPABILITY OF BOTH THE VERTICAL AND HORIZONTAL WIRE MOVEMENTS.SLOTS/CUT-OUTS SHOULD BE GIVEN ON RACEWAYSTOFIXALLELECTRICALANDDATAPOINTS.SINGLESIDEDPVCWIRE MANAGER SHOULDBE ENCLOSEDATTABLETOP.ADJUSTABLE LEVELLERSHOE SHALL BE PROVIDED AT BOTTOM OF THE PARTITION TO AVOID SCRATCHESON THE FLOOR.PARTICLE BOARD OF GRADE II OFISLEVEL. * THREE LAYER PRELAMINATED PARTICLES BOARD (WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST .* THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG WARRANTY-5 YEARS MAKE-DURIAN /GODREJ/FEATHERLITE 51 PROVIDING & SUPPLYINGFIXING OF TWO SEATER SCHOOL DESK WITH SHELF/STORAGE UNDER DESK WHICH ONE MADE BY CAST IRON,DESK TOP MADE BY 18MM THICK PRELAMINATED PARTICAL BOARD OF GRADE II TYPE III OF IS 12823/LATEST,TWO SEATER CLASSROOM DESK CUM BENCH, TOTAL SIZE OF BENCH : 1050MM(L)X 950MM(D)X 760MM(H) DESK SIZE : 1050MM (W) X 400MM (D) X 760MM (H) BENCH SIZE : 1050MM (W) X 310MM (D) X 390 / 760MM (H) BACK SIZE : 1050MM (W) X 150 MM (H),TABLE TOP SHALL BE POLYPROPYLENE CO POLYMER (PPCP).BANDING UNDER STRUCTURE-BLACK 9005 ERW PIPE (AS PER IS:7138) : 25X25X1.2MM SQUARE MS PIPE, OF THICKNESS 1.2MM IN BLACK EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON) AT BASE WITH PLASTIC CAPS MADE OF PP COPOLYMER (3530 GRADE) ARE ALSO PROVIDED ON THE REAR FRAMES ADDING MORE AESTHETIC VALUE TO THE PRODUCT. * ADDITIONAL HORIZONTAL SUPPORTS OF M.S. C SECTIONS OF 1.5MM THICK ARE PROVIDED BELOW THE DESK & SEAT.SHELF: 0.8MM THICK POWDER COATED M.S. SHEET BELOW THE DESK & HOOKS ON EITHER SIDE OF DESK IN M.S. ROD OF DIA 6MM.TOP,SEAT AND BACK PANEL: 18MM THICK PRE LAMINATED BOARD WITH MACHINE PRESSED EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXEDDULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS. * THREE LAYER PRELAMINATED PARTICLES BOARD ( WOOD PRODUCT ) OF GRADE II TYPE III OF IS 12823/LATEST.* 52 Suplying of Laboratory Steel Furniture Sidebench with rack and table top of specification,Size of side benches/Island benches (LxWxH):1800 mm X 1800 mm X 900 mm,Type of Frame for installation of bench:C type frame,C Type Fixed Under Bench Cabinet size:500 mm x 500 mm x 540 mm (having one door, one drawer and one adjustable/removable shelf) 53 Supplying of Laboratory Steel Furniture Island bench with table top Size of side benches/Island benches (LxWxH):900 mm X 1500 mm X 900 mm,Type of Frame for installation of bench:C type frame,C Type Fixed Under Bench Cabinet size:500 mm x 500 mm x 540 mm (having one door, one drawer and one adjustable/removable shelf) 54 Supplying ofPowder coated Round Classroom Stools Load of 50 Kg of stool of specification:Height Adjustment: Without Hydraulic,Frame and support made of CHROME PLATED MS TUBES,Chair Type:Non Revolving,Type of seating:Only seat,Pedestal base :Aluminium Die Cast 55 Suppling of Over Head Storage delite hi-tech of specification Material of Construction:ISI Marked, three layer Prelaminated particle Board conforming to Grade II Type III of IS 12823/2013 laminated with 0.6-0.8 mm thick lamination conforming to IS 2046/1995 and balancing lamination of 0.5 mm thick on the back side,Number of Shelves (Nos):2 Number of Doors (Nos) -2 ,Height in mm (±10 mm)-750,Depth in mm (±5 mm)-450 56 Suppling ofStainless Steel Name Plates, Monograms, Labels, As per BHEL ,Specifications :Stainless Steel Name Plates, Monograms, Labels, 57 Suppling of Aquaguard RO & UV both SS304 Drinking Water Coolers With Built In Water Purifiction System AquaguardR 58 Suppling ofStainless Steel External Branding Signage Boards, Size 22X6 Feet,Signage Printing-Single size vinyl print ,Material -Stainless steel ,Coating: Gloss or matte,Fabrication Specs-framing with one coat of red oxide & 2 coats of oil paint to avoid rusting 59 PROVIDING & SUPPLYING DIRECTOR DESKDIRECTOR TABLE STRUCTURE OF L SHAPED DESK .PRIMARY WORK SURFACE OVER ALL SIZE IS 2100MM(L)X 900MM(D)X 750MM(H) 50MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH CLASSIC WENGE BROWN FINISH 2MM THICK PVC EDGE BANDING MADE OF SAME MATTE FINISH. SIDE PANNEL IS MADE OF 50MM THICK* PROVISION OF SIDE RUNNER OF SIZE IS 1200MM(L)X 400MM(D)X 760MM(H) ,(CCOMBINATION ONSTRUCTION BELOW TABLE TOP 1 KEY BOARD TRAY IN PVC WITH TELESCOPIC CHANNEL ON RIGHT SIDE IS MOVABLESIDE RUNNERHAVING 1 OPENABLE DOOR WITH 1 FIXED SHELVE, 1 OPEN BOX WITH 1 FIXED SHELVE UPPER SHELVE HEIGHT IS @ 320MM BELOW SHELVE HEIGHT IS @324@ + 3 DRAWERS (2 EQUAL DRAWERS + 1 FILLING DRAWER)PER DRAWER HEIGHT IS @ 184MM, FILLING DRAWER HEIGHT IS @ 303MM HAVE CENTRAL LOCKAND HANDLES WITH CASTORS .* MOBILE PEDESTAL OF SIZE400MM(L)X 530MM(D)X 671MM(H) ,PER DRAWER HEIGHT IS @ 186MM, FILLING DRAWER HEIGHT IS @ 195MM HAVING (2 EQUAL DRAWERS + 1 FILLING DRAWER) IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING.OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST , 60 PROVIDING & SUPPLYING* FIX CANTILEVER CHAIR * ALL OVER SIZE IS : 610MM(L)X 505MM(D)X990MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE BLACK FINISH FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS :CHROMEFINISH ARMS WITH PU PADDING .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORTbackrest support* ONLY SEAT SIZE IS 610MM(L)X 505MM(D)X485MM(H) & THE BACK SIZE IS 610MM(L)X 540MM(H) ,* BASE : CHROME FINISH TUBLAR FRAME OF CANTILEVER TYPE . 61 PROVIDING & SUPPLYING OFFICE DESK STRUCTURE OF RECTANGULAR SHAPE .PRIMARY WORK SURFACE OVER ALL SIZE IS 1200MM(L)X 600MM(D)X 750MM(H) 25MM THICK TABLE TOP MADE OF 25MM THICK PRELAMINATED PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE WITH THE HOT MELT GLUE . MODESTY PANNEL MADE OF 18MM THICK, WIRE MANAGEMENT HOLE WITH PVC GROOMENT ON TABLE TOP.*CONSTRUCTION RIGHT SIDE OF TABLE TOP IS BASED ON A FIXED PEDESTAL3 DRAWERS & FROM LEFT SIDE OF TABLE TOP IS BASED ON 18MM THK ENGINEERED WOOD PVC EDGE BANDING PEDESTAL BACK,TOP,BOTTOM & DRAWERS ARE MADE OF 18MM THICK WITH 1 CPU TROLLY MADE IN BLACK METAL POWDER COATED.*FIXED PEDESTAL:L:410MM(L)X 580MM(D)X 750MM(H) ,IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823. 62 Suppling of Material & Subtype Solid Wood - Beech Wood Table Top Material Solid Wood,Leg Material Solid Wood Finish Glossy Colour & Colour Family Brown - Walnut Dimension (W)680mm X (D)530mm X (H)450mm Table Top Thickness 8mm,Size Compact, 63 PROVIDING & SUPPLYING ANGLE RACKOF SIZE 838MM(L)X 305MM(D)X 1676MM(H) STEEL BOOKCASE HAVING 4 DOORS AND K. TYPE OF LOCK: THREE WAYBOLTING DEVICE CONTROLLED BY LOCK, THICKNESS OF MS SHEET USED FOR SHUTTER: 0.7 MM, THICKNESS OF MS SHEET USED FOR SHELF: 0.7 MM, THICKNESS OF MS SHEET USED FOR TOP,BOTTOM, BACK AND SIDES: 0.7 MM, MATERIAL OF HANDLE: CAST BRASS, THICKNESS OF TRANSPARENT GLASS IN SHUTTERS: 4.0 MM, THE COMPLETE STEEL STRUCTURE SHALL BE CONSTRUCTED BY WELDING AND PROVIDE FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 60-80 MICRONIN COLOR GREY-LIGHT GREY. 64 Suppling of 3 Seater Public Place Seating Chair of mildsteel with arm and backrest WITHOUT CUSHION DURIAN,THREE SEATERTYPE WAITING AREA CHAIR -NIXON/SS/3 MATERIAL : STAINLESS STEEL,SIZE 1820MM(L)X 690MM(D)X 790MM(H)COLOUR : SILVER/WEIGTH OF PRODUCT : 34 KG APPROX,* SUPPLYING AND PLACING IN POSITION OF A STAINLESS STEEL VISITOR BENCH OF SIZE IS 1820MM(L)X 690MM(D)X 790MM(H). THE COMPLETE STAINLESS STEEL BENCH HAS SEAT & BACK SINGLE SECTION. PER SEAT LENGTH IS @ 520 MM &SEATING HEIGHT IS @ 430 MM FROM GROUND . OWING TO THE SMOOTH FINISH, DURABILITY AND TENSILE STRENGTH BEAM STAINLESS STEEL MADE BY 1.6MM THICK.SEAT IS MADE BY 1.2MM THICK STAINLESS STEEL BORDER WITH CHROME PLATING FOR EVERY SEAT & BACK ; STAINLESS STEEL HANDLES CHROME PLATED & DIE PRESSED LEGS AT THE END OF CHAIRS.GROSS WEIGHT OF REGULAR 3-SEATER WILL BE 34 KG.THE STEEL GRADE 202 HIGH YIELD STRENGTH AS PER IS:513 & IS:304 GRADE. 65 PROVIDING & SUPPLYING ANGLE RACKOF SIZE 900MM(L)X 450MM(D)X 1800MM(H) SLOTTED ANGLE RACK (OPEN TYPE) 6 SHELVES INCLUDING TOP & BOTTOM,ANGLES : 40MM X 40MM X 2MM(THICK).,SHELF : 36X15X1MM CRCA SHEET.IN COLOR GREY. 66 PROVIDING & SUPPLYING * FIX CANTILEVER CHAIR PROVIDING & SUPPLYING* ALL OVER SIZE IS : 590MM(L)X 490MM(D)X940MM(H) ,*THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS : PADDED ARMREST.* USE OF PLY: SEAT & BACK PLYWOOD MADE OF 12 MM HOT PRESSED.* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 35 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* ONLY SEAT SIZE IS 590MM(L)X 490MM(D)X450MM(H) SEAT HEIGHT IS @ 450MM .* BASE : 2 CHROME LEGS + BACK SIDE BOTTOM CHROME IN METAL . 67 * SUPPLYING AND PLACING THREE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1650MM(L) X750MM(D)X 710MM(H) WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME.* COMBINATION CONSTRUCTION STRUCTURE ARE MADE INMOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 25 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 40MM THIK,40MM THICK BACK FOAM HAVING 25 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 25 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BROWN-CAMEL BROWN COLOUR, IT COMPLEMENTS THE MODISH SLEEK STEEL . ( SEAT : 545 MM(D) X 410MM(H) , ARMS HEIGHT @ 610 MM /BACK HEIGHT @ 290 MM). 68 SUPPLYING AND PLACING30 SEATER U - shape MEETING TABLE with table top of Three Layer Prelaminated ParticleBoards Of Grade-II Type-II Of IS:12823/Latest (for 14 seater rate devided by 30X24} 69 SUPPLYING AND PLACING PREMIUM SUITESDIRECTOR TABLE STRUCTURE OF L-SHAPED DESK .PRIMARY WORK SURFACE OVER ALL SIZE IS 2400MM(L)X 2330MM(D)X 770MM(H) 45MM THICK TABLE TOP MADE OFSUPPLYING AND PLACING PRELAMINATED PARTICLE BOARD WORK SURFACE WITH RICH CHERRY FINISH SAME MATCHING EDGE BANDING MADE OF SAME RED CHERRY P.U POLISH.MODESTY IS DESIGNED WITH LEATHER PATCH.SIDE PANNEL IS MADE OF 36MM THICK .* PROVISION OF SIDE UNIT OF SIZE IS 1200MM(L)X 595MM(D)X 770MM(H) ,(COMBINATION CONSTRUCTION ON TABLE TOP WIRE MANAGEMENT 2 HOLE WITH SS GROOMENT & 1 HOLE WITH PVC GROOMENT ON TOP SIDE UNIT. BELOW TABLE TOP ONE KEYBOARD TRAY,IN SIDE UNIT BELOW THE TOP 1 KEY BOARD TRAY,1 OPEN BOX FILE ,1 DRAWER + 1 OPEANABLE DOOR SHELVE. * FIXED PEDESTAL OF SIZE450MM(L)X 400MM(D)X 690MM(H) , HAVING 3 EQUAL DRAWERS IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. * ALL THE MDF BORAD ARE IS-14587-1998 WITH CONFIRM TO DIN 68861.ISO 9001- 2015 QUALITY CERTIFICATION CONFIRMING TO ASTM D 4499 STANDARDS FOR VISCOSITY AND THERMAL STABILITY . 70 SUPPLYING AND PLACING* HIGH BACK 360° DEGRE REVOLVINGCHAIR * ALL OVER SIZE IS : 673MM(L)X 508MM(D)X1270MM(H) , *THE CHAIR MADE OF FULL NATURAL LEATHER IN BROWN COLOUR . IT WILL COMES IN MATTE FINSIH EXTRA PADDED DESIGNED FOR MORE CONFIRMT AT WORKPLACE IN CONTEMPORARY STYLE . DETAILS :* ARMS : WOODEN ARMS WITH LETHER PADDING ARM REST ARE FITTED TO THE SEAT & BACK.* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT . * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK .BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* MECHANISM : MULTI-LOCKING KNEE TILT MECHANISM .SEAT MAXIMUM HEIGHT IS 580MM & MINIMUM HEIGHT IS 500MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1270MM & MINIMUM HEIGHT IS 1219MM* GAS LIFT 80MM TELESCOPIC HAUDRAULIC * BASE : THE PRONG (BASE) IS MADE OF SOILD WOOD WITH POLISHEDAND FITTED WITH 5 NUMBERS. TWIN WHEEL CASTORS (CASTOR WHEEL DIA. 50MM) & 700MM PITCH CENTER DIA (740MM WITH CASTORS) . 71 SUPPLYING AND PLACING Material & Subtype Leather - Semi Aniline Leather,Metal - Stainless Steel,Frame Material Solid Wood Upholstery Material Leather,Seat Material Leather Leg Material Metal,Finish Matte,Colour & Colour Family Beige - Mushroom,Dimension (W)1140mm X (D)1000mm X (H)940mm Mechanism Click Clack Mechanism,Seating Capacity 1 Seater Seating Height 430mm,Function Adjustable Headrest Size Grand. 72 SUPPLYING AND PLACING Material & Subtype Leather - Semi Aniline Leather,Metal - Stainless Steel,Frame Material Solid Wood,Upholstery Material Leather,Seat Material Leather,Leg Material Metal,Finish Matte,Colour & Colour Family Beige - Mushroom,Dimension (W)2130mm X (D)1000mm X (H)940mm Mechanism Click Clack Mechanism,Seating Capacity 3 Seater Seating Height 430mm,Function Adjustable Headrest Size Grand. 73 SUPPLYING AND PLACING Rectangular CENTRE TABLE with Marble Top of 1219mmX711mm,(DAISY/CT (W)1300mm X (D)650mm X (H)450mm),Specifications:Number of storage under top No storage,Top material,Tempered glass,Frame material No frames,Dimension of Top (Length X Breadth, or Diameter) ±20mm,762mmX457mm,Height of centre table ±10mm,410,millimeter,Thickness of top material (+/-2 mm)- 8 millimeterThickness of frame material (+/- 1 mm)-10 millimeter 74 SUPPLYING AND PLACING 14 SEATER oval MEETING TABLE with table top of Three Layer Prelaminated Particle Boards Of Grade-II 75 SUPPLYING AND PLACING 6 Seater Sofa Material & Subtype-Premium Leatherette,Frame Material Solid Wood,Upholstery Material Premium Leatherette,Filling Material Foam,Silicone Fiber,Seat Material Premium Leatherette-Leg Material Solid Wood,Finish Matte,Colour & Colour Family Brown -Coffee Brown Dimension (W)4865mm X (D)960mm X (H)820mm,Seating -Capacity 3 Seater,seating Height 475mm,Size Standard 76 SUPPLYING AND PLACING9 SEATER U -* PROVIDING & SUPPLYING U - SHAPE MODERN DESIGN CONFERENCE TABLE & IN BETWEEN U SHAPE TABLE TOP LENGTH IS @ 4650 MM, TABLETOP OFFERS YOU A GENEROUS WORKSPACE,DESK PRIMARY WORK SURFACE USE PREMIUM QUALITY MATERIALS OVER ALL SIZE IS 4650 MM(L)X 600MM(D)X 750MM(H) TABLE TOP MADE OF 36MM THICK WHICH GIVE MORE SURFACE AREA FOR WORK ,MACHINE MADE MODULAR FURNITURE MADE PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST,* CONSTRUCTION PROVISION OF CONFERENCE TABLETOP SUPPORTED WITH 18MM THICK SIDE PANNELS IN BROWN-BLACK OAK COLOUR MADE BY PRELAMINATED PARTICLE BOARD AND BELOW THE TOP 18MM THICK PRELAM PARTICLE BOARD MODESTY PANEL.OUR WORK SURFACE FURNITURE IS FINISHED WITH EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE,FIXED WITH HOT MELT GLUE. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATESt. 77 * SUPPLYING AND PLACING THREE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1650MM(L) X750MM(D)X 710MM(H) WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME.* COMBINATION CONSTRUCTION STRUCTURE ARE MADE INMOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 25 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 40MM THIK,40MM THICK BACK FOAM HAVING 25 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 25 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BROWN-CAMEL BROWN COLOUR, IT COMPLEMENTS THE MODISH SLEEK STEEL . ( SEAT : 545 MM(D) X 410MM(H) , ARMS HEIGHT @ 610 MM /BACK HEIGHT @ 290 MM) 78 SUPPLYING AND PLACING Wooden Acoustic Wall Cladding/Panelling- Providing and fixing in position wood wall paneling of width 128mm, thickness of 16mm and length 2440 mm made up of high density fiber board with minimum density of 800 Kg/m3 substrate with a laminated facing/wood veneer as per the approved shade/species & finish with melamine balancing layer on the reverse side. The boards shall have a special perforation pattern of 2mm groove & 14mm pitch. The panels shall have fire resistance of Class 1, BS 476 part 7. The edges of the panels shall be tongued-and-grooved to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece and backed with 50mm thick glass wool layer as directed by the Engineer-in-Charge. The panel shall be mounted on special channels using clips as approved by the Engineer -in-charge. Install Gel stud of section 48X34X36 mm or as approved by the Engineer -in- Charge on the solid wall horizontalty using screws and plugs at spacing of 600mm centre-to-centre, Screw the aluminium channel (keel) vertically on channeled G.I stud 600mm 79 SUPPLYING AND PLACINGBlackout roller blind,Specifications-Mounting arrangement profile systems – clicked on hidden mounting clipsTypes of roller blind,Blackout roller blind-Shading solutionSingle roller blind – utilise one layer of fabric (called outer layer Operating mechanism-Side winders (that lock the manually adjustable blinds at different levels with the internal ratchet and tension adjusted by spring inside the tube) 80 Providing and Fixingof Drawers in Brown Finish ,Specification-Material : High QualityParticle board Dimensions (In Centimeters)-H 91 x W 90 x D 44 Dimensions (in Inches)-H 36 x W 35.5 x D 17.5 Primary Material-Engineered Wood as per Engineer incharge 81 Providing and FixingSTAGE - Providing & fixing raised stepped floor (Stage) Consisting ofMS Tabular frame work ofPipe Section (HOT ROLLED/COLD ROLLED) size 50mmx 50mmx2.0mm.tk. duly Painted with one coat of Red Oxide steel Primer, fabricated in module of 600 x 600 mm frame gid (as per Design or as instructed) with support of same section Legs /frame fixed on existing floor from base and raised at height minimum 150mm to max 200mm as required, from Existing floor. Vc providing and fixing 18mm thick heavy duty high density (1450 kg/cum) cement fiber Board fixed by SS. Screw on Horizontal & Vertical Surface on Existing Framework with one coated cement primer on Board and covering Board from top and sides by 2mm thick Vinyl flooring of approved make,colour and texture to be layed and fixed on sub floor smoothly finished and levelled by recommended adhesive cutting fixing and including covered raised portion of Board from all sides etc. complete,suitable for use up to the satisfaction of Engineer- in-charge.Design as approved by Engineer-In-charge. Base ofthe Vertical Legs of M.S. Frame (COLD ROLLED/HOT ROLLED) 82 Providing, fixing & installation MICROPHONE:-Flat frequency response across the vocal range for uncolored sound interchangeable cardioid, supercardioid, and omnidirec- tional cartridges that provide choices for applications Sleek, low-profile design for unobtrusive appearance Balanced transformerless output for increased immunity to noise over long cable runs-Compact Cinema Surround Speaker for Digital Applications:- Frequency range: 50 Hz to 20 kHz • High sensitivity: 91 dB SPL, IW @ 1m (3.3 ft) High power handling capability: 150 watts, continuous pink noise Internal Thermomaster• technology allows for unprecedented high frequency power in a compact, molded enclosure Convenient mounting design supports JBL QuickMountre, OmniMount• or APC multimount brackets Special cabinet shape incorporates 20• angled front baffle SMPTE/lS02969 Curve X high frequency de-emphasisMixer 8 input mono mixer XLR input switchable between mic and line level +/- 15dB gain trim control per input Input 1 is switchable to be pre/post master 24VDC or mains power operation Optional remote VCA/Tone generator/ Muting boards available • Whisper quiet operation 83 Supply, Installation, Testing and commissioning of microphone Delegate unit. 84 Supply, Installation, Testing and commissioning of microphone Chaiman unit, 85 Supply , Installation , testing and commissioning of Factory made 1.4HDMl Cable along with connector (15mtr length) 86 Supply , Installation , testing and commissioning of Factory made VGA along with Connectors.(15mtr length) 87 Supply , Installation , testing and commissioning of Factory made RCA along with Connectors.(15mtr length) 88 Supply , Installation , testing and commissioning 40W power Amplifier of following features:- Rated output wattage - 240W, amplifier output IOOV, 70V and 4-16 ohms transformer isolated speaker outputs, Supply input 0.775 v (OdB) unbalanced, 10k ohms, XLR and phone jack frequency 89 Supply , Installation , testing and commissioning10W wall mount speaker- Supplying, installation, testing and commissioning of 240W power amplifier with following features:- Rated output wattage- 240W, amplifier output 100V, 70V and 4-16 ohms transformer isolated speaker output, Supply input 0.775 v (0 db) unbalanced, 10k ohms, ZLR and phone jack frequency response 50 - 18000 Hz, +/- 1.5 dB, S/N ratio > 105 dB. 90 Supply , Installation , testing and commissioningCONFERENCE CONTROL UNIT, line Output 1 17.5V DC/3a Max.; -34dBV (20mV), line Output 2 17.5V DC/3a Max.; -34dBV (20mV), power Output 50w rMS at 2% THD, 90w Max. inputs 3xMic 0.65mV/4.7kQ Ixaux IOOmV/470kQ Frequency response 60-14,000Hz (± 3dB) 91 Supplying of Material & Subtype Engineered Wood Finish Matte,Colour & Colour Family Brown - Wenge Dimension (W)800mm X (D)384mm X (H)1970mm Size Standard,Style Contemporary,Assembly Type Knock Down 92 Supplying of Powder Coated Extruded Aluminium Sections Hybrid panel based system (combination of sliding & snap fit tiles) Modular Work Stations 93 Supplying of11 SEATER U - shape MEETING TABLE with table top of Three Layer Prelaminated Particle Boards Of Grade-II Type-II Of IS:12823 94 SUPPLYING AND PLACINGSLOTED ANGLE RACKOF SIZE 900MM(L)X 450MM(D)X 1800MM(H) SLOTTED ANGLE RACK (OPEN TYPE)6 SHELVES INCLUDING TOP & BOTTOM,ANGLES : 40MM X 40MM X 2MM(THICK).,SHELF : 36X15X1MM CRCA SHEET.IN COLOR GREY, 95 SUPPLYING AND PLACING : METAL STORAGE OF SIZE 900MM(L)X 450MM(D)X 1980MM(H) BODY MADE OUT IN 22 GAGUE(0.8MM) & DOOR 19 GAGUE(1 MM) CRCA SHEET. 4 ADJUSTABLE SHELVE IN 22 GAGUE(0.8MM) & PEDESTAL 18 GAGUE 1.2 MM CRCA SHEET. HAVING FOUR SHELVES MAKING FIVE COMPARTMENT, UNIFORMLY DISTRIBUTED LOAD CAPACITY OF EACH SHELF SHALL BE 60 KG MAXIMUM,FITTED WITH MS BODY LOCK & HANDLE. FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON)IN COLOR GREY-LIGHT GREY. 96 Providing and fixing e Slimline Tower AC (2 Ton White),Availability of BIS/ISI Mark Certification for Split AC Floor type-Yes,Technology of air conditioner,Non Inverter AC-Nominal Marketing capacity as per BEE Star Rating Label (hint: 1 Ton = 3000 Kcal/Hr, Tolerance +/- 10%) (in Ton)-3 BEE Star rating of the product (Central Ministries/Departments while procuring shall ensure that the items carry 5 star (under normal conditions where annual usages is expected to be more than 1000 hrs),3 Star (where usage is Limited)or higher Star R NA- Star rating for the capacity of >10,465 Watts (>9,000 kcal/hour) 97 Providing & Fixing 2.0 mm thick homogenous single layered vinyl flooring. The flooring shall be laid in manner to provide comfortable and jerk free surfaces including material, adhesive, scaffloding and lead and lift at all floor level etc. complete as per direction and approval of Engineer-in-charge. 98 Providing & Fixing Wiring for Primary Raw Power point 2 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insuate copperconductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point With 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 2 nos 6A Switch with Front plate and metal Box with all Accessroies for users. 99 Providing & Fixing Wiring for Secondry Raw Power point 2 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 2 nos 6A Socket controlled by 1 nos 6A Switch with Front plate and metal Box with all Accessories. 100 Providing & Fixing Wiring for Primary Raw Power point 1 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 1 nos 6A Socket controlled by 1 nos 6A Switch with Front plate and metal Box with allAccessories. 101 Providing & Fixing Wiring for Secondry Raw Power point 1 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 1 nos 6A Socket controlled by 1 nos 6A Switch with Front plate and metal Box with allAccessories. 102 Wiring for Primary Power point 6/16 Amp Switch-Socket Outlet with 4 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq-mm FR PVC insulated copper conductor Wire. Providing and fixing 1 nos 6/16A Socket controlled by 1 nos 16A switch with front plate and metal box with allAccessories. 103 Providing & Fixing Standing Bathtubs Specifications:Size:1690x800x445/565mm Free Standing Bath Tub with Over Flow & Drain 104 Providing & Fixing Corazzin Garden Patio Seating Chair and Table Set Outdoor Balcony Garden Coffee Table Set Furniture with 1 Table and 4 Chairs Set (Black) 105 Providing & Fixing Reliable Drapes Cotton Plain Door Curtains Reliable Drapes,Cotton GSM Quality-220,Lining included-No, Pack of-1,Length (Ft)-8.5-9,Width (Ft)-3-3.5 106 Providing MattressDimension 1981 mm X 1829 mm,Thickness of Core Layer (Height of Spring) 200 mm,Thickness of Felt (±1 mm) for Bonnell Spring 12 mm,Thickness of Top Layer (±2 mm)-50 mm Thickness of Bottom Layer (±2 mm)50 mm,Type of Spring in Core Layer Bonnell Spring (with cotton felt),Material of Top Layer Visco Elastic PU Foam (Memory Foam) 107 ProvidingCotton Pillow 33 cm x 56 cm (COTTON PILLOW)of Specification-BIS Marking ( For Body Casing fabric )-No Logo Marking-No,type of Logo,Stitched ( Patch Logo ),Agree to provide 108 Providing240 centimeter x C1112M 135 centimeter (L x W) Printed Bed Sheets(BED SHEET ):Technical Specification of the Product-Sheeting, Tickings and Bedsheets (V2) as per IS 175 BIS Certifcation-No,VarietyVariety - 2,Process of colouring Dyed,Matching Pillow cover 109 Providing 25 liter 3 Star Water Heater,25 Ltr 5 Star Water HeaterCapacity litres (Litres),BEE Star Rating (Central Ministries/ Departments while procuring shall ensure that the items carry 5 star or higher Star Rating of BEE)-3,Availability of Type Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification-No,Material of Inner Container Vitreous enamelled inner tank conforming to IS-13273 110 Providing Wall Mount Mesh Filter T-Shapped Kitchen-Chimney Material of Blower Body-Aluminium,Material of Blower Blade Aluminium,Material of Exhaust pipe-pvc,Filter Material,Stainless Steel,ShapeT-Shapped,Filter Type,Mesh Filter,Control Panel Type Soft Touch,Mount Type,Wall Mount 111 Providing Potable Water Purification System With Inbuilt Water Cooler. RO UV Aquaguard(Hot & Cold uv+ ro) Specifications-Flow rate (Litres/hr.)-12,Cold water storage capacity (Litres)-11 liter,Cooling capacity (litres/hr.)-4,Hot water storage capacity (Litres)-1.5 liter,Heating capacity (litres/hr.)-1.5,Cooling power consumption (Watts)-230,Heating power consumption (Watts)-550. 112 Providing300 L 3 Star Frost Free Double Door Refrigerator, of specification Cooling type:Frost free,Exterior body built:steel,Shelf material -Toughened glass,Voltage Range-160-300V,frequency-50 Hz 113 Providing900 mm wide 2000 mm high Metal Shelving Racks,Specifications :Type-OPEN TYPE Number of Shelves/Compartments (Top / Ceiling Shelf - not to be counted)-4,Shelves Material-0.8 mm Thick MS Sheet Conforming to Commercial Quality CR-1, Grade 340 of IS 513,Depth in mm (±5 mm)-400,Width in mm (±5 mm)-900,Height in mm (±5 mm) 2000 114 Providing and fixing Drawers of Specification of Dimension (in cm)-H91 X W90 X D44in Brown Finish,primary material-Engineered wood,Weight 49.45kg 115 Providing and fixingDressing Table With cupboard and open shelves-Design of Dressing table With drawers,cupboard and open shelvesBase of dressing table Rectangular wooden frame Number of side mirror-1 number, Material specification-Prelaminated particle board of grade II type III of IS 12823/Latest.both side laminated. outer side laminated with shade matching with top shade and fascia shade and having balancing laminate of 0.5mm thick on other side Material thickness of complete body, Fascia and drawer/cupboard-19 millimeter,Material thickness for back, partition and drawer /cupboard bottom ± 2mm,19 millimeter 116 Providing and fixing Material & Subtype Solid Wood - Rubber Wood Table Top Material Solid Wood-Frame Material Solid Wood,Finish Glossy,Colour & Colour Family Brown - Walnut Dimension Of Table (W) 600mm X (D) 600 X (H) 610mm Dimension Of Chair (W)640mm X (D)530mm X (H)560mm Size Standard 117 Providing and fixing Wooden Double Bed Storage Box Opening From Material of Mattresses Panel-Other wood, Material of Bottom Panel of Storage Box-Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Material of Front, Back and side Panels Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Material of Headrest Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Material of Legrest-Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest,Type of Bed-Wooden Double Bed Material of Bed Frame-Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest 118 Providing and fixing 1 Seater Sofa With Leatherite Cover Sofa Set is Foldable to use as bed-No Backrest Cushion Material-Foam,density of Cushion of Backrest Material (Kg/Cubic M)-40 Covering Material for Seat and Backrest Fabric Frame Structure Material and size (±1 mm) Any other wood of minimum 25 mm thickness Seat Cushion MaterialFoam 119 Providing and fixing 8 SEATER Rectangular MEETING TABLE with table top of Three Layer Prelaminated Particle Boards Of Grade-II Type-II Of IS:12823/(Elanor Marble 8 Seater Dining Set) 120 Providing and fixing MODULAR TABLE L X D & H 2000 millimeter X 450 millimeter 700 millimeter (Alice TV Unit marble),Sprcification-Mode of Supply of modular table Knocked Down to be assembled at consignee site by the Seller Storage Provided one side,Number of storage unit-triple storage,Table Top material and thickness ±3mm-25mm thickness three layer pre-laminated Particle boards (Wood Product) of grade II Type II of IS 12823 Latest Gable end and modesty panel material and thickness-18 mm thickness three layers pre-laminated Particle boards (Wood Product) of grade II Type III of IS 12823 Latest 121 Supplying of Library Management Department. and NDL Softwares,Server Machines, Air-Condition Systems,Xerox Machines,Lamination Machines, CONNECTION)Binding Machines,Furniture/Furnishing. Computers, Printers,Computer System(with Internet Connection) 122 Supplying of Printer of Specification A Printing Technology Laser-Cartridge Technology,Composite Cartridge,Type of Printing Mono,Paper Size-A4 Print Speed per minutes per Department Incharge 123 Supplying of XEROX Machine(standard company) Type of MachineMultifunction Machine,Print Technology-Laser Type of Printing-Mono,Cartridge Technology Separate Drum and Toner (Dual Component) Platen/Flatbed Size-A3/A4,Paper Size (Original/Image)A3/A3 RAM size (MB)-4096as per Department incharge 124 Supplying of Determination of wavelength of He-Ne Laser light using Grating(Specification- Output Power: up to 15mW, CW - Wavelength: 632.8nm,* Mode Structure: TEM00 (>95%)* Beam size: <= 1mm* Beam Divergence: <= 1.5 mrad* Polarisation: Unpolarised, Vertical Polarisation. complete set up as per Department incharge 125 Supplying of Brewsters Law using spectrometer(Brewsters angle apparatus differ goniometer digital research bench polarizer analyser with rail type bench abron). complete set up as per Department incharge 126 Supplying of Determination of wavelength of Sodium light using Michelson interferometer(Power-3 kW,Usage-Physics Lab,Material-Mild Steel,Power Source,Electric Voltage 240 V). complete set upas per Department incharge 127 Supplying of Determination of wavelength of Sodium light using FabryPerot interferometer complete set up of Specification Flatness of Reflective Mirrors-λ/20 Diameter of Reflective Mirrors-30 mm Reflectance of Mirrors-95% Effective Travel of Preset Micrometer~ 3 mm Min Division Value of Preset Micrometer-0.01 mm Travel of Fine Adjustment of Movable Mirror-1.25 mm Resolution of Fine Adjustment-0.0005 mm Low-Pressure Sodium Lamp-20 W as per Department incharge 128 Supplying of Resolving Power of Telescope complete set up (specification Color-BlackMaterial-Plastic as per Department incharge) 129 Supplying of Resolving Power of Prism(Resolving power of telescope assists the user to know the basic principle of telescope. Fabricated using excellent quality metals, glass and plastic material, it is widely used instrument in scientific lab of colleges and research centers. It is known for accurate calculation and longer service life) complete set up as per Department incharge 130 Supplying of Production and analysis of Polarised light using half and quarter wave plate(Usage/Application Laboratory Voltage-230 V,Color-Black,Material-SS). Complete set up as per Department incharge 131 Supplying ofLogarithmic Amplifier(Built in power supply : +15V & -15V DC,Mains : 230V AC,Dimension : 27CMS X 17CMS [metal cabinet,Weight : 2KGS APPX) complete set up as per Department incharge as per Department incharge 132 Supplying of Zener diode characteristics & voltage stabilizer. Complete-Specification:(Voltage-240 V Frequency-60 Hz,Display Type -Analog)in all respect as per Department incharge 133 Supplying of FET characteristics complete up(Technical specifications-Inbuilt variable, overload & short circuit protected DC regulated power supplies of 0- 5 volt & 0- 15 volt.Voltmeter & ammeter are mounted on the front panel.One FET.Highly insulated front panel .Trainer helps to demonstrate the working principle of FET.Set of required number of patch cords.Multi - colored sockets are used.Housed in an elegant powder coated metal cabinet.Strongly supported by a comprehensive instruction manual complete with theory and operating details.LED indication for supply “ON” to work on 220V AC Mains.) as per Department incharge 134 Supplying of MOSFET characteristics complete set up(Specificaion:Power-AC Mains,Usage/Application-Laboratory Type-Analog,Material-plastic,Power Supply-ac mains, as per Department incharge 135 Supplying of UJT characteristics complete set up(Specification-Usage/Application-laboratory,Type-Analog,Display Type-Analog meters,Power Supply-ac mains)as per Department incharge 136 Supplying of Transistor biasing (CE mode)(Specificaion-Operating Power Supply-220VAC On Board Power Supply 0-1VDC & 0-10VDC Experiment Input & Output Char In CB & CE Mode OF PNP Tr.Meter Type Analog / Digital)set up as per Department incharge 137 Supplying of Characteristics of SCR(SpecificationUsage/Application-laboratory Type-Analog Automation Grade-Manual ,Power Supply-ac mainscomplete set up as per Department incharge 138 Supplying of Basic Logicgates and Universal gates. Operating Supply Voltage 230V,Logic Family-DIGITAL,Number of Inputs per Gate-2,Usage Laboratory,Material-ELECTRONIC Complete set up in all respect as per Department incharge 139 Supplying of Op-amp Integrator &Differentiator. Complete set up in all respect :Product Specification:Type-Analog Material-Metal,Automation Grade=-Manual,Color-black with multicolour PVC front panel,Power Supply-230,Capacity--5,connector Type-patch cord sas per Department incharge 140 Supplying of Half Adder, Full Adder and 4-bit binary Adder. Complete set up in all respect (Product Specification:Type-Digital,Display Type-Digital Interface--NO Material-ABS,Display-Digital,Pulse Generator-50Hz Variable Dc Output-no)as per Department incharge 141 Supplying of G. M. Counter for 6 digits GM counter with built in power supply complete set up(G.M.COUNTER: COMPLETE WITH INBUILT POWER SUPPLY EHT 250-1200v Workable on 220v. 50Hz., Power consumption 8W approx. STOP, START, RESET switches. Counts Capacity : 6 DIGIT COUNTING SYSTEM, Preset time : 3 DIGIT PROGRAMABLE TIMER WITH DIGITAL DISPLAY. 3 ½ Inbuilt Digital Volt Meter for GM TUBE Voltage. G.M.TUBE: END WINDOW G.M.TUBE MOUNTED IN ACRYLIC STAND. WITH ‘LEAD’ AND ‘ALUMINIMUM’ ABSORBENTS, Radioactive Source: ONE RADIOACTIVE SOURCE BETA or GAMMA (in Lead Container and wooden Box) SOURCE, . Dimensions : 460X370X230mm.(Complete instrument is HOUSED in corrugate box with Export Packaging) Wight : Total weight of the Instrument is 5.5kg.) as per Department incharge 142 Supplying of Measurement of Dielectric constants of solid and liquid samples complete set up(It Consists of following partsRF Generator (9-10MHz Approx) Micro Ammeter (Range 0-50mA) Potentiometer for Sensitvity Selection Fixed Capacity (Metal) Variable Gang Capacitor Socket for test Capacitor & Variable Capacitor brought out at front panel One Solid bakelite plate to be insert in gap of test capacitors)as per Department incharge 143 Supplying of Study of Dielectric constants and Curie temperature of ferroelectric ceramics Complete in all respect(Specifications Temperature Range : Ambient to 200°C,Display : 31/2 digit, 7 segment LED with autopolarity & decimal indicationResolution : 0.1°C,Accuracy : ±0.5°C (typical),Stability : ±0.1°C Power : 150W,(ii) Digital Capacitance MeterThis a compact direct reading Instrument for the measurement of capacitance of the sample. Specifications,Range : 50-6000 pf,Resolution : 1pf Display : 3½ digit, 7 segment LED, Typical results obtained with the above set-up are as shown in the graph) as per Department incharge 144 Supplying of Determining Optical constants of a metal by reflection of light Complete in all respect (Specification-Power-AC Mains,Usage/Application-Laboratory,Type-Digital Material-Metal,Automation Grade Manual,Color-White Power Supply-AC Mains,Display Type-Digital) as per Department incharge 145 Supplying of Lattice dynamics kit with frequency meter (Technical Specifications: Audio Oscillator 100 khz,Built in Power Supply and Output Stage to match the Impedance of Simulated Lattice,Lattice DynamicKit consists of Transmission line, which Simulates One-Dimensional Mono-AtomicandDi-atomicLattices,. LCD Based Frequency Counter is Provided on panel to Measure Frequencycomplete set up as per Department incharge 146 Supplying of BCD to seven segments complete set up(Specification:Built in power supply : +5V DC Mains : 230V AC Dimension : 27CMS X 17CMS [metal cabinet] Weight : 2KGS APPX) as per Department incharge 147 Supplying of Monostable Multivibrator using Oscilloscope (CRO) complete set up (Specification:Usage/Application Laboratory Packaging Type-Corrugated Box,Connector-2mm sockets Frequency Range -50Hz) as per Department incharge 148 Supplying of Bistable multivibrator using Oscilloscope(CRO))Technical Specification:(Built in power supply : +12V & -12V DC Mains : 230V AC,Dimension : 27CMS X 17CMS [metal cabinet] Weight : 2KGS APPX)complete set up as per Department incharge 149 Supplying of Pulse code modulation and demodulation complete setup (Product Specification,Type Laboratory Trainer Kit Usage/Application-Laboratory,Accuracy-+/- 10%,Frequency-50 Hz Input Voltage-220V,Packaging Type-Corrugated Box,Power Source-ElectricShape-Rectangular,Material-ABS or Metal Cabinet)as per Department incharge 150 Supplying of Addition, Subtraction, Multiplication using 8086 microprocessor(Product Specification,Usage/Application-LaboratoryType-Fully Automatic,Automation Grade-Semi-AutomaticClock Frequency-Yes,Color-Green,Display-Digital Packaging Type-Corrugated Box, Power-200-400 Weight 2 Kg) as per Department incharge 151 Supplying of Thevenin theorem, (THEVENIN’S AND NORTON’S THEOREM APPARATUS,Technical specifications Inbuilt fixed DC regulated power supply of 12 volt. Voltmeter & ammeter are mounted on the front panel. Resistive network is used in the circuit. Circuit diagram is printed on highly insulated front panel . Trainer helps to demonstrate the working principle & verification of Thevenin’s & Norton’s Theorem based on resistive circuit. Student can calculate & measure the value of current & voltage for different load circuits. Calculation of power consumed by the circuit. Facility for connecting external Power Supply. Set of required number of patch cords. Multi - colored test points are provided in the circuit to observe voltages at different points. Housed in an elegant powder coated metal cabinet. Strongly supported by a comprehensive instruction manual complete with theory and operating details. LED indication for supply “ON” to work on 220V AC Mains. Circuit protection through glass fuse)Complete set up as per Department incharge as per Department incharge 152 Supplying of Active filter set up(Product Specification Operating Temperature-0-50,Frequency (Hz) 50,Condition-New Temperature (deg. Celsius)-50,Usage/Application Industrial, Educational, Residential, Commercial) as per Department incharge 153 Supplying of A to D counter type complete set up (Product Description-M-32 AD M-16 AD,Input AD: 1/4 TRS jack and 25 pin D-sub, servo balanced, completely symmetrical audio path, Output AD: 4 x ADAT optical, 1 x MADI optical/coaxial,Dynamic Range AD: 113 dB RMS unweighted, 116 dBA,THD AD: < -110 dB (< 0.00032 %),THD+N AD: < -104 dB (< 0.00063 %) Crosstalk AD: > 130 dB,Input level for 0 dBFS: +24 dBu, +19 dBu, +13 dBu,Frequency response AD, -0.1 dB: 10 Hz - 23.2 kHz (sf 48 kHz),Frequency response AD, -0.5 dB: < 5 Hz - 45 kHz (sf 96 kHz) Frequency response AD, -1 dB: < 5 Hz - 80 kHz (sf 192 kHz) Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz, variable (Sync/WC),Jitter: Typical < 1 ns for internal, Word Clock, ADAT and MADI input Jitter sensitivity: all PLLs operate error-free even at 100 ns,Jitter suppression: > 30 dB (2.4 kHz),Power supply: Internal switching mode PS, 100V - 240V AC, 60 Watt Dimensions: (WxHxD) 483 x 88 x 200 mm)as per Department incharge 154 Supplying of Determination of Plancks constant(1. 1 0-2V D.C. at 20mA Variable Power Supply. 1.2 Digital Panel meter 3½ digits range 2mA. 1.3 Digital Panel meter 3½ digits range 2 volt 02 Lamp House: 100W Bulb with stand 03 Vacuum Type Photo Cell : Mounted in a Iron box. 04 Three different colour optical filters 05 Adequate no. of patch cords stackable 4mm spring loaded plug length 50cm. 06 Strongly supported by detailed Operating Instructions, giving details of Object, Theory, Design procedures, Report Suggestions and Book References.) as per Department incharge 155 Supplying of Determination of Energy Band Gap using Four Probe method(Product Specification:Type-Energy Band Gap Usage/Application-Laboratory,Connector-4mm Banana Socket Frequency-50Hz) as per Department incharge 156 Supplying of Determination of Hall coefficient and Hall angle in Hall-effect(Product Specification,Display Type-0-20V DC, 0-5 A, digit LED, Primary safety socket,4mm Electro Magnet Coils 500 T, Voltage resolution -0.1V,Current Resolution 0.1 A) as per Department incharge 157 Supplying of Determination of magnetic susceptibility using Guoys method(Usage/Application Physics Laboratory Type Of Instruments-Magnetic Susceptibility Gouys Balance Method Experiment Setup,Power-230V , 50Hz, +-10% Display Type-LED Type) as per Department incharge 158 Supplying of Study of absorption pattern of a given sample using FTIR spectrometer(Product Specification,Detector-High performance pyroelectric infrared detector,Weight-15 kg Software-1,Voltage-100-240V AC,Electronic System-24bit A/D converter at 500KHz, USB 2.0,Wavenumber Range-7800~350 cm-1Power-100-240V AC,50/60Hz,Signal Noise Ratio-30000:1 (resolution@4cm-1 , sample and background scan for 1 min@2100cm-1 ),Light source-Long life, steady state infrared emitter Beam splitter-coated KBr,Resolution-1 cm-1,Dimension-430mm x 360 x200) as per Department incharge 159 Supplying of LCD Projector and smart board (Product Specification,Projection Distance-<1 m Resolution-WXGA,Lamp Life-5000/9000/10000 HOURS Screen Size-100,Display Type-LCD,Dimensions-400X367X149MM Connectivity Type-Dual HDMI, HDMI,Brightness-2000-4000 Lumens Color-White) as per Department incharge 160 Supplying of Desktop(ntel Core I3/ 10th Gen/ 4GB RAM/ 1TB HDD/ DOS/ NO DVD/ 19.5 Inch Monitor/ 1 Year Warranty) as per Department incharge 161 Supplying of Printer(Product Specification,Printer Type-Ink Tank Color Output-Color,Print Speed-22 ppm,Paper Size-A4,Dimension-403 x 369 x 150 mm,Weight -6,Warranty-One Year or 50,000 pages which ever is earlier) as per Department incharge 162 Supplying of Printer (Product Specification Printer Type-Inkjet Color Output-Color | B&W,Print Speed-10,Paper Size-A4,Connectivity-USB,Dimension-377 x348 x179,Weight-3.9 Print Volume-any)as per Department incharge 163 Supplying of XEROX Machine (Product Specification,Functions-Photocopy,Supported Paper Size-A3,Supported OS-Windows 10 Color Output-Black & White,Number Of Trays-1,Item Color-Black & WhitePrint Speed-22 PPM,Weight-40 kg,Print Technology-Laser Input Tray Capacity-350 sheets,Warm-Up Time-5.6 Sec,Duty Cycle-80000 / Month,Resolution-600 x 600 dpi Connectivity-Ethernet & USB,Duplexing-Yes)as per Department incharge 164 Supplying of computer system with internet connection,PC Specifications to be followed :Processor Intel Core i5(10th Gereneration or newer ),RAM-8 GB or Higher HDD:512 GB,SSD,Monitor 24 LCD Monitor .OS:Windows 10 Professional ,Anti virus:User Licence for one year as per Department incharge 165 Supplying of Laptop (with Internet connection),Processor intel Core i5(11th Generation or newer),RAM 8 GB or higher HDD:512 GB,SSD Monitor 14 screen ,OS Windows 10 Professional ,Antivirus :User Licence for one year 166 Supplying of LCD Projector (Specification-Brightness:2000-4000 Lumens,Resolution-FULL HD 1080P,Connectivity Type-Dual HDMI, HDMI Display Type-DLP,Power Supply-100-240V Portable-Yes) as per Department incharge 167 Supplying of Smart Board (Frame Material-Aluminium Usage/Application-School, Education, etc,Effective Touch Area-72 x 48 inch Material-Ceramic Input Method-USB Power Consumption-150 - 220 W,Shape-Rectangular) as per Department incharge 168 Supplying of MS Suite Software(Specification-Microsoft Office Software,Operating System:For Windows,Brand:Microsoft )as per Department incharge 169 Supplying of Adobe Photoshop Software(Specification -Graphic Design and Photo editing,Licence-1 yea) as per Department incharge 170 Supplying of windows10 OS Software(Specification-License Duration-Life Time,Architecture-32/64 Bits,Operating System For WindowsAlso Provides,Windows Operating System,Provide Installation Service-Yes Support 24/7 (Live Rep)) as per Department incharge 171 Supplying of Laptop of 11th Generation intel core i3,1115G4 processor (6 MB Cache up to 4.1GHZ)windows 10 Home Single language English,intel UHD Graphics with shared graphics memory 8GB ,8 GBX1,DDR4,3200 MHZ,512 MB,2 PCLeNVMe Solid state drive pebble (Top colour is pebble colour,Base and palmrest are black colour as per department incharge 172 Supplying of Desktop of 10th Generation intel core i5-10500T (6 CORE,12MB Cache 2.3GHZ to 3.8GHz,35W ),Windows 10 Pro (64 Bit )English,intel integrated graphics),8GB ,1X8 GB,DDR4 non-EC0C Memory,2.5 inch TB 7200 RPM ,SATA Hatd disk drive 5480AJO 23.8 FHD 1920X10080 ips non touch,Antiglare camera,integrated graphics,Bronze 1505w PSU as per department incharge 173 Supplying of Printer (Specification:Item Weight-12 Kg,Package Dimensions-60 x 56.5 x 38 cm,Connectivity Type-Wi-Fi Operating System-Windows)as per department incharge 174 Supplying of Fumehood(Specification:Type-exhaust,LED-Tube fitting,Power-230 volt,Working Top-Granite ,MOC-GI with PU coated Storage includedas per department incharge 175 Supplying of electronic balance(Specification -Usage/Application-Laboratory,Accuracy-0.01%,Calibration-Fully Automatic,Type Of Weighing Scale-Digital,Voltage-110-220 V Mounting Type Desktop) as per department incharge 176 Supplying of Magnetic stirrer Magnetic stirrer Hot plate (Specification-Weight-2.3 kg,Timer -999 minutes,Temp. Accuracy-+-1 Deg.C(<100 Deg.C)+-3 Deg.C(<300 Deg.C),Dimensions LxWxH (mm)-230 x 180 x 120,Max.Temp. (Plate Surface) 300 Deg.C,Power supply-AC 220V / 50 Hz,Top Plate Size 135 x 135 mm,Display-LCD,Max. Volume (ml) 2000 ml,Speed (RPM)-1250 RPM Plate Material Steel per department incharge 177 Supplying of HOT Air oven of made inner material-stainless steel,Outer material -mild steel ,Surface treatement -Powered coated ,Sizes-Different sizes,Gravity conviction type-Double wall.Mechnical conviction -Triple wall as per department incharge 178 Supplying of colourimetry , Ery colour colorimeter industrial and research purpose stability( Product Specification:Material-Aluminium Alloy,Automation Type Automatic,Brand -DD-LAB ,Dimension-210 x 160 x 80 mm,Display Type-Dual Digital DisplayLight Source-Highly Accurate Laser Source,Stability- + 0.02 O.D. Per Hour Volume 1 ml. minimum,Filters layer-Built in 9 Digital filters 30,000 hours Life,Weight-1.5 Kg,Battery Backup-6 V Ni CD Re-chargeable Battery,Detector Silicon Photo-diode,Display Model Absorbance & Wavelength,Filter Wavelength 680 NM Country of Origin Made in India) as per department incharge 179 Supplying UV-Vis Spectrophotometer Fully touch screen portable UV Spectrophotometer shimadzu model name:UV 1900,Brand :shimadzu,Display =fully touch screen,Type-portable,size 450x501x244 as per department incharge 180 Supplying of potentiometer ,Range-0 to 1999.9mv,Resolution-1 mv,Repeatability -1mV,Accuracy +1 mv+ digit,Input impedency-10ohms,operating temperature 10 to 50 degree Celsius,Display 1/2 digit 0.5 seven segment LED Display indication,Power-230V+10,50hZ,Dimensions 76x275x170 mm,weihjt 2 kh as per department incharge 181 Supplying of Conductivity meter,LT 26 Deluxe conductivity meter,Product details:Model no-LT-26,Brand -Labtronics,Usage-Laborataty,Display type 3.5 Digit LEDas per department incharge 182 Supplying of Online COD/BOD Detector analyzer warer quality monitoring probe,Measure range-0-200/0-1000mg/l,Resolution -1 mg/l ,Accuracy +5%F.s ,Under pressure-1 bar,Power supply -12-24V DC ,Temperature range 0-45 degree ,Production leve;-IP68 as per department incharge 183 Supplying of melting point appratus,Temperature renge -2 degree above ,Readability 1 degree ,Display -3 Digit LED,Heating rate control-Electronic,Temperatre sensor PT-100as per department incharge 184 Supplying of Ph meter Labrtonics,Range:0-14pH,Resolution:0.01pH,Accuracy:0.01pH(Relative),Temp comp:Automatic wvith temp probe,Buffer:Manuals with keys as per department incharge 185 Supplying of Spectrum 3 FT-IR Spectrometer,Model no.-LI280127,Wave length -11000-30 cm-1 as per department incharge 186 Supplying of Stopwatch NIVIA 600 plastic(Product Specification:Color-Black,Usage/Application-Sports,Time Display 12/24 hour display for user option,Material-Plastic,Dial Shape-OvalMaximum Counting-23 hours 59 minutes 59 secondsas per department incharge 187 Supplying of Digital Bomb Calometer(Specification-Auto Off Automatic,Frequency-50 Hz,Voltage-230-280 V,Operating Time Per Test 10 minutes,Power Source Electric(Automatic) as per department incharge 188 Supplying of Microprocessor viscometer ,Product details: Measuring range-101x105mpa,,Spindles-4 Spildles,Rotor speed(rpm)-6/12/30/60 rotor speed rpm as per department incharge 189 Supplying of Flame photometer,Product details:Application-Laboratory use,industialuse,,weight 705kg ,Curve fit accuracy,Resolution-0.1ppm/meq as per department incharge 190 Supplying ofwater purification system,Resolution-18.2 M ohm cm at 25 degree C,Weight-19.5kg,Frequency-50-60Hz as per department incharge 191 Supplying of Refrigerator of 7.5kg fully Automatic Top Load washing machine (Hard water wash,Grey,5 star,10 years warranty as per department incharge 192 Supplying of water bath ,unstirred water bath s ,Digital info Water bathdigital,18L amb+5 tp 99 degree C includes clear lid and base trayas per department incharge 193 Supplying ofmini rotary shakers 50to 400RPM,features-220/230 V ac,Power supply-50-60Hzas per department incharge 194 Supplying of Magnetic stirrer- capacity 5 litre Spinit Digital Magnetic Stirrer Features-Type of Product-Magnetic stirreras per department incharge 195 Supplying of Digital ultrasonic cleaners (Specification: tank capacity 4 L, ultrasonic power 100W, Heating, Power-100W, time setting 1-99 min, heating temp up to 80 degree, in and out both in ss, with digital timer auto stop of sonication. 230V AC +-10% 50HZ. Tank size 300x150x100mm, overall size 330x180x240mm.supplied with basket and Lid.) as per department incharge 196 Supplying of Calomel electrode (Product Specification:Packaging Type-Box.,Length-120 mmUsage-Electrochemical Study(Laboratory))as per department incharge 197 Supplying of Pt-wire counter electrode (Product Specification Electrode Diameter-0.5 mm,Power Source-10A) as per department incharge 198 Supplying of UV-LAMP Cabinet(Product SpecificationSize/Dimension-15 X 12 X 10 (H) Light Source-3 NOS , SHORT WAVE -254nm-1no, LONG WAVE-365nm, VISIBLE LIGHT,Material-MILD STEEL,Voltage 230 V AC) as per department incharge 199 Supplying of Magnet (Magnet Grade-N48 Shape-Cup & Pot,Material Neodymium,Dimensional Tolerance+-0.05 mm,Plating / Coating-Ni-Cu-Ni Colour-red,Surface Gauss 3000 Gauss,Maximum Working Temperature (Deg. C)-230 Deg. C as per department incharge 200 Supplying of Micro Centrifuge tube(Specification: Usage/ApplicationLaboratory Analyzers,Material,Polypropylene Color-White,Pack Contains--20 Packet / carton & 500 pcs / packet,Shape-Conical,Length-4.1 cm,Inlet Diameter-1.3 cm Capacity2 ml)as per department incharge 201 Supplying of Micropiprtte(10-100uL),(Product Specification Capacity-10 ml,Volume Increment -0.1 microlitre Material-Glass,Autoclavable-Yes)as per department incharge 202 Supplying of Micropiprtte(10-1000uL),( Product Specification Material-Plastic,Capacity-Up to 1000ul,Color-Transparent Usage/application-Chemical Laboratory) as per department incharge 203 Supplying of printer-Black and white print ,scan,copy all in one printer Product Specification Print Speed-Up to 18ppm / 19ppmLaser Printer,Color Output-Black & White,Print Technology LaserjetUsage/Application-Printing,Supported Paper Size-A4 Compatible Operating Systems1,Windows 8,Windows 7,Windows Vista,Windows XP,Windows 2000,Mac OS X 10.4 - 10.8,Linux*3 Print Resolution-Up to 600 x 600DPI,1 200 (Equivalent) x 600DPI,Print Language-UFR II LT Dimension-372 x 371 x 254mm (With the Cassette Opened)Weight(W/O CRG)-7.6kg,Monthly Duty Cycle-8000 Pages Power Consumption 960W(Maximum),First Printout Time7.8s / 7.7s (A4 / LTR),Zoom 50 - 200% in 10% Increments Refill Type Toner Cartridge,Internal Memory 64 MB Printer Language UFR II LT (Host Based),Paper Weight 60 to 163g/m2 (Cassette),Copy Speed Up to 18 / 19Cpm (A4 / LTR) Halftones 256 levels,Copy Resolution 600 x 400 DPI Display 7 - Segment,1 - Digit LED as per department incharge 204 Supplying of printer-colour print ,scan,copy all in one printer (Specification :Functions-Print | Scan | Copy,Technology-Inkjet Color output-Color | B&W,Connectivity-Wireless(Wi-Fi) Usage-For Office ,Paper size-A4,Print speed upto 40 pages/min)as per department incharge 205 Supplying of photocopier branded fast print 50ppm high image resolution superior print quality,fast scan up to 50ppm A4 Monocolouras per department incharge 206 Supplying of LAN.Networking,cabling,switches,Wi-Fi points(10 points in each department) as per department incharge 207 Supplying of installation of Printer (Black and white),Printer( colour),Photocopier and LAN,Networking,Cabling,Switches,Wifi Points as per department incharge 208 Supplying of RS+ TT7519RS,RS75+ comes with 75 diagonal length with 3 GB RAM and 48 GB ROM,Slim Glare ,H7 touch surface hardness,Light weight for easy installation,Media suits for Annotation software Bundled with education apps,Office suits ,Great writing experience,Object recognition-First /palm /fine pen ,Touch points -20 points under andriod ,178 degree viewing angle ,IR Touch 15000 14-01-20241 contrast ratio as per department incharge 209 Supplying of Freightof RS+ TT7519RS,RS75+ comes with 75 diagonal length with 3 GB RAM and 48 GB ROM,Slim Glare ,H7 touch surface hardness,Light weight for easy installation,Media suits for Annotation software Bundled with education apps,Office suits ,Great writing experience,Object recognition-First /palm /fine pen ,Touch points -20 points under andriod ,178 degree viewing angle ,IR Touch 15000 14-01-20241 contrast ratio) as per department incharge 210 Supplying of wall mount (Dimension long:Telescopic Adjustable CCTV camera mounting bracket -Color: Beige Universal Camera Bracket, Heavyduty weatherproof iron bracket fits mostbrands of outdoor camera housing,Iron stand Platsic APPLICATION: Ideal for indoor outdoor dome cameras, Security Camera Mount Bracket, high quality with professional design,more stable and reliable.Hidden hole: Cable can feed thru L bracket tothe housing thus provide cable protection Outdoor and Indoor Use.)as per department incharge 211 Supplying of Camcorder Compact full HD ENG Camera with 20X zoom and 5 axis image stabilization. 20X optical zoom (26.8mm, F/1.8-576MM, F/2.;28.8MM, f/1.-576mm). 5 axis image stabilization. Support formats: full HD50P/60P, AVCHD/MP4;SD card slots 2 35mm film camera equivalent when dynamic IS is turned on with Tripod as per Department Incharge 212 Supplying of Video capture and video capture card (Product Specification:Converter type-USB,Material:Metal,Audio Jack:3.5 mm,HDMI Version:Hdmi-1.4,Audio:44100 AU,Video:Full HD Frame:48000 Resolutions)as per department incharge 213 Supplying of UPS(1KVa)(Product Specification: Type-Online UPS,Capacity-1 kVA,Configuration-1 Phase IN - 1 Phase OUT,Protection-OverVoltage,Form Factor-Tower Model Back Up Time-20- 30 Mins,Frequency-40 ~ 70 Hz (auto-sense) Usage/Application All) as per department incharge 214 Supplying of Studio light-125watt,5 LED BULBS consisting of 25watt bulb(Colour Temperature:5500 kelvin)as per department incharge 215 Supplying of Live streaming software for live streaming or live telecast as per department incharge 216 Supplying of Cables,installation,SSD Card(SAMSUNG VNAND SSD 850 EVO 2.5 250GB SATA III 3-D Vertical Internal Solid State Drive (SSD) MZ-75E250B/AM) as per department incharge 217 Supplying of complete making soundproof class(20*20 feet Room) as per department incharge 218 Supplying of RFID Tags RFID Book Lables(specification: Language ‏ : ‎ English,Simultaneous device usage ‏ : ‎ Unlimited Text-to-Speech ‏ : ‎ Enabled,Screen Reader ‏ : ‎ Supported Enhanced typesetting ‏ : ‎ Enabled,X-Ray ‏ : ‎ Not Enabled,Word Wise ‏ : ‎ Not Enabled) as per department incharge 219 Supplying of Anti theft stickers with the university logo(Polycarbonate 175 Microns Matt Finish) as per department incharge 220 Supplying of Middleware Application Desktop(writing and read tags) as per department incharge 221 Supplying of RFID Staff station or desktop reader (used for Tagging of books and circulation) operations through RFID as per department incharge 222 Supplying of Integration with software and Training of complete RFID System as per department incharge 223 Supplying of Data Encoding,Booking Tagging and Registration per book as per department incharge 224 Supplying of RFID Secuity Gates (2 pedestals - 1 gate),RFID Secuity Gate(Provide Installation Service-Yes,Support-24/7 (Live Reporting Language Support-English) as per department incharge 225 Supplying of Automated book drop box (ntegrated RFID Reader • Approx. 250 Books Receiving Cart (Movable) • Client Software for Checking-in Facility and communicating with LMS with provision for E-mail/SMS confirmation • Has automatic hutch which should open only on valid RFID tags and close once the book has been accepted to prevent the patrons from removing checked in books. • Communication with any LMS Software through SIP2/NCIP protocols • Compliant with internationally recognized standards for RFID based library self-services systems. • Book Drop can display item ID once item is returned. • Enabled with necessary items i.e.: Branded CPU etc. • 15” or higher LCD/LED Touch Screen Monitor. • Ethernet High Speed Receipt Printer (Reputed/Branded) • Customizable Design matching the library aesthetics; Contemporary and attractive. • Design is such that there is not damage to the dropped books. • Library Ethernet network and wireless network compliant. • Optional Features: Fingerprint Scanner, Smart Card Readers etc) as per department incharge 226 Supplying of 5KVA Invertor -online UPS with battery back up 100Mah battery (8 units)(Product Specification,Capacity-1100 Voltage-130V ,Rated Input Power-5 KVA,Display-Digital Type-Square Wave Inverter Country of Origin) as per department incharge 227 Supplying of LAN,Switches,Necessary cabling,casing,power supply port including cables as per department incharge 228 Supplying of Installation charges of RFID Tags,Anti-theft sticker,Middleware Application Desktop,RFID Staff statio,Integration of software,Data incoding books,RFID Secuirty Gates,Automated Book Drop Box,Cabling,Casing,Wiring,Switches,LAN as per department incharge 229 Supplying of Air conditioning 1.8Ton heavy duty AC (minimum 3 star rating,Coil material -copper,Power consumption-1950W,Power Requirement -AC 130-285V, 50Hz) as per department incharge 230 Supplying of Desktop,i5 processor ,7th Generation,500GB HDD,4GB RAM,23.8 INCH LED Backlit Monitor,Full HD IPS Panel(Brand-HP,Dell,Acer) as per department incharge 231 Supplying of Headphone with built in microphone,(Communication-Wired) as per department incharge 232 Supplying of 75 diagonal length with 3 GB RAM and 48 GB ROM ,Slim frame anti glare glass.3M Antiglare ,H7 Touch surface hardness,Light weight for easy installation as per department incharge 233 Supplying of Dedicated server-HPE Proliant DL 380,Gen 10 5218.2.3GHz 16core ,1P-32GB-R P408ianNC 8SFF 800WPS Server,Intel xeon G5218 Kit for DL 380,Gen 10 as per department incharge 234 Supplying of 5.5KVA Inverter with battery backup,Microtek inverter,online UPS ,65Mah battery(16 unit )-Exide as per department incharge 235 Supplying of Freight Transportation Charges of Desktop,Headphone,LAN Switches,4K-OPS,Dedicated server,5.5 KVA Inverter with battery back up and Air conditioner as per department incharge 236 Supplying of 86 Diagonal interactive display,3 GB RAM,48 GB ROM,4K Display Android model,Slim framenAnti glare Glass,H7 Touch Surface hardness ,Light weight for easy installation ,Media Suits for Annotation softwatr bundled with education Apps as per department incharge 237 Supplying of 4k OPS i5,7th Gen,8GB RAM,128 GB SSD as per department incharge 238 Supplying of play mounting including white board & Green board,Material post formed ply,Size 15ft(length)x7ft(ht) with green board for chalk,whiteboard for marker and cupboard as per department incharge 239 Supplying of UPS (1KVa,Phase-Single phase.Back up Time 10-20 min,Frequency-50Hz) as per department incharge 240 Supplying ofTraining and installation of 86 diagonal interactive display,4k-OPS,Play mounting including white board & Green board and UPS of 1KVA as per department incharge 241 Supplying of Digital Podium PTGN 500 Windows 8.1 LCD ,Electronic Lectern,On site OEM Warranty in 3 yearsas per department incharge 242 Supplying of PA System sound system with amplifier 350 watt ,30 watt speaker (4 nos) as per department incharge 243 Supplying of wireless mic Dual channel cordless microphone as per department incharge 244 Supplying ofTraining and installation of Digital Podium,86 Diagonal interactive display (4k display),4K-OPS,Play mounting including white board and green board,5KVA invertor,PA System and wireless mic as per department incharge 245 Supplying of Desktop :- 1).i5 Processor, 7th Generation, 500GB HDD, 4GB RAM, 2).23.8 inch. LED backlit Monitor Full HD IPS Panelas per Department Incharge 246 Supplying of 55 LED Display for CCTV Branded LED Display as per department incharge 247 Supplying of CCTV Camera IP based CCTV camera,2 TB Space with NVR with necessary accessories as per department incharge 248 Supplying of Stagmometer as per Department Incharge 249 Supplying ofViscometer as per Department Incharge 250 Supplying of Beaker-50ml as per Department Incharge 251 Supplying of Beaker-100ml as per Department Incharge 252 Supplying of Beaker-250ml as per Department Incharge 253 Supplying of Beaker-500ml as per Department Incharge 254 Supplying of Beaker-1000ml as per Department Incharge 255 Supplying of Buchner Funnel 3 as per Department Incharge 256 Supplying of Buchner Funnel 6as per Department Incharge 257 Supplying of Burette-50ml as per Department Incharge 258 Supplying of Chromatography column 1x18 with stop cock as per Department Incharge 259 Supplying of Conical flask-100ml as per Department Incharge 260 Supplying of Conical flask-250ml as per Department Incharge 261 Supplying of Conical flask-500ml as per Department Incharge 262 Supplying of Conical flask-1000ml as per Department Incharge 263 Supplying of Flat Bottomflask-500ml(Round) B-24 socket as per Department Incharge 264 Supplying of Round bottom flask-50ml Joint B-24 as per Department Incharge 265 Supplying of Round bottom flask-100ml Joint B-24 as per Department Incharge 266 Supplying of 3 neck RB flask B-29,B-19.as per Department Incharge 267 Supplying of Condenser Spiral B-24 and, B-19 as per Department Incharge 268 Supplying of Condenser Spiral B-24 and, B-24 as per Department Incharge 269 Supplying of T-type tube as per Department Incharge 270 Supplying of Rubber Cock No. 10 as per Department Incharge 271 Supplying of Specific Gravity hydrometer 800-1000 as per Department Incharge 272 Supplying of Specific Gravity hydrometer 100-1200 as per Department Incharge 273 Supplying of Universal hydrometer 1000-2000 as per Department Incharge 274 Supplying of Measuring Cylinder-10ml as per Department Incharge 275 Supplying of Measuring Cylinder-50ml as per Department Incharge 276 Supplying of Measuring Cylinder-100ml as per Department Incharge 277 Supplying of Measuring Cylinder-500ml as per Department Incharge 278 Supplying of Measuring Cylinder-1000ml as per Department Incharge 279 Supplying of Measuring Cylinder-2000ml as per Department Incharge 280 Supplying of Measuring flask-100ml as per Department Incharge 281 Supplying of Measuring flask-500ml as per Department Incharge 282 Supplying of Measuring flask-1000ml as per Department Incharge 283 Supplying of Pipette-0.5ml as per Department Incharge 284 Supplying of Pipette-2ml as per Department Incharge 285 Supplying of Pipette-5ml as per Department Incharge 286 Supplying of Pipette-10ml as per Department Incharge 287 Supplying of Pipette-25ml as per Department Incharge 288 Supplying of Separating Funnel-250ml B-24/B-24 as per Department Incharge 289 Supplying of Spatula Flat Spoon 6as per Department Incharge 290 Supplying of Spatula Flat Spoon 5as per Department Incharge 291 Supplying of Stop Cork 2wayas per Department Incharge 292 Supplying of Silica crucible-15ml without Lid as per Department Incharge 293 Supplying of Silica crucible-25ml without Lid as per Department Incharge 294 Supplying of Stalagmometer Straight Graduated as per Department Incharge 295 Supplying of Chemical thermometer 10c-110c as per Department Incharge 296 Supplying of Chemical thermometer 0c-250c as per Department Incharge 297 Supplying of Tiration flask-100ml as per Department Incharge 298 Supplying of Tiration flask-250ml as per Department Incharge 299 Supplying of Tongs crucible S.S.8 as per Department Incharge 300 Supplying of Test tube holder as per Department Incharge 301 Supplying of Filter Flask-500ml as per Department Incharge 302 Supplying of Filter Flask-1000ml as per Department Incharge 303 Supplying of Watch glass 3 as per Department Incharge 304 Supplying of Watch glass 4 as per Department Incharge 305 Supplying of Watch glass 6 as per Department Incharge 306 Supplying of Wire gauge150x150mm as per Department Incharge 307 Supplying of Tripod stand 8 as per Department Incharge 308 Supplying of boiling Test tube 1x8as per Department Incharge 309 Supplying of boiling Test tube 2x8as per Department Incharge 310 Supplying of Reagent Stickers 2x1 as per Department Incharge 311 Supplying of Ordinary Filter paper as per Department Incharge 312 Supplying of Reagent bottles-250mlas per Department Incharge 313 Supplying of Rubber cork as per Department Incharge 314 Supplying of Rubber tube 6mm as per Department Incharge 315 Supplying of Solid Reagent bottle-125mlas per Department Incharge 316 Supplying of Stopwatch plastic body as per Department Incharge 317 Supplying of Test tube stand 12 holes as per Department Incharge 318 Supplying of Thermometer 360 as per Department Incharge 319 Supplying of Test Tube 6mmx15cmas per Department Incharge 320 Supplying of Test Tube 10mmx10cm as per Department Incharge 321 Supplying of China dish 3 as per Department Incharge 322 Supplying of China dish 4 as per Department Incharge 323 Supplying of Brushes for Test Tube as per Department Incharge 324 Supplying of Brushes for Burette as per Department Incharge 325 Supplying of Brushes for Conical flask as per Department Incharge 326 Supplying of LPG gas burner as per Department Incharge 327 Supplying of Condenser Coil 12 as per Department Incharge 328 Supplying of Receiving adopter with vacuum outlet as per Department Incharge 329 Supplying of Plastic Wash bottle-500mlas per Department Incharge 330 Supplying of Pastel and Mortar 3 as per Department Incharge 331 Supplying of Pastel and Mortar 4 as per Department Incharge 332 Supplying of Pastel and Mortar 6 as per Department Incharge 333 Supplying of China Clay 2 as per Department Incharge 334 Supplying of China Clay 3 as per Department Incharge 335 Supplying of China Clay 4 as per Department Incharge 336 Supplying of Petri Dish 3(Borosil) as per Department Incharge 337 Supplying of Petri Dish 4(Borosil) as per Department Incharge 338 Supplying of Distillation Set-Complete flask-500ml as per Department Incharge 339 Supplying of Distillation Set-Complete flask-1000ml as per Department Incharge 340 Supplying of Thermometer Pocket B-14 as per Department Incharge 341 Supplying of Sintered Glass Funnel-25ml as per Department Incharge 342 Supplying of Air Condenser 12 as per Department Incharge 343 Supplying of Burette Stand with Clamp as per Department Incharge 344 Supplying of Cork borer as per Department Incharge 345 Supplying of Capillary Tube for melting point as per Department Incharge 346 Supplying of Dessicators 6 as per Department Incharge 347 Supplying of Dessicators 8 as per Department Incharge 348 Supplying of Dropper with Rubber teats 6 as per Department Incharge 349 Supplying of Dropper 4(Borosilicate glass) as per Department Incharge 350 Supplying of Dropping bottle-125ml as per Department Incharge 351 Supplying of Funnel Stand as per Department Incharge 352 Supplying of Fusion Tubeas per Department Incharge 353 Supplying of Glass Rod as per Department Incharge 354 Supplying of Glass Tube as per Department Incharge 355 Supplying of Stopwatch Steel body as per Department Incharge 356 Supplying of Magnetic Stirrer as per Department Incharge 357 Supplying of Rubber Gloves as per Department Incharge 358 Supplying of Reagent as per Department Incharge 359 Supplying of Sandbath as per Department Incharge 360 Supplying of Tissue Paper(Local made) as per Department Incharge 361 Supplying of Double Beam PC Microprocessor UV-VIS Spectrophotomet erMake:Systroni cs Model: 2202 PC Based Double Beam Automatic source optimization ,Base line calibration & Cell optimization 200 - 1100 nm Range2. 0 nm Bandwidth%T. Abs. Conc . (K factor. Multi standard ). Multi component measuring modesSingle Wave length, Multi Wave length Scan (with multi scan facility). Time Scan. Kinetic scan operating modes Automatic 5 position sample changer Single Position 50 /100 mm Cuvette Holder (Optional) as per Department incharge 362 Supplying of Refrigerated Centrifuge,(Specification:Speed:- 20000 Max.,RCF:- 37570 Max.,Lowest Temp:- -8,Noise:- <-60db)as per Department incharge 363 Supplying of Refrigerated Centrifuge Essential accessories Required:. With angle Heads (with polypropylene tubes)Model- R-248M 24xl.5 ml as per Department incharge 364 Supplying of Refrigerated Centrifuge 2. Voltage stabilizer:- 03 KW Servo controlled Voltage Stabilizer, input 170 volts to 260 volts, output 220 volts to 240volts as per Department incharge 365 Supplying of PCR machine(Specification- Well block, Gradient, temp. range 4° - 99-irC, memory capacity 10000 protocols , display 7inch,volume capacity I 0- 100 μL , preloaded protocol, temperature accuracy ±0.2°C@99°C, with PCR wizard as per Department incharge 366 Supplying of SOS PAGE unit and Western Blot apparatus along with power bank -Mini-TBC electroph_oretic transfer cell, includes: Mini 01P-4 cell tank and lid with cables, buffer, Mini transfer module, gel holder cassettes, 4 fiber pads, cooling units, instructions, Western blot unit, compatible power bank as per Department incharge 367 Supplying of pH Meter With electrode(Type of PH Mater - Portable,Ph Range:0-14,Resolution-0.01pH,compensation-0 to 80 degree celsius) as per Department incharge 368 Supplying of Deep fridge(It is used to store chemicals and preserve samples at very low sub-zero temperatures or below)as per Department incharge 369 Supplying of Autoclave (Vertical)Size- 400 x 600mm ,;Capacity- 75Ltr as per Department incharge 370 Supplying of Hot air oven (Sterilization) as per Department incharge 371 Supplying of Incubator Shaker-Growth and enumeration of microbes (Broth cultures) as per Department incharge 372 Supplying of Horizontal Laminar air flow(Sterile environment Size 4X2)as per Department incharge 373 Supplying of Horizontal Agarose gel electrophoresis unit with gel caster and Power pack Separation of macromoleculeas per Department incharge 374 Supplying of Vortex mixture-To mix content of test tubes and microfuge tubes. as per Department incharge 375 Supplying of Ultrapure Water Purification System:MiliQ Water For distill wateras per Department incharge 376 Supplying of Micropipets - 0.1μL-2.5μL 0.5μL-10.0μL 10.0μL-l00μL 20.0μL-200μL l00μL-l000μL as per Department incharge 377 Supplying of Quebec Colony Counter -Count the microbial colonies as per Department incharge 378 Supplying of Light Microscope (General) 10X,20x, 45x, l00x Visualize microorganisms as per Department incharge 379 Supplying of Bifocal microscope with illuminators, Camera attachment and computer Visualize microorganisms and microgrphy as per Department incharge 380 Supplying of Magnetic stirwith Hotplate and magnetic beads To stir the liquids , preparation of solution as per Department incharge 381 Supplying of Heating mantle For heating round bottomed flask/distillation flask as per Department incharge 382 Supplying of Microwave oven To heat liquids instead of flaming. Samsung/ LG 20 Ltrs as per Department incharge 383 Supplying of Glass Dessicators Used for dessication as per Department incharge 384 Supplying of Fluorescence microscope A fluorescence microscope is an optical Microscope that uses fluorescence and phosphore scence instead of,or in addition to, reflection and absorption to study properties of organic or inorganic substances as per Department incharge 385 Supplying of Electronic Analytical Balance It is used to weigh small quantities of chemicals and samples precisely and quickly. Readability- 1 mg (0.001 g) Cap.- 420gm as per Department incharge 386 Supplying of Electronic Top pan Balance- Readability- 0.1 g Cap.- 2 kg.as per Department incharge 387 Supplying of Double Distillation Unit ,.Approx output: 2 Lit/hrs Wattage:3.3 .KW With safety Cutoff Device Water Stills are carefully designed to produce high purity pyrogen free distiiied water. The water still comprises ofborosilicates glass horizontal typeboiler, coil condenser, constant level device, silica sheathed heaters, along with stand and clamps. All parts are replaceable. pH/conductivity:6-7 / 1-2 μSiem forsingle, 6-7/0.8-lμS/cm for double distilled water as per department incharge 388 Supplying of Microtome-5286(Product Specification Minimum Setting Value-0.5 um,Object Feed-28 mm,Vertical Stroke-60 mm,Specimen Orientation X and Y Axis Universal 8 Degree Trimming Thickness Range-1 um-100 um Operation-Automatic. (Motorized Feed & sectioning and Emergency Stop Provided),Sectioning Speed-0-400 mm/sec.,Specimen-Orientation Z Axis-Upto 360 Degree,Retraction Value-Adjustable Max Specimen Size-50 x 50 mm,Section Thickness Range-0.5 um-60 um)Senior rotary microtome as per Department incharge 389 Supplying of Cryostat -(Product Specification Section Thickness Range-0.5 Micron to 100 Micron (with the increment of 0.5 Micron, 1 Micron, 2 Micron, 5 Micron) Power Supply-220v,Dimension-750mm x 750mm x 950mm (approx) Weight -123 kg (approx),Remote Control-Optional,Sectioning Mode-Single step mode/ Continuous mode Hand Wheel Control-Feather Touch Keypad/ Foot Switch/ Remote Control (optional),Sterilization-U.V-C Sterilization,Cooling down time Up to -30 DegreeC-2 Hour 30 Min Specimen Retraction setting Range-5 Micron to 100 Micron (with increment of 5 Micron),Compressor-Dual Compressor,Cryo Chamber Temp. Adjustable -1 DegreeC to -30 DegreeC Block Holder Head Temperature-Adjustable -1 DegreeC to -35 DegreeC Illumination-LED Lamp)Ultimate usico fully automatic cryostat as per Department incharge 390 Supplying of ELISA -Vet scientific(Specification-Product Specification Automation-Semi Automatic,Assays Performed-ELISAs, Immuno Assays Plate Format-96 well,Optical System Filter-based Detection Method-Absorbance,Number Of User Programs 42 Storage-100000 Results,Filter Positions-8 Display Type-Touch Screen Packaging Type-EXPORT QUALITY,Testing Speed-3 second Type Of Filter 405,450,492, 630,Power Source-115/230 V AC, 50Hz,Weight-9 Kg,Is It Portable-Non Portable, sample Type-Serum, Plasma, Urine, CSF, Whole Blood,sample Volume Range-10-100 Interface-RS232/ USB) as per Department incharge 391 Supplying of Calorimeter -A VI Digital (A VI Scientific,Frequrcy:50Hz,Voltage:230-280V,operating time per test-10 min) as per Department incharge 392 Supplying of HaemometerSahli type-Microsidd (Specification:Amber coloured glass bottle -1 No.,Glass Stirrer-1 No.,Dropper with teat -1 No.,Cleaning Brush -1 No.,Spare latex tubing one meter -1 No.Round tube haemoglobinometer) as per Department incharge 393 Supplying of Anti - theft Sticker with the University logo as per Department incharge 394 Supplying of Middleware Application Desktop(Write and Read Tags) as per Department incharge 395 Supplying of RFID Staff Station or desktop reader (Used for tagging of books and circulation {lssue/Return) operations through RFID) as per Department incharge 396 Supplying of Integration with Software and Training of Complete RFID System as per Department incharge 397 Supplying of RFIDSecurityGates (2 pedestals-1 gate) RFID Security Gate (Single Lane) as per Department incharge 398 Supplying of Automated Book drop Box as per Department incharge 399 Supplying ofCabling. Casing. Wiring , Switches as per Department incharge 400 Supplying of Freight Transportation of Miidle ware Application Desktop,RFID STAFF Station,Integration with software training,Automated Drop box ,Cabling,Casing,Wiring,Switches as per Department incharge 401 Supplying of LAN . Switches, Necessary Cabling, Casing , Power Supply port including cables as per Department incharge 402 Supplying of Dedicated serverGHZ 16 core 1P-32GB -RP408ia -NC8SFF800WPS Serverintel Xeon -G5218 Kit for DL 380 GEN-10-HPE 32GB 2RX4 PC-4 2933YR Smart kit ,HPE DL38x Gen 10-12 Gb SAS Expande,HPE DL 380Gen 10 Box 1/2 Cage Bkpin kit ,HPE 24TB SAS 12G 10K SFF SC 512eDS HDD .HPE 800 WFS Ht Plg LHPwr Sply kit,HPE 3 Year Fiundation care 24x7 DL 380 Gen 10 Serviceas per Department incharge 403 Supplying of RS 86+_TB619RS, 3GB RAM and 48 GB ROM,4K Display Android model,3 GB RAM And 48 GB ROM,slim frame,Anti Glare Glass,3M Anti glare H7 Anti touch surface hardness lightweight for easy installation,Media suits for Annotation,Software bundled with education apps,Office suits,Great writing experience,Object recognition -First pal,/Fine pen ,Touch Points-20 points under window and 10 points under android,178 degree viewing angle IR ,Touch 15000,1 contrast ratio,4 MS Response time 50000 hours life,Reduce clutter and bring efficiency for the faculty,Remote control,15 wattX2 speaker,Android 8.0,Newline cast,Display management,Newline broadcast including installation and Trainingas per Department incharge 404 Supplying of Deep Fridgeas(2 in 1 Converti Freezer & Cooler Corrosion Resistant Cooling Coil & PPGI for inner & outer body Heavy Duty Compressor & Tropicalised Design Approximately 14% Higher Net Capacity compared to competition Sleek Design with heavy duty performance) per Department Incharge 405 Supplying of Autoclave (Horizontal,Height X Dia: 450mm x 250mm Height x Dia: 18Inch x 10Inch,Capacity: 22 Ltr,Load: 2.0 KW) as per Department Incharge 406 Supplying of Autoclave (Vertical): size- 400x600mm, Capacity- 75Ltr as per Department Incharge 407 Supplying of Hot air oven(Standard double wall fabrication. Inner chamber made of highly polished stainless steel sheet. Exterior fabricated out of thick mild steel sheet duly finished in stove enamel off-white paint or paste mat finish colour combinations.Nichrome wire heating elements -provided on three sides attain quick and uniform heating in range of 50c to 250c + 1c controlled by capillary type thermostat.Inner Chamber Size 18x18x18 inch. made of Stainless Steel) : any Standard make as per Department Incharge 408 Supplying of Bacteriological incubator(Item Weight ‎10 kg Product Dimensions-30 x 30 x 30 cm; 10 Kilograms,Item model number-12X12,Item Height-30 Centimeters Item Width-30 Centimeters) as per Department Incharge 409 Supplying of Bacteriological shaking incubator as per Department Incharge 410 Supplying of BOD incubator as per Department Incharge 411 Supplying of Laminar air flow any Standard company as per Department Incharge 412 Supplying of Micropipettes with microtips :(1.0uL-10.0uL, 10.0uL-100uL, 100uL-1000uL, 20uL-200uL): A. Prime Variable Pipette, B. Fully Autoclaveable Variable Vol. Pipetteas per Department Incharge 413 Supplying of Colorimeters with cuvettes any Standard company as per Department Incharge 414 Supplying of Western Blot apparatus, as per Department Incharge 415 Supplying of Powerpack with wiresas per Department Incharge 416 Supplying of Homogeniser as per Department Incharge 417 Supplying of PCR machine Block Formats 96x0.2ml(A),54x0.5ml(B), 96x0.2ml +77x05ml©, 384well(D) Size(WxDxH,mm)-380x270x250 as per Department Incharge 418 Supplying of UV Transilluminator/UV chamber UV source: 365nm Wave Length Viewing area: 24x14cm Anti Slip rubber foot provided for base as per Department Incharge 419 Supplying of CO2 incubator as per Department Incharge 420 Supplying of pH meter and buffers: A.pH meter B. pH buffers as per Department Incharge 421 Supplying of Water bath (any Standard company ) as per Department Incharge 422 Supplying of Fume Hood: size- 3x3x2 wooden with Granite working area as per Department Incharge 423 Supplying of Soxlet apparatus with heating mantle and distillation set up as per Department Incharge 424 Supplying of Kjeldahl Apparatus as per Department Incharge 425 Supplying of Ultrapure Water Purification System: MiliQ water as per Department Incharge 426 Supplying of Quebee Colony Counter as per Department Incharge 427 Supplying of Light Microscope (general) 25x, 45x, 100x s as per Department Incharge 428 Supplying of Bifocal microscope with illuminators as per Department Incharge 429 Supplying of Magnetic stirrer with magnetic beads(any Standard company )as per Department Incharge 430 Supplying of Magnetic stirrer with hot plate (Remi) as per Department Incharge 431 Supplying of Heating mantleas per Department Incharge 432 Supplying of Microwave oven ((20Ltr) as per Department Incharge 433 Supplying of Glass Dessicators as per Department Incharge 434 Supplying of Computer : Core i9, 7th Gen. 20 LED Monitor, 4GB DDV, 1TB HDD, DV writer HP/Dell as per Department Incharge 435 Supplying of Culture room: Tissue culture Rack fitted with 16 tubes, 8 bulbs, 4UV & Timer as per Department Incharge 436 Supplying of Electronic Analytical Balance:- Readability- 1mg(0.001g) Cap.-420gm as per Department Incharge 437 Supplying of ElectronicTop-pan Balance:-Readability- 0.1g Cap- 2kgas per Department Incharge 438 Supplying of Electroporator:- as per Department Incharge 439 Supplying of Fermenter(7.5L)(any Standard company )as per Department Incharge 440 Supplying of Fluorescence Microscopeas per Department Incharge 441 Supplying of Hot air oven universalas per Department Incharge 442 Supplying of Distillation Unit as per Department Incharge 443 Supplying of Membrane filter assembly 5000 mlas per Department Incharge 444 Supplying of Fluorimeter as per Department Incharge 445 Supplying of Homogeniser: Remi model- RQT-127 A/D High speed homogenizer, with 1/8 HP Motor, Homogenizer Working Volume [H2O] 0.1-50ml (Dispersing shaft DS-160/5) WEIGHT 0.6KG Dimension[LxWxH] 46mmx55mmx230 operating environment 0-40degre, 85% rel. humidity as per Department Incharge 446 Supplying of ELISA reader and Microtitre plates: ELISA Wavelength range 400nm-800nm Accuracy- +-1% at 1.0OD, 450nm Dimension 450x350x197mm as per Department Incharge 447 Supplying of Liminar air flow : 4x2x2 feet, stainless steel as per Department Incharge 448 Supplying of Gel Documentationd system as per Department Incharge 449 Supplying of 5 KVA Inverter with Battery Backup. Microtek inverter, online UPS 65Mah Battery (16 units) -Exide as per Department Incharge 450 Supplying of 12V/26AH- Batteryas per Department Incharge 451 Supplying of Headphone with built in microphone (Brand) as per Department Incharge 452 Supplying of Furniture:- Computer Table & Chairs & Table- Chair for lab. Instructor and student (50 students per batch) as per Department Incharge 453 Supplying of Network:- LAN, Switches, Cabling, Casing Power Supply Port including Cables as per Department Incharge 454 Supplying of 5.5 KVA Inverter with Battery Backup. Microtek inverter, online UPS 65Mah Battery (16 units) -Exide as per Department Incharge 455 Supplying of RS86+ TT8619RS 3 GB RAM, 48 GB ROM 4K Display, Android Model Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0, Newline Cast, Display Managemen, Newline Broadcast Including Installation and Training. as per Department Incharge 456 Supplying ofpH meter(Digital) :- pH range: 0-14, Temperature Range: 0.0 to 100 C (Manual Compensation) as per Department Incharge 457 Supplying ofNoise Level meter:- Auto/Manual ranging from 30 to 130dB in 6 ranges as per Department Incharge 458 Supplying ofWater analysis Kit:- They include; alkalinity, chloride, hardness, iron, and sulphate as per Department Incharge 459 Supplying ofHigh volume sampler:- 1)PM-2.5- Designed to meet International Standards for High volume air Sampling of PM2.5 particulates. 2)PM-10-U.S EPA FRM Designed for the determination of suspended of PM-10 particulates concentrations. (RFPS-1287-063) 3)TSP- Designed to meet U.S EPA reference method for determination of total suspended particulates(TSP) concentration as perDepartment Incharge 460 Supplying ofSoil testing kit (mrinda parikshan kit) : Use for micro and macro nutrients as per Department Incharge 461 Supplying ofSeive plate with shaker : 5mm,1mm,2mm) as per Department Incharge 462 Supplying ofUV/Visible spectrophotometer:- Spectral bandwidth 1 nm (190 to1100nm , Lamp Type 20-W halogen lamp and deuterium lamp as per Department Incharge 463 Supplying ofAutoclave : 10-15 litre Steam Sterilizer as per Department Incharge 464 Supplying ofLaminar hood (Horizantal) : Horizontal air flow cabinet, filter air blow across the work zone in horizontal direction. This constant flow of air provides material and product protection as per Department Incharge 465 Supplying ofHot plate(pic):-Temperature range: 350 C as per Department Incharge 466 Supplying ofShakeer incubator Compact Bench top shaker with temperature control range from Ambient +50C to 600C. Tray dimension : 420x420 , Speed 50-350 rpm with accuracy of +/- 2rpm as per Department Incharge 467 Supplying ofMuffle Furnaces (15x125x250)cm: Temperature upto 35C to 1400C as per Department Incharge 468 Supplying of Analytical Balances:Capacity 220gram as per Department Incharge 469 Supplying ofDigester : 1) vessel size : Dia 39 mm (Aprox.); Volume 160ml 2)Temperature : upto 200degC as per Department Incharge 470 Supplying ofDouble distilled water plant: Model- Vertical:- Distlled Water Output Capacity-2.5 Litres/Hours, Distillate water quality as per Department Incharge 471 Supplying ofOven:- Dry ovens- 30 to 1000 litre capacity. as per Department Incharge 472 Supplying of B.O.D Incubator: Volume 68 Litre as per Department Incharge 473 Supplying ofMagnus Microscope:- Magnification 4x,10x,40x, and 100x as per Department Incharge 474 Supplying ofDesiccators:- Contain: Silica Gel dimension;12x12 in (30.5x30.5 cm),Material Glass as per Department Incharge 475 Supplying ofRichter scale hardness tester Portable Rockwell/brinell vickers Hardness Testing Instrument Mold metal hardness meter display:-parameter- HRC Display Type, Digital Model Name/Number- ATedigiHR, Accuracy- 0.1 HRC Dimensions of Machine base (approx.) 150x425 mm as per Department Incharge 476 Supplying ofProctor Penetrometer: Proctor Penetrometer- Complete with set of needle points Weight, 2 kg as per Department Incharge 477 Supplying ofGas Chromatography Retention time repeatability-< 0.008% or 0.0008 min Area rpeatability -<1% RSD, using 2ng tetradecane as per Department Incharge 478 Supplying of Atomic Absorption Spectrometry(AAS):- aa-7000 SERIES OF Atomic Absorption Spectrophotometers features high- sensitivity analysis as per Department Incharge 479 Supplying ofWavelength range; 400 to710nm Wavelength selection: 8 in-built gelatin filters: 430,470,490,520,540,580,600 and 710 nm Measurement ranges; 0-100%T, 0-1.50Abs, 0.1 to 1000 Concentration. Resolution: 1%T, 0.01Abs, 0.1 to 1 Concentration as per Department Incharge 480 Supplying of Laptops(of Specification:Processor Corei5,RAM:4GB,Hard drive:500GB ,Screen size:12 inch):as per Department Incharge 481 Supplying of Desktops: i7 3rd Gen, 1TB HDD, 4GB RAM, Windos 10, MS office, Graphics card as per Department Incharge 482 Supplying of Xerox Machine(Product Specification:Functions Multi-Function:Supported Paper Size-A3,Supported OS-all,Color Output-Black & White,Number Of Trays-4,Item Color-white and blue Print Speed-up to 35 ppm,Weight 129 kg,Print Technology-Laser Warm-Up Time, As fast as 11 seconds (black and white) Duty Cycle-WorkCentre 5335: Up to 150,000 pages / month Resolution-200 x 1200 dpi) as per Department Incharge 483 Supplying of Air Conditioning:-1.5 Ton heavy duty AC (mimimum 3 Star rating) as per Department Incharge 484 Supplying of Luminous Cruze 3.5KVA Inverter with RC 18000 Battery (4 Batteries) as per Department Incharge 485 Supplying of Projector(Special Feature-portable,Connectivity Technology,Bluetooth, Wi-Fi, USB, HDMI,Display resolution 1920 x 1080,Display Type-LED) as per Department Incharge 486 Supplying of Godrej Lecture Hall Furniture as per Department Incharge 487 Supplying of Electronic Podium(Speaker type-Tweeter,Auxillary,wireless,floor standing) as per Department Incharge 488 Supplying of Smart board (Screen size-11 inches,Connecting technology-Wifi,Multimedia)as per Department Incharge 489 Supplying of Black board( Melamine Writing Surface (Chalk), Paper Honeycomb Core, 6063-T6 Alloy Aluminium Frame & Virgin ABS CornersMelamine Writing Surface (Chalk), Paper Honeycomb Core, 6063-T6 Alloy Aluminium Frame & Virgin ABS Corners) as per Department Incharge 490 Supplying of Glassware rack as per Department Incharge 491 Supplying of installation of Air conditioner,Luminous Cruze,Projector,Lecture Hall Furniture,Electronic podium,Smart board and black board as per Department Incharge 492 Supplying of Inductively coupled Plasma - Optical Emission Spectrometer with CID detector technology for multi-element analysis of geological petrogical etc. samples in ppb level as per Department Incharge 493 Supplying of Suppressed ion analysis system for anion and cation analysis in water, wastewater, environmental samples and also upgradable to combustion for determination of corrosive halogens and sulfur in Petrochemicals, gaseous samples, solid samples, and complex samples as per Department Incharge 494 Supplying of CHNS/O for the analysis of Carbon, Hydrogen, Nitrogen, Sulfur and Carbon in organic matrices, soil, feed , plant samples, petroleum products, Coal, Coke, Biomass & Liquid Fuels as per Department Incharge 495 Supplying of Gas Analyzers for hydrocarbon and permanent gas analysis as per Department Incharge 496 Supplying of Benchotop XRD as per Department Incharge 497 Supplying of XRF Spectrometer as per Department Incharge 498 Supplying of Refrigereted Centifuge MakE-REMI, Model-C24 PLUS :- Max. Speed:20000, Max. RCF:3757, Max. Lowest Temp.:8, Noise:60db. Essential accessories Required: 01. Withangle Heads (with polypropulene tubes) Model-R-248M24x1.5ml 2)Voltage stabilizer:-03KW Servocontrolled Voltage Stabilizer, input 170volts to 260volts, output 220 to 240volts as per Department Incharge 499 Supplying of pH Meter compatible poer bank Make: REMI :- With eletrode as per Department Incharge 500 Supplying of Bench top Centrifuge Make: Tarson, : - SPINWIN MC-001 6 places Rotor for 1.5 ml tubeas per Department Incharge 501 Supplying of Deep Fridge: It is used to store chemicals and preserve samples at very low sub-zero tempertures or below as per Department Incharge 502 Supplying of Autoclave(Vertical) : size- 400x600mm capacity- 75Ltr as per Department Incharge 503 Supplying of Hot air oven : Sterilization as per Department Incharge 504 Supplying of Incubator Shaker: Growth and enumeration of microbes(Broth Cultures) as per Department Incharge 505 Supplying of Horizontal Laminar air flow:- Sterile environment size 4x2as per Department Incharge 506 Supplying of Ultrapure Water Purification System: MiliQ Water : for distil water as per Department Incharge 507 Supplying of Micropipets (Ependroff): 0.1uL-2.5uL, 0.5uL-10uL, 10.0uL-100uL, 100uL-1000uL each oo these 1pcs as per Department Incharge 508 Supplying of Light Microscope (general)10X, 20X, 45X, 100X, : Visualize microorganisms as per Department Incharge 509 Supplying of Bifocalcal Microscope with illuminators, Camera Attachment and comput: Visuallize microorganisms and micrography as per Department Incharge 510 Supplying of Magnetic stir with Hotplate and magnetic bead as per Department Incharge 511 Supplying of Heatingmant; for heatinground bottomed flask/distillation flask as per Department Incharge 512 Supplying of Microwave oven: To heat liquids instead of flaming. 20Ltrs as per Department Incharge 513 Supplying of kydroPro 100 handeld multiparameter water quality analiser: Turbedityas per Department Incharge 514 Supplying of Petrological Microscope: Study of Optical minrology as per Department Incharge 515 Supplying of Ore petrological microscope: Study of ore petrology as per Department Incharge 516 Supplying of Miscellaneous instruments as per Department Incharge 517 Supplying of glassware as per Department Incharge 518 Supplying of chemical as per Department Incharge 519 Supplying of Arc GIS(Latest) as per Department Incharge 520 Supplying of GCD Toolkits as per Department Incharge 521 Supplying of SURPAC Software as per Department Incharge 522 Supplying of Intergraph Edu Kit [GIS+RS] Version 2020 or latest(Software content as per list), 5 users for Erdas imagine Professional and 5 users for Geomedia professional Software as per Department Incharge 523 Supplying of Interactive Flat Panel as per Department Incharge 524 Supplying of 2 Virtual Class Room including capture, recording and streaming online, 1 Servers one per 05 classrooms per Department Incharge 525 Supplying of N-computing for smart classrooms including servers and clients as per Department Incharge 526 Supplying of Tagging of documents(books/hard-bound journals/CDs/technical films etc)in RFID Technology as per Department Incharge 527 Supplying of Sofwares, Server Machines, Air-Conditioning Systems,Xerox Machines, Lamination Machines, Binding Machines, Furniture/Furnishing, Computers, Printers etc as per Department Incharge 528 Supplying of Digital Podium, PTGN 500, Window & 1 LCD, Elecronic Lectern, on site OEM. Warranty 3years, 3GB RAM,4GB ROM as per Department Incharge 529 Supplying of Air Conditioning:-1.8 Ton heavy duty AC (mimimum 3 Star rating) as per Department Incharge 530 Supplying of Black/ White,Printer:- scan-copy all in printer- Branded as per Department Incharge 531 Supplying of CCTV set for floor: 55 LRD display for CCTV. CCTV Camera-1 P based CCTV camera 2TB space with NVR with necessary accessories as per Department Incharge 532 Supplying of 5KVA Inverter online UPS with battery backup 100Mah battery(8 units) as per Department Incharge 533 Supplying of Electrophoresis Apparatus as per Department Incharge 534 Supplying of Bacteriological Incubator as per Department Incharge 535 Supplying of Autoclave as per Department Incharge 536 Supplying of Centrifuge as per Department Incharge 537 Supplying of Rotar Head as per Department Incharge 538 Supplying of Rotar Head 25 as per Department Incharge 539 Supplying of Gel documentation system as per Department Incharge 540 Supplying of Spectrophotometers as per Department Incharge 541 Supplying of compoud Microscope as per Department Incharge 542 Supplying of Trinocular Microscope with camera as per Department Incharge 543 Supplying of Semi-Automated Microtonne as per Department Incharge 544 Supplying of DNA Sequencer as per Department Incharge 545 Supplying of Spectrophotometer as per Department Incharge 546 Supplying of Laminar air flow chamber as per Department Incharge 547 Supplying of Tissue culture rack as per Department Incharge 548 Supplying of PCR Apparatus as per Department Incharge 549 Supplying of Liquid nitrogen cylinder as per Department Incharge 550 Supplying of TLC apparatus kit as per Department Incharge 551 Supplying of TLC Visualizer/documentation as per Department Incharge 552 Supplying of HPLC System as per Department Incharge 553 Supplying of Scientific vortex mixer as per Department Incharge 554 Supplying of Soil Thermometer as per Department Incharge 555 Supplying of Scientific Digital Balance as per Department Incharge 556 Supplying Equipments for workshop,Seminar & Excrusion as per Department Incharge 557 Supplying Equipments for Non-Recurring(Research Equipment) as per Department Incharge 558 Supplying Equipments for Recurring(Chemical & Glassware) as per Department Incharge 559 Supplying of Furniture Bookshelves, Study Tables and Chairs for Readers as per Department Incharge 560 Supplying of Desktop i5 Processor, 7th Generations, 500GB HDD, 4GB RAM, 23.8 inch, LED backlit Monitor Full HD IPS Panel (Brand: HP/DELL) as per Department Incharge 561 Supplying of Headphone with built in microphoneas per Department Incharge 562 Supplying of Printer with scanner (Laser,Colour/B/W)as per Department Incharge 563 Supplying of Scanner(USB,25.2D x 36.8W x 4.3H Centimeters,Slide) as per Department Incharge 564 Supplying of Xerox Machine:- (,Platen cover & Toner, Resolution (DPI):1200 X 1200dpi, Duty Cycle:1.3 Sec) as per Department Incharge 565 Supplying of Lamination Machine(Paper size-A4,A3,FS,max laminating width-500mm,Laminating speed-1200mm)as per Department Incharge 566 Supplying of CCTV Camera(Full HD Picture,AI Powered Motion Detection,Infrared Night Vision; 360° Panorama,Talk Back Feature (2-Way Audio)Material Type: Plastic; Included Components: Camera, Power Adapter, Charging Cable, Wall Mounting Kit, User Manual; Specific Uses For Product: Surveillance) as per Department Incharge 567 Supplying of 75 inch diagonal length with 3 GB RAM, 48 GB ROM 4K Display, Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0 Newline Cast Display Management including wall mount and installation. as per Department Incharge 568 Supplying of RS75+ TT7519RS RS 75+ comes with 75 inch diagonal length with 3 GB RAM, 48 GB ROM 4K Display, Android Model Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0 Newline Cast Display Management. as per Department Incharge 569 Supplying of Wall Mount Kit(Material: SS,Max loading capacity-60 to 100kg) as per Department Incharge 570 Supplying of Live streaming software Software Software for Live Streaming or Live telecast as per Department Incharge 571 Supplying of 75 inch diagonal length with 3 GB RAM, 48 GB ROM 4K Display, Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0 Newline Cast Display Management including wall mount and installation. as per Department Incharge 572 Supplying of Frieght Transportation of 4K Display,Wall mount kit,Live Streaming software as per Department Incharge 573 Supplying of cctv solutions for Department with 20 cameras(Image Sensor Type-CMOS,Image Sensor Size-0.357 inch,Camera Image Sensing capacity (Picture Mode)-2MP,Resolution-Full HD (1920 x 1080 Pixel)-Day/Night Capable-Yes,IR illumination Range(mtr) 200 Type of Camera HousingDOME CAMERA,IP Camera Yes) as per Department Incharge 574 Supplying of installation and commisioning of CCTV and other computer equipment as per Department Incharge 575 Supplying of 55 Tv for seeing all cctv in HOD room as per Department Incharge 576 Supplying of8 PORT EPBX as per Department Incharge 577 Supplying ofTELEPHONE as per Department Incharge 578 Supplying ofWIRE as per Department Incharge 579 Supplying of CRON BOX as per Department Incharge 580 Supplying ofSWITCHES FOR PORTS as per Department Incharge 581 Supplying of Workststion Table, Chairs, Desktop, UPS as per Department Incharge 582 Supplying of LAN, Switches, Necessary Cabling, Casing Power Supply Port including Cables as per Department Incharge 583 Supplying of Refrigerator(Storage & Interior Description : | Cooling Type ; Frost Free | Display Type ; Thermostat | Shelf Material ; Toughened Glass | Compressor Type ; Reciprocatory)as per Department Incharge 584 Supplying of Microwave(Special Features: Quartz Heater - Concealed Heating. Safer Cooking, Stainless Steel Cavity - More Hygienic. More Durable, Child Lock - Ensures complete safety especially for homes with young children, Interior light)as per Department Incharge 585 Supplying of Washing Machine( Fully automatic 6 kg) as per Department Incharge 586 Supplying of Sewing Machine(Motorised)as per Department Incharge 587 Supplying of Weighting Machineas per Department Incharge 588 Supplying of Blood Pressure Monitor as per Department Incharge 589 Supplying of Oximeter as per Department Incharge 590 Supplying of Gluco Meter as per Department Incharge 591 Supplying of Test Tube & Breakers as per Department Incharge 592 Supplying of RO Water Purifier as per Department Incharge 593 Supplying of Microscope(Student) as per Department Incharge 594 Supplying of Crockery Set as per Department Incharge 595 Supplying of Cocking Utensils set as per Department Incharge 596 Supplying of Cutlery Set as per Department Incharge 597 Supplying of Sofa Set + Centre Table as per Department Incharge 598 Supplying of A.C (Split 2 Ton,3 Star,Twin invertor HD Compressor)as per Department Incharge 599 Supplying of Stabilizer(Automatic Voltage Stabilizer,37.4 x 27.1 x 19.8 Centimeters,5 kg 700 g)as per Department Incharge 600 Supplying of Inveter with battery(Capacity -100AH,Battery Type-Tubular Battery,Warranty-1 years,Protection From Short Circuit, Over Temperature, Battery Deep -Discharge,Backup Time 8 Hrs Backup- 1 FAN ,28 Light , 8 Hrs Backup - 1FAN ,1 Light Battery Condition-New) as per Department Incharge 601 Supplying of Desktop Computer with UPS and Computer Tableas per Department Incharge 602 Supplying of Original operating system software window 10 with Antivirus as per Department Incharge 603 Supplying of Printer with scanner (inkjet,Colour/B/W)as per Department Incharge 604 Supplying of Dining Table Set as per Department Incharge 605 Supplying of Camera as per Department Incharge 606 Supplying of Mixer Grinder as per Department Incharge 607 Supplying of Iron as per Department Incharge 608 Supplying of Wall Clockas per Department Incharge 609 Supplying of Whole tailoring Equipments (Local) as per Department Incharge 610 Supplying of Knitting Equipments(Local) as per Department Incharge 611 Supplying of Flower Arrangement Equipments) (local) as per Department Incharge 612 Supplying of Aluminium Set as per Department Incharge 613 Supplying of Plastic Tub as per Department Incharge 614 Supplying of Dustbin(Big) as per Department Incharge 615 Supplying of Basket &Mug as per Department Incharge 616 Supplying of White Table Cloth(Big size)as per Department Incharge 617 Supplying of Wash Basin(Local)as per Department Incharge 618 Supplying of Gas Stove +Cylinderas per Department Incharge 619 Supplying of Curtains(Local) as per Department Incharge 620 Supplying of Floor Mats (Local) as per Department Incharge 621 Supplying of Tube Lightas per Department Incharge 622 Supplying of Fan as per Department Incharge 623 Supplying of Led Projector(New Edition)as per Department Incharge 624 Supplying of Smart Board(specification:white,power consumption<150w ,usage-school,Effective touch-65x46) as per Department Incharge 625 Supplying of Decorative Items(Local) as per Department Incharge 626 Supplying of Xerox Machine (Specification-Functions:Print | Scan | Copy,Technology -Laser,Print speed-upto 60 pages/min,Paper size-A4,Connectivity-Wireless(Wi-Fi),Color output-Color | B&W, Print Volume(per month) -above 15000 ppm,Features-Two-sided printing,Weight-25kg,Dimension-451 x 460 x 360mm,Scanner type Flatbed scanner multi as per Department Incharge 627 Supplying of Ceiling Fanas per Department Incharge 628 Supplying of Exhaust Fan as per Department Incharge 629 Supplying of Pedestal Fan as per Department Incharge 630 Supplying of Inveter with battery(Capacity -200AH,Battery Type-Tubular Battery,Warranty-3 years,Protection From Short Circuit, Over Temperature, Battery Deep -Discharge,Backup Time 14 Hrs Backup- 4 FAN , 8 Light , 14 Hrs Backup - 1FAN ,1 Light Battery Condition-New) as per Department Incharge 631 Supplying of Wooden Stool(Local) as per Department Incharge 632 Supplying of Wash Basin (Local) as per Department Incharge 633 Supplying of Register (Local) as per Department Incharge 634 Supplying of Stabilizer for ACas per Department Incharge 635 Supplying of Tubelightas per Department Incharge 636 Supplying of Dustbin (Local) as per Department Incharge 637 Supplying of Curtains (Window and Door) (Local)as per Department Incharge 638 Supplying of Door Mat(Local) as per Department Incharge 639 Supplying of Broadband(Wifi)as per Department Incharge 640 Supplying of Furniture Bookshelves, Study Tables and Chairs for attendant and students (30 students at a time) as per Department Incharge 641 Supplying of Wireless mic as per Department Incharge 642 Supplying of Weight Box(100g std.) :- Containing 10 cynlinders of the same size and shape but different in weight as per Department Incharge 643 Supplying of Weight Box(50g std.) :- Containing 10 cynlinders of the same size and shape but different in weight as per Department Incharge 644 Supplying of Kymograph :-with smoked paper, smoked Drum, Time marker as per Department Incharge 645 Supplying of Memory Drum :- Electrical operated as per Department Incharge 646 Supplying of Memory Drum :- Hand operated as per Department Incharge 647 Supplying of Metronome :- Mechanical as per Department Incharge 648 Supplying of Porteuz Maze Test as per Department Incharge 649 Supplying of Techisto-scope :- Fall Drop type as per Department Incharge 650 Supplying of Techisto-scope :-Electronic as per Department Incharge 651 Supplying of Verniers chronoscope :- Pendulum Type as per Department Incharge 652 Supplying of Ergograph/Smoke drum /smoke paper varshing tray and varnish :- Hand grip model as per Department Incharge 653 Supplying of Weight 6Kg as per Department Incharge 654 Supplying of Multiplication sheets(100sheet) as per Department Incharge 655 Supplying of Screen:- Wooden as per Department Incharge 656 Supplying of Ravens Progressive Matrices as per Department Incharge 657 Supplying of Weschlers Intelligence scale (Adult) as per Department Incharge 658 Supplying of Cattles 16 PF Questionnaire as per Department Incharge 659 Supplying of Jungs Word Association Test as per Department Incharge 660 Supplying of Thematics Apperception Test as per Department Incharge 661 Supplying of Zeigarnik Effect Test as per Department Incharge 662 Supplying of The Occupational Stress Index(OSI) Scale by A.K Shrivastawa and A.P. Singh as per Department Incharge 663 Supplying of Rorschach Test as per Department Incharge 664 Supplying of Coping Strategies Test by A.K. Shrivastava as per Department Incharge 665 Supplying of Job Satisfaction scale(JSS) by Amar Singh and T.R. Sharma as per Department Incharge 666 Supplying of Job Involvement Scale by A.K. Singh and R. Kapoor as per Department Incharge. 667 Supplying ofOrganizational Climate Scale by Somnath Chatopadhya and K.G. Agarwal as per Department Incharge 668 Supplying of Managerial Aptitude Scale(MAS) by Santosh Dhar, Upinder Dhar and Priyanka Sharma as per Department Incharge 669 Supplying of Employees Motivational Scale by A.K. Shrivastava as per Department Incharge 670 Supplying of Employees Mental Health Inventory (EMHI) by Jagdish as per Department Incharge 671 Supplying of Beck Depression Inventory by Arron Beck as per Department Incharge 672 Supplying of Aggration Scale (AS) by G.P. Mathur and Rajkumar Bhatnagar as per Department Incharge 673 Supplying of Ego Strength Scale by Q. Hassan as per Department Incharge 674 Supplying of Bells Adjustment Iventory by S.M. Mohsin and Shamshad as per Department Incharge 675 Supplying of Marital Adjustment Questionnaire by P. Kumar and kanchan Rohtagi as per Department Incharge 676 Supplying of Sacks Sentence Completion Test as per Department Incharge 677 Supplying of PGI Health Questionnaire N-1 (PGIHQN) by S.K. Verma, N.N. Wig and D. Prasad as per Department Incharge 678 Supplying of Rotters Locus of Control Scal by Anand Kumar and S.N Srivastava as per Department Incharge 679 Supplying of Self Concept Inventory by O.N Srivastava as per Department Incharge 680 Supplying of PGI Social Support Scale by S.K. Verma, P. Kulhara and Ritu Nehraas per Department Incharge 681 Supplying of Emotiobnal Maturity Scale(EMS) by R.R. Trtipathi as per Department Incharge 682 Supplying of Life satisfaction Scale(LSS) by Q.G. Alam and R. Srivastava as per Department Incharge 683 Supplying of PGI Quality of Life Scale by S.K Verma and A.C. Moudgil as per Department Incharge 684 Supplying of Environmental Awareness Scale (EAS) by Haseen Taj as per Department Incharge 685 Supplying of Jatota Test of Group Mental ability as per Department Incharge 686 Supplying of Weinsteins Noise Sensitivy Scale (WNSS)(Shore Samvedi Mapak) by P. Bhatia, S. Mohar and I.S Mohar as per Department Incharge 687 Supplying of State Traight Anxiety Test (STAT) as per Department Incharge 688 Supplying of Xerox Machines (Digital)(Product Specification:Copy | Print | Scan | Fax,Number Of Trays-2,Item Color-Black,Duty Cycle-20000,Print Technology-LaserPrint Speed-25 Paper Per Minute ) as per Department Incharge 689 Supplying of Binding Machine (Product Specification:Capacity-12-15 Sheets,Binding Style-Manual ,Max Binding Thickness<20 mm Max Binding Sheet Width 200-300 mm,Automatic Grade-Semi-Automatic,Weight-5.8Kgs Approx.,Dimension-375x230x150mm Approx.Automation Grade,Hole Size-3x8mm,Paper Size-A4 /Letter /A5 etc,Packaging Weight-375 mm,Handle Type-metal,Packaging Size-375x230x150mm Approx.Adjustable Margin-2.5/4.5/6.5mm,Usage/Application-Comb Binding Method Of Operation-Manual,No Of Punch Holes-21 holes Number Of Punch Slots-21 holes,Size-A4,Number Of Punch Holes-21 holes,Machine Dimension-375x230x150mm Approx.Is It Padded)as per Department Incharge 690 Supplying of Printers(Ink End Sensor-yes,paper storage capacity-100 sheets Paper Input, 50 sheets Paper Output-printing technology ink tank,connecter type-Wi-Fi, USB,special feature-Cost per print - 9 paise (Black & White), 33 paise (Colour) as per Department Incharge 691 Supplying of Furnishing (Book shelves:Study table and chair)as per Department Incharge 692 Supplying of Book Case(for Psychological Tests) as per Department Incharge 693 Supplying of Open Racks as per Department Incharge 694 Supplying of Inveter with battery(Capacity -150AH,Battery Type-Tubular Battery,Warranty-3 years,Protection From Short Circuit, Over Temperature, Battery Deep -Discharge,Backup Time 8 Hrs Backup- 2 FAN , 2 Light , 12 Hrs Backup - 1FAN ,1 Light Battery Condition-New) as per Department Incharge 695 Supplying of Inverter with Battery(Capacity-150,Battery Type-Tubular Battery,Warranty-3 years,Protection From Short Circuit Backup Time-5hrs,Battery Condition-New)as per Department Incharge 696 Supplying of Desktop(Product Specification:Hard Drive Capacity-320GB,Operating System-Window,Screen Size-17 inch Processor-i5,Display Type LCD Processor) as per Department Incharge 697 Supplying of Tally sofware (Multi User) as per Department Incharge 698 Supplying of Barcode Machine(Product Specification:Type-Thermal Printers,Max Printing Size-10 IPS,Resolution (dpi)-203dpi Model/Type-Citizen CLS-700,Automatic Grade-Fully Automatic Print Line-1~3 Lines) as per Department Incharge 699 Supplying of Server Machines(Product Specification:Memory-1x16 GB RAM/ Open Bay- 2.5 Hot Swap SAS/ SATA,Power Supply 220 V,Networking Type-LAN,Number Of Ports/Channels-8 USB Port-Yes Processor Speed Intel Xeon Silver 4114 (Deca Core) 2.2GHz Power Consumption 750 W) as per Department Incharge 700 Supplying of LAN connection between 7 computers as per Department Incharge 701 Supplying of Xerox Machine (Specification-Functions:Print | Scan | Copy,Technology -Laser,Print speed-upto 30 pages/min,Paper size-A4,Connectivity-Wireless(Wi-Fi),Color output-Color | B&W, Print Volume(per month) -above 10000 ppm,Features-Two-sided printing,Weight-16.8kg,Dimension-451 x 460 x 360mm,Scanner type Flatbed scannercannon image Class MF641CW multi as per Department Incharge 702 Supplying of Lamination Machine(Paper size-A4,A3,FS,max laminating width-330mm,Laminating speed-600mm)as per Department Incharge 703 Supplying of Binding Machine (Punches-43 holes,Hole distance-43 holes in A 11 SHEET,Binding sizes:Max 11) as per Department Incharge 704 Supplying of Computers (Processor -AMD Ryzen 3,RAM-8GB,HDD-512 GB,screen size-19.5 inches,Operating system:Windows 11 )as per Department Incharge 705 Supplying of Office Computer (Processor:i5 10th,HDD:1 TB,RAM-4 GB,GT730 4GB Graphics) as per Department Incharge 706 Supplying oflaser printer(Product Specification:Color Output-Black & White,Function-Print | Scan | Copy,Max. Print Speed (Black)-18 ppm Max. Print Speed (Color)-17 ppm,Connectivity-Ethernet,Paper Size-A4,Print Volume-Up to 500 pages/month) as per Department Incharge 707 Supplying of Smart class Board(Power consumption:220-300V,size/Dimension-65,Input type-finger Touch) per Department Incharge 708 Supplying of Double battery(capacity-250Ah,Over current protection) Inverter(Back up time-5 hrs) as per Department Incharge 709 Supplying of Desktop Computers :- HP 23.8-inch FHD All in One Desktop with Alexa Built-in(10th Gen Intel Core i3- 1005G1/8GB/512 GB SSD/Windows 10/MS Office 2019/Natural Silver), 24-dp0816in as per Department Incharge 710 Supplying of Printer, ScannerMulti-Function Direct Wireless Network Laser Printer (Print, copy, scan, Black) as per Department Incharge 711 Supplying of Networking (LAN, leased lines, wi-fi, switches etc.) TP-Link Archer C6 Gigabit MU-MIMO Wireless Router, Dual Band 1200Mbps Wi-Fi Speed, 5 Gigabit Ports, 4 External Antennas and 1 Internal Antenna WiFi Coverage with Access as per Department Incharge 712 Supplying of Back up support(UPS, Generator, Transformer):-600VA UPS for Desktop/PC/Computers(not for Routers) with Automatic Voltage Regulation as per Department Incharge 713 Supplying of Xerox Machine:- (IR2004 With Duplex, Platen cover & Toner, Resolution (DPI):600 X 600dpi, Duty Cycle:4.3 Sec) as per Department Incharge 714 Supplying of IBM SPSS(Statistics Package Latest Version) as per Department Incharge 715 Supplying of Nvovo(Package) as per Department Incharge 716 Supplying of LCD Projector:- 1)Project movies,images or data from your devices,most effective in dark settings 2)Projector, Lens Cover/Stand, Carrying Pounch, USB Cable 3) Connect via Wi-Fi to Android smartphones and tables or connect HDMI to iPhone or iPad as per Department Incharge 717 Supplying of Projector Screen:- 1)10 Feet x 6 Feet, 133 Dia, 16:9 Format, UHD-3D-4K 2)Comes with FULL HD 1080P 3D and 4K Viewing Technology, Anti UV coating as per Department Incharge 718 Supplying of DTH connection:- 1)HD Set Top Box 2)Recording facility as per Department Incharge 719 Supplying of Television Set:- 1) Smart LED TV-42 inches 2)4K UHD (Resolution:3840x2160) 3)Connectivity-Input:3*HDMI,3*USB 4)Audio:20W output 5) 4K HDR provides exceptional clarity 6)Smartphone connectivity : Photo sharing plus, screen mirroring as per Department Incharge 720 Supplying of as per Desktop:- Intel i7, 8th Gen, 4GB N-Vidia Geforce Graphics card, 16 GB RAM, Monitor, CPU, Mouse, key board partment Incharge 721 Supplying of Multifunction Laser Printer,Scanner, and Copier :- Functionality: Print, Scan,Copy Print Technology : Monochrome Laser Connectivity: Hi-speed USB, Compatible with USB 2.0 Specifications4as per Department Incharge 722 Supplying of Speaker 7.1 surround stereo(Power -100W,Play tme-11 hours,Voice Range-9m) as per Department Incharge 723 Supplying of Digital SLR Camera: 1)EOS full HD movie mode with movie service 2)18 megapixel CMOS)APS-(sensor 3)14-bit A/D conversion 4)ISO 100-12800)EXPANDABLE TO h:25600(5)Dual Lens camera 55-250mm IS II lens 6) Camera battery charger and bag 7)Wide strap USB cable, software CD. as per Department Incharge 724 Supplying of 24.2MP DigitalSLR Camera:- 1)100% Viewfinder Coverage 2)CMOS sensor with impressive high-resolution result 3)Camera battery, charger, and bag 4)Wide strap USB cable, software CD, manual as per Department Incharge 725 Supplying of Quark express as per Department Incharge 726 Supplying of Adobe Suite(CS6 Master Collection) as per Department Incharge 727 Supplying of Cool Edit Pro as per Department Incharge 728 Supplying of Turnitin as per Department Incharge 729 Supplying of Sound Forge as per Department Incharge 730 Supplying of 18-55mm normal lens as per Department Incharge 731 Supplying of 55-250mm Zoom lens as per Department Incharge 732 Supplying of 18-135mm lens as per Department Incharge 733 Supplying of 35mm prime lens as per Department Incharge 734 Supplying of 80mm macro lensas per Department Incharge 735 Supplying of Tripods as per Department Incharge 736 Supplying of DSLR:- 1)Powered by NP-F570 InfoLithium rechargeble battery pack 2)Records to MiniDV tape stock 3)16:9 widescreen recording 4)3CCD video camera 5)12x optical zoom lens 6)Records to MiniDV tape stock as per Department Incharge 737 Supplying of:- 1)3CCD video camera 2) Crystal Engine 3)Shoulder -Type Design 3)One Touch Navigation 4)Manual Focus Ring 5) 0 lux colour light view 6)10x optical zoom 6)500x digital zoom 7)Super image stabilizer 8) DV IN/OUT Terminal 8)5-mode programme AE: sports, portrait, low light, spot light, and surf &snow 9)SP/I.P recording 10)Back light compensation 11) Cinema mode )16:9 aspect ratio( 12)Infra-red remote controller as per Department Incharge 738 Supplying of Tripods:- 1)3-way head with adjustable pan 2)Steady rubberized legs 3)Multipurpose head with quick release 4)Multipupose head for DV cameras 5)Made from High Grade Aliminium Alloy 6)Quik flip leg locks 7)Fluid pan&tilt movement 8)Quik release plate& Bubble Level as per Department Incharge 739 Supplying of i-Mac(Product Specification,Storage Capacity-256 GB Display-24 inch,Memory Size-256gb ssd,assembled Product Dimensions L X W X H,461 mm x 547 mm x 130 mm, 4.48 kg Color-Silver & Blue,Graphics-8_core GPU,Video Support And Camera 4.5K,Bluetooth-Bluetooth 5.0,Weight-4.48kg,Operating System-macOS Big Sur,Processor- M1Echip,Line Voltage-100-240V AC) for Video Editing as per Department Incharge 740 Supplying of Photographic Design Flash Bender-Small Reflector:- 1) Make a bounce flash reflector, gobo, or snoot 2)Packs flat/great for travel 3)Attaches quickly & securely 4)Adjustable to fit all popular brands of accessory flash 5)For on-camera or off-camera flash as per Department Incharge 741 Supplying of Rim Collapsible softbox Diffuser with Rim :-1)Softbox 36 inches/90 Centimeters with Grey Rim and Bowens Mount, Portable and Quick Folding Softbox Diffuser for Photography Speedlites Flash Monolight 2)for 660 LED Panel-Outer 16.3x6.5 inches,Inner 9.8x8.7 inches Collapsible Light Reflector 3)with Stap Attachment and Carrying Bag for Photo Studio Portrait Video Shooting as per Department Incharge 742 Supplying of Handheld Camera Stabilizer with Quik Release for DSLR:- 1)Light weight, handheld video image stabilization 2)FlyCam 3000 video cam stabilizer accepts camera upto 3.5kg/7.7Ibs. 3)Easy attach a small LCD monitor with Flycam 3000 cam stabilizer when needed. 4)Precision Aluminum made 5)23 tall and just 207 Ibs without counter balance disc. as per Department Incharge 743 Supplying of Green/Blue matte screen )Chroma key( :- 1)8x12 ft Blackboard, perfect for television, video production and digital photography. 2)Rod pocket on each top edge allows to be draped or hung. 3)Finishing along all edges to prevent tears. 4)Made of 100 %pure cotton, good vertical sense and durable as per Department Incharge 744 Supplying of Professional Grade Backdrop Cum Light Stand of 8 Feet Height:- 1)Photography Backdrop Stand Kit. 2)Stand of 8 Feet Height 3)8x12 ft Blackboard, perfect for television, video production and digital photography. 4) Package Contents; 1Pcs White Backdrop , 1Pcs Black Backdrop and Set of Black Backdrop stand. 5)Bag to carry as per Department Incharge 745 Supplying of Video Mixer (Four Channel Digital Video Mixer With Effects, including installation and training):- 1) four channel video mixer by incorportating HDMI inputs/outputs, USB streaming, HDCP support, built-in touch multi-viewer, and audio embedding . 2)(3Input)SD HDMI/Composite +(1Input) Up to1080p HDMI/RGB/Component/Composite. 3) PGM Output) Up to 1080p HDMI + RGB/Component +Composite +(PVW Output)PVW/Multiviewer(. 4)480p/576p Progressive internal processing 5.) Built-in multi-viewer ith touch control 6). Built-in frame synchronizers on all inputs 7). Scalers on CH 4 and Output 8). 259 Transitions 148 Effects 9). HDCP Compliant 10) Audio Embedding 11) Audio Mixer & Delay -up to 4 Fframes 12) USB Streaming Out for web-streaming 13) Video Processing:4:2:2 )Y/b/Pr(8 bits)Internal Processing :480/59.94p when set to NTSC, 576/50p when set to PAL( 14) Input Formats :HDMIVideo: INPUT 1 to3 : reqyires 720x480/59.94p )when set to NTSC( 576/50p ) When set to PAL(15) Input Formats : HDMI and Component Video : INPUT 4:480/59.94p, 720/59.94p, 1080/59.94i, 1080/59.94p )when set to NTSC (576/50i, 576/50p, 720/50p, 1080/50i, 1080/50p )when set PAL( as per Department Incharge 746 Supplying of Studio Condenser Microphone :- 1)Professional, large-diaphragm condenser microphone for unsurpassed audio quality 2) Idea as Mian and support microphone for studio and live applications. 3) Cardioid pickup pattern for outstanding sound source separation and feedback rejection 4)Pressure-gradient transducer with shock-mounted capsule. 5)Ultra-low noise, transformerless FET inputeliminates low-frequency distortion. 6) LED indicates phantom power operation. 7)Swivel stand mount and transport case included. 8)Ultra-rugged construction with metal die-cast body 8)Gold-plated 3-pin XLR output connector for highest signal integrityas per Department Incharge 747 Supplying of Digital Monitor/Speaker System(in Pair) :- 1)Two-way active monitor system for multimedia workstations and keyboard monitoring 2)High-power woofers and tweeters powered provided a linear frequency response 3)optical and coaxial inputs to directly connect digital audio sources via S/PDIF interface 4)Two stereo analogue inputs featuring 1/8 TRS and stereo RCA connectors can be used simultaneously or mixed with a digital stereo source 5)Features 1/4 TRS headphone connector with auto-mute function easily accessible from the front panel 6)2x Stereo Anaog Inputs )TRS and Stereo RCA Connectors( 7) 1/4-inch TRS headphone connector with Auto-mute Loudspeaker Function 8)1/8-inch TRS and Stereo RCA connectors as per Department Incharge 748 Supplying of Lapel Clip-on Microphone for DSLRs Camcorders Video Cameras and Iphone Smart Phone :- 1)Omni directional lavalier microphone, designed for Smartphones, DSLR, Camcorders, Audio recorders PC etc, perfect for video use. 2) With Omni pickup pattern, for full 360A coverage, 3) minimum 6-meter )20(cable with 3.5mm 4-pole gold plug for smarty phone connection as per Department Incharge 749 Supplying of Micophone Stand:- Steel stands for hand held microphones in studio with a base supporting system as per Department Incharge 750 Supplying of MP3 Digital Voice IC Recorder LCD :- 1)Digital Voice IC Recorder 2)LCD Screen 3) 23hrs life with 4GB Memory as per Department Incharge
Contract Date: Jun 17, 2026 Contract Value : ₹ 78.07 Crore
Government Departments No of Bidders 9
Jharkhand View Result →
16.
Public Administrative Department #10171525 Price Bid
2025-2026 Annual Tender For Public Health Services - Miscellaneous Materials , Disaster Management - Supply Materials , Chain Saw Mechine , Motor Pump Set , Generator 1 Kw , Generator 3 Kw , Generator 5 Kw , Generator 10 Kw , Safety Harness Bult , Mask , Rain Coat , Gumboots , Gloves , Reflective Jacket , Safety Helmat , Disaster Management - Rent , Chain Saw Mechine , Motor Pump Set , Generator 1 Kw , Generator 3 Kw , Generator 5 Kw , Generator 10 Kw , Public Health - Push Chart Services , Push Chartwheel , Push Chart Rotator , Push Chart Push , Iron Plate 6 Kg , L Angle , Painting And Writing , Labour Charges , Public Health - Fogging Maching Services (Out Door) , Valve , Switch Board , New Silancer , Wire , Fule Tank , Tube , Comberser , Tab , Corpenter Materials And Services , Battery , Nri Valve , Public Health - Fogging Maching Services (In Door) , Valve , Tube , Burner , Coile , Service Charge , Public Health - Bathroom Door , Pvc Door , Steel Door , Em Solution And Abet , Emi Solotion , Abet , Mosquito Liquid Materials , Mosquito Liquid -Temephos , Malathion Technical Grade 95% , Pyrethrum , Fogging Gas Cylinder , Acid , Kalaikolli , Outdoor Fogging Machine , Indoor Fogging Machine , Basillus Thuringiensis , Alpha Cyper Methrin , Lambda Cyhalothrium , Megaric Sprayers , Public Health – Thalavadam Miscellaneous Materials , Manvetti , Kadaparai , Iron Pikas With 4 Finger , Kunthalam , Aruval With Handle , Ricemill Gi Bucket , Drainage Cleaning Gi Plate , Drainage Cleaning Agappai , Manvetti, Kunthalam,Pikashandle , Thagaramiron Chatti (Pond) , Moongil Koodai(Big) , Moongil Koodai(Small) , Kootumaru , Bamboo Stick Milar With Handle , Plastic Chatti , Hand Gloves , Gumboot , Rain Coat , Helmet , Mask , Euro Reflective Jacket , 12” Gi Bucket , Plastic Mug , Road Cleaning Brush , Aluminium Anna Koodai , Moongil Thattu , Shovel , Cottoncoat , Cotton Cap , Plastic Anna Koodai , 4 Wheel Pushcart Vehicle , 50 Lit Capacity Pushcartbucket , 200 Lit Capacity Wheeledpushcartbucket
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Tamil Nadu View Result →
17.
Educational and Research Institute #10088358 Price Bid
Supply Of Books , Library Books , Machine Design, T. V. Sundararajamoorthy & N. Shanmuga ,Anuradha Publications, Kumbakonam. , Revised Edition June-2003 , Industrial Motor Control., Stephen Herman ,Cengage Learning , 6Th Edition , Electrical Technology, Edward Hughes ,Addision– Wesley International Student Edition , Latest Edition , Mysql, Paul Dubois ,Addison Wesley , 4Th Edition , No Sql Distilled, Pramod J. Sadalage Martin Fowler ,Addison Wesley , 1St Edition Or Latest Reprint , American Society Of Metals – Hand Book – Volume 4 ( Forming), American Society Of Metals,American Society Of Metals , Latest Edition , Programmable Controller Theory And Implementation, L.A.Bryan E.A.Bryan ,An Industrial Text Company Publication , Latest Edition , Biomedical Instrumentation, M. Arumugam ,Anuradha Publications, Chennai , Latest Edition , Android Apps For Absolute Beginners, Jackson ,Apress , Latest Edition , Computer Installation And Servicing, D.Balasubramanian ,Arasan Ganesan Institute Of Technology , 1993 , Home Refrigeration And Air Conditioning, Audels, Theo. ,Audel & Co. Publisher, New York. - 1998 , 199 Edn.49 , Remote Sensing And Geographical Information System, M.Anji Reddy ,B.S Publications , Latest Edition , The Complete Pc Upgrade And Maintenance, Mark Minasi ,Bpb Publication , 1997 , Exploring Programmable Logic Controller With Applications, Pradeep Kumar Srivastava ,Bpb Publication , Latest Edition , The Complete Pc Upgrade And Maintenance, Mark Minasi ,Bpb Publication , Latest Edition , Advanced Mobile Repairing, Pandit Sanjib ,Bpb Publication , First Edition 2010 , Modern Vcd Video Cd Player Introduction, Servicing And Troubleshooting, Manohar Lotia & Pradeep Nair ,Bpb Publication , Latest Edition , Explosing Programmable Logic Controllers With Application., Pradeep Kumar Srivastava. ,Bpb Publication , Latest Edition , Let Us C, Yeswanth Kanetkar ,Bpb Publication , 16Th Edition , Programmable Logic Controller, Pradeep Kumar & Srivashtava ,Bpb Publication , Latest Edition , Modern Computer Hardware Course, Manahar Lotai, Pradeep Niar, Payal Lotia ,Bpb Publication , Second Revised Edition 2011 , Inside Autocad, D. Raker And H. Rice,Bpb Publication , Latest Edition , Text Book Of Environmental Science And Technology, M.Anji Reddi ,Bs Publications , Latest Edition , Book 1 - General Aspect Of Energy Management And Energy Audit,,Bureau Of Energy Efficiency, New Delhi , Second- 2005 , Book 3 - Energy Efficiency In Electrical Utilities,,Bureau Of Energy Efficiency, New Delhi , Second- 2005 , National Building Code Of India – 2005,,,Bureau Of Indian Standards, New Delhi , Latest Edition , Total Quality Management, Oakiand.J.S.,Butterworth Heinemann Ltd. Oxford , 1989 , The Art Of Electronics, Paul Horowitz ,Cambridge University , 2Nd Edition Press , Performance And Design Of Ac Machine, M.G.Say ,Cbs Publisher & Distributor , Latest Edition , A Text Book Of Soil Mechanics, Dr S B Sehgal ,Cbs Publisher & Distributors , Latest Edition , Building Repair And Maintenance Management, P.S.Gahlot ,Cbs Publisher & Distributors (P) Ltd , Latest Edition , Learning Material Development Project – Nitttr,,Cd Programme On Gps And Gis. , Latest Edition , Introduction To Programmable Logic Controllers, Gary Dunning ,Cengagelearning India Pvt Ltd , Latest Edition , Building Materials, S.C.Rangwala ,Charotar Publishing House , 1982 , Building Construction, S.C.Rangwala ,Charotar Publishing House , Latest Edition , Mechanics Of Structures (Vol Ii), S.B. Junnarkar ,Charotar Publishing House , 22Nd Edition , Highway Engineering, Rangwala ,Charotar Publishing House , 2010 , Railway Engineering, Rangwala ,Charotar Publishing House , 2010 , Bridge Engineering, Rangwala ,Charotar Publishing House , 2009 , Estimating & Costing, Rangawala ,Charotar Publishing House , Latest Edition , Construction Of Structures And Management Of Works, Rangwala.S.C ,Charotar Publishing House , Latest Edition , Machine Design, Pandya & Shah ,Charotar Publishing House , 1995 , Principle Of Geographical Information Systems For Land Resources Assessment, Burrough P.A. (2000) ,Clarendon Press, Oxford. , Latest Edition , Technician’S Guide To Programmable Logic Controllers, Richard A. Cox ,Delmer , Sixth Edition 2011 , Principles Of The Manufacturing Of Composite Materials , Suong V Hoa, ,Des Tech Publication. Inc , Latest Edition , Strength Of Materials, S.Ramamirtham ,Dhanpat Rai , 2003 , A Course In Electrical And Electronics Measurements And Instrumentation., A.K. Sawhney Puneet Sawhney ,Dhanpat Rai , Latest Edition , Estimating & Costing, L.N.Dutta ,Dhanpat Rai , Latest Edition , Thermal Engineering., B.K. Sarkar. ,Dhanpat Rai , 3Rd Edition , Internal Combustion Engines, M.L.Mathur & R.P.Sharma ,Dhanpat Rai , Latest Edition , Mechanical Draughtsmanship,G.L. Tamta, Dhanpat Rai ,Dhanpat Rai , Latest Edition , Engineering Drawing, D.N. Ghose ,Dhanpat Rai , Latest Edition , A Course In Electrical Power, Soni & Gupta ,Dhanpat Rai , Latest Edition , Hydraulics,Fluid Mechanics And Hydraulics Machines, S. Ramamirtham ,Dhanpat Rai , Latest Edition , Modern Electric Traction, H Partab ,Dhanpat Rai , Latest Edition , Mechanical Measurements, A.K.Sawhney-Dhanpat Rai & Sons ,Dhanpat Rai , Latest Edition , Electronic Measurements And Instrumentation, Sanjay Talbar & Akhilesh Upadhyaya ,Dhanpat Rai , 2004 , Electrical And Electronic Measurements And Instrumentation, A.K.Sawheney ,Dhanpat Rai , 1993 , A Coursein Electricalpower, Soni, Gupta ,Dhanpat Rai , Latest Edition , Strength Of Materials, S. Ramamrutham ,Dhanpat Rai , 15 Edn 2004 , Course In Electrical Machine Design, A.K.Sawhney ,Dhanpat Rai , Latest Edition , Electrical Technology, B.L.Theraja ,Division Of Nirja Constructions And Dev Co.(P) Ltd , 1994 , Design Data Book, Psg College Of Technology ,Dpv Printers, Coimbatore , Latest Edition , Suftware Testing Concepts And Tools, Nageshwara Rao Pusulri ,Dreamteach , First Edition , Automotive Mechanics, Joseph Heitner ,East West Press (P) Ltd, New Delhi , Latest Edition , Renewableenergy Sources , Twidell, J.W. And Weir, ,Efn Spon Ltd , Latest Edition , Vehicle And Engine Technology, Heinz Heisler ,Elbs , Latest Edition , Programmable Logic Controller, W. Bolton ,Elsevier India Pvt Ltd , Iv Edition , Principles And Practice Of Town And Country Planning, Lewis B. Keeble ,Estates Gazette, University Of Michigan , 2010 , A Text Book On Building Services, R.Udyakumar ,Eswar Press, Chennai , Latest Edition , Fluid Mechanics, K.L.Kumar ,Eurasia Publshing House - New Delhi , Latest Edition , A Text Book Of Machine Design., R.S. Khurmi & J.K.Gupta ,Eurosia Publishing House - New Delhi ,Edn. 18 , Mechanical Measureme Control, R.V. Jalgaonk ,Everes T Publishing House, Pune , Latest Edition , The Cell Phone Handbook, P.J. Stetz And Penelope Stetz ,Findtech Ltd , Second Edition , Pc Repair And Maintenance, Joel Rosenthal ,Fire Wall Media, New Delhi , First Edition 2007 Reprint :2012 , Software Engineering, Bharat Bhusan Agarwal, Sumit Prakash Tayal ,Fire Wall Media, New Delhi , Second Edition 2008 , The Laptop Repair Workbook: An Introduction To Troubleshooting And Repairing Laptop Computers, Morris Rosenthal ,Foner Books , First Edition 2008 , The Laptop Repair Workbook: An Introduction To Troubleshooting And Repairing Laptop Computers, Morris Rosenthal ,Foner Books , First Edition 2008 , Multimedia Technology & Applications,, David Hillman ,Galgotia Publications Pvt Ltd. , Latest Reprint , Repair And Seismic Strengthening Of Buildings - Guidelines, Is:13935 - 2002,,Guidelines, Is:13935 , 2002 , Automotive Mechanics, William H.Crouse And Donald .L. Anglin ,Hill Publishing Company Ltd, New Delhi , Latest Edition , Die Design Fundamentals, Paquin.J.R,,Industrial Press Inc , Latest Edition , Digital And Analog Communication System, B.P.Lathi .Zhi Ding ,International Oxford University Press , 4Th Edition , Mysql Bible, Steve Suehring ,John Wiley & Sons , 2002, Latest Reprint , Modern Production / Operations Management, E.S. Buffa And R.K. Sarin ,John Wiley & Sons , Latest Edition , Remote Sensing And Image Interpretation, Lillesand, T.M. & Kiefer R.W. (1998) ,John Wiley & Sons , Latest Edition , Ground Water Hydrology, David Keith Todd ,John Wiley & Sons , Latest Edition , Digital Communications, Simon Haykin ,John Wiley India Edition , Latest Edition , Cad/Cam, Mikell P.Groover ,Jr.Prentice Hall Of India Pvt., Ltd. , Latest Edition , A Course In Electrical Power, J.B. Gupta ,Kaison Publishing House , Reprint 2004 , Civil Estimating, Costing And Valuation,,Kalson Publishing House , Latest Edition , Machine Drawing, P.S. Gill ,Katsan Publishing House , Latest Edition , Analysis Of Structures – Vol 1, Vazirani & Ratwani ,Khanna Publishers , Latest Edition , Quantity Surveying & Valuation, N.A.Shaw ,Khanna Publishers , Latest Edition , Water Supply And Sanitary Engineering, S.K.Garg ,Khanna Publishers , Latest Edition , Hydrology And Water Resources Engineering, Santhosh Kumar Gar ,Khanna Publishers , Latest Edition , Fluid Mechanics, Prof. S. Nagarathinam - ,Khanna Publishers , Latest Edition , Workshop Technology ,Raghuwanshi,Khanna Publishers , Latest Edition , Production Technology,Nai Sarak ,Khanna Publishers ,Edn. Xii , Thermal Engineering, P.Lballaney ,Khanna Publishers , 24Th Edition , Production Technology, Jain & Gupta ,Khanna Publishers , Latest Edition , Automobile Engineering, G.B.S.Narang ,Khanna Publishers , Latest Edition , Thermal Engineering, P.L Ballaney,Khanna Publishers , 24Th Edition , Applied Thermodynamics, Domkundwar And C.Pkothandaraman ,Khanna Publishers ,2Nd Edition , Non Conventional Energy Sources, G.D. Rai,Khanna Publishers , 1999 , Industrial Engineering And Management, O.P. Khanna ,Khanna Publishers , Latest Edition , Refrigeration And Air Conditioning, P.L . Ballaney ,Khanna Publishers , Latest Edition , Electric Circuit Theory, Dr.M.Arumugam Dr.N.Premkumaran ,Khanna Publishers , Latest Edition , Electrical Power, S.L Uppal ,Khanna Publishers , Latest Edition , Electrical Wiring, Estimating And Costing, Dr.S.L.Uppal G.C. Garg ,Khanna Publishers , Sixth- 2011 , Electric Circuit Theory, M. Arumugam, N. Premkumaran ,Khanna Publishers , 1997 , Power Electronics, P.S.Bimbhra, ,Khanna Publishers , 5Th Edition 1994 , Integrated Circuits, K.R. Botkar ,Khanna Publishers , Latest Edition , Satellite Communication, D.C. Agarwal ,Khanna Publishers , Third Edition , A Monograph On Electronic S Design Principles,, N.C.Goyel, R.K.Khetan, ,Khanna Publishers , Second Edition , Operating Systems, Ekta Walia ,Khanna Publishers , 2Nd Edition , Data Structures, Rs Salaria ,Khanna Publishers , 2016 , Electric Power, Sl Uppal ,Khanna Publishers , Latest Edition , Testing, Commissioning, Operation And Maintenance Of Electrical Equipments, S.Rao ,Khanna Publishers , Sixth Edition, 2010 , Electrical Estimation And Costing, Surjit Singh ,Khanna Publishers , Latest Edition , Power Electronics, Dr.P.S.Bimbhra ,Khanna Publishers , Fourth Edition, 2011. , Mechanical & Indtrial Measuments, R.K.Jain ,Khanna Publishers , Latest Edition , Construction Management, Sanga Reddy. S ,Kumaran Publications, Coimbatore , Latest Edition , Fluid Mechanics, R.K. Bansal ,Lakshmi Publications , Latest Edition , Total Quality Management,, V.Jayakumar ,Lakshmi Publications. , (Reprint 2005) , Thermal Enggi., R.K . Rajput,Laxmi Publications Pvt Ltd , 8Th Edition , Fluid Mechanics And Hydraulic Machines, R. K. Bansal ,Laxmi Publications Pvt Ltd , Latest Edition , Engineering Mechanics, R K Bansa ,Laxmi Publications Pvt.Ltd. , Latest Edition , Building Construction, Dr. B.C. Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Building Construction, Ashokkumar Jain ,Laxmi Publications Pvt.Ltd. , Latest Edition , Surveying Volume I, Punmia.B.C. Ashok K.Jain & Arun K. Jain ,Laxmi Publications Pvt.Ltd. , 2011 , Theory Of Structures, B.C. Punmia, Ashok Jain & Arun Jain ,Laxmi Publications Pvt.Ltd. , 9Th Edition , Surveying Volume I, Punmia.B.C, Ashok K.Jain & Arun K. Jain ,Laxmi Publications Pvt.Ltd. , Latest Edition , Surveying Volume Ii & Iii, Punmia.B.C, Ashok Jain & Arun K. Jain ,Laxmi Publications Pvt.Ltd. , Latest Edition , Limit State Design Of Reinforced Concrete, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , R C C Designs, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Environmental Engineering, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Waste Water Engineering, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Soil Mechanics And Foundation Engineering, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Project Planning And Control With Pert And Cpm, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Buildingconstruction, Dr.B.C.Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Strength Of Materials, R.K. Bansal ,Laxmi Publications Pvt.Ltd. , 3Rd Edition, 2010. , Engineering Mechanics, R.K. Bansal ,Laxmi Publications Pvt.Ltd. , 2Nd Edition, 2007 , Thermal Engg, R.K .Rajput ,Laxmi Publications Pvt Ltd , 8Th Edition , Industrial Robotics – Technology, Programming And Applications, P.Groover ,Mc Graw Hill , 2001 , Mobile Cellular Communications, W.C.Y. Lee ,Mc Graw Hill , Second Edition , Electronic Principles And Applications, Charles.A.Schuler ,Mc Graw Hill , 3Rd Edition, 1989 , Geotechnical Earthquake Engineering Hand Book, Robert W.Day ,Mc Graw Hill , Latest Edition , Measurement Systems Application And Design, Ernest O. Doebelin ,Mc Graw Hill , 2004 , Transducers And Instrumentation, D.V.S.Murty ,Mc Graw Hill , 2004 , Digital Electronics, Roger L.Tokheim Macmillan ,Mc Graw Hill , Latest Edition , Digital Integrated Electronics, Taub & Schlling ,Mc Graw Hill , Latest Edition , Optical Fibre Communication, Gerd Keiser ,Mc Graw Hill , Third Edition , Digital Electronics, Roger L.Tokheim Macmillan ,Mc Graw Hill , 1994 , Computer Control Of Manufacturing Systems, Yoram Koren ,Mc Graw Hill , Latest Edition , Engineering Economics And Management, T.R. Banga & S.C. Sharma ,Mc Graw Hill , Editiion 2 – 2001 , Database System Concepts, Silberschatz A. And Korth H ,Mcgraw Hill Education (India) Pvt Limited , 6Th Edition , A Global Perspective, Heinz Weihrich, Harold Koontz ,Mcgraw Hill International Edition ,10Th Edition , Hessentials Of Management’, Herald Koontz And Heinz Weihrich ,Mcgraw Hill Publishing Company , Latest Edition , Power Electronics, Md Singh, Kb Dhanchandaniata ,Mcgraw Hill Publishing Company , Seventeenth Reprint 2005 , Operating Systems, A Concept-Based Approach, Dhananjay M. Dhamdhere ,Mcgraw Hill, Indian Edition , 3Rd Edition , Elements Of Photogrammetry, Wolf Paul (1998) ,Mcgraw Hill, New Delhi , Latest Edition , Manufacturing Process, Begeman . ,Mcgraw Hill, New Delhi1981. , 5Th Edition , Introduction To Environmental Engineering, Mackenzie, L. Davis And A. David, Cornwell. ,Mcgrawhill , Latest Edition , Environmental Engineering, Peary, Rowe And Tchobanoglous ,Mcgrawhill , Latest Edition , Fundamentals Of Digital Logic With Vhdl Design, Stephen Brown And Vranesic ,Mcgrawhill , Latest Edition , Programmable Logic Handbook: Pld, Cpld, And Fpga, Ashok K.Sharma ,Mcgraw-Hill , Latest Edition , Javascript: The Complete Reference, Powell, Thomas ,Mc-Grawhill , 3Rd Edition , Html & Css: The Complete Reference, Thomas Powell ,Mc-Grawhill , 5Th Edition , Jsp: The Complete Reference, Phil Hanna ,Mc-Grawhill , 2Nd Edition , Robotics For Engineers, Yoram Koren ,Mcgraw-Hill Book Co., , 1992 , “Basic Die Making, Eugene Ostergaard.D ,Mcgraw-Hill Book Company , Latest Edition , Advanced Die Making, Eugene Ostergaard.D ,Mcgraw-Hill Book Company , Latest Edition , Hand Book Of Die Design, Ivana Suchy ,Mcgraw-Hill Book Company , Latest Edition , Tool Engineers Hand Book, Astme ,Mcgraw-Hill Book Company , Latest Edition , Robotics Control, Sensing, Vision And Intelligence, Fu.K.S.Gonzalz.R.C., And Lee C.S.G ,Mcgraw-Hill Book Company , 1987 , Audio And Video System – Principles, Maintenance And Troubleshooting , R.Gupta. ,Mcgraw-Hill Book Company ,Second Edition , Computer Organization, V.Carl Hamacher, Zvonko G.Vransic, Safgat G.Zaky ,Mcgraw-Hill Book Company , 5Th Edition , Elements Of Workshop Technology Volume I & Ii, Hajra Chowdry & Bhattacharaya,Media Promoters & Publishers , Latest Edition , Operation And Maintenance Of Electrical Equipment – Volume I & Ii, B.V.S.Rao ,Media Promoters & Publishers , 1St Edition, 1St Reprint 2011 , Elements Of Workshop Technology- Vol. I & Ii,Hajra Choudry & Battacharya ,Media Promoters & Publishers , Latest Edition , Hydraulic Machines, Jagadishlal, ,Metropolitan Book Company New Delhi , Latest Edition , Fluid Mechanics And Hydraulic Machines, Dr. Jagadish Lal ,Metropolitan Book Company New Delhi , Latest Edition , Mechanical Measurements &Control, D.S.Kumar ,Metropolitan Book Company New Delhi , Latest Edition , Introducing Microsoft .Net, David S.Platt ,Microsoft Press , 3Rd Edition , Computer Organization And Design, David A. Patterson And John L. Hennessey ,Morgan Kauffman / Elsevier , 5Th Edition , Complete Knowledge In C, Sukhendu Dey, Debobrata Dutta ,Narosa Publishing House, New Delhi , Reprint 2013 Or Latest Reprint , Software Testing, K.Mustafa And R.A.Khan ,Narosa Publishing House, New Delhi , Reprint 2009 , Software Quality, R.A. Khan, K.Mustafa And Si ,Narosa Publishing House, New Delhi , Reprint 2008 , Building Materials, S.K.Dugga ,New Age International (P) Ltd , 2003 , Reinforced Concrete Design, N Krishnaraju ,New Age International (P) Ltd , Latest Edition , Design Of R C C And Structural Elements ( Rcc Vol I), S S Bhavikatti, ,New Age International (P) Ltd , Latest Edition , G I S Basics, Shahab Fazal ,New Age International (P) Ltd , Latest Edition , Irrigation And Water Resources Engineering, G.L.Asawa ,New Age International (P) Ltd , Latest Edition , Basic Geotechnical Earthquake Engineering,,New Age International (P) Ltd , Latest Edition , Maintenance Of Buildings, A C Panchdhar ,New Age International (P) Ltd , Latest Edition , Engineeringdrawing And Graphics + Autoca, K.Venugopal, ,New Age International (P) Ltd , Latest Edition , Control Of Machines, S.K Bhattacharya ,New Age International (P) Ltd , Second Edition- Reprint 2010 , Quality Manageme, Narayana.V And Sreeniva N.S ,New Age International (P) Ltd , 1996 , Cad/Cam/Cim, R.Radhakrishnan, S.Subramanian ,New Age International (P) Ltd , Latest Edition , Electrical Power System, Clwadhawa ,New Age International (P) Ltd , Fourth Edition, 2009 , Hvdc Power Transmission System & Technology, Kr. Padiyar ,New Age International (P) Ltd , Reprint 2005 , Digital Protection – Protective Relaying From Electromechanical To Microprocessor, Lp Singh ,New Age International (P) Ltd , Second Edition 1997 , Electrical Design Estimating And Costing, K.B.Raina& S.K.Battacharya ,New Age International (P) Ltd , Reprint - 2011 , Control Of Electrical Machines., S.K. Bhattacharya ,New Age International (P) Ltd , Latest Edition , Power Electronics, Mohammed H.Rashid ,New Age International (P) Ltd , Third Edition,2004 , Programming In C, D.Ravichandran ,New Age International (P) Ltd , 1St Edition 1996, Latest Reprint , Linear Integrated Circuits, D.Roychoudhury & Shail.B. Jain ,New Age International (P) Ltd , 2Nd Edition, 2004. , Modern Television Practice– Transmission, Reception, Applications, R.R.Gulati,New Age International (P) Ltd , 5Th Edition , Monochrome & Color Tv , R.R.Gulati ,New Age International (P) Ltd , Latest Edition , Computer Fundamentals Architecture And Organization, B. Ram ,New Age International (P) Ltd , 5Th Edition , Principles Of Data Structures Using C And C++, Vinu V.Das ,New Age International (P) Ltd , Latest Reprint , Practical Scada For Industry, David Bailey Edwin Wright ,Newness , Latest Edition , Programmable Logic Controllers, W. Bolton ,Newness , Latest Edition , Practical C Programming, Steve Oualline ,O’Reilly , 3Rd Edition , Programming Php, Rasmus Lerdorf And Kevin Tatroe ,O’Reilly Publications , 3Rd Edition , Java, A Beginners Guide, Herbert Schildt ,Oracle Press , 6Th Edition , Pc Hardware In A Nutshell, Robert Bruce Thompson. ,Oreilly Media , Third Indian Reprint 2008. , Principles Of Electrical Machine Design, S.K.Sen ,Oxford & Ibh , Latest Edition , Principles Of Gis For Land Resources Assessment, Burrough P A ,Oxford Publication , Latest Edition , Programming In C, Reema Thereja ,Oxford University Press , 2Nd Edition , Digital Electronics, G.K.Kharate ,Oxford University Press , 2010 , Software Engineering Concepts And Application, Subhasjit Dattun ,Oxford University Press , 2010 , Software Engineering Fundamentals, Ali Behforooz And Fredick J Hudson ,Oxford University Press , 2005 , Reinforced Cement Concrete, Mallick And Rangasamy ,Oxford & Ibh , Latest Edition , Digital Communications Fundamentals And Applications, Bernard Sklar & Pabitra Kumar Ray ,Pearson Education , Latest Edition , Advanced Surveying, Sathesh Gopi, R.Sathikumar & N.Madhu ,Pearson Education , Latest Edition , 8051 Microcontroller And Embedded Systems Using Assembly And C , Mazidi,Mazidi And D.Mackinlay,,Pearson Education , Latest Edition , Programmable Logic Controllers – Programming Methods And Applications, John R Hackworth And Fredrick D.Hackworth ,Pearson Education , Latest Edition , Principles Of Wireless Networks– A Unified Approach, Kaveh Pahlavan And Prashant Krishnamoorthy ,Pearson Education , 2002 , Electronic Communications Systems - Fundamentals Through Advanced, Wayne Tomasi ,Pearson Education , Fifth Edition , Digital Design, M.Morris Mano Michael D Ciletti ,Pearson Education , Latest Edition , 8051 Microcontrollers, Mazidi And D.Mackinlay ,Pearson Education , Latest Edition , Principles Of Wireless Networks – A Unified Approach, Kaveh Pahlavan And Prashant Krishnamurty ,Pearson Education , Latest Edition , Wireless Communications Principles And Practice, Theodore S. Rappaport ,Pearson Education , Latest Edition , Mobile Communications, Jochen Schiller ,Pearson Education , Second Edition , Mobile Cellular Communication, Gottapu Sasibhushana Rao ,Pearson Education , Latest Edition , Operating System, Internal And Design Principles, William Stallings ,Pearson Education , 9Th Edition , Operating Systems, Deitel And Deitel ,Pearson Education , 3Rd Edition , Computer Organization And Architecture Designing For Performance, William Stallings ,Pearson Education , 10Thedition , Network Security Essentials, William Stallings ,Pearson Education , 5Th Edition , Cryptography And Network Security, William Stallings ,Pearson Education , 6Th Edition , Computer Networks, Andrew S.Tanenbaum ,Pearson Education , 5Th Edition , Web Development And Design Foundations With Html5, Terry Felke-Morris ,Pearson Education , 8Th Edition , Software Engineering, Ian Sommerville ,Pearson Education , Sixth Edition , Software Testing Principles And Practices, Srnivasan Desikan, Gopalswamy Ramesh ,Pearson Education , First Edition , Mobile Communications, Jochen Schiller ,Pearson Education , Latest Edition , Fundamental Of Multimedia, Ze- Nian Li And M.S.Drew. ,Pearson Education , 2Nd Edition , Multimedia Computing, Communication And Applications, Ralf Steinmetz And Klara Nahrstedt ,Pearson Education , Latest Reprint , Multimedia Systems, John F. Koegel Buford ,Pearson Education , Latest Reprint , Total Quality Management, Date H.Besterfiled ,Pearson Education Asia. , Latest Edition , Automation, Production Systems, And Computer-Integrated Manufacturing, Mikell P. Groover ,Pearson Education Asia. , Latest Edition , 8051 Microcontroller And Embedded Systems Using Assembly And C, Mazidi,Mazidi And D.Mackinlay ,Pearson Education Low Price Edition. , Latest Edition , Design Of Steel Structures, K.S.Sai Ram ,Pearson-Porling Kindersley Pvt Ltd , Latest Edition , 8051 Microcontroller, Kenneth Ayala ,Penram International Publishing (India) Pvt Ltd , Latest Edition , Plc And Industrial Automation An Introduction, Madhuchhanda Mitraand Samarjit Sen Gupta ,Penram International Publishing (India) Pvt Ltd , Latest Edition , Industrial Energy Conservation-, D. A. Ray- ,Pergaman Press , Latest Edition , Electronics Devices And Circuit Theory, Boyestad & Nashelsky ,Phi , Latest Edition , Electronic Devices & Circuits An Introduction, Allen Mottershed,Phi , Latest Edition , Computer Graphics Multimedia And Animation,, Malay K. Pakhira ,Phi , 2Nd Edition , Principles Of Digital Electronics, K.Meena ,Phi , 2011 , Operational Amplifiers And Linear Integrated Circuits, Robert F. Coughlin Frederick F. Driscoll ,Phi , 1992 , Op. Amp & Linear Integrated Circuits, Ramakant. A. Gayakwad ,Phi , 1992 , Digital Electronics- An Introduction To Theory And Practice, William H.Gothmann ,Phi , 1998 , Transducers And Instrumentation, Dvs Murty ,Phi , 2009 , Measurement And Instrumentation, Arun. K ,Phi , 2010 , Sensor And Transducers, D. Patranabis ,Phi , 2011 , Elements Of Engineering Mechanics, Sanchayan Mukherjee ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Surveying, Mimi Das Saikia, B Mohan Das & M Mohan Das ,Phi Learning Pvt. Ltd., New Delhi. , 2010 , Fundamentals Of Surveying, S. K. Roy ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Structural Analysis, Madhan Mohan Dass, ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Structural Analysis, Madhan Mohan Dass ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Surveying, Mimi Das Saikia, B Mohan Das & M Mohan Das ,Phi Learning Pvt. Ltd., New Delhi. , Edition 2010 , Fundamentals Of Surveying, S. K. Roy ,Phi Learning Pvt. Ltd., New Delhi. , Edition 2010 , Limit State Design Of Reinforced Concrete, P C Varghese ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Limit State Design In Structural Steel, .M.R.Shiyekar ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Principles Of Environmental Science And Engineering,, P.Venugopala Rao ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Irrigation And Water Power Engineering, Madan Mohan Das&Mimi Das Saikia ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Limit State Design In Structural Steel, M.R.Shiyekar ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Buildingconstruction, P.C.Varghese ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Energy Engineering And Management, Amlan Chakrabarti ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Power Electronics, M.S.Jamil Asghar ,Phi Learning Pvt. Ltd., New Delhi. , Eastern Economy Edition, 2010 , Principles Of Digital Electronics, K.Meena ,Phi Learning Pvt. Ltd., New Delhi. , 2009 , Operating System, Principles & Design, Pabitra Pal Chaudhuri ,Phi Learning Pvt. Ltd., New Delhi. , 1St Edition , Computer Organization & Architecture, Rajaraman ,Phi Learning Pvt. Ltd., New Delhi. , Latest Reprint , Fundamentals Of Software Engineering, Rajib Mall ,Phi Learning Pvt. Ltd., New Delhi. , 28Th Printing – August 2011 , A Textbook On C, E.Karthikeyan ,Phi Publication, New Delhi , 2008 , Electronics Devices And Circuit Theory , Boyestad & Nashelsky ,Phi Publication, New Delhi , 2009 , Electronicsdevices And Circuits, Allen Mottershed ,Phi Publication, New Delhi , Latest Edition , Modern Electronic Instrumentation And Measurement Techniques, Albert D.Helfrick And Willam David Cooper ,Phi Publication, New Delhi , 1996 , A Text Book On C, E.Karthikeyan ,Phi Publication, New Delhi , 2008 , Power Electronics, M.H.Rashid ,Phi Publication, New Delhi , 3Rd Edition-2005 , Industrial Electronics And Control, Biswanath Paul ,Phi Publication, New Delhi , 2Nd Edition -2010 , Programmable Logic Controllers, Frank D.Petruzela ,Phi Publication, New Delhi , 2Nd Edition- 1998 , Programmable Logic Controllers Principles And Applications, John W. Webb. Ronald A. Reis ,Phi Publication, New Delhi , Latest Edition , Networks Lines And Fields, John D.Ryder ,Phi Publication, New Delhi , Latest Edition , Electronic Communication, Dennis Roddy And John Colen ,Phi Publication, New Delhi , Latest Edition , Principles Of Digital Electronics, K.Meena ,Phi Publication, New Delhi , Latest Edition , Digital Electronics, William H.Gothmann ,Phi Publication, New Delhi , Latest Edition , Digital Electronics – An Introduction To Theory And Practice, William H.Gothmann ,Phi Publication, New Delhi , Latest Edition , Operational Amplifiers And Linear Integrated Circuits, Ramakant A Gayakwad ,Phi Publication, New Delhi , Latest Edition , Operational Amplifiers And Linear Integrated Circuits, Robert F.Coughlin And Frederick F.Driscoll ,Phi Publication, New Delhi , Latest Edition , Microcontrollers, Principles And Applications, Ajit Pal ,Phi Publication, New Delhi , Latest Edition , Vhdl Primer, Bhasker J ,Phi Publication, New Delhi , Latest Edition , Digital Electronics With Pld Integration, Nigel P. Cook ,Phi Publication, New Delhi , Latest Edition , Digital Logic Simulation And Cpld Programming With Vhdl, Steve Waterman ,Phi Publication, New Delhi , Latest Edition , Data And Computer Communications, William Stallings ,Phi Publication, New Delhi , Latest Edition , Computer Networks , Andrew S.Tanenbaum ,Phi Publication, New Delhi , Latest Edition , Wireless Digital Communications, Kamilo Feher ,Phi Publication, New Delhi , Latest Edition , Wireless Communications And Networks, William Stallings ,Phi Publication, New Delhi , Latest Edition , Irrigation Water Management, Dilip Kumar Majumdar ,Phi Publication, New Delhi , Latest Edition , Multimedia Systems Design., Prabhat K.Andleigh, Kiran Thakra ,Phi Publication, New Delhi , Latest Edition , Performance And Design Of Ac Machines, M.G.Say ,Pitman Publishing Ltd , Latest Edition , Principles Of Management, M.Govindarajan And S.Natarajan ,Prentice-Hall Of India (P) Ltd , Latest Edition , Modern Electronic Instrumentation And Measurement Techniques, Albert D. Helfrick William David Cooper ,Prentice-Hall Of India (P) Ltd , Latest Edition , Building Materials, P.C.Varghese ,Prentice-Hall Of India (P) Ltd , 2011 , Building Constructions, P.C.Varghese ,Prentice-Hall Of India (P) Ltd , 2011 , Geographic Information Systems, Lo & Yeung (2005) ,Prentice-Hall Of India (P) Ltd , Latest Edition , Geographic Information Systems & Environmental Modelling, Clarke Parks & Crane (2005) ,Prentice-Hall Of India (P) Ltd , Latest Edition , Foundation Design, Wayne C.Teng ,Prentice-Hall Of India (P) Ltd , Latest Edition , Operations Research, H.A.Taha ,Prentice-Hall Of India (P) Ltd , Latest Edition , Total Quality Management – An Introductory Text, Paul James ,Prentice-Hall Of India (P) Ltd , Latest Edition , Electronic Device And Circuits- An Introduction, Allen Mottershed,Prentice-Hall Of India (P) Ltd , Latest Edition , Techniques Of Press Working Sheet Metal, Donald F. Eary. & Edward A. Reed ,Prentice-Hall Of India (P) Ltd , Latest Edition , Essentials Of Management, Joseph L.Massie ,Prentice-Hall Of India (P) Ltd , 4Th Edition , Elements Of Electrical Engineering, Maria Louis ,Prentice-Hall Of India (P) Ltd , Latest Edition , Digital Electronics, William H.Gothmann ,Prentice-Hall Of India (P) Ltd , Latest Edition , Programmable Logic Controllers – Principle And Applications, John W. Webb ,Prentice-Hall Of India (P) Ltd , Latest Edition , Computer Networks, Andrew S.Tanenbaum ,Prentice-Hall Of India (P) Ltd , 2002 , Data And Computer Communications, William Stallings ,Prentice-Hall Of India (P) Ltd , Eighth Edition 2007 , Computer System Architecture, M.Morris Mano ,Prentice-Hall Of India (P) Ltd , 3Rd Edition , Data Structures A Programming Approach With C, Dharmender Singh Kushwaha And Arun Kumar Misra ,Prentice-Hall Of India (P) Ltd , 2012, Latest Reprint , Classic Data Structures, Debasis Samanta ,Prentice-Hall Of India (P) Ltd , 2Nd Edition , The Internet, Douglas E.Comer ,Prentice-Hall Of India (P) Ltd , 4Th Edition , Introduction To Biomedical Instrumentation, Mandeep Singh,Prentice-Hall Of India (P) Ltd , Latest Edition , Iso 9001, Brain Rethry, Brain Rethry ,Productivity And Quality Publishing Pvt. Ltd. , 1993 , Surveying And Levelling Part 1 & 2, Kanetkar.T.P. & S.V.Kulkarni ,Puna Vidyarthi Griha, Prakashan , 2008 , Surveying And Levelling Part 1 & 2, Kanetkar.T.P. & S.V.Kulkarni ,Puna Vidyarthi Griha, Prakashan , 23Rd Edition , Limit State Theory And Design Of Reinforced Concrete, S.R.Karve And V.L.Shah ,Puna Vidyarthi Griha, Prakashan , 5Th Edition , A Course In Electrical And Electronics Measurements And Instrumentation, A.K. Sawhney ,Puneet Sawhney Dhanpat Rai & Co (P) Ltd. , Latest Edition , Upgrading And Repairing Laptops, Scott Mueller ,Que Publication , Latest Edition , A Text Book Of Fluid Mechanics And Hydraulic Machines,By, R. K Rajput And S.Chand ,R. K Rajput And S.Chand & Co, New Delhi , Latest Edition , Training Manual On Iso 9001 : 2000 & Tqm, Girdhar J.Gyani ,Raj Publishing House , Latest Edition , Electrical Machine Design, A.Naoor Kani ,Rba Publications , Latest Edition , A Course In Electrical Engineering , B.L.Theraja ,S.Chand & Company Ltd, New Delhi ,Reprint 2006 , A Text Book Of Transportation Engineering, S P Chandola ,S.Chand & Company Ltd, New Delhi , Latest Edition , Strength Of Materials, R.S.Khurmi ,S.Chand & Company Ltd, New Delhi , Latest Edition , Strength Of Materials, R. S. Khurmi, S.Chand,S.Chand & Company Ltd, New Delhi , Latest Edition , Production Technology , P. C. Sharma ,S.Chand & Company Ltd, New Delhi ,Edn. X , Thermal Engineerin, , R.S. Khurmi, J.K Gupta ,S.Chand & Company Ltd, New Delhi , 18Th Edition , A Text Book Of Hydraulics, Fluid Mechanics And Hydraulic Machines,R.S. Khurmi ,S.Chand & Company Ltd, New Delhi ,Edn.18 , Thermal Engineering, R.S. Khurmi And J.K. Gupta ,S.Chand & Company Ltd, New Delhi , 18Th Edition , The Automobile, Harbans Singh Reyat, S.Chand,S.Chand & Company Ltd, New Delhi , Latest Edition , Non Conventional Energy Sources And Utilisation , R.K. Rajput - S.Chand ,S.Chand & Company Ltd, New Delhi , 2012 , A Text Book Of Electrical Technology Volume Ii, B.L. Theraja ,S.Chand & Company Ltd, New Delhi , Latest Edition , A Text Book Of Electrical Technology -Volume Ii, B.L. Theraja ,S.Chand & Company Ltd, New Delhi , Latest Edition , Principles Of Power System, V.K.Metha ,S.Chand & Company Ltd, New Delhi , 4Th Edition Reprint 2007 , Electronic Measurements And Instrumentation, R.K.Rajput ,S.Chand & Company Ltd, New Delhi , 3Rd Edition 2009 , Computer Concepts And C, Dr.S.S.Khandare ,S.Chand & Company Ltd, New Delhi , 1St Edition 2010, Latest Reprint , Electrical Technology Vol I And Ii, B.L.Theraja ,S.Chand & Company Ltd, New Delhi , Mutiple Colour Edition,2012 , Principles Of Electronics, V.K.Mehta ,S.Chand & Company Ltd, New Delhi , Second Edition , Electronics And Instrumentation, Dr.S.K.Battachariya Dr. Renu Vig ,S.K. Kataria & Sons, New Delhi , Latest Edition , Principles Of Electrical Machine Design, R.K.Agarwal ,S.K. Kataria & Sons, New Delhi , Latest Edition , Environmental Engineering And Management, Dr.Suresh K.Dhameja- ,S.K. Kataria & Sons, New Delhi , Latest Edition , Soil Mechanics & Foundation Engineering, V N S Murthy ,Sai Kripa Technical Consultants , Latest Edition , Digital Communications, Dr.K.N.Hari Bhat Dr.D.Ganesh Rao ,Sanguine Technical Publisher , Latest Edition , Energy Resource Management, Kirpal Singh Jogi- Sarup And Sons ,Sarup And Sons , Latest Edition , A Course In Electrical And Electronic Measurement And Instrumentation, Umesh Sinha ,Satya Prakashan, New Delhi , Latest Edition , Electrical And Electronics Measurements And Instrumentation, Umesh Sinha ,Satyaprakashan Tech , 1992 , Theory And Problems Of Machine Design, Holowenko, Laughlin ,Schaum’S Outline Series. , Latest Edition , Data Structures With C, Seymour Lipschutz ,Schaums Outlines, Tmh , Latest Reprint , Microprocessor And Microcontroller, R.Theagarajan ,Sci Tech Publication , Latest Edition , Microprocessor And Microcontroller, R.Theagarajan ,Sci Tech Publication, Chennai. , Latest Edition , Limit State Design Of Concrete Structures, Dr.S.Ramachandra ,Scientific Publishers , Latest Edition , Murach’S Mysql, Joel Murach ,Shroff / Murach , 2012, Latest Reprint , Fundamentals Of Tool Design, Dr.John G.Nee ,Society Of Manufacturing Engineers. , Latest Edition , Electrical Machine Design, C.Eswarlal ,Sonaversity , Latest Edition , A Concise Introduction To Software Engineering, Pankaj Jalote ,Springer, Latest Edition , Design Of Electrical Machine, Mittle V.N ,Standard Book – House , Latest Edition , Fluid Mechanics, P.N. Modi & S.M. Sethi ,Standard Publishers & Distributors, New Delhi , Latest Edition , Water Supply And Sanitary Engineering Vol I & Ii, Gurcharan Singh ,Standard Publishers & Distributors, New Delhi , Latest Edition , Hydraulics, Fluid Mechanics And Hydraulics Machines, K.R. Arora ,Standard Publishers & Distributors, New Delhi , Latest Edition , Automobile Engineering Vol- 1, Vol – 2,Kirpal Singh ,Standard Publishers & Distributors, New Delhi , Latest Edition , Learning Material Development Project,,Taramani, Chennai, Cd Programme On Gps And Gis , Latest Edition , Principles Of Transportation & Highway Engineering, G V Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Environmental Engineering, N.N. Basak ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Environmental Engineering, A.Kamala,D.L.Kanthrao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Engineering Hydrology, K.Subramanya ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Production And Operations Management, S.N. Chary ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Essentials Of Management, Koontz &Weihrich ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Business Correspondence & Report Writing, R.C. Sharma And K.Mohan ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , How To Prepare For Group Discussion & Interview (With Audio Cassette), Prasad ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Construction Management And Planning, Sengupta.B, &H.Guha ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Computer Applications In Construction, Boyd.C. & Paulson Jr ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Fluid Mechanics And Machinery, B C S Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Geotechnical Earthquakes Engineering Hand Book,,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Strength Of Materials, S.S.Rattan ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Strength Of Materials,B K Sarkar ,Tata Mcgraw-Hill Publishing Company Ltd , I Edition, 2003 , Production Technology,,Tata Mcgraw-Hill Publishing Company Ltd ,Edn. 18. 2001 , Autocad With Applications, Sham Tickoo,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Applied Thermodynami, Pk Nag ,Tata Mcgraw-Hill Publishing Company Ltd , 2Nd Edition , Production Technology, Hmt, ,Tata Mcgraw-Hill Publishing Company Ltd , Edn. 18 , Manufacturing Process, Myro N Begman ,Tata Mcgraw-Hill Publishing Company Ltd , Edn. 5 , Production Processes, Nitttr, ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronic Circuits & System- Analog And Digital , Y.N.Bapat ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Applied Thermodynamics, P.K. Nag ,Tata Mcgraw-Hill Publishing Company Ltd , 2Ndedition , Quality Management, Howard Cuitlow ,Tata Mcgraw-Hill Publishing Company Ltd , 1998 , Quality Planning And Analysis, Juran J.M And Frank M.Gryna Jr. ,Tata Mcgraw-Hill Publishing Company Ltd , 1982 , Tool Design, Donaldson ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Non-Conventional Energy Resources ,B.H.Khan ,Tata Mcgraw-Hill Publishing Company Ltd ,2Nd Edn, 2009. , Cad/Cam Principles And Applications, Dr.P.N.Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Cad/Cam, Ibrahim Zeid ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Measurement Systems, E. O. Doebelin ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Robotics And Image Processing, Janakiraman.P.A ,Tata Mcgraw-Hill Publishing Company Ltd , 1995 , Circuits And Networks Analysis And Synthesis., A. Sudhakar Shyammohan S Palli ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electric Circuits, Mahamood Nahvi Joseph A Edminister ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electrical Machines, Nagarath ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electrical Machines, Bhattacharya ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronics Devices & Circuits, Salivahanan S, N.Suresh Kumar, A.Vallavaraj,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronics Devices & Circuits, Jacob Millman And Halkias ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Optical Fiber Communication, Gerdkeise ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronic Instrumentation, Hs Kalsi ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Modern Digital Electronics, R.P.Jains ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Digital Principles & Applications, Albert Paul Malvino & Donaldp.Leach ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Introduction To Microprocessor, Aditya P Mathur ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Power System Protection And Switchgear, B Ram & Dn Viswakarma ,Tata Mcgraw-Hill Publishing Company Ltd , Reprint 2000 , Programmable Logic Controllers, Frank D.Petruzella ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electrical Power Distribution System, As Pabla ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Utilization Of Electric Power, Nv Suryanarayana ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Troubleshooting, Maintaining And Repairing Pcs, Stephen J Bigelow ,Tata Mcgraw-Hill Publishing Company Ltd , 2004 , Data Communication And Networking, Behrouz A.Forouzan ,Tata Mcgraw-Hill Publishing Company Ltd , 2006 , Computer Networks, Achyut Godbole ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronics Devices And Circuits, Salivahanan S, N.Suresh Kumar, A.Vallavaraj ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition 2016 , Electronic Principles , Malvino ,Tata Mcgraw-Hill Publishing Company Ltd , 2010 , Electronicsdevices And Circuits, Jacobmillmanandhalkias ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition 2010 , Electronic Instrumentation, Kalsi ,Tata Mcgraw-Hill Publishing Company Ltd , 2004 , Programming In Ansi C , E. Balagurusamy ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Programming And Problem Solving Using C, Isrd Group, Lucknow ,Tata Mcgraw-Hill Publishing Company Ltd , 2008 , Electronic Communication Systems, Kennedy ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Tv And Video Engineering, Arvind M.Dhake ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Communication Electronics Principles And Application , Louis E Frenzel ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Digital Principles And Applications, Albert Paul Malvino & Donald P.Leach ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Linear Integrated Circuits, Salivahanan & V.S.Kanchana Baskaran ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronic Communication Systems, Kennedy – Davis ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Digital Communication, P.Ramakrishna Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Principles Of Communications System, Taub &Schilling ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Computer Installation And Servicing, D.Balasubramanian ,Tata Mcgraw-Hill Publishing Company Ltd , Second Edition 2010 , Troubleshooting, Maintaining And Repairing Pcs, Stephen J.Bigelow ,Tata Mcgraw-Hill Publishing Company Ltd , Fifth Edition , Ibm Pc And Clones, B.Govindrajalu ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Data Communication And Networking, Behrouz A.Forouzan ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Tv And Video Engineering, By A.M.Dhake ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Color Tv, Theory And Practice, S.P.Bali ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Modern Digital Electronics, R.P. Jain ,Tata Mcgraw-Hill Publishing Company Ltd , Third Reprint 2010 , Basic Electricall Engineering, V.N.Mittle ,Tata Mcgraw-Hill Publishing Company Ltd , First Edition , Basic Electrical And Electronics Engineering, R,Muthusubramanian R.Salivajanan ,Tata Mcgraw-Hill Publishing Company Ltd , Seventh Reprint 2011 , Computer Architecture And Organization, John P. Hayes ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition , Data Communication And Networking, Behrouz A.Forouzen ,Tata Mcgraw-Hill Publishing Company Ltd , 5Th Edition , Computer Communications And Networks, Achyuts.Godbole ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Cryptography And Network Security, Behrouza.Forouzen ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition , Programming With Java, E. Balagurusamy ,Tata Mcgraw-Hill Publishing Company Ltd , 5Th Edition , Data Structures And Algorithms, G.A.Vijayalakshm I Pai ,Tata Mcgraw-Hill Publishing Company Ltd , 6Th Reprint Or Latest Reprint , Data Structures Using C, Isrd Group ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Reprint , Programming In C#, E. Balagurusamy ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition , Applications Of .Net Technology, Isrd Group ,Tata Mcgraw-Hill Publishing Company Ltd , 1St Edition Or Latest Reprint , Cloud Computing A Practical Approach 2008 Edition, Cloud Computing A Practical Approach ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Software Engineering, Stephen Schach ,Tata Mcgraw-Hill Publishing Company Ltd , Eight Reprint 2011 , Mobile Computing, Asoke K Talukder,Hasan Ahmed, Roopa R Yavagal ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Multimedia: Making It Work., Tay Vaughan ,Tata Mcgraw-Hill Publishing Company Ltd , 8Th Edition , Multimedia Communication Systems: Techniques, Standards, And Networks, K.R. Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Reprint , Principles Of Multimedia, Ranjan Parekh ,Tata Mcgraw-Hill Publishing Company Ltd , 2Nd Edition , The Complete Reference Linux, Richard Peterson ,Tata Mcgraw-Hill Publishing Company Ltd , 6Th Edition , A Text Book Of Engineering Drawing,R.B. Gupta ,Technical India Publications, New Delhi , Latest Edition , Digital Communication, Dr. J.S.Chitode ,Technical Publications – Pune , Latest Edition , Introduction To Plc, Gary Dunning ,Thomson Del Mar Learning , 3Rd Edition , Data Structures Using C – 1000 Problems And Solutions, Sudipta Mukherjee ,Tmgh, New Delhi , 2Nd Reprint Or Latest Reprint , Industrial & Power Electronics, Harish C.Rai ,Umesh Publications , 2017 , Construction Engineering & Management, Seetharaman. S ,Umesh Publications , Latest Edition , Introduction To Earthquake Engineering,,University Of Tokyo Press , Latest Edition , Digital Electronics And Logic Design, Jaydeep Chakravarthy ,University Press, Hyderabad , First Edition2012 , Introduction To Data Structures Using C, Venkatesh N.Baitipuli ,University Science Press, Chennai , 1St Edition, 2009 Or Latest Reprint , Software Engineering, Rohit Khurana ,Vikas Publishing Ltd , Second Edition , Organizational Behaviours, S.Chandran ,Vikas Publishing Ltd , Latest Edition , Operating Systems, Rohit Khurana ,Vikas Publishing Ltd , 2Nd Edition , Workshop Technology, Waj Chapman ,Vima Books Pvt. Ltd New Delhi , Latest Edition , Energy Auditing In Electrical Utilities, Rajiv Shankar ,Viva Books Pvt. Ltd., New Delhi , Latest Edition , Workshop Tech Vol I,Ii, Iii, Waj. Chapman ,Viva Books Pvt. Ltd., New Delhi , Latest Edition , Wireless And Mobile Network Architectures, Yi-Binglin, Imrich Chlamtac ,Wiley , Latest Edition , Wireless Networks, P. Nicopolitidis ,Wiley , Latest Edition , Operating System Concepts, Abraham Siberschatz, Galvin, Gagne ,Wiley , 9Th Edition , Microprocessor Architecture Programming And Application, Ramesh S. Gaonkar, ,Wiley Eastern Ltd , Latest Edition , Introduction To System Design Using Ic, B.S. Sonde ,Wiley Eastern Ltd , Latest Edition , Fundamentals Of Acoustics, Kingsler And Frey,Wiley Eastern Ltd , Latest Edition , Beginning Android 4 Application Development, Wei-Meng Lee ,Wiley India Edition , Latest Edition , Power Electronics, Mohan, Undeland, Robbins. ,Wiley India Edition. , Media Enhanced Third Edition , Web Programming, Chris Bates ,Wiley India, New Delhi, 3Rd Edition , Cloud Security: A Comprehensive Guide To Secure Cloud Computing, Ronald L. Krutz Russell Dean Vines ,Wiley Publishing, Inc , Latest Edition , Cloud Computing Bible, Barrie Sosinsky ,Wiley Publishing, Inc. , Latest Edition , Total Quality Management For Engineers, Zeiri ,Wood Head Publishers , 1991 , Mechanics Of Structures- Vol 1, S.B.Junnarkar , , Latest Edition , I S 2185 Part I & Ii, Ernest O. Doebelin , , Latest Edition , Pwd & Cpwd Specifications, D.V.S.Murty , , Latest Edition , National Building Code,, , Nbc-2012 , Tamilnadu District Municipal Building Rules And By-Laws,, , Latest Edition , Civil Engineering Drawing And House Planning, B.P. Verma , , Latest Edition , Building Planning And Drawings, Dr N. Kumaraswamy And A. Kameswara Rao , , Latest Edition , Building Planning And Construction, G. Vaidhyanathan, I. Kulasekaran, G. Sathish Kumar , , Latest Edition , Civil Engineering Drawing, S.C.Rangwala , , Latest Edition , A Guide To Civil Engineering Drawing, V.R.Thothathri , , Latest Edition , Theory Of Structures, S. Ramamrutham , , Latest Edition , Analysis Of Structures, V.N. Vazirani & M.M. Ratwani , , Latest Edition , Elementary Theory Of Structures, R.L. Jindal , , Latest Edition , Strength Of Materials, Fv. Warnock , , Latest Edition , Estimating & Costing, Bridie , , Latest Edition , Indian Standard Code Of Practice, Is:1200,, , Latest Edition , I S 456-2000 ; I S 875-1987; I S 800 -2007,, , Latest Edition , Explanatory Hand Book Sp24, Design Aid Sp 16,Detailing Of Reinforcement,Sp 34,, , Latest Edition , Concrete Technology , M.S. Shetty , , Latest Edition , Fire Resistant Construction – Building Construction, S.P.Arora And S.P.Bindra , , Second Edition , Earth Quake Proof , Dr.Janardhanjha And Prof.Suresh Kumar , , Latest Edition , Sinha Is Code Of Practice For Earth Quake , Is Code Of Practice For Fire Resistance, Is Code Of Practice For Pre Stressing,, , Latest Edition , Pile Foundation, Rd Chellis, Mis , , Latest Edition , Construction And Foundation Engineering, Sinha & Janatha Shau , , Latest Edition , Principle Fine Safety Standards For Building Construction, M.Ya Roytman , , Second Edition , Remote Sensing And Geographical Information Systems, Anji Reddy.M. (1998) , , Latest Edition , Analysis And Design Of Substructures (Lsd) – Second Edition 2010, Swami Saran , , Latest Edition , Civil Engineering Drawing, M Chakrabort , , Latest Edition , Civil Engineering Drawing, Gurucharan Singh & Subhash Chandar Sharma , , Latest Edition , Civil Engineering Drawing Manual, S Chand & Company (Pvt) Ltd. , , Latest Edition , Production Systems: Planning, Analysis And Control, J.L.Riggs, 3Rd Ed , , Latest Edition , Productions And Operations Management, A.Muhlemann, J.Oakland And K.Lockyer, Macmillan , , Latest Edition , Operations Research, J.K.Sharma, Macmillan , , Latest Edition , Spoken English – A Self-Learning Guide To Conversation Practice (With Cassette),, , Latest Edition , Quality Control And Applications, Housen&Ghose , , Latest Edition , Industrial Engineering Management, O.P. Khanna , , Latest Edition , Steel Structures, Dr.Subramaniam , , Latest Edition , Town Planning, S.C. Rangwala , , Latest Edition , Town Planning, K.S.Rangwala And P.S.Rangwala , , Latest Edition , Remote Sensing Methods And Application, Michael Hord, R , , Latest Edition , National Building Code Of India- Part-Iii.(2005),, , Latest Edition , Municipal And Panchayat Bye-Laws, Cmda Rules And Corporation Bye-Laws.,, , Latest Edition , Urban And Regional Planning, Ka. Ramegowda , , Latest Edition , Earthquake Resistant Design Of Structures, Pankaj Agarwal And Manish Shrikhande , , Latest Edition , Guidelines For Earthquake Resistant Non Engineered Construction, The Associated Cement Companies Ltd , , Latest Edition , Criteria For Earthquake Resistant Design Of Structures - General Provisions And Buildings, Is: 1893 ( Part 1 ) - 2002,, , Latest Edition , Code Of Practice For Ductile Detailing Of Rc Structures Subjected To Seismic Forces, Is:13920-1993.,, , Latest Edition , Earthquake Tips, C.V.R.Murty, , , Latest Edition , Indian Standard Code Of Practice, Is:1200.,, , Latest Edition , Estimating And Costing, Vazirani & Chandolu , , Latest Edition , Geometrical And Machine Drawing, N.D. Bhatt, Anand , , Latest Edition , Hydraulics, Andrew Parr , , Latest Edition , Fundamentals Of Pneumatic Control Engineering, Festo Manual , , Latest Edition , Electrical Technology, Hughes, , 8Th Edition , Machine Design Bandari,,, , Latest Edition , Industrial Engineering & Management, O.P Khanna , , Latest Edition , Industrial Engineering & Production Management, Martand Telsang , , Latest Edition , Production Engineering , P.C.Shrma. , , Latest Edition , Production And Costing, Gbs Narang And V.Kumar , , Latest Edition , Mechanical Estimating And Costing , Banga & Sharma. , , Latest Edition , Quality Auditing, D.Mills, Chapman And Hall , , 1993 , Refrigeration And Air Conditioning, V.K. Jain, , , Latest Edition , Industrial Refrigeration Hand Book, Wilbert F. Steocker , , Latest Edition , A Course In Refrigeration And Air Conditioning , Domkundwar , , Latest Edition , Principles Of Refrigeration, Dossat, , Latest Edition , Electronic Principles , Malvino , , Latest Edition , Microcontrollers, Principles And Applications – Ajit Pal – Phi Ltd., - 2011.,, , Latest Edition , Biomedical Instrumentation ,Anuradha Publications, Chennai, Dr.M. Arumugam , , Latest Edition , Bio Medical Instrumentation And Measurements, Ii Edition., Leslie Cromwell –Fred J. Wibell, Erich A.P Feither , , Latest Edition , Medicine And Clinical Engineering., Jacobson And Webstar , , Latest Edition , Hand Book Of Bio –Medical Instrumentation., R.S .Khandpur , , Latest Edition , Medical Electronics, Kumara Doss , , Latest Edition , Introduction To Medical Electronics, B.R. Klin , , Latest Edition , Introduction To Biomedical Instrumentation , Mandeep Singh Printice Hall India 2010. , , Latest Edition , Digital Communications, John G.Prokais , , 2011 , Biomedical Instrumentation And Measurements, Leslie Cromwell, Fred J. Wibell, Erich A.P Feither , , Latest Edition , Medicine And Clinical Engineering, Jacobson And Webstar , , Latest Edition , Hand Book Of Bio–Medical Instrumentation., R.S .Khandpur , , Latest Edition , Engineering Mathematics - Dr.M.K.Venkatraman, National Publishing Co, Chennai 2. , Engineering Mathematics – Dr.P.Kandasamy & Others, S.Chand & Co Ltd, New Delhi , Physics, Resnick And Haliday–Wisley Toppan Publishers–England , Engineering Physics–B.L.Theraja–S. Chand Publishers , A Text Book Of Sound–R.L. Saighal & H.R. Sarna–S.Chand & Co. , Mechanics–Narayana Kurup–S. Chand Publishers. , Fundamentals Of Physics – Brijlal And Subramaniam. , Fundamentals Of Electricity – D.N. Vasudeva – S. Chand & Co , Non-Conventional Energy Sources – G.D. Rai.- Khanna Publishers , Text Book Of Remote Sensing And Geographical Information Systems – M. Anji Reddy Bs Publications. , Engineering Chemistry – Jain & Jain – Dhanpat Rai & Sons. , A Text Book Of Engineering Chemistry – S.S. Dara – S. Chand Publication. , A Text Book Of Environmental Chemistry And Pollution Control – S.S. Dara – S. Chand Publication. , Engineering Chemistry – Uppal – Khanna Publishers. , Environmental Chemistry – V P Kudesia – Pragati Publishers. , Chemistry Of Engineering Material – C.V. Agarwal, Andranaidu C. Parameswara Moorthy – B.S. Publications. , A Text Book Of Inorganic Chemistry – P.L. Soni – S. Chand Publication. , Rain Water Harvesting – Hand Book – Chennai Metro Water. , Bhatt N.D. And Panchal V.M., “Engineering Drawing”, Charotar Publishing House, 50Th Edition, 2010. , Gill P.S., “Engineering Drawing”, S.K.Kataria & Sons. , Gopalakrishnan.K.R., Engineering Drawing, (Vol.I And Vol.Ii), Dhanalakshmi Publishers, Edition 2 , Venugopal.K, Sreekanjana G, “Engineering Graphics” New Age International Publishers. , K V Nataraajan “A Text Book Of Engineering Drawing” , Besant Agrawal, C M Agrawal “Engineering Drawing”, Tata Mcgraw Hill Education Private Limited. , Barkinson & Sinha, First Year Engineering Drawing, Pitman Publishers. , Communication Skill, Sanjay Kumar Pushp Lata, Oxford University Press , Communication Skill, , Gph Publication , English Communication Teory And Practical, Manoj Kumar Garg, Scholar Tech Press , Little Redbook - Grammar Made Easy, Terry O Brien
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
Tamil Nadu View Result →
18.
