View Bid Results For Resistance Standard Tenders

We found 3320 Bid Results related to resistance standard tenders. You can find Contractor details who won resistance standard tenders along with contract details in Bid awards announcements section.

Filters
Stage
2252
701
367
Tender Publishing Platform
362
2958
State / UT
38
499
334
323
213
202
201
181
175
141
129
122
102
95
78
67
57
46
37
35
34
34
34
31
27
23
20
16
15
13
12
7
6
4
2
2
1
1
1
Contract Value
1225
569
1100
405
Publish Date
13
1
0
0
0
Sector
32
714
442
417
392
224
217
172
161
90
79
56
47
45
37
31
25
19
18
17
17
17
13
13
13
12
11
6
4
4
3
2
1
Ownership
7
1747
788
437
285
52
6
4
Within keyword
Active filters:
Showing 1–50 of 3320 tenders matching your filters
1.
Public Administrative Department #11482340 AOC
Tender For Provision Of Lighting Arrangement With Led Street Lights In Ward No -236 Kardampuri Under Shahdara (North) Zone.; 1 LED Street light fixture, powder coated pressure die cast aluminum body (System lumen efficacy ≥120 <135 lm/Watt)Supplying, installation, Testing & Commissioning of Street light LEDfixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driverefficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP66,IK-10, CRI >80, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III asper the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulatedcopper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall beas approved by Engineer-in-Charge as per requirement. (Thermalmanagemheat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).72 watt 2 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. (a)Upto 35 sq. mm 3 P/FHot press sheet mouldedcompound (SMC) fire retardant (Temp. resistance up to 200 C), IP 55 weather proof polebox of innerdimension 200x160x98mm (NS) complete with suitable arrangement for fixing of 2 nosof 6 to 32 amp single pole MCB & 63 Amp. Doublepole isolator (MCB/Isolator excluded) withneutral link duly shorting on DIN Channel with2 Nos of MS clamps with SS back plateofsuitable size with danger monogram property printed on the coveretc asreqd. asreqd. 4 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 x 1.5 sq. mm 5 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 6 Supply of XLPE insulated PVC Sheathed Al conductor armoured cable 1.1 KV grade conforming to IS-7098 of following size: (a)2x6 Sqmm 7 Supply of XLPE insulated PVC sheathed Al. Conductor Un-Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*6 sqmm 8 Supply and fixing of 32mm dia X 1 meter long G.I. Pipe (Medium Class) bracket for mounting of fluorescent/HPMV/HPSV Street Light fitting on pole including bending the pipe to the required shape , 2 nos 25mm X 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd 9 Providing and fixing of Stainless steel name plate of size 6×8 sq inch made of 20 gauge sheet including engraved name of area representative duly painted along with SS clamp nut bolt etc as required 10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10KA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(a)Single pole
Contract Date: Jun 30, 2026 Contract Value : 4.10 Lakh
Local Bodies No of Bidders 2
2.
Power #11480986 Price Bid
Tender for Replacement Of Damage/Defective Vcb Of 33 Kv Hospital Bay At 132 Kv Sub-Station, Bahraich, Providing And Fixing Of Various Material At 220 Kv Sub-Station, Bahraich & 132 Kv Sub-Station, Bhinga Under Etd Bahraich , Dismantling Of Damaged 36 Kv Vcb From 33 Kv Bay Including Opening Of Both Side Jumpers, Opening Of Cable Termination And Earthing Strips. This Work Also Includes Other Associated Work To Complete The Job Satisfactorily. , Safe Shifting Of Damaged 36 Kv Vcb And Other Materials From Work Site To Open Store A Directed By Engineer. , Modification Of Existing Foundation And Refabricating Of Auxiliary Structure Of Damaged 33 Kv Breaker As Per The Suitability Of New Breaker To Be Installed At 33 Kv Feeder. This Work Included Cutting And Bending Of Exiting Auxiliary Structure. Welding, Punching Holes In The Existing/ New Galvanized Angle Such That Modified Structure Should Be Able To Support The New Breaker. , Erection Of New 36 Kv Vcb On Existing Breaker Structure In Safe Way Including Modification Of Existing Structure And All Associated Work To Complete The Job Satisfactorily. , Jumpering Of New 36 Kv Vcb On Both Sides With 06 Nos. Panther Jumper If Requirement All Associated Work To Complete The Job Satisfactorily. , Cable Termination Of Vcb Including Ferrules, Cable Glands And All Associated Work To Complete The Job Along With Men, miscellaneous Consumable, T&P, Lug, Cable Gland, Ferrule Etc. Will Be Provided By Contractor At His Own Construction , Re-Earthing Of 36 Kv Circuit Breaker By Cutting Bending & Welding Of 50X6 Mm Ms Flat To Existing Riser Work Includes Checking Of Existing Nser Connectivity To Earthmate Painting Of Existing Riser Earth Flat With One Coat Of Red Oxide And Two Coat Of Black/Bus Green Enamel Paint Of Standard Make After Cleaning Of Strip/Angle For Rust/Dust Fire Including Cost Of Men Material And T&P As Per Direction Of Supervising Engineer To Complete The Job Satisfactorily , Repairing Of Operating Mechanism Of Old Vcb Of Bay Including Travel Measurement Of Moving Rod, Checking Of C.B. Contact Continuity, Dismantling Of Tie Rod Assembly, Cleaning & Greasing Of Its All Roller Pins And Its Re-Assembly. Rectification Of Problem In Electrical Circuit Including Aux. Contact Block, Checking Of Auto Operation Of Spring Charging Motor, Setting Of Limit Switches, Measurement Of Contact Resistance Of All The Poles Using Contact Resistance Meter. Measurement Of Closing & Tripping Time Of All The Poles With Help Of Digital Time Measurement Equipment, Checking Of Healthiness Of The Vacuum Interrupter By Using Vacuum Interrupter Tester And Finally Checking Of Opening & Closing Operation Of The Circuit Breaker On Remote And Local. , Safe Loading, Carriage And Unloading Of 33 Kv Vcb By Truck/Private Vehicle & Hydra From 132 Kv Sub-Station, Bhinga Approx. 40 Km. , Providing And Fixing Of 33 Kv Vcb Vaccume Interepter Suitable For 1600 Amp. (Siemens Make Vcb) As Per Sample At 132 Kv Sub-Station, Bhinga , Providing And Fixing Of Abb Motor Gear Set Of 33 Kv Vcb As Per Sample At 220 Kv Sub-Station, Bahraich
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
3.
Defence #11478095 Technical Bid
Tender For Provision Of Certain Revenue And Minor Work At Age B/R Ii Under Ge(N) Patiala=- 1 Dismantling, Floor, Hearth Or Wall Tiling Including Cm (Bedding (But Not Backing), Removing Serviceable Tiles To Store & Rubbish Off The Premises Complete All As Specified And Directed 2 M&L For Single Charge, Vitrified, Stain & Scratch Resistant, Premium Quality Coloured Tiles Area Of Each Tiles Exceeding 0.42 Sqm But Not Exceeding 1.00 Sqm, In Floors Etc Mm And 8-10 Mm Thick, In Any Pattern Of Light & Dark Tiles As Approved, Laid Over 15 Mm Thick Screed In Cm (1:6) Epoxy Cartridge Tile Grout Using Filling The Joint Of Tiles Complete All As Specified.Note- Epoxy Black,Golden Colour,Complete All As Specified And Directed. 3 All As Per Item No 2 Above But As In Skirting Over 10 Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed. 4 M&L For Ceramic Glossy Finish, Joint Free Premium Quality Coloured Tiles 600 X 300 Mm And 8-9 Mm Thick, In Any Pattern Of Light & Dark/Highlighters Tiles Etc As Approved, On Vertical Surfaces Such As In Skirting/Dado Etc, Set And Including 10 Mm Thick Rendering In Cement Mortar (1:4) And Pointed In White Cement With Pigment To Match The Colour Of Tiles Complete All As Specified. 5 M & L For 15 Mm Thick Artificial Granite (Of Any Type) Work Steps, Jambs, Pillars, Window- Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite. Including Screed Bed Or Bedding Layer Of Mortar 20 Mm Thick For Laying Floor Finishes Complete All As Specified. 6 Providing And Laying Premium (1St) Quality Straight Edge, Ceramic Tiles Exterior Grade Scratch Resistance Of Size 300X300X7 To 8 Mm Thick In Floors Etc. In Any Shade And Design/Pattern Of Light & Dark Tiles Etc Set And Including 15 Mm Thick Rendering In Cement Mortar (1:6) And Pointed In White Cement With Pigment To Match Complete All As Specified. 7 Taking Up Or Down Existing Steel Tubing And Connections, 15Mm Bore Complete All As Specified. 8 S&F For Cpvc Pipe Fixed On Wall/Ceiling Or Laying In Floor Of 15Mm Bore Incl Fittings Complete All As Specified And Directed. 9 Taking Up Or Down Existing Steel Tubing And Connections, 20Mm Bore Complete All As Specified. 10 S&F For Cpvc Pipe Fixed On Wall/Ceiling Or Laying In Floor Of 20Mm Bore Incl Fittings Complete All As Specified And Directed. 11 S&F In Repair Angle Stop Cock With Wall Flange 15Mm Cast Copper Alloy, Screwed For Iron Pipe Or For Brass Ferrule Long Body.Make: Jaquar Cat Part No-Fon-40053Pm Or Equivalent In /Hindware/Kohlar. 12 S&F In Repair 15 Mm Bore Bib Cock With Wall Flange, Cast Copper Alloy, Chromium Plated, Fancy Type With Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Long Body.Make: Jaquar Cat Part No Opp-15037Pm Or Equivalent In/Hindware/Kohlar. 13 S&Fin Repair Brass Chromium Plated Basin Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe Of 15Mm Bore All As Specified And As Directed. Make: Jaquar Cat Part No Orp-10011Bpm Or Equivalent In /Hindware/Kohlar 14 S&F In Repair 15Mm Cp Connection 600Mm Long Including Washer And Brass Nuts All As Specified. 15 S&F In Repair Europen Wc China Ware Coloured Cascade With Cistern And Complete Fitting.Make: Jaquar/Hindware/Kohlar 16 S&F In Repair Counter Top Wash Basin Of Size 600 X465Mm With Wash Basin Cabinet Size 600X455X600Mm Including Bottle Trap , Brass Waste Fitting Complete All As Specified. Make:-Cera/Hindware/Jaguar 17 S&F In Repair Toilet Roll Holder Stainless Steel Flap All As Specified. Make- Jaquar Cat Part No Can-1153S Or Equivalent In /Hindware/Kohlar 18 S&F In Repair Towelrack 600Mm Long With Lower Hanger (Stainless Steel) All As Specified.(Make: Jaquar Cat Part No Acn -1181S Or Equivalent In /Hindware/Kohlar 19 S&F In Repair Soap Dispenser With Glass Bottle (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Acn -1135N As Equivalent /Hindware/Kohlar 20 S&F In Repair Soap Dish Holder With Glass (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Akp -35731P Or Equivalent In /Hindware/Kohlar 21 S&Fin Repair Towel Ring Square With Round Flange (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Acn -1121N Or Equivalent In /Hindware/Kohlar 22 S&F In Repair Healthfaucet With 1Mtr Long Easy Flex Tube In Chrome Finish And Wall Hook Of 15 Mm Bore With Cp Pipe Complete Set Of Make -Jaquar Cat Part No Ald - 565 Or Equivalent In Parryware/Prayag 23 S&F In Repair Looking Mirror 5Mm Thick Size 3.5X3.5 Feet Incl Stud And Fastners Complete All As Specified And Directed. 24 S&F In Double Arm Wall Mounted Reversible Plain/Magnifying (X3) Pivotal Mirror All As Specified. Jaquar Cat Part No Acn -1193N Or Equivalent In /Hindware/Kohlar 25 S&F In Repair Glass Shelf Corner With Bracket Of Size 225Mm X 225Mm Thickness Of Glass 6Mm) With Cp Brass Railing And Brass Screws.Make- Jaquar Cat Part No Acn -1173 Or Equivalent In /Hindware/Kohlar 26 S&F Grating Doom 125Mm Of Ptmt. 27 S & F In Repair Vitreous China Urinal Half Stall Type White (Excluding Flushing Cistern ) Including Waste Fitting, Waste Pipe Complete All As Specified.Make-Jaquar/Hindware/Kohlar 28 S&F Ms Work In Tubular/Pipe/Angle Sections For Frame Work For Roof, Vertical Poles, Rafters And Purlins Including Washer Etc Complete All As Directed. 29 S & F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall,Fixed With Self Tapping Screws As Specified. ( Design Of Sheet As Mangalore Tiles Pattern In Red Colour ). 30 S & F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall,Fixed With Self Tapping Screws As Specified. 31 M & L Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Incl Preparation Of New Surfaces Of Any Description Over 10 Cm Width Or Girth Complete All As Specified And As Directed. 32 M&L 25Mm Thick Factory Made Coloured Interlocking Designer Polished Floor Tiles (Ultra Pattern) Of Grade M-35 Of Shape And Size As Directed,And 100Mm X 100Mm Size Tiles Piece On Every Joint Of Tiles Flooring Laid Over & Including 20Mm Thick Screed Bed In Cement Mortar 1:4 Complete All As Specified And Directed . Note: Sample Shall Be Got Approved From Ge Before Commencement Of Work 33 S&F In Repair Stainless Steel Drapery Rod Of 20 Mm Inner Dia (In Lengths As Directed) Of & Including Decorative Finial At Both Ends And Pair Of S S Steel Brackets Fixed At Both Ends With Pvc Rawl Plug & Steel Screws On Walls/Beam, (Victorian Design)All As Specified & As Directed. Make -Sample Can Be Seen In The Office Of Engg-In-Charge For Checking And Quoting The Same 34 Demolition Of Cement Concrete Un -Reinforced In Ground Floors And Pavings N.Exc 15Cm Thickness Complete All As Specified. 35 M& L For 25Mm Thick Pcc 1:2:4 Type Bo Using 12.5 Mm Graded Stone Aggregate As In Floor Complete As Specified And Directed. 36 S & F 75 Mm Dia Pvc ( Swr ) Floor Trap, Plain With Grating Including Jointing With Solvent Cement Complete All As Specified. 37 S & F Floor Door Stopper Of Aluminium Alloy And Tongue, Anodised With Hard Drawn Steel Overall Length Of Cover Plate 140Mm.As In Repairs Complete All As Specified. 38 Dismantling Of Wall And Ceiling Board(Fiblre, Pulp, Insulation Etc) Any Thickness Including Cover Fillets Complete All As Specified And As Directed. 39 S & F Powder Coated Aluminum Alloy Interlocking Snap Grid Frame Work For False Ceiling Size 600Mm X 600Mm Consists Of Main Tee Runners Of Size 38Mm X 38Mm X 1.5Mm And Cross Tee Of Size 38Mm X 38Mm X 1.5Mm, Spaced Between The Main Tee At 600Mm Centre To Centre To Form A Grid Of 600Mm X 600Mm Complete All As Specified And As Directed And As Per Manufacturer. Instruction. 40 M & L For 4Mm Thick Non Asbestos Fibre Cement Building Boards Of Make E Board Classic Designer Board (Cascade Or Occenic) Of M/S Everest Industries Ltd Or Equivalent As Approved, By Ge Fixed Or Laid/ Inserted To Timber/Gi/Aluminium Framework With Complete All As Specified And As Directed. 41 Taking Down Cement Mortar Plastering On Brick Or Stone Walls, Etc. Including Raking Out Joints,Hacking For Key,Scrubbing Down With Water, Etc Complete All As Specified And As Directed. 42 M&L For Rendering 15Mm (In Two Layers 10Mm+5Mm) Thick Plaster In Cm (1:4) On Faces Of Brick Work Or Concrete Surfaces, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 43 M&L For Rendering 5Mm Thick Plaster In Cm (1:3) On Faces Of Brick Work Or Concrete On Surfaces Of Ceiling, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 44 Complete Removal Of Existing Treatment Including Washing Rubbing Down And Stopping Of Painted Surfaces And Applying 1-2 Mm Thick Metallic Texture Painting (Top Quality) On Walls In Any Colour/Shade/Pattern/Design Including Preperatory Work For Base By Applying Primer/Putty Coat By Any Authorised Applicator Complete All As Specified And Directed 45 M&L For New Plaster Surfaces And Applying 1-2 Mm Thick Metallic Texture Painting (Top Quality) On Walls In Any Colour/Shade/Pattern/Design Including Preperatory Work For Base By Applying Primer/Putty Coat By Any Authorised Applicator Complete All As Specified And Directed 46 M&L For Preparing New Plastered Or Unplastered Surfaces Of Ceiling, And Applying Three Coats Of White Wash Complete All As Specified And Directed. 47 M & L For Cement Concrete As Pcc 1:5:10 Type E-2 Using (40Mm Graded Stone Aggregate) As Foundations,Filling And Mass Concrete Complete All As Specified. 48 M&L For 75 Mm Thick Pcc 1:3:6 Type C-1 (Using 20Mm Graded Stone Aggregate) As In Plinth Protection/Floors Complete All As Specified And Directed. 49 Demolition Of Brick Work Or Stone/Boulder Masonary, Laid In Cement Mortar Or Cement Lime Mortar Complete All As Specified. 50 M&L Brick Work, Straight Or Curved On Plan N.Exc 6M Mean Radius In Cm 1:6 Using Old Size Brick Complete All As Specified. 51 Taking Down Chowkat Or Frame With Shutters (With Out Taking Off Shutter From The Frame ) Not Exceeding 1.5 Sqm Each As Directed By Engineer-In-Charge. 52 S&F For Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Door Frames/Chowkhat Comprising Of 100 Mm X 65 Mm Size, Applying Pvc Solvent Cement And Screwed With Full Body Threaded, Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg/Cum And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/Moisture Proof And Fire Retardant And Fixed In Position With Mild Steel Hold Fast/Lugs/Ss Dash Fasteners Of Required Dia And Length Complete All As Specified And As Directed By Engr-In-Charge. 53 S&F 28-30 Mm Thick Moulded Wpc Factory Made 100% Solid Door (Conforming As Per Is-4020) Made From 100% Lead Free Single Extruded With 2, 4 Or 6 Raised Panel Design On The Front Side With 10 Mm Deep Mould On Single Side With Wood Grain Texture And Back Side Palin With Density Not Less Than 600 Kg/Cum. Manufactured By An Iso : 9001-2015 Certified Company. The Door Should Be Water Proof, Termite Proof, Fire Etardant And Having Screw Holding Capacity Complete All As Specified 54 S&F Stainless Steel (304 Grade) Finished Butt Hinges 125Mm Complete All As Specified And Directed 55 S & F Extruded Brass Handles, Fabricated Type Polished 150 Mm Complete All As Specified. 56 S & F Brass , Barrel Tower Bolts, With Cast Or Sheet Barrel And Rolled Or Cast Bolts And Fixed 200 Mm Complete All As Specified. 57 M&L For 250Mm Long Brass, Sliding Door Bolt Withsand Or Die-Cast Brass Hasp, Staple (Bolt Type) And Fixing Bolt With Rolled Or Drawn Brass Bolts And Fixed Complete All As Specified And As Directed. 58 Dismantling Pvc Pipes With Fittings Upto 75Mm To 110Mm Dia Complete All As Specified And Directed By Engr-In Charge.. 59 S&F For Pvc (Swr) Pipe 110 Mm Dia Single Socketed In Any Length With Rubber Ring Jointed Level Fixed To Walls Complete All As Specified And As Directed. 60 S&F For Pvc (Swr) Pipe 75 Mm Dia Single Socketed In Any Length With Rubber Ring Jointed Level Fixed To Walls Complete All As Specified And As Directed. 61 S&F For Pvc (Swr) Bends With Access Door 110 Mm Dia Complete All As Specified And As Directed. 62 All As Per Item No 61 Above But 75 Mm Dia. 63 S&F Pvc (Swr) Plain Bend 110 Mm Dia Complete All As Specified And As Directed. 64 S&F Pvc (Swr) Plain Bend 75 Mm Dia Complete All As Specified And As Directed. 65 S&F Pvc (Swr) Branch Piece Single Or Double T Equal Or Unequal With Access Door 110 Mm Dia Complete All As Specified And As Directed. 66 All As Per Item No 65 But 75 Mm Dia. 67 S&F Pvc (Swr) Vent Cowl 110 Mm Dia Complete All As Specified And As Directed. 68 Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering, And Removing Surplus Soil To A Distance N Exc 50 M And Making Good Surface 69 M&L For Cutting Chases, Pinning In, Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc. And Making Good, Cutting Not Exc 10 Cm Girth All As Specified. 70 Taking Down Carefully Existing Points Wiring On Surface Conduit/Concealed Conduit Including Conduit From Surface And Expect Conduit In Concealed Wiring For Light/Fan/Socket/Power/Bell From Wall & Roof Along With Fitting And Fixtures Such As Switches, Sockets, Ceiling Roses, Batten Holders, Unserviceable Light Fittings, Pieces Of Wires, Gutties, Conduit, Wooden Boards Etc Removing Materials To Store For Keeping In Safe Custody Of Contractor For Which The Credit Has Been Considered Under Schedule Of Credit And Making Good The Disturbed Portion Of All Floor, Ceiling Etc All As Specified And Directed. 71 M & L For Point Wiring With 1.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Conductor For One Light/Fan/Bell Point In And Including New Pvc Rigid Non Metallic Concealed Conduit 19/20 Mm Dia, Medium Duty, Isi Marked To Be Terminated In Pressed Steel Terminal Boxes With Pvc Modular Top Cover Plates Of Suitable Size For Mounting Of Modular Type Switches/Sockets/Regulators Including 1.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Earth Continuity Conductor Controlled By One Switch And/Or One Regulator Complete Including Cutting Chases And Making Good The Surfaces In Cm 1:3 And Finishing The Surface As Per Existing Treatment All As Specified And Directed By Engr-In-Charge.Notes: (I) Cost Of Pressed Steel Terminal Boxes And Modular Top Cover Plate Shall Be Included In Point Wiring. (Ii) Wiring Shall Be Done As Per Colour Code In Is For Phase, Neutral And Earth.(Iii) -Cost Of Eye/Bottle Thimbles Used For Connection In Switches/Sockets & Mcbs In Dbs Shall Deemed To Be Included In The Unit Rate Quoted For This Item. 72 All As Per Sl Item No 71.00 Above Herein Before But One Socket Out Let 5 Pins 5 Amp On The Same Board With Other Switches Complete All As Specified And Directed. 73 All As Per Sl Item No 71.00 Above Herein Before But For One Socket Out Let 5 Pins 5 Amp On Independent Board Complete All As Specified And Directed. 74 All As Per Item No71.00 Herein Before But 2.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Conductor Incl 2.5 Sqmm Pvc Insulated And Unsheathed Frlsh Copper Earth Wire For Switch Socket Combination 3 Pin 15 Amps On Independent Board. 75 S & F In Replacement Of Modular Switch 1 Way, 6 Amps, 1 Module, 230 Volts Complete All As Specified. 76 S & F In Replacement Of Modular Switch 1 Way, 16 Amps, 1 Module, 230 Volts Complete All As Specified. 77 S & F In Replacement Of Modular Socket 5 Pin 6 Amps, 2 Module 230 Volts Complete All As Specified. 78 S & F In Replacement Of Modular Socket 5 Pin 6 &16 Amps, Combination Type 2 Module Complete All As Specified. 79 S & F In Replacement Of Modular Fan Regulator Step Type, 120 Watts, 2 Module Complete Fixed As In Repair All As Specified. 80 S & F In Replacement Of Ceiling Rose Surface Bakelite Surface 65 X 50Mm 3 Terminals All As Specified & Directed 81 Supply And Fix Incl Taking Down Deco Mini Energy Efficient 0.5 Watt B22 Base Led Bulb Green Colour With Colour Temperature 6500 Kelvin, Controller Type Push Button , Globe Shape For Indoor/ Outdoor Usage All As Specified And Directed By Engr In Charge. 82 Supply And Fix Incl Taking Down Deco Mini Energy Efficient 0.5 Watt B22 Base Led Bulb Red Colour With Colour Temperature 6500 Kelvin, Controller Type Push Button , Globe Shape For Indoor/ Outdoor Usage All As Specified And Directed By Engr In Charge. 83 Supply And Fix Surface/Recess Mounted Led Luminaire 36 Watt Cool White 4000-5000K Suitable For Gridd Celling Cutout Dimensions: 2X2 Ft. Incl Connecting With Twin Core Copper Wire From Ceiling Rose To Fitting, Fixture Size: (Lxwxh) In (595X595X65) Mm Incl Lamp And Driver All As Specified & Directed. 84 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 18/20W 6500K Of Capacity ,20 Watt,4 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 85 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 9/10W 6500K Of Capacity ,10 Watt,2 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 86 Supply And Fix Mirror Light With Linear & Compact 12 W Mirror Light With Decorative Grey End Caps, Polycarbonate Body And Ribbed Opal Diffuser Of Capacity 9 Watt Complete All As Specified And Directed By Engr-In-Charge. 87 M & L For Sub Main Wiring With Two Single Core 4.0 Sqmm Pvc Insulated And Unsheathed Frlsh ,Stranded Copper Conductor Cable Drawn Through Pvc Concealed Conduit 25 Mm Dia Including 4 Sqmm Pvc Insulated Unsheathed Frlsh Stranded Copper Conductor Cable As Earth Wire All As Specified And Directed By Engineer-In-Charge. Note 1:- 2 Runs Of 4.00 Sqmm Copper Conductor Cable, 1 Run Of Pvc Conduit & 1 Run Of 4.00 Sqm Copper Conductor Earth Wire Shall Be Measured As One Unit) Note2 : Rate Quoted For This Items Shall Be Inclusive Of The Cost Of (I) Rigid Non-Metallic Pvc Conduit Of 25 Mm Dia With Tees, Bends, Elbows, Reducers, Bell Mouth Tube Ends And Fixing Accessories Such As Couplers, Lock Nuts, Saddles, Pipe Hooks Etc. (Ii) Cutting Chases, Pinning In Making Good To Facing Where Required And Pointing In Cement Mortar 1:3 To Match The Existing Surfaces, Cutting Not Exc. 10 Cm Girth . (Iii) Taking Out/Down Existing Unserviceable Sub Main Wiring. 88 Taking Down And Refixing Of Ceiling Fan After Supply And Replacement Of Rubber Reel, Round Cover Plate Of Size 6 Inch Of Ceiling Fan Complete With Ms Split Clamp Two Nos, Nuts And Bolts Complete All As Specified And Directed By Engr-In-Charge. 89 Supply And Fix Exhaust Fan Ac Single Phase 230/240 V Of Size 250 Mm Sweep 900 Rpm Engineering Thermoplastic Body, High Efficiency Motor, Dynamically Balanced Blade For Better Performance And Corrosion-Resistant Powder Coated Metallic Finish Including Louver Complete All As Specified And Directed By Engineer-In-Charge. 90 Material And Labour For Making Hole Of Suitable Size For Exhaust Fan 250 Mm/ 300Mm Sweep In Wall For Grouting And Making Good The Surface Complete All As Specified And Directed By Engr-In-Charge. 91 Supply And Fixing Single Pole And Neutral Enclosure With A Two Pin And Earth Plug And Socket Complete With Mcb Spn 32 Amps, Complete All As Specified And As Directed By Engineer-In-Charge. 92 S&F Poly Coated Gi Frame Work As In Grid For False Ceiling Comprising Of Protected Gi Perimeter Channel 0.55 Mm Thick With Two Unequal Flanges Of 20 And 30Mm And Web Of 27Mm Fixed To Surrounding Wall Using Nylon Sleves And Screws At 450Mm Centre To Centre/Intermediate Chaqnnel 0.9Mm Thick Having To Equal Flanges Of 15Mm Each And Web Of 45 Mm Suspended From Soffit And Approx 900Mm Centre To Centre With Gi Cleat And Steel Expansion Fasterners With And Including Ceiling Section (Not Exc 1.2 Metre Length) Of 0.55Mm Thickness Having Kurled Web Of 50Mm And Flange Of 26Mm Each With Lips Of 10.5Mm Fixed To The Intermediate Channel With Connecting Clips Acorss The Intermediate Channel At 457Mm Centre To Centre And Hangers 6Mm Dia Gi (Upto 1200 Mm Length Adjusting Level Fixed To Roof Slabs By Means Of Ceiling Cleats Made Out Of Gi Flat 40 X3Mm Size 60Mm Long Complete With And Including 7Mm Thick Pvc Laminated Gypsum Tiles Of Size 595X595Mm Complete All As Specified & Directed 93 M&L For Complete Removal Of Existing Surfaces Of Walls Including Cornices, Pillasters Etc, And Applying Two Coats Of Obd Over And Incl A Coat Of Interior Wall Primer Over Wall Care Putty Complete All As Specified And Directed. 94 M&L For Complete Removal Of Existing Treatment On Walls And Applying 02 Coats Of Exterior Weather Emulsion Paint To External Walls/Rcc Surfaces/Soffits Of Chajjas/Roof Projections/Cantilevers/Balcony Etc Surfaces Over & Including A Coat Of Exterior Wall Primer And Over Wall Care Putty Complete All As Specified. 95 S&F Stainless Steel Tubing Of 25 Mm Dia Chromium Plated Min. 1.0 Mm Wall Thickness As In Curtain Rod Complete Incl S&F 02 Nos Stainless Steel Brackets/Finials Fency Type, Stops Fixed With Ss Screws Etc All As Specified & Directed.Note : For The Purpose Of Mesurement And Payment Running Length Of Curtain Rod Only Shall Be Considered. 96 Taking Down Chowkhats Or Frames Of Any Description Exc 1.5 Sqm And N. Exc. 4 Sqm Each (Without Taking Off Shutters From The Frame) Including Cutting Hole To Size For Receive Fresh Pcc Of Hold Fast And Making Good The Disturbed Surface Same Complete All As Specified And Directed. 97 S&F Factory Made Pressed Steel Frames Made Of Ms Sheet Of 1.20 Mm Thickness For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete As Specified,Size 125X60Mm 98 M&L Pcc 1:3:6 Type C-0 In 12.5 Mm Graded Stone Aggregates Hold Fast Fillinng Inside Frame & Hold Fasts Etc Complete All As Specified 99 S&F Factory Made Flush Shutters 35Mm Thick Ply Construction, Bwp Confirming To Is 2202, Solid Core Construction, With Block Board Core And Plywood Face Panels Commercial Type On Both Sides With 6Mm Thick Lipping Frame To Match Including Supply And Fixing Following Items :(A) Mild Steel Butt Hinges 125Mm - 3 Nos. Per Leaf(B) Stainless Steel (304 Grade) Finished Tower Bolt 200Mm Long - 2 Nos Per Leaf(C) Stainless Steel (304 Grade) Finished Handles 150 Mm - 2 Nos. Per Leaf(D) Stainless Steel (804 Grade) Finished Sliding Bolt 250 Mm - 1 No. Per Leaf(E) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos. Per Leaf. 100 S&F 35Mm Thick Glazed And Skelton Shutters Of 2Nd Class Hard Wood (Factory Made) Open Rebated And Divided To Receive Glass, Gauze Etc (Without Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc Size Of Members Of Shutter As Specified In Ssr-91 Pt-1 Section 8 Clause 8.20(A), Kiln Seasoned And Chemically Pressure Treated All As Specified Including Stainless Steel 304 Grade Wire Cloth (0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm) All As Specified And Including Supply And Fixing Following Items :(A) Stainless Steel (304 Grade) Finished Butt Hinges 125Mm - 3 Nos Per Leaf(B) Stainless Steel (304 Grade) Finished Tower Bolt 200Mm Long - 2 Nos Per Leaf(C) Stainless Steel (304 Grade) Finished Handles 150 Mm - 2 Nos Per Leaf(D) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16X250Mm - 1 No Per Leaf (E) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos. Per Leaf. 101 M&L For Two Coat Of Synthetic Enamel Paint (Finishing Coat) Over One Coat Of Pink Primer To New Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Incl Prepration Of Surfaces Complete All As Specified And Directed. 102 S&F 300Mm, Ordinary Rat Tail Rod Pattern Springs Including Roller And Roller Plate Complete All As Specified And Directed. 103 S & F In Replacement Of Ceiling Rose Surface Bakelite Surface 65 X 50Mm 3 Terminals All As Specified & Directed 104 S & F In Replacement Of New Generation Energy Saving And Environmental Friendly Long Life Led Building Security Light 1X35 Watts Made Up Of Pressure Die Cast Alluminium Housing With High Power Led As Light Source And Lense Embedded Pc Cover Having Top Opening Separate Driver Compartment With Ip65 Protection And Impact Resistance Of Ik07, With All Accessories Including Suitable Bracket With 32Mm Bore Light Grade Gi Pipe Bemd To Shape, Including Ms Clamp Of Size Of Required Size And Pvc Cable 1.5 Sqmm Twincore From Ceiling Rose To Light Fittings Complete All As Specified And Directed By Engineer-In-Charge. 105 S & F In Replacement Of Surface Mounted Led Bulk Head Luminaire Of Capacity 10 Watt With Abs Body & Polycarbonate Diffuser, Ip54 Inc Connection With ,With Flexible Wire 0.5 Sqmm Copper Cable All As Specified & Directed By Engr-In-Charge. 106 Supply And Fix Lamp Holder Including Led Bulb 9 W Including Flexible Wire 0.5 Sqmm Copper Cable All As Specified & Directed By Engr-In-Charge. 107 M & L For Sub Main Wiring With Two Single Core 6.0 Sqmm Pvc Insulated And Unsheathed Frlsh ,Stranded Copper Conductor Cable Drawn Through Pvc Concealed Conduit 25 Mm Dia Including 6.0 Sqmm Pvc Insulated Unsheathed Frlsh Stranded Copper Conductor Cable As Earth Wire All As Specified And Directed By Engineer-In-Charge. Note 1:- 2(Two) Runs Of 6.00 Sqmm Copper Conductor Cable, 1 Run Of Pvc Conduit & 1 Run Of 6.00 Sqmm Copper Conductor Earth Wire Shall Be Measured As One Unit) Note 2 :(I) Rate Quoted For This Items Shall Be Inclusive Of The Cost Of (I) Rigid Non-Metallic Pvc Conduit Of 25 Mm Dia With Tees, Elbows, Reducers, Bell Mouth Tube Ends And Fixing Accessories Such As Couplers, Lock Nuts, Saddles, Pipe Hooks Etc. (Ii) Cutting Chases, Pinning In Making Good To Facing Where Required And Pointing In Cement Mortar 1:3 To Match The Existing Surfaces And Cutting Not Exc. 10 Cm Girth . (Iii) Including Taking Out/Down Existing Unserviceable Sub Main Wiring. 108 S & F In Replacement Of Sheet Metal Enclosure Db Tpn 4 Ways Double Door 415 Volts With 200 Amps Standard Bus Bar Of Suitable Size And Common Neutral Link Flush Mounting Type, Drilling Holes For Incoming And Out Going Cables Complete With Ip-43 Protection Complete All As Specified And Directed By Engr-In-Charge 109 S & F In Replacement Of Mcb, Triple Pole & Neutral (Tpn) 10 Ka 240 Volts 40 To 63 Amp Capacity Fixing In Db’S Complete All As Specified And Directed. (Note: Mcb Should Be B Or C Curve As Directed By Engineer In Charge) 110 Supply And Fix In Replacement Of Sheet Metal Enclosure 8 Ways Double Door For Dbs When Mcbs Are To Be Used 240,Volts Including 200 Amps Standard Bus Bar Of Suitable Size And Common Neutral Link All Flush Mounting Type, Drilling Holes For Incoming And Out Going Cables With Ip43 Protection Complete All As Specified & Directed By Engr-In-Charge. 111 S & F In Replacement Of Mcb, Single Pole 240 Volts 6 To 32 Amp Capacity For Fixing In Db’S Including Proper Thimble Connections Complete All As Specified And Directed By Engineer-In-Charge. 112 Supply And Fix In Replacement Of Mcb , Spn, 240 Volts ,40-63 Amp For Fixing In Dbs Of Including Proper Thimble Connections Complete All As Specified And Directed By Engineer-In-Charge. 113 M & L In Replacement Of Unsv Earthing Complete With Galvanized Iron Earth Plate Electrode Of Size 600X600X6.0Mm , Buried Directly In Ground (Earth Pit Not Less Than 2.25 Mtrs Below Normal Ground Level) With Top Edge Of Earth Plate Not Less Than 1.5 Mtr Below Normal Ground Level, Connected To Galvanized Earth Lead Wire 4.0 Mm Dia By Means Of Bolts , Nuts , Check Nuts And Galvanized Iron Or Steel Including Earth Work In Any Type Of Soil, Charcoal Salt 15 Cm Around The Earth Plate 20 Mm Dia Watering Pipe Medium Grade 1.70 Mtr Long With A Plug At Top, Gi Protection Pipe Light Grade 15 Mm Dia From Earth Pit To Main Board Including Pcc Pit In Cement Concrete 1:2:4 Along With Ci Frame And Cover 10Mm Thick Duly Hinged To Ci Frame As Shown In The Electrical Plate No3 Of Ssr 2009 Part 1 Specification At Page 497. 114 Xlpe Insulated ,Screened, Pvc Bedded, Galvanized Steel Wire Armoured, Electric Power Cables (Heavy Duty) 1100 Volts Grade With Stranded Aluminium Conductor Of Size 25 Sq Mm 4 Core Supplied & Laid In Replacement Complete All As Specified& Directed By Engineer-In-Charge. 115 Excavation In Trenches Not Exceeding 1.5 Mtr Wide And Not Exceeding 1.5 Mtr In Depth For Laying Of Cables Including Getting Out In Any Kind Of Soil Complete All As Specified And Directed. 116 Returning Filling In Including Spreading, Levelling, And Well Ramming, In Layers Not Exceeding 25 Cm Each Layer Of Any Kind Of Soil. 117 Removing Surplus Excavated Material From Site Not Exceeding 50 Mtrs From Starting Point And Depositing Where Directed At Level Not Exceeding 1.5 Mtr Above The Starting Point. 118 Material And Labour For Sand Cushioning For Cables 8 Cm Below The Cable And 15 Cm Above With Dry River Sand In Trenches For Cushioning Of Underground Cable Line Including Spreading, Leveling, Well Ramming Completed All As Specified And Directed. 119 Cutting Of Hardstanding Floor/Wall For Laying Of Cable Including Matching With Suface By Using Cement Concrete All As Specified And Directed. 120 Supplying & Laying Factory Made Unreinforced Precast Concrete Cable Covers Class Lv Type 1, Flat, Size 250X150X40Mm Laid In Trenches As Protection To Cables Complete All As Directed By Engr-In-Charge 121 Material And Labour For Replacement Of Gi Tubing Light Grade 40 Mm Bore For Passing Through Cables Under The Floor ,Along The Wall Or Along The Pole Complete All As Specified And Directed. 122 Dismantling Of Stone Slab And Tiles Laid Bedded And Pointed In Any Mortar Description Or Thickness In Floors, Apron Etc Complete All As Specified. 123 M & L For Screed Bed Or Bedding Layer Of Mortar 15 Mm Thick In Cm 1:6 For Laying Floor Finishes Complete All As Specified. 124 M&L For Virified Ceramic Light Shade Tiles 8 - 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc,Over & Including 15 Mm Thick Screed In Cement Mortar (1:4) Over And Epoxy Cartridge Tile Grout Using Fill The Joint Of Tiles Complete All As Specified.Note- Epoxy Black,Golden Colour. 125 All As Per Item No 124 But As A Skirting Incl. 10Mm Thick Rendering As In Back Coat Complete All As Specified. 126 M&L For 7 To 8 Mm Ant-Skid Ceramic Joint Free Premium Quality Coloured Tiles Area Of Each Tile Esc 0.06 Spm But Next 0.11Sqm, As In Floors Etc. In Any Pattern Ghe & Dark Tiles As Approved, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match, In Floors Etc. Over & Including 15 Mm Thick Screed In Cement Mortar (1:4) Over And Pointed In White Cement With Pigment To Match The Colour Of Tiles Complete All As Specified. 127 M & L For Machine Cut Cudappa Stone Slab 20 - 25 Mm Thick Laid Over Cement Screed Base 15Mm Thick In Cm 1:6 And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete All As Specified. 128 Rounding To Edges Of Stone Slabs One Edge, Such As In Steps, Cooking Platform, And Other Similar Situations All As Specified. 129 Dismantling Water Tanks And Removing To Store Of Capacity Exc 500 & Not Exc 1000 Ltrs Complete All As Specified. 130 Supply And And Fixing, Hoisting Pvc Tank Of 1000 Ltr Capacity Including Supplied And Fixed 20Mm Dia Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe And Fixed.(Minimum Weight 15Mm-142 Gms/20Mm-210Gms/25Mm-455 Gms/40Mm-690 Gms Float Valve Assembly Complete All As Specified And Directed. 131 S&F In Repair Wall Mixture Mixing Valves Incl. Three Joints To Steel Pipes Or Unions 15 Mm Bore Fancy Type Best Quality As Per Sample Approved By Ge Make-Jaquar Cat Part No Qqp-7217Pm Or Equivalent In Hindware/Kohlar. 132 S&F Pvc Cabinet 600X450Mm Overall Size With Looking Mirror Of Selected Qality Glass Mountedover Pvc Framing As Per Sample Complete Fixed In Repair Complete All As Specified. 133 S&F Stainless Steel Plate Rack Of Size Not Less Than 90Cmx75Cm(Wt N. Less Than 4 Kg) Fixed With Stainless Steel Screw Including Taking Out Old Unserviceable Wooden Plate Rack As Approved By Ge Complete All As Specified. 134 S&F In Repairs Chromium Plated Shower Roses With Swivel Joints 125 Mm Dia Size Incl Fixing To Gi Pipe/Union Fixed Make-Jaquar /Hindware/Kohlar. 135 M & L For Rendering 15 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:6 Finished Even And Smooth ( Without Using Extra Cement ) With Sagol Finish On Plastered Surface Complete All As Specified And As Directed. 136 M&L For Preparation Of New Decorated Plastered Or Unplastered Surfaces Of Walls And Applying Two Coats Of Exterior Emulsion Over One Coat Of Primer And Over 2Mm Thick Putty For Levelling And Smoothening, Complete All As Specified And Directed. 137 M&L Preparation Of New Plastered Surface Of Walls And Applying Two Coats Of Oil Bound Distemper Over 1.5Mm Thick Wall Care Putty Complete All As Specified And Directed. 138 M&L For Preparing New Plastered Or Unplastered Surfaces Of Ceiling, And Applying Three Coats Of White Wash Complete All As Specified And Directed. 139 S&F Sinks With Drainage Board Made Of Stainless Steel Lmm Thickkitchen Or Laboratory With Plugs,Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X 460Mm Bowl Size 410Mm X 330Mm X 160Mm Complete All As Specified And Directed. 140 S&F In Repair Brass Chromium Plated Sink Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe Of 15Mm Bore All As Specified And As Directed. Make: Jaquar /Hindware/Kohlar 141 S&F Powder Coated Anodised Aluminium Frame For Doors, Windows Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc. Complete All As Specified And Directed. 142 S&F Frosted Glass 4.00Mm Thick Ordinary Quality And Glazing With Oil Putty In Square N.Exc 0.50Sqm In Each Panes Complete All As Specified And Directed. 143 S&F 28-30 Mm Thick Moulded Wpc Factory Made 100% Sketon/Glased Door (Conforming As Per Is-4020) Made From 100% Lead Free Single Extruded With 2, 4 Or 6 Raised Panel Design On The Front Side With 10 Mm Deep Mould On Single Side With Wood Grain Texture And Back Side Palin With Density Not Less Than 600 Kg/Cum. Manufactured By An Iso : 9001-2015 Certified Company. The Door Should Be Water Proof, Termite Proof, Fire Etardant And Having Screw Holding Capacity Complete All As Specified 144 S&F Factory Made Wpc Extruded Board Cnc Machine Cut Jali Fixed To Skelton Door As Per Approved Design Complete All As Specified And Directed 145 S&F Kitchen Cabinets Including All Fittings And Fixtures Incl The Follwing. (A) 19Mm Thick Plywood Of Commercial Block Board,Make: Kitply/Century Ply/ Green Ply(B) 1Mm Thick Commerical Lamination On Both Side Fixed To Black Board(Colour And Design As Approved)(C) Ss Pullout Basket Ss Finish Of Plain 15 X 20 X 6 (D) D Type Handle 100Mm Ss Finish(E) Pullout Basket Ss Finish Cutlery Wire Of Size 15X20X4 (F) 2Nd Class Hard As In Frame Work(G)Ss Channels For Pullout Basket As Required. (Note:- The Measurement Shall Be Taken From Front Elevation And Not Girthwise. 146 S&F Factory Made Upvc Brown Colour Door Shutter Made Of Extruded Profile With Wall Thickness Of 2.3Mm(+-0.2Mm) Door Profile With Hollow Section With Multy Chamber. Frame (60X62Mm),Sash(42Mmx67Mm).Sliding Interlock(One Verticle Length In Each Shutter)(45.5Mmx28Mm).Glazing Bead(24.5Mmx16Mm)Will Be Mittred Cut And Fusion Welded At All Corner.Including Drilling Holes For Fixing Hardware And Drainge Of Water Etc Am,.Making Arrangement For Fixing Of Hardware.Epdm Gasket,1.2+0.2 Mm Thick Galvanised Steel Frame(30Mmx21.5Mm).Sash (30Mmx18Mm)Profile To Be Inserted In Required Profile.Frame Will Be Finshed To The Wall With 8Mmx100Mm Long Fasteners.Hardware Touch Lockof Zinc Alloyed(Brown Powder Coated)Steel Roller System Including 5Mm Thick Glazing With Selected Quality Glass ,Aluminium Track And Bottom Rail For Two Track Sliding Fram,Wool Pine For Sliding Sash And Interlock. Note.The Unit Rate Coated By Contractor Includes Cost Of Glass And All Other Conncted Accessories,Net Opening Will Be Measured For Purpose.Make:H2O Window,Fenesta,Anuplast As Approved By Ge. 147 M&L For Rcc 1:2:4 Type B-1 Using 20Mm Graded Crushed Stone Aggregate In Any Situation Except Foundation Complete All As Specified And Directed. 148 S&F 10Mm Dia And Above Tmt Bars Cut To Length, Bend To Shape As Required Including Cranking, Hooking Ends & Binding With Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Complete All As Specified And Directd. 149 All As Item No 77 Here In Before But 5Mm Dia And Over Upto & Including 10Mm Dia In Stirrups, Spaces & Binder Complete All As Specified And Directd. 150 S & F Powder Coated Aluminium Window/Ventilator Shutters, Side Hung Type With Sash Bars, Including Necessay Joinery Cleats, Glazing Clips, Rubber Packing, Chowkats Aluminium Snap Beading, Screws, Suitable Handle Etc With And Including Sheet Glass Or Ordinary Glazing Quality Of 4Mm Thick And Incl Gi Wire Mesh 0.56 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18 Mm , Size Of Side Rails , Top Rails , Bottom Rail 85X44.5Mm And Size Of Chowkat Frame 101.6X44.45Mm And Thickness Of Aluminium Member Shall Be 1.40Mm Thick Complete All As Specified. 151 S&F For Prelaminated Particle Board 18/19 Mm Interior Grade Prelaminated On One Side With Decorative Choice Lamination And Other Side Balancing White Lamination Fixed With Screw Timber Frame Work Including Dismantling Board All As Specified. 152 S&F In Repair Continuous (Paino) Hinges, Mild Steel, Bright Finish Or Electrogalvanised Width Of Flap (When Open) In 40Mm All As Specified. 153 S&F In Repair 40Mm Dia, Cupboard Knobs Fixed With Nut, Screw And Washer Of Mild Steel Bright Finished All As Specified. 154 S&F Ball Catches With 8Mm Dia Steel Ball And Brass Body And Striking Plate Including Letting In And Fixing Complete All As Specified. 155 Supply & Fix In Replacement Of Modular Bell Push Switch 1 Way, 6 Amps, 1 Module Complete All As Specified. 156 Supply & Fix In Replacement Of Call Bell Ding Dong Ac 230 Volt Single Pole Complete All As Specified. 157 Supply And Fix Exhaust Fan Ac Single Phase 230/240 V Of Size 300 Mm Sweep 900 Rpm Metal Body, High Efficiency Motor, Dynamically Balanced Blade For Better Performance And Corrosion-Resistant Powder Coated Metallic Finish Including Hole Making Louver Complete All As Specified And Directed By Engineer-In-Charge. 158 S & F Modern Energy Efficient Bedroom Muziris Wall Decorative Light Of Capacity 20 Watt Single Headed 240 Volt, Ip20 Rating, Controller Type (Push Button), Product Weight 1.04 Kg, Body Material (Metal), Power Source (Corded Electric),Lamp Base E27, Colour(Bronze) Incl Electrically Connection , Including Removing Of Unserviceable Decorative Light Fittings Of Any Description Complete All As Specified And Directed By Engr-In-Charge. Make: Philips Model No 31425 Or As Equivalent. 159 Excavating In Trenches N Exc 1.50M In Width And N Exc 1.50M In Depth For Foundation, Manholes Etc As Well As N Exc 10 Sqm On Plan Area And Getting Out In Soft/Loose Soil All As Specified And Directed. 160 M&L For Pcc 1:5:10 Type E-2, Using 40Mm Graded Crushed Stone Aggregate In Foundation, Filling And Mass Concrete All As Specified And Directed. 161 M&L For Broken Stone Hard Core Of Gauge N. Exc 63Mm, Deposited, Spread And Levelled In Layers N Exc 15Cm Thick, Watered And Rammed To A True Surface All As Specified And Directed. 162 S&F Mild Steel Deformed Bars, 6Mm To 8Mm Dia Cut To Length, Bent To Shape Required Including Cranking And Binding With & Including Mild Steel Wire (Annealed) Not Less Than 0-.90Mm Dia Complete. 163 M&L For Form Work To Soffits Of Suspended Slabs Such As Roof Slabs Etc For Rough Finished Concrete Surface Complete All As Specified And Directed. 164 M&L For Form Work To Sides For Slabs And Sides Of Rcc/Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exc 10 Cm But N Exc 20 Cm Wide For Fair Finished Concrete Surface Complete All As Specified And Directed. 165 Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams And Similar Work, Vertical Or To Batter For Rough Finished Flat Surfaces Of Concrete. 166 Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions, Square, Rectangular Or Polygonal For Rough Finished Flat Surfaces Of Concrete. 167 M&L For Rendering In Cement Mortar (1:6) 10 Mm Thick Finished Even Smooth Complete All As Specified On Brick Or Concrete Surface Of Fair Faces. 168 M&L 15Mm Thick Cement Plaster In Two Layer First Coat In Cm 1:6,10Cm Thick & Second Layer 5Mm Thick In Cm 1:4 Mixed With Wpc 3% By Weight Of Cement Including Finishing Fair & Even On Brick Or Concrete Surfaces Of Othern Than Fair Faces. 169 M&L For 5Mm Thick Cement Plastering To Rcc Surfaces In Cm :1:3) Finished Even And Smooth W/O Using Extra Cement On Ceiling Surfaces. 170 S&F Stainless Steel Butt Hinges Medium Weight Cold Rolled Isi Marked Of Size 100 Mm Complete All As Specified And Directed. 171 M&L For Ms Framed Guard Bars Conforming To Fe-410-0 Or Fe-310-0 Welded To Steel Windows/Ventilations Complete All As Specified And Directed. 172 S&F Vitrous China Squatting Pan Of Orissa Patterns Long Pan Size 580Mx440Mm White With P Or S Trap Front Of Back Inlet And Foot Rest Including Long Band Any Pattern (Excluding Flushing Cistern And Flush Pipe) Including Provision For Lime Concrete Bedding. 173 S&F Pvc Flushing Cistern Low Level 10 Ltr Cap With Inlet Ball Valve Float And Handle Syphonic Action Type Incl Brackets And Flush Pipe Of Polythene Of Low Or High Density Isi Marked. 174 S & F In Repairs Vitreous China Oval Shape Wash Basin, White, Flat Back, Size 580 X 450 Mm Excluding Taps, Waste, Chain And Plug And Porcelain Stopper But Including Brackets With 32 Mm Dia Waste Fittings, Brass, Chromium Plated With Waste Pipe Complete All As Specified. 175 S&F Looking Mirror Of Selected Quality Mounted On 6 Mm Thick Ply And Fixed To Wall With Wooden Plugs Chromium Plated Brass Screws And Washers. 176 S&F For Ci Floor Trap With Incl Jointing With Waste Pipe In Cement Mortar Of Size 100Mm. 177 S&F Gully Trap Stone Ware Square Of Round Mounted Type P Of Size 150X150Mm. 178 S&F 20Mm Dia Stop Valve Of Copper Alloy Screwed Down High Pressure With Crutch Or Butter Fly Handle Screwed On Both Ends For Iron Pipe Or For Union Fixed. 179 S&F Pvc Connection 15Mm Dia 600Mm Long Of Heavy Grade Screwed One End To Inlet Of Whb/Pillar Tap/Cistern Etc Complete Incl Brass Union Coupling On Both Ends Connfirming To Is-3076 Complete With Connector For Connection Old Water. 180 S& F For Ci Pipe 75Mm Dia Laid In Floor In Any Length With Or Without Cars With Cement Joint (Waste & Vent Pipe). 181 All As Per Item No 38 Here In Before But 100Mm Dia. 182 S&F For Ci Bend Any Radius Disminshing Pieces Or Tyes Of 100Mm Bore With Ducks For Or Head Rest. 183 S&F For Ci Branch Pieces Single Equal Or Unequal Ordinary Or Inverted Or With Paralled Brnach 100 Mm Bore. 184 S&F Cast Iron Sand Cast Pipe 100 Mm Dia With Or Without Cars With Cement Joint Fixed To Walls. 185 S&F Cast Iron 100 Mm Cowl. 186 M&L For Pcc 1:4:8 Type D-2 Using 40Mm Graded Stone Aggregate)75Mm Thick On In Sub Base Of Fllor .. 187 M&L For 15Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And Directd. 188 M&L For Coloured Glazed Ceramic Tiles On Vertical Surface (300Mmx600Mx7M) Thick Set And Jointed In Neat Cement Slurry And Pointed With White Cement To Match Complete All As Specified And Directd. 189 M&L For Coloured Non Skid Ceramic(300X300Mm) Tiles 7 To 8Mm Thick As In Floor Set And Jointed In Neat Cement Slurry And Pointed With White Cement To Match Complete All As Specified And Directd. 190 S&F Steel Ventilation With Top Hung Shutter Including Hinges, Steel Peg Stay Complete. 191 S&F 4Mm Thick Sheet Glass Of Figured,Pin Headed And Glazing With Oil Putty In Square N Exc 0.50 Sqm In Each. 192 M&L For Preparation Of Newly Steel Surfaces And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Over 10 Cm Width Or Girth Complete All As Specified And Directd. 193 M&L For Preparation Of Newly Plastered Surfaces And Applying Two Coats Of Cement Base Paint Over A Coat Of Chalk Whiting Complete All As Specified And Directd. 194 M&L For Three Coats Of White Wash On Wall Of Newly Plastered Surface. 195 S&F For Preparation Of Newly Plastered Surfaces And Applying Three Coats Of White Wash On Ceiling. 196 M & L For Factory Made Solid Pvc Door Frame Of Size 50 Mm X 47 Mm Made Out Of 5 Mm Plain Colour Pvc Sheet Reinforced With M.S Square Tube, Supplying & Fixing In Opening As Per Specification & Drawing Complete All As Specified And As Directed. 197 S&F Factory Made Solid Pvc Moulded Door Shutter, With Particle Board Core, 28 To 30Mm Thick (Stiles), With 2, 4, Or 6 Raised Panel Design With 2Mm Thick Moulded Pvc Sheet On The Front Face & 2Mm Plain Colour Pvc Sheet On Back Face & 5Mm Thick Plain Colour Pvc Sheet On Back Face, Supplying & Fixing In Frame At Site As Per Specification & Drawing All As Specified. 198 S&F Aluminium Tower Bolt 150Mm Long Stove Enamelled Black With Bright Bolt & Fixed. 199 S&F Aluminium Sliding Door Bolt With Hasp And Staples Type Bolt Type , 300Mm Long Stove Enamelled And Fixing Clips Of Sheet Cast Or Extruded Section Or Cast Aluminium Alloy And Fixed All As Specified. 200 S&F Aluminium Alloy Handle Of 100M Size Oval Type Stove Enamelled & Fixed All As Specified. 201 M&L For Rendering 10Mm Thick Cm (1:4) On Roof Slab Top, Mixed With Water Proofing Liquid Finished Even And Fair Without Using Extra Cement Complete All As Specified. Note: Water Proofing Liquid Shall Be Measured And Paid Separately. 202 M & L For Cleaning The Newly Plastered Surfaces Of Concrete ( Roof Etc) With Wire Brushes And Applying Water Proofing Treatment As Under :-I) Apply One Coat Of Oil Bound Bituminous Primer @ 0.25 Kg/Sq.M Ii) Providing And Laying 3 Mm Thick App Modified Water Proofing Membrane Weighing Not Less Than 3.5 Kg / Sqm Reinforced With Non Woven Polyester Mat Weighing Not Less Than 160 Gm/Sqm All As Specified Procured From Any One Of The Approved ManufacturerS Iii) Apply One Coat Of Solar Reflective Bituminous Aluminium Paint @ 0.15 Kg/Sqm Over Membrane Over Non Assesble Roof Surfaces Complete All As Per ManufacturerS Instructions And As Directed . 203 M/L Brick Work In Cm1:4, In Half Brick Thick Wall. 204 S&F In Repair Europen Wc China Ware Coloured Cascade With Cistern And Complete Fitting.Make: Jaquar/Hindware/Kohlar 205 S/F Vitreous China Toilet Paper Holder Fixed To Walls With Chromium Plated Cp) Brass Screws 206 S/F Vitreous China Soap Dish Of Appx Size 160*160*90Mm Any Type Fixed To Plugs With Chromium Plated Brass Screws 207 S/F Sheet Glass Shelf Assembly Consistig Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Brackets Guard And Railing 60Cm Long 208 S & F Brass Chromium Plated Tubular Towel Rail, 20 Mm Dia, D Type, 60 Cm Long Between Flanges Complete All As Specified. 209 M & L For Granite 20 Mm Thick Machine Cut, Bedded And Jointed With Grey Cement Slurry And Pointed With White Cement With Admixture Of Pigment To Match The Shade Of Granite Stone Including Griding And Polishing Types All As Specified. 210 M & L For Machine Cut Cudappa Stone Slab 20 - 25 Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete All As Specified. 211 M&L For 75 Mm Thick Pcc 1:3:6 Type C-1 (Using 20Mm Graded Stone Aggregate) As In Plinth Protection/Floors Complete All As Specified And Directed. 212 S&F Health Faucet Including Ms/Anodised Hanging Device Fixed Complete All As Specified And As Directed. 213 Surface Excavation Not Exceeding 30Cm Deep And Averaging 15Cm Deep And Getting Out In Loose / Soft Soil All As Specified And Directed. 214 M&L For Broken Stone Hard Core Of Gauge N. Exc 63Mm, Deposited, Spread And Levelled In Layers N Exc 15Cm Thick, Watered And Rammed To A True Surface All As Specified And Directed. 215 M & L 100Mm Thick Pcc 1: 4: 8 Type D2 (Using 40Mm Graded Stone Aggregate) As In Sub Base Complete All As Specified And Directed. 216 M&L For Machine Pressed Precast Concrete Interlocking Paver Block Rubber Moulded Any Shape And Size Confirming To Is 15658-2006 Of 60Mm Thickness, M-35 Grade With Grey And Pigment As In Floor/Pavement Complete All As Specified And As Directed. 217 M&L For Providing Precast Concrete Type C-1, 1:2:4(Using 20Mm Graded Stone Aggregate) As In Kerb Blocks With Plain Fiar Faces, Including Chamferes, Weathering, Throating Etc And Setting In Mortar 1:4 Complete With Joints To Match. 218 M&L For Cement Concrete Type 1:4:8 Type D-2 (Using 40Mm Graded Stone Aggregate) As In Foundations, Filling And Mass Concrete Complete All As Specified And As Directed. 219 M & L For Sand Filling Under Floors Or In Foundation Including Watering And Consolidation 220 S & F In Replacement Of New Generation Energy Saving And Environmental Friendly Long Life Led Building Security Light 1X25 Watts Made Up Of Pressure Die Cast Alluminium Housing With High Power Led As Light Source And Lense Embedded Pc Cover Having Top Opening Separate Driver Compartment With Ip65 Protection And Impact Resistance Of Ik07, With All Accessories Including Suitable Bracket With 32Mm Bore Light Grade Gi Pipe Bemd To Shape, Including Ms Clamp Of Size Of Required Size And Pvc Cable 1.5 Sqmm Twincore From Ceiling Rose To Light Fittings Complete All As Specified And Directed By Engineer-In-Charge. 221 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 9/10W 6500K Of Capacity ,10 Watt,2 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 222 M&L For Boring Of Holes Under Road, Pavement, Hard Standing By Trench-Less Technology Using Ultrasound Technique And Necessary Machine Suitable To Pass Through 40 To 80 Mm Bore Gi Tubing And Cable Etc Complete All As Specified And Directed.Note: Gi Pipe Shall Be Measured And Paid Seperately Under Relevant Item.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
5.
Science and Technology #11440503 Technical Bid
Tender for Earth Work , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, For All Lift, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.All Kinds Of Soil. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 And For All Lif. , Excavating, Supplying, Stacking And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Foundation Trenches, Plinth, Sides Of Foundation Etc. Complete For All Lift. , Cement Concrete (Cast In Situ) , Providing And Laying In Position Excluding Cement Concrete Of Level: Specified Grade The Cost Of Centering And Shuttering - All Work Up To Plinth 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Ill) Derived From Natural Sources: 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Sunken Floor Etc., Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering And Finishing: 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Ill) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Suspended Floors, Roofs, Landings, Balconies And Access Platform , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Columns, Pillars, Piers, Abutments, Posts And Struts , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement.All Works Upto Plinth Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement.All Works Above Plinth Level Upto Floor V Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Stone Work , Coursed Rubble Masonry (Second Sort) With Hard Stone In Foundation & Plinth With :Cement Mortar 1:6(1 Cement : 6 Coarse Sand) , Cladding Work , Providing Edge Moulding To 18Mm Thick Marble Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge,Granite Work , Wood And P. V. C. Work , Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately).Sal Wood , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Providing 40X5 Mm Flat Iron Hold Fast 400 Mm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 300X100x150 Mm 1:3:6 Mix (1 Cement: 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size). , Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. , Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm), With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. , Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper , Providing And Fixing Factory Made Upvc Glazed/Wire Mesh Windows/ Doors Comprising Of Lead Free Upvc Multi-Chambered Frame, Sash And Mullion/Coupler (Where Ever Required) Extruded Profiles Having Minimum Wall Thickness Of 1.70 Mm For Series R1 And R2 Profiles And 2.10 Mm For Series R3 And R4 Profiles Conforming To En: 12608 In Any Shape, Colour And Design Duly Reinforced With Galvanized Mild Steel Section Made Of Required Shape & Size As Per Cpwd Specification, Upvc Extruded Glazing Beads, Interlocks And Lnline Sash Adaptor (Where Ever Required) Of Appropriate Dimension, Epdm Gasket, Hardware, Ss 304 Grade Fasteners Of Minimum 8 Mm Dia With Countersunk Head, Comprising Of Matching Polyamide Pa6 Grade Sleeve For Fixing Frame To Finished Wall As Per Is 1367 : Part 1 To 14, Plastic Packers, Plastic Caps And Necessary Stainless Steel Screws Etc. Profile Of Frame, Sash & Mullion (If Required) Shall Be Mitred Cut And Fusion Welded/Mechanically Jointed Duly Sealed At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealant Over Backer Rod Of Approved Size And Quality, All Complete As Per Approved Drawing Conforming To Cpwd Specification & Direction Of Engineer-In-Charge. Section Of Steel Reinforcement And Cross Sections Of Upvc Profiles To Be As Per Design Approved By Engineer-In-Charge. Wire Mesh / Glazing Of Plain/ Toughened/ Laminated/ Double Glass Unit With / Without High Performance Coatings As Per Design Requirements And Conforming To Is: 3548 & Is: 16231 Shall Be Paid Separately. Note:- Structural Design Proof Checked From A Government Engineering Institute, To Be Provided By The Manufacturer For (I) Sites With Basic Wind Speed 45 M/Sec As Per Is 875 - Part 3 (Ii) Sites With Structure Height More Than 20M For All Wind Speedscasement Window Double Panels With Fixed Mullion With S.S. 304 Friction Hinges As Per Size And Weight Of Sash, Multi-Point Locking System, Zinc Alloy (Zamak) Powder Coated Handles.Using R2 Series With Frame (39 Mm & Above) X (39 Mm & Above) & Sash (39 Mm & Above) X (60 Mm & Above) & Mullion (39 Mm & Above) X (60 Mm & Above). (Height Upto 1.2 Metre). , Steel Work , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Hot Finished Welded Type Tubes , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works , Flooring , Providing And Laying Vitrified Tiles In Floor In Diferent Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) Jointing With Grey Cement Slurry @3.3 Kg/Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc. The Tiles Must Be Cut With The Zero Chipping Diamond Cutter Only . Laying Of Tiles Will Be Done With The Notch Trowel, Plier, Wedge, Clips Of Required Thickness, Leveling System And Rubber Mallet For Placing The Tiles Gently And Easily.Double Charge Vitrified Tile Polished Finish Of Size Of Tile 600 X 600 Mm , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge :Flamed Finish Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. , Finishing , 20 Mm Cement Plaster Of Mix:1:4(1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix:1:4(1 Cement: 4 Coarse Sand) , 6 Mm Cement Plaster 1:3 (1 Cement: 3 Fine Sand) Finished With A Floating Coat Of Neat Cement And Thick Coat Of Lime Wash On Top Of Walls When Dry For Bearing Of Reinforced Cement Concrete Slabs And Beams. , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , 12 Mm Thick Plain Cement Mortar Bands In Cement Mortar 1:4 (1 Cement: 4 Fine Sand):Moulded Band , Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work (Two Or More Coats Applied @ 1.43 Itr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm) , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade :Two Or More Coats On New Work , French Spirit Polishing :Two Or More Coats On New Works Including A Coat Of Wood Filler , Wall Painting With Acrylic Emulsion Paint, Having Voc (Volatile Organic Compound ) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats , Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc (Volatile Organic Compound ) Content.With Water Thinnable Cement Primer On Wall Surface Having Voc Content Less Than 50 Grams/Litre , Dismantling And Demolishing , Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge.Nominal Concrete 1:3:6 Or Richer Mix (Including Equivalent Design Mix) , Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. , Aluminium Work , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item):With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Filling The Gap In Between Aluminium Frame & Adjacent Rcc/ Brick/ Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete.Upto 5 Mm Depth And 5 Mm Width , Market Rate Items , Provinding Precast Cement Concrete Solid Block Masonry Including Hoisting And Setting In Position With Cement Mortar 1:6 (Cement :6 Coarse Sand) Completed As Per The Direction Of Engineer In Charge As Per Site Condition , Providing And Fixing 5 Mm Thick Clear Transparent Acrylic Sheet Of Approved Brand And Manufacture For Fixed Curved Portions In Openings, Including Epdm Rubber/Neoprene Gasket And All Necessary Accessories, Complete In All Respects As Per The Directions Of The Engineer-In-Charge. , Electrical Work , Laying And Fixing Of One No Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Upto 35 Sq.Mm (Clamped With 1Mm Thick Saddle) Size On Wall Surface As Required. , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For 4 X 16 Sq. Mm (25Mm) Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. , Supplying And Fixing Of 4 Way (4 + 12), Double Door Surface/ Recess Mounting, Vertical Type, 415 V, Tpn Mcb Distribution Board Of Sheet Steel, Dust Protected, Duly Powder Painted, Inclusive Of 200 A Tinned Copper Bus Bar, Common Neutral Link, Earth Bar, Din Bar For Mounting Mcbs As Required . , Supplying And Fixing 6 Way, Double Door, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator. , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole And Neutral , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Triple Pole , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Triple Pole And Neutral , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.4 X 6 Sq. Mm + 2 X 6 Sq. Mm Earth Wire , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 2 Module (75Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 3 Module (100Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 6 Module (200Mmx125mm) , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 5/6 A Switch , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 15/16 A Switch , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 3 Pin 5/6 A Socket Outlet , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 6 Pin 15/16 A Socket Outlet , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Bell Push , 2M Stepped Type Electronic Fan Regulator , Wiring For Light Point/Fan Point/Exhaust Fan Point/Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Group Controlled (Looped) Light Point/ Fanpoint/ Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit,And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. (Group-C) , Providing And Fixing 6 Swg Dia G.I Wire On Surface Or In Recess For Loop Earthing As Required. , Supplying, Installation, Testing & Commissioning Of Photo Electronic Smoke Detector With Builtin Led And Mounting Base Plate Suitable With Ms Junction Box For Operation On 12V / 24V Complete With All Connections Etc. As Required. , Supplying, Installation, Testing & Commissioning Of Manual Call Box Of Abs Type In Surface/Recess With Stainless Steel Chain & Hammer Assembly Complete With Glass And Push Button Etc. As Required. , Supplying & Laying Of 2 X 1.5 Sqmm Fire Alarm Armoured Cable, 600/1000V Rated With Annealed Copper Conductor Having Xlpe Insulation, Steel Wire Armouring & Frls Outer Sheath Complete As Required. , Supplying And Fixing Dp Sheet Steel Enclosure On Surface / Recess Along With Upto 32A, 240 V, C Curve Dp Mcb Complete With Connections, Testing And Commissioning Etc. As Required. , Supplying And Fixing 30 A, 415 V, Tpn Industrial Type Socket Outlet, With 4 Pole And Earth, Metal Enclosed Plug Top Alongwith 32 A C Curve, Tpmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required , Supplying And Fixing 20 A, 240 V, Spn Industrial Type Socket Outlet, With 2 Pole And Earth, Metal Enclosed Plug Top Alongwith 20 A C Curve, Spmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required , Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep,Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cmm/W) Minimum 6.85, Air Delivery Minimum 215 Cmm, 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Speed Control Compitable For Electronic Type Regulator And All Remaining Accessories Including Safety Pin,Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Including Fixing Fan Hook In Ceiling Complete As Required. , Supplying, Installation, Testing & Commissioning Of Panel Light 2X2 Ft.,40W Of Powder Coated Die Cast / Extruded Aluminium Body (Thickness ≥ 1.20 Mm) Body Material And Construction As Per Is : 10322 With Driver As Per The Requirement With Driver Efficiency 85%, Operating Voltage Ac 140 270 Volt, Freq 50/60 Hz, Operating Temp Range -15 Deg To 40 Deg Centigrade, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection, Thd 10% , P. F.≥0.95, Ip20, Cri 80, Ugr (Unified Glare Rating) 19, Flicker Free, (Flicker Should Be Below 5 %), Life Time (Led,Driver & Electrical Circuitry), Of Minimum 50000 Burning Hours With, 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11Report, Cct 5700°K (As Per Ansi Bin), Sdcm(Standard Deviation Color Matching) 3, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard And Trade Mark Certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing. Complete In All Respect I/C Connections With 1.5 Sq Mm Frls, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required. System Lumen Efficacy ≥105 Lm/Watt Output . Lm79 & Lm80 Test Report From Nabl Lab For All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. , Supplying And Fixing Of 25Mm Size Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. , Supplying And Drawing 1 Run Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. , Supplying And Installing 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness Size Of Perforated Painted With Powder Coating M.S. Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended/Surface Mount From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. , Supplying And Installing 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness Size Of Perforated Painted With Powder Coating M.S. Cable Trays Bends With Perforation Not More Than 17.5%,, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. , Supplying And Fixing Call Bell/ Buzzer Suitable For Single Phase, 230 V, Complete As Required. , Supplying And Fixing Fp Mcb Sheet Steel Enclosure With Din Rail On Surface / Recess Etc. As Required. , Supplying & Fixing Of 4Pole, 63 A Rating, 415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,4C X 16Sq.Mm, Aluminium , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,4C X 6Sq.Mm, Copper , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,3C X 4 Sq.Mm, Copper , Supply And Laying Of Un Armoured Copper Single Core 10 Sq.Mm Flexible Cable With Annealed Copper Conductor In Suitable Size Hdpe Pipe In Ground/ On Surface As Required. , Supplying And Making End Termination With Brass Compression Gland And Copper Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Copper Conductor Cable Of 1.1 Kv Grade As Required.4 X 6 Sq.Mm , Supplying And Making End Termination With Brass Compression Gland And Copper Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Copper Conductor Cable Of 1.1 Kv Grade As Required.3 X 4 Sq.Mm , Supply ,Installation, Testing And Commissioning Of 2 Tr/24000Btu Per Hour And Bee-5 Star Rated Wall Mounted Inverter Type Hi Wall Split Cooling Air Conditioner Having Wireless Remote Controller, Hermetically Sealed/Scroll/Rotary Compressor And Eco Friendly Refrigerant,Initial Charge Of Refrigerant,Condensor And Evaporator Coils Of Copper Material, Air Filter With Auto Swing & Auto Restart Features, Suitable For Operation On 230V, Single Phase, 50Hz, Ac Power Supply. The Indoor Unit Shall Be Fixed Rigidly On Wall Using Necessary Frame, The Outdoor Unit Shall Be Mounted On Wall Or Floor Using Suitable Powder Coated Ms Angle Frame As Required. Including Clamps, Bolts, Nuts,Vibrating Dampers, Laying Of 3 Meter Standard Length Of Copper Refrigerant Piping With 3 Meter Pvc Covering Pipe, 3 Meter Drain Piping, Wrapping Tape And Necessary Insulation ,Electrical Flexible Cable Connectivity Between Indoor And Outdoor Unit. Necessary Drilling Of Hole And Finishing The Same To Match For The Surrounding As Required. , Supplying And Fixing Of Frp Box 200Mmx140mmx95mm Size (Nominal Size) On Surface With Hinged Door With Suitable Grounding Copper Bar Link With Holes Fitted Inside The Box Etc. As Required. , Supplying And Fixing Of Dual Rj 45 / Io Outlet On Existing Modular Switch Plate. , Supply,Installation,Testing And Commissioning Of Maintenace Free Earth Pit Of Single Pipe Technology Copper Pipe Of 2000Mm Long (Min), Outer Dia 50 Mm, Wall Thickness 1.2Mm(Min), Filled With Highly Conducting Metallic Compounds With The Permanent Sealing At Both The Ends And Lead Terminal Of 50 X 10 Mm Size At The Top The Length Of The Electrode Shall Be 2000 Mm Excluding The Lead Terminal And The Length Of The Lead Terminal At The Top Shall Be Minimum 50Mm. To Ensure The Moisture Content And Electrical Conductivity, Resistance Lowering Grounding Minerals Shall Be Filled Around The Electrode Of (Min25 Kg) .Heavy Duty Weather Proof Plastic Earth Pit Chamber With Cover Of Dimension 300 Mm Dia (Top), 260 Mm Dia(Bottom) And 300 Mm (Height) Shall Be Used, Numbering Of Pit And Measured Value Written With Weather Proof Painting Or Stickering. As Required.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
6.
Educational and Research Institute #11437127 AOC
Supply Of Science Lab Equipment To ( 17 ) New Govt. Junior Colleges In Telangana State---17 Physics Lab: Supply Of Ammeter 10Amps 34 Supply Of Bar Magnet 50Mm 34 Supply Of Commutator 17 Supply Of Copper Calorimeter With Stirer 17 Supply Of Cube Set Of Six Metal 17 Supply Of Deflection Magnatometer With Compass 34 Supply Of Drawing Board 23X16 102 Supply Of Equilatera Prism 30X30 34 Supply Of Galvanometer 30-30 34 Supply Of High Resistance With Short Circuit Key 34 Supply Of Thermometer Laboratory Laboratory Thermometer 110C / 220F / 360 C 17 Supply Of Lead Shots 100Gram 170 Supply Of Magnetic Compass Needles Small 17 Supply Of Meter Bridge With Pencil Jockey 17 Supply Of Ohms Law [ 2 Meters ] Or Series & Parallel Aparatus 17 Supply Of Physical Balance 34 Supply Of Plug Keys 17 Supply Of P-N Or Zenor Diode Charc.. Aparatus 34 Supply Of Quill Tube 34 Supply Of Resistance Box 34 Supply Of Resonance Apparatus 34 Supply Of Retort Stand With Boss & Head Clamp [ Labolatory Stand ] 34 Supply Of Rheosstat - 6 34 Supply Of Screw Guage 51 Supply Of Slotted Weights [ 5X50 Gms ] 34 Supply Of Standard Resistance Coils 17 Supply Of Stop Clock 34 Supply Of Tangent Galvanometer 34 Supply Of Turning Fork [ Each ] 34 Supply Of Vernier Caliper 34 Supply Of Voltmeter 34 Supply Of Weight Box For Physical Balance 68 Supply Of Z-Pulleys [ Clamp With Pulley ] 85 Chemistry Lab: Supply Of Beaker - 500Ml 85 Supply Of Beakers - 100Ml 85 Supply Of Beakers - 250Ml 85 Supply Of Boiling Test Tubes ( Borosil ) 34 Supply Of Bunsen Burner With Stopcock 85 Supply Of Burette - 50Ml 85 Supply Of Burette Clamp [ Fischer Clamp ] 85 Supply Of Burette Stands 17 Supply Of Chemical Balance [ Analytical Balance ] 170 Supply Of Conical Flask - 250Ml 425 Supply Of Dropper 170 Supply Of Glass Rods 34 Supply Of Measuring Cylinder - 100Ml 34 Supply Of Measuring Cylinder - 250Ml 34 Supply Of Measuring Jar - 50Ml 17 Mortar & Pestle - Porcelin 170 Supply Of Pippette - 20Ml 170 Supply Of Reagent Bottle - 250Ml 34 Supply Of Separating Funnel - 250Ml 850 Supply Of Test Tube - 20Ml 425 Supply Of Test Tube Cleaning Brush 170 Supply Of Test Tube Holders 170 Supply Of Test Tube Stand - 6 Holes 34 Supply Of Tripod Stand 170 Supply Of Volumetric Flask - 250Ml 170 Supply Of Wash Bottle 340 Supply Of Watch Glass [ 3 ] 170 Supply Of Wire Guage With Frame 51 Botany Lab: Supply Of Any Prepared Permanent Slides Of Botony 34 Supply Of Blank Slides Box 68 Supply Of Blotting Paper Sheet 102 Supply Of Chromatographic Paper 51 Supply Of Cobalt Chloride Paper Box 17 Supply Of Compound Microscope 136 Supply Of Cover Slip Pack 170 Supply Of Dropper 68 Supply Of Hand Magnifying Lenses 68 Supply Of Mortar & Pestle Set 68 Supply Of Spirit Lamps 34 Supply Of Staining Rack 340 Supply Of Watch Glass 85 Zoology Lab: Supply Of Any Models Of Biology;Multi Colour Superior Quality [ 3D Models ] 323 Supply Of Any Prepared Permanent Slides Of Zoology 68 Supply Of Beaker -250Ml 68 Supply Of Beaker - 400Ml 17 Supply Of Compound Microscope 17 Supply Of Dissection Microscope 85 Supply Of Pippette - 2Ml 85 Supply Of Pippette- 5Ml 34 Supply Of Rabbit Joint Any One As Per Your Requirement 85 Supply Of Spirit Lamps 340 Supply Of Test Tube - 20Ml 85 Supply Of Test Tube Stands 17 Supply Of Water Bath 17 Supply Of Iodine Solution 17 Supply Of Benedicts Reagent [ Solution ] 17 Supply Of Ethyl Alchol
Contract Date: Ref. Documents Contract Value : 19.04 Lakh
Government Departments No of Bidders 1
7.
Health and Family Welfare #11430568 Technical Bid
Tender for Pruchase Of Surgical And Sutures Items At Govt Hospital Bundi , Surgical And Sutures , Absorbable Gelatin Sponge Ip 66, Size 80(+-10) Mm X 50 Mm X 10 Mm Should Be Sterlized. , Asepto Syringe With Transparent Bulb Sterile, 60 Ml , Blood Administration Set / Blood Transfusion Set • Sharp And Easy Piercing Spike Suitable For Blood Bags And Standard Blood Containers • Transparent Cylindrical Drip Chamber With Filter.Filter Size Should Be 200+20 Micrometer. • 150 Cm Long Smooth Kink Resistant Tubing • Efficient Roller Clamp To Control And Adjust The Transfusion Rate • Should Conform To Is 9824(Part 3):1996 , Disposable Sterile Surgical Rubber Gloves Size 6 ½ Inches • Made Of Natural Rubber Latex, Powdered, Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Powder Should Be Non-Allergenic • Should Conform To Is 13422 • Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 6 ½ Inches • Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Should Conform To Is 13422 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards) , Disposable Sterile Surgical Rubber Gloves Size 7 Inches • Made Of Natural Rubber Latex, Powdered,,Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Powder Should Be Non-Allergenic • Should Conform To Is 13422 • Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 7 Inches • Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Should Conform To Is 13422 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards) , Disposable Sterile Surgical Rubber Gloves Size 7½ Inches • Made Of Natural Rubber Latex, Powdered, Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Powder Should Be Non-Allergenic • Should Conform To Is 13422 • Isi Marked / Ce Certified / Fda Approved , Disposable Sterile Surgical Rubber Gloves Size 7 ½ Inches • Made Of Natural Rubber Latex, Powder Free (Polymer /Silicon Coated), Without Tear, Properly Folded In A Paper • Free Of Holes, With Acceptable Quality Level (Aql) Of 1.5 Or Less • Tensile Strength As Per En 455-2 • Should Conform To Is 13422 Isi Marked / Ce Certified / Fda Approved (Ce Certification / Fda Approval For Item Is Mandatory For Importer Firms, That Cannot Avail Is Standards , Suction Catheter, Sterile. Size: Fg 5 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 6 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 8 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 10 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 12 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 14 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 16 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 18 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 20 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Suction Catheter, Sterile. Size: Fg 22 (For Use In Respiratory Tract) • Soft, Kink Resistant Tubing • Rounded Open Tip With Lateral Eye • Colour Coded Universal Funnel Connector For Safe Connection To Standard Suction Equipment • Length 50 Cm (Min.) • Should Conform To Is0 8836:2014 , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size 8 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 3- 5 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is 11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size10 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 3- 5 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size16 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size18 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size20 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size22 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Sterile Catheter, Single Use, For Urinary Drainage (Foley Balloon Catheter), 2 Way, Size 24 Fg • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For Atraumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30 ± 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Balloon Capacity Should Be Mentioned As Per Is 11497. • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is11497 For Particular Size , Infant Feeding Tube Size:10Fg Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure • Radio Opaque Line • Sterile , Infant Feeding Tube Size:8Fg, Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure • Radio Opaque Line • Sterile , Infant Feeding Tube Size:5Fg Length 50 Cm (Min.) • Two Lateral Eyes At Distal End • Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa • With Female Flexible Mount With In-Built Closure • Radio Opaque Line • Sterile , Sterile Disposable Perfusion Set With Airway And Needle (Adult Use) • For Gravity Feed Only • Sharp And Easy Piercing Spike With Air Vent • Transparent And Flexible Drip Chamber • 150 Cm Long Smooth Kink Resistant Tubing • Self Sealing Latex Bulb Which Will Also Act As An Port For Extra Medication • Efficient Roller Clamp To Control And Adjust The Fluid Rate • 21 G Needle • Should Conform To Is 12655 -4 Standard , Sterile Disposable Perfusion Set (Infusion Set) With Airway And Needle (Paediatric Use) • Burette Type Measured Volume Chamber Of 100 Ml • Drop Size Of Approx 60 Drops Per Ml • Injection Port,Latexfree, For Intermittent Medication. • Floating Auto Shut Off Valve (Latex Free) In Burette. • Soft And Kink Resistant Pvc Tubing. • Roller Controller For Flow Control • Tube Length 150 Cm • 23G Needle • Should Conform To Iso 8536-5 , Sterile Disposable Infusion Set With Microdrip (I.V.) • Microdrip Infusion Set With Drop Size Reduced To Approx 60 Drops Per Ml • Sharp And Easy Piercing Spike • Transparent And Flexible Drip Chamber • 150 Cm Long Smooth Kink Resistant Tubing • Efficient Roller Clamp To Control And Adjust The Fluid Rate • Should Conform To Is 12655 - 4 Standard , Insulin Syringe ( 40 Units) With (Fixed) 30 G Needle Shall Conform To Is 12227 , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 16G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. ) Size 18G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 20G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon / Ptfe I.V. Cannula With Integrated 3 Way Stop Cock. Size 22G • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Sterile Disposable (Single Use) Teflon/ Ptfe I.V. Cannula Without Port. Size 24G • Suitable For Paediatric & Neonatal Use • Should Be Packed In Transparent, Single Blister Pack. • Should Conform To Is 10555 Standard , Mucus Extractor Sterile • Clear Transparent Container • Antibacterial Filter • Soft, Kink Resistant Pvc Tubing • Tube Size 10 Fg; Length 40 Cm (Min.) • Capacity 25 Ml , Nasal Oxygen Cannula (Set), Twin Bore (Accessory For Compressed Air Breathing) All Sizes (Adult) • Soft And Kink Resistant Pvc Tubing • Multichannel / Star Lumen To Preventing Accidental Kinking • Twin Bores Should Ensure Equal Volume Of Oxygen To Both Air Passages • Connector For Easy Connection To The Oxygen Source • Tube Length 200 Cm , Nasal Oxygen Cannula (Set), Twin Bore (Accessory For Compressed Air Breathing) All Sizes (Pediatrics) • Soft And Kink Resistant Pvc Tubing • Multichannel / Star Lumen To Preventing Accidental Kinking • Twin Bores Should Ensure Equal Volume Of Oxygen To Both Air Passages • Connector For Easy Connection To The Oxygen Source • Tube Length 200 Cm , Paper Adhesive Plaster 1 X 9.0 Mts (With Cutter) • Non Woven. • Non Allergic & Strong Adhesive But Gentle To Skin. • Painless Removal. • Porous And Breathable. Paper Adhesive Plaster Should Conform To The Standards And Test Prescribed In Applicable Is And Bp Standard. , Paper Adhesive Plaster 2 X 9.0 Mts (With Cutter) • Non Woven. • Non Allergic & Strong Adhesive But Gentle To Skin. • Painless Removal. • Porous And Breathable. Paper Adhesive Plaster Should Conform To The Standards And Test Prescribed In Applicable Is And Bp Standard. , Paper Adhesive Plaster 3 X 9.0 Mts (With Cutter) • Non Woven. • Non Allergic & Strong Adhesive But Gentle To Skin. • Painless Removal. • Porous And Breathable. Paper Adhesive Plaster Should Conform To The Standards And Test Prescribed In Applicable Is And Bp Standard. , Plaster Of Paris Bandages 15Cm X 2.7Mts / Roll Should Conform To Schedule F(Ii) Of Drug And Cosmetic Act 1940 , Plaster Of Paris Bandages 10Cm X 2.7Mts / Roll Should Conform To Schedule F(Ii) Of Drug And Cosmetic Act 1940 , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 10 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 12 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 14 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 16 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Ryles Tube / Nasogastric Tube (P.V.C.) With Radio Opaque Lining. Size: 18 • Soft, Kink Resistant Pvc Tubing For Atraumatic Intubation • Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation • Four Lateral Eyes For Greater Efficiency • Radio Opaque Line • Marking At 50, 60, 70 Cm From Tip • Colour Coded Funnel • With Luer Connector / Closure • Length 105 Cm , Scalp Vein Set (Disposable): Size 18G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Scalp Vein Set (Disposable): Size 20G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Scalp Vein Set (Disposable): Size 22G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Scalp Vein Set (Disposable): Size 24G • Butterfly Shaped Wings For Easy Handling And Attachment With Skin. Colour Coded • Needle Should Be Bevelled, Siliconised And Should Ensure Atraumatic Cannulation • Female Luer Fitting At One End • Soft, Kink Resistant, Non-Toxic, Non Irritant Tube • Sterile , Sterile Hypodermic Syringe With Needle Attached, 24G, Single Use - 2 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container , Sterile Hypodermic Syringe With Needle Attached, 24G, Single Use - 5 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 10 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 20 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Surgical Blade Sterile, Size 11 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Surgical Blade Sterile, Size 15 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Surgical Blade Sterile, Size 22 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Sterile Disposable Spinal Needle For Single Use 22G X 3 ½ Inch • Clear / Transparent Hub • Sharp Tip Which Should Ensure Minimal Puncture Trauma , Sterile Disposable Spinal Needle For Single Use 25G X 3 ½ Inch • Clear / Transparent Hub • Sharp Tip Which Should Ensure Minimal Puncture Trauma , Urine Collecting Bag, Disposable 2000 Ml • Transparent Sheet • Kink Resistant Flexible Tubing Not Less Than 90 Cm In Length • Should Have Non-Return Valve • Top Drainage Outlet • Graduated Bag • Moulded Handle For Easy Handling , Double J Stent, Sterile, Both Ends Open - Size 4F, Length 16 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, Both Ends Open, Size 5F, Length 20 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, One End Closed - Size 4F, Length 16 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Double J Stent, Sterile, One End Closed, Size 5F, Length 20 Cm • Radio Opaque • Should Be Of Inert Material, Non- Irritant To Tissue , Endotracheal Tube, Plain - Size 2.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 3Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 3.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 4Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 4.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 5.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain With Radio-Opaque Line, Sterile, Single Use - Size 6Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 6.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 7Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 7.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 8Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Plain - Size 8.5Mm • Transparent • Standard 15 Mm Connector At Proximal End • Radio-Opaque Line Throughout The Length • Tip Suitable For Nasal And Oral Intubation • Single Use, Sterile , Endotracheal Tube, Cuffed - Size 4Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 4.5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 6Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 6.5Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 7Mm • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 7.5 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 8 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 8.5 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Endotracheal Tube, Cuff - Size 9 • Soft Cuff Towards The Distal End • Kink Resistant Inflation Tube • Murphy Eye At Distal End With Polished Smoothness • Radio-Opaque Line • Standard 15 Mm Connector • Sterile, Single Use • Curved Shaped Blister Pack - Suiting The Shape Of Product , Tracheostomy Tube (Pvc), Plain, Sterile, Single Use - All Sizes • Soft Flexible Flange At For Easy Fixation • 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction • Non-Irritant • Radio-Opaque Line , Tracheostomy Tube (Pvc), Cuffed, Sterile, Single Use - All Sizes • Soft Flexible Flange At For Easy Fixation • 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction • Non-Irritant • Radio-Opaque Line • Balloon With Non Return Valve , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 24) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 28) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 32) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Polypropylene Nonabsorbable Synthetic Surgical Mesh 7.5 Cmx 15 Cm Soft To Feel Fast Edges,Slightly Stretchbonding. , Polypropylene Nonabsorbable Synthetic Surgical Mesh 15 Cmx 15 Cm Soft To Feel Fast Edges,Slightly Stretchbonding. , Sterilised Umbilical Cotton Tape Width 3 Mm, Length 75 Cm Should Conform To Schedule F(Iii) Of Drug And Cosmetic Act 1940 , Bone Wax Sterilised , Skin Graft Knife Blade (Sterile) (Disposable ) Skin Grafting Knife Blade (Sterile) Made Of Carbon Steel Or Stainless Steel Material 158 Mm Long Individually Wrapped In Wrapper Corrosion Inhibitor Paper In Single Packet,.In Packs Of 10. The Edge Must Be Sharp Enough To Cut The Skin In A Single Shave And Should Snugly Fit In The Handle Should Conform To Is 3759. 2. Skin Grafting Knife Handle (Watson Modification Of HumbyS Knife ) Stainless Steel, Ce Certified, In Which The Blade Specified In (A) Above Should Fit Snugly. Should Conform To 7980-1976. , K Wire, Length 375 Mm; 1Mm Length Of Wire Should Be Mentioned With Specification. Should Conform To Is 8261 , K Wire, Length 375 Mm;1.6Mm • Length Of Wire Should Be Mentioned With Specification. • Should Conform To Is 8261 , K Wire, Length 375 Mm; Size 1.8Mm • Length Of Wire Should Be Mentioned With Specification. •Should Conform To Is 8261 , Face Mask, Disposable • Should Be Manufactured From Non Woven Poly Prop Fabric • Should Be 3 Ply Construction • Should Have High Bacterial Filtration Efficiency • Should Be Heat Sealed To Keep 3 Layers Together • Standard Size 17.5 X9 Cm • Color Green/Blue • There Should Be A String Each At All Four Corners,Length Of String Should Be 40Cm • Nose Clip Should Be There • No Elastic Band. , Surgical Cap, Disposable (For Surgeons) • Should Be Manufactured From Non Woven Fabric. • Strip For Tying The Cap Stitched On The Back For Proper Grip On The Forhead. • Green Colour • Ultrasonically Stitched • Air Permeable/Breathable • Should Retain Skin And Hair Particle. • Strip For Tying The Cap , Surgical Cap, Disposable ( For Nurses) • Should Be Manufactured From Non Woven Fabric • Blue / Green Colour • Round Upon Wearing, With Elastic • Air Permeable / Breathable • Should Retain Skin And Hair Particles , Foldable Intra Ocular Lense With Injector (Size + 11 D To +17.5 D) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 11 D To +17.5 D At 0.5 D Step. 9. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Foldable Intra Ocular Lense With Injector (Size + 18 D To + 24 D) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic/Plate Haptics 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 18 D To + 24 D At 0.5 D Step. 9. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Foldable Intra Ocular Lense With Injector (Size + 24.5 D To + 28.5 D ) Size:6Mm Optics. 12-13Mm Total Diameter 1. Made Of Foldable Acrylic (Hydrophobic) Material 2. Bi-Convex Single Piece Iol With Aspheric Optics 3. Size:6Mm Optics. 12-13Mm Total Diameter. 4. Modified C Loop Haptic 5. Iol Should Have Uv Blocking Capability 6. Iol Should Have 360°Square Edge.. 7. Foldable And Insertion By Injector With Disposable Cartridge Insertable By A Sub 2.8 Mm Incision Size Or Smaller Incision 8. Diopters- + 24.5 D To + 28.5 D At 0.5 D Step. 9. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 11 D To +17.5 D) • 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Biconvex 3. Iol Haptics - Modified C Shaped With 5° -10° Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 11 D To +17.5 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 18 D To + 24 D) • 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Biconvex 3. Iol Haptics - Modified C Shaped With 5° -10° Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 18 D To + 24 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Standard Pmma Intra Ocular Lenses (Size + 24.5 D To + 28.5 D ) 6Mm Optic Size 12.5 - 13.0 Mm Total Diameter, Biconvex 1. Pmma Optics And Haptics Single Piece With Hole 2. 6Mm Optic Size 12.5 To 13Mm Total Diameter, Bioconvex 3. Iol Haptics - Modified C Shaped With 5° -10° Anterior Angulation. 4. Should Have 360° Square Edges. 5. Iol Should Have Uv Blocking Capability 6. Diopters- + 24.5 D To + 28.5 D At 0.5 D Step. 7. Supplying Unit Should Be Iso Accredited And Iol Should Be Ce/Us Fda Certified. , Disposable Sterile Surgical Rubber Gloves Size 8 Inches • Made Of Natural Rubber Latex Powdered,Without Tear,Properly Folded In A Paper • Should Conform To Is 13422 • Isi Marked/Ce Certified/Fda Approved • Colour Code Marking To Designate Size , Disposable Sterile Surgical Rubber Gloves Size 8 Inches • Made Of Natural Rubber Latex Powder Free,Without Tear,Properly Folded In A Paper • Should Conform To Is 13422 • Isi Marked/Ce Certified/Fda Approved • Colour Code Marking To Designate Size , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Extra Small. Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Small Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Medium Should Conform To Is 15354 , Rubber Examination Gloves Made Of Natural Rubber Latex. Non-Sterile, Ambidextous, Aql 1.5 Micro Textured Powdered With Absorbable Dusting Powder Usp. Large Should Conform To Is 15354 , Pressure Monitoring Line / High Pressure Extension Line • Suitable For High Pressure Monitoring And For Connection Between Syringe Infusion Pump And Patient • Male Luer Lock At One End And Female Luer Lock At Other End ; Should Fit All Standard Equipment. Luer Lock Connectors Should Provide Secure Fitting. • Pressure Upto 800 Psi • Length 200 Cm • Sterile , Urine Collecting Bag For New Born /Paediatric Urine Collection Bag, Capacity 100Ml • Should Have Suitability For Both Male And Female Patients • Should Be Provided With Adhesive For Fixation And Good Grip With Minimal Risk Of Allergy And Injury • Capacity 100 Ml • Sterile , Umbilical Catheter (For New Born) All Sizes • Radio Opaque Line • With Female Flexible Mount • Colour Coded Connector • Open Tip Should Be Soft, Rounded, Atraumatic • Length 40 Cm , Umbilical Cord Clamp • Suitable For Clamping Umbilical Cord Of New Born • Security Lock To Prevent Accidental Opening After Clamping • Grooved Clamping Area , Absorbable Oxidized Regenerated Cellulose Net Size 2X 3 With Surgical Sponge Topical Absorbable Haemostatic Bactericidal Property , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) • Option To Use One Or Two Catheters Simultaneously • Bellow Chamber With Capacity 800 Ml • Bellow Unit With Connector • Graduated Bellow • Connecting Tube With Clamp And YConnector • Curved Needle / Trocar With Catheter • Multiperforated Catheter / Radon Drain With Radio Opaque Line • Catheter 16 Fg , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) • Option To Use One Or Two Catheters Simultaneously • Bellow Chamber With Capacity 800 Ml • Bellow Unit With Connector • Graduated Bellow • Connecting Tube With Clamp And YConnector • Curved Needle / Trocar With Catheter • Multiperforated Catheter / Radon Drain With Radio Opaque Line • Catheter 18 Fg , Bone Cement With Antibiotics,Fast And Slow Setting , Sanitary Napkin, Beltless 1. Covering - Covering Of The Absorbent Filler Shall Be Good Quality Knitted Sleeve Or Non-Woven Fabric Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet The Absorbency Requirements. The Napkins Shall Have A Non Absorbent Barrier On One Side Which Shall Have An Identifying Mark Indicating The Side Of The Barrier. 2. Absorbent Filler - The Filler Material Shall Consist Of Cellulose Pulp/ Wadding, And Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material, Etc. 3. Back Strip - A Back Strip For Sticking The Sanitary Napkin Onto The Underwear Should Be There Using Good Quality Adhesive Material. 4. Size - The Size Of Absorbent Section / Complete Sanitary Napkin Shall Be As Follows: ( In Mm) Absorbent Section Total Pad Length 210 +_ 10 230 +_ 10 Width 60 To 75 70 To 85 Thickness 8 +_ 2 5. Weight : Not More Than 10 Gm . . Instruction For Usage Should Be Mentioned On Every Packet , Sanitary Napkin, Belttype 1. Covering - Covering Of The Absorbent Filler Shall Be Good Quality Knitted Sleeve Or Non-Woven Fabric Which Has Sufficient Porosity To Permit The Assembled Napkin To Meet The Absorbency Requirements. The Napkins Shall Have A Non Absorbent Barrier On One Side Which Shall Have An Identifying Mark Indicating The Side Of The Barrier. 2. Absorbent Filler - The Filler Material Shall Consist Of Cellulose Pulp/ Wadding, And Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material, Etc 3. Size - The Size Of Absorbent Section / Complete Sanitary Napkin Shall Be As Follows: ( In Mm) Absorbent Section Pad Length 220 +_ 10 Width 70 +_ 5 Thickness 17 +_ 3 4. Weight : 12 +_ 3 Gm 5. Pack - Six Napkins In A Pack. 6. Elastic Belt With Loops Shall Be Provided In Each Pack. 7. Absorbency: The Napkin Should Be Able To Absorb Not Less Than 30 Ml Of Normal Saline Or Coloured Water Or Test Fluid When Poured On To The Centre Of The Napkin At The Rate Of 15 Ml Per Minute. .Instruction For Usage Should Be Mentioned On Every Packet. , Oxygen Mask (Adult) • Mould Facemask With Adjustable Elastic Strap For Proper Position Of Mask On The Mouth And Nasal Area • Friendly Soft Medical Pvc Material With Comfortable Fitting. • Aluminium Nasal Clip Provides Better Fixation. • Anatomical Design Provides Lighter Seal. • Latex Free Elastic Strap Available. , Oxygen Mask (Paediatric) • Mould Facemask With Adjustable Elastic Strap For Proper Position Of Mask On The Mouth And Nasal Area • Friendly Soft Medical Pvc Material With Comfortable Fitting. • Aluminium Nasal Clip Provides Better Fixation. • Anatomical Design Provides Lighter Seal. • Latex Free Elastic Strap Available. • Mask Connector 4M , Sterile Catheter, Single Use, For Urinary Drainage(Foley Baloon Catheter), 2 Way, Size 14 • Made Of Silicone Elastomer Bonded With Latex • Should Have Hard Plastic Valve • Smooth Distal End With Smooth Eyes For A Traumatic Intubation • Symmetrical Foley Balloon • Balloon Capacity 30+- 1 Ml • Should Conform To Is 11497 • Color Coding Marking To Identify Size • Length, Wall Thickness And Ballon Capacity Should Be Mentioned As Per Is 11497 • Specification For B,C,D,E,F,G Should Be Mentioned As Per Is 11497 , Nelaton - Catheter Size 14 Fg Distal End Is Close And Proximal End Has Female Colour Code Connector • Soft, Kink Resistant Medical Grade Pvc Tube • Length:40 Cm • Individually Packed In Poly And Sterile , Ecg Electrode •Reliable Trace, •High Conductivity,• Easy To Handle , Surgical Blade Sterile, Size 23 • Single Peel Pack In Metal Foil • The Tip Of The Blade Shall Be Well Defined, Central And Sharp. There Shall Be No Waviness, Jags, Feathers, Nicks, Or Other Defects On The Cutting Edge. The Surfaces Of The Blade Shall Be Smooth And Free From Tool Marks And Any Sign Of Corrosion. • Should Conform To Is 3319 , Sterile Hypodermic Syringe With Needle Attached, 22G, Single Use - 50 Ml • Clear Transparent Chamber • Prominent Graduation • Inert Material Gasket At The Piston To Minimise Friction During Movement & Prevent Leakage And Back Flow • Sharp Needle Ensuring Minimum Trauma During Penetration • Shall Conform To Is 12050 • Packing: Needle Should Be Attached With The Syringe And Packed In Unit Ribbon Pack • The Words Destroy After Single Use Or Equivalent Should Be Written On Unit Container. , Urethral Catheter 90 (Fg-14), Made Up Of Medical Grade Pvc , Urethral Catheter 91 (Fg-10), Made Up Of Medical Grade Pvc , Vaccum Suction Set, 2.5 Meter Length, •Suction Handle With Suction Tube •Sterile,• Pyrogenic Free, •Latex Free,• Single Use , Epidural Minipack 18G, 90 Mm, Metal Stylet For Single Use Only, •Sterile, •Epidural Catheter 20G, L 90 Cm, •6 Lateral Holes Closed End, •Borst Adapter •Epidural Catheter Flat Filter 0.2 Micro Meter •Thread Assist Guide•Lor (Loss Of Resistance) Plastic Syringe 6 Ml , Vascular Catheter 16G/5Fr, Double Lumen Length 40Cm.Usfda/ Four Digit Notified Ce Approved, Should Have Two Guide Wire 45Cm & 80Cm Or More (Logline Iv.) Peel-Away Sheath Glide Thru 5Fr*10 Cm, Guide Wire Nitinol 80 Cm, Guide Wire Nitinol 45 Cm Introducer Needle 21 G *7 Cm, Syringe - 10 Ml Tuer-Lock, Skin Protectant Prep Pad, Second Site Adjustable Hub, Measuring Tape, 5 Fr Pressure Injectable Picc Line With Blue Flex Tip 40 Cm, Dressing Statloock Stabilization Device (Suture Less) , Vascular Catheter With Metal Guide Wire, 4Fr Single Lumen, Distalvalve, Saline Flush Only Size 45Cm Or More Usfda/ Four Digit Notified Ce Approved (Logline Iv.) Internal Stylet, Statlock Stabilization Device (Suture Less), Introducer Needle, Micro Introducer With Vessel Dilator, Guide Wire- 50 Cm Nitinol, Safety Scalpel,Suture Wing, End Cap , Vascular Catheter With Metal Guide Wire 3Fr Single Lumen,Micro Introducer,Contrast Media Compatible, Size 45Cm Or More (Logline Iv.) Usfda/ Four Digit Notified Ce Approved Syringe 12 Ml,Internal Stylet,Measuring Tape,Stat Lock Catheter Stabilization Device (Suture Less), Introducer Safety Peripheral Iv Catheter 20G, Micro Introducer With Vessel Dilator,Guide Wire-50 Cm Nitinol,Needle Introducer 21 G, Safety Scalpel, End Cap , Vascular Catheter 7Fr-16 Cm With Chlorhexidine, Silver Sulfadiazine Coated Triple Lumen Usfda/Bis With Testing Standard. Introducer Needle 18 G., Spring Guide Wire 45 Cm J Tip, Dilator 8.5 Fr., Raulerson Spring Introduction Syringe 5 Ml , Vascular Catheter 5Fr/16G, Double Lumen Length 50Cm.Usfda/Four Digit Notified Ce Approved. Should Have Two Guide Wire 45 Cm & 80Cm Or More(Logline Iv.) Peel-Away Sheath Glide Thru 5Fr *10 Cm, Guide Wire Nitinol 80 Cm, Guide Wire Nitinol 45 Cm, Introducer Needle 21 G *7 Cm, Syringe-10 Ml Luer-Lock, Skin Protectant Prep Pad, Second Site Adjustable Hub, Measuring Tape,5 Fr Pressure Injectable Picc Line With Blue Flex Tip 50 Cm, Dressing Statloock Stabilization Device (Suture Less) , Vascular Catheter 5Fr/16G, Double Lumen Length 55Cm.Usfda/ Four Digit Notified Ce Approved, Should Have Two Guide Wire 45Cm & 80Cm Or More (Logline Iv.) Peel-Away Sheath Glide Thru 5Fr *10 Cm,Guide Wire Nitinol 80 Cm,Guide Wire Nitinol 45 Cm,Introducer Needle 21 G*7 Cm, Syringe-10 Ml Luer-Lock, Skin Protectant Prep Pad, Second Site Adjustable Hub, Measuring Tape,5 Fr Pressure Injectable Picc Line With Blue Flex Tip 55Cm, Dressing Statloock Stabilization Device (Suture Less) , Vascular Catheter With Metal Guide Wire 5Fr Double Lumen, Introducer Safety Piv Catheter20g, 45Cm Or More (Logline Iv.) Usfda/ Four Digit Notified Ce Approved Syringe 12 Ml, Internal Stylet, Measuring Tape, Stat Lock Catheter Stabilization Device (Suture Less), Introducer Safety Peripheral Iv Catheter 20G,Micro Introducer With Vessel Dilator,Guide Wire-50 Cm Nitinol,Needle Introducer 21 G,Safety Scalpel, End Cap , Vascular Catheter With Metal Guide Wire,5Fr Triple Lumen, Size Range 55Cm Or More (Logline Iv:) Usfda/Four Digit Notified Ce Approved Syringe 12 Ml, Internal Stylet, Measuring Tape, Stat Lock Catheter Stabilization Device (Suture Less), Introducer Safety Peripheral Iv Catheter 20G,Micro Introducer With Vessel Dilator, Guide Wire-50 Cm Nitinol, Needle Introducer 21 G, Safety Scalpel,End Cap , 3 Way Stop Cock , Non Pyrogenic & Single Use, Should Be Leak Proof, With Smooth Movements , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 10 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 50 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 100 Cm (Non Pyrogenic & Single Use) , 3 Way Stop Cock With Extension Tube (Vein -O-Line) Size 150 Cm (Non Pyrogenic & Single Use) , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 16) • Graduated Bag, • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Abdominal Drain Kit, Sterile, Having Drainage Catheter And Collection Bag (2000 Ml) (Size 20) • Graduated Bag • Should Have Well Fitting Cap • Soft Drainage Catheter 50 Cm Long, With Radio Opaque Line • Rounded Open Distal End With Smooth Atraumatic Eyes In Catheter • Catheter With Markings At 2 Cm Interval , Nasal Pronge Neonatal (Flexible Medical Grade, 2 Meter Long, Multichannel Kink Resistance Tube , Elastic Adhesive Bandage Bp 1M X 10Cm Adhesive Material Should Have Good Quality Sticking Property, Non-Allergic , Sterile Disposable (Single Use Teflon/Ptfe I.V Cannula With Integrated 3 Way Stop Cock Size 26G · Should Be Packed In Transparent Single Blister Pack · Should Confirm To Is 10555 Standard · (Neonatal Iv Cannula Size 26) , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Large Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Ventilator Without Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Medium Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Ventilator Without Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Large Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Bipap With Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Adult · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads For Adults In Medium Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear. · Should Be Single Use For Bipap With Vent · Non Allergic, Leak Proof, Contour Should Be Maintained , Niv Mask (Noninvasive Ventilation Mask) Paediatric · Should Be Light Weight Silicon Based Full Face & Nasal Mask With Face &Forehead Soft Cushion Pads In Small Size. · Should Be With Ergonomically Designed Clips/Straps For Easy Disengagement Of The Head Gear · Should Be Single Use With Bronchoscopy And Co2 &O2 Port With Chin Support · Non Allergic, Leak Proof, Contour Should Be Maintained , Nebulization Mask Adult , Nebulization Mask Paediatric , Chemotherapy Port &Non-Coring Needles(Adult) · Valved Catheter Need Only Saline Flush, Catheter With Intermediate Size Port With Small Septum And Silicon Filled Suture Holes, Should Be Mri Compatible With Cathlock Radio-Opaque Ring. 8Fr With Silicon Material With Peel Apart Percutaneous Introducer System. · Chemo Port Huber Needle 20G And 22G. , Chemotherapy Port &Non-Coring Needles(Pediatric) Valved Catheter Need Only Saline Flush, Catheter With Intermediate Size Power Port With Large Septum And Silicon Filled Suture Holes, Should Be Mri Compatible With Cathlock Radio-Opaque Ring. 6Fr With Silicon Material With Peel Apart Percutaneous Introducer System Chemo Port Huber Needle 20G And 22G. , Core Biopsy Instrument With Compatible Co-Axial Needle (Automatic Disposable) , Bone Marrow Biospy Needle , Eyelid Occlusion Dressings Use For Eyelid , Eye Pressure Shield , Nonabsorbable Polypropylene Light Weight Macroporous Mesh. Usfda/Ce Certificate With Nnotified Body. , Three Dimensional Monofilament Polyester Composite Mesh With Collagen With Glycerol Anti Adhesive Barrier Visceral Side And Stay Suture In Parietal Side Along With Medial. Circular Usfda/Ce Certificate With Notified Body , Three Dimensional Monofilament Polyester Composite Mesh With Collagen With Glycerol Anti Adhesive Barrier Visceral Side And Stay Suture In Parietal Side Along With Medial. Circular Usfda/Ce Certificate With Notified Body , Absorbable 5 Mm Hernia Mesh Fixation Device 30 Screw Shaped With Proximal Wings Of Pgla Tacks Of 4-5 Mm (Should Not Be More Than 5Mm) Length Along With Flexible Shaft Up To 3 Cm. Circular Usfda/Ce Certificate With Notified Body , Absorbable 5 Mm Hernia Mesh Fixation Device 15 Screw Shaped With Proximal Wings Of Pgla Tacks Of 4-5 Mm (Should Not Be More Than 5Mm) Length Along With Flexible Shaft Up To 3 Cm.Circular Usfda/Ce Certificate With Notified Body , Non Absorbable 5 Mm Hernia Mesh Fixation Device With 30 Helical Shaped Titanium Tacks 3.96 Mm Width And 0.61 Mm Diameter Usfda/Ce Certificate With Notified Body. , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Light Weight Monofilament Polypropylene Mesh, Design To Confirm Inguinal Anatomy, 3D Shape , Linear Cutter 55Mm With Six Rows, 3D Staple Formation, Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only , Linear Cutter 75Mm With Six Rows, 3D Staple Formation, Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only , Universal Linear Cutter Cartridge 75Mm Open Linear Cutter Compatible With Selectable Staple Height Linear Cutter 75Mm.Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only. 6 Rows 3-D Staple Technology. , Universal Linear Cutter Cartridge 55-60 Mm For Open Linear Cutter Compatible With Selectable Staple Height Linear Cutter 55-60 Mm.Option Of Closed Staple Height Of 1.5Mm/1.8Mm/2Mm In One Cartridge Only. 6 Rows 3- D Staple Technology. , Curved Cutter Stapler 40 Mm Linear Cutter Or Curved Shaped Radial Stapler Cartridge For Simultaneous Cutting And Stapling , Curved Green Cartridge Having Close Staple Height Of 2.0 Mm, Tactile Feedback On Completion Of Firing Sequence, New Anvil, Knife With Every Catridge , Circular Stapler 33Mm With Controlled Tissue Compression With Adjustable Staple Hight (1.5-2.2 Mm) For Controlled Tissue Compression Longer Staple Leg 5.2 Mm To 5.5Mm , & Non Slip Grip Surface , Laparoscopic Cartridge For Stapler 60 Mm Blue, 1.5 Mm Closed Staple Height With Gripping Surface Technology And Six Rows Compatible With All Range Of Endoscopic Linear Cutter 60Mm , Laparoscopic Cartridge For Stapler 60 Mm Green, 2.0 Mm Closed Staple Height With Gripping Surface Technology And Six Rows Compatible With All Range Of Endoscopic Linear Cutter 60Mm , Procedure For Prolapse And Hemorrhoids Stapler 33Mm - Hemorrhoidal Stapler Kit Consists Of 33Mm Hemorrhoidal Circular Stapler (With Fixed Anvil, Adjustable Closed Staple Height From 0.75 Mm - 1.5 Mm, Staple Open Leg Length Of 4.0Mm - 5.5 Mm), Suture Threade, Circular Anal Dilator, Purse-String Suture Anoscope, Suture For Purse String. , Optically Guided Bladeless Trocar 12Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula To Enhance Abdominal Wall Retention, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer, 150Mm Length. , Optically Guided Bladeless Trocar 12 Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer Length 100Mm. , Facial Closure Device Contain - Optical Bladeless Trocar With Facial Closure Device Comaptible With Clear Cannula Have Two Side Opening Meant For Uniform Port Closure , Varied Staple Height Reloads/Cartridges For 60 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Purple Varied Staple Height Of 3, 3.5 And 4Mm Leg Length , Varied Staple Height Reloads/Cartridges For 80 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Purple Varied Staple Height Of 3, 3.5 And 4Mm Leg Length , Linear Cutter With Varied Staple Height, Tri-Staple Technology-Enabled Reloads Integration With Left And Right Firing Knob(Both Side Firing) ,Linear Cutter Stapler With Integrated Gap Control Technology In 60 Mm Tristaple Gia Stapler, Compatible With Tri-Staple Gia 60 Mm Open Linear Cutter Reloads/Cartridges Purpule And Black , Eea Circular Stapler Purple Colour Medium Thick , Triple Row With Tristaple Technology (Three Row Of Staple Inner To Outer Row 3.0,3.5 And 4.0 Mm With Sloped Cartridges Face In One Stapler) Diameter 31Mm , Linear Cutter With Varied Staple Height, Tri-Staple Technology-Enabled Reloads Integration With Left And Right Firing Knob(Both Side Firing) ,Linear Cutter Stapler With Integrated Gap Control Technology In 80 Mm Tristaple Gia Stapler, Compatible With Tri-Staple Gia 80 Mm Open Linear Cutter Reloads/Cartridges Purpule And Black , Wound Protector With Double Ring In Medium 5-9 Cm , Endo Catch Specimen Removal Kit:With Continuous Ring ,Polyurethane Pouch With 34.5 Cm Shaft Length , 10Mm With Leakproof And Impervious Material To Cancer Cells Of 0.5 Microns/ Pretied Purse String On Pouch Usfda Approved , Disposable Laparoscopic Clip Applier Preloaded With 15/16 Clips, 5Mm Diameter With Clip Logic Technology/Over Load Mechanism And Digital Display/Clip Indicator Titanium Alloy Clips- U Shaped. , Laparoscopic Liner Cutter Without Integrated Fresh Knife With 360*Rotation & 0-45* Articulation In Both Direction : For Use With Cartridges In Sizes Of 45Mm Capable Of Loading All Length Cartridges On Same Gun Only , Laparoscopic Liner Cutter With Or Without Integrated/ Integrated Fresh Knife With 360*Rotation & 0-45* Articulation In Both Direction : For Use With Cartridges In Sizes Of 60Mm, Capable Of Loading All Colour Coding 60Mm Cartridges On Same Gun. , Hand Activated Curved Taper Tip Coagulating Shears Compatible With Ultrasonic Cutting And Coagulation Device,9Cm Length,16Mm Curved Active Blade With Adaptive Tissue Technology Capable Of Sealing Blood Vessels Up To And Including 5Mm In Diameter, With Ergonomic Symmetrical Finger Ring Grip- Focus 9 , Hand Activated Curved Taper Tip Coagulating Shears Compatible With Ultrasonic Cutting And Coagulation Device,17Cm Length,16Mm Curved Active Blade With Adaptive Tissue Technology Capable Of Sealing Blood Vessels Upto And Including 5Mm In Diameter, With Ergonomic Symmetrical Finger Ring Grip - Focus 17 , Advance Bipolar Hand Activated Probe With 5Mm Shaft Diameter And 35 Cm Shaft Length With 5 Mm Wide Straight Jaw Design With Seal Length Of 20Mm And Cut Length Of 16Mm,Sealing Vessel Upto And Including 7Mm Through Radio Frequency Energy And Having A Temperature Controlled Mechanism Within The Jaw And Having Articulation Of 110 Degree(55 Degrees On Both Sides) And Capable Of 360 Degrees Rotation , Advanced Bipolar Tissue Sealer 37 Cms, With 5Mm Shaft Diameter, 24 Mm Jaw Length, 21.8 Mm Cut Length And 13.4 Mm Jaw Aperture Designed For Use In Laproscopic Surgical Procedures With Curved And Tapered Tip And Uses An Advanced Algorithm For Intelligent And Efficient Energy Delivery. Device To Have Intuitive Design With Separate Seal And Cut Button And 360 Degree Continuous Shaft Rotation , Laparoscopic Shears 5Mm Diameter,36Cm Long, 18Mm Curved Coated Blade And A Clamp Arm With Tissue Pad, Capable Of Cutting,Sealing,Grasping And Coagulating Blood Vessels Up To And Including 7Mm In Diameter, 360 Degrees Rotation, Advance Hemostasis Hand Activation Mode For Sealing Vessels Upto 7Mm In Diameter ,Ergonomic Handle Compatible With Ultrasonic Energy Source, Capable Of Hand And Foot Activation With An Integrated Hand Piece And Transducer. , Connecting Cable For Ultrasonic Harmonic Scalpel For Open Energy Probes Compatible With Focus Plus Shear- Hp Blue , Connecting Cable For Ultrasonic Harmonic Scalpel For Lap Energy Probes Compatible With Ace Plus Shear Hp054 , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Plates - 2 Mm Thickness (2*2 ) Hole Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Plates - 2 Mm Thickness (1*2) Hole Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Plates - 2 Mm Thickness (1*1 ) Hole Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (2 Mm ) Diameter Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (1.5 Mm ) Diameter Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (2.5 Mm ) Diameter Drill Bit Machine With Insertion Tools , Platting For Maxillary Swing And Mandibular Fixation Surgeries (Titanium) Screw- (3 Mm) Diameter Drill Bit Machine With Insertion Tools , Speech Prosthesis For Laryngectomy 22.5Fr (6 Mm) , Speech Prosthesis For Laryngectomy 22.5Fr (8 Mm) , Curved Tip & Stepped Cartridges Face From Inner To Outer Side 2.0,2.5 And 3.0 Mm Staple Heights Row For Variable Thickness Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 45 Mm Tan Colour Code For Vascular Applications , Curved Tip & Stepped Cartridges Face From Inner To Outer Side 3.0,3.5 And 4.0 Mm Staple Heights Row For Variable Thickness Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 45 Mm Purpule Colour Code For Medium To Thick Tissue , Varied Staple Height Reloads/Cartridges For 60 Mm Gia Instruments With Tri-Staple Technology, With The Cutting Knife Blade Incorporated In The Reloads Itself, With Black Varied Staple Height Of 4, 4.5 And 5Mm Leg Length , Synthetic Oxidised Re-Generated Cellulose Double Layered With Peg And Trilysine Size 2*4Cm Or Size 2-3*5- 6Cm , Synthetic Oxidised Re-Generated Cellulose Double Layered With Peg And Trilysine Size 5*10Cm Or Size 5-7*7- 11Cm Or Size 4*8Cm , Disposable 10 Mm Endoscopic Clip Applier With Facility Of Loading Clips Independent Of The Firing Mechanism: Medium/Large Size , Disposable Clip Applier Preloaded With 20 Clips, Superinterlock Security With Clip Design Technology Medium , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Close Wound Drainage Device Under Negative Pressure (Closed Wound Suction Unit) , Urine Collecting Bag, Disposable 2000 Ml With Uroflow Meter , Central Neck Line - Double Lumen (Antimicrobial Coated/ Chlorhexidine , Silver Sulfadiazine Coated) Central Lumen Catheter, Double Lumen) 7 Fr Usfda/Bis With Testing Standard. , Microcatheter For Aneurysm, Two Tip, Outer Diameter-2.1 To 2.4 & 1.7 Fr. Inner Diameter- 0.017 To 0.015. Nitinol Brading, Straight Tip Compatible With 0.014Microwire. It Should Have Radio Opaque Tip & Hydrophilic Coating. , Straight Tip Microcatheter With Four Transtion Zone Proximal Stainless Steel Triple Braid, Distal Segment Stainless Steel With Soft Distal Segment Of 6 Or 10 Cm, Outer Layer Pebax,Inner Layer Of Stainess Steel Braid Coil, Ptfe & Polyolefin Elastomer With Proximal &Distal For Deploying Intracranial Device: Stent Deployment0.027.Id , Straight Tip Microcatheter With Four Transtion Zone Proximal Stainless Steel Triple Braid, Distal Segment Stainless Steel With Soft Distal Segment Of 6 Or 10 Cm, Outer Layer Pebax,Inner Layer Of Stainess Steel Braid Coil, Ptfe & Polyolefin Elastomer With Proximal &Distal For Deploying Flow Divertor Delivery With Single Tip Markar 0.027 Id , Flow Guided Microcatheter Extruded Construction Proximal Size 2.7 F Middle Size 2.4 F Distal Size 1.2 To 1.8 F Working Length 155 To 180. Catheter Endo Hole Diameter 0.009 To 0.13. Compatible With 0.007 To 0.010, It Should Have Radio Opaque Tip & Hydrophilic Coating Compatible With Dmso. , Stinless Steel Hydrophilic Coated 0.14 Neuro Guide Wire With Twister Technology, Microridge Design, Optimized Core Wire Profile 205Cm In Length & Coil Length 5Cm , Aortic Punch 4 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Aortic Punch 4.5 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Aortic Punch 3.6 Length Betwwen 6 To 7 Midlength Diamond Edge Sharp, Dual Cut Edge For Clean Precise Removal Of Aortic Tissue, Conical Tip Or Round / Eliptical Tip For Easy Insertation By Straight Or Button Hole Tech, Should Have Long And Short Handle Confirguaration, Sterile Packing , Laproscopic Port With Trocar 5Mm Optically Guided Bladeless Trocar 5Mm With Bilateral Tissue Separators, Optical Tip To Eliminate Blind Entry, Clear Ribbed Cannula To Enhance Abdominal Wall Retention, Recessed Stopcock Valve, Funnel Shaped Housing, Duckbill Secondary Seal, Integrated Universal Seal That Eliminates The Use Of Reducer, 150Mm Length. , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needle Should Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode-Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. 