View Bid Results For Revenue Audit Tenders

We found 112 Bid Results related to revenue audit tenders. You can find Contractor details who won revenue audit tenders along with contract details in Bid awards announcements section.

Filters
Stage
97
13
2
Tender Publishing Platform
4
108
State / UT
15
84
4
4
3
3
3
3
1
1
1
1
1
1
1
1
Contract Value
22
69
18
3
Publish Date
3
0
0
0
0
Sector
10
87
6
6
4
2
2
2
1
1
1
Ownership
5
97
6
6
2
1
Within keyword
Active filters:
Showing 1–3 of 112 tenders matching your filters
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Madhya Pradesh View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 12
Madhya Pradesh View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 10
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 10
5.
Housing Urban and Rular Development #11415087 Technical Bid
Tender for (I) Designing, P And F, Commissioning And Testing Of Vacuum- Operated Automatic Switchover Gas Chlorination System With 1 Working Chlorinator Plus 1 Standby Chlorinator Compatible With The Existing Gas Chlorination System With Three Months Trial Run And One Year Defect Liability Period. (Ii) Designing, P And F, Commissioning And Testing Of Chlorine Gas Dry Scrubber Consisting Of Support Structures, Ductwork Of Scrubber, Blower, Dry Scrubbing Tank, Dry Scrubbing Media, Necessary Piping, Motors, Controls, Exhaust Stack And Essential Accessories With Three Months Trial Run And One Year Defect Liability Period. Pandf Of Prefab Porta Cabin Of Size 1.83 M. X 1.83 M. And Height 2.3 M. With One Side Slope Design With 50 Mm Puf Wall Panels With Pre Painted Galvanized Sheet And 20/60 Mm Corrugated Puf Roof Panels With Pre Painted Galvanized Sheet With Door, Windows Etc. Complete In All Respect. (Iii) Designing, Pand F, Commissioning And Testing Of Auto-Shut Off Valve With Three Months Trial Run And One Year Defect Liability Period. (Iv) P And F Of Dual Gas Cylinder Duly Certified And Approved By Bis And By Explosive Department Of Govt. Of India, Nagpur Of 100 Kg Capacity Cylinder As Per Is 3196 Part -Iv. (V) Providing, Fixing, Installation, Commissioning And Testing Of Chlorine Leak Detector With Alarm/Hooter. (As Per Technical Specifications Of Gaseous Chlorination System As Per Letter Of Eic, Phed, Pkl. Memo No. 23070-23142-Phe/Mont. Dated 28/02/2024 (Copy Attached). , Ht. Alluminium Cable: Supply Erection Testing Of Standard Make Xlpe 3 Core Ht / 11 Kv Grade Isi Marked Stranded Compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting Compound, Xlpe Insulated, Insulation Screening With Extruded Semi Conducting Compound In Combination With Copper Tape, Cores Laid Up, Innersheath Of Pvc, Galvanised Steel Flat Strip Armoured, And Overall Pvc Sheathed Cable Conforming To Is 7098 (Part-2) 2011 With Up To Date Amendments For Making Following Connection A) From G.O Switch To Metering Equipment . B) From Metering Equipment To Transformer Complete In All Respect. Make: Indian Cables Ltd./ Polycab / repair renovation Cables / Finolex / Havells Cables. 35 Sqmm Size , Ht Metering Panel: Supply Indoor Type 11Kv Vcb Control Cubical Panel With Vertical Isolation Type Breaker As Per Relevant Is As Amended Up To Date And Additional Specifications, Having Capacities As Mentioned Below, Single Break Trip Free Mechanism, Manually Charged And Auto/Manually Closing Breaker Suitable For Use On 11Kv, 3 Phase 50Hz Ac, Supply With Short Circuit Fault Level Of 500 Amps Capacity, Breaker Featured With Local On/Off Indicator With Hand Trip Device, Spring Release Coil, Shunt Trip Coil And Auxiliary Switch Of 2No Plus 2Nc And Equipped With Following Switchgears And Accessories Including Making Suitable Structure Arrangement For Installation, Control Wiring And Connections Etc. As Reqd. (1 Ic Plus 2 Og) A). Vcb, 11Kv, 630Amp, 50Ka. B). 1Ph 11Kv/110 Volts Pt (Indoor Type) Class 0.2 Accuracy And 100 Va Burden -3 NoS. C). 33Kv Indoor Dead Type Dual Core Dual Ratio 3Cts Of Ratio 200-100/5-5 A Of 15 Va Burden, Ps 5 P10 And Accuracy Class 0.2. D). Control Panel- Cubicle Type Control Panel Suitable For Floor Mounting Made Out Of 1.63 Mm Cr Sheet Duly Powder Coated And With Following Relays. E). Microprocessor Based Numerical Relay For O/L, E/F And Sc Protection Suitable For Above. F). Master Trip Relay -2 NoS. G). Indicator Type Annunciator Panel With Buzzer. H). Digital Volt Meter- 0-11 Kv. I). Digital annual periodical maintenance Meter- 0-100 Amp. J). Ryb/ Trip/Closing/Spring Charged Indicator Lamp. K). Fault Annunciator Panel For O/L, Wti, Oti And Buchhloz Relay Alarm And Trip Auxiliary Relay. L). Tnc Switch For Operation. M). Multifunction Meter Em6400ng. N). Tcs Relay For Safe , Providing, Fixing, Lointing, Testing Of Mechanical Joints Complete With Rubber Gaskit, Galvanized Nuts And Bolts Including Labor, Tranportaion Ets Up To The Site. 300 Mm Nominal Diameter , Copper Cable: Supply, Erection, Testing And Commissioning Of Is Marked 3 Core Copper Cables, Solid Copper Conductor Up To 6Sqmm And Balance Stranded Copper, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Glavanised Wire For Cables Up To 10X1.5Sqmm, 8X2.5Sqmm, 2X10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip), Extruded Pvc Type St2 Outer Sheathed, /1100 V Grade As Per Is 7098 (Part 1) 1988 With Up To Date Amendments Along With All Accessories Like Thimble Lugs Etc For Motors As Per Entire Satisfaction Of Engineer-In Charge Complete In All Respect. Make:Finolex / Havells / repair renovation Cables. (150 Sqmm Size) , -Design, Supply, Installation And Testing Of Vfd Along With Distribution Panel In Enclosure For Motor Rating Of 105 Hp. Enclosure Shall Be Ip54. The Panel Shall Be Equipped With Mccb Tp With Suitable Rating, Spreader Link Tp, Extended Rotary Handle, Volt Meter Digital, Volt Selector Switch, annual periodical maintenance Meter, annual periodical maintenance Selector Switch, C.T With Suitable Rating, Control Mcb Sp With Suitable Rating, Pla Relay, Pushbutton Red Plus Green With Element, Indicator On/Off, Aluminium Bus Bar/Suitable Rating Power And Control Wiring Labour And Margin, Fabrication With Minimum Sheet Thickness Of 2 Mm For Load Bearing And Non-Load Bearing Side. Vfd Should Be Capable Of Protecting Motor From High And Low Voltage And Earth Fault As Well. Vfd Should Restrict Harmonics Up To 35% Vfd Should Be Capable Of Providing Starting Torque Up To 200% While Starting Motor. It Should Have Class 3C3 (Avg)Conformal Coating So That Components Are Safe From Dust And Moisture. Communication -Built-In Rs485 Modbus Rtu, Ambient Temperature -Heavy Duty: -10 ~ 50 Deg C Normal Duty: -10 ~ 40 Deg C, Pcb Protection Conformal Coating Complying To Iec 60721-3-3 Class 3C3, Application Humidity Below Relative Humidity 95% Rh (No Condensation) Altitude 0 To 1,000 M Without Deration 1,001 To 4,000 M With Deration Of 1% Per Rise In 100 M, Vibration Up To 9.8 M/Sec2 (1.0 G), Global Compliance Ce, Ul, Rohs, Control Method V/F Control, Sensorless Vector Control, Slip Compensation, Closed Loop Vector Control. Starting Torque 200% At 0.5Hz In Sensorless Vector Control And 150% At 3Hz In V/F, Frequency Control Range 0 To 400Hz In V/F, 0 To 300Hz In Sensorless 1, 0 To 120Hz In Sensorless 2 / Vector, Frequency Precision Setting- Digital: 0.01Hz, Analog: 0.03Hz (60Hz Base). Complete With All Other Accessories As Required. (At Mbs Near Yamuna River) , Ns Item -Lt Cable Alluminium: Supply, Erection, Testing And Commissioning Of Is Marked 3.5 Core Cables, Solid Aluminum Conductor Up To 10Sqmm And Balance Stranded Conductor, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Aluminium Wire For Single Core Up To 70Sqmm And Balance Aluminium Strip, Glavanised Wire For Cables Up To2x10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip) Extruded Pvc Type St2 Outer Sheathed, 650/1100V Grade As Per Is7098 (Part-1) 1988 With Up To Date Amendments Along With All Accessories Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (300 Sqmm Size). , -Cloud Based Software Comprising Of Middleware, Database And Front-End Web Interface Through Suitable Dashboards, Aggregation Screens And Gis Assisted Drill-Down From Macro To Micro To Be Provided. Application Data Hosting And Maintenance For Five Years Included In Scope. Cloud Servicesof Ministry Of Electronics And Information Technology (Meity), Government Of India Empaneled Cloud Service Providers Shall Be Taken Like Microsoft, Amazon, Google, Bsnl Etc. Cloud Service Provider Must Adhere The Security Standards And Guidelines Issued By Meity From Time-To-Time. As The Data Belongs To The State Government Of Haryana, Therefore The Application And Data Hosted On Cloud Must Be Kept And Stored In Data Centres Located In India Only. Any Change In Application Requirement Or Infrastructure Shall Be Borne By The Implementation Agency. Implementation Agency Shall Carry Out The Application Security Audit From A Certified Auditor (Ca). Application And Data Shall Be Kept Confidential And Only The Authorized Users Shall Have The Access To It. Implementation Agency Shall Be Responsible For Any Data Theft Or Data Leakages. , Ns Item -Online Chlorine Sensor : Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Online Chlorine Sensor. (For Mbs) , Ns Item -Rtu: Functional Integration At Rtu-Cum-Gateway For Motorized Control Valve In Pump Control Panel (For Mbs) , Ns Item -Electromagnetic Flowmeter: Supply, Installation, Testing, Commissioning Five Year Maintenance, Electromagnetic Flowmeter Along With Its Installation Complete In All Respect As Per Specifications. Size As Per Site Requirement.