Housing Urban and Rular Development #9943840 Technical Bid
tender for Furniture And Internal Fit-Out At Jnv, Kurung Kumey, Arunachal Pradesh , School Building , (A) Classroom , (I) Classroom Desk Large Size Supply & Installation Big Desk (For Two Persons)-The Overall Dimensions Of Desk Will Be 1066Mmx 930Mm X Height 760Mm, Complete As Per Specifications Enclosed And Direction Of Engineer-In- Charge Having The Table Top Shall Be Made Up Of 18.0 Mm Thick Plywood Is 303 Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish). Table Top Dimensions Shall Be W 930 Mm X D 380 Mm. Edge Towards Bench Shall Be Post Formed With Round Edge. The Remaining Three Edges Must Be Sealed With 2Mmthick Pvc Edge Banding Tape. Edge Band Must Be Trimmed On Edges And Corners. The Desk Shall Be Have Low Chemical Emission Of Vocs (Voltage Organic Compounds) And Carcinogens, Contributing To A Healthier Room Environment. Seat And Back Rest Shall Be Made Of 18Mm Thick Plywood Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish) Except Back Rest. Back Rest Shall Be Have Both Sides Colour Lamination. Technical Details Of Seat And Back Rest Are Mentioned Below:Seating Bench Dimensions Shall L 930 Mm X W 300 Mm X H 450 Mm. Front Side Shall Be Rounded With Post Forming. Remaining Three Edges Shall Sealed With 2Mm Thick Pvc Edge Banding Tape. Back Rest Dimensions Shall L 930 X H 200 Mm Upper Side Shall Be Rounded With Post Forming Remaining Three Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding Tape. Desk Shelve Shall Be Made Of Prime Quality 0.8Mm Thick Crca Sheet Of H150mm X D300mm And Side Stiffeners Of Crca Tube Size 19Mmx19mmx1mmthick. One Vertical Support (Partition) Of Square Tube Size 25Mm Square X1.2Mm Thick Must Be Provided At Centre Of Tray . Upper Modesty Made Of Prime Quality 0.8Mm Thick Crca Sheet Powder Coated Should Be Embossed With Dimples In Round Shape, Height Will Be 150Mm, There Should Be Perforated Lower Modesty Made Of Prime Quality 0.8 Mm Thick Crca Sheet Of Size H150mmxd21mm With Square Perforation, Crca Tube Of Size 19X19x1mm Thick To Be Inserted For Full Length At Bottom Of Jali . Bag Hook Should Be Provide On Both Side Of Piller Made Of Minimum 4Mm Dia Rod Side Frame Structure:- Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25Mmx50mmx1.2Mm Thick Crca Tube , Seat And Back Side Frame Structure Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25.4Mm Diameter X 1.6Mm Thick Erw-1Pipe , There Will Be 8No. Horizontal Supports Are 25Mmx25mmx1.2Mm Thick Crca Pipes. . Bottom Rectangular Tube 50X25x 1.2Mm Thick Should Be Closed With Ppcp Cap Bothside Sand Pipe Dia. 25.4X1.6Mm Thick Should Be Closed With Metal (Backside) And Other Side (Undertheseat) Ppcp Cap, Complete As Per Engineer Incharge Desk Should Be In Semi Knock Down Form With The Help 16 Connecting Pipes ; 8 Pipes On Each Side : Connecting Pipe Size Will Be 20X20x1.2Mm .All Metal Pieces Shall Be Welded Properly Strongly And Conformity With Regulations With Co2 Welding Shall Be Used , Crca Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form A Layer Of Base Coating Of (Iron Phosphating) (0.4 – 0.8) Gm/M² , Automatic Spray Coating Shall Be Applied To Be Followed By A Drying Process In A Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 Tank Treatment With Minimum 45-50 Micron Powder Coating. , (Ii) Classroom Desk Medium Size Supply & Installation Medium Desk (For Two Persons)-The Overall Dimensions Of Desk Will Be 900Mm X 890Mm X Height 690Mm, Complete As Per Specifications Enclosed And Direction Of Engineer-In- Charge Having The Table Top Shall Be Made Up Of 18.0 Mm Thick Plywood Is 303 Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish). Table Top Dimensions Shall Be W 890 Mm X D 380 Mm. Edge Towards Bench Shall Be Post Formed With Round Edge. The Remaining Three Edges Must Be Sealed With 2Mmthick Pvc Edge Banding Tape. Edge Band Must Be Trimmed On Edges And Corners.The Desk Shall Be Have Low Chemical Emission Of Vocs (Voltage Organic Compounds) And Carcinogens, Contributing To A Healthier Room Environment. Seat And Back Rest Shall Be Made Of 18Mm Thick Plywood Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish) Except Back Rest. Back Rest Shall Be Have Both Sides Colour Lamination. Technical Details Of Seat And Back Rest Are Mentioned Below:Seating Bench Dimensions Shall L 890 Mm X W 300 Mm X H 400 Mm. Front Side Shall Be Rounded With Post Forming. Remaining Three Edges Shall Sealed With 2Mm Thick Pvc Edge Banding Tape. Back Rest Dimensions Shall L 890 X H 200 Mm Upper Side Shall Be Rounded With Post Forming Remaining Three Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding Tape. Desk Shelve Shall Be Made Of Prime Quality 0.8Mm Thick Crca Sheet Of H150mm X D300mm And Side Stiffeners Of Ss Crca Tube Size 19Mmx19mmx1mmthick. One Vertical Support (Partition) Of Square Tube Size 25Mm Square X1.2Mm Thick Must Be Provided At Centre Of Tray . Upper Moedsty Made Of Prime Quality 0.8Mm Thick Crca Sheet Powder Coated Should Be Embossed With Dimples In Round Shape, Height Will Be 150Mm, There Should Be Perforated Lower Modesty Made Of Prime Quality 0.8 Mm Thick Crca Sheet Of Size H150mmxd21mm With Square Perforation, Crcat Ube Of Size 19X19x1mm Thick To Be Inserted For Full Length At Bottom Of Jali . Bag Hook Should Be Provide On Both Side Of Piller Made Of Minimum 4Mm Dia Rod Side Frame Structure:- Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25Mmx50mmx1.2Mm Thick Crca Tube , Seat And Back Side Frame Structure Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25.4Mm Diameter X 1.6Mm Thick Erw-1Pipe , There Will Be 8No. Horizontal Supports Are 25Mmx25mmx1.2Mm Thick Crca Pipes. . Bottom Rectangular Tube 50X25x 1.2Mm Thick Should Be Closed With Ppcp Cap Bothside Sand Pipe Dia. 25.4X1.6Mm Thick Should Be Closed With Metal (Backside) And Other Side (Undertheseat) Ppcp Cap, Complete As Per Engineer Incharge Desk Should Be In Semi Knock Down Form With The Help 16 Connecting Pipes ; 8 Pipes On Each Side : Connecting Pipe Size Will Be 20X20x1.2Mm .All Metal Pieces Shall Be Welded Properly Strongly And Conformity With Regulations With Co2 Welding Shall Be Used , Crca Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form A Layer Of Base Coating Of (Iron Phosphating) (0.4 – 0.8) Gm/M² , Automatic Spray Coating Shall Be Applied To Be Followed By A Drying Process In A Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 Tank Treatment With Minimum 45-50 Micron Powder Coating. , (Iii)Teacher Table :Supplying And Installation Of Knock Down Type Office Table Made Of Pre-Laminated Mdf Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Top Of Size 1200 X 600 X 750 Mm. Worktop Shall Be Rounded In All Four Corners And Should Have An Overhung Of 50Mm Alongwith One Drawer Unit Made Of 0.5Mm Thick Crca Steel Sheet. The Table Top Shall Be Supported Over Legs Consists Of 4 Powdered Coated Ms Legs With Connected Beams With Pipe Size 25X25x1.2 Mm Thick. , (Iv)Teachers Chair, Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (V) Teacher Board [Excluding Cost Of Interactive Flat-Panel Display (Ifpd)] Technical Specification For Smart Board With Double-Track Sliding System For Green And White Boards Fitted In An Anodised Aluminium Frame With Concealed Cable Management And Provision For Mounting Of Digital Screen: Supply, Installation, Testing, Commissioning (Sitc) Of An Integrated Digital Teaching–Learning Solution Comprising: (A) Anodised Aluminium Frame, Double Track Sliding System For White & Green Board And Provision For Mounting Of Digital Screen With Concealed Cable Management, (B) Vitrified Magnetic Ceramic-Steel Green Board And White Board Panels. • Dimensions And Configuration: Total Width Of The Setup Is ~12 Feet And Height ~4.0 Feet From The Board Surface (Excluding The Width Of Aluminium Frame). • Material: Providing And Fixing Anodised Aluminium (Alloy 6063-T6) Framed Sliding System For Smart Board With Minimum 2.0 Mm Thick Extruded Sections, Anodised To Aa15 Grade As Per Is 1868, Mounted On A Heavy-Duty Top-Hung Aluminium Track (Min. 2.5 Mm Thick) With Sealed Ball-Bearing Nylon/Pu Rollers (Load Capacity Not Less Than 120 Kg Per Panel), Concealed Bottom Guide, Epdm Gaskets, Ss-304 Fasteners, Pelmet/Valance Cover, And Soft End-Stops/Soft-Close Mechanism, Including All Brackets, Fixings, Alignment, Cable Provisions, Commissioning, And Making Good Complete As Per Drawings And Engineer-In-Charge. • Design: One Slot To Fix Ifpd, Other Slot For Green & White Boards Sliding On Double Track System With Locking Facility On Sliding Frame To Keep The Ifpd Display Safe. • Top & Bottom Rails: Tracks Shall Be Aligned And Reinforced To Ensure Boards Move Easily And Without Wobble. • Back Side: The Backside Of The Smart Board, To Concealed The Wall Surface, Provided & Fixed With 18 Mm Thick Hdhmr Board Laminated (White Coloured Matte Finish) With 0.8 Mm, Edges Sealed With 1 Mm Pvc Edge Banding, Fixed To The Anodised Aluminium Frame With Concealed Screws/Rivets, With Ventilation Slots As Required, And Shall Be Moisture, Termite And Borer Resistant. • Load Capacity: Safe To Hold Ifpd + White & Green Boards With =1.5× Safety Factor. • Cable Management: Built-In Channels For Power, Lan, Hdmi, Usb. • Safety: Rounded Edges, Tamper-Resistant Covers, Concealed Fixing. • Finish: Durable, Corrosion-Resistant Coating Suitable For Indoor Use. • Additional Requirements:(A) All Boards And The Structure Must Be Securely Fixed To The Wall With Appropriate Fasteners. (B) Provision For Cable Management Must Be Included For The Ifpd (I.E., Concealed Conduit/Path For Power And Data Cables). , (C) The Unit Must Be Free From Sharp Edges, Splinters, Or Any Protruding Parts That Could Cause Injury. (D) Installation Height Should Ensure Comfortable Writing Access For Average Adult And Student Height (Typically Bottom Edge ~2.5 To 3 Feet From The Floor). (B) Vitrified Magnetic Ceramic-Steel Green Board And White Board Panels: • Function: Boards Shall Slide Horizontally On A Top And Bottom Aluminium/Steel Channel Track To Fully Cover Or Reveal The Ifp As Needed. • Material: Vitrified Ceramic-Steel, Magnetic, Double-Coated. • Sliding Boards: Quantity: 1 No. Green Board & 1 No. White Board. • Green Board Surface: Matte, Chalk-Friendly, Stain/Scratch Resistant. • White Board Surface: Glossy Surface, Dry-Erase Marker Friendly, Ghost-Free, Easy Clean. • Size: ~6 Feet (W) × 4 Feet (H) (Each Board) With Thickness 8Mm. • Frame: Anodised Aluminium, Rounded Edges, Concealed Fasteners.Note - Dimensions Mentioned Are Indicative. Actual May Vary As Per Site Requirements , (B) Principal And Vice-Principal Room , Table: Supplying And Installation Of Site Knock Down Type Office Table As Per Approved Design And Directrion Of Engineer-In-Charge. Worktop-Worktopshallbemade25mmthickpre-Laminatedmdfboardwithdecorativelaminationononesideandbalancing Lamination On Other Side Confirming To Is 12406:2003 With Post Forming On Front,Back Andmachine Pressedpvc Egde Banding 2Mm Thick Glued With Industrial Adhesive And Diffused With Board Monolithically On Other Two Sides. Table Top Shall Have 75Mm Overhung On Front And 25Mm Overhung On Sides. Understructure- C-Type Leg Shall Be Made Of Tubular Section Of 50Mm X 50Mm X 1.6Mm (Wall Thickness) Thick Vertical Member And40mm X40mmx1.6Mm(Wall Thickness) Horizontal M.S.Pipe Confirming Is-Grade 4932Shall Be Finished With Epoxy Polyster Powder Coated Dft50-60Micron.Thelegsshallbefittedtothegroundwithm8screwlevelerwiththeheightadjustmentupto15mm.Thecross Membersshallbemountedbyendbracketsmadeof3mmthickcrcasteelsheetconfirmingis513:2008 Andfinishedwithepoxy Polyster Powder Coated Dft 50-60 Micron Confirming Is 13871:1993. Wiremanagement-Electricalwiresshallbecarriedfromhorizintal/Verticalduct Madeof0.7Mmcrca Steelsheet Confirmingtois 513:2008. The Switch Plate Or Grommet Depending Upon Requirement Shall Also Be Provided For Electrical/Lan Connection On Table Top. Modesty Panel -Modesty Panel Of Height 450Mm Shall Be Made Of 1.5Mm Thick Crca Sheet Sheet Confirming To Is 513: 2008And Shall Be Finised With Epoxy Polyster Powder Coated Dft 50-60Micron. Storage Body- Storage Top Shall Also Be Made Of 25Mm Thick Pre-Lam Mdf Board Confirming To Is 12406:2003 With Post Forming On Two Sides And Machine Pressed Pvc Egde Banding 2 Mm Thick Glued With Industrial Adhesive And Diffused With Board Monolithically On Other Two Sides. The Body Of Storage Unitsshall Be Made Of 0.8Mm Thick Crca Steel Sheet And Skirting Shall Be Of 1.2Mm Thick Crca Steel Sheet Confirming To Is 513: 2008 Finished With Epoxy Powder Coated Of Dft 50-60 Micron Confirming Is 13871:1993. Internal Shelves Shall Be Also Made Up Of 0.8Mm Crca Steel Sheet Confirming To Is 513: 2008 And Shall Be Mounted With The Metal Shelf Support Pin Made Of 2Mm Thick Crca Steel Sheet With Nickel Or Chrome Plating.M10 Screw Leveler Is Given With Height Adjustment Up To 12Mm To 15Mm. , (I) Principal Room Table Table Of Size 1800Mm (W) X 900Mm (D) X 750Mm (H) With Side Storage Of Size 900Mm (W) X 450Mm (W) X 750Mm (H) And Back Storage 1800Mm (W) X 450Mm (D) X 750Mm (H) As Per Specifications Above , (Ii) Vice-Principal Room Table Table Of Size 1650Mm (W) X 900Mm (D) X 750Mm (H) With Side Storage Of Size 900Mm (W) X 450Mm (W) X 750Mm (H) And Back Storage1650 Mm (W) X 450Mm (D) X 750Mm (H) As Per Specifications Above. , (Iii) Principal Room Chair High Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1210H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat,Used Pu Moulded Foam On Seat Of D-45 Kg/M3 , Back Ofchair Is Made Of Injection Moulded Pp Material Structure Upholstered With Mesh Fabric , Adjustable Lumber Support Upholstered With Fabric , Adjustable Headrest On Back Upholstered With Mesh Fabric ,Seat Size:- 470W ±10 X 460D ±10 X 70Thick. ±5 Mm , Back Size:500W±10X780h±10,Mechanism:-Thesynchrotiltmechanism,Usedgasliftof90mmsizeofclass-Ivgrade,Armrest:-Pu Paddedadjustable Armrestfixedwith Seat ,Chair Base & Wheels: Ss 202 Polished Finish Plated Base Consists Of5 Prongs With 640±5Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , (Iv) Principal Roomvisitor Chair, Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (V) Vice-Principal Room Chair High Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1210H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat,Used Pu Moulded Foam On Seat Of D-45 Kg/M3 , Back Ofchair Is Made Of Injection Moulded Pp Material Structure Upholstered With Mesh Fabric , Adjustable Lumber Support Upholstered With Fabric , Adjustable Headrest On Back Upholstered With Mesh Fabric ,Seat Size:- 470W ±10 X 460D ±10 X 70Thick. ±5 Mm , Back Size:500W±10X780h±10,Mechanism:-Thesynchrotiltmechanism,Usedgasliftof90mmsizeofclass-Ivgrade, Armrest:-Pu Paddedadjustable Armrestfixedwith Seat ,Chair Base & Wheels: Ss 202 Polished Finish Base Consists Of5 Prongs With 640±5Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , (Vi) Vice Principal Visitor Chair: Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (C) Sofa Set , (I)Sofa Foyer One Seater Size In Mm - 880(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (Ii)Sofa Foyer Two Seater Size In Mm - 1460(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (Iii)Sofa Foyer Three Seater Size In Mm - 1930(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (Iv) Coffee Table The Coffee Table Measures 900 Mm (W) × 600 Mm (D) × 450 Mm (H) And Features A 10 Mm Thick Clear Tempered Glass Top And Shelf Supported On A Stainless Steel 202 Frame Made Of 40×40 Mm Square Tubes With A Mirror-Polished Finish. All Joints Are Argon-Welded, Ground, And Buffed For A Seamless Look. The Lower Glass Shelf For Additional Storage, And Rubber Pads Or Level Adjusters Are Provided At The Base For Stability And Floor Protection. The Table Combines Modern Design, Durability, And Elegant Finish, Making It Ideal For Offices And Reception Areas. , (D) Staffroom , (I) Table (Seating Capacity As Per Actual Requirement) Supplying And Installation Of A Modular, Knock-Down Center Island Table Sized Approximately 3600 Mm In Length (Adjustable To Actual Requirements) By 1350 Mm In Width And 750 Mm In Height, Constructed From High-Quality 25 Mm Thick Commercial Grade Plywood Or Bwr (Boiling Water Resistant) Grade Plywood With Decorative Lamination On Visible Faces And Balanced Lamination Beneath For Enhanced Strength And Moisture Resistance. All Edges Are Sealed With 2 Mm Thick Machine-Pressed Pvc Edge Banding Bonded With Industrial Adhesive To Ensure A Seamless, Monolithic Appearance. The Gable Ends Are Fabricated Of The Same 25 Mm Thick Commercial Grade Plywood With Decorative Lamination On Both Sides And Matching Edge Banding For Consistent Aesthetics And Superior Durability.Modesty 18Mm Matching Laminate. The Table Shall Have An Underbody Vertical Support Panel Running Continuously Along Its Length To Enhance Stability And Strength.The Understructure Uses Precision-Cut, Laminated Plywood Panels Assembled With Knock-Down Fittings For Ease Of Installation And Future Reconfiguration, Ensuring Superior Load-Bearing Capacity And Long-Term Durability. A Concealed Wire Management System Beneath The Worktop Integrates Pre-Laminated Plywood Cable Trays Or High-Quality Plastic Trays Fixed With Durable Brackets, Complete With Provisions For Switch Plates And Grommets To Facilitate Safe, Organized Routing Of Electrical And Data Cables. All Surfaces Are Finished For Scratch And Stain Resistance With Anti-Fungal And Moisture-Resistant Properties, And Installation Will Follow Best Woodworking Practices, With Final Dimensions And Seating Capacity Determined By The Actual Site Layout. , (Ii) Work Space With In-Built Lockable Overhead Storage Space For Staffroom (As Per Actual Requirement) Supplying And Installation Of Site Knock-Down Type Modular Wall-Mounted Workspace Unit Of Approximate Size 900W X 600D X 750H Mm (For One Staff), Including Working Counter And Lockable Overhead Storage Cabinet Of 900W X 450D X 650H Mm. The Structure Shall Be Made Of 18 Mm Thick Bwp Grade Plywood With Decorative Laminate On External Surfaces And Balancing Laminate On Inner Faces Conforming To Is:303/Is:12406. All Exposed Edges Shall Be Sealed With 2 Mm Pvc Edge Banding. The Worktop Shall Be 25 Mm Thick Laminated Plywood Board With Post-Formed Front Edge And Machine-Pressed Pvc Edge Banding, Securely Fixed To The Wall Using Concealed Ms Cleats And Brackets. The Overhead Cabinet Shall Be Fitted With Soft-Close Concealed Hinges, Ss Handles, And Magnetic Catchers Of Approved Make, With One Adjustable Shelf And Modular Connectors For Alignment And Expansion To Adjoining Units. Each Workspace Shall Include Provision For Electrical Connectivity With 6A/16A Modular Sockets (As Per Requirement) Positioned At Approximately 450 Mm Above Finished Floor Level For Easy Access. The Worktop Shall Have A Circular Cable Hole (50–60 Mm Diameter) With Grommet For Laptop And Equipment Wiring. All Wiring, Sockets, And Conduits Shall Be Concealed Neatly Within The Table Body, Routed Through Internal Pvc Raceways To Maintain A Clean, Clutter-Free Appearance. Junction Boxes And Ducts Shall Be Integrated To Provide Safe, Organized Cable Management Without Visible Wiring. The Entire Unit Shall Be Wall-Mounted Using Heavy-Duty Ms Brackets Or Suitable Fasteners Based On Wall Type, Finished Neatly With Matching Silicone Sealant At All Joints. All Fittings And Hardware, Including Soft-Close Hinges And Handles, Shall Be Of Reputed Make. The Unit Shall Be Termite-Resistant, Moisture-Resistant, Easy To Maintain, And Made From Isi-Marked Prime Quality Boards. The Overall Layout And Detailing Shall Match The Approved Reference Image, With Actual Dimensions Finalized As Per Site Requirements And Direction Of The Engineer-In-Charge. , (Iii) Chair Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (Iv) Personal Locker Unit For Staffroom And One Each For Principal And Vice Principal Room Supplying And Installation Of Metal Lockers With Cam Lock One Unit Consiting Of 380Mm (W) X 450Mm (D) X 1800 Mm (H) With 4 Lockers. Body-Lh And Rh Side And Back Panel Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008. Shelf Hanging Bracket Is Welded On Both The Side Panel By Spot Welding. Shelf Hanging Bracket Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008. Front Frame, Top And Bottom Part Made Up 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008 And Horizontal Part Is Made Up 0.8 Mm Thick Crca Steel Sheet Confirming To Is 513:2008. On A Front Frame Horizontally Provision Is Given At A Common Distance To Hold Shutter Bracket. Locker’S Top Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming Is 513:2008 Which Is Having Standard Dimension 375 X378mm. Shelf Is Also Made Up Of 0.8 Mm Crca Steel Sheet Confirming To Is 513:2008. Shutter- Is Made Up On 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008. All The Shutter Are Hung On Shutter Pin And Shutter Bracket, Louvers Are Given In Shutter For Air Flow. Pvc Flush Handle And Name Plate Is Used For Handling And For Name Plate Tagging. Standard Locking Arrangment Is Used For Locking Each Shutter. The Bodies Including Shelves Are Given Anti-Rust Surface Treatment & Are Powder Coated With Epoxy Polyester Powder Coating Of Dft 50- 60 Micron Confirimg To Is 13871:1993. , (E)Library , (I) Supply And Installation Of Glass-Door Storage Of Size 915 Mm (W) X 482Mm (D) X 1980Mm (H). It Should Have Shelf Thickness Of 0.8Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) With Clear Glass Of > 4.0 Mm Thick And All Other Components Shall Have A Thickness Of 0.8Mm. These Components Shall Be Made Of Crca Steel Sheet ‘D’ Grade High Yield Strength As Per Is 513:2008 The Glass Door Storwel Shall Have A Ss Handle And A Two-Way Locking Mechanism With Shooting Bolt. It Should Have A Height-Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base.All Metal Components Would Be Epoxy Polyster Powder Coated Dft 50-60 Micron Confirimg To Is 13871:1993. , (Ii) Wall Mounted Built In Open Book Shelf : Overall Size 900L (Length May Vary As Per Actual Requirement) X300dx2100hmm,Top Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Banding ,Side Panel Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending , Skirting Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending ,Back Panel Made Up Of 18Mm Thick Postlam Plywood , One Number Of Bottom Storage Cabinets Alongwith The Complete Length Of Heght 600Mm As Per Ref. Image ,Shelf Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending, All Wooden Panels Fix Joints With Minifix Dowels & Other Fitting Equipment , All Wooden Panels Prime Quality Board With Isi Marked. Complete Structure Design Should Be As Per Reference Image. , (Iii) Table (Seating Capacity As Per Actual Requirement) Supplying And Installation Of A Modular, Knock-Down Center Island Table Sized Approximately 3600 Mm In Length (Adjustable To Actual Requirements) By 1350 Mm In Width And 750 Mm In Height, Constructed From High-Quality 25 Mm Thick Commercial Grade Plywood Or Bwr (Boiling Water Resistant) Grade Plywood With Decorative Lamination On Visible Faces And Balanced Lamination Beneath For Enhanced Strength And Moisture Resistance. All Edges Are Sealed With 2 Mm Thick Machine-Pressed Pvc Edge Banding Bonded With Industrial Adhesive To Ensure A Seamless, Monolithic Appearance. The Gable Ends Are Fabricated Of The Same 25 Mm Thick Commercial Grade Plywood With Decorative Lamination On Both Sides And Matching Edge Banding For Consistent Aesthetics And Superior Durability.Modesty 18Mm Matching Laminate. The Table Shall Have An Underbody Vertical Support Panel Running Continuously Along Its Length To Enhance Stability And Strength.The Understructure Uses Precision-Cut, Laminated Plywood Panels Assembled With Knock-Down Fittings For Ease Of Installation And Future Reconfiguration, Ensuring Superior Load-Bearing Capacity And Long-Term Durability. A Concealed Wire Management System Beneath The Worktop Integrates Pre-Laminated Plywood Cable Trays Or High-Quality Plastic Trays Fixed With Durable Brackets, Complete With Provisions For Switch Plates And Grommets To Facilitate Safe, Organized Routing Of Electrical And Data Cables. All Surfaces Are Finished For Scratch And Stain Resistance With Anti-Fungal And Moisture-Resistant Properties, And Installation Will Follow Best Woodworking Practices, With Final Dimensions And Seating Capacity Determined By The Actual Site Layout. , (Iv)Chair, Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (F) Computer Lab , (I) Computer Work Station Supplying And Installation Of Knock Down Type Dual Computer Work Station Of Unit Size 1500Mm (Length, Actual Length May Vary As Per Actual Site Requirement) X 600M (W) X 750Mm (H) For Two Students Work Top- Work Top Shall Be Made 25Mm Thick Laminated Plywood With Decorative Lamination On One Side And Balancing Lamination On Othersideconfirmingtois12823:1990With2mmthickmachinepressedpvcedgebandinggluedwithindustrialadhesiveand Monolithically Diffused With Board On All Sides. Understructure Supporting Frame Consist Oflaminated Plywood Gable Ends Of 18Mm Wire Management-The Vertical /Electrical Duct & Horizontal Cabletray ( Wire Carriers) Aremadeof Crca Steel Sheet & Fixed To The Understructure Below Worktop With Specially Designedbrackets. Provision For Fixing Switch Platesare Prividedin The Cable Tray For Easy Access Through Wire Mangaer Or Pvc Grommet. , (Ii) Computer Chair For Student Medium Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1010H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat ,Used Pu Moulded Foam On Seat Ofd-45 Kg/M3 , Back Of Chair Is Made Of Injection Moulded Pp Material Structure Combination Of Upholstered With Mesh Fabric , Seat And Back Connected Through Metal Powder Coated Plate Having Adjustable Lumber Support Upholstered With Fabric , Seat Size:- 490W ±10 X 450D ±10 X 70Thick. ±5 Mm , Back Size: 525W ±10 X640h ±10,Mechanism:- The Synchro Tilt Mechanism ,Using Gaslift Of 90 Mm Size Of Class 3 Grade,Armrest: Pu Padded Adjustable Armrest,Chair Base & Wheels: Revolving Pedestal Ss 202 Polsihed Finish Base Consists Of 5 Prongs With 640±5 Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , (G) Laboratories , (I) Supply And Installation Of Glass-Door Storage Of Size 915 Mm (W) X 482Mm (D) X 1980Mm (H). It Should Have Shelf Thickness Of 0.8Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) With Clear Glass Of > 4.0 Mm Thick And All Other Components Shall Have A Thickness Of 0.8Mm. These Components Shall Be Made Of Crca Steel Sheet ‘D’ Grade High Yield Strength As Per Is 513:2008 The Glass Door Storwel Shall Have A Ss Handle And A Two-Way Locking Mechanism With Shooting Bolt. It Should Have A Height-Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base.All Metal Components Would Be Epoxy Polyster Powder Coated Dft 50-60 Micron Confirimg To Is 13871:1993. , (I) Physics Lab , Along The Wall Table:: Supply And Installation Of Along-The-Wall Knock Down Type Modular Laboratory Tables Of Size 1400 Mm(L) (Length May Vary As Per Actual Requirement) × 750 Mm (W) × 900Mm H . Above The Counter, With An Internal Conduit For All Wiring. Modular Switch Plates And 02 Nos Of 220V/16A Switch Socket (With Individual Circuit Protection) Will Be Cnc-Mounted Every 1 M (Or Per Site Layout). All Conduits And Components Shall Comply With Applicable Laboratory Safety And Performance Standards. Dust-Proof, Removable Access Covers To Permit Maintenance And Future Upgrades, And Outlets To Be Ergonomically Positioned For Seated And Standing Use. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Crca With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg). The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , Island Table:The Laboratory Table Shall Be Provided As Knock Down Type Modular Island Laboratory Tables Units Of Overall Size 8000(L) (Length May Vary As Per Actual Requirement) × 1500(W) × 900H . It Shall Be Constructed In Modular Segments Of 1400(L) × 1500(W) × 860(H) Mm Each For Ease Of Manufacture, Handling, And Installation. The Worktops Will Include A Powder-Coated Bus Running Their Full Length, Above The Counter, With An Internal Conduit For All Wiring. Modular Switch Plates And 04 Nos (02 Facing Each Side) Of 220V/16A Switch Socket (With Individual Circuit Protection) Will Be Cnc-Mounted Every 1 M (Or Per Site Layout). All Conduits And Components Shall Comply With Applicable Laboratory Safety And Performance Standards. Dust-Proof, Removable Access Covers To Permit Maintenance And Future Upgrades, And Outlets To Be Ergonomically Positioned For Seated And Standing Use. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Crca With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg). The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , (Ii) Chemisty Lab , Along The Wall Table: Supply And Installation Of Along-The-Wall Knock Down Type Modular Laboratory Tables Of Size 1400(L) (Length May Vary As Per Actual Requirement) × 750(W) × 900(H) Mm × 1550H (Two-Tier). Four Standard Ss304 Sinks Shall Be Installed, Each Fitted With A 3-Way Ss 304 Faucet Of Premium Make. Reagent Racks Made Completely Out Of Stainless Steel Shall Be Provided To Cover The Entire Table Length(Along The Wall) Except The Sink Area. These Racks Shall Be 300D × 700H And Of Complete Modular Design, Consisting Of Two Horizontal Storage Shelves Made Of Stainless Steel With Suitable Cutouts For Electrical Switches And Sockets. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Stainless Steel Sheet Polished Finish. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Ss Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Stainless Steel Sheet With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg). Reagent Shelves Shall Be Made Of A Ss 304, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , Island Table: The Laboratory Table Shall Be Provided As Knock Down Type Modular Island Laboratory Tables Units Of Overall Size 8000(L) (Length May Vary As Per Actual Requirement) × 1500(W) ×900(H) Mm × 1550H (Two-Tier). It Shall Be Constructed In Modular Segments Of 1600(L) × 1500(W) × 860(H) Mm Each For Ease Of Manufacture, Handling, And Installation. Four Standard Ss304 Sinks Shall Be Installed, Each Fitted With A 3-Way Ss 304 Faucet Of Premier Make. Stainless Steel 304 Reagent Racks Shall Be Provided Across The Entire Table Length In Centre Except The Sink Areas, With Dimensions 300D × 700H. These Racks Shall Also Be Of Modular Design With Two Horizontal Stainless Steel Shelves, Cutouts For Switches And Sockets, Provision For Electrical Outlets, And Accommodation For Granite Pieces. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Ss Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Powder Coated Crca With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg). Reagent Shelves Shall Be Made Of A Polished Finish Ss, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , (Iii) Biology Lab Table , Along The Wall Table: Supply And Installation Of Along-The-Wall Knock Down Type Modular Laboratory Tables Of Size 1400(L) (Length May Vary As Per Actual Requirement) × 750(W) × 900(H) Mm × 1550H (Two-Tier). Four Standard Ss304 Sinks Shall Be Installed, Each Fitted With A 3-Way Ss 304 Faucet Of Premium Make. Reagent Racks Made Completely Out Of Stainless Steel Shall Be Provided To Cover The Entire Table Length(Along The Wall) Except The Sink Area. These Racks Shall Be 300D × 700H And Of Complete Modular Design, Consisting Of Two Horizontal Storage Shelves Made Of Stainless Steel With Suitable Cutouts For Electrical Switches And Sockets. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Stainless Steel Sheet Polished Finish. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Ss Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Stainless Steel Sheet With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg).. Reagent Shelves Shall Be Made Of A Ss, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , Island Table: The Laboratory Table Shall Be Provided As Knock Down Type Modular Island Laboratory Tables Units Of Overall Size 8000(L) (Length May Vary As Per Actual Requirement) × 1500(W) × 900(H) Mm × 1550H (Two-Tier). It Shall Be Constructed In Modular Segments Of 1400(L) × 1500(W) × 900(H) Mm Each For Ease Of Manufacture, Handling, And Installation. Four Standard Ss304 Sinks Shall Be Installed, Each Fitted With A 3-Way Ss 304 Faucet Of Premium Make. Stainless Steel Reagent Racks Shall Be Provided Across The Entire Table Length In Centre Except The Sink Areas, With Dimensions 300D × 700H. These Racks Shall Also Be Of Modular Design With Two Horizontal Stainless Steel Shelves, Cutouts For Switches And Sockets, Provision For Electrical Outlets, And Accommodation For Granite Pieces. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Crca With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg).. Reagent Shelves Shall Be Made Of Polished Finish Ss, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , (Iv) Lab Stool Supply And Installation Of Lab Stool Seat Revolving Stool With Backrest Overall Dimension: 410W ±10 X 410D ±10 X 820H ±10 Mm,Seat Ofchairismadeof12mmthickhotpressedplywoodpastedwithhighdensity Pufoam&Leatherette Upholstery,Back Ismade Of 12Mmthickhotpressedplywoodpastedwithpufoamd-40Kg/M3,H-20Seatandbackfixedthroughmetal Powdercoatedspine Covered With Plastic Cover, Seat Size: 400W ±10X 400D ±10 X 75Thick. ±5 Mm, Back Size: 450W ±10 X 240H ±10 X 50Thick. ±5Mm, Ground To Seat Height-440-560Mm, Mechanism:- Machanism Design With Features Of Revolving At 360 Degree.Machanism Provided Upright Position Locking,Seating Height Can Be Adjusted With A Pneumatic Gas Lift,Gaslift: Lift -Used Gaslift Of 90 Mm Size Of Class- Iv Grade With Plastic Bellow Cover, Chair Base & Wheels: Chair Basemade Of Polished Finished Ss 202 Grade Stainless Steel, Base Consists Of Polished Finished Ss 202 Grade Stainless Steel 5 Prongs With 560±5 Mm Pitch Circle Diameter, Polished Finished Ss 202 Grade Stainless Steel Circular Foot Rest As Per Ref. Image, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor. , Kitchen & Dining , (A) Dining Table Dining Table: Polished Finish Ss Dinning Table Consists Of Dinning Top Is Made Up Of 1 Mm Thickness Stainless Steel Sheet Of Ss 304 Grade With Overall Dimension Of 1800(L) X 700(D) X 750(H). The Table Top Is Reinforced With A 18 Mm Ply Board On Stainless Steel Frame Of Square Section 40Mmx40mmx1.6Mm. Dinning Top Of Stainless Steel Sheet Shall Be Extended To The Sides And A Depth Upto 40 Mm Under The Table Top In All Directions Includingedge Rounding, Grinding And Finishing Etc. All Complete. The Table Top Shall Finish In Such A Manner To Avoid Any Sharp Edges. The Table Will Be Supported By Four Hollow Legs Made From Ss 304 Grade Stainless Steel. The Hollow Legs Shall Be Of Square Type Of Size50mmx50mmx1.6Mm.Theselegsshallbesecurelyweldedormechanicallyfastenedtotheundersideofthetabletopframe.For Additional Structural Stability, Stainless Steel Cross Supports Shall Be Provided Between The Legs As Shown In Figure With 40Mmx40mmx1.6Mm Ss Square Section. The Table Shall Include Rubber Shoes At The Bottom Of Each Leg To Prevent Floor Damage And Ensure Stability. The Design Shall Prioritize User Safety With No Sharp Corners Or Edges. The Table Must Be Structurally Sound And Capable Of Supportingauniformlydistributedloadofatleast250kg.Allmaterialsusedmustconformtorelevantisstandards,Andthefinished Product Should Be Free From Burrs, Dents, Or Deformities. Ss 304. , (B) Dining Bench Dining Bench: The Bench Shall Be Of Size 1800 Mm In Length, 300 Mm In Depth, And 450 Mm In Height, Suitable For Use In Residential Schools. The Bench Top Shall Be Made Of 18 Mm Thick Hdhmr + Laminated , Finished With A 1 Mm Thick Decorative Laminate On The Topsurface, Anda Balancing Laminatebacking On The Underside Toensure Dimensional Stability. All Exposed Edges Shall Be Sealed With Pvc Edge Banding Or Machine-Finished To Prevent Splinters And Enhance Durability. The Plywood Shall Be Scratch-Resistant, Water-Resistant, Andeasytoclean,Withalightwoodgrainorequivalentfinishasapproved.Thesupportingframeshallbefabricatedframeofsquare Hollow Section40mmx40mmx1.6Mmss 304 Grade Stainless Steel In Polished Finish.Theselegsshallbesecurelyweldedtothe Undersideofthebenchtopframe.Thebenchshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability.Thedesignshallprioritizeusersafetywithnosharpcornersoredges.Thebenchmustbestructurallysoundandcapableof Supportingauniformlydistributedloadofatleast250kg.Allmaterialsusedmustconformtorelevantisstandards,Andthefinished Product Should Be Free From Burrs, Dents, Or Deformities. , Boys And Girls Dormitories , Beds/ Partition Wall In Dormitory Hall, Rcc Bed (900Mmx1800mm) With 18Mm Hdhmr With With 1Mm Matt-Finish Laminate On Top Of Bed Shall Be Provided. Rcc Partition Wall Cladding Must Be Using 8Mm Plywood Covered With 2Mm Matt-Finish Laminate All Around Corners And No Sharp Edges. With All Fixtures Fasteners Adhesives Etc All Inclusive Required For Fixing. , Staff Quarters , (A) Rooms Wardrobe , Fabricating, Supplying, Fixing & Placing In Position Wardrobe Of Size 900 (L) X 1800 (H) X 600 (D). The Unit Comprises Of Wardrobe Including, A Single Drawer, Hanger Rod,In Pre Laminated Hdhmr Board Of 18Mm Thickness For Carcase And Shutters With 12Mm Thick Back Panel And Drawer Bottom. 2Mm Edge Banding Matching The Laminiate Selected, Including All Necessary Fixing Arrangement, Glues, Screws, Magnetic Catchers, Handles, Flush Handles For Drawer In Wardrobe, Hinges, Telescopic Sliding Channel For Drawers, As Required. Colour May Vary As Per Approval Of Engineer-In-Charge.[94 Room X 18 Sqft = 1692 Sqft] , (B) Modular Kitchen , (I) Fabricating, Supplying, Installation, Fixing & Placing In Position The Entire Modular Kitchen Under Storage Counter (Height 850Mm) As Per Drawing. The Unit Comprises Of Cabinets, Shutters, Profile Handles, Accessories, Hardware, Glass Etc,. Basic Structural Framing With 18Mm Thick Prelam Hdhmr For Shutters And Carcase And Its Divisions And 12 Hdhmr For Back Panel And Bottom Panel Of Drawers As Mentioned In The Drawing, Edge Banding To Match The Color Of Selected Laminate, Including All Necessary Fixing Arrangement, Nails, Glues, Screws, Magnetic Catchers, Handles, Handles Of Required Lengths As Per The Width Of The Drawer, Shutter, Cabinet, Soft Closing Hinges And Soft Closing Innotech Sliding Channel For Drawers Along With Railings If Required, Fixing The Furniture To The Wall Or To The Floor As Required. All Works Like Fixing The Unit To The Floor Or Wall, Laminates Of Specified Thickness Complete,Other Required Hardware Are Included. Black Granite Countertop, Machine-Cut, Mirror Polished, And Neatly Grouted, Installed True To Level With Proper Support Structure. All Framework Intermittently For Support And Strength, All Details To Be Followed As Per The Drawings And Design Provided And Any Addition Required In Detail Should Be Incorporated In The Shop Drawing To Ensure Complete Functionality And Durability As Intended.All Hdhmr/Plywood And Board Will Be Both Sides Laminte. Nothing Extra Will Be Paid. All Cooridnation Works Based On Civil Dimensions, Integration Of Various Appliances For The Purpose Of Electrical Wiring Are To Be Considered In This Item. Appliances Like Chimney,Sink Etc To Be Paid Seperatly. Natural Stone Counter Top Stone Will Be Provided By The Client And Fixing Will Be Done By The Client Appointed Agency. However Coordination Will Be The Responsibility Of This Contractor. +B69 (Ii) Fabricating, Supplying, Installation, Fixing & Placing In Position The Entire Modular Kitchen Over Head Storage Counter (Height 600Mm) As Per Drawing. The Unit Comprises Of Cabinets, Shutters, Profile Handles, Accessories, Hardware, Glass Etc,. Basic Structural Framing With 18Mm Thick Prelam Hdhmr For Shutters And Carcase And Its Divisions And 12 Hdhmr For Back Panel And Bottom Panel Of Drawers As Mentioned In The Drawing, Edge Banding To Match The Color Of Selected Laminate, Including All Necessary Fixing Arrangement, Nails, Glues, Screws, Magnetic Catchers, Handles, Handles Of Required Lengths As Per The Width Of The Drawer, Shutter, Cabinet, Soft Closing Hinges And Soft Closinginnotech Sliding Channel For Drawers Along With Railings If Required, Fixing The Furniture To The Wall Or To The Floor As Required. All Works Like Fixing The Unit To The Floor Or Wall, Laminates Of Specified Thickness Complete,Other Required Hardware Are Included. All Framework Intermittently For Support And Strength, All Details To Be Followed As Per The Drawings And Design Provided And Any Addition Required In Detail Should Be Incorporated In The Shop Drawing To Ensure Complete Functionality And Durability As Intended.All Plywood And Board Will Be Both Sides Laminte. Nothing Extra Will Be Paid. All Cooridnation Works Based On Civil Dimensions, Integration Of Various Appliances For The Purpose Of Electrical Wiring Are To Be Considered In This Item. Appliances Like Chimney,Sink Etc To Be Paid Seperatly. Natural Stone Counter Top Stone Will Be Provided By The Client And Fixing Will Be Done By The Client Appointed Agency. However Coordination Will Be The Responsibility Of This Contractor. Colour May Vary As Per Approval Of Engineer-In-Charge. , I) King Size Bed: The King-Size Bed Is Constructed Without A Storage Box And Features Robust Materials For Lasting Durability. The Frame, Including The Side Panels And Footboard, Is Made From 18 Mm Thick Pre-Laminated Engineered Wood With A Melamine Finish, Offering A Clean, Wood-Textured Look. The Mattress Base Is Fabricated Using 18 Mm Bwp-Grade Plywood, Fully Edge-Banded To Prevent Warping And Moisture Damage. The Overall Dimensions Of The Bed Are 2040 Mm In Length, 1980 Mm In Width, And 300 Mm In Height To The Base, Providing Ample Support For A Standard King-Size Mattress (1980 Mm × 1830 Mm). The Headboard Stands 800 Mm Tall And Is Divided Into Two Sections. The Lower Portion Is Made Of Laminated Board, While The Upper Section Includes A Cushioned Panel With 50 Mm Pu Foam, Upholstered In Stitched Premium Leatherette For Added Comfort And Aesthetics. The Entire Unit Features A Light Oak Melamine Finish To Match. The Bed Is Supplied In Knock-Down Condition With All Necessary Hardware, Including Cam Locks, Screws, Dowels, And Angle Brackets. Assembly Is Straightforward With Reinforced Metal Corners For Added Strength. , Ii) Side Table:The Side Table Is Constructed Using High-Grade Plywood And Finished In A Light Oak Melamine Laminate For A Clean, Natural Appearance. It Features A Compact Form With Overall Dimensions Of 400 Mm (Width) × 400 Mm (Depth) × 490 Mm (Height). The Unit Has Two Lockable Equally Sized Drawers, Both Equipped With Soft-Close Telescopic Channels For Smooth, Quiet Operation. The Design Incorporates A Handle-Less Front With A Finger-Pull Recess At The Top Edge Of Each Drawer For A Sleek And Minimalist Look. Both Drawers Are Lockable, Enhancing Functionality And Security For Personal Storage. The Surface Is Fully Laminated For Protection Against Wear And Easy Maintenance. , Iii) 06 Seater Dining Table— The Dining Table Shall Be Of Solid Sheesham Wood (Kiln-Dried And Chemically Treated) With Overall Dimensions 1500 Mm × 900 Mm × 760 Mm And A Tabletop Thickness Of Approx. 25 Mm; The Apron Shall Be 25 Mm Thick And Legs Shall Be 80–100 Mm Square In Section, All Joined Using Mortise-And-Tenon Or Equivalent Reinforced Joinery. A Clear Tempered (Toughened) Glass Top Shall Be Provided To Cover The Wooden Top: 10 Mm Clear Toughened Glass Is Recommended For This Size, With Machine-Polished Edges (Flat Polish Or Small Bevel) And Corner Radii For Safety. The Glass Shall Be Supplied Cut To Size For A Nominal 2–3 Mm Reveal From The Top Edge Of The Apron (Or As Directed), Packed Separately And Fitted On Site. Glass Fixing Shall Use Non-Marking Neoprene/Rubber Support Pads (Minimum 6 Pads Per Table) And Anti-Slip Silicone Adhesive/Dots To Hold The Glass In Place Without Damaging The Wood; Stainless Steel Decorative Clamps May Be Provided Where A Visible Fixing Is Required But Should Not Bear The Primary Load. Finish Of The Wood Shall Be A Low-Sheen Natural Polish Or Clear Lacquer; Table Shall Be Supplied Knock-Down With All Required Fasteners And Instructions For On-Site Assembly And Final Glass Placement. The Glass Top Protects The Wood From Scratches, Heat And Spills, Gives A Sleek Aesthetic, And Makes Cleaning Easier (Wipe With Standard Glass Cleaner While Avoiding Aggressive Solvents On Adjacent Wood Finish). Chairs 06 Nos — Each Chair Shall Be Of Solid Sheesham Wood, Finished To Match The Table’S Low-Sheen Polish, With A Slatted Backrest And Straight Legs. Seat Height Shall Be 450 Mm From Finished Floor Level. Seats Shall Be Cushioned With Medium-Density Foam And Fully Upholstered In Durable Synthetic Leather (Leatherette) In A Neutral Tone; Foam Shall Be Supported On A Plywood Board Beneath The Cushion. Chair Dimensions (Seat Width/Depth/Backrest Height) And Leg Sections Shall Be Robust To Match The Table And Shall Be Supplied Knock-Down With Necessary Assembly Hardware. Upholstery Shall Be Stain-Resistant And Maintainable (Spot Cleanable); Wood And Upholstery Care Instructions Shall Be Provided With Each Unit. , (Iv) Sofa Set , (A)Sofa Foyer One Seater Size In Mm - 880(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (B)Sofa Foyer Two Seater Size In Mm - 1460(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (C) Coffee Table The Coffee Table Measures 900 Mm (W) × 600 Mm (D) × 450 Mm (H) And Features A 10 Mm Thick Clear Tempered Glass Top And Shelf Supported On A Stainless Steel 202 Frame Made Of 40×40 Mm Square Tubes With A Mirror-Polished Finish. All Joints Are Argon-Welded, Ground, And Buffed For A Seamless Look. The Lower Glass Shelf For Additional Storage, And Rubber Pads Or Level Adjusters Are Provided At The Base For Stability And Floor Protection. The Table Combines Modern Design, Durability, And Elegant Finish, Making It Ideal For Offices And Reception Areas.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Arunachal Pradesh View Result →
19.
Defence #9864939 AOC
Tender For special Repair To Bldg No. P-18/01 To 07 (Jcos Md Accn) In Zone-I Area Under Ge Jaipur At Jaipur Mil Stn-- 1 Taking down cement plaster or cement lime plaster, any description on brick, stone walls or concrete surface of ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed 2 Raking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses walls or to stone on edge in floors etc built in cement or lime mortar& removing rubbish outside MoD land complete all as specified and directed 3 Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thickness (below or above ground level) complete all as specified and as directed 4 M&L for keyed pointing to random or polygonal rubble, uncoursed or brought upto courses inCM 1:4 on stonemasonry surfaces complete all as specified and directed. 5 M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick masonry surfaces or concrete surface of wall finished even and smooth without using extra cement complete all as specified and directed. 6 M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick masonry surfaces or concrete surface finished even and smooth without using extra cement complete all as specified and directed. 7 M&L rendering 15mm thick in CM 1:4 on stone masonry surfaces or on surface other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed. 8 M&L for rendering 15 mm thick in two layers, 1st layer 10 mm thick in CM 1:4 and IInd layer 5 mm thick in CM 1:4 incl mixing of WPC as per manufacturers instruction, on stone masonry surfaces or on surface other than fair faces of brick masonary, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.Note : WPC shall be measured and paid seperately 9 M&L rendering 5 mm thick in CM 1:3 as on concerete surface of ceilings finished even and smooth without using extra cement complete all as specified and directed . 10 M&L Dubbing out average 10 mm thick on irregular face of walls/ceiling floating/ setting coat in CM 1:4 all as specified and as directed 11 M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer over 2mm thick wall care putty to make smooth the surfaces incl rubbing all as directed by Engineer-in- Charge. 12 M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over one coat of primer over 2mm thick wall care putty to make smooth the surfaces incl rubbing all as directed by Engineer-in- Charge. 13 M&L for preparation of new plastered surfaces of walls and applying two coats of premium exterior emulsion weather proof paint (ready mix) of approve shade and tint using hand roller over one coat of primer over 2mm thick wall care putty to make smooth the surfaces incl rubbing all as directed by Engineer-in- Charge. 14 M&L for complete removal of existing treatment on walls and applying two coats of premium exterior emulsion weather proof paint (ready mix) of approve shade and tint using hand roller over one coat of primer over 2mm thick wall care putty to make smooth the surfaces incl rubbing all as directed by Engineer-in- Charge. 15 M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil bound distemper over 2 mm thick of wall putty complete all as specified and directed. 16 M&L for complete removal of existing treatment on ceiling and applying two coat of oil bound distemper after application of 2 mm putty and one coat of primer complete as specified and directed. 17 M&L for prepartion of keyed pointing to random or polygonal rubble and applying two coats of premium exterior emulsion weather proof paint (ready mix) of approve shade and tint using hand roller over one coat of primer complete all as specified and directed. 18 Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises complete all as specified and directed. 19 M&L for joint free coloured non skid ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed 20 M&L for joint free coloured non skid ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. 21 M&L for joint free coloured non skid ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement match the shade of tiles over and including 10 mm thick wall plaster in CM 1:4 complete all as specified and directed 22 M&L for joint free coloured non skid ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. 23 M&L for joint free coloured non skid ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement match the shade of tiles over and including 10 mm thick wall plaster in CM 1:4 complete all as specified and directed 24 M&L for coloured Glazed ceramic tiles 300 x 450 x 7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc,. set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specified and directed . 25 Demolition of stone slab and tiles of any description or thickness in floor aprons etc laid beded and pointed in any mortar complete all as specified and directed . 26 M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 15mm thick screed bed in CM 1:4 complete all as specified and directed. 27 M&L 18-20 mm thick kesaria Green marble (table rubbed & polished) in cooking platforms & edges in and like in CM 1:4 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed . 28 M&L for 20mm marble slab (machined polished) as in verticalpartitions, below kitchen cooking plat form and raised platform of kitchen complete all as specified and directed . 29 M & L 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in floors complete all as specified and directed. 30 M&L 15 mm thick screed bed or bedding layer in cement mortar 1:6for laying floor finishes /tiles /kota stone etc complete all as specified and directed. 31 M&L for machine cut kota stone slab flooring 20-25mm thick of size 550 x 550 mm in floor over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite polishing complete all as specified and directed . 32 M & L Machine cut kota stone slab flooring 20-25mm thick in single piece fixed in cupboard partion including rubbing and polishing complete all as specified and directed. 33 M & L machine cut kota stone slab 20-25mm thick on vertical surface of wall, riser, steps, skirting, dado and pillar etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10 mm thick cement plaster in CM 1:4 including rubbing and polishing complete all as specified and directed 34 M&L for Rounding to edges of stones slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed. 35 S & F in repair 18 mm thick WPC board one side white laminate and other side decorative as in kitchen cabinetsfixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick of matching colour on exposed surfaces of board fixed with polymaster adhessiveincluding trimming edges of edge band to true line of thicknesss of board by manual trimmer complete all as specified and directed. 36 S & F in repair 8 mm thick WPCboard one side white laminate and other side undecorative as in back of kitchen cabinets complete all as specified and directed. 37 S & F kitchen plain baskets of stainless steel size 17 x20 x 4 of grade SS-304 complete all as specified & directed.Make : Godrej, Hettich, KAFF 38 S & Fkitchen prerforated cutlery baskets ofstainless steel size 17 x20 x 4 of grade SS-304 complete all as specified & directed.Make : Godrej, Hettich, KAFF 39 S & Fkitchen cup & saucer baskets of stainless steel size 17 x20 x 4of grade SS-304complete all as specified & directed.Make : Godrej, Hettich, KAFF 40 S & Fkitchen plate baskets of stainless steel size 17 x20 x 6 of grade SS-304 complete all as specified & directed.Make : Godrej, Hettich, KAFF 41 S & Fkitchen grain baskets of stainless steel size 17 x20 x10 of grade SS-304 complete all as specified & directed.Make : Godrej, Hettich, KAFF 42 S & F stainless steel basket guide channels suitable for running basket as mentioned in items above of grade SS-304 complete all as specified & directed.Make : Godrej, Hindware, Lifetime, Hettich 43 S & F auto close hinges, stainless steel of grade SS-304, bright finish fixed complete all as specified.Make : Godrej, Hindware, Lifetime or equivalent 44 S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified & directed.Make : Godrej, Hindware, Lifetime or equivalent 45 S&F in repair sinks made of stainless steel 18 guage of grade SS-304, kitchen or labortory with plugs, washers and wastes pipe and coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to ipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. 46 Taking up or down 15mm steel tubing and connections including cleaning and refixing old steel tubing and connections in new or old positions (walls, ceiling and floor etc) incl new fittings complete all as specified and directed. 47 Taking up or down 20mm steel tubing and connections including cleaning and refixing old steel tubing and connections in new or old positions (walls, ceiling and floor etc)incl new fittings complete all as specified and directed. 48 S&F in repair 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or laid in floor including taking down old complete all as specified and directed. 49 S&F in repair 20 mm dia steel water tubing, galvanized, medium grade, with all fittings,fixed to walls and ceiling or laid in floor including taking down old complete all as specified and directed. 50 S&F in repairs 15 mm bore bib tap, fancy type, chromium plated cast copper alloy with cruth or butter fly handle, long body, screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. 51 Supply only pillar taps 15mm bore swan neck cast coper alloy CPfancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. 52 S&F in repair brass CP towel rail 20mm dia, D type 60 cm long between flanges complete all as specified and directed. 53 S&F in repair double soap dish, CP brass R typefixed to plugs with chromium plated brass screws complete all as specified and directed.. 54 S&F in repair brass chromium plated shower rose 125mm x 125 mmsize with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. 55 S&F in repair 15mm bore stop/angle valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed for iron pipes or for unions and fixed complete all as specified and directed. 56 S&F in repair PVC Connections 15mm size, 450mm long with PTMT nuts complete all as specified and as directed. 57 S&F in repair 20mm bore gun metal gate valve, screwed down high pressure with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed. 58 S & F in repair 15mm bore wall mixer, brass, chromium plated, fancy type, 3-in-1 for mixing hot & cold water, with L-bend pipe for connection to overhead shower, bright finish with three joints screwed the ends for iron pipeand plugging complete all as specified and directed. 59 S & F in repair 250 mm corner glass shelf with brass brackets incl chromium plated brass screws complete all as specified & directed. 60 S & F in repair vitreous china squatting pan, Orissa pattern, size 580 mm X 440 mm white with ‘P’ or ‘S trap, front or back inlet and integral foot rests, any pattern and including fixing bolt, connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed. 61 S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and to flushing pipe etc. incl trap set in cement concrete complete all as specified and directed. 62 S&F in repairs PVC valveless, syphonic action type flushing cistern, low level, 10 ltr capacity, white, with intel, ball valve, float and handle including brakects, 32 mm dia polyethylene of low or high density or PVC flushing pipe and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified & as directed. 63 S&F as in repair 15 mm bore two way bib tap, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 64 S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. 65 S&F in repairs vitreous china wash hand basin white flat back of size 550 x 400 mm excluding taps, waste pipe, chain & plug and porcelene stopper but including brackets /fastners, 32mm dia brass chromium plated waste coupling with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, cutting for and pinning in ends of brackets, including fixing of pillar tap complete all as specified and directed. 66 S& F 32 mm bore PVC waste pipe 75 cm long of approved make with 32mm dia connector suitable for WHB/sink complete all as specified and directed. 67 Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. 68 M&L for brick work with sub-class B bricks (old size), straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed 69 M&L for brickwork with subclass ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed. 70 M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed. 71 Dismantling of 100mm bore cast iron soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or fromtrenches, if required complete all as specified and directed. Note : The length shall be measured along the centre line including fittings and accessories). 72 Dismantling of 75mm bore cast iron soil / waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or fromtrenches, if required complete all as specified and directed. Note : The length shall be measured along the centre line including fittings and accessories). 73 S&F 110 mm UPVC(SWR) ventilation and rain water pipes (type A conforming to IS-13592) single socketed, in any length with rubber ring joints fixed to wallls with suitable size clamp complete all as specified & directed. 74 S&F 110 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints fixed to wallls with suitable size clamp complete all as specified & directed. 75 S&F 110 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified & directed. 76 S&F 75 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified & directed. 77 S&F 75 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints fixed to wallls with suitable size clamp complete all as specified & directed. 78 S&F 110 mm dia UPVC (SWR) junction single (Single Tee with access door) equal or unequal complete all as specified and directed. 79 S&F 110 mm dia UPVC (SWR) bends any radius with access door complete all as specified and directed. 80 S&F 75mm dia UPVC (SWR) junction single (Single Tee with access door)equal or unequal complete all as specified and directed. 81 S&F 75mm dia UPVC (SWR)bends any radius complete all as specified and directed. 82 S&F 75 mm UPVC (SWR) vent cowl complete all as specified and directed. 83 S&F 110 mm UPVC (SWR) vent cowl complete all as specified and directed. 84 S&F in repair PVC (SWR) 75 mm dia of outlet nahani trap/floor trap with grating including jointing with solvent cement complete all as specified and directed. 85 S& F in repair PVC (SWR) gully traps of size 125/110 setting and jointing with solvent cement complete all as specified and directed. 86 S & F in repair MS CP Grating doom 100 mm dia with or without waste hole complete all as specified and directed. 87 S & F in repair 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl 20mm dia ball valve high pressure of PTMT with polythene flynut and aluminium rodincl dismantling of old tank all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge. 88 Taking down shutters of any description exceeding 1 sqm and n.exc 2 sqm each and refixing after easying in the same opening complete as directed and specified. 89 Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. 90 Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. 91 Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed. 92 S&F 100x75mm, rebated, karoli stone chowkats with exposed faces close picked dressed, including 4 bolt holes `per upright, erected in position and bedded and pointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified & directed. 93 S&F 125x75mm, rebated, karoli stone chowkats with exposed faces close picked dressed, including 4 bolt holes `per upright, erected in position and bedded and pointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified & directed. 94 S & F for Solid wood grain printed PVC sheetdoor frame of size 50mm x 95mm made by joining 3nos. Heat bent PVC Sheet `C Channel of 5mm thickness of sizes 35mm x 30mm x 25mm & 40mm x 35mm x40mm & 25mm x 30mm x 35mm using solvent cement. The two side `C Channel shall be reinforced with M.S. tube of size 19mm x 19mm. All the three `C channel Shall be fixed to flat base of 5mm PVC sheet with solvent cement. The profile shall be mitre cut at two corners and joined by inserting 4nos. 150mm long brackets of 15x15mm M.S. Square tube inside the 19mm x 19mm square tubes & remain each of then with four screws as indicated in the drawing. 95 S&F for 35 mm thick Factory made solid EPS core PVC Moulded Door shutter, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design, consisting of frame made out ofMS tube 20 mm x 40 mm. The core panel shall consist of 25 mm thick high density EPS routed with design, sandwitched in between front side moulded prelam 2 mm thick Moulded PVC sheet on one face and 2 mm PVC sheet on other side. The shutter on all edges to be sealed with lipping of 10 mm (5mm x 2) thick x 25 mm wide PVC sheet on other side & 60 mmwide PVC sheet for lock lock rail side . the lipping shall be bonded to the 2 mm moulded / plain PVC sheet with solvant cement asas specified and shown in SSRand Particular specification & as directed. Note :- .(i) The PVC doors shall be fixed as per manufacturers instructionsand as directed 96 S & F 35mm thick flush shutters solid core construction with block board and plywood face panels,fixedwith approved adhessive incl lipping all round the edges of door as per manufacturers instructionscomplete all as specified and directed. 97 M&L for decorative laminate type-I, 0.9 mm thick, colour and pattern as approved fixed as in door shutters complete all as specified and directed. 98 S & F 35mm thick second class hardwood factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc divided into square , with plain, chamfered or rounded, mitred and rebated sash barsany numbers ,fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :-Glass/gauge shall be measured and paid for separately 99 S & F 35mm thick factory made partly gauzed and partly panelled skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- Supply of glass/gauge shall be measured and paid for separately 100 S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in window or door complete all as specified and as directed. 101 S &F Framed work such as door frame, grills, gratings, etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks with Angle, MS sheet Flat iron & similar work conforming to Fe 290 GDE -E-165complete all as specified and directed. 102 S & F SS(SS-304) butt hinges 150 mm size heavy weight and fixed complete fixed in stone choukats all as specified and directed. 103 S & F MS butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed. 104 S & F 250 mm long SS sliding door bolt with hasp, staple (bolt type) not less than 12 mm dia with & minimum of 6 bolts & nuts , 4 on bolt plate & 2 on staple plate complete all as specified and directed. 105 S & F 150mm size SS (grade-304) handles, cast moulded type fixed with screws complete all as specified and directed. 106 S & F SS (grade-304) barrel tower bolts not less than 12 mm dia of extruded section, 200mm long complete all as specified and directed. 107 S & F 75 mm long door stopper of stainless steel body with two number rubber shoes complete all as specified and directed. 108 S & F MS Helical door spring 150mm long including roller and roller plate complete fixed to angle iron chowkats as directed and specified. 109 S & F in repair pressed steel factory made cupboard shutter with frame of 1.25 mm thick and shutter 1 mm thick PBI sheet with 6 nos 3.15 mm thick and 100 mm long steel hinges, godrej patern locking arrangement incl 12 mm dia vertical rod incl spray painting in factory in wood finish pattern complete all as specified and directed 110 S&F in repair 25 mm dia SS (grade 304) drapery/curtain rod medium weight incl taking down old one with finials, brackets etc complete all as specified and directed 111 S&F SS (grade-304)brackets/ end brackets for holding 25mm dia drapery rod complete all as specified and as directed. 112 S&F SS (grade-304) Finials, fancy type of approved make and pattern suitable for 25mm drapery rod complete all as specified and directed. 113 M&L for prearation of new or previously untreated steel and iron surface of any description, over 10cm in width and girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide (zinc chrome) primer complete all as specified and directed. 114 M&L for preparation of new wooden or wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 115 M&L for preparation of old painted wooden or wood based surfaces of any description not otherwise described over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. 116 M&L providing cement concrete type B-1, 1:2:4 (using 20 mm graded aggregate) in lintels up to 1.5m clear span, cills, bed plates,coping, kerbs water trough & the like including weathering, slightly rounded or chamfered angles & throating complete as specified and directed 117 Demolition existing water proofing treatment includingPCC in roof covering/padding kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type upto mother slab of roof complete as specified and directed.incl removal all rubbish material outside of MoD Land 118 M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying average 40mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate)finished even & fair to cover negative slope complete as specified and directed 119 M&L screed plaster 10mm thick in cement mortar (1:4) on concrete surfaces of roof to receive water proofing treatment and finished the surface even and fair incl mixing of WPC as per manufacturers instruction complete all as specified and directed.Note:- water proofing compound paid seperately as supply only 120 Supply only integral water proofing compund ISI marked complete all as specified and directed. 121 Supply and laying water-based, single component UV resistant, elastomeric PU liquid water proofing coating, having SRI >109 with an elongation of >400% and tensile strength of 1.4 MPa as per ASTM D 412, 80 % Solid Content, shore A Hardness of min. 50 as per ASTM D 2240 using roller in four layer (Primer coat,First coat, Fibre reinforce mesh & final coat) providing 1.2 mm DFT as per manufacturers specifications and instruction complete all as specified and directed. Application:- (a) Surface to be treated shall be free from loose particle etc then apply first coat of liquid water proofing as a primer on the surface with diluting as per manufacture instruction and allow the surface to dry for min 10-12 Hr time period. (b) Apply Second coat of Liquid water proofing without dilution on the primed surface and allow time to dry the surface for min 10-12 hr. (c) Apply Fibre reinforce mesh as per manufacturers instruction (iii) Applying third coat of liquid water proofing without dilution over the fibre rei coat and Allow minimum 48 hours before subjecting the painted surface to service.Note : (i) Work shall be carried out through authorized applicator of manufacturers only(ii) Material shall be used as per technical data / instruction of manufacturer after written approval of garrison engineer before execution at site and contractor shall submit guarantee of roof treatment work for TEN years Make:- Asian Paint : PU Aqua, M/s STP LTD-Shaliurethane BTD, Berger : Elastoseal BTD, Fosroc : Nito proof as approved by GE 122 M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length.Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed. 123 M&L for PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. 124 S&F in repair 600 x 450mm bevelled edge mirror 5.5mm to 6mm thick selected quality glass flaw less,firmly mounted on 6mm thick commercial ply wood backing and fixed to wooden plug with chromium plated brass screw and cup washer complete all as specified and directed. 125 S & F in repair stainless steel kitchen plate rack of approved quality of overall minimum size 750 x 600 x 250mm with partitions for small/ large plates etc made out of stainless steel 24 gauge, fixed with rawl plug and CP steel screws complete all as specified and directed. 126 M&L Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape requried, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 127 ,---ditto--- all as per item No. 126 above but TMT bar 10 mm dia & over complete all as specified and directed . 128 M & L for providing precast cement concrete type B1 1:2:4 (using 20mm graded aggregate) in landing, cover slab (for man hole etc) chullah hood, chajjas, water troughs, mangers, shelves and similar articles with plain faces incl form work set in cement mortar 1:6 complete all as specified and directed. 129 Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description andin any positionnot otherwisespecifically provided for complete all as specified and directed. 130 M&L form work to chullah hoods, chajjas, troughs and similar items including edges finish with rough finish surface complete all as specified and directed. 131 M&L for RCC (nominal mix) 1:1.5:3 Type A1(using 20 mm graded stone aggregate ) as in Chhaja, roof projections etc.complete all as specified & directed.Note :- Reinforcement shall be measured and paid for separately. 132 Dismantling plain or corrugated steel / FRP sheeting any gauge, thickness complete all as specified and directed. 133 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. 134 S & F steel work in tubular trusses incl special shaped washer etc, complete using ERW or induction butt welded tubes conforiming to IS 1161-1979 graded St-240 complete all as specified and as directed. 135 S&F Mild Steel work in roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde E-250) qulaity A including fabrication, erraction and fixing complete all as specified and directed. 136 S&F pre painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers complete all as specified and directed. 137 M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and as directed. 138 M & L rubber moulded machine pressed precast concrete interlocking paver block, coloured, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with coloured cement and pigment laid over and incl 25mm thick sand cushion layer complete all as specified and as directed.Note : Sand for cushioning shall be included under quoted rates. 139 M&L for precast cement concrete 1:3:6, type C1 (using 20mm graded stone aggregate) solid blocks, exc 10 cm in width as in kerb stones and setting in cement mortar 1:4 incl necessary earthwork complete all as specified and as directed. 140 M&L for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators, Partition section with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 141 S&F Powder coated anodised aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge 142 S&F Galvanised mild steel cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples in window or door complete all as specified and as directed. 143 S &F 4.8mm thick tinted glass ordinary quality and fixed in aluminium beads in sqaures not exc 0.5 sqm in each pane complete all as specified and directed. 144 S&F powder coated (thickness not less than 50 micron) aluminum grill 6-8 mm thick of approved design aperture size 50mmx50mm of standard sections including F type aluminium snap beading screw complete fitted to aluminium frame section complete all as specified and directed. 145 Excavation in trenches not exc 1.5m wide and n exc 1.5m in depth, for foundation, etc or for shaft , wells, cesspits, manholes, pier holes, etc n. exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed. 146 ,---ditto--- all as per item No. 145 above but depth exc 1.5m but not exc 3m complete all as specified and directed. 147 Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft/ loose soil complete all as specified and directed. 148 Removing excavated material n.exc 50m & depositing where directed at a level n.exc 1.50m above the starting point in soil complete all as specified and directed. 149 Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) 150mm dia set in cement mortar complete all as specified and directed. 150 Supply & laying DWC pipe (Double wall corrugated ) of class SN-4, IS-16098 (Part –II) of size internal dia of 150 mm, laid in trenches and jointed complete with coupler, bend, Tee, reducer etc complete all as specified & directed .Note :Earth work shall be measured and paid seperately 151 Taking down carefully surface aluminum /copperpoint wiring, casing capping /PVC concealed conduit for (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and directed. 152 Taking down MCB distribution board with incoming and outgoing controls any make and capacity after disconnecting complete all as specified and directed. 153 Taking down light fittings of any type any make any capacity complete all as specified and directed. 154 Taking down carefully sub main wiring with PVC casing capping / PVC surface conduit and making good disturbed surfaces complete all as specified and directed. 155 M&L for point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable, single core, 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade of size not less than 20mm dia ISI marked ivory colour with all conduit fittings / fixing accessories concealed in wall/ roof/floor incl modular sunken GI metal boxes not less than 1.0mm thick moulding in wall and incl white modular cover plates with frame for mounting modular switches, sockets, fan regulators etc as required for one light /fan point controlled by one, one way switch 6 Amp complete all as specified and directed. 156 ,---ditto--- all as per item No. 155 above but for one bell point controlled by one bell push complete all as specified and directed. 157 ,---ditto--- all as per item No. 155 above but for one light point controlled by two, two way switch complete all as specified and directed. 158 ,---ditto--- all as per item No. 155 above but for one 3 pin 5 Amp socket outlet controlled by one switch on same board complete all as specified and directed. 159 ,---ditto--- all as per item No. 155 above but for one 3 pin 5 Amp socket outlet controlled by one switch on indepdendent board complete all as specified and directed. 160 M&L for point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable single core, 4 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade of size not less than 20mm dia ISI marked ivory colour with all conduit fittings / fixing accessories concealed in wall/ roof/floor incl modular sunken GI metal boxes not less than 1.0mm thick moulding in wall and incl white modular cover plates with frame for mounting modular switches, sockets, fan regulators etc as required for one 3 pin, 15amp socket outlet on independent board complete all as specified and directed. 161 S&F modular switch,6 Amps, one way, 240 volts, 1 module complete all as specified and directed. 162 S&F modular switch, 6 Amp, two way, 1 module AC 240 volts complete all as specified and directed. 163 S&F modular switch 16 Amps, one way, 240 volts, 1 module complete all as specified and directed. 164 S&F modular bell push, 6 Amp, 1 module complete all as specified and directed. 165 S&F modular socket, 6 Amps, 2/3 pin combined, 2 module AC 240 volts complete all as specified and directed. 166 S&F modular socket, 6/16 Amps, 2/3pin combined, 2 module AC 240 volts complete all as specified and directed. 167 S&F modular hum free electronic step fan regulator 120-280 volts of 120 watts capacity (socket type) including connecting up complete all as specified and directed. 168 S&F ceiling rose PVC polycarbonate isolated body, 3 terminals 230 Volt complete all as specified and directed. 169 S&F ceiling fan 1200mm sweep 50 Hz AC 230 votls, 5 star rated in white colour with BLDC fan motor, Min air delivery 210 CFM with service value 6.00 BEE, incl blade set, 0.45 mtr down rod, canopy set, rubber reel including 0.5 Sqmm three core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling and writing MES No. on fan body as required complete all as specified and directed. 170 M&L for sub main wiring with four run of 10 Sqmm single core, PVC insulated, unsheathed, FRLSH multistranded copper conductor cable alongwith one run of 10 Sqmm earth wire as earth continuity conductor (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non-metallic PVC conduit of 20mm dia, ISI marked, ivory colour with fitting / fixing accessories of suitable size as required including making connection as required complete all as specified and directed. NOTE - Four run of 10 sq.mm phase and neutral wire, One run of 10 sq.mm earth wire & One run of PVC conduit with accessories shall be measured as One length. 171 M&L for sub main wiring with two run of 6 Sqmm single core, PVC insulated, unsheathed, FRLSH multistranded copper conductor cable alongwith one run of 6 Sqmm earth wire as earth continuity conductor (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non-metallic PVC conduit of 20mm dia, ISI marked, ivory colour with fitting / fixing accessories of suitable size as required including making connection as required complete all as specified and directed. NOTE - Two run of 6 sq.mm phase and neutral wire, One run of 6 sq.mm earth wire & One run of PVC conduit with accessories shall be measured as One length. 172 S&F MCBs Distribution board SPN, 8 ways, powder coated CRCA steel sheet, degree of protection IP-43, IK-09 with reversible double door, 240V, recess mounted having insulated 200 amp tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, blanking plate in unused spaces as required, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs incl taking down old U/S DB complete all as specified and directed.Note : MCBs and MCB DB shall be of the same make. 173 S&F MCBs of B curve, single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked, 240Voltsincluding required wiring connections with copper lugs of suitable size provided in MCB DBs incl connection testing and commissioning complete all as specified and directed. 174 S&F MCBs of B curve, Double pole 10 to 32 Amps having breaking capacity 10 KA, ISI marked, 240Voltsincluding required wiring connections with copper lugs of suitable size provided in MCB DBs incl connection testing and commissioning complete all as specified and directed. 175 S&F LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 105 lumen per watt and total power consumption not more than 20 watt including driver.It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed.Make - Philips Cat part BN308C LED20S-6500 L120 PSU WH, Crompton Cat part CIS-305-40-57-SL-DP-NWH, Havells Cat no STOUTPLUS600BS20WLED840SPCWH. 176 S&F LED batten (0.6m) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 900 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 10 watt including driver.It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. 177 S&F LED bulk head light fitting 9 watt IP 66 & IK 09 with with pressure die cast aluminium housing & polycarbonate diffuser duly prewired connection with 0.75sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable complete all as specified & directed. 178 M & L Sand cushioning to under ground cable with screened and washed sand (non cohessive), 8 cm before laying cable and 15cm after laying and punned to 18cm after laying of cable complete all as specified and directed by Engineer-in-Charge.Note : Punned thickness shall be considered for payment purpose. 179 M&L for factory made unreinforced pre-cast concrete cable protection cover LV class type-I with size 250mm X 150mm X 40mm laid across the cable (i.e. width of cover along the length of cable) for UG cable protection on the top of the sand cushioning complete all as specified and directed. 180 S & F in repair 50 mm bore GI tubing light grade with all fittings, fixed to wall/ pole with suitable size MS clamp, nut, bolt, washer etc or laid under road crossing etc as reqd for protection of cable incl painting with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.Note : Cost of MS clamp, nut bolt, washer and GI fittings etc shall be inclusive in the quoted rates. 181 Dismantling and taking out UG cable any size and fixed in any position and removal from site complete all as specified and directed. 182 Supply, laying, jointing, testing & commissioning LT under ground cable XLPE insulated, screened PVC sheathed, galvanised steel strips or wire armoured, heavy duty electric cable with multi stranded aluminium conductor, 1100 volts grade cross sectional area 16sqmm, 2core confirming to IS:7098 (part-I), laid in trenches, ducts, pipes or fixed on poles or walls including all necessary clamps, nut, bolt, washers, saddle etc complete all as specfied and directed.Note : The cost of AI thimbles / lugs and cable gland etc is included in quoted raes. 183 M&L for earthing complete with galvanized steel earth plate electrode of size 60cmx60cmx6.0mm buried directly in ground, vertically to depth not less than 2.25mtr below normal ground level with top edge of the earth plate at depth not less than 1.5 metre below ground level surrounded from all sides with alternate layers of charcoal and common salt and connected to GI lead wire 4.0mm dia by means of GI bolts, nuts washers & check nuts electrode connected to main switch board or main control board or on poles or on transformer and GI pipe medium grade 20mm bore for watering, 40mm bore GI pipe medium grade for protection of GI wire upto test point including providing funnel and wire mesh GI frame and 10cm thick suitably reinforced RCC pit cover, PCC chamber pit with PCC (1:3:6) type C2 using 40mm graded stone aggregates complete including excavation and earth work in any type of strata, disposal of surplus soil to a distance not exceeding 50 mtr, all as specified ans shown in Electrical plate No. 3 of SSR Part-1, PCC pit shall be provided at least 50 cm away from the earth pit and not just on earth pit including testing on completion complete.(Note - GI lead wire size 4.0mm upto 7.5 m included in the item). 184 S&F in replacement fresh air fan of sweep 200 mm, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, 1200 RPM, copper winding incl making connections complete all as specified and directed. Note : Old U/S plastic fresh air fan shall be deposited to MES store yard 185 Taking down carefully exhaust fan 300mm sweep, metal body with louvers, fan motor and accessories complete and including minor repair and refixing the same after repairing at new or old location complete all as specified and directed. 186 Taking down carefully storage type water heater (geyser) 25 ltr capacity, any make, from clamp/bolts including disconnecting water and electric connection and re fixing the same and connecting up after cleaning of geyser and minor repair and replacement of damaged PVC connection, plug top etc complete all as specified and directed. 187 S & F in repair 20amp, single pole and neutral socket outlet, with 2 pole and earth, metal enclosed plug top in powder coated CRCA steel sheet enclosure recess mounted with chained matel cover for socket out let with and incl one single pole B curve MCB 20 Amps complete all as specified and directed. 188 M&L for clamp and back plates fabricated from steel sections conforming to Gde Fe 410-O or Fe 310-O including nuts, bolts, washer, drilling holes for bolts in any shape or size for fixing ceiling fan complete all as specified and directed. 189 M&L for taking out ceiling fan 1200/1400mm sweep 50Hz AC 230 volts, dismantling fan blade and refixing the same including minor repair and replacement of fan blade, down rod, nut, bolt and washer including 0.5sqmm thre core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling as required and writing MES No. on fan body complete all as specified and directed.Note :Material reqd for repairing shall be paid seperately as supply only 190 M&L for rewinding the motor of ceiling fan 1200/1400 mm of any type and make with super enamelled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete all as specified and directed. 191 Supply only ball bearing no- 6201 to 6204 for ceiling / exhaust fan etc. of any size and make as required with alignment of shaft and testing complete all as specified and directed. 192 Supply only AC film capacitor 2.5 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete all as specified and directed. 193 Supply only shaft of approved quality for ceiling fan / exhaust fan any make any type & size as required complete all as specified and directed. 194 M&L for painting of ceiling fan of any sweep and make with one or more coats of spray painting with best quality enamel paint of required colour and approved brand to give an even shade and polishing with rubbing compound and wax polish including cleaning of surface with detergent etc complete all as specified and directed. 195 Supply only rubber reel with a pair of clamp, nuts, bolts, split pins etc suitable for ceiling fan down rods of any size and make as required complete all as specified and directed. 196 Supply only PVC canopy suitable for ceiling fan of any size and make as required complete all as specified and directed. 197 Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule A/BOQ
Contract Date: Mar 19, 2026 Contract Value : ₹ 41.52 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Rajasthan View Result →
20.
Defence #9835139 AOC
Tender For Completion Of Incomplete Work For Provn Of Otm Accommodation (Ph-I Of Two Phs) At Panagarh Mil Stn Under Ge (P) Panagarh.; 1 Sch A Part -I (Building Works)Note:- This Sch is notpre-priced by MES and the pre-priced rate indicatedas Rs 0.00 under Col 5 signifies this fact only. 2 Completion of incomplete Building for signal unit with all fitting and fixtures etc. Complete all as specified and as shown on complete drawings. 3 Completion of incompleteBuilding for office accn/ Adm block with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 4 Completion of incomplete Building for JCO Mess and single living JCO accn with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 5 Completion of incomplete Buildingfor single living ORs accn / Dinning and cook house with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 6 Completion of incomplete Building for Storage Accn (Armouries)& Guard House alongwith hardstanding with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 7 Completion of incomplete Building for Store Room (General Authorisation) with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 8 Completion of incomplete ramp with all fitting and fixtures etc. Complete all as specified and as shown on drawings 9 Completion of incomplete Building for sentry post with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 10 Completion of incomplete Building for Ironing Room with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 11 Completion of incomplete Building for Meter & Switch House with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 12 Completion of incomplete Pump House/ UG water tank with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 13 Completion of incomplete RCC OHT Tankwith 18mtr staging with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 14 Completion of incomplete Incinerator with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 15 Completion of incompleteFlag mast with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 16 Completion of incomplete Alarm post with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 17 Completion of incompleteFire point with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 18 Completion of incomplete Refuse bin with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 19 Completion of incompleteDhobi ghat with all fitting and fixtures etc. Complete all as specified and as shown on drawings. 20 Lumpsum price worked out by the tenderer/ bidder for SITE CLEARENCE, AREA DEVELOPMENT, EARTH WORK AND EXCAVATIONas listed in Schedule ‘A’ Part-II on Serial Page No. __ 21 Lumpsum price worked out by the tenderer/ bidder for INTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-III on Serial Page No. __ 22 Lumpsum price worked out by the tenderer/ bidder for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-IV on Serial Page No. __ 23 Lumpsum price worked out by the tenderer/ bidder for ROAD/ PATH/ CULVERT as listed in Schedule ‘A’ Part-V on Serial Page No. __ 24 Lumpsum price worked out by the tenderer/ bidder for AREA DRAINAGE as listed in Schedule ‘A’ Part-VI on Serial Page No. __ 25 Lumpsum price worked out by the tenderer/ bidder for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-VII on Serial Page No. ___ 26 Lumpsum price worked out by the tenderer/ bidder for SECURITY FENCING AND GATE as listed in Schedule ‘A’ Part-VIII on Serial Page No. ___ 27 Lumpsum price worked out by the tenderer/ bidder for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-IX on Serial Page No. ___ 28 Lumpsum price worked out by the tenderer/ bidder for EXTERNAL ELECTRIC SUPPLYas listed in Schedule ‘A’ Part-X on Serial Page No. ___ 29 Lumpsum price worked out by the tenderer/ bidder for LIGHTENING PROTECTIONas listed in Schedule ‘A’ Part-XI on Serial Page No. ___ 30 Lumpsum price worked out by the tenderer/ bidder for RAIN WATER HARVESTING / RECHARGE PIT as listed in Schedule ‘A’ Part-XII on Serial Page No. ___ 31 Schedule ‘A’ Part-XIII (MISCELLANEOUS ITEMS)Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as Rs 0.00 under Col. 5 signifies this fact only. 32 M & L for mixing of Fly ash, Clinker & stone dust in proportion of 1:3:6 ( i .e10 %Fly ash, 30% Clinker and 60% Stone dust) laying , watering , ramming and compacting with vibratory roller to get min CBR value 8% and Dry density 97 % placed at required camber and gradient complete as directed .Note:Break down details of this Items is shown in Annexure ‘B’ in Schedule ‘A’ Notes. 33 (INTERNALELECTRIFICATION)Material and labour for point wiring with 1.5sqmm (nominal area) PVC insulated and unsheathed single core FRLS (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including concealed PVC rigid conduitheavy grade of adequet size dia with all fittings and accessories for modules switch/socket etc in metal flush box screws complete including PVC insulated and unsheathed FRLS (conforming to IS-694) single core multi strandedcopper conductor cable of size 1.5sqmm green colour as earth continuty conductor connected to common earth dolly for one light/ fan point / call bell point controlled by one, one way switch complete all as specified and as directed. 34 All as per Ser Item No 13.02 here-in-above but for one ceiling/ exhaust fan point controlled by one switch complete all as specified and directed. 35 Material and labour for point wiring with 1.5sqmm (nominal area) PVC insulated and unsheathed single core FRLS (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including concealed PVC rigid conduitheavy grade of adequet size with all fittings and accessories for modules switch/socket etc in metal flush box modular with cadmium plated iron screws completeincluding PVC insulated and unsheathed FRLS (conforming to IS-694) single core multi strandedcopper conductor cable of size 1.5sqmm green colour as earth continuty conductor connected to common earth dolly for one 5/6 Amps socket outlet points controlled by one, one way switch on independent board complete all as specified and as directed. 36 All as per item No. 13.04 above but one 5/6amps socket outlet point on the same board with other switches complete all as specified and as directed. 37 All as per item No. 13.02 above but for one Point wiring controlled by two nos two switch complete all as specified and as directed. 38 Material and labour for point wiring with 4sqmm (nominal area) PVC insulated and unsheathed single core FRLS (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including concealed PVC rigid conduitheavy grade of adequet size with all fittings and accessories for modules switch/socket etc in metal flush box modular with cadmium plated iron screws completeincluding PVC insulated and unsheathed FRLS (conforming to IS-694) single core multi strandedcopper conductor cable of size 4 sqmm green colour as earth continuty conductor connected to common earth dolly for one15/16 Amps socket outlet points controlled by one, one way switch modular type on independent board complete all as specified and as directed. 39 Material and labour for point wiring with 1.5sqmm (nominal area) PVC insulated and unsheathed single core FRLS (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including concealed stove enameled steel conduit of adequet size dia with all fittings and accessories for modules switch/socket etc in metal flush box modular with cadmium plated iron screws completeincluding PVC insulated and unsheathed FRLS (conforming to IS-694) single core multi strandedcopper conductor cable of size 1.5sqmm green colour as earth continuty conductor connected to common earth dolly for one light/ fan point controlled by one, one way flame proof rotary type switch complete all as specified and as directed. 40 Supply and fixing switch flame proof rotary type with terminal box in LM6, 16 amps single pole 230 volts complete all as specified and as directed. 41 M & L for modular metal flush box 12 Module complete all as specified and directed. 42 M & L for modular white cover plate with frame, 12 module complete all as specifed and directed. 43 S & F for LED lamp 7 watt (retrofit) complete all as specifed and directed. 44 S & F LED type conical shape wall metal body with 1 no 7 Watt retrofit LED Lamp minimum lumen 700, complete all as specifed and directed. 45 S & F LED type table lamp / bed side light ( 3000k) Metal body 2 Watt minimum 50 lumen complete all as specifed and directed. 46 S & F telephone Socket (RJ-11) modular type complete all as specifed and directed. 47 S & F TV Socket modular type complete all as specifed and directed. 48 Supplying and fixing ceiling fan five star rated withBrush Less direct current (BLDC) 1200 mm sweep (without remote ) , 28 W complete withblades,down rod and accessories,230v,Min delivery 210 CFM with service value 6.00 BEE complete all as specified and as directed. 49 All as per Ser Item No 13.17 here-in-above but for 1400mm sweep, Minium air delivery 245 CFM with service value 6.00 BEE, five star rating with brushless direct current motor (BLDC) complete all as specified and directed. 50 Supplying and fixing exhaust fan made of sturdy Engineering plastic complete with lovers shutters, AC single phase, 230 V, 50 HZ , 1200 RPM, Copper winding, 250mm Sweep complete all as specified and directed. 51 Supplying and fixing exhaust fan noiseless square type metal body case , 450mm sweep heavy duty single phase (1400 RPM) ISI marked with blades flush mounting withlouvers, AC single phase 230/240 volts, 50 Hz including necessary fixing accessories and make good of surfaces complete all as specified and as directed. 52 Supplying and fixing sheet metal enclouser for Vertical DBS Triple pole and neutral 6 way double door 415 Volts when MCCB 4 Pole to be used as incommer complete all as specified and as directed. 53 Supplying and fixing sheet metal enclouser for Vertical DBS Triple pole and neutral 8 way double door 415 Volts when MCCB 4 Pole to be used as incommer complete all as specified and as directed. 54 Supplying and fixing sheet metal enclouser for Vertical DBS Triple pole and neutral 4 way double door 415 Volts when MCCB 4 Pole to be used as incommer complete all as specified and as directed. 55 Supplying and fixing MCCB 125 Amps, capacity 25kA, 4 pole, 415 volts (Adjustable thermal type & fixed magnetic setting) complete all as specified and as directed. 56 Supplying and fixing sheet metal enclouser for DBS Single pole and neutral 6 way double door with 200 Amps rated bus bar 240 Volt complete all as specified and as directed. 57 Material and labour for sub main wiring with two runs of single core 4 Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694), stranded,unsheathed1100 volts grade in PVC concealed rigid conduit (heavy grade) of not less than 20 mm diawith all fittings and conduit accessories concealed type including one run 4 Sqmm single core unsheathed stranded copper conductor cable FRLS (conforming to IS-694)as earth wire complete all as specified and as directed. {Note:-(i) Two runs of cable with one run earth wire and PVC conduit shall be measured as one unit length. (ii) Extra length of cable required for connection to DBs shall be deemed to be included in the unit quoted rate and shall not be measured separately. (iii) Earth wire shall run inside the conduit. (iv) Suitable color code of wire must be ensure for phase/ neutral/ earth.} 58 Material and labour for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694), stranded,unsheathed1100 volts grade in PVC concealed rigid conduit (heavy grade) of not less than 20 mm dia with all fittings and conduit accessories concealed type including one runs 6 Sqmm single core unsheathed stranded copper conductor cable FRLS (conforming to IS-694)as earth wire complete all as specified and as directed. {Note :-(i) two runs of cable with one run earth wire and PVC conduit shall be measured as one unit length. (ii) Extra length of cable required for connection to DBs shall be deemed to be included in the unit quoted rate and shall not be measured separately. (iii) Earth wire shall run inside the conduit. (iv) Suitable color code of wire must be ensure for phase/ neutral/ earth.} 59 Material and labour for sub main wiring with four runs of single core 6 Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694), stranded,unsheathed1100 volts grade in PVC concealed rigid conduit (heavy grade) of not less tha 25 mm dia with all fittings and conduit accessories concealed type including two runs 6 Sqmm single core unsheathed stranded copper conductor cable FRLS (conforming to IS-694)as earth wire complete all as specified and as directed. {Note :-(i) Four runs of cable with two runs earth wire and PVC conduit shall be measured as one unit length. (ii) Extra length of cable required for connection to DBs shall be deemed to be included in the unit quoted rate and shall not be measured separately. (iii) Earth wire shall run inside the conduit. (iv) Suitable color code of wire must be ensure for phase/ neutral/ earth.} 60 Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cm x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level,connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI or steel wire 4 mm dia as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation andearth work insoft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregatepit, funnel,20mm dia GI medium grade watering pipe, 15mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover 50mm thick made of RCC (1:1.5:3) type A1 duly reinforced with 8mm dia TMT bar @100mm c/c both ways, one lifting handle made out of 10mm dia TMT bar 250mm long embedded in cover slab and cover, wire, copper lugs etc mesh, chorcoal and common salt in alternate layer of 15cm thick including complete all as specified and directed. {NOTE:- (i) Each protection pipe and earth lead upto and including 7.50m length is deemed to be included in unit rate of of this item..} 61 (ROAD/PATH)M & L 225 mm thick (compacted thickness)wet mix macadam( WMM), with curshed stone aggregate and stone dust (as per design mix)of specifiedgrading, spread using mechanical paver as specified, watered, rolled & consolidated as specified to required gradient and camber complate all as specified & directed. 62 M&L for laying polythene paper black 150 micron with laps complate all as specified & directed. (Area for polythene paper without considering lap shall be measured and paid) 63 M&L and laying 150 mm thick (compacted thickness) wet mix macadam (WMM) with crushed stone aggragate of specified grading,spread using mechanical paver as specified, watered, rolled and consolidated as per required greadeant and camber complate all as specified & directed. 64 M&L for 100 m thick dry lean concrete (DLC) over a prepared subgrade with coarse and fine aggregate conforming to IS : 383, Size of aggregate not exc 40 mm (Grading and other parameters as per table 600 - 1 of MORTH, IRC SPR : 49 Specification) complate all as specified & directed. 65 M&L for cleaning and preparing the road surface and making good for road marking applying reflective thermoplastic white road marking paint (HOT APPLICATION) comforming to BIS 3262 laid down through modern propelled road marking machine in a layer of CRYSTALEX and use of all ingredients such as binder, glass, beads, titanium dioxide, calcium carbonate, interfiller thermoplastic required for glass beads per square meter by incorporating the white glass beads for reflectivity in 100mm width complete all as specified and as directed.Make of Thermoplastic Road marking paint/Retro-Reflective paint - M/s Asian Apcomark, M/s STP or M/s Shalimar Paints Ltd or M/s Berger Paints Ltd, M/s Jhonson & Nicholson Paints Ltd or M/s Jotun India Pvt Ltd. 66 (SEWAGE DISPOSAL)M&Lfor constrution of RCC Septic tankcoventional type designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 150 users Complete all as shown on drawing and as directed. 67 M&L for constrution Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4 M dia X 4.5 M effective depth Complete all as shown on drawing and as directed. 68 (EXTERNAL WATER SUPPLY) Design, supply, install, testing and commissioning Iron removal pressure feed type filtration plant 10000 GPH to with stand pressure 10 Kg/Sq cm with catalytic and filter media (as required size and grade / mesh to obtain potable water recommended parameters as per WHO) including MS frontal pipe (duly welded), Cocks, valves, (inlet outlet, back wash, rinse, bypass complete as per manufacturers instruction). Provision of main hole Hand hole strainer including air vent system, coagulant feeder with accessories, oxidation chamber with media, (MnO2) with all accessories suitable capacity with all fitting fixture, pressure gauges, RCC/PCC foundation as per OEM recommendation. Drainage system and connected to rising and delivery system including painting and writing complete. The technical details of Oxidation chamber and Multigrade filter are as given below:- 69 A) Oxidation Chamber- (i)Feed Flow - 40 M³/Hr. (ii) Operating pressure - 3.5 kg/cm². (iii) Max. allowable pressure drop - 0.5 Kg/cm. (iv) MOC of vessel - MS. (v) Frontal Pipeline Size - 150/100mm. (vi) Media type - Manganese-di-oxide. (vii) Thickness in mm (shell and dish-ends) - 6 mm. (viii)Media Quantity - 600 Kg. (B) Multigrade Filter- (i) Flow rate - 40 M³/Hr. (ii) Operating pressure - 3.5-5.5 kg/cm². (iii) Max. allowable pressure drop - 0.5 Kg/cm². (iv) Continuous duty cycle - 48 Hrs. (v) Backwash - 20 Min. (vi) Rinsing - 10 Min. (C) Filtering Media Details- (i) Media Type - Mixed sand. (ii)Depth of sand - 2800 Kg. (iii) Depth of Gravels support - 2000 Kg. (iv) Guaranteed life of filtering media - One year.(D) Vessels Details- (i) Type Cylindrical - Vertical. (ii)Dimension in mm (DIA X HOS) - 1600 X 2300 mm. (iii) Free board for back wash - 50%. (iv)Materials - MS. (v) Thickness in mm (shell and dish-ends) - 8-10mm. {Note:-- Rate deemed to be included with the followings:-(a)Raw water and treated water tested report of all parameter from National Test House Salt Lake. (b)Training to DEL Staff with required material and maintaining log book and other register as directed. (c) Electronic flow meter-01 including necessary wiring complete. (d)Butter fly and gate valves as required.(e) 2 Nos air compressor of capacity 210 CFM with 3 Phase Motor, Starter, air pipe connection including electrical connection complete. 70 Supply, install, lowering, testing & commissioning of submersible pump set 8 stage, suitable forminimum head 40 Mtr with 635 lpm dischage with electric driven motor of capacity 15 hp, 415 V AC, TP with operational efficeiency performance and durability wide voltage range 350-440 Volts, super finished water lubricated bush bearing, with less speed drop motors with reflon bearing and sand guard complete all as specified and directed by Engr-in-charge. 71 Trail drilling of bore of size 250 mm dia upto 120 mtr depthby direct rotary/ DTHmechanical system for injection wellin any kind of soil strata including hard stone/boulders and submitting the strata detail both graphically recorded as well as strata results including testing of yield , complete all as specified and as directed. 72 Reaming of bore well from 250 mm dia to 525 mm dia hole in three steps from 250 mm to 350 mm, 350 mm to 450 mm and 450 mm to 525 mm dia bore siutable for lowering ERW Mild steel casing pipes and gravel packing for the required length (i.e 50 mtr depth) below the ground level , complete all as specified and as directed. 73 All as per item no 13.41 here-in-before but exceeding 50 mtr and upto 170 mtr depth, complete all as specified and as directed. 74 Supply, assembling, lowering and fixing in position 250 mm nominal (10) bore ERW MS housing pipe, ISI marked,of 8 mm wall thickness, screwed and socketed in random length upto 6 mtr including fitting of centralizer at regular interval into bore hole to a depth upto 40 mtr from ground level, as per IS 3589, painted both inside and outside with black bituminous paint suitable for drinking water purpose including necessary fittings & fixtures by jointing electric Arc welding , complete all as specified and as directed. 75 Supply, assembling, lowering and fixing in position 200 mm nominal (8) bore ERW MS housing pipe, ISI marked,of minimum 8.0 mm wall thickness, screwed and socketed in random length upto 6 mtr including fitting of centralizer at regular interval into bore hole to a depth exceeding 40 mtr and upto 120 mtr from ground level, as per IS 3589, painted both inside and outside with black bituminous paint suitable for drinking water purpose including necessary fittings & fixtures by jointing electric Arc welding, complete all as specified and as directed. 76 Supply, assembling, lowering and fixing in position low carbon galvanized (LCG) steel strainer pipe 200 mm nominalbore of wall thickness 7.00 mm cagetype wire wound screen ‘V’ shaped profile in suitable length having slots of size 1.6 mm width including necessary end coupling,electric Arc welding as required and including special sockets for connecting to MS pipe, complete all as specified and as directed. 77 Supply and fixing mild steel reducer suitable for (250 x 200 mm ) bore casing pipe, 10 mm thick, fitted to casing pipe as per IS 2800 by means ofelectric Arc welding ,complete all as specified and as directed. 78 M&L for carrying out electro logging test upto complete drilling depth of tube well for fixing water strata and submitting of Report including its interpretation by a qualified Hydrologist/ground water expert , complete all as specified and as directed. 79 S&Fmild steel bail plug assembly suitable for 200 mm bore casing pipe internal threaded with strong iron hook, screwed and welded to casing pipe as per IS 2800 , complete all as specified and as directed. 80 Supply, filling and packing washed pea gravels of size 2 mm to 4.6 mm all around casing pipe and slotted pipe, complete all as specified andas directed 81 S&F mild steel housing clamps 1200 mm long 100 mm wide , made out of 20 mm thick MS plate made to shape for 250 mm bore casing pipe with necessary bolts, nuts and washers at ground level, complete all as specified and as directed. 82 Developing of tube well by means of air compressor, for number of hours, until sand free clear potable water is obtained including testing by using diesel engine driven turbine pump to get maximum yield and discharge including supply of yield test result , complete all as specified and as directed. (Note : The rates of DHPP is inclusive in the quoted rate) 83 S & F well cap made out of 5 mm thick MS Plate with provn of suitable holes for passing two runs of flat 3 core PVC insulated sumersible cable motor and one run of SWR, 100 MM dia column pipe and suitable for fixing 250 mm nominal bore ERW heavy duty MS of 8.0 Mm Wall thickness casing pipe complete all as specified andas directed. 84 S&F pressuregauge with isolation cock suitable for a working pressure of 7 Kg/cm² (Liquid based High Intensity), complete all as specified and as directed. 85 Supply and laying flat PVC insulated PVC sheathed copper couductor stranded submersible cable cores 1100 volt grade 10 Sqmm 3 core including jointing material and connection work , complete all as specified and as directed. 86 S&F round strand steel wire rope dia 12 mm and connected clamp nut bolts fixed ,complete all as per directed. 87 Supply , lowering and fixing MS column pipe 100 mm bore, medium grade, confirming to IS, 3 meter long pipe both end flanged, threading, welding and drilling of holes, cutting of ducts of size 10 mm x 20 mm 2 No. in each flange for fixing submersible cable, including rubber gasket of suitable size, nuts, bolts, washer etc including painted internally and externally with two coat of non corrosive non toxic bituminous paint including making all type of connections as required, complete all as specified and as directed. 88 Supply , install, testing and commissioning of cubical housing cabinet type weather proof powder coated LT panel board indoor type, platform mounted factory made, totally enclosed dust and vermin proofof CPRI approved,openablefrom both front and rear side made of2 mm thick CRCAMS Sheet and built upon suitable size angle ironframe work , having front and rear hinged doors, lifting lugs (2 Nos) , earthing strips at rear side , bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts , spring and washers. The cabinet and all members should be chemically treated with MSR solution for anticorrosive treatment and apply spray paint with two coats of synthatic enamel paint over a coat of red oxide primer. The panel should be suitable for 415 volts , 50Hz , 3 phase4 wire systemand internal connection should be provided with aluminium strips of suitable size and necessary foundation workand comprisingfollowing:- 89 (i) Aluminium Bus bar 160 Amps -25 KA breaking capacity(ii) Incoming MCCB, 4 pole, 100 Amps, 415 Volt AC, 25 KA rupturing capacityQty 1 No(iii) Outgoing MCCB, 3 pole, 32 Amps, 415 Volt AC, 10KA rupturing capacityQty 4 Nos(03 For submersible pump and 01 standby)(iv) Outgoing MCB 4 Pole 32 Amps, 10 KA, 240 Volts - 01 Nos(v) Star delta motor starter suitable for 15 HP motor pump - 03 Nos(vi) LED indicating lamps - 03 Nos(vii) Digital Volt meter (Size - 96 x 96mm) 0-500 Volts with selector switch - 01 No(viii) Digital Ammeter (Size96x96mm) With selector switch including CT ( 100/5Amp) with all connection- 01 No(xiv) Matering and accessories complete all as directed by Engr-in-Charge. 90 Supply, installation, commissioning and testing of 200mmsluice valveof cast iron body flangedconforming to IS-14816, PN-1.6 Non rising type spindle and hand wheel including all jointing materials such as nuts, bolts, washers, & fibre/ rubber gasket as required complete all as specified and as directed. 91 Supply, installation, commissioning and testing of 150mmsluice valveof cast iron body flanged conforming to IS-14816, PN-1.6 Non rising typespindle and hand wheel including all jointing materials such as nuts, bolts, washers, & fibre/ rubber gasket as required complete all as specified and as directed. 92 Material and labour for Construction of brick masonry valve pit of internal dimension 90 cm x 90 cm x 90 cm depth with fly ash brick in CM (1:4) and 10 mm thick plastering in CM (1:4), PCC (1:4:8) type D2 (Using 40 mm graded broken stone aggregate) as in foundation lean concrete, PCC (1:3:6) type CI (using 20 mm graded broken stone aggregate) as in bedding and copping including formwork MS frame with 50 x 50 x 6 mm angle iron 5 mmthick MS sheet cover plate with locking arrangements, hinges and two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface, three coats of white wash on plastered surface (exposed to view) including necessary excavation in soft loose, soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m complete all as specified and directed. 93 Material and labour for Construction of brick masonry valve pit of internal dimension 60 cm x 60 cm x 60 cm depth with fly ash brick in CM (1:4) and 10 mm thick plastering in CM (1:4), PCC (1:4:8) type D2 (Using 40 mm graded broken stone aggregate) as in foundation lean concrete, PCC (1:3:6) type CI (using 20 mm graded broken stone aggregate) as in bedding and copping including formwork MS frame with 50 x 50 x 6 mm angle iron 5 mmthick MS sheet cover plate with locking arrangements, hinges and two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface, three coats of white wash on plastered surface (exposed to view) including necessary excavation in soft loose, soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m complete all as specified and directed. 94 Supply, install, testing & commissioning of Centrifugal pump suitable for minimum, Discharge 635 LPM at 30 Mtr head with cast iron casing, bronze impeller, SS Shaft, electric driven motor of 10 HP, 415 V, TP suitable for under ground sump and install complete including PCC foundation as per manufacture instruction complete all as specified and directed. 95 Supply, install, connecting, testing & commissioning of high pressure single head adjustable chemical dozing system of the folowing specification : (a) Adjustable high pressure 100 PSIG Power input 230 V, 50 HZ, Max flow rate 02 US GPD to 40 US GPD with mandatory assecceries like lead tubing connecting ferrules, check valves, 170 ltr FRP solutin preparetion tank with lid, port hole, inlet/outlet/drain connection, level guage ete and fitted with 900 RPM motor PVC agitator combined with 100 ltr dosing tank lid port hole inlet/outlet/drain connection, level guage etc either fitted with 900 RPM moter and PVC agitator complete all as speficified and directed.Make : Any make of E-in-C approved or ISI Marked of any make as approved by Accepting Officer. 96 Supply and laying DI Pipe 200mm dia of class K-7 Spigot and socket type with and including titan joint gasket complete in any length laid in trenches complete all as specified and directored. 97 Supply and laying DI Pipe 150mm dia of class K-7 Spigot and socket type with and including titan joint gasket complete in any length laid in trenches complete all as specified and directored. 98 M&L DI Fittings bends (any type radius and angle) tapers any type, (straigth, bend, increasing, decreasing or double socket etc) Tee pieces single branch Y junctions double branch, cross (all sockets or socket and spigout ) collars, caps and plugs upto 300 mm bore complete all as specified and directored. 99 (EXTERNAL ELECTRIC SUPPLY)suply , installation and commissioning of compact secondary substation (CSS) 315KVA comprising to following parameters:-(a) Housing to made with conforming to the norms of CPRI, CRCA sheet steel housing 3.15mm thick with corrosion resistance and all side openable hinged door and lock and key arrangements.(b)Steel parts are tested as per IS 6988.(c)Engineered for smooth air flow for natural cooling.(d)No acces to high voltage parts.(e) GI strip earthing for lightening protection and lightening spike etc.(f)Separate earthing for lighrening protection and lightening spike etc.(g)Separation steel sheet wall for VCB/ Transformer/ LT Panel.(h) Heavy lifting lugs with all equipment load.(j) Slopped roof.(k) Necessary danger plates outside fo the CSS.(l) Necessary HT and LT cable / earth strips opening.(m)Necessary form work incl foundation as per OEM recommendation. 100 (n) Circuit Breaker (CB) in SF6 insulated stainless steel enclosure. commissioning of with metering module with necessary CTs adn PT, comprising the following :- (Complete unit is to be installed inside CSS, protection accessories, Enclosoure: Metal Clad, IP-54 Protection Relay : Self Powered Alfa neumatic LCD display type internal are tested for 1 sec, fully compartmentalized sheet enclosure with automatic sagety shutters, GI foundation bolts with provision of cable terminating facilities with powder coated smooth glossy finish and as per follows:(i) Rated Voltage - 12 KV(ii)Rated Frequency - 50 Hz.(iii)Rated continuous current rating - 630 Amps(iv)Impulse withstand voltage - 75 KV(v) Bus bar rating- 150% of continuous current.(vi)Operation: Spring closing mechanism- DC motor operated with 24 volt supply, Breaker Closing- manual & Electrical through TNC switch. 101 (vii)Shunt trip coil- 230 V, AC(viii) Safety interlock locking facility - Required(ix)Breaker panel indication - ON (RED)/ OFF (Green)(x) Accessories: Mechanical counter, space heater with thermostat, fuse adn ON/OFF switch, Aux relays for remote trip/ indication for PC interface etc, cubicle illumination lamp LED 9 watt retrofit type 230 V AC, T-N switch, anti pumping contractor etc.(xi) Mimic Diagram : An operating mimic diagram shall be provide on the front side of each cubicle(xii)Battery Bank with charger for SF 6 Circuit Breaker is included in the item rate and rating of battery as described by OEM.(Note : SF 6 Circuit Breaker complete will be obtained directly from the OEM and not from the authorised system assemblers of OEM.The installations, calibration and testing of CB will be conducted in the presence of authorised representative of OEM by the Contractor.) (o)Transformer 315 KVA Copper wounded dry resin cast distribution type 11/0.433 KV, 3 phase, 4 wire LT output 50 Hz DYN 11 suitable for indoor installation of load tape changer with step + 7.5% upto (-) 7.5% in step of 25.% on HT side all technical specification comprising to IS 11171 update version part with all necessary satndard fittings and accessories complete after necessary testing after completion with the following specification : (i) Standard KVA Rating- 315 KVA (ii)Primary Voltage - 11 KV AC(iii) Secondary Voltage - 433 Volts . 102 (iv)Neutral earthing should be solidly earth system (v) Rated Frequency - 50 Hz with + (-) 3% Tolerance (Note : All outgoing MCCBs should be adjustable thermal and magnetic protection and Ics = 100% Icu for all MCCBs). q) Necessary interconnections for HT and LT equipment with suitable size insulated copper bus bar.(r) Necessary foundation for installations of CSS. 103 Suply , installation and commissioning of Compact Secondary Substation (CSS) 250 KVA comprising to following parameters :-(a) Housing to bemade with Conforming to the norms of CPRI, CRCA sheet steel housing 3.15mm thick with corrosion resistance and all side openable hinged door and lock and key arrangements.(b)Steel parts are tested as per IS 6988.(c)Engineered for smooth air flow for natural cooling.(d)No acces to High voltage parts.(e) GI strip earthing for lightening protection and lightening spike etc.(f)Separate earthing for lightening protection and lightening spike etc.(g)Separation steel sheet wall for VCB/ Transformer/ LT Panel.(h)Heavy lifting lugs with all equipment load.(j) Slopped roof.(k) Necessary danger plates outside of the CSS.(l) Necessary HT and LT cable / Earth strips opening.(m)Necessary form work incl foundation as per OEM recommendation. 104 (n) Circuit Breaker (CB) in SF6 insulated stainless steel enclosure. commissioning of with metering module with necessary CTs and PT, comprising the following :- (Complete unit is to be installed inside CSS, protection accessories, Enclosoure: Metal Clad, IP-54 Protection Relay : Self Powered Alfa neumatic LCD display type internal are tested for 1 sec, fully compartmentalized sheet steel enclosure with automatic safety shutters, GI foundation bolts with provision of cable terminating facilities with powder coated smooth glossy finish and as per follows:(i) Rated Voltage - 12 KV(ii)Rated Frequency - 50 Hz.(iii)Rated continuous current rating - 630 Amps(iv)Impulse withstand voltage - 75 KV(v) Bus bar rating- 150% of continuous current.(vi)Operation: Spring closing mechanism- DC motor operated with 24 volt supply, Breaker Closing- manual & Electrical through TNC switch.(vii)Shunt trip coil- 230 V, AC(viii) Safety Interlock Locking facility - Required(ix)Breaker panel indication - ON (RED)/ OFF (Green)(x) Accessories: Mechanical counter, Space heater with Thermostat, Fuse and ON/OFF switch, Aux relays for remote trip/ indication for PC interface etc, cubicle illumination lamp LED 9 watt retrofit type 230 V AC, T-N switch, anti pumping contractor etc.(xi) Mimic Diagram : An operating mimic diagram shall be provide on the front side of each cubicle. 105 (xii)Battery Bank with charger for SF 6 Circuit Breaker is included in the item rate and rating of battery as described by OEM.(Note : SF 6 Circuit Breaker complete will be obtained directly from the OEM and not from the authorised system assemblers of OEM.The installations, calibration and testing of CB will be conducted in the presence of authorised representative of OEM by the Contractor.) (o)Transformer 250 KVA Copper wounded dry resin cast distribution type 11/0.433 KV, 3 phase, 4 wire LT output 50 Hz DYN 11 suitable for indoor installation of load tape changer with step + 7.5% upto (-) 7.5% in step of 2.5% on HT side all technical specification comprising to IS 11171 update version part with all necessary standard fittings and accessories complete after necessary testing after completion with the following specification : (i) Standard KVA Rating- 250 KVA (ii)Primary Voltage - 11 KV AC 106 (iii) Secondary Voltage - 433 Volts (iv)Neutral earthing should be solidly earth system. (v) Rated Frequency - 50 Hz with + (-) 3% Tolerance.(p)LT Panel for 250 KVA Transformer made with 2 mm CRCA sheet with necessary angle iron frame and vermin proof font side openable double door with necessary locing arrangement opening for bus bar / cable entry opening for natural air ventilation / cooling necesary Ammeter, Voltmeter, Selector switch, CTs , suitable size bus bar, paints and primer with Air Circuit Breaker (ACB) as incomer 630A, 50 KA, 415 V , AC, 50 Hz, 4 Pole with neccesary setting and microprocessor control draw out type bus bars, as outgoing MCCB 200 Amps, 35 KA - 02 Nos, MCCB 160 Amps, 35 KA - 02 Nos & 32 A MCB 4 Pole - 04 Nos. (Note : All outgoing MCCBs should be adjustable thermal and magnetic protection and Ics = 100% Icu for all MCCBs).(q) Necessary interconnections for HT and LT equipment with suitable size insulated copper bus bar.(r) Necessary foundation for installations of CSS. 107 Supply and fixing LED street light fittings on ploes capacity 45 Watts, high pressure die cast aluminum housing IP 66 rating front cover made of toughened clear glass, suitable for pole mounting wih bracket arm 40mm dia, Gl light grade pipe upto 1.4 m long, bend to required shape, clamp 40mmx6mm or required length including nuts & bolts fixed on steel poles complete all as specified.Model No : ENDURASUNDOWNSL45WLED765PASYBOTG of make : Havells or equivalent make as per Appendix D. 108 Supply & Fixing junction box with 3 Phase terminals and size of box 130mm x 180mm x 77mm or nearest higher size made of polycarbonate with IP 66/67 degree of protection, dust proof, water tight,shock proof, fire retardant,with internally embedded gasket fitted with heat treated bakelite for terminals block and PVC Glands for cable entry complete all as directed 109 M&L Three core 1.5sqmm(nominal area)service wire PVC insulated copper conductor FRLS, multi stranded, unsheathed 1100 volts grade IS-694 marked andfrom junction box to street light fitting through steel pole withPVC conduit & necessary clamps, bolts & nut etc required for fixing complete all as specified and directed. 110 Supply , install, testing and commissioning of cubical housing cabinet type conforming toCPRI approved LT panel board outdoor type, platform mounted factory made dust proof, weather proof powder coated totally enclosed dust and vermin proof openablefrom both front and rear side made of3.15 mm thick CRCAMS Sheet and built upon suitable size angle ironframe work , having front and rear hinged doors, lifting lugs (2 Nos) , earthing strips at rear side , bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts , spring and washers. The cabinet and all members should be chemically treated with MSR solution for anticorrosive treatment and apply spray paint with two coats of synthatic enamel paint over a coat of red oxide primer.The panel should be suitable for 415 volts , 50Hz , 3 phase4 wire systemand internal connection should be provided with aluminium strips of suitable size and necessary foundation workand comprisingfollowings :-System Voltage-415V, 3-Ph, 4 wire, 50 HZAluminium BUSBAR rating -200 Amps , cable entry (incomming and outgoing ) form bottom with cable gland Incomming : 125 Amps MCCB FP,35 KA, 415 Volts, 50 Hz-01 No (Incoming from CSS)Outgoing -(a) MCCB 4 pole 100 Amps 25 kA - 02 Nos (for signal unit and 1 standby)(b) MCCB 4 pole 16 Amps 25 kA - 2 Nos (For OFFR Living ,meter or switch house and and 01 No for street lights)(c)Timeswitches astro type 250V sigle phase of 20 Amp rating with contactor(d) Digital volt meter (size -96x96mm) 0-500 volts with selector switch -01 Nos(e) Digital Ammeter (Size 96x96mm) with selector switch incl CT (500/5 Amp) with all connection -01 No (f) LED indicating lamps -03 Nos 111 Supply , install, testing and commissioning of cubical housing cabinet type CPRI approved LT panel board outdoor type, platform mounted factory made dust proof, weather proof powder coated totally enclosed dust and vermin proof openablefrom both front and rear side made of3.15 mm thick CRCAMS Sheet and built upon suitable size angle ironframe work , having front and rear hinged doors, lifting lugs (2 Nos) , earthing strips at rear side , bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts , spring and washers. The cabinet and all members should be chemically treated with MSR solution for anticorrosive treatment and apply spray paint with two coats of synthatic enamel paint over a coat of red oxide primer.The panel should be suitable for 415 volts , 50Hz , 3 phase4 wire systemand internal connection should be provided with aluminium strips of suitable size and necessary foundation workand comprisingfollowing:- System Voltage-415V, 3-Ph, 4 wire, 50 HZAluminium BUSBAR rating -400 Amps , cable entry (incomming and outgoing ) form bottom with cable glandIncomming : 250 Amps MCCB FP,35 KA, 415 Volts, 50 Hz-01 No(incoming from CSS)Outgoing -(a) MCCB 4 pole 200 Amps 35 kA - 01 Nos (Adm buidling)(b) MCCB TPN 16 Amprs 25 KA-02 Nos (Guard house and standby)(c) Digital volt meter (size -96x96mm) 0-500 volts with selector switch -01 Nos(d) Digital Ammeter (Size 96x96mm) with selector switch incl CT (500/5 Amp) with all connection -01 No(e) LED indicating lamps -03 Nos. 112 Supply , install, testing and commissioning of cubical housing cabinet type CPRI approvedLT panel board Outdoor type, platform mounted factory made dust proof, weather proof powder coated totally enclosed dust and vermin proof openablefrom both front and rear side made of3.15 mm thick CRCAMS Sheet and built upon suitable size angle ironframe work , having front and rear hinged doors, lifting lugs (2 Nos) , earthing strips at rear side , bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts , spring and washers.The cabinet and all members should be chemically treated with MSR solution for anticorrosive treatment and apply spray paint with two coats of synthatic enamel paint over a coat of red oxide primer. The panel should be suitable for 415 volts , 50Hz , 3 phase4 wire systemand internal connection should be provided with aluminium strips of suitable size and necessary foundation workand comprisingfollowing:-System Voltage-415V, 3-Ph, 4 wire, 50 HZAluminium BUSBAR rating -600 Amps , cable entry (incomming and outgoing ) form bottom with cable glandIncomming : 315 Amps MCCB FP,35 KA, 415 Volts, 50 Hz-01 No(incoming from CSS)Outgoing -(a) MCCB 4 pole 125 Amps 35 kA - 03 Nos(02 Nos for OR Accomodation and 01 Nos standby)(b) MCCB 4 pole 63 Amps 25 kA - 01 Nos(JCO Accomodation and JCO Club) (c) MCCB 4 Pole 25 Amprs 25 KA - 01 Nos (Drying and ironing room)(d) MCCB TPN 16 Amprs 25 KA - 02 Nos (Street lights and one standby)(e) Digital Ammeter (Size 96x96mm) with selector switch incl CT (500/5 Amp) with all connection -01 No (f) Digital volt meter (size -96x96mm) 0-500 volts with selector switch -01 Nos (g) LED indicating lamps -03 Nos (h)Timeswitches astro type 250V sigle phase of 20 Amp rating with contactor 113 Supply, install, testing and commissioning of Automatic Power Factor Correction (APFC) panel board of aggregate capacity 15 KVAR suitable for working on 3 phase, 4 wire, 415 volts, AC, 50Hz, outdoor type, cubicle, floor mounted, free standing dust and vermin proof, air ventilation made out of 3 mm thick CRCA sheet duly powder coated, Manufactured shall be CPRI norms and as approved by GE, factory made.Panel board shall have front and rear opening with hinged type doors and rubber gasket, handles, industrial type locking arrangement, cable alleys, switch gear compartment, bottom cable, entry holes for incoming and outgoing cables, earthing terminals, danger notice plate, Aluminum bus bar duly covered with heat shrink sleeves of colour coded duly fixed on DMC / SMC insulators housed in a separate bus bar chamber including control wiring with PVC insulated, flexible, multistranded copper conductor cables of adequate size and of adequate length for connecting of capacitors, contactors etc duly ferruled crimped with suitable lugs / thimbles and including connecting of incoming and outgoing cables. Panel board shall be mounted on and including MS angle iron frame of suitable size duly painted and PCC1:2:4 type B1 for foundation / Platform to suit the site requirement complete all as specifiedand directed and comprising of following:-(i) APFC relay microprocessor based digital display type of 9 stages suitable for operation of PF upto unity – 01 No. 114 (ii) MCCB 320 Amps, 4 pole, 50KA, 415V, 50HZ – 01 No for incoming.(iii) MCCB 80 Amps, 4 pole, 25KA, 415V – 03 No’s for capacitor outgoing.(iv)MCCB 40 Amps, 4 pole, 25KA, 415V – 01 No for capacitor outgoing.(v)MCCB 16 Amps, 4 pole, 25KA, 415V – 05 Nos for capacitor outgoing(vi) MCB SP 0.5 to 5 AMPS, ‘C’ Curve, 240V-09 Nos as per circuit control.(vii) Capacitor Bank 2 KVAR, 3 phase, 440V MPP type including suitable rating contractor -05 Nos.(viii) Capacitor Bank 2 KVAR, 3 phase, 440V MPP type including suitable rating contractor -02 Nos.(ix) Capacitor Bank 1 KVAR, 3 phase, 440V MPP type including suitable rating contractor -01 Nos. 115 (x) LED indication lamps RYB – 01set.(xi) Auto / manual selector switch -01No.(xii) Push button and indication lamp for each capacitor bank -01 set.(xii) Digital voltameter with selector switch -01set.(xiv) Digital ammeter with selector switch & CT’s -01.(xv) Aluminium bus bar TPN 480 Amps rating -01 set.Note: The contractor should be factory inspection and drawings approval by the GE / Engineer-in-Charge before procurement after commissioning of APFC panel the power factor (PF) to achieve 0.95 to 0.99 mandatory at any load condition automatically. 116 Supply and fix solar street light smart integrated solar system all in one with MPPT (Maximum Power Point Tracking) charge controller ,Tilable LED Panel,Adjustable AIO mounting angle ,mono crystalline solar panel ,PIR motion sensor, and 6m tubular pole with 30 wattLED light at a rate 100 lm/w, 60wp, 75 AH (Lithium ferrous phosphate battery luminaries must have a life of greater than 50,000 hours and have IP 66 rating, the modules are to bedesigned to with stand corrosive atmosphere and heavy wind loads. the modules are to be certified for standers IEC 61215, IEC 61730 (Safely class I & II) complete all as specified and directed. 117 Supply and fix LED post top lantern decorative typeo fttings for 360 degreee indirect light on pillars of capacity 40 watts high pressure die cast aluminium housing IP 65 rating, suitable fr mounting 40 dia GIlight grade pipe upto 0.5 m long or required length including nuts and bolts and fixed complete all as specified and directed.Model No : RUBYPT40WLED757PSYMTOPC OF MAKE : Havels or equivalentmake as per Appendix D 118 M&L fpr boring holes horizontally under road without damaging the surface of road (minimum 1 mtr below the road surface/ footpath with the help of GI tubing not exceeding 100mm dia bore for passing of UG cable complete all as specified and directed. 119 (REFGIGERATION & WATER COOLER) Supply, installation, commissioningofrefrigerator single door, electric driven (single phase) 230V AC, 50 Hz, 308 - 315 ltrs capacity, conforming to IS 15750 (2006) for frost free, with power saver compressor with minimum BEE 5 star rating complete all as specified and as directed. 120 Supply, installation, commissioningofrefrigerator single door, electric driven (single phase) 230V AC, 50 Hz, 192 - 210 ltrs capacity, conforming to IS 1476 for direct cool with power saver compressor with minimum BEE 5 star rating complete all as specified and as directed. 121 Supply, installation, commissioning of Metal Top Deep Freezer single phase 240 volt, 50 Hzminimum capacity 320 ltrs, BEE 5 star rating complete all as specified and directed. 122 Supply, installation, commissioning of Metal Top Deep Freezer single phase 240 volt, 50 Hzminimum capacity 400 ltrs, BEE 5 star rating complete all as specified and directed. 123 Supply, installation, commissioning of Water cooler fullystainless steel, electric driven single phase having approx storage capacity of 80 Ltr and nominal cooling capacityof 40 Lts per Hour as per latest IS 1475 and BEE 5 star ratingcomplete all as specified and directed. 124 Supply, installation, commissioning of Water cooler fullystainless steel, electric driven single phase having approx storage capacity of 120 ltr and nominal cooling capacityof 60 Lts per Hour as per latest IS 1475 and BEE 5 star ratingcomplete all as specified and directed. 125 S & F Voltage stablizer of capacity 2 KVA for automatic operation, single phasewith neutral, air cooled indoor type and disign defore input Voltage variation between 170 Volts to 250 Volts with output Voltage stabiilized at 230 Volt with accuracy of + 2.5% complete all specified and director. 126 S & F Voltage stablizer of capacity 1 KVA for automatic operation, single phasewith neutral, air cooled indoor type and disign defore input Voltage variation between 170 Volts to 250 Volts with output Voltage stabiilized at 230 Volt with accuracy of + 2.5% complete all specified and director. 127 (DG SET) M&L Earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not lessthan 1.5 metres below normal ground level, connected tousing galvanised iron strip 32×6mm as earthing lead earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated by Engr-in-charge including testing on completion. 128 Supply and installation testing and commissioning silent Diesel Enginegenerating set 415 volts 40 KVA3 phase 0.8 power factor, 50 Hz, 1500RPM self exicited self regulated brushlessAC generator installed including AMF panel,suitable for ambient condition at Panagarh and confirming to condition under ISO 3046, IS:10001/ 10002,BS 5514/5000 with capacity of 10% overloading for one hour in every twelve hour duration and including the following accessories :- (A) Alternator:- Synchrounous alternator rated at 40 KVA suitable for continuous operation at 1500 RPM generating 415 volts at 0.8 p.f (lag) suitable for 50 Hz, three phase, 4 wire system.The alternator shall be brushless, single bearing, self excited/ self regulated with an AVR. The alternator will be suitable for climate and shall generally confirm to IS: 4722 :2001. The salient features of the alternators are :- (a) +-1% voltage regulation (max) in static conditions.(b) IP:23 protections with class H insulation.(c) Permanent lubricating bearing. 129 (B) Diesel Engine:- Adquate capacity of diesel engine water cooled to drive independently above alternator and after considering de-rating as per site conditions after generating and reducing power consumed by accessories directly coupled through flexible coupling multi cylinder multi stroke direct injection, cold starting 1500RPM, as per relevant IS/BS complete with standard accessories. (C)ACOUSTIC ENCLOSURE : Acoustic enclosure shall be powder coated and fabricated out of 16 SWG CRCA MS sheet. The silent (to comply GRIHA and other agencies norms) canopy shall be of nut bolt type construction. Critical processes of punching is done on CNC machines to maintain dimentional accuracy of holes within 0.1 mm.Powder coating is done after seven-tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE-RETARDANT foam as acoustic material & Rock wool for hot zone.Adequate hinged doors shall be provided to canopy, one door shall have glass window for control panel visibility (D) AMF panel : Automatic Mains Failure (AMF) panel made of CRCA sheet of 2 MM thick including necessary arrangement to install, testing and commissioning & connecting ot load cable to up ot changeover switch, suitable capacity of 4 pole MCCB complete all as per OEM recommendation.(E) Civil Works :- All civil works including PCC platform and related foundations incl for panel and equipments incl making goodof disturbed area during installation and commissioning of genset. The depth and size of the foundation and PCC as recommendedby the manufacturer. 130 (F) AMF Panel Specification shall be as per manufacture instruction.Note :-The contractor shall be arrange for artificial load resistive for testingof DG set at site and the cost is deemed to be included in the quoted ratesMAKES :- Make of engine : CUMMINS/KIRLOSKARGREEN/ASHOK LEYLAND/ GREAVES COTTON.Make of alternator : KIRLOSKAR GREEN / ALSTOM / CROPTON GREAVES /SIEMENS 131 Supply, erecting,testing aand commissioning of solar water heating system with heat exchanger for cold & warm regions respectively with solar evacuated tube collection conforming to IS : 12933 (Part - i ) with amdt No 1 and IS : 12933 (Part 2) /2003 suitable for inlet water with chlorine and fluorine content up ot 100 ppm and supply hot water at the outlet of 200 litters capacity with elctrical back up meeting specifications as under and comprising of followings :-Supply and fixing rotational moulded polyethylene water storage tank (Cylindrical Vertical with closed lockable top with lid and locking arrangement) hoisted and fixed in position all as specified in SSR Part -I of capacity 200 Litters complete for storage of cold water feeding to solar water heater, including staging made out of MS Angle iron 50x50x6 mm all as specified and directed at site by Engineer-in-Charge.Material :- Soalr water heating System : Comprising of solar Evacuated tube Collector, Collectors stand assembly.Staniless steel insulated hot water Storage tank with heat exchange and various other components . Solar evacuated tube collector component shall have :Evacuated tube collector component shall have : solar Evacuated tube collector cover plate made of toughened glass.Sheet for absorber made of copperAbsorber made of copper sheet and copper tube.the minimum thickness of Aluminium shall be as under:- (a) Channel section for sides 1.6mm (b) Sheet for bottom 0.7 mm (c) Support for glass retaining 1.2 mm sheet for entire body 1.0 m AbsorberAbsorber shall consist of riser, header and sheet for absorer. The diameter of header shall be 25.4 +/- 0.5 mm and thickness 0.71 mm. The Diameter of riser shall be 12.7 +/- 0.5 mm and thickness 0.56 and made of copper only. 132 S & F Hot water pipe duly insulated with glass wool and aluminium cladding 20 mm bore complete all as specified and directed. 133 Rain water Harvesting /Recharge PitS & F 150 MM perforated UPVC pipe with 20% Perforation complete all as specified and directed. 134 S & F 150mm bore PVC (SWR) vent cowl complete all as specified and directed. 135 M&L for hand packed gravel (Stone chips 12.50mm) for filling in bore holes and inside of recharge pit complete all as specified and directed. 136 Boring for 350 Mm Dia bore to a depth of 40 mtr in soil and getting out and disposal of spoil to a distance of 50 mtr using DMC method ( Direct mud Circulation) complete all as specified and directed. 137 GRIHA RATING FOR FOLLOWING BUILDING:-Minimum 3 star GRIHA rating shall be obtained for the following buildings which includes pre-certification and final ratings from approved aggency(a) OFFICER/ ADMIN BLOCK (b)SINGLE living JCOs ACCN(c) SINGLE living HAV/OR ACCN (T/S)Note :- 01The GBA (Green Building adviser) ofr obtaining GRIHA certification shall be approved by Accepting Officer.02. The GBA shall be responsible for all necessary actions for obtaining final GRIHA rating as per following guide lines:- (a) Pre-Cretification :-1. Submission of GRIHA per certification documents to certification agency as applicable immediately after the issue of Job/Work order.2. Analysis and suggest improvement/correction in the MEP/Other relevant drawings/documents and draft tender of the subject work for GRIHA star Rating (Min Three Star).3. Preparation, Submission & uploading all the documents in accordance with the GRIHA requirment, documentation shall be supported by drawings, test result quipment catalogues & calculations.4. Selection of equipment & material.5. To facilitate the planning team for selection of appropriate energy efficient & eco -friendly technologies, equipment & materials for the building e.g lighting system ,white goods, water treatment technologies, renewable energy, nontoxic paints, rapidlly renewable materials, recycled materials, ecofriendly materials etc.6. preparation of vendors & suppliers list for inclusion in the tender & working out specification of equiptment & materialto suit the GRIHA requirement. 138 7. Develop templates for GRIHA calculations to achieve certain points, this include materials related criteria, construction of waste management at site, energy calculation etc.8. conduct solar path analysis for each to achieve the best design ( shading device, Orientation etc.)9. Conduct solar path analysis for each fenestration to achieve the best design ( shading device, orientation etc)10 Perform day light analysis to ensure optimun condition achieved as per the guidelines provided by ECBC 2007.11. Perform day light analysis for window -wall ration, glass peropertiies (SHGC) & Providing recommendations to meet the compliance of ECBC 2007.12. Perform hourly calculation to show that thermal comfort condition as well as non-condition area are cachieved.13. Perform energy simulation to predict the energy performance of energy system in the bldg is less than the benchmarked energy perfomance as prescribed by GRIHA.14. Submit of ECBC compliance document to show that compliance fo mandatory requirment of ECBC are meet.15.Submission of draft specification to comply with relevant criteria of GRIHA for inclusion in tender documents.16. Liasoning and coordinating with GRIHA team for registration of project, uploading relevant document. Responding ot queries, observations, modification and corrections given by GRIHA team within specified time framed and reporting client with lates update.17. completion of all documentation requirement and formatlities before conclusion of main bldg. Contract and obtaining pre-certification with 3 or above star rating. 139 Final Rating:-Acquiring of Final Post GRIHA (minimum 3 star rating) certification approval from GRIHA including changes in drawings/ design during execution of work.Note:-The consultancy fees is inclusive of the following:-1. Pre-certification Registration Fees2. Certification registration Fees3. Site visit of GRIHA Official4. Site visit of GRIHA Official5. Third party EvaluatorPayment Schedule :-(i) 10% after pre-certification(ii) 50% at finalisation of specification(iii) 40% after obtaining GRIHA certification 140 Providing and fixing white vitreous china floor mounted water closet of size 360X640X685 mm of approved shape including providing and fixing vitreous china cistern with duel flush fitting, of flushing capacity 3 litre/6litre (adjustable to 4litre/8litre, including seat cover, and cistern fitting nuts, boltsand gasket etc complete all as specified and directed.Model No: SLS-WHT--6851P of make Jaquar of equivlent make/model as specified in Appendix D. 141 Providing and fixing white vitreous china wash basin for under counter mounting, specially fabricated brackets, painted whit, brass tap, 32 mm C.P. Wast, 15mm C.P. Brass self closing tap, connection pipe & rubber adopter for waste connection, complete including cutting and making food the walls, wherever requird complete all as specified and directed.Cat No : CNS_WHT_705 for wash basin ofmake Jaquar& Cat No PRS-031 for 15mm C.P brass tapof make Jaquar or equivlent make/model as specified in Appendix D. 142 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. Size 485 X 310 X 710 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitablebrackets all as per manufacturers specification and direction of Engineer-in-Charge.Cat No : URS-WHT-13255 of make of equivlent make/model as per Appendix D 143 Providing and Fixing of P.V.C waste Flexible pipe 40mm dia for sink and Urinal including PVC waste fittings complete including cutting and making good the walls, wherever required complete all as specified and directed 144 Providing and Fixing of P.V.C waste Flexible pipe 15mm dia for sink and Urinal including PVC waste fittings complete including cutting and making good the walls, wherever required complete all as specified and directed 145 Providing and fixing C.P. Brass angle valve 15mm dia for basin mixer and gyser pointsconforming to IS : 8931 complete all as specified and directedCat No FLR-CHR-5053N of make of equivlent make / model as per Appendix D. 146 Providing & fixing Liquid soap container of standard shape with bracket of the same material with snap fitting of approvedquality and colourcomplete all as specified and directedCat No : CAN-1135N of make of equivlent make / model as per Appendix D 147 Provinding & fixing Sink cock 15mm nominal bore of approved quality and colour complete all as specified and directedCat No : FLR-5347ND of make of equivlent make / model as per Appendix D 148 Provinding & fixingCP Brass Health faucet with 1.5M S.S Flexible Tube with wall hook including screw, Nut, bolts, cutting wall/floor and making good the same whatever required complete all as specified and directedCat No : ALD-CHR-583 of make of equivlent make / model as per Appendix D 149 Provinding & fixingCP Brass Bid cock Including wall fange, Connections, screws, nut, bolts, cutting wall/floor and makiing good the same whatever requiredcomplete all as specified and directedCat No : FLR 5037Nof make of equivlent make / model as per Appendix D 150 Provinding & fixing sink CP Wall mount double Robe Hookfixed to wooden cleats with C.P Brass screws, cutting wall/floor and making good the same whateverrequired complete all as specified and directedCat No : CAN-1161N of make of equivlent make / model as per Appendix D 151 Providing and fixing of straight type Macfit Single body push fit type WC pan connector with factory supplied srpring loaded seal guard of mcalpine, UK with integral single mould sealing fins made of flexible eva body, including bush/ adaptor for use with C.I pipe as supplied with the pan connecrtor complete all as specified and directed. Model : MAC 1 of make Macalpine of equivlent Model as approved by E-In-C or Accepting officer. 152 HOT WATER SUPPLYSupply, installation, commissioning and testing of water heater storage type, electric driven, capacity of 15 litres, single phase, 230V AC 50 Hz, closed type ISI marked vertical wall mounting, with steel body cover and Copper inner container, BEE 5 star rated. Complete with all accessorios such as safety valve thermostat connection pipe complete all as specified and directed. 153 Supply, installation, commissioning and testing of water heater storage type, electric driven, capacity of 25 litres, single phase, 230V AC 50 Hz, closed type ISI marked vertical wall mounting, with steel body cover and Copper inner container, BEE 5 star rated. Complete with all accessorios such as safety valve thermostat connection pipe complete all as specified and directed. 154 S&F CP Brass stop cock (concealed) of 100mm dia of standand design conforming to 15:8931 complete all as specified and directed. 155 Providing and fixing sound insulated PP piping system as per ON EN 1451 _ Part I-6 & EN 12056 part I-5 with 3 Layer pipe made of PP-C +PP-MV+PP-C in Blue Ral 5014 (Halogen and calcium free) colour, Push-fit type, food safe having high impact and stiffness, offering sound level of not more than 22dBA at a flow rate of 4 I/S and having pipe ring stiffness as per ISO/DIS 9969 and tightness as per EN 1277/B and C and DIN 19560 with all necessary fillings in blue colour, filled with factory fitted lip ring of make : Polyplast or equivalent make as approved by GE suitable for PP110mm dia Pipes complete all as specified and directed. 156 All as per item No 14.24 here-in-after but for PP 75mm dia pipes 157 All as per item No 14.24 here-in-after but for PP 40/50mm outer dia meter pipe (For wash basin etc) 158 Providing and fixing floor trap with minimum 50mm water seal with rubber seal on inlet to push fit hopper for indirect waste connection, 110mm inlet& 110m outlet long hight complete all as specified and directed. 159 Providing and fixing 110 X 50mm UPVC Floor Drain / Plain Floor trap complete all as specified and directed. 160 Providing and fixing SS Grating Over Floor Trap& Floor Drain 127 X 127mm complete all as specified and directed. 161 M&L concrete bed to drain pipe including packing under and lacking against the side of pipe after they are laid and tested with PCC (1:4:8) type D-2, for 110mm dia complete all as specified and directed. 162 All as per srl item No 14.30 here-in-after but for PP 40/50mm outer dia meter pipes. 163 S&F clean out cap plug (FCO/COP) for cleaning of same materials (POLO KAL NG) for PP 110mm dia complete all as specified and directed. 164 S&F 3-layer PPR-polypropylene random copolymer conceled pipes SDR 7.6 (PN-16) UV stabilized and antimicro bial fusion welded having thermal stability for hot and cold water supply all PP-R plain and brass threaded polypropylene random fitting for 50mm outer dia laid in trinches complete all as specified and directed.
Contract Date: Mar 17, 2026 Contract Value : ₹ 59.85 Crore
Statutory Bodies & Commissions/Committees No of Bidders 5
West Bengal View Result →
21.