14G X 11Cm To 20Cm , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needle Should Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode- Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. (Size 18Gx11cm Or Above) , Programmable Automatic Biopsy Gun With Compitible Co-Axial Needle Should Have 20Mm Sample Notch And Thin Wall Cannula For Larger Core And Echogenic Making On Both Stylet Tip And Cannula For Improved Visibility During Procedure. Should Have Three Programmable Firing Mode- Automatic Mode, Delay Mode And Zero Throw Mode. Should Have Two Firing Btton On Surface Of The Gun, Size 12G, 14G, 16G, 18G, 20G With Length 11Cm, 15Cm, 20Cm. Should Come With Compitible Coaxial Packed With Biopsy Gun. Usfda Approved. (Size 18Gx15cm Or Above) , • Incise Drape Made Up Of Polyester Film With An Acryllc Adhesive That Contains A Complex Of Lodoform (N- Vinyl 2 Pyrrolldine) With A Lodine Concentration Of 0.092 Mg Lodine/Cm2. • Film Should Be Breathable And Conformable To Skin, Compatible With Povidone And Chg Skin Preps. • Lodine From The Drape Should Be Present In The Deepest Skin Layers (1000 Microns Depth) Where Hair Follces Exist Apart From Killing Microbes On Skin Layer. • Produst Should Be Registered As A Class ‘D Medical Devise With Cdsco India Since ItS A Antimicroblal Product. • It Should Be Gamma Sterile And Us-Fda Approved. Size Should Be 56Cm 45Cm (Adhoslve Area) , Rem (Return Electrode Monitoring) Single Use, Corded Patient Return Electrodes Conductive Adhesive Hydrogel With Usfda , Surgical Gloves 6.5 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Surgical Gloves 7 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Surgical Gloves 7.5 Non Latex Surgical Gloves Synthetic Polyisoprene Powder Free Overall Length 283Mm With Puncture Indicator Technology Usfda Approved , Ionic Silver Highly Absorbent Multilayer Foam Dressing With Broad Spectrum Antimicrobial , Bactericidal Efficacies And Having A Soft Siliconadhesive Wound Contact Layer , Providing Sustain Release Of Silver Upto 7 Days. Size: 10 Cms X 10 Cms And More , Self-Adherent Moist Wound Foam Dressing Made Up Of Multilayer Matrix With Soft Silicon Adhesive Layer For Pressure Ulcers/Bed Sores At Sacrum 16 Cms X 20 Cms And More , Double/Single Wall Resuscitator With Peep Valve In Adult (Double Wall Resuscitator With Peep Valve In Adult It Should Be Fully Autoclavable Double Wall With Hand Strap It Should Be Supplied With Autoclavable/Eto Reservoir Bag It Should Have A Single Shutter Valve System Made Of Silicone Rubber It Should Have Easy Attachment Of Peep Valve For Adult Bag Volume: Mark Iv (1300 Ml Or More) Weight: Adult (415 G) And More It Should Be Us-Fda, Ce & Iso Certified Adult , Double Wall Resuscitator With Peep Valve In Paediatrics It Should Be Fully Autoclavable Double Wall With Hand Strap It Should Be Supplied With Autoclavable Reservoir Bag It Should Have A Single Shutter Valve System Made Of Silicone Rubber It Should Have Easy Attachment Of Peep Valve For Adult & Peadiatric It Should Have Provision To Attach Manometer For Paediatrics Ambu Bag Bag Volume: Mark Iv Baby (300 Ml) Weight: Baby (190 G) It Should Be Us-Fda, Ce & Iso Certified , Single Patient Use Sebs Resuscitator (With Peep Valve In Neonatal 220-300Ml) • It Should Be Single Use Resuscitator Made To Sebs Material Not Pvc. • It Should Have Unique Single-Shutter Valve System For Reliable Functionality & Swivel Between Valve And Mask Permits 360° Positioning In Relation To The Patient • It Should Have Thin-Walled Compression Bag With Hand Strip. • Resuscitator Volume: Neonate(220-300Ml) • (Including Reservoir And Mask) • It Should Be Ce/Iso/ Us Fda Certified. Or As Per Who Specification. , Pre-Formed Sga With Gastric Access & Intubation It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Pre-Formed Sga With Gastric Access & Intubation It Should Be Latex Free Preformed Laryngeal Mask Having Gastric Access Channel And Should Be Used As A Conduit For Direct Endotracheal Intubation With Any Brand Ett • It Should Built-In, Anatomically Correct Curve And Cuff & Tube Moulded As A Single Unit. • Ultra-Thin Pilot Balloon With Tactile Indication Of Degree Of Inflation. • Universal 15Mm Connector (Iso). • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sga • It Should Be Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sga • It Should Be Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Silicone Pre-Formed Sga • It Should Be Autoclavable Up To 40 Times • It Should Have Reinforced Tip At Cuff And Cuff & Tube Moulded As A Single Unit. • Atraumatic Insertion And Removal. • It Should Be Ce/Iso, Us Fda Certified , Offset Connector Cardio Sensor Electrodes • It Should Have High Conductive Wet Gel To Ensure Reliable Traces. • It Should Be Design With Offset Connector To Prevent Artefacts From Disrupting The Readouts • It Should Have High Quality Ag/Agcl Sensor To Ensure Excellent Trace Quality • It Should Have Size Not More Than 72 X 68 Mm • • Sizes -Adult , Disposable Sga Anatomical Curve • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Disposable Sga Anatomical Curve • It Should Have Special Curve That Carefully Replicates Natural Human Anatomy • It Moulded Directly Into The Tube • Should Have A D-Shaped Airway Tube To Give A Firm And Ergonomically Grip During Insertion , Ultrasorbs Ap Disposable Drypads, Dry Pad For Moisture Management, 58.4X90cm, With Breathable Layer, Super Absorbent Core, Aqua Shield Film And Air Permeable Back Sheet, Absorbency Of 1800-2300Gm, Usfda/Ce/Bis Compliant, Iso13485 Compliant , Over-The-Ear Nasal Cannula Over-The-Ear Nasal Cannula With Star Lumen, 50 Tubing, Must Be Flexible Contoured Lip Tab Provides A High Level Of Stability And Patient Comfort. Over-The-Ear Design For A Comfortable And Secure Fit, Crush- And Kink-Resistant Tubing. Usfda/Bis With Testing Standard. , Pediatric Nasal Cannula Pediatric Nasal Cannula Softech With Universal Oxygen Connector, 7 Star-Lumen Tubing Lightweight, Flexible Nasal Cannula With Standard Over-The-Ear Designed That Optimizes Fit And Stability, Soft Nasal Prongs Help Maximize Patient Comfort. Individually Packaged For Convenience And Sterility. Manufacturer Must Be Usfda Registered / Certified With En/Eu Iso 13485 / Applicable 510K & Ce Certification. , Volumetric Incentive Spirometer (Adult) Volumetric Incentive Spirometer (Adult) 4000 Ml And Above With Handle. Volume Measurement Must Be Compact Comfortable Designed To Accommodate Large Inspired Volumes. Must Have Good-Better-Best Flow Window & Advanced, Low Work-Of-Breathing Design. Particulate Filter Screen In Device Housing Must Help To Reduce Risk Of Foreign Matter Passing To Patients. Expandable And Collapsible Tube Must Help Patients Find Comfortable Position For Treatments And Can Be Removed When Storing The Device. Ergonomic Swiveled Mouthpiece Allows To Patients Create Tight Seal To Enable More Accurate Measurement. Flow Indicator With Smiley Face Provides Visual Target For Desired Inhalation And Bright Green Flow Indicator Make It Easy For Patients To See Results. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification , Volumetric Incentive Spirometer (Pediatric) Volumetric Incentive Spirometer (Pediatric) 2500 Ml With Handle. Volume Measurement Must Be Compact Comfortable Designed To Accommodate Large Inspired Volumes. Must Have Good-Better-Best Flow Window & Advanced, Low Work-Of-Breathing Design. Particulate Filter Screen In Device Housing Must Help To Reduce Risk Of Foreign Matter Passing To Patients. Expandable And Collapsible Tube Must Help Patients Find Comfortable Position For Treatments And Can Be Removed When Storing The Device. Ergonomic Swiveled Mouthpiece Allows To Patients Create Tight Seal To Enable More Accurate Measurement. Flow Indicator With Smiley Face Provides Visual Target For Desired Inhalation And Bright Green Flow Indicator Make It Easy For Patients To See Results. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Mask For Tracheostomy Adult Mask For Tracheostomy And Laryngectomy Aerosol Therapy Tubing Connector Must Swivels 360° For Ease Of Positioning; 22 Mm Od Connector Accepts 22 Mm, Corrugated Tubing And Nebulizer Tees. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Pardiatric Mask For Tracheostomy Pediatric Mask For Tracheostomy And Laryngectomy Aerosol Therapy Tubing Connector Must Swivels 360° For Ease Of Positioning; 22 Mm Od Connector Accepts 22 Mm, Corrugated Tubing And Nebulizer Tees. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Elongated Aerosol Mask Adult Elongated Aerosol Mask Adult With Under-The-Chin Design For Excellent Fit On Wide Range Of Face Sizes Must Be Clear, Soft Vinyl For Patient Comfort; Adjustable Nose Clip Assures Comfortable Fit; Specifically Designed For Aerosol Therapy; Must Be With Supplied With 6Ft -7Ft. Corr A Flex Corrugated Tubing, Featuring Cuttable Sections Every 6 In. Usfda/Bis With Testing Standard. , Adult Conventional Single Water Trap Adult Conventional Single Water Trap (Non-Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 72 In. Long, Standard Ventilator Circuit With Straight Connector Inspiratory Limb Water Trap (For Use With Hmes Only). Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Conventional Single Water Trap Adult Conventional Single Water Trap (Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 72 In. Long, Standard Ventilator Circuit With Straight Connector Inspiratory Limb Water Trap (For Use With Hmes Only). Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Ventilator Circuit Single Limb Portable Adult Ventilator Circuit With Universal Single Limb. Must Be Complete Kit With Main Circuit Hose, Exhalation Valve Manifold, Aerosol Hose, Patient Elbow Connector, Proximal Airway Pressure Line, Exhalation Valve Line, And Humidifier Limb. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Adult Ventilator Circuit Single Water Trap Adult Conventional Single Water Trap (Non-Heated) Ventilator Circuits Are Available In A Variety Of Different Configurations And Styles.To Incorporate Standard Connectors For Use With A Variety Of Ventilators, Ported Wyes Allow Pressure Sensing And Temperature Monitoring And Include Tethered Caps, All Adult Conventional Circuits With 70-72 Inch. Long, Standard Ventilator Circuit With Straight Connector Inspiratory Limb Water Trap (For Use With Hmes Only). Manufacturer Must Be Us- Fda/ Eu Ce Four Digit Notify/ Iso , Infant Prong Cpap Cannula Infant Prong Cpap Cannula Nasal Size 0 With Designed To Reduce Trauma Associated With Delivery Of Infant Nasal Cpap. Must Be Soft Siliconised, Anatomically Curved Prongs To Enhance Fit. Luer Fitting On Expiratory Connector To Allow Proximal Airway Pressure Monitoring. Each Set To Include, Soft Siliconised Cannula; Inspiratory & Expiratory Elbow Connector; Knit Cap; Two 6 In. Hook And Loop Fastener Sections; Two 10 To 7.5 Mm Adaptors. Manufacturer Must Be Usfda Registered / Certified With En/Eu Iso 13485 / Applicable 510K & Ce Certification. , Fhme Heat And Moisture Exchangers With Bacteria Viral Filters Bacterial Filtration Efficiency≫ 99.99 % And Viral Filtration Efficiency ≫ 99.9999% . Filter Membrane Should Be Of A Hydrophobic Non-Woven Polypropylene Material. Should Be Tailored To Meet The Specific Needs Of Both Anaesthesia And Intensive Care. , Tracheostomy Hme: 1 Heat And Moisture Exchangers For Spontaneously Breathing Tracheotomy Patients. 2 Should Have In Built Oxygen Port. 3 Should Be Compact & Light Wt. 4 Should Be Suitable For Ambulatory Patients, Sampling And Suctioning Can Be Done Without Removing It. 5 The System Should Have Kink Resisting Oxygen Tubing , Double Lumen Endobronchial Tube Left: Size-37Fr Low Pressure Tracheal And Bronchial Cuffs To Minimise Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fiberoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Double Lumen Endobronchial Tube Left: Size-39Fr Low Pressure Tracheal And Bronchial Cuffs To Minimise Risk Of Mucosal Damage. Color Coded Bronchial Cuff, Bronchial Proximal Lumen And Bronchial Pilot Balloon Assists In Location Of Tube And Tip When Verification Is Confirmed By Fiberoptic Bronchoscope. X-Ray Opaque Markers At Distal Tip Above Bronchial Cuff And At Tracheal Opening For Verification Of Tube Position. , Manifold Manifolds In 2, 3, 5 Port With Configuration Of Left-Right Orientation, On-Off Handle, Full-Half Body, 200 Psi-500 Psi Rating And Wide Port Spacing. Should Have Clear Polycarbonate Body To Provide Durability And Visibility, Airless Rotator And Large Bore Inner Lumen Throughout Including Rotator Usfda + Ce/ Dgci Or Usfda/Bis With Testing Standard. , High Pressure Tube High Pressure Tubing In 25Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda + Ce/ Dgci Or Usfda/Bis With Testing Standard. , High Pressure Tube High Pressure Tubing In 51Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda + Ce/ Dgci Or Usfda/Bis With Testing Standard , High Pressure Tube High Pressure Tubing In 76Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda + Ce/ Dgci Or Usfda/Bis With Testing Standard , High Pressure Tube High Pressure Tubing In 122,Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi Usfda/Bis With Testing Standard , High Pressure Tube High Pressure Tubing In 183Cm With Braided, Flexible Tubing Of Polyurethane Rated 1200 Psi. Usfda + Ce/ Dgci Or Usfda/Bis With Testing Standard , Torque Device Torque Device For .014 To .038 Standard And Hydrophilic Guide Wires With Squeeze-Load- Release Mechanism.Usfda Approved , Radial Band Radial Hemostatis Band In 24 Cm . Curved Backer Plat With Large Area & Clear Unobstructed Site Visibility, Convinient Tubing Clip With Two Check Valve Options And Device Stickers. Should Be Available With Standard Luer And Specialized Connection Syringe. Us Fda Approved , Radial Band Radial Hemostatis Band In 29 Cm. Curved Backer Plat With Large Area & Clear Unobstructed Site Visibility, Convinient Tubing Clip With Two Check Valve Options And Device Stickers. Should Be Available With Standard Luer And Specialized Connection Syringe. Us Fda Approved , Angiography Needle Angiography Needle In 18G, Length Of 2-9Cm. Should Be Available In Echo Enhanced & Smooth Finish, Ergonomic Hub With Bevel Orientation Point, Silicone Coated Stainless Steel To Reduce Needle Drag And Superior Sharpness To Facilitate Entry Into Tissue And Vessel Wall. Usfda Approved , Angiography Needle Angiography Needle In 20G, Length Of 2-9Cm. Should Be Available In Echo Enhanced & Smooth Finish, Ergonomic Hub With Bevel Orientation Point, Silicone Coated Stainless Steel To Reduce Needle Drag And Superior Sharpness To Facilitate Entry Into Tissue And Vessel Wall. Usfda Approved , Angiography Wire Ptfe Guidewire In .035, .038, In Regular Length. Should Have 3Mm J-Tip, Straight Tip, Pre-Coating For Smooth Surface With Less Friction, Finger Straight-Able With Precise J-Tip Memory And Packed In Flush Hoop With J Straightener. Should Have Option Of Fixed Core, Movable Core, Heparin Coating, 1.5Mm J-Tip. Usfda Approved , Angiography Wire Long Length Ptfe Guidewire In .035, .038, With Exchange Length. Should Have 3Mm J-Tip, Straight Tip, Pre-Coatting For Smooth Surface With Less Friction, Finger Straight-Able With Precise J-Tip Memory And Packed In Flush Hoop With J Straightener. Should Have Option Of Fixed Core, Movable Core, Heparin Coating, 1.5Mm J-Tip. Usfda Approved , H10ydrophilic Wire Long Length Hrophilic Guidewire Of .018, .025, .035, .038 In 150-180Cm Length With Straight, Angled Tip. Should Come In Stiff & Standard Configuration, Nitinol Core Polyurethane Jacket Hydrophilic Coated Guide Wires With Radiopaque Jacket For Enhanced Visibility, Hydrated Gel Coating And True 1:1 Torque. Usfda Approved. , Hydrophilic Wire Long Length Hydrophilic Guidewire Of .018, .025, .035, .038 In 220-260Cm Length With Straight, Angled Tip. Should Come In Stiff & Standard Configuration, Nitinol Core Polyurethane Jacket Hydrophilic Coated Guide Wires With Radiopaque Jacket For Enhanced Visibility, Hydrated Gel Coating And True 1:1 Torque. Usfda Approved. , Hydrophillic Braided Sheath Hydrophilic Braided Sheath Introducer In 4F To 7F, Length: 7Cm, 10-11Cm, 15-16Cm, 23-25Cm Or 7-25 Cm With The Option Of .018, .021, .025 Plastic Jacketed And Spring Coil Guidewire. Should Have Ultra-Thin Wall And Flat Wire Braiding Technology To Provide Support And Low Profile.Usfda Approved , Femoral Sheath With Needle Femoral Sheath In 5F To 8F, Length: 11-25Cm With Puncher Needle Of 18G And Guidewire Of .035, .038. Should Have Rotating Suture Ring, Snap-Fit Dilator To Prevent Slipping During Insertion And Holster Pack. Should Be Available In Polypropylene. Usfda Approved , Angiography Radial Catheters Diagnostic Radial Catheter With Radial Ultimate Curve In 4-6F. Lenght Of 100Cm, 110Cm, 125Cm. Should Have Four Type Of Radial Ultimate Curves. Should Have Flat Wire Braiding, Nylon Material, Thin Wall Design For Higher Flow Rates, Radio-Opaque Tip, Strain Relief And Winged Polycarbonate Hub. Us Fda Approved , One Loop & Triple Loop Snare Snare Kit(2-35Mm Diameter, 90-Degree Nitinol & Gold-Plated Tungsten Loop) And Multiloop Snare Kit(2-45Mm Diameter, Three Interlaced Nitinol Loops) For Foreign Body Retrieval, Should Come With Flexible, Reinforced, Strain Relief Hub To Reduce Buckling And Unique Peel Away Insertion Tool. Usfda Approved , Ptca Kit (1) Three Port Manifold With Knobs To TurnRight When Open (2) One Pressure Line, (3) Fluid Connecting Line, (4) Contrast Connecting Line, (5) One Three Way Stop Cock, (6) One Y-Connector Hemoststic Valve With Spring Type Push And Release Mechanism, (7) One Inflation Device With Manometer Upto 30 Atm (Easy To Operate With Luminescent Dial), (8) One Luer Lock Controlled Syringe Of 10 Ml With Finger Grip, (9) Insertion Needle, (10) Torque Device.Usfda Approved , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material.Sizes Are 5Fr. , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material. Sizes Are 6Fr , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.Separate Y Connectors Available For Different Tubes In The Pack.Catheter Is Made Up Of Medical Grade Silicon Material. Sizes Are 7Fr. , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning. Separate Y Connectors Available For Different Tubes In The Pack. Catheter Is Made Up Of Medical Grade Silicon/ Poly Urethane Material. Sizes 8Fr. Usfda/ Notified Ce Approved , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning.S Eparate Y Connectors Available For Different Tubes In The Pack. Catheter Is Made Up Of Medical Grade Silicon/ Poly Urethane Material. Sizes Are 10Fr. Usfda/ Notified Ce Approved , Closed Suction Catheter For Paediatrics Number And Color- Coded Graduations For Controlled Depth Suctioning. Separate Y Connectors Available For Different Tubes In The Pack. Catheter Is Made Up Of Medical Grade Silicon/ Poly Urethane Material. Sizes 12Fr. Usfda/ Notified Ce Approved , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 3Mm. , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 3.5Mm. , Paediatric Endotracheal Tube Paediatric Microcuff Designed According To The Paediatric Anatomy.Cuff Is Made Up Of Polyurethane,Thickness Of Cuff Is 10 Microns.Microcuff Seals At An Average Cuff Pressure Of 11 Cmh2o.Burst Pressure Of Cuff Is 805Cmh2o.Anatomically Based Intubation Depth Marking With Precision Bands.Cuff With Play Mode Function. Sizes Are 5.5Mm , Kimvent Bal Cath Non Bronchoscopic Bal For Bronchial Aspirate Sampling. Can Be Performed In Minutes At Bedside. Directional Tip Allows Right Or Left Lung Sampling.Maintains Peep When Used With Supplied Ventilator Adapter. Soft, Cushioned, Radiopaque Tip For Safe Sampling. Protected With Outer Catheter Covering. T Size 13Fr . , Kimvent Bal Cath Non Bronchoscopic Bal For Bronchial Aspirate Sampling. Can Be Performed In Minutes At Bedside. Directional Tip Allows Right Or Left Lung Sampling.Maintains Peep When Used With Supplied Ventilator Adapter. Soft, Cushioned, Radiopaque Tip For Safe Sampling. Protected With Outer Catheter Covering. Sizes 16Fr. , Catheter Mount Double Swivel Connector, It Should Have Bronchoscopy Port . It Sholud Be Approved By Us Fda , Gastrostomy Feeding Tube Medical Grade Silicone Construction.Low Profile Design.Tapered Distal Tip,Silicone Internal Retention Balloon.Distal Tip Recessed At 5M.Lproximal Anti Reflux Valve.Secur Lok Extention Set Connector Mechanism, Radiopaque Stripe, Gamma Sterilized Size - 20Fr Length (0.8 - 5.0) , Gastrostomy Feeding Tube Medical Grade Silicone Construction.Low Profile Design.Tapered Distal Tip,Silicone Internal Retention Balloon.Distal Tip Recessed At 5M.Lproximal Anti Reflux Valve.Secur Lok Extention Set Connector Mechanism, Radiopaque Stripe, Gamma Sterilized Size - 24Fr Length (0.8 - 5.0) , Percutaneous Endoscopic Gastrostomy (Peg) 24Fr Percutaneous Endoscopic Gastrostomy (Peg) Medical Grade Silicone Construction.External Retention Ring .Universal And Bolus Feeding Port Connectors,Medication Port.Collapsible Internal Retention Bumper.Radiopaque Stripe And Bumper.Tubing Clamp.Eto Sterilized.Sizes - 24Fr , Anti Microbial Gloves 6 , Anti Microbial Gloves 6.5 , Anti Microbial Gloves 7 , Anti Microbial Gloves 7.5 , Anti Microbial Gloves 8 , Anterior Chamber Iol Pmma Material, Single Piece Kelman Multiflex Design5-6 Mm Optic Size With 12-13 Mm Overall Size Biconvex Power Range +12 To +24Should Be Iso Or Ce Certified. , Capsular Tension Ring Standard Capsular Tension Ringpmma Material With One Eyelet Each At Each End 10 Mm To 12 Mm Overall Diameter Sterile Should Be Iso/Ce Certified Mfg. , Neonatal High Flow Nasal Cannula Having 8 Litre Flow. Should Have Soft Tip . , Pur-Xro Catheter 20 Cm, 28G/1Fr Picc Line With Stylet, Splitting Needle With Securing Wings With 8 Cm Extension Tubing (Flow Rate 0.7Ml/Min) , Pur-Xro Catheter 30 Cm, 24G/2Fr Picc Line With Split Cannula And 10Cm Extension Tubing Over Catheter (Flow Rate 4.5Ml/Min) , Long Introducer Sheath (20-30 Cm Long) (Size 5Fr..) Us Fda + Ce/ Dgci Approved·Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (20-30 Cm Long) (Size 6Fr.) Us Fda + Ce/ Dgci Approved·· Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath (20-30 Cm Long) (Size 7Fr.) Us Fda + Ce/ Dgci Approved·Sheath Should Be Between 20-30 Cm Long· 0.035 Or 0.038 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 4F Us Fda + Ce/ Dgci Approved·Sizes 4 Fr 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 5F Us Fda + Ce/ Dgci Approved·Sizes 5 Fr 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Trans Radial Introducer Sheeths 6F Us Fda + Ce/ Dgci Approved· Sizes 6 Fr 10-20 Cm Long· Pack Must Include 18 G,-21 G, 6-7.5 Cm Long Puncture Needle· 0.025 Inch Guide Wire Compatible· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Long Introducer Sheath Dedicated For Transradial Access Us Fda + Ce/ Dgci Approved· Between 7-11 Cm Long · 0.021 Or 0.025 Inch Guide Wire Compatible · With Haemostatic Valve To Prevent Back Leak And Air Aspiration· Integral Side Port With Attached 3-Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant · With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· With Smooth And Resistance Free Insertion , Ptfe Coated Diagnostic Guide Wire - (Exchange Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Should Be Available In , 0.035 Inches Size· Should Be 240-300 Cm Long· Should Be Available As Straight Or J-Shaped Tip· Should Be Available Fixed As Well As Movable Core. , Hydrophilic Diagnostic Guide Wire - Radifocus Tarumo Type (Regular Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved·Should Be Available In 0.032 Inches Size· Should Have Superelastic Alloy Core· Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 120-300 Cm Long , Hydrophilic Diagnostic Guide Wire - Radifocus Tarumo Type (Regular Length, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Should Be Available In 0.035 Inches Size· Should Have Superelastic Alloy Core· Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 120-300 Cm Long , Radiofocus Miniplastic Guidewire (, Regular Stiffness) Us Fda + Ce/ Dgci Approved· Sould Be Available In 0.035 Inches Size· Should Have Superelastic Alloy Core· Should Have Super Flexible Wire Tip· Should Be Available In Straight And Angled Tip· Should Be Between 150-180 Cm Long , Judkins Catheter (Jr) Right Judkins Diagnostic Catheters In Various Standard Curves And Lengths. , Judkins Catheter (Jr) Right Judkins Diagnostic Catheters In Various Standard Curves And Lengths. , Judkins Catheter (Jr) Right Judkins Diagnostic Catheters In Various Standard Curves And Lengths. , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Left Judkins Catheters Diagnostic In Various Standard Curves And Lengths. , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Left Judkins Catheters Diagnostic In Various Standard Curves And Lengths. , Judkins Catheter (Jl) Us Fda + Ce/ Dgci Approved ·Left Judkins Catheters Diagnostic In Various Standard Curves And Lengths. , Pigtail Us Fda + Ce/ Dgci Approved Left And Right In Various Standard Curves And Lengths. , Pigtail Us Fda + Ce/ Dgci Approved Left And Right In Various Standard Curves And Lengths. , Pigtail Us Fda + Ce/ Dgci Approved Left And Right In Various Standard Curves And Lengths. , Multipurpose Catheter Us Fda + Ce/ Dgci Approved Multipurpose Catheters In Various Standard Curves And Lengths. , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Left (Al) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Left (Al) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Left (Al) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Right (Ar) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Right (Ar) Catheter In Various Standard Curves And Lengths. · , Amplatz Catheter Us Fda + Ce/ Dgci Approved Amplatz Right (Ar) Catheter In Various Standard Curves And Lengths. · , Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. , Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. , Nternal Mammary Catheter 7Fr Internal Mammary Catheter Us Fda + Ce/ Dgci Approved · In Various Standard Curves And Lengths. , By-Pass Graft Catheter 5Fr By-Pass Graft Catheter Us Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths , By-Pass Graft Catheter 6Fr By-Pass Graft Catheter Us Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths , By-Pass Graft Catheter 7Fr By-Pass Graft Catheter Us Fda + Ce/ Dgci Approved, In Various Standard Curves And Lengths. , Transradial Diagnostic Coronary Catheter Tiger Type Diagnostic Coronary Catheters Of Tig Curves And Lengths Dedicated For Trans Radial Coronary Angiography And Brachial Approach Also Us Fda + Ce/ Dgci Approved · , Introducer Sheaths For Pediatric Use (Size 5 Fr.) With J Tip/Straight Introducer Wire Us Fda + Ce/ Dgci Approved· Between 5.5-7.5 Cm Long· 0.021 Inch Straight Introducer Guide Wire· With Haemostatic Valve To Prevent Back Leak And Air Aspiration· With Integral Side Port With Attached 3- Way Stopcock· With Suture Eye For Securing Sheath· Kink Resistant· With Dilator-Hub Lock Mechanism To Prevent Its Back-Out During Insertion· Should Have Smooth And Resistance Free Insertion , Arterial Pressure Monitor Lines (100 Cm Long) Us Fda + Ce/ Dgci Approved·Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements· Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Arterial Pressure Monitor Lines (150 Cm Long) Us Fda + Ce/ Dgci Approved· Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements· Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Arterial Pressure Monitor Lines (200 Cm Long) Us Fda + Ce/ Dgci Approved· Should Be Soft And Kink Resistant· Should Give Reliable Pressure Measurements· Should Have Male Luer Lock Connection At One End And A Female Luer Lock Connection At The Other End· Should Meet Highest Medical Industrial Standards For Arterial Pressure Lines· Quality Certification Should Be Provided From Authorized Agencies. , Angio.Kit/Ptca Kit (3 Port Many Fold With Attached Tubing One Pressure Line + Two Iv Set Connecting Tube And Two Leurlock Syringe ) Us Fda / Ce/ Approved , Venaseal Closure System For Varicose Veins Usa/Fda Approved N Butyl Based Adhesive Formation 50/90/105/120 Cm 145 Cm(3/4/6/8 F ,014/0.35 Compatible , Bone Marrow Biopsy Needle Size 8G 4 & 6 With Diamond Bevel Tip & Tapered Distal Canula. Disposable Bone Marrow Biopsy Needle Should Have Ergonomic T- Handle Design With Seprate Handle Cap. Should Have Trocar/Diamond Tip For Easy Coring Of Bone. Should Have Triple Crown Cannula Tip With 6 Facets.Should Be Available With Narrow Acquition Cardle With Sample Size Verfication Marking Should Be Available In 8,11,13 Gauze Usfda/Four Digit Ce Approved , Silicone Foleys Catheter With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter With Three Noble Metal Alloy Coating Consisting Of Gold, Silver & Palladium (Coated Internally & Externally Surfaces) , Silicone Foleys Catheter(18Fr, 2-Way) • Made From 100% Medical-Grade Silicone. • Biocompatible And Non-Reactive, Ideal For Long-Term Catheterization. • 2-Way Foley Catheter (Typically Available); • Smooth, Non-Stick Surface For Easy Insertion And Removal. • Integrated Silicone Balloon For Retention In The Bladder. • Radiopaque Stripe Throughout The Catheter Length For X-Ray Visibility. • Standard (Rounded) Tip. • Available In Sizes Ranging From: 18 Fr). • Follows International Color-Coded System To Identify French Sizes. • Large Symmetrical Drainage Eyes For Effective Urine Flow. • Latex-Free - Suitable For Patients With Latex Allergies. • Universal Funnel-Shaped Connector For Drainage Bag Attachment. , Cutting & Coagulations Device With Tissue Fusion Ligasure Technology Having Maryland Jaw Sealer And Divider With Wide Jaw Aperture 13Mm And Cut Length 18.5Mm With Shaft Rotation Of 350 Degrees And With One Step Sealing Mechanism. Should Have The Manual Cutting Mechanism. And It Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting & Coagulations Device With Tissue Fusion Ligature Technology Have Small Jaw Tissue Sealing System For Open Procedures Vessel Sealing Instrument With Cut Length Of 14.7 Mm, Seal Length Of 16.5Mm, Jaw Angle 28 Degrees. Should Have The Manual Cutting Mechanism.And Its Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting &Coagulations Device With Tissue Fusion Ligature Technology Laparoscopic Blunt Tipped Vessel Sealer And Divider 37 Cm Long 5Mm Instrument. Wide Jaw Aperture 14.5 Mm With Shaft Rotation Of 180 Degrees ; Multifunctional Laparoscopic Device For Tissue Fusion.And Its Should Have Including 7Mm Cutting And Coag With Usfda . , Cutting & Coagulations Device With Tissue Fusion Vessel Sealing Technology Instrument For Open Surgeries With Instrument Length Between 21-23Cm And Electrode Length Between 17-21Cm Having 22 Degree Curved Jaw With Contoured Tip Activation Both Through Hand Activation And Foot Activation With A Manually Controlled Cutting Mechanism. , Cutting & Coagulations Device With Tissue Fusion Ligasure Technology Have 36Mm Jaw Length, 180 Degree Rotatable Instrument With Curved Blade For Large Volume Tissue. Should Have The Manual Cutting Mechanism. , Cutting & Coagulations Device With Tissue Fusion Vessel Sealing Technology Have Vessel Sealing Instrument For Open Surgeries With Reusable Clamp Length Between 16-23Cm, With 12-40 Degree With Straight / Curved Jaw And Its Should Have Including 7Mm Cutting And Coag With Usfda. , Double Lumen Catheter Size- 12 Frx16 Cm Double Lumen Catheter Size- 12 Frx16 Cm (Double Lumen Catheter With Kit Internal Juglar / Straight (Catheter Should Be Madeup Of Flexible Radiopaque Polyurethane With A Radiopaque Tip, Easy Visualization In X-Ray. Accessory Should Be Provided Like Catheter ,Dialator ,Introducer, Needle 18 G, Guidewire With Dispencer And Injection Caps. Catheter Should Be D To Have Consistent Blood Flow With Laser Cut Side Slot)Size- 12 Frx16 Cm With Us Fda / Iso Ce Certified , Double Lumen Catheter Size- 12 Frx13 Cmdouble Lumen Catheter With Kit Internal Juglar / Straight (Catheter Should Be Madeup Of Flexible Radiopaque Polyurethane With A Radiopaque Tip, Easy Visualization In X-Ray. Accessory Should Be Provided Like Catheter ,Dialator ,Introducer, Needle 18 G, Guidewire With Dispencer And Injection Caps. Catheter Should Be D To Have Consistent Blood Flow With Laser Cut Side Slot Size- 12 Frx13 Cm Usfda Along With Iso Ce Certified , Long Term Double Lumen Dialysis Catheter Size- 15 Fr X 27 Cm Long Term Double Lumen Dialysis Catheter With Kit Accessories Should Be Provided Catheter, Pull Apart Sheath, Dialator, Tunnelling Stylet, Guide Wire J/S, With Disppenser And Injection Caps, Symmetrical Tip Retrograde And Antigrade Size- 15 Fr X 27 Cm Usfda Certification Along With Iso, Ce. , Long Term Double Lumen Dialysis Catheter With Kit Accessories Should Be Provided ( Catheter,Pull Apart Sheath, Dialator, Tunneling Stylet,Guide Wire J/S,With Disppencer And Injection Caps, Symmetrical Tip Retrograde And Antigrade , Long Term Double Lumen Dialysis Catheter With Kit Accessories Should Be Provided ( Catheter,Pull Apart Sheath, Dialator, Tunneling Stylet,Guide Wire J/S,With Disppencer And Injection Caps, Symmetrical Tip Retrograde And Antigrade , Transperant Surgical Wound Dressing Size- 5X 5.72 Cm Tranparent Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidal Protection And Anti Microbial Property. Provide A Waterproof Sterile Barrier To External Contaminating Including Liquids, Bacteria Anf Viruses , Transperant Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidle Proteciton And Anti Microbial Property , Transperant Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidle Protection And Anti Microbial Property , Transperant Surgical Wound Dressing With A Dimensional Hydrocellular Pad Microbicidle Protection And Anti Microbial Property , Multi-Vent Mask Pediatric, Multi-Vent Mask Pediatric, Air Entrainment Masks, Must Be Safe, Simple Delivery Of Variable Oxygen Concentrations. Each Mask To Includes Color-Coded Diluters: Green For Low Concentration, White For Medium Concentration. Locking Ring To Secure Flow Setting. Must Include Adaptor For High Humidity Entrainment. Complete Kit With 7-Ft Oxygen Tubing. Manufacturer Must Be Us-Fda Registered & Certified With En/Eu Iso 13485 & Applicable 510K & Ce Certification. , Closed Suction Catheter Mdi Port Has Isolated Cleaning Chamber For Cleaning Catheter Tip With Mdi Port. Catheter Is Made Up Of Medical Grade Silicon/Poly Urethane Material, Catheter Has Zigzag Ports For Better Suctioning. Available In Both Endotracheal And Tracheostomy Version. Can Be Used For 72Hr. Size 12-Fr Product Should Be Usfda Approved , Closed Suction Catheter Mdi Port Has Isolated Turbo Cleaning Chamber For Cleaning Catheter Tip With Mdi Port.Catheter Is Made Up Of Medical Grade Silicon Material,Catheter Has Ports For Better Suctioning. Available In Both Endotracheal And Tracheostomy Version. Can Be Used For 72Hr. , Closed Suction Catheter Has Isolated Cleaning Chamber 12 Fr. Closed Suction Catheter Has Isolated Turbo Cleaning Chamber For Cleaning Catheter Tip.Catheter Is Made Up Of Medical Grade Silicon/ Poly Urethane Material,Catheter Has Zig-Zag Ports For Better Suctioning. Available In Both Endotracheal And Tracheostomy Version.Can Be Used For 72Hr. Size 12 Fr. , Closed Suction Catheter Mdi Port Has Isolated Cleaning Chamber For Cleaning Catheter Tip With Mdi Port. Catheter Is Made Up Of Medical Grade Silicon/Poly Urethane Material, Catheter Has Zigzag Ports For Better Suctioning. Available In Both Endotracheal And Tracheostomy Version. Can Be Used For 72Hr. Size 14-Fr Product Should Be Usfda Approved. , Multifocal Iol Multifocal Iol (Multifocal Iol Biconvex, Single Piece Optic Size 6 Mm, Overall 12-13 Mm Haptics Hydrophobic Single Loop Or Hydrophilic Double Loop Uv Blocking 360 Degrees Square Edge, Sterile Packing Disposable Sterile Injector For Sub 2.8 Mm Incision Power +16 To + 25 D Diffractive Multifocal Design With Near Add +3 To +4 D Iso Or Ce Approved Samples Required For Approval , Glaucoma Drainage Implant (Valved) With Silicon Tube Adult , Glaucoma Drainage Implant (Valved) With Silicon Tube Paediatric , Scleral Fixiated Intraoccular Lense Single Piece Pmma: Optic6-6.5Mm, Overall13.5Mm Haptic With Hole For Suture Fixation , Central Line With Triple Lumen With Y Needle With Syringe And Guide Wire 7Fr To 8.5Fr With 15 Cm To 20 Cm Catheter With Tecoflex/ Polyurathane Material With Usfda Approved. , Post Operative Surgical Cover Dressings Hydrofiber/Foam Dressings With 1.2% W/W Impregnated Ionic Silver & Tripple Hydrocolloid Matrix Dressings With Broad Spectrum Bactricidal Efficacy With Gel Forming Technology, Ce, Iso & Fda Approved , Post Operative Surgical Cover Dressings Hydrofiber Dressings With 1.2% W/W Impregnated Ionic Silver & Triple Hydrocolloid Matrix Dressings With Broad Spectrum Bactericidal Efficacy With Gel Forming Technology, Ce, Iso & Fda Approved , 2 Pcs Flat Base Ostomy Body Fit 60 Mm Kit 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. Window On Bag For Inspection 60Mm, Elastic Tape In Semi-Circular Shape With Hydrocolloid Adhesive For Extra Security Of Base Plate. Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm), Neutral Grey Colour Standerd Size Belt Compatible For Bags Having 4 Ear Hooks , 2 Pcs Convex Base Ostomy Body Fit 60 Mm Kit Two- Piece System 6 Mm Aperture Convex With Integrated Flex Line Base Plate. Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 4 Ears Belt Lock.Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. Audible Click Sound Locking System With Highlighted Colour Lock Button. Coupling With Wave-Shaped Locking Bag. Window On Bag For Inspection 60Mm. Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm)Neutral Grey Colour Standerd Size Belt Compatible For Bags Having 4 Ear Hooks , 1 Pcs Trasnparent Colostomy Body Fit 60Mm Kit One- Piece Colostomy Bag- Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.34 N/Mm), Bag Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Neutral Grey Colour Material. Triple Layer Filter With Full Circle Pre Filter And Three Times Fold Velcro Locking Drainage. One Side Transparent For Inspection 60Mm. Adhesive Remover Spray Consists Of Hexamethyldisiloxane And Cyclonentasiloxane Silicone Polymers For Easy Removal Of The Base Plate, Alcohol Free, Sting Free 50 Ml. Cream To Maintain Peristomal Ph Value (5.5) Of Skin Contain Magnesium Citrate, Glycerine, Petrolatum, Citric Acid To Moisturize And Prevent Damage To Skin 60 Ml. Non Alcoholic Ostomy Paste For Filling And Sealing The Peristomal Skin Around The Stoma Contains Polyaliphatic Hydrocarbon , Water Base , Gaur Gum 60 Gm. Ostomy Powder With Natural Ingredients Such As Cmc, Guar Gum And Xanthan Gum For Peristomal Skin Excoriation 25 Gm. Cleanser To Clean Skin Exposed To Intestinal Secretions Consist Of Isopropyl Alcohol, Allantoin, Natural Coconut Oil . Lubricating Deodorant To Neutralize Odour And Provide Lubricating Effect To Ensure Content At The Bottom Not Around Stoma For Easier To Empty Bag 250 Ml. Skin Barrier For Healthy Peristomal Skin Or Risk Of Skin Damage Due To Bady Secretions Or Skin Damage Already Developed Consist Of Polyethylene, Plasticizer, Polyamide, Artificial Resin, Cmc, Sis ( 20Cm*20Cm) , 2 Pcs Flat Base Ostomy Body Fit Bag 60 Mm 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 2 To 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Material .Triple Layer Filter With Full Circle Pre Filter And Drainage Locking System. Window On Bag For Inspection 60Mm . With Nursing Care Services And Trained Hospital Staff As Well Stomach Care Clinic. , 2 Pcs Flat Base Ostomy Body Fit Bag 70 Mm 2-Piece System Base Plate With Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 2 To 4 Ears Belt Lock. Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Material .Triple Layer Filter With Full Circle Pre Filter And Drainage Locking System. One Side Transparent For Inspection. 70Mm. With Nursing Care Services And Trained Hospital Staff As Well Stomach Care Clinic , 2 Pcs Convex Base Ostomy Body Fit Bag 60 Mm Two-Piece System 6 Mm Aperture Convex With Integrated Flex Line Base Plate. Body Fit Additional Elastic Adhesive Technology (Elastic Modulus-0.18 N/Mm), With 2 To 4 Ears Belt Lock.Colostomy Bag, Consists One Barrier Foil And A Oecotex Certified Water Repellent Textile Material. Triple Layer Filter With Full Circle Pre Filter And Drainage Locking System. . Window On Bag For Inspection 60Mm. With Nursing Care Services And Trained Hospital Staff As Well Stomach Care Clinic , Antimicrobial Transperant Provides Immediate And Continuous Antimicrobial Protection With Integrated Chlorhexidine Gluconate (Chg) Gel Pad, Proven To Reduce Crbsi And Vascular Catheter Colonization, Size 11.5Cm To 8.5Cm, Breathable Film Coating Provides A Barrier To Microbes* And External Contaminants Size 11.5Cm To 8.5Cm, , Sterile Self Adherent With Lipido Colloid Technology / Safetac Layer Sterile Self -Adherent Patented Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined With Absorbent Polyurethane Foam Pad, A Superabsorbent Layer, A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing. Size 13X13 Cm And More , Sterile Self Adherent With Lipido Colloid Technology / Safetac Layer Sterile Self -Adherent Patented Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined With Absorbent Polyurethane Foam Pad, A Superabsorbent Layer, A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing. Size 10X25 Cm , Polysiloxane Or Silicone Gel Sheet For Scar Management. Size 10 * 10 Cm Or 10X18cm , Polysiloxane And Silicone Gel Sheet For Scar Management Size 5 X5 Cm , Triple Layer Antimicrobal Form Dressing For Burn Wound With Silver Sulphate, Silver Content 1.2 Mg/Cm 2 With Active Release Of Silver Upto 7 Days With Soft Silicon Atraumatic Wound Contact Layer For Painless Dressing Change. Product Should Be Ce/Usfda Certified Size 20X20 Cm (45Mm) + 15% Deviation Insize Will Be Acceptable. , Triple Hydrocolloid Skin Barrier Where No Cutting Is Required Comprised Of Pectin, Gelatin And Sodium Carboxy Methyl Cellulose,Elastomeric Polymers Extending Turtlenecking Effect And Rebounding Memory Technology With Audible Click And Flexible Tape Collar. , Sulu Stepped Cartridges For Variable Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 60 Mm Inner To Outer Side 3.0,3.5 And 4.0 Mm , Purple Colour Code, Usfda Approved , Sulu Stepped Cartridges For Variable Tissue Application , Fixed Anvil , Different Leg Length Staples In Same Cartridge , Inbuilt Knife ,Size 60 Mm Inner To Outer Side 3.0,3.5 And 4.0 Mm , Purple Colour Code, Usfda Approved 10Mm , Nasal Haemostatic Sponge Pack With Out Airway 8Cm , Nasal Haemostatic Sponge Pack With Out Airway 10Cm , Nasal Haemostatic Sponge Pack (With Airway) 8Cm , Flexomatlic Tube 3-8.5 With Stylet Reinforce Et Tube With Wiring From Tip To End. It Should Be Usfda/Ce/Bis/Is. , Disposable Transducers For Invasive Pressure Monitoring Compatible With Available System In Cath Lab In Smsh Us Fda + Ce/ Dgci Approved· Disposable Transducers For Invasive Pressure Monitoring· Should Be Compatible With Available System In Cath Lab (Iabp - Data Scope & Cath Lab Transducer) And Iccu At Smsh· Should Meet Highest Medical Industrial Standards· Quality Certification Should Be Provided Form Authorized Agencies , Dialyzer Size 1.3 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Dialyzer Size 1.4 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Dialyzer Size 1.6 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Dialyzer Size 1.8 Sqm Dialyzer With Blood Tubing Set Dialyzer Should Be Synthetic Membrane (Poly Sulfon/ Polyethersulfon) Blood Tubing Set Must Be Same Company. , Padiatric Dialyzer Size 0 .6 Sqm Padiatric Dialyzer (Dialyzer Should Be Synthetic Membrane Polysulfon/Polyethersulfon) Other Product Required For Hemodialysis 1. Blood Tubing 2. Av Fistula Needle 16G/17 G 3. Transducer Protector , Padiatric Dialyzer Size 0.8 Sqm Padiatric Dialyzer (Dialyzer Should Be Synthetic Membrane Polysulfon/Polyethersulfon) Other Product Required For Hemodialysis 1. Blood Tubing 2. Av Fistula Needle 16G/17 G 3. Transducer Protector , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (3/8 Cir Rb Needle 40Mm Length 76 Cm)Size 1/0 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 20Mm Length 76 Cm) Size 3/0 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 30Mm Length 76 Cm) Size 2/0 , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 30Mm Length 76 Cm) Size 1/0 , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (L/2 Cir Rb Needle 40Mm Length 76 Cm)Size 1/0 , Absorbable Surgical Suture (Sterile Catgut), Bp/Usp Needled Suture Chromic (3/8 Rb Needle 30Mm Length 76 Cm) Size 2/0 , Absorbable Surgical Suture (Sterile Catgut),Bp/Usp Needled Suture Chromic (1/2 Cir Rb Needle 45 Mm Length 100 Cm) Size 1 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 26Mm, Length 76 Cm) Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) ½ Cir Rb Needle 20Mm Length 70 Cm Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 1/2 Cir Rb Needle 30Mm Length 90 Cm Size 2/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 1/2 Cir Rb Needle 30Mm Length75- 90 Cm Size 1/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 1/2 Cir Tapercut Needle (Heavy) 35- 40Mm Length 75-90 Cm Size 1 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) ½ Cir Rb Needle40mm Length 90 Cm Size 1 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) (1/2 Cir Conventional 25Mm Length 90 Cm)Undyed Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) (1/2 Cir Rb Needle 20Mm Length 70 Cm) Size 4/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide ) (1/2 Cir Rb Needle 40Mm Length 90 Cm Size 2/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) (1/2 Cir Rb Needle 40Mm Length 90 Cm) Size 1/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 3/8 Circle Cutting Needle 22Mm Length 45 Cm Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Surgical Needled Suture (Braided) Coated Polyglactin /Polyglycolic Acid / Poly(Glycolide-Co-L-Lactide) 3/8 Circle Cutting 16Mm Needle, Suture Length 70Cm Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk (1/2 Cir Rb Needle 20Mm, Length 76 Cm) Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk (3/8Cir Reverse Cutting Needle 26Mm, Length 76 Cm) Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk (3/8Cir Reverse Cutting Needle 45Mm, Length 76 Cm) Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suturepolyamide Monofilament Black (Nylon) (3/8 Cir Micropoint Round Body ,6Mm Length 38 Cm) Size 8/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Conventional Cutting Needle 16 Mm Length 70 Cm)Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Conventional Cutting Needle 19Mm Length 60 Cm.)Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cir Slim Blade Cutting Needle 15Mm Length 70 Cm) Size 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cir R Cutting Needle 40-45Mm Length 60-70 Cm.)Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cir R Cutting Needle 45Mm Length 70 Cm.)Size 1/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb 13 Mm Needle,Length 75Cm) Double Armsize 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8Cir Rb 16Mm Needle,Length 90 Cm) Size 6/0 , Non Absorbable Surgical Suture,Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8Cir Rb Double 8Mm Needle, Length 60 Cm)Size 7/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8Cir Rb 16 Mm Needle, Length 70 Cm) Size 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 30Mm Length 90 Cm) Size 1/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Heavy Needle 40- 45Mm Length 75-100 Cm) Size 1 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Double Needle Cutting Size 16-17Mm Length 70-90 Cm) Size 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Double Needle 17Mm Length 70-90 Cm) Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 25Mm, Length 90 Cm) Double Arm Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 30Mm, Length 90 Cm) Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Needle 17Mm Length 75 Cm) Double Arm Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Tapercut Needle,25 Mm Length 90 Cm) Double Armsize 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue Usp(3/8 Cir Conventional Cutting Pc-3Needle 15Mm Length 60Cm)Size 6/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8 Cir Rb 13Mm Needle, Length 90 Cm Double Armsize Size 6/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 16 Mm Length 70 Cm) Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8 Cir Cutting Needle 25Mm Length 45 Cm)Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Heavy 40Mm, Length 90 Cm) Size 1 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (L/2 Cir Reverse Cutting, 45 Mm Needle Length 100 Cm) Size 1 , Non Absorbable Surgical Suture, ,Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (3/8 Cir Rb , 8Mm Double Needle, Suture Length Of 70Cm) Size 8/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Circle Tapercut 13Mm Double Needle 70Cm)Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Circle cement concrete 13Mm Needle, Suture Length Of 70Cm) Double Arm Size 5/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Circle Tapercut Needle 17Mm Suture Length Of 90Cm) Double Armsize 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polypropylene Blue (1/2 Cir Rb Needle 25Mm, Suture Length Of 75Cm) Double Arm Size 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Polybutylate / Silicon Coated Polyster Braided Green/ Blue (1/2 Cir Tapercut ,17 Mm Double Needle, Length 75 Cm)Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Polybutylate / Silicon Coated Polyster Braided White (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Polybutylate / Silicon Coated Polyster Braided Green / Blue (1/2 Cir Tapercut ,17 Mm Double Needle, Length 90 Cm) Size 2/0 , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate / Silicon Coated With Polyster Braided (Green / Blue) 1/2 Circle Taper Cut , 17Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X L.5Mm Size 2/0 , Non Absorbable Surgical Suture Sterilized Surgical Needled Suture Polybutylate / Silicon Coated With Polyster Braided (Green / Blue) *With 1/2 Circle Taper Cut , 25Mm Double Armed Needle, Suture Length Of 90Cm With Pledgets Size 6 X 3 X L.5Mm Size 2/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Braided Coated Polyster,Green/White Or Blue/White Coated Polyster Braided (Green / Blue) With 1/2 Circle Tapercut Double Needle 25Mm, Suture Length 90 Cm Size 3/0 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyglecaprone, Monofilament Sutures (1/2 Circle Oval Rb Needle 26Mm Needle, Suture Length Of 70Cm)Size 2/0 , Absorbable Surgical Sutures Polyglecaprone, Monofilament Sutures (L/2 Circle Oval Rb Contrast Needle 26Mm, Suture Length 70Cm) Size 3/0 , Absorbable Surgical Sutures Monofilament Sutures Polyglecaprone /Polyglyconate (L/2 Circle Cutting 16Mm Needle,Suture Length 70Cm)Size 4/0 , Absorbable Surgical Sutures Polyglecaprone / Polyglyconate, Monofilament Sutures (3/8 Circle Cutting24- 26Mm Needle, Suture Length Of 70-90Cm)Size 3/0 , Absorbable Surgical Suture (Synthetic) Sterilised Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Reverse Cutting 40- 50 Mm Length 70- 90Cm) Size 1 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Rb 31Mm Needle, Length 70Cm) Size 2/0 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Monofilament Polydioxanone Violet (1/2 Circle Rb 30Mm Needle, Length 70Cm) Size 1/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet) 1/2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm/ Size 1 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)1/2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm Size 1/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)1/2 Circle Round Bodied 30Mm, Suture Length 90 Cm/ Size 2/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)1/2 Circle Reverse Cutting,Os 40Mm, Suture Length 90 Cm Size 1 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet)1/2 Circle Reverse Cutting 36Mm, Os Needle, Suture Length 90 Cm/ Size 1/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin / Polyglycolic Acid Violet) 1/2 Circle Round Bodied 20Mm, Suture Length 70 Cm Size 3/0 , Absorbable Surgical Suture (Synthetic) Antibacterial Coated Sterilised Needled Suture (Braided Coated Polyglactin/ Polyglycolic Acid Violet)3/8 Circle R Cutting, Ps-1,24Mm, Suture Length 70 Cmsize 3/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyamide Monofilament Black (Nylon) (3/8 Cutting Spatulated Edge Needle, Double Arm Needle 6 Mm, Suture Length 30-42 Cm Size 10/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 16Mm, Length 76 Cm) Size 5/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Cutting Needle 8Mm, Length 35 Cm) Size 6/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk With Needle Silk (3/8 Cir Rb Needle 20Mm, Length 76 Cm) Size 4/0 , Non Absorbable Surgical Suture, Sterilised Surgical Needled Suture Black Braided Silk With Needle Silk (3/8 Cir Rb Needle 16Mm, Size 5/0 , Absorbable Surgical Suture (Sterile Catgut), Needled Suture Chromic (3/8 Cir Rcutting Needle 16-19Mm Length 76 Cm) Size 4/0 , Absorbable Surgical Suture, Sterilised Surgical Needled Suture Polyglyconate, Monofilament Sutures (1/2 Circle Oval Rb Needle 26-30Mm Needle, Suture Length Of 70Cm) Size 2/0 , Absorbable Surgical Suture Polyglyconate, Monofilament Sutures (L/2 Circle Oval Rb Contrast Needle 20-26M M, Suture Length 70Cm) Size 3/0 , Braided E Caprolactone Coated Lactomer 1, 90Cm Gs-25,37-40Mm1/2 Circle Taper Point , Braided E Caprolactone Coated Lactomer 2-0 90Cm Gs-25,3Omm1/2 Circle Taper Point , Braided E Caprolactone Coated Lactomer 1 90Cm Gs-25,37-40Mm1/2 Circle Reverse Cutting , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,40Mm Needle, Size 1, 1/2 Circle Taper Point, 90 Cm , Braided E-Caprolactone Coated Lactomer 3-0 75Cm C-14 , Undyed 24Mm 3/8 Circle Reverse Cutting , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,30Mm Needle, Size 2-0, 1/2 Circle Taper Point, 90 Cm , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,40Mm Needle, Size 1, 1/2 Circle Reverse Cutting Os Needle, 90Cm , Braided E-Caprolactone Coated Lactomer 0 90Cm Gs-24 , Violet 40Mm 1/2 Circle Taper Point , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure As Per Usp Specifition, Purest Form Of Triclosan,20Mm Needle, Size 3-0, 1/2 Circle Taper Point, 70 Cm , Braided E-Caprolactone Coated Lactomer 1-0 90Cm Gs-25 , Dyed/Undyed 37- 40Mm 1/2 Circle Reverse Cutting , Polyglactin 910 Violet Braided, 1, 35 Cm 1/2 Circle Reverse Cutting (Heavy) 23 Mm -25 Mm Needle , Polyglactin 5-0 Rb Oval ½ Circle 16 Mm 45 Cm , Polyglactin 5-0 cement concrete 3/8 Circle 16 Mm 45 Cm , Polyglactin910 (90% Glycolide & 10 % Lactide) Coated With 370 Polyglactin & Calcium Stearate, Impregnated With 97-103% Pure Mp, Purest Form Of Triclosan, 26Mm Needle, Size 2-0, 3/8 Circle Cutting, 90 Cm , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone Coated With Purest Form Of Triclosan 97-103% & Above, Violet 1/2 Circle Taper Point, 17-20Mm Needle, Length 70Cm Size 3-0 , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone Coated With Purest Form Of Triclosan 97-103% & Above, Violet 1/2 Circle Taper Point Rb-1, 17 Mm Needle, Length 70Cm Size 4-0 , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone, Violet 1/2 Circle Taper Point Rb-2, Double Needle, 13 Mm Needle, Length 70Cm Size 5-0 , Absorbable Surgical Suture Sterilized Surgical Needled Suture Monofilament Polydioxanone, Violet 3/8 Circle Taper Point, Bb Single Armed Needle 17 Mm Needle, Length 70Cm Size 5-0 , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 6-0 Rb 17 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 6-0 Rb 11 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Double Armed Needled Suture Monofilament Polydiaxanone Violet 5-0 Rb 11 Mm Needle Length 90 Cm , Absorbable Surgical Suture Sterilized Surgical Single Armed Needled Suture Monofilament Polydiaxanone Violet 5-0 Rb 17 Mm Needle Length 90 Cm , Monofilament Polyglyconate 1 150Cm Gs-25 Loop, Green 48Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 2-0, 75Cm Green 26-30Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 3-0, 75Cm Green 20-26Mm 1/2 Circle Taper Point , Monofilament Polyglyconate 4-0, 75Cm Green 17-20Mm 1/2 Circle Taper Point , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 3-0,70 Cm,1/2 Circle Rb,20 Mm , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 4-0,70 Cm,1/2 Circle Rb,20 Mm , Monofilament Synthetic Absorbable Suture Polydioxanone - Violet Ep 5-0,70 Cm,1/2Circle R.B.,13 Mm , Monofilament Glycomer 1 90Cm Gs-21 , Violet 37Mm 1/2 Circle Taper Pont , Monofilament Glycomer 2-0 90Cm Gs-21 , Violet 37Mm 1/2 Circle Taper Pont , Non Absorbable Surgical Suture, Sterilized Surgical Needled Black Braided Silk With Needle 1/2 Circle Round Body 30 Mm Needle , Length 70 Cm Size 2-0 , Braided Coated Non Absorbable Suture Usp 1-0 75 Cm X 2 , Braided Coated Non Absorbable Suture Usp 2-0 75 Cm X 2 , Braided Coated Non Absorbable Suture Usp 3-0 75 Cm X 2 , Silk Reel 4-0 , Braided Polyester Caoted With Silicon 2, 26Mm 1/2 Circle Rc 75Cm , Braided Polyester Caoted With Silicon 5, 55Mm 1/2 Circle Rc 75Cm , Polypropylene Blue Monofilament, 2-0, 90 Cm 1/2 Circle Round Body Double Needle26 Mm , Polypropylene Blue Monofilament Usp 3/0,2,90 Cm,1/2 Circle Taper Point (Double Armed),26 Mm , Polypropylene Blue Monofilament, 4-0, 75 Cm 1/2 Circle Round Body Double Needle 17 Mm , Polypropylene Blue Monofilament Usp 5/0,1,90 Cm,1/2 Circle Taper Point (Double Armed),18 Mm , Polypropylene Blue Monofilament, 6-0, 75 Cm 3/8 Circle Round Body (380 Microns) Double Needle (Cutting) 13 Mm , Non Absorbable Polypropylene Surgical Sutures Size:7-0,3/8 Circle C1 Taper Point Cv Needle Made Of Tungsten - Rhenium Alloy And Finished With Multilayer Silicon Coating Double Armed,8 Mm,60 Cm , Monofilament Polybuetester Coated With Polytribiolate 6-0 75Cm 2Xcv-1X36 , Blue 9Mm 3/8 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 4-0 90Cm 2Xcv-23X36 , Blue 17Mm 1/2 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 7-0 60Cm 2Xmv-175-8 , Blue 8Mm 3/8 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 2-0 90Cm 2Xv-20X 36 , Blue 26Mm 1/2 Circle Taper Point , Monofilament Polybuetester Coated With Polytribiolate 3-0 90Cm 2Xv-20X36 , Blue 26Mm 1/2 Circle Taper Point , Non-Absorbable Synthetic Unidrectional Dual Cut Angle Barb With Welded Loop Or Tab End Made Up With Polybeutester Size 1, 37Mm, 30Cm, 1/2 Circle, Taper Point , Synthetic Nonabsorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polybeutester Blue Size 2-0, 1/2 Circle, 37Mm, 30Cm Taper Point , Absorbable Synthetic Unidirectional Dual Cut Angle Barbed With Welded Loop Or Tab End Made Up With Polyglyconate 2-0 26-30 Mm 30 Cm 1/2 Circle Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 1-0, 1/2 Circle, 37Mm, 30Cm Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 2-0, 1/2 Circle, 26Mm, 30Cm Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop Or Tab On End Madeup With Polyglyconate Green Size 3-0, 1/2 Circle, 26Mm, 30Cm Taper Point , Synthetic Absorbable Wound Closure Device With Dual Cut Barb With Velded Loop On End Madeup With Glycomer Blue Size 2-0, 1/2 Circle, 24Mm, 30-45Cm Rc , Polyester Ethylene Terephthalate Nonabsorbable Surgical Braided, Sterile, Surgical Suture Composed Of Poly (Ethylene Terephthalate.) Long-Chain, Linear Polyesters 1 /2 Circle Tapercut 2 X V-5 Double Needle 26 Mm 90 Cm Green Color Size 2-0 , Laproscopic Knotless Pga -Pcl Bidirectional Taper Point Surgical Suture Self Fixation Device With Autolock Mechanism Made Up Of Pga -Pcl Bidirectional Taper Point 17 Mm & 32Cm , Absorbable Antibacterial Polydiaxonone Monofilament Taper Point Surgical Suture Absorbable Antibacterial Suture Made Up Of Polydiaxonone Coated With Triclosan Violet Monofilament 1/2 Circle Taper Point Ct-1 40 Mm Needle 90 Cm Suture Size 1 , Braided Coated Non Absorbable Suture Natural Silk - Black Dyed Usp 1-0,90 Cm,1/2 Circle R.B.,30 Mm , Non-Absorbable Surgical Suture Black Braided Silk 1-0 Rc 3/8 Circle 45 Mm 76 Cm , Non-Absorbable Surgical Suture Black Braided Silk 5-0 Rc 3/8 Circle 12 Mm 76 Cm , Braided Coated Non Absorbable Suture Natural Silk - Black Dyed Usp 5-0,76 Cm,3/8 Circle R.B,12 Mm , Non-Absorbable Surgical Suture Black Braided Silk 6-0 Rc Mp 3/8 Circle 8 Mm , Braided Coated Polyglactin Absorbable Suture Polyglactin 910 -Undyed 2-0, 1/2 Circle Taperpoint, 36 Mm,100 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Violet 6-0 Rb Micro Point ¼ Circle 8 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Violet 4-0 cement concrete 3/8 Circle 16 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Violet 3-0 cement concrete 3/8 Circle 16 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Violet 5-0 cement concrete 3/8 Circle 16 Mm 45 Cm , Absorbable Surgical Suture (Synthetic )Coated Polyglactin/Pga 910 Violet 5-0 Rb Oval 1/2 Circle 16 Mm 45 Cm , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 26Mm Length 70Cm3-0 , Non Absorbable Surgical Suture Sterilized Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 16Mm Length 70Cm4-0 , Non Absorbale Surgical Suture Sterlised Surgical Needle Suture Polyamide Mono Filament Black (Nylon) 3/8 Conventional Cutting Needle 16Mm Length 70Cm 5-0 , Non Absorbable Polypropylene Surgical Sutures Size:6-0,3/8 Circle 175-6 Taper Point /Rc Bv Needle Made Of Tungsten - Rhenium Alloy And Finished With Multilayer Silicon Coating Double Armed,9.3 Mm,60 Cm 13 Mm , Non Absorbable Polypropylene Surgical Sutures Size:7-0, Compound Curve ( 1/2 & 3/8 Circle) Circle 175-6 Taper Point Blackmatte Needle Made Of Tungsten - Rhenium Alloy And Finished With Multilayer Silicon Coating Double Armed,9.3 Mm,60 Cm , Monofilament Synthetic Absorbable Suture Poliglecaprone 25 - Undyed Ep 3-0,70 Cm,1/2 Circle Oval R.B. J.B. Needle,26 Mm , Braided Coated Polyglactin Absorbable Suture Polyglactin 910 -Undyed 3-0, 3/8 Circle Reverse Cutting,Ps Prime 24 Mm,75 Cm , Gauze Than 120Cm X 9 Mtr (Jk47) , Absorbent Cotton Wool Ip 500 Gm , Cotton 200 Gm (Jk153) , Cotton Bandage 4Inch (4.0419) (10Cm X 9 Mtr ) , Cotton Bandage 6Inch (4.042) (15Cm X 9 Mtr ) , Baby Diaper Small (Pba001) , Disposable Appron / Plastic Appron , Shoe Cover (Jk201) , Disposable Needle 22No , Disposable Needle 23No , Disposable Needle 24 No , Disposable Needle 26 No , Infant Feeding Tube 6G (4.0747) , Spinal Needle With Pencil Point Tip Having Tranparent Grooved Hub And Introducer Needle Size 27G X 3.5Inch (4.1315) , Opthalmic Micro Surgical Crecent Blade , Opthalmic Micro Surgical Knife(Keratom) , Ear Buds , Medical Body Protector Premium , Pure Type 1, Triple Helical, Porous Collagen In Particle Form (Fish Origin) With Mupirocin Usp 2% W/W And Metronidazole Ip 1% W/W, Size- 10Ml , Super Oxidized Solution With Neutral Ph Containing Hypochlorous Acid (0.003%) And Sodium Hypochlorite (0.004%) For Wound Treatment In Spray Bottle Of 500Ml , Advanced Fluid Administration System With Air Stop & Prime Stop With Integrated Back Check Valve Bacterial Retention Air Vent, Transparent Spike Designed In Accordance With Iso 8536-4, Transparent Drip Chamber (Double), 15Micron Fuild Filter In The Chamber Medical Grade , Porus Resorbable Collagen (Pure Type-1) Sheet In Nylon Mesh-Dry Form (Fish Origin)-Size- 10X10cm , Non-Occulusive Wound Contact Layer Consists Of Silver Healing Matrix Made Ofp Polyester Mesh Impregnated With Hydrocolloid Particles( Cmc), Petroleum Jelly, Polymers And Silver Salts With Demonstrated In Vitro Antibacterial Activity Upto 7 Days, Using Lipido- Colloid Technology (Tlc) , Size-10X12cm , Pure Poly Siloxane Based Silicone Scar Management Product In Sheet Form(100% Poly Siloxane And Nylon Polyamide Mesh) -Size- 10X10cm, , G Dress 10.5*25Cm , G Dress 8.5*6.5Cm , Amorphous Hydrogel In Applipak Composing Of 2.3% Carboxymethylcellulose,20.0% Propylene Glycol & Purified Water, Promotes Rapid But Gentle Debridement Of Necrotic Tissue. Size 25Gm , Triple Chambered Nutrition(3 In One) For Periperal Iv Emlusions 1800Ml-2100Ml With 80% Olive /20% Soya Lipid,Amino Acids,Glucose & Electrolytes. Tpn 1Ltr Triple Chamber Bag Should Contain Protein 20-45 Gm/L Lipid 20-40Gm/L Glucose 80-160 Gm/L , Non-Leadradiationprotectiongloves - Bis Certified , Latex Free Disposable Pencil Point Spinal Needle 27G , 127.5 Mm With Grooved Transparent Hub With Centering Protective Plastic Sleeve, Touhy Needle With Black Eye - 18 G (1.3 X 88 Mm). Protrusion Of Spinal Needle Through The Back Eye Of The Epidural Needle. With Epidural Catheter, Filter, Loss Of Resistance Syringe And Separate Locking Device - Docking System. , Electrolysed Non-Toxic, Non-Irritant And Non-Corrosive, Ready To Use Disinfectant Solution With Neutral Ph Containing Sodium Chloride (Na Cl)- )0.023%, Sodium Hypochlorite (Naocl)- 0.005%, Hypo Chlorous Acid (Hocl)- 0.004%, Electrolysed Water- 99.97% In Jerricane Of 5 Litre
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 7
8.
Railways #11414448 AOC
Supply Of di- electrical safety shoes , supply of various size of di- electrical safety shoes, electric shock resistant up to 30 kv as p er attached specification. technical specification for art 9721w product: 30kv dielectric boot with steel to e. 1). size range : 5-11 2).type of construction vulcanized rubber upper and sole. 3).last/ sole pattern ps v & vsv/ st 4).specialty tested individual boots at 30kv under wet condition 5).recommendation for worki ng environment with high voltage hazards power station operations substation (step-up/ step-down/ distrib ution) operations electrical hazards with wet condition/ water exposure high current leakage hazards electr ical installations. 6). compliance- astm f2413-18 m i/c eh european standard ce approved en iso 20345 : 2011 (sb e fo hro sra) en 50321-1:2018 class 3 ac (for installations with nominal voltage up to 26500v a.c. sb = standard basic protection as per en iso 20345 e= heel energy absorption fo = fuel oil resistant outsole hro = resistant to hot contact sra =slip resistance on ceramic tile with sodium lauryl sulphate c sa z195-14 / astm f 2413-18 grade 1 toe protection compression resistance, 11kn 18 kv electric shock r esistance (esr) protection. 7). dielectricfootwear* astm f1117-03(2013) (min 20,000vac) 8). lining mater ial selected polyester grade lining comes with extra comfort and durability 9). upper construction leak-pro of (electrically verified)reinforced rubber upper high visibility with orange and green contrast easy for clea ning. 10). sole / heel electrical shock resistant sole suitable for high voltage/ current environment slip resis tant vulcanizedrubber outsole good abrasion resistant for extra durability heel energy absorption design to minimize the heel impact. 11). steel toe cap epoxy coated toe caps for anti-corrosion meets csa z195 imp act andastm f2413 compression tests. 12). chemical resistance sole & upper - good resistant towards aci ds and alkalis 13). finishing lacquer coating for weather protection. 14). packing recyclable polybag & 6pa rs in a carton. various sizes of electrical safety shoe as per requirement (size 6-11 as per attached chart) [ warranty period: 12 months after the date of delivery ] ]
Contract Date: Jun 30, 2026 Contract Value : 31.95 Lakh
Government Departments No of Bidders 1
9.
Defence #11406383 AOC
Bids Are invited for Coy Parade State Register Coy Parade State Register - Printed Register As Per Demand With 90Gsm Paper Dark Color Printing With 250 Pages And Suitable Of A3 Size As Per S Le With Hard Binding Cover With Staple Binding , Lrc Pad - Pad Packing Of 100Sheets With Hard Back Board As Per Printing Size Of Paper 85Gsm Paper Sheet As Per S Le A5 Size Pad With Matter Printed As Per Demand , Mess Bill Book - Pad Packing Of 100Sheets With Hard Back Board As Per Printing Size Of Paper 85Gsm Paper Sheet As Per S Le A5 Size Pad With Matter Printed As Per Demand , Battalion Parade State Register - Printed Register As Per S Le Demand With 80Gsm Bond Paper Dark Color Printing With 250 Pages And Suitable Size Of A2 As Per S Le , Car Diary - Car Diary A7 Size With Printing Matter As Per Demand Coustomize With Different Coloum For Office Stapled Type Book Use As Per S Le , Vehicle Check List Pad - Printed Veh Check List As Per S Le Demand With 50Gsm Paper White Color Printing With 200 Pages Pad Each And Suitable Size Of Fs With Hard Binding Cover With Staple Binding As Per S Le , Long Roll Register - Printed Register As Per S Le Demand With 90Gsm Paper Dark Color Printing With 250 Pages And Suitable Of A3 Size As Per S Le With Hard Binding Cover With Staple Binding , Individual Particular Register - Individual Particular Printed Register As Per S Le Demand With 90Gsm Paper Dark Color Printing With 250 Pages And Suitable Of A3 Size As Per S Le With Hard Binding Cover With Staple Binding , Voucher Pad - Printed Voucher Expense And Receipt Voucher List As Per S Le Demand With 50Gsm Paper White Color Printing With 200 Pages Pad Each And Suitable Size Of Fs With Hard Binding Cover With Staple Binding As Per S Le , Amn Flex 5X4 - Printed Amn Flex 5X4 As Per S Le Demand With 100 Gsm Paper White Color Printing With Staple Binding As Per S Le , Npg-88 Cartridge - Npg-88 Cartridge Set Of Full Four Ink Set Bk, C, M, Y Colour For Canon Machine Ir 2930 For Office Use , Philips 5.1 Home Theater - 5.1 Home Theater Systems, Ranging From Powerful Multimedia Speaker Setups To Modern, Cinematic Soundbars With Five Speakers. , Samsung Smart Led 43 Inch - Samsung 43 Inch Smart Tv Primary Feature Uhd Resolution 3840X2160, Crystal Qled Panels With Oprating System Usb And Hdmi Port For Office Use , Tata Sky Dish Antenna - Satellite Dish Antenna Designed For Receiving High-Definition And Standard-Definition Direct-To-Home Dth Satellite Signals, Durability, Weather Resistance, And High Signal Gain , Gym Mirror 5 Mm - Mirror Superior Rigidity Over Thinner 5 Mm, Preventing Visual Distortion Caused By Flexing Or Wall Vibrations During Heavy Workouts , Gym Motivational Wallpaper Poster - Gym Motivational Wallpaper Poster, Specifications Generally Vary Based On Whether You Want A Standard Thick Paper Print Or A Large Self-Adhesive Vinyl Wall Sticker , Gym Sign Board - Vary Based On Whether The Signage Is For The Exterior, Interior Branding, Or Facility Navigation. Standard Commercial Main Boards Generally Require Rugged, Weather-Resistant Materials , Slovic Dumbbell 7.5 Kgs - The Slovic 7.5 Kg Dumbbell A Fixed-Weight Hexagon Dumbbell Designed For Home Workouts And Strength Training , Hexa Dumbbell 15 Kgs - A 15 Kg 33 Lbs Hexagonal Hexa Dumbbell Is A Standard Fixed-Weight Strength-Training Tool Used For A Variety Of Full-Body Exercises , Hexa Dumbbell 12.5 Kgs - A 12.5 Kg Hexagonal Hexa Dumbbell Is A Standard Fixed-Weight Strength-Training Tool Used For A Variety Of Full-Body Exercises , Digital Red Led Square Wall Clock - A Standard Digital Red Led Square Wall Clock Like The Popular Ajanta Models Provides High-Contrast Timekeeping With Multi-Functional Displays , Healthy Smart Scale - A Healthy Smart Scale Is A Comprehensive Digital Body Analyzer That Uses Bio Electrical Impedance Analysis Bia To Measure Multiple Body Metrics Total Quantity : 607
Contract Date: Ref. Documents Contract Value : 2.08 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
10.
Housing Urban and Rular Development #11393709 Technical Bid
Tender For Supply & Installation Of Sanitary Fittings Item In Banga Bhawan, 3, Hailey Road & Bangla Bhawan, 2, Pt. Uma Shankar Dikshit Marg, Chanakyapuri, New Delhi During The Year 2026-26.-1.00 Supplying Fitting And Fixing Of Chromium Plated Over Brass (Heavy Quality) Make Concealed Stop Cock With Flange Of Approved Make And Brand Tested To 21Kg/ Sq.Cm Equivalent To Cat No. Mor-1040, Model - Orintal Of Marc Or Similar Brand. I) 15Mm Dia Supply Of Rin Fabric Whitener - Liquid (Ala) Or Similar 500Ml Bottle. 2.00 Supplying Fitting And Fixing Of Chromium Plated Over Brass (Heavy Quality) Make Angular Stop Cock With Flange Of Approved Make And Brand Tested To 21Kg/Sq.Cm Equivalent To Cat No. Mor-1060A, Model - Orintal Of Marc Or Similar Brand. I) 15Mm Dia Supply Of Surf Excel Easy Wash Detergent Powder 1 Kg Pack Or Equivalent. 3.00 Supplying Fitting And Fixing Of Chromium Plated Over Brass (Heavy Quality) Make Two-In-One Bib Cock With Flange Of Approved Make Equivalent To Cat No. Mor-1060A, Model - Orintal Of Marc Or Similar Brand. I) 15Mm Dia Supply Of Surf Excel Easy Wash Liquid Detergent 1L Pack Or Equivalent. 4.00 Supplying Fitting And Fixing Of Chromium Plated Health Faucet With 1Mtr. Fexible Tube With Wall Hook Of Approved Make Equivalent To Cat No. Mor-30S0, Model - Orintal Of Marc Or Similar Brand. 5.00 Supplying Of Chromium Plated Over Brass Soap Dish Of Ethos Make Model-El1102 Or Similar Quality As Approved By The Engineer-In-Charge. 6.00 Supplying Of Chromium Plated Round Shower With Revolving Joint Having 80 Mm Dia. With Rubid Cleaning System For 15 To 20 Mm Of Model No.Gx-6129 Of Abs Make Or Similar Brand As Per Direction Of Engineer-In-Charge. 7.00 Supplying, Fitting, Fixing Of Chromium Plated Toilet Paper Holder Of Ethos Make Model – El1111 Or Similar Quality As Approved By The Engineer-In-Charge. 8.00 Supplying, Fitting & Fixing Of Stainless Steel Best Quality Telephonic Shower With Ss Finish Flexible Tube & Hook Of Marc Or Equivalent As Per Direction Of E.I.C [Equivalent Code Msr-1280N Marc] 9.00 Supplying Of Flexible Basin Mixture Connector Pipe Having Outer Surface Made With Dense Fabricated G.I. Wire Mesh Over Internally Aligned With Durable Epdm Rubber Tube And One End Connected With 10 Mm Dia Male Threaded C.P. Brass Coupling And Other End Connected With C.P. Nut Of 15 Mm Dia. Of Approved Make And Brand As Per Direction Of Engineer-In-Charge. I) 450 Mm Long 9.01 Ii) 600 Mm Long 450 Mm Long 10.00 Supplying Mirror Of Size 18 Inches X 24 Inches In Size Of Requisite Shape And Design With Imported Quality Glass Thickness Not Less Than 6 Mm, Water Proof, Front Surface Would Be Without Any Stain, Fitted With Safety Seam At The Edge, With Minimum Reflactance Performance Of 93.5% Having Humidity Resistance Characteristics And Should Have Appropriate Corrossion Resistance Property As Directed By The Engineer-In-Charge. 11.00 Supply Of Heavy Duty 1 1/4 Pvc Flexible Cp Hose Waste Pipe Of Approved Make With Both Ends Coupling With Heavy Brass C.P. Nut, 15 Mm Dia. 12.00 Supplying Fitting And Fixing 12 X 12 Front Glass Shelves Made With 12 Mm Thick Tinted Glass With Chromium Plated Over Brass Rim Barrier Including Supply Of C.P Over Brass Wall Mounted Brackets Of Approved Make And Brand. 13.00 Supplying Fitting And Fixing Vgs-Wht-0312 Decorative Couple Closet With Cistern (Jaquar Make Couple Closet Wc Size :810X405X730 Mm) The Rate Including The Cost Of All Materials, Labour Charges For Scaffolding Etc. Complete In All Respect As Per Direction Of Engineer-In-Charge. 14.00 Supply, Fitting & Fixing Of Approved Make Chromium Plated Over Brass Wall Mixer (3-In-1) Suitable For Hot And Cold Water Supply, Manufactured From High-Quality Forged Brass Conforming To Relevant Indian Standards, Having Heavy-Duty Brass Body With Smooth Operating Mechanism And Superior Quality Ceramic Disc Cartridge/Valve Arrangement For Leak-Proof Performance. The Fitting Shall Be Nickel And Chromium Plated Over Brass With Mirror Finish And Corrosion-Resistant Coating, Shall Be Of Approved Make And Quality Equivalent To Jaquar/ Marc Or Other Approved Brand Conforming To The Above Specifications, Complete In All Respects And As Directed By The Engineer-In-Charge. 15.00 Supply, Installation, Fixing Of Chromium Plated Over Brass Spindle Of 15 Mm Nominal Size, Manufactured From High-Quality Brass Conforming To Relevant Indian Standards, Suitable For Use In Bib Cocks, Stop Cocks, Pillar Cocks And Other Sanitary Fittings As Required. The Spindle Shall Be Precision Machined, Heavy-Duty Construction With Accurately Threaded Stem, Complete With Brass Head, Washer Arrangement, Gland Packing, Nut And All Associated Components Necessary For Smooth And Leak-Proof Operation.The Spindle Shall Be Of Approved Make And Quality Equivalent To Jaquar/ Marc Or Other Approved Brand Conforming To The Above Specifications, Complete In All Respects And As Directed By The Engineer-In-Charge. 16.00 Supply, Fitting Fixinf Of Approved Make Health Faucet (Hand Held Bidet Spray) Manufactured From High-Quality Brass With Chromium Plated Finish Over Brass Body And Trigger Assembly, Complete With Flexible Stainless Steel Braided Hose Of Minimum 1.0 Metre Length, Wall Hook/Holder, Wall Flange And All Necessary Accessories Required For Proper Installation And Operation, Complete As Per Direction Of Engineer-In-Charge 17.00 Supply, Fitting & Fixing Of Chromium Plated Over Brass Toilet Paper Holder Of Marc/ Jaquar Or Similar Approved Make, Manufactured From High-Quality Brass With Heavy-Duty Construction And Superior Quality Nickel And Chromium Plating Over Brass, Having Smooth Edges Resistant To Corrosion, Tarnishing And Normal Wear And Tear. The Toilet Paper Holder Shall Be Wall Mounted Type, Suitable For Accommodating Standard Toilet Tissue Rolls, Complete With Roller/Spindle Mechanism, Concealed Fixing Arrangement, Wall Mounting Accessories, Screws, Rawl Plugs. Complete In All Respects And As Directed By The Engineer-In-Charge. 18.00 Supply, Fitting & Fixing Of Chromium Plated Over Brass Shower Mixer Of Marc/ Jaquar Make Or Equivalent Approved Brand, Manufactured From High-Quality Forged Brass Conforming To Relevant Is, Suitable For Mixing Hot And Cold Water Supply For Shower Application. The Shower Mixer Shall Be Of Concealed/Exposed Wall-Mounted Type As Approved, Having Heavy-Duty Brass Body, Complete In All Respects And As Directed By The Engineer-In-Charge. 19.00 Supply And Fixing Of Premium-Grade Designer Wash Basin Of Hindware Italian Collection Or Equivalent Premium Range, Manufactured From High-Quality Glazed Vitreous China/Fire Clay Ceramic With Elegant Contemporary Design And Superior Finish, Conforming To Relevant Indian Standards. The Wash Basin Shall Be Of Countertop, As Approved, And Aesthetically Superior Appearance Suitable For Luxury Bathrooms, Vip Suites, Complete In All Respects And As Directed By The Engineer-In-Charge. 20.00 Supply And Fixing Of Chromium Plated Brass Waste Fitting Of 32 Mm Diameter Of Ess Ess/ Marc Or Similara Make, Manufactured From High-Quality Heavy-Duty Brass Conforming To Relevant Is, Suitable For Wash Basin Installation. Complete In All Respects And As Directed By The Engineer-In-Charge. 21.00 Supply And Fixing Of Floor Mounted European Water Closet (Ewc) Of Jaquar/ Kohler Approved Make Or Similar, Manufactured From First-Quality Glazed Vitreous China Conforming To Relevant Indian Standards, Of Approved Design, Size And Colour, Complete With Integral Trap And Efficient Flushing Arrangement Suitable For Modern Sanitary Installations, Complete In All Respects And As Directed By The Engineer-In-Charge.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
11.
Defence #11392753 Technical Bid
Tender for Excavation In Trenches Not Exc 1.50 M Wide And Not Exc 1.50 M Deep For Foundation Or For Shafts, Wells Cesspits,Man Holes Etc Not Exc 10 Sqm On Plan And N Exc 1.5M In Depth And Getting Out In Soft / Loose Soil Complete All As Specified And As Directed. , Returning Filling In Including Spreading, Levelling, Watering And Well Ramming In Layers N.Exc. 25Cm Thick Complete All As Specified And Directed. , Removing Excavated Soil To Distance Not Exc. 50 M And Depositing Where Directed At A Level Not Exc. 1.5 M Above The Starting Point Etc Complete All As Specified And As Directed. , Material And Labour For Sand Filling Under Floors Or In Foundations Including Watering And Consolidation Complete All As Specified And Directed. , Excavating In Post Holes (Or Similar Holes) Each Not Exceeding 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering, And Removing Surplus Soil To A Distance N Exc 50M And Making Good Surfaces In Soft/Loose Soil Complete All As Specified And As Directed. , Material And Labour For Cement Concrete 1:2:4 Type B-0 ( Using 12.5Mm Graded Stone Aggregate ) As In Drain Channel, Copings, Flooring, Sub Base, Etc Complete All As Specified And Directed. , Material And Labour For Plain Cement Concrete 1:4:8 Type D2 (Using 40Mm Graded Stone Aggregate) In Foundations Filling And Mass Concrete Complete All As Specified And Directed. , Material And Labour For Plain Cement Concrete 1:3:6 Type C2 (Using 40Mm Graded Aggregate) In Foundations, Filling And Mass Concrete Complete All As Specified And As Directed. , Supply Only Water Proofing Compound. , Material And Labour For Brick Work With Sub Class B Old Size Built In Cm 1 : 4, Straight Or Curved On Plan Exc 6M Mean Radius On Plan Complete All As Specified And Directed. , Supply And Fix Steel Windows With Side Hung Shutters Glazed Shutter Including Both Side Openable (Out Side Glazed Window And Inside Fly Proof Window) Including Projecting Type Hinges With Steel Handle And Steel Peg Stay Complete With Glazing Bars And 12 Mm Square Bar Or Round Bar Of Approved Design Welded To Steel Window Frame Dovetailed Or Welded Complete All As Specified And Directed . , Supply And Fix Steel Ventilator With Top Hung Shutter Including Hinges, Steel Peg Stay, Complete All As Specified And Directed. , Supply And Fix Powder Coated Two Track Aluminium Sliding Window With Approved Make Of Following Extruded Section Of Anodised Glazed Shutter As Per Standard Engineering Practices Including All Other Accessories Complete Including 4.00 Mm Thick Tinted Glass Panes (Include Of 02 Nos Tinted Glass Window Shutter With Alu Frame With Frame ), Rubber Beading Window Shutter With Frame), , Locking System (Include Of 02 Nos Window Shutter) Etc. Complete All As Specified And As Directed. (Refer Jindal Cat M-2014 ) Aluminium Sections : A Series (I) Shutter Bottom & Top :- 37.50 X 15 X 1.3 Mm Thick (20690) (Ii) Shutter Interlock :- 37.50 X 23 X 1.3 Mm Thick (20689) (Iii) Shutter Side (Handle) :- 37.50 X 23 X 1.3 Mm Thick (20689) (Iv) Frame Bottom :- 75 X 26 X 1 Mm Thick (20671) (V) Frame Top And Sides :- 75 X 26 X 1 Mm Thick (20672) , Supply And Fix In Repairs 1.25Mm Thick Rolling Shutter Gear Opeated Type With Level Gear Box And Crank Handle As Specified Including Top Cuver, Anchoring Rod, Hasp And Staple And One Shop Coat Of Primer Erected In Postion As Indicated, Complete All As Specified And As Directed , Repair And Servicing Of Rolling Shutters Including Taking Down Shutters And Refixing In Same Opening Of Size Exc 5 Sqm N.Exc 10Sqm Complete Duly Greasing, Oiling, Welding As Required Complete All As Specified And Directed Notes: Ball Bearing, Saftey Lever Lock, Hood, Anchroing Rod And Any Other Accessories Reqd To Function The Shutter Inclusive In The Rate. Nothing Extra Shall Be Admission On This Account , Supply And Fix For Galvanised. 2 Strand, Steel Barbed Wire 2.24Mm Dia Barbed With 2Mm Dia Barbs At 75Mm Spacings And Straining And Fixing To Any Type Of Standard Rails Strain- Ing Bolts, Including, Securing Or Tying At Crossings With And Provision Of Galvanised Mild Steel Wire, Staples Or Steel Pins, Etc. As Directed (Each Line Wire To Be Measured). , Supply And Fix Ms Channel,Angle,Plate Or Tee Section Cut To Length Including Welding And Bending Angles As Necessary As Specified In Shape And Fabricated Fe-290 (Gde E-165) Complete All As Specified And As Directed. , Fixing Only Chain Link Fencing And Including Line Wire, Any Mesh, Size And Type To Any Type Of Standards, Rails, Straining Bolts, Etc. Including Provision Binding Wire Complete All Specified And As Directed. , Supply Only Chain Link Ms Galvanized Fencing Of Mesh Size (75Mmx75mmx3.15Mm) Of Wire Conforming To Is 2721 And Complete All As Specified Complete All As Specified And As Directed. , Material And Labour For Round Bar 10Mm Dia & Over Conforming To Fe 290 (Gde-E-165) Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Bindingwith The Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Cut To Length Bend To Shape Complete All As Specified And As Directed. , Supply And Fix For 11 To 15 Mm Dia Mild Steel, Screw Bold (Machine Made) With Hexagonal Or Square Head At One End And Screwed The Other, Or Screwed Both Ends, Each Screwed Ends To Be Fitted With Washers And One Hexagonal Or Square Nuts N Exc 5Cm Long Complete All As Specified And As Directed. , Material And Labour For Machine Cut Kota Stone Slab Flooring 18-20 Mm Thick Over Cement Screed Base 20 Mm In Cm 1:6, Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete , Material And Labour For Machine Cut Kota Stone Slab 18-20 Mm Thick In Riser Of Steps, Skirting, Dado And Pillar Laid Over Cement Screed And Jointed With Including 10Mm Thick Rendering In Cm 1:4 Etc Set And Jointed In Neat Cement Slurry Complete All As Specified And As Directed. , Material And Labour For 80Mm Thick M-40 Grade Cement Concrete Coloured Interlocking Paver Block Any Shape And Size Conformining To Is 15658-2006 With Grey Cement And Pigment As Approved Complete All As Specified And Directed. , Material And Labour Heavy Duty Parking Tiles Of Size 300Mmx300mmx10 To 12 Mm Thick Of Approved Make Jointed In Neat Cement Slurry, Pointed In White Or Coloured Cement To Match Colour Of Tiles, Over And Including 20 Mm Thick Screed Bed In Cement Mortar 1:6 Complete All As Specified And As Directed. Complete All As Specified And As Directed. , Material And Labour For 100 Mm Thick Plain Cement Concrete 1:4:8 Type D2 (Using 40Mm Graded Stone Aggregate ) In Sub Base Flooring Etc Complete All As Specified And Directed. , Material And Labour For 25 Mm Thick Plain Cement Concrete (1:2:4) Type B0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Floor Finished Rough To Receive Tiles Complete All As Specified And As Directed. , Material And Labour For 75Mm Thick Plain Cement Concrete 1:3:6, Type C2 (Using 40Mm Graded Stone Aggregate) As In Plinth Protection, Etc Finished The Surface Even And Smooth Without Using Extra Cement Including Provision Of Joint Of Size 10 Mm Wide & 10 Mm Deep And Filling With Bitumen Mastic Joint Filling At Every 3M Length And At Corners Complete All As Specified And As Directed. , Material And Labour For 100Mm Thick Plain Cement Concrete 1:2:4 Type B1 (Using 20Mm Graded Stone Aggregate ) As.In Floor Finishing Even And Smooth With Out Using Extra Cement Provision Of Joint Of Size 10 Mm Wide & 10 Mm Deep And Filling With Bitumen Mastic Joint Filling At Every 3M Length And At Corners Complete All As Specified And As Directed , Material And Labour For 15 Mm Thick Rendering In Cement Mortar (1:4) Fair Faces Of Brick Wall Suerfaces, Finished Even And Smooth Without Using Extra Cement Complete. , Material And Labour For 10Mm Thick Rendering On Other Than Fair Faces Of Brick Wall In Cm 1:6 Finished Even And Smooth With Out Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Rendering 15Mm Thick External In Cm 1:4 On Fair Faces Of Brick/Concrete Surfaces Finished Even And Smooth Without Using Exta Cement With Using Wpc @ 3% By The Wt Of Cement. Wpc Shall Be Measured And Paid Seperately. , Material And Labour For 5Mm Thick Rendering On Fair Faces Of Brick Or Concrete Surface In Cm 1:3 Finished Even And Smooth With Out Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Preparation Of Newly Plastered Surface Of Wall And Applying Three Coats Of White Wash Complete All As Specified And Directed , Material And Labour For Preparation New Plastered Surface Of Wall And Applying Two Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gmaterial And Labouritre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance (Apex Ultima), Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm Over New Surfaces. Etc Complete All As Specified And As Directed , Material And Labour For Preparing Of Newly Plastered Ceiling Surface And Applying Three Coats Of White Wash Complete All As Specified And Directed. , Material And Labour For Preparation Of Old Plastered Surface Of Wall And A Coats Of White Wash Complete All As Specified And Directed , Material And Labour For Complete Removal Of Existing Treatment On Wall Surfaces By Scrapping, Washing & Rubbing Down Including Applying A Layer 1 Mm Wall Care (Putty) For Making The Surface Even & Smooth Etc Complete All As Specified. , Material And Labour For Preparation Old Surface Of Wall And Applying Two Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gmaterial And Labouritre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance (Apex Ultima), Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm Over New Surfaces. Etc Complete All As Specified And As Directed , Material And Labour For Preparing Of Newly Plastered Wall Surface And Applying Two Coats Of Cement Base Paint Over A Coat Of Primer Complete All As Specified And Directed. , Material And Labour For Preparation Of Old Painted Surface Of Steel And Iron By Brooming Down Or Steel Wire Brushing, Scrapping Down Smoke Soot, Moulds, Moss And Efflorescent Salt And Trading Oil And Greasy Spots Of Any Discription, Not Otherwise Described, Over 10Cm In Width Or Girth And Applying One Coat Of Synthetic Enamel Paint, White Or Tinted Complete All As Specified And Directed. , Material And Labour For Preparation Of New Or Previously Un-Treated Steel And Iron Surfaces Of Any Description, Over 10 Cm In Width Or Girth , Not Otherwise Described And Painting With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Etc Complete All As Specified And As Directed , Demolition Of Stone Slabs And Tiles Laid Dry And Dry Or Pointed Of Any Description Or Thickness Infloors, Aprons Etc Complete All As Specified And As Directed. , Demolition Of Brick Work Built In Cement Mortar Including All Quoins, Arches, Pillar Including Coping Etc. Complete All As Specified And As Directed. , Taking Down Door Chowkhat With Shutter Area N-Exc 1.5 Sqm Each(Without Taking Off Shutters From The Frame) Complete All As Specified & Directed. , Demolation Of Cement Concrete (Unreinforced) In Ground Floors And Pavings N Exc 15 Cm Thickness (Below Or Above Ground Level) Complete All As Specified And As Directed. , Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided,Complete All As Specified And As Directed. , Taking Down Cement Plaster Of Any Description On Brick Or Stone Walls Etc Including Racking Out Joints Hacking For Key Scrubbing Down With Water Etc Complete All As Specified And Directed. , Dismantling Old Unserviceable Barbed Wire Fixed In Any Type Of Post Complete All As Specified And Directed
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
12.
Health and Family Welfare #11387303 AOC
Supply Of Furniture To Attached Govt. General Hospital At Asifabad In Komrambheem Asifabad District.-50.00 Attendant Cot With Mattress Scope: This Specification Is For The Requirement Of Iron Cots Suitable For General Purpose In Hospitals. Dimensions: Over All Dimensions Of Cot Of Size Top Frame Shall Be Length 1800 Mm, Width 600 Mm And Height 400 Mm. The Various Tubes Used In Manufacture Of Iron Cots Should Have The Following Outside Diameter And Thickness. Component Outside Dia ( Mm ) Thickness ( Mm ) Four Legs Rectangular 75 X 25 X1.60 Mm Thickness Cross Tubes Cr Tubes 25X25 Mm Sq 1.22Mm Thickness The Ms Flat For Top Shall Be Inside All Four Sides Of Size 50X3 Mm Minimum Thickness Of 3.0 Mm. Material: Frame Work Shall Be Of Cr Sheets Conforming To Is: 513 D Quality. Bows & Rectangle & Square Tubes: These Shall Be Made From Cr Steel Tubes. Shoes: These Shall Be Manufactured From Pvc Shoes. Nominal Height Of The Shoe Shall Be 35 Mm. Outside Dimensions Of 3Mm. Manufacture Manufacture The Bed Frame Shall Be Made From C.R. Sheet Double Bent. It Should Be Reinforced With Two Formed Channels To Size 20 X 50 X 50 X 50 X 20 Mm Of 1.25Mm Thickness Flanges Welded Inside The Length Wise. Overall Sizes Of Mattresses Is ( L ) 1800 Mm X ( W ) 600 Mm X ( H ) 75 Mm Of Pu Foam Of 40 Density, Covered With St Rexine Properly Stitched. Finish As Per General Condition Of Tender 20.00 Alamarah With Acrylic ( Glass ) Door Multi Bend Construction And Inter Locking Design And Full Length Over Lapping Doors And Side. Three Way Bolting Mechanism. Spot Welding & Co2 Welded. Front Side Doors With Acrylic Transparent Sheet All Round Frame 70 Mm Borders Thickness 5.5 Mm Thickness Dimensions Outer: 1980 H X 910 W X 480 D Mm A. Top, Bottom, Lh & Rh Sides And Back Material Thickness- 1 Mm B. Removable Rh & Lh Main Doors With Stiffeners Material Thickness =1.22 Mm Almariahs To Be Provided With 4 Full Fixed Shelves Of Inside Shelve Size Of 908 W X 420 D Of Thickness -1 Mm Cr Steel: Cold Rolled Close Annealed Steel Used For Thickness 0.6 To 1.2 Mm Range As Per Is-513 1994 ( Reaffirmed In 1998 ) . Grade ‘D’ Or ‘Dd’ Quality. Chemical Composition, Tensile Properties, Bend Test, Surface, Flatness, Hardness As Per Is-513 1994. Finish As Per General Condition Of Tender With 3 Years Warranty Finish As Per General Condition Of Tender 15.00 Table ( Office Table Big Size ) Dimensions:1450 W X 680 D X 750 H ( In Millimetres ) Material: A.Plb / Plt - Top 25 Mm Thickness. All Plb And Plt ( Prelaminated Twin ) Is Of Following Grade. Grade Ii Type Ii – Designation – Plb-22 ( As Per Is: 12823 – 1990 ) Each Plb / Plt May Contain Following Material Layers: Particle Board, Top With 2Mm Thick Hot Pressed Pvc Beading With Keyboard Moulded Type. C. Under Structure: This Table Should Be Square Cr Tube 30 X 30 Under Structure With Prime Quality C.R Steel Square Tube 1.22Mm Thickness. D. Storage: 3 Draw & 2 Draw Metal Is Provided For Storage. One Side 2 Draw And Other Side 3 Draw Metal Shall Be Provided. Drawer: • Box-Box-File : Dimensions 390 W X 430 H X 560 D Mm, Construction & Material:Welded Assembled, Crca As Per Is-513.• Back , Sides, Top & Bottom , Box 0.6 Think. Drawer Tray & Front- 0.8 Mm. Crca As Per Is-513 , Drawer Slides Used Must Be Of Heavy Duty Telescopic Channels All Steel Metal Components Are Manufactured From Finest Quality Steel, Which Conforms As Per Is-513 Grade D, Dd All Steel Tubes Used For Desk Under Structures Are As Per Is-3601 – 1984, Is-7138-1973, Is-4923-1985. Shoes - These Shall Be Manufactured From Hard Rubber Or Pvc And Shall Be Uniform In Texture And Chemically Inactive To The Action Of Mild Acids. The Nominal Height Of The Shoes, Shall Be 35Mm. With 3 Years Warranty Finish As Per General Condition Of Tender 25.00 Chairs For Office 1. Seat / Back Assembly: The Seat And Back Are Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood Measured And Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. The Chair Is Available In Three Models. Mid Back Size 47.5 Cm. ( W ) X 58.0 Cm. ( H ) *Pch-9U01rg / 9U02rg / 9U12rg Seat Size 47.0 Cm. ( W ) X 48.0 Cm. ( D ) 2. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Is Moulded With Density = 45±2 Kg / M3 And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. 3. Armrests: The One-Piece Armrests Are Injection Moulded From Black Co-Polymer Polypropylene. 4. Center Tilt Synchro Mechanism ( For 9U01rg / 9U02rg ) : The Mechanism Is Designed With The Following Features: · 360° Revolving Type. · 3 Position Locking · Tilt Tension Adjustment 5. Tubular Frame ( For 9U12rg ) : The Powder Coated ( Dft 40-60 Microns ) Tubular Frame Is Cantilever Type & Made Of Ø 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S. Er.W. Tube. 6. Pneumatic Height Adjustment ( For 9U01rg / 9U02rg ) : The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12.0 ±0.3Cm. 7. Telescopic Bellow Assembly ( For 9U01rg / 9U02rg ) : The Bellow Is 3-Piece Telescopic Type And Injection Moulded In Black Polypropylene. 8. Pedestal Assembly ( For 9U01rg / 9U02rg ) : The Pedestal Is Injection Moulded In Black 33%Glass-Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 66.3 ±0.5Cm. Pitch-Centre Dia. ( 76.3 ±1.0Cm With Castors ) . 9. Twin Wheel Castors ( For 9U01rg / 9U02rg ) : The Twin Wheel Castors Are Injection Moulded In Black Nylon. Overall Dimensions Of Chair Width ( W ) : 76.3 Cm. Depth ( D ) : 76.3 Cm. Height ( H ) : 85.5-97.5 Cm. Seat Height ( Sh ) : 42.5-54.5 Cm Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge. 14.00 Office Chairs S Type With Armrest Seat / Back Assembly: The Seat And Back Are Made From Chemically Treated And Seasoned Wood, Caned And Finished With Teak Melamine Polish And Fitting Is Nuts & Bolts System. Back Size: 38.0Cm ( W ) X 40.0Cm ( H ) . Seat Size: 38.0Cm ( W ) X 42.5Cm ( D ) . Cane For Seat / Back: The Caning Used For Seat / Back Has High Tensile Strength As Per Is:5378 Part Ii, 1990. Cane Breaking Strength = 3000Kg / Mm2 ( Min. ) % Elongation At Break = 25% Armrest Tube ( Enh. Ch-7 ) : The Armrest Tube Is Made Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. Cr. Tube 25.4 Mm 2 Mm Thickness Armrest ( Enh. Ch-7 ) : The Armrest Is Gas-Assisted Injection Moulded From Black Polypropylene. Understructure Assembly: The Under Structure Assembly Is A Cantilever Type Frame Made Of Dia. 25.4Cm. ( 1” ) X 14 Thick Cr Tube.As Per General Condition. Finish As Per General Condition Of Tender 10.00 Office Chairs S Type Without Armrest Seat / Back Assembly: The Seat And Back Are Made From Chemically Treated And Seasoned Wood, Caned And Finished With Teak Melamine Polish And Fitting Is Nuts & Bolts System. Back Size: 38.0Cm ( W ) X 40.0Cm ( H ) . Seat Size: 38.0Cm ( W ) X 42.5Cm ( D ) . Cane For Seat / Back: The Caning Used For Seat / Back Has High Tensile Strength As Per Is:5378 Part Ii, 1990. Cane Breaking Strength = 3000Kg / Mm2 ( Min. ) % Elongation At Break = 25% Understructure Assembly: The Under Structure Assembly Is A Cantilever Type Frame Made Of Dia. 25.4Cm. ( 1” ) X 14 Thick Cr Tube.As Per General Condition. Finish As Per General Condition Of Tender 5.00 Examination Table Scope: This Specification Is For The Requirement Of Patient Examination Table In Hospitals. The Features To Include All The Requirements As Per Examination Table ( Is: 4787-1968 ) With Additional Provisions For Keeping / Storage Places For Minor Medical Equipment. Table, Examination- Table Used For The Purpose Of Examination Of Patients In The Consulting Rooms, Clinics And Side-Rooms Of Hospital Wards. The Main Dimensions Of Examination Table: 1830 ( L ) X 600 ( W ) X 750 ( H ) Mm Overall Sizes Of Mattresses Is ( L ) 1830 Mm X ( W ) 600 Mm X ( H ) 75 Mm Of Pu Foam Of 40 Density, Covered With St Rexine Properly Stitched. Materials: The Steel Cold Rolled Sheet Used For Top And Head Rest Shall Have A Minimum Thickness Of 1.22 Mm. The Thickness. Cold Rolled Steel Tubes Used And Their Corresponding Outside Diameters For Different Parts Shall Be As Given Below: Part Outside Diameter Of Tube ( Mm ) Thickness Of Tube ( Mm ) Vertical Members 31.75 1.2 Horizontal Members 25.40 1.2 Manufacture A- Framework- The Examination Table Shall Have A Framework Of Single Continuous Lengths Of ---- Steel Tubes. At The Floor End, The Four Upright Members Shall Be Connected Together By Longitudinal And Transverse Two Tie Rods And At The Other End These Shall Support A Formed Sheet Metal Top. For Receiving The Sheet Metal Top, The Top Ends Of The Uprights Shall Have An Ms Flat Of 35X3 Mm Thickness Guar Support Rod 10Mm Ms Rod Welded , Thereafter Welded To The Top Can Be Fastened To The Upright Member To The Top So Obtained Study In Construction. The Head Rest Shall Have The Same Construction As The Top And It Shall Be Adjustable On A Rack For Obtaining Various Positions. The Rest Of The Details Shall Be According To 4 Of Ls:4033-1968. Shoes: These Shall Be Manufactured From Pvc / Hard Rubber Bush. Nominal Height Of The Shoe Shall Be 35 Mm. Outside Dimensions Of 3Mm. Mattress: Foam 40 Density Suitable For Use With The Table, 2 Thickness, St Rexene Green Cover To Be Supplied With The Table; All Stitching Shall Be Done With Thread Of Griffon 40 Grade. Finish As Per General Condition Of Tender 50.00 Patient Cot For Adult With Mattress Scope: This Specification Is For The Requirement Of Iron Cots Suitable For General Purpose In Hospitals. Dimensions Over All Dimensions Of Cot Of Size Top Frame ( Sheet ) Shall Be Length 1910 Mm, Width 910 Mm And Height 600 Mm. The Various Tubes Used In Manufacture Of Iron Cots Should Have The Following Outside Diameter And Thickness. Component Outside Dia ( Mm ) Thickness ( Mm ) Bows Outer Cr Tubes -38.10.Mm X 1.60 Mm Cross Tubes Cr Tubes 25.40 X 1.22 Mm Filling Tubes Cr Tubes 19.05 Mm X 1.22Mm The Ms Flat For Top Shall Be Inside All Four Sides Of Size 50X3 Mm Minimum Thickness Of 3.0 Mm. Material: Frame Work Shall Be Of Cr Sheets Conforming To Is: 513 D Quality. Bows & Tubes: These Shall Be Made From Cr Steel Tubes. Shoes: These Shall Be Manufactured From Pvc / Hard Rubber Bush. Nominal Height Of The Shoe Shall Be 35 Mm. Outside Dimensions Of 3Mm. Manufacture Head End: Construction Of The Head End Shall Comply To Meet Requirement Given Bows Shall Be Manufactured From Steel Tubes. It Shall Be Bent, With Inside Radius Of Not More Than 125 Mm At Top 2 Corners Cr Sheet Brackets . Bracket Of 3 Mm Thickness, Shall Be Welded With The Bows Vertical Upright Members Which Allows Frame To Rest On It An Cross Tube: One Horizontal Cross Tube For Making The Structure Of The Bow Rigid Shall Be Welded Between The Vertical Upright Members Of The Bows. Cross Tube Shall Be Welded Below The Sleeping Level At A Height Of 300 Mm From The Bottom. Filling Tubes: The Three Vertical Filling Tubes Shall Be Welded To The Cross Tube And To The Bow. They Should Be Spaced At Regular Intervals. The Height Of The Head End Bow Shall Be About 1075 Mm. Foot End Bow: It Shall Be Similar To 4.1.1 To 4.1.3 Except Leg Bows, Which Shall Be Of 810 Height. Mattress Platform: This Shall Comply With The Requirements Given Below:- The Bed Frame Shall Be Made From C.R. Sheet Double Bent. It Should Be Reinforced With Three Formed Channels To Size 20 X 50 X 50 X 50 X 20 Mm Of 1.25Mm Thickness Flanges Welded Inside The Length Wise. 50.00 Revolving Stool Seat / Back Assembly: The Seat And Back Are Made Up Of 1.2 +0.1 Cm. Thick Hot-Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18 And Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Is Designed With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. Overall Size: 1220 H X 500W X 460 D High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Is Moulded With Density = 45±2 Kg / Nr And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. Armrests: The One-Piece Armrests Are Injection Moulded From Black Co-Polymer Polypropylene. Center Tilt Synchro Mechanism: The Mechanism Is Designed With The Following Features: 360° Revolving Type. Upright Position Locking 1 Tilt Tension Adjustment Seat / Back Tilting Ratio Of 1:3. Tubular Frame: The Powder Coated ( Dft 40-60 Microns ) Tubular Frame Is Cantilever Type & Made Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S. Er.W. Tube. Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12.0±0.3Cm. Telescopic Bellow Assembly: The Bellow Is 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. Pedestal Assembly: The Pedestal Is Cr Sheet U Bend 2 Mm Thickness Chromium Coated And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 66.3 ±0.5Cm. Pitch-Centre Dia. ( 76.3 ±1.0Cm With Castors ) . Twin Wheel Castors ) : The Twin Wheel Castors Are Injection Moulded In Black Nylon. Finish As Per General Condition Of Tender 50.00 Patient Attendant Stool The Stool Shall Be Used For Bed Side Of The Patient For Their Attendants To Sit. Material Frame Work: As Given In Clause 1.1 Of General Requirements For Hospital Furniture. Top: Stainless Steel Sheet Conforming To Designation 04Cr18ni 10 Or 07Cr18 Ni9 And Shall Have A Thickness Of 1.20Mm. It Shall Also Conform To Of The General Requirements Of Hospital Furniture. Legs: The Legs And Supports Shall Be Made Of Square Pipe Of Size 25 X 25 X 1.6Mm Shoes: These Shall Be Manufactured From Hard Rubber Or Pvc And Shall Be Uniform In Texture And Chemically Inactive To The Action Of Mild Acids. The Nominal Height Of The Shoes, Shall Be 35 Mm. Dimensions. Top: 300Mm X 300Mm Height: 500Mm Height Manufacture: The Frame Work Of Stool Shall Have A Single Continuous Lengths Of Cr Steel Tubes As Shown In Figures Of Indian Standards. At The Floor End, The Four Upright Members Shall Be Connected Together By Longitudinal And Transverse Tie Rods Finish As Per General Condition Of Tender 40.00 3 Seater Visitor Chair Supply Of Orbit 3 Seater Visitors Chair, *Cushioned Seat And Back *Silver Grey Finish With Arms Model No. Sj-708La Of Featherlite / Godrej Or Equavalent As Directed By The Engineer-In-Charge. With 3 Years Warranty Finish As Per General Condition Of Tender 20.00 Open Rack Steel Slotted Angular Racks, Open Type With 6 Shelves Making 5 Compartments Of Size 1800Mm X 900Mm X 450 Mm, Cr Sheet Shelfs 1.2Mm Thickness With An Angle Of 2 Mm Thickness And Size: 40 Mm X 60 Mm, With 8 Corner Brackets Of 2 Mm Thickness. Finish: Sheet Metal Components: All Dents, Burrs And Sharp Edges Shall Be Removed From The Various Components. The Components Shall Be Individually Pickled, Scrubbed And Rinsed To Remove Grease, Rust, Scale Or Any Other Foreign Element. Immediately After Pickling, All The Mild Steel Parts Shall Be Given Phosphate Treatment Conforming To Class C Or Is : 3618-1966. The Process For Application Of Phosphate Coating Shall Be In Accordance With Is: 6005-12970. Two Coats To Enamel Paint ( Colour Grey Is Preferred ) Shall Then Be Applied As Follows: Finish Coat With Enamel Paint Conforming To Is : 151-1950, Is : 2932-1974 Or Is : 2933-1975. In The Case Of Stoving Enamel The Components Shall Thereafter Be Backed At A Specified Temperature In An Over Heated Uniformly. The Finish Shall Be Smooth And Uniform With A Hard And Touch Film Of Enamel, Strongly Adhering To The Surface. The Finish Shall Be Free From All Visible Defects And Shall Not Chip When Tapped Lightly With A Dull Pointed Instrument. Note: Putty Shall Be Applied To All The Surfaces Requiring Filling And Shall Conform To Is: 110-1968. Tests: The Performance Tests Required For The Finished Racks Shall Be Carried Out As Per The Methodology Mentioned In The Is 6189:1985. The Rack Shall Have A Name Plate Or Label Fixed To It Showing The Manufacturer’S Name, Initials Or Recognized Trademark. Hospital Furniture Items Shall Be Subjected To Tests In Accordance With The Requirements Of Relevant Specifications. However, The Painted Furniture Items Shall Also Satisfy The Adhesion Test And In Addition Satisfy The Performance Test Give Below: Shoes: These Shall Be Manufactured From Pvc / Hard Rubber Bush. Nominal Height Of The Shoe Shall Be 35 Mm. Outside Dimensions Of 3Mm. With 3 Years Warranty Finish As Per General Condition Of Tender 4.00 Table For Immunization / Fp / Counselling Dimensions: 900 W X 590 D X 750 H Mm Material : A ) Plb / Plt – Top Impregnated Base 18Mm Thickness With 2Mm Thick Hot Pressed Pvc Beading C ) Understructure : This Table Comes With A Square Tube Understructure With Prime Quality C.R Tube Steel. All Steel Tubes Used For Desk Under Structures Are As Per Is-3601-1984, Is- 7138-1973, Is-4923-1985. Top Frame And Legs :30 X 30 C.R Square Tube 1.2Mm Thickness With Two Foot Steps. 5.00 Table For Seminar / Conference Hall Conference Hall Table Size: 2100 X 1200 X 740 Mm. Table Top :- The Top Of The Table Shall Be Made Of 38 Mm Composite Mdf ( 25Mm Plain Mdf Board + 12Mm Plain Mdf ) With Pvc Membrane 0.4Mm Thick Pvc Membrane Foil Using Wrap Around Technology. The Foil Is Pre-Coated With Pu Layer For Better Scratch And Wear Resistance. 0.6Mm Balancing Laminate On Bottom Surface. Understructure :- The Legs Of The Table Shall Be 25 Mm Thk , Post Formed Particle Board With Round Edge. Modesty Panel :- The Modesty Panel Of The Table Shall Be 600Mm High Made Of 18Mm Thk Prelam Particle Board. Vertibrae Fixed To Work Surface From Bottom Side For Entering Wires The Wire Carrying Is Facilitated Through The Hollow Space Between Plastic Components.
Contract Date: Ref. Documents Contract Value : 26.89 Lakh
Government Departments No of Bidders 1
14.
Drinking Water Supply and Sanitation #11348134 Technical Bid
Tender for E-Quotation For Seeking Firm Rates Of Plant & Machinery And Materials Category Items For Preperation/Amendment Of Schedule Of Rate For The Year 2026. , M 1055 - Pumps Supplying Submersible Pump Sets Confirming To Is 8034 And Motor Confirming To Is 9283. Pump Shall Be Suitable For Various Delivery Head And Discharge With Stainless Steel Pump Shaft And Polypropylene/ Noryl Impeller. Motor Suitable For Working On 415V+10%, 3Ph, 50 Hz, A.C. Supply With Cable Guard, Thrust Carbon/ Fiber Bearing To Withstand Entire Hydraulic Thrust, Water Proof Winding Shall Be Provided. The Pump Set Shall Be Suitable For Direct Coupling. Pump Shall Have Suitable Outlet As Per Manufacturers Design. Anti Thrust Stream Lined Non Return Valve Shall Be Provided With Pump. 3 Meter Submersible Copper Conductor Cable In Single/ Double Run Shall Be Provided With Each Pump. , Submersible Pump Set 100 Mm Dia (With Polypropylene/ Noryl Impeller) Up To 20 Stages 1 H.P. , 1.5 Hp , 2.5 Hp , 3.0 Hp , 4.0 Hp , 5.0 Hp , Submersible Pump 150 Mm Dia (With Bronze/Ss Impeller) Up To 8 Stages , 1.5 Hp , 2.0 Hp , 3.0 Hp , 4.0 Hp , 5.0 Hp , 6.0 Hp , 7.5 Hp , M 1056 - Pressure Guage Providing Fabricating, Testing And Commisioning Pressure Vessel Fabricating In M.S Plate On Providing Foundation Including Epoxy Paint , Pressure Gauge (100 Mm Dia) , Pressure Gauge (150 Mm Dia) , Vacuum / Combination Gauge , M 1057 - Lifting Equipment Chain Pulley Block Supplying Triple Spur Gear Type Chain Pulley Block Suitable For Capacity As Below With 3 M Lift Complete With Load Chain And Hand Chain Suitable For Above Lift, Tested To 50% Over Load As Per Is 3832 Carrying Isi Mark. , 1 Tonne Capacity , 2 Tonne Capacity , 3 Tonne Capacity , Electric Operated Circular Or Rectangular Travelling Crane (Single Girder) Supplying Single Girder Electrically Operated Rectangular Over Head Travelling Crane With 6 M Lift Complete With Wire Rope Hoist, Class Ii Duty, All Three Motions Electrically Operated By Suitable Rating Motor Ip 54, Control Panel And Down Pendant Control Block. , 5 Tonne Capacity , Above 6 M Up To 8 M Span , Above 8 M Up To 10 M Span , 7.5 Tonne Capacity , Above 6 M Upto 8 M Span , Above 8 M Up To 10 M Span , 10 Tonne Capacity , Above 6 M Up To 8 M Span , Above 8 M Up To 10 M Span , M 1058 - Lightening Arrester, Ab Switch, Insulators , Lightening Arrestor Supplying, Erecting Approved Make Thyrite Type Lightening Arrestor Suitable For H.T. Supply With Necessary Ancillary Material Complete On Provided Cross Arm And Connected To Overhead Line. , Suitable For 11 Kv Supply, Distribution Class , Suitable For 22 Kv Supply, Distribution Class , Suitable For 33 Kv Supply, Station Class , Disc Insulator. Supplying, Erecting Porcelain Disc Type Insulators With Hardware Fittings Suitable For H.T. Overhead Line Complete Erected With Nuts And Bolts On Provided Cross Arm , Suitable For 11Kv Line , Suitable For 33Kv Line , Pin Insulator Supplying, Erecting Porcelain Pin Type Insulators With Hardware Fittings Suitable For H.T. Overhead Line Complete Erected With Nuts And Bolts On Provided Cross Arm , Suitable For 11Kv Line , Suitable For 33Kv Line , Air Break Switch Without Earth Switch Supplying, Erecting Approved Make H.T. Outdoor Type Gang Operated Air Break Triple Pole Switch Of Required Capacity With 3 Post / Pin Type Insulator Per Phase , Mounted In Horizontal Or Vertical Position On Provided Cross Arm With Adequate Length Of G.I. Pipe For Operating Handle Erected On Extended Square Shaft. The Operating Handle Provided With Lock And Key At Suitable Height From Ground With Necessary Clamps , Suitable For 11Kv Line , Rocking / Tilting Type , Rotating Type , Suitable For 33Kv Line , Rocking / Tilting Type , Rotating Type , Air Break Switch With Earth Switch Supplying, Erecting Approved Make H.T. Outdoor Type Gang Operated Air Break Triple Pole Switch With Earth Switch Of Required Capacity With 3 Post / Pin Type Insulator Per Phase , Mounted In Horizontal Or Vertical Position On Provided Cross Arm With Adequate Length Of G.I. Pipe For Operating Handle Erected On Extended Square Shaft. The Operating Handle Provided With Lock And Key At Suitable Height From Ground With Necessary Clamps , Suitable For 11 Kv Line , Rotating Type , Suitable For 33 Kv Line , Rotating Type , Drop Out Fuse (Channel Mounted) Supplying, Erecting Approved Make Out Door Type Drop Out Fuse Channel Type With Insulator Complete With Fuse Holders Fuse Barrel With Metal Fittings, Fuse Element, With Working Current Up To 50 Amp, Capacity Complete Erected On Provided Cross Arm, Each Set Comprising 3 Units , Suitable For 11 Kv Line , Suitable For 33 Kv Line , Horn Gap Fuse (Channel Mounted) Supplying, Erecting Approved Make Out Door Type Horn Gap Type Fuse With Insulator, Fuse Element, With Working Current Up To 50 Amp, Capacity Complete Erected On Provided Cross Arm, Each Set Comprising 3 Units , Suitable For 11 Kv Line , Suitable For 33 Kv Line , M 1059 - Transformer Power Transformer (With Off Load Tap Changer) Any Isi Mark , Supplying Outdoor Type Copper Wound Transformer Continuously Rated For 3Ph, 50 Hz, At Full Load And Temp. Rise Not Exceeding 45 Degree C By Thermometer In Oil And 50 Degree C By The Resistance In Winding After Continuous Run At Full Load Rating, The Transformer Should Have Oil Immersed Winding Having Vector Group Dy11, Ht Side Connected In Delta And Lt Side Connected In Star With Neutral Brought Out Connected To Provide Separate Earthing. The Transformer Shall Have Power Terminal Arrangement, Bushing/ Cable End Box On Ht Side And Cable End Box On Lt Side. 2 Nos Channels With Stoppers Shall Be Provided And Fixed On The Provided Plinth For Mounting The Transformer. The Transformer Should Have Following Standard Fittings. Transformer Shall Be Latest Manufacturing Standards As Per Amended Is Specifications And The Load & No Load Losses Shall Be Limited To The Values Given Below Or As Per Is Or Norms Issed By Seb Which Ever Are Lower- 1. Oil Conservator With Filling Hole With Cap And Plain Oil Level Gauge. 2. Silica Gel Dehydrating Breather Charged With Silica Gel. 3. Oil Drain Valve 4. Oil Filter Valve 5. Lifting Eyes/ Hooks 6. Two Earthing Terminals 7. Diagram And Rating Plate 8. Air Vent 9. Explosion Vent 10. 100Mm Dia Thermo Meter With Thermometer Pocket 11. Four arc-biannual rate contract Directional Plain Roller. , Power Transformer 11000/433 Volts With Off Load Tap Changer - 12.5% To +2.5% In Steps Of 2.5% As Per Bis Level-2. , 63 Kva , 100 Kva , 160 Kva , 200 Kva , 250 Kva , 315 Kva , 500 Kva , 630 Kva , 750/800 Kva , Power Transformer (With On Load Tap Changer) Supplying Outdoor Type Copper Wound Transformer Continuously Rated For 3Ph, 50 Hz, At Full Load And Temp. Rise Not Exceeding 45 Degree C By Thermometer In Oil And 50 Degree C By The Resistance In Winding After Continuous Run At Full Load Rating, The Transformer Should Have Oil Immersed Winding Having Vector Group Dy11, Ht Side Connected In Delta And Lt Side Connected In Star With Neutral Brought Out Connected To Provide Separate Earthing. The Transformer Shall Have Power Terminal Arrangement, Bushing/ Cable End Box On Ht Side And Cable End Box On Lt Side. 2Nos Channels With Stoppers Shall Be Provided And Fixed On The Provided Plinth For Mounting The Transformer. The Transformer Should Have Following Standard Fittings. The Oltc Should Be Suitable For Minimum 50 Operations Per Day. Transformer Shall Be Latest Manufacturing Standards As Per Amended Is Specifications And The Load & No Load Losses Shall Be Limited To The Values Given Below Or As Per Is Or Norms Issued By Seb Which Ever Are Lower- , 1. Oil Conservator With Filling Hole With Cap And Plain Oil Level Gauge. 2. Silica Gel Dehydrating Breather Charged With Silica Gel. 3. Oil Drain Valve 4. Oil Filter Valve 5. Lifting Eyes/ Hooks 6. Two Earthing Terminals 7. Diagram And Rating Plate 8. Air Vent 9. Explosion Vent 10. 100Mm Dia Thermo Meter With Thermometer Pocket 11. Four arc-biannual rate contract Directional Plain Roller. 12. Buchholz Relay 13. Resistance Temp. Detector 14. Marshalling Box 15. Automatic Voltage Regulator (Avr) 16. Remote Tap Changing Controller (Rtcc) , Transformer 11000/433 Volts With On Load Tap Changer - 15% To +5% In Steps Of 1.25% With Rtcc, Avr And Marshalling Box And Other Specification , 750/800 Kva , 1000 Kva , 1250 Kva , 1600 Kva , 2000 Kva , M 1060 - Motors Foot Mounted Motors Tefc 1500 Rpm Supplying Foot Mounted Tefc 1500 Rpm, Squirrel Cage Induction Motor, Conforming To Is 325 Having Continuous Rating Suitable For Operation At 415 Volts ± 10%, 3 Phase, 50 Hz ± 3% With F Class Insulation Temperature Rise Limited To Class B Insulation. Motors Conform To Is-12615 With Efficiency Level Ie3 And Provided With Enclosure Protection Class Ip-55. , 15 Kw (20 Hp) , 18.5 Kw ( 25 Hp) , 22 Kw ( 30 Hp) , 30 Kw ( 40 Hp) , 37 Kw ( 50 Hp) , 45 Kw ( 60 Hp) , 55 Kw ( 75 Hp) , 75 Kw ( 100 Hp) , 90 Kw ( 120 Hp) , 110 Kw ( 150 Hp) , 132 Kw ( 180Hp ) , 160 Kw ( 215 Hp ) , M 1061 - Aluminium Cable Cable - Aluminium Conductor Three Core, Xlpe / Pvc Insulated & Armoured Cable . Supplying Xlpe / Pvc Insulated, Armoured Cable 1100 V Grade With Isi Mark Three Core, Solid / Stranded Aluminium Conductor With 6 Mm Thick 25 Mm Width M.S. Spacer With G.I. Earth Wire 6 Sq Mm, Complete In An Approved Manner. , 3 Core 2.5 Sq Mm , 3 Core 4 Sq Mm , 3 Core 6 Sq Mm , 3 Core 10 Sq Mm , 3 Core 16 Sq Mm , 3 Core 25 Sq Mm , 3 Core 35 Sq Mm , 3 Core 50 Sq Mm , 3 Core 70 Sq Mm , 3 Core 95 Sq Mm , 3 Core 120 Sq Mm , 3 Core 150 Sq Mm , 3 Core 185 Sq Mm , 3 Core 240 Sq Mm , 3 Core 300 Sq Mm , 3 Core 400 Sq Mm , Ht Aluminium Three Core 3.3 Kve Cable Xlpe Insulated Supplying Ht Aluminium Three Core Cable Xlpe Insulated ,Insulation Screened With Extruded Semi Conducting Compound In Combination With Copper Tape (0.3 Ka For 1 Sec.) Cores Laidup Inner Sheath Of Pvc Tape ,Galvanised Steel Flat Strip Armoured,And Overall Pvc Sheathed Cable Conforming To Is :7098 /Ii/85 With Latest Amendments , 3 Core 70 Sq Mm , 3 Core 95 Sq Mm , 3 Core 120 Sq Mm , 3 Core150sq Mm , 3 Core 185 Sq Mm , 3 Core 240Sq Mm , 3 Core 300 Sq Mm , 3 Core 400 Sq Mm , M 1062 - Copper Cable Cable , 3 Core Pvc Insulated, Pvc Sheathed Copper Conductor Flat Submersible Cable . Supplying , Flat Flexible Submersible Cable With, Copper Conductor, Pvc Insulated, And Pvc Sheathed . , 3 Core 1.5 Sq Mm , 3 Core 2.5 Sq Mm , 3 Core 4 Sq Mm , 3 Core 6 Sq Mm , 3 Core 10 Sq Mm , 3 Core 16 Sq Mm , 3 Core 25 Sq Mm , 3 Core 35 Sq Mm , Copper Conductor Three Core, Xlpe / Pvc Insulated & Unarmoured Cable Supplying Xlpe / Pvc Insulated, Unarmoured Cable 1100 V Grade With Isi Mark Three Core, Solid / Stranded Copper Conductor With 6 Mm Thick 25 Mm Width M.S. Spacer With G.I. Earth Wire 6 Sq Mm, Complete In An Approved Manner. , 3 Core 1.5 Sq Mm , 3 Core 2.5 Sq Mm , 3 Core 4 Sq Mm , 3 Core 6 Sq Mm , 3 Core 10 Sq Mm , 3 Core 16 Sq Mm , 3 Core 25 Sq Mm , 3 Core 35 Sq Mm , 3 Core 50 Sq Mm , 3 Core 70 Sq Mm , 3 Core 95 Sq Mm , Copper Conductor 3.5 Core, Xlpe / Pvc Insulated & Armoured Cable . Supplying Xlpe / Pvc Insulated, Armoured Cable 1100 V Grade With Isi Mark 3.5 Core, Solid / Stranded Copper Conductor With 6 Mm Thick 25 Mm Width M.S. Spacer With G.I. Earth Wire 6 Sq Mm, Complete In An Approved Manner , 3.5 Core 25 Sq Mm , 3.5 Core 35 Sq Mm , 3.5 Core 50 Sq Mm , 3 .5 Core 70 Sq Mm , 3.5 Core 95 Sq Mm , 3.5 Core 120 Sq Mm , 3 .5 Core150sq Mm , 3.5 Core 185 Sq Mm , 3.5 Core 240Sq Mm , 3.5 Core 300 Sq Mm , 3.5 Core 400 Sq Mm , Copper Conductor 3.5 Core Xlpe/Pvc Unarmoured Supplying Xlpe / Pvc Insulated, Unarmoured Cable 1100 V Grade With Isi Mark 3.5 Core, Solid / Stranded Copper Conductor With 6 Mm Thick 25 Mm Width M.S. Spacer With G.I. Earth Wire 6 Sq Mm, Complete In An Approved Manner. , 3.5 Core 25 Sq Mm , 3.5 Core 35 Sq Mm , 3.5 Core 50 Sq Mm , 3.5 Core 70 Sq Mm , 3.5 Core 95 Sq Mm , 3.5 Core 120 Sq Mm , 3.5 Core150sq Mm , 3.5 Core 185 Sq Mm , 3.5 Core 240Sq Mm , 3.5 Core 300 Sq Mm , 3.5 Core 400 Sq Mm , Copper Conductor Three Core, Xlpe / Pvc Insulated & Armoured Cable . Supplying Xlpe / Pvc Insulated, Armoured Cable 1100 V Grade With Isi Mark Three Core, Solid / Stranded Copper Conductor With 6 Mm Thick 25 Mm Width M.S. Spacer With G.I. Earth Wire 6 Sq Mm, Complete In An Approved Manner. , 3 Core 1.5 Sq Mm , 3 Core 2.5 Sq Mm , 3 Core 4 Sq Mm , 3 Core 6 Sq Mm , 3 Core 10 Sq Mm , 3 Core 16 Sq Mm , 3 Core 25 Sq Mm , 3 Core 35 Sq Mm , 3 Core 50 Sq Mm , 3 Core 70 Sq Mm , 3 Core 95 Sq Mm , 3 Core 120 Sq Mm , 3 Core 150Sq Mm , 3Core 185 Sq Mm , 3 Core 240 Sq Mm , 3 Core 300 Sq Mm , 3 Core 400 Sq Mm , M 1063 - Foot Valve Supplying C.I. Foot Valve Having Single Leather Flap And Gunmetal Seating. Valve Shall Be Fixed On Suction Side Of Pump As Per Requirement Including Jointing Material And Hardware. , Flanged Type , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , 150 Mm , M 1064 - Air Circuit Breaker Acb Breaking Capacity 50Ka Thermal Magnetic Manual Draw Out Type 3 Pole , 1000A , 1250A , 1600A , 2000A , M 1065 - Starter D.O.L. Starter With Ss Enclosure With 380/415 Volt Coil , 5 To 10 Hp , Supplying Fully Automatic Star Delta Starter To Operate Induction Motor Working On 415V,3Phase,50 Hz With No Volt Coil, Over Load Element, On-Off Push Buttons, With Necessary Materials And Connected To Supply, Etc Complete Starter With Original Sheet Steel Encloser F.A.S.D Starter , 10 Hp , 20 Hp , 25 Hp , 40 Hp , 50 Hp , 75 Hp , 100 Hp , 125 Hp , 150 Hp , 250 Hp , M 1066 - Servo Controlled Automatic Voltage Stabilizer Providing, Erecting Servo Controlled Automatic Voltage Stabiliser Suitable For Out Put Voltage Of 415 Volt ± 1%, 3 Ph, 50 Hz, With Copper Wound Transformer (Air/Oil Cooled) As Mentioned Below. The Stabilizer Shall Function Satisfactorily Even If Incoming Supply Is Unbalanced Between Phases Within Range Of 10%. The Stabilizer Should Be Constructed In Cubical Box, With Bidirectional Wheels For Easy Handling, Necessary Monitors And Users Controls On Front Panel Such As Indication, Alarm, Volt Meter And Selector Switch For Measuring Input And Out Put Voltage, Auto/Manual Selector Switch, Raise/Low Push Buttons Etc. Suitable Capacity Termination Strips And Bus Bars For Incoming And Out Going Cable Should Be Provided. All Three Phases Shall Be Independently Monitored And Corrected. Following Protections And Indications Shall Be Incorporated 􀂌 Over Voltage / Under Voltage 􀂌 Single Phasing 􀂌 Cut Off Contactor With Electronic Output Sensing Unit , Servo Controlled Automatic Voltage Stabiliser(Out Put 415 ± 1%) Input 150 / 220 To 450 / 460 Volt , 30 Kva Air Cooled , 40 Kva Air Cooled , 50 Kva Oil Cooled , 60 Kva Oil Cooled , 75 Kva Oil Cooled , 100 Kva Oil Cooled , 125 Kva Oil Cooled , Servo Controlled Automatic Voltage Stabiliser (Out Put 415 ± 1%) Input 280 To 450/460 Volt , 15 Kva Air Cooled , 20 Kva Air Cooled , 30 Kva Air Cooled , 40 Kva Air Cooled , 50Kva Air Cooled , 60 Kva Oil Cooled , 75Kva Oil Cooled , 100 Kva Oil Cooled , 125 Kva Oil Cooled , 150 Kva Oil Cooled , 200Kva Oil Cooled , M 1067 - Termination Kit Providing And Errecting In-Door Type Termination Kit, For 3.3Kv/ 6.6 Kv / 11Kv/ 22Kv/33Kv Xlpe Screened 3 Core Cable , In-Door Termination Kit For 3.3Kv(E/Ue) / 6.6 Kv(E) Xlpe 3 Core Cable , 25-50 Mm² , 70-120 Mm² , 150-185 Mm² , 240-400 Mm² , Out-Door Termination Kit For 3.3(E/Ue)/6.6 Kv(E) Xlpe 3 Core Cable , 25-50 Mm² , 70-120 Mm² , 150-185 Mm² , 240-400 Mm² , Straight Through Joint For 3.3Kv(E/Ue)/ 6.6 Kv(E) Xlpe 3 Core Cable , 25-50 Mm² , 70-120 Mm² , 150-185 Mm² , 240-300 Mm² , In Door Termination Kit For 11Kv(E) Xlpe Screened 3 Core Cable , 25-50 Mm² , 70-120 Mm² , 150-185 Mm² , 240-400 Mm² , Out Door Termination Kit For 11Kv(E) Xlpe Screened 3 Core Cable , 25-50 Mm² , 70-120 Mm² , 150-185 Mm² , 240-400 Mm² , Straight Through Joint For 11 Kv(E) Xlpe Screened 3 Core Cable , 25-50 Mm² , 70-120 Mm² , 150-185 Mm² , 240-300 Mm² , In Door Termination Kit For 22Kv(E) Xlpe Screened 3 Core Cable , 25-50 Mm² , 70-120 Mm² , 150-185 Mm² , 240-400 Mm² , Out Door Termination Kit For 22Kv(E) Xlpe Screened 3 Core Cable , 25-50 Mm² , 70-120 Mm² , 150-185 Mm² , 240-400 Mm² , Straight Through Joint For 22 Kv(E) Xlpe Screened 3 Core Cable , 25-50 Mm² , 70-95 Mm² , 120-150 Mm² , 185-240 Mm² , 300-400 Mm² , In Door Termination Kit For 33Kv(E) Xlpe Screened 3 Core Cable , 25-50 Mm² , 70-95 Mm² , 120-185 Mm² , 240-400 Mm² , Out Door Termination Kit For 33 Kv(E) Xlpe Screened 3 Core Cable , 25-50 Mm² , 70-95 Mm² , 120-185 Mm² , 240-400 Mm² , Straight Through Joint For 33 Kv(E) Xlpe Screened 3 Core Cable , 35-70 Mm² , 95-150 Mm² , 185-240 Mm² , 240-300 Mm²
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
15.