(Ip-68), Rs-485 Modbus. Line Size 400 Mm, Installed At Pump End / Source. (For Mbs) , Ns Item -Automation Panel: Automation Panel For Integration With Vfd With Pump Control Panel, Along With Auto/Manual Selection Switch As Well As On/Off Push Button To Be Provided. Manual Selection Between Pump 1 And Pump 2 Depending On Which To Be Operated And Which To Be Stand By To Be Provided, Along With All Relay Interlocks And Provision Of Operation Of Pumps Through Potential Free/Open Collector Digital Outputs Of Rtu-Cum-Gateway Device. The Panel Will Contain Rtu-Cum-Gateway With Necessary I/Os And Edge Controller Motorized Control Valve In Local / Remote Or Auto/ Manual Modes Of Operation In Tandem With Cloud Scheduler Or Level Sensor-Based Functions. Panel Will Contain Smps With Rechargeable Battery Backup (Min. 24 Hrs.) Along With Facility To Connect All Field Instruments With 24 Vdc Power Supply. (For Mbs , Ns Item -Radar And Water Level Transmitter: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Radar And Water Level Transmitter Alongwith According To Water Level In Ohsr (For Ohsr) Ingress Protection - Ip 66, Measuring Range - Up To 20 M, Process Temp.- -40 To 60 Deg. C, Full Pvdf Body - For A Long Sensor Lifetime. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order. (For Mbs) , Ns Item -Sim Card: Sim Cards For Five Year Maintenance Of All The Instrument Above As Required. ( For Mbs) , Ns Item -Butterfly Valve: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Butterfly Valve With Electrical Actuator Body Material - Ci/Dipressure Rating - Pn16 Feedback - 100% Open And 100% Close. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order 400 Mm , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 160 Kva (As Per Parameters Of Cpcb 4) 160 Kva (As Per Parameters Of Cpcb 4) , Clear Water Pump: Supplying, Erection, Testing And Commissioning Of Horizontal Motor Pumping Set For Clear Water Having Head As Per The Indicated Requirements Of Discharge In Lpm And Power Capacity In Bhp As Per Is Marked 8400 Lpm X 30.00 M Head (At Mbs) , Ns Item -Design, Construction, Erection And Commissioning Of 1 Ranneywell (Radial Collector Well) Of 10.00 Mld Capacity With Minimum Sinking Depth Of 30 Mtr And 1000 Mtr Long Laterals Pipe In 4 Layers, All Civil, Mechanical And Electrical Works Including Transformer As Per Design Along With All Accessories And Cables, Cubicai Type Lt/Ht Panels, Vcb Panels, All Types Of Cablings With Cable Tray, Chemical Earthings Of All Machineries, 4 Vt Pumps (3W Plus 1S) Having Capacity 180.00 M³/Hr. X 30 M Head, Vfd Panels, M.S Header With All Necessary Fittings, Gantry As Per Design, Electromagnetic Flow Meters At All Outlets And Inlets, Field Office (4 Mtr X 4 Mtr With Attach Toilet), Horticulture And Landscaping (3000 Sqm) Including Purchase Of 1.50 Acre Land (For Ranneywell, Mbs And Approach Path From Revenue Rasta To Well), Earth Filling In Ranneywell Complex. 1 High Mast Street Light 12.5 Mtr High Pole With 8 Luminous Lights, Wire / Cable, Switch. Mcb And Proper Foundation Etc Complete In All Respect. 10 Cp Plus Cctv Hd Coloured Night Vision Cameras And 1 360 Degree Dome Camera Fitted At 11 M. High Pole Along With Proper Foundation With Hd Night Vision. Plc/Scada Based Automation And Monitoring System. All The Pumping Machinery, Panel Board, Flow Meter, Level Sensor Etc Shall Be Controlled By Plc And Scada And Shall Be Synchronized With Plc Panels At Ranneywell And Mbs Site Through Broadband Internet Facility. The Work Will Be Carried Out Strictly As Per Detailed Scope Of Works, Specifications, Conditions Mentioned In The Dnit And Entire Satisfaction Of Engineer-In-Charge. (80 % Capital Cost Plus 20 % O/M Cost Payement Schedule Attached With Dnit.) , Hsr Itmes
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 59
7.
Housing Urban and Rular Development #11294593 Technical Bid
Tender for (I) Designing, P And F, Commissioning And Testing Of Vacuum- Operated Automatic Switchover Gas Chlorination System With 1 Working Chlorinator Plus 1 Standby Chlorinator Compatible With The Existing Gas Chlorination System With Three Months Trial Run And One Year Defect Liability Period. (Ii) Designing, P And F, Commissioning And Testing Of Chlorine Gas Dry Scrubber Consisting Of Support Structures, Ductwork Of Scrubber, Blower, Dry Scrubbing Tank, Dry Scrubbing Media, Necessary Piping, Motors, Controls, Exhaust Stack And Essential Accessories With Three Months Trial Run And One Year Defect Liability Period. Pandf Of Prefab Porta Cabin Of Size 1.83 M. X 1.83 M. And Height 2.3 M. With One Side Slope Design With 50 Mm Puf Wall Panels With Pre Painted Galvanized Sheet And 20/60 Mm Corrugated Puf Roof Panels With Pre Painted Galvanized Sheet With Door, Windows Etc. Complete In All Respect. (Iii) Designing, Pand F, Commissioning And Testing Of Auto-Shut Off Valve With Three Months Trial Run And One Year Defect Liability Period. (Iv) P And F Of Dual Gas Cylinder Duly Certified And Approved By Bis And By Explosive Department Of Govt. Of India, Nagpur Of 100 Kg Capacity Cylinder As Per Is 3196 Part -Iv. (V) Providing, Fixing, Installation, Commissioning And Testing Of Chlorine Leak Detector With Alarm/Hooter. (As Per Technical Specifications Of Gaseous Chlorination System As Per Letter Of Eic, Phed, Pkl. Memo No. 23070-23142-Phe/Mont. Dated 28/02/2024 (Copy Attached). , Ht Metering Panel: Supply Indoor Type 11Kv Vcb Control Cubical Panel With Vertical Isolation Type Breaker As Per Relevant Is As Amended Up To Date And Additional Specifications, Having Capacities As Mentioned Below, Single Break Trip Free Mechanism, Manually Charged And Auto/Manually Closing Breaker Suitable For Use On 11Kv, 3 Phase 50Hz Ac, Supply With Short Circuit Fault Level Of 500 Amps Capacity, Breaker Featured With Local On/Off Indicator With Hand Trip Device, Spring Release Coil, Shunt Trip Coil And Auxiliary Switch Of 2No Plus 2Nc And Equipped With Following Switchgears And Accessories Including Making Suitable Structure Arrangement For Installation, Control Wiring And Connections Etc. As Reqd. (1 Ic Plus 2 Og) A). Vcb, 11Kv, 630Amp, 50Ka. B). 1Ph 11Kv/110 Volts Pt (Indoor Type) Class 0.2 Accuracy And 100 Va Burden -3 NoS. C). 33Kv Indoor Dead Type Dual Core Dual Ratio 3Cts Of Ratio 200-100/5-5 A Of 15 Va Burden, Ps 5 P10 And Accuracy Class 0.2. D). Control Panel- Cubicle Type Control Panel Suitable For Floor Mounting Made Out Of 1.63 Mm Cr Sheet Duly Powder Coated And With Following Relays. E). Microprocessor Based Numerical Relay For O/L, E/F And Sc Protection Suitable For Above. F). Master Trip Relay -2 NoS. G). Indicator Type Annunciator Panel With Buzzer. H). Digital Volt Meter- 0-11 Kv. I). Digital annual periodical maintenance Meter- 0-100 Amp. J). Ryb/ Trip/Closing/Spring Charged Indicator Lamp. K). Fault Annunciator Panel For O/L, Wti, Oti And Buchhloz Relay Alarm And Trip Auxiliary Relay. L). Tnc Switch For Operation. M). Multifunction Meter Em6400ng. N). Tcs Relay For Safe , Providing, Fixing, Lointing, Testing Of Mechanical Joints Complete With Rubber Gaskit, Galvanized Nuts And Bolts Including Labor, Tranportaion Ets Up To The Site. 300 Mm Nominal Diameter , Copper Cable: Supply, Erection, Testing And Commissioning Of Is Marked 3 Core Copper Cables, Solid Copper Conductor Up To 6Sqmm And Balance Stranded Copper, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Glavanised Wire For Cables Up To 10X1.5Sqmm, 8X2.5Sqmm, 2X10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip), Extruded Pvc Type St2 Outer Sheathed, /1100 V Grade As Per Is 7098 (Part 1) 1988 With Up To Date Amendments Along With All Accessories Like Thimble Lugs Etc For Motors As Per Entire Satisfaction Of Engineer-In Charge Complete In All Respect. Make:Finolex / Havells / repair renovation Cables. (150 Sqmm Size) , Ns Item -Lt Cable Alluminium: Supply, Erection, Testing And Commissioning Of Is Marked 3.5 Core Cables, Solid Aluminum Conductor Up To 10Sqmm