Housing Urban and Rular Development #9786076 Price Bid
Tender For Mow/Deposit Work Under Jail-3 Sub Dn, Pwd Bhopal-1 1.2 Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre. 1.2.1 Lime, moorum, building rubbish 1.2.2 Earth 1.2.3 Manure or sludge 1.2.4 Excavated rock 1.2.5 Sand, stone aggregate below 40mm nominal size 1.2.6 Stone aggregate 40mm nominal size and above 1.2.7 Stone soling 1.2.8 Bricks 1.2.9 S.W. Pipes 1.2.9.1 100 mm dia 1.2.9.2 150 mm dia 1.2.9.3 200 mm dia 1.2.9.4 250 mm dia 1.2.9.5 300 mm dia 1.2.9.6 350 mm dia 1.2.9.7 400 mm dia 1.2.9.8 450 mm dia 1.2.9.9 500 mm dia 1.2.9.10 600 mm dia 1.2.10 R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and reinforced cement pipes 1.2.10.1 100 mm dia 1.2.10.2 125 mm dia 1.2.10.3 150 mm dia 1.2.10.4 200 mm dia 1.2.10.5 250 mm dia 1.2.10.6 300 mm dia 1.2.10.7 350 mm dia 1.2.10.8 400 mm dia 1.2.10.9 450 and 500 mm dia 1.2.10.10 600, 700, 750 and 800 mm dia 2 1.3 Add extra for every additional lead of 50 metre or part thereof. 1.3.1 Lime, moorum, building rubbish 1.3.2 Earth 1.3.3 Manure or sludge 1.3.4 Excavated rock 1.3.5 Sand, stone aggregate below 40mm nominal size 1.3.6 Stone aggregate 40mm nominal size and above 1.3.7 Stone soling 1.3.8 Bricks 1.3.9 S.W. Pipes 1.3.9.1 100 mm dia 1.3.9.2 150 mm dia 1.3.9.3 200 mm dia 1.3.9.4 250 mm dia 1.3.9.5 300 mm dia 1.3.9.6 350 mm dia 1.3.9.7 400 mm dia 1.3.9.8 450 mm dia 1.3.9.9 500 mm dia 1.3.9.10 600 mm dia 1.3.10 R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and unreinforced cement pipes 1.3.10.1 100 mm dia 1.3.10.2 125 mm dia 1.3.10.3 150 mm dia 1.3.10.4 200 mm dia 1.3.10.5 250 mm dia 1.3.10.6 300 mm dia 1.3.10.7 350 mm dia 1.3.10.8 400 mm dia 1.3.10.9 450 and 500 mm dia 1.3.10.10 600, 700, 750 and 800 mm dia 3 2.1 Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. 2 2.2 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 5 2.3 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 6 2.4 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. 2.4.1 beyond 30 cm girth up to and including 60 cm girth 2.4.2 beyond 60 cm girth up to and including 120 cm girth 2.4.3 beyond 120 cm girth up to and including 240 cm girth 2.4.4 above 240 cm girth 7 2.5 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil 8 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil 9 2.7 Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. 2.7.1 Ordinary rock 2.7.2 Hard rock (requiring blasting) 2.7.3 Hard rock (blasting prohibited) 10 2.8 Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (No extra lift is payable if work is done by mechanical means)Note:-Excavation of hard rock shall be the property of the contractor subject to recovery. excavated material has to shift from site within 15 days after instruction issued by Engineer-InCharge otherwise after this penalty will imposed on contractor at the rate of Rs 50 per cum per day 2.8.1 Ordinary rock 2.8.2 Hard rock (requiring blasting) 2.8.3 Hard rock (blasting prohibited) 11 2.9 Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil 2.9.1 Pipes, cables etc., not exceeding 80 mm dia. 2.9.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 2.9.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. 12 2.10 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). 13 2.11 Extra for excavating trenches for pipes, cables, etc., in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) 14 2.12 Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, depth up to 1.5 m including including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : 2.12.1 Ordinary rock : 2.12.1.1 Pipes, cables etc. not exceeding 80 mm dia. 2.12.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. 2.12.1.3 Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia 2.12.2 Hard rock (requiring blasting) 2.12.2.1 Pipes, cables etc. not exceeding 80 mm dia. 2.12.2.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 2.12.2.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia 2.12.3 Hard rock (blasting prohibited) 2.12.3.1 Pipes, cables etc. not exceeding 80 mm dia. 2.12.3.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 2.12.3.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia. 15 2.13 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) 16 2.14 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) 17 2.15 Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). 2.15.1 Depth not exceeding 1.5 m. 2.15.2 Depth exceeding 1.5 m but not exceeding 3 m. 2.15.3 Depth exceeding 3 m but not exceeding 4.5 m. 18 2.16 Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). 2.16.1 Depth not exceeding 1.5 m. 2.16.2 Depth exceeding 1.5 m but not exceeding 3 m. 2.16.3 Depth exceeding 3 m but not exceeding 4.5 m. 19 2.17 Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) : 2.17.1 Depth not exceeding 1.5 m. 2.17.2 Depth exceeding 1.5 m but not exceeding 3 m. 2.17.3 Depth exceeding 3 m but not exceeding 4.5 m. 20 2.18 Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be leftpermanently in position. (Face area of timber permanently left to be measured). 21 2.23 Extra rates for quantities of works, executed: 2.23.1 In or under water and/or liquid mud, including pumping out water as required. 2.23.2 In or under foul position, including pumping out water as required. Note: - The extra percentage rate is applicable in respect of each item but limited to quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. 22 2.24 Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 23 2.25 Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means) 2.25.1 All kinds of soil. 2.25.2 Ordinary or hard rock. 24 2.26 Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of this layer shall be 20 cm. 25 2.27 Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. 2.27.1 With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) 2.27.2 Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. 26 2.28 Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then refiling the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc., disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5m. 2.28.1 All kinds of soil. 2.28.2 Ordinary rock 2.28.3 Hard rock (requiring blasting) 2.28.4 Hard rock (blasting prohibited) 27 2.29 Supplying chemical emulsion in sealed containers including delivery as specified. (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) 28 2.30 Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 2.30.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.4 Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.5 Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. 29 2.31 Deduct for disposed soil not levelled and neatly dressed. 30 2.32 Preconstruction antitermite treatment to the building under construction by providing.Stage 1: Treatment should not be carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to fill up soil within the plinth area before laying the subgrade for flooring. 31 2.33 Making bore holes for providing dowel bars at designed depth in rock foundation by drilling 40 mm dia bore hole in rock including necessary bending hooking, in position and grouting with cement slurry etc. complete as per drawing and specification. (Steel to be paid separately). 32 2.34 Excavation in soil using hydraulic excavator and including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- section, and transporting to the appropriate ground contour, location and levelling and dressing earth neatly with all lifts and lead upto 1000 metre. 33 2.35 Earth work in rough excavation by any means and bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne in embankments for roads, flood banks, marginal bank and guide bank of filling up ground depression within campus, lead upto 50m and all lift. All kinds of soil. 34 2.36 Bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammers etc. and rolling every 3rd and top-must layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal bank and guide bank etc. lead upto 50m and lift upto 1.5m. All kinds of soil. 35 2.37 Deduct for not rolling with power roller of minimum 8 tonnes for bankingfilling excavated earth in layers not exceeding 20cm in depth. 36 2.38 Deduct for not watering with the excavated earth for bankingfilling 37 2.39 Providing and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm I.D.with inbuilt pressure compensation chip at every 30 cm interval in the tube,. The contractor shall submit approved line plan for piping system and junction boxes dully approved by Engineer-in- charge with bond of 5 year warranty. 2.39.1 Permanent piping system with Junction boxes 2.39.2 Anti-termite chemical injected area 38 2.40 Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (All kinds of soil) 39 3.1 Cement mortar 1:1 (1 cement: 1 sand) 40 3.2 Cement mortar 1:2 (1 cement: 2 sand). 41 3.3 Cement mortar 1:3 (1 cement: 3 sand). 42 3.4 Cement mortar 1:4 (1 cement: 4 sand). 43 3.5 Cement mortar 1:5 (1 cement: 5 sand). 44 3.6 Cement mortar 1:6 (1 cement: 6 sand). 45 3.7 Cement mortar 1:2 (1 cement: 2 stone dust). 46 3.8 Cement mortar 1:2 (1 cement: 2 marble dust). 47 3.9 White cement mortar 1:2 (1 white cement: 2 marble dust). 48 3.10 Cement mortar 1:5 (1 cement: 5 marble dust). 49 3.11 White cement mortar 1:3 (1 white cement: 3 marble dust). 50 3.12 White cement mortar 1:5 (1 white cement: 5 marble dust). 51 3.13 Mortar in lime , surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5 52 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : 4.1.1 With 20mm nominal size graded stone aggregate. 4.1.1.1 M-25 – Grade concrete 4.1.1.2 M-20 – Grade concrete 4.1.1.3 M-15 – Grade concrete 4.1.1.4 M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) 4.1.2 With 40mm nominal size graded stone aggregate. 4.1.2.1 M-15 - Grade concrete 4.1.2.2 M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) 4.1.2.3 M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate 4.1.3 With fly ash. 4.1.3.1 1:2:3½:9 (1 ordinary Portland cement : 2 Fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size) 4.1.3.2 1:2½:4:11 (1 ordinary Portland cement : 2½ fly ash : 4 sand : 11 graded stone aggregate 40 mm nominal size) Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. 53 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : 4.2.1 With 20mm nominal size graded stone aggregate 4.2.1.1 M-25 – Grade concrete 4.2.1.2 M 20 – Grade concrete 4.2.1.3 M 15 – Grade concrete 4.2.1.4 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 4.2.2 With 40mm nominal size graded stone aggregate 4.2.2.1 M-15 - Grade concrete 4.2.2.2 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 54 4.3 Centering and shuttering including strutting, propping etc. and removal of form work for : 4.3.1 Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. 4.3.2 above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. 4.3.3 Above plinth: Columns, pillars, posts and struts. 55 4.4 Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing . 4.4.1 M-15 (With 20mm nominal size graded stone aggregate) 4.4.2 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 56 4.5 Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement morta1:3 (1 cement : 3 sand) on exposed surfaces complete.(With 20mm nominal size graded stone aggregate) 57 4.6 Providing and fixing upto floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 sand) on exposed surfaces complete. 4.6.1 M-25 (With 20mm nominal size graded stone aggregate) 4.6.2 M-20 (With 20mm nominal size graded stone aggregate) 4.6.3 M-15 (With 20mm nominal size graded stone aggregate) 4.6.4 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. 58 4.7 Providing and fixing upto floor two level precast cement concrete solid block including hoisting and setting in position with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete : 4.7.1 M-15 (With 20mm nominal size graded stone aggregate) 4.7.2 M-10 (M 10) (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 59 4.8 Providing and Fixing upto floor two level pre cast concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete. 4.8.1 M-15 (With 20mm nominal size graded stone aggregate) 4.8.2 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. 60 4.9 Add extra for item no. 4.6, 4.7 and 4.8 above floor two level for every additional floor or part there of 61 4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). 62 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size). 63 4.12 Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer. 64 4.13 Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 65 4.14 Extra for concrete work in superstructure above floor two level for each floors or part thereof 66 4.15 Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.Note for item No. 4.15:- The quantity will be calculated by multiplying. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored. 67 4.16 Extra for laying concrete in or under foul positions. 68 4.17 Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.) 69 4.18 Extra for addition of synthetic polyester triangular fiber of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/ Water retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer-in- Charge. 70 4.19 Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. 71 4.20 Providing and fixing up to floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) 72 4.21 Providing and fixing up to floor two level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) 73 4.22 Providing and fixing up to floor two level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) 74 4.23 Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.Note : (1) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacemen to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC. 4.23.1 All works up to plinth level: 4.23.1.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.23.1.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.23.1.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 4.23.2 All works above plinth and upto floor two level 4.23.2.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.23.2.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.23.2.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 75 4.24 Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in- charge. 4.24.1 All works up to plinth level: 4.24.1.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.24.1.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.24.1.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 4.24.2 All works above plinth and upto floor two level 4.24.2.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.24.2.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.24.2.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 76 4.25 Plum Cement concrete 1:2:4 with 75% graded metal of maximum size 40 mm and 25% plum of 150mm size. 77 4.26 Providing and laying cement concrete in Sunken floors of WC, Toilet, Wash Area, etc with 1:5:10 (1 cement : 5 coarse sand (zone-3) : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering 78 5.1 Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.1 M-20 Grade Concrete 5.1.2 M-15 Grade Concrete 79 5.2 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: 5.2.1 M-20 Grade Concrete 80 5.3 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade. 5.3.1 M-20 Grade Concrete 81 5.4 Providing and laying upto floor two level reinforced cement concrete (with20 mm nominal size graded stone aggregate) in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with Concrete grade. 5.4.1 M-20 Grade Concrete 82 5.5 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in arches, archribs, domes, vaults, shells, folded plate above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in Concrete grade. 5.5.1 M-20 Grade Concrete 83 5.6 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in chimneys, shafts, upto floor two level excluding the cost of centring, shuttering, finishing and reinforcement with 5.6.1 M-20 Grade Concrete 88 5.7 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in well-steining excluding the cost of centering, shuttering, finishing and reinforcement with 5.7.1 M-20 Grade Concrete 84 5.8 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement in M 20 –Grade Concrete 85 5.9 Centering and shuttering in cluding strutting, propping etc. and removal of form for: 5.9.1 Foundations, footings, bases of columns, etc. for concrete upto plinth level 5.9.2 Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. 5.9.2.1 Uptoplinthlevel. 5.9.2.2 Above plinth upto 3.6 m height from plinth level 5.9.2.3 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. 5.9.3 Suspended floors, roofs, landings, balconies and access platform. 5.9.4 Shelves(Cast in situ) 5.9.5 Lintels, beams, girders, bressumers and cantilevers 5.9.6 Columns, P i l l a r s , Piers, Abutments, Posts and Struts. 5.9.7 Stairs, (excluding landings) except spiral- Staircases. 5.9.8 Spiral staircases (including landing). 5.9.9 Arches, domes,vaults upto 6m span 5.9.10 Extra for arches, domes, vaults exceeding 6 m span 5.9.11 Chimneys and shafts 5.9.12 Coffer/waffle slab of any size or shape as shown in the drawing. 5.9.13 Well steining 5.9.14 Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards. 5.9.15 Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). 5.9.16 Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. 5.9.17 Cornices and mouldings 5.9.18 Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. 5.9.19 Weather shade, Chajjas, corbels etc., including Edges. 5.9.20 Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works) 5.9.21 Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of S.E. in case of B&R works and from Additional Project Director in case of PIU works) 86 5.10 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof (Plan area to be measured) 5.10.1 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). 87 5.11 Providing, hoisting and fixing up to floor two level precast reinforced cement concrete in lintels, manhole cover, shelves and like including setting in cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with M 15 –Grade Concrete. 88 5.12 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 sand) etc. complete excluding plastering of the jambs, sills and soffits. 5.12.1 50 mm thick 5.12.2 40 mm thick 5.12.3 25 mm thick 89 5.13 Encasing rolled steel sections, in beams and columns, with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. 80 5.14 Encasing rolled steel section in grillages with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including centering and shuttering but excluding cost of expanded metal and hangers. 91 5.15 Extra for providing and fixing expanded metal mesh of size 20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages excluding cost of hangers. 92 5.16 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete .(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”) 5.16.1 Mild steel and Medium Tensile steel bars. 5.16.2 Hard drawn steel wire 5.16.3 Cold twisted bars (CTD) 5.16.4 Hot rolled deformed bars 5.16.5 Hard drawn steel wire fabric 5.16.6 Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 93 5.17 Add extra for providing reinforcement above Floor two level for every additional floor or part thereof. 94 5.18 Providing and fixing in position copper plate as per design for expansion joints. 95 5.19 Providing and filling in position, blown bitumen in expansion joints. 96 5.20 Providing and filling in position bitumen mix filler of Proportion 80 kg. Of hot bitumen, 1 kg. Of cement and 0.25 cubic metre of sand for expansion joints. 97 5.21 Providing and filling gap in expansion joint between RCC/ Stone/Ceramic tiles/Granite/ Marble by providing silicon sealant over backer rod of approved quality weather sealant as per drawing and direction of engineer in charge up to 25mm width & 12 mm depth. 98 5.22 Providing and fixing in position bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints. 5. 22.1 12 mm thick 5. 22.2 25 mm thick 5. 22.3 50 mm thick 99 5.23 Providing and fixing sheet covering over expansion joints with iron screws as per design. 5. 23.1 Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 5. 23.1.1 150mm wide. 5. 23.1.2 200mm wide. 5. 23.1.3 250mm wide. 5. 23.2 Aluminium fluted strips 3.15mm thick. 5. 23.2.1 150 mm wide. 5. 23.2.2 200 mm wide. 5. 23.2.3 250 mm wide. 5. 23.3 Stainless steel Grade 304 plate-1.0 mm thick 5. 23.3.1 150 mm wide. 5. 23.3.2 200 mm wide. 5. 23.3.3 250 mm wide. 100 5.24 Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. 101 5.25 Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete.Note- For Item No. 5.25:-The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub – soil water condition 102 5.26 Extra for laying reinforced cement concrete in or under foul positions. 103 5.27 Providing and laying in position machine batched, machine mixed cement concrete (BMC) of M-25 grade for reinforced cement concrete work using cement content as per approved mix design concrete without impairing strength and durability as per direction of Engineer-in charge and pumping of concrete to site of laying and finishing but excluding the cost of centering, shuttering, and reinforcement. (Note: - Minimum cement content is 330 kg/cum) and no extra payment for extra cement used as per mix design. 5.27.1 All works upto plinth level. 5.27.2 All works above plinth level and upto floor five level. 5.27.3 Add extra for each floor for all works above floor five level. 104 5.28 Extra for providing richer mixes of BMC design mix as per item no 5.27 upto plinth level and at all floor levels. (No extra payment for using extra cement as per requirement of mix design.) 5. 28.1 Providing M-25 grade concrete instead of M- 20 grade.(Note : minimum cement content is @ 330 kg/cum) 5. 28.2 Providing M-30 grade concrete instead of M- 25 grade.(Note : minimum cement content is @ 340 kg/cum) 5. 28.3 Providing M-35 grade concrete instead of M- 25 grade.(Note: : minimum cement content is @ 350 kg/cum) 5. 28.4 Providing M-40 grade concrete instead of M- 25 grade.(Note: minimum cement content is @ 360 kg/cum) 105 5.29 Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in M-20 –Grade Concrete (with graded stone aggregate 10mm nominal size. including provision of steel hooks for lifting and form work, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement. 106 5.30 Providing and laying in position ready mixed concrete (RMC) of M-25 grade for reinforced cement concrete work, using cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.Note: Minimum cement content is @ 330 kg/cum. (No extra payment for using extra cement as per requirement of mix design.) 5.30.1 All works upto plinth level. 5.30.2 All works above plinth level and upto floor V level. 5.30.3 Extra for each additional floor for all works above floor five level 107 5.31 Extra for R.C.C. work above floor two level for each floors or part thereof. (except items 5.27 and 5.30) 108 5.32 Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer’s specification and direction of Engineer-in-charge. 5.32.1 Non pigmented wet curing compound 5.32.2 Pigmented wet curing compound. 109 5.33 Providing and fixing in position factory made precast RCC M-40 doors, windows and ventilator frames having excellent smooth finish, as per IS: 6523 with 6mm dia main reinforcement each polymer block having at least four holes for passing one or adjacent rebates to hold fast grill or steel bar, ventilator frame provided with grooves for louvers at an angel of 45 degree at spacing to block direct vision etc. complete, as per the direction of Engineer-in-charge. The cost of hold fast and cement concrete block of 1:3: 6 (1 Cement: 3 sand: 6 Graded stone aggregate 20mm nominal size) mix is also included in the item. 5. 33.1. Frame 125 mmx 60 mm (double rebate) 5. 33.2. Frame 100mmx 60 mm (Single rebate) 5. 33.3 Frame 85mmx 60 mm (Single rebate) 110 5.34 Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 sand). 111 5.35 Providing and fixing in position pre moulded compressible filler board made from polymer base in black color approved make conforming to the specifications having minimum density of 95 kg / cum, non- staining, with less than 1 percent water absorption and compression recovery of 93 percent minimum including cost of double sided adhesive tape, sealant etc. in expansion joints. 5. 35.1 12 mm thick 5. 35.2 25 mm thick. 5. 35.3 50 mm thick. 112 5.36 Providing and sealing the retaining wall expansion Joints with anodized aluminum extruded section of 135 mm × 3.1 mm confirm to alloy of 6063 T5/T6including fixing of an imported EPDM moisture Barrier conform to (American Society for Testing and Materials) 2240 & ASTM - G53 & 84 fixing with Epoxy adhesive confirm to ASTM C-881 complete in all respect as per manufacturer Drawing and specifications. With 5 year guarantee. 113 5.37 Providing and fixing sheet covering over expansion joints with iron screws as per design. Non- asbestos cement bonded particle board 6 mm thick as IS: 14276 5.37.1 150mm wide 5.37.2 200mm wide 5.37.3 250mm wide 114 5.38 Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanical pulling arrangement like Rabbit/ Bed master including all accessories for Stressing &destressing operations as per approved make conforming to IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in- charge. 115 5.39 Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In- Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer - inCharge. (Material shall confirm to ASTM 6063). 5. 39.1 Floor Joint of 100 mm gap 5. 39.2 Floor Joint of 150 mm gap 5. 39.3 Floor Joint of 200 mm gap 116 5.40 Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). 5. 40.1 Wall Joint of 100 mm gap 5. 40.2 Wall Joint of 150 mm gap 5. 40.3 Wall Joint of 200 mm gap 117 5.41 Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centeringarragement support plates asper ASTM B221-02. . The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) 5.41.1 Roof Joint for 100 mm gap 5.41.2 Roof Joint for 150 mm gap 5.41.3 Roof Joint for 200 mm gap 118 5.42 Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) 119 6.1 Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not less than 40kg /cm2 and water absorption not more than 15% in foundation and plinth i/c curing etc. complete. 6.1.1 Cement mortar 1:4 (1 cement : 4 sand) 6.1.2 Cement mortar 1:6 (1 cement : 6 sand) 120 6.2 Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than 40kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete. 6.2.1 Cement mortar 1:4 (1 cement : 4 sand) 6.2.2 Cement mortar 1:6 (1 cement : 6 sand) 121 6.3 Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. 6.3.1 Cement mortar 1:4 (1 cement : 4 sand) 6.3.2 Cement Mortar 1:6 (1 cement:6 sand). 122 6.4 Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. 6.4.1 Cement mortar 1:4 (1 cement : 4 sand) 6.4.2 Cement Mortar 1:6 (1 cement:6 sand). 123 6.5 Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. 6.5.1 Cement mortar 1:4 (1 cement : 4 sand) 6.5.2 Cement Mortar 1:6 (1 cement: 6 sand). 124 6.6 Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. 6.6.1 Cement mortar 1:4 (1 cement : 4 sand) 6.6.2 Cement Mortar 1:6 (1 cement : 6 sand) 125 6.7 Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : 6.7.1 Having 100 kg / cm2 average compressive strength. 6.7.1.1 Cement mortar 1:4 (1 cement : 4 sand) 6.7.1.2 Cement mortar 1:6 (1 cement : 6 sand) 6.7.2 Having 75 kg / cm2 average compressive strength. 6.7.2.1 Cement mortar 1:4 (1 cement : 4 sand) 6.7.2.2 Cement mortar 1:6 (1 cement : 6 sand) 6.7.3 Having 50 kg / cm2 average compressive strength. 6.7.3.1 Cement mortar 1:4 (1 cement : 4 sand) 6.7.3.2 Cement mortar 1:6 (1 cement : 6 sand) 126 6.8 Brick work with calcium silicate bricks machine moulded conforming to IS:4139, having 100 kg/cm2 average compressive strength in super structure above plinth level upto floor II level in : 6.8.1 Cement mortar 1:4 (1 cement : 4 sand) 6.8.2 Cement mortar 1:6 (1 cement : 6 sand) 127 6.9 Brick work with extruded burnt fly ash clay sewer bricks (Conforming to IS: 4885 ) in foundation and plinth : Cement Mortar 1:4 ( 1 cement : 4 sand) 128 6.10 Brick work with extruded burnt fly ash clay sewer bricks (conforming to IS: 4885) in archesin foundation and plinth including centering and shuttering complete in cement mortar 1:3 (1 cement: 3 sand). 129 6.11 Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item. 130 6.12 Providing half brick masonry with well burnt chimney bricks in bull patent trench kiln manufactured by ghol process crushing strength not less than 40 kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level. 6.12.1 Cement mortar 1:3 (1 cement : 3 sand) 6.12.2 Cement mortar 1:4 (1 cement : 4 sand) 131 6.13 Providing half brick masonry with well burnt chimney bricks in bull pattern trench kiln crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level. 6.13.1 Cement mortar 1:3 (1 cement : 3 sand) 6.13.2 Cement mortar 1:4 (1 cement : 4 sand) 132 6.14 Providing half brick masonry with well burnt open bhatta bricks crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level 6.14.1 Cement mortar 1:3 (1 cement : 3 sand) 6.14.2 Cement mortar 1:4 (1 cement : 4 sand) 133 6.15 Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super structure above plinth and upto floor two level. 6.15.1 Having 100 kg/cm2 average compressive strength. 6.15.1.1 Cement mortar 1 : 3 (1 cement : 3 sand) 6.15.1.2 Cement mortar 1 : 4 (1 cement : 4 sand) 6.15.2 Having 75 kg/cm2 average compressive strength. 6.15.2.1 Cement mortar 1 : 3 (1 cement : 3 sand) 6.15.2.2 Cement mortar 1 : 4 (1 cement : 4 sand) 6.15.3 Having 50 kg/cm2 average compressive strength. 6.15.3.1 Cement mortar 1 : 3 (1 cement : 3 sand) 6.15.3.2 Cement mortar 1 : 4 (1 cement : 4 sand) 134 6.16 Extra for half brick masonry in superstructure, above floor two level for every floor or part thereof respective item. 135 6.17 Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of in half brick masonry. 136 6.18 Honey-comb brick work 10 cm thick with well burnt chimney bricks manufactured by ghol process crushing strength not less than 40kg /sqcm and water absorption not more than 15% in cement mortar 1:4 (1 cement : 4 sand). 137 6.19 Extra for forming cavity 5cm to 7.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. Ties 300mm long of 25x3mm section at not less than 3 ties per sqm as per approved design 138 6.20 Brick work in plain arches in superstructure including centering and shuttering complete with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 cement : 3 sand). 139 6.21 Brick work in gauged arches in superstructure in cement mortar 1:3 (1 cement : 3 sand) including centering and shuttering complete, with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% 140 6.22 Providing half brick masonry with kiln burnt clay bricks of 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 Cement : 3 sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm wide bitumen felt type 3 grade 1. 141 6.23 Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. 142 6.24 Extra for laying brick work in or under foul position. 143 6.25 Providing and laying cellular concrete blocks masonry having density ranging from 800kg/m3 in super structure above plinth level up to floor two level in cement mortar 1:4 (1 cement: 4 sand) The nominal dimensions of the concrete blocks shall be as follows in additional block shall be of half lengths of 200, 250 or 300 mm to correspond to the full lengths. The size of the blocks specified other than those specified may also be used. 144 6.26 Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry, using AAC blocks (Size length 300, 400, 500, 600 mm Height 200, 250, 300 mm Width 100, 150, 200, 250 mm) conforming to IS 2185 PART 3, having compressive strength not less than 4 MPa (Grade II) in super structure, blocks jointed with approved block laying polymer modified adhesive mortar as per ASTM international standard including raking out joints. Vertical bands shall be placed along jams (vertical member of chowkhats) and extend upto lintel levels to arrest cracking at corner openings. RCC bands shall be measured with AAC block masonry. Rates include all materials including steel bars, wastages, scaffolding and all labour etc. complete. 6.26.1 AAC Masonry in polymer modified mortar 145 6.27 Extra for AAC masonry work in superstructure above floor two level for each additional floor or part thereof 146 6.28 Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced roof slabs, lintels and chhajjas as per IS: 6073 -2006 grade D specifications (dry density, without steel, 550 kg/m3 to 650 kg/m3 and minimum compressive strength 3.5 N/mm2) reinforcement steel provided inside AAC slab, lintel and chhajja shall be ascertained on the basis of manufacturer’s certificate and also by random destructive testing done by engineer-in-charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Deflection & ultimate load test for AAC reinforced roof slab and lintel shall be as per annex. B of IS: 6073 -2006 and criteria for conformity and sampling shall be as per clause-13 of IS: 6073 -2006. 147 6.29 Precast autoclaved aerated concrete (AAC) reinforced wall panels:- Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced wall panels as per IS:6072 -1972 grade D (dry density, without steel, 550 kg/m3 to 650 kg/m3 and inside AAC panels. Quantity of reinforcement steel in AAC panels shall be ascertained on the basis of certificate of the manufacturer and also by random destructive testing by engineer-in- charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Cost of reinforcement inside AAC panels shall be paid separately. 148 6.30 Add extra for AAC wall panels, roof slabs, lintels and chhajjas above floor two level for each additional floor as per item no 6.29 and 6.30. 149 6.32 Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) 6.32.1 From ground level upto plinth level 6.32.2 Above plinth level upto floor II level 150 6.33 Brick work with modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) 6.33.1 From ground level upto plinth level 6.33.2 Above plinth level upto floor II level 151 6.34 Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor two level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 152 6.35 Extra for Gypsum panel Partitions in superstructure above floor two level for every four floors or part thereof. 153 7.1 Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : 7.1.1 Cement mortar 1:6 (1 cement : 6 sand) 154 7.2 Random rubble masonry with hard stone in superstructure above plinth level and upto floor two level, including leveling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. 7.2.1 Cement mortar 1:6 (1cement: 6 sand). 155 7.3 Extra for random rubble masonry with hard stone in superstructure above floor two level for every floors or part thereof 156 7.4 Extra for random rubble masonry with hard stone in : 7.4.1 Square or rectangular pillars 7.4.2 Circular pillars. 157 7.5 Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m. 158 7.6 Coursed rubble masonry (1st or 2nd sort) with hard stone in foundation and plinth. 7.6.1 Cement mortar 1:6 (1 cement : 6 sand) 7.6.2 Cement mortar 1:6 (1 cement : 6 sand) 159 7.7 Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor two level. 7.7.1 Masonry work (first sort) in cement mortar 1:6 (1 cement : 6 sand) 7.7.2 Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 sand) 160 7.8 Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above floor two level for every floors or part thereof 161 7.9 Extra for coursed rubble masonry with hard stone (first or second sort) in : 7.9.1 Square or rectangular pillars 7.9.2 Circular pillars. 7.9.3 Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m. 162 7.10 Stone work in plain ashlar masonry in super structure upto floor two level in cement mortar 1:6 (1 cement : 6 sand) including pointing with cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the sand stone shade : 7.10.1 One face dressed. 7.10.1.1 Red sand stone 7.10.1.2 White sand stone 7.10.2 Both face dressed. 7.10.2.1 Red sand stone. 7.11.2.2 White sand stone 163 7.11 Stone work plain ashlar masonry in arches in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. 7.11.1 One face dressed. 7.11.1.1 Red sand stone 7.11.1.2 White sand stone 7.11.2 Both face dressed. 7.11.2.1 Red sand stone. 7.11.2.2 White sand stone 164 7.12 Stone work plain ashlar masonry in domes, in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. 7.12.1 One face dressed 7.12.1.1 Red sand stone 7.12.1.2 White sand stone 7.12.2 Both face dressed. 7.12.2.1 Red sand stone. 7.12.2.2 White sand stone. 165 7.13 Stone work ashlar masonry punched (ordinary) in superstructure above plinth level and upto floor two level in cement mortar 1:6 (1 white cement: 6 sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. 7.13.1 Red sand stone one face punched. 7.13.2 Red sand stone both face punched 7.13.3 White sand stone one face punched. 7.13.4 White sand stone double face punched 166 7.14 Extra for stone work, plain ashlar or ashlar punched above floor two level for every floor or part thereof. 167 7.15 Extra for plain ashlar or ashlar punched in : 7.15.1 Square or rectangular pillars 168 7.16 Extra for stone work; plain ashlar or ashlar punched in curved on plan with a mean radius not exceeding 6 m. 169 7.17 Extra for additional cost of centering for arches exceeding 6m span including all strutting, bolting, wedging etc. And removal (area of soffit to be measured). 170 7.18 Stone work sunk or moulded or sunk and moulded upto floor Two level in cement mortar 1:6 (1cement : 6 sand) including pointing with white cement mortar 1:2 (1 white : 2 marble dust) with an admixture of pigment matching the stone shade : 7.18.1 Red sand stone 7.18.2 White sand stone 171 7.19 Extra for stone work sunk or moulded or sunk and moulded or carved in : 7.19.1 Triangular or Square or rectangular pillars 7.19.2 Circular or polygonal pillars 172 7.20 Extra for stone work sunk or moulded in cornices. 173 7.21 Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid for separately): 7.21.1 Red sand stone - exposed face fine dressed with rough backing. 7.21.1.1 70 mm thick. 7.21.1.2 60 mm thick. 7.21.1.3 50 mm thick 7.21.1.4 40 mm thick. 7.21.1.5 30 mm thick. 7.21.2 Red sand stone - Exposed face machine cut and table rubbed with rough backing. 7.21.2.1 70 mm thick. 7.21.2.2 60 mm thick. 7.21.2.3 50 mm thick 7.21.2.4 40 mm thick. 7.21.2.5 30 mm thick. 7.21.3 White sand stone - exposed face fine dressed with rough backing. 7.21.3.1 70 mm thick. 7.21.3.2 60 mm thick. 7.21.3.3 50 mm thick 7.21.3.4 40 mm thick. 7.21.3.5 30 mm thick. 7.21.4 White sand stone - Exposed face machine cut and table rubbed with rough backing. 7.21.4.1 70 mm thick. 7.21.4.2 60 mm thick. 7.21.4.3 50 mm thick 7.21.4.4 40 mm thick. 7.21.4.5 30 mm thick. 174 7.22 Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. 175 7.23 Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement :2 sand) including making the necessary chases in stone and holes in walls wherever required. 176 7.24 Providing and fixing stone dowels of size 10x5x2.5cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases 177 7.25 Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases. 178 7.26 Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 sand) including pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the stone shade: 7.26.1 Red sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. 7.26.2 White sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. 179 7.27 Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade: 7.27.1 Red sand stone 7.27.2 White sand stone 180 7.28 30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement: 4 sand) including finishing complete. 181 7.29 Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. 182 7.30 Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. 7.30.1 Red sand stone 7.30.2 White sand stone 183 7.31 Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1cement :3 sand) including pointing in white cement mortar 1:2 (1white cement: 2stone dust) with an admixture of pigment , matching the stone shade, jali slab without any chamfers etc. 7.31.1 Red sand stone 7.31.2 White sand stone 184 7.32 Extra for laying stone work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of stone work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. 185 7.33 Extra for laying stone work in or under foul position. 186 7.34 Wall lining butch work upto 10m height with red/ white sand stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 sand) i/c ruled pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in- charge. 187 7.35 Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 sand) and jointed with Cement mortar 1:2 (1 cement : 2 marble dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps which shall be paid for separately) 7.35.1 25mm thick Kota stone slabs exposed face dressed and rubbed. 7.35.2 25mm thick Dholpur stone slabs exposed face dressed and rubbed. 7.35.3 20 to 25mm thick kota stone slabs exposed slab not dressed and rubbed. 7.35.4 20 to 25mm thick Dholpur stone/shivpuri stone not dressed and rubbed. 188 7.36 Stone tile work with 8mm thick mirror polished and machine cut edge for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand), including pointing in white cement with an admixture of pigment to match the stone shade. 7.36.1 Granite stone of any colour and shade 7.36.2 Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble 189 7.37 Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. 190 7.38 Providing and fixing dry stone cladding upto 10 metre height with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and/ or with the help of cramps, pins etc. And sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins. shall be paid for separately.) 7.38.1 Red sand stone. 7.38.2 White sand stone 191 7.39 Providing and fixing structural steel frame (for dry stone cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/rectangular tube in the required pattern as per architectural drawing including including drilling necessary steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution).The frame work shall be fixed in true horizontal and vertical lines/ planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel clamps shall be paid for separately and nothing extra shall be paid.) 192 7.40 Providing and fixing adjustable stainless steel clamps of approved quality and of required shape and size adjustable with stainless steel nuts bolts and washer (total weight not less than 260 gms) for dry stone cladding fixed on frame 193 8.1 Providing and supplying aluminium extruded tubular and other aluminium sections frame work as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coated of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). 194 8.2 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of aluminium structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels.. (A) Structural analysis anddesign and preparation of shopdrawings for the specified designloads conforming to IS 875 partIII (the system must passed theproof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sectionsBfor fixing glazing panels of various thicknesses, aluminum cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage andprotection against fire hazard including (B) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentional movement for achieving perfect verticality and fixing structuralglazing system rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contactswith nuts and washers etc. of stainless steel grade 316, of the required capacity and in requirednumbers.(C) Providing and filling, two part pump filled, structural silicone sealant and one partweather silicone sealant compatible with the structural silicone sealant of required bitesize in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(D) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick andof sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight(E) Making provision for drainage of moisture/ water that enters the curtain glazing systemto make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary 195 8.3 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.8.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. 196 8.4 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. 197 8.5 Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non- combustible fibre glass wool insulation 50 mm thick having density 48 kg/m3, conforming to IS: 8183 and BS: 3958 Part 5.The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non- woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm/sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete. 198 8.6 Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., included in cost of relevent Item). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. 199 8.7 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel (ACP) Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. upto two decimal places. 8.7.1 4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick) 8.7.2 4 mm thick alumminium composite pannel material consisting of 3.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 8.7.3 3 mm thick alumminium composite pannel material consisting of 2.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 200 8.8 Design, supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as pr IS 875 (Part- III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider and other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete.For the purpose of payment actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured., 201 8.9 Providing and fixing aluminium magnesium alloy (FACADE) wall cladding system consisting of panels 200mm wide x 17mm deep x 0.5mm thick of maximum length of 6.0 mtr. coil coated on a continuous paint line double baked and roll formed from centre to centre at a distance of maximum 1.20 mtr. The stringer shall be fixed to a suitable rigid structure. All panels shall be achromatised for maximum bond between metal and paint, enamelled twice under high temperature one side with full primer and the other side (inner side) with a primer coat on a continuous paint line, and fixed as per the direction of the Engineer-in-Charge. 202 8.10 Providing and fixing Aluminium Magnesium alloy Plain Panel Sun Louvres of approved colour consisting of panel 84 mm wide x 16mm deep x 0.6mm thick with round edges panel length upto 6 mtrs coil coated on a continuos paint line double baked between metal and paint, enamelled twice under high temperature one side with full primer and finish, the other side (inner side) with a primer coat and Skin Coat on a Continuos Paint Line.Note: - 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. upto two decimal places. 203 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). 9.1.1 Second class teak wood 9.1.2 Sal wood 9.1.3 Kiln Head wood seasoned and chemically treated hard wood (Haldu, Kail, Bija wood.) 9.1.4 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. 9.1.4.1 Frame of size 100mmX60mm single or double rebate 9.1.4.2 Frame of size 120mmX60mm double rebate. 205 9.2 Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001(Part-B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately). 206 9.3 Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position ( with necessary stainless steel screw) 9.3.1 Sal wood 9.3.2 Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 9.3.3 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. 207 9.4 Extra for additional labour wood work in circular shape, such as in frames of fan light : 9.4.1 Second class teak wood 9.4.2 Sal wood 9.4.3 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.4.4 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. 208 9.5 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all complete as per direction of Engineer-in-charge. 9.5.1 Second class teak wood 9.5.1.1 35 mm thick shutters 9.5.1.2 30 mm thick shutters 9.5.2 Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 9.5.2.1 35 mm thick shutters 9.5.2.2 30 mm thick shutters 9.5.3 Kiln seasoned selected planks of sheesham wood. 9.5.3.1 35 mm thick shutters 9.5.3.2 30 mm thick shutters 9.5.4 Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood shutters 9.5.4.1 35 mm thick 9.5.4.2 30 mm thick 209 9.6 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: 9.6.1 Second class teak wood 9.6.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood 9.6.3 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. 9.6.4 Ply wood 5 ply, 9 mm thick : 9.6.4.1 Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. 9.6.4.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type 9.6.5 Ply wood 7 ply, 9 mm thick : 9.6.5.1 Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. 9.6.5.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type 9.6.6 Particle Board 12 mm thick 9.6.6.1 Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. 9.6.6.2 Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. 9.6.6.3 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. 9.6.6.4 Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. 9.6.6.5 Coir Veneer Board (conforming to IS 14842) 12 mm thick 9.6.7 Float glass panes 9.6.7.1 4 mm thick glass pane (weight not less than 10 kg/sqm) 9.6.7.2 5 mm thick glass pane (weight not less than 12.5 kg/sqm) 9.6.8 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading 9.6.8.1 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum 9.6.8.2 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum 210 9.7 Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in- charge and panelling with panels of: 9.7.1 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : 9.7.2 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- lamination conforming to IS : 12823 Grade 1, Type - II marked: 9.7.3 12 mm thick one side pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade -1, Type II marked: 211 9.8 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 9.8.1 Second class teak wood 9.8.1.1 35 mm thick 9.8.1.2 30 mm thick 9.8.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood 9.8.2.1 35 mm thick 9.8.2.2 30 mm thick 9.8.3 Kiln seasoned selected planks of sheesham wood. 9.8.3.1 35 mm thick 9.8.3.2 30 mm thick 9.8.4 Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood 9. 8.4.1 30 mm thick shutters 9. 8.4.2 35 mm thick shutters 212 9.9 Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B) , using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked fixing with M.S. pressed butt hinges bright finished of required size with necessary screws as per directions of Engineer-in- charge. 30 mm thick shutters. 213 9.10 Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 9.10.1 5 mm thick instead of 4 mm thick. 9.10.2 10 to 12 mm float glass 9.10.3 5.5 mm safety glass 9.10.4 10-12mm safety glass 214 9.11 Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). 215 9.12 Deduct for providing pin headed glass panes instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). 216 9.13 Extra for S.S, hinges providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). 217 9.14 Deduct for not providing hinges in doors, windows or clerestory window shutters with : 9.14.1 Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. 9.14.2 ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. 218 9.15 Providing and fixing 25 mm thick Second class teak wood shutters using 4mm float glass for cup board etc. : 9.15.1 Panelled or panelled and glazed shutters : 9.15.1.1 Using ISI marked anodised aluminium butt hinges with necessary screws. 9.15.1.2 Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 9.15.2 Glazed shutters : 9.15.2.1 Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. 9.15.2. 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 219 9.16 Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 9.16.1 12 mm thick 9.16.2 18 mm thick 220 9.17 Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 9.17.1 18 mm thick 9.17.2 25 mm thick 221 9.18 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 9.18.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.18.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.18.3 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. 222 9.19 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.19.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.19.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.19.3 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 223 9.20 Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. 224 9.21 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 225 9.22 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : 9.22.1 Rectangular or square. 9.22.2 Circular. 226 9.23 Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). 227 9.24 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). 228 9.25 Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm in both direction with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws: 9.25.1 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.1.1 Second class teak wood. 9.25.1.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.1.3 Kiln seasoned selected class of sheesham wood. 9.25.2 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.2.1 Second class teak wood. 9.25.2.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.2.3 Kiln seasoned selected class of sheesham wood. 9.25.3 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.3.1 Second class teak wood. 9.25.3.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.3.3 Kiln seasoned selected class of sheesham wood. 9.25.4 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.4.1 Second class teak wood. 9.25.4.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.4.3 Kiln seasoned selected class of sheesham wood. 229 9.26 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568 for doors, windows and clerestory windows including ISI marked M.S. pressed fixing with butt hinges bright finished of required size with necessary screws as per directions of Engineer-in-charge: 9.26.1 35 mm thick shutters 9.26.2 30 mm thick shutters 230 9.27 Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 sand) and making good the walls etc. 231 9.28 Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 9.28.1 25 mm long 9.28.2 32 mm long 9.28.3 40 mm long 9.28.4 50 mm long 9.28.5 60 mm long 232 9.29 Providing and fixing 2nd class teak wood plain lining tongued and grooved including wooden plugs complete with necessary screws and priming coat on unexposed surface. 9.29.1 40 mm thick. 9.29.2 25 mm thick. 9.29.3 20 mm thick 9.29.4 12 mm thick 233 9.30 Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre- laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 9.30.1 12 mm thick 9.30.2 18 mm thick 9.30.3 25 mm thick 234 9.31 Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 235 9.32 Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture. 236 9.33 Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. 237 9.34 Providing and fixing skirting of Pre- laminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 9.34.1 18 mm thick 9.34.2 25 mm thick 238 9.35 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 9.35.1 2nd class teak wood 9.35.1.1 50x12 mm 9.35.1.2 50 x 20 mm 9.35.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.35.2.1 50x12 mm 9.35.2.2 50x20 mm 239 9.36 Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : Second class teak wood. 240 9.37 Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked,, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. 241 9.38 Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842, including top cover of 6 mm coir veneer board, nickle plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. 242 9.39 Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. 9.39.1 Non decorative veneer on both sides. 9.39.2 Particle board with decorative veneering on both sides. 243 9.40 Providing and fixing teak wood lipping of size 25x3 mm in pelmet. 244 9.41 Providing and fixing of 1.25 mm thick chromium plated brass plate, with two chromium plated curtain rods brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 9.41.1 12 mm dia. 9.41.2 20 mm dia. 9.41.3 25 mm dia. 245 9.42 Providing and fixing nickel plated curtain rods M.S. pipe with nickel plated brackets : 9.42.1 20 mm dia (heavy type) 9.42.2 25 mm dia (heavy type) 246 9.43 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.43.1 Fixed to steel windows by welding. 9.43.2 Fixed to openings /wooden frames with rawl plugs screws etc. 247 9.44 Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. 248 9.45 Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. 249 9.46 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. 9.46.1 With 2nd class teak wood beading 62x19 mm. 9.46.2 With 12 mm mild steel U beading. 250 9.47 Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. 251 9.48 Providing 40x5 mm flat (iron hold fast 40 cm long) (0.628 kg) including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) 252 9.49 Providing wooden beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : 9.49.1 Sal wood. 9.49.2 Haldu, Kail, Bija wood. 253 9.50 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 9.50.1 125x65x2.12 mm 9.50.2 100x58x1.90 mm 9.50.3 75x47x1.70 mm 9.50.4 50x37x1.50 mm 254 9.51 Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete : 9.51.1 125x90x4.00 mm 9.51.2 100x75x3.50 mm 9.51.3 75x60x3.10 mm 9.51.4 50x40x2.50 mm 255 9.52 Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 9.52.1 125x65x2.12 mm 9.52.2 100x58x1.90 mm 9.52.3 75x47x1.70 mm 9.52.4 50x37x1.50 mm 256 9.53 Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete : 9.53.1 150x125x27x2.80 mm 9.53.2 125x125x27x2.80 mm 9.53.3 100x125x27x2.80 mm 9.53.4 75x100x20x2.24 mm 257 9.54 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 9.54.1 150 mm 9.54.2 125 mm 9.54.3 100 mm 258 9.55 Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 9.55.1 150 mm 9.55.2 125 mm 9.55.3 100 mm 259 9.56 Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete. 9.56.1 Overall width 35 mm. 9.56.2 Overall width 50 mm. 9.56.3 Overall width 65 mm. 260 9.57 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 9.57.1 300x16 mm 9.57.2 250x16 mm 261 9.58 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 9.58.1 250x10 mm 9.58.2 200x10 mm 9.58.3 150x10 mm 9.58.4 100x10 mm 262 9.59 Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete 263 9.60 Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 9.60.1 300x20x6 mm 9.60.2 250x20x6 mm 264 9.61 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 9.61.1 125 mm 9.61.2 100 mm 9.61.3 75 mm 265 9.62 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 9.62.1 150 mm 9.62.2 115 mm 9.62.3 90 mm 266 9.63 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 9.63.1 300 mm weighing not less than 200 gms. 9.63.2 250 mm weighing not less than 150 gms. 9.63.3 200 mm weighing not less than 120 gms. 267 9.64 Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 450 gms.) 268 9.65 Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete: 9.65.1 300x16 mm 9.65.2 250x16 mm 269 9.66 Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 9.66.1 250x10 mm 9.66.2 200x10 mm 9.66.3 150x10 mm 9.66.4 100x10 mm 270 9.67 Providing and fixing ISI marked 85x42mm stainless steel pull bolt lock with necessary screws bolts, nut and washers etc. complete. 271 9.68 Providing and fixing ISI marked stainless steel door latches with screws etc. complete : 9.68.1 300x20x6 mm 9.68.2 250x20x6 mm 272 9.69 Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : 9.69.1 125 mm 9.69.2 100 mm 9.69.3 75 mm 273 9.70 Providing and fixing stainless steel hasp and staple (safety type) conforming to IS specification with necessary screws etc. complete : 9.70.1 150 mm 9.70.2 115 mm 9.70.3 90 mm 274 9.71 Providing and fixing stainless steel casement stays (straight peg type) conforming to IS specification with necessary screws etc. complete. 9.71.1 300 mm weighing not less than 200 gms. 9.71.2 250 mm weighing not less than 150 gms. 9.71.3 200 mm weighing not less than 120 gms. 275 9.72 Providing and fixing stainless steel safety chain with necessary fixtures for doors. Conforming to IS specification (Weighing not less than 450 gms.) 276 9.73 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 9.73.1 125x64x1.90 mm 9.73.2 100X58X1.90 mm 9.73.3 75x47x1.80 mm 9.73.4 50x37x1.50 mm 277 9.74 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 9.74.1 125x64x2.50 mm 9.74.2 100x60x2.50 mm 9.74.3 75x50x2.50 mm 278 9.75 Providing and fixing 50 mm Stainless steel cup board or wardrobe knob with necessary screws (best make of approved quality) 279 9.76 Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete. 280 9.77 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 9.77.1 125x85x5.5 mm (heavy type) 9.77.2 125x70x4 mm (ordinary type) 9.77.3 100x85x5.5 mm (heavy type) 9.77.4 100x70x4 mm (ordinary type) 9.77.5 75x65x4 mm (heavy type) 9.77.6 75x40x2.5 mm (ordinary type) 9.77.7 50x40x2.5 mm (ordinary type) 281 9.78 Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete : 9.78.1 150x125x27x5 mm 9.78.2 125x125x27x5 mm 9.78.3 100x125x27x5 mm 9.78.4 75x100x20x3.2 mm 282 9.79 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 9.79.1 400x10 mm 9.79.2 250x10 mm 9.79.3 200x10 mm 9.79.4 150x10 mm 9.79.5 100x10 mm 283 9.80 Providing and fixing bright finished brass door latch with necessary screws etc. complete. 9.80.1 300x16x5 mm 9.80.2 250x16x5 mm 284 9.81 Providing and fixing bright finished brass handles with necessary screws etc. complete. 9.81.1 125 mm 9.81.2 100 mm 9.81.3 75 mm 285 9.82 Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete. 9.82.1 300x16mm 9.82.2 250x16mm 286 9.83 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 287 9.84 Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). 288 9.85 Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 289 9.86 Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality). 290 9.87 Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : 9.87.1 40 mm 9.87.2 50 mm 9.87.3 65 mm 9.87.4 75 mm 291 9.88 Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) 292 9.89 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 293 9.90 Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. 294 9.91 Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 9.91.1 300 mm weighing not less than 330 gms 9.91.2 250 mm weighing not less than 280 gms 9.91.3 200 mm weighing not less than 240 gms 295 9.92 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 9.92.1 150 mm 9.92.2 115 mm 9.92.3 90 mm 296 9.93 Providing and fixing Cromium plated brass hanging type floor door stopper with necessary screws, etc. complete. 297 9.94 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. 298 9.95 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. 299 9.96 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 300 9.97 Providing and fixing chromium plated brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 301 9.98 Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality). 302 9.99 Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of : 9.99.1 Size 40 mm 9.99.2 Size 50 mm 9.99.3 Size 65 mm 9.99.4 Size 75 mm 303 9.100 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. 304 9.101 Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete. 9.101.1 300x16mm 9.101.2 250x16mm 305 9.102 Providing and fixing chromium plated brass tower bolts ISI marked with nuts and screws etc complete. 9.102.1 400X10mm 9.102.2 300x10mm 9.102.3 250x10mm 9.102.4 200x10 mm 9.102.5 150x10 mm 9.102.6 100x10 mm 306 9.103 Providing and fixing chromium plated brass door latch ISI marked with necessary screws etc complete. 9.103.1 300x16x5mm 9.103.2 250x16x5mm 307 9.104 Providing and fixing chromium plated brass night latch ISI marked with necessary screws etc complete. 308 9.105 Providing and fixing chromium plated brass handles with necessary screws etc. complete: 9.105.1 125 mm 9.105.2 100 mm 9.105.3 75 mm 309 9.106 Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. 310 9.107 Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : 9.107.1 300 mm weighing not less than 330 gms 9.107.2 250 mm weighing not less than 280 gms 9.107.3 200 mm weighing not less than 240 gms 311 9.108 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note:- Aluminum hinges shall not be used in wooden shutters. 9.108.1 125x75x4 mm 9.108.2 125x63x4 mm 9.108.3 100x75x4 mm 9.108.4 100x63x4 mm 9.108.5 100x63x3.2 mm 9.108.6 75x63x4 mm 9.108.7 75x63x3.2 mm 9.108.8 75x45x3.2 mm 312 9.109 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 9.109.1 300x16 mm 9.109.2 250x16 mm 313 9.110 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 9.110.1 400X10mm 9.110.2 300x10 mm 9.110.3 250x10 mm 9.110.4 200x10 mm 9.110.5 150x10 mm 9.110.6 100x10 mm 314 9.111 Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. 315 9.112 Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 316 9.113 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 9.113.1 125 mm 9.113.2 100 mm 9.113.3 75 mm 317 9.114 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 9.114.1 Single rubber stopper 9.114.2 Twin rubber stopper 318 9.115 Providing and fixing aluminium casement window stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 319 9.116 Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. 320 9.117 Providing and fixing aluminum U beading of required size to Pre-laminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge. 321 9.118 Providing and fixing PTMT handles with necessary screws etc. complete. 9.118.1 125x34x24 mm weighing not less than 23 gms. 9.118.2 150x34x24 mm weighing not less than 26 gms. 322 9.119 Providing and fixing PTMT Butt hinges with necessary screws etc. complete. 9.119.1 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms. 9.119.2 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. 323 9.120 Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 9.120.1 152x42x18 mm weighing not less than 60 gms. 9.120.2 202x42x18 mm weighing not less than 78 gms. 324 9.121 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. 325 9.122 Providing and fixing PTMT hanging type floor door stoper with necessary screws etc complete. 326 9.123 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 9.123.1 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.123.1.1 Second class teak wood. 9.123.1.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.1.3 Kiln seasoned selected class of sheesham wood. 9.123.2 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.123.2.1 Second class teak wood. 9.123.2.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.2.3 Kiln seasoned selected class of sheesham wood. 9.123.3 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.123.3.1 Second class teak wood. 9.123.3.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.3.3 Kiln seasoned selected class of sheesham wood. 9.123.4 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.123.4.1 Second class teak wood. 9.123.4.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.4.3 Kiln seasoned selected class of sheesham wood. 327 9.124 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. 9.124.1 With 2nd class teak wood beading 62x19 mm. 9.124.2 With 12 mm mild steel U beading. 328 9.125 Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Haldu, Kail, Bija wood in scantling of section 50x25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. 329 9.126 Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height). 330 9.127 Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer- in-charge. 331 9.128 Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. 332 9.129 Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality). 9.129.1 Triple strip vertical type. 9.129.2 Double strip (horizontal type). 333 9.130 Providing and fixing magic eye in door shutters including fixing. Complete (Best make of approved quality). 334 9.131 Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge. 9.131.1 300mm long 9.131.2 450mm long 9.131.3 500mm long 335 9.132 Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) 336 9.133 Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. 9.133.1 Marine plywood conforming to IS: 710 9.133.2 Fire retardant plywood conforming to IS: 5509. 337 9.134 Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 9.134.1 1.5 mm thick. 9.134.2 1.0 mm thick. 338 9.135 Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge. 339 9.136 Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in- Charge. 9.136.1 With decorative veneering on one side and commercial veneering on other side. 9.136.2 With non decorative veneering on both sides. 340 9.137 Providing and fixing factory made shutters of 25 mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium U type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of U beading and hinges will be paid for separately). 341 9.138 Providing and fixing in wall lining MDF board medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 9.138.1 12 mm thick. 9.138.2 18 mm thick. 9.138.3 25 mm thick. 342 9.139 Providing and fixing 25mm thick pre- laminated medium density fibre board exterior grade(Grade-I) IS:14587:1998 marked one side decorative to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S. piano hinges IS:3818 marked with necessary screwed complete 343 9.140 Providing and fixing skirting with Pre- laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand complete. 9.140.1 18 mm thick 9.140.2 25 mm thick 344 9.141 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete. 9.141.1 75mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3 1996 Board with BIS certification marks. 9.141.2 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part I 1996 Board with BIS certification marks. 9.141.3 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./sq.cm. 9.141.4 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw. 9.141.5 68mm overall thickness partition using 9mm thick Heavy Duty Fibre Cement Board double skin non asbestos, reinforced with cellulose fibre,manufactured through autoclaving proces(High presssure steam cured)Type A, Category 4 conforming to IS 14862:2000. (for wet areas) 9.141.6 70 mm overall thickness Partition using 10mm thick double skin non-asbestost multipurpose termite, fire & moisure resistance (acoustic 30db) cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 345 9.142 Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the W profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm, placed @ 610mm C/C with fully threaded self- tapping dry wall screws. Board is fixed to the W profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing and directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 9.142.1 10 mm thick tapered edge calcium silicate board made with calcareous and siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure, with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. 9.142.2 12 mm thick Gypsum board conforming to IS: 2095 Part-I. 9.142.3 8 mm thick non-asbestost multipurpose termite, fire & moisure resistance cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 9.142.4 8mm Both side Factory Prelamianted cement bonded particle board as per IS: 15786. 9.142.5 9mm thick non asbestos,heavy duty fibre cement board reinforced with cellulose fibre manufactured through autoclaving process(High pressure steam cured) Type A,Category 4, conforming to IS 14862. 346 9.143 Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically and horizontally ) including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer- in-charge. 347 9.144 Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 348 9.145 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately). 9.145.1 Board 12 mm thick 9.145.2 Board 18 mm thick 349 9.146 Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 9.146.1 18 mm thick 9.146.2 25 mm thick 350 9.147 Providing and Installation of acoustical wall panelling fabric finish hardened square edge, FR grade fabric (colour as approved by Egnineer in charge) wrapped soft fibre core (glass fibre) panel having metal framing, of size 600x2100x25mm having density 100-120Kgs/ m3, weight 3.0kg/m2 NRC up to 0.9 installed by using impaling clip. Impaling clips are attached directly to the wall/frame work with the points extending outward. Then panels shall positioned and pressed into place. 351 9.148 Providing and installation of acoustical wall panelling wood finish Slats made out of HDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts bothways. 352 9.149 Providing and installation of paintble acoustic wall panelling consisting of strand kerfed edge paint finished as approved by Engineer in charge. magnesite bonded wood fiber panels of size 600x2400x20mm having density 400kg/m3, weight 8- 20kg/m2 which is fixed to GI strut system. fastened to wall positioned horizontally in a regular manner at 600mm centers. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channel at 600mm centers. The Kerfed edge panels shall be then inserted into the H-spline against wall to perfect fit. 9.149.1 Wt. 8.20 kg/m2 9.149.2 Wt. 4.2 kg/m2 353 9.150 Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-incharge. (Frame work shall be paid forseparately) 9.150.1 12mm thick commercial ply conforming to IS: 1328 BWR type. 9.150.2 18mm thick commercial ply conforming to IS: 1328 BWR type. 354 9.151 Providing and Installation of acoustic wall panelling consisting of Soak Coard of selected colours as approved by Engineer in charge. Kerf edge Fabric wrapped wood fiber panels of size 600x2400x20mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI strut system. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channels at 600mm centers. Kerfed edge Fabric wrapped panels shall be then inserted into the H-spline against wall to perfect fit. 355 9.152 Providing and Installation of acoustic wall panelling consisting of Soak Cord of selected colours as approved by Engineer in charge, square edge Fabric wrapped wood fiber panels of size 600x1200x10mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI struts,Z bars. GI Z bars having 40mm height, thickness 1.2mm is first fixed behind the panels by identifying resin spots by using suitable fasteners.Clean exposed surfaces of wall and ensure walls are in plumb line before installing on wall (provide necessary packing shims if required). Soak cord square edge panels shall be slided into the Z bars fixed on wall. 356 9.153 Providing and installation of acoustic wall panelling consisting of Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch Tracks half wrap/ full wrap 25mm and Midseam 300mm centers. The fabric is stuck on the Align Tape (by removing the protective cover) at the same time as being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module width would be 1600mm. 357 9.154 Providing and Installation of wall panelling consisting of Square edge Magnesia core panels of size 1100x2400x8mmmm having density 1000kgs/m3, weight 8kg/m2 installed by using GI Strut system. The GI struct system includes Cross channel having thickness 0.45mm, length 3600mm, knurled web 40, depth 10mm and equal flanges of 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. The panels to be fixed on the cross channel with suitable fasteners. 358 9.155 Supplying and installation of magnesia block 66 mm thick drywall partition including Framework includes Floor/ Head GI channels having thickness 0.5mm, length 3600mm, equal flanges of 32mm and web of 50mm fixed to floor and ceiling with suitable fasteners at 300mm centers staggered. Second layer of magenesia oxide block 8mm thick should be fixed other side of the frame work similar fashion as the first layer. 3mm gap should be maintained between boards.3 mm gap shall be filled with jointing compound. Magnesia oxide block shall have following physical charecterstics. 9.155.1 Using 8mm thick magnesia block 9.155.2 Using10mm thick magnesia block 9.155.3 Using12mm thick magnesia block 9.155.4 Using12mm thick magnesia block 359 9.156 Add extra for providing and fixing Thermal insulation by providing 50mm thick synth PF having dencity 1000 GSM within the cavity held in position by using chicken wire mesh/ cross bracing/ pasting to the wall. 360 9.157 Providing and laying Gypsum panel partitions 100mm thick with water proof Gypsum panels of size 666x500x100mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor II level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2. 361 9.158 Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge: 9.158.1 Extruded section Profile size 48x40 mm. 9.158.2 Extruded section Profile size 42x50 mm. 362 9.159 Providing and fixing Panelled UPVC door shutter to existing door frames. 24 mm thick factory made UPVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). 363 9.160 Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. 364 9.161 Providing and fixing 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. The Top and Bottom edges of the shutter are covered with an end-cap of the size 25mmx11mm. Door shutter shall be reinforced with special polymeric reinforcements as per required specification and direction of Engineer-in- charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. 365 9.162 Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mmx37mm with wall thickness 2mm (±0.2mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos. of plastic brackets of size 100mmx37mm, wall thickness 2mm (+0.2mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100mmx20 mm, and inserting 2 nos. tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-charge. 366 9.163 Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mmx53 mm, having wall thickness 2.0mm (±0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x2mm thickness (± 0.2 mm) and 75mmx200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. and sizes of anchor dash fastener, all complete as per manufacturers specification and direction of engineer-in-charge. 367 9.164 Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115mm x 37mm with wall thickness , panels of 100 x 20 mm printed and laminated and inserting 2 nos. 6 mm dia. bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-Charge. 368 9.165 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in- Charge. 369 9.166 Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall have a coat of steel primers and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. 9.166.1 Plain PVC door shutters. 9.166.2 Pre laminated PVC door shutters. 370 9.167 Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width and 32 mm thickness, frame will be mitred and Jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. 371 9.168 Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mmx30 mm having wall thickness 5 mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturers specifications and direction of Engineer-in-charge: 9.168.1 Non decorative finish. 9.168.2 Decorative finish (both side wood grained finish). 372 9.169 Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) 9.169.1 Single rebate (75 mm X 50 mm) 9.169.2 Single rebate (100 mm X50 mm) 9.169.3 Single or double rebate (125 mm X 65 mm) 373 9.170 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 9.170.1 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter 9.170.2 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter 9.170.3 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter 9.170.4 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter 374 9.171 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 9.171.1 30 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 9.171.2 35 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 375 9.172 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 9.172.1 18 mm thick 9.172.2 25 mm thick 376 9.173 Providing and fixing factory made single extruded WPC (Wood polymer composite solid plain white color board for backing of cupboards and bathrooms/ kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-in-Charge. (Note: stainless steel screws shall be paid separately) 9.173.1 6 mm thick 9.173.2 12 mm thick 377 9.174 Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. 378 9.175 Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5 mm (±0.2 mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2nos of PVC bracket of size 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge. 379 9.176 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5mm (±0.2mm) thick, having styles and rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125 mm x11 mm, including providing 5mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturers specification and direction of Engineer-in- charge. 9.176.1 Non decorative finish (matt finish). 9.176.2 Decorative finish (wood grained finish). 380 9.177 Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. 381 9.178 Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stat shall be provided 382 9.179 Providing and fixing to existing door frames. 30 mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames. 383 9.180 Providing and fixing door frame FRP 30mm thick fiberglass reinforced Plastic (F.R.P.) flush door shutter in different plain and wood inish made with fire retardant grade unsaturated polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. 384 9.181 Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather and sunlight. 385 9.182 Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in- charge (Dash fastener to be paid for separately). 386 9.183 Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II) tested and certified as per laboratory approved by Engineer-in-charge with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). 387 9.184 Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc. complete all as per direction of Engineer- in-charge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance. 388 9.185 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch and Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. 389 9.186 Providing and Fixing factory made UPVC door frame made of UPVC exturded sections, of size 65 mmx55 mm with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mmx30 mm having wall thickness 2 mm (±0.2mm), including providing and fixing 3 nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number and size of anchor dash fastners, all complete as per manufacturers specification and direction of Engineer-in-charge. 390 9.187 Providing and Fixing, UPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mmx100 mm long fasteners, all complete as per direction of Engineer-in-charge. (Glazing, hardware hinges and fitting etc. to be paid separately.) 9.187.1 Casement Window (Outward/Inward opening) with hinge System. 9.187.1.1 Frame (50 mm x 50mm) 9.187.1.2 Sash (Style and Rail) (62 mm x 34 mm) 9.187.1.3 Mullion (intermediate Section) (66mm x 50 mm) 9.187.1.4 ‘T Profile (one vertical length in between two shutters) (24mm x 34.5mm) 9.187.1.5 Glazing bead (12mm x 18mm) 9.187.2 Casement Window (With friction hinge and outward opening) 9.187.2.1 Casement Frame (67mm x 62mm) 9.187.2.2 Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) 9.187.2.3 Casement Glazing bead (35mm x 18 mm) 9.187.3 Sliding Window (Two Track, 2/4 Shutters) 9.187.3.1 Two Track Sliding Frame (67mm x 52mm) 9.187.3.2 Sliding window Sash (60mm x 44mm) 9.187.3.3 Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) 9.187.3.4 Sliding Glazing bead (35 mm x 18 mm) 9.187.4 Sliding Door (Two Track, 2/4 Shutters) 9.187.4.1 Two Track Sliding Frame (67mm x 52mm) 9.187.4.2 Sliding Door Sash (80mm x 44mm) 9.187.4.3 Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) 9.187.4.4 Sliding Glazing bead (35 mm x 18 mm) 391 9.188 Providing and fixing stainless steel (SS- 304 grade) friction hinges to the side/ top hung UPVC windows, of approved quality with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 9.188.1 200 x 19 x 1.9 mm 9.188.2 250 x 19 x 1.9 mm 9.188.3 300 x 19 x 1.9 mm 9.188.4 350 x 19 x 1.9 mm 9.188.5 400 x 19 x 1.9 mm 392 9.189 Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. 393 9.190 Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete. 394 9.191 Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete. 395 9.192 Providing and fixing steel roller for UPVC sliding door with necessary screws etc. complete. 396 9.193 Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete. 397 9.194 Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.194.1 Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) 9.194.2 Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). 9.194.3 Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). 9.194.4 Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) 9.194.5 Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) 9.194.6 Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion 67 x 80 all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) 398 9.195 Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic capsof approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.195.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) 399 9.196 Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.196.1 Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). 9.196.2 Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). 400 9.197 Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.197.1 Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) 9.197.2 Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 9.197.3 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). 9.197.4 Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). 9.197.5 Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) 401 9.198 Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.198.1 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm). 9.198.2 Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). 402 9.199 Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madAfter fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Note: - For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.199.1 Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 10.00 sqm). 9.199.2 Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto10.00 sqm). 9.199.3 Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) 9.199.4 Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) 403 9.200 Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture PVC beading as gap insert below top and bottom rail joined together using solvent cement adhesive. An additional 5mm thick Prelaminated PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in- charge. Manufacturer’s specification and drawing. 30 mm thick pre laminated PVC door shutters. 404 9.201 Providing and fixing factory made integral PVC flush door shutter made from rigid PVC foam sheet (Single Extruded) with density not less than 600 kg/cum, conforming to IS: 2380 part 14 for screw holding strength with Celluka finish surfaces on both sides at the manufacturing process itself, manufactured by an ISO : 9001 -2000 certified company. 9.201.1 24 to 25 mm thick plain solid PVC flush door shutter 9.201.2 28 to 30 mm thick plain solid PVC flush door shutter 405 9.202 Providing and fixing factory made pre laminated solid PVC flush door shutters 28 to 30 mm thick made from co-extruded three layer rigid PVC foam sheet with density not less than 600 kg/cum, conforming to IS: 2380 part 14, for screw holding strength and outer layers laminated on both sides by laminated sheet with density not less than 1400 kg/cum, lamination shall be at the manufacturing process itself and manufactured by an ISO: 9001-2000 certified company. 9.202.1 1mm thick laminated sheet 9.202.2 0.12 mm thick laminated sheet 406 9.203 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) laminated type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens with well matched 3mm thick commercial 3ply veneering consisting of vertical grains, cross bands withing frame of door/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS: 2202. The rate shall be inclusive of all material and labour complete and as per specification and dirction of Engineer-in-Charge. 9.203.1 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 9.203.2 35mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 9.203.3 25mm thick (for cupboard) including 3 nos. 75mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 407 9.204 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) non decorative type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens (strips) and frame of kiln seasoned and chemically treated, finger jointed cross bands including all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50cm. Each shutter shall be factory made to the exact opening size within frame of doors/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and confirmity with IS:2202. 9.204.1 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary. 9.204.2 30mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 9.204.3 25mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 408 9.205 Deduct for not providing 2nd class teak wood batten lipping in factory made shutters i.e. item no 9.203 and 9.204. 409 9.206 Providing & fixing acrylic solid surface in thickness 4/6/12 mm of approved colour made out of non-porous surfacing material homogeneously composed of ± 1/3 acrylic resin (also known as PolyMethyl Methacrylate -PMMA), and ± 2/3 NO extra shall be paid for joint adhesive, silicon or related accessories and for transportation. Item should cover 5 years, commercial warranty of product as per FCWS norms. The product should be UV protected for exterior applications & LGA hyginene tested anti bacterial for health care application areas. Area of application are Table Tops, Exterior facade cladding, health care areas like modular operation theater hospital scrubs, wash basins, partition & paneling, laboratory commercial show room, hotels, office & residential areas. 9.206.1 Acrylic Solid Surface sheet – Glacier white designer white 9.206.1.1 6 mm thick sheet 9.206.1.2 12 mm thick sheet 9.206.2 Acrylic Solid Surface sheet - Any Solid colours/Hospital use Medi Blue 9.206.2.1 6 mm thick sheet 9.206.2.2 12 mm thick sheet 9.206.3 Acrylic Solid Surface sheet - Any other 9.206.3.1 6 mm thick sheet 9.206.3.2 12 mm thick sheet 410 9.207 Providing and fixing of 8 mm thick non asbestos multipurpose board reinforced with cellulose fibers for wall cladding will consist of following operations:1. Fixing of a layer of 6mm Moisture/fire Resistance Heavy Duty fibre cement Boards over above mentioned 6 mm heavy duty fibre cement board with the help of 25mm self drilling, self tapping Fibre Cement screws @ 300mm c/c. All external corners are to be protected with the use of suitable corner profile of GI or PVC. All above operation is to be done in order and as directed by Engineer-in-Charge.(frame work to be paid separately). 411 9.208 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS: 15380(2003), eco-friendly, termite resistant, borer free, anti warping phenol formaldehyde (PF), decorative designe moulded or rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company’ gujcon, century, green shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.208.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.208.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.208.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. 412 9.209 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), non decorative designe moulded and labor complete as per specifications and direction of engineer-in- charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.209.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.209.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws 9.209.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. 413 9.210 Providing and fixing IS marked factory made High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), 2 and 4 Panel designe moulded or plain construction with particle board shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.210.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.210.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 414 9.211 HDF decorative prelaminated pine wood panel door with glass / wiremash:- Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.211.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.211.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 415 9.212 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), . The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.212.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.212.2 32 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.212.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. Piano hinges with screws. 416 9.213 Non Decorative Pine Wood Flush Door:- Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer- in-charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202 9.213.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.213.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.213.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 417 9.214 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned sheet shall be as per IS: 2046 type S of approved quality. Each shutter shall be factory made to the exact size (opening) within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in- charge. 9.214.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.214.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.214.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 418 9.215 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in-charge. 9.215.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.215.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.215.3 25mm thick (for cupboard) including 3 nos. 75 mm long ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 419 9.216 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) veneer decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) s and commercial grade face veneers on both outer faces of shutters including kiln seasoned and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. 9.216.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.216.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.216.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 420 9.217 Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides,made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastne with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. 421 9.218 Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity.Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. 422 10.1 Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 423 10.2 Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 424 10.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required. 425 10.4 Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer. 426 10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 10.5.1 Using M.S. angels 40x40x6mm for diagonal braces 10.5.2 Using flats 30x6mm for diagonal braces and central cross piece. 427 10.6 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454- part-1 and M.S. top cover of required thickness for rolling shutters. 10.6.1 80x1.25mm M.S. laths with 1.25 mm thick top cover. 10.6.2 80x1.20 mm M.S. laths with 1.20 mm thick top cover. 10.6.3 80x0.90 mm M.S. laths with 0.90 mm thick top cover. 428 10.7 Extra for providing suitable mechanical device chain and crank operation for operating rolling shutters. 10.7.1 Exceeding 10.00 sqm and upto 16.80 sqm in the area. 10.7.2 Exceeding 16.80 sqm in area. 429 10.8 Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-Charge. (Area of grill to be measured). 430 10.9 Providing and fixing ball bearing for rolling shutters. 431 10.10 Providing and fixing factory made ISI marked glazed steel doors, windows and ventilators side /top /centre hung with beading and Z-section all members such as F7D, F4B, K11 B and K12 B and other tubular section member etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). 10.10.1 Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). 10.10.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.10.3 Extra for providing and fixing steel beading of size 10x10x1.6mm (box type) approved shape and section with screws instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. 432 10.11 Providing and fixing L-iron or T-iron frames for doors, windows and ventilators of mild steel L-section or T-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 10.11.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 433 10.12 Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge: 10.12.1 Profile B of 1.60mm thick single rebate of size 80mmx50mm 10.12.1.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.1.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.2 Profile C of 1.60mm thick single rebate of size 100mmx50mm 10.12.2.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.2.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.3 Profile E of 1.60mm thick double rebate of size 115mmx50mm 10.12.3.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.3.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.4 Profile B of 1.25mm thick single rebate of size 80mmx50mm 10.12.4.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.4.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.5 Profile C of 1.25mm thick single rebate of size 100mmx50mm 10.12.5.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.5.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.6 Profile E of 1.25mm thick double rebate of size 115mmx50mm 10.12.6.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.6.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 434 10.13 Providing and fixing M.S. Tubular frames and shutters or frames only or shutters only for doors, windows, ventilators and cupboard with any sections, made of 1.60 mm or 1.25 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size as per drawing, including fixing of necessary butt hinges, stays and screws and applying a priming coat of approved steel primer excluding cost of all fittings such as handles, tower bolts, sliding door bolts, latches etc. and panels. 10.13.1 Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). 10.13.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 435 10.14 Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.14.1 Hot finished welded type tubes 10.14.2 Hot finished seamless type tubes 10.14.3 Electric resistance or induction butt welded tubes. 436 10.15 Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats of Epoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. 437 10.16 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. 438 10.17 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 16mm dia M.S. bar bent to shape as per standard drawing. 439 10.18 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. 440 10.19 Providing and fixing bolts including nuts and washers complete. 441 10.20 Providing and fixing M.S. rivets of sizes in position. 442 10.21 Welding by gas or electric plant including transportation of plant at site etc. complete. 443 10.22 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.22.1 In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. 10.22.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 444 10.23 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer. 10.23.1 M.S. tube. 10.23.2 E.R.W. tubes. 445 10.24 Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. 10.24.1 10x60 mm 10.24.2 10x80 mm 10.24.3 10x120 mm 10.24.4 10x140 mm 10.24.5 10x160mm 446 10.25 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 447 10.26 Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete. 10.26.1 Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides 10.26.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. 448 10.27 Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. 10.27.1 With 4.0 mm thick glass panes 10.27.2 With 5.50 mm thick glass panes 10.27.3 With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. 10.27.4 With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm box beading. 10.27.5 With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. 10.27.6 With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. 10.27.7 With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. 10.27.8 With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. 449 10.28 Add extra for providing and fixing froasted glass instead of float glass. 10.28.1 With 4.0 mm thick glass panes. 10.28.2 With 5.5 mm thick glass panes. 450 10.29 Supplying at site: 10.29.1 R.C.C. Standards post/ struts/rails/ poles of mix 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge including fixing (cost of earth works in excavation, concrete works in foundation to be paid separately). 10.29.2 Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) 10.29.3 Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately). 451 10.30 Supplying and fixing turn buckles and straining bolts for barbed wire fencing. (Labour rate only). 452 10.31 Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) with GI barbed wire. 453 10.32 Fencing with barbed G.I. wire angle iron post placed fitted to at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. 454 10.33 Fixing Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, painting, earth work in excavation and cement concrete to be paid for separately). (Labour rate only). 455 10.34 Providing and fixing G.I. or PVC coated G.I.wire chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting earthwork & c.c. to be paid separately) 10.34.1 Made of G.I. wire. 10.34.2 Made of G.I. wire, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. 456 10.35 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete, with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer-in- Charge. (cost of post painting earth work & C.C. to be paid separately) 457 10.36 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). 458 10.37 Providing and fixing of ISI marked insulated fire rated GI Sheet doors conforming to FD 120-PI classification of IS 3614:2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating. The Door frame shall be single rebate grooved profile of size minimum 125 mm x 75mm made out of 1.50mm minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembled with bolting system. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip of size 10x4mm. All provisions should be mortised & provided with necessary inbuilt reinforcement to receive appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves (Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note:- For grouting of Steel frames in masonary installations ;cement slurry of 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be recommended except head member(Payable in extra item). Door leaf should be minimum 60mm thick fully flush double skin door. Door leaf must be manufactured from minimum 1.2mm thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 96 kg/cum. All doors shall befactory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size 100x 89x3 mm along with all suitable hardware (Payable in extra item).Vision lite size 185x285 (max area up to 0.06sqm) wherever applicable should be provided with single layered clear fire rated glass panes as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clip on arrangement. The glass will be provided with fire rated ceramic tape of min. 2 mm thickness with min. 15mm width al around on either face. Every Glass pane must carry a permanent marking of its glass manufacturer 459 10.38 Providing and fixing of factory make air tight casement windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 10.38.1 Openable window 10.38.2 Fixed windows 460 10.39 Providing and fixing of factory make single rebate openable/fixed windows made of roll formed galvanized pre- pained steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick) heavy duty pivot hinges per shutter and window fitted without glazing including 10mm square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. 10.39.1 Openable single rebate window 10.39.2 Fixed single rebate window 461 10.40 Providing and fixing of factory make double rebate windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self- expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete.. 10.40.1 Openable double rebate window 10.40.2 Fixed double rebate window 462 10.41 Providing and fixing of factory make fixed louvers fabricated from roll formed sections made of galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated/powder coated Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. (glazing shall be paid separately as per SOR rate) 463 10.42 Providing and fixing of factory make pre painted steel sliding window 2 track-2 panel sliding window fabricated from roll formed sections made of galvanized steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 464 10.43 Providing and fixing pre painted steel sliding window 3 fabricated from Roll formed sections made of galvanized Steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 465 11.1 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) 20mm nominal size stone aggregate in panels finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.(Area of panel not to exceed 2.0 sqm) 466 11.2 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 467 11.3 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 468 11.4 Cement plaster skirting 18 mm thick (upto 30 cm height) with cement mortar 1:3 (1 cement: 3 sand) finished with a floating coat of neat cement. 469 11.5 Cement concrete pavement with Cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete. 470 11.6 Making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. 471 11.7 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) 11.7.1 Dark shade pigment with ordinary cement. 11.7.2 Light shade pigment with white cement. 11.7.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.7.4 White cement without any pigment. 11.7.5 Light shade pigment with ordinary cement. 11.7.6 Ordinary cement without any pigment. 472 11.8 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. (Area of panel not to exceed 2.0 sqm) 11.8.1 Dark shade pigment with Ordinary cement. 11.8.2 Light shade pigment with white cement. 11.8.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.8.4 White cement without any pigment. 11.8.5 Light shade pigment with ordinary cement. 11.8.6 Ordinary cement without any pigment. 473 11.9 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) 11.9.1 Dark shade pigment with ordinary cement. 11.9.2 Light shade pigment with white cement. 11.9.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.9.4 White cement without any pigment. 11.9.5 Light shade pigment with ordinary cement. 11.9.6 Ordinary cement without any pigment. 474 11.10 Marble chips skirting (upto 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 sand) : rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix :7 marble chips) by volume : 11.10.1 Dark shade pigment with ordinary cement. 11.10.2 Light shade pigment with white cement. 11.10.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.10.4 White cement without any pigment. 11.10.5 Light shade pigment with ordinary cement. 11.10.6 Ordinary cement without any pigment. 475 11.11 Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width including cost of forming, nosing etc. 476 11.12 Providing and fixing glass strips 40 mm wide and 4 mm thick in joints of terrazo/ cement concrete floors. 477 11.13 18 mm thick crazy marble stone white, black or as specified marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc.complete . 478 11.14 Precast terrazo tiles 22mm thick with graded marble chips of size upto12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : 11.14.1 Light shade using white cement. 11.14.2 Medium shade using 50%white cement and 50% ordinary cement. 11.14.3 Dark shade using ordinary cement. 11.14.4 Ordinary cement without any pigment. 479 11.15 Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. 480 11.16 Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : 11.16.1 Light shade pigment using white cement. 11.16.2 Medium shades pigment using 50% white cement and 50% ordinary cement. 11.16.3 Dark shade pigment using ordinary cement. 11.16.4 Ordinary cement without any pigment. 481 11.17 Chequeredterrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : 11.17.1 Light shade pigment using white cement. 11.17.2 Medium shade pigment using 50% white cement, 50% ordinary cement. 11.17.3 Dark shade pigment using ordinary cement. 11.17.4 Ordinary cement without any pigment. 482 11.18 Chequered precast cement concrete tiles any finish, any size 22 mm thick IS:13810-1993 ISI mark in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, 15mm thick screed bad in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. 11.18.1 Light shade pigment using white cement. 11.18.2 Medium shade pigment using 50% white cement 50% Grey cement. 11.18.3 Dark shade pigment using ordinary cement. 11.18.4 Ordinary cement without any pigment. 483 11.19 Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sandand grey cement slurry, joints treated with white cement mixed with pigment to match colour of stone including rubbing and polishing complete with : (area of slabs over 0.5 sqm) 11.19.1 Makrana white second quality. 11.19.2 Raj Nagar plain. 11.19.3 Agaria White/Morgarh 11.19.4 Katni marble 11.19.5 Black Zebra. 11.19.6 Udaipur / Baroda green marble 11.19.7 Pink plain marble. 11.19.8 Jaisalmer Yellow 484 11.20 Marble stone 18 mm thick in riser of step, skirting, dado and pillar laid on 12 mm average thick cement mortar 1:3 (1 cement: 3 sand and laid with white cement slurry) joints treated with white cement mixed with pigment to match the shade of the slab i/c rubbing and polishing complete. (area of slab over0.50sqm.) 11.20.1 Makrana white second quality. 11.20.2 Raj Nagar plain. 11.20.3 Agaria White/Morgarh 11.20.4 Katni marble 11.20.5 Black Zebra. 11.20.6 Udaipur / Baroda green marble 11.20.7 Pink plain marble. 11.20.8 Jaisalmer Yellow 485 11.21 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). (Area of slabs over 0.50 sqm.) 11.21.1 Makrana white second quality. 11.21.2 Raj Nagar plain. 11.21.3 Agaria White/Morgarh 11.21.4 Katni marble 11.21.5 Black Zebra. 11.21.6 Udaipur / Baroda green marble 11.21.7 Pink plain marble. 11.21.8 Jaisalmer Yellow 486 11.22 Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. 11.22.1 Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black 11.22.2.1 Granite fine grained dark crystal of other colours and various patterns 11.22.2.2 Granite coarse grained light black/ light red/white with crystal of other colours and various patterns 11.22.2.3 Granite grey/pink/brown with various patterns 11.22.3 Cuddpah stone 487 11.23 Extra for prefinished nosing to treads of steps of marble stone. 488 11.24 Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 metre. 489 11.25 Extra for prefinished grooves to treads of steps of granite stone 490 11.26 Providing and laying machine cut, mirror polished, Italian Marble stone (18 mm thick Italian Marble stone slab, Perlato, Rosso erona, Fire Red or Dark Emperadore etc.)work in flooring laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry mixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 491 11.27 Providing and fixing machine cut, mirror / eggshell polished , Marble stone work 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. for wall lining (veneer work) including dado, skirting, risers of steps etc. thick cement mortar 1:3 (1 cement : 3 sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. 492 11.28 Italian marble flooring in required design and patterns 11.28.1 Providing and laying machine cut, mirror polished Italian Marble stone 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadoreetc flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Note – This item shall be executed only after the prior approval of Chief Engineer. 493 11.29 Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). 111.29.1 Area of slab over 0.50 sqm 11.29.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.1.3 Gray/Pink/Brown or equivalent with various patterns 11.29.2 Area of slab upto 0.50 sqm 11.29.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.2.2 Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.2.3 Gray/Pink/Brown or equivalent with various patterns 494 11.30 Providing and laying gang saw cut 18 mm thick, mirror polished premoulded (wherever required) and pre polished machine cut granite stonework in flooring of required size shape of approved shade, color and texture in flooring laid over 20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand) including grouting the joints with white cement mixed with matching pigments epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 11.30.1 Area of slab over 0.50 sqm 11.30.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.1.3 Gray/Pink/Brown or equivalent with various patterns 11.90.2 Area of slab upto 0.50 sqm 11.30.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.2.2 Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.2.3 Gray/Pink/Brown or equivalent with various patterns 492 11.31 Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. (area of slab more than 0.50 sqm) 11.31.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.31.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter 11.31.3 Gray/Pink/Brown or equivalent with various patterns 495 11.32 Deduct for not polishing granite flooring (item no 11.29 & 11.30) 496 11.33 Providing and laying Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and as directed by the Engineer-in-Charge Granite stone slab Dark Black. Dark Red, White or equivalent, 11.33.1 Flamed Finish Polish 11.33.2 Leather Finish Polish 497 11.34 Granite stone work 18mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement:3 sand) and jointed with white cement slurry mixed with pigment to match the shade of slab. 498 11.35 Providing and fixing 10x10x7.50 cm Granite stone block hand cut andchisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 sand) with joints 10mm wide filled with same mortar mixed with matching pigment including ruled pointing etc. complete as per direction of engineer-in charge. 499 11.36 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm) 500 11.37 Deduction for using 20 mm thick slab instead of 25 mm thick slab of kota stone in item no 11.35 501 11.38 Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 502 11.38.1 10-12 mm thick 11.38.2 20 mm thick 503 11.39 Kota stone slab (area less than 0.5 sqm) rough chiseled dressed average 40 mm thick flooring for parking and open area of thickness over 20 mm (average) thick base laid over and jointed with grey cement slurry complete with base of cement mortar 1:4 (1 Cement : 4 Sand) 504 11.40 Providing edge moulding to 18mm thick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 11.40.1 Marble work 11.40.2 Granite work. 505 11.41 Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. 506 11.42 Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 507 11.43 Mirror polishing on marble work/Granite work/stone work wherever required to give high gloss finish complete. 508 11.44 Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1cement : 5 sand) with joints finished flush. 11.44.1 Red sand stone 11.44.2 White sand stone 11.44.3 Grey lime stone 11.44.4 Kota stone 509 11.45 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. 11.45.1 Red sand stone 11.45.2 White sand stone 510 11.46 40 mm thick machine rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) mixed with pigment to match the shade of stone and pointing with same mortar 11.46.1 Red sand stone 11.46.2 White sand stone 511 11.47 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. 512 11.48 Extra for Kota stone/ sand stone in treads of steps and risers using single length upto 1.05 metre. 513 11.49 Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 514 11.50 Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. 515 11.51 Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete. 516 11.52 Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete. 517 11.53 Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete. 518 11.54 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. 519 11.55 Deduct for not using 20mm thick cement mortar 1:4 (1 cement: 4 sand) bedding in laying of floor tiles. 520 11.56 Fixing glazed/ Ceramic/Rectified/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. 521 11.57 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.05% and conforming to IS: 15622 of approved make in all colours and shades for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 522 11.58 Providing and fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: 523 11.59 Providing and laying 500x500x40mm thick Turf paver on 150mm thick sub grade of compacted bed of 20mm nominal size stone aggregate and base course with 50mm thick sand and filling joints with sand including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer- in-charge. 524 11.60 Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting mortar bedding and joints filled with acid and/ or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. 525 11.60.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 sand)Acid and alkali resistant tile. 526 11.60.2 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 sand).Acid and alkali resistant tile. 527 11.61 8 mm thick.stones Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. 11.61.1 Marble tiles (polished) Raj Nagar. 11.61.2 Granite tile of any colour /shade 528 11.62 Providing and fixing cramps of required size and shape in RCC/ CC /Stone/ Brick masonry backing with cement mortar 1:2 ( 1 cement :2 sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). 11.62.1 Gunmetal cramps. 11.62.2 Stainless steel cramps. 529 11.63 Providing and fixing expansion hold fasteners of wedge expansion type on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. 11.63.1 Fastener with threaded dia 6 mm. 11.63.2 Fastener with threaded dia 10 mm. 11.63.3 Fastener with threaded dia 12 mm. 530 11.64 Providing and fixing stone slab table rubbed on both faces edges rounded and polished of size as required and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. 11.64.1 White Agaria Marble Stone. 11.64.2 Granite Stone of approved shade. 531 11.65 Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer- in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. 11.65.1 300 mm Finished Floor Height (FFH) 11.65.2 450 mm Finished Floor Height (FFH). 532 11.66 Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. 533 11.67 Providing Epoxy flooring self leveling type on strong base in desired colour/design as approved by Engineer-in-Charge. Resin for epoxy is to be of floor grade type i/c appropriate hardner and filler material. with 5 year defect liability period (This item is to be used only for operation theaters in hospitals) 11.67.1 1 mm thick 11.67.2 2 mm thick 11.67.3 3 mm thick 534 11.68 Providing and fixing acoustic PVC (Poly Vinyl Flooring) EN (European Standard) over fiberglass mat PVC foam backing (EN 14904), total thickness is 3.25mm (EN 428/EN 427), wear layer is 0.85 mm thick (EN 429), anti-bacterial and anti-fungus surface treatment , chemical resistance test qualified (EN-423)-high resistance, thermal and underfloor heating test qualified (EN12524) - all vinyl sheets must be linked crosswise with a continuous copper strip and finally connected to earth for grounding electrostatic electrical charges. Suitable and slip resistant. Recommended to use in area like Lecturer room, Conference room, Kids area, School, colleges, Residential and all commercial official scope etc. 535 11.69 Providing and fixing 2 mm thick heterogeneous PVC (poly vinyl flooring) EN (European Standard) with wear layer is 0.55mm thick of PVC, total weight is 2300 g/m2 approx. PUR (polyurethane reinforced), residual indentation approx.0.05 mm, castor wheel test qualified, dimensional stability ≤0.10%, static electrical charge .The floor finish should termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto100mm. Recommended to use in area like Patient rooms , Doctor room Lecturer room, Kids area, School, Colleges, Residential and all commercial official scope etc. 536 11.70 Providing and fixing 8mm and above thick laminated (wooden flooring) of AC4 and above grade product of approved made out of core high density fibre board (HDF), surface layer shall be high preasure laminated treated for abrasion, scratch, moisture protection, flame protection U.V resistant, layer of acrylic resin, aluminium oxide or similer layer having above properties, backing under layer on min 2 mm thickness shall provide as sound absorbent and moisture protection layer, The seamless impregenated decorative layer of specified size, design, colour and pettern, all bonded together under high temperature and pressure with eco-friendly. The material shall be applicable warranty formaldehyde free, eco- friendly and fully recyclable (eco-freindly) and matching shed and excluding quantity of skirting and profile. 537 11.71 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, 1:6 (1 cement : 6 sand) including filling the joints with same mortar, with common burntclay non modular bricks 11.71.1 100 mm thick 11.71.2 200mm thick 538 11.72 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colour and pattern over 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturers specifications and direction of Engineer-in-Charge. 11.72.1 80 mm thick C.C. paver block of M-35 grade 11.72.2 60 mm thick C.C. paver block of M-35 grade 11.72.3 60 mm thick C.C. paver block of M-30 grade 539 11.73 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- Charge). 540 11.74 Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side(top & bottom), including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-Charge. 541 11.75 Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished machine cut Granite of approved shade, colour and texture of Granite Door frame. in cement mortar 1:3 (1 cement :3 sand) Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge. 11.75.1 Granite Door frame for 100mm thick wall Thickness. 11.75.2 Granite Door frame for 200mm thick wall Thickness. 542 11.76 Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11.76.1 Plain ivory light shade : Size 600X600mm thickness 9-10mm 11.76.2 Dark shade (terracotta) : Size 600X600mm thickness 9-10mm 543 11.77 Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 77.1 Plain ivory light shade : Size 600X600mm thickness 9-10mm 11. 77.2 Dark shade (terracotta) : Size 600X600mm thickness 9-10mm 544 11.78 Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 78.1 In light shade glossy/ rustic /stain finished 11. 78.1.1 Size 600X600 mm thickness 9-10 mm 11. 78.1.2 Size 800X800mm thickness 11-12mm 11. 78.1.3 Size 800X1200 mm thickness 11-12mm 11. 78.2 In dark shade glossy/ rustic /stain finished 11. 78.2.1 (a) Size 600X600 mm thickness 9-10 mm 11. 78.2.2 (b) Size 800X800mm thickness 11-12mm 11. 78.2.3 (c) Size 800X1200 mm thickness 11-12mm 545 11.79 Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 79.1 In light shade glossy/ rustic /stain finished 11. 79.1.1 (a) Size 600X600 mm thickness 9-10 mm 11. 79.1.2 (b) Size 800X800mm thickness 11-12mm 11. 79.1.3 (c) Size 800X1200 mm thickness 11-12mm 11. 79.2 In dark shade glossy/rustic/stain finished 11. 79.2.1 (a) Size 600X600 mm thickness 9-10 mm 11. 79.2.2 (b) Size 800X800mm thickness 11-12mm 11. 79.2.3 (c) Size 800X1200 mm thickness 11-12mm 546 11.80 Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 80.1 In light colour and shades as ivory, beige blanco, grey etc. 11. 80.1.1 (a) Size 300X300 mm thickness 9-10 mm 11. 80.1.2 (b) Size 600X600mm thickness 9-10mm 11. 80.1.3 (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) 11. 80.2 In dark colour and shade etc. 11. 80.2.1 (a) Size 300X300 mm thickness 9-10 mm 11. 80.2.2 (b) Size 600X600mm thickness 9-10mm 11. 80.2.3 (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) 547 11.81 Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting, riser laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 81.1 In light colour and shades as ivory, beige blanco, grey etc. 11. 81.1.1 (a) Size 300X300 mm thickness 9-10 mm 11. 81.1.2 (b) Size 600X600mm thickness 9-10mm 11. 81.2 In dark colour and shades etc. 11. 81.2.1 (a) Size 300X300 mm thickness 9-10 mm 11. 81.2.2 (b) Size 600X600mm thickness 9-10mm 548 11.82 Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality including grouting the joints with white cement and matching pigments etc. complete 11. 82.1 For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) 11. 82.1.1 Size 600X600 mm thickness 9-10 mm 11. 82.1.2 Size 800X800mm thickness 11-12mm 11.82.1.3 Size 800X1600 mm thickness 11-12mm 11.82.1.4 Size 1000X1000 mm thickness 11-12mm 11. 82.1.5 Size 600X1200 mm thickness 11-12mm 11. 82.1.6 Size 800X1200 mm thickness 11-12mm 11. 82.1.7 Size 1200X1200 mm thickness 11-12mm 11.82.1.8 Size 1200X1800 mm thickness 11-12mm 11.82.1.9 Size 1200X2400 mm thickness 11-12mm 11. 82.2 For wall stain / rustic finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e.within 6 hours, Size 300X600 mm thickness 9-10 mm 11. 82.3 For wall polished / Glossy finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e. within 6 hours, Size 300X600 mm thickness 9-10 mm 549 11.83 Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality / premium in skirting, riser laid our 12mm thick cement mortar 113 including grouting the joints with white cement and matching pigments etc. complete 11. 83.1 For skirting, risers etc. glossy/ rustic /stain/matt finished in all colours and shades 11. 83.1.1 Size 600X600 mm thickness 9-10 mm 11. 83.1.2 Size 800X800mm thickness 11-12mm 11. 83.1.3 Size 600X1200 mm thickness 11-12mm 11. 83.1.4 Size 800X1200 mm thickness 11-12mm 550 11.84 Granite work gang saw cut (polished machine cut) of thickness 12 mm for wall lining, skirting, risers of steps and dado (veneer work), back filling with a grout of average 12 mm thick in cement mortar 1:3 (1 Cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the beaching by means of cramps, which shall be paid for separately). 11. 84.1 Area of tiles not less 0.18 sqm 11. 84.1.1 Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter 11. 84.1.2 Course granite light Black/light Red/ off White with crystals of other colors and various patterns 11. 84.1.3 Gray/Pink/Brown with various patterns 551 11.85 Providing and laying gang saw cut 12mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cemnt mortar 1:4(1cement:4sand) including grouting the joints with white cement mixed with matching pigments, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 11. 85.1 Area of tiles not less 0.18 sqm 11. 85.1.1 Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter 11. 85.1.2 Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns 11. 85.1.3 Gray/Pink/Brown with various patterns 552 11. 86 Providing and fixing artificial synthetic green long and fine yarns grass, UV/water resistant with SBR latex backing eco-friendly durable high density 100 % PP ( Poly Poplin ) anti UV fiber.denier 12000 dtex, stich rate 18 stiches per 10cm, stich density 16800 stiches/m2, tufted weight 1830g/sqm approx. 11. 86.1 Roll size will be 25.00m X 2.00m (25mm thick)- weight 150kg- per roll. 11. 86.2 Roll size will be 25.00m X 2.00m (40mm thick)- weight 180kg- per roll. 553 11.87 Providing and fixing laminated (engineered wooden flooring) of suitable thickness 10-14 mm of suitable grade category product of approved made out of core high density fibre board (HDF) &other component it treated for abrasion ,scratch ,moisture protection, flame protection,U.V resistant. backing with eco- friendly resins specified by the manufacturer .The material shall be applicable warranty formaldehyde free, eco friendly, highly recommended for high traffic area and fully recyclable and matching shed and excluding quantity of skirting and profile. 554 11.88 Providing and fixing single layer homogeneous (solid wooden flooring) of suitable thickness 14 - 18 mm of suitable grade category product of scratch protection, moisture protection, flame protection U.V. resistant, backing under layer on min 2 mm thickness The material shall be applicable warranty formaldehyde free, eco friendly ,highly recommended for high traffic area and fully recyclable and matching shade and excluding quantity of skirting and profile. 555 11.89 Providing and fixing tuffed 1/10” loop pile (carpet tile / Carpet). EN (Euorpean Standard) size 50cm x 50cm /roll Size of total thickness 5.5 mm and above with total mass of 4100g/m2approx and with polyester fleece primary backing with standard dimensional stability with impact sound / noise reduction and recommended for high traffic acoustical area. 556 11.90 Providing and fixing spc (stone plastic composite) virgin pvc water resistant proof vinyl flooring with a thickness between 4 to 8mmuv coated layer with a wear layer of 0.3 to 0.80mm with a SPC core layer of 2.00 to 5.00 mm with a SOP of heat resistant, voc free, easy to cut, anti microbial protection in the form of tiles, planks helpful in environmental of profection health. 557 11.91 Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone tile flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with white cement mix with matching pigment etc. complete as per direction of Engineer-in-Charge. 11. 91.1 300x300mm 11. 91.2 400x400mm 11. 91.3 600x600mm 558 11.92 Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone slab flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size of area more then .50 sqm and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with cement mix matching pigment etc. complete as per direction of Engineer -in-Charge. 559 12.1 Providing corrugated G.S. Sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.1 1.00mm thick with zinc coating not less than 275gm/m² 12.1.2 0.80mm thick with zinc coating not less than 275gm/m² 12.1.3 0.63 mm thick with zinc coating not less than 275gm/m² 560 12.2 Straight cutting in G.S. sheet of any thickness roofing for making opening of area exceeding 40 sq. decimetre for chimney stacks, sky light etc. 561 12.3 Extra for circular cutting in C.G.S. sheet of any thickness roofing for making opening of area exceeding 40 square decimetre : 562 12.4 Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 12.4.1 0.80mm thick with zinc coating not less than 275gm/m² 12.4.2 0.63mm thick with zinc coating not less than 275gm/m² 563 12.5 Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350gm/m² 564 12.6 Providing and Fixing of 40 cm over all width plain, G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 sand). 1.00mm thick with zinc coating not less than 275gm/m² 565 12.7 Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 12.7.1 0.80mm thick with zinc coating not less than 275gm/m² 12.7.2 0.63mm thick with zinc coating not less than 275gm/m² 566 12.8 Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia.G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. 567 12.9 Extra for straight cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc.. 568 12.10 Extra for circular cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. 569 12.11 Extra for providing and fixing wind ties of 40x 6 mm flat iron section. 570 12.12 Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. 12.12.1 Corrugated serrated adjustable ridges 12.12.2 Plain wing adjustable ridges 12.12.3 Close fitting adjustable ridges 12.12.4 Unserrated adjustable hips 571 12.13 Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: 12.13.1 Corrugated apron pieces 12.13.2 Eaves filler pieces 12.13.3 North light curves 12.13.4 ventilator curves 12.13.5 Barge boards 12.13.6 Ridge finials 12.13.7 Special north light curves 12.13.8 S type louvers 572 12.14 Providing flat iron brackets 50x3mm size with necessary bolts, nuts washers etc. for fixing G.S. sheets gutters with purlins. 573 12.15 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS:277 in 240 mpa steel grade, 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 574 12.16 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self- tapping screws complete : 12.16.1 Ridges plain (500 - 600mm). 12.16.2 Flashings/ Aprons.( Upto 600 mm) 12.16.3 North light curves. 12.16.4 Barge board (Upto 300 mm) 12.16.5 Crimp curve 12.16.6 Gutter. (600 mm over all girth) 575 12.17 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 12.17.1 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. 12.17.2 2mm thick flat. 576 12.18 Providing and Fixing of sky lights consisting of Multi cell/tight cell Polycarbonate Panel System of approved colour, 16 mm thick (minimum) having uniform in color with an integral Tight-Cell core constructed not to exceed 4mmx4mm in a cross section, involved such as bolts nuts and screws etc. and labour for cutting bending to required profile, necessary scaffolding, hoisting in position etc. for proper completion of the work etc. complete as per specification drawings and direction of Engineer in charge. Finished surface area of roofing fixed over steel tubular structure shall be measured for payment. MS tabular frame work shall be measured separately for payment. 12.18.1 10mm thick 12.18.2 16mm thick 577 12.19 Providing sand stone slab 40 to 50 mm thick for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 sand ) complete : 12.19.1 Red sand stone slab 12.19.2 White sand stone slab : 578 12.20 Painting top of roofs with residual type petroleum bitumen of grade VG 10 of approved quality @ 17kg per 10 sqm impregnated with a coat of sand at 60 cum per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 579 12.21 Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance and thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturers specifications and as approved by engineer In charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., and washing with water all complete. The contractor shall give guarantee for the performance of SRI and also the durability of coating, all complete as per direction of Engineer-in-charge. 580 12.22 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. 581 12.23 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 sand) and finished neat complete. 582 12.24 Providing and fixing on roof pressed clay tile (Mangalore tile) 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) 583 12.25 Providing and laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness of approved pattern on steel frame work complete (steel frame work to be paid separately) 584 12.26 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase 585 12.27 Making khurras 45x45 cm (sunk area) with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete so as to receive rain water/ spillage water on roof in a sunk area and completely rain out in a near perfect strain meter motion into rain water pipe. 586 12.28 Providing and fixing M.S. holder bat clamps of approved design to C.I. Or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 12.28.1 100 mm diameter 12.28.2 150 mm diameter 587 12.29 Providing and fixing ISI marked sand cast iron rain water pipes. 12.29.1 100 mm dia minimum wall thickness 5mm 12.29.2 150 mm dia minimum wall thickness 5mm 588 12.30 Providing lead caulked joints to sand cast iron rain water pipes and fittings : 12.30.1 100 mm dia. Pipe 12.30.2 150 mm dia. Pipe 589 12.31 Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) : 12.31.1 Sand cast iron bend : 12.31.1.1 100 mm diameter 12.31.1.2 150 mm diameter 12.31.2 Sand cast iron plain shoes : 12.31.2.1 100 mm diameter 12.31.2.2 150 mm diameter 590 12.32 Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 12.32.1 75 mm diameter (minimum wall thickness 1.8mm) 12.32.2 110 mm diameter (minimum wall thickness 2.2mm) 591 12.33 Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 12.33.1 Coupler 12.33.1.1 75 mm (minimum wall thickness 1.8mm) 12.33.1.2 110 mm (minimum wall thickness 2.2mm) 12.33.2 Single push fit Coupler : 12.33.2.1 75 mm (minimum wall thickness 1.8mm) 12.33.2.2 110 mm (minimum wall thickness 2.2mm) 12.33.3 Single tee with door 12.33.3.1 75x75x75 mm (minimum wall thickness 1.8mm) 12.33.3.2 110x110x110 mm (minimum wall thickness 2.2mm) 12.33.4 Single tee without door 12.33.4.1 75x75x75 mm (minimum wall thickness 1.8mm) 12.33.4.2 110x110x110 mm (minimum wall thickness 2.2mm) 12.33.5 Bend 87.5° 12.33.5.1 75 mm bend (minimum wall thickness 1.8mm) 12.33.5.2 110 mm bend (minimum wall thickness 2.2mm) 12.33.6 Shoe (Plain) 12.33.6.1 75 mm Shoe (minimum wall thickness 1.8mm) 12.33.6.2 110 mm Shoe (minimum wall thickness 2.2mm) 592 12.34 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 12.34.1 75 mm (minimum wall thickness 1.8mm) 12.34.2 110 mm (minimum wall thickness 2.2mm) 593 12.35 Providing and fixing to the inlet mouth of rain water pipe fixing cast iron grating 15 cm diameter and weighing not less than 440 grams. 594 12.36 Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. 595 12.37 Providing and fixing 100 mm/110 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 sand) 12.37.1 Stone ware spout 12.37.2 Upvc spout (Pipe dia.110 mm) 596 12.38 Providing and fixing of self-supported mechanically seamed roofing system, made of high quality steel, having 340 MPA yield strength, pre coated galvalume sheet as per ASTM A 792 M of base metal thickness from 0.8 mm to 1.6mm (tolerance ± 0.02mm). High grade steel sheet should have 55% aluminum and 45% zinc coating by hot-dip process of minimum 25 micron The rate includes supplying, fixing, loading unloading, hire charges of all plants machineries, anchors, fasteners, washers, bolts, epoxy, paint and all wastage etc. complete. Accessories and fixtures like hangers/clamps for installation of lighting /fixtures /utility/ duct as per requirement and ventilators, skylight can also be provided at crown/ridge by making cuts into the panels which is to be paid separately. This item shall be executed only by the agency which has all required manufacturing machineries and necessary expertise. 12.38.1 Base metal thickness 0.8mm up to span 15 meter 12.38.2 Base metal thickness 0.9mm , up to span 18 meter 12.38.3 Base metal thickness 1.0 mm, up to span 21 meter 12.38.4 Base metal thickness 1.1 mm, up to span 23 meter 12.38.5 Base metal thickness 1.2mm, up to span 25meter 12.38.6 Base metal thickness 1.3 mm, up to span 27 meter 12.38.7 Base metal thickness 1.4mm, up to span 29meter 12.38.8 Base metal thickness 1.5 mm, up to span 31 meter 12.38.9 Base metal thickness 1.6 mm, up to span 33 meter 12.38.10 Providing and fixing galvalume 1.0 mm thick clamps/hangers of size 75X140mm with saddle of 50mm dia, riveted at one side and nut and bolt at other side, to self-supported roofing system by mechanical seaming to suspend light fixture/cable stay/false ceiling/duct etc., at their location which should be planned earlier by engineer-in-charge. Clamps shall be fixed during seaming of panels. 12.38.11 Providing and fixing advanced type hurricane turbo ventilator to self- supporting roof having neck dia 600mm made of aluminum having 24 nos vertical vanes made of aluminum sheet. Ventilator should be fixed on 1 to 2mm thick G.I. ring which shall be fixed on 2mm thick polycarbonate sheet. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates i/c of all material, labour fittings screw, rings, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. 12.38.12 Providing and fixing of 2mm thick polycarbonate sheet to self-supported roofing system. The sheet shall have tensile strength and elongation as per ASTM D 638, refractive index as per ASTM D 592, light transmission as per ASTM D 1003 and specific gravity as per STM D 792. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates include of all material, labour, fittings, screw, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. 597 12.39 Supply, fabrication and erection of three-dimensional space frame steel structure consisting of support node, primary space frame members, space notes nodes, bolts, sleeves (nut), purlin stool, purlin etc. to support roof sheet in plain or curved shape. (Approximate zinc coating thickness 77 Microns) and shall not be less than 400 g/sqm (Approximate zinc coating thickness 56 microns). Bolts, sleeves and cones shall be electro-galvanized to ASTM B 633 Type 2, SC3. Shop drawings along with structural design analysis shall be provided by the manufacturer for approval of the engineer in charge. Rate shall include cost of design, all material, all lifts, labour, transport, storage, machines, tools and plants, wastages, erection and installation at site all necessary scaffolding etc. necessary to provide finished product but excluding cost of erection/construction of support shaft and roof sheet. 598 12.40 Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). 599 12.41 Providing and fixing in position roof tile under lay using 12mm thick(minimum) Moisture/fire Resistance heavy duty fibre cement board(High Pressure Steam Cured) Type A,Category 4 conforming to IS 14862:2000, fixed on Steel frame work of 610mmx610mm or 610mmx1220mm grid by counter sunk stainless screw @ 300mm C/C all complete as per the drawings. Tiles etc may be laid on the board substrate by sealing the joints properly with filler material or sealant to ensure no leakage through joints. All complete as per drawings, specification and as per direction of Engineer-in-Charge.Note - MS Section structure and roof tile like Shingles/Mangalorian Tiles etc cost will be paid seprately. 600 12.42 Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. 601 12.43 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8183, density 16kg/m3, 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. 602 12.44 Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge : 603 12.44.1 With Type N - Normal 50 mm thick 604 12.44.2 With Type SE - Self Extinguishing type 50 mm thick. 605 12.45 Providing and laying thermal insulation of roofing with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 mx2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge. 606 12.46 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in- Charge. 607 12.47 Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. 608 12.48 Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceiling and held in position by criss- crossing GI wire. 609 12.49 Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by criss cossing GI wire etc.complete as per directions of Engineer-in-Charge. 610 12.50 Supply and application of 48kg/m3 density & 50 mm thick with a tolerance of -2 + 6mm of Rockwool RB slabs unfaced (Binder<3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non- combustible when tested as per BS 476 Part 4 or A1 when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 611 12.51 Supply & Application of Rockwool RB slab 48kg density, 50mm thick wrapped in 200G vergine polythene bags for partition, ceiling (Under Deck insulation) conforming to IS: 8183 with tolerance of -2 +6mm of rock wool RB slabs unfaced (Binder <3.5%) conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested per EN 13501. . Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 612 12.52 Supply & Application of Rockwool RB 2 slab 64kg /m3, 50mm thick, with GI wire netting 24 SWG; fixing for NRC Value 1.00 for Acoustics, thermal & fire purpose conforming to and IS: 8133, IS: 8183 with tolerance of -2 + 6mm of RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Two random samples from each supplied batch will be tested for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 613 12.53 Supply & Application of Rockwool building roll (1.1mx10m) 48kg density, 50mm thick with FSK (foil scrim Kraft) aluminium foil facing for HVAC duct & building underdeck purpose conforming to IS: 8183, IS: 8183 and IS:8183 a tolerance of -2 +6 mm of Rockwool RB slabs unfaced (Binder < 3.5%) ; conforming to IS: 8183; /ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS: 476 Part 4 or Al when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and it shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 614 12.54 Supply & Application of Rockwool Building Roll (1.1mX10m) 48kg density, 50mm thick with ALG (Alu & glass) mixture of Aluminium & glass facing for building underdeck application below metal sheet also conforming IS: 8183, IS: 8183 and IS: 8183 a tolerance of -2+6mm of rockwool RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested as per EN 13501. The maximum service temperature shall be 700°C. Shot content should be less than 2% for 500 microns & less than 10% for 250 microns when tested as per standard IS: 3144. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 615 12.55 Providing and fixing of minimum 12mm thick, 5 layered bubble Reflective thermal insulation made of 12 microns aluminum foil with minimum 97% Reflectivity on both outer sides, under both aluminum foil 4mm thick FR bubble insulation with Low Emissivity - 0.032 (ASTM1371), Fire Class A (ASTM E84) All five layers of insulation shall be stick with each other by registered manufacturer using hot process without using any kind of adhesive. Insulation shall be supplied in 1.10m wide roll width with 50mm wide factory-made cuts at both sides to joint another roll by using general stapler in case of new shed and adhesive in case of existing or self-supported roof. 12.55.1 Fixing of insulation on new work by laying horizontally on the purlins and perpendicular to the direction of purlins and fixing by using self- tapping screws at equal distance. Place and align the second roll of insulation parallel to the first roll and overlaps the adjacent rolls. After Insulation is fixed over the purlins the metal sheet is placed over insulation and drilled with self-tapping screws with purlins etc. complete, including all material and scaffolding. 12.55.2 Installation of insulation in Old Sheds where the sheets have been already fixed over the purlins so insulation shall be fixed under the purlins covering the roof bottom. Insulation roll to be unfolded at the bottom of the purlin horizontally and parallel to the roof and fixed by using the self- tapping screw with a washer at equal distance etc. Complete, including all material and scaffolding. 12.55.3 Insulation of Self-Supported Roof shall be applied under the roofing by using stud welding to the self- supported roof at a distance not be more than 300 mm in both directions. At each stud insulation roll shall be pushed against the studs so that it gets punctured and then non-returning washer has to be applied at the stud etc. complete, including all material and scaffolding. 616 12.56 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over- deck on ceiling surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM C 518, compressive strength of > 350 kPa listed as per ASTM C 1621, density of 34-36 kg/m³ as per ASTM D 1622, water absorption < 1% by volume as per ASTM C 272, oxygen index of minimum 24 as per ASTM D 2863 and Fire retardant property as per DIN 4102, with preferred stone or pre-cast tiles shall be laid over the XPS board with suitable grouting including providing pre-fabricated EPDM drain outlets (Cement Screed casting shall be done at the junction of roof and parapet walls), all as per the directions of Engineer-in-charge. 617 12.57 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size underdeck on ceiling surface, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. 618 12.58 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.58.1 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board 12.58.1.1 Flat surfaces 12.58.1.2 Curved surfaces 12.58.1.3 Sunk or raised mouldings 12.58.1.4 Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. 12.58.2 12.5 mm thick tapered edge gypsum board 12.58.2.1 Plain board conforming to IS: 2095- Part I : 2011 (Board with BIS certification marks). 12.58.2.2 Fire resistant Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) 12.58.2.3 Gypsum moisture resistant board. 12.58.2.4 Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturers specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. 12.58.3 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. 619 12.59 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of mainT runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.59.1 GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 12.59.2 GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 12.59.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a ompletely sealed unit. 12.59.4 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. 12.59.5 Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty. 12.59.6 8mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primedcolour tiles of size 595X595 mm. 12.59.7 6mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primed colour tiles of size 595X595 mm. 620 12.60 Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to centre, suspending the main C carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in/swing down tiles into spring T with 12.60.1 GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 12.60.2 GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. 621 12.61 Providing & Fixing of Unperforated Antibacterial Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width and height of 32mm. The Tile will be manufactured on advanced equipment that includes several levelling stages in the manufacturing process by approved certified manufacturers. The Tile shall be clipped into clip in rail of 0.5mm thick G.I. in form of a grid system using a cross connector. The clip in rail shall be supported from slab by means of rigid Suspension of 4mm G.I.Road, Hold on Clamp with Clip. (Rate include all materials and labour). 622 12.62 Providing and fixing board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): 12.62.1 12mm thick insulating board 12.62.1.1 Natural colour insulating board 12.62.1.2 White face insulating board 12.62.1.3 Flame retardant face insulating board 12.62.2 Flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 12 mm thick marked in ceiling with necessary nails etc. complete 12.62.3 6 mm thick plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete 12.62.4 6mm thick High Pressure Steam Cured non asbestos, reinforced with cellulose fibres,Moistur& fire Resistance heavy duty fibre cement board, Type A,Category 4 conforming to IS 14862:2000.(for wet areas) 12.62.5 4 mm thick High Pressure Steam Cured non asbestos, pre-painted, self- embossed, designer cement boardType B, Category 3 conforming to IS 14862:2000 . of approved texture,design patterns 623 12.63 Extra for Circular cutting and wastages in ceiling with: board only (frame work) Natural colour insulating 12 mm thick board paid separately. 624 12.64 Extra for providing and fixing ceiling to curved surfaces in narrow widths 625 12.65 Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides and edges including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). 626 12.66 Providing and Fixing colour coated profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material. The sheet shall be fixed using self- drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape 627 12.67 Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plain or design particle board ceiling tiles. 628 12.68 Providing and fixing expanded polystyrene (thermacol) false ceiling (frame work to be paid separately) : 12.68.1 With Type N - Normal 50 mm thick 12.68.2 With Type SE - Self Extinguishing type 50 mm thick 629 12.69 Providing and fixing false ceiling with fabric fixing with nail etc. (frame work and beading to be paid separately). 12.69.1 costing upto 70/- per metre, 12.69.2 Rs 70- 150 per meter 12.69.3 Upto 200 per meter 630 12.70 Providing and fixing perforated Aluminium panel ceiling of white/ natural satin colour supplied by approved manufacturers consisting of panel of standard size with bevel edge, panel length up to 6 m, coil Coated on a Continuous Paint Line suitable for Interior application, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al. Mg) for higher strength and good roll forming characteristics. Panel carrier shall be suspended by means of G.I. threaded rod having 6 mm diameter at a distance of 1.5 mtr. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. 12.70.1 With panels of size 300mm wide X30mm deep X 0.7mm thick and panel carrier of size 40.5mm wide X 62mm deep X 0.9mm thick 12.70.2 With panels of size 150mm wide X 15.5 mm deep X 0.5mm thick and panel carrier of size 32mm wide X 39mm deep X 0.95mm thick 12.70.3 With panels of size 84mm wideX16mm deep X 0.5mm thick and panel carrier of size 62mm wide X 29mm deep X 0.95mm thick 631 12.71 Providing and fixing un-perforated Aluminium Panel ceiling Supplied by approved manufacturers of standard white/ natural satin shade consisting of panel 30 mm/80mm/130mm/180mm wide X 15 mm deep X 0.5mm /0.6mm thick respectively, with square edges having panel length up to 6 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 5050 (Al.Mg) for higher strength and good roll forming characteristics. The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a Galvanised suspension spring clip at a distance of 1.7mtrs centre to centre. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. 632 12.72 Providing and fixing U Baffle Aluminium panel ceiling of different colors and finish supplied by approved manufacturers, consisting of panel size 50 mm width X 100 mm deep using 0.6 mm thick, panel length upto 4 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 3005 (Al. Mg) for higher strength and good roll forming characteristics. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The measurements shall be wall to wall without any deductions for lights, diffuses, columns etc. As an option, ceiling area above U Baffle can be painted by the contractor in black colour or any other colour as per the architect for better aesthetics before fixing this system. 12.72.1 Standard White / Natural Satin Shade 12.72.2 Wooden Finish 633 12.73 Supply & Fixing of perforated G.I false ceiling tile or plank using torsion spring fixing system supplied by approved manufacturer comprising of tile of 600 mm wide and 600 mm long manufactured out of 0.5 mm thick or plank of 600mm wide and 1200 mm long manufactured out of 0.6mm thick galvanised steel perforated with 2 mm dia. at a distance of 5mm centre to centre. Non-woven felt made of glass- reinforced fibre glued over the perforation at the back side of panels to provide noise reduction co efficient up to 0.7 NRc. “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on centre spacing to match panel length. Cross runners 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced at a spacing of 600 mm on centre maximum. The measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. 12.73.1 Tile of 600 mm wide ,600 mm long and 0.5 mm thick 12.73.2 Plank of 600mm wide ,1200 mm long and 0.6mm thick 634 12.74 Providing and fixing of composite perforated Gypsum board with Glass wool Fiber panel of Size 595x595x25 mm with 10mm square Perforation tiles false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “ “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. 635 12.75 Providing and fixing of Composite perforated MDF board with Glass wool Fiber panel of Size 595x595x18 mm 10mm Square Perforation tiles (Square /Tegular Edge) false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. 636 12.76 Providing and fixing of Perforated Gypsum board with Acoustical Glass Fiber Tissue faced panel of Size 595x595x12.5mm, Square 10mm Perforation tiles (Square Edge) false ceiling panels in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. 637 12.77 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance≥ 85%, Thermal Conductivity k = 0.052 -0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking TGrid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling usinggalvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) 638 12.78 Providing and fixing false ceiling at all heights with 15 mm thick integral densified micro look edged non- cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.80 grams per sqm) i.e. 50 mm long, 12 mm outer diameter M-6 dash fasteners with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 639 12.79 Providing and fixing false ceiling at all heights with 15 mm thick integral densified mirolook edge with BIO SAFE coating as per ISO 7251:2005, ISO 20743:2007 and ISO 21527-1:2008, making the tiles resistant to bacterial growth in case of any external bacterial contact made onto the surface of tiles, non-cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 640 12.80 Providing and fixing in position wall panelling at all heights with 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles., non-cementitious, reinforced with fibre and natural filler, having NRC (Noise Reduction Coefficient) of 0.10-0.20 for plain and designer 0.15-0.40 for pinhole texture and NRC 0.45-0.65 for fully perforated tiles as per IS 8225:1987, sound attenuation STA-32db. of 0.75 (minimum) as per IS 8225:1987, Light Reflectance of 85% (minimum), non-combustible as per BS:476 (part-4), 50-52% recycled content including fly ash, The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fibre joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturers specification as per direction of engineer-in-charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles. 641 12.81 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 12.81.1 With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. 12.81.2 With fully perforated 10mm thick square edged GRG false ceiling tiles for sound proof and acoustic. 642 12.82 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped 387alvanized steel sections (387alvanized387 @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cros‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer- in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 643 12.83 Providing and fixing upvc plank, Plank size (340 X 2700 ) mm as per approved shade, the panel shall be laser catted end of plank fixing j-trim fixed and corner edge of ceiling fixed u pvc clip same colour and providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 125 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular,j trim end clip includes in this item any other item not be paid sepratly complete in all respect as per the directions of Engineer-in-Charge. . 644 12.84 Providing & Fixing PVC ceiling system profile panel with click system interlock panel size 4000mmx340mmx1mm resistance to weather perfect finish in wood grain & solid colour maintenance free Resistance to weather truly anti bacterial. with edge profile J-trim on periphery & center profile T-trim in panel joint Complete System to be fixed on G.I. framework of ceiling section at 450 mm distance with enter section suspended by roof by G.I. angle hanger in proper line & level etc complete . PRODUCT SPECIFICATIONS: Meets or exceeds the standard specification of (ASTM D-4477) and its referenced documents. observed. (Tested at 50 LBS) Tensile strength, MPa: >37.0 Tensile modulus, MPa: >2000 Surface distortion: None at 120F Squareness: <1/8” of square Length: Within ¼” of specification Lock control: Complies Color Change: <2 grayscales (16 hrs under 1200W/m2 UV radiation at 50 degrees) 645 12.85 Design built, supply and erection of Tensile (fabric) structure system including designing and fabrication in M.S. steel tubular structure as per Indian standard section as per approved design and shape including base plate, dash fastener, clits etc. Cutting, patterning, plotting and wielding of fabric with the help of tensile structure software. Fabric should be wielded by high frequency PVC wielding in proper line with PVC cader to be fixed on end of the fabric and to be stretched & fixed on M.S. design structure with the help of. M.S. Flat bar with self-taping screw. M.S. structure to be painted with one coat of epoxy primer with MRF PUpaint of approved colour in desired shape. With 1050 GSM tensile fabric 12.85.1 With precontraint tensile membrane 1050 GSM (20 years Warranty) 12.85.2 With precontraint tensile membrane 1050 GSM (15 Years warranty) 646 13.1 12 mm cement plaster of mix : 13.1.1 1:4 (1 cement : 4 sand) 13.1.2 1:6 (1 cement : 6 sand) 647 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix 13.2.1 1:4 (1 cement : 4 sand) 13.2.2 1:6 (1 cement : 6 sand) 648 13.3 20 mm cement plaster of mix : 13.3.1 1:4 (1 cement : 4 sand) 13.3.2 1:6 (1 cement : 6 sand) 649 13.4 12 mm cement plaster finished with a floating coat of neat cement of mix : 13.4.1 1:3 (1 cement : 3 sand) 13.4.2 1:4 (1 cement : 4 sand) 650 13.5 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 13.5.1 1:3 (1 cement : 3 sand) 13.5.2 1:4 (1 cement : 4 sand) 651 13.6 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) finished with a top layer 6mm thick cement plaster 1:4 (1 cement : 4 sand). 652 13.7 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 sand) finished rough with sponge. 653 13.8 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 654 13.9 6 mm cement plaster 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. 655 13.10 Neat cement punning 656 13.11 Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Finished with ordinary cement. 657 13.12 Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. 658 13.13 Providing sand faced plaster upto 10meter hight above ground level concrete or brick masonry surfaces in two coats, base coat of 13 mm thick in cement mortar 1:4 (1 cement: 4 sand), clearing the surface by combing it and finishing coat of 8 mm. thick in cement mortar 1:3 (1 cement: 3 sand) and taking out surface grains by mechanical arrangement or applying second coat by mechanical means including cost of all material, labour, and T and P including all lead, lift and scaffolding etc. complete. 659 13.14 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 660 13.15 Extra for plastering 13.15.1 Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof 13.15.2 Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof 661 13.16 Extra for plastering on circular work not exceeding 6 m in radius: 13.16.1 In one coat 13.16.2 In two coats 662 13.17 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: 13.17.1 In one coat 13.17.2 In two coats 663 13.18 Extra for plastering Spherical, Groined ceiling, Flewing soffits. 13.18.1 Spherical ceiling 13.18.2 Groined ceiling 13.18.3 Flewing soffits 664 13.19 Washed stone grit plaster on exterior walls of height upto 10 M. above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings,complete as per specification and direction of Engineer- in- charge (Payment for providing grooves shall be made separately). 665 13.20 Forming groove of uniform size 20 or 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 666 13.21 Extra for washed grit plaster on exterior/interior walls of height more than 10m from ground/floor level for every additional height of 3 m or part thereof. 667 13.22 Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). 668 13.23 Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. 669 13.24 Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. 670 13.25 Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part -1 and II) 1976, applied on hacked/ uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations,excluding in wall which may come in contact with dampness finished in smooth line and level etc. complete. 671 13.26 Extra for addition of synthetic Polyester triangular fibre of length 6mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125gms. Of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. 672 13.27 Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete 673 13.27.1 G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height. 13.27.2 Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height. 674 13.28 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 sand) : 13.28.1 Flush Band 13.28.2 Sunk Band 13.28.3 Raised Band 13.28.4 Moulded Band 675 13.29 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 sand): 13. 29.1 Flush Band 13. 29.2 Sunk Band 13. 29.3 Raised Band 13. 29.4 Moulded Band 676 13.30 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 sand) top layer 6mm thick with cement mortar 1:4(1 cement : 4 sand). 677 13.31 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 sand) : 13.31.1 Flush / Ruled/ Struck or weathered pointing. 13.31.2 Raised and cut pointing 13.31.3 Sunk pointing 678 13.32 Pointing on stone work with cement mortar 1:3 (1 cement: 3 sand). 13.32.1 Flush/ Ruled pointing 13.32.2 Raised and cut pointing 679 13.33 Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust) 680 13.34 Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 sand): Flush/ Ruled pointing 681 13.35 Extra for pointing on walls on the outside/inside at height more than 10 metre from ground/floor level for every additional height of 3 m or part there of. 682 13.36 Providing and fixing broken glass in cement mortar 1.3 including cost of mortar, over compound walls. 683 13.37 Providing and fixing writing board green writing with chalk (regular modified polyster coated steel surface). of sizes. 13.37.1 size 1200mmx1800mm 13.37.2 size 1200mmx2400mm 13.37.3 size 1200mmx3000mm 684 13.38 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 685 13.39 Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. 686 13.40 Extra for lining out plaster to imitate stone or concrete blocks walling. 687 13.41 Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. 688 13.42 Providing and applying special putty in two coats based materials varnish, Belgium chalk, turpentine oil, white paint, safeda including sand papering for making the surface smooth for applying any or vinyl paints including all cost of material and labouretc complete. 689 13.43 White washing with lime to give an even shade: New work (three or more coats) 690 13.44 Colour washing such as green, blue or buff to give an even shade: New work (two or more coats) with a base coat of white washing with lime. 691 13.45 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 grams/ltr of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coat on new work. 692 13.46 Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work 693 13.47 Distempering by any mechanical or manual means with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.47.1 One coat. 13.47.2 Two coats. 694 13.48 Wall painting by any mechanical or manual means with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.48.1 One coat. 13.48.2 Two coats. 695 13.49 Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. 696 13.50 Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm). 697 13.51 Finishing walls by only mechanical or manual means with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. 698 13.52 Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface 699 13.53 Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) 700 13.54 Finishing walls by any mechanical or manual means with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.54.1 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture 13.54.2 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture. 13.54.3 Two or more coats applied on walls @ 1.25 ltr/10 sqm. Over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. 701 13.55 Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: 13.55.1 One coat 13.55.2 Two coats 702 13.56 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. 13.56.1 On steel work 13.56.2 On concrete work 703 13.57 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. 704 13.58 Applying a coat of mordant solution on G.S. sheet : 13.58.1 With a solution of 38 gms of copper acetate in a litre of soft water 13.58.2 With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. 705 13.59 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture over and including a priming of ready mixed zinc chromate yellow primer on new work : 13.59.1 75 mm diameter pipes 13.59.2 100 mm diameter pipes 13.59.3 150 mm diameter pipes 706 13.60 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 13.60.1 75 mm diameter pipes 13.60.2 100 mm diameter pipes 13.60.3 150 mm diameter pipes 707 13.61 Painting with oil type wood preservative of approved brand and manufacture: New work (two or more coats) 708 13.62 Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. 709 13.63 Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. 710 13.64 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 711 13.65 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 712 13.66 Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 13.66.1 One coat. 13.66.2 Two coats. 713 13.67 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. 13.67.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. 13.67.2 With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. 13.67.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. 714 13.68 Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. 715 13.69 Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. 716 13.70 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 717 13.71 Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work 718 13.72 Varnishing with varnish of approved brand and manufacture: 13.72.1 Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. 13.72.2 Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. 719 13.73 French spirit polishing: Two or more coats on new works including a coat of wood filler. 720 13.74 Polishing on wood work with ready mixed wax polish of approved brand and manufacture: New work. 721 13.75 Lacqer polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying lacqer polish with air compressor. Two or more coats on new works including a coat of wood filler. 722 13.76 Mealamine polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler. 723 13.77 Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. 724 13.78 Lettering with black Japan paint of approved brand and manufacture. 725 13.79 Providing and applying flakes textured homogeneous wall finishing system consisting of a two component system of dry flakes (9.5kgs per/pack) made of a special grade of heat treated China clay with rigid homopolymer coated with fade resistant pigments and a 100% acrylic polymer Bonding agent (5kgs/pack) applied thickness of the coating being between 0.8-1.2mm, to be applied in single coat, on a cured, smooth level plaster surface without keying, as per the shades/ combinations approved, as per manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per direction/ supervision of the engineers-in-charge inclusive of one coat of primer on the base at all heights etc all complete. 726 13.80 Providing and applying Granules homogeneous wall finishing system consisting of a two component system of dry granules (25 kgs/pack) made of 92% silica particles coated with fade resistant pigments and a 100% acrylic Polymer Bonding agent (5 kgs/pack) with the applied thickness of coating as required to be applied in single coat, on a cured. Smooth level plaster surface without keying as per the shades/combinations approved. As per the manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per the directions/supervision of engineers in charge, all complete inclusive of primer on the base. 13.80.1 0.8-1.2mm thickness 13.80.2 2.0-2.5mm thickness 727 13.81 Providing and Applying Roto Wall finishing system being a dispersion of inorganic fillers, calcite, pure silica, quartz and broad spectrum fungicides stabilized by an acrylic co-polymer, to be applied by means of customized trowels (one for incorporating material on base and spreading and other for finishing) in single coat with a coating thickness of 2.0-2-2.5mm on a cured smooth level plaster without keying, by the approved applicator of manufacturer, of the approved shade as per directions for usage all inclusive including primer coat on the base. 728 13.82 Providing and plastering over AAC masonary wall with polymer modified cement based readymix factory controlled mortar with self curing, eco- friendly, wet premix in a mechanical mixer in thickness as specified below, and covering area of 2.04 kg per sqm/mm thickness. The Bulk density of ready mix plaster may vary from 1300 to 1600 Kg/cum, Water powder ratio (as per manufacture’s direction) may vary from 18-22 % by weight or as specified by the manufacturer and compressive strength may vary from 8-9 Mpa. 13.82.1 6 mm thick plaster for internal walls 13.82.2 8 mm thick plaster for external walls exposed to weather. 729 13.83 Providing and fixing including Designing and UV printing on aluminium composite material (ACM) sheet in different sizes with 720DPI (Dot per inch) 13.83.1 ACP sheet 2mm thick 13.83.2 ACP sheet 3mm thick 13.83.3 ACP sheet 4mm thick 730 13.84 Providing and fixing including designing and UV printing on pvc foam sheet of different size with 720 DPI (Dot per inch) 13.84.1 PVC foam sheet 3.0 mm thick 13.84.2 PVC foam sheet 5.0 mm thick 13.84.3 PVC foam sheet 8.0 mm thick 731 13.85 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. 732 13.86 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over outer wall surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM and Fire retardant property as per DIN 4102, Part 1. XPS insulation of thickness 50mm shall be placed over brushed, algae free and levelled external wall by connecting the ship-laps joints and fixed by the washer and Self-Tapping Screw of suitable length at each corner and at distance 75mm from the edge and bitumen shall be applied over the joints and G.I. Expanded Mesh (Barfi Jali) shall be fixed over XPS board by a Self- Tapping Screw of suitable length at the centre of the board and 15mm PCC shall be applied over the board (paint of suitable choice can be used), all as per the directions of Engineer-in-Charge. 733 13.87 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compressive strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D 1622, water absorption < 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. 734 13.88 Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) 735 13.89 Scrapping/sand papering of existing surface with the help of mechanized sanding machine (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) as per direction of Engineer-in- Charge. 736 13.90 Providing and applying 1 coat of Triple booster primer-resist dampness, efflorescence, alkali & at the same time improve top coat coverage by 15-20% @1.0 lt/ 10 sqm, which confirms certfication of IS 109/1968. It can be applied by Brush/ Spray Machine and the work shall be carried out as per secification& the direction of the Engineer-in-Charge. 737 13.91 Finishing walls with water based anti- germ paint of with VOC < 50 g/l, that kills disease causing germs, teflon based washability and Anti fungal properties in two or more coats @ 1.08 ltr / 10 sqm over priming coat of interior primer applied @ 1.08 ltr / 10 sqm of required shade including removing of all dust complete as per direction of Engineer- in-Charge and submission of challans of materials on enquiry. 738 13.92 Providing and applying in two coats of 250 micron thick each layer of epoxy coating on prepared surface (cost includes preparing the plastered surface smooth ready to receive epoxy coating) for operation theater walls in desired colour as per direction of Engineer-in-Charge. 739 14.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand). 740 14.2 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : 14.2.1 Door chowkhats 14.2.2 Window chowkhats 14.2.3 Clerestory window chowkhats 741 14.3 Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats) including cost of dash fasteners/ chemical fastener. 742 14.4 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish as directed by Engineer- in-charge. For door/ window/ clerestory window. 743 14.5 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 14.5.1 Float glass panes of thickness 4 mm 14.5.2 Float glass panes of thickness 5.5 mm 744 14.6 Renewing glass panes with now wooden fillets wherever necessary: 14.6.1 Float glass panes of thickness 4 mm 14.6.2 Float glass panes of thickness 5.5 mm 745 14.7 Renewing glass panes and refixing existing wooden fillets: 14.7.1 Float glass panes of thickness 4 mm 14.7.2 Float glass panes of thickness 5.5 mm 746 14.8 Supplying and fixing new wooden fillets wherever necessary: 14.8.1 2nd class teak wood fillets 14.8.2 Haldu/Bija/Kail wood fillets. 747 14.9 Renewal of old putty of glass panes (length). 748 14.10 Refixing old glass panes with putty and nails. 749 14.11 Fixing old glass panes with wooden fillets (excluding cost of fillets). 750 14.12 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 751 14.13 Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead : 14.13.1 Red/ white sand stone slabs 30 to 50 mm thick. 752 14.14 Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : 14.14.1 Sal wood battens. 753 14.15 Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : 14.15.1 Not exceeding 4.00 metres in length. 14.15.1.1 Sal wood beams 14.15.1.2 Haldu/Bija/Kail wood fillets. 14.15.2 Above 4.00 metres and upto 5.00 metres length. 14.15.2.1 Sal wood beams 14.15.2.2 Haldu/Bija/Kail wood fillets. 754 14.16 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. 755 14.17 Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. 756 14.18 Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand and manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. 757 14.19 Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. 758 14.20 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. 14.20.1 Wheel 50 mm dia. and below. 14.20.2 Wheel above 50 mm dia. 759 14.21 Providing and fixing 25 mm thick shutters for cupboard etc. : 14.21.1 Panelled or panelled and glazed shutters : 14.21.1.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 14.21.1.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 14.21.2 Glazed shutters : 14.21.2.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 14.21.2.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 760 14.22 Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35mm apart (frames to be paid separately) including fixing 50x12mm beading complete with: 14.22.1 Second class teak wood. 14.22.2 Hard wood, finger jointed 761 14.23 Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 14.23.1 20 mm diameter. 14.23.2 25 mm diameter. 762 14.24 Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. 763 14.25 Providing joists (karries) including hoisting fixing in position and applying wood preservative on unexposed surface etc. complete with: 14.25.1 Sal wood. 14.25.2 Haldu/Bija/Kail wood. 764 14.26 White washing with lime old work to give an even shade : 14.26.1 two or more coats 14.26.2 one or more coats 765 14.27 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 766 14.28 Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. 767 14.29 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (one or more coats). 768 14.30 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 769 14.31 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Old work (one or more coats). 770 14.32 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 14.32.1 75 mm diameter pipes 14.32.2 100 mm diameter pipes 14.32.3 150 mm diameter pipes 771 14.33 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved brand and manufacture on old work : 14.33.1 75 mm diameter pipes 14.33.2 100 mm diameter pipes 14.33.3 150 mm diameter pipes 772 14.34 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 14.34.1 75 mm diameter pipes 14.34.2 100 mm diameter pipes 14.34.3 150 mm diameter pipes 773 14.35 Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) 774 14.36 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. 775 14.37 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. 776 14.38 Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. 777 14.39 Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. 778 14.40 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: One or more coats on old work. 779 14.41 French spirit polishing: One or more coats on old work. 780 14.42 Mealamine polishing on wood work by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying Mealamine polish with air compressor. One or more coats on old work. 781 14.43 Lacquer polishing on wood work by preparing the surface applying putty base course. prepare the surface smooth by sand papering and then applying Lacquer polish with air compressor 14.43.1 One or more coats on old work. 782 14.44 Polishing on wood work with readymade wax polish of approved brand and manufacture : 14.44.1 Old work 783 14.45 Re-lettering with black Japan paint of approved brand and manufacture. 784 14.46 Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. 785 14.47 Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin : 14.47.1 32 mm dia 14.47.2 40 mm dia 786 14.48 Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. As per manufacturers specification. One or more coats on old work. 787 14.49 Finishing walls with water proofing cement paint of required shade : 14.49.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. 14.49.2 Old work (one or more coats @ 2.20 kg/10 sqm) complete. 788 14.50 Finishing walls with textured exterior paint of required shade : 14.50.1 Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. 14.50.2 Old work (One or more coats) applied @ 1.82 ltr/10 sqm. 789 14.51 Finishing walls with Acrylic Smooth exterior paint of required shade : 14.51.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). 14.51.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm). 790 14.52 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 14.52.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. 14.52.2 Old work (one or more coats applied @ 0.83 ltr/10 sqm). 791 14.53 Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 14.53.1 One or more coats applied on walls @ 0.85 ltr/10 sqm. 14.53.2 Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied @0.70 ltr/10 sqm 14.53.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @0.70 ltr/10 sqm. 792 14.54 Varnishing with varnish of approved brand and manufacture: 14.54.1 One or more coats with copal varnish. 14.54.2 One or more coats with spar varnish. 793 14.55 Melamine polishing on wood work (one or more coat). Old work 794 14.56 Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. 795 14.57 Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coat on old work. 796 14.58 40 mm thick stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone / White sand stone) stone to be supplied by the department. 14.58.1 Rough chiseled dressed stone 14.58.2 Fine dressed stone 797 14.59 Coursed rubble masonry (second sort) with hard stone in Cement mortar 1:6 (1 cement : 6 sand) (Stone shall be supplied by the department) 798 14.60 Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of sand, filling the joints with sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). 799 14.61 Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand) including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in- charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). 800 14.62 Colour washing with lime to give an even shade: 14.62.1 (one or more coats) 14.62.2 (two or more coats) 801 14.63 Conducting adequate nos. of scanning to detect the steel reinforcement in existing RCC elements by using ground/ Wall penetrating radar system to avoid the cutting of Main bars during drilling for inserting bolts etc. complete. 802 14.64 Chipping, Removing, Carefully loose plaster and Concrete work by low impact Hammer, Breaker without damaging the structure as Instructed by Engineer-in-Charge. 803 14.70 Rebaring of TMT bars by drilling hole & embedding bars of different diameter using epoxy grouting compound including all tools and tackles complete. 14.70.1 8 mm dia bar 10 mm dia hole 14.70.2 10 mm dia bar 12 mm dia hole 14.70.3 12 mm dia bar 16 mm dia hole 14.70.4 16 mm dia bar 20 mm dia hole 14.70.5 20 mm dia bar 25 mm dia hole 14.70.6 25 mm dia bar 32 mm dia hole 14.70.7 32 mm dia bar 40 mm dia hole 804 14.71 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 14.71.1 125x70x4 mm (ordinary type) 14.71.2 100x70x4 mm (ordinary type) 14.71.3 75x65x4 mm (heavy type) 14.71.4 75x40x2.5 mm (ordinary type) 14.71.5 50x40x2.5 mm (ordinary type) 805 14.72 Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. 806 14.73 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. 807 14.74 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of f tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 808 14.75 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer- incharge. 809 14.77 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 14.77.1 Bars upto 12 mm diameter 14.77.2 Bars above 12 mm diameter 810 14.78 Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. 14.78.1 Upto and including 12mm dia 811 14.83 Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) 14.83.1 Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work 14.83.2 Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. 14.83.3 Epoxy injection grout in concrete/RCC work of approved make 812 14.85 Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. 813 14.88 Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of L shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-incharge. 814 15.1 Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-Charge. 815 15.2 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). 816 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. 817 15.4 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. work (Payment shall be made on the cross sectional area of R.C.C. work) as per direction of Engineer-in- Charge. 818 15.5 Extra for scrapping, cleaning and straightening reinforcement from R.C.C. work. 819 15.6 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. 820 15.6.1 In lime mortar with old mughal bricks. 15.6.2 In lime mortar. 15.6.3 In cement mortar. 821 15.7 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : 15.7.1 From brick work in lime mortar. 15.7.2 From brick work in cement mortar. 822 15.8 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge: 15.8.1 In lime mortar. 15.8.2 In cement mortar. 823 15.9 Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge: 15.9.1 In lime mortar. 15.9.2 In cement mortar. 824 15.10 Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) : 15.10.1 In lime mortar. 15.10.2 In cement mortar. 825 15.11 Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. 15.11.1 For thickness of tiles 10 mm to 25 mm. 15.11.2 For thickness of tiles above 25 mm and upto 40 mm. 826 15.12 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 827 15.13 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 828 15.14 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.14.1 Of area 3 sq. metres and below. 15.14.2 Of area beyond 3 sq. metres. 829 15.15 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: 15.15.1 Of area 3 sq. metres and below. 15.15.2 Of area beyond 3 sq. metres. 830 15.16 Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: 15.16.1 Of sectional area below 40 square centimetres. 15.16.2 Of sectional area 40 square centimetres and above. 831 15.17 Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres : 15.17.1 Of sectional area below 40 square centimetres. 15.17.2 Of sectional area 40 square centimetres and above. 832 15.18 Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres : 15.18.2 Of sectional area below 40 square centimetres. 15.18.1 Of sectional area 40 square centimetres and above. 833 15.19 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: 15.19.1 R.S. Joists 15.19.2 Channels, angles, tees and flats 834 15.20 Dismantling steel work in built up sections with span upto 10 meter and hieght 5 meter in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. 835 15.21 Dismantling steel work manually/ by mechanical means in built up sections with span upto 10 meter and hieght 5 meter without dismembering and stacking within 50 metres lead as per direction of Engineer-in-Charge. 836 15.22 Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metres 837 15.23 Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. 838 15.24 Extra for marking of structural steel work required to be re- erected. 839 15.25 Removal of old Tarfelt i/c disposal as directed by Engineer in charge. 840 15.26 Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 841 15.27 Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: 15.27.1 G.S. Sheet 15.27.2 Asbestos/ Non asbestors sheet 842 15.28 Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 843 15.29 Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 844 15.30 Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. 845 15.31 Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of : 15.31.1 T’ or ‘L’ iron or pipe 15.31.2 R.C.C. 846 15.32 Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the same within 50 metres lead. 847 15.33 Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. 848 15.34 Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead. 849 15.35 Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. 850 15.36 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : 15.36.1 Upto 10 mm thick 15.36.2 Thickness above 10 mm upto 25 mm 15.36.3 Thickness above 25 mm upto 40 mm 851 15.37 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: 15.37.1 Thickness upto 40 mm 15.37.2 Thickness above 40 mm upto 75 mm 852 15.38 Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. 853 15.39 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 15.39.1 75 to 80 mm dia pipe. 15.39.2 100 mm dia pipe 15.39.3 150 mm dia pipe 854 15.40 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge : 15.40.1 15 mm to 40 mm nominal bore 15.40.2 Above 40 mm nominal bore 855 15.41 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 metre lead as per direction of Engineer-in-Charge: 15.41.1 Upto 150 mm diameter 15.41.2 Above 150 mm dia upto 300 mm dia. 15.41.3 Above 300 mm diameter 856 15.42 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. 857 15.43 Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. 858 15.44 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 859 15.45 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 860 15.46 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres 15.46.1 Upto 150 mm diameter 15.46.2 Above 150 mm diameter 861 15.47 Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. 862 15.48 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 863 15.49 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge. 864 15.50 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: 15.50.1 100 mm diameter 15.50.2 150 mm diameter 15.50.3 200 mm diameter 15.50.4 250 mm diameter 15.50.5 300 mm diameter 15.50.6 350 mm diameter 15.50.7 400 mm diameter 15.50.8 440 mm diameter 865 15.51 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead : 15.51.1 Rectangular manhole 90x80 cm and 45 cm deep 15.51.2 Rectangular manhole 120x90 cm and 90 cm deep. 15.51.3 Rectangular arch type manhole 140x90cm and 2.45m deep. 15.51.4 Circular manhole 122 cm diameter and 1.68 m deep 866 15.52 Extra for depth of manholes dismantled: 15.52.1 Rectangular manhole 90x80 cm and beyond 45 cm depth. 15.52.2 Rectangular manhole 120x90 cm and beyond 90 cm depth. 15.52.3 Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). 15.52.4 Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). 867 15.53 Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge. 868 15.54 Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : 869 15.55 Demolishing mud phaska in terracing and disposal of material within 50 metres lead. 870 15.56 Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 871 15.57 Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. 872 15.58 Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge : 15.58.1 Water bound macadam road 15.58.2 Bituminous road 873 15.59 Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge : 15.59.1 Up to 600 mm diameter 15.59.2 Above 600 mm diameter 874 15.60 Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge 15.60.1 Up to 150 mm diameter 15.60.2 Above 150 mm diameter 875 15.61 Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling the excavated gap, stacking the useful materials near the site and disposal of unserviceable materials within 50 metres lead. 876 15.62 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead: 15.62.1 120 x 120 cm (outside to outside) 15.62.2 210 x 120 cm (outside to outside) 877 15.63 Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in- charge. 878 15.64 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 879 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. 17.1.2 Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. 880 17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid 17.2.2 W.C. pan with ISI marked black solid plastic seat and lid 17.2.3 Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. 881 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. 17.3.2 W.C. pan with ISI marked black solid plastic seat and lid. 882 17.4 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with 10 liter low level flushing cistern i/c C.P. flush bend. 883 17.5 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 884 17.6 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.6.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern. 17.6.2 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. 17.6.3 Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern. 17.6.4 Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. 885 17.7 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever require 17.7.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. 17.7.2 Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. 17.7.3 Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. 17.7.4 Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. 886 17.8 Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : 17.8.1 Single squatting plate with 5 litre P.V.C. automatic flushing cistern. 17.8.2 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. 17.8.3 Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. 17.8.4 Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. 887 17.9 Providing and fixing white vitreous china water less urinal of size 600x330x315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. 888 17.10 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge. 889 17.11 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : 17.11.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. 17.11.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. 17.11.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. 17.11.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. 17.11.5 White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. 17.11.6 White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. 17.11.7 White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. 17.11.8 White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated lever ISI marked. 17.11.9 White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. 17.11.10 Oval shape wash basin over counter /under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly). 17.11.11 Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap 17.11.12 Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. 890 17.12 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 891 17.13 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. 892 17.14 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 17.14.1 Kitchen sink with drain board 17.14.1.1 510x1040 mm bowl depth 250mm. 17.14.1.2 510x1040 mm bowl depth 225mm. 17.14.1.3 510x1040 mm bowl depth 200mm. 17.14.1.4 510x1040 mm bowl depth 178mm. 17.14.2 Kitchen sink without drain board 17.14.2.1 610x510 mm bowl depth 200 mm. 17.14.2.2 610x460 mm bowl depth 200 mm. 17.14.2.3 470x420 mm bowl depth 178 mm. 893 17.15 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : 17.15.1 Size450x300x150mm 17.15.2 Size600x450x200mm 894 17.16 Providing and fixing White glazed fire clay draining board of size 600x450x25mm with C.I. brackets including painting of brackets, cutting and making good the walls wherever required. 895 17.17 Providing and fixing white vitreous china water closet squatting pan (Indian type) 17.17.1 Long pattern W.C. pan of size 580 mm 17.17.2 Orissa pattern W.C. pan of size 580x440 mm 896 17.18 Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm 897 17.19 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. 898 17.20 Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. 899 17.21 Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 17.21.1 250x130x30 mm 17.21.2 250x125x25 mm 900 17.22 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity 17.22.1 White 17.22.2 coloured 901 17.23 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush capacity) 17.23.1 White 17.23.2 Coloured 902 17.24 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : 17.24.1 White 17.24.2 Black 17.24.3 Coloured (other than black and white) 903 17.25 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. 904 17.26 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively. 905 17.27 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm. 906 17.28 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. 907 17.29 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : 17.29.1 Flat back wash basin of size 630x450mm. 17.29.2 Flat back wash basin of size 550x400mm. 17.29.3 Angle back wash basin of size 600x480mm. 17.29.4 Angle back wash basin of size 400x400mm. 17.29.5 Flat back wash basin of size 450x300mm. 17.29.6 Surgeon type wash basin of size 660x460mm. 908 17.30 Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm. 909 17.31 Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings: 17.31.1 Size 450x300x150 mm. 17.31.2 Size 600x450x200 mm. 910 17.32 Providing and fixing soil, waste and vent pipes: 17.32.1 Sand cast iron socket and spigot (S&S) pipe as per IS: 1729 17.32.1.1 75 mm dia with wall thickness of 5 mm 17.32.1.2 100 mm dia with wall thickness of 5 mm 17.32.2 Spun cast iron socket and spigot (S&S) pipe as per IS: 3989 17.32.2.1 75 mm dia with wall thickness of 3.5 mm 17.32.2.2 100 mm dia with wall thickness of 4 mm 17.32.2.3 150mm dia with wall thickness of 5mm 17.32.3 Hubless Centrifugally cast (spun) iron pipe epoxy coated in side & out side including complete coupling assembly (EPDM rubber gasket stainless steel claim and external metallic/ protective shield as per IS:15905) 17.32.3.1 75 mm dia with wall thickness of 3.5 mm 17.32.3.2 100 mm dia with wall thickness of 3.5mm 17.32.3.3 150mm dia with wall thickness of 4 mm 911 17.33 Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 sand) in S.C.I./ C.I. Pipes : 17.33.1 75 mm dia pipe 17.33.2 100 mm dia pipe 912 17.34 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : 17.34.1 For 75 mm dia pipe 17.34.2 For 100 mm dia pipe 17.34.3 For 150 mm dia pipe 913 17.35 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.35.1 150 mm dia 17.35.1.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.35.1.2 Spun cast iron as per IS – 3989 minimum wall thickness 5 mm 17.35.1.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 17.35.2 100 mm dia 17.35.2.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.35.2.2 Spun cast iron as per IS – 3989 minimum wall thickness 4 mm 17.35.2.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 17.35.3 75 mm dia 17.35.3.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5 mm 17.35.3.2 Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm 17.35.3.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 914 17.36 Providing and fixing plain bend of required degree. 17.36.1 150 mm dia 17.36.1.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.36.1.2 Spun cast iron as per IS – 3989 minimum wall thickness 5 mm 17.36.1.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 17.36.2 100 mm dia 17.36.2.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.36.2.2 Spun cast iron as per IS – 3989 minimum wall thickness 4 mm 17.36.2.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 17.36.3 75 mm dia 17.36.3.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.36.3.2 Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm 17.36.3.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 915 17.37 Providing and fixing heel rest sanitary bend 17.37.1 100 mm dia 17.37.1.1 Sand cast iron as per IS - 1729 17.37.1.2 Spun cast iron as per IS - 3989 17.37.2 75 mm dia 17.37.2.1 Sand cast iron as per IS - 1729 17.37.2.2 Spun cast iron as per IS - 3989 916 17.38 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 17.38.1.1 150X150X150X150 17.38.1.2 Sand cast iron as per IS - 3989 17.38.2 100x100x100x100mm 17.38.2.1 Sand cast iron as per IS - 1729 17.38.2.2 Spun cast iron as per IS - 3989 17.38.3 75x75x75x75mm 17.38.3.1 Sand cast iron as per IS - 1729 17.38.3.2 Spun cast iron as per IS - 3989 917 17.39 Providing and fixing double equal plain junction of required degree. 17.39.1 150X150X150X150 mm 17.39.1.1 Sand cast iron as per IS - 3989 17.39.2 100x100x100x100mm 17.39.2.1 Sand cast iron as per IS – 1729 17.39.2.2 Spun cast iron as per IS – 3989 17.39.2.3 Hubless cast(spun) iron as per IS- 15905 17.39.3 75x75x75x75 mm 17.39.3.1 Sand cast iron as per IS – 1729 17.39.3.2 Spun cast iron as per IS – 3989 17.39.3.3 Hubless cast(spun) iron as per IS- 15905 918 17.40 Providing and fixing single equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.40.1 150X150X150 mm 17.40.1.1 Spun cast iron as per IS - 3989 17.40.2 100x100x100 mm 17.40.2.1 Sand cast iron as per IS - 1729 17.40.2.2 Spun cast iron as per IS - 3989 17.40.3 75x75x75 mm 17.40.3.1 Sand cast iron as per IS - 1729 17.40.3.2 Spun cast iron as per IS - 3989 919 17.41 Providing and fixing single equal plain junction of required degree : 17.41.1 150X150X150 mm 17.41.1.1 Spun cast iron as per IS - 3989 17.41.2 100x100x100 mm 17.41.2.1 Sand cast iron as per IS – 1729 17.41.2.2 Spun cast iron as per IS – 3989 17.41.2.3 Hubless cast(spun) iron as per IS- 15905 17.41.3 75x75x75 mm 17.41.3.1 Sand cast iron as per IS – 1729 17.41.3.2 Spun cast iron as per IS – 3989 17.41.3.3 Hubless cast(spun) iron as per IS- 15905 920 17.42 Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x75x75 mm 17.42.1 Sand cast iron as per IS - 1729 17.42.2 Spun cast iron as per IS - 3989 921 17.43 Providing and fixing double unequal plain junction of required degree: 100x100x75x75 mm 17.43.1.1 Sand cast iron as per IS – 1729 17.43.1.2 Spun cast iron as per IS – 3989 17.43.1.3 Hubless cast(spun) iron as per IS- 15905 922 17.44 Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75 mm 17.44.1 Sand cast iron as per IS - 1729 17.44.2 Spun cast iron as per IS - 3989 923 17.45 Providing and fixing single unequal plain junction of required degree : 100x100x75 mm 17.45.1 Sand cast iron as per IS – 1729 17.45.2 Spun cast iron as per IS – 3989 17.45.3 Hubless cast(spun) iron as per IS- 15905 924 17.46 Providing and fixing double equal plain invert branch of required degree: 17.46.1 100x100x100x100 mm 17.46.1.1 Sand cast iron as per IS - 1729 17.46.1.2 Sand cast iron as per IS - 3989 17.46.1.3 Hubless cast(spun) iron as per IS- 15905 17.46.2 75x75x75x75 mm 17.46.2.1 Sand cast iron as per IS - 1729 17.46.2.2 Spun cast iron as per IS - 3989 925 17.47 Providing and fixing single equal plain invert branch of required degree: 17.47.1 100x100x100 mm 17.47.1.1 Sand cast iron as per IS - 1729 17.47.1.2 Sand cast iron as per IS - 3989 17.47.1.3 Hubless cast(spun) iron as per IS- 15905 17.47.2 75x75x75 mm 17.47.2.1 Sand cast iron as per IS - 1729 17.47.2.2 Sand cast iron as per IS - 3989 17.47.2.3 Hubless cast(spun) iron as per IS- 15905 926 17.48 Providing and fixing double unequal invert branch of required degree : 100x100x75x75 mm 17.48.1 Sand cast iron as per IS - 1729 17.48.2 Spun cast iron as per IS - 3989 927 17.49 Providing and fixing single unequal plain invert branch of required degree : 100x100x75 mm 17.49.1 Sand cast iron as per IS - 1729 17.49.2 Spun cast iron as per IS - 3989 17.49.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 928 17.50 Providing and fixing sand cast iron S&S off sets as per IS: 1729 17.50.1 76 mm off sets 17.50.1.1 With 75 mm dia pipe 17.50.1.2 With 100 mm dia pipe 17.50.2 114 mm off sets 17.50.2.1 With 75 mm dia pipe 17.50.2.2 With 100 mm dia pipe 17.50.3 152 mm off sets 17.50.3.1 With 75 mm dia pipe 17.50.3.2 With 100 mm dia pipe 929 17.51 Providing and fixing sand cast iron S&S off sets as per IS: 3989. 17.51.1 75 mm off sets 17.51.1.1 With 75 mm dia pipe 17.51.1.2 With 100 mm dia pipe 17.51.1.3 With 150 mm dia pipe 17.51.2 150 mm off sets 17.51.2.1 With 75 mm dia pipe 17.51.2.2 With 100 mm dia pipe 17.51.2.3 With 150 mm dia pipe 930 17.52 Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete : 17.52.1 100 mm 17.52.1.1 Sand cast iron as per IS - 1729 17.52.1.2 Spun cast iron as per IS - 3989 17.52.2 75 mm 17.52.2.1 Sand cast iron as per IS - 1729 17.52.2.2 Spun cast iron as per IS - 3989 931 17.53 Providing and fixing terminal guard: 17.53.1 150mm 17.53.1.1 Sand cast iron as per IS - 1729 17.53.1.2 Spun cast iron as per IS - 3989 17.53.1.3 Hubless cast(spun) iron as per IS- 15905 17.53.2 100 mm 17.53.2.1 Sand cast iron as per IS - 1729 17.53.2.2 Spun cast iron as per IS - 3989 17.35.2.3 Hubless cast(spun) iron as per IS-15905 17.53.3 75 mm 17.53.3.1 Sand cast iron as per IS - 1729 17.53.3.2 Spun cast iron as per IS - 3989 17.53.3.3 Hubless cast(spun) iron as per IS- 15905 932 17.54 Providing and fixing collar: 17.54.1 100 mm 17.54.1.1 Sand cast iron S & S as per IS - 1729 17.54.1.2 Sand cast iron S & S as per IS - 3989 17.54.2 75 mm 17.54.2.1 Sand cast iron S & S as per IS - 1729 17.54.2.2 Sand cast iron S & S as per IS- 3989 933 17.55 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter: 17.55.1 150mm 17.55.2 100 mm 17.55.3 75 mm 934 17.56 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 17.56.1 100 mm dia 17.56.2 75 mm dia 935 17.57 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 17.57.1 100 mm inlet and 100 mm outlet 17.57.1.1 Spun cast iron S & S as per IS: 3989. 17.57.1.2 Sand Cast iron S & S as per IS: 1729. 17.57.1.3 Hubless cast(spun) iron as per IS-15905 17.57.2 100 mm inlet and 75 mm outlet 17.57.2.1 Sand cast iron S & S as per IS - 3989 17.57.2.2 Spun Cast iron S & S as per IS- 1729. 17.57.2.3 Hubless cast(spun) iron as per IS- 15905 936 17.58 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 17.58.1 75 mm diameter 17.58.2 110 mm diameter 937 17.59 Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 17.59.1 Coupler 17.59.1.1 75 mm 17.59.1.2 110 mm 17.59.2 Single pushfit Coupler 17.59.2.1 75 mm 17.59.2.2 110 mm 17.59.3 Single tee with door 17.59.3.1 75x75x75 mm 17.59.3.2 110x110x110 mm 17.59.4 Single tee without door 17.59.4.1 75x75x75 mm 17.59.4.2 110x110x110 mm 17.59.5 Bend 87.50 17.59.5.1 75 mm bend 17.59.5.2 110 mm bend 938 17.60 Providing and fixing Unplasticised - PVC pipe clips of approved design to Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete. 17.60.1 75 mm 17.60.2 110 mm 939 17.61 Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet 940 17.62 Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, and washers of size 25x6mm, one bolts on each side of the pipe. 17.62.1 Total bracket length 580mm of approved shape and design (for single, 100mm dia pipe). 17.62.2 Total bracket length 810mm of approved shape and design (for two, 100mm dia pipes). 17.62.3 Total bracket length 1040mm of approved shape and design (for three, 100mm dia pipes). 941 17.63 Cutting chases in brick masonry walls (clay brick/flyash brick/AAC blocks) for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 sand :6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 sand) : 17.63.1 100 mm dia 17.63.2 75 mm dia 17.63.3 50 mm dia 942 17.64 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.64.1 Semi rigid pipe 17.64.1.1 32 mm dia 17.64.1.2 40 mm dia 17.64.2 Flexible pipe (only in residential & complaxes) 17.64.2.1 32 mm dia 17.64.2.2 40 mm dia 943 17.65 Providing and fixing 100 mm sand cast Iron grating for gully trap. 944 17.66 Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. 945 17.67 Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 946 17.68 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing 17.68.1 Circular shape 450mm dia. 17.68.2 Rectangular shape 453x357mm 17.68.3 Oval shape 450x350mm (outer dimensions) 17.68.4 Rectangular shape 1500x450 mm 947 17.69 Providing and fixing glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 948 17.70 Providing and fixing toilet paper holder: 17.70.1 C.P. brass 17.70.2 Vitreous china 949 17.71 Providing and fixing CP brass waste coupling of approved quality and make for sink and wash basin. 17.71.1 Waste coupling 31mm of 79mm length and 62mm breadth 17.71.2 Waste coupling 38mm of 83mm length and 77mm breadth 950 17.72 Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin. 951 17.73 Providing and fixing CP brass towel rail of approved quality and make 17.73.1 600x20mm 17.73.2 450x20mm 952 17.74 Providing and fixing CP brass towel ring of approved quality and make 200mm dia ring 953 17.75 Providing and fixing CP brass soap dish of approved quality and make 954 17.76 Providing and fixing CP brass Urinal spreader of approved quality and make 955 17.77 Providing and fixing C.P. brass soap container 109 mm wide, 125 high and 112 mm distance from wall of standard shape with bracket of the same material with all fittings etc. of approved quality and conforming to IS: specification. 956 17.78 Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification. 17.78.1 100 mm dia. 957 17.79 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. 17.79.1 Waste coupling 31mm dia of 79mm length and 62mm breadth weighing not less than 45gms. 17.79.2 Waste coupling 38mm dia of 83mm length and 77mm breadth, weighing not less than 60gms. 958 17.80 Providing and fixing PTMT Bottle Trap for Wash basin and sink. 17.80.1 Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. 17.80.2 Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263gms. 959 17.81 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. Weighing not less than 105 gms. 960 17.82 Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. 961 17.83 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 17.83.1 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 17.83.2 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. 962 17.84 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. 963 17.85 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. 964 17.86 Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. 965 17.87 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. 966 17.88 Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work. 967 17.89 Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. 968 17.90 Repainting C.I. cistern with synthetic enamel paint of approved colour brand and manufacture on the outside surface of cistern flush pipe, other fittings etc. complete. 969 17.91 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 17.91.1 75 mm diameter pipe 17.91.2 100 mm diameter pipe 17.91.3 150 mm diameter pipe 970 17.92 Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 17.92.1 75 mm diameter pipe 17.92.2 100 mm diameter pipe 17.92.3 150 mm diameter pipe 971 17.93 Repainting bath tub of size 1700x730x430mm with enamel paint. 972 17.94 Providing and laying Ceramic glazed half round pipe drain (having thickness 9 to 10mm) of approved make in colours such as White, Ivory, Grey, or any other colour, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 17.94.1 100 mm dia half round pipe 17.94.2 150 mm dia half round pipe 17.94.3 200mm dia half round pipe 973 17.99 Construction of manually operated fire based incinerator for girls-toilet i/c (i)   Fire and ash collection chamber 0.60x0.60 m, made of calcium silicate bricks, having 12mm dia steel bars grating @10 cm c/c, i/c MS mesh weldedon top including 300 mm x 450 mm MS openable door of half grill and half MS plate (3mm thick ).(ii)     0.40 m X 0.40 m duct made of 1.6 mm thick MS sheet for dropping napkins from the toilet opening.(iv) 150mm dia Class C heavy duty MS pipe conforming to IS 3589/1239 for gas emission with cowel, up to 2.10 meter height above terrace level.(v) Opening in wall having MS flap (1.6mm thick) of size 0.25X 0.25 m, finished with granite.etc complete as per standard drawing no. 5313-B-NB4-9919- R1 dated 21.02.2017 17.99.1 For ground floor buildings. 17.99.2 For Ground floor & Ist floor buildings. 17.99.3 Add extra for every additional floor above Ist floor. 974 17.95 Providing and fixing coupler for PVC pipes & fittings waste/rain water/drainage disposal of superior Indian make (as approved by Engineer incharge) i/c jointing with rubber rings, adhesive, lubricant,solvent cement PVC clips or burried underground i/c making necessary chases and holes in walls, floors or trenching complete with making good or i/c excavation and refilling as per site requirement with testing etc.complete. FOR WASH BASIN CONNECTION (40mm diameter) 975 18.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 18.6.1 Internal work - Exposed on wall 18.6.1.1 15 mm nominal outer dia Pipes. 18.6.1.2 20 mm nominal outer dia .Pipes. 18.6.1.3 25 mm nominal outer dia .Pipes. 18.6.1.4 32 mm nominal outer dia Pipes. 18.6.1.5 40 mm nominal outer dia Pipes. 18.6.1.6 50 mm nominal outer dia .Pipes. 18.6.2 Concealed work including cutting chases and making good the walls etc. 18.6.2.1 15 mm nominal outer dia .Pipes. 18.6.2.2 20 mm nominal outer dia .Pipes. 18.6.2.3 25 mm nominal outer dia Pipes. 18.6.2.4 32 mm nominal outer dia Pipes. 976 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work 18.7.1 15 mm nominal outer dia Pipes. 18.7.2 20 mm nominal outer dia .Pipes. 18.7.3 25 mm nominal outer dia Pipes. 18.7.4 32 mm nominal outer dia .Pipes. 18.7.5 40 mm nominal outer dia Pipes. 18.7.6 50 mm nominal outer dia .Pipes. 18.7.7 62.50 mm nominal inner dia Pipes. 18.7.8 75 mm nominal inner dia .Pipes. 18.7.9 100mm nominal inner dia .Pipes. 18.7.10 150 mm nominal inner dia Pipes. 977 18.8 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. 18.8.1 Internal work - Exposed on wall 18.8.1.1 15 mm dia. nominal bore 18.8.1.2 20 mm dia. nominal bore 18.8.1.3 25 mm dia. nominal bore 18.8.1.4 32 mm dia. nominal bore 18.8.1.5 40 mm dia. nominal bore 18.8.1.6 50 mm dia. nominal bore 18.8.2 Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall. 18.8.2.1 15 mm dia nominal bore 18.8.2.2 20 mm dia nominal bore 18.8.3 External work : including trenching and refilling etc. 18.8.3.1 15 mm dia. nominal bore 18.8.3.2 20 mm dia. nominal bore 18.8.3.3 25 mm dia. nominal bore 18.8.3.4 32 mm dia. nominal bore 18.8.3.5 40 mm dia. nominal bore 18.8.3.6 50 mm dia. nominal bore 18.8.3.7 65 mm dia. nominal bore 18.8.3.8 80 mm dia. nominal bore 978 18.9 Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) 18.9.1 Internal work - Exposed on wall 18.9.1.1 15.88 mm outer diapipe 18.9. 1.2 22.22 mm outer diapipe 18.9.1.3 28.58 mm outer diapipe 18.9.1.4 34.00 mm outer dia Pipe 18.9.1.5 42.70 mm outer dia Pipe 18.9.1.6 48.60 mm outer dia Pipe 18.9.2 Internal work - Concealed Pipe 18.9.2.1 15.88 mm outer dia .Pipes. 18.9.2.2 22.22 mm Outer diaPipes 979 18.12 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.12.1 With C.I. wheel of approved quality (screwed end) 18.12.1.1 25 mm nominal bore 18.12.1.2 32 mm nominal bore. 18.12.1.3 40 mm nominal bore 18.12.1.4 50 mm nominal bore 18.12.1.5 65 mm nominal bore 18.12.1.6 80 mm nominal bore 18.12.2 With brass lever handle of approved quality. 18.12.2.1 25 mm nominal bore 18.12.2.2 32 mm nominal bore. 18.12.2.3 40 mm nominal bore 18.12.2.4 50 mm nominal bore 980 18.13 Providing and fixing CPVC gate valve with knob of approved quality. 18.13.1 25 mm nominal bore 18.13.2 32 mm nominal bore. 18.13.3 40 mm nominal bore 18.13.4 50 mm nominal bore 981 18.14 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 18.14.1 15 mm nominal bore 18.14.2 20 mm nominal bore 18.14 3 25 mm nominal bore 982 18.15 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 18.15.1 25 mm nominal bore 18.15.1.1 Horizontal 18.15.1.2 Vertical 18.15.2 32 mm nominal bore 18.15.2.1 Horizontal 18.15.2.2 Vertical 18.15.3 40 mm nominal bore 18.15.3.1 Horizontal 18.15.3.2 Vertical 18.15.4 50 mm nominal bore 18.15.4.1 Horizontal 18.15.4.2 Vertical 18.15.5 65 mm nominal bore 18.15.5.1 Horizontal 18.15.5.2 Vertical 18.15.6 80 mm nominal bore 18.15.6.1 Horizontal 18.15.6.2 Vertical 983 18.16 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 18.16.1 15 mm nominal bore 18.16.2 20 mm nominal bore 18.16.3 25 mm nominal bore 984 18.17 Providing and fixing uplasticised PVC connection pipe with brass unions : 18.17.1 30 cm length 18.17.1.1 15 mm nominal bore 18.17.1.2 20 mm nominal bore 18.17.2 45 cm length 18.17.2.1 15 mm nominal bore 18.17.2.2 20 mm nominal bore 985 18.18 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :- 18.18.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. 18.18.2 With well burnt flyash bricks of 50 kg/sqm compressive strength. 986 18.19 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design 18.19.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. 18.19.2 With flyash bricks of 50 kg/cm2 strength 987 18.20 Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.20.1 With common burnt clay bricks of 25 kg/cm2 compressive strength. 18.20.2 With flyash bricks of 50kg/cm2 strength. 988 18.21 Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.21.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. 18.21.2 With flyash bricks of 50kg/sqm compressive strength. 989 18.22 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 18.22.1 15 mm diameter pipe. 18.22.2 20 mm diameter pipe. 18.22.3 25 mm diameter pipe. 18.22.4 32 mm diameter pipe. 18.22.5 40 mm diameter pipe. 18.22.6 50 mm diameter pipe. 990 18.23 Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 18.23.1 15 mm diameter pipe. 18.23.2 20 mm diameter pipe. 18.23.3 25 mm diameter pipe 18.23.4 32 mm diameter pipe 18.23.5 40 mm diameter pipe 18.23.6 50 mm diameter pipe 991 18.24 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 18.24.1 15 mm diameter pipe 18.24.2 20 mm diameter pipe 18.24.3 25 mm diameter pipe 18.24.4 32 mm diameter pipe 18.24.5 40 mm diameter pipe 18.24.6 50 mm diameter pipe 18.24.7 65 mm diameter pipe 18.24.8 80 mm diameter pipe 992 18.25 Providing and filling sand all-round the G.I. pipes in external work. 18.25.1 15 mm diameter pipe 18.25.2 20 mm diameter pipe 18.25.3 25 mm diameter pipe 18.25.4 32 mm diameter pipe 18.25.5 40 mm diameter pipe 18.25.6 50 mm diameter pipe 18.25.7 65 mm diameter pipe 18.25.8 80 mm diameter pipe 993 18.26 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 18.26.1 15 mm nominal bore 18.26.2 20 mm nominal bore 18.26.3 25 mm nominal bore 18.26.4 32 mm nominal bore 18.26.5 40 mm nominal bore 18.26.6 50mm nominal bore 18.26.7 65mm nominal bore 18.26.8 80 mm nominal bore 994 18.27 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 18.27.1 15 mm nominal bore. 18.27.2 20 mm nominal bore. 18.27.3 25 mm nominal bore. 18.27.4 32 mm nominal bore. 18.27.5 40 mm nominal bore. 18.27.6 50 mm nominal bore. 18.27.7 65 mm nominal bore. 18.27.8 80 mm nominal bore. 995 18.28 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 996 18.29 Providing and fixing brass bib cock of approved quality 18.29.1 15 mm nominal bore 18.29.2 20 mm nominal bore 997 18.30 Providing and fixing brass stop cock of approved quality : 18.30.1 15 mm nominal bore 18.30.2 20 mm nominal bore 998 18.31 Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, and weighing not less then 400 kg, 15 mm nominal bore. 999 18.32 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore. 1000 18.33 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore 1001 18.34 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. 1002 18.35 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore 1003 18.36 Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore. 1004 18.37 Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. nd weighing not less than 650 gm,a15 mm nominal bore 125 mm long foam flow. 1005 18.38 Providing and fixing C.P. brass basin mixer of approved quality and make conforming to IS: specification.15 mm nominal bore. 1006 18.39 Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1007 18.40 Providing and fixing C.P. brass sink mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1008 18.41 Providing and fixing C.P. brass elbow operated bibcock of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1009 18.42 Providing and fixing C.P. brass elbow operated pillar cock of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1010 18.43 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 18.43.1 100 mm diameter 18.43.2 150 mm diameter 18.43.3 200 mm diameter 1011 18.44 Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore. 18.44.1 86 mm long weighing not less than 88 gm 18.44.2 122 mm long weighing not less than 99 gm 18.44.3 165mm long weighing not less than 110 gm 18.44.4 90mm long weighing not less than 93 gm 1012 18.45 Providing and fixing PTMT stop cock of approved quality and colour. 18.45.1 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 18.45.2 20mm nominal bore, 89mm long. Weighing not less than 88 gms. 18.45.3 Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. 1013 18.46 Providing and fixing PTMT pillar cock of approved quality and colour. 18.46.1 15mm nominal bore, 107mm long. Weighing not less than 110 gms. 18.46.2 15mm nominal bore, 125mm long foam flow weighing not less than 120 gms. 1014 18.47 Providing and fixing PTMT, push cock of approved quality and colour. 18.47.1 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 18.47.2 15 mm nominal bore, 80mm long weighing not less than 46 gms. 1015 18.48 Providing and fixing PTMT grating of approved quality and colour. 18.48.1 Circular type. 18.48.1.1 100 mm nominal dia. 18.48.1.2 125 mm nominal dia with 25 mm waste hole. 18.48.2 Rectangular type with openable circular lid. 18.48.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating. 1016 18.49 Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. 1017 18.50 Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms. 1018 18.51 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 18.51.1 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 18.51.2 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 18.51.3 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. 18.51.4 40mm nominal bore, 206mm long. Weighing not less than 690 gms. 18.51.5 50mm nominal bore, 242mm long. Weighing not less than 1240 gms. 1019 18.52 Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour 15 mm nominal bore 18.52.1 30cm length. 18.52.2 45 cm length. 1020 18.53 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 18.53.1 15 mm nominal bore.Weighing not less than 32 gms. 18.53.2 20mm nominal bore.Weighing not less than 40gms. 18.53.3 25mm nominal bore.Weighing not less than 62 gms. 1021 18.54 Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 18.54.1 80 mm nominal bore 18.54.2 100 mm nominal bore 18.54.3 150 mm nominal bore 18.54.4 200 mm nominal bore 1022 18.55 Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 18.55.1 80 mm nominal bore 18.55.2 100 mm nominal bore 18.55.3 150 mm nominal bore 18.55.4 200 mm nominal bore 1023 18.56 Cutting holes upto 30x30 cm in walls including making good the same : With common burnt clay bricks of 25 kg /sqcmor flyash bricks of 50 kg/cm2compressive strength. 1024 18.57 Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. 1025 18.58 Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. 1026 18.59 Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba. 1027 18.60 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 18.60.1 25 to 40 mm nominal bore 18.60.2 50 to 80 mm nominal bore 1028 18.61 Providing and fixing CP jet assembly to including connection etc complete. 1029 18.62 Providing and fixing ferro- cement water storage tank with cover, having minimum thickness of 10mm. The wall to be reinforced with two layers of double galvanized annealed square wooven wire mesh of 20 gauge wire spaced at 15mm for 300 litre capacity and 12mm for 450 to 2500 litres capacity finish with 3 layers of Cement mortar 1:2 duly modified with polymer based plastizers and hardening chemicals (Burogrout and Buroseal) The tank should conform to the specification prescribed by Structural Engineering Research Centre Roorkee/Gaziabad. The tanks to be painted with drinking water paint inside and aluminimum paint out side with provision of outlet, inlet, overflow and cleaning including hoisting and placing in position upto floor two level or 5 M. height. 1030 18.63 Add extra for additional floor lift beyond 5.0M.height. 1031 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 19.1.1 100 mm diameter 19.1.2 150 mm diameter 19.1.3 200 mm diameter 19.1.4 230 mm diameter 19.1.5 250 mm diameter 19.1.6 300 mm diameter 1032 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 19.2.1 100 mm diameter S.W. pipe 19.2.2 150 mm diameter S.W. pipe 19.2.3 200 mm diameter S.W. pipe 19.2.4 230 mm diameter S.W. pipe 19.2.5 250 mm diameter S.W. pipe 19.2.6 300 mm diameter S.W. pipe 1033 19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design : 19.3.1 100 mm diameter S.W. pipe 19.3.2 150 mm diameter S.W. pipe 19.3.3 200 mm diameter S.W. pipe 19.3.4 230 mm diameter S.W. pipe 19.3.5 250 mm diameter S.W. pipe 19.3.6 300 mm diameter S.W. pipe 1034 19.4 Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 19.4.1 110 mm diameter OD (min. wall thickness 3.2mm) 19.4.2 160 mm diameter OD (min. wall thickness 4.0mm) 19.4.3 200 mm diameter OD (min. wall thickness 4.9mm) 19.4.4 250 mm diameter OD (min. wall thickness 6.2mm) 19.4.5 300 mm diameter OD (min. wall thickness 7.7mm) 1035 19.5 Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design: 19.5.1 110 mm diameter PVC. pipe 19.5.2 160 mm diameter PVC. pipe 19.5.3 200 mm diameter PVC. pipe 19.5.4 250 mm diameter PVC. pipe 19.5.5 300 mm diameter PVC pipe 1036 19.6 Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of PVC. pipes including bed concrete as per standard design : 19.6.1 110 mm diameter PVC. pipe 19.6.2 160 mm diameter PVC. pipe 19.6.3 200 mm diameter PVC. pipe 19.6.4 250 mm diameter PVC. Pipe 19.6.5 300 mm diameter PVC pipe 1037 19.7 Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 19.7.1 100x100 mm size P type 19.7.1.1 With well burnt bricks 19.7.1.2 With Sewer bricks conforming to IS : 4885 19.7.2 150 x 100 mm size P type. 19.7.2.1 With well burnt bricks 19.7.2.2 With sewer bricks conforming to IS : 4885 19.7.3 180x150 mm size P type 19.7.3.1 With well burnt bricks 19.7.3.2 With Sewer bricks conforming to IS : 4885 1038 19.8 Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : 19.8.1 100 mm dia. R.C.C. pipe 19.8.2 150 mm dia. R.C.C. pipe 19.8.3 250 mm dia. R.C.C. pipe 19.8.4 300 mm dia. R.C.C. pipe 19.8.5 450 mm dia. R.C.C. pipe 19.8.6 500 mm dia. R.C.C. pipe 19.8.7 600 mm dia. R.C.C. pipe 1039 19.9 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design 19.9.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.9.1.1 With well burnt bricks 19.9.1.2 With Sewer bricks conforming to IS : 4885 19.9.2 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : 19.9.2.1 With well burnt bricks 19.9.2.2 With Sewer bricks conforming to IS : 4885 19.9.3 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : 19.9.3.1 With well burnt bricks 19.9.3.2 With Sewer bricks conforming to IS : 4885 1040 19.10 Extra for depth for manholes 19.10.1 Size 90x80 cm 19.10.1.1 With well burnt bricks 19.10.1.2 With Sewer bricks conforming to IS : 4885 19.10.2 Size 120x90 cm 19.10.2.1 With well burnt bricks 19.10.2.2 With Sewer bricks conforming to IS : 4885 1041 19.11 Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : 19.11.1 With well burnt bricks 19.11.2 With Sewer bricks conforming to IS : 4885 1042 19.12 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m 19.12.1 With well burnt bricks 19.12.2 With Sewer bricks conforming IS : 4885 1043 19.13 Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) 19.13.1 With well burnt bricks 19.13.2 With Sewer bricks conforming IS : 4885 1044 19.14 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : 19.14.1 With well burnt bricks 19.14.2 With Sewer bricks conforming IS : 4885 1045 19.15 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 19.15.1 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : 19.15.1.1 With well burnt bricks 19.15.1.2 With Sewer bricks conforming IS : 4885 1046 19.16 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : 19.16.1 With well burnt bricks 19.16.2 With Sewer bricks conforming IS : 4885 1047 19.17 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : 19.17.1 With 20x20 mm square bar 19.17.2 With 20 mm diameter round bar 1048 19.18 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. 1049 19.19 Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size): 19.19.1 With 20x20 mm square bar 19.19.2 With 20 mm diameter round bar 1050 19.20 Supplying and fixing C.I. cover without frame for manholes : 19.20.1 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. 19.20.2 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 19.20.3 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. 1051 19.21 Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality 19.21.1 Light duty D- 2.5 19.21.1.1 Rectangular shape 600x450mm internal dimensions 19.21.1.2 Square shape 450mm internal dimensions 19.21.1.3 Circular shape 450mm internal diameter 19.21.2 Medium duty - 10 19.21.2.1 Square shape 450mm internal dimension 19.21.2.2 Circular shape 500mm internal diameter 19.21.3 Heavy duty D - 20 19.21.3.1 Circular shape 560 mm internal diameter 19.21.4 Extra Heavy Duty - 35 19.21.4.1 Circular shape 560 mm internal dia. 1052 19.22 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. 1053 19.23 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 19.23.1 For pipes 100 to 230 mm diameter 19.23.2 For pipes 250 to 300 mm diameter 19.23.3 For pipes 350 to 450 mm diameter 1054 19.24 Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) with cement mortar 1:1 (1 cement : 1 sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 19.24.1 100 mm dia. sand cast iron drop connection 19.24.2 150 mm dia. sand cast iron drop connection 1055 19.25 Extra for depths beyond 60 cm of sand cast iron drop connection complete : 19.25.1 For 100 mm dia. sand cast iron drop connection 19.25.2 For 150 mm dia. sand cast iron drop connection 1056 19.26 Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Brick work for Raising depth of manhole to be paid separately) : 19.26.1 Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 19.26.2 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 19.26.3 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 19.26.4 Circular manhole 140 cm dia with circular cover 600 mm dia of grade Extra heavy duty HD -35 1057 19.27 Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : 19.27.1 With well burnt bricks 19.27.2 With fly ash bricks 100 key/cm2 strangth 1058 19.28 Constructing brick masonry road gully chamber 45x45x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) with precast R.C.C. vertical grating complete as per standard design : 19.28.1 With well burnt bricks 19.28.2 With fly ash bricks 100 kg/cm2 strength 1059 19.29 Constructing brick masonry road gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : 19.29.1 With well burnt bricks 19.29.2 With fly ash bricks 100 kg/cm2 strength 1060 19.30 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.30.1 With well burnt bricks 1061 19.31 Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. 1062 19.32 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 19.32.1 100 mm dia 19.32.2 150 mm dia 1063 19.33 Providing, laying and jointing half round glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 19.33.1 100 mm dia 19.33.2 150 mm dia 19.33.3 200 mm dia 19.33.4 230 mm dia 19.33.5 250 mm dia 19.33.6 300 mm dia 1064 19.34 Providing and laying half round RCC pipes class (light duty) with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : Excavation to be paid seperataly 19.34.1 100 mm dia. Half round R.C.C. pipe 19.34.2 150 mm dia. Half round R.C.C. pipe 19.34.3 250 mm dia. Half round R.C.C. pipe 19.34.4 300 mm dia. Half round R.C.C. pipe 1065 19.35.1 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.1.1 & 19.9.1.2 19.35.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.2.1 & 19.9.2.2 19.35.3 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.3.1 & 19.9.3.2 1066 19.36 Providing & Fixing of Precast RCC drain cover of size 600x 450 x70mm (thickness) with 4 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. 1067 19.37 Providing & Fixing of Precast RCC drain cover of size 750x600 x70mm (thickness) with 6 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. 1068 19.38 Providing & Fixing of Precast RCC drain cover of size 900x450 x90mm (thickness) with 8 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @ top face will have broom finish etc complete. 1069 19.39 Providing & Fixing of Precast RCC drain cover of size 1150x400 x100mm (thickness) with 10 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. 1070 19.40 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 900X450mm rectangular having weight of (complete unit) (weight of frame 11.7 kg + weight of cover 43.76kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. 1071 19.41 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 450X600mm rectangular having weight of (complete unit) (weight of frame 1.84kg + weight of cover 14.2kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. 1072 19.42 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 300X300mm (square) having weight of (complete unit) (weight of frame 1.12kg + weight of cover 4.1kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. 1073 19.43 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 600mm (round) having weight of (complete unit) (weight of frame 13.6kg + weight of cover 43.1kg + - 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5 mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement 1074 19.44 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 500mm (round) having weight of (complete unit) (weight of frame 11.2kg + weight of cover 41.78kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement 1075 19.45 Deduct for not providing and installing FRP/GRP manhole cover size 19.45.1 900mmx450mm (weight of cover 43.76kg ± 10%) 19.45.2 450mmx600mm (weight of cover 14.2kg ± 10%) 19.45.3 300mmx300mm (weight of cover 4.1kg ± 10%) 19.45.4 600mm (weight of cover 41.78kg ± 10%) 19.45.5 500mm (weight of cover 43.1kg ± 10%) 1076 19.46 Providind, laying and jointing HDPE Double Wall corrugated (DWC) pipes (excavation to be paid seperately) 19.46.1 100 mm dia to 110 mm dia 19.46.2 150 mm dia to 160 mm dia 19.46.3 200 mm dia 19.46.4 250 mm dia 19.46.5 300 mm dia 1077 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion. 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) 21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) 21.1.2 For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). 21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) 21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) 21.1.3 Deduct for not providing EDPM rubber/neoprene gasket all around. 1078 21.2 Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. 21.2.2 Pre-laminated particle board with decorative lamination on both sides. 1079 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) 21.3.2 With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). 1080 21.4 Add extra for providing and fixing froasted glass instead of float glass 21.4.1 With glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) 21.4.2 With glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 21.4.3 With glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). 1081 21.5 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : 21.5.1 With stainless steel cover plate - minimum 1.25 mm thickness 21.5.2 With brass cover plate - minimum 1.25 mm thickness. 1082 21.6 Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). 1083 21.7 Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge. 1084 21.8 Providing and fixing machine moulded aluminium covering of approved pattern and design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick and 15 mm dia, at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-Charge : 21.8.1 Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 21.8.2 Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) 1085 21.9 Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width 1086 21.10 Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. For fixed portion & for shutters of doors, windows and ventilators 1087 21.11 Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete. 1088 21.12 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick and length as required with SS screws etc complete as per direction of Engineer-in-Charge. 21.12.1 Anodized (AC 15 ) aluminium tubular handle bar 21.12.2 Powder coated minimum thickness 50 micron aluminium tubular handle bar. 21.12.3 Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar. 1089 21.13 Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 1090 21.14 Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). 1091 21.15 Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. 21.15.1 Anodized (AC15) aluminium 21.15.2 Powder coated minimum thickness 50 micron aluminium. 21.15.3 Polyester powder coated minimum thickness 50 micron aluminium. 1092 21.16 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-Charge 21.16.1 Anodized (AC15 ) aluminium 21.16.2 Powder coated minimum thickness 50 micron aluminium 21.16.3 Polyester powder coated minimum thickness 50 micron aluminium. 1093 21.17 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. (Only weight of grill to be measured for payment). 1094 21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately). 1095 21.19 Providing and fixing 50 micron thick reflective one way type heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. 1096 21.20 Providing and fixing 50 micron thick Frosted heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. 1097 21.21 Providing and fixing 25 micron thick Non reflective heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in- charge of approved brand and make. 1098 21.22 Providing and fixing 12 mm thick toughened glass including all connectors and fixing accessories all complete for partitions, cubicals etc. As per direction of Engineer-in-Charge. 1099 21.24 Extra for froasted glass (with eching film) in item No. 21.22 1100 22.1 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge consisting of: (i)     Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound conforming to IS: 2645 in the recommended proportion over the levelling course ( levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii)         2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportions. (iii)        Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. (with 5 years service guarantee) Using rough Kota stone. 1101 22.2 Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge (with 5 years service guarantee) Using rough Kota stone. 1102 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : a)   Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. b)   IInd course of 20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. c)    IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. d)      IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) (with 5 years service guarantee) 1103 22.4 Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete (with 5 years service guarantee) 22.4.1 Serrated with central bulb (225mm wide, 8- 11mm thick). 22.4.2 Dumb bell with central bulb (180mm wide, 8mm thick). 22.4.3 Kickers (320mm wide, 5mm thick). 1104 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a)  First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)  Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 1105 22.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a)     After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b)    Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c)   Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. 1106 22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a)  Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b)  Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in- Charge: (with 5 years service guarantee) With average thickness of 120mm and minimum thickness at khurra as 65 mm. 1107 22.8 Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea-sized gravel spread at 6 cubic decimeter per square metre including preparation of surface but excluding grading complete with : (with five years service gurantee). Bitumen felt (hessian base) type 3 grade I conforming to IS: 1322. 1108 22.9 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee). 1109 22.10 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, complete. (With five years service gurantee). 1110 22.11 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or/ and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee) 1111 22.12 Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm down size or pea sized gravel at 6 cudm per sqm. 1112 22.13 Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. 1113 22.14 Grading roof for receiving water proofing treatment with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) 22.14.2 Cement mortar 1:3 (1 cement : 3 sand) 22.14.3 Cement mortar 1:4 (1cement : 4 sand) 1114 22.15 Providing and laying insitu six course water proofing treatment with APP (Atactic poly- propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm,conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. (with 5 years service guarantee) 1115 22.16 Providing and laying in situ four course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with 5 years service guarantee). 1116 22.17 Providing and laying in situ six course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with five years service gurantee). 1117 22.18 Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2mm thick water proofing membrane for corrugated roof sheets, black finished reinforced with glass fibre matt consisting in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. (With five years service gurantee). 1118 22.19 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer of the membrane shall be as under:Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : (with 5 years service guarantee) 1119 22.20 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: (with 5 years service guarantee). 1120 22.21 Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. [for item No. 22.18 to 22.20] 1121 22.22 Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of (i)   Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii)     Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80% chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2nd coat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per manufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area. (iv) The treated area should be cure with water for 48 hrs. by flooding the surface. (v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee) 1122 22.23 Providing water proofing treatment over Roof, Wall, Chhajjas, Balcony with Rubberized elastomeric cold applied liquid waterproofing membrane blend of special resin and rubber with more than 1300% elongation (confirming ASTM-D2370-98), at leakage/seepage area consisting of the following operation. (i)Removal of damaged waterproofing treatment if any like bituminous membrane / plaster/ brick bat koba/screeding etc. (ii) Surface preparation: Roughening of surface by scrubbing with steel wire/ Nylon brush/ Removing all dust particles and washing with adequate water to clean completely, opening of cracks in V groove in size of 5mm x 10m (WxD), filling of cracks with elastomeric creak filler/PU sealent repair of potholes and holor making on roof surface by polymer mortar with adding SBR bonding agent. (iii) Providing and applying 1st coating of rubberized elastomeric liquid membrane as primer (ratio 1:2 1 part liquid membrane and 2 part water) by brush/ Roller/ Spray having minimum thickness of 70-80 micron. Allow the coating to set in natural air for minimum 2 hrs, then put reinforcement by laying 45gsm fibre glass mesh and applying 2nd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 20% water) with minimum thickness 100-120 micron. Allow the coating to set in natural air for minimum 12 hrs. (iv) Providing and applying 3rd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 10% water). Total DFT (Dry film thickness) thickness after 3rd coat must be 280-300 micron and consumption in three coats @ 6.5kg for 10sqm. (v) Providing and applying 4th and 5th coat of High quality waterproof membrane in white colour, single component special synthetic resin based flexible thixotropic white color coating with excellent UV resistance (SRI - 144) with more than 300% elongation (confirming ASTM D 412-98) in ratio: 1 part membrane and 10% water thickness of 200 micron DFT in two coats, with average consumption @ 5kg per 10 sqm. After application of fourth coat let it air dry for minimum 3 hrs before application of fifth coat. (vi) The treated area must be tested for water leakage/seepage by flooding with water for 48 hrs (vii) Application of membrane coating shall be got done by authorized applicator of manufacturer. (viii) 5 years of service guarantee to be provided.All above operations to be done in order as per direction on Engineer-in-Charge. 1123 22.24 Supplying and applying fibre reinforced, UV resistant elastomeric liquid applied waterproofing & Heat reflective coating coating with PU Hybrid polymers & acrylic fibers. The coating shall resist 10 bars of water pressure as per DIN 1048 standards, with elongation of 350% as per ASTM D412 & crack bridging of upto 2.5mm conforming to ASNZ standard. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and as per the direction of Engineer-in-Charge. 1124 22.25 Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and as per direction of Engineer-in-Charge. 1125 22.26 Providing and applying UV Stable polyurethane liquid water proofing membrane having Sun Reflectivity Index (SRI) of 106 on top of concrete roof / Retainning wall / Old layer of bituminous surfaces / Polyurethane foam and metal surfaces in three or more coats @20kg/ 10 sqm consisting of a coat of two component epoxy primer in ratio of 1:3(one part of resin and 3 parts of hardner) at a consumption of 2kg/10sqm. the vital physical and chemical parameters shall be as under : Min Elongation at break of 600% as per ASTM D412 and tensile strength of 3.0 N/mm2 as per ASTM D412. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and direction of Engineer-in-Charge. 1126 22.27 Supplying & installing waterproofing treatment by using 1.2 mm thick HDPE membrane before casting of the base RCC slab. The pre-applied membrane gets bonded to the underneath of the poured concrete used as base slab. The membrane shall consist of a thick HDPE film, a highly aggressive pressure sensitive adhesive and weather resisting coating which bonds integrally to poured concrete of base slab. The membrane shall conforms to basement waterproofing protection to grades 2, 3 & 4 as defined in BS 8102:2009. The waterproofing membrane shall have following minimum properties: a)    Resist hydrostatic pressure of up to 70 m head of water as per ASTM D5385; b)      Puncture Resistance of 950 N (as per ASTM E154) c)      Elongation of >400 % (as per ASTM D412) d)    Peel Strength of concrete: >1500 N/m (as per ASTM D903) e)      Tensile strength of 28.2 MPA (as per ASTM D412). 1127 22.28 Providing and applying 2.0 mm thick twin colour flexible PVC waterproofing membrane. Flexibility under low temperatures as per EN 495-5 should be < - 20degC. On all horizontal surfaces Geotextile 300 Gsm to be laid over PCC, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane provide 300 Gsm Geotextile Then protection screed of suitable thickness. On all vertical surfaces Geotextile 300 Gsm to be laid along with Vertical wall, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane providing protection layer of Drain Board HDPE Dimple sheet before back filling of soil. 1128 22.29 Providing and applying waterproofing & Heat reflecting roof coating with 100% acrylic elastomeric polymers. Contains 30% Volume solid, tensile strength 8 kg/cm², crack bridging, VOC 30 ± 5 gm/ltr upto 2 mm. then applying two coats with forced coverage of 20 sqft/ltr/two coats. The operation shall be carried out after scrapping & propely clening the surface to remove loose particles with wire brush/Jet washer. Apply 1 coat @1 ltr/10 sqm & 3 undiluted coats @ 8 ltr/10 sqm with 4 hrs interval of each coat.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. 1129 22.30 Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush. Apply 2nd coat with filling of crack fill paste when the surface is tacky but not dried completely with putty knife & spatula.After 4 hours of application 2nd coat apply 3rd coat of Crack fill paste. The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer-in-Charge 1130 22.31 Providing & applying single pack component, solvent-free, cold applied, Polyurethane modified, elastomeric liquid applied waterproofing membrane- PU coat with excellent UV resistant capacity, The material shall meet the requirement as specified in ASTM D2370-98 of elongation at break of film>350% with geotextile fleece =50% approx.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. The product performance shall carry guaranteed for 5 year against any leakage. 22.31.1 For Horizontal surface (with Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 22.31.2 For Horizontal surface (without Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 1131 22.32 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and Compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-Charge. The product performance shall carry guarantee for 10 years against any leakage. 1132 22.33 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on positive side. The crystalline slurry shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. 22.33.1 For vertical surface two coats @ 0.70 kg per sqm 22.33.2 For horizontal surface one coat @1.10 kg per sqm. 1133 22.34 Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. crystalline dryshake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product Performance shall carry guarantee for 10 years against any leakage. 1134 22.35 Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge.The product performance shall carry guarantee for 10 years against any leakage. 22.35.1 For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. 22.35.2 For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @ 0.070 kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline mortar @ 0.040 kg per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040 kg to fill the hole) 1135 22.36 Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. 1136 22.37 Providing and applying waterproofing treatment in bathroom or tiled balcony area without breaking or removing tiles, by using waterproofing sheets as per manufacturers data sheet instructions. Permitting use of bathroom/balcony after 24 hours of application of treatement, Complete with materials and labour and gurantee of leakage for a period of 5 year. 1137 23.11 Providing and fixing 2 mm thick homogeneous conductive PVC (Poly Vinyl Flooring) EN (European Standard), total weight is 3250 g/m2, approx. PUR (Polyurethane Reinforced ), abrasion group P: ≤2.00 mm, residual indentation approx. 0.03 mm, anti-bacterial and fungal resistance, castor wheel test qualified, dimensional Phthalate free, directional in design.The floor finish should be termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto 100mm.Recommended to use in area like ICU , Post operative, Recovery rooms, OPD, Patient rooms, Corridors ,passages etc. 1138 23.12 Providing and fixing permanently static dissipative pressed homogeneous conductive PVC ( Poly Vinyl Flooring) EN (European Standard), anti static, wear layer thickness is 2mm (EN429), vinyl flooring having carbon backing with total weight 3000 g/m2 ESD approved, restorable properties, available in rolls. 100% recyclable (eco - freindly). Low VOC emission after 28days of installation (lower than ≤100μg/m3), Phthalate free non-directional in Design. Recommended to use in area like Operation theater, ICU, Server room, etc. 1139 23.13 Providing and fixing 0.92mm thick hetrogeneous compact PVC (Poly Vinyl Wall Covering) for Interior wall area, with wear layer thickness 0.12mm of PVC, EN(European Standard) total weight is 1500 g/m2, approx PUR (Polyurethane Reinforced), good resistance to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28 days of installation (lower than ≤10μg/m3), phthalate free, directional in design, The wall finish should termite free at the room perimeter. Recommended to use in area like OT,ICU, Corridors, Patient Room etc. 1140 23.14 Providing and fixing 1.3mm thick homogeneous PVC (Poly Vinyl Wall Covering) for interior area with wear layer thickness 1.3 mm of PVC, EN (European Standard) total weight is 2100 g/m2,approx. PUR (Polyurethane Reinforced), good resistant to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28days of installation (lower than ≤10μg/m3), phthalate free, directional in design.The wall finish should termite free at the room. Recommended to use in area like OT.ICU,Corridors, Passages , Patient Room Etc 1141 23.15 Supply and installation of 2mm thick homogeneous vinyl flooring, Highest abrasion wear rating Group T (EN660), binder content exceeds 55% of the flooring composition, no waste technology, consisting of PVC resin, plasticizers and stabilizers, type I. flooring ( (EN ISO 23997) max 0.4%, Abrasion group (MSZ EN 660-1) T, Fire resistance EN 13501-1 BF1-s1, Slip resistance DIN 51130 R9, EN 13893 DS, electrical resistance EN 1815 <2 kv, Chemical resistance EN ISO 26987, Castor chair resistance EN ISO 4918, Hygenie Bacterial resistant, Seaming method - hot welding, finishing complete . Recommended to use in area like Operation theater, ICU, Server room, etc. 1142 24.8 Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self- drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. 1143 24.9 Providing and fixing thermal insulation with Resin Bonded glass wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by crisscrossing GI wire etc. complete as per directions of Engineer-in-Charge. 24.9.1 Providing and fixing insulation with resin bonded Glass wool 24.9.2 Providing and fixing insulation with resin bonded Rock wool 1144 24.11 Providing and fixing precoatedgalvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsmlength upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1145 24.12 Providing and fixing precoatedgalvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws complete : 24.12.1 Ridges plain (500 - 600mm). 24.12.2 Flashings/ Aprons.( Upto 600 mm) 24.12.3 North light curves. 24.12.4 Barge board (Upto 300 mm). 24.12.5 Crimp curve 24.12.6 Gutter. (600 mm over all girth). 1146 25.1 Providing and fixing white vitreous china Anti germ Fluoro-Polymer Coated Water closet squatting pan with 100 mm sand cast Iron P and S- trap, and 7.2 liter Low level, dual flush, PP (Poly Propylene) made open slim wall hung cistern capacity 3 liter/6 liter flushing, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. 25.1.1 White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440x575x250 mm With integral foot rests. (Premium Range) 25.1.2 White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410x515x255 mm with integral foot rests. (Premium Range) 1147 25.2 Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. 25.2.1 Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) 25.2.2 Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) 1148 25.3 Providing and fixing white vitreous china European Wall hung Anti germ Fluoro-Polymer Coated water closet of approved shape with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propylene) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. 25.3.1 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380x520x375 mm with solid poly propelyne made soft closing seat cover (Premium Range) 25.3.2 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390x570x365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) 25.3.3 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500x360 mm with solid poly propelyne made, soft closing seat cover (Premium Range) 25.3.4 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360x500x330 mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) 1149 25.4 Providing and fixing white vitreous china Anti germ fluoro-polymer coated couple water closet flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete . 25.4.1 Anti germ Fluoro-Polymer Coated couple water closet Size 420x710x810 mm with solid poly propelyne made soft closing seat cover. (Premium Range) 25.4.2 Anti germ Fluoro-Polymer Coated couple water closet Size 380x610x805 mm with solid poly propelyne made soft closing seat cover. (Premium Range) 25.4.3 Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) 25.4.4 Anti germ Fluoro-Polymer Coated couple water closet Size 375 x 650 x 800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) 1150 25.5 Providing and fixing white vitreous china Anti germ fluoro-polymer coated single piece W.C. dual flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. 25.5.1 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370x695x795 mm with solid poly propelyne made soft closing seat cover.(Premium Range) 25.5.2 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 395x710x730 mm with solid poly propelyne made soft closing seat cover.(Premium Range) 25.5.3 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 385 x 720 x 710mm with solid poly propelyne made soft closing seat cover.(Premium Range) 25.5.4 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 x 640 x 685 mm with solid poly propelyne made soft closing seat cover.(Premium Range) 1151 25.6 Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet along with dual flushing cistern flushing capacity 3 & 6 litre approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. 25.6.1 Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 760X360X635mm with solid poly propelyne made soft closing seat cover (Premium Range) 25.6.2 Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 380x650x730 mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) 1152 25.7 Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with C.I. Brackets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. 25.7.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) 1153 25.8 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology), 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. 25.8.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 570x820x195 mm with wall mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) 25.8.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x820x195 mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology). (Premium Range) 1154 25.9 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted single lever concealed basin mixture, (cartridge size 32 mm) 32 mm C. P. brass waste coupling length 130mm and 32 mm C. P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) 25.9.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) 25.9.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185 mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) 1155 25.10 Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with 15 mm Table mounted single lever Tall boy basin mixture, (cartridge size 32 mm) 15mm quarter turn angular stop cock, 32 mm C. P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. 25.10.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) 25.10.2 White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140 mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) 1156 25.11 Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated urinal (Inbuilt spreaders, bottle trap and ceramic waste coupling) with 15mm brass pressmatic auto closing concealed urinal flush valve with wall flange (decol technology, 400000 operation warranted) i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . 25.11.1 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) 25.11.2 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 475x315x715 mm. (Premium Range) 25.11.3 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 385x325x635 mm. (Premium Range) 1157 25.12 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . 25.12.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock. (Premium Range) 25.12.2 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) 1158 25.13 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) with 15mm Brass made pressmatic (Decol technology, 400000 operation warranted) concealed flushing Stop cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . 25.13.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480x300x740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) 1159 25.14 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensor complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required. 25.14.1 White Vetrious China made Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) Size 340x325x650 mm with sensor (Premium Range) 25.14.2 Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 7475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor for flushing. (Premium Range) 1160 25.15 Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with chrome plating. (Premium Range) 1161 25.16 Providing & Fixing 8mm thick froasted Urinal glass partition size height 900 mm top width 450mm and bottom width 300mm brass made bracket with chrome plating. (Premium Range) 1162 25.17 Providing & Fixing plain bath tub of size 180x80x47cm body made of PMMA (Poly Methyl metha acrylate) with 20mm wooden reinforcement. (Premium Range) 1163 25.18 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Pillar cock. (Premium Range) 1164 25.19 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Bib cock. (Premium Range) 1165 25.20 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating. 10 micron and chrome plating 0.3 micron, quarter turn) Angular stop cock. (Premium Range) 1166 25.21 Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Concealed stop cock. (Premium Range) 1167 25.22 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Wall Mixer with 115mm bend. (Premium Range) 1168 25.23 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 3-in1 Wall Mixer .(Premium Range Sanitary Ware) 1169 25.24 Providing and fixing in position best Indian C. P. brass made quarter turn (Ceramic disc Size 25mm) Flush Cock for Indian W. C. (Orissa Pan). (Premium Range) 1170 25.25 Providing and fixing in position best Indian single Lever Auto Mixing Wall Mixer (Cartridge Size 40mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) 1171 25.26 Providing and fixing in position best Indian single Lever Auto mixing Basin Mixer (Cartridge Size 32mm, nickel plating 0.10 micron and chrome plating 0.3 micron) For Wash Basin area use only. (Premium Range) 1172 25.27 Providing and fixing in position best Indian single Lever Auto Mixing Diverter (Cartridge Size 47mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) 1173 25.28 Providing and fixing in position best Indian C. P. brass made Spout (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1174 25.29 Providing and fixing in position best Indian C. P. brass made Shower Arm Length 300mm (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1175 25.30 Providing and fixing in position best Indian C. P. brass made Shower Arm Length 450mm (nickel plating 0.10 micron and chrome plating 0.3 micron).(Premium Range Sanitary Ware) 1176 25.31 Providing and fixing in position best Indian C. P. brass made Shower Arm Length 600mm (nickel plating 0.10 micron and chrome plating 0.3 micron) .(Premium Range Sanitary Ware) 1177 25.32 Providing and fixing in position best Indian shower rose 300x300mm square body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range Sanitary Ware) 1178 25.33 Providing and fixing in position best Indian shower rose 150mm dia, body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) 1179 25.34 Providing and fixing in position best Indian shower rose 200mm dia body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles .(Premium Range) 1180 25.35 Providing and fixing in position best Indian shower rose 240mm body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) 1181 25.36 Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 2- way Bib Cock .(Premium Range) 1182 25.37 Providing and fixing in position best Indian Health Faucet with 8mm dia 1.20 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall).(Premium Range Sanitary Ware) 1183 25.38 Providing and fixing in position best Indian Auto Closing Pillar Cockdody with 65 mm extension (with DECOL cartridge) for wash basin use. (Premium Range) 1184 25.39 Providing and fixing in position best Indian Auto Closing Bib Cock with built in control cock wihh wall flange (with DECOL cartridge) for common area use. (Premium Range) 1185 25.40 Providing and fixing in position best Indian Auto Closing Urinal valve open type with built in control cock wihh wall flange (with DECOL cartridge) for urinal use only. (Premium Range) 1186 25.41 Providing and fixing in position best Indian Auto Closing Urinal valve concealed type (with DECOL cartridge) for urinal use only. (Premium Range) 1187 25.42 Providing and fixing in position best Indian Auto Closing wall mounted Pillar Cock (with DECOL cartridge) for wash basin use only. (Premium Range) 1188 25.43 Providing and fixing in position best Indian Auto Closing 40mm Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) 1189 25.44 Providing and fixing in position best Indian Auto Closing 40mm Dual Flow (3.0/6.0 liter) Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) 1190 25.45 Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range) 1191 25.46 Providing and fixing in position best Indian Sensotronic Sensor Faucet for Wash Basin use only. (Premium Range) 1192 25.47 Providing and fixing in position best Indian Sensotronic Sensor battery & electrical oprated type (9V transformer) Faucet For Urinal use only. (Premium Range) 1193 25.48 Providing and fixing in position best Indian Sensotronic Sensor concealed type Faucet For Wall Mounted Water Closet use only. (Premium Range) 1194 25.49 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 300 mm long. (Premium Range) 1195 25.50 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 600 mm long. (Premium Range) 1196 25.51 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Swivel Towel holder Twin Type. (Premium Range) 1197 25.52 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Ring Square. (Premium Range) 1198 25.53 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish Holder. (Premium Range) 1199 25.54 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dispenser with Metallic Bottle. (Premium Range) 1200 25.55 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Tumbler Holder. (Premium Range) 1201 25.56 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet paper holder with Flap. (Premium Range) 1202 25.57 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet Roll Holder. (Premium Range) 1203 25.58 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Glass Self-size 600mm with toughened glass (Premium Range) 1204 25.59 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Double coat Hook. (Premium Range) 1205 25.60 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Towel Rake 600 mm. (Premium Range) 1206 25.61 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) W. C. Brush Holder. (Premium Range) 1207 25.62 Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with. (Premium Range) 1208 25.63 Wall Hung Basin: Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) 25.63.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) 25.63.2 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) 25.63.3 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) 25.63.4 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 500x440x385 mm. (Premium Range) 25.63.5 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 635x485x305 mm. (Premium Range) 1209 25.64 Wall Hung Basin ; Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, 15 mm C. P. brass pillar cock, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) 25.64.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 635x430x190 mm. (Premium Range) 1210 25.65 Providing and fixing in position best Indian, quarter turn table mounted sink mixer (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1211 25.66 Providing and fixing in position best Indian, quarter turn wall mounted sink cock (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1212 25.67 Shower Glass Cubical: Providing and fixing toughen glass shower enclosure conformed Is 2553 (part 1. 1990) or IS 14900. 2000 or IS 2835.1987 or IS 14450. 2000 with C. P. brass 5 Year warranted hardware, 19mm dia SS 304 grade stabilizer, all plastic Parts of food grade plastic and all glass shall be toughened at 700 degree Celsius and Anti lime scale treated including painting of fittings, cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) 25.67.1 Providing and fixing corner entry 6 mm toughen glass made to measurement shower enclosure size 1200mm x1200mm x 1950mm with aluminum profile on sides, shower enclosure with door sliding on both sides. (Premium Range) 25.67.2 Providing and fixing 8 mm toughen glass wall to wall sliding shower enclosure with one fixed glass and one silding door with a Towel Rod Fixed on the fixed glass size Hight:2000 mm Width: 1500mm to 2000mm. (Premium Range) 25.67.3 Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed withwall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) 1213 25.68 Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed with wall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) 1214 25.69 providing and fixing white tempered glass showerpenal with special Surface body materials tempered glass with glass special surface PVC back. ABS Movable tops Shower, 4 moveable ABS body massage jets, Hand shower with fiexible hose,Brass Sout, shelf, Thermostatic mixer with diverter, 40 cm stainless steel braided hose, Minimum water pressure required 2 bar. 1215 25.70 Thermostat Mixer : Providing and fixing in position best Indian, concealed high flow bath and shower mixer with thermostatic control cartridge (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) 1216 25.71 Providing and fixing in position best Indian, exposed wall mounted bath and shower mixer with thermostatic control cartridge with button attachment on spout with connecting legs and wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) .(Premium Range) 1217 25.72 Providing and fixing in position best indian, eko exposed shower mixer (wall mounted) with thermostatic control cartridge, 115mm long bend pipe on lower side, connecting legs and wall flange (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) 1218 25.73 Providing and fixing in position best Indian, exposed shower mixer (tub mounted) with thermostatic control cartridge, with button attachment on spout with straight legs (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) 1219 25.74 Providing and fixing in position best Indian, 4 - way diverter consisting of concealed body and wall flange for multiple shower working with one shut-off position and 3 outlets for body shower, head shower and spout ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) 1220 25.75 Providing and fixing in position best Indian, thermostatic concealed high flow control valve with wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) 1221 25.76 Medical Faucets : Providing and fixing in position best indian, single lever surgical purpose elbow action basin mounted mixer with extended Operating lever without popup waste system with 450mm long braided hoses (cartage size32mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) 1222 25.77 Providing and fixing in position best Indian, surgical purpose elbow action pillar cock with extended Operating lever.( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) (Premium Range) 1223 25.78 Providing and fixing in position best Indian, surgical purpose elbow action wall mounted pillar cock with extended Operating lever and wall flange. (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) 1224 25.79 Providing and fixing in position best Indian, 692mm long, satin finish C. P. Brass grab bar made of 304 grade ss i/c all nuts and screw (0.3 micron chrome and 10 micron nickel plated). (Premium Range) 1225 25.80 Providing and fixing in position best Indian, satin finish, C. P. Brass grab bar with left/right 90 degree angle, made of 304 grade ss i/c all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) 1226 25.81 Providing and fixing in position best Indian, C. P. Brass grab bar vertical swing, 304 grade ss made all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) 1227 25.82 Providing and fixing 8mm thick frosted safety glass Urinal partition size 900mm height and 450mm width, fixed with C P brass bracket of appropriate size i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete.(Premium Range) 1228 27.4 Providing and fixing Stainless steel plate 304 grade of 1.50mm thick, including writing with Embossing of letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. 1229 27.5 Providing and fixing of name plate for offices name of Stainless steel plate 304 grade of 1.50mm thick, including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. 1230 27.6 Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with 1.25m Chromium plated Steel Pipe 15mm dia, compete as per direction of Engineer-in-Charge. 1231 27.7 Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer-in-Charge. 1232 27.8 Providing and fixing stainless steel English (Capital) and Hindi letters in standard pattern bellow type made with 1.20 mm thick stainless steel (ASI Grade- 304 ) Depth of letter shall not be less than 30mm and rate includes welding/soldering of joints polishing, buffing and fixing on the wall, plate and beam surface at any height with necessary nut and bolts/fastener wherever is required complete as per direction of Engineer-in-Charge. 1233 27.10 Providing and fixing of prestressed vertically casted concrete panels (both surfaces should be smooth and having grooves on both faces) of M-40 grade of concrete of size 2100x300x50 mm having minimum 4 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed horizontally in full length of panel with prestressed precast concrete column of M-40 grade of size 3000x150x150 mm having minimum 7 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed vertically in full length to erect precast boundary wall panels to height 2100 mm from GL including excavation of pit of size 750x750x900 mm in all kind of soil except rock for erection of columns and grouting the pit with M-20 grade of concrete. Manufacturing, transportation and installation at site all complete as per the direction of Engineer-in-Charge. 1234 27.11 Extra for every additional height of 0.3 m up to height of wall 3 m 1235 28.35 Providing and fixing of 3 seater stone bench made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1500mm, width 600mm, legs height 500 mm, back support height 500mm. 1236 28.36 Providing and fixing of stone planter (bench) made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1200mm, width 500mm, legs height 500 mm. 1237 28.37 Providing and fixing of stone table made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1000mm, width 600mm, legs height 750 mm. 1238 28.38 Providing and laying C.C. pavement of mix M- 25 with ready mixed concrete from batching plant including centering and shuttering complete. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, with wire brush etc. complete as per specifications and directions of Engineer- in-Charge.Note: Cement content considered in this item is @ 330 kg/cum. 1239 29.1 Preparation of site plan and location plan with total station surveying showing all individual structures and features like trees, roads, culverts, nallas, electric poles, telephone poles, sewer lines, chambers, water supply lines, hand pumps, well etc. complete along with showing location of roads proposed in master plan. i/c Contours of entire area at 0.5 m. intervals using auto level, preparing of site plan in soft copy (using autocad) in suitable scale as desired by engineer-in-charge duly indicating north direction. Rate includes providing 1 digital copy and six hard copies, one print on tracing film, khasra map duly showing the land and location plan (index plan) and google image of the land. Rates are inclusive of transportation charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) 29. 1.1 Upto 1 Hectare 29.1.2 1 Hectare to 2 Hectare 29.1.3 Add extra for each additional one Hectare or part there off 29.1.4 Excavation of trial pit of size 1.20 m X 1.20 m with minimum depth of 0.9 m and maximum depth of 3.5m as directed by the Engineer in Charge. Trial pit shall be taken at suitable location/ locations as directed by Engineer in charge and shall be indicated on the site plan showing details of soil strata. 1240 29.2 Preparation of double line plan after measurement of internal as well as external dimensions of existing buildings/structures and plotting the same in suitable scale as directed by Engineer-in-charge. 1241 29.3 Preparing of double line plan for planning of addition and alteration work after measurement of internal as well as external dimensions and details of existing door window, ventilator openings and partitions, addition /alteration done previously in buildings/structures and plotting the same separately showing sectional elevations (minimum two numbers) and all elevations along with all relevant details like doors, windows stairs etc in suitable scale as directed by Engineer-in-charge. The consultant shall also submit detailed condition survey report. 1242 29.4 Performing Plate Load Test (P.L.T.) for Determining soil bearing capacity (SBC) at site including submission of Geotechnical Report and recommending bearing capacity in accordance with IS-1888-1982 (Without Conveyance). 1243 29.5 Performing Standard Penetration Test for determining soil bearing capacity (SBC) in accordance with IS-2131-1981 and submission of Geotechnical Report on bearing capacity based on SPT in accordance with IS-6403-1981 (Without Conveyance) 1244 29.6 Transportation charges for transportation of Geotechnical testing equipments for plate load test or standard penetration test upto a distance of 100km. (upto 100km going and 100km returning from district H.Q. both way) Rates are inclusive of Loading and unloading of testing equipments and other incidental charges during both journeys to be paid only once for one set (separate for PLT or SPT) of testing. 29.6.1 Up to 100km (both way) 29.6.2 Add extra for distance beyond 100km and upto 150km. (both way) 29.6.3 Add extra for every additional km beyond 150km (both way) 1245 29.7 Preparation of detailed estimate on the basis of the working drawing supplied by the department and current SOR applicable, including computation of bill of quantities (BOQ) of material and supplying the same in six hard copies and one soft copy to the Engineer-in-Charge and if required revision of the same without any additional charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) The estimate shall be prepared only in standard format prescribed as per appendix 14 of this SOR. 1246 29.8 Preparation of DPR including site visit to verify contours & soil reports and preparation of master plan of campus including architectural working drawings and estimates in prescribed format as per appendix 14 of this SOR to obtain AA; and there after architectural drawings for statutory approvals and detail drawings at construction stage; and as constructed drawings on completion of work the DPR. Bifurcation of professional fee payable in stages as per this item shall be in accordance with List-1, List-2 & List-3. Given in preambles of this chapter 3.All work such as preparation of DPR, working drawings, statuary drawings, details drawings and as constructed drawings shall be done by the same architect/consultant to ensure consistency in services, even if time required to complete all stages as per Activity sheet exceeds the contract period. 1247 29.9 Preparation of the structure design & drawings by a structural engineer empanelled with the Chief Architect MP PWD on the basis of architectural drawings supplied/approved by the department, in accordance with relevant codes/manuals and according to the Terms & Conditions, prescribed in Activity Sheet No-1, List-4 given in Annexure-14 appended with SOR. Design and drawing shall also include ‘Tables’ for the bar-bending schedules (BBS) and concrete/steel consumption. The design and drawing shall be submitted to the Engineer-in-Charge in six hard copies and one soft copy for execution. The payment shall be done in accordance with relevant stage in activity sheet and list. 29.9.1 First time design work 29.9.1.1 Built up area upto 500 sqm 29.9.1.2 Built up area more than 500 sqm and upto 3000 sqm 29.9.1.3 Built up area more than 3000 sqm. 29.9.2 Repetition of structural design of a structural design done by the structural himself or by any other structural engineer at different site, where S.B.C. or seismic zone is different.(only plinth area payment to be paid) 29.9.2.1 Plinth area upto 500 sqm 29.9.2.2 Plinth area more than 500 sqm and upto 3000 sqm 29.9.2.3 Plinth area more than 3000 sqm 1248 29.10 Assessment of load carrying capacity and structural soundness of existing building mainly comprising of R.C.C. structure using existing information such a existing drawing, design and footing details, if available. The consultant shall carry out destructive/non destructive testing of structure at site including site investigation which may require opening of footings by digging adjoining ground fill and restore backfill structure after testing is done. This work shall be performed by a structural engineer (proof checking) empanelled with the chief Architect MP PWD Bhopal or any government engineering college. The rate shall include all charges for labour, testing, consultation of geotechnical consultant and site visit to carry out site testing Per Sqm (built up area of wing/block of existing building where construction is proposed). 1249 29.11 Drafting structural drawing on the basis of the structural design supplied by the department in accordance with all relevant codes/manuals and as per IS: 1893- 2002 and IS: 13920-1993 with updation. The work shall include making revision/compliance if any and obtaining approval of drafting work, without any additional cost within time specified by the Engineer-in-Charge or from the competent authority. The drawings for approval shall be submitted to the Engineer- in- Charge in two hard copies (minimum size A-2) and there after fair drawings on 100 micron film along with seven copies of amonia prints (minimum size A-1) and one soft copy. Drawings shall be stamped and signed with the statement that Drafted by me as per structural design done or got done by the department. Note:- This work can be done only through a person having qualification of Diploma in civil engineering/BE (civil engineering) and having certificate in AutoCAD issued by AutoDesk or by its authorized institution.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Madhya Pradesh View Result →
22.