Housing Urban and Rular Development #11346479 Technical Bid
Tender for Construction Of Modular Ot Eye Under Old Sadar Hospital At Deoghar For The Year-2025-26. , Egp. Puff Panels For O.T Wall Walls &Ceiling , Supply, Installation, Testing And Commissioning Of Modular Ot Walland Corner Panels With Insulated Prefabricated Puff Panels. The Ot Wall Shall Be Constructed Using Egp Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The Panel Of The Theatre Shall Be Sufficient For , G.I. Puff Panels For Ot Ceiling , Modular Ot Ceiling Panels With Insulated Prefabricated Puff Panels. The Ot Ceiling Shall Be Constructed Using Gi Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The , Antibacterial / Antifungal Paint. , Providing And Establishing Anti-Bacterial & Anti Fungicidal Sterile Coating Of Liquid Plastic Paint On Gi Puff/Ss Panel Of Modular Ot. The Paint Should Be Seamless, Easy To Clean, Should Have Vapor Permeability Which Allows Substrate Moisture To Escape And Protects Against Growth Of Bacteria, Mound And Yeasts, Moisture Resistance, Freeze / Thaw Resistance. Anti- Bacterial Anti Microbial Quality Should Remain Active Throughout The Life Of The Product. Vapors Permeable Structure Should Allow Damp Substrates To Dry Out Without Causing Blistering. It Should Tolerate Cleaning With Hospital Chemical Agents. Filling Of All Joints And Cavities Should Be With Metallic Epoxy Filler And Sand Casted Flush To Provide A Joint-Less Finish. This Should Include All Fittings, Accessories, Hardware, Support Structures, Etc. Required For Installation. Anti-Bacterial And Anti-Fungus Sterile Coating Shall Be Applied On The Finished Walls & Ceiling With At Least 2-3 Coats To Achieve A Thickness Of Minimum 200 Micron. Before Application Of Sterile Wall Coating An Appropriate Primer Shall Be Applied. The Primer Shall Be Supplied Along With The Paint And Should Be Of The Same Make As That Of Paint. And Shall Be Applied Prior To Coating Of Anti-Bacterial & Anti- Fungus Sterile Paint On Walls & Ceiling 2-3 Coats Shall Be Applied To Achieve A Thickness Of 200 , Laminar Air Flow , The Range Of Ventilated Ceiling Should Provide The Sterility And Cleanliness Required For Ot Environ Ment. Perfect Tightness Should Be Guaranteed By A N Epoxy Seal Between Filters And Holding Structure Disabling €Œby Pass†Of Hepa Filters. Two Nos . Pressure Measurement Ports Shall Be Provided In Each Housingairflow: 50 +-10% Fpm Class 100/Iso C Lass 5 As Per International Standard & Meets Din 1 946-4. D.O.P. Tested Point To P Oint Scanned Minipleat Hepa Filters Having Followi Ng Technical Specifications To Be Fixed In Above H Ousings F Rame € Aluminium. Type € Flange Type. Media € Micro Fiber Glass . Se Aling Of Media € By Means Of Epoxy. I.P.D. - 15 Mm Wg. F.P.D. € 50 Mm Wg. Separators € Concealed Al. Or Hot Melt G Lue. Capacity € 500 Cfm Size Of Laf - 2400 X 2400 Mmthe Work Should Be Executed As Per The Direction Of Enginee R In Charge , Homogeneous Conductive Pvc Vinyl Flooring In O.T.,Icu,Opd. , Providing And Fixing 2 Mm Thick Homogeneous Conductive Pvc Jeoflor Electro + Sd Roll Acts As A Continous Conductive 10^6 Rt10^8. It Has Preminum Antistatic Properites, ( 100 V) The Product Has To Be Groundedwith An Esd Copper Strip( Cf. Finishes To Meet Its Full Performance The Product Is Non Reactive To Residual Indentation With A Value 0.02 Mm. The Flooring Is A Group Twear Rating Suitableheavey Duty Trafficareasand Bfi-S1 Fire Resisteance. The Product Is Non -Emissive Of Volatile Organic Compounds With 10Ug/M2 ( Tvoc After 28 Days Iso 1000-6.Total Thickness En428 2Mm, En 430 G/Sq.M 2900, Width 426 Cm/Lm 200/20, En (European Standard) En 685 Classs 34-43, Fire Rating En1081 0Hm 1^^6 Rt 10^8 Make Jeo Flor Esd Coundictive Flooring , Writing White Board. , Supply & Installation Of Writing Unit/White Boardof Size 900/600 Mm Having 1.60 Mm Thick White Laminate Board Top, Bonded To A 40 Mm High Density Fiber Board Sheet For Additional Rigidity. The Unit Should Open To Create A Wall Mounted Writing Surface Within The Operating Room. The Work Should Be Executed As Per The Direction Of Engineer-In-Charge. , Storage Unit . , Supply And Installation Of Storage Unit Of Ss 304Of Reputed Make And Having Size 1665 X 865 X350 Mm And Having Two Or More Glass Shelves Of Toughened Glass 10 Mm Thick, Supported With D Type Bracket (Ss 304 Grade) With 10 Mm Thickness And Rubber Gasket Of 2Mm And Mounted Flush On Wall. The Work Should Be Executed As Per The Directions Of Engineer-In-Charge. , Pressure Release Damper. , Supply, Installation, Testing & Commissioning Of Ss Fabricated Cascade Pressure Stabilizer Having Ss Blades To Control Operation Theatre Room - Air Pressure Of Approved Make As Per Tech. Specs Attached. , Peripheral Lights (Dimmable). , Supplying & Fixing Of Sturdy Writing Board Of Size: 840Mm X 640Mm With Perfect Marker Writing Surface In Front And Back Is Laminated To Make Water Proof Surface. The Board Has To Be Provided With Anodized Aluminium Framing And Its Back Should Have Hooks For Wall Hanging Of Approved Make And Type Directly On Wall , Ahu With Outdoor Unit Ac 11.5 Tr Including Insttalation , Double Skin Air Handling Unit :Supply, Installatio N, Testing And Commissioning Of Double Skin Constr Uction Air Handling Units. With Inner Sheet Ss 304 And Ouer Sheet Ppgi With 40 Mm Panel Thickness With Mixing Box With Fa,Ra,Sa Dampers, Fitted With 2 Stage Filteration Arrangment Completed With 10 Micron Filters 5 Mico Nfilter After Fan Section. Suitable For Outdoor In Stallation With 45 Mm Thick Panels With Inner Skin 0.6Mm Thick Aluminium Sheet, Thermal Breack And W Eather Proof.Motor Efficiency Factor - Ie-2Â- Mix Ing Box With Manually Operated Fresh & Return Air Al Dampers.Â- Filter Section With 50 Mm Thick Box Type Pre-Filter (Merv-8) & 305 Mm Thick Rigid Med Ia Type Fine Filter (Merv-10) Mounted On A Common Filter Frame & Viscous/ Wasable Synthetic Type Air Pre-Filterâ- Coil Section With 8 Row Deep Dx Coi L . Fin Material - Plain Aluminium Fin Spacing - 1 1-13 Fpi, Condensing Tray - 22G Ss304, Test Pressu Re - 38Kg/Sq.Cm. Insulation Material For Drain Tra Y-13Mm Thick Close Cell Nitrile Rubber.Â- Uv Lamp , Aluminum Ductiing 22 Gaze , Ducting : ( Al. Sheet Metal )Ducting:- Supply And Fixing Of Site Fabricatedal Sheet Metal Ducts In A Ccordance With Theapproved Shop Drawings And As Re Quired As Per Specifications.All Necessary Gi /Ms Supports Using Thread Rods (As Directed). Angle, F Lat, And Anchor Bolts, Food Grade Neoprene Gaskets , Food Grade Adhesive Included In The Scope. , Insulation , Underdeck Insulation :Supplying And Fixing Of Unde Rdeck Roof Insulation Of 13 Mm Thickness Of Mat Fi Nish Closed Cell Antimicrobile Nitrile Rubber ( Cl Ass O ) Insulation On Existing Surface After App Lying Two Coats Of Cold Setting Adhesive As Requir Ed. , Surgical Scrub (2 Bay). , Supplying, Fixing Installation, Testing Andcommissioning Of Scrub Sink With The Following Specifications:- Compact Surgical Scrub Sink Should Be Designed For Use In Ot Complex For Pre Procedural Scrub Up. (Double Sink Combination Size 1600 Mm X 450Mm X 1650 Mm Back Height& 1200 Mm And Front Heightas Suitable) €¢ Each Fixture Should Be Fabricated From Heavy Gauge Type 304 Stainless Steel (Minimum Thickness1.5Mm) And Should Be Seamless Welded Construction, Polished To A Satin Finish €¢ The Scrub Sink Should Be Provided With A Front Access Panel Which Should Be Easily Removed For Access To The Water Controlled Valve, Waste Connections, Stoppers And Strainers.€¢ Hands Free Operation Should Include Infra-Red Sensors With Programmable Adjustment.€¢ Thermostatic Mixing, Valve Control Should Be Located Behind The Access Panel And Maintain Constant Water Temperature.€¢ Timing Should Be Adjustable To Meet Individual Application Requirements.€¢ Provided With Infrared Sensors, Thermostatic Control Taps With Feel Safe Temperature Controls With Foam Flow Attachments And Provide With Betadine Dispensers .€¢ All Units Should Have Reduced Anti- Splash Fronts. €¢ Knee/Foot Operated Switch Should Be Provided Additionally. The Work , Sliding Type Hermitically Sealed Ot Door (Autometic) , Supply & Fixing Of Sliding Type Ot Door Having High Density Particle Board Cores, High Pressure Laminate Face On Both Sides, Viewing Window 300 X 300Mm. Standard Size: 1500 X 2100 Mm (W X H) , Surgeon Control Panel. , Supply, Installation, Testing & Commissioning Of Multi Colour Coded Surgeon Control Membrane Touch Panel, Flushed In The Theatre Wall Comprising Of The Following Features & As Per Technical Specification Attached: 1. Display Of Day Clock 2. Display Of Elapse Time Clock 3. Dimmer For Peripheral Lights 4. Medical Gas Alarm 5. Hands Free Telephone 6. Indicator For Temperature & Humidity. , X-Ray View Screen. , Supply, Installation, Testing & Commissioning Of Twin Plate X- Ray Viewing Screen Designed To Provide A High Level Of Control Luminance Without Flickering & As Per The Technical Specification Attached. X-Ray View Screen (Two Screen) Led Overall Dimensions (Lxhxt) 880 X 503 X 29Mm View Area (Wxh) : 736 X 440 Mm Light Source : Led Power Consumption / Input Power : 30W / Ac 100-240V Illumination Intensity : 5,500 Lux Approx. , Surgeon Pendent , Providing & Fixing Of Singale Arm Multi Moveable Surgeons Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthesia Pendant . , Providing & Fixing Of Single Arm (900Mm) Anaesthesia Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthsia Trolley: Made Of Composite Laminate - Overall Size 950Mmx600mmx570mm H - Cosmokartz Or Equivalent , Eye Ot Table Opthal Ot Table , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro- Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type Water Proof Rubber Mattress 1 Pc. 1 Pair 2 Pcs. 1 Pair 1 Pair 1 Pair 1 Set , Instrument Trolley Fully Ss - Double Shelf, Three Sides Railings., Mounted On 5 Diawheels , Two With Brakes, Size 30X18X36H All 304Gss , Led Operating Light , Providing & Installation Of Led Operating Light Having Maximum Illuminance (1M): 160,000 + 160,000 Lux At 1M Distance, Electrical Power: 150 + 90 W, Power Consumption: 2X 11 A, Fitting: Ceiling Anchoring Ring Ceiling Pendant With 2 Brackets And 2 Spring Arms, Range Of Movement: 1X 360° / 1X 330°, Recommended Room Height: At Least 2.45 M, Max. Ceiling Load: 2X 218 Nm / 650 N, Light Body Weight: 9.2 + 7.5Kgs, Light Body Depth: 1X 130 Cm / 1X 140 Cm, Air Shielding Surface: 2 X 330 Cm2 Transformers: 2X 450Va/230V/26V, Brightness Regulator: 2X 20 - 500 Va (Primary Voltage), Provided With 2 Sterilisable Handles With Each Dome, Easy Positioning By Sterilisable Handle, Focus Adjustable By Sterilisable Handle, Life Time Of Bulbs : 45,000 Hours Etc As Per Technical Specifications Attached , Electrical Works & Distribution Board : Supply Laying, Fixing And Testing Of Flexible Copper Wire Thick 2.5Mm Single Core For Equipment,Electrical Power Control , Lights, As Per Requirement , Floor Mate (Icu/Ot Grade) Paint Should Not React With Betadine (Yellow Patch Of Betadine One Floor Looks Very Ankwred) , Glove Box , Multiple Electric Plug Points (65A) For Carm Lithoclast Lap Tower With Complete Electrical Fittings. , Add 18% Gst (In Basic Rate Must Fill 0.18) , Add 1% Labour Cess (In Basic Rate Must Fill 0.01)
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 5
16.
Housing Urban and Rular Development #11346477 Technical Bid
Tender for Construction Of Modular Ot (Eye) Under Sub Divisional Hospital At Madhupur Dist Deoghar For The Year-2025-26. , Egp. Puff Panels For O.T Wall Walls &Ceiling , Supply, Installation, Testing And Commissioning Of Modular Ot Walland Corner Panels With Insulated Prefabricated Puff Panels. The Ot Wall Shall Be Constructed Using Egp Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The Panel Of The Theatre Shall Be Sufficient For , G.I. Puff Panels For Ot Ceiling , Modular Ot Ceiling Panels With Insulated Prefabricated Puff Panels. The Ot Ceiling Shall Be Constructed Using Gi Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The , Antibacterial / Antifungal Paint. , Providing And Establishing Anti-Bacterial & Anti Fungicidal Sterile Coating Of Liquid Plastic Paint On Gi Puff/Ss Panel Of Modular Ot. The Paint Should Be Seamless, Easy To Clean, Should Have Vapor Permeability Which Allows Substrate Moisture To Escape And Protects Against Growth Of Bacteria, Mound And Yeasts, Moisture Resistance, Freeze / Thaw Resistance. Anti- Bacterial Anti Microbial Quality Should Remain Active Throughout The Life Of The Product. Vapors Permeable Structure Should Allow Damp Substrates To Dry Out Without Causing Blistering. It Should Tolerate Cleaning With Hospital Chemical Agents. Filling Of All Joints And Cavities Should Be With Metallic Epoxy Filler And Sand Casted Flush To Provide A Joint-Less Finish. This Should Include All Fittings, Accessories, Hardware, Support Structures, Etc. Required For Installation. Anti-Bacterial And Anti-Fungus Sterile Coating Shall Be Applied On The Finished Walls & Ceiling With At Least 2-3 Coats To Achieve A Thickness Of Minimum 200 Micron. Before Application Of Sterile Wall Coating An Appropriate Primer Shall Be Applied. The Primer Shall Be Supplied Along With The Paint And Should Be Of The Same Make As That Of Paint. And Shall Be Applied Prior To Coating Of Anti-Bacterial & Anti- Fungus Sterile Paint On Walls & Ceiling 2-3 Coats Shall Be Applied To Achieve A Thickness Of 200 , Laminar Air Flow , The Range Of Ventilated Ceiling Should Provide The Sterility And Cleanliness Required For Ot Environ Ment. Perfect Tightness Should Be Guaranteed By A N Epoxy Seal Between Filters And Holding Structure Disabling €Œby Pass†Of Hepa Filters. Two Nos . Pressure Measurement Ports Shall Be Provided In Each Housingairflow: 50 +-10% Fpm Class 100/Iso C Lass 5 As Per International Standard & Meets Din 1 946-4. D.O.P. Tested Point To P Oint Scanned Minipleat Hepa Filters Having Followi Ng Technical Specifications To Be Fixed In Above H Ousings F Rame € Aluminium. Type € Flange Type. Media € Micro Fiber Glass . Se Aling Of Media € By Means Of Epoxy. I.P.D. - 15 Mm Wg. F.P.D. € 50 Mm Wg. Separators € Concealed Al. Or Hot Melt G Lue. Capacity € 500 Cfm Size Of Laf - 2400 X 2400 Mmthe Work Should Be Executed As Per The Direction Of Enginee R In Charge , Homogeneous Conductive Pvc Vinyl Flooring In O.T.,Icu,Opd. , Providing And Fixing 2 Mm Thick Homogeneous Conductive Pvc Jeoflor Electro + Sd Roll Acts As A Continous Conductive 10^6 Rt10^8. It Has Preminum Antistatic Properites, ( 100 V) The Product Has To Be Groundedwith An Esd Copper Strip( Cf. Finishes To Meet Its Full Performance The Product Is Non Reactive To Residual Indentation With A Value 0.02 Mm. The Flooring Is A Group Twear Rating Suitableheavey Duty Trafficareasand Bfi-S1 Fire Resisteance. The Product Is Non -Emissive Of Volatile Organic Compounds With 10Ug/M2 ( Tvoc After 28 Days Iso 1000-6.Total Thickness En428 2Mm, En 430 G/Sq.M 2900, Width 426 Cm/Lm 200/20, En (European Standard) En 685 Classs 34-43, Fire Rating En1081 0Hm 1^^6 Rt 10^8 Make Jeo Flor Esd Coundictive Flooring , Writing White Board. , Supply & Installation Of Writing Unit/White Boardof Size 900/600 Mm Having 1.60 Mm Thick White Laminate Board Top, Bonded To A 40 Mm High Density Fiber Board Sheet For Additional Rigidity. The Unit Should Open To Create A Wall Mounted Writing Surface Within The Operating Room. The Work Should Be Executed As Per The Direction Of Engineer-In-Charge. , Storage Unit . , Supply And Installation Of Storage Unit Of Ss 304Of Reputed Make And Having Size 1665 X 865 X350 Mm And Having Two Or More Glass Shelves Of Toughened Glass 10 Mm Thick, Supported With D Type Bracket (Ss 304 Grade) With 10 Mm Thickness And Rubber Gasket Of 2Mm And Mounted Flush On Wall. The Work Should Be Executed As Per The Directions Of Engineer-In-Charge. , Pressure Release Damper. , Supply, Installation, Testing & Commissioning Of Ss Fabricated Cascade Pressure Stabilizer Having Ss Blades To Control Operation Theatre Room - Air Pressure Of Approved Make As Per Tech. Specs Attached. , Peripheral Lights (Dimmable). , Supplying & Fixing Of Sturdy Writing Board Of Size: 840Mm X 640Mm With Perfect Marker Writing Surface In Front And Back Is Laminated To Make Water Proof Surface. The Board Has To Be Provided With Anodized Aluminium Framing And Its Back Should Have Hooks For Wall Hanging Of Approved Make And Type Directly On Wall , Ahu With Outdoor Unit Ac 11.5 Tr Including Insttalation , Double Skin Air Handling Unit :Supply, Installatio N, Testing And Commissioning Of Double Skin Constr Uction Air Handling Units. With Inner Sheet Ss 304 And Ouer Sheet Ppgi With 40 Mm Panel Thickness With Mixing Box With Fa,Ra,Sa Dampers, Fitted With 2 Stage Filteration Arrangment Completed With 10 Micron Filters 5 Mico Nfilter After Fan Section. Suitable For Outdoor In Stallation With 45 Mm Thick Panels With Inner Skin 0.6Mm Thick Aluminium Sheet, Thermal Breack And W Eather Proof.Motor Efficiency Factor - Ie-2Â- Mix Ing Box With Manually Operated Fresh & Return Air Al Dampers.Â- Filter Section With 50 Mm Thick Box Type Pre-Filter (Merv-8) & 305 Mm Thick Rigid Med Ia Type Fine Filter (Merv-10) Mounted On A Common Filter Frame & Viscous/ Wasable Synthetic Type Air Pre-Filterâ- Coil Section With 8 Row Deep Dx Coi L . Fin Material - Plain Aluminium Fin Spacing - 1 1-13 Fpi, Condensing Tray - 22G Ss304, Test Pressu Re - 38Kg/Sq.Cm. Insulation Material For Drain Tra Y-13Mm Thick Close Cell Nitrile Rubber.Â- Uv Lamp , Aluminum Ductiing 22 Gaze , Ducting : ( Al. Sheet Metal )Ducting:- Supply And Fixing Of Site Fabricatedal Sheet Metal Ducts In A Ccordance With Theapproved Shop Drawings And As Re Quired As Per Specifications.All Necessary Gi /Ms Supports Using Thread Rods (As Directed). Angle, F Lat, And Anchor Bolts, Food Grade Neoprene Gaskets , Food Grade Adhesive Included In The Scope. , Insulation , Underdeck Insulation :Supplying And Fixing Of Unde Rdeck Roof Insulation Of 13 Mm Thickness Of Mat Fi Nish Closed Cell Antimicrobile Nitrile Rubber ( Cl Ass O ) Insulation On Existing Surface After App Lying Two Coats Of Cold Setting Adhesive As Requir Ed. , Surgical Scrub (2 Bay). , Supplying, Fixing Installation, Testing Andcommissioning Of Scrub Sink With The Following Specifications:- Compact Surgical Scrub Sink Should Be Designed For Use In Ot Complex For Pre Procedural Scrub Up. (Double Sink Combination Size 1600 Mm X 450Mm X 1650 Mm Back Height& 1200 Mm And Front Heightas Suitable) €¢ Each Fixture Should Be Fabricated From Heavy Gauge Type 304 Stainless Steel (Minimum Thickness1.5Mm) And Should Be Seamless Welded Construction, Polished To A Satin Finish €¢ The Scrub Sink Should Be Provided With A Front Access Panel Which Should Be Easily Removed For Access To The Water Controlled Valve, Waste Connections, Stoppers And Strainers.€¢ Hands Free Operation Should Include Infra-Red Sensors With Programmable Adjustment.€¢ Thermostatic Mixing, Valve Control Should Be Located Behind The Access Panel And Maintain Constant Water Temperature.€¢ Timing Should Be Adjustable To Meet Individual Application Requirements.€¢ Provided With Infrared Sensors, Thermostatic Control Taps With Feel Safe Temperature Controls With Foam Flow Attachments And Provide With Betadine Dispensers .€¢ All Units Should Have Reduced Anti- Splash Fronts. €¢ Knee/Foot Operated Switch Should Be Provided Additionally. The Work , Sliding Type Hermitically Sealed Ot Door (Autometic) , Supply & Fixing Of Sliding Type Ot Door Having High Density Particle Board Cores, High Pressure Laminate Face On Both Sides, Viewing Window 300 X 300Mm. Standard Size: 1500 X 2100 Mm (W X H) , Surgeon Control Panel. , Supply, Installation, Testing & Commissioning Of Multi Colour Coded Surgeon Control Membrane Touch Panel, Flushed In The Theatre Wall Comprising Of The Following Features & As Per Technical Specification Attached: 1. Display Of Day Clock 2. Display Of Elapse Time Clock 3. Dimmer For Peripheral Lights 4. Medical Gas Alarm 5. Hands Free Telephone 6. Indicator For Temperature & Humidity. , X-Ray View Screen. , Supply, Installation, Testing & Commissioning Of Twin Plate X- Ray Viewing Screen Designed To Provide A High Level Of Control Luminance Without Flickering & As Per The Technical Specification Attached. X-Ray View Screen (Two Screen) Led Overall Dimensions (Lxhxt) 880 X 503 X 29Mm View Area (Wxh) : 736 X 440 Mm Light Source : Led Power Consumption / Input Power : 30W / Ac 100-240V Illumination Intensity : 5,500 Lux Approx. , Surgeon Pendent , Providing & Fixing Of Singale Arm Multi Moveable Surgeons Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthesia Pendant . , Providing & Fixing Of Single Arm (900Mm) Anaesthesia Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthsia Trolley: Made Of Composite Laminate - Overall Size 950Mmx600mmx570mm H - Cosmokartz Or Equivalent , Eye Ot Table Opthal Ot Table , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro- Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type Water Proof Rubber Mattress 1 Pc. 1 Pair 2 Pcs. 1 Pair 1 Pair 1 Pair 1 Set , Instrument Trolley Fully Ss - Double Shelf, Three Sides Railings., Mounted On 5 Diawheels , Two With Brakes, Size 30X18X36H All 304Gss , Led Operating Light , Providing & Installation Of Led Operating Light Having Maximum Illuminance (1M): 160,000 + 160,000 Lux At 1M Distance, Electrical Power: 150 + 90 W, Power Consumption: 2X 11 A, Fitting: Ceiling Anchoring Ring Ceiling Pendant With 2 Brackets And 2 Spring Arms, Range Of Movement: 1X 360° / 1X 330°, Recommended Room Height: At Least 2.45 M, Max. Ceiling Load: 2X 218 Nm / 650 N, Light Body Weight: 9.2 + 7.5Kgs, Light Body Depth: 1X 130 Cm / 1X 140 Cm, Air Shielding Surface: 2 X 330 Cm2 Transformers: 2X 450Va/230V/26V, Brightness Regulator: 2X 20 - 500 Va (Primary Voltage), Provided With 2 Sterilisable Handles With Each Dome, Easy Positioning By Sterilisable Handle, Focus Adjustable By Sterilisable Handle, Life Time Of Bulbs : 45,000 Hours Etc As Per Technical Specifications Attached , Electrical Works & Distribution Board : Supply Laying, Fixing And Testing Of Flexible Copper Wire Thick 2.5Mm Single Core For Equipment,Electrical Power Control , Lights, As Per Requirement , Floor Mate (Icu/Ot Grade) Paint Should Not React With Betadine (Yellow Patch Of Betadine One Floor Looks Very Ankwred) , Glove Box , Multiple Electric Plug Points (65A) For Carm Lithoclast Lap Tower With Complete Electrical Fittings. , Add 18% Gst (In Basic Rate Must Fill 0.18) , Add 1% Labour Cess (In Basic Rate Must Fill 0.01)
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 5
17.
Housing Urban and Rular Development #11346476 Technical Bid
Tender for Construction Of Modular Ot (General & Gynae) At Chc Under Sarwan Block At Deoghar For The Year-2025-26. , Egp. Puff Panels For O.T Wall Walls &Ceiling , Supply, Installation, Testing And Commissioning Of Modular Ot Walland Corner Panels With Insulated Prefabricated Puff Panels. The Ot Wall Shall Be Constructed Using Egp Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The Panel Of The Theatre Shall Be Sufficient For , G.I. Puff Panels For Ot Ceiling , Modular Ot Ceiling Panels With Insulated Prefabricated Puff Panels. The Ot Ceiling Shall Be Constructed Using Gi Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The , Antibacterial / Antifungal Paint. , Providing And Establishing Anti-Bacterial & Anti Fungicidal Sterile Coating Of Liquid Plastic Paint On Gi Puff/Ss Panel Of Modular Ot. The Paint Should Be Seamless, Easy To Clean, Should Have Vapor Permeability Which Allows Substrate Moisture To Escape And Protects Against Growth Of Bacteria, Mound And Yeasts, Moisture Resistance, Freeze / Thaw Resistance. Anti- Bacterial Anti Microbial Quality Should Remain Active Throughout The Life Of The Product. Vapors Permeable Structure Should Allow Damp Substrates To Dry Out Without Causing Blistering. It Should Tolerate Cleaning With Hospital Chemical Agents. Filling Of All Joints And Cavities Should Be With Metallic Epoxy Filler And Sand Casted Flush To Provide A Joint-Less Finish. This Should Include All Fittings, Accessories, Hardware, Support Structures, Etc. Required For Installation. Anti-Bacterial And Anti-Fungus Sterile Coating Shall Be Applied On The Finished Walls & Ceiling With At Least 2-3 Coats To Achieve A Thickness Of Minimum 200 Micron. Before Application Of Sterile Wall Coating An Appropriate Primer Shall Be Applied. The Primer Shall Be Supplied Along With The Paint And Should Be Of The Same Make As That Of Paint. And Shall Be Applied Prior To Coating Of Anti-Bacterial & Anti- Fungus Sterile Paint On Walls & Ceiling 2-3 Coats Shall Be Applied To Achieve A Thickness Of 200 , Laminar Air Flow , The Range Of Ventilated Ceiling Should Provide The Sterility And Cleanliness Required For Ot Environ Ment. Perfect Tightness Should Be Guaranteed By A N Epoxy Seal Between Filters And Holding Structure Disabling €Œby Pass†Of Hepa Filters. Two Nos . Pressure Measurement Ports Shall Be Provided In Each Housingairflow: 50 +-10% Fpm Class 100/Iso C Lass 5 As Per International Standard & Meets Din 1 946-4. D.O.P. Tested Point To P Oint Scanned Minipleat Hepa Filters Having Followi Ng Technical Specifications To Be Fixed In Above H Ousings F Rame € Aluminium. Type € Flange Type. Media € Micro Fiber Glass . Se Aling Of Media € By Means Of Epoxy. I.P.D. - 15 Mm Wg. F.P.D. € 50 Mm Wg. Separators € Concealed Al. Or Hot Melt G Lue. Capacity € 500 Cfm Size Of Laf - 2400 X 2400 Mmthe Work Should Be Executed As Per The Direction Of Enginee R In Charge , Homogeneous Conductive Pvc Vinyl Flooring In O.T.,Icu,Opd. , Providing And Fixing 2 Mm Thick Homogeneous Conductive Pvc Jeoflor Electro + Sd Roll Acts As A Continous Conductive 10^6 Rt10^8. It Has Preminum Antistatic Properites, ( 100 V) The Product Has To Be Groundedwith An Esd Copper Strip( Cf. Finishes To Meet Its Full Performance The Product Is Non Reactive To Residual Indentation With A Value 0.02 Mm. The Flooring Is A Group Twear Rating Suitableheavey Duty Trafficareasand Bfi-S1 Fire Resisteance. The Product Is Non -Emissive Of Volatile Organic Compounds With 10Ug/M2 ( Tvoc After 28 Days Iso 1000-6.Total Thickness En428 2Mm, En 430 G/Sq.M 2900, Width 426 Cm/Lm 200/20, En (European Standard) En 685 Classs 34-43, Fire Rating En1081 0Hm 1^^6 Rt 10^8 Make Jeo Flor Esd Coundictive Flooring , Writing White Board. , Supply & Installation Of Writing Unit/White Boardof Size 900/600 Mm Having 1.60 Mm Thick White Laminate Board Top, Bonded To A 40 Mm High Density Fiber Board Sheet For Additional Rigidity. The Unit Should Open To Create A Wall Mounted Writing Surface Within The Operating Room. The Work Should Be Executed As Per The Direction Of Engineer-In-Charge. , Storage Unit . , Supply And Installation Of Storage Unit Of Ss 304Of Reputed Make And Having Size 1665 X 865 X350 Mm And Having Two Or More Glass Shelves Of Toughened Glass 10 Mm Thick, Supported With D Type Bracket (Ss 304 Grade) With 10 Mm Thickness And Rubber Gasket Of 2Mm And Mounted Flush On Wall. The Work Should Be Executed As Per The Directions Of Engineer-In-Charge. , Pressure Release Damper. , Supply, Installation, Testing & Commissioning Of Ss Fabricated Cascade Pressure Stabilizer Having Ss Blades To Control Operation Theatre Room - Air Pressure Of Approved Make As Per Tech. Specs Attached. , Peripheral Lights (Dimmable). , Supplying & Fixing Of Sturdy Writing Board Of Size: 840Mm X 640Mm With Perfect Marker Writing Surface In Front And Back Is Laminated To Make Water Proof Surface. The Board Has To Be Provided With Anodized Aluminium Framing And Its Back Should Have Hooks For Wall Hanging Of Approved Make And Type Directly On Wall , Ahu With Outdoor Unit Ac 11.5 Tr Including Insttalation , Double Skin Air Handling Unit :Supply, Installatio N, Testing And Commissioning Of Double Skin Constr Uction Air Handling Units. With Inner Sheet Ss 304 And Ouer Sheet Ppgi With 40 Mm Panel Thickness With Mixing Box With Fa,Ra,Sa Dampers, Fitted With 2 Stage Filteration Arrangment Completed With 10 Micron Filters 5 Mico Nfilter After Fan Section. Suitable For Outdoor In Stallation With 45 Mm Thick Panels With Inner Skin 0.6Mm Thick Aluminium Sheet, Thermal Breack And W Eather Proof.Motor Efficiency Factor - Ie-2Â- Mix Ing Box With Manually Operated Fresh & Return Air Al Dampers.Â- Filter Section With 50 Mm Thick Box Type Pre-Filter (Merv-8) & 305 Mm Thick Rigid Med Ia Type Fine Filter (Merv-10) Mounted On A Common Filter Frame & Viscous/ Wasable Synthetic Type Air Pre-Filterâ- Coil Section With 8 Row Deep Dx Coi L . Fin Material - Plain Aluminium Fin Spacing - 1 1-13 Fpi, Condensing Tray - 22G Ss304, Test Pressu Re - 38Kg/Sq.Cm. Insulation Material For Drain Tra Y-13Mm Thick Close Cell Nitrile Rubber.Â- Uv Lamp , Aluminum Ductiing 22 Gaze , Ducting : ( Al. Sheet Metal )Ducting:- Supply And Fixing Of Site Fabricatedal Sheet Metal Ducts In A Ccordance With Theapproved Shop Drawings And As Re Quired As Per Specifications.All Necessary Gi /Ms Supports Using Thread Rods (As Directed). Angle, F Lat, And Anchor Bolts, Food Grade Neoprene Gaskets , Food Grade Adhesive Included In The Scope. , Insulation , Underdeck Insulation :Supplying And Fixing Of Unde Rdeck Roof Insulation Of 13 Mm Thickness Of Mat Fi Nish Closed Cell Antimicrobile Nitrile Rubber ( Cl Ass O ) Insulation On Existing Surface After App Lying Two Coats Of Cold Setting Adhesive As Requir Ed. , Surgical Scrub (2 Bay). , Supplying, Fixing Installation, Testing Andcommissioning Of Scrub Sink With The Following Specifications:- Compact Surgical Scrub Sink Should Be Designed For Use In Ot Complex For Pre Procedural Scrub Up. (Double Sink Combination Size 1600 Mm X 450Mm X 1650 Mm Back Height& 1200 Mm And Front Heightas Suitable) €¢ Each Fixture Should Be Fabricated From Heavy Gauge Type 304 Stainless Steel (Minimum Thickness1.5Mm) And Should Be Seamless Welded Construction, Polished To A Satin Finish €¢ The Scrub Sink Should Be Provided With A Front Access Panel Which Should Be Easily Removed For Access To The Water Controlled Valve, Waste Connections, Stoppers And Strainers.€¢ Hands Free Operation Should Include Infra-Red Sensors With Programmable Adjustment.€¢ Thermostatic Mixing, Valve Control Should Be Located Behind The Access Panel And Maintain Constant Water Temperature.€¢ Timing Should Be Adjustable To Meet Individual Application Requirements.€¢ Provided With Infrared Sensors, Thermostatic Control Taps With Feel Safe Temperature Controls With Foam Flow Attachments And Provide With Betadine Dispensers .€¢ All Units Should Have Reduced Anti- Splash Fronts. €¢ Knee/Foot Operated Switch Should Be Provided Additionally. The Work , Sliding Type Hermitically Sealed Ot Door (Autometic) , Supply & Fixing Of Sliding Type Ot Door Having High Density Particle Board Cores, High Pressure Laminate Face On Both Sides, Viewing Window 300 X 300Mm. Standard Size: 1500 X 2100 Mm (W X H) , Surgeon Control Panel. , Supply, Installation, Testing & Commissioning Of Multi Colour Coded Surgeon Control Membrane Touch Panel, Flushed In The Theatre Wall Comprising Of The Following Features & As Per Technical Specification Attached: 1. Display Of Day Clock 2. Display Of Elapse Time Clock 3. Dimmer For Peripheral Lights 4. Medical Gas Alarm 5. Hands Free Telephone 6. Indicator For Temperature & Humidity. , X-Ray View Screen. , Supply, Installation, Testing & Commissioning Of Twin Plate X- Ray Viewing Screen Designed To Provide A High Level Of Control Luminance Without Flickering & As Per The Technical Specification Attached. X-Ray View Screen (Two Screen) Led Overall Dimensions (Lxhxt) 880 X 503 X 29Mm View Area (Wxh) : 736 X 440 Mm Light Source : Led Power Consumption / Input Power : 30W / Ac 100-240V Illumination Intensity : 5,500 Lux Approx. , Surgeon Pendent , Providing & Fixing Of Singale Arm Multi Moveable Surgeons Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthesia Pendant . , Providing & Fixing Of Single Arm (900Mm) Anaesthesia Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthsia Trolley: Made Of Composite Laminate - Overall Size 950Mmx600mmx570mm H - Cosmokartz Or Equivalent , Eye Ot Table Opthal Ot Table , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro- Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type Water Proof Rubber Mattress 1 Pc. 1 Pair 2 Pcs. 1 Pair 1 Pair 1 Pair 1 Set , Multi Purpose Ot Table With C - Arm Compitable , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro-Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type , Instrument Trolley Fully Ss - Double Shelf, Three Sides Railings., Mounted On 5 Diawheels , Two With Brakes, Size 30X18X36H All 304Gss , Led Operating Light , Providing & Installation Of Led Operating Light Having Maximum Illuminance (1M): 160,000 + 160,000 Lux At 1M Distance, Electrical Power: 150 + 90 W, Power Consumption: 2X 11 A, Fitting: Ceiling Anchoring Ring Ceiling Pendant With 2 Brackets And 2 Spring Arms, Range Of Movement: 1X 360° / 1X 330°, Recommended Room Height: At Least 2.45 M, Max. Ceiling Load: 2X 218 Nm / 650 N, Light Body Weight: 9.2 + 7.5Kgs, Light Body Depth: 1X 130 Cm / 1X 140 Cm, Air Shielding Surface: 2 X 330 Cm2 Transformers: 2X 450Va/230V/26V, Brightness Regulator: 2X 20 - 500 Va (Primary Voltage), Provided With 2 Sterilisable Handles With Each Dome, Easy Positioning By Sterilisable Handle, Focus Adjustable By Sterilisable Handle, Life Time Of Bulbs : 45,000 Hours Etc As Per Technical Specifications Attached , Electrical Works & Distribution Board : Supply Laying, Fixing And Testing Of Flexible Copper Wire Thick 2.5Mm Single Core For Equipment,Electrical Power Control , Lights, As Per Requirement , Floor Mate (Icu/Ot Grade) Paint Should Not React With Betadine (Yellow Patch Of Betadine One Floor Looks Very Ankwred) , Glove Box , Multiple Electric Plug Points (65A) For Carm Lithoclast Lap Tower With Complete Electrical Fittings. , Add 18% Gst (In Basic Rate Must Fill 0.18) , Add 1% Labour Cess (In Basic Rate Must Fill 0.01)
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 5
18.
Defence #11344413 Technical Bid
Tender for Surface Excavation N.Exc (Not Exceeding) 30 Cm Deep And Averaging 15Cm Deep And Getting Out In Hard/Dense Soil, Complete All As Specified And Directed. , Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Hard/Dense Soil Complete All As Specified And Directed. , Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm Complete All As Specified And Directed. , Excavating In Post Holes Each N Exc 0.5 Cum Getting Out, Returning Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceedings 25Cm Watering And Removing Surplus Soil To Distance N Exc 50 M And Making Good Surface In Hard/Dense Soils Complete All As Specified And Directed. , Removing Excavated Material N Exc. 50M And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point, Complete All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) In Ground Floors And Pavings Not Exc 15Cm Thickness (Below Or Above Ground Level) Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Timber Scantling 40 Sqcm And Over In Section In Any Position Framed Work, Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Unframed Work In Fillets, Rails, Posts, Rafters, Purlins Etc Under 40Sqcm In Section, Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Boarding Any Description, Fixed With Any Position With Nails, Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Plain Or Corrugated Steel Sheeting, Any Gauge, Thickness Including Nanital Pattern Or Similar Pattern Roof Covering, Complete All As Specified And Directed By Engr-In-Charge. , M&L For Hardcore Of Gauge N Exc. 63 Mm Of Broken Stone Or Boulders, Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rammed To A True Surface, Complete All As Specified And Directed. , M&L For Cement Concrete 1:4:8 Type D2 (40 Mm Graged Aggregate) As In Foundation And Filling Mass Concrete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Plain Cement Concrete Type C2, 1:3:6 (40Mm Graded Aggregate) (M-10) As In Foundation , Filling And Mass Concrete And Similar Work , All As Specified And Directed. , M&L Foer Plain Cement Concrete Type B2, 1:2:4 (40Mm Graded Stone Aggregate) As In Foundations, Filling And Mass Concrete, Complete All As Specified And Directed. , M&L For Type C1, 1:3:6 (20Mm Graded Aggregate) Pre-Cast Cement Concrete Block Masonry With Solid Blocks, Exc. 10 Cm In Width And Setting In Mortar, Complete Complete All As Specified And Directed. , M&L For Type B1, 1:2:4 (20Mm Graded Aggregate) Pre-Cast Cement Concrete With Hollow Block Masonry, Exc. 10 Cm In Width And Setting In Cm 1:6, Complete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc.; Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Beams, Cantilevers, Bressummers, Lintels Over 1.5M Span Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Columns, Pillars, Piers, Posts And Struts Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Flat Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Sup- Ports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc. Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Square, Rectangula Or Polygonal Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions Complete All As Specified And Directed By Engr-In-Charge. , M&L For Second Class Hard Wood In Scantling, Clean Sawn, Timber Framed And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 2Nd Class Hardwood Plain, Solid, Straight Chowkats And Frames, Wrought Framed Rebated On The Solid, Rounded Or Chamfered Put Together With Glue Pinned At Joints, Complete All As Specified And Directed By Engr-In-Charge. , S&F 30Mm Thick 2Nd Class Hardwood, Glazed And Skelton Shutters, Open Rebated And Prepared To Receive Glass, Gauze Etc (Without Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc Size Of Members Of Shuters As Specified In Ssr Part-I, Section 8, Clause 8.24(A), Fittted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. , S&F 30Mm Thick 2Nd Class Hardwood, Plain Framed, Framed, Panelled Shutter (Any Number Of Panels) With Panels Of Timber Flat On Both Sides (Feather Edged) Or Of Veneered Particle Board Medium Density, Wood Particle Board With Commercial Face Veneers Fitted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Chowkhats With Shutters (Without Taking Off Shutters From The Frame) Not Exc 1.5 Sqm Each, Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Chowkhats With Shutters (Without Taking Off Shutters From The Frame) Exc 1.5 Sqm But Not Exc 4.00 Sqm Each, Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Wall/Ceiling Panelling And Similar Work Complete All As Specified And Directed By Engr-In-Charge. , S&F Pvc Wall Lining Consisting Of 5Mm Thick Plain Colour Pvc Sheet Inclusive Of Solvent Cemtn And Fixing At Sit Eon Pvc Frame As Per Specifications And Drawing, Complete All As Specified And Directed By Engr-In-Charge. , S&F 5Mm Thnick Pvc Sheet Fillet Of Width 35Mm For Wall Panelling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing Complete All As Specified And Directed By Engr-In-Charge. , S&F 100Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 200Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 250Mm Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 75Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. , S&F 125Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. , S&F 100Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. , S&F 150Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. , S&F Mild Steel Work As Hand Rails, Half Round Or Other Steel Section Or Core For Wooden Hand-Rail Straight Portion, Drilled And Countersunk For Balusters Running Bars, For Doors, Balusters, Nosing To Steps Including Embeding In Concrete And Screwing Etc. Wind Ties For Roof Including Securing Bolts; Posts And Struts In Fencing Including Cutting Tops To Shape As Directed, Drilling Holes, Notching For Wire, Etc.; Flat Iron Fillets (For Securing Wire Mesh Etc.) Including All Necessary Drilling, Bolting Or Riveting, Etc., And Similar Work Conforming To Fe-290 Gde E-165 Complete All As Specified And Directed By Engr-In-Charge. , S&F Bands, Straps, Supports Or Stays For Rainwater, Ventilating Pipes, Including Bolts, If Required Hooks (Stay), Heavy, For Large Gates; Hook And Pintle Hinges: Large Hasps And Staples; Chains; Hand Made Sliding Bolts; Clamps; Hold Fasts; Wall Ties; Hooks For Hanging Fans; Plain Angle Cleats For Securing Purlins To Wood Trusses Or Rafters; Knee Piece Inserts; Two Way And Three Way Straps, Plate Washers And Similar Small Articles Conforming To Fe-290 Gde-E-165, Complete All As Specified And Directed. , S&F Mild Steel Tmt Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed By Engr-In-Charge. , S&F Mild Steel Tmt Bars 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed By Engr-In-Charge. , S&F Rolled Mild Steel Plate Girder Or Single Stanchions Built Up Of One Beam Or Channel Section With Flange Plates, Caps, Bases, Splices, Angle Brackets, Cleats And Other Connections Conforming To Fe-290Complete All As Specified And Directed. , S&F For S&F Steel Work In Tubular Trusses Including Special Shaped Washer Etc. Complete Using Erw Or Induction Butt Welded Tubes Conforming To I. S.1161 1979 Grade St.-240, Complete All As Specified And Directed. , S&F 0.63Mm Thick Galvanised, Corrugated Mild Steel Sheeting With Two Corrugations Side Lap,Fixed With Coach Screws And Washers In Roof, Walls Etc With Grade Of Zinc Coating 275, Complete All As Specified And Directed By Engr-In-Charge. , S&F 0.80Mm Thick Plain, Galvanised, Mild Steel Sheeting, In Ridges, Hips, Valley Gutters, Drip And Straight Flashings (Length And Girth As Fixed) With Grade Of Zinc Coating 275, Complete All As Specified And Directed By Engr-In-Charge. , S&F Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/ Cladding To Wall Fixed With Self Tapping Screws As Specified, Complete All As Specified And Directed. , S&F Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/ Cladding To Wall Fixed With Self Tapping Screws As Specified, Complete All As Specified And Directed. , M&L For 3Mm Thick Cover Fillet Of Standard Hard Board, 40Mm Wide And Fixing With Screws Complete All As Specified And Directed By Engr-In-Charge. , M&L For 6Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work (05 No Of Ply), Complete All As Specified And Directed By Engr-In-Charge. , M&L For 4Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Screws To Timber Frame Work In Ceiling, Complete All As Specified And Directed By Engr-In-Charge. , M&L For 75Mm Thick Plain Cement Concrete 1:3:6 Type C2 (40Mm Graded Aggregate) As In Plinth Protection Complete All As Specified And Directed. , M&L For 75Mm Thick Cement Concrete 1:4:8 Type D2 (40 Mm Graged Aggregate) As In Sub Base Or Flooring Complete All As Specified And Directed By Engr-In-Charge. , M&L For 100Mm Thick Cement Concrete Type D2, 1:4:8 (40Mm Stone Aggregate) As In Floors Or Sub Base, Complete All As Specified And Directed. , M&L For 25Mm Thick Plain Cement Concrete Type B1 1:2:4 (20Mm Graded Aggregate) As In Floors, Complete All As Specified And Directed. , M&L For 40Mm Thick Plain Cement Concrete Type B-0, 1:2:4 (12.5Mm Graded Aggregate) As In Floors, Complete All As Specified And Directed. , M&L For Glazed Ceramic Coloured Tiles In Vertical Surface 350X 250X 7Mm/ 450X 350X 7Mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , M&L For Non - Skid Ceramic Coloured Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , M&L For Non - Skid Ceramic Coloured Tiles 7 To 8 Mm Thick(Square/Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , M&L For Virified Ceramic Tiles 10 Mm Thick, Light Shade (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises, Complete All As Specified And Directed. , M&L For Rendering 10Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 As Backing Coat Complete All As Specified And Directed. , M&L For Rendering 15Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 Complete Complete All As Specified And Directed. , M&L For Screed Bed Or Bedding Layer Of Mortar 15Mm Thick For Laying Floor Finishes In Cm 1:6, Complete All As Specified And Directed. , Taking Down Cement Or Cement Lime Plaster On Brick Or Stone Walls, Etc. Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc.Complete All As Specified And Directed. , M&L For Preparation Of New Plastered Surface Of Wall And Applying Two Coat Of Cement Base Paint Over A Coat Of Alkali Resistance Priming Paint Complete All As Specified And Directed. , M&L For Preparation Of New Plastered Surface Of Wall And Applying Two Coat Of Obd Over A Coat Of Priming Plastered And Other Surfaces With Alkali Resistant Priming Paint Complete All As Specified And Directed. , S&F 4Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square N Exc 0.5 Sq. M In Each Pane Complete All As Specified And Directed. , M&L For Preparation Of Old Wooden Surfaces Of Any Description, Over 10Cm In Width Or Girth,Not Otherwise Described And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And Directed. , M&L For Preparation Of New Or Previously Untreated Wooden Surfaces Of Any Description, Not Otherwise Described Over 10Cm Width Or Girth, And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed By Engr-In-Charge. , M&L For Preparation Of Old Steel Surfaces Of Any Description, Over 10Cm In Width Or Girth,Not Otherwise Described And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And Directed. , M&L For Preparation Of New Or Previously Untreated Steel Surfaces Of Any Description, Not Otherwise Described Over 10Cm Width Or Girth, And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide, Zinc Crome Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Of Electrical Switch Board Of Any Size/Tube Light/Ceiling Rose/Holder And Refixing After And Over Wall Panelling Complete All As Specified And Directed. , M/L For Point Wiring In Casing Caping With 1.5Sq Mm Frls Pvc Insulated Unsheathed Single Core Multithreaded Copper Conductor Cable 1100 Volts Grade Incl 1.5 Sq Mm Pvc Insulated Unsheathed Copper Conductor Cable As Earth Continuity Conductor Drown Through In And Incl Casing Caping With Its Accessories Pressed Steel Terminal Box Incl 3Mm Thick Isi Marked Laminated Sheet Cover For Fixing Switches/Socket/Regulators Etc For The Following: - One Light/Fan Point Controlled By One No Piano Type Switch 5 Amps Single Pole One Way , One Socket Outlet 5/3 Pin 6 Amps Controlled By One Switch On The Same Board. , One Socket Outlet 5/3 Pin 6 Amps Controlled By One Switch On Independent Board. , All As Per Item No 1 Above But One 3 Pin Socket Out Let 15/16 Amps With Three Nos Single Core Unsheathed Pvc Insulated Cable Multistranded Copper Conductor Of Size 2.5 Sq Mm For Phase, Neutral & Earth Continuity Conductor. , S&F Switch Piano Flush Button Single Pole One Way 5/6 Amp. , S&F Switch Socket Combination 2 In 1, 3 Pin, 6 And 16 annual periodical maintenance Flush Type Universal , S&F Switch Socket Combination 2 In 1, 6A Flush Type , S&F Ceiling Rose Surface Bakelite 65Mmx50mm 10 Watt Three Terminal. , S&F Sheet Metal Enclosure Double Door For Mcb Db Single Pole And Neutral 8 Way With 200 Amps Rated Bus Bar 240 Volts Double Door (Metallic) Type Including Taking Down Old Unserviceable Mcb Db With Mcbs. , S&F Mcb Spn 32 Amps 240 Volts C Series, 10 Ka, 50 Hz. Make:- As Approved Make Of Db , S&F Mcb Sp 5 To 32 Amps 240 Volts C Series, 10 Ka, 50 Hz Including Connection In The Db And Testing/Commissioning. Make:- As Approved Make Of Db , Supply And Fixing Led Lights Fitting 1X 18W, 4 Feet, 220V,Ac Decorative Box Type With Driver, Holder Including Led Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete. , Supply And Fixing Led Luminaire 600 Mm X 600 Mm, 35/36 Watt, 220 V Ac Recessed Type With High Efficiency Pmma Diffuser Soft Glare Free Light Complete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete. , Supply And Fixing Led Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminum Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65/66 Protection Complete. , Supply And Laying Or Fixing Or Passing Through Pipexlpe Insulated, Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 Volts Grade Of Size 16 Sqmm 2 Core Complete Including Taking Out Old Unserviceable Cable All As Specified And Directed By Engineer In Charge. , Supply And Laying Or Fixing Or Passing Through Pipexlpe Insulated, Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 Volts Grade Of Size 4 Sqmm 2 Core Complete Including Taking Out Old Unserviceable Cable All As Specified And Directed By Engineer In Charge. , S&F Dwc Pipe 63/50Mm Size All As Specified And Directed By Engr-In-Charge. , Material And Labour For Earthing Complete With Galvanized Steel Earth Plate Electrode 600 X 600 X 6 Mm Thick Buried Directly In Ground( Earth Pit Not Less Than 2.25 Meter Deep Below Ground Level) With Top Edge Of Plate Not Less Than 1.5 Meter Below Normal Ground Level, Connected To Galvanised Earth Lead Wire 4.0Mm Dia By Means Of Bolts, Nuts, Check Nuts And Washers Of Galvanized Iron Or Steel, All As Shown In Electrical Plate No 3 Of Ssr Pt I Including Necessary Excavation And Earth Work Plain Cement Concrete (1:3:6) Type C-1 With 50 Mm Thick Pre Cast Reinforced Cement Concrete ( 1:2:4) Type B-1 Cover Slab Framed With 50X30x4 Mm Ms Angle (Reinforced With 6 Mm Dia Deformed Bar @ 15 Cm C/C Both Ways And Suitable Handle Of 10 Mm Dia Round Bar) Including Providing Charcoal Or Coke And Magnesium Sulphate In Alternate Layers Of 15 Cm Compacted Thickness All Around The Earth Electrode, With Funnel And 20 Mm Bore Galvanized Iron Watering Pipe (Medium Grade) Wire Mesh, Copper Lugs, Complete In All Respect., Gi Earth Wire Protected By 40 Mm Bore (Light Grade) Galvanized Iron Pipe And Other End Connected To The Earth Bar (Test Point) Made Of Ms Flat (400X32x6 Mm) Bend In ‘D Shape And Fixed To Wall By Means Of Fast Nut Or Bolt Grouted In To Wall At 1 Mtr From Plinth Height. 4Sqmm Pvc Insulated (Colour Green) Copper Conductor Single Run As Earth Continuity Conductor Along With 15 Mm Pvc Conduit Grouted In Wall Or Fixed On Wall Surface To Be Continued Up To Main Switch Board And Fix With Common Earth Dolly As Directed By Eic . Disposal Of Soil To A Distance Not Exceeding 50 Mtr And Necessary Testing On Completion Complete Including Taking Out Old Unserviceable Earthing Materials All As Specified And As Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Arunachal Pradesh View Result →
19.
Water Resources and Irrigation #11342285 AOC
Amrut-Supply, Erecting And Commissioning Of Various Pump Sets, Other Necessary Equipment For 107 Mld Sewerage Treatment Plant At Muttathara-Supply, Erecting And Commissioning Of Various Pump Sets, Other Necessary Equipments For 107 Mld Sewerage Treatment Plant At Muttathara-Sewerage Work- 1 SUPPLY, ERECTING AND COMMISSIONING OF PUMP SETS 2 OD149149/2023-2024:Supply, Erecting and Commissioning of 75 HP non clog pump set for RAS (Head – Up to 20 M) 3 OD149154/2023-2024:Supply, Erection and Commissioning of 5 HP non clog pump set for WAS (Total Head :14 M ) 4 OD149153/2023-2024:Supply, Erecting and Commissioning of 5 HP centrifugal dewatering pump set for RAS 5 OD17699/2025-2026:Supply, Erecting and Commissioning of80 HP Submersible pump set for inlet(Head : Up to 20 M) 6 OD18102/2025-2026:Supply, installation, and commissioning of minimum 100 LPH RO water purifier of standard make with 304-grade stainless steel skid and housing, comprising multi-stage purification system including pre-filter, sediment filter, activated carbon filter, RO membrane, UV disinfection unit, auto-flush system, and mineral cartridge; suitable for continuous commercial use and delivering safe, high-quality drinking water. 7 OD18758/2025-2026:Supply of 10 HP portable submersible sludge pump, 3-phase, suitable for handling slurry and sewage, maximum head up to 20 meters, solid handling capacity up to 50 mm, abrasion-resistant impeller, thermal protection, 15 m power cable, and 30 meters of heavy-duty discharge hose (100 mm dia) with quick couplings. 8 Supply and installation soft starter and motorized chain pulley 9 OD149170/2023-2024:Supply of motorized chain pulley block with 3-ton lifting capacity and 10-meter lift height, featuring electric motorized operation with electromagnetic or disc brake system, pendant control for easy operation, limit switches for safety, and overload protection, conforming to IS/ISO standards. 10 OD16970/2025-2026:Supply and installation of soft starter for MCC unit ( For 60 HP motor XS4000,115A,M200-525VACC110/ 220VAC), MNX140 3P 240V CONTACTOR and SEMI CONDUCTOR FUSE 170M3015 11 OD18097/2025-2026:Supplying, fixing, and testing 50W LED hanging type well glass light, weatherproof (IP65) 12 OD18264/2025-2026:Supply and installation of 10-meter hot-dip galvanized double-arm octagonal street light pole with 2×120W LED luminaires, including internal wiring, weatherproof junction box, connections, and earthing. Complete with foundation bolts and RCC pedestal. Includes supply, erection, and commissioning 13 Installation of CCTV camera 14 OD16801/2025-2026:Supplying & fixing HIKVISION 5 MP Varifocal IP Bullet Camera CAMERA 15 OD16892/2025-2026:Supplying, fixing and commissioning 4MP IP DOME CAMERA 16 OD16891/2025-2026:Supplying, fixing and commissioning HIKVISION 4MP IP BULLET CAMERA 40M 17 OD16890/2025-2026:Supplying, fixing and commissioning HIKVISION 32CH NVR 18 OD16889/2025-2026:Supplying, fixing and commissioning 8 PORT POE SWITCH 19 OD16888/2025-2026:Supplying & fixing 6U RACK & ACCESSORIES 20 OD16887/2025-2026:Supplying & fixing 9U RACK& ACCESSORIES 21 OD16886/2025-2026:Supplying & fixing CAMERA BOX 22 OD16885/2025-2026:Supplying & fixing CAT6 CABLE & PIPING (including excavation) 23 OD16884/2025-2026: Supplying and fixing pole with all accessories. 24 OD16920/2025-2026:Supplying and fixing 55-inch, 4K, LED, Smart TV (Samsung/LG/Sony) 25 OD16919/2025-2026:Supplying & fixing RECEIVER & TRANSMITTER UNIT 26 OD16918/2025-2026:Supplying & fixing L & T EXTENSION 5MTR 27 OD16917/2025-2026:Supplying & fixing 5 PORT GIGABYTE SWITCH 28 OD16916/2025-2026:Supplying & fixing HDMI CABLE 3MTR 29 OD16915/2025-2026:Supplying & fixing RACK & PIPE ACCESSORIES, 30 OD16914/2025-2026:INSTALLATION CHARGE FOR CAMERA& NVR 31 OD16913/2025-2026:Supplying & installation of rack 32 New Road formation: Tarring inside STP compound 33 3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m 34 4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method 35 4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. 36 5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means. 37 5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. 38 OD18679/2025-2026:Providing 40mm premixed chipping carpet over BT surface with departmental broken stones after thoroughly cleaning the base with wire brushes, brooms and applying a priming coat of hot bitumen @2.50Kg/10m2 and spreading the hot premix of 0.32m3 of 24mm, 0.22m3 of 12mm departmental metal mixed with 22.08Kg of bitumen per 10m2, rolling to dense surface, then spreading the seal coat comprising of 0.09m3 of 6mm metal mixed with 8.64kg of bitumen per 10m2 and rolling again including cost of bitumen, fuel, hire charges machineries etc. complete excluding the cost of 24mm ,12mm ,6mm metal(Total usage of bitumen 33.22 Kg per 10m2) (I.R.C 3.4.2) 39 OD18716/2025-2026:Supplying and stacking 24mm hard blue granite broken stone in standard heaps-for measurement(IRC 3.2. 1.a) 40 55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a) 41 55.3:Supplying and stacking 6mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a) 42 Infrastructure Improvement Works at STP 43 OD17712/2025-2026:Supply and installation of UV-resistant HDPE with 12mm mesh ( 2meter height) for durability. Support poles are galvanized iron pipes (2-inch dia, 6 ft height) for stability. Stainless steel clamps & UV-resistant plastic ties ensure secure fitting. Concrete footing with excavation and earthwork provides pole stability. Skilled labor ensures proper installation 44 OD17711/2025-2026:Supply and spray a non-toxic, bio-friendly herbicide or a selective herbicide, with an application rate of 5 to 10 liters per hectare, ensuring effective weed control over an area of 1 hectare. 45 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared 46 2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 47 4.2.5:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) 48 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns 49 5.22.4:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelHot rolled deformed bars 50 OD17710/2025-2026:Supply & installation of high-quality polyester sun control film with UV-blocking, heat resistance (99% UV, 60% heat rejection), 2–4 mil thickness, bubble-free installation, and 5-year warranty. 51 OD17709/2025-2026:Fire extinguishers (10L dry powder and 4.5kg CO₂) shall be installed as per IS: 2190 with inspection cards. Fire buckets with MS stands, safety posters, and caution notices in Malayalam and English shall be provided for compliance. 52 Providing roofing for DG, Inlet outdoor panels and mechanical screener 53 100.98.1009:Engaging Fitter ( grade 1). 54 15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 55 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 56 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 57 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 58 50.12.1.1:Providing & fixing PVC corrugated roofing sheets of good quality up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8 mm dia G. I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 59 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns 60 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 61 Replacement of leaking flanged pipes inside the inlet well 62 OD17790/2025-2026:Supply, conveyance, and fixing of 300mm double flanged DI K9 pipe, including scaffolding, fabrication if required (cutting, flange welding), and providing necessary fittings, nuts, bolts, rubber gaskets, and insertion rubber sheets for proper and safe installation at site. 63 OD17835/2025-2026:Dismantling existing 300 mm DI pipes carefully using crane/manual handling with all necessary safety measures, and stacking the removed materials within 50 meters as directed by the Engineer-in-Charge 64 Provision forEntry of Trucks from Rear Side of STP 65 15.7.1:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar 66 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil 67 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 68 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) 69 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 70 50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete 71 50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. 72 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 73 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 74 13.82.1:Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.One coat 75 10.26.3:Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes 76 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work 77 Security room (4m x 3m) at back entrance of STP 78 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 79 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 80 50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete 81 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete 82 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size 83 50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. 84 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). 85 5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform 86 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 87 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 88 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 89 OD17944/2025-2026:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including MS grill with suitable spacing and ISI marked M.S pressed butt hinges bright finished of required size with necessary locking arrangements. 90 OD17947/2025-2026:Electrical work including internal lighting, fan, switches, DB, concealed wiring, and one external LED light with pole/bracket for night visibility, complete with connections, fittings, and testing as per direction of Engineer-in-Charge. 91 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
Contract Date: Jun 23, 2026 Contract Value : 2.52 Crore
Local Bodies No of Bidders 1
20.
Public Administrative Department #11341496 Price Bid
Supply Of Rubber Goods , Rubber Goods , Single, Sterile, Pyrogen Free, Transperent, Leak Proof Pvc Bags. Dual Packing ( Individual & Aluminium ) Eliminating Microbial Contamination On Surface Maintaining The Contents Of The Bag. 350 Ml Capacity With Cpda As Anticoagulant. Ultra Thin Walled 16G Venipuncture Needle As Specified In Iso 1135-3. Soft & Easy To Open Outletport. Labels Must Have Mfg. Date, Expiry Date, Batch No. Manufacturer Must Give Test Reports As Per Ip / Bp / Usp Standard. , Double, Sterile, Pyrogen Free, Transperent, Leak Proof Pvc Bags. Dual Packing ( Individual & Aluminium ) Eliminating Microbial Of The Bag. 350 Ml Capacity With Cpda As Anticoagulant. Ultra Thin Walled Venipuncture Needle As Specified In Iso 1135-3.Soft Twist Off Needle Cover. Vrounded Corners. High Flexible & Kinkresistant Blood Collecting Tube Includesserial Number For Precise Easy Identification. Easy To Break Off Valve. Safe & Easy To Open Outlet Port.Rounded Corners. Highly Transparent Virgin Grade Pvc Material.High Quality Peel Resistant Label.Primarybag Having 350 Ml Capacity And One Satelliet Bag Of 300 Ml. Hould Withstandtemperature S - 70 To + 37 C. Labels Must Have Manufacturing Date, Expiry Date. Batch No. Manufacturer Must Give Test Reports As Per Ip / Bp / Usp Standards. , Triple, Sterile, Pyrogen Free, Transperent, Leak Proof Pvc Bags. Primary Bag Having350ml Capacity And Tow Satelliet Bagof 300Ml Capacity.Dual Packaging ( Individual & Aluminium ) Eliminating Microbial Contamination On Surface Maintaining The Contents Of The Bag. Ultra Thin Walled 16G Venipuncture Needle As Specified In Iso 1135-3. High Flexible & Kink Resistant Blood Collecting Tube Includes Serial Number For Precise Easy Identification.Easy To Break Off Valve.Safe & Easy To Open Outletport.Rounded Corners. Highly Transparent Virgin Grade Pvc Material / Providing Platlet 5 Days Storage Bags. High Quality Peel Resistant Label.Cpda Anticoagulant ( Usp ) . Should With Stand Temperature - 70 To + 37 C. Labels Must Have Mfg. Date, Expiry Date. Batch No.Manufacturer Must Give Test Reports As Per Ip / Bp / Usp Standards. , Blood Transfusion Sets Sterile Non-Toxic Pvc With Soft Transpaent Kink Resistanttube. Latex Tube For Convenient Extra Medication Plastic Soft Transparent Murphy Chamber With Filter Smooth Plastic Spike, Sharp Enough For Easy Piercing Easily Controllable Roller Clamp Needle - 20 / 21G. Leak Proof Double Polythelene Packing. Batch Number Mfg & Expiry Date, Sterlity Date & Method Must Be Mentioned. , Triple, Sterile, Pyrogen Free, Transperent, Leak Proof Pvc Bags. Primary Bag Having 350Ml Capacity And Tow Satelliet Bag Of 300 Ml Capacity. Sagm - 75- 80Ml. Cpd / Sag- Anticoagulant ( Usp ) . Dual Packaging ( Individual & Aluminium ) Eliminatingmicrobial Contamination On Surface Maintainingthe Contents Of The Bag. Ultra Thin Walled 16G Venipuncture Needle Asspecified In Iso 1135-3. Soft Twist Off Needle Cover High Flexible & Kink Resistantblood Collecting Tube Includes Serial Number For Precise Easy Identification.Easy To Break Off Valve. Rounded Corners. Safe & Easy To Open Outlet Port.Highlytransparent Virgin Grade Pvc Material / Providingplatlet 5 Days Storage Bags.High Qualitypeel Resistant Label.Cpda Anticoagulant ( Usp ) . Labels Must Have Manufacturing Date, Expiry Date, Batch No. Should Withstand Temperature -70To + 37 C. Manufacturermust Givetest Reports As Per Ip / Bp / Usp Standards. , Transfer Bag P.V.C Sterile Non-Pyrogenic300 Ml. Capacity With Non-Toxicp.V.C Spike.Labels Must Have The Manufacturing Date, Expiry Date, Batch Number. , Infusion Sets-Sterile Non-Toxic P. V.C. With Soft Transparent Kink Resistant Tube. Latex Tube For Convenient Extra Medication. Plastic Soft Transparent Murphy Chamber. Smooth Plastic Spike, Sharp Enough For Easypiercing.Easily Controllable Roller Clamp Needle - 20 / 21G. Leak Proof Doublepolythelene Packing.Batch Number, Mfg. & Expiry Date, Sterility Date &Method Must Be Mentioned. , Sterile Infusion Set Of Non-Toxic Pvc With Soft Transparent Kink Resistant Tube, Latextube For Convenient Extra Medication Plastic Soft Transprent Murphy Chamber Withbuilt In Air Vent.Filter At The Infusion Endof Tubing. Smooth Plastic Spike.Sharp Enough For Easy Piercing.Easily Controllable Roller Clamp Needle - 20 / 21G. Leakproof Double Polythelene Packing Batch Number, Mfg.&Method Must Be Mentioned. , Catheter No. 3 Length 16. Non-Irritant Red Rubber. Proximal Funnel End And Distal Rounded Atraumatic Tip With Side-Hole. , Catheter No. 4 Length 16. Non-Irritant Red Rubber. Proximal Funnel End And Distal Rounded Atraumatic Tip With Side-Hole. , Catheter No. 5 Length 16. Non-Irritant Red Rubber. Proximal Funnel End And Distal Rounded Atraumatic Tip With Side-Hole. , Catheter No. 6 Length 16. Non-Irritant Red Rubber. Proximal Funnel End And Distal Rounded Atraumatic Tip With Side-Hole. , Catheter No.7 Length 16. Non-Irritant Red Rubber. Proximal Funnel End And Distal Rounded Atraumatic Tip With Side-Hole. , Catheter No. 8 Length 16. Non-Irritant Red Rubber. Proximal Funnel End And Distal Rounded Atraumatic Tip With Side-Hole. , Catheter No.9 Length 16. Non-Irritant Red Rubber. Proximal Funnel End And Distal Rounded Atraumatic Tip With Side-Hole. , Catheter No. 10 Length 16. Non-Irritant Red Rubber. Proximal Funnel End And Distal Rounded Atraumatic Tip With Side-Hole. , Catheter No.11. Length 16. Non-Irritant Red Rubber. Proximal Funnel End And Distal Rounded Atraumatic Tip With Side-Hole. , Catheter No.12 Length 16. Non-Irritant Red Rubber. Proximal Funnel End And Distal Rounded Atraumatic Tip With Side-Hole. , Sterile Foley Catheter 12 F.Two Way Silicon Coated Latex Of High Quality Which Is Non-Irritant To Urethre. Ballon Near The Tip With Bulb Capacity Of 30-50 Ml. , Sterile Foley Catheter 14 F. Two Way Silicon Coated Latex Of Highquality Which Is Non-Irritant To Urethre. Ballon Near The Tip With Bulb Capacityof 30-50 Ml. , Sterile Foley Catheter 16 F. Two Way Silicon Coated Latex Of Highquality Which Is Non-Irritant To Urethre. Ballon Near The Tip With Bulb Capacity Of 30-50 Ml. , Sterile Foley Catheter 18 F. Two Way Silicon Coated Latex Of Highquality Which Is Non-Irritant To Urethre. Ballon Near The Tip With Bulb Capacity Of 30-50 Ml. , Sterile Foley Catheter 20 F. Two Way Silicon Coated Latex Of Highquality Which Is Non-Irritant To Urethre. Ballon Near The Tip With Bulb Capacityof 30-50 Ml. , Sterile Foley Catheter 22 F. Two Way Silicon Coated Latex Of Highquality Which Is Non-Irritant To Urethre. Ballon Near The Tip With Bulb Capacity Of 30-50 Ml. , Sterile Foley Catheter24 F. Two Way Silicon Coated Latex Of High Quality Which Is Non-Irritant To Urethre. Ballon Near The Tip With Bulb Capacity Of 30-50 Ml. , Sterile Foley Catheter 6 F. Two Way Silicon Coated Latex Of High Quality Which Is Non-Irritantto Urethre. Ballon Near The Tip Withbulb Capacity Of 3-5 Ml. ( With Stillate ) Size - 6 , Sterile Foley Catheter 8 F. Two Way Silicon Coated Latex Ofhigh Quality Which Is Non-Irritantto Urethre. Ballon Near The Tip With Bulb Capacity Of 3-5 Ml. ( With Stillate ) Size-8 , Sterile Foley Catheter10 F. Two Way Silicon Coated Latex Ofhigh Quality Which Is Non-Irritantto Urethre. Ballon Near The Tip Withbulb Capacity Of 3-5 Ml. ( With Stillate ) Size-10 , Infant Feeding Tube P.V.C. Non-Toxic Sterile Disposable Pyrogen Free X-Rayopaque Line & Siliconised Nos. 5 At Least Two Holes.Maximum Distance Of 1 Cms Betweenthe First Hole & The Tip Of The Catheter. Packing Should Be Straight.Size- 5- , Infant Feeding Tube P.V.C. Non-Toxic Sterile Disposable Pyrogen Free X-Rayopaque Line & Siliconised Nos. 6 At Least Two Holes.Maximum Distance Of 1 Cms Betweenthe First Hole & The Tip Of The Catheter. Packing Should Be Straight.Size-6 , Infant Feeding Tube P.V.C. Non-Toxic Sterile Disposable Pyrogen Free X-Rayopaque Line & Siliconised Nos. 7 At Least Two Holes.Maximum Distance Of 1 Cms Betweenthe First Hole & The Tip Of The Catheter. Packing Should Be Straight.Size-7 , Infant Feeding Tube P.V.C. Non-Toxic Sterile Disposable Pyrogen Free X-Rayopaque Line & Siliconised Nos. 8 At Least Two Holes.Maximum Distance Of 1 Cms Betweenthe First Hole & The Tip Of The Catheter. Packing Should Be Straight. Size- 8 , Infant Feeding Tube P.V.C. Non-Toxic Sterile Disposable Pyrogen Free X-Rayopaque Line & Siliconised Nos. 9 At Least Two Holes.Maximum Distance Of 1 Cms Between The First Hole & The Tip Of The Catheter. Packing Should Be Straight. Size - 9 , Infant Feeding Tube P.V.C. Non-Toxic Sterile Disposable Pyrogen Free X-Ray Opaque Line & Siliconised Nos. 10 At Least Two Holes. Maximum Distance Of 1 Cms Betweenthe First Hole & The Tip Of The Catheter.Packing Should Be Straight. Size- 10 , Pvc Endo-Tracheal Tube Cuffed, Oral / Nasal, Non-Kinkable, Length 25 Cm To 36 Cm Sterile, Single Use, Thermosensetive Clear Pvcbiocompatiblematerial, Graduated Along Length Murphys Eye Should Have Smooth Tip High Volume - Low Pressure Smoothtapered, Soft Seal Cuff, Black Intimationdepth Maker In The Form Of A Line Or Athin Band, Sensitive Pilot Ballon Wiht Self Sealing Valve, Radio - Opaque Line, 15Mm Universal Connector, Inflatable Pilot Balloon, Having Clear Markings Such As Cuff Resting Diameter, Size Of Tube, Central Channel ( Prevents The Pilot Balloon From Collapsing During Deflation Of The Cuff ) , And Inflation Line ( Aids In Inflating Anddeflating The Cuff ) Size -5.5 Mm I.D. , Pvc Endo-Tracheal Tube Cuffed, Oral / Nasal, Non-Kinkable, Length 25 Cmto 36 Cm Sterile, Single Use, Thermosensetive Clear Pvcbiocompatiblematerial, Graduated Along Length Murphys Eye Should Have Smooth Tip High Volume - Low Pressure Smoothtapered, Soft Seal Cuff, Black Intimationdepth Maker In The Form Of A Line Or Athin Band, Sensitive Pilot Ballon Wiht Self Sealing Valve, Radio - Opaque Line, 15Mm Universal Connector, Inflatable Pilot Balloon, Having Clear Markings Such As Cuff Resting Diameter, Size Of Tube, Central Channel ( Prevents The Pilot Balloon From Collapsing During Deflation Of The Cuff ) , And Inflation Line ( Aids In Inflating Anddeflating The Cuff ) Size- 6.0 Mm I.D. , Pvc Endo-Tracheal Tube Cuffed, Oral / Nasal, Non-Kinkable, Length 25 Cm To 36 Cm Sterile, Single Use, Thermosensetive Clear Pvcbiocompatible Material, Graduated Along Length Murphys Eye Should Have Smooth Tip High Volume - Low Pressure Smoothtapered, Soft Seal Cuff, Black Intimationdepth Maker In The Form Of A Line Or Athin Band, Sensitive Pilot Ballon Wiht Self Sealing Valve, Radio - Opaque Line, 15Mm Universal Connector, Inflatable Pilot Balloon, Having Clear Markings Such As Cuff Resting Diameter, Size Of Tube, Central Channel ( Prevents The Pilot Balloon From Collapsing During Deflation Of The Cuff ) , And Inflation Line ( Aids In Inflating Anddeflating The Cuff ) Size -6.5 Mm I.D. , Pvc Endo-Tracheal Tube Cuffed, Oral / Nasal, Non-Kinkable, Length 25 Cm To 36 Cm Sterile, Single Use, Thermosensetive Clear Pvcbiocompatiblematerial, Graduated Alonglength Murphys Eye Should Have Smooth Tip High Volume - Low Pressure Smoothtapered, Soft Seal Cuff, Black Intimationdepth Maker In The Form Of A Line Or Athin Band, Sensitivepilot Ballon Wiht Self Sealing Valve, Radio - Opaque Line, 15Mm Universal Connector, Inflatable Pilot Balloon, Having Clear Markings Such As Cuff Resting Diameter, Size Of Tube, Central Channel ( Prevents The Pilot Balloon From Collapsing During Deflation Of The Cuff ) , And Inflationline ( Aids In Inflating Anddeflating The Cuff ) Size -7.0 Mm I.D. , Pvc Endo-Tracheal Tube Cuffed, Oral / Nasal, Non-Kinkable, Length 25 Cmto 36 Cm Sterile, Single Use, Thermosensative Clear Pvcbiocompatible Material, Graduated Along Length Murphys Eye Should Have Smooth Tip High Volume - Low Pressure Smoothtapered, Soft Seal Cuff, Black Intimationdepth Maker In The Form Of A Line Or Athin Band, Sensitivepilot Ballon Wiht Self Sealing Valve, Radio - Opaque Line, 15Mm Universal Connector, Inflatable Pilot Balloon, Havingclear Markings Such As Cuff Resting Diameter, Size Of Tube, Central Channel ( Prevents The Pilot Balloon From Collapsing During Deflation Of The Cuff ) , And Inflationline ( Aids In Inflating Anddeflating The Cuff ) Size- 7.5 Mm I.D. , Pvc Endo-Tracheal Tube Cuffed, Oral / Nasal, Non-Kinkable, Length 25 Cmto 36 Cm Sterile, Single Use, Thermosensative Clear Pvcbiocompatible Material, Graduated Alonglength Murphys Eye Should Have Smooth Tip High Volume - Low Pressure Smoothtapered, Soft Seal Cuff, Black Intimationdepth Maker In The Form Of A Line Or Athin Band, Sensitivepilot Ballon Wiht Self Sealing Valve, Radio - Opaque Line, 15Mm Universal Connector, Inflatable Pilot Balloon, Having Clear Markings Such As Cuff Resting Diameter, Size Of Tube, Central Channel ( Prevents The Pilot Balloon From Collapsing During Deflation Of The Cuff ) , And Inflation Line ( Aids In Inflating Anddeflating The Cuff ) Size- 8.0 Mm I.D. , Pvc Endo-Tracheal Tube Cuffed, Oral / Nasal, Non-Kinkable, Length 25 Cmto 36 Cm Sterile, Single Use, Thermosensative Clear Pvc Biocompatible Material, Graduated Along Length Murphys Eye Should Have Smooth Tip High Volume - Low Pressure Smoothtapered, Soft Seal Cuff, Black Intimationdepth Makerin The Form Of A Line Or Athin Band, Sensitive Pilot Ballon Wiht Self Sealing Valve, Radio - Opaque Line, 15Mm Universal Connector, Inflatable Pilot Balloon, Having Clear Markings Such As Cuff Resting Diameter, Size Of Tube, Central Channel ( Prevents The Pilot Balloon From Collapsing During Deflation Of The Cuff ) , And Inflation Line ( Aids In Inflating Anddeflating The Cuff ) Size- 8.5 Mm I.D. , Pvc Endo-Tracheal Tube Cuffed, Oral / Nasal, Non-Kinkable, Length 25 Cm To 36 Cm Sterile, Single Use, Thermosensative Clear Pvcbiocompatible Material, Graduated Alonglength Murphys Eye Should Have Smooth Tip High Volume - Low Pressure Smoothtapered, Soft Seal Cuff, Black Intimationdepth Maker In The Form Of A Line Or Athin Band, Sensitivepilot Ballon Wiht Self Sealing Valve, Radio - Opaque Line, 15Mm Universal Connector, Inflatable Pilot Balloon, Having Clear Markings Such As Cuff Resting Diameter, Size Of Tube, Central Channel ( Prevents The Pilot Balloon From Collapsing During Deflation Of The Cuff ) , And Inflation Line ( Aids In Inflating Anddeflating The Cuff ) Size- 9.0 Mm I.D. , Pvc Endo-Tracheal Tube Plain Oral / Nasal, Non-Kinkable, Pvc Biocompatible Material, With Smooth Tip Single Use, Graduated Along The Length From 3 Cm Onwords At 1 Cm Interval Upto Atleast 10 Cm Black Intimation Depthmaker In Theform Of A Line Or A Thin Band, Murphys Eye Radio-Opaque Line, 15Mm Universal Connector Size- 2.0 Mm I.D. , Endo-Tracheal Tube Plain Oral / Nasal, Non-Kinkable, Length 13 Cm To 30 Cm Sterile, Thermosensitive Clear Pvc Biocompatible Material, With Smooth Tip Single Use, Graduated Along The Length From 3 Cm Onwords At 1 Cm Interval Upto Atleast 10 Cm Black Intimation Depthmaker In The Form Of A Line Or A Thin Band, Murphys Eye Radio-Opaque Line, 15Mm Universal Connector Size -2.5 Mm I.D , Endo-Tracheal Tube Plain Oral / Nasal, Non-Kinkable, Length 13 Cm To 30 Cm Sterile, Thermosensitive Clear Pvc Biocompatible Material, With Smooth Tip Single Use, Graduated Along Thelength From 3 Cm Onwords At 1 Cm Interval Upto Atleast 10 Cm Black Intimation Depthmaker In The Form Of A Line Or A Thin Band, Murphys Eye Radio-Opaque Line, 15Mm Universal Connector Size-3.0 Mm I.D , Endo-Tracheal Tube Plain Oral / Nasal, Non-Kinkable, Length 13 Cm To 30 Cm Sterile, Thermosensitive Clear Pvc Biocompatible Material, With Smooth Tip Single Use, Graduated Along Thelength From 3 Cm Onwords At 1 Cm Interval Upto Atleast 10 Cm Black Intimation Depthmaker In The Form Of A Line Or A Thin Band, Murphys Eye Radio-Opaque Line, 15Mm Universal Connector Size-3.5 Mm I.D , Endo-Tracheal Tube Plain Oral / Nasal, Non-Kinkable, Length 13 Cm To 30 Cm Sterile, Thermosensitive Clear Pvc Biocompatible Material, With Smooth Tip Single Use, Graduated Along The Length From 3 Cm Onwords At 1 Cm Interval Upto Atleast 10 Cm Black Intimation Depthmaker In The Form Of A Line Or A Thin Band, Murphys Eyeradio-Opaque Line, 15Mm Universal Connector Size-4.0 Mm I.D , Endo-Tracheal Tube Plain Oral / Nasal, Non-Kinkable, Length 14 Cm To 30 Cm Sterile, Thermosensitive Clear Pvc Biocompatible Materialwith Smooth Tip Single Use, Graduated Along The , Length From 3 Cm Onwords At 1 Cm Interval Upto Atleast 10 Cm Black Intimation Depthmaker In The Form Of A Line Or A Thin Band, Murphys Eye The Form Of A Line Or A Thin Band, Murphys Eyethe Form Of A Line Or A Thin Band, Murphys Eye Radio-Opaque Line, 15Mm Universal Connector Size-4.5 Mm I.D , Endo-Tracheal Tube Plain Oral / Nasal, Non-Kinkable, Length 14 Cm To 30 Cm Sterile, Thermosensitive Clear Pvc Biocompatible Materialthermosensitive Clear Pvc Biocompatible Material, With Smooth Tip Single Use, Graduated Along The Length From 3 Cm Onwords At 1 Cm Interval Upto Atleast 10 Cm Black Intimation Depthmaker In The Form Of A Line Or A Thin Band, Murphys Eye Radio-Opaque Line, 15Mm Universal Connector Size-5.0 Mm I.D , Endo-Tracheal Tube Plain Oral / Nasal, Non-Kinkable, Length 14 Cm To 30 Cm Sterile, Thermosensitive Clear Pvc Biocompatible Material, With Smooth Tip Single Use, Graduated Along The Length From 3 Cm Onwords At 1 Cm Interval Upto Atleast 10 Cm Black Intimation Depthmaker Inthe Form Of A Line Or A Thin Band, Murphys Eye Radio-Opaque Line, 15Mm Universal Connector Size-5.5 Mm I.D , Endo-Tracheal Tube Plain Oral / Nasal, Non-Kinkable, Length 14 Cm To 30 Cm Sterile, Thermosensitive Clear Pvc Biocompatible Material, With Smooth Tip Single Use, Graduated Along The Length From 3 Cm Onwords At 1 Cm Interval Upto Atleast 10 Cm Black Intimation Depthmaker Inthe Form Of A Line Or A Thin Band, Murphys Eye Radio-Opaque Line, 15Mm Universal Connector Size-6.0 Mm I.D , Endo-Tracheal Tube Plain Oral / Nasal, Non-Kinkable, Length 14 Cm To 30 Cm Sterile, Thermosensitive Clear Pvc Biocompatible Material, With Smooth Tip Single Use, Graduated Along The Length From 3 Cm Onwords At 1 Cm Interval Upto Atleast 10 Cm Black Intimation Depthmaker Inthe Form Of A Line Or A Thin Band, Murphys Eye Radio-Opaque Line, 15Mm Universal Connector Size-6.5 Mm I.D , Microdrip Sets, Sterile Non-Toxic Pvc With Transperent Murphy Drip With Dripper Needle Leak Proof In Double Polyethelene Packing ( Batch No., Mfg Date, Sterility Date & Method Must Be Mentioned ) , Volumetric Microdrip Sterile Non-Toxic P.V.C. With Paediatric Burette Settransparentmurphy Drip With Dripperneedle Leakproof And A Polyethylene Chamber ( Capacity 100Ml With 1Ml Marking ) Packed In Double Polyethylene Packing ( Batch No., Mfg Date, Sterility Date &Method Must Be Mentioned ) , Disposable Non- Sterile Approns Made With Plastic 50 Micron Thickness With Easy To Wear Belt Attachment, Size : 28× 52 , Rubber Sheeting, Water Proof, Resistantto Ageing, Disinfectant, Detergent, Sterilizable ( Mackintosh ) Super Quality Non Creasing Width 90-95 Cms , Nasogastric Tube P.V.C Non-Toxic Sterile Disposable Pyrogen Free With X-Rayopaque Line With Cap Size - 6 - , Nasogastric Tube P.V.C Non-Toxic Steriledisposable Pyrogen Free With X-Rayopaque Line With Cap Size - 8 , Nasogastric Tube P.V.C Non-Toxic Sterile Disposable Pyrogen Free With X-Rayopaque Line With Cap Size- 10 , Nasogastric Tube P.V.C Non-Toxic Sterile Disposable Pyrogen Free With X-Rayopaque Line With Cap Size- 12 , Nasogastric Tube P.V.C Non-Toxic Sterile Disposable Pyrogen Free With X-Ray Opaque Line. With Graduation Mark With Capsize- 14 - , Nasogastric Tube P.V.C Non-Toxic Steriledisposable Pyrogen Free With X-Ray Opaque Line. With Graduation Mark With Cap Size- 16 , Nasogastric Tube P.V.C Non-Toxic Steriledisposable Pyrogen Free With X-Ray Opaque Line. With Graduation Mark With Cap Size-18 , Nasogastric Tube P.V.C Non-Toxic Sterile Disposable Pyrogen Free With X-Ray Opaque Line. With Graduation Mark With Cap Size- , Superior Quality Scalp Vein Setsize-21 ( Gauge ) Non Toxic Pvc Sterile, Pyrogen Free, Sharp & Rust Free Needles Tips For Easy Cannulation Properly Decured Junction Of Needles & Tubing At Butterfly Level Other End Of Tubing Must Have Proper Fitted Stopper & Must Be Properly Fixable I.V. Tubings. Blister Pack. , Superior Quality Scalp Vein Setsize-22 ( Gauge ) Non Toxic Pvc Sterile, Pyrogen Free, Sharp & Rust Free Needles Tips For Easy Cannulation Properly Decured Junction Of Needles & Tubing At Butterfly Level Other End Of Tubing Must Have Proper Fitted Stopper & Must Be Properly Fixable I.V. Tubings. Blister Pack. , Superior Quality Scalp Vein Setsize-23 ( Gauge ) Non Toxic Pvc Sterile, Pyrogen Free, Sharp & Rust Free Needles Tips For Easy Cannulation Properly Decured Junction Of Needles & Tubing At Butterfly Level Other End Of Tubing Must Have Proper Fitted Stopper & Must Be Properly Fixable I.V. Tubings. Blister Pack. , Superior Quality Scalp Vein Set Specially For Paeditric / Neonatial Use.Size-24 ( Gauge ) Non Toxic Pvc Sterile, Pyrogen Free, Sharp & Rust Free Needles Tips For Easy Cannulation Properlydecured Junctionof Needles & Tubing At Butterfly Level Other End Of Tubing Must Have Proper Fitted Stopper & Must Be Properly Fixable I.V. Tubings.Blister Pack. , Superior Quality Scalp Vein Set Specially For Paeditric / Neonatial Use.Size-25 ( Gauge ) Non Toxic Pvc Sterile, Pyrogen Free, Sharp & Rust Free Needles Tips For Easy Cannulation Properly Decured Junctionof Needles & Tubing At Butterfly Level Other End Of Tubing Must Have Proper Fitted Stopper & Must Be Properly Fixable I.V. Tubings.Blister Pack. , Tubing Pressure I.R. Thick Wall With5-6Mm I.D For Suction Apparatus.Non-Collapsible , Adjustable Velcro Strap For Paediatric & Adult Patients Size : 33 Cm. × 2.5 Cm , Urine Bags, 2000Ml Capacity, Sterile Trtansperant Made Up Of Pvc Superiorquality Which Distends Well With Flowof Urine, Leak Proof With Non-Returnablevalve, Drainage Outlet, Supply Kink Resistant Tubing Of 85 To 95 Cm Length. Pyrogen Free, Non-Toxic, Sterile With Graduated Marking. , Chest Drainage Catheter Pvc, Non Toxicpyrogen Free, X-Ray Opaque Line, Sterilised, Disposable Size - 12 - , Chest Drainage Catheter Pvc, Non Toxic Pyrogen Free, X-Ray Opaque Line, Sterilised, Disposable Size -16 , Chest Drainage Catheter Pvc, Non Toxicpyrogen Free, X-Ray Opaque Line, Sterilised, Disposable Size- 20 , Chest Drainage Catheter Pvc, Non Toxicpyrogen Free, X-Ray Opaque Line, Sterilised, Disposable Size - 24 , Chest Drainage Catheter Pvc, Non Toxicpyrogen Free, X-Ray Opaque Line, Sterilised, Disposable Size - 28 , Chest Drainage Catheter Pvc, Non Toxic Pyrogen Free, X-Ray Opaque Line, Sterilised, Disposable Size -32 , Chest Drainage Catheter Pvc, Non Toxic Pyrogen Free, X-Ray Opaque Line, Sterilised, Disposable Size -36 , Water Sealed Drainage System For Interostat Drainage, Sterile, Pyrogen Free, Disposable , Nj Tubes. Radi-Opaque.Spiral Gudewire With Adapter For Injecting The Contrast / Lubricants Flexiblepolyurethane Olive With Two Openings At Distal Tube End Numerical Scale Marking At Every 10 Cm, 12 Ch120 Cm. Length, 15 Ch 100 Cm. , Sterile Personal Protective Kit.It Should Contain The Following Sterile Items In A Tamper Proof Sealed Packet.:1 ) Pe Plastic Adult Full Lengthgown: Quantity : One Piece. Material : Pe Size : Atleast 115 Cm × 132 Cm. Thickness : 110-120 Microns, Sleeves : Round With Velcro Fastner Full Front With Back Open. Facility To Tie At Waist Level. 2 ) Face Mask : Quantity : One Piece.25 Gsm Non-Woven Fabric With Nose Fit. 3 ) Surgeons Cap : Quantity : One Piece.25 Gsm Non-Woven Fabric. Partial Elastic Band For Proper Fit. 4 ) Shoe Cover : Quantity : One Pair, Material : Pe Plastic, More Than 110-120 Micron.Elastic At Ankle Level For Proper Fit5 ) Zero No. Eye Care Spectacles With Side Cover - 1Pc , Quadripal Sterile Pyrogen Free Fransparent Leak Proof Pvc Bag Having 350Ml Capacitywith Cpd As Anticoagulate & Connected Withthe Satellite Bags Of 300Ml Capacity & Onewhich Would Contain 75 To 80Ml Of Sagm Solution As An Additive Solution.The Bag Should Withstand Temperature From 40 C To 37C.The Bag Should Have 16G Leak Proof Ports & Flat Needle Holder Kink Free Tubing With Hot Making For Identification. All Components Used Must Be Comply With Iso / Ce Standards. , Platelet Apheresis Kit For Hymenitica Mbc - 3 ( Reference 995E Extended Storage Platelets / Plasma Affersis Sets ) With Acd Solution 500 Ml Insterile Pyrogen Free Transperent Leakproof Pvc Bags. The Kit Set Sterile. Non Toxic, Pvc Soft Tubing Chamber Or Transparent Plastic With Leak Proof Of ( Batchno, Mfg. Dt. & License, Sterility Dt &Methods Etc. Must Be Mentioned ) The Kit Must Be Comply With Iso / Ce Standard. , Pvc, Non Kinkable, Disposable, Cuffed Flexometallic Tubes. Made Of Thermo-Sensitive Clear Pvc With A Smooth Tip And Murphy Eye With Spiral Reinforcement To Minimize, Crushing Or Kinking Low Pressure-High Volume Tapered Cuff Made From Velvet Soft Pvc Material, For Minimal Risk Of Trauma It Has An Inflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And Inflation Line. Size -3.5 Mm I.D. , Pvc, Non Kinkable, Disposable, Cuffed Flexometallic Tubes. Made Of Thermo-Sensitive Clear Pvc With A Smooth Tip And Murphy Eye With Spiral Reinforcement To Minimize Crushing Or Kinking Low Pressure-High Volume Tapered Cuff Made From Velvet Soft Pvc Material, For Minimal Risk Of Trauma It Has An Inflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And Inflation Line. Size-4.0 Mm I.D. , Pvc, Non Kinkable, Disposable, Cuffed Flexometallic Tubes. Made Of Thermo-Sensitive Clear Pvc With A Smooth Tip And Murphy Eye With Spiral Reinforcement To Minimizecrushing Or Kinking Low Pressure-High Volume Tapered Cuff Made From Velvet Soft Pvc Material, For Minimal Risk Of Trauma It Has An Inflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And Inflation Line. Size - 4.5 Mm I.D. , Pvc, Non Kinkable, Disposable, Cuffed Flexometallic Tubes. Made Of Thermo-Sensitive Clear Pvc With A Smooth Tip And Murphy Eye With Spiral Reinforcement To Minimizecrushing Or Kinking Low Pressure-High Volume Tapered Cuff Made From Velvet Soft Pvc Material, For Minimal Risk Oftrauma It Has An Inflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And Inflation Line. Size -5.0 Mm I.D. , Pvc, Non Kinkable, Disposable, Cuffed Flexometallic Tubes.Made Of Thermo-Sensitive Clear Pvc With A Smooth Tip And Murphy Eye With Spiral Reinforcement To Minimize Crushing Or Kinking Low Pressure-High Volume Tapered Cuff Made From Velvet Soft Pvc Material, For Minimal Risk Oftrauma It Has An Inflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And Inflation Line. Size - 5.5 Mm I.D. , Pvc, Non Kinkable, Disposable, Cuffed Flexometallic Tubes. Made Of Thermo-Sensitive Clear Pvc With A Smooth Tip And Murphy Eye With Spiral Reinforcement To Minimizecrushing Or Kinking Low Pressure-High Volume Tapered Cuff Made From Velvet Soft Pvc Material, For Minimal Risk Oftrauma It Has An Inflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And Inflation Line. Size-6.0 Mm I.D. , Pvc, Non Kinkable, Disposable, Cuffed Flexometallic Tubes.Made Of Thermo-Sensitive Clear Pvc With A Smooth Tip And Murphy Eye With Spiral Reinforcement To Minimize Crushing Or Kinking Low Pressure-High Volume Tapered Cuff Made From Velvet Soft Pvc Material, For Minimal Risk Oftrauma It Has An Inflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And Inflation Line. Size- 6.5 Mm I.D. , Pvc, Non Kinkable, Disposable, Cuffed Flexometallic Tubes. Made Of Thermo-Sensitive Clear Pvc With A Smooth Tip Andmurphy Eye With Spiral Reinforcement To Minimize Crushing Or Kinking Low Pressure-High Volume Tapered Cuff Made From Velvet Soft Pvc Material, For Minimal Risk Oftrauma It Has An Inflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And Inflation Line. Size -7.0 Mm I.D. , Pvc, Non Kinkable, Disposable, Cuffed Flexometallic Tubes. Made Of Thermo-Sensitive Clear Pvc With A Smooth Tip And Murphy Eye With Spiral Reinforcement To Minimize Crushing Or Kinking Low Pressure-High Volume Tapered Cuff Made From Velvet Soft Pvc Material, For Minimal Risk Of Trauma It Has An Inflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And Inflation Line. Size- 7.5 Mm I.D. , Pvc, Non Kinkable, Disposable, Cuffed Flexometallic Tubes. Made Of Thermo-Sensitive Clear Pvc With A Smooth Tip And Murphy Eye With Spiral Reinforcement To Minimize Crushing Or Kinking Low Pressure-High Volume Tapered Cuff Made From Velvet Soft Pvc Material, For Minimal Risk Oftrauma It Has An Inflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And Inflation Line. Size - 8.0 Mm I.D. , Pvc, Non Kinkable, Disposable, Cuffed Flexometallic Tubes. Made Of Thermo-Sensitive Clear Pvc With A Smooth Tip And Murphy Eye With Spiral Reinforcement To Minimizecrushing Or Kinking Low Pressure-High Volume Tapered Cuff Made From Velvet Soft Pvc Material, For Minimal Risk Of Trauma It Has An Inflatable Pilot Balloon To Help Indicatecuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And Inflation Line. Size- 8.5 Mm I.D. , Uncuffed North Pole Preform Tube:Softaltraumatic Tip. Should Be Made Up Of Clear, Thermo -Sensitive, Pvc Material To Allow Observation Of The Condensed Exheld Moisture The Design Should ) Ensure Free Access To The Maxilla & Mandealbeduring Surgery.It Should Maintain The Facial Symmetry While Providing Stable Fixation Of Tube.It Shouldhave Clear Markings On The At The Levgel Of The Vocal Chords & External Nares To Assist In Correct Placement. A Black Intubation Depth Marker Locatedat The Level Of Vocal Cords Assist In Accurate Placement Ofthe Trachealtube Within The Tracheal 1Cm Graduations On The Side Of The Tube To Identify The Distance From The Tip Murphy Eye On The Side Opposite To The Bevel There Should Be Radio-Opaque Line On The Tube To Confirm Position Of The Tube.Should Confirm To The International Stds &Safety Features Size- Tubes3.5 , Uncuffed North Pole Preform Tube:Softaltraumatic Tip. Should Be Made Up Of Clear, Thermo -Sensitive, Pvc Material To Allow Observation Of The Condensed Exheld Moisture The Design Should ) Ensure Free Access To The Maxilla & Mandealbe During Surgery.It Should Maintain The Facial Symmetry While Providing Stable Fixation Of Tube.It Shouldhave Clear Markings On The At The Level Of The Vocal Chords & External Nares To Assist In Correct Placement. A Black Intubation Depth Marker Locatedat The Levgel Of Vocal Cords Assist In Accurate Placement Ofthe Trachealtube Within The Tracheal 1Cm Graduations On The Side Of The Tube To Identify The Distance From The Tip Murphy Eye On The Side Opposite To The Bevel There Should Be Radio-Opaque Line On The Tube To Confirm Position Of The Tube.Should Confirm To The International Stds &Safety Features Size -Tubes4.0 , Uncuffed North Pole Preform Tube:Softaltraumatic Tip. Should Be Made Up Of Clear, Thermo -Sensitive, Pvc Material To Allow Observation Of The Condensed Exheld Moisture The Design Should ) Ensure Free Access To The Maxilla & Mandealbe During Surgery.It Should Maintain The Facial Symmetry Whileproviding Stable Fixation Of Tube.It Shouldhave Clear Markings On The At The Levgel Of The Vocal Chords & External Nares To Assist In Correct Placement. A Black Intubation Depth Marker Locatedat The Level Of Vocal Cords Assist In Accurate Placement Ofthe Trachealtube Within The Tracheal 1Cm Graduations On The Side Of The Tube To Identify The Distance From The Tip Murphy Eye On The Side Opposite To The Bevel There Should Be Radio-Opaque Line On The Tube To Confirm Position Of The Tube.Should Confirm To The International Stds &Safety Features Size- Tubes4.5 , Uncuffed North Pole Preform Tube:Softaltraumatic Tip. Should Be Made Up Of Clear, Thermo -Sensitive, Pvc Material To Allow Observation Of The Condensed Exheld Moisture The Design Should ) Ensure Free Access To The Maxilla & Mandealbe During Surgery.It Should Maintain The Facial Symmetry While Providing Stable Fixation Of Tube.It Shouldhave Clear Markings On The At The Level Of The Vocal Chords & External Nares To Assist In Correct Placement. A Black Intubation Depth Marker Locatedat The Levgel Of Vocal Cords Assist In Accurate Placement Ofthe Trachealtube Within The The Distance From The Tip Murphy Eye On The Side Opposite To The Bevel There Should Be Radio-Opaque Line On The Tube To Confirm Position Of The Tube.Should Confirm To Theinternational Stds &Safety Featuressize - Tubes 5.0 , Uncuffed North Pole Preform Tube:Softaltraumatic Tip. Should Be Made Up Of Clear, Thermo -Sensitive, Pvc Material To Allow Observation Of The Condensed Exheld Moisture The Design Should ) Ensure Free Access To The Maxilla & Mandealbeduring Surgery.It Should Maintain The Facial Symmetry While Providing Stable Fixation Of Tube.It Shouldhave Clear Markings On The At The Level Of The Vocal Chords & External Nares To Assist In Correct Placement. A Black Intubation Depth Marker Locatedat The Levgel Of Vocal Cords Assist In Accurate Placement Ofthe Trachealtube Within The Tracheal 1Cm Graduations On The Side Of The Tube To Identify The Distance From The Tip Murphy Eye On The Side Opposite To The Bevel There Should Be Radio-Opaque Line On The Tube To Confirm Position Of The Tube.Should Confirm To The International Stds &Safety Features Size - Tubes 5.5 , Cuffed North Pole Preform Tube: Soft Atraumatic Tip Should Be Made Up Of Clear, Thermo - Sensitive, High Quality Ivory Pvc Material To Allow Observation Of The Condensed Exhaled Moisture The Design Should Insure Free Accessto The Maxilla & Mandeable During Surgery.It Should Maintain Thefacial Synmetry While Providing Stable Fixation Of Tube.It Shouldhave Clear Markings On The Tube At The Level Of The Vocal Cords & External Nerves To Assist In Correct Placement. A Black Intubation Depth Marker Located 3Cm Proximal To The Cuffe.This Assist In Accurate Placement Of The Tracheal Tube Within The Trachea 1Cm Graduation On Side Of The Tubeto Identify The Distance From The Bevel.Cuffeshould Be Profile & Made From Soft Pvcmaterial, Minimising The Risk Of Trauma, Cuffe Should Be High Volume, Low Pressure Type To Minimise Lateral Pressure On Tracheal Wall. The Resting Diameter Of The Cuffe Should Be Large Ensuring Effective Seal In Trachea, Even When Small Tracheal Cuffes Are Used. Thereshould Be Radio- Opaque Line On The Tube To Confirm Position Of The Tube. The Preformed Bend Should Have Markings Forcutting Tube Shorter Postoperatively For Easier Suctioningshould Have An Inflatable Pilot Balloon To Help Indicate Cuffpressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And A Blue Inflation Line. The Tube Confirm To The International Standards & Safety Features .Size-Tubes 5.5 , Cuffed North Pole Preform Tube: Soft Atraumatic Tip Should Be Made Up Of Clear, Thermo - Sensitive, High Quality Ivory Pvc Material To Allow Observation Of The Condensed Exhaled Moisture The Design Should Insure Free Accessto The Maxilla& Mandeable During Surgery.It Should Maintain Thefacial Synmetry While Providing Stable Fixation Of Tube.It Should Have Clear Markings On The Tube At The Level Of The Vocal Cords & External Nerves To Assist In Correct Placement. A Black Intubation Depth Marker Located 3Cm Proximal To The Cuffe.This Assist In Accurate Placement Of The Tracheal Tube Within The Trachea 1Cm Graduation On Side Of The Tube To Identify The Distance From The Bevel.Cuffeshould Be Profile & Made From Soft Pvcmaterial, Minimising The Risk Of Trauma, Cuffe Should Be High Volume, Low Pressure Typeto Minimise Lateral Pressure On Tracheal Wall. The Resting Diameter Of The Cuffe Should Be Large Ensuring Effective Seal In Trachea, Even When Small Tracheal Cuffes Are Used. There Should Be Radio- Opaque Line On The Tube To Confirm Position Of The Tube. The Preformed Bend Should Have Markings Forcutting Tube Shorter Postoperatively For Easier Suctioning Should Have An Inflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Restingdiameter, With A Spring-Loaded One-Way Valve, And A Blue Inflation Line. The Tube Confirm To The International Standards & Safety Features Size -Tubes 6.0 , Cuffed North Pole Preform Tube: Soft Atraumatic Tip Should Be Made Up Of Clear, Thermo - Sensitive, High Quality Ivory Pvc Material To Allow Observation Of The Condensed Exhaled Moisture The Design Should Insure Free Accessto The Maxilla & Mandeable During Surgery.It Should Maintain Thefacial Synmetry While Providing Stable Fixation Of Tube.It Should Have Clear Markings On The Tube At The Level Of The Vocal Cords & External Nerves To Assist In Correct Placement. A Black Intubation Depth Marker Located 3Cm Proximal To The Cuffe.This Assist In Accurate Placement Of The Tracheal Tube Within The Trachea 1Cm Graduation On Side Of The Tube To Identify The Distance From The Bevel.Cuffeshould Be Profile & Made From Soft Pvcmaterial, Minimising The Risk Of Trauma, Cuffe Should Be High Volume, Low Pressure Type To Minimise Lateral Pressure On Tracheal Wall. The Restingdiameter Of The Cuffe Should Be Large Ensuring Effective Seal In Trachea, Even When Small Tracheal Cuffes Are Used. There Should Be Radio- Opaque Line On The Tube To Confirm Position Of The Tube. The Preformed Bend Should Have Markings Forcutting Tube Shorter Postoperatively For Easier Suctioning Should Have An Inflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Restingdiameter, With A Spring-Loaded One-Way Valve, And A Blue Inflation Line. The Tube Confirm To The Internationalstandards & Safety Features Size - Tubes 6.5 , Cuffed North Pole Preform Tube: Soft Atraumatic Tip Should Be Made Up Of Clear, Thermo - Sensitive, High Quality Ivory Pvc Material To Allow Observation Of The Condensed Exhaled Moisture The Design Should Insure Free Accessto The Maxilla& Mandeable During Surgery.It Should Maintain Thefacial Synmetry While Providing Stable Fixation Of Tube.It Should Have Clear Markings On The Tube At The Level Of The Vocal Cords & External Nerves To Assist In Correct Placement. A Black Intubation Depth Marker Located 3Cm Proximal To The Cuffe.This Assist In Accurate Placement Of The Tracheal Tube Within The Trachea 1Cm Graduation On Side Of The Tubeto Identify The Distance From The Bevel.Cuffeshould Be Profile & Made From Soft Pvcmaterial, Minimising The Risk Of Trauma, Cuffe Should Be High Volume, Low Pressure Typeto Minimise Lateral Pressure On Tracheal Wall. The Resting Diameter Of The Cuffe Should Be Large Ensuring Effective Seal In Trachea, Even When Small Tracheal Cuffes Are Used. Thereshould Be Radio- Opaque Line On The Tube To Confirm Position Of The Tube. The Preformed Bend Should Have Markings Forcutting Tube Shorter Postoperatively For Easier Suctioning Should Have An Inflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And A Blue Inflation Line. The Tube Confirm To The International Standards & Safety Featuressize -Tubes 7.0 , Cuffed North Pole Preform Tube: Soft Atraumatic Tip Should Be Made Up Of Clear, Thermo - Sensitive, High Quality Ivory Pvc Material To Allow Observation Of The Condensed Exhaled Moisture The Design Should Insure Free Accessto The Maxilla & Mandeable During Surgery.It Should Maintain Thefacial Synmetry While Providing Stable Fixation Of Tube.It Should Have Clear Markings On The Tube At The Level Of The Vocal Cords & External Nerves To Assist In Correct Placement. A Black Intubation Depth Marker Located 3Cm Proximal To The Cuffe.This Assist In Accurate Placement Of The Tracheal Tube Within The Trachea 1Cm Graduation On Side Of The Tube To Identify The Distance From The Bevel.Cuffeshould Be Profile & Made From Soft Pvcmaterial, Minimising The Risk Of Trauma, Cuffe Should Be High Volume, Low Pressure Type To Minimise Lateral Pressure On Tracheal Wall. The Resting Diameter Of The Cuffe Should Be Large Ensuring Effective Seal In Trachea, Even When Small Tracheal Cuffes Are Used. There Should Be Radio- Opaque Line On The Tube To Confirm Position Of The Tube. The Preformed Bend Should Have Markings Forcutting Tube Shorter Postoperatively For Easier Suctioning Should Have An Inflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Restingdiameter, With A Spring-Loaded One-Way Valve, And A Blue Inflation Line. The Tube Confirm To The International Standards & Safety Features Size - Tubes 7.5 , Cuffed North Pole Preform Tube: Soft Atraumatic Tip Should Be Made Up Of Clear, Thermo - Sensitive, High Quality Ivory Pvc Material To Allow Observation Of The Condensed Exhaled Moisture The Design Should Insure Free Accessto The Maxilla & Mandeable During Surgery.It Should Maintain Thefacial Synmetry While Providing Stable Fixation Of Tube.It Should Have Clear Markings On The Tube At The Level Of The Vocal Cords & External Nerves To Assist In Correct Placement. A Black Intubation Depth Marker Located 3Cm Proximal To The Cuffe.This Assist In Accurate Placement Of The Trachealtube Within The Trachea 1Cm Graduation On Side Of The Tube To Identify The Distance From The Bevel.Cuffeshould Be Profile & Made From Soft Pvcmaterial, Minimising The Risk Of Trauma, Cuffe Should Be High Volume, Low Pressure Type To Minimise Lateral Pressure On Tracheal Wall. The Resting Diameter Of The Cuffe Should Be Large Ensuring Effective Seal In Trachea, Even When Small Tracheal Cuffes Are Used. Thereshould Be Radio- Opaque Line On The Tube To Confirm Position Of The Tube. The Preformed Bend Should Have Markings Forcutting Tube Shorter Postoperatively For Easier Suctioningshould Have An Inflatable Pilot Balloon To Help Indicate Cuffpressure, Having Clear Markings Such As Cuff Restingdiameter, With A Spring-Loaded One-Way Valve, And A Blue Inflation Line. The Tube Confirm To The Internationalstandards & Safety Features Size -Tubes 8.0 , Cuffed North Pole Preform Tube: Soft Atraumatic Tip Should Be Made Up Of Clear, Thermo - Sensitive, High Quality Ivory Pvc Material To Allow Observation Of The Condensed Exhaled Moisture The Design Should Insure Free Accessto The Maxilla & Mandeable During Surgery.It Should Maintain Thefacial Synmetry While Providing Stable Fixation Of Tube.It Should Have Clear Markings On The Tube At The Level Of The Vocal Cords & External Nerves To Assist In Correct Placement.A Black Intubation Depth Marker Located 3Cm Proximal To The Cuffe.This Assist In Accurate Placement Of The Tracheal Tube Within The Trachea 1Cm Graduation On Side Of The Tube To Identify The Distance From The Bevel.Cuffeshould Be Profile & Made From Soft Pvcmaterial, Minimising The Riskof Trauma, Cuffe Should Be High Volume, Low Pressure Type To Minimise Lateral Pressure On Tracheal Wall. The Resting Diameter Of The Cuffe Should Be Large Ensuring Effective Seal In Trachea, Even When Small Tracheal Cuffes Are Used. There Should Be Radio- Opaque Line On The Tube To Confirm Position Of The Tube. The Preformed Bend Should Have Markings Forcutting Tube Shorter Postoperatively For Easier Suctioning Should Have An Inflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And A Blueinflation Line. The Tube Confirm To The Internationalstandards & Safety Features Size - Tubes 8.5 , Cuffed North Pole Preform Tube: Soft Atraumatic Tip Should Be Made Up Of Clear, Thermo - Sensitive, High Quality Ivory Pvc Material To Allow Observation Of The Condensed Exhaled Moisture The Design Should Insure Free Accessto The Maxilla & Mandeable During Surgery.It Should Maintain Thefacial Synmetry While Providing Stable Fixation Of Tube.It Shouldhave Clear Markings On The Tube At The Level Of The Vocal Cords & External Nerves To Assist In Correct Placement. A Black Intubation Depth Marker Located 3Cm Proximal To Thecuffe.This Assist In Accurate Placement Of The Tracheal Tube Within The Trachea 1Cm Graduation On Side Of The Tube To Identify The Distance From The Bevel.Cuffeshould Be Profile & Made From Soft Pvcmaterial, Minimising The Risk Of Trauma, Cuffe Should Be High Volume, Low Pressure Type To Minimise Lateral Pressure On Tracheal Wall. The Resting Diameter Of The Cuffe Should Be Large Ensuring Effective Seal In Trachea, Even When Small Tracheal Cuffes Are Used. There Should Be Radio- Opaque Line On The Tube To Confirm Position Of The Tube. The Preformed Bend Should Have Markings For Cutting Tube Shorter Postoperatively For Easier Suctioning Should Have An Inflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And A Blueinflation Line. The Tube Confirm To The International Standards & Safety Features Size - Tubes 9.0 , Uncuffed South Polar Preform Tubes :Soft Atraumatic Tip Uniform Internal Diameter, South Limb Covered So As To Avoid Any Pressure On A Chin & Lower Tip.The Design Should Ensure Free Access To Maxilla, Upperlip, Pallet & Nose While Maintainingsymmetry Should Be Made Up Of Clear, Thermo - Sensitive, Pvc Material To Allow Observation Of The Condensed Exhold Moisture 1Cm Graduation On The Side Of The Tube Toidentify The Distance From The Tip. A Black Intubation Depth Marker Located At The Level Of The Vocal Cort Assist In Accurate Placement Of The Tracheal Tube Within The Trachea.Inflation Line Take Off Point Should Lie Outside Themouth Bevel Of The Tube Shouldface Laterally.Murphyeye Should Be Smooth & Should Be On The Side Opposite Tothe Bevel. There Should Be Radio- Opaque Line On The Tube To Confirm Position Of Thetube & Should Confirm To The Internationalstandards & Safety Features. Size-Tubes 3.5 Size- Tubes 4.5 , Uncuffed South Polar Preform Tubes :Soft Atraumatic Tip Uniform Internal Diameter, South Limb Covered So As To Avoid Any Pressure On A Chin & Lower Tip.The Design Should Ensure Free Access To Maxilla, Upperlip, Pallet & Nose While Maintainingsymmetry Should Be Made Up Of Clear, Thermo - Sensitive, Pvc Material To Allow Observation Of The Condensed Exhold Moisture 1Cm Graduation On The Side Of The Tube Toidentify The Distance From The Tip. A Black Intubation Depth Marker Located At The Level Of The Vocal Cort Assist In Accurate Placement Of The Tracheal Tube Within The Trachea. Inflation Line Take Off Point Should Lie Outside The Mouth Bevel Of The Tube Shouldface Laterally.Murphy Eye Should Be Smooth & Should Be On The Side Opposite To The Bevel. There Should Be Radio- Opaque Line On The Tube To Confirm Position Of Thetube & Should Confirm To The Internationalstandards & Safety Features. , Uncuffed South Polar Preform Tubes :Soft Atraumatic Tip Uniform Internal Diameter, South Limb Covered So As To Avoid Any Pressure On A Chin & Lower Tip.The Design Should Ensure Free Access To Maxilla, Upperlip, Pallet & Nose While Maintainingsymmetry Should Be Made Up Of Clear, Thermo - Sensitive, Pvc Material To Allow Observation Of The Condensed Exhold Moisture 1Cm Graduation On The Side Of The Tube Toidentify The Distance From The Tip. A Black Intubation Depth Marker Located At The Level Of The Vocal Cort Assist In Accurate Placement Of The Tracheal Tube Within The Trachea.Inflation Line Take Off Point Should Lie Outside The Mouth Bevel Of The Tube Shouldface Laterally.Murphy Eye Should Be Smooth & Should Be On The Side Opposite To The Bevel. There Should Be Radio- Opaque Line On The Tube To Confirm Position Of Thetube & Should Confirm To The Internationalstandards & Safety Features. Size- Tubes 5.5 , Uncuffed South Polar Preform Tubes :Soft Atraumatic Tip Uniform Internal Diameter, South Limb Covered So As Toavoid Any Pressure On A Chin & Lower Tip.The Design Should Ensure Free Access To Maxilla, Upperlip, Pallet & Nose While Maintainingsymmetry Should Be Made Up Of Clear, Thermo - Sensitive, Pvc Material To Allow Observation Of The Condensed Exhold Moisture 1Cm Graduation On The Side Of The Tube Toidentify The Distance From The Tip. A Black Intubation Depth Markerlocated At The Level Of The Vocal Cort Assist In Accurate Placement Of The Tracheal Tube Within The Trachea.Inflation Line Take Off Point Should Lie Outside The Mouth Bevel Of The Tube Shouldface Laterally.Murphyc Eye Should Be Smooth & Should Be On The Side Opposite To The Bevel. There Should Be Radio- Opaque Line On The Tube To Confirm Position Of Thetube & Should Confirm To The Internationalstandards & Safety Features. Size- Tubes 8.0 , Cuffed South Polar Preform Tubes :Softatraumatic Tip Uniform Internal Diameter, South Limb Covered So As To Avoid Anypressure On A Chin & Lower Tip. Thedesign Should Ensure Free Access To Maxilla, Upperlip, Pallet & Nose While Maintainingsymmetry Should Be Made Up Of Clear, Thermo -Sensitive, Pvc Material To Allowobservation Of The Condensed Exhald Moisture1cmgraduation On The Side Of The Tubeto Identify Thedistance From The Tipa Black Intubation Depth Markerlocated At The Level Of The Vocal Cords Assist Inaccurateplacement Of The Tracheal Tubewithin The Trachea. The Cuff Should Beprofile & Made Form Soft Pvc Material, Mnimising The Risk Of Trauma. Cuffshould Be High Volume, Low Pressure Typeto Minimise Lateral Pressure On Tracheal Wall.The Resting Diameter Of The Cuff Shouldbe Large Ensuring Effective Seal In Trachea. Inflation Line Take Off Point Should Lie Outside The Mouth Bevel Of The Tube Should Face Laterally. Murphy Eye Should Be Smooth & Shouldbe On The Side Apposite To The Bevel.There Should Be Radio Opague Line On The To Of Confirm Position Of The Tube Should Confirm To The International Standard And Safetyfeatures. Clear Size Identification On The Southlimbinflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With Aspring-Loaded One-Way Valve, And A Blue Inflation Line.Size- 5.5 , Cuffed South Polar Preform Tubes : Softatraumatic Tip Uniform Internal Diameter, South Limb Covered So As To Avoid Anypressure On A Chin & Lower Tip. Thedesign Should Ensure Free Access To Maxilla, Upper Lip, Pallet & Nose While Maintainingsymmetry Should Be Made Up Of Clear, Thermo -Sensitive, Pvc Material To Allowobservation Of The Condensed Exhald Moisture1cm Graduation On The Side Of The Tubeto Identify The Distance From The Tipa Black Intubation Depth Marker Located At The Level Of The Vocal Cords Assist Inaccurate Placement Of The Tracheal Tubewithin The Trachea. The Cuff Should Beprofile & Made Form Soft Pvc Material, Mnimising The Risk Of Trauma. Cuffshould Be High Volume, Low Pressure Typeto Minimise Lateral Pressure On Tracheal Wall.The Resting Diameter Of The Cuff Shouldbe Large Ensuring Effective Seal In Trachea. Inflation Line Takeoff Point Should Lie Outside The Mouth Bevel Of The Tubeshould Face Laterally. Murphy Eye Should Be Smooth & Should Be On The Side Apposite To The Bevel.There Should Be Radio Opague Line On The To Of Confirm Position Of The Tubeshould Confirm To The International Standard And Safety Features. Clear Size Identification On The Southlimbinflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And A Blue Inflation Line. Size- 6.5 , Cuffed South Polar Preform Tubes : Softatraumatic Tip Uniform Internal Diameter, South Limb Covered So As To Avoid Anypressure On A Chin & Lower Tip. Thedesign Should Ensure Free Access To Maxilla, Upper Lip, Pallet & Nose While Maintainingsymmetry Should Be Made Up Of Clear, Thermo -Sensitive, Pvc Material To Allowobservation Of The Condensed Exhald Moisture1cm Graduation On The Side Of The Tubeto Identify The Distance From The Tipa Black Intubation Depth Marker Located At The Level Of The Vocal Cords Assist Inaccurate Placement Of The Tracheal Tubewithin The Trachea. The Cuff Should Beprofile & Made Form Soft Pvc Material, Mnimising The Risk Of Trauma. Cuffshould Be High Volume, Low Pressure Typeto Minimise Lateral Pressure On Tracheal Wall.The Resting Diameter Of The Cuff Shouldbe Large Ensuring Effective Seal In Trachea. Inflation Line Take Off Point Should Lie Outside The Mouth Bevel Of The Tubeshould Face Laterally. Murphy Eye Should Be Smooth & Should Be On The Side Apposite To The Bevel.There Should Beradio Opague Line On The To Of Confirm Position Of The Tube Should Confirm To The International Standard And Safetyfeatures. Clear Size Identification On The Southlimbinflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And A Blue Inflation Line. Size- 7.5 , Cuffed South Polar Preform Tubes : Softatraumatic Tip Uniform Internal Diameter, South Limb Covered So As To Avoid Anypressure On A Chin & Lower Tip. Thedesign Should Ensure Free Access To Maxilla, Upperlip, Pallet & Nose While Maintainingsymmetry Should Be Made Up Of Clear, Thermo -Sensitive, Pvc Material To Allowobservation Of The Condensed Exhald Moisture1cm Graduation On The Side Of The Tubeto Identify The Distance From The Tipa Black Intubation Depth Marker Located At The Level Of The Vocal Cords Assist Inaccurate Placement Of The Tracheal Tubewithin The Trachea. Thecuff Should Beprofile & Made Form Soft Pvc Material, Mnimising The Risk Of Trauma. Cuffshould Be High Volume, Low Pressure Typeto Minimise Lateral Pressure On Tracheal Wall.The Resting Diameter Of The Cuff Shouldbe Large Ensuring Effective Seal In Trachea. Inflation Line Take Off Point Should Lie Outside The Mouth Bevel Of The Tube Should Face Laterally. Murphy Eye Should Be Smooth & Should Be On The Side Apposite To The Bevel.There Should Be Radio Opague Line On The To Of Confirm Position Of The Tube Should Confirm To The International Standard And Safetyfeatures. Clear Size Identification On The South Limbinflatable Pilot Balloon To Help Indicate Cuff Pressure, Having Clear Markings Such As Cuff Resting Diameter, With A Spring-Loaded One-Way Valve, And A Blue Inflation Line. Size - 8.0 , Quadruple, Sterile, Pyrogen Free, Transparent, Leak Proof Pvc Bag Prinary Bag Having350 Ml Capacity And 3Satellite Bagtwo Satellite Bag Of 300Ml Capacity One Of Which Will Have 75-80Ml Sagm Solution And One Of50ml Capacity.Dual Packaging ( Individual And Alluminum ) Limiting Contamination On Surface Marinating Contentof The Bag. Ultra Thin Walled 16G Venepuncture Needle As Specified In Iso 1135-3. High Flaxible Hang The Bags Ivertedly In The Extractor Without Giving Much Pressure In The Instrument. Needle Protector Should Be With Inner Soft Pvc Material To Ensure Hermetic Closure Of The Hub And Outer One Is Made Of Polypropulene To Ensure Rigidity Of The Cap And Maintain The Integrity Of The Needle. High Quality Peel Resistant Labels Must Have Mfg. Date, Exp. Date, Batch No. Manufacturer Must Give The Test Reports As Per Ip / Bp / Usp Standards. And Kink Resistantblood Collecting Tubes Includes Serial No. For Precise Easy Identification. Easy To Break Of Valve. Safe And Easy Toopen Outlet Port. Rounded Corners. Highly Transparentvirgin Grade Pvc Material Providing Platelets 5Days Storage Bags. Cpda Anticoagulant ( Usp ) Should Wihtsatand Temperature-80 Degree Celcius To + 37 Degree Celcius. The Donor Tube Length Wiht 123+ / -2Cm And Tubes Of Satelliteshould Have Length Of 30+ / -2Cms, Upto Y-Connection ( With Minimum Of 4 Hot Markings ) And From The Y-Connection To The Satellite Bag The Length Required Should Be 30+ / -2Cms ( With Minimumof 4 Hot Markings ) . The Hot Markings / Numbering Shall Be Identical In In Donor As Well As Satellite Bag Tubes. It Should Be In A Position Route Through The Automatic Component Extractor. There Shouldbe 2 Handholes On The Top Of Seal Of Themother Bag Buffy Bag To Hang In The Component Extractor.The Length Between 2 Holes Should Be 2.1Cm+ / -0.1Cm. There Should Be A Slit In The Bottom Of All Bags To , Catheter Mount , Disposable Face Mask 3Ply With Lace , Cord Clamp , Sterile Connecting Device Wafers 1. Wafers Should Be Packed In A Cassettefor Easy Installation In Sterile Connecting Device. 2. Each Cassette Should Have Minimum 70 Wafers.3. It Should Be Compatible For Welding Of Blood Bags Tubes Or Apheresis Set Modification. 4. The Product Code Should Be Capitalsc* W017. 5. Wafers Shold Have Length Of 34.3Mm, Width 12.71Mm & Thickness Of 0.28Mm. 6. Internal Resistance ( Silver Coated ) In Therange Of 8O To 12O 7. Wafer Input Voltage Should Be 12V Dc. 8. Time To Reach 320 Dc Should Be 8Seconds To 12 Seconds.9. Insulation Resistance At 500 V Should Be 5 M? , Disposable N-95* Respirators Available In Sizes: Small, Medium, Large Cup / Pouch Shaped Strong Band To Secure To Face *Filtration Efficiency Of 95% Or More For Non Oil Based Praticles 0.3 Micron Or Above , Disposable Surgical #N-95* Respirators Available In Sizes: Small, Medium, Large Cup / Pouch Shaped Strong Band To Secure To Face #Fluid Resistance At 160 Mm Hg *Filtration Efficiency Of 95% Or More For Non Oilbased Praticles 0.3 Micron Or Above , Neonatal Cpap Delivery Set: Consisting Of: 1. Disposable Neonatal Heated Wire Breathing Circuit With Inspiratory Limb Heating, Autofeed Chamber, Compatible With Mr 850, Mr 730 Heater Base And Compatible With All Brands Of Nasal Cpap Masks 2 ) Nasal Cpap Masks Of Assorted Sizes ( Xs, S, M, Xl ) Withappropriate Sizes Bonnets. 3. Bubble Cpap Generator. , Tracheostomy Tube, Plain Single Use, Sterile Size No. 3.5 1. Should Be Made Of Thermosensitivesiliconised Pvc. 2. Should Have A Soft, Semi Directionalflexible Flange. 3. Should Have A Radio Opaque Blue Line On The Tube. 4. Should Have A Rounded Distal Edge. 5. Should Be Uncuffed. 6. Should Have An 15Mm Connector Integrated On The Tracheostomy Tube. 7. Should Have Ce Approval. , Tracheostomy Tube, Plain Single Use, Sterile Size No. 4.0 1. Should Be Made Of Thermosensitivesiliconised Pvc. 2. Should Have A Soft, Semi Directionalflexible Flange. 3. Should Have A Radio Opaque Blue Line On The Tube. 4. Should Have A Rounded Distal Edge. 5. Should Be Uncuffed. 6. Should Have An 15Mm Connector Integrated On The Tracheostomy Tube. 7. Should Have Ce Approval. , Tracheostomy Tube, Plain Single Use, Sterile Size No. 4.5 1. Should Be Made Of Thermosensitivesiliconised Pvc. 2. Should Have A Soft, Semi Directionalflexible Flange. 3. Should Have A Radio Opaque Blue Line On The Tube. 4. Should Have A Rounded Distal Edge. 5. Should Be Uncuffed. 6. Should Have An 15Mm Connector Integrated On The Tracheostomy Tube. 7. Should Have Ce Approval. , Tracheostomy Tube, Plain Single Use, Sterile Size No. 5.0 1. Should Be Made Of Thermosensitivesiliconised Pvc. 2. Should Have A Soft, Semi Directionalflexible Flange. 3. Should Have A Radio Opaque Blue Line On The Tube. 4. Should Have A Rounded Distal Edge. 5. Should Be Uncuffed. 6. Should Have An 15Mm Connector Integrated On The Tracheostomy Tube. 7. Should Have Ce Approval. , Tracheostomy Tube, Cuffed Single Use, Sterile Size No. 6 1. Should Be Made Of Thermosensitive Pvc. 2. Should Have A High Volume - Low Pressure, Velvet Soft Cuff. 3 Should Have Clear Marking On The Pilot Balloon That Provide Informationon I.D. Of The Tube And Cuff Restingdiameter. 4. Should Have A Clear Flexible Flange. 5. Should Have A Tapered Distal Tip.6. Should Have A Hollow Obturator With Rounded Tip For Insertion Over A Guide Wire. 7. Should Have An 15Mm Connector Integrated On The Tracheostomy Tube. 8. Should Have An Option Of Inserting An Inner Cannula.9. Should Have Ce Approval. , Tracheostomy Tube, Cuffed Single Use, Sterile Size No. 7 1. Should Be Made Of Thermosensitive Pvc. 2. Should Have A High Volume - Low Pressure, Velvet Soft Cuff. 3 Should Have Clear Marking On The Pilot Balloon That Provide Informationon I.D. Of The Tube And Cuff Restingdiameter. 4. Should Have A Clear Flexible Flange. 5. Should Have A Tapered Distal Tip.6. Should Have A Hollow Obturator With Rounded Tip For Insertion Over A Guide Wire. 7. Should Have An 15Mm Connector Integrated On The Tracheostomy Tube. 8. Should Have An Option Of Inserting An Inner Cannula.9. Should Have Ce Approval. , Tracheostomy Tube Single Use, Cuffed, Sterile Size No. 7.5 1. Should Be Made Of Thermosensitive Pvc. 2. Should Have A High Volume - Low Pressure, Velvet Soft Cuff. 3 Should Have Clear Marking On The Pilot Balloon That Provide Informationon I.D. Of The Tube And Cuff Restingdiameter. 4. Should Have A Clear Flexible Flange. 5. Should Have A Tapered Distal Tip.6. Should Have A Hollow Obturator With Rounded Tip For Insertion Over A Guide Wire. 7. Should Have An 15Mm Connector Integrated On The Tracheostomy Tube. 8. Should Have An Option Of Inserting An Inner Cannula.9. Should Have Ce Approval. , Tracheostomy Tube Single Use, Cuffed, Sterile Size No. 8 1. Should Be Made Of Thermosensitive Pvc. 2. Should Have A High Volume - Low Pressure, Velvet Soft Cuff. 3 Should Have Clear Marking On The Pilot Balloon That Provide Informationon I.D. Of The Tube And Cuff Restingdiameter. 4. Should Have A Clear Flexible Flange. 5. Should Have A Tapered Distal Tip.6. Should Have A Hollow Obturator With Rounded Tip For Insertion Over A Guide Wire. 7. Should Have An 15Mm Connector Integrated On The Tracheostomy Tube. 8. Should Have An Option Of Inserting An Inner Cannula.9. Should Have Ce Approval. , Tracheostomy Tube, Cuffed Single Use, Sterilesize No. 8.5 1. Should Be Made Of Thermosensitive Pvc. 2. Should Have A High Volume - Low Pressure, Velvet Soft Cuff. 3 Should Have Clear Marking On The Pilot Balloon That Provide Informationon I.D. Of The Tube And Cuff Restingdiameter. 4. Should Have A Clear Flexible Flange. 5. Should Have A Tapered Distal Tip.6. Should Have A Hollow Obturator With Rounded Tip For Insertion Over A Guide Wire. 7. Should Have An 15Mm Connector Integrated On The Tracheostomy Tube. 8. Should Have An Option Of Inserting An Inner Cannula.9. Should Have Ce Approval. , Airway 2 , Airway 3 , Airway 4 , Nebulisation Chambers , Suction Catheter Disposable No. 6 , Suction Catheter Disposable No. 8 , Suction Catheter Disposable No. 9 , Suction Catheter Disposable No. 10 , Suction Catheter Disposable No. 12 , Suction Catheter Disposable No. 14 , Nasal Prongs / Nasal Oxygen Cannula, Single Use Paediatric Use , Nasal Prongs / Nasal Oxygen Cannula, Single Use Neonatal Size No. 5 , Oxygen Mask ( Single Use, Disposable ) Paediatric Size , Oxygen Mask ( Venturi ) Adult Oxygen Mask Clear, Non-Toxic Pvc Material With 6 Color Coded Diluters For Adjusting Fio2, Adjustable Nose Clip. Anti-Crush Tubing. , Oxygen Mask With Reservoir Bag Adult High Concentrationdisposable Oxygen Maskmade Of Non-Toxic, Clear Pvc Material With Reservoir Bag ( 1000 Cc ) Non-Rebreathing Maskwith Anti-Crush 7 Ft. Tubingwith Adjustable Nose Clip. , Bacterio-Viral Filter With Humidifier ( Disposable ) Connection 22 M / 15F - 22F / 15 M Filter Withhydrophilic 0.3 Micron, Efficiency>99%, Sterilizedby Ionizing Radiation , Hollow Fibre Dialysermembrane : Synthetic : Poly Sulfone / Poly Ether Sulfone / Polyamide Surface Area : 0.9 Sq. Mt. , Hollow Fibre Dialysermembrane : Synthetic : Poly Sulfone / Poly Ether Sulfone / Polyamide Surface Area : 1.3 Sq. Mt. , Blood Line Tubing Type Universal Arterialvenous Line Pump Segmentvenous Chamber. , Silicone Band 2.5*0.7Mm ( 240 ) Silicone , Silicone Tyre 2.5*7Mm ( 279 ) Silicone , Silicone Intubation Set ( Bicanalicular ) 23G Needle-11Cm*0.6Mm Diam Inner Diam-0.30Mm Outer Diam-0.64Mm , Monocanalicular Stent Length-40Mmdiam-0.64Mm Silicone Rod , Frontalis Sling Needle-6.3Cm*92 Omicron Diamlength Of Rod -40Cmlength Of Sleeve-7Mmsilicone , Orbital Floor Implants 6*6 Inches Single Sheet Silicone , Air Injection Tubing Silicone , I / A Cannula And Tubing 23G Curved Shaft With 0.3Mm Top Aspirating Port 21G Irrigation Silicone Tube Stainless Steel Hub And Shaft , Silicon Oil Injection Cannula Set20g And 23G Silicone , Theraputic Plasma Exchange Kits For Haemonetics Aphaeresis Machine ( Reference981e-00 Tpe Set { 125 Ml Lathem } ) With 2 Acdsolution Each 500Ml In Sterile Pyrogen Freetransparent Leakproof Bags. The Kit Set Sterile .Non Toxic, Pvc Soft Tubing Chamber Or Transparent Plastic With Leak Proof Of ( Batch No, Mfg Date & License, Sterlitydate And Methods Etc Must Be Mentioned ) . The Kitsmust Be Comply With Iso / Ce Standard. , Theraputic Plasma Exchange Kits For Haemonetics Aphaeresis Machine ( Reference981e-00 Tpe Set { 225 Ml Lathem } ) With 2 Acd Solution Each 500Ml In Sterile Pyrogen Freetransparent Leakproof Bags. The Kit Set Sterile .Non Toxic, Pvc Soft Tubing Chamber Ortransparent Plastic With Leak Proof Of ( Batch No, Mfg Date & License, Sterlitydate And Methods Etc Must Be Mentioned ) . The Kitsmust Be Comply With Iso / Ce Standard. , Pvc Endotracheal Tube Cuffed, Oral / Nasal 5.0 Mm Id Made Of Thermosensitive Clear Pvc With Smoothtip, Murphy Eye And Radioopaque Blue Line, Clear Size Identification On South Limb, Intubation Length ( Tip To Incisor Teethidentification Mark ) Confirms To Cut-To-Length Norms, Low Presure High Volume Cuff Made From Pvc Material, Intubation Depth Marker Present And Clear Depth Markings, A Blue 15Mm Connector, Single Use Available In Sterile Package, Latex Free, Ce Certified And Fda Approved , Oxygen Mask ( Single Use ) Adult Size Light Weight Design, Soft Edge For Patient Comfort, Nose Clip For Nose Bridge Adjustment Andbetter Fit, Pull Through Adjustable Elastic Head Band, 2 Meter Tubing , Nasal Prongs / Nasal Oxygen Cannula For Adults U Shaped Moulding With Limbs Which Is Insertedinto Nostril, 2 Meter Tubing , Disposable Suction Linear Bag Primary ( Green ) With Inbuild Solidify Agent 2 Liter Capacity. , Disposable Suction Linear Bag Final ( Red ) With Flow Stopper & Inbuild Solidify Agent 2 Liter Capacity. , Bmw Black Bag Large. Size: 30X34 Thickness 90 Microns, Quality- Double Sealing, Chlorine Free, Leak Proof And Compliant With Govt. Of Maharashtra Notification Of Plastics, Printed Label: Printing As Per Cpcb Guidelines, Name Of Hospital, Chlorine Free Bags, Area And Date Of Generation, Not For Biomedical Waste, Mfg Date, Expiry Date / Use Before Date, Batch Number. , Bmw Red Baglarge. Size - 30X34” ( Weight Bearing 16-20 Kgs ) . Material:Compostable Plastic And Complies With Most Recent Standard For Compostable Plastic 17088 And Version / Year As Applicable, Chlorine Free, Should Not Be Made Of Reused Plastic, Autoclavable; Should Withstand Autoclaving At 121 ° C For 60 Minutes , Bmw Yellow Bag Large Size - 30X34” ( Weight Bearing 16-20 Kgs ) . ( Should Be Capable Of Bearing Weight < 10Kgs ) . Material: Compostable Plastic And Complies With The Most Recent Standard For Compostable Plastic 17088 And Version / Year As Applicable, Chlorine Free, Should Not Be Made Of Reused Plastic , Bmw Black Bag Medium Size - 29X32”, Thickness 90 Microns, Quality- Double Sealing, Chlorine Free, Leak Proof And Compliant With Govt. Of Maharashtra Notification Of Plastics, Printed Label: Printing As Per Cpcb Guidelines, Name Of Hospital, Chlorine Free Bags, Area And Date Of Generation, Not For Biomedical Waste, Mfg Date, Expiry Date / Use Before Date, Batch Number. , Bmw Red Bagmedium. Size - 29X32” ( Weight Bearing 10-15 Kgs ) . Material:Compostable Plastic And Complies With Most Recent Standard For Compostable Plastic 17088 And Version / Year As Applicable, Chlorine Free, Should Not Be Made Of Reused Plastic, Autoclavable; Should Withstand Autoclaving At 121 ° C For 60 Minutes , Arterial Line Transducers , Bmw Yellow Bag Medium Size - 29X32” ( Weight Bearing 10-15 Kgs ) . ( Should Be Capable Of Bearing Weight < 10Kgs ) . Material: Compostable Plastic And Complies With The Most Recent Standard For Compostable Plastic 17088 And Version / Year As Applicable, Chlorine Free, Should Not Be Made Of Reused Plastic , Bmw Black Bagsmallsize - 25X29”, Thickness 90 Microns, Quality- Double Sealing, Chlorine Free, Leak Proof And Compliant With Govt. Of Maharashtra Notification Of Plastics, Printed Label: Printing As Per Cpcb Guidelines, Name Of Hospital, Chlorine Free Bags, Area And Date Of Generation, Not For Biomedical Waste, Mfg Date, Expiry Date / Use Before Date, Batch Number. , Bmw Red Bag Small.Size - 25X29” ( Should Be Capable Of Bearing Weight < 10Kgs ) . Material:Compostable Plastic And Complies With Most Recent Standard For Compostable Plastic 17088 And Version / Year As Applicable, Chlorine Free, Should Not Be Made Of Reused Plastic, Autoclavable; Should Withstand Autoclaving At 121 ° C For 60 Minutes , Bmw Yellow Bag Smallsize - 25X29” ( Should Be Capable Of Bearing Weight < 10Kgs ) . Material: Compostable Plastic And Complies With The Most Recent Standard For Compostable Plastic 17088 And Version / Year As Applicable, Chlorine Free, Should Not Be Made Of Reused Plastic , Disposable Ventilator Tubing Set Adult Made Of Plastic, Tube Length At Least 2 Meters, Comprising Of Adult Size Corrugated Tubings , Y Piece , Angle Connector, Water Trap Chamber , Adult Cuff Bp Apparatus, Clinically Accurate Measurements, 4 Different Button For Easy Operation, Who Indicator, Wide Cuff For Both Regular And Large Arms, Oscillometric Method For Better Accuracy, Quiet And Low Noise Inflation, Low Battery Indication , Lma Protector Size 3 Second Generation Airway With Dual Gastricaccess, Soft Silicone Elongatedcuff For Effective First And Second Seal Anatomically Shaped Eliptical Airway, Should Have Fixation Tab And Integral Bite Block And Cuff Pressure Indicator , Lma Protector Size 4 Second Generation Airway With Dual Gastricaccess, Soft Silicone Elongatedcuff For Effective First And Second Seal Anatomically Shaped Eliptical Airway, Should Have Fixation Tab And Integral Bite Block And Cuff Pressure Indicator , Paediatric Short Breathing Circuits- 1.8Meter Single Use Pediatric Expandable Anaesthesia Circuit With Bifurcated Wye With 1 L Breathing Bag , Hfnc Cannula Infant Size ( 00, 01 ) Pressure Of Gas -Air / Oxygen @0.3-0.4 Mpa; Blender Alarm Noise >50Db With Humidifier Temperature Monitoring With Heater Wire , Dvt Stockings , Disposable Breathing Circuits , Disposable Ventilator Tubing Set Pediatrics Made Of Plastic, Tube Length At Least 2 Meters, Comprising Of Adult Size Corrugated Tubings , Y Piece , Angle Connector, Water Trap Chamber , Nebulisation Kit Paediatric- Complete With Nebulisation Chamber, T Piece And Tubing. *This Item Is Being Added As Only The Chamber Is Available In The Schedule ) Material Pvc , Nebulizer Volume 6-12Cc With 1 Meter Extension Tube , Sharp Waste Disposal Cans Size: 20 L Printed With Biohazard Symbol Colour: Blue Material : Plastic, Properties : Leak Proof , Puncture Proof And Tamper Proof ( It Should Not Be Possible To Remove Items That Have Been Dropped In The Can ) A Marked Line Along The Circumference Of The Sharp Can To Indicate The Level That Should Be Considered As Full , Bp Apparatus Stand Model Mercurial Type, Adjustable In Height With Adult, Pediatric And Infantbp Cuffs, Measurement Range 0-290Mmhg , Supraglottic Airway 4 Second Generation Airway With Gastricaccess, Soft Elongated Cuff For Effective First And Second Seal Anatomically Shaped Eliptical Airway, Should Have Fixation Tab And Integral Bite Block , Disposable Laryngeal Mask Airway 2Nd Generation, With Gastric Suction Portwith Soft Gel, Non-Inflatable Cuff Size 4.0 , Disposable Laryngeal Mask Airway 2Nd Generation, With Gastric Suction Portwith Soft Gel, Non-Inflatable Cuff Size 3.0 , Airvo Kit ( All Sizes ) ( Optiflow Nasal Interface Having Soft Flexible Prongs, Heated Breathing Tubes Having Dual Spiral Heater Wires And Unique Integrated Temperature Sensors With Adjustable Temperature And Flow Settings , Material- Polyvinyl Chloride , 3 Way Stop Cock With Extension Tube 100Cm Sterile, Disposable, Pvc Material, Kink Resistant , Nebulisation Kit- Complete With Nebulisation Chamber, T Piece And Tubing. *This Item Is Being Added As Only The Chamber Is Available In The Schedule ) , Adult Breathing Circuits , Cautery Pad - 5L X 3W, Made Of A Plastic Base Material That Is Covered With A Metal Film That Serves As The Actual Electrode Surface 9 Foot Wire, Insulated Conductive Silicon Rubber, Adult Type , Heat And Moisture Exchange And Breathing System Filters Rigid Filter Housing With 2 Standard Connection Port 22M And 15F, Material- Hygroscopic Filter Coated Wityh Calcium Chloride And Lithium Chloride Polypropylene , Supraglottic Airway 3Second Generation Airway With Gastricaccess, Soft Elongated Cuff For Effective First And Second Seal Anatomically Shaped Eliptical Airway, Should Have Fixation Tab And Integral Bite Block , Absorbent Sheet 60X90cm , 8Mm Thickness, Large Size , High Absorbancy, Leak Proof Backing , Incentive Spirometer 3 Ball Lungs Exerciser, Adult Size , Short Sheath 5F Vascular Introducer Sheath , Stoma Bag 2 Piece, Flexible Pe Coupling System. Good Anti-Leakage Function. Cureguard Adhesive Skin Barrier , Lma Protector Size 5 Second Generation Airway With Dual Gastricaccess, Soft Silicone Elongatedcuff For Effective First And Second Seal Anatomically Shaped Eliptical Airway, Should Have Fixation Tab And Integral Bite Block And Cuff Pressure Indicator , Short Sheath 8F Vascular Introducer Sheath , Abdominal Binder Large Size, 90-100 Cm, Material: Polyester+Rubber+Nylon With Velcro Closure , Infant Cuff Bp Apparatus : Display Type- Manual, Material - Nylon, Band Size-6 To 11 Cm , Adult Long Breathing Circuits , Abdominal Binder Medium Size, Material: Polyester+Rubber+Nylon With Velcro Closure , Hfnc Cannula Adult , Adult Diaper Medium Size, Tape Style, 42 Inch, Cotton, Unisex , Abdominal Binder Extra Large Size, Material: Polyester+Rubber+Nylon With Velcro Closure , Arterial Line Cannula 20G 3.8Cm , Paediatric Long Breathing Circuits - 6 Meter Single Use Pediatric Expandable Anaesthesia Circuit With Bifurcated Wye With 1 L Breathing Bag , Air Bed, Material: Pvc ; Size 78” By 34” ; Alternating Pressure Mattress , Nasal Cpap Neonatal Bonnets.Single Use, Colour Codedbiocompatible Microfibre, Soft Elastic Material With Attached Fixation Bands, Velcro Straps For Prongs And Masks. Size Xs ( Whitecolour ) , Stoma Bag With Wafersingle Piece, Odor Proof Multi Layer Pouch Material , Disposable Laryngeal Mask Airway 2Nd Generation, With Gastric Suction Portwith Soft Gel, Non-Inflatable Cuff Size 2.5 , Arterial Line Cannula 20G 3.6 Cm , Paediatric Cuff Bp Apparatus : Display Type-Manual, Material - Nylon, Band Size-17 To 22Cm , Disposable Laryngeal Mask Airway 2Nd Generation, With Gastric Suction Portwith Soft Gel, Non-Inflatable Cuff Size 2.0 , Short Sheath 4F Vascular Introducer Sheath , Disposable Laryngeal Mask Airway 2Nd Generation, With Gastric Suction Portwith Soft Gel, Non-Inflatable Cuff Size 1.5 , Sharp Waste Disposal Cans Size: 5 L Printed With Biohazard Symbol Colour: Blue Material : Plastic, Properties : Leak Proof , Puncture Proof And Tamper Proof ( It Should Not Be Possible To Remove Items That Have Been Dropped In The Can ) A Marked Line Along The Circumference Of The Sharp Can To Indicate The Level That Should Be Considered As Full , Mlscopy Tubes 5.0 Mm Latex Free Medical Grade Plastic Tube, Adult Length, High Volume, Low Pressure Cuff, Kink Resistant , Mlscopy Tubes 5.5 Mm Latex Free Medical Grade Plastic Tube, Adult Length, High Volume, Low Pressure Cuff, Kink Resistant , Intubation Guiding Bougie ( Paediatric ) 3 Mm Diameter, 35Cm Length, Tip Angulated At 30 Degree, Gum Elastuc Bougie , Microcuff Tubes Size 4.0 Pediatric Sized Tubes With High Volume Low Pressure, Microthin Polyurathane, Short Cylindrical Cuff. Latex Free , Manual In Line Closed Suction Catheter For Endotracheal Tubes ( 12F, 14F ) , Pvc Tubing, With Thumb And Finger Tip Contr , Mlscopy Tubes 6.0Mmlatex Free Medical Grade Plastic Tube, Adult Length, High Volume, Low Pressure Cuff, Kink Resistant , Dual Heated Infant Breathing Circuit Kit With Mr290 Autofeed Chamber ( Flow> 4L / Min ) , Material- Polyvinyl Chloride , Intubation Guiding Bougie ( Adult ) 4Mm Diameter, 70 Cm Length, Tip Angulated At 30 Degree, Gum Elastuc Bougie , Air Mattress With Air Pump And Pressure Setting, Dimensions : 200X90x7 Cm Tube Length 200Cm , Weight Bearing Capacity 135 Kg, Material Polyvinyl Chloride, Air Flow 3L / Min , Manual In Line Closed Suction Catheter For Tracheostomy Tubes ( 12F, 14F ) , Pvc Tubing, With Thumb And Finger Tip Contr , Head Ring Base Size 200 -220 Mm*45Mm-50Mmmade Of Silicon Material , Microcuff Tubes Size 5.0 Pediatric Sized Tubes With High Volume Low Pressure, Microthin Polyurathane, Short Cylindrical Cuff. Latex Free , Dual Heated Neonatal Breathiing Circuit Kit With Evaqua Technology And Mr290 Autofeed Chamber Withheating Wire For Series Ventilators , Microcuff Tubes Size 4.5 Pediatric Sized Tubes With High Volume Low Pressure, Microthin Polyurathane, Short Cylindrical Cuff. Latex Free , Sharp Waste Disposal Cans Size: 2 L Printed With Biohazard Symbol Colour: Blue Material : Plastic, Properties : Leak Proof , Puncture Proof And Tamper Proof ( It Should Not Be Possible To Remove Items That Have Been Dropped In The Can ) A Marked Line Along The Circumference Of The Sharp Can To Indicate The Level That Should Be Considered As Full , Microcuff Tubes Size 3.5 Pediatric Sized Tubes With High Volume Low Pressure, Microthin Polyurathane, Short Cylindrical Cuff. Latex Free , Universal Gel Pad -Size Around 500Mm*300Mm*10-15Mm , Nasophayngeal Airway: A Disposable, Flexible Soft Pvc, Beveled Tip Tube Which Goes Through The Nose And Ends At The Base Of The Tongue Size - 6.5 , Head Ring Base Size 140-150Mm*35-40Mmmade Of Silicon Material , Abdominal Binder Xxl Size Material: Polyester+Rubber+Nylon With Velcro Closure , Microcuff Tubes Size 5.5 Pediatric Sized Tubes With High Volume Low Pressure, Microthin Polyurathane, Short Cylindrical Cuff. Latex Free , Universal Precaution Kit, The Kit Includes Full Body Cover, Face Helmet, Hand Gloves, Shoes Cover, Face Mask , Cuff Pressure Monitor Analog System Hand Held Endotracheal Cuff Pressure Monitor, Gauge Range Of 0-120 Cm Of H2o , Supraglottic Airway 2 Second Generation Airway With Gastricaccess, Soft Elongated Cuff For Effective First And Second Seal Anatomically Shaped Eliptical Airway, Should Have Fixation Tab And Integral Bite Block , Arterial Access Catheter For Pressure Monitoring Paediatric Sterile 20 Gauge Catheter 8Cm Length With Guidewire Made From Polyethylene Material With Needle For Insertion Of 20 Guage , Cautery Pencil - Disposable, Standard Hand Control Push Button Electro Surgical Cautery Pencil 3-Pin With 150Mm Blade & 3 Meter Cable, Monopolar , Disposable Ventilator Tubing Set ;Pediatrics: 1.5 Meter , Single Use, Dual Limb Tubings , Connector Material-Poly Propylene , Tube Material- Ldpe+Eva , Manual Resuscitation Bags Adult Silicone, Self Inflating, Autoclavable, 2000Ml Capacity With Nonrebreathing Valve At Patient End And Port For Oxygen At Other End , Nasophayngeal Airway: A Disposable, Flexible Soft Pvc, Beveled Tip Tube Which Goes Through The Nose And Ends At The Base Of The Tongue Size - 6 , Introducer Needle 18G Bevelled Shape Stainless Steel Puncture Needle. , Disposable Laryngeal Mask Airway 2Nd Generation, With Gastric Suction Portwith Soft Gel, Non-Inflatable Cuff Size 1.0 , Head Ring Base Size 90-95Mm*20-25Mmmade Of Silicon Material , Manual Resuscitation Bags Infant :Material- Latex Free Silicon Material; 100% Autoclavable, Capacity: 250Ml And 500Ml
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 39
Maharashtra View Result →
21.