And Balance Stranded Conductor, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Aluminium Wire For Single Core Up To 70Sqmm And Balance Aluminium Strip, Glavanised Wire For Cables Up To2x10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip) Extruded Pvc Type St2 Outer Sheathed, 650/1100V Grade As Per Is7098 (Part-1) 1988 With Up To Date Amendments Along With All Accessories Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (300 Sqmm Size). , Cloud Based Software Comprising Of Middleware, Database And Front-End Web Interface Through Suitable Dashboards, Aggregation Screens And Gis Assisted Drill-Down From Macro To Micro To Be Provided. Application Data Hosting And Maintenance For Five Years Included In Scope. Cloud Servicesof Ministry Of Electronics And Information Technology (Meity), Government Of India Empaneled Cloud Service Providers Shall Be Taken Like Microsoft, Amazon, Google, Bsnl Etc. Cloud Service Provider Must Adhere The Security Standards And Guidelines Issued By Meity From Time-To-Time. As The Data Belongs To The State Government Of Haryana, Therefore The Application And Data Hosted On Cloud Must Be Kept And Stored In Data Centres Located In India Only. Any Change In Application Requirement Or Infrastructure Shall Be Borne By The Implementation Agency. Implementation Agency Shall Carry Out The Application Security Audit From A Certified Auditor (Ca). Application And Data Shall Be Kept Confidential And Only The Authorized Users Shall Have The Access To It. Implementation Agency Shall Be Responsible For Any Data Theft Or Data Leakages. , Ns Item -Online Chlorine Sensor : Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Online Chlorine Sensor. (For Mbs) , Ns Item -Rtu: Functional Integration At Rtu-Cum-Gateway For Motorized Control Valve In Pump Control Panel (For Mbs) , Ns Item -Electromagnetic Flowmeter: Supply, Installation, Testing, Commissioning Five Year Maintenance, Electromagnetic Flowmeter Along With Its Installation Complete In All Respect As Per Specifications. Size As Per Site Requirement.(Ip-68), Rs-485 Modbus. Line Size 400 Mm, Installed At Pump End / Source. (For Mbs) , Ns Item -Automation Panel: Automation Panel For Integration With Vfd With Pump Control Panel, Along With Auto/Manual Selection Switch As Well As On/Off Push Button To Be Provided. Manual Selection Between Pump 1 And Pump 2 Depending On Which To Be Operated And Which To Be Stand By To Be Provided, Along With All Relay Interlocks And Provision Of Operation Of Pumps Through Potential Free/Open Collector Digital Outputs Of Rtu-Cum-Gateway Device. The Panel Will Contain Rtu-Cum-Gateway With Necessary I/Os And Edge Controller Motorized Control Valve In Local / Remote Or Auto/ Manual Modes Of Operation In Tandem With Cloud Scheduler Or Level Sensor-Based Functions. Panel Will Contain Smps With Rechargeable Battery Backup (Min. 24 Hrs.) Along With Facility To Connect All Field Instruments With 24 Vdc Power Supply. (For Mbs , Ns Item -Radar And Water Level Transmitter: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Radar And Water Level Transmitter Alongwith According To Water Level In Ohsr (For Ohsr) Ingress Protection - Ip 66, Measuring Range - Up To 20 M, Process Temp.- -40 To 60 Deg. C, Full Pvdf Body - For A Long Sensor Lifetime. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order. (For Mbs) , Ns Item -Sim Card: Sim Cards For Five Year Maintenance Of All The Instrument Above As Required. ( For Mbs) , Ns Item -Butterfly Valve: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Butterfly Valve With Electrical Actuator Body Material - Ci/Dipressure Rating - Pn16 Feedback - 100% Open And 100% Close. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order 400 Mm , Ns Item - Ht. Alluminium Cable: Supply Erection Testing Of Standard Make Xlpe 3 Core Ht / 11 Kv Grade Isi Marked Stranded Compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting Compound, Xlpe Insulated, Insulation Screening With Extruded Semi Conducting Compound In Combination With Copper Tape, Cores Laid Up, Innersheath Of Pvc, Galvanised Steel Flat Strip Armoured, And Overall Pvc Sheathed Cable Conforming To Is 7098 (Part-2) 2011 With Up To Date Amendments For Making Following Connection A) From G.O Switch To Metering Equipment . B) From Metering Equipment To Transformer Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (35 Sqmm Size) , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 160 Kva (As Per Parameters Of Cpcb 4) 160 Kva (As Per Parameters Of Cpcb 4) , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 200 Kva (As Per Parameters Of Cpcb 4) 200 Kva (As Per Parameters Of Cpcb 4) , Supplying, Erection, Testing And Commissioning Of Horizontal Centrifugal Clear Water Pumping Set Capacity 2780 Lpm X 50 M Head, 45 Bhp Motor, Complete With Installation At Mbs Near Yamuna River. , Design, Supply, Installation And Testing Of Vfd Along With Distribution Panel In Enclosure For Motor Rating Of 45 Hp. Enclosure Shall Be Ip54. The Panel Shall Be Equipped With Mccb Tp With Suitable Rating, Spreader Link Tp, Extended Rotary Handle, Volt Meter Digital, Volt Selector Switch, annual periodical maintenance Meter, annual periodical maintenance Selector Switch, C.T With Suitable Rating, Control Mcb Sp With Suitable Rating, Pla Relay, Pushbutton Red Plus Green With Element, Indicator On/Off, Aluminium Bus Bar/Suitable Rating Power And Control Wiring Labour And Margin, Fabrication With Minimum Sheet Thickness Of 2 Mm For Load Bearing And Non-Load Bearing Side. Vfd Should Be Capable Of Protecting Motor From High And Low Voltage And Earth Fault As Well. Vfd Should Restrict Harmonics Up To 35% Vfd Should Be Capable Of Providing Starting Torque Up To 200% While Starting Motor. It Should Have Class 3C3 (Avg)Conformal Coating So That Components Are Safe From Dust And Moisture. Communication -Built-In Rs485 Modbus Rtu, Ambient Temperature -Heavy Duty: -10 ~ 50 Deg C Normal Duty: -10 ~ 40 Deg C, Pcb Protection Conformal Coating Complying To Iec 60721-3-3 Class 3C3, Application Humidity Below Relative Humidity 95% Rh (No Condensation) Altitude 0 To 1,000 M Without Deration 1,001 To 4,000 M With Deration Of 1% Per Rise In 100 M, Vibration Up To 9.8 M/Sec2 (1.0 G), Global Compliance Ce, Ul, Rohs, Control Method V/F Control, Sensorless Vector Control, Slip Compensation, Closed Loop Vector Control. Starting Torque 200% At 0.5Hz In Sensorless Vector Control And 150% At 3Hz In V/F, Frequency Control Range 0 To 400Hz In V/F, 0 To 300Hz In Sensorless 1, 0 To 120Hz In Sensorless 2 / Vector, Frequency Precision Setting- Digital: 0.01Hz, Analog: 0.03Hz (60Hz Base). Complete With All Other Accessories As Required. (At Mbs Near Yamuna River) , Design, Construction, Erection And Commissioning Of 2 No. Ranneywell 1 At Machhrola And 1 At Jajjal (Radial Collector Well) Of 10.00 Mld Capacity With Minimum Sinking Depth Of 32 Mtr And 1000 Mtr Long Laterals Pipe In 4 Layers, All Civil, Mechanical And Electrical Works Including Transformer As Per Design Along With All Accessories And Cables, Cubicai Type Lt/Ht Panels, Vcb Panels, All Types Of Cablings With Cable Tray, Chemical Earthings Of All Machineries, 4 Vt Pumps (3W Plus 1S) Having Capacity 180.00 M³/Hr. X 30 M Head, Vfd Panels, M.S Header With All Necessary Fittings, Gantry As Per Design, Electromagnetic Flow Meters At All Outlets And Inlets, Field Office (4 Mtr X 4 Mtr With Attach Toilet), Horticulture And Landscaping (3000 Sqm) Including Purchase Of 2.50 Acre Land (For Ranneywell, Mbs And Approach Path From Revenue Rasta To Well), Earth Filling In Ranneywell Complex. 1 High Mast Street Light 12.5 Mtr High Pole With 8 Luminous Lights, Wire / Cable, Switch. Mcb And Proper Foundation Etc Complete In All Respect. 10 Cp Plus Cctv Hd Coloured Night Vision Cameras And 1 360 Degree Dome Camera Fitted At 11 M. High Pole Along With Proper Foundation With Hd Night Vision. Plc/Scada Based Automation And Monitoring System. All The Pumping Machinery, Panel Board, Flow Meter, Level Sensor Etc Shall Be Controlled By Plc And Scada And Shall Be Synchronized With Plc Panels At Ranneywell And Mbs Site Through Broadband Internet Facility. The Work Will Be Carried Out Strictly As Per Detailed Scope Of Works, Specifications, Conditions Mentioned In The Dnit And Entire Satisfaction Of Engineer-In-Charge. (80 % Capital Cost Plus 20 % O/M Cost Payement Schedule Attached With Dnit.) , Hsr Itmes
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 8
Madhya Pradesh View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 8
Contract Date: Mar 11, 2026 Contract Value : 3.36 Lakh
Government Departments No of Bidders 3
Madhya Pradesh View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 1
Madhya Pradesh View Result →
14.