Educational and Research Institute #9701605 AOC
Bids Are Invited For Custom Bid For Services - Staff Quarters Repair & Maintenance; 1 SCHOOL BUILDING (A) CLASSROOM (i) CLASSROOM DESK LARGE SIZESupply & installation Big Desk (for two persons)-The overall dimensions of desk will be 1066mm x 930mm x Height 760mm, complete as per Specifications enclosed and direction of Engineer-in- charge having the Table top shall be made up of 18.0 mm thick plywood IS 303 of MR Grade OSL (one side shall be laminated, and other side shall have balancer finish). Table top dimensions shall be W 930 mm x D 380 mm. Edge towards bench shall be post formed with round edge. The remaining three edges must be sealed with 2mmthick PVC edge banding tape. Edge band must be trimmed on edges and corners. The desk shall be have low chemical emission of VOCs (Voltage Organic Compounds) and carcinogens, contributing to a healthier room environment. Seat and back rest shall be made of 18mm thick plywood of MR Grade OSL (one side shall be laminated, and other side shall have balancer finish) except back rest. Back rest shall be have both sides colour lamination.Technical details of seat and back rest are mentioned below:Seating bench dimensions shall L 930 mm x W 300 mm x H 450 mm. Front side shall be rounded with post forming. Remaining three edges shall sealed with 2mm thick PVC edge banding tape.Back rest dimensions shall L 930 x H 200 mm Upper side shall be rounded with post forming Remaining three edges shall be sealed with 2mm thick PVC edge banding tape. Desk Shelve shall be made of prime quality 0.8mm thick CRCA sheet of H150mmxD300mm and side stiffeners of CRCA tube size 19mmx19mmx1mmthick. One vertical support (partition) of square tube size 25mm square x1.2mm thick must be provided at centre of tray . Upper modesty made of prime quality 0.8mm thick CRCA Sheet Powder Coated should be embossed with dimples in round shape, height will be 150mm, there should be Perforated lower modesty Made of prime quality 0.8 mm thick CRCA sheet of size H150mmXD21mm with square perforation, CRCA Tube of size 19x19x1mm thick to be inserted for full length at bottom of Jali . Bag hook should be provide on both side of piller made of minimum 4mm dia rod Side frame structure:- Made of prime quality CRCA pressed form section 165mmx25mmx1mm thick welded to 25mmx50mmx1.2mm thick CRCA tube , Seat and back side frame structure made of prime quality CRCA pressed form section 165mmx25mmx1mm thick welded to 25.4mm diameter x 1.6mm thick ERW-1pipe , there will be 8no. horizontal supports are 25mmx25mmx1.2mm thick CRCA pipes. .Bottom Rectangular tube 50x25x 1.2mm thick should be closed with PPCP cap bothside sand pipe dia. 25.4x1.6mm thick should be closed with metal (Backside) and other side (Undertheseat) PPCP cap, complete as per engineer incharge Desk should be in semi knock down form with the help 16 connecting pipes ; 8 pipes on each side : connecting pipe size will be 20x20x1.2mm .All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations with CO2 Welding Shall Be Used , CRCA Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² , Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 tank treatment with minimum 45-50 micron powder coating. (ii) CLASSROOM DESK MEDIUM SIZESupply & installation Medium Desk (for two persons)-The overall dimensions of desk will be 900mm x 890mm x Height 690mm, complete as per Specifications enclosed and direction of Engineer-in- charge having the Table top shall be made up of 18.0 mm thick plywood IS 303 of MR Grade OSL (one side shall be laminated, and other side shall have balancer finish). Table top dimensions shall be W 890 mm x D 380 mm. Edge towards bench shall be post formed with round edge. The remaining three edges must be sealed with 2mmthick PVC edge banding tape. Edge band must be trimmed on edges and corners.The desk shall be have low chemical emission of VOCs (Voltage Organic Compounds) and carcinogens, contributing to a healthier room environment. Seat and back rest shall be made of 18mm thick plywood of MR Grade OSL (one side shall be laminated, and other side shall have balancer finish) except back rest. Back rest shall be have both sides colour lamination. Technical details of seat and back rest are mentioned below:Seating bench dimensions shall L 890 mm x W 300 mm x H 400 mm. Front side shall be rounded with post forming. Remaining three edges shall sealed with 2mm thick PVC edge banding tape. Back rest dimensions shall L 890 x H 200 mm Upper side shall be rounded with post forming Remaining three edges shall be sealed with 2mm thick PVC edge banding tape. Desk Shelve shall be made of prime quality 0.8mm thick CRCA sheet of H150mmxD300mm and side stiffeners of ss CRCA tube size 19mmx19mmx1mmthick. One vertical support (partition) of square tube size 25mm square x1.2mm thick must be provided at centre of tray . Upper moedsty made of prime quality 0.8mm thick CRCA Sheet Powder Coated should be embossed with dimples in round shape, height will be 150mm, there should be Perforated lower modesty Made of prime quality 0.8 mm thick CRCA sheet of size H150mmXD21mm with square perforation, CRCAT ube of size 19x19x1mm thick to be inserted for full length at bottom of Jali . Bag hook should be provide on both side of piller made of minimum 4mm dia rod Side frame structure:- Made of prime quality CRCA pressed form section 165mmx25mmx1mm thick welded to 25mmx50mmx1.2mm thick CRCA tube , Seat and back side frame structure made of prime quality CRCA pressed form section 165mmx25mmx1mm thick welded to 25.4mm diameter x 1.6mm thick ERW-1pipe , there will be 8no. horizontal supports are 25mmx25mmx1.2mm thick CRCA pipes. Bottom Rectangular tube 50x25x 1.2mm thick should be closed with PPCP cap bothside sand pipe dia. 25.4x1.6mm thick should be closed with metal (Backside) and other side (Undertheseat) PPCP cap, complete as per engineer incharge Desk should be in semi knock down form with the help 16 connecting pipes ; 8 pipes on each side : connecting pipe size will be 20x20x1.2mm .All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations with CO2 Welding Shall Be Used , CRCA Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² , Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 tank treatment with minimum 45-50 micron powder coating. (iii)TEACHER TABLE :Supplying and installation of knock down type Office Table made of Pre-laminated MDF board with decorative lamination on one side and balancing lamination on other side top of size 1200 X 600 X 750 mm. Worktop shall be rounded in all four corners and should have an overhung of 50mm alongwith one drawer unit made of 0.5mm thick CRCA Steel sheet. The table top shall be supported over legs consists of 4 Powdered coated MS legs with connected beams with pipe size 25x25x1.2 mm thick. (iv)Teachers Chair, Overall Dimension:- W600±10 x 600D ±10 x 890H ±10 mm,Seat of Medium back Visitor chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat , Used PU Moulded foam on Seat of D-45 kg/m3, Back of Medium back chair is made of Injection moulded PP material structure with Mesh fabric, Seat Size:- 460W ±10 x 470D±10 x 60Thick. ±5 mm , Back Size:- 440W ±10 x 470H ±10,Armrest:- Fixed PP armrest ,Understructure:- Cantilever frame made SS Polished Finish round pipe with Plastic bushes . Frame Material -SS 202 Polished Finish (v) TEACHER BOARD [Excluding cost of Interactive Flat-Panel Display (IFPD)]Technical Specification for Smart Board with Double-Track Sliding System for Green and White Boards fitted in an Anodised Aluminium Frame with concealed cable management and provision for mounting of Digital Screen:Supply, installation, testing, commissioning (SITC) of an integrated digital teaching–learning solution comprising: (a) Anodised Aluminium Frame, double track sliding system for white & green board and provision for mounting of digital screen with concealed cable management,(b) Vitrified magnetic ceramic-steel Green Board and White Board panels. • Dimensions and Configuration: Total Width of the Setup is ~12 feet and height ~4.0 feet from the board surface (excluding the width of aluminium frame).• Material: Providing and fixing anodised aluminium (alloy 6063-T6) framed sliding system for smart board with minimum 2.0 mm thick extruded sections, anodised to AA15 grade as per IS 1868, mounted on a heavy-duty top-hung aluminium track (min. 2.5 mm thick) with sealed ball-bearing nylon/PU rollers (load capacity not less than 120 kg per panel), concealed bottom guide, EPDM gaskets, SS-304 fasteners, pelmet/valance cover, and soft end-stops/soft-close mechanism, including all brackets, fixings, alignment, cable provisions, commissioning, and making good complete as per drawings and Engineer-in-Charge.• Design: One slot to fix IFPD, other slot for Green & White boards sliding on double track system with Locking facility on sliding frame to keep the IFPD display safe.• Top & Bottom Rails: Tracks shall be aligned and reinforced to ensure boards move easily and without wobble.• Back Side: The backside of the smart board, to concealed the wall surface, provided & fixed with 18 mm thick HDHMR board laminated (white coloured matte finish) with 0.8 mm, edges sealed with 1 mm PVC edge banding, fixed to the anodised aluminium frame with concealed screws/rivets, with ventilation slots as required, and shall be moisture, termite and borer resistant.• Load Capacity: Safe to hold IFPD + white & Green boards with ≥1.5× safety factor.• Cable Management: Built-in channels for power, LAN, HDMI, USB.• Safety: Rounded edges, tamper-resistant covers, concealed fixing. • Finish: Durable, corrosion-resistant coating suitable for indoor use.• Additional Requirements: (a) All boards and the structure must be securely fixed to the wall with appropriate fasteners.(b) Provision for cable management must be included for the IFPD (i.e., concealed conduit/path for power and data cables). (c) The unit must be free from sharp edges, splinters, or any protruding parts that could cause injury.(d) Installation height should ensure comfortable writing access for average adult and student height (typically bottom edge ~2.5 to 3 feet from the floor).(b) Vitrified magnetic ceramic-steel Green Board and White Board panels:• Function: Boards shall slide horizontally on a top and bottom aluminium/steel channel track to fully cover or reveal the IFP as needed.• Material: Vitrified ceramic-steel, magnetic, double-coated.• Sliding Boards: Quantity: 1 no. Green board & 1 no. White board.• Green Board Surface: Matte, chalk-friendly, stain/scratch resistant.• White Board Surface: Glossy surface, Dry-erase marker friendly, ghost-free, easy clean.• Size: ~6 feet (W) × 4 feet (H) (Each Board) with thickness 8mm.• Frame: Anodised aluminium, rounded edges, concealed fasteners.Note - Dimensions mentioned are indicative. Actual may vary as per site requirements (B) PRINCIPAL AND VICE-PRINCIPAL ROOM TABLE:Supplying and installation of site knock down type Office Table as per approved design and directrion of Engineer-in-charge.Work Top - Work top shall be made 25mm thick Pre-laminated MDF board with decorative lamination on one side and balancing lamination on other side confirming to IS 12406:2003 with post forming on front, back and machine pressed PVC egde banding 2mm thick glued with industrial adhesive and diffused with board monolithically on other two sides. Table top shall have 75mm overhung on front and 25mm overhung on sides.Understructure- C-type leg shall be made of tubular section of 50mm x 50mm x 1.6mm (wall thickness) thick vertical member and 40mm x40mm x1.6mm (wall thickness) Horizontal M.S. pipe confirming IS-Grade 4932 shall be finished with epoxy polyster powder coated DFT 50-60 Micron. The legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 15mm. The cross members shall be mounted by end brackets made of 3mm thick CRCA steel sheet confirming IS 513: 2008 and finished with epoxy polyster powder coated DFT 50-60 Micron confirming IS 13871:1993.Wire management - Electrical wires shall be carried from horizintal/ vertical duct made of 0.7mm CRCA steel sheet confirming to IS 513:2008. The switch plate or grommet depending upon requirement shall also be provided for electrical/LAN connection on table top.Modesty Panel -Modesty Panel of height 450mm shall be made of 1.5mm thick CRCA sheet sheet confirming to IS 513: 2008 and shall be finised with epoxy polyster powder coated DFT 50-60micron.Storage body- Storage top shall also be made of 25mm thick Pre-lam MDF board confirming to IS 12406:2003 with post forming on two sides and machine pressed PVC egde banding 2 mm thick glued with industrial adhesive and diffused with board monolithically on other two sides. The body of storage units shall be made of 0.8mm thick CRCA steel Sheet and skirting shall be of 1.2mm thick CRCA steel sheet confirming to IS 513: 2008 finished with epoxy powder coated of DFT 50-60 Micron confirming IS 13871:1993. Internal Shelves shall be also made up of 0.8mm CRCA steel sheet confirming to IS 513: 2008 and shall be mounted with the Metal shelf support pin made of 2mm thick CRCA Steel sheet with Nickel or Chrome plating. M10 screw leveler is given with height adjustment up to 12mm to 15mm. (i) PRINCIPAL ROOM TABLETable of Size 1800mm (W) x 900mm (D) x 750mm (H) with Side Storage of Size 900mm (W) x 450mm (W) X 750mm (H) and Back Storage 1800mm (W) x 450mm (D) x 750mm (H) as per specifications above (ii) VICE-PRINCIPAL ROOM TABLETable of Size 1650mm (W) x 900mm (D) x 750mm (H) with Side Storage of Size 900mm (W) x 450mm (W) X 750mm (H) and Back Storage 1650 mm (W) x 450mm (D) x 750mm (H) as per specifications above. (iii) PRINCIPAL ROOM CHAIRHigh Back Revolving Chair, Overall Dimension:- 700W ±10 x 700D ±10 x 1210H ±10 mm,Seat of Medium back chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat,Used PU Moulded foam on Seat of D-45 kg/m3 , Back of chair is made of Injection moulded PP material structure upholstered with Mesh fabric , Adjustable Lumber support upholstered with fabric , Adjustable Headrest on back Upholstered with Mesh Fabric ,Seat Size:- 470W ±10 x 460D ±10 x 70Thick. ±5 mm , Back Size: 500W ±10 x 780H ±10,Mechanism:- The Synchro tilt Mechanism ,Used gaslift of 90 mm size of Class-IV grade,Armrest:- PU padded adjustable armrest fixed with Seat ,Chair Base & Wheels: SS 202 Polished finish Plated base consists of 5 prongs with 640±5 mm pitch circle diameter, 50mm Dia. Black Nylon - Twin Wheel Pin castor . (iv) Principal room Visitor Chair, Overall Dimension:- W600±10 x 600D ±10 x 890H ±10 mm,Seat of Medium back Visitor chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat , Used PU Moulded foam on Seat of D-45 kg/m3, Back of Medium back chair is made of Injection moulded PP material structure with Mesh fabric, Seat Size:- 460W ±10 x 470D±10 x 60Thick. ±5 mm , Back Size:- 440W ±10 x 470H ±10,Armrest:- Fixed PP armrest ,Understructure:- Cantilever frame made SS Polished Finish round pipe with Plastic bushes . Frame Material -SS 202 Polished Finish (v) VICE-PRINCIPAL ROOM CHAIRHigh Back Revolving Chair, Overall Dimension:- 700W ±10 x 700D ±10 x 1210H ±10 mm,Seat of Medium back chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat,Used PU Moulded foam on Seat of D-45 kg/m3 , Back of chair is made of Injection moulded PP material structure upholstered with Mesh fabric , Adjustable Lumber support upholstered with fabric , Adjustable Headrest on back Upholstered with Mesh Fabric ,Seat Size:- 470W ±10 x 460D ±10 x 70Thick. ±5 mm , Back Size: 500W ±10 x 780H ±10,Mechanism:- The Synchro tilt Mechanism ,Used gaslift of 90 mm size of Class-IV grade, Armrest:- PU padded adjustable armrest fixed with Seat ,Chair Base & Wheels: SS 202 Polished Finish base consists of 5 prongs with 640±5 mm pitch circle diameter, 50mm Dia. Black Nylon - Twin Wheel Pin castor . (vi) Vice Principal Visitor Chair: Overall Dimension:- W600±10 x 600D ±10 x 890H ±10 mm,Seat of Medium back Visitor chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat , Used PU Moulded foam on Seat of D-45 kg/m3, Back of Medium back chair is made of Injection moulded PP material structure with Mesh fabric, Seat Size:- 460W ±10 x 470D±10 x 60Thick. ±5 mm , Back Size:- 440W ±10 x 470H ±10,Armrest:- Fixed PP armrest ,Understructure:- Cantilever frame made SS Polished Finish round pipe with Plastic bushes . Frame Material -SS 202 Polished Finish (C) SOFA SET (i)SOFA FOYER ONE SEATER Size in mm - 880(L) X 755(D) X 750(H) Seat Wooden Structure Uphostered With Leatherite & HD Foam 32 Softy. SS Chrome . Sofa S57 Max. Height 750mm . The rounded Armrests Provided Sleek And Stylish Look With The Pillowed Back . Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25mm Round Spiral Spring . Legs Round Pipe Chrome Plated Legs . Understructure Made of Base Frame Strongly Jointed Wooden Plywood Parts . 3 Seater Sofa Seat Height From Ground 460mm .3 Seater Sofa 2020W x 760D x 750H , 2 Seater Sofa 1450W x 760D x 750H . Seat Height From Ground 460mm & 1 Seater Sofa 880W x 760D x 750H . 100mm High Legs. (ii)SOFA FOYER TWO SEATER Size in mm - 1460(L) X 755(D) X 750(H)Seat Wooden Structure Uphostered With Leatherite & HD Foam 32 Softy. SS Chrome . Sofa S57 Max. Height 750mm . The rounded Armrests Provided Sleek And Stylish Look With The Pillowed Back . Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25mm Round Spiral Spring . Legs Round Pipe Chrome Plated Legs . Understructure Made of Base Frame Strongly Jointed Wooden Plywood Parts . 3 Seater Sofa Seat Height From Ground 460mm .3 Seater Sofa 2020W x 760D x 750H , 2 Seater Sofa 1450W x 760D x 750H . Seat Height From Ground 460mm & 1 Seater Sofa 880W x 760D x 750H . 100mm High Legs. (iii)SOFA FOYER THREE SEATER Size in mm - 1930(L) X 755(D) X 750(H)Seat Wooden Structure Uphostered With Leatherite & HD Foam 32 Softy. SS Chrome . Sofa S57 Max. Height 750mm . The rounded Armrests Provided Sleek And Stylish Look With The Pillowed Back . Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25mm Round Spiral Spring . Legs Round Pipe Chrome Plated Legs . Understructure Made of Base Frame Strongly Jointed Wooden Plywood Parts . 3 Seater Sofa Seat Height From Ground 460mm .3 Seater Sofa 2020W x 760D x 750H , 2 Seater Sofa 1450W x 760D x 750H . Seat Height From Ground 460mm & 1 Seater Sofa 880W x 760D x 750H . 100mm High Legs. (iv) Coffee Table The coffee table measures 900 mm (W) × 600 mm (D) × 450 mm (H) and features a 10 mm thick clear tempered glass top and shelf supported on a Stainless Steel 202 frame made of 40×40 mm square tubes with a mirror-polished finish. All joints are argon-welded, ground, and buffed for a seamless look. The lower glass shelf for additional storage, and rubber pads or level adjusters are provided at the base for stability and floor protection. The table combines modern design, durability, and elegant finish, making it ideal for offices and reception areas. (D) STAFFROOM (i) TABLE (SEATING CAPACITY AS PER ACTUAL REQUIREMENT)Supplying and installation of a modular, knock-down center island table sized approximately 3600 mm in length (adjustable to actual requirements) by 1350 mm in width and 750 mm in height, constructed from high-quality 25 mm thick commercial grade plywood or BWR (Boiling Water Resistant) grade plywood with decorative lamination on visible faces and balanced lamination beneath for enhanced strength and moisture resistance. All edges are sealed with 2 mm thick machine-pressed PVC edge banding bonded with industrial adhesive to ensure a seamless, monolithic appearance. The gable ends are fabricated of the same 25 mm thick commercial grade plywood with decorative lamination on both sides and matching edge banding for consistent aesthetics and superior durability. Modesty 18mm matching laminate. The table shall have an underbody vertical support panel running continuously along its length to enhance stability and strength. The understructure uses precision-cut, laminated plywood panels assembled with knock-down fittings for ease of installation and future reconfiguration, ensuring superior load-bearing capacity and long-term durability. A concealed wire management system beneath the worktop integrates pre-laminated plywood cable trays or high-quality plastic trays fixed with durable brackets, complete with provisions for switch plates and grommets to facilitate safe, organized routing of electrical and data cables. All surfaces are finished for scratch and stain resistance with anti-fungal and moisture-resistant properties, and installation will follow best woodworking practices, with final dimensions and seating capacity determined by the actual site layout. (ii) WORK SPACE WITH IN-BUILT LOCKABLE OVERHEAD STORAGE SPACE FOR STAFFROOM (AS PER ACTUAL REQUIREMENT)Supplying and installation of site knock-down type modular wall-mounted workspace unit of approximate size 900W x 600D x 750H mm (for one staff), including working counter and lockable overhead storage cabinet of 900W x 450D x 650H mm. The structure shall be made of 18 mm thick BWP grade plywood with decorative laminate on external surfaces and balancing laminate on inner faces conforming to IS:303/IS:12406. All exposed edges shall be sealed with 2 mm PVC edge banding. The worktop shall be 25 mm thick Laminated Plywood board with post-formed front edge and machine-pressed PVC edge banding, securely fixed to the wall using concealed MS cleats and brackets. The overhead cabinet shall be fitted with soft-close concealed hinges, SS handles, and magnetic catchers of approved make, with one adjustable shelf and modular connectors for alignment and expansion to adjoining units.Each workspace shall include provision for electrical connectivity with 6A/16A modular sockets (as per requirement) positioned at approximately 450 mm above finished floor level for easy access. The worktop shall have a circular cable hole (50–60 mm diameter) with grommet for laptop and equipment wiring. All wiring, sockets, and conduits shall be concealed neatly within the table body, routed through internal PVC raceways to maintain a clean, clutter-free appearance. Junction boxes and ducts shall be integrated to provide safe, organized cable management without visible wiring.The entire unit shall be wall-mounted using heavy-duty MS brackets or suitable fasteners based on wall type, finished neatly with matching silicone sealant at all joints. All fittings and hardware, including soft-close hinges and handles, shall be of reputed make. The unit shall be termite-resistant, moisture-resistant, easy to maintain, and made from ISI-marked prime quality boards. The overall layout and detailing shall match the approved reference image, with actual dimensions finalized as per site requirements and direction of the Engineer-in-Charge. (iii) ChairOverall Dimension:- W600±10 x 600D ±10 x 890H ±10 mm,Seat of Medium back Visitor chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat , Used PU Moulded foam on Seat of D-45 kg/m3, Back of Medium back chair is made of Injection moulded PP material structure with Mesh fabric, Seat Size:- 460W ±10 x 470D±10 x 60Thick. ±5 mm , Back Size:- 440W ±10 x 470H ±10,Armrest:- Fixed PP armrest ,Understructure:- Cantilever frame made SS Polished Finish round pipe with Plastic bushes . Frame Material -SS 202 Polished Finish (iv) PERSONAL LOCKER UNIT FOR PRINCIPAL AND VICE PRINCIPAL ROOMSupplying and installation of Metal Lockers with Cam Lock one unit consiting of 380mm (W) x 450mm (D) x 1800 mm (H) with 4 Lockers.Body-LH and RH Side and back panel is made up of 0.8mm thick CRCA steel sheet confirming to IS 513:2008. Shelf hanging bracket is welded on both the side panel by spot welding. Shelf hanging bracket is made up of 0.8mm thick CRCA steel sheet confirming to IS 513:2008. front frame, top and bottom part made up 0.8mm thick CRCA steel sheet confirming to IS 513:2008 and horizontal part is made up 0.8 mm thick CRCA Steel sheet confirming to IS 513:2008. On a front frame horizontally provision is given at a common distance to hold shutter bracket. Locker’s top is made up of 0.8mm thick CRCA Steel sheet confirming IS 513:2008 which is having standard dimension 375 x378mm. Shelf is also made up of 0.8 mm CRCA Steel sheet confirming to IS 513:2008.Shutter- Is made up on 0.8mm thick CRCA Steel sheet confirming to IS 513:2008. All the shutter are hung on shutter pin and shutter bracket, louvers are given in shutter for air flow. PVC flush handle and name plate is used for handling and for name plate tagging. Standard locking arrangment is used for locking each shutter.The bodies including shelves are given anti-rust surface treatment & are powder coated with epoxy polyester powder coating of DFT 50- 60 Micron confirimg to IS 13871:1993. (E)LIBRARY (i) Supply and installation of Glass-door Storage of Size 915 mm (W) x 482mm (D) x 1980mm (H). It should have shelf thickness of 0.8mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) with clear glass of > 4.0 mm thick and all other components shall have a thickness of 0.8mm. These components shall be made of CRCA steel sheet ‘D’ grade high yield strength as per IS 513:2008 The glass door storwel shall have a SS handle and a Two-way locking mechanism with shooting bolt. It should have a height-wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base.All metal components would be epoxy polyster powder coated DFT 50-60 Micron confirimg to IS 13871:1993. (ii) Wall mounted built in open book shelf : Overall Size 900L (length may vary as per actual requirement) X300DX2100Hmm,Top made up of 18mm thick Postlam plywood with PVC edge banding ,Side panel made up of 18mm thick Postlam plywood with PVC edge bending , Skirting made up of 18mm thick Postlam plywood with PVC edge bending ,back panel made up of 18mm thick Postlam plywood , One number of Bottom Storage Cabinets alongwith the complete length of heght 600mm as per ref. image ,shelf made up of 18mm thick Postlam plywood with PVC edge bending, all Wooden Panels Fix Joints With Minifix Dowels & other Fitting Equipment , All Wooden Panels Prime Quality Board With ISI Marked. Complete structure design should be as per reference image. (iii) TABLE (SEATING CAPACITY AS PER ACTUAL REQUIREMENT)Supplying and installation of a modular, knock-down center island table sized approximately 3600 mm in length (adjustable to actual requirements) by 1350 mm in width and 750 mm in height, constructed from high-quality 25 mm thick commercial grade plywood or BWR (Boiling Water Resistant) grade plywood with decorative lamination on visible faces and balanced lamination beneath for enhanced strength and moisture resistance. All edges are sealed with 2 mm thick machine-pressed PVC edge banding bonded with industrial adhesive to ensure a seamless, monolithic appearance. The gable ends are fabricated of the same 25 mm thick commercial grade plywood with decorative lamination on both sides and matching edge banding for consistent aesthetics and superior durability. Modesty 18mm matching laminate. The table shall have an underbody vertical support panel running continuously along its length to enhance stability and strength. The understructure uses precision-cut, laminated plywood panels assembled with knock-down fittings for ease of installation and future reconfiguration, ensuring superior load-bearing capacity and long-term durability. A concealed wire management system beneath the worktop integrates pre-laminated plywood cable trays or high-quality plastic trays fixed with durable brackets, complete with provisions for switch plates and grommets to facilitate safe, organized routing of electrical and data cables. All surfaces are finished for scratch and stain resistance with anti-fungal and moisture-resistant properties, and installation will follow best woodworking practices, with final dimensions and seating capacity determined by the actual site layout. (iv) Chair, Overall Dimension:- W600±10 x 600D ±10 x 890H ±10 mm,Seat of Medium back Visitor chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat , Used PU Moulded foam on Seat of D-45 kg/m3, Back of Medium back chair is made of Injection moulded PP material structure with Mesh fabric, Seat Size:- 460W ±10 x 470D±10 x 60Thick. ±5 mm , Back Size:- 440W ±10 x 470H ±10,Armrest:- Fixed PP armrest ,Understructure:- Cantilever frame made SS Polished Finish round pipe with Plastic bushes . Frame Material -SS 202 Polished Finish (F) COMPUTER LAB (i) COMPUTER WORK STATIONSupplying and installation of knock down type Dual Computer Work Station of unit Size 1500mm (Length, actual Length may vary as per actual site requirement) x 600m (W) x 750mm (H) for two studentsWork Top- Work top shall be made 25mm thick Laminated Plywood with decorative lamination on one side and balancing lamination on other side confirming to IS 12823: 1990 with 2mm thick Machine pressed PVC edge banding glued with industrial adhesive and monolithically diffused with board on all sides.Understructure supporting frame consist of laminated Plywood Gable ends of 18mm Wire management-The Vertical /Electrical duct & Horizontal Cable tray ( wire carriers) are made of CRCA steel sheet & fixed to the understructure below worktop with specially designed brackets. Provision for fixing Switch plates are privided in the cable tray for easy access through wire mangaer or PVC grommet. (ii) COMPUTER CHAIR FOR STUDENTMedium Back Revolving Chair, Overall Dimension:- 700W ±10 x 700D ±10 x 1010H ±10 mm,Seat of Medium back chair is made of 12mm thick hot pressed plywood pasted with PU Moulded foam with Fabric upholstery on Seat ,Used PU Moulded foam on Seat of D-45 kg/m3 , Back of chair is made of Injection moulded PP material structure combination of upholstered with Mesh fabric , Seat and back connected through metal powder coated plate having Adjustable Lumber support upholstered with fabric , Seat Size:- 490W ±10 x 450D ±10 x 70Thick. ±5 mm , Back Size: 525W ±10 x640H ±10,Mechanism:- The Synchro tilt Mechanism ,Using gaslift of 90 mm size of Class 3 grade,Armrest: PU Padded Adjustable armrest,Chair Base & Wheels: Revolving Pedestal SS 202 Polsihed Finish base consists of 5 prongs with 640±5 mm pitch circle diameter, 50mm Dia. Black Nylon - Twin Wheel Pin castor . (G) LABORATORIES (i) Supply and installation of Glass-door Storage of Size 915 mm (W) x 482mm (D) x 1980mm (H). It should have shelf thickness of 0.8mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) with clear glass of > 4.0 mm thick and all other components shall have a thickness of 0.8mm. These components shall be made of CRCA steel sheet ‘D’ grade high yield strength as per IS 513:2008 The glass door storwel shall have a SS handle and a Two-way locking mechanism with shooting bolt. It should have a height-wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base.All metal components would be epoxy polyster powder coated DFT 50-60 Micron confirimg to IS 13871:1993. (i) PHYSICS LAB ALONG THE WALL TABLE:: Supply and installation of Along-the-wall knock down type modular laboratory tables of size 1400 MM(L) (Length may vary as per actual requirement) × 750 MM (W) × 900MM H . Above the counter, with an internal conduit for all wiring. Modular switch plates and 02 nos of 220V/16A Switch socket (with individual circuit protection) will be CNC-mounted every 1 m (or per site layout). All conduits and components shall comply with applicable laboratory safety and performance standards. Dust-proof, removable access covers to permit maintenance and future upgrades, and outlets to be ergonomically positioned for seated and standing use. Additional switches and sockets shall be provided as required.All base storage cabinets shall be of the design “1 Drawer + 2 Shutters” made of 0.8 mm thick Powder Coated CRCA. Each storage box without granite shall be 600W × 570D × 713H, supported on 100 mm legs and shall include rubber shoes at the bottom of each leg to prevent floor damage and ensure stability. The upper top shall be of 18-19 mm thick black granite, with all joints sealed using silicon sealant. The cabinet bodies shall be of over-closing design, fabricated entirely on CNC machines to ensure precision. The storage bodies shall be neatly jointed with accurately matched sides to avoid gaps. Shutters shall be made of 0.8 mm thick powder coated CRCA with handles, and drawers shall run on Soft close sliding channels (35-50kg).The worktops shall be of 18-19 mm thick black granite, flushed with sink units and taps. Installation shall include all utility service outlets, accessory fittings, plumbing, electrical switches, and fittings shall be as per requirement.All metallic parts shall be with corrosion resistant coating and shall be welded strongly using CO₂ welding, conforming to safety regulations. Panels shall be secured with nuts, bolts, and riveting. ISLAND TABLE:The laboratory table shall be provided as knock down type modular ISLAND laboratory tables units of overall size 8000(L) (Length may vary as per actual requirement) × 1500(W) × 900H . It shall be constructed in modular segments of 1400(L) × 1500(W) × 860(H) mm each for ease of manufacture, handling, and installation. The worktops will include a powder-coated bus running their full length, above the counter, with an internal conduit for all wiring. Modular switch plates and 04 nos (02 Facing each side) of 220V/16A Switch socket (with individual circuit protection) will be CNC-mounted every 1 m (or per site layout). All conduits and components shall comply with applicable laboratory safety and performance standards. Dust-proof, removable access covers to permit maintenance and future upgrades, and outlets to be ergonomically positioned for seated and standing use. Additional switches and sockets shall be provided as required.All base storage cabinets shall be of the design “1 Drawer + 2 Shutters” made of 0.8 mm thick Powder Coated CRCA. Each storage box without granite shall be 600W × 570D × 713H, supported on 100 mm legs and shall include rubber shoes at the bottom of each leg to prevent floor damage and ensure stability. The upper top shall be of 18-19 mm thick black granite, with all joints sealed using silicon sealant. The cabinet bodies shall be of over-closing design, fabricated entirely on CNC machines to ensure precision. The storage bodies shall be neatly jointed with accurately matched sides to avoid gaps. Shutters shall be made of 0.8 mm thick Powder Coated CRCA with handles, and drawers shall run on Soft close sliding channels (35-50kg).The worktops shall be of 18-19 mm thick black granite, flushed with sink units and taps. Installation shall include all utility service outlets, accessory fittings, plumbing, electrical switches, and fittings shall be as per requirement.All metallic parts shall be with corrosion resistant coating and shall be welded strongly using CO₂ welding, conforming to safety regulations. Panels shall be secured with nuts, bolts, and riveting. (ii) CHEMISTY LAB ALONG THE WALL TABLE: Supply and installation of Along-the-wall knock down type modular laboratory tables of size 1400(L) (Length may vary as per actual requirement) × 750(W) × 900(H) mm × 1550H (two-tier). Four standard SS304 sinks shall be installed, each fitted with a 3-way SS 304 faucet of Premium make. Reagent racks made completely out of stainless steel shall be provided to cover the entire table length(along the wall) except the sink area. These racks shall be 300D × 700H and of complete modular design, consisting of two horizontal storage shelves made of stainless steel with suitable cutouts for electrical switches and sockets. Additional switches and sockets shall be provided as required.All base storage cabinets shall be of the design “1 Drawer + 2 Shutters” made of 0.8 mm thick stainless steel sheet polished finish. Each storage box without granite shall be 600W × 570D × 713H, supported on 100 mm SS legs and shall include rubber shoes at the bottom of each leg to prevent floor damage and ensure stability. The upper top shall be of 18-19 mm thick black granite, with all joints sealed using silicon sealant. The cabinet bodies shall be of over-closing design, fabricated entirely on CNC machines to ensure precision. The storage bodies shall be neatly jointed with accurately matched sides to avoid gaps. Shutters shall be made of 0.8 mm thick powder coated stainless steel sheet with handles, and drawers shall run on Soft close sliding channels (35-50kg).Reagent shelves shall be made of a SS 304, provided with electrical switches, sockets, and cutouts as required. The worktops shall be of 18-19 mm thick black granite, flushed with sink units and taps. Installation shall include all utility service outlets, accessory fittings, plumbing, electrical switches, and fittings shall be as per requirement.All metallic parts shall be with corrosion resistant coating and shall be welded strongly using CO₂ welding, conforming to safety regulations. Panels shall be secured with nuts, bolts, and riveting. ISLAND TABLE: The laboratory table shall be provided as knock down type modular ISLAND laboratory tables units of overall size 8000(L) (Length may vary as per actual requirement) × 1500(W) ×900(H) mm × 1550H (two-tier). It shall be constructed in modular segments of 1600(L) × 1500(W) × 860(H) mm each for ease of manufacture, handling, and installation. Four standard SS304 sinks shall be installed, each fitted with a 3-way SS 304 faucet of Premier make. Stainless steel 304 reagent racks shall be provided across the entire table length in centre except the sink areas, with dimensions 300D × 700H. These racks shall also be of modular design with two horizontal stainless steel shelves, cutouts for switches and sockets, provision for electrical outlets, and accommodation for granite pieces.All base storage cabinets shall be of the design “1 Drawer + 2 Shutters” made of 0.8 mm thick Powder Coated CRCA. Each storage box without granite shall be 600W × 570D × 713H, supported on 100 mm SS legs and shall include rubber shoes at the bottom of each leg to prevent floor damage and ensure stability. The upper top shall be of 19 mm thick black granite, with all joints sealed using silicon sealant. The cabinet bodies shall be of over-closing design, fabricated entirely on CNC machines to ensure precision. The storage bodies shall be neatly jointed with accurately matched sides to avoid gaps. Shutters shall be made of 0.8 mm thick powder coated Powder Coated CRCA with handles, and drawers shall run on Soft close sliding channels (35-50kg).Reagent shelves shall be made of a polished finish SS, provided with electrical switches, sockets, and cutouts as required. The worktops shall be of 19 mm thick black granite, flushed with sink units and taps. Installation shall include all utility service outlets, accessory fittings, plumbing, electrical switches, and fittings shall be as per requirement.All metallic parts shall be with corrosion resistant coating and shall be welded strongly using CO₂ welding, conforming to safety regulations. Panels shall be secured with nuts, bolts, and riveting. (iii) BIOLOGY LAB TABLE ALONG THE WALL TABLE: Supply and installation of Along-the-wall knock down type modular laboratory tables of size 1400(L) (Length may vary as per actual requirement) × 750(W) × 900(H) mm × 1550H (two-tier). Four standard SS304 sinks shall be installed, each fitted with a 3-way SS 304 faucet of Premium make. Reagent racks made completely out of stainless steel shall be provided to cover the entire table length(along the wall) except the sink area. These racks shall be 300D × 700H and of complete modular design, consisting of two horizontal storage shelves made of stainless steel with suitable cutouts for electrical switches and sockets. Additional switches and sockets shall be provided as required.All base storage cabinets shall be of the design “1 Drawer + 2 Shutters” made of 0.8 mm thick stainless steel sheet polished finish. Each storage box without granite shall be 600W × 570D × 713H, supported on 100 mm SS legs and shall include rubber shoes at the bottom of each leg to prevent floor damage and ensure stability. The upper top shall be of 18-19 mm thick black granite, with all joints sealed using silicon sealant. The cabinet bodies shall be of over-closing design, fabricated entirely on CNC machines to ensure precision. The storage bodies shall be neatly jointed with accurately matched sides to avoid gaps. Shutters shall be made of 0.8 mm thick powder coated stainless steel sheet with handles, and drawers shall run on Soft close sliding channels (35-50kg)..Reagent shelves shall be made of a SS, provided with electrical switches, sockets, and cutouts as required. The worktops shall be of 18-19 mm thick black granite, flushed with sink units and taps. Installation shall include all utility service outlets, accessory fittings, plumbing, electrical switches, and fittings shall be as per requirement.All metallic parts shall be with corrosion resistant coating and shall be welded strongly using CO₂ welding, conforming to safety regulations. Panels shall be secured with nuts, bolts, and riveting. ISLAND TABLE: The laboratory table shall be provided as knock down type modular ISLAND laboratory tables units of overall size 8000(L) (Length may vary as per actual requirement) × 1500(W) × 900(H) mm × 1550H (two-tier). It shall be constructed in modular segments of 1400(L) × 1500(W) × 900(H) mm each for ease of manufacture, handling, and installation. Four standard SS304 sinks shall be installed, each fitted with a 3-way SS 304 faucet of Premium make. Stainless steel reagent racks shall be provided across the entire table length in centre except the sink areas, with dimensions 300D × 700H. These racks shall also be of modular design with two horizontal stainless steel shelves, cutouts for switches and sockets, provision for electrical outlets, and accommodation for granite pieces.All base storage cabinets shall be of the design “1 Drawer + 2 Shutters” made of 0.8 mm thick Powder Coated CRCA. Each storage box without granite shall be 600W × 570D × 713H, supported on 100 mm legs and shall include rubber shoes at the bottom of each leg to prevent floor damage and ensure stability. The upper top shall be of 18-19 mm thick black granite, with all joints sealed using silicon sealant. The cabinet bodies shall be of over-closing design, fabricated entirely on CNC machines to ensure precision. The storage bodies shall be neatly jointed with accurately matched sides to avoid gaps. Shutters shall be made of 0.8 mm thick Powder Coated CRCA with handles, and drawers shall run on Soft close sliding channels (35-50kg)..Reagent shelves shall be made of polished finish SS, provided with electrical switches, sockets, and cutouts as required. The worktops shall be of 18-19 mm thick black granite, flushed with sink units and taps. Installation shall include all utility service outlets, accessory fittings, plumbing, electrical switches, and fittings shall be as per requirement.All metallic parts shall be with corrosion resistant coating and shall be welded strongly using CO₂ welding, conforming to safety regulations. Panels shall be secured with nuts, bolts, and riveting. (iv) LAB STOOLSupply and installation of Lab Stool Seat Revolving Stool with Backrest Overall Dimension: 410W ±10 x 410D ±10 x 820H ±10 mm,Seat of chair is made of 12mm thick hot pressed Plywood pasted with High Density PU foam & Leatherette upholstery, Back is made of 12mm thick hot pressed Plywood pasted with PU foam D -40 kg/m3 , H-20 Seat and back fixed through metal powder coated Spine covered with plastic cover, Seat Size: 400W ±10 x 400D ±10 x 75Thick. ±5 mm, Back Size: 450W ±10 x 240H ±10 x 50Thick. ±5mm, Ground to seat height-440-560mm, Mechanism:- Machanism Design With Features Of Revolving At 360 Degree. Machanism Provided Upright Position Locking, Seating Height Can Be Adjusted With a Pneumatic Gas Lift,Gaslift: Lift -Used gaslift of 90 mm size of Class- IV grade with plastic bellow cover, Chair Base & Wheels: Chair Base Made of polished finished SS 202 grade stainless steel, base consists of polished finished SS 202 grade stainless steel 5 prongs with 560±5 mm pitch circle diameter, Polished finished SS 202 grade stainless steel circular foot rest as per ref. image, 50mm Dia. Black Nylon - Twin Wheel Pin castor. 2 KITCHEN & DINING (A) DINING TABLEDining Table: Polished finish SS Dinning Table consists of Dinning Top is made up of 1 mm thickness Stainless steel sheet of SS 304 Grade with overall dimension of 1800(L) X 700(D) X 750(H). The table top is reinforced with a 18 mm ply Board on Stainless steel frame of square section 40mmx40mmx1.6mm. Dinning top of stainless steel sheet shall be extended to the sides and a depth upto 40 mm under the table top in all directions including edge rounding, grinding and finishing etc. all complete. The Table top shall finish in such a manner to avoid any sharp edges. The table will be supported by four hollow legs made from SS 304 grade stainless steel. The hollow legs shall be of square type of size 50mmx50mmx1.6mm. These legs shall be securely welded or mechanically fastened to the underside of the tabletop frame. For additional structural stability, stainless steel cross supports shall be provided between the legs as shown in figure with 40mmx40mmx1.6mm SS square section. The table shall include rubber shoes at the bottom of each leg to prevent floor damage and ensure stability. The design shall prioritize user safety with no sharp corners or edges. The table must be structurally sound and capable of supporting a uniformly distributed load of at least 250 kg. All materials used must conform to relevant IS standards, and the finished product should be free from burrs, dents, or deformities. SS 304. (B) DINING BENCHDining Bench: The Bench shall be of size 1800 mm in length, 300 mm in depth, and 450 mm in height, suitable for use in residential schools. The bench top shall be made of 18 mm thick HDHMR + Laminated , finished with a 1 mm thick decorative laminate on the top surface, and a balancing laminate backing on the underside to ensure dimensional stability. All exposed edges shall be sealed with PVC edge banding or machine-finished to prevent splinters and enhance durability. The plywood shall be scratch-resistant, water-resistant, and easy to clean, with a light woodgrain or equivalent finish as approved. The supporting frame shall be fabricated frame of square hollow section 40mmx40mmx1.6mm SS 304 grade stainless steel in polished finish. These legs shall be securely welded to the underside of the benchtop frame. The bench shall include rubber shoes at the bottom of each leg to prevent floor damage and ensure stability. The design shall prioritize user safety with no sharp corners or edges. The bench must be structurally sound and capable of supporting a uniformly distributed load of at least 250 kg. All materials used must conform to relevant IS standards, and the finished product should be free from burrs, dents, or deformities. 3 BOYS AND GIRLS DORMITORIES BEDs/ Partition wallIn Dormitory Hall, RCC Bed (900mmX1800mm) with 18mm HDHMR with with 1mm Matt-finish laminate on top of bed shall be provided. RCC partition wall cladding must be using 8mm Plywood covered with 2mm Matt-finish laminate all around corners and no sharp edges. With all fixtures fasteners adhesives etc all inclusive required for fixing. 4 STAFF QUARTERS (A) ROOMS WARDROBE Fabricating, Supplying, Fixing & Placing In position Wardrobe of size 900 (L) x 1800 (H) x 600 (D). The unit comprises of Wardrobe including, a single drawer, Hanger Rod,in Pre laminated HDHMR board of 18mm thickness for carcase and shutters with 12mm thick back panel and drawer bottom. 2mm Edge banding matching the laminiate selected, Including all necessary fixing arrangement, glues, screws, magnetic catchers, handles, flush handles for drawer in wardrobe, hinges, telescopic sliding channel for drawers, as required. Colour may vary as per approval of engineer-in-charge. (B) MODULAR KITCHEN (i) Fabricating, Supplying, Installation, Fixing & Placing in position the entire Modular Kitchen Under Storage Counter (Height 850mm) as per drawing.The unit comprises of Cabinets, shutters, profile Handles, Accessories, Hardware, Glass etc,. Basic structural framing with 18mm thick prelam HDHMR for shutters and carcase and its divisions and 12 HDHMR for back panel and bottom panel of drawers as mentioned in the drawing, edge banding to match the color of selected laminate, including all necessary fixing arrangement, nails, glues, screws, magnetic catchers, handles, Handles of required lengths as per the width of the Drawer, Shutter, Cabinet, Soft Closing hinges and Soft Closing innotech sliding channel for drawers along with railings if required, fixing the furniture to the wall or to the floor as required. All works like fixing the unit to the floor or wall, laminates of specified thickness complete,other required hardware are included. Black Granite countertop, machine-cut, mirror polished, and neatly grouted, installed true to level with proper support structure.All framework intermittently for support and strength, All details to be followed as per the drawings and design provided and any addition required in detail should be incorporated in the shop drawing to ensure complete functionality and durability as intended. All HDHMR/Plywood and board will be both sides laminte. Nothing extra will be paid. All cooridnation works based on civil dimensions, integration of various appliances for the purpose of electrical wiring are to be considered in this item. Appliances like Chimney,sink etc to be paid seperatly. Natural stone counter top stone will be provided by the client and fixing will be done by the client appointed agency. However coordination will be the responsibility of this contractor.+B69(ii) Fabricating, Supplying, Installation, Fixing & Placing in position the entire Modular Kitchen Over Head Storage Counter (Height 600mm) as per drawing. The unit comprises of Cabinets, shutters, profile Handles, Accessories, Hardware, Glass etc,. Basic structural framing with 18mm thick prelam HDHMR for shutters and carcase and its divisions and 12 HDHMR for back panel and bottom panel of drawers as mentioned in the drawing, edge banding to match the color of selected laminate, including all necessary fixing arrangement, nails, glues, screws, magnetic catchers, handles, Handles of required lengths as per the width of the Drawer, Shutter, Cabinet, Soft Closing hinges and Soft Closing innotech sliding channel for drawers along with railings if required, fixing the furniture to the wall or to the floor as required. All works like fixing the unit to the floor or wall, laminates of specified thickness complete,other required hardware are included. All framework intermittently for support and strength, All details to be followed as per the drawings and design provided and any addition required in detail should be incorporated in the shop drawing to ensure complete functionality and durability as intended. All plywood and board will be both sides laminte. Nothing extra will be paid. All cooridnation works based on civil dimensions, integration of various appliances for the purpose of electrical wiring are to be considered in this item. Appliances like Chimney,sink etc to be paid seperatly. Natural stone counter top stone will be provided by the client and fixing will be done by the client appointed agency. However coordination will be the responsibility of this contractor. Colour may vary as per approval of Engineer-in-charge. GUEST HOUSE i) King Size BED: The king-size bed is constructed without a storage box and features robust materials for lasting durability. The frame, including the side panels and footboard, is made from 18 mm thick pre-laminated engineered wood with a melamine finish, offering a clean, wood-textured look. The mattress base is fabricated using 18 mm BWP-grade plywood, fully edge-banded to prevent warping and moisture damage. The overall dimensions of the bed are 2040 mm in length, 1980 mm in width, and 300 mm in height to the base, providing ample support for a standard king-size mattress (1980 mm × 1830 mm).The headboard stands 800 mm tall and is divided into two sections. The lower portion is made of laminated board, while the upper section includes a cushioned panel with 50 mm PU foam, upholstered in stitched premium leatherette for added comfort and aesthetics. The entire unit features a light oak melamine finish to match. The bed is supplied in knock-down condition with all necessary hardware, including cam locks, screws, dowels, and angle brackets. Assembly is straightforward with reinforced metal corners for added strength. ii) Side Table:The side table is constructed using high-grade plywood and finished in a light oak melamine laminate for a clean, natural appearance. It features a compact form with overall dimensions of 400 mm (width) × 400 mm (depth) × 490 mm (height). The unit has two lockable equally sized drawers, both equipped with soft-close telescopic channels for smooth, quiet operation.The design incorporates a handle-less front with a finger-pull recess at the top edge of each drawer for a sleek and minimalist look. Both drawers are lockable, enhancing functionality and security for personal storage. The surface is fully laminated for protection against wear and easy maintenance. iii) 06 Seater Dining Table— The dining table shall be of solid sheesham wood (kiln-dried and chemically treated) with overall dimensions 1500 mm × 900 mm × 760 mm and a tabletop thickness of approx. 25 mm; the apron shall be 25 mm thick and legs shall be 80–100 mm square in section, all joined using mortise-and-tenon or equivalent reinforced joinery. A clear tempered (toughened) glass top shall be provided to cover the wooden top: 10 mm clear toughened glass is recommended for this size, with machine-polished edges (flat polish or small bevel) and corner radii for safety. The glass shall be supplied cut to size for a nominal 2–3 mm reveal from the top edge of the apron (or as directed), packed separately and fitted on site. Glass fixing shall use non-marking neoprene/rubber support pads (minimum 6 pads per table) and anti-slip silicone adhesive/dots to hold the glass in place without damaging the wood; stainless steel decorative clamps may be provided where a visible fixing is required but should not bear the primary load. Finish of the wood shall be a low-sheen natural polish or clear lacquer; table shall be supplied knock-down with all required fasteners and instructions for on-site assembly and final glass placement. The glass top protects the wood from scratches, heat and spills, gives a sleek aesthetic, and makes cleaning easier (wipe with standard glass cleaner while avoiding aggressive solvents on adjacent wood finish).Chairs 06 Nos — Each chair shall be of solid sheesham wood, finished to match the table’s low-sheen polish, with a slatted backrest and straight legs. Seat height shall be 450 mm from finished floor level. Seats shall be cushioned with medium-density foam and fully upholstered in durable synthetic leather (leatherette) in a neutral tone; foam shall be supported on a plywood board beneath the cushion. Chair dimensions (seat width/depth/backrest height) and leg sections shall be robust to match the table and shall be supplied knock-down with necessary assembly hardware. Upholstery shall be stain-resistant and maintainable (spot cleanable); wood and upholstery care instructions shall be provided with each unit. (iv) SOFA SET (a)SOFA FOYER ONE SEATER Size in mm - 880(L) X 755(D) X 750(H) Seat Wooden Structure Uphostered With Leatherite & HD Foam 32 Softy. SS Chrome . Sofa S57 Max. Height 750mm . The rounded Armrests Provided Sleek And Stylish Look With The Pillowed Back . Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25mm Round Spiral Spring . Legs Round Pipe Chrome Plated Legs . Understructure Made of Base Frame Strongly Jointed Wooden Plywood Parts . 3 Seater Sofa Seat Height From Ground 460mm .3 Seater Sofa 2020W x 760D x 750H , 2 Seater Sofa 1450W x 760D x 750H . Seat Height From Ground 460mm & 1 Seater Sofa 880W x 760D x 750H . 100mm High Legs. (b)SOFA FOYER TWO SEATER Size in mm - 1460(L) X 755(D) X 750(H)Seat Wooden Structure Uphostered With Leatherite & HD Foam 32 Softy. SS Chrome . Sofa S57 Max. Height 750mm . The rounded Armrests Provided Sleek And Stylish Look With The Pillowed Back . Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25mm Round Spiral Spring . Legs Round Pipe Chrome Plated Legs . Understructure Made of Base Frame Strongly Jointed Wooden Plywood Parts . 3 Seater Sofa Seat Height From Ground 460mm .3 Seater Sofa 2020W x 760D x 750H , 2 Seater Sofa 1450W x 760D x 750H . Seat Height From Ground 460mm & 1 Seater Sofa 880W x 760D x 750H . 100mm High Legs. (c) Coffee Table The coffee table measures 900 mm (W) × 600 mm (D) × 450 mm (H) and features a 10 mm thick clear tempered glass top and shelf supported on a Stainless Steel 202 frame made of 40×40 mm square tubes with a mirror-polished finish. All joints are argon-welded, ground, and buffed for a seamless look. The lower glass shelf for additional storage, and rubber pads or level adjusters are provided at the base for stability and floor protection. The table combines modern design, durability, and elegant finish, making it ideal for offices and reception areas.
Contract Date: Ref. Documents Contract Value : ₹ 2.51 Lakh
Government Departments No of Bidders 6
Jharkhand View Result →
23.
Defence #9677744 AOC
Repair/Replacement Of Roofing, Ceiling, Brick Work And Other Connected B/R Works For Technical Area At 8Fbsu, Af And Periodical Services To All Mes Est And Power House, Pump House At 8Fbsu, Af Awantipur; 1 Dismantling boarding, any description fixed in any position with nails or screws. 2 Dismantling oftimber scantlings exc 40 sq. cmin section as in fillets, rails, posts, rafters, purlins, etc all as specified and directed by Engineer in charge. 3 Dismantling oftimber scantlings less than 40 sq. cmin section as in fillets, rails, posts, rafters, purlins, etc all as specified and directed by Engineer in charge 4 Dismantling ofstructure steel work including doors, gates but excluding framed truss etc,complete all as specified and directed by engineer-in-charge. 5 Framed work as in false ceiling, doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering.Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410 A quality grade, all as specified and directed. 6 Prelaminated particle board 12mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in false ceiling fixedto Mild steel/ timber frame complete all as specified 7 M&L for 12 mm Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having Phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish 8 S&F Anodised aluminium snap grid frame work for false ceiling for size of grid 605 x 605 mmincluding hangers 6 mm diaGI (up to 1200 mm long) adjusting level fixed to roof complete all as specified 9 Material and labour for ceiling withnon Asbestos cement designerbuilding boards ( size of board 600 x 600mm ) of4 mm thickfixed with aluminium anodised snap grid frame work for false ceilingall as per manufacture instruction all as specified. 10 M&L 2nd class soft wood clean sawn timber framed and fixed in frame work for ceiling . 11 S&F 6mm thick of plywood, grade BWP, type BB fixed with screw to mild steel frame work and No of ply 5 as in ceiling all as specified and directed by Engineer-in-Charge. 12 Preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and providing a coat of synthetic enamel paint over one coat of pink primer all as specified & directed. 13 Dismantling of plain or corrugated steel sheeting ofany gauge, thickness etc in roof coverings/cladding/eave etccomplete all as specified. 14 S&F galvanised corrugated mild steel sheeting, with two corrugation side lap fixed with L type or J type or cranked hooked bolts with washers in roof, 0.63mm thick, grade-O quality, with 120 grms/sqm zinc coating and grade B Class 8complete all as specified and directed by Engineer-in-Charge. 15 S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering /cladding to wall fixed with self taping screw as specified complete all as specified and directed by Engineer-in-Charge. 16 Refixing Plain or corrugated steel sheeting, any gauge, thickness, roof coverings with two corrugation side lapfixed with L type or J type or cranked hooked bolts and dome type bitumen washers complete all as specified and directed by Engineer-in-Charge. 17 S&F Galvanised plain mild steel sheeting 0.63mm thickness fixed with l or J type or cranked hook bolts with washers, in roofs as in ridge etc all as specified and directed. 18 Demolition ofwall/ ceiling sheets (fibre, pulp, insulation etc) or insulation sheets/slabs/blankets any thickness including cover fillets complete all as specified 19 S&F 2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in roof wall etc. 20 S&F 1.00mm thick Plain, galvanised, mild steel sheeting, in eave board & straight flashings (length & girth as fixed) with welded and shouldered joint to be provided all as specified and directed by Engr in charge. 21 Preparation of new painted surfaces of steel or iron work or CGI/PGI sheeting in walls or roofing over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint in camouflaging (Disruptive) pattern (Green, Grey & Brown colour) complete all as specified and directed. (Make: Berger/Johnson/Nerolac/Asian/Shalimar) 22 Preparation of old painted surfaces of steel or iron work or CGI/PGI sheeting in walls or roofing over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint in camouflaging (Disruptive) pattern (Green, Grey & Brown colour) complete all as specified and directed. (Make: Berger/Johnson/Nerolac/Asian/Shalimar) 23 M&L for 2nd class soft wood Plain fillets.square, rectangular or triangular in section, n exc 3 sqcm in section clean sawn, secured with nails or brads in eave board all as specified and directed by Engr-in-Charge. 24 Preparation of new wooden surfaces of any description not otherwise described, not exceeding 10 cm width or girth and providing a coat of synthetic enamel paint over one coat of pink primer all as specified & directed. 25 Dismantling brickwork built in cement mortar including all quoins, arches, pillars etc all as specified & directed by Engineer-in-Charge. 26 Cutting holes exc. half brick but not exc one brick in brick walls built in CM or cement lime mortar & stone walls built in lime mortar for inserting holdfasts & making good dismantled portion in CM(1:3) or PCC(1:2:4) Type B-1 as required 27 S&F Roof trusses (framed), trussed, posts, struts, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, base plate and gusset plates etc confirming to Fe 410-W (Gde-E- 250) quality-A complete all as specified and directed. 28 Brick work with old size bricks straight or curved on plan exceeding 6 metre mean radiusbuilt in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified. 29 Providing, cement concrete 1 : 2 : 4 type B-1 using 20 mm graded aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, hold fasts, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed 30 Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc, and removing same from the Site(s), complete all as specified and as directed. 31 Rendering cement plaster 15mm thick in cement mortar 1:6 (1 cement : 6 coarse sand) on other than fair faces of brick wall or on stone masonry surfaces, surface finished even and smooth without using extra cement, all as specified. 32 M&L for preparation of new plastered surface on walls and applying two coats of oil bound distemper over a coat of primer on plastered surfaces complete all as specified and directed by Engineer-in-charge. 33 Preparing newplastered or un-plastered surfaces of walls and applyingtwo coats Acrylic exterior emulsion paint in camouflaging (Disruptive) pattern (Green, Grey & Brown colour) over a coat of acrylic primer complete all as specified and directed. (Make: Asian/Berger/Nerolac/ICI/Shalimar/Garware/Johnson) 34 Preparation of new or previously untreated surfaces of Steel surfaces of any description not otherwise described over 10cm width or girth and applying a coat of synthetic enamel paint over a coat of red oxide complete all as specified 35 Preparingold decoratedplastered or un-plastered surfaces of wallsby scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, mass and efflorescence salts and trading oil and greasy spotsetc and applying one coat of white wash on wall surfaces including preparation of surfaces by filling cracks/holes with white putty, complete all as specified and directed. 36 Description all as per serial item No. 1 above, but one coat on ceiling, complete all as specified and directed. 37 M&L for applying 3mm thick wall care putty in two layer on prepared surface complete all as specified and directed. 38 M&L for Complete removal of existing treatment of old decorated plastered or un plastered wall surfaces of wall and applying two coats of Acrylic washable distemper over a coat of primer , complete all as specified and directed. 39 M&L for Preparation of old decoratedplastered or un-plastered surfaces of wallsby scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, mass and efflorescence salts and trading oil and greasy spotsetc and applying one coat of Acrylic washable distemper on wall surfaces including preparation of surfaces by filling cracks/holes with white putty, complete all as specified and directed. 40 Description all as per serial item No. 5 above, but one coat on ceiling, complete all as specified and directed. 41 M&L for Preparation of old painted wood or wooden based surfaces of any description not otherwise described over 10cm width or girth,and applying one coat of synthetic enamel paint complete all as specified and directed. 42 M&L for Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc., capacity of tank exc 250 & n exc 500 litres including writing date of cleaning on the tank with suitable synthetic enamel paint etc complete all as specified and directed. 43 M&L forCleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc., capacity of tank exc 500 & n exc 1000 litres including writing date of cleaning on the tank with suitable synthetic enamel paint etc complete all as specified and directed. 44 M&L for Preparation of old painted steel or iron surfaces of any description not otherwise described over 10cm width or girth,and applying one coat of synthetic enamel paint complete all as specified and directed. 45 Taking down cement or cement plaster on brick or stone work etc includingracking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. 46 M&L for Rendering 10 mm thick in cement mortar 1:6on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed. 47 M&L for Preparation of newlyplastered or un-plastered surfaces of wallsand applying two coats of Acrylic washable distemper over 3 mm thick wall care putty in two layers and make surface smooth finishing , complete all as specified and directed. 48 Note :- An amount of Rs. 27,250.00 on account of credit schedule for Sch A Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.
Contract Date: Nov 26, 2025 Contract Value : ₹ 14.60 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Jammu And Kashmir View Result →
24.
Defence #9638909 AOC
Tender For Repair/ Maintenance To Various Types Of Fans At Afa Hyderabad; 1 M&L for opening stator assy of Ceiling Fan any Sweep, cleaning of serviceable parts, replacement of unserviceable parts as decided/ordered, greasing of moveable parts, taking out burnt coil, cleaning the segments/portion and complete re-winding of the same with super enamelled copper wire of same gauge, quality and same weight with & including paper insulation, varnishing and heating & re-assembling the same after repair/rewinding, checking all electrical connections incl testing complete all as specified and as directed to the entire satisfaction of the Engr-In-Charge for OMQ/SMQ Area. 2 Description all as per Item No-01 here in above but for OTM Area. 3 Description all as per Item No-01 here in above but for Technical Area.NOTE for Item above : 1) Unserviceable spare parts viz Ball Bearing, Bush, Capacitor, Canopy, Rubber Reel etc. shall be measured and paid separately under respective items as mentioned here-in-after. 2) Anything missed out in the technical specifications but technically required for efficient working of the C/Fan is deemed to be included in the unit quoted rates. 3) Cost of taking down/disconnection of Ceiling Fans & dismantling of Fan blades is deemed to be included in the unit quoted rates. 4) Quoted rate is deemed to be inclusive of 1 Year Guarantee for re-winding & in the event of any unserviceability during the said period, same shall be re-done to the entire satisfaction of the Engr-In-Charge without any extra cost to the Govt. 4 M&L for opening of Ceiling Fan of any sweep for servicing, overhauling, oiling & greasing and re-assembling the same after checking all electrical connections incl testing complete all as specified and as directed to the entire satisfaction of the Engr-In-Charge. 5 S&F Ball bearing of size 6201 (with 8 balls) perfectly suitable for Ceiling fans/Exhaust fans of any sweep/make complete all as specified and as directed to the entire satisfaction of the Engr-In-Charge. MAKE : NBC/SKF/TATA 6 S&F Capacitor 2.5 MFD, 440 Volts AC, 50Hz perfectly suitable for Ceiling Fan of any sweep/make incl testing complete all as specified and as directed to the entire satisfaction of the Engr-In-Charge. MAKE : UNIVERSAL/USHA /ARISTO/Havells 7 S&F Capacitor 3.15 MFD, 440 Volts AC, 50Hz perfectly suitable for Ceiling Fan of any sweep/make incl testing complete all as specified and as directed to the entire satisfaction of the Engr-In-Charge. MAKE : UNIVERSAL/USHA /ARISTO/Havells 8 S&F Down Rod as approved perfectly suitable for Ceiling Fan of any sweep/make incl testing complete all as specified and as directed to the entire satisfaction of the Engr-In-Charge. MAKE : As per Sample. 9 S&F Down Rod clamps, U type with Rubber Reel of suitable size/as ordered perfectly suitable for Ceiling Fan of any sweep/make with & including necessary Mild Steel nuts, bolts, washers etc. incl testing complete all as specified and as directed to the entire satisfaction of the Engr-In-Charge. MAKE : As per Sample. 10 S&F PVC Fan Canopy (as approved) perfectly suitable for Ceiling Fan of any sweep/make complete all as specified and as directed to the entire satisfaction of the Engr-In-Charge. MAKE : As per Sample. 11 S&F Fan Blades (Set of 3) perfectly suitable for Ceiling Fan 1200/1400 mm Sweep of Make & colour as required/ordered at Site incl testing complete all as specified and as directed to the entire satisfaction of the Engr-In-Charge. MAKE : As per Sample. 12 M&L for painting of Ceiling Fans of any sweep/make with Duco Paint of approved colour by spraying incl filling cavities with filler, one coat after cleaning all dust/dirt/Oil etc. with & incl writing of SM/MES No complete all as specified and as directed to the entire satisfaction of the Engr-In-Charge. 13 M&L for opening stator assy of Exhaust Fan 230/300 mm Sweep, cleaning of serviceable parts, replacement of unserviceable parts as decided/ordered, greasing of moveable parts, taking out burnt coil, cleaning the segments/portion and complete re-winding of the same with super enamelled copper wire of same gauge, quality and same weight with & including paper insulation, varnishing and heating & re-assembling the same after repair/rewinding, checking all electrical connections incl testing complete all as specified and as directed to the entire satisfaction of the Engr-In-Charge for OMQ/SMQ Area. 14 Description all as per Item above here in above but for Exhaust Fan of size 380/400 mm sweep. 15 Description all as per Item above here in above but for Exhaust Fan of size 450 mm sweep. 16 M&L for opening of Exhaust Fan of any sweep for servicing, overhauling, oiling & greasing and re-assembling the same after checking all electrical connections incl testing complete all as specified and as directed to the entire satisfaction of the Engr-In-Charge. 17 S&F Ball bearing of suitable size/type perfectly suitable for Exhaust fans of any sweep/make complete all as specified and as directed to the entire satisfaction of the Engr-In-Charge. MAKE : NBC/SKF/TATA 18 S&F Capacitor 4.0 MFD, 440 Volts AC, 50Hz perfectly suitable for Exhaust Fan of any sweep/make incl testing complete all as specified and as directed to the entire satisfaction of the Engr-In-Charge. MAKE : UNIVERSAL/USHA /ARISTO/Havells 19 M&L for painting of Exhaust Fans of any sweep/make with Duco Paint of approved colour by spraying incl filling cavities with filler, one coat after cleaning all dust/dirt/Oil etc. with & incl writing of SM/MES No complete all as specified and as directed to the entire satisfaction of the Engr-In-Charge. 20 S&F Ceiling Fans complete with blades, down rods, electronic regulator (compatible for BLDC Fans) & accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, 5 Star rated with BLDC mtor complete all as specified & as directed. Make : HAVELLS/BAJAJ/USHA/KHAITAN 21 Supply, install, testing & commissioning of Exhaust fan, copper wound, PVC body with automatic back shutter louvers 150 mm sweep, 1350 RPM or more, Air Delivery not less than 280 CMH, single phase, 240 Volts, AC, 50 Hz, Noise level < 34 dB with 2 Yrs Guarantee and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DX White or techno-commercially equivalent in Usha/Bajaj/Khaitan. 22 Supply, install, testing & commissioning of Exhaust fan, copper wound, PVC body with automatic back shutter louvers 200 mm sweep, 1350 RPM or more, Air Delivery not less than 520 CMH, single phase, 240 Volts, AC, 50 Hz, Noise level < 42 dB with 2 Yrs Guarantee and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventilator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DX White or techno-commercially equivalent in Usha/Bajaj/Khaitan. 23 Supply, install, testing & commissioning of Exhaust fan, copper wound, PVC body with automatic back shutter louvers 250 mm sweep, 1280 RPM or more, Air Delivery not less than 860 CMH, single phase, 240 Volts, AC, 50 Hz, Noise level < 44 dB with 2 Yrs Guarantee and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventilator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DX White or techno-commercially equivalent in Usha/Bajaj/Khaitan. 24 Supply, install, commissioning & testing of Exhaust fan, metal body with automatic back shutter louvers 230 mm sweep, 1400 RPM or more, Air Delivery not less than 860 CMH, single phase, 240 Volts, AC, 50 Hz Noise level < 44 dB with 2 Yrs Guarantee and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventilator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DB or techno-commercially equivalent in Usha/Bajaj/Khaitan. 25 Supply, install, commissioning & testing of Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1850 CMH, single phase, 240 Volts, AC, 50 Hz Noise level < 44 dB with 2 Yrs Guarantee and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DB or techno-commercially equivalent in Usha/Bajaj/Khaitan. Note for Item Nos above :- (i) The cost of making hole in walls/other surfaces (if any) & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates. (ii) The cost of taking down & transportation of old unsv Exfan to MES storeyard is deemed to be included in unit quoted rates. (iii) Installed Exhaust Fans Warranty card duly signed by the user should be submitted to the Engr-in-Charge. 26 Supply, install, commissioning & testing of Wall Fan High Speed, PVC body suitable for wall mounting, 300 mm sweep, 2350 RPM or more, Air Delivery not less than 70 CMH, adjustable upward & downward tilt, with safety feature of motor protection through thermal overload protection device, oscillation degree 60, single phase, 240 Volts, AC, 50 Hz with & including 2 Years Guarantee and connecting up complete including provision of cable 3 core of suitable size from ceiling rose to fan in flexible hose & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Model : Swing Off-White (High Speed) or techno-commercially equivalent in Usha/Bajaj/Khaitan. of Make Havells or techno-commercially equivalent in Usha/Bajaj/Khaitan. Note : (i) Installed Wall Fans Warranty card duly signed by the user should be submitted to the Engr-in-Charge (ii) The cost of making good the disturbed surface & fixing arrangements required is deemed to be included in the quoted rate.(iii) The cost of transportation of old unsv Wall Fan to MES storeyard is deemed to be included in unit quoted rates. 27 Supply, Fix, Installing and Testing Vertical type Storage electric water heater (Geyser) of 25 Ltrs capacity, Tank made of ultra thick super cold rolled steel plates with high density PUF insulation, 2 KW, 230 V, Single Phase, 50 Hz, AC, BEE 5 Star rated, suitable for a pressure rating of 0.8 MPa Bar with 7 years warranty on inner tank, 4 years on heating element & 2 year comprehensive warranty with & including connected accessories and 2 Nos anchor fasteners of size as per manufacturer instructions grouting and fixing and making good the disturbed surface complete and connecting electrical and water supply connection using steel braided hose 2 Nos complete all as specified and directed by the Engr-in-Charge. Model - Monza DX, Cat No: GHWAMGTWH025 of Make Havells or techno-commercially equivalent in Racold/ Bajaj. Note : (i) Installed Geysers warrenty card duly signed by the user should be submitted to the Engr-in-Charge (ii) The cost of making good the disturbed surface & fixing arrangements required is deemed to be included in the quoted rate.(iii) The cost of transportation of old unsv geyser to MES storeyard is deemed to be included in unit quoted rates. 28 S&F Electronic stepped type (5 Steps) Fan Regulator, Socket type suitable for Ceiling Fan 1200/1400mm sweepincl testing complete all as specified and as directed to the entire satisfaction of Engr-In-Charge. Make-Anchor/Havells/Polycab.. Make-Anchor/Havells/Polycab. 29 S&F Electronic stepped type (5 Steps) Fan Regulator, Socket type perfectly suitable for BLDC Ceiling Fan 1200/1400mm sweep incl testing complete all as specified and as directed to the entire satisfaction of Engr-In-Charge. Make-Anchor/Havells/Polycab. 30 S&F Flexible multistranded copper conductor 3 core, 0.5 Sqmm complete all as specified and as directed. 31 Supply, install, commissioning & testing of PCB board perfectly suitable for BLDC Ceiling Fans any sweep complete all as specified and as directed to the entire satisfaction of Engr-In-Charge. Make : As per Existing. 32 Supply and fixing of Stator Coil suitable for any BLDC fans as orderedfor 1200 mm Sweep fans, complete all as specified and as directed. Make : As per Existing.
Contract Date: Jan 03, 2026 Contract Value : ₹ 18.91 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Telangana View Result →
25.
Housing Urban and Rular Development #9635723 Technical Bid
Tender For Supply Of Furniture And Internal Fitouts For Permanent Campus At Jnv Kondagaon (Chhattisgarh) , School Building , (I) Classroom Desk Large Size Supply & Installation Big Desk (For Two Persons)-The Overall Dimensions Of Desk Will Be 1066Mm * 930Mm * Height 760Mm, Complete As Per Specifications Enclosed And Direction Of Engineer-In- Charge Having The Table Top Shall Be Made Up Of 18.0 Mm Thick Plywood Is 303 Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish). Table Top Dimensions Shall Be W 900 Mm X D 380 Mm. Edge Towards Bench Shall Be Post Formed With Round Edge. The Remaining Three Edges Must Be Sealed With 2Mmthick Pvc Edge Banding Tape. Edge Band Must Be Trimmed On Edges And Corners. The Desk Shall Be Have Low Chemical Emission Of Vocs (Voltage Organic Compounds) And Carcinogens, Contributing To A Healthier Room Environment. Seat And Back Rest Shall Be Made Of 18Mm Thick Plywood Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish) Except Back Restoration Back Rest Shall Be Have Both Sides Colour Lamination. Technical Details Of Seat And Back Rest Are Mentioned Below:Seating Bench Dimensions Shall L 930 Mm X W 300 Mm. Front Side Shall Be Rounded With Post Forming. Remaining Three Edges Shall Sealed With 2Mm Thick Pvc Edge Banding Tape. Back Rest Dimensions Shall L 930 X H 200 Mm Upper Side Shall Be Rounded With Post Forming Remaining Three Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding Tape. Desk Shelve Shall Be Made Of Prime Quality 0.8Mm Thick Crca Sheet Of H150mmxd300mm And Side Stiffeners Of Crca Tube Size 19Mmx19mmx1mmthick. One Vertical Support (Partition) Of Square Tube Size 25Mm Square X1.2Mm Thick Must Be Provided At Centre Of Tray . Upper Modesty Made Of Prime Quality 0.8Mm Thick Crca Sheet Powder Coated Should Be Embossed With Dimples In Round Shape, Height Will Be 150Mm, There Should Be Perforated Lower Modesty Made Of Prime Quality 0.8 Mm Thick Crca Sheet Of Size H150mmxd21mm With Square Perforation, Crca Tube Of Size 19X19x1mm Thick To Be Inserted For Full Length At Bottom Of Jali . Bag Hook Should Be Provide On Both Side Of Piller Made Of Minimum 4Mm Dia Rod Side Frame Structure:- Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25Mmx50mmx1.2Mm Thick Crca Tube , Seat And Back Side Frame Structure Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25.4Mm Diameter X 1.6Mm Thick Erw-1Pipe , There Will Be 8No. Horizontal Supports Are 25Mmx25mmx1.2Mm Thick Crca Pipes. . Bottom Rectangular Tube 50X25x 1.2Mm Thick Should Be Closed With Ppcp Cap Bothside Sand Pipe Dia. 25.4X1.6Mm Thick Should Be Closed With Metal (Backside) And Other Side (Undertheseat) Ppcp Cap, Complete As Per Engineer Incharge Desk Should Be In Semi Knock Down Form With The Help 16 Connecting Pipes ; 8 Pipes On Each Side : Connecting Pipe Size Will Be 20X20x1.2Mm .All Metal Pieces Shall Be Welded Properly Strongly And Conformity With Regulations With Co2 Welding Shall Be Used , Crca Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form A Layer Of Base Coating Of (Iron Phosphating) (0.4 - 0.8) Gm/M² , Automatic Spray Coating Shall Be Applied To Be Followed By A Drying Process In A Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 Tank Treatment With Minimum 45-50 Micron Powder Coating. , (Ii) Classroom Desk Medium Size Supply & Installation Medium Desk (For Two Persons)-The Overall Dimensions Of Desk Will Be 900Mm W± 5 X 890Mm D± 5 X 688/420Mm H± 5 , Complete As Per Specifications Enclosed And Direction Of Engineer-In- Charge Having The Table Top Shall Be Made Up Of 18.0 Mm Thick Plywood Is 303 Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish). Table Top Dimensions Shall Be W 870 Mm X D 380 Mm. Edge Towards Bench Shall Be Post Formed With Round Edge. The Remaining Three Edges Must Be Sealed With 2Mmthick Pvc Edge Banding Tape. Edge Band Must Be Trimmed On Edges And Corners.The Desk Shall Be Have Low Chemical Emission Of Vocs (Voltage Organic Compounds) And Carcinogens, Contributing To A Healthier Room Environment. Seat And Back Rest Shall Be Made Of 18Mm Thick Plywood Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish) Except Back Restoration Back Rest Shall Be Have Both Sides Colour Lamination. Technical Details Of Seat And Back Rest Are Mentioned Below:Seating Bench Dimensions Shall L 890 Mm X W 300 Mm. Front Side Shall Be Rounded With Post Forming. Remaining Three Edges Shall Sealed With 2Mm Thick Pvc Edge Banding Tape. Back Rest Dimensions Shall L 890 X H 200 Mm Upper Side Shall Be Rounded With Post Forming Remaining Three Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding Tape. Desk Shelve Shall Be Made Of Prime Quality 0.8Mm Thick Crca Sheet Of H150mmxd300mm And Side Stiffeners Of Ss Crca Tube Size 19Mmx19mmx1mmthick. One Vertical Support (Partition) Of Square Tube Size 25Mm Square X1.2Mm Thick Must Be Provided At Centre Of Tray . Upper Moedsty Made Of Prime Quality 0.8Mm Thick Crca Sheet Powder Coated Should Be Embossed With Dimples In Round Shape, Height Will Be 150Mm, There Should Be Perforated Lower Modesty Made Of Prime Quality 0.8 Mm Thick Crca Sheet Of Size H150mmxd21mm With Square Perforation, Crcat Ube Of Size 19X19x1mm Thick To Be Inserted For Full Length At Bottom Of Jali . Bag Hook Should Be Provide On Both Side Of Piller Made Of Minimum 4Mm Dia Rod Side Frame Structure:- Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25Mmx50mmx1.2Mm Thick Crca Tube , Seat And Back Side Frame Structure Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25.4Mm Diameter X 1.6Mm Thick Erw-1Pipe , There Will Be 8No. Horizontal Supports Are 25Mmx25mmx1.2Mm Thick Crca Pipes. . Bottom Rectangular Tube 50X25x 1.2Mm Thick Should Be Closed With Ppcp Cap Bothside Sand Pipe Dia. 25.4X1.6Mm Thick Should Be Closed With Metal (Backside) And Other Side (Undertheseat) Ppcp Cap, Complete As Per Engineer Incharge Desk Should Be In Semi Knock Down Form With The Help 16 Connecting Pipes ; 8 Pipes On Each Side : Connecting Pipe Size Will Be 20X20x1.2Mm .All Metal Pieces Shall Be Welded Properly Strongly And Conformity With Regulations With Co2 Welding Shall Be Used , Crca Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form A Layer Of Base Coating Of (Iron Phosphating) (0.4 - 0.8) Gm/M² , Automatic Spray Coating Shall Be Applied To Be Followed By A Drying Process In A Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 Tank Treatment With Minimum 45-50 Micron Powder Coating. , (Iii)Teacher Table :Supplying And Installation Of Knock Down Type Office Table Made Of Pre-Laminated Mdf Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Top Of Size 1200 X 600 X 750 Mm. Worktop Shall Be Rounded In All Four Corners And Should Have An Overhung Of 50Mm Alongwith One Drawer Unit Made Of 0.5Mm Thick Crca Steel Sheet. The Table Top Shall Be Supported Over Legs Consists Of 4 Ss Legs With Connected Beams . Pipe Sixe 25X25x1.2 Mm Thick . Ss 304 Grade. , (Iv)Teachers Chair, Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat , Used Pu Moulded Foam On Seat Of D-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10 X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Made Ss Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss Polished Finish , (V) Teacher Board [Excluding Cost Of Interactive Flat-Panel Display (Ifpd)] Technical Specification For Smart Board With Double-Track Sliding System For Green And White Boards Fitted In An Anodised Aluminium Frame With Concealed Cable Management And Provision For Mounting Of Digital Screen: Supply, Installation, Testing, Commissioning (Sitc) Of An Integrated Digital Teaching-Learning Solution Comprising: (A) Anodised Aluminium Frame, Double Track Sliding System For White & Green Board And Provision For Mounting Of Digital Screen With Concealed Cable Management, (B) Vitrified Magnetic Ceramic-Steel Green Board And White Board Panels. • Dimensions And Configuration: Total Width Of The Setup Is ~12 Feet And Height ~4.0 Feet From The Board Surface (Excluding The Width Of Aluminium Frame). • Material: Providing And Fixing Anodised Aluminium (Alloy 6063-T6) Framed Sliding System For Smart Board With Minimum 2.0 Mm Thick Extruded Sections, Anodised To Aa15 Grade As P Is 1868, Mounted On A Heavy-Duty Top-Hung Aluminium Track (Min. 2.5 Mm Thick) With Sealed Ball-Bearing Nylon/Pu Rollers (Load Capacity Not Less Than 120 Kg Per Panel), Concealed Bottom Guide, Epdm Gaskets, Ss-304 Fasteners, Pelmet/Valance Cover, And Soft End-Stops/Soft-Close Mechanism, Including All Brackets, Fixings, Alignment, Cable Provisions, Commissioning, And Making Good Complete As Per Drawings And Engineer-In-Charge. • Design: One Slot To Fix Ifpd, Other Slot For Green & White Boards Sliding On Double Track System With Locking Facility On Sliding Frame To Keep The Ifpd Display Safe. • Top & Bottom Rails: Tracks Shall Be Aligned And Reinforced To Ensure Boards Move Easily And Without Wobble. • Back Side: The Backside Of The Smart Board, To Concealed The Wall Surface, Provided & Fixed With 18 Mm Thick Hdhmr Board Laminated (White Coloured Matte Finish) With 0.8 Mm, Edg Sealed With 1 Mm Pvc Edge Banding, Fixed To The Anodised Aluminium Frame With Concealed Screws/Rivets, With Ventilation Slots As Required, And Shall Be Moisture, Termite And Borer Resistant. •?Load Capacity: Safe To Hold Ifpd + White & Green Boards With =1.5× Safety Factor. •?Cable Management: Built-In Channels For Power, Lan, Hdmi, Usb. •?Safety: Rounded Edges, Tamper-Resistant Covers, Concealed Fixing. •?Finish: Durable, Corrosion-Resistant Coating Suitable For Indoor Use. •?Additional Requirements: (A) All Boards And The Structure Must Be Securely Fixed To The Wall With Appropriate Fasteners. (B) Provision For Cable Management Must Be Included For The Ifpd (I.E., Concealed Conduit/Path For Power And Data Cables). , (C) The Unit Must Be Free From Sharp Edges, Splinters, Or Any Protruding Parts That Could Cause Injury. (D) Installation Height Should Ensure Comfortable Writing Access For Average Adult And Student Height (Typically Bottom Edge ~2.5 To 3 Feet From The Floor). (B) Vitrified Magnetic Ceramic-Steel Green Board And White Board Panels: • Function: Boards Shall Slide Horizontally On A Top And Bottom Aluminium/Steel Channel Track To Fully Cover Or Reveal The Ifp As Needed. • Material: Vitrified Ceramic-Steel, Magnetic, Double-Coated. • Sliding Boards: Quantity: 1 No. Green Board & 1 No. White Board. • Green Board Surface: Matte, Chalk-Friendly, Stain/Scratch Resistant. • White Board Surface: Glossy Surface, Dry-Erase Marker Friendly, Ghost-Free, Easy Clean. • Size: ~6 Feet (W) × 4 Feet (H) (Each Board) With Thickness 8Mm. • Frame: Anodised Aluminium, Rounded Edges, Concealed Fasteners.Note - Dimensions Mentioned Are Indicative. Actual May Vary As Per Site Requirements , Table Supplying And Installation Of Site Knock Down Type Office Table As Per Approved Design And Directrion Of Engineer-In-Charge. Work Top - Work Top Shall Be Made 25Mm Thick Pre-Laminated Mdf Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Confirming To Is 12406:2003 With Post Forming On Front, Back And Machine Pressed Pvc Egde Banding 2Mm Thick Glued With Industrial Adhesive And Diffused With Board Monolithically On Other Two Sides. Table Top Shall Have 75Mm Overhung On Front And 25Mm Overhung On Sides. Understructure- C-Type Leg Shall Be Made Of Tubular Section Of 50Mm X 50Mm X 1.6Mm (Wall Thickness) Thick Vertical Member And 40Mm X40mm X1.6Mm (Wall Thickness) Horizontal M.S. Pipe Confirming Is-Grade 4932 Shall Be Finished With Epoxy Polyster Powder Coated Dft 50-60 Micron. The Legs Shall Be Fitted To The Ground With M8 Screw Leveler With The Height Adjustment Up To 15Mm. The Cross Members Shall Be Mounted By End Brackets Made Of 3Mm Thick Crca Steel Sheet Confirming Is 513: 2008 And Finished With Epoxy Polyster Powder Coated Dft 50-60 Micron Confirming Is 13871:1993. Wire Management - Electrical Wires Shall Be Carried From Horizintal/ Vertical Duct Made Of 0.7Mm Crca Steel Sheet Confirming To Is 513:2008. The Switch Plate Or Grommet Depending Upon Requirement Shall Also Be Provided For Electrical/Lan Connection On Table Top. Modesty Panel -Modesty Panel Of Height 450Mm Shall Be Made Of 1.5Mm Thick Crca Sheet Sheet Confirming To Is 513: 2008 And Shall Be Finised With Epoxy Polyster Powder Coated Dft 50-60Micron. Storage Body- Storage Top Shall Also Be Made Of 25Mm Thick Pre-Lam Mdf Board Confirming To Is 12406:2003 With Post Forming On Two Sides And Machine Pressed Pvc Egde Banding 2 Mm Thick Glued With Industrial Adhesive And Diffused With Board Monolithically On Other Two Sides. The Body Of Storage Units Shall Be Made Of 0.8Mm Thick Crca Steel Sheet And Skirting Shall Be Of 1.2Mm Thick Crca Steel Sheet Confirming To Is 513: 2008 Finished With Epoxy Powder Coated Of Dft 50-60 Micron Confirming Is 13871:1993. Internal Shelves Shall Be Also Made Up Of 0.8Mm Crca Steel Sheet Confirming To Is 513: 2008 And Shall Be Mounted With The Metal Shelf Support Pin Made Of 2Mm Thick Crca Steel Sheet With Nickel Or Chrome Plating. M10 Screw Leveler Is Given With Height Adjustment Up To 12Mm To 15Mm. , (I) Principal Room Table Table Of Size 1800Mm (W) X 900Mm (D) X 750Mm (H) With Side Storage Of Size 900Mm (W) X 450Mm (W) X 750Mm (H) And Back Storage 1800Mm (W) X 450Mm (D) X 750Mm (H) As Per Specifications Above , (Ii) Principal Room Chair High Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1210H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat,Used Pu Moulded Foam On Seat Of D-45 Kg/M3 , Back Of Chair Is Made Of Injection Moulded Pp Material Structure Upholstered With Mesh Fabric , Adjustable Lumber Support Upholstered With Fabric , Adjustable Headrest On Back Upholstered With Mesh Fabric ,Seat Size:- 470W ±10 X 460D ±10 X 70Thick. ±5 Mm , Back Size: 500W ±10 X 780H ±10,Mechanism:- The Synchro Tilt Mechanism ,Used Gaslift Of 90 Mm Size Of Class-Iv Grade,Armrest:- Pu Padded Adjustable Armrest Fixed With Seat ,Chair Base & Wheels: Ss Polished Finish Plated Base Consists Of 5 Prongs With 640±5 Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , (Iii) Principal Room Visitor Chair, Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat , Used Pu Moulded Foam On Seat Of D-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10 X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Made Ss Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss Polished Finish , (Iv) Vice-Principal Room Table Table Of Size 1650Mm (W) X 900Mm (D) X 750Mm (H) With Side Storage Of Size 900Mm (W) X 450Mm (W) X 750Mm (H) And Back Storage 1650 Mm (W) X 450Mm (D) X 750Mm (H) As Per Specifications Above , (V) Vice-Principal Room Chair High Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1210H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat,Used Pu Moulded Foam On Seat Of D-45 Kg/M3 , Back Of Chair Is Made Of Injection Moulded Pp Material Structure Upholstered With Mesh Fabric , Adjustable Lumber Support Upholstered With Fabric , Adjustable Headrest On Back Upholstered With Mesh Fabric ,Seat Size:- 470W ±10 X 460D ±10 X 70Thick. ±5 Mm , Back Size: 500W ±10 X 780H ±10,Mechanism:- The Synchro Tilt Mechanism ,Used Gaslift Of 90 Mm Size Of Class-Iv Grade,Armrest:- Pu Padded Adjustable Armrest Fixed With Seat ,Chair Base & Wheels: Ss Polished Finish Base Consists Of 5 Prongs With 640±5 Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , (Vi) Vice Principal Visitor Chair: Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat , Used Pu Moulded Foam On Seat Of D-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10 X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Made Ss Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss Polished Finish , (I)Sofa Foyer One Seater Size In Mm - 880(L) X 755(D) X 750(H) Seat Wooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height 750Mm . The Rounded Armrests Provided Sleek And Stylish Look With The Pillowed Back . Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring . Legs Round Pipe Chrome Plated Legs . Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts . 3 Seater Sofa Seat Height From Ground 460Mm .3 Seater Sofa 2020W X 760D X 750H , 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm & 1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs . Note - Dimensions Mentioned Are Indicative. Actual May Vary As Per Site Requirements , (Ii)Sofa Foyer Two Seater Size In Mm - 1460(L) X 755(D) X 750(H) Seat Wooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height 750Mm . The Rounded Armrests Provided Sleek And Stylish Look With The Pillowed Back . Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring . Legs Round Pipe Chrome Plated Legs . Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts . 3 Seater Sofa Seat Height From Ground 460Mm .3 Seater Sofa 2020W X 760D X 750H , 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm & 1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs . Note - Dimensions Mentioned Are Indicative. Actual May Vary As Per Site Requirements , (Iii)Sofa Foyer Three Seater Size In Mm - 1930(L) X 755(D) X 750(H) Seat Wooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height 750Mm . The Rounded Armrests Provided Sleek And Stylish Look With The Pillowed Back . Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring . Legs Round Pipe Chrome Plated Legs . Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts . 3 Seater Sofa Seat Height From Ground 460Mm .3 Seater Sofa 2020W X 760D X 750H , 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm & 1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs . Note - Dimensions Mentioned Are Indicative. Actual May Vary As Per Site Requirements , (Iv) Coffee Table The Coffee Table Measures 900 Mm (W) × 600 Mm (D) × 450 Mm (H) And Features A 10 Mm Thick Clear Tempered Glass Top And Shelf Supported On A Stainless Steel 304 Frame Made Of 40×40 Mm Square Tubes With A Mirror-Polished Finish. All Joints Are Argon-Welded, Ground, And Buffed For A Seamless Look. The Lower Glass Shelf For Additional Storage, And Rubber Pads Or Level Adjusters Are Provided At The Base For Stability And Floor Protection. The Table Combines Modern Design, Durability, And Elegant Finish, Making It Ideal For Offices And Reception Areas. , (I) Table (Seating Capacity As Per Actual Requirement) Supplying And Installation Of A Modular, Knock-Down Center Island Table Sized Approximately 3600 Mm In Length (Adjustable To Actual Requirements) By 1350 Mm In Width And 750 Mm In Height, Constructed From High-Quality 18 Mm Thick Commercial Grade Plywood Or Bwr (Boiling Water Resistant) Grade Plywood With Decorative Lamination On Visible Faces And Balanced Lamination Beneath For Enhanced Strength And Moisture Resistance. All Edges Are Sealed With 2 Mm Thick Machine-Pressed Pvc Edge Banding Bonded With Industrial Adhesive To Ensure A Seamless, Monolithic Appearance. The Gable Ends Are Fabricated Of The Same 18 Mm Thick Commercial Grade Plywood With Decorative Lamination On Both Sides And Matching Edge Banding For Consistent Aesthetics And Superior Durability. The Table Shall Have An Underbody Vertical Support Panel Running Continuously Along Its Length To Enhance Stability And Strength. The Understructure Uses Precision-Cut, Laminated Plywood Panels Assembled With Knock-Down Fittings For Ease Of Installation And Future Reconfiguration, Ensuring Superior Load-Bearing Capacity And Long-Term Durability. A Concealed Wire Management System Beneath The Worktop Integrates Pre-Laminated Plywood Cable Trays Or High-Quality Plastic Trays Fixed With Durable Brackets, Complete With Provisions For Switch Plates And Grommets To Facilitate Safe, Organized Routing Of Electrical And Data Cables. All Surfaces Are Finished For Scratch And Stain Resistance With Anti- Fungal And Moisture-Resistant Properties, And Installation Will Follow Best Woodworking Practices, With Final Dimensions And Seating Capacity Determined By The Actual Site Layout Note - Dimensions Mentioned Are Indicative. Actual May Vary As Per Site Requirements , (Ii) Work Space With In-Built Lockable Overhead Storage Space For Staffroom (As Per Actual Requirement) Supplying And Installation Of Site Knock-Down Type Modular Wall-Mounted Workspace Unit Of Approximate Size 900W X 600D X 750H Mm (For One Staff), Including Working Counter And Lockable Overhead Storage Cabinet Of 900W X 450D X 650H Mm. The Structure Shall Be Made Of 18 Mm Thick Bwp Grade Plywood With Decorative Laminate On External Surfaces And Balancing Laminate On Inner Faces Conforming To Is:303/Is:12406. All Exposed Edges Shall Be Sealed With 2 Mm Pvc Edge Banding. The Worktop Shall Be 25 Mm Thick Pre-Laminated Mdf Board With Post-Formed Front Edge And Machine-Pressed Pvc Edge Banding, Securely Fixed To The Wall Using Concealed Ms Cleats And Brackets. The Overhead Cabinet Shall Be Fitted With Soft-Close Concealed Hinges, Ss Handles, And Magnetic Catchers Of Approved Make, With One Adjustable Shelf And Modular Connectors For Alignment And Expansion To Adjoining Units. Each Workspace Shall Include Provision For Electrical Connectivity With 6A/16A Modular Sockets (As Per Requirement) Positioned At Approximately 450 Mm Above Finished Floor Level For Easy Access. The Worktop Shall Have A Circular Cable Hole (50-60 Mm Diameter) With Grommet For Laptop And Equipment Wiring. All Wiring, Sockets, And Conduits Shall Be Concealed Neatly Within The Table Body, Routed Through Internal Pvc Raceways To Maintain A Clean, Clutter-Free Appearance. Junction Boxes And Ducts Shall Be Integrated To Provide Safe, Organized Cable Management Without Visible Wiring. The Entire Unit Shall Be Wall-Mounted Using Heavy-Duty Ms Brackets Or Suitable Fasteners Based On Wall Type, Finished Neatly With Matching Silicone Sealant At All Joints. All Fittings And Hardware, Including Soft-Close Hinges And Handles, Shall Be Of Reputed Make. The Unit Shall Be Termite-Resistant, Moisture-Resistant, Easy To Maintain, And Made From Isi-Marked Prime Quality Boards. The Overall Layout And Detailing Shall Match The Approved Reference Image, With Actual Dimensions Finalized As Per Site Requirements And Direction Of The Engineer-In-Charge. Note - Dimensions Mentioned Are Indicative. Actual May Vary As Per Site Requirements , (Iii) Chair Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat , Used Pu Moulded Foam On Seat Of D-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10 X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Made Ss Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss Polished Finish , (Iv) Personal Locker Unit For Staffroom And One Each For Principal And Vice Principal Room Supplying And Installation Of Metal Lockers With Cam Lock One Unit Consiting Of 380Mm (W) X 450Mm (D) X 1800 Mm (H) With 4 Lockers. Body-Lh And Rh Side And Back Panel Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008. Shelf Hanging Bracket Is Welded On Both The Side Panel By Spot Welding. Shelf Hanging Bracket Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008. Front Frame, Top And Bottom Part Made Up 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008 And Horizontal Part Is Made Up 0.8 Mm Thick Crca Steel Sheet Confirming To Is 513:2008. On A Front Frame Horizontally Provision Is Given At A Common Distance To Hold Shutter Bracket. Lockers Top Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming Is 513:2008 Which Is Having Standard Dimension 375 X378mm. Shelf Is Also Made Up Of 0.8 Mm Crca Steel Sheet Confirming To Is 513:2008. Shutter- Is Made Up On 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008. All The Shutter Are Hung On Shutter Pin And Shutter Bracket, Louvers Are Given In Shutter For Air Flow. Pvc Flush Handle And Name Plate Is Used For Handling And For Name Plate Tagging. Standard Locking Arrangment Is Used For Locking Each Shutter. The Bodies Including Shelves Are Given Anti-Rust Surface Treatment & Are Powder Coated With Epoxy Polyester Powder Coating Of Dft 50- 60 Micron Confirimg To Is 13871:1993. , (I) Supply And Installation Of Glass-Door Storage Of Size 915 Mm (W) X 482Mm (D) X 1980Mm (H). It Should Have Shelf Thickness Of 0.8Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) With Clear Glass Of 4.0 Mm Thick And All Other Components Shall Have A Thickness Of 0.8Mm. These Components Shall Be Made Of Crca Steel Sheet ‘D Grade High Yield Strength As Per Is 513:2008 The Glass Door Storwel Shall Have A Ss Handle And A Two-Way Locking Mechanism With Shooting Bolt. It Should Have A Height-Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base.All Metal Components Would Be Epoxy Polyster Powder Coated Dft 50-60 Micron Confirimg To Is 13871:1993 Note - Dimensions Mentioned Are Indicative. Actual May Vary As Per Site Requirements , (Ii) Wall Mounted Built In Open Book Shelf : Overall Size 900L (Length May Vary As Per Actual Requirement) X300dx2100hmm,Top Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Banding ,Side Panel Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending , Skirting Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending ,Back Panel Made Up Of 18Mm Thick Postlam Plywood , One Number Of Drawer And Bottom Storage Cabinets As Per Ref. Image ,Shelf Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending, All Wooden Panels Fix Joints With Minifix Dowels & Other Fitting Equipment , All Wooden Panels Prime Quality Board With Isi Marked. Complete Structure Design Should Be As Per Reference Image Only. Note - Dimensions Mentioned Are Indicative. Actual May Vary As Per Site Requirements , (Iii) Table As Per Ref Image:Supply And Installation Of Library Table In Sizes Of 3600Mm (L) (Length May Vary As Per Actual Requirement) X 900Mm (W) X 750Mm (H) Consisting Of Follwing Specification:- Work Top - Work Top Shall Be Made Of 25Mm Thick Pre-Laminated Partical Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Confirming To Is 12823: 1990, Alongwith 2 Mm Thick Machine Pressed Pvc Edge Banding Glued With Industrial Adhesive And Monolithically Diffused With Board On Exposed Edges. Understructure Supporting Frame Shall Consists Of 03 Metal C-Legs (Two At Either Ends And One In Middle Of Table) And Joined By Two Numbers Horizontal Connector Made Of Tubular Section 40Mm X 40Mm X 1.6Mm (Wall Thickness) Confirming To Is 4923:1997. The Entire Metal Frame Shall Be Finised With Epoxy Polyster Powder Coated Dft 50-60 Micron. C-Typed Metal Legs Shall Be Kept 150 Mm Inside From From End Of Table. Legs Shall Be Fitted To The Ground With M8 Screw Leveler With The Height Adjustment Up To 12Mm To 15Mm. Note - Dimensions Mentioned Are Indicative. Actual May Vary As Per Site Requirements , (Iv) Chair, Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat , Used Pu Moulded Foam On Seat Of D-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10 X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Made Ss Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss Polished Finish , (I) Computer Work Station Supplying And Installation Of Knock Down Type Dual Computer Work Station Of Unit Size 1500Mm (L) X 600M (W) X 750Mm (H) For Two Students Work Top- Work Top Shall Be Made 25Mm Thick Prelam Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Confirming To Is 12823: 1990 With 2Mm Thick Machine Pressed Pvc Edge Banding Glued With Industrial Adhesive And Monolithically Diffused With Board On All Sides. Understructure Supporting Frame Consist Of Plbp Gable Ends Of 18Mm Wire Management-The Vertical /Electrical Duct & Horizontal Cable Tray ( Wire Carriers) Are Made Of Crca Steel Sheet & Fixed To The Understructure Below Worktop With Specially Designed Brackets. Provision For Fixing Switch Plates Are Privided In The Cable Tray For Easy Access Through Wire Mangaer Or Pvc Grommet. , (Ii) Computer Chair For Student Medium Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1010H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat ,Used Pu Moulded Foam On Seat Of D-45 Kg/M3 , Back Of Chair Is Made Of Injection Moulded Pp Material Structure Combination Of Upholstered With Mesh Fabric , Seat And Back Connected Through Metal Powder Coated Plate Having Adjustable Lumber Support Upholstered With Fabric , Seat Size:- 490W ±10 X 450D ±10 X 70Thick. ±5 Mm , Back Size: 525W ±10 X640h ±10,Mechanism:- The Synchro Tilt Mechanism ,Using Gaslift Of 90 Mm Size Of Class 3 Grade,Armrest: Pu Padded Adjustable Armrest,Chair Base & Wheels: Revolving Pedestal Ss Polsihed Finish Base Consists Of 5 Prongs With 640±5 Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , (I) Supply And Installation Of Glass-Door Storage Of Size 915 Mm (W) X 482Mm (D) X 1980Mm (H). It Should Have Shelf Thickness Of 0.8Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) With Clear Glass Of 4.0 Mm Thick And All Other Components Shall Have A Thickness Of 0.8Mm. These Components Shall Be Made Of Crca Steel Sheet ‘D Grade High Yield Strength As Per Is 513:2008 The Glass Door Storwel Shall Have A Ss Handle And A Two-Way Locking Mechanism With Shooting Bolt. It Should Have A Height-Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base.All Metal Components Would Be Epoxy Polyster Powder Coated Dft 50-60 Micron Confirimg To Is 13871:1993 Note - Dimensions Mentioned Are Indicative. Actual May Vary As Per Site Requirements , Along The Wall Table:: Supply And Installation Of Along-The-Wall Knock Down Type Modular Laboratory Tables Of Size 1400 Mm(L) (Length May Vary As Per Actual Requirement) × 750 Mm (W) × 860Mm(H) Mm × 900Mm H . Each Unit Shall Have A Storage Box Of Size 1400W × 750D × 850H. The Worktops Will Include A Powder-Coated Bus Running Their Full Length, Above The Counter, With An Internal Conduit For All Wiring. Modular Switch Plates And 02 Nos Of 220V/16A Switch Socket (With Individual Circuit Protection) Will Be Cnc-Mounted Every 1 M (Or Per Site Layout). All Conduits And Components Shall Comply With Applicable Laboratory Safety And Performance Standards. Dust-Proof, Removable Access Covers To Permit Maintenance And Future Upgrades, And Outlets To Be Ergonomically Positioned For Seated And Standing Use. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design 1 Drawer + 2 Shutters Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Legs And Shall Include Rubber Shoes At The Bottom Of Each Leg To Prevent Floor Damage And Ensure Stability. The Upper Top Shall Be Of 19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Crca With Handles, And Drawers Shall Run On Innotech Technology Sliding Channels. The Worktops Shall Be Of 19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. Note: All Dimensions Mentioned Are Indicative And May Vary As Per Actual Site Requirements , Island Table:The Laboratory Table Shall Be Provided As Knock Down Type Modular Island Laboratory Tables Units Of Overall Size 8000(L) (Length May Vary As Per Actual Requirement) × 1500(W) × 860(H) Mm × 900H . It Shall Be Constructed In Modular Segments Of 1400(L) × 1500(W) × 860(H) Mm Each For Ease Of Manufacture, Handling, And Installation. Storage Boxes Shall Be Of Size 1400W × 1500D × 850H. The Worktops Will Include A Powder-Coated Bus Running Their Full Length, Above The Counter, With An Internal Conduit For All Wiring. Modular Switch Plates And 04 Nos (02 Facing Each Side) Of 220V/16A Switch Socket (With Individual Circuit Protection) Will Be Cnc-Mounted Every 1 M (Or Per Site Layout). All Conduits And Components Shall Comply With Applicable Laboratory Safety And Performance Standards. Dust-Proof, Removable Access Covers To Permit Maintenance And Future Upgrades, And Outlets To Be Ergonomically Positioned For Seated And Standing Use. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design 1 Drawer + 2 Shutters Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Legs And Shall Include Rubber Shoes At The Bottom Of Each Leg To Prevent Floor Damage And Ensure Stability. The Upper Top Shall Be Of 19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Crca With Handles, And Drawers Shall Run On Innotech Technology Sliding Channels. The Worktops Shall Be Of 19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. Note: All Dimensions Mentioned Are Indicative And May Vary As Per Actual Site Requirements , Along The Wall Table: Supply And Installation Of Along-The-Wall Knock Down Type Modular Laboratory Tables Of Size 1400(L) (Length May Vary As Per Actual Requirement) × 750(W) × 860(H) Mm × 1550H (Two-Tier). Each Unit Shall Have A Storage Box Of Size 1400W × 750D × 850H. Four Standard Ceramic Sinks Shall Be Installed, Each Fitted With A 3-Way Faucet Of Premier Make. Reagent Racks Made Completely Out Of Stainless Steel Shall Be Provided To Cover The Entire Table Length(Along The Wall) Except The Sink Area. These Racks Shall Be 300D × 700H And Of Complete Modular Design, Consisting Of Two Horizontal Storage Shelves Made Of Stainless Steel With Suitable Cutouts For Electrical Switches And Sockets. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design 1 Drawer + 2 Shutters Made Of 0.8 Mm Thick Stainless Steel Sheet Polished Finish. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Ss Legs And Shall Include Rubber Shoes At The Bottom Of Each Leg To Prevent Floor Damage And Ensure Stability. The Upper Top Shall Be Of 19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Stainless Steel Sheet With Handles, And Drawers Shall Run On Innotech Technology Sliding Channels. Reagent Shelves Shall Be Made Of A Ss, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. Note: All Dimensions Mentioned Are Indicative And May Vary As Per Actual Site Requirements , Island Table: The Laboratory Table Shall Be Provided As Knock Down Type Modular Island Laboratory Tables Units Of Overall Size 8000(L) (Length May Vary As Per Actual Requirement) × 1500(W) × 860(H) Mm × 1550H (Two-Tier). It Shall Be Constructed In Modular Segments Of 1600(L) × 1500(W) × 860(H) Mm Each For Ease Of Manufacture, Handling, And Installation. Storage Boxes Shall Be Of Size 1400W × 1500D × 850H. Four Standard Ceramic Sinks Of Size Shall Be Installed, Each Fitted With A 3-Way Faucet Of Premier Make. Stainless Steel Reagent Racks Shall Be Provided Across The Entire Table Length In Centre Except The Sink Areas, With Dimensions 300D × 700H. These Racks Shall Also Be Of Modular Design With Two Horizontal Stainless Steel Shelves, Cutouts For Switches And Sockets, Provision For Electrical Outlets, And Accommodation For Granite Pieces. All Base Storage Cabinets Shall Be Of The Design 1 Drawer + 2 Shutters Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Ss Legs And Shall Include Rubber Shoes At The Bottom Of Each Leg To Prevent Floor Damage And Ensure Stability. The Upper Top Shall Be Of 19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Powder Coated Crca With Handles, And Drawers Shall Run On Innotech Technology Sliding Channels. Reagent Shelves Shall Be Made Of A Polished Finish Ss, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. Note: All Dimensions Mentioned Are Indicative And May Vary As Per Actual Site Requirements , Along The Wall Table: Supply And Installation Of Along-The-Wall Knock Down Type Modular Laboratory Tables Of Size 1400(L) (Length May Vary As Per Actual Requirement) × 750(W) × 860(H) Mm × 1550H (Two-Tier). Each Unit Shall Have A Storage Box Of Size 1400W × 750D × 850H. Four Standard Ceramic Sinks Shall Be Installed, Each Fitted With A 3-Way Faucet Of Premier Make. Reagent Racks Made Completely Out Of Stainless Steel Shall Be Provided To Cover The Entire Table Length(Along The Wall) Except The Sink Area. These Racks Shall Be 300D × 700H And Of Complete Modular Design, Consisting Of Two Horizontal Storage Shelves Made Of Stainless Steel With Suitable Cutouts For Electrical Switches And Sockets. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design 1 Drawer + 2 Shutters Made Of 0.8 Mm Thick Stainless Steel Sheet Polished Finish. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Ss Legs And Shall Include Rubber Shoes At The Bottom Of Each Leg To Prevent Floor Damage And Ensure Stability. The Upper Top Shall Be Of 19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Stainless Steel Sheet With Handles, And Drawers Shall Run On Innotech Technology Sliding Channels. Reagent Shelves Shall Be Made Of A Ss, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. Note: All Dimensions Mentioned Are Indicative And May Vary As Per Actual Site Requirements , Island Table: The Laboratory Table Shall Be Provided As Knock Down Type Modular Island Laboratory Tables Units Of Overall Size 8000(L) (Length May Vary As Per Actual Requirement) × 1500(W) × 860(H) Mm × 1550H (Two-Tier). It Shall Be Constructed In Modular Segments Of 1400(L) × 1500(W) × 860(H) Mm Each For Ease Of Manufacture, Handling, And Installation. Storage Boxes Shall Be Of Size 1400W × 1500D × 850H. Four Standard Ceramic Sinks Of Size Shall Be Installed, Each Fitted With A 3-Way Faucet Of Premier Make. Stainless Steel Reagent Racks Shall Be Provided Across The Entire Table Length In Centre Except The Sink Areas, With Dimensions 300D × 700H. These Racks Shall Also Be Of Modular Design With Two Horizontal Stainless Steel Shelves, Cutouts For Switches And Sockets, Provision For Electrical Outlets, And Accommodation For Granite Pieces. All Base Storage Cabinets Shall Be Of The Design 1 Drawer + 2 Shutters Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Legs And Shall Include Rubber Shoes At The Bottom Of Each Leg To Prevent Floor Damage And Ensure Stability. The Upper Top Shall Be Of 19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Crca With Handles, And Drawers Shall Run On Innotech Technology Sliding Channels. Reagent Shelves Shall Be Made Of Polished Finish Ss, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. Note: All Dimensions Mentioned Are Indicative And May Vary As Per Actual Site Requirements , (Iv) Lab Stool Supply And Installation Of Lab Stool Seat Revolving Stool With Backrest Overall Dimension: 410W ±10 X 410D ±10 X 820H ±10 Mm,Seat Of Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With High Density Pu Foam & Leatherette Upholstery, Back Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Foam D -40 Kg/M3 , H-20 Seat And Back Fixed Through Metal Powder Coated Spine Covered With Plastic Cover, Seat Size: 400W ±10 X 400D ±10 X 75Thick. ±5 Mm, Back Size: 450W ±10 X 240H ±10 X 50Thick. ±5Mm, Ground To Seat Height-440-560Mm, Mechanism:- Machanism Design With Features Of Revolving At 360 Degree. Machanism Provided Upright Position Locking, Seating Height Can Be Adjusted With A Pneumatic Gas Lift,Gaslift: Lift -Used Gaslift Of 90 Mm Size Of Class- Iv Grade With Plastic Bellow Cover, Chair Base & Wheels: Chair Base Made Of Polished Finished Ss 304 Grade Stainless Steel, Base Consists Of Polished Finished Ss 304 Grade Stainless Steel 5 Prongs With 560±5 Mm Pitch Circle Diameter, Polished Finished Ss 304 Grade Stainless Steel Circular Foot Rest As Per Ref. Image, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor. , (A) Dining Table Dining Table: Polished Finish Ss Dinning Table Consists Of Dinning Top Is Made Up Of 1 Mm Thickness Stainless Steel Sheet Of Ss 304 Grade With Overall Dimension Of 1800(L) X 700(D) X 750(H). The Table Top Is Reinforced With A 18 Mm Ply Board On Stainless Steel Frame Of Square Section 40Mmx40mmx1.6Mm. Dinning Top Of Stainless Steel Sheet Shall Be Extended To The Sides And A Depth Upto 40 Mm Under The Table Top In All Directions Including Edge Rounding, Grinding And Finishing Etc. All Complete. The Table Top Shall Finish In Such A Manner To Avoid Any Sharp Edges. The Table Will Be Supported By Four Hollow Legs Made From Ss 304 Grade Stainless Steel. The Hollow Legs Shall Be Of Square Type Of Size 50Mmx50mmx1.6Mm. These Legs Shall Be Securely Welded Or Mechanically Fastened To The Underside Of The Tabletop Frame. For Additional Structural Stability, Stainless Steel Cross Supports Shall Be Provided Between The Legs As Shown In Figure With 40Mmx40mmx1.6Mm Ss Square Section. The Table Shall Include Rubber Shoes At The Bottom Of Each Leg To Prevent Floor Damage And Ensure Stability. The Design Shall Prioritize User Safety With No Sharp Corners Or Edges. The Table Must Be Structurally Sound And Capable Of Supporting A Uniformly Distributed Load Of At Least 250 Kg. All Materials Used Must Conform To Relevant Is Standards, And The Finished Product Should Be Free From Burrs, Dents, Or Deformities. Note - Dimensions Mentioned Are Indicative. Actual May Vary As Per Site Requirements , (B) Dining Bench Dining Bench: The Bench Shall Be Of Size 1800 Mm In Length, 300 Mm In Depth, And 450 Mm In Height, Suitable For Use In Residential Schools. The Bench Top Shall Be Made Of 18 Mm Thick Hdhmr + Laminated , Finished With A 1 Mm Thick Decorative Laminate On The Top Surface, And A Balancing Laminate Backing On The Underside To Ensure Dimensional Stability. All Exposed Edges Shall Be Sealed With Pvc Edge Banding Or Machine-Finished To Prevent Splinters And Enhance Durability. The Plywood Shall Be Scratch-Resistant, Water-Resistant, And Easy To Clean, With A Light Woodgrain Or Equivalent Finish As Approved. The Supporting Frame Shall Be Fabricated Frame Of Square Hollow Section 40Mmx40mmx1.6Mm Ss 304 Grade Stainless Steel In Polished Finish. These Legs Shall Be Securely Welded To The Underside Of The Benchtop Frame. The Bench Shall Include Rubber Shoes At The Bottom Of Each Leg To Prevent Floor Damage And Ensure Stability. The Design Shall Prioritize User Safety With No Sharp Corners Or Edges. The Bench Must Be Structurally Sound And Capable Of Supporting A Uniformly Distributed Load Of At Least 250 Kg. All Materials Used Must Conform To Relevant Is Standards, And The Finished Product Should Be Free From Burrs, Dents, Or Deformities. , Plyboard On Beds/Tables/ Partition Wall In Dormitory Hall, Reinforced Cement Concrete Bed (900Mmx1800mm) With 8Mm Hdhmr With 2Mm Matt-Finish Laminate On Top Of Bed Shall Be Provided. Reinforced Cement Concrete Study Counter (600Mmx1200mm) With Granite On Top. Reinforced Cement Concrete Partition Wall Cladding Must Be Using 8Mm Plywood Covered With 2Mm Matt-Finish Laminate All Around Corners And No Sharp Edges. With All Fixtures Fasteners Adhesives Etc All Inclusive Required For Fixing. , Fabricating, Supplying, Fixing & Placing In Position Wardrobe Of Size 900 (L) X 1800 (H) X 600 (D). The Unit Comprises Of Wardrobe Including, A Single Drawer, Hanger Rod,In Pre Laminated Hdhmr Board Of 18Mm Thickness For Carcase And Shutters With 12Mm Thick Back Panel And Drawer Bottom. 2Mm Edge Banding Matching The Laminiate Selected, Including All Necessary Fixing Arrangement, Glues, Screws, Magnetic Catchers, Handles, Flush Handles For Drawer In Wardrobe, Hinges, Telescopic Sliding Channel For Drawers, As Required. Colour May Vary As Per Approval Of Engineer-In-Charge. Note - Dimensions Mentioned Are Indicative. Actual May Vary As Per Site Requirements , (I) Fabricating, Supplying, Installation, Fixing & Placing In Position The Entire Modular Kitchen Under Storage Counter (Height 850Mm) As Per Drawing. The Unit Comprises Of Cabinets, Shutters, Profile Handles, Accessories, Hardware, Glass Etc,. Basic Structural Framing With 18Mm Thick Hdhmr For Shutters And Carcase And Its Divisions And 12 Hdhmr For Back Panel And Bottom Panel Of Drawers As Mentioned In The Drawing, Edge Banding To Match The Color Of Selected Laminate, Including All Necessary Fixing Arrangement, Nails, Glues, Screws, Magnetic Catchers, Handles, Handles Of Required Lengths As Per The Width Of The Drawer, Shutter, Cabinet, Soft Closing Hinges And Soft Closing Innotech Sliding Channel For Drawers Along With Railings If Required, Fixing The Furniture To The Wall Or To The Floor As Required. All Works Like Fixing The Unit To The Floor Or Wall, Laminates Of Specified Thickness Complete,Other Required Hardware Are Included. Black Granite Countertop, Machine-Cut, Mirror Polished, And Neatly Grouted, Installed True To Level With Proper Support Structure. All Framework Intermittently For Support And Strength, All Details To Be Followed As Per The Drawings And Design Provided And Any Addition Required In Detail Should Be Incorporated In The Shop Drawing To Ensure Complete Functionality And Durability As Intended. All Hdhmr/Plywood And Board Will Be Both Sides Laminte. Inside Laminate Thickness Will Be 0.8 Mm And Will Be Plain Color As Per The Selection, While The Outside Laminate Surface Will Be 1.0 Mm Thick As Per Selected Laminate. Nothing Extra Will Be Paid. All Cooridnation Works Based On Civil Dimensions, Integration Of Various Appliances For The Purpose Of Electrical Wiring Are To Be Considered In This Item. Appliances Like Chimney,Sink Etc To Be Paid Seperatly. Natural Stone Counter Top Stone Will Be Provided By The Client And Fixing Will Be Done By The Client Appointed Agency. However Coordination Will Be The Responsibility Of This Contractor. (Ii) Fabricating, Supplying, Installation, Fixing & Placing In Position The Entire Modular Kitchen Over Head Storage Counter (Height 600Mm) As Per Drawing. The Unit Comprises Of Cabinets, Shutters, Profile Handles, Accessories, Hardware, Glass Etc,. Basic Structural Framing With 18Mm Thick Hdhmr For Shutters And Carcase And Its Divisions And 12 Hdhmr For Back Panel And Bottom Panel Of Drawers As Mentioned In The Drawing, Edge Banding To Match The Color Of Selected Laminate, Including All Necessary Fixing Arrangement, Nails, Glues, Screws, Magnetic Catchers, Handles, Handles Of Required Lengths As Per The Width Of The Drawer, Shutter, Cabinet, Soft Closing Hinges And Soft Closing Innotech Sliding Channel For Drawers Along With Railings If Required, Fixing The Furniture To The Wall Or To The Floor As Required. All Works Like Fixing The Unit To The Floor Or Wall, Laminates Of Specified Thickness Complete,Other Required Hardware Are Included. All Framework Intermittently For Support And Strength, All Details To Be Followed As Per The Drawings And Design Provided And Any Addition Required In Detail Should Be Incorporated In The Shop Drawing To Ensure Complete Functionality And Durability As Intended. All Plywood And Board Will Be Both Sides Laminte. Inside Laminate Thickness Will Be 0.8 Mm And Will Be Plain Color As Per The Selection, While The Outside Laminate Surface Will Be 1.0 Mm Thick As Per Selected Laminate. Nothing Extra Will Be Paid. All Cooridnation Works Based On Civil Dimensions, Integration Of Various Appliances For The Purpose Of Electrical Wiring Are To Be Considered In This Item. Appliances Like Chimney,Sink Etc To Be Paid Seperatly. Natural Stone Counter Top Stone Will Be Provided By The Client And Fixing Will Be Done By The Client Appointed Agency. However Coordination Will Be The Responsibility Of This Contractor. Colour May Vary As Per Approval Of Engineer-In-Charge. Note - Dimensions Mentioned Are Indicative. Actual May Vary As Per Site Requirements , I) King Size Bed: The King-Size Bed Is Constructed Without A Storage Box And Features Robust Materials For Lasting Durability. The Frame, Including The Side Panels And Footboard, Is Made From 18 Mm Thick Pre-Laminated Engineered Wood With A Melamine Finish, Offering A Clean, Wood-Textured Look. The Mattress Base Is Fabricated Using 18 Mm Bwp-Grade Plywood, Fully Edge-Banded To Prevent Warping And Moisture Damage. The Overall Dimensions Of The Bed Are 2040 Mm In Length, 1980 Mm In Width, And 300 Mm In Height To The Base, Providing Ample Support For A Standard King-Size Mattress (1980 Mm × 1830 Mm). The Headboard Stands 800 Mm Tall And Is Divided Into Two Sections. The Lower Portion Is Made Of Laminated Board, While The Upper Section Includes A Cushioned Panel With 50 Mm Pu Foam, Upholstered In Stitched Premium Leatherette For Added Comfort And Aesthetics. The Entire Unit Features A Light Oak Melamine Finish To Match. The Bed Is Supplied In Knock-Down Condition With All Necessary Hardware, Including Cam Locks, Screws, Dowels, And Angle Brackets. Assembly Is Straightforward With Reinforced Metal Corners For Added Strength. , Ii) Side Table:The Side Table Is Constructed Using High-Grade Plywood And Finished In A Light Oak Melamine Laminate For A Clean, Natural Appearance. It Features A Compact Form With Overall Dimensions Of 400 Mm (Width) × 400 Mm (Depth) × 490 Mm (Height). The Unit Has Two Lockable Equally Sized Drawers, Both Equipped With Soft-Close Telescopic Channels For Smooth, Quiet Operation. The Design Incorporates A Handle-Less Front With A Finger-Pull Recess At The Top Edge Of Each Drawer For A Sleek And Minimalist Look. Both Drawers Are Lockable, Enhancing Functionality And Security For Personal Storage. The Surface Is Fully Laminated For Protection Against Wear And Easy Maintenance. , Iii) 06 Seater Dining Table- The Dining Table Shall Be Of Solid Sheesham Wood (Kiln-Dried And Chemically Treated) With Overall Dimensions 1500 Mm × 900 Mm × 760 Mm And A Tabletop Thickness Of Approx. 25 Mm; The Apron Shall Be 25 Mm Thick And Legs Shall Be 80-100 Mm Square In Section, All Joined Using Mortise-And-Tenon Or Equivalent Reinforced Joinery. A Clear Tempered (Toughened) Glass Top Shall Be Provided To Cover The Wooden Top: 10 Mm Clear Toughened Glass Is Recommended For This Size, With Machine-Polished Edges (Flat Polish Or Small Bevel) And Corner Radii For Safety. The Glass Shall Be Supplied Cut To Size For A Nominal 2-3 Mm Reveal From The Top Edge Of The Apron (Or As Directed), Packed Separately And Fitted On Site. Glass Fixing Shall Use Non-Marking Neoprene/Rubber Support Pads (Minimum 6 Pads Per Table) And Anti-Slip Silicone Adhesive/Dots To Hold The Glass In Place Without Damaging The Wood; Stainless Steel Decorative Clamps May Be Provided Where A Visible Fixing Is Required But Should Not Bear The Primary Load. Finish Of The Wood Shall Be A Low-Sheen Natural Polish Or Clear Lacquer; Table Shall Be Supplied Knock-Down With All Required Fasteners And Instructions For On-Site Assembly And Final Glass Placement. The Glass Top Protects The Wood From Scratches, Heat And Spills, Gives A Sleek Aesthetic, And Makes Cleaning Easier (Wipe With Standard Glass Cleaner While Avoiding Aggressive Solvents On Adjacent Wood Finish). Chairs 06 Nos - Each Chair Shall Be Of Solid Sheesham Wood, Finished To Match The Tables Low-Sheen Polish, With A Slatted Backrest And Straight Legs. Seat Height Shall Be 450 Mm From Finished Floor Level. Seats Shall Be Cushioned With Medium-Density Foam And Fully Upholstered In Durable Synthetic Leather (Leatherette) In A Neutral Tone; Foam Shall Be Supported On A Plywood Board Beneath The Cushion. Chair Dimensions (Seat Width/Depth/Backrest Height) And Leg Sections Shall Be Robust To Match The Table And Shall Be Supplied Knock-Down With Necessary Assembly Hardware. Upholstery Shall Be Stain-Resistant And Maintainable (Spot Cleanable); Wood And Upholstery Care Instructions Shall Be Provided With Each Unit. , (A)Sofa Foyer One Seater Size In Mm - 880(L) X 755(D) X 750(H) Seat Wooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height 750Mm . The Rounded Armrests Provided Sleek And Stylish Look With The Pillowed Back . Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring . Legs Round Pipe Chrome Plated Legs . Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts . 3 Seater Sofa Seat Height From Ground 460Mm .3 Seater Sofa 2020W X 760D X 750H , 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm & 1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (B)Sofa Foyer Two Seater Size In Mm - 1460(L) X 755(D) X 750(H) Seat Wooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height 750Mm . The Rounded Armrests Provided Sleek And Stylish Look With The Pillowed Back . Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring . Legs Round Pipe Chrome Plated Legs . Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts . 3 Seater Sofa Seat Height From Ground 460Mm .3 Seater Sofa 2020W X 760D X 750H , 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm & 1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (C) Coffee Table The Coffee Table Measures 900 Mm (W) × 600 Mm (D) × 450 Mm (H) And Features A 10 Mm Thick Clear Tempered Glass Top And Shelf Supported On A Stainless Steel 202 Frame Made Of 40×40 Mm Square Tubes With A Mirror-Polished Finish. All Joints Are Argon-Welded, Ground, And Buffed For A Seamless Look. The Lower Glass Shelf For Additional Storage, And Rubber Pads Or Level Adjusters Are Provided At The Base For Stability And Floor Protection. The Table Combines Modern Design, Durability, And Elegant Finish, Making It Ideal For Offices And Reception Areas.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Chhattisgarh View Result →
26.
Defence #9605508 AOC
Tender For Special Repair To Bldg No Bj/8, Bj/10 And Bh/1 At Albert Ekka Enclave Under Ge Panagarh; 2 Taking downcement plaster ofany description from brick wallsurfaces etc including racking out joints and hacking for key, scrubbing down with water etc., complete all as specified and directed. 3 M&L Rendering 10 mm thick cement plaster in Cement Mortar 1:6 on other than fair faces of brick/concrete work surfaces finished even and smooth (without using extra lime or cement) including taking down old unserviceable cement plaster, complete all as specified and directed. 4 M&L Rendering 15 mm thick cement plaster in Cement Mortar 1:4 onfair faces of brick/concrete surfaces with finished even and smooth without using extra cement and using water proofing compound admixture as per manufacturers instruction including taking down old unserviceable cement plaster, complete all as specified and directed.[Note : WPC will measuered and paid separatly under relevant item of schedule.] 5 M&L Rendering 10mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar 1:3finished even and smooth (without using extra lime or cement) with chicken wire mesh, complete all as specified and directed. 6 Supply only liquidwater proofing compound, complete all as specified and directed. 7 M&L TMT mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed)not less than 0.90mm dia or securing with clip, complete all as specified and directed. 8 M&L TMT mild steel bars 6mm to 8mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed)not less than 0.90mm dia or securing with clip, complete all as specified and directed. 9 M&L Reinforced Cement Concrete (design mix), M-25 (using 20mm graded stone aggregate) as in slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc. including demolition of old unserviceable Reinforced Cement Concrete, complete all as specified and directed. 10 M&L Reinforced Cement Concrete (design mix), M-25 (20mm graded aggregate) for chajjas including demolition of old unserviceable Reinforced Cement Concrete, complete all as specified and directed. 11 Use and waste of Formwork to soffits of suspended slab such as roof slabs, floor slabs, landing and similar works not exceeding 200mm thick (horizontal or sloping), surface of concrete flat for rough finished surface of concrete, complete all as specified and directed. 12 Use and waste of Formwork to chullah hoods, chajjas, troughs and similar items including edges etc surface of concrete flat with fair finished surfaces, complete all as specified and directed. 13 M&L 75mm Plain Cement Concrete 1:3:6 type C1 (using 20mm graded stone aggregate) fininshed the as in plinth protection surfaces even and smooth without using extra cement, including demolition of old unserviceable Plain Cement Concrete, complete all as specified and directed. 14 M&L forming construction joint 30mm deep X 10mm wide with sealing compound grade A, complete all as specified and directed. 15 M&L in repairs providing plain cement concrete, type B0, 1:2:4 (using stone 12.5mm graded aggregate) as in coping to chajja tops and all other similar works, complete all as specified and directed. 16 M&L (a) providing and laying water proofing treatment of sunken portion of WCs, bathroom incl by taking out/demoliton/dismantling of old unserviceable peeled/leaking sunken floors etc & applying cement slurry with acrylic based modified cementitaous composite compound coating of make as approved in technical instruction 5/2003 (b) First layer of slurry of cement @ 0.5 Kg/Sqm mixed with acrylic based polymer modified cementatious composite compounds @ 0.250 Kg/Sqm. This layer will be allowed to air cure for 4 hours. (c) second slurry of cement @ 0.500 Kg/Sqm mixed with acrylic based polymer modified cementatious composite compounds @ 0.250 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (d) 200 micron thick polythene film pasted with the help of bituminous adhesive shall be provided over treatment. (e). Plain Cement Concrete in 1:5:10 using brick aggregate as in filling of sunken floors, complete all as specified and directed. 17 S&F in repairs vitreous China squatting pan, Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) including trap set in and including concrete, complete all as specified and directed. 18 S&F in repairs vitreous china wash down closet pan white, pedestal pattern pedestal pan and trap (excluding flushing cistern and flush pipe), connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device including CP jet spray, complete all as specified and directed. 19 S&F in repairs vitreous China wash basin white, flat back,size 550X450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for pinning in ends of brackets or erecting stand including waste pipe, complete all as specified and directed. 20 S&F in repairs 10 litre capacity PVC low level flushing cisternwith all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (with brackets), incl flush pipe of plyethene of low or high density of PVC 32mm dia for low level cistern, complete all as specified and directed. 21 S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. 22 S&F in repairs 15mm bore, fancy type, stop valve/angle cock (multiple) , chromium platedconcealed type cast copper alloy, screwed down , high pressure , with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. 23 S&F in repairs PVC connection 15mm size PTMT nuts of length 450mm, complete all as specified and directed. 24 S&F in repairs 15mm bore long neck pillar taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred HOT or COLD with long screwed sunk and fly nuts, complete all as specified and directed. 25 S&F in repairs bib taps, cast copper alloy 15mm bore long neck body with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. 26 S&F wall mixer chromium plated, 3 way including telephonic shower arrangement with connecting legs, wall flanges & wall bracket for hand shower, complete all as specified and directed. 27 S&F as in chromium plated grating, square with waste hole, 150mm size of PTMT(minimum 100 gms), complete all as specified and directed. 28 S&F in repairs 600X450 mm bevelled edge mirror of selected quality glass, mounted of 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup, complete all as specified and directed. 29 S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 40mm dia PVC waste pipe, complete all as specified and directed. 30 S&F in repairs tubular towel rail brass chromium plated 20 mm dia `D type 60 cm long between flanges, complete all as specified and directed. 31 S&F in repairs chromium plated shower roses 125 mm longwith or without swivel joints, any size, including fixing fixing to steel pipe or union, complete all as specified and directed. 32 S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. 33 S&F in repairs glass corner shelf with SS guard and railing (size- 200mm x200mm) for bathroom, complete all as specified and directed. 34 S&F in repairs stainless steel kitchen plate rack made out of 0.65mm thick of approved make with plugs, washers, over all size 786mmx610mmx254mm, complete all as specified and directed. 35 M&L 25 mm thick Plain Cement Concrete 1:2:4 type B-0 (Using 12.5mm graded crushed stone aggregate) as in floor, finished the surfaces fair & even to receive floor finishes,including dismantling of old unserviceable Plain Cement Concrete complete all as specified and directed. 36 M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in Cement Mortar 1:6, including dismantling of old unserviceable floor hearth & wall tiling, .complete all as specified and directed. 37 M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqmon vertical surface such as skirtings etc. set and jointed in cement slurryover 10 mm thick rendering in Cement Mortar 1:3including dismantling of old unserviceable floor hearth & wall tiling, complete all as specified and directed. 38 M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc. 0.11 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in Cement Mortar 1:4including dismantling of old unserviceable floor hearth & wall tiling, complete all as specified and directed. 39 M&L Glazed ceramic tiles Coloured 300x450mm 7 to 8 mm thick in wall/dado etc, set & jointedin neat cement slurry & pointed in white or coloured cement to match renderingover 10 mm thick in Cement Mortar 1:3 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfacesincluding dismantling of old unserviceable floor hearth & wall tiling, complete all as specified and directed. 40 M&L 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite of any type of workincluding dismantling of old unserviceable stone work, complete all as specified and directed. 41 M&L 18 to 20mm thick green marble (table rubbed and polished) in steps, jambs, pillars, window cills,bathroom corners cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shadeincluding dismantling of old unserviceable stone work, complete all as specified and directed. 42 Rounding to edges of stone slabs exposededge, such as in steps, cooking platform and othersimilar situation, complete all as specified and directed. 43 M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete lad over cement screed and jointed over screed bed or bedding layer of mortar 20mm thick in Cement Mortar 1:6 for laying floor finishincluding dismantling of old unserviceable stone work, complete all as specified and directed. 44 M&L Kota stone slab 14-16mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 1.042 above over 10mm thick in cement mortar Cement Mortar 1:3 including dismantling of old unserviceable stone work, complete all as specified and directed. 45 Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed. 46 Taking down of chowkats or frames not exc 1.5sqm each with shutters (without taking off shutters from frames), complete all as specified and directed. 47 S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade ), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS scews having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) and 1100N (Edge), minimum compressive strength of 58 N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed.[Note : (i) M.S. hold fast/lugs or SS dash fasteners shall be paid for separately.(ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile demension on plus side shall be acceptable but no extra payment on this account shall be made.] 48 S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat of size 50x125 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade ), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS scews having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) and 1100N (Edge), minimum compressive strength of 58 N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed.[Note : (i) M.S. hold fast/lugs or SS dash fasteners shall be paid for separately.(ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile demension on plus side shall be acceptable but no extra payment on this account shall be made.] 49 S&F factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum frame density of 650 kg/cum, screw withdrawal strength of 1800N (face) and 900N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steelbutt hings of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.[Note : Stainless steel butt hinges and necessary SS Screws shall be paid separately.] 50 S&F 35mm thick factory made single extruded WPC shutter (wood polymer composite) solid wire gauzed i.e. panel will be of wire gauze in lieu ofpanel. The comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum frame density of 650 kg/cum, screw withdrawal strength of 1800N (face) and 900N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steelbutt hings of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.[Note : Stainless steel butt hinges and necessary SS Screws shall be paid separately.] 51 S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. 52 S&F MS flat iron as in hold fast clamps small articles conforming to FE-290 Gde-E-165, complete all as specified and directed. 53 M&L Plain Cement Concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in bed blocks for hold fast including necesssary formwork, complete all as specified and directed. 54 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed. 55 S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed. 56 Dismantling wooden boarding, any description, fixed in any position with nails, complete all as specified and directed. 57 S&F 18/19mm thick prelaminated PVC plain solid board for shelves/wordrobes etc and fixed with screws to PVC frame workincl in this item rate, complete all as specified and directed. 58 S&F 18/19mm thick prelaminated PVC soild board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for shutters, fixed with angle frame work incl stainless steel hinges andf magnet catcher, complete all as specified and directed. 59 S&F Continuous (piano) hinges,width of flaps 40mm stainless steel, bright finish or electrogalvanised, complete all as specified and directed. 60 S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 122 x 54 mm & sash 47 x 64 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed.[Note : (i) Glass or wiremesh shall be paid separately.(ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.] 61 M&L sheet glass 4.8 mm thick ordinary quality and glazing with oil putty and pin in square n. exc 0.50 sqm in each pan, complete all as specified and directed. 62 M&L 4mm thick figured glass, pin head type and glazing with oil putty or with brass screws in square n.exc 0.50 sqm in each pan for bathrooms/toilets ventilators, complete all as specified and directed. 63 S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 , the grill shall be inserted in the wall surface including necessary drilling and grouting with cement etc, complete all as specified and directed. 64 S&F 100mm long butt hinges(ISI marked), extruded alluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed. 65 S&F 75mm long butt hinges (ISI marked), extruded alluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, complete all as specified and directed. 66 S&F aluminium anodised (ISI marked) 150 mm barrel tower bolts of extruded section, complete all as specified and directed. 67 S&F aluminium anodised (ISI marked) 100mm barrel tower bolts of extruded section, complete all as specified and directed. 68 S&F 150 mm long aluminium alloy handles (ISI marked),fabricated type, anodised, complete all as specified and directed. 69 S&F 100 mm long aluminium alloy handles (ISI marked), fabricated type, anodised, complete all as specified and directed. 70 S&F 300 mm long aluminium alloy (ISI marked), anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. 71 S&F 75 mm long hasp and staple (ISI marked), aluminium anodized with bolt to hinge plate and fixed with screws, complete all as specified and directed. 72 S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed. 73 S&F 300 mm mild steel ordinary rat tail rod pattern spring including roller and sollar plates, complete all as specified and directed. 74 S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required includingAluminium snap beading for glazing/ paneling,all complete as per architectural drawings and complete all as specified and directed. 75 S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and complete all as specified and directed. 76 S&F in repairs harrison curtain rails, mild steel,chromium plated with conical end balls suitable for fixing as end of curtain/dropery rods, complete all as specified and directed. 77 Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore, complete all as specified and directed. 78 Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore, complete all as specified and directed. 79 Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth, complete all as specified and directed. 80 S&F 20 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed. 81 S&F 25 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed. 82 Dismantling of cast iron 100 mm dia pipes jointed in cement mortar, complete all as specified and directed. 83 S&F PVC SWR pipes 150 mm bore single socketed in any length with rubber ring joint fixed to wallwith steel clamps for rain water pipes, complete all as specified and directed. 84 S&F PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wallwith steel clamps, complete all as specified and directed. 85 S&F PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint , laid in trenches or in floors including dismantling of old unserviceable CI pipe, complete all as specified and directed. 86 S&F PVC SWR bends of 150 mm bore, complete all as specified and directed. 87 S&F PVC SWR bends of 110 mm bore, complete all as specified and directed. 88 S&F PVC SWR bends of 75 mm bore, complete all as specified and directed. 89 S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 110 mm dia, complete all as specified and directed. 90 S&F PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia, complete all as specified and directed. 91 S&F PVC (SWR) vent cowl 110 mm bore, complete all as specified and directed. 92 M&L PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement, complete all as specified and directed. 93 S&F in repairs for Gun metal gate valve, 20 mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. 94 M&L old size brick work with fly ash bricks straight or curved on plan exc 6 m mean radius build in Cement Mortar 1:6 including dismantling of old unserviceable half brick work, complete all as specified and directed. 95 M&L brick work with half bricks thick fly ash bricks straight or curved on plan exc 6 m mean radius build in Cement Mortar 1:4 including dismantling of old unserviceable half brick work, complete all as specified and directed. 96 M&L prepration of newly plastered surfaces of wall and applying two coat of oil bound distemper over one coat of alkali resistanse primer over a coat of 1mm thick wall care putty, complete all as specified and directed. 97 M&L complete removal of old treatment on old plastered surfaces of wall and applying two coat of oil bound distemper over one coat of alkali resistanse primer over a coat of 1mm thick wall care putty, complete all as specified and directed. 98 M&L prepartion of newly plastered ceiling surfaces and applying three coat of white wash, complete all as specified and directed. 99 M&L complete removal of old treatment from old plastered ceiling surfaces and applyingthree coat of white wash, complete all as specified and directed. 100 M&L prepration of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.[Note : Min 5 (five) years guarantee certificate from manufacturer shall be submitted before issue of completion certificate.] 101 M&L complete removal of old treatment from old plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.[Note : Min 5 (five) years guarantee certificate from manufacturer shall be submitted before issue of completion certificate.] 102 M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of any description not otherwise described over 10cm width or girth, complete all as specified and directed. 103 M&L writing letters or figures (block, Roman, Italic or indian) n exc 30 cm, complete all as specified and directed. 104 S&F PVC waste pipe 32mm dia for wash basin 3.00 mtr complete all as specified and directed. 105 S&F PVC waste pipe 32mm dia for wash basin 3.00 mtr, complete all as specified and directed. 106 Roof treatment to be concluded in stages as mentioned below. complete all as specified and directed: -STAGE I:M&L 25 mm thick average Plain Cement Concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in padding concrete on roof over two coat of high performance SBR based multipurpose polymer for water proofing, repair & bonding at the ratio of 1:3:8 (Latex :Water:Cement) in a criss cross way, including demolition of old unserviceable concrete treatment, rendering, old APP (in roof) & removing the same & cleaning thoroughly the base surface, complete all as specified and directed.[Note : (i) Second coat of latex is laid down minimum interval of 6-8 hours of first coat of latex and after second coat of latex immediate applied plaster work(ii) Make - Sika latex- power or similar make as mentioned in list of make in PS]STAGE II:M&L Plain Cement Concrete(1:2:4) type B-0 (using 20mm graded aggregate) as in roof kerbs or mud stop rounded including demolition of old unserviceable one. 107 Item No. 1.105 Contd….STAGE III:M&L in repairs rendering 10mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar 1:3 finished even and fair includingusing water proofing compound admixture as per manufacturers instructions, [Note : WPC will measured and paid separately under relevant item of schedule.]STAGE IVS&F & Providing water proofing treatment with a layer of APP based polymeric membrane 3mm thick minimum weighing 3.60 to 4.00 kg/sqm reinforced with polyster non wove fabric (wt. not less than 160 gms/sqm) shall be applied over one coat of cold bituminous primer @ 0.40 ltr/sqm (membrane shall be laid using butane torch sealing all joints etc and also include two coat of aluminium paint over APP based polymeric membrane complete all as specified and directed.[Note: The over lap shall be of minimum 75mm in longitudinal direction and 100mm on transverse direction] 108 Dismantling wrought iron or mild steel work of any description not otherwiseprovided for, complete all as specified and directed. 109 S&F Joist channel angle of tee section fixed independently without connecting plate as Fe 410 W (Gde-E-250 quality A), complete all as specified and directed. 110 M&L Plain Cement Concrete 1:3:6, type C2(using 40 mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed. 111 M&L concrete bed to 150mm dia drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested in Plain Cement Concrete 1:3:6 type C2 (using 40mm graded stone aggregate) including demolition & breaking up 150mm dia old unserviceable drain pipes, complete all as specified and directed. 112 Supplying and laying UPVC Eco drain Hi-tech pipe drainage sewer system pipe bearing 160mm dia minimum 4mm thick including jointing with coupler, bend tee as per site requirement complete laid in trenches or floors, complete all as specified and directed. 113 M&L precast cement concrete cover Type B-1,1:1.5:3(using 20mm graded crushed stone aggregates) set in cm 1:4 as in mahhole cover etc., complete all as specified and directed. 114 SCH A PART-II : INTERNAL ELECTRIFICATION 115 Taking down carefully aluminium conductor point wiring (light,fan,socket or power) completeincluding fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing(except those to be reused shall be kept in safe custodyat the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing, complete all as specified and directed. 116 M&L point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one wayswitch using1.5 sqmm nominal cross sectional areamultistrandedcopper conductor ,PVC insulated unsheathedFRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked)fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSHPVC insulated unsheathed earth wire and connecting to earth dolly andbrass screws, washers etc., complete all as specified and directed. 117 All as per item No. 2.02 above but 5 Amp socket on same boardwith other switches, complete all as specified and directed. 118 All as per item No 2.02 above but 5 Amp socket on Independent boardwith other switches, complete all as specified and directed. 119 All as per item No. 2.02 above but 5 Amp Calling bell point with other switches, complete all as specified and directed. 120 All as per item No. 2.02 above but 5 Amp Two way point with other switches, complete all as specified and directed. 121 M&L wiring for socket outlet 3 pin, 15 ampson independent Boardscontrolled by one, one wayswitch using4.0 sqmm nominal cross sectional area multistrandedcopper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, includingpressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked)fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor, PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly andbrass screws, washers etc., complete all as specified and directed. 122 S&F in repairs switch piano flush type, single pole, 5/6 Amps, one way, complete all as specified and directed. 123 S&F in repairs Bell switch piano flush type, single pole, 5/6 Amps, one way, complete all as specified and directed. 124 S&F in repairs switch piano flush type, single pole, 6/16 Amps, Two way, complete all as specified and directed. 125 S&F in repairs socket outlet 2 in 1 multipurpose5 pin, (6 Amps) flush typecontrolled by one switch duly marked, complete all as specified and directed. 126 S&F in repairs switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch, complete all as specified and directed. 127 S&F in repairs switch socket combination 3 pin, (16 Amps) flush typecontrolled by one switch, complete all as specified and directed. 128 S&F in repairs Bell multi music type, AC 230 Volts, single pole 230 volts, complete all as specified and directed. 129 S&F in repairs ceiling rose surface bakelite 45 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps, complete all as specified and directed. 130 S&F in repairs stepped type electronic (min 5 steps) fan regulator flush type 240 Volts ISI marked, complete all as specified and directed. 131 S&F in repairs lamp holder, polycarbonatebody with back plate straight or angular suitable for batten fittings, complete all as specified and directed. 132 S&F in repairs submain two single core, 6 sqmm nominal cross sectional areamultistrandedcopper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts gradedrawing in and including nd including suitable sizePVC conduit (ISI marked),concealed, including 6 sqmm nominal cross sectional areamultistrandedcopper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire, complete all as specified and directed.[Note : (i) Colour code for cable must be followed as per IS standards(ii) 2 run of 6.00sqm main wire one run of 6.00 Sqm earth wire & necessary PVC conduit withfittings, shall be considered as one run.] 133 S&F in repairs wall security light fittings 35 watts 230V, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65/66 including necessary connection completewith all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size, complete all as specified and directed. 134 S&F in repairs 10 W LED light fitting mirror type 2, 220volt AC lighting fixture with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing, complete all as specified and directed. 135 S&F in repairs LED light fitting 1x 20 W LED surface mounting general purpose ultra slim economical LED Battens in extruded PC housing and square to suit variety of application areas connedting up with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as specified and directed. 136 S&F in repairs Decorative wall light, fixture made up of polycarbonate suitable for 9W LED lamp B22 base, complete all as specified and directed. 137 S&F in repairs 12 watt surface mounted square LED Down light Colour (CW) aesthetically designed made by aluminium P-die-cast enclousers, with separate replaceable constant current driver 12 watts for grid ceilling including electrical connection, complete all as specified and directed. 138 S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) without remote after taking down/ dismantling of existing ceiling fan from ceiling & depositing in the MES store room , complete all as specified and directed.[Note : Old existing fan to be deposited in MES store & necessary RV & ledger No. to be obtained] 139 S&F exhaust ventilation fan with louvers of sweep 250mm, 230 volts 1200 Rpm, with blade and frame and louvers sturdy engineering plastic complete with suitable size of hole, ISI marked after taking down/ dismantling of existing ceiling fan from ceiling & depositing in the store room, complete all as specified and directed.[Note : Old existing fan to be deposited in MES store & necessary RV & ledger No. to be obtained] 140 S&F exhaust ventilation fan with louvers of sweep 225mm, 230 volts 1200 Rpm, with blade and frame and louvers metal body complete with suitable size of hole, ISI marked, after taking down/ dismantling of existing ceiling fan from ceiling & depositing in the store room, complete all as specified and directed.[Note : Old existing fan to be deposited in MES store & necessary RV & ledger No. to be obtained] 141 S&F electric water heater (Geyser) storage type steel body with copper inner tank and heating element upto 2KW capacity 25 Litres, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc after taking down/ dismantling of existing geyser & depositing in the store room, complete all as specified and directed.[Note : Old existing fan to be deposited in MES store & necessary RV & ledger No. to be obtained] 142 S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact, complete all as specified and directed.[Note : Cable fixed with suitable size Lux and blanker fill with blanker.] 143 S&F in repairs epoxy powder coated sheet metal enclosure for DBs, Double door (when MCBs to be used), tripple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact, complete all as specified and directed.[Note : Cable fixed with suitable size Lux and blanker fill with blanker.] 144 S&F in repairs 240V, 10 KA C curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and directed. 145 S&F in repairs MCB SPN 32 Amps, C series 10kA, 240 Volts and to be housed in DBs complete including necessry connection, complete all as specified and directed.[Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating.] 146 S&F in repairs MCB TPN 25-63 Amps, C series 10kA, 415 Volts and to be housed in DBs complete including necessry connection, complete all as specified and directed.[Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating.] 147 S&F in repairs 63 Amp MCCB 4 pole, 3 phase, 415 volt of capacityAmp, 16 KA complete with proper copper thimbles, copper reducer etc., with fixed thermal & magnetic setting complete all as specified and directed.[Note : cable fixed with suitable size Lux and blanker fill with blanker.] 148 M&L Earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased inand including 40 mm dia GI lightgrade pipe from upper end of earth plate upto equipments,20 dia bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe andPlain Cement Concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and Reinforced Cement Concrete pit cover 50mm thick precast Reinforced Cement Concrete 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in Electrical Plate No-3 of SSR Part-I complete all as specified and directed and testing on completion.[Note : Ifthe desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.] 149 S&F in repairs of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythene ball screwed for irom pipe 25 mm bore dia with fly nut, complete all as specified and directed. 150 S&F in repairs 25mm bore GI tubing medium grade in trenches / Floor / pillar connetion in old or new postion including fittings including taking down old unseviceable pipe, complete all as specified and directed. 151 S&F in repairs 40mm bore GI tubing medium grade in trenches / Floor / pillar connetion in old or new postion including fittings including taking down old unseviceable pipe, complete all as specified and directed. 152 S&F in repairs 25 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes, complete all as specified and directed. 153 S&F 40 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes, complete all as specified and directed. 154 S&F in repairs capacity 500 Ltrs rotational moulded polyethylene water storage tanks 3 layered, white, anti bacterial, UV resistant, Threaded lid, anti microbial, 100% virgin food grade plastic, prevent algae growth, anti viral/ bacterial/ fungal/ algae properties, (Cylindrical, vertical with closed top) complete including provision of all inlet outlet overflow and drain pipe fittingincluding taking down unserviceable tank, complete all as specified and directed. 155 M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16sqmmx4core laying properly in trench including dismantling old unserviceable cable, complete all as specified and directed. 156 Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in soft/loose soil, complete all as specified and directed. 157 Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25cmin soft/loose soil, complete all as specified and directed. 158 Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed. 159 Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying, complete all as specified and directed.[Note : Punned thickness shall be measured.] 160 M&L sub class B fly ash bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable, complete all as specified and directed. 161 S&F GI Light grade 40 mm dia of size for road cross/cutting on wall floor drain etc., complete all as specified and directed.