Educational and Research Institute #11341162 Price Bid
Tender For Supply Of Physics Lab Equipments = Limited- 2 Digital Balance- Weight 500G, Accuracy 0.01G, Top Pan.Tare Function,Caliberation- Automatic External Display Type: Led 3 Joule’S Calorimeter - Copper Vessel, Battery Eliminator-3A, (2,4,6,8,10,12 V), Tubularrheostat 20-3.3A, One Way Plug Key, Analog Type Dc Ammeter (0-2A), Voltmeter (0-5V), Thermometer (Alcohol), Stop Clock 4 Ic Regulated Battery Eliminator - Ic Regulated, Input: 230V Ac; Output: 0-12V Dc In Steps Of 2V; Capacity: 1A Or 2A. 5 Galvanometer- Moving Coil Type, 30-0-30 Scale, Unbranded With Bhel Specification-Sensitivity 0.143Mm/V 6 Voltmeter- Dc Voltmeter; Range 0–10 V, Analog 7 Ammeter - Dc (0-2) Amp 8 Decade Resistance Box - Resistance Box 12 Month Warranty (Dial Type) -Manganin Coil- 2 Dials 9 Parallelogram Apparatus- Paralleogram Law Of Forces Apparatus Fitted With Stand 10 Sonometer Apparatus-Sonometer With Meter Scale Attached Along With Knife Edge, Tuning Forks Set 256, 384, 512 Ranges, Hammer, Slotted Weight - 500 Gm Each To A Total Of 3 Kg. Brass Wire (5 M) 11 Potentiometer- It Features A 1-Meter To 10-Meter Constantan/Manganin Wire Stretched On A Wooden Or Sunmica Baseboard With A Millimeter Scale. It Includes 4Mm Brass Terminals, A Pencil Jockey For Contact, Wire Options (10 Wires), And A Typical Resistance Range Of 10-20 Ohms, Ideal For High-Precision Voltage Measurements. 12 Rheostat- High-Grade Ceramic Tube, Oxidized Resistance Wire, 0.5A–5A, Range 10Ω–100Ω. 13 Deflection Magnetometer Apparatus With Compass Box And Two Short Bar Magnets 14 Solar Cell Kit- The Apparatus Consist Of Variable Dc Power Supply, Led, Solar Cell And Two Multimeters (Or An Ammeter And A Voltmeter). A Variable Dc Power Supply Of 0-5V. Light Source Is Provided By Led. The Illumination Intensity Of The Led Can Be Controlled 15 Wheatstone Bridge Kit - Series Arm: Four Decade Dials In Steps Of Thousands, Hundreds, Tens, & Units Of OhmS.Ratio Arm: The Ratio Arm Of The Bridge Is Capable Of Selecting Multiplying Factor Of 0.001, 0.01,0.1, 1, 10, 100, 1000 For Resistance Measurements.Two Press Keys Are Provided, One Marked B Is For Battery & One Marked G Is For Galvanometer One Toggle Switch Is Provided For Internal Batterya Sensitive Galvanometer Is Provided In The Bridge. 16 OhmS Law Verification Kit-Battery Eliminator-3A, (2,4,6,8,10,12 V), Tubular Rheostat 20-3.3A,One Way Plug Key,Analog Type Dc Ammeter (0-2A), Voltmeter (0-5V),Standard Resistance Coil Of 1, 2 Ohm (2-Set) Wound On A Wooden Bobbin
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
22.
Housing Urban and Rular Development #11335412 AOC
Replacement Of Roofing And Misc.Works At Barrack No.13 At Old Hydrabad House , Nagpur (Only For Society) (2Nd Call).- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material uptoa distance of 50m.beyond the building area and stacking and spreading as directed,dewatering,preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 2 Providing soling using80mm sizetrapmetalin15cm.layerincludingfilling voidswith Crushed sand/grit, ramming, watering etc. complete. 3 Providing and laying Castinsitu/Ready Mix cement concrete inM-10oftrap/granite/ quartzite/gneiss metal for foundation and bedding including bailing outwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishing if required and curing complete,with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) 4 Dismantlingbrickmasonryinlimeorcementmortarandstackingthematerilsasdirected with all leads, lifts etc. 5 Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials,stacking the same as and where directed in the compound including scaffolding etc. complete. 6 Removing rafters from roof including the materials asdirectedwithallleads ,liftsetc. complete. 7 Removing purlins from roof including stacking as directed with all leads , lifts etc. complete. 8 Providing second class Burnt Brick masonry with conventional/I.S.type bricks in cement mortar1:6insuperstructureincludingstrikingjoints,rakingoutjoints,wateringand scaffolding etc. Complete 9 Providing and laying Castinsitu/Ready Mix cement concreteM-20oftrap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping, compactionandrougheningthesurfaceifspecialfinishistobeprovidedandcuringetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 10 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C.pilecaps,footings,foundations,slabs,beamscolumns,canopies,staircase,newels, chajjas,lintelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 11 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing,gussetplatesetc.asperdetaileddesignsanddrawingsoras directedincluding cutting,fabricating,hoisting,erectingfixinginposition, Makingriveted/bolted/welded connectionandone coat of anticorrosive paint andover it 2 coats of oil painting approved quality and shade etc. complete. 12 Providing Gas or Electrical welding for structural steel section, plates as per detailed drawing. For less than 10 mm thick section. 13 Providing andfixing colourcoatedZincalume (R)AZ150(min150gms/sq.mt.totalon each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength,metallichotdipcoatedwithAluminium-Zincalloy(55%aluminium 43.4%zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganicpigment).Thepaintshallhaveatotalcoatingthicknessofnominal35um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center.The endribshallbedesignedforanti-capillarygroove.andreturnleg.Thefeed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 14 Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( withinorganic pigment). The paint shallhave atotal coating thickness ofnominal 35mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter- to-center.Theendribshallbedesignedforanti-capacitygroove.andreturnleg.Thefeed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre)600 mm girth (Surface Width). 15 Providing internal cement plaster 20mm thick in a single coat using Ready to use wall plasterto concrete, brick surfaces in all positions including scaffolding and curing. Providing groove at joint of B.B.Masonry and concrete members complete.a) cement ratio 1:5 With Prior Approval of Concerned S.E. 16 Providing internal cement plaster 12 mm thick in a single coat using Ready to use wall plaster to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B. Masonry and concrete members complete.a) cement ratio 1:5 With Prior Approval of Concerned S.E. 17 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water,Steel centering,formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 18 Providing and laying Vitrified MATT finishhaving decorative type of size 1000 millimeter x 1000 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical andconfirmingtoIS15622-2006(GroupBla)ofapprovedmakeshadeandpatternfor flooringinrequiredpositionlaidonabedofbondingchemicalfillingjointscuringand cleaning etc .complete. 19 Supply & Fixing ofRock / Stone Finished outdoor vitrified flooring Tiles 16 mm thick and required width wide in plain pattern includingCement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning complete. with prior approval of concerned Superitending Engineer. 20 PRIVIDING AND FIXING ANTIMICROBIAL ACOUSTICAL FALSE CEILING: Bioguard Mineral Fibre Acoustical Suspended Ceiling System with 19mm thick Acoustics Microlook 90 Edge Tiles with 15mm face exposed grid. The tiles shall have smooth bright laminated visual with Humidity Resistance (RH) of 99%, NRC 0.7 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 41db as per ASTM E1414, Light Reflectance ≥87% as per ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of Class 0/1 as per BS 476 Part6/7 and Class A as per ASTM E 84with 19mm Square Tegular/Microlook 90˚ edge and 8mm drop in module size of 600 x 600mm./ 600x1200mm. The scrim on the face of the tile shall be cleanable, washable up to 500 cycle as per ASTM D-4828 and resistant to disinfectants. The tile shall be treated with Anti Microbial coating on the face of the tile to achieve cleanroom classification of class 5 (Class 100) as per ISO 14644-1 and suitable forzone 4 area having partical emission under normal conditions of ISO 5, Decontamination Class of CP10 and Bacteriological Cleanliness Class B1 for specific strains as per NF S 90-35:2003 The tile shall have a rating of 8 or above (face) for tests conducted for Resistance to growth of Mold in accordance to ASTM D3273. It shall be suitable for Green Building application, with Recycled content of 35% having VOC and Formaldehyde emission rate less than 0.1mg/m2/hr. The tile shall have certifications from GRIHA and GreenPro thereby confirming that it is an environment friendly product. SUSPENSION: The tile shall be laid on 15 mm wide T - section flanges colour global white (matching to tile color) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 12.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15kg/m. 21 Transportation of material obtained from debris of various sorts excavated stuff including necessary excavation/ loosing including loading, unloading and conveying and disposing as directed.( Beyond 10 Km. ) 22 Providing royalty charges against royalty paid by the contractor to the Revenue department for supply of different construction material for which royalty is necessary. Natural Sand 23 Testing Charges for Conducting BASIC TEST OF CEMENT.Standard ConsistancyFineness, Specific Gravity,Setting Time ( Initial & Final ), CompressiveStrength, Soundness etc. complete. 24 Testing Charges for Conducting BASIC TEST OF FINE AGGREGATES. Fineness Modulus ( Sieve Analysis ),Silt & Clay Content 25 Testing Charges for Conducting BASIC TEST OF BRICKS Water Absorption (Set of 5 Bricks), CompressiveStrength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks). 26 Testing Charges for Conducting BASIC TEST OfSTEEL BAR TESTING Upto 16 mm(Set of 3 Bars)
Contract Date: Jun 22, 2026 Contract Value : 18.51 Lakh
Government Departments No of Bidders 2
Maharashtra View Result →
23.
Housing Urban and Rular Development #11333527 Technical Bid
Tender For Rate Contract For Tentage Work Like Safe House, Dome, Stage Etc. Construction Including Barricating And Miscellaneous Works And Electric Work While Vip Visits Under Pwd Division Dungarpur Distt Dungarpur= 1 Hire Charges Includes Transporatation At Site Within Division Boundary, Loading, Unloading, Placing And Removing Complete. For Any Place With In Division Boundary. Hire Charges For 3 Days.Chairs : Pvc Chair 2 Plastic Cane Chair Of Aluminium Pipe With Arms. Steel Pipe Pedded Chair 3 Tables :Tables : Wooden Table 6 X 3 (Babool). 4 Tables : Centre Table Glass Top 2X4 5 Floor Covering :Cotton Durry (Old). 6 Cotton Durry (New). 7 Non Woven Synthtic Carpet (Red/Green) (New) 8 Woolen Carpet (New). 9 White Cotton Chader (Sheet) (Washed) 10 Pipe Pandal With Covering Ht From To 12 To 18 Ft 11 Curtain Cloth (View Cutter ) Made Out Of Steel Pipe Frame Covering With Good Quality White Cloth To Cut View Including Making Holes And Made Necessary Strengthening Support Against Wind Pressure Complete . 12 Kanat Fixed With Tent. (15X6) 13 Kanat Fixed Without Tent. (15X6) 14 5Mm Galvanised Iron (G.I) Pipe 6 Mtr. Long With New Silk Flag. 15 Water Proof Tripal. 16 Wooden Stage Height 60Cm.With Steps Complete 17 Wooden Stage Height 120 To 180 Cm.With Steps Made Of 50 Mm Dia Iron Pipe Frame With Adjustable Height System And Having Smooth Top Wooden Board Complete . 18 Cotton Mattress With White Sheet (Chader). 19 Dunlop Mattress With White Chadar Size 6X3. 20 Massand With White Cover. 21 Speech Stand Having Sunmica Top. 22 White Cotton Cloth Cover For Padded Chair Inculding Ribbon 23 Barricading With Sal Ballies As Per Design Including Tying With Vertical Post By Coconut Strings Including Digging Out Holes In All Types Of Soil Complete In All Respect With Two Horizontal Members Height 1.2 M Upto 1.5M Above Ground Level And Vertical Supports Upto 2.5 Centre And Upto 3 Days Period Including Removal And Cleaning The Site Complete In All Respect & Including Dressing Of Sides And Providing Retro Reflective Tapes For Traffic Safety As Per Direction Of Engineer-In Charge In All Types Of Soil. 24 Barricading With M.S. Pipe As Per Design Including Tying With Vertical Post Including Digging Out Holes In All Types Of Soil Complete In All Respect With Two Horizontal Members Height 1.2 M Upto 1.5M Above Ground Level And Vertical Supports Upto 2.5 Centre And Upto 3 Days Period Including Removal And Cleaning The Site Complete In All Respect & Including Dressing Of Sides And Providing Retro Reflective Tapes For Traffic Safety As Per Direction Of Engineer-In Charge In All Types Of Soil. 25 Making Of Holes In Cement Concrete/ Bitumenous Road By Power Driven Hammer For Barricating Work As Per Direction Of Engineer In Charge 26 Hire Charges For Folded Type Two Seater Sofa Set (Cum Bed) With Good Quality White Cloth Cover 27 Vip Chair With Cushion 28 Add Extra For Hire Charge For Providing Welded Mesh Size 25X25 Mm (16Swg) Over Barricating (Excluding Hire Charge Of Barricating) 29 Water Proof Tent With Pipe Pandal Supported With Bamboo/Balli /Ms Pipe Frame. 30 Water Proofing Canopy With Ornamental Frill, Inner Ceiling & Curtains Above Size 20X20 31 Three Seater 32 Chemical Toilet With House Keeping Arrangement And Providing Liquid Soap, Tissues, Comb, Freshener Etc. 33 Water Proof Dome With Truss Steel Strcture, Inner Ceiling & Curtains 90 Span 34 Aluminium German Hanger Tent Roof Made Up Of Waterproof, Fire Resistant Synthetic Rubber Fabric Of 885 Gsm. 35 Hire Charges For Led Flood Light Luminaire ( White Or Warm White As Required )For 90- 150 Watt With The Standard Housing ,Pole & Mounting Accessories With Wiring, Connection With Skilled Operator To Operate System Etc. As And When Required. With Suitable Pole For 1St Day 36 For 2Nd / 3Rd Day 37 Without Suitable Polefor 1St Day 38 For 2Nd / 3Rd Day 39 Hire Charges For Led Screen Day Light Type (P3.9) Of Suitable Size For Display Complete With Mounting Arrangement/Scaffolding, Masking Of Mounting Stand, Signal Booster, Network Switch /Splitter, Data And Power Cables And Sound System Arrangement Etc. With Skilled Operator To Operate System Etc. As And When Required. For 1St Day 40 For 2Nd / 3Rd Day 41 Hire Charges For Hd Video Camera Suitable For Sdi/Hdmi Output, Recording In Dvd/Hard Disk Fuction Complete With Two Operator As And When Etc As Required. For 1St Day 42 For 2Nd / 3Rd Day 43 Hire Charges For Video Projection Arrangement (Excluding Screens) With 3 Nos. Video Camera (Pwm 120 Sony Nx 5Z7/Equivalent) Including Mixer (Pansonix Mx70/Data Video Mx500/ Equivalent) Complete With Required Hdmi/Sdi Etc. Wiring Vtr, Switchers, With Skilled Operator To Operate System Etc As And When Required. For 1St Day 44 For 2Nd / 3Rd Day 45 Hire Charges Of Crane With Operators For Video Camera For 360° Movement Complete Arrangement With Skilled Operator To Operate System As And When Etc As Required. For 1St Day 46 For 2Nd / 3Rd Day 47 Hire Charges For 42\ Hd Led/Plazma Tv Complete With Mounting Arrangement , Connections, Testing Etc. With Skilled Operator To Operate System Etc As And When Required. For 1St Day 48 For 2Nd / 3Rd Day 49 Hire Charges For 50/52\/Higher Sizes Hd Led/Plazma Tv Complete With Mounting Arrangement , Connections, Testing Etc.With Skilled Operator To Operate System Etc As And When Required. For 1St Day 50 For 2Nd / 3Rd Day 51 Hire Charges For Equipments Required For Public Address & Sound System For A Very Important Public Function/ Vvip Visits Including Transportation,T&P,Scafolding, Testing And Connections With Trial Etc. With Skilled Operator To Operate System Etc As And When Required. 15 Inch 3 Way Line Array Speaker Adamson E15/L Acoustics -K1/D&B Gsl Or Equivalent Reputed Make/Model As Approved By Engineer In Charge.For 1St Day 52 For 2Nd / 3Rd Day 53 12 Inch 3 Way Line Array Speaker Adamson E12/L Acoustics -K2/D&B Gsl/Jbl A-12 Or Equivalent Reputed Make/Model As Approved By Engineer In Charge.For 1St Day 54 For 2Nd / 3Rd Day 55 Pentium -Iv Laptop With Hdmi Cable & Stereo Sound Output Make-Hp/Dell/Lenovo Or Equivalent As Approved By Engineer In Charge.For 1St Day 56 For 2Nd / 3Rd Day 57 Cross Overs For The Speakers Distributions Make- Dbx Or Equivalent As Approved By Engineer In Charge.For 1St Day 58 For 2Nd / 3Rd Day 59 Amplifier Suitable For The Installed Speakers/Sound System As Required.For 1St Day 60 For 2Nd / 3Rd Day 61 Suspension Kits With Suitable Stand For The 3-Way Speakers As Required.For 1St Day 62 For 2Nd / 3Rd Day 63 Required Necessary Snake Cables,Audio Connection Cables, Speakers Cables,Electrical Wiring, Boards, Connector Etc For Speakers/Horns Etc. As Required For 1St Day 64 For 2Nd / 3Rd Day 65 Top Speakers Jbl/Rcf Or Equivalent. As Approved By Engineer In Charge.For 1St Day 66 For 2Nd / 3Rd Day 67 Monitor Speakers Jbl/Rcf Or Equivalent. (For Stage) As Approved By Engineer In Charge.For 1St Day 68 For 2Nd / 3Rd Day 69 Cordless Mike Hi -End(For Vvip Visit)With Antenna Combiner Etc.Make:-Shure .Ad4D/Sennheiser 6000 Or Equivalent.Reputed Make/Model As Approved By Engineer In Charge..For 1St Day 70 For 2Nd / 3Rd Day 71 Digital Mixer (128+48) Digico Sd10/Avid S6L 24C/Dlive 7000 Or Equivalent..Reputed Make/Model As Approved By Engineer In Charge.For 1St Day 72 For 2Nd / 3Rd Day 73 Channel Mixer Digital (32+16) Midas M32/Sq7/ Sound Craft S1 Or Equivalent.Reputed Make/Model As Approved By Engineer In Charge.For 1St Day 74 For 2Nd / 3Rd Day 75 Effect Processors. Make:-Lss/Behringer Or Equivalent As Approved By Engineer In Charge.For 1St Day 76 For 2Nd / 3Rd Day 77 Compressors. Make:-Lss/Behringer Or Equivalent As Approved By Engineer In Charge.For 1St Day 78 For 2Nd / 3Rd Day 79 Amplifiers 700 Watt Rms At 100 Ohm.For Horns Make:-Ahuja/Qsc Or Equivalent As Approved By Engineer In Charge.For 1St Day 80 For 2Nd / 3Rd Day 81 Mikes With Big Stand. Make:-Shure/Akg/Sennheiser Or Equivalent As Approved By Engineer In Charge.For 1St Day 82 For 2Nd / 3Rd Day 83 32 Band Equalizer. Make:-Lss/Behringer Or Equivalent As Approved By Engineer In Charge.For 1St Day 84 For 2Nd / 3Rd Day 85 Snake Cable/Audio Cable/ Bnc Cable /Cat 6 Cable (100 Mtr) Including Accessories, Connection, Testing Etc. As Required.For 2Nd / 3Rd Day 86 For 2Nd / 3Rd Day 87 Hire Charges For Light Point Complete With Lamp,Holder,Wiring In Casing Or In Pvc Conduit , Controlling Switch And Circuit Protection McbS With Skilled Operator To Operate System As And When Etc As Required. For Shops/ Stalls Etc. For 1St Day 88 For 2Nd / 3Rd Day 89 Hire Charges For Power/Light Plug On Board Including Wiring In Pvc Casing Or In Pvc Conduit , Controlling Switch And Circuit Protection McbS With Skilled Operator To Operate System As And When Etc As Required. For Shops/ Stalls Etc. For 1St Day 90 For 2Nd / 3Rd Day 91 Hire Charges For Led Tube Light Fixture With 18/20 Watt With Skilled Operator To Operate System As And When Etc As Required.For 1St Day 92 For 2Nd / 3Rd Day 93 Hire Charges For Silent Type D.G. Set, Including Change Over Switch. Control Panel, 2 No. Pipe Earthing Etc. And Excluding Pol With Skilled Operator To Operate System As And When Etc As Required. Of Following Capacity:62.5 Kva 94 From 2Nd Day Onwards 95 125 Kvafor 1St Day 96 From 2Nd Day Onwards 97 Hire Charges Of Main Service Line For 3 Phase Connection Upto 50 Mtr. Length (Without Any Joint) Including Meter Board, Panel/Distribution Board And Supports With Skilled Operator To Operate System As And When Etc As Required. Upto 25.0 Sq.Mm Size Pvc Insulated And Sheathed Cable( Aluminium Armoured Or Un-Armoured As Required.) For 1St Week 98 For 2Nd / 3Rd Day 99 Above 25.0 Sq.Mm & Upto 95 Sq.Mm Pvc Insulated And Sheathed Cable Aluminium Armoured Or Un-Armoured As Required.)For 1St Week 100 For 2Nd / 3Rd Day 101 Above95.0 Sq.Mm Pvc Insulated And Sheathed Cable Aluminium Armoured Or Un-Armoured As Required.)For 1St Week 102 For 2Nd / 3Rd Day 103 Supply And Filling Of Pol For Dg Sets 104 Hire Charges Of Sub Service Line For Single/ Three Phase Connection Upto 30 Mtr. Length Including Dist. Board And Supports With Skilled Operator To Operate System As And When Etc As Required. Single Phase Upto 6 Sqmm Pvc Insulated And Sheathed Aluminium Cablefor 1St Week 105 For 2Nd / 3Rd Day 106 Three Phase & Neutral Upto 10 Sqmmpvc Insulated And Sheathed Aluminium Cablefor 1St Week 107 For 2Nd / 3Rd Day 108 Hire Charges For Jumbo Polycarbonate/Fiber Body Moveable Desert Cooler Complete With Water Filling And Operator With Skilled Operator To Operate System As And When Etc As Required. For 1St Day 109 For 2Nd / 3Rd Day 110 Hire Charges For Following Type Of Airconditioners Including Copper Piping , Drain Piping And Electrical Connections With Skilled Operator To Operate System As And When Etc As Required. 3.0 /4.0 Tr Tower Type Split Acfor 1St Day 111 2Nd Day Onwards 112 Hire Charges Of 1 Kva Online Ups With Battery (Backup Of 1 Hour At Full Load) With Wiring,Connection With Skilled Operator To Operate System As And When Required.. For 1St Day 113 For 2Nd / 3Rd Day 114 Hire Charges Of Public Address System For A Important Public Function With 5/ 6 No. Of Microphones With Following Nos Of Stand Hi Fi Box, Speakers/ Horns, Stand By Amplifiers , Battery Backup Complete Including Transportation Etc. With Skilled Operator To Operate System As And When Etc As Required. : 4 Nos 3 Way Big Box Speakers And Upto 20 Horn(5000 Audiences)For 1St Day 115 For 2Nd / 3Rd Day 116 Pipe Earthing As Per Is:3043- 1987 With 3.0 Mtr. Long, 40 Mm Dia. B Class G.I. Pipe Is: 1239 (Part-1) 2004, Equivalent To Bs : 1387 With Perforated Holes Of 12 Mm Dia ,Including All Accessories Like Nut, Bolts, Reducer, Nipple, Wire Meshed Funnel, Heavy Duty Weather Proof Poly-Propylene Earth Inspection Chamber As Per Requirement Of Is/Iec 62305 And Tested As Per Iec 62561-5 With Lockable Jam Free Lid Suitable For Safe Working Load 60 Kn Of Round / Square Size 250 Mm, And Height 250 To 300 Mm And Embodying The Pipe Complete With Alternate Layers Salt And Coke/ Charcoal, Testing Of Earth Resistance For Value Of 5 Ohms Or Less As Required. 117 Hire Charges For Following Type Of Airconditioners Including Copper Piping , Drain Piping And Electrical Connections With Skilled Operator To Operate System As And When Etc As Required. 8.5 Tr Ductable Type Split Acfor 1St Day
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 5
24.
Defence #11329346 AOC
Bid Are Invited For Acrylic Distemper, Make Asian,Berger, Dulux Or Equivalent. , White Cement, Birla Wall Care,Jk White,Berger,Asian Paints Or Equivalent Make , Melamine Solvent,Thinner, Approved Make , Wall Putty , Birla Wall Care,Jk White,Berger,Asian Paints Or Equivalent Make , Aggregate Stone 20Mm , Bricks, 75 No,1St Class , Coarse Sand Crusher , Aluminium Door Handle 4 Inch, Classic Or Equivalent Make , Brass Ferrul 15Mm, Standard Quality , Brass Ferrul 20Mm, Standard Quality , Brass Ferrul 25Mm, Standard Quality , Brass Spindle 15Mm Half Round, Standard Quality , Brass Shower Concealed Spindle 15Mm, Standard Quality , Cp Brass Toilet Paper Holder, Prayag,Supreme,Cera,Hindware,Parryware,Jaquar Or Equivalent Make , Cp Brass Single Lever Telephonic Wall Mixer, Prayag,Supreme,Cera,Hindware,Parryware,Jaquar Make , Cp Brass Extension Nipple 15X25Mm, ,Cera,Hindware,Parryware,Jaquar, Make , Cp Brass Extension Nipple 15X40Mm, ,Cera,Hindware,Parryware,Jaquar, Make , Cp Brass Grating 4 Inch Jali 50 Round And 50 Square , Cpvc Pipe 20Mm Dia, Prayag,Prince,Supreme,Ashirwad Or Equivalent Make , Cpvc Pipe 25Mm Dia, Prayag,Prince,Supreme,Ashirwad Or Equivalent Make , Cpvc Pipe 32Mm, Prayag,Prince,Supreme,Ashirwad Or Equivalent Make , Belmonte 8.25 Inch,Cm Dual Flush Siphone ,Single,One Piece Western Commode,Toilet,Ewc Repair Kit, Hindware, Cera, Sommany Or Equivalent , Gi Union 40Mm , Unik,Jindal Or Equivalent Make , Gi Elbow 15Mm Dia, Make Unik, Jindal Or Equivalent , Gi Elbow 20Mm Dia, Make Unik, Jindal Or Equivalent , Gi Nipple 15X100Mm, Standard Quality , Gi Nipple 15X150Mm, Standard Quality , Gi Nipple 15X50Mm, Standard Quality , Gi Nipple 15X75Mm, Standard Quality , Gi Nipple 20X100Mm, Standard Quality , Gi Nipple 20X150Mm, Standard Quality , Gi Nipple 20X50Mm, Standard Quality , Gi Nipple 20X75Mm, Standard Quality , Gi Nipple 25X150Mm, Standard Quality , Gi Nipple 25X50Mm, Standard Quality , Gi Nipple 32X50Mm, Standard Quality , Gi Nipple 40X100Mm, Standard Quality , Gi Nipple 40X150Mm, Standard Quality , Gi Nipple 40X50Mm, Standard Quality , Gi Nipple 40X75Mm, Standard Quality , Gi Nipple 50X100Mm, Standard Quality , Gi Nipple 50X150Mm, Standard Quality , Gi Nipple 50X50Mm, Standard Quality , Gi Nipple 50X75Mm, Standard Quality , Gi Plug 32Mm, Standard Quality , Gi Plug 50Mm, Standard Quality , Gi R-Elbow 25X40Mm, Standard Quality , Gi R-Socket 25X40Mm, Standard Quality , Gi Rsocket 32X40Mm, Standard Quality , Gi R-Socket 50X40Mm, Standard Quality , Gi Socket 15Mm, Standard Quality , Gi Socket 20Mm, Standard Quality , Gi Socket 32Mm, Standard Quality , Gi Tee 15Mm Dia, Standard Quality , Glass 4Mm Thick Plain, Unik,Jindal Or Equivalent Make , Glass 5.50Mm Thick Plain, Saint Gobin,Modi Guard Or Equivalent Make , Glass Putty In Bag 10 Kg , Standard Quality , Frosted Glass 5.5Mm Thck, Approved Make , Cupboard Door Knobs, Standard Quality , S.S Curtain Rod Wall ,Concealed Socket 25Mm Dia, Standard Quality , Ptmt - Waste Coupling 31,32 Mm , Paryag,Prince,Supreme,Ashirwad Or Equivalent Make , Ptmt Ball Cock With Rod And Ball 15Mm Compelte With Epoxy Coated Aluminm Rod And H.D, Paryag,Prince,Supreme,Ashirwad Or Equivalents Make , Ptmt Ball Cock With Rod And Ball 20Mm Compelte With Epoxy Coated Aluminm Rod And H.D Ball, Prayag,Prince,Supreme,Ashirwad Or Equivalent Make , Ptmt Grating Round Jali 125Mm Dia With ,Without Hole Paryag,Prince,Supreme,Ashirwad Or Equivalent Make , Pvc Bend,Elbow 75 Mm Dia, Finolax,Supreme,Plasto Or Equivalent Make , Ptmt Jet Spray With 1.5M Tube Prayag,Prince,Supreme,Ashirwad Make , Pvc Flush Pipe Long Bend With Fitting For Indian Toilet Seat, Paryag,Supreme,Ashirwad Make Or Equivalent , Pvc Flush Pipe Short Bend With Fitting For European Toilet Seat Standard Quality , Pvc Socket 75 Mm Dia, Paryag,Supreme,Ashirwad Make Or Equivalent , Pvc Syphon For Low Level Cistern, Paryag,Supreme,Ashirwad Make Or Equivalent , S.S Connection Pipe 450Mm For Geyser Hot Water , Special Rubber And Pvc Plastic Door Back Rubber, Standard Quality , Pvc Connection Pipe 600Mm Long With Union, Prayag,Prince,Supreme,Ashirwad Make Or Equivalent , S.S Connection Pipe For Basin Mixer Standard Quality , S.S Curtain Rod Wall Stand Bracket,Holder Suitable For 25Mm Dia Pipe, Standard Quality , Paving Bitumen Of Grade Vg-10 Of Approved Quality , Orissa Pattern W.C. Pan 580X440 Mm, ,Cera,Hindware,Parryware,Jaquar, Or Equivalent Make , White Plastic Seat Solid With Lid C.P. Brass Hinges And Rubber Buffers, ,Cera,Hindware,Parryware,Jaquar,Kingstone Or Equivalent Make , G.I. Pipes 15 Mm Dia, Jindal, Surya, Tata Or Equivalent Make , G.I. Pipes 20 Mm Dia, Jindal, Surya, Tata Or Equivalent Make , G.I. Pipes 25 Mm Dia, Jindal, Surya, Tata Or Equivalent Make , G.I. Pipes 50 Mm Dia, Jindal, Surya, Tata Or Equivalent Make , Rectangular Shape 600X450 Mm Precast R.C.C. Manhole Cover With Frame - L.D. - 2.5 Each, Make Dalal, K.K., Sushma Enterprises , C.I. Cover And Frame 300X300 Mm Inside Approved Make , C.I. Cover Without Frame 300X300 Mm Inside Weight Not Less Than 4.50Kg, Approved Make , Ci Detachable Joint 250Mm, Standard Quality , Stainless Steel Kitchen Sink - With Drain Board 510X1040 Mm Bowl Depth 178 Mm, Make Jindal, Nirali Or Equivalent , Stainless Steel Kitchen Sink - Without Drain Board 610X460 Mm Bowl Depth 200 Mm, Make Jindal, Nirali Or Equivalent , Cpvc Ball Valve 32Mm, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Brass Threaded Elbow 15X15Mm, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Brass Threaded Elbow 15X20Mm, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Elbow 20Mm Dia, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Elbow 25Mm, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Elbow 32Mm, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Fta 32Mm, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Male Adapter Brass Threads 20Mm Dia, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Male Adapter Brass Threads 25Mm Dia, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Mta 20X15Mm, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Mta 32Mm, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Pipe Clamp 20Mm Dia, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Pipe Clamp 25Mm Dia, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Socket 20Mm Dia, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Socket 25Mm, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Socket 32Mm, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Solvent 100 Ml Pack , Astral Or Equivalent , Cpvc Tank Nipple 32Mm, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Tee 20Mm Dia, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Tee 25Mm, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Tee 32Mm, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Union 20Mm Dia, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Union 25Mm, Prayag,Prince,Supreme,Ashirwad Make , Cpvc R-Coupling 20X15Mm, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Tank Conector 20Mm Dia, Prayag,Prince,Supreme,Ashirwad Make , Cpvc Tank Conector 25Mm, Prayag,Prince,Supreme,Ashirwad Make , Brass Ball Valve Screed 15Mm Dia, Zoloto Kirloskar Or Equivalent Make , Brass Ball Valve Screed 25Mm Dia, Zoloto Kirloskar Or Equivalent Make , Brass Ball Valve Screed 32Mm Dia, Zoloto Kirloskar Or Equivalent Make , Brass Ball Valve Screed 50Mm Dia, Zoloto Kirloskar Or Equivalent Make , Gm Gate Valve 32Mm, Zoloto Kirloskar Or Equivalent Make , Lead Wool, Standard Quality , M-Seal , Cutter Blade 4Inch For Tiles And Marble, Standard Quality , Cutter Blade 5Inch For Wooden And Plyboard, Standard Quality , Nails 1.5Inch, Standard Quality , Nails 4 Inch, Standard Quality , Soot Gola Pack Of 20 Gola , Standard Quality , Stainless Steel Welding Rod Size 3.15X350Mm Pack Of 2Kg , Mangalam Or Equivalent , Stainless Steel Wire Mesh, Standard Quality , Hot Water Connection Pipe 600Mm Long Make Paryag Or Equivalent , Toughened Glass Door Lock Make Godrej Or Equivalent , 18Mm Plywood Size Of 8 Feetx4 Feet With Termite Proof And Water Resistance Make Century Or Sainik , 6Mm Plywood Size Of 8 Feetx4 Feet With Termite Proof And Water Resistance
Contract Date: Ref. Documents Contract Value : 16.86 Lakh
Government Departments No of Bidders 4
25.
Educational and Research Institute #11326523 Technical Bid
Tender For Purchase Of Non-Consumables For Physics Lab In Basic Engineering (First Year) Department = Limited- 2 Joule Calorimeter - Copper Vessel, Battery Eliminator 3A, (2,4,6,8,10,12 V), Tubular Rheostat 20-3.3A, One Way Plug Key, Analog Type Dc Ammeter (0 2A), Voltmeter (0-5V), Thermometer (Alcohol), Stop Clock 3 Ic Regulated Battery Eliminator- Ic Regulated, Input: 230V Ac; Output: 0-12V Dc In Steps Of 2V; Capacity: 1A Or 2A. 4 Galvanometer- Moving Coil Type, 30-0-30 Scale, Unbranded With Bhel Specification-Sensitivity 0.143Mm/V 5 Voltmeter- Dc Voltmeter; Range 0–10 V, Analog 6 Ammeter- Dc (0 - 2 Amp) 7 Parallelogram Apparatus- Parallelogram Law Of Forces Apparatus Fitted With Stand 8 Decade Resistance Box- Resistance Box 12 Month Warranty (Dial Type) -Manganin Coil- 2 Dials 9 Sonometer Apparatus- Sonometer With Meter Scale Attached Along With Knife Edge, Tuning Forks Set 256, 384, 512 Ranges, Hammer, Slotted Weight - 500 Gm Each To A Total Of 3 Kg. Brass Wire (5 M) 10 Travelling Microscope- Branded Travelling Microscope 0 200 Mm Horizontal And 0-150 Mm Vertical Measurement 11 Potentiometer - It Features A 1-Meter To 10-Meter Constantan/Manganin Wire Stretched On A Wooden Or Sunmica Baseboard With A Millimeter Scale. It Includes 4Mm Brass Terminals, A Pencil Jockey For Contact, Wire Options (10 Wires), And A Typical Resistance Range Of 10-20 Ohms, Ideal For High-Precision Voltage Measurements. 12 Viscosity Apparatus – StokeS Apparatus With Metre Scale Attached And Long Cylindrical Glass Jar, Glass Beads Small Size (1 Box), Screw Gauge (0-15 Mm) 13 Rheostat - High-Grade Ceramic Tube, Oxidized Resistance Wire, 0.5A 5A, Range 10Ω–100Ω. 14 Deflection Magnetometer Apparatus - Deflection Magnetometer Apparatus With Compass Box And Two Short Bar Magnets 15 Solar Cell Kit- The Apparatus Consist Of Variable Dc Power Supply, Led, Solar Cell And Two Multimeters (Or An Ammeter And A Voltmeter). A Variable Dc Power Supply Of 0 5V. Light Source Is Provided By Led. The Illumination Intensity Of The Led Can Be Controlled 16 Wheatstone Bridge Kit- Series Arm: Four Decade Dials In Steps Of Thousands, Hundreds, Tens, & Units Of OhmS. Ratio Arm: The Ratio Arm Of The Bridge Is Capable Of Selecting Multiplying Factor Of 0.001, 0.01, 0.1, 1, 10, 100, 1000 For Resistance Measurements. Two Press Keys Are Provided, One Marked B Is For Battery & One Marked G Is For Galvanometer One Toggle Switch Is Provided For Internal Battery A Sensitive Galvanometer Is Provided In The Bridge. 17 OhmS Law Verification Kit- Battery Eliminator-3A, (2,4,6,8,10,12 V), Tubular Rheostat 20-3.3A, One Way Plug Key, Analog Type Dc Ammeter (0-2A), Voltmeter (0-5V), Standard Resistance Coil Of 1, 2 Ohm (2-Set) Wound On A Wooden Bobbin 18 Boyle’S Law Apparatus - The Apparatus Includes The Quill Tube, A Retort Stand, A Clamp, And A Mounted Meter Scale. Quill Tube Specifications: Length: Approximately 50 Cm. Bore Diameter: Uniform Bore, Roughly 1 Mm To 2 Mm. Construction: Glass Tube With One End Sealed. Trapped Substance: A Mercury Pellet (Or Thread) Of Length 10 To 15 Cm Is Introduced To Enclose A Column Of Air. Mounting: Attached To A Half-Meter Or Meter Scale. 19 Torsional Pendulum - Torsional Pendulum Metallic Disc, Symmetrical Masses And Pendulum Stand, Steel Wire 20 Compound Bar Pendulum- One Meter Long Iron Strip Well Painted With Holes At A Distance Of Every 5 Cm And Also With Pair Of Brackets And A Heavy Base Table Top Stand With Stop Clock 21 Helical Spring Apparatus-- Structure: A Rigid Support Mounted On A Heavy Metal Base, Typically Cast Iron, To Ensure Stability During Tests. Springs: High-Tensile Steel Spiral Springs, Typically (Approx 25 Mm) Diameter, (100 Mm) Long. Measurement Scale: A Vertical Steel Meter Scale, Usually With (1Mm) Graduations, For Precise Deflection Measurement. Loading Mechanism: A, Typically (50G), Hook-Attached Weight Hanger At The Bottom.Pointer: A Fine Pointer Attached To The Bottom Of The Spring Moves Along The Scale. Accessories: Includes A Set Of Slotted Weights (E.G., (6Times 50G) Or Similar Sets) For Incremental Loading.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
26.
Heavy Industries and Public Enterprises #11321092 Technical Bid
Tender For Civil And Mep Works For Setting Up Hindlabs Minor Lab, Barpeta, Assam- 1 Civil Works 2 Solid Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 30X20X15Cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level With Thickness 15Cm In : Cm 1:6 ( 1 Cement : 6 Coarse Sand) Etc Complete 3 12 Mm Cement Plaster Of Mix:1:6 (1 Cement : 6 Fine Sand). 4 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade:New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) 5 Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface:Water Thinnable Cement Primer 6 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 7 Providing And Laying Premiumvitrified Tiles In Floor In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) Jointing With Grey Cement Slurry @3.3 Kg/Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc. The Tiles Must Be Cut With The Zero Chipping Diamond Cutter Only . Laying Of Tiles Will Be Done With The Notch Trowel, Plier,Wedge, Clips Of Required Thickness, Leveling System And Rubber Mallet For Placing The Tiles Gently And Easily.Glazed Vitrified Tiles Matt/Antiskid Finish Of Size Size Of Tile 600 X 1200 Mm 8 Providing And Laying Premium Vitrified Wall Tile In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600 X 1200 Mm 9 Providing And Fixing Fiber Glass Reinforced Plastic (Frp) Door Frames Of Cross- Section 90 Mm X 45 Mm Having Single Rebate Of 32 Mm X 15 Mm To Receive Shutter Of 30 Mm Thickness. The Laminated Shall Be Moulded With Fire Resistant Grade Unsaturated Polyester Resin And Chopped Mat. Door Frame Laminate Shall Be 2 Mm Thick And Shall Be Filled With Suitable Wooden Block In All The Three Legs. The Frame Shall Be Covered With Fiber Glass From All Sides. M.S. Stay Shall Be Provided At The Bottom To Steady The Frame. 10 Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. 11 Providing And Fixing To Existing Door Frames.30 Mm Thick Fiberglass Reinforced Plastic (F.R.P) Flush Door Shutter In Different Plain And Wood Finish Made With Fire Retardant Grade Unsaturated Polyester Resin, Moulded To 3 Mm Thick Frp Laminate All Around, With Suitable Wooden Blocks Inside At Required Places For Fixing Of Fittings And Polyurethane Foam (Puf) / Polystyrene Foam To Be Used All Filler Material Throughout The Hollow Panel, Casted Monoolithically With Testing Parameters Of F.R.P. Laminate Conforming To Table - 3 Of Is : 14856, Complete As Per Direction Of Engineer- In-Charge. 12 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 13 Supplying And Fixing Cp Health Faucet Superior Quality ( Jagur Or Equvalent Make ) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. 14 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 15 Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per Is 13983 With C.I. Brackets And Stainless Steel Plug 40 Mm,With Swan Neck Faucet With Pipe In Let And Drain Provision, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required:Kitchen Sink With Drain Board510X1040 Mm Bowl Depth 250 Mm 16 Providing And Fixing Ptmt Liquid Soap Container 109 Mm Wide, 125 Mm High And 112 Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour, Weighing Not Less Than 105 Gms 17 Providing And Fixing Cp Towel Rod Complete Fixed With Cp Brass Screws Of Approved Quality Of Minimum 600Mm Length Approved As Per The Requirement Of Engineer In Charge. 18 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions: 45 Cm Length15 Mm Nominal Bore 19 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. Flexible Pipe 40 Mm Dia 20 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is: 893115 Mm Nominal Bore 21 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 15 Mm Pipe 10Kgf/Cm2 22 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge.Concealed Work,Including Cutting Chased And Making Good The Wall Etc. 20 Mm Pipe 12 Kgf/Cm2 23 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 32 Mm Dia 6 Kgf/Cm2 - External Work - Exposed On Wall 24 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 25 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement -75 Mm Dia 45 Degree Elbow 26 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 75X75X75 Mm Dia Door Tee 27 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 75 Mm Dia Bend 28 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge.Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 50 Mm Pipe 10 Kgf/Cm2 29 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes,Including Jointing With Pvc Solvent Cement - 75 Mm Dia Vent Cowl 30 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement -75 Mm Dia End Cap 31 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement -110 Mm Dia End Cap 32 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 110X110X110 Mm Dia Door Tee 33 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement- 110 Mm Dia Bend 34 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/Clips At 1.00 M Spacing. This Included Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 75 Mm Dia 6Kgf/Cm2 - External Work- Exposed On Wall 35 Providing And Fixing 12 Mm Thick Frameless Toughened Glass Partition Of Approved Brand And Manufacture, Including Top & Bottom Fixing Arrangement And Making Necessary Holes Etc. For Fixing Required Fittings, All Complete As Per Direction Of Engineer-In-Charge. 36 Providing And Fixing 12 Mm Thick Frameless Toughened Glass Door Shutter Of Approved Brand And Manufacture, Including Providing And Fixing Top & Bottom Pivot & Double Acting Hydraulic Floor Spring Type Fixing Arrangement And Making Necessary Holes Etc. For Fixing Required Door Fittings, All Complete As Per Direction Of Engineer-In-Charge ( Door Handle, Lock And Stopper Etc To Be Paid Separately) 37 Providing And Fixing Ss H Handle Having Min 45 Cm Length In Toughed Glass Door Including All Necessary Screws Etc. Complete. 38 Providing And Fixing 3M Fasara Frosted Etching Film Of Thickness 25 Microns Self- Adhesive Of Approved Colour, Shade, And Quality With Cutting As Per Approved Design And Pattern, Including Cleaning Of Glass And Making Surface Smooth For Fixing Of Film To The Surface, All Completed As Per The Direction Of The Engineer In Charge. 39 Providing And Fixing Of Glass Door Ss Patch Lock With Out Handle In Toughened Glass Door Including All Necessary Screws Etc. Complete 40 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is : 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing /Paneling, C.P. Brass/ Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge.(Glazing, Paneling And Dash Fasteners To Be Paid For Separately):For Fixed Portionpowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 41 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/ Neoprene Gasket Required (Fittings Shall Be Paid For Separately)Anodised Aluminium ( Anodised Transparent Or Dyed To Required Shade According To Is : 1868, Minimum Anodic Coating Of Grade Ac 15) 42 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is : 12823 Grade I Type Ii, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer - In- Charge.Pre- Laminated Particle Board With Decorative Lamination On Both Sides 43 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item):With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) 44 Filling The Gap In Between Aluminium/ Stone/ Wood Frame And Adjacent Rcc/ Brick/ Stone/ Wood/ Ceramic/ Gypsum Work By Providing Weather/Structural Non Sag Elastomeric Pu Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete,Complying To Astm C920, Din 18540-F & Iso 11600Upto 5 Mm Depth And 5 Mm Width 45 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 46 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Single Rubber Stopper 47 Providing And Fixing Bright Finished 100 Mm Mortice Lock With 6 Levers Without Pair Of Handles Of Approved Quality For Aluminium Door, With Necessary Screws Etc Complete As Per Direction Of Engineer- In- Charge. 48 Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm), With Necessary Accessories And Screws Etc. Complete. 49 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:300X10 Mm 50 Vinyl Transparent Vision Glass Stickers: Supply And Pasting Of Vinyl Transparent Vision Glass Stickers In Approved Size And Design In Glass Partition And Door As Per The Instruction Of Engineer In Charge. 51 Backlit Acrilic Board With Projected Letters: Supply, Installation, Testing And Over Suitable Welded And Painted 25X25X3Mm Ms Angle Frame In Suitable Location And In Proper Line And Level With All Necessary Fastners, Supports Etc. Electrical Works Likes Electrical Wirings, Connections, Fittings, Externaly Fixed Weather Proof 2/3 Pin Plug Points And Sockets Including Boxes Etc. To Be Complete Properly. All Fabrication And Fixing Should Be Done As Per Approved Design And Instructions Of Engineer In Charge. (Note: Only Front Elevation Will Be Measured.) 52 Furniture 53 Supply And Erection Of Airport Type 3 Seater Waiting Chair With Powder Coated Chromium Finish Having Minimum Dimensions 1675Mm Length X 710Mm Width X 775Mm Total Height And 400Mm Seat Height . Seat: High Quality Cold Rolled 1.2Mm Thick Steel Perforated Sheet Pressed And Welded To Form The Shape. Arm & Leg: High Quality 1.2Mm Thick Ms Tube / Sheet . Cross Bar: High Quality Cold Rolled 2Mm Thick Steel Sheet Pressed And Welded To Form The Shape. 54 Supply Of Phlebotomy Chair With Optimum Design Made Up Of Ms Power Coated Frame And Up Upholstery Type Seat,Back Rest And Arm Rests.Both Side Arm Rest Should Be With Height And Position Adjustable System And All As Per The Instruction Of Engineer In Charge. 55 L-Type Workstation Of Overall Size (1350 * 600)Mm + (1000 * 450)Mm X 750 Mm (L X D X H) And Pedestal Unit Made Up Of 18 Mm Thick Exterior Grade-I Mdf Board On All Sides Conforming To Is:14587 From Approved Makes Such As Century/Greenply/Fineply Or Equivalent With Decorative Laminate On Both Side And All Edges To Be Fixed With 2Mm Thick Pvc Edge Beading. One Three-Drawer Modular Pedestal Unit Of Minimum Size 450 Mm (W) X 500 Mm (D) X 650 Mm (H) All With Retractable Key Board Tray, Drawer Channels, Hinges, Handles, Individual Locking System, And All Necessary Fittings And The Workstation Should Have An Electrical Flip Box With 2 Nos Universal Power Socket & 1 No Data Socket Etc And Cable Management Tray. All Work As Per The Approved Design And Instruction Of The Engineer-In-Charge/Architect. 56 Providing And Erection Of Reception Counter Table Of Length 1200 Mm And First Level Should Be Provided At A Height Of 750 Mm And Width 600 Mm And The Second Level At A Height Of 1050Mm From Base With A Width Of 300. The Table Made Of 18Mm Thick Pre Laminated Medium Density Board Of Exterior Grade (Grade I) Is: 14587:1998 With Decorative Laminated Finish On Both Sides And 2 Mm Thick Pvc Beading On All Edges, Including Electrical Flip Box, Cable Measurement Tray, Grommets With 3 Nos Universal Power Socket And Ethernet Port, Three Drawer Pedestal Unit With Drawer Channel, Handles, Hinges, Lock All Complete As Per Approved Drawing And Installation Of Engineer In Charge/Architect. 57 Supply And Installation Of Visitors Chair Medium Back, Mesh Back Cushion Seat With Fixed Supports Made Of 304 Stainless Steel/ Powder Coated Ms Of Approved Colour Or Shade As Per The Instruction Of The Engineer In Charge 58 Revolving Chair: Medium Back Ergonomic Chair With Five Nos. Star Shaped Nylon Base. Castor: 50Mm Diameter Nylon Twin Wheel, Gas Lift Height Adjustment, Back Angle Adjustment , Fixed Armrest Providing Natural Resting For Arms. Seat With Pu Coated Foam Backed Fabric, Back Rest With Mesh Type Fabric, Upholstery: Heavy Duty Rubber Backed Fabric In Black 59 Counter Height Stools :Supply And Erection Of Counter Height Stools ( Bar Stools ) Of Following Specifications : Revolving Adjustable Chrome Plated Steel Body Chairs With Resistance To The Corrosion. Cushion Seat With Lift Mechanism For Adjustment Of Height. Minimum Height 750Mm Before Expansion. Medium Back Rest And Arm Rest. Item Shall Be Of Reputed Make. 60 Supplying And Fixing Of Lab Work Table With 18 Mm Thick Edge Moulded Granite Top Supported Over 18Mm Thick Marine Ply Wood Of 2500Mm,L X 1200Mm,W X 850Mm, H And Powder Coated Gi Frame Of Section Size Not Less Than 50X50X1.5 Mm Including And Providing 4 Nos Under Storage Movable Cabinents Of Size 600Mm,L X 450Mm,D X 750 Mm,H And Powder Coated Steel Sheet Of Thickness Not Less Than 1Mm With 1 Drawer And Partition Bottom Storage Space With Door Including Drawer Channels, Individual Locks And Handles All As Per The Approved Drawing And Instructions Of Engineer In Charge 61 Lab Work Bench -The Work Bench Top Made Up Of 18Mm Thick Granite Top Edge Moulded Over 18 Mm Thick Marine Plywood And Gi Powder Coated Frame Work Of Section Size Not Less Than 50X50X1.5Mm. The Width Of The Table Shall Be 750Mm And Height Shall Be 850Mm. The Frame Provided With Level Adjusting Screws Fixing Accessories ,Carriage Of Material All Complete As Per The Approved Drawings And Direction Of Engineer In Charge.Note Only Length Of The Table Shall Be Measured For Making Payment. 62 Cabinet/Wardrobe: Providing And Errection Of Cabinet/Wardrobe Unit Made With 18 Mm Thick Prelaminated Mdf Board Of One Side Decorative Lamination And Other Side Balancing Lamination Having Total Unit Dimension Of 900Mm,L X 450Mm,Dx 2400Mm,H And All Edges To Be Sealed With Pvc Edge Beeding Of 2.00 Mm Thick Including All Fittings Such As Autoclose Hinges,Chromium Plated Brass Individual Locks & Handles ,Tower Bolts Etc All Required. All Shelves To Be Fix With Proper Support And Bracket Holders At A Spacing Of 400 Mm Centre To Centre And All As Per The Drawings And Instruction Of Engineer In Charge. Board Make : Greenlam/ Merino / Century/ Equivalent . Only Front Elevation Will Be Measured. 63 Overhead Storage: - Providing And Fixing Overhead Storage Unit With Minimum 18 Mm Thick Pre-Laminated Medium Density Fiber Board Exterior Grade (Grade-I) Is: 14587:1998 Marked With One Side Decorative And Other Side Balancing Lamination. Cupboard Shutters Edge To Be Sealed With Pvc Edge Bending Tape 2.00 Mm Thick Of Approved Brand Including Isi Marked Nickel Plated Bright Finishing M.S. Piano Hinges Conforming To Is:3818 Marked With Fixing Chromium Plated Brass 50 Mm Cupboard Or Wardrobe Knobs, Special Quality Chromium Plated Brass Cupboard Locks With Six Levers Of Approved Quality Including Necessary Screws Etc. Complete. Only Front Elevation Will Be Measured. 64 Electrical- Wiring 65 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required.Group C 66 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Offrls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessedmedium Class Pvc Conduit As Required2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 67 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Offrls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessedmedium Class Pvc Conduit As Required2X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire 68 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Offrls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessedmedium Class Pvc Conduit As Required2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire 69 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required2 X 6 Sq.Mm + 1 X 6 Sq.Mm Earth Wire 70 Fixtures 71 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front Onsurface Or In Recess, Including Providing And Fixing 3 Pin 5/6 Amps Modular Socketoutlet And 5/6 Amps Modular Switch, Connection Etc. As Required. (For Light Plugs To Beused In Non Residential Buildings) 72 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front Onsurface Or In Recess, Including Providing And Fixing 6 Pin 5/6 & 15/16 Ampsmodular Socket Outlet And 15/16 Amps Modular Switch, Connection Etc. As Required 73 Supplying & Fixing Suitable Size Gl Box Wih Modular Plate And Cover In Front Onsurface Or In Recess Including Providing And Fixing 25 A Modular Socket Outlet And 25A Modular Sp Mcb, C Curve Including Connections, Painting Etc. Asrequired. 74 Supply, Installation Of Surface Mounted Led Tubelight. The Luminaire Should Have Cri 80 And Cct Of Both 6500K/5700K. The Luminaire Shall Be Compliant With Ip20 And Ik02 Classification. Luminaire Shall Be Designed To Emit At Least 3600Nominal Lumens And Efficacy Of Atleast 105 Lumen/Watt And Minimum System Wattageof 30 Watts. The Luminaire Shall Be Designed So As To Ensure Lumen Depreciation Of Upto 30% Over 25K Burning Hours. The Electronic Driver Used Shall Have A Power Factor 0.95 And Thd. Make - Philips, Crompton, Wipro, Havells 75 Supply And Installation Of Surface/Recess Mounted Led Round/Square Luminaire With Crca Housing Suitable With Fully Diffused Diffuser For General Lighting In Offic Eareas. The Luminaire Should Have Cri 80 And Cct Of Both 6500K/5700K, Cool White Light. The Luminaire Shall Be Compliant With Ip20 And Ik02 Classification.Luminaire Shall Be Designed To Emit At Least 1000 Nominal Lumens And Efficacy Ofatleast 105 Lumen/Watt And Minimum System Wattage Of 10 -15 Watts. The Luminaire Shall Be Designed So As To Ensure Lumen Depreciation Of Up To 30% Over 50K Burning Hours. The Electronic Driver Used Shall Have A Power Factor 0.95 And Thd. For Light Fittings To Be Installed In False Ceiling, All Required Cuttings Shall Be Made And Damages Shall Be Made Good As Per The Direction Of Engineer In Charge. Make-Philips, Crompton, Wipro 76 Supply, Conveyance, Installation, Testing And Commissioning Of Ceiling Fans Of The Following Sizes Using Standard Accessories Excluding Resistance Type Regulator, Wiring The Down Rod With Pvc Insulated And Pvc Sheathed 650/1100V Grade 3 Core Round Copper Conductor Flex Wire Or With Extended Original Wiring Etc. As Required. 1200Mm Sweep - 5 Star Rated, 3 Blade Ceiling Fan Complete With 300Mm Down Rod, Canopies,Shackles. 77 Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existingmodular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 78 Supplying, Conveyance And Installation Of 3 Blade, 400 Mm Sweep, 1400 Rpm Wall Mount Fan Including Frames And All Mounting Accessories Complete. Recommended Make: Usha/ Havells/ Bajaj / Almonard Or Equivalent 79 Supplying, Conveyance And Installation Of 150 Mm Sweep,1800 Rpm Exhaust Fanincluding Frames And Allmounting Accessories Complete. Recommended Make: Usha/Havells/Bajaj Or Equivalent 80 Supplying And Fixing 3 Pin, 5 Amp Ceiling Rose On The Existing Junction Box/ Wooden Block Including Connection Etc As Required. 81 Supplying And Fixing Brass Batten/ Angle Holder Including Connection Etc. As Required. 82 Supply, Installation Of 12 Watt Led Bulb. 83 Db And Switchgear 84 Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall , Making Good The Damages, Colour Washing Etc. As Required6 Way (8+18) - Double Cover Tpn Vertical Db With Provision For Fixing 4P Mcb / Isolator/ Rccb/ Rcbo As Incomer And Sp/ Tp Mcb As Outgoing (Ip 42/43) 85 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) 16 Way, Double Door 86 Supplying And Fixing 5A To 32 A Rating, 240/415 Volts, 10 Ka, \\C\\ Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole 87 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 88 Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps 89 Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existingmcb Db Complete With Connections, Testing And Commissioning Etc. As Required.63Amps 90 Supplying And Fixing Following Rating, Four Pole, (Three Phase And Neutral), 415Volts, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30Milli Amperes In The Existing Mcb Db Complete With Connections, Testing Andcommissioning Etc. As Required.63 Amps 91 Supplying And Fixing Cable End Boxes (Ip 43) Suitable For Following Single Poleand Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess,Complete With Testing And Commissioning Etc. As Required.For 6 Way, Double Door Spn Mcbdb 92 Cctv And Networking 93 Supply, Conveyance And Installing Of 2Mp Ip Dome/Bullet Camera Having 1/3Progressive Scan True Day And Night Colour Ir Camera Having Effective Pixel Of 2Mp, Video Frame Rate Of 2Mp @30Fps, Minimum Illumination Of 0.01 [email protected], 0Lux@Ir On, 20 M Ir Range, 24 Ir Led, Awb, Agc, Blc, 2D Noise Reduction,With 3.6Mm Board Lense, 12 Vdc, Poe Ip67 Rated Weatherproof Performance. 1 Year Warranty. Make: Bosch/Cp Plus/Honeywell Or Equivalent 94 Supply, Installation And Integration Of 8 Channel Embedded Linux Poe, Nvr (Network Video Recorder), Having Dual Core Embedded Processor, Must Connect 8 Channel Ip Cameras , Should Support Min 2 Sata Hdd Each Of 6Tb And Must Recordvideo Simultaneously, (Recording Type: Continuous, Motion Detection, Alarm, Smartevent, Event Motion Detection, Alarm, Smart Event), Video Compression H.265(Hevc)/H.264+/H.264, 2 Year Warranty, Image Quality Should Be Maintainedthroughout The Warranty Period. Make: Bosch/Cp Plus/Honeywell Or Equivalent 95 Supply And Installation Of Network Switch. 8 Port Poe Switch 1000Base-T Copper Ethernet Poe+ Connections, 10M/100M/1G Rj-45 Copper Ports, 1000Base-X Fiber Sfp Ports, 8 Port Auto Sensing 10/100/1000 Mbps Poe, Minimum Cpu Memory 512 Mb With 2 Sfp/Combo Ports, Energy Efficient Ethernet (Ieee 802.3Az). Make: Cisco/Cp Plus/ Netgear Or Equivalent 96 Supply And Fixing Of 6U Wall Mounting Rack With Supply And Fixing Of Mounting Brackets For Support Lockable Front Door And Detachable Side Doors, Cable Manager And Pdu Of 4 Or 6 Sockets Including Cooling Fan With Accessories Complete 97 Supply And Installation Of 8Tb Hard Disk 98 Supply And Installation Of Led Color Monitor Of Minimum 32 Inch Screen, Complete,Uhd Display Make: Lg/Samsung/Panasonic Or Equivalent. 99 Supplying And Drawn Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface/Recessed Steel/Pvc Conduit As Required1 Run Of Cable 100 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/ Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.25 Mm 101 Supplying And Fixing Rj45 Outlet Including Cover Plate, Keystone Jack And Gang Box Supporting, Connection Etc. As Required 102 Air Conditioning System 103 Supply, Installation, Testing And Commissioning Of Split Air Conditioner Of Followingcapacity And Specifications: Consisting Of High Wall-Mounted Type Room Unit (Fan Coil) With Cordless Remote Control And One Number Outdoor Condensing Unit Comprising Of Energy-Efficient Suitable Rotary Compressor For Operation On Single Phase, 230 V, 50Hz Supply, Fixing The Outdoor Unit On A Raised Platform As Per Manufacturers Recommendation And Fixing Of Room (Fan Coil) Unit On Wall, Standard 4M Distance Refrigerant Copper Piping With 13Mm Nitrile Rubber Insulation, Providing And Making Interconnection Between Room & Condenser As Per Site Conditions, Comprising Of 1Inch Dia Drain Pvc Pipe With Insulation Up To 4 M, Canvas Connections, Full Electrical Cabling From Power Plug Near Indoor Unit And To Outdoor Unit, Odu Ms Stand, First Charge Refrigerant Gas, Suitable Stabilizer Etc Complete As Required. (Make: Voltas, Blue Star, Hitachi, Carrier Or Equivalent). 2 Tr 3 Star Rated (Inverter Type Ac) As Per Bee 104 Supply, Installation, Testing And Commissioning Of Split Air Conditioner Of Following Capacity And Specifications: Consisting Of High Wall-Mounted Type Room Unit (Fan Coil) With Cordless Remote Control And One Number Outdoor Condensing Unit Comprising Of Energy-Efficient Suitable Rotary Compressor For Operation On Singlephase, 230 V, 50Hz Supply, Fixing The Outdoor Unit On A Raised Platform As Per Manufacturers Recommendation And Fixing Of Room (Fan Coil) Unit On Wall, Standard 4 M Distance Refrigerant Copper Piping With 13Mm Nitrile Rubber Insulation, Providing And Making Interconnection Between Room & Condenser As Per Site Conditions, Comprising Of 1Inch Dia Drain Pvc Pipe With Insulation Up To 4 M, Canvas Connections, Full Electrical Cabling From Power Plug Near Indoor Unit And To Outdoor Unit, Odu Ms Stand, First Charge Refrigerant Gas, Suitable Stabilizer Etc Complete As Required. (Make: Voltas, Blue Star, Hitachi, Carrier Or Equivalent). 1.5 Tr 3 Star Rated (Inverter Type Ac) As Per Bee 105 Supply And Installation Of Additional Copper Piping, Cabling From Indoor To Outdoor And Drain Piping For Air Conditioning Unit With Proper Insulation Including All Required On Wall/Above False Ceiling Complete 106 Supply, Installation, Testing And Commissioning Of True On-Line Double Conversion 6 Kva Ups System With 1:1 Crest Factor Single Phase Phase Input – Singlephase Output. Inversion Shall Be Microprocessor Controlled With Instantaneous Sine Wave Control Using Igbt. Ups Shall Have Standard Display Features, Alarms, Safeties, Etc Input Voltage Range : A) Phase & Single Phase With Ground B)Votage Range 190 Vac & 250 Vac C)Input Frequency : 50/60 Hz D)Power Factor : 0.95 Or Above E)Thd : Less Than 5% With Full Load Bypass F) Voltage Range & 200Vac & 240 Vac G) Frequency Range – 45-55 Hz/55-65 Hz Output Voltage Range H)Voltage Range & 200Vac & 240 Vac I)Frequency Range & 50/60 Hz J)Voltage Distortion & Linear Load = 2% K)Voltage Distortion – Nonlinear Load = 5% L)Output Waveform – Pure Sinewave M) Minimum Back Up Time : Continuous 60 Minutes At Full Load Rectifier Shall Be Full Wave Type (Shall Fully Meet The Specified Input Power Requirements) Battery Type: Sealed Lead Acid Maintenance Free Dc Voltage : 24/48/96V Dc System, Battery Nos And Capacity Shall Be Designed For Optimum Storage Space. Make: Liebert Vertiv/Apc By Schneider/Numeric By Legrand 107 Visi Cooler And Refrigerator 108 Supply And Installation Of 260 Litre Refrigerator, Direct-Cool Model With A Minimum 3-Star Bee Rating And Stabilizer-Free Operation. It Shall Use Eco-Friendly Refrigerant (R600A) And Have A High-Efficiency, Low-Noise Compressor. The Unit Shall Include Toughened Glass Shelves, A Vegetable Crisper, Bottle Storage For 2L Bottles, An Internal Freezer Compartment, And A Removable Anti-Bacterial Gasket. It Shall Operate On 230V, 50Hz Ac And Include Standard Accessories Such As An Ice Tray And Egg Tray. The Refrigerator Shall Have 1-Year Comprehensive Warranty And 10-Year Compressor Warranty, With Bis Certification.
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 3
27.
Tourism #11320518 Technical Bid
Tender For Tourism Development Work Of Shri Ramjanaki Temple, Kotawari In Shahjahanpur District.-1 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge. All Kinds Of Soil Dsr-2.6.1 170.25 Cum 133.12 127.80 21757.52 In All Kind Of Soil Upto 1.5M To 3.0M. Depth 2.6.1+2.26.1 18.74 Cum 228.22 219.09 4106.24 In All Kind Of Soil Upto 3.0M To 4.5M. Depth 2.6.1+(2.26.1* 2) 6.37 Cum 323.31 310.38 1977.88 2 Excavation Of Foundation In Ordinary Soil (Loam Clay Or Sand) Including Lift Upto 1.50 Meter And Lead Upto 30 Meter And Including Filling, Watering And Ramming Of Excavated Earth Into The Trenches Or Into The Space Between The Building And Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Sur-Plus Earth As Directed By The Engineer Incharge Up To A Distance Of 30 Meters From The Foundation Trenches. Dsr-2.1.1 35.61 Cum 97.38 93.49 3329.14 3 Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 And For All Lift. Dsr-2.25 8.70 Cum 147.00 141.12 1227.84 4 Excavating, Supplying And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete Dsr-2.25(A) 55.60 Cum 525.36 504.34 28041.40 5 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) Dsr-4.1.8 70.78 Cum 5108.83 4904.47 347162.56 6 Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. Dsr-2.27 26.31 Cum 1592.76 1529.05 40229.27 7 Diluting And Injecting Chemical Emulsion For Postonstructional Anti-Termite Treatment (Excluding The Cost Of Chemical Emulsion) : Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 20% With 1% Concentration Dsr-2.35.3.1 194.47 Sqm 232.53 223.23 43411.24 8 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). Dsr-5.3 82.66 Cum 8628.83 8283.68 684729.10 9 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size De Rived From Natural Sources) Footing Dsr-5.1.2 21.98 Cum 6784.08 6512.72 143149.60 10 Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Dsr-5.2.2 22.97 Cum 8139.44 7813.86 179484.39 Abstract Of Cost Delhi Schedule Of Rate Effective From 12/07/2023 X (0.735X106/107X1.03) Has Been Followed. Proposed Tourism Development Of Ramjanki Temple At Kotawari, Tilhar, Sahjahanpur, U.P. 11 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers Dsr-5.9.5 257.49 Sqm 552.28 530.19 136518.66 12 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Suspended Floors, Roofs, Landings, Balconies And Access Platform Dsr-5.9.3 407.10 Sqm 695.41 667.60 271778.96 13 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete Dsr-5.9.1 63.96 Sqm 294.10 282.34 18058.37 14 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Columns, Pillars, Piers, Abutments, Posts And Struts Dsr-5.9.6 208.86 Sqm 720.95 692.11 144554.66 15 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Dsr-6.1.1 16.84 Cum 5527.80 5306.69 89341.45 16 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Dsr-6.1.2 51.30 Cum 5349.01 5135.05 263427.92 17 Providing And Laying Damp-Proof Course 50Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 20Mm Nominal Size Derived From Natural Sources). Dsr-4.11 2.14 Sqm 371.80 356.93 763.83 18 Providing & Applying A Coat Of Residual Petroleum Bitumen Of Grade Of Vg-10 Of Approved Quality Using 1.7Kg Per Square Metre On Damp Proof Course After Cleaning The Surface With Brushes And Finally With A Piece Of Cloth Lightly Soaked In Kerosene Oil. Dsr-4.13 44.55 Sqm 109.61 105.22 4687.75 19 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Dsr-6.4.2 80.04 Cum 6829.23 6556.06 524747.32 20 Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) Dsr-6.13.2 60.18 Sqm 842.82 809.11 48692.17 21 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More Dsr-5.22A.6 186.64 Qtl 8088.48 7764.94 1449250.34 22 15 Mm Cement Plaster On Plinth Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Coarse Sand) Dsr-13.5.1 65.74 Sqm 308.80 296.45 19488.62 23 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix: 1:6 (1 Cement: 6 Coarse Sand) Dsr-13.5.2 252.10 Sqm 296.50 284.64 71758.35 24 12 Mm Cement Plaster Of Mix : 1:6 (1 Cement: 6 Coarse Sand) Dsr-13.4.2 609.85 Sqm 257.73 247.42 150888.63 25 Add For Plaster Drip Course/ Groove In Plastered Surface Or Moulding To R.C.C. Projections. Dsr-5.30 315.01 Rm 58.80 56.45 17781.09 26 Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Finished With A Floating Coat Of Neat Cement, Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate Dsr-11.3.1 29.40 Sqm 460.63 442.21 13000.95 27 Cement Plaster Skirting Up To 30 Cm Height, With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Finished With A Floating Coat Of Neat Cement.18 Mm Thick Dsr-11.6.1 3.35 Sqm 496.52 476.66 1596.81 26 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm Dsr-11.41.2 137.75 Sqm 1165.05 1118.45 154065.99 27 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To |.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm Dsr-11.46.2 10.17 Sqm 1217.25 1168.56 11884.22 28 Providing And Fixing 1St Quality Ceramic Glazed Floor Tiles Conforming To Is : 15622 (Thickness To Be Specified By The Manufacturer ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Dsr-11.37A 148.53 Sqm 812.00 779.52 115781.77 29 Providing And Laying Rectified Glazed Ceramic Floor Tiles Of Size 300X300 Mm Or More (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In Colours White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Dsr-11.39 4.40 Sqm 997.47 957.57 4213.30 30 Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Ordinary Cement Without Any Pigment 11.20.4 6.12 Sqm 792.24 760.55 4654.54 31 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors,Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note: Butt Hinges And Necessary Screws Shall Be Paid Separately) 35 Mm Thick Dsr-9.5.1.1 6.30 Sqm 3083.86 2960.50 18651.18 32 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors,Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note: Butt Hinges And Necessary Screws Shall Be Paid Separately) 30 Mm Thick Dsr-9.5.1.2 83.22 Sqm 2810.38 2697.97 224524.67 33 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws Dsr-9.21.1 15.33 Sqm 1794.43 1722.65 26408.23 34 Providing 40X5 Mm Flat Iron Hold Fast 40 Cm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 30X10X15Cm 1:3:6 Mix (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size). Dsr-9.53 128.00 Nos 171.63 164.77 21090.11 35 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding Dsr-9.48.1 937.05 Kg 164.32 157.75 147816.54 36 Providing And Fixing T-Iron Frames For Doors, Windows And Ventilators Of Mild Steel Tee-Sections, Joints Mitred And Welded, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10X10 Cm Of C.C. 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size). Dsr-10.13.1 100.80 Kg 106.27 102.02 10283.67 37 Providing And Fixing Angle Iron Frames For Doors, Windows And Ventilators Of Mild Steel Angle Sections Of Size 35X35X5 Mm, Joints Mitred And Welded By Angle Iron 35X35X5 Mm Or 35X 5 Mm Flat Pieces To The Existing T-Iron Frame Or To The Wall With Dash Fastener, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer, All Complete As Per The Direction Of Engineer-In-Charge. Dsr-10.31 125.00 Kg 97.87 93.96 11744.60 38 Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-Incharge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). Dsr 10.28 133.33 Kg 579.28 556.11 74146.05 39 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately).(Sal Wood) Dsr-9.1.2 1.61 Cum 87387.28 83891.79 135065.79 40 Fixing Of Door, Windows/Ventilators Chaukhats In Position. (A) Door Chaukhats Above 1.5 Sqm To 5.0Sqm Mr 19.00 Nos 150.00 144.00 2736.00 (B) Window Chaukhats Above 1.5 Sqm 12.00 Nos 100.00 96.00 1152.00 (C) Ventilator Chaukhats 7.00 Nos 50.00 48.00 336.00 41 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade: New Work (Two Or More Coats Applied @ 1.43 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) Dsr-13.47.1 407.00 Sqm 128.32 123.19 50137.46 42 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Dsr-13.41.1 434.15 Sqm 139.23 133.66 58030.01 43 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. Dsr-13.80 841.15 Sqm 117.03 112.35 94505.07 44 Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete :250X16 Mm Dsr-9.62.2 11.00 Nos 145.27 139.46 1534.05 45 Providing And Fixing Isi Marked Oxidised M.S. Tower Bolt Black Finish, (Barrel Type) With Necessary Screws Etc. Complete : 250X10 Mm Dsr-9.63.1 21.00 Nos 62.92 60.41 1268.53 200X10 Mm Dsr-9.63.2 65.00 Nos 52.05 49.97 3247.81 46 Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete :100 Mm Dsr-9.66.2 54.00 Nos 24.41 23.44 1265.50 47 Providing And Fixing Bright Finished Brass Hanging Type Floor Door Stopper With Necessary Screws, Etc. Complete Dsr-9.82 1.00 Nos 91.23 87.59 87.59 48 Providing And Laying Integral Cement Based Water Proofing Treatment Including Preparation Of Surface As Required For Treatment Of Roofs, Balconies, Terraces Etc Consisting Of Following Operations: (A) Applying A Slurry Coat Of Neat Cement Using 2.75 Kg/Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is. 2645 And Approved By Engineer-In-Charge Over The Rcc Slab Including Adjoining Walls Upto 300 Mm Height Including Cleaning The Surface Before Treatment. (B) Laying Brick Bats With Mortar Using Broken Bricks/Brick Bats 25 Mm To 115 Mm Size With 50% Of Cement Mortar 1:5 (1 Cement : 5 Coarse Sand) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineerin- Charge Over 20 Mm Thick Layer Of Cement Mortar Of Mix 1:5 (1 Cement :5 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineerin- Charge To Required Slope And Treating Similarly The Adjoining Walls Upto 300 Mm Height Including Rounding Of Junctions Of Walls And Slabs. (C) After Two Days Of Proper Curing Applying A Second Coat Of Cement Slurry Using 2.75 Kg/ Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge. (D) Finishing The Surface With 20 Mm Thick Jointless Cement Mortar Of Mix 1:4 (1 Cement :4 Coarse Sand) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge Including Laying Glass Fibre Cloth Of Approved Quality In Top Layer Of Plaster And Finally Finishing The Surface With Trowel With Neat Cement Slurry And Making Pattern Of 300X300 Mm Square 3 Mm Deep. (E) The Whole Terrace So Finished Shall Be Flooded With Water For A Minimum Period Of Two Weeks For Curing And For Final Test.“All Above Operations To Be Done In Order And As Directed And Specified By The Engineer-In-Charge : With Average Thickness Of 120 Mm And Minimum Thickness At Khurra As 65 Mm Dsr-22.7.1 198.55 Sqm 1263.41 1212.87 240815.58 49 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture Dsr-13.48.3 144.65 Sqm 128.02 122.90 17777.47 50 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture Dsr-13.48.2 209.70 Sqm 132.18 126.90 26610.03 51 Providing & Fixing Panes Of Glass With Equal Or Equivalent I.S.I Marked Quality Putty. Brads And Springs And Including Supply Of All Materials And Labour Etc Complete . 3.8 To 4.7 Mm Thick Dsr-10.30.1 44.76 Sqm 805.96 773.72 34631.80 52 Supply And Fixing Of Drop Down Rail / Grab Bars Mr 4.00 Nos. 4400.00 4224.00 16896.00 53 Providing, Driving With Hydraulic Piling Rigs With Power Units And Installing Driven Cast-In-Situ Reinforced Cement Concrete Piles Of Grade M-25 Of Specified Diameter And Length Below The Pile Cap, To Carry Safe Working Load Not Less Than Specified, Excluding The Cost Of Steel Reinforcement But Including The Cost Of Shoe And The Length Of Pile To Be Embedded In The Pile Cap Etc. All Complete. (Length Of Pile For Payment Shall Be Measured From Top Of Shoe To The Bottom Of Pile Cap) : 400 Mm Dia Piles Dsr-20.1.1 48.00 Rm 2075.18 1992.17 95624.30 54 Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) : 30 Mm Thick Dsr-8.14.1.5 50.74 Sqm 3971.79 3812.92 193478.98 55 Stone Work In Plain Ashlar In Super Structure Upto Floor Five Level In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Including Pointing With Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade Both Face Dressed Red Sand Stone Dsr-7.12.1.1 3.56 Cum 51218.78 49170.03 175241.97 56 Extra For Stone Work Ashlar Sunk Or Moulded Or Sunk And Moulded Or Carved In : Triangular Or Square Or Rectangular Pillars Dsr-7.21.1 3.56 Cum 2834.15 2720.79 9696.89 57 Providing And Fixing Stainless Steel Cramps Of Required Size And Shape For Anchoring Stone Wall Lining To The Backing Or Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 (1 Cement : 2 Coarse Sand), Including Making The Necessary Chases In Stone And Holes In Walls Wherever Required. Dsr-8.15 99.58 Kg. 535.78 514.35 51219.04 58 Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) :Red Sand Stone - Exposed Face Machine Cut And Table Rubbed With Rough Backing. 50Mm Dsr 8.14.1.3 37.80 Sqm. 4342.28 4168.59 157572.62 59 Providing And Fixing Copper Pins 7.5 Cm Long 6 Mm Diameter For Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 (1 Cement : 2 Coarse Sand), Including Making The Necessary Chases. Dsr 8.16 30.00 Nos. 32.92 31.61 948.21 60 Providing And Fixing Stone Jali 40 Mm Thick Throughout In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment, Matching The Stone Shade, Jali Slab Without Any Chamfers Etc. Red Sand Stone Dsr 7.33.1 4.50 Sqm. 11198.29 10750.35 48376.59 61 Stone Work, Plain In Copings, Cornices, String Courses And Plinth Courses, Upto 75 Mm Thick In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand), Including Pointing With White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade.: Red Sand Stone Dsr 7.32.1 0.47 Cum. 70303.46 67491.32 31720.92 62 Carving & Engraving Work On Red Sand Stone (Labour Only) M.R. 9.73 Sqm. 15615.00 14990.40 145856.59 63 Manufacturing, Supplying And Fixing Retro Reflective Overhead Signage Boards Made Up Of 2 Mm Thick Aluminium Sheet, Face To Be Fully Covered With High Intensity And Encapsulated Lens Type Heat Activated Retro Reflective Sheeting Conforming To Type - Iii Of Astm-D-4956-01 As Approved By Engineer-In-Charge, Letters, Borders Etc. As Per Irc : 67-2001 In Silver White With Blue Colour Back Ground And With High Intensity Grade, Pasted On Substrate By Pressure Sensitive Adhesive Backing Which Shall Be Activated By Applying Pressure Conforming To Class Ii Of Astm-D-4956-01 And Fixing The Same To The Plate Of Structural Frame Work By Means Of Suitable Sized Aluminium Alloys, Rivets Or Bolts & Nuts @ 300 Mm Centre To Centre All Along The Periphery As Well As In Two Vertical Rows Along With Theft Resistant Measures, Including The Cost Of Painting With Two Or More Coats Of Epoxy Paint In Grey Colour On The Back Side Of Aluminium Sheet Including Appropriate Priming Coat. The Rate Includes The Cost Of Rounding Off The Corners, Lowering Down The Structural Frame Work From The Gantry, Fixing And Erecting The Same In Position All Complete As Per Drawings, Specification And Direction Of The Engineerincharge.( Structural Frame Work Including M.S. Plate To Be Provided Separately. Rectangular Area Of The Sheet Only Shall Be Measured For Payment). Overhead Informatory Road Signage Dsr 16.60.1 8.64 Sqm. 4409.78 4233.39 36576.45 64 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Dsr 8.2.2.2 34.45 Sqm 3852.10 3698.01 127396.50 65 Making Plinth Protection 50 Mm Thick Of Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Over 75 Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation, Levelling & Dressing & Finishing The Top Smooth. Dsr-4.17 6.00 Sqm 561.96 539.48 3236.87 66 Providing And Laying Factory Made Chamfered Edge Cement Concrete Paver Blocks In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc, Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over 50 Mm Thick Compacted Bed Of Sand, Compacting And Proper Embedding/Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand. Complete All As Per Direction Of Engineer-In-Charge.80 Mm Thick C.C. Paver Block Of M-35 Grade With Approved Colour Design And Pattern Dsr-16.91.2 207.07 Sqm 818.60 785.85 162723.31 1 Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fitting And Fixtures Completed Including Cutting And Making Good The Walls And Floors Wherever Required.White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests 17.1.1 2.00 Nos. 5075.38 4872.36 9744.73 2 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Isi Marked White Solid Plastic Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete Including Cutting And Making Good The Walls And Floors Wherever Required. W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 17.2.1 3.00 Nos. 4886.50 4691.04 14073.11 3 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require A) White Vitreous China Flat Back Wash Basin Size 550X 400 Mm With Single 15 Mm C.P. Brass Pillar Tap. 17.7.4 4.00 Nos. 1409.35 1352.98 5411.91 4 Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430X260X350 Mm And 340X410X265 Mm Sizes Respectively With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.I Clamps Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required A) One Urinal Basin With 5 Litre White P.V.C. Automatic Flushing Cistern 17.4.1 3.00 Nos. 4918.90 4722.14 14166.42 5 Providing And Fixing Flexible P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc Waste Fittings Complete. Flexible Pipe 17.28.2 A) 32Mm Dia 17.28.2.1 4.00 Nos. 89.66 86.07 344.29 B) 40Mm Dia 17.28.2.2 2.00 Nos. 89.66 86.07 172.15 6 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 17.31 4.00 No. 1205.92 1157.69 4630.74 7 Providing And Fixing Cp Brass Single Lever Lelephonic Wall Mixture Of Quality & Make And As Per Thedirection Of Enginer-Incharge. A) 15Mm Dia Nominal Dia. 17.22B 2.00 Each 5205.39 4997.17 9994.34 8 Providing And Fixing 8 Mm Dia C.P./S.S. Jet With Flexible Tube Upto 1 Meter Long With S.S. Triangular Plate For Eureopean Type W.C. Of Quality And Make As Approved By Engineer-In-Charge. 15Mm Nominal Bore 17.16A 2.00 Each 261.85 251.38 502.76 Sanitary Fixtures & Accessories : I 9 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fittings Arrangement Of Approved Quality And Colour. 600 Mm Long Towel Rail With Total Length Of 645 Mm, Width 78 Mm And Effective Height Of 88 Mm, Weighing Not Less Than 190 Gms. Dsr-17.73.2 1.00 Each 531.69 510.43 510.43 10 Providing And Fixing Ptmt Soap Dish Holder Having Length Of 138Mm, Breadth 102Mm, Height Of 75Mm With Concealed Fitting Arrangements, Weighing Not Less Than 106 Gms. Dsr-18.65 1.00 Each 83.58 80.24 80.24 11 Providing And Fixing C.P. Brass Ablution Health Faucet Assembly With 1.0 M Long Braided Pvc Hose With Mounting Bracket Fixed On Wall Complete.[For Ewc]-Make-Jaquar Ald565 Mr 2.00 Each 1705.00 1636.80 3273.60 12 Providing And Fixing C.P. Brass Two-Way Angle Valve For Ewc Points & For Fixing Ablution Health Faucet Of Approved Quality Conforming To Is:8931. 15 Mm Nominal Bore-Essco Sqt 526A Mr 2.00 Each 1335.00 1281.60 2563.20 1 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A Including Jointing With Seal Ring Conforming To Is : 5382 Leaving 10 Mm Gap For Thermal Expansion . (I) Single Socketed Pipes. A) 110Mm Diameter 12.41.2 31.30 Mtr 283.04 271.72 8504.80 2 Making Khurras 45X45 Cm With Average Minimum Thickness Of 5 Cm Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate Of 20 Mm Nominal Size) Over Pvc Sheet 1M X 1 M X 400 Micron, Finished With 12 Mm Cement Plaster 1:3 (1 Cement : 3 Coarse Sand) And A Coat Of Neat Cement,Punning,Rounding The Edges And Making And Finishing The Outlet Complete. A) 110Mm 12.22 7.00 Nos. 223.68 214.73 1503.13 3 Providing And Fixing Unplasticised -Pvc Pipe Clips Of Approved Design To Unplasticised - Pvc Rain Water Pipes By Means Of 50X50X50Mm Hard Wood Plugs, Screwed With M.S. Screws Of Required Length Including Cutting Brick Work And Fixing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) And Making Good The Wall Etc. Complete. A) 110Mm 12.43.2 20.00 Nos. 278.47 267.33 5346.54 4 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I)Single Socketed Pipes. 110 Mm Diameter 12.41.2 Rm. 283.04 271.72 5 Providing And Fixing To The Inlet Mouth Of Rain Water Pipe Cast Iron Grating 15 Cm Diameter And Weighing Not Less Than 440 Grams. Dsr-12.44 8.00 Nos. 41.02 39.38 315.06 6 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. A) 110Mm Dia P.V.C. Pipe Nsr 20.00 Rm. 485.00 465.60 9312.00 B) 90Mm Dia P.V.C. Pipe Nsr 25.00 Rm. 390.00 374.40 9360.00 6 Providing & Fixing Upvc Floor Trap Of Self Cleansing Design With Cp Jali Complete In All Respects. (Make : Supreme / Finolex / Prince) P-Trap Type Floor Trap 110 X 90 Mm Nsr 12.00 No. 195.00 187.20 2246.40 7 Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings/Accessories For Unplasticised Rigid Pvc Pipes Including Jointing With Seal Ring Leaving 10 Mm Gap For Thermal Expansion.. (Make : Supreme / Finolex / Prince) Door Tee 110X110X110 Mm Nsr 2.00 No. 280.00 268.80 537.60 110X110X90 Mm Nsr 2.00 No. 200.00 192.00 384.00 Bend 110 Mm Nsr 2.00 No. 170.00 163.20 326.40 Soil Waste & Vent Pipes And Fittings - Ii 90 Mm Nsr 2.00 No. 160.00 153.60 307.20 1 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge.Lls Etc. (Internal Work) I) Exposed On Wall A) 32Mm Nominal Dia Pipe 18.9.4 30.00 Rm. 328.94 315.78 9473.44 3 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings Including Fixing The Pipe With Clamps At 1.00M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Internal Work) I) Exposed On Wall A) 25Mm Dia Nominal Outer Dia Pipes 18.7.3 20.00 Rm. 301.15 289.11 5782.13 4 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testiang Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work Including Cutting Chases And Making Good The Walls Etc. A) 15Mm Dia Nominal Outer Dia Pipes 18.8.1 70.00 Rm. 373.34 358.40 25088.28 B) 20Mm Dia Nominal Outer Dia Pipes 18.8.2 20.00 Rm. 403.19 387.06 7741.18 C) 25Mm Dia Nominal Outer Dia Pipes 18.8.3 Rm. 470.42 451.60 5 Providing & Fixing G.I. Pipes Complete With G.I. Fittings & Clamps Including Cutting & Making Good The Walls Etc. (Internal Work) I) Exposed On Wall A) 25Mm Dia Nominal Bore (Medium Duty) Dsr-18.10.3 20.00 Rm. 413.76 397.21 7944.21 Ii) Concealed Pipe Including Painting With Anticorrosive Bitumatic Paint, Cutting Chases And Making Good The Wall. A) 15Mm Dia Nominal Bore Dsr-18.11.1 15.00 Rm. 435.32 417.91 6268.65 2 Painting G.I. Pipes And Fittings With Synthetic Enamel White Paint Over A Ready Mixed Priming Coat, Both Of Approved Quality For New Work. A) 15Mm Dia Nominal Bore. Dsr-18.38.1 15.00 Rm. 14.55 13.97 209.51 B) 25Mm Dia Nominal Bore. Dsr-18.38.3 10.00 Rm. 22.69 21.78 217.79 2 Providing And Fixing 45 Cm Long Unplasticised Pvc Connection Pipe With Brass Unions. A) 15Mm Nominal Bore Dsr18.21.2.1 4.00 Nos. 73.31 70.38 281.51 5 Providing & Fixing Cp Brass Bib Cock Of Approved Quality Conforming To Is 8931 A) 15Mm Nominal Bore 18.49.1 7.00 Nos. 380.09 364.88 2554.19 6 Providing & Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms. A) 15Mm Nominal Bore 18.51.1 7.00 Nos. 599.19 575.22 4026.57 7 Providing & Fixing C.P. Brass Angle Valve For Basin Mixer And Gyser Points Of Approved Quality Conforming To Is 8931 A) 15Mm Nominal Bore 18.53.1 14.00 Nos. 430.71 413.48 5788.75 8 Providing And Fixing Gun Metal Gate Valve With Wheel Of Approved Quality. A) 25Mm Dia Nominal Bore 18.17.1 2.00 Each 466.78 448.11 896.23 B) 32Mm Dia Nominal Bore 18.17.2 1.00 Each 517.18 496.50 496.50 C) 50Mm Dia Nominal Bore 18.17.4 Each 769.96 739.16 Water Supply Pipes And Fittings - Iii 9 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete 20Mm Dia Nominal Bore 18.18.2 1.00 Each 346.86 332.99 332.99 A) 25 Mm Nominal Bore 18.18.3 2.00 Nos. 348.03 334.10 668.21 10 Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Of Approved Brand And Manufacture With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. 18.48 A) Circular Tank 18.48 2500.00 Ltrs 8.25 7.92 19799.33 11 Providing And Fixing Stone Slab Table Rubbed, Edges Rounded And Polished Of Size 75X50Cm Deep And 1.8Cm Thick Fixed In Urinal Partitions By Cutting A Chase Of Appropriate Width With Chase Cutter And Embedding The Stone In The Chase With Epoxy Grout Or With Cement Concrete 1:2:4 (1Cement: 2Coarse Sand: 4Graded Stone Aggregate 6Mm Nominal Size) As Per Direction Of Engineerin-Charge And Finished Smooth. 8.10 Granite Stone Of Approved Shade Dsr-8.10.2 1.08 Sqm. 3038.79 2917.23 3150.61 1 Providing & Fixing Soil, Waste And Vent Pipes. A) 100Mm Dia Centrifugally Cast Iron S & S Pipe. Dsr17.35.1.2 6.00 Rm. 885.53 850.11 5100.67 2 Providing Lead Caulked Joints To Sand Cast Iron/Centrifugally Cast (Spun) Iron Pipes & Fitting Of Diameters. A) 100Mm Dsr-17.58.1 2.00 Each 466.86 448.18 896.37 3 Providing & Fixing M.S. Holder Bat Clamps Of Approved Design To Sand Cast Iron/Centrifugally Cast (Spun) Iron S & S Pipe Embeded In & Including Cement Concrete Blocks 10X10X10Cm. Of 1:2:4 Mix (1 Cement : 2 Coarse : 4 Graded Stone Aggregate 20Mm Nominal Size). Including Cost Of Cutting Holes & Making Good The Walls Etc. A) For 100Mm Dia Pipe. Dsr-17.37.1 2.00 Each 272.13 261.24 522.49 4 Providing & Fixing Cast Iron Trap Of Self Cleansing Design With Or Without Ventarm Complete, Including Cost Of Cutting & Making Good The Walls & Floors. A) 100Mm Inlet & 75Mm Outlet. Dsr17.60.2.1 1.00 No. 1481.31 1422.06 1422.06 5 Providing & Fixing Cast Iron Coller. A) 100Mm Dia. Dsr17.57.1.2 2.00 No. 384.85 369.46 738.91 6 Providing And Fixing Plain Cast Iron S & S Sanitary Bend. A) 100Mm Dsr17.39.1.2 2.00 Nos. 427.52 410.42 820.84 1 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. A) 110Mm Dia P.V.C. Pipe Mr 7.50 M 485.00 465.60 3492.00 2 Providing And Fixing Square Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber With F.P.S. Bricks Of Class Designation 75 And Water Tight C.I. Cover With Frame Of 300 X 300Mm. Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design. A) 150 X 100 Mm. Size P Type With Sewer Bricks Conforming To Is : 4885 Dsr-19.4.2.1 1.00 Nos 2050.58 1968.56 1968.56 Soil Waste & Vent Pipes And Fittings - Ii Schedule Of Quantities For Internal Sewerage System - Iv 3 Constructing Brick Masonry Manhole In Cement Mortar 1:4 (1 Cement :4 Coarse Sand) Rcc Top Slab With 1:2:4 Mix (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1:4:8 Mix (1 Cement :4 Coarse Sand :8 Graded Stone Aggregate 40Mm Nominal Size) Inside Plastering 12Mm Thick With Cement Mortar 1:3 (1 Cement :3 Coarse Sand) Finished With Floating Coat Fo Neat Cement And Making Channels In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20Mm Nminal Size) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design 19.7 Inside Size 90X80Cms And 45Cms Deep Including Ci Cover With Frame (Light Duty) 455X610Mm Internal Diamensions Total Weight Of Cover And Frame To Be Not Less Than 38 Kg (Weight Of Cover 23 Kg And Weight Of Frame 15Kg). 19.7.1 With Fps Bricks Of Class Designation 150 Dsr-19.7.1.1 1.00 Each 9577.59 9194.49 9194.49 External Sewerage Works 1 Excavating Trenches In All Kind Of Soil Of Required Width For Pipes. Including Excavation For Sockets And Dressing Of Sides, Ramming Of Bottoms, Including Getting Out The Excavated Soil & Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth Including Consolidating Each Deposited Layer By Ramming, Watering, Etc & Disposing Of Surplus Excavated Soil As Directed Within A Lead Of 50M. Up To 1.50 M Depth Pipes 80 Mm To 300 Mm Diameter 2.10.1.2 20.00 Rm 264.10 253.54 5070.79 2 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. 160Mm Dia Under Floor (For External Sewer) Nsr 20.00 Metre 1190.00 1142.40 22848.00 3 Constructing Brick Masonry Manhole With F.P.S. Bricks In Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) Rcc Top Slab With 1 : 2 : 4 Mix (1 Cement : 2 Coarse Sand : 4 Grade Stone Aggregate 20Mm Nominal Size); Foundation Concrete 1:4:8 Mix (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size) Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1Cement 3 Coarse Sand) Finished With A Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1:2:4 (1Cement : 2 Coarse Sand: 4 Graded Stone Aggregate 20 Mm Nominal Size) Finishd With A Floating Coat Of Neat Cement Complete As Per Standard Design Inside Size 90 X 80 Cm & 45 Cm Deep Including Ci Cover With Frame (Light Duty) 455 X 610 Mm Internal Dimension Total Wt. Of Cover & Frame To Be Not Less Than 38 Kg (Wt. Of Cover 23 Kg And Wt. Of Frame 15 Kg) 19.7.1.1 3.00 Nos 9577.59 9194.49 27583.46 4 Extra For Depth For Manhole With F.P.S. Bricks Size 90 X 80 Cm 19.8.1.1 0.30 Rm 6618.83 6354.07 1906.22 5 Providing M.S. Foot Rests Including Fixing In Manholes With 20*20*10 Cm Cement Concrete Blocks 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) As Per Standard Design : With 20 X 20 Mm Square Bar 19.15.1 3.00 Nos 408.51 392.17 1176.51 6 Providing And Fixing Square Mouth S.W. Gully Trap Grade `A Complete With C.I. Grating Brick Masonry Chamber With F.P.S Bricks And Water Tight Ci Cover With Frame Of 300 X 300 Mm Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design 180 X 150 Mm. Size P Type 19.4.3.1 2.00 Nos 2101.54 2017.48 4034.96 7 Making Soak Pit 2.5 M Diameter 3.0 Metre Deep With 45 X 45 Cm Dry Brick Honey Comb Shaft With Bricks And S.W. Drain Pipe 100 Mm Diameter, 1.8 M Long Complete As Per Standard Design. With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 19.32.1 1.00 Nos 20145.75 19339.92 19339.92 8 Providing M.S. Foot Rests Including Fixing In Manholes With 20X20X10 Cm Cement Concrete Blocks 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) As Per Standard Design With 20X20 Mm Square Bar Dsr-19.15.1 8.00 Nos. 408.51 392.17 3137.37 9 Providing And Fixing S.C.I. Tee 150 Mm At The Inlet And Outlet Of Septic Tank. Dsr-7087 2.00 Nos. 621.00 596.16 1192.32 10 Providing And Fixing Soil, Waste And Vent Pipes:75 Mm Diameter Sand Cast Iron S&S Pipe As Per Is: 1729 Dsr17.35.2.1 3.00 Rmt. 783.54 752.19 2256.58 11 Providing & Fixing Of 75Mm Dia Sand Cast Iron S&S As Per Is - 1729 Terminal Guard. Dsr17.56.2.1 2.00 Nos. 255.52 245.30 490.59 12 Providing & Fixing 75Mm Plane Sand Cast Iron S&S Bend Of Required Drgtee. Dsr17.39.2.1 2.00 Nos. 282.18 270.89 541.78 13 Providing Lead Caulked Joints To Sand Cast Iron/ Cetrifugally Cast (Squn) Irons Pipes & Fitting Of 50 Mm Dia Dsr-17.58.2 2.00 Nos. 394.67 378.89 757.77 14 Providing And Fixing In Position Precast Rcc Manhole Cover And Frame Of Required Shape And Approved Quality.M.D. -10- Circular Shape 500Mm Internal Diameter Dsr19.19.2.2 2.00 Nos. 879.42 844.24 1688.49 1 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable Etc. As Required Dsr 1.10.3 51.00 Each 1115.37 1070.76 54608.68 2 Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable Etc. As Required Dsr 1.11 4.00 Each 1187.60 1140.10 4560.39 3 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. Dsr 1.21.1 17.00 Metre 97.32 93.43 1588.26 4 Wiring For Circuit/ Submain Wiring Along With Earth Wire With The Following Sizes Of Frls/Hffr Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire Dsr 1.14.1 650.00 Metre 177.15 170.07 110542.86 5 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire Dsr 1.14.2 188.00 Metre 285.12 273.71 51457.72 6 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire Dsr 1.14.3 202.00 Metre 253.94 243.79 49244.67 7 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 6 Sq. Mm + 1 X 6 Sq. Mm Earth Wire Dsr 1.14.4 105.00 Metre 333.78 320.42 33644.59 8 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 6 Pin 5/6 & 15/16 A Modular Socket Outlet And 15/16 A Modular Switch, Connections Etc. As Required Dsr 1.32 22.00 Each 445.54 427.72 9409.83 9 Supplying And Fixing Brass Batten/ Angle Holder Including Connection Etc. As Required Dsr 1.34 15.00 Each 99.60 95.62 1434.25 Electrical Works 10 Installation ,Testing, Commissioning Of Wall Bracket /Ceiling Fittings Of All Sizes And Shapes Containing Upto Two Ls/Cfl/Led Lamps Per Fitting, Complete With All Accessories Including Connections Etc. As Required. Dsr 1.35 1.00 Each 90.48 86.86 86.86 11 Supplying, Installation, Testing & Commissioning Of Led Recessed/ Surface Down Lighter (Round/ Square/ Rectangular) Smd Type Of Following Body Material With Pmma And Prismatic Diffuser And Construction As Per Is : 10322 With Driver As Per The Requirement With Driver Efficiency >85%, Operating Voltage Ac 140-270 Volt, Frequency 50/60 Hz, Operating Temp Range -50C To 400C, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection ,Thd < 10% , P. F.≥0.95, Ip20, Cri >80, Ugr (Unified Glare Rating) < 19, Flicker Free (Flicker Should Be Below 5%), Life Time (Led, Driver & Electrical Circuitry), Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends, Cct 3000°K /4000°K / 5700°K / 6500°K (As Per Ansi Bin), Sdcm (Standard Deviation Colour Matching) <3, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Confirming To Relevant Bis Standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing Complete In All Respect I/C External Connections With 1.5 Sq.Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy ≥105 And <120 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C) Powder Coated Die Cast /Extruded Aluminium Body Including Trim 18 Watt Mr 19.00 Each 700.00 672.00 12768.00 12 Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required Dsr-5.4 3.00 Each 5681.03 5453.79 16361.37 13 Supplying And Laying 25 Mm X 5 Mm G.I Strip At 0.50 Metre Below Ground As Strip Earth Electrode, Including Connection/ Terminating With G.I. Nut, Bolt, Spring, Washer Etc. As Required. (Jointing Shall Be Done By Overlapping And With 2 Sets Of G.I. Nut Bolt & Spring Washer Spaced At 50Mm) Dsr 5.9 55.00 Metre 109.48 105.11 5780.78 14 Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A) Single Pole Dsr-2.10.1 9.00 Each 194.64 186.85 1681.68 15 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) A) 6 Way (4 + 12), Double Door Dsr-2.3.1 2.00 Each 1677.24 1610.15 3220.30 16 Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) A) 4 Way (4 + 12), Double Door Dsr-2.4.1 1.00 Each 3110.42 2986.01 2986.01 17 Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Dsr-2.10.3 2.00 Each 498.76 478.81 957.62 16 Installation, Testing And Commissioning Of Ceiling Fan, Including Wiring The Down Rods Of Standard Length (Upto 30 Cm) With 1.5 Sq. Mm Frls Pvc Insulated, Copper Conductor, Single Core Cable, Including Providing And Fixing Phenolic Laminated Sheet Cover On The Fan Box Etc. As Required Dsr 1.45 10.00 Each 257.74 247.43 2474.35 17 Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Dsr 1.25 10.00 Each 280.55 269.33 2693.32 18 Installation Of Exhaust Fan In The Existing Opening, Including Making Good The Damage, Connection, Testing, Commissioning Etc. As Required. Upto 450 Mm Sweep Dsr-1.50.1 7.00 Each 342.14 328.45 2299.17 19 Extra For Fixing The Louvers/ Shutters Complete With Frame For A Exhaust Fan Of All Sizes Dsr-1.51 7.00 Each 157.38 151.09 1057.62 20 Supply, Installation, Testing And Commissioning Of Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Metal( Aluminium Alloy) Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Steel/Al Body Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum As Below, 350 Rpm (Tolerance As Per Is : 374-2019), Thd (Total Harmonic Distortion) Less Than 10%, Suitable For Operation With Regulator For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 0C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Ceiling Fan Compliant To Is 374:2019 Fan I/C External Connections With 1.5 Sq.Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required. 9.2.3 10.00 Each 2075.64 1992.62 19926.18 21 Supplying And Laying Of Aluminium Conductor Pvc Insulated Armoured Served Sheathed Cable 1100 Volts Grade At The Depth Of 750 Mm Bellow Ground Level Over A Cushion Of 75 Mm Thick Sand All Around And Protected With Burnt Bricks On Side And On Top .On Surface The Cable Run Shall Be Fixed On Ms Clamps Etc.Of Suitable Size Or As Directed By The Engineer-Incharge ,Complete In All Respect.The Armouring Of The Cable Shall Be Properly Connected With The Earth Conductor By Clamps Etc. Following Size 10 Sqmm X 2 Core Mr 164.00 Rm 410.34 393.93 64603.77 22 Supply & Fixing Of 225/230Mm Sweep Ventilating (Light Duty) Exhaust Fan Complete With Metallic Blade (Steel Bird Guard Protector /Copper Motor For High Air Suction Performance /Capacitor Etc.), Noise Level : (45 - 50) Db, Power Consumption : 45 W, Rated Voltage : 230 V, Rated Frequency : 50 Hz, Motor Type : Normal Speed. Complete In All Respect. Mr 7.00 Each 1665.00 1598.40 11188.80 23 Cost For Murals Work 32.40 Sqm 5850.00 5616.00 181958.40 24 Cost For Solar Street Light With 7M Pole Complete 15.00 Nos 22600.00 21696.00 325440.00 25 Cost For C.C. Bench 12.00 Nos 10000.00 9600.00 115200.00 26 Cost For Dustbin 6.00 Nos 4500.00 4320.00 25920.00 1. Trenching In Ordinary Soil Up To A Depth Of 60 Cm Including Removal And Stacking Of Serviceable Materials And Then Disposing Of Surplus Soil, By Spreading And Neatly Levelling Within A Lead Of 50 M And Making Up The Trenched Area To Proper Levels By Filling With Earth Or Earth Mixed With Sludge Or / And Manure Before And After Flooding Trench With Water (Excluding Cost Of Imported Earth, Sludge Or Manure).. (Horti) 2.1 159.24 Cum 74.51 71.53 11389.98 2 Supplying And Stacking Of Good Earth At Site Including Royalty And Carriage Upto 5 Km Lead Complete (Earth Measured In Stacks Will Be Reduced By 20% For Payment). (Horti) 2.2 79.62 Cum 491.88 472.21 37597.13 Horticulture 3 Supplying And Stacking At Site Dump Manure From Approved Source, Including Carriage Upto 5 Km Lead Complete (Manure Measured In Stacks Will Be Reduced By 8% For Payment) : Screened Through Sieve Of I.S. Designation 20 Mm (Horti) 2.4.1 106.16 Cum 242.46 232.76 24709.88 4 Spreading Of Sludge, Dump Manure And / Or Good Earth In Required Thickness As Per Direction Of Officer-In-Charge (Cost Of Sludge, Dump Manure And / Or Good Earth To Be Paid Separately). (Horti) 2.8 159.24 Cum 49.94 47.94 7634.64 5 Mixing Earth And Sludge Or Manure In The Required Proportion Specified Or Directed By The Officer-In-Charge (Horti) 2.9 159.24 Cum 34.87 33.47 5330.39 6 Grassing With Selection No.1 Grass Including Watering And Maintenance Of The Lawn For 30 Days Or More Till The Grass Forms A Thick Lawn, Free From Weeds And Fit For Mowing Including Supplying Good Earth, If Needed (The Good Earth Shall Be Paid For Separately). In Rows 5 Cm Apart In Both Directions. (Horti) 2.10.1 530.80 Sqm 16.89 16.21 8604.46 7 Providing And Displaying Of Aglaonema Silver Queen Having 30 Cm To 45 Cm. Ht. With 12 To 15 Leaves, Multi Suckers, Fresh And Healthy Leaves, Well Developed In 25 Cm Dia Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.8 60.00 Each 154.50 148.32 8899.22 (Horti) Dsr 3.8 8 Providing And Displaying Of Aglaonema Dove Variety Having Ht. 30 Cm To 45 Cm With 8 To 10 Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.4 75.00 Each 77.42 74.32 5574.03 (Horti) Dsr 3.4 9 Providing And Displaying Of Aglaonema Marentifolium Variety Having Ht. 23 Cm To 30 Cm With 8 To 10 Leaves, Well Developed, Fresh And Healthy With Colorful Leaves In 20 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.10 50.00 Each 64.54 61.96 3097.83 (Horti) Dsr 3.10 10 Providing And Displaying Of Chamaedorea Elegans Palm Having Ht. 60 Cm To 75 Cm, Well Developed With Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.26 50.00 Each 102.70 98.59 4929.51 (Horti) Dsr 3.26 11 Providing And Displaying Of Croton Baby Golden Variety Having Ht.30 Cm And Above, Well Developed With Full Of Fresh And Healthy Leaves In 20 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.28 150.00 Each 39.11 37.55 5632.42 (Horti) Dsr 3.28 12 Providing And Displaying Of Croton Golden (Broad Leaves) Having Ht. 60 Cm To 75 Cm With 3 To 4 Branches, Well Developed, Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.32 150.00 Each 53.81 51.65 7748.01 (Horti) Dsr 3.32 13 Providing And Displaying Of Dieffenbachia Tropic-Snow Having Ht. 60 Cm & Above With 8 - 10 Leaves, Well Developed, Fresh & Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.40 50.00 Each 75.32 72.31 3615.28 (Horti) Dsr 3.40 14 Providing And Displaying Of Dieffenbachia Mosaic Having Ht. 30Cm To 45 Cm With 10-12 Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.41 50.00 Each 75.32 72.31 3615.28 (Horti) Dsr 3.41 15 Providing And Displaying Dianthus In Different Colour Well Developed With Fresh & Healthy Foliage 30 Cm Ht., In Full Bloom With Stacking In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.29 50.00 Each 51.79 49.72 2486.05 (Horti) Dsr 4.29 16 Providing And Displaying Gazania Hybrid In Different Colour Well Developed With Fresh & Healthy Foliage With Full Bloom In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-Incharge. (Horti) 4.31 150.00 Each 61.63 59.16 8874.49 (Horti) Dsr 4.31 17 Providing And Displaying Gaillardia Double Hybrid Variety Well Developed 30 To 45 Cm Ht 20 To 30 Fresh & Healthy Flower With Green Painted Bamboo Stick In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.75 120.00 Each 51.85 49.78 5973.11 (Horti) Dsr 4.75 18 Providing And Stacking Of Plant Mogra Of Height 25 To 30 Cm., 2 To 3 Branch In Earthen Pots Of Size 20 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.88 100.00 Each 44.03 42.27 4226.60 (Horti) Dsr 4.88 19 Providing And Stacking Of Plant Canna Dwarf Of Height 25 To 30 Cm., 2 To 3 Suckers In Earthen Pots Of Size 20 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.89 100.00 Each 34.25 32.88 3287.87 (Horti) Dsr 4.89 20 Bush Rose In Different Colour 2 To 3 Healthy Branch 30 Cm And Above Ht. Well Developed With 8 Or More Flowers / Flower Buds In 20 Cm Earthen Pot /Plastic Pot As Per Direction Of The Officer-Incharge. (Horti) 4.90 100.00 Each 24.47 23.49 2349.13 (Horti) Dsr 4.90 21 Providing And Displaying Budded Rose (H.T. Variety) 3 To 4 Healthy Branch 30 Cm And Above Ht. Well Developed With One And Above Flower Plant In 20 Cm Earthen Pot, As Per Direction Of The Officer-In-Charge. (Horti) 4.91 100.00 Each 31.29 30.04 3003.96 (Horti) Dsr 4.91 22 Providing And Displaying Standard Rose (H.T. Variety) 3 To 4 Healthy Branch 90 Cm And Above Ht. Well Developed With One And Above Flowers In 25 Cm Earthen Pot, As Per Direction Of The Officer-In-Charge. (Horti) 4.93 75.00 Each 143.77 138.02 10351.28 (Horti) Dsr 4.93 23 Providing And Stacking Of Plumeria Rubra Of Height 120-150 Cm. With 3-4 Branches And Thick Stem In Big Size Hdpe Bags As Per Direction Of The Officer-In-Charge. (Horti) 7.72 75.00 Each 381.60 366.34 27475.20 (Horti) Dsr 7.72 24 Providing And Stacking Of Polyalthia Longifolia (Ashok) Of Height 180-195 Cm. In Gunny Bag Of Size 30 Cm As Per Direction Of The Officer-Incharge. (Horti) 7.75 75.00 Each 95.40 91.58 6868.80 (Horti) Dsr 7.75 25 Providing And Stacking Of Saraca Indica (Sita Ashok) Of Height 105-120 Cm. In Big Poly Bags Of Size 25 Cm As Per Direction Of The Officer-In-Charge. (Horti) 7.80 75.00 Each 76.32 73.27 5495.04 (Horti) Dsr 7.80 26 Providing And Stacking Of Terminalia Arjuna Of Height 150-165 Cm. In Big Polybags Of Size 25 Cm As Per Direction Of The Officerin-Charge. (Horti) 7.88 75.00 Each 57.24 54.95 4121.28 (Horti) Dsr 7.88 27 Providing And Stacking Of Calliandra, Emarginata Of Height 45-60 Cm. In Earthen Pot Of Size 20 Cm As Per Direction Of The Officer-Incharge. (Horti) 8.5 150.00 Each 33.39 32.05 4808.16 (Horti) Dsr 8.5 28 Providing And Stacking Of Nerium Oleander (Kaner) Of Height 60- 75 Cm. With 5-6 Branches In Poly Bags Of Size 25 Cm As Per Direction Of The Officer-In-Charge.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
28.