Public Administrative Department #9339069 Technical Bid
E Tender For The Furnishing Works At Ernakulam , E-Tender For The Furnishing Works At Ernakulam , Modular Workstation With Side Storage And With Sharing Partition*Second Floor Audit Dpt, Accounts, Pd/General Section & Legal Cell Workstation:Partition Size: 1500/1500 Mm L X 50Mm D X 1050Mm Ht. (T Type) Table Size: 1500Mm L X 600Mm D X 750Mm Ht. A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Modular Workstation With Side Storage And With L Type Partition *Second Floor Accounts, Pd/General Section & Legal Cell Workstation:Partition Size: A) 1500/1500Mm L X 50Mm D X 1050Mm Ht. (L Type)Table Size: 1500Mm L X 600Mm D X 750Mm Ht. A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Cabin Table With Side Storage-Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. *Second Floor Audit Officer , Accounts Officer ,Pa To Secretary & Ca To Secretary Room Table:A) Table Size: 1800Mm L X 750Mm D X 750Mm Ht. Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. (Drawer And Open Storage) , *Second Floor Additional Secretary & Secretary Cabin Table:B)Table Size: 2100Mm L X 1200Mm D X 750Mm Ht. Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. , Counter Table With Side Storage *Second Floor Superindent Counter Table:Executive Table With Privacy Partition Size: A)Table Size: 1500Mm L X 750Mm D X 750Mm Ht.Side Storage: 900Mm L X 450Mm D X 750Mm Ht , *Second Floor Pd/General Section Counter Table:B) Table Size:1500Mm L X 750Mm D X 750Mm Ht.Side Storage: 900Mm L X 450Mm D X 750Mm Ht. , Pedestal With Single Drawer And Shutter ( For Workstations) Size : 400Mm L X 450Mm D X 650Mm Ht.Made Of 18 Mm Thick Pre Laminated Particle Board With Telescopic Drawer Runners , Handle And Individual Lock. , 3Door Storage-Size: 1200Mm L X 400Mm D X 1200Mm Ht.Made Of 18Mm Thick Pre Laminated Board With Pvc Edge Binding, With Multipurpose Lock, D Handle And Box Hinges With Necessary Intermediate Vertical Supports Where Ever Necessary To Avoid Shelf Bending Issue. , Storage-Size : 1500Mm L X 450Mm D X 750Mm Ht. Made Of 18 Mm Thick Pre Laminated Board With Pvc Edge Binding, With Multipurpose Lock, D Handle And Box Hinges , Conference Table With 02 Nos Of Pop Up Box ( 8 Module Without Switch &Socket)Size : 4800Mm L X 1200Mm D X 750Mm Ht. (2 Pieces Of 2400Mm Joined Together) * Table Top - Made Of 16Mm 710 Grade Plywood Finished With 1Mm Laminate (Wooden Suede) Edges In Double Thick Finished With 2Mm Thick Pvc Edge Binding Matching With The Laminate Shade.* Understructure – Box Type Legs Made Of 16 Mm 710 Grade Plywood Finished With 1Mm Laminate (Wooden Suede) , Office Atndr Room Table With Side Storage-Table Size : 3370Mm L X 450Mm D X 750Mm Ht. (2 Pieces Of 169Mm Joined Together)Side Storage Size : 3370Mm L X 450Mm D X 750Mm Ht. (2 Pieces Of 169Mm Joined Together)A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Bindingb)Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Dinning Room Table- Second Floor 4 Seater Dinningtabletable Size : 4420Mm L X 700Mm D X 750Mm Ht. (2 Pieces Of 2210Mm Joined Together)A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Second Floor2 Seater Dinning Tabletable Size : 700Mm L X 700Mm D X 750Mm Ht.A) Table Top - 25Mm Thick Pre-Lam-Particle Board With Pvc Edge Binding. B)Understructure - Box Type Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Waiting Area Counter Table-Table Size : 1930Mm L X 400Mm D X 750Mm Ht.A) Table Top - 25Mm Thick Pre-Lam-Particle Board With Pvc Edge Binding. B)Understructure - Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Providing And Supplying Of Encardo 3Str Dimensions W X H X D (Cm) - 179 X 85 X 83.5 Finish Color - Cappuccino Net Weight (Kg) - 85 Primary Material - Solid Wood Upholstery Material - Leatherette Seat Height (Cm) - 55 Warranty - 1 Year Style - Contemporary & Modern Delivery Condition - Knock Down , Providing And Supplying Of Encardo 2Str Dimensions W X H X D (Cm) - 125 X 85 X 83.5 Thickness Of Plywood Used(Mm) : 12 Mm Leg Material: * Material Of Leg : (Plastic / Insert Moulding / Wooden/ Ms + Chrome Plating / Ss) :-Wooden Hanlde Is The Leg Frame Material (Tropical Wood / Pine Wood/ Rubber Wood): Pine Wood Seat Height (Cm) - 47 Warranty - 1 Year , Providing, Supplying And Placing Of High Back Chair.Seat/Back Assembly : The Cushioned Seat Should Bemade Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Beupholstered With Pure Leather And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgffor 25% Compression.The Cushioned Back Should Bemade Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Pure Leather. Seat Size : 47.6 Cm. (W) X 49.2 Cm. (D) Back Size : 47.5 Cm. (W) X 77 Cm. (D) Armrests: The Armrest Top Should Bemoulded From Polyurethane(Pu), Upholstered In Pure Leather And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps. Active Bio-Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features: • 360° Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat/Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Bemade Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment: Seat Depth Adjustment Should Beintegrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Beof 6.0±0.5 Cm. Adjustable Back Support: Back Frame Should Beconnected To The Up/Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. Pneumatic Ht. Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. Pedestal Assembly The Pedestal Should Behigh Pressure Die Cast Polishedaluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be65.0 ± 0.5Cm. Pitch-Center Dia.(75.0 ± 1.0Cm. With Castors.) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Mouldedin Black Polypropylene. Overall Dimensions Of Chair Seat Height -44.5 To 54.5 Cm. Height -114.0-131.5 Cm. Width & Depth Of Chair As Measured From Base - Width-76.1 Cm And Depth-76.1 Cm , Mid Back Office Chair.Providing & Laying Revolving Chair With Arm Rest. The Seat And Back Cushion Of The Chairs Should Be Pressed On 12Mm Hot Press Moulded Ply The Seat Cushion Of The Chair Should Be Made Up Of 50Mm Thick High Density Of 45±2 Kg/M3 Polyurethane Mould And Back Cushion Should Be Made Up Of 38Mm Thick High Density 33±2 Kg/M3. The Polyurethane Foam Shall Be As Per Manufacturer’S Specification. The Hardness Of Foam Shall Be 20 Kg On Hampden Machine And 25% Compression And It Should Be Covered With Fabric As Per Manufacturer’S Shade Card .The Arms Of The Chairs Should Be Black. The Gas Lift Mechanism Should Be Tested As Per Bifma X 05.01.2002 Standards .The Pedestal Should Be Five Legged Injection Moulded In Black 30% Glass –Filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, Twin Wheel Castors Confirming To Bifma Standards X 05.01.2002 Tested To Perform 1,00,000 Cycles With 225 Lbs Load. It Should Have Synchro Single Point Locking Arrangement. (Note -The Back And Base Of Chair Should Be Supplied With Fabric Upholstered ) Overall Height Of Chair Should Be Minimum 970 Mm ( Inclusive Of Maximum Adjustment Of Gas Lift Mechanism ) , Visitor Chair - Model Smat Cantilever The Seat And Back Are Made Up Of 1.2 Cm Thick Hot Pressed Plywood, Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lipping All Around. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. Back Size: 49.0Cm.(W) X 47.0Cm.(H) Seat Size: 49.0Cm.(W) X 44.0Cm.(D). Polyurethane Foam: The Polyurethane Foam Is Moulded With Density = 45 +/-2 Kg/M3 And Hardness = 20 +/- 2 On Hampden Machine At 25% Compression. Tubular Frame: The Tubular Frame Is Cantilever Type & Made Of Dia.2.54Cm.(1”)X 14 Bg M.S. E.R.W. Tube And Black Powder Coated. , Conference Hall Chair-Providing, Supplying And Placing Of Mid Back Chair. Seat/Back Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. Seat Size : 47.0 Cm. (W) X 48.0 Cm. (D) Mid Back Size: 47.7 Cm. (W) X 60.1 Cm. (D) Armrests: The Armrest Top Should Be Moulded From Polyurethane(Pu) And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S. E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps. Active Bio-Synchro Mechanism : The Adjustable Tilting Mechanism Should Be Designed With The Following Features: • 360 Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat/Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Be Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment: Seat Depth Adjustment Should Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Be Of 6.0±0.5 Cm. Adjustable Back Support : Back Frame Should Be Connected To The Up/Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. Pneumatic Ht. Adjustment : The Pneumatic Ht Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. Pedestal Assembly: The Pedestal Should Be High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 65.0 ± 0.5Cm. Pitch-Center Dia.