Contract Date: Feb 18, 2026 Contract Value : ₹ 79.17 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
West Bengal View Result →
27.
Defence #9588972 AOC
Tender For Welcome Maintenance Of E/M Services For Omq, Sqm Area And Other Em Related Work For Different Locations Under Ge (Mcte) Mhow; 1 Repairs/ Overhauling of Old Existing LT Building indoor/ outdoor Panel/ Distributions boards and repairs/ replacement of glass view for reading of volt/ Amp/ CTs meter and providing rubber/ PVC gasket, lugs of suitable size all sides of door by welding including preparation of old rusted surfaces andapplying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces by spraying including nut bolts, lock, filling cavities with filler, cleaning all dust etc. and writing Qtr Numbers (Like as A, B, C, D) in black paint with skilled painter, complete all as specified and directed. 2 S&F for energy efficient exhaust fan having duty of 300mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including taking down old unsv fan and deposit the same in theAGE E/M-III store complete all as specified and directed. 3 S&F for energy efficient exhaust fan havey duty of 450mm sweep as per site requirement made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including taking down old unsv fand and deposit the same in the AGE E/M-III store complete all as specified and directed. 4 S&F for energy efficient exhaust fan havey duty of 380mm sweep as per site requirement made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including taking down old unsv fand and deposit the same in the AGE E/M-III store complete all as specified and directed. 5 S&F ceiling fans complete with blades, down rods 15mm/ 12mmupto two mtr, run with electronic regulator or remote with battery and complete accessories, 230 V, 50Hz, 1200mm sweep and rated power 26W (+ 10%) and rate speed 350 RPM (+ 10%) Min air delivery 210 CFM with service value shall not be less than 8.00 BEE as per BIS. Five star rated with brushless direct current motor (BLDC), painting to match with existing surfaces including taking down old unsv fans and deposit the same in the MES store complete all as specified and directed. 6 Supply & fix electric wall fan of 400mm sweep, 230 Volts single phase, white in colour, complete with all accessories like nuts, bolts, clamps etc and connection from ceiling rose including taking down old unsv fand and deposit the same in the AGE E/M-III store complete all as specified and directed. 7 S&F for Energy saving new generation environmental friendly long life versatile LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including necessary mounting arrangements and provision of 2.5 Sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting and necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts including taking down old unsv complete all as specified and directed. 8 Supply and fix in repairs LED tube light fittings 1 x 9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of pvc square boxes complete all as specified and directed. 9 S&F for energy saving recess/ surface mounted luminaire 36/ 40/ 42W, high efficiency PMMA diffuser gives soft glare free light, suitable for 600 x 600 ceiling cut out, recess mounted 36W LED luminaire in MS housing (2 x 2) incl Provn ofthree core cable of copper conductor of size 1.5 Sqmm, making necessary electric connetion from ceiling rose to fitting terminal, fixing the fitting on ceiling including cutting, grooving with proper finish and making good, disturbed surface with all fixing arrangement including taking down old u/s complete all as specified and directed. 10 Supply & fix LED Bulk Head luminaire 10W, 6000K pressure die cast housing with IP65 protection complete with electric connection & all necessary fixing arrangement including taking down old u/s complete all as specified and directed. 11 Supply & fix Recessed/ surface mounted LED panel slim, compact, aluminium die castedge lite panel of 15 W, round/ square as per site requirement with premium diffuser to ensure glare free & even distribution of light complete with electric connection including taking down old u/s complete all as specified and directed. 12 S&F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driverconnector block etc complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting including taking down old u/s complete all as specified and directed. 13 Supply and fix in repair inverter LED bulb of 09 watt of base B-22, suitable for fixing in lamp holder complete all as specified and directed. 14 Supply & fix surface mounted round/ Square as per site requirement, LED panel of 12W to 16 W with premium diffuser to ensure glare free & even distribution of light complete with electric connection including taking down old u/s complete all as specified and directed. 15 Supply and fix in repair of LED 9 watt, BGSBL 9W WW LED Bush light, spun aluminium graphite grey powder coated housing with PDC bottom and die cast aluminium alloy spigot Luminous flux 540lm, Luminaire efficacy 60lm/W operation temperature range -10 degree C to + 50 degree C, Electrical class-I surge protection 4KV IP 66, IK06 including connection with all necessary fixing accessories complete all as specified and directed. 16 S&F in repair of flexible Tricolor Strip light suitable for outdoor use IP 65/ 66, 220-240Volts AC supply, 18Meter length, 96 LED/M for uniform brightness, integral electronic LED Driver, surge protection 3.5KV, Operating temperature range -10 0 C to +450 C, luminous Flux 650lm/m, power 144W (18mtr roll) including all necessary arrangement for connecting the strip in the street light pole, suitable size of connector for the same complete all as specified and directed. 17 Supply and fix in repair of Wall light fittings suitablefor LED bulb of 7 watt (B-22), polycarbonate/ opal glass as per site requirement including connection with all necessary fixing accessories complete all as specified and directed. 18 M & L for preparation of old painted/rusted surfaces of 1200/ 1400mm sweep ceiling fan and re-fixing the same after painting of the same with white colour synthetic enamel paint by spraying including filling cavities with filler & one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, complete all as specified and directed.Note:- All T&P and labour team as required will be provided by the contractor and cost deemed to be included in the quoted rate. 19 S&F flush mounting factory made Vertical FP DB, IP-43 Protection -IK 09 with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of space for 125 AmpsMCCB as incomer and SP/ SPN/ TP MCBs as out going, 4 way (Optium 1+12 Module) including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall, including taking down old u/s complete all as specified and directed. 20 S&Fixing in repair LED street light 90 Watt with Epoxy Polyster powder coated pressure die-cast aluminium housing, LEDs are provided with non-yellowing decorative IP lens optic, Silicon gaskets provided for LEDs and control gear compartments, The driver used is specially designed to have built-in surge voltage, open/ short circuit protections, External surge protection provided for additional safety, Side entry mounting for 55 to 65mm OD pipe bracket. ressure die-cast aluminium housing for aiming adjustment of 90 watt led street light with high power led lumnious efficacy 130 lm/watt, correlated color temperature 5665K ± 355K, luminous flux 11700 lm, CRI >70, Die cast aluminum body with pennut lens, Impact resistence 08, Ingress protection 66, Built surge protection 4kv and 10kv both will be inbulid in fixture only, Maintenance of lumen output will be minimum 50,000 hours as per L70B50 clause, Led Chip will be reputed brand only Osram, Cree, Nichee, Birgdelux, philips or authorisedonly, Power factor will be >0.95 not less than .95. Warranty certificate of LED fitting should be atleast 3 years and same should be produced to department through OEM directly. Any defects within warranty period will be rectified by contractor and earth connection of each light fitting should be connected to the system earth point either with 3 core cable or though seprate earth cable complete all as specified and directed. 21 All as per Srl item No. 20.00 above but capacity 60 Watts complete all as specified and directed. 22 S&F in repair of 120 watt led flood light Graphite grey powder coated; matt finished pressure diecast aluminium housing designed to act as hea sink for efficient dissipation of heat, Heat resistant toughened glass provided with silicon gasket for efficient Ingress protection, LEDs are provided with secondary polycarbonate lens optics to get optimum optical performance,Constant current LED driver used is specially designed to have built-in surge voltage, open/short circuit protections.Luminaire is provided with a MS mounting bracket fixed on pressure die-cast aluminium housing for aiming adjustment of 200 watt led flood light with high power led lumnious efficacy 120 lm/ watt, correlated color temperature 5665K ± 355K, luminous flux 24000 lm, CRI >70, Die cast aluminum body with toughned glass along with pennut lens, Impact resistence 08, Ingress protection >66, Built surge protection 4kv and 10kv both will be inbulid in fixture only, Maintenance of lumen output will be minum 50,000 hours as per L70B50 clause, Led Chip will be reputed brand only Osram, Cree, Nichee, Birgdelux, philips only, Power factor will be >0.95 not less than .95. Warranty certificate of LED fitting should be atleast 5 years and same should be prodused to department through OEM directly. Any defects within warranty period will be rectified by contractor and earth connection of each light fitting should be connected to the system earth point either with 3 core cable or though seprate earth cable complete all as specified and directed. 23 S&F of TPN DB with provision for MCB TPN as incomer and SP MCBs as outgoing made of steel sheet phosphatised powder coated with bus bar, neutral link earth bar and DIN Rail having IP 42-IK 09 with metal door capacity 4-ways 415 V, connection with aluminium/ copper lugs including civil/ plastering work for make up good the disturbed surface matching with existing surface including taking down old u/s complete all as specified and directed. 24 S&F for MCCB 4 pole, 415 volts, in the existing panel/ location and connection with using aluminum lugs complete all as specified and directed for100 to125 Amps rating, 16 KA breaking capacity including taking down old u/s complete all as specified and directed. 25 Supply and fix in repair double door SPN DBs 8 ways of powder coated DBs suitable for MCBs fitted with bus bar, Neutral link, Earth bar and Din ral complete all as specified and directed. 26 Supply and fix in repairs double door SPN DBs 4 ways of powder coated DBs suitable for MCBs fitted with bus bar, Neutral link, Earth bar and Din ral complete all as specified and directed. 27 S&F in repair MCB SPN 32 Amps 10 KA, C series including connection with suitable size aluminium/ copper lugscomplete all as specified and directed. 28 S&F in repair MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, B series including connection with suitable size aluminium/ copper lugs complete all as specified and directed. 29 S&F in repair MCB triple pole & neutral 63 Amp, 415 volts, C series 10 KA breaking capacity & connection complete all as specified and directed. 30 S&F in repair PVC insulated flexible cable three core Copper conductor of size1.50 Sqmm, ISI marked, covered with white colour round insulation complete all as specified and directed. 31 S & F in repair PVC insulated flexible cable three core Copper conductor of size2.5 Sqmm, ISI marked, covered with white colour round insulation complete all as specified and directed. 32 S&F in repair PVC insulated flexible cable three core Copper conductor of size4.00 Sqmm, ISI marked, covered with white colour round insulation complete all as specified and directed. 33 S&F in repair PVC twin core cable size 4mm complete all as specified and directed. 34 Supply & laying PVC twin core cable 6 Sqmm complete all as specified and directed 35 M&L for Point wiring with PVC insulated FRLSH, PVC unsheathed cable, single core, stranded, copper conductor cable 1.5 Sqmm size, 1100V grade, drawn into with and including PVC casing-capping/ existing/ concealed not less than 20mm wide, ISI marked, with 1.5 Sqmm unsheathed, stranded copper cable for continuous earth wire and including pressed steel concealed terminal boxes of suitable size made out of 1.2mm thick sheet covered with 2.6mm thick white hylam sheet cover of suitable size for mounting switches/ sockets/ fan regulators or Modular flush box for mounting modular switches/ sockets/ regulators etc including cutting chasing in wall and making good disturbed surface with existing colour complete all as specified and directed. 36 (a)One light/ fan/ bell point controlled by one switch 37 (b)One point for socket outlet 5 Amp on independent board 38 (c)One point for socket outlet 5 Amp same board 39 All as per Srl item No. 35.00 above, but with FRLSH cable 2.5 Sqmm stranded copper conductor FRLSH with 2.5 Sqmm copper conductor earth wire for switch/ socket outlet 5 pin,15 Amps multipurpose on independend board complete all as specified and directed. 40 S&F modular switch 1 way 6 A, 1 module complete all as specified and directed. 41 S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed. 42 S&F switch modular type 16 A, 1 module complete all as specified and directed. 43 S&F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed. 44 S&F ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body forsurface type, 65 x 50mm three terminal complete all as specified and directed. 45 Supply & fix in repairs modular switch One-way 1-Module, 6 Amps, 230V AC complete all as specified and directed. 46 All as per Srl item No. 45.00 but 16 Amps complete all as specified and directed. 47 Supply & fix in repair modular socket 2/3 pin combined 6 Amp, 2 Module, complete all as specified and directed. 48 Supply & fix in repair modular socket 2/3 pin combined 6/16 Amp, 2 Module, complete all as specified and directed. 49 Supply & fix in repair modular bell push, flush type 6 Amp, 1-Module 220 V, complete all as specified and directed. 50 Supply and fix in repair switch piano flush type, 5 Amps, 230V AC, single pole, one way complete all as specified and directed. 51 Supply and fix in repair switch piano flush type 15 Amps, 230V AC single pole one way complete all as specified and directed. 52 Supply and fix in repair, switch piano flush type 05 Amps, 230V AC single pole Two-way complete all as specified and directed. 53 Supply and fix in repair socket out let multipurpose suitable for 2/3 pin 5 Amp flush type complete all as specified and directed. 54 Supply and fix in repair socket out let 2 IN 1, multipurpose suitable for 3 pin 5/15 amp flush type complete all as specified and directed. 55 Supply and fix in repair Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp, flush type universal as per site requirement complete all as specified and directed. 56 Supply and fix in repairs, angle type holder insulated body in white colour with back plate complete all as specified and directed. 57 Supply and fix in repairs bell push, flush type 5 Amp, 220 V, single pole complete all as specified and directed. 58 Supply and fix in repairs, electric bell, ding dong, AC, 220 V, single pole complete all as specified and directed. 59 Supply and fixing in repairs white finished single mounting modular plates suitable for modular accessories of following sizes complete all as specified and directed. 60 (a)Suitable for 1/2 modules, complete all as specified and directed. 61 (b)Suitable for 3 modules, complete all as specified and directed. 62 (c)Suitable for 4 modules, complete all as specified and directed. 63 (d)Suitable for 6 modules, complete all as specified and directed. 64 (e)Suitable for 8 horizontal modules, complete all as specified and directed. 65 Supply and fix in repairs sheet metal boxes concealed in wall suitable for housing modular accessories of following sizes complete all as specified and directed. 66 (a)Suitable for 1 or 2 modules 50mm, complete all as specified and directed. 67 (b)Suitable for 3 modules 50mm, complete all as specified and directed. 68 (c)Suitable for 4 modules 50mm, complete all as specified and directed. 69 (d)Suitable for 6 modules 50mm, complete all as specified and directed. 70 (e)Suitable for 8 modules 50mm, complete all as specified and directed. 71 S&F and testing of Energy efficient 5 Star BEE rating, electric geyser of 25 liters capacity with Fiber/ ceramic body with puff insulation inner tank ceramic with all in built safety accessories like thermo start/ automatic thermal cut out with ON/ OFF/ Cut out indications all pre wired and additional safety accessories like pressure release valve, non return valve in same or other position as ordered with the help of suitable suitable size of nuts & bolts making necessary electrical connection incl taking down and safe deposit of old unserviceable Geyser to E/M Store complete all as directed by Engr-in-charge. 72 Supply & Fixplastic body exhaust fan AC single phase 230/ 240 V of size 200mm sweep with louver, white in colour including duly connection with copper wire etc, including taking down and old unserviceable exaust fan deposit to E/M Store complete all as specified and directed. 73 Supply & Fix plastic body exhaust fan AC single phase 230/ 240 V of size 250mm sweep with louver, white in colour including duly connection with copper wire etc, including taking down and old unserviceable exaust fan deposit to E/M Store complete all as specified and directed. 74 M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etcone run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 Sqmm for P and N and one run of earth and one run of PVC conduit will be measured as one unit. 75 All as per Srl item No. 74.00 here in before butusing 4.0 Sqmm cable, complete all as specified and directed. 76 All as per Srl item No. 74.00 here in before butusing 10.0 Sqmm cable, complete all as specified and directed. 77 Supply and fix electronic single phase meters temper proof LCD display with polycarbonate cover 230 V, 10-60 Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH incl taking down old unsv and deposit to MES store yard complete all as specified and directed. 78 Supply and fix electronic three phase meters temper proof LCD display with polycarbonate cover 230 V, 10-60 Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH incl taking down old unsv and deposit to MES store yard complete all as specified and directed. 79 Supply and fixing GI pipe light grade 40mm dia in short lengths, to walls/ poles/ pillers including cutting, chasing and fixing one endon walls/ pillers/ in ground for garden light fittings/ gate light complete all as specified and directed. 80 Sppply & Laying XLPE insulated, armoured, electric cable with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & makingnecessary connectionincluding taking down old unservicable cable of any corecomplete all as specified and directed, for the following:- 81 (a)35 Sqmm 3.5 core 82 (b)16 Sqmm 4 core 83 (c)10 Sqmm 4 Core 84 (d)6 Sqmm 2 core 85 Excavation in trenches not exc. 1.5mwide and not exc 1.5m deep in hard/ dense soil/ road and getting out complete including making good of excavated road with same material and PCC complete all as specified and directed. 86 Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed. 87 Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed. 88 M&L for filling approved fine crusted sand in trenches as cable cushion to the full width of excavated trench, under and over cable complete all as specified and directed.(Note : Punned thickness of sand shall be measured) 89 M&L for bricks slightly over burnt (kiln burnt), modular bricks, best quality, locally available, laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection complete all as specified and directed. 90 S&F of LED 10 Watt Bollard garden lights fittings, integral pole mounted decorative LED post top with IP 65 protection with robust design and efficient light distribution and taking out old defective fittings andall necessary fixing arrangements complete all as specified and directed. 91 M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 Sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No.5, connected to earthing test point complete including testing on completion all as specified. incl taking down old unsv earthing. 92 Supply & fix in repairs modular fan regulator step type, 2 module type/ normal type as per site requirement complete all as specified and directed. 93 Supply, installation, commissioning and testing indoor type LT wall mounting Panel board of minimum size 1.2 m (hight) x 0.9 m (breath) x 0.30 m (depth) factory made CPRI approved panel weather, dust & vermin proof indoore, double door, front openable, incuding 06 compartment for fixing of 06 Nos single phase meter and MCB and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip/wire busbar of suitable size to MCCB input and MCCB/ MCB out put of suitable length for connection of cable from main busbar, made out of 2.00mm thick mild steel CRCA sheet with suitable size angle iron supporting frame incuding applying two coats of powder coated paint over a coat of red oxide zinc chrome primer 415/440 volts grade including complete internal wiring with 4 Sqmm copper wire and connections of all outgoing/ directed existing cable of any size and removing of old unsv panel complete all as specified and directed provision of the following:-BUSBAR - (a)Copper strip busbar of size 30 x 6mm wrapped with PVC sleeves with maintained the colore code and provision of making holes with copper nuts, bolts, & washer for cable connection including hydrograpic insulatore with nuts & bolts at both ends - 05 NosIncoming - (b)MCCB IP 44 and IP 66/67 protection, 4 pole 415 volts, Lcu =25 KA breaking capacity, rating 100 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links - 01 Nos (c)Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4 x 4) squre dial with selector switch - 01 Nos(d)LED Neon indicator lamp (RYB) with hilder, 230/250 volts, AC - 01 set (set of three). Outgoing - (e)MCB Single pole & neutral 32 Amps, 240 volts, C curve 10 KA complete all as specified and directed - 06 Nos. (f)MCB Single pole & neutral 32 Amps, 240 volts, C curve 10 KA complete all as specified and directed - 01 Nos.(g)Fixing only seviceable existing electric meter - 06 Nos (Obtained from existing Panel) Note:- The rate including removing of extg single phase servicevle meter from u/s LT Indoor panel/ DBs. 94 Supply, installation, commissioning and testing indoor type LT wall mounting Panel board of minimum size 0.95m (hight) x 0.90 m (breath) x 0.30 m (depth) factory made CPRI approved panel weather, dust & vermin proof indoore, double door, front openable, incuding four compartment for fixing of 04 Nos single phase meter and MCB and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip/ wire busbar of suitable size to MCCB input and MCCB/ MCB out put of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame incuding applying two coats of powder coated paint over a coat of red oxide zinc chrome primer 415/440 volts grade including complete internal wiring with 4 sqmm copper wire and connections of all outgoing/ directed existing cable of any size and removing of old unsv panel complete all as directed by Engineer-in-Charge provision of the following:-BUSBAR - (a)Copper strip busbar of size 25 x 5mm wrapped with PVC sleeves with maintained the colore code and provision of making holes with copper nuts, bolts, & washer for cable connection including hydrograpic insulatore with nuts & bolts at both ends - 05 NosIncoming - (b)MCCB IP 44 and IP 66/67 protection, 4 pole 415 volts, Lcu =25 KA breaking capacity, rating 100 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links - 01 Nos(c)Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4 x 4) squre dial with selector switch - 01 Nos.(d)LED Neon indicator lamp (RYB) with hilder, 230/250 volts, AC - 01 set (set of three). Outgoing - (e)MCB Single pole & neutral 63 Amps, 240 volts, C curve 10 KA complete all as specified and directed - 04 Nos.(f)MCB Single pole & neutral 32 Amps, 240 volts, C curve 10 KA complete all as specified and directed - 01 Nos.(g)Fixing only seviceable existing electric meter - 04 Nos (Obtained from existing Panel) Note:- The rate including removing of extg single phase servicevle meter from u/s LT Indoor panel. 95 Supply assembly, erection, testing commissioning of indoor wall mounted panelframe size of 1580mm x 1250mm x 320mm mounted cubical type factory made wall mounted LT panel board suitable for 415V 3 phase 4 wire, 50HZ non-metalic kiosk single door with the required provision for 3 switch gears and control gears along with the approved make. Enclosed in a modular/ combinable thermoplastic polycarbonate panel enclosure which should be shock proof, IP65 (weather proof), rust proof, dust proof, water proof, corrosion proof having internally embadded gasket polyurethin material on the lid and cable entry knockouts on all sides or using cable entry flanges of size 300 x 300 x 170mm required of the LT panel including four comparment for fixing of 10/12 Nos single phase meter and MCB and porviding glass view for reading of meter complete fabrication shall be painted as per specification. Wall mounted LT panel board shall be complete with all standard accessories factory made with OEM manufacturing certificate & the type tests report as per CPRI with the follwing test- degree of protection of system, temperature rise limit, dielectric properties, short circuit with stand strength, effectiveness of protective circuit, clearance and creepage distance, mechanical operation accordance with IEC 60 439-1 including selector switches, phase indicating lamps control fuse unit, MV danger notice plate numbered/ lettered and with comprising the following:- 96 (Item No 28 contd.) Incoming : MCCB 200 A, 4 pole, 25KA-1 No. including CTs, Digital Ammeter, ASS, Digital Volt meter, VSS, Phase indicating lamps & control fuses/ MCBs etc.Bus Bar : Copper strip busbar rating 250A of size for Ph 12 x 10mm, N&E 12 x 5mm and short circuit capacity 30ka, with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 05 NosOutgoing : Separate cubical chamber with a cable alley not less than 300mm width for installation/ connecting the following switch gear :(i) MCB, 63A DP Amps, 240 volts, ‘C’ curve, 10 KA - 10/12 Nos(ii) MCB, 40A DP amps, 240 volts, ‘C’ curve, 10 KA - 01 Nos(iii) Fixing only single phase serviceable existing electric meter - 10/12 Nos (obtained from exiting panel/ bldg) 97 Supply assembly, erection, testing commissioning of indoor wall mounted panel frame size of 1500mm x 900mm x 247mm mounted cubical type factory made IP 65 of environment friendly polycarbonate PC - GFS Insulation-enclosed power distribution board as power switchgear and control gear assembly (PSC) in accordance with IEC 61439-2wall mounted LT panel board with OEM Manufacturing certificate, Bottom parts and lids of the boxes made from impact-resistant polycarbonate, halogen and silicone-free, colour RAL 7035, transparent lid with quick action fasteners for tool operation. Burning behaviour according to IEC 60695-2-11 glow wire test + 960°C.Maximum water absorption 10 mg in accordance with DIN 53473. Protective measure : totally insulated (protection class II), the enclosure should have mechanical strength equivalent to IK10 (bidder should submit compliance for same for polycarbonate enclosure in OEM letterhead with technical bidding) suitable for 415V 3 phase 4 wire, 50HZ non metalic kiosk single door with the required provision for 3 switch gears and control gears along with the approved make. the LT panel including Separate comparment for fixing of four Nos Three Phase & four Nos single phase meter (single phase meter should be connected with three phase meter) and providing MCB and terminal, providing glass view for reading of meter complete fabrication shall be painted as per specification. Wall mounted LT panel board shall be complete with all standard accessories factory made with OEM manufacturing certificate, RTC & test certificate, including, phase indicating lamps control fuse unit, with comprising the following. Drawing from Original Equipment Manufacturing (OEM) to be got approved from accepting officer before supply of Panel. ( Drawing from any other agency/ System house will not be accepted. Panel should be manufactured and assembled by OEM only. Polycarbonate enclosure & Panel manufacturer should be the same. Fabrication/ Assembling from any other system house will not be accepted. Inspection by company engineer after installation at site is mandatory and rates deemed to be included it the overall quoted rates. The bidder should submit all relevant test certificate/ compliance in OEM letterhead during technical evaluation. The bidder should provide warranty/ guarantee format in OEM letter head. The bidder should submit Routine test certificate during order execution in OEM letterhead. Supply with and including Suitable size of glands for incoming & Outgoing cables, Grounding the panel board Suitable PCC Foundation, Structure made out of angle iron Mounting Structure : RAL 7016,Incoming : MCCB 125A, 4 pole, 25KA-1 No. RYB Indication lamp, Digital Ampere Meter. Digital Volt Meter,125A/5A, 5VA, CL.1, CT - 3nos, Fuse Terminal Block with 2A Fuse - 6 NosOutgoing : connecting the following switch gear : (i)MCB, 63A FP Amps, 415 volts, ‘C’ curve, 10 KA - 04 Nos. (ii)MCB, 32A DP Amps, 240 volts, ‘C’ curve, 10 KA - 04 Nos. (iii)04 x 3 phase electric meter - 04 Nos each. (iv)04 x 01 phase electric meter - 04 Nos each
Contract Date: Feb 16, 2026 Contract Value : ₹ 35.95 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Madhya Pradesh View Result →
28.
Tourism #9575405 AOC
Conservation And Site Management Plan Of Shri Conservation And Site Management Plan Of Shri Ballaleshwar Temple, Pali, Tal. Sudhagad, Dist. Raigad= 1 Dismantling the existing lights, tublelight, bulbs, fans, independent plug points, wiring including circuit mains of all types along with accessories etc. complete as per specification No.WG-DM / PW 2 Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/ structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:-(1) The elevational area of the scaffolding shall be measured for payment purpose.(2) The payment will be made once only for execution of all items for such works. 3 providing and laying green net of minimum shade dencity 75 percent as per requrinment on site as per instruction by engr incharge 4 Removing the existing cement/ lime plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 m or spreading in the compound and cleaning the site etc. complete. 5 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. 6 Dismantling the R.C.C. Work 1: 2: 4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. 7 Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.. 8 Removing iron pipe railing having wooden or R.C.C or C.C or iron posts and stacking the materials as directed etc. complete. 9 Removing cement tiles or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all lead, lifts, etc. complete. 10 Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. 11 Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. 12 Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting service able and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. 13 Removing R.S. girders of any size and span lowering the same and stacking neatly wherever directed in the compound scaffolding etc. complete. 14 Dismantling brick masonary in lime or cement mortar and stacking the materials as directed with all lead, lifts, etc. 15 Dismantling stone masonary in lime or cement mortar including stacking the materials as directed with all lead, lifts, etc.. 16 Lowering down carefully existing stone masonry of the monument manually in proper order including shifting the stone elements up to a distance of 50 meter beyond the monument area and stacking them as directed by Engineer in-charge, removing building rubbish and cleaning the site etc. complete. 17 Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete (lift upto 1.50 m) By Manual Means. 18 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. 19 Providing and laying cast in situ 1:2:4 Lime Concrete of trap/ granite/ quartzite/ gneiss metal for foundation and bedding as per detailed specifications and drawings or as directed including bailing out water, centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required with fine aggregate, preparing the lime mortar in lime miller and then mixing with coursed aggregate in drum mixer as per specifications including bailing out water, watering etc. complete. 20 Filling in plinth and floors with approved excavated material in 15 cm . To 20 cm. layers including watering and compacting etc. complete. 21 Conveying the excavated materials, debris of brick or stone masonary, R.C.C. slab, water proofing, stone members/ materials, cement/ lime concrete, tiles/ marbles/ stone slab/ brick bat coba, etc. upto 2.5 km, away from the site and cleaning the site properly. 22 Clean or remove the dust cement plastercolour patches or any other cement or lime patches from the any stone surface with nichesgroovesmoulds architectural designs by using dry/ micro dry/ wet air abrasion method using calcium silicate particlesAluminium silicate particles any crushed stone particles crushed calcium carbonate particles mineral slag copper slagcoconut, almond shells particles glass beads Aluminium oxide particles, It is binding to use any of the above mentioned material with any number of coats until surface gets clean as per the requirement of site engineer, deputed conservation architect. This process includes all required tools, equipment and machinery of any shape and size as per stone surface requirement. This also includes all materials like potable water and scaffolding. At the end clean the surface by using water jet pump. 23 Providing general pest control services to the building to control the nuisance of cockroaches, lizards, pin bores and other insects, etc. with 4 operations in a year and monthly checkup. 24 Providing anti termite treatment to the sides of flooring of the existing building as per I.S. 6313 (Part-III) by punching holes 6 mm dia. drilled at a distance of 30 cm. centre to centre and injecting one percent of chlorodane emulsion concentrate at the rate of 50 ml per hole and sealing by filling putty etc. complete covering 2 years guarantee on bond paper. 25 Providing antitermite treatment to the wooden frames of doors/windows of the existing building as per I.S. 6313 (Part-III) by drilling 6mm dia. holes at four corners on one side and four corners on other side at a downward angle of about 45 degree at the junction of wood work and masonary and injecting150ml. of chlorodane 5% W.C. and sealing by filling putty etc. complete covering 2 years guarantee on bond paper. 26 Providing antitermite treatment to the joints of wooden beams / joist used for the roof work of the existing building as per I.S. 6313 (Part-III) by drilling 6mm dia. holes at a downward angle of about 45 degree at the junction of wood work and masonary and injecting 80ml. of chlorodane 5%W.C. and sealing by filling putty etc. complete covering 2 years guarantee on bond paper. 27 ProvidingpreconstructionalantitermitetreatmentasperI.S.6313(Part-II)bytreatingthe bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percentofchlorophyrifospersquaremeterofsurfaceareacovering10yearsguaranteeon bond paper. 28 Providing and fixingIndian T.W Columns, beams of size 0.30 x 0.30 andmin height - 4.50 m (12 x 12 inch x 15ft) for roofing/ floor/ any wooden members including scaffolding if necessary etc. complete.“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 29 Providing and fixingIndian T.W beams and Stringer beams of size beam- 0.20 x 0.10 - upto 5 m(7.87 x 4 inch x17ft) for wooden members including scaffolding if necessary etc. complete.“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 30 Providing and fixingIndian T.W rafters of size length 0.075 x 0.075 - upto 5 m (2.95 x 2.95 inch x17ft) thick for roofing/ floor/ any wooden members including scaffolding if necessary etc. complete.“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 31 Providing and fixingIndian T.W Purlins, frames and floor joists, and secondary beams of size length 0.125 x 0.075- upto 3.20 m(4.9 x 2.95 inch x 11 ft) for roofing/ floor/ any wooden members including scaffolding if necessary etc. complete.“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 32 Providing and fixingIndian T.W Battensof size (0.025 x 0.025 (1 x 1 inch) thick length 3 m ) for roofing wooden members including scaffolding if necessary etc. complete.“ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 33 Providingstructuralsteelworkinhollowsectionofvariousthicknessandsizesinsquare, rectanular and round shape from 25mm to 450mmsection as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete. 34 Providing and fixing solid wooden door of thickness 0.15 m including frame,fixing Big and small motifs, defensive bolts, pivot and pointed nails and providing steel roller, track for movement of wooden shutter etc. complete as directed by Engineer in charge 35 Providing and fixing solid wooden door of thickness 0.050 m including frame,fixing Big and small motifs, defensive bolts, pivot and pointed nails and providing steel roller, track for movement of wooden shutter etc. complete as directed by Engineer in charge 36 Providing and fixing jaali wooden door of thickness 0.050 m including fixing 8mm dia MS round bars,frame, pivot and providing rust proof paint to iron patti, pointed nails, steel roller, track for movement of wooden shutter etc. complete as directed by Engineer in charge 37 Providingandapplyingmelaminepolishofrequiredfinishtothewoodworkbyspray machineincludingknottingandpreparingtheevensurfacebyscraping,applyingFrench polish , scaffolding if required etc. complete.Note:The work to be executed on prior approval of Superintending Engineer will be necessary. 38 Providing & applying Polyurethane based wood coating to the new or old work in two coats including knotting, preparing the surface by scrapping, scaffolding etc. complete as per manufacturers specifications and as directed. 39 Providing and fixing teak wood railing of 1.05 m height in the temple mandap as per detailed drawings with top and bottom rails of size 0.075 x 0.15m andbalusters of 0.05 x 0.05m, each supported by the vertical newel posts of0.075 x 0.15 x 1.05 m with newel cap of size 0.1 x 0.1mas directed by the Engineer, removing the existing railing members and fixtures, including french polishing, and hardwares and joinery etc. complete. (Note: The work to be executed on preapproval of conservation architect). 40 Providing and fixing 50 mm.(1½″) thick Teak Wood Flooring or Planking for floor, as per detailed specifications and drawings or as directed including the thoroughly seasoned and greatest length best Moulmein teak boards, boards to be 38 mm. (1½″) thick and from 10 m. to 15 cm. (4″ to 6″) in width, side joints to be tongued and grooved or tongued and ploughed as may be specified, heading joints to rest upon the joist below, to break joint with one another and to be rebated and tongued together, the boards to be jammed together by flooring clamps, each board to be secured in position by two 2½″ screws screwed to each of the joists below, the heads of all screws to be countersunk and the exposed surface of boards then planed quite smooth, etc. complete. “ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 41 Providing and fixing 25 mm.(1½″) thick Teak Wood Flooring or Planking for ceiling, as per detailed specifications and drawings or as directed including the thoroughly seasoned and greatest length best Moulmein teak boards, boards to be 38 mm. (1½″) thick and from 10 m. to 15 cm. (4″ to 6″) in width, side joints to be tongued and grooved or tongued and ploughed as may be specified, heading joints to rest upon the joist below, to break joint with one another and to be rebated and tongued together, the boards to be jammed together by flooring clamps, each board to be secured in position by two 2½″ screws screwed to each of the joists below, the heads of all screws to be countersunk and the exposed surface of boards then planed quite smooth, etc. complete. “ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 42 Providing and fixing 75 mm.(1½″) thick Teak Woodfor decorative elements like arches , as per detailed specifications and drawings or as directed including the thoroughly seasoned and greatest length best Moulmein teak boards, boards to be 38 mm. (1½″) thick and from 10 m. to 15 cm. (4″ to 6″) in width, side joints to be tongued and grooved or tongued and ploughed as may be specified, heading joints to rest upon the joist below, to break joint with one another and to be rebated and tongued together, the boards to be jammed together by flooring clamps, each board to be secured in position by two 2½″ screws screwed to each of the joists below, the heads of all screws to be countersunk and the exposed surface of boards then planed quite smooth, etc. complete. “ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” Including carving, moulding, etc complete 43 Providing and fixing Ductile iron Man Hole Covers/ Strom Water Grating and Grating with frame of Various sizes, weight and types and load bearing capacity as per EN-124, equivalent NECO with prior approval of concerned Superitending Engineer. 44 Providing and Fixing Decorative / Ornamental grills as per design for compound wall / Fencing including fabricating the grill using M.S. square / round bar, flats and angles including painting with one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint of approved colour and brand etc. complete as directed. 45 Providing Un-coursed Rubble Masonry of trapstones in lime mortar 1:1½, in foundation and plinth as per detailed specifications and drawings or as directed including the stones to be set in the work as received from the quarry, after merely knocking off weak corners and edges with the masons hammer, the stones shall be carefully laid so as to break joints, no joint shall exceed 12.5 mm. (½″) in thickness, every stone shall be set flush in mortar, the face stone shall be for greater size, and good beds, one through stone shall be inserted at least every 0.80 sq. mete (1 square yard), the joints shall be racked out carefully at least 25 mm. (1″) where pointing or plastering to be done, striking joints where no pointing or plastering is to be done, preparing the lime mortar in lime miller, bailing out water, watering and all exposed masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 46 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Flooringas per the site requirement of size of stone [0.60 x 0.45 x 0.15 Meter] (24 x 18 x 6) asper detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 47 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Bracketsas per the site requirement of size of stone [0.60 x 0.45 x 0.30 Meter] as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 48 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Chajja as per the site requirement of size of stone [0.90 x 0.60 x 0.21 Meter] (36 x 24 x 8.5) as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 49 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Walls, Parapetas per the site requirement of size of stone [0.60 x 0.45 x 0.30 Meter] (24 x 18 x 12) as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 50 Providing Semi-circular Coping Cut-stone Second Sort, 22.5 cm. (9″) height and 52.5 cm. (1ꞌ9″) wide of trap / granite stones in lime mortar 1:1½ with size of stone [0.75 x 0.55 x 0.20 Meter] as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, the stone shall be dressed full or to template, exposed face of the stones shall be fine rough tooled, semi-circular and all joints shall be in line and close and not more than 3 mm. (⅛″) thick, preparing the lime mortar in lime miller, scaffolding, watering and all coping work when handed over to be perfectly clean and free from all mortar stains etc. complete. 51 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Talkhadaas per the site requirement of size of stone [0.50 x 0.50 x 0.30Meter] (18 x 18 x 12) as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 52 Providing Ashlar Fine Masonry of trap stones in lime mortar 1:1 for Domeas per the site requirement of size of stone [0.45 x 0.30 x 0.15 Meter] (18 x 12 x 6) as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 53 Providing/Re-setting Ashlar Fine Masonry of reuse-stones in lime mortar 1:1 in superstructure as per detailed specifications and drawings or as directed including the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course, the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 54 Providing Block In Course Masonry of trap (black basalt) in lime mortar 1:1½ with size of stone [0.45 x 0.35 x 0.20 m] (18 x 14 x 8) for steps as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, the face of stones shall be rough-tooled, rustic (with or without chisel draft, except at quoins), or chamfered as specified, the beds and joints of all ashlar stones to be dressed perfectly true, square and full, headers shall not be less in length than breadth of ashlar stone plus 45 cm. (1ꞌ6″), the stones shall be set in mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 17.5 cm. (7″) in height, the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, bailing out water, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 55 Providing Ashlar Rough-tooled Stone Steps of trap / granite stones in lime mortar 1:1½ with size of stone[0.60 x 0.40 x 0.213 Meter]as per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind, the stones shall be of exact size and shape, the shall be rough-tooled on exposed surface, holes for balusters should be cut in the steps before they are laid, each stone shall rest at least 3.8 cm. (1½″) on that below it, the beds or joints being in no case more than 3 mm. (⅛″), preparing the lime mortar in lime miller, watering and all steps work when handed over to be perfectly clean and free from all mortar stains etc. complete. 56 Providing/Re-setting Ashlar Rough-tooled Stone Steps of reuse-stones in lime mortar 1:1½ as per detailed specifications and drawings or as directed including each stone shall rest at least 3.8 cm. (1½″) on that below it, the beds or joints being in no case more than 3 mm. (⅛″), preparing the lime mortar in lime miller, watering and all steps work when handed over to be perfectly clean and free from all mortar stains etc. complete. 57 Providing and fixing Trap Stone Paving, Second Sort in lime mortar 1:1, with size of stone [0.60 x 0.45 x 0.15 meter] (24 x 18 x 6) , as per detailed specifications and drawings or as directed including all stone slabs to of approved quality, hard, even, sound, durable and uniform thickness, the stones to be very finely chisel-dressed on the surface and the course to be of prescribed width, the joints running true, the stones to be laid with joints not exceeding 6 mm. (¼″) thick and to be evenly and firmly bedded flush in mortar on the concrete and no hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing the lime mortar in lime miller, watering and all paving work when handed over to be perfectly clean and free from all mortar stains etc. complete. 58 Providing Ashlar Arching of trap / granite stones in lime mortar 1:1, with size of stone 0.60 x 0.45 x 0.30 (24 x 18 x 12) as per detailed specifications and drawings or as directed including the arch stones be of approved quality, colour, hard and free from defect of any kind, the arch stones in all cases of the entire thickness, the arch stones shall be dressed full and true to their proper shapes with the necessary summering, twist or winding and be set in fine mortar, the intrados, joints and beds to fairtooled and left full, the cast or keying course to be accurately fitted, at all horizontal joints the intrados to have a 2 cm. (¾″) chamfer, the face stone may be tooled or rock-faced with or without chamfer as directed, in arches up to 60 cm. (2ꞌ) in depth all stones shall be of the full thickness of the ring, arches to be built on proper centring, the bed joints shall be radial and the side joints shall be at right angles to the bed joints and the thickness of the joints shall not exceed 5 mm. (3/16″) preparing the lime mortar in lime miller, cantering/scaffolding, watering and all arch work when handed over to be perfectly clean and free from all mortar stains etc. complete. 59 Making of moulding/ grooving/ chamfering on the surface of the formed stone member, as per given design or drawing, by an expert, artisan craftsman, including light sand papering of the finished member if required. 60 Making of relief architectural carving on the surface of the formed stone member, as per given design or drawing, by an expert, artisan craftsman, including light sand papering of the finished member if required. 61 Providing Brick Masonry First Class in superstructure with size of brick 0.20 x 0.15 x 0.07 in lime mortar 1:1½, as per detailed specifications and drawings or as directed including the bricks to be of uniform size, moulded ground, thoroughly well burnt and sound, ringing clearly when stuck with trowel, the bricks to be soaked in water for 12 hours before used, the bricks are to be laid flush in mortar in such bond as directed, as far as possible, bricks of uniform colour are to be selected for the face work when it is not to be plastered, the joints are not to exceed 12.5 mm. (½″), no bats or half brick to be used in the work, racking out joints where pointing or plastering to be done, striking joints where no pointing or plastering is to be done, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 62 Providing and laying cast in situ 1:1:4 Lime Concrete of broken brick metal for coping or waterproofing as per detailed specifications and drawings or as directed including centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required, with fine aggregate, preparing the lime mortar in lime miller and then mixing with coursed aggregate or surkhi in drum mixer, the concrete must be bitten for two days with pouring water as per specifications, scaffolding, watering and all concrete work when handed over to be perfectly clean and free from all mortar stains, etc. complete. 63 Providing injection grouting with a slurry of lime and fine screened sand in proportion 1 : 1 with a proper pressurized jet pump, including cleaning, washing and packing the exisitng cracks or holes in the brick or stone masonry properly upwards with the slurry, scaffolding, curing etc. complete 64 Providing Lime Pointing to stone work in lime mortar 1:1 in superstructure, as per detailed specifications and drawings or as directed including all face or visible work shall be pointed, unless otherwise specified and shall be done while the mortar is fresh, the mortar shall consists of lime and fine sand shall not be ground fine but sand should be finer, the joints of the pointed work shall be neatly defined by the pointing, the lines shall be regular and uniform in breadth and the joints shall be raised or flat as may directed, preparing the lime mortar with 640 gram pulp of wood apple (Belfruit) per cubic metre of lime mortar as a bonding material, scaffolding, watering and all work when handed over to be perfectly clean and free from all mortar stains etc. complete 65 Providing 12 mm. thick Rough Cast Lime Plaster in single coat in lime mortar 1½:1 in superstructure, as per detailed specifications and drawings or as directed including all joints in masonry and brick work are to be racked out to a depth of at least 20 mm. and the wall to be washed with fresh water and thoroughly wetted for six hours before plastering, the plaster to be applied in an even and uniform coat well pressed in to the joints and to be well beaten for 1½ days with hand tappers, the plaster should also be well sprinkle during the proses of beating with a mixture of 1.10 kg jaggary and 640 gram pulp of wood apple (Belfruit) in 90 to 135 litre of water, the plaster being wetted occasionally with fresh water while the beating is in progress, all exposed angles and junctions with door frame to be carefully finished, all mouldings shall be worked true to template and drawn neat, clean and level, soffits of arches must true arch of circle, preparing the lime mortar in lime miller with 1.60 kg Gugal (a kind of fragrant gum) and 960 gram chopped hemp (fibre of bhendi or tag ) per cubic metre of lime mortar as a bonding material, of lime as a bonding material, scaffolding, watering and all work when handed over to be perfectly clean and free from all mortar stains etc. complete. 66 Stucco work in lime, surkhi and sand (1:1:1) as per traditional practices and design, the mortar should be prepared by grinding mill only. The thickness varies from 10mm to 100mm as per design. 67 Providing and applying integral fine coat, with addition of colour pigments, as paint to the plain lime stucco plaster in 2 layers, including scaffolding, curing, all leads and lifts, etc. complete. 1) The first coat to be laid is a mixture of fine lime and white washing lime in proportion of 2:1,made smooth with wooden rubbers and very lightly beaten. 2)The finishing coat consisting of fine lime, white washing lime, mixed with the appropriate pigment in 1:2:1 proportion is to be applied and well polished with trowels. 68 Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand and manufacturer, on cleaned sand stone surface at desired locations as per direction of Engineer-in-charge (The rate is inclusive of all materials & labours involved except scaffolding). 69 Application of water, oil and stain repellent, Non film forming, breathable, Water/Chlorophyllin based Protectguard MG of Killickguard or equivalent with brush on Stone Façade in two coats. Applications to be done 70 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete (300 mm dia. R.C.C. pipe) 71 Providing and laying Hyperplas standard or equivalent polymeric multiple monolithic five layer water proofing flexible, pliable and high tensile strength membrane (3 Kilogram/ One Square Metre) & consist of centre core of 90 micron thick High Molecular High density Polyethylene film (HMHDPE) which is protected on both the side with polymeric mix. Applying the membrane by thermofusing to roof & parapet after applying thin film of hot blown bitumen 85/25 or 90/15 grade @ 1.2 Kilogram/ One Square Metre maximum as per surface condition or Hyperplas primer @ 250 gms/ One Square Metre as per site condition on the surface to be treated with 10 cm overlapping including finishing etc. complete and covering guarantee of 7 years on stamp paper of Rs. 100/- and as directed by Engineer-in-charge. (Prior permission of S.E.in writing is necessary before inclusion of this item in estimate). 72 Shingles on Roof : Providing and fixing shingles on Roof of size 17x40 inch to 13.1/4 B2042to 39.1/8 of asphalt. The material are resistance against fire and atmospheric aggressions and are developed using high quality material and cutting edge technology.R.A. Unit : 1 / Square Metre 73 Providing and fixing Teak wood Eaves Board 15 cm.(6″) wide and 12.5 mm. (½″) thick, as per detailed specifications and drawings or as directed including the planks to be best Moulmein teak to be 12.5 mm. (½″) thick and 15 cm.(6″) in width, of a uniform colour and planed, the planks to be laid truly parallel to the floor so as to cover the end rows of the tiling and to be fixed with screws of the proper length driven countersunk, all joints to be neat and close, scaffoldingetc. complete. “ It is mandatory to use well seasoned and first quality Indian Teak Wood from the Forest Department’s FDCML.” 74 Providing andfixing colourcoatedZincalume (R)AZ150(min150gms/sq.mt.totalon each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength,metallichotdipcoatedwithAluminium-Zincalloy(55%aluminium 43.4%zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganicpigment).Thepaintshallhaveatotalcoatingthicknessofnominal35um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center.The endribshallbedesignedforanti-capillarygroove.andreturnleg.Thefeed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 75 Galvanised iron sheet 1 mm (20 B.W.G.) eaves precoated gutter 200 mm to 230 mm wide and 100 mm to 125 mm deep moulded or half round girth upto 600mm including iron rods, on the edges (throughout the length) and galvanised iron sheet ferrules with fixtures, for outlets wherever required clamped using W.I. clamp 38 mm x 3 mm fixed 1.0 m C/C including making necessary connections with rain water pipes etc complete and as directed. 76 Providing andfixing 10cm C.I.NahaniTrapincludingC.I.gratingbendandpiece ofC.I. pipe upto the outside face of the wall complete. 77 Supplying and Fixing 100 mm internal dia. 4.0 mm thk. (weight approx.10.0 Kg./Rm.) centrifugally cast C. I. pipes Confirming to IS 3989, sockets spigots type pipe for rain water/soil waste and ventilation with all fittings including scffolding, 1 : 1 CM jointing proper embedding and fixing on wall & column etc complete as directed. 78 Supply and Installation of translucent roof with DPI Flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 12 mm thick of 900 mm (min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility & strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 One Numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineering in charge. Colour: As per Approval. Approved Make: FLUX by DPI Daylighting or approved equivalent The 12mm thick panels shall be used for a roofing height of upto 15 mtrs. 79 Providing and fixing Country cut teak wood partly veneered and partly glazed partition with 75mmx50mmframeat60cmcenterand9mmthickcommercialplyonbothsides, decorative veneer of 4 mm thick and plain glass 5 mm thick, including French polishing etc.complete 80 Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 81 Free Standing Table @ 1500Lx600Dx750HTProviding and fixing Table of Size 1500 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board.All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :-Metal Powder Coated - Black Color, CPU TROLLEY :-Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, 82 Providing & Arrangemnt of MiId Back chair, Normal SyncroMechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery 83 Public Seating Chair. - 3 SeaterProviding and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. 84 Providing cultural and directionalsignage for information dissemination about the temple in GRC as per the design and location provided by the conservation architect. 85 Providing and fixing Directional & Instructional Signage in the acrylic board to be used indoor spaces. SS screws to be used for fixing the signage to the wall/ wooden surface.. 86 Providing lettering as part of the signage (Cultural, directional and informatory) for information dissemination about the fort in GRC as per the design and location provided by the conservation architect. 87 Providing 120 litre SS litter bins of approved quality and design as per conservation architect of size 0.90 x 0.50 x 0.90 m in desired location 88 ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-10oftrap/granite/ quartzite/gneissmetalforfoundationandbeddingincludingbailingoutwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredandcuringcomplete,withfullyautomaticmicroprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) 89 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-30oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steelcenteringformwork,cover blockslaying/pumping, compactionfinishingtheformedsurfaceswithcementmortar1:3ofsufficientminimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic microprocessorbasedPLCwithSCADAenabledreversibleDrumTypemixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 90 Providing and laying Cast in situ/ Ready Mix cement concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, coverblocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 91 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-30oftrap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping, compactionandrougheningthesurfaceifspecialfinishistobeprovidedandcuringetc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 92 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-30oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 93 Providing and laying in-situM30 Grade unreinforced plain cement concretepavementover a prepared sub base with 43 grade cement , coarse and fine aggregate( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradationas per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcheras per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and gradesas directed by Engineer-in-charge and curingby curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top withdepth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge.with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. 94 Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete. 95 Providing and fixing in position TMT FE 500, 25mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directedincluding handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete. 96 Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge. 97 Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mOne Metric Tonneo 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer.(A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide) 98 Providing and fixing in position HCRM / CRS (CorrosionResistant Steel) bar reinforcement ofvariousdiametersforR.C.C.pilecaps,footings,foundations,slabs,beamscolumns, canopies,staircase,newels,chajjas,lintelspardis,copings,fins,archesetc.asperdetailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 99 Providing and Fixing mat finish stainless steel (of 302 grade ) railing with toppipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75mmdiameteretc.complete(PriorapprovalofsampleandbrandbyEx.Engineeris necessary before use) 100 Providing and installing the water cooler with Seam welded food grade Stainless steel body and tank, voltage overload compressor protection and adjustable thermostat, precoated outer body for corrosion resistance, cooling rate minimum 80 litres per hour and tank storage capacity 100 litres etc complete as per engineer incharge 101 ProvidingandfixingheavydutyinterlockingconcreteColouredpavingblocksof60mm thickness of having a strength of 300 Kilogram/Sq.cm. of approvedquality andshape ona bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete 102 Providing and laying in place 300mm x 300mm x 16mm cement tactile directional and warning tiles (for a person with visual impairment)of the approved brand and make and specified colour for outdoor floors such as footpath, courtyard, multimodals location etc. laid on 20mm thick base of cement mortar 1:4 (1 cement: 4 coarse sand) in all shapes and patterns including grouting the joints with white cement with matching pigments etc. complete as per direction of engineer in charge 103 ProvidingandconstructingBrickMasonryInspectionChamber60cmx45cmx90cm including1:4:8cementconcretefoundation1:2:4cementconcretechannelshalfround G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75 Kilogram with lid and frame fixed in cement concrete 104 Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposedfaces, raking out joints on exposedfaces and watering etc. Complete. 105 Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar1:6insuperstructureincludingstrikingjoints,rakingoutjoints,wateringand scaffolding etc. Complete 106 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade withfullmoulding and three grooved line forthetreadsonbedof1:4Cementmortarincludingfloatfilling jointswithneatcement slurry curing polishing and cleaningetc. complete. 107 Providing and fixing partition with kadappa stone of all sizes and 25 mm thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polish- ing, cleaning etc complete. 108 Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete 109 Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exteriorgrade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete 110 Providing and fixing 30mm thickPVC FLUSH L DOOR SHUTTER consisting of panel of hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mminserted inside the hollow section of stiles rails top ?and bottom railsandtwo19x19mm MStubesinsertedhorizontallyinsidethe hollowprofile section using 4/5 mm sheet using screws hollow profile shall be lipped with 10 mm (5mm x2) thickx20mmwidthonstilesandrailsusingsolventcement.Theinnerpanelshallbe laminatedwith5mm thicktermite proofwaterproof plain/prelam PVCsheet using solvent cementonthebothsidesofthepanelincludingstainlesssteelfixturesandfasteningetc. Complete as per direction of Engineer incharge, manufacturers specification and drawing. 111 Providing and fixing Modular false ceiling of 600 x 600 mm center to center and 13 mm thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended falseceilingconsistingofalluminiumT2”x1½”(50mmx40mm)weighing0.39 Kilogram/m at 60 cms center center and fixed with ½” x ½” (15 x 15 mm) flanges weighing 0.19 Kilogram/m suspended on 6 mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m etc. (all alluminium sections shall be anodized) including all labour, material, lifts etc. complete. 112 Providing and fixing Country cut teak wood partly veneered and partly glazed partition with 75mmx50mmframeat60cmcenterand9mmthickcommercialplyonbothsides, decorative veneer of 4 mm thick and plain glass 5 mm thick, including French polishing etc.complete 113 Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. 114 Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete 115 Providing andconstructing granite kitchenplatform withfixing of stainlesssteelsink 600 mm x 450mm size as per detaileddrawing including vertical bothside polishedkadappah stone 25 to 30 mm thick supports with kadappahtop 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two verticalgranitesupports15cmheightandtopgraniteof75x40cmincludingcutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) 116 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurfacebytakingoutgrainsandcuringforfourteendays scaffolding etc.complete. 117 Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:3without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. 118 Providingandapplyingplaster/wallpunningwithplasterofparis(withplasterofparis material)in10to13millimeterthicknessto previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. 119 ProvidingandapplyingTextureplasterwithfinishingwithtexturematerial ofapproved makein 3 to 4 millimeterthickness on previously plastered surface, including Plaster Groove 6mmthicknessorTapeGrooves35to45mmthicknessorasrequired,inallposition including preparing the surface, scaffolding etc. complete. 120 Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. 121 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to oldplastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete. 122 Providing and fixing white european type wall-hung, Size 360mm x 360mm x 575 mm with flush valvehaving flow rate up to 6.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalentmakeincluding PVC soil pipe, vent pipe upto outside face of wall, 100mm diaPVCplug bend inlet pipe all fittings,cutting & making good walls, floors etc as directed by Engineer in charge.( Make shall conform to manufacturers Green product and shall got approved from the Engineer In Charge.) 123 ProvidingandfixingOrissatypewhiteglazedearthenware575mmwaterclosetpan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. 124 Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete 125 Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete. 126 Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. 127 Providing and fixing coloured glazed earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. 128 Providing and fixing white glazed urinal with Pressmatic auto closing valvehaving flow rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalentmake with P.V.C. waste pipewith fittingarrangementetc.complete as directed by Engineer in charge.( Make shall conform to manufacturers Green product and shall got approved from the Engineer In Charge.) 129 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm 130 Providing and fixing in position powder coated aluminium louvered windows / ventilator of varioussizeswithpowdercoatingasperdetaileddrawingandspecificationsincluding aluminiumframes80x38mmx1.22mmboxtype,5mmthicksheetglasslouvers,of approved quality etc. complete. 131 Grab bars-Providing SS grab bars set for accessible toilets comprising of 4 nos. Grab bars as specified below.(1 nos. wing grab bar + 1 nos. L shaped grab bar + 2 nos. straight grab bars = 1 typical set) 27a) Swing grab bar (1 NOS) Providing a S.S. 304 SWING HANDICAP GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm of the roved brand and make. 27b) L Shaped grab bar (1 NOS) Providing S.S. 304 L SHAPED DISABLED GRAB BARof IZE-600MM (H) X600MM (D) and 32MM DIA. and thicknessmm of the approved brand and make.27c) Straight grab bar (2 NOS)Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm of the approved brand and make. 132 Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. 133 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 134 Providingandfixing100mmdiastabiliserpipe/P.V.C.soilvent/wastepipeandwith necessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. 135 Sofa Set 3+1+1Providing & fixingSofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms)Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat 136 Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. 137 3 DRAWER PEDESTAL UNIT @ 392L x 450D x 680Ht. mm.3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board. 138 Low Height Openable Storage @ 900Lx450x750HT Providing and fixing Openable Steel Storage of 900 x 450 x 750Ht, with 2 adjustable shelves, Complete body & shutter made in0.8 mm thick & Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 mm. thk additional Top on top of storage as as per drawing 139 Book Case with Glass Shutter @ 825Lx300Dx1650HTProviding & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing. 140 Tea Table 900mm X 750mm X 450mm for m.s. ante chamberProviding And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made OutOf 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc. 141 Stainless Steel Pipe curtain rod . Providing & fixing of SS pipe curtain rodsincluding Brackets as per site in charge instructions & all necessary Fittings etc. completed 142 CurtainsProviding clothes for curtain of Bombay Dyeing/Binni/Mafatlal etc brands, stitching as per required size with Frill (Zaller) & fixing at required places ( including rings )Note:-Measurement would be taken as per actual length of window & default width ( i.e . 48” panha) Curtain (Material Synthetic Clothes & cost of clothes starting from Rs 250/- onwards) 143 Providing and fixing during laying in RCC Slabrectangular 2 mm thickM.S. sheet fan hook box ofsize 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface 144 Providing and fixing H.D.P container one piece moulded water tank made out oflowdensitypolythylerandbuiltcorrugationincludingofdeliveryuptodestination hoisting andfixing of accessories such as inlet, outlet overflow of alltanks capacityabove 1000 to 20,000 litres 145 ProvidingwaterproofbeddingforflooringofBathandWC25mmthickinC.M.1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. 146 Providing waterproof plaster in W.C. and bath12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles) (As directed by Engineer in Charge) 147 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixedwithapprovedwaterproofingcompound.Markingfinishedsurfacewithfalse squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for requiredheight,withdripmouldatthejunctionofplasterandparapetandcuringand covering10yearsGuaranteeagainstleakproofnessonCourtfeestamppaperofRs.500/- including ponding test etc. complete. 148 Providingandlayingdampproofcourse50mmthickinM20cementconcretelayerand bitumen / using cement with waterproofing compound curing, formwork etc. complete. 149 Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/ One Square Metreasperdrawingincludingfixturesnecessaryweldingandpaintingwithonecoatof anticorrosive paint and two coats of oil painting complete. 150 Supply and Making of New Heritage Building Models In Acrylic /FRP material , Duco Painting , Artificial lawn and Surrounding Gardening work for Beautification of model,preparation of Base in Ply and other materials as per requirement of model by Instruction of Engineer In charge . Site Visit , Permissions and Approvals for models making , Drawings Preparation and Making . Providing and Fixing of MS Frame and Transparent Acrylic Cover to this Models . Transportation of material and Complete Model transportation at Museum/ location instructed 151 Providing and Fixing of Transparent Acrylic Cover For Heritage building Model include Cutting of Sheet as per require size, hole drill, Joint covering of Tape , installation of cover along with material transportation Cost . 152 Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 80 mm thickwith 3 mm diameter mild steel bar reinforcement, of approved design on both sides, fixing in cement mortar 1:3 and curing etc .complete. 153 Providing and fixing in position Terracotta Jali block wall as per desired shape as a decorative feature in interior as well as exterior, block size - 200 x 200 x 60, and weight of 2 - 2.5 kg for each block in natural red color. Jali wall to be installed in specific openings as a fenestration detail, with neccessary fixtures, chemicals etc completes as specified by the conservation arhitect.
Contract Date: Feb 12, 2026 Contract Value : ₹ 22.65 Crore
Government Departments No of Bidders 3
Maharashtra View Result →
29.
Public Administrative Department #9493970 Technical Bid
Tender For Place making work from Naja Market Novelty Square to Municipal Corporation office in Hazratganj - DISMANTLING WORK 2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 3 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) 4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (in cement mortar) 5 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 6 Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (BITUMINOUS ROAD) 7 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 8 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 9 Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge 10 CIVIL WORK 11 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil 12 Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge. 13 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 14 Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc for mass concrete 15 Providing & Laying Designer Pavers 100mm x 100mm with thickness ranging from 70-90mm of approved shape and complete as per direction of Engineer-in- Charge. including transport ,loading ,unloading and conveyance of material from available source to work site, including labour charges for fixing and pointing etc., complete 16 Sand FillingFilling in foundation trenches as per drawing and technical specifications clause 305.3.9 17 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) 18 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 19 Cement mortar 1:3 (1 cement :3 coarse sand) 20 12 mm cement plaster of mix : 21 1:4 (1 cement: 4 coarse sand) 22 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 23 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 24 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer 25 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand): 25mm thick 26 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineerin-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 27 Supply and installation of 60 L: AUX Waste Bin of material Stainless Style with Contemporary Mounting: Root fixed, Surface/baseplate fixed, wall/post mounted with Features: Ashtray, complete with foundation as per the direction of the Engineer in charge 28 Providing and laying drain gratings on both sides of the road anlong with tree grating wherever required. 29 Drain Grating - FRP GRATING (DRAIN)SIZE: 366 x 1001 x 30 H MMTHICKNESS: 6/7 MM 30 Tree Grating - SIZE: 800 x 800 x 400 (Inner Dia’) MMTHICKNESS: 30 MM 31 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Size of Tile 600 x 1200 mm 32 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 33 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia 34 Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications 35 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 36 Centering and shuttering including strutting, propping etc. and removal of form for : Walls 37 Steel in kg 38 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. 39 For vertical surface two coats @ 0.70 kg per sqm per coat 40 For horizontal surface one coat @1.10 kg per sqm. 41 Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineerin-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately). 12 mm thick one side Pre-laminated particle board (decorative lamination on oneside and other sides balancing lamination) grade -1, medium density flat pressed,three layer particle board FPT - I or graded wood particle board FPT-1 conformingto IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 andpre-laminated conforming to IS : 12823, Grade -1, Type II marked 42 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 450 mm dia 43 Boaring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS : 2800 part I, including collecting sample from different starta, preparing and submitting equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer In charge, up to 150 meter depth below ground level. 300 mm diaAll type of soil (DAR 23.2.1.1 based)Sanction Rate 44 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia 45 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia having minimum wall thickness5.40 mm 46 Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm in the recharge pit, over the existing layer of boulders, in required thickness for all leads & lifts all complete as per direction of Engineer in charge. DAR 23.6 47 brick ballast 40 mm class 150 48 brick ballast 40 mm class 150 49 Providing & fixing sand stone Single piece ornamental bench of approved design pattern (1200x450x450MM) and specifications including, all materials, labour and T & Petc. required for proper completion of work as directed by engineer - in -charge 50 Supply and fixing of Bollard made from mid steel with CNC machine finishingwith 140mm outer diameter , thickness of 3mm r and 1100mm Height . Expose height 900mm from above Ground level and fixed the remaining 200mm below the GL. three number of circular rib of R06mm radius are provided at the top . The whole product is power coated black colour as per standard recommendation of Engineer. For fixing the Bollards with M10 cement concrete footing of minimum dimension 20cmx20cmx20cm,with base plate, anchor rods complete. 51 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 52 Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bilingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applyingHeat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee Support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. 53 Mandatory/ Regulatory sign boards of 900 mm diametrewith support length of 3750 mm 54 Providing and fixing StandAlone Signage in Marble of approved thickness with powder coated 10-12mm MS letters and illustration at desired locations with letters (in english, hindi and Braille)- etched, through cut, infilled or painted, also including the cost of design, fabrication and onsite installation with all the necessary accessories and equipments for fixing on any surface as per drawing and design approved from Architect in charge English: Helvetica Font with min. 36 size Hindi: Krutidev Fontwith min. 36 size, PSR 55 Signage-A Informative Signage of Sandstone/Marble of size (1200x2100)MMvisibly from both side, PSR 56 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab except colour of Black, Cherry/Ruby Red or equivalent 57 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent 58 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. 59 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. 60 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 61 Supplying, fixing and commissioning of Hydraulic (Retractable) Bollards as per specification 62 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 63 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 64 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 65 Labour rate for the mentioned item. Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Double arm bracket 1 Mtr length in 1:2:4 RCC foundationbolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. 66 Providing & fixing ofConcrete Drain Covers Sandstone Colour550X750X50MM Colour: Sandstone Ultra High Performance Pigmented Concrete With Steel Fiber Reinforcement Load Capacity Suitable for 10 Tonne Pigmented Concrete Bayferrox Lanxess Fe203 Colour Index 77491.0000etc all complete in direction of engineer in charge 67 Providing & fixing of Concrete drain cover Concrete Drain Covers Sandstone Colour 550X750X50MM Ultra High Performance Pigmented Concrete With Steel Fiber Reinforcement Load Capacity Suitable for 40 Tonne Vehicle Passing Bayferrox Lanxess Fe203 Colour Index 77491.0000 etc all complete in direction of engineer in charge 68 Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fastenersat both ends. The work shall be executed as perdrawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job.The barricading shall not be removed without prior approval of Engineerin- Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work). 69 PLUMBING OF AREA- HAZRATGANJ NAJA MARKET ROAD, PLAZA, CHAURAHA, TRILOKNATH ROAD , CAPPER ROAD, DR. SOUJA ROAD, DAYNIDHAN ROAD - PLACEMAKING AND REDEVELOPMENT 70 SANITARY FIXTURES & ACCESSORIES 71 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. 72 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White 73 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require 74 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 75 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 76 32 mm dia (for wash basin) 77 Providing & Fixing 600 X 450 mm bevelled edge mirror of superiorglass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 78 Providing & fixingtoilet paper holder. C.P. Brass 79 WATER SUPPLY PIPES AND FITTINGS 80 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. 81 Internal work exposed on wall 82 40mm nominal outer dia pipes 83 50mm nominal outer dia pipes 84 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. 85 Concealed work including cutting chase and making good the wall etc. 86 15mm nominal outer dia pipes 87 20mm nominal outer dia pipes 88 25mm nominal outer dia pipes 89 32mm nominal outer dia pipes 90 Providing & fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) 91 40 mm nominal bore 92 50 mm nominal bore 93 Providing&fixing15 mm nominal bore45 cm long unplasticised PVC connection pipewith brass unions.45 cm length: 15mm nominal bore 94 Providing & fixing 15 mm nominal bore CP brass bib cockof approved quality conformingtoIS 8931. 95 Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved qualityconforming to IS standardsandweighing notlessthan 810 gms. 96 Providing & fixing 15 mm nominal bore C.P. brassstop cock (concealed)of standard designandof approvedmakeconforming to IS : 8931. 97 Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conformingto IS8931. 98 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern 99 Constructing brick masonry chamber 300 x 300x500mm, insidewithF.P.S. brick work in cement mortar 1: 4 (1 cement : 4 coarse sand) for StopCock, withC. I. surface box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4mix (1cement : 2 coarse sand:4 grade stone aggregate 20mm nominal size); necessary excavation, foundationconcrete 1:5:10 (1 cement :5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar1 : 3 (1 cement : 3 coarse sand )12mmthick finished with a floatingcoatof neat cementcomplete as per standard design 100 Providing and fixing square mouthS. W. Gully trapgrade `A complete with C.I. gratingbrickmasonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 101 150 x 100 mm. size P type 102 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms 103 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. 104 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 105 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. 106 PN - 10 Pipe, 50 mm OD (SDR-11) 107 PN - 10 Pipe, 75 mm OD (SDR-11) 108 PN - 10 Pipe, 110 mm OD (SDR-11) 109 TOTAL ( SCHEDULED ITEM ) 110 PART B(NON SCHEDULED ITEMS - AS PER MARKET RATES) 111 SUPPLYOFSANITARY FIXTURES, ACCESSORIESANDBATHROOMFITTINGS 112 Providing & fixing of white vitreous china urinal partition for half stall urinals. (Jaquar or equivalent) 113 Providing & fixing UPVC Floor trap of self cleansing designwith CP Jalicomplete in all respects. (Make : Supreme / Finolex / Prince) 114 P-Trap type Floor Trap 110 x 75 mm 115 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. 116 Providing & fixing 50 mm. dia. G.I elbow (drain point) in the toilet floor including50 mm dia. C.P. waste jali complete as required. 117 C. INTERNAL ELECTRICAL WORKS -HAZRATGANJ NAJA MARKET ROAD, PLAZA, CHAURAHA, TRILOKNATH ROAD , CAPPER ROAD, DR. SOUJA ROAD, DAYNIDHAN ROAD - PLACEMAKING AND REDEVELOPMENT 118 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 119 Group A 120 Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed steel conduit as required 121 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 122 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 123 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 124 2 X 16 sq. mm + 1 X 6 sq. mm earth wire 125 Supply and drawing co-axal TV cable RG-6 Grade, 07 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PCV sheath in the axisting surface/recessed steel/PVC conduite as required. 126 1 Pair, 0.5mm dia annealed copper conductor, FRLS PVC insulated, unarmoured, Telephone cable 127 Supplying and fixing following Suitable size GI Box with Moudular plate and cover infront on surface or recess, including providing and fixing 2 nos 3 pin 5/6 A moduler socket outlet and 2 nos. 5/6 A moduler switch, connection etc. as required. ( for light pluges to be used in non residentions, painting etc. as required. 128 Supplying and fixing following Suitable size GI Box with Moudular plat and cover infront on surface or recess, including providing and fixing 25 A moduler socket outlet and 25 A moduler SP MCB C Curve including connections, painting etc. as required. 129 Supplying and fixing PVC batten/ angle holder including connections etc as required. 130 Supply and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 131 5/6 A Switch 132 2 way 5/6 A switch 133 Telephone socket outlet 134 TV Antenna socket outlet 135 Bell Push 136 Supplying and fixing following size/ modules, GI box along withmodular base & cover plate for modular switches in recess etc as required. 137 1 or 2 Module (75mmX75mm) 138 3 Module 100mmX75mm) 139 4 Module 125mmX75mm) 140 6 Module 200mmX75mm) 141 8 Module 125mmX125mm) 142 12 Module 200mmX150mm) 143 Supplying and fixing following modular base & cover plate on existing moduler metal boxes etc. as required. 144 1 or 2 Module 145 3 Module 146 4 Module 147 6 Module 148 8 Module 149 12 Module 150 Supplying and fixing of following sizes of pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 151 25mm 152 32mm 153 Supply, installation, testing and commissioning of 1200mm sweep, BEE 5 Star rated, ceiling fan with brush less direct current (BLDC) Motor, class of insulation: B, 3 nos. Blades 30cm long down rod, 2 nos, canopies shackle kit, safety rope, copper winding, power factor not less than 0.9 service value (CM/M/W) Minimum 6.00, air delivery minimus 210 cm/min 350 rpm (tolerance as per IS:374-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washer, temperaure rise = 75Degree C (max.), insulation resistance more than 2 mega ohm, Suitable for 230 V, 50Hz single phase AC supply, earthing etc. Complete as required. 154 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as 155 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. asrequired. 156 Supply and fixing call bell/Buzzer suitable for single phase,230V, Complete as required. 157 Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. 158 Supplying and fixing following way, Horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator) 159 4 way(4+12) , Double door 160 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 161 16 way , Double door 162 Supply andfixing following rating, double pole, 240 V isolator in the existing MCB DB complete with connection, testing and commissioning etc. as required. 163 40 A 164 Supply andfixing following rating, four pole, 415 V isolator in the existing MCB DB complete with connection, testing and commissioning etc. as required. 165 63 A 166 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 167 Single Pole 168 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 169 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe et 170 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as 171 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 172 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 173 PART B - NON - SCHEDULED ITEMS (AS PER MARKET RATES ) 174 Supply & erection of AC 230/250 volts 50 hz Exhaust fans including provding nut bolts mounting frame and other accessories including connection etc complete as required as per direction of E /I make:- Havells / Cromption / USHA 175 300 mm Sweep 900 RPM 176 Supply & fixing of following white RJ 45 cat 6 data outlet / information outlet ETL verified to meet exceed TIA / ETA 177 Supply & fixing of following Telephone outlet 178 Supply & installation of CCTV / Suvillance system. (Honeywell 20 channel NVR full HD IP based- 01 nos, IP Honeywell dome camera 2MP with night vision- 8 nos., IP Honeywell 2 MP HD Bullet camera with night vision- 8 nos.) 179 Supply of LED Tube Light with batten suitable for up to 1X22 watt LED tube light fitting complete, including tube on surface complete in all respect. 180 1 X 22 W 181 Supply ofrecess/Surface/Pendent mounting round 12 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respects. (Make: Wipro) 182 LED Fancy Gate Light, Aluminium, 12 W 183 Earth work in excavation bymechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge.All kinds of soil 184 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5kmalso includingrammingandwateringoftheearthinlayersnot exceeding20cmintrenches,plinth,sidesoffoundationetc.complete. 185 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 186 Providingandlayinginpositioncementconcreteofspecified grade excluding the cost of centering and shuttering - All work uptoplinthlevel:1:3:6(1Cement:3coarsesand(zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) 187 Brick work with common burnt clay F.P.S. (non modular) bricks of class -150 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) 188 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in- charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mixor bear the cost of extra cement. M-25 Grade Concrete 189 SteelreinforcementforR.C.C.workincludingstraightening, cutting,bending,placinginpositionandbindingallcomplete Thermo-Mechanically Treated bars of grade Fe-500D or more 190 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 191 Providingandapplyingwhitecementbasedputtyofaverage thickness1 mm, of approved brandand manufacturer,over the plasteredwallsurfacetopreparethesurfaceevenandsmooth 192 Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied@ 2.20kg/10 sqm 193 ProvidingandlayingfactorymadechamferededgeCement Concretepaverblocksin footpath, parks,lawns, driveways or light trafficparking etc,of requiredstrength, thickness& size/ shape, made by table vibratory method using PU mould, laid in requiredcolour&patternover50mmthickcompactedbedof sand, compacting and proper embedding/laying of inter locking paverblocksintothesandbeddinglayerthroughvibratory compactionby usingplatevibrator,fillingthe jointswithsand andcuttingofpaverblocksasperrequiredsizeandpattern, finishing and sweeping extra sand. complete all as per directionof Engineer-in-Charge. 194 60mm thick cement concrete paver block of M-35 gradewith approved colour, design & pattern (Square and Rectangular shape) 195 80mmthickC.C.paverblockofM-35gradewithapproved color design and pattern.(Square and Rectangular shape) 196 Providing and laying matt finished vitrified tile of size 100x100x16mmhavingwaterabsorptionlessthan0.5%and conformingtoIS:15622ofapprovedmakeinallcoloursand shadesinoutdoorfloorssuchasfootpath,courtyardmulti modelsetc.,laidon20mmthickbaseofcementmortar1:4 (1cement:4coarsesand)inallshapes&patternsincluding groutingthejointswithwhitecementmixedwithmatching pigments etc. complete as direction of Engineer-in-Charge. 197 Providingandlayinginpositonreadymixedorsitebatched design mix cement concrete for reinforcedcement concrete work; using coarse aggregate and aggregate derived from natural sources,PortlandPozzolana/OrdinaryPortland/PortlandSlag cement,admixtures in recommended proportons as per IS:9103 to accelerate / retard sieving of concrete, to improve durability and workabilitywithoutimpairingstrength;includingpumpingof concretetositeoflaying,curing,carriageforallleads;but excludingthecostofcentering,shufering,fnishing andreinforcementasperdirectonoftheengineer-in-charge;for the following grades of concrete.Note: Extra cement up to 10% of the minimumspecified cement content in design mix shall be payableseparately.Incasethecementcontentindesignmix ismore than 110% of the specified minimum cementcontent, the contractor shall have discreton to eitherre-design the mix or bear the costofextracementConcreteofM25gradewithminimum cement contentof 330 kg /cumOne CubicMetreConcrete of M30 grade with minimum cement contentof 350 kg /cumOne CubicMetreConcrete of M35 grade with minimum cement contentof370kg/cumOneCubicMetreConcreteofM40grade with minimum cement contentof 390 kg /cumOne CubicMetreConcrete of M50 198 Concrete of M30 grade with minimum cement contentof 350 kg 199 Applying stamping finsh of the top surface of freshlylaid plain / reinforced cement concrete of specifedgrade in portco, side walks, drive ways, pool decks andopen yard as per directon of the Engineer-in-Charge.* The concrete shall be placed and screened to thefnished grade and •oated to the uniform surface byusing standard fnishing techniques. approved colorhardener @2.7 kg/sqm shall be applied evenly to thesurface of the fresh concrete by the dry shake methodby sprinkling in twoor more shakes foated aer eachshake and trowel only after final coating. The approved released agent @ 0.113 Kg/Sqm shall be applied evenly to the trowelled surface before stamping or the said release agent can be applied to the fexiblepolyurethene stamp moulds of approved design and inrequired sizes to achieve fnal stamping pattern. These stampings shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufcient size and weight to leave properstamp marks and the process repeated for the remaining concrete surface till the whole surface to bestamped is completed within the time while the concrete is in plastic stage of setting.After stamping, the curing shall be done as permanufacturers specifcatons. After inital curing theimprinted joints shall be grouted using cement slurrymixed with color hardener as per the requirement. Thesurface shall be sealed by applying acrylic based sealernot less than 0.167 litre/Sqm on fnished surf The constructon joints shall be provided by grovecutting of size 4 mm x 20 mm in panel size 3 m x 3 m orlesser as per the site conditons and flling the samewith 10 mm baker rod and providing & laying (PU)Polyurethane based joint sealer of approved make asper manufacturer’s specifcatons and fnished byapplying polyurethene resin based topprotectve clearcoat of minimum 80 micron applied with rollers onproperly cured and dry clean surface. (The cost ofconcrete for flooring is not included in the item, whichshall be paid for seperately).One SquareMetreSupplying and laying of Uni-Axial Woven PolysterGeogrid conforming to MORTH 3100 and IRC113, as soilreinforcement/basal reinforcement includingaccessories like te-strips, nuts & bolts and loops/lugsfor joining reinforcing elements with the facia pannels,overlaps and other protectve elements for synthetcgeo-grids and all other actvites required for reinforcedsoil walls, slopes etc complete as per designrequirements, manufacturer specifcatons and as perdirecton of engineer-in- charge.Uni Axial Woven polyster geogrid of minimum tensilestrength 40KN/m in the Longitudinal directon and 20KN/m in the Transverse directon.One SquareMetre 200 62mmthickcementconcreteflooringwithconcretehardener topping,underlayer50mmthickcementconcrete1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)andtoplayer12mmthickcementhardenerconsistingof mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’sspecifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 201 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 202 Supplying & Laying of Precast Saucer Drain 150 thick 300 mm wideinluding sand bed etc all complete in direction of engineer in charge 203 Providing and laying at or near ground level factory made kerb stone of M- 25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 204 Providing, laying and making kerbchannel 30cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the topsmoothetc.completeandasperdirectionofEngineer-in- 205 Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and fillingwith150mmthickjamunasand,includingspreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. 206 Providing andfixing10x10x10cmGranitestoneblockhandcut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mmwidefilledwithsamemortarincludingruledpointingetc. complete as per direction of engineer-in-charge. 207 Providing and laying Polished Granite stone flooring in required design and patterns,inlinearas wellas curvilinearportionsof the building all complete as per the architectural drawings with 18mmthickstoneslabover20mm(average)thickbaseof cementmortar1:4(1cement:4coarsesand)laidandjointed with cement slurry and pointing with white cement slurry admixedwithpigmentofmatchingshadeincludingrubbing, curingandpolishingetc. all completeas specified andas directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent 208 ProvidingandlayingflamedfinishGranitestoneflooringin requireddesignandpatterns,inlinearaswellascurvilinear portionsofthebuildingallcompleteasperthearchitectural drawingswith18mmthickstoneslabover20mm(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointedwith cementslurry and pointing withwhite cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and asdirectedbytheEngineer-in-Charge:Flamedfinishgranite stoneslabJetBlack,CherryRed,EliteBrown,CatEyeor equivalent 209 Painting runway/taxi track/apron marking with adequatenos of coats to give uniform finish with road marking paint of superior makeasapprovedbytheEngineer-in-charge,i/ccleaningthe surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out complete.New work (Two or more coats) 210 Layingoldcementcocreteinterlockingpaverblocksofany design/shapelaidin requiredline,level,curvature,colourand pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer in-charge. (Old CC paver blocksshall be supplied by the department free of cost). 211 Layingatorneargroundleveloldkerbstonesofalltypesin positiontotherequiredline,levelandcurvature,jointedwith cement mortar 1:3 (1 cement : 3 coarse sand), including making jointswithorwithoutgrooves(thicknessofjoints,exceptat sharpcurve,shallnotbemorethan5mm),includingmaking drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shallbemeasuredforpayment).(Oldkerbstonesshallbe supplied by the department free of cost) 212 Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fastenersat both ends. The work shall be executed as perdrawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job.The barricading shall not be removed without prior approval of Engineerin- Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work). 213 Centeringandshutteringincludingstrutting,proppingetc.andremoval of form for 214 Walls(anythickness)includingattachedpilasters,butteresses,plinth and string courses etc. 215 Providing&fixingofcementconcreteBollardsM-30GradeR.C.C.150mmdiaincludinggoutinginfoundation750mm height including all necessary T&P etc all complete in directio of 216 Repairing of Existing Canopy including PPGL Sheet & necessarymember &Screw,nut, bolts,washer ,including paintingpolishingetcallcompleteindirectionofengineerin charge. 217 Boring/drillingborewellofrequireddia for casing/ strainer pipe, by suitable methodprescribedinIS:2800(partI), including collecting samples from different strata, preparing and submitting stratachart/borelog,includinghire& running charges of all equipments, tools, plants&machineriesrequiredforthe job, all complete as per direction of Engineer-in-charge,upto90metredepth below ground level. 218 300 mm dia 219 Supplying, assembling, lowering and fixinginverticalpositioninborewell, unplasticizedPVCmediumwellcasing (CM) pipe of required dia, conforming to IS:12818,includingrequiredhireand labourcharges,fittings&accessories etc.allcomplete,foralldepths,asper direction of Engineer -in-charge. 220 150 mm nominal size dia 221 Supplying, assembling, lowering and fixinginverticalpositioninborewell unplasticizedPVCmediumwellscreen (RMS) pipes with ribs, conforming to IS: 12818, includinghire & labour charges, fittings&accessoriesetc.allcomplete, for all depths, as per direction ofEngineer-in-charge. 222 150 mm nominal size dia 223 Gravelpackingintubewellconstruction inaccordancewithIS:4097,including providing gravel fine/ medium/ coarse, in requiredgrading&sizesasperactual requirement,allcompleteasper direction of Engineer-in-charge. 224 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit) 225 withrequiredcapacityaircompressor, running the compressor for required timetill wellis fullydeveloped, measuringyieldofwellby“V”notch methodorany otherapprovedmethod, measuring static level & draw down etc. bystepdrawdownmethod,collecting water samples & getting tested in approvedlaboratory,i/cdisinfectionof tubewell,allcomplete,includinghire& labourchargesofaircompressor,tools & accessories etc., all as per requirement and direction of Engineer-incharge. 226 Providingandfixingsuitablesize threadedmildsteelcaporspotwelded platetothetopofborewellhousing/ casing pipe, removable as per requirement, all complete for borewell of 227 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm 228 ProvidingandfixingBailplug/Bottom plug of required dia to the bottom of pipe assemblyoftubewellasperIS:2800 (part I). 150 mm dia. 229 Supplyofsubmersiblepumpofmake KSB / Crompton / kirloskar 7.5HP with control panel, support wire etc. 230 Supply and laying of aluminium conductorPVCinsulatedarmoured served sheathed cables 1100 Volts grade ata depth of 750 mm below groundleveloveracushionof75mm. thick sand all around and protectedwithburntbricksonsidesandontop. Onsurfacethecablerunshallbe fixed onM.S.clampsetc.ofsuitablesizeor asdirectedbytheEngineer-Incharge, complete in allrespect. The armouring of the cable shallbeproperly connectedwiththe earthonductor by clamps etc.submersibble cable from pump panel to 231 Providing and fixing G.I. pipes complete with G.I. fittings includingtrenching and refilling etc. 32 mm dia nominal bore 232 Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) 233 Supply of 100mm dia Johnson screen. 234 Providing and stacking of Nyctanthes arbor- tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer- 235 Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. 236 Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of 237 Providing and stacking of Ficus panda of height 90-105cm.with10-12branchesandhealthy foliage,wellformedincementpotsofsize30 cm as per direction of the officer-in-charge.. 238 Providing and stacking of Ficus reginald well branched, bushy of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer- 239 Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushtyshape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.. 240 Providing and stacking of Tradescantia zebrina having in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 241 Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size ofPoly bags & as per direction of the officer-in- 242 Providing and stacking of Asparagus sprengeri of height 15 cm to 20 cm, full of leafy branches in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.. 243 Providing and stacking of Ophiopogon jaburan ( variegated ), full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. 244 Providing and displaying of Croton Petra Bangalore variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer- 245 Making tree guard 53 cm dia and 1.3 m high as per design from empty coal tar drums, supplied free by the department, including providing and fixing 2 nos M.S. sheet rings 50 x 0.5 mm fixed withrivetscompleteinallrespectsincluding painting inside and outside of tree guard with: Two or more coats of synthetic enamel paint of approved quality shade over a priming coat 246 Trenching in ordinary soil up to required depth includingremovalandstackingofserviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clodsetc.andmakingthetrenchedareawith designedmounds,pathsandsittingspacesetc. toproperlevelsbyfillingwithearthorearth mixed with manure and properly watering completeworkinrequiredtopographyasperdrawing & specifications. 247 Supplyingandstackingofgoodearthatsite includingroyaltybutincludingcarriage 20 km (earthmeasusredinstackswillbereducedby 248 Supplyingandstackingatsitedumpmanure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment) 249 Mixing earth and manure in specified proportion or as directed. 250 Roughdressingthetrenchedgroundincluding breaking the clods. 251 Fine dressing the ground 252 Spreadingof mixedgoodearthandmanurein specifiedproportionsasaboveandinrequired thickness. 253 Providing&layingSelectionno.1grassturf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothenandlightwateringthesame,asperdirection of officer in charge 254 Preparation of mounds of various size and shape by available excavated / supplied earth in layers notexceeding20cmindepth,breakingclods, wateringofeachlayer,dressing etc.,leadupto 50meterandliftupto1.5mcompleteasper direction of Officer-in-charge. 255 Excavating,supplying andfilling oflocal earth (including royalty) by mechanical transport upto a lead of 5km alsoincluding rammingand watering of the earth in layers not exceeding 20 cm in trenches, plinth, 256 Providing & Laying reinforced cement concrete pipe NP3 for Planter 600mm height and 300 mm depth in ground including excavation, protection work, backfilling, concrete and masonary works all complete in direction of engineer in charge. 257 Fabrication , supply and installation of Stainless steel 304 grade canopy around the existing tree guard with laser cut SS -304 grade fins with satin finish and 10mm thick polycarbonate multiwall sheet on roof from sabic plastic products or equivalent complete in all respect along with it aluminum fittings . SS-304 grade tree grate with laser cut design cutout patterns for waterpenetration will be fixed at the center and 18mm thick gang saw cut mirror polished granite/wood plastic composite wooden planks will be fixed ontop of the existing masionary in a curve shape 258 Cement Concrete Planter 259 D & E .( HORTICULTURE AND EXTERNAL ELECTRICAL WORK)-HAZRATGANJ NAJA MARKET ROAD, PLAZA, CHAURAHA, TRILOKNATH ROAD , CAPPER ROAD, DR. SOUJA ROAD, DAYNIDHAN ROAD - PLACEMAKING AND REDEVELOPMENT BILL OF QUANTITY 260 Part G (Horticulture Work) 261 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 262 Supplying and stacking of good earth at site including royalty and carriage upto 20 km lead complete (earth measured in stacks will be reduced by 20% for payment). Analysed Rate. 263 Extra For levelling and neatly dressing of disposed soil completely as per the engineer in charge DSR2023; 2.36 264 Supply and laying of bi axial extruded high modulus polypropylene geo grid conforming to MORTH specifications for base/sub base reinforcement having minimum tensile strength 40 Kn.m IN THE LONGITUDNAL AND TRANSEVERSE DIRESTION, WITH 14 Kn/ M AND 28 Kn/M AND 28 Kn/M TENSILE STRENTGH at 2% and 5 % strain respectively in the longitudnal and transverse direstion, junction eficiency not less than 95% and with 38 mmx 38 mm mesh opening psrLDA Approved 265 Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment).DSR Horticulture 2020; 2.25 266 Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge DSR Horticulture 2020; 2.9 267 Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).DSR Horticulture 2020; 2.8 268 Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, byspreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).DSR Horticulture 2020; 2.1 269 Rough dressing the trenched ground including breaking clods.DSR Horticulture 2020; 2.6 270 Fine dressing of the ground., DSR Horticulture 2020; 2.7 271 Providing & laying Selection no. 1 doob grass turf with earth 50mm to60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge DSR Horticulture 2020; 2.34 272 Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately): In rows 5 cm apart in both directions DSR Horticulture 2020/ 2.10.1 273 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)Holes 60 cm dia, and 60 cm deep. DSR Horticulture 2020; 2.14.4 274 Holes 45 cm dia, and 45 cm deep., DSR Horticulture 2020; 2.14.5 275 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal ofunserveiceable material’s as per direction of officer in charge (excludingcast of plant & water). DSR Horticulture 2020; 2.57 276 Trees Plant, 2.57.1 277 Shrubs Plant, 2.57.2 278 Hedge Plant, 2.57.3 279 Providing and stacking of Clerodendrum inerme having ht. 25 cm to 30 cm multi branched in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge., DSR Horticulture 2020; 6.7 280 Providing and Displaying Acalypha red well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge., DSR Horticulture 2020; 5.3 281 Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge., DSR Horticulture 2020; 8.30 282 Providing and stacking Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. DSR Horticulture 2020; 9.8 283 Providing and stacking of Belamcanda chinensis of height 45-60 cm. branched in earthen pots of size 20 cm as per direction of the officer-in-charge. (Lepord lily), PSR LALBATTI 284 Providing and Displaying of Spathiphyllum (peace lily), having 15 cm to 25 cm ht. blooming stag with fresh & healthy foliage well developed in 15 cmof Earthen pot/plastic pot as per direction of officer-in-charge. DSR Horticulture 2020; 3.90 285 Providing and stacking of Syngonium (Butterfly) variegated with 2-3 suckers healthy foliagein Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge., DSR Horticulture 2020; 6.25 286 Shrubs/TREE Plant 287 Providing and stacking of Hamelia patens of height 60-75 cm. with 6-8 branches in poly bags of size 25 cm as per direction of the officer-in-charge.(DAR 2020 Hort - 8.32) based 288 Providing and stacking of Ficus panda of height 90-105 cm. with 10-12branches and healthy foliage, well formed in cement pots of size 30 cm asper direction of the officer-in-charge. (DAR 2020 Hort - 8.28) based 289 Trees Plant 290 Providing and stacking of Jacaranda mimosifolia of height 10-12 feetin big poly bags of size 18 as per direction of the officer-in-charge.PSR 291 Providing and stacking of Butea frondosa (Flame of Forest) healthy and multi branches of height 4-6 feet in big poly bags of size 18 as per direction of the officer-in-charge.PSR 292 Providing and stacking of Lagerstroemia Flaush (jarool) healthy and multi branches of ht.10-12 feet in Earthen pots of size 12 as per direction of the officer-in-charge. PSR 293 Providing and stacking of Tabebiua (Dolne smith) healthy and multi branches of ht.12-14 feet in Earthen pots of size 18 as per direction of the officer-in-charge. PSR 294 Providing and stacking of Terminalia Mentali healthy and multi branches of height 10-12. in big polybags of size 18 as per direction of the officer-in-charge. PSR 295 Providing and stacking of Plumeria alba healthy and multi branches of height 10-12 feet in big poly bags of size 18 as per direction of the officer-in-charge.PSR 296 Providing and stacking Nicodia of height6-8 feet with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.PSR 297 Providing and stacking Cassia Gluca of height 8-10 feetwith bushy healthy plant in 14 bags & as per direction of the officer-in-charge. PSR 298 Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.PSR 299 Supply and installation ofBamboo of Height 10-12 feet. In all work complete. Market RatePSR 300 (Irrigation) 301 Trenching and Back Filling. Sanctioned Rate. 302 Supply, Installation, laying & commissioning of 90 mm outer dia 6Kg/cm2 HDPE pipe. 33.01 (Jal Nigam Varanasi SOR) 303 Supply, Installation, laying & commissioning of 63 mm outer dia 6Kg/cm2 HDPE pipe. 33.01 (Jal Nigam Varanasi SOR) 304 Supply, Installation, laying & commissioning of HDPE Flange with tail piece, packing & nut bolt complete in all respect. Sanctioned rate 305 Supply, Installation, laying & commissioning Of reducer 90 mm to 63 mm outer dia 6Kg/cm2 HDPE pipe. Sanctioned rate 306 Supply, Installation, laying & commissioning Of ELBOW JOINT 90 DEGREE FOR 90 mm HDPE pipe. Sanctioned rate 307 Supply, Installation, laying & commissioning Of ELBOW JOINT 90 DEGREE FOR 63 mm HDPE pipe. Sanctioned rate 308 Supply, Installation, laying & commissioning Of TEE JOINT90 DEGREE FOR 90 mm HDPE pipe. Sanctioned rate 309 Supply, Installation, laying & commissioning Of TEE JOINT90 DEGREE FOR 63 mm HDPE pipe. Sanctioned rate 310 Supply, Installation, laying & commissioning Offor 63 mm TAIL PIECES. Market Rate 311 Supply, Installation, laying & commissioning of for 90 mm TAIL PIECES HDPE PIPES. Market Rate 312 Supply, Installation, laying & commissioning Of PRESSURE Gauge 2.5 size (Gyceryne). Market Rate 313 3 disc filter. Market Rate 314 2 disc filter. Market Rate 315 Thermos Temperature Controller wuth switch and socket .2 mm cable. Market Rate 316 Butt velding electric heating plate. Market Rate 317 3 CIbutterfly valve. Market Rate 318 2 CIbutterfly valve. Market Rate 319 SPRINKLERS 320 Supply, Installation, laying & commissioning of Service Saddle 3 inch x 1.25 inch. Sanctioned rate with bush 321 Supply, Installation, laying & commissioning of Service Saddle 2 inch x 1.25 inch. Sanctioned rate with bush 322 Supply, Installation, laying & commissioning of Swing Joint for 10 - 12 meter range 360 degree popup. Market Rate 323 Supply, Installation, laying & commissioning of Swing Joint for 3 - 4 meter range 360 degree popup. Market Rate 324 Supply, Installation, laying & commissioning of 25 mm outer dia 6Kg/cm2 CPVC pipe. Market Rate 325 Supply, Installation, laying & commissioning Of Ball Valve for 25 mm pipes. Market Rate 326 Supply, Installation & commissioning of pop sprinkler plastic make material with 3 - 4 meter range 360 degreesMR 327 Supply, Installation & commissioning of pop sprinkler plastic make material with 10- 12meter range 360 degrees. Market Rate 328 Engagement of Plumber for required work etc all complete as per direction of Engineer in charge. PWD SOR 2020-21/Labour Rates Chapter.Rs. 420.00+10%CP 329 Engagement of Labour for required work etc all complete as per direction of Engineer in charge. PWD SOR 2020-21/Labour Rates Chapter.Rs. 335.00+10%CP 330 4 - BORING 331 Boaring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS : 2800 part I, including collecting sample from different starta, preparing and submitting equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer In charge, up to 150 meter depth below ground level. 300 mm diaAll type of soil (DAR 23.2.1.1 based)Sanction Rate 332 Supply, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well casing (CM) pipe of required dia conforming to IS: 12818 including required hire and labour charges, fittings & accessories etc. all complete for all depths as per direction of Engineer in charge. 200 mm nominal size diaDAR No. 23.3.3 333 Supply, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818 including required hire and labour charges, fittings & accessories etc. all complete for all depths as per direction of Engineer in charge. 200 mm nominal size diaDAR No. 23.10.3 334 Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm in the recharge pit, over the existing layer of boulders, in required thickness for all leads & lifts all complete as per direction of Engineer in charge. DAR 23.6 335 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for bore well of: 200 mm dia. DAR No. 23.13.3 336 Providing & Fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS 2800 part - 1 including necessary bolts & nuts of required size complete. 200 mm clamp. DAR No. 23.14.3 337 Supply and fixing of pump set & composite electric panel for submersible kirloskar/ sons/ crompton openwell pumpset greeves make three phases 380-440 v 50 cycles supply with fountain bolts and 3 core 2.5 mm flat PVC flexible copper conductor double insulated submersible cable and 4 core 1.5 mm form fountain pool to fountain electric panel etc fountain pool to fountain electric panel etc. complete with internal wiring lighting system. 338 7.5 HP pump 339 Electric Panel Box 340 Supply and fixing of 3 HP single phase open well submersible pump set of 50 mm x 50 mm pipe size complete with all material, labour T&P etc all as per direction of Engineer in charge. (make kirloskar/ crompton/ KSB 341 Supply and fixing of 2.5 sqmm 3 core PVC insulated PVC shethed flate submersible cable pump with bare bunched copper conductor for submersible pump motor with 1100 volt grade ISI marked all complete as per direction of Engineer in charge.Sanctioned Rate 342 Arrangement of Plumber for 1 year maintenance. PWD SOR 2020-21 343 Horticulture Maintenance 24 months 344 Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers (whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.) Play grounds / Public parks Per Sqm (as per yard stick 1Mali =2.00Acre).DSR (Hort) 2020/2.40.5 345 Cutting of Hedge/Edge including removing of cut material, cleaning, hoeing of hedge/ edge bed watering, manureing & apply insecticides & fungicides etc. (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.DSR20202.2.36 346 Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 05 k.m. lead complete (cattle manure measured in stacks will reduced by 8% for Payment). DSR 2020 horti - 2.25 347 Supplying and stacking of good earth at site including royalty and carriage upto 15 km complete (earth measured in stacks will be reduced by 20% for payment). Analysed Rate. 348 Supply & stacking Urea 40% Nitrogen @160 kg per acre (as per yard stick of CPWD LDA SOR 2018-19/11.1 349 Supply & stacking DAP 50 kg per acre/year. LDA SOR 2018-19/11.2 350 Supply & Stacking Bone Meal/ Oil Cake(LDA SOR Horti 2018-19/11.3) 50 kg per acre/Year 351 Removal of garden waste by TATA 407 or equivalent including loading and unloading and carriage upto 1 km lead, complete disposal upto designated place as per direction of Officer in charge. DSR Horticulture 2020/2.60 based (Analysis Rate attached) 352 Part H (Electrical) 353 PART (X) 354 FOUNTAIN 355 SITC of Spray comprises of a Calyx Aerating in center flanked with Foam Jets on 4 corners of waterbody.Manifold/Pipework are made from Galvanised steel, B-class, make Jindal, ISI Mark with necessary accessories like flanges, sockets, stands etc. made of steel- galvanized. High quality rubber gaskets, nuts & bolts along with gunmetal control valves to adjust flow pressure.Proper completion of workAs per direction of E/IcFOR A 6 METER DIA WATERBODYPSR (36/G20/CE/23) 356 SITC of In Calyx Aerating Spray, water is sprayed in an inverted cone pattern withasmallcenterjet.Calyxnozzlemadeofaluminiumalloy– epoxycoated/StainlessSteel,centerjetnozzlemadeofbrass– chromeplated.Approx.heightofwatereffects:Calyx–1.25m heightX4.5mdia,CenterJet–3mheight. Proper completion of workAs per direction of E/Ic,FOR A 6 METER DIA WATERBODYPSR (36/G20/CE/23) 357 SITC of Foam jet nozzle, on ball joint, of1.25” orifice size. Nozzle made ofBrass- Chrome plated. Approx. height of water effects: 1.2m. Proper completion of workAs per direction of E/Ic, FOR A 6 METER DIA WATERBODYPSR (36/G20/CE/23) 358 Supply,Installation,TestingandCommissioningofLuminaries comprise of 12V LED lights (RGB). Complete light body made of Stainless steel 304 grade, total 27watt power leds. Toughened glass with seal.Stainless steel 304 grade cable gland. All external nuts and bolts are of Stainless steel 304 grade. Adjustable mounting bracket is made of Stainless steel 304 grade. IP 68 compliant. All in pool connections shall be fully waterproof. Make of Luminaries As per direction of E/Ic,FOR A 6 METER DIA WATERBODYPSR 359 SITCofMonoblocktypesubmersiblepumpset whit stainer/ filter ofFollowing Capacity(Threephase,50Hz,415-380VAC)propercompletion ofworkasperdirectionofE/Ic. Kirloskar/Crompton Greaves/KSB/Texmo. Suction filter for pump: Filter body & filter mesh made from AISI 304 standard stainless steel. As per direction of E/Ic 360 3 HP PSR 361 SITC of 1.1 kV grade double insulated copper flexible cable 2.5 sq.mm x 3 core for pumps,As per direction of E/IcPSR 362 SITC of 1.1 kV grade double insulated copper flexible cable 1.5 sq.mm x 4 core for lights, As per direction of E/Ic PSR 363 PSR Supply, Installation, Testing and commissioning of specialised Outdoor type Electric panel for fountain which include control arrangement for fountain, pumpset andRGB Sequencing lighting comprises of :1. Contactor 25 Amp- 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)2. DOL Starter - 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)3. Single Phase Preventer- 01 Nos (Make: Bentex/ Selec/ GIC or equivalent)4. Incomer Main Switch 20 Amp- 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)5. Overload Relay 6-12 Amp- 01 Nos (Make: L&T/ Schneider/ ABB/ BCH or equivalent)6. Fuse for motor 32 Amp- 03 Nos (Make: GE/ L&T or equivalent)7. MCB for Lights 6 Amp -01 Nos (Plaza/ Anchor/ ABB/ Havells/ Legrand or equivalent)8. Push Button On/ Off switches (Red/ Green)- 02 Nos. 9. Overload Indicator - 01 Nos (Make: Eaton/ Siemen or equivalent)10. Single Phase Indicator- 01 Nos (Make: Eaton/ Siemen or equivalent)11. 3 Phase indicator RGB- 01 Nos (Make: Eaton/ Siemen or equivalent)12.Voltmeter- 01 Nos. (Make: Motwane, Innova, Fluke or equivalent)13. Ampere Meter- 01 Nos (Make: Motwane, Innova, Fluke or equivalent)14. SMPS/ Transformer for lights- 01 Nos (Make: Meanwell/ Pheonix/ Omron or equivalent)15. RGB Lights controller- 01 Nos. (Make: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers)16. Internal Wiringsteel sheet 16 gauge paint finish enclosure with hinged front door with provision for incoming & outgoing cable entry. Outgoing ampere 10, size of panel - 3ft X 2ft X 1ft depth.As per direction of E/Ic PSR (36/G20/CE/23) 364 Supply of 4000mm Extruded Square aluminum pole (grade 6063) Sq. 150 x 3mm thickness with IP68 Connector.Bespoke laser cutting design of length 1400mm with 50W In-Built LED with controlled downward light emission options (customized) with SS fasteners, Pre treated epdm black gaskets. Die-cast aluminum mounting plate Sq.250 x 12mm thick with 4 elongated holes 38 x 19 to suit M16 bolts at PCD 180 with pure polyester powder coating. Fixed with Hot dip galvanized foundation bolt. Mechanical resistance should be minimum IK06. The Pole should be undergone pure polyester powder coating process & Acid treatment to ensure high corrosion resistance. On the top of the pole there will be built-in Spot Lights of 2 x 18W LED are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire > 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency >85%, power factor >0.9, THD <10%, Inbuilt Surge protection 6KV. Optical grade clear toughened glass diffuser of 4mm thickness with controlled downward light emission. Colour Temperature LED 3000K, 230-240Vac, CRI >80, MacAdam step 3. The driver should be inbuilt in the pole itself and maintenance can be done from the junction box itself. PDC aluminum service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope. The control gear tray is prewired with 2.5 Sq.mm cable,6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. Any other internal cables and connections shall not be covered in the scope of supply. The manufacturer should have Inhouse NABL accredited lab to check and provide correct photometry of the product. The make should be as per K-Lite Verbena Spot KL-4583/Wipro/Ligman 365 Supply and fixing of 3500mmsteel poles are made out of mild steel galvanized rebbed extrusion profile having bottom section dia125mm and upper section dia 81mm with cast iron embellishment e8The pole have a service window at bottom section wih heavy duty four way connector and a mcb. Mild steal base plate with four nos. mounting holes is fixed and welded with bottom section . pole is primer coated and polyurethene painted . POLES BPTH SIDE OF THE ROADS AT 10 METER CC DISTANCE. PSR - BEGUM HAZRAT MAHAL PARK 366 Supply and fixing of OVER 600mm long aluminium dia cast body post top is mounted at the top with polycarbonate diffuser and fitted with 40w led disc bis registered make philips , bajaj, twinkle, lustore, K LITEor equivalent repuateted make Quotation rates 367 S/E of G.I. wire on 8 to 4 SWG on pole/service bracket including binding etc. complete in all respects SI.No. 628/18. 368 S/W of submain with two Nos. of 2.5 Sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material Labour and T&P required for proper completion of the work as directed at site by E/I. SI. No. 289/18. 369 S/Fof40ATPNofAutomaticstreetlightcubiclecontrolpanelpaintedwithanti corrosivealkaliandacidproofpaintconsistingoftimeswitchTSO100serieswith contractors,HRCfuses,isolatingswitchmeteringinstrument& instrumentbox with CTs etc, in case of TPN, complete in all respect as per direction of Engineer-in-charge. SI. No. 807/18 e(ii). 370 S/L of following cable Al conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm with DWC Pipeapproved makeUPPPCL as per direction of E/I. complete in all respects. 501/2018. Approved Makes:- Gloster/ Polycab/ KEI/ SCI/ Havells PWD SOR 501 371 10 sq. mm 4 core 372 (a) 35 Sq.mm 3.5Core 373 (b) 16 Sq.mm 4 Core 374 (c) 70 Sq.mm 3.5 core 375 S/F of following size palm or pin type copper tin plated cable socket (Lug) to the cable leadinsulatingwithtapeandmakingconnectionscompleteinallrespectsasper direction of E/I.SI.No.504/SOR-18. 376 10 sq. mm 4 core 377 (a) 25 sq.mm. 378 (b) 50 sq.mm 379 (c) 16 sq.mm 380 S/B of earth rod 20mm dia into 2.5mtr long including G.I. wire 7/16 SWG to connect earth rod to earth clamp on pole 3.00 mtr long steel conduit to carry earth wire along the pole. A.R. Bond No.87/CE/EE(E/M)2021, Dated 09-11-2021 381 S/Fof6Ampto32Amp.SPMCB(10KA)Ccurvecompleteinallrespectasper direction of Engineer-in-charge. SI No. 1002/18. CAT-A. 382 Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountendon non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc.The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. ( Incoming 200 Amp. TPN-1 No Outgoing 100 Amp. TNP-2 Nos. Cat. B. Cubicle TypePWD SI No : 802 (a) 383 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swgand inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. PWD SI No :725 (A) 384 Supply and Laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) DWC HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required. DSR E&M 2022/14.161 385 Supply, Installation, testing & commissioning of Servo Stabilizerwith Isolation transformer 100KVA,3-phase servo voltage stabilizer with isolation transformer , oil cooled, Input 300-470 VAC, 4 Wire, 50 Hz, output: 400+/-1% with oil,suitable for UNBALANCED LOAD with automatic operation (outdoor type-IP 64).The stabilizer shall comply with the following requirement:: Regulation : +/- 10 %.: Over load & Short circuit protection.: Protection cut-off against Over/Under Voltage.: Single phase protection.: 3 nos. phase indication lamps. 386 PLINTH AREA RATES CPWD 2023, Supply installation , testing and commissioning of IP based CCTV system for building security comprising of PTZ/FIXED CAMERA, CABLING , RECORDING , DISPLAY SYSTEM HARDWARE SOFTWARE SUPPORT,FOR EXTERNAL SURVILLANCE 6.10.2 , FOR PLAZA AREA ONLY 387 Operation and maintenance for 1 years 388 PART (Y) 389 LFkkfir dh x;h ykbZVksa ds vuqj{k.k ,oa lapkyu dk dk;ZA 390 Providing of Trained Electricion With Tool Kit (As per PWD SOR/2020-202. For 18 months after DLP 391 Providing ofHelper Technicion (As per PWD SOR/2020-2021.For 18 months after DLP 392 PART-Z 393 H.T./L.T. work 394 S/Fofdoublepolestructurewith2nosS.T.poleforS/S 410SP-55 11 Mtr. longin1:3:6CC foundation 1/6 of pole length below G.I. and 30cm above G.I. 20cm thick around the pole with 2 nos. channel 125mmx75 mm one No. Chennel cross arm of 75mmX 40mm 2 No. 50X50X6mm sngle iron bracings with necessary nut bolts & packing pieces complete with painting as per direction of E/I.(PSR Bond No. 490/CE/2024) 395 S/F of 11 KV Pin insulator with G.I. Bolt /spindle nut etc. complete in all respects. (PSR Bond No. 490/CE/2024) 396 S/Fof11KVDiscinsulatorincludinggunfittingoncrossarm/clampsfixedonpole complete in all respects. (PSR Bond No. 490/CE/2024) 397 S/E of over head line with A.C.S.R. conductor on pole/service bracket including binding etc. complete in all respects. S.I.No-627/18. Racoon/Dog(PSR Bond No. 490/CE/2024) 398 S/F of M.S. Channel 75mmX40mm Vshape crossd arm for two No. pin insulator proper completion of work. (PSR Bond No. 490/CE/2024) 399 S/E of 11 K.V L.A. set of 3 wire. suitable for mounting on steel support complete in all respect as perdirection of E/I.(PSR Bond No. 490/CE/2024) 400 S/Eof11K.V.T.P.M.O.switchonpoleincludinghandlerodetc.completeinall respects as per direction of E/Ich.(PSR Bond No. 490/CE/2024) 401 S/E of 11 K.V. D.O. fuse set on pole complete in all respect as per direction of E/I.(PSR Bond No. 490/CE/2024) 402 Supply and laying of70 Sqmm 3 core 11 KV standered aluminium conductor XLPE(Cross linked polyethylene)insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connectedwith earth conductor by clamps etc. PWD SOR No : 506 (d) (PSR Bond No. 490/CE/2024) 403 S/F of 70 Sq.mm size 3 core XLPE 11 KV outdoor type jointing kitproper completion of work as per direction of E/I A.R. Make: Raycheme, Mahindra. (PSR Bond No. 490/CE/2024) 404 S/F of level 2 following capacity 11/0.433 K.V. Al’ wound conventional 50Hz 3 phase oil immersed naturally cooled distribution T/F confirming and with amendments there of, havinglosses as per BEE standered with all standard fittings, including first filling of oil complete in all respects, of make UPPCL/KESCO Approved (PSR Bond No. 490/CE/2024)(a) 63 KVA (A.R.) 405 Supply and burring of Safe Earthing Electrode T-19 Zn-Zinc Coated, Length 3000mm, outer pipe 48.4mm x 3.2mm, inner pipe 26.9mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 x 3 G.I. Strip will be extra)Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.S.I.No-726 B/18. 406 S/Lof25mmx3mmGIstripfromearthelectrodedirectlyinthegroundasrequired complete in all respect Item No 716 SOR-2018 407 Supply and fixing of 2 metres high cage fabricated with 3mm thick expanded metal fixed on 50mm x 50mm x 6mm angle iron frame having vertical members spaced at 1 to 1.25 mts and horizontal members spaced at 1 mt. The vertical members shall be grouted in floor and horizontal members in the wall to a depth of 300mm with ends forked. The cage shall have 2000mm x 1000mm size one leaf door with locking device having door frame fabricated with 35mm x 35mm x 6mm angle iron and 3mm expanded metal duly fixed with the cage member with hinges etc. The cage shall be painted with red oxide primer and synthetic enamel paint. The job includes all materials, labour, T&P etc. for proper completion ofwork. PWD SI No : 1142 408 S/L of followingsize G.I.B classpipe ata depthof 750mmbelow groundlevel as cable carrier as direction of E/Inch. (PSR Bond - 490/CE/2024)(a) 80 mm dia
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Uttar Pradesh View Result →
30.
Housing Urban and Rular Development #9493817 Technical Bid
Tender For Kareli - Nurulla Road to Askari Market Road Block C and Block D Housing Scheme and Nurulla Road from Mahavir Chauraha to Karamat Ki Chowki near Sasur Khedari River and also till the connecting road - Clearing grass and removal of rubbish upto a distance of 30 m outside the periphery of the area as per Technical Specification Clause 201. 3 Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 60 metres as per instructions of E-I-C. (By Mechanical means). 4 i) Cement Concrete 5 ii) Reinforced cement concrete/ R.B. 6 Dismantling of flexible pavements and disposal of dismantled material up to a lead of 100 m, stacking serviceable and unserviceable materials separately as per Technical specification Clause 202. Bituminous / Granular Courses (By Mechanical means) 7 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 8 Removing all type of Hume Pipes and Stacking within a lead of 1000 metres including T&P, Earthwork and Dismantling of Masonry Works. 9 (i) Up to 600 mm dia 10 Removal of telephone / Electric poles / Street light / Lamp post including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and up to a lead of 1000 metres and stacking the serviceable and unserviceable material separately 11 Disposal of moorum/building rubbish malba/ similar unserviceable, dismantled or waste material by mechanical transport Including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note- Item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more. 12 Dewatering using 10HP to 70HP diesel engine pump set including Hire charges, cost of Diesel, Engine oil, pump operator, labor charges, conveyance of pump set and fuel to site and back, loading, unloading and any other incidental charges etc., complete. (Hire charges for Diesel Pump set for 10 HP) 13 [B] Bill No. 2 - Earthworks 14 Excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and leading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections and transporting to the embankment location within all lifts and lead upto 1000m 15 Removal of unserviceable soil including excavation loading and disposal but excluding replacement by suitable soil which shall be paid separately as per clause 305 16 i) Lead upto 1000 M 17 ii) Lead upto 8000 M 18 Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out construction of shoring and bracing, removal of stumps and other deleterious matter dressing of sides and bottom, backfilling the excavation earth to the extent required and utilizing the remaining earth locally for road work. 19 Mechanical Means (Depth upto 1.5 m) 20 i) Excavation 21 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. 22 [C] Bill no. 3 - Development of Carriageway 23 Stabilization of in-situ (existing pavement crust) or soil or otherwise sub base/ base course up to the required depth by cold in-situ recycling using cement and chemical additives / otherwise: Providing pulverizing, spreading, milling and mixing of chemical additives at the appropriate rate as per job mix design in accordance with IRC-SP-72-2015 , IRC-37-2012 & 2018 and IRC SP 89 (part II) 2018. Cementitious additive @ rate of minimum 5 - 7% and CCS/CS additive should be spread on the existing pavement using a mobile truck mounted containerized cement/ additive spreader with micro processor controlled weighing and spreading system. The additive spreader shall have variable working width sufficient to cover whole pavement lane. The in-situ stabilization process shall be carried out by a mobile and self propelled stabilizer / reclaimer of working width of 2.4 m and with minimum engine horse power of 440 kw with a variable working depth up to 50 cm. The resultant stabilized mix then would be profiled to the required grade, level and thickness using motor grader and the mix would be compacted using 20 tonne pad foot roller in combination with smooth wheel roller to achieve desired proctor density as per IRC 37-2012 & 2018 and complete in all respect and curing with water as required including all materials, labour and machinery etc. The entire in-situ process would be carried out in single pass with milling and pulverising of damaged asphalt pavement / soil/ aggregates / soil-aggregate mixture to the desired depth and with simultaneous addition of additives and water with machine integrated spray bars fited on the wheeled self-propelled and vibratory pad foot roller to achieve the desired proctor density in all respects. The tandem roller be followed by Pneumatic Tyre Roller. The minimum unconfined compressive strength (UCS) of stabilized sub base/ base should be 4.5 to 7 MPa after 7 / 28 days of curing as per IRC-SP- 72-2015 , IRC-37-2012 & 2018 . Also durability aspects (wet-dry cycles) of stabilized sub base should be satisfied as per IRC 37-2012 & 2018 and IRC SP 89 (part II) 2018. The gradation mixes and materials should be as per IRC 37-2012 & 2018 and IRC SP 89 (part II) 2018. The train of equipments to be used are binder spreader- water Tanker- Additive Truck- Recycler- Padfoot Roller (20 Tonne) + Single Drum Compactor- Grader- Tandom Roller- Pneumatic TyreRoller (20 Tonne) 24 SAMI LAYERProviding and laying Stress Absorbing Membrane Interlayer (SAMI)/bitumen impregnated geotextile layer after clearing of the road surface geotextile conforming to physical requirements of claues 703-3, laid over a tack coat of paving grade Bitumen 80- 100 penetration, laid at the rate of 1.05 kg per sqm over thoroughly cleaned and repaired surface to provide a water resistance membrane and crack retarding layer paving fabric to be free of wrinkling and folding and to be laid before cooling of tack coat, brooming and rolling of surface with pneumatic roller to maximise paving fabric contact with pavement Surface. 25 Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (Tack Coat on Bituminous surfaces ) 26 Providing and laying 40mmthickBitumencarpete(B.C.) with 100-120 TPh hot mix plant producing and average output of 75 tonege par hour using crushed aggregates of specified grading premixed with bitumen binder(VG-30) @ 5.40% of mix as per MOST specification clause. etc all comp of work. 27 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from aggregat aggregate natural sources, Portland Pozzolana/Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall. be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 28 M.S. (TOR steel or plain) in plain work such as RCC or RB work including binding for proper shape and including supply of steel and its wastage bend, hooks and authorized overlapping shall be measured and including cost of binding wire. Excluding GST (SOR-504). 29 [D] Bill No. 4 - Pedestrian Infrastructure (Footpath) 30 Sand Filling in Foundation Trenches as per Drawing & Technical Specification and as per direction of Engineer-in-charge. (including beneath all paver blocks, cobble areas for levelling purpose, etc.) 31 Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. (PCC below all paving area, Kerb Channel, Road edge kerb, Table top, Property edge beam) 32 Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (by mix in place method) 33 i) For Grading-I Material 34 Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications, PCC Grade M30using batching plant transit mixer & manual placing(80 mm thickness) r & manual placingand giving broom finish. (PCC with broom finish thickness 80 mm) 35 Providing and laying 75mm thick M-30 grade batch mix cement concrete and Applying stamping finish to the top surface of freshly laid plain/ reinforced cement concrete of specified grade in porticos, sidewalks, driveways, pool decks and open yards as per direction of the Engineer-in-Charge. The process shall include the following:-The concrete shall be placed and screeded to the finished grade, and floated to a uniform surface by using standard finishing techniques. The approved color hardener @ 2.7 kg/sqm shall be applied evenly to the surface of the fresh concrete by the dry shake method by sprinkling in two or more shakes, floated after each shake and trowelled only after the final floating. The approved release agent @ 0.113 kg/sqm shall be applied evenly to the trowelled surface before stamping or the said release agent can be applied to the flexible polyurethane stamp moulds of approved design and in required sizes to achieve final stamped pattern. These stampings shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufficient size & weight to leave proper stamp marks and the process repeated for the remaining concrete surface till the hole surface to be stamped is completed within the time while concrete is in plastic stage of setting.After stamping, the curing shall be done as per manufactures specifications. After initial curing the imprinted joints shall be grouted using cement slurry mixed with color hardener as per theequirement. The surface shall be sealed by applying acrylic based sealer not less than 0.167 litre/sqm.on finished surface.The construction joints shall be provided by groove cutting of size 4mm x 20mm in panel size 3m x 3 m or lesser as per the site conditions and filling the same with 10 mm baker rod and providing and laying (PU) Polyurethane based joint sealer of approved make as per manufacturer’s specifications and finished by applying Polyurethane resin based top protective clear coat of minimum 80 micron applied with rollers on properly cured and dry clean surface. (Cost of concrete for flooring is not included in this item which shall be paid separately.) 36 80 mm thick C.C. paver block of M-35 grade with approved color design and pattern. 37 Supply and fixing of Tactile indicators made from SS-304 grade stainless steel. Warning Tactile indicator Shall be installed on the walking surface in a raised grid pattern of dots or stud. Minimum 36 studs to be placed in 300X300 mm area. Dimensions - 35mm Outer Dia x25mm Inner Dia, Stem Dia 8mmx12mm, Weight - 28grm.All the indicator will be installed into correctly drilled holes and place any suitable adhesive, All the indicators shall be aligned property, all complete as per direction of Engineer-in-charge. 38 Supply & fixing of Tactile indicators made from SS-304 grade stainless steel. Directorial Tactile indicator shall be installed on walking surface, consisting of a series of raised bar/strip. Min 4 bars/strip to be placed in direction perpendicular to distance of travel in 300X300 mm area. Dimensions-280mm L x 35mm W x 4.5mm, Stem Dia 8mmx12mm, Weight - 250grm All the indicator will be installed into correctly drilled holes and place any suitable adhesive, All the indicators shall be aligned property., all complete as per direction of Engineer-in-charge. 39 Providing and laying Tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colors and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge 40 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). (DSR-11.20) 41 Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge. (Saucer drain along the road edge, Curved Kerbs at Property Entry/Exit, Curved Kerbs at side roads) 42 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 43 CC Grade M20 using batching plant transit mixer & manual placing all complete as per direction of E-I-C. 44 [E] Bill No. 5 -Parking 45 Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (by mix in place method) 46 i) For Grading-I Material 47 Supplying and filling in plinth with sand under floors/in trenches, including watering, ramming, consolidating and dressing all complete with material (from source to site), labor and T&P etc. required for proper completion of the work. (Including Royalty). 48 Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days and giving broom finish. (PCC) 49 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-35 grade with approved color design and pattern. 50 [F] Bill No. 6 -Cycle track 51 Nil 52 [G] Bill No. 7 - Traffic Signs, Markings and Other Road Appurtenances 53 Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer[1]in-Charge.(Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work). 54 Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrile) or HIPS (High-impact Polystyrene) or Acrylonitrile Butadiene Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4260. The Reflective panels shall consist, of number of lenses containing single or dual prismatic cubes capable of providing total internal reflection of the light entering the lens face. Lenses shall be moulded of methyl methacrylate conforming to ASTM D788 of equivalent. The slop or retro-reflecting surface shall preferably ba 5+/.5 degree lo base and the area of each retro -reflecting surface shall not be less than 13.00 $Q.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel , to the Engineer . In addition , a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. In case the markers are, displaced , damaged . get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer , at his own cost. The rate shall include all materials, labor, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge, 55 RPM With Shank 56 Solar Power Road Marker The solar studs shall be made of aluminum alloy and polycarbonate material which shall be absolutely weather resistant and strong enough to support to load of 13,635 kg tested in accordance with ASTM D4280. Its color may be white, red, yellow, green or blue or combination as directed by the Engineer. Its water resistance shall meet the requirements of IP 65 in accordance with IS: 12063:1987 category 2 for the protection against water ingress. The dimensions of solar studs shall not be less than 100 mm * 100 mm * 10 mm. It shall have super bright LEDs so as the provide long visibility from a distance of more than 800 m. Its flashing rate shall not be less than 1 Hz. Its should be able to give the prescribed performance in the temperature range of -40 degree C to +55 degree C. Its life shall be not less than 3 Years. The rate shall include all material, labor, equipments, fabrication, transportation erection, installation and incidentals all complete as per direction of the engineer-in-charge 57 R.CC work (1:1.5:3) (M-20) with cement course sand &20mm the stone grit including all complete cement concrete with cement sand &20mm gauge stone Grit with the proportion of (1:1.5:3)including all complete the work (MORTH RA-12.8 C, Case-II) 58 M.S. or Iron work plain or Tor for RCC work including cutting, bending, rivetting or welding etc. where necessary. Excluding GST (S.I.No-504) 59 Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces 60 M.S. or Iron work of heavy sizes section such as Trusses, built up gates, record racks, roof work, gates etc. Including rivetting or welding where necessary. Excluding GST (S.I.No-503) 61 Painting of M.S. Grill with enamul paint etc all complete work. (S.I. 15.15 new item no.) 62 Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. 63 Providing and fixing of retro- reflectorized cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting type-IVvide clause 801.3, 2mm thick aluminum sheeting, 1.5 mm thick supported on mild steel angle iron post 75mm* 75mm *6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm* 45cm*60 cm, 60 cm below ground level as per the approved drawing. The retroreflective sheeting shall be tested for a certificate of having the sheeting coefficient of retro reflection, daytime, color and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoors weathering and its having passed these tests shall be obtained from international/ government laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should be also obtained from Indian condition within 3 years of launching ofproduct by the manufacturing abroad. Alternatively, a certificate conforming to ASTM specification (D4956-09) on Artificial accelerated weathering requirement from a reputed laboratory in India can be accepted provisionally. In such a situation , the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of 3 years outdoor weathering of the sheeting as per IRC 67:2012 . Legends, letters, numerals, and borders etc. should be as per MoRT&H specification 801.3.7. Proof of the same in form of government reports shall be uploaded while quoting tender. 64 90 cm equilateral triangle with diffinitation plate size (20cm x 60 cm) 65 60 cm equilateral triangle with diffinitation plate size (20cm x 60 cm) 66 60 cm circular with diffinitation plate size (20cm x 60 cm) 67 80mm x 60mm rectangularwith diffinitation plate size (20cm x 60 cm) 68 60 mm x 45 mm rectangularwith diffinitationplate size (20cm x 60 cm) 69 60cm x 60cm square with diffinitation plate size (20cm x 60 cm) 70 90 cm high octagon 71 Direction and place Identification signs up to 0.90 sqm size Board Providing and erecting direction and place identification retro-reflectorized sign as per IRC-67 made of high intensity grade sheeting The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime color and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/ Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals and borders etc. should be as per MoRT&H specification No-801.3.7. Sheet fixed over aluminum sheeting 2 mm thick with area not exceeding 0.9 sqm. Supported on a mild steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60cm., below ground level as per approved drawing, complete. 72 Direction and place Identification signs with size more than 0.90 sqm size BoardProviding and erecting direction and place identification retro-reflectorized sign as per IRC-67 made of high intensity grade sheeting The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime color and luminance, shrinkage, flexibility. liner removal, adhesion, Impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals and borders etc. should be as per MoRT&H specification No-801.3.7. Sheet fixed over aluminum sheeting 2 mm thick with area exceeding 0.9 sqm. Supported on a mild steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing, complete. 73 Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lense type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans & as per IRC :67 74 Brick Masonry Work in Cement Mortar 1:4 (1Cement: 4 Coarse Sand) in Foundation complete with Cement Concrete Bricks procured from C&D Waste Recycling Plant Baswar excluding Pointing and Plastering, as per Drawing and Technical Specifications. 75 Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 finerness modulus.SOR 2022 SI no574 76 12 mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement :3 sand)and as per direction of Engineer in charge. 77 Finishing walls with ready mixed Premium acrylic emulsion paint (company depot tinted) having Volatile Organic Compound (VOC)less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali, & fungal resistance, dirt resistance exterior paint of required shade with silicon additive(for painting wall, street furniture) New work (two or more coats applied @1.43 liter/10sqm over and including priming coat of exterior primer applied @ 0.90 liter/10 sqm) 78 Supplying and Fixing of cast iron antique style bench having weight of sides not less than 72 kg (36 kg each) fitted with fibre rectangle strip (should not be less than 50 mm X 25 mm and 1.6mm thick. Length of Bench should not be less than 6 ft (end to end of castiron support). 79 [H] Bill no. 8 - Utility and street light cabling 80 Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.(PCC below pipe of Storm water, Sewer, Water, Inspection chamber for storm water, telecom chamber, power chamber and sewer) 81 Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete (Storm water, sewer) 82 600 mm dia RCC pipes 83 Providing of 7- Way 40mm Multi Ducts with solid permanently solidly lubricated Silicone in inner layer for ICT fiber cables conforming to ASTM F 2160, ASTM D 2444 and /or equivalent Indian standard. External Sheathshall be in Orange Colorand shall be free from visual defects like blisters, shrink holes,flaking, scratches, groove lines & surface roughness. The color of the 7 nos. PLB HDPE ducts shall be Green, blue, yellow, Brown, violet, Grey , Red for differentiation. Outer sheet thicknessshall be 1.2mm +/-0.2mm. The inner surface of the multi channel ducts shall be spirally ribbed & shall be of a configuration for faster installation of cables. Wall thickness(mm) of each of the ducts Excluding rib height shall be 2.9mm +/- 0.3mm. ISO Requirements- ISO 9001, 14001, 18001, complete as per specifications and directions of Engineer-in-charge. (7 way multi utility duct for OFC) 84 Supply of HDPE pipe of size 110mm for distribution system conformingn to latest/ relevant I.S. 4984/1995 Specifications with all jointing materials and specials conforming to latest /relevant I.S. specifications including F.O.R. destination and all taxes and insurance etc. with loading, unloading and Carting up to site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignment and gradient and jointing etc. complete (including testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches) all complete as per instructions of Engineer-in-charge.110mm dia HDPE pipe PN-6 class PE-100 85 Supply of HDPE pipe of size 63mm for distribution system conformingn to latest/ relevant I.S. 4984/1995 Specifications with all jointing materials and specials conforming to latest /relevant I.S. specifications including F.O.R. destination and all taxes and insurance etc. with loading, unloading and Carting up to site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignment and gradient and jointing etc. complete (including testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches) all complete as per instructions of Engineer-in-charge.63mm dia HDPE pipe PN-6 class PE-100 86 RCC Grade M20 using batching plant transit mixer & manual placing ( Side wall, bottom slab for all inspection chamber i.e. storm water, telecom, power, sewer, water) 87 Supply and installation on site - Recessed double seal ofwith a clear opening of750*750 mm DI manhole cover and frame(material- ductile iron grade 500/7) of class B125 having minimum load capacity 125 KN Load as per EN124-2, the top cover( should have 2 no. of keyholes ) as per the design approved by Engineer in chargedesign approved by Engineer in charge. 88 Supply and installation on site - Recessed double seal ofwith a clear opening of750*750 mm DI manhole cover and frame(material- ductile iron grade 500/7) of class D400 having minimum load capacity 400 KN Load as per EN124-2, the top cover( should have 2 no. of keyholes ) as per the design approved by Engineer in chargedesign approved by Engineer in charge. (storm water) 89 Supply and fixing Gully Grates RED 048 GRH – 300* 750mm D.I. GULLY GRATE & FRAME IN D400 LOAD CLASS , as per BS EN 124 Black Bitumen Paint, all complete as per direction of Engineer-in-charge. 90 Constructing rcc rectangular type manholewith a floating coat of neat cement, foundation concrete 1:6:12mix (1 cement : 6 coarse sand : 12 graded brick bats 40 mm nominal size), and making necessary channel in cement concrete of M-25 grade finished with a floating coat of neat cement, all complete as per standard design and instruction of E-I-C. 91 Restoration of water pipeline in case of damage 92 [I] Bill no. 9 - Horticulture / Landscaping works 93 Trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications. 94 Supplying and stacking of good earth at site including royalty but including carriage1km (earth measusred in stacks will be reduced by 20% for payment). 95 Supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment) 96 Mixing earth and manure in specified proportion or as directed. 97 Rough dressing the trenched ground including breaking the clods. 98 Fine dressing the ground 99 Spreading ofmixed good earth and manure in specified proportions as above and in required thickness. 100 Uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation. 101 Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge 102 Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. 103 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth,sides of foundation etc. complete. 104 Providing and stacking of Nauclea cadamba (Kadam) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. 105 Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge. 106 Providing and stacking of Terminalia arjuna of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. 107 Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. 108 Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. 109 Providing and stacking of Ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge.. 110 Providing and stacking of Ficus reginald well branched, bushy of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.. 111 Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushtyshape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.. 112 Providing and stacking of Tradescantia zebrina having in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 113 Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size ofPoly bags & as per direction of the officer-in-charge. 114 Providing and stacking of Asparagus sprengeri of height 30 cm to 45 cm, full of leafy branches in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.. 115 Providing and stacking of Ophiopogon jaburan ( variegated ), full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. 116 Providing and displaying of Croton Petra Bangalore variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. 117 Providing and fixing MS iron tree guard 60 cm dia and 2 metre high above ground level formed of 4 Nos (25 x 6 mm) and 8 Nos (25 x 3 mm) vertical MS riveted to 3 Nos (25 x 6 mm) iron rings in two halves, bolted together with 8 mm dia and 30 mm long bolts including painting two coats with paint of approved brand over a coat of priming, complete in all respects. 118 Street Light Works (Excluding GST) 119 Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P complete in all respect 120 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect. Cat: AAA 121 Supply and laying of 16 sq.mm. 4 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 122 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/termination with GI thimble etc. as required. 123 Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia38mm terminal Dia 12 mm ,outer GIpipe of 16 SWG and inner GI pipe of 12 SWG withHot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. 124 Making Connection of each street light by S/L 1.5 sqmm FRLSH copper wire complete as per Direction of engineer in charge. 125 Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length each ) on RCC foundationincluding the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. 126 Supply & Laying of 63 mm Dia (OD-63 mm & ID- 51 mm Nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers, etc. conforming to IS 14930, part II complete with fitting and cutting, jointing, etc. direct in ground (75 cm below ground level) including excavation & refilling the trench but excluding sand cushioning & protective covering etc, complete as required. 127 Supply and fixing for automatic street light cubical control Juction Box painted with anti-corrosive alkali and acid proof pait consisting of 6 Amps MCB (B - Curve) complete in all respect 128 Supply and fixing of 16 sq.mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 129 Supply and fixing of 40 Amp. capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 130 Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. 131 Supply/ erection of surface mounted decorative pole 4500 mm long having Base plate 300x300x12 mm with the bottom dia 139 mm upto 1 mtr long with the thickness of 3.6 mm and the top dia is 76 mm upto 3.5 mtr. Log. Decorative pole made out of Galvanized iron tube with cast Aluminium embellishments. The poles are painted with Polyturetnane paint. The pole have service window at the bottom on the pole for housing the MCB and terminal strips and as per attached drawings. 132 S/F of Single Arm decorative Bracket 100 mm long made of Cast iron/ Aluminium embellishments painted with Polyturetnane paint. 133 Supply of LED decorative drop down light made of aluminium housing fitted with polycarbonate diffuser having 500 mm dia with 70 w. 134 Supplyandlayingof aluminiumconductorPVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core 135 Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 40 A TPN 136 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 16 sq. mm 137 Supply & Laying of 63 mm Dia (OD-63 mm & ID- 51 mm Nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers, etc. conforming to IS 14930, part II complete with fitting and cutting, jointing, etc. direct in ground (75 cm below ground level) including excavation & refilling the trench but excluding sand cushioning & protective covering etc, complete as required. 138 Supply and Laying 6 swg G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/termination with GI thimble etc. as required. 139 Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia38mm terminal Dia 12 mm ,outer GIpipe of 16 SWG and inner GI pipe of 12 SWG withHot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. 140 Part - B Utility Shifting (Including GST) 141 Converstion of LT Overhead Line by Underground LT Line 142 LT XLPE insulated cable of size 3.5x400 sqmm. 143 LT XLPE insulated cable of size 3.5x240 sqmm. 144 LT XLPE insulated cable of size 3.5x150 sqmm. 145 LT XLPE insulated cable of size 3.5x70 sqmm. 146 9 mtr long stp 147 HDPE Pipe 140mm dia PEB0, PN-6 148 HDPE Pipe 120 mm dia PEB0, PN-6 149 HDPE Pipe 75 mm dia P880, PN-6 150 Aluminium Crimping Lugs 400sqmm 151 Aluminium Crimping Lugs 240sqmm 152 Aluminium Crimping Lugs 150sqmm 153 Aluminium Crimping Lugs 70sqmm 154 6 SWG G.l. wire for earthing along cables. 155 Cable end termination using total double compression brass glands and crimping type Cu. Thimbles for 3.5x400 Sqmm. LT Cable 156 Cable end termination using total double compression brass glands and crimping type Cu. Thimbles for 3.5x240 Sqmm. LT Cable 157 Cable end termination using total double compression brass glands and crimping type Cu. Thimbles for 3.5x150 Sqmm. LT Cable 158 Cable end termination using total double compression brass glands and crimping type Cu. Thimbles for 3.5x70 Sqmm. LT Cable 159 MAIN LT PANEL AT SUB STATION- 400 KVA (Type A-2)lncomer- 1 Set of 800 Amp. TP MCCB with Spreader & Extended handleMetering on lncomer - 1 Set of Digital Ammeter with ASS- 1 Set of Digatal Voltmeter with VSS- 1 Set of LED type Phase lndicating Light (22.5 mm.)with Control MCBsOutgoing- 6 Set of 250 Amp. TP MCCB with Spreader & Extended handte( 5 Nos. + 1 No. for capacitor panel)- 2 Set of 100 Amp. TP MCCB with Spreader & Extended handle 160 MAIN LT PANEL AT SUB STATTON- 250 KVA (Type A-2) lncomer- 1 No. 630 Amp. TP MDO ACB with Inbuilt MPR Release with I onToff tnai.ating LightMetering on lncomer - 1 Set of Digital Ammeter with ASS- I Set olDigital Volt-meLer wirh VSS- 1 Set of LED type Phase Indicating Light (22.5 mm.J with Control MCBs Outgoing - 5 Set of 250 Amp. TP MCCB with Spreader & Exrended handle- 2 Set of 100 Amp. TP MCCB with Spreader & Extended handle flnstallation ofLT Distribution Boards for LT underground system (Type A,B&CJ) 161 Supply , installation, testing & commissioning of outdoor type feeder pillar panetto be made of 2 mm CRCA sheet and covers will be j.6mm CRCA sheet dulypowder coated paint with 300 amps Al. busbar. (Type-B2)lncomer - 250 Amp. TP MCCB - 1 No.Outgoing - 63 Amp. TP MCCB - 5 Nos.lnstallation of LT Distribution Boards forLT underground system (Type-A, B & C) 162 Outdoor type feeder pillar panel to be made of 2 mm CRCA sheet and covers will be 1.6mm CRCA sheet duly powder coated paint with 300 amps Al. busbar. [Type-B3] Incomer - 100 Amp. TP MCCB - 1 No. Outgoing - 63 Amp. TP MCCB - 4 Nos.lnstallation of LT Distribution Boards for LT qnderground system [Tvpe-A, B & Cl 163 Lockable distribution boxes of size 450X400mm with bus bar 100 Amp. TPN to feed upto 10 houses (Type C) 164 XLPE LT Service armoured Cable for single phase,2x6 sq. mm.(pVC armoured Consumer Service Cablel 165 XLPE LT Service armoured Cable for single phase,2x10 sq. mm.(pVC armoured Consumer Service CableJ 166 XLPE LT Service armoured Cable for three phase,4x10 sq. mm.[pVC armoured Consumer Service Cablel 167 XLPE LT Service armoured Cable for three phase,4x1.6 sq. mm.(pVC armoured Consumer Service Cablel 168 XLPE LT Service armoured Cable for three phase,4x25 sq. mm.(PVC armou[ed Consumer Service Cable) 169 PVC PIPE 32 MM DIA 170 PVC PIPE 50 MM DIA 171 Electronic KWH Meter 1PX2W with Box. For single phase consumer 172 Electronic KWH Meter 3PX4W Static meter with Box.For three phase consumer 173 carriage , Laying of 3.5Cx400 sq.mm size LT XLPE insulated cable underground in HDPE pipe size 140 mm dia. 174 carriage, Laying of 3.5Cx150/240 sq.mm size LT XLPE insulated cable underground in HDPE pipe size 1.20 mm dia. 175 carriage ,Laying of 3.5CX70 sq.mm size LT XLPE insulated cable underground in HDPE pipe size 75mm dia. 176 Painting of STP incuding paints [2 ltr red oxide and 2 Ltr Alluminum paint for each pole.l 177 Grouting of ST pole 178 CARTAGE , ERECTION AND DISMENTLING CHARGES 22% OF MATERIALS COST 179 Conversion of 11KV Overhead/Underground Line by 11KV Line Underground 180 11 Kv cable size 3x185 sq.mm XLPE 181 STP 11M-IS 410 SP-55 182 G.l pipe 4 dia 183 TOP channel 100x50x2240 mm 184 HDPE Pipe 160 mm dia PE 80, pN-6 185 Service clamp O/S 186 Clamp for fixing pipe to pole 187 11 Kv cable jointing kit size 3x185 sq.mm XLPE O/D 188 11 Kv cable jointing kit size 3x185 sq.mm XLPE S/T 189 Earthing complete. 190 M.S. Nut & Bolt with washer 191 Bracing angle 65x65x6x2700 mm with clamp 192 Stone Pad 193 Number plates with Clamp 194 Danger board & clamp with bolts & nuts 195 Stay complete 196 G I Barbed Wire 197 carriage , Layrng of 3X185 sq.mm size 11 KV XLPE insulated cable underground in HDPE pipe dia 160 mm. 198 Painting of STP incuding paints (2 Itr red oxide and Z Lt. Allrn inrm pal,1t for each pole.) 199 Grouting of ST pole 200 Grouting of Stay set 201 CARTAGE , ERECTION AND DISMENTLING CHARGES 22% OF MATERIALS COST 202 Conversion of 33KV Overhead/ Underground Line by 33KV Line underground 203 Cable Al. 3x300 sq.mm. XLPE 33 KV 204 STP 11M-IS 410 SP-55 205 G.l pipe 6 dia 206 M.S.Top channel 100x50x2240 mm 207 HDPE Pipe 200 mm dia PE 80, pN-6 208 Service clamp O/S 209 Clamp for fixing pipe to pole 210 Bracing angle 65x65x6x4300 mm with clamp 211 33 KV cable jointing kit 3X300 Se MM outdoor 212 33 KV cable jointing kit 3X300 Se MM Straight Through 213 Earthing of pole by MS earthing rod of 2OX25O0 mm & 6 SWG earthr.ng wire etc. 214 M.S. Nut & Bolt with washer 215 Number plates with Clamp 216 Danger board & clamp with bolts & nuts 217 Stay complete (Stay rod 15X1800mm, Stay wire 5 KG,, Stay clamp, Boult & nut rvith grouting 218 Daner bqard barbed wire includin jumpering 219 carriage , Layrng of 3X300 sq.mm size 33 KV XLPE insulated cable underground in HDPE pipe dia 200 mm. 220 Painting of STP incuding paints (2 Itr red oxide and Z Lt. Allrn inrm pal,1t for each pole.) 221 Grouting of ST pole 222 Grouting of Stay set 223 CARTAGE , ERECTION AND DISMENTLING CHARGES 22% OF MATERIALS COST 224 INSTALLATION OF 250 KVA TRANSFORMER ON DP FOR THE SHIFTING OF 3 No. 250 KVA. 9 No.400 KVA & 3 NO. 630 KVA TRANSFORMER 225 STP 11M-IS 410 SP-55 226 MS channel 100x50x2240 mm 227 SERVICE CLAMP FOR ROUND POLE 228 M.S. BOLT AND NUTS OFF SIZE WITH WASHER 229 L.T. CABLE 3.5OX4OO SO M 230 LTXLPE Insulated,Unarmoured Aluminium Singlc Corc Cable,1x240sq. mm.Sizc 231 LT XLPE Insulatcd,Unarmoured Aluminium Singlc Core Cablc,1x400 sq. mm.Size 232 EARTHING OF 250 KVA T/F WITH G.I. PIP[ 233 EARTHING ROD COMPLET. 234 1 1 KV D.O. FI]SE SETS 235 1 1 KV TPMO 236 D.D. WIRE 70 qs mm 237 250 KVA T/F 238 L.T. CUBICAL B0X complete 239 L,T. CABLE 3.50X240 SQ MM 240 STAY SET COMPLETE, 241 ALUMINIMUM LUG 70 SQMM 242 ALUMINIMUM LUG 240 SQMM 243 ALUMINIMUM LUG 400 SQMM 244 PVC TAPE 245 T/F BUSHING CONNECTOR OF COPPER STRIP 246 Labour , Cartage & Errection Charges and Dismentaling of existing T/F 247 Dismentling and Cartage from site to store Charges 7% (Other Misclenous Charges)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 4
Uttar Pradesh View Result →
31.
Housing Urban and Rular Development #9485192 Technical Bid
Supply And Fixing (Installation) Of Furniture At Jnv Phase-A Howrah (W.B) , School Building , Supply & Installation Big Desk (For Two Persons)-The Overall Dimensions Of Desk Will Be 1066Mm * 930Mm * Height 760Mm, Complete As Perspecifications Enclosed And Direction Of Engineer-In- Charge Having The Table Top Shall Be Made Up Of 18.0 Mm Thick Plywood Is 303 Of Mr Gradeosl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish). Table Top Dimensions Shall Be W 850 Mm X D 380 Mm. Edge Towards Benchshall Be Post Formed With Round Edge. The Remaining Three Edges Must Be Sealed With 2Mmthick Pvc Edge Banding Tape. Edge Band Must Be Trimmed On Edges And Corners.Seat And Back Rest Shall Be Made Of 18Mm Thickplywood Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish) Except Back Rest. Back Rest Shall Be Have Both Sidescolour Lamination. Technical Details Of Seat And Back Rest Are Mentioned Below:Seating Bench Dimensions Shall L 900 Mm X W 300 Mm. Front Side Shall Be Rounded Withpost Forming. Remaining Three Edges Shall Sealed With 2Mm Thick Pvc Edge Banding Tape.Back Rest Dimensions Shall L 900 X H 200 Mm Upper Side Shall Be Rounded With Post Forming Remaining Three Edges Shall Be Sealed With 2Mm Thickpvc Edge Banding Tape. Desk Shelve Shall Be Made Of Prime Quality 0.8Mm Thick Crca Sheet Of H150mmxd300mm And Side Stiffeners Of Mscrca Tube Size 19Mmx19mmx1mmthick. One Vertical Support (Partition) Of Square Tube Size 25Mm Square X1.2Mm Thick Must Be Provided At Centre Oftray . Upper Moedsty Made Of Prime Quality 0.8Mm Thick Crca Sheet Powder Coated Should Be Embossed With Dimples In Round Shape, Heightwill Be 150Mm, There Should Be Perforated Lower Modesty Made Of Prime Quality 0.8 Mm Thick Crca Sheet Of Size H150mmxd21mm Withsquare Perforation, Crcat Ube Of Size 19X19x1mm Thick To Be Inserted For Full Length At Bottom Of Jali . Thick Welded To 25Mmx50mmx1.2Mm Thick Crca Tube , Seat And Back Side Frame Structure Made Of Prime Quality Crca Pressed Form Section165mmx25mmx1mm Thick Welded To 25.4Mm Diameter X 1.6Mm Thick Erw-1Pipe , There Will Be 8No. Horizontal Supports Are 25Mmx25mmx1.2Mmthick Crca Pipes.Bottom Rectangular Tube 50X25x 1.2Mm Thick Should Be Closed With Ppcp Cap Bothside Sand Pipe Dia. 25.4X1.6Mm Thick Should Be Closed With Metal(Backside) And Other Side (Undertheseat) Ppcp Cap, Complete As Per Engineer Incharge Desk Should Be In Semi Knock Down Form With The Help16 Connecting Pipes ; 8 Pipes On Each Side : Connecting Pipe Size Will Be 20X20x1.2Mm .All Metal Pieces Shall Be Welded Properly Strongly Andconformity With Regulations With Co2 Welding Shall Be Used , Crca Metal Shall Be Coated After Being Treated With At Least Three Stages Andcleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form A Layer Of Base Coating Of(Iron Phosphating) (0.4 – 0.8) Gm/M² , Automatic Spray Coating Shall Be Applied To Be Followed By A Drying Process In A Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 Tank Treatment With Minimum 45-50 Micron Powder Coating . , Supply & Installation Medium Desk (For Two Persons)-The Overall Dimensions Of Desk Will Be 900Mm W± 5 X 890Mm D± 5 X 688/420Mm H± 5 , Complete As Per Specifications Enclosed And Direction Of Engineer-In- Charge Having The Table Top Shall Be Made Up Of 18.0 Mm Thick Plywood Is 303 Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish). Table Top Dimensions Shall Be W 850 Mm X D 380 Mm. Edge Towards Bench Shall Be Post Formed With Round Edge. The Remaining Three Edges Must Be Sealed With 2Mmthick Pvc Edge Banding Tape. Edge Band Must Be Trimmed On Edges And Corners.Seat And Back Rest Shall Be Made Of 18Mm Thick Plywood Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish) Except Back Rest. Back Rest Shall Be Have Both Sides Colour Lamination.Technical Details Of Seat And Back Rest Are Mentioned Below:Seating Bench Dimensions Shall L 900 Mm X W 300 Mm. Front Side Shall Be Rounded With Post Forming. Remaining Three Edges Shall Sealed With 2Mm Thick Pvc Edge Banding Tape. Back Rest Dimensions Shall L 900 X H 200 Mm Upper Side Shall Be Rounded With Post Forming Remaining Three Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding Tape. Desk Shelve Shall Be Made Of Prime Quality 0.8Mm Thick Crca Sheet Of H150mmxd300mm And Side Stiffeners Of Ms Crca Tube Size 19Mmx19mmx1mmthick. One Vertical Support (Partition) Of Square Tube Size 25Mm Square X1.2Mm Thick Must Be Provided At Centre Of Tray . Upper Moedsty Made Of Prime Quality 0.8Mm Thick Crca Sheet Powder Coated Should Be Embossed With Dimples In Round Shape, Height Will Be 150Mm, There Should Be Perforated Lower Modesty Made Of Prime Quality 0.8 Mm Thick Crca Sheet Of Size H150mmxd21mm With Square Perforation, Crcat Ube Of Size 19X19x1mm Thick To Be Inserted For Full Length At Bottom Of Jali . , Supplying And Installation Of Site Knock Down Type Office Table As Per Approved Design And Directrion Of Engineer-In-Charge.Work Top - Work Top Shall Be Made 25Mm Thick Pre-Laminated Mdf Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Confirming To Is 12406:2003 With Post Forming On Front, Back And Machine Pressed Pvc Egde Banding 2Mm Thick Glued With Industrial Adhesive And Diffused With Board Monolithically On Other Two Sides. Table Top Shall Have 75Mm Overhung On Front And 25Mm Overhung On Sides. Understructure- C-Type Leg Shall Be Made Of Tubular Section Of 50Mm X 50Mm X 1.6Mm (Wall Thickness) Thick Vertical Member And40mm X40mm X1.6Mm (Wall Thickness) Horizontal M.S. Pipe Confirming Is-Grade 4932 Shall Be Finished With Epoxy Polyster Powder Coated Dft 50-60 Micron. The Legs Shall Be Fitted To The Ground With M8 Screw Leveler With The Height Adjustment Up To 15Mm. The Cross Members Shall Be Mounted By End Brackets Made Of 3Mm Thick Crca Steel Sheet Confirming Is 513: 2008And Finished With Epoxy Polyster Powder Coated Dft 50-60 Micron Confirming Is 13871:1993.Wire Management - Electrical Wires Shall Be Carried From Horizintal/ Vertical Duct Made Of 0.7Mm Crca Steel Sheet Confirming To Is 513:2008. The Switch Plate Or Grommet Depending Upon Requirement Shall Also Be Provided For Electrical/Lan Connection On Table Top.Modesty Panel -Modesty Panel Of Height 450Mm Shall Be Made Of 1.5Mm Thick Crca Sheet Sheet Confirming To Is 513: 2008And Shall Be Finised With Epoxy Polyster Powder Coated Dft 50-60Micron. Storage Body- Storage Top Shall Also Be Made Of 25Mm Thick Pre-Lam Mdf Board Confirming To Is 12406:2003 With Post Forming On Two Sides And Machine Pressed Pvc Egde Banding 2 Mm Thick Glued With Industrial Adhesive And Diffused With Board Monolithically On Other Two Sides. The Body Of Storage Unitsshall Be Made Of 0.8Mm Thick Crca Steel Sheet And Skirting Shall Be Of 1.2Mm Thick Crca Steel Sheet Confirming To Is 513: 2008 Finished With Epoxy Powder Coated Of Dft 50-60 Micron Confirming Is 13871:1993. Internal Shelves Shall Be Also Made Up Of 0.8Mm Crca Steel Sheet Confirming To Is 513: 2008 And Shall Be Mounted With The Metal Shelf Support Pin Made Of 2Mm Thick Crca Steel Sheet With Nickel Or Chrome Plating.M10 Screw Leveler Is Given With Height Adjustment Up To 12Mm To 15Mm. , Table Of Size 1800Mm (W) X 750Mm (D) X 750Mm (H) With Side Storage Of Size 900Mm (W) X 450Mm (W) X 750Mm (H) And Back Storage 1800Mm (W) X 450Mm (D) X 750Mm (H) , Table Of Size 1650Mm (W) X 750Mm (D) X 750Mm (H) With Side Storage Of Size 900Mm (W) X 450Mm (W) X 750Mm (H) And Back Storage1650 Mm (W) X 450Mm (D) X 750Mm (H) , Office Table With Overall Size Of Desk 1350Mm (L) X 750Mm (W) X 750Mm (H)& Side Storage Unit Of Size 900Mm (L) X 450Mm (W) X 750Mm (H) , Supplying And Installation Of Knock Down Type Office Table Made Of Pre-Laminated Mdf Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Top Of Size 1199 X 590 X 735 Mm. Worktop Shall Be Rounded In All Four Corners And Should Have An Overhung Of 50Mm Alongwith One Drawer Unit Made Of 0.5Mm Thick Crca Steel Sheet. The Table Top Shall Be Supported Over Legs Consists Of Ms Erw Round Tube Of 25Mm Dia X 1.2Mm (Wall Thickness) And Cross Horizontal Members Including Leg Rest Of 25Mm Dia X 1.2Mm (Wall Thickness) M.S. Erw Tube. All Steel Components Be Shall Be Finised With Epoxy Polyster Powder Coated Dft 50-60Micron. , Supplying And Installation Of Knock Down Type 12 Seater Meeting Table Of Of Overall Size 3600 X 1350 (Maximum) X 750 Mm (Knock Down Type). Table Top Shall Be Made Of 25Mm Thick Pre-Laminated Partical Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Whereas The Gable Ends Shall Be Of 25Mm Thick Pre-Laminated Partical Board With Decorative Lamination On Bothside Alongwith 2Mm Thick Machine Pressed Pvc Edge Banding Glued With Industrial Adhesive And Monolithically Diffused. Supporting Understructure Consists Of2 Metal C Legs On Either Ends Of Table Support Frame Made Of 50Mm X 50Mm X 1.6 Mm (Wall Thickness) Ms Erw Tube And One Number Wire Carrier Leg At Middle Of 50Mm X 50Mm X1.6Mm (Wall Thickness), 4 Numbers Horizontal Connector Of 40Mm X 40Mm X 1.6Mm Thick Ms Pipe Between Supportingvertical Legs.All The Ms Pipes And Sheetshall Be Finished With Epoxy Powdercoated Of Dft 50-60Micron. The C Typed Metal Legs Shall Be Kept 150Mm Inside From Outer Edge Of Table Top. Agement -The Vertical (Stake) & Horizontal (Cable Tray) Wire Carriers Are Placed Below Worktop, Made Up Of Crca Steel Sheet With Epoxy Powder Coating & Fixed To The Understructure With Specially Designedbrackets, Includingprovision Of Placing Switch Plates/Grommet In The Cable Tray . , Supplyand Installation Of Library Table In Sizes Of 2400Mm (L)X 900Mm (W) X 750Mm (H) Consisting Of Follwing Specification:- Work Top - Work Top Shall Be Made Of 25Mm Thick Pre-Laminated Partical Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Confirming To Is 12823: 1990, Alongwith 2 Mm Thick Machine Pressed Pvc Edge Banding Glued With Industrial Adhesive And Monolithically Diffused With Board On Exposed Edges.Understructure Supporting Frame Shall Consists Ofthree Metal C-Legs (Two At Either Ends And One In Middle Of Table) And Joined By Two Numbers Horizontal Connector Made Of Tubular Section 40Mm X 40Mm X 1.6Mm (Wall Thickness) Confirming To Is 4923:1997.The Entire Metalframe Shall Be Finised With Epoxy Polyster Powder Coated Dft 50-60 Micron. C-Typed Metal Legs Shall Be Kept 150 Mm Inside From From End Of Table. Legs Shall Be Fitted To The Ground With M8 Screw Leveler With The Height Adjustment Up To 12Mm To 15Mm. , Supplying And Installation Of Knock Down Type Dual Computer Work Station Of Unit Size 1500Mm (L) X 600M (W) X 750Mm (H) For Two Students Work Top- Work Top Shall Be Made 25Mm Thick Prelam Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Confirming To Is 12823: 1990 With 2Mm Thick Machine Pressed Pvc Edge Banding Glued With Industrial Adhesive And Monolithically Diffused With Board On All Sides. Understructure Supporting Frame Consist Of 2 Metal C Legs On Either Ends Of Table Support Frame Made Of 50Mm X 50Mm X 1.6 Mm (Wall Thickness) Ms Erw Tube And One Number Wire Carrier Leg At Middle Of 50Mm X 50Mm X1.6Mm (Wall Thickness), 4 Numbers Horizontal Connector Of 40Mm X 40Mm X 1.6Mm Thick Ms Pipe Between Supportingvertical Legs. The Ms Pipes Shall Be Finished With Epoxy Powdercoated With Dft Of 50-60 Micron Confirming To Is 13871:1993. The Legs Shall Be Fitted To The Ground With M8 Screw Leveler With The Height Adjustment Up To 15Mm. Wire Management-The Vertical /Electrical Duct & Horizontal Cabletray ( Wire Carriers) Aremadeof Crca Steel Sheet & Fixed To The Understructure Below Worktop With Specially Designedbrackets. Provision For Fixing Switch Platesare Prividedin The Cable Tray For Easy Access Through Wire Mangaer Or Pvc Grommet. Screens / Privacy Panel: - Screen Height Will Be 300Mm Above Work-Top Made Of Prelam Particle Board/White Board Alternatively As Approved By Engineer-In-Charge. In Addition Privacy Panel Of 300 Mm Height, On Work Top, Shall Be Provided Between Two Workstation. , Supply And Installation Of Glass-Door Storage Of Size 916 Mm (W) X 486Mm (D) X 1980Mm (H). It Should Have Shelf Thickness Of 0.7Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) With Clear Glass Of 3.0Mm Thick And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca Steel Sheet ‘D’ Grade High Yield Strength As Per Is 513:2008 The Glass Door Storwel Shall Have A Ss Handle And A Two-Way Locking Mechanism With Shooting Bolt. It Should Have A Height-Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base.All Metal Components Would Be Epoxy Polyster Powder Coated Dft 50-60 Micron Confirimg To Is 13871:1993 , Overall Size 900Wx300dx2100hmm,Top Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Banding ,Side Panel Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending , Skirting Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending ,Back Panel Made Up Of 18Mm Thick Postlam Plywood , One Number Of Drawer As Per Ref.Image ,Shelf Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending, All Wooden Panels Fix Joints With Minifix Dowels & Other Fitting Equipment , All Wooden Panels Prime Quality Board With Isi Marked. Complete Structure Design Should Be As Per Reference Image Only. , Supply Adn Installation Of Lab Stool Seat Revolving Stool With Backrest Overall Dimension: 410W ±10 X 410D ±10 X 820H ±10 Mm,Seat Of Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With High Densitypu Foam & Leatherette Upholstery, Back Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Foam D -40 Kg/M3 , H-20 Seat And Back Fixed Through Metal Powder Coated Spine Covered With Plastic Cover, Seat Size: 400W ±10X 400D ±10 X 75Thick. ±5 Mm, Back Size: 450W ±10 X 240H ±10 X 50Thick. ±5Mm ,Ground To Seat Height-440-560Mm,Mechanism:- Machanism Design With Features Of Revolving At 360 Degree .Machanism Provided Upright Position Locking,Seating Height Can Be Adjusted With A Pneumatic Gas Lift,Gaslift: Lift -Used Gaslift Of 90 Mm Size Of Class-Iv Grade With Plastic Bellow Cover,Chair Base & Wheels: Metal Chrome Plated Chair Basemade Of 2.5Mm Thick Metal Chrome Plated Steel Frame, Base Consists Of 5 Prongs With 560±5 Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , High Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1210H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat,Used Pu Moulded Foam On Seat Of D-45 Kg/M3 , Back Ofchair Is Made Of Injection Moulded Pp Material Structure Upholstered With Mesh Fabric , Adjustable Lumber Support Upholstered With Fabric , Adjustable Headrest On Back Upholstered With Mesh Fabric ,Seat Size:- 470W ±10 X 460D ±10 X 70Thick. ±5 Mm , Back Size: 500W ±10 X 780H ±10,Mechanism:- The Synchro Tilt Mechanism ,Used Gaslift Of 90 Mm Size Of Class-Iv Grade,Armrest:- Pu Padded Adjustable Armrestfixed With Seat ,Chair Base & Wheels: Ms Chrome Plated Base Consists Of 5 Prongs With 640±5 Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , Medium Back Revolving Chair, Overall Dimension:- 720W ±10 X 720D ±10 X 1070H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat , Used Pu Moulded Foam On Seat Ofd-45 Kg/M3 , Back Of High Back Chair Is Made Of Injection Moulded Pp Material Structure ,Combination Of Upholstered With Mesh Fabric , Seat And Back Connected Through Metal Powder Coated Plate, Adjustable Lumber Support Upholstered With Fabric , Seat Size:- 470W ±10 X 470D ±10 X 70Thick. ±5 Mm , Back Size: 525W ±10 X605h ±10,Mechanism:- The Synchro Tilt Mechanism ,Used Gaslift Of 90 Mm Size Of Class-Iv Grade,Armrest: Pu Padded Adjustable Armrest Fixed On Frame,Chair Base & Wheels: Metal Chrome Plated Chair Base Consists Of 5 Prongs With 650±5 Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor. , Fixed Visitor Chair, Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat , Used Pu Moulded Foam On Seat Of D-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Made Powder Coating Ofround Pipe 14 Gauge Thickneess With Plastic Bushes . , Medium Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1010H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat ,Used Pu Moulded Foam On Seat Ofd-45 Kg/M3 , Back Of Chair Is Made Of Injection Moulded Pp Material Structure Combination Of Upholstered With Mesh Fabric , Seat And Back Connected Through Metal Powder Coated Plate Having Adjustable Lumber Support Upholstered With Fabric , Seat Size:- 490W ±10 X 450D ±10 X 70Thick. ±5 Mm , Back Size: 525W ±10 X640h ±10,Mechanism:- The Synchro Tilt Mechanism ,Used Gaslift Of 90 Mm Size Of Class-3 Grade,Armrest: Pu Padded Adjustable Armrest,Chair Base & Wheels: Revolving Pedestal Nylon Base Consists Of 5 Prongs With 640±5 Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , Supplying And Installation Of Metal Lockers With Cam Lock One Unit Consiting Of 381Mm (W) X 381Mm (D) X 1831Mm (H) With 4 Lockers. Body-Lh And Rh Side And Back Panel Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008 Which Is Having Standard Dimension 1831 X380mm. Shelf Hanging Bracket Is Welded On Both The Side Panel By Spot Welding. Shelf Hanging Bracket Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008. Front Frame, Top And Bottom Part Made Up 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008 And Horizontal Part Is Made Up 1Mm Thick Crca Steel Sheet Confirming To Is 513:2008. On A Front Frame Horizontally Provision Is Given At A Common Distance To Hold Shutter Bracket. Locker’S Top Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming Is 513:2008 Which Is Having Standard Dimension 375 X378mm. Shelf Is Also Made Up Of 0.8 Mm Crca Steel Sheet Confirming To Is 513:2008.Shutter- Is Made Up On 0.7Mm Thick Crca Steel Sheet Confirming To Is 513:2008. All The Shutter Are Hung On Shutter Pin And Shutter Bracket, Louvers Are Given In Shutter For Air Flow. Pvc Flush Handle And Name Plate Is Used For Handling And For Name Plate Tagging. Standard Locking Arrangment Is Used For Locking Each Shutter.The Bodies Including Shelves Are Given Anti-Rust Surface Treatment & Are Powder Coated With Epoxy Polyester Powder Coating Of Dft 50-60 Micron Confirimg To Is 13871:1993. , 1.Dimensions And Configuration Total Width Of The Setup: Minimum 12 Feet. Height: Approximately 4 To 4.5 Feet From The Board Surface. 2.Sliding Boards: Quantity: 2 (Left And Right). Size (Each Board): 6 Feet (W) × 4 Feet (H) 3.Material: Left: Green Chalkboard (Matte Surface, Suitable For Chalk) Right: Whiteboard (Glossy Surface, Suitable For Dry-Erase Markers) 4.Function: Boards Shall Slide Horizontally On A Top And Bottom Aluminum/Steel Channel Track To Fully Cover Or Reveal The Ifp As Needed. 5. Interactive Flat Panel (Ifp) Position: Centered Within The Frame And Between The Two Sliding Boards. Mounting: Wall-Mounted Securely Inside The Board Structure, With Space Allowance For Ventilation And Service Access. Ifp Opening Size: Sized Appropriately To The Ifp Being Installed (Contractor To Confirm Model And Dimensions). 6.Frame Material: Laminated Plywood Or Mdf With A Natural Wood Finish Or Laminated Color Finish (As Per Architect/Owner Approval). 7. Frame And Track System Material: Aluminum Or Powder-Coated Steel Tracks With Smooth Sliding Mechanism. Top & Bottom Rails: Tracks Shall Be Aligned And Reinforced To Ensure Boards Move Easily And Without Wobble. Finish: Durable, Corrosion-Resistant Coating Suitable For Indoor Use. 8.. Additional Requirements All Boards And The Structure Must Be Securely Fixed To The Wall With Appropriate Fasteners. Provision For Cable Management Must Be Included For The Ifp (I.E., Concealed Conduit/Path For Power And Data Cables). The Unit Must Be Free From Sharp Edges, Splinters, Or Any Protruding Parts That Could Cause Injury. Installation Height Should Ensure Comfortable Writing Access For Average Adult And Student Height (Typically Bottom Edge ~2.5 To 3 Feet From The Floor). , Supply And Installation Of Physics Along The Wall Lab Table Of Size1800(L) X 750(W) X 860(H)(9 No)With Specification As Under: Overall Size 1800W X 750D X 850H.Storage Box Size 1800W X 750D X 850 . Physics Island Lab Table Of Size1800(L) X 1500(W) X 860(H)(2 No)With Specification As Under:Overall Size 1800W X 1500D X 850H.Storage Box Size 1800W X 1500D X 850.Box Of Storage( 1D + 2S ).Storage Per Box Size Without Granite600w X 570D X 713H Using 100Mm Pvc Leg Supported .Storage Upper Top 19Mm Thick Granite Top All Joints Will Be Filled With Silicon Sealent. The Material Must Be 18 Mm Plywood With Mica At All Sides. , Supply And Installation Of Chemistry Along The Wall Lab Table Of Size1800(L) X 750(W) X 860(H)(9 No)With Specification As Under: Overall Size 1800W X 750D X 850H.Storage Box Size 1800W X 750D X 850H1 X 1550H2 . 1 Nos. Reagent Racksize 1300W X 300D X 700H. Chemistry Island Lab Table Of Size1800(L) X 1500(W) X 860(H)(2 No)With Specification As Under:Overall Size 1800W X 1500D X 850H.Storage Box Size 1800W X 1500D X 850H1 X 1550H2 . 1 Nos. Reagent Racksize 1300W X 300D X 700H. Box Of Storage( 1D + 2S ) 0.8Mm Ms Sheet Powder Coated.Storage Per Box Size Without Granite600w X 570D X 713H Using 100Mm Pvc Leg Supported .Storage Upper Top 19Mm Thick Granite Top All Joints Will Be Filled With Silicon Sealent.The Material Used Must Be 18 Mm Plywood With Mica At All Sides , Supply And Installation Of Biology Along The Wall Lab Table Of Size1800(L) X 750(W) X 860(H)(9 No)With Specification As Under: Overall Size 1800W X 750D X 850H.Storage Box Size 1800W X 750D X 850H1 X 1550H2 . 1 Nos. Reagent Racksize 1300W X 300D X 700H. Biology Island Lab Table Of Size1800(L) X 1500(W) X 860(H)(2 No)With Specification As Under:Overall Size 1800W X 1500D X 850H.Storage Box Size 1800W X 1500D X 850H1 X 1550H2 . 1 Nos. Reagent Racksize 1300W X 300D X 700H. Box Of Storage( 1D + 2S ) 0.8Mm Ms Sheet Powder Coated.Storage Per Box Size Without Granite600w X 570D X 713H Using 100Mm Pvc Leg Supported .Storage Upper Top 19Mm Thick Granite Top All Joints Will Be Filled With Silicon Sealent. The Material Used Must Be 18 Mm Plywood With Mica At All Sides. , Kitchen & Dining , Dining Table: Ss Dinning Table Consists Of Dinning Top Is Made Up Of 1 Mm Thickness Stainless Steel Sheet Of Ss 304 Grade With Overall Dimension Of 1800(L) X 700(D) X 750(H). The Table Top Is Reinforced With A 18 Mm Ply Board On Stainless Steel Frame Of Square Section 40Mmx40mmx1.6Mm. Dinning Top Of Stainless Steel Sheet Shall Be Extended To The Sides And A Depth Upto 40 Mm Under The Table Top In All Directions Includingedge Rounding, Grinding And Finishing Etc. All Complete. The Table Top Shall Finish In Such A Manner To Avoid Any Sharp Edges. The Table Will Be Supported By Four Hollow Legs Made From Ss 304 Grade Stainless Steel. The Hollow Legs Shall Be Of Square Type Of Size 50Mmx50mmx1.6Mm. These Legs Shall Be Securely Welded Or Mechanically Fastened To The Underside Of The Tabletop Frame. For Additional Structural Stability, Stainless Steel Cross Supports Shall Be Provided Between The Legs As Shown In Figure With 40Mmx40mmx1.6Mmss Square Section. The Table Shall Include Rubber Shoes At The Bottom Of Each Leg To Prevent Floor Damage And Ensure Stability. The Design Shall Prioritize User Safety With No Sharp Corners Or Edges. The Table Must Be Structurally Sound And Capable Of Supporting A Uniformly Distributed Load Of At Least 250 Kg. All Materials Used Must Conform To Relevant Is Standards, And The Finished Product Should Be Free From Burrs, Dents, Or Deformities , Dining Bench: The Bench Shall Be Of Size 1800 Mm In Length, 300 Mm In Depth, And 450 Mm In Height, Suitable For Use In Residential Schools. The Bench Top Shall Be Made Of 18 Mm Thick Plywood + Laminated , Finished With A 0.8 Mm Thick Decorative Laminate On The Top Surface, And A Balancing Laminatebacking On The Underside To Ensure Dimensional Stability. All Exposed Edges Shall Be Sealed With Pvc Edge Banding Or Machine-Finished To Prevent Splinters And Enhance Durability. The Plywood Shall Be Scratch-Resistant, Water-Resistant, And Easy To Clean, With A Light Woodgrain Or Equivalent Finish As Approved. The Supporting Frame Shall Be Fabricated Frame Of Square Section 40Mmx40mmx1.6Mm Ms Pipe In Powder Coated. These Legs Shall Be Securely Welded Or Mechanically Fastened To The Underside Of The Benchtop Frame. The Bench Shall Include Rubber Shoes At The Bottom Of Each Leg To Prevent Floor Damage And Ensure Stability. The Design Shall Prioritize User Safety With No Sharp Corners Or Edges. The Bench Must Be Structurally Sound And Capable Of Supporting A Uniformly Distributed Load Of At Least 250 Kg. All Materials Used Must Conform To Relevant Is Standards, And The Finished Product Should Be Free From Burrs, Dents, Or Deformities , Boys & Girls Dormitories , Providing And Installing 18 Mm Hdhmr Boards On Existing Rcc And Cement Plasterbrick Walls With The Help Of Counter Sink Fasteners In Plump And Level. All Edges To Be Rounded. 1Mm Laminated Should Be Pasted On All Visible Areas And Edges Polished To Match The Laminate Shade.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
West Bengal View Result →
32.