Educational and Research Institute #11318501 Technical Bid
Rate Contract For Supply Of Consumables/Non-Consumables For The Department Of Plastic Surgery , Consumables , Adhesive Hydrocellular Foam Dressing - Size: 12.5 Cm X 12.5 Cm , Adhesive Hydrocellular Foam Sacrum Dressing - Size: 17 Cm X 17 Cm , Adhesion Barrier Film Which Is Translucent And Hydrophilic Adhesion Barrier Made Of Sodium Hyaluronate And Carboxymethylcellulose - Size:5 Inx 6 In , Adhesion Barrier Film Which Is Translucent And Hydrophilic Adhesion Barrier Made Of Sodium Hyaluronate And Carboxymethylcellulose - Size:3 Inx5 In , Barrier Foam Dressing (Sterile) 10Cm X 10Cm , Barrier Gauze Dressing (Sterile) , Centella Asiatica, Silver Oxide And Silk Powder - 50Gm , Centella Asiatica, Silver Oxide And Silk Ointment - 25Gm , Centrifuge Tubes Polypropylene Cap (Sterile) - 15 Ml , Chlorhexidine Gauze Dressing Size 10 X 10Cm , Chlorhexidine Gauze Dressing Size 10 X 30Cm , Cockup Splint , Colloidal Silver Solution - Pre-Cleaning Solution Containing Colloidal Silver - 60 Ml , Compression Bandage , Cotton Crepe Bandage Size - 10Cm X 4M , Cotton Crepe Bandage Size - 15Cm X 4M , Fiber Glass Cast Tape For Limb Splint - Size: 7.5Cm , Fiber Glass Cast Tape For Limb Splint - Size: 10Cm , Fiber Glass Cast Tape For Limb Splint - Size: 15Cm , Finger Splint , G Bone(Modified Hydroxyapatite Granules And Blocks) , Gentamicin In Collagen Base Gel For Wound Healing - 30Gm , Hemostat To Stop Bleeding For Arterial Haemorrhages Comprised Of Agar And Bovine Factor Proteins (Iia, Viia, Xia And Xa) And Acts As A Catalyst In The Clot Formation Process - Pack Size 3Ml Vial , Ionic Silver Solution , Kaolin Impregnated X-Ray Detectable Hemostatic Dressing -Size:10 Cm X 10 Cm , Kaolin Impregnated Vaccum Packed Hemostatic Dressing -Size: 7.5 Cm X 3.7 M, X-Ray Detectable Strip , Kaolin Impregnated Ems Rolled Gauze Hemostatic Dressing -Size:7.5 Cm X 1.2 M , Low Adherent, Absorbent Wound Dressing - Size: 10Cm X 10Cm , Leur Lock Syringe (Disposable) - 2 Ml , Leur Lock Syringe (Disposable) - 5 Ml , Leur Lock Syringe (Disposable) - 20 Ml , Multi-Layered Design Incorporating Hydrocellular Foam With Hyper-Absorbent Lock Away Core Having Five Layers Comprising Of Masking Layer, Silicon Layer,And Polyurethane Breathable Top-Size: 12.9 X 12.9 Cm , Multi-Layered Design Incorporating Hydrocellular Foam With Hyper-Absorbent Lock Away Core Having Five Layers Comprising Of Masking Layer, Silicon Layer,And Polyurethane Breathable Top- Size: 15.4 X 15.4 Cm , Non Adhesive Hydrocellular Foam Dressing - Size: 10Cm X 10Cm , Non-Woven Island Wound Dressing (Non Woven Adhesive Sheet With Absorbent Pad) Size 10Cm X 8Cm , Non-Woven Island Wound Dressing (Non Woven Adhesive Sheet With Absorbent Pad) Size 10Cm X 20Cm , Non-Woven Island Wound Dressing (Non Woven Adhesive Sheet With Absorbent Pad) Size15cm X 8Cm , Orthopaedic Cast Padding-Size 10Cm X 3M , Orthopaedic Cast Padding-Size 15Cm X 3M , Oxidized Regenerated Cellulose, Bactericidal By Ph Action, Absorbable Topicalhemostat - Standard Size: 2 X 3. Approved By Ce , Oxidized Regenerated Cellulose, Bactericidal By Ph Action, Absorbable Topicalhemostat -Size 1 X 2 Fibrillar Form. Approved By Ce , Oxidized Regenerated Cellulose, Bactericidal By Ph Action, Absorbable Topicalhemostat -Size 1 X 1 Woven Form. Approved By Ce , Paraffin Gauze Dressingsize 10 X 10Cm , Paraffin Gauze Dressingsize 15 Cm X 2M , Polyester Wound Contact Layer With Central Cotton Absorbent Layer And Out Hydrophobic Non-Woven Layer. Low Adherent, Absorbent Wound Dressing -Size: 10 Cm X 10 Cm , Polyester Wound Contact Layer With Central Cotton Absorbent Layer And Out Hydrophobic Non-Woven Layer. Low Adherent, Absorbent Wound Dressing -Size: 10 Cm X 20 Cm , Polyester Wound Contact Layer With Central Cotton Absorbent Layer And Out Hydrophobic Non-Woven Layer. Low Adherent, Absorbent Wound Dressing-Size: 50 Cm X 7 Mtr Roll (Unsterile) , Pre-Cut Synthetic Splint System -Size: 10 X 40Cm , Pre-Cut Synthetic Splint System -Size: 12.5 X 76Cm , Pure Type I Bovine Collagen Particles , Rae Endotracheal Tubes (Oral Curved) (Pvc) Cuffed -Size 3.0, 3.5, 4.0, 4.5, 5.0, 5.5 (Set Of All Sizes) (50 Sets) , Rae Endotracheal Tubes (Oral Curved) (Pvc) Non Cuffed - Size 3.0, 3.5, 4.0, 4.5, 5.0, 5.5(Set Of All Sizes) (50 Sets) , Rae Endotracheal Tubes (Oral Curved) (Pvc) Cuffed -Size 6.0, 6.5, 7, 7.5 (Set Of All Sizes) (50 Sets) , Rae Endotracheal Tubes (Oral Curved) (Pvc) Noncuffed - Size 6.0, 6.5, 7, 7.5 (Set Of All Sizes) (50 Sets) , Recombiant Human Epidermal Growth Factor 150Ug/G Gel , Recombiant Human Epidermal Growth Factor 60Ug/G Gel , Silicone Gel In Tubes For Scar Treatment - 10Gm , Sterile Dehydrated Human Amnion Chorion And Polyhexamethylene Biguanide Powder (6Gm) , Sterile Dehydrated Human Umbilical Cord Derived Membrane Allograft-Size:5Cm X 3Cm , Sterile Dehydrated Human Amnion Chorion Membrane With Polyhexamethylene Biguanide- Size: 7Cm X 7Cm , Sterile Dehydrated Human Amnion Chorion Membrane With Polyhexamethylene Biguanide- Size:11M X 7Cm , Skin Marking Pen , Staple Remover , Temporary Biosynthetic Skin Dressingconstructed Of A Silicone Film Bonded To A Cross-Linked Dermal Collagen Coated Nylon Fabric-Size:13 X 13 Cm , Transparent Adhesive Dressing -Size: 60 X 45Cm , Type I Collagen Particles With Mupirocin Ip 2% W/W And Metronidazoleip 1% W/W , Universal Laser Eye Safety Goggles , Varicose Vein Stockings , Wd 40 Lubricant , Pla Reel 1Kg For 3D Printer Medical Grade , Arch Bar For Dental Reconstruction (German Silver/Stainless Steel) , External Fixator Set For Fingers , Hunters Rod (Silicon Rods) For Tendon Repairs , Silicon Block , Tendon Spacer , Nasalimplantdorsal , Chin Implant Adjustable , Cheek Implant (Zygomatic)Left , Cheek Implant (Zygomatic)Right , Round Loop Electrode For Radio Frequency Surgery - Fine Wire , Round Loop Electrode For Radio Frequency Surgery - Regular Wire , Triangularloop Electrode For Radio Frequency Surgery - Fine Wire , Triangular Loop Electrode For Radio Frequency Surgery - Regularwire , Needle Electrode For Radio Frequency Surgery - Fine Wire , Needle Electrode For Radio Frequency Surgery - Superfine Wire , Needle Electrode For Radio Frequency Surgery - Regular Wire , Bipolar Forceps Straight Compatible For Alan And Erbe Diathermy Machinesize 6- 0.2 Mm , Bipolar Forceps Straight Compatible For Alan And Erbe Diathermy Machinesize5 - 0.1 Mm , Bipolar Non-Stick Angled Forceps Compatible For Alan And Erbe Diathermy Machine Size 6 - 0.2 Mm , Bipolar Non-Stick Forceps 4 Fine Tip (1Mm) Compatible For Alan And Erbediathermy Machine , Bipolar Connecting Cable, Vio, Icc, Acc (2-Pin 22 Mm), 4 M For Bipolar Forceps With European Flat Plugcompatible For Alan And Erbe Diathermy , Cable For Bipolar Forceps Compatible For Alan And Erbe , Disposable Adult Patient Plate Compatible For Alan And Erbe Diathermypediatric , Disposable Handswitch Pencil For Monopolar Diathermy Compatible With Alan And Erbe Models , Disposable Neutral Plate - Adult , Disposable Neutral Plate - Pediatric , Ellman Company Radio Frequency Cable , Ellman Company Radio Frequency Plate , Spatula Electrode Compatible For Alan And Erbe Diathermy , Silicon Cord For Insulated Bipolar Forceps (Autoclavable) , Surgical Gloves: Polyurethane Inner Coating With Textured External Surface And Dark Coloured To Prevent Reflective Glare. Internal Surface Should Have Powder Free, Polymer Coated Siliconated. Size : 7.5 , Surgical Gloves: Polyurethane Inner Coating With Textured External Surface And Dark Coloured To Prevent Reflective Glare. Internal Surface Should Have Powder Free, Polymer Coated Siliconated. Size : 7 , Surgical Gloves: Polyurethane Inner Coating With Textured External Surface And Dark Coloured To Prevent Reflective Glare. Internal Surface Should Have Powder Free, Polymer Coated Siliconated. Size : 6.5 , Eutatic Mixture Of Local Anesthetic (Prilocain + Lignocain) Tubes , Beaver Needle Blade 1.5 Mm Cutting Edge, 3 Per Box , Bd Beaver Mini - Blade Knife- Straight, Sharp All Around 180° Cutting Surface, Double Level Blade , Beaver Mini-Blade Angled 60°, Sharp All Around 180° Cutting Surface, Double Level Blade , Multi Fire Vascular Clip Applicator For Liga Clip (5 Mm) , Cramer Wire - Small2 , Cramer Wire - Medium 3 , Cramer Wire - Large 4 , Cramer Wire- Extra Large 6 , Thermoplastic Perforated Sheet For Preparing Malleable And Strong Splint Size:45Cm X 60Cm X 5 Mm Thickness , Hydrojet Cannula , Dr. Lite Bulb Holder , Bulb 24 V 150 W , Ear Suction Canula (Luer Lock Fitting Blunt Point) With Connector16 G, 17 G& 18 G , Wound Protector / Retractor Device 2-4 Cms , Wound Protector / Retractor Device 2.5-6 Cms , Wound Protector / Retractor Device 5-9 Cms , Alar Retractor , Bone Marrow Aspiration Cannula 16 Gauge , Liposuction Tubings With Adaptor Suitable For Liposuction Model Infusa Plus , Paediatric Cuff For Zimmer Tourniquet Size 8 , Paediatric Cuff For Zimmer Tourniquet Size 12 , Ear Tip For Impedence Suitable For Gsi 38 Auto Tymp , Colorado Needles– 76Mm + 10Mm Tip Length , Colorado Needles– 76Mm + 10Mm Tip + 3Mm 45° Uninsulated Tip Length , Colorado Needles– 178Mm + 10Mm Tip + 3Mm 45° Uninsulated Tip Length , Colorado Micro Dissection Needles –3 Cm Straight (3/32 Sleeve) , Nano Crystaline Silver Gel 0.002% W/W , Hair Growth Serum - 60 Ml , Synthetic Biodegradable Temporizing Tri-Layered Open Cell Foam Matrix Made From Biodegradable Polyurethane. Converts Macro Wounds Into Organised Micro Wounds. Regenerates Neodermis And Neovascularization. Size: 5X5 Cm , Synthetic Biodegradable Temporizing Tri-Layered Open Cell Foam Matrix Made From Biodegradable Polyurethane. Converts Macro Wounds Into Organised Micro Wounds. Regenerates Neodermis And Neovascularization. Size: 10X10 Cm , Synthetic Biodegradable Temporizing Tri-Layered Open Cell Foam Matrix Made From Biodegradable Polyurethane. Converts Macro Wounds Into Organised Micro Wounds. Regenerates Neodermis And Neovascularization. Size: 10X20 Cm , Synthetic Biodegradable Temporizing Tri-Layered Open Cell Foam Matrix Made From Biodegradable Polyurethane. Converts Macro Wounds Into Organised Micro Wounds. Regenerates Neodermis And Neovascularization. Size: 20X40 Cm , Aqua Spray Aerosol ( With Bag-On-Valve Technology) For Bactericidal, Fungicidal Action As Gel, Ce Certified & Fda Approved Containing: Naocl (Sodium Hypochlorite) - 0.05%, Lithium Magnesium Sodium Silicate And Sodium Chloride And Purified Water 95.85%. Delivery Mechanism Is Continous Aerosol Creating & Emptying 100% Of Product From Container With No Contamination - 50 Gm , Aqua Spray Aerosol ( With Bag-On-Valve Technology) For Bactericidal, Fungicidal Action As Gel, Ce Certified & Fda Approved Containing: Naocl (Sodium Hypochlorite) - 0.05%, Lithium Magnesium Sodium Silicate And Sodium Chloride And Purified Water 95.85%. Delivery Mechanism Is Continous Aerosol Creating & Emptying 100% Of Product From Container With No Contamination - 100 Gm , Dressing Impregnated With Electrochemically Solutionreleasing Active Chlorine Released From Hypochlorous Acid 0.003% At 100 Ppm And Sodium Hypochlorite Solution With Neutral Ph, Non-Toxic, Human Skin Friendly Madefor Bactericidal, Fungicidal Action, Ce Certified & Fda Approved. Active - Hocl (0.003%) Inactive - Naocl + Nacl (­0.1%) Purified Water - 99.9% & Gauze - Size 10* 10 Cm , Electrochemical Solution Releasing Active Chlorine Released 100 Ppm Active - Hocl (0.003%) Inactive - Naocl + Nacl (­0.1%) Purified Water - 99.9% With Neutral Ph, Non-Toxic, Human Skin Friendly For Wound Care Cleansing & Irrigation - 100 Ml Spray , Electrochemical Solution Releasing Active Chlorine Released 100 Ppm Active - Hocl (0.003%) Inactive - Naocl + Nacl (­0.1%) Purified Water - 99.9% With Neutral Ph, Non-Toxic, Human Skin Friendly For Wound Care Cleansing & Irrigation - 250 Ml Spray , Electrochemical Solutionreleasing Active Chlorine Released 100 Ppm Active - Hocl (0.003%) Inactive - Naocl + Nacl (­0.1%) Purified Water - 99.9% With Neutral Ph, Non-Toxic, Human Skin Friendly For Wound Care Cleansing & Irrigation - 250 Ml Cap Bottle , Electrochemical Solution Releasing Active Chlorine Released 100 Ppm Active - Hocl (0.003%) Inactive - Naocl + Nacl (­0.1%) Purified Water - 99.9% With Neutral Ph, Non-Toxic, Human Skin Friendly For Wound Care Cleansing & Irrigation - 500 Ml Cap Bottle , Electrochemical Solutionreleasing Active Chlorine Released 100 Ppm Active - Hocl (0.003%) Inactive - Naocl + Nacl (­0.1%) Purified Water - 99.9% With Neutral Ph, Non-Toxic, Human Skin Friendly For Wound Care Cleansing & Irrigation - 1000Ml Cap Bottle , Electrochemical Solutionreleasing Active Chlorine Released 100 Ppm Active - Hocl (0.003%) Inactive - Naocl + Nacl (­0.1%) Purified Water - 99.9% With Neutral Ph, Non-Toxic, Human Skin Friendly For Wound Care Cleansing & Irrigation -500 Ml Irrigation Bag With Closed System (Self Collapsible & 2 Ports For Withdrawal One For Iv Set & 1 For Needle Withdrawal) , Electrochemical Solution Releasing Active Chlorine Released 100 Ppm Active - Hocl (0.003%) Inactive - Naocl + Nacl (­0.1%) Purified Water - 99.9% With Neutral Ph, Non-Toxic, Human Skin Friendly For Wound Care Cleansing & Irrigation - 1000 Ml Irrigation Bag With Closed System (Self Collapsible & 2 Ports For Withdrawal One For Iv Set & 1 For Needle Withdrawal) , Wound Care Gel Tube For Moistening And Debridement Of Acute And Chronic Wounds Such As Stage I-Iv Ulcers, Venous Stasis And Diabetic Ulcerations, Post-Surgery Wounds And Bed Soresfor Bactericidal, Fungicidal Action As Gel, Ce Certified & Fda Approved Containing: Naocl (Sodium Hypochlorite) - 0.05%, Lithium Magnesium Sodium Silicate-(4%) And Sodium Chloride And Purified Water 95.85% -15 Gm Gel Tube , Wound Care Gel Tube For Moistening And Debridement Of Acute And Chronic Wounds Such As Stage I-Iv Ulcers, Venous Stasis And Diabetic Ulcerations, Post-Surgery Wounds And Bed Sores For Bactericidal, Fungicidal Action As Gel, Ce Certified & Fda Approved Containing: Naocl (Sodium Hypochlorite) - 0.05%, Lithium Magnesium Sodium Silicate-(4%) And Sodium Chloride And Purified Water 95.85% -30 Gm Gel Tube , Wound Care Gel Tube For Moistening And Debridement Of Acute And Chronic Wounds Such As Stage I-Iv Ulcers, Venous Stasis And Diabetic Ulcerations, Post-Surgery Wounds And Bed Sores For Bactericidal, Fungicidal Action As Gel, Ce Certified & Fda Approved Containing: Naocl (Sodium Hypochlorite) - 0.05%, Lithium Magnesium Sodium Silicate-(4%) And Sodium Chloride And Purified Water 95.85%-50 Gm Gel Tube , Wound Care Gel Tube For Moistening And Debridement Of Acute And Chronic Wounds Such As Stage I-Iv Ulcers, Venous Stasis And Diabetic Ulcerations, Post-Surgery Wounds And Bed Soresfor Bactericidal, Fungicidal Action As Gel, Ce Certified & Fda Approved Containing: Naocl (Sodium Hypochlorite) - 0.05%, Lithium Magnesium Sodium Silicate-(4%) And Sodium Chloride And Purified Water 95.85%-100 Gm Gel Tube , Highly Absorbent Polyurethane Foam Dressing With Soft And Gentle Skin Friendly Silicone Adhesive For Moderate To Highly Exuding Wounds, Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Superior Absorption, Waterproof And Bacteria Proof Semi-Permeable Polyurethane Top Film. Size:7.5X7.5 Cm , Highly Absorbent Polyurethane Foam Dressing With Soft And Gentle Skin Friendly Silicone Adhesive For Moderate To Highly Exuding Wounds, Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Superior Absorption, Waterproof And Bacteria Proof Semi-Permeable Polyurethane Top Film. Size:10X10 Cm , Highly Absorbent Polyurethane Foam Dressing With Soft And Gentle Skin Friendly Silicone Adhesive For Moderate To Highly Exuding Wounds, Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Superior Absorption, Waterproof And Bacteria Proof Semi-Permeable Polyurethane Top Film. Size:12.5X12.5 Cm , Soft And Gentle Silicone Adhesive With Antimicrobial Properties, Highly Absorbent Foam Dressing With Polyurethane Top Layer Which Is Waterproof And Bacteria Proof Semi-Permeable. Profile Of Ionic Silver Upto 7 Days. Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Managing High To Moderate Exuding Infected Chronic Wounds. Size:7.5X7.5 Cm , Soft And Gentle Silicone Adhesive With Antimicrobial Properties, Highly Absorbent Foam Dressing With Polyurethane Top Layer Which Is Waterproof And Bacteria Proof Semi-Permeable. Profile Of Ionic Silver Upto 7 Days. Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Managing High To Moderate Exuding Infected Chronic Wounds. Size:10X10 Cm , Soft And Gentle Silicone Adhesive With Antimicrobial Properties, Highly Absorbent Foam Dressing With Polyurethane Top Layer Which Is Waterproof And Bacteria Proof Semi-Permeable. Profile Of Ionic Silver Upto 7 Days. Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Managing High To Moderate Exuding Infected Chronic Wounds. Size: 12.5X12.5 Cm , Thin, Ultra Flexible And Absorbent Polyurethane Foam Dressing With A Semi-Permeable, Bacteria- And Waterproof Top Film And A Soft Silicone Adhesive Layer. Unique 3D Foam Structure Absorbs The Exudate Vertically And Locks The Fluid Away Within Its Structure,Leaving The Wound Moist For Optimal Wound Healing Conditions. The Soft And Thin Foam Pad At Skin Level Makes It Comfortable To Wear And Is Suited For Users That Need Increased Mobility.Size:5X5 Cm , Thin, Ultra Flexible And Absorbent Polyurethane Foam Dressing With A Semi-Permeable, Bacteria- And Waterproof Top Film And A Soft Silicone Adhesive Layer. Unique 3D Foam Structure Absorbs The Exudate Vertically And Locks The Fluid Away Within Its Structure,Leaving The Wound Moist For Optimal Wound Healing Conditions. The Soft And Thin Foam Pad At Skin Level Makes It Comfortable To Wear And Is Suited For Users That Need Increased Mobility.Size:7.5X7.5 Cm , Thin, Ultra Flexible And Absorbent Polyurethane Foam Dressing With A Semi-Permeable, Bacteria- And Waterproof Top Film And A Soft Silicone Adhesive Layer. Unique 3D Foam Structure Absorbs The Exudate Vertically And Locks The Fluid Away Within Its Structure,Leaving The Wound Moist For Optimal Wound Healing Conditions. The Soft And Thin Foam Pad At Skin Level Makes It Comfortable To Wear And Is Suited For Users That Need Increased Mobility.Size:12.5X12.5Cm , Non Adhesive Antimicrobial, Highly Absorbent Foam Dressing With Polyurethane Top Layer Which Is Waterproof And Bacteriaproof Semi-Permeable. Profile Of Ionic Silver Upto 7 Days. Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Managing High To Moderate Exuding Infected Chronic Wounds. Size:10X20cm , Non Adhesive Antimicrobial, Highly Absorbent Foam Dressing With Polyurethane Top Layer Which Is Waterproof And Bacteriaproof Semi-Permeable. Profile Of Ionic Silver Upto 7 Days. Unique 3D Fit Foam Structure (Conforms To The Wound Bed, Absorbs Vertically, Retains Exudate) For Managing High To Moderate Exuding Infected Chronic Wounds. Size:20X20cm , Calcium Alginate Dressing With 65-75 % Guluronic Acid, Unique Structure Of Calcium Alginate And Cmc Molecules Intertwined In Strings Resulting In Local Vertical Absorption. For Managing Sloughy Wounds With Cavity.Size:3X44cm Ribbon Cavity , Calcium Alginate Dressing With A Unique Structure Of Calcium Alginate And Cmc Molecules Intertwined In Strings Resulting In Local Vertical Absorption And Gel Formation. 5.7%- 6.3% Sodium Zirconium Crystals Contains Silver Which Provide Broad And Continuous Antibacterial Profile For Upto 7 Days And Prevents Microbial Colonisation. For Managing Infected Sloughy Wounds With Cavity And Various Shapes, Sizes And Depths. Comes With Spin Finish To Prevent Fibre Shredding And Has Document Haemostatic Effect.Size:10X10 Cm , Calcium Alginate Dressing With A Unique Structure Of Calcium Alginate And Cmc Molecules Intertwined In Strings Resulting In Local Vertical Absorption And Gel Formation. 5.7%- 6.3% Sodium Zirconium Crystals Contains Silver Which Provide Broad And Continuous Antibacterial Profile For Upto 7 Days And Prevents Microbial Colonisation. For Managing Infected Sloughy Wounds With Cavity And Various Shapes, Sizes And Depths. Comes With Spin Finish To Prevent Fibre Shredding And Has Document Haemostatic Effect.Size:15X15cm , Hydrogel Consisting Of Natural Ingredients Such As Highly Purified Water, Sodium Carboxy-Methylcellulose And Calcium Alginate Without Any Additives. For Effective And Gentle Autolytic Debridement Of Necrotic Tissue, Dry And Sloughy Necrotic Wounds-15 Gm , Non-Invasive Skin Closure Strips With Sterile, Breathable, Non-Woven Rayon Backed Microporous Material Reinforced With Filaments For High Tensile Strength. Contains Hypoallergenic Adhesive To Reduce Skin Trauma. Dimension:12Mm X 100Mm (1/2 X 4 In)(Pack Of 50 Pcs) , Non-Invasive Skin Closure Strips With Sterile, Breathable, Non-Woven Rayon Backed Microporous Material Reinforced With Filaments For High Tensile Strength. Contains Hypoallergenic Adhesive To Reduce Skin Trauma. Dimension:6Mm X 100Mm (1/4 X 4 In) (Pack Of 50 Pcs) , Non-Invasive Skin Closure Strips With Sterile, Breathable, Non-Woven Rayon Backed Microporous Material Reinforced With Filaments For High Tensile Strength. Contains Hypoallergenic Adhesive To Reduce Skin Trauma. Dimension: 25Mm X 125Mm (1 X 5 In)(Pack Of 50 Pcs) , Sterile, Semipermeable, Transparent, Breathable, Water Proof, Bacterial And Viral Barrier Polyurethane Film (That Reduces Chance Of Infection) With Absorbent, Non-Adherent Pad (That Helps Reduce Trauma On Dressing Removal) And Latex Free Hypoallergenic Acrylic Adhesive That Is Gentle To Skin- Size: 9Cm X 10Cm (Pack Of 25 Pcs) , Sterile, Semipermeable, Transparent, Breathable, Water Proof, Bacterial And Viral Barrier Polyurethane Film (That Reduces Chance Of Infection) With Absorbent, Non-Adherent Pad (That Helps Reduce Trauma On Dressing Removal) And Latex Free Hypoallergenic Acrylic Adhesive That Is Gentle To Skin- Size:6Cm X 10Cm(Pack Of 50 Pcs) , Transparent, Semipermeable, Breathable, Water Proof, Bacterial And Viral Barrier, Synthetic Blood Penetration Resistance, Sterile, Polyurethane Film Peripheral Iv Dressing For Adults Reinforced With Soft Cloth Border And Notch. Non-Latex, Hypoallergenic Pattern Coated Acrylic Adhesive With 2 Large Extra Sterile Soft Cloth Tape Strips For Additional Securement And Complies With Iso-10993 Standards For Biocompatibility- Size: 6.5Cm X 7Cm (Pack Of 100 Pcs) , Silicone Gel Sheets For Scar Management - Size: 5 X5 Cm , Silicone Gel Sheets For Scar Management - Size: 10X10 Cm , Silicone Gel Sheets For Scar Management - Size: 20X20 Cm , Sterile Collagen Particles - 2.5Ml , Sterile Collagen Particles - 5Ml , Sterile Collagen Particles - 10Ml , Sterile Collagen Particles - 15Ml , Sterile Medicated Collagen Particles - 5Ml , Sterile Medicated Collagen Particles - 10 Ml , Sterile Medicated Collagen Particles - 15 Ml , Sterile Medicated Collagen Sheets In Dry Form Size: 10X10 Cm , Sterile Medicated Collagen Sheets In Dry Form Size: 10X20 Cm , Sterile Medicated Collagen Sheets In Dry Form Size: 15X30 Cm , Collagen Sheets Pure Type 1&3 Triple Helical In Wet Form - Size: 10X20 Cm , Collagen Sheets Pure Type 1&3 Triple Helical In Wet Form - Size: 15X30 Cm , Collagen Sheets Pure Type 1&3 Triple Helical In Dry Form - Size: 10X20cm , Collagen Sheets Pure Type 1&3 Triple Helical In Dry Form - Size: 15X30 Cm , Collagen Sheets Pure Type 1&3 Triple Helical In Meshed Form - Size: 10X20 Cm , Collagen Sheets Pure Type 1&3 Triple Helical In Meshed Form - Size: 15X30 Cm , Sterile Nano Oligosacchride Factor (Nosf) Foam Dressing With Border. Also Impreganted With Carboxy Methly Cellulose And Lipid Particles, Border - Size: 10 Cm X 10 Cm , Sterile Nano Oligosacchride Factor Foam (Nosf) Dressing With Border. Also Impreganted With Carboxy Methly Cellulose And Lipid Particles, Border- Size: 15 Cm X 20 Cm , Sterile Nano Oligosacchride Factor (Nosf) Contract Layer Dressing Impreganated Carboxy Methly Cellulose And Lipid Particles, Contact Layer - Size: 10 Cm X 10 Cm , Sterile Nano Oligosacchride Factor (Nosf) Contract Layer Dressing Impreganated Carboxy Methly Cellulose And Lipid Particles, Contact Layer - Size: 15 Cm X 20 Cm , Sterile Nano Oligosacchride Factor (Nosf) Micro Adhesive Dressingimpreganated Carboxy Methly Cellulose And Lipid Particles, Ma - Size: 10 Cm X 10 Cm , Sterile Nano Oligosacchride Factor (Nosf) Micro Adhesive Dressingimpreganated Carboxy Methly Cellulose And Lipid Particles, Ma - Size: 6 Cm X 6 Cm , Sterile Nano Oligosacchride Sucrose Factor ( Nosf) Healing Matrix, Micro Adhesive. Size 15Cmx 20Cm, European Ce Approved , Sterile Nano Oligosacchride Sucrose Factor ( Nosf) Healing Matrix, Micro Adhesive. Size 10Cmx 10Cm, European Ce Approved , Sterile Nano Oligosacchride Sucrose Factor ( Nosf) Healing Matrix, Micro Adhesive. Size 6Cmx 6Cm, European Ce Approved , Sterile Nano Oligosacchride Sucrose Factor ( Nosf) Healing Matrix, Contact Layer. Size 15 Cmx 20 Cm, European Ce Approved , Hyperoxygenated Glycerides Of Essestial Fatty Acid (Linoleic Acid 60%) With Tecopherol - 99% And Aniseed Pergume 1%, For Pressure Ulcer Prevention-Size 50 Ml , Hyperoxygenated Glycerides Of Essestial Fatty Acid (Linoleic Acid 60%) With Tecopherol - 99% And Aniseed Pergume 1%, For Pressure Ulcer Prevention-Size 20 Ml , Sterile Fish Collagen Type I Collagen Sponge -Size 10 X 10Cm , Occulusive Wound Dressing Non-Resorbable Which Contains Bio Cellulose 100%, Monolaurin 7%In A Sterile Pack-Size: 5 X 5 Cm , Occulusive Wound Dressing Non-Resorbable Which Contains Bio Cellulose 100%, Monolaurin 7%In A Sterile Pack-Size: 10 X 10 Cm , 2 Layer Polyurethane Ester Foam Dressings Size (11 X 8 X 1.8Cm) With Spiral Cut Sheet Use For Instillation (Not Irrigation), 1 Vac Instillation Trac Pad With 5 Lumen Tubing Set, 2 Sheets Of Vac Advanced Drape, 2 Packets Ofcavilon No Sting Barrier Film, 1 Disposable Ruler. With Cdsco And Fda & Ce Certified , 2 Layer Polyurethane Ester Foam Dressings Size (17 X 15 X 1.8Cm) With Spiral Cut Sheet Use For Instillation (Not Irrigation), 1 Vac Instillation Trac Pad Wit 5 Lumen Tubing Set, 2 Sheets Of Vac Advanced Drape, 2 Packets Ofcavilon No Sting Barrier Film,1 Disposable Ruler. With Cdsco And Fda & Ce Certified. , 2 Layer Polyurethane Ester Foam Dressings Size (25 X 15 X 1.6Cm) With Spiral Cut Sheet Use For Instillation (Not Irrigation), 1 Vac Instillation Trac Dual Pad With 5 Lumen Tubing Set, 5 Sheets Of Vac Advanced Drape, 4 Packets Ofcavilon No Sting Barrier Film,1 Disposable Ruler. With Cdsco And Fda & Ce Certified. , 3 Layer Foam Dressing Used For Instillation Therapy Size (25.6 X 15 X 0.8Cm, 25.6 X 15 X 1.6Cm, Contact Layer 25.6 X 15 X 0.8Cm W And 1Cm Circular Holes), 1 Vac Instillation Trac Pad With 5 Lumen Tubing Set, 4 Sheets Ofv.A.C. Advanced Drape, 4 Packets Ofcavilon No Sting Barrier Film,1 Disposable Ruler.With Cdsco And Fda & Ce Certified , 3 Layer Foam Dressings Used For Instillation Theraphy Size (25.6 X 15 X 0.8Cm, 25.6 X 15 X 1.6Cm, Contact Layer 25.6 X 15 X 0.8Cm And 1Cm Circular Holes), 1 Vac Instillation Trac Dual Pad With 5 Lumen Tubing Set, 6 Sheets Of Vac Advanced Drape,5 Packets Of Cavilon No Sting Barrier Film, 1 Disposable Ruler. With With Cdsco And Fda & Ce Certified , 500 Ml Canister (Sterile) Sensing Tracing Pad With 5 Lumen Tubing Set Prevent Leakage And Blockage, With Gel (Containing Sodium Polyacrylate To Covert Exudate Into Gel, So No Cross Contamination) And Clamp And Connector. With Cdsco And Fda & Ce Certified , 300 Ml Canister (Sterile) Sensing Trac Pad With 5 Lumen Tubing Prevent Leakage And Blockage, With Gel (Containing Sodium Polyacrylate To Covert Exudate Into Gel, So No Cross Contamination) Andclamp And Connector. With Cdsco And Fda & Ce Certified , 1000 Ml Canister (Sterile) With Instillation Trac Pad With 5 Lumen Tubing Set For Prevent Leakage And Blockage With Gel (Containing Sodium Polyacrylate To Covert Exudate Into Gel, So No Cross Contamination) And , Clamp And Connector. With Cdsco And Fda & Ce Certified , Foam Dressing (10 X 7.5 X 3.2Cm), 2 Sheets Of Vac Drape, 5 Lumen Trac Padtechonology With Connector, 1 Disposable Ruler, 1 Canister 300 Ml (Sterile) With 5 Lumentechonologytubing, Clamp And Connector With Cdsco And Fda & Ce Certified , Foam Dressing (18 X 12.5 X 3.2Cm), 2 Sheets Of Vac Drape, 5 Lumen Trac Padtechonology With Connector, 1 Disposable Ruler, 1 Canister 500 Ml (Sterile) With 5 Lumentechonologytubing, Clamp And Connectorwith Cdsco And Fda & Ce Certified , Foam Dressing (26 X 15 X 3.2Cm), 2 Sheets Of Vac Drape, 5 Lumen Trac Padtechonology With Connector, 1 Disposable Ruler, 1 Canister 1000 Ml (Sterile) With 5 Lumentechonologytubing, Clamp And Connector With Cdsco And Fda & Ce Certified , Foam Dressing (26 X 15 X 1.6Cm), 2 Sheets Of Vac Drape, 1 Instillation Trac Pad With 5 Lumen Tubing Set With Connector, 1 Disposable Ruler, 5 Lumen Trac Padtechonology With Connector, 1 Disposable Ruler, 1 Canister 300 Ml (Sterile) With 5 Lumentechonologytubing, Clamp And Connector With Cdsco And Fda & Ce Certified , Cassette With Instillation Tubing And 38Mm Spikeable Cap Adaptor. With Cdsco And Fda & Ce Certified , An Absorbent, Non Adherent Sterile Dressing With More Than 98% Silk Proteins. Nvtr Rate More Than 900 Kg/M2/24 Hours, Thickness Of Less Than 2Mm - Size: 5 X 5 Cm , An Absorbent, Non Adherent Sterile Dressing With More Than 98% Silk Proteins. Nvtr Rate More Than 900 Kg/M2/24 Hours, Thickness Of Less Than 2Mm - Size: 10 X 10 Cm , An Absorbent, Non Adherent Sterile Dressing With More Than 98% Silk Proteins. Nvtr Rate More Than 900 Kg/M2/24 Hours, Thickness Of Less Than 2Mm Size Dressing Impregnanted With Silver Ions And Sustained Release Upto 7 Days, Silver Content Of 1.5 Mg/Cm2 - Size: 5 X 5 Cm , An Absorbent, Non Adherent Sterile Dressing With More Than 98% Silk Proteins. Nvtr Rate More Than 900 Kg/M2/24 Hours, Thickness Of Less Than 2Mm Size Dressing Impregnanted With Silver Ions And Sustained Release Upto 7 Days, Silver Content Of 1.5 Mg/Cm2 - Size: 10 X 10 Cm , Anti Biofilm Wound Irrigation Solution With Betaine Surfactant And 0.1% Polyaminopropyl Biguanide (Polithexanide) 40 Ml , Anti Biofilm Wound Irrigation Solution With Betaine Surfactant And 0.1% Polyaminopropyl Biguanide (Polithexanide) 350 Ml , Anti Biofilm Wound Irrigation Rinsing Solution With Betaine Surfactant And 01% Polyaminopropyl Biguanide (Polithexanide) 1000 Ml , Anti Biofilm Wound Gel With Glycerol, Hydroxyethylcellulose, Betaine Surfactant And 0.1% Polyaminopropyl Biguanide (Polithexanide) 30 Mg , Anti Biofilm Wound Gel With Glycerol, Hydroxyethylcellulose, Betaine Surfactant And 0.1% Polyaminopropyl Biguanide (Polithexanide) 50 Gms , Anti Biofilm Wound Gel With Hydroxyethylcellulose, Glycerol, Betaine Surfactant And 0.1% Polyaminopropyl Biguanide (Polithexanide) 250 Gms , Lipido-Colloid Wound Contact Layer Impregnated With Silver Salts And Poly-Absorbent Fibres - Size: 6X6 Cm , Lipido-Colloid Wound Contact Layer Impregnated With Silver Salts And Poly-Absorbent Fibres - Size: 10X10 Cm , Lipido-Colloid Wound Contact Layer Impregnated With Silver Salts And Poly-Absorbent Fibres - Size: 15X20 Cm , Sterilenon-Occlusivewound Contact Layer Composed Of A Polyester Mesh Impregnatedwithhydrocolloid Particles (Cmc), Cohesion Polymers And Petroleum Jelly Usinglipido-Colloid Technology (Tlc) - Size: 10 X 10Cm , Sterilenon-Occlusivewound Contact Layer Composed Of A Polyester Mesh Impregnatedwithhydrocolloid Particles (Cmc), Cohesion Polymers And Petroleum Jelly Usinglipido-Colloid Technology (Tlc) - Size: 15 X 20 Cm , Sterilenon-Occlusivewound Contact Layer Composed Of A Polyester Mesh Impregnatedwithhydrocolloid Particles (Cmc), Cohesion Polymers And Petroleum Jelly Usinglipido-Colloid Technology (Tlc) - Size: 20 X 30 Cm , Sterilenon-Occlusive Woundcontact Layer Consists Of Silver Healing Matrix Made Of Polyester Mesh Impregnated With Hydrocolloid Particles (Cmc), Petroleum Jelly, Polymers And Silver Salts (Ag) Usinglipido- Colloid Technology (Tlc) - Size: 10 X 10 Cm , Sterilenon-Occlusive Woundcontact Layer Consists Of Silver Healing Matrix Made Of Polyester Mesh Impregnated With Hydrocolloid Particles (Cmc), Petroleum Jelly, Polymers And Silver Salts (Ag) Usinglipido-Colloid Technology (Tlc) - Size: 15 X 20 Cm , Sterile Non-Occulusive Wound Contact Layer Consists Of Silver Healing Matrix Made Of Polyester Mesh Impregnated With Hydrocolloid Particles (Cmc), Petroleum Jelly, Polymers And Silver Salts (Ag) Usinglipido-Colloid Technology (Tlc) - Size: 20 X 30 Cm , Sterile Wound Contact Layer Consists Of Silver Salts, Poly-Absorbent Fibres, Hydrocolloid Particles (Cmc), Petroleum Jelly And Polymers Usinglipido-Colloid Technology (Tlc) - Size: 6 Cm X 10Cm , Sterile Wound Contact Layer Consists Of Silver Salts, Poly-Absorbent Fibres, Hydrocolloid Particles (Cmc), Petroleum Jelly And Polymers Usinglipido-Colloid Technology (Tlc) - Size: 10 Cm X 10 Cm , Sterile Wound Contact Layer Consists Of Silver Salts, Poly-Absorbent Fibres, Hydrocolloid Particles (Cmc), Petroleum Jelly And Polymers Usinglipido-Colloid Technology (Tlc) - Size: 15 Cm X 20 Cm , Sterile Self -Adherent Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad, A Super Absorbent Layer, A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing - Size: 8 X 8 Cm , Sterile Self -Adherenttlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad, A Super Absorbent Layer, A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing - Size: 13 X 13 Cm , Sterile Self -Adherenttlc Matrix (Lipido Colloid Technology) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad, A Super Absorbent Layer, A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing - Size: 10 X 25 Cm , Sterile Non-Woven Pad Composed Of Cohesive And Highly Absorbent Hydro-Desloughing Fibres (Polyacrylate), Combined Withtlc Matrix (Lipido Colloid Technology) Wound Contact Layer To Absorb, Trap And Drainage Of Slough From The Wounds. Sizes: 6X6 Cm , Sterile Non-Woven Pad Composed Of Cohesive And Highly Absorbent Hydro-Desloughing Fibres (Polyacrylate), Combined With Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer To Absorb, Trap And Drainage Of Slough From The Wounds. Sizes: 10X10 Cm , Sterile Non-Woven Pad Composed Of Cohesive And Highly Absorbent Hydro-Desloughing Fibres (Polyacrylate), Combined With Tlc Matrix (Lipido Colloid Technology) Wound Contact Layer To Absorb, Trap And Drainage Of Slough From The Wounds. Sizes: 15X20 Cm , Hydrofiber Dressings With 1.2% W/W Impregnated Ionic Silver With Edta & Bec, Ce, Iso & Fda Approved - Size:5 X 5Cm , Hydrofiber Dressings With 1.2% W/W Impregnated Ionic Silver With Edta & Bec, Ce, Iso & Fda Approved - Size: 10 X 10 Cm , Hydrophilic Foam Dressing - Size: 10X10cm , Hydrophilic Foam Dressing - Size: 15X30cm , Hydrophilic Foam Silver Pad Dressing (Non-Adhesive And Antimicrobial) - Size:10X10cm , Hydrophilic Foam Silver Pad Dressing (Non-Adhesive And Antimicrobial) - Size: 15X30cm , Hydrocolloid Dressing With Absorbable Foam Padding (Extra-Thin Dressing) - Size: 10X10cm , Hydrocolloid Dressing With Absorbable Foam Padding- Size: 15X30 Cm , Sterile Human Amnion Chorion And Phmb Powder (3G ) , Sterile Polyhexamethylene Biguanide Coated Dehydrated Human Amnion Chorion Allograft - Size: 5X5 Cm , Sterile Polyhexamethylene Biguanide Coated Dehydrated Human Amnion Chorion Allograft - Size: 8X6 Cm , Sterile Polyhexamethylene Biguanide Coated Dehydrated Human Amnion Chorion Allograft- Size: 12X6 Cm , Film Dressing With Anti-Microbial Pad Using Dtac Technology-Size: 6X7 Cm , Film Dressing With Anti-Microbial Pad Using Dtac Technology-Size: 8X10 Cm , Film Dressing With Anti-Microbial Pad Using Dtac Technology-Size: 10X15 Cm , Film Dressing With Anti-Microbial Pad Using Dtac Technology-Size: 10X25 Cm , Film Dressing With Anti-Microbial Pad Using Dtac Technology-Size: 10X35 Cm , Topical Skin Adhesive For Wound Closure - 2-Octyl Cyanoacrylate High Viscosity Formulation For Small Incisions And Lacerations; 0.36 Ml Adhesive Volume , Semipermeable Waterproof Plastic Wound Dressing With Silver - Size: 5 Cm X 7 Cm , Semipermeable Waterproof Plastic Wound Dressing With Silver - Size: 15 Cm X 15 Cm , Semipermeable Adhesive Dressing Clear 6 X 7 Cm , Semipermeable Adhesive Dressingclear 8.5 X 10.5 Cm , Transparent Film Dressings Of A Thin Film Backing With Hypoallergenic, Latex-Free Adhesive - Size 6 Cm X 7 Cm , Transparentsemi Permeable Dressing Frame Style For Neonates Without Pad 10 Cm X 12 Cm Made Of Hypoallergenic, Latex-Free Adhesive , Transparentsemi Permeable Dressing Frame Style For Neonates Without Pad 6 Cm X 7 Cm Made Of Hypoallergenic, Latex-Free Adhesive , Adhesive Bandage Strips For Skin Closure Size 0.25X1.5 (Cost Per Strip Will Be Taken For Comparison Of Price) , Adhesive Bandage Strips For Skin Closure Size 0.25X4 (Cost Per Strip Will Be Taken For Comparison Of Price) , Adhesive Bandage Strips For Skin Closure Size 0.5X2 (Cost Per Strip Will Be Taken For Comparison Of Price) , Adhesive Bandage Strips For Skin Closure Size 0.5X4 (Cost Per Strip Will Be Taken For Comparison Of Price) , Reinforced Adhesive Skin Closures 0.125X3 (Cost Per Strip Will Be Taken For Comparison Of Price) , Reinforced Adhesive Skin Closures 1X5 (Cost Per Strip Will Be Taken For Comparison Of Price) , Silver Dressing With Pu Backing Layer And Absorbant Pad Dressing - Size: Dressing 5 X 7 Cm And Pad 2.5 X 4 Cm , Silver Dressing With Pu Backing Layer And Absorbant Pad Dressing - Size: Dressing 15 X 15 Cm And Pad 10 X 10Cm , Silver Dressing With Pu Backing Layer And Absorbant Pad Dressing - Size: Dressing 9 X 35Cm And Pad 5 X 30Cm , Super - Absorbant, Polyurethane Foam Dressing With Vertical Absorption With Silicone Wound Contact Layer - Size: 10 Cm X 10 Cm , Super - Absorbant, Polyurethane Foam Dressing With Vertical Absorption With Silicone Wound Contact Layer - Size: 10 Cm X 20 Cm , Super - Absorbant, Polyurethane Foam Dressing With Vertical Absorption With Silicone Wound Contact Layer - Size: 15 Cm X 15 Cm , Super - Absorbant, Polyurethane Foam Dressing With Vertical Absorption With Silicone Wound Contact Layer (Sacrum) - Size: 17.5 Cm X 17.5 Cm , Super - Absorbant, Polyurethane Foam Dressing With Vertical Absorption With Silicone Wound Contact Layer Heel 2D - Size: 16 Cm X 24 Cm , Super - Absorbant, Bacteria Binding Polyurethane Foam Dressing With Dialkyl Carbamoyl Chloride Layered - Size: 12.5 Cm X 12.5 Cm , Super - Absorbant, Bacteria Binding Polyurethane Foam Dressing With Dialkyl Carbamoyl Chloride Layered- Size: 15 Cm X 15 Cm , Super - Absorbant, Bacteria Binding Polyurethane Foam Dressing With Dialkyl Carbamoyl Chloride Layered - Size:17.5 Cm X 17.5 Cm , Antimicrobial Hydrocellular Foam Dressing. Ag Non Adhesive - Size: 10 Cm X 10 Cm , Antimicrobial Hydrocellular Foam Dressing. Ag Non Adhesive - Size: 12.5 Cm X 12.5 Cm , Antimicrobial Hydrocellular Foam Dressing. Ag Non Adhesive - Size: 15 Cm X 15 Cm , Antimicrobial Silver Dressing With Nano Crystallinewith Sustained Release Of Silver For 7 Days Having Polyster Mesh Size 15 Cm X 15 Cm , Antimicrobial Silver Dressing With Nano Crystallinewith Sustained Release Of Silver For 7 Days Having Polyster Mesh Size 10 Cm X 12.5 Cm , Hydrocellular Foam Dressing With Silicone Adhesive - Size: 10 Cm X 10 Cm , Hydrocellular Foam Dressing With Silicone Adhesive - Size: 10 Cm X 20 Cm , Hydrocellular Foam Sacrumdressing With Silicone Adhesive - Size: 16.8 Cm X 17.1 Cm , Self Adhesive Silicone Gel Sheet - Size: 12 Cm X 6 Cm , Super Oxidized Solution With Hypochlorous Acid 0.003% And Sodium Hypochlorite 0.004% With Neutral Ph - 100Ml , Super Oxidised Solution - Irrigation Solution With Hypochlorous Acid In Oxidized Water Base- 60Ml , Super Oxidized Gel With Hypochlorous Acid 0.008% And Sodium Hypochlorite 0.002%With Neutral Ph - 60Gm , Microbial Antiseptic Solution Poly Hexamethylene Biguanide - 100Ml , Hyaluronicacid Sodium Salt Gel - 50Gm , Phmb Impregnated Antimicrobial Dressing - Size 10X10 Cm And Absorbent Pad 5 X 5 Cm , Phmb Impregnated Antimicrobial Dressing - Size 10X25 Cm And Absorbent Pad 5 X 20 Cm , Antimicrobial Nano Crystaline Silver Dressing. Rayon Polyster Mesh Sandwiched Between Polyethylene Layers Binded With Ultrasonic Welds. Size 10Cm X 10 Cm , Antimicrobial Nano Crystaline Silver Dressing. Rayon Polyster Mesh Sandwiched Between Polyethylene Layers Binded With Ultrasonic Welds. Size 15Cm X 15 Cm , Antimicrobial Nano Crystaline Silver Dressing. Sustained Release Of Silver 70-100 Ppm For 3 Days Should Allow Fewer Dressing Changes. Size 20 Cm X 20 Cm , Antimicrobial Nano Crystaline Silver Dressing. Sustained Release Of Silver 70-100 Ppm For 3 Days Should Allow Fewer Dressing Changes. Size 15 Cm X 15 Cm , Tulle Gras Paraffin Gauze Dressing Medicated 10 Cm X 10 Cm , Tulle Gras Paraffin Gauze Dressing Chlorhexidine Medicated 15 Cm X 30 Cm , Partially-Hydratedamorphous Hydrogel15gms , Amorphous Hydrogel Wound Dressing Antimicrobial Antibacterial Gel With Nano Silver - 15 Gms , Amorphous Hydrogel Wound Dressing Antimicrobial Antibacterialgel With Nano Silver - 50 Gms , Cmc Sodium Wound Dressing Gel-15 Gms , Transparent Polyurethane Surgical Drape Size 40 Cm X 42 Cm , Transparent Polyurethane Surgical Drape Size 30 Cm X 28 Cm , Waterproof & Bacteria Proof Post-Operative Film Dressing For Post Surgical Wounds & Minor Trauma Wounds Size 9.5 Cm X 8.5 Cm , Waterproof & Bacteria Proof Post-Operative Film Dressing For Post Surgical Wounds & Minor Trauma Wounds Size 15.5 Cm X 8.5 Cm , Transparent Film Roll. Thin Waterproof Polyurethane Film With High Mvtr With Low Allergy Water Based Acrylic Adhesive That Minimizes The Risk Of Skin Irritation Or Sensitivity, Film Is Highly Conformable And Extensible To Fit To Awkward Dressing Areas, Unique And Novel Roll Format Enables Rapid And Economical Use- Size:10 Cm X 10 Cm , Stainless Steel Suture 5-0/ 6-0 (Pack Of 12 Nos) , Synthetic Absorbable Sutures (Polyglycolic Acid/Polyglactin 910) -4/0 With 16Mm 5/8 Circle Cutting 45Cm (Pack Of 12 Foils) , Absorbent, Low Adherent Post Operative Dressing With Adhesive Coated Backing Material. - Size: 15 Cm X 8 Cm , Absorbent, Low Adherent Post Operative Dressing With Adhesive Coated Backing Material. - Size: 25 Cm X 10 Cm , Negative Pressure Wound Therapy Dressing. Subatmospheric Pressure Therapy Pu Foam - Size: 10X 10 X 2.8 Cm And 0.4Ltr Fluid Cask With Gel , Negative Pressure Wound Therapy Dressing. Subatmospheric Pressure Therapy Pu Foam - Size: 10X 15 X 2.8 Cm And 0.4Ltr Fluid Cask With Gel , Negative Pressure Wound Therapy Dressing. Subatmospheric Pressure Therapy Pu Foam - Size: 23.8 X 15.8X 2.8 Cm And 1 Ltr Fluid Cask With Gel , Dressing Material For Negative Pressure Wound Therapy Dressing Kit Consister - 500Ml Capacity Large , Dressing Material For Negative Pressure Wound Therapy Dressing Kit Consister - 500Ml Capacity Medium , Dressing Material For Negative Pressure Wound Therapy Dressing Kit Consister - 500Ml Capacity Small , Vinyl Acetate Copolymer 250Ml/1000Mldisposable Exudate Collectionpouch Individually Sealed In Sterile Package, Used With 250Ml / 1000Ml Reusable Containers. The Securely Mounted Pouch Tube Consists Of 3 Active Ventilation Lumens And 1 Exdate Lumen. It Should Have Chemical Filter To Trap Moisture, Odour, To Monitor The Amount Of Infections Fluid Being Removed, To Solidify Infectious Fluid And Should Have Minimum Capacity , Advance Wound Care Dressing, Non-Woven Highly Absorbent, Hemostatic Gelling Fiber Composed Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized And Moisture Proof Packing, Manufactured In India, Gmp And Iso 13485 Certified. Size: 10X10 Cm , Advance Wound Care Dressing, Non-Woven Highly Absorbent, Hemostatic Gelling Fiber Composed Of 100% Natural Biopolymer With A Net Positive Charge, Gamma Sterilized And Moisture Proof Packing, Manufactured In India, Gmp And Iso 13485 Certified. Size: 15 X 15 Cm , Microsutures Polymide Black Coloured 11/0 Needle Thickness 70-100 Microns Length 3.5 - 5Mm3.8 Circle135 Degreesmicro Taper Point(Pack Of 12 Nos) , Microsutures Polymide Black Coloured10/0 Needle Thickness 70- 100 Microns Length 3.5 - 5Mm3.8 Circle 135 Degrees Micro Taper Point (Pack Of 12 Nos) , Microsutures Polymide Black Coloured9/0 Needle Thickness 100-150 Microns Length 3.5 - 5Mm3.8 Circle 135 Degrees Micro Taper Point (Pack Of 12 Nos) , Microsutures Polymide Black Coloured8/0 Needle Thickness 100-150 Microns Length4 - 7 Mm3.8 Circle 135 Degrees Micro Taper Point (Pack Of 12 Nos) , Hydrophilic Non-Woven Gauze Roll, Impregnated With A Naturally Occurring Inorganic Mineral - Kaolin, Along With A Unique Direct Pressure Adhesive Bandage Packaged In A Foil Pouch For Aseptic Removal - 7.6 Cm X 3.7 Cm , Hemostatic Dressing For External Application, 4 Ply Non-Woven Gauze - Size:4 X 4 Inches, Impregnated With A Naturally Occurring Inorganic Mineral - Kaolin, With A X-Ray Detectable Strip Packaged In A Foil Pouch For Aseptic Removal.Fda & Ce Approved , Patient Pre-Operative Skin Preparation Solution 25 Ml In One-Step Sterile Applicator Container For Single Use With 2% Chg And 70% Ipa With Orange Tint Color For Visibility. Fda Approved. , Patient Pre-Operative Skin Preparation Solution 10 Ml In 0Ne-Step Sterile Applicator Container For Single Use With 2% Chg And 70% Ipa With Orange Tint Color For Visibility. Fda Approved. , Thromboembolism Stocking , Acellular Dermal Matrix, Flexible, More Collagen, Stronger, Non- Chemical Cross Linked, Conformable At Complicated Anatomic Areas, Easy To Use, Handle And Apply. Size (74X52x1mm), Usfda And Dcgi Approved , Acellular Dermal Matrix, Flexible, More Collagen, Stronger, Non- Chemical Cross Linked, Conformable At Complicated Anatomic Areas, Easy To Use, Handle And Apply. Size (74X52x2mm), Usfda And Dcgi Approved , Acellular Dermalmatrix, Flexible, More Collagen, Stronger, Non- Chemical Cross Linked, Conformable At Complicated Anatomic Areas, Easy To Use, Handle And Apply. Size (148X105x1mm) Usfda And Dcgi Approved , Acellular Dermalmatrix, Flexible, More Collagen, Stronger, Non- Chemical Cross Linked, Conformable At Complicated Anatomic Areas, Easy To Use, Handle And Apply. Size (52X37x1mm) , Usfda And Dcgi Approved , Acellular Dermalmatrix, Flexible, More Collagen, Stronger, Non- Chemical Cross Linked, Conformable At Complicated Anatomic Areas, Easy To Use, Handle And Apply. Size (52X37x2mm), Usfda And Dcgi Approved , Acellular Dermalmatrix, Fenestrated, Non- Chemical Cross Linked, For High Exudating Wounds, Easy To Use, Handle And Apply. Size (74X52x1mm), Usfda And Dcgi Approved , Acellular Dermalmatrix, Flexible, More Collagen, Stronger, Non- Chemical Cross Linked, For High Exudating Wounds, Easy To Use, Handle And Apply. Size (148X105x2mm), Usfda And Dcgi Approved , Acellular Dermalmatrix, Fenestrated, Non- Chemical Cross Linked, For High Exudating Wounds, Easy To Use, Handle And Apply. Size (74X52x3mm), Usfda And Dcgi Approved , Acellular Dermal Matrix, Fenestrated, Non- Chemical Cross Linked, For High Exudating Wounds, Easy To Use, Handle And Apply. Size (52X37x1mm) , Usfda And Dcgi Approved , Acellular Dermalmatrix, Fenestrated, Non- Chemical Cross Linked, For High Exudating Wounds, Easy To Use, Handle And Apply. Size (52X37x3mm), Usfda And Dcgi Approved , Acellular Dermalmatrix, Single Step Procedure For Dermal Regeneration, Non- Chemical Cross Linked, Room Tempreture Storage, Size(74X52x1mm), Usfda And Dcgi Approved , Acellular Dermalmatrix, Single Step Procedure For Dermal Regeneration, Non- Chemical Cross Linked, Room Tempreture Storage, Size(52X37x1mm), Usfda And Dcgi Approved , Dermal Regeneration Template Bilayer (Bovine Collagen And Glycosaminoglycan (Chondroitin-6- Sulfate) And Silicone Layer - Size: 2In X 2In (5Cmx5cm) , Dermal Regeneration Template Bilayer (Bovine Collagen And Glycosaminoglycan (Chondroitin-6- Sulfate) And Silicone Layer - Size: 4In X 5In (10Cmx12.5Cm) , Dermal Regeneration Template Bilayer (Bovine Collagen And Glycosaminoglycan (Chondroitin-6- Sulfate) And Silicone Layer - Size: 4In X 10In (10Cmx25cm) , Meshed Dermal Regeneration Template Bilayer - Mesh (Bovine Collagen And Glycosaminoglycan (Chondroitin-6-Sulfate) And Silicone Layer - Size: 2In X 2In (5Cmx5cm) , Meshed Dermal Regeneration Template Bilayer - Mesh (Bovine Collagen And Glycosaminoglycan (Chondroitin-6-Sulfate) And Silicone Layer - Size: 4In X 5In (10Cmx12.5Cm) , Meshed Dermal Regeneration Template Bilayer - Mesh (Bovine Collagen And Glycosaminoglycan (Chondroitin-6-Sulfate) And Silicone Layer - Size: 4In X 10In (10Cmx25cm) , 2 Octyl Cyanoacrylate Adhesive In A Special Aluminium Collapsible Tube Pack ( 2 X 1.75Gm) And Applicator Having Self Puncturing Cap And A Soft Elastomeric Tip (Soft Bristles) For Ease Of Application Along With Curved Mesh Design Of Length 30 Cm Skin Closure System , 2 Octyl Cyanoacrylate Adhesive Having 1 Ml (One Ml)In A Special Aluminium Collapsible Tube Pack And Applicator Having Self Puncturing Cap And A Soft Elastomeric Tip , Silk Protein Based Sterile Surgical Wound Dressing Sheet For Chronic & Acute Wounds. The Silkdressing Should Also Have Below Parameters : 1)Silk Content Should Be More Than 75% 2)Thickness Of Silk Should Be More Than 1.2 Mm 3)Moisturevapor Transmission Rate Should Be 800 G/M2/24Hr Size - 10X10 Cm , Silk Protein Based Sterile Surgical Wound Dressing Sheet For Chronic & Acute Wounds. The Silkdressing Should Also Have Below Parameters : 1)Silk Content Should Be More Than 75% 2)Thickness Of Silk Should Be More Than 1.2 Mm 3)Moisturevapor Transmission Rate Should Be 800 G/M2/24Hr Size - 15X15 Cm , Silk Protein Based Sterile Surgical Wound Dressing Sheet For Infected Wounds. The Silkdressing Should Also Have Below Parameters : 1)Silk Content Should Be More Than 75% 2)Thickness Of Silk Should Be More Than 1.2 Mm 3)Moisturevapor Transmission Rateshould Be 800 G/M2/24Hr. 4) 7 Days Of Silver Releaseand Silver Content Of 1.5Mg/Cm2size - 5X5 Cm , Silk Protein Based Sterile Surgical Wound Dressing Sheet For Infected Wounds. The Silkdressing Should Also Have Below Parameters : 1)Silk Content Should Be More Than 75% 2)Thickness Of Silk Should Be More Than 1.2 Mm 3)Moisturevapor Transmission Rateshould Be 800 G/M2/24Hr. 4) 7 Days Of Silver Releaseand Silver Content Of 1.5Mg/Cm2 Size - 20X20 Cm , Silk Protein Based Sterile Surgical Wound Dressing Sheet For Infected Wounds. The Silkdressing Should Also Have Below Parameters : 1)Silk Content Should Be More Than 75% 2)Thickness Of Silk Should Be More Than 1.2 Mm 3)Moisturevapor Transmission Rateshould Be 800 G/M2/24Hr. 4) 7 Days Of Silver Releaseand Silver Content Of 1.5Mg/Cm2 Size - 30X30 Cm , Hydrophobic Bacteria And Fungi Binding Wound Dressing Pad,Consists Of A Dacc Coated Wound Contact Layer Combined With An Absorbent Core-Size: 10X10 Cm , Hydrophobic Bacteria And Fungi Binding Wound Dressing Pad,Consists Of A Dacc Coated Wound Contact Layer Combined With An Absorbent Core-Size: 10X20 Cm , Non-Absorbent Bacteria And Fungi Binding Wound Contact Layer,Consists Of A Dacc-Coated 8 Folded Wound Contact Layer. Size: 7X10 Cm , Bacteria And Fungi Binding Absorbent Polyurethane Foam With Super-Absorbent Stripes Which Absorb And Lock Additional Wound Exudate With Wound Contact Surface Consists Of A Dacccoated Wound Contact Layer With A Silicon Fixation Border And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour. Size: 10X10 Cm , Bacteria And Fungi Binding Absorbent Polyurethane Foam With Super-Absorbent Stripes Which Absorb And Lock Additional Wound Exudate With Wound Contact Surface Consists Of Adacccoated Wound Contact Layer With A Silicon Fixation Border And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour. Size: 12.5X12.5 Cm , Bacteria And Fungi Binding Absorbent Polyurethane Foam With Super-Absorbent Stripes Which Absorb And Lock Additional Wound Exudate With Wound Contact Surfaceconsists Of Adacccoated Wound Contact Layer With A Silicon Fixation Border And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour. Size: 15X15 Cm , Silicone Coated Absorbent Polyurethane Foam Dressing That Contains Super-Absorbent Stripes Which Absorb And Lock Wound Exudate. With Perforated Silicone Wound Contact Layer With A Silicon Fixation Border And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour And If Necessary The Dressing Can Be Cut To Size.Size: 7Cmx9cm Oval , Silicone Coated Absorbent Polyurethane Foam Dressing That Contains Super-Absorbent Stripes Which Absorb And Lock Wound Exudate. With Perforated Silicone Wound Contact Layer With A Silicon Fixation Border And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour And If Necessary The Dressing Can Be Cut To Size.Size: 12.5Cmx12.5Cm , Silicone Coated Absorbent Polyurethane Foam Dressing That Contains Super-Absorbent Stripes Which Absorb And Lock Wound Exudate. With Perforated Silicone Wound Contact Layer And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour And If Necessary The Dressing Can Be Cut To Size.Size: 10Cmx10cm , Silicone Coated Absorbent Polyurethane Foam Dressing That Contains Super-Absorbent Stripes Which Absorb And Lock Wound Exudate. With Perforated Silicone Wound Contact Layer And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour And If Necessary The Dressing Can Be Cut To Size.Size: 10Cmx20cm , Anatomically Heel Shaped Silicone Coated Absorbent Polyurethane Foam Dressing That Contains Super-Absorbent Stripes Which Absorb And Lock Wound Exudate. With Perforated Silicone Wound Contact Layer And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour And If Necessary The Dressing Can Be Cut To Size. Size: 16Cmx24cm , Anatomically Heel Shaped Silicone Coated Absorbent Polyurethane Foam Dressing That Contains Super-Absorbent Stripes Which Absorb And Lock Wound Exudate. With Perforated Silicone Wound Contact Layer And Water-Repellent Outer Film, Yet Permeable To Oxygen And Vapour And If Necessary The Dressing Can Be Cut To Size And With Two Fixation Strips Are Placed In The Peel Pouch Meant For Fixation Of The Dressing To The Heel. , Knee High Open Toe Gradient Compression Stockings With A Decreasing Pressure Gradient From Distal To Proximal With Effective Moisture Wicking Technology Contains 40% Elastane And 60% Polyamide Of Innovative Nilit Aquarius Fibers Wick Away Moisture And Give A Feeling Of Comfort All Day Long - Extra Large , Knee High Open Toe Gradient Compression Stockings With A Decreasing Pressure Gradient From Distal To Proximal With Effective Moisture Wicking Technology Contains 40% Elastane And 60% Polyamide Of Innovative Nilit Aquarius Fibers Wick Away Moisture And Give A Feeling Of Comfort All Day Long - Large , Knee High Open Toe Gradient Compression Stockings With A Decreasing Pressure Gradient From Distal To Proximal With Effective Moisture Wicking Technology Contains 40% Elastane And 60% Polyamide Of Innovative Nilit Aquarius Fibers Wick Away Moisture And Give A Feeling Of Comfort All Day Long - Medium , Thigh High Open Toegradient Compression Stockings With A Decreasing Pressure Gradient From Distal To Proximal With Effective Moisture Wicking Technology Contains 40% Elastane And 60% Polyamide Of Innovative Nilit Aquarius Fibers Wick Away Moisture And Give A Feeling Of Comfort All Day Long With An Silicon Impregrantedthigh Band- Extra Large , Thigh High Open Toegradient Compression Stockings With A Decreasing Pressure Gradient From Distal To Proximal With Effective Moisture Wicking Technology Contains 40% Elastane And 60% Polyamide Of Innovative Nilit Aquarius Fibers Wick Away Moisture And Give A Feeling Of Comfort All Day Long With An Silicon Impregrantedthigh Band- Large , Thigh High Open Toegradient Compression Stockings With A Decreasing Pressure Gradient From Distal To Proximal With Effective Moisture Wicking Technology Contains 40% Elastane And 60% Polyamide Of Innovative Nilit Aquarius Fibers Wick Away Moisture And Give A Feeling Of Comfort All Day Long With An Silicon Impregrantedthigh Band- Medium , Compression System With Two Components, A Medical Stockingwith 76% Polyamide And A Compression Liner With 79% Polyamide And 5% Silk, Provide A Nominal Compression Of 40 Mmhg* At The Ankle With Decreasing Pressure Gradient From Distal To Proximal -Large , Compression System With Two Components, A Medical Stockingwith 76% Polyamide And A Compression Liner With 79% Polyamide And 5% Silk, Provide A Nominal Compression Of 40 Mmhg* At The Ankle With Decreasing Pressure Gradient From Distal To Proximal - Extra Large , Compression System With Two Components, A Medical Stockingwith 76% Polyamide And A Compression Liner With 79% Polyamide And 5% Silk, Provide A Nominal Compression Of 40 Mmhg* At The Ankle With Decreasing Pressure Gradient From Distal To Proximal - Medium , Leg Wrap Withshort Stretch Adjustable Compression Band System With 50% Overlapping Wraps Contains 82% Polyamide And 18% Elastane Along With Non-Compressive Linerscontains 96% Polyamide And 4% Elastane , Foot Wrap Withshort Stretch Adjustable Compression Band System With 50% Overlapping Wraps Contains 82% Polyamide And 18% Elastanealong With Non-Compressive Linerscontains 96% Polyamide And 4% Elastane , Knee Wrap Withshort Stretch Adjustable Compression Band System With 50% Overlapping Wraps Contains 82% Polyamide And 18% Elastane With Non-Compressive Linerscontains 96% Polyamide And 4% Elastane , Multipurpose Tube Holder For Foley Catheters , Polyurethane Foam Mattress 23 Density 72X36 Mm (In Rolls) , Microcuff Endotracheal Tube (Oral, Curved) Forpediatrics -Size 4 Mm , Laparotomy Drape , Craniotomy Drape , Surgeon Gown (Large Size) Which Is A Fully Wrap Around Variety And Can Be Tied In Front, With Water, Alcohol Resistance. Outer Layer Spun Bound Repellant Layer With Inner Two Layers With Antibacterial Property (Melt Blown), And Innermost Layer For Fabric Strength (Spun Bound) Soft Elastic Wrist Cuff. Adjustable Neck Line Needed. Low Linting. Sample Absolutely Required. Must Meet Or Exceed Enl3795 Standards Or Else Will Not Be Considered. Quote Separately For Tape Covered Double-Stitched Seam Type Gown As Well As The One With Ultrasound Bonded Seam , Endotracheal Tube With Polyurethane Cuff (Size: 5.0, 5.5, 6.0,6.5) (Pack Of 10) , Endotracheal Tube With Polyurethane Cuff (Size: 2.5, 4.5)(Pack Of 10) , Oxygen Mask Without Nebulizer - Adult , Oxygen Mask Without Nebulizer - Pediatrics , Dial Flow (I.V. Infusion Dial Regulator) Flow Rates From 20 To 250Ml / Hr; Stable Flow Rates Upto 72 Hrs; Reliable And Accurate Flow Control; Dial With Ridges For Easy Grippingand Adjustment , Nrbm Face Mask With Reservoir Bag - Adult , Bacterial Filter , Oral Airway , T-Piece Connector , Catheter Mount , Ventilator Circuit , Burette Set , Microscope Cover - Medium Compatible With Leica M525 Mc1 , Microscope Cover - Medium Compatible With Carl Zeiss , Glycolic Acid Peels For Scar Treatment 20% - 100Ml , Glycolic Acid Peels For Scar Treatment 35% - 100Ml , Glycolic Acid Peels For Scar Treatment 50% - 100Ml , Glycolic Acid Peels For Scar Treatment 75% - 100Ml , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Round 150 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes -Round 210 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Round 310 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Round 400Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Rectangular 170 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Rectangular 250 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Rectangular 260 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Rectangular 300 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Rectangular 350 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Elliptical 150Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Elliptical 250 Cc , Tissue Expanders With Injection Port And Stainless Steel Connector Of Various Sizes And Shapes - Elliptical 125 Cc , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 1.5 X 2H With Gap , Titaniumlow Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 1.5 X 4H With Gap , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 1.5 X 4H Without Gap , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 1.5 X 6H With Gap , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 1.5 X 6H Without Gap , Titanium Low Profile Plates (Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 1.5 X 4H- L Right , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 1.5 X 4H- L Left , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 1.5 X 5H- L Lt & Rt , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Orbital Plate Short Bar 0.6 Mm Thicknessscrew 1.5 Mm4/6 Holes , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 0.6 Mm 8 Holed Without Gap , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 0.6 Mm 12 Holed Without Gap , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 0.6 Mm 16 Holed Without Gap , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 0.6 Mm 24 Holed Without Gap , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 0.8 Mm 10 Holes , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 0.8 Mm 12 Holes , Titanium Low Profile Plates(Plate Thickness 0.6 Mm Screw Diameter 1.5 Mm)For Craniofaciomaxillary Surgery - Mini Plate 0.8 Mm 16 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - L Plate Right Angle Short 1Mm 6 Holes Left , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - L Plate Right Angle Short 1Mm 6 Holes Right , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - L Plate Right Angle Long1mm6 Holes Right , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - L Plate Right Angle Long 1Mm6 Holes Left , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - L Plate Right Angle1mm Long5 Holes Right , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - L Plate Right Angle1mm Long5 Holes Left , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate4 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate 6 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate 8 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate 12 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate16 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate 20 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate With Bar 2 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate With Bar 4 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Mini Plate With Bar 6 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Y Plate 1 Mm 4 Holes Short , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Y Plate 1 Mm 4 Holes Long , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - Double Y Platebroad 1 Mm6 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - T Plate 1 Mm 4 Holes , Titanium High Profile Plates(Plate Thickness 1.0 Mm Screw Diameter 2.0 Mm) - X Plate 1 Mm5 Holes , Titanium Reconstruction Plates (Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate With Angleright 16 Holes , Titanium Reconstruction Plates(Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate With Angleleft 16 Holes , Titanium Reconstruction Plates(Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate With Angleright 20 Holes , Titanium Reconstruction Plates(Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate With Angleleft 20 Holes , Titanium Reconstruction Plates(Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate With Angleright 24 Holes , Titanium Reconstruction Plates(Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate With Angleleft 24 Holes , Titanium Reconstruction Plates(Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate - Straight - 16 Holes , Titanium Reconstruction Plates(Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate Straight - 20 Holes , Titanium Reconstruction Plates(Plate Thickness 2Mm, Screw Diameter 2Mm) - Reconstruction Plate - Straight - 24 Holes , Titanium Screws For Kls Martin System1.5 X 4Mm (To Be Supplied With Screwdriver) , Titanium Screws For Kls Martin System1.5 X 6Mm(To Be Supplied With Screwdriver) , Titanium Screws For Kls Martin System1.5 X 8Mm (To Be Supplied With Screwdriver) , Titanium Screws For Kls Martin System1.5 X 10Mm (To Be Supplied With Screwdriver) , Titanium Screws For Kls Martin System1.5 X 12Mm (To Be Supplied With Screwdriver) , Titanium Screws For Kls Martin System 2Mm X 4Mm(To Be Supplied With Screwdriver) , Titanium Screws For Kls Martin System 2Mm X 6Mm(To Be Supplied With Screwdriver) , Titanium Self Drilling Screws 1.5 Mm , Length 4 Mm (Pack Of 1 Unit) , Titanium Self Drilling Screws 1.5 Mm , Length 5 Mm (Pack Of 1 Unit) , Self Drilling Screws 1.5 Mm Length 8 , Self Drilling Screws 2 Mm Length 4 , Self Drilling Screws 2 Mm Length 6 , Self Drilling Screws 2 Mm Length 8 , Titanium Midfacial (Outer Diameter 1.5Mm) Self-Tapping Screw-6 Mm Length (Pack Size - 1 No) , Titanium Mandible (Outer Diameter 2Mm) Self-Tapping Screw-6 Mm Length (Pack Size - 1 No) , Titanium Mandible (Outer Diameter 2Mm) Self-Tapping Screw-8 Mm Length (Pack Size - 1 No) , Titanium Reconstruction (Outer Diameter 2.3/2.4Mm) Self-Tapping Screw-10 Mm Length (Pack Size - 1 No) , Titanium Reconstruction (Outer Diameter 2.3/2.4Mm) Self-Tapping Maxi Screw-12 Mm Length (Pack Size - 1 No) , Breast Implant Insertion Device- Funnel Constructed Of A Flexible, Transparent, Polymeric Filmthat Accommodates A Variety Of Gel Breast Implant Shapes And Sizes , External Mandibular Distractors Unidirectional , External Mandibular Distractors Bidirectional , Intraoral Mini Distractors For Mandible Right 10Mm(Titanium) , Intraoral Mini Distractors For Mandible Right 15Mm (Titanium) , Intraoral Mini Distractors For Mandible Right 20Mm (Titanium) , Intraoral Mini Distractors For Mandible Right 25Mm (Titanium) , Intraoral Mini Distractors For Mandible Left 10Mm (Titanium) , Intraoral Mini Distractors For Mandible Left 15Mm (Titanium) , Intraoral Mini Distractors For Mandible Left 20Mm (Titanium) , Intraoral Mini Distractors For Mandible Left 25Mm (Titanium) , Intraoral Mini Distractors Vertical For Alveolar 2+2 Holes 3+3 Holes (Titanium) , Intraoral Mini Distractors For Maxilla Left (Titanium) , Intraoral Mini Distractors For Maxilla Right (Titanium) , Drill Bits 1.2/1.3 Mm Flute With Stop/Guard - Short , Drill Bits 1.2/1.3 Mm Flute With Stop/Guard - Long , Drill Bits 1.4/1.5 Mm Flute With Stop/Guard - Short , Drill Bits 1.4/1.5 Mm Flute With Stop/Guard - Long , Drill Bits 1.6 Mm Flute With Stop/Guard - Short , Drill Bits 1.6 Mm Flute With Stop/Guard - Long , Drill Bits 1.8 Mm Flute With Stop/Guard - Short , Drill Bits 1.8 Mm Flute With Stop/Guard - Long , Drill Bits 2.3 Mm Flute With Stop/Guard - Short , Drill Bits 2.3 Mm Flute With Stop/Guard - Long , Drill Bits 1.2/1.3 Mm Flute , Drill Bits 1.4/1.5 Mm Flute , Drill Bits 1.6 Mm Flute , Drill Bits 1.8 Mm Flute , Drill Bits 2.3 Mm Flute , Electric Dermatome Blades For Zimmer Dermatome , Acellular Dermal Matrix For Grafting/Implant Size: 2X2cm - Thick , Acellular Dermal Matrix For Grafting/Implant Size: 4X6cm - Thick , Acellular Dermal Matrix For Grafting/Implant Size: 8X16cm - Thick , Microscope Handle Drapes (180 X 330) , Sheathed Microtip Cautery Tips 4 Cm Straight (3/32”) Sleeve , Sheathed Microtip Cautery Tips 3 Cm Straight (3/32”) Sleeve , Bipolar Forceps Curved Type Bend 4 Tip 2 Mm For Bipolar Diathermy , Bipolar Forceps Straight 5 Tip 2Mm For Bipolar Diathermy , Bipolar Forceps Straighttip Bend 6Tip 2Mmfor Bipolar Diathermy , Bipolar Rf Cable For Bipolar Diathermy , Varispeed Battery Pack For Resorbable Implant System Strykar Delta System , Plates & Meshes For Resorbable Implant System Strykar - Straight Plate, 14 Holes, 1.4 Mm Thick , Plates & Meshes For Resorbable Implant System Strykar - Straight Plate, 21 Holes, 1.4 Mm Thick , Plates & Meshes For Resorbable Implant System Strykar - Straight Plate, 2 X 21 Holes, 1.4 Mm Thick , Plates & Meshes For Resorbable Implant System Strykar - Straight Plate, 2 X 21 Holes, 0.5 Mm Thick , Plates & Meshes For Resorbable Implant System Strykar - Straight Plate, 3 X 21 Holes, 0.5 Mm Thick , Plates & Meshes For Resorbable Implant System Strykar - Delta System, Ladder Plate, 2X 5 Holes , Plates & Meshes For Resorbable Implant System Strykar - Delta System Resorb Straight Plate 14 Holes , Plates & Meshes For Resorbable Implant System Strykar - Mesh 55 X 55 X 1.0 Mm , Plates & Meshes For Resorbable Implant System Strykar - Mesh 55 X 55 X 1.4 Mm , Plates & Meshes For Resorbable Implant System Strykar - Delta System Mesh- 55 X 55Mm , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- Delta System, 1.7 X 4Mm Screw, Pkg. 10 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- Delta System, 1.7 X 5Mm Screw, Pkg. 10 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 1.7 X 4 Mm, Pkg. 4 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 1.7 X 5 Mm, Pkg. 4 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 1.7 X 6 Mm, Pkg. 4 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 2.2 X 4 Mm, Pkg. 2 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 2.2 X 6 Mm, Pkg. 2 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 2.6 X 4 Mm, Pkg. 2 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 2.6 X 6 Mm, Pkg. 2 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 2.6 X 8 Mm, Pkg. 2 , Screws Sizesfor Resorbable Implant System Strykar Delta Implant- 2.6 X 10 Mm, Pkg. 2 , Plate Holders & Cuttersfor Resorbable Implant System Strykar - 1.7 Mm Bone Tap , Plate Holders & Cuttersfor Resorbable Implant System Strykar - 2.2 Mm Bone Tap , Self-Holding Screws Drivers/Driver Bitsfor Resorbable Implant System Strykardelta System - 1.7 Mm Screwdriver Blade, 80 Mm , Taps (Ranging From 1.3 Mm To 4 Mm)For Resorbable Implant System Strykar Delta System - Self-Drilling Tap 1.7 Mm, 3 & 4 Mm, Dent , Taps (Ranging From 1.3 Mm To 4 Mm)For Resorbable Implant System Strykar Delta System - Self-Drilling Tap 1.7 Mm, 5 & 6 Mm, Dent , Taps (Ranging From 1.3 Mm To 4 Mm)For Resorbable Implant System Strykar Delta System - Self-Drilling Tap 2.2 Mm, 4 Mm, Dent , Taps (Ranging From 1.3 Mm To 4 Mm)For Resorbable Implant System Strykar Delta System - Self-Drilling Tap 2.2 Mm, 6 Mm, Dent , K- Wire 0.8 Mm Dia6 Length , K- Wire 1.2 Mm Dia6 Length , K- Wire 1.5 Mm Dia6 Length , K- Wire 1.6 Mm Dia6 Length , K- Wire 1.0 Mm Dia12 Length , K- Wire 1.2 Mm Dia12 Length , K- Wire 1.5 Mm Dia12 Length , Adsons Fine Toothed Forceps With 2Mm Fine Tip (Comfort Of Surgeon For Prolonged Handling Will Be Used As Selection Criteria) , Beaver Handles Round, Knurled, Stainless 10.0 Cm L X 0.50 Cm D , Beaver Handles Round, Knurled, Stainless 13.0 Cm L X 0.50 Cm D , Fine Toothed Forceps , Fine Tip Right Angled Forceps , Kilner Dott Mouth Gag With Three Blades (Set Of 2) - Pediatric Size , Mc Donalds Dissecting Forceps (For Lip) Fine - 1Mm , Skin Graft Blade For Humbys Knife , Ssg Handle (Humbys) , Skin Hook (Single) , Skin Hook - Fine (Single) , Scalpel Blade Remover , Thudiccum Nasal Speculum (All Sizes Each) , Zygoma Elevator , Langenbeck Retractor , Non-Stick Bipolar Cable , Non-Stick Bipolar Forceps Fine Tips - Small , Non-Stick Bipolar Forceps Fine Tips - Medium , Non-Stick Bipolar Forceps Fine Tips - Large , Non-Stick Bipolar Forceps Fine Tips - Angled , Proctoscope - Small , Proctoscope - Medium , Proctoscope - Large , Bayonet Forceps , Dissecting Forceps (Toothed)-12 Cm , Dissecting Forceps (Non-Toothed)-12 Cm , Mosquito Forceps - Straight - 12 Cm , Mosquito Forceps - Curved - 12 Cm , Iris Scissors - Straight -12 Cm , Iris Scissors - Curved -12 Cm , Acrylic -Heat Cure-Clear (Pack 450Gm Powder & 275Ml Liquid) , Acrylic -Heat Cure-Pink (Pack 450Gm Powder & 275Ml Liquid) , Acrylic -Self Cure-Clear (Pack 400Gm Powder & 400Ml Liquid) , Acrylic -Self Cure-Pink (Pack 400Gm Powder & 400Ml Liquid) , Alginate Impression Material (Dustless) Pack Of 750Gm , Carborundum Discs (For Mandrel Mount) - Pack Of 10 , Cold Mount Seal (Pack Of 450Ml) , Dappen Dish (Pack Size - 1 No.) , Dental Stone (Pack Of 3 Kg) , Die Stone (Pack Of 3 Kg) , Disc Mandrel (Pack Size - 1 No.) , Modelling Wax Sheet No.2 (Pack Of 10 Sheets) , Mouth Mirror With Handle (Pack Size - 1 No.) , Plaster Of Paris (Type Ii) (Pack Of 5 Kgs) , Polishing Buff For Dental Lathe (Pack Size - 1 No.) , Pumice Powder For Polishing Dentures (Pack Of 2 Kg) , Sandpaper Mandrel (Pack Size - 1 No.) , Soft Putty Impression Material (Pack Of 450Ml Soft Putty And 180Ml Light Body) , Stainless Steel Wire- 26 Guage (Pack Size - 1 No.) , Stainless Steel Wire- 32 Guage (Pack Size - 1 No.) , Vulcanite Trimmer (Tc) (Pack Size - 1 No.) , Micromotor Straight Handpiece For Use With Surgical Burs And Cutters Should Carry Standard/Ce Certified.Warranty - 2 Years (Pack Size - 1 No.) , Adams Plier (Pack Size - 1 No.) , Cheek Retractor - Clear (Pair Of 2) , Plier Stand - Stainless Steel (Pack Size - 1 No.) , Tweed Loop Forming Plier (Pack Size - 1 No.) , Elastics - Red (Pack Of 1000) , Elastics - 3/16-4.5 Oz. (Pack Of 1000) , Orthodontic Plastic Model Bases (Pack Size - 1 No.) , Orthodontic Stone (3Kg Pack) , Stainless Steel Wire - 0.7Mm (Spool Of 500Gms) , Anodised Aluminium Tray With Mat And Continuous Holders - Dimensions:9X7x1.25 , Micro Jewellers Forcepsstraight - Matte Finish 6 Length(Comfort Of Surgeon For Prolonged Holding, Ability Of Tip To Hold Both Microneedle And Microsuture Will Be Used As Selection Criteria) , Micro Jewellers Forceps Angled - Matte Finish 6 Length, Less Than 5Mm Angled Arm With Less Than 1Mm Tip(Comfort Of Surgeon For Prolonged Holding, Ability Of Tip To Hold Both Microneedle And Microsuture Will Be Used As Selection Criteria) , Micro Jewellers Forcepscurved - Matte Finish 0.2Mm Tip(Comfort Of Surgeon For Prolonged Holding, Ability Of Tip To Hold Both Microneedle And Microsuture Will Be Used As Selection Criteria) , Micro Needle Holder - Curved - 6 Length 0.6 Mm Wide Jaw- Castroveijo Type Without Lock (Comfort Of Surgeon For Prolonged Holding, Ability Of Tip To Hold Both Microneedle And Microsuture Will Be Used As Selection Criteria) , Micro Needle Holder Castroveijo Type Without Lock Straight - 15 Cm , Vessel Clamps (Single Pair) - 2A , Vessel Clamps (Single Pair) - 2V , Vessel Clamps (Single Pair) - 3A , Vessel Clamps (Single Pair) - 3V , Vessel Clamps (Single Pair) - 4A , Vessel Clamps (Single Pair) - 4V , Tenotomy Scissors - 5/6 Curved , Tenotomy Scissors Long - 10-12 Curved , Tenotomy Scissors Long - 8 Curved , Titanium Vessel Dilator, Angled, 0.2Mm Tip , Titanium Vessel Dilator, Straight, 0.2Mm Tip , Titanium Vessel Dilator, Short Model , Micro Ring Forceps, 6 , Micro Vessel Dilator, Long Model, Straight, Matt Finish , Micro Vessel Dilator Forceps, Parallel Flattened With Round Handle, Straight, 5/6 Inch Length 0.6-1Mm Wide Tip (0.2Mm Tip) , Micro Scissors 5/6 , Straight, Blunt Tip, Round Handle Castroviejo Type , Micro Scissors 5/6 , Curved, Blunt Tip, Round Handle Castroviejo Type , Micro Scissors 5/6 , Straight, Sharp Tip, Round Handle Castroviejo Type , Micro Scissors 5/6 , Curved, Sharp Tip, Round Handle Castroviejo Type , Mixter Right Angled Forceps (Set Of 3) , Titanium Micro Forceps With Platform, 15 Cm Long , Sterilizer Box With 1 Silicon Mat , Ss Beaker With Silicon Mat , Orthopedic T-Handle , Insulated Bipolar Forceps, Adson, Fine Tip 5 (Autoclavable And Reusable, Non-Stick) , Insulated Bipolar Forceps, Adson, Fine Tip 6 (Autoclavable And Reusable, Non-Stick) , Insulated Bipolar Forceps, Bayonet, Fine Tip 6 (Autoclavable And Reusable, Non-Stick) , Insulated Bipolar Forceps, Adson, Fine Tip 5 (Autoclavable And Reusable) , Insulated Bipolar Forceps, Fine Tip 6 (Autoclavable And Reusable) , Insulated Bipolar Forceps, Bayonet, Fine Tip 6 (Autoclavable And Reusable) , Debakey Medium Vascular Size Forceps 6 , Bulldog Clamps, Atraugrip Jaws, Straight - 1Mm/2Mm Tip , Bulldog Clamps, Atraugrip Jaws, Angled - 1 Mm/2 Mm Tip , Bulldog Clamps, Atraugrip Jaws, Curved - 1 Mm/2 Mm Tip , Vessel Anastomotic Coupler- 1 Mm , Vessel Anastomotic Coupler- 1.5 Mm , Vessel Anastomotic Coupler- 2 Mm , Vessel Anastomotic Coupler- 2.5 Mm , Vessel Anastomotic Coupler- 3 Mm , Vessel Anastomotic Coupler- 3.5 Mm , Vessel Anastomotic Coupler- 4 Mm , Bulldog Disposable Vascular Clamps-Small , Bulldog Disposable Vascular Clamps-Medium , Liga Clips Micro Clips , Liga Clips Medium , Liga Clips Small , Coupler Forceps , Vessel Measuring Gauge , Fine Suction Nozzle - Size : 2 And 3 , Alar Retractor , Vessel Dilator - 0.2 Mm Tip Straight , Vessel Clamp Applicator , Micro Clamps Applicators (Forceps), 6 Long, Matt Finish (Should Be Compatible With The Vessel Clamps Provided) , Pediatric Mosquito Artery , Needle Holder Medium & Fine Tip (1Mm/2Mm) , Needle Holder Fine -12 Cm , B.P. Handle No. 3 , Head Base Ring Gel Pad - Adult Size , Head Base Ring Gel Pad - Pediatric Size , Head Base Gel Pad- Adult Size , Head Base Gel Pad- Pediatric Size , Head Neck Base Gel Pad- Adult Size , Sacral Pad- Adult Size , Heel Pad- Adult Size , Horseshoe Gel Pad Without Base - Adult Size , Knee/Arm Rest Gel Pad - Adult Size , Knee/Arm Rest Gel Pad - Pediatric Size , Gel Prone Head Rest , Chest Roll Gel Pad (Dome Positioner Prime)- Adult Size , Chest Roll Gel Pad (Dome Positioner Prime)- Pediatric Size , Universal Gel Pillows - Adult Size , Universal Gel Pillows - Pediatric Size , Neonatal Roll - Should Contain Different Sizes , Pediatric Roll- Should Contain Different Sizes , Human Acellular Matrix Preserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration.Thickness 0.2-1Mm. Meshed Size (Cm) 2X2cm , Human Acellular Matrix Preserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration.Thickness 0.2-1Mm. Meshed Size (Cm) 3X3cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration. Thickness 0.2-1Mm. Meshed Size (Cm) 4X4cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration. Thickness 0.2-1Mm. Meshed Size (Cm) 5X7cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration. Thickness 0.2-1Mm. Meshed Size (Cm) 6X7cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration. Thickness 0.2-1Mm. Meshed Size (Cm) 4X8cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration. Thickness 0.2-1Mm. Meshed Size (Cm) 5X9cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration. Thickness 0.2-1Mm. Unmeshed Size (Cm) 2X2cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration.Thickness 0.2-1Mm. Unmeshed Size (Cm) 4X4cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration. Thickness 0.2-1Mm. Unmeshed Size (Cm) 5X7cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration.Thickness 0.2-1Mm. Unmeshed Size (Cm) 6X7cm , Human Acellular Matrixpreserved In Propriety Glycerol Based Solution With More Than 97% Of Donor Dna Removed & Sterility Assurance Level Of 10-6. Facilitating Recipient Cellular Infiltration And Revascularization. Biohospitable & Ready To Use Without Rehydration.Thickness 0.2-1Mm. Unmeshed Size (Cm) 4X8cm , Disposable Negative Pressure Wound Therapy Kit With Multilumen Tubing And Peri Wound Protection Layer- Size: Small 1) Should Contain Hydrophobic Pu Foam Size: 11Cm X 8Cm X 3Cmadhesive Drapes 2) Should Contain Multilumen Tubing, Connector, Clamp And Tube Holder 3) Should Contain Repositionable Peri-Wound Protection Layer , Disposable Negative Pressure Wound Therapy Kit With Multilumen Tubing And Peri Wound Protection Layer- Size: Medium 1) Should Contain Hydrophobic Pu Foam Size: 17Cm X 15Cm X 3Cm Adhesive Drapes 2) Should Contain Multilumen Tubing, Connector, Clamp And Tube Holder 3) Should Contain Repositionable Peri-Wound Protection Layer , Disposable Negative Pressure Wound Therapy Kit With Multilumen Tubing And Peri Wound Protection Layer- Size: Large 1) Should Contain Hydrophobic Pu Foam Size: 26Cm X 15Cm X 3Cm Adhesive Drapes 2) Should Contain Multilumen Tubing, Connector, Clamp And Tube Holder 3) Should Contain Repositionable Peri-Wound Protection Layer , Negative Pressure Wound Therapy Dressing With Instillation 1) Containing Multilayer Hydrophobic And Hydrocellular Foam Dressings-Size: Small (7.5Cm X 10Cm X 1.6Cm)X1 And (7.5Cm X 10Cm X 1Cm)X1 And Adhesive Drapes 2) Should Contain Multi-Lumen Tubing, Connector, Clamp And Tube Holder 3) Should Contain Repositionable Peri-Wound Protection Layer , Negative Pressure Wound Therapy Dressing With Instillation 1) Containing Multilayer Hydrophobic And Hydrocellular Foam Dressings-Size:Medium (12.5 X 18 X 1.6Cm)X1 And (12.5 X 18 X 1Cm)X1 And Adhesive Drapes 2) Should Contain Multi-Lumen Tubing, Connector, Clamp And Tube Holder 3) Should Contain Repositionable Peri-Wound Protection Layer , Negative Pressure Wound Therapy Dressing With Instillation 1) Containing Multilayer Hydrophobic And Hydrocellular Foam Dressings-Size: Large ( 26Cm X 15Cm X 1.6Cm)X1 And (26Cm X 15Cm X 1Cm)X1 And Adhesive Drapes 2) Should Contain Multi-Lumen Tubing, Connector, Clamp And Tube Holder 3) Should Contain Repositionable Peri-Wound Protection Layer , Negative Pressure Wound Therapy Cansiter 500Ml And Instillation Head Connector For Instillation Therapy System- 1) Should Contain 500Ml Container With Multilumen Tubing & Clamp 2) Should Contain Instillation Flow Tracker /Irrigation Head/ Casette , Dynamic Incision Management Kit (Size: 4.5Cm X 20Cm) Compatible With Palm Size Dynamic Incision Management System 1)Should Contain Hydrophobic Pu Foam Peel And Place Dressing 2)Low Adherent Soft Silicon Contact Layer With Additional (Adhesive) Fixation Strips 3)Should Be Compatible With Palm Sized Negative Pressure Incision Wound Management Device (Light Weight Device Upto 200G) With Atleast 4 Pressure Settings (-50Mmhg To -125Mmhg) 4)Should Be Compatible With 100Ml-150Ml Canister , Dynamic Incision Management Kit (Size: 4.5Cm X 25Cm) Compatible With Palm Size Dynamic Incision Management System 1)Should Contain Hydrophobic Pu Foam Peel And Place Dressing 2)Low Adherent Soft Silicon Contact Layer With Additional (Adhesive) Fixation Strips 3)Should Be Compatible With Palm Sized Negative Pressure Incision Wound Management Device (Light Weight Device Upto 200G) With Atleast 4 Pressure Settings (-50Mmhg To -125Mmhg) 4)Should Be Compatible With 100Ml-150Ml Canister , Dynamic Incision Management Kit (Size: 4.5Cm X 30Cm) Compatible With Palm Size Dynamic Incision Management System 1)Should Contain Hydrophobic Pu Foam Peel And Place Dressing 2)Low Adherent Soft Silicon Contact Layer With Additional (Adhesive) Fixation Strips 3)Should Be Compatible With Palm Sized Negative Pressure Incision Wound Management Device (Light Weight Device Upto 200G) With Atleast 4 Pressure Settings (-50Mmhg To -125Mmhg) 4)Should Be Compatible With 100Ml-150Ml Canister , Dynamic Incision Management Kit (Size: 4.5Cm X 35Cm) Compatible With Palm Size Dynamic Incision Management System 1)Should Contain Hydrophobic Pu Foam Peel And Place Dressing 2)Low Adherent Soft Silicon Contact Layer With Additional (Adhesive) Fixation Strips 3)Should Be Compatible With Palm Sized Negative Pressure Incision Wound Management Device (Light Weight Device Upto 200G) With Atleast 4 Pressure Settings (-50Mmhg To -125Mmhg) 4)Should Be Compatible With 100Ml-150Ml Canister , Dynamic Ulcer Management Kit (Size: 14Cm X 12Cm) Compatible With Palm Size Dynamic Incision Management System 1)Should Contain Hydrophobic Pu Foam Peel And Place Dressing 2)Low Adherent Soft Silicon Contact Layer With Additional (Adhesive) Fixation Strips 3) Should Be Compatible With Palm Sized Negative Pressure Incision Wound Management Device (Light Weight Device Upto 200G) With Atleast 4 Pressure Settings (-50Mmhg To -125Mmhg) 4) Should Be Compatible With 100Ml-150Ml Canister , Dynamic Ulcer Management Kit (Size: 15Cm X 17.5Cm) Compatible With Palm Size Dynamic Incision Management System 1)Should Contain Hydrophobic Pu Foam Peel And Place Dressing 2)Low Adherent Soft Silicon Contact Layer With Additional (Adhesive) Fixation Strips 3) Should Be Compatible With Palm Sized Negative Pressure Incision Wound Management Device (Light Weight Device Upto 200G) With Atleast 4 Pressure Settings (-50Mmhg To -125Mmhg) 4) Should Be Compatible With 100Ml-150Ml Canister , Container With Gel For Palm Size Dynamic Incision Management System (150Ml) 1) Transparent Container With Gel To Collect Exudate 2) Should Be Compatible With Palm Sized Negative Pressure Incision Wound Management Device (Light Weight Device Upto 200G) With Atleast 4 Pressure Settings (-50Mmhg To -125Mmhg) 3) Should Be Compatible With Dynamic Incision Management Kits , Mini Sagittal Saw Compatible With Stryker Handpiece For Craniotomy , Three Pin Head Rest For Craniotomy , Mayfield Horseshoe Headrest - Adult For Craniotomy , Mandible Bone Holding Reduction Clamp Serrated With Ratchet (Basic Bone Plating Instrument Set) , Straight Cutting Pliers - 6 Length, 2/3 Mm Wide Tip(Basic Bone Plating Instrument Set) , Bone Elevator Hoffmann Type 6 Mm (Basic Bone Plating Instrument Set) , Bone Elevator Hoffmann Type 8 Mm(Basic Bone Plating Instrument Set) , Fine Osteotome - Curved 2 Mm (For Rhinoplasty) , Fine Osteotome - Curved 4 Mm (For Rhinoplasty) , Fine Osteotome - Straight 2 Mm (For Rhinoplasty) , Fine Osteotome - Straight 4 Mm(For Rhinoplasty) , Neiverts Guarded Osteotome - Right (For Rhinoplasty) , Neiverts Guarded Osteotome - Left (For Rhinoplasty) , Guarded Osteotome Straight (For Rhinoplasty) , Guarded Osteotome Curved (For Rhinoplasty) , Joseph Bone Rasp - Cross-Serrated (For Rhinoplasty) , Joseph Bone Rasp - Double Action (For Rhinoplasty) , Cottles Glabella Rasp (For Rhinoplasty) , Mcindoes Double-Ended Periosteal Elevator (For Rhinoplasty) , Aufritch Nasal Dorsal Retractor (For Rhinoplasty) , Aschs Septal Forceps (For Rhinoplasty) , Walshams Nasal Forceps - Adult (For Rhinoplasty) , Walshams Nasal Forceps- Paediatric (For Rhinoplasty) , Tessier Osteotomes Straight 2 Mm(For Osteotomy) , Tessier Osteotomes Straight 5 Mm (For Osteotomy) , Tessier Osteotomes Straight 10Mm (For Osteotomy) , Tessier Osteotomes Straight 15 Mm (For Osteotomy) , Tessier Osteotomes Curved 2 Mm(For Osteotomy) , Tessier Osteotomes Curved 5 Mm(For Osteotomy) , Tessier Osteotomes Curved 10 Mm (For Osteotomy) , Fine Chisels Straight 2 Mm (For Osteotomy) , Fine Chisels Straight 4 Mm (For Osteotomy) , Fine Chisels Straight 6 Mm (For Osteotomy) , Fine Chisels Curved 2 Mm (For Osteotomy) , Fine Chisels Curved 4 Mm (For Osteotomy) , Fine Chisels Curved 6 Mm (For Osteotomy) , Pterygoid Osteotome 5 Mm (For Osteotomy) , Pterygoid Osteotome 10 Mm (For Osteotomy) , Pterygoid Osteotome Curved (Lefort) 1Mm, 2Mm , Bone Cutting Forceps Double Action Curved (For Osteotomy) , Arm Boardcompatible With Dr Lite Model 7000 Sb , Arm Rest For Lateral Position Compatible With Dr Lite Model 7000 Sb , Silicon Head Ring - Adult , Silicon Head Ring - Pediatrics , Fine Tendon Hook , Cats Paw Skin Retractor. , Roberts Artery Forceps , Babcock 6 Tissue Holding Forceps , Pds Plate , Russian Artery Forceps , Microinstrument Set Sterlising Case ( 20 Cm X 12 Cm) , Vessel Loop (Fine) , Micro Clip Applicator
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 34
29.
Rural Development #11314838 AOC
Tender For Construction Of 01 No. E Type quarter At Phc Tainsi- 1 Earth work excavation in foundation hard soil including moorum, stoney earth mixed with boulders with all leads and lifts including dressing and levelling the bed and depositing the excavated earth away from the work site with all leads and lifts including cost of all labour and T&P and cess required for the work and etc. complete in all respect and as per the direction by the Engineer-in-charge. 2 Supplying, filling in foundation and plinth with sand in layers well watered and rammed including cost, conveyance, royalty of all the materials required for the work labour with T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. 3 Cement Concrete of proportion(1:4:8) in foundation and plinth using 4cm size clean hard black granite metal of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15cm thick to the required level, ramming watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. 4 Cement Concrete of proportion(1:3:6) in foundation and plinth using 4cm size clean hard black granite metal of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15cm thick to the required level, ramming watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. 5 Fly Ash brick masonry in cement mortar (1:6) in foundation and plinth using Flyash bricks of 25x12x8 cm size having a crushing strength of not less than 50 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. 6 Cement concrete of proportion (1:2:4) using 12mm size hard granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete and compacting in layers not exceeding 15cm thick with proper packing and ramming each layer of concrete by means of vibrator including watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. 7 Reinforced cement concrete M25 with clean hard crusher broken granite chips of 20mm and down graded size of approved quality from approved quarry including hoisting, lowering and laying concrete with necessary slope and smoothness to receive tar felting or terracing, watering and curing for four weeks, centring, shuttering and finishing the exposed surface and ceiling smooth to receive white washing or painting providing grooves or beads and fan hooks as per requirement in ceiling where necessary, cost of water, including cost, conveyance, royalty taxes of all the materials and labour, T&P and cess etc. complete in all respect but excluding cost of M.S rods or Tor steel and binding wire 18 to 20 gauge and labour charges for straightening, cutting, bending and binding and tying the grills and placing in proper position as per specification and direction of the Engineer-in-charge. 8 Column base 9 Columns & Beams 10 Plinth beams 11 Lintels 12 Chajja 13 Roof Slab 14 Lofts/shelves 15 Cutting, bending, binding and tying the grills and placing in proper position as per drawing and design including cost, conveyance and taxes of M.S rods and binding wire with all labour T&P and cess required for the work etc. complete in all respect in all floors(weight of binding wires will not be considered as measurement of M.S rods) as per specification and direction of the Engineer-in-charge. 16 Fly Ash brick masonry in cement mortar (1:6) in Superstructure using Flyash bricks of 25x12x8 cm size having a crushing strength of not less than 50 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. 17 20mm thick grading Cement plaster in C.M (1:4) over roof slab, finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. 18 16mm th Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. 19 12mm th Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. 20 Finishing surface of walls with cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials taxes, labour T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. 21 Wall priming one coat with approved primer with brush to wall surface after cleaning the surface including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. 22 Wall painting two coats with plastic emulsion paint of approved shade on new work to give an even shade with approved shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. 23 Finishing walls with Weather coat of approved shade on new work two coats, over a coat of priming, to give an even shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. 24 Supplying and fitting-fixing of Un-plasticised poly vinyl chloride (UPVC). Casement Door - 60- Series duly manufactured using UPVC reinforced profiles of 60mmx55mmx2.5mm for outer frames, 102mmx60mmx2.25mm for casement door sash profile and 74mmx60mmx2.5mm mulion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated and welded through fushion welding the door sash shall be fitted with 12mm thick WPC board of green play make duly fixed with EPDM wheathering seal resistance accessories like clipping locking system made of aluminium 1 No per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc, including cost and conveyance of all materials, accessories , labour charges, materials and product confirming to ASTM D 638 -14, EN-477-95 and other applicable codes and standards. 25 Supplying fitting and fixing of two track UPVC sliding window of approved make with 6 mm thick glass of approved quality complete with frame shurrers and all fitting and fixtures.(SOR 2022 Item-12 P-235). 26 Supplying, fitting and fixing of M.S doors and windows shutters of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes of all materials required for the work, labour and T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. 27 Painting two coats over a coat of primer with any approved paint with brush to wood/iron work including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. 28 Providing and fixing Vitrified tiles in floors, treads of steps and landing on 20mm th bed of cement mortar (1:4) (1 cement:4 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge 29 Providing and fixing Glazed tiles in dados, skirting and rises of steps on 12mm th cement plaster (1:3) (1cement:3sand) joined with neat cement slurry mixed with pigment to match the shade of tiles, rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge 30 Cost supplying and labour for fixing of anticorrosive zinc aluminium alloy painted coloured steel roofing profile sheet of 0.45mm thick in roof of godown including fixing a ridge cape with fasteners of approved specification etc. complete but excluding cost of fasteners including drilling holes etc. complete as directed by Engineer-in-Charge Please Enable Macros to View BoQ information
Contract Date: Jun 18, 2026 Contract Value : 23.97 Lakh
Government Departments No of Bidders 6
30.