(75.0 ± 1.0Cm. With Castors.) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter. Overall Dimensions Of Chair Seat Height -43.1-53.1Cm Height -96.5-114.0.Cm. Width & Depth Of Chair As Measured From Base - Width-76.1 Cm And Depth-76.1 Cm , Providing, Supplying And Placing Of Waiting Chair. Seat Shell :The Seat Shell Should Bea Welded Assembly Of Seat,Back And Side Frame. The Seat And Back Should Bemade Of 0.12±0.013Cm Thk Cr Steel Sheet With Oblong Perforations.They Should Bewelded To Sideframe Of Size 3.2±0.05Cm X 0.5 ± 0.05 Cm Thk Hr Steel.The Welded Assembly Should Bepowder Coated ( Dft 40-60 Microns ). The Seat Has A Front Water Fall Edge To Provide Popliteal Clearance For Comfortable Seating. It Also Has A Buttock Support Curve That Not Only Provides Rear Support But Also Prevents Small Children From Falling Through The Gap Between Seat And Back. Clean And Flat Surfaces Of Seat And Back Aids In Easy Maintenance. * Seat Size : 47.8 Cm (W) X 44.6 Cm (D) * Back Size : 41.6 Cm (W) X 23.0 Cm (H)Understructure Assembly Consshould Be Ts Of Connecting Beam And Leg Assembly Made Of M.S. E.R.W. Oblong Tube Of Size 7.5±0.03Cm X 2.5±0.03Cm X 0.2±0.016Cm Thk.The Welded Structure Assembly Should Bepowder Coated ( Dft 40-60 Microns ).The Leg Assembly Should Befitted With Shoes And Levellers In Nylon. The Leg Structure Should Bedesigned With Minimal Should Be A Of Contact Close To Ground Providing Easy Access For Cleaning Purposes. The Shoes Fitted To Leg Assembly Help In Aligning The Structure For Back To Back Arrangements. Levellers Take Cshould Beof Uneven Flooring.Connecting Beam Should Befitted With Snap Locking End Cap.Lt Also Aids In Side-By-Side Understructure Alignment . Armrest Assembly Consshould Be Ts Of Armrest Frame And Armrest Pad . The Armrest Frame Should Bemade Up Of Size 3.175±0.05Cm X 0.47±0.027Cm Thk Hr Steel And It Should Bepowder Coated ( Dft 40-60 Microns ). Armrest Pad Should Beinjection Molded In Nylon And Should Befitted Onto The Armrest Frame. Overall Dimensions Of Chair Seat Height - 44.1 Cm. Height - 78.5 Cm. Width & Depth Of Chair As- Width-169.5Cm And Depth-63.8 Cm. , Modular Workstation With Side Storage And With Sharing Partition*Second Floor Audit Dpt, Accounts, Pd/General Section & Legal Cell Workstation:Partition Size: 1500/1500 Mm L X 50Mm D X 1050Mm Ht. (T Type) Table Size: 1500Mm L X 600Mm D X 750Mm Ht. A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Modular Workstation With Side Storage And With L Type Partition *Second Floor Accounts, Pd/General Section & Legal Cell Workstation:Partition Size: A) 1500/1500Mm L X 50Mm D X 1050Mm Ht. (L Type)Table Size: 1500Mm L X 600Mm D X 750Mm Ht. A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Counter Table With Side Storage & With L Type Partition*Third Floor Superindent Counter Table: Modular Partition: 1500/1500Mm L X 50Mm D X 1050Mm Ht.Table Size : 1500Mm L X 750Mm D X 750Mm Ht.Side Storage Size : 900Mm L X 450Mm D X 750Mm Ht.) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Cabin Table With Side Storage-*Third Floor Deputy Secretary Office Table, Revenue Office Table, Pb, Cho-1,Hs-1 Cabin Table:) Table Size: 1800Mm L X 750Mm D X 750Mm Ht.Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. (Drawer And Open Storage)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Counter Table With Side Storage-*Third Floor It Work Station Table , Atndr At Deputy Secretary &Pb Cabin & Propery Tax Workstation:A)Table Size: 1500Mm L X 600Mm D X 750Mm Ht.Side Storage: 900Mm L X 450Mm D X 750Mm Httable Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Pedestal With Single Drawer And Shutter ( For Workstations)Size : 400Mm L X 450Mm D X 650Mm Ht.Made Of 18 Mm Thick Pre Laminated Particle Board With Telescopic Drawer Runners , Handle And Individual Lock. , 3Door Storage -Size: 1200Mm L X 400Mm D X 1200Mm Ht.Made Of 18Mm Thick Pre Laminated Board With Pvc Edge Binding, With Multipurpose Lock, D Handle And Box Hinges With Necessary Intermediate Vertical Supports Where Ever Necessary To Avoid Shelf Bending Issue. , Storage-Size : 1500Mm L X 450Mm D X 750Mm Ht. Made Of 18 Mm Thick Pre Laminated Board With Pvc Edge Binding, With Multipurpose Lock, D Handle And Box Hinges , Office Atndr Table Office Atndr Table-Third Floor Atndr Office Room Table 1Table Size : 4670Mm L X 500Mm D X 750Mm Ht. (3 Pieces Of 1560Mm Joined Together)A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Third Floor Atndr Office Room Table 2-Table Size : 1750Mm L X 500Mm D X 750Mm Ht.A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Third Floor Atndr Office Room Table 3 ( Revenue, Ri Office)Table Size : 2800Mm L X 500Mm D X 750Mm Ht ( 2 Pieces Of 1400Mm Joined Together)A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Third Floor Atndr Office Room Table 3 ( Property Tax)Table Size : 5580Mm L X 500Mm D X 750Mm Ht. (3 Pieces Of 1860Mm Joined Together)A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Third Floor Atndr Office Room Table 4( Revenue Non Tax)Table Size : 2500Mm L X 500Mm D X 750Mm Ht. (2 Pieces Of 1250Mm Joined Together)A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Third Floor Atndr Office Room Table 4( Revenue Non Tax) Table Size : 3600Mm L X 500Mm D X 750Mm Ht. (2 Pieces Of 1810Mm Joined Together)A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Cashier Counetr Table-Third Floor Waiting Area Cashier Counter Tabletable Size : 1200Mm L X 400Mm D X 750Mm Ht. A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Dinning Room Table- Table1 Size : 2400Mm L X 750Mm D X 750Mm Ht.)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Dinning Room Table-Table2size : 700Mm L X 700Mm D X 750Mm Ht.Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding , Providing, Supplying And Placing Of Waiting Chair. Seat Shell :The Seat Shell Should Bea Welded Assembly Of Seat,Back And Side Frame. The Seat And Back Should Bemade Of 0.12±0.013Cm Thk Cr Steel Sheet With Oblong Perforations.They Should Bewelded To Sideframe Of Size 3.2±0.05Cm X 0.5 ± 0.05 Cm Thk Hr Steel.The Welded Assembly Should Bepowder Coated ( Dft 40-60 Microns ). The Seat Has A Front Water Fall Edge To Provide Popliteal Clearance For Comfortable Seating. It Also Has A Buttock Support Curve That Not Only Provides Rear Support But Also Prevents Small Children From Falling Through The Gap Between Seat And Back. Clean And Flat Surfaces Of Seat And Back Aids In Easy Maintenance. * Seat Size : 47.8 Cm (W) X 44.6 Cm (D) * Back Size : 41.6 Cm (W) X 23.0 Cm (H)Understructure Assembly Consshould Be Ts Of Connecting Beam And Leg Assembly Made Of M.S. E.R.W. Oblong Tube Of Size 7.5±0.03Cm X 2.5±0.03Cm X 0.2±0.016Cm Thk.The Welded Structure Assembly Should Bepowder Coated ( Dft 40-60 Microns ).The Leg Assembly Should Befitted With Shoes And Levellers In Nylon. The Leg Structure Should Bedesigned With Minimal Should Be A Of Contact Close To Ground Providing Easy Access For Cleaning Purposes. The Shoes Fitted To Leg Assembly Help In Aligning The Structure For Back To Back Arrangements. Levellers Take Cshould Beof Uneven Flooring.Connecting Beam Should Befitted With Snap Locking End Cap.Lt Also Aids In Side-By-Side Understructure Alignment . Armrest Assembly Consshould Be Ts Of Armrest Frame And Armrest Pad . The Armrest Frame Should Bemade Up Of Size 3.175±0.05Cm X 0.47±0.027Cm Thk Hr Steel And It Should Bepowder Coated ( Dft 40-60 Microns ). Armrest Pad Should Beinjection Molded In Nylon And Should Befitted Onto The Armrest Frame. Overall Dimensions Of Chair Seat Height - 44.1 Cm. Height - 78.5 Cm. Width & Depth Of Chair As- Width-169.5Cm And Depth-63.8 Cm. , Mid Back Office Chair.Providing & Laying Revolving Chair With Arm Rest. The Seat And Back Cushion Of The Chairs Should Be Pressed On 12Mm Hot Press Moulded Ply The Seat Cushion Of The Chair Should Be Made Up Of 50Mm Thick High Density Of 45±2 Kg/M3 Polyurethane Mould And Back Cushion Should Be Made Up Of 38Mm Thick High Density 33±2 Kg/M3. The Polyurethane Foam Shall Be As Per Manufacturer’S Specification. The Hardness Of Foam Shall Be 20 Kg On Hampden Machine And 25% Compression And It Should Be Covered With Fabric As Per Manufacturer’S Shade Card .The Arms Of The Chairs Should Be Black. The Gas Lift Mechanism Should Be Tested As Per Bifma X 05.01.2002 Standards .The Pedestal Should Be Five Legged Injection Moulded In Black 30% Glass –Filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, Twin Wheel Castors Confirming To Bifma Standards X 05.01.2002 Tested To Perform 1,00,000 Cycles With 225 Lbs Load. It Should Have Synchro Single Point Locking Arrangement. (Note -The Back And Base Of Chair Should Be Supplied With Fabric Upholstered ) Overall Height Of Chair Should Be Minimum 970 Mm ( Inclusive Of Maximum Adjustment Of Gas Lift Mechanism ) , Visitor Chair - Model Smat Cantilever The Seat And Back Are Made Up Of 1.2 Cm Thick Hot Pressed Plywood, Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lipping All Around. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. Back Size: 49.0Cm.(W) X 47.0Cm.(H) Seat Size: 49.0Cm.(W) X 44.0Cm.(D). Polyurethane Foam: The Polyurethane Foam Is Moulded With Density = 45 +/-2 Kg/M3 And Hardness = 20 +/- 2 On Hampden Machine At 25% Compression. Tubular Frame: The Tubular Frame Is Cantilever Type & Made Of Dia.2.54Cm.(1”)X 14 Bg M.S. E.R.W. Tube And Black Powder Coated. , Providing, Supplying And Placing Of Boltless Shelving System Of Height 2100Mm, Length 1300Mm & Depth 500Mm With 6 Panels. Upright Is Roll-Formed Construction Made Up Of Single Piece Having Slots At 25Mm Pitch Upright Typeupright G50 Profile Width 50 Mm Profile Depth 37 Mm No Of Pieces Single Panel Adjustability 25 Mm Material Quality Min Ys=210 Mpa Mfg Process Roll Forming Finish Powder Coated Colour Oxford Blue Bracingis Formed Single Piece Section Which Connects Two Vertical Uprights & Makes A Frame Bracing Type Battened Type Section Flat With Edge Hem Bend And Middle Rib Material Thickness 1.2Mm Mfg Process Press Brake Forming Connectivity Hooking & Pin Assembly No Of Fasteners 2 Nos Of M6x10 Plastic Rivet Pin Surface Finish Galvanized Base Plate G50 Base Are Used To Transfer The Upright Load Into Ground & Also Act As A Connecting Member Between Ground & Upright. Width 64Mm Depth 60Mm Thickness 2.0Mm Connectivity Grouting No Of Anchor Bolt 1 No Of M8x51 Fastener Type Coach Bolt No Of Fasteners To Connect Upright 1 No Of M6x15 Fastener Type Hex. Bolt & Nut Mfg. Process Press Forming Finish Galvanized Shelf Panels Are The Load Carrying Members Which Are Hooked Into The Uprights Via Shelf Clips. ‘4’ Nos. Of Clips Are Used Per Panel. Width 1300 Mm In 50 Pitch. Depth 300 To 600Mm In 50 Pitch. Thickness 0.8 Mm Range Where Panel Cannot Be Offered Refer Shelf Panel Load Chart Height 32Mm No Of Bends 14 Sharp Edges No Sharp Edges Mfg. Process Roll Formed Usage Decking Surface Fasteners No Divider Adjustability 50Mm Mounting Using ‘4’ Nos. Of Shelf Clips Surface Finish Galvanized Shelf Clip Shelf Panels Are Mounted Using This Shelf Clips. Profile Section 70 X 17 X 12Mm Material Thickness 2.3Mm Mfg. Process Blanking & Punching No Of Bend 2 Connectivity Insertion Surface Finish Galvanized Back Ties Are The Critical Members In Ensuring Stability. Usage Stability Dia. Of Tie Rod 5Mm Size Of Turn Buckle 90Mm Connectivity – Tie Rod Cleat Hooking Fasteners ‘1’ No Of Plastic Rivet Pin / Cleat Mfg. Process – Tie Rod Bending Surface Finish Galvanized , Modular Workstation With Side Storage And With Sharing Partition*Second Floor Audit Dpt, Accounts, Pd/General Section & Legal Cell Workstation:Partition Size: 1500/1500 Mm L X 50Mm D X 1050Mm Ht. (T Type) Table Size: 1500Mm L X 600Mm D X 750Mm Ht. A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Modular Workstation With Side Storage And With L Type Partition *Second Floor Accounts, Pd/General Section & Legal Cell Workstation:Partition Size: A) 1500/1500Mm L X 50Mm D X 1050Mm Ht. (L Type)Table Size: 1500Mm L X 600Mm D X 750Mm Ht. A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Superindent Table With Side Storage And With L Type Partition *Fourth Floor Superindent Counter Table:Modular Partition: 1500/1500Mm L X 50Mm D X 1050Mm Ht.Table Size : 1800Mm L X 750Mm D X 750Mm Ht.A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Cabin Table With Side Storage- *Fourth Floor Supdt Engineer Cabin Table:Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding.*Fourth Floor Supdt Engineer Cabin Table:A) Table Size: 2100Mm L X 120Mm D X 750Mm Ht.Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. (Drawer And Open Storage) , *Fourth Floor Asst-Executive Engr 1&2 & Exe-Engr 1&2 Cabin Table:B)Table Size: 1800Mm L X 1200Mm D X 750Mm Ht. Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. (Drawer And Open Storage) , *Fouth Floor Asst-Engr 3,4&5 Cabin Table:D) Table Size: 1800Mm L X 71200Mm D X 750Mm Ht. Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. (Drawer And Open Storage) , *Fouth Floor Hd-1 & Hd-2 Cabin Table:E) Table Size: 1600Mm L X 750Mm D X 750Mm Ht. Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. (Drawer And Open Storage) , Pedestal With Single Drawer And Shutter ( For Workstations)Size : 400Mm L X 450Mm D X 650Mm Ht. Made Of 18 Mm Thick Pre Laminated Particle Board With Telescopic Drawer Runners , Handle And Individual Lock. , 3Door Storage -Size: 1200Mm L X 400Mm D X 1200Mm Ht.Made Of 18Mm Thick Pre Laminated Board With Pvc Edge Binding, With Multipurpose Lock, D Handle And Box Hinges With Necessary Intermediate Vertical Supports Where Ever Necessary To Avoid Shelf Bending Iss , Storage Size : 1500Mm L X 450Mm D X 750Mm Ht.Made Of 18 Mm Thick Pre Laminated Board With Pvc Edge Binding, With Multipurpose Lock, D Handle And Box Hinges , Conference Hall &Union Office Table With 02 Nos Of Pop Up Box ( 8 Module Without Switch &Socket)Size : 4800Mm L X 1200Mm D X 750Mm Ht. (2 Pieces Of 2400Mm Joined Together)* Table Top - Made Of 16Mm 710 Grade Plywood Finished With 1Mm Laminate (Wooden Suede) Edges In Double Thick Finished With 2Mm Thick Pvc Edge Binding Matching With The Laminate Shade.* Understructure – Box Type Legs Made Of 16 Mm 710 Grade Plywood Finished With 1Mm Laminate (Wooden Suede) , Town Planning Dept & Engineerind Dept. Atndr & Printer Counter Tabletable Size : 2000Mm L X 600Mm D X 750Mm Ht. A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Dinning Room Table Table Size : 1650Mm L X 700Mm D X 750Mm Ht. A)Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. B)Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Ee-Additional Secretaryroom:Supplying And Placing In Position Main Table,Eru & Pedestal Of The Following Specifications. 2100X2250x750 Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Soft Closing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. , Supplying And Placing In Position Main Table,Eru & Pedestal Of The Following Specifications. 2100X2250x750 Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Soft Closing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. , Providing And Supplying Of Encardo 3Str Dimensions W X H X D (Cm) - 179 X 85 X 83.5 Finish Color - Cappuccino Net Weight (Kg) - 85 Primary Material - Solid Wood Upholstery Material - Leatherette Seat Height (Cm) - 55 Warranty - 1 Year Style - Contemporary & Modern Delivery Condition - Knock Down , Providing And Supplying Of Encardo 2Str Dimensions W X H X D (Cm) - 125 X 85 X 83.5 Thickness Of Plywood Used(Mm) : 12 Mm Leg Material: * Material Of Leg : (Plastic / Insert Moulding / Wooden/ Ms + Chrome Plating / Ss) :-Wooden Hanlde Is The Leg Frame Material (Tropical Wood / Pine Wood/ Rubber Wood): Pine Wood Seat Height (Cm) - 47 Warranty - 1 Year , Exicutive High Backrevolving Chairproviding & Laying Revolving Chair With Arm Rest. The Seat And Back Cushion Of The Chairs Should Be Pressed On 12Mm Hot Press Moulded Ply The Seat Cushion Of The Chair Should Be Made Up Of 50Mm Thick High Density Of 45±2 Kg/M3 Polyurethane Mould And Back Cushion Should Be Made Up Of 38Mm Thick High Density 33±2 Kg/M3. The Polyurethane Foam Shall Be As Per Manufacturer’S Specification. The Hardness Of Foam Shall Be 20 Kg On Hampden Machine And 25% Compression And It Should Be Covered With Fabric As Per Manufacturer’S Shade Card .The Arms Of The