Housing Urban and Rular Development #9485191 Technical Bid
Supply And Fixing (Installation) Of Furniture At Jnv Left Over Work Phase-Aand B, Sheohar (Bihar) , School Building , Supply & Installation Big Desk (For Two Persons)-The Overall Dimensions Of Desk Will Be 1066Mm * 930Mm * Height 760Mm, Complete As Perspecifications Enclosed And Direction Of Engineer-In- Charge Having The Table Top Shall Be Made Up Of 18.0 Mm Thick Plywood Is 303 Of Mr Gradeosl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish). Table Top Dimensions Shall Be W 850 Mm X D 380 Mm. Edge Towards Benchshall Be Post Formed With Round Edge. The Remaining Three Edges Must Be Sealed With 2Mmthick Pvc Edge Banding Tape. Edge Band Must Be Trimmed On Edges And Corners.Seat And Back Rest Shall Be Made Of 18Mm Thickplywood Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish) Except Back Rest. Back Rest Shall Be Have Both Sidescolour Lamination. Technical Details Of Seat And Back Rest Are Mentioned Below:Seating Bench Dimensions Shall L 900 Mm X W 300 Mm. Front Side Shall Be Rounded Withpost Forming. Remaining Three Edges Shall Sealed With 2Mm Thick Pvc Edge Banding Tape.Back Rest Dimensions Shall L 900 X H 200 Mm Upper Side Shall Be Rounded With Post Forming Remaining Three Edges Shall Be Sealed With 2Mm Thickpvc Edge Banding Tape. Desk Shelve Shall Be Made Of Prime Quality 0.8Mm Thick Crca Sheet Of H150mmxd300mm And Side Stiffeners Of Mscrca Tube Size 19Mmx19mmx1mmthick. One Vertical Support (Partition) Of Square Tube Size 25Mm Square X1.2Mm Thick Must Be Provided At Centre Oftray . Upper Moedsty Made Of Prime Quality 0.8Mm Thick Crca Sheet Powder Coated Should Be Embossed With Dimples In Round Shape, Heightwill Be 150Mm, There Should Be Perforated Lower Modesty Made Of Prime Quality 0.8 Mm Thick Crca Sheet Of Size H150mmxd21mm Withsquare Perforation, Crcat Ube Of Size 19X19x1mm Thick To Be Inserted For Full Length At Bottom Of Jali . Thick Welded To 25Mmx50mmx1.2Mm Thick Crca Tube , Seat And Back Side Frame Structure Made Of Prime Quality Crca Pressed Form Section165mmx25mmx1mm Thick Welded To 25.4Mm Diameter X 1.6Mm Thick Erw-1Pipe , There Will Be 8No. Horizontal Supports Are 25Mmx25mmx1.2Mmthick Crca Pipes.Bottom Rectangular Tube 50X25x 1.2Mm Thick Should Be Closed With Ppcp Cap Bothside Sand Pipe Dia. 25.4X1.6Mm Thick Should Be Closed With Metal(Backside) And Other Side (Undertheseat) Ppcp Cap, Complete As Per Engineer Incharge Desk Should Be In Semi Knock Down Form With The Help16 Connecting Pipes ; 8 Pipes On Each Side : Connecting Pipe Size Will Be 20X20x1.2Mm .All Metal Pieces Shall Be Welded Properly Strongly Andconformity With Regulations With Co2 Welding Shall Be Used , Crca Metal Shall Be Coated After Being Treated With At Least Three Stages Andcleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form A Layer Of Base Coating Of(Iron Phosphating) (0.4 – 0.8) Gm/M² , Automatic Spray Coating Shall Be Applied To Be Followed By A Drying Process In A Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 Tank Treatment With Minimum 45-50 Micron Powder Coating . , Supply & Installation Medium Desk (For Two Persons)-The Overall Dimensions Of Desk Will Be 900Mm W± 5 X 890Mm D± 5 X 688/420Mm H± 5 , Complete As Per Specifications Enclosed And Direction Of Engineer-In- Charge Having The Table Top Shall Be Made Up Of 18.0 Mm Thick Plywood Is 303 Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish). Table Top Dimensions Shall Be W 850 Mm X D 380 Mm. Edge Towards Bench Shall Be Post Formed With Round Edge. The Remaining Three Edges Must Be Sealed With 2Mmthick Pvc Edge Banding Tape. Edge Band Must Be Trimmed On Edges And Corners.Seat And Back Rest Shall Be Made Of 18Mm Thick Plywood Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish) Except Back Rest. Back Rest Shall Be Have Both Sides Colour Lamination.Technical Details Of Seat And Back Rest Are Mentioned Below:Seating Bench Dimensions Shall L 900 Mm X W 300 Mm. Front Side Shall Be Rounded With Post Forming. Remaining Three Edges Shall Sealed With 2Mm Thick Pvc Edge Banding Tape. Back Rest Dimensions Shall L 900 X H 200 Mm Upper Side Shall Be Rounded With Post Forming Remaining Three Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding Tape. Desk Shelve Shall Be Made Of Prime Quality 0.8Mm Thick Crca Sheet Of H150mmxd300mm And Side Stiffeners Of Ms Crca Tube Size 19Mmx19mmx1mmthick. One Vertical Support (Partition) Of Square Tube Size 25Mm Square X1.2Mm Thick Must Be Provided At Centre Of Tray . Upper Moedsty Made Of Prime Quality 0.8Mm Thick Crca Sheet Powder Coated Should Be Embossed With Dimples In Round Shape, Height Will Be 150Mm, There Should Be Perforated Lower Modesty Made Of Prime Quality 0.8 Mm Thick Crca Sheet Of Size H150mmxd21mm With Square Perforation, Crcat Ube Of Size 19X19x1mm Thick To Be Inserted For Full Length At Bottom Of Jali . , Supplying And Installation Of Site Knock Down Type Office Table As Per Approved Design And Directrion Of Engineer-In-Charge.Work Top - Work Top Shall Be Made 25Mm Thick Pre-Laminated Mdf Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Confirming To Is 12406:2003 With Post Forming On Front, Back And Machine Pressed Pvc Egde Banding 2Mm Thick Glued With Industrial Adhesive And Diffused With Board Monolithically On Other Two Sides. Table Top Shall Have 75Mm Overhung On Front And 25Mm Overhung On Sides. Understructure- C-Type Leg Shall Be Made Of Tubular Section Of 50Mm X 50Mm X 1.6Mm (Wall Thickness) Thick Vertical Member And40mm X40mm X1.6Mm (Wall Thickness) Horizontal M.S. Pipe Confirming Is-Grade 4932 Shall Be Finished With Epoxy Polyster Powder Coated Dft 50-60 Micron. The Legs Shall Be Fitted To The Ground With M8 Screw Leveler With The Height Adjustment Up To 15Mm. The Cross Members Shall Be Mounted By End Brackets Made Of 3Mm Thick Crca Steel Sheet Confirming Is 513: 2008And Finished With Epoxy Polyster Powder Coated Dft 50-60 Micron Confirming Is 13871:1993.Wire Management - Electrical Wires Shall Be Carried From Horizintal/ Vertical Duct Made Of 0.7Mm Crca Steel Sheet Confirming To Is 513:2008. The Switch Plate Or Grommet Depending Upon Requirement Shall Also Be Provided For Electrical/Lan Connection On Table Top.Modesty Panel -Modesty Panel Of Height 450Mm Shall Be Made Of 1.5Mm Thick Crca Sheet Sheet Confirming To Is 513: 2008And Shall Be Finised With Epoxy Polyster Powder Coated Dft 50-60Micron. Storage Body- Storage Top Shall Also Be Made Of 25Mm Thick Pre-Lam Mdf Board Confirming To Is 12406:2003 With Post Forming On Two Sides And Machine Pressed Pvc Egde Banding 2 Mm Thick Glued With Industrial Adhesive And Diffused With Board Monolithically On Other Two Sides. The Body Of Storage Unitsshall Be Made Of 0.8Mm Thick Crca Steel Sheet And Skirting Shall Be Of 1.2Mm Thick Crca Steel Sheet Confirming To Is 513: 2008 Finished With Epoxy Powder Coated Of Dft 50-60 Micron Confirming Is 13871:1993. Internal Shelves Shall Be Also Made Up Of 0.8Mm Crca Steel Sheet Confirming To Is 513: 2008 And Shall Be Mounted With The Metal Shelf Support Pin Made Of 2Mm Thick Crca Steel Sheet With Nickel Or Chrome Plating.M10 Screw Leveler Is Given With Height Adjustment Up To 12Mm To 15Mm. , Table Of Size 1800Mm (W) X 750Mm (D) X 750Mm (H) With Side Storage Of Size 900Mm (W) X 450Mm (W) X 750Mm (H) And Back Storage 1800Mm (W) X 450Mm (D) X 750Mm (H) , Table Of Size 1650Mm (W) X 750Mm (D) X 750Mm (H) With Side Storage Of Size 900Mm (W) X 450Mm (W) X 750Mm (H) And Back Storage1650 Mm (W) X 450Mm (D) X 750Mm (H) , Office Table With Overall Size Of Desk 1350Mm (L) X 750Mm (W) X 750Mm (H)& Side Storage Unit Of Size 900Mm (L) X 450Mm (W) X 750Mm (H) , Supplying And Installation Of Knock Down Type Office Table Made Of Pre-Laminated Mdf Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Top Of Size 1199 X 590 X 735 Mm. Worktop Shall Be Rounded In All Four Corners And Should Have An Overhung Of 50Mm Alongwith One Drawer Unit Made Of 0.5Mm Thick Crca Steel Sheet. The Table Top Shall Be Supported Over Legs Consists Of Ms Erw Round Tube Of 25Mm Dia X 1.2Mm (Wall Thickness) And Cross Horizontal Members Including Leg Rest Of 25Mm Dia X 1.2Mm (Wall Thickness) M.S. Erw Tube. All Steel Components Be Shall Be Finised With Epoxy Polyster Powder Coated Dft 50-60Micron. , Supplying And Installation Of Knock Down Type 12 Seater Meeting Table Of Of Overall Size 3600 X 1350 (Maximum) X 750 Mm (Knock Down Type). Table Top Shall Be Made Of 25Mm Thick Pre-Laminated Partical Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Whereas The Gable Ends Shall Be Of 25Mm Thick Pre-Laminated Partical Board With Decorative Lamination On Bothside Alongwith 2Mm Thick Machine Pressed Pvc Edge Banding Glued With Industrial Adhesive And Monolithically Diffused. Supporting Understructure Consists Of2 Metal C Legs On Either Ends Of Table Support Frame Made Of 50Mm X 50Mm X 1.6 Mm (Wall Thickness) Ms Erw Tube And One Number Wire Carrier Leg At Middle Of 50Mm X 50Mm X1.6Mm (Wall Thickness), 4 Numbers Horizontal Connector Of 40Mm X 40Mm X 1.6Mm Thick Ms Pipe Between Supportingvertical Legs.All The Ms Pipes And Sheetshall Be Finished With Epoxy Powdercoated Of Dft 50-60Micron. The C Typed Metal Legs Shall Be Kept 150Mm Inside From Outer Edge Of Table Top. Agement -The Vertical (Stake) & Horizontal (Cable Tray) Wire Carriers Are Placed Below Worktop, Made Up Of Crca Steel Sheet With Epoxy Powder Coating & Fixed To The Understructure With Specially Designedbrackets, Includingprovision Of Placing Switch Plates/Grommet In The Cable Tray . , Supplyand Installation Of Library Table In Sizes Of 2400Mm (L)X 900Mm (W) X 750Mm (H) Consisting Of Follwing Specification:- Work Top - Work Top Shall Be Made Of 25Mm Thick Pre-Laminated Partical Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Confirming To Is 12823: 1990, Alongwith 2 Mm Thick Machine Pressed Pvc Edge Banding Glued With Industrial Adhesive And Monolithically Diffused With Board On Exposed Edges.Understructure Supporting Frame Shall Consists Ofthree Metal C-Legs (Two At Either Ends And One In Middle Of Table) And Joined By Two Numbers Horizontal Connector Made Of Tubular Section 40Mm X 40Mm X 1.6Mm (Wall Thickness) Confirming To Is 4923:1997.The Entire Metalframe Shall Be Finised With Epoxy Polyster Powder Coated Dft 50-60 Micron. C-Typed Metal Legs Shall Be Kept 150 Mm Inside From From End Of Table. Legs Shall Be Fitted To The Ground With M8 Screw Leveler With The Height Adjustment Up To 12Mm To 15Mm. , Supplying And Installation Of Knock Down Type Dual Computer Work Station Of Unit Size 1500Mm (L) X 600M (W) X 750Mm (H) For Two Students Work Top- Work Top Shall Be Made 25Mm Thick Prelam Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Confirming To Is 12823: 1990 With 2Mm Thick Machine Pressed Pvc Edge Banding Glued With Industrial Adhesive And Monolithically Diffused With Board On All Sides. Understructure Supporting Frame Consist Of 2 Metal C Legs On Either Ends Of Table Support Frame Made Of 50Mm X 50Mm X 1.6 Mm (Wall Thickness) Ms Erw Tube And One Number Wire Carrier Leg At Middle Of 50Mm X 50Mm X1.6Mm (Wall Thickness), 4 Numbers Horizontal Connector Of 40Mm X 40Mm X 1.6Mm Thick Ms Pipe Between Supportingvertical Legs. The Ms Pipes Shall Be Finished With Epoxy Powdercoated With Dft Of 50-60 Micron Confirming To Is 13871:1993. The Legs Shall Be Fitted To The Ground With M8 Screw Leveler With The Height Adjustment Up To 15Mm. Wire Management-The Vertical /Electrical Duct & Horizontal Cabletray ( Wire Carriers) Aremadeof Crca Steel Sheet & Fixed To The Understructure Below Worktop With Specially Designedbrackets. Provision For Fixing Switch Platesare Prividedin The Cable Tray For Easy Access Through Wire Mangaer Or Pvc Grommet. Screens / Privacy Panel: - Screen Height Will Be 300Mm Above Work-Top Made Of Prelam Particle Board/White Board Alternatively As Approved By Engineer-In-Charge. In Addition Privacy Panel Of 300 Mm Height, On Work Top, Shall Be Provided Between Two Workstation. , Supply And Installation Of Glass-Door Storage Of Size 916 Mm (W) X 486Mm (D) X 1980Mm (H). It Should Have Shelf Thickness Of 0.7Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) With Clear Glass Of 3.0Mm Thick And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca Steel Sheet ‘D’ Grade High Yield Strength As Per Is 513:2008 The Glass Door Storwel Shall Have A Ss Handle And A Two-Way Locking Mechanism With Shooting Bolt. It Should Have A Height-Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base.All Metal Components Would Be Epoxy Polyster Powder Coated Dft 50-60 Micron Confirimg To Is 13871:1993 , Overall Size 900Wx300dx2100hmm,Top Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Banding ,Side Panel Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending , Skirting Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending ,Back Panel Made Up Of 18Mm Thick Postlam Plywood , One Number Of Drawer As Per Ref.Image ,Shelf Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending, All Wooden Panels Fix Joints With Minifix Dowels & Other Fitting Equipment , All Wooden Panels Prime Quality Board With Isi Marked. Complete Structure Design Should Be As Per Reference Image Only. , Supply Adn Installation Of Lab Stool Seat Revolving Stool With Backrest Overall Dimension: 410W ±10 X 410D ±10 X 820H ±10 Mm,Seat Of Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With High Densitypu Foam & Leatherette Upholstery, Back Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Foam D -40 Kg/M3 , H-20 Seat And Back Fixed Through Metal Powder Coated Spine Covered With Plastic Cover, Seat Size: 400W ±10X 400D ±10 X 75Thick. ±5 Mm, Back Size: 450W ±10 X 240H ±10 X 50Thick. ±5Mm ,Ground To Seat Height-440-560Mm,Mechanism:- Machanism Design With Features Of Revolving At 360 Degree .Machanism Provided Upright Position Locking,Seating Height Can Be Adjusted With A Pneumatic Gas Lift,Gaslift: Lift -Used Gaslift Of 90 Mm Size Of Class-Iv Grade With Plastic Bellow Cover,Chair Base & Wheels: Metal Chrome Plated Chair Basemade Of 2.5Mm Thick Metal Chrome Plated Steel Frame, Base Consists Of 5 Prongs With 560±5 Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , High Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1210H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat,Used Pu Moulded Foam On Seat Of D-45 Kg/M3 , Back Ofchair Is Made Of Injection Moulded Pp Material Structure Upholstered With Mesh Fabric , Adjustable Lumber Support Upholstered With Fabric , Adjustable Headrest On Back Upholstered With Mesh Fabric ,Seat Size:- 470W ±10 X 460D ±10 X 70Thick. ±5 Mm , Back Size: 500W ±10 X 780H ±10,Mechanism:- The Synchro Tilt Mechanism ,Used Gaslift Of 90 Mm Size Of Class-Iv Grade,Armrest:- Pu Padded Adjustable Armrestfixed With Seat ,Chair Base & Wheels: Ms Chrome Plated Base Consists Of 5 Prongs With 640±5 Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , Medium Back Revolving Chair, Overall Dimension:- 720W ±10 X 720D ±10 X 1070H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat , Used Pu Moulded Foam On Seat Ofd-45 Kg/M3 , Back Of High Back Chair Is Made Of Injection Moulded Pp Material Structure ,Combination Of Upholstered With Mesh Fabric , Seat And Back Connected Through Metal Powder Coated Plate, Adjustable Lumber Support Upholstered With Fabric , Seat Size:- 470W ±10 X 470D ±10 X 70Thick. ±5 Mm , Back Size: 525W ±10 X605h ±10,Mechanism:- The Synchro Tilt Mechanism ,Used Gaslift Of 90 Mm Size Of Class-Iv Grade,Armrest: Pu Padded Adjustable Armrest Fixed On Frame,Chair Base & Wheels: Metal Chrome Plated Chair Base Consists Of 5 Prongs With 650±5 Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor. , Fixed Visitor Chair, Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat , Used Pu Moulded Foam On Seat Of D-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Made Powder Coating Ofround Pipe 14 Gauge Thickneess With Plastic Bushes . , Medium Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1010H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat ,Used Pu Moulded Foam On Seat Ofd-45 Kg/M3 , Back Of Chair Is Made Of Injection Moulded Pp Material Structure Combination Of Upholstered With Mesh Fabric , Seat And Back Connected Through Metal Powder Coated Plate Having Adjustable Lumber Support Upholstered With Fabric , Seat Size:- 490W ±10 X 450D ±10 X 70Thick. ±5 Mm , Back Size: 525W ±10 X640h ±10,Mechanism:- The Synchro Tilt Mechanism ,Used Gaslift Of 90 Mm Size Of Class-3 Grade,Armrest: Pu Padded Adjustable Armrest,Chair Base & Wheels: Revolving Pedestal Nylon Base Consists Of 5 Prongs With 640±5 Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , Supplying And Installation Of Metal Lockers With Cam Lock One Unit Consiting Of 381Mm (W) X 381Mm (D) X 1831Mm (H) With 4 Lockers. Body-Lh And Rh Side And Back Panel Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008 Which Is Having Standard Dimension 1831 X380mm. Shelf Hanging Bracket Is Welded On Both The Side Panel By Spot Welding. Shelf Hanging Bracket Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008. Front Frame, Top And Bottom Part Made Up 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008 And Horizontal Part Is Made Up 1Mm Thick Crca Steel Sheet Confirming To Is 513:2008. On A Front Frame Horizontally Provision Is Given At A Common Distance To Hold Shutter Bracket. Locker’S Top Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming Is 513:2008 Which Is Having Standard Dimension 375 X378mm. Shelf Is Also Made Up Of 0.8 Mm Crca Steel Sheet Confirming To Is 513:2008.Shutter- Is Made Up On 0.7Mm Thick Crca Steel Sheet Confirming To Is 513:2008. All The Shutter Are Hung On Shutter Pin And Shutter Bracket, Louvers Are Given In Shutter For Air Flow. Pvc Flush Handle And Name Plate Is Used For Handling And For Name Plate Tagging. Standard Locking Arrangment Is Used For Locking Each Shutter.The Bodies Including Shelves Are Given Anti-Rust Surface Treatment & Are Powder Coated With Epoxy Polyester Powder Coating Of Dft 50-60 Micron Confirimg To Is 13871:1993. , 1.Dimensions And Configuration Total Width Of The Setup: Minimum 12 Feet. Height: Approximately 4 To 4.5 Feet From The Board Surface. 2.Sliding Boards: Quantity: 2 (Left And Right). Size (Each Board): 6 Feet (W) × 4 Feet (H) 3.Material: Left: Green Chalkboard (Matte Surface, Suitable For Chalk) Right: Whiteboard (Glossy Surface, Suitable For Dry-Erase Markers) 4.Function: Boards Shall Slide Horizontally On A Top And Bottom Aluminum/Steel Channel Track To Fully Cover Or Reveal The Ifp As Needed. 5. Interactive Flat Panel (Ifp) Position: Centered Within The Frame And Between The Two Sliding Boards. Mounting: Wall-Mounted Securely Inside The Board Structure, With Space Allowance For Ventilation And Service Access. Ifp Opening Size: Sized Appropriately To The Ifp Being Installed (Contractor To Confirm Model And Dimensions). 6.Frame Material: Laminated Plywood Or Mdf With A Natural Wood Finish Or Laminated Color Finish (As Per Architect/Owner Approval). 7. Frame And Track System Material: Aluminum Or Powder-Coated Steel Tracks With Smooth Sliding Mechanism. Top & Bottom Rails: Tracks Shall Be Aligned And Reinforced To Ensure Boards Move Easily And Without Wobble. Finish: Durable, Corrosion-Resistant Coating Suitable For Indoor Use. 8.. Additional Requirements All Boards And The Structure Must Be Securely Fixed To The Wall With Appropriate Fasteners. Provision For Cable Management Must Be Included For The Ifp (I.E., Concealed Conduit/Path For Power And Data Cables). The Unit Must Be Free From Sharp Edges, Splinters, Or Any Protruding Parts That Could Cause Injury. Installation Height Should Ensure Comfortable Writing Access For Average Adult And Student Height (Typically Bottom Edge ~2.5 To 3 Feet From The Floor). , Supply And Installation Of Physics Along The Wall Lab Table Of Size1800(L) X 750(W) X 860(H)(9 No)With Specification As Under: Overall Size 1800W X 750D X 850H.Storage Box Size 1800W X 750D X 850 . Physics Island Lab Table Of Size1800(L) X 1500(W) X 860(H)(2 No)With Specification As Under:Overall Size 1800W X 1500D X 850H.Storage Box Size 1800W X 1500D X 850.Box Of Storage( 1D + 2S ).Storage Per Box Size Without Granite600w X 570D X 713H Using 100Mm Pvc Leg Supported .Storage Upper Top 19Mm Thick Granite Top All Joints Will Be Filled With Silicon Sealent. The Material Must Be 18 Mm Plywood With Mica At All Sides. , Supply And Installation Of Chemistry Along The Wall Lab Table Of Size1800(L) X 750(W) X 860(H)(9 No)With Specification As Under: Overall Size 1800W X 750D X 850H.Storage Box Size 1800W X 750D X 850H1 X 1550H2 . 1 Nos. Reagent Racksize 1300W X 300D X 700H. Chemistry Island Lab Table Of Size1800(L) X 1500(W) X 860(H)(2 No)With Specification As Under:Overall Size 1800W X 1500D X 850H.Storage Box Size 1800W X 1500D X 850H1 X 1550H2 . 1 Nos. Reagent Racksize 1300W X 300D X 700H. Box Of Storage( 1D + 2S ) 0.8Mm Ms Sheet Powder Coated.Storage Per Box Size Without Granite600w X 570D X 713H Using 100Mm Pvc Leg Supported .Storage Upper Top 19Mm Thick Granite Top All Joints Will Be Filled With Silicon Sealent.The Material Used Must Be 18 Mm Plywood With Mica At All Sides , Supply And Installation Of Biology Along The Wall Lab Table Of Size1800(L) X 750(W) X 860(H)(9 No)With Specification As Under: Overall Size 1800W X 750D X 850H.Storage Box Size 1800W X 750D X 850H1 X 1550H2 . 1 Nos. Reagent Racksize 1300W X 300D X 700H. Biology Island Lab Table Of Size1800(L) X 1500(W) X 860(H)(2 No)With Specification As Under:Overall Size 1800W X 1500D X 850H.Storage Box Size 1800W X 1500D X 850H1 X 1550H2 . 1 Nos. Reagent Racksize 1300W X 300D X 700H. Box Of Storage( 1D + 2S ) 0.8Mm Ms Sheet Powder Coated.Storage Per Box Size Without Granite600w X 570D X 713H Using 100Mm Pvc Leg Supported .Storage Upper Top 19Mm Thick Granite Top All Joints Will Be Filled With Silicon Sealent. The Material Used Must Be 18 Mm Plywood With Mica At All Sides. , Kitchen & Dining , Dining Table: Ss Dinning Table Consists Of Dinning Top Is Made Up Of 1 Mm Thickness Stainless Steel Sheet Of Ss 304 Grade With Overall Dimension Of 1800(L) X 700(D) X 750(H). The Table Top Is Reinforced With A 18 Mm Ply Board On Stainless Steel Frame Of Square Section 40Mmx40mmx1.6Mm. Dinning Top Of Stainless Steel Sheet Shall Be Extended To The Sides And A Depth Upto 40 Mm Under The Table Top In All Directions Includingedge Rounding, Grinding And Finishing Etc. All Complete. The Table Top Shall Finish In Such A Manner To Avoid Any Sharp Edges. The Table Will Be Supported By Four Hollow Legs Made From Ss 304 Grade Stainless Steel. The Hollow Legs Shall Be Of Square Type Of Size 50Mmx50mmx1.6Mm. These Legs Shall Be Securely Welded Or Mechanically Fastened To The Underside Of The Tabletop Frame. For Additional Structural Stability, Stainless Steel Cross Supports Shall Be Provided Between The Legs As Shown In Figure With 40Mmx40mmx1.6Mmss Square Section. The Table Shall Include Rubber Shoes At The Bottom Of Each Leg To Prevent Floor Damage And Ensure Stability. The Design Shall Prioritize User Safety With No Sharp Corners Or Edges. The Table Must Be Structurally Sound And Capable Of Supporting A Uniformly Distributed Load Of At Least 250 Kg. All Materials Used Must Conform To Relevant Is Standards, And The Finished Product Should Be Free From Burrs, Dents, Or Deformities , Dining Bench: The Bench Shall Be Of Size 1800 Mm In Length, 300 Mm In Depth, And 450 Mm In Height, Suitable For Use In Residential Schools. The Bench Top Shall Be Made Of 18 Mm Thick Plywood + Laminated , Finished With A 0.8 Mm Thick Decorative Laminate On The Top Surface, And A Balancing Laminatebacking On The Underside To Ensure Dimensional Stability. All Exposed Edges Shall Be Sealed With Pvc Edge Banding Or Machine-Finished To Prevent Splinters And Enhance Durability. The Plywood Shall Be Scratch-Resistant, Water-Resistant, And Easy To Clean, With A Light Woodgrain Or Equivalent Finish As Approved. The Supporting Frame Shall Be Fabricated Frame Of Square Section 40Mmx40mmx1.6Mm Ms Pipe In Powder Coated. These Legs Shall Be Securely Welded Or Mechanically Fastened To The Underside Of The Benchtop Frame. The Bench Shall Include Rubber Shoes At The Bottom Of Each Leg To Prevent Floor Damage And Ensure Stability. The Design Shall Prioritize User Safety With No Sharp Corners Or Edges. The Bench Must Be Structurally Sound And Capable Of Supporting A Uniformly Distributed Load Of At Least 250 Kg. All Materials Used Must Conform To Relevant Is Standards, And The Finished Product Should Be Free From Burrs, Dents, Or Deformities , Boys & Girls Dormitories , Providing And Installing 18 Mm Hdhmr Boards On Existing Rcc And Cement Plasterbrick Walls With The Help Of Counter Sink Fasteners In Plump And Level. All Edges To Be Rounded. 1Mm Laminated Should Be Pasted On All Visible Areas And Edges Polished To Match The Laminate Shade.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Bihar View Result →
33.
Dairy #9475793 Technical Bid
Tender For Re- E-Tender Of Annual Rate Contract For Job / Work Contract Of Loading-Unloading And Other Official Works - Unloading raw material from the truck and keeping it in the godown with a minimum stack of 15 (average 100 MT and maximum 150 MT per day). Collecting scattered/loose material and filling it in sacks and keeping it with the raw material.Loading 50 and 25 kg sacks of produced animal feed from anywhere in the godown/factory onto the tank (average 80 MT and maximum 150 MT per day)Picking up raw material from any godown and dumping it in the hopper, bagging and stitching the produced animal feed (50/25 kg) Unloading the sacks of produced animal feed (50/25 kg) from slot conveyor and stacking the finished product in the godown (up to a height of 1-15) Preparing the additives used in the animal feed and delivering and dumping it in the hopper Getting the raw material and finished material weighed at a fixed interval. Bringing animal feed packing bags from any warehouse and writing batch no., date and sack number. All production and engineering related works including operation and maintenance work of plant and machinery.Sweeping empty jute sacks of raw material through machine and making bundles (25 pieces) and keeping them in any warehouse of the factory.Sweeping empty plastic sacks of raw material through machine and making bundles (50 pieces) and keeping them in any warehouse of the factory.Loading old empty jute and plastic sacks/sacks on truck from anywhere inside the warehouse factory (payment will be done by the buyer).Unloading bundles of new plastic, gunny bags from truck and keeping them in the warehouse. Shifting plastic/gunny bag bundles as per requirement.Execution of works related to administration section under job/work contract (details of work can be seen in section wise work in technical bid). The works related to Marketing section can be seen in the Job/Work Contract (Details of work as per section in Technical Bid).The works related to Purchase section can be seen in the Job/Work Contract (Details of work as per section in Technical Bid).The works of MIS section can be seen in the Job/Work Contract (Details of work as per section in Technical Bid). Supervision and Service Charges (per day for cleaning and other works in office/production) Providing/Providing Labour (Unskilled, Semi-skilled, Skilled) Slabs approved by UP Labour Department
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 1
Uttar Pradesh View Result →
34.
Housing Urban and Rular Development #9468305 Technical Bid
Tender For Rates For Material/Equipment Regarding Medical Gas Pile Line System And Modular Operation Theatre For Estimate Preparation. - Rates for Material/Equipmentregarding Medical Gas Pile Line System and Modular Operation Theatre for estimate preparation. 2 Medical Gas Pipe Line (Part-A) 3 Oxygen Manifold 4 SITC of 10 + 10 size main manifold complete with middle frame with chain for individual cylinder along with Non Return Valve for every cylinder.All header racks and cylinder tailpipes should be 230 bar rated. Cylinder header racks for oxygen service shall be provided with connections for bull nose cylinder connections. Cylinder racks shall be manufactured from powder coated steel and shall be designed to securely support cylinders of varying diameters. Tailpipes shall have gas specific connections to the manifold header with threaded connections. Manifold header racks shall incorporate hard-seat, polymer-free non-return integral with each cylinder connection point to maintain system in the event of tailpipe fracture and prevent backflow of gas into the high pressure cylinders. as per specification (Mandatory submission--> 100% technical complaince sheet should be submitted with the technical bid from original manufacturer.)Make- Altos/Aktiv or Equivalent 5 Certifications: ISO 13485:2016,ISO 9001:2015, CE 6 Fully Automatic Oxygen Gas Control System 7 SITC of Fully Automatic Oxygen Control Panel for main Oxygen Manifold having constant flow output of over 2100 LPM or more at 55 to 60 psig Pressure. A test certificate shall be provided with each system detailing the results of the factory tests ,It should have halogen polymers free. It should have Digital 3.5’ colorful display. It should have Integrated & protected test point. Central regulators panel with cylinder headers each side. It should have headers which shall be complete with gas specific cylinder tailpipes. Pre-wired for alarm connection to BMS outputs. All components degreased for oxygen use .Average gas consumption indication (for not liquefied gases). Remaining gas volume indication (for not liquefied gases). It should have general maintenance indicator. It should have Pressure transmitters monitor both banks of cylinders & as per specification. (Mandatory submission--> 100% technical complaince sheet should be submitted with the technical bid from original manufacturer.)Make- Altos/Aktiv or Equivalent 8 Oxygen Flowmeter with Humidifier 9 Essentia medical gas flowmeters are designed to measure and regulate flow.These are calibrated to specific gas & flow range. Oxygen flowmeter is intended for use with various delivery system when bubble/ micro bubble humidifier is attached downstream. These flowmeters are widely used in home care, health centers, district/ general/ regional hospitals, tertiary care, emergency vehicles etc. for administration of supplemental oxygen through nasal cannula, simple face mask,partial rebreathing mask, non re-breather mask, resuscitation mask etc. A passive process to humidify dry therapeutic gas (Category 3 Humidification) Micro Bubble Humidifier for Respiratory Therapy Patient connection port : Tapered hose barb suitable for 6 mm inner diameter plastic tubingMicro bubbles through humidifier for efficient humidificationPossible to integrate into an oxygen concentrator, sleep apnoea therapy equipmentOptimal RH achievable at various flow settingsAutoclavable at 121°C (249.8°F) for 5 minutes (Minimum 5 autoclave cycles)Over pressure safety valveNon-heated and reusableInlet connection port : DISS female adapter with chrome plated Brass nut embedded in ABS for hand-tighteningFlow : Up to 15 lpm @ 4 bar (58 psi)Construction material: Polycarbonate - shatter resistantCapacity - 240ml at max water level (Jar 450ml)Make- Altos/Aktiv or Equivalent 10 Emergency Oxygen Manifold 11 The oxygen cylinder manifold should comprise of two cylinder Banks which can accommodate 6 cylinders in each Bank (means 6+6) complete with copper tail pipes with bull nose fittings of RH External threading suitable for cylinder valves (Oxygen service) and Cylinder support system. Manifold should be suitable to withstand a pressure of 140 Kg/cm2, along with high pressure copper annealed tail pipes with Brass adapter suitable for Oxygen Cylinders and manifold. Top frame comprising of high pressure copper pipes of size 1/2I.D. x 15swg with high pressure brass fittings made of high tensile brass and connections through non- return valves. High pressure copper tail pipes, made of high pressure copper pipe of size 1/4I.D. x 15 swg.The middle and bottom frame to be provided to fit both round and flat bottom cylinders safely. The manifold should be tested (hydraulically) at 250kg / cm sq. The copper tail pipes are fitted to the individual non return valves of the cylinder manifold for easy removal of cylinders without disturbance to system operation. Make- Altos/Aktivor Equivalent 12 Fully Automatic Oxygen Gas Control System 13 SITC of Fully Automatic Oxygen Control Panel for main Oxygen Manifold having constant flow output of over 2100 LPM or more at 55 to 60 psig Pressure. A test certificate shall be provided with each system detailing the results of the factory tests ,It should have halogen polymers free. It should have Digital 3.5’ colorful display. It should have Integrated & protected test point. Central regulators panel with cylinder headers each side. It should have headers which shall be complete with gas specific cylinder tailpipes. Pre-wired for alarm connection to BMS outputs. All components degreased for oxygen use .Average gas consumption indication (for not liquefied gases). Remaining gas volume indication (for not liquefied gases). It should have general maintenance indicator. It should have Pressure transmitters monitor both banks of cylinders & as per specification. (Mandatory submission--> 100% technical complaince sheet should be submitted with the technical bid from original manufacturer.)Make-Altos/Aktiv or Equivalent 14 MEDICAL NITROUS OXIDE SYSTEM 15 Nitrous Oxide Manifold 16 SITC of 4 + 4 size main manifold complete with middle frame with chain for individual cylinder along with Non Return Valve for every cylinder.All header racks and cylinder tailpipes should be 230 bar rated. Cylinder header racks for oxygen service shall be provided with connections for bull nose cylinder connections. Cylinder racks shall be manufactured from powder coated steel and shall be designed to securely support cylinders of varying diameters. Tailpipes shall have gas specific connections to the manifold header with threaded connections. Manifold header racks shall incorporate hard-seat, polymer-free non-return integral with each cylinder connection point to maintain system in the event of tailpipe fracture and prevent backflow of gas into the high pressure cylinders.. as per specification.(Mandatory submission--> 100% technical complaince sheet should be submitted with the technical bid from original manufacturer.)Make-Altos/Aktiv or Equivalent 17 Fully Automatic Nitrous Oxide Gas Control System 18 SITC of Fully Automatic Control Panel for Nitrous Oxide having constant flow output of over 500 LPM at 4.2 Bar Pressure. Digital Fully Automatic Control Panel. It should fully complies and meets with the requirements of the NFPA-99 standards. It should be UL or ETL Listed. The manifold control panel shall consist of two bank regulators (dome bias) used to reduce the cylinder pressure to the two line regulators which in turn controls the final line pressure. The manifold has an intermediate and line relief valve that is internally connected to a common vent port, terminating into a 1/2 FNPT pipe. It should be fully automatic type and shall switch from “Bank in Use” to “Reserve Bank” without fluctuation in the final line pressure. After the switchover, the “Reserve Bank” shall then become the “Bank in Use” and the “Bank in Use” shall become the “Reserve Bank.” The control panel includes a line gauge, two bank gauges and incorporates six LED’s: two green for “Bank in Use,” two yellow for “Bank Ready” and two red for “Bank Empty” on the front of the cabinet. Input power to the manifolds is 110 to 240 VAC, 50-60 Hz& as per specification. (Mandatory submission--> 100% technical complaince sheet should be submitted with the technical bid from original manufacturer.)Make- Altos/Aktiv or Equivalent 19 Emergency N2O System 20 SITC of 2 Cylinder Emergency Nitrous Oxide manifold with All header racks and cylinder tailpipes should be 230 bar rated. Cylinder header racks for oxygen service shall be provided with connections for bull nose cylinder connections. Cylinder racks shall be manufactured from powder coated steel and shall be designed to securely support cylinders of varying diameters. Tailpipes shall have gas specific connections to the manifold header with threaded connections. Manifold header racks shall incorporate hard-seat, polymer-free non-return integral with each cylinder connection point to maintain system in the event of tailpipe fracture and prevent backflow of gas into the high pressure cylinders using a high flow Preset Pressure Regulator as per specification.(Mandatory submission--> 100% technical complaince sheet should be submitted with the technical bid from original manufacturer.)Make- Altos/Aktiv or Equivalent 21 MEDICAL CARBON DIOXIDE SYSTEM 22 CARBON DIOXIDE SYSTEM 23 The CO2 cylinder manifold should comprise of two cylinder Banks which can accommodate 4 cylinders in each Bank (means 4+4) for cylinder valves conforming to IS 3234 (CO2@ service) complete with copper tail pipes with fittings. Manifold should be suitable to withstand a pressure of 140 Kg/cm2, along with high pressure copper annealed tail pipes with Brass adapter suitable for Nitrous Cylinders and manifold. Top frame comprising of high pressure copper pipes of size 1/2I.D. x 15swg with high pressure brass fittings made of high tensile brass and connections through non- return valves.High pressure copper tail pipes, made of high pressure copper pipe of size 1/4I.D. x 15 swg.The middle and bottom frame to be provided to fit both round and flat bottom cylinders safely. The manifold should be tested (hydraulically) at 250kg / cm sq. The copper tail pipes are fitted to the individual non return valves of the cylinder manifold for easy removal of cylinders without disturbance to system operation. Each manifold should be provided with one terminal header and a NPT connection for the Automatic control panel. Make- Altos/Aktiv or Equivalent 24 Certifications: ISO 13485:2016,ISO 9001:2015, CE 25 Fully Automatic Carbon DioxideGas Control System 26 SITC of Fully Automatic Control Panel for Carbon dioxide having constant flow output of over 500 LPM at 4.2 Bar Pressure. Digital Fully Automatic Control Panel.The manifold control panel shall consist of two bank regulators (dome bias) used to reduce the cylinder pressure to the two line regulators which in turn controls the final line pressure. The manifold has an intermediate and line relief valve that is internally connected to a common vent port, terminating into a 1/2 FNPT pipe. It should be fully automatic type and shall switch from “Bank in Use” to “Reserve Bank” without fluctuation in the final line pressure. After the switchover, the “Reserve Bank” shall then become the “Bank in Use” and the “Bank in Use” shall become the “Reserve Bank.” The control panel includes a line gauge, two bank gauges and incorporates six LED’s: two green for “Bank in Use,” two yellow for “Bank Ready” and two red for “Bank Empty” on the front of the cabinet. Input power to the manifolds is 110 to 240 VAC, 50-60 Hz& as per specification. (Mandatory submission--> 100% technical complaince sheet should be submitted with the technical bid from original manufacturer.)Micro processor controlled switch-over is accomplished automaticallyAutomatically resets itself for next cycle when depleted bank is replenished. No manual resetting requiredDigital pressure indication for accurate readingPressure unit options: bar, psi & kg/cm Status indicatorsPressure Stabilizer for stable discharge pressure & flowVisual & Audible signalDesigned to suit CO2 for gas specific usageOptimized residual gasMake-Altos/Aktiv or Equivalent 27 Emergency CO2 System 28 The Emergency supply manifold shouldbe connected to downstream of the manifold control panel.The assemblyshould consist of 2 (two) cylinders connection supplying a manually adjusted regulator via a common header assembly. The delivery system is isolated from the main system by an isolation valve. Pressure gauges should indicate cylinder and delivery pressure & valves conforming to ISO 13485Make- Altos/Aktiv or Equivalent 29 MEDICAL VACUUM SYSTEM 30 SITC of MEDICAL VACUUM SYSTEM AS PER SPECIFICATION 31 Vacuum Pump : The arrangement should consist of 2 nos. of oil lubricated imported rotary vane vacuum pump. Each vacuum pump should have capacity of 5000 lpm with IEC Motor rating of minimum 10 HP @ 50 Hz or above. Vacuum pumps shall comprise of air cooled, oil lubricated rotary vane vacuum pumps suitable for both continuous and frequent start / stop operation at inlet vacuum vessels between 525 mm Hg and 700 mm Hg. The ultimate vacuum of pump shall be 0.1 mbar with gas ballast valve closed. The Vacuum Pump should be air cooled and oil lubricated rotary vane vacuum pumps designed for use in the field of high quality vacuum. It should be a robust construction, reliable operation, highly resilient carbon composite fiber vanes, Gas ballast valve. The pump should be having a 4 barriers system that avoids any oil leaks by doubling the 2 lip / shaft seals. Pump vanes shall be lubricated by a fully re-circulated and filtered lubricant supply. Also Pump design should include a lubricant separation system integral to the pump exhaust box consisting of no less than four stages of internally installed lubricant and smoke eliminators through which the exhaust gas stream must pass. This system shall consist of bulk separation, lubricant mist elimination, smoke elimination, synthetic lubricant baffle, and shall be capable of removing 99.9 percent of all lubricant and smoke particles from the exhaust gas stream. The unit should have extremely low vibration as per specification.(Mandatory submission--> 100% technical complaince sheet should be submitted with the technical bid from original manufacturer.)Make- multitech/hitachi/Anistaiwata or Equivalent 32 Vacuum Tank of 5000 liters water capacity.Make- multitech/hitachi or Equivalent 33 Bacterial Filter:Vacuum Filter (Bacteria Filter) of 100 cfm to 105 cfm – 3” Filter housing with drain flask.: It fully complies and meets with requirements of UK HTM medical standards. It should have BS 3928 sodium flame test certificate based on requirements of HTM standards.The bacteria filter should be designed for critical application involving removal of dry and wet dust, particulars, oil aerosol and water droplest, high efficiency glass fiber, fieece media from suction side of vacuum pump system. It should have efficiency of at least 99.995% when tested by sodium flame test and that should be according to BS 3928:1969. The Vacuum filtration efficiency should be in excess of 99.9999% as per HTM0201 & AS 2896 standards. The high efficiency medical grade filter element should have custom engineered filter media and deep pleat element technology provides minimal pressure loss and filtration efficiencies. It should have advanced filtration technology for Low pressure loss borosilicate glass microfiber-media and open cell reticulated foam pre-filtration layer captures particulates, bacteria and liquid aerosols reducing energy consumption and overall system costs. It should have corrosion protection Internal and external electrophoretic painting followed by a tough exterior polyester powder coating.It should have easily removable sterilisable drain flask and differential pressure monitor gauge. It should have push fit element design for quick and easy maintenance with unique push fit element design. It should have element end cap color black. It should have maximum temperature 60 degree centigrade (140 degree F). It should have element of E31140MV grade. It should have pipe size connection 1” = 105scfm and 180nm3/hr FAA. It should have pressure loss clean & dry = < 3kPa (30m/bar/0.44psig). It should have maximum working pressure 0.5barg(7psig. It should have manual drain valves and 250ml sterilisable glass drain flasks.(Maximum tolearance allowed will be only 10%).Smooth mobility.Sturdy trolley mounted on 5 castor base wheels.Operational when connected to centralized vacuum.Fast connection to the vacuum source.Various Vacuum Connector options.Controllable & Stable vacuum for procedure.Step-less vacuum regulation within the range.Gauge needle with anticlockwise movement .Vacuum trap with bacterial filter in series to protect.system networkDisposable hydrophobic filter element.Quick hassle-free replacement of bacterial filter.Switch toselect collection jar & quicksuction shut-off.Easy access to selector switch.90 degree angular interface connectors to push-fit catheters.Autoclavable Polycarbonate collection jars.Overflow prevention trap on each collection jar.Make- Tridentor Equivalent 34 Ward Vacuum Unit with Regulator, Collection Jar of 1000 ml with Bracket.Make- Altos/Aktiv or Equivalent 35 Theatre Vacuum Unit mounted on Trolley consisting of Vacuum Regulator with Gauge and 2 nos. of 4000 ml Polycarbonate.Make- Altos/Aktiv or Equivalent 36 Bacteria Filter (Plastic) for 100 ml Safety Trap before Vacuum RegulatorMake- Altos/Aktiv or Equivalent 37 COMPRESSED AIR SYSTEM 38 SITC of COMPRESSED AIR SYSTEM AS PER SPECIFICATION 39 Oil Free Scroll Air Compressor: The arrangement should consist of 2 nos.oil free scroll air compressor. It should be rated for 50 Hz, 3 Phase, 415 VAC power supply. Motor rating of each compressor should be 22 Kw & 30 Hp. Each scroll compressor should have a flow capacity of minimum 73 cfm (2070 LPM). The scroll air compressors shall be air cooled. Compressors shall be oil free scroll compressors suitable for both continuous and frequent start/stop operation having outlet pressure control range of 800 to 1000 kPa (8 to 10 bar). Each compressor shall have at least two individual scroll elements. The air quality shall be 100% oil free, certified ISO8573-1. The compressor shall have a sound insulating enclosure. Each scroll air Compressor should have an element consists of a fixed scroll shaped housing and a scroll shaped rotor. Air enters the compressor element through inlet opening. Once the air is drawn in, the orbiting scroll seals the inlet opening and forces the air into a continuously decreasing space. As scroll keeps orbiting, this process of compression is constantly repeated, resulting in discharging of oil free compressed air through outlet opening. Air is drawn through air filter and should be compressed by the compressor element of each compressor module. The compressed air is discharged via the check valve and a common air cooler. The cooling air is blown over the compressor element via a duct. A separate electric fan provides cooling air for the common air cooler. Each set of compressor modules has its own common aftercooler with an electric fan. The separator on compressors without integrated dryer has an automatic condensate outlet and a manual drain valve. The air compressors with integrated dryer, the dryer is equipped with a trap with an automatic condensate outlet and a manual drain valve. Each compressor element is protected by a sensor in the outlet pipe. The sensor is connected to the electronic regulator. Make- multitech/hitachi/Anistaiwata or Equivalent 40 Air Receiver of 5000 Liter Water Capacity (designed to withstand pressure of 10 Bar) with Auto Drain ValveMake-multitech/ hitachi or Equivalent 41 Medical Breathing Air Dryer- 375 SCFM - Medical air dryer heatless with purification modules are intended to provide a continuous supply of medical quality air conforming to the European Pharmacopoeia medicinal air monograph (ref. 1238), for respiratory use in healthcare facilities. The system shall be duplex such that the supply is maintained in single fault condition. Medical compressors shall be provided such that the specified volumetric flow is achieved without standby or backup systems running. Purification Module : The duplexed filter and dryer module shall incorporate high efficiency oil coalescing filters, heatless regenerative desiccant dryers, activated carbon filters and bacterial filters. The performance of the filters shall be according to below specifications: Oil coalescing high efficiency filter: mass efficiency of 99,92%, tested according to ISO 8573-2 & ISO 12500-1; Activated carbon filter: max remaining total oil content of 0,003 mg/m³, tested according to ISO 8573-5 & ISO12500-2;Bacterial filter: particle count efficiency of 99,98% at MPPS=0.06μm, tested according to ISO 12500-3. Dryer Purge Control : The dryer control system shall incorporate a Purge Saver Energy Management system that freezes the regeneration of the desiccant once adequate dew point is reached in the inactive tower. Only when the dewpoint level in the active tower deteriorates to an unacceptable level will the intelligent controller switch towers.Coarse coalescing filter of 375 SCFM (one working and one as stand by) flow capacity: It should have flow-optimized design for advanced filter head design for optimized flow performance. It should have flexible installation Modular design and accessible fixings enable simple close coupling assembly. It should comply with air quality standard ISO 8573-1: 2010. It should have profiled bowl design and push fit elements ensure quick and for reliable maintenance. It should have corrosion protection Internal and external electrophoretic paint finish followed by a tough exterior polyester powder coating. It should have color coded element end caps of red color for easy and accurate grade identification. It should have element of E30612 grade.It should have particle retention of up to 99.999%, and significantly reduced pressure loss. It should have particle removal 1 micron. It should have maximum particle size class 2 micron as per ISO 8573-1: 2010 . It should have maximum oil content 3 micron ISO 8573-1: 2010.It should have maximum oil carryover at 68 degree F (20degree centigrade) = 0.3ppm (0.3mg/m3). It should have pressure loss clean & dry = 0.8psi (55m/bar). It should have pressure loss saturated = 1.8psi (125m/bar). 42 Fine coalescing filter of 375 SCFM (one working and one as stand by) flow capacity : It should have flow-optimized design for advanced filter head design for optimized flow performance. It should have flexible installation Modular design and accessible fixings enable simple close coupling assembly. It should comply with air quality standard ISO 8573-1: 2010. It should have profiled bowl design and push fit elements ensure quick and for reliable maintenance. It should have corrosion protection Internal and external electrophoretic paint finish followed by a tough exterior polyester powder coating. It should have color coded element end caps of blue color for easy and accurate grade identification. It should have element of E30612 grade.It should have particle retention of up to 99.999%, and significantly reduced pressure loss. It should have particle removal 0.01 micron. It should have maximum particle size class 1 micron as per ISO 8573-1: 2010 . It should have maximum oil content 1 micron ISO 8573-1: 2010.It should have maximum oil carryover at 68degree F (20degree centigrade) = 0.01ppm (0.01mg/m3). It should have pressure loss clean & dry = 1.2psi (85m/bar). It should have pressure loss saturated = 1.8psi (125m/bar). Activated Carbon Filter of 375 SCFM (one working and one as stand by) flow capacity: It should have flow-optimized design for advanced filter head design for optimized flow performance. It should have flexible installation Modular design and accessible fixings enable simple close coupling assembly. It should comply with air quality standard ISO 8573-1: 2010. It should have profiled bowl design and push fit elements ensure quick and for reliable maintenance. It should have corrosion protection Internal and external electrophoretic paint finish followed by a tough exterior polyester powder coating. It should have color coded element end caps of black color for easy and accurate grade identification. It should have element of E30612 grade.It should have particle retention of up to 99.999%, and significantly reduced pressure loss. It should have particle removal 0.01 micron. It should have maximum particle size class 1 micron as per ISO 8573-1: 2010 . It should have maximum oil content 1 micron ISO 8573-1: 2010.It should have maximum oil carryover at 68degree F (20degree centigrade) = 0.003ppm (0.003mg/m3). It should have pressure loss clean & dry = 1.7psi (115m/bar). 43 Fine Dust Filter of 375 SCFM (one working and one as stand by) flow capacity : It should have flow-optimized design for advanced filter head design for optimized flow performance. It should have flexible installation Modular design and accessible fixings enable simple close coupling assembly. It should comply with air quality standard ISO 8573-1: 2010. It should have profiled bowl design and push fit elements ensure quick and for reliable maintenance. It should have corrosion protection Internal and external electrophoretic paint finish followed by a tough exterior polyester powder coating. It should have color coded element blue color end caps for easy and accurate grade identification. It should have element of E30612 grade.It should have particle retention of up to 99.999%, and significantly reduced pressure loss. It should have particle removal 0.01 micron. It should have pressure loss clean & dry = 1.5psi (100m/bar). Make- Trident or Equivalent 44 Pressure Reducing Station for 4 Bar: The compressed air system shall be supplied with duplex pressure regulator arrangement to regulate the line pressure from 10 bar to 4 bar for medical air. Adequate number of isolation valves should be provided to isolate each regulator separately during maintenance without shutting down the entire compressed air system. Presssure Regulators should be 28 bar rated. Brass pressure relief valve, 1/4 thread BSP should be provided after the regulator. Pressure Gauge of range 0 to 11 bar to be provided to monitor line pressure. Relief Valve Settings : Nominal 4 bar stations - 5.5 bar relieving.The Pressure Reducing Station should be capable of delivering minimum 10000 LPM flow.It shall be duly CE marked to the Medical Device Regulations and under this regulations, med gas products are classified as Medical Devices. 45 Pressure Reducing Station for 7 Bar: The compressed air system shall be supplied with duplex pressure regulator arrangement to regulate the line pressure from 10 bar to 7 bar for surgical air. Adequate number of isolation valves should be provided to isolate each regulator separately during maintenance without shutting down the entire compressed air system. Presssure Regulators should be 28 bar rated. Brass pressure relief valve, 1/4 thread BSP should be provided after the regulator. Pressure Gauge of range 0 to 11 bar to be provided to monitor line pressure. Relief Valve Settings : Nominal 7 bar stations - 9 bar relieving.The Pressure Reducing Station should be capable of delivering minimum 4000 LPM flow.It shall be duly CE marked to the Medical Device Regulations and under this regulations, med gas products are classified as Medical Devices. 46 SITC of Medical Gas Outlets- 47 Probes are crucial for gas specific and stable connection. These are used to connect medical gases and vacuum devices to outlets / terminal units of MGPS distribution network.Make- Altos/Altos/Aktiv or Equivalent 48 FeaturesSmooth quiet action.Safe keying configurations.Gas specific ISO 32 colour coding.Firm locking of connector / probe.Strong, positive and secure connection.Corrosion-free and material compatibility.Reliable and safe dispense of gases & vacuum.Pipe stub end flared to align drop pipe and to avoid butt joint. 49 Oxygen 50 Air-4 51 Air-7 52 N2O 53 AGSS 54 Vacuum 55 CO2 56 Certifications:ISO 13485:2016 – Medical devices,ISO 9001:2015 57 MISCELLANEOUS ITEMS 58 SITC of Common Electrical Control Panel for Compressed Air System, Vacuum System & AGSS as per requirementcomplete with plant room wiring. 59 SITC of Degreased Medical Grade Copper Pipe as per EN 13348 :2018. BSI Kite Mark certified. CE Certified. Third Party Inspection by TUV or Lloyds Registrara AsiaMake- Altos/Altos/Aktiv or Equivalent 60 Installation of piping should be carried out as per international standards with utmost cleanliness. Only pipes, fittings and valves which have been degreased as per International standards should be used . Pipe fixing clamps for upto 28mm diameter. Pipes should be non ferrous suitable for the diameter of the pipe. For the pipes of the sized above 28mm rigid metallic hanging or cemented supports to be used. 61 The main lines to the building to be taken overhead through metallic poles or through underground ductswith inspection removable slabs,All pipe joints should be made using inert gas fluxless brazing method.Alljoints should be of copper to copper and should be brazed by silver brazing filler material without flux while being brazed joints shall be continuously purged with oil free dry nitrogen to prevent the formation ofcopper oxide on the inside surface of the joint.All pipes should be installed without springing or forcing.All pipes shouldprotected against mechanical injury in a manner satisfactory to authorities havingjurisdiction. 62 Test: After erection, all the new pipes cleaned or purged with the help of dry nitrogen gas.Complete system should be tested with dry nitrogen at 2 times of working pressure for 24 hours. 63 Painting: All existing and proposed exposed pipes/should be painted with two coats of Synthetic enamel paint & color codification as per international standards.All concealed pipes to have gas identification bands / labels at appropriate distance.Similarly all pipes which need embedding in the wall should be tested/painted/labeled and properly insulated. 64 Solid drawn, seamless, deoxidized, non arsenical, half hard, tempered and degreased materials conforming to BS: EN 13348. 65 All copper pipes will beUL certified for medical use before dispatch and the pipe will be delivered plugged or capped at both ends. 66 108 mm OD X 1.5 mm thick 67 76 mm OD x 1.5 mm thick 68 54 mm OD x 1.2 mm thick 69 42 mm OD x 1.2 mm thick 70 35mm OD x 1.2mm thick 71 28 mm OD x 1 mm thick 72 22 mm OD x 1 mm thick 73 15 mm OD x 1 mm thick 74 12 mm OD x 0.7 mm thick 75 SITC of Medical Gas Digital Area Alarm System 76 Microprocessor based digital LCD alarmHighly visible 7 (178 mm) LCD screenPressure sensing through piezoresistive sensing technologyAlarms can be monitored audio-visualTouch screen operationComprehensive monitoring of all the medical gas alarm panelsData display at a central monitoring station Features-Alarm status will be visible through ethernet port on master alarmPressure Equipment Directive 2014/68/EUDigital Flow Care Alarm Management of Medical Gas Pipeline SystemReal time updating of statusOperational parameters i.e. high and low level canbe set “in-situ” to suit requirement in an area 2Programmable pressure unit display (bar, kg/cm & mmHg)Audio mute optionDesigned to serve 2, 3, 4, 5 & 6 gases including VacuumNIST connection for Gas inputPowered by 220V AC to 24V DC external adapterMake-Altos/Aktivor Equivalent 77 Conforms to: IS / ISO 7396 - 1 : 2016 + A1 : 2017HTM 02-01 Part A, IS / ISO IEC 60601 - 1 : 2015 + A1 : 2020Certifications:ISO 13485:2016 – Medical devices – Quality Management SystemsISO 9001:2015 - Quality Management Systems 78 6 - Gas (O2, N2O, Med Air-4 Bar, S Air-7 Bar, Vacuum & CO2) 79 5 - Gas (O2, N2O, Med Air-4 Bar, S Air-7 Bar & Vacuum) 80 4 - Gas (O2, N2O, Med Air-4 Bar & Vacuum) 81 3 - Gas (O2, Med Air-4 Bar & Vacuum) 82 2 - Gas (O2 & Vacuum) 83 SITC Of Area Valve Service Unit with Valve & Gauge 84 The importance of full bore ball valves is to reduce pressure drop to almost negligible in the pipeline distribution system so that the designed pressure is available at the outlet point. Ball Valves are used to start or stop a flow. In Medical Gas Pipeline System (MGPS), the valves are normally kept open i.e. allow the gas to flow unless it is required to shut-off the gas supply for scheduled maintenance or emergency situation 85 Features-Operational parameters can be set in-situDigital pressure unit display options -psi / bar or kg/cmDigital & illuminated LED display of “Normal”, “High” & “Low”Microprocessor based moduleHighly accurate “Heavy Duty” pressure transducerPowder coated aesthetically designed enclosureEnclosure separable from the base for ease of installationReusable lock assemblyAudio mute optionPED: 2014/68/EU certified full port Ball Valve (PN 30)Long extension copper pipes to connect MGPS networkFront door opens up vertically for comfortable accessDesigned to serve 2, 3, 4 & 5 gas moduleSuitable for all medical Gases & VacuumMake- Altos/Aktiv or Equivalent 86 6 Gas Service (O2, N2O, Med Air-4 Bar,Air-7 Bar, Vacuum & CO2) 87 5 Gas Service(O2, N2O, Med Air-4 Bar, Air-7 Bar & Vacuum) 88 4 Gas Service(O2, N2O, Med Air-4 Bar & Vacuum) 89 3 Gas Service (O2, Med Air-4 Bar & Vacuum) 90 2 Gas Service(O2 & Vacuum) 91 SITC of Degreased Medical Lockable Ball Valve with Pipe line assembly 92 Pre piped single port) for size upto 2 (for 54mm copper pipe): Pre Piped Degreased Ball Valve with pipe extension. It should be full-port design. It shouldbe blow-out proof stem. It should be lockable valve. The Valve shall be 3 piece ball-type design with a bronze body and chrome plated brass ball for sizes 1/2” to 4”. Seats shall be Teflon (TFE) and seals Viton for 1/2” - 4” valves. A blow-out proof stem shall be used and the valve shall have a maximum pressure rating of 600 psi [4,137 kPa].Valves shall be operated by a lever-type handle requiring only a quarter turn from a fully open position to a fully closed position. Valves shall be designed in such a manner that it can be “swung-out” during installation so as to prevent damage due to heat transfer during the brazing operation. Each valve assembly shall be washed and degreased for medical gas service. The valve shall be supplied in a sealed plastic bag to prevent contamination prior to installation.Make- Altos/Aktiv or Equivalent 93 12mm 94 15 mm 95 22 mm 96 28 mm 97 35mm 98 42 mm 99 54 mm 100 108mm 101 SITC of Bed Head Panel aluminum powder coated with mininum 3 channel and 3 duct with separate partition rows and built in aluminum railMake- Altos/Aktiv or Equivalent 102 Bedhead panel for Low Equity Ward Areas, 1500mm length, with provision of Gas outlets & provided with electrical sockets & accessories complete 103 Horizontal Bed Head Panel – For 2 Gas Service (Oxygen & Vacuum) 104 Horizontal Bed Head Panel – For 3 Gas Service (Oxygen, Med Air-4 Bar & Vacuum) 105 Horizontal Bed Head Panel – For 3 Gas Service (Oxygen, N2O & Vacuum) 106 Horizontal Bed Head Panel – For 4 Gas Service (Oxygen, N2O, Med Air-4 Bar & Vacuum) 107 Special FeaturesInnovative design – Efficient, simple & accessibleVersatility – Configurable & economic adaptation of various servicesAesthetics – High quality surface finish, epoxy coated to RAL 7035(Textured)Smooth profile – Minimize adherence of dust particlesExtruded aluminium frame – Rigidity & ease of interior accessability to serviceSeparate compartments - for LV, ELV and Piped GasNon-disruptive maintenance of BS Outlet - Shut down of line gas is avoidedOption of concealed gas connections and choice of outlet 108 Application AreasInnovative design – Efficient, simple & accessiblityVersatility – Configurable & economic adaptation of various servicesAesthetics – High quality surface finish, epoxy coated to RAL 7035(Textured)Smooth profile – Minimize adherence of dust particlesExtruded aluminium frame – Rigidity & ease of interior accessability to serviceSeparate compartments - for LV, ELV and Piped GasNon-disruptive maintenance of BS Outlet - Shut down of line gas is avoidedOption of concealed gas connections and choice of outletAdult in-patient wards/ General WardsResuscitation RoomsPost-anaesthesia areaEmergency Admission WardsDialysis Stations 109 Configuration : 5 Outlets & 6 Multi Standard 220V AC sockets, 1 each RJ11 Telephone socket & RJ45 Data Socket and provision of protective earth (Earthing) 110 Modular Operation Theatre (Part-B) 111 WALL AND CEILING MODULAR PUF PANEL 112 The panels shall be made of durable and uniform material that shall be easy to clean and extremely hygienic. Operation theatre shall not have any sharp edges, corners and shall not support bacteriological or fungicidal growth and shall be resistant to most chemicals, commonly used in Hospital Departments. Joints in the panels in the operation theatre shall be sealed. The function of sealing shall assure an airtight environment in the room and eliminate services to prevent dust accumulation.PUF Panel with an overall thickness of 50 mm for wall and 30 mm for ceiling, made of 0.8mm (make-Tata/jindal)GI Front sheet and 0.6mm PPGI back wall with infill of PUF at 40 kg/m3 (40D)which is necessary for mechanical strength. Panels shall be mounted on a structure made of galvanized steel and shall enable the distribution of medical gases, electricity, sewerage inside the wall.PUF Panel as above has better thermal efficiency and thus saving on energy cost. Proposed system shall be installed at site without any welding.The partitions shall not have corners; adjacent surfaces shall be molded flush.Upper wall element shall have sufficient height to reach the lower edge of the prefabricated ceiling. All the sharp edges and corners should be chamfered to avoid bacterial contamination.The individual ceiling panels shall use the tongue and groove technology for joining two panels, no welding shall be allowed,provides a seamless sub-structure, which is then sanded smooth finished with Metal Putty and then painted using imported anti-fungal paint to give a smooth, non-porous seamless finish and without corners by providing coving on floor as per standard.It is resistant to chemicals used in Operation Room for moping and fumigation repeatedly.Make-Jindal/Tata or Equivalent 113 WALL AND CEILING MODULAR PUF PANEL-SS304 114 The prefabricated Operating Room should be of SS Sandwich as per its latest standards. SS Sandwich : It should have at least min. 0.8 mm 304 Grade Stainless Steel on front side and 0.5mm PPGI back side . The sandwich panel shall have a core consisting of rigid polyurethane foam, injected under high pressure, with a minimum density of 40 kg/m3. Cladding structure insulated stainless steel wall panels with total panel thickness 50 mm for wall and 30mm for ceiling.The individual wall panels shall use tha tongue and groove technology for joining two panels, no welding should be allowed. The gaps between panels shall be suitably filled with metal filler and sanded flush. Stainless steel plate finished to fine grain surface, treated properly to take antifungal paint panelingshould be easy to maintain, durable, antistatic / conductive and fire retardant. Clearance between inner panel and outer wall should be sufficient to allow the maintenance personnelfor service. This closed space should be flushed continuously to eliminate dust and bacterial accumulation.It should have minimum number of junctions. The junction should be seamless and should be sealed with suitable sealants. Third party test certificate for SS from material testing lab. (Govt. authorized)required.Make-Jindal/Tata or Equivalent 115 ANTI-FUNGAL PAINTING 116 Anti microbial Paint for Different Areas antibacterial Paint on wall and ceiling panels Inside OT work.Anti-Microbial Protection: These product hygiene coatings start the biocidal action as soon as the microorganism land on the surface, and prevents the growth of mould, bacteria and yeasts for at least 5 years.Minimum three coats of Anti Fungal/Bacterial Paint, glaze or equivalent to a minimum dry thickness of 300 microns to give smooth , non-porous finish without any corners.It will also be resistant to the chemicals used in Operation Room for Moping & Fumigation repeatedly. This Hygiene coating are independently tested by leading universities to demonstrate resistance.Make-SKK/ Jotun or Equivalent 117 PLENUM LAMINAR AIR-FLOW 118 Supply and installation of Plenum LAMINAR FLOW- Plenum Box Ceiling mounted systemwith unidirectional airflow, SPECIFICATIONS-PLENUM UNIT - The complete unit factory designed and manufactured with proper air-sealing. It seamlessly integrates with OT ceiling mounted equipment.Plenum size- 2400 x 2400mm with aluminium material.Diffusers are made of SS304 punched/perforated sheet for unidirectional diffusion air. The complete unit factory designed and manufactured with proper air-sealing.It seamlessly integrates with OT ceiling mounted equipment.The material used is non-corossive as per standard guidelines such as Aluminium.Make-Jindal/Tata or Equivalent 119 Hepa Filters- 120 The filter hosing on either side houses provided with HEPA minipleate H13/H14 filters.The system has a reliable filter efficiency, filters are designed to remove particles and germs with the use of H13/H14 filters retaining 99.97 % of the particles and germs.Frame : Aluminium Mini Pleat Size- 610x610x125mmMOC of the Media : Micro Fibre Glass micro drawn grid Separators : continuous Gasket: Food GradeMPPS average efficiency: > 99.95% 3 Micron D Efficiency: 99.97% down to 0.3µ.Maximum Operating Temp : 60 degree CelsiusMake- Thermadyne or Equivalent 121 ANTI-STATIC VINYL FLOORING: 122 SupplyandinstallationofImportedVinylFloor:SeamlessantistaticconductiveESDvinylflooringsystem,2mmthick, with perfectly curved flush covings and copper strips for earthing, all joints welded properly including wall scatting.SPECIFICATIONS:- Flooringinoperationtheaterroomwii beseamless withperfectly curvedflash-covings,resistance tomechanicalstressanddynamicloadsandhavingESD/EMI(Conductive)protectioncharacteristics,2mmthick, washablevinyl.Flooring is a static-conductive,flexible homogeneousvinyl floor covering withan electricalresistance of 5x10^4 123 SELF LEVELLING MATERIAL. 124 The SLC should be of Portland cement-based, It should be self-leveling underlayment formulated with a special blend of polymersusedtolevelandsmoothinteriorconcrete,terrazzo,ceramicandquarrytile,epoxycoatingsystems,metal andnon-watersolubleadhesiveresidueonconcretepriortotheinstallationoffinishedflooring–on,aboveorbelow grade.TheSLCshouldprovideadurable,flat,smoothfloor surfacewithminimumlabor andinstallationtime.Itshould be pourable or pump-able when mixed with water and should seek its own level to produce a smooth, flat, hard surface. 125 OPERATION THEATRE CONTROL PANEL: 126 Supply and installation of Membrane type 6 services OT control panel , with distribution box mounted flush in the theatre wall, comprising of the following:The surgeon control panel should meet Electrical safety codes for high & low voltage system, wired to the current IEE regulations.The room Surgeon’s control panel should be modifiable with changing technology& equipment in operating environments. Control Panel will be user friendly & ease of operating & maintaining purpose.he panel should be “Membrane” type; configured to incorporate all the services that operation room staff required. The fascia should be made with superior quality UV resistance membrane with sterilization feature.The Panel should contain 6 or 9 service tiles as below:1. Time Day Clock. 2. Time Elapse Day Clock. 3. General Lighting System.4. Medical Gas Alarm Panel. 5. Hand Free Telephone set with memory.6. Temperature & humidity indicator with controller.7. HEPA Filter Status module. 8. Room Pressure Indicator. 9. Music control. Time day clock should be digital type & clocks having high brightness characters. Time Elapsed Day Clock should be digital type & clocks having high brightness characters.Temperature indicator should indicate the room temperature which should be connected to the local pressure switches of Air-Conditioning System. Indicators should be digitaltype & clocks having high brightness characters, not less than 30 mm in height. Central Lighting system should incorporate all the necessary controls of the lighting. system inside the theatre.The medical gas alarm should indicate High, Normal & Low gas Pressure for each gas service present in the operating system & should have an audible buzzer with mute facility. Pressure sensors should be connected to MGPS for monitoring the pressures.A hand free set Telephone System should be incorporated in the panel with memory type card.The control panel should be designed for front- access only. All internal wires should beMake- Altos/DGline or Equivalent 127 Distribution Board outside OT 128 Electrical Distribution Board will have all high voltage equipment should be installed in a separate enclosure. The remote cabinet should house the operating transformers, light control relays, electrical distribution equipment and circuit protection equipment for all circuits withinthe operating theatre. All internal wiring should terminate in connectors with screw mounted, on a DIN rail. Individual miniature circuit breakers will protect all internal circuits. All high voltage equipment should be installed in a separate enclosure.All internal wiring should terminate in connectors with screw & clamp springConnections of the clip- on type mounted, on a CE/ / ICMED9001/ ICMED13485 approved rail & labeled with indelible proprietary labels.Individual fuses or miniature circuit breakers should protect all internal circuits. 129 LED PERIPHERAL/GENERAL LIGHTS: 130 Recess mounted sealed IP54 Protocol, non-hygroscopic peripheral lights ( 1 x 2 ) having compact high glow low wattage LED lighting system. These lights are having electrical safety code for high & low voltages.The luminaries for recess mounting in operation theatres should flush with the ceiling based on LED, with optical anti- glare system for individually adjustable light distribution.Luminaries cover made of highly-resistant, disinfectant-proof acrylic diffuser with white coated steel frame.Closing devices are integrated automatically in the electrical safety control without lines having to be connected to the luminaries housing. Luminaries’ body made of sheet steel, white, powder-coated, supplied ready for connection optionally for individual or group with power saving technology. Luminaries with protection IP 65, and protection class I,230 V,50 Hz.Recess frames for the gas-tight installation of clean-room luminaries in IP 65 in suspended ceilings.Frame made of extruded aluminium profile, white, powder-coated, able to be put together to form a rigid, continuous frame by means of plug and screw connections.Control equipment for the general lighting and the light dimming should be provided in the theatre Control Panel.Make-Altos/DGline or Equivalent 131 LED X-RAY VIEW PANEL: 132 TwoPlateX-RayViewScreenwithflickerfreeilluminationhavingimportedLEDsystemforuniformilluminationand operated by X-ray film .Thesystemhavingelectricalsafetycodesforhigh&Lowvoltagesystem.Itshouldbedesignedtoprovideflickerfree luminance for the film viewing purpose.It should be installed flushed with the theatre wall for hygiene and ease of cleaning.Make-Altos/DGline or Equivalent 133 MAGNETIC LISTING WRITING BOARD: 134 MagneticWritingBoard of size940x 640x50mmcomprisesof aflushmounted,1.50mmthick,whitelaminate board, bonded toa 10 mm high density fibreboard sheet for additional rigidity.The writing unit should comprise of flush mounted white laminate board, be opened to create a wall mounted writing surface within the operating room. The white board should be constructed from white laminate board.Make- Altos/Dgline or Equivalent 135 AUTOMATIC HERMETICALLY SEALING SLIDING DOOR -1500mmX2100mm 136 Automaticoperated Hermettically Slidingdoor with High Pressure Laminate on both side, Door size (1500mm wide2100mmheight)completewithdoubletoughnedglassvisionwindowof300mmx300mm withinanaluminum extrusionhighqualityframecompletewithrequiredaccessories.Thedoorframesconsistofreinforcedplasterboard panelsfacedwiththesamelaminateasthedoorandwillbeedgedwithanaluminiumextrusionandwithconcealed fixings that are adjustable during installation to ensure sealing.• Environment temperature should be -20°C to +55°C.The doorframe should be made of high quality anodize aluminum and the door panel should be made of compact laminate that can withstand high abrasion. To ensure efficient sealing of the doors frames should be provided. They will consist of reinforced plasterboard panels faced with the same laminate as the doorsVision panels, 300mm X 300 mm should be provided in the doors.The Door should be mounted and should complete with all necessary accessories i.e.Door closer, D type SS Door HandleMake-Metaflex/Doormedor Equivalent 137 HERMETICALLY SEALING HING DOOR-900mmX2100mm 138 Manually operated Hermettically Semi- sealed Hing door with HighPressure Laminateon bothside, Door size (900mm wide x 2100mm height) complete with double toughned glass vision window of300mm x300mm andsmooth effortless doorcompletewithrequiredaccessories,fixedfirmlytothewall.Thedoorframesconsistofreinforcedplasterboard panelsfacedwiththesamelaminateasthedoorandwillbeedgedwithanaluminiumextrusionandwithconcealed fixings.• Environment temperature should be -20°C to +55°C.The doorframe should be made of high quality anodize aluminum and the door panel should be made of compact laminate that can withstand high abrasion. To ensure efficient sealing of the doors frames should be provided. They will consist of reinforced plasterboard panels faced with the same laminate as the doorsVision panels, 300mm X 300 mm should be provided in the doors.The Door should be hinge mounted and should complete with all necessary accessories i.e.Door closer, D type SS Door Handle. The door track is constructed from an aluminium extrusion, fixed firmly to the wall. Nylon runner guides are fixed to the floor in such a way that they do not obstruct trolley movement through the door.Make-Metaflex/Doormed or Equivalent 139 CORNER GRILLS 140 Aluminium corner grills are used to air exhaust at all four corners.size of grill will be 600mmX400mm.Duly powder coated extruded aluminium linear horizontalfixed bar with normal 15 deg. blade having pitch of 13 mm.Exhaust Gril for return air-The exhaust air cabinets should be openable and cleanable. These cabinets should have suction from bottom.Distribution of exhaust air volume should be divided between fluff strainers to maintain the required pressure within the theatre without causing turbulence.The Exhaust air cabinet should be manufactured and supplied by the supplier of wall and ceiling system supplies. Also it should match perfectly with the ceiling system aesthetically.Make-conair/Bala ji engineering or Equivalent 141 ALUMINIUM DUCTING: 142 Aluminium Ducting ( 22 gauge ) with curves & bends where indicated for easy flow of air tight by applying silicon sealant after fabrication.Hangers will be provided to ducts & will be suspended be means of G.I. coated rod & these will not be more than 2.5 mtrs apart.Thermal insulation with 9/13mm XPE with aluminium foil for supply & return air ducts.Joints will be lapped with Nitrile tape for better insulation. (Laminar to AHU & Return air in all four corners) AHU to be placed near OT, not more than 6 meter.SITC OF Hand fabricated rectangular Aluminum Ducting in accordance with the approved ducting lay out drawing, complete with all accessories , dampers, guide, vanes, support, etc.Make-Hindalco/Virgo or Equivalent 143 AIR HANDLING UNIT 144 AHU System & Condensing Unit with consistingDOUBLE SKIN CASING: Outer Skin 0.6 mm Pre- Coated GI Inner Skin 0.6 mm Plain GI Frame Work Hollow Extruded AL Profile Thickness of Insulated Panels 25 mm thick, CFC Free PUF injected (Density: 40 kg / Cu. m.) Material ofDrain Pan 20 G SS-304 Tray duly insulated with 13 mm closed cell Nitrile insulation. Unit Base G.S.S Base Channel DX COIL: Make Of Coil ZECO Coil Casing / Blank offs GI Material Of Tube Copper (IGT) Tube Dia (mm / inch) 9.52 mm / 3/8” O.D. Thickness of tube (SWG / mm) 25 SWG / 0.5 mm Header Material Copper Thickness & Material of fins 0.15 mm Plain Aluminum No. of Fins per inch (FPI) 11 / 12 FILTERS: Media of Filters Synthetic (non woven type) Efficiency of Pre-filters (EU-4) 90 % down to 10 micron. Efficiency of Fine-filters (EU-5) 99 % down to 05 micron FAN & MOTOR: Fan make Nicotra Motor make CG Motor type TEFC Squirrel Cage IP 55 Protected VFD Compatible induction motor VFD: VFD make DELTA DOUBLE SKIN FLOOR MOUNTED HORIZONTAL AIR HANDLING UNIT SHALL HAVE:(WITH 25MM THICK PANEL) ◻ Mixing box with manually operated FA & RA damper in GI constructionDOUBLE SKIN CASING: Outer Skin 0.6 mm Pre- Coated GI Inner Skin 0.6 mm Plain GIFrame Work Hollow Extruded AL ProfileThickness of Insulated Panels 25 mm thick, CFC Free PUF injected (Density: 40 kg / Cu. m.) Material of Drain Pan 20 G SS-304 Tray duly insulated with 13 mm closed cell Nitrile insulation. Unit Base G.S.S Base ChannelDX COIL: Dx type coils having suitable number of distributors for connecting expansion valve with condensing unitsMake-Zeco//VTS or Equivalent 145 Make Of Coil Casing / Blank offs GI Material Of Tube Copper (IGT)Tube Dia (mm / inch) 9.52 mm / 3/8” O.D. Thickness of tube (SWG / mm) 25 SWG / 0.5 mm Header Material CopperThickness & Material of fins 0.15 mm Plain Aluminum No. of Fins per inch (FPI) 11 / 12FILTERS: Media of Filters Synthetic (non woven type)Efficiency of Pre-filters (EU-4) 90 % down to 10 micron. Efficiency of Fine-filters (EU-5) 99 % down to 05 micron VFD: DOUBLE SKIN FLOOR MOUNTED HORIZONTAL AIR HANDLING UNIT SHALL HAVE: (WITH 25MM THICK PANEL)Mixing box with manually operated FA & RA damper in GI constructions.Filter section with 50 mm thick (EU-4) box type pre filter with 305 mm thick (EU-5) bag type fine filter mounted on common filter frameCoil section with 6 row deep DX cooling coil with suitable distributor. Heater Section with GI strip Heater.Fan section with SISWbackward curved plug fan & Motor (IE-2). Manually operated SA damper in GI construction.Tonnage TR 8.5 Air Qty (CFM) 3500SP (mm wg) 125 UnitFan Type Plug Fan-355Fan model RLC E6-3135-23-19 Fan RPM 3400Motor RPM 2880Shaft Absorbing Power 3.2 Motor Rating (kw) 3.7 Motor pole 2Coil area (Sq.Ft.) 7.0 DX Cooling Coil RD 6 Distributor 1Heater KW3Filter area (Sq.Ft.) 8.0 Length (mm) 2500Width (mm) 1400 Height (mm) 945 146 AIRCONDITIONING: (8.5 T AC ) 147 Nominal Cooling Capacity-8.5tr,102000Btu/hr,29894watt Nominal Air Quantity-6250CFMPower Supply (V-ph-Hz)-400 ± 10% -3-5 Fan-PropellerDischarge-HorizontalFan Motor-Permanent Split Capacitor Type Power (watt)-470Control Type-LED DisplayOverall dimensions (mm)-982 X 610 X 1100 mm- Compressor- Scroll CompressorRefrigerant-R-410A (5.6) Liquid Line-5/8Suction Line-1-1/8Make- Carrier or Equivalent 148 ELECTRICAL WIRING INSIDE THE OT 149 Electrical Wiring as per requirement of OT, Wiring With OT distribution electrical Panel. ( Power cable at OT with Main distribution Panel will be provided by customer) Operation theatre shall be installed in the remote cabinet.All electrical wiring should be terminated to the connectors mounted on DIN/CE approved rail and labeled with indelible labels.Individual fuse and miniature circuit breakers should protect all internal circuits.Complete schematic diagram drawing description should be enclosed with the equipment. Makes:Scheinder/PolyCab/ Schematic.Supply, Installation, Testing and Commisnoing of Electrical Distribution Board with required MCB : It should be installed in a separate enclosure.Transformers,Mains,Relays,Circuitprotectiveequipment,forallcircuitsofOperationtheatreshallbeinstalledinthe remote cabinet. 150 MEDICAL GAS PIPE-LINE SYSTEM INSIDE OT 151 Medical Gas Pipe Line inside the OT above ceiling as required, complete with valve box and other required fitings. Medical Gas copper pipeline inside the OT and the Provision to connect to Pendant Systems (inside OT only).It should be confirm and meets with BS:EN:13348:2008 copper pipes.All medical grade degreased copper pipes must be inspected and duly Third Party Certified by Lloyd’s Registered Asia. Medical Grade Copper pipes manufactured from Phosphorous de-oxidized non-arsenical copper to BS:EN: 1412:1996 grade CW024A (Cu-DHP) manufactured to metric outside diameters and having mechanical properties in accordance with BS:EN: 13348:2008 & 250 or 290 (Half hard).Degreasing of pipe shall be such that there is less than 20 mg/m2(0.002mg/cm2) of hydrocarbons on the degreased surface when tested by the method specified BS:EN:13348:2008.Make- Altos/Aktiv/Mandev tubes/Mehta tubes or Equivalent 152 PASS BOX SIZE-2FTX2FTX2FT 153 Pass Box to remove the waste materials from the Operation Room to the Dirty Linen Area. Each box is equipped with two doors and the door should be operated electronically.. It is designed in such a way that only one door can be opened at one time. UV light is so installed that it is kept on while both the doors are closed and turned off automatically when the doors are opened. Indicators on both side of the Operation Room for Door Open/Close status. It is made of SS-304 Grade.Make- Jindal/Tata or Equivalent 154 STORAGE UNIT 155 Storage Unit of size 850x1600x350 mm has made of 1.6mm galvanised steel sheet. The exterior glass doors has lockable with magnetic push-button for easy opening. Removable toughened glass shelves of thickness 5 mm will be provided with the storage units.Make- Jindal/Tata or Equivalent 156 Pressure Relief Dampers 157 Pressure relief dampers should be provided in each room to prevent contamination of air from clean and dirty areas. Suitably sized air pressure relief damper should be strategically placed, enabling differential room pressure to be maintained and ensure that when doors are opened between clean and dirty areasCounter- weight balancing system should be provided in the PRD to maintain positive pressure inside the operation room.Air pressure stabilizers should have unique capability of controlling differential pressure to close tolerance.The PRD should remain closed at pressure below the set pressure and should open fully at a pressure only fractionally above the threshold pressure.The body of PRD sleeve and Grill should be epoxy powder coated as per standard High grade SS304 Stainless steel plate should be used for body and for bladesMake- Jindal/Tata or Equivalent 158 OT Pendant –Single Arm Anesthesia(Modular) 159 Anesthesia Pendent Systems should have the facility to provide convenient positioning of medical equipment.The support arms should be extremely robust and revolve on high quality bearings, so that the pendant head glides smoothly and quickly to any desired position.The Support arm should have atleast 10 mm thickness throughout to prevent any unnecessary deflection in Arms at given load.Arm Caps should be Aluminum Die casted Powder coated that allows its opening and closing a number of times as compared to ABS/Plastic end caps.High quality bearings shall be used to provide smooth and free movement, minimizing the force required to overcome static friction forces during repositioning. Bearings shall be permanently lubricated and sealed, withno maintenance or replacementPendant arms other than the cantilever lift arm shall be manufactured from extruded aluminium sections and available in various lengths. External surfaces of all arms shall be polyester powder coated in a RAL 9002/9003 finish. Tandem pendants for critical care areas shall be designed so that the consoles can readily swap sides within the bed bay to maximize the flexibility of the workspace.Non-return valves shall be fitted downstream of the connection to the medical / surgical air pipeline to prevent back-flow in the event of low distribution system pressure.Each arm should be capable of 330 – 340 degrees of rotation and be fitted with stops which can be easily adjusted to suit the desired mode of operation.Infinitely variable rotational stops should be available from 0-330 degree which shall enable precise of limits travel to be set to ensure maximum freedom of movement, whilst protecting walls and ancillary equipment.The rotational stops shall be dampened such that when limit of travel is reached, sensitive suspended equipment is not subjected to shock or vibration as the kinetic energy is absorbed.The arms may be fitted with pneumatic brakes or electromechanically breaks to prevent inadvertent movement.It should be possible to replace all medical gas hoses without the need for onsite crimping of ferrules. All medical gas hoses shall be colour coded to as per standard.The Pendant Service Heads / Column should be capable of accepting a range of shelves, drawers and infusion poles or other accessories. The Pendant Heads / column should support the range of Physiological Monitor Mounting Solutions. Service head should designed to host, Base, Gas Module, Electric Module and shelves.Make- Altos/Aktiv or Equivalent 160 The Pendant Service Heads / column should be supplied with medical gas terminal units. The medicalgas outlets fully comply with ISO 7396-1 and DIN 13260-2 standards. Medical gas hoses fully comply with thestandard BS EN 739 and are provided with NIST connectors to this standard. 161 Each anaesthesia pendant should be Single arm having rotational movement with load carrying capacity of minimum 120 kg having following facilities:movable Arm with total coverage of minimum 1000 mm and 330 degree.The Pendant Service Head/column should be modular with minimum 1200 mm head. Gas outlets: O2 – 2 nos, N2O – 2 no, Air (4 Bar) – 2 no, Vac – 2 nos, AGSS – 1 no. Medical rail with brake buttons fitted. - 1 No.Shelf with Drawer – 1 no. Infusion set – 1 no.Electrical Sockets – 10 nos. 6/16 Amp. 6 pin sockets. Pendants should comply with applicable standard:The terminal units must be according to ISO 7396-1 and DIN 13260-2 standards.Medical gas hoses shall be compliant to ISO 5359:2009 colour coded throughout its lengt 162 OT Pendant -SURGICAL PENDANT : 163 Surgon Pendent Systems should have the facility to provide convenient positioning of medical equipment.The support arms should be extremely robust and revolve on high quality bearings, so that the pendant head glides smoothly and quickly to any desired position.The Support arm should have atleast 10 mm thickness throughout to prevent any unnecessary deflection in Arms at given load.Arm Caps should be Aluminum Die casted Powder coated that allows its opening and closing a number of times as compared to ABS/Plastic end caps.High quality bearings shall be used to provide smooth and free movement, minimizing the force required to overcome static friction forces during repositioning. Bearings shall be permanently lubricated and sealed, withno maintenance or replacementPendant arms other than the cantilever lift arm shall be manufactured from extruded aluminium sections and available in various lengths. External surfaces of all arms shall be polyester powder coated in a RAL 9002/9003 finish. Tandem pendants for critical care areas shall be designed so that the consoles can readily swap sides within the bed bay to maximize the flexibility of the workspace.Non-return valves shall be fitted downstream of the connection to the medical / surgical air pipeline to prevent back-flow in the event of low distribution system pressure.Each arm should be capable of 330 – 340 degrees of rotation and be fitted with stops which can be easily adjusted to suit the desired mode of operation.Infinitely variable rotational stops should be available from 0-330 degree which shall enable precise of limits travel to be set to ensure maximum freedom of movement, whilst protecting walls and ancillary equipment.The rotational stops shall be dampened such that when limit of travel is reached, sensitive suspended equipment is not subjected to shock or vibration as the kinetic energy is absorbed.The arms may be fitted with pneumatic brakes or electromechanically breaks to prevent inadvertent movement.It should be possible to replace all medical gas hoses without the need for onsite crimping of ferrules. All medical gas hoses shall be colour coded to as per standard.The Pendant Service Heads / Column should be capable of accepting a range of shelves, drawers and infusion poles or other accessories. The Pendant Heads / column should support the range of Physiological Monitor Mounting Solutions. Service head should designed to host, Base, Gas Module, Electric Module and shelves.The Pendant Service Heads / column should be supplied with medical gas terminal units. The medical gas outlets fully comply with ISO 7396-1 and DIN 13260-2 standards. Medical gas hoses fully comply with thestandard BS EN 739 and are provided with NIST connectors to this standard.Each anaesthesia pendant should be Single arm having rotational movement with load carrying capacity of minimum 120 kg having following facilities:movable Arm with total coverage of minimum 1000 mm and 330 degree.The Pendant Service Head/column should be modular with minimum 1200 mm head. Gas outlets: O2 – 2 nos, N2O – 1 no, Air (4 Bar) – 1 no, Vac – 2 nos.Medical rail with brake buttons fitted. - 1 No.Make- Altos/Aktiv or Equivalent 164 Shelf with Drawer – 1 no. Infusion set – 1 no.Electrical Sockets – 10 nos. 6/16 Amp. 6 pin sockets. Pendants should comply with applicable standard:The terminal units must be according to ISO 7396-1 and DIN 13260-2 standards.Medical gas hoses shall be compliant to ISO 5359:2009 colour coded throughout its length. 165 UV LIGHT INSDIE OT FOR CLEAN/STERILIZE PERPOSE SIZE-2FTX1FT 166 Recess mounted sealed IP54 Protocol, non-hygroscopic UV peripheral lights ( 1 x 2 ) having compact high glow low wattage LED lighting system. These lights are having electrical safety code for high & low voltages.The luminaries for recess mounting in operation theatres should flush with the ceiling based on LED. Ultraviolet (UV) lamps are commonly used in operation theatres for disinfection.Luminaries cover made of highly-resistant, disinfectant-proof acrylic diffuser with white coated frame.Closing devices are integrated automatically in the electrical safety control without lines having to be connected to the luminaries housing. Luminaries’ body made of sheet steel, white, powder-coated, supplied ready for connection optionally for individual or group with power saving technology. Luminaries with protection IP 65, and protection class I,230 V,50 Hz.Recess frames for the gas-tight installation of clean-room luminaries in IP 65 in suspended ceilings.Frame made of extruded aluminium profile, white, powder-coated, able to be put together to form a rigid, continuous frame by means of plug and screw connections.Make- Altos/Dgline or Equivalent 167 Surgical Scrub Station – Two Bay 168 Compact surgical scrub sink should be designed for use in OT complex providing for pre – OT scrub up. Each fixture should be fabricated from heavy gauge type 304 stainless steel and should be seamless welded construction, polished to a satin finish.The washing faucet shall be made of Chrome plated brass hand. The station shall be equipped with soap dispensers made of SS 304 grade.The scrub sink should be provided with a front access panel which should be easily removed for access to the water controlled value, waste connections, stoppers and strainers.Hands free operation should include infra red sensors with built-in range of adjustment.The scrub station shall be made of high-grade stainless steel 304 with stain polish finish and wired to the current IEE regulations & BS 7971.Thermostatic mixing, valve control should be located behind the access panel and maintain constant water temperature. User defined setting of 1,3,6 & 10 min should be available. This timing should be adjustable to meet individual application requirements.All units should have reduced anti- splash fronts.The scrub stations control system shall be based on advanced microprocessorThe scrub station shall be sensor-activated 24VAC and should have the provision to operate it manually in case of power failure by using foot switch or knee switchimported thermostatic mixing valve for Hot & Cold water, Strainers, Spouts & manual foot operated valve system.Make- Jindal/Tata or Equivalent 169 AUTOMATIC PHASE SEQUENCE CONTROLLER 170 PMC Based (Pre magnetic Contractor)63A Double interlock & time Delay systemAuto/Manual Operation Sie- 140 x 275 x 320 mm Smooth and fasr Switchingworks well even at high & low voltages. Wide Current rnge.Voltage Range-130-280Vac Temperature- 55 Degree Celsius Auto mode Selector switchDigital micro Control relay for sequence management.LED Indicator for complete status of power.Make- Subtech or Equivalent 171 Operation Theatre Light - LED type, Camera Ready (Triple Arm) 172 Operating Room Surgical Lighting system should provde an ideal combination of broghtness, maneuverability, and shadow resolution without sacrificing color accuracy throuh a consistent LED technology. Such Lighting System should have the following technical specifications: 173 a. Number of light heads : Two per suspensionb. Colour Temperature range : 3800k-5000 (±10%) - Variable color temperature. c. Field Size Diameter : 20 to 28 cm (+/- 10%)d. Working range : 750 to 11100 mm (+/- 10 %)e. Illumination Level : 160000Lux (major Dome & Minor dome )f. Rotation : 360 - 330 degree g. Sterilizable Handle : 02 Nos h. Mounting type : Ceiling i. Supply Voltage : 230 VAC 50 Hz j. Bulb Type : LEDk. Dimming Range : 50% - 100%l. Operating / Storage Humidity : 10 - 95 %m. Life of Light source : > 40,000 Hrs n. Should be provision to mount the camera in 1 dome . o. Surgical Light System Should be compliant with relevant European CE / US FDA standardsMake- HillRom/Steris orEquivalent 174 GST Extra as applicable
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
35.
Educational and Research Institute #9426053 Technical Bid
Purchase Of Library Books , Subscription Renewal Of Ebsco-Host Database , Fundamentals Of Cyber Security/Mayank Bhushan Rajkumar Singh Rathore Aatif Jamshed/Bpb Publications , Cyber Safety For Everyone/Jaago Teens/Bpb Publications , Introduction To Engineering Mathematics Vol.Iv/H.K. Dass/S. Chand & Company Pvt. Ltd. , An Introduction To Rural Development Concept And Application : As Per Cbcs Course : Details As Images/Dr. Sourav Das/Global Net Publication , Technical Textiles/Gopalakrishnan D & P Vinayagamurthi/Daya Publishing House , Natural Fibers/J G Cook/Woodhead Publishing Series In Textiles , Industrial Chemical , Bio Processing Of Textiles/Vigneswaran C/Wood Head Publication , Text Book Of Fabric Science/Seema Shekri/Phi , The Complete Technology Book On Textile Spinning, Weaving, Finishing/Niir Board Of Consultants & Engineers/Niir Project Consultancy Services (Npcs) , Discovery Of India/Pt. Nehru/Penguin , Polypropylene Staple Fibres- Revealing Its True Potential/Dr. S. R. Vengsarker & Prof. S. D. Mahajan/Dkte , Introduction To Textile Manufacturing-I/Prof. A.N. Bhorkar/Shri Mangesh Prakashan Nagpur , Introduction To Textile Manufacturing-Ii/Prof. A.N. Bhorkar/Shri Mangesh Prakashan Nagpur , Textile Fibre Science/Prof. A.N. Bhorkar/Shri Mangesh Prakashan Nagpur , Mixing & Blow Room/Prof. A.N. Bhorkar/Shri Mangesh Prakashan Nagpur , Draw Frame And Comber/Prof. A.N. Bhorkar/Shri Mangesh Prakashan Nagpur , Carding/Prof. A.N. Bhorkar/Shri Mangesh Prakashan Nagpur , Roving, Ring Frame And Spinning Of Man Made Fibres/Prof. A.N. Bhorka/Shri Mangesh Prakashan Nagpur , Industrial Engineers Digest Learn, Practice And Improve Factory Performance (Paperback)/Prasanta Sarkar/Independently Published (By Online Clithing Study Www.Onlineclothingstudy. , Textile Calculation Fibre To Finished Garment/R. Chattopadhyay, Sujit Kumar Sinha,/Elsevier, Textile Institute Book Series , Fundamentals And Advances In Knitting Technology/S.C. Ray/Wpi , Applied Statistics And Probability For Engineers/Douglasc Montgomery, Geogre C. Runger/Wiley , Advanced Knitting Technology/S. Maity, S.Rana, K. Singha, P. Pandit/Elsevier, Textile Institute Book Series , Textile Engineering:Statistical Techniques Design Of Experiments And Stochastic Modeling/Bapi Saha, Ghosh P.Mal, Anindya/Crc Press , Advanced Optimization And Decision-Making Techniques In Textile Manufacturing/Ghosh, Mal K, Majumdar/Crc Press , Functional And Technical Textile/Maity, Singha Pandit /Elsevier , Textile Engineering: Statistical Techniques, Design Of Experiments And Stochastic Modeling/Ghosh A, Saha B., Mal P./Crc Press , Multidisciplinary Know-How For Smart-Textiles Developers/Kirstein, T./Wp , Computational Textile (Vol 55)/Zeng, X. Li, Y., Ruan D. & Koehl (Eds.) (2007) /Springer Science & Business Media , Handbook Of Smart Textiles/Tao, X. (Ed.) (2015)/Singapore Springer , Smart Textiles For Medicine And Healthcare: Materials, Systems And Application/Van Langenhove, L/Woodhead Publishing Series In Textiles , Nanosensors And Nanodevices For Smart Multifunctional Textile/Ehrmann, A. Nguyen, T.A. & Tri., P.N.(Eds. )(2020)/Elsevier , Ink Jet Textile Printing/Christina Cie/Woodhead Publishing Limited, 2015 , Aatcc Technical Manual, Vol.85/Aatcc/ American Association Of Textile Chemists And Colorists,Latest Version , Environmental Chemistry/A K De/New Age International P Ltd, New Delhi, 2006 , Advances In Textile Biotechnology/V.A. Nierstrasz And A. Cavaco-Paulo/Elsevier , Dyeing – Processes, Techniques And Applications/Jie Fu/Nova Science Publishers Inc., New York, Usa , Sustainability In Textile Chemical Processing/Dr. Javed N. Sheikh, Dr. M.D.Teli/Woodhead Publishing, India (2022) , Synthetic Dyes/G R Chatwal/Himalaya Publishing House. New Delhi, India. , An Introduction To Textile Coloration/Roger H Wardman/Sdc Publication Uk , Textile Management Guideline For Technicians/Arvind Kumar Upadhyay/Wpi , Hand Book For Weaving Expert/Dr. Ifran Ahmed Shaikh/Heritage Publishers , Hand Book For Testing And Quality Expert/Dr. Ifran Ahmed Shaikh/Heritage Publishers , Hand Book Textile Expert/Dr. Ifran Ahmed Shaikh/Heritage Publishers , Hand Book Dyeing Printing Finishing Expert/Dr. Ifran Ahmed Shaikh/Heritage Publishers , Hand Book Textile Q & A/Dr. Ifran Ahmed Shaikh/Heritage Publishers , Testing Of Textile And Firous Materials/Apurba Das/Crc Press , A Concise Guide Of Scientific Writing And Communication/Dr. Kalpana Singh/Iip Publishers , Operation Research/V.K. Kapoor/Sultan Chandra & Sons. , Organisational Behaviour/Stephen P.Robbins/Tata Mcgraw Hills , Dyeing Of Textile Subratres Ii Fibres Other Than Cotton And Blends 2021 Edition/K. Mathews/Wood Head Publication , Dyeing Of Textile Substrates Iii Fibres Yarn And Knitted Fabrics/Mathews Kolanjikombil/Wood Head Publication , Textile Engineering 1St Edition 2021 Softbound/Anindya Ghosh, Bapi Shah/Crc Press , An Introduction To Textile Coloration : Principles/Roger H Wardman/John Wiley , Advances In Treating Textile Effluent 2017/Hauser Pj/Intech , Natural Dyes/Kumbasar Epa/Intech , Eco-Friendly Textile Dyeing And Finishing/Jamshed A Khan/Scitus Academics , The Fundamentals Of Quality Assurance In The Textile Industry/Stanley Bernard Brahams/Taylor And Francis , A Book On Vegetable Dyes/Ethel M. Mairet/Lulu.Com , Managing Quality In The Apparel Industry/Pradip V. Mehta, Satish K. Bhardwaj/New Age International (P) Ltd , Textile Sizing/Goswami A/Taylor & Francis Ltd , Bicomponent Fibres/Jeffries R/Woodhead Publishing , Textile Wastewater Treatment/Akcakoca Ep/Intech
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
36.
Defence #9416178 AOC
Tender For Provision Of Oh Tanks Ug Sumps And External Services For Map Ph-Ii Under Ge S Pune And Ge N Pune.; 1 SCH A PART-I TO VII:Note: These schedules are pre-priced by MES and the rate indicated as Rs 0.00 under Col 6 signifies this fact only 2 Total amount of Sch ‘A’ Part I (Building & Structure) 3 Total amount of Sch ‘A’ Part II (Internal Water supply) 4 Total amount of Sch ‘A’ Part III (Internal Electric Supply) 5 Total amount of Sch A Part-IV (Sewage Disposal) 6 Total amount of Sch A Part-V (External Water Supply) 7 Total amount of Sch A Part-VI (External Electric Supply) 8 Total amount of Sch A Part-VII ( LIGHTNING PROTECTION ) 9 Total amount of Sch A Part-VIII (Excavation and Earthwork) 10 SCHEDULE A PART-IX (MISC B/R ANDE/M WORKS)Note: This schedule is not pre-priced by MES and the rate indicated as Rs 0.00 under Col 6 signifies this fact only. 11 MISC ITEMS E/M WORKS OF INTERNAL & EXTERNALELECTRICAL SUPPLY 12 S&FLEDstreet light luminaire 25 W with pressure die castaluminium housing LED street light luminaries with IP66 with 25 W high power LED, maintenance free system and connecting up with cable, including 1.5 m long GI bracket of required dia, bent to shape, clamp and nut bolts of suitabler size complete all as specified and all as directed. 13 S&F solar powered aviation obstructionlamp complete sysytem make: Altos model AOL-Q-3 SP or equivalent model in philips / Crompton Greaves / bajaj consisting of : (a)LED based avitation obstruction lamp fitting (b) solar panel (c)Battery unit (d) Mounting structure for all above with inter connecting wiring complete all as specified and ditected. 14 Testing and commissioningtransformer copper wound step down, out door type, complete with all standard fitting of capacity 100 KVA, AC 3 phase, 3 wire primary, 4 wire secondary, 50 C/S type HT-22 KV, 3 PH, LT-433 Vand making compete connection of HT and LT Sidewith glands, lugs complete all as specified and directed.(Note- Transformer already installed /mounted on platform at site , before commisioning contractor will carried out Acidity Test,Sludge test, Insulation resistance Test,Break down voltage test of Oil.If test result not meet as per IS standard,contractor will carried out servicing of transformer at site In case of Sphare is out of order andreplacement requiredSphare part of transformer paid sapareatluy under relevent Item. 15 All as per item No- 11.003above but capacity22 KV 200 KVA. 16 Installation, testing and commissioningtransformer copper wound step down, out door type, complete with all standard fitting of capacity 300 KVA, AC 3 phase, 3 wire primary, 4 wire secondary, 50 C/S type HT-22 KV,LT-433 V and making connection on HT & LT side with gland and lugs , The transformer will mount on platform as per manufacturer instruction 0r Typical drawing or of size of size 2.00 M x 2.00 M x 3.50 M deep (1.00 m below GL) withPCC (1:3:6) type C2 and15 cm thick RCC (1:2:4) type B1 for top, reinforced with 10 mm dia TMT bars @ 150 mm C/C complete including excavation & earthwork in any type of strata viz soft/loose/hard/dense/Rock, frame work all as specified and directed(Note- Transformer shall be issued under Sch B free for fixing , before commisioning contractor will carried out Acidity Test,Sludge test, Insulation resistance Test,Break down voltage test of Oil.If test result not meet as per IS standard,contractor will carried out servicing of transformer at site In case of Sphare is out of order andreplacement requiredSphare part of transformer paid sapareatluy under relevent Item.The rate quoted by the contractor shall deemed to be included the cost offoundationa and transportation of transformer from MES yard to work site.No extra payment shall be made on this account.) 17 All as per item No- 11.005above but capacity 11 KV100 KVA. 18 All as per item No- 11.005 above but capacity 22 KV 400 KVA. 19 Servicing of existing LT electrical distribution/control panel of any size and capacity including cleaning of dust and debris, tightening of all connections, checking of contactors/relays, testing of insulation resistance, repair/replacement of defective control wiring (upto 1.5 sqmm copper) and faulty indicators (LED type), Testing and replacement of defective control MCBs upto 63A andensuring full operational status. Complete in all respects as per standard practice and directed by engineer-in-charge 20 Supply, jointing and testing outdoor cable end termination joint (heat shrinkable) suitable for 3 core 185 sqmm 22 KV XLPE cable suitable for earth system complete all as specified and directed. 21 Supply & fix heat shrinkable straight through joint 22 KV XLPE cable suitable for earth system of size 185 sqmm 3 core complete all as specified and directed. 22 M&L Earthing with 600x600x6mm galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge or the plate at a depth of not less than 1.5 m below ground level, connected to and including galvanised eath strip 32 mm x 6 mm by means of bolts,nuts and check nuts and washers of galvanised steel. Gl pipe 40 mm dia light grade pipe for protection of G.l. earth strip both to be provided to the extent of 7.5 meters as earthing lead and connecting to the eqpt/machinery etc. incl charcoal dust and common salt packed all around the earth plate in alternate layer in the earth pit all as per elctrical plate No. 3 of SSR Part 1·2009 including PCC chamber made up of PCC 1:3 :6 type C1 & RCC Chamer cover of size 540x540x100 mm made with 1:2:4 Type B1 using 6 mm round MS bar & 8 mm MS bar for handle , 20 mm dia medium grade G.I. Watering pipe from top edge of the earth plate upto M.S funnel with wire mesh provided inside the concrete earth pit for watering arrangement including excavation and earth work in any type of soil and testing complete all as specified and directed. 23 Installation testing and commissioning of OUTDOOR TYPE ENCLOSURE, Double door, with angle iron pedastal frame & including steel structure required for installation on cable trench housing cubicle Type, free standing Panel CPRI approved working on 440 V 3 phase 50 Hz, AC supply with aluminium bus bar suitable for 800 Amps fully compartmentalized, dust-proof and vermin proof, 3.15 mm thick CRCA sheet steel enclosure painted asper the 7-tank process & suitable for IP-56 protection, as per section and having the following details and as shown in single line diagrams GE/1668/901:(a) Volt meter 0 – 500 Volt with selector switch – 01 (b) Ammeter 0.1000 Amps with CTs and selector switch – 01. (c) Indication Lamp assembly – RYB LED – 01 set.Incomer : 630 A 4 pole, ACB-02 Nos. Bus coupler : 630 A 4 Pole, ACB -01 No. Outgoing feeders :3 Pole, 315 A MCCB, 50 KA -05 Nos, 4 Pole, 250 A MCCB,35 KA-03, 3 Pole, 200 A MCCB, 35 KA -02Nos, 4 Pole, 100 A MCCB, 25 KA-01 Nos. Panel fabrication & Bus bar for above feeders. (Note- LT Panel with components as above shall be issued under Sch B free for fixing ) 24 Installation, testing & commissioning of OUTDOOR TYPE ENCLOSURE, Double door, with angle iron pedastal frame & including steel structure required for installationon cable trench housing cubicle type, free standing, panel CPRI approved 3 phase, 50 Hz, AC supply with aluminium bus bars, fully compartmentalized, dust-proof and vermin proof, 3.15 mm thick CRCA sheet steel enclosure painted as per the 7-tank process & suitable for IP-56 protection, as per specifications and having the following details and as shown in single line diagrams GE/1968/901 : (Note- LT Panel with components as above shall be issued under Sch B free for fixing )Incomer:160A, 4 pole 25 KA, MCCB with S/C adjustable, O/L & E/F thermal magnetic releases - 01 eachOutgoing Feeders:160A, TP, 25 KA, 415 VoltMCCB withS/C & adj. O/L& E/F thermal magnetic releases - 05 Nos25 KVAR APFC Compartment80A, TPN, 25KA - 1 No, MCCB with fixed neutral and S/C & adj. O/L thermal magnetic release 01 Each8 Stage APFC Relay16A, TPN, 25KA, MCCB with fixed neutral and S/C & adj. O/L thermal magnetic releases (for 5 KVAR Capacitor) 01 Each32A, TP, 25KA, MCCB with fixed neutral and S/C & adj. O/L thermal magnetic releases (for 10 KVAR Capacitor) - 02 NosCapacitor MD - XL 25 Installation testing and commissioning diesel engine/driven generating set of capacity 30 KVA (24 KW) 415 volts 0.8 power tractor at NTP, mounted on base platform with flexible coupling, 1500 RPM alongwith sound proof enclosure (Acoustic Enclosure) designed for reducing the sound level to 7+5 to B(A) (average) IS8528 part - 10 as per approved CPCB norms and as per GSR 371 (E) dated 17.05.2002 with silencer pipe and silencer muffler covered with asbestos rope 25 mm thick independently supported from engine to outside of power house upto 1 mtr, cold start kit, battery start with suitable size of standard dabbles for connecting from DG Set to panel board DG set shall be capable with and including the following:(A) PRIME MOVER: Diesel engine of suitable capacity water cooled (Radiator mounted) closed circuit as per BS-649 or IS-1002 direct injection type with turbo charger. Make: Cummins India Ltd/Kirloskar. The diesel engine shall be capable of running 24 hour continuously with 10% over loading for one hour in every 12 house as per BS 5514/- BS 649/- Engine shall be equipped with all standard fittings as per manufactures recommendations mounted on common base plate/form through flexible coupling with following accessories :(Note- DG Setwith components as above shall be issued under Sch B free for fixing ) (a) RPM cum hour meter(b) Battery Charging Ammeter(c) Ignition key and starting with push buttons(d) Lubricating oil pressure gauge(e) Electronic governor controlling 26 (f) Toggles switch for idle running(g) Oil Tem gauge (h) Water temp gauge(j) Safety control (Trip)(i) High water temperature(ii) Low Lubricant oil pressure(iii) Over speed(k) 24 hours starting equipment comprising with the following:(i) 1 No. 12 volt 180 AH batteries, Make: Exide type 25xnN21 or equivalent as recommended by manufacturer.(ii) Battery charging alternator with built in regulator.(iii) Starter motor assy of suitable capacity.(iv) Battery leads (copper stranded cable) of suitable size with brass thimbles and erminal Make of engine : Kirloskar/Cummings(B) ALTERNATOR: Alternator of capacity 30 KVA/24 KW at NTP, 415 volts, 50 C/S, 1500 RPM, 0.8 power factor, self excited, self regulated, screen protected with self excited field brush rotating fixed designed to be coupled with above engine through flexible coupling. the alternator shall be conformed to 4722 of BS-2613 MAKE: Kirloskar C) CONTROL PANEL : Alternator control panel floor mounted, cubical type with internal wiring with copper conductor for 30 KVA, 415 volts, 3 Phase 4 wire, 50 cycle alternator fabricated out of MS Sheet painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer equipped with the following accessories: 27 (i) AC voltmeter with selector switch 0-500V 01 No.(ii) Ammeter with CT and selector switch of suitable range 01 No(iii) Frequency meter - 01 No.(iv) KW and KWH meter - 01 No.(v) Power factor meter - 01 No(vi) MCCB (for incoming) as recommended by manufacturer - 01 No(vii) Set of copper bus bar of suitable size 01 No.(viii) Set of indicating lamps for 3 phase (RYB) 01 No(ix) Oil Pressure gauge 01 No(D) OTHER FITTINGS: (i) Battery Charger : Battery charger having electric circuit consisting of rectifiers, capacitors and resistance etc. The battery charger should be able to charge 12 volts 180 AH battery 2 Nos at a time(ii) Fuel tank of suitable capacity as per manufacturer recommendation mounted on steel frame at suitable height with all connecting pipes and fittings upto fuel pump and over flow pipe from engine to tank including level indicating gauge duly marked and drain valve and air vent plug etc. (E) Maintenance Spares:(i) Fuel filter element - 02 Nos(ii) Oil filter elements - 03 Nos(iii) Fan Belt - 01 Set(iv) Hose pipe - 01 Set(v) Tappet over gasket - 01 No(F) DG set shall be supplied along with acoustic original enclosure of the manufacture’s suitable for 30 KVA DG Set per CPCB Norms 28 Installation testing and Commissioning of INDOOR TYPE ENCLOSURE with angle iron pedestal frame & including steel structure required for installation on cable trench housing cubicle type, free standing, panel CPRI Approved working on 440 V, 3 Phase50 Hz, AC supply with aluminium bus bars, fully compartmentalized, dust-proof and vermin proof, 2 mm thick CRCA sheet steel enclosure painted as per the 7-tank process & suitable for IP-56 protection, as per section and having the following details and as shown in single line diagrams Ge/1968/905 (Note- LT Panel with components as above shall be issued under Sch B free for fixing )INCOMERFP pole MCCB 250 Amps 35 KA – 02 NosOut Going feeders:TPN pole 16A MCCB, 25 KA – 02 NosTPN pole 20A MCCB, 25 KA – 02 NosTPN pole 63A MCCB, 25 KA – 02 NosTPN pole 100A MCCB, 25 KA – 02 NosTPN pole 125A MCCB, 30 KA – 02 Nos3 KVAR capacitor duty contractor – 02 Nos5 KVAR capacitor duty contractor -02 Nos20 KVAR capacitor duty contractor -02 Nos30 KVAR capacitor duty contractor -02 Nos40 KVAR capacitor duty contractor -02 Nos8 stage APFC relay – 02Nos 29 Installation testing and commissioning diesel engine/driven generating set of capacity 160 KVA (128 KW) 415 volts 0.8 power tractor at NTP, mounted on base platform with flexible coupling, 1500 RPM alongwith sound proof enclosure (Acoustic Enclosure) designed for reducing the sound level to 7+5 to B(A) (average) IS8528 part - 10 as per approved CPCB norms and as per GSR 371 (E) dated 17.05.2002 with silencer pipe and silencer muffler covered with asbestos rope 25 mm thick independently supported from engine to outside of power house upto 1 mtr, cold start kit, battery start with suitable size of standard dabbles for connecting from DG Set to panel board DG set shall be capable with and including the following:(A) PRIME MOVER: Diesel engine of suitable capacity water cooled (Radiator mounted) closed circuit as per BS-649 or IS-1002 direct injection type with turbo charger. Make: Cummins India Ltd/Kirloskar. The diesel engine shall be capable of running 24 hour continuously with 10% over loading for one hour in every 12 house as per BS 5514/- BS 649/- Engine shall be equipped with all standard fittings as per manufactures recommendations mounted on common base plate/form through flexible coupling with following accessories : (Note- DG Set with components as above shall be issued under Sch B free for fixing ) complete all as specified and directed.(a) RPM cum hour meter(b) Battery Charging Ammeter(c) Ignition key and starting with push buttons(d) Lubricating oil pressure gauge(e) Electronic governor controlling(f) Toggles switch for idle running 30 (g) Oil Tem gauge (h) Water temp gauge(j) Safety control (Trip)(i) High water temperature(ii) Low Lubricant oil pressure(iii) Over speed(k) 24 hours starting equipment comprising with the following:(i) 1 No. 12 volt 180 AH batteries, Make: Exide type 25xnN21 or equivalent as recommended by manufacturer.(ii) Battery charging alternator with built in regulator.(iii) Starter motor assy of suitable capacity.(iv) Battery leads (copper stranded cable) of suitable size with brass thimbles and erminal Make of engine : Kirloskar/Cummings(B) ALTERNATOR: Alternator of capacity 160 KVA/128 KW at NTP, 415 volts, 50 C/S, 1500 RPM, 0.8 power factor, self excited, self regulated, screen protected with self excited field brush rotating fixed designed to be coupled with above engine through flexible coupling. the alternator shall be conformed to 4722 of BS-2613 C) CONTROL PANEL : Alternator control panel floor mounted, cubical type with internal wiring with copper conductor for 160 KVA, 415 volts, 3 Phase 4 wire, 50 cycle alternator fabricated out of MS Sheet painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer equipped with the following accessories: 31 (i) AC voltmeter with selector switch 0-500V 01 No.(ii) Ammeter with CT and selector switch of suitable range 01 No(iii) Frequency meter - 01 No.(iv) KW and KWH meter - 01 No.(v) Power factor meter - 01 No(vi) MCCB (for incoming) as recommended by manufacturer - 01 No(vii) Set of copper bus bar of suitable size 01 No.(viii) Set of indicating lamps for 3 phase (RYB) 01 No(ix) Oil Pressure gauge 01 No(D) OTHER FITTINGS:(i) Battery Charger : Battery charger having electric circuit consisting of rectifiers, capacitors and resistance etc. The battery charger should be able to charge 12 volts 180 AH battery 2 Nos at a time(ii) Fuel tank of suitable capacity as per manufacturer recommendation mounted on steel frame at suitable height with all connecting pipes and fittings upto fuel pump and over flow pipe from engine to tank including level indicating gauge duly marked and drain valve and air vent plug etc.(E) Maintenance Spares:(i) Fuel filter element - 02 Nos(ii) Oil filter elements - 03 Nos(iii) Fan Belt - 01 Set(iv) Hose pipe - 01 Set(v) Tappet over gasket - 01 No(F) DG set shall be supplied along with acoustic original enclosure of the manufacture’s suitable for 160 KVA DG Set per CPCB Norms 32 Installationtesting & commissioning of indoor cubic type, free standing floor mounted including of steel structure required for installation on cable trench with base frame, AMF panel CPRI approved on 440 V 3 phase 50 HZ, AC supply. It shall be extendible at both ends, with aluminium bus bars 200 amps capacity fully compartmentalized dust-proof and vermin proof, 2 mm thick CRCA sheet steel enclosure painted as per the 7-tank procress & suitable for IP-52 protection, as per section and having the following details and as shown in single line diagrams GE/1968/094 , complete all as specified and directed.( Note - AMF panel with components shall be issued under Sch B free for fixing ).Incomer100A 4 pole, 25 KA motorized MCCB – 01 NoOutgoingTPN 63 A MCCB, 25 KA – 02 NoTPN 32 A MCCB, 25 KA, 32 A MCCB, 25 KA – 2 NoPanel Fabrication & Busbar for above feeder 33 Installationtesting & commissioningof cubic type, free standing floor mounted weather proof type, pedestal mounted feeder pillar working on 440 V 3 phase 50 Hz, AC supply., It shall be with alum.bus bar 300 amps capacity weather proof dust proof with canopy on top 3.15 mm thick CRCA sheet steel enclosure, painted as per the 7-tank process and painted for outdoor weather proof IP-55 protection installation, as per specification and having the following details and as shown in single line diagrams GE/1968/903 complete all as specified and directed.(Note- LT Panel with components as above shall be issued under Sch B free for fixing )IncomerFP 315 A MCCB,50 KA- 01 NoOutgoingTPN 63A MCCB, 25 KA – 08 NosPanel Fabrication & Busbar for above feeder 34 Installationtesting & commissioningof cubic type, free standing floor mounted weather proof type, pedestal mounted feeder pillar working on 440 V 3 phase 50 Hz, AC supply., It shall be with alum.bus bar 300 amps capacity weather proof dust proof with canopy on top 3.15 mm thick CRCA sheet steel enclosure, painted as per the 7-tank process and painted for outdoor weather proof IP-55 protection installation, as per specification and having the following details and as shown in single line diagrams GE/1968/903 complete all as specified and directed.(Note- LT Panel with components as above shall be issued under Sch B free for fixing )IncomerFP 250 A MCCB,35 KA- 01 NoOutgoingTPN 63A MCCB, 35 KA – 08 NosPanel Fabrication & Busbar for above feeder 35 Supply, Install, testing, and commissioning of outdoor type, enclosure double door with angle iron pedestal frame & including steel structure required for installation on cable trenches, housing cubical type free standing,panel working on 440 volts, 3 phase 50 hz, AC supply with aluminium bus bar,full compartmentalised dust proof and vermin proof 3.15 thcik CRCA sheets steel enclosure, painted as per the 7-tank process & suitable as per IP-56 protection as per specification and having the following details and as shown in single line diagrams GE/1968/901 (Panel for 3 Alexander Road) complete all as specified and directed.a)MCCB 160 amps 4 pole, 25 KAbreaking capacity with short circuit adjustable overload& earth fault thermal magnetic release-8 Nos, CTs, ammeter with selector switch, voltmeterwith selector switch(Incomer)-01 Nos Bus bars: 250 A TPN aluminium Busbars suitable for 25kA for 1 Sec Outgoing Feeders :a) MCB TP 40 Amps 25 KA breaking capacity with short circuit adj overload and B/F thermal magnetic releaseb) Suitable enclose IE panel fabrication and bus bars for above MCB feeders. c) Angle iron base frame as reqd size as per above panel, total leg height 600 mm and grouting in side PCC 150 mm legsand made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No.d) M & L for necessary grouting as reqd PCC 1:3:6 (40 mm graded aggregate) Type C2 for foundation of angle iron legs frame work complete - 01 job 36 Supply, installation, testing and commissioning of readymade 08 way TPN DB metal doorwith 200A rated busbar with following (CAT Part NoDBTPN008DDS of L& T or equivalent in Siemens/Legrand/C&S)Incomer: (a) MCB 4 Pole 60 Amps, 415 Volts breaking capacity 10kA 02 Nos (BB30630C of L &T)Outgoing feeders:(a) MCB TP 25 Amps, 415 Volts breaking capacity 10kA 04 Nos (BB30250C of L &T)(b)MCB SP 10 Amps, 230 Volts breaking capacity 10KA 04 Nos (BB10100C of L &T) 37 Supply, installation, testing and commissioning of outdoor line up of 11 KV RMU type compact panels, consisting of following :-11 KV 630 Amps 20KA for 3 sec. air/gas insulated RMU panel with 1 No incommingmanullay operated VCB and 02 Nos outgoing load break switches,CTs for protection as per detils given in specification complete in all respect inverse time over, current, short circuit & earth fault with instantaneous elements relay.Indication : ON, Off, Trip, R.Y.B. with facility for transformer buchholz relay trip with terminals for 230V AC supply aluminium Busbars 630 Amps, 11KV, TP busbars for 20 KA for 1 sec with PCC foundation all as per required & as per manufacturer instructions. complete all as specified and directed. 38 Supply, installation, testing and commissioning of 11KV 50/5 Amps ratio oil immersed vacume impragnated single phase current transformer with VA burden of 15 for class 0.5 class SP 10 with 25 KA short circuit rating for 1 second complete with all structure base and mounting arrangement as indicated and also as per specification and technical particulars. 39 Supply,Installation , testing and commissioning of outdoor line-up of 22 KV RMU type compact panels, consisting of : 22 KV 630A, 20KA for3 sec Air/Gas insulated RMU panel with 1 No Incomer & 2 Nos outgoing: 22 kV, 16 kA for 1 second, 630A HT VCB with 3 nos. resin cast 22000V/ sqrt. 3/ 110V/ sqrt. 3 withdraw-able PTs, HT and LT fuses ffor PTs, In comer 3 nos 50/1A & in outgoing 9 Nos. 20/1A CTs-core-1: class 0.5 CTs for metering, Core 2 : class 5 P10 for protection, inverse time over current, short circuit & each fault with intantenous elements relay, master trip, R.Y.B spring charge, trip circuit healthy. ON-OFF Push buttons illumination lamp, hooter, industrial socket with switch, space heater with thermostat, control MCB & control terminals etc complete all as specified and directed. 40 Laying only in trenches or fixing on wall or pole LT XLPE UG cable insulated screened PVC beded GI steel strip or wire armoured electric power cable (Heavy duty) with standard aluminium conductor 1100 volt grade of the follwing size including provision of necessyar lugs and glands as under : (Note- LT under ground cablementioned below at sl No (a) to (i) shall be issued under Sch Bfor laying/fixing ) 41 a) 300 sqmm 3.5 core 42 b) 240 Sqmm 3.5 core 43 c) 185 sqmm 3.5 core 44 d) 150 Sqmm 3.5 core 45 e) 120 Sqmm 3.5 Core 46 f) 50 Sqmm 3.5 Core 47 g) 35 Sqmm 3.5 core 48 h) 25 Sqmm 4 core 49 i)16 Sqmm 4 core 50 Supply and fixing and installation of fire extinguisher CO2 Map cap of 4.5 Kg as per IS 2878 Complete all as specified andas directed. 51 MS fire bucket 13 Ltr Cap of fire approved quality painted red filled with sand Complete all as specified andas directed. 52 Supply only hand gloves for safety,suitable for 22 KV grade. Complete all as specified andas directed. 53 Supply only hand gloves for safety,suitable for 11 KV grade. Complete all as specified andas directed. 54 MS padestal stand duly painted for suspending fire buckets 55 M&Lfor shock treatment chart in different languages (english, Hindi, Marathi) 56 Supply and placing of first aid box as per specification 57 Cable route marker made of galvanised iron supporting with GI angle for HT/LT cable root marking 58 M&L for Road cuttingby core cutting machine not less than 0.6 mtr wide and .45 mtr depthfor laying RCC and GI Pipe for the the HT/LT cable and making good surface with PCC 1:4:8 type D-2 using 40 mm graded stone aggergatecomplete all as specified and directed. 59 Supply and erect steel tubular poles swaged welded poles complete for two pole structure with MS base plate, MS pole cap, bolts nuts, and screws as per IS 2723 ( part II ) 1980 made out MS tyubing duly painted with metal primer and two coats of aluminium paint over exposed surface and Making 4 Nos of strips of 30 cm wide in alternate black and yellow colourup to 1.5 mtr hight, Writing pole number and voltage level encompassed by circle of suitable diausing two coats of synthetic enamel paint over a coat of red oxide zinc chrome primerbottomand one coat of red oxide and two coats of bituminous paint for embedded portion as specified type 410 SP - 31 of 9 mtrs long complete all as specified and as directed. ( Note- Excavation / earth work , PCC will be measured and paid separately ) 60 S&F FRP box,MCB SP 6 Amp-01 No and clamps made out of FI 32x6mm and GI nut bolts. Complete all as specified andas directed. make-syntex Model GSJB-3020 with 4 connectors or eqvt 61 S&Ftimer switch box fabricatedout of 16 SWG CRCA sheet with mounting arrangement duly powder coated consisting of the following :-a) Timmer astronomical-1, b) Power contactor 63 Amps make- -01 Noc) connector 100 Amps 230 Volts - 03 Nosd) MCB TPN 63 Amps 415 V - 01 Noe) Control fuse 2 Amps -01 NoComplete all as specified andas directed. 62 S&F pin type polymer/porcelain, vitreous, white, brown or green insulator including one galvanized mild steel spindle, two galvanized iron washer and one galvanized iron nut 150 mm height, 150 mm dia for suitable for 22 KV working pressure. Complete all as specified andas directed. 63 S&F Disc type porcelain, vitreous, white, brown or green i nsulator includingone galvanized mild steel spindle, two galvanized iron washer and one galvanized iron nut 145 mm height, 255 mm dia ball and socket type Two-in-assembly for tension with tension clamps for conductor suitable for 22 KV working pressure. Complete all as specified andas directed. 64 Supply and lay rubber mat 2 mtr x 1 mtr,10mm thick 11 KV grade AC elect supply. Complete all as specified andas directed. 65 Supply and lay rubber mat 2mtr x 1 mtr,30mm thick 22 KV grade AC elect supply. Complete all as specified andas directed. 66 Supply and lay rubber mat 2mtr x 1 mtr, 19mm thick 11 KV grade AC elect supply. Complete all as specified andas directed. 67 Supply, jointing and testing Outdoor type cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sqmm. Complete all as specified andas directed. 68 Supply, jointing and testing Outdoor type cable jointing kit for 22 KV (Earthed) grade cable for outdoor termination heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sqmm. Complete all as specified andas directed. 69 Supply, jointing and testing indoor typeCable jointing kit for 11 KV (Earthed)grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size ofsize 150 sqmm 70 M & L for discharge rod PVC coated suitable for 22KV. With PVC insulated copper conductor cable of size 7/20 of 10mtr long with crocodile clips at the end. Complete all as specified andas directed. 71 M & L for discharge rod PVC coated suitable for 11KV. With PVC insulated copper conductor cable of size 7/20 of 10mtr long with crocodile clips at the end. Complete all as specified andas directed. 72 Supply onlyEngine oil, multi grade premium Genuine oil 15W40 as per manufacturer recommendations in DG sets complete all as specified.Make : Indian oil/ Hindustan Petrolium/ Castrol/ BPCL. 73 Supply and applying for petrolium Jelly (01 Kg plastic sealed container) complete all as specified and as directed. Make : Indian oil/ Hindustan Petrolium/ Castrol/ BPCL. 74 Supply and fill for genuine coolant in 5 litres plastic sealed containerfor topping up in Radiator of DG set located at different locations complete all as specified and as directed. 75 Material and labour for battery leads of PVC insulated, multistranded, copper conductor of size 50 Sqmm of 1.25 metres long each duly fixed with brass clamps, copper lugs suitable for DG set batteries installed at different locations including removal of existing unserviceable one complete all as specified and as directed. 76 Material and labour for battery teriminal brass clamps including removal of existing unserviceable one compete all as specified and as directed. 77 Maintenance and servicing for Comprehensive C Check maintenance service for DG Set of capacity 160 KVAincluding dismantling, cleaning, filter & oil replacement, fuel system overhauling, radiator inspection, valve clearance adjustment, load testing, FIP Caliberation, checking and repair of radiator for leakage,and detailed service report submission as per OEM recommendation to DG setincluding replacement of defective and worn out minor filters gaskets, V- belts, Engine oil, rubber hoses, worm drive clamps, nuts, bolts and cleaning of alternator with vaccum cleaner and attending faults of AMF panels etc, tappet settings if required and greasing of bearings of engine and alternator, checking of batteries, applying petroleum jelly to battery terminals, adding distilled water checking the oil, coolent levels of capacity 100 KVA DG set installed at Southern Command Signal Centrecomplete all as directed by Engr- in- Charge.Note:- (i)Spares required for maintenance will be measured and paid seprately under relevant items. (ii) Servicing to be carried out as per manufacturer’s specifications/ instructions (iii)The work of maintenance shall be carried out through respective authorized dealer whose certificate shall be produced to Engineer - in - charge (iv) Proper record & test results of the same shall be maintained as directed (v)Work shall be carried out at site at different location Work to be carried out by OEM certified technician or approved equivalent. Service reports to be submitted post-maintenance 78 All as per item no. 11.066here-in-above but of capacity 100 KVA. 79 All as per item no. 11.066here-in-above but of capacity 30 KVA. 80 S & FLub oil filter set with O ring, (as perexisting sample) suitable for DG set of capacity 160 KVA. compete all as specified and as directed. 81 S & FLub oil filter set with O ring, (as perexisting sample) suitable for DG set of capacity 100 KVA. compete all as specified and as directed. 82 S & FLub oil filter set with O ring, (as perexisting sample) suitable for DG set of capacity 30 KVA compete all as specified and as directed. 83 S & F diesel filter element set with O ring,suitable forcapacities ofD. G . Set 160 KVA compete all as specified and as directed. 84 S & F diesel filter element set with O ring,suitable forcapacities ofD. G . Set 100 KVA compete all as specified and as directed. 85 S & F diesel filter element set with O ring,suitable forcapacities ofD. G . Set 30 KVA compete all as specified and as directed. 86 S & F air filter element suitable for capacities ofD. G . Set 160 KVAcompete all as specified and as directed. 87 S & F air filter element suitable for capacities ofD. G . Set 100 KVAcompete all as specified and as directed. 88 S & Fair filter element suitable for capacities ofD. G . Set 30 KVAcompete all as specified and as directed. 89 S & F by-pass filter element with O ring suitable for 160KVA DG set compete all as specified and as directed. 90 S & F by-pass filter element with O ring suitable for 100KVA DG set compete all as specified and as directed. 91 S & F by-pass filter element with O ring suitable for 30KVA DG set compete all as specified and as directed. 92 S & Ffan beltcomplete suitable for 100KVA DG set complete all as specified. Make : Fenner/ Dunlop. 93 S & F belt for battery charging alternator complete suitable for 100KVA DG set complete all as specified. Make : Fenner/ Dunlop. 94 S & F rubber hose pipe set for water circuit with clamps complete suitable for 100KVA DG set complete all as specified. 95 M & L for carrying out repairs to AMF panel of 100 KVA DG set at various installation inclduing study, tracing out circuit, testing, replacing all defective parts, rewinding existing power and control wiring with same cables including testing and commissioning complete all as specified and as directed. (Note: Spares like Volt meter, CT, power contactor required for repair will be measuredand paid seperately under relevant items. 96 S & Ffor digital type frequency meter 96 x 96 mm flush/ square pattern compete all as specified. Make: L&T/ AE or equivalent. 97 S & Ffor digital type Ammeter 0-200 /5 Amps 96 x 96 mm square flush pattern with selector switch compete all as specified. Make: L&T/ AE or equivalent 98 S & Ffor digital type Voltmeter 0-500 Volts 96 x 96 mm square flush pattern with selector switch compete all as specified. Make: L&T/ AE or equivalent. 99 S & F for LED indicator lamps R, Y, B with holder 15 mm screw type compete all as specified. Make: Rishab/ L&T/AE/ Legrand or equivalent 100 S & F for battery low maintenance lead acid of capacity 12 volts 135 AH with initial charging including removal of exsting unserviceable one and hand over to store yard compete all as specified and as directed. Make: Exide/ AMCO/ Amaron. 101 S & F for CT cast resin type of ratio 200/5 Amps of suitable VA burden compete all as specified. Make: AE/ L&T/ Nutech/ Amol 102 Supply and fix for lead acid battery 12 Volts 180 AH with initial charging and having indicators to know the status of level of electrolyte complete all as specified and as directedMake- Exide/Amaron. 103 Supply &filling up of transformer oil conforming to IS -335 of 1993 as in topping up / replacementup to desired level of transformer oil capacity and Oil circuit brekar complete all as specified and as directed. [Note: Dielectric strength of oil should not be less than 42 KV/cm complete all as specified and directed.] 104 Supply only breather assembly as per existing size, shape and specification complete for capacity 315 KVA , 11/0.433 Voltstransformers including fresh blue silica gel 105 Painting of transformer after cleaning the body surface of transformer by rubbing with emery Paper to remove oil stains, dust etc and applying one coat of snthetic enamel paintby spray paint incl writing SM No/MES No , capacity of transformer of 315KVA capacity all as directed by Engr-in-Charge 106 Supply and fix for switch air break gang operated HT 11 KV Volt grade out door type, triple poleof capacity 200 amps rating mounted on Polymer based 09 insulator with expulsion fuse set single pole drop out type including Expulsion fuse carriers and fuse element Upto 25 Amp and fitted on steel frame horizontally mechanicallyoperated mechanism from ground level consisting of operating rod of 25 mm bore Heavy grade GI pipe of suitable length worked from ground level and with locking arrangements incl pad locks with key flat iron clamp 50 mm x 6 mm including taking down old unseviceable one complete all as specified and directed. (Universal/Pactil) 107 Supplying, installing, fixing, connecting and testing of polymer based Drop-out fuse set (set of 3 nos), mounted on insulatorswith steel frame 200 Amps capacity, siutable for 11KV, HT system,out door type, including Expulsion fuse carriers and fuse element Upto 25 Amp, including taking down old unserviceable one complete all as specified and directed. Make : Universal/National or its equivalant.Note for Item No 11.094 & 11.095 : The work to be carried out in existing structure. Hence continues shut down will not be available. According to the availabity of shut down timing the contractor shall manage the work in quoated rate only. 108 M&L for Painting of HTpoles including cross arms complete with synthetic enamel paint including filling cavities with filler one coat after cleaning all dust/rust including writing the pole No. and all as directed by Engr-in-Charge 109 M & L for Servicing of Molded Case Circuit Breakers (MCCBs)/ACB in existing panelsincluding cleaning, tightening of connections, checking of mechanical operation, insulation resistance testing, functional testing, lubrication of moving parts, and recording of test results. All tools, materials, labor, and consumables to be included for following capacity:- 110 630 Amps ACB 4 pole,415 volt manual drawout type with micro processor release 111 3 Pole 350A MCCB, 36 kA 112 3 Pole 250A MCCB, 36 kA 113 3 Pole 160A MCCB, 36 kA 114 3 Pole 125A MCCB, 36 kA 115 3 Pole 100A MCCB, 36 kA 116 3 Pole 63A MCCB, 36 kA 117 3 Pole 32A MCCB, 16 kA 118 S & F in repairs ACB 4 Pole, current rating 630 Amp, adjustable over load and short circuit with Micro processor release setting , breaking capacity 36 kA at 415V, 50Hz, of(Make : L & T Cat No CM96111OOOOX1 or equivalent in Legrand / Schenedier) incl necessary spreaders / cable lugs / nut, bolt and washers if required all as directed. 119 S & F for 4 pole MCCB400 A, having breaking capacity 36 kA (Make : L & Tor equivalent in Legrand / Schenedier) complete all as specified and as directed. 120 S & F for4 pole MCCB 250 A, having breaking capacity 36 kA (Make : L & Tor equivalent in Legrand / Schenedier) complete all as specified and as directed. 121 S & F for4 pole MCCB 200 A, having breaking capacity 36 kA (Make : L & Tor equivalent in Legrand / Schenedier) complete all as specified and as directed. 122 S & F for 4 pole MCCB 160 A, having breaking capacity 36 kA (Make : L & Tor equivalent in Legrand/ Schenedier)complete all as specified and as directed. 123 S & F for 4 pole MCCB 100 /125 A, having breaking capacity 36 kA (Make :L & Tor equivalent in Legrand / Schenedier) complete all as specified and as directed. 124 S & F for 4 pole MCCB 63 A, having breaking capacity 10 kA, (Make : L & Tor equivalent in Legrand / Scheneider) complete all as specified and as directed. 125 M&Lfor switch air break gang operated triple pole mechanically operated mounted on HT insulators horizontal type and MS galvanized steel frame with operating mechnizing worked from ground level including operating rod of size 32 mm dia / 25 mm dia as reqd GI medium grade for current rating upto 200 Amps 22000 volts complete with locking arrangement ,ms clamps ,bolts ,nuts and washers etc.including two coat of aluminium paint over a coat of red oxide primer on ms work complete all as specified complete all as specified and as directed. 126 S&F for drop out fuse assy single pole 22KV , 25 Amps rating complete expulsion fuse element mounted on four /two pole structures complete all as specified and as directed.(Necessaty Nut, bolt and washers should be included in above quoted rate) 127 S&F fordrop out fuse assy single pole 11KV , 25 Amps rating complete expulsion fuse element mounted on four / two pole structuresincluding dismanteling old existing UNSV all as specified and as directed.(Necessaty Nut, bolt and washers should be included in above quoted rate) 128 S&F for pin type insulator, HT Polymer/porcelain vitreous white, brown or green of size 150 mm high and 150 mm dia, ISI marked including one galvanised steel spindle, two galvanised iron washers and one galvanised iron nut suitable for 22000 volts including dismantling insulator any type / any sizecomplete all as specified and as directed. 129 S&F for insulator disc type single disc assembly, ISI marked working pressure 22000 volts, porcelain vitreous white, brown, or green size 145 mm high and 255 mm dia ball and socket with tension clamp to suit the size of conductor (ACSR)including dismantling insulator any type / any size complete all as specified and directed. 130 M&L for aluminium strip 25 x 4 mm of required lengthwith color sleeves for jumpering purpose in 11 /22 KV DP/FPincluding taking down existing aluminium conductor etc complete all as per the direction of Engineer-in-charge. 131 S & Ffor gasket set of 22/11 KV 100 KVA to 400 KVA transformer complete all as specified and directed. 132 S& F for silicagel breather complete all as specified and directed. 133 M&L for Testing of exisiting earthing resistance with suitable digital Earth tester complete all as specified and directed 134 S&Fepoxy based insulator with screw, nuts and bolts fixed on OH reservior roof top and on shaft surfaces not more than 2.00 m apart from fixing aluminium or GI strip complete with fixing arragnment complete all as specified and directed. 135 Supply, laying,testing and commissioning or passing through pipe,XLPE insulated, screened, PVC bedded, galvanisedsteel striporwire armoured,electric power cables (heavyduty) with aluminium conductor, 11000 volts Earthed, grade cross sectional area of size 3 core 150 Sqmm 136 Laying in trenches and testing cable XLPE insulated screen PVC bedded galvanized steel strip or wire armoured, electric power cable heavy duty with stranded aluminium conductor, 22000 volts grade of size 3 core X 185 sq mm suitable for earthed system etc complete.(Note-HTcablewill be issued under Sch B free for fixing/laying). 137 Supply, installation and testing complete electronic digital type water level indicator devicesuitable for operating at 230V +/- 10%, 50 Hz sysytem having 150mm size digital display and alarm at low/high level of OHT / sump.The complete unit fitted in MS sheet base in two boxes, one box to be installes at sump/OHR and second at pump house bothunit to be connected with flrxible copper cable of .5 sqmm 8 pair and length from sensor to pump house building or OH reservoirs of 21 mtr and 15 mtr staging,All enclosed in sheet metal enclosures of 02mm thick with hinged door and locking arrangement and support GI wire/PVC pipe etc properly laid or fixed on wall / surface all as directed by Eingr-in-charge.Make- SECO type DDS-6 or equivalent model in Schneider/ Havels/ L&T. 138 Supply & Fixing/Laying Double Wall Corrugated (DWC) HDPE Pipes of outer dia 40 mm including 90 degree bends, with coupler and rubber ring,confirming to IS:16205 Part 24 Type 450N, for laying of LT cables protection in trenches etc complete with all accessories all as specified and directed. 139 Supply & Fixing/Laying Double Wall Corrugated (DWC) HDPE Pipes of outer dia 50 mm including 90 degree bends, with coupler and rubber ring,confirming to IS:16205 Part 24 Type 450N, for laying of LT cables protection in trenches etc complete with all accessories all as specified and directed. 140 Supply & Fixing/Laying Double Wall Corrugated (DWC) HDPE Pipes of outer dia 75 mm including 90 degree bends, with coupler and rubber ring,confirming to IS:16205 Part 24 Type 450N, for laying of LT cables protection in trenches etc complete with all accessories all as specified and directed. 141 Supply & Fixing/Laying Double Wall Corrugated (DWC) HDPE Pipes of outer dia 90 mm including 90 degree bends, with coupler and rubber ring,confirming to IS:16205 Part 24 Type 450N, for laying of LT cables protection in trenches etc complete with all accessories all as specified and directed. 142 Supply & Fixing/Laying Double Wall Corrugated (DWC) HDPE Pipes of outer dia 110 mm including 90 degree bends, with coupler and rubber ring,confirming to IS:16205 Part 24 Type 450N, for laying of LT cables protection in trenches etc complete with all accessories all as specified and directed. 143 Supply & Fixing/Laying Double Wall Corrugated (DWC) HDPE Pipes of outer dia 120 mm including 90 degree bends, with coupler and rubber ring,confirming to IS:16205 Part 24 Type 450N, for laying of LT cables protection in trenches etc complete with all accessories all as specified and directed. 144 Supply & Fixing/Laying Double Wall Corrugated (DWC) HDPE Pipes of outer dia 160 mm including 90 degree bends, with coupler and rubber ring,confirming to IS:16205 Part 24 Type 450N, for laying of LT cables protection in trenches etc complete with all accessories all as specified and directed. 145 MISC ITEMS OFEXTERNAL WATER SUPPLY 146 Laying and testing ductile iron pipe with internal cement mortor lining and external zink pipes confirming to IS:8329-2000 with class of pipe K-7 of size 150 mm including rubber tyton joints. Complete all as specified andas directed.Note - DI pipe 150mm bore will be issued under Sch B for fixing only. (Rates of DI fitting required for sch B items will be included in the quoted rates) 147 Laying and testingductile iron pipe with internal cement mortor lining and external zink pipes confirming to IS:8329-2000 with class of pipe K-7 of size 200 mm including rubber tyton joints. Complete all as specified andas directed.Note - DI pipe 200mm bore will be issued under Sch B for fixing only.(Rates of DI fitting required for sch B items will be included in the quoted rates) 148 Laying and testingductile iron pipe with internal cement mortor lining and external zink pipes confirming to IS:8329-2000 with class of pipe K-7 of size 100 mm including rubber tyton joints. Complete all as specified andas directed.Note - DI pipe 100mm bore will be issued under Sch B for fixing only.(Rates of DI fitting required for sch B items will be included in the quoted rates) 149 Supply, fix and testing dual type non return valve of 100 mm bore, cast iron body with both ends flanged,heavy duty (ISI marked) by pass arrangement ,including jointing material, bolts, nuts,rubber packing etc complete confirming to relevent IS. Complete all as specified andas directed. 150 Supply, fix andtesting gun metal dual type non return valve of25mm bore,iron body with both ends flanged,heavy duty (ISI marked) by pass arrangement ,including jointing material, bolts, nuts,rubber packing etc complete confirming to relevent ISComplete all as specified andas directed. 151 M& L for DI fittings & specials such as collar, bends (any type radius, any angle, double end socketted or double flanged or spigot & socket, tail pieces (all socketed or all flanged with an equal & other end taperingbellmouth or flanged plates, connecting pieces straight (both end flanged or socketed of socket & flanged & spigot ends or bellmouth tailpieces ( one end flanged & other end spigot or socket or tatering as bell mouth or flanged ) caps blank flanges heavy duty suitable for run lead joints ofsize from 80 to 200 mm bore. Complete all as specified andas directed. 152 Supply, fix and testing GM gate/globe valves heavy duty conforming to IS 778 with iron wheel head screwed both ends suitable forfollowing sizes ofbore:-Complete all as specified andas directed. 153 25 mm bore 154 40 mm bore 155 50mm bore 156 80 mm bore 157 Install,testingand commissioning of LT distribution outdoor typepanel board compartmentalized fabricated, factory made cubical type dust and vermin proof indoor type power coated 415 volts 3 phase 4 wire 50 HZ front openable with locking arrangement made out of CRCA sheet of 3.15 mm thick with MS angle iron of size 50x50x6 mmto be mounted on floor / wall suitable to accommodate common bus bar and the following accessories:(a) MCCB TPN 100 Amp 25 KA 415 Volt thermal adjustable- 1 No. (b) Copper bus bar 400 Amps. 4 runs duly coloured PVC sleeve (c) Fully automatic star delta starter suitable for 7.5 HP pump set 440 V Model MK-1 Make L and T with electric connection - 02 No. (d) MCCB TP 10 KA 63 Amp - 02 N os (e) MCB DP 32 Amps - 02 Amps(f) Ammete 0-200 amps with CT & selector switch - 01 No (g) Voltmeter 0-500 V with selector switch - 01 No(h) lndiating lamp - LED type RYB ) Complete all as specified andas directed.( Note- LT panel with all fitment accessories shall be issued under Sch B free for fixing ) 158 Install test and commissioning of LT distribution panel board compartmentalized fabricated, factory made cubical type dust and vermin proof indoor type power coated 415 volts 3 phase 4 Wire 50 HZ front openable with locking arrangement made out of CRCA sheet of 2 mm thick with MS angle iron of size 50x50x6 mm to be mounted on floor / wall suitable to accommodate common bus bar and the following accessories :- (a) MCCB TPN 63 Amp 25 KV 415 Volt - 1 No.(b) Copper bus bar 400 amp - 4 runs duly coloured PVC sleeve (c) DOL starter suitable for 3.0 HP pump set 440 V Model MK-1 make L&T with electric connection :- 2 No. (d) MCCB TP 40 Amp 10 KA 415 Volt-2 No (e) MCB DP32 Amp - 2 No.(f) Ammeter 0-100 Amp with CT and selector switches – 1 No(g) voltmeter 0-500 V with selector switch 01 No (h) Indicating lamp LED type RYB – 01 Set.Complete all as specified andas directed.( Note- LT panel with all fitment accessories shall be issued under Sch B free for fixing ) 159 Install, Test, Commissioning of open well submersible pump set 80x80mm for pumping clear water at ambient temperature from UG sump for delivering 25 m3/hours at a total head of 40 mtr complete with suitable electric motor 7.5 HP, 3 phase, 415 volts, 50 HZ with dry run protector and delivering with GI medium grade pipe of 80 mm dia with flanged bend brought outside the sump GL upto 1.0 mtr and including having GI chain/rubber insulated rope of suitable length to lift the pump set with necessary submersible cable connection.Complete all as specified andas directed. ( Note- submersible pump setshall be issued under Sch B free for fixing ) 160 Install, Test, commissioning of open well submersible pump set 25x25 mm for pumping clear water at ambient temperature from UG sump for delivering 165 LPM at a total head of 25 mtr complete with suitable electric motor 3.0 HP, 3 phase, 415 volts, 50 HZ with dry run protector and delivering with GI medium grade pipe of 50 mmdia with flanged bend brought outside the sump GL upto 1.0 mtr and including having GI chain/rubber insulated rope of suitable length to lift the pump set with necessary submersible cable connection .Complete all as specified andas directed.( Note- submersible pump set shall be issued under Sch B free for fixing ) 161 Installation, testing and commissioning of 750 LPM capacity head105 M end suction type centrifugal pump set for water supply assembled and tested for rated efficiency complete with energy efficient motor conforming to IS-12615 common base frame, coupling guard and mechanical seal suitable for operation on 415 ± 10% 50 Hz AC supply slow speed up to 1500 Rpm multistage pump with Bronz impeller includsive of suitable star delta starter inclding cable from starter to motor drawn through flexible metallic conduit pipe starter and suitable PCC foundation etc complete as per manufacturers recommendation. Complete all as specified andas directed. ( Note- Centrifugal pump set shall be issued under Sch B free for fixing ) 162 Installation, testingend suction type centrifugal pump set for water supply assembled and tested for rated efficiency complete with energy efficient motor conforming to IS-12615 common base frame, coupling guard and mechanical seal suitable for operation on 415 Volt + 10%, 50Hz AC supply slow speed up to 1500 Rpm multistage pump with Bronz impeller inclusive of suitable star delta starter inlcuding cable from starter to motor drawn through flexible metallic conduit pipe following capacity inclusive of starter and PCC suitable foundation as per manufacturers recommendations. Capacity 1460 LPM, Head-100M. Complete all as specified andas directed.( Note- Centrifugal pump set shall be issued under Sch B free for fixing ) 163 Supply,install,testing & commissioning of end suction type centrifugal pump set, multistage,bronze impellor,water supply, assembled and tested for rated efficiancy complete with energy efficient motor conforming to IS 12615 common base frame,coupling guard and mechanical seal suitable for operation on 415 volts+/- 10%, 50HZ AC supply of capacity 1500 RPM, 700 LPM, head 70mtr inclusive of PCC foundation ,suction & discharge of pipes as per manufactures instruction.Complete all as specified andas directed.Note:- Cost of suction and discharge pipes upto 7.50 RM long each shall be deemed to be included in the rate quoted. 164 Supply installation,commissioning and testing ofDOSING SYSTEM ( MODEL: ADS-I of ALTOCH) consisting of 40 liter - 100 liter PE/FRP LID & leval gauge along with agitator with shaft and blade in plastic. mounted on tank Complete all as specified andas directed.. (Make : ALTOCH or Equvivalent as approved by Accepting officer) 165 S&F Cast iron body foot valve of size 150 mm bore flanged as per IS 4038 , including nuts, bolts, washers and rubber gaskets, complete all as specified & as directed. 166 Supply installation,commissioning and testing ofdosing pump model 96NGQ51 of Decrain,high presser single head gear motored adjustable dosing pump of following specification:-.(a) Adjustable high presser -0 to 100 PSI (b) Power-230v, 50HZ (c) RPM-44(d) HP 1/10 fractional(e) Out put -2 U.S GPD to 40 USGPDComplete all as specified andas directed.(Make : Decrainor Equvivalent as approved by Accepting officer) 167 S & F Cast iron air release valves with two air outlets of 50mm bore and fixing of cast iron pipe including necessary fittings. Complete all as specified andas directed. 168 Supply,Laying and jointing & testing DI pipe with socket & spigot ends, class K 7 with cement morter lining in side the pipe and zinc coatedout side asper IS 18329/2000 in standard length suitable for push onwith rubber gasket joints(tyton joints) laidintrenchesof size 150 mm bore. Complete all as specified andas directed. 169 Supply, laying, jointing and testing Ductile iron pipes with spigot and socket ends centrifugally cast, Class K-9 conforming to IS-8329of following sizes, in any length, laid in trenches/ pipe supports etc, pressure testing after laying complete a per IS-12288 including styrene butadiene rubber gasket joints, complete all as specified and as directed.NOTE: Tyton joints required are deemed to be included in the unit rate quoted. 170 100 mm bore pipe 171 200 mm bore pipe 172 M&L testing & Commissioning of LT pannel frame CPRI approved, outdoor type,factory made fabircated to CRCA sheet of with min 1.6mm mm thickness, double door front/rear opening and locking arrangement, floor mounted on plateform of suitable size, aluminium bus bar chember (enclosed) with two coat of synthetic enamel paint over a coat of red oxide primer mounted on PCC blocks, fixed with grouted bold,nuts and washer and making complete connection in all respects as diected by engr-in-charge comprising of foillowing parts.INCOMER :-(a)MCCB 200 Amp, FP, Thermal Magnetic release, 35 KA- 01 No as IncomerOUTGOING :-(a)MCCB 160 Amp, TPN,Thermal Magnetic release, 25 KA, 415 Volts - 02 Nos(b)MCB SPN 32 Amps - 01 Nos(c)Indicating lamps (Set of 03 Nos) - 01 Set.(d)Star Delta starter 02 Nos with overload relay ragne 60 Amp- 2 Nos (e) Aluminium bus bar chamber (4 Strips) 3 phase 415 volts 200 Amps fixed on insulatorsall as required - 01 Set 173 (f)Digital voltmeter 0-500 volts with selector switch - 01 Set(g)Digital ammeter with CTs & selector switch 0-100 A cap- 03 Set(h) Panel Wiring with suitable size PVC insulated PVC sheathed 1100 volts grade with copper conductor multi-stranded cable with lugs on both ends of cable.(i) Front operated on load change over switch 100 amps.-01 No .Make : L&T/C&S/ABB/Havells(j) Star Delta starter fully automatic, 3 phase, 415 volts, 50 Hzheavy duty with overload relay ragne 60 Amp having protection against single phase, over load and phase reversal protection. - 02 NosMake of starter BCH/L&T/ Seimen/C&S/Havellscomplete all as specified and directed. 174 M&L testing & Commissioning of LT pannel frame CPRI approved, outdoor type,factory made fabircated to CRCA sheet of with min 1.6mm mm thickness, double door front/rear opening and locking arrangement, floor mounted on plateform of suitable size, aluminium bus bar chember (enclosed) with two coat of synthetic enamel paint over a coat of red oxide primer mounted on PCC blocks, fixed with grouted bold,nuts and washer and making complete connection in all respects as diected by engr-in-charge comprising of foillowing parts.INCOMER :-(a)MCCB 200 Amp, FP, Thermal Magnetic release, 35 KA- 01 No as IncomerOUTGOING :-(a)MCCB 160 Amp, TPN,Thermal Magnetic release, 25 KA, 415 Volts - 02 Nos(b)MCB SPN 32 Amps - 01 Nos(c)Indicating lamps (Set of 03 Nos) - 01 Set.(d)Star Delta starter 02 Nos with overload relay ragne39 Amp- 2 Nos (e) Aluminium bus bar chamber (4 Strips) 3 phase 415 volts 200 Amps fixed on insulatorsall as required - 01 Set(f)Digital voltmeter 0-500 volts with selector switch - 01 Set(g)Digital ammeter with CTs & selector switch 0-100 A cap- 03 Set 175 (h) Panel Wiring with suitable size PVC insulated PVC sheathed 1100 volts grade with copper conductor multi-stranded cable with lugs on both ends of cable.(i) Front operated on load change over switch 100 amps.-01 No .Make : L&T/C&S/ABB/Havells(j) Star Delta starter fully automatic, 3 phase, 415 volts, 50 Hzheavy duty with overload relay ragne 60 Amp having protection against single phase, over load and phase reversal protection. - 02 NosMake of starter BCH/L&T/ Seimen/C&S/Havellscomplete all as specified and directed. 176 MISC ITEMS B/RWORKS 177 S&F factory made Steel fibre reinforced manhole frame and cover 100mm thick of size 1.20m x 0.60m complete all as specified and directed. 178 M & L for recharging of normal earth pits by excavating the earth at a radius of 600mm from the centre from the earth pit and at a depth of 900mm after removing the earth chambers and accessories carefully and keeping aside for reuse including adding and spreading chemicals as given below in 75mm layers each as ground level and watering, refixing the earth chambers and accessories after allowing the soil to settle down complete all as specified and directed by Engr-in charge.(a) Charcoal 10 kg. (b) Salt 10KgNote :- Excavation , refillingis included in quoated rate 179 Supply and fix for repairs earth chambers by demolishing unserviceable earth chambers and fixing new chambers ofPCC 1:3:6 type C1bed and chamber RCC 1:2:4 type B1of size (600X600X200)mm and thickness 120 mm andand CI cover 10mm thick hinged to CIframe duly groted with PCC, complete all as specified and directed. 180 Construction of valve chamber with PCC solid block masonry grade C-5, 200mm thick having 150mm thick hard core and PCC (1:4:8) type D-2 (using 40mm graded stone aggregate in foundation, including excavation & earth work in any type of soil, internal & external plaster to walls in cement morter 1:6, 15mm thick complete all asspecified and shownon drg No CEPZ/93/TD/20M Sht No 1/1 of following internal dimension:- 181 0.60mtr x 0.60mtr x 0.60mtr 182 1mtr x1mtr x1mtr 183 1.2mtr x1.2mtr x1.2mtr 184 Cutting the existing water line 300 mm dia for inserting Tee Reducer bend, coller etc complete ( Note : CI specials, lead joints excavation and earth work shall be measured and paid separately under relevant item of this schedule ) 185 Moblization of necessary equipment & manpower at site of work to carry out plate load test for determination of K Value (Modules of subgrade reaction) of Soil in the field in accordance to IS 9214-1979, complete in all respect, as specified & directed with & including following operations.(a) Digging out Pit of desired size & depth.(b) Placing & arranging Poclain, as per requirement & recording the settlement data with 03 Nos of dial Gauge in Horizontal Plain Placed at 120 degree, using Hydraulic Jack with proving ring & dial gauze of least count 0.002 mm & submission of report in sixtulicate determining modulus of subgrade reaction K Value.
Contract Date: Feb 06, 2026 Contract Value : ₹ 8.36 Crore
Statutory Bodies & Commissions/Committees No of Bidders 6
Maharashtra View Result →
37.
Rural Development #9405847 Technical Bid
Tender For Construction Of Rcc Bridge Over Irrigation Canal Near Laxmipur Jamune River In Tekari Belharia More To Chakand More Road In The District Of Gaya Ji Under Ssy; 1 Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Upto 3.000 M Depth 2 Providing service road etc. all complete job as per specifications and direction of E/I. 3 Providing Steel Liner 6 mm thick for Piles including Fabricating and Setting out as per Detailed Drawing. 4 Bored cast-in-situ M35 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m. 5 Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres(Extra Pile Length). Stripping off RCC M35 in the pile up to cut off level and disposal of debris with all leads and lifts. 6 Providing and laying of PCC M15 levelling course 100mm thick below the pile cap. 7 Cement Concrete for Reinforced Concrete M - 35 in Pile Cap complete as per Drawing and Technical Specification 8 Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. 9 Providing RCC M30 Mechanically mixed concrete in abutment shaft &pier shaft with stone aggregate 20 mm nominal size and clean coarse sand of FM-2….All complete job as per designUpto 5 m Height 10 Supply Fitting & Fixing Elasto-Meric Bearing & seismic Pad :-- Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications. Elastomeric Bearing & Pad 11 Providing Weep Holes in Abutment Cap with 100mm dia AC Pipe:-- Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. 12 Supplying, fitting and placing HYSD Bar reinforcementin substructure complete as per Drawing and Technical Specification. 13 Back filling behind abutment, wing wall and return wall, complete as per Drawing and technical Specification.(Sandy Material ) 14 Providing and laying of filter media with granular materials/stone crushed aggregate satisfying the requirement laid down in CI. 2504.22 of MORTH Specification of not less than 600mm behind abutment, wing and return wall to the full height compacted. 15 Providing RCC M 30 Grade & Super structure :--Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical SpecificationBeyond 5 m and upto 10m Hieght (T Beam Slab) 16 Providing HYSD Bar in all types of RCC work:-- Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications . 17 Wearing Coat :-- Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications 18 Providing RCC M30 Grade In Railing:--Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications. 19 Providing Drainage spout:-- Drainage Spouts complete as per drawing and Technical specification 20 Providing PCC M15 gradeBelow Approach Slab:-- PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification 21 Providing PCC / RCC M30 in Approach Slab:-- Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification 22 Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturers instructions for installation. 23 Providing and applying two coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ IL per sq.m. 24 Numbering & writing Bridge details with 2 coats of enamel paint of approved shade & make including cost of all materials, labour, tools etc. as per SOR Item 8.3 25 Providing and Painting of flood gauge on substructure to full height and 500mm wide including cost of all materials, labour, tools etc. 26 Pile Load Test on single Vertical Pile in accordance with IS:2911(Part-IV) including dynamic load test for its integrity , length & capacity a) Initial and routine load test 27 Pile Load Test on single Vertical Pile in accordance with IS:2911(Part-IV) including dynamic load test for its integrity , length & capacityb) Lateral load test 28 Conducting Confirmetry Boring , Sampleing of soil, Conducting S.P.T. & Lab Testing of soil sample 29 Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. 30 Providing and laying pitching on slopes laid overprepared filter media including boulder apron laid dry in front of toe of embankment complete as per Drawing & Technical Specifications. SOR Item-15.4A (Ref. MORTH CI.2504) 31 Providing and laying filter materials underneath pitching in slopes complete as per Drawing & Technical Specifications.SOR Item-15.5 32 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. 33 Construction of embankment with material obtained from borrow pits vide S.O.R. item No. 3.16 MOST CI. 305. 34 Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 35 Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. (Grading-I) 36 Water Bound Macadam:- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. Grade - III 37 Prime Coat :- Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. 38 Tack Coat :- Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with Primer and clened with hydriloc broom as per technical specification aclouse 503. 39 Mix Seal Surface :- Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 40 Providing and fixing of typical any project informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 41 Providing boundary pillars and F.I Posts as per S.O.R. Item 8.16, MORTH CL. 806. 42 Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of2.5 mm is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level, uniform and free from streaks and holes. 43 Clearing and Grubbing Road Land including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees ofgirth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of E/I 44 Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 45 Tack Coat :- Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with Primer and clened with hydriloc broom as per technical specification aclouse 503. 46 Semi-Dense Bituminous Concrete :- Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects. 47 Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of2.5 mm is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level, uniform and free from streaks and holes. 48 ADD FOR LABOUR CESS @ 1% 49 ADD SEIGNIORAGE FEE 50 ADD FOR GST @ 18% 51 1St Year Maintenance 52 2nd Year Maintenance 53 3rd Year Maintenance 54 4th Year Maintenance 55 6th Year Maintenance 56 7th Year Maintenance 57 ADD FOR LABOUR CESS @ 1% 58 ADD SEIGNIORAGE FEE 59 ADD FOR GST @ 18%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Bihar View Result →
38.