Power #11314307 Price Bid
Tender for Strenthning Of 11 Kv Line B.Plan 2026-27 Scheme At Various Site Of Edd-Hapur, Under Edc Hapur (17 No. Work) (Dpr N0. 44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60) , Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Plain Cement Concrete Pole 11.0M Long , Plain Cement Concrete Pole 8.5M Long , Acsr Weasel Conductor , Acsr Rabbit Conductor , Acsr Dog Conductor , 11Kv Xlpe Cable 3X120 Sqmm , 11Kv Xlpe Cable 3X185 Sqmm , 11Kv Termination Kit 3X185 Sqmm O/D , 11Kv Termination Kit 3X120 Sqmm I/D , 11Kv Termination Kit 3X120 Sqmm O/D , 11Kv Polymeric Pin Insulator With Pin , 11Kv Polymeric Disc Insulator With Fitting , 11Kv V-Type Cross Arm , Earthing Rod , G.I. Wire 6Swg , G.I. Wire 8Swg , Stay Set , Stay Wire 7/10 Swg. , Erection And Fixing Of The Following Materials As Per Relevant Respo/Departmental Norms And Specifications, Including Proper Installation, Alignment, Tightening, And Commissioning At Site. The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, And Complete Site Restoration, Along With Responsibility Of The Contractor For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Directions Of Engineer-In-Charge , 11Kv Termination Kit 3X120 Sqmm I/D , 11Kv Termination Kit 3X120 Sqmm O/D , 11Kv Polymeric Pin Insulator With Pin , 11Kv Polymeric Disc Insulator With Fitting , 11Kv V-Type Cross Arm , Erection And Fixing Of Pole Structure For 11Kv Ht Line Including Excavation Of Suitable Size Pits, Providing And Fixing Of Shackle Insulators, And Complete Installation Of All Requisite Accessories Strictly As Per Respo Drawings/Standard Norms; Including Providing And Fixing Of Holding Clamps Made Of M.S. Flat Of Size 35×5 Mm With Suitable Nuts & Bolts, Alignment, Tightening And All Allied Works; The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, Formation Of Pits, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining All Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Plain Cement Concrete Pole 8.5 Mtr , Plain Cement Concrete Pole 11 Mtr , Grouting Of St/Pcc Supports In cement concrete 1:3:6 (Cement, Sand & 40 Mm Brick Ballast) In Block Size 450×450 Mm Up To 1/6Th Depth Of Full Length Of Support Below Ground Level And 300 Mm Above Ground Level (Plinth), Using cement concrete 1:3:6 (Cement, Coarse Sand And Stone Grit) Including Mufting As Per Approved Drawing; The Work Shall Include Excavation, Backfilling, Proper Ramming, And Curing Complete In All Respects With All Required Materials; The Scope Further Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Executing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Plain Cement Concrete Pole 8.5 Mtr , Plain Cement Concrete Pole 11 Mtr , Laying, Stringing And Final Sagging Of Acsr Weasel/Rabbit/Dog Conductor Complete In All Respects, Including Proper Tensioning, Alignment And Dressing Of Conductor Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Use Of Stringing Equipment, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Acsr Weasel Conductor , Acsr Rabbit Conductor , Acsr Dog Conductor , Laying Of 11 Kv Ht Xlpe Cable Of Size 3×120Sq.Mm Underground Through Manual Method Digging Briks And Sands, Including Proper Dressing And Positioning Of Cable, Leaving Adequate Spare Cable In Loop Shape At Both Ends As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Cable Pulling Equipment, Alignment, Safety Arrangements And All Allied Works And Materials Will Be Provided By Contractor; Measurement Shall Be Made On Actual Length Of Cable Laid At Site And Payment Shall Be Made Accordingly As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Laying Of 140 Mm Dia (O/D) Pn-4, Pe-80 Grade, Uv Stabilized Hdpe Pipe In Standard Lengths (6 M Each) By Hdd Method For Laying Of Underground Cable, Complete In All Respects As Per Relevant Is Specifications And Directions Of The Site In-Charge; The Scope Of Work Includes Formation Of Entry And Exit Pits, Drilling With Suitable Machinery And Drilling Fluid, Alignment, Jointing, Insertion Of Pipe, Protection Of Existing Utilities, And Complete Site Restoration; The Work Also Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Materials, Safety Arrangements And All Allied Works Required For Proper Execution; The Contractor Shall Be Responsible For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Laying Of 11 Kv Ht Xlpe Cable Of Size 3×185Sq.Mm In Hdpi Pipe By Safly Pulling, Proper Dressing And Positioning Of Cable, Leaving Adequate Spare Cable In Loop Shape At Both Ends As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Cable Pulling Equipment, Alignment, Safety Arrangements And All Allied Works And Materials Will Be Provided By Contractor; Measurement Shall Be Made On Actual Length Of Cable Laid At Site And Payment Shall Be Made Accordingly As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of Gi Pipe 6 Inch Dia Along With Suitable Clamps, Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Fixing And Grauting Of Stay Rods (16X1800)Mm Including All Work Of Excavation, Cement Concrete In Size (0.60X0.60X0.30)M In Ratio 1:4:8 Cement, Sand, 40Mm Brick Ballast As Per Drg. Including Back Filling, Proper Ramming Etc And Fixing Tightening & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing As Per Respo Drawing/Norms By Providing All Grouting Material And Stay Clamp Made Of M.S. Flat Of Size 50X6mm With Proper Size Bolts & Nuts & Loops, Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works And Materials Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Stay Set And Stay Wire Will Be Provided By Department. , Earthing Of Supports With Ms Earth Rod Of (20X2540)Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs, Nut And Botls As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Earth Rod And Gi Wire Will Be Provided By Department. , Providing And Fixing Of All Types Of Clamps Including F-Type Clamps, Holding Clamps, Cross-Arm Clamps, Etc., Along With Suitable Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of M.S. Channel 100X50x5mm And M.S. Angle 65X65x6mm Complete In All Respects, Including Proper Mounting, Alignment And Tightening With All Required Accessories, Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , M.S. Channel 100X50x5mm , M.S. Angle 65X65x6mm , Providing And Fixing Guarding Angle Size 50*50*5 And Other Requisites Material For Guarding By Drawing 02Nos G.I Wire And Making Loop At Suitable Distance As Per Respo Drawing/Norms By Providing Holding Clamps, 02Nos. Eye Bolts Made Of M.S. Round Size 12Mm Dia-100Mm Long & Cross Arm Clamps Made Of M.S. Flat Of Size 50X6mm And Bolts As Per Norms Of Respo Norms, Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. As Per Direction Of Site Incharge. (Gi Wire Will Be Provided By Department). , Providing And Installation Of Maintenance-Free, Multifaceted, Corrosion-Resistance Free Gi Pipe Earthing Upto Water Level Pipe Dia 2 Inch 80Feet. Providing And Fixing Of Gi Earth Strip Size 50Mm*6Mm For Connection (The Strip To Be Properly Welded To The Earthing Electrode And Neutral Support), Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Excavation, Installation, Welding, Connection, Testing, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of Stone Pad Complete In All Respect, Including Supply Of Approved Quality Stone Pad, Necessary Excavation, Dressing, Leveling, Proper Positioning, Packing With Sand/Soil, And All Labour, Tools, Plants, And Materials Required For Satisfactory Completion Of Work As Per Departmental Specifications And Directions Of Engineer-In-Charge. , Safe Dismantling Of Existing/Old Electrical Materials At Site, Including Careful Removal Without Damage To Reusable Items, And Carriage Of Dismantled Materials From Site Of Work To Electricity Store Centre, Hapur, With Loading And Unloading At Both Ends Over Kachha And Pakka Roads, Strictly As Per Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Transportation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Construction Of 11 Kv Line B.Plan 2026-27 Scheme At Various Site Of Edd-Hapur, Under Edc Hapur (01 No. Work) (Dpr N0. 69) , Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Plain Cement Concrete Pole 8.5M Long , 11Kv Xlpe Cable 3X185 Sqmm , 11Kv Termination Kit 3X185 Sqmm O/D , 11Kv Polymeric Pin Insulator With Pin , 11Kv V-Type Cross Arm , Earthing Complete , Erection And Fixing Of The Following Materials As Per Relevant Respo/Departmental Norms And Specifications, Including Proper Installation, Alignment, Tightening, And Commissioning At Site. The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, And Complete Site Restoration, Along With Responsibility Of The Contractor For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Directions Of Engineer-In-Charge , 11Kv Termination Kit 3X185 Sqmm O/D , 11Kv Polymeric Pin Insulator With Pin , 11Kv V-Type Cross Arm , Erection And Fixing Of Pole Structure For Plain Cement Concrete Pole 8.5 Mtr 11Kv Ht Line Including Excavation Of Suitable Size Pits, Providing And Fixing Of Shackle Insulators, And Complete Installation Of All Requisite Accessories Strictly As Per Respo Drawings/Standard Norms; Including Providing And Fixing Of Holding Clamps Made Of M.S. Flat Of Size 35×5 Mm With Suitable Nuts & Bolts, Alignment, Tightening And All Allied Works; The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, Formation Of Pits, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining All Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Grouting Of Plain Cement Concrete Pole 8.5 Mtr Supports In cement concrete 1:3:6 (Cement, Sand & 40 Mm Brick Ballast) In Block Size 450×450 Mm Up To 1/6Th Depth Of Full Length Of Support Below Ground Level And 300 Mm Above Ground Level (Plinth), Using cement concrete 1:3:6 (Cement, Coarse Sand And Stone Grit) Including Mufting As Per Approved Drawing; The Work Shall Include Excavation, Backfilling, Proper Ramming, And Curing Complete In All Respects With All Required Materials; The Scope Further Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Executing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Digging Of Trech As Per Respo Drawings/Standard Norms For 11 Kv Ht Xlpe Cable Of Size 3×185Sq.Mm Underground Through Manual Method Digging Briks And Sands, Including Proper Dressing And Positioning Of Cable, Leaving Adequate Spare Cable In Loop Shape At Both Ends As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Cable Pulling Equipment, Alignment, Safety Arrangements And All Allied Works And Materials Will Be Provided By Contractor; Including Proper Installation And Commissioning At Site.Including Machinery, Drilling/Excavation, Protection Of Existing Utilities, And Complete Site Restoration, Along With Responsibility Of The Contractor For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues Measurement Shall Be Made On Actual Length Of Trech At Site And Payment Shall Be Made Accordingly As Per Departmental Standards And Directions Of The Engineer-In-Charge. And Completing The Work As Per Directions Of Engineer-In-Charge , Laying Of 11 Kv Ht Xlpe Cable Of Size 3×185Sq.Mm (Double Ckt) Underground Through Manual Method Digging Briks And Sands, Including Proper Dressing And Positioning Of Cable, Leaving Adequate Spare Cable In Loop Shape At Both Ends As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Cable Pulling Equipment, Alignment, Safety Arrangements And All Allied Works And Materials Will Be Provided By Contractor; Measurement Shall Be Made On Actual Length Of Cable Laid At Site And Payment Shall Be Made Accordingly As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of Gi Pipe 6 Inch Dia Along With Suitable Clamps, Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Earthing Of Supports With Ms Earth Rod Of (20X2540)Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs, Nut And Botls As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Earth Rod And Gi Wire Will Be Provided By Department. , Providing And Fixing Of All Types Of Clamps Including F-Type Clamps, Holding Clamps, Cross-Arm Clamps, Etc., Along With Suitable Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of M.S. Channel 100X50x5mm Complete In All Respects, Including Proper Mounting, Alignment And Tightening With All Required Accessories, Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of Stone Pad Complete In All Respect, Including Supply Of Approved Quality Stone Pad, Necessary Excavation, Dressing, Leveling, Proper Positioning, Packing With Sand/Soil, And All Labour, Tools, Plants, And Materials Required For Satisfactory Completion Of Work As Per Departmental Specifications And Directions Of Engineer-In-Charge. , Providing And Fixing Of Gi Pipe 6 Inch Dia Along With Suitable Clamps, Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Installation Of 250 Kva Additonal Tf In B.Plan 2026-27 Scheme At Various Site Of Edd-I Hapur, Under Edc Hapur (5 No. Work) (Dpr N0. 102, 103, 104, 105 & 107 ) , Safe Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Plain Cement Concrete Pole 11.0M Long , 11/0.440 Kv 250 Kva Dt , Acsr Weasel Conductor , Lt Ab Cable 3X120+1X95+1X16 Sqmm , Lt Pvc Alu. 1X400 Sqmm , Lt Pvc Alu. 1X240 Sqmm , Lt Pvc Alu. 3.5X400 Sqmm , 11Kv Polymeric Pin Insulator With Pin , 11Kv Disc Insulator T&C Type 45 Kn With Fitting , Earthing Complete , Stay Rod , 11 Fuse Set , Stay Wire 7/10 Swg. , Erection And Fixing Of Double Pole Structure For Plain Cement Concrete Pole 11 Mtr 11Kv Ht Line Including Excavation Of Suitable Size Pits, Providing And Fixing Of Shackle Insulators, And Complete Installation Of All Requisite Accessories Strictly As Per Respo Drawings/Standard Norms; Including Providing And Fixing Of Holding Clamps Made Of M.S. Flat Of Size 35×5 Mm With Suitable Nuts & Bolts, Alignment, Tightening And All Allied Works; The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, Formation Of Pits, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining All Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Grouting Of Plain Cement Concrete Pole 11 Mtr Supports In cement concrete 1:4:8 (Cement, Sand & 40 Mm Brick Ballast) In Block Size 450×450 Mm Up To 1/6Th Depth Of Full Length Of Support Below Ground Level And 300 Mm Above Ground Level (Plinth), Using cement concrete 1:4:8 (Cement, Coarse Sand And Stone Grit) Including Mufting As Per Approved Drawing; The Work Shall Include Excavation, Backfilling, Proper Ramming, And Curing Complete In All Respects With All Required Materials; The Scope Further Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Executing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of M.S. Channel 100X50x5mm And M.S. Angle 65X65x6mm Complete In All Respects, Including Proper Mounting, Alignment And Tightening With All Required Accessories, Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of All Types Of Double Pole Clamps Including, Holding Clamps, Top Channel Clamps, Dropper Channel Clamps Etc., Along With Suitable Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of Danger Board Of Approved Design And Size, Made Of Suitable Weatherproof Material With Required Painting And Lettering, Including Fixing On Pole/Structure With Nuts, Bolts, Clamps And All Necessary Labour, Tools & Plants For Complete And Satisfactory Execution Of Work As Per Departmental Specifications And Directions Of Engineer-In-Charge. , Providing & Fixing Of High Quality 3 Phase 4 Wire 440V, 400A, ≥ 35Ka, With Overload Short Ckt And Earth Falt Protection, Outdoor Type, Weather Proof Lt Mcb With Box With Locking Arrangement For 11/0.440Kv, 250 Kva Dt With Long Barrel Al. Lugs Off Size. Each Lug Must Be Crimp By Proper Crimping Tool As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of High Quality Long Barrel Al. Lugs Off Size. Each Lug Must Be Crimp By Proper Crimping Tool As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of High Quality Henley Type Tailless Unit Protection Cubical Panel 500A, 650V For 250 Kva Dt Including Fixing Of All Accessories By Providing All Required Materials Such As Long Barrel Lugs, Glands, Nuts & Bolts Etc.) Each Lug Must Be Crimp By Proper Crimping Tool As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Erection & Fixing Of 11Kv D.O. Fuse Set Protection Unit For 250 Kva Dt Including Fixing Of All Accessories By Providing All Required Materials (Like Suitable Lugs, Nuts & Bolts Etc.) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Safely Installation Of 11/0.440 Kva 250 Dt With The Help Of Crane/Manual Labour At Lt Sub-Station Double Pole By Providing Proper Size Aluminium Long Barel Lug For Ht/Lt As Per Direction Of Site Incharge. , Laying Of Lt Abc 3X120+1X95+1X16 Sqmm Using Suspension Clamps, I-Hook And Dead End Clamp Inculding Jumpering Work With Peircing Connector, Cable Connection With Distribution Box For Proper Completion Of Work As Per Respo Norms, And As Per Direction Of Site Incharge. , Erection And Laying Of Lt Pvc Inculding Proper Connection With Long Barrel Lug, Proper 3 Nos Crimping On Each Lug, Lt Fuse Set/Smc Box For Proper Completion Of Work As Per Respo Norms, And As Per Direction Of Site Incharge. , Lt Pvc Alu. 1X400 Sqmm , Lt Pvc Alu. 1X240 Sqmm , Lt Pvc Alu. 3.5X400 Sqmm , Fixing And Grauting Of Stay Rods (16X1800)Mm Including All Work Of Excavation, Cement Concrete In Size (0.60X0.60X0.30)M In Ratio 1:4:8 Cement, Sand, 40Mm Brick Ballast As Per Drg. Including Back Filling, Proper Ramming Etc And Fixing Tightening & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing As Per Respo Drawing/Norms By Providing All Grouting Material And Stay Clamp Made Of M.S. Flat Of Size 50X6mm With Proper Size Bolts & Nuts & Loops, Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works And Materials Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Stay Set And Stay Wire Will Be Provided By Department. , Earthing Of Supports With Ms Earth Rod Of (20X2540)Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs, Nut And Botls As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Earth Rod And Gi Wire Will Be Provided By Department. , Providing And Erection Of Chemical Earthing For Neutral Of Dt With Gi Strip 50X6mm Including Excavation Of Pit And Using Necessary Chemical And Electrode To Obtain Results ≤ 1 Ohm, 3M Apart From Support, Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Strip & Earthing Lugs, Nut And Bolts As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing & Fixing Of Coper L-Piece 50X225x10 Mm (Ls) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of Coper L-Piece 50X225x10 Mm (Ls) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Construction Of Tif Plinth Suitable For 250Kva (Size Of 2X2x 1.5 Mtr.) As Per Drawing, cement concrete Work In Foundation In Ratio 1:4:8 (Cement, Sand & Brick Ballast). 1St Class Brick Work In Side Walls cement concrete Ratio Of 1:4 (Cement & Fine Sand). 12Mm Thick Plaster In Ratio 1:4 (Cement & Fine Sand). The Reinforced Cement Concrete Work On Top Of Plinth In Ratio 1:2:4 Are Duly Filling Of Brick Ballast Inside The Plinth & Ramming The Same, Including Cost Of All Material & Labour, As Per Direction O Site Incharge. , Provinding & Fixing Of Safety Fencing (Ms) For 11/0.4 Kv, 250Kva Dt, With Supply Of Material Required For Ms Fencing Upto Dt Upper Level By Constructing 1 Feet Masnary Wall With Bricks & 4X8 Feet Frames Bolted And Welded Alongwith, The construction Of Frames With 75X75x6 Mm Corrosion Free Ms Angle, 8 Swg M.S. Gi Wire Mess Corrosion Free Made Of Construction Utilizing Vertical Post Duly Grouted/Fitted In Ground/On Floor. Horizontal Angle To Be Fitted On Vertical Posts. And Dual Door Gate To Facilitate Entry And Exit With Locking Arrangements. The Vertical Posts/Horizontal Post Shall Be Made Of M.S. Gi Angle . Such Post Shall Be Grounded With cement concrete Ratio 1:4:8. The Length Of Vertical Post Shall Be Sufficient To Take Care Of Fencing As Requirement At Site, And As Per Direction Of Site Incharge. (All Metalic Materilas Should Be Galvanized & Corrosion Free) , Providing And Fixing Of All Types Of Clamps Suitable For Electrical Line/Equipment Works, Including Supply Of Approved Quality Clamps, Nuts, Bolts, Washers, Fabrication, Fitting, Tightening, And All Necessary Labour, Tools & Plants Required For Complete And Satisfactory Execution Of Work As Per Departmental Specifications And Directions Of Engineer-In-Charge. , Providing And Fixing Of Stone Pad Complete In All Respect, Including Supply Of Approved Quality Stone Pad, Necessary Excavation, Dressing, Leveling, Proper Positioning, Packing With Sand/Soil, And All Labour, Tools, Plants, And Materials Required For Satisfactory Completion Of Work As Per Departmental Specifications And Directions Of Engineer-In-Charge.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
31.
Power #11314305 Price Bid
Tender for 11 Kv Line Bifercation Amba Panel Industrial In B.Plan 2026-27 Scheme, In The Jurisdiction Of Edd-Garh Under Edc Hapur. (01 No Work) detail project report 71 , Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Disc Fitting 45 Kn , Acsr Dog Conductor , 11 Kv completion Poly. Pin Insulator , Stay Set , 11 Kv completion Poly. Disc Insulator 45 Kn , 11 Kv Vcb Outgoing , Gi X-Arm Angle , 11 Kv Cable Box O/D Type Size 3X120 Sq.Mm , 11 Kv Ht Xlpe Cable 3X120 Sq.Mm. , Laying, Stringing And Final Sagging Of Acsr Dog Conductor Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And E-Brackets, Wherever Required, As Per Respo/Drawing Norms, Including All Labour, Tools & Plants, Handling, Hoisting And Allied Works For Proper Completion Of Work As Directed By The Engineer-In-Charge , Grouting And Fixing Of Stay Rod Of Size 20 × 1800 Mm Complete In All Respects, Including Excavation, Providing And Laying Cement Concrete Of Size 0.60 × 0.60 × 0.30 M In Ratio 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded 40 Mm Brick Ballast), Backfilling, Proper Ramming, Fixing, Tightening And Nozzling Of Stay Wire With Stay Rod And Pole To The Required Tension As Per Respo Drawings/Norms, Including Providing And Fixing Stay Clamp Made Of M.S. Flat Of Size 50 × 6 Mm With Suitable Nuts, Bolts And Loops, And All Labour, Tools & Plants And Grouting Material As Directed By The Engineer-In-Charge. , Making And Filling Of 11 Kv Xlpe Cable Jointing Kit Suitable For 3 × 120 Sq.Mm Cable, Complete In All Respects, Including Proper Plumbing And Taping Of Xlpe Cable, Providing, Fixing And Crimping Of Suitable Size Approved Quality Lugs, Including Cost Of Lugs, Tapes And All Jointing Materials, Labour, Tools & Plants Required For Satisfactory Completion Of Work As Per Respo Norms And Directions Of The Engineer-In-Charge. , Installing, Testing And Commissioning Of 11 Kv Vcb Outgoing Panel Complete In All Respects, Including Mounting, Alignment, Interconnection, Control Wiring, Earthing, Nuts, Bolts, Clamps And All Associated Accessories, Labour, Tools & Plants Required For Proper Installation And Satisfactory Operation As Per Approved Drawings, Departmental Specifications And Directions Of The Engineer-In-Charge , Providing, Fabricating And Fixing Of Side Bracket Made Of M.S. Channel And M.S. Angle, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And All Associated Accessories, Complete In All Respects As Per Respo Norms And Directions Of The Site In-Charge/Engineer-In-Charge, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work.. , Erection Of 11 Kv V-Type Cross Arm Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And All Associated Accessories, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Erection Of 11 Kv Pin Insulator Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And All Associated Accessories, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Erection Of 11 Kv Disc Insulator With Fittings Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And All Associated Accessories, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of T-Off Clamp Complete With Suitable Nuts, Bolts And All Associated Accessories, As Per Respo Norms/Approved Drawings, Including All Labour, Tools & Plants Required For Proper Installation And Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , 33 Kv Line Strengthing In B.Plan 2026-27 Scheme, In The Jurisdiction Of Edd-Garh Under Edc Hapur. (03 No Work) 17,18,19 , Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Acsr Dog Conductor , Earth Rod , 33 Kv completion Poly. Pin Insulator , Plain Cement Concrete Pole 11 Mtr. , Stay Set , Stay Wire , Gi Wire 4Mm/8Swg , 33 Kv Cross Arm 100X50 Mm , 33 Kv Cable Box O/D Type Size 3X300 , 33 Kv Xlpe Cable Type Size 3X300 Sq.Mm. , Erection And Fixing Of The Following Materials Complete In All Respects, Including All Required T&P, Labour, Handling, Lifting, Fastening And Allied Works For Proper Installation As Per Departmental Specifications, Respo Norms And Directions Of The Site In-Charge/Engineer-In-Charge. , 33 Kv completion Poly. Pin Insulator , Stay Wire , Gi Wire 4Mm/8Swg , Erection And Fixing Of Single Plain Cement Concrete Pole, 11 Mtr Long, For 11 Kv Line Complete In All Respects, Including Digging Of Suitable Pit, Positioning, Alignment, Dressing And Fixing Of Requisite Accessories As Per Respo Drawings/Norms, Including Providing And Fixing Of F-Bracket Made Of M.S. Flat Of Size 50 × 6 Mm, Holding Clamps Made Of M.S. Flat Of Size 50 × 6 Mm With Suitable Nuts And Bolts, And All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Laying, Stringing And Final Sagging Of Acsr Dog Conductor Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And E-Brackets Wherever Required, As Per Respo/Drawing Norms, Including All Labour, Tools & Plants, Handling, Hoisting And Allied Works Required For Proper Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Grouting And Fixing Of Stay Rod Of Size 20 × 1800 Mm Complete In All Respects, Including Excavation, Providing And Laying Cement Concrete Of Size 0.60 × 0.60 × 0.30 M In Ratio 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded 40 Mm Brick Ballast) As Per Drawing, Backfilling, Proper Ramming And Allied Civil Works, Including Fixing, Tightening And Nozzling Of Stay Wire With Stay Rod And Pole To The Required Tension As Per Respo Drawings/Norms, Including Providing And Fixing Stay Clamp Made Of M.S. Flat Of Size 50 × 6 Mm With Suitable Nuts, Bolts And Loops, And All Grouting Materials, Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Earthing Of Supports With M.S. Earth Rod Of Size 20 × 2540 Mm Complete In All Respects, Including Excavation Of Pit, Driving Of M.S. Rod At A Distance Of 3.0 M From The Support And 0.5 M Below Ground Level, And Connection Of Support With Earth Electrode Using Suitable Size G.I. Wire And Earthing Lugs, Including Providing And Fixing Of Proper Size Nuts, Bolts And All Associated Accessories, As Per Respo Drawings/Norms, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Grouting Of Plain Cement Concrete Supports Complete In All Respects With Cement Concrete In Ratio 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded 40 Mm Brick Ballast) In Block Size 450 × 450 Mm Up To 1/6Th Of The Full Length Of Support Below Ground Level, Including Providing 300 Mm Plinth Above Ground Level With Cement Concrete In Ratio 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Grit) With Proper Mufting As Per Approved Drawing, Including Backfilling, Proper Ramming And Providing All Required Grouting Materials, Labour, Tools & Plants For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of 6 Inch Dia Class-B G.I. Pipe Over 33 Kv 3 × 300 Sq.Mm Xlpe Cable And Lt Xlpe Cable Before Mounting On Double Pole Structure, Complete In All Respects, Including Providing And Fixing Of Suitable Clamps, Sealing Of Top And Bottom Ends Of Pipe, Burying One End Of Pipe Approximately 500 Mm Below Ground Level, Mounting And Clamping Of Cable On Double Pole Structure, And Making Connection With Overhead Line At Both Ends, Including All Labour, Tools & Plants And Associated Materials Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Making And Filling Of 33 Kv Xlpe Cable Jointing Kit Suitable For 3 × 300 Sq.Mm Cable Complete In All Respects, Including Proper Plumbing And Taping Of Xlpe Cable, Providing, Fixing And Crimping Of Suitable Size Approved Quality Lugs, Including Cost Of Lugs, Tapes And All Jointing Materials, Labour, Tools & Plants Required For Satisfactory Completion Of Work As Per Respo Norms And Directions Of The Site In-Charge/Engineer-In-Charge. , Erection Of 33 Kv V-Type Cross Arm Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And All Associated Accessories, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Trenchless Laying Of 200 Mm O/D Pe-80, Pn-4 Grade Uv Stabilized Hdpe Pipe Conforming To Relevant Is Specifications In Standard 6 Mtr Length For Laying Of Underground Cable, Complete In All Respects As Per Respo Norms, Including Cost Of Hdpe Pipe, Jointing, Handling, Labour, Tools & Plants And All Associated Works Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of Stone Pad Complete In All Respect, Including Supply Of Approved Quality Stone Pad, Necessary Excavation, Dressing, Leveling, Proper Positioning, Packing With Sand/Soil, And All Labour, Tools, Plants, And Materials Required For Satisfactory Completion Of Work As Per Departmental Specifications And Directions Of Engineer-In-Charge. , Laying Of 33 Kv Xlpe Cable Of Size 3 × 300 Sq.Mm Underground Through Hdpe Pipe Complete In All Respects, Including Pulling, Dressing, Alignment And Leaving Spare Cable In Loop Shape At Both Ends As Per Respo Norms, Including All Labour, Tools & Plants And Associated Works Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of Holding Clamp Complete In All Respects, Including Suitable Nuts, Bolts And All Associated Accessories, As Per Respo Norms/Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Jumpering And Line Energisation Work Complete In All Respects, Including Proper Connection, Tightening, Testing And Commissioning As Per Respo Norms/Approved Drawings, Including All Labour, Tools & Plants And Associated Materials Required For Safe And Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Safe De-Erection And Dismantling Of Existing/Old Electrical Materials At Site, Including Careful Removal Without Damage To Reusable Items, And Carriage Of Dismantled Materials From Site Of Work To Electricity Store Centre, Hapur, With Loading And Unloading At Both Ends Over Kachha And Pakka Roads, Strictly As Per Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Transportation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , 11 Kv Line Strengthing In B.Plan 2026-27 Scheme, In The Jurisdiction Of Edd-Garh Under Edc Hapur. (11 No Work) detail project report 61,62,63,64,65,66,67,68,69,70,71 , Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Disc Fitting 45 Kn , Acsr Weasel Conductor , Acsr Rabbit Conductor , Acsr Dog Conductor , Earth Rod , 11 Kv completion Poly. Pin Insulator , Plain Cement Concrete Pole 8.5 Mtr. , Plain Cement Concrete Pole 11 Mtr. , Stay Set , Stay Wire , 11 Kv completion Poly. Disc Insulator 45 Kn , Gi Wire 10Swg , Gi X-Arm Angle , 11 Kv Vtype Steel Cross Arm , 33 Kv Cable Box O/D Type Size 3X300 , 11 Kv Cable Box O/D Type Size 3X120 Sq.Mm , 33 Kv Xlpe Cable Type Size 3X300 Sq.Mm. , 11 Kv Ht Xlpe Cable 3X120 Sq.Mm. , 11 Kv Xlpe Cable 3X300 Sq.Mm. , Erection And Fixing Of The Following Materials Complete In All Respects, Including All Required T&P, Labour, Handling, Lifting, Fastening And Allied Works For Proper Installation As Per Departmental Specifications, Respo Norms And Directions Of The Site In-Charge/Engineer-In-Charge. , Disc Fitting 45 Kn , 11 Kv completion Poly. Pin Insulator , Stay Wire , 11 Kv completion Poly. Disc Insulator 45 Kn , Gi Wire 10Swg , Gi X-Arm Angle , 33 Kv Xlpe Cable Type Size 3X300 Sq.Mm. , 11 Kv Ht Xlpe Cable 3X120 Sq.Mm. , Erection And Fixing Of Single Plain Cement Concrete Pole, 8.50 Mtr Long, For 11 Kv Line Complete In All Respects, Including Digging Of Suitable Pit, Positioning, Alignment And Fixing Of Requisite Accessories As Per Respo Drawings/Norms, Including Providing And Fixing Of F-Bracket Made Of M.S. Flat Of Size 50 × 6 Mm And Holding Clamps Made Of M.S. Flat Of Size 50 × 6 Mm With Suitable Nuts And Bolts, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Laying, Stringing And Final Sagging Of Acsr Dog Conductor Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And E-Brackets Wherever Required, As Per Respo/Drawing Norms, Including All Labour, Tools & Plants, Handling, Hoisting And Allied Works Required For Proper Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Laying, Stringing And Final Sagging Of Acsr Weasel Conductor Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And E-Brackets Wherever Required, As Per Respo/Drawing Norms, Including All Labour, Tools & Plants, Handling, Hoisting And Allied Works Required For Proper Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Laying, Stringing And Final Sagging Of Acsr Rabbit Conductor Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And E-Brackets Wherever Required, As Per Respo/Drawing Norms, Including All Labour, Tools & Plants, Handling, Hoisting And Allied Works Required For Proper Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Grouting And Fixing Of Stay Rod Of Size 20 × 1800 Mm Complete In All Respects, Including Excavation, Providing And Laying Cement Concrete Of Size 0.60 × 0.60 × 0.30 M In Ratio 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded 40 Mm Brick Ballast) As Per Approved Drawing, Including Backfilling, Proper Ramming And Allied Works, Fixing, Tightening And Nozzling Of Stay Wire With Stay Rod And Pole To The Required Tension As Per Respo Drawings/Norms, Including Providing And Fixing Stay Clamp Made Of M.S. Flat Of Size 50 × 6 Mm With Suitable Nuts, Bolts And Loops, And All Grouting Materials, Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Earthing Of Supports With M.S. Earth Rod Of Size 20 × 2540 Mm Complete In All Respects, Including Excavation Of Pit, Driving Of M.S. Rod At A Distance Of 3.0 M From The Support And 0.5 M Below Ground Level, And Connection Of Support With Earth Electrode Using Suitable Size G.I. Wire And Earthing Lugs, Including Providing And Fixing Of Proper Size Nuts, Bolts And All Associated Accessories, As Per Respo Drawings/Norms, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Grouting Of Plain Cement Concrete Supports Complete In All Respects With Cement Concrete In Ratio 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded 40 Mm Brick Ballast) In Block Size 450 × 450 Mm Up To 1/6Th Of The Full Length Of Support Below Ground Level, Including Providing 300 Mm Plinth Above Ground Level With Cement Concrete In Ratio 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Grit) With Proper Mufting As Per Approved Drawing, Including Backfilling, Proper Ramming And Providing All Required Grouting Materials, Labour, Tools & Plants For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of 6 Inch Dia Class-B G.I. Pipe Over 33 Kv 3 × 300 Sq.Mm Xlpe Cable And Lt Xlpe Cable Before Mounting On Double Pole Structure, Complete In All Respects, Including Providing And Fixing Of Suitable Clamps, Sealing Of Top And Bottom Ends Of Pipe, Burying One End Of Pipe Approximately 500 Mm Below Ground Level, Mounting And Clamping Of Cable On Double Pole Structure, And Making Connection With Overhead Line At Both Ends, Including All Labour, Tools & Plants And Associated Materials Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Making And Filling Of 33 Kv Xlpe Cable Jointing Kit Suitable For 3 × 300 Sq.Mm Cable Complete In All Respects, Including Proper Plumbing And Taping Of Xlpe Cable, Providing, Fixing And Crimping Of Suitable Size Approved Quality Lugs, Including Cost Of Lugs, Tapes And All Jointing Materials, Labour, Tools & Plants Required For Satisfactory Completion Of Work As Per Respo Norms And Directions Of The Site In-Charge/Engineer-In-Charge. , Making And Filling Of 11 Kv Xlpe Cable Jointing Kit Suitable For 3 × 120 Sq.Mm Cable Complete In All Respects, Including Proper Plumbing And Taping Of Xlpe Cable, Providing, Fixing And Crimping Of Suitable Size Approved Quality Lugs, Including Cost Of Lugs, Tapes And All Jointing Materials, Labour, Tools & Plants Required For Satisfactory Completion Of Work As Per Respo Norms And Directions Of The Site In-Charge/Engineer-In-Charge. , Providing, Fabricating And Fixing Of Side Bracket Made Of M.S. Channel And M.S. Angle Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And All Associated Accessories, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Erection Of 33 Kv V-Type Cross Arm Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And All Associated Accessories, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Trenchless Laying Of 200 Mm O/D Pe-80, Pn-4 Grade Uv Stabilized Hdpe Pipe Conforming To Relevant Is Specifications In Standard 6 Mtr Length For Laying Of Underground Cable, Complete In All Respects As Per Respo Norms, Including Cost Of Hdpe Pipe, Jointing, Handling, Labour, Tools & Plants And All Associated Works Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Laying Of 11 Kv Xlpe Cable Of Size 3 × 125 Sq.Mm Underground Through Hdpe Pipe Complete In All Respects, Including Pulling, Dressing, Alignment And Leaving Spare Cable In Loop Shape At Both Ends As Per Respo Norms, Including All Labour, Tools & Plants And Associated Works Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Laying Of 33 Kv Xlpe Cable Of Size 3 × 300 Sq.Mm Underground Through Hdpe Pipe Complete In All Respects, Including Pulling, Dressing, Alignment And Leaving Spare Cable In Loop Shape At Both Ends As Per Respo Norms, Including All Labour, Tools & Plants And Associated Works Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of Danger Board Complete In All Respects, Including Providing And Fixing Of All Required Accessories Such As Suitable Clamps, Nuts, Bolts And Allied Materials, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of Stone Pad Of Size 300 × 300 × 75 Mm Complete In All Respects, As Per Respo Norms And Approved Drawings, Including Excavation, Dressing, Leveling, Proper Positioning, Packing And Fixing With All Labour, Tools & Plants And Associated Materials Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of F-Clamp Complete In All Respects, Including Suitable Nuts, Bolts And All Associated Accessories, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of Holding Clamp Complete In All Respects, Including Suitable Nuts, Bolts And All Associated Accessories, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Top Channel Of Approved Make And Required Dimensions Conforming To Respo Norms And Specifications; Work Includes Material Supply, Transport, Unloading, Cutting To Size, Hoisting, Alignment, And Rigidly Securing In Position With Approved Fasteners, Hardware, And Scaffolding At Any Height Or Location, Complete In All Respects As Per The Manufacturers Guidelines And To The Entire Satisfaction And Direction Of The Site In-Charge. , Providing And Fixing G.I. Barbed Wire Fencing Of Approved Make, Weight, And Gauge Conforming Strictly To Respo Norms And Standard Technical Specifications; Work Includes Supplying, Transporting, And Unrolling Required Lines Of Horizontal And Diagonal Strands, Tightly Stretching, Aligning, And Securely Fixing To Concrete/Steel/Stone Posts Using Approved G.I. Staples, Binding Wire, Or Fasteners, Including All Leads, Lifts, Necessary Scaffolding, Tools, Tackles, And Labor Required To Complete The Installation In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing And Fixing M.S. / G.I. / High-Tensile Nut And Bolt Assemblies Of Approved Make, Grade, And Required Diameters/Lengths Conforming Strictly To Respo Norms And Standard Technical Specifications; Work Includes Supply, Transport, Positioning, Aligning, And Rigidly Tightening To The Specified Torque Using Appropriate Washers (Plain/Spring) And Tools, Including All Necessary Scaffolding, Labor, Leads, And Lifts Required To Complete The Fastening Work In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Erection Of Structural Steel Bracing Sets Of Size 4.3 M X 4.3 M Fabricated From M.S. Angle Sections Of Size 65 Mm X 65 Mm X 6 Mm, Conforming Strictly To Respo Norms And Technical Specifications; Work Includes Hoisting, Lifting, Proper Positioning, Leveling, Aligning, And Rigidly Securing The Assembly Using Approved Holding Clamps, Structural Nuts, Bolts, And Washers Of Required Sizes, Including The Cost Of All Fastening Hardware, Necessary Tools, Tackles, Scaffolding, Staging, Leads, Lifts, And Labor Required To Complete The Installation In All Respects As Per Standard Engineering Practices And Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , 33 Kv Protection Of Sub-Station In B.Plan 2026-27 Scheme, In The Jurisdiction Of Edd-Garh Under Edc Hapur.(01 No Work) detail project report 39 , Carriage Of 33 Kv Vcb From Electricity Store Center Hapur/J,E. Store To Site Of Work With Loading And Unloading At Both Ends On Kachha Packka Road, As Per Direction Of Site Lncharge. , Carriage Of 33 Kv Ct Out Door From Electricity Store Center Hapur/J,E. Store To Site Of Work With Loading And Unloading At Both Ends On Kachha Packka Road, As Per Direction Of Site Lncharge. , 33 Kv Installation Of Vcb , 33 Kv Installation Of Ct Outdoor , Providing & Making And Fixing Of Side Breckit By Ms. Channel, Ms Angle By Providing Holding Clamp & Nut Bolt As Per Respo Norms, And As Per Direction Of Site Incharge. , Erecetion Of 11 Kv Disc Insulator With Fitting By Providing Holding Clamp & Nut Bolt As Per Respo Norms, And As Per Direction Of Site Incharge. , Providing And Fixing Of Copper Control Cable Size 2X2.25 Sq.Mm. , As Per Respo/Norms And As Per Direction Of Site Incharge. , Providing, Installing, Testing, And Commissioning Of Maintenance-Free Water Level Chemical Earthing System Conforming To Is:3043 Specifications For Distribution Transformers And Substations; Scope Includes Boring An Earth Pit Of Required Depth, Inserting A Heavy-Duty Copper-Bonded Steel Electrode Or Gi Pipe (Minimum 3-Meter Length), Backfilling The Pit With Eco-Friendly Moisture-Retaining Earth Enhancement Chemical Compound, Providing A Dedicated Funnel Arrangement With A Perforated Gi Watering Pipe Running To The Root Of The Electrode For Manual Moisture Replenishment, Constructing A Rigid Brick Masonry/Pre-Cast Concrete Inspection Chamber With A Heavy-Duty Removable Cover Plate At Ground Level, And Establishing Secure Structural Connections To The Equipment Earth Grid Using Proper Size Gi/Copper Strips, Inclusive Of All Excavation In Any Soil Strata, Backfilling, Ramming, Hardware, Labor, Tools, Tackles, And Transportation, Complete In All Respects As Per The Directions Of The Engineer-In-Charge. , Providing And Fixing Of Ms Channel As Per Respo/Norms And As Per Direction Of Site Incharge. , Providing And Fixing Of Ms Angle As Per Respo/Norms And As Per Direction Of Site Incharge. , Jumpering And Line Energisation Work Properly As Per Respo/Norms And As Per Direction Of Site Incharge. , 33 Kv Vcb In B.Plan 2026-27 Scheme, In The Jurisdiction Of Edd-Garh Under Edc Hapur. ( 07 No Work) detail project report 20,21,22,23,24,25,26 , Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , 33 Kv Ct Outdoor Ctr 200/100/1 , Control Pannel 33 Kv Double T/F , 33 Kv Outdoor Type Vcb , Providing, Fabricating, And Fixing M.S. Side Brackets Of Required Design And Dimensions, Utilizing Approved M.S. Channel And M.S. Angle Sections, Conforming Strictly To Respo Norms And Standard Technical Specifications; Scope Of Work Includes Material Supply, Cutting, Welding, Drilling, Rust-Preventive Primer Coating, Hoisting, Proper Alignment, And Rigidly Securing The Brackets In Position Using Appropriate Holding Clamps, Nuts, Bolts, And Washers, Inclusive Of All Necessary Staging, Scaffolding, Tools, Tackles, Labor, Leads, And Lifts At Any Height, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing, Laying, Testing, And Commissioning Of Pvc/Xlpe Insulated, Pvc Sheathed 2 Core X 2.25 Sq.Mm. Copper Control Cable (Armored/Unarmored) Of Approved Make And Grade, Conforming Strictly To Respo Norms And Relevant Is Specifications; Work Includes Supply, Transportation, Storage, Unrolling, Straightening, And Laying Of Cable Through Existing Pipes, Conduits, Cable Trays, Or Trenches, Including Dressing, Clamping, Structural Clipping, Proper Tag Identification, End-Termination Using Required Size Copper Lugs, Glands, Glands-Earthing, And Testing (Insulation Resistance And Continuity Tests), Inclusive Of All Labor, Tools, Tackles, Scaffolding, Leads, And Lifts, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing, Laying, Testing, And Commissioning Of Pvc/Xlpe Insulated, Pvc Sheathed 4 Core X 2.25 Sq.Mm. Copper Control Cable (Armored/Unarmored) Of Approved Make And Grade, Conforming Strictly To Respo Norms And Relevant Engineering Specifications; Work Includes Supply, Transportation, Storage, Unrolling, Straightening, And Laying Of Cable Through Existing Pipes, Conduits, Cable Trays, Or Trenches, Including Systematic Dressing, Clamping, Structural Clipping, Proper Tag Identification, End-Termination Using Required Size Copper Lugs, Glands, Glands-Earthing, And Necessary Testing (Insulation Resistance And Continuity Tests), Inclusive Of All Labor, Tools, Tackles, Scaffolding, Staging, Leads, And Lifts At Any Height, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Construction Of Vacuum Circuit Breaker (Vcb) Plinth Of Size 2.0 M X 2.0 M X 1.5 M Suitable For A 250 Kva Transformer/System, Executed Strictly As Per Approved Structural Drawings And Respo Norms; Work Includes Excavation, Providing And Laying Cement Concrete (Cc) 1:4:8 (1 Cement : 4 Sand : 8 Graded Brick Ballast) In Foundation, Constructing Side Walls Using 1St Class Brickwork In Cement Mortar 1:4 (1 Cement : 4 Fine Sand), Applying 12 Mm Thick Cement Plaster 1:4 (1 Cement : 4 Fine Sand) On Exposed Surfaces, Backfilling Inside The Plinth With Brick Ballast Including Systematic Watering And Heavy Ramming/Compaction, And Casting A Finished Reinforced Cement Concrete (Rcc) Top Slab In 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Including Necessary Reinforcement Steel, Shuttering, Centering, And Curing; Rate Shall Be Fully Inclusive Of All Material Supply, Transport, Machinery, Scaffolding, Labor, Leads, And Lifts, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing, Laying, Testing, And Commissioning Of Pvc/Xlpe Insulated, Pvc Sheathed 6 Core X 2.25 Sq.Mm. Copper Control Cable (Armored/Unarmored) Of Approved Make And Grade, Conforming Strictly To Respo Norms And Relevant Engineering Specifications; Work Includes Supply, Transportation, Storage, Unrolling, Straightening, And Systematic Laying Of Cable Through Existing Pipes, Conduits, Cable Trays, Or Trenches, Including Dressing, Clamping, Structural Clipping, Proper Tag Identification, End-Termination Using Required Size Copper Lugs, Compression Glands, Glands-Earthing, And Mandatory Pre-Commissioning Testing (Insulation Resistance And Continuity Tests), Inclusive Of All Labor, Tools, Tackles, Scaffolding, Staging, Leads, And Lifts At Any Height, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Propviding And Intallation All Requrment For Earthing Of Neutral By Boring And Lowering Of G.I. Pipe Size 32 Mm Dia... Into The Ground Up To Water Level 80 Fit. With The Lower End Of Solid Copper Cone Approx. 225Mm Long And 750 Gm. In Weight Shall Be Provided And In Pipe As Well As Bringing Out A Continuous Copper Wire 6 Swg From The Cone Up To The Ground Surface Where It Will Bc Bolted To The Nf.S. Earth Strip For Tif Neutral Connection, The Earth Strip *Vill Be Welded To The G.L. Pipe And Neutral Earthing Support, As Per Direction Of Site Incharge. , Installation Of 100 Kva Additonal Tf In B.Plan 2026-27 Scheme At Various Site Of Edd-Garh, Under Edc Hapur (No. Of Work 5) 121,122,123,124,128 , Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Disc Fitting 45 Kn , Acsr Weasel Conductor , Earth Rod , A.B Cable L.T (3X120+1X95+1X16) Sq Mm , D.O Fuse Set , 11 Kv Tpmo Switch , 11 Kv completion Poly. Pin Insulator , Plain Cement Concrete Pole 8.5 Mtr. , Plain Cement Concrete Pole 11 Mtr. , Stay Set , Stay Wire , 11 Kv completion Poly. Disc Insulator 45 Kn , Lt Alu. Xlpe Cable 3.5X150 Sq. Mm , Gi Wire 4Mm/8Swg , Gi X-Arm Angle , 100 Kva Transformer , Lt Xlpe Cable 3.5X150 Sq.Mm. , Erection And Fixing Of The Following Materials Complete In All Respects, Including All Required T&P, Labour, Handling, Lifting, Fastening And Allied Works For Proper Installation As Per Departmental Specifications, Respo Norms And Directions Of The Site In-Charge/Engineer-In-Charge. , Disc Fitting 45 Kn , 11 Kv completion Poly. Pin Insulator , Stay Wire , 11 Kv completion Poly. Disc Insulator 45 Kn , Lt Alu. Xlpe Cable 3.5X150 Sq. Mm , Gi Wire 4Mm/8Swg , Gi X-Arm Angle , Lt Xlpe Cable 3.5X150 Sq.Mm. , Erection Of Double Pole (Dp) Structure Utilizing 8.5-Meter Long Plain Cement Concrete Poles, Complete With All Necessary Structural Accessories And Conforming Strictly To Approved Respo Drawings And Norms; Work Includes Excavation, Pole Erection, Alignment, Backfilling, And Fabrication, Supply, And Fixing Of M.S. Top And Dropper Channels, M.S. Tif Angles, And E-Brackets; Installation Of 11 Kv Pin Insulators With Pins And Disc Insulators With Appropriate Hardware/Disc Fittings; Providing And Fixing Structural Stays, Bracings, And Assemblies Fabricated From M.S. Flat Of Size 50 Mm X 6 Mm, Secured Tightly With Proper Size Nuts, Bolts, And Washers; Execution Of Complete Standard Jumpering, Binding, And Pg Clamping Work Using Appropriate Conductors/Accessories To Ensure Electrical Continuity; Rate Shall Be Fully Inclusive Of All Structural Steel, Hardware, Insulation Materials, Machinery, Tools, Tackles, Scaffolding, Labor, Leads, And Lifts At Any Height, Complete In All Respects As Per Standard Engineering Practices Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Erection Of Double Pole (Dp) Structure Utilizing 11-Meter Long Plain Cement Concrete Poles, Complete With All Structural Accessories And Conforming Strictly To Approved Respo Drawings And Norms; Work Includes Excavation, Pole Erection, Leveling, Alignment, And Backfilling; Fabrication, Supply, And Fixing Of M.S. Top And Dropper Channels, M.S. Tf Angles, And E-Brackets; Installation Of 11 Kv Pin Insulators With Pins And Disc Insulators With Appropriate Hardware/Disc Fittings; Providing And Fixing Structural Bracings, Ties, And Support Assemblies Fabricated From M.S. Flat Of Size 50 Mm X 6 Mm, Secured Tightly With Proper Size Nuts, Bolts, And Washers; Execution Of Complete Standard Jumpering, Binding, And Pg Clamping Work Using Appropriate Conductors To Ensure Reliable Electrical Continuity; Rate Shall Be Fully Inclusive Of All Structural Steel Fabrication, Hardware, Insulation Components, Handling Machinery, Tools, Tackles, Scaffolding, Labor, Leads, And Lifts At Any Height, Complete In All Respects As Per Standard Electrical Engineering Practices Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing And Laying Stone Pad Base Blocks Of Size 300 Mm X 300 Mm X 75 Mm Of Approved Quality And Strength, Conforming Strictly To Respo Drawings And Norms; Work Includes Supply, Transportation, Storage, Necessary Excavation Or Surface Preparation, Leveling, And Dressing Of Soil, Proper Positioning, Rammed Leveling, And Alignment Of The Stone Pads Beneath Poles, Structures, Or Stays To Act As A Solid Bearing Foundation, Including The Cost Of All Materials, Machinery, Tools, Tackles, Handling Labor, Leads, And Lifts At Any Location, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing And Fixing Heavy-Duty M.S. Holding Clamps Fabricated To Required Profiles And Dimensions, Complete With Matching Nut, Bolt, And Washer Assemblies Of Approved Make And Size, Conforming Strictly To Respo Drawings And Norms; Work Includes Material Supply, Transport, Proper Positioning Around Poles, Structures, Or Machinery, Alignment, And Rigid Fastening/Tightening To Specified Torque, Inclusive Of All Anti-Corrosive Primer/Paint Coatings, Necessary Tools, Tackles, Scaffolding, Labor, Leads, And Lifts At Any Height, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing And Fixing Heavy-Duty M.S. Clamps Fabricated To Required Design, Shape, And Dimensions, Complete With Appropriate Size Nut, Bolt, And Washer Assemblies Of Approved Make, Conforming Strictly To Respo Drawings And Norms; Work Includes Material Supply, Transportation, Precise Positioning, Alignment, And Rigid Tightening Around Poles, Structural Members, Or Equipment, Inclusive Of Rust-Preventive Primer And Paint Coatings, All Necessary Tools, Tackles, Scaffolding, Staging, Labor, Leads, And Lifts At Any Height, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Safe Handling, Lifting, Positioning, And Installation Of A 100 Kva Distribution Transformer Onto An Existing Lt Sub-Station Double Pole Structure Or Concrete Plinth, Utilizing An Appropriate Capacity Crane, Mechanical Hoists, Or Manual Labor With All Safety Equipment; Work Includes Proper Alignment, Leveling, Structural Securing, And Providing And Crimping Appropriate Sizes Of Heavy-Duty Aluminium Long Barrel Lugs For All Ht (High Tension) And Lt (Low Tension) Terminal Connections To Ensure Low-Resistance Termination, Inclusive Of All Handling Machinery, Rigging Tools, Safety Tackles, Scaffolding, Specialized Labor, Leads, And Lifts At Any Height, Executed Complete In All Respects As Per Standard Electrical Engineering Practices And Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing, Laying, Stringing, Testing, And Commissioning Of Xlpe Insulated Lt Aerial Bunched Cable (Abc) Of Size 3X120 + 1X95 + 1X16 Sq.Mm. (Comprising Three Phase Conductors, One Insulated Messenger Wire, And One Street Light Conductor) Of Approved Make, Conforming Strictly To Respo Norms And Relevant Standard Specifications; Work Includes Unrolling, Straightening, Hoisting, And Tensioning Of The Cable Along Poles/Structures Using Appropriate Sagging Equipment, Providing And Fixing Necessary Hardware Including Suspension Clamps, Dead-End/Anchoring Clamps, I-Hooks, Pole Brackets, Stainless Steel Strapping With Buckles, And Insulation Piercing Connectors (Ipcs) For Jointing Or Tapping; Scope Covers Proper Dressing, Securing, And Mid-Span Clamping To Maintain Standard Clearances, Inclusive Of All Machinery, Winches, Pulling Tackles, Scaffolding, Safety Gear, Labor, Leads, And Lifts At Any Height, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Grouting & Fixing Of Stay Rods (20X1800)Mm Including All Work O Excavation, Cement Concrete In Size (0.60X0.60Xo.30)M In Ratio 1:4:8 Cement, Sand, 40Mm Brick Ballast As Per Drg. Including Back Filling, Proper Ramming Etc And Fixing Tightening & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing As Per Respo Drawing Norms By Providing All Grouting Material And Stay Clamp Made Of M.S. Flat Of Size 50X6mm With Proper Size Bolts & Nuts & Loops, As Per Direction Of Site Incharge. , Earthing Of Supports With Ms Earth Rod Of (20X2500) Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs As Per Respo Drawing/Norms By Providing Proper Size Nuts & Bolts, As Per Direction Of Site Incharge. , Grouting Of St/Pcc Supports In cement concrete 1:4:8 (Cement, Sand & 40Mm Brick Ballst) Grouting Will Be Done In The Block Of Size (450X450)Mm Xl/6Th O Full Length Of The Support, Up To Ground Level, 300Mm Plinth Above The Ground Level With cement concrete 1:3:6 (Cement, Core Sand And Stone Grit) With Mufting As Per Drawing, Work Includes Back Filling & Proper Ramming By Providing All Required Grouting Materials, As Per Direction Of Site Incharge , Wrapping Of Barbed Wire On 11Kv St/Pcc Poles As Anti-Climbing Device For A Length Of 0.9Mtrs. Wire Pitch/Gap 13Mm And Fixing Upper And Lower End Keeping Lower End At A Height Of 2.75 Mtr From The Ground Complete, Including Providing & Fixing Of Lower End & Upper End Clamps Made Of M.S. Flat 40X5mm Complete With Nuts & Bolts And All Other Required Material And T&P., As Per Direction Of Site Inchargc. , Laying , Stringing And Final Sagging Of Acsr Weasel Conductor, As Per Respo[Drawing Norms And As Per Direction Of Site Incharge. , Erection & Fixing Of 11Kv Fuse/Do Fuse Set Set On Plain Cement Concrete Pole, By Providing All Required Fixing Materials As Per Respo/Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of Danger Board, Including Fixing Of All Accessories By Providing All Required Materials (Like Suitable Nuts & Bolts Etc.) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of Lt Fuse Set Protection Unit For 100 Kva Tf With Smc Box Including Fixing Of All Accessories By Providing All Required Materials (Like Suitable Nuts & Bolts Etc.) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Erection & Fixing Of 11Kv Tpmo Set On Plain Cement Concrete Pole, By Providing All Required Fixing Materials As Per Respo/Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of Ms Angle & Ms Channel All Accessories By Providing All Required Materials (Like Suitable Nuts & Bolts Etc.) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Ms Channel , Ms Angle , Jumpering And Line Energisation Work Properly As Per Respo Norms And As Per Direction Of Site Incharge. , Installation Of 250 Kva Additonal Tf In B.Plan 2026-27 Scheme At Various Site Of Edd-Garh, Under Edc Hapur 117, 118, 119,120, 125, 126, 127 , Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Disc Fitting 45 Kn , Acsr Weasel Conductor , Earth Rod , A.B Cable L.T (3X120+1X95+1X16) Sq Mm , D.O Fuse Set , 11 Kv Tpmo Switch , 250 Kva 11/0.4 Kv Transformer New , 11 Kv completion Poly. Pin Insulator , Plain Cement Concrete Pole 8.5 Mtr. , Plain Cement Concrete Pole 11 Mtr. , Stay Set , 11 Kv completion Poly. Disc Insulator 45 Kn , Lt Alu. Xlpe Cable 3.5X400 Sq. Mm , Erection And Fixing Of The Following Materials Complete In All Respects, Including All Required T&P, Labour, Handling, Lifting, Fastening And Allied Works For Proper Installation As Per Departmental Specifications, Respo Norms And Directions Of The Site In-Charge/Engineer-In-Charge. , Disc Fitting 45 Kn , 11 Kv completion Poly. Pin Insulator , 11 Kv completion Poly. Disc Insulator 45 Kn , Erection Of Double Pole Structure With All Accessories On Plain Cement Concrete Pole 8.5 Mtr. Long, Fabrication And Fixing Of M.S. Top & Dropper Channel, M.S. Tif Angle, E-Bracket, 11 Kv Pin Insulator With Pin, Disc Insulator With Disc Fitting Etc., As Per Respo Drawing Norms By Providing All Made O M.S. Flat Of Size 50X6 Mm With Proper Size Nuts And Bolts, And Jumpering Etc Work, As Per Direction Of Site Incharge. , Erection Of Double Pole Structure With All Accessories On Plain Cement Concrete Pole 11 Mtr. Long, Fabrication And Fixing Of M.S. Top & Dropper Channel, M.S. Tif Angle, E-Bracket, 11 Kv Pin Insulator With Pin, Disc Insulator With Disc Fitting Etc., As Per Respo Drawing Norms By Providing All Made O M.S. Flat Of Size 50X6 Mm With Proper Size Nuts And Bolts, And Jumpering Etc Work, As Per Direction Of Site Incharge. , Safely Installation Of 250 Kva Transformer With The Help Of Crane/Manual Labour At Lt Sub-Station Double Pole/Plinth, As Per Direction Of Site Incharge. , Laying Of Lt Alu. Xlpe Cable Al. 3.5X400 Sqmm By Porviding Al Lug And Panching With Cremping Tool Complection Work Properly, As Per Respo/Norms And As Per Direction Of Site Incharge. , Laying , Stringing And Final Sagging Of Acsr Weasel Conductor, As Per Respo[Drawing Norms And As Per Direction Of Site Incharge. , Laying Of Lt Abc 3X120+1X95+1X16 Sqmm By Providing Suspension Clamp Dead End Clamp, I-Hook Etc And Completion Work Properly, As Per Respo Norms, And As Per Direction Of Site Incharge. , Grouting & Fixing Of Stay Rods (20X1800)Mm Including All Work O Excavation, Cement Concrete In Size (0.60X0.60Xo.30)M In Ratio 1:4:8 Cement, Sand, 40Mm Brick Ballast As Per Drg. Including Back Filling, Proper Ramming Etc And Fixing Tightening & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing As Per Respo Drawing Norms By Providing All Grouting Material And Stay Clamp Made Of M.S. Flat Of Size 50X6mm With Proper Size Bolts & Nuts & Loops, As Per Direction Of Site Incharge. , Earthing Of Supports With Ms Earth Rod Of (20X2500) Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs As Per Respo Drawing/Norms By Providing Proper Size Nuts & Bolts, As Per Direction Of Site Incharge. , Grouting Of St/Pcc Supports In cement concrete 1:4:8 (Cement, Sand & 40Mm Brick Ballst) Grouting Will Be Done In The Block Of Size (450X450)Mm Xl/6Th O Full Length Of The Support, Up To Ground Level, 300Mm Plinth Above The Ground Level With cement concrete 1:3:6 (Cement, Core Sand And Stone Grit) With Mufting As Per Drawing, Work Includes Back Filling & Proper Ramming By Providing All Required Grouting Materials, As Per Direction Of Site Incharge , Construction Of Tf Plinth Suitable For 250Kva (Size Of 2X2x 1.5 Mt.) As Per Drawing, cement concrete Work In Foundation In Ratio 1:4:8 (Cement, Sand & Brick Ballast). 1St Class Brick Work In Side Walls cement concrete Ratio Of 1:4 (Cement & Fine Sand). 12Mm Thick Plaster In Ratio 1:4 (Cement & Fine Sand). The Reinforced Cement Concrete Work On Top Of Plinth In Ratio 1:2:4 Are Duly Filling Of Brick Ballast Inside The Plinth & Ramming The Same, Including Cost Of All Material & Labour, As Per Direction O Site Incharge. , Construction Of Safety Fencing (Ms) For Transformer 11/0.4 Kv Sub Station, With Supply Of Material Required For Ms Fencing (50X50x3 Mm) M.S. Wire Mesh Construction Utilizing Vertical Post Duly Grouted/Fitted In Ground/On Floor. Horizontal Anglen-Iron To Be Fitted On Vertical Posts. Pickets (I Required) Fitted To Rail And Gate To Facilitate Entry And Exit. The Vertical Posts/Horizontal Post Shall Be Made Of M.S. Angle 75X75x6mm. Such Post Shall Be Kept Preferably At Distance Of 800-1000 Mm. And Shall Be Grounded With cement concrete Ratio 1:4:8. The Length Of Vertical Post Shall Be Sufficient To Take Care Of Fencing As Requirement At Site, And As Per Direction Of Site Incharge. , Providing & Fixing Of Danger Board, Including Fixing Of All Accessories By Providing All Required Materials (Like Suitable Nuts & Bolts Etc.) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Erection & Fixing Of 11Kv Fuse/Do Fuse Set Set On Plain Cement Concrete Pole, By Providing All Required Fixing Materials As Per Respo/Norms And As Per Direction Of Site Incharge. , Erection & Fixing Of 11Kv Tpmo Set On Plain Cement Concrete Pole, By Providing All Required Fixing Materials As Per Respo/Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of Stone Pad 300X300x75 Mm As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of Holding Clamp With Nut & Bolt As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of Alu. Lug 240 Sq.Mm.(Ls) Off Size As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing, Installing, Testing, And Commissioning Of Heavy-Duty Tail-Less Fuse Units (Lt Distribution/Bushing Bars) Of Approved Make, Rating, And Specifications Conforming Strictly To Respo Norms And Standard Electrical Designs; Work Includes Material Supply, Hoisting, Proper Alignment, Mounting Onto The Distribution Transformer Lt Bushings Or Dp Structure Steelwork, Making Solid, Low-Resistance Direct Connections, And Providing All Necessary Copper/Aluminium Links, Hardware, Nuts, Bolts, And Washers, Inclusive Of All Safety Gear, Specialized Labor, Tools, Tackles, Leads, And Lifts At Any Height, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing & Fixing Of Ms Angle & Ms Channel All Accessories By Providing All Required Materials (Like Suitable Nuts & Bolts Etc.) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing, Installing, Testing, And Commissioning Of Maintenance-Free Chemical Earthing System Of Approved Make And Design, Conforming Strictly To Respo Norms, Is 3043, And Ieee 80 Standards; Work Includes Augering/Boring An Earth Pit Of Required Diameter And Depth, Supplying And Lowering A High-Conductivity Copper-Bonded Steel / G.I. Earth Electrode Of Specified Length And Diameter, Completely Backfilling The Surrounding Void With Moisture-Retaining, Non-Corrosive Earth Enhancement Chemical Compound (Bentonite/Carbon Based) Mixed With Water As Per Manufacturer Guidelines, Constructing A Brick Masonry / Pre-Cast Concrete Inspection Chamber With A Heavy-Duty Ci/Concrete Cover Plate On Top, Providing An Integrated Copper/G.I. Terminal Busbar With Required Hardware For Down-Conductor Connectivity, And Conducting Final Earth Resistance Testing To Ensure Values Remain Well Within Permissible Electrical Limits, Inclusive Of All Excavation, Materials, Labor, Tools, And Tackles, Complete Under The Direction And Entire Satisfaction Of The Site In-Charge. , Propviding And Intallation All Requrment For Earthing Of Neutral By Boring And Lowering Of G.I. Pipe Size 32 Mm Dia... Into The Ground Up To Water Level 80 Fit. With The Lower End Of Solid Copper Cone Approx. 225Mm Long And 750 Gm. In Weight Shall Be Provided And In Pipe As Well As Bringing Out A Continuous Copper Wire 6 Swg From The Cone Up To The Ground Surface Where It Will Bc Bolted To The Nf.S. Earth Strip For Tif Neutral Connection, The Earth Strip *Vill Be Welded To The G.L. Pipe And Neutral Earthing Support, As Per Direction Of Site Incharge. , Jumpering And Line Energisation Work Properly As Per Respo Norms And As Per Direction Of Site Incharge.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
32.
Public Administrative Department #11310503 AOC
Tender for Supply Of Electrical Materials For The Repair And Maintenance Of Street Light , Details , T-5 Power/Energy Saver 2X24w Choke , T-5 Power/Energy Saver 24W Ftl Tuberod , 2X24 T5-Holder , T5 Power Saver 2X24 Fixture Acrylic Transparent Cover , T5 Power Saver 4X24 Fixture Acrylic Transparent Cover , 150W Hpsv Choke , 150W Hpsv Lamp , Capacitor 33Mfd 250Vac 50 Hz , Electronic Ignitor Suitable For 150W Hpsv Lamps , 150W Holder (Porcelain) , Led Driver 50W Bis Certified , Led Mcpcb Plate 60W , Led Mcpcb Plate 50W , Led Mcpcb Plate 150W , Supplyingof Isi Marked And Approved Make Of Moulded Case Circuit Breaker(Mccb) Suitable For 3Phase,3Pole,50Hz,415 Volts, Ac Supply With Respective Interrupting Capacity(Ka) At 415 Volts Cited Against Their Range Standard Conforming To Is - 8828: 8.1Mccb With Breaking Capacity 25 Ka At 415 V: Current Rating -125 Amps & 70% -100% Adjustable , Supply Of Sovp Device Should Have Single High Capacity Varistor In The L-N Plug And Encapsulated Spark Gap For N-Pe, L-N Sovp Should Have A Rated Voltage Of Minimum 320V Ac To Handle Indian Power Supply Conditions. Sovp Should Have Visual Indication On Replaceable Varistor And Spark Gap Modules As Well As A Potential Free Contact On The Socket For Remote Indication. Sovp Device Should Be Wired Up As Per Tt Configuration Of Wiring In Accordance With En 61643-11 Standards. Both The L-N And N-Pe, Spds Should Be Rated For Handling 30Ka Of Nominal 8/20 Μs Surge Current.: Sovp For Pole Light Sub Feeder Panels - Type 2 Pluggable Spd 3+1, Rating L-N/N-Pe Uc 255/320 V In 30/60Ka Ka, Lmax 30Ka/60 Ka, Up 1.5Kv , Supplying Of Isi Marked And Accepted Standard Of Miniature Circuit Breaker(Mcb)Ofcseries Suitable For 240/415Volts,50Cycle,10 Ka Value Ac Supply Confirming To Is:8828:1996,Iec:60898 :2002 But Without Enclosures: Single Pole 63 Amp. , Astronomical Timer With Dst Feature , Contactor 3 Pole 90 annual periodical maintenance 50Hz 415Volts With No-Nc Contacts , Tpn Connector 150A , Supply Of Approved Make Powder Coated Sheet Steel Encloser Spn Mcb Db Inclusive Of Busbar,Neutral Bar,Earth Bar & Two Earth Terminals Etc. Complete As Per Is:13032 (Exclusive Of Mcb & Isolator): 8 Way Double Door , Supply Of Sovp Device Should Have Single High Capacity Varistor In The L-N Plug And Encapsulated Spark Gap For N-Pe, L-N Sovp Should Have A Rated Voltage Of Minimum 320V Ac To Handle Indian Power Supply Conditions. Sovp Should Have Visual Indication On Replaceable Varistor And Spark Gap Modules As Well As A Potential Free Contact On The Socket For Remote Indication. Sovp Device Should Be Wired Up As Per Tt Configuration Of Wiring In Accordance With En 61643-11 Standards. Both The L-N And N-Pe, Spds Should Be Rated For Handling 30Ka Of Nominal 8/20 Μs Surge Current.: Sovp For Pole Light - Type 2 Pluggable Spd 1+1, Rating L-N/N- Pe Uc 230/400 V In 5 Ka, Imax 10 Ka, Up 1.2Kv , Led Batten Tubelight 20W , Supplying Of Approved Make Tpn Mcbdb Metal Double Door With Provision For Fpmcb/Isolator/Rccb/Rcbo As Incomer And Sp Mcbs As Outgoing Inclusive Of Busbar,Neutral Bar,Earth Bar & Two Earth Terminals Etc. Complete As Per Is:13032 (Exclusive Of Mcb & Isolator ): 8 Way (8+24) , 8 Sq.Mm Multistrand Pvc Insulated Copper Wire Bundle 90Mtr , 1.Sq.Mm Aluminium Single Core Wire Bundle Of 100Mtr. Isi Marked , Xlpe Insulated Power Cable( Conforming Is-7098 Part-1) 1100 Volt Grade 2-Core Isi Marked With Alu. Stranded/Solid Conductor: 16 Sq.Mm Unarmoured , Xlpe Insulated Power Cable( Conforming Is-7098 Part-1) 1100 Volt Grade 4-Core Isi Marked With Alu. Stranded/Solid Conductor: 16 Sq.Mm Unarmoured , Xlpe Insulated Power Cable( Conforming Is-7098 Part-1) 1100 Volt Grade 1-Core Isi Marked With Alu. Stranded/Solid Conductor: 25Sq.Mm Unarmoured , Wooden Ladder 21Ft , Toolkit Set Consisting Of Different Sizes L-Keys, Screw Drivers, Testers And Plier Set. , Taperoll Box Consisting Of 30Pcs (Conforms To Is: 7809 (Part 3, Sec 1),Self Extinguishing,Protects From Electrolytic Corrosion,Excellent Water Resistance,Suitable For Primary Insulation Up To 440V)
Contract Date: Jun 29, 2026 Contract Value : 60,699
Local Bodies No of Bidders 3
Madhya Pradesh View Result →
33.
Defence #11309414 AOC
Bids Are invited for Cat 6 Cable Side Board Diamond Design Tv Table - Dimension 80 Cms X 135 Cms X 45 Cms Material Solid Teak Shisham Wood With Natural Finishing Two Year Manufacture Warranty Termite Resistance And Water Resistance , Bar Trolly - Dimension 90 Cms X 60 Cms X 66 Cms Material Solid Teak Shisham Wood With Natural Finishing Two Year Manufacture Warranty Termite Resistance And Water Resistance , Folding Corner - Dimension 64 Inch X 25 Inch X 17 Inch Material Solid Teak Shisham Wood With Natural Finishing Two Year Manufacture Warranty Termite Resistance Water Resistance Design Corner Shelf 4 Tiers Space Efficiency Corner Folding Design , Peg Table - Dimension 45 Cms X 45 Cms X 45 Cms Material Solid Teak Shisham Wood With 18 Mm Glass Two Year Manufacture Warranty Termite Resistance Water Resistance , Bed Side Table - Dimension 65 Cms X 40 Cms X 45 Cms Material Solid Teak Shisham Wood With Natural Finishing Two Year Manufacture Warranty Termite Resistance Water Resistance Item Weight 10 Kg 3 Mordern Drawer With Handle Beside Table Storage Cabinet , Centre Table - Dimension 110 Cms X 60 Cms X 45 Cms Material Solid Teak Shisham Wood With Natural Finishing Two Year Manufacture Warranty Termite Resistance Water Resistance , Dining Table With 04 Chair - Dimension Dining Table 46 Inch X 30 Inch X 30 Inch Dimension Chair 36 Inch X 18 Inch X 18 Inch Material Solid Teak Shisham Wood With Natural Finishing Two Year Manufacture Warranty Termite Resistance Water Resistance Item Weight 80 Kg Size 4 Seater Product Material High Grade Teak Wook , Cardless Mike - 2 Wireles Microphone 1 C Type Port Receiver 2 Sponge Head 2 Wind Proof Plush Head 1 Cahrger Cable 3 Level Adjustable Noise Reduction Mike Wireless 4 Mode Setting , Welding Holder - Dimension 26 Cms X 08 Cms 10 Cms Weight 650 Grams Dual Heat Setting 400W And 800W Isi Approved Shock Proof Abf Body , Room Heater Small - Power 800 Wts Two Heading Rods Dual Heat Setting 400W 800W Isi Approved Shocjk Proof Abf Body , Gopi Heat Pillar - Dimension 840Mm X 165 Mm X 190 Mm 1500 Watt Prima Isi Standard Two Heading Rods Dual Head Setting Shock Proof Abf Body Adjustable Thermostate And Safety Grill , Cat 6 Cable 305 Mtr - 1000 Mbps Speed Cat 6 Connector Type Lan Cable Should Be Compatible With Laptop Computer Smartwatch Cctv Router Switches Total Quantity : 46
Contract Date: Ref. Documents Contract Value : 1.99 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Jammu and Kashmir View Result →
34.
Power #11308038 Technical Bid
Tender For Supply Of Plc Spares Per Nit Annexure-Ia , Belt Sway Switch Type Sw-4020T22 (Make Jayashree-Electro Devices Pvt. Ltd., Upgraded Model . Field Mounted Type Along With Base Plate. Contact -2No+2Nc, Voltage Rating 230/240 Vac Current Rating -10A, 50 Hz. Switch Action-Auto/ Spring Reset Additional Information: Enclosure -Weather Proof With Terminal Block Ip-66, Cast Aluminium Housing, Protection Class-Ip-65, Material Die Cast Aluminium ,Ball/Bush Bearing For Roller & Cam Shaft, Epoxy Painted./ , Pull Chord Switch , Type Sw-4020H22 (Make Jayashree-Electro Devices Pvt.Ltd.,( Equivalent To Type Sw-4020H22 Upgraded Model) Field Mounted Type Contact -2No+2Nc, Voltage Rating 230/240 Vac Current Rating -10A, 50 Hz. Switch Action-Auto/ Spring Reset Additional Information: Enclosure -Weather Proof With Terminal Block Ip-66, Cast Aluminium Housing, Protection Class-Ip-65, Material Die Cast , Vms- Terminal Connector ( Vibration Measuring Sensor ) Part Of Vibration Sensor Ce-680 , Glass Fuse 0.5 Annual Periodical Maintenance For Plc Panels , Siren -Hooter- Specification Ms-190 Siren- Hooter , 24 V-Dc Sound Range 100 Mtrs , Heavy Duty Limit Switch, Identical And Interchangeable With Ag Make Limit Switch, Type-Hls-Ll, Contact-2No+2Nc, Voltage Rating 110/240 V Ac Current Rating -10A,50 Hz. Enclosure-Cast Aluminium Housing. Protection Class-Ip-65, Material Die Cast Aluminium Epoxy Painted. , Rtd Element Type: Pt100/Duplex Temperature Coefficient Of Resistance:0.00385O/°C, Configuration Wire:3, Immersion Lenght:33Mm Stem Dia:06Mm, Spring Length=23Mm, Additional Information: Wire Length -10 Mtrs , Cable Harness For Vibration Sensor For Ring Granulators (Coal Crushers With Allied 2 Pin Connectors (Ms3106f10sl-4S), Cable Length-10 Meter. Detailed Specification:- A) Two Core Copper, Ptfe (Teflon) Insulated Spc-Ee(1000V). B) Ptfe Jacketed. C) Threaded Connector (Ms3106f10sl-4S) To Flying Leads. D) Cable Length-10 Mtrs. Standard-Jss-51034 And Jss-51038 , Pull Chord Wire Rope Dia -5.5+/0.5 Mm, 6*7 Construction Galvanised Wire With Pvc Cover And Bunched Around Jute Thread In The Core. Diameter Of Galvanised Wire-03Mm And Diameter Of Pvc Cover 02 To 03Mm
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
35.
Heavy Industries and Public Enterprises #11307960 Technical Bid
Tender for Inviting Rates For Spare Parts And Repairing/Servicing Of Laptop/Computer/Printer/Ups, Different Types Of Cable For Computer Hardware, Stationary Items, General Items, Printer Cartridge, Photocopy And Rented Vehicle & Coolers. , Head Name - Computer Hardware , Com&Lap - Antivirus 1 Years , Com&Lap - Antivirus 3 Years , Com&Lap - Bios Battery , Com&Lap - C - Port To Hdmi , Com&Lap - C - Port To Lan , Com&Lap - Cabinet - Atx , Com&Lap - Cordless Keyboard , Com&Lap - Cordless Mouse , Com&Lap - Cpu Cooling Fan , Com&Lap - Desktop Computer Ram Ddr21gb , Com&Lap - Desktop Computer Ram Ddr22gb , Com&Lap - Desktop Computer Ram Ddr24gb , Com&Lap - Desktop Computer Ram Ddr32gb , Com&Lap - Desktop Computer Ram Ddr34gb , Com&Lap - Desktop Computer Ram Ddr48gb , Com&Lap - Desktop Harddisk 128 Gb , Com&Lap - Desktop Harddisk 256 Gb , Com&Lap - Desktop Harddisk 512 Gb , Com&Lap - Desktop Harddisk 1Tb , Com&Lap - Desktop Mother Board Board 945 , Com&Lap - Desktop Mother Board I3 , Com&Lap - Desktop Mother Board I5 , Com&Lap - Desktop Mother Board I7 , Com&Lap - Desktop Processor C2d , Com&Lap - Desktop Processor Dual Core , Com&Lap - Desktop Processor I3 , Com&Lap - Desktop Processor I5 , Com&Lap - Desktop Processor I7 , Com&Lap - Dvd Writter For Desktop , Com&Lap - Formating Charges , Com&Lap - Keyboard - Pin , Com&Lap - Keyboard - Usb , Com&Lap - Lan Card (Usb To Lan) , Com&Lap - Laptop Battery , Com&Lap - Laptop Charger , Com&Lap - Laptop Dvd Writter , Com&Lap - Laptop Harddisk 128 Gb , Com&Lap - Laptop Harddisk 256 Gb , Com&Lap - Laptop Harddisk 512 Gb , Com&Lap - Laptop Harddisk 1Tb , Com&Lap - Laptop Keyboard , Com&Lap - Laptop Processor & Board , Com&Lap - Laptop Ram Ddr2 1 Gb , Com&Lap - Laptop Ram Ddr2 2 Gb , Com&Lap - Laptop Ram Ddr2 4 Gb , Com&Lap - Laptop Ram Ddr3 2 Gb , Com&Lap - Laptop Ram Ddr3 4 Gb , Com&Lap - Laptop Ram Ddr4 4 Gb , Com&Lap - Laptop Ram Ddr4 8 Gb , Com&Lap - Laptop Touchpad , Com&Lap - Mouse Pad , Com&Lap - Mouse- Pin , Com&Lap - Mouse - Usb , Com&Lap - Pce Lan Card , Com&Lap - Pendrive 32 Gb , Com&Lap - Pendrive 64 Gb C Type Usb3.0 Otg , Com&Lap - Pendrive 64 Gb , Com&Lap - Smps 450W , Com&Lap - Smps 650W , Com&Lap - Smps Slim 450W , Com&Lap - Ssd 256 Gb Laptop And Desktop , Com&Lap - Ssd 512 Gb Laptop And Desktop , Com&Lap - External Ssd 256 Gb For Laptop And Desktop , Com&Lap - External Ssd 512 Gb For Laptop And Desktop , Com&Lap - External Ssd 1 Tb For Laptop And Desktop , Com&Lap - External Ssd 2 Tb For Laptop And Desktop , Com&Lap - External Ssd 4 Tb For Laptop And Desktop , Com&Lap - Ssd Nvme 256 Gb Laptop And Desktop , Com&Lap - Ssd Nvme 512 Gb Laptop And Desktop , Com&Lap - Ssd Nvme 1 Tb Gb Laptop And Desktop , Com&Lap - Usb Extension 4 Port , Com&Lap - Crt Est , Com&Lap -Crt Memory Ic Chip , Com&Lap - Crt Picture Tube , Com&Lap -Crt Power Supply Unit , Com&Lap -Crt Repairing & Service Charge , Com&Lap - Tft Picture Gum , Com&Lap - Tft Power Supply Unit , Com&Lap -Tft Repairing & Service Charge , Com&Lap - Tft Screen , Com&Lap - Cat6 Cable , Com&Lap - Convertor Hdmi To Vga , Com&Lap - Convertor Vga To Hdmi , Com&Lap - Power Cable For Desktop , Com&Lap - Power Cable For Laptop , Com&Lap - Power Cable For Printer , Com&Lap - Data Cable For Printer , Com&Lap - Vga Cable For Desktop , Com&Lap - Hdmi Cable 1 Mtrs , Com&Lap - Hdmi Cable 3 Mtrs , Com&Lap - Hdmi Cable 5 Mtrs , Com&Lap - Hdmi Cable 10 Mtrs , Com&Lap - Hdmi Cable 15 Mtrs , Com&Lap - Hdmi Cable 30 Mtrs , Com&Lap - Wifi Usb Mini Adapter , Usb To Rj 45 Ethernet Lan Adopter , C Type To Rj 45 Ethernet Lan Adopter , Com&Lap - Ms Office Home & Student 2021 , Com&Lap - 19 Inch Monitor (Tft) , Com&Lap - 27 Inch Monitor (Led) , Entry Level Printer - Adf Pickup Pad , Entry Level Printer - Drum Unit , Entry Level Printer - Ccd Unit , Entry Level Printer - Cap Hinges , Entry Level Printer - Control Pannel , Entry Level Printer - Dc Controller , Entry Level Printer - Drum Blade , Entry Level Printer - Fuser Unit , Entry Level Printer - Fuserdrum Gear , Entry Level Printer - Gear Assembly Unit , Entry Level Printer - Hbps Card , Entry Level Printer - Heat Roller , Entry Level Printer - Logic Card , Entry Level Printer - Lsu Unit , Entry Level Printer - Megnet , Entry Level Printer - Motor , Entry Level Printer - Paper Tray , Entry Level Printer - Pick Pad , Entry Level Printer - Pressor Roller , Entry Level Printer - Repairing & Service Charhes , Entry Level Printer - Scanner Unit , Entry Level Printer - Sensor Unit , Entry Level Printer - Sepration Paid , Entry Level Printer - Smps , Entry Level Printer - Teflon , Entry Level Printer - Solenoid (Relay) , Mfd Printer - Adf Pickup Roller , Mfd Printer - Drum Unit , Mfd Printer - C.C.D Unit , Mfd Printer - Cap Hinges , Mfd Printer - Control Pannel , Mfd Printer - Dc Controller , Mfd Printer - Drum Blade , Mfd Printer - Fuser Unit , Mfd Printer - Fuserdrum Gear , Mfd Printer - Gear Assembly Unit , Mfd Printer - Hbps Card , Mfd Printer - Heat Roller , Mfd Printer - Logic Card , Mfd Printer - Lsu Unit , Mfd Printer - Megnet , Mfd Printer - Motor , Mfd Printer - Paper Tray , Mfd Printer - Pick Roller , Mfd Printer - Pressor Roller , Mfd Printer - Repairing & Service Charhes , Mfd Printer - Scanner Unit , Mfd Printer - Sensor Unit , Mfd Printer - Sepration Paid , Mfd Printer - Smps , Mfd Printer - Teflon , Mfd Printer - Solenoid (Relay) , Ups - Invertor Card , Ups - Battery Charger (Heating Bridge) , Ups - Mospet , Ups - Resistance , Ups - Main Power Transformer , Ups - Capicitor , Ups - Inductor , Ups - Diode , Ups - Ic555 , Ups - Ic808 , Ups - Invertor Switch , Ups - Repairing & Service Charges Per Ups 500Va /650Va/ 750Va / 800Va/1000 Va , Ups - Battery - 7 Ah, 12 Volts, Smf , Head Name - Stationery Items , Printing Paper A4 (75 Gsm) , File Cover (Card Board Office File Cover, Paper Size: Fullscape) , File Pad (Cardboard Office File Pads) , All Pin Stanless Steel , Whitener Correction Pen 4 Inch , Pencil Black 6 Inch , Stapler Pin No 10 1M , Stapler Pin No 24/6 1M , Stapler N10 , Size: 4 Inch , Stapler Hp 45, Size: 7 X 3 X 17.5 Centimeters , Stapler Heavy Duty ,Stapling Capacity: 210 Sheets , Stapler Pin 23/10-H , Note Sheet Paper A4 Size , U Shape Paper Pin/Gems Clip , Stamp Pad Blue For Stamping Purpose Size 110Mmx70mm , Stamp Pad Blue For Stamping Purpose Size9.5 Cm X 5 Cm , Envelope White Paper For Letter, Courier And Documents, 90 Gsm, Size - 9 X 4 Inches , Envelope Yellow Inside Laminated11x5 Inch , White Board Marker Pen , Highlighter Pen For Marks Highlight Text-Line , Notes Paper Flags Re-Stick (25Mm X 75Mm) - 4 Colours , Magnetic Pin Cushion 7X4(Hxl)Mm , Stock Book With Amount Column - Hard Bound - Register Size - 32 X 20 Cm (90 Pages - Pack Of 1) , Gum Bottle 300Ml , Gum Bottle 700Ml , File Tag Thread Green 20 X 18 X 1 Centimeters (100 No) , File Tag Thread For Paper Binding - 6 Inch, White (100 No) , Dak-Pad (F/S Or Legal Size: 14.5 X 10 Inch) , Invert/Dispatch Register Etc. (Dispatch - 72Gsm 275 Pages) , Single Line Long Register (100 Pages) , Register 6Qr 16X26 Cm 400 Pages , Register 4Qr 16X26 Cm 200 Pages , Register 8Qr , 80 Gsm , Rubber Eraser For Pencil (Pack Of 10) , Bill Register 65 Gsm Green Ledger Paper, - Dimensions: 19.5 X 32.5 Cm( 4 Qr) , Shorthand Copy 100 Pages , Poker(Tocha) Plastic Handle 8 Inch , Steel Scale 12 Inch , Plastic Scale 12 Inch , Gel Pen 0.55Mm 10Pen Box Pack , Motor Vehicle Log Book - Hard Bound - 20 X 16 Cm , Self Adhesive Transparent Tapes 2.5Inchx65meters , Cello Tape 1 Inch 65M (Transparent) , Self Adhesive Brown Cello Tape - 100 Meters In Length - 48Mm / 2 Width , Glass Paper Weight 51D X 40W X 51H Millimeters , White Correction Fluid 15Ml , Daily Attendance Register, 75 Pages , Desk Table Plastic 15 X 21 Inch Top With Foldable Transparent, Adjustable 7Mm Writing Desk Stand, Z-Type , Desktop Calculator 150 Steps Check And Correct With Tax & Gt Keys & On Display Indication Of Active Constant , Glue Stick 25Gm , Ball Pen 0.7 Mm , Plastic L Folder, Clear Transparent Size Legal, F/S, ( Set Of 10 Pcs ) , Multicolor Plastic Envelope File Folder 13 Inch X 11 Inch , Leather, Foam Convocation File Folder, A4 , Register 3Qr , Register 2Qr , Executive Diary (75 Gsm Dual Color), B5 Size, Dated Diary , Pen Stand Compartments Wooden With Visiting Card & Mobile Holder For Office Table (Min Size 175 Mm, 75 Mm, 100 Mm) , Contingent Register-200 Folio , Paper Cutter 9Mm , Metal Binder Clip Double Clip Size 51 Mm , Pencil Sharpener Steel Blade , Cash Book As Mptc 5, A3 Size, 100 Pages, Min 80 Gsm Paper , Single Line 5 Subject Spiral Notebook (14 X 21.6 Cm) 70 Gsm , Envelope Laminated Yellow Paper Legal Size | Poly Laminated Inside | 10 X 14 Inch , Envelope Laminated Yellow Paper A3 Size | Poly Laminated Inside | 10 X 14 Inch , A4 Size Envelop Laminated Yellow10 X 12 Inch , Letter Head 125 Gsm, White , Colour Flag 3 X 3 , Visiting Card , Cartridge Sheet (140Gsm) , Sketch Pen 12Shade Multi Colour , Jute Folder (A4 Size) , Leather Multipurpose File Folder (A4 Size) , Jute Office Bag ( 38L X 10W X 30H Cms ) , Bond Paper A4 (100 Gsm) , Colour Copy & Printing Paper A4 (100 Gsm) , Excellence White Printing Paper A4 (100 Gsm) , Paper Sheets A4 (140 Gsm) , Punching Machine 1 Hole, Punching Capacity : Minimum 60 Sheets , Punching Machine 2 Holes, Punching Capacity : Minimum 20 Sheets , Punching Machine 2 Holes, Punching Capacity : Minimum 60 Sheets , Poker (Tocha) Metal Handle 8 Inch , Scissors Steel 5 Inches , Scissors Steel 9 Inches , Head Name - General Items , Milk Powder For Tea 500 Gram Pack , Packaged Drinking Water 200 Ml , Packaged Drinking Water 500 Ml , Packaged Drinking Water 1 Ltr. , Green Tea - Detox/Desi Kahwa, 25 G (10 Bags X 2.5 G Each) , Honey Lemon Green Tea Bags, 35 G (25 Bags X 1.4 G Each) , Biscuit Butter/Cashew/ 50G Pack , Biscuit Tastier Sweet-Salty Crackers 75G Pack , Biscuits High Fibre 100G Pack , Sugar Cube, 500 G Pack , Sugar , Tea Premium With Long Leaves 500G , Coffee Pouch, 1Pcs Instant Coffee(60 X 1.67 G) , Samosha/Kachori , Khaman Dhokla 2 Pcs. , Chips 100 Gram , Mithai 500 Gram , Buttermilk (Matha/Chach) 250 Ml. , Namkeen 50 Gram , Lunch Or Dinner Thali ( Daal, Rice, Paneer Sabzi, Seasonal Veg, Curd Item, 5 Tawa Rotis, 1 Pcs. Sweet & Salad ) , Tea Cup Bone China White Color Gold Design 160 Ml , White Tea Cup Set Of 6, , Plate Bone Ash Free Quarter Plate 7.5(6 Pcs) , Serving Tray Platter Rectangular Plastic Tray 35L X 25W X 4H Centimeters , Electric Kettle 1.8L, Stainless Steel Inner Body - Auto Power Cut, Boil Dry Protection & Cool Touch Double Wall, Portable | 1500 Watts, Size- 24L X 20W X 28H Centimeters , Electric Kettle, Stainless Steel Quick Boil, 1 Ltr, 7.9L X 6.3W X 7.9H Centimeters , Transparent Water Glass Set Of 6 Pcs (300 Ml Each) Large Flame Proof Round Shape Glasses , Spoon Stainless Steel Set Length 16.6Cm (Medium, Set Of 12) , Tissue Paper 30X27 Cm (100 Sheets Per Pack) , Facial Tissue 2 Ply Soft Pack - 200 Pulls , Dishwash Bar, 125G , Air Freshener 48 G (Pack) , Room Freshener Spray (220 Ml) , Detergent Bar, 110 G , Mosquito Vaporiser Refill + Machine - 45Ml , Liquid Vaporiser Mosquito Repellent Refill 45 Ml , Tea Strainer Chai Chalni Stainless Steel , Thermos, Thermo Steel Vacuum Insulated 24 Hours Hot Or Cold Carafe, 1000 Ml , Handwash Refill - Skincare Hand Wash- 1500Ml Pack , Dishwash Liquid , 250 Ml Bottle , Men Raincoat Free Size , Umbrella- 54 Inch Heavy Duty , Pre Ink Stamp Small 1.2Cmx3.6Cm , Pre Ink Stamp Size 2.1Cmx5.7Cm , Cell Carbon Zinc Aa Battery - 10 Pieces , Cell Aaa Batteries - Pack Of 10 , Nameplate Fiber 6 X 12 , Double Side Name Plate , Name Plate Big Size 10 X 12 , Door Bell (Wireless) , Door Locks (Tala) , Plastic Open Dustbin, (8 L) , Plastic Pedal Dustbin , 10 L , 9 Watt Led , 12 Watt Led , Tube Light Led (15 Watt) , Electric Cable(3Colour) , Cooler Pad, Khus (4 Feet) , 3 Pintop (5A) , 3 Pintop(15A) , Gi Wire (1Kg) , Modular Socket (5Amp) , Socket Modular (5Amp) , Extension Board - 5 Power Sockets, 15 Amps 2Mtr , Extension Board - 5 Power Sockets, 15 Amps 3Mtr , Extension Board - 5 Power Sockets, 15 Amps 5Mtr , Wire 3 Cable Core , Office - Identity Card Pvc (Standard Size) With Card Holder & Strap , Round White Disposable Paper Plates Size : 6 Inches (Pack Of 50 Plates) , Disposable Wooden Spoons Length : 14 Cm. (Pack Of 100 Pcs.) , Head Name - Printer Cartridge (Original) , Toner Cartridge Canon 303 , Toner Cartridge H.P. 12A , Toner Cartridge H.P. 53A , Toner Cartridge H.P. 36A , Toner Cartridge H.P. 16A , Toner Cartridge Samsung108/104 , Toner Cartridge Samsung 1640 , Toner Cartridge Samsung 4720/1610 , Toner Cartridge Samsung 209 , Toner Cartridge Samsung 2161 , Toner Cartridge Samsung Scx 4521 Fs , Toner Canon Mf 248Dw , Toner Canon Mf 271 Dn , Hp Laser Jet M1212 Nf Mfd , Toner Canon 051 , Toner H P 77A , Toner H P 88-A , Toner Samsung 1043 , Toner Samsung 205 , Toner Canon 328 , Toner Canon 925 , Toner Cartridge Canon 326 , Toner Cartridge Samsung 101 , Toner Cartridge Samsung 116 , Toner Cartridge Canon 337 , Toner Cartridge Hp Lajer Mfp-136A , Toner Cartridge H.P. 110A , Toner Cartridge H.P. Mfd - 2606Dn , Toner Cartridge Brother- B-700D , Toner Cartridge H.P. Tower- 136A , Toner Cartridge - Canon - Image Class -Mf284dw - Cartridge- 072 , Toner Cartridge - Canon - Image Class -Mf271dn - Cartridge- 071 , Toner Cartridge - Canon - Image Class -Mf289dw , Toner Cartridge - Canon - Image Class -Mf643cdw - Cartridge- 054 (Kycm - Each) , Canon Ir 222N-Nb59 , Hp- Laser Jet -Mfp M-233Sdw , Samsung Mlt B48c602160 , Samsung Ml2161 , Samsung Ml 1640 , Samsung Scx 4521 Fs , Canon Mf 248 Dw , Canon Mf271dn , Canon Lbp 122 D , Canon Vrf 273 , Canon Mf 4820D , Canon Mf 240 4F Riit , Canon Image Class Mf 4820 D , Canon Lbp 6018 B , Canon Ic Mf 4820 D , Canon Ic 271 Dn , Canon Ic 241 Dw , Canon Image Runner 224 N , Canon Ic Lbd 122 Dw , Canon Mf 240 Series , Canon 643C Dw , Toner Cartridge 3060 , Image Class Mf 2410 , Image Class Mf 24 1 Dw , Image Class Mf-284Dw , Brother Dcp B7500d , H.P. Laser Jet Mfp M 4360N , H.P. Laser Jet Mfp 136 A , H.P. Laser Jet Tank Mfp 2606 Oix , H.P. Laser Jet M 1213 Mfd , H.P. Mf486 Dw , H.P. Toner Cartridge 158 , Toner Cartridge Brother 3060 , Toner Cartridge Hp -Mfp 436 Dn , Toner Cartridge Brother -B021 , Head Name - Photo Copy , Photo Copy On A4 Size Paper (With Min 75 Gsm Paper) , Photo Copy On A3 Size Paper (With Min 75 Gsm Paper) , Colour Printing Work On A4 Size Paper , Spiral Binding With Binding Covers A4 Size , Head Name - Rented Vehicle , Monthly Charge Of Vehicle For Maximum 800 Km (Sedan Car Of Max. Rs. 7.00 Lakh Ex Showroom Price) , Variable Charge For Journey Outside Headquarter Or Within Headquarters Beyond Maximum Limit , Head Name - Rented Cooler , Monthly Charge Of Air Cooler, Tank Capacity: 40 Ltr., Isi Marked , Monthly Charge Of Air Cooler, Tank Capacity: 75 Ltr., Isi Marked
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 7
Madhya Pradesh View Result →
36.
Housing Urban and Rular Development #11306856 AOC
Tender For M.O.W. Work (Additional Room) In Bunglow No. Eg-9/3 And Ek-9/3 Under Section No.1 Survey Sub Dn. Bhopal- 1 M.O.W. Work (Additional Room) in Bunglow No. EG-9/3 and EK-9/3 Under Section No.1 Survey Sub Dn. Bhopal 1st Call P.A.C. 29.64 Lakh,as per Building SOR wef 01-01-2024 Schedule Attached Complition period 90 Days Please Enable Macros to View BoQ information SCHEDULE OF ITEMS Name of work : M.O.W. Work (Additional Room) in Bunglow No. EG-9/3 and EK-9/3 Under Section No.1 Survey Sub Dn. Bhopal Probable Amount of contract : Rs. 29.64 Lacs. (Rs. in Figures) : Time Alloved : 6 months i/c rainy season S.No SOR Item Particulers of Item Unit Rate Remarks 2 2.4 2.4.1 beyond 30 cm girth up to and including 60 cm girth each 350.0 2.4.2 beyond 60 cm girth up to and including 120 cm girth each 1150.0 2.4.3 beyond 120 cm girth up to and including 240 cm girth each 3500.0 2.4.4 above 240 cm girth each 6300.0 3 2.7 2.7.1 Ordinary rock cum 287.0 2.7.2 Hard rock (requiring blasting) cum 519.0 2.7.3 Hard rock (blasting prohibited) cum 828.0 4 2.25 2.25.1 All kinds of soil. cum 30.0 2.25.2 Ordinary or hard rock. cum 53.0 2.26 Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete cum 672.0 Note: - Maximum thickness of this layer shall be 20 cm. 5 2.27 2.27.1 With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) cum 393.0 2.27.2 Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm cum 331.0 6 2.28 2.28.1 All kinds of soil. each 42.0 2.28.2 Ordinary rock each 68.0 2.28.3 Hard rock (requiring blasting) each 138.0 2.28.4 Hard rock (blasting prohibited) each 151.0 7 2.3 2.30.1 Along external wall where the apron is not provided using chemical emulsion@ 7.5 liters / sqm of the vertical surfaceof the substructure to a depth of 300mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. metre 36.0 2.30.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. metre 42.0 2.30.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. sqm 199.0 2.30.4 Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. metre 50.0 2.30.5 Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litresper hole by drilling 6 mm dia holes at downward angle of 45 degree at 150mm centre to centre and sealing the same. metre 201.0 8 2.41 2.42.1 Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. cum 331.0 9 4.1 4.1.1 With 20mm nominal size graded stone aggregate. 4.1.1.1 M-25 – Grade concrete cum 6338.0 4.1.1.2 M-20 – Grade concrete cum 4933.0 4.1.1.3 M-15 – Grade concrete cum 4471.0 4.1.1.4 M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) cum 3890.0 4.1.2 With 40mm nominal size graded stone aggregate. 4.1.2.1 M-15 - Grade concrete cum 4403.0 4.1.2.2 M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) cum 3808.0 4.1.2.3 M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate cum 3474.0 4.1.3 With fly ash. Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. 10 4.2 string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : 4.2.1 With 20mm nominal size graded stone aggregate 4.2.1.1 M-25 – Grade concrete Cum 6582.0 4.2.1.2 M 20 – Grade concrete Cum 5177.0 4.2.1.3 M 15 – Grade concrete Cum 4714.0 4.2.1.4 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Cum 4134.0 4.2.2 With 40mm nominal size graded stone aggregate 4.2.2.1 M-15 - Grade concrete cum 4647.0 4.2.2.2 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate cum 4052.0 11 4.3 4.3.1 Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. Sqm 169.0 4.3.2 above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. sqm 267.0 4.3.3 Above plinth: Columns, pillars, posts and struts. Sqm 356.0 12 4.6 4.6.1 M-25 (With 20mm nominal size graded stone aggregate) cum 5095.0 4.6.2 M-20 (With 20mm nominal size graded stone aggregate) cum 5558.0 4.6.3 M-15 (With 20mm nominal size graded stone aggregate) cum 5095.0 4.6.4 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. cum 4515.0 4.1 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). Sqm 200.0 13 5.1 5.1.1 M-20 Grade Concrete cum 6153.0 5.1.2 M-15 Grade Concrete cum 5397.0 14 5.2 5.2.1 M-20 Grade Concrete cum 6231.0 15 5.3 5.3.1 M-20 Grade Concrete cum 6541.0 16 5.4 5.4.1 M-20 Grade Concrete cum 5542.0 17 5.5 5.5.1 M-20 Grade Concrete cum 6906.0 18 5.6.1 5.6.1 M-20 Grade Concrete cum 6337.0 19 5.7.1 5.7.1 M-20 Grade Concrete cum 5448.0 20 5.9.1 5.9.1 Foundations, footings, bases of columns, etc. for concrete upto plinth level sqm 190.6 5.9.2 Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. 5.9.2.1 Uptoplinthlevel. sqm 219.0 5.9.2.2 Above plinth upto 3.6 m height from plinth level sqm 330.0 5.9.2.3 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. sqm 40.0 5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 439.6 5.9.4 Shelves(Cast in situ) sqm 290.0 5.9.5 Lintels, beams, girders, bressumers and cantilevers sqm 356.0 5.9.6 Columns, P i l l a r s , Piers, Abutments, sqm 471.2 Posts and Struts. 5.9.7 Stairs, (excluding landings) except spiral- Staircases. sqm 435.7 5.9.8 Spiral staircases (including landing). sqm 450.0 5.9.9 Arches, domes,vaults upto 6m span sqm 1141.6 5.9.10 Extra for arches, domes, vaults exceeding 6 m span sqm 451.3 5.9.11 Chimneys and shafts sqm 294.0 5.9.12 Coffer/waffle slab of any size or shape as shown in the drawing. sqm 1481.0 5.9.15 Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). sqm 0.2 5.9.16 Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. sqm 191.0 5.9.17 Cornices and mouldings sqm 565.0 5.9.18 Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. sqm 529.6 5.9.19 Weather shade, Chajjas, corbels etc., including Edges. sqm 534.2 5.9.20 Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of C.E./S.E. in case of B & R works . sqm 575.35 5.9.21 Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of C.E./S.E. in case of B & R works . sqm 521.2 21 5.1 5.10.1 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). sqm 212.0 22 5.12 5.12.1 50 mm thick sqm 790.0 5.12.2 40 mm thick sqm 689.0 5.12.3 25 mm thick sqm 598.0 23 5.16 5.16.1 Mild steel and Medium Tensile steel bars. kg 78 .00 5.16.2 Hard drawn steel wire kg 75.0 5.16.3 Cold twisted bars (CTD) kg 81.0 5.16.4 Hot rolled deformed bars kg 81.0 5.16.5 Hard drawn steel wire fabric kg 76.0 5.16.6 Thermo-Mechanically Treated bars.FE 500 D or more conforming to IS 1786 kg 80.0 5.16.7 Thermo-Mechanically Treated bars. FE 500 conforming .to IS 1786 kg 77.0 5.16.8 Corrosion resistance Steel bar Grade Fe-500 D & above , use with prior permission of C.E. Kg 98.0 24 5.22 5. 22.1 12 mm thick sqm 402.0 5. 22.2 25 mm thick sqm 574.0 5. 22.3 50 mm thick sqm 674.0 5.23 Providing and fixing sheet covering over expansion joints with iron screws as per design. 5. 23.1 Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 5. 23.1.1 150mm wide. RM 102.0 5. 23.1.2 200mm wide. RM 137.0 5. 23.1.3 250mm wide. RM 153.0 5. 23.2 Aluminium fluted strips 3.15mm thick. 5. 23.2.1 150 mm wide. RM 483.0 5. 23.2.2 200 mm wide. RM 646.0 5. 23.2.3 250 mm wide. RM 725.0 5. 23.3 Stainless steel Grade 304 plate-1.0 mm thick 5. 23.3.1 150 mm wide. RM 367.0 5. 23.3.2 200 mm wide. RM 443.0 5. 23.3.3 250 mm wide. RM 555.0 25 5.24 5.24.1 Preparation of grooves RM 18.5 5.24.2 Preparation of Drip course RM 30.0 26 5.32 5.32.1 Non pigmented wet curing compound sqm 93.0 5.32.2 Pigmented wet curing compound. sqm 100.0 27 6.1 6.1.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5818.0 6.1.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5626.0 28 6.2 6.2.1 Cement mortar 1:4 (1 cement : 4 sand) cum 6012.0 6.2.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5821.0 6.3 Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not lessthan 40kg /cm2 and water absorptionnot more than 15% in foundation and plinth i/c curing etc. complete. 6.3.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5252.0 6.3.2 Cement Mortar 1:6 (1 cement:6 sand). cum 5061.0 29 6.4 6.4.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5446.0 6.4.2 Cement Mortar 1:6 (1 cement:6 sand). cum 5255.0 30 6.5 6.5.1 Cement mortar 1:4 (1 cement : 4 sand) cum 4347.0 6.5.2 Cement Mortar 1:6 (1 cement: 6 sand). cum 4155.0 31 6.6 6.6.1 Cement mortar 1:4 (1 cement : 4 sand) cum 4541.0 6.6.2 Cement Mortar 1:6 (1 cement : 6 sand) cum 4350.0 32 6.7 6.7.1 Having 100 kg / cm2 average compressive strength. 6.7.1.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5384.0 6.7.1.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5162.0 6.7.2 Having 75 kg / cm2 average compressive strength. 6.7.2.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5271.0 6.7.2.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5049.0 6.7.3 Having 50 kg / cm2 average compressive strength. 6.7.3.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5158.0 6.7.3.2 Cement mortar 1:6 (1 cement : 6 sand) cum 4936.0 33 6.8 6.8.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5287.0 6.8.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5095.0 34 6.9 Cement Mortar 1:4 ( 1 cement : 4 sand) 35 6.12 6.12.1 Cement mortar 1:3 (1 cement : 3 sand) sqm 697.0 6.12.2 Cement mortar 1:4 (1 cement : 4 sand) sqm 673.0 36 6.13 6.13.1 Cement mortar 1:3 (1 cement : 3 sand) sqm 639.0 6.13.2 Cement mortar 1:4 (1 cement : 4 sand) sqm 615.0 37 6.14 6.14.1 Cement mortar 1:3 (1 cement : 3 sand) sqm 546.0 6.14.2 Cement mortar 1:4 (1 cement : 4 sand) sqm 522.0 38 6.15 6.15.1 Having 100 kg/cm2 average compressive strength. 6.15.1.1 Cement mortar 1 : 3 (1 cement : 3 sand) sqm 570.0 6.15.1.2 Cement mortar 1 : 4 (1 cement : 4 sand) sqm 551.0 6.15.2 Having 75 kg/cm2 average compressive strength. 6.15.2.1 Cement mortar 1 : 3 (1 cement : 3 sand) sqm 524.0 6.15.2.2 Cement mortar 1 : 4 (1 cement : 4 sand) sqm 505.0 6.15.3 Having 50 kg/cm2 average compressive strength. 6.15.3.1 Cement mortar 1 : 3 (1 cement : 3 sand) sqm 479.0 6.15.3.2 Cement mortar 1 : 4 (1 cement : 4 sand) sqm 459.0 39 6.37 6.37.1 Having100 kg / cm2 average compressive strength. 6.37.1.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5115.0 6.37.1.2 Cement mortar 1:6 (1 cement : 6 sand) cum 4904.0 6.37.2 Having75 kg / cm2 average compressive strength. 6.37.2.1 Cement mortar 1:4 (1 cement : 4sand) cum 5007.0 6.37.2.2 Cement mortar 1:6 (1 cement : 6sand) cum 4797.0 6.37.3 Having50 kg / cm2 averagecompressive strength. 6.37.3.1 Cement mortar 1:4 (1 cement : 4sand) cum 4900.0 6.37.3.2 Cement mortar 1:6 (1 cement : 6sand) cum 4689.0 40 9.3 9.3.1 Sal wood cum 76229.0 9.3.2 Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. cum 77538.0 9.3.3 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. cum 64833.0 41 9.4 9.4.1 Second class teak wood cum 9062.0 9.4.2 Sal wood cum 7131.0 9.4.3 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. cum 7275.0 9.4.4 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. cum 6030.0 9.5.4.1 35 mm thick sqm 1089.0 9.5.4.2 30 mm thick sqm 969.0 42 9.6 9.6.1 Second class teak wood sqm 2215.0 9.6.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood sqm 1763.0 9.6.3 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. sqm 971.0 9.6.4 Ply wood 5 ply, 9 mm thick : 9.6.4.1 Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. sqm 1439.0 9.6.4.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type sqm 1369.0 9.6.5 Ply wood 7 ply, 9 mm thick : 9.6.5.1 Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. sqm 1861.0 9.6.5.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type sqm 1650.0 9.6.6 Particle Board 12 mm thick 9.6.6.1 Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. sqm 791.0 9.6.6.2 Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. sqm 1087.0 9.6.6.3 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. sqm 1333.0 9.6.6.4 Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. sqm 1390.0 9.6.6.5 Coir Veneer Board (conforming to IS 14842) 12 mm thick sqm 1298.0 9.6.7 Float glass panes 9.6.7.1 4 mm thick glass pane (weight not less than 10 kg/sqm) sqm 973.0 9.6.7.2 5 mm thick glass pane (weight not less than 12.5 kg/sqm) sqm 1046.0 9.6.8 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading sqm 1532.0 9.6.8.1 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum sqm 580.0 9.6.8.2 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum sqm 754.0 43 9.14 9.14.1 Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. Sqm 170.0 9.14.2 ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. Sqm 53.0 44 9.15 9.15.1 Panelled or panelled and glazed shutters : 9.15.1.1 Using ISI marked anodised aluminium butt hinges with necessary screws. Sqm 2736.0 9.15.1.2 Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Sqm 2753.0 9.15.2 Glazed shutters : 9.15.2.1 Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. Sqm 2815.0 9.15.2.2 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Sqm 2759.0 45 9.16 9.16.1 12 mm thick Sqm 555.0 9.16.2 18 mm thick Sqm 654.0 46 9.17 9.17.1 18 mm thick Sqm 1270.0 9.17.2 25 mm thick Sqm 1383.0 47 9.18 9.18.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 2823.0 9.18.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 2648.0 9.18.3 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. Sqm 2465.0 48 9.19 9.19.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 1870.0 9.19.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 1696.0 9.19.3 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Sqm 1623.0 49 9.2 9.21 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Sqm 401.0 9.22 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : 9.22.1 Rectangular or square. Sqm 157.0 9.22.2 Circular. Sqm 244.0 50 9.25 9.25.1 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.1.1 Second class teak wood. Sqm 3174.0 9.25.1.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Sqm 2599.0 9.25.1.3 Kiln seasoned selected class of sheesham wood. Sqm 2452.0 9.25.2 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.2.1 Second class teak wood. Sqm 3291.0 9.25.2.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Sqm 2716.0 9.25.2.3 Kiln seasoned selected class of sheesham wood. Sqm 2569.0 9.25.3 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.3.1 Second class teak wood. Sqm 2797.0 9.25.3.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Sqm 2306.0 9.25.3.3 Kiln seasoned selected class of sheesham wood. Sqm 2179.0 9.25.4 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.4.1 Second class teak wood. Sqm 2914.0 9.25.4.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Sqm 2423.0 9.25.4.3 Kiln seasoned selected class of sheesham wood. Sqm 2296.0 9.26.2 30 mm thick shutters Sqm 2102.0 51 9.57 9.57.1 300x16 mm Each 170.0 9.57.2 250x16 mm Each 157.0 52 9.58 9.58.1 250x10 mm Each 68.0 9.58.2 200x10 mm Each 60.0 9.58.3 150x10 mm Each 42.0 9.58.4 100x10 mm Each 35.0 53 9.6 9.60.1 300x20x6 mm Each 72.0 9.60.2 250x20x6 mm Each 67.0 54 9.61 9.61.1 125 mm Each 27.0 9.61.2 100 mm Each 25.0 9.61.3 75 mm Each 24.0 55 9.62 9.62.1 150 mm Each 23.0 9.62.2 115 mm Each 20.0 9.62.3 90 mm Each 17.0 56 9.63 9.63.1 300 mm weighing not less than 200 gms. Each 40.0 9.63.2 250 mm weighing not less than 150 gms. Each 34.0 9.63.3 200 mm weighing not less than 120 gms. Each 28.0 57 9.65 9.65.1 300x16 mm Each 389.0 9.65.2 250x16 mm Each 326.0 9.65.3 400x16mm Each 601.0 58 9.66 9.66.1 250x10 mm Each 148.0 9.66.2 200x10 mm Each 93.0 9.66.3 150x10 mm Each 71.0 9.66.4 100x10 mm Each 50.0 59 9.68 9.68.1 300x20x6 mm Each 211.0 9.68.2 250x20x6 mm Each 173.0 9.69 Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : Each 9.69.1 125 mm Each 60.0 9.69.2 100 mm Each 54.0 9.69.3 75 mm Each 48.0 60 9.7 9.70.1 150 mm each 37.0 9.70.2 115 mm each 33.0 9.70.3 90 mm each 26.0 61 9.73 9.73.1 125x64x1.90 mm each 67.0 9.73.2 100X58X1.90 mm each 59.0 9.73.3 75x47x1.80 mm each 39.0 9.73.4 50x37x1.50 mm each 25.0 62 9.74 9.74.1 125x64x2.50 mm each 76.0 9.74.2 100x60x2.50 mm each 60.0 9.74.3 75x50x2.50 mm each 46.0 63 9.76 9.77 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 9.77.1 125x85x5.5 mm (heavy type) each 456.0 9.77.2 125x70x4 mm (ordinary type) each 148.0 9.77.3 100x85x5.5 mm (heavy type) each 387.0 9.77.4 100x70x4 mm (ordinary type) each 117.0 9.77.5 75x65x4 mm (heavy type) each 145.0 9.77.6 75x40x2.5 mm (ordinary type) each 74.0 9.77.7 50x40x2.5 mm (ordinary type) each 32.0 64 9.78 9.78.1 150x125x27x5 mm each 385.0 9.78.2 125x125x27x5 mm each 345.0 9.78.3 100x125x27x5 mm each 304.0 9.78.4 75x100x20x3.2 mm each 239.0 65 9.79 9.79.1 400x10 mm each 400.0 9.79.2 250x10 mm each 329.0 9.79.3 200x10 mm each 261.0 9.79.4 150x10 mm each 221.0 9.79.5 100x10 mm each 142.0 66 9.8 9.80.1 300x16x5 mm each 237.0 9.80.2 250x16x5 mm each 225.0 67 9.81 9.81.1 125 mm each 205.0 9.81.2 100 mm each 181.0 9.81.3 75 mm each 141.0 68 9.82 9.82.1 300x16mm each 407.0 9.82.2 250x16mm each 374.0 69 9.87 9.87.1 40 mm each 144.0 9.87.2 50 mm each 150.0 9.87.3 65 mm each 162.0 9.87.4 75 mm each 185.0 70 9.99 9.99.1 Size 40 mm each 144.0 9.99.2 Size 50 mm each 156.0 9.99.3 Size 65 mm each 167.0 9.99.4 Size 75 mm each 196.0 71 9.101 9.101.1 300x16mm each 268.0 9.101.2 250x16mm each 245.0 72 9.102 9.102.1 400X10mm each 260.0 9.102.2 300x10mm each 198.0 9.102.3 250x10mm each 164.0 9.102.4 200x10 mm each 113.0 9.102.5 150x10 mm each 91.0 9.102.6 100x10 mm each 73.0 73 9.103 9.103.1 300x16x5mm each 255.0 9.103.2 250x16x5mm each 243.0 74 9.108 9.108.1 125x75x4 mm each 115.0 9.108.2 125x63x4 mm each 108.0 9.108.3 100x75x4 mm each 95.0 9.108.4 100x63x4 mm each 93.0 9.108.5 100x63x3.2 mm each 90.0 9.108.6 75x63x4 mm each 77.0 9.108.7 75x63x3.2 mm each 75.0 9.108.8 75x45x3.2 mm each 67.0 75 9.109 9.109.1 300x16 mm each 241.0 9.109.2 250x16 mm each 195.0 76 9.11 9.110.1 400X10mm each 123.0 9.110.2 300x10 mm each 114.0 9.110.3 250x10 mm each 102.0 9.110.4 200x10 mm each 82.0 9.110.5 150x10 mm each 69.0 9.110.6 100x10 mm each 55.0 77 9.111 78 9.113 9.113.1 125 mm each 75.0 9.113.2 100 mm each 55.0 9.113.3 75 mm each 46.0 79 9.114 9.114.1 Single rubber stopper each 35.0 9.114.2 Twin rubber stopper each 86.0 80 9.116 81 9.117 82 9.126 83 9.127 84 9.128 85 9.129 9.129.1 Triple strip vertical type. each 28.0 9.129.2 Double strip (horizontal type). each 23.0 9.131 Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge. 9.131.1 300mm long each set 209.0 9.131.2 450mm long each set 256.0 9.131.3 500mm long each set 302.0 86 9.132 87 9.133 9.133.1 Marine plywood conforming to IS: 710 sqm 1591.0 9.133.2 Fire retardant plywood conforming to IS: 5509. sqm 1660.0 88 9.134.1 9.134.1 1.5 mm thick. sqm 851.0 89 9.134.2 90 9.138 9.138.1 12 mm thick. sqm 919.0 9.138.2 18 mm thick. sqm 1161.0 9.138.3 25 mm thick. sqm 1230.0 91 9.139 92 9.14 9.140.1 18 mm thick sqm 1493.0 9.140.2 25 mm thick sqm 2017.0 93 9.145 9.145.1 Board 12 mm thick sqm 811.0 9.145.2 Board 18 mm thick sqm 943.0 9.146 Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 9.146.1 18 mm thick sqm 1055.0 9.146.2 25 mm thick sqm 1420.0 94 9.147 95 9.148 96 9.15 9.150.1 12 mm thick commercial ply conforming to IS: 1328 BWR type. Sqm 1210.0 9.150.2 18 mm thick commercial ply conforming to IS: 1328 BWR type. Sqm 1320.0 97 9.158 9.158.1 Extruded section Profile size 48x40 mm. metre 203.0 9.158.2 Extruded section Profile size 42x50 mm. metre 208.0 98 9.165 99 9.166 9.166.1 Plain PVC door shutters. sqm 2026.0 9.166.2 Pre laminated PVC door shutters. sqm 2490.0 100 9.167 101 9.168 as panel. The styles andrails will be mitred cut and joint with the help of PVC solvent cement and self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mmand 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturers specifications and direction of Engineer-in-charge: 9.168.1 Non decorative finish. sqm 2026.0 9.168.2 Decorative finish (both side wood grained finish). sqm 2432.0 102 9.169 9.169.1 Single rebate (75 mm X 50 mm) RM 459.0 9.169.2 Single rebate (100 mm X50 mm) RM 720.0 9.169.3 Single or double rebate (125 mm X 65 mm) RM 923.0 103 9.17 9.170.1 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm 2250.0 9.170.2 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm 3250.0 9.170.3 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm 3693.0 9.170.4 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm 4135.0 104 9.186 105 9.187 9.187.1 Casement Window (Outward/Inward opening) with hinge System. 9.187.1.1 Frame (50 mm x 50mm) metre 422.0 9.187.1.2 Sash (Style and Rail) (62 mm x 34 mm) metre 403.0 9.187.1.3 Mullion (intermediate Section) (66mm x 50 mm) metre 434.0 9.187.1.4 ‘T Profile (one vertical length in between two shutters) (24mm x 34.5mm) metre 99.0 9.187.1.5 Glazing bead (12mm x 18mm) metre 130.0 9.187.2 Casement Window (With friction hinge and outward opening) 9.187.2.1 Casement Frame (67mm x 62mm) metre 495.0 9.187.2.2 Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) metre 519.0 9.187.2.3 Casement Glazing bead (35mm x 18 mm) metre 178.0 9.187.3 Sliding Window (Two Track, 2/4 Shutters) 9.187.3.1 Two Track Sliding Frame (67mm x 52mm) metre 9.187.3.2 Sliding window Sash (60mm x 44mm) metre 529.0 9.187.3.3 Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) metre 139.0 9.187.3.4 Sliding Glazing bead (35 mm x 18 mm) metre 178.0 9.187.4 Sliding Door (Two Track, 2/4 Shutters) 9.187.4.1 Two Track Sliding Frame (67mm x 52mm) metre 539.0 9.187.4.2 Sliding Door Sash (80mm x 44mm) metre 653.0 9.187.4.3 Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) metre 139.0 9.187.4.4 Sliding Glazing bead (35 mm x 18 mm) metre 178.0 106 9.188 9.188.1 200 x 19 x 1.9 mm each 321.0 9.188.2 250 x 19 x 1.9 mm each 369.0 9.188.3 300 x 19 x 1.9 mm each 462.0 9.188.4 350 x 19 x 1.9 mm each 526.0 9.188.5 400 x 19 x 1.9 mm each 636.0 107 9.189 108 9.191 109 9.192 110 9.193 111 9.194 9.194.1 Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) sqm 6798.0 9.194.2 Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). sqm 6221.0 9.194.3 Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). sqm 4842.0 9.194.4 Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) sqm 6681.0 9.194.5 Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) sqm 6942.0 9.194.6 Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion67 x 80 all having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) sqm 5290.0 9.195 Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. Afterfixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). 9.195.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) sqm 4860.0 9.196 Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made fromroll forming process of required length(shape & size according to UPVC profile),UPVC 9.196.1 Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). sqm 7085.0 9.196.2 Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±.0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). sqm 7063.0 9.197 Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profileof frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) 9.197.1 Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) sqm 5060.0 9.197.2 Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). sqm 6880.0 9.197.3 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). sqm 5134.0 9.197.4 Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area ofwindow above 1.75 sqm). sqm 6371.0 9.197.5 Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) sqm 5913.0 112 9.198 9.198.1 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto sqm 4332.0 4.00 sqm). 9.198.2 Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). sqm 3532.0 9.199 Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in- built roller track and sashextruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension UPVC extruded glazing beads, UPVC extruded interlock and UPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), 9.199.1 Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mmand single glazing bead / double glazing bead of appropriate dimension. (Area ofdoor above 2.00 sqm upto 10.00 sqm). sqm 3676.0 9.199.2 Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mmand single glazing bead / double glazing bead of appropriate dimension. (Area ofdoor above 8.00 sqm upto10.00 sqm). sqm 3810.0 9.199.3 Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) sqm 4361.0 9.199.4 Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mmand single glazing bead / double glazing bead of appropriate dimension. (Area ofdoor above 2.00 sqm upto 5.00 sqm) sqm 5617.0 9.2 Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S.frame shall have a coat of steel primers of approved make and manufacture.M.S. frame sqm 3908.0 113 9.201 9.201.1 24 to 25 mm thick plain solid PVC flush door shutter sqm 2250.0 9.201.2 28 to 30 mm thick plain solid PVC flush door shutter sqm 3229.0 114 9.202 9.202.1 1mm thick laminated sheet sqm 3693.0 9.202.2 0.12 mm thick laminated sheet sqm 3461.0 115 9.255 9.255.1 9 mm thick BWP grade commercial Sqm 841.0 plywood 9.255.2 12 mm thick BWP grade commercial Sqm 1064.0 plywood 9.255.3 18 mm thick BWP grade commercial Sqm 1169.0 plywood 9.255.4 25 mm thick BWP grade commercial Sqm 1366.0 plywood 116 9.256 9.256.1 25 mm outer dia & 300 mm long Each Set 984.0 9.256.2 32 mm outer dia & 450 mm long Each Set 1716.0 9.256.3 32 mm outer dia & 600 mm long Each Set 2041.0 117 9.257 9.196, 9.197, 9.198, 9.199) 118 9.258 9.258.1 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. sqm 1040.0 119 10.7 10.7.1 Exceeding 10.00 sqm and upto 16.80 sqm in the area. sqm 747.0 10.7.2 Exceeding 16.80 sqm in area. sqm 782.0 120 10.11 10.11.1 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). kg 77.0 121 10.12 10.12.1 Profile B of 1.60mm thick single rebate of size 80mmx50mm 10.12.1.1 Fixing with adjustable lugs with split end tail to each jamb. meter 402.0 10.12.1.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 394.0 10.12.2 Profile C of 1.60mm thick single rebate of size 100mmx50mm 10.12.2.1 Fixing with adjustable lugs with split end tail to each jamb. meter 431.0 10.12.2.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 424.0 10.12.3 Profile E of 1.60mm thick double rebate of size 115mmx50mm 10.12.3.1 Fixing with adjustable lugs with split end tail to each jamb. meter 472.0 10.12.3.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 464.0 10.12.4 Profile B of 1.25mm thick single rebate of size 80mmx50mm 10.12.4.1 Fixing with adjustable lugs with split end tail to each jamb. meter 356.0 10.12.4.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 348.0 10.12.5 Profile C of 1.25mm thick single rebate of size 100mmx50mm 10.12.5.1 Fixing with adjustable lugs with split end tail to each jamb. meter 385.0 10.12.5.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 377.0 10.12.6 Profile E of 1.25mm thick double rebate of size 115mmx50mm 10.12.6.1 Fixing with adjustable lugs with split end tail to each jamb. meter 414.0 10.12.6.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 406.0 122 10.14 10.14.1 Hot finished welded type tubes kg 117.0 10.14.2 Hot finished seamless type tubes kg 123.0 10.14.3 Electric resistance or induction butt welded tubes. kg 142.0 10.15 Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats ofEpoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. kg 132.0 123 10.17 124 10.18 125 10.19 126 10.21 127 10.22 10.22.1 In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. kg 101.0 10.22.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. kg 105.0 128 10.23 10.23.1 M.S. tube. kg 117.0 10.23.2 E.R.W. tubes. kg 132.0 129 10.25 130 10.26 10.26.1 Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides sqm 646.0 10.26.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. sqm 1334.0 131 10.27 10.27.1 With 4.0 mm thick glass panes sqm 792.0 10.27.2 With 5.50 mm thick glass panes sqm 873.0 10.27.3 With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. sqm 916.0 10.27.4 With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm boxbeading. sqm 611.0 10.27.5 With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. sqm 936.0 10.27.6 With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. sqm 750.0 10.27.7 With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. sqm 800.0 10.27.8 With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. sqm 872.0 132 10.28 10.28.1 With 4.0 mm thick glass panes. sqm 259.0 10.28.2 With 5.5 mm thick glass panes. sqm 262.0 133 10.29 134 11.19 11.19.1 Makrana white second quality. sqm 3051.0 11.19.2 Raj Nagar plain. sqm 1381.0 11.19.3 Agaria White/Morgarh sqm 1882.0 11.19.4 Katni marble sqm 1555.0 11.19.5 Black Zebra. sqm 1315.0 11.19.6 Udaipur / Baroda green marble sqm 1649.0 11.19.7 Pink plain marble. sqm 1448.0 11.19.8 Jaisalmer Yellow sqm 1582.0 135 11.2 11.20.1 Makrana white second quality. sqm 3675.0 11.20.2 Raj Nagar plain. sqm 1932.0 11.20.3 Agaria White/Morgarh sqm 2455.0 11.20.4 Katni marble sqm 2113.0 11.20.5 Black Zebra. sqm 1863.0 11.20.6 Udaipur / Baroda green marble sqm 2211.0 11.20.7 Pink plain marble. sqm 2002.0 11.20.8 Jaisalmer Yellow sqm 2141.0 136 11.21 11.21.1 Makrana white second quality. sqm 3773.0 11.21.2 Raj Nagar plain. sqm 2737.0 11.21.3 Agaria White/Morgarh sqm 2553.0 11.21.4 Katni marble sqm 2219.0 11.21.5 Black Zebra. sqm 1961.0 11.21.6 Udaipur / Baroda green marble sqm 2309.0 11.21.7 Pink plain marble. sqm 2100.0 11.21.8 Jaisalmer Yellow sqm 2240.0 137 11.22 11.22.1 Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black sqm 1797.0 11.22.2 Granite fine grained dark crystal of other colours and various patterns sqm 2356.0 11.22.3 Granite coarse grained light black/ light red/white with crystal of other colours and various patterns Sqm 2113.0 11.22.4 Granite grey/pink/brown with various patterns Sqm 1808.0 11.22.5 Cuddpah stone sqm 1279.0 138 11.23 139 11.24 140 11.25 141 11.29 11.29.1 Area of slab over 0.50 sqm 11.29.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2919.0 11.29.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2675.0 11.29.1.3 Gray/Pink/Brown or equivalent with various patterns sqm 2370.0 11.29.2 Area of slab upto 0.50 sqm 11.29.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2705.0 11.29.2.2 Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2486.0 11.29.2.3 Gray/Pink/Brown or equivalent with various patterns sqm 2212.0 142 11.3 11.30.1 Area of slab over 0.50 sqm 11.30.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2642.0 11.30.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2422.0 11.30.1.3 Gray/Pink/Brown or equivalent with various patterns sqm 2153.0 11.30.2 Area of slab upto 0.50 sqm 11.30.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2455.0 11.30.2.2 Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2258.0 11.30.2.3 Gray/Pink/Brown or equivalent with various patterns sqm 2011.0 patterns 143 11.32 144 11.33 11.33.1 Flamed Finish Granite sqm 2542.0 11.33.2 Leather Finish Granite sqm 2809.0 145 11.34 146 11.36 Note: - Deduction shall be made for not mirror polishing according to item no 11.43 147 11.37 148 11.38 11.38.1 10-12 mm thick sqm 1177.0 11.38.2 20 mm thick sqm 1231.0 149 11.39 150 11.4 11.40.1 Marble work meter 164.0 11.40.2 Granite work. meter 269.0 151 11.41 152 11.42 153 11.43 154 11.44 11.44.1 Red sand stone sqm 578.0 11.44.2 White sand stone sqm 578.0 11.44.3 Grey lime stone sqm 578.0 11.44.4 Kota stone sqm 678.0 155 11.47 156 11.48 157 11.49 158 11.52 159 11.53 160 11.54 161 11.55 162 11.56 163 12.63 11.63.1 Fastener with threaded dia 6 mm. each 25.0 11.63.2 Fastener with threaded dia 10 mm. each 29.0 11.63.3 Fastener with threaded dia 12 mm. each 46.0 164 11.66 165 11.72 proper embedding/ laying of inter locking paver blocks into the bedding layer through vibratory compaction byusing plate vibrator, filling the joints with sand and cutting of paver blocks as per required sizeand pattern, finishing and sweeping extra sand including locking with M15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturers specifications and direction of Engineer-in-Charge. 11.72.1 80 mm thick C.C. paver block of M-35 grade sqm 805.0 11.72.2 60 mm thick C.C. paver block of M-35 grade sqm 680.0 11.72.3 60 mm thick C.C. paver block of M-30 grade sqm 605.0 166 11.75 including fixing of granite stone door frame with epoxy resin based adhesive including secured to the backing by means of cramps, drilling of hole with rawl plugs and screws 75mm long cleaning etc. complete. Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge. 11.75.1 Granite Door frame for 100mm thick wall Thickness. metre 1010.0 11.75.2 Granite Door frame for 200mm thick wall Thickness. metre 1512.0 167 11.76 11.76.1 Plain ivory light shade sqm 950.0 Size 600X600mm thickness 9-10mm 11.76.2 Dark shade (terracotta) sqm 1033.0 Size 600X600mm thickness 9-10mm 168 11.77 11. 77.1 Plain ivory light shade sqm 940.0 Size 600X600mm thickness 9-10mm 11. 77.2 Dark shade (terracotta) sqm 1022.0 Size 600X600mm thickness 9-10mm 169 11.8 11.80.1 In light colour and shades as ivory, beige blanco, grey etc. 11.80.1.1 (a) Size 300X300 mm thickness 9-10 mm sqm 934.0 11.80.1.2 (b) Size 600X600mm thickness 9-10mm sqm 1206.0 11.80.1.3 (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) sqm 1349.0 11.80.2 In dark colour and shade etc. 11.80.2.1 (a) Size 300X300 mm thickness 9-10 mm sqm 946.0 11.80.2.2 (b) Size 600X600mm thickness 9-10mm sqm 1340.0 11.80.2.3 (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) sqm 1546.0 170 11.81 11. 81.1 In light colour and shades as ivory, beige blanco, grey etc. 11. 81.1.1 (a) Size 300X300 mm thickness 9-10 mm sqm 923.0 11. 81.1.2 (b) Size 600X600mm thickness 9-10mm sqm 1196.0 11. 81.2 In dark colour and shades etc. 11. 81.2.1 (a) Size 300X300 mm thickness 9-10 mm sqm 935.0 11. 81.2.2 (b) Size 600X600mm thickness 9-10mm sqm 1329.0 171 11.82 11. 82.1 For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) 11. 82.1.1 Size 600X600 mm thickness 9-10 mm sqm 1140.0 11. 82.1.2 Size 800X800mm thickness 9-10 mm sqm 1261.0 11. 82.1.3 Size 800X1600mm thickness 9-10 mm sqm 1489.0 11. 82.1.4 Size 1000X1000mm thickness 9-10 mm sqm 1388.0 11. 82.1.5 Size 600X1200 mm thickness 9-10 mm sqm 1235.0 11. 82.1.6 Size 800X1200 mm thickness 9-10 mm sqm 1450.0 11. 82.1.7 Size 1200X1200 mm thickness 9-10 mm sqm 1596.0 11. 82.1.8 Size 1200X1800mm thickness 9-10 mm sqm 1715.0 11. 82.1.9 Size 1200X2400 mm thickness 9-10 mm sqm 2403.0 172 11.83 11. 83.1 For skirting, riser, dado and wall lining etc.glossy/ rustic /stain/mattfinished in all colours and shades 11. 83.1.1 Size 300X600 mm thickness 9-10 mm sqm 1048.0 11. 83.1.2 Size 600X600 mm thickness 9-10 mm sqm 1129.0 11. 83.1.3 Size 800X800mm thickness 11-12mm sqm 1250.0 11. 83.1.4 Size 600X1200 mm thickness 11-12mm sqm 1224.0 11. 83.1.5 Size 800X1200 mm thickness 11-12mm sqm 1440.0 173 11.84 11. 84.1 Area of tiles not less 0.18 sqm 11. 84.1.1 Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter sqm 2296.0 11. 84.1.2 Course granite light Black/light Red/ off White with crystals of other colors and various patterns sqm 2113.0 11. 84.1.3 Gray/Pink/Brown with various patterns sqm 1879.0 174 11.85 11. 85.1 Area of tiles not less 0.18 sqm 11. 85.1.1 Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter sqm 1775.0 11. 85.1.2 Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns sqm 1610.0 11. 85.1.3 Gray/Pink/Brown with various patterns sqm 1404.0 175 11.97 Size 800X1600 mm thickness 8-9 mm Sqm 1778.0 176 11.102 177 11.103 178 12.4 12.4.1 0.80mm thick with zinc coating not less than 275gm/m² meter 500.0 12.4.2 0.63mm thick with zinc coating not less than 275gm/m² meter 431.0 179 12.7 12.7.1 0.80mm thick with zinc coating not less than 275gm/m² meter 459.0 12.7.2 0.63mm thick with zinc coating not less than 275gm/m² meter 402.0 180 12.12 12.12.1 Corrugated serrated adjustable ridges meter 367.0 12.12.2 Plain wing adjustable ridges meter 311.0 12.12.3 Close fitting adjustable ridges meter 420.0 12.12.4 Unserrated adjustable hips meter 506.0 181 12.13 12.13.1 Corrugated apron pieces meter 340.0 12.13.2 Eaves filler pieces meter 232.0 12.13.3 North light curves meter 500.0 12.13.4 ventilator curves meter 622.0 12.13.5 Barge boards meter 623.0 12.13.6 Ridge finials pair 229.0 12.13.7 Special north light curves each 753.0 12.13.8 S type louvers meter 418.0 182 12.14 183 12.15 primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 184 12.16 12.16.1 Ridges plain (500 - 600mm). meter 320.0 12.16.2 Flashings/ Aprons.( Upto 600 mm) meter 284.0 12.16.3 North light curves. meter 341.0 12.16.4 Barge board (Upto 300 mm) meter 274.0 12.16.5 Crimp curve sqm 315.0 12.16.6 Gutter. (600 mm over all girth) meter 781.0 185 12.17 12.17.1 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. sqm 1031.0 12.17.2 2mm thick flat. sqm 955.0 186 12.23 187 12.24 188 12.26 189 12.27 190 12.32 12.32.1 75 mm diameter (minimum wall thickness 1.8mm) metre 136.0 12.32.2 110 mm diameter (minimum wall thickness 2.2mm) metre 238.0 191 12.33 12.33.1 Coupler 12.33.1.1 75 mm (minimum wall thickness 1.8mm) each 67.0 12.33.1.2 110 mm (minimum wall thickness 2.2mm) each 102.0 12.33.2 Single push fit Coupler : 12.33.2.1 75 mm (minimum wall thickness 1.8mm) each 121.0 12.33.2.2 110 mm (minimum wall thickness 2.2mm) each 94.0 12.33.3 Single tee with door 12.33.3.1 75x75x75 mm (minimum wall thickness 1.8mm) each 106.0 12.33.3.2 110x110x110 mm (minimum wall thickness 2.2mm) each 176.0 12.33.4 Single tee without door 12.33.4.1 75x75x75 mm (minimum wall thickness 1.8mm) each 106.0 12.33.4.2 110x110x110 mm (minimum wall thickness 2.2mm) each 163.0 12.33.5 Bend 87.5° 12.33.5.1 75 mm bend (minimum wall thickness 1.8mm) each 78.0 12.33.5.2 110 mm bend (minimum wall thickness 2.2mm) each 112.0 12.33.6 Shoe (Plain) 12.33.6.1 75 mm Shoe (minimum wall thickness 1.8mm) each 69.0 12.33.6.2 110 mm Shoe (minimum wall thickness 2.2mm) each 99.0 192 12.34 12.34.1 75 mm (minimum wall thickness 1.8mm) each 97.0 12.34.2 110 mm (minimum wall thickness 2.2mm) each 114.0 hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in adirection perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.58.1 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board. 12.58.1.1 Flat surfaces sqm 676.0 12.58.1.2 Curved surfaces sqm 748.0 12.58.1.3 Sunk or raised mouldings sqm 175.0 12.58.1.4 Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. sqm per meter height 59.0 12.58.2 12.5 mm thick tapered edge gypsum board 12.58.2.1 Plain board conforming to IS: 2095- Part I: 2011 (Board with BIS certification marks). sqm 750.0 12.58.2.2 Fire resistant Glass ReinforcedGypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) sqm 866.0 12.58.2.3 12.5mm thick moisture resistant gypsum plasterboards Moistbloc as per BS EN 520 confirming to water absorption class H1 with total water absorption < 5%, Green Pro certified by CII sqm 920.0 12.58.2.4 Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturersspecification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. sqm 1277.0 12.58.3 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured throughautoclaving process. sqm 1150.0 193 13.1 13.1.1 1:4 (1 cement : 4 sand) sqm 173.0 13.1.2 1:6 (1 cement : 6 sand) sqm 160.0 194 13.2 13.2.1 1:4 (1 cement : 4 sand) sqm 184.0 13.2.2 1:6 (1 cement : 6 sand) sqm 168.0 195 13.3 13.3.1 1:4 (1 cement : 4 sand) sqm 245.0 13.3.2 1:6 (1 cement : 6 sand) sqm 225.0 196 13.4 13.4.1 1:3 (1 cement : 3 sand) sqm 210.0 13.4.2 1:4 (1 cement : 4 sand) sqm 203.0 197 13.5 13.5.1 1:3 (1 cement : 3 sand) sqm 236.0 13.5.2 1:4 (1 cement : 4 sand) sqm 220.0 198 13.13 199 13.14 200 13.15 13.15.1 Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof sqm 34.0 13.15.2 Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof sqm 22.0 201 13.16 13.16.1 In one coat sqm 11.0 13.16.2 In two coats sqm 18.0 202 13.17 13.17.1 In one coat sqm 158.0 13.17.2 In two coats sqm 260.0 203 13.18 13.18.1 Spherical ceiling sqm 42.0 13.18.2 Groined ceiling sqm 47.0 13.18.3 Flewing soffits sqm 28.0 204 13.38 205 13.39 13.39.1 Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. sqm 130.0 13.39.2 Extra for making 12mm flute grove with 6 mm depth to prepare the surface even and smooth complete. metre 70.0 206 13.41 207 13.43 208 13.44 209 13.45 210 13.46 211 13.47 13.47.1 One coat. sqm 20.0 13.47.2 Two coats. sqm 32.0 212 13.48 13.48.1 One coat. sqm 37.0 13.48.2 Two coats. sqm 56.0 213 13.49 214 13.51 215 13.52 216 13.53 217 13.54 218 13.54.1 219 13.54.2 220 13.54.3 221 13.55 13.55.1 One coat sqm 63.0 13.55.2 Two coats sqm 101.0 222 13.64 223 13.65 224 13.66 13.66.1 One coat. sqm 35.0 13.66.2 Two coats. sqm 53.0 225 13.68 226 13.71 227 13.77 228 13.8 13.80.1 0.8-1.2mm thickness sqm 368.0 13.80.2 2.0-2.5mm thickness sqm 338.0 229 13.81 effective for 90 Days(03 Months) . 230 13.103 Note:- Applicable to item No. 13.1 to item No. 13.10 231 13.105 13.105.1 Standard pattern and design wallpaper Sqm 615.0 13.105.2 3D pattern and design wallpaper Sqm 750.0 13.105.3 Customize design wallpaper Sqm 1145.0 232 14.5 14.5.1 Float glass panes of thickness 4 mm sqm 679.0 14.5.2 Float glass panes of thickness 5.5 mm sqm 759.0 233 14.6 14.6.1 Float glass panes of thickness 4 mm sqm 801.0 14.6.2 Float glass panes of thickness 5.5 mm sqm 882.0 234 14.7 14.7.1 Float glass panes of thickness 4 mm sqm 697.0 14.7.2 Float glass panes of thickness 5.5 mm sqm 778.0 235 14.8 14.8.1 2nd class teak wood fillets meter 30.0 14.8.2 Haldu/Bija/Kail wood fillets. meter 26.0 236 14.11 237 14.24 238 14.27 239 14.28 240 14.29 241 14.31 242 14.36 243 14.37 244 14.38 245 14.39 246 14.48 247 14.49 14.49.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. sqm 42.0 14.49.2 Old work (one or more coats @ 2.20 kg/10 sqm) complete. sqm 30.0 248 14.51 14.51.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). sqm 87.0 14.51.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm). sqm 52.0 249 14.52 14.52.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. sqm 65.0 14.52.2 Old work (one or more coats applied @ 0.83 ltr/10 sqm). sqm 41.0 250 14.53 14.53.1 One or more coats applied on walls @ 0.85 ltr/10 sqm. sqm 58.0 251 14.62 14.62.1 (one or more coats) sqm 9.0 14.62.2 (two or more coats) sqm 11.0 252 15.2 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). cum 578.0 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). cum 356.0 253 15.6 15.6.1 In lime mortar with old mughal bricks. cum 421.0 15.6.2 In lime mortar. cum 202.0 15.6.3 In cement mortar. cum 487.0 254 15.7 15.7.1 From brick work in lime mortar. 1000 nos 1254.0 15.7.2 From brick work in cement mortar. 1000 nos 1560.0 255 15.8 15.8.1 In lime mortar. cum 275.0 15.8.2 In cement mortar. cum 582.0 256 15.13 257 15.14 15.14.1 Of area 3 sq. metres and below. each 85.0 15.14.2 Of area beyond 3 sq. metres. each 117.0 258 15.15 15.15.1 Of area 3 sq. metres and below. each 33.0 15.15.2 Of area beyond 3 sq. metres. each 44.0 259 15.47 260 15.48 261 15.49 262 15.51 15.51.1 Rectangular manhole 90x80 cm and 45 cm deep each 611.0 15.51.2 Rectangular manhole 120x90 cm and 90 cm deep. each 1069.0 15.51.3 Rectangular arch type manhole 140x90cm and 2.45m deep. each 2023.0 15.51.4 Circular manhole 122 cm diameter and 1.68 m deep each 1553.0 263 15.52 15.52.1 Rectangular manhole 90x80 cm and beyond 45 cm depth. each 486.0 15.52.2 Rectangular manhole 120x90 cm and beyond 90 cm depth. each 579.0 15.52.3 Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). each 468.0 15.52.4 Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). each 322.0 264 15.64 265 17.1 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. each 2995.0 266 17.2 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid. each 3036.0 17.2.2 W.C. pan with ISI marked black solid plastic seat and lid. each 3013.0 267 17.3 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. each 4613.0 17.3.2 W.C. pan with ISI marked black solid plastic seat and lid. each 4590.0 268 17.11 17.11.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. each 2187.0 17.11.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar tap. each 1938.0 17.11.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. each 1664.0 17.11.5 White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. each 1775.0 269 17.12 270 17.14 17.14.1 Kitchen sink with drain board 17.14.1.1 510x1040 mm bowl depth 250mm. each 8074.0 17.14.1.2 510x1040 mm bowl depth 225mm. each 7609.0 17.14.1.3 510x1040 mm bowl depth 200mm. each 7493.0 17.14.1.4 510x1040 mm bowl depth 178mm. each 5286.0 17.14.2 Kitchen sink without drain board 17.14.2.1 610x510 mm bowl depth 200 mm. each 4583.0 17.14.2.2 610x460 mm bowl depth 200 mm. each 4351.0 17.14.2.3 470x420 mm bowl depth 178 mm. each 3422.0 271 17.22 17.22.1 White each 945.0 17.22.2 coloured each 1037.0 272 17.24 17.24.1 White each 456.0 17.24.2 Black each 433.0 17.24.3 Coloured (other than black and white) each 688.0 273 17.25 274 17.6 17.60.1 75 mm each 33.0 17.60.2 110 mm each 50.0 275 17.61 276 17.64 17.64.1 Semi rigid pipe 17.64.1.1 32 mm dia each 87.0 17.64.1.2 40 mm dia each 98.0 17.64.2 Flexible pipe (only in residential & complaxes) 17.64.2.1 32 mm dia each 87.0 17.64.2.2 40 mm dia each 98.0 277 17.65 278 17.67 279 17.67 17.68.1 Circular shape 450mm dia. each 806.0 17.68.2 Rectangular shape 453x357mm each 642.0 17.68.3 Oval shape 450x350mm (outer dimensions) each 697.0 17.68.4 Rectangular shape 1500x450 mm each 1311.0 280 17.69 281 17.7 17.70.1 C.P. brass each 340.0 17.70.2 Vitreous china each 324.0 282 17.74 283 17.75 284 17.76 285 18.6 18.6.1 Internal work - Exposed on wall 18.6.1.1 15 mm nominal outer dia .Pipes metre 129.0 18.6.1.2 20 mm nominal outer dia .Pipes metre 153.0 18.6.1.3 25 mm nominal outer dia .Pipes metre 177.0 18.6.1.4 32 mm nominal outer dia .Pipes metre 254.0 18.6.1.5 40 mm nominal outer dia .Pipes metre 354.0 18.6.1.6 50 mm nominal outer dia .Pipes metre 528.0 18.6.2 Concealed work including cutting chases and making good the walls etc. 18.6.2.1 15 mm nominal outer dia .Pipes metre 207.0 18.6.2.2 20 mm nominal outer dia .Pipes metre 234.0 18.6.2.3 25 mm nominal outer dia .Pipes metre 288.0 18.6.2.4 32 mm nominal outer dia .Pipes metre 360.0 286 18.7 External Work 18.7.1 15 mm nominal outer dia .Pipes metre 122.0 18.7.2 20 mm nominal outer dia .Pipes metre 141.0 18.7.3 25 mm nominal outer dia .Pipes metre 185.0 18.7.4 32 mm nominal outer dia .Pipes metre 238.0 18.7.5 40 mm nominal outer dia .Pipes metre 324.0 18.7.6 50 mm nominal outer dia .Pipes metre 498.0 18.7.7 62.50 mm nominal inner dia .Pipes. metre 1429.0 18.7.8 75 mm nominal inner dia .Pipes. metre 2018.0 18.7.9 100mm nominal inner dia .Pipes. metre 2791.0 18.7.10 150 mm nominal inner dia .Pipes. metre 3358.0 287 18.13 18.13.1 25 mm nominal bore each 428.0 18.13.2 32 mm nominal bore. each 500.0 18.13.3 40 mm nominal bore each 584.0 18.13.4 50 mm nominal bore each 749.0 288 18.14 18.14.1 15 mm nominal bore each 316.0 18.14.2 20 mm nominal bore each 431.0 18.14.3 25 mm nominal bore each 499.0 289 18.17 18.17.1 30 cm length 18.17.1.1 15 mm nominal bore each 88.0 18.17.1.2 20 mm nominal bore each 129.0 18.17.2 45 cm length 18.17.2.1 15 mm nominal bore each 149.0 18.17.2.2 20 mm nominal bore each 184.0 290 18.18 18.18.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. each 916.0 18.18.2 With well burnt flyash bricks of 50 kg/sqm compressive strength. each 870.0 291 18.28 292 18.29 18.29.1 15 mm nominal bore each 306.0 18.29.2 20 mm nominal bore each 338.0 293 18.3 18.30.1 15 mm nominal bore each 318.0 18.30.2 20 mm nominal bore each 344.0 294 18.31 295 18.32 296 18.33 297 18.34 298 18.35 299 18.36 300 18.37 301 18.38 302 18.39 303 18.41 304 18.42 305 18.43 18.43.1 100 mm diameter each 806.0 18.43.2 150 mm diameter each 922.0 18.43.3 200 mm diameter each 1336.0 306 18.64 307 18.65 308 18.67 309 18.68 18.68.1 300 mm long each 450.0 18.68.2 600 mm long each 650.0 310 19.4 19.4.1 110 mm diameter OD (min. wall thickness 3.2mm) metre 234.0 19.4.2 160 mm diameter OD (min. wall thickness 4.0 mm) metre 477.0 19.4.3 200 mm diameter OD (min. wall thickness 4.9 mm) metre 751.0 19.4.4 250 mm diameter OD (min. wall thickness 6.2mm) metre 972.0 19.4.5 300 mm diameter OD (min. wall thickness 7.7mm) metre 1232.0 311 19.5 19.5.1 110 mm diameter PVC. pipe metre 576.0 19.5.2 160 mm diameter PVC. pipe metre 704.0 19.5.3 200 mm diameter PVC. pipe metre 821.0 19.5.4 250 mm diameter PVC. pipe metre 949.0 19.5.5 300 mm diameter PVC pipe metre 1078.0 312 19.6 19.6.1 110 mm diameter PVC. pipe metre 274.0 19.6.2 160 mm diameter PVC. pipe metre 444.0 19.6.3 200 mm diameter PVC. pipe metre 521.0 19.6.4 250 mm diameter PVC. Pipe metre 607.0 19.6.5 300 mm diameter PVC pipe metre 700.0 313 19.7 19.7.1 100x100 mm size P type 19.7.1.1 With well burnt bricks each 1764.0 19.7.1.2 With Sewer bricks conforming to IS : 4885 each 1668.0 19.7.2 150 x 100 mm size P type. 19.7.2.1 With well burnt bricks each 1803.0 19.7.2.2 With sewer bricks conforming to IS : 4885 each 1707.0 19.7.3 180x150 mm size P type 19.7.3.1 With well burnt bricks each 1913.0 19.7.3.2 With Sewer bricks conforming to IS : 4885 each 1818.0 314 19.9 19.9.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be notless than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.9.1.1 With well burnt bricks each 7997.0 19.9.1.2 With Sewer bricks conforming to IS : 4885 each 7747.0 19.9.2 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight offrame 58 kg) : 19.9.2.1 With well burnt bricks each 18086.0 19.9.2.2 With Sewer bricks conforming to IS : 4885 each 17402.0 19.9.3 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) 19.9.3.1 With well burnt bricks each 21816.0 19.9.3.2 With Sewer bricks conforming to IS : 4885 each 21228.0 315 19.1 19.10.1 Size 90x80 cm 19.10.1.1 With well burnt bricks metre 6176.0 19.10.1.2 With Sewer bricks conforming to IS : 4885 metre 5448.0 19.10.2 Size 120x90 cm 19.10.2.1 With well burnt bricks metre 7380.0 19.10.2.2 With Sewer bricks conforming to IS : 4885 metre 6512.0 316 19.12 19.12.1 With well burnt bricks metre 5257.0 19.12.2 With Sewer bricks conforming IS : 4885 metre 4648.0 317 21.1 21.1.1 For fixed portion. 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) kg 378.0 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 416.0 21.1.1.3 Polyester powder coated aluminium (minimum thicknessof polyester powder coating 50 micron) kg 426.0 21.1.2 For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings whereverrequired including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). 21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) kg 446.0 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 484.0 21.1.2.3 Polyester powder coated aluminium (minimum thicknessof polyester powder coating 50 micron) kg 494.0 21.1.3 Deduct for not providing EDPM rubber/neoprene gasket all around. kg 80.0 318 21.2 21.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. sqm 802.0 21.2.2 Pre-laminated particle board with decorative lamination on both sides. sqm 907.0 319 21.3 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) sqm 774.0 21.3.2 With float glass panes of 5.0 mm thickness (weight not less than sqm 948.0 12.50 kg/sqm ) 21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). sqm 1182.0 320 21.5 21.5.1 With stainless steel cover plate - minimum 1.25 mm thickness each 1890.0 21.5.2 With brass cover plate - minimum 1.25 mm thickness. each 2072.0 321 21.16 21.16.1 Anodized (AC15 ) aluminium each 62.0 21.16.2 Powder coated minimum thickness 50 micron aluminium each 65.0 21.16.3 Polyester powder coated minimum thickness 50 micron aluminium. each 69.0 322 21.17 323 21.18 324 21.19 325 21.21 326 21.22 327 21.23 328 21.24 329 21.32 330 22.6 a) After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. 331 22.14 22.14.1 Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cum 6569.0 22.14.2 Cement mortar 1:3 (1 cement : 3 sand) cum 9308.0 22.14.3 Cement mortar 1:4 (1cement : 4 sand) cum 8437.0 332 25.1 25.1.1 White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440X575X250mm With integral foot rests. (Premium Range) each 4726.0 25.1.2 White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410X515X255 mm with integral foot rests.(Premium Range) each 4392.0 333 25.2 25.2.1 Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan Size 360X545X395 with solid poly propelyne made soft closing seat cover (Premium Range) each 9788.0 25.2.2 Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360X475X395 mm with solid poly propelyne made soft closing seat cover (Premium Range) each 8742.0 334 25.3 25.3.1 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380X520X375 mm with solid poly propelyne made soft closing seat cover (Premium Range) each 26412.0 25.3.2 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390X570X365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) each 23559.0 25.3.3 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500 x 330mm with solid poly propelyne made, soft closing seat cover (Premium Range) each 21099.0 25.3.4 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500 x 330mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) each 18838.0 335 25.4 25.4.1 Anti germ Fluoro-Polymer Coated couple water closet Size 420X710X810mm with solid poly propelyne made soft closing seat cover. (Premium Range) each 28103.0 25.4.2 Anti germ Fluoro-Polymer Coated couple water closet Size 380X610X805mm with solid poly propelyne made soft closing seat cover. (Premium Range) each 19275.0 25.4.3 Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) each 18952.0 25.4.4 Anti germ Fluoro-Polymer Coated couple water closet Size 375X650X800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) each 18023.0 336 25.5 25.5.1 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370X695X795mm with solid poly propelyne made soft closing seat cover.(Premium Range) Each 34317.0 25.5.2 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370X695X795mm with solid poly propelyne made soft closing seat cover.(Premium Range) each 25954.0 25.5.3 Anti germ Fluoro-Polymer Coated Single PieceW.C. Pan Size 385X720X710mm with solid poly propelyne made soft closing seat cover.(Premium Range) each 22237.0 25.5.4 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370X695X795mm with solid poly propelyne made soft closing seat cover.(Premium Range) each 19450.0 337 25.6 25.6.1 Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 380X650X730mm with solid poly propelyne made soft closing seat cover (Premium Range) each 13365.0 25.6.2 Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 375X360X750mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) each 10670.0 338 25.7 25.7.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595X435X185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) each 16581.0 339 25.8 25.8.1 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x415x200mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system with square wall flance & spout complete (decol technology). (Premium Range) each 14543.0 25.8.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570X820X195mm with 15 mm C. P. Table Top pressmatic Pillar cock auto closing system (decol technology). (Premium Range) each 13614.0 340 25.9 25.9.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) each 15591.0 25.9.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) each 14940.0 341 25.1 25.10.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) each 18585.0 25.10.2 White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) each 16785.0 342 25.11 25.11.1 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) each 14544.0 25.11.2 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal size 475X315X715 mm top inlet with fixing accessories (Inbuilt spreaders, Inbuilt Bottle trape and inbuilt ceramic Waste coupling) with 15mm Brass made Pressmatic auto closing open urinal flush valve with wall flange (Decol technology, 400000 operation warranted) complete including painting of fittings and brakets, cutting and making good the wall and floors wherever required : each 13336.0 25.11.3 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal back inlet with fixing accessories (Inbuilt spreaders, Inbuilt Bottle trape and inbuilt ceramic Waste coupling) Size 385X325X635 mm with Concealed sensotronic flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brakets, cutting and making good the wall and floors wherever required : URS-WHT-13253N & PRS-CHR-073 each 10641.0 343 25.12 25.12.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve battery & electrical oprated type (9V transformer) for urinal complete set with installation box with control cock. (Premium Range) each 23927.0 25.12.2 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) each 20025.0 344 25.13 25.13.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480 X 300X740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) each 18491.0 345 25.14 346 25.14.1 25.14.2 Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor battery & electrical oprated type (9V transformer) for flushing. (Premium Range) each 22998.0 347 25.15 348 25.16 349 25.17 350 25.18 351 25.19 352 25.21 353 25.22 354 25.23 355 25.24 356 25.25 357 25.26 358 25.27 359 25.28 360 25.29 361 25.31 362 25.32 363 25.33 364 25.34 365 25.35 366 25.36 367 25.37 368 25.38 369 25.39 370 25.41 371 25.42 372 25.43 373 25.44 374 25.45 375 25.46 376 25.47 377 25.48 378 25.49 379 25.51 380 25.52 381 25.53 382 25.54 383 25.55 384 25.56 385 25.57 386 25.58 387 25.59 388 25.61 389 25.62 390 25.63 vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) 25.63.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) each 14729.0 25.63.2 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) each 15100.0 25.63.3 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) each 18490.0 391 25.64 25.64.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) each 10617.0 Note- Schedule of items includes all the items required for maintainance of buildings regarding A/R, S/R MOW, Deposit & Other Works as per SCHEDULE OF RATES FOR BUILDING WORKS inforce from 01/01/2024, issued by Project Director, Public Works Department (PIU) M.P. Bhopal. Sub Engineer Sub Divisional OfficerSurvey Sub Division.P.W.D. Bhopal Executive EngineerMaintanance Division No.2P.W.D. Bhopal
Contract Date: Apr 23, 2026 Contract Value : 21.93 Lakh
Government Departments No of Bidders 5
Madhya Pradesh View Result →
37.