Chairs Should Be Black. The Gas Lift Mechanism Should Be Tested As Per Bifma X 05.01.2002 Standards .The Pedestal Should Be Five Legged Injection Moulded In Black 30% Glass –Filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, Twin Wheel Castors Confirming To Bifma Standards X 05.01.2002 Tested To Perform 1,00,000 Cycles With 225 Lbs Load. It Should Have Synchro Single Point Locking Arrangement. (Note -The Back And Base Of Chair Should Be Supplied With Fabric Upholstered ) Overall Height Of Chair Should Be Minimum 970 Mm ( Inclusive Of Maximum Adjustment Of Gas Lift And Multifunctional Mechanism ) , Mid Back Office Chair.Providing & Laying Revolving Chair With Arm Rest. The Seat And Back Cushion Of The Chairs Should Be Pressed On 12Mm Hot Press Moulded Ply The Seat Cushion Of The Chair Should Be Made Up Of 50Mm Thick High Density Of 45±2 Kg/M3 Polyurethane Mould And Back Cushion Should Be Made Up Of 38Mm Thick High Density 33±2 Kg/M3. The Polyurethane Foam Shall Be As Per Manufacturer’S Specification. The Hardness Of Foam Shall Be 20 Kg On Hampden Machine And 25% Compression And It Should Be Covered With Fabric As Per Manufacturer’S Shade Card .The Arms Of The Chairs Should Be Black. The Gas Lift Mechanism Should Be Tested As Per Bifma X 05.01.2002 Standards .The Pedestal Should Be Five Legged Injection Moulded In Black 30% Glass –Filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, Twin Wheel Castors Confirming To Bifma Standards X 05.01.2002 Tested To Perform 1,00,000 Cycles With 225 Lbs Load. It Should Have Synchro Single Point Locking Arrangement. (Note -The Back And Base Of Chair Should Be Supplied With Fabric Upholstered ) Overall Height Of Chair Should Be Minimum 970 Mm ( Inclusive Of Maximum Adjustment Of Gas Lift Mechanism ) , Visitor Chair - Model Smat Cantilever The Seat And Back Are Made Up Of 1.2 Cm Thick Hot Pressed Plywood, Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lipping All Around. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. Back Size: 49.0Cm.(W) X 47.0Cm.(H) Seat Size: 49.0Cm.(W) X 44.0Cm.(D). Polyurethane Foam: The Polyurethane Foam Is Moulded With Density = 45 +/-2 Kg/M3 And Hardness = 20 +/- 2 On Hampden Machine At 25% Compression. Tubular Frame: The Tubular Frame Is Cantilever Type & Made Of Dia.2.54Cm.(1”)X 14 Bg M.S. E.R.W. Tube And Black Powder Coated. , Providing, Supplying And Placing Of Waiting Chair. Seat Shell :The Seat Shell Should Bea Welded Assembly Of Seat,Back And Side Frame. The Seat And Back Should Bemade Of 0.12±0.013Cm Thk Cr Steel Sheet With Oblong Perforations.They Should Bewelded To Sideframe Of Size 3.2±0.05Cm X 0.5 ± 0.05 Cm Thk Hr Steel.The Welded Assembly Should Bepowder Coated ( Dft 40-60 Microns ). , Providing, Supplying And Placing Of Mid Back Chair. Seat/Back Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. , Providing, Supplying And Placing Of Boltless Shelving System Of Height 2100Mm, Length 1300Mm & Depth 500Mm With 6 Panels. Upright Is Roll-Formed Construction Made Up Of Single Piece Having Slots At 25Mm Pitch Upright Typeupright G50 Profile Width 50 Mm Profile Depth 37 Mm No Of Pieces Single Panel Adjustability 25 Mm Material Quality Min Ys=210 Mpa Mfg Process Roll Forming Finish Powder Coated Colour Oxford Blue Bracingis Formed Single Piece Section Which Connects Two Vertical Uprights & Makes A Frame , Modular Workstation With Side Storage And With Sharing Partition*Second Floor Audit Dpt, Accounts, Pd/General Section & Legal Cell Workstation:Partition Size: 1500/1500 Mm L X 50Mm D X 1050Mm Ht. (T Type) Table Size: 1500Mm L X 600Mm D X 750Mm Ht. A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Modular Workstation With Side Storage And With L Type Partition *Second Floor Accounts, Pd/General Section & Legal Cell Workstation:Partition Size: A) 1500/1500Mm L X 50Mm D X 1050Mm Ht. (L Type)Table Size: 1500Mm L X 600Mm D X 750Mm Ht. A) Frame Is Made Up Of 50Mm Powder Coated Ms Sections With Necessary Slotting For Wiring Throughout The Height And The Width Of The Partition. It Also Consists Of Two Race Ways One At The Floor Level For Networking And Another Below The Table Top For Fixing Electrical Plug Points. Frame Will Be Covered With Elegant Powder Coated Aluminium Top & Side Trim.B) Tiles Are Made Up Of 9 Mm Mdf Boards (Fabric/Laminated Finish) And Are Fixed To The Framework Which Also Includes A Writing Board /Pin Up Board For Each Workstation.C) Worktop Made Up Of 25 Mm Pre-Laminated Particle Board With Pvc Edge Binding With Vertical Supports With 25Mm Thick Prelaminated Particle Board.D) Side Storage Top With 25Mm Thick Plb And The Rest Made Of 18Mm Thick Pre Laminated Particle Board With 2 Drawers On Top Withtelescopic Sliders, Handle And Individual Lock And Open Storage Below , Superintendent Table & Vehicle Cell Cabin Table With Side Storage Fifth Floor Superindent & Vehicle Cabin Table: Table Size : 1500Mm L X 750Mm D X 750Mm Ht. Side Storage Size : 900Mm L X 450Mm D X 750Mm Ht. * Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. * Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Cabin Table With Side Storage Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding.Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. *Fifth Floor Kudumbasree Meeting Room & Cabin Table:B)Table Size: 1500Mm L X 750Mm D X 750Mm Ht. Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. (Drawer And Open Storage) , Typing Pool Workstation Table Size: 1500Mm L X 750Mm D X 750Mm Ht. Side Table Cum Storage: 900Mm L X 450Mm D X 750Mm Ht. (Drawer And Open Storage) Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Planning Cell Atndr Table Table Size: 2300Mm L X 500Mm D X 750Mm Ht. Table Top - 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. Understructure – Legs Made Of 25Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Pedestal With Single Drawer And Shutter ( For Workstations) Size : 400Mm L X 450Mm D X 650Mm Ht.Made Of 18 Mm Thick Pre Laminated Particle Board With Telescopic Drawer Runners , Handle And Individual Lock. , 3Door Storage -Size: 1200Mm L X 400Mm D X 1200Mm Ht.Made Of 18Mm Thick Pre Laminated Board With Pvc Edge Binding, With Multipurpose Lock, D Handle And Box Hinges With Necessary Intermediate Vertical Supports Where Ever Necessary To Avoid Shelf Bending Iss , Storage Size : 1500Mm L X 450Mm D X 750Mm Ht.Made Of 18 Mm Thick Pre Laminated Board With Pvc Edge Binding, With Multipurpose Lock, D Handle And Box Hinges , Conference Table With 02 Nos Of Pop Up Box ( 8 Module Without Switch &Socket)Size : 4800Mm L X 1200Mm D X 750Mm Ht. (2 Pieces Of 2400Mm Joined Together) * Table Top - Made Of 16Mm 710 Grade Plywood Finished With 1Mm Laminate (Wooden Suede) Edges In Double , Dinning Room Table Tablesize : 700Mm L X 700Mm D X 750Mm Ht.. ) Table Top - 25Mm Thick Pre-Lam-Particle Board With Pvc Edge Binding. B)Understructure - Box Type Legs Made Of 25Mm Thick Pre Lam-Particle Board And Modesty & Side Credenza Made Of 18Mm Thick Pre Lam-Particle Board With Pvc Edge Binding. , Providing, Supplying And Placing Of Waiting Chair. Seat Shell :The Seat Shell Should Bea Welded Assembly Of Seat,Back And Side Frame. The Seat And Back Should Bemade Of 0.12±0.013Cm Thk Cr Steel Sheet With Oblong Perforations.They Should Bewelded To Sideframe Of Size 3.2±0.05Cm X 0.5 ± 0.05 Cm Thk Hr Steel.The Welded Assembly Should Bepowder Coated ( Dft 40-60 Microns ). The Seat Has A Front Water Fall Edge To Provide Popliteal Clearance For Comfortable Seating. It Also Has A Buttock Support Curve That Not Only Provides Rear Support But Also Prevents Small Children From Falling Through The Gap Between Seat And Back. Clean And Flat Surfaces Of Seat And Back Aids In Easy Maintenance. * Seat Size : 47.8 Cm (W) X 44.6 Cm (D) * Back Size : 41.6 Cm (W) X 23.0 Cm (H)Understructure Assembly Consshould Be Ts Of Connecting Beam And Leg Assembly Made Of M.S. E.R.W. Oblong Tube Of Size 7.5±0.03Cm X 2.5±0.03Cm X 0.2±0.016Cm Thk.The Welded Structure Assembly Should Bepowder Coated ( Dft 40-60 Microns ).The Leg Assembly Should Befitted With Shoes And Levellers In Nylon. The Leg Structure Should Bedesigned With Minimal Should Be A Of Contact Close To Ground Providing Easy Access For Cleaning Purposes. The Shoes Fitted To Leg Assembly Help In Aligning The Structure For Back To Back Arrangements. Levellers