Housing Urban and Rular Development #9405095 Technical Bid
Supply of Furniture And Internal Fit-Out At Jnv, Anjaw, Arunachal Pradesh , School Building , (A) Classroom , (I) Classroom Desk Large Size Supply & Installation Big Desk (For Two Persons)-The Overall Dimensions Of Desk Will Be 1066Mmx 930Mm X Height 760Mm, Complete As Per Specifications Enclosed And Direction Of Engineer-In- Charge Having The Table Top Shall Be Made Up Of 18.0 Mm Thick Plywood Is 303 Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish). Table Top Dimensions Shall Be W 930 Mm X D 380 Mm. Edge Towards Bench Shall Be Post Formed With Round Edge. The Remaining Three Edges Must Be Sealed With 2Mmthick Pvc Edge Banding Tape. Edge Band Must Be Trimmed On Edges And Corners. The Desk Shall Be Have Low Chemical Emission Of Vocs (Voltage Organic Compounds) And Carcinogens, Contributing To A Healthier Room Environment. Seat And Back Rest Shall Be Made Of 18Mm Thick Plywood Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish) Except Back Rest. Back Rest Shall Be Have Both Sides Colour Lamination. Technical Details Of Seat And Back Rest Are Mentioned Below:Seating Bench Dimensions Shall L 930 Mm X W 300 Mm X H 450 Mm. Front Side Shall Be Rounded With Post Forming. Remaining Three Edges Shall Sealed With 2Mm Thick Pvc Edge Banding Tape. Back Rest Dimensions Shall L 930 X H 200 Mm Upper Side Shall Be Rounded With Post Forming Remaining Three Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding Tape. Desk Shelve Shall Be Made Of Prime Quality 0.8Mm Thick Crca Sheet Of H150mmxd300mm And Side Stiffeners Of Crca Tube Size 19Mmx19mmx1mmthick. One Vertical Support (Partition) Of Square Tube Size 25Mm Square X1.2Mm Thick Must Be Provided At Centre Of Tray . Upper Modesty Made Of Prime Quality 0.8Mm Thick Crca Sheet Powder Coated Should Be Embossed With Dimples In Round Shape, Height Will Be 150Mm, There Should Be Perforated Lower Modesty Made Of Prime Quality 0.8 Mm Thick Crca Sheet Of Size H150mmxd21mm With Square Perforation, Crca Tube Of Size 19X19x1mm Thick To Be Inserted For Full Length At Bottom Of Jali . Bag Hook Should Be Provide On Both Side Of Piller Made Of Minimum 4Mm Dia Rod Side Frame Structure:- Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25Mmx50mmx1.2Mm Thick Crca Tube , Seat And Back Side Frame Structure Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25.4Mm Diameter X 1.6Mm Thick Erw-1Pipe , There Will Be 8No. Horizontal Supports Are 25Mmx25mmx1.2Mm Thick Crca Pipes. Bottom Rectangular Tube 50X25x 1.2Mm Thick Should Be Closed With Ppcp Cap Bothside Sand Pipe Dia. 25.4X1.6Mm Thick Should Be Closed With Metal (Backside) And Other Side (Undertheseat) Ppcp Cap, Complete As Per Engineer Incharge Desk Should Be In Semi Knock Down Form With The Help 16 Connecting Pipes ; 8 Pipes On Each Side : Connecting Pipe Size Will Be 20X20x1.2Mm .All Metal Pieces Shall Be Welded Properly Strongly And Conformity With Regulations With Co2 Welding Shall Be Used , Crca Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form A Layer Of Base Coating Of (Iron Phosphating) (0.4 – 0.8) Gm/M² , Automatic Spray Coating Shall Be Applied To Be Followed By A Drying Process In A Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 Tank Treatment With Minimum 45-50 Micron Powder Coating. , (Ii) Classroom Desk Medium Size Supply & Installation Medium Desk (For Two Persons)-The Overall Dimensions Of Desk Will Be 900Mm X 890Mm X Height 690Mm, Complete As Per Specifications Enclosed And Direction Of Engineer-In- Charge Having The Table Top Shall Be Made Up Of 18.0 Mm Thick Plywood Is 303 Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish). Table Top Dimensions Shall Be W 890 Mm X D 380 Mm. Edge Towards Bench Shall Be Post Formed With Round Edge. The Remaining Three Edges Must Be Sealed With 2Mmthick Pvc Edge Banding Tape. Edge Band Must Be Trimmed On Edges And Corners.The Desk Shall Be Have Low Chemical Emission Of Vocs (Voltage Organic Compounds) And Carcinogens, Contributing To A Healthier Room Environment. Seat And Back Rest Shall Be Made Of 18Mm Thick Plywood Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish) Except Back Rest. Back Rest Shall Be Have Both Sides Colour Lamination. Technical Details Of Seat And Back Rest Are Mentioned Below:Seating Bench Dimensions Shall L 890 Mm X W 300 Mm X H 400 Mm. Front Side Shall Be Rounded With Post Forming. Remaining Three Edges Shall Sealed With 2Mm Thick Pvc Edge Banding Tape. Back Rest Dimensions Shall L 890 X H 200 Mm Upper Side Shall Be Rounded With Post Forming Remaining Three Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding Tape. Desk Shelve Shall Be Made Of Prime Quality 0.8Mm Thick Crca Sheet Of H150mm X D300mm And Side Stiffeners Of Ss Crca Tube Size 19Mmx19mmx1mmthick. One Vertical Support (Partition) Of Square Tube Size 25Mm Square X1.2Mm Thick Must Be Provided At Centre Of Tray . Upper Moedsty Made Of Prime Quality 0.8Mm Thick Crca Sheet Powder Coated Should Be Embossed With Dimples In Round Shape, Height Will Be 150Mm, There Should Be Perforated Lower Modesty Made Of Prime Quality 0.8 Mm Thick Crca Sheet Of Size H150mmxd21mm With Square Perforation, Crcat Ube Of Size 19X19x1mm Thick To Be Inserted For Full Length At Bottom Of Jali . Bag Hook Should Be Provide On Both Side Of Piller Made Of Minimum 4Mm Dia Rod Side Frame Structure:- Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25Mmx50mmx1.2Mm Thick Crca Tube , Seat And Back Side Frame Structure Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25.4Mm Diameter X 1.6Mm Thick Erw-1Pipe , There Will Be 8No. Horizontal Supports Are 25Mmx25mmx1.2Mm Thick Crca Pipes. Bottom Rectangular Tube 50X25x 1.2Mm Thick Should Be Closed With Ppcp Cap Bothside Sand Pipe Dia. 25.4X1.6Mm Thick Should Be Closed With Metal (Backside) And Other Side (Undertheseat) Ppcp Cap, Complete As Per Engineer Incharge Desk Should Be In Semi Knock Down Form With The Help 16 Connecting Pipes ; 8 Pipes On Each Side : Connecting Pipe Size Will Be 20X20x1.2Mm .All Metal Pieces Shall Be Welded Properly Strongly And Conformity With Regulations With Co2 Welding Shall Be Used , Crca Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form A Layer Of Base Coating Of (Iron Phosphating) (0.4 – 0.8) Gm/M² , Automatic Spray Coating Shall Be Applied To Be Followed By A Drying Process In A Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 Tank Treatment With Minimum 45-50 Micron Powder Coating. , (Iii)Teacher Table :Supplying And Installation Of Knock Down Type Office Table Made Of Pre-Laminated Mdf Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Top Of Size 1200 X 600 X 750 Mm. Worktop Shall Be Rounded In All Four Corners And Should Have An Overhung Of 50Mm Alongwith One Drawer Unit Made Of 0.5Mm Thick Crca Steel Sheet. The Table Top Shall Be Supported Over Legs Consists Of 4 Powdered Coated Ms Legs With Connected Beams With Pipe Size 25X25x1.2 Mm Thick. , (Iv)Teachers Chair, Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (V) Teacher Board [Excluding Cost Of Interactive Flat-Panel Display (Ifpd)] Technical Specification For Smart Board With Double-Track Sliding System For Green And White Boards Fitted In An Anodised Aluminium Frame With Concealed Cable Management And Provision For Mounting Of Digital Screen: Supply, Installation, Testing, Commissioning (Sitc) Of An Integrated Digital Teaching–Learning Solution Comprising: (A) Anodised Aluminium Frame, Double Track Sliding System For White & Green Board And Provision For Mounting Of Digital Screen With Concealed Cable Management, (B) Vitrified Magnetic Ceramic-Steel Green Board And White Board Panels. • Dimensions And Configuration: Total Width Of The Setup Is ~12 Feet And Height ~4.0 Feet From The Board Surface (Excluding The Width Of Aluminium Frame). • Material: Providing And Fixing Anodised Aluminium (Alloy 6063-T6) Framed Sliding System For Smart Board With Minimum 2.0 Mm Thick Extruded Sections, Anodised To Aa15 Grade As Per Is 1868, Mounted On A Heavy-Duty Top-Hung Aluminium Track (Min. 2.5 Mm Thick) With Sealed Ball-Bearing Nylon/Pu Rollers (Load Capacity Not Less Than 120 Kg Per Panel), Concealed Bottom Guide, Epdm Gaskets, Ss-304 Fasteners, Pelmet/Valance Cover, And Soft End-Stops/Soft-Close Mechanism, Including All Brackets, Fixings, Alignment, Cable Provisions, Commissioning, And Making Good Complete As Per Drawings And Engineer-In-Charge. • Design: One Slot To Fix Ifpd, Other Slot For Green & White Boards Sliding On Double Track System With Locking Facility On Sliding Frame To Keep The Ifpd Display Safe. • Top & Bottom Rails: Tracks Shall Be Aligned And Reinforced To Ensure Boards Move Easily And Without Wobble. • Back Side: The Backside Of The Smart Board, To Concealed The Wall Surface, Provided & Fixed With 18 Mm Thick Hdhmr Board Laminated (White Coloured Matte Finish) With 0.8 Mm, Edges Sealed With 1 Mm Pvc Edge Banding, Fixed To The Anodised Aluminium Frame With Concealed Screws/Rivets, With Ventilation Slots As Required, And Shall Be Moisture, Termite And Borer Resistant. • Load Capacity: Safe To Hold Ifpd + White & Green Boards With =1.5× Safety Factor. • Cable Management: Built-In Channels For Power, Lan, Hdmi, Usb. • Safety: Rounded Edges, Tamper-Resistant Covers, Concealed Fixing. • Finish: Durable, Corrosion-Resistant Coating Suitable For Indoor Use. • Additional Requirements:(A) All Boards And The Structure Must Be Securely Fixed To The Wall With Appropriate Fasteners. (B) Provision For Cable Management Must Be Included For The Ifpd (I.E., Concealed Conduit/Path For Power And Data Cables). , (C) The Unit Must Be Free From Sharp Edges, Splinters, Or Any Protruding Parts That Could Cause Injury. (D) Installation Height Should Ensure Comfortable Writing Access For Average Adult And Student Height (Typically Bottom Edge ~2.5 To 3 Feet From The Floor). (B) Vitrified Magnetic Ceramic-Steel Green Board And White Board Panels: • Function: Boards Shall Slide Horizontally On A Top And Bottom Aluminium/Steel Channel Track To Fully Cover Or Reveal The Ifp As Needed. • Material: Vitrified Ceramic-Steel, Magnetic, Double-Coated. • Sliding Boards: Quantity: 1 No. Green Board & 1 No. White Board. • Green Board Surface: Matte, Chalk-Friendly, Stain/Scratch Resistant. • White Board Surface: Glossy Surface, Dry-Erase Marker Friendly, Ghost-Free, Easy Clean. • Size: ~6 Feet (W) × 4 Feet (H) (Each Board) With Thickness 8Mm. • Frame: Anodised Aluminium, Rounded Edges, Concealed Fasteners.Note - Dimensions Mentioned Are Indicative. Actual May Vary As Per Site Requirements , (B) Principal And Vice-Principal Room , Table: Supplying And Installation Of Site Knock Down Type Office Table As Per Approved Design And Directrion Of Engineer-In-Charge. Worktop-Worktopshallbemade25mmthickpre-Laminatedmdfboardwithdecorativelaminationononesideandbalancing Lamination On Other Side Confirming To Is 12406:2003 With Post Forming On Front,Back Andmachine Pressedpvc Egde Banding 2Mm Thick Glued With Industrial Adhesive And Diffused With Board Monolithically On Other Two Sides. Table Top Shall Have 75Mm Overhung On Front And 25Mm Overhung On Sides. Understructure- C-Type Leg Shall Be Made Of Tubular Section Of 50Mm X 50Mm X 1.6Mm (Wall Thickness) Thick Vertical Member And40mm X40mmx1.6Mm(Wall Thickness) Horizontal M.S.Pipe Confirming Is-Grade 4932Shall Be Finished With Epoxy Polyster Powder Coated Dft50-60Micron.Thelegsshallbefittedtothegroundwithm8screwlevelerwiththeheightadjustmentupto15mm.Thecross Membersshallbemountedbyendbracketsmadeof3mmthickcrcasteelsheetconfirmingis513:2008 Andfinishedwithepoxy Polyster Powder Coated Dft 50-60 Micron Confirming Is 13871:1993. Wiremanagement-Electricalwiresshallbecarriedfromhorizintal/Verticalduct Madeof0.7Mmcrca Steelsheet Confirmingtois 513:2008. The Switch Plate Or Grommet Depending Upon Requirement Shall Also Be Provided For Electrical/Lan Connection On Table Top. Modesty Panel -Modesty Panel Of Height 450Mm Shall Be Made Of 1.5Mm Thick Crca Sheet Sheet Confirming To Is 513: 2008And Shall Be Finised With Epoxy Polyster Powder Coated Dft 50-60Micron. Storage Body- Storage Top Shall Also Be Made Of 25Mm Thick Pre-Lam Mdf Board Confirming To Is 12406:2003 With Post Forming On Two Sides And Machine Pressed Pvc Egde Banding 2 Mm Thick Glued With Industrial Adhesive And Diffused With Board Monolithically On Other Two Sides. The Body Of Storage Unitsshall Be Made Of 0.8Mm Thick Crca Steel Sheet And Skirting Shall Be Of 1.2Mm Thick Crca Steel Sheet Confirming To Is 513: 2008 Finished With Epoxy Powder Coated Of Dft 50-60 Micron Confirming Is 13871:1993. Internal Shelves Shall Be Also Made Up Of 0.8Mm Crca Steel Sheet Confirming To Is 513: 2008 And Shall Be Mounted With The Metal Shelf Support Pin Made Of 2Mm Thick Crca Steel Sheet With Nickel Or Chrome Plating.M10 Screw Leveler Is Given With Height Adjustment Up To 12Mm To 15Mm. , (I) Principal Room Table Table Of Size 1800Mm (W) X 900Mm (D) X 750Mm (H) With Side Storage Of Size 900Mm (W) X 450Mm (W) X 750Mm (H) And Back Storage 1800Mm (W) X 450Mm (D) X 750Mm (H) As Per Specifications Above , (Ii) Vice-Principal Room Table Table Of Size 1650Mm (W) X 900Mm (D) X 750Mm (H) With Side Storage Of Size 900Mm (W) X 450Mm (W) X 750Mm (H) And Back Storage1650 Mm (W) X 450Mm (D) X 750Mm (H) As Per Specifications Above. , (Iii) Principal Room Chair High Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1210H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat,Used Pu Moulded Foam On Seat Of D-45 Kg/M3 , Back Ofchair Is Made Of Injection Moulded Pp Material Structure Upholstered With Mesh Fabric , Adjustable Lumber Support Upholstered With Fabric , Adjustable Headrest On Back Upholstered With Mesh Fabric ,Seat Size:- 470W ±10 X 460D ±10 X 70Thick. ±5 Mm , Back Size:500W±10X780h±10,Mechanism:-Thesynchrotiltmechanism,Usedgasliftof90mmsizeofclass-Ivgrade,Armrest:-Pu Paddedadjustable Armrestfixedwith Seat ,Chair Base & Wheels: Ss 202 Polished Finish Plated Base Consists Of5 Prongs With 640±5Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , (Iv) Principal Roomvisitor Chair, Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (V) Vice-Principal Room Chair High Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1210H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat,Used Pu Moulded Foam On Seat Of D-45 Kg/M3 , Back Ofchair Is Made Of Injection Moulded Pp Material Structure Upholstered With Mesh Fabric , Adjustable Lumber Support Upholstered With Fabric , Adjustable Headrest On Back Upholstered With Mesh Fabric ,Seat Size:- 470W ±10 X 460D ±10 X 70Thick. ±5 Mm , Back Size:500W±10X780h±10,Mechanism:-Thesynchrotiltmechanism,Usedgasliftof90mmsizeofclass-Ivgrade, Armrest:-Pu Paddedadjustable Armrestfixedwith Seat ,Chair Base & Wheels: Ss 202 Polished Finish Base Consists Of5 Prongs With 640±5Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , (Vi) Vice Principal Visitor Chair: Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (C) Sofa Set , (I)Sofa Foyer One Seater Size In Mm - 880(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (Ii)Sofa Foyer Two Seater Size In Mm - 1460(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (Iii)Sofa Foyer Three Seater Size In Mm - 1930(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (Iv) Coffee Table The Coffee Table Measures 900 Mm (W) × 600 Mm (D) × 450 Mm (H) And Features A 10 Mm Thick Clear Tempered Glass Top And Shelf Supported On A Stainless Steel 202 Frame Made Of 40×40 Mm Square Tubes With A Mirror-Polished Finish. All Joints Are Argon-Welded, Ground, And Buffed For A Seamless Look. The Lower Glass Shelf For Additional Storage, And Rubber Pads Or Level Adjusters Are Provided At The Base For Stability And Floor Protection. The Table Combines Modern Design, Durability, And Elegant Finish, Making It Ideal For Offices And Reception Areas. , (D) Staffroom , (I) Table (Seating Capacity As Per Actual Requirement) Supplying And Installation Of A Modular, Knock-Down Center Island Table Sized Approximately 3600 Mm In Length (Adjustable To Actual Requirements) By 1350 Mm In Width And 750 Mm In Height, Constructed From High-Quality 25 Mm Thick Commercial Grade Plywood Or Bwr (Boiling Water Resistant) Grade Plywood With Decorative Lamination On Visible Faces And Balanced Lamination Beneath For Enhanced Strength And Moisture Resistance. All Edges Are Sealed With 2 Mm Thick Machine-Pressed Pvc Edge Banding Bonded With Industrial Adhesive To Ensure A Seamless, Monolithic Appearance. The Gable Ends Are Fabricated Of The Same 25 Mm Thick Commercial Grade Plywood With Decorative Lamination On Both Sides And Matching Edge Banding For Consistent Aesthetics And Superior Durability.Modesty 18Mm Matching Laminate. The Table Shall Have An Underbody Vertical Support Panel Running Continuously Along Its Length To Enhance Stability And Strength.The Understructure Uses Precision-Cut, Laminated Plywood Panels Assembled With Knock-Down Fittings For Ease Of Installation And Future Reconfiguration, Ensuring Superior Load-Bearing Capacity And Long-Term Durability. A Concealed Wire Management System Beneath The Worktop Integrates Pre-Laminated Plywood Cable Trays Or High-Quality Plastic Trays Fixed With Durable Brackets, Complete With Provisions For Switch Plates And Grommets To Facilitate Safe, Organized Routing Of Electrical And Data Cables. All Surfaces Are Finished For Scratch And Stain Resistance With Anti-Fungal And Moisture-Resistant Properties, And Installation Will Follow Best Woodworking Practices, With Final Dimensions And Seating Capacity Determined By The Actual Site Layout. , (Ii) Work Space With In-Built Lockable Overhead Storage Space For Staffroom (As Per Actual Requirement) Supplying And Installation Of Site Knock-Down Type Modular Wall-Mounted Workspace Unit Of Approximate Size 900W X 600D X 750H Mm (For One Staff), Including Working Counter And Lockable Overhead Storage Cabinet Of 900W X 450D X 650H Mm. The Structure Shall Be Made Of 18 Mm Thick Bwp Grade Plywood With Decorative Laminate On External Surfaces And Balancing Laminate On Inner Faces Conforming To Is:303/Is:12406. All Exposed Edges Shall Be Sealed With 2 Mm Pvc Edge Banding. The Worktop Shall Be 25 Mm Thick Laminated Plywood Board With Post-Formed Front Edge And Machine-Pressed Pvc Edge Banding, Securely Fixed To The Wall Using Concealed Ms Cleats And Brackets. The Overhead Cabinet Shall Be Fitted With Soft-Close Concealed Hinges, Ss Handles, And Magnetic Catchers Of Approved Make, With One Adjustable Shelf And Modular Connectors For Alignment And Expansion To Adjoining Units. Each Workspace Shall Include Provision For Electrical Connectivity With 6A/16A Modular Sockets (As Per Requirement) Positioned At Approximately 450 Mm Above Finished Floor Level For Easy Access. The Worktop Shall Have A Circular Cable Hole (50–60 Mm Diameter) With Grommet For Laptop And Equipment Wiring. All Wiring, Sockets, And Conduits Shall Be Concealed Neatly Within The Table Body, Routed Through Internal Pvc Raceways To Maintain A Clean, Clutter-Free Appearance. Junction Boxes And Ducts Shall Be Integrated To Provide Safe, Organized Cable Management Without Visible Wiring. The Entire Unit Shall Be Wall-Mounted Using Heavy-Duty Ms Brackets Or Suitable Fasteners Based On Wall Type, Finished Neatly With Matching Silicone Sealant At All Joints. All Fittings And Hardware, Including Soft-Close Hinges And Handles, Shall Be Of Reputed Make. The Unit Shall Be Termite-Resistant, Moisture-Resistant, Easy To Maintain, And Made From Isi-Marked Prime Quality Boards. The Overall Layout And Detailing Shall Match The Approved Reference Image, With Actual Dimensions Finalized As Per Site Requirements And Direction Of The Engineer-In-Charge. , (Iii) Chair Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (Iv) Personal Locker Unit For Staffroom And One Each For Principal And Vice Principal Room Supplying And Installation Of Metal Lockers With Cam Lock One Unit Consiting Of 380Mm (W) X 450Mm (D) X 1800 Mm (H) With 4 Lockers. Body-Lh And Rh Side And Back Panel Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008. Shelf Hanging Bracket Is Welded On Both The Side Panel By Spot Welding. Shelf Hanging Bracket Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008. Front Frame, Top And Bottom Part Made Up 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008 And Horizontal Part Is Made Up 0.8 Mm Thick Crca Steel Sheet Confirming To Is 513:2008. On A Front Frame Horizontally Provision Is Given At A Common Distance To Hold Shutter Bracket. Locker’S Top Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming Is 513:2008 Which Is Having Standard Dimension 375 X378mm. Shelf Is Also Made Up Of 0.8 Mm Crca Steel Sheet Confirming To Is 513:2008. Shutter- Is Made Up On 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008. All The Shutter Are Hung On Shutter Pin And Shutter Bracket, Louvers Are Given In Shutter For Air Flow. Pvc Flush Handle And Name Plate Is Used For Handling And For Name Plate Tagging. Standard Locking Arrangment Is Used For Locking Each Shutter. The Bodies Including Shelves Are Given Anti-Rust Surface Treatment & Are Powder Coated With Epoxy Polyester Powder Coating Of Dft 50- 60 Micron Confirimg To Is 13871:1993. , (E)Library , (I) Supply And Installation Of Glass-Door Storage Of Size 915 Mm (W) X 482Mm (D) X 1980Mm (H). It Should Have Shelf Thickness Of 0.8Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) With Clear Glass Of > 4.0 Mm Thick And All Other Components Shall Have A Thickness Of 0.8Mm. These Components Shall Be Made Of Crca Steel Sheet ‘D’ Grade High Yield Strength As Per Is 513:2008 The Glass Door Storwel Shall Have A Ss Handle And A Two-Way Locking Mechanism With Shooting Bolt. It Should Have A Height-Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base.All Metal Components Would Be Epoxy Polyster Powder Coated Dft 50-60 Micron Confirimg To Is 13871:1993. , (Ii) Wall Mounted Built In Open Book Shelf : Overall Size 900L (Length May Vary As Per Actual Requirement) X300dx2100hmm,Top Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Banding ,Side Panel Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending , Skirting Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending ,Back Panel Made Up Of 18Mm Thick Postlam Plywood , One Number Of Bottom Storage Cabinets Alongwith The Complete Length Of Heght 600Mm As Per Ref. Image ,Shelf Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending, All Wooden Panels Fix Joints With Minifix Dowels & Other Fitting Equipment , All Wooden Panels Prime Quality Board With Isi Marked. Complete Structure Design Should Be As Per Reference Image. , (Iii) Table (Seating Capacity As Per Actual Requirement) Supplying And Installation Of A Modular, Knock-Down Center Island Table Sized Approximately 3600 Mm In Length (Adjustable To Actual Requirements) By 1350 Mm In Width And 750 Mm In Height, Constructed From High-Quality 25 Mm Thick Commercial Grade Plywood Or Bwr (Boiling Water Resistant) Grade Plywood With Decorative Lamination On Visible Faces And Balanced Lamination Beneath For Enhanced Strength And Moisture Resistance. All Edges Are Sealed With 2 Mm Thick Machine-Pressed Pvc Edge Banding Bonded With Industrial Adhesive To Ensure A Seamless, Monolithic Appearance. The Gable Ends Are Fabricated Of The Same 25 Mm Thick Commercial Grade Plywood With Decorative Lamination On Both Sides And Matching Edge Banding For Consistent Aesthetics And Superior Durability.Modesty 18Mm Matching Laminate. The Table Shall Have An Underbody Vertical Support Panel Running Continuously Along Its Length To Enhance Stability And Strength.The Understructure Uses Precision-Cut, Laminated Plywood Panels Assembled With Knock-Down Fittings For Ease Of Installation And Future Reconfiguration, Ensuring Superior Load-Bearing Capacity And Long-Term Durability. A Concealed Wire Management System Beneath The Worktop Integrates Pre-Laminated Plywood Cable Trays Or High-Quality Plastic Trays Fixed With Durable Brackets, Complete With Provisions For Switch Plates And Grommets To Facilitate Safe, Organized Routing Of Electrical And Data Cables. All Surfaces Are Finished For Scratch And Stain Resistance With Anti-Fungal And Moisture-Resistant Properties, And Installation Will Follow Best Woodworking Practices, With Final Dimensions And Seating Capacity Determined By The Actual Site Layout. , (Iv)Chair, Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (F) Computer Lab , (I) Computer Work Station Supplying And Installation Of Knock Down Type Dual Computer Work Station Of Unit Size 1500Mm (Length, Actual Length May Vary As Per Actual Site Requirement) X 600M (W) X 750Mm (H) For Two Students Work Top- Work Top Shall Be Made 25Mm Thick Laminated Plywood With Decorative Lamination On One Side And Balancing Lamination On Othersideconfirmingtois12823:1990With2mmthickmachinepressedpvcedgebandinggluedwithindustrialadhesiveand Monolithically Diffused With Board On All Sides. Understructure Supporting Frame Consist Oflaminated Plywood Gable Ends Of 18Mm Wire Management-The Vertical /Electrical Duct & Horizontal Cabletray ( Wire Carriers) Aremadeof Crca Steel Sheet & Fixed To The Understructure Below Worktop With Specially Designedbrackets. Provision For Fixing Switch Platesare Prividedin The Cable Tray For Easy Access Through Wire Mangaer Or Pvc Grommet. , (Ii) Computer Chair For Student Medium Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1010H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat ,Used Pu Moulded Foam On Seat Ofd-45 Kg/M3 , Back Of Chair Is Made Of Injection Moulded Pp Material Structure Combination Of Upholstered With Mesh Fabric , Seat And Back Connected Through Metal Powder Coated Plate Having Adjustable Lumber Support Upholstered With Fabric , Seat Size:- 490W ±10 X 450D ±10 X 70Thick. ±5 Mm , Back Size: 525W ±10 X640h ±10,Mechanism:- The Synchro Tilt Mechanism ,Using Gaslift Of 90 Mm Size Of Class 3 Grade,Armrest: Pu Padded Adjustable Armrest,Chair Base & Wheels: Revolving Pedestal Ss 202 Polsihed Finish Base Consists Of 5 Prongs With 640±5 Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , (G) Laboratories , (I) Supply And Installation Of Glass-Door Storage Of Size 915 Mm (W) X 482Mm (D) X 1980Mm (H). It Should Have Shelf Thickness Of 0.8Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) With Clear Glass Of > 4.0 Mm Thick And All Other Components Shall Have A Thickness Of 0.8Mm. These Components Shall Be Made Of Crca Steel Sheet ‘D’ Grade High Yield Strength As Per Is 513:2008 The Glass Door Storwel Shall Have A Ss Handle And A Two-Way Locking Mechanism With Shooting Bolt. It Should Have A Height-Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base.All Metal Components Would Be Epoxy Polyster Powder Coated Dft 50-60 Micron Confirimg To Is 13871:1993. , (I) Physics Lab , Along The Wall Table:: Supply And Installation Of Along-The-Wall Knock Down Type Modular Laboratory Tables Of Size 1400 Mm(L) (Length May Vary As Per Actual Requirement) × 750 Mm (W) × 900Mm H . Above The Counter, With An Internal Conduit For All Wiring. Modular Switch Plates And 02 Nos Of 220V/16A Switch Socket (With Individual Circuit Protection) Will Be Cnc-Mounted Every 1 M (Or Per Site Layout). All Conduits And Components Shall Comply With Applicable Laboratory Safety And Performance Standards. Dust-Proof, Removable Access Covers To Permit Maintenance And Future Upgrades, And Outlets To Be Ergonomically Positioned For Seated And Standing Use. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Crca With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg). The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , Island Table:The Laboratory Table Shall Be Provided As Knock Down Type Modular Island Laboratory Tables Units Of Overall Size 8000(L) (Length May Vary As Per Actual Requirement) × 1500(W) × 900H . It Shall Be Constructed In Modular Segments Of 1400(L) × 1500(W) × 860(H) Mm Each For Ease Of Manufacture, Handling, And Installation. The Worktops Will Include A Powder-Coated Bus Running Their Full Length, Above The Counter, With An Internal Conduit For All Wiring. Modular Switch Plates And 04 Nos (02 Facing Each Side) Of 220V/16A Switch Socket (With Individual Circuit Protection) Will Be Cnc-Mounted Every 1 M (Or Per Site Layout). All Conduits And Components Shall Comply With Applicable Laboratory Safety And Performance Standards. Dust-Proof, Removable Access Covers To Permit Maintenance And Future Upgrades, And Outlets To Be Ergonomically Positioned For Seated And Standing Use. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Crca With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg). The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , (Ii) Chemisty Lab , Along The Wall Table: Supply And Installation Of Along-The-Wall Knock Down Type Modular Laboratory Tables Of Size 1400(L) (Length May Vary As Per Actual Requirement) × 750(W) × 900(H) Mm × 1550H (Two-Tier). Four Standard Ss304 Sinks Shall Be Installed, Each Fitted With A 3-Way Ss 304 Faucet Of Premium Make. Reagent Racks Made Completely Out Of Stainless Steel Shall Be Provided To Cover The Entire Table Length(Along The Wall) Except The Sink Area. These Racks Shall Be 300D × 700H And Of Complete Modular Design, Consisting Of Two Horizontal Storage Shelves Made Of Stainless Steel With Suitable Cutouts For Electrical Switches And Sockets. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Stainless Steel Sheet Polished Finish. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Ss Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Stainless Steel Sheet With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg). Reagent Shelves Shall Be Made Of A Ss 304, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , Island Table: The Laboratory Table Shall Be Provided As Knock Down Type Modular Island Laboratory Tables Units Of Overall Size 8000(L) (Length May Vary As Per Actual Requirement) × 1500(W) ×900(H) Mm × 1550H (Two-Tier). It Shall Be Constructed In Modular Segments Of 1600(L) × 1500(W) × 860(H) Mm Each For Ease Of Manufacture, Handling, And Installation. Four Standard Ss304 Sinks Shall Be Installed, Each Fitted With A 3-Way Ss 304 Faucet Of Premier Make. Stainless Steel 304 Reagent Racks Shall Be Provided Across The Entire Table Length In Centre Except The Sink Areas, With Dimensions 300D × 700H. These Racks Shall Also Be Of Modular Design With Two Horizontal Stainless Steel Shelves, Cutouts For Switches And Sockets, Provision For Electrical Outlets, And Accommodation For Granite Pieces. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Ss Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Powder Coated Crca With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg). Reagent Shelves Shall Be Made Of A Polished Finish Ss, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , (Iii) Biology Lab Table , Along The Wall Table: Supply And Installation Of Along-The-Wall Knock Down Type Modular Laboratory Tables Of Size 1400(L) (Length May Vary As Per Actual Requirement) × 750(W) × 900(H) Mm × 1550H (Two-Tier). Four Standard Ss304 Sinks Shall Be Installed, Each Fitted With A 3-Way Ss 304 Faucet Of Premium Make. Reagent Racks Made Completely Out Of Stainless Steel Shall Be Provided To Cover The Entire Table Length(Along The Wall) Except The Sink Area. These Racks Shall Be 300D × 700H And Of Complete Modular Design, Consisting Of Two Horizontal Storage Shelves Made Of Stainless Steel With Suitable Cutouts For Electrical Switches And Sockets. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Stainless Steel Sheet Polished Finish. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Ss Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Stainless Steel Sheet With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg).. Reagent Shelves Shall Be Made Of A Ss, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , Island Table: The Laboratory Table Shall Be Provided As Knock Down Type Modular Island Laboratory Tables Units Of Overall Size 8000(L) (Length May Vary As Per Actual Requirement) × 1500(W) × 900(H) Mm × 1550H (Two-Tier). It Shall Be Constructed In Modular Segments Of 1400(L) × 1500(W) × 900(H) Mm Each For Ease Of Manufacture, Handling, And Installation. Four Standard Ss304 Sinks Shall Be Installed, Each Fitted With A 3-Way Ss 304 Faucet Of Premium Make. Stainless Steel Reagent Racks Shall Be Provided Across The Entire Table Length In Centre Except The Sink Areas, With Dimensions 300D × 700H. These Racks Shall Also Be Of Modular Design With Two Horizontal Stainless Steel Shelves, Cutouts For Switches And Sockets, Provision For Electrical Outlets, And Accommodation For Granite Pieces. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Crca With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg).. Reagent Shelves Shall Be Made Of Polished Finish Ss, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , (Iv) Lab Stool Supply And Installation Of Lab Stool Seat Revolving Stool With Backrest Overall Dimension: 410W ±10 X 410D ±10 X 820H ±10 Mm,Seat Ofchairismadeof12mmthickhotpressedplywoodpastedwithhighdensity Pufoam&Leatherette Upholstery,Back Ismade Of 12Mmthickhotpressedplywoodpastedwithpufoamd-40Kg/M3,H-20Seatandbackfixedthroughmetal Powdercoatedspine Covered With Plastic Cover, Seat Size: 400W ±10X 400D ±10 X 75Thick. ±5 Mm, Back Size: 450W ±10 X 240H ±10 X 50Thick. ±5Mm, Ground To Seat Height-440-560Mm, Mechanism:- Machanism Design With Features Of Revolving At 360 Degree.Machanism Provided Upright Position Locking,Seating Height Can Be Adjusted With A Pneumatic Gas Lift,Gaslift: Lift -Used Gaslift Of 90 Mm Size Of Class- Iv Grade With Plastic Bellow Cover, Chair Base & Wheels: Chair Basemade Of Polished Finished Ss 202 Grade Stainless Steel, Base Consists Of Polished Finished Ss 202 Grade Stainless Steel 5 Prongs With 560±5 Mm Pitch Circle Diameter, Polished Finished Ss 202 Grade Stainless Steel Circular Foot Rest As Per Ref. Image, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor. , Kitchen & Dining , (A) Dining Table Dining Table: Polished Finish Ss Dinning Table Consists Of Dinning Top Is Made Up Of 1 Mm Thickness Stainless Steel Sheet Of Ss 304 Grade With Overall Dimension Of 1800(L) X 700(D) X 750(H). The Table Top Is Reinforced With A 18 Mm Ply Board On Stainless Steel Frame Of Square Section 40Mmx40mmx1.6Mm. Dinning Top Of Stainless Steel Sheet Shall Be Extended To The Sides And A Depth Upto 40 Mm Under The Table Top In All Directions Includingedge Rounding, Grinding And Finishing Etc. All Complete. The Table Top Shall Finish In Such A Manner To Avoid Any Sharp Edges. The Table Will Be Supported By Four Hollow Legs Made From Ss 304 Grade Stainless Steel. The Hollow Legs Shall Be Of Square Type Of Size50mmx50mmx1.6Mm.Theselegsshallbesecurelyweldedormechanicallyfastenedtotheundersideofthetabletopframe.For Additional Structural Stability, Stainless Steel Cross Supports Shall Be Provided Between The Legs As Shown In Figure With 40Mmx40mmx1.6Mm Ss Square Section. The Table Shall Include Rubber Shoes At The Bottom Of Each Leg To Prevent Floor Damage And Ensure Stability. The Design Shall Prioritize User Safety With No Sharp Corners Or Edges. The Table Must Be Structurally Sound And Capable Of Supportingauniformlydistributedloadofatleast250kg.Allmaterialsusedmustconformtorelevantisstandards,Andthefinished Product Should Be Free From Burrs, Dents, Or Deformities. Ss 304. , (B) Dining Bench Dining Bench: The Bench Shall Be Of Size 1800 Mm In Length, 300 Mm In Depth, And 450 Mm In Height, Suitable For Use In Residential Schools. The Bench Top Shall Be Made Of 18 Mm Thick Hdhmr + Laminated , Finished With A 1 Mm Thick Decorative Laminate On The Topsurface, Anda Balancing Laminatebacking On The Underside Toensure Dimensional Stability. All Exposed Edges Shall Be Sealed With Pvc Edge Banding Or Machine-Finished To Prevent Splinters And Enhance Durability. The Plywood Shall Be Scratch-Resistant, Water-Resistant, Andeasytoclean,Withalightwoodgrainorequivalentfinishasapproved.Thesupportingframeshallbefabricatedframeofsquare Hollow Section40mmx40mmx1.6Mmss 304 Grade Stainless Steel In Polished Finish.Theselegsshallbesecurelyweldedtothe Undersideofthebenchtopframe.Thebenchshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability.Thedesignshallprioritizeusersafetywithnosharpcornersoredges.Thebenchmustbestructurallysoundandcapableof Supportingauniformlydistributedloadofatleast250kg.Allmaterialsusedmustconformtorelevantisstandards,Andthefinished Product Should Be Free From Burrs, Dents, Or Deformities. , Boys And Girls Dormitories , Beds/ Partition Wall In Dormitory Hall, Rcc Bed (900Mmx1800mm) With 18Mm Hdhmr With With 1Mm Matt-Finish Laminate On Top Of Bed Shall Be Provided. Rcc Partition Wall Cladding Must Be Using 8Mm Plywood Covered With 2Mm Matt-Finish Laminate All Around Corners And No Sharp Edges. With All Fixtures Fasteners Adhesives Etc All Inclusive Required For Fixing. , Staff Quarters , (A) Rooms Wardrobe , Fabricating, Supplying, Fixing & Placing In Position Wardrobe Of Size 900 (L) X 1800 (H) X 600 (D). The Unit Comprises Of Wardrobe Including, A Single Drawer, Hanger Rod,In Pre Laminated Hdhmr Board Of 18Mm Thickness For Carcase And Shutters With 12Mm Thick Back Panel And Drawer Bottom. 2Mm Edge Banding Matching The Laminiate Selected, Including All Necessary Fixing Arrangement, Glues, Screws, Magnetic Catchers, Handles, Flush Handles For Drawer In Wardrobe, Hinges, Telescopic Sliding Channel For Drawers, As Required. Colour May Vary As Per Approval Of Engineer-In-Charge. [94 Room X 18 Sqft = 1692 Sqft] , (B) Modular Kitchen , (I) Fabricating, Supplying, Installation, Fixing & Placing In Position The Entire Modular Kitchen Under Storage Counter (Height 850Mm) As Per Drawing. The Unit Comprises Of Cabinets, Shutters, Profile Handles, Accessories, Hardware, Glass Etc,. Basic Structural Framing With 18Mm Thick Prelam Hdhmr For Shutters And Carcase And Its Divisions And 12 Hdhmr For Back Panel And Bottom Panel Of Drawers As Mentioned In The Drawing, Edge Banding To Match The Color Of Selected Laminate, Including All Necessary Fixing Arrangement, Nails, Glues, Screws, Magnetic Catchers, Handles, Handles Of Required Lengths As Per The Width Of The Drawer, Shutter, Cabinet, Soft Closing Hinges And Soft Closing Innotech Sliding Channel For Drawers Along With Railings If Required, Fixing The Furniture To The Wall Or To The Floor As Required. All Works Like Fixing The Unit To The Floor Or Wall, Laminates Of Specified Thickness Complete,Other Required Hardware Are Included. Black Granite Countertop, Machine-Cut, Mirror Polished, And Neatly Grouted, Installed True To Level With Proper Support Structure. All Framework Intermittently For Support And Strength, All Details To Be Followed As Per The Drawings And Design Provided And Any Addition Required In Detail Should Be Incorporated In The Shop Drawing To Ensure Complete Functionality And Durability As Intended.All Hdhmr/Plywood And Board Will Be Both Sides Laminte. Nothing Extra Will Be Paid. All Cooridnation Works Based On Civil Dimensions, Integration Of Various Appliances For The Purpose Of Electrical Wiring Are To Be Considered In This Item. Appliances Like Chimney,Sink Etc To Be Paid Seperatly. Natural Stone Counter Top Stone Will Be Provided By The Client And Fixing Will Be Done By The Client Appointed Agency. However Coordination Will Be The Responsibility Of This Contractor. +B69 (Ii) Fabricating, Supplying, Installation, Fixing & Placing In Position The Entire Modular Kitchen Over Head Storage Counter (Height 600Mm) As Per Drawing. The Unit Comprises Of Cabinets, Shutters, Profile Handles, Accessories, Hardware, Glass Etc,. Basic Structural Framing With 18Mm Thick Prelam Hdhmr For Shutters And Carcase And Its Divisions And 12 Hdhmr For Back Panel And Bottom Panel Of Drawers As Mentioned In The Drawing, Edge Banding To Match The Color Of Selected Laminate, Including All Necessary Fixing Arrangement, Nails, Glues, Screws, Magnetic Catchers, Handles, Handles Of Required Lengths As Per The Width Of The Drawer, Shutter, Cabinet, Soft Closing Hinges And Soft Closinginnotech Sliding Channel For Drawers Along With Railings If Required, Fixing The Furniture To The Wall Or To The Floor As Required. All Works Like Fixing The Unit To The Floor Or Wall, Laminates Of Specified Thickness Complete,Other Required Hardware Are Included. All Framework Intermittently For Support And Strength, All Details To Be Followed As Per The Drawings And Design Provided And Any Addition Required In Detail Should Be Incorporated In The Shop Drawing To Ensure Complete Functionality And Durability As Intended.All Plywood And Board Will Be Both Sides Laminte. Nothing Extra Will Be Paid. All Cooridnation Works Based On Civil Dimensions, Integration Of Various Appliances For The Purpose Of Electrical Wiring Are To Be Considered In This Item. Appliances Like Chimney,Sink Etc To Be Paid Seperatly. Natural Stone Counter Top Stone Will Be Provided By The Client And Fixing Will Be Done By The Client Appointed Agency. However Coordination Will Be The Responsibility Of This Contractor. Colour May Vary As Per Approval Of Engineer-In-Charge. , I) King Size Bed: The King-Size Bed Is Constructed Without A Storage Box And Features Robust Materials For Lasting Durability. The Frame, Including The Side Panels And Footboard, Is Made From 18 Mm Thick Pre-Laminated Engineered Wood With A Melamine Finish, Offering A Clean, Wood-Textured Look. The Mattress Base Is Fabricated Using 18 Mm Bwp-Grade Plywood, Fully Edge-Banded To Prevent Warping And Moisture Damage. The Overall Dimensions Of The Bed Are 2040 Mm In Length, 1980 Mm In Width, And 300 Mm In Height To The Base, Providing Ample Support For A Standard King-Size Mattress (1980 Mm × 1830 Mm). The Headboard Stands 800 Mm Tall And Is Divided Into Two Sections. The Lower Portion Is Made Of Laminated Board, While The Upper Section Includes A Cushioned Panel With 50 Mm Pu Foam, Upholstered In Stitched Premium Leatherette For Added Comfort And Aesthetics. The Entire Unit Features A Light Oak Melamine Finish To Match. The Bed Is Supplied In Knock-Down Condition With All Necessary Hardware, Including Cam Locks, Screws, Dowels, And Angle Brackets. Assembly Is Straightforward With Reinforced Metal Corners For Added Strength. , Ii) Side Table:The Side Table Is Constructed Using High-Grade Plywood And Finished In A Light Oak Melamine Laminate For A Clean, Natural Appearance. It Features A Compact Form With Overall Dimensions Of 400 Mm (Width) × 400 Mm (Depth) × 490 Mm (Height). The Unit Has Two Lockable Equally Sized Drawers, Both Equipped With Soft-Close Telescopic Channels For Smooth, Quiet Operation. The Design Incorporates A Handle-Less Front With A Finger-Pull Recess At The Top Edge Of Each Drawer For A Sleek And Minimalist Look. Both Drawers Are Lockable, Enhancing Functionality And Security For Personal Storage. The Surface Is Fully Laminated For Protection Against Wear And Easy Maintenance. , Iii) 06 Seater Dining Table— The Dining Table Shall Be Of Solid Sheesham Wood (Kiln-Dried And Chemically Treated) With Overall Dimensions 1500 Mm × 900 Mm × 760 Mm And A Tabletop Thickness Of Approx. 25 Mm; The Apron Shall Be 25 Mm Thick And Legs Shall Be 80–100 Mm Square In Section, All Joined Using Mortise-And-Tenon Or Equivalent Reinforced Joinery. A Clear Tempered (Toughened) Glass Top Shall Be Provided To Cover The Wooden Top: 10 Mm Clear Toughened Glass Is Recommended For This Size, With Machine-Polished Edges (Flat Polish Or Small Bevel) And Corner Radii For Safety. The Glass Shall Be Supplied Cut To Size For A Nominal 2–3 Mm Reveal From The Top Edge Of The Apron (Or As Directed), Packed Separately And Fitted On Site. Glass Fixing Shall Use Non-Marking Neoprene/Rubber Support Pads (Minimum 6 Pads Per Table) And Anti-Slip Silicone Adhesive/Dots To Hold The Glass In Place Without Damaging The Wood; Stainless Steel Decorative Clamps May Be Provided Where A Visible Fixing Is Required But Should Not Bear The Primary Load. Finish Of The Wood Shall Be A Low-Sheen Natural Polish Or Clear Lacquer; Table Shall Be Supplied Knock-Down With All Required Fasteners And Instructions For On-Site Assembly And Final Glass Placement. The Glass Top Protects The Wood From Scratches, Heat And Spills, Gives A Sleek Aesthetic, And Makes Cleaning Easier (Wipe With Standard Glass Cleaner While Avoiding Aggressive Solvents On Adjacent Wood Finish). Chairs 06 Nos — Each Chair Shall Be Of Solid Sheesham Wood, Finished To Match The Table’S Low-Sheen Polish, With A Slatted Backrest And Straight Legs. Seat Height Shall Be 450 Mm From Finished Floor Level. Seats Shall Be Cushioned With Medium-Density Foam And Fully Upholstered In Durable Synthetic Leather (Leatherette) In A Neutral Tone; Foam Shall Be Supported On A Plywood Board Beneath The Cushion. Chair Dimensions (Seat Width/Depth/Backrest Height) And Leg Sections Shall Be Robust To Match The Table And Shall Be Supplied Knock-Down With Necessary Assembly Hardware. Upholstery Shall Be Stain-Resistant And Maintainable (Spot Cleanable); Wood And Upholstery Care Instructions Shall Be Provided With Each Unit. , (Iv) Sofa Set , (A)Sofa Foyer One Seater Size In Mm - 880(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (B)Sofa Foyer Two Seater Size In Mm - 1460(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (C) Coffee Table The Coffee Table Measures 900 Mm (W) × 600 Mm (D) × 450 Mm (H) And Features A 10 Mm Thick Clear Tempered Glass Top And Shelf Supported On A Stainless Steel 202 Frame Made Of 40×40 Mm Square Tubes With A Mirror-Polished Finish. All Joints Are Argon-Welded, Ground, And Buffed For A Seamless Look. The Lower Glass Shelf For Additional Storage, And Rubber Pads Or Level Adjusters Are Provided At The Base For Stability And Floor Protection. The Table Combines Modern Design, Durability, And Elegant Finish, Making It Ideal For Offices And Reception Areas.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Arunachal Pradesh View Result →
39.
Housing Urban and Rular Development #9405091 Technical Bid
supply of Furniture And Internal Fit-Out At Jnv, Tirap, Arunachal Pradesh , School Building , (A) Classroom , (I) Classroom Desk Large Size Supply & Installation Big Desk (For Two Persons)-The Overall Dimensions Of Desk Will Be 1066Mmx 930Mm X Height 760Mm, Complete As Per Specifications Enclosed And Direction Of Engineer-In- Charge Having The Table Top Shall Be Made Up Of 18.0 Mm Thick Plywood Is 303 Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish). Table Top Dimensions Shall Be W 930 Mm X D 380 Mm. Edge Towards Bench Shall Be Post Formed With Round Edge. The Remaining Three Edges Must Be Sealed With 2Mmthick Pvc Edge Banding Tape. Edge Band Must Be Trimmed On Edges And Corners. The Desk Shall Be Have Low Chemical Emission Of Vocs (Voltage Organic Compounds) And Carcinogens, Contributing To A Healthier Room Environment. Seat And Back Rest Shall Be Made Of 18Mm Thick Plywood Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish) Except Back Rest. Back Rest Shall Be Have Both Sides Colour Lamination. Technical Details Of Seat And Back Rest Are Mentioned Below:Seating Bench Dimensions Shall L 930 Mm X W 300 Mm X H 450 Mm. Front Side Shall Be Rounded With Post Forming. Remaining Three Edges Shall Sealed With 2Mm Thick Pvc Edge Banding Tape. Back Rest Dimensions Shall L 930 X H 200 Mm Upper Side Shall Be Rounded With Post Forming Remaining Three Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding Tape. Desk Shelve Shall Be Made Of Prime Quality 0.8Mm Thick Crca Sheet Of H150mmxd300mm And Side Stiffeners Of Crca Tube Size 19Mmx19mmx1mmthick. One Vertical Support (Partition) Of Square Tube Size 25Mm Square X1.2Mm Thick Must Be Provided At Centre Of Tray . Upper Modesty Made Of Prime Quality 0.8Mm Thick Crca Sheet Powder Coated Should Be Embossed With Dimples In Round Shape, Height Will Be 150Mm, There Should Be Perforated Lower Modesty Made Of Prime Quality 0.8 Mm Thick Crca Sheet Of Size H150mmxd21mm With Square Perforation, Crca Tube Of Size 19X19x1mm Thick To Be Inserted For Full Length At Bottom Of Jali . Bag Hook Should Be Provide On Both Side Of Piller Made Of Minimum 4Mm Dia Rod Side Frame Structure:- Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25Mmx50mmx1.2Mm Thick Crca Tube , Seat And Back Side Frame Structure Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25.4Mm Diameter X 1.6Mm Thick Erw-1Pipe , There Will Be 8No. Horizontal Supports Are 25Mmx25mmx1.2Mm Thick Crca Pipes. . Bottom Rectangular Tube 50X25x 1.2Mm Thick Should Be Closed With Ppcp Cap Bothside Sand Pipe Dia. 25.4X1.6Mm Thick Should Be Closed With Metal (Backside) And Other Side (Undertheseat) Ppcp Cap, Complete As Per Engineer Incharge Desk Should Be In Semi Knock Down Form With The Help 16 Connecting Pipes ; 8 Pipes On Each Side : Connecting Pipe Size Will Be 20X20x1.2Mm .All Metal Pieces Shall Be Welded Properly Strongly And Conformity With Regulations With Co2 Welding Shall Be Used , Crca Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form A Layer Of Base Coating Of (Iron Phosphating) (0.4 – 0.8) Gm/M² , Automatic Spray Coating Shall Be Applied To Be Followed By A Drying Process In A Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 Tank Treatment With Minimum 45-50 Micron Powder Coating. , (Ii) Classroom Desk Medium Size Supply & Installation Medium Desk (For Two Persons)-The Overall Dimensions Of Desk Will Be 900Mm X 890Mm X Height 690Mm, Complete As Per Specifications Enclosed And Direction Of Engineer-In- Charge Having The Table Top Shall Be Made Up Of 18.0 Mm Thick Plywood Is 303 Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish). Table Top Dimensions Shall Be W 890 Mm X D 380 Mm. Edge Towards Bench Shall Be Post Formed With Round Edge. The Remaining Three Edges Must Be Sealed With 2Mmthick Pvc Edge Banding Tape. Edge Band Must Be Trimmed On Edges And Corners.The Desk Shall Be Have Low Chemical Emission Of Vocs (Voltage Organic Compounds) And Carcinogens, Contributing To A Healthier Room Environment. Seat And Back Rest Shall Be Made Of 18Mm Thick Plywood Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish) Except Back Rest. Back Rest Shall Be Have Both Sides Colour Lamination. Technical Details Of Seat And Back Rest Are Mentioned Below:Seating Bench Dimensions Shall L 890 Mm X W 300 Mm X H 400 Mm. Front Side Shall Be Rounded With Post Forming. Remaining Three Edges Shall Sealed With 2Mm Thick Pvc Edge Banding Tape. Back Rest Dimensions Shall L 890 X H 200 Mm Upper Side Shall Be Rounded With Post Forming Remaining Three Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding Tape. Desk Shelve Shall Be Made Of Prime Quality 0.8Mm Thick Crca Sheet Of H150mmxd300mm And Side Stiffeners Of Ss Crca Tube Size 19Mmx19mmx1mmthick. One Vertical Support (Partition) Of Square Tube Size 25Mm Square X1.2Mm Thick Must Be Provided At Centre Of Tray . Upper Moedsty Made Of Prime Quality 0.8Mm Thick Crca Sheet Powder Coated Should Be Embossed With Dimples In Round Shape, Height Will Be 150Mm, There Should Be Perforated Lower Modesty Made Of Prime Quality 0.8 Mm Thick Crca Sheet Of Size H150mmxd21mm With Square Perforation, Crcat Ube Of Size 19X19x1mm Thick To Be Inserted For Full Length At Bottom Of Jali . Bag Hook Should Be Provide On Both Side Of Piller Made Of Minimum 4Mm Dia Rod Side Frame Structure:- Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25Mmx50mmx1.2Mm Thick Crca Tube , Seat And Back Side Frame Structure Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25.4Mm Diameter X 1.6Mm Thick Erw-1Pipe , There Will Be 8No. Horizontal Supports Are 25Mmx25mmx1.2Mm Thick Crca Pipes. . Bottom Rectangular Tube 50X25x 1.2Mm Thick Should Be Closed With Ppcp Cap Bothside Sand Pipe Dia. 25.4X1.6Mm Thick Should Be Closed With Metal (Backside) And Other Side (Undertheseat) Ppcp Cap, Complete As Per Engineer Incharge Desk Should Be In Semi Knock Down Form With The Help 16 Connecting Pipes ; 8 Pipes On Each Side : Connecting Pipe Size Will Be 20X20x1.2Mm .All Metal Pieces Shall Be Welded Properly Strongly And Conformity With Regulations With Co2 Welding Shall Be Used , Crca Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form A Layer Of Base Coating Of (Iron Phosphating) (0.4 – 0.8) Gm/M² , Automatic Spray Coating Shall Be Applied To Be Followed By A Drying Process In A Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 Tank Treatment With Minimum 45-50 Micron Powder Coating. , (Iii)Teacher Table :Supplying And Installation Of Knock Down Type Office Table Made Of Pre-Laminated Mdf Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Top Of Size 1200 X 600 X 750 Mm. Worktop Shall Be Rounded In All Four Corners And Should Have An Overhung Of 50Mm Alongwith One Drawer Unit Made Of 0.5Mm Thick Crca Steel Sheet. The Table Top Shall Be Supported Over Legs Consists Of 4 Powdered Coated Ms Legs With Connected Beams With Pipe Size 25X25x1.2 Mm Thick. , (Iv)Teachers Chair, Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (V) Teacher Board [Excluding Cost Of Interactive Flat-Panel Display (Ifpd)] Technical Specification For Smart Board With Double-Track Sliding System For Green And White Boards Fitted In An Anodised Aluminium Frame With Concealed Cable Management And Provision For Mounting Of Digital Screen: Supply, Installation, Testing, Commissioning (Sitc) Of An Integrated Digital Teaching–Learning Solution Comprising: (A) Anodised Aluminium Frame, Double Track Sliding System For White & Green Board And Provision For Mounting Of Digital Screen With Concealed Cable Management, (B) Vitrified Magnetic Ceramic-Steel Green Board And White Board Panels. • Dimensions And Configuration: Total Width Of The Setup Is ~12 Feet And Height ~4.0 Feet From The Board Surface (Excluding The Width Of Aluminium Frame). • Material: Providing And Fixing Anodised Aluminium (Alloy 6063-T6) Framed Sliding System For Smart Board With Minimum 2.0 Mm Thick Extruded Sections, Anodised To Aa15 Grade As Per Is 1868, Mounted On A Heavy-Duty Top-Hung Aluminium Track (Min. 2.5 Mm Thick) With Sealed Ball-Bearing Nylon/Pu Rollers (Load Capacity Not Less Than 120 Kg Per Panel), Concealed Bottom Guide, Epdm Gaskets, Ss-304 Fasteners, Pelmet/Valance Cover, And Soft End-Stops/Soft-Close Mechanism, Including All Brackets, Fixings, Alignment, Cable Provisions, Commissioning, And Making Good Complete As Per Drawings And Engineer-In-Charge. • Design: One Slot To Fix Ifpd, Other Slot For Green & White Boards Sliding On Double Track System With Locking Facility On Sliding Frame To Keep The Ifpd Display Safe. • Top & Bottom Rails: Tracks Shall Be Aligned And Reinforced To Ensure Boards Move Easily And Without Wobble. • Back Side: The Backside Of The Smart Board, To Concealed The Wall Surface, Provided & Fixed With 18 Mm Thick Hdhmr Board Laminated (White Coloured Matte Finish) With 0.8 Mm, Edges Sealed With 1 Mm Pvc Edge Banding, Fixed To The Anodised Aluminium Frame With Concealed Screws/Rivets, With Ventilation Slots As Required, And Shall Be Moisture, Termite And Borer Resistant. • Load Capacity: Safe To Hold Ifpd + White & Green Boards With =1.5× Safety Factor. • Cable Management: Built-In Channels For Power, Lan, Hdmi, Usb. • Safety: Rounded Edges, Tamper-Resistant Covers, Concealed Fixing. • Finish: Durable, Corrosion-Resistant Coating Suitable For Indoor Use. • Additional Requirements:(A) All Boards And The Structure Must Be Securely Fixed To The Wall With Appropriate Fasteners. (B) Provision For Cable Management Must Be Included For The Ifpd (I.E., Concealed Conduit/Path For Power And Data Cables). , (C) The Unit Must Be Free From Sharp Edges, Splinters, Or Any Protruding Parts That Could Cause Injury. (D) Installation Height Should Ensure Comfortable Writing Access For Average Adult And Student Height (Typically Bottom Edge ~2.5 To 3 Feet From The Floor). (B) Vitrified Magnetic Ceramic-Steel Green Board And White Board Panels: • Function: Boards Shall Slide Horizontally On A Top And Bottom Aluminium/Steel Channel Track To Fully Cover Or Reveal The Ifp As Needed. • Material: Vitrified Ceramic-Steel, Magnetic, Double-Coated. • Sliding Boards: Quantity: 1 No. Green Board & 1 No. White Board. • Green Board Surface: Matte, Chalk-Friendly, Stain/Scratch Resistant. • White Board Surface: Glossy Surface, Dry-Erase Marker Friendly, Ghost-Free, Easy Clean. • Size: ~6 Feet (W) × 4 Feet (H) (Each Board) With Thickness 8Mm. • Frame: Anodised Aluminium, Rounded Edges, Concealed Fasteners.Note - Dimensions Mentioned Are Indicative. Actual May Vary As Per Site Requirements , (B) Principal And Vice-Principal Room , Table: Supplying And Installation Of Site Knock Down Type Office Table As Per Approved Design And Directrion Of Engineer-In-Charge. Worktop-Worktopshallbemade25mmthickpre-Laminatedmdfboardwithdecorativelaminationononesideandbalancing Lamination On Other Side Confirming To Is 12406:2003 With Post Forming On Front,Back Andmachine Pressedpvc Egde Banding 2Mm Thick Glued With Industrial Adhesive And Diffused With Board Monolithically On Other Two Sides. Table Top Shall Have 75Mm Overhung On Front And 25Mm Overhung On Sides. Understructure- C-Type Leg Shall Be Made Of Tubular Section Of 50Mm X 50Mm X 1.6Mm (Wall Thickness) Thick Vertical Member And40mm X40mmx1.6Mm(Wall Thickness) Horizontal M.S.Pipe Confirming Is-Grade 4932Shall Be Finished With Epoxy Polyster Powder Coated Dft50-60Micron.Thelegsshallbefittedtothegroundwithm8screwlevelerwiththeheightadjustmentupto15mm.Thecross Membersshallbemountedbyendbracketsmadeof3mmthickcrcasteelsheetconfirmingis513:2008 Andfinishedwithepoxy Polyster Powder Coated Dft 50-60 Micron Confirming Is 13871:1993. Wiremanagement-Electricalwiresshallbecarriedfromhorizintal/Verticalduct Madeof0.7Mmcrca Steelsheet Confirmingtois 513:2008. The Switch Plate Or Grommet Depending Upon Requirement Shall Also Be Provided For Electrical/Lan Connection On Table Top. Modesty Panel -Modesty Panel Of Height 450Mm Shall Be Made Of 1.5Mm Thick Crca Sheet Sheet Confirming To Is 513: 2008And Shall Be Finised With Epoxy Polyster Powder Coated Dft 50-60Micron. Storage Body- Storage Top Shall Also Be Made Of 25Mm Thick Pre-Lam Mdf Board Confirming To Is 12406:2003 With Post Forming On Two Sides And Machine Pressed Pvc Egde Banding 2 Mm Thick Glued With Industrial Adhesive And Diffused With Board Monolithically On Other Two Sides. The Body Of Storage Unitsshall Be Made Of 0.8Mm Thick Crca Steel Sheet And Skirting Shall Be Of 1.2Mm Thick Crca Steel Sheet Confirming To Is 513: 2008 Finished With Epoxy Powder Coated Of Dft 50-60 Micron Confirming Is 13871:1993. Internal Shelves Shall Be Also Made Up Of 0.8Mm Crca Steel Sheet Confirming To Is 513: 2008 And Shall Be Mounted With The Metal Shelf Support Pin Made Of 2Mm Thick Crca Steel Sheet With Nickel Or Chrome Plating.M10 Screw Leveler Is Given With Height Adjustment Up To 12Mm To 15Mm. , (I) Principal Room Table Table Of Size 1800Mm (W) X 900Mm (D) X 750Mm (H) With Side Storage Of Size 900Mm (W) X 450Mm (W) X 750Mm (H) And Back Storage 1800Mm (W) X 450Mm (D) X 750Mm (H) As Per Specifications Above , (Ii) Vice-Principal Room Table Table Of Size 1650Mm (W) X 900Mm (D) X 750Mm (H) With Side Storage Of Size 900Mm (W) X 450Mm (W) X 750Mm (H) And Back Storage1650 Mm (W) X 450Mm (D) X 750Mm (H) As Per Specifications Above. , (Iii) Principal Room Chair High Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1210H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat,Used Pu Moulded Foam On Seat Of D-45 Kg/M3 , Back Ofchair Is Made Of Injection Moulded Pp Material Structure Upholstered With Mesh Fabric , Adjustable Lumber Support Upholstered With Fabric , Adjustable Headrest On Back Upholstered With Mesh Fabric ,Seat Size:- 470W ±10 X 460D ±10 X 70Thick. ±5 Mm , Back Size:500W±10X780h±10,Mechanism:-Thesynchrotiltmechanism,Usedgasliftof90mmsizeofclass-Ivgrade,Armrest:-Pu Paddedadjustable Armrestfixedwith Seat ,Chair Base & Wheels: Ss 202 Polished Finish Plated Base Consists Of5 Prongs With 640±5Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , (Iv) Principal Roomvisitor Chair, Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (V) Vice-Principal Room Chair High Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1210H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat,Used Pu Moulded Foam On Seat Of D-45 Kg/M3 , Back Ofchair Is Made Of Injection Moulded Pp Material Structure Upholstered With Mesh Fabric , Adjustable Lumber Support Upholstered With Fabric , Adjustable Headrest On Back Upholstered With Mesh Fabric ,Seat Size:- 470W ±10 X 460D ±10 X 70Thick. ±5 Mm , Back Size:500W±10X780h±10,Mechanism:-Thesynchrotiltmechanism,Usedgasliftof90mmsizeofclass-Ivgrade, Armrest:-Pu Paddedadjustable Armrestfixedwith Seat ,Chair Base & Wheels: Ss 202 Polished Finish Base Consists Of5 Prongs With 640±5Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , (Vi) Vice Principal Visitor Chair: Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (C) Sofa Set , (I)Sofa Foyer One Seater Size In Mm - 880(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (Ii)Sofa Foyer Two Seater Size In Mm - 1460(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (Iii)Sofa Foyer Three Seater Size In Mm - 1930(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (Iv) Coffee Table The Coffee Table Measures 900 Mm (W) × 600 Mm (D) × 450 Mm (H) And Features A 10 Mm Thick Clear Tempered Glass Top And Shelf Supported On A Stainless Steel 202 Frame Made Of 40×40 Mm Square Tubes With A Mirror-Polished Finish. All Joints Are Argon-Welded, Ground, And Buffed For A Seamless Look. The Lower Glass Shelf For Additional Storage, And Rubber Pads Or Level Adjusters Are Provided At The Base For Stability And Floor Protection. The Table Combines Modern Design, Durability, And Elegant Finish, Making It Ideal For Offices And Reception Areas. , (D) Staffroom , (I) Table (Seating Capacity As Per Actual Requirement) Supplying And Installation Of A Modular, Knock-Down Center Island Table Sized Approximately 3600 Mm In Length (Adjustable To Actual Requirements) By 1350 Mm In Width And 750 Mm In Height, Constructed From High-Quality 25 Mm Thick Commercial Grade Plywood Or Bwr (Boiling Water Resistant) Grade Plywood With Decorative Lamination On Visible Faces And Balanced Lamination Beneath For Enhanced Strength And Moisture Resistance. All Edges Are Sealed With 2 Mm Thick Machine-Pressed Pvc Edge Banding Bonded With Industrial Adhesive To Ensure A Seamless, Monolithic Appearance. The Gable Ends Are Fabricated Of The Same 25 Mm Thick Commercial Grade Plywood With Decorative Lamination On Both Sides And Matching Edge Banding For Consistent Aesthetics And Superior Durability.Modesty 18Mm Matching Laminate. The Table Shall Have An Underbody Vertical Support Panel Running Continuously Along Its Length To Enhance Stability And Strength.The Understructure Uses Precision-Cut, Laminated Plywood Panels Assembled With Knock-Down Fittings For Ease Of Installation And Future Reconfiguration, Ensuring Superior Load-Bearing Capacity And Long-Term Durability. A Concealed Wire Management System Beneath The Worktop Integrates Pre-Laminated Plywood Cable Trays Or High-Quality Plastic Trays Fixed With Durable Brackets, Complete With Provisions For Switch Plates And Grommets To Facilitate Safe, Organized Routing Of Electrical And Data Cables. All Surfaces Are Finished For Scratch And Stain Resistance With Anti-Fungal And Moisture-Resistant Properties, And Installation Will Follow Best Woodworking Practices, With Final Dimensions And Seating Capacity Determined By The Actual Site Layout. , (Ii) Work Space With In-Built Lockable Overhead Storage Space For Staffroom (As Per Actual Requirement) Supplying And Installation Of Site Knock-Down Type Modular Wall-Mounted Workspace Unit Of Approximate Size 900W X 600D X 750H Mm (For One Staff), Including Working Counter And Lockable Overhead Storage Cabinet Of 900W X 450D X 650H Mm. The Structure Shall Be Made Of 18 Mm Thick Bwp Grade Plywood With Decorative Laminate On External Surfaces And Balancing Laminate On Inner Faces Conforming To Is:303/Is:12406. All Exposed Edges Shall Be Sealed With 2 Mm Pvc Edge Banding. The Worktop Shall Be 25 Mm Thick Laminated Plywood Board With Post-Formed Front Edge And Machine-Pressed Pvc Edge Banding, Securely Fixed To The Wall Using Concealed Ms Cleats And Brackets. The Overhead Cabinet Shall Be Fitted With Soft-Close Concealed Hinges, Ss Handles, And Magnetic Catchers Of Approved Make, With One Adjustable Shelf And Modular Connectors For Alignment And Expansion To Adjoining Units. Each Workspace Shall Include Provision For Electrical Connectivity With 6A/16A Modular Sockets (As Per Requirement) Positioned At Approximately 450 Mm Above Finished Floor Level For Easy Access. The Worktop Shall Have A Circular Cable Hole (50–60 Mm Diameter) With Grommet For Laptop And Equipment Wiring. All Wiring, Sockets, And Conduits Shall Be Concealed Neatly Within The Table Body, Routed Through Internal Pvc Raceways To Maintain A Clean, Clutter-Free Appearance. Junction Boxes And Ducts Shall Be Integrated To Provide Safe, Organized Cable Management Without Visible Wiring. The Entire Unit Shall Be Wall-Mounted Using Heavy-Duty Ms Brackets Or Suitable Fasteners Based On Wall Type, Finished Neatly With Matching Silicone Sealant At All Joints. All Fittings And Hardware, Including Soft-Close Hinges And Handles, Shall Be Of Reputed Make. The Unit Shall Be Termite-Resistant, Moisture-Resistant, Easy To Maintain, And Made From Isi-Marked Prime Quality Boards. The Overall Layout And Detailing Shall Match The Approved Reference Image, With Actual Dimensions Finalized As Per Site Requirements And Direction Of The Engineer-In-Charge. , (Iii) Chair Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (Iv) Personal Locker Unit For Staffroom And One Each For Principal And Vice Principal Room Supplying And Installation Of Metal Lockers With Cam Lock One Unit Consiting Of 380Mm (W) X 450Mm (D) X 1800 Mm (H) With 4 Lockers. Body-Lh And Rh Side And Back Panel Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008. Shelf Hanging Bracket Is Welded On Both The Side Panel By Spot Welding. Shelf Hanging Bracket Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008. Front Frame, Top And Bottom Part Made Up 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008 And Horizontal Part Is Made Up 0.8 Mm Thick Crca Steel Sheet Confirming To Is 513:2008. On A Front Frame Horizontally Provision Is Given At A Common Distance To Hold Shutter Bracket. Locker’S Top Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming Is 513:2008 Which Is Having Standard Dimension 375 X378mm. Shelf Is Also Made Up Of 0.8 Mm Crca Steel Sheet Confirming To Is 513:2008. Shutter- Is Made Up On 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008. All The Shutter Are Hung On Shutter Pin And Shutter Bracket, Louvers Are Given In Shutter For Air Flow. Pvc Flush Handle And Name Plate Is Used For Handling And For Name Plate Tagging. Standard Locking Arrangment Is Used For Locking Each Shutter. The Bodies Including Shelves Are Given Anti-Rust Surface Treatment & Are Powder Coated With Epoxy Polyester Powder Coating Of Dft 50- 60 Micron Confirimg To Is 13871:1993. , (E)Library , (I) Supply And Installation Of Glass-Door Storage Of Size 915 Mm (W) X 482Mm (D) X 1980Mm (H). It Should Have Shelf Thickness Of 0.8Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) With Clear Glass Of > 4.0 Mm Thick And All Other Components Shall Have A Thickness Of 0.8Mm. These Components Shall Be Made Of Crca Steel Sheet ‘D’ Grade High Yield Strength As Per Is 513:2008 The Glass Door Storwel Shall Have A Ss Handle And A Two-Way Locking Mechanism With Shooting Bolt. It Should Have A Height-Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base.All Metal Components Would Be Epoxy Polyster Powder Coated Dft 50-60 Micron Confirimg To Is 13871:1993. , (Ii) Wall Mounted Built In Open Book Shelf : Overall Size 900L (Length May Vary As Per Actual Requirement) X300dx2100hmm,Top Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Banding ,Side Panel Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending , Skirting Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending ,Back Panel Made Up Of 18Mm Thick Postlam Plywood , One Number Of Bottom Storage Cabinets Alongwith The Complete Length Of Heght 600Mm As Per Ref. Image ,Shelf Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending, All Wooden Panels Fix Joints With Minifix Dowels & Other Fitting Equipment , All Wooden Panels Prime Quality Board With Isi Marked. Complete Structure Design Should Be As Per Reference Image. , (Iii) Table (Seating Capacity As Per Actual Requirement) Supplying And Installation Of A Modular, Knock-Down Center Island Table Sized Approximately 3600 Mm In Length (Adjustable To Actual Requirements) By 1350 Mm In Width And 750 Mm In Height, Constructed From High-Quality 25 Mm Thick Commercial Grade Plywood Or Bwr (Boiling Water Resistant) Grade Plywood With Decorative Lamination On Visible Faces And Balanced Lamination Beneath For Enhanced Strength And Moisture Resistance. All Edges Are Sealed With 2 Mm Thick Machine-Pressed Pvc Edge Banding Bonded With Industrial Adhesive To Ensure A Seamless, Monolithic Appearance. The Gable Ends Are Fabricated Of The Same 25 Mm Thick Commercial Grade Plywood With Decorative Lamination On Both Sides And Matching Edge Banding For Consistent Aesthetics And Superior Durability.Modesty 18Mm Matching Laminate. The Table Shall Have An Underbody Vertical Support Panel Running Continuously Along Its Length To Enhance Stability And Strength.The Understructure Uses Precision-Cut, Laminated Plywood Panels Assembled With Knock-Down Fittings For Ease Of Installation And Future Reconfiguration, Ensuring Superior Load-Bearing Capacity And Long-Term Durability. A Concealed Wire Management System Beneath The Worktop Integrates Pre-Laminated Plywood Cable Trays Or High-Quality Plastic Trays Fixed With Durable Brackets, Complete With Provisions For Switch Plates And Grommets To Facilitate Safe, Organized Routing Of Electrical And Data Cables. All Surfaces Are Finished For Scratch And Stain Resistance With Anti-Fungal And Moisture-Resistant Properties, And Installation Will Follow Best Woodworking Practices, With Final Dimensions And Seating Capacity Determined By The Actual Site Layout. , (Iv)Chair, Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (F) Computer Lab , (I) Computer Work Station Supplying And Installation Of Knock Down Type Dual Computer Work Station Of Unit Size 1500Mm (Length, Actual Length May Vary As Per Actual Site Requirement) X 600M (W) X 750Mm (H) For Two Students Work Top- Work Top Shall Be Made 25Mm Thick Laminated Plywood With Decorative Lamination On One Side And Balancing Lamination On Othersideconfirmingtois12823:1990With2mmthickmachinepressedpvcedgebandinggluedwithindustrialadhesiveand Monolithically Diffused With Board On All Sides. Understructure Supporting Frame Consist Oflaminated Plywood Gable Ends Of 18Mm Wire Management-The Vertical /Electrical Duct & Horizontal Cabletray ( Wire Carriers) Aremadeof Crca Steel Sheet & Fixed To The Understructure Below Worktop With Specially Designedbrackets. Provision For Fixing Switch Platesare Prividedin The Cable Tray For Easy Access Through Wire Mangaer Or Pvc Grommet. , (Ii) Computer Chair For Student Medium Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1010H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat ,Used Pu Moulded Foam On Seat Ofd-45 Kg/M3 , Back Of Chair Is Made Of Injection Moulded Pp Material Structure Combination Of Upholstered With Mesh Fabric , Seat And Back Connected Through Metal Powder Coated Plate Having Adjustable Lumber Support Upholstered With Fabric , Seat Size:- 490W ±10 X 450D ±10 X 70Thick. ±5 Mm , Back Size: 525W ±10 X640h ±10,Mechanism:- The Synchro Tilt Mechanism ,Using Gaslift Of 90 Mm Size Of Class 3 Grade,Armrest: Pu Padded Adjustable Armrest,Chair Base & Wheels: Revolving Pedestal Ss 202 Polsihed Finish Base Consists Of 5 Prongs With 640±5 Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , (G) Laboratories , (I) Supply And Installation Of Glass-Door Storage Of Size 915 Mm (W) X 482Mm (D) X 1980Mm (H). It Should Have Shelf Thickness Of 0.8Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) With Clear Glass Of > 4.0 Mm Thick And All Other Components Shall Have A Thickness Of 0.8Mm. These Components Shall Be Made Of Crca Steel Sheet ‘D’ Grade High Yield Strength As Per Is 513:2008 The Glass Door Storwel Shall Have A Ss Handle And A Two-Way Locking Mechanism With Shooting Bolt. It Should Have A Height-Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base.All Metal Components Would Be Epoxy Polyster Powder Coated Dft 50-60 Micron Confirimg To Is 13871:1993. , (I) Physics Lab , Along The Wall Table:: Supply And Installation Of Along-The-Wall Knock Down Type Modular Laboratory Tables Of Size 1400 Mm(L) (Length May Vary As Per Actual Requirement) × 750 Mm (W) × 900Mm H . Above The Counter, With An Internal Conduit For All Wiring. Modular Switch Plates And 02 Nos Of 220V/16A Switch Socket (With Individual Circuit Protection) Will Be Cnc-Mounted Every 1 M (Or Per Site Layout). All Conduits And Components Shall Comply With Applicable Laboratory Safety And Performance Standards. Dust-Proof, Removable Access Covers To Permit Maintenance And Future Upgrades, And Outlets To Be Ergonomically Positioned For Seated And Standing Use. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Crca With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg). The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , Island Table:The Laboratory Table Shall Be Provided As Knock Down Type Modular Island Laboratory Tables Units Of Overall Size 8000(L) (Length May Vary As Per Actual Requirement) × 1500(W) × 900H . It Shall Be Constructed In Modular Segments Of 1400(L) × 1500(W) × 860(H) Mm Each For Ease Of Manufacture, Handling, And Installation. The Worktops Will Include A Powder-Coated Bus Running Their Full Length, Above The Counter, With An Internal Conduit For All Wiring. Modular Switch Plates And 04 Nos (02 Facing Each Side) Of 220V/16A Switch Socket (With Individual Circuit Protection) Will Be Cnc-Mounted Every 1 M (Or Per Site Layout). All Conduits And Components Shall Comply With Applicable Laboratory Safety And Performance Standards. Dust-Proof, Removable Access Covers To Permit Maintenance And Future Upgrades, And Outlets To Be Ergonomically Positioned For Seated And Standing Use. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Crca With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg). The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , (Ii) Chemisty Lab , Along The Wall Table: Supply And Installation Of Along-The-Wall Knock Down Type Modular Laboratory Tables Of Size 1400(L) (Length May Vary As Per Actual Requirement) × 750(W) × 900(H) Mm × 1550H (Two-Tier). Four Standard Ss304 Sinks Shall Be Installed, Each Fitted With A 3-Way Ss 304 Faucet Of Premium Make. Reagent Racks Made Completely Out Of Stainless Steel Shall Be Provided To Cover The Entire Table Length(Along The Wall) Except The Sink Area. These Racks Shall Be 300D × 700H And Of Complete Modular Design, Consisting Of Two Horizontal Storage Shelves Made Of Stainless Steel With Suitable Cutouts For Electrical Switches And Sockets. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Stainless Steel Sheet Polished Finish. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Ss Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Stainless Steel Sheet With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg). Reagent Shelves Shall Be Made Of A Ss 304, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , Island Table: The Laboratory Table Shall Be Provided As Knock Down Type Modular Island Laboratory Tables Units Of Overall Size 8000(L) (Length May Vary As Per Actual Requirement) × 1500(W) ×900(H) Mm × 1550H (Two-Tier). It Shall Be Constructed In Modular Segments Of 1600(L) × 1500(W) × 860(H) Mm Each For Ease Of Manufacture, Handling, And Installation. Four Standard Ss304 Sinks Shall Be Installed, Each Fitted With A 3-Way Ss 304 Faucet Of Premier Make. Stainless Steel 304 Reagent Racks Shall Be Provided Across The Entire Table Length In Centre Except The Sink Areas, With Dimensions 300D × 700H. These Racks Shall Also Be Of Modular Design With Two Horizontal Stainless Steel Shelves, Cutouts For Switches And Sockets, Provision For Electrical Outlets, And Accommodation For Granite Pieces. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Ss Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Powder Coated Crca With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg). Reagent Shelves Shall Be Made Of A Polished Finish Ss, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , (Iii) Biology Lab Table , Along The Wall Table: Supply And Installation Of Along-The-Wall Knock Down Type Modular Laboratory Tables Of Size 1400(L) (Length May Vary As Per Actual Requirement) × 750(W) × 900(H) Mm × 1550H (Two-Tier). Four Standard Ss304 Sinks Shall Be Installed, Each Fitted With A 3-Way Ss 304 Faucet Of Premium Make. Reagent Racks Made Completely Out Of Stainless Steel Shall Be Provided To Cover The Entire Table Length(Along The Wall) Except The Sink Area. These Racks Shall Be 300D × 700H And Of Complete Modular Design, Consisting Of Two Horizontal Storage Shelves Made Of Stainless Steel With Suitable Cutouts For Electrical Switches And Sockets. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Stainless Steel Sheet Polished Finish. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Ss Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Stainless Steel Sheet With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg).. Reagent Shelves Shall Be Made Of A Ss, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , Island Table: The Laboratory Table Shall Be Provided As Knock Down Type Modular Island Laboratory Tables Units Of Overall Size 8000(L) (Length May Vary As Per Actual Requirement) × 1500(W) × 900(H) Mm × 1550H (Two-Tier). It Shall Be Constructed In Modular Segments Of 1400(L) × 1500(W) × 900(H) Mm Each For Ease Of Manufacture, Handling, And Installation. Four Standard Ss304 Sinks Shall Be Installed, Each Fitted With A 3-Way Ss 304 Faucet Of Premium Make. Stainless Steel Reagent Racks Shall Be Provided Across The Entire Table Length In Centre Except The Sink Areas, With Dimensions 300D × 700H. These Racks Shall Also Be Of Modular Design With Two Horizontal Stainless Steel Shelves, Cutouts For Switches And Sockets, Provision For Electrical Outlets, And Accommodation For Granite Pieces. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Crca With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg).. Reagent Shelves Shall Be Made Of Polished Finish Ss, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , (Iv) Lab Stool Supply And Installation Of Lab Stool Seat Revolving Stool With Backrest Overall Dimension: 410W ±10 X 410D ±10 X 820H ±10 Mm,Seat Ofchairismadeof12mmthickhotpressedplywoodpastedwithhighdensity Pufoam&Leatherette Upholstery,Back Ismade Of 12Mmthickhotpressedplywoodpastedwithpufoamd-40Kg/M3,H-20Seatandbackfixedthroughmetal Powdercoatedspine Covered With Plastic Cover, Seat Size: 400W ±10X 400D ±10 X 75Thick. ±5 Mm, Back Size: 450W ±10 X 240H ±10 X 50Thick. ±5Mm, Ground To Seat Height-440-560Mm, Mechanism:- Machanism Design With Features Of Revolving At 360 Degree.Machanism Provided Upright Position Locking,Seating Height Can Be Adjusted With A Pneumatic Gas Lift,Gaslift: Lift -Used Gaslift Of 90 Mm Size Of Class- Iv Grade With Plastic Bellow Cover, Chair Base & Wheels: Chair Basemade Of Polished Finished Ss 202 Grade Stainless Steel, Base Consists Of Polished Finished Ss 202 Grade Stainless Steel 5 Prongs With 560±5 Mm Pitch Circle Diameter, Polished Finished Ss 202 Grade Stainless Steel Circular Foot Rest As Per Ref. Image, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor. , Kitchen & Dining , (A) Dining Table Dining Table: Polished Finish Ss Dinning Table Consists Of Dinning Top Is Made Up Of 1 Mm Thickness Stainless Steel Sheet Of Ss 304 Grade With Overall Dimension Of 1800(L) X 700(D) X 750(H). The Table Top Is Reinforced With A 18 Mm Ply Board On Stainless Steel Frame Of Square Section 40Mmx40mmx1.6Mm. Dinning Top Of Stainless Steel Sheet Shall Be Extended To The Sides And A Depth Upto 40 Mm Under The Table Top In All Directions Includingedge Rounding, Grinding And Finishing Etc. All Complete. The Table Top Shall Finish In Such A Manner To Avoid Any Sharp Edges. The Table Will Be Supported By Four Hollow Legs Made From Ss 304 Grade Stainless Steel. The Hollow Legs Shall Be Of Square Type Of Size50mmx50mmx1.6Mm.Theselegsshallbesecurelyweldedormechanicallyfastenedtotheundersideofthetabletopframe.For Additional Structural Stability, Stainless Steel Cross Supports Shall Be Provided Between The Legs As Shown In Figure With 40Mmx40mmx1.6Mm Ss Square Section. The Table Shall Include Rubber Shoes At The Bottom Of Each Leg To Prevent Floor Damage And Ensure Stability. The Design Shall Prioritize User Safety With No Sharp Corners Or Edges. The Table Must Be Structurally Sound And Capable Of Supportingauniformlydistributedloadofatleast250kg.Allmaterialsusedmustconformtorelevantisstandards,Andthefinished Product Should Be Free From Burrs, Dents, Or Deformities. Ss 304. , (B) Dining Bench Dining Bench: The Bench Shall Be Of Size 1800 Mm In Length, 300 Mm In Depth, And 450 Mm In Height, Suitable For Use In Residential Schools. The Bench Top Shall Be Made Of 18 Mm Thick Hdhmr + Laminated , Finished With A 1 Mm Thick Decorative Laminate On The Topsurface, Anda Balancing Laminatebacking On The Underside Toensure Dimensional Stability. All Exposed Edges Shall Be Sealed With Pvc Edge Banding Or Machine-Finished To Prevent Splinters And Enhance Durability. The Plywood Shall Be Scratch-Resistant, Water-Resistant, Andeasytoclean,Withalightwoodgrainorequivalentfinishasapproved.Thesupportingframeshallbefabricatedframeofsquare Hollow Section40mmx40mmx1.6Mmss 304 Grade Stainless Steel In Polished Finish.Theselegsshallbesecurelyweldedtothe Undersideofthebenchtopframe.Thebenchshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability.Thedesignshallprioritizeusersafetywithnosharpcornersoredges.Thebenchmustbestructurallysoundandcapableof Supportingauniformlydistributedloadofatleast250kg.Allmaterialsusedmustconformtorelevantisstandards,Andthefinished Product Should Be Free From Burrs, Dents, Or Deformities. , Boys And Girls Dormitories , Beds/ Partition Wall In Dormitory Hall, Rcc Bed (900Mmx1800mm) With 18Mm Hdhmr With With 1Mm Matt-Finish Laminate On Top Of Bed Shall Be Provided. Rcc Partition Wall Cladding Must Be Using 8Mm Plywood Covered With 2Mm Matt-Finish Laminate All Around Corners And No Sharp Edges. With All Fixtures Fasteners Adhesives Etc All Inclusive Required For Fixing. , Staff Quarters , (A) Rooms Wardrobe , Fabricating, Supplying, Fixing & Placing In Position Wardrobe Of Size 900 (L) X 1800 (H) X 600 (D). The Unit Comprises Of Wardrobe Including, A Single Drawer, Hanger Rod,In Pre Laminated Hdhmr Board Of 18Mm Thickness For Carcase And Shutters With 12Mm Thick Back Panel And Drawer Bottom. 2Mm Edge Banding Matching The Laminiate Selected, Including All Necessary Fixing Arrangement, Glues, Screws, Magnetic Catchers, Handles, Flush Handles For Drawer In Wardrobe, Hinges, Telescopic Sliding Channel For Drawers, As Required. Colour May Vary As Per Approval Of Engineer-In-Charge. [94 Room X 18 Sqft = 1692 Sqft] , (B) Modular Kitchen , (I) Fabricating, Supplying, Installation, Fixing & Placing In Position The Entire Modular Kitchen Under Storage Counter (Height 850Mm) As Per Drawing. The Unit Comprises Of Cabinets, Shutters, Profile Handles, Accessories, Hardware, Glass Etc,. Basic Structural Framing With 18Mm Thick Prelam Hdhmr For Shutters And Carcase And Its Divisions And 12 Hdhmr For Back Panel And Bottom Panel Of Drawers As Mentioned In The Drawing, Edge Banding To Match The Color Of Selected Laminate, Including All Necessary Fixing Arrangement, Nails, Glues, Screws, Magnetic Catchers, Handles, Handles Of Required Lengths As Per The Width Of The Drawer, Shutter, Cabinet, Soft Closing Hinges And Soft Closing Innotech Sliding Channel For Drawers Along With Railings If Required, Fixing The Furniture To The Wall Or To The Floor As Required. All Works Like Fixing The Unit To The Floor Or Wall, Laminates Of Specified Thickness Complete,Other Required Hardware Are Included. Black Granite Countertop, Machine-Cut, Mirror Polished, And Neatly Grouted, Installed True To Level With Proper Support Structure. All Framework Intermittently For Support And Strength, All Details To Be Followed As Per The Drawings And Design Provided And Any Addition Required In Detail Should Be Incorporated In The Shop Drawing To Ensure Complete Functionality And Durability As Intended.All Hdhmr/Plywood And Board Will Be Both Sides Laminte. Nothing Extra Will Be Paid. All Cooridnation Works Based On Civil Dimensions, Integration Of Various Appliances For The Purpose Of Electrical Wiring Are To Be Considered In This Item. Appliances Like Chimney,Sink Etc To Be Paid Seperatly. Natural Stone Counter Top Stone Will Be Provided By The Client And Fixing Will Be Done By The Client Appointed Agency. However Coordination Will Be The Responsibility Of This Contractor. +B69 (Ii) Fabricating, Supplying, Installation, Fixing & Placing In Position The Entire Modular Kitchen Over Head Storage Counter (Height 600Mm) As Per Drawing. The Unit Comprises Of Cabinets, Shutters, Profile Handles, Accessories, Hardware, Glass Etc,. Basic Structural Framing With 18Mm Thick Prelam Hdhmr For Shutters And Carcase And Its Divisions And 12 Hdhmr For Back Panel And Bottom Panel Of Drawers As Mentioned In The Drawing, Edge Banding To Match The Color Of Selected Laminate, Including All Necessary Fixing Arrangement, Nails, Glues, Screws, Magnetic Catchers, Handles, Handles Of Required Lengths As Per The Width Of The Drawer, Shutter, Cabinet, Soft Closing Hinges And Soft Closinginnotech Sliding Channel For Drawers Along With Railings If Required, Fixing The Furniture To The Wall Or To The Floor As Required. All Works Like Fixing The Unit To The Floor Or Wall, Laminates Of Specified Thickness Complete,Other Required Hardware Are Included. All Framework Intermittently For Support And Strength, All Details To Be Followed As Per The Drawings And Design Provided And Any Addition Required In Detail Should Be Incorporated In The Shop Drawing To Ensure Complete Functionality And Durability As Intended.All Plywood And Board Will Be Both Sides Laminte. Nothing Extra Will Be Paid. All Cooridnation Works Based On Civil Dimensions, Integration Of Various Appliances For The Purpose Of Electrical Wiring Are To Be Considered In This Item. Appliances Like Chimney,Sink Etc To Be Paid Seperatly. Natural Stone Counter Top Stone Will Be Provided By The Client And Fixing Will Be Done By The Client Appointed Agency. However Coordination Will Be The Responsibility Of This Contractor. Colour May Vary As Per Approval Of Engineer-In-Charge. , I) King Size Bed: The King-Size Bed Is Constructed Without A Storage Box And Features Robust Materials For Lasting Durability. The Frame, Including The Side Panels And Footboard, Is Made From 18 Mm Thick Pre-Laminated Engineered Wood With A Melamine Finish, Offering A Clean, Wood-Textured Look. The Mattress Base Is Fabricated Using 18 Mm Bwp-Grade Plywood, Fully Edge-Banded To Prevent Warping And Moisture Damage. The Overall Dimensions Of The Bed Are 2040 Mm In Length, 1980 Mm In Width, And 300 Mm In Height To The Base, Providing Ample Support For A Standard King-Size Mattress (1980 Mm × 1830 Mm). The Headboard Stands 800 Mm Tall And Is Divided Into Two Sections. The Lower Portion Is Made Of Laminated Board, While The Upper Section Includes A Cushioned Panel With 50 Mm Pu Foam, Upholstered In Stitched Premium Leatherette For Added Comfort And Aesthetics. The Entire Unit Features A Light Oak Melamine Finish To Match. The Bed Is Supplied In Knock-Down Condition With All Necessary Hardware, Including Cam Locks, Screws, Dowels, And Angle Brackets. Assembly Is Straightforward With Reinforced Metal Corners For Added Strength. , Ii) Side Table:The Side Table Is Constructed Using High-Grade Plywood And Finished In A Light Oak Melamine Laminate For A Clean, Natural Appearance. It Features A Compact Form With Overall Dimensions Of 400 Mm (Width) × 400 Mm (Depth) × 490 Mm (Height). The Unit Has Two Lockable Equally Sized Drawers, Both Equipped With Soft-Close Telescopic Channels For Smooth, Quiet Operation. The Design Incorporates A Handle-Less Front With A Finger-Pull Recess At The Top Edge Of Each Drawer For A Sleek And Minimalist Look. Both Drawers Are Lockable, Enhancing Functionality And Security For Personal Storage. The Surface Is Fully Laminated For Protection Against Wear And Easy Maintenance. , Iii) 06 Seater Dining Table— The Dining Table Shall Be Of Solid Sheesham Wood (Kiln-Dried And Chemically Treated) With Overall Dimensions 1500 Mm × 900 Mm × 760 Mm And A Tabletop Thickness Of Approx. 25 Mm; The Apron Shall Be 25 Mm Thick And Legs Shall Be 80–100 Mm Square In Section, All Joined Using Mortise-And-Tenon Or Equivalent Reinforced Joinery. A Clear Tempered (Toughened) Glass Top Shall Be Provided To Cover The Wooden Top: 10 Mm Clear Toughened Glass Is Recommended For This Size, With Machine-Polished Edges (Flat Polish Or Small Bevel) And Corner Radii For Safety. The Glass Shall Be Supplied Cut To Size For A Nominal 2–3 Mm Reveal From The Top Edge Of The Apron (Or As Directed), Packed Separately And Fitted On Site. Glass Fixing Shall Use Non-Marking Neoprene/Rubber Support Pads (Minimum 6 Pads Per Table) And Anti-Slip Silicone Adhesive/Dots To Hold The Glass In Place Without Damaging The Wood; Stainless Steel Decorative Clamps May Be Provided Where A Visible Fixing Is Required But Should Not Bear The Primary Load. Finish Of The Wood Shall Be A Low-Sheen Natural Polish Or Clear Lacquer; Table Shall Be Supplied Knock-Down With All Required Fasteners And Instructions For On-Site Assembly And Final Glass Placement. The Glass Top Protects The Wood From Scratches, Heat And Spills, Gives A Sleek Aesthetic, And Makes Cleaning Easier (Wipe With Standard Glass Cleaner While Avoiding Aggressive Solvents On Adjacent Wood Finish). Chairs 06 Nos — Each Chair Shall Be Of Solid Sheesham Wood, Finished To Match The Table’S Low-Sheen Polish, With A Slatted Backrest And Straight Legs. Seat Height Shall Be 450 Mm From Finished Floor Level. Seats Shall Be Cushioned With Medium-Density Foam And Fully Upholstered In Durable Synthetic Leather (Leatherette) In A Neutral Tone; Foam Shall Be Supported On A Plywood Board Beneath The Cushion. Chair Dimensions (Seat Width/Depth/Backrest Height) And Leg Sections Shall Be Robust To Match The Table And Shall Be Supplied Knock-Down With Necessary Assembly Hardware. Upholstery Shall Be Stain-Resistant And Maintainable (Spot Cleanable); Wood And Upholstery Care Instructions Shall Be Provided With Each Unit. , (Iv) Sofa Set , (A)Sofa Foyer One Seater Size In Mm - 880(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (B)Sofa Foyer Two Seater Size In Mm - 1460(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (C) Coffee Table The Coffee Table Measures 900 Mm (W) × 600 Mm (D) × 450 Mm (H) And Features A 10 Mm Thick Clear Tempered Glass Top And Shelf Supported On A Stainless Steel 202 Frame Made Of 40×40 Mm Square Tubes With A Mirror-Polished Finish. All Joints Are Argon-Welded, Ground, And Buffed For A Seamless Look. The Lower Glass Shelf For Additional Storage, And Rubber Pads Or Level Adjusters Are Provided At The Base For Stability And Floor Protection. The Table Combines Modern Design, Durability, And Elegant Finish, Making It Ideal For Offices And Reception Areas.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Arunachal Pradesh View Result →
40.
Housing Urban and Rular Development #9405088 Technical Bid
supply of Furniture And Internal Fit-Out At Jnv, Kurung Kumey, Arunachal Pradesh , School Building , (A) Classroom , (I) Classroom Desk Large Size Supply & Installation Big Desk (For Two Persons)-The Overall Dimensions Of Desk Will Be 1066Mmx 930Mm X Height 760Mm, Complete As Per Specifications Enclosed And Direction Of Engineer-In- Charge Having The Table Top Shall Be Made Up Of 18.0 Mm Thick Plywood Is 303 Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish). Table Top Dimensions Shall Be W 930 Mm X D 380 Mm. Edge Towards Bench Shall Be Post Formed With Round Edge. The Remaining Three Edges Must Be Sealed With 2Mmthick Pvc Edge Banding Tape. Edge Band Must Be Trimmed On Edges And Corners. The Desk Shall Be Have Low Chemical Emission Of Vocs (Voltage Organic Compounds) And Carcinogens, Contributing To A Healthier Room Environment. Seat And Back Rest Shall Be Made Of 18Mm Thick Plywood Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish) Except Back Rest. Back Rest Shall Be Have Both Sides Colour Lamination. Technical Details Of Seat And Back Rest Are Mentioned Below:Seating Bench Dimensions Shall L 930 Mm X W 300 Mm X H 450 Mm. Front Side Shall Be Rounded With Post Forming. Remaining Three Edges Shall Sealed With 2Mm Thick Pvc Edge Banding Tape. Back Rest Dimensions Shall L 930 X H 200 Mm Upper Side Shall Be Rounded With Post Forming Remaining Three Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding Tape. Desk Shelve Shall Be Made Of Prime Quality 0.8Mm Thick Crca Sheet Of H150mm X D300mm And Side Stiffeners Of Crca Tube Size 19Mmx19mmx1mmthick. One Vertical Support (Partition) Of Square Tube Size 25Mm Square X1.2Mm Thick Must Be Provided At Centre Of Tray . Upper Modesty Made Of Prime Quality 0.8Mm Thick Crca Sheet Powder Coated Should Be Embossed With Dimples In Round Shape, Height Will Be 150Mm, There Should Be Perforated Lower Modesty Made Of Prime Quality 0.8 Mm Thick Crca Sheet Of Size H150mmxd21mm With Square Perforation, Crca Tube Of Size 19X19x1mm Thick To Be Inserted For Full Length At Bottom Of Jali . Bag Hook Should Be Provide On Both Side Of Piller Made Of Minimum 4Mm Dia Rod Side Frame Structure:- Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25Mmx50mmx1.2Mm Thick Crca Tube , Seat And Back Side Frame Structure Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25.4Mm Diameter X 1.6Mm Thick Erw-1Pipe , There Will Be 8No. Horizontal Supports Are 25Mmx25mmx1.2Mm Thick Crca Pipes. . Bottom Rectangular Tube 50X25x 1.2Mm Thick Should Be Closed With Ppcp Cap Bothside Sand Pipe Dia. 25.4X1.6Mm Thick Should Be Closed With Metal (Backside) And Other Side (Undertheseat) Ppcp Cap, Complete As Per Engineer Incharge Desk Should Be In Semi Knock Down Form With The Help 16 Connecting Pipes ; 8 Pipes On Each Side : Connecting Pipe Size Will Be 20X20x1.2Mm .All Metal Pieces Shall Be Welded Properly Strongly And Conformity With Regulations With Co2 Welding Shall Be Used , Crca Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form A Layer Of Base Coating Of (Iron Phosphating) (0.4 – 0.8) Gm/M² , Automatic Spray Coating Shall Be Applied To Be Followed By A Drying Process In A Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 Tank Treatment With Minimum 45-50 Micron Powder Coating. , (Ii) Classroom Desk Medium Size Supply & Installation Medium Desk (For Two Persons)-The Overall Dimensions Of Desk Will Be 900Mm X 890Mm X Height 690Mm, Complete As Per Specifications Enclosed And Direction Of Engineer-In- Charge Having The Table Top Shall Be Made Up Of 18.0 Mm Thick Plywood Is 303 Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish). Table Top Dimensions Shall Be W 890 Mm X D 380 Mm. Edge Towards Bench Shall Be Post Formed With Round Edge. The Remaining Three Edges Must Be Sealed With 2Mmthick Pvc Edge Banding Tape. Edge Band Must Be Trimmed On Edges And Corners.The Desk Shall Be Have Low Chemical Emission Of Vocs (Voltage Organic Compounds) And Carcinogens, Contributing To A Healthier Room Environment. Seat And Back Rest Shall Be Made Of 18Mm Thick Plywood Of Mr Grade Osl (One Side Shall Be Laminated, And Other Side Shall Have Balancer Finish) Except Back Rest. Back Rest Shall Be Have Both Sides Colour Lamination. Technical Details Of Seat And Back Rest Are Mentioned Below:Seating Bench Dimensions Shall L 890 Mm X W 300 Mm X H 400 Mm. Front Side Shall Be Rounded With Post Forming. Remaining Three Edges Shall Sealed With 2Mm Thick Pvc Edge Banding Tape. Back Rest Dimensions Shall L 890 X H 200 Mm Upper Side Shall Be Rounded With Post Forming Remaining Three Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding Tape. Desk Shelve Shall Be Made Of Prime Quality 0.8Mm Thick Crca Sheet Of H150mm X D300mm And Side Stiffeners Of Ss Crca Tube Size 19Mmx19mmx1mmthick. One Vertical Support (Partition) Of Square Tube Size 25Mm Square X1.2Mm Thick Must Be Provided At Centre Of Tray . Upper Moedsty Made Of Prime Quality 0.8Mm Thick Crca Sheet Powder Coated Should Be Embossed With Dimples In Round Shape, Height Will Be 150Mm, There Should Be Perforated Lower Modesty Made Of Prime Quality 0.8 Mm Thick Crca Sheet Of Size H150mmxd21mm With Square Perforation, Crcat Ube Of Size 19X19x1mm Thick To Be Inserted For Full Length At Bottom Of Jali . Bag Hook Should Be Provide On Both Side Of Piller Made Of Minimum 4Mm Dia Rod Side Frame Structure:- Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25Mmx50mmx1.2Mm Thick Crca Tube , Seat And Back Side Frame Structure Made Of Prime Quality Crca Pressed Form Section 165Mmx25mmx1mm Thick Welded To 25.4Mm Diameter X 1.6Mm Thick Erw-1Pipe , There Will Be 8No. Horizontal Supports Are 25Mmx25mmx1.2Mm Thick Crca Pipes. . Bottom Rectangular Tube 50X25x 1.2Mm Thick Should Be Closed With Ppcp Cap Bothside Sand Pipe Dia. 25.4X1.6Mm Thick Should Be Closed With Metal (Backside) And Other Side (Undertheseat) Ppcp Cap, Complete As Per Engineer Incharge Desk Should Be In Semi Knock Down Form With The Help 16 Connecting Pipes ; 8 Pipes On Each Side : Connecting Pipe Size Will Be 20X20x1.2Mm .All Metal Pieces Shall Be Welded Properly Strongly And Conformity With Regulations With Co2 Welding Shall Be Used , Crca Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form A Layer Of Base Coating Of (Iron Phosphating) (0.4 – 0.8) Gm/M² , Automatic Spray Coating Shall Be Applied To Be Followed By A Drying Process In A Thermal Furnace With Suitable Temperature And Time For The Process , Metal Pipe & 7 Tank Treatment With Minimum 45-50 Micron Powder Coating. , (Iii)Teacher Table :Supplying And Installation Of Knock Down Type Office Table Made Of Pre-Laminated Mdf Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Top Of Size 1200 X 600 X 750 Mm. Worktop Shall Be Rounded In All Four Corners And Should Have An Overhung Of 50Mm Alongwith One Drawer Unit Made Of 0.5Mm Thick Crca Steel Sheet. The Table Top Shall Be Supported Over Legs Consists Of 4 Powdered Coated Ms Legs With Connected Beams With Pipe Size 25X25x1.2 Mm Thick. , (Iv)Teachers Chair, Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (V) Teacher Board [Excluding Cost Of Interactive Flat-Panel Display (Ifpd)] Technical Specification For Smart Board With Double-Track Sliding System For Green And White Boards Fitted In An Anodised Aluminium Frame With Concealed Cable Management And Provision For Mounting Of Digital Screen: Supply, Installation, Testing, Commissioning (Sitc) Of An Integrated Digital Teaching–Learning Solution Comprising: (A) Anodised Aluminium Frame, Double Track Sliding System For White & Green Board And Provision For Mounting Of Digital Screen With Concealed Cable Management, (B) Vitrified Magnetic Ceramic-Steel Green Board And White Board Panels. • Dimensions And Configuration: Total Width Of The Setup Is ~12 Feet And Height ~4.0 Feet From The Board Surface (Excluding The Width Of Aluminium Frame). • Material: Providing And Fixing Anodised Aluminium (Alloy 6063-T6) Framed Sliding System For Smart Board With Minimum 2.0 Mm Thick Extruded Sections, Anodised To Aa15 Grade As Per Is 1868, Mounted On A Heavy-Duty Top-Hung Aluminium Track (Min. 2.5 Mm Thick) With Sealed Ball-Bearing Nylon/Pu Rollers (Load Capacity Not Less Than 120 Kg Per Panel), Concealed Bottom Guide, Epdm Gaskets, Ss-304 Fasteners, Pelmet/Valance Cover, And Soft End-Stops/Soft-Close Mechanism, Including All Brackets, Fixings, Alignment, Cable Provisions, Commissioning, And Making Good Complete As Per Drawings And Engineer-In-Charge. • Design: One Slot To Fix Ifpd, Other Slot For Green & White Boards Sliding On Double Track System With Locking Facility On Sliding Frame To Keep The Ifpd Display Safe. • Top & Bottom Rails: Tracks Shall Be Aligned And Reinforced To Ensure Boards Move Easily And Without Wobble. • Back Side: The Backside Of The Smart Board, To Concealed The Wall Surface, Provided & Fixed With 18 Mm Thick Hdhmr Board Laminated (White Coloured Matte Finish) With 0.8 Mm, Edges Sealed With 1 Mm Pvc Edge Banding, Fixed To The Anodised Aluminium Frame With Concealed Screws/Rivets, With Ventilation Slots As Required, And Shall Be Moisture, Termite And Borer Resistant. • Load Capacity: Safe To Hold Ifpd + White & Green Boards With =1.5× Safety Factor. • Cable Management: Built-In Channels For Power, Lan, Hdmi, Usb. • Safety: Rounded Edges, Tamper-Resistant Covers, Concealed Fixing. • Finish: Durable, Corrosion-Resistant Coating Suitable For Indoor Use. • Additional Requirements:(A) All Boards And The Structure Must Be Securely Fixed To The Wall With Appropriate Fasteners. (B) Provision For Cable Management Must Be Included For The Ifpd (I.E., Concealed Conduit/Path For Power And Data Cables). , (C) The Unit Must Be Free From Sharp Edges, Splinters, Or Any Protruding Parts That Could Cause Injury. (D) Installation Height Should Ensure Comfortable Writing Access For Average Adult And Student Height (Typically Bottom Edge ~2.5 To 3 Feet From The Floor). (B) Vitrified Magnetic Ceramic-Steel Green Board And White Board Panels: • Function: Boards Shall Slide Horizontally On A Top And Bottom Aluminium/Steel Channel Track To Fully Cover Or Reveal The Ifp As Needed. • Material: Vitrified Ceramic-Steel, Magnetic, Double-Coated. • Sliding Boards: Quantity: 1 No. Green Board & 1 No. White Board. • Green Board Surface: Matte, Chalk-Friendly, Stain/Scratch Resistant. • White Board Surface: Glossy Surface, Dry-Erase Marker Friendly, Ghost-Free, Easy Clean. • Size: ~6 Feet (W) × 4 Feet (H) (Each Board) With Thickness 8Mm. • Frame: Anodised Aluminium, Rounded Edges, Concealed Fasteners.Note - Dimensions Mentioned Are Indicative. Actual May Vary As Per Site Requirements , (B) Principal And Vice-Principal Room , Table: Supplying And Installation Of Site Knock Down Type Office Table As Per Approved Design And Directrion Of Engineer-In-Charge. Worktop-Worktopshallbemade25mmthickpre-Laminatedmdfboardwithdecorativelaminationononesideandbalancing Lamination On Other Side Confirming To Is 12406:2003 With Post Forming On Front,Back Andmachine Pressedpvc Egde Banding 2Mm Thick Glued With Industrial Adhesive And Diffused With Board Monolithically On Other Two Sides. Table Top Shall Have 75Mm Overhung On Front And 25Mm Overhung On Sides. Understructure- C-Type Leg Shall Be Made Of Tubular Section Of 50Mm X 50Mm X 1.6Mm (Wall Thickness) Thick Vertical Member And40mm X40mmx1.6Mm(Wall Thickness) Horizontal M.S.Pipe Confirming Is-Grade 4932Shall Be Finished With Epoxy Polyster Powder Coated Dft50-60Micron.Thelegsshallbefittedtothegroundwithm8screwlevelerwiththeheightadjustmentupto15mm.Thecross Membersshallbemountedbyendbracketsmadeof3mmthickcrcasteelsheetconfirmingis513:2008 Andfinishedwithepoxy Polyster Powder Coated Dft 50-60 Micron Confirming Is 13871:1993. Wiremanagement-Electricalwiresshallbecarriedfromhorizintal/Verticalduct Madeof0.7Mmcrca Steelsheet Confirmingtois 513:2008. The Switch Plate Or Grommet Depending Upon Requirement Shall Also Be Provided For Electrical/Lan Connection On Table Top. Modesty Panel -Modesty Panel Of Height 450Mm Shall Be Made Of 1.5Mm Thick Crca Sheet Sheet Confirming To Is 513: 2008And Shall Be Finised With Epoxy Polyster Powder Coated Dft 50-60Micron. Storage Body- Storage Top Shall Also Be Made Of 25Mm Thick Pre-Lam Mdf Board Confirming To Is 12406:2003 With Post Forming On Two Sides And Machine Pressed Pvc Egde Banding 2 Mm Thick Glued With Industrial Adhesive And Diffused With Board Monolithically On Other Two Sides. The Body Of Storage Unitsshall Be Made Of 0.8Mm Thick Crca Steel Sheet And Skirting Shall Be Of 1.2Mm Thick Crca Steel Sheet Confirming To Is 513: 2008 Finished With Epoxy Powder Coated Of Dft 50-60 Micron Confirming Is 13871:1993. Internal Shelves Shall Be Also Made Up Of 0.8Mm Crca Steel Sheet Confirming To Is 513: 2008 And Shall Be Mounted With The Metal Shelf Support Pin Made Of 2Mm Thick Crca Steel Sheet With Nickel Or Chrome Plating.M10 Screw Leveler Is Given With Height Adjustment Up To 12Mm To 15Mm. , (I) Principal Room Table Table Of Size 1800Mm (W) X 900Mm (D) X 750Mm (H) With Side Storage Of Size 900Mm (W) X 450Mm (W) X 750Mm (H) And Back Storage 1800Mm (W) X 450Mm (D) X 750Mm (H) As Per Specifications Above , (Ii) Vice-Principal Room Table Table Of Size 1650Mm (W) X 900Mm (D) X 750Mm (H) With Side Storage Of Size 900Mm (W) X 450Mm (W) X 750Mm (H) And Back Storage1650 Mm (W) X 450Mm (D) X 750Mm (H) As Per Specifications Above. , (Iii) Principal Room Chair High Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1210H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat,Used Pu Moulded Foam On Seat Of D-45 Kg/M3 , Back Ofchair Is Made Of Injection Moulded Pp Material Structure Upholstered With Mesh Fabric , Adjustable Lumber Support Upholstered With Fabric , Adjustable Headrest On Back Upholstered With Mesh Fabric ,Seat Size:- 470W ±10 X 460D ±10 X 70Thick. ±5 Mm , Back Size:500W±10X780h±10,Mechanism:-Thesynchrotiltmechanism,Usedgasliftof90mmsizeofclass-Ivgrade,Armrest:-Pu Paddedadjustable Armrestfixedwith Seat ,Chair Base & Wheels: Ss 202 Polished Finish Plated Base Consists Of5 Prongs With 640±5Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , (Iv) Principal Roomvisitor Chair, Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (V) Vice-Principal Room Chair High Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1210H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat,Used Pu Moulded Foam On Seat Of D-45 Kg/M3 , Back Ofchair Is Made Of Injection Moulded Pp Material Structure Upholstered With Mesh Fabric , Adjustable Lumber Support Upholstered With Fabric , Adjustable Headrest On Back Upholstered With Mesh Fabric ,Seat Size:- 470W ±10 X 460D ±10 X 70Thick. ±5 Mm , Back Size:500W±10X780h±10,Mechanism:-Thesynchrotiltmechanism,Usedgasliftof90mmsizeofclass-Ivgrade, Armrest:-Pu Paddedadjustable Armrestfixedwith Seat ,Chair Base & Wheels: Ss 202 Polished Finish Base Consists Of5 Prongs With 640±5Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , (Vi) Vice Principal Visitor Chair: Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (C) Sofa Set , (I)Sofa Foyer One Seater Size In Mm - 880(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (Ii)Sofa Foyer Two Seater Size In Mm - 1460(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (Iii)Sofa Foyer Three Seater Size In Mm - 1930(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (Iv) Coffee Table The Coffee Table Measures 900 Mm (W) × 600 Mm (D) × 450 Mm (H) And Features A 10 Mm Thick Clear Tempered Glass Top And Shelf Supported On A Stainless Steel 202 Frame Made Of 40×40 Mm Square Tubes With A Mirror-Polished Finish. All Joints Are Argon-Welded, Ground, And Buffed For A Seamless Look. The Lower Glass Shelf For Additional Storage, And Rubber Pads Or Level Adjusters Are Provided At The Base For Stability And Floor Protection. The Table Combines Modern Design, Durability, And Elegant Finish, Making It Ideal For Offices And Reception Areas. , (D) Staffroom , (I) Table (Seating Capacity As Per Actual Requirement) Supplying And Installation Of A Modular, Knock-Down Center Island Table Sized Approximately 3600 Mm In Length (Adjustable To Actual Requirements) By 1350 Mm In Width And 750 Mm In Height, Constructed From High-Quality 25 Mm Thick Commercial Grade Plywood Or Bwr (Boiling Water Resistant) Grade Plywood With Decorative Lamination On Visible Faces And Balanced Lamination Beneath For Enhanced Strength And Moisture Resistance. All Edges Are Sealed With 2 Mm Thick Machine-Pressed Pvc Edge Banding Bonded With Industrial Adhesive To Ensure A Seamless, Monolithic Appearance. The Gable Ends Are Fabricated Of The Same 25 Mm Thick Commercial Grade Plywood With Decorative Lamination On Both Sides And Matching Edge Banding For Consistent Aesthetics And Superior Durability.Modesty 18Mm Matching Laminate. The Table Shall Have An Underbody Vertical Support Panel Running Continuously Along Its Length To Enhance Stability And Strength.The Understructure Uses Precision-Cut, Laminated Plywood Panels Assembled With Knock-Down Fittings For Ease Of Installation And Future Reconfiguration, Ensuring Superior Load-Bearing Capacity And Long-Term Durability. A Concealed Wire Management System Beneath The Worktop Integrates Pre-Laminated Plywood Cable Trays Or High-Quality Plastic Trays Fixed With Durable Brackets, Complete With Provisions For Switch Plates And Grommets To Facilitate Safe, Organized Routing Of Electrical And Data Cables. All Surfaces Are Finished For Scratch And Stain Resistance With Anti-Fungal And Moisture-Resistant Properties, And Installation Will Follow Best Woodworking Practices, With Final Dimensions And Seating Capacity Determined By The Actual Site Layout. , (Ii) Work Space With In-Built Lockable Overhead Storage Space For Staffroom (As Per Actual Requirement) Supplying And Installation Of Site Knock-Down Type Modular Wall-Mounted Workspace Unit Of Approximate Size 900W X 600D X 750H Mm (For One Staff), Including Working Counter And Lockable Overhead Storage Cabinet Of 900W X 450D X 650H Mm. The Structure Shall Be Made Of 18 Mm Thick Bwp Grade Plywood With Decorative Laminate On External Surfaces And Balancing Laminate On Inner Faces Conforming To Is:303/Is:12406. All Exposed Edges Shall Be Sealed With 2 Mm Pvc Edge Banding. The Worktop Shall Be 25 Mm Thick Laminated Plywood Board With Post-Formed Front Edge And Machine-Pressed Pvc Edge Banding, Securely Fixed To The Wall Using Concealed Ms Cleats And Brackets. The Overhead Cabinet Shall Be Fitted With Soft-Close Concealed Hinges, Ss Handles, And Magnetic Catchers Of Approved Make, With One Adjustable Shelf And Modular Connectors For Alignment And Expansion To Adjoining Units. Each Workspace Shall Include Provision For Electrical Connectivity With 6A/16A Modular Sockets (As Per Requirement) Positioned At Approximately 450 Mm Above Finished Floor Level For Easy Access. The Worktop Shall Have A Circular Cable Hole (50–60 Mm Diameter) With Grommet For Laptop And Equipment Wiring. All Wiring, Sockets, And Conduits Shall Be Concealed Neatly Within The Table Body, Routed Through Internal Pvc Raceways To Maintain A Clean, Clutter-Free Appearance. Junction Boxes And Ducts Shall Be Integrated To Provide Safe, Organized Cable Management Without Visible Wiring. The Entire Unit Shall Be Wall-Mounted Using Heavy-Duty Ms Brackets Or Suitable Fasteners Based On Wall Type, Finished Neatly With Matching Silicone Sealant At All Joints. All Fittings And Hardware, Including Soft-Close Hinges And Handles, Shall Be Of Reputed Make. The Unit Shall Be Termite-Resistant, Moisture-Resistant, Easy To Maintain, And Made From Isi-Marked Prime Quality Boards. The Overall Layout And Detailing Shall Match The Approved Reference Image, With Actual Dimensions Finalized As Per Site Requirements And Direction Of The Engineer-In-Charge. , (Iii) Chair Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (Iv) Personal Locker Unit For Staffroom And One Each For Principal And Vice Principal Room Supplying And Installation Of Metal Lockers With Cam Lock One Unit Consiting Of 380Mm (W) X 450Mm (D) X 1800 Mm (H) With 4 Lockers. Body-Lh And Rh Side And Back Panel Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008. Shelf Hanging Bracket Is Welded On Both The Side Panel By Spot Welding. Shelf Hanging Bracket Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008. Front Frame, Top And Bottom Part Made Up 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008 And Horizontal Part Is Made Up 0.8 Mm Thick Crca Steel Sheet Confirming To Is 513:2008. On A Front Frame Horizontally Provision Is Given At A Common Distance To Hold Shutter Bracket. Locker’S Top Is Made Up Of 0.8Mm Thick Crca Steel Sheet Confirming Is 513:2008 Which Is Having Standard Dimension 375 X378mm. Shelf Is Also Made Up Of 0.8 Mm Crca Steel Sheet Confirming To Is 513:2008. Shutter- Is Made Up On 0.8Mm Thick Crca Steel Sheet Confirming To Is 513:2008. All The Shutter Are Hung On Shutter Pin And Shutter Bracket, Louvers Are Given In Shutter For Air Flow. Pvc Flush Handle And Name Plate Is Used For Handling And For Name Plate Tagging. Standard Locking Arrangment Is Used For Locking Each Shutter. The Bodies Including Shelves Are Given Anti-Rust Surface Treatment & Are Powder Coated With Epoxy Polyester Powder Coating Of Dft 50- 60 Micron Confirimg To Is 13871:1993. , (E)Library , (I) Supply And Installation Of Glass-Door Storage Of Size 915 Mm (W) X 482Mm (D) X 1980Mm (H). It Should Have Shelf Thickness Of 0.8Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) With Clear Glass Of > 4.0 Mm Thick And All Other Components Shall Have A Thickness Of 0.8Mm. These Components Shall Be Made Of Crca Steel Sheet ‘D’ Grade High Yield Strength As Per Is 513:2008 The Glass Door Storwel Shall Have A Ss Handle And A Two-Way Locking Mechanism With Shooting Bolt. It Should Have A Height-Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base.All Metal Components Would Be Epoxy Polyster Powder Coated Dft 50-60 Micron Confirimg To Is 13871:1993. , (Ii) Wall Mounted Built In Open Book Shelf : Overall Size 900L (Length May Vary As Per Actual Requirement) X300dx2100hmm,Top Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Banding ,Side Panel Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending , Skirting Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending ,Back Panel Made Up Of 18Mm Thick Postlam Plywood , One Number Of Bottom Storage Cabinets Alongwith The Complete Length Of Heght 600Mm As Per Ref. Image ,Shelf Made Up Of 18Mm Thick Postlam Plywood With Pvc Edge Bending, All Wooden Panels Fix Joints With Minifix Dowels & Other Fitting Equipment , All Wooden Panels Prime Quality Board With Isi Marked. Complete Structure Design Should Be As Per Reference Image. , (Iii) Table (Seating Capacity As Per Actual Requirement) Supplying And Installation Of A Modular, Knock-Down Center Island Table Sized Approximately 3600 Mm In Length (Adjustable To Actual Requirements) By 1350 Mm In Width And 750 Mm In Height, Constructed From High-Quality 25 Mm Thick Commercial Grade Plywood Or Bwr (Boiling Water Resistant) Grade Plywood With Decorative Lamination On Visible Faces And Balanced Lamination Beneath For Enhanced Strength And Moisture Resistance. All Edges Are Sealed With 2 Mm Thick Machine-Pressed Pvc Edge Banding Bonded With Industrial Adhesive To Ensure A Seamless, Monolithic Appearance. The Gable Ends Are Fabricated Of The Same 25 Mm Thick Commercial Grade Plywood With Decorative Lamination On Both Sides And Matching Edge Banding For Consistent Aesthetics And Superior Durability.Modesty 18Mm Matching Laminate. The Table Shall Have An Underbody Vertical Support Panel Running Continuously Along Its Length To Enhance Stability And Strength.The Understructure Uses Precision-Cut, Laminated Plywood Panels Assembled With Knock-Down Fittings For Ease Of Installation And Future Reconfiguration, Ensuring Superior Load-Bearing Capacity And Long-Term Durability. A Concealed Wire Management System Beneath The Worktop Integrates Pre-Laminated Plywood Cable Trays Or High-Quality Plastic Trays Fixed With Durable Brackets, Complete With Provisions For Switch Plates And Grommets To Facilitate Safe, Organized Routing Of Electrical And Data Cables. All Surfaces Are Finished For Scratch And Stain Resistance With Anti-Fungal And Moisture-Resistant Properties, And Installation Will Follow Best Woodworking Practices, With Final Dimensions And Seating Capacity Determined By The Actual Site Layout. , (Iv)Chair, Overall Dimension:- W600±10 X 600D ±10 X 890H ±10 Mm,Seat Of Medium Back Visitor Chair Is Made Of 12Mm Thickhotpressedplywoodpastedwithpumouldedfoamwithfabricupholsteryonseat,Usedpumouldedfoamonseatofd-45 Kg/M3, Back Of Medium Back Chair Is Made Of Injection Moulded Pp Material Structure With Mesh Fabric, Seat Size:- 460W ±10X 470D ±10 X 60Thick. ±5 Mm , Back Size:- 440W ±10 X 470H ±10,Armrest:- Fixed Pp Armrest ,Understructure:- Cantilever Frame Madess Polished Finish Round Pipe With Plastic Bushes . Frame Material -Ss 202 Polished Finish , (F) Computer Lab , (I) Computer Work Station Supplying And Installation Of Knock Down Type Dual Computer Work Station Of Unit Size 1500Mm (Length, Actual Length May Vary As Per Actual Site Requirement) X 600M (W) X 750Mm (H) For Two Students Work Top- Work Top Shall Be Made 25Mm Thick Laminated Plywood With Decorative Lamination On One Side And Balancing Lamination On Othersideconfirmingtois12823:1990With2mmthickmachinepressedpvcedgebandinggluedwithindustrialadhesiveand Monolithically Diffused With Board On All Sides. Understructure Supporting Frame Consist Oflaminated Plywood Gable Ends Of 18Mm Wire Management-The Vertical /Electrical Duct & Horizontal Cabletray ( Wire Carriers) Aremadeof Crca Steel Sheet & Fixed To The Understructure Below Worktop With Specially Designedbrackets. Provision For Fixing Switch Platesare Prividedin The Cable Tray For Easy Access Through Wire Mangaer Or Pvc Grommet. , (Ii) Computer Chair For Student Medium Back Revolving Chair, Overall Dimension:- 700W ±10 X 700D ±10 X 1010H ±10 Mm,Seat Of Medium Back Chair Is Made Of 12Mm Thick Hot Pressed Plywood Pasted With Pu Moulded Foam With Fabric Upholstery On Seat ,Used Pu Moulded Foam On Seat Ofd-45 Kg/M3 , Back Of Chair Is Made Of Injection Moulded Pp Material Structure Combination Of Upholstered With Mesh Fabric , Seat And Back Connected Through Metal Powder Coated Plate Having Adjustable Lumber Support Upholstered With Fabric , Seat Size:- 490W ±10 X 450D ±10 X 70Thick. ±5 Mm , Back Size: 525W ±10 X640h ±10,Mechanism:- The Synchro Tilt Mechanism ,Using Gaslift Of 90 Mm Size Of Class 3 Grade,Armrest: Pu Padded Adjustable Armrest,Chair Base & Wheels: Revolving Pedestal Ss 202 Polsihed Finish Base Consists Of 5 Prongs With 640±5 Mm Pitch Circle Diameter, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor . , (G) Laboratories , (I) Supply And Installation Of Glass-Door Storage Of Size 915 Mm (W) X 482Mm (D) X 1980Mm (H). It Should Have Shelf Thickness Of 0.8Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) With Clear Glass Of > 4.0 Mm Thick And All Other Components Shall Have A Thickness Of 0.8Mm. These Components Shall Be Made Of Crca Steel Sheet ‘D’ Grade High Yield Strength As Per Is 513:2008 The Glass Door Storwel Shall Have A Ss Handle And A Two-Way Locking Mechanism With Shooting Bolt. It Should Have A Height-Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base.All Metal Components Would Be Epoxy Polyster Powder Coated Dft 50-60 Micron Confirimg To Is 13871:1993. , (I) Physics Lab , Along The Wall Table:: Supply And Installation Of Along-The-Wall Knock Down Type Modular Laboratory Tables Of Size 1400 Mm(L) (Length May Vary As Per Actual Requirement) × 750 Mm (W) × 900Mm H . Above The Counter, With An Internal Conduit For All Wiring. Modular Switch Plates And 02 Nos Of 220V/16A Switch Socket (With Individual Circuit Protection) Will Be Cnc-Mounted Every 1 M (Or Per Site Layout). All Conduits And Components Shall Comply With Applicable Laboratory Safety And Performance Standards. Dust-Proof, Removable Access Covers To Permit Maintenance And Future Upgrades, And Outlets To Be Ergonomically Positioned For Seated And Standing Use. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Crca With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg). The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , Island Table:The Laboratory Table Shall Be Provided As Knock Down Type Modular Island Laboratory Tables Units Of Overall Size 8000(L) (Length May Vary As Per Actual Requirement) × 1500(W) × 900H . It Shall Be Constructed In Modular Segments Of 1400(L) × 1500(W) × 860(H) Mm Each For Ease Of Manufacture, Handling, And Installation. The Worktops Will Include A Powder-Coated Bus Running Their Full Length, Above The Counter, With An Internal Conduit For All Wiring. Modular Switch Plates And 04 Nos (02 Facing Each Side) Of 220V/16A Switch Socket (With Individual Circuit Protection) Will Be Cnc-Mounted Every 1 M (Or Per Site Layout). All Conduits And Components Shall Comply With Applicable Laboratory Safety And Performance Standards. Dust-Proof, Removable Access Covers To Permit Maintenance And Future Upgrades, And Outlets To Be Ergonomically Positioned For Seated And Standing Use. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Crca With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg). The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , (Ii) Chemisty Lab , Along The Wall Table: Supply And Installation Of Along-The-Wall Knock Down Type Modular Laboratory Tables Of Size 1400(L) (Length May Vary As Per Actual Requirement) × 750(W) × 900(H) Mm × 1550H (Two-Tier). Four Standard Ss304 Sinks Shall Be Installed, Each Fitted With A 3-Way Ss 304 Faucet Of Premium Make. Reagent Racks Made Completely Out Of Stainless Steel Shall Be Provided To Cover The Entire Table Length(Along The Wall) Except The Sink Area. These Racks Shall Be 300D × 700H And Of Complete Modular Design, Consisting Of Two Horizontal Storage Shelves Made Of Stainless Steel With Suitable Cutouts For Electrical Switches And Sockets. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Stainless Steel Sheet Polished Finish. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Ss Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Stainless Steel Sheet With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg). Reagent Shelves Shall Be Made Of A Ss 304, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , Island Table: The Laboratory Table Shall Be Provided As Knock Down Type Modular Island Laboratory Tables Units Of Overall Size 8000(L) (Length May Vary As Per Actual Requirement) × 1500(W) ×900(H) Mm × 1550H (Two-Tier). It Shall Be Constructed In Modular Segments Of 1600(L) × 1500(W) × 860(H) Mm Each For Ease Of Manufacture, Handling, And Installation. Four Standard Ss304 Sinks Shall Be Installed, Each Fitted With A 3-Way Ss 304 Faucet Of Premier Make. Stainless Steel 304 Reagent Racks Shall Be Provided Across The Entire Table Length In Centre Except The Sink Areas, With Dimensions 300D × 700H. These Racks Shall Also Be Of Modular Design With Two Horizontal Stainless Steel Shelves, Cutouts For Switches And Sockets, Provision For Electrical Outlets, And Accommodation For Granite Pieces. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Ss Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Powder Coated Crca With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg). Reagent Shelves Shall Be Made Of A Polished Finish Ss, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , (Iii) Biology Lab Table , Along The Wall Table: Supply And Installation Of Along-The-Wall Knock Down Type Modular Laboratory Tables Of Size 1400(L) (Length May Vary As Per Actual Requirement) × 750(W) × 900(H) Mm × 1550H (Two-Tier). Four Standard Ss304 Sinks Shall Be Installed, Each Fitted With A 3-Way Ss 304 Faucet Of Premium Make. Reagent Racks Made Completely Out Of Stainless Steel Shall Be Provided To Cover The Entire Table Length(Along The Wall) Except The Sink Area. These Racks Shall Be 300D × 700H And Of Complete Modular Design, Consisting Of Two Horizontal Storage Shelves Made Of Stainless Steel With Suitable Cutouts For Electrical Switches And Sockets. Additional Switches And Sockets Shall Be Provided As Required. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Stainless Steel Sheet Polished Finish. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Ss Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Stainless Steel Sheet With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg).. Reagent Shelves Shall Be Made Of A Ss, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , Island Table: The Laboratory Table Shall Be Provided As Knock Down Type Modular Island Laboratory Tables Units Of Overall Size 8000(L) (Length May Vary As Per Actual Requirement) × 1500(W) × 900(H) Mm × 1550H (Two-Tier). It Shall Be Constructed In Modular Segments Of 1400(L) × 1500(W) × 900(H) Mm Each For Ease Of Manufacture, Handling, And Installation. Four Standard Ss304 Sinks Shall Be Installed, Each Fitted With A 3-Way Ss 304 Faucet Of Premium Make. Stainless Steel Reagent Racks Shall Be Provided Across The Entire Table Length In Centre Except The Sink Areas, With Dimensions 300D × 700H. These Racks Shall Also Be Of Modular Design With Two Horizontal Stainless Steel Shelves, Cutouts For Switches And Sockets, Provision For Electrical Outlets, And Accommodation For Granite Pieces. All Base Storage Cabinets Shall Be Of The Design “1 Drawer + 2 Shutters” Made Of 0.8 Mm Thick Powder Coated Crca. Each Storage Box Without Granite Shall Be 600W × 570D × 713H, Supported On 100 Mm Legs Andshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability. The Upper Top Shall Be Of 18-19 Mm Thick Black Granite, With All Joints Sealed Using Silicon Sealant. The Cabinet Bodies Shall Be Of Over-Closing Design, Fabricated Entirely On Cnc Machines To Ensure Precision. The Storage Bodies Shall Be Neatly Jointed With Accurately Matched Sides To Avoid Gaps. Shutters Shall Be Made Of 0.8 Mm Thick Powder Coated Crca With Handles, And Drawers Shall Run On Soft Close Sliding Channels (35-50Kg).. Reagent Shelves Shall Be Made Of Polished Finish Ss, Provided With Electrical Switches, Sockets, And Cutouts As Required. The Worktops Shall Be Of 18-19 Mm Thick Black Granite, Flushed With Sink Units And Taps. Installation Shall Include All Utility Service Outlets, Accessory Fittings, Plumbing, Electrical Switches, And Fittings Shall Be As Per Requirement. All Metallic Parts Shall Be With Corrosion Resistant Coating And Shall Be Welded Strongly Using Co2 Welding, Conforming To Safety Regulations. Panels Shall Be Secured With Nuts, Bolts, And Riveting. , (Iv) Lab Stool Supply And Installation Of Lab Stool Seat Revolving Stool With Backrest Overall Dimension: 410W ±10 X 410D ±10 X 820H ±10 Mm,Seat Ofchairismadeof12mmthickhotpressedplywoodpastedwithhighdensity Pufoam&Leatherette Upholstery,Back Ismade Of 12Mmthickhotpressedplywoodpastedwithpufoamd-40Kg/M3,H-20Seatandbackfixedthroughmetal Powdercoatedspine Covered With Plastic Cover, Seat Size: 400W ±10X 400D ±10 X 75Thick. ±5 Mm, Back Size: 450W ±10 X 240H ±10 X 50Thick. ±5Mm, Ground To Seat Height-440-560Mm, Mechanism:- Machanism Design With Features Of Revolving At 360 Degree.Machanism Provided Upright Position Locking,Seating Height Can Be Adjusted With A Pneumatic Gas Lift,Gaslift: Lift -Used Gaslift Of 90 Mm Size Of Class- Iv Grade With Plastic Bellow Cover, Chair Base & Wheels: Chair Basemade Of Polished Finished Ss 202 Grade Stainless Steel, Base Consists Of Polished Finished Ss 202 Grade Stainless Steel 5 Prongs With 560±5 Mm Pitch Circle Diameter, Polished Finished Ss 202 Grade Stainless Steel Circular Foot Rest As Per Ref. Image, 50Mm Dia. Black Nylon - Twin Wheel Pin Castor. , Kitchen & Dining , (A) Dining Table Dining Table: Polished Finish Ss Dinning Table Consists Of Dinning Top Is Made Up Of 1 Mm Thickness Stainless Steel Sheet Of Ss 304 Grade With Overall Dimension Of 1800(L) X 700(D) X 750(H). The Table Top Is Reinforced With A 18 Mm Ply Board On Stainless Steel Frame Of Square Section 40Mmx40mmx1.6Mm. Dinning Top Of Stainless Steel Sheet Shall Be Extended To The Sides And A Depth Upto 40 Mm Under The Table Top In All Directions Includingedge Rounding, Grinding And Finishing Etc. All Complete. The Table Top Shall Finish In Such A Manner To Avoid Any Sharp Edges. The Table Will Be Supported By Four Hollow Legs Made From Ss 304 Grade Stainless Steel. The Hollow Legs Shall Be Of Square Type Of Size50mmx50mmx1.6Mm.Theselegsshallbesecurelyweldedormechanicallyfastenedtotheundersideofthetabletopframe.For Additional Structural Stability, Stainless Steel Cross Supports Shall Be Provided Between The Legs As Shown In Figure With 40Mmx40mmx1.6Mm Ss Square Section. The Table Shall Include Rubber Shoes At The Bottom Of Each Leg To Prevent Floor Damage And Ensure Stability. The Design Shall Prioritize User Safety With No Sharp Corners Or Edges. The Table Must Be Structurally Sound And Capable Of Supportingauniformlydistributedloadofatleast250kg.Allmaterialsusedmustconformtorelevantisstandards,Andthefinished Product Should Be Free From Burrs, Dents, Or Deformities. Ss 304. , (B) Dining Bench Dining Bench: The Bench Shall Be Of Size 1800 Mm In Length, 300 Mm In Depth, And 450 Mm In Height, Suitable For Use In Residential Schools. The Bench Top Shall Be Made Of 18 Mm Thick Hdhmr + Laminated , Finished With A 1 Mm Thick Decorative Laminate On The Topsurface, Anda Balancing Laminatebacking On The Underside Toensure Dimensional Stability. All Exposed Edges Shall Be Sealed With Pvc Edge Banding Or Machine-Finished To Prevent Splinters And Enhance Durability. The Plywood Shall Be Scratch-Resistant, Water-Resistant, Andeasytoclean,Withalightwoodgrainorequivalentfinishasapproved.Thesupportingframeshallbefabricatedframeofsquare Hollow Section40mmx40mmx1.6Mmss 304 Grade Stainless Steel In Polished Finish.Theselegsshallbesecurelyweldedtothe Undersideofthebenchtopframe.Thebenchshallincluderubbershoesatthebottomofeachlegtopreventfloordamageandensure Stability.Thedesignshallprioritizeusersafetywithnosharpcornersoredges.Thebenchmustbestructurallysoundandcapableof Supportingauniformlydistributedloadofatleast250kg.Allmaterialsusedmustconformtorelevantisstandards,Andthefinished Product Should Be Free From Burrs, Dents, Or Deformities. , Boys And Girls Dormitories , Beds/ Partition Wall In Dormitory Hall, Rcc Bed (900Mmx1800mm) With 18Mm Hdhmr With With 1Mm Matt-Finish Laminate On Top Of Bed Shall Be Provided. Rcc Partition Wall Cladding Must Be Using 8Mm Plywood Covered With 2Mm Matt-Finish Laminate All Around Corners And No Sharp Edges. With All Fixtures Fasteners Adhesives Etc All Inclusive Required For Fixing. , Staff Quarters , (A) Rooms Wardrobe , Fabricating, Supplying, Fixing & Placing In Position Wardrobe Of Size 900 (L) X 1800 (H) X 600 (D). The Unit Comprises Of Wardrobe Including, A Single Drawer, Hanger Rod,In Pre Laminated Hdhmr Board Of 18Mm Thickness For Carcase And Shutters With 12Mm Thick Back Panel And Drawer Bottom. 2Mm Edge Banding Matching The Laminiate Selected, Including All Necessary Fixing Arrangement, Glues, Screws, Magnetic Catchers, Handles, Flush Handles For Drawer In Wardrobe, Hinges, Telescopic Sliding Channel For Drawers, As Required. Colour May Vary As Per Approval Of Engineer-In-Charge.[94 Room X 18 Sqft = 1692 Sqft] , (B) Modular Kitchen , (I) Fabricating, Supplying, Installation, Fixing & Placing In Position The Entire Modular Kitchen Under Storage Counter (Height 850Mm) As Per Drawing. The Unit Comprises Of Cabinets, Shutters, Profile Handles, Accessories, Hardware, Glass Etc,. Basic Structural Framing With 18Mm Thick Prelam Hdhmr For Shutters And Carcase And Its Divisions And 12 Hdhmr For Back Panel And Bottom Panel Of Drawers As Mentioned In The Drawing, Edge Banding To Match The Color Of Selected Laminate, Including All Necessary Fixing Arrangement, Nails, Glues, Screws, Magnetic Catchers, Handles, Handles Of Required Lengths As Per The Width Of The Drawer, Shutter, Cabinet, Soft Closing Hinges And Soft Closing Innotech Sliding Channel For Drawers Along With Railings If Required, Fixing The Furniture To The Wall Or To The Floor As Required. All Works Like Fixing The Unit To The Floor Or Wall, Laminates Of Specified Thickness Complete,Other Required Hardware Are Included. Black Granite Countertop, Machine-Cut, Mirror Polished, And Neatly Grouted, Installed True To Level With Proper Support Structure. All Framework Intermittently For Support And Strength, All Details To Be Followed As Per The Drawings And Design Provided And Any Addition Required In Detail Should Be Incorporated In The Shop Drawing To Ensure Complete Functionality And Durability As Intended.All Hdhmr/Plywood And Board Will Be Both Sides Laminte. Nothing Extra Will Be Paid. All Cooridnation Works Based On Civil Dimensions, Integration Of Various Appliances For The Purpose Of Electrical Wiring Are To Be Considered In This Item. Appliances Like Chimney,Sink Etc To Be Paid Seperatly. Natural Stone Counter Top Stone Will Be Provided By The Client And Fixing Will Be Done By The Client Appointed Agency. However Coordination Will Be The Responsibility Of This Contractor. +B69 (Ii) Fabricating, Supplying, Installation, Fixing & Placing In Position The Entire Modular Kitchen Over Head Storage Counter (Height 600Mm) As Per Drawing. The Unit Comprises Of Cabinets, Shutters, Profile Handles, Accessories, Hardware, Glass Etc,. Basic Structural Framing With 18Mm Thick Prelam Hdhmr For Shutters And Carcase And Its Divisions And 12 Hdhmr For Back Panel And Bottom Panel Of Drawers As Mentioned In The Drawing, Edge Banding To Match The Color Of Selected Laminate, Including All Necessary Fixing Arrangement, Nails, Glues, Screws, Magnetic Catchers, Handles, Handles Of Required Lengths As Per The Width Of The Drawer, Shutter, Cabinet, Soft Closing Hinges And Soft Closinginnotech Sliding Channel For Drawers Along With Railings If Required, Fixing The Furniture To The Wall Or To The Floor As Required. All Works Like Fixing The Unit To The Floor Or Wall, Laminates Of Specified Thickness Complete,Other Required Hardware Are Included. All Framework Intermittently For Support And Strength, All Details To Be Followed As Per The Drawings And Design Provided And Any Addition Required In Detail Should Be Incorporated In The Shop Drawing To Ensure Complete Functionality And Durability As Intended.All Plywood And Board Will Be Both Sides Laminte. Nothing Extra Will Be Paid. All Cooridnation Works Based On Civil Dimensions, Integration Of Various Appliances For The Purpose Of Electrical Wiring Are To Be Considered In This Item. Appliances Like Chimney,Sink Etc To Be Paid Seperatly. Natural Stone Counter Top Stone Will Be Provided By The Client And Fixing Will Be Done By The Client Appointed Agency. However Coordination Will Be The Responsibility Of This Contractor. Colour May Vary As Per Approval Of Engineer-In-Charge. , I) King Size Bed: The King-Size Bed Is Constructed Without A Storage Box And Features Robust Materials For Lasting Durability. The Frame, Including The Side Panels And Footboard, Is Made From 18 Mm Thick Pre-Laminated Engineered Wood With A Melamine Finish, Offering A Clean, Wood-Textured Look. The Mattress Base Is Fabricated Using 18 Mm Bwp-Grade Plywood, Fully Edge-Banded To Prevent Warping And Moisture Damage. The Overall Dimensions Of The Bed Are 2040 Mm In Length, 1980 Mm In Width, And 300 Mm In Height To The Base, Providing Ample Support For A Standard King-Size Mattress (1980 Mm × 1830 Mm). The Headboard Stands 800 Mm Tall And Is Divided Into Two Sections. The Lower Portion Is Made Of Laminated Board, While The Upper Section Includes A Cushioned Panel With 50 Mm Pu Foam, Upholstered In Stitched Premium Leatherette For Added Comfort And Aesthetics. The Entire Unit Features A Light Oak Melamine Finish To Match. The Bed Is Supplied In Knock-Down Condition With All Necessary Hardware, Including Cam Locks, Screws, Dowels, And Angle Brackets. Assembly Is Straightforward With Reinforced Metal Corners For Added Strength. , Ii) Side Table:The Side Table Is Constructed Using High-Grade Plywood And Finished In A Light Oak Melamine Laminate For A Clean, Natural Appearance. It Features A Compact Form With Overall Dimensions Of 400 Mm (Width) × 400 Mm (Depth) × 490 Mm (Height). The Unit Has Two Lockable Equally Sized Drawers, Both Equipped With Soft-Close Telescopic Channels For Smooth, Quiet Operation. The Design Incorporates A Handle-Less Front With A Finger-Pull Recess At The Top Edge Of Each Drawer For A Sleek And Minimalist Look. Both Drawers Are Lockable, Enhancing Functionality And Security For Personal Storage. The Surface Is Fully Laminated For Protection Against Wear And Easy Maintenance. , Iii) 06 Seater Dining Table— The Dining Table Shall Be Of Solid Sheesham Wood (Kiln-Dried And Chemically Treated) With Overall Dimensions 1500 Mm × 900 Mm × 760 Mm And A Tabletop Thickness Of Approx. 25 Mm; The Apron Shall Be 25 Mm Thick And Legs Shall Be 80–100 Mm Square In Section, All Joined Using Mortise-And-Tenon Or Equivalent Reinforced Joinery. A Clear Tempered (Toughened) Glass Top Shall Be Provided To Cover The Wooden Top: 10 Mm Clear Toughened Glass Is Recommended For This Size, With Machine-Polished Edges (Flat Polish Or Small Bevel) And Corner Radii For Safety. The Glass Shall Be Supplied Cut To Size For A Nominal 2–3 Mm Reveal From The Top Edge Of The Apron (Or As Directed), Packed Separately And Fitted On Site. Glass Fixing Shall Use Non-Marking Neoprene/Rubber Support Pads (Minimum 6 Pads Per Table) And Anti-Slip Silicone Adhesive/Dots To Hold The Glass In Place Without Damaging The Wood; Stainless Steel Decorative Clamps May Be Provided Where A Visible Fixing Is Required But Should Not Bear The Primary Load. Finish Of The Wood Shall Be A Low-Sheen Natural Polish Or Clear Lacquer; Table Shall Be Supplied Knock-Down With All Required Fasteners And Instructions For On-Site Assembly And Final Glass Placement. The Glass Top Protects The Wood From Scratches, Heat And Spills, Gives A Sleek Aesthetic, And Makes Cleaning Easier (Wipe With Standard Glass Cleaner While Avoiding Aggressive Solvents On Adjacent Wood Finish). Chairs 06 Nos — Each Chair Shall Be Of Solid Sheesham Wood, Finished To Match The Table’S Low-Sheen Polish, With A Slatted Backrest And Straight Legs. Seat Height Shall Be 450 Mm From Finished Floor Level. Seats Shall Be Cushioned With Medium-Density Foam And Fully Upholstered In Durable Synthetic Leather (Leatherette) In A Neutral Tone; Foam Shall Be Supported On A Plywood Board Beneath The Cushion. Chair Dimensions (Seat Width/Depth/Backrest Height) And Leg Sections Shall Be Robust To Match The Table And Shall Be Supplied Knock-Down With Necessary Assembly Hardware. Upholstery Shall Be Stain-Resistant And Maintainable (Spot Cleanable); Wood And Upholstery Care Instructions Shall Be Provided With Each Unit. , (Iv) Sofa Set , (A)Sofa Foyer One Seater Size In Mm - 880(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (B)Sofa Foyer Two Seater Size In Mm - 1460(L) X 755(D) X 750(H) Seatwooden Structure Uphostered With Leatherite & Hd Foam 32 Softy. Ss Chrome . Sofa S57 Max. Height750mm .The Rounded Armrests Provided Sleek And Stylish Lookwith The Pillowed Back .Arm Rest Leatherite Covered With Solid Wood Structure . Understructure Made By Solid Wood Structures With Heavy Quality Spring For Maximum Comfort , Taper Type 25Mm Round Spiral Spring. Legs Round Pipe Chrome Plated Legs. Understructure Made Of Base Frame Strongly Jointed Wooden Plywood Parts.3 Seater Sofaseat Height From Ground460mm .3 Seater Sofa 2020W X 760D X 750H, 2 Seater Sofa 1450W X 760D X 750H . Seat Height From Ground 460Mm&1 Seater Sofa 880W X 760D X 750H . 100Mm High Legs. , (C) Coffee Table The Coffee Table Measures 900 Mm (W) × 600 Mm (D) × 450 Mm (H) And Features A 10 Mm Thick Clear Tempered Glass Top And Shelf Supported On A Stainless Steel 202 Frame Made Of 40×40 Mm Square Tubes With A Mirror-Polished Finish. All Joints Are Argon-Welded, Ground, And Buffed For A Seamless Look. The Lower Glass Shelf For Additional Storage, And Rubber Pads Or Level Adjusters Are Provided At The Base For Stability And Floor Protection. The Table Combines Modern Design, Durability, And Elegant Finish, Making It Ideal For Offices And Reception Areas.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Arunachal Pradesh View Result →
41.
Agriculture #9379144 Technical Bid
Supply Commissioning And Installation Of Gc For N2o , Application: Greenhouse Gases I.E. N2o, Co2 And Ch4 Estimation From The Ambient Air And Soil Gases Samples Very Precisely Using Gc , Gc Mainframe: , Gas Chromatograph (Latest Model) With Head Space Sampler (Hss) Interface For Greenhouse Gases Analysis With Simultaneous Detection Of Greenhouse Gases In Air Samples Air Samples [E.G. Nitrous Oxide (N2o), Carbon Dioxide (Co2), Methane (Ch4)] With Suitable Columns And Provision For Automatic Injecting Sample Having The Following Lower And Upper Detection Limits , · Nitrous Oxide (N2o): = 30 Ppb To 10 Ppm (Mdl = 30 Ppb Or Better) , · Carbon Dioxide (Co2): 0.4 Ppm To 0.2% (Mdl = 0.4 Ppm Or Better) , · Methane (Ch4): 0.2 Ppm To 20% (Mdl = 0.2 Ppm Or Better) , Gas Chromatograph That Provides Superior Performance. , · It Have Easy Access To Maintenance And Service Modes System Interface. , · It Have Retention Time Repeatability <0.008 %; Area Repeatability <0.5 % Rsd. , · It Have Hands Free Leak Check And Retention Time Locking. , Column Oven , · Column Oven Can Accommodate Two Column With A Temperature Range From +5°C To 450 °C. , · Set Point Resolution Of 0.1 °C Or Better; , · Must Support Minimum 20 Ramps Or More; , · Maximum Temperature Ramp Rate Of 120 °C / Min Or Better. , · Oven Cool Down From 450 °C To 50 °C Must Be In 4 Min Or Less With Built-In Programmable Oven Cool Down Rate Readily Available To Cater For Columns Of Different Stability. , · Temperature Stability For < 0.01 °C For A 1 °C Ambient Change, Ensuring The Maintenance Of Oven Internal Temperature With Respect To External Fluctuations. , Column Selection: , · Employ A Column Specially Designed For Separating Nitrous Oxide (N2o) From Other Atmospheric Gases Such As A Porapak Q Or Molecular Sieve Column. , · Suitable Columns: 2 Numbers Each To Analyze The Greenhouse Gases. , Pressure/ Flow Control Pneumatics: , · Microprocessor Based Latest Version Gc (With Advanced Pneumatics, Msd Iso 9001 Certified With Large Graphical Lcd Display To View Chromatogram And Built In Gc System Check And Self-Diagnostic Function). , · System Must Have Epc/Afc/Ppc Control For All Injectors And Detectors With Single Point Control Via Software. , · It Must Have The Capability To Install Up To Eight Epc/Afc. , · Automatic Leak Testing, System Must Have Automatized Pneumatic Controls For All Gases Like Carrier Gas, Make Up Gas, Detector Gas, Etc. , · Pressure Set Point And Control Precision To 0.001 Psi. Pressure/Flow Ramps Must Be Minimum Three. , · Future Upgradability Should Be Possible For Other Detectors. , · Head Space Transfer Line Must Be Fully Integrated With Mainframe. , · Complete System Can Be Fully Controlled By Pc Software , · Carrier And Makeup Gas Must Be Selectable To He, N2, H2 And Argon/Methane. , · System Must Have Factory Fitted & Tested For Back Flushing & Column Switching/Changing Along With The System Software Acquires Chromatograms From All The Detectors Simultaneously With One Injection Only. , Auto Sampler: , Head Space Sampler (Hss): , • Typical Area Repeatability <0.7% Rsd. , • Typical Carryover <0.0001%. , • Auto Injector Must Be With Minimum 48 Vials Capacity Or More. , • Overlapping Up To 12 Vials To Maximize Throughput Or Better. , • Multiple Headspace Extraction Mode With Minimum 100 Extractions Per Vial Or More. , • In-Build Vial Shaker. , • Gc Column Selection From 50 To 530 ?M. , • Compatibility With Headspace Vials Of 10 Ml, 20 Ml, And 22 Ml Sizes With Unrestricted Use Of Different Vial Sizes Within A Single Sequence. , • All Temperature Zones (Oven, Valve And Loop, Transfer Line) Have Set-Point Increments In 1 °C With 0.1 °C Resolution For Actual Temperatures. , • Oven Temperature: Ambient +5 °C To 300 °C Or Better , • Valve And Loop Temperature: Ambient +5 °C To 300 °C Or Better , • Transfer Line Temperature: Ambient +5 °C To 300 °C Or Better , • Vial Pressurization Must Be Fully Controlled By The Included Epc/Afc/Ppc. , • Pressure Setpoints Must Be Adjusted By Increments Of 0.001 Psi. , • Flow Setpoints Must Be Adjusted By Increments Of 0.01 Ml/Min. , • Separate Injector Unit For Headspace Sampler , • Should Have A Closed Sampling Design Without Exposure To Atmosphere Or Ambient Temperature. System Must Be Syringeless To Avoid Exposure To Atmosphere/Contamination. System Must Be Controllable Through Software Only. , • Headspace Should Have Automatic Leak Check, Power Saving And Gas Saving Facility. , Browse Interface: , · Touchscreen Browser Interface , · Mobile Access Features/ Remote Control , Upgradability: Quoted Gc Must Be Upgradable With Single/Triple/Qtof/ Quadruple Mass Spectrometer In Future. , Valves And Catalyst: , Suitable Automatic Gas Sampling Valves, Column Switching Valves & Injecting To Column For Desired Gas Analysis. All Gas Control Should Be Epc/Iec/Afc. , • Gas Sampling Valve-1 , • Column Isolation Valve-1 , • Other Valve-2 , • Nickle Catalyst-1 , Injector , · Multi-Port Gas Sampling Valve With Auto Injector Facility From Tedlar Bag Or Gas Tight Syringe And Manual Gas Sample Injecting Facility Should Be There. , · Suitable Injector For Headspace , Detectors : , Flame Ionization Detector (Fid): , · Minimum Detectable Level (For Tridecane): <1.2 Pg C/S Or Better , · Minimum Temperature Should Be 450 °C Or More. , · Linear Dynamic Range >107 Or Better , · Data Rates Up To 1,000 Hz Or Better. , · Must Have The Flameout Detection And Automatic Reignition Capability. , · Fid With Methanizer, Detector Must Be Compatible With All Colums: Packed, Capillary And Molecular , · Able To Control Up To 3 Channels Of Gas, I.E. H2, Make-Up And Air (With Electronic On/Off). The Control Range Are To Be For Air: 0-500 Ml/Min, H2: 0-100 Ml/Min, And Make Up Gas (N2 Or He): 0-50/ 100 Ml/Min. , Electron Capture Detector (Ecd): , · Minimum Detectable Level: <3.8 Fg/Ml Lindane Or Better , · Minimum Temperature Should Be 400 °C Or Better. , · Linear Dynamic Range >5 × 104 With Lindane Or Better , · Data Rates Up To 500 Hz Or Better. Detector Must Be Compatible With All Columns: Packed, Capillary And Molecular , · Able To Supply A Constant Flow Make-Up Gas (N2 Or Ar) For The Inertness Of Ecd Chamber With Flow Control Of 0-200 Ml/Min. , Customizable Specifications: , · Manual Gas Sample Injecting Facility Should Be There. , Data Management And Acquisition System (Pc & Printer): , · Latest Branded Pc With Licensed Ms Office Package, Antivirus, Compatible Pc For Software , · Intel Core I5 Processor, 3Ghz Or Better , · 8.0Gb Ddr Ram Or More , · 1 Tb Hard Disk Storage, 128 Gb Ssd Or More , · At Least 24” Lcd Monitor , · Latest Window Operating System (Professional-10/11) , · At Least 3/4 Lan And 4/5 Usb Port Availability Or Better , · Wireless Keyboard & Mouse , · Laserjet Black & White Printer , Software System: , · Latest Operating System Compatible Workstation, Original Window-Based Licensed Software From The Same Manufacture Only Which Includes Complete Gc Control, Multi-Channel Real Time Chromatographic Data Acquisition And Post-Run Analysis. , · It Should Also Include High Speed Data Acquisition And Bulk Analysis Compatibility, Full Qualitative & Quantitative Processing Functions, Multi-Function Compatibility, Audit Trail, Validation Assistant, System Suitability, Qa/Qc Functions, All-In-One File Configuration For Easy Data Transfer, Customized Report Generator, Networking Capability, Data Management Etc. , · Software Performing Data Analyses At Least As Per Din/Iso/Us-Epa, Calibration, Blank Correction, Data Import, Export, Handling And Reporting, Quality Control Protocols, Computer Based Training. , Necessary Consumables/Accessories: , • Headspace Vials With Caps, Septa And Storage Box (20 Ml)- 200 Quantity , • Headspace Vial Crimper- 1 Quantity (Electronic Which Has Rechargeable Battery Along With Acessories) , • Headspace Vial Decapper- 1 Quantity (Electronic Which Has Rechargeable Battery Along With Acessories) , • Nickel Catalyst (1 Quantity); Tedler Bags (10 Nos) , • A Vial Evacuation System To Evacuate = 10 Sample Vials At A Time. , • Fid Jet- 1 Quantity , • Greenhouse Gas Checkout Sample-1 Quantity , • 12Ft 1/8 2Mm Hayesep Q 80/100 Um- 1 Quantity , • 6Ft 1/8 2Mm Hayesep Q 80/100 Um- 1 Quantity , • Fused Silica Column Deactivated -0.530Mm X 1M- 1 Quantity , • A Purging System To Purge The Vial/Tedlar Bags. , • Hdspc Al Sfty Crmp Cap, Ptfesi, 20 Mm, 100 Pk , • 20Mm Silver Alum Safety Crimp Cap 100 Pk (01 No.) , • 20Mm Tan Ptfe/White Silicone Septa, 100 Pk (1 No.) , • Vial, Hs, Screw, 20 Ml, Clr, 100Pk (01 Nos) , • Hdsp Cap 18 Mm Magnetic Ptfe/Silicone Septa 100Pk (05 Nos) , • Vial, Hs, Crimp, Fb, 20 Ml, Clr, Cert, 100Pk (01 Nos) , • Ergonomic Manual Crimper For 20Mm Caps (01 No.) , • Ergonomic Manual Decapper For 20Mm Caps (01 No.) , • Gastight Syringes (Ptfe Lucerlock With Needle) Of 500 ?L And 1000 ?L (1 Nos Each) , • Gastight Syringes (Ptfe Luerlok Syringe) Of 25 Ml And 50 Ml (1 Nos Each) Along With Three Needles With Each Syringe. , · Calibration Gas Cylinders: -Calibration Gas Cylinders (10 L Each) Along With Double Stage Ss Regulators For Each Cylinder With Below Concentrations: , N2o (Ppb)Co2 (Ppm)Ch4 (Ppm) Cylinder 1100350 1.5 Cylinder 23001000 6.0 Cylinder 3 1000 20001000.0 , Accessories For Gc Operation: , Gas Cylinders: , • Complete Gas Supply System With 47L Capacity Gas Cylinders For Each Of H2, H2, Zero Air And Ar (95%) + Ch4 (5%) Gas Mixture. , • Hydrogen Gas Cylinder With Gas Purification Panel And Double Stage Regulator- 1 Quantity , • Nitrogen Gas Cylinder With Gas Purification Panel And Double Stage Regulator- 1 Quantity , • Zero Air Gas Cylinder With Gas Purification Panel And Double Stage Regulator- 1 Quantity , • 5% Ch4 In 95% Argon Cylinder For ?Ecd Makeup Gas , • Double/Single Stage Gas Regulators And Gas Purification Pane; With Complete Tubing And Gas Regulation System For All 4-Gases: H2, H2, Zero Air And Ar (95%) + Ch4 (5%) Gas Mixture. , Ups: Branded Compatible Online Ups Of 5Kva With 30 Min. Backup Or Better. , Air Conditioner (Ac): Branded 1.5 Ton Split Ac With Timer , Power Requirement: 220/240 Volt; 50/60 Hz , Warranty: , · Onsite Warranty One Year On Instrument Including Pc, Printer And Ups. , Safety & Regulatory Certificate: , · The System Should Accompanied With Conformity Certificate. , · Quoted Model System Should Be Latest With Good After Sales Support And Should Have Iso 9001 Approval Certificate. Model Must Be Iso/Ce Certificate Or Other Relevant Certificate. , Pre-Installation Requirements All The Necessary Pre-Installation Requisites Required For The Complete Installation Of The System. , Note: , 1. Original Brochure Of The Quoted Model Should Be Submitted. Specification Claimed For Each Component Must Be Supported By Printed Literature Of The Company. The Submitted Printed Literature Must Also Be Available On The Oem Website For Cross-Checking The Specifications And Its Compliances. , 2. Country Of Origin And Manufacture Should Be Mentioned. , 3. Quoted Model Must Be Factory Fitted With Valves, Column & Detector And Tested For Greenhouse Gas And Trace Gas Analysis , 4. Offered Specs Should Be Mentioned In The Original Detailed Technical Catalogue Of The Quoted Model. , 5. Original Brochure Of The Firm To Be Supplied And Same Should Be Reflected In The Website Of The Firm. , 6. Provide Compliance Statement Sheet With Technical Bid And If There Is Any Deviation In Above Mentioned Specifications Should Be Clearly Highlighted In Remarks. , 7. Quoted Model System Should Be Latest With Good After Sales Support And Should Have Iso 9001 Approval. , 8. Entire System Should Be Provided Directly By The Manufacturer And In No Case Local Components Will Be Accepted Except Laser Printer, Pc And Ups Which Can Be Provided From Local Sources. Technical Bids With Compatible Modules From Another Manufacturer Will Not Be Evaluated. , 9. Minimum 10 Installations Of Quoted Model In National R&D Institutions For The Past 5 Years With Supporting Documents Of Purchase Orders/Latest Service Reports/Installation Reports To Be Enclosed. , 10. Original Software For The Equipment Should Be Provided And Free Up-Gradation Of Software During The Warranty Period. , 11. Performance Certificates Of The Quoted Model To Be Attached , 12. Anything Extra Required For Installation Should Be Quoted Along With Instrument. , 13. Warranty And Maintenance , A) The Complete Instrument Should Be Under Warranty At Least For A Period Of One Year From The Date Of Installation. , B) In Case Of Breakdown During The Warranty Period, A Competent Service Engineer Of The Supplier Should Make As Many Visits As Are Necessary To Rectify The Problem And Replace The Faulty Parts, Without Any Liability Of Cost. But It Should Be Repaired Within 72 Working Hours From The Date And Time Of Complaint Lodged By The User. , C) Annual Maintenance Contract (Amc) And Comprehensive Maintenance Contract (Cmc) Quote The Cost Of Onsite Annual Maintenance For At-Least Three Years After Warranty Period (Optional). , 14. Spare Parts The Supplier Of The Instrument Must Confirm In Writing That The Spares For The Entire Instrument Will Be Available For A Period Of At Least 7-10 Years After The Model Of Equipment Supplied Has Been Phased Out. For Frequently Required Spares, There Should Be Adequate Inventory With The Indian Agency. , 15. List Of Service Staffs And Centers Available In India. , 16. On-Site Installation Should Be Provided Free Of Cost. Onsite Training/Demonstration To The Scientists To Be Provided At No Additional Cost. , 17. Manual: One Set Of Operating Manual And Service Manual Including Detailed Drawings And Circuit Diagrams (In English) Should Be Provided With The Instrument. , Quotations Should Be Complete In All Respects At First Instance; Incomplete Quotations And Quotation Of Firms, Who Merely Cut Paste Specifications From Tender Document Are Liable To Rejection. , Gst, If Applicable , Other Charges , Total Bid Price Including All Taxes And Other Charges , (Total Bid Price In Rupees(In Figures)----------------------------------- , (In Words)---------------------------------------------------------------------------------- , Signature Of Bidder
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Rajasthan View Result →
42.
Public Administrative Department #9243419 AOC
Supply Of Medical Equipment And Instruments ( 2023-2024, 2024-2025 Two Years ) , Fogger Machine For Fumigation & Disinfectant Tasks ( High Power Jetain Watts Inpleallarfansystem 600 Watts-5 Ltr Tank Capacity , Boyles Appratus ( 2 N2o Provision Safty N2o Cuttoff, O2 Failure Alarm ) :- Specification :- • Anesthesia Work Station With Vantilator & Veporiser ( Qty-01 ) • Diamention:- 1356Mm X 845Mm X 620Mm • Two Gas Machine With Oxygen & Nitrus Oxide With Each Yoke • Vantilator Should Be Minium 8 Inch Touch Screen With Tidal Volumn 20Ml To 1500Ml, Suports Vantilator Mode Iipv, Pcv, Simv-Vc, Manual, Ps / Cpap ( With Apena Backup, Standby ) . • Vanylation Monitaring:- Pressure:Ppeak, Pplat, Peep, Pmean • Volumes:-Mv, Vt Respiratory Freq. Compliance Etc • Waveform Display P-T, F-T, V-T • Sutable For Adult &Paed. • Should Be Double Tube Machanical Flowmeter For Each Gas . • Suport Two Veporiser Mount & Two Drawers • It Should Be Ce Certified. • Alaram -High / Low Airway Pressure, High / Low Minute Volume, Power Failuer, Oxygen Supply Failure, Apnea, High / Low Fio2 Specification :- ? Anesthesia Work Station With Vantilator & Veporiser ( Qty-01 ) ? Diamention:- 1356Mm X 845Mm X 620Mm ? Two Gas Machine With Oxygen & Nitrus Oxide With Each Yoke ? Vantilator Should Be Minium 8 Inch Touch Screen With Tidal Volumn 20Ml To 1500Ml, Suports Vantilator Mode Iipv, Pcv, Simv-Vc, Manual, Ps / Cpap ( With Apena Backup, Standby ) . ? Vanylation Monitaring:- Pressure:Ppeak, Pplat, Peep, Pmean ? Volumes:-Mv, Vt Respiratory Freq. Compliance Etc ? Waveform Display P-T, F-T, V-T ? Sutable For Adult &Paed. ? Should Be Double Tube Machanical Flowmeter For Each Gas . ? Suport Two Veporiser Mount & Two Drawers ? It Should Be Ce Certified. ? Alaram -High / Low Airway Pressure, High / Low Minute Volume, Power Failuer, Oxygen Supply Failure, Apnea, High / Low Fio2 , Baby Radint Warmer With Inbuilt Led Phototherapy Unit • Should Be Micro Controller Base, • Should Control Servo Skin , Pre Warm & Manual. • No Need Of Calibration Required For Temprature Prob. • Heater Modual Should Rotates 90° To Both The Sides To Facitate. • Phototheapy Light Sourc At List 24 Blue Led, 3 White Led. • >Irradiance 45 Uw / Cm2 / Nm At A Distance Of 30Cm. • Should Be Compatible For X-Ray Procedure. • Should Be Iso 13485:2016 , Standard Examination Couch. Size: L 1830Mmxw575mmxh850mm Frame Crca Rectangular Tube. Crca Sheet Cabinet. One Cabinet &One Drawer With Lock Sliding Step Stool &Writing Pad. 100Mm Thick Reversible Foam Mattress. Stainless Steel. , Gyanec Examinaton Table: Size L1820mmxw560mmxh815mm. Frame Bend Press Crca Sheet Top With Back Rest Adjustable On Ratchet. Perinial U Cut At Foot End .Crca Tubular Legs .Step Stool &Mattress .Lithotomy Bars With Stirrups. Stainless Steel. , Myo’S Trolley Tray Size- 410Mmxlx560mm W Stainless Steel, Height Adustment From 890 Mm To1400 Mm, 50Mm Diameter Wheels , Seating Arrangement: Four Seater 72” Length. , Adult Weighing Machine , Adult Weighing Machine , Instrument For Paediatric And Neonatalweighing Scale For Neonatal , Oxygen Hood, S And M, Sector 0 Each Including Conneting Tubes , Resucitor Hand- Operated Nenonatel- 250 Ml , Larygoscope Hand- Operated Neonatel – 500Ml , Larygoscope Set, Neonatal , Suction Machine Foot Operated , Neonatal Pulse Oxymeter , Electronic Weighing Scalefor Baby 10G<5 Kg , Stethoscope For Neonates- Binaural , Electronic Spygmomanometer , Electronic Mobile Light Examination Mobile ( 220-12 V ) , Vinyl Coated Measuring Tap – 1.5 M , Basic Kidney Tray- Stainless Still ( 825 Ml ) , Infusion Stand Withdoubblehook On Castors , Glucometer With Sugerstrips , Sugerstrips , Nebulizer Pulmoaid Type Heavy Duty. Isi Mark. , Re-Breathing Bag With Valve .05 Ltrs. , Re-Breathing Bag With Valve 2 Ltrs. , Laryingo Scope With Ambubag Silicon Caff White Adult. I.S.I Marks. , Electric Sterilizer Stainless Steel Medium Sizes Marks I.S.I , Plaster Cutting Scissor , Plaster Cutting Machine Electric , Plaster Spreader , Silicon Ambubagwith Tubing, Mask , Nebulisation Mask Pediatric , Nebulisation Kit Big , Nebulisation Kitsmall , Needle And Syringe Destroyer ( Hub Cutter ) , Ilr Refrigeratorwiththermometer Ice Lined Refrigerator With Dual Interior Layer Design With Built In Ice Packs To Maintain The Temperature Of The Refrigerator Double Walled With Inner Chamber Made Of S.S. And Outer Of Thick Pcrc Sheet Duly Enamels Painted. Temprature Range From Ambient To -2°C To 8°C Is Achieved By Hermertically Sealed Compressor. Body Mounterd On A Study Angle Iron Frame And Is Mounted Orcaster Wheels. Unit Is Fitted With Solid State Digital Tempreatureindicator- Cum-Controller 6 Cuff. ( 180 Liter ) , Tunning Fork , Knee Hammer S.S. Handle , Instrument &Machines. For Dental Department. Electro- Surgical Cautatory Machine For Dental Use Only Coltence-Valdent Type , Air Rotor Hand Pieces. ( Kavo / Nsk ) , Composite Material Kit. ( Ivoclar-Teric M Cream ) Aesthatic Kit ( Shelf Life ) , Apex Locator Root Zx-Ii , Pro-Taper Files Total - ( Sx, S2, F1, S1, F2 ( 25 Mm Length ) , Teflon Coated Composite Hand Instrument Set , Diamond Burs ( Cavity Cutting ) Set ( 1X5 ) , Mummifying Agent , Glass Inomomer Cement Type -Ix Gc Large , Glass Inomomer Cement Type -Ii , Sponge Holder 10 , Suction Tips. ( Silicon ) , Suture Cutting Scissor , Extraction Forceps Sets ( Pedo ) / Routine Forceps Set , Mouth Mirror ( Anti- Fogging ) , Pro Taper Gutta Parch Filling Material- 6% ( F1, F2 ) ( Gp Points ) , Twizzer , Routine Gp Point ( Red, Yellow, Blue ) , Probes , R.C. Help , Rotary Root Canal Smart Systemdensply Sybron Endo , Rvg System With Laptop And Printer , Dental Loops , Dy Cal , Rct- / H-Hand Files 10 / 15 / 20 / 25 , K Files Hand , Rct-Sealer ( Resin Based ) Ah-Plus , Dental X-Ray Machine , R.C. Cal ( Calcium Hydroxide ) , Root Canal K-Files ( Dentsply ) , Gas Torch With Refill Culinders , Root Canal Dressing Cement Premixed , Lingnocaine Inj Gun For Cartridges With Aspiration , Advance Dental Chair With Accessories Programe Attachment Features: 1.Left-Handed Dental Chair 2-Body- Contoured Electrically Operated Dental Chair With Zero Programme With Right Arm Rotatble ; 6- Programmes 3- Led Operating Lilght Having 30000Lux On / Ofanfintensitucinto By Non Touch Sensor With 3 Directional Movement 4- Chair Side Proreclain Spittoon With Auto Water Connection 5- High Ns Low Vcummotorized :Dryco” Susctionwith Auto Drain And Autoflush System 6- Modular ( Delivery Hanging System ) 7- Airotor Points – 2 Nos. 8- Supreme Micromotor 35000 Rmp With Digital Display Of Speed 9- Beecool Turbo Light Cure 10- Ss Instrument Tray 11- X-Ray Viewer 12- Ultra-Sonic 13- Light Cure Attachment Specification • Electric Lly Operable • Seamlessnseat Upholstery • Ceramic Spittonand Tumble • Halogen Light Packing • Dental Chair With Sto • Ceramic Spitton& Tumbler • Halogen Light • Instrument Tray • Foot Control • Two Threewaysyring • Provision For Three Airotor& A Micdromotor , Instrument For Gynecology / O.T Department Hydraulic Opertion Table With All Function Genral Surgery Specification:- 1. Size – 72 X 24 X 30 2. Table Type – Hydraulic 3. Hight Adjustable Range ( In Mm ) – 750-1000Mm 4. Trendelenburg ( Indegrees ) : + / -25 Degree 5. Table Length – 1900Mm 6. Material – Stainless Steel 7. Table Width ( In Mm ) – 520Mm 8. Lateral Tilt – 20 ( Degree Both Side ) 9. Leg Section–90 ( Degree Down Manual ) 10. Head Suction: + / -60 Degree 11. Back Section : + / -60 Degree 12. Floor Locking System- Manual 13. Center Pillar 14. Inbuild Kidney Bridge 15. Five Sectional Radio- Translucent , Hi- Pressure Steam Sterilizer With All Accesessories • Shape & Dimension : Cylindrical To Fit 3 Drums Of Size 15”X 12” • Capacity : 200 Liters. Size: 20” X 39” ( 500Mm X 1000Mm ) • Mode Of Heating : Electrically Heated By Water Immersion Haters Of 18 Kw Electric Load Wired For Operation On 3-Phase 4-Wire, 400 / 440 Volts 50 Hz. A.C. Supply. • Working Pressure : 30 Lbs / Squ. Inch. 2.20Kgf / Cm2 / Adjustable. • Operation Pressure : 2.10+0.15 Kgf / Cm2 ( 30Psi ) / Adjustable. • Operating Temprature : About 134 Degrees Centrigrade And / Or Adjustable. • Exhaust : Fast Exhaust Withing 1 Minute & Slow Exhasut From 7 To 30 Minutes. • Performance : The Sterlizer Should Be Capable Of Performing The Following Operations Constituting One Full Cycle Of Strelization. • Material Consturction : The Material Should Be Ss Sheet Of Grade 304, Jacket, Boiler, End Ring, Piping & Conecctions, Dished Door, Outer Cover • Multiport Valve : To Control The Cycle Of Strelization As Per Bis Standards. • It Should Be Fitted Safety Valve, Ejector, Drying System, Vaccum Breaker, Plug Screen, Tempreature Gauge, Pressure Gage, Compound Gauge, Steam Trap, Strainer And Check Valve • Boiler ( Steam Generator ) : Fitted To Underside Of Jacket. • Tray ( Stainless Steel ) : Provide In The Chamber Of The Suitable Size. • The Whole Unit Should Mounted On A Tubular Pipe Stand With Levelling Flanges And Duly Painted With Best Heat Resisting Epoxy Paint. , Nerve Locator With All Necessary Accsessories , Operatontheators Shadowless Lamp Celling Model ( 4+3 Petal ) Specification:-Should Be A Surgical Light Unit Incorporating The Latest Led Technology Shadowless Operatinh Light Field With The Following Specifications. A ) Shouldd Have Double Colour High Performance Leds With Life Time More Than 50, 000 Hours. B ) Should Be A Dual Dome And The Main Light And Satellite Should Have The Following Specifications C ) Lux Intensity 1, 35, 000 Lux & Satellite 1, 35, 000 Lux Or Above. D ) Light Field Diameter Should Be Above 210 Mm Or Better. E ) Colour Temperature Should Be Between 3800 To 5000 Degree K F ) Colour Rendering Index Should Not Be Less Than 93 G ) Depth Of Illumination Should Not Be Less Than 125 Cm. H ) Lllumination Adjustment 30% To 100% With Field Indication. I ) Led Done Should Have At Least 8 Nos Of Yellow Leds To Achieve Warm White Light For Surgeons’ Comfort. J ) Each Arm Should Have 320-Degree Rotation K ) Linear Intensity Control Should Be Provided On Main As Well As Satellite Done. L ) White And Yellow Led’S Should Have Individual Control With The Help Of Remote Control. M ) Each Dome Should Have 4 Reflectors With Aluminium Body To Dissipate Heat. I. Intensity Of Each And Yellow Light Should Be Controlled By Feather Touch Button On Dome Arm As Well As By Wirless Remote Control. Ii. Total No Of High Intensity Led’S In Each Dome Should Not Exceed 48 Nos.Led Dome Should Have At Least 8 Nos Of Yellow Led To Achieve Warm Whit Light For Surgeons’ Comforts , Operation Theater Shadow Less Lamp Celling Model ( 3 Petal ) [ Specifiction : As Per Same Above Tender Item No. 79 But This Item Is For 3 Petals ] , Stand Lamp Light With Moving System Shadowless K Floor Model , N.S.T. Machine For Gynocology Dept Usespecification :- Trolley Mounted, Table Top, Features, With Hart Rate Monitor, With Printear, Approx. Weight- 3To 4 Kg, Power Consumption < 20 Watt. , Laproscope For T.L. With All Accessories. Specification – Double Puncturescope, Reusable, Refurbished, For T. Gynacoligy Surgery, Material S.S., Led Light Source With Fibre Optic Cable, Veress Needle, Ring Applicatror And Multifunction S.S. Trocar. , Sim, S Speculumset Large, Medium, Small ( Stainless Stell 304 Certificate Is Must ) 1 Set In 3 Nos ) , Digital Fetal Monitor Doppler Specification:- 1. Size - 135Mm X 95Mm X 35Mm 2. Weight – 500Gm Including Battery Weight 3. Display – 45Mm X 25Mmlcd 4. Battery – 2 Pices Of 1.2V Recharable Battery 5. Performance Parameter – Working Frequancy Of Ultrasonic Is 2.5Mhz, ±10% Nominal Standered , 200Mm Distance From Prove, Intergrated Sensitive >_90Db, Display Range 50-230Bpm ( ±2Bpm ) , Tooth Forceps , Delivery Forceps ( Outlet Blade ) , Bipolar Cautary Machine ( Eclipse ) , M.T.P. Suction Machine ( Electric ) Isi Marks , Vacuum Extractor ( Vacuum For Delivered With Silasble Cup- Metallic Cups ) , Cu S Cos Speculums ( Stainless Steel 304 Certificate Is Must ) , Sim, S Speculum Set Of Large, Medium, Small ( Stainless Steel 304 Certificate Is Must ) , Curved Artery Forceps Size-6 ( Stainless Steel 304 Certificate Is Must ) , Vulcellum Forceps , Curved Mosquito Artery Forceps Size-6 ( Stainless Steel 304 Certificate Is Must ) , Needle Holder Size-6 ( Stainless Steel 304 Certificate Is Must ) , Scissors 8 Straight Only , Stout Scissors 8” , Tailor Scissor Big , Curved S.S Scissor Size-6 ( Stainless Steel 304 Certificate Is Must ) , Curved S.S Scissor Size-8 ( Stainless Steel 304 Certificate Is Must ) , Sharp Scissor Size-8 ( Stainless Steel 304 Certificate Is Must ) Stiles ( Curved ) , Curved Sharp Scissor Size- 8 ( Stainless Steel 304 Certificate Is Must ) Stout , Stainless Steel Dressing Drums- Size – 12”X 15” , Stainless Steel Dressing Drums- Size – 9”X 11” , Stainless Steel Dressing Drums- Size – 9”X 9” , Stainless Steel Dressing Drums- Size – 6”X 6” , Stainless Stell Tray With Cover Size- Large , Stainlesstray With Cover Size- Medium , Stainlesstray With Cover Size- Small , Enamal Tray Size – 20”X14 Without Cover , Enamal Tray Size – 13”X15” Without Cover , Instrument For Laboratory Hot Air Oven Specification- Size- 18X18x18 Two Tray 400 Kw, 230V, 4 Amp With Digital Display &Timer. , Incubator Specification- Size- 18X18x18 Two Tray 400 Kw, 230V, 4 Amp With Digital Display &Timer , Binocular Microscope • Provide With Binacular Observation Head Inclined At 45 Degree Rotable Through360 Degree And With Interpupillary Asdjustment. • With Hygenianeye –Pieces 10X, 15X ( Paired ) Achromatic • Objectives: 5X, 10X, 45X &100X Oil Immersion ( Spring Loaded ) Detachable Mechanical Stage. • Magnification : 50X To 150X , Centrifuge Machine- Specification- 16 Tubes With Digital Display &Timer. , Fully Automedrandam Access Clinical Chemistry Analyser With Ups 1- Indian Made 2- 200 Test / Hour 3- Table Model 4- 45 Hard Glass Cuvettes , Semi Auto Biochemistry Analyser Specification :- Mono &Bichromatic Measurement Photometric Range From 0 To 3.0 Od Photometric Resolution Up To 0.0001 Automatic Zero Setting Static Photometer : 340-630 N.M. Wavelength : 340, 405, 505, 546, 578, 630 N.M. Mult-Point Calibration With Graphical Display Levy-Jennings Graph For Quality Control 1000 Test Patient Pesults Storage Peristalitic Pump Aspiration System With Calibration Facility Dual Cuvette System: • Flow Cell Volume-33?L • 10 Mm External Glass / Polystyrene Aspiration Volume From 350 To 999 ?L Tempreature Control At 25°, 30° & 37° C Repeat Measurement By Read Key Collated Report Date Wise, Id Wise ( Alphanumeric ) Inbuilt Thermal Printer Direct Printer Connectivity Through Usb Port Usb Connectivity To Pc Connectivity To External Incubator ( Optional With 16 Position ) , 3 Part Hematology Analysertotal Parameter :22 Total Parameter :22Specification:-The Instrunment Should Be Fully Automated 3-Part Differential With 22 Parameters Offering Automatic Start Up, Shutdown And Sample Analysis I. The Instrument Should Have Cyanide Free / Colorimetric Method For The Hemoglobin Measurement. Ii. The Instrument Should Report Minimum 22 Parameters Including, Wbc, Rbc, Hgb, Hct, Mcv, Mch, Mchc, Plt, Lym#, Mid#, Grant#, Lym%, Mid%, Grant%, Rdw-Sd, Rdw-Cv, Pdw-Sd, Pdw-Cv, Mpv, Pct, P-Lcc, P-Lcrwith Three Histograms-Wbc, Rbc, Plt Iii. The Instrument Should Have A Throughput Of 60 Samples / Hour Iv. The Instrument Should Have Around 50, 000 Searchable Sample Data Storage. V. The Instrument Should Have Colored 10.4” Lcd Touch Screen With Intuitive Menu Icons For Easy Operation Vi. The Instrument Must Have Provision To Incorporate Morphological Findings & Other Test Results Like Blood Group & Rh Type, Esr, C-Reactive And Reticulocyte Counts Etc. In The Instrument Report Printout Vii. The Instrument Should Have In-Built Thermal Printer And 4 Usb Interface For Connecting External Printer, Keyboard, Mouse, Barcode Scanner Viii. The Sample Volume Should Not Exceed 9 ?L In Manual Mode, 20?L In Pre-Dilute & Capillary Mode Each Ix. To Ensure Economy As Well As Better Reagent Inventory Management, The Number Of Reagent Types “That Are Required To Be Connected To The System” For Operation Should Not Xceed 2 Types Preferably ( Excluding Calibrators, Controls And Other Ancillary Reagents That Are Not Required During Each Sample Analysis ) X. Instrument Should Have In-Built Real Time Inventory Management System To Track Usages Of Reagents Xi. Instrument Should Have Facility To Auto-Dispense Pre-Defined Volume Of Diluents For Pre-Dilute Mode Xii. The Company Supplying The Instrument Should Hav A Good Track Record And Excellent Service And Distributor Network All Over India. Cbc, Wbc, Rbc, Hgb, Hct, Mcv, Mch, Mchc.Pdw-Cv, Rdw-Sd’Plt, Mpv, Pct, Pdw-Cv, Pdw-Sd, Plcr, P-Lcc, 3 Part Diff:Lymp% & #, Mid%&# Grab%&# Throught – 60 Test / Hr. Histogram- 3 ( Wbc / Rbc?Plt ) Data Storage 50, 000 Result With Graps Quality Control -500 Files With L-J Grapj X-Bar Analysis , Electronic Shaker For Lab , Manual Vacuum Aspirator With Carman Canula. , Electric Fumigation Machine For O.T Fumigation Isi Mark , Vision Chart With Plain Mirror. , Trial Box Set , A Scan Biometer Technical Specification :- • Transducer Prob:- • Frequencey -10Mhz + 10% • Fixation- Internal Red Led • Modes- Auto + Save • Measurment Range-Manual 15 To 45Mm Axil Length • Display :- 7” Tfl Display With Touch Screen • Power :- 100-240 Vac, 50-60 Hz, 0.3A • Diamention ( Wxhxd ) :- 8”X5.5”X2.5” • Accessories :- • Usb Thermal Print • Foot Swith • Power Adopter ( 5V, 4A ) • Immersion Shell With Tubing , E.N.T. Microscope-With All Accessories Specification. 1 ) Microscope Body Withapochromatic Optic Having 5- Stepmagnification Changer. 2 ) 12.5 Wide Field Eye Pieces With Locking Diopters 3 ) Objectives 200Mm, 300Mm, 40Mm 4 ) Manual Binocular Tube With 200 Mm Focal Length. 5 ) Tiltable Binocular Tube With 200 Mmfocal Length. 6 ) Movable Floor Mounted Red Dot Stand With Locking Casters. 7 ) 100 Watt 12 Volt Halogen Illumination In Stand With Easy Change Overfacility For The Back Up With Halogen Lamp / Or Led. 8 ) Microscopic Arm Should Be Minimum One Meter In Length. , C- Arm Machine With Table 9 Inch With Stabilizer • Mobail Surgical C- Arm With 9 Inch Immageintenicifire With 3.5 Kv High Frequency Genrator, •2 Monitors / 1 Hd Monitor • Pc Work Station, •Ability To Store More Than 1000 Immages • Application For Orthopedic, Urology, Neorology& Gastro Etc , Drill Machine For Ortho Battery Oprated ( Bell / Manman / Metronik ) , Micro Ear Instruments, , Auto Reftractometer ( Computor For Eye Checkup ) Technical Specification :- • This Equipment Should Be Usefull For Finding Out Automatic Reading Refraction &Kerometer. • Auto Alignement Auto Focus. • Retraction :- 1.Sphere Range :- Minus 25 Plus 22 Dioptersapprox 2. Cylinder Range: Zero To Ten Dioptersapprox 3. Axis Range : 1 To 180° • Keratometry • Corneal Curvature Radius 5Mm To 10Mm Aprox • Corneal Refraction 66 To 33 Dioptersaprox • Built In Printer Facilityshould Be Available • It Should Be Able To Gove Reading With Pupil Size Min2mm • Motoritized Table Should Be Supplied To Keep The Auto Refractometer • Digital Display • Usp Backup , Opthalmic Microscope With Assitant Scope & Integrated Hd Camera Attachment Specification :- • Main Microscope • Binacular Tube – Parallel 45°Inclimedbinacular Tube • Objective Lence – F=200Mm • Eye-Pice -12.5X • Magnification Change Type- Drum Type With Five Change • Total Magnifiaction- 3.4X, 5.3X, 8.5X, 13.5X, 21.2X • Field Of Vew –Ø66.2, Ø42.4, Ø26.5, Ø16.6Ø10.6Mm • X-Y Translator ( Option ) Range :±25Mm • Arm Counter- Balance • Length –F=200Mm • Rotation Angle -12.5X • Column Base • Base Diamention -740Mm • Power Unit: • Primary Voltage Ac100-120 / Ac220-240V • Pawer Frq. :- 50-60Hz • Max Pawer Consuption :-180Va , Remote Control Distance Snellen Chart , Ent Opd Instrument Set , Electronic Shaker For Lab , Post Mar-Tum Set ( Mfg By Tuft ) , Slit Lamp , Double Door Cupboard Type Refrigerator Capacity 868 Ltr , Abg Machine , Defibrilator Machine With Standard Accessories ( For Icu Unit ) ? Monophasic Defibrillator ? Lcd Display 5.7’ ? Event Recording ? Thermal Printing Specification: ? Energy Select With External Internal Paddles ? Charge Led Indicator On Front Panel ? Sync Mode Indication Message On Monitor Screen ? Integrated Adult & Paeditaric Paddles ? Ecg Out 1V / Mv ? Defibrilator Protection , Proctoscope Medical Instrument , 3 K.V. Online U.P.S. , 5 K.V. Online U.P.S.
Contract Date: Jun 22, 2026 Contract Value : ₹ 1.05 Crore
Government Departments No of Bidders 15
Maharashtra View Result →
43.