Public Administrative Department #11306613 AOC
Tender for Electromagnetic Flow Meter Shall Be A Velocity Sensing Electromagnetic Type, Microprocessor Based Signal Converter, Sealed Housing, Flanged Tube Meter For 1.0 Mpa Working Pressure, Manufactured To Highest Standard Available For Mag-Meters, Equipped With Minimum Six Digit Digital Totalizers, Reading In Units Of (Kilolitres/ Cubicmeter) And Shall Be Accurate Within 0.5% Of Measured Value, Shall Operate Within A Range Of 0.3M/Sec To 4 M/Sec And Be Constructed As Follows:Meter Tube (Sensor) Shall Be Fabricated From Stainless Steel Tube And Use Class Pn10 Flat Face Carbon Steel Flanges In Accordance With Is 1538. These Flanges Shall Be Welded To The Flow Tube. The Internal And External Of The Meter Tube Shall Be Blasted To Near White And Lined With Hard Rubber/ Polyurethrene/ Ptfe Preferably By Sbr Or Epdm. Meter Tube Shall Have A Constant Nominal Inside Diameter Offering No Obstruction To The Flow. The Accuracy Should Be Inclusive Of Linearity, Hysteresis, Repeatability, Temperature And Pressure Effects Coil Housing Shall Be Fabricated From Stainless Steel (Ss 304) With Anticorrosive Paint For Corrosion Resistance And Welded To The Tube Providing A Completely Sealed Environment For All Coils, Electrode Connections And Wiring Harness Capable Of Submerged Or Buried Operation With Ip 68 Protection. Signal Converter Shall Be Pulsed Dc Coil Excitation Type With Auto Zeroing. The Signal Converter Shall Be Remotely Mounted Away From The Meter. The Converter Shall Indicate Direction Of Flow And Provide A Flow Rate Indication And A Total Of Flow Volume For Both Forward And Reverse Directions. The Converter Shall Provide An Isolated 4-20 Ma Output Into Minimum 500-Ohm Load And A Frequency Output Of A Maximum Of 0-10 Khz And A Scaled Pulse Output, Communication Interface Is Rs485, Hart Output, . The Microprocessor Based Signal Converter Shall Have A Selfdiagnostic Test Mode And A Backlit Display That Continuously Displays Rate Of Flow And Total Volume. Converter Shall B
Contract Date: Jun 17, 2026 Contract Value : 8.27 Lakh
Local Bodies No of Bidders 2
38.
Public Administrative Department #11303031 AOC
Bids Are invited for Crate Wire And Ms Pipe Crate Wire - Crate Wire With Mesh Size 4 By 4 Made Of Galvanized Steel For Corrosion Resistance And Durability. Widely Used In Fencing Cages And Reinforcement Applications In Construction Works. , Ms Pipe - Mild Steel Pipe Of 8 Inch Diameter, Designed For Heavy-Duty Applications Such As Industrial Supports Column Structures And Conveyance Systems. , Ms Pipe - Mild Steel Pipe Of 12 Inch Diameter, Designed For Heavy-Duty Applications Such As Industrial Supports, Column Structures, And Conveyance Systems. Provides Superior Strength And Load-Bearing Capability. , Interlocking Tiles - Concrete Interlocking Paver Blocks Of 40 Mm Thickness, Produced With High-Grade Cement And Aggregates Through Vibratory Compaction. Used For Pavements, Parking, Walkways, And Landscaping. Skid-Resistant, Durable, And Weatherproof. , Tar Steel 10Mm - Thermo-Mechanically Treated (Tmt) Bars Of 10 Mm Diameter, Providing Excellent Tensile Strength And Ductility. Suitable For Slabs, Beams, And Light Structural Members In Rcc Construction. , Tar Steel 12Mm - Reinforcement Steel Bars Of 12 Mm Diameter With Ribbed Surface For Strong Bonding With Concrete. Conforms To Is 1786 Standards And Is Widely Used In Beams, Columns, And Load-Bearing Members. , Tar Steel 16Mm - High-Strength Tmt Bars Of 16 Mm Diameter, Commonly Used In Heavy-Duty Structural Members Like Foundations, Bridges, And Industrial Frameworks. Ensures Durability, Seismic Resistance, And Superior Load Handling. , Cement - Ordinary Portland Cement Opc 43 Grade, Conforming To Is 8112 Standards. Provides Consistent Strength, Early Setting, And Superior Bonding Properties. Used In Rcc Works, Plastering, Flooring, Masonry, And General Civil Construction. , Gate Vale 4 X 4 Total Quantity : 48531
Contract Date: Ref. Documents Contract Value : 3.84 Crore
Government Departments No of Bidders 4
40.
Housing Urban and Rular Development #11300693 AOC
Tender for Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : B)All Types Of Ordinary Rock Including All Types Of Laterite Rock, Blasting Prohibited , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means In Foundation Pipeline Trenches Drain (Not Exceeding 1.5 M In Width Or 10 Sq.M. On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 M. A All Kinds Of Soil , Earthwork In Surface Excavation Not Exceeding 30 Cm Depth(But Exceeding 1.5 M Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Beyond Work Site For All Leads Lift Disposed Earth To Be Leveled And Neatly Dressed In: B Hard Soil , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggrt. 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: A) All Works Upto Plinth Level , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : Foundations, Footings, Bases For Columns , Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 (1 Cement : 4 Coarse Sand) In Foundation And Basement. , 18Mm Cement Plaster In Two Coats Under Layer 12Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Coarse Sand) And Top Layer 6Mm Thick With Cement Plaster 1: 3 (1 Cement : 3 Coarse Sand) Finished With Sponge. , Providing & Laying Of Minimun 80Mm Thick Factory Made Shot Blasted Cement Concrete Interlocking Paver Blocks Of Minimum M40 And Above Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Approved Size And Design/ Shape Laid In 50Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand Etc. All Completed As Per The Direction Of Engineer-Incharge. The Product Should Comply With Is 15658: 2006 And Manufactured By Iso 9001: 2008 Certified Plant.1)Size: 210Mm X 150Mm X 80Mm Thick (Type: Rectangular Type Pavers) , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) (Square Hollow Section (Shs) Is4923 /Rectangular Hollow Section (Rhs) Is4923/ Circular Hollow Section (Chs) Is1161 Closed Structural Steel Of (Sail, Tata. Vizag, Jsw ,Apollo Steel Ltd.) Make (Min Yeild Stress 310 Mpa)) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification.A)Size 30 Cm L X 50 Cm H X 15 Cm T , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Providing & Fixing Of Seater Made Of Cast Iron And Powder Coated Complete As Per Direction Of Engineer-In-Charge, ManufacturerS Specification & Drawing. , Providing And Fixing Of A Artificial Cricket Pitch , Monia Tiles , Supplying And Installation, Fixing Nylon Net All Around Verticle Net Garware Make Or Its Equivalent 50Mmx50mmx2.50Mm Thick As Approved By The Engineer-In-Charge.Top Net 50X50mm X1.75Mm Thick.Wirerope Complete Fixing Of Wire Ropes Of 5Mm With Turnbuckleand Dog Clips. Etc. Complete .( Contractor Has To Bear All The Cost And Arrange All Permissions For Interstate Transit Of Goods Including Storage Of The Goods). , Triangle Brush And Handy Turf Brush Set , Sbr Enfield , Supplying And Erecting Integrated Led Round Burial Light 6W Ip65 & Ik10 Class Having Pressure Die-Cast Housing, Having System Lumens Output Of Min. 500 Lumens, Min. Efficacy Of 85 Lumen/W, Cri80, Cct Upto 6500K, Thd10%, P.F. 0.90, Operating Range Of 100-240V, Inbuilt Surge Protection Of 2 Kv, Life Class Of 50,000 Hrs At L50b50 , Slat Spray Tested For 500 Hrs. Including Making Of Recess Of Appropriate Size For Flushing Into Surface With Minimum 2 Year Warranty As Per Specification No Fg-Odf/Pt. , Supplying And Erecting Integrated Led Flood Light Fitting Max. 195W Ip65 & Ik07 Class Having Pressure Die-Cast Aluminium Housing, Having System Lumens Output Of Min. 23400 Lumens, Min. Efficacy Of 120 Lumen/W, Cri70, Cct Upto 6500K, Thd10%, P.F. 0.90, Operating Range Of 140-270V, Inbuilt Surge Protection Of 4 Kv, Life Class Of 50,000 Hrs At L70b50 Including Driver With U Shaped Bracket With Minimum 2 Years Warranty As Per Specification No. Fg Odf/Fl. , Supplying And Erecting Led Square / Circular Max. 14 W Down Lighter / Panel Light Having Pressure Die-Cast Aluminium Housing, Polystyrene Diffuser Having System Lumens Output Of Min. 1500 Lumens, Min. Efficacy Of 110 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Max. Ripple Of 5%, Thd0.95, Operating Range Of 120-270V, Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70b50 Including Driver, Having Mounting Arrangement With Board For Surface Type Or Spring Loaded Mounting Clips Complete With Minimum 2 Years Warranty As Per Specification No. Fg-Idf/Led. , Supply And Erecting Of 9 Inch (225 Mm Sweep) Exhaust Fan With Double Ball Bearings, 1400 Rpm, Complete With All Accessories(A) Cat A. , Supplying And Erecting Concealed Type Foot/Step Light Max. 5W Having Ip67, Ik10 Rated Pressure Die Cast Housing Having System Lumens Output Of Min. 500 Lumens, Min. Efficacy Of 100 Lumen/W, Cri80, Cct Upto 5000K, Beam Angle Of 110 Deg., Thd10%, Sdcm5, P.F. 0.95, Operating Range Of 230-270V, Surge Protection Of 2.5 Kv, Life Class Of 25,000 Hrs At L70b50, Including Driver By Making Necessary Arrangement / Recess In Wall To Make It Flush With Surface With Minimum 2 Year Warranty. , Supplying And Erecting Integrated Led Post Top 45W Ip65 & Ik10 Class Having Die Cast Aluminium Housing With Uv Protected Polycarbonate Diffuser, Having System Lumens Output Of Min.4500 Lumens, Min. Efficacy Of 105 Lumen/W, Cri80, Cct Upto 6500K, Thd10%, P.F. 0.90, Operating Range Of 140-240V, Inbuilt Surge Protection Of 2 Kv, Life Class Of 30,000 Hrs At L50b50 , Including Driver Complete With Minimum 2 Year Warranty As Per Specification No Fg-Odf/Pt. , Supply And Erecting Of 3 Mtr High Decorative Pole With Base Plate And Pole Cap , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 Core 4 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 4 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 50 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required. , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Masonry Open Duct, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm On Surface, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required.. 4 Core 4 Sq.Mm , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 Core 50 Sq.Mm , Supplying And Laying (Including Excavation Of Suitable Width & Depth Up To 90 Cm) 50 Mm Outside Dia. Double Wall Corrugated Pipes (Dwc) Of Hdpe For Enclosing Cable Below Ground/Road Surface, To Required Depth Complete. , Supplying&Erectingwatertightterminalboxof1.6Mm(16Gauge)Crcasheet Of Size 200 X 150 X 150 Mm. Complete On Pole As Per Specification No. Cb-Sb , Supply And Providing Chemical Earthing System (Pipe In Pipe Type) With Outer Pipe Of The Electrode Having Minimum 50Mm Diameter As Per The Enclosed Specifiations And Drawing.The Outer And The Inner Hot Dip Galvanised Ms Pipes Shall Conform To The Specifications And The Space Inbetween Shall Be Filled With Highly Crystalline Conductive And Anti- Corrosive Mixture Conforming To Is-3043. The Earth Electrode Shall Be Cpri Tested. The Scope Of Work Includes Boring( 300Mm Dia Mimnimum)/Exvavation Of Soil/Hard Rock, Refilling With Required Quantity Of Back Fill Compound/Ground Resistance Enhancement Powder Of Requisite Quantity, Compaction, Constuction Of Masonary Chamber Etc Complete As Required To Obtain The Desired Value. Aluminium Tag With Embossed Earthing Value Shall Be Permanently Attached To The Pipe Electrode(B) 2 Metres Length Electrode , Providing And Fixing 25 Mm X 5 Mm Gi Strip On Surface Or In Recess For Coneections Etc. As Required , Supplying And Laying 8 Swg Copper Wire At 0.5 M Below Ground Level For Conductor Earth Electrode Including Soldering Etc. As Required , Supply Of Back Fill Compound/ Groung Resistance Enhancement Powder Conforming To The Enclosed Specifications. , Design Fabrication , Supply , Installation , Testing And Commissioning Of Outdoor Light Panel Made Out Of 14 Swg Crca Sheet , Degreased , Derusted And Painted With Two Coats Of Red Oxide Primer And Two Coats Of Siemens Grey Epoxy Paint And Conforming To Ip 54 Class Of Protection . The Panel Shall Be Suitable For Three Phase 415V , 50 Hz. , Four Wire Ac System And Shall Comprise Of The Following :Auto Manual Swithc 1 Nos Street Light Control 32A 4Pole Contractor 4 Nos. Manual Control Switch With 4 No. / Nc Aux. Contacts One Electronic Timer With 10A Output Contactors For Operating Four Contactors Timer Unit Shall Be In A Separate Compartment With Glass Seal Provision If Any. And Possible To Adjust The Time Settings .3 Phase Meter And Mcb Arrangment With Modem And As Per Ged Requirement . Along With Necessary Stand And Earthting Brought Forward For Necesaary Connection On Both Side Of Panel Incomer63 Amps 4Pole,36 Ka Mccb, With Neutral Contactor, Selector Switch Shall Be Protected By 2 Amps Tp Mcbs. 1 .Sets1breaker On / Off / Trip Indicating Lights With Control McbS.Set1ryb Lamp Mcb Set1busbar 100 Amps ,415 V Tpn 50 Hz Aluminium Bus Bars With Heat Shrinkable Insulation Sleeve.Set 4 Dg Incomer63 Amps 4Pole,36 Ka Mccb, Ats 63 A With 415 V Tpn 50 Hz Aluminium Bus Bars With Heat Shrinkable Insulation Sleeve.Set 4 Outgoing 32 A 4 Pole Mcb ,36Ka Set1 Spare Feeder63 Amps 4 Pole Mcb ,36 Kaset 1 ,25 Amps 4 Pole Mcb , 36 Ka Set1 , , Design Fabrication , Supply , Installation , Testing And Commissioning Of Outdoor Feeder Pillar Panel Made Out Of 14 Swg Crca Sheet , Degreased , Derusted And Painted With Two Coats Of Red Oxide Primer And Two Coats Of Siemens Grey Epoxy Paint And Conforming To Ip 54 Class Of Protection . The Panel Shall Be Suitable For Three Phase 415V , 50 Hz. , Four Wire Ac System And Shall Comprise Of The Following : Incomer63 Amps 4Pole,36 Ka Mccb, With Neutral Contactor,On / Off / Trip Indicating Lights With Control McbS.Set1ryb Lamp Mcb Set1busbar 100 Amps ,415 V Tpn 50 Hz Aluminium Bus Bars With Heat Shrinkable Insulation Sleeve.Set 20 Outgoing 32 A Four Pole Mcb ,36Ka Set 35 63 Amps 4 Pole Mcb ,36 Kaset 10 ,25 Amps 4 Pole Mcb , 36 Ka Set 10 , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required.(A) Sp, Cat A , Supplying, Erecting, Testing And Commissioning Of Diesel Generating Set With Alternator Of 58.5 Kva Output Continuous Rating, 3 Phase, 415 V, 50 Hz, 0.8 P.F., A.C. Supply, A Totally Enclosed Air Cooled / Liquid Cooled Multi-Cylinder Diesel Engine Developing Suitable Bhp At 1500 Rpm With 10% Overload For 1 Hour In 12 Hours, Along With Standard Accessories, Self-Excited, Self-Regulated, Screen Protected Alternator With Static Excitation System Running At 1500 Rpm As Per Is 4722-2001 With Voltage Regulation +/- 5 %, With Performance Class G2/G3 And Maximum Fuel Consumption 9.98 Ltr/Hr @75% Loading. Both The Engine And Alternator Direct Coupled On A Common Fabricated Steel Base Frame And Mounted On Anti-Vibrating Pads, With Standard Control Panel Comprising Meters, Switchgears, Indicators Connected With Suitable Wires/Cables, The Complete Set Enclosed In Composite Acoustic Enclosure As Fully Assembled Integral Unit Made Of 16 Swg Crca Sheet, Sound Absorbing Material To Restrict Sound Level Up To 75 Db At 1.0 M, Provided With First Filling Of Oil, Diesel Not Less Than 150 Ltr Etc., On Provided M20 Grade cement concrete Foundation As Per Specification No. Gen-Dg
Contract Date: Jun 17, 2026 Contract Value : 1.20 Crore
Statutory Bodies & Commissions/Committees No of Bidders 2
41.
Public Administrative Department #11300148 AOC
Tender For Construction Of Inspection Banglow, Guest House, Boundary Wall & Garage Near Suklai Head Works Under Extension, Renovation And Modernization Of (Erm), Sukla Irrigation Project Under Pmksy-Aibp For The Year 2021-22. , Construction Of Inspection Banglow, Guest House (Ground Floor). Earth Work : Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil. , Excavating, Supplying And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete. , Steel Work : Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , Cement Concrete Work : Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size De Rived From Natural Sources) , Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Providing And Laying Damp-Proof Course 40Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 12.5Mm Nominal Size Derived From Natural Sources) , Shuttering & Formwork : Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Columns, Pillars, Piers, Abutments, Posts And Struts , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Stairs, (Excluding Landings) Except Spiral-Staircases , Pre Construction Anti - Termite Treatment : Diluting And Injecting Chemical Emulsion For Post-Constructional Anti-Termite Treatment (Excluding The Cost Of Chemical Emulsion) : Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 20% With 1% Concentration , Brick Work : Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Brick Work With Common Burnt Clay Modular Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Wood Work : Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately). Sal Wood , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note:- Butt Hinges And Necessary Screws Shall Be Paid Separately) Second Class Teak Wood 35 Mm Thick Shutters , Pvc Door Frame : Providing And Fixing Factory Made Pvc Door Frame Made Of Pvc Extruded Sections Of Size 75 Mm X 53 Mm, Having Wall Thickness 2.0 Mm (± 0.2 Mm). Both Verticalssides Of The Frame Reinforced With Pvc Profile Of Cross Section Size 28 Mm X 30 Mm X 2 Mm Thickness (± 0.2 Mm) And 75 Mm X 200 Mm Long, Including Reinforcing Both Ends Of The Top Frame With Pvc Profile. Pvc Door Frame And Pvc Reinforcement Profile To Be Mitred Cut, Jointed And Fusion Welded Together, Including Providing And Fixing 3 Nos Of 125 Mm Long Stainless Steel Hinges To Frame, Fixing The Frame With Jamb With Required Nos & Sizes Of Anchor Dash Fastener, All Complete As Per Manufacturers Specification And Direction Of Engineerin-Charge. , Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Section Of Size 100 Mm X 37 Mm With Wall Thickness 2 Mm (± 0.2 Mm), With Inbuilt Bead On One Side, Styles And Rails Mitered Cut And Joint At The Corners By Means Of 2 Nos Of Plastic Brackets Of Size 75 Mm X 220 Mm At Each Corner And Stainless Steel Screws, Reinforcing The Hinge Side Of Tyle By Inserting Pvc Profile Of Size 28 Mm X 30 Mm, With Wall Thickness 2 Mm ( ± 0.2 Mm). Lockrail Of Size 100 Mm X 37 Mm, Wall Thickness 2 Mm (+ 0.2 Mm) Will Be Fixed To The Vertical Styles. Providing With Pvc Snapfit Beads And Panel Of Size 100 Mm X 20 Mm, And Inserting 2 Nos Tie Bar Of 6 Mm Dia And Fastening With Nuts And Washers Complete, All As Per Manufacturers Specification And Direction Of Engineer-In-Charge. , Providing And Fixing In Position Collapsible Steel Shutters With Vertical Channels 20X10x2 Mm And Braced With Flat Iron Diagonals 20X5 Mm Size, With Top And Bottom Rail Of T-Iron 40X40x6 Mm, With 40 Mm Dia Steel Pulleys, Complete With Bolts, Nuts, Locking Arrangement, Stoppers, Handles, Including Applying A Priming Coat Of Approved Steel Primer. , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : For Fixed Portion Less Than 12.50 Kg/Sqm) Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) , For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately) Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Tiles Works : Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding. , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , Plastering Works : 12 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Plinth Protection : Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) Over 75Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation Leveling And Dressing And Finishing The Top Smooth. , Painting : With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture , With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : Water Thinnable Cement Primer , Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives. New Work (Two Or More Coats Applied @ 1.43 Litre/ 10 Sqm. Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm. , Door Window Fittings : Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 300Mm X 16Mm , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 300Mm X 10Mm , Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 125Mm , Providing And Fixing Ptmt Butt Hinges With Necessary Screws Etc. Complete. 75X60x10 Mm Fitted With 5.5 Mm Dia M.S. Bright Bar Rod Weighing Not Less Than 34 Gms , Construction Of Inspection Banglow Cum Guest House (First Floor). Steel Work : Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , Cement Concrete Work : Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Shuttering & Formwork : Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Columns, Pillars, Piers, Abutments, Posts And Struts , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Stairs, (Excluding Landings) Except Spiral-Staircases , Brick Work : Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Wood Work : Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately). Sal Wood , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note:- Butt Hinges And Necessary Screws Shall Be Paid Separately) Second Class Teak Wood 35 Mm Thick Shutters , Pvc Door Frame : Providing And Fixing Factory Made Pvc Door Frame Made Of Pvc Extruded Sections Of Size 75 Mm X 53 Mm, Having Wall Thickness 2.0 Mm (± 0.2 Mm). Both Verticalssides Of The Frame Reinforced With Pvc Profile Of Cross Section Size 28 Mm X 30 Mm X 2 Mm Thickness (± 0.2 Mm) And 75 Mm X 200 Mm Long, Including Reinforcing Both Ends Of The Top Frame With Pvc Profile. Pvc Door Frame And Pvc Reinforcement Profile To Be Mitred Cut, Jointed And Fusion Welded Together, Including Providing And Fixing 3 Nos Of 125 Mm Long Stainless Steel Hinges To Frame, Fixing The Frame With Jamb With Required Nos & Sizes Of Anchor Dash Fastener, All Complete As Per Manufacturers Specification And Direction Of Engineerin-Charge. , Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Section Of Size 100 Mm X 37 Mm With Wall Thickness 2 Mm (± 0.2 Mm), With Inbuilt Bead On One Side, Styles And Rails Mitered Cut And Joint At The Corners By Means Of 2 Nos Of Plastic Brackets Of Size 75 Mm X 220 Mm At Each Corner And Stainless Steel Screws, Reinforcing The Hinge Side Of Tyle By Inserting Pvc Profile Of Size 28 Mm X 30 Mm, With Wall Thickness 2 Mm ( ± 0.2 Mm). Lockrail Of Size 100 Mm X 37 Mm, Wall Thickness 2 Mm (+ 0.2 Mm) Will Be Fixed To The Vertical Styles. Providing With Pvc Snapfit Beads And Panel Of Size 100 Mm X 20 Mm, And Inserting 2 Nos Tie Bar Of 6 Mm Dia And Fastening With Nuts And Washers Complete, All As Per Manufacturers Specification And Direction Of Engineer-In-Charge. , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : For Fixed Portion Less Than 12.50 Kg/Sqm) Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) , For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately) Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Tiles Works : Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding. , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , Plastering Works : 12 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Painting : With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture , With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : Water Thinnable Cement Primer , Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives. New Work (Two Or More Coats Applied @ 1.43 Litre/ 10 Sqm. Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm. , Door Window Fittings : Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 300Mm X 16Mm , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 300Mm X 10Mm , Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 125Mm , Providing And Fixing Ptmt Butt Hinges With Necessary Screws Etc. Complete. 75X60x10 Mm Fitted With 5.5 Mm Dia M.S. Bright Bar Rod Weighing Not Less Than 34 Gms , Construction Of Inspection Banglow, Guest House (Second Floor). Steel Work : Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , Cement Concrete Work : Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Shuttering & Formwork : Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Columns, Pillars, Piers, Abutments, Posts And Struts , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Stairs, (Excluding Landings) Except Spiral-Staircases , Brick Work : Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Wood Work : Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately). Sal Wood , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note:- Butt Hinges And Necessary Screws Shall Be Paid Separately) Second Class Teak Wood 35 Mm Thick Shutters , Pvc Door Frame : Providing And Fixing Factory Made Pvc Door Frame Made Of Pvc Extruded Sections Of Size 75 Mm X 53 Mm, Having Wall Thickness 2.0 Mm (± 0.2 Mm). Both Verticalssides Of The Frame Reinforced With Pvc Profile Of Cross Section Size 28 Mm X 30 Mm X 2 Mm Thickness (± 0.2 Mm) And 75 Mm X 200 Mm Long, Including Reinforcing Both Ends Of The Top Frame With Pvc Profile. Pvc Door Frame And Pvc Reinforcement Profile To Be Mitred Cut, Jointed And Fusion Welded Together, Including Providing And Fixing 3 Nos Of 125 Mm Long Stainless Steel Hinges To Frame, Fixing The Frame With Jamb With Required Nos & Sizes Of Anchor Dash Fastener, All Complete As Per Manufacturers Specification And Direction Of Engineerin-Charge. , Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Section Of Size 100 Mm X 37 Mm With Wall Thickness 2 Mm (± 0.2 Mm), With Inbuilt Bead On One Side, Styles And Rails Mitered Cut And Joint At The Corners By Means Of 2 Nos Of Plastic Brackets Of Size 75 Mm X 220 Mm At Each Corner And Stainless Steel Screws, Reinforcing The Hinge Side Of Tyle By Inserting Pvc Profile Of Size 28 Mm X 30 Mm, With Wall Thickness 2 Mm ( ± 0.2 Mm). Lockrail Of Size 100 Mm X 37 Mm, Wall Thickness 2 Mm (+ 0.2 Mm) Will Be Fixed To The Vertical Styles. Providing With Pvc Snapfit Beads And Panel Of Size 100 Mm X 20 Mm, And Inserting 2 Nos Tie Bar Of 6 Mm Dia And Fastening With Nuts And Washers Complete, All As Per Manufacturers Specification And Direction Of Engineer-In-Charge. , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : For Fixed Portion Less Than 12.50 Kg/Sqm) Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) , For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately) Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Tiles Works : Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding. , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , Plastering Works : 12 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes , Roofing : Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.50 Mm (+ 0.05 %) Total Coated Thickness With Zinc Coating 120 B49grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester To Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Using Self Drilling/ Self Tapping Screws Complete : Ridges Plain (500 - 600Mm) , Sound Proof : Providing And Fixing Thermal Insulation With Resin Bonded Fibre Glass Wool Conforming To Is: 8183 Having Density 24 Kg/M3, 50 Mm Thick, Wrapped In 200G Virgin Polythene Bags Fixed To Wall With Screw, Rawel Plug & Washers And Held In Position By Criss Crossing Gi Wire Etc. Complete As Per Directions Of Engineer-In-Charge. , 8 Mm Thick Fully Perforated Calcium Silicate Board Made With Calcareous & Siliceous Materials Reinforced With Cellulose Fiber Manufactured Through Autoclaving Processto Give Stable Crystalline Structure With Minimumcompressive Strength 225 Kg/ Sq. Cm, Bending Strength100 Kg/Sq. Cm , Of Size 595X595 Mm, Having Perforationof Dia. 10 Mm With Minimum Perforated Area 18 % Withnon Woven Tissue On The Back Side, Having An Nrc( Noise Reduction Coefficient) Of 0.85, With 50 Mm Thickrockwool Of 48 Kg /Cum Backing , Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms/Sqm (Both Side Inclusive) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50Mm Long With 6Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25 Mm At 230 Mm C/C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes , Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With : Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25 Mm At 230 Mm C/C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes , Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With : Fully Perforated Gypsum Plaster Board Of Size 1200 X 2400X12.5 Mm Having Approx. 15 % Perforated Area With Perforation Size And Pattern As Approved By The Engineerin-Charge And As Per Manufacturers Specification, With All 4 Side Tapered And Backed By Acoustical Tissue With Nrc Value Not Less Than 0.60 , Painting : With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture , With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : Water Thinnable Cement Primer , Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives. New Work (Two Or More Coats Applied @ 1.43 Litre/ 10 Sqm. Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm. , Door Window Fittings : Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 300Mm X 16Mm , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 300Mm X 10Mm , Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 125Mm , Providing And Fixing Ptmt Butt Hinges With Necessary Screws Etc. Complete. 75X60x10 Mm Fitted With 5.5 Mm Dia M.S. Bright Bar Rod Weighing Not Less Than 34 Gms , Construction Of Inspection Banglow, Guest House (Inetrnal Electrification) Sub Head -I (Wiring) Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. A) Group A , Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2 Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. , Wiring For Light/ Power Plug With 2X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit Along With 1 No 4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire , 2 X 6 Sq. Mm + 1 X 6 Sq. Mm Earth Wire , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. 3 X 1.5 Sq. Mm , 6 X 1.5 Sq. Mm , 6 X 4 Sq. Mm , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. 20 Mm , 25 Mm , Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 3 Pin 5/6 Amps Modular Socket Outlet And 5/6 Amps Modular Switch, Connection Etc. As Required. (For Light Plugs To Be Used In Non Residential Buildings). , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 3Pin 5/6 Socket Outlet , Sub Head - Ii (Mcb & Dbs ) Supplying And Fixin G Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)8 Way, Double Door , Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 215 Volts, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) 4 Way (4 + 12), Double Door , Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Bre Aker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole , Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps , Supplying And Fixing Following Rating, 415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40/63 A Tp , Sub Head-Iii (Fan,Fittings And Fixtures) Supplying, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee Five Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc Motor) Not Less Than 32 W, Class Of Insulation B, 3 Nos Blade, 30 Cm Long Down Road, 2 Nos Of Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cmm/W) Minimum 6.85 Air Delivery Minimum 215Cmm , 350 Rpm (Tolerance As Per Is:374-2019), Thd Less Than 10% Remote Or Electronic Regulator For Speed Control And All Remaining Accessories I/C Safety Pin, Nut Bolts , Washer, Temperature Rise=75 Degree C(Max. ), Insulation Resistance More Than 2Mega Ohm, Suitable For 230V, 50 Hz Ac Supply, Earthing Etc. Complete As Required. , Supplying, Installation Of Exhaust Fan Sweep Not Less Than 300 Mm In The Existing Opening, And Made Of Aluminium Die-Cast Motor Body, Front Protection Guard, Low Noise Operation, Robust Metal Body,Double Ball Bearing,Anti Dust,High Speed(Minimum 1350 Rpm) & High Air Delivery(Minimum 1000 Cmh) Including Making Good The Damage, Connection, Testing, Commissioning Etc. As Required. , Supplying,Installation, Testing And Commissioning Of Surface Mounted Square/Round Shape Led Downlighter Having Suitable Housing Lumen Efficacy = 100Lm/Watt, System Lumen Output = 1200 Lm, Cri = 80, Power Factor = 0.9 Having Suitable Diffuser And Cct In Between 4000K To 6500 K (I/C Both Limits) Complete With All Accessories Etc. Directly On Ceiling/Wall Including Connection With 1.5 Sq. Mm Frls Pvc Insulated, Copper Conductor, Single Core Cable And Earthing Etc. As Required. , Sub Head-Iv (Service Connection) Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc/ Hume/ Metal Pipe As Required. Upto 35 Sq. Mm , Above 35 Sq. Mm And Upto 95 Sq. Mm , Supplying Of One Number Xlpe Insulated And Pvc Sheathed Aluminium Conductor Armoured Power Cable Of 1.1 Kv Grade With Isi Marked (Is 7098 (Part - I) / 1988 With Amendment Up To Date) Following Sizes. A) 3 ½ X 35 Sq.Mm , B) 3 ½ X 95 Sq.Mm , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. A) 3.5 X 35 Sqmm ( 32 Mm ) , B) 3½ X 95 Sq. Mm (45Mm) , Supplying And Fixing Of Light Class G.I. Pipe Of 80 Mm Dia. (Nominal) 3 Metres Length Along The Pole For Protection Of Under Ground Cable As Required. , Sub-Head -V( Lighting Conductor And Earthing ) Providing And Fixing Of Lightning Conductor Finial, Made Of 25 Mm Dia 300 Mm Long, G.I. Tube, Having Single Prong At Top, With 85 Mm Dia 6 Mm Thick G.I. Base Plate Including Holes Etc. Complete As Required. , Providing And Fixing G.I. Tape 20 Mm X 3 Mm Thick On Parapet Or Surface Of Wall For Lightning Conductor Complete As Required. (For Horizontal Run) , Providing And Fixing G.I. Tape 20 Mm X 3 Mm Thick On Parapet Or Surface Of Wall For Lightning Conductor Complete As Required. (For Vertical Run) , Providing And Fixing Testing Joint, Made Of 20 Mm X 3 Mm Thick G.I. Strip, 125 Mm Long, With 4 Nos. Of G.I. Bolts, Nuts, Chuck Nuts And Spring Washers Etc. Complete As Required , Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required. , Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing As Required , Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing Along With Existing Surface/ Recessed Conduit/ Submain Wiring/ Cable As Required. , Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required , Providing And Laying G.I. Tape 32 Mm X 6 Mm From Earth Electrode Directly In Ground As Required. , Sub Head-Vii (Air Condition) Supplying, Installation, Testing And Commissioning Of Suitable Tr Capacity 5 Star Rating With Eer Not Less Than 4.3 , Split Type Inverter Air Conditioning Units Suitable For Indoor Unit To Be Fixed On The Wall Having Minimum Cooling Capacity 5400 Kcal/Hr Suitable For Single Phase Ac Supply Complete With Outdoor Unit Having Copper Condenser Coil,Suitable Clamp/Bracket For Fixing Outdoor Unit, Inter Connection With Suitable Copper Pipe Etc. Complete As Required. , Supplying , Installation, Testing And Commissioning Of Automatic Voltage Stabilizer Of Capacity 5 Kva For Air Conditioner With 130-240 Volts Range For Operation Of Air Conditioner Complete With Testing Trail Run Etc Complete As Reqd. , Supplying , Installation, Testing And Commissioning Of Automatic Voltage Stabilizer Of Capacity 5 Kva For Air Conditioner With 130-240 Volts Range For Operation Of Air Conditioner Complete With Testing Trail Run Etc Complete As Reqd. , Supply, Installation Testing & Commissioning Of Rigid Upvc Piping Complete With Fittings, Supports As Per Specifications And Duly Insulated With 6 Mm Thick Closed Cell Nitrile Rubber Insulation. A) 25 Mm Dia ( With 6 Mm Nitrile Rubber Insulation) , Construction Of Inspection Banglow, Guest House (For Sanitary & Water Supply) Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required : W.C. Pan With Isi Marked Black Solid Plastic Seat And Lid , Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require: White Vitreous China Surgeon Type Wash Basin Of Size 660X460 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps With Elbow Including Operated Levers , Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per Is:13983 With C.I. Brackets And Stainless Steel Plug 40 Mm, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required : Kitchen Sink With Drain Board 510X1040 Mm Bowl Depth 250 Mm , Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. Semi Rigid Pipe 40 Mm Dia , Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. , Providing And Fixing Toilet Paper Holder : Vitreous China , Providing And Fixing Soil, Waste And Vent Pipes : 100 Mm Dia Sand Cast Iron S&S Pipe As Per Is: 1729 , Providing And Fixing Trap Of Self Cleansing Design With Screwed Down Or Hinged Grating With Or Without Vent Arm Complete, Including Cost Of Cutting And Making Good The Walls And Floors : 100 Mm Inlet And 100 Mm Outlet Sand Cast Iron S&S As Per Is: 3989 , Cutting Chases In Brick Masonry Walls For Following Diameter Sand Cast Iron/Centrifugally Cast (Spun) Iron Pipes And Making Good The Same With Cement Concrete 1:3:6 ( 1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 12.5 Mm Nominal Size), Including Necessary Plaster And Pointing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) : 100 Mm Dia , Providing And Fixing Ptmt Liquid Soap Container 109 Mm Wide, 125 Mm High And 112 Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour, Weighing Not Less Than 105 Gms. , Providing And Fixing Ptmt Towel Ring Trapezoidal Shape 215 Mm Long, 200 Mm Wide With Minimum Distances Of 37 Mm From Wall Face With Concealed Fittings Arrangement Of Approved Quality And Colour, Weighing Not Less Than 88 Gms. , Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fittings Arrangement Of Approved Quality And Colour 600 Mm Long Towel Rail With Total Length Of 645 Mm, Width 78 Mm And Effective Height Of 88 Mm, Weighing Not Less Than 190 Gms , Providing And Fixing Brass Bib Cock Of Approved Quality : 20 Mm Nominal Bor , Providing And Fixing Brass Stop Cock Of Approved Quality : 20 Mm Nominal Bor , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 15 Mm Dia Nominal Outer Dia Pipes , 20 Mm Dia Nominal Outer Dia Pipes , 25 Mm Dia Nominal Outer Dia Pipes , 32 Mm Dia Nominal Outer Dia Pipes , 40 Mm Dia Nominal Outer Dia Pipes , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc Internal Work - Exposed On Wall 15 Mm Dia Nominal Bore , Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc. Internal Work - Exposed On Wall 20 Mm Dia Nominal Bore , 32 Mm Dia Nominal Bore Metre , 40 Mm Dia Nominal Bore , Providing And Fixing Gun Metal Non- Return Valve Of Approved Quality (Screwed End) : 20 To 40 Mm Nominal Bore , Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality (Screwed End) 20 Mm Nominal Bore , 32 Mm Nominal Bore , 40 Mm Nominal Bore , Providing And Fixing Gun Metal Non- Return Valve Of Approved Quality (Screwed End) : 15 Mm Nominal Bore , 20 Mm Nominal Bore , 25 Mm Nominal Bore , Providing And Fixing Gun Metal Non- Return Valve Of Approved Quality (Screwed End) : 40 Mm Nominal Bore Horizontal , Vertical , Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions : 30 Cm Length 15 Mm Nominal Bore , 20 Mm Nominal Bore , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank, Is : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank , Tube Well Boring With 100 Mm Diameter Casing Pipe For Hand Pump / Tubewell, In All Soils Except Ordinary Hard Rocks Requiring Blasting, Including Removing The Casing Pipe After The Hand Pump / Tube Well Is Lowered And Tested : Up To 6 Metres Depth , Beyond 6 M And Up To 12 M Depth , Beyond 12 M And Up To Required Depth , Providing And Placing In Position Filters Of 40 Mm Diameter G.I. Pipe With Brass Strainer Of Approved Quality. , Providing And Placing In Position Hand Pump Of Approved Quality For 40 Mm Diameter G.I. Pipe Complete With All Accessories. , Providing And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete (New Work) : 50 Mm Nominal Bore , Providing And Fixing Square-Mouth S.W. Gully Trap Class Sp-1 Complete With C.I. Grating Brick Masonry Chamber With Water Tight C.I. Cover With Frame Of 300 X300 Mm Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design: 150 X 100 Mm Size P Type With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Constructing Brick Masonry Manhole In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand ) With Reinforced Cement Concrete Top Slab With 1:1.5:3 Mix (1 Cement : 1.5 Coarse Sand (Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size), Foundation Concrete 1:4:8 Mix (1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stone Aggregate 40 Mm Nominal Size), Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Finished With Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : Inside Size 90X80 Cm And 45 Cm Deep Including C.I. Cover With Frame (Light Duty) 455X610 Mm Internal Dimensions, Total Weight Of Cover And Frame To Be Not Less Than 38 Kg (Weight Of Cover 23 Kg And Weight Of Frame 15 Kg) : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Reducing Socket, Bend, Tee, Etc. , Construction Of Septic Tank. (50 Users) Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. , Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete : , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Vertical And Horizontal Fins Individually Or Forming Box Louvers Band, Facias And Eaves Boards , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : , Cement Plaster Skirting Up To 30 Cm Height, With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Finished With A Floating Coat Of Neat Cement. , Retaining Wall Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. , Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete : , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For , Walls (Any Thickness) Including Attached Pilasters, Butteresses, Plinth And String Courses Etc , Lintels, Beams, Plinth Beams, Girders, Bressumers And , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , Dismentling Existing A-Type Building Demolishing Reinforced Cement Concrete Work Manually/ By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer - In- Charge. , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area Beyond 3 Sq. Metres , Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles Above 25 Mm And Up To 40 Mm , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar , Dismantling Wood Work In Frames, Trusses, Purlins And Rafters Up To 10 Metres Span And 5 Metres Height Including Stacking The Material Within 50 Metres Lead : Of Sectional Area 40 Square Centimetres And Above , Dismantling Roofing Including Ridges, Hips, Valleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of G.S. Sheet , Dismantling Aluminium/ Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Material And Stacking Of Serviceable Material With In 50 Meters Lead As Directed By Engineer-In-Charge. , Boundary Wall With Fencing). Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. , Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete : , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : , Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For , Lintels, Beams, Plinth Beams, Girders, Bressumers And , Columns, Pillars, Piers, Abutments, Posts And Struts , Brick Work With Common Burnt Clay Modular Bricks Of Class Designation 7.5 In Foundation And Plinth In : , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : , 20 Mm Cement Plaster Of Mix : , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : Water Thinnable Cement Primer , Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives. , Fencing With Reinforced Cement Concrete Post Placed At Required Distance, Embedded In Cement Concrete Blocks, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post One Side Only, Provided With Horizontal Lines And Two Diagonals Of Barbed Wire Weighing 9.38 Kg Per 100 Metres (Minimum), Between The Two Posts Fitted And Fixed With G.I. Staples On Wooden Plugs Or G.I. Binding Wire Tied To 6 Mm Bar Nibs Fixed While Casting The Post (Cost Of Reinforced Cement Concrete Posts, Struts, Earth Work And Concrete To Be Paid For Separately) :- Payment To Be Made Per Metre Cost Of Total Length Of Barbed Wire Used. , Land Development Excavating, Supplying And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete. , O.H. Tank Not Found!!! , Solar Street Light Godox S60 Led Focusing Light, Outdoor & Indoor , Gate Pillarlight For Home Outdoor Garden Post Decorative Lamp , Dg Set , Audio Visual Systems Projector (Sony) , Motorised Screen And Accessories (6Ft / 8 Ft) , Digital Podium All-In-One System , Chairman Unit , Delegate Unit , Amplifier 80 Watt , Microphones , Ceiling Mount Speaker ( 6 Watt) , Wire & Lane Cabling For Speaker , Projector & Amplifier Hdmi Wire Connector Wiring Set , Installation, Testing And Commissioning Charges And Configuration Of The System , M.I. 64 -T.V. 4 Nos. @ Rs. 75000/- Per Nos. , Cctv With Motion Sensor And Sound Recorder Including Supplying & Fitting Fixing (Philips Hsp 3800) , Furniture & Fixture Sofa Set A/ Waiting Hall , B/ Executive Guest Room , C/ Suite Room , Executive Table A/ Executive Guest Room , B/ Suite Room , Executive Chair , Bed A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Matress A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Chair A/ Guest Room , B/ Staff Room , C/ Suite Room I)Type-I , Ii)Type-Ii , D/ Security Room , Bed Sheet A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Pillow A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Blanket A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Mosquito Net A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Bath Towel , Hand Towel , Kitchen Utensil A/ Gas Stove , B/ Pressure Cooker , B/ Cookware Set , C/ Dinner Set , D/ Cup Plate Set , E/ Cutlery Set , F/ Mixture Grinder , G/ Electric Kattle , H/ Microwave Oven , I/ Container , Conference Table , Conference Chair (Elentra-112 Steel Frame Fixed Chair)
Contract Date: Jun 16, 2026 Contract Value : 4.10 Crore
Government Departments No of Bidders 2
42.
Housing Urban and Rular Development #11299927 AOC
Tender For Dismantling Roofing Including Ridges, Hips, Valleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of: , Dismantling Wood Work In Frames, Trusses, Purlins And Rafters Up To 10 Metres Span And 5 Metres Height Including Stacking The Material Within 50 Metres Lead :Of Sectional Area 40 Square Centimetres And Above , Providing And Laying In Position Cement Concrete 1:4:8 (1 Cement : 4 C/Sand : 8 St. Agg. 40 Mm Size) Excluding The Cost Of C/Shuttering - All Work Upto Plinth Level. , Brick Work With F.P.S. Bricks Of Class Designation 75 In Super Structure Above Plinth Level Upto Floor V Level In Cement Mortar 1:6 (1 Cement : 6 C/Sand). , Reinforced Cement Concrete Work In Beam,Suspended Floor Roof Having Slop Up To 15 Degree Landing Balcony Shelf Chajjas Lintels Band Plain Windoe Cills Staircase & Sprial Stair Case Etc. Up To Floor Five Level,Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement :1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate20 Mm Nominal Size) , Centering And Shuttering I/C Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers. , Reinforcement For Reinforced Cement Concrete Work I/C Straightening, Cutting, Bending, Placing In Position And Binding All Complete --Thermo - Machanically -Treated Bars. , Half Brick Masonry With F.P.S. Bricks Of Class Designation 75 In Superstructure Abov Plinth Level Upto Floor V Level In Cement Morar 1:4 (1 Cement :4 Sand) , 12 Mm Cement Plaster Of Mix. 1:6 Cement And Fine Sand Mortar. , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix :1:6 (1 Cement: 6 Fine Sand) , Providing And Laying Vitrified Tiles In Floor With Different Sizes (Thickness To Be Specified By The Manufacturer), With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 154 77, In Average 6 Mm Thickness, Including Grouting Of Joints (Payment For Grouting Of Joints To Be Made Separately).Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1 :3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm , Providing And Laying In Position Cement Concrete Of Specified Grade 1:2:4 (1Cement :2 Sand : Stone Aggregate 40Mm Nominal Size) Excluding The Cost Of Centring And Shuttering - -All Work Upto Plinth Level , Providing And Applying White Cement Based Putty Of Average Thickness 1Mm Of Approved Brand And Manufacture, Over Plastered Wall Surface To Prepare The Surface Even And Smooth Complete , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade :New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) , Distempering With 1St Quality Acrylic Distemper (Ready Mixed) Having Voc Content Less Than 50 Gram/Litre, Of Approved Manufacturer And Of Required Shade And Colour All Complete To Achieve Even Shade And Colour : , Painting Steel Work With Deluxe Multi Surface Paint Of Req. Shade (Two Or More Coats) Applied Over An Under Coat Of Primer Approved Brand. , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade :One Or More Coats On Old Work , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, Including Cutting And Making Good The Walls Etc. Iinternal Work - Exposed On Wall 15 Mm Dia. Nominal Bore , Providing And Fixing Brass Bib Cock Of Approved Quality 15 Mm Nominal Bore , Providing And Fixing Brass Stop Cock Of Approved Quality 15 Mm Nominal Bore , Providing And Fixing Ball Valve (Brass) 15 Mm Nominal Bore High & Low Pressure With Plastic Floatsof Approved Quality Complete , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Isi : 12701 Tank Isi : 12701 Marked With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank , Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality (Screwed End) 25 Mmnominal Bore , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is: 5382, Leaving 10 Mm Gap For Thermal Expansion, () Single Socketed Pipes. , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is: 5382, Leaving 10 Mm Gap For Thermal Expansion, () Single Socketed Pipes75 Mm Diameter , Providing And Fixing Pvc Door Frame Of Size 50X4 7 Mm With A Wall Thickness Of 5 Mm (± 0.2 Mm), Made Out Of Single Piece Extruded Pvc Profile, With Mitred Cut Joints And Joint With 2 Nos Of Pvc Bracket Of Size 190 Mm X 100 Mm Long Arms Of Cross Section Size 35 X 15 Mm & Self Driven Self Taping Screws, The Vertical Door Profiles To Be Reinforced With 40X20 Mm M.S. Rectangular Tube Of 0.8 Mm , Including Providing Epdm Rubber Gasket Weather Seal Throughout The Frame, Including Jointing 5 Mm Pvc Frame Strip With Pvc Solvent Cement On The Back Of The Profile. The Door Frame To Be Fixed To The Wall Using 8 X100 Mm Long Anchor Fasteners Complete, All As Per Manufacturers Specification And Direction Of Engineer -In- Charge. , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter, Made Out Of Single Piece Extruded Soild Pvc Profiles, 5 Mm (± 0.2 Mm) Thick, Having Styles & Rails (Except Lock Rail) Of Size 95 Mmx 35 Mm X 5 Mm, Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered ( On Both Side), Having One Side Thickness Of 15 Mm Integrally Extruded On The Hinge Side Of The Profile For Better Screw Holding Power, Including Reinforcing With Ms Tube Of Size 40 Mm X 20 Mm X 1 Mm, Joints Of Styles & Rails To Be Mitered Cut & Joint With The Help Of Pvc Solvent Cement, Self Driven Self Tapping Screws & M.S. Rectangular Pipes Bracket Of Size 190 Mm X 100 Mm Of Cross Section Size 35 Mm X 17 Mm X 1 Mm At Each Corner. Single Piece Extruded 5 Mm Thick Solid Pvc Lock Rail Of Size 115 Mm X 35 Mm, Out Of Which 75 Mm To Be Flat And 20 Mm To Be Tapered At Both Ends, Having 15 Mm Solid Core In Middle Of Rail Section Integrally Extruded, Fixing The Styles & Rails With The Help Of Solvent And Self Driven Self Tapping Screws Of 125 Mm X 11 Mm, Including Providing 5 Mm Single Piece Solid Pvc Extruded Sheet Inserted In The Door As Panel, All Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge. , White Vitreous China Flat Back Wash Basin Size 550X400 Mm With Single 15 Mm C. Brass Pillar Tap. , Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms15mm Nominal Bore.. , Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm), With Necessary Accessories And Screws Etc. Complete , Providing And Fixing Ptmt Soap Dish Holder Having Length Of 138Mm, Breadth 102Mm, Height Of 75Mm With Concealed Fitting Arrangements Weighing Not Lessthan 106 Gms. , Providing And Fixing Mirror Of Superior Glass (Of Approv Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. With Plastic Moulded Frame Of Approved Make And Shades With 6 Mm Thick Hard Board Backing:Rectangular Shape 453X357mm , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan ) With 100 Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests , Marble Stone Flooring With 18 Mm Thick Marble Stone, As Per Sample Of Marble Approved By Engineer-In-Charge, Over 20 Mm (Average) Thick Base Of Cement Mortar 1 :4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Grey Cement Slurry, Including Rubbing And Polishing Complete With : Udaipur Green Marble , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. , Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Persqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing Ridges Or Hips Of Width 60 Cm Overall Width Plain G.S. Sheet Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Dia G.I. Limpet And Bitumen Washers Complete , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete :Gutter (600 Mm Over All Girth) , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). , Providing And Fixing False Ceiling At All Heights With Integral Densified Calcium Silicate Reinforced With Fibre And Natural Filler False Ceiling Tiles Of Size 595X595 Mm Of Approved Texture, Design And Patterns Having Nrc (Noise Reduction Coefficient) Of 0.50 (Minimum) As Per Is 8225:1987, Light Reflectance Of 85% (Minimum). Non Combustible As Per Bs:476 (Part-4), Fire Performance As Per Bs:476 (Part 6 &7), Humidity Resistance Of 100%, Thermal Conductivity 0.043 W/M K As Per Astm 518:1991, In True Horizontal Level Suspended On Inter-Locking Metal Powder Coated T-Grid Of Hot Dipped Galvanised Iron Section Of 0.40 Mm Thick On Silhouette Profile,Rotary Stiched Double Webbed White With 6 Mm Reveal Profile (White/ Black),Comprising Of Main-T Runners Of Size 15X42 Mm Of Length 3000 Mm, Cross - T Of Size 15X42 Mm Of Length 1200 Mm And Secondary Intermediate Cross-T Of Size 15X42 Mm Of Length 600 Mm To Form Grid Module Of Size 600 X 600 Mm, Suspended From Ceiling Using Galvanised Mild Steel Items (Galvanizing @ 80 Grams Per Sqm) I.E. 50 Mm Long, 8 Mm Outer Diameter M-6 Dash Fasteners, 6 Mm Dia Fully Threaded Hanger Rod Upto 1000 Mm Length And L-Shape Level Adjuster Of Size 85X25x2 Mm. Galvanised Iron Perimeter Wall Angle Of Size 22X19x0.40 Mm Of Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 450 Mm Center To Center And 40 Mm Long Dry Wall S.S Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-In-Charge.With 15 Mm Thick Integral Densified Micro Edge Light Weight Calcium Silicate False Ceiling Tiles , Providing And Fixing Thermal Insulation Of Ceiling (Under Deck Insulation) With Resin Bonded Rockwool Conforming To Is: 8183,Density 48 Kg/ M3, 50 Mm Thick, Wrapped In 200 G Virgin Polythene Bags Fixed To Ceiling With Metallic Cleats (50X50x3 Mm) @ 60 Cm And Wire Mesh Of 12.5 Mm X 24 Gauge Wire Mesh, For Top Most Ceiling Of Building. , Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete :250X16 Mm , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete :250X10 Mm , Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Gradeac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete :125 Mm , Providing & Fixing Glass Panes With Putty And Glazing Clips In Steel Doors, Windows, Clerestory Windows Alll Complete With5.5 Mm Thick Glass Panes , Providing Fixing 8Mm Diacp/Ss Jet With Flexible Tube Up To 1 Meter Long With Ss Triangular Plate To Eureopean Type Wc Of Quality And Make As Approved By Engineer In Charge , Constructing Brick Masonry Chamber For Underground C.I. Inspection Chamber And Bends With 75 Class Designation Bricks In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) C.I. Cover With Frame (Light Duty) 455X610 Mm Internal Dimensions, Total Weight Of Cover With Frame To Be Not Less Than 38 Kg (Weight Of Cover 23 Kg And Weight Of Frame 15 Kg) Reinforced Cement Concrete Top Slab With 1:2:4 Mix (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size), Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) Finishedwith F.P.S. Bricksinside Dimensions 455X610 Mm And 45 Cm Deep For Single Pipe Line : , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters:30 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4 Mm Thick Float Glass Panes (Weight Not Less Than 10 Kg Per Sqm) Fixing With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size Wit H Necessary Screws .Second Class Teak Wood30 Mm Thick , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar , Providing And Fixing White Vitreous China Laboratory Sink With C.I. Brackets, C.P. Brass Chain With Rubber Plug, 40 Mm C.P Brass Waste And 40Mm C.P. Brass Trap With Necessary C.P. Brass Unions Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Wall Wherever Required :Size 600X450x200 Mm , Providing And Fixing Factory Made Upvc Glazed/Wire Mesh Windows/ Doors Comprising Of Lead Free Upvc Multi-Chambered Frame, Sash And Mullion/Coupler (Where Ever Required) Extruded Profiles Having Minimum Wall Thickness Of 1.70 Mm For Series R1 And R2 Profiles And 2.10 Mm For Series R3 And R4 Profiles Conforming To En: 12608 In Any Shape, Colour And Design Duly Reinforced With Galvanized Mild Steel Section Made Of Required Shape & Size As Per Cpwd Specification, Upvc Extruded Glazing Beads, Interlocks And Lnline Sash Adaptor (Where Ever Required) Of Appropriate Dimension, Epdm Gasket, Hardware, Ss 304 Grade Fasteners Of Minimum 8 Mm Dia With Countersunk Head, Comprising Of Matching Polyamide Pa6 Grade Sleeve For Fixing Frame To Finished Wall As Per Is 1367 : Part 1 To 14, Plastic Packers, Plastic Caps And Necessary Stainless Steel Screws Etc. Profile Of Frame, Sash &Mullion (If Required) Shall Be Mitred Cut And Fusion Welded/Mechanically Jointed Duly Sealed At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealant Over Backer Rod Of Approved Size And Quality, All Complete As Per Approved Drawing Conforming To Cpwd Specification & Direction Of Engineer-In-Charge. Section Of Steel Reinforcement And Cross Sections Of Upvc Profiles To Be As Per Design Approved By Engineer-In-Charge. Three Track Three Panels Sliding Window With Two Glazed & One Wire Mesh Panels With Aluminium Channel For Roller Track, Wool Pile, Nylon Rollers With Ss 304 Body. , Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface Forplaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. , Providing And Laying Polished Granite Stone Flooring In Requireddesign And Patterns, In Linear As Well As Curvilinear Portions The Building, All Complete As Per The Architectural Drawings, With18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cementmortar 1:4 (1 Cement : 4 Coarse Sand), Laid And Jointed With Cementslurry And Pointing With White Cement Slurry Admixed Withpolishing Etc. All Complete As Specified And As Directed By Theengineer-In-Charge.Polished Granite Stone Slab Jet Black, Cherry Red, Elitbrown, Cat Eye Or Equivalent. , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead :Of Area 3 Sq. Metres And Below , Disposal Of Moorum/Building Rubbish/ Malba/ Similar Unserviceable , Dismantled Or Waste Material By Mechanical Transport Including Loading, Transporting , Unloading To Approved Municipal Dumping Ground For Lead Upto 1 0 Km For All Lifts, Complete As Per Directions Of Engineer-In-Charge . , Providing And Fixing White Vitreous China Laboratory Sink With C.I. Brackets, C.P. Brass Chain With Rubber Plug, 40 Mm C.P Brass Waste And 40 Mm C.P. Brass Trap With Necessary C.P. Brass Unions Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Wall Wherever Required : Size 600X450x200 Mm , Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead.For Thickness Of Tiles 10 Mm To 25 Mm , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item):With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge.Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side , Providing And Fixing Factory Made Upvc Glazed/Wire Mesh Windows/ Doors Comprising Of Lead Free Upvc Multi-Chambered Frame, Sash And Mullion/Coupler (Where Ever Required) Extruded Profiles Having Minimum Wall Thickness Of 1.70 Mm For Series R1 And R2 Profiles And 2.10 Mm For Series R3 And R4 Profiles Conforming To En: 12608 In Any Shape, Colour And Design Duly Reinforced With Galvanized Mild Steel Section Made Of Required Shape & Size As Per Cpwd Specification, Upvc Extruded Glazing Beads, Interlocks And Lnline Sash Adaptor (Where Ever Required) Of Appropriate Dimension, Epdm Gasket, Hardware, Ss 304 Grade Fasteners Of Minimum 8 Mm Dia With Countersunk Head, Comprising Of Matching Polyamide Pa6 Grade Sleeve For Fixing Frame To Finished Wall As Per Is 1367 : Part 1 To 14, Plastic Packers, Plastic Caps And Necessary Stainless Steel Screws Etc. Profile Of Frame, Sash & Mullion (If Required) Shall Be Mitred Cut And Fusion Welded/Mechanically Jointed Duly Sealed At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealant Over Backer Rod Of Approved Size And Quality, All Complete As Per Approved Drawing Conforming To Cpwd Specification & Direction Of Engineer-In-Charge. Section Of Steel Reinforcement And Cross Sections Of Upvc Profiles To Be As Per Design Approved By Engineer-In-Charge.Using R2 Series With Frame (39 Mm & Above) X (39 Mm & Above). (Height Upto 1.2 Metre) , Making Soak Pit 2.5 M Diameter 3.0 Metre Deep With 45 X 45 Cm Dry Brick Honeycomb Shaft With Bricks And S.W. Drain Pipe 100 Mm Diameter, 1.8 M Longcomplete As Per Standard Design.With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.In All Kinds Of Soil. , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Cement Mortar 1 :6 (1 Cement: 6 Coarse Sand) , Cement Plaster 1:3 (1 Cement: 3 Coarse Sand) Finished With A Floating Coat Of Neat Cement.20 Mm Cement Plaster
Contract Date: Jun 15, 2026 Contract Value : 19.78 Lakh
Government Departments No of Bidders 5
Uttarakhand View Result →
Contract Date: Jun 16, 2026 Contract Value : 87,320
Government Departments No of Bidders 1
45.
Power #11296610 AOC
Bids Are invited for Tools And Consumables Allen Key 8 Mm - Unbroko Or Kennedy Lenghth Of The Long Arm 100 Mm Lenghth Of The Short Arm 36 Mm Moc Chrome Vanedium Steel Black Finsh , Allen Key 10 Mm - Unbroko Or Kennedy Lenghth Of The Long Arm 112 Mm Lenghth Of The Short Arm 40 Mm Moc Chrome Vanedium Steel Black Finsh , Allen Key 22 Mm - Unbroko Or Kennedy Lenghth Of The Long Arm 200 Mm Lenghth Of The Short Arm 80 Mm Moc Chrome Vanedium Steel Black Finsh , Slugging Wrench - Mekaster Size 1 Inch Part No Ss-081 Moc Chrome Vanedium Steel Heavy Duty Black Industrial Finish Rust Resistant , Slugging Spanner - Mekaster Size 3/4 Inch Moc Chrome Vanedium Steel Heavy Duty Black Industrial Finish Rust Resistant , Reversible Ratchet Handle Half Inch - Griphold Part No 89_819 Head Dia 64 Mm Head Depth 29 Mm Gear Action 32 Mm Oal 605 Mm , Reversible Ratchet Handle Three Fourth Inch - Griphold Part No Grr 3/4 Inch Head Dia 64 Mm Head Depth 29 Mm Gear Action 32 Mm Oal 605 Mm , Torque Wrench - Mekaster Size 1/2 Inch Square Drive 7_35 Kg Part No Mtw_25R Widtht 50 Mm Height 29 Mm Length 805 Mm Weght 3.9 Kg , Torque Wrench - Mekaster Size 1/2 Inch Square Drive 25_135 Nm Part No Mtw_100R , Torque Wrench - Mekaster Size 1/2 Inch Square Drive 50_220 Nm Part No Mtw_160R , Torque Wrench - Mekaster Size 3/4 Inch Square Drive 135_675 Nm Part No Mtw_500R , Outside Micrometer - Mitutoyo Or Knnedy Or Oxford Range 200_225 Mm Graduation 0.01Mm Material Of The Frame Stainless Steel Material Of The Spindle And Anvil Hardened Stainless Steel , Soft Face Hammer 40 Mm With Steel Handle - Taparia Or Netco 40 Mm Dia , Center Punch - Taparia Length 125 Mm Diameter Of Tip 5 Mm Diameter Of Centre Punch Body 12 Mm Material High Grade Alloy Steel Conformity To Indian Standard Is 7177 1974 Or Equivalent With Latest Amdmnt , Straight Air Drill Machine - Chicago Pneumatic Or Kobe Air Inlet Thread 1/4 Inch Npt Spindle Thread 3/8_24, Minimum Air Hose Size 10 Mm Or 3/8Inch Chuck Capacity Air Pressure 6.5 Kg/Scm Overall Length 227 Mm Speed 2500 Rpm , Air Grinder - Chicago Pneumatic Or Kobe Cut Off Disc 100X2.5X16mm Air Inlet Thread 1/4 Inch Npt Spindle Thread 3/8Inch_24 Hose Size 10 Mm Or 3/8 Inch Air Pressure 6.5 Kg/Scm Overall Length 230 Mm Speed 15000 Rpm , Measuring Tape - Stanley Blade Length 3 Mtrs Blade Width 16 Mm , Tungsten Rotary Cutter 6X5mm - Miranda Size 6X5mm Ball Shape Shank Dia 6Mm , Tungsten Rotary Cutter 6X13mm - Miranda Size 6X13mm Cylindrical Radius End Shank Dia 6Mm , Tungsten Rotary Cutter 6X10mm - Miranda Size 6X10mm Oval Shape Shank Dia 6Mm , Tungsten Rotary Cutter 6X13mm - Miranda Size 6X13mm Cylindrical Shape Shank Dia 6Mm , Flat File - Jk Size 100 Mm Grade Of Cut Second , Half Round File Single Cut Grades Of Cut Second - Jk Length 300 Mm Width 29Mm Thickness 8.5 Mm Length Of Tang 80 Mm Grades Of Cut Second , Half Round File Single Cut Grades Of Cut Bastard - Jk Length 300 Mm Width 29Mm Thickness 8.5 Mm Length Of Tang 80 Mm Grades Of Cut Bastard , Half Round File Double Cut Grades Of Cut Second - Jk Length 300 Mm Width 29Mm Thickness 8.5 Mm Length Of Tang 80 Mm Grade Of Cuts Second , Half Round File Double Cut Grades Of Cut Bastard - Jk Length 300 Mm Width 29Mm Thickness 8.5 Mm Length Of Tang 80 Mm Grade Of Cuts Bastard , Needle File - Kennedy 6 Piece Set Flat Hand Half Round Round Square Three Square , Cutting Wheel - Mico Bosch Or Grind Well Or Makita Or Black Decker Or Carborandum Size 1.0 Mmx16 Mmx100 Mm , Grinding Wheel Or Dc Wheel - Mico Bosch Or Grind Well Or Makita Or Black Decker Or Carborandum Size 4Mmx16mmx100mm , Gas Cutting Torch - Essab India Ltd. Model Cutogen 5 With One Nozzle Fuel Gas Type Oxy_Acetylene Material Brass , Welding Rod Ms 7018 36 H - Essab India Ltd Ms 7018 36 H Size 2.5X350mm Each Packet Containing 130 Pcs , Welding Rod Ss 308 - Essab India Ltd Ss 308 Size 2.5Mmx350mm Each Packet Containing 80 Pcs , Welding Rod Ss 309 - Esab India Ltd Ss 309 Size 2.5Mm X350mm Each Packet Containing 80 Pcs , Emery Paper Grade 120 - Grindwell Or Norton Or Carborundum Size 280X230 Mm As Per Indian Standards Is 3178_1996 Or Latest Al2o3 Percentage Min 55 % , Emery Tape Fine Grade - Carborundum Size W 50 Mmxl 50 Mtrs As Per Indian Standards Is 3178_1996 Or Latest Al2o3 Percentage Min 55 % , Cleaner - Checkmate Can Capacity 330 Ml Can , Developer - Checkmate Can Capacity 330 Ml Can , Penetrant - Checkmate Can Capacity 330 Ml Can , Rustolene Rust Disintegrator - 5 Ltr Can Non Corrosive Flash Point Min 45 Degree Celsius Colour Reddish Shelf Life 12 Months , Wire Brush - Material Of Bristle Steel Wire Materia Of Body Wooden Overall Width Of Brush 40 Mm Length Of Bristle 30 Mm , Tefflon Tape - Ch Ion Brand Thickness 2.5_3 Mils Length 10 Meter Width 1/2 Inch , Tig Electrode - Kennedy Size 2.4 X150 Mm , Air Hose Pipe Wire Embadded - High Pressure Rubber Hoose 3/8 Inch Dia Wire Mesh Type , Masking Tape 50 Mm - Avon Width 50 Mm Length 50 Meter , Ss Wire 1.6Mm - Ss Wire 1.6_304 Grade Soft , Ss Wire 2.4Mm - Ss Wire 2.4Mm_304 Grade Soft , Masking Tape 75 Mm - Avon Width 75 Mm Length 50 Meter , Half Inch Impact Hexagon Bit Socket 6 Mm Drive - Kennedy Or Stanley_Chrome Molybdenum Hexagonal Bit Size 6 Mm Overall Length75 Mm 1/2 Inch Square Drive Part No 89_188_1 , Half Inch Impact Hexagon Bit Socket 8 Mm Drive - Kennedy Or Stanley_Chrome Molybdenum Hexagonal Bit Size 8 Mm Overall Length 75 Mm 1/2 Inch Square Drive Part No_89_189_1 , Half Inch Impact Hexagon Bit Socket 14 Mm Drive - Kennedy Or Stanley_Chrome Molybdenum Hexagonal Bit Size 14 Mm Overall Length 75 Mm 1/2 Inch Square Drive Part No 89_192_1 , Half Inch Impact Hexagon Bit Socket 17 Mm Drive - Kennedy Or Stanley _Chrome Molybdenum Hexagonal Bit Size 17 Mm Overall Length 75 Mm 1/2 Inch Square Drive Part No 89_193_1 , Size 19Mm Three Fourth Inch Drive Socket 12 Point - Kennedy Or Stanley_Chrome Molybdenum Size 19 Mm Overall Length 95 Mm 3/4 Inch Square Drive Part No 89_619_1 , Jack Up Bolt M10 X 150Mm - Full Threaded Hexagonal Head High Tension Jack Up Bolt Metric Standard , Jack Up Bolt M12 X 150Mm - Full Threaded Hexagonal Head High Tension Jack Up Bolt Metric Standard , Jack Up Bolt M16 X 150Mm - Full Threaded Hexagonal Head High Tension Jack Up Bolt Metric Standard , Buff Flap Wheel - 6 Mm Shank Grit P60 Moc Aluminum Oxide , 11Mm Deep Socket 6 Point - 11Mm Drive 3/8 Inch Length 62Mm Code Ken_582_5730K , Combination Plier - Pro_Toque Combination Pliers With Side Cutters Length 180Mm Code Ken_558_4800K , Circlip Plier Set - Bent Nose Pliers Reversible For Both Internal And External Circlip Insertion And Removal Made From High Grade Carbon Steel With Comfortable Insulater Handles Ken_558_5930K , Hydraulic Hand Pump - Model Gp_392 Maximum Pressure 700 Bar , Hydraulic Jack Button Type - Capacity 50 T Stroke 16 Mm Close Height 72 Mm Extended Height 88 Mm , Hydraulic Jack With Hand Pump - Capacity 50 T Stroke 50 Mm Close Height 186 Mm Oil Capacity 354 Cm3 Part No Grac_502 , Air Micro Grinder 120 Degree Angle Grinders 3 Collet - Code No 109 Model Mag_121N 1/8 Part Number 5003109 With Accessories , Air Micro Grinder 90 Degree Angle Grinders 3 Collet - Mag-091N Part Number 50031400 With Accessories , Curbide Rotary Burrs 5X10 Mm - York Abbrasive Size 5X10mm Cylindrical Shape Shank Dia 3Mm , Curbide Rotary Burrs 3X15 Mm - York Abbrasive Size 3X15 Mm Taper Shape Shank Dia 3Mm , Oil Stone Size 150Mmx50mmx25mm Fine Grade - Oil Stone Size 150Mmx50mmx25mm Fine Grade) , Klinger Gasket 1.5Mm, Non Metallic - 1.5M X 2M Klinger 3Xa Caf Jointing Sheets Colour Graphite Black Max Tempreture 550 Deg Centigrade Max Pressure 200 Bar , Tinsnips - 14 Inch Cutting Capacity Cold Rolled Steel 1.20Mm Stainless Steel 0.75Mm, Part No 14_166 Stanely , Cylindrical Grinding Stone 10X20 Mm - Shank Dia 3Mm Part No Ken_250_1770K , Taper Grinding Stone 10X20 Mm - Shank Dia 3Mm Part No Ken_250_0520K , Taper Grinding Stone 21X50 Mm - Shank Dia 6Mm Part No Ken_250_0110K , Cylindrical Grinding Stone 20X50 Mm - Shank Dia 6Mm Part No Ken_250_2080K , Chain Hoist - Capacity 1Ton Standard Lift 3M , Triple Boiled Linseed Oil Sealing Compound - Gas Turbine Casing Joints Sealing Having High Pressure And Temperature Resistance , Premium Polyester Rope - Thickness 1 Inch Length 50 M , Dowsil Rtv Sealant 736 - 100% Silicon Rubber , Pneumatic Connector With Coupling - Size 3/8 Inch Total Quantity : 1100
Contract Date: Ref. Documents Contract Value : 7.76 Lakh
Boards / Undertakings / PSU No of Bidders 4
46.
Educational and Research Institute #11294674 Price Bid
Tender for Purchase Of Equipments ( S.No 1 To S.No 21 ) For Physics Department , Purchase Of Equipments , Joule Calorime Copper Vessel, Battery Eliminator-3A, (2,4,6,8,10,12 V), Tubular Rheostat 20-3.3A, One Way Plug Key, Analog Type Dc Ammeter (0-2A), Voltmeter (0-5V), Thermometer (Alcohol), Stop Clock , Ic Regulated Battery Eliminator Ic Regulated, Input: 230V Ac; Output: 0-12V Dc In Steps Of 2V; Capacity: 1A Or 2A , Galvanometer Moving Coil Type, 30-0-30 Scale, Unbranded With Bhel Specification-Sensitivity 0.143Mm/V , Voltmeter Dc Voltmeter; Range 0-10 V, Analog , Ammeter Dc (0 - 2 Amp) , Parallelogram Apparatus Parallelogram Law Of Forces Apparatus Fitted With Stand , Decade Resistance Box Resistance Box 12 Month Warranty (Dial Type) -Manganin Coil- 2 Dials , Sonometer Apparatus Sonometer With Meter Scale Attached Along With Knife Edge, Tuning Forks Set 256, 384, 512 Ranges, Hammer, Slotted Weight - 500 Gm Each To A Total Of 3 Kg. Brass Wire (5 M) , Travelling Mircroscop Branded Travelling Microscope 0- 200 Mm Horizontal And 0-150 Mm Vertical Measurement , Potentiometer It Features A 1-Meter To 10-Meter Constantan/Manganin Wire Stretched On A Wooden Or Sunmica Baseboard With A Millimeter Scale. It Includes 4Mm Brass Terminals, A Pencil Jockey For Contact, Wire Options (10 Wires), And A Typical Resistance Range Of 10-20 Ohms, Ideal For High-Precision Voltage Measurements. , Viscosity Apparatus Stokes Apparatus With Metre Scale Attached And Long Cylindrical Glass Jar, Glass Beads Small Size (1 Box), Screw Gauge (0-15 Mm) , Rheostat High-Grade Ceramic Tube, Oxidized Resistance Wire, 0.5A-5A, Range 10Ω-100Ω. , Deflection Magnetometer Apparatus Deflection Magnetometer Apparatus With Compass Box And Two Short Bar Magnets , Solar Cell Kit The Apparatus Consist Of Variable Dc Power Supply, Led, Solar Cell And Two Multimeters (Or An Ammeter And A Voltmeter). A Variable Dc Power Supply Of 0-5V. Light Source Is Provided By Led. The Illumination Intensity Of The Led Can Be Controlled , Wheatstone Bride Kit Series Arm: Four Decade Dials In Steps Of Thousands, Hundreds, Tens, & Units Of Ohms. Ratio Arm: The Ratio Arm Of The Bridge Is Capable Of Selecting Multiplying Factor Of 0.001, 0.01, 0.1, 1, 10, 100, 1000 For Resistance Measurements. Two Press Keys Are Provided, One Marked B Is For Battery & One Marked G Is For Galvanometer One Toggle Switch Is Provided For Internal Battery A Sensitive Galvanometer Is Provided In The Bridge. , OhmS Law Verification Kit Battery Eliminator-3A, (2,4,6,8,10,12 V), Tubular Rheostat 20-3.3A, One Way Plug Key, Analog Type Dc Ammeter (0-2A), Voltmeter (0-5V), Standard Resistance Coil Of 1, 2 Ohm (2-Set) Wound On A Wooden Bobbin , BoyleS Law Apparatus The Apparatus Includes The Quill Tube, A Retort Stand, A Clamp, And A Mounted Meter Scale. Quill Tube Specifications: Length: Approximately 50 Cm. Bore Diameter: Uniform Bore, Roughly 1 Mm To 2 Mm. Construction: Glass Tube With One End Sealed. Trapped Substance: A Mercury Pellet (Or Thread) Of Length 10 To 15 Cm Is Introduced To Enclose A Column Of Air. Mounting: Attached To A Half-Meter Or Meter Scale. , Torsion Pendulum Torsional Pendulum Metallic Disc, Symmetrical Masses And Pendulum Stand, Steel Wire , Compound Bar Pendulum One Meter Long Iron Strip Well Painted With Holes At A Distance Of Every 5 Cm And Also With Pair Of Brackets And A Heavy Base Table Top Stand With Stop Clock , Helical Spring Apparatus Structure: A Rigid Support Mounted On A Heavy Metal Base, Typically Cast Iron, To Ensure Stability During Tests. Springs: High-Tensile Steel Spiral Springs, Typically (Approx 25 Mm) Diameter, (100 Mm) Long. Measurement Scale: A Vertical Steel Meter Scale, Usually With (1Mm) Graduations, For Precise Deflection Measurement. Loading Mechanism: A, Typically (50G), Hook-Attached Weight Hanger At The Bottom.Pointer: A Fine Pointer Attached To The Bottom Of The Spring Moves Along The Scale. Accessories: Includes A Set Of Slotted Weights (E.G., (6Times 50G) Or Similar Sets) For Incremental Loading. , Meter Bridge Type: 1 M Length, With Uniform Wire (Resistance Wire) Material: Constantan Or Manganin (Low Temperature Coefficient) Scale: 0-100 Cm, Engraved Or Printed Base: Wooden Or Metal, Rigid, Non-Conductive Support Joints / Terminals: Brass Or Copper, Fixed For Connections 2. Galvanometer Type: Analog, Moving Coil Or Digital (For Null Detection) Range: Sensitive To Detect Micro-Ampere Currents Internal Resistance: High, Typically ~100 Ω Or As Specified 5. Cells / Power Supply Type: Leclanché Cells (1.5 V Each) Or Dc Power Supply Number: 2-4 Cells In Series (Or Supply ~3-6 V) 1
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 8
48.