Take Cshould Beof Uneven Flooring.Connecting Beam Should Befitted With Snap Locking End Cap.Lt Also Aids In Side-By-Side Understructure Alignment . Armrest Assembly Consshould Be Ts Of Armrest Frame And Armrest Pad . The Armrest Frame Should Bemade Up Of Size 3.175±0.05Cm X 0.47±0.027Cm Thk Hr Steel And It Should Bepowder Coated ( Dft 40-60 Microns ). Armrest Pad Should Beinjection Molded In Nylon And Should Befitted Onto The Armrest Frame. Overall Dimensions Of Chair Seat Height - 44.1 Cm. Height - 78.5 Cm. Width & Depth Of Chair As- Width-169.5Cm And Depth-63.8 Cm. , Mid Back Office Chair.Providing & Laying Revolving Chair With Arm Rest. The Seat And Back Cushion Of The Chairs Should Be Pressed On 12Mm Hot Press Moulded Ply The Seat Cushion Of The Chair Should Be Made Up Of 50Mm Thick High Density Of 45±2 Kg/M3 Polyurethane Mould And Back Cushion Should Be Made Up Of 38Mm Thick High Density 33±2 Kg/M3. The Polyurethane Foam Shall Be As Per Manufacturer’S Specification. The Hardness Of Foam Shall Be 20 Kg On Hampden Machine And 25% Compression And It Should Be Covered With Fabric As Per Manufacturer’S Shade Card .The Arms Of The Chairs Should Be Black. The Gas Lift Mechanism Should Be Tested As Per Bifma X 05.01.2002 Standards .The Pedestal Should Be Five Legged Injection Moulded In Black 30% Glass –Filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, Twin Wheel Castors Confirming To Bifma Standards X 05.01.2002 Tested To Perform 1,00,000 Cycles With 225 Lbs Load. It Should Have Synchro Single Point Locking Arrangement. (Note -The Back And Base Of Chair Should Be Supplied With Fabric Upholstered ) Overall Height Of Chair Should Be Minimum 970 Mm ( Inclusive Of Maximum Adjustment Of Gas Lift Mechanism ) , Visitor Chair - Model Smat Cantilever The Seat And Back Are Made Up Of 1.2 Cm Thick Hot Pressed Plywood, Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lipping All Around. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. Back Size: 49.0Cm.(W) X 47.0Cm.(H) Seat Size: 49.0Cm.(W) X 44.0Cm.(D). Polyurethane Foam: The Polyurethane Foam Is Moulded With Density = 45 +/-2 Kg/M3 And Hardness = 20 +/- 2 On Hampden Machine At 25% Compression. Tubular Frame: The Tubular Frame Is Cantilever Type & Made Of Dia.2.54Cm.(1”)X 14 Bg M.S. E.R.W. Tube And Black Powder Coated.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 1
Maharashtra View Result →
Contract Date: Jan 16, 2026 Contract Value : 60.02 Lakh
Cooperative No of Bidders 29
22.
Housing Urban and Rular Development #7934793 AOC
Selection Of Agency For Comprehensive Maintenance And Operations Support For Integrated Command And Control Centre, Belagavi Smart City For 2 Years 6 Months - Warranty Support And License Of All Application Or Software Tools Or Products Provided For Entire Contract Period Of 30 Months (10 Qtrs) Duration.,Taking Insurance For Elements Covered Under Iccc, Dc, And Field Elements Till The Contract Period Of 30 Months (10 Qtrs) Duration.,Sip Line (10 Channels) With Ipbx System Provision Of 10 Sip Channels For Seamless Voice Communication, Complete Ippbx System Designed To Manage Sip Trunks, Extensions, Call Routing, And More, Complete Installation And Configuration Of Sip Lines And Ipbx System And Providing Ongoing Support For Sip Line And Ipbx System For 30 Months (10 Qtrs) Duration.,Dc/Dr -The Platform Should Be Designed To Ensure Business Continuity In Case Of Any Unforeseen Events, By Providing A Secure, Reliable, And Scalable Disaster Recovery Solution Hosted On A Public Cloud Infrastructure. The Platform Will Ensure That Critical Systems, Data, And Services Are Restored Quickly In The Event Of A Disaster, Minimizing Downtime And Service Disruption For 30 Months (10 Qtrs) Duration.,Supply Of Revenue Software For 20 Bus Shelters For Passenger Information System With 30 Months (10 Qtrs) Operation And Maintenance Support.,License Renewal Of Existing Biometric And Upgradation Of Biometric Device With Frm (Face Reading Machine) Software With 30 Months (10 Qtrs) Operation And Maintenance.,Network As A Service (Recurring Charges For 30 Months (10 Qtrs)) Provision Of Network Infrastructure, Management, And Support Through A Subscription-Based Model. The Service Will Be Delivered On A Recurring Basis For A Term Of 30 Months (10 Qtrs).,Information Security Management System (Isms) Implementation, Management, And Certification Of An Isms Based On Iso/Iec 27001 Standards, Including Ongoing Monitoring, Auditing, And Improvements To Ensure The Confidentiality, Integrity, And Availability Of Organizational Information. (For One Time ),Vapt Audit By Certified Stqc/Certain Empanelled Agencies Every Year Till The Contract Period Of 30 Months Every 6 Months And Ensure Closure Of Vapt Observations Immediately And Submission Of Compliance Report To Bscl.,Stqc Audit Of Iccc, Data Centre, Field Equipment And All Application Or Software Tools Or Products (For One Time ),Operation And Maintenance Of Dg Set And Fuelling Of The Dg Set Installed At Iccc Till The Contract Period Of 30 Months (10 Qtrs) And Operation And Maintenance Of Battery And Ups Of Iccc And Smart Pole.,Monthly Electricity Bill Payment To Hescom (Electricity Department) For Iccc Building Till The Contract Period Of 30 Months(10 Qtrs).,Manpower Requirement For Operation And Maintenance Of Iccc - 18 Nos As Per Annexure -K,Operation And Maintenance With Allied Accessories Of Smart Water Hardware Devices And Integration Of Those Devices With Iccc As Per Boq Items Mentioned In Annexure- J.,Operation And Maintenance Of Existing Of Project Management And Infrastructure Setup As Per Boq Items Mentioned In Annexure- I,Operation And Maintenance Of Existing Field Devices Of Emergency Services As Per Boq Items Mentioned In Annexure- H And Integration Through A Unified Iccc Platform.,Operation And Maintenance Of Existing Field Devices Of Access Point On Smart Pole And Bus Shelters As Per Boq Items Mentioned In Annexure -G And Integration Through A Unified Iccc Platform.,Operation And Maintenance Of Existing Field Devices Of Solid Waste Management (Swm) As Boq Items Mentioned In Annexure- F And Integration Through A Unified Iccc Platform.,Operation And Maintenance Of Existing Field Devices Of Smart Transport As Boq Items Mentioned In Annexure -E And Integration Through A Unified Iccc Platform.,Operation And Maintenance Of Smart Pole Components As Per Boq Items Mentioned In Annexure -D And Integration Of Those Components And Its Application With Iccc Platform.,Operation And Maintenance 22 Traffic Signal With Atcs (Adaptive Traffic Control System) Software As Per Boq Items Mentioned In Annexure -C. Integration Of Atcs Software With Iccc Platform.,Supply And Installation Of Gps Devices For Swm, Smart Transport And Emergency Control With Minimum Specifications Weight - Should Be Lightweight , Housing - Aluminum Or Fiber Case , Operational Temperature -25 To 70, Storage Temperature -40 To 80, Power Consumption - Less Than 1 W (60Ma To 100Ma), Backup Power -24 Hrs , Minimum. For 30 Months (10 Qtrs) Duration.,Supply Of Ticketing Tool And Backup Software With For 30 Months (10 Qtrs) Duration Operation And Maintenance.,Supply Of Vms And Video Analytics Software With 30 Months (10 Qtrs) Duration Operation And Maintenance All City Cameras Will Connect To Single Platform And Shall Manage Video Feeds For All Cctv Systems Required Under This Project Through Video Management System (Vms) Application Hosted At Command-And-Control Centre Or Sub-Command And Control Centre.,Supply Of Cloud Billing Management Software With 30 Months (10 Qtrs) Duration Operation And Maintenance For Smart Water Software Should Be Web-Based Application With Different User Login Credentials According To User Profile.,Supply Of One City One Mobile App With Citizen Awareness Including Supervisor Login With 30 Months Operation And Maintenance.,Supply Of Iccc Application (Including Domain Name, Sms Gateways Certificate, Email Gateway) With 30 Months (10 Qtrs) Duration Operation And Maintenance.,Operation And Maintenance Of Iccc Belagavi And Datacentre At Kmds, Rajajinagar, Bangalore As Per Boq Items Mentioned In Annexure A And Annexure B For 30 Months (10 Qtrs) Duration.
Contract Date: Ref. Documents Contract Value : 9.09 Crore
Government Departments No of Bidders 1
TenderDetail
Loading tenders