Health and Family Welfare #9019752 Technical Bid
Rate Contract For Iec Material At Deoghar , Items : , Flex With Iron Framing , Flex With Iron Framingwith Installation At Site , Flex With Installation At Site , Permanent Hoarding , Permanent Hoarding , Flex , Flex , Poster , Poster , Poster , Handbill , Pumphlet , Leaflet , Wall Writing , Opinion Form ( Cac ) For Trained Doctors ( 50 Sheet Book ) , Consent Form ( Cac ) ( 100Sheet Book ) , Admission Register Cac 100 Pg Register , Death Register Mdr ( Book Of 50 Pages ) , Maternal Death Notification Format ( Book Of 50 Pages ) , Mdr Investigating Formatsfbmdr ( Book Of 50 Pages Format Each ) , Mdr Investigating Formatscbmdr ( Book Of 50 Pages Format Each ) , Discharge Slip ( As Per Mnh Tool Kit ) , Labour Room Register. , Maa Training Module For Anm & Doctor, Shayia Booklet At Districts Level. , Canopy , Mamta Wahan Call Centre Register , Mamta Wahan Reporting Format , Temperature Log Book Ilr / Df , Planned Preventive Maintenance , Standard Indent Forms , Duelist Cum Tally Sheet , Flex Banner On Immunization Schedule At Hsc And Awc , Afp / Measles Reporting Booklet , Mtc Register , Monthly Hmis Format ( Hsc ) , Hmis Format ( Phc ) , Hmis Format ( Chc ) , Posters , Cards , Medical Record Checklist + Consent Form , Rmnch Counselor Register , Frequently Asked Question , Post Abortion Family Planning - Technical Update , Post Abortion Reference Manual , Reference Manual Injectable Contraceptive , Reference Manual Oral Pills , Standards And Quality Assurance , Medical Eligibility Criteria ( Mec ) English , Medical Eligibility Criteria ( Mec ) Hindi , Leaflet For Sahiya , Leaflet / Pamphlet For Client On Fp & Newer Contraceptives , Follow Up Card Male / Female , Male / Female Sterlization Certificate , Ppiucd Insertion Register , Ppiucd Follow Up Register , Iucd Insertion Register , Iucd Follow Up Register , Sterilization Register , Paiucd Register , Injectable Register , Iucd Follow Up Card , Handbook For Screening Rbsk Children Visible Birth Defects At Delivery Point , Screening Sheet , Referal Form , Poster , Swasthya Karyakarta Guide, Leaflet , Hand Bill , Flex Banner , Poster , Pamphlets , Anti Tobacco Posters , Signages , No Smoking Zone Signages , Family Folder , Personal Health Record Card Communityc Based. , Miking , Nukad Natak , Formats Printing , Mpa Card , Frequently Asked Question , Post Abortion Family Planning - Technical Update , Post Abortion Reference Manual , Reference Manual Injectable Contraceptive , Reference Manual Oral Pills , Standards And Quality Assurance , Medical Eligibility Criteria ( Mec ) English , Medical Eligibility Criteria ( Mec ) Hindi , Senhi Dampati Booklet For Sahiya , Leaflet For Sahiya , Leaflet / Pamphlet For Client On Fp & Newer Contraceptives , Home Delivery Of Contraceptive Register , Pregnancy Test Kit Register , Ensuring In Birth Register , File Folder ( Cover ) , Treatment Continuation And Clinic Condition Record Sheet , Monitoring & Nursing Order Sheet , Admission Sheet ( 4 Pages ) , Discharge Card ( 4 Pages ) , Investigation Sheet , Discharge Note , Referral Notes , Community Follow Up Card , Admission Register , Follow Up Register , Opd Register , Feclity Follow Up Record Book , Antenatal Steroid Use Record Register ( Referral Summary Sheet ) , Newborn Corner Register Including Chc , Handout , Flip Chart , Standy , Invitation Card With Envelop , Prashasti Patra , Tally Sheet , Billboard , Banner , Micrplan Format , Lab Register , T.B. Register , Drug Stock Register , Lab Form , Laboratory Culture & Dist. Register , Treatment Card , Identity Card , Eaq Of Sputum Microscopy , Booklet , Register Printing , Book Printing , Yellow Line Painting , Citizen Charter At Hsc Level , Hoarding ( Flex ) Onanc, Mamta Vahan, Jssk And Jsy , Flex Banner With Iron Framing 4 Anc , Job Aid For Sahiyas And Anm On Line Listing Ofsevere Anemia And Mdr , Wall Paintings On Mamta Vahan And 4 Anc ( Including Pmsma ) Up To Village Level , Posters Focusing On Jssk At District, Hsc And Village Level. , Flex Banner Of Comprehensive Abortion Care ( Cac ) Services. , Posters At On Availability Ofcacserv1ces. , Posters At On Pmsma , Leaflet / Pamphlet On Comprehensive Abortioncareforwomen Tobe Distributedby Sahiya. , Mamta Wahan Stickers , Hoardingflexonpermanent Structure Inctuding All Charges. , Poster On Routine Immunization , Flip Book On Maa ( Sahiya & Anm ) , Hoarding Flex On The Concept Ofmaa And Ndd , Posters On Idcf , Maa Training Module For Anm & , Maa Training Module For Anm , Maa Info Kit Booklet For Sahiya. ( 1 Nos. / Per Shayia ) , Poster , Swasthya Karyakarta Guide, Leaflet , Hand Bill , Rntcp Request Form For Examination Of Biological Specimen For Tb , Rntcp Referral Slip , Tuberculosis Treatment Card , Patient’S Tb Identity Card , Rntcp Pmdt Treatment Card , Rntcp Pmdt Treatment Booklet , Rntcp Pmdt Patient Identity Card , Referraptransfer Form His Treatment , Rntcp Pmdt Referral For Treatment Form , Tb Notification Register , Rntcp Pmdt Treatment Register , Tuberculosis Laboratory Register , Culture And Dst Register , Citizen Charter At Hsc Level , Duelist Cmm Tally Sheet , Flex Banner On Immunization Schedule At Hsc And Awc , Job Aid For Sahiya , Mtc Register , Monthly Hmls Format ( Hsc ) , Hmis Format ( Phc ) , Hmis Format ( Chc ) , Infrastructure Format ( Chc ) , Lnbastructure Format ( Phc ) , Citizen Charter At Hsc Level , Flex Poster On Wifs , Afhc Cards ( Pad ) , Rmnch Counselor Register , Mpa Card , Medical Record Checklist + Consent Form , Leaflet / Pamphlet For Client On Fp & Newer Contraceptives , Handbill , Handout / Brochure , Leaflet / Other , Venial Sticker , Venial Sticker , Chalan Book , Flip Chart , Stock Register , Issue Register , Bill Board , Glow Sign. Board , Form Booket 3 Colored Pages With Perforated ( Triplicate ) Binding ( With Numbering ) , Nukkad Natak , T.V Scroll , Bus / Van
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Jharkhand View Result →
44.
Public Administrative Department #8926809 Technical Bid
Supply Of Books For 9 Nos. Colleges Under Btr. Supply Of Books For 9 Nos. Colleges Under Btr. , Botany Advanced Biology - Vol. I , Botany Advanced Biology - Vol. Ii , Botany Agricultural Biotechnology , Botany Analytical Techniques In Dna Sequencing , Botany Animal Biotechnology , Botany Animal Genetics , Botany Application Of Bioinformatics , Botany Applications In Microbiology , Botany Aquaculture Biotechnology , Botany Biochemical Techniques ( A Laboratory Manual ) , Botany Biochemistry Of Biomolecules , Botany Biochemistry Of Nucleic Acids , Botany Biofuels , Botany Bioinformatics - In 2 Vols. , Botany Bioinformatics : Concepts, Elements & Dimensions , Botany Bioinformatics : Theory & Practice , Botany Bioinstrumentation , Botany Biomolecular Sequencing & Analysis , Botany Biostatistics - In 2 Vols. , Botany Biotechnology & Food Security , Botany Biotechnology & Genetics Engineering , Botany Biotechnology : Principles & Practices , Botany Biotechnology : Tools And Techniques , Botany Biotechnology In 21St Century , Botany Biotechnology In Food Production & Food Security , Botany Cell And Molecular Biology In 2 Vol. , Botany Cell In 2 Vol. , Botany Clinical Microbiology , Botany Clinical Microbiology , Botany Commercial Bioinformatics , Botany Computational Biology , Botany Cryosphere Bioscience , Botany Dairy Microbiology , Botany Environmental Biotechnology , Botany Environmental Biotechnology , Botany Environmental Microbiology , Botany Environmental Microbiology , Botany Environmental Microbiology And Biotechnology , Botany Enzyme Biotechnology , Botany Evolution , Botany Evolution In 3 Vol. , Botany Evolution Of Biotechnology , Botany Evolution Of Man- In 2 Vols. , Botany Food Microbiology , Botany Food Microbiology In 2 Vol. , Botany Fundamentals Of Bio-Chemistry , Botany Fundamentals Of Biofuels , Botany Fundamentals Of Biology , Botany Fundamentals Of Biostatistics , Botany Fundamentals Of The Gene Manipulation And Genomics , Botany Genes In 2 Vol. , Botany Genetic Analysis In Cell Biology , Botany Genetics , Botany Genetics In 2 Vol. , Botany Genomes In 3 Vol. , Botany Genomics & Proteomics , Botany Handbook Of Soil Microbiology , Botany Human Genetics , Botany Immunology : Basic Concepts , Botany Industrial Biotechnology - In 2 Vols. , Botany Industrial Microbiology , Botany Insect Immunolog And Pest Management , Botany Introduction To Bacteriology , Botany Introduction To Biodiversity , Botany Introduction To Bioinformatics , Botany Introduction To Bioinformatics , Botany Introduction To Biotechnology , Botany Microarrary Analysis , Botany Microbial Biochemistry , Botany Microbial Biotechnology , Botany Microbial Diversity : Opportunities And Challenges , Botany Microbiological Techniques , Botany Microbiology And Plant Pathology , Botany Milk Microbiology , Botany Molecular Biotechnology , Botany Molecular Biotechnology In 2 Vol. , Botany Nano-Bioinformatics , Botany Nano-Biotechnology , Botany Physiology And Biochemistrty , Botany Plant Biotechnology , Botany Plant Cell & Tissue Culture , Botany Plant Microbiology , Botany Plant Pathology , Botany Practical Handbook In Life Science & Environmental Science , Botany Practical Prospects Of Ecology , Botany Principals Of Food Biotechnology , Botany Principles Of Biofuels , Botany Problems Of Genetics , Botany Recombinant Dna And Biotechnology , Botany Rna Interference : Problems & Prospects , Botany Textbook Of Genetics And Evolution , Botany Water Microbiology , Chemistry Analytical Chemistry , Chemistry Applied Chemistry - I , Chemistry Applied Chemistry - Ii , Chemistry Basic Organic Chemistry , Chemistry Biochemical Techniques ( A Laboratory Manual ) , Chemistry Biochemistry And Plant Physiology , Chemistry Biochemistry In 2 Vol. , Chemistry Biochemistry Of Biomolecules , Chemistry Biochemistry Of Nucleic Acids , Chemistry Biofuels , Chemistry Bioinorganic Chemistry , Chemistry Biomolecular Chemistry , Chemistry Biomolecular Sequencing & Analysis , Chemistry Bio-Organic Chemistry , Chemistry Bio-Organic Chemistry , Chemistry Chemical Synthesis , Chemistry Chemistry Of Natural Products , Chemistry Chemistry Of Plantlife , Chemistry Chemistry Of Synthetic Drugs , Chemistry Computational Chemistry , Chemistry Electrochemical Biosensors & Biomolecular Assay , Chemistry Electrochemistry , Chemistry Engineering Chemistry ( Pb ) , Chemistry Environmental Chemistry , Chemistry Fundamentals Of Analytical Chemistry , Chemistry Fundamentals Of Bio-Chemistry , Chemistry Fundamentals Of Biofuels , Chemistry Fundamentals Of Chemical Thermodynamics , Chemistry Fundamentals Of Electrochemistry , Chemistry Fundamentals Of Green Chemistry , Chemistry Fundamentals Of Industrial Chemistry , Chemistry Fundamentals Of Inorganic Chemistry , Chemistry Fundamentals Of Material Chemistry , Chemistry Fundamentals Of Molecular Chemistry , Chemistry Fundamentals Of Nuclear Chemistry , Chemistry Fundamentals Of Organic Chemistry , Chemistry Fundamentals Of Photochemistry , Chemistry Fundamentals Of Physical Chemistry , Chemistry Fundamentals Of Polymer Chemistry , Chemistry Fundamentals Of Reaction Mechanism In Chemistry , Chemistry Fundamentals Of Surface Chemistry , Chemistry Green Chemistry , Chemistry Gums And Resins , Chemistry Inorganic Chemistry , Chemistry Inorganic Physical Chemistry , Chemistry Lucid Physical Chemistry , Chemistry Medicinal Chemistry , Chemistry Molecular Modelling , Chemistry Nano Chemistry , Chemistry Nano-Bioinformatics , Chemistry Nuclear Chemistry , Chemistry Organic Compounds , Chemistry Organic Reaction Mechanics , Chemistry Organic Synthesis , Chemistry Organometallic Chemistry , Chemistry Pharmaceutical Inorganic Chemistry , Chemistry Pharmaceutical Organic Chemistry , Chemistry Physical Chemistry , Chemistry Physical Organic Chemistry , Chemistry Polymer In Fuel Cell Technology , Chemistry Principles Of Biofuels , Chemistry Principles Of Chemistry Theory And Practicce In 2 Vol. , Chemistry Principles Of Green Chemistry , Chemistry Qualitative Inorganic Analysis , Chemistry Qualitative Organic Analysis , Chemistry Quantum Chemistry , Chemistry Soil Chemistry , Chemistry Soil Microbiology & Biochemistry , Chemistry Solid State Chemistry , Chemistry Supramolecular Chemistry , Chemistry Teaching Methods Of Chemistry , Chemistry Transition Metal Chemistry , Commerce And Management Accounting & Financial Management , Commerce And Management Accounting For Decision Making , Commerce And Management Art Of Public Speaking In 2 Vol. , Commerce And Management Banking Insurance And Negotiable Instrument Law , Commerce And Management Banking Sector Reforms In India : Problems & Prospects , Commerce And Management Basic Financial Management , Commerce And Management Basics Of Enterpreneurship , Commerce And Management Basics Of Inventory Management , Commerce And Management Brand Management , Commerce And Management Brand Managemnt : People Dont By What You Sell , Commerce And Management Business Environment , Commerce And Management Business Finance & Environment , Commerce And Management Business Process Outsourcing , Commerce And Management Business Process Outsourcing & Call Centre , Commerce And Management Changing Trends In Human Resource Management , Commerce And Management Changing Trends In Management Information System , Commerce And Management Changing Trends In Personnelmanagement , Commerce And Management Changing Trends In Strategic Management , Commerce And Management Communication Management Listning Vs Hearing , Commerce And Management Company Law , Commerce And Management Consumer Behaviour , Commerce And Management Consumer Behaviour , Commerce And Management Contemporary Organisational Behaviour , Commerce And Management Corporate Achievements : Corporate Blunders , Commerce And Management Development Of Research Tools , Commerce And Management Dictionary Of Business Law , Commerce And Management Dictionary Of Humar Resource , Commerce And Management Dictionary Of Management , Commerce And Management Dictionary Of Marketing , Commerce And Management Dictionary Of Personal Finance , Commerce And Management E - Governance : Inititatives & Challenges , Commerce And Management E-Banking , Commerce And Management E-Banking , Commerce And Management Electronic Commerce , Commerce And Management E-Marketing , Commerce And Management Entrepreneurship And Rural Development , Commerce And Management Entrepreneurship Development In India : Issues And Strategies , Commerce And Management Entrepreneurship Management , Commerce And Management Essentials Of Working Capital Management , Commerce And Management Finance & Accounting , Commerce And Management Financial Accounting , Commerce And Management Financial Management , Commerce And Management Financial Management , Commerce And Management Financial Management And Instruments , Commerce And Management Financial Management Of College Libraries , Commerce And Management Financial Services: Emerging Issues , Commerce And Management Goods & Service Tax , Commerce And Management Human Resource Development , Commerce And Management Human Resource Development In India : Conceptual Analysis & Strategies , Commerce And Management Human Resource Management , Commerce And Management Human Resource Management , Commerce And Management Human Resource Management , Commerce And Management Human Resource Management , Commerce And Management Human Resource Mangement: Tips When Hiring & Firing Employees , Commerce And Management Human Resources Management , Commerce And Management Human Resources Management A Practical Approach Towards An Organisation , Commerce And Management Incom Tax Law , Commerce And Management Indian Capital Market And Sebi , Commerce And Management Indian Retail Sector : The Changing Scenario , Commerce And Management Industrial Law , Commerce And Management Inventory Management : Text & Cases , Commerce And Management Jan-Dhan Yojna And Financial Inclusion , Commerce And Management Leadershio Jigsaw: One Piece Short Of Jigsaw , Commerce And Management Leadership , Commerce And Management Logistics & Supply Chain Management , Commerce And Management Make In India , Commerce And Management Management Accounting , Commerce And Management Management Information System , Commerce And Management Management Of Public Enterprises , Commerce And Management Management Training & Skills , Commerce And Management Managing Entrepreneurship Development , Commerce And Management Managing Organisational Change : Issues & Challenges , Commerce And Management Marketing Management , Commerce And Management Marketing Management , Commerce And Management Marketing Research , Commerce And Management Marketing Research , Commerce And Management Marketing Research , Commerce And Management Marketing Strategy , Commerce And Management Modern Business Communication , Commerce And Management Modern Financing Hybrid Instruments , Commerce And Management Money And Banking In India , Commerce And Management Msmes : Contributions Of Women Entrepreneurs , Commerce And Management Online Marketing Issues And Challenges , Commerce And Management Organisational Behavour: Organize With Chaos , Commerce And Management Organisational Management , Commerce And Management Personality Development , Commerce And Management Personality Development , Commerce And Management Personality Development And Soft Skills , Commerce And Management Personality Growth & Training Development , Commerce And Management Principles Of Accounting , Commerce And Management Principles Of Management , Commerce And Management Principles Of Marketing Management , Commerce And Management Production & Operation Management , Commerce And Management Production Management , Commerce And Management Productivitiy Analysis Of Small Scale Industrial Sector In India , Commerce And Management Productivity & Profitability Of Scheduled Commercial Banks In India , Commerce And Management Research Methodology , Commerce And Management Research Methodology & Statistical Techniques , Commerce And Management Research Methodology : Tools & Techniques , Commerce And Management Research Methods In Business And Management , Commerce And Management Resource Management , Commerce And Management Risk Management , Commerce And Management Rural Entepreneuism , Commerce And Management Rural Management : Contemporary Issues & Challenges , Commerce And Management Sales & Advertising Management , Commerce And Management Sales Management , Commerce And Management Sales Management In 21St Ccentury , Commerce And Management Self Confidence Bulding , Commerce And Management Self Employment : Start Your Own Business , Commerce And Management Significance Of Information And Communication Technology , Commerce And Management Skill Development , Commerce And Management Small-Scale Industries In India , Commerce And Management Strategic Management , Commerce And Management Stress Management , Commerce And Management Team Work For Better Management , Commerce And Management Time Management , Commerce And Management Total Quality Management , Commerce And Management Training & Development , Commerce And Management Training And Management Development , Commerce And Management Volatility In Indian Stock Market , Commerce And Management Waste Management And Treatment , Commerce And Management Women Empowerment In India , Commerce And Management Women Entrepreneurship : Issues And Strategies , Commerce And Management Women Leadership : A Management Perspective , Commerce And Management Wto Trade & Development , Computer Science Advanced Computer Application In Library & Information Science , Computer Science Computer Hardware , Computer Science Computer Hardware: Basics , Computer Science Computer Progmming , Computer Science Computer Programming Language , Computer Science Computer Software Languages And Graphics Design , Computer Science Data Base Management System , Computer Science Data Communication Computer Network , Computer Science Data Mining & Warehousing , Computer Science Data Structure & Algorithim In C ++ , Computer Science Data Structure And Programing In C , Computer Science Data Structures Using ‘C’ , Computer Science Fundamentals Of Data Structures , Computer Science Information Communication Technology , Computer Science Information Technology For Future , Computer Science Internet & Java Programming , Computer Science Introduction To C++ And C , Computer Science Introduction To Java Script , Computer Science Network Management - In 2 Parts , Computer Science Neural Network & Fuzzy Logic , Computer Science Object Oriented Programming In C ++ , Computer Science Operating System , Computer Science Programming In Java , Computer Science Programming Language - In 2 Parts , Economics Agricultural Economics , Economics Agricultural Productivity And Cooperative Credit , Economics All About Budgeting : Budgeting In 90 Minutes , Economics Applied Mathematics In Economics , Economics Banking Insurance And Negotiable Instrument Law , Economics Banking Sector Reforms In India : Problems & Prospects , Economics Chanakya: Father Of Modern Economics , Economics Community Development , Economics Cooperative Credit In Agriculture Development , Economics Corporate Achievements : Corporate Blunders , Economics Credit And Productivity , Economics Credit Controller’S , Economics Cultural Economics , Economics Development Of Life Insurance Sector In India : Issues & Challenges , Economics Development Of Research Tools , Economics Development, Displacement And Deprivation , Economics Development, Sustainability, Equality & Women’S Issues , Economics Dimension Of Child Labour , Economics Disinvestment Of Public Sector Enterprises , Economics Disinvestment Of Public Sector Undertaking , Economics Economic Empowerment Of Dalit Women , Economics Economic Geography , Economics Economic Reforms , Economics Economic Reforms & Employment Generation , Economic Reforms & Foreign Trade In India , Economic Reforms & Poverty Alleviation In India , Economic Reforms & Public Sector Enterprises , Economic Reforms & Tribal Entrepreneurship , Economic Theory , Economic Thinker , Economic Thought , Economic Thoughts Of Dr. B.R. Ambedkar-In 2 Vols. , Economics & Management Of Public Transport , Economics : Principles & Problems-In 3 Vols. , Economics Dictionary , Economics For Engineers , Economics Of Environmental Regulation , Economy & Enterpreneurship , Economics Empowerment Of Rural Women , Economics Empowerment Of Women : Programme, Policies, Issues & Challenges , Economics Energy Resources, Alternative Search And Sustainable Development , Economics Entrepreneurship And Rural Development , Economics Fdi And Export Promotion : A Case Of Indian Manufacturing Industry , Economics Financial Management Of Public Sector Enterprises , Economics Financial Sectors Reforms , Economics Financial Services: Emerging Issues , Economics Foreign Direct Investment & Socio - Economic Transformation In India , Economics Fundamentals Of Industrial Economics , Economics Fundamentals Of Investment , Economics Gandhian View On Rural Empowerment , Economics Globalisation & Economic Growth In India , Economics Globalisation & Indian Economy , Economics Globalization Labour Market & Employment-In 2 Vols. , Economics Goods & Service Tax , Economics Great Industrialists Of India , Economics Health & Socio-Economic Status Of The Aged , Economics History Of Economic Thought , Economics Human Development And Economic Development , Economics Impact Of Tourism On Indian Economy , Economics Incom Tax Law , Economics Indian Capital Market And Sebi , Economics Indian Economy , Economics Indian Economy - In 2 Vols. , Economics Indian Values Subtle, Apt & Eternal , Economics Informal Sector & Credit To Indian Agriculture , Economics Institutional Rural Credit Management , Economics Integrated Area Development & Planning , Economics Integrated Rural Development , Economics International Economic Organisations , Economics International Economics , Economics Inventory Models And The Problems Of Price Fluctuations , Economics Jaina Economic Life : Ancient And Mediveal India , Economics Loss Of Innonence : Reality Of Child Labour , Economics Macroeconomics Theory , Economics Management Of Public Enterprises , Economics Managerial Economics , Economics Managerial Economics , Economics Managerial Economics: A Conceptual Overview , Economics Managing Creativity In Knowledge Economy , Economics Mgnrega With Schemes And Guidelines , Economics Microeconomics Theory , Economics Microfinance : Issues And Challenges , Economics Microfinance And Poverty , Economics Monetary Economics , Economics Money And Banking In India , Economics Msmes : Contributions Of Women Entrepreneurs , Economics Msmes : Opportunities& Challenges - In 2 Vols. , Economics New Economic Policies And Employment Opportunities In India , Economics Ngo In India , Economics Poverty In India : Concepts, Measurement And Alleviation , Economics Principles Of Political Economy , Economics Priority Sector Lending Of Commercial Banks , Economics Problems & Challenges Of Msmes , Economics Productivitiy Analysis Of Small Scale Industrial Sector In India , Economics Productivity & Profitability Of Scheduled Commercial Banks In India , Economics Public And Private Sector Of Mutual Funds ( Investment Pattern ) , Economics Public Sector Reforms In India , Economics Revisiting Economy Missing Links & Alternative Vision , Economics Role Of Nationalised Banks In Rural Development , Economics Role Of Ngos In Scio - Economic Development , Economics Role Of Regional Rural Banks In Rural Development , Economics Rural Child Empowerment , Economics Rural Empowerment Through Agro-Based Industries , Economics Rural Empowerment Through Cooperatives , Economics Rural Entepreneuism , Economics Rural Management : Contemporary Issues & Challenges , Economics Rural Poverty In India : A Synoptic View , Economics Rural Urban India : Imbalance In Growth , Economics Small-Scale Industries In India , Economics Socio-Economic Profile Of Child Labour , Economics Startup India An Important Step , Economics Status Of Child Labour In India , Economics Strategic Management Of Environment For Sustainable Development , Economics Strategic Resource Management And Sustainable Development - In 3 Vols. , Economics Strategies For Sustainable Management Of Disaster In India , Economics Teaching Methods Of Economics , Economics Urban Informal Sector And Employment Generation , Economics Volatility In Indian Stock Market , Economics Wto & Emerging Pattern Of India’S Foreign Trade , Economics Wto Trade & Development , Education 8 Moments Of Power In Coaching , Education Academic Orientation And Academic Staff College , Education Advance Research Methods In Education , Education Ancient Education System And Current Education Policy , Education Aristotle And Ancient Educational Ideals , Education Art Of Leadership In Teaching , Education Art Of Teaching , Education Assessment For Learning , Education Behaviour Therapy For Students , Education Biographical Dictionary Of Freethinkers Of All Ages And Nation , Education Career Counseling , Education Career Guide , Education Career Planning , Education Child Development , Education Child Development Human Development And Family Relations , Education Child Labour In India : An Overview , Education Children Some Educational Problems , Education Childrens Literature , Education Contemporary India And Education , Education Creating & Using Learning Targets & Performance Scale , Education Democracy & Education , Education Development Of Adult Education In India , Education Development Of Distance Education In India , Education Development Of Education System In India , Education Development Of Higher Education In India , Education Development Of Indian Education System , Education Development Of Non-Formal Education In India , Education Development Of Primary Education In India , Education Development Of Reading And Writing Skills In Youths , Education Development Of Research Tools , Education Development Of Secondary Education In India , Education Development Of Special Education In India , Education Development Of Women Education In India , Education E- Learning , Education Education Administration , Education Education And Futurology , Education Education And Information Technology Challenges , Education Education Thoughts & Thinkers , Education Educational Development Through Rural Libraries , Education Educational Philosophy , Education Educational Priorities & Dalit Society , Education Educational Psychology , Education Educational Technology , Education E-Education , Education Emienent Educationist Of India , Education Eminent Women : Administrators , Education Eminent Women : Artists , Education Eminent Women : Educationists , Education Eminent Women : Scientists , Education Eminent Women : Sports , Education Empowering Learners : Teacher Trainer Tutor , Education Encyclopaedia Of Education - In 10 Vols. , Education Encyclopaedia Of Educational Development In India In 8 Vol. , Education Encyclopaedia Of Sex Education ( Psychology Of Sex ) , Education English Language Teaching , Education Environmental Education , Environmental Education , Essays On Education , Education Examining Reasoning , Education Examining Similarities & Diffferences , Education Feeding Of School Children , Education Games For The Playground, Home, Schools And Gymnasium , Education Gender School & Socieety , Education Goals & Purpose Of Higher Education , Education Guidance And Counselling : New Directions-In 2 Vols. , Education Handbook Of Education , Education Higher Education In India : Issues & Concerns , Education History Of Education , Education How To Teach , Education How To Teach Religion Principles And Methods , Education Identifying Critical Content , Education Impact Of Few Factors On Academic Achievments Of Students , Education India What Can It Teach Us? , Education Indian Education System Under British Empire , Education Knowledge And Curriculum , Education Knowledge Generation, Discovery, Sharing And Networking In 21St Century , Education Knowledge Information & Communication , Education Learning & Teaching , Education Lifes Learning Experiences By An Educationist , Education Measurement & Evaluation In Education , Education Methods Of Teaching In The College In 2 Vol. , Education Methods Of Teaching Language & Language Education , Education Microteaching , Education Moral Education , Education Moral Instruction Of Children , Education Multimedia In Education , Education Music Education , Education Music Education , Education New Developments And Innovations In Modern Educational System , Education Online And On Mission , Education Outline Of Education Doctrine , Education Overcoming School Anxiety Of The Child , Education Personality Development And Soft Skills , Education Philosophical Perspective Of Education In Ancient India , Education Philosophy Of Education Teaching & Learning , Education Popular Education , Education Practical Education In 2 Vol. , Education Practicing Skills, Strategies & Processes , Education Problems Of Life And Their Soliutions , Education Processing New Information , Education Psychology Of Education , Education Reading Habit & Readers Interest , Education Reading How To Teach It , Education Recording & Representing Knowledge , Education Reform Of Education , Education Revising Knowledge , Education Rural Life And The Rural School , Education Science Of Education , Education Scientific Study Of Education , Education Scientific Thinking And Self Development , Education Sex-Education , Education Socio-Economic Profile Of Child Labour , Education Socio-Educational Planning & Development In India , Education Special Education For Special Children , Education Status Of Child Labour In India , Education Successful Living: Some Tips , Education Talks To Teachers , Education Teacher Education In India , Education Teacher’S Companion For Physically Challenged Students , Education Teaching In The Digital World , Education Teaching Methods Of Education , Education Teaching Methods Of English , Education Teaching Methods Of Environmental Science , Education Teaching Methods Of Geography , Education Teaching Methods Of History , Education Teaching Methods Of Mathematics , Education Teaching Methods Of Physical Education , Education Teaching Methods Of Psychology , Education Teaching Methods Of Science , Education Teaching Methods Of Social Science , Education Teaching Methods Of Sociology , Education Teaching Methods Of Zoology , Education Teaching Of Yoga , Education Technical & Vocational Education , Education Thoughts On Educational Topics And Institutions , Education Training & Development , Education Training And Management Development , Education Training Managers , Education Trends In Training Programme , Education Value Education , Education Ways Of Counseling: The Zen Way Of Counseling , Education Youth Its Education, Regimen And Hygiene , English Adventures In Criticism , English Age Of Dryden , English Age Of Elizabeth ( 1547 - 1603 ) , English Age Of Pope The , Age Of Tennyson , Alfred Tennyson , Alienation And Affirmation In The Plays Of Oneill, Miller And Williams , American Literature , American Poetry & Prose- In 3 Vols., ( 4 Parts ) , Anglo-Saxon Literature , Appreciations And Criticisms Of The Works Of Charles Dickens , Ariosto, Shakespeare And Corneille , Art Of Fiction , Aspects Of Literature , Bacon , Basic Introduction To Communicative English , Changing Face Of Women In Literature , Character Writings Of The Seventeenth Century , Characteristics Of Women , Characters Of Shakepeares Play , Childrens Literature , Chronicle History Of The Life And Work Of Shekespeare , Classic Myths In English Literature And In Art In 2 Vol. , Classical Mythology In English Literature , Communication Principles And Practice , Communicative English , Complete Plays Of George Bernard Shaw - In 4 Vols. , Contemporary World Literature , Critical Studies , Critical Study Of A.K. Ramanujans Poetry , Critical Study Of Indian English Writter , Critical Study Of Keats Hyperion , Critical Study Of Virginia Woolf , Critical Study Of William Shakespeare In 3 Vol. , Critical Thinkimg, Academic Writing & Presentation , Cult Of The Sublime The , Dicken’S Hard Times : A Crituque Of Victorian Age , Drama Theory And Practice , Dramatic Techniques In 2 Vol. , Edward Albee , Eighteen Century English Literature , Eighteenth Century Essays On Shakespeare , Elementary Phonetics & Spoken English , Elements Of English Language , Eminent Indian Authors & Poets , Eminent Indian Women Writers In English , Eminent Women : Writers , Encyclopaedia Of English Literature - In 2Vols. , Encyclopaedia Of The World’S Best Literature - In 8 Vols. , Encyclopaedia Of Universal Literature - In 2 Vols. , English Composition And Literature , English Critical Essays In 2 Vol. , English Grammar , English Language And Learning , English Language And Linguistics , English Language Teaching , English Language: History, Standards And Spellings , English Literacy Criticism , English Literary Criticism , English Literary Criticism And Indian Poetics ( Upto 18Th Century ) , English Literature , English Literature : Ninteenth Century , English Literature : The Interpreter Of English History , English Literature And Society In The Eighteen Cetury , English Literature Eighteen Century & The Romantic Age , English Literature Of The 19Th Century , English Novel In Time Of Shakespeare , English Phonology , English Poetry ( 1550-1660 ) , English Poetry From Chaucer Tomilton , English Prose , English Prose And Drama ( 1550-1660 ) , Epics & Romances Of The Middle Age , Essays In English Literature , Essays Of George Eliot , Essays On Modern Novlists , For You My Daughter , From Chaucer To Tennyson , From Resistance To Revolution , George Bernard Shaw , George Eliot : A Critical Study Of Her Life, Writings And Philosophy , Great Poets Of India , Great Writers Of India , Group Discussion , Growth Of English Drama , Handbook Of The English Language , History Of American Literature , History Of Elizabethan Literature , History Of English & American Literature , History Of English Literature , History Of English Literature In 2 Vol. , History Of English Prose & Fiction , History Of English Romanticism - In 2 Vols. , History Of French Literature , History Of Nineteenth Century Literature , History Of The Anglo-Saxons , Impact Of Scientific Thought Of Victorian Fiction , Indian Culture & Literature , Indian English Literature , Indian English Poetry & Prose , Indian Language And Literature , Indian Literature , Indian Writing In English , Influence Of Modern American Drama , Initiation Into Literature , Introduction To American Literature , Introduction To Feminism , Introduction To Shakespeare , Introduction To The Appreciation Of Literature , Introduction To The Study Of Literature , John Milton , John Webster’S Plays , Kants Theory Of Knowledge , Landmarks In French Literature , Language : An Introduction To The Study Of Speech , Languages And Linguistics For Schools , Lectures & Essays , Lectures On Dramatic Art & Literature - In 2 Vols. , Lectures On Language , Literary Criticism , Literary Criticism , Literary Criticism Of The 19Th & 20Th Centuries , Literary Essays , Literature Of Ecstassy , Lord Macaulay’S Critical Essays - In 2 Vols. , Making Of Literature , Medieval And Renaissance Poetry And Plays , Modern American Prose Selections , Modern English , Modern English Literature , Modern English Literature , Modern English Prose , Munshi Prem Chand Literature , Naturalism In The Novels Of Stephen Crane , New Ideas In India During The Nineteenth Century , Nineteenth Century British And American Literature , Nineteenth Century British And American Poetry ( Second Half ) , Nineteenth Century Poetry ( 1798-1899 ) , Outline History Of English Literature , Outline Of American Literature , Personality In Literature , Plays Acting And Music , Poems And Plays Of Robert Browning , Pre-Romantic Poetry , Principles Of Language Study , Rama & Moses , Readers Psychology , Reading Habit & Readers Interest , Real Shakespeare , Renaissance Poetry , Restoration And 18Th Century Literature ( 1660-1798 ) , Restoration And The Neo-Classical Period , Restoration To Romanticism: English Poetry, Drama And Fiction , Robert Browning , Robert Burns , Romantic Movement In Medieval Literature , Shakespeare & The Modern Stage With Other Essays , Shakespeare In The Theatre , Shakespearean Drama , Shakespearen Tragedy , Shakespearrean Tragedy , Short History Of English Language , Short History Of English Literature , Short Story Of French Literature In 2 Vol. , Social & Literacy Context: Restoration To The Romantic Age The , Social Letter Writing : How To Win Friends , Sri Auribindo Ghosh : Life & Philosophy , Studies In Literature & History , Studies In Mediavel Life & Literature , Study Of Shakespeare , Symbolist Movement In Literature , T.S. Eliot , Tales From Charles Dickens , Tales From The Hindu Dramatists , Teaching Methods Of English , Technique Of Fiction Writing , Tennyson : Complete Works , Themes And Characters In Shakespeare’S Plays , Theory Of The Theatre , Treatise From Deathbed , Twentieth Century Drama , Twentieth Century Indian Feminism & Post Modern Indian Women Novelist , Twentieth Century Poetry , Twentieth Century Prose , V.S. Naipaul , Victorian Age In Literature , Victorian Poetry , Vision Of Evil : The Novels Of William Golding , William Shakespeare And His Works , Woman In The Nineteenth Century , Womans Work In English Fiction , Women And Literature , Womens Writing In English , Words, Phrases & Vocabulary , Works Of Robert Browning , Geography & Geology Adapting To Climate Change , Geography & Geology Atmosphere : An Introduction , Geography & Geology Atmosphere Of The Earth , Geography & Geology Climate Change , Climatology : An Introduction , Climbing On The Himalya And Other Mountain Ranges , Cultural Geography , Earth & Its Environment , Earth Science: Components, Branches & Elements , Earths Beginning , Economic Geography , Encyclopaedia Of Climatology - In 2 Vols. , Encyclopaedia Of Indian Geography - In 3 Vols. , Energy Resources & Sustainable Development , Energy Resources, Alternative Search And Sustainable Development , Energy, Environment And Climate , Environment & Disaster Management , Environment & Global Warming , Environmental Geography , Geographic Information Systems , Geographical History Of The World , Geological Evidence Of The Antiquity Of Man In 2 Vol. , Geological History Of Plants , Gis Applications In Tourism , Global Environmental Issues , Global Environmental Issues & Concerns , Global Warming Responses & Geoengineering , Highest Mountain Peaks In India , Himalayan Journals In 2 Vol. , History Of Sea Power , History Of The Earth, Solar System And Human Evolution , Human Geography , Indian Railways , Industrial Geography Of India , Introduction To Earthquakes And Seismology , Introduction To World Geography , Land Of Seven Rivers , Land Relations & Agrarian Change , Land Use Parks, Refuges And Wildernesses , Lichens Of Nanital, Western Himalaya , Mountain Ranges Of India , Mountains Of India , Natural Hazardous , Natural Resources, Water Harvesting And Drought In Central India , Objective Geography , Oceanography : The Sea & Its Wonders , Our Earth , Our Earth , Pearls Of India , Physical Geography , Physical Geography In 2 Vol. , Physical Geography Of India , Political Geography , Pollution Of Ganga River , Population Geography , Population Growth : The Problem Of Unemployment , Professor Parmeshwar Dayal : The Millennium Geographer Of Bihar ( A Felicitation Volume ) , Qualitative Geography , Quantitative Geography , Regional Geography Of Vedic Indian , Rivers Of India , Rural Geography , Rural Urban India : Imbalance In Growth , Save Water Save Life , Science Of Atmosphere , Splendid Wilds : Safari Through Corbett , Strategic Management Of Environment For Sustainable Development , Strategies For Sustainable Management Of Disaster In India , Sustainable Transport Management , Teaching Methods Of Geography , Textbook Of Geography , Textbook Of Physical Geography , Tools & Techniques Of Geomorphic Study , Transport Geography , Urban Geography , Volcanoes : An Earth Science Perspective , Water For Life , World Geography: A Complete Study , Hindi Kalidas , Hindi Mahatama Kabir : Jeevan Aur Darshan , Hindi Mahan Sanskrit Sahityakar , Mahan Sant Kavi , Hindi Kavita : Bhakti, Shringar Evam Adhunik Kaal , Hindi Patrakarita Evam Ashok Ji , Hindi Upanyaso Mein Kalankit Charitro Ki Samajikta , Hindi Jagat Ke Mahan Kahanikar Evam Unki Shresth Kahaniya , Hindi Gadh Shaili Ka Vikas , Siyaram Sharan Gupt Ke Sahitya Mein Sanskritik Chetna , Silliyan Pighalti Rahin , Nirala Sahitya Mein Manviya Chetna , Filhaal , Bhasha Utpatti, Sanrachna Evam Prakarya , Bhasha Aur Lipi , Bharat Mein Lok Natya Evam Lok Nritya Parampara , Bharat Ratna , Prayojanmulak Hindi , Prakash Ke Liye , Prachin Evam Madhyakaleen Kavya , Premchand Ki Vaicharik Tahta Rachnatmak Prishthbhumi , Ramcharitmanas Mein Nihit Manav - Mulya , Shesh Hi Vishesh : Kahaniyan Chintan Ko Jhinjhodti Hui , Sanskrit Natya Sahitya , Samkaleen Hindi Kavita , Swami Vivekanand , Sur : Bhakti, Sadhana, Aur Virah , Sur Ki Kavya Chetna - Do Bhago Mein , Ujjawalnilmani : Bhakti Kavya , Tulsidass , Natakkar Bhartendu , Aadhunik Bharat Ke Nirmata Mahamana Pt. Madan Mohan Malviya , Aadikaleen Kavya Parampara , Anchuye Kavi Dhumil Aur Mein , Lok Sahitya , Lekhan Kala Samvardan : Saiddhantik Evam Vyavharik Paksh , Sant Ravidass : Jeevan Aur Darshan , Mere Ghar Aana Zindgi , History Age Of Elizabeth ( 1547 - 1603 ) , History Aghories Of India , History Ancient & Mediaeval Philosophy , History Ancient And Modern Celebrated Freethinkers , Ancient Architecture Of Indian Temples , Ancient Greek Religion And Mythology , Ancient Indian Architecture , Ancient Indian Art & Culture , Ancient Indian Art & Painting , Ancient Indian Civilization : Art & Culture , Ancient Indian History , Ancient Indian Sculpture & Painting , Annexation Of The Punjab And Maharajah Duleep Singh , Archaeology In Ancient India & World , Archaeology Of Ancient Civilization , Archieve Of Indian Fine Art , Architecture Of Delhi , Architecture Of India , Art & Craft In India , Art & Craft Of Harappans , Art & Craft Of Indus Valley Civilization , Art & History Of Pottery , Art And History Of Painting , Aryan Rule In India - In 2 Vol. , Ashoka And Buddhism , Ashoka In History And Historical Memory , Beautiful Mogul Princesses , Bodh Darshan : An Insight Into Buddhism , Brief History Of Free Thought Ancient & Modern In 4 Vol. , British Rule In India - In 2 Vols. , Buddhism : History & Practice , Buddhist & Hindu Arcitecture In India , Buddhist Monks & Monasteries , Buddhist, Hindu & Jain Art , Cave Temples Of India , Central Asia : An Anatomy Of The History , Champaran Satyagraha , Chanakya: Father Of Modern Economics , Civilisation Its Cause And Cure , Civilization In Ancient India , Coins In Ancient India , Coins In Medieval India , Coins In Modern India , Coins Of India , Comprehensive History Of India , Conservation Of Indian Culture , Contemporary Art And Architecture , Critical Study Of Ancient Civilization , Cultural Heritage Of India , Cultural History Of India , Cultural Journey Of India A , Culture & Ethonology , Culture Of North East India , Dalits In Ancient & Medieval India , Dalits In Colonial Era , Dalits In Post Independence Era , Decline & Fall Of The Roman Empire , Deen Dayal Upadhyay , Delhi Sultanate , Delhi Sultanate : Administration , Society & Culture , Dr. B.R. Ambedkar : A Rebel Dalit Leader - In 2 Vols. , Early Historical Settelments In India , Encyclopaedia Of Women - In 7 Vols. , Epic & Early Puranic Period , Fall Of The Moghal Empire Of Hindustan , Famous Art Museums Of The World , Famous Emperors Of Indian History , Famous Fables Of Indinan Army , Famous Fights Of Indian Native Regiments , Female Warriors , Foreign Trade Under Mughals , Freedom Fighters , Freedom Movements In India , From Resistance To Revolution , Gates Of India , Geographical History Of The World , Glimpse Of Indian Heritage , Glimpses Of Indus Valley Civilization , Great Army Award Winners , Great Artists Of India , Great Ashoka , Great Freedom Fighters Of India , Great Freedom Fighters Of India , Great Mughal Empire , Great Mughal Empire , Greatest Historical Emperors Of India , Greatest Scientists Of The World , Harappan Civilization , Harappan Civilization , Harappan Civilization And Vedic Culture , Heritage Of India : Monuments & Archaeological Sites , Heritagistaion : A Challenge For Tourism Promotion , Hindu : Festivals , Fairs & Fasts , Hindu : Manners , Customs & Ceromines , Hindu : Manners , Customs & Ceromines , Historical Development Of Art , Historical Study Of Ancient Indian Theatre , History & Historiography , History Of Ancient Civilization , History Of British India , History Of Buddhism : Art , Architecture And Literature , History Of Early Civilization-In 2 Vols. , History Of England In 2 Vol. , History Of Europe : Early Times To 1789 A.D. - In 3 Vols. , History Of Human Society , History Of India , History Of Modern Europe ( 1792 - 1878 ) -In 3 Vols. , History Of Religion , History Of Sculpture, Painting & Architecture , History Of Shivaji In 2 Vol. , History Of The European Fauna , History Of The United States-In 2 Vols. , How To Observe In Archaeology , Incedible Forts Of India , Incredible India : Life & Landscapes , India And The Indians In The British Period , India For Indians , India Trough The Ages ( A Popular & Pictureque History Of Hindostan ) , India Under Britisher , Indian Arecgaeological Heritage A Memoris Of The Anciant India , Indian Army After Independence , Indian Art & Culture , Indian Education System Under British Empire , Indian Freedom Movement , Indian History - In 3 Vols. , Indian History : Ancient , Medieval & Modern , Indian History Ancient Period To British Period , Indian Myth And Legend , Indian Temple : Coloruful Reliefs , Indian Tribes & Culture , Indian Under British Rule :From The Foundation Of The East India Company , Indus Valley Civilization , Interogating The Santhal Hul , Interpretation & A History Of The Nationalist Movement , Introduction To The History Of Japan , Introduction To The Study Of History , Islamic Art And Mughal Architecture , Jaina Worship And Rituals : Ancient & Medieval India , Life & Culture In Ancient India , Life & Culture In Medieval India , Life And Travel In India , Literary And Cultural Perspectives On Ancient India , Magadha Empire , Makers Of Indian History - In 2 Vols. , Makers Of Indian History P / B , Manners And Monuments Of Prehistori People , Maratha Empire , Material Culture In Ancient India , Maurya Empire , Medieval Art & Culture , Medieval Art & Culture - In 2 Vols. , Medieval History Of India - In 3 Vols. , Medieval Indian Architecture , Medieval Indian History , Modern Architecture , Modern Indian History , Mughal Architecture And Structures , Mughal Empire , Natural Wonders Of Theworld , Outline Of History The In 4 Vol. , Progress And History , Queen Victoria , Rebellion Against Empires , Revoluntionary Movements For Indian Freedom , Rise & Expansion Of The British Dominion In India , Rise And Fall Of Mughal Empire , Role Of Hazaribagh District In Freedom Movement , Roman Art And Architecture , Sacred Rivers Of India , Short History Of The World In 2 Vol. , Shudras In Ancient India , Slavery In History , Social Formation In Ancient India , Social History , Society & Caste In Ancient India , Socio-Historical Backgroud Of Indian Society & Culture , Story Of Freedom Struggle , Study Of Indias Archaeological Heritage , Survey Of Hindu Architecture , Sustainable And Modern Architecture , Taj Mahal : History And Architecture , Teaching Methods Of History , Temple Architecture Chalukya Of Kalyani , Tradition Of Pahari Miniature Paintings , Vedic Civilization , Vedic Civilization , Vision Of India , Wandeings In India & Other Sketches Of Life In Hindostan , Woman In Sacred History , Women Of History , World Architecture: A Historical Study , World Mythology , World War Ii Resistance Movement , Library Information Science A.A.C.R. Ii ( Anglo - American Cataloguing Rules - Ii ) , Library Information Science Academic Library Website : Creation & Evaluation , Library Information Science Anglo-American Cataloguing Rules ( Aacr ) , Library Information Science Cataloguing Digital Data Information In Cyber Age , Collection Development In Academic Libraries , Communicationtechnology In Academic Library , Current Trends And Techniques In Library & Information Science , Current Trends And Techniques In Library & Information Science , Designing & Evaluation Of Research In Library Science , Digital Communication Technology For Libraries , Digital Library & Information Technology - Changing Concepts , Digital Library And Preservation , Digital Library Environment And Networking , Digital Technologies And Transformation In Academic Libraries In 2Vol. , Electronic Library Resources: Use And Users , E-Library , Encyclopedic Dictionary Of Library & Information Science - In 3 Vols. , Encylopeadic Dictionary Of Library Information Science & Network , Financial Management Of College Libraries , Foundation Of Library And Information Science , How To Avoid Plagrism , Information Literacy In Digital Age , Information Resource Management In Digital Era , Information Resources Inlibrary , Information Resources In Modern Libraries , Information Technology And Library Services , Information Technology Applications In Libraries , Information Technology Applications In Libraries , Innovative Librarainship Through Ict Tools And Technology , Issues In Digital Cataloguing , Knowledge Management : Library & Information Services In Changing It Scenario , Librarians Manual To The Internet : Searching & Evaluation Information , Librarianship And Digital Technology In Libraries , Libraries And Institutional Repositories , Libraries In Digital Era Technologies & Application , Library Administration: Theory And Practice , Library Automation & Networking , Library Classification , Library Information Service Using Cloud Computing , Library Management : Leadership Style, Strategies & Organisational Climate , Library Management In Internet Era , Library Resources And Technical Services , Library Technologgy Management , Manual Of Library Automation & Networking , Modern Library System , Multimedia In Information Services , Open Access Movement & Initiatives In Library , Practical Approach To Classified Catalogue Code , Preservation Of Library Collection In Library Scienc , Preservation Strategies In Digital Library , Reference And Information Services , Reference Services , Research Methodology , Research Methodology : Tools & Techniques , Research Methodology & Techniques In Lib. Sc. , Search Engines : Utility And Efficiency , Sustainable Library Building , Theory & Application Of Library Management , Theory & Practice In Library & Information Science , Mathematics & Statistics Algebra , Mathematics & Statistics Algorithms And Digital Signal Processing , Mathematics & Statistics Axiomatic Foundation Of Set Theory , Mathematics & Statistics Brief History Of Mathematics , Calculus , Complex Analysis , Differential Equations , Discrete Mathematics , Discrete Mathematics , Elementary Mathematics For Engineers , Engineering Mathematics , Engineering Mathematics Vol. I , Engineering Mathematics Vol. Ii , Fundamentals Of Analysis Geometry , Fundamentals Of Biostatistics , Fundamentals Of Calculus , Fundamentals Of Complex Analysis , Fundamentals Of Coordinate Geometry , Fundamentals Of Differential Geometry , Fundamentals Of Discrete Mathematics , Fundamentals Of Dynamics , Fundamentals Of Graph Theory , Fundamentals Of Linear Algebra , Fundamentals Of Matrices , Fundamentals Of Number Theory , Fundamentals Of Practical Differential Equations , Fundamentals Of Probability , Fundamentals Of Real Analysis , Fundamentals Of Relativity , Fundamentals Of Set Theory , Fundamentals Of Spherical Trigonometry , Fundamentals Of Statics , Fundamentals Of Statistics , Fundamentals Of Topology , Fundamentals Of Two Dimensional Geometry , Fundamentals Of Vector Analysis , Fuzzy Mathematics , Geometry , Graph Theory , Group Theory , Higher Algebra , Integral Calculus , Linear Programming , Mathematical Demography , Mathematical Physics - Vol. 1 , Mathematical Physics - Vol. 2 , Mathematical Physics - Vol. 3 , Mathematics & Computational Methods ( Recent Trends ) , Multivariate Analysis Linear Algebra & Special Functions , Number Theory , Numerical Methods , Operation Research , Optimization & Calculus Of Variations , Ordinary And Partial Differential Equations , Partial Differential Equation In Vol.1 , Partial Differential Equation In Vol.2 , Philosophy Of Mathematics , Probability & Stastics , Real Analysis , Research Methodology , Research Methodology & Statistical Techniques , Research Methodology : Tools & Techniques , Set Theory, Lattce Theory, Boolean Algebra , Teaching Methods Of Mathematics , Textbook Of Graph Theory , Textbook Of Matrix , Topology , Vector Analysis , Vector Calculus , Philosophy : Religion : Sanskrit Ancient & Mediaeval Philosophy , Philosophy : Religion : Sanskrit Ancient And Modern Celebrated Freethinkers , Philosophy : Religion : Sanskrit Ancient Greek Religion And Mythology , Philosophy : Religion : Sanskrit Approach To Philosophy , Ashoka And Buddhism , Ashtanga Yoga : Practice & Philosophy , Bhakti Yoga : The Nature Of Devotion , Bhakti Yoga Pilgrimage , Bible: A Complete Study , Bodh Darshan : An Insight Into Buddhism , Body Mind & Spirit: Know That You Are Loved , Buddha Culture And Art In Medieval India , Comparative Religion , Comparative Study Of Sanskrit Literature , Comparison Of Religions , Comprehensive Study Of Suffism , Critical History Of Greek Philosophy , Cultural Description Of Mahabharata , Cultural Heritage Of India , Cultural Interface Of Indian Religion, Art & Arechitecture , Cultural Journey Of India A , Cultural Zones Of India , Culture & Ethonology , Culture & Thought , Culture Of North East India , Educational Philosophy , Elements Of Hindu Devotion , Ellora Temples , Encyclopaedia Of Great Festivals , Encyclopaedia Of Indian Heritage & Culture - In 11 Vols. , Encyclopaedia Of Mythology & Religion - In 5 Vols. , Environmental Ethics , Essence Of Buddhism , Essence Of Buddhism And Jainism , Essence Of Christinity , Essence Of Hindiusm , Essence Of Hinduism & Sikhism , Essence Of Islam , Essence Of Jainism , Essence Of Sikhism , Family Value System In Hindu , Four Varnas Of Hindu Society , Fundamental Philosophy In 4 Vol. , General View Of Positivism , Great Saints Of India , Green Philosophy , Higher Power Of Mind & Spitit , Hindoo Tales , Hindu : Festivals , Fairs & Fasts , Hindu Ceremony , Hindu Community , Hindu Ethiks And Morality , Hindu Gods And Heros , Hindu Literature In 2 Vol. , Hindu Tribes & Castes , Hinduism & Buddhism : An Historical Sketch- In 3 Vols. , Hinduism : A Global Perspective , Hinduism : A Global Perspective , Hinduism And Environment , Hindus As They Are , History Of Buddhism : Art , Architecture And Literature , History Of Philosophy , History Of Religion , History Of Religion , History Of Religion , How To Observe Morals And Manners , How To Teach Religion Principles And Methods , Human Problems And Art Of Living , Ideology Of Bhagwadgita , Ideology Of Tribal Culture , Importance Of Prayers In Religions , India Its Life And Thought , Indian & Western Philosophy , Indian Culture : The Salient Aspects Of Art Forms, Literature & Architecture , Indian Myth And Legend , Indian Philosophy : Past & Present , Indian Sufism : Change & Continuity , Indian Temple : Coloruful Reliefs , Indian Values Subtle, Apt & Eternal , Indus Valley Civilization , Introduction To Mythology , Introduction To Philosophy , Islamic Art And Mughal Architecture , Jaina Darshan : An Insight Into Jainism , Jaina Economic Life : Ancient And Mediveal India , Jaina Philosophy - In 2 Vols. , Jaina Social Life : Ancient & Medieval India , Jaina Sutra : Acharanga & Kalpa Sutra , Jaina Worship And Rituals : Ancient & Medieval India , Jainism And Western Thinkers , Kalidasa , Karma, Dharma And Moksha , Kshatriyas In Buddha’S Age , Life And Work In Benares And Kumaon , Life Goal, Spirituality And Health , Life Of Buddha The , Lord Jagannath In Sanskrit Literature , Lord Mahavira : Life And Philosophy , Mental Philosophy In 2 Vol. , Methods Of Divination , Moral Philosophies Of Advaita-Vedanta , Myth And Legands Of Our Own Land , Myth Land , Myth, Ritual And Religion In 2 Vol. , Mythology , Naturalism And Religion , Philosophical Studies , Philosophy Culture And Civilazation , Philosophy Oflanguage , Philosophy Of Education Teaching & Learning , Philosophy Of History In 2 Vol. , Philosophy Of Indian Culture Vol.I , Philosophy Of Indian Culture Vol.Ii , Philosophy Of Indian Culture Vol.Iii , Philosophy Of Life , Philosophy Of Mathematics , Philosophy Of Religion , Philosophy Of Spiritual Activity , Philosophy Of Tribal Culture , Popular Religion And Folk-Lore Of Northern India In 2 Vol. , Preaching Of India , Presuppositions Of India’S Philosophy , Principles Of Ethics In 2 Vol. , Problems Of Philosophy , Pt. Madan Mohan Malviya And Hindu Mahasabha , Religion , Religion And Science , Religions In Asia , Religions In Indian Culture , Religious Studies , Religious Teachings On Social Issues , Sant Kabir - Life And Philosophy , Scientific Facts In The Rigveda , Sculptureof India , Sculptures From India : Iconography And Style , Shudras In Ancient India , Solar & Lunar Eclipse In Indian Mythology , Spiritual Paradigm : Widsom Seekers , Spirituality & Health , Spirituality And Spiritualism , Spirituality Of Yoga , Sri Auribindo Ghosh : Life & Philosophy , Study Of The Bhagavata Purana In 2 Vol. , Tales From The Hindu Dramatists , Textbook Of Hindu Psyche , Textbook Of Mythology , The God: Idea Of The Ancients , Theism And Humanism , Tribal Roots Of Hinduism , Truest Self: You Are Light , Truth About Woman , Vedic Philosophy , Vedic Society , Wonders Of The Underwater World , World Heritage Sites , World Religion , Yoga Philosophy , Physics Acoustic Waves , Physics Advanced Power Electronics , Physics Alternative Energy , Physics Applied Electronics , Applied Physics -Vol. 1 , Applied Ultrasonics , Astronomy Basics , Atomic & Nuclear Physics & Molecular Spectroscopy , Atomic And Molecular Physics , Basic Electronics Engineering , Basic Thermodynamics , Basics Of Physics , Bioinstrumentation , Biosensors: Micro And Nanoscale Application , Brief History Of Astronomy , Classical Electrodynamics , Classical Mechanics , Comprehensive Study Of The Solar System Andf Galaxies , Computational Physics , Concepts Of Optical Amplifires , Continum Mechanics , Digital Communication , Digital Electronics , Electricity And Magnetism , Electromagnetic Theory , Electronic Devices & Circuits , Elements Of Modern Physics , Energy Development & Energy Impacts On Environment , Energy Resources & Conservation , Engineering Materials , Experimental Quantum Mechanics , Fundamentals Of Classical Mechanics , Fundamentals Of Optical Physics , Fundamentals Of Particle Physics , Fundamentals Of Quantum Mechnanics , Fundamentals Of Thermodynamics , Green Naotechnolgy , Group Theory , History Of The Earth, Solar System And Human Evolution , Introductory Electronic Devices & Circuits , Material Science: Nanotechnology And Application , Materials Science , Mathematical Physics - Vol. 1 , Mathematical Physics - Vol. 2 , Mathematical Physics - Vol. 3 , Nano-Electronics , Nano-Optics , Nano-Physics , Nano-Science : An Introduction , Nano-Technology & Society , Nano-Technology : An Introduction , Our Solar System , Our Universe , Physics Of Semiconductor Devices , Quantum Mechanics , Quantum Optics , Quantum Physics , Science & Technology In India , Science In Daily Life , Solid State Electronic Devices , Spectroscopy , Staistical Mechanics , Statistical Physics , Teaching Methods Of Physics , Thermodynamics , Ultrasonics : Theory And Applications , Waves Electromagnetism & Modern Physics , Political Science Babu Jagjivan Ram : A Crusader For Social Equality , Political Science Babu Jagjivan Ram : A Nation Builder - In 2 Vols. , Political Science Benazir Bhutto : The Democracy’S Martyr , Political Science Bharat Ratna Award Winners , British Impact On The Punjab States , Cellular Jail Of Andaman And Nicobar Island , Champaran Satyagraha , Chanakya: Father Of Modern Economics , Clean India Healthy India , Comparative Political Science , Comparitive Research In India After Independence , Constitution Protection Of Sc & St , Contemporary Political Thoughts , Contemporary Theory In International Relation , Crime & Corruption , Crime : Its Causes & Treatment , Criminal Justice System , Cyber Crime And Law , Deen Dayal Upadhyay , Delhi Sultanate , Delhi Sultanate : Administration , Society & Culture , Democracy & Education , Democracy And Social Change , Democracy And Social Ethics , Democratic Decentralisation In India , Digital India And Shri Narendra Modi , Dimension Of Child Labour , Dr. B.R. Ambedkar : A Rebel Dalit Leader - In 2 Vols. , Dr. Shyama Prasad Mukherjee Humanity Researcher , E - Governance : Inititatives & Challenges , Eminent Women : Administrators , Eminent Women : Politicans , Empowerment Of Rural Women , Empowerment Of Women : Programme, Policies, Issues & Challenges , Evolution In Modern Thought , Freedom Fighters , Freedom Movements In India , Fundamental Rights , Gandhian Ideology , Gandhian View On Rural Empowerment , Governance Ethics & Social Responsibility , Government Schemes For Indian Development , Government Steps Towards Health Development , Great Ashoka , Great Freedom Fighters Of India , Great Freedom Fighters Of India , Great Politicans Of India , Great Women Of India , Growing Up Untouchable In India , Human Nature In Politics , Human Rights & Police , Human Rights & Terrorism , Human Rights & Tribal Society , Human Rights & Women , Human Rights : An Introduction , Human Rights In India , Incredible India : Life & Landscapes , India & Tibet , India And The Indians In The British Period , India For Indians , India Under Britisher , Indian Fights And Fighters , Indian Freedom Movement , Indian Political System And Law , Indian Political Thinkers , Indian Under British Rule :From The Foundation Of The East India Company , Indias Street Culture : Constitute A Glorious , International Political Organisations , International Relations , Interogating The Santhal Hul , Judicial Process , Leadershio Jigsaw: One Piece Short Of Jigsaw , Leadership , Make In India , Make In India Mission , Making Of Clean India , Manifestos Of National Parties , Modern Political Theory , Modern Womens Rights Movement The , Morarji Desai , Municipal Governance: Structures, Finance And Problems Area , Myth & Reality Of The Sikh Militancy In Punjab , Nehru To Modi The Prime Minister Of India , New Ideas In India During The Nineteenth Century , Ngo In India , Panchayti Raj : Changing Power Structure & Process , Panorma Of Jaipur City Palace , Political Future Of India , Political Geography , Political Theory , Political Theory : Ideas & Institutions , Political Women In 2 Vol. , Politics In Ancient India , Politics Of Global Climate Change , Politics Of Global Warming , Population Growth : The Problem Of Unemployment , President Pranab Mukherjee ( A Journey From Mirati To Raisina Hills ) , Pressure Groups In Indian Politics , Principles Of Freedom , Principles Of Political Economy , Problems Of Untouchability, Social Justice & The Downtrodden , Professional Ethics And Human Rights In India , Pt. Dwarka Prasad Mishra , Public Administration Policy, Politics & Practice , Public Administration Today , Public Broadcasting Popular Culture , Public Sector Reforms In India , Rajiv Gandhi Khel Ratna Awards , Ram Mandir , Research Methods In Criminology , Reservation, Emancipation & Empowerment , Revoluntionary Movements For Indian Freedom , Rise & Expansion Of The British Dominion In India , Rise And Fall Of Mughal Empire , Role Of Governor And Article 356 , Role Of Hazaribagh District In Freedom Movement , Role Of Media In Women Empowerement , Role Of Nationalised Banks In Rural Development , Role Of Ngos In Scio - Economic Development , Role Of Women In District Politics , Rural Empowerment Through Cooperatives , Rural Urban India : Imbalance In Growth , Sc & St : Social Realities , Sc & St : Structure & Process , Shudras In Ancient India , Social & Political Ideas , Social Reform Movement & Jyotiba Phule , Social System & The Dalit Identify , Social Transformation & Globalization , Society And The Law , Startup India An Important Step , Story Of Freedom Struggle , Teaching Methods Of Political Science , Views Of Manu And Yajnavalkya On Crime & Punishment , Warfare Strategy , Western Political Thinkers , Women Of India , Statistics Biostatistics - In 2 Vols. , Statistics Fundamentals Of Biostatistics , Statistics Fundamentals Of Calculus , Statistics Fundamentals Of Matrices , Statistics Fundamentals Of Probability , Statistics Fundamentals Of Statistics , Statistics Linear Programming , Statistics Mathematical Demography , Statistics Multivariate Analysis Linear Algebra & Special Functions , Statistics Operation Research , Statistics Probability & Stastics , Statistics Research Methodology , Statistics Research Methodology & Statistical Techniques , Statistics Teaching Methods Of Mathematics , Tourism & Travel Management Ayurvedic Tourism , Tourism & Travel Management Community Tourism , Tourism & Travel Management Dark Tourism , Tourism & Travel Management Gender Participation In The Tourism Sector , Gis Applications In Tourism , Global Tourism : Exploration Of Key Issues , Heritagistaion : A Challenge For Tourism Promotion , Hospitality & Tourism Management , Hospitality Management & Operations , Hospitality, Leisure And Tourism Industries , Impact Of Tourism On Indian Economy , Indian Temple : Coloruful Reliefs , Life And Travel In India , Modern Tourism In Global Perspective , Rural Tourism : Emerging Issues And Challenges , Tourism & Hospitality : Prospects & Challenges , Tourism And Environment , Tourism And Hospitality In 21St Century , Tourism And Hospitality Management , Tourism And Sustainable Development , Tourism Environment And Ecology , Tourism In North East India , Tourism Planning & Tour Operation , Tourism Strategies For Rural Development , Tourism Sustainability And Growth , Zoology Advanced Biology - Vol. I , Zoology Advanced Biology - Vol. Ii , Zoology Analytical Techniques In Dna Sequencing , Zoology Anatomy Of The Human Brain ( H / B ) , Anatomy, Physiology & Health Education , Animal Behaviour , Animal Biotechnology , Animal Genetics , Animal Kingdom , Animal Welfare & Edge Species , Anthropology , Applications In Microbiology , Aquaculture Biotechnology , Aquarium And Water Cabinet , Ascaris ( The Intestinal Roundworm ) , Biochemical Techniques ( A Laboratory Manual ) , Biochemistry Of Biomolecules , Biochemistry Of Nucleic Acids , Biodiversity And Ecology , Biodiversity And Its Importance , Bioinformatics , Bioinformatics - In 2 Vols. , Bioinformatics : Concepts, Elements & Dimensions , Bioinformatics : Theory & Practice , Biological Diversity : Current Trends , Biology Of Micro-Organisms In 3 Vol. , Biomolecular Sequencing & Analysis , Biotechnology , Biotechnology : Principles & Practices , Biotechnology : Tools And Techniques , Biotechnology In 21St Century , Carnivoruus Animals , Classification Of Aquatic Plants , Classification Of Insects , Clinical Microbiology , Clinical Microbiology , Commercial Bioinformatics , Comparative Invertebrate Physiology - In 2 Vols. , Complete Study Of Mammals , Concepts Of Indian Fisheries , Conservation Biology , Cultural Anthropology , Dairy Microbiology , Dairy Science & Technology , Edge Species , Environment & Ecology Biodiversity, Climate Change & Disaster Management , Environmental Biotechnology , Environmental Biotechnology , Environmental Microbiology , Environmental Microbiology And Biotechnology , Enzyme Biotechnology , Essential Of The Gene Manipulation And Genomics , Evolution , Evolution In 3 Vol. , Evolution Of Biotechnology , Extinct Animals: World Study , Extinct Birds And Animals Of The World , Fishes & Sharks : Word Study , Fishing Industry The , Functional Morphology Of Wallago Attu , Fundamentals Of Biostatistics , Fundamentals Of Food Microbiology , Fundamentals Of The Gene Manipulation And Genomics , Genes In 2 Vol. , Genetics , Genetics Engineering , Genomics & Proteomics , Global Warming Controversies , Herbivorous Animals , Higher Invertebrate , Human Genetics , Human Implications Of Biotechnology , Immunology : Basic Concepts , Insect Immunolog And Pest Management , Insects : Our Fields , Forests Gardens & Houses , International Book On Birds , Introduction To Bacteriology , Introduction To Biodiversity , Introduction To Bioinformatics , Introduction To Bioinformatics , Introduction To Biotechnology , Introduction To Fishes , Introduction To Zoology , Jelly-Fish, Star-Fish And Sea-Urchins , Lower Invertebrate ( Non - Chordates ) , Mammals & Amphibians: World Study , Mcqs In Life Science ( Pb ) , Microarrary Analysis , Microbial Biotechnology , Microbiological Techniques , Microbiology - In 2 Parts , Milk Microbiology , Molecular Biology , Omnivorous Animals , Pet Sitting And Dog Training , Plant And Animal Kingdom , Poultry : A Practical Guide , Poultry And Their Diseases , Practical Handbook In Life Science & Environmental Science , Principles Of Enzyme Biotechnology , Principles Of Evolution , Principles Of The Gene Manipulation And Genomics , Recombinant Dna And Biotechnology , Reptiles & Birds , Study Of Fishes In 4 Vol. , Teaching Methods Of Zoology , Textbook Of Genetics And Evolution , Textbook Of Invertebrates , Textbook Of Medical Parasitology , Vegetable And Animal Oils , Vertebrate Embryology , Veterinary Medicine , Whaling And Conservation Issues , Wildlife Species At Risk , Wonders Of The Underwater World
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Assam View Result →
45.
Defence #8762559 AOC
Tender For Maintenance And Repair To External Water Supply And External Electric Supply, External Street Lights And Connected Work At Ebs Babugarh Under Ge (North) Meerut Cantt.; 1 M&L for laying andtesting 20 mm bore GI tubing medium grade with all required fittings and fixtures laid in trenches, on the ground or on supports or fixed to walls incl taking up or down old unsv pipe making good of disturbed surfaces of roads, path ways etc. complete all as specified and directed. 2 All as per Srl item No 1 but 25mm bore complete all as specified and directed. 3 All as per Srl item No 1 but 40mm bore complete all as specified and directed. 4 All as per Srl item No 1but 50mm bore complete all as specified and directed. 5 M&L for laying andtesting 150 mm bore DI pipes with spigot and socket ends centrifugally cast class K7 in any length suitable for and including tyton joints laid in trenches including necessary cut to length to match the existing fitting / pipes incl taking up or down old unsv pipe making good of disturbed surfaces of roads, path ways etc. complete all as specified and directed. 6 All as per Srl item No. 6 but 100mm bore complete all as specified and directed. 7 All as per Srl item No. 6 but 80mm bore complete all as specified and directed. 8 M&L for taking up or down 80 to 150 mm bore Cast Iron water mains (including all fittings), with spigot and socket ends and lead joints cleaning the pipes free from sedimentation / scaling etc. and re-laying the same in trenches, on the ground or on supports or fixed to walls incl testing complete all as specified and directed. 9 Note for item No 1 to 9 :- Earth work shall be measured and paid separately. 10 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for laying of Cable or Pipe, electric pole, stay assembly etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ losse soil complete all as specified and as directed. 11 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/ losse soil complete all as specified and as directed. 12 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointin soft/ losse soil complete all as specified and as directed. 13 M&L forhorizontal boring for road crossing for laying upto 200 mm bore water supply pipe lines across under roads, foot path etc. and making good disturbed areas as beforecomplete all as specified and directed. 14 M&L for lead joint and testing for 80 to 100 mm bore CI/DI pipe including spun yarn etc. for spigot & socket pipes and fittings complete all as specified and directed. 15 All as per Srlitem No. 14 but 150mm bore complete all as specified and directed. 16 M&L for CI or DI fittings for spigot and socket pipes such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces, D clamps, angle branch, cross (all sockets or socket & spigot collars, caps and plugs for joining up to 200 mm bore CI pipe in repairs complete all as specified and directed. 17 S&F and testing, 80mm dia CI non rising type sluice valve both ends flanged with CI body, ISI marked, IS 14846, pressure PN 1.6 with brass spindle with clamps and check nuts, operating hand wheel including dismantle and remove the unserviceable sluice valve complete all as specified and directed. 18 All as per Srlitem No. 17 but 100mm bore complete all as specified and directed. 19 All as per Srlitem No. 17 but 150mm bore complete all as specified and directed. 20 Supply and fix Dual plates CI wafer type Non Return / Check Butterfly valve, 100 mm bore tested to pressure of 15Kg/Sqcm flanged type including necessary heavy duty gasket, G I Bolts, G I Nuts, G I Washers etc. incl taking down old u/s complete all as specified and directed. 21 All as per Srlitem No. 20 but 150mm bore complete all as specified and directed. 22 M&L for dismantling of defective 80 mm dia sluice valve for repairssuch as repacking stuffing box of sluice valve spindle, refacing, grinding, stuffing and threading of spindle, replacement of worn out check nut, repairs to gate assembly replacement of jointing materials such as rubber sheets, nuts, bolts & washers, gland rope and refixing in its original position, testing on completion etc. complete all as specified and directed. 23 All as per Srlitem No. 22 but 100mm bore complete all as specified and directed. 24 All as per Srlitem No. 22 but 150mm bore complete all as specified and directed. 25 S&F and testing, 20 mm bore, gun metal gate valve / ball valve, ISI marked, hand lever / iron wheel head operated, screwedat both ends for iron pipes and fixed including taking down of old unsv gate valve complete all as specified and directed. 26 All as per Srlitem No. 25 but 25mm bore complete all as specified and directed. 27 All as per Srlitem No.25 but 40mm bore complete all as specified and directed. 28 All as per Srlitem No.25 but 50mm bore complete all as specified and directed. 29 S&F CPVC Ball valve 50mm OD alongwith necessary leak proof CPVC paste / gum incl taking down old u/s complete all as specified and directed. Make Astral / Supreme / Finolex 30 All as per Srlitem No.29 but 40mm bore complete all as specified and directed. 31 All as per Srlitem No.29 but 32mm bore complete all as specified and directed. 32 All as per Srlitem No.29 but 25mm bore complete all as specified and directed. 33 Supply & laying in trenches / floor or fixed to wall / roof using suitable size MS Clamps duly painted, CPVC pipes SDR 11 and incl plain CPVC SDR 11 fittings of size 50mm OD alongwith necessary leak proof CPVC paste / gum incl taking down old u/s complete all as specified and directed. 34 All as per Srlitem No.33 but 40mm bore complete all as specified and directed. 35 All as per Srlitem No.33 but 25mm bore complete all as specified and directed. 36 M&L for repair / rectification of leakages in water supply distribution GI lines of 20 to 25 mm dia incl necessary excavation, returning filling as per site requirement, tightening of loose joints of GI unions, elbows, sockets, tees etc. cutting / threading if required all as directed.Note:The complaints for the above work are to be collected by the contractor rep from MES maint incharge of EBS Babugarh on daily basis and trades men are to be detailed immediately. Required stationery such as complaint register, Job cards etc shall be arranged and maintained by the contractor. Transport and Tools required for attending the complaints are to be arranged by the contractor. 37 All as per Srlitem No.36 but GI tubing 40 to 50 mm dia complete all as specified and directed. 38 M&L for attending break down of water supply pipe line and repair to CI / DI water mains of size 80 mm to 150 mm dia at a given notice including necessary excavation, earth work by manual or using special T&P such as JCB etc. dewatering from the trenches by using pumps or any other mode, rectification of leakages, fixing of CI specials such as collars bends / tail peaces / D-clamp joints etc. and arresting the leakage, testing all as directed. Note: Specials, joint materials only measured and paid separately. 39 M & L for Construction of brick masonry valve chamber of size 1000 x 1000 x 1000 mm (Internal dimenssions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate 150 mm thick, 150 mm wide off sets allround over 100 mm thick hard core, brick masonry walls built in CM 1:6, 50 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally and 150mm below GL externally and top of floor including excavation, earth work in soft / loose soil, 5 mm thick MS sheet cover fixed on 50 mm x 50 mm x 6 mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of red oxide primer including disposal of surplus soil to a distance not exceeding 50 m etc. complete all as specified and directed. 40 All as per Item No. 39 but of size 600x600x600 complete all as specified and directed. 41 M&L for cleaning of 100000 Gallon RCC over head reservoir of any type, any height using construction of staging or by mechanical means for carrying out the inner surface of the walls and ceilings of the tank shall be cleaned with high pressure jet pump after emptying the water in the tank. After thorough cleaning of the tank, the cleaning water and sludge is to be removed by using pump and the sludge has to be disposed off at a place as directed. After removing thesludge from tank, the tank shall be cleaned thoroughly by using high pressure water pump first and again cleaned the tank by using high pressure vaccume pump and after removing the sludge / dirt completely from the tank the floor and inner surfaces of the tank shall be cleaned by using a industrial vaccum cleaner and the tank shall be made fully dust free. After made the tank dirt free the inner surfaces of walls and ceiling of the tank shall be treated with anti bacterial agents. After the treatment as mentioned above, the inner surface of walls and ceiling shall be treated with UV Radiator. After complete treatment is carried out, the all pipes inlet, over flow, delivery, wash out, ladder and doors shall be painted with two coats of synthetic enamel black paint after thorough cleaning the surfaces and also the surfaces of sluice valves shall be painted with PO red paint and writing Capacity of tank, date of cleaning and due date of cleaning on wall as specified and as directed. Incl replacing of u/s wire mesh of ventilations of the tank with new mesh complete all as directed BY Engineer-in-Charge.Notes for item No : (1) The unit rate quoted deemed to be including draining of water with mechanical equipment and working in water and mud etc. (2) The unit rate quoted deemed to be include all safety precautions which shall be taken while working on RCC over head tank / under ground sump and contractor or his engineer shall be available during execution of the job. (3) Lightning arrangements if required to be provided by the contractor temporarily at his own arrangements and the amount quoted for that is deemed to be inclusive in the unit rate and electricity/ diesel shall not be provided by MES. 42 Disconnecting the suction and delivery pipe line and electric connections of submersible pump set 25 / 30 HP and removing it from its original position alongwith pipes and fittings carefully by using chain pulley and tripod, transporting the same to the authorised work shop for necessary maint / repairs and refixing the same in its original position after repairs by lowering along with pipes including connecting up of water and electric connections including testing andcommissioning complete all as specified. (Depth of bore welll is upto 50 Mtr). Note: Expendable stores like cotton waste / cleaning materials, lubricants, gland packing, metal filling, machining and transportation to and from site to work shop and labour element are deemed to be included in rate quoted. 43 M&L for rewinding ofthesubmersible motor with super enamelled Copper conductor of good quality, same gauge and same No. of turns as that of existing including tying the winding and connecting the coils and bringing the connections as that of existing complete all as specified including applying insulating varnish, heating and backing the windings thoroughly for submersible motor 25 / 30 HP capacity. 44 M&L for Opening theSubmersible pumpset up to 30 HP pump sets for inspection, repairs and reassembling the pump and motor as per the original assembly after repairs / replacing the worn out unserviceable parts with new parts as ordered, including cleaning replacing the minor items like packing bolts, nuts washers and MS clamps etc and applying one coat of approved hammertene spray paint on exposed steel surface, making the pump and motor fully serviceable and testing after refixing and commissioning all as directed for satisfactory operation on its full load. Note: Spare parts will be measured and paid under relevant item separately. All minor consumables / Eqpt / Tpt required shall be deemed as included in the rates quoted. 45 Supply only Motor bearing, bush complete set inlet/outlet side suitable for submersible pump set up to 30 HP capacity complete all as specified and directed. 46 All as per Srlitem No.45 but Impeller complete all as specified and directed. 47 All as per Srlitem No.45 but Pump NRV complete all as specified and directed. 48 All as per Srlitem No.45 but SS sleeves complete all as specified and directed. 49 All as per Srlitem No. 45 but Neck ring stage casing complete all as specified and directed. 50 All as per Srlitem No.45 but Sand guard complete all as specified and directed. 51 All as per Srlitem No.45 but Oil seal complete all as specified and directed. 52 All as per Srlitem No.45 but Bowel case complete all as specified and directed. 53 All as per Srlitem No.45 but stainless steel shaft of standard size complete all as specified and directed. 54 S&F in repairs, flexible submersible cable 3 core 10 Sqmm with stranded Copper conductor, 1100 volts grade,PVC insulated, PVC sheathed, connecting with necessary end ferrules / water proof joints complete all as specified and directed. 55 S&F in repairs, fully automatic star delta motor starter suitable for 25 / 30 HP submersible pumpset, 3 phase, 415 V with relay range of 45 to 75 Amps incl enclosure complete all as specified and directed. . Make - Havells/Schneider/L&T 56 Supplying, installing, erecting, testing and commissioning, factory made and tested, pump panel board outdoor type, dimensions not less than 1.0 m (L) X 0.5 m (W) X 1.2 m (H), suitable for 3 phase, 415 Volts, 50 Hz system with 200 Amps capacity aluminium bus bar. The panle should be dust and vermin proof, IP 56 class protection and made of 3.15 mm thick CRCA MS sheet with doble door, both sides openable inclusive of locking arrangement, suitable opening for vent and cable entry consisting of Electronic fully automatic star delta starter-01 No. having automatic phase sequence corrector, programmable time with input supply by MCCB of 100 Amps rating, digital type Ammeter and Voltmeter, selector switch, CTS, RYB including indication lampsetc, suitable for submersible pump-motor set of size 25/30 HP, erected on 50X50X6mm thick angle iron frame work, bottom channel of size: 70X40X5 mm powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside , grouted in floor including complete earth work such as excavation, removing and returning filling and required PCC work for the erection of the panel board, complete all as specified and as directed. 57 S&F in repairs, Pressure Gauge, 100mm dia, 0 - 14 Kgs rating complete all as specified and directed. 58 Supply of Calcium hypochlorite having 65% to 70% strength chlorine for disinfection purpose in white coloured powder form for water treatment in sealed non returnable containers in the store yard of EBS Babugarh complete all as specified and directed. Make- RENSA/Purichlor 59 M&L for repairs of dosing system consisting of Syntex make 100Ltr capacity poly Ethelene (PE) tank, Fibre reinforced plastic (FRP) lid have port hole for pouring calcium based granual disinfectant chemical and water when necessary and operatedwith 1 phase motor , 240V complete to the satisfactory operation of the system complete all as specified and directed. 60 M&L for the existing Microprocessor based circuit type water level device consist of seven segment 2 LED display fitted in the control panel operated the pump to automatic switch off when the water level in OH tank reaches the maximum level, visual display with audio alarm on low water level in tank complete to the satisfactory operation of the system complete all as specified and directed. 61 M&L for Structural Steel Work, made out ofFe 410-W (Gde-E-250) quality-A Rolled Mild Steel Channel, Angle or Tee Sections, MS sheet with hinges & locking arrangementsetc. cut to shape / ordinary length, drilled and countersunk for Screws / Bolts, including bending and welding duly painted with 2 coats of Anti Corrossive Synthetic enamel paint over a coat of Zinc Chromate complete all as specified and directed. 62 M & L for carrying out B check of 320 KVA DG set through authorised service dealer of the manufacturer including replacement of B check service kit complete all as per manufacturers standards complete all as specified and directed. 63 All as per Srlitem No.62 but for 50 KVA DG set complete all as specified and directed. 64 All as per Srlitem No.62 but for 15 KVA DG set complete all as specified and directed. 65 M&L for draining out old engine oil, S&F Engine lubricanting oil conforming to the engine manufacturer requirement of classification SAE 15 W 40 lube oil complete all as specified and directed.Make : Servo / Castrol 66 M & L for Overhauling of radiator including dismantling from engine,opening of radiator, cleaning of radiator tubes, fans with acid and removing the scaling & dust, brazing the copper tubes, arresting the leakages completely etc, including renewal of all connecting parts i.e. radiator hose pipe with clamps, bolts, nuts, washers, rubber bush packing material, etc. and re assembling the radiator and fixing with DG set properly in original position, checking the alignment, making proper hose connection, testing for smooth operation complete all as directed for DG set of any type/make having capacity of 320 kVA.NOTE: The cost of renewed parts is deemed to be included in unit rate quoted by contractor. No extra cost shall be paid to the contractor for the same. 67 All as per Srlitem No.66 but for 50 KVA DG set complete all as specified and directed. 68 All as per Srlitem No.66 but for 15 KVA DG set complete all as specified and directed. 69 M&L for taking out injector of DG set of capacity 320 kVA, disconnection and opening of fuel injector assembly, carrying complete overhauling/servicing of fuel injector system, including replacement of injector kit, checking of pressure, complete for each injector and reassembling the same in original positionby making proper fuel connection and testing for smooth operation complete all as specified and directed.Note: Cost of renewal of parts to be measured and paid separately. 70 Supply only nozzle holder for 320 kVA DG set of any make complete all as specified and directed. 71 M&L for opening /taking out fuel injection pump (FIP) of DG set of any type/make of capacity 320 kVA, disconnecting of fuel injector line, carrying out complete overhauling servicing of injector pump, calibration of fuel pump as per manufacturer instruction, assembling of the same wit DG set properly in original position, checking the alignment, making proper fuel connection including renewal of unserviceable/defective minor parts like seal O ring, fuel pump gasket, gear, technometer, bushing, technometer cover, fuel pump, gear housing, fuel pump gear, etc. and testing for smooth operation complete all as directed after renewal of following major parts if found defective/unserviceable.NOTE: The cost of renewed parts is deemed to be included in unit rate quoted by contractor. No extra cost shall be paid to the contractor for the same. 72 Supply only Plunger and return spring for 320 kVA DG set of any make/type complete all as specified and directed. 73 Supply only control rod for 320 kVA DG set of any make/type complete all as specified and directed. 74 Supply only Plunger barrel for 320 kVA DG set of any make/type complete all as specified and directed. 75 Supply only delivery valve and spring for 320 kVA DG set of any make/type complete all as specified and directed. 76 Supply only HP line for 320 kVA DG set of any make/type complete all as specified and directed. 77 Supply only pump element for 320 kVA DG set of any make/type complete all as specified and directed. 78 Supply only roller tappet for 320 kVA DG set of any make/type complete all as specified and directed. 79 Supply only nozzle for 320 kVA DG set of any make/type complete all as specified and directed. 80 Supply & fix flexible coupling for 320 KVA DG Set including alignment of alternator with engine complete all as specified and directed. 81 All as per Srlitem No.80 but50 KVA DG set complete all as specified and directed. 82 All as per Srlitem No.80 but 15 KVA DG set complete all as specified and directed. 83 M & L for alternator servicing, decarbonising the alternator coils, re-varnishing, heating, bearing checking, re-greasing and termination, tinning for 320 KVA DG Set complete all as specified and directed. 84 All as per Srlitem No.83 but for 50 KVA DG set complete all as specified and directed. 85 All as per Srlitem No.83 but for 15 KVA DG set complete all as specified and directed. 86 Supply and filling coolant of superior quality complete all as specified and directed. Make Servo / Castrol 87 M&L for cleaning of diesel tank of DG Set 320 KVAincluding replacement of worn-out pipe line and measuring scale and fixing in original position and make it leak proofwith necessary clamps complete all as specified and directed. 88 Supply and fixing battery 12V 180 AH including replacement of terminals and connecting lead suitable length and size of multi stranded copper wire complete all as specified and directed. .Make:- Exide/Amaron 89 All as per Srl item No.88 but 12V,100 AH complete all as specified and directed. 90 Dismantling of burnt/defective wiring system of DG Set 320 KVA and M&L for complete wiring of required size with sleeves thimbles, lugs etc for DG set complete all as specified and directed. 91 All as per Srlitem No.90 but for 50 KVA DG set complete all as specified and directed. 92 All as per Srlitem No.90 but for 15 KVA DG set complete all as specified and directed. 93 Disconnection and taking out the unserviceable turbo charger assembly of DG Set 320 KVA and taking to workshop, strip opening of turbo charger and replacement of repair kit, re-assembling and fixing back to engine and testing complete all as specified and directed. 94 All as per Srlitem No.93 but for 15 to 50 KVA DG set complete all as specified and directed. 95 M & L for servicing, repairing, maintenance of self starter assembly of DG Set 320 KVA, complete with replacement of switch magnet,bush gear, O ring assembly, bush set, sealing kit, clutch assemble with new ones and refixing the same in original positioncomplete all as specified and directed . NOTE: The cost of replacement of items mentioned in the description is deemed to be included in the rate quoted by the contractor and no extra payement will be done for replacing those items. 96 Supply only armature for 320 kVA DG setcomplete all as specified and directed. 97 Supply only solenoid switch for 320 kVA DG set complete all as specified and directed. 98 Supply only field coil for 320 kVA DG set complete all as specified and directed. 99 All as per Srlitem No 96but for 15 to 50 KVA DG set complete all as specified and directed. 100 All as per Srlitem No 97but for 15 to 50 KVA DG set complete all as specified and directed. 101 All as per Srlitem No 98 but for 15 to 50 KVA DG set complete all as specified and directed. 102 Supply & Replace Fan belt set of existing size complete of DG Set 320 KVAcomplete all as specified and directed. 103 All as per Srlitem No. 102 but for 15 to 50 KVA DG set complete all as specified and directed. 104 Supply & Replace Oil temperature gauge 0-130C complete all as specified and directed. 105 Supply & Replace Water temperature gauge 0-130C complete all as specified and directed. 106 Supply & Replace DC ammeter 0-50 complete all as specified and directed. 107 Supply & Replace Tachometer 0-2500 RPM complete all as specified and directed. 108 Supply & Replace Ignition switch DC with Key complete all as specified and directed. 109 Supply & Replace Oil pressure gauge 0-7 Kg/Cm complete all as specified and directed. 110 Supply & Replace Distilled Water complete all as specified and directed. 111 Supply & Replace Battery lead terminals complete all as specified and directed. 112 S & F automatic battery charger for 12/24V battery complete with all necessary controls and fixing arrangments complete all as specified and directed. 113 S&F in replacement of DG set door lock with handle with double key of all doors of DG set canopy of any capacitycomplete all as specified and directed. 114 S&F in replacement of Automatic voltage Regulator (AVR) suitable for DG Set of320 KVAcapacity with and including taking out old AVR and making all connectiontesting for smooth operation complete all as specified and directed. 115 All as per Srlitem No above here-in-before butfor 50 KVA DG set complete all as specified and directed. 116 Supply, fixing & testing Volt meter 0-500 Volts, 96mm x 96mm, digital type complete all as specified and directed. Make : AE/ Rishab/Meco/Enercon. 117 Supply, fixing & testing Ammeter 0-400 Amps, 96mm x 96mm, digital type complete all as specified and directed. Make : AE/ Rishab/Meco /Enercon. 118 S&F in repairs, thermal over load relay of various ranges starting from 3 Amps to 15 Amps complete all as specified and directed. Make : Type ML0 to ML 1.5 of L&T /BCH/ C & S Electric / Siemens. 119 S&F in repairs, thermal over load relay of various ranges starting from 9 Amps to 42 Amps complete all as specified and directed.Make : Type ML2/ML3 of L&T or equivalent of BCH/ C & S Electric / Siemens. 120 S&F in repairs of single phase preventor, auxiliary volts 415 volts, suitable for 3 phase AC supply complete all as specified and directed. 121 S&F in repairs, testing push buttons with thermo plastic body actuators with carrier having flush type push button complete all as specified and directed.Make : BCH/C & S Electric /L&T / Siemens. 122 S&F in repairs, testing pilot lamps LED type with integral circuit & cluster LED suitable for operating at 240 /220 Volts complete all as specified and directed. Make : BCH/C & S Electric /L&T / Siemens. 123 Preparation of the existing surfaces of electric panels of any description and size & applying two coats of synthetic enamelled paint of approved shade complete including writing details & information on its panels with paints in the pattern & style to match with the words as existing all as directed. 124 M&L for preventive maintenance and servicing of AMF panel of any capacity DG set installed at site incl checking of connections of cables and tightening of loose wiring, nuts and bolts of panel andbus bar chamber. The cost includes minor items like replacement oflugs, control wiring and ferrules etc. complete all as specified and directed. 125 S&F in replacement, asbestos rope of 19 mm dia around of the exhaust pipe of diesel engine any cap complete all as specified and directed. 126 M&L for repair of burnt / perished cable ends on incoming and outgoing feeders of panel equipments and other machinery including cutting of burnt ends preparing / dressing of cables end crimp with suitable size of cable lugs (cable lugs will be measured and paid seperately) incl providing, fixing suitable nuts / bolts / washers etc. forupto 95Sqmm 3.5 core cable 127 All as per Srlitem No.1 but 120Sqmm to 240 sqmm 3.5 core complete all as specified and directed. 128 S&F Al lugs for cable size 50 to 70 sqmm complete all as specified and directed. 129 S&F Al lugs for cable size 95 to 120 sqmm complete all as specified and directed. 130 S&F Al lugs for cable size 240 to 300 sqmm complete all as specified and directed. 131 S&F in replacement,synthetic rubber insulated mats in replacement forinstallations size 2 mtr X 01 mtr X 2.5 mm thick, for voltage upto 11 kV, ISI marked, as per IS 15652-2006 complete all as specified and directed. 132 M&L for repairs of existing On Load/off load Change Over Switch, 4P, 400 Amps, 415 volts by cleaning/ decarbonising,replacement of worn out contacts,lugs and handle arrangement to the smooth function of the item complete all as specified and directed. 133 S&F in repairs of Off load change over switch 4 pole, 415V, AC , 100 A rating with enclosure type complete all as specified and directed. . Make- HPL 134 S&F in repairs, connect,MCCB 4 Pole, 415V, adjustable type, 400 Amps,breaking capacity of 36 KA with cable separators complete all as specified and directed. 135 All as per Srlitem No.9 but 200 Amps, 36KA complete all as specified and directed. 136 All as per Srlitem No.9 but 160 Amps, 36 KA complete all as specified and directed. 137 All as per Srlitem No.9 but 100 Amps, 16 KA complete all as specified and directed. 138 S&F in repairs, connect,MCCB 3 Pole, 415V, 125 Amps, 16 KA complete all as specified and directed. 139 All as per Srlitem No.13 but 63 to 100 Amps, 16KA complete all as specified and directed. 140 Testing and calibration of HT VCB 11 KV complete with primary and secondary test as required including checking of wiring of all electrical measuring instrument and resetting of relay and proper alignment mechanical system for smooth functioning and tripping at any type offault developed in feeders complete all as specified and directed by Engineer-in-Charge. Note:Contractor will submit primary and secondary test record at the time of calibration of HT VCB, duly signed by the technical rep of manufacturer/authorised dealer to Engineer in Charge. The rate quoted by the contractor shall be deemed to include the cost of this provision incl T&P required for injecting regulated high current. 141 Disconnecting of HT supply from 11 KV VCB of any make/type/capacity for repair works, servicing and taking out trolley with completedecarbonizing the contactpoints, cleaning with CRCsolution and inner body clean with vaccum cleaner etc and incl replacement of defective minor parts like lugs, terminals, ferrule,control wiring, nut bolts, HRC fuse links etc found during servicing. Reassembling and testing of relays for trippingtime setting over current setting, earth fault setting etc including checking of vaccume interrupter, tripping mechanism etc after servicing complete all as specified and directed by Engineer-in-Charge. 142 M&L for servicing/repair of VCB spring charging motor 24/220 Volt DC/AC for 11KV VCB, of existing make, type, size, capacity with driving gear including ensuring the manual operation of charging complete testing to the satisfactory operation of VCB charging complete all as specified and directed. Note: (1) HT VCB above servicing shall be carried out only by qualified and experienced person and prior approval shall be obtained from GE.(2) The major spare parts required during above servicing will be measured and paid separately under relevant item of schedule. 143 Supply only open/closed auxiliary contacts suitable for upto 630 Amps HT VCB fixed in repairs. As per existing sample. 144 Supply only under voltage release suitable for upto 630 Amps HT VCB fixed in repairs. As per existing sample. 145 Supply only under/over frequency release suitable for upto 630 Amps HT VCB fixed in repairs. As per existing sample. 146 Supply only Shunt trip closing coil assembly 110/220 volts, DC/AC suitable for upto 630 Amps, HT VCB complete all as specified and directed. 147 Supply only Shunt trip tripping coil assembly 110/220 volts, DC/AC suitable for upto 630 Amps, HT VCB complete all as specified and directed. 148 Supply only spring charging Motor Cut off switch as per existing samplesuitable for 11 KV VCB complete all as specified and directed. 149 M&L for cable jointing kit for 11 KV (Earthed) grade for indoor terminations heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120sqmm to 185 sqmm incl taking out old jointing kit of any make and type complete all as specified and directed. 150 All as per Srlitem No.149 but out door type of size 120 to 185 sqmm HT cable complete all as specified and directed. 151 All as per Srlitem No.149 but out door type of size 95 sqmm HT cable complete all as specified and directed. 152 M&L for cable jointing kit for 1100 volts grade (LT cable) for outdoor terminations heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 240 sqmm to 300 sqmm incl taking out old jointing kit of any make and type all as specified and directed. 153 All as per Srl item No. 152 but for LT cable of size 120 sqmm to 185 sqmm complete all as specified and directed. 154 M&L for laying in repairs of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor, 11000 volts earthed grade of size 95 sqmm 3 core cable laid in trenches/ ducts or fixed to walls / poles or passed through pipes all as directed. 155 All as per Srlitem No.154 but out door type of size 3 core x 120 sqmm complete all as specified and directed. 156 Supplying laying and testing XLPE insulated ,armoured , electriccable (heavy duty)1100 volt grade with stranded aluminium conductor, laid in trenches / ducts or fixed to walls / poles or passed through pipesscomplete all as specified of following sizes :- 157 All as per Srl item No.156 but 240 Sqmm, 3.5 core cable complete all as specified and directed. 158 All as per Srl item No.156 but 120 Sqmm, 3.5 core cable complete all as specified and directed. 159 All as per Srl item No.156 but 95 Sqmm, 3.5 core cable complete all as specified and directed. 160 All as per Srl item No.156 but 70 Sqmm, 3.5 core cable complete all as specified and directed. 161 All as per Srl item No.156 but 50 Sqmm, 3.5 core cable complete all as specified and directed. 162 All as per Srl item No.156 but 35 Sqmm, 3.5 core cable complete all as specified and directed. 163 All as per Srl item No.156 but 25 Sqmm, 3.5 core cable complete all as specified and directed. 164 All as per Srl item No.156 but 16 Sqmm, 4 core cable complete all as specified and directed. 165 All as per Srl item No.156 but 10 Sqmm, 2 core cable complete all as specified and directed. 166 All as per Srl item No.156 but 6 Sqmm, 2 core cable complete all as specified and directed. 167 M&L for fixing PCC cable route markers of size 700X240X75 mm at top of cable trench complete all as specified and directed. 168 Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct or inside the premises of transformer yard complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose. 169 M&L for laying burnt clay fly ash old size bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over under ground cable for protection complete all as specified and as directed. 170 M&L for Galvanized steel tubing, light grade, with all fittings for protection of cable including taking down old, rusted & corroded unsv Galvanized steel tubing complete all as specified and as directed of the following sizes:- 171 100mm bore complete all as specified and directed. 172 80mm bore complete all as specified and directed. 173 50mm bore complete all as specified and directed. 174 40mm bore complete all as specified and directed. 175 M & L for cutting hard standing/ Road cutting for taking up or laying of LT UG cable upto a depth of 15 cm and after laying of cable, well ramming to the excavated soil and repair the cutting/ exvcavated portion of road as existing or by providing suitable mixture of PCC complete all as specified and as directed. 176 M&L for providing PCC 1:4:8, type D-2, (using 40 mm graded stone aggregate) as in foundation for erection of poles complete inclding breaking and removing the old concrete complete all as specified and as directed. 177 M&L for providingPCC 1:2:4, typeB-1 (using 20 mm graded stone aggregate) as incoping to pole etc., including breaking and removing the old concrete and providing necessary form work complete all as specified and as directed. 178 M&L for lightning arresters expulsion type complete with all fittings, transmission class, max discharge capacity 65 kA suitable for 11000V grade including taking down existing unsv damaged lightening arrestor complete all as specified and as directed. 179 M&L for switch air break, gang operated, triple pole, mechanically operated, vertical/ Horizontal out door type, mounted on insulators and steel frame with operating mechanism worked from ground level for current rating upto 400 Amps suitable for 11000 volts grade complete all as specified and as directed. 180 M&L for 11000V grade, expulsion type fuses, single pole, mounted on insulators and steel frame of current rating 50 Amps including taking down old unsv expulsion fuse unit complete all as specified and as directed. 181 Surface excavation not exceeding 30 cm deep and averaging 20 cm deep and getting out in soft/ loose soil, removing of bushes, roots etc., in the transformer/ sub station yard and surrounding of two or four pole structres, treating the excavated area with anti vegetation growth chemicals, complete all as specified and directed. 182 M&L for loose filling with aggregates of gauge 40 to 80 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 20 cm thick, watered and rammed to a true surface of transformer/ sub station yard and two pole / four polestructure complete all as specified and as directed. 183 Isolating the transformer/ voltage stabilizer by carefully dismantling the HT / LT and earth connections, draining out the oil from transformer to the required level and storing in cleaned container, opening the top cover of transformer/ voltage stabilizer and conservator tank from transformer, rectifying the defects and dismantling & replacing burnt out LT/ HT bushes, making all HT / LT connections as per the original, re-filling the transformer oil to the required level, replacing required oil seals & top cover gasket including replacing rusted unsv nut, bolt & washers and testing on completion and refixing the same for capacity upto 250 KVA complete all as specified and as directed. NOTE: (1) LT/ HT bush, transformer oil for topping up and gasket will be measured and paid separately as supply only items under relevant items of schedule 184 Disconnecting the HT/ LT connection, taking out the transformer/ voltage stabilizer from its plinth at any situation with the help of suitable crane and transporting the transformer/ voltage stabilizer to workshop for carrying out necessary repairs and bringing back and re-install in its original place of capacity upto 250 KVA complete all as specified and as directed. 185 Taking out complete core from transformers/ Voltage stabilizer of capacity upto 250 KVA cutting and removing burnt out copper/ aluminium winding and re-winding the same with super enamelled copper conductor of existing gauge togetherwith insulatingmaterials, applying varnish, drying in heating chamber, re-assembling the transformer as per the original and testing on completion complete all as specified and as directed. NOTE: Shifting of transformers/ Voltage stabiliser from installed position to civil workshop and back will be measured and paid separately under relevant items. 186 M&L for transformer/ voltage stabiliser oil filtration for removing sludge, dust, dirt and moisture from the oil, with the filtered oil having breakdown voltage (BDV) greater than 30 kV (avg) at 2.5 mm gap. NOTE: Contractor will submit BDV test value of the filtered oil after the filtration process duly signed by the technical rep of the manufacturer/authorised dealer to Engineer in Charge. The cost of this provision incl required T&P for getting the oil tested for BDV value is deemed to be included in the rate quoted by the contractor. 187 Supply only transformer oil for topping up in transformers/ Voltage stabilizer complete all as specified and as directed.. Make:Poweroil/Transol GET complete all as specified and directed. 188 Supply only bush of capacity 100 KVA Transformer 11KV/433V type complete all as specified and directed. 189 Supply only bush of capacity 250 KVA transformer 11KV/433V type complete all as specified and directed. 190 Supply only silica gel complete all as specified and directed. 191 M&L for silica gel breather and oil cup, including sufficient quantity of silica gel along with oil filling in the cup if oil level in the cup is not up to the mark, complete all as specified and as directed for thefollowing capacities of transformer:- NOTE: The cost of oil is deemed to be included in the rate quoted by the contractor. 192 Transformer of capacity 100 KVA complete all as specified and directed. 193 Transformer of capacity 250 KVA complete all as specified and directed. 194 M&L for preparation of old painted surfaces of HT 11 KV four pole structure and painting with two coats of aluminium paint over a coat of red oxide primer on all steel surfaces such as poles, channels, angles and clamps of any description and providing 04 Nos bands/ straps with synthetic enamel paint (black and white 30 cm wide each) from top of plinth block complete all as specified and as directed.. 195 All as per item No. abovehere-in-before but of two pole structure complete all as specified and directed. 196 Dismantling damaged steel tubular poles/ struts of any size complete complete all as specified and as directed. 197 M&L for erection of steel tubular, swaged poles complete with cast iron base plate of size 300 x 300 mmfinial taper plug, cap, bolts, nuts, washer and screws as specified confirming to IS type 410 SP-31 (9 M long), providing through hole of 14 mm diameter at a height of 300 mm above the planting depth for earthing arrangements, inclusive of coated with two coats of black bituminous paint throughout internally and externally up to the planting depth and the remaining portion of the exterior shall be painted with two coats of silver aluminium paint over one coat of red oxide primer complete all as specified and as directed. (Note : Excavation, earth work, PCC foundation, coping shall be measured and paid sepearately under relevnt items). 198 M&L for erection of steel tubular, swaged poles complete with cast iron base plate of size 300 x 300 mmfinial taper plug, cap, bolts, nuts, washer and screws as specified confirming to IS type 410 SP-55 (11 M long), providing through hole of 14 mm diameter at a height of 300 mm above the planting depth for earthing arrangements, inclusive of coated with two coats of black bituminous paint throughout internally and externally up to the planting depth and the remaining portion of the exterior shall be painted with two coats of silver aluminium paint over one coat of red oxide primer complete all as specified and as directed. (Note : Excavation, earth work, PCC foundation, coping shall be measured and paid sepearately under relevnt items). 199 M&L for fixing stay assembly having 20 mm diameter of stay rodincluding loop type insulator, stay clamps, etc complete with accessories as shown in electrical plate No. 1 (Excavation and Concrete work will be measured separately) complete all as specified and directed. 200 Releasing the binding of ACSR conductor of LT/ HT OH lines comprising 3 Phase 3/ 4 wire or single phase 2 wire inclduing street light conductor & earth wireof line from insulator, removing the jumper, connector, service wire, disconnecting the connection of UG cables and restreching & stringing of existing LT/HT OH lines, any size, length and span upto desired sag and rebinding the ACSR conductor on insulator, reconnecting the UG cable etc with and including suitable binding/ jumper material with aluminium wire and trimming the tree branches upto 1.5m distance around conductor to make the line functional complete all as specified and as directed. . Note: (a) Jumper/ binding material shall be deemed incldued in the rate quoted by contractor. (b) Trimming of tree branches shall be measured and paid separately under relevant items. (c) Any type conductor and any number of runs between the poles shall be measured as one span for the purpose of payment. 201 Material & Labour for attending break down/ emergent repair immediately on intimation and rectify the External electric supply complaint on LT/HT overhead lines/ under ground cable alongwith necessary T&P, safety devices etc. as per site requirement complete all as specified and as directed for the following:- 202 M&L for jointing of LT/ HT OH line in case of breaking of conductor and refreshing of wornout jumper by suitable jumper/ binding materials complete all as specified and directed. 203 Disconnecting worn out under ground cable from over head conductor, cutting down worn out portion of under ground cable of any type and size for repairs and taking out under ground cable loop from ground by excavating and all neccessary earth work and making fresh connection for restoration of electric supply complete all as specified. Note: Excavation, earth work, taking out cable protection covers, & sand cushion and relaying the same shall be deemed incldued in the rate quoted by contractor 204 Disconnecting worn out under ground cable of any type and size from main switch board/ any type of switch gear system including change over switch etc. for repair and taking out under ground cable loop from ground by excavating and all necessary earth work and making fresh connection by proving suitable size of lugs for restoring of electric supply complete all as specified. Note: Jointing material, Lugs etc and Excavation, earth work, taking out cable protection covers, & sand cushion and relaying the same shall be deemed included in the rate quoted by contractor 205 M&L for ACSR conductor in OH lines of HT/ LT/ street light conductor (Squirrel/ Weasel) including jumper and binding material with aluminium wire complete all as specified and directed. 206 M&L for cradle guard, hexagonal/ rectangular or as per existing shape fabricated with galvanised steel wire 4 mm dia including binding the gaurds with cradle supproting GI wire inclduing taking down existing unsv gaurd wire complete all as specified and as directed. 207 M&L for trimming of tree branches around HT / LT overhead lines including cutting and removing any foreign material like bushes or shurbs complete and removing the trimmed/ cut down branches/ bushes/ shrubs and depositing where directed at a distance not less than 100m complete all as specified and as directed.Note:- (a) The item will be measured in span length. The approx span length is 35M to 50M. (b) The cost for T&P and transportation required shall be deemed included in the rate quoted by contractor. 208 Supply and replace PVC spacers suitable for 2 wire sagged ACSR conductor complete all as specified and as directed. 209 Supply and replace PVC spacers suitable for 4 wire sagged ACSR conductor complete all as specified and as directed. 210 M&L for Pin type, porcelain, vitreous, white, brown or green insulators including one galvanised mild steel spindle, two galvanized iron washers and one galvanized iron nut, 100 mm height, 65mm dia for 1100 volts grade complete all as specified and as directed. 211 All as peritem no. 88 but height 150mm, dia 150 mmm for 11000 volts grade complete all as specified and directed. 212 M&L for shackletype, porcelain, vitreous, white, brown or green insulator includinggalvanised mild steel straps,washers, insulator bolts andnuts, of size 100 mm height, 115mm dia for 1100 volts grade complete all as specified and as directed. 213 All as peritem no. 193 above but size 150mm height,and dia 150 mm for 11000 volts grade complete all as specified and directed. 214 S/F in repairs, 1100 volts grade heavy duty PVC sheathed stranded Aluminium conductor twin core cable flat or circular of size 6 Sqmm complete all as specified and directed. 215 All as per item No 195 above but 10 Sqmm size complete all as specified and directed. 216 M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts in any shapes or size including painted with two coats of silver aluminium paint over one coat of red oxide primer complete all as specified and as directed. 217 Scraping, cleaning and preparation of old surfaces of steel tubular pole (9 Mtr long) steel fitting complete and M&L for painting with one coat for aluminium paint after preparation of the steel surfaces and then applied strap with two coats black & white paint in strap alternatively all round the poles from the bottom of the pole for indication of the poles. Height of the strap shall be 30cm and number of strap shall be 05 Nos and all as directed by Eng-in-Charge 218 S & F in repair MCB SP 6 to 32 A, AC, 240V, 10 KA, ISI marked, either B series or C series, complete all as specified and directed. 219 S & F in repair isolator DP 40 A, AC, 240V, 10 KA, ISI Marked complete all as specified and directed. 220 S & F in repair isolator 4P 63 A, AC, 415V, 10 KA, ISI Marked complete all as specified and directed. 221 Supplying, installing, commissioing and testing of LT switchgear panel board ( Kiosk) of size not less than 600mmx600mmx500mm,IP-55 (outdoor type) , 415 Volts, 50 Hz, AC supply, three phase and neutral ( 4 wire) ,200 Amps coloured horizontal tinned Aluminium bus bars , factory made out of 3.15mm thick MS sheetstructure mounted onrigid mild steel angle iron frame of 50mmx50mmx6mm with 400mm long extended legs grouting in PCC 1:2:4 type B1 of size 150mmx150mmx250mm , duly epoxy powder coated internally and externally with approved shade, rubber gasketted, hinged front double doorand back openable doors with proper locking arrangements for dust and vermin proof ,complete including adjustable thermal and fixed magnetic release MCCB 4 pole, 100 Amps, 415V,36 KA,50 hz-01 No (incoming),suitable size cable allay,lugs , glands and making connections/ wiring with suitable size SC PVC insulated copper conductor cableall as specified. 222 Earthing complete with galvanised MS earth plate of size 600 x 600 x 6mm thick burried directly in ground not less than 2.25 Mtr below ground level, earth plate paced on all side with charcoal mixed with salt to a thickness of 150mm in layers, connected by GI earth strip of size 32 x 6mm thick, soldered and revetted to earth plate. GI earth strip will be protected by using 40mm bore GI pipe (light grade) from test point to main board. The earthing includes PCC pit chamber, RCC pit cover and frame, watering pipe 20mm bore, funnel with wire mesh with necessary earth work including disposal of surplus soil to a distance not less than 50 Mtr etc complete all as specified and shown in electrical plate No 3 of SSR Part-I. (Note : Main earth lead beyond 7.5 metre measured and paid for separately). 223 Earthing complete with galvanised MS earth plate of size 600 x 600 x 6mm thick burried directly in ground not less than 2.25 Mtr below ground level, earth plate paced on all side with charcoal mixed with salt to a thickness of 150mm in layers, connected, soldered and revetted to earth plated / galvanised earth lead wire 4.0mm dia by means of bolts, nuts , check nuts and washers of galvanised iron or steel. GI earth wire will be protected by using 15mm bore GI pipe (light grade) from test point to main board. The earthing includes PCC pit chamber, RCC pit cover and frame, watering pipe 20mm bore, funnel with wire mess with necessary earth work including disposal of surplus soil to a distance not less than 50 Mtr etc complete all as specified and shown in electrical plate No 3 of SSR Part-I. (Note : Main earth lead beyond 7.5 metre measured and paid for separately). 224 Apply proper electric shutdown of the feeder, dismantle and taking down LED street / Security light fitting of any make or modelalongwith connecting cable from elevated height of pole or building for repair by changing LED drive of suitable capacity, thorough cleaning and refixing the same after necessary repairs on its own position connecting complete all as directed. Note:- Spares of security/street light fitting shall be measured and paid under relevent supply only items. Required T & P and labour is deemed to be included in the rate quoted. 225 Supply only LED Driver suitable for any make or model LED street / security light fitting of capacity 25to 35 Watts complete all as specified and directed. 226 All as per item No 206 above but for 36 to 45 Watts complete all as specified and directed. 227 All as per item No 206 above but for 60/72 Watts complete all as specified and directed. 228 Supply only PVC sheathed two core 2.50 Sqmm stranded Aluminium conductor cable flat or round complete all as specified and directed. 229 Supply and fix 35 watts , 230V AC outdoor type (IP-65/66 protection) LED integrated street/security light fitting with all accessories incl connections and testing complete all as specified and directed. 230 All as per item No 210 above but 70 watts LED fitting complete all as specified and directed. 231 Lowering of high mast light assembly from upto 16 Mtr high mast, any make / model, dismantling, checking the serviceability and make the light fittings operational to give rated illumination incl cleaning the glass cover and refixing the same after repair / replacement of defective components complete with necessary electrical connection incl provision of two core 2.5 Sqmm PVC cable with multi stranded Copper conductor of required length, testingcomplete all as directed. Note: Flood light fitting shall be measured and paid separatelyunder relevent item. The cost of greasing of pully, roller, bearing and gear incl refixing of rope clamps , adjustment of lock, leaver, requried T & P and labour etc is deemed to be included in the quoted rate 232 Supply only LED flood light 120 watt, 230V, AC out door type with IP-66 protection with impact and corrosion resistant complete with driver complete all as specified and directed. 233 S&F LED post top light fitting IP 65 rated 20watt to light up parks, gardens and heritage sites complete all as specified and directed. 234 S&F LED bollard pressure diecast powder coated housing with PC diffuser, efficient high output LED 10 wattwith IP 65 protection complete all as specified and directed. 235 S& F in repairs and connect of solar LED street light fittings 20 watt with 40 AH battery bank, PV solar panel fitted on and incl 5 mtr steel pole with base plate incl foundation bolts, braket, clamps , nuts etc complete all as specified and directed. Note- Necesssary excavation/earth work , PCC/RCC work will be measuered and paid under relevant item of schedule. 236 Taking down unsv street light loop-in and loop out box by disconnecting electrical connection and removing existing clamps, nuts, bolts, and washers and supply, fix and connect, factory made out door type syntex street light loop-in and loop out box comprising with suitable size of bus bar, insulators, connectors etc and with one C curve 6 Amp MCB SP, one PVC way connector etc. incl suitable size clamps, nuts, bolts & washers complete all as specified and directed. 237 S&F 3 core , strandedcopper conductor cable 1.5 sqmm, PVC insulated and PVC sheathed , 1100 Volts grade for making connections from junction box tostreet light fittings including PVC conduit of size 20mm dia including necessary clampscomplete all as specified and directed. 238 S/F and connect, factory made duly painted metallic weather proof enclosure street light panel timer unit outdoor type having one 40 Amps C curve MCB TPN, three phase 415 V 32 Amps power contactor, Automatic operation street light timing switch having lighting control (ON-OFF) through Astronomical Calculation of Sun rise / sun set by setting date, time and degree of longitude and latitude without separate light sensors etc. including necessary fixing arrangements, suitable size clamps, nuts, bolts & washers complete all as specified and directed.
Contract Date: Jan 29, 2026 Contract Value : ₹ 33.87 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Uttar Pradesh View Result →
46.
Defence #8739180 Technical Bid
Term Contract For Purchase Of Sanitation And Hardware Items - 1 Sutli- Jute 2 Steel Wheel Barrow With Two Wheels, 140 Ltr Capacity, Wheel Material, C.I With Cushioned Rubberized Tyre, Type Of Bearing / Bush: Double Ball Bearing N Nnote:- The Wheel Barrows Will Be Painted With Nilgiri Blue Colour With Writing “D.C.B” On Both Side N 3 Steel Hand Cart Trolley With Two Wheels 350 Ltr Capacity, Wheel Material, C.I With Cushioned Rubberized Tyre, Type Of Bearing / Bush: Double Ball Bearing N Nnote:- The Hand Cart Trolley Will Be Painted With Nilgiri Blue Colour With Writing “D.C.B” On Both Side N 4 Earthen Flower Pots Well Eked 8” Size ( As Per Sample ) 5 Earthen Flower Pots Well Eked 10” Size ( As Per Sample ) 6 Earthen Pots Well Eked 12” Size ( As Per Sample ) 7 Earthen Pots Well Eked 10” Size ( As Per Sample ) 8 Earthen Flower Pots Well Eked 12” Size ( As Per Sample ) 9 R C C Pots 10” Massaica ( As Per Sample ) 10 R C C Pots 12” Massaica ( As Per Sample ) 11 R C C Pots 14” Massaica ( As Per Sample ) 12 R C C Pots 16” Massaica ( As Per Sample ) ) 13 Pvc Water Storage Tank-500 Litr Capacity, Code-Ccws-50.02, Diameter ( Inch ) -35.8, Length ( Inch ) -37.7, Manhole Dia. ( Inch ) -15.7– Sintex 14 Pvc Water Storage Tank – 1000 Litr, Capacity, Code-Ccws-100.01, Diameter ( Inch ) -43.3, Length ( Inch ) -48.2, Manhole Dia. ( Inch ) -15.7– Sintex – Sintex 15 Pvc Net Hose Pipe Double Braided 40Mm Superior Quality ( As Per Sample ) 16 Rubber Hose Pipe 25Mm Double Braided- Double Ply Of 10 Kg Pressure ( As Per Sample ) 17 Rubber Hose Pipe 20Mm Double Braided- Double Ply Of 10 Pressure ( As Per Sample ) 18 Rubber Hose Pipe 40Mm Double Braided- Double Ply Of 10 Kg Pressure ( As Per Sample ) 19 Lock Big 40 / 47Mm With 3 Keys Of Reputed Brand ( Harrison / Plaza Etc ) . 20 Scissor Big With 10” Blade 21 Sealing Wax In 6” – 8” Long Sticks In Pkt Of 500Gms Of Reputed Brand 22 Notice Board With Aluminum Beading And With Installation Size 4’X3’ 23 Notice Board Size 3’X2’ 24 Lock Big 60 / 65Mm With 3 Keys Of Reputed Brand ( Harrison / Plaza Etc ) . 25 Painting Brush 50Mm, Long Type White Hairs ( Asian ) 26 Painting Brush 75Mm Long Type White Hairs ( Asian ) 27 Painting Brush 100Mm Long Type White Hairs ( Asian ) 28 Turpentine Oil In 5 Lits Tin Superior Quality 29 Black Board Paint In 1 Lits Tin 30 Metallic Tape - 15 Mts Cosmos / Freemans 31 Pvc Pipe ½” Size, 30Mtr Roll ( 04 Kgs Weight ) 32 Pvc Pipe 3 / 4” , Double Braided, Heavy Duty, 30Mtr Roll 33 Pvc Pipe 1” Double Braided, Heavy Duty, 30 Mtr Roll 34 Ply Wood 6Mm - Isi 35 Ply Wood 8Mm - Isi 36 Ply Wood 12Mm - Isi 37 Torch Of 3 Cells Brass- Geep Quality With Cells 38 Brasso 500 Ml 39 Hacksaw Blades 12” X ½ “ 40 Hacksaw Frame – Isi 41 Tarpaulin Cover Of Size 16’ X 18’ Of Good Quality ( As Per Sample ) 42 Ply Board 18Mm – Isi 43 Bucket Plastic With Handle To Carry, Capacity Of 20 Ltrs, Made From Fresh Plastic Of Reputed Brand Cello Etc 44 Plastic Mug 45 Duster White Colour Size 600Mmx600mm Made Form Cotton Of Reputed Brand / Manufacturing Unit 46 Distilled Water In 1Lit Bottle Make-Milton 47 Glass Tumbler Plane In Transparent Colour Of Reputed Brand Name With Printed Of Board Name & Logo 48 Glass Tumbler Officers With Self Designing ( Borosil Glass ) Single Transparent Colour Of Reputed Brand 49 Poucha Big Size Made Of Soot Size 32”X 32” ( Weight 300Gm Each Poucha ) 50 Toilet Cleaning Brush Make Gala / Brw 51 Naphthalene Balls Per Pkt Of 400Gm / 500Gm Of Reputed Brand Name 52 Washing Powder 1 Kg Pack Good Branded Name Surf / Nirma / Wheel Etc 53 Utensil Cleaner / Dish Wash Powder 1Kg Good Branded Name 54 Dustbin Without Lid-Medium Size Of Repute Brand Wonser / Cello Etc 55 Coir Foot Mat Size 3’X1.5’ Of Reputed Brand 56 Coir Foot Mat Size 3’X2’ Of Reputed Brand 57 Lifebuoy Soap 125 Gm 58 Rin Soap 125 Gm 59 Mustered Oil In 1 Lit Bottle – Agmark Quality – Hafed / Nafed 60 Brooms ( Hard ) Made Of Bamboo Strips Thin Quality Of Weight About 1½ Kg, With Gulli And Ring As Per Sample 61 Brooms ( Phool ) 400 Gm With Polythene Cover As Per Sample 62 Lime Powder ( Chuna ) In Bags Of 50 Kg ( As Per Sample ) 63 Arocem Cement Paint-Isi N ( Terracotta No.1110-A ) In 5Kgs N 64 Arocem Cement Paint-Isi N ( Terracotta No.1110-A ) In 25Kgs N 65 Liquid Car Polish Waxpol Of 200Ml Tin ( As Per Sample ) , Per Bottle Of 200Ml 66 Sulphuric Acid In 5 Litr Tin 67 Leatherette Bag As Per Sample 68 Water Jug Colour, Elegant Look, 2 Ltr Capacity, Made From Fresh Plastic Of Reputed Brand Cello / Bright With Printed Of Board Name & Logo 69 Torch Cell Nippo Leak Proof Full Size 70 Colin, Liquid Cleaner / Glass & Household Cleaner With Spray, Bottle Of 500Ml, Of Reputed Brand Colin 71 Gola School Shoe ( Black With Velcro ) Upper Pvc Of Upper Grade, 1 Eva Sole, Size-9 ( Small ) 72 Gola School Shoe ( Black With Velcro ) Upper Pvc Of Upper Grade, 1 Eva Sole, Size-10 ( Small ) 73 Gola School Shoe ( Black With Velcro ) Upper Pvc Of Upper Grade, 1 Eva Sole, Size-11 ( Small ) 74 Gola School Shoe ( Black With Velcro ) Upper Pvc Of Upper Grade, 1 Eva Sole, Size-12 ( Small ) 75 Gola School Shoe ( Black With Velcro ) Upper Pvc Of Upper Grade, 1 Eva Sole, Size-13 ( Small ) 76 Gola School Shoe ( Black With Velcro ) Upper Pvc Of Upper Grade, 1 Eva Sole, Size-1 77 Gola School Shoe ( Black With Velcro ) Upper Pvc Of Upper Grade, 1 Eva Sole, Size-2 78 Gola School Shoe ( Black With Velcro ) Upper Pvc Of Upper Grade, 1 Eva Sole, Size-3 79 Gola School Shoe ( Black With Velcro ) Upper Pvc Of Upper Grade, 1 Eva Sole, Size-4 80 Gola School Shoe ( Black With Velcro ) Upper Pvc Of Upper Grade, 1 Eva Sole, Size-5 81 Gola School Shoe ( Black With Velcro ) Upper Pvc Of Upper Grade, 1 Eva Sole, Size-6 82 Gola School Shoe ( Black With Velcro ) Upper Pvc Of Upper Grade, 1 Eva Sole, Size-7 83 Gola School Shoe ( Black With Velcro ) Upper Pvc Of Upper Grade, 1 Eva Sole, Size-8 84 Gola School Shoe ( Black With Velcro ) Upper Pvc Of Upper Grade, 1 Eva Sole, Size-9 ( Big ) 85 Gola School Shoe ( Black With Velcro ) Upper Pvc Of Upper Grade, 1 Eva Sole, Size-10 ( Big ) 86 Gola School Shoe ( Black With Velcro ) Upper Pvc Of Upper Grade, 1 Eva Sole, Size-11 ( Big ) 87 Gum Boot Full Size Duck Back Of Sizes 8” 9” 10” 88 Cold Water Jug With Tap 20 Litr Capacity – Mayur / Milton 89 Cold Water Jug With Tap 10 Litr Capacity – Mayur / Milton 90 Cold Water Jug With Tap 5 Litr Capacity – Mayur / Milton 91 Milton Water Bottle Steel Body 1 ½ Lit Capacity 92 Flask 1 Litr Capacity - Cello / Milton 93 Cup Plate Bone China With Single Golden Lining - Bharat, Per Set Of 06 Cup & 06 Plate 94 Glass Borosil 350Ml Medium Size, Per Set Of 06 Glass 95 Paint Syn Enamel – Asian / Berger ( 4 Lits Packing ) Ncolor - White 96 Paint Syn Enamel – Asian / Berger ( 4 Lits Packing ) Ncolor - Yellow 97 Paint Syn Enamel – Asian / Berger ( 4 Lits Packing ) Ncolor - Black 98 Paint Syn Enamel – Asian / Berger ( 4 Lits Packing ) Ncolor - Red N 99 Paint Syn Enamel – Asian / Berger ( 4 Lits Packing ) Ncolor - Green N 100 White Phenyl – Clinzo In Tin Of 5 Litr 101 Black Phenyl – Gainda In 5 Lit Packing 102 Black Phenyl – Bengal Chemicals In 5 Lit Packing 103 Fevicol In 1 Kg Tin 104 Hard Bamboo ( Lathi ) 5’ Long 1 ½” Dia 105 Broom Tilli ( 500Gm Weight ) 106 Foot Operated Dust Bin 16 Lit Capacity 107 Bio-Medical Waste Dustbin, Ms Frame, Foot Operated – 15 Lit Capacity ( Colors Red, Blue, Black, Yellow & Green ) - Polywell Make. Printed With Bio Hazard Symbol 108 Bio-Medical Waste Dustbin, Ms Frame, Foot Operated – 25 Lit Capacity ( Colors Red, Blue, Black, Yellow & Green ) Polywell Make. Printed With Bio Hazard Symbol 109 Door Closer – Heavy Duty - Harrison 110 Towel White / Colored Size 75X150cms Made From 100% Cotton Of Reputed Brand Name Bombay Dyeing ( Plain Color / White ) 111 Hand Towel White / Colored Size 40Cmx60cm Of Reputed Brand Made From 100% Cotton Bombay Dyeing ( Plain Color / White ) 112 Towel White / Colored Size 60X120cms Made From 100% Cotton Of Reputed Brand Name Bombay Dyeing ( Plain Color / White ) 113 Baygon Spray, Household Insecticide- De For Flying & Crawling Insects. Tin Of 500Ml Of Reputed Brand Name Bygone / Bayer Etc 114 Khurpa Size 9” Long And 4” Width 3Mm Thick With 6” Wooden Handle With Rod Revetted On Back 115 Showels Superior Quality With Wooden Handle As Per Sample 116 Sword Like ( Talwar ) Duly Sharpened Iron Handle Revetted In 3 Places. Iron Patti 3’ Long And 1 ½” Width 4Mm Thick 117 Drain Cleaner ( Kaulchie ) With 5’ Long Bamboo Handle As Per Sample. ( As Per Sample ) 118 Water Sprinkler 10 Lits Capacity –Made Of 24 Guage G I Sheet 119 Kantas With Handle ( Digging Fork ) Of 4 Teeths ( As Per Sample ) 120 Spades With Handle ( As Per Sample ) 121 Genti With Handle ( As Per Sample ) 122 G I Bucket Of 15 Lits Capacity 24 Gauge Gi Sheet 123 Iron Pan ( Tasla ) ( As Per Sample ) 124 Floor Cleaner Germi Side ( Germ Guard ) 125 Urinal Stic – Odonil In 100Gm Packing 126 Nepthline Ball - Bangal Chemicals / Trishul 100 Gm 127 Wiper Big 5’Rod X 24” Blade – Complete Set 128 Hand Mop Size 38”X 38” 129 Wet Mop 5’ Height With Clamp And Refill ( Complete ) 130 Dry Mop 5”Height 24” Frame With Mop ( Cotton ) – Complete 131 Liquid Hand Soap In 5 Lit Tin 132 Liquid Soap 250Ml Dettol / Lifebuoy With Pump 133 Room Freshener In Tin Can Of 300Ml, Having Good Fragrances Of Reputed Brand Premium 134 Glass Cleaner 1Ltr With Anty Locking Spray Gun 135 Hit – 500Ml 136 Repellant With Refill 137 Repellant Refill 138 Nylon Scrubbing Brush Size 5X24 With Wooden Handle 139 Harpic – 500 Ml 140 Lizol – 500 Ml 141 Scrubber With Sponge ( Big Size ) – 3M 142 Odonil – 75 Gm 143 Quarter Plate – Luminarc / Corels 144 Half Plate – Luminarc / Corels 145 Full Plate – Luminarc / Corels 146 Electric Kettle Steel Body – 01 Ltr Capacity 147 Tea Kettle Electric 1.5 Ltrs Capacity Having 15 Amp Plug With Lid And Wiring Lead Of Reputed Isi Brand 148 Electric Bell / Musical Door Chime Having Pleasant Melody Sound Of Ding Dong Of Reputed Brand 149 Table Bell Of Reputed Brand 150 Remote / Cordless Bell Of Branded Name 151 Service Tray Plastic-Big Size Of Reputed Brand Cello Etc 152 Door Mat ( Jute / Rubber ) Size 2’ X 3’ 153 Door Mat ( Jute / Rubber ) Size 2’ X 4’ With Printing 154 Stainless Steel Jug 1 ½ Lit Capacity With Lid 155 Thymol 156 Santobrite 157 Corboxy Methyl 158 Methyl Perathion 159 Silica Gel 160 Kerosene Liquid 161 Stainless Steel Jug 1 ½ Lit Capacity With Lid 162 Thymol 163 Santobrite 164 Corboxy Methyl 165 Methyl Perathion 166 Silica Gel 167 Kerosene Liquid 168 Solution For Stain ( Spot Remover ) 169 Amonia Liquid 170 Glycerine 171 Sodium Sulphite 172 Mixture Of Tartaric 173 Ethylcohol 174 Benzene 175 Ether 176 Oxalic Acid 177 Vacuum Cleaner ( Eureka Forbes ) N1000w Power Plus Motor N 178 Calcium Hydroxide Solution 179 Calcium Bicarbonate Solution 180 Barium Hydroxide 181 Magnesium Meth Oxide 182 Bathing Stools Nmaterial: Plastic, Colour: White Npackage Contents: 1 Strong Stool Nsize: 29 Cm X 29 Cm X 14.5 Cm Nattractive Colours, Easy To Carry And Use Niso Certified Organization N 183 Bathing Mugs Nmade Of Food Grade Plastic Nunique Square Shape Nspecial Grip On Handle Nmake - Nayasa Nspecific Uses: Household Application N 184 Leaves Collector Machine Nmaterial: Plastic, Colour: Green Nitem Dimension: 118.11 Cm X 58.41Cm X 73.66 Cm Npackage Contents: 1-Piece Garden Cleaner Tool Nmanual Lawn Sweeper With Multi Functional Super Grabbing Brushes For Collecting Leaves And Grass Neasy Height Adjustments Nwork Width - 21 Inch N 185 Spray Pump Nmaterial: Plastic, Colour: Red And White Ndimension ( L X W X H ) : 40 Cm X 20 Cm X 50 Cm Npackage Contents: 1 Spray Pump Ncare Instructions: Wash With Water After Use N 186 Urinal Green Mats Nreminds You When To Change It - Simply Pull Off The Date Tabs To Set Your Replacement Date Nreduces Labour Over 50% Nbetter Fit For More Urinals Nprotects The Drain - Unique Dome Design Eliminates Floating And Movement In Urinal Nprovides A Burst Of Fragrance Collected In The Headspace With Every Use N 187 Floor Polisher Machine Ncompact Shine Nmost Reliable Multipurpose Floor Care Machine Nwith A Range Of Applications For Your Floor Care Needs. Scrub Or Polish. Shine Does It All N 188 Floor Polisher Brush Nglass Boss Buffer Buff, Polish And Protect Hardwood, Vinyl, Tile, Laminate And Concrete Floors Keeping Then Sparkle Clean. Unlike Many Commercial Grade Buffers, This One Lightweight ( 7 Lbs. ) Easy. N 189 Bamboo Pole N15ft Long Bamboo N 190 Grass Cutter Machine Ndrive System-Auto Centrifugal Clutch, Spiral Bevel Gear Nreduction Ratio-14 : 19 Napplicable Engines Petrol-Tb50 Nmodel-Hk-B50 Ndisplacement ( Cm3 ) -50.0 Nmax. Output Kw / Hp-1.8 / 2.4 Nweight ( Kg ) - 9.2 Nfuel Tank Capacity ( Litre ) -0.9 Nfuel-Petrol Nfuel Mixture ( Petrol : 2 Cycle Engine Oil ) – 25 : 1 ( 2T 40Ml / Liter ) N 191 Instant Road Repair Solution Of N Roadlay / Shellmac / Or Equivalent Nwhich Can Be Used In All Weather Conditions And It Is An Instant Road Repair Premix For Permanent Repair Of Potholes, Cracks, And Depressions On The Roads. It Is Ideally Designed To Withstand Extreme Temperatures And Heavy Traffic Conditions. Roadlay / Shellmac Cold Mixture Consists Of Nominal Aggregate Size Of 9.5Mm Down Size. Roadlay / Shellmac Incorporatates Specially Additives That Impart Unique Performance Properties To The Mixture. Instant Road Repair Features Of Roadlay / Shellmac: Ready For Immediate Use With Pre-Mixed Aggregates ( Cold Technology ) ., No Heating Or Mixing Or Additions To The Product Before Or After Application. Requires Simple Equipment Such As Hand Brushes, Shovel And A Rammer. The Use Of A Roller Is Not Necessary. No Pre Treatment Of Repair Areas Is Required I.E. Cutting Out, Use Of Tack Coat. Instant Repair Of Road Can Be Made In Monsoons And Wet Conditions, Extremes Of Heat ( 60C+ ) And Cold Conditions. Size-25Kg Bag N 192 Table Spoons Nmade From 100% Food Grade Stainless Steel Which Prevents Rusting N1.5Mm Thick Stem To Ensure Durability Nsmooth Edges For Safety Neasy To Clean & Elegant Design 193 Tea Spoons Nmade From 100% Food Grade Stainless Steel Which Prevents Rusting N1.5Mm Thick Stem To Ensure Durability Nsmooth Edges For Safety Neasy To Clean & Elegant Design 194 Dessert Spoons Nmade From 100% Food Grade Stainless Steel Which Prevents Rusting N1.5Mm Thick Stem To Ensure Durability Nsmooth Edges For Safety Neasy To Clean & Elegant Design 195 Vehicle Mounted Vacuum Leaf Collector Nspecification: Nengine – Mitsubishi 240 Cc Ndimension : 1000*630*1450Mm Nweight : 145 Kg Ninlet Hose: Transparent Pu Hose With Steel Support Ninlet Hose Length : 3500Mm Ninlet Hose: Diameter 220Mm Noutput Type: Vertical Nchute Height: 1500Mm Nchute Angle: 250 Degrees Ncf: 2800 Cfm Nframe : Frame: Hang Kit For Tailgate Battery For Electric Start: 12V 20 Ah Nemergency Safety Switch: Yes N 196 Push Type Vacuum Leaf Collector Nspecification: Nmodel: Npt-240 / 1 Nworking Width : 80Cm Ncollection Bag: 240L Ndive Speed :0.85M / S N ( Single Speed ) Nrated Power: 3.6Kw / 3600 Min-1 Nengine Fuel Capacity:3.6 L Nengine Oil Capacity:0.6 L Nmax Operating Slope:8.50 Ndimension: 1.57X0.87X1.0M Ntotal Unit Empty Weight: 83 Kgs N 197 Push Type Vacuum Leaf Collector Nspecification: Nmodel: Npt-240 / 3 Nworking Width :80 Cm Ncollection Bag: 240L Ndive Speed :0.75-86.1.1M / S N ( Three Speed ) Nrated Power:3.6Kw / 3600 Min-1 Nengine Fuel Capacity:3.6L Nengine Oil Capacity:0.6 L Nmax Operating Slope: 8.50 Ndimension: 1.57X0.87X1.0M Ntotal Unit Empty Weight: 82.5 Kgs N 198 Top Tree Pruner Telescopic Atp1840+330 Nhandle-Telescopic Light Aluminum Handle Weight 430 Gms Length 1.84M- 2 Section, Round Shape, Type-High Branch Pruner For Large Size High Branches Round Aluminum Tube With Non Slip Pvc Grip, Pull-Saw, Blade-Blade 330 Mm Length, Taper Ground, Razor Sharp With Sheeth Cover Safety N 199 Pruning Saw 210Mm Folding Auto Lock Nhandle – Ergonomic Handle Covered With Rubber Cushion, Comfortable Grip, Handle Grip Designed To Fit Hand Perfectly, Type-Folding Curved Blade With Auto Lock Mechanism, Blade-Blade 210 Mm Length, Triple Bevel Teeth Chrome Plated Electronically Impulse Hardened Teeth. Razor Sharp Teeth, Tooth Pitch-4Mm, Lock System-Auto Lock To Securely Hold Blade In The Open And Closed Position. N 200 Pruning Sharpener Dfh Nhandle-Special Moulded Plastic Grip Handle Ntype-Rhombus Shape Sharpener Can Touch-Up Impulse Hardened Saw Teeth Blade- Blade 70Mm, Special Grade Diamond Sharpener, Also Sharpen Other Range Of Tools. N 201 Lopper / Big Shear Telescopic For Pruning & Cutting Nlength- 68 Cm To 102 Cm, Type- Rachet By-Pass Lopping Shear, Cutting Blade- 3-3 / 4” X 5Mm Carbon Steel Non Stick Teflon Coated Upper Blade, High Carbon Sk-5 Steel, Handle-Special Grade Aluminium With Telescopic Height Adjustment, Grip-Comfortable, Lock Nut Arrangement. N 202 Long Reach Telescopic Tree Pruner Fibre Handle Nhandle-Telescopic Light Weight Comfort Fibre Handle, Type-Tubular One-Way Telescopic Handle 120” Inch With Safety Lock System, Blade-21” L High Branch Pull- Saw Nylon Safety Lock System With Black Protector Blade Thickness: 1.5Mm, Triple-Bevel Teeth With Chrome Plated For Round Fibreglass Pole, Height Adjustment Lock System N 203 Hedge Shear Telescopic Nhandle-Telescopic Aluminum Handle, Type-Square Aluminum Tube With Non Slip Pp+ Tpr Grip, Straight Bblade With Adjustable Knob, Upper Blade-4Mmx9” S50c Carbon Steel, No. Stick Teflon Coated Blade, Lower Blade-4Mmx9” Hard Chrome Plated, Bolt & Lock Nut Arrangement N 204 Folding Curved Blade Saw Auto Lock ( Ac-210- Lh ) Nspecification Nblade Length : 210 Mm Ntooth Pitch : 4Mm Nhandle Length : 250 Mm Nweight: 240 Grams N 205 Horticulture Cordless Hedge / Shrub Shear Ntype-Cordless Hedge / Shrub Trimmer Npower:-7.2V / 2.2 Ah, Cutting Blade Length-160 Mm Cutting Gap-7-8 Mm Handle-Comfortable Soft Grip, Cutting Width Grass Shear:75Mm Nlight Weight, Handy & Powerfull, Run Time Hedge / Shrub. 160 Min, ( Aprox. ) Ncharging Time:-3-5 Hrs Nweight:606 / 650 Gms N 206 Katiya Cutting Nmaterial-Mild Steel Nsize-10Inch Ninsulation Of Handle N 207 Compo Branch, Fresh Leaves & Wood Chipper Shredder Nuse In The Field Of Tree Maintenance. Fresh Leaves / Green Wood With Diameter Upto 10 Cm Is Pulled Inside & Shredded To Fine Wood Chips. The Shredded Material Is Ideal For Use As Compost And Mulch, Raw Material, Animal Feed Or Fuel, Wood Chips Are Highly Ejected And Go Directly In A Trailer Or Wheel Barrow Through The Defector. N2 Standard Output Chutes Low Configuration For Leaves & High Configuration For Wood Chips. Ntype-Compo Wood Chipper & Shredder Ndrive Motor- Petrol Engine Npower Kw / Hp / Displacement- 15 Hp Nstarter-Electric Nmax Diameter Of Branches Fresh Leaves & Chops Shedding-Fresh Cut Wood 8-10 Cm, Dry Wood-Max Diameter 7-8 Cm Fresh Leaves & Chops Shredding As Per Grid Size Provided With Machine Ninput Height- 1 Meter Ninput Dimension-34X42 Cm Noutput Height-140 Cm Noutput Chute-2 Standard Output Chutes Low Configuration For Leaves Turnable Chute-High Configuration For Branches. Nemergency Stop-Provided Nfuel Tank Capacity-6-7 Ltr Unleaded 95 Nblades-2 Pro Blades, 1 Counter Blade Nwood Chipper Lxwxh-150X75x152 Cm Nwheels-390X125 Mm Nweight-175 Kg Ntool Bag With Safety Kit-1 Tool Bag+Goggels+Gloves+Rotor Tool ( 1Pc ) N 208 Fixed Dustbin Twin 100 Liters With Installation With M.S Frame Green And Blue Nmaterial-Lldpe Nbin Capacity ( Volume ) ( Ltrs ) -2 Nweight Of Dustbin ( Complete Unit ) ( Grams ) -9500 Ncolour-Other Than Green / Blue Ngripping Provision-Frontal Ndustbin Stand-With N 209 Wheeled Bin 240 Ltr Make Nilkamal N100% Virgin Plastic With Uv Protected From Sun Rays. Ncapacity 240 Liters Ncolor: Blue & Green Npackage Contains Set Of 2 Pcs, Heavy Duty Use. Neasily Move With Wheels Even With Full Of Garbage Ncompatible Material- Polypropylene Nexterior Finish-Glossy Nincluded Components-Top Lid Nitem Shape-Rectangle Nitem Weight-12 Kilograms N 210 Four Wheeled Bin, 1100 Ltr, Make-Neelkamal Nthe Galvanized Steel Garbage Containers For Waste Collection Shall Be Provided With 4 Castor Wheels With Blocking System. The Garbage Collection Bins Shall Be Of 1100 Ltrs. Capacity. These Shall Be Closed Type Hygienic Bins. The Lid Should Be Hinged At One End, Which Shall Open Freely White Unloading The Garbage Into The Shall Be Of Pressed Steel Sections For Ensuring Adequate Structural Strength Required For Handling With The Compactor Bin Lifter. Also, Bin Shall Be Designed To Be Light Weight And With Facility To Be Easily Handled By Two Bin Handlers. Nthe Bins Should Have Frp Coating Inimum 4Mm Thick Inside And Manufacture Certificate For Frp Coating. N 211 Sanitary Pad Vending Machine Nmounting Option-Wall Mounted, Floor Top, Table Top Ncapacity-25 Napkins Nautomation Grade-Manual Nnapkin Dimension ( Mm X Mm X Mm ) -165D / 630W / 300H Ncoin Selection-? 5 Ntype Of Napkins-Folded Nwarranty-1 Year Nweight-13 Kg N 212 Wheeled Bin Nmake-Neelkamal Ncapacity-120 Ltr N 213 Concrete Rcc Benches Nseating Capacity-3 Noverall Length-1500Mm Noverall Width-620 Noverall Height-1000 Nmaterial Of Main Frame-Mild Steel Nthickness Of Material Of Main Frame-100Mm Nmaterial Of Legs-Concrete Nmaterial Of Seat And Backrest-Mild Steel Nthickness Of Material Of Seat And Backrest-100Mmcovering Material For Seat And Backrest-Paint Coating Nall M S Strucure Finish-Enamel Paint Ncolour Of Paint-Any Nminimum Weight Of Public Place Seating Chair-125 Nstyle-Without Arms And With Backrest N 214 Helmet Nshelmet Safety Helmet Ratchet Type With Plastic Cradle Nisi N 215 Liquid Soap Dispenser N500ml Portable Suction Nsingle Wall Mounted N 216 Pedestal Dustbin Nweight-200 Grams Ncapacity-15 Liters Nproduct Dimensions-12X12x28 Cm N ( As Per Sample Available In Dcb ) N 217 Sanitary Pad Destroyer Machine ( As Per Sample Available In Dcb ) Ncapacity-100 Person, 70 Napkins Approx Nburning Per Day-70 Napkin Approx Nper Time Storage-5 Napkins Approx Ndimension In Mm-270X250x370 Nconstruction- Ms Powder Coated Nheater Watts-1000 Watts Nmode-100% Automatic Noperation-Micro Processor Ncolor-Blue / Red N 218 Gloves Rubber Nbig Size Reusable Gloves Made Of 100% Natural Latex. N 219 Plastic Plant Pot 12” Nmaterial: Plastic Container Ncolor: Black, Green, Yellow, Red, Brown Nsize: 12 Inch Height, 12 Inch Dia, Heavy Duty Plastic Planter Pots With Bottom Tray 220 Plastic Plant Pot 10” Nmaterial: Plastic Container Ncolor: Black, Green, Yellow, Red, Brown Nsize: 10 Inch Height, 10 Inch Dia, Heavy Duty Plastic Planter Pots With Bottom Tray N 221 Brooms ( Hard ) Made Of Bamboo Strips Thin Quality Of Weight About 1½ Kg, With Gulli And Ring As Per Sample 222 Hard Bamboo ( Lathi ) 5’ Long 1 ½” Dia 223 Brooms ( Phool ) 400 Gm With Polythene Cover As Per Sample 224 Sword Like ( Talwar ) Duly Sharpened Iron Handle Revetted In 3 Places. Iron Patti 3’ Long And 1 ½” Width 4Mm Thick 225 Spades With Handle ( As Per Sample ) 226 Handle For Spades ( As Per Sample ) 227 Pick Axe ( As Per Sample ) 228 Pick Handle ( As Per Sample ) 229 Axe ( As Per Sample ) 230 Axe Handle ( As Per Sample ) 231 Hansia / Dah ( As Per Sample ) 232 Darati ( As Per Sample ) 233 Drain Cleaner ( Kaulchie ) With 5’ Long Bamboo Handle As Per Sample. ( As Per Sample ) 234 Kolchi Handle 5’ ( As Per Sample ) 235 Kantas With Handle ( Digging Fork ) Of 4 Teeths ( As Per Sample ) 236 Khurpa Size 9” Long And 4” Width 3Mm Thick With 6” Wooden Handle With Rod Revetted On Back 237 G I Bucket Of 15 Lits Capacity 24 Gauge Gi Sheet 238 Bucket Plastic With Handle To Carry, Capacity Of 20 Ltrs, Made From Fresh Plastic Of Reputed Brand Cello Etc 239 Gunny Bags ( As Per Sample ) 240 Gum Boot Full Size Duck Back Of Sizes 8” 9” 10” 241 Gloves Rubber ( As Per Sample ) 242 Mask Surgical ( As Per Sample ) 243 Hand Mop Size 38”X 38” 244 Dry Mop 5”Height 24” Frame With Mop ( Cotton ) – Complete 245 Duster White Colour Size 600Mmx600mm Made Form Cotton Of Reputed Brand / Manufacturing Unit 246 Harpic – 500 Ml 247 White Phenyl – Clinzo In Tin Of 5 Litr 248 Black Phenyl – Bengal Chemicals In 5 Lit Packing 249 Naphthalene Balls Per Pkt Of 400Gm / 500Gm Of Reputed Brand Name 250 Sulphuric Acid In 5 Litr Tin 251 Urinal Stic – Odonil In 100Gm Packing 252 Lizol – 500 Ml 253 Liquid Hand Soap Dettol In 1.5 Lit 254 Lime Powder ( Chuna ) In Bags Of 50 Kg ( As Per Sample ) 255 Washing Powder 1 Kg Pack Good Branded Name Surf / Nirma / Wheel Etc 256 Toilet Cleaning Brush Make Gala / Brw 257 Steel Wheel Barrow With Two Wheels, 140 Ltr Capacity, Wheel Material, C.I With Cushioned Rubberized Tyre, Type Of Bearing / Bush: Double Ball Bearing N Nnote:- The Wheel Barrows Will Be Painted With Nilgiri Blue Colour With Writing “D.C.B” On Both Side N 258 Poucha Big Size Made Of Soot Size 32”X 32” ( Weight 300Gm Each Poucha ) 259 Broom Tilli ( 500Gm Weight ) 260 Showels Superior Quality With Wooden Handle As Per Sample 261 Supply Fixing, Installation Of Solar Stud Waterproof, Energy-Saving And Eco-Friendly Solar Road Stud Made Out Of Solid Aluminum-Alloy Shell Powered By Solar Cell And Panels. Ideal Signal Product For Highways, Parking Lots, Roads And Similar Isolated Or Stand-Alone Traffic Application: Technical Specification:1. Aluminum-Alloy Sheel, 2. Solar Panel Monocrystalline Solar 2.4 V / 0.3 Watt., 3. One Ni-Mh Or Ni-Cd Rechargeable Battery., 4. Six Super Bright Leds With 10000 To 18000 Mcd ( Millicandela ) . 5 Color: Yellow, Red, Blue, Green And White. 6 Working Time 50 To 60 Hours Successively After The Battery Is Fully Charged. 7. Charging Time: Five To Six Hours / Day. 9. Brightness Sensitive Autoswitch, Automatically Turns On At Night And Turns Of At Down. 10. High Visiblity Leds For Safe Night Driving. 11. Size 125X12525mm With Shank Of 65Mm. The Electronic Circuit Should Be Encapsulated With The Battery In The Shank Of The Solar Stud Shall Have A Non-Inveasive Switch To Avoid Battery Drainage During Storage And Transportation. The Product Should Be 100% Waterproof Confirming To Ip 67. 13. Bearable Weight-10 Tons Approx. 14. Working Temperature-100 ~ 750 C Makes: Dark Eye, Safe Zone, Avery Dennison, Kohinoor
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Delhi View Result →
47.
Communications and Information Technology  #8730859 Technical Bid
Supply Of It Equipments , Systems Softwares , Annual Maintenance Of It Equipments And Other It Related Services-1 Desktop Computers 2 Laser / Inkjet / Dmp Printer 4 Ups 5 Laptop Computers 6 Managed Switch D-Link 7 Hp Web Server Ml-150 8 Hp Desinejet-T520 ( Plotter ) 9 Hp M 706 N / Hp M7612 N 10 All In One Pc 11 Hp Workstation Z230 12 Hp Moniter Z231 13 Hp Proliant Dl180gen9 I Server Rack Based: Ibm Power System S822, Sr. No-84A08fw, 84A090w Ii San Storage : Ibm San - V5030, Srno-781H387 Iii Tape Library : Ibm Ts3100 Tape Library Express, Sr.No.-78Bv263 Iv San Switch : Ibm San24b-5, Sr.No.-10520Rp, 10520Re V Load Balancer ( Radware / F5 ) , Sr.No-41601009, 41601028 B Bill Of Material For Dr I Server Specification Rack Based: Ibm Power System S822, Srno-84A08ew Ii San Storage : Ibm San - V5030, Sr.No-781H398 Iii Tape Library : Ibm Ts3100 Tape Library Express, Sr.No-78Bv265 C Old Setup 1 Blade Chasis : Ibm Flex Enterprise Chasis-Srno. No- 06Zpkz3 I Ibm Flex Chassis 10U Rack Mounted Chassis To House At Least 14 Compute Nodes Of Half Height Or Half 7 Wide. Chassis Configured Should Not Only Support Current Generation Of Processors But Should Support Future Processor Technology Up To 5 Years Or More. 2 Rack I Industry Standard 42U Floor Standing Rack With Required Accessories Including Rack Mount 1U Tft Display With Embedded Keyboard And Touch Pad. Shall Include The Connectivity With The Offered Blade Chassis. 3 Blade Server, Sr. No- 06Aetwp, 06Aetwr I Ibm X240- 2 * Xeon 6C E5-2620V2 80W 2.1Ghz 4 Switch, Sr. No-Dni203600ke, Dni203600l2, Dni203600jp, Dni203600mm I 24 Port Unmanaged 1 Gbps ( Cisco Sg9524-As ) Networking Active Components 1 24 Port Managed Poe Gigabit Switch 2 Indoor Poe 3X3 Memo 802.11 Access Point Passive Components 3 Utp Cat6 24 Port Patch Panel 4 Utp Cat6 Information Outlet With Surface Mount Box With Shutter   5 Utp Cat6 Cable ( Box Of 305 Meters ) 6 Utp Cat6 Patch Cord ( 1 Metre ) 7 Utp Cat6 Patch Cord ( 2 Metre ) 8 27U Rack With 1000 Mm Depth For Server With All Accessories 9 Supply Of 1” Pvc Pipes / Conduits  Including Required Gully, Screw ( Per Meter ) Jobwork 10 Laying Of Pvc Pipes / Conduits  ( Per Meter ) 11 Laying Of Cat‐6 Cable In Pvc Pipes / Conduits  ( Per Meter ) 12 I / O Fixing &Termination   13 Jack Panel Termination   14 Rack Fixing And Dressing Including Fixing Of  Server , Switch , Panels, Cable  Laying And Ferruling Etc. 15 Total Schedule E ( 1 To 14 ) F Schedule F : Rajya Swasthya Evum Pariwar Kalyan Sansthan 1 Airtel / Equivalent Lease Line 20 Mbps For 1 Year@Annual Recuring 2 Airtel / Equivalent Lease Line 4 Mbps For 1 Year@Anual Recuring Charges / Location 3 One Resident Engineer At Central Command 4 Total 10 Technical Operators At Each Remote Location 5 Total Schedule F ( 1 To 4 ) G Schedule G :Council Of Science And Technology Lucknow Amc For 1 Year 1 Hp Proliant Ml 330 2 Hp Proliant Ml 150 3 With I7 & 18.5 Tft 4 With 20 Tft Or Plus 5 Small Printer 6 Mfp & Network 7 Color Lj 8 Deskjet 9 Scanner 10 A.M.C Charges Of Lan 50 Nodes ( Including Wire And Switches- Switch 32 Port- Qty. 02, 16 Port- Qty. 01 Switch 08 Port- Qty.03 ) 1 Dts- Digital Teaching With Desktop Pc, Projrctor, Interactive Board, Green Board, Visulizer Including :- A *Cabinet: Wall Mounted Lockable Enclosure Made Of Crca Steel Sheet * Cpu: Core I3 * Ram: 4 Gb * Hradidisk: 1Tb * Ports: Hdmi X 1, Display Port X 2, Usb X 6, Lan X 1, Wi-Fi * Os: Windows 10 Pro * Central Controller: Available With System On / Off, Pc On / Off, Projector On / Off, Volume Control Keys, External Pc Input , Vga Input Etc. * Wireless Keyboard & Mouse ( 1 Qty. Each ) * Soundsystem At 100W Rms Amplifier And 50W X 2 Speakers Each Housed In An Array Green Board 78Inch B Projecter Short Throw Native Resolution: 1280X800 ( Wxga ) Brightness: 4200 Ansi Lumens Contrast Ratio : 22000:1 Imput: Vgax2, Audio-In, Rcax1, S-Video X1, Hdmix1 Output: Vga, Audio Out Accessories: Cable Management Hood, Vga Cable, Power Cable, Remote Control, Wall Mount Kit, User Manual C Interactive Board Diagonal Size: 76 Inches Board Surface: Ceramic Coated Scratch Resistant Surface With 100 Percent Erasability. Fully Erase The Marking Of Whiteboard Marker Pen On The Surface Using Ethanol. Touch Technology: Infrared, Finger And Stylus Touch Standard Accessories: Stylus, Usb Cable, Software And User Manual Cd, Wall Mount Kit D Visualiser Portable, Cmos Capture Size: Minimum A4 Native Rsolution: Full Hd Video Frame Rates: 30 Fps Zoom: 12X Optical, 8X Digital Light Source: White Led 2 Pad Chair * Cromed Plated Student Chair * Pp Arms * Pp Back * Folding Writing Tablet * Pipe Stand * Seat Fabric & Back Nettapestry 3 Furniture I Student Workstation * All Booths Are Made Up Of Wooden / Ply Partition. Booth Size 2.5’ X 2’ With All Necessary Wire Arrangement. The Booths Could Be In Configuration Of 2 Trainee Tables. Ii Student Chair * Nylon Base, * Low Back Chair With Spring Back * Gas Lift, With Arm Rest * Pu Molded Seat And Pp Back Cover * Fabric Tapestry In Blue / Black Color. Iii Conference Table Conference Table ( 10X3 ) * Customized 10 X 3 Feet Rectangle Shape Conference Table. * The Design Features Oblong Table Tops Which Are Supported By Either Pedestals Or Legs. * Good Quality Table With High Grade Furniture. * Size- 300 X 900 X 750 Mm * M.D.F. Board Iv Chairs For Conference Table Chairs For Conference Table * Nylon Base, * Medium Back Chair With Spring Back * Gas Lift, With Arm Rest * Pu Molded Seat And Pp Back Cover * Fabric Tapestry In Blue / Black Color. 4 Ups 7.5 Kva, 30Min Battery Backup * Microtek Online Ups * Rated Capacity 7.5 Kva * High Frequency Double Conversion Technology- Emi / Rfi Noise Filter * Advanced Battery Management * Different Output Voltage System *Short Circuit & Overload Protection * With 16 Batteries & Rack ( 12Volt Each, 42 Ah ) With 30 Minutes Backuptime 5 Desktop Pc I5 * 19.5 Inch Display * Core I5 , 8Th Gen, With Windows 10 Sl * 4 Gb Ram * 1 Tb Harddisk 6 Networking Items I 8 Port Poe Gigabit Switch With Optical Patch Card Sc-Lc 2 Mtr Ii Cat 6 Cable 305Mtr Iii 9 U Network Rack Iv Rj 45 Connector V Jack Panel 24 Port Vi Access Point Withpoe Gigabit Port Vii Laying For Cat 6 Cable Mtr Viii I / O Box Cat 6 Ix Patch Cord 1Mtr. 7 Cctv Camera I Hd Network Ip 4 Mega Pixcel Dome Indoor Camera Ii 8 Channels Network Video Recorder With 4 Tb Hdd V 32 Digital Led Tv 7 Furnishing I False Ceiling In Classrooms ( In Sqft ) Providing And Fixing False Ceiling At All Height 6 Mm Thick Square Edge Pvc Laminated Gypsum Tiles Of Size 600X600 M Made Of Gypsum Plastic Board And Frame Work Made Of Galvanized Steel Section. Ii Flooring ( In Sqft ) Providing And Laying Vetrified Floor Tiles Kajaria / I.S.I Brand In Different ( Thickness Specified By Manufacturer ) With Water Absorption Less Than 0.8% And Confirming To Is 15622 Of Approved Make In All Colors And Shade Laid On 20Mm Thick Cement Mortor 1:4 ( 1 Cement 4 Cooarse Sand ) Including Grouting The Joints With White Cement And Matching Pigments Etc Complete. ( Size Of Tiles 600X600mm ) Iii Wall Paint Plastic With Putti Pop ( In Sqft ) Iv Window Blinds ( Sq Ft-140 ) ( No Of Windows: 7 ) , Door Curtain ( Sq Ft- 126 ) , 4 Doors Vi Gysum Board Work For Covering Window 8 Aluminum Work A Aluminium Partitioning / Doors In Sqft B Fixing Of Glass In Alluminium Partition ( 2.5X1.5X1.5Mm With Glass 5 Mm ) In Sqft 9 Led Light 2 X 2 Led Light 2 X 2 - 22 / 25 Watt * 36 W Led Panel 2 X 2 *Input Voltage: Ac 90-300V, 50Hz * Lumens: 3000 * Extruded Aluminium Frame 10 Castte Ac 1.5 Ton *Stabliser 5Kva, *2 Star Rating, *Auto Restart, *Antidust Filter, *Auto Air Swing, * Auto Clean, *Turbo Cool Mode. 11 Wall Fan Power Full Motor & Arrow Dynamically Designed Plastic Blades Deliver Extra Air Thrust At 2000 Rpm 12 Electric Wiring For A.C, Led Light, Wall Fan & Ups With Switch Or Socket ( Modular ) , Mcb, 4Mm Wire For Ac, 2Mm For Others Point , Power Load And Computers 13 Installation And Commissioning 14 Grand Total H ( 1 To 13 ) I Schedule I :Pwd ( Ids Circle ) , U.P. Lucknow For Band Width 2 Mbps ( Mpls ) 1 Annual Recuring Charges 2 Vc Bridge+Managed Service ( Annually ) 3 Total Schedule I ( 1 To 2 ) J Schedule J : Mahila Kalyan Dept., U.P. 1 Edb Postgresql Standard Support License For One Year ( Latest Version ) 2 Tool ( Cerberus License For Sftp ( For Pfms Integration ) For One Year 3 Installation And Commissioning 4 Total Schedule J ( 1 To 3 ) K Schedule K :Ram Lubhai Sahni Governement Women Pg College, Pilibhit 1 Laptop Intel Core I5-8265U, 8Gb Ddr4 Ram, 1Tb Sata 5400 Rpm, Wireless 802.11B / G / N And Bluetooth 4.0 Combo, Ethernet 10 / 100 / 1000, Hd Camera 1280*720 By 30Fps, 1 Hdmi Port , 1Headphone / Microphone – In Combo , Multimedia Card Reader , Win 10 Sl, 15.6” Led Hd, Dvdrw Odd, 1 Yr Onsite Warranty With 1Yr Adp, With Bag 2 1.5 Ton 3 Star With Inverter Split Ac Warranty On Ac 01 Year And Compressor 05 Year 3 Multifunction Color Ink Tank Printer ( Print, Scan, Copy ) Print Speed Mono A4: Up To 33 Ppm, Color A4: Up To 15 Ppm Print Resolution: Up To 5760 X 1440 Dpi, Flat Bed Image Scanner, Copy Speed 20 Cpm, Scan Speed 200 Dpi, 11 Sec. Black, 200 Dpi 32 Sec. Color, Scanner Color Depth 48 Bit Input / 24 Bit Output, Scan Bit Black And White: 16 Bit Input 01 Bit Output Warranty 01 Year. 4 80 Liter Ss Water Cooler With Storage One Year Compressor Warranty, 50 Lph Ro Plant With One Yer Electonic Part Warranty 5 Solar Power Plant 5Kwp Along With Solar Pcu 5Kva / 96 V, With Batteries 150Ah 08 Nos. & Acc For Ground Mounted. Warranty Panal 05 Year Limited Manship, 12 Years Limited Power Warranty 90% Np, 25 Years Limited Power For 80%, 03 Years Warranty On Batteries. Solar Panal, Solar Pcu, Battery ( Vrla ) For Solar, Dcdb ( Standard As If Req. ) , Mounting Structure, Cable / Connectors. 6 Total Schedule K ( 1 To 5 ) L Schedule L : U.P. State Rural Livelihood Mission 1 Utm With :- 1 ) Xg 135 Rev.3 Security Applicance ( In Power Cord ) 2 ) Xg 135 Full Guard With Enhanced Support - 36 Mos 3 ) Full Guard Subscription ( Fg ) Includes Base Firewall ( Firewall, Vpn, Wireless, Network ( Red / Html5, Atp, Ips, Security Heartbeat ) , Web ( Url, Av, Appctrk ) , Email ( As, Av, Spx, Dlp ) , Web Server ( Waf, Av, Rev, Proxy ) , Enhanced Support ( 24*7 Support )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 8
Uttar Pradesh View Result →
48.
Educational and Research Institute #8697543 AOC
Bids Are Invited For A4 Paper - As Given In The Technical Specification , Alpin - As Given In The Technical Specification , Antivirus - As Given In The Technical Specification , Ball Pen Blue - As Given In The Technical Specification , Ball Pen Red - As Given In The Technical Specification , Black Phenyle - As Given In The Technical Specification , Bleeching Powder - As Given In The Technical Specification , Broom - As Given In The Technical Specification , Battery Aa - As Given In The Technical Specification , Brown Cloth Jali Envelop 10 By 14 Medium - As Given In The Technical Specification , Brown Cloth Jali Envelop 12 By 16 Big - As Given In The Technical Specification , Brown Cloth Jali Envelop 8 By 10 Small - As Given In The Technical Specification , Calculator - As Given In The Technical Specification , Calling Bell - As Given In The Technical Specification , Carbon Paper - As Given In The Technical Specification , Ceiling Broom - As Given In The Technical Specification , Cello Tape - As Given In The Technical Specification , Cfl Or Led Bulb - As Given In The Technical Specification , Coaster Stand Glass Cover - As Given In The Technical Specification , Colin Liquid - As Given In The Technical Specification , Computer Paper 10 By 12 By 1 - As Given In The Technical Specification , Computer Paper 10 By 12 By 2 - As Given In The Technical Specification , Computer Paper 15 By 12 By 2 - As Given In The Technical Specification , Computer Sticker - As Given In The Technical Specification , Correction Pen Whitener - As Given In The Technical Specification , Cup And Saucer Set - As Given In The Technical Specification , Cutter Or Knife - As Given In The Technical Specification , Door Mat - As Given In The Technical Specification , Duster Cloth - As Given In The Technical Specification , Detergent Powder - As Given In The Technical Specification , Eraser - As Given In The Technical Specification , Exercise Book - As Given In The Technical Specification , Extension Cord - As Given In The Technical Specification , File Board - As Given In The Technical Specification , File Cover - As Given In The Technical Specification , Flag Page Marker - As Given In The Technical Specification , Floor Cleaner Or Citranala - As Given In The Technical Specification , Floor Cleaning Duster - As Given In The Technical Specification , Fs Or Legal Paper - As Given In The Technical Specification , Glu Stick Or Febi Stick - As Given In The Technical Specification , Goodnight Machine - As Given In The Technical Specification , Goodnight Refill - As Given In The Technical Specification , Gum Bottle Half Litre - As Given In The Technical Specification , Gum Tube - As Given In The Technical Specification , Hand Sanitizer - As Given In The Technical Specification , Hand Towel Small - As Given In The Technical Specification , Hand Wash - As Given In The Technical Specification , Highlighter - As Given In The Technical Specification , Letter Head - As Given In The Technical Specification , Marker Pen - As Given In The Technical Specification , Markin Cloth - As Given In The Technical Specification , Naptholene Ball - As Given In The Technical Specification , Needle - As Given In The Technical Specification , Note Sheet - As Given In The Technical Specification , Odonil - As Given In The Technical Specification , Ohp Marker Pen - As Given In The Technical Specification , Paper Weight - As Given In The Technical Specification , Pen Drive 64 Gb - As Given In The Technical Specification , Pen Stand - As Given In The Technical Specification , Pencil Battery Aaa - As Given In The Technical Specification , Pilot Pen Or Hi Tech Pen Blue - As Given In The Technical Specification , Plastic Bucket - As Given In The Technical Specification , Plastic Dustbin - As Given In The Technical Specification , Plastic Mug - As Given In The Technical Specification , Plastic Sutlee - As Given In The Technical Specification , Punching Machine - As Given In The Technical Specification , Punching Machine Double - As Given In The Technical Specification , Register No 10 - As Given In The Technical Specification , Register No 20 - As Given In The Technical Specification , Room Freshner - As Given In The Technical Specification , Rubber Band - As Given In The Technical Specification , Scale - As Given In The Technical Specification , Scissor Big Small Combo - As Given In The Technical Specification , Sealing Wax - As Given In The Technical Specification , Service Book - As Given In The Technical Specification , Sharpener - As Given In The Technical Specification , Sketch Pen - As Given In The Technical Specification , Stamp Pad - As Given In The Technical Specification , Stamp Pad Ink - As Given In The Technical Specification , Stapler Machine Big - As Given In The Technical Specification , Stapler Machine Small - As Given In The Technical Specification , Stapler Pin Big - As Given In The Technical Specification , Stapler Pin Small - As Given In The Technical Specification , Toilet Cleaner - As Given In The Technical Specification , Toilet Brush - As Given In The Technical Specification , Towel Big - As Given In The Technical Specification , Tube Light - As Given In The Technical Specification , Tumbler Glass Set - As Given In The Technical Specification , U Clip - As Given In The Technical Specification , Water Jug - As Given In The Technical Specification , Water Sponge Or Dumper - As Given In The Technical Specification , White Phenyle - As Given In The Technical Specification , Window Envelop - As Given In The Technical Specification , Wiper - As Given In The Technical Specification , Wooden Pencil - As Given In The Technical Specification , Writing Pad - As Given In The Technical Specification , Mouse Pad - As Given In The Technical Specification , Cartridge 137A - As Given In The Technical Specification , Id Card Holder And Strips - As Given In The Technical Specification , Id Card Strips - As Given In The Technical Specification , Plastic Folder - As Given In The Technical Specification , Wipes Face Tissues - As Given In The Technical Specification , Photocopy Machine Cartridge - As Given In The Technical Specification , Zip Lock Bags Plastic - As Given In The Technical Specification , Dinner Set - As Given In The Technical Specification , Electric Kettle - As Given In The Technical Specification , Notepad Premium - As Given In The Technical Specification , Premium Cup Plate Set - As Given In The Technical Specification , Post Card Size Cards Cso X Red - As Given In The Technical Specification , Post Card Size Cards Cso Xii Blue - As Given In The Technical Specification , Wooden Spoon - As Given In The Technical Specification , Tag - As Given In The Technical Specification , Bedsheet With Pillow Cover Single - As Given In The Technical Specification , A4 Paper Ream Pink - As Given In The Technical Specification , Wall Clock - As Given In The Technical Specification , Wired Mouse - As Given In The Technical Specification , Peon Book - As Given In The Technical Specification , Stock Register Books And Stationery - As Given In The Technical Specification , Diary Dispatch Register - As Given In The Technical Specification , Diary Receipt Register - As Given In The Technical Specification , Table Lamp Charging - As Given In The Technical Specification , Summer Quilt - As Given In The Technical Specification , Signature Blanket Single Bed Three Ply - As Given In The Technical Specification , Cea Register - As Given In The Technical Specification , Cl Register - As Given In The Technical Specification , Attendance Register - As Given In The Technical Specification , Lsa Register - As Given In The Technical Specification , Pbr Register - As Given In The Technical Specification , Candle - As Given In The Technical Specification , Match Box - As Given In The Technical Specification , Poker Very Big Needle - As Given In The Technical Specification , Plastic Bag - As Given In The Technical Specification , Tea Cup Set - As Given In The Technical Specification , Mosquito Repellent Spray - As Given In The Technical Specification , Coackroach Repellent Spray - As Given In The Technical Specification , Stainless Steel Spoon - As Given In The Technical Specification , Room Heater - As Given In The Technical Specification , A4 Paper Ream Green - As Given In The Technical Specification , Index File - As Given In The Technical Specification , High Capacity Cover File High Quality - As Given In The Technical Specification , Notice Board 3 And 4 Feet - As Given In The Technical Specification Total Quantity : 94394
Contract Date: Ref. Documents Contract Value : ₹ 43.04 Lakh
Government Departments No of Bidders 10
Assam View Result →
49.
Drinking Water Supply and Sanitation #8654487 AOC
Bids Are Invited For Manpower Outsourcing Services - Minimum Wage - Highly- Skilled; At Least One Year Diploma In Graphic Design, Multimedia, Video Editing, Or Any Other Relevant Field From A Recognized Institution; Others , Manpower Outsourcing Services - Minimum Wage - Highly-Skilled; Graduate In Any Discipline, Preferred Qualification: Degree In English, Mass Communication, Development Studies, Or Related Field; Admin , Manpower Outsourcing Services - Minimum Wage - Highly-Skilled; Graduate In Commerce With Knowledge Of Tally; Finance/Accounts , Manpower Outsourcing Services - Minimum Wage - Highly-Skilled; Graduate Or Diploma In Any Discipline With Sound Knowledge In Computer, Should Be Well Conversant In English & Hindi And Candidates With Science Or Technical Skills Will Be Preferred; Adm.. , Manpower Outsourcing Services - Minimum Wage - Highly- Skilled; Graduate Or Diploma In Computers; It-Technical , Manpower Outsourcing Services - Minimum Wage - Highly- Skilled; Graduate Or Diploma With Experience In Av Operations & Maintenance; Others , Manpower Outsourcing Services - Minimum Wage - Semi-Skilled; Minimum 10Th Pass With Knowledge Of Office Support And Caretaking Of Office Or Hostel Or Guest House; Admin , Manpower Outsourcing Services - Minimum Wage - Skilled; 10Th (10 Plus 2 Preferred) With Good Typing Speed In Hindi & English; Admin , Manpower Outsourcing Services - Minimum Wage - Skilled; Minimum Graduation Preferably From Science And Management Discipline Pleasing Personality With Excellent Reading, Writing, And Speaking Skills In Both English & Hindi; Admin , Manpower Outsourcing Services - Minimum Wage - Highly-Skilled; Graduate With 3 Years Of Experience In A Facility Management Of An Establishment Having At Least Handling 100 Persons Per Day; Others
Contract Date: Ref. Documents Contract Value : ₹ 1.57 Crore
Government Departments No of Bidders 327
West Bengal View Result →
50.
Defence #8647840 AOC
Tender For Periodical Services To Technical Area Zone A Area At Af Stn Sonegaon, Nagpur.; 1 M & L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7/9 to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and as directed. 2 M & L for waterproof cement based putty @ 1 Kg (undiluted) Per Sqm. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps: -Step - 1 Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step - 2 Apply the first coat the prepared mixture with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI.Step - 3 Allow 6-8 hrs time to dry the putty surface. 3 M & L for one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of Min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and as directed. 4 M & L for applying two coats of oil bound distemper using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note: - Sanding of surface to be done by mechanical sander with 1500 - 2700 RPM, with internal dust extraction system for clean environment certified by paint manufacturer. 5 M & L for two coats of smooth interior acrylic emulsion with rich matt finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltrs (undiluted) /10 Sq Mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions complete all as specified and as directed. 6 M & L for two coats of smooth interior acrylic emulsion with Texture finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltrs (undiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions complete all as specified and as directed. 7 M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and as directed. Note:- Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. 8 M & L for one coat of acrylic water based exterior grade primer @0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and as directed. 9 M & L for two coat water based premium acrylic smooth exterior emulsion of approved colourwith silicon additive & Colour stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 Sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and as directed.Note for Item No 1.00 to 9.00 above: - (a) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.(b)The contractor shall upload along with the documents under Cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. 10 M & L for preparation of old surfaces (plastered or un-plastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash, complete, all as specified and as directed. 11 M & L for preparation of old surfaces (plastered or un-plastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling, complete, all as specified and as directed. 12 M & L for preparation of old surfaces (plastered or un-plastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of white wash on wall,complete,all as specified and as directed. 13 M & L for obliterating old writing of any description, not exc 0.1 sqm with paint to match existing works complete all as specified and as directed. 14 M & L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white basesynthetic enamel paint complete all as specified and as directed. 15 Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including taking down tiles wherever required including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. 16 M & L for rendering 15mm thick in cement mortar 1:6 on surfaces other than fair face of brick work of walls, finished even and smooth without using extra cement complete all as specified and as directed. 17 M & L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, chajja, fins facia etc upto 3 stories height mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and as directed.Note: - (a) Supply only water proofing compound shall be measured and paid for separately.(b) Cost of scaffolding upto 3 storied height of building for rendering is included in this item.(c) Rendering will be done in two layer. 1st layer will be 10 mm thick and 2nd layer will be 5 mm thick. 18 Supply only integral water proofing compound (ISI marked) complete all as specified and as directed. 19 M & L Preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and as directed. 20 M & L Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and as directed. 21 M & L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on existing work where required with two or more coats complete all as specified and as directed.
Contract Date: Jan 20, 2026 Contract Value : ₹ 6.47 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Maharashtra View Result →
TenderDetail
Loading tenders