Public Administrative Department #11290947 Technical Bid
Tender for Cartage Of Malva, Silt, Sludge Kankar And Other Disposable Organic Material Etc. All Complete With Labour T&P Including Cartage Of 8 Km. (Chapter No.3 Si.No.8) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (1 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (2 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (3 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Earth Work In Filling In Ordinary Soil (Loam, Clay Or Sand) Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 8Km. Form The Foundation Trenches Including Royalty@ 9.00 Per Cum. (Chapter No.4 Pwd.Sch.-253(A)+ Cptr No. 3 1 To 8 Km.) , Earth Work In Excavation In Foundation In Ordinary Soil (Loam, Clay Or Sand) Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 30 M Form The Foundation Trenches. (Rate Including Royalty Of Earth Also) (4-Chapter Si.No.1) , Earth Work In Excavation In Foundation In Ordinary Soil Mixed With Moorum Shingle Kankar Requiring The Use Of Special Tools And Plants Such A Pick Axes Subbals Etc. Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 30 M Form The Foundation Trenches. (Rate Including Royalty Of Earth Also) (4-Chapter Si.No.1) , Extra For Earth Work In Embankment Mechanically Compacted To 98% Proctor Density Ln Ordinary Soil, Excavation To Be Done Form Of Regular Pits Not Exceeding 0.5Mtr In Depth And Work In Embankment To Be In 20Cm Layer Including Ramming And Dressing Pulverization Surfacing Including Supply Of Labour, T&P, Roller And Water Sprinkle , Back Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth: Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50M And Lift Upto 1.5 M Incl. Cost Of All Labor Complete As Per Specifications , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 1.50M To 3M. , Supply & Fixing 3.5Kg And Or As Specified By The Manufacture, Harderner In Trexim Concrete Per Sqm. , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 3.00M To 4.50M. , Cleaning Jungles Including Uprooting Of Trunk Vegetation Grass, Bushes, Wood Trees And Sapling Of Girth Upto 30Cm Measured At A Height Of 1 Meter Above Ground Level And Removal Of Rubbish Upto A Distance Of 50 Meters Out Side The Periphery Of Area Cleared. , Removal Of Silt For Nala/Nali In Liquid Mud Or Faul Position With Special T&P Including Lead 30M And Lift Up To 3.00M Etc. All Complete. (As Per Attached Sanctioned Rate Analysis) , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 4.50M To 6.00M. , Earth Work In Cutting Or In Embankment In Ordinary Soil Excavation To Be In The Form Of A Regular Pits Not Exceeding 0.50M In Depth And Earth Work In Embankment To Be In 20Cm Layers Including Ramming And Dressing The Surface To Required Lavels And Slops And Also Including 1.5 M Lift And 30 M Lead. The Earth In Form Of Cutting (B) To Be Used As Spoil Banks Within 50M Distance As Directed By The Engineer-In-Charge Etc. All Complete. (4-Chapter Si.No.3) , Sand Filling In Plinth Including Supply Of Necessary Quality Of Local Sand From A Distance Not Exceeding 8 Kms From The Site Of Work And Including Watering Dressing Etc.Required For Proper Completion Of Work (Chapter No.4 Si.No.6 ) , Providing And Laying Cement Concrete In 1:5:10 (1 Cement :5 Fine Sand 10 Stone Ballast 40 Mm Gauges) And Curing Complete, Including Cost Of Form Work In Foundation And Floors. (5-Chapter Sr.No.1) , Providing And Laying Cement Concrete In 1:4:8 (1 Cement:4 Coarse Sand :8 Graded Stone Aggregate 40 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. In Foundation And Floors (5-Chapter Sr.No.2) , Providing And Laying Cement Concrete In 1:3:6 (1 Cement: 3 Coarse Sand :6 Gladed Stone Aggregate 40 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work In Foundation And Floors. (5-Chapter Sr.No.3) , Providing And Laying Cement Concrete In 1:3:6 (1 Cement: 3 Coarse Sand:6 Graded Stone Aggregate 20 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. In Foundation And Floors. (5-Chapter Sr.No.5) , Providing And Laying Cement Concrete In 1:2:4 (1 Cement: 2 Coarse Sand :4 Graded Stone Aggregate 40 Mm Noffrinal Size) And Curing Complete, Lncluding Cost Of Form Work. Ln Foundation And Floors..(5-Chapter Sr.No.6 Si.No..4.1.3) , Providing And Laying Cement Concrete In 1:1.5:3 (1Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. Ln Foundation And Floors. (5-Chapter Sr.No.7) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement -All Work Up To Plinth Level: 1:2:4 (1Cement: 2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete , Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement - All Work Up To Plinth Leuel:1:2:4 In Raft Foundation (1Cement: 2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement - All Work Trp To Plinth Level : 1:1.5:3 (1 Cement:1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) Ch-S Si No- 5,1.2 , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete,Slab Including The Cost Of Centering, Shutterang, Finishing And Excluding Reinforcement - Above Plinth Level Upto Fifth Floor Lable : 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone , Reinforced Cement Concrete Work In Walls/Columns (Any Thickness), Including Attachedpilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abulments, Posts And Struts Etc. Including Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement:1:1.5:3 (1 Cement: 1.5 Coarse Sand ;3 Graded Stone Aggregate 20 Mm Nominal Size) Upto Plinth Level , Reinforced Cement Concrete Work In Walls/Columns (Any Thickness), Including Attachedpilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abulments, Posts And Struts Etc. Including Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement:1:1.5:3 (1 Cement: 1.5 Coarse Sand ;3 Graded Stone Aggregate 20 Mm Nominal Size) Above Plinth Level Upto Fifth (V) Floor Lable , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Balconies, Shelves, Chajjas, Bands, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Including The Cost Of Centering, Shuttering, Finishing Exlcuding Reinforcement, With 1:1.5:3 In Heavier Beam (1 Cement: 1.5 Coarse Sand(Zone-Lll) : 3 Graded Stone). , Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-25 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying And Including The Cost Of Centering, Shuttering, Finishing But Excluding Reinforcement, Including Admixtures In Recommended Proporlions As Per Ls: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-Incharge.(Note :- Cement Content Considered In This Item Is @ 330 Kg/Cum. Excess/ Less Cement Used As Per Design Mix Is Payable / Recoverable Separately).All Work Up To Plinth Level (5-Chapter S.I. No.-16) , Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-25 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying And Including The Cost Of Centering, Shuttering, Finishing But Excluding Reinforcement, Including Admixtures In Recommended Proporlions As Per Ls: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-Incharge.(Note :- Cement Content Considered In This Item Is @ 330 Kg/Cum. Excess/ Less Cement Used As Per Design Mix Is Payable / Recoverable Separately).All Works Above Plinth Level Upto Floor V Level (5-Chapter S.I. No.-16) , Class-150 (Non Modular) Brick Work In 1:6 Cement And Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.. ( Chapter No. 06 Sr.No. 1) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Foundation And Plinth Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. ( Chapter No. 06 Sr.No. 2) , Class-150 (Non Modular) Brick Work In 1 :4 Cement And Fine Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work (Only 80Mm Thick Wall). (Chapter No. 06 Sr.No.3) , Class-150 (Non Modula0 Brick Work In L:3 Cement And Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work (Chapter No. 06 Sr.No.4) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Super Structrure Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. ( Chapte No. 06 S.I. No. 2+5) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Super Structrure Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. (Chapte No. 06 S.I. No. 2+5) , Class-150 Brick Work In 1:4 Cement And Coarse Sand Mortor In Super Structure Above Plinth Level Upto Floor Five Level For Wall Thickness More Than 12Cm. Including Supply Of All Material, Labour And Tools And Plants Etc. All Complete. {Chapter No.6 Si.No.2+6} , Add Extra To Ltem No. 1 To 4 Above For Super Structure Above Plinth Level Upto Floor Five Level Including Necessary Cutting And Moulding Of Brick Work As Required And Also Including Honey Combed Brick Work In Thickness Of Wall 12Cm And Less. (Chapte No. 06 S.I. No. 2+4) , Add Extra To Ltem No. 1 To 4 Above But In Super Structure Above Plinth Level Upto Floor Five Level Including Necessary Cutting And Moulding Of Brick Work As Required And Also Including Honey Combed Brick Work In Thickness Of Wall 8Cm And Below. (Chapte No. 06 S.I. No. 2+4) , Providing And Laying Damp-Proof Course 40 Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 12.5 Mm Nominal Size). {Chapter No.07 Si.No.1} , Providing And Laying Damp-Proof Course 25 Mm Thick With Cement Concrete 1:2.4 (1 Cement : 2 Coarse Sand :4 Graded Stone Aggregate 12.5 Mm Nominal Size). {Chapter No.07 Si.No.2} , Providing & Applying A Coat Of Residual Petroleum Bitumen Of Grade Vg-10 Of Approved Quality Using 1.7K9 Per Square Metre On Damp Proof Course After Cleaning The Surface With Brushes And Finally With Piece Of Cloth Lightly Soaked In Kerosene Oil.. {Chapter No.07 Si.No.3} , Providing And Fixing Lsl Marked Flush Door Shutters Conforming Lo Ls : 2202 (Part L) Decorative Type, Core Of Block Board Construction With Frame Of 1 St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.Including Lsl Marked Stainless Steel Butt Hinges With Necessary Screws. (Excluding Cost Of Flttings). (A) 35Mm Thick. (Chapter No.9 Si.No.1-9.21.1) , Providing And Fixing Lsl Marked Flush Door Shutters Conforming Lo Ls : 2202 (Part L) Decorative Type, Core Of Block Board Construction With Frame Of 1 St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.Including Lsl Marked Stainless Steel Butt Hinges With Necessary Screws. (Excluding Cost Of Flttings). (2) 30Mm Thick. (Chapter No.9 Si.No.1-9.21.2) , Providing & Fixing 1.00 Mm Thick Decorative High Pressure Laminated Sheet Of Plain/Wood Grain In Gloss/Matt/Suede Finish With High Density Protective Surface Layer And Reverse Side Of Adhesive Bonding Uality Conforming To Is : 2046 Type S, Including Cost Of Aadhesive Of Approved Quality. , Providing And Fixing Factory Made Panel Pvc Door Shutter Consisting Of Frame Made Out Of M.S. Tubes Of 19 Gauge Thickness And Size Of 19 Mm X 19 Mm For Styless And 15X15 Mm For Top & Bottom Rails. M.S. Frame Shall Have A Coat Of Steel Primers Of Approved Make And Manufacture. M.S. Frame Covered With 5 Mm Thick Heat Moulded Pvc C Channel Of Size 30 Mm Thickness, 70 Mm Width Out Of Which 50 Mm Shal Be Flat And 20 Mm Shalll Be Tapered In 45 Degree Angle On Both Sides Forming Styless And 5 Mm Thick, 95 Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered In 45 Degree On The Inner Side To Form Top And Bottom Rail And 115 Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered On Both Sides To Form Lock Rail And Lock Rails Shall Be Top, Bottom And Lock Rails Shall Be Provided Both Sides Of The Panel. 10 Mm (5 Mm X 2) Thick, 20 Mm Wide Cross Pvc Sheet Be Provided As Gap Insert For Top Rail & Bottom Rail. Paneling Of 5 Mm Thick Both Side Pvc Sheet To Be Fitted In The M.S. Frame Welded/Sealed To The Styles & Rails With 7 Mm (5 Mm + 2 Mm) Thick X 15 Mm Wide Pvc Sheet Beading On Inner Side, And Joined Together With Solvent Cement Adhesive. An Additional 5 Mm Thick Pvc Strip Of 20 Mm Width Is To Be Stuck On The Interrior Side Of The C Channel Using Pvc Solvent Adhesive Etc. Complete As Per Direction Of Engineer-In-Charge, Manufacturers Specification & Drawing.30 Mm Thick Pre Laminated Pvc Door Shutters , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Ls: 733 And Ls: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdiv] Rubbe, Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Requlred Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately). Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Ls: 1868, Minimum Anodic Coating Of Grade Ac 15) , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Ls: 733 And Ls: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdiv] Rubbe, Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Requlred Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately). Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber/ Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber/ Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item):With Float Glass Panes Of 5.5 Mm Thickness , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item):With Float Glass Panes Of 8.0 Mm Thickness , Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is : 6315 , Having Brand Logo Embossed On The Body/ Plate With Double Spring Mechanism And Door Weight Upto 125 Kg, For Doors Including Cost Of Cutting Floors ,Embeding In Floors As Required And Making Good The Same Matching To The Existing Floor . Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Entineer-In-Charge. With Stainless Steel Cover Plate Minimum 1.25 Mm Thickness. , Providing And Tixing Factory Made Upvc White Colour Casement/ Casement Cum Frxed Glazed Door Comprising Of Upvc Multi-L Chambered Frame. Sash And Mullion (Where Ever Required) Extrlcled Profiles Dl,Ly Reinforced With 1.60 T 0 2 Mm Thick I Galvalized Mild Steel Section Made From Roll Forming Process Of Iequrred Length {Shape & Size According To Upvc Profile), I Ldvc Extruded Glazing Beads Of Appropriate Dimension. Epdi\/L Gasket. Znc Alloy (White Powder Coated) 3D Hrnges And One Handle On Each Side Of Panels Along With Zinc Plated Mild Steel Rnulti Point Locking Having Transmission Gear, Cylinder With Keeps And One Sicle Key, G.L Fasteners 100 X I Mm Size For Fixing Frame To Finished Wall And Necessary Stainless Steel Screws Etc. Profile Of Frame & Sash Shall Be Mitred Cut And Fusion Welded At All Corners, Mullion (If Required) Shall Be Also Fusion Weldecl Including Drilling Of Holes For Fixing Hardwares And Drainage Of Water Etc. Afier Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealent Over Backer Rod Of Required Size And Of Approvecl Quality, All Complete As Per Approved Drawing & Cllrection Of Engineer-In-Charge. (Single I Double Glass Panes And Sllicon Sealent Shall Be Paid Separately) Note: For Upvc Frame, Sash And Mullion Extruded Profiles Minus 5% Tolerance In Dlrnension I.E. In Depth & Width Of Profile Shall Be Acceptable Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made. Casement Door With 3D Hinges Made Of (Big Series) Frame 67 X 64 Rm & Sasn 67 X 1 10 Mm Both Having Wall Thickness Of 2.3 I 0.2 ^Rr Ancl Single Glazing Bead / Double Glazing Bead Of Lappopiate D.Mersion. (Area Of Door Upto L2 00 Sqm). , Providng And Fixing Fictory Made Solid Foam Upvc Profile For Kitchen Cabinet Fram E (45 X 20 Mm) Of Approved Shade, Quality Ancl Make. The Profile Shall Be Laminated On Both Sides, Made From Rigid Foam Sheets (Single Extruded) Having Density 600 Kg/Cum And The Exposed Edges Sealed With Pvc Edge Beading Of Same Shade And Colour. The Frame Shall Be Fire Retardent With Necessary Screw Holding Capacity. Frame Shall Be Fixed To Wall Using Expendable Fastner With Necesary Stainless Steel Screws, All Complete As Per Direction Of Engineer-In- Charge , Providng And Fixing Fictory Made Solid Foam Upvc Profile For Kitchen Cabinet Fram E (45 X 20 Mm) Of Approved Shade, Quality Ancl Make. The Profile Shall Be Laminated On Both Sides, Made From Rigid Foam Sheets (Single Extruded) Having Density 600 Kg/Cum And The Exposed Edges Sealed With Pvc Edge Beading Of Same Shade And Colour. The Frame Shall Be Fire Retardent With Necessary Screw Holding Capacity. Frame Shall Be Fixed To Wall Using Expendable Fastner With Necesary Stainless Steel Screws, All Complete As Per Direction Of Engineer-In- Charge , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Structural Steel Work In Single Section, Fixed With Or Withoul Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting,Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required Heavy Size Such As Trusses Built , Providing And Fixing In Position Collapsible Steel Shutters With Vertical Channels 20X10x2 Mm And Braced With Flat Iron Diagonals 20X5 Mm Size, With Top And Bottom Rail Of T-Iron 40X40x6 Mm, With 40Mm Dia Steel Pulleys, Complete With Bolts, Nuts, Locking Arrangement, Stoppers, Handles, Including Apptying A Priming Coat Of Approved Steel Primer.(Chapter No.10 Si.No.4-10.3) , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pjpe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Ls: 4454 - Part 1 And L\4.S. Top Cover Of Required Thickness For Rolling Shutters.. 80X1.25 Mm M.S. Laths With 1 .25 Mm Thick Top Cover (Upto 10.00 Sqm).(Chapter No.10 Si.No.4-10.5) , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Ls: 4454 - Part 1 And L\Il.S. Top Cover Of Required Thickness For Rolling Shutters.. 80X,1.25 Mm M.S. Laths With 1 .25 Mm Thick Top Cover Extra For Providing Mechanical Device Chain And Crank Operation For Operating Rolling Shutters. Exceeding 10.00 Sqm And Upto 16.80 Sqm/Above In The Area , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc, Complete. Hot Finished Welded Type Tubes , Supply And Fixing Stainless Steel (Grade 304) Ralling Made Of Hollow Tubes, Channels, Plates Etc. Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Steel Nuts And Bolts Complete. I/C Fixing The Ralling With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer In-Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts Fasteners Etc.). (Chapter No.10 Si. No. 14 New) , Providing & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15X3 Mm And Nuts & Bolts Complete Galvanised M.S. Wire Gauze With 0.63 Mm Dia Wire And 1 .4 Mm Aperture On Both Sides , Providing & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15X3 Mm And Nuts & Bolts Complete Stainless Steel (Grade 304) Wire Gauze Of 0.5 Mm Dia Wire And 1.4 Mm Aperture On Both Sides , Painting Top Of Roofs With Bitumen Of Approved Quality @ 17Kg Per 10 Sqm Impregasted With A Cost Of Coarse Sand At 60 Codm Per 10 Sgm, Including Cleaning The Slab Surface With Keroseme Oil Complete : With Residual Type Petroleum Bitmen Of Grade Vg-10 , Providing And Laying Integral Cement Based Water Proofing Itreatment Including Preparation Of Surface As Required For Itreatment Of Roofs, Balconies, Terraces Etc Consisting Of Lfollowing Operations: (A) Applying A Slurry Coat Of Neat Cement Lusing 2.75 Kg/Sqm Of Cement Admixed With Water Proofing Lcompound Conforming To Ls. 2645 And Approved By I E Ng Ineer-In-Charge Over The Reinforced Cement Concrete Slab Including Adjoining Walls Lupto 300 Mm Height Including Cleaning The Surface Before Llreatment. B) Laying Brick Bats With Mortar Using Broken Bricks/Brick Bats 125 Mm To 115 Mm Size With 50% Of Cement Mortar 1:5 (1 L Cement : 5 Coarse Sand) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge Over 20 Mm Thick Layer Of Cement Mortar Of Mix 1:5 (1 Cement :5 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge To Required Slope And Treating Similarly The Adjoining Walls Upto 300 Mm Height Including Rounding Ofjunctions Of Walls And Slabs. (C) After Two Days Of Proper Curing Applying A Second Coat Of Cement Slurry Using 2.75 Kg/ Sqm Of Cement Admixed With Water Proofing Compound Conforming To Lb : 2645 And Approved By Engineer-In-Charge (D) Finishing The Surface With 20 Mm Thick Jointless Cement Mortar Of Mix L:4 (1 Cement :4 Coarse Sand) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge Includlng Laying Glass Fibre Cloth Of Approved Quality In Top Layer Of Plaster And Finally Finjshing The Surface With Lrowel With Neat Cement Slurry And Making Pattern Of 300X300 Mm Square 3 Mm Deep (E) The Whole Terrace So Finished Shall Be Flooded With Water For A Minimum Period Of Two Weeks For Curing And For Final Test.All Above Operations To Be Done In Order And As Directed And Specified By The Engineer-In-Charge :Wth Average Thickness Of 120 Mm And Minimum Thickness At Khurra As 65Mm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 1.00 Mm Thick With Zinc Coating Not Less Than 275 Gm/Sqm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 80 Mm Thick With Zinc Coating Not Less Than 275 Gm/ Sqm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm/ M , Providing And Laying Six Courses Water Proofing Teatment With Bitumen Felt Over, Roofs Consisting Of First, Third And Llfth Course Of Blown Bitumen 85/25 Or 9O/15 Conforming To Ls : 702 Applied Hot @ 1.45, L.2O And 1.45 Kg Per Square Metre Of Area Respitively, Second And Fourth Courses Of Roofing Felt Lype 3 Grade I Conforming To Ls : 1322 (Hessian Based Self Flnished ;Itumen Felt) , Sixth And Final Course Of Stone Grit 6 Mm And Down Size Or Pea Sized Gravel Spread At 6 Cubic Decimeter Per Sqm Iniluding Preparation Of Surface But Excluding Grading, Complete. , 10 Cm Thick (Average) Mud Phaska Of Damped Brick Earth On Roofs Laid To Slope Consolidated And Plastered With 25 Mm Thick Mud Mortar Mixed With Bhusa @ 35 Kg Per Cum Of Earth And Gobri Leaping With Mix 1:1 (1 Clay: 1 Cow Dung) And Covered With Flat Tile Bricks, Grouted With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Mixed With 2% Of Integral Water Proofing Compound By Weight Of Cement And Finished Neat: With Common Burnt Clay F.P.S.(Non Modular) Brick Tile Of Class Designation 10 , Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineerin-Charge) 0 50 Mm (+ 0.05 %) Total Coated Hickness With Zinc Coating 120 Grams Per Sqm As Per Ls: 277, In 240 Mpa Steel Grade, 5-7 Icrons Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge, The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing Precoated Galvanised Steel Sheet Roollng Accessories 0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Ls: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete :Ridges Plain (500 - 600Mm) , Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Ls: 12823 Grade Ltype Ll, In Anelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge.Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side , Providing And Fixing 12 Mm Thick Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows (Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured). Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick. I\4Arine Plywood Conforming To Ls: 710 , Providing And Fixing Tiled False Ceiling Of Specilled Materials Of Size 595X595 Mm In Lrue Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanlzed @ 120 Grams/ Sqtn, Both Side Inclusive) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick (Minimum) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet, 1200 Mm Long Spaced Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel Lo Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting/Making, Opening For Services Like Diffusers, Grills, Iight Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gl Slotted Cleats Of Size 27 X 37 X 25 X1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gl Adjustable Rods With Galvanised Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T- Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer-In-Charge. Gl Metal Ceiling Lay In Plain Tegular Edge Global White Color Tiles Of Size 595X595 Mm, And 0.5 Mm Thick With 8 Mm Drop; Made Of G Lsheet Having Galvanizing Of 100 Gms/Sqm (Both Sides Inclusive) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns (Minimum), Including Factory Painted After Bending , Providing And Fixing False Ceiling At All Heights With Integral Densified Calcium Silicate Reinforced With Fibre And Natural Filler False Ceiling Tiles Of Size 595X595mm Of Approved Texture, Design And Patterns Having Nrc (Noise Reduction Coefficient) Of 0.50 (Minimum) As Per Ls 8225:1987, Light Reflectance Of 85%(Minimum). Non Combustible As Per Bs:476 (Part-4), Fire Performance As Per Bsi476 (Part 6 &7), Humidity Resistance Of 100%, Thermal Conductivity 0.043 W/M K As Per Astm 518:1991,In True Horizontal Level Suspended On Inter- Locking Metal T-Grid Of Hot Dipped Galvanised Iron Section Of 0.33Mm Thick (Galvanized @ 120 Grams Per Sqm Including Both Sides) Comprising Of Main T Runners Of Size 24X38 Mm Of Length 3000 Mm, Cross - T Of Size 24X32 Mm Of Length 1200 Mm And Secondary Intermediate Cross-T Of Size 24X32 Mm Of Length 600Mm To Form Grid Module Of Size 600 X 600 Mm, Suspended From Ceiling Using Galvanised Mild Steel Items (Galvanizing @ 80 Grams Per Sqm) I.E. 50 Mm Long, I Mm Outer Diameter M-6 Dash Fasteners, 6 Mm Dia Fully Threaded Hanger Rod Upto1000 Mm Length And L-Shape Level Adjuster Of Size 85X25x25x2 Mm. Galvanised Iron Perimeter Wall Angle Of Size 24X24x0.40 Mm Ol Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 460 Mm Center To Center And 40 Mm Long Dry Wall S.S Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-Incharge. With 15 Mm Thick Tegular Edged Light Weight Calcium Silicate False Ceiling Tiles. , 12Mm Cement Plaster With Cement Mortar In Proportion Of L:4 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Flool Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceedlng 80Mm. Ln Girth And Finished Even And Smooth. , 12Mm Cement Plaster With Cement Mortar In Proportion Of L:6 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Flool Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceedlng 80Mm. Ln Girth And Finished Even And Smooth. , 12Mm Cement Plaster With Cement Mortar In Proportion Of 1:4 Cement & Fine Sand (Not Less Than In 1.25 Fm) Of Single Coat For Interior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 15Mm Cement Plaster With Cemeni Mortar In Proportion Of 1:3 Cement &.Coarse Sand Of Single Coat For Exterior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 15Mm Cement Plaster With Cemeni Mortar In Proportion Of 1:4 Cement &.Coarse Sand Of Single Coat For Exterior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 20 Mm Cement Plaster 1:3 (L Cement:3 Coarse Sand) Linished With A Floating Coat Of Neat Cement. , 20Mm Cement Plaster With Cement Mortar In Proportion Of L:4 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding Bomm. Ln Girth And Finished Even And Smooth , 6Mm Thick Celling Plaster 1:3 (1 Cement :3 Fine Sand) Cement & Fine Sand In F.M Not Less Than 1.25, 1:3 Including Chipping Of Reinforced Cement Concrete Surface Before Celing Plaster. The Cost Of Including At Material, Labor T&P And Scafolding Etc Complete. (Chapter No.13 Si.No.13) , Supply/Fixing Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Morlar1:4 (1 Cement: 4 Coarse Sand) , Supply/Fixing Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Including 50Mm Thick Base With Concrete 1:4Rb Complete As Per E/L , Marble Tiles Stone Slabs 18 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete , Marble Stone Flooring With 20 Mm Thick Marble Stone, As Per Sample Of Marble Approved By Engineer-In-Charge, Over 20 Mm (Average) Thick Base Of Coment Mattar 1:4 (1 Cement: 4 Coarse Sand) Lald And Jointed Wlth Grey Cement Slurry, Including Rubbing And Polishing Complete With : Marble White Dhungriquality , Marble Stone Flooring With 20 Mm Thick Marble Stone, As Per Sample Of Marble Approved By Engineer-In-Charge, Over 20 Mm (Average) Thick Base Of Coment Mattar 1:4 (1 Cement: 4 Coarse Sand) Lald And Jointed Wlth Grey Cement Slurry, Including Rubbing And Polishing Complete With: White Alebeta White Stone , Kota Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1: 4 (1 Cement: 4 Coarse Sand) : 25 Mm Thick , Kota Stone Slabs 20 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete , 40 Mm Thick Fine Dressed Stone Flooring Over 20 Mm (Average) Thick Base Of Cement Moftar 1:5 (L Cement: 5 Coarse Sand)With Joints Finished Flush.Red Sand Stone , Prividing & Laying Ceramic Non Skid Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming Tq Ls : 15622 Of Approved Make In Colours Such As White, Lvory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Ioints With White Cement And Matching Pigment Etc., Complete. , Providing & Fixing 1St Quality Ceramic Glazed Floor Tiles Conforming To Ls : 15622 (Thickness To Be Specified By The Manufacturer )Of Approved Make In Atl Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-Incharge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Morta|L:3 (1 Cement: 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 33Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Providing And Laying Vitrified Tiles 500X500mm Size (Thickness 10Mm), With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand Manufacture, In Desired Colours And Shades, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 15477, Including Grouting Of Joints. Including 75Mm Thick Base With Concrte 1:4:8 Complete As Per E/I Etc. All Complete. (Chapter No.14 Sr.No.20) , Providing And Laying Vitrified Tiles 600X600mm Size (Thickness 10Mm), With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand Manufacture, In Desired Colours And Shades, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 15477, Including Grouting Of Joints. Including 75Mm Thick Base With Concrte 1:4:8 Complete As Per E/I Etc. All Complete. (Chapter No.14 Sr.No.20) , Providlng And Laying Polished Granite Jet Black Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge.{Chapter No.14 Si.No.27} , Stone Work (Machine Cut Edges) For Wall Llning Etc. (Veneer Work) Upto10 Metre Height, Backing Filled With A Grout Of Avercge 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Polnting In White Cement Mortar 1:2 (1 White Cement R 2 Stone Dust) Wlth An Admixture Of Pigment Matching The Stone Shade: (To Be Secured To The Backing And The Sides By Means Of Cramps And Plns Which Shall Be Paid For Separately) Red Sand Stone - Exposed Face Flne Dressed With Rough Backing. 30 Mm Thick , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. Including Curing The Cost Of All Material, Labour, T&P Etc. Complete. (Chapter No.15 Si.No.1) , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Including Cost Of All Materials, Labour T&P Etc Required For Proper Completion Ofwork. , Finishing Walls With Water Proofing Cement Paint Of Required Shade : New Work (Two Or More Coats Applied @ 3.84 Kg/10 Sqm) Supply Of All Labour Material And T&P Requlred For Proper Completion Of Work. , Finishing Walls With Textured Exterior Paint Of Required Shade New Work (Two Or More Coats Applied @ 328 Ll Lo Sqm) Over And Including Priming Coat Of Exterior Primer Applied @ 2.20K9/10 Sqm Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade ; New Work (Two Or More Coat Applied @ 1.67 Llth) Sqm Over And Including Priming Coat Ofexterior Primer Applied @ 2 20 Kg/10 Sqm) Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/L0 Sqm Over An Under Coat Of Primer Applled @ O.B0 Ltr/10 Sqm Of Approved Brand And Manufacture. Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacturb Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Paint Of The Two Coat Over Primer Coat Wood Surface And Etc. All Complete.(15-Chapter Si.No.8+10+11) , Painting Lines, Dashes, Arrows, Etc. On Roads Ln Two Coats On New Work Painting Lines, Dashes, Arows, Etc On Roads In Two Coats On New Work Wilh Ready Mixed Road Marking Paint Cinforming To Ls:164 On Bituminolls Surface, Including Cleaning The Sullace Of At Dirt, Dusi And Other Fore Gn Matte., Demarcation At Site And Trafllc Control . Upto 10 Cm In Width , Applying Priming Coat: With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood) Including Cost Of All Materials, Labour T&P Etc Required For Proper Completion Of Work , Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade Two Or More Coats On New Work Includlng Cost Of All Materials, Labour T&P Etc. Required For Proper Completion Of Work Wood And Steel , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Distempering With 1St Quality Acrylic Distemper, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour..One Coat Including The Cost Of All Material, Labour, T&P Etc Complete. , Distempering With 1St Quality Acrylic Distemper, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour..Two Coat Including The Cost Of All Material, Labour, T&P Etc Complete. , Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Sudace Smooth Including Necessary Repairs To Scratches Etc. Complete. , Distempering With Lst Quality Acrylic Distember (Ready Mix) Having Voc Content Less Than 50 Grams/ Litre Of Approved Brand And Manufacture To Give An Even Shade:Old Work (One Or More Coats) , White Washing Wth Lime On Undecorated Wall Surface (One Coat) To Give An Even Shade Including Thoroughly Brooming The Surface To Remove All Dirt, Dust Mortar Drop And Loose Scales Of Lime Wash And Other Foreign Matter. , White Washing Wth Lime On Undecorated Wall Surface (Three Or More Coats) To Give An Even Shade Including Thoroughly Brooming The Surface To Remove All Dirt, Dust Mortar Drop And Loose Scales Of Lime Wash And Other Foreign Matter. , Colour Washing Such As Green, Blue And Other Coloures Or Buff To Give An Even Shade New Work Colour Washing (Two Coats) With A Base Coat Of White Washing With Limes Including Cost Of All T&P Other Complete Work. , Removing White Or Colour Wash By Scrapping And Sand Papering And Pteparing The Surface Smooth Including Necessary Repairs To Scratches Etc Complete , Demolishing Cement Concrete Manually Including Disposal Of Materialwithin 50 Metres Lead , Dismantling Reinforced Cement Concrete Or Reinforced Brick Work Including Stacking Of Materials As Directed By E/Ic With In A Distance Of 60 Meters (200 Feet). (17-Chapter Pwd. No.694) , Demolishing R.B. Work Manually/ By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-Incharqe. , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge In Cement Mortar. (17-Chapter Si.No.6) , Demolishing Stone Rubble Masonry Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Eng;Neer-In-Charge : Ln Lime Mortar , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead Of Area 3 Sq. Metres And Below , Dismantling Steel Work In Single Sections Including Dismembering And Stacking Within 50 Metres Lead In: R.S. Joists , Dismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. (17-Chapter Si.No.16) , Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Wlthin 50 Metres Lead. , Dismantling Of Old Interlocking Tiles Pavement Including Staking Of Serviceable Material And Disposal Of Unserviceable Material Within Lead Of 50M As Per Direction Of Engineer In Charge. (Ns) , Random Rubble Masonry 1:6 (1 Cement: 6 Coarse Sand), With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size).Upto Plinth Level With , Random Rubble Masonry 1:6 (1 Cement : 6 Coarse Sand), With Hard Stone In Superstructure Above Plinth Level And Upto Floor Five Level, Including Leveling Up With Cement Concrete 1:6:12 (L Cement:6 Coarse Sand:12 Graded Stone Aggregaie 20 Mm Nominal Size) At Window Sills, Ceiling Level And The Like , 30 Mm Red Sand Stone Sun-Shade (Chisel-Dressed) Supported On Red Sand Stone Brackets, Fixed In Walls With Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Finishing Complete. , Providing And Fixing Red Sand Stone Jali 40 Mm Thick Throughout In Cement Mortar 1R3 (1 Cement : 3 Coarse Sand), Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment, Matching The Stone Shade, Jali Slab Without Any Chamfers Etc , Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement: 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade: (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) Red Sand Stone - Exposed Face Fine Dressed With Rough Backing. 30 Mm Thick (Chapter No.18 Si.No.7) , Supply And Fixing 500 Liter Pvc. Sintex Water Tank Etc. All Complete. (19-Chapter Sr.No.2(C)) , Laying Brick Soling Layer On Prepared Sub-Grade With Brick On End Edging According To Lines, Graded And Cross-Section Shown On The Drawing Filling Joints With Sand And Earth, Spreading 25 Mm Thick Layer Of Earth Over Brick Soling, Watering And Rolliing The Same With Three Wheel Road Roller 80-100 Kn As Per Technical Specification Clause 412 , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 350Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 600Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 900Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1000Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1200Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1400Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 350Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 600Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 900Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1000Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1200Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1400Mm Dia , Constuction Of Un-Reinforced, Plain Cement Concrete Avement Thickness As Per Disign, Over A Prepared Sub Base With 43 Grade Cement Or Any Other Type As Per Clause 1501.2.2 M-30 (Grade), Coarse And Fine Aggregate Conforming To Is 383, Maximum Size Of Coarse Aggregate Not Exeeding 25Mm, Mixed In A Concrete Mixer Of Not Less Than 0.2 Cum Acapacity And Apporopriate Weigh Batcher Using Approved Mix Design, Laid In Approved Fixed Side Formwork (Steel Channel, Laying And Fixing Of 125 Micron Thick Polythene Film Wedges, Steel Plates Including Levelling The Formwork As Per Drawing), Spreading The Concrete With Shovels, Rakes, Compacted Using Needle, Screed And Plate Vibrators And Finished In Continous Aperation Including Provision Of Contraction, Expansion, Construction And Constructionl Joints, Applying Debonding Strips, Primer, Sealant, Dowel Bars, Near Approaches To Bridge/Culvert And Construction Joints, Admixtures As Approved, Curing Of Concrete Slabs For 14 Days, Curing Comound (Where Apecified) And Water Finishing To Lines And Grade As Per Drawing And Technical And Technical Sepcification Clause 1501. (For Agra). (Chapter No.20 Si.No.12) , Construction Of Un-Reinforced, Plain Cement Concrete Pavement Over A Prepared Sub Base With Approve Grade Cement @ 400 Kg Per Cum, Coarse And Fine Aggregate Conforming To Ls 383, Maximum Size Of Coarse Aggregate Not Exceeding 25 Mm, Mixed In A Batching And Mixing Plant As Per Approved Mix Design, Transported To Site, Laid With A Fixed Form Or Slip Form Paver, Spread, Compacted And Finished In A Continuous Operation Including Provision Of Contraction, Expansion, Construction And Longitudinal Joints, Joint Filler, Separation Membrane, Sealant Prim Er, Joint Sealant, Debonding Strip, Admixtures As Approved, Curing Compound, Finishing To Lines And Grades As Per Drawing For Agra , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Rubber Molded Coloured) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 80 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 80 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work.80 Mm (Rubber Molded Coloured) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Rubber Molded Coloured) , Re-Laying Of I Shaped Precast Interlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50Kg) Including 25Mm Thick Loacal Sand Base Levelling And Ressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Comlete Work. Including Vat (Chapter No.20 Si.No.19 New Item) , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 15Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 20Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 25Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe. (Lnternal Work - Exposed On Wall) 32Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 40Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 50Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.15Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.20Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.25Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.32Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 15 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 20 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 25 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 32 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 40 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 50 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 62.50 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 75 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 100 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 150 Mm Nonrinal Dia Pipes , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 15 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 20 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 25 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 32 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 40 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 50 Mm Dia Nominal Bore , Providing & Fixing Gl Pipes Complete With Gl Fittings And Clamps Including Making Good The Walls Etc. Concealed Pipe Including Painting With Anti Corrosive Bitumastic Paint, Cutting Chases And Making Good The Wall: 15 Mm Dia Nominal Bore , Providing & Fixing Gl Pipes Complete With Gl Fittings And Clamps Including Making Good The Walls Etc. Concealed Pipe Including Painting With Anti Corrosive Bitumastic Paint, Cutting Chases And Making Good The Wall: 20 Mm Dia Nominal Bore , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 60X60x75 Cm Lnside , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 90X90x100 Cm Lnside , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 120X120x100 Cm Lnside , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Liter Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, Manually Controlled Device (Handle Lever) Conforming To Is: 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Wall And Floors Wherever Required : White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With With Integral Type Foot Rests. (Chapter No.24 Si. No.1) , Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Ls : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: W.C. Pan With Lsl Marked White Solid Plastic Seat And Lid , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required One Urinal Basin With 5 Litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Two Urinal Basins With 5 Litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Three Urinal Basins With L0litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Four Urinal Basins With L0litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require: (White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C. P. Brass Pillar Taps) {Chapter No.24 Si.No.5A} , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 630X450 Mm With A Single 15 Mm C.P. Brass Pillar Tap , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pajr Of 15 Mm C.P. Brass Pillar Taps , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Flat Back Wash Basin Size 550X400 Mm With Single 15 Mm C.P. Brass Pillartap , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350mm With White Pvc Automatic Flushing Cistern, With Fittings, Standared Size C.P. Brass Flush Pipe, Spreaders With Union And Clamps (All In C.P. Brass) With Waste Fitting As Per Is: 2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fitting And Cutting And Making Good Thg Walls And Floors Whereever Required: Single Half Stall Urinal With 5 Litre Pvc. Automatic Flushing Cistern. (Chapter No.24 Si.No.6A) , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350 Mm With White Pvc Automatic Flushing Cistern, With Fittings, Standard Size C.P. Brass Flush Pi Pe, Spreaders With Unions And Clamps (All In C.P. Brass) With Waste Fitting As Per Ls:2556, C.L. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fittlngs And Cutting And Making Good The Walls And Floors Wherever Requlred:Range Of Two Half Stall Urinals With 5 Litre Pvc. Automatic Flushing Cistern , Constructing Brick Masonary Chamber For Underground C.I. Inspection Chamber And Bends With Bricks In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) C.I. Cover With Frame (Light Duty) 455X610mm Internal Dimensions, Total Weight Of Cover With Frame To Be Not Less Than 38Kg (Weight Of Cover 23Kg And Weight Of Frame 15Kg), Reinforced Cement Concrete Top Slat With 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1 :5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40Mm Nominal Size), Inside Plastering 12Mm Thick With Cement Mortal 1:3 (1 Cement : 3 Coarse Sand), Finished Smooth With A Floating Coat Of Neat Cement On Walls And Bed Concrete Etc. Complete As Per Standard Desing: (A) Inside Dimensions 455X610mm And 45Cm Deep For Single Pipe Line : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation M-150). {Chapter No.25 Si.No.6A) , Constructing Brick Massonry Chamber For Underground C.I. Inspection Chamber And Bends With Bricks In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) C.I. Cover With Frame (Light Duty) 600X850mm Internal Dimensions, Total Weight Of Cover With Frame To Be Not Less Than 38Kg (Weight Of Cover 23Kg And Weight Of Frame 15Kg), Reinforced Cement Concrete Top Slat With 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1 :5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40Mm Nominal Size), Inside Plastering 12Mm Thick With Cement Mortal 1:3 (1 Cement : 3 Coarse Sand), Finished Smooth With A Floating Coat Of Neat Cement On Walls And Bed Concrete Etc. Complete As Per Standard Desing: (C) Inside Dimensions 600X850mm And 45Cm Deep For Pipe Line With Three Or More Inlets : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation M-150). {Chapter No.25 Si.No.8C) , Reinforced Cement Concrete M15 Grade Kilometre Stone Of Standard Design As Per Irc:8, Fixing In Position Including Painting And Printing Etc Sl No-804 As Per Direction Of Enginee-In-Charges Morth Standard Data Book. 5Th Kilometre Stone (Precast) (10 Cm Height Each) Hindi Letters , Reinforced Cement Concrete M15 Grade Kilometre Stone Of Standard Design As Per Irc:8, Fixing In Position Including Painting And Printing Etc Sl No-804 As Per Direction Of Enginee-In-Charges Morth Standard Data Book. 5Th Kilometre Stone (Precast) (10 Cm Height Each) English Letters , Reinforced Cement Concrete M15 Grade Boundary Pillars/ Wheel Guard Of Standard Design As Per Irc:25-1967, Fixed In Position Including Finishing And Lettering But Excluding Painting , Providing And Fixing L2 Metres High Gl Barbed Wire Fencing With 1.8 M Angle Iron Posts 40 Mm X 40 Mm X 6 Mm Placed Every 3 Metres Center To Center Founded In M15 Grade Cement Concrete, 0.6 Metre Below Ground Level, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only And Provided With T Horizontal Lines And 2 Diagonals Intemoven With Horizontal Wires, Fixed With Gi Staples, Turn Buckles Etc. Complete As Per Clause 817 As Per Direction Of Enginee-Incharges Morth Standard Data Book. G.L Barbed Wire Fencing 1.2 Metre High , Providing And Fixing L2 Metres High Gl Barbed Wire Fencing With 1.8 M Angle Iron Posts 40 Mm X 40 Mm X 6 Mm Placed Every 3 Metres Center To Center Founded In M15 Grade Cement Concrete, 0.6 Metre Below Ground Level, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only And Provided With T Horizontal Lines And 2 Diagonals Intemoven With Horizontal Wires, Fixed With Gi Staples, Turn Buckles Etc. Complete As Per Clause 817 As Per Direction Of Enginee-Incharges Morth Standard Data Book. G.L Barbed Wire Fencing 1.8 Metre High , Deduction Of Cost Brick/Bats. (Chapter No.1 Sr.No.2(C)) , Deduction Cost Of Material Old Workable Bricks Etc. All Complete. , Road Delinator Delinealor Supply & Fixing Of M S Delineator Made Of L\Lild Steel With Pllre Polyester Powder Coating With The Minimum Thickness Of Powder Coating Of Not Less Than 40 Micron For Prolectlon Against Corlosion The Surface Should Be Concealed So That There Sholrld Not Be Any Exposed Surface Wilhout Powder Coating. Alternatively, These Metal Guide Poles Can Be Concealed With Thermoplastic Body. The Posts Shall Have Lan Ellipsoidal Or Circular Design Wilh The Height Of The Pole Shall Be 800 To 900 Mm Above The Ground With About 200 To 300 Mm Base Which Can Be Anchored Onto The Ground Mild Steel Guide Poles Shall Conform To Type Xl Sheeting Specifications As Per Lrc67 And Ast Ii D4956 Which Would Ensure To Obtainl Clear Visibility Of The Road Alignment During Nighl Time. The Relro Reflective Sheeting Shall Be Tested For Acertificale Of Having The Sheeting Tested For Coefficienl Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Iiner Removal, Adhesion,Impact Resistance, Specular Gloss And Fungus Resislance, 3 Years Outdooa Weathering And Ils Having Passed These Tests Shall Be Obta Ned From Lnlernational/Government Laboratory / Lnslitute By The Manufacturer Of The Sheeinq And In Case The Cerliflcate Is Obtained From International Condition, It Should Also Be Obtained From Lndian Condillon Within 3 Years Of Launching Of Product By The Manufaclure In Abroad. Alternatively, A Certillcate Conforming To Astlvl Specification (D4956 09) On Adficial Accelerated Weatherlng Requirements From A Reputed Laboratory In Lndia Can Be Accepted providing Sionally. Ln Such A Siluation, The Employer / Clienl, If So Desires, Collld Seek For A Performance Guarantee Which Would Be Released Alter Receipt Of Certiflcate Meeting The Requ Rement Of Three Years Outdoor Wealhering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Report Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour. T&P, Transportation, Installation And Incidentals All Complete As Per D Recllon Of The Engineerincharge , Road Marking With Hot Applied Thermoplastic Compound With Reflectrosing Glass Beads On Bituminous Surface. Providing & Laying Of Hot Applied Thermoplastic Compound 2.5Mm Thick Including Reflecto Rising Glass Beads @ 250Gm/Sqm. Area, Thickness Of 2.5Mm Is Exclusive Of Surface Applied Glass, Beads As Per I.R.C. 35. The Finish Surface To Be Level Uniform And Free Form Steaks And Holes Composition Of Thermoplastic Material Shall Be As Per Table 800-3 Of Clause 803 Of Morth Including Cost Of Work As Per Direction E/Ic. (Chapter-28 Si.No.2) , Road Marking With Hot Appliod Ths.Moplastic Compound With Roflsctorlsing Glass Boads On Bituminous Surface. (Ropoated / Tranvers Bar) Providing And Laying Of Hot Applied Thermoplastic Compound 5 Mm Thick Lncludlng Reflectorising Glass Beads 0) 5Oo Gms Per Sqm Area, Thickness Of 5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35-2015 The Llnished Surface To Be Level, Uniform And Free From Streaks And Holes , 6M Span Over Head Cantilever Structure With 300 Dia M S One Vertical Post Supply, Fxing & Erection Of Built Up Canllever Structure 6 M Span Comprising Of One Verllcal Posts Of 6.00 I!4 Helght Made Up Of 300 Mm Nb Heavy Class Ms Pipe As Verllcal Member Welded With 10 Mm I\,4S Plate At Top & 12 Mm M S Plate At Bottom. The Horizontal Truss Shall Comprise Of 50 Mm Dia Heavy Class M.S. Pipe And 40 Mm Dia Heavy M S Pipe As Bracing & 10 Mm Ms Plate At Bottom For Llxing To Vertical Post As Per Structure Design & Drawing Wilh One Of Steel Primer And Two Coats Of Synthetic Enamel Planl. The Work Includes Constrlrction Of Reinforced Cement Concrete Foundation Of Size 0.90X0.90X1 50 M Of Required Depth As Per Site Conditlon For Built Up Structure Including Earlh Work In Excavation 100 Mm Thick Lean Concrete In 113:6 Cement Coarse Sand And 40 Mm Gauge Stone Ballast And Reinforced Cement Concrete M25 Grade Concrete Including Supply And Fixing Of 25 Mm Dia Foundalion Bolts 600 Mm Long As Per Provision Of Structure Design Includlng Cost Of Reinforcemenl & Shuttering. The Lateral Vertical Clearances And Complete. Nstallaton Work Shall Be As Per Relevanl Clauses Of Mort&H Speciflcation Section 8Oo And Irc 67 2012 Complete In All Respect The Raies Shall Include Cost Of Deslgn Fabricalion, Supply, Kansportalion, Local Shifting Erection Of Signage Skucture Using Crane, Inclusive Of All Taxes Etc. All T&P Machine, Malerial And Labour Requiled For Proper Completion Of Work As Per Direclion Of Engineer-Ln-Charge. , Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply And Flxing Of Raised Pavement Marker With Made Of Plastic Body Of Rpimi Road Stud Shall Be Moulded From Asa (Acrylic Styrene Acrylonitrile) Or Hips (High-Lmoact Polystyrene) Or Acryloniilrile Butadien Styrene (Abs) Or Any Oiher Suitable Malerial Approved By The Engineer. The Marker Shall Support A Load Of 13,635 Kg Tested In Accordance With Astm D4280.The Reflective Panels Shall Consist Of Number Of Lenses Containing Single Or Dual Prismatic Cubes Capable Of Providing Total Internal Reflection Of The Lighl Entring The Lens Face. Lenses Shall Be Mouled Of Methyl Melhecrylate Conforming Io Astm D78b Of Equivalent The Slop Or Retro-Reflecting Surface Shall Preferably Be 35+1-5 Degree To Base And The Area Of Each Relro _Reflecling Sllrface Shall Not Be Less Than 13.00 Sq.Cm The Marker Height Shall Not Be Less Lhan 10 Mm And Shall Nol Exceed 20 Mm & Width Shall Not Exceed 130 Mm. The Base Of The Marker Shall Be Flal Within 1.3 Mm All Road Studs Shall Be Legibly Marked Wilh The Name , Lrade Or Other Means Of Identification Of The Manufacture. Epoxy Lnslallations, Excess Adhesive Around The Edge Of The Malker, Excess Adheslve On The Pavemenl And Adhesive On The Exposed Surfaces Of The Markers Shall Be Immedialely Removed. The Contractor Shall Submit A Two Year Warranty For Sal Sfactory Lleld Peformance Including Stipulated Retro-Refleclance Of The Reflecting Panel , To The Engineer . Ln Addition A Two Year Warranty For Salisfactory Infield Perfonnance Of The Finished Road Marker Shall Also Be Given By Lhe Conlractor Who Carries Out The Work Of Fixing Of Reflective Road Ma*Ers. Ln Case The Markers Are Displaced , Damaged . Gel Worn Out Or Lose Their Reflectivity Compared Lo Stipulated Standards , The Contractor Would Be Reqlllred To Replace Allsuch Markers Within 15 Days Ofthe Inlimation From The Engineer. At His Own Cost The Rate Shall Include All Materlals, Labour, T&P, Transportalion, Insiallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. Rpm (Wilhout Shank) , Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply And Flxing Of Raised Pavement Marker With Made Of Plastic Body Of Rpimi Road Stud Shall Be Moulded From Asa (Acrylic Styrene Acrylonitrile) Or Hips (High-Lmoact Polystyrene) Or Acryloniilrile Butadien Styrene (Abs) Or Any Oiher Suitable Malerial Approved By The Engineer. The Marker Shall Support A Load Of 13,635 Kg Tested In Accordance With Astm D4280.The Reflective Panels Shall Consist Of Number Of Lenses Containing Single Or Dual Prismatic Cubes Capable Of Providing Total Internal Reflection Of The Lighl Entring The Lens Face. Lenses Shall Be Mouled Of Methyl Melhecrylate Conforming Io Astm D78b Of Equivalent The Slop Or Retro-Reflecting Surface Shall Preferably Be 35+1-5 Degree To Base And The Area Of Each Relro _Reflecling Sllrface Shall Not Be Less Than 13.00 Sq.Cm The Marker Height Shall Not Be Less Lhan 10 Mm And Shall Nol Exceed 20 Mm & Width Shall Not Exceed 130 Mm. The Base Of The Marker Shall Be Flal Within 1.3 Mm All Road Studs Shall Be Legibly Marked Wilh The Name , Lrade Or Other Means Of Identification Of The Manufacture. Epoxy Lnslallations, Excess Adhesive Around The Edge Of The Malker, Excess Adheslve On The Pavemenl And Adhesive On The Exposed Surfaces Of The Markers Shall Be Immedialely Removed. The Contractor Shall Submit A Two Year Warranty For Sal Sfactory Lleld Peformance Including Stipulated Retro-Refleclance Of The Reflecting Panel , To The Engineer . Ln Addition A Two Year Warranty For Salisfactory Infield Perfonnance Of The Finished Road Marker Shall Also Be Given By Lhe Conlractor Who Carries Out The Work Of Fixing Of Reflective Road Ma*Ers. Ln Case The Markers Are Displaced , Damaged . Gel Worn Out Or Lose Their Reflectivity Compared Lo Stipulated Standards , The Contractor Would Be Reqlllred To Replace Allsuch Markers Within 15 Days Ofthe Inlimation From The Engineer. At His Own Cost The Rate Shall Include All Materlals, Labour, T&P, Transportalion, Insiallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. Rpm (Wilh Shank) , Flexible Median Marksr As Per Irc 79:2019: Flexible Lmedian N4arker (Flv4nl) Should Be Used For Improving Medlan Visib Lity Dlrring Dark Hours. , Use Of L/Edian ]Varker Provides Safely Againsl Colision Happening Wilh Med Ans During N Ght Lime , Or Sevete Weather Flexib E L\.4Edian Markers Shall Be Provided With Fluorescenl Yellow Colour Retro-Refleci Ve Sheeting Type Xl As Per Irc:87. Flexible Lt4edian Lmarker Shall Be Ol Lough, High Impact Resistant, Lnieclion Molded, Lhermoplastic Body With Propery Of Flexibility Io Provide High Durabilityand U Shape Structure Having Rebound / Bollnce Back Properly. The Sheeting Shall Be Of Type Xl Conforming To Lrcl67 And Ii Should Be On Both The Faces Whereby Providing Maximum Refleclivity At L,Anger Distances With Adequate Durabllity. The Logo Of The Manufacturer Shall Be Embossed On Either Side Of The Body During The Lnjection Molding Process. Fi\4M Shall Be Fixed By A Combination Bf Epoxy Adhesive And Grouting/ Drilling On Concrete Medians Or Property Conslructed Solid Medians Heighl: The Marker Height Shall Be A Minimum Of 180 Mm Width 120 Mm & Body Thickness: 6.5 Mm. The Shanks Shall Not Be Less Lhan 20 Mm And Depth Shall Not Be Less Than 30 Mm Reflective Area: Shall Not Be Less Than G0 Cm Square . Proof Of Lhe Same Report Shall Be Uploaded Which Quollng Lender. The Body Of Fn,4[,4 Shall Bounce Back To Ils Origlnal Position Of Afier 750 Number Of Hits Using Pendulum Of 1.8 Kg Conforming 40 Astm D256 Adhesion Between The Body And Outer Casing Body Of Fmi\4 Shall With Stand 50 Kg I Tensile Loads Conforming To Astm D63b Method. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installation And Incidentals All Complete As Per Direclion Of The Engineer-Ln-Charge. , Painting Lines, Dashes, Arrows, Etc. On Roads Ln Two Coats On New Work Painting Lines, Dashes, Arows, Etc On Roads In Two Coats On New Work Wilh Ready Mixed Road Marking Paint Cinforming To Ls:164 On Bituminolls Surface, Including Cleaning The Sullace Of At Dirt, Dusi And Other Fore Gn Matte., Demarcation At Site And Trafllc Control . Over 10 Cm. In Width , Linear Dstinoator Systsm (Lds) Supply & Fixing Of Linear Delineator System (Lds) Panels Made Of Micro Prismatic Retro Reflective Sheeting Type Xl Duly Laminated On Thin Aluminium Foil To A Unique Corrugated Shape To Provide Retro Reflection Across Wide Range Of Observaiions And External Angles. Eatch Lds Panel Should Be Of Nominal Lenglh Of 33 Inch And Each Ridge Shall Be Approximately 0.34 Inch High Each Lds Panel Is To Be Firmly Fixed On Existing Concrete/Brick Work With 16 Nos Fastner/ Screw , Retro-Roflectivesheeting Type-Lv With 4 Mm Thick Acm Single Side Providing & Flxing Of Reflective Signs With A Corrosion Resistant 4 Mm Thick Wlth 0.4 To 0.5 Mm Both Side Aluminium Skin Aluminium Composite Panel Lace To Be Iully Covered With Hlgh Lntenslty Prlsmatic Sheetlng Type Lv As Per Irc-6712012 Relro Refleclive Sheeling With Back Frame Ms Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Elc Shollld Be As Per Morth Speciflcation No Bo1.3.7 .The Sheelng Shall Have A Pressure - Sensltive Adhesive Of The Aggressive - Tack Type Requiring No Heat , Solvent Other Preparation For Adhesion 10 A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer. The Acim (Aluminium Composite Materials) Shall Be Flxed On The Back Frame Nis Angle Wiih Riveting. Micro Prismalic Type Lv Retro Rellective Sheeting Conilrming 1O Astm 04956-09 Shall Be Pressure Lixed. The Retro Reflective Sheeting Shall Be Tested For A Cerlillcate Of Having The Sheeting Tesled For Coetllcient Of Retro Refleclion, Dayume Colour And Luminance, Shrinkage, Flexibilily, Liner Iemoval, Adhesion, Impact Resistance, Specular Gloss And Fungus Resistance, 3 Years Outdoor Weathering And Its Having Passed Lhese Lesls Shall Be Obtained From Lnlemational/Government Laboratory/ Lnstitute By The Manufacture. Of The Sheetng And In Case The Certiflcate Is Oblalned From International Condilion, T Should Also Be Obtained From Lndian Condilion Within 3 Years Of Launching Of Producl By The Manufactllre In Abroad. Alternalively, A Cerliilcate Conforming To Astm Specification (D 4956-09) On Artiilcial Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, Lhe Employer/Client, If So Desires, Could Seek For A Petlotrnance Guarantee Which Would Be Released After Receipt Of Certiflcate Meeting The Requirement Of Lhree Years Outdoor Wealhering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Repo.T Shall Be Uploaded Whlch Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Lransportation, Installation And Lncidentals All Complete As Per Direction Of The Eng Neer-In-Charge. , Retro-Reflectivesheeting Type Iv With 4 Mm Thjck Acm Double Side: Providing & Fixing Of Reflective Signs Wilh A Corrosion Resistant 4 Mm Lhlck With 0.4 To 0.5 Mm Both Side Aluminium Skin Alumlnium Composite Panel Face To Be Fully Covered With High Tntensity Prismaiic Sheeling Type Lv As Per Irc-67:2012 Retro Reflective Sheeting With Back Frame Ms Angle Of 35X35x5 Mm Legends Letters , Numerals And Borders Elc Should Be As Per Morth Specification No801.3.7 The Sheeting Shall Have A Pressure - Sensitive Adhesive Of The Aggressive - Tack Type Requiring No Heai, Solvent Olher Preparation For Adhesion To A Smooth Clean Surface, Ln A Manner Recommended By The Sheeling Manufacturer. The Acn,4 (Aluminium Cornposite L\,4Aterials) Shall Be Ilxed On The Back Frame Ms Angle With Nveling. Micro Prismatic Type Lv Retro Refleclive Sheeting Conflrming Io Astm D4956-09 Shall Be Pressure Llxed. The Reko Reflective Sheeling Shall Be Tesled For A Cedificate Of Having The Sheeting Tested For Coemcient Oi Reko Reflection, Daytime Colour And Luminance, Shrinkage Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Resislance, 3 Years Outdoor Weatherlng And Its Having Passed These Tests Shall Be Obtained From Lnternallonal/Government Laboratory/ Lnstitute By Lhe Manufacturer Of Lhe Sheeting And In Case The Certificale Is Oblained From International Condition It Should Also Be Obta Ned From Lndian Condilion Wilhin 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternatively, A Certilicate Conforming 10 Astm Speciflcatlon (0 4958-09) On Aatiflclal Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepled Provisionally. Ln Sllch A Situation, The Employer/Client If So Desires, Could Seek For A Performance Guarantee Which Would Be Released Afler Receipl Of Cerlillcate Meeting The Requirement Of Lhree Years Outdoor Weathering Of The Sheeling As Per Irc 67I2012 & Proof Of The Same Repofl Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installalion And Incidentals All Cornplete As Per Dlreclion Of The Engineer-In-Charge , Retro-Refle.Ctivesheeting Type-Xl With 4 Mm Thick Acm Single Side Providing & Fixing Of Reflective Signs Wilh A Corrosion Resistant 4 Mm Thick With 0.4 To 0.5 Mm Both Slde Aluminium Skin Alumlnium Composite Panel Face To Be Fully Covered With High Lntensity Prismatlc Sheeting Type Lv As Pet Irc-67:2012 Reko Reflective Sheeling With Back Frame L\,4S Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Etc Should Be As Per L\Lorth Specification No_ 801.3.7 The Sheeting Shal Have A Pressure - Sensitive Adhesive Of The Aggressive Tack Type Requiring No Heal Solvent Other Preparation For Adhesion To A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer. The Acm (Alllminium Composite L\,4Aterlals) Shall Be Fixed On The Back Frame Ms Angle With Riveting. Micro Prismatic Type Lv Retro Reflective Sheeung Conflrming To Astlvl D4956-09 Shall Be Pressure Fixed. The Relro Reflective Sheeting Shall Be Tested For A Cefiilicate Of Having The Sheeting Tested For Coeificient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Iungus Resistance. 3 Years Outdoor Weathering And Lts Having Passed These Tests Shall Be Obtained From Lnlernational/Government Laboraiory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cefiificate Ls Obtained From Lnternational Condition. It Should Also Be Oblalned From Lndian Condition Wilhin 3 Years Of Launching Of Producl By The Manufacture In Abroad. Alternatively, A Certificate Conforming To Astii Speciflcation (D 4S5b-09) On Adiflcial Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Prcvisionally. Ln Such A Siluation, The Employer/Client, If So Desires, Could Seek For A Performance Guaranlee Which Would Be Released After Receipt Of Certiflcate Meeting The Requirernent Of Three Years Outdoor Weathering Of Lhe Sheeting As Per Irc 67:2012 & Prooi Of The Same Reporl Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transpoftalion, Installation And Incldentals All Complete As Per Direction Oi The Engineer-Ln-Charge , Retro-Reflectlveshoeting Type-Xl With 4 Mm Thick Acm Double Side Providing & Rlxing Of Reflective Signs With A Colrosion Resistanl 4 Mm Thick With 0.4 To 0.5 Mm Both Side Aluminium Skin Aluminium Composite Panel Face Lo Be Iully Covered With High Lntensity Prismatic Sheeling Type Lv As Per Irc-67:2012 Relro Retlective Sheeting Wlth Back Frame Ms Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Etc Should Be As Per Morth Specification No_ Bo1.3.7 .The Sheeting Shall Have A Pressure - Sensilive Adhesive Of The Aggressive - Tack Type Requiring No Heat, Solvent Other Preparation For Adhesion Lo A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer, The Acn,4 (Aluminlum Composite Materlals) Shall Be Fixed On The Back Fiame Ms Angle With Riveting. Micro Prismalic Type Lv Retro Reflective Sheeting Conflrming To Astm D4956 09 Shall Be Pressure Fixed. The Relro Refleclive Sheeting Shall Be Tested For A Ce(Iilcate Of Having The Sheeting Tested For Coefllcient Of Retro Reflection, Daylime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Funqus Resistance. 3 Years Outdoor Weathering And Its Having Passed These Tests Shal Be Oblained From Lnternationa /Governmenl Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case Lhe Certillcate Ls Obtained From Internalional Condition, It Should Also Be Obtained From Lndian Condition Within 3 Years Of Launching Of Product By The Manufacture In Abroad Alternalively, A Ce(Iilcate Conforming To Astm Specification (D 4956-09) On Artiflcial Accelerated Wealhering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Sltuation, The Employer/Cllent, If So Deslres Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Cedillcate Meeling The Requirement Of Lhree Years Outdoor Weathering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Repo( Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transpo.Tation, Installation And Incidentals All Complete As Per Direction Of The Engineer-In-Charge , Bollard (Single Sido) Supply & Fixing Of Bollard Made(Single Side) Out Of2mm Thick Aluminium Sheet Face Lo Be Covered With High Intensity Prismatic Grade Type Lv Sheeting , Legends , Letters , Numerals And Borders Etc Should Be As Per Morth Specillcation No-801.3.7 . Welded Poly Shaped To Make It Monolithic Pillar Size 12Oo Mm High Bollard Is Having A Frame 900X600 Mm And 600 Mm Dia For Fixation Made Out Of 35 X 35 X 5 Mm Angle Iron And From Side Is Fully Cover (Size Of Foundation 0.45X0.45X0.60M) , Bollard (Doublo Side) Supply 8, Fixing Of Bollad Made (Double Side) Out Of 2Mm Thick Aluminium Sheet Face To Be Covered With High Intensity Prismatic Grade Iype Lv Sheeting Legends , Letters , Numerals And Borders Etc Should Be As Per Morih Specification No-801.3.7. Welded Poly Shaped To Make It Monolithic Pillar Size 1200 Mm High Bollard Is Having A Frame 900X600 Mm And 600 Mm Dia For Fixation Made Out Of 35 X 35 X 5 Mm Angle Iron And From Side Ls Fully Cover. (Size Of Foundalion 0.45X0.45X0.60M) , Solar Power Road Marker (Solar Studs) The Solar Studs Shalt Be Made Of Aluminium Alloy And Poly Carbonate Material Which Shall Be Absolutely Weather Resistant And Strong Enough To Support A Load Of 13,635 Kg Tested In Accordance With Ast[4 D4280. Lts Co]Our May Be While . Red , Yellow , Green Or Blue Or Combination As Directed By The Engineer . Its Water Resislance Shall Meet Lhe Requiremenls Of Lp 65 In Accordance Wilh 15:12063:1987 Category 2 For Protection Againsl Water Ingress The Dimensions Of Solar Sluds Shall Not Be Less Than 100 Mm X 100 Mm X 10 Mm Ltshall Have Super Bright Leds So As To Provide Long Visibillty From A Distance Of More Than B0o M. Lts Flashing Rate Shall Not Be Less Than1 Hz Lts Should Be Able To Glve The Prescribed Performance In The Temperrature Range Of - 40C To +55C Lts Life Shall Be Not Less Than 3 Years. The Rate Shall Include All Materials, Labour, Equipments, Fabrication, Transportation, Erecuon, Installation And Incidentals All Complete As Per Direclion Of The Englneer-In-Charge , Cast-Ln-Situ Cement Concreto M 20 Kerb Construction Of Cement Concrete Kerb With Top And Bottom Width 115 And 165 Mm Respectively, 250 Mm High In M 20 Grade Plain Cement Concrete On M-10 Grade Foundation 150 Mm Thick, Foundation Having 50 Mm Projection Beyond Kerb Stone, Kerb Stone Laid With Kerb Laying Machine, Foundation Concrete Tad Manually, Alt Complete As Per Clause 408. , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 90 Cm Equllateral Tringle With Dif,Lnitation Plate Size (20Cm X 60Cm , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm Eqlrilateral Trinqle With Difflnitation Plate (20Cm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm Circular With Difflnltation Plale (20Cm X 60Cm) . , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government B0 Mm X 60 Mm Reclangu annual repair With Difllnitation Plate (20Cm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Mm X 45 Mm Rectangular With Difllnitation Plale (2Ocm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm X 60 Cm Square With Difflnitation Plate (20Cm X 60Crn) , Direction And Place Identification Signs Up To 0.90 Sqm Size Board Providing And Erecting Directlon And Place Identification Retro Reflectorised S Gn As Per Irc-67 Made Of High Intensily G.Ade Sheeting The Relro Reflective Sheelng Shall Be Tested For A Certiicate Of Having The Sheeling Tested For Coefficient Of Reko Reflection. Daytime Colour And Luminance, Shrinkage, Flexibllity. Liner Removal Adhesion, Impacl Resislance, Specula. Gloss And Iungus Resistance, 3 Years Ouldoor Weathering And Its Having Passed These Tesls Shall Be Obtalned From Lnternational/Govemment Laboraiory/ Lnslitule By The Manufacturer Of The Sheeting And In Case The Certillcate Is Obtained From International Condition, It Should Also Be Obtained From Lndian Condltion Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternatively, A Certiflcate Confonning To Ast[4 Specification (D4956 09) On Art Ficial Ccelerated Wealhering Requirements Faom A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer I Client, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Lhree Years Olrtdoor Weathering Of Lhe Sheeting As Per Irc 67 2012. Legends , Letters , Nurrerals And Borders Etc Should Be As Per Imorth Speciilcation No-801.3.7 Sheet Fixed Over Aluminium Sheetinq .2 Mm Thick Wilh Area Not Exceeding 0.9 Sqm.Supported On A Mild Steel Single Angle Iron Post 75X75x6 Mm Flrmly Fixed Lo The Ground By Rneans Of Property Designed Foundalion With N,4-15 Grade Cement Concrete 45X45x60 Cm.,Below Ground Lcvcl As Pcr Approvcd D.Awing. Complete. , Tree Plats Supply & Fixing Of Retro Reflective Tree Plate Having Size 15Cm X15cm, Conjisiing Type Xl Retro Reflective Sheeting Lixed Over 1.50 Mm Thick Aluminiu; Sh;Et Including Labour, Material T&P Etc For Proper Completion Of The Work. The Rate Shall Include All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 1000 Mm Helght , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 750 Mm Helght , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 500 Mm Helght , Aluminum-Backed Flexible Prismatic Sheeting Shall Be Made Of Yellow Colored Flexible Prismallc Sheeting With Non-Rnetallic Prismatc Lens Formed In A Lransparent, Synthelic Resin As Retro Leflective Elements. This Llexible Prlsmatic Sheeting Shall Have Black And Yellow Stripes With Aluminum Backed Flexible Prismatic Type Vl Sheeting Conforming To Astm: D4956 . Specifications And Standards Of Coefllcient Of Relro Refleclivity, Flexibility And Lmpact Resislance Applicable For Reboundable Devices This Flexible Prismatic Sheeting Shall Have Screen Printed Arrow/Slant Line Pattern In Black Colour In A Continuous Roll Format. Wldlh Of Object Marker Shall Be 300 Mm. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installation And Incidentals All Complete As Per Direclion Of The Engineer In-Charge , 2.40 M Span Over Head Cantilever Structure With 150 Die Ms One Vertical Post (Double Side Retro Reflective Sign Boards) Supply, Fixing & Eraction Of Built Up Cantilever Structure 240 M Span O.PiiIng Oi One Ve.Tical Posts Of 7 30 N4 Heighl Made Up Of 150 Mm Nb Medium Class T\4S Pipe As Vertical Memberwelded With 10 Mm Ms Plate At Top & Lo Mm Lvls Plate At Boltom. Flxing To Vertical Post As Per Structllre Design & Drawing Wiih One Of Steel Primer And Two Coats Of Synthetic Enamel Plant And The R;Tro Reflective Sheetinq Shall Be Tesled For A Certifcale Of Having The Sheeting Tested Fo. Coemcient Of Retro Reflection, Daylime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Resistance, 3 Years Olltdoor Wealhering And Ils Having Passed These Lests Shall Be Obtained From Lnternational/Government Laboraiory/ Lnstitute By The Manufactllrer Of The Sheeting And In Case The Certificate Is Obtained From Internatlonal Condilion, It Should Also Be Obtained From Lndian Condition Wilhin 3 Years Of Launchlng Of Product By The Manufacture In Abroad. Alternatively, A Cedificate Confonning Io Astm Speciflcation (0 4956 09) On Artificial Accelerated Weathering Reqllirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. N Such A Sltuation, The Employer / Client, If So Desiaes. Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerllllcate Meeting The Requirement Of Three Years Outdoor Weathering Ol Lne Sheeling As Pel Irc 67 2012 . Legenos . ,Etters . Numerdls And Borders Elc Sholllo Be Asperl\,4Orlh Specif,Calion No_801 37 The Work Includes Construction Of Reinforced Cement Concrete Foundation Of Size 0.60X0.60X1.20 M Of Required Depth As Per Site Condilion For Built Up Struclure Lncluding Earth Work In Excavation 100 Mm Thick Lean Concrete Ln 1:3:6 Cemenl Coarse Sand And 40 Mm Gauge Stone Ballast. Reinforced Cement Concrete Lm25 Includlng Supply And Fixing Of 25 Mm Dla Foundalion Bolts 600 Mm Long As Per Provision Of Slructure Design Including Cost Ot Reinforcement & Shuttering. The Lateral Vertical Clearances And Complete. Lnstallation Work Shall Be As Per Relevant Clauses Of Mort&H Specitlcation Seclion 800 And Irc 67 2012 Complete In A I Respect The Rates Shall Inclucle Cosl Ol Design Fabrication, Supply, Lransporlalion, Local Shifling Erection Of Signage Slructure Using Crane, Incluslve Of All Taxes Etc All T&P Machine, Material And Labout Required For Proper Completion Of Work As Per Direction Of Engineer-In-Charge , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 30X90 Cm (Lefrright) Object Hazard , Retro Rellectorisod Signs (Stajnless Steel Frame And Post With One Side Sings) Supply & Fixing Of Reflective Sign Board (Single Side) Of Size 1.50X1.20 M Retro Refleclive Sheeling Of Hip Grade Type-Lv, Lhe Board Shall Be Fixed On 50Mm Ss 304 Grade Pipe And Refleclive Sheet On 4 Mm Thick, Acm Sheel Of Standard Make As Per Morth Specificaton. The Board Shall Be Fixed Using 2 Man Post 45X45x60 Cm Cement Conclete Foundauon. The Stainless Steeljoint Welding Of Ss Pipe Work Shall Be Band And Grinder Property Including Bufflng So An To Give Uniiorm Shining At Weded Joinls. The Retro Reflective Sheellng Shall Be Lested For A Certiflcate Of Having Ihe Sheeting Tested For Coefficienl Of Retro Reflection, Daytime Cololrr And Luminance, Shrinkage, Flexibility, Linet Removal, Adheslon, Impact Resistance, Specular Qloss And Fungus Resistance, 3 Years Outdoor Weathering And Its Having Passed These Tests Shall Be Obtained From Lnternational/Governmenl Laboratory/ Institute By Lhe Manufacturer Of The Sheeting And Ln Case The Cedillcate Is Obtained From Inlernational Condition, It Should Also Be Oblained From Lndian Condition Within 3 Years Of Launching Of Procluct By The Manufacture In Abroad Allernatively. A Certiflcate Confolrnlng To Astm Specilicalion (D 4956-09) On Artiflcial Acceleraled Weathenng Requirements From A Reputed Laboratory Ln Lndia Can Be Accepled Provislonally. Ln Slrch A Situation, The Employer / Clienl, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Certificale Meeting The Requirement Of Three Years Ouldoor Weathering Of The Sheeting As Per Irc 67I2012. Legends , Letters , Numerals And Borders Elc Should Be As Per Morth Specification No-801.3.7 . Proof Of The Same In Form Of Governmenl Repod Shall Be Uploaded While Quoting Tender. , Retro Reflectorised Signs (Stainless Steel Frame And Post With Both Side Sings) Slrpply & Fixing Of Reflecllve Sign Board (Sing E Side) Of Size 1.50X1.20 M Retro Reflective Sheeting Of Hip Grade Type-Lv, The Board Shall Be Fixed On 50Mm Ss 304 Grade Pipe And Refleclive Sheet On 4 Mm Thick Acni Sheet Of Standard Make As Per Morth Speciilcaton. The Board Shall Be Fixed Using 2 Man Post 45X45x60 Crn Cement Concrele Foundation The Stainless Steelioint Welding Of Ss Pipe Work Shallbe Band And Grinder Propefiy Including Butting So An To Give Uniform Shining At Weded Joints. The Relro Reflective Sheeting Sha I Be Tested For A Certificale Of Having The Sheeling Tested For Coefficient Of Retro Reflection Daytime Colour And Luminance, Shrinkage. Flexibiity, Llner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Reslstance, 3 Years Outdoor Weathering And Its Having Passed These Tests Shall Be Obtained From Lnternational/Government Laboratory/ Lnstitute By Lhe Manufacturer Of Lhe Sheeling And Ln Case The Certiflcate Is Obtained Lrom Lnternational Condition, It Should Also Be Obtained From Lndian Condition Wlthin 3 Years Of Launching Of Product By The Manufacture In Abroad. Allernatively, A Cerlificate Conforming To Astm Specificalion (0 4956.09) On Artificial Accelerated Weathering Requlremenls From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Clienl, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Certificate Meeting The Requirement Of Three Years Outdoor Weather Ng Of The Sheeting As Per Irc 67I2012. Legends. Letters, Numerals And Borders Etc Should Be As Per Morth Specification No-801.3.7 . Proof Of The Same In Form Of Government Report Shall Be Uploaded Whlle Quoting Lender. , Type - A, W : Metal Beam Crash Barrier Providing And Erecting A W Metal Beam Crash Barrler Comprlsing Of 3 Mm Lhick Coffugated Sheet Melal Beam Ral 70 Cm Above Road/Ground Level Flxed On Ismc Series Channel Vertical Posl, 150 X 75 X 5 Mm Spaced 2 M Centre To Centre, 1.8 M High. 1.1 M Below Grolnd/Road Level, All Steel Parts And Fltments To Be Galvanised By Hot Dip Process, All Fltlings To Conform To Lsi1367 And 15:1364. Metal Beam Rail To Be Fixed On The Vedical Post With A Spacer Of Channel Section 150 X 75 X 5 Mm, 330 Mm Long Complete As Per Clause 810 , Type - B, Thrie : Metal Beam Crash Barrier Providing And Erecting A Thrie Metal Beam Crash Barrier Comprising Of 3 Mm Thick Corrugated Sheet Melal Beam Rail,85 Cm Above Road/Ground Level, Fixed On Isi\Ic Series Channel Vertical Post, 150 X 75 X 5 Mm Spaced 2 M Cenlre To Cenke, 2 M High With 1.15 M Below Ground Level, All Steel Parts And Fltments To Be Galvanised By Hot Dip Process, All Fittings To Conform Lo Lsl1367 And Ls:1364 Metal Beam Rail 10 Be Fixed On The Verlical Post With A Space Of Channel Seclion 150 X 75 X 5 Mm, 546 Mm Long Complete As Per Clause 810 , Anti-Termite Treatment The Soil Along With External Perimeter Of Building At The Rate Of 2.5 Litres Of Emulsion Per Square Metre Of The Perimeter Wall {Chapter No.08 Si.No.5} , Anti-Termite Treatment Of The Bottom And Sides Of Excavation At The Rate Of 5Litres Of Emulsion Per Square Metre Of Surface Area {Chapter No.08 Si.No.1} , Anti-Termite Treatment Of The Top Surface Of Filled Earth At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface{Chapter No.08 Si.No.3} , Anti-Termite Treatment Of The Soil Under Plinth Protection At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface {Chapter No.08 Si.No.4} , Anti-Termite Treatment Of The Backfill In Contact With Foundation At The Rate Of 7.5 Litres Of Emulsion Per Square Metre Of Vertical Surface (Area Of The Sub Structure In Contact With Backfill To Be Measured) {Chapter No.08 Si.No.2} , Treatment Of Existing Masonry Using Chemical Emulsion @ One Litre Per Hole At 300 Mm Interval Including Drilling Holes At 45 Degree And Plugging Them With Cement Mortar 1:2 (1 Cement :2 Coarse Sand) To The Full Depth Of The Hole : With Chlorpyriphos/Lindane E.C. 20% With 1% Concentration {Chapter No.08 Si.No.6-2.35.4.1} , Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 2Oo/O With 1% Concentration {Chapter No.08 Si.No.6-2.35.3.1} , Providing And Stacking 22.40-53Mm Guage Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Etc All Complete.(Ns) , Supply And Laying Stone Dust Etc All Complete. , Consolidation/Compaction Of Stone Ballast 10Cm Thick (Loose) Coat Including Repairing Of Patches Picking Up To Old Surface Spreading, Ballast Making Medhies To Retain Water And Carriage Of Metal Upto 30M Carriage Of Water Upto 200M Maintenance Of Barriers And All Labour T&P Including Road Roller Charges Etc. Required For Proper Completion Of Work The Stone Ballast Is To Be Supplied To The Contractor Free Of Cost At Site. , Scarifying The Existing Bituminous Road Surface To A Depth Of 150 Mm And Disposal Of Scarified Material With A Lift Upto 3 M And Lead Upto 1000 M As Per Technical Specification Clause 301.4 {Chapter No.20 Si No.16} , Providing And Applying Primer Coat With Ss1 Grade Bitumen Emulsion On Prepared Surface Of Granular Base Including Clearing Of Road Surface And Spraying Primer At The Rate Of 0.70 Kg/Sqm Using Mechanical Means. (As Per Attached Analysis) , Providing And Laying Dense Graded Bituminous Macadam With Higher Capacity Batch Type Hmp Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder @ 4.5 Per Cent By Weight Of Total Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification Clause No. 505 Complete In All Respects Including Cost Of All Materials, T&P, Labour, Cartage For Proper Completion Of Work As Per Direction Of Enginee-In-Charges. (20-Chapter Analysis Rate) , Providing & Applying Tack Coat With Bitumen Vg-10 Using Bitumen Pressure Distributor At The Rate Of 0.30Kg/Sqm. On The Prepared Primed Granular/Old Painted Surface. Cleaned With Air Compressor. Including All Taxes, Material, Labour, T&P Etc Required For Proper Completion Of The Work. (For Bituminous Surface). (Chapter No.20 Si No.9) , Providing And Laying Bituminous Concrete (Grading-Ii) With 100-120 Tph Hot Mix Plant Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder Vg-30 As Per Approved Job Mix Formula Which Ever Is Higher Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification 5Th Revision Clause No. 509 Complete In All Respects Including Cost Of All Materials, T&P, Labour, Cartage For Proper Completion Of Work As Per Direction Of Enginee-In-Charges. (20-Chapter Analysis Rate) , S/L/J Of 20Mm Dia Pvc Cunduct Pipe Etc. All Complete. , Making Of Nala Bandha With Sand Bags. With Local Sand Including Etc. All Complete. (Atached Per Annalysis Rate). , Providing Of Nala Bandha For Diversion Of Nala Etc All Complete.(Ns) , Scraping Of Max Phalt Road Including Disposal Of All Scraped Material To A Distance Of 30Mtrs (100 Ft) As Directed By Engineer-In-Charge C.P. & T&P.Etc. All Complete. {Chapter No.20 Si No. 772(A)} , Dismentling Existing Damage Plaster Including Disposal Of Refuse As Directed By E/Ic With In A Distance Of 60 Meters Etc. All Complete. {Chapter No. 17 S.I. No.16 (706)} , Supply And Fixing Of Light Fitting Switch Board. (None Sheduled) , Fixing Of Gate, Grill And Jali Etc. All Complete. (None Scheduled) , Supply & Fixing Of Wiring Sub Main. , Supply & Fixing Of Plug Point 15Mm. , Supply And Fixing Oxided Iron Fitting Etc. All Complete (None Scheduled) , Supply/Fixing Of 16 Mm Pvc Pipe Adopter Suitable For Item No. , Supply/Fixing Of 20 Mm Cvc Pipe Adopter Suitable For Item No. , Supply & Fixing Of 27Watt. Cfl Etc. All Complete. , Supply And Fixing Cat Eye Including Supply Of All Material, Loabour, T&P Etc. All Complete. (Chapter No.28 Si.No.5B) , Supply And Fixing Wiring Of Light Point. (None Sheduled) , Making Connection Of Drain Of Sewer Line With Existing Man Hole Including Breaking Into And Making Good The Walls, Floors With Cement Concrete 1:2:4 Cement Plastered On Both Side With Cement Mortar 1:3 Finished With A Floating Coat Of Neat Cement And Making Necessary Channels With Cement Concrete 1:2:4 For The Drain Etc. All Complete. (Chapter No.25 Si.No.9) , Cement Concrete Flooring 1:2:4 ( 1 Cement : 2 Course Sand : 4 Graded Stone Of Size 20 Mm Nominal Size) Laid In One Layer Finished With A Floating Coat Of Neat Cement (40 Mm Thick Floor). (Si No. 665), Nbo 14.71) , Providing And Fixing Of Foot Steps Etc All Complete. (Ns) On Market Rate , Providlng And Fixing C.P. Brass Bib Cock Of Approved Quality Conforming To Ls:8931.15 Mm Nominal Bore , Supply & Fixing Of C.P. Brass Stop Cock (Conceled) Of Standerd Design Of Approve Quality Etc. All Complete. (Chapter No.21 Si.No.44) , Providing And Fixing Close Timbering In Trenches On Both Side & All Complete. (A) 0.00 To 3.00 M. (None Scheduled) , Providing And Fixing C.P. Brass Stop Cock (Concealed) Of Standard Design And Of Approved Make Conforming To Ls:8931..15 Mm Nominal Bore , Fixing Window Chowkhats In Existing Opening Including Embedding Chowkhats In Floors Or Walls Cutting Masonry For Holdfasts, Embedding Hold Fasts In Cement Concrete Blocks Of Size 15X10x10 Cm With Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 20 Mm Nominal Size), Painting Two Coats Of Approved Wood Preservative To Sides Of Chowkhats And Making Good The Damages To Walls And Floors As Required Complete, Including Disposal Of Rubbish To The Dumping Ground, All Complete As Per Direction Of Engineer-In- Charge. (Chapter No.9 Si.No.7A-14.2.1) , Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Ls Standards And Weighing Not Less Than 690 Qms.15 Mm Nominal Bore , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 75Mm Diameter. (Chapter No.23 Si.No. 32(Ii)) , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 110Mm Diameter. (Chapter No.23 Si.No. 32(Iii)) , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 140Mm Diameter. (Chapter No.23 Si.No. 32(Iv)) , Rectangular Shape 1500X450 Mm Mirror With Plastic Moulded Frame. (Chapter No.22 Si.No.77) , Making Ornamental 2D Painting With Special Design Make By Specialist Painter Laying Of Two Coat Birla White Putty And Design By Asian Paint Including All Material Etc. All Complete. (Nn Approved) , Providing Of 8Hp Desel Pump Set For Dewatering Including Hire And Fuel Charge With Operator Etc. All Complete. (None Scheduled) , Fixing Door Chowkhats In Existing Opening Including Embedding Chowkhats In Floors Or Walls Cutting Masonry For Holdfasts, Embedding Hold Fasts In Cement Concrete Blocks Of Size 15X10x10 Cm With Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 20 Mm Nominal Size), Painting Two Coats Of Approved Wood Preservative To Sides Of Chowkhats And Making Good The Damages To Walls And Floors As Required Complete, Including Disposal Of Rubbish To The Dumping Ground, All Complete As Per Direction Of Engineer-In- Charge. (Chapter No.9 Si.No.7A-14.2.1) , Supply And Fixing 6Mm (1/4) Thick Chine White Glazed Tiles In Flooring Or Dado Laid With 1:3 Cement And Approved Coarse Sand Mortar And Approved Coarse Sand Mortar Finished With White Cement Jointed And Polishing Complete Including Supply Of All Materials, Labor For Porper Completion Of The Work. (Chapter No.14 S.I. No. 628) , Supply & Fixing Of Pre-Cast M-30 Cement Concrete Grass Paver (Rubber Molded Coloured) Over 40Mm Thick Local Sand Bed, With 3Mm Thick Joints Filled With Local Sand Including Leveling, Tempering And Sweeping Etc., Interlocking Bricks Will Be As Description Given In Direction Issued By The Ircsc-03-2004 And Should Be Isi Marked All Complete. 80Mm Thick, Strength Should Not Less Than M-30. (Tiles I Shape Decided By Engineer-In-Charge With Isi Mark) {Chapter No.20 Si.No.17F) , Repairing Of Leakage And Damege Pipe Line Etc All Complete.(Ns) , Lettering & Painting Of Wall Etc. All Complete. , Red Sand Stone Work For Wall Lining Etc. (Veneer Work) 30Mm Thick In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Camping Jointing In White Cemnet Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching Complete. (Chapter No.18 Si.No.1 New) , Providing And Fixing White Vitreous China Wash Basin Size 630X450mm With Pair Of 15Mm C.P. Brass Pillar Taps Including Etc. All Complete. (Chapter No.24 S.I. No. 3(A)) , Cleaning Of The Site For Workable Etc. All Complete. (Non Scheduled) , Providing Of 32Hp Desel Pump Set For Dewatering Including Hire And Fuel Charge With Operator Etc. All Complete. (None Scheduled) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 1200X600x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 900X450x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 600X450x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 900X450x100mm Etc All Complete. (As Per Market Rate) , Fixing Of Reinforced Cement Concrete Slab Etc All Complete. (Ns) , Raising & Re-Fixing Of Manhole Including All Material Labor T&P Etc. All Complete. (Non Scheduled) , Supply & Fixing Reinforced Cement Concrete Menhole Cover Heavy Duty Size Etc. All Complete. (Non Scheduled) , Providing Laying Spreeding And Compacting 45-90Mm Stone Agreegate For W.M.M. Specification Etc. All Complete. (None Scheduled) , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Liter Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, Manually Controlled Device (Handle Lever) Conforming To Is: 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Wall And Floors Wherever Required : White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With With Integral Type Foot Rests. (Chapter No.24 Si. No.1) , Providing Of 3D Ornamental Wall Art Painting By Architect & Special Painter Including Scrapping Of Wall And Two Coat White Putting White Putty One Coat Primer All Labour Scaffolding Work & Labour T&P Etc. Painting By Asian Special Paint Etc. All Complete. (Rate Mr As Smart City, Agra) , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam (22.40-53Mm) Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With 3 Wheeled Steel/ Vibratory Roller In Stages To Proper Grade And Camber, Applying And Brooming Requisite Type Of Screening/ Binding Materials To Fill Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density. , Providing & Laying 5Cm. Thick B.M. Laying By Paver Finisher Bitumen Of The @3.4%Kg By Weight And Stone Grit Etc. All Complete. (20-Chapter Analysis Rate) , Providing & Laying 2.5Cm. Thick S.D.B.C. Laying By Paver Finisher Bitumen Of The 5% By Weight Etc. All Complete. (20-Chapter Analysis Rate) , Supply & Fixing M/S Iron Work Display Board Including Painting, Lettering Etc. All Complete. (None Schedule) , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350mm With White Pvc Automatic Flushing Cistern, With Fittings, Standared Size C.P. Brass Flush Pipe, Spreaders With Union And Clamps (All In C.P. Brass) With Waste Fitting As Per Is: 2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fitting And Cutting And Making Good Thg Walls And Floors Whereever Required: Single Half Stall Urinal With 5 Litre Pvc. Automatic Flushing Cistern. (Chapter No.24 Si.No.4A) , Supply And Fixing Of Precast Reinforced Reinforced Cement Concrete Benches (Pfrc) Ornamental Benches With 02 Year Warranty Etc All Complete. (None Scheduled) , S/L/F Supply Of 1000Mm Dia Np-3 Reinforced Cement Concrete Hume Pipe In Proper Position As Directed By E/I Including Catage Of Pipes Collars Upto 30M Distance Etc All Complete. (Chapter No.1 Si.No.31(E) ) , Reinforced Cement Concrete Work With Cement Approved Coarse Sand And 2Cm (3/4) Gauge Approved Stone Ballast In The Proportion 1:2:4 In Reinforced Cement Concrete Slab Excluding Supply Of Reinforcement And Its Bending But Including Its Fixing And Binding The Same With 24 Bwgi Binding Wire And Including Necessary Centring And Shuttering Etc. And Also Including Supply Of All Materials Labor And Tools And Plants Etc. Required For Proper Completion Of The Work. Strength Of The Concrete Shall Not Be Less Than M-150. (5-Chapter S.I. No.-284) , Supply & Fixing Granite Stone Work Display Board (Size 2.50Ft X 4.00Ft) Including Painting, Lettering Etc. All Complete. (None Schedule) , Installation Of 1.50 H.P. Isi Marked Sumbercible Pump Etc All Complete. (Attache As Per Santion Annalysis) , Cost Of Septik Tank Attache As Per Estimate & Details. , Plain Glass Best Quality, Cut To Size 5Mm Thick , Providing And Fixing Designer Dustbin (Market As Per Catlog Code No. Db-03). , Supply Of Planting Of Trees Amaltas, Jaarul, Arjun Or Any Other As Per Architect Of Road Side 600X600 Dia Hole Meter Daging Road With One Years Maintenance. , Hdpe Pipes Pe100 Pn 06 Sdr 21 Dn 110Mm Is:4984:2016 (As Per Market Rate) , Hdpe Pipes Pe100 Pn 06 Sdr 21 Dn 160Mm Is:4984:2016 (As Per Market Rate) , Supply & Fixing Of Pre-Cast Reinforced Cement Concrete Drain Cover Different Size Etc All Complete. , Supply And Sowing Of Grass In Park Including One Year Mantinance Etc. All Complete. (None Scheduled) , Supplying And Stacking Of Good Earth At Site Including Royalty And Carriage Upto 8 Km Lead Complete (Earth Measure Dinstacks Will Be Reduced By 20% For Payment) .(Dar 2020 Hort-Basic Rates 2.2) Based , Supply And Fixing Of Light, Fitting Switch Board. (None Sheduled) , Supply And Fixing Of Chest Press Double. , Supply And Fixing Of Leg Press Double. , Supply And Fixing Of Triple Twister. , Supply And Fixing Of Shoulder Builder Double. , Supply And Fixing Of Air Walker. , Supply And Fixing Of Doublebar. , Supply And Fixing Of Rower. , Supply And Fixing Of Horse Rider. , Supply And Fixing Of Plastic Side With Iron Ladder 12 Feet Length. , Supply And Fixing Of See Saw Double Board Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Sliding With Swing Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Slide Ground Level Mgr Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Snack Climber Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Slide Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Nursery Combo Set Revolving Jhoola Etc All Complete. (None Scheduled) , Providing And Fixing Of Stainless Steel Water Cooler 4 Tap Etc. All Complete. (None Schedule) , Supply And Fixing Bansi Paharpur (Red/White) Bharra Sand Stone Fully Moulded, Engraved, Carved With Polishing And Dressing Including Clamp And Fashners Of Pillar Set With All Complete Work Etc. (None Schedule) , Supply & Fixing Of Rubber Moulded Cement Concrete Kerb Stone (Double Tapper) M-20 With Labour T&P Etc All Complete. , Supply And Installation And Jointing Of 500Mmx500mm Epdm Rubber Mat Flooring Of Thickness 24Mm Puling All Labour Material T&P Etc. All Complete (Rate As Per Jhs Jscl Mr). , Providing And Laying Autoclaved Aerated Cement Blocks Masonry With 150Mm/230Mm/300Mm Thick Aac Blocks In Super Structure Above Plinth Level Up T Floor Five Level With Reinforced Cement Concrete Band At Sill Level And Lintel Level With Approved Block Laying Polymer Modified Adhesive Mortar All Complete As Per Direction Of Engineer-In-Charge (The Payment Of Reinforced Cement Concrete Band And Reinforcement Shall Be Made For Separately). , Providing And Fixing Of Barricading Of 100Mm Average Ballies With In A Distance Of 1.50 Meter For 3 Rows Of 3Q. 3 Nosof Cross Ballies, Two Supporting Ballies Of 3 Meter Ballies And 2 Nos Perpendicular Ballies Tie With Moonj Rope Including Supply Of All Material Such As Ballies Rope T&P Required For Proper Completion Of Work And Also Including Labour Component (Material Will Be Property Of Contractor After Dismantling). , Providing & Fixing Of Green/White Shade Multipurpose Net/Cotton Cloth Proper Completion Of Work Etc All Complete. (Ns) , Supply, Fixing And Installation Of Acrelic Led Letter In Hindi As Per Direction Of Engineer-In-Charge Etc. All Complete. , Supply And Fixing Of Ward Up Big As Per Attach Photograph & Analysis. , Supply And Fixing Of Ward Up Small As Per Attach Photograph & Analysis. , Supply And Fixing And Installation Of See Saw Double Board Jhoola Isi Marked As Per Direction Of Engineer-In-Charge Etc. All Complete As Per Attach Photograph & Analysis. , Supply And Fixing Of Cast Iron Banches As Per Attach Photograph And Analysis And Direction Of Engineer-Incharge Etc. All Complete. , Complete De-Silting And Cleaning Of All Types Of Sewer Lines By Using Super Suction Machine And Taking Out Of Cebris/Silt Etc Including Safe Disposal Of Silt As Directed By The Deptt. Including Cost Of All Consumble Likes Disel Oil, Water Ret Provision Of Diversion Of Line If Required With The Help Of Sewage Pumps, Poser Backup From Gene Sets For Running Of Pumps. Night Lighting Etc Barricades Display Of Entire Operation Along With Sadequate Safely Equipments Must Be Used By Sewer Workers Size Fo Sewer Line To Be Desilted As Detail Above 1000Mm Dia. , providing and laying Gsb With Graded Stone Ballast With Stone Grit Size Stone Ballast With Hand Ramming Watering Including All Material Labor T&P Etc.All Complete (Ns) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , Providing & Laying Of Polythene Etc. All Complete. , Supply & Fixing Of Factory Wired Intergal Led Flood Light Luminaries With Die Cast Aluminum Housing Built With Driver Set Suitable For 140W. To 150W. Confirming To Ip 65 Protection Complete In All Respect. Cat Aaa ( S.I No. 1454 Pwd Schedule 2018) , Providing, Laying, Spreading And Compacting Stone Aggregates 45-63Mm Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Ro Ling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screen Ing/Bindin G Materials To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405. (Labour , A Pre-Laminated Sheet, Often Referred To As A Prelam Sheet, Is An Engineered Myka Wood Work Product Where A Decorative Layer, Like Laminate Or Veneer, Is Pre-Attached To A Core Material Like Particleboard Or Mdf. These Sheets Offer A Durable And Aesthetically Pleasing Surface For Furniture, Interior Design, And Construction.(None Scheduled) , Same Is Ltme No-1 & Extra For Providing Lipping With 2Nd Class Teak Wood Battens 25 Mm Minimum Depth On All Edges Of Flush Door Shutters (Over All Area Of Door Shutter To Be Measured) , Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 2Oo/O With 1% Concentration (Chapter No.8 Sr.No.6.1) , Supply And Fixing Of Advertisement Sign Board Size 4X3 As Per Direction Of Engineer-In-Charge Etc. All Complete , Supply Of Planting Of Trees Washington Palm, Amaltas, Cycus Revoluta, Ficus Benjamina Or Any Other As Per Architect Of Road Side 600X600 Dia Hole Meter Daging Road With One Years Maintenance. , Providing Of Rain Water Harvesting Drawing And Analysis Etc. All Complete (Details Attached). , Supply, Fixing And Installation Of Acrelic Led Letter In Hindi As Per Direction Of Engineer-In-Charge Etc. All Complete. , Drilling Of 200Mm Dia T/W Bore Suitable For 110Mm Dia Pipe All Complete With Labour T/P As Per Direction Of Engineer-In-Charge. , Suppply And Lowering Of 110Mm Dia 6 Kg/Cm2 Pvc Pipe (Phenolex Or Apb By E/I) All Complete. (Isi Marked Only) , Supply And Pouring Of Pea Gravel Suitable For T/W Bore All Complete. As Per Direction Of E/I (If Required) , S/L Of 1.50 H.P. Submersible Pump Set 65 Mt Head. (Pluga, Crompton, Ksb Etc.) I.S.I. Marked Etc All Complte. (Water Filled Only) , Supply & Fixing Of 100Mm Pvc Pipe Adopter Suitable For Item No.2 , S/L Of 1.50 H.P. Submersible Motor Controlled Starter Pannel All Complete. Crompton Make. (I.S.I. Marked Only) , Supply/Fixing Of 25Mm Gate Valve All Complete. Approved Make. , Supply/Fixing 4Sq.Mm 3 Core Copper Cable All Complete. , S/L Of 40Mm Dia Red Screen Ashirbad Pvc Pipe All Complete. , Supply/Fixing Of M.S. Clamp Made With 65X6mm X600mm Long M.S. Streep Suitable For 110Mm Dia Pvc Pipe For Holding All Complete. , Supply/Fixing Of 40Mm Dia G.I. Pipe B-Class Complete With Labour Charge. (Including All G.I. Fitting) , Supply & Fixing Of 25Mm Cpvc Etc. All Complete. , Development Of Bore Till The Discharge Is Free From Turbidity Of Compression Including Labour, Required For Proper Completion Of Work. , Supply And Fixing Of Precast Readymade Boundry Wall Hieght 8 Feet Etc All Complete. (As Market Rate) , Useable Brick (A) Class M-L50 , Useable Brick (B) Class M-100 , Useable Brick(C ) Straiqht Over Brunt , (D) Tiles, Bull Nose Drip Course Brick , Brick Ballast (A) Brick Ballast 40Mm Qauge , Brick Ballast (B) Class-150 Brick Ballast 25Mm Gauge , Brick Ballast (C ) Brick - Bats Of O.B.B./150 Bb , Fiy Ash Brick (Specification/Strength Should Not Be Less Than Bricks - M-{50) 230Mmx1 10Mmx75mm , Aac Block Autoclaved Aerated Concrete Block (Aac Block) Conforming To Ls : 2185 - 2005 (Part-3) Including Loading, Cartage Upto Site, Unloading, Stacking And Including All Levies And Royalties If Any But Excludinq G.S.T , Stone Ballast (Khera Thakur Quarry Bharatpur Rajsthan) 45-90 Mm Guage Stone Ballast. , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 45-63 Mm Guage Stone Ballast. , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 22.4-53 Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 20Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 19Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) Crushed Stone Dust 2.36Mm & Below , Stone Dust , 13.20Mm Guage , 11.20Mm Guage , 6.7Mm Guage And Below , Stone Boulder (From Khera Thakur Quarry) (A) 25-40 Kq , Stone Boulder (From Khera Thakur Quarry) (B) 40-60 Kq , Stone Boulder (From Khera Thakur Quarry) (C) Stone Bricks Dressed , Grit {District Gwalior(Mp) Quarry}(Berja,Chandrapura, Turak Pura,Parsen,Sumerpada Padampur Kheria, Bhileti & Bilara) District Bhind (M.P.)(Pali, Dirman & Piparsana) , (A) 45-63 Mm Guage Stone Ballast. , (B) 22.4-53 Mm Guage Stone Ballast. , (C) 20-40 Mm Guage Stone Ballast. , (D) 20 Mm Guage Stone Ballast. , (E) 19 Mm Guage Stone Ballast. , (F) 16 Mm Guage Stone Ballast. , (G) 13.20 Mm Guage Stone Ballast. , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Coloured Rubber Moulded , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Coloured Rubber Moulded , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Coloured Rubber Moulded , Rubber Moulded Gement Concrete Kerb Stone M-20 12X12 X6 , Rubber Moulded Gement Concrete Kerb Stone M-20 12X12 X6 (Plain) , Rubber Moulded Gement Concrete Kerb Stone M-20 12X 16 X6 (Designer) , Rubber Moulded Gement Concrete Kerb Stone M-20 12X 18 X6 , Coarse Sand (Excluding Actual Bulkaqe) , Fine Sand (Excludinq Actual Bulkaqe) , (L) Local Sand , Cement (L) Portland Cement (J.P., A.C.C., Birla, J.K.) O.P.C , Cement (Ll) Cement (P.P.C.) , Cement (Lll) White Cement (J.K. Or Birla Brand) , Green Net(Chapter- 1 Sl.No 44) , Tractor Trolley With Driver Including P.O.L. (Chapter-2 Sl.No 25)
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 142
Uttar Pradesh View Result →
49.
Defence #11286957 Technical Bid
Tender for Sch A Part- I To Ix: Note: This Schedule Is Pre-Priced By Mes And The Rate Indicated As Under Col 5 Signifies This Fact Only , Total Amount Of Sch ‘A Part I (Building & Structures) , Total Amount Of Sch ‘A Part Ii (Site Clearance, Excavation & Earthwork ) , Total Amount Of Sch ‘A Part Iii (Cooling Appliances & Air-Conditioning) , Total Amount Of Sch ‘A Part Iv (Dg Set) , Total Amount Of Sch ‘A Part V (Internal Electric Supply) , Total Amount Of Sch ‘A Part Vi (Road / Path) , Total Amount Of Sch A Part-Vii (Area Drainage ) , Total Amount Of Sch A Part-Viii (External Water Supply) , Total Amount Of Sch A Part-Ix (External Electric Supply) , Schedule A Part-X (Misc B/R And E/M Works) Note: This Schedule Is Not Pre-Priced By Mes And The Rate Indicated As Rs 0.00 Under Col 6 Signifies This Fact Only. Bidders Shall Insert Their Rate In Column-7 For That Purpose. , S&F Voltage Stabilizer For Automatic Operation, Single Phase Naturally Air Cooled Indoor Type & Designed For Input Variation Between 170 V To 250 V With Output Voltage Stabilized At 230 V With Accuracy Of ± 2.5% And Of Capacity 2.0 Kva Complete All As Specified And As Directed By Engr-In- Charge. Makes :- Automatic Electrical (Ae)/ Vinitec/ Aplab/ V Guard , S&F Voltage Stabilizer For Automatic Operation, Single Phase Naturally Air Cooled Indoor Type & Designed For Input Variation Between 170 V To 250 V With Output Voltage Stabilized At 230 V With Accuracy Of ± 2.5% And Of Capacity 3.0 Kva Complete Suitable For Inverter Type Ac All As Specified And As Directed. Makes :- Automatic Electrical (Ae)/ Vinitec/ Aplab/ V Guard/ Volina , Supply, Install, Testing And Commissioning Of Silent Diesel Engine Generating Set, 100 Kva/80 Kw, 1500 Rpm, 3 Phase, 415 V, 50 Hz, Power Supply Alternator Along With Fuel Tank, Control Panel., Battery And Complete Set Installed In Sound Acoustic Enclosure And Standard Accessories And Fittings With Power Factor 0.8, Plain Cement Concrete Foundation Suitable For The Generator Set As Per Manufacturers Instructions Complete With Standard Accessories And Microprocessor Based Integrated Dg Set Controller With Coupled To Alternator Rated At 100Kva/80 Kw At 415 Volts, Set Mounted On Channel Iron Base Frame Complete With Sub-Base With Batteries, Avm Pads And Std Panel All As Per Guideline Of Latest Cpcb Iv+ Norms All As Specified And Directed And Comprising Of The Following: , Note For Item No. 11.30 (I) Engine: Engine With Direct Injection, Water Cooled, 3 Cylinders, In-Line,4 Strokes Rated At Developing 126.8 Bhp @ 1500 Rpm For Continuous Duty Of Suitable For 100 Kva Alternator With Provision Of 10% Over Load For One Hour In Every 12 Hour Running Confirming To Bs 5514/ Iso 3046 Standard Totally Enclosed As Per Oem Specification And Directed By Engr-In-Charge. The Engine Has The Following Specification:- A) Mechanical Fip B) Mechanical Governor C) Turbocharger, Exhaust Manifold, Stainless Steel Exhaust Flexible Connection D) Radiator Cooled, With After Cooled E) Plate Type Lube Oil Cooler F) Filters G) Lube Oil H) Dry Type Replaceable Paper Element Air Cleaner J) Flywheel Housing And Flywheel To Suit Single Bearing Alternator K) Starting Motor-Electric, Battery Charging Alternator L) First Fill Lube Oil And Coolant (Ii) Alternator: Brushless Alternator, Self -Excited, Self -Regulated, Floor Mounted With All And / Or Roller Bearings, Statically And Dynamically Balanced Screen Protected Acoustic Enclosure Confirming To Is 4722 / Is 13364, Ip-23 Protection With H Class Insulation Limited Temperature Rise Of Class H, Automatic Voltage Regulator From No Load To Full Load, Ammeter Capacity Of Delivery 100 Kva, 415 Volts, 3 Phase, 50 Hz And Lagging For Ac Supply And Will Be Suitable For Tropical Conditions All As Per Oem And Directed By Engr-In-Charge. (Iii) Instrument Panel : Engine Instrument Panel Consisting Of On/Off Starting Switch With Key Lubricating Oil Pressure Gauge, Water Temperature Gauge, Battery Charging Indicating Lamp, Hour Meter With Rpm Indicator, Safety Control Against High Temperature Of Water, Over Speed Stop With Double Driver Adopter As Per Oem Specification And Directed By Enge-In-Charge. (Iv) Other Fittings: (A) Battery Charger : Battery Charger Having Electric Circuit Consisting Of Rectifiers, Capacitors And Resistance Etc. The Battery Charger Should Be Able To Charge 12 Volts 88 Ah Battery At A Time (V) Dg Set Shall Be Supplied Along With Acoustic Original Enclosure Of The Manufactures Suitable For 100 Kva Dg Set And All Connecting Accessories As Per Latest Cpcb Iv+ Norms , (Vi) The Diesel Oil, Lub Oil Etc. For Smooth Functioning Of Dg Set During Ph-I & Ph-Il Complete Testing And Full Tank Filing Of Diesel Oil After Ph-I & Ph-Ii Testing, Topping Of Lub Oil Etc. Required For Commissioning And Testing Of Dg Set. (Vii) Amf Panel: - Supply Installing Commissioning & Testing In Microprocessor Based Amf Panel Board Factory Made, Out Door Type Ip-65, Cubical Type, Vermin Proof, Dust Proof, Water Proof Made Out Of 3.15 Mm Thick Crca Sheet And Angle Iron Frame Of Size 50X50x6 Mm Inside Depth Not Less Than 50 Cm And Size Suitable To Accommodate The Following Accessories With Insulated Tpn Copper Busbar Of Rating Not Less Than 1.5 Times The Rated Capacity Of The Incomer Mccb Suitable For 100Kva Dg Set. Hinged Door With Locking Arrangement Duly Painted With Coat Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Both Internally And Externally And Connecting With Cable With Lugs Including Internal Wiring With Copper Cable Of Suitable Size Using Lugs Compressing The Following Accessories All As Directed. (Notes : The Rate Quoted Shall Include For Earth Work & Excavation For Angle Iron Frame For Foundation Of Panel Board Upto 0.50 M Below Gl In Any Type Of Soil & Plain Cement Concrete (1:4:8), D2 Filling In Foundation The Ground Clearance Of Panel Board Shall Be 0.40 M Gl To The Bottom Of Panel Board ) And Copper Bus Bar 240 Amps Duly Colour Sleeved Mounted On Epoxy Insulators-01 Set. Note:(I) Amf Panel Suitable For 100 Kva Dg Set To Connect With Grid Shall Be Approved By Cpri And Certificate To Be Produced And To Be Submitted In The Office. The Amf Panel Has The Following Specification:- A) 160A, 4 Pole Contactor For Alternator With Thermal Over Load Relay B) 160A, 4 Pole Contactor For Mains C) Mcb For Short Circuit Protection D) Indication Led (Dg On, Load On Dg, Main On, Load On Main, Battery Charge On) E) Push Buttons (Engine Start/Stop, Generator Contactor Close/Trip, Main Contactor Close/Trip If Provided, Fault Accept/Reset) F) Voltmeter & Ammeter And Other Connecting Accessories And Safety Features For Successful Auto Operation Of 100 Kva Dg Set. (Viii) Excavation, Earthwork And Provn Of Plain Cement Concrete Plinth Of Suitable Sizes For Installation Of Dg Set & Connected Accessories Complete As Per Oem/ Site Requirements. , S&F Square Profile Led Lighting Fixture With Extruded Polycorbonate, Environmental Friendly, Energy Efficient Ready To Use Pack Led Tube Light Fitting 20 Watt With Led Light Source 6500K With Uniform Light Output, With All Accessories Including Its Connection Complete With All As Specified And Directed By Engineer-In-Charge. Make:Havells Led Pride Essential Cat No Lhexawp7un1w020 Or Equivalent Makes Cg/Philips/Wipro/Luker. , S&F Factory Made Powder Coated Sheet Metal Enclosure, Tpn Vertical Distribution Boards With Mccb As Incomer Ip43 Protection Double Door: Plain 6 Way With Suitable Rated Busbar, Neutral Link, And Mcb Sp/Tp As Outgoings Complete All As Specified And Directed. Note :Mccb And Mcbs Are Not Included In This Item And Paid Separately. , S&F Mccb 4 Pole, 415 V, Adjustable Type Thermal Magnetic Release, 125 Amps With Breaking Capacity 25 Ka And Making Connection With Suitable Size Of Copper Lugs Etc Complete All As Specified And As Directed. , Supply And Laying Double Walled Corrugated (Dwc) Hdpe Pipe Of Nominal Bore 110 Mm Including 90 Degree Bends With Coupler And Rubber Ring, Conforming To Is :16205 Part 24,450 N Laid In Trenches For Cable Protection Complete, All As Specified And As Directed , Supply And Laying Double Walled Corrugated (Dwc) Hdpe Pipe Of Nominal Bore 50 Mm Including 90 Degree Bends With Coupler And Rubber Ring, Conforming To Is :16205 Part 24,450 N Laid In Trenches For Cable Protection Complete, All As Specified And As Directed , M&L For Cutting Of Existing 40 Mm Dia Pipe For Inserting Tee Of Size 40X40x20 Mm Including Lead Joint And Excavation Etc Complete, All As Specified And As Directed , Supply, Install, Testing And Commissioning, Factory Made And Tested (Including Cpri Type Test Certified) Lt Panel Board Out Door Type, Floor Mounted, Compartmentalised And Ip-63 Suitable For 415 Volts 3 Phase 4 Wire, 50 Hz Ac Supply System, All As Specified And Directed, Having Bus Bar Chamber With Insulated Aluminium Bus Bars 250 Amps Rating Installed On Porcelain Insulators. The Panel Shall Be Dust And Vermin Proof, Made Of 3.15Mm Crca Ms Sheet And With Base Frame Of 50X50x6mm Angle Iron , Powder Coated, Front And Rear Opening Type With Aprons For Cable Entry With Double Door Shutter And Locking Arrangement With And Including Following Items. (Notes : The Rate Quoted Shall Include Earth Work & Excavation For Angle Iron Frame For Foundation Of Panel Board Upto 0.50 M Below Gl In Any Type Of Soil & Plain Cement Concrete (1:4:8), D2 Filling In Foundation The Ground Clearance Of Panel Board Shall Be 0.40 M Gl To The Bottom Of Panel Board ).Note: Panel Board Shall Be Approved By Cpri And Certificate To Be Produced And To Be Submitted In The Office. Incoming :- (A) Mccb 4 P, 415 Volt 160 Amps, 32Ka, 50 Hz With Fixed Thermal And Magnetic Setting -01 No Outgoing :- (B) Mccb 4 P, 415 Volt 125 Amps, 25Ka, 50 Hz -01 Nos. (C) Mccb 4 P, 415 Volt 63 Amps, 10 Ka, 50 Hz -02 Nos. (D) R,Y,B Indicators (E) Multifunction Digital Square Type Intelligent Panel Meter To Measure Voltage, Current, Frequency, & Power Factor - 01 No
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 13
Maharashtra View Result →
50.
Defence #11281747 Technical Bid
Tender For Provision Of Defi Md Accommodation At Kota Mil Stn; 1 Lump sum price worked out by the contractor for BUILDING WORKSas listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 2 Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 3 Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATIONas listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 4 Lump sum price worked out by the contractor for ROAD, PATH, CULVERT AND HARD STANDINGas listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 5 Lump sum price worked out by the contractor for SEWAGE DISPOSALas listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 6 Lump sum price worked out by the contractor for AREA DRAINAGE as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 7 Lump sum price worked out by the contractor for FENCINGas listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 8 Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLYas listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 9 Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATIONas listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 10 Lump sum price worked out by the contractor for LIGHTING PROTECTION as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 11 Lump sum price worked out by the contractor for FIRE FIGHTINGas listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 12 Lump sum price worked out by the contractor for LIFT WORKas listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 13 Lump sum price worked out by the contractor for HOT WATER SUPPLYas listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 14 Lump sum price worked out by the contractor for DG SETSas listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 15 Lump sum price worked out by the contractor for SITE CLEARANCE, SITE DEVELOPMENTAND EARTH WORKas listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 16 Sch A Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes:(i) This schedule is not pre-priced by MES and the pre-priced rate indicated as Rs 0.00 under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under SCH A PART-XVSITE CLEARANCE, SITE DEVELOPMENTAND EARTH WORK schedule). 17 INTERNAL WATER SUPPLYS&F for 15mm dia sink mixer (wall mounted) with 150mm long swivel spout,connecting legs and wall flangerswith complete accessories etc complete all as specified and directed.Make: CERA Cat Part No F2014511 / Hindware Cat Part No F690058 / Parryware Cat Part No G3335A1 or equivalent make as mentioned in Appx B. 18 S&F for 15mm dia single lever center hole basin mixerwith complete accessories etc complete all as specified and directed.Make: CERA Cat Part No F1015451 / Hindware Cat Part No F690012 / Parryware Cat Part No G4863A1 or equivalent make as mentioned in Appx B. 19 S&F for 15mm dia wall mixture with bend pipe for overhead showerwith complete accessories etc complete all as specified and directed.Make: CERA Cat Part No F2002401 / Hindware Cat Part No F330020 / Parryware Cat Part No G3316A1 or equivalent make as mentioned in Appx B. 20 INTERNAL ELECTRIFICATIONS&F ofmodular type 3 pin 20 A socket with SP MCB, conforming to IS 1293: 2005as specified in IS 732: 2019 etc complete all as specified and directed 21 S&F for modular type 1 module RJ-11 telephone socket with shutter etc complete all as specified and directed 22 S&F for modular type 1 module co-axial type TV socket etc complete all as specified and directed 23 S & F for 16 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 24 S & F for 25 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 25 S & F for 32 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 26 S & F for 40 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 27 S&F forSingle Phase Dual Source Pre Paid Meter, Class 1.0, RS485,10/60A Direct,with followingspecification as under : (i) Communication options:, RS485 and RF(ii)Three in one option:Integrate gas & waterupto 4 DI(iii) Programmable tariff for EB, DG and DI for automatic reduction of balance even server is offline(iv) Configurable Holidays,Happy hours to avoidload switching on Holidays/Night(v) Alarm notifications for low credit balance(vi) Eliminate tenantdisputes, meter tampering & manualtariff reading errors 28 S&F forThree Phase Dual Source Pre Paid Meter, Class 1.0, RS485, 5A CT operated,with followingspecification as under : (i) Communication options:, RS485 and RF(ii)Three in one option:Integrate gas & waterupto 4 DI(iii) Programmable tariff for EB, DG and DI for automatic reduction of balance even server is offline(iv) Configurable Holidays,Happy hours to avoidload switching on Holidays/Night(v) Alarm notifications for low credit balance(vi) Eliminate tenantdisputes, meter tampering & manualtariff reading errors 29 S&F of Sheet metal enclosure distribution board VTPN4 way, 415 voltdouble door powder coated, protection class IP-54 isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & MCCB DBs confirming to IS - 13032, IS-8623, BS EN60898 with min 200 Amp rating copper bus bar and grouting, fixing on wall with nut bolts washers proper with PCC works complete all as specified and directed 30 S&F of Sheet metal enclosure distribution board VTPN6 way, 415 voltdouble door powder coated, protection class IP-54 isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & MCCB DBs confirming to IS - 13032, IS-8623, BS EN60898 with min 200 Amp rating copper bus bar and grouting, fixing on wall with nut bolts washers proper with PCC works complete all as specified and directed 31 S&F of 160A, 4 pole moulded case circuit breaker (MCCB) with thermal magnetic trip unit (TMD), compression lug connectors, protection against overloads (Ir adjustable from 0.7- 1 X In), protection against short circuits (Isd adjustable from 5- 10 X Ir), inbuilt encapsulated double break roto active type instanteneous protection, earth fault leakage protection, etc. having Ics = 100% = Icu = 16 kA as per IEC 60947-2 and suitable for 3-Phase, 415 V, 50 Hz electric supply etc complete all as specified and directed by engineer-in-charge. 32 S&F for 12W LED Downlight having Luminous efficacy of > 100, input voltage range 140-270 V, input frequency 50-60 Hz etc complete all as specified and directed . 33 S&F for LED light fitting with high 10 watt 220 V AC decorative wall type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size etc complete all as specified and directed . 34 S&F for 10W LED bulk head light having Luminous efficacy of > 100, input voltage range 140-270 V, input frequency 50-60 Hz etc complete all as specified and directed. 35 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 600 mm sweep. Min air delivery 115 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) etc complete all as specified and directed by engineer-in-charge. 36 Supply and fix Wall Mounting Fan, steel body AC single Phase, 230V,With Sweep Size, 200mm ; Motor Speed 84CMM, 3 blades, and frame and louvers etc complete all as specified and directed by engineer-in-charge. 37 Supply, installation, testing and commissioning of factory made, indoor cubical compartmental type BUILDING PANEL (TTA) of suitable size for short circuit, temperature rise, protective earth short circuit test and dielectric tests of required ratings, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 42 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enameled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete as specified and directed by engineer-in-charge.The BUILDING PANEL shall comprise of the following:(A) Bus bar Chamber(i) 01 Set (3L + N) of copper busbar of rated capacity 400A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connections. 38 (B) Incoming:- (i)320A, 415 V, Ics = 100% Icu = 16 kA, 50 Hz 4P MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 01 No.(ii) Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 No.(iii) LED phase indicators (Red, Yellow, Blue)- 01 Set 39 (C) Outgoing:-(i)40A, 415 V, Ics = 100% Icu = 16 kA, 50 Hz 4P MCCB, conforming to IEC 60947-2, havingtrip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 08 Nos(ii) LED phase indicators (Red, Yellow, Blue)- 08 Sets 40 SEWAGE DISPOSALS&F for DWCPE (SN8) 180mm outer dia and 163 inner dia of pipe for depth 0.70mm to 1.65m, laid on 150 mm thick bed (1:4:8)with excavation in any type of soil including manholes/drop manhole of standard sizemade of brick mosonary /RCC/Precast RCC with SFRC ventilating cover and frame,includes all items and activities to execute and make sewer line functionaletc complete all as specified and directed. 41 S&F for DWCPE (SN8) 200mm outer dia and 175 inner dia of pipe for depth 0.70mm to 1.65m, laid on 150 mm thick bed (1:4:8) with excavation in any type of soil including manholes/drop manhole of standard sizemade of brick mosonary /RCC/Precast RCC with SFRC ventilating cover and frame,includes all items and activities to execute and make sewer line functionaletc complete all as specified and directed. 42 S&F for DWCPE (SN8) 300mm outer dia and 260 inner dia of pipe for depth 1.65mm to 2.3m, laid on 150 mm thick bed (1:4:8) with excavation in any type of soil including manholes/drop manhole of standard sizemade of brick mosonary /RCC/Precast RCC with SFRC ventilating cover and frame,includes all items and activities to execute and make sewer line functionaletc complete all as specified and directed. 43 Supply, lay, commissioning, jointing and testing ofcentrifugally cast (spun) ductile iron pipes of 150mm bore class K-7 with spigot and socket ends conforming to IS 8329/2000, IS: 12288 : 1987 code of practice for laying in trenches complete all as specified and directed.Note: The rate quoted by contractor are inclusive of all type of Joints. 44 S&F forNonclog submersible (sewage disposal), pump set, electric driven 415 Volts 3 Phase 50 Hz, supply comprising of pump with cast iron impellors, submersible motor of suitable capacity, coupling, at discharge 3360 to 480 LPM and minimum discharge should be less than 480 LPM at minimum head 14 m.including chain pully block of two MT capacity 01 Noandsuitable arrangement for hanging the motor through chain of requirement of delivery of pump connected to main pipe line by suitabe HDPE pipe of size 150mm Dia for required length with necessary connection etc all as specified and as directed. 45 Supply,installing, testingand commissioningout door type LT feeder piller box of suitable size 750X750X450 mm, pedestal mounted, CPRI type test totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15 mm thick CRCA sheet, framing with 50 x50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and paintedto both internal and External surfaces with powder coating paint in heatprocess of sheet and suitable for 415 volts, 50 Hz, 3 phase 4 wire system and comprising with and includingfollowing accessories and mounted on PCC Platform made out of100 mm thick PCC (1:3:6),0.45 Mtr all round the panel board etc complete with the following items :- 46 Incoming:- (i) Copper bus bar made up of copper strip100 amps duly mounted on bakelite insulatorssleevings of standard colour code - 01 Set. (04 No strips for Phases & Neutral)(ii) MCCB TPN 415 Volts,63 Amps, 50 Hz, breaking capacity 25 KA with fixed thermal & magnetic setting ( For Incomming ) - 01 No.Outgoing:-(i) MCB TP 415 volts 32 Amps, breaking capacity 16 KA with fixed thermal & magnetic setting ( For FPB2 ) - 03 Nos(2 nos for pump 1 nos for spare). (ii) FASD Starter for 15 HP Motor with single phase preventer, OLP and dry run protector- 02 Nos 47 (iii) Analogue type modular volt meterof range 0-500 volts -01 No(iv)Volt meter selector switch-01 No.(v) Analogue typeAmmeter of range 0-200 Amp-01 No(vi) Ammeter selector switch-01 No(set of three)(vii) Indicator lamp with integral circuit (230/240 volt) and cluster LED (Red, Orange, Blue) - 01 set(viii) CT 200/5 Amps - 3 Nos 48 Supply and FixingDI/CI special fittings of any size,type,radius angle,tapers increasing decreasing sockets,tees,tail piece and collars etc complete upto 200 mm dia etc complete all as specified and directed. 49 S&F forPVC insulated and sheathed 1100 volts grade flat type submersible 06 sqmm cable three core multi stranded conductor etc complete all as specified and directed . 50 M&L for Making drill hole by trenchless technologyof suitable size under road for laying pipe line of size150mm bore at 1 metre depth from the road level etc complete all as specified and directed.Note :- Drill hole (trenchless) shall be done without disturbing top surfaces of road by appropriate machine. 51 M&L for steel gate 5.45 m wide and 2.70 m height with RCC pillar including excavation in any type of soil, plastering, painting, etc complete all as specified and shown in TD/2008/101 sheet No 1/3 to 3/3 52 EXTERNAL WATER SUPPLY Supply, lay, commissioning, jointing and testing ofcentrifugally cast (spun) ductile iron pipes of 100mm bore class K-9 with spigot and socket ends conforming to IS 8329/2000, IS: 12288 : 1987 code of practice for laying in trenches complete all as specified and directed.Note: The rate quoted by contractor are inclusive of all type of Joints. 53 Supply, lay, commissioning, jointing and testing ofcentrifugally cast (spun) ductile iron pipes of 150mm bore class K-9 IS: 12288 : 1987 code of practice for laying in trenches complete all as specified and directed.Note: The rate quoted by contractor are inclusive of all type of Joints. 54 Supply and FixingDI/CI special fittings of any size,type,radius angle,tapers increasing decreasing sockets,tees,tail piece and collars etc complete upto 200 mm dia etc complete all as specified and directed. 55 Supply and fix CI foot valve with leather washer, ofsize 100 mm , lift and swing, single door, IS 4038 marked one with each pump suction line complete all as specified and directed. 56 M&L for construction of valve chamber of brick masonry from the top of surface with MS covers 3.15 mm thick and 40x40x6 mm MS angle with hinges for locking arrangement including excavation and earth works PCC (1:3:6) type C2 for foundation PCC bed/coping in cement concrete (1:2:4) type B1, plastering in CM 1:3 painting with two coats of synthetic enamel paint over a coat of red oxide primerfor the size of chamber 1200 mm x 1200 mm x 1200 mm (internal dimention) complete all as specified and directed. 57 Supply, install,commissioning and testing of Horizontal split case cetrifugal pump set 1450 RPM having an output of minimum 1100 LPM at a head of 45 mtr coupled to 3 phase 415 volt squirel case induction motor of adequate capacity complete all as ditected by Engr-in-charge with and including following :-(a) Necessary cable for interconnection between starter panel & pump set with 1100 volt rated copperinsulated unarmoured cable of minium 10 sqmm 3 core cable(b) Single phase preventer (current sensing type)(c) Necessary light grade GI pipe protection for cabling from pump set to LT panel.(d) Bourden pressure gauge.(e) MS pipe flanged type class B of size 100 mm bore upto foot valve from suction end of pump.(f) PCC foundation in type B-2, 1:2:4 using 20mm graded aggregate, 20cm above ground level and 30cm below grond level including grouting of eye bolts nut etc. for pump set of adequate size or as per manufacturers recommendations.Note: All other items/material requiredfor fixing pumpset shall be included in cost quoted.(ii) Foundation drawing shall be approved by GE/ Eng-In- Charge before fixing the pump set. 58 Supply, installations, testing and commissioning of factory made LT Indoor cubical typepanel boardhaving 150 Amp rated copper bus bar with neoprene rubber gasket and locking arrangement, dust,weather and verminproof , free standing, floor mounting type self ventilation with wire mesh,totally enclosed busbar chamber fully comparted type, front openable hinged independent door for each compartment with locking arrangement and common openable hinged door from rear side of suitable size made out of 2mm thick CRCA sheet duly painted with seven tank process,415 V,TPN,50Hz both side properly welded MS angular supported with chanel frame of size 50mm,at all vertical corner grouted in PCC 1:3:6 (Type-C1 using 20mm graded stone aggregate) and connecting the incomming/outgoing feeder by providing brass cable glands and Lugs complete all as specified and directed comprising of followings accessories:- 59 Incoming:- (i) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 36 KA (Ics=100 % of Icu) with adjustable thermal Setting-01 No.Outgoing:-(i)MCCB 3 Pole 63 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with adjustable thermal Setting - 02 Nos (ii) Single phase preventor -02 Nos(iii) On load Change over switch 4 pole of current raring 63 A (open execution type) - 01 No(iv)MCB SPN 10 Amp C curve, 10 KA capacity - 01 No(v) fully automatic Star-delta starter 15 HP or recommended by manufacturer of motor -02 Nos(vi) LED Indicator lamp (R,Y,B)- Set of Three.(vii) Multifunctional meterDigital type showing V,A,F,Pf,KW,KWH inbuilt selector switch with CT coiles for three phase -0 1No. 60 M&L for construction of header of ERW pipe having size dia 300 mm and length 2.5 m with two inlet connection of size 100 mm & three otlet connection having size 150 mm complete monting on RCC base/plinth etc complete all as specified and as directed by Engr-in-charge. 61 EXTERNAL ELECTRIFICATIONBoring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine for laying under ground pipe upto 100mm dia complete all as specified and directed.Note :- GI pipe shall be measured and paid separately. 62 Taking out existing HT XLPE U/G cables, 11000 V grade from trenches/ducts/ poles etc of size 120 Sq. mm 3 Core etccomplete all as specified and directed. 63 Dismantling and taking down existing transformer mounted on four pole structure and shifting to nearest suitable location including its fixing on newly constructed platform and making all connection, testing as per requirementetccomplete all as specified and directed. 64 Dismantling and taking down existing 4-pole structure etccomplete all as specified and directed. 65 Dismantling and taking down existing 03 Nos of LT Panels, refixing at specified locationincluding connecting etc complete all specified and directed. 66 Taking out existing LT XLPE U/G cables, 1100 V grade from trenches/ducts/ poles etc of size 240 Sq. mm 3.5 Core etc complete all as specified and directed. 67 Taking out existing LT XLPE U/G cables, 1100 V grade from trenches/ducts/ poles etc of size 185 Sq. mm 3.5 Core etc complete all as specified and directed. 68 Taking out existing LT XLPE U/G cables, 1100 V grade from trenches/ducts/ poles etc of size upto 95 Sq. mm 3.5 Core etc complete all as specified and directed.Note For item No. 57 to 63 :- The old material obtained from site shall be deposite by contractor in MES store yard without any extra cost as directed by GE. 69 M&L for construction of plateform of size 3500 x 3500 x 1200mm with brick construction in cement mortar 1:4 PCC (M-10 nominal mix) in foundation, 100mm thick RCC M-25 grade slab, with 8mm MS TMT bars 120mm c/c on bothway, brick masonary steps on one side XPM Jali fixed on angle iron 40x 40x6 mm post upto height of 8 feet above ground level and openable gate with locking arrangment including making provision for entry and exit of HT/LT cables and steps made to access to the top of plateform including plastering to bricks masonary complete including painting with 2 coats of whitewash on plastered surface and painting steel surface with 2 coats of red oxide primeretc complete all as specified and directed. 70 Supply & fix HT 11 KV, outdoor type gang operated air-break switch suitable for horizontal or vertical mounting rotating type complee with drop out fuse having 12 insulators of rating upto 200 Amps etc complete all as specified and directed. 71 Supply and fixing lightning arrestor HT 11 KV, 10 KA station class etc complete all as specified and directed. 72 Supply & errect 2 pole structure on 11 mtr PCC pole consisting of pole with anti-climbing device, PCC foundation & cross arms (Bracings) etc for one incoming and one out going. etc complete all as specified and directed. 73 Supply, installation, testing & commissioning of package type/unitised 11kV / 433 V Outdoor sub-station (CSS) ,315KVA made from G. I. enclosure complete as required conforming to IEC 62271-202 only and relevant IS specifications including K-10 Temperature Class as applicable for the rating, Internal Arc of 21 KA/1 Sec. IAC AB on 1:2:4 (1 cement :2 cores and : 4 Graded stone aggrregate of 40 mm nominal size) PCC foundation of suitable size extending 500 mm all around the outdoor enclosure and 1000 mm height (above ground level) complete with suitable sizes of GI Pipes for incoming/outgoing cables/earthing strips etc. and consisting of following complete as required. Angle iron frame of size 40x40x5mm NS all along the corner of the foundation CSS shall be from OEMs only . Licensed System Integrators of approved OEM are not allowed to supply .Package substation will have the following equipment :- 74 HT SWITCHGEAR11kV 630Amps 21KA/3 sec. Non-Extensible Ring Main Unit Compact switchgear consisting of1 no. fixed motorized Vacuum Circuit Breaker Moduleand 2 nos. fixed morotized Load break switch module in SF6 insulated stainless steel enclosure with series trip, self powered microprocessor based numerical over current and earth fault relay protection. HT RMU shall preferably have site replaceable bushings to have very less downtime in the event of bushing breakage and restoration can be done immediately without sending the RMU to OEM Works. Interconnection between HT Switchgear and primary of transformer shall be done through 1C x 3R x 95 sq.mm Aluminium XLPE cable. - 1 No.Vacuum Interrupter,RMU,LT Switchgear and CSS Enciosure shall be of same make to ensure life cycle optimization.(i)Microprocessor based IDMT Relay for Circuit Breakers - Self Powered along with series trip coil (Modbus RS485 complaint)(ii)Capacitive voltage indication fixed type system with LED for all feeder and FPI in all load break switch feeder.(iii)SF6 Gas pressure indicator.(iv)Operating sequence of VCB must be O-0.3Sec-CO-3 Mins-CO(v)Protection CT shall be minimum 40/1A ,2.5VA ,5P10. - 3 Nos 75 (vi)All modules of the RMU shall be suitable for cable termination of 3C x 300 sq.mm Al XLPE Cable, incoming cable termination is included within the scope of work - 1 SetTRANSFORMER315 KVA 11KV/433V DYN-11 Oil type, hermetically sealed energy efficiency level-2 transformer (BEE Star Rated-2) with corrugated wall, without conservator, type of design & Top Bushings for HT & LT with Off load tap switch of rating +5% to -5% @2.5%. Temp Rise - Oil/Winding 40/45 Deg cel. Losses (As per IS-1180 amended up to date)Max Losses @ 50% Load 955W and Max Losses @ 100% Load 2750 KW and Impedance of 4.5% (Subject to IS Tolerance (as per IS1180-2014) The transformer shall be conforming to IS: 2026 and IS: 1180(part-I). amended up to date. (i)01 No. Winding Temperature Indicator with Alarm and trip Contact.LT PANELLVS PANEL 500 AMPS 4 pole Aluminium BUSBAR (100% FOR PHASES AND 100% FOR NEUTRAL) - CURRENT DENSITY OF Aluminum as 1 A/sq.mm. ; LT panel made up of 1.5/2 mm thick CRCA sheet INCOMER CUM OUTGOINGS FROM TRANSFORMER(i)500 Amps 433V 4P 50Hz 50KA Fixed Manual Type Air Circuit Breaker (ACB)(ii) Multifunction meter with Modbus RS485 port & class 0.5 accuracy with Suitable CT. - 1 set 76 (iii)Hard wiring from each equipment inside CSS for scada connectivity (monitoring & control)to be brought to one set of TBs and a space for FRTU to be given. Supply of FRTU is not in scope. (iv)All Civil works such as PCC/RCC foundation, Plateform, Filling trench and pedestal etc as per CSS manufacturers recomandation are included in scope of work.OUTDOOR ENCLOSUREOutdoor type encloser of 1.5 mm (For non load bearing members) & 2.0 mm (For load bearing members) thickness having modular construction of Galvanised Sheet Steel in suitable design for better heat dissipation and providing robust. 77 construction. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP 23 degree of protection for transformer compartment. The enclosure exterior shall be painted with epoxy based powder paint (colour RAL 7032). Each compartment will be provided with the door and pad locking arrangement. The design of the enclosure should be type tested for suitablly handling any arcing inside the compartment for providing better safety to the operator. The compartment illumination lamp with door operated switch shall be provided for each compartment.Vacuum Interrupter,RMU,LT Switchgear, Multifunction meterand CSS Enciosure shall be of same make to ensure life cycle optimization. 78 Supply, installation, testing & commissioning of package type/unitised 11kV / 433 V Outdoor sub-station , (CSS) 400KVA made from G. I. enclosure complete as required conforming to IEC 62271-202 only and relevant IS specifications including K-10 Temperature Class as applicable for the rating, Internal Arc of 21 KA/1 Sec. IAC AB on 1:2:4 (1 cement :2 cores and : 4 Graded stone aggrregate of 40 mm nominal size) PCC foundation of suitable size extending 500 mm all around the outdoor enclosure and 1000 mm height (above ground level) complete with suitable sizes of GI Pipes for incoming/outgoing cables/earthing strips etc. and consisting of following complete as required. Angle iron frame of size 40x40x5mm NS all along the corner of the foundation CSS shall be from OEMs only . Licensed System Integrators of approved OEM are not allowed to supply.Package substation will have the following equipment :-HT SWITCHGEAR11kV 630Amps 21KA/3 sec. Non-Extensible Ring Main Unit Compact switchgear consisting of1 no. fixed motorized Vacuum Circuit Breaker Moduleand 2 nos. fixed morotized Load break switch module in SF6 insulated stainless steel enclosure with series trip, self powered microprocessor based numerical over current and earth fault relay protection. HT RMU shall preferably have site replaceable bushings to have very less downtime in the event of bushing breakage and restoration can be done immediately without sending the 79 RMU to OEM Works. Interconnection between HT Switchgear and primary of transformer shall be done through 1C x 3R x 95 sq.mm Aluminium XLPE cable. - 1 No.Vacuum Interrupter,RMU,LT Switchgear and CSS Enciosure shall be of same make to ensure life cycle optimization.(i)Microprocessor based IDMT Relay for Circuit Breakers - Self Powered along with series trip coil (Modbus RS485 complaint)(ii)Capacitive voltage indication fixed type system with LED for all feeder and FPI in all load break switch feeder.(iii)SF6 Gas pressure indicator.(iv)Operating sequence of VCB must be O-0.3Sec-CO-3 Mins-CO(v)Protection CT shall be minimum 40/1A ,2.5VA ,5P10. - 3 Nos.(vi)All modules of the RMU shall be suitable for cable termination of 3C x 300 sq.mm Al XLPE Cable, incoming cable termination is included within the scope of work - 1 Set 80 TRANSFORMER400 KVA 11KV/433V DYN-11 Oil type, hermetically sealed energy efficiency level-2 transformer (BEE Star Rated-2) with corrugated wall, without conservator, type of design & Top Bushings for HT & LT with Off load tap switch of rating +5% to -5% @2.5%. Temp Rise - Oil/Winding 40/45 Deg cel. Losses (As per IS-1180 amended up to date)Max Losses @ 50% Load 1150W and Max Losses @ 100% Load 3330 KW and Impedance of 4.5% (Subject to IS Tolerance (as per IS1180-2014) The transformer shall be confirming to IS: 2026 and IS: 1180(part-I). amended up to date. (i)01 No. Winding Temperature Indicator with Alarm and trip Contact.LT PANELLVS PANEL 630 AMPS 4 pole Aluminium BUSBAR (100% FOR PHASES AND 100% FOR NEUTRAL) - CURRENT DENSITY OF Aluminum as 1 A/sq.mm. ; LT panel made up of 1.5/2 mm thick CRCA sheet INCOMER CUM OUTGOINGS FROM TRANSFORMER(i)630 Amps 433V 4P 50Hz 50KA Fixed Manual Type Air Circuit Breaker (ACB) (ii) Multifunction meter with Modbus RS485 port & class 0.5 accuracy with Suitable CT. - 1 set 81 (iii)Hard wiring from each equipment inside CSS for scada connectivity (monitoring & control)to be brought to one set of TBs and a space for FRTU to be given. Supply of FRTU is not in scope. (iv)All Civil works such as PCC/RCC foundation, Plateform, Filling trench and pedestal etc as per CSS manufacturers recomandation are included in scope of work.OUTDOOR ENCLOSUREOutdoor type encloser of 1.5 mm (For non load bearing members) & 2.0 mm (For load bearing members) thickness having modular construction of Galvanised Sheet Steel in suitable design for better heat dissipation and providing robustconstruction. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP 23 degree of protection for transformer compartment. The enclosure exterior shall be painted with epoxy based powder paint (colour RAL 7032). Each compartment will be provided with the door and pad locking arrangement. The design of the enclosure should be type tested for suitablly handling any arcing inside the compartment for providing better safety to the operator. The compartment illumination lamp with door operated switch shall be provided for each compartment.Vacuum Interrupter,RMU,LT Switchgear, Multifunction meterand CSS Enciosure shall be of same make to ensure life cycle optimization. 82 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge(Panel 1 - Near mains transformer GTC Area):- 83 INCOMING :-(i) S&F ACB 4 Pole 630 amps ,415 Volt electrical drawout type of breaking capacity not less than50 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(ii) Aluminium electrolite Busbar 750 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBsOUTGOING:-(i) S&F MCCB 4 Pole 315 amps ,415 Volt of breaking capacity not less than16 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 No (for LT distribution panels of block )(ii) S&F MCCB 4 Pole 200 amps ,415 Volt of breaking capacity not less than16 KA (Ics=100 % of Icu) with adjustable thermal Setting (Optium 2.0) -02 Nos(for LTP Pump Motor, lift, fire fighting, stree light etc + spare).(iii)Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(ivDigital volt meter 0-400 V with selector switch - 01 No.(v)LED Indicating Lamps R,Y,B - 01 Set of three 84 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 2 - Near Chambal Vihar Main Tfr Panel):-INCOMING :-(a) S&F MCCB 4 Pole 500 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(b) Aluminium electrolite Busbar 600 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs 85 OUTGOING:-(i) S&F MCCB 4 Pole 250 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 No (for LT distribution panels of blocks)(ii) S&F MCCB 4 Pole 160 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with adjustable thermal Setting (Optium 2.0) -02 Nos(for LTP Pump Motor, lift, fire fighting, stree light etc + spare).(iii)Street light timer using Power contactor 32 Amps, (1-NO) 3 pole, 415Volt, DIN Type digital programable time switch 230V AC, Auto/Manual selector switch, MCB 4 pole 25 Amps C-range, ON/OFF indicator all prewired and making provision for fixing outgoing cables- 01 Set complete.(iv)Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(v)Digital volt meter 0-400 V with selector switch - 01 No.(vi)LED Indicating Lamps R,Y,B - 01 Set of three 86 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 1A - LT PANEL FOR 3 X BLOCKS GTC):-INCOMING :-(i) S&F MCCB 4 Pole 315 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(ii) Aluminium electrolite Busbar 400 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs 87 OUTGOING:-(i) S&F MCCB 4 Pole 125 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 04 No (for 3 X Blocks+spare)(ii) Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(iii)Digital volt meter 0-400 V with selector switch - 01 No.(iv)LED Indicating Lamps R,Y,B - 01 Set of three 88 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 2A - LT PANEL FOR 2 X BLOCKS CHAMBAL VIHAR):-INCOMING :-(i) S&F MCCB 4 Pole 250 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(ii) Aluminium electrolite Busbar 400 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs 89 OUTGOING:-(i) S&F MCCB 4 Pole 125 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 03 No (for 3 X Blocks+spare)(ii) Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(iii)Digital volt meter 0-400 V with selector switch - 01 No.(iv)LED Indicating Lamps R,Y,B - 01 Set of three 90 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 1B & 2B):-INCOMING :-(i) S&F MCCB 4 Pole 200 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range-01 No incoming.(ii) Aluminium Electrolite Busbar 300Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs-01Set 91 OUTGOING:-(i) MCCB 4 pole 63 Amp, 415 V, 16 KA, C-series. - 01 Nos (for PH Panel)(ii) MCCB 4 pole 40 Amp, 415 V, 16 KA, C-series- 02 Nos (sewage PH +spare).(iii) MCB TPN 25Amp, 230 V, 10 KA, C-series - 07 Nos (Lifts+fire fighting+Street lights)(iv)Street light timer using Power contactor 25 Amps, (1-NO) 3 pole, 415Volt, DIN Type digital programable time switch 230V AC, Auto/Manual selector switch, MCB 4 pole 25 Amps C-range, ON/OFF indicator all prewired and making provision for fixing outgoing cables- 01 Set complete.(v) Digital Ammeter 0-150 A with selector switch & CTs of suitable capacity - 01 set.(vi) Digital volt meter 0-500 V with selector switch - 01 No. (vii) On load Change over switch 4 pole of current raring 63-100 A (open execution type) - 01 No.(viii)LED Indicating Lamps R,Y,B - 01 Set of three 92 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel D - DOE Area):-INCOMING :-(i) S&F MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than16 KA (Ics=100 % of Icu) with adjustable thermal Setting (Optium 2.0)-01 No incoming.(ii) Aluminium Electrolite Busbar 150 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs-01Set 93 OUTGOING:-(i) MCCB 4 pole 63 Amp, 415 V, 16 KA, C-series - 02 Nos (for Bldg + Spare)(ii) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (Garages + Spare).(iii) MCB SPN 10 Amp, 230 V, 10 KA, C-series - 02 Nos (Security light + Spare)(iv) Digital Ammeter 0-150 A with selector switch & CTs of suitable capacity - 01 set.(v) Digital volt meter 0-500 V with selector switch - 01 No.(vi)LED Indicating Lamps R,Y,B - 01 Set of three 94 M&L for factory made busbar box 750 Amps rated Aluminium busbar, 3 phase, 4 wire, 415 Volt of size not less than 300mm x 200mm x 100mm, fabricated using 1.6mm MS sheet, duly painted with smoke gray powder coated over a coat of red oxide primer suitable for fixing on wal by using wall fastners 10mm dia and making necessary incomming and outgoing connection of electric cables using aluminium lugs etc complete all as specified and diected. 95 M&L for factory made busbar box 600 Amps rated Aluminium busbar, 1 phase, 245 Volt, size not less than 200mm x 150mm x 100mm, fabricated using 1.6mm MS sheet, duly painted with smoke gray powder coated over a coat of red oxide primer suitable for fixing on wall by using wall fastners 10mm dia and making necessary incomming and outgoing connection of electric cables using aluminium lugs etc complete all as specified and diected. 96 Supply and fixing poly carbonatejunction box , weather and vermin proof of size 250X250X160 including provn of 4 Nos aluminium strip 25x3.15 mm size bus bar single phase and neutral suitabely mounted on bus bar insulators ,including one No. MCB SP 6 Amps for light control,drilling of holes.Provn of suitable size of GI nuts, bolts, double washer and FI clamps ofsuitable sizefor taking connections and fixing on LT steel tubular poles complete with locking arrangementcomplete all as specified and directed. 97 Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5Sqmm 1100 Volt , draw through LT steel tubular polesfor connection to street light from junction boxetc complete all as specified & directed. 98 S&F for Cable route indicator, duly engraved with LT CABLE 1100 VOLT on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PCC 1:3:6 type C-1, block of suitable size etc complete all as specified & directed. 99 M&L for Precast PCC (1:2:4) type B-1 cable path indicators of size 300x100x500mm rounded top having engraved in capital letters HT Cable embedded in position in PCC(1:3:6) Type C-1, using necessary formwork and including provision of two coats of cement base paint on exposed concrete surface and writing HT Cable in black synthetic enamel paint etc complete all as specified & directed. 100 M&L fordecorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watts including LED lamp etc complete all as specified & directed. 101 M& L for shifting of 33 KV HT cable to a safe distance from proposed building, supply, laying, testing & commisioning of 33 KV cable in replacement with new as per estimate provided by State electricity deptetc etc complete all as specified & directed. 102 FIRE FIGHTINGS&F forAutomatic air release valve 50mm dia suitable for domestic water with 25mm gun metal stop valveetc complete all as specified & directed. 103 S&F forbranch pipe with nozzle of 20mm dia for hose reel conforming to IS 8090etc complete all as specified and directed. 104 S&F forfix Valve, stop, screwed, 25 mmdia pipeetc complete all as specified and directed. 105 S&F for6 kg capacity Multipurpose dry chemical powder (ABC) type(IS-15683) fire extinguishers consisting of welded MS cylindrical body fabricated from 1.6 mm MS sheet internally protected with anticorrosive treatment and hydraucally tested. Extinguisher externally painted with red enamel and fixed to wall with bracket complete with initial filled/charged .etc complete all as specified and directed. 106 S&F forCO2 type fire extinguisher of 3 Kgs capacity with steel cylinder with a discharge valve and confirming to IS : 15683.Extinguisher shall be painted with red enamel apint and fixed to wall with bracket etc complete all as specified and directed. 107 S&F for9 Ltr capacity Foam type(IS-15683) fire extinguishers consisting of welded MS cylindrical body fabricated from 1.6 mm MS sheet internally protected with anticorrosive treatment and hydraucally tested. Extinguisher externally painted with red enamel and fixed to wall with bracket complete with initial filled/chargedetc complete all as specified and directed. 108 S&F fortesting of Star-Delta starter Panel for fire fighting pump motor etc complete all as specified and directed. 109 Supply, installation, testing & commissioning ofFIRE SIGNAGES for indication/information of fire exit, alarm panel, fire extinguishers fire axe, hose reel, hydrents, lifts of size 300mmx100mm etc complete all as specified and directed. 110 DG SETSSupply, installation, commissioning and testing complete of Manufacturer of OEM (Original Eqpt Manufacturer) manufactured and tested static Diesel Engine driven generating set capable of delivering 180 KVA continuous rating, (10% overload for 1 hour in 12 hours of operation), 415 volts (AC 3 phase, 4 wire system of supply), 50 Hz at power factor 0.8 minimum. The DG set shall consist of a diesel engine coupled directly to a matching alternator, and mounted on Dunlop metallastik foundation pads on a common base frame and thereafter installed in the CPCB approved acoustic enclosure complete with control panel standardised by manufacturer, fuel tank with mounting arrangement and inlet, outlet, return oil arrangement, flexible exhaust pipe complete all as specified and directed and shall include comprise of the following :- 111 (A) Engine (prime mover) : Diesel engine 1500 RPM, of suitable HP as recommended by manufacturer, water cooled, turbocharged, 12 volts electric battery start, complete with fly wheel and torsional vibration damper, rediator and all standard fittings/fixtures as per standard manufacturing practices and including suitable instrument panel with RPM meter, lub oil temp and pressure gauge, water temp gauge and frequency meter (digital type), battery charging ammeter and fuses, and also including self starter (12V), battery charging alternator, fuel tank etc and complete with HWT and LLOP alarm and shut down safeties complete with first fill of Lub oil and Coolent. (B) Alternator : AC alternator, brushless, 415V AC 50 Hz, 3 phase, 4 wire type, rated for continuous output of 63 KVA, PF 0.8 (lag), 1500 RPM insulation class H; enclosure SPDP (IP 22/23), self excited & self regulated with AVR for + 1% voltage regulation, coupled directly/suitably to and to match the above engine and conforming to BS 5000/IS 4722. 112 (C) Dunlop Metallastik anti-vibration of pads for mounting engine - alternator assembly on the base frame/plate.(D) Base plate : Made out of structural steel as per manufacturers recommended design/specifications.(E) Enclosure : Provision of an integral type, approved/certified acoustic enclosure as per latest CPCB norms, for the DG set to restrict the noise level to 75 DB (A) at one metre and ensure that temperature rise within the canopy shall not exceed 5 - 7 degree celsius, It shall be made of 16 SWG CRCA MS sheet with powder-coated finish on outside and high quality noise absorbent and fire retardant grade acuoustic insulation material duly provided with EPDN gasket lining. There shall be four hinged doors out of which one shall be with a glass window.(i)Silencer : Absorption type, non-resistance, residential.(ii) Internal wiring with PVC copper conductor cables, IS 694 marked, FRLS in conduit and suitable light fittings.(iii)Fuel tank to be provided as per OEM specificaton.(iv)Safeties for high enclosure temperature and emergency shut-down from outside.(v) 1No 12V of suitable AH lead acid batteries and adequate size copper conductor cable leads, housed on & including suitable size MS angle iron frame and necessary clamps, nuts, bolts, washers all as required & as per manufacturer design/specifications.(F) Control panel : Control panel made out of 14 gauge CRCA sheet, powder coated and shall consists of the following: - 113 (i) Ps 0500 Controller (ii) Aluminium Bus bars with suitable capacity incoming & outgoing terminals.(iii) Indicating lamps for load on and set running (iv) Instrument fuses duly wired and ferruled. (v) Circuit breaker(MCCB) of suitable rating with overload and short circuit protections. Note: To be mounted inside enclosure. (G) Automatic mains failure (AMF) control panel fabricated from CRCA sheet steel of thickness not less than 3.15 mm, suitable for outdoor installation (including CPRI type test certified), dust & vermin proof, protection class I P-54 suitable for 415 volts, 3 phase, 4 wire, 50 Hz, AC supply system with adequate layers of power coating floor mounting type with front opening, the AMF panel shall comprise the following indicating instruments & switches:- 114 AC voltmeter - 01NoVoltmeter selector switch OFF/RY/YB/BR - 01NoFrequency meter - 01NoAC voltmeter of suitable scale - 01NoAmmeter selector switch OFF/R/Y/B - 01NoCurrent transformers of suitable ratio - 01NoBattery charger consisting of - 01No(aa) Transformer / Rectifier unit (bb) DC ammeter /DC voltmeter(cc) Charging rate selector switch OFF/Trickle/BoostMains supply air break contactor, 3 pole of suitable raing - 01NoAlternator air break contactor, 3 pole of suitable rating and provided with a separate overload relay for overload protection - 01NoMains supply voltage monitor - 01NoSet of DC control relays and timers - 01NoSet of push buttons, START, STOP, ACKNOWLEDGE, RESET, MAINS BREAKER, CLOSE/TRIP, ALTERNATOR BREAKER CLOSE / TRIP - 01No 115 01 Set of indicating lamps for the following :-LOAD ON MAINS, LOAD ON SET, SET FAILS TO START, LOW OIL PRESSURE, HIGH TEMPERATURE ALARM, HIGH TEMPERATURE TRIP, ALTERNATOR OVERLOAD.Audio - alarm hooter - 01NoKWH meter - One Set of Bus bars - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections.KW meter - 01Noset of bus bar - 01NoThe control cubical will be furnished complete with the necessary control circuit fuse etc and will have provision for making incoming and outgoing connectionsOne - set of bus bar - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections.Note :(i) In case AMF panel included instead of Standard Control Panel, then Battery charging alternator with inbuilt regulator and battery charging ammeter should be deleted from engine specifications since Battery charger included under AMF Panel specifications. 116 (ii) Platform : PCC foundation /plinth/baseshall be provided as per drawing No: TD/2010/109, Sheet No 1/1.(iii) Tool kit, Operation and Maintenance catalogue, 1 year spare part list, overhauling manuals, guarantee card etc shall be provided as per manufacturer standard practices. 117 Supply, installation, commissioning and testing complete of Manufacturer of OEM (Original Eqpt Manufacturer) manufactured and tested static Diesel Engine driven generating set capable of delivering 125 KVA continuous rating, (10% overload for 1 hour in 12 hours of operation), 415 volts (AC 3 phase, 4 wire system of supply), 50 Hz at power factor 0.8 minimum. The DG set shall consist of a diesel engine coupled directly to a matching alternator, and mounted on Dunlop metallastik foundation pads on a common base frame and thereafter installed in the CPCB approved acoustic enclosure complete with control panel standardised by manufacturer, fuel tank with mounting arrangement and inlet, outlet, return oil arrangement, flexible exhaust pipe complete all as specified and directed and shall include comprise of the following :- 118 (A) Diesel engine 1500 RPM, of suitable HP as recommended by manufacturer, water cooled, turbocharged, 12 volts electric battery start, complete with fly wheel and torsional vibration damper, rediator and all standard fittings/fixtures as per standard manufacturing practices and including suitable instrument panel with RPM meter, lub oil temp and pressure gauge, water temp gauge and frequency meter (digital type), battery charging ammeter and fuses, and also including self starter (12V), battery charging alternator, fuel tank etc and complete with HWT and LLOP alarm and shut down safeties complete with first fill of Lub oil and Coolent. (B) Alternator : AC alternator, brushless, 415V AC 50 Hz, 3 phase, 4 wire type, rated for continuous output of 63 KVA, PF 0.8 (lag), 1500 RPM insulation class H; enclosure SPDP (IP 22/23), self excited & self regulated with AVR for + 1% voltage regulation, coupled directly/suitably to and to match the above engine and conforming to BS 5000/IS 4722. (C)Dunlop Metallastik anti-vibration of pads for mounting engine - alternator assembly on the base frame/plate. 119 (D) Base plate : Made out of structural steel as per manufacturers recommended design/specifications.(E) Enclosure : Provision of an integral type, approved/certified acoustic enclosure as per latest CPCB norms, for the DG set to restrict the noise level to 75 DB (A) at one metre and ensure that temperature rise within the canopy shall not exceed 5 - 7 degree celsius, It shall be made of 16 SWG CRCA MS sheet with powder-coated finish on outside and high quality noise absorbent and fire retardant grade acuoustic insulation material duly provided with EPDN gasket lining. There shall be four hinged doors out of which one shall be with a glass window.(i)Silencer : Absorption type, non-resistance, residential.(ii) Internal wiring with PVC copper conductor cables, IS 694 marked, FRLS in conduit and suitable light fittings.(iii)Fuel tank to be provided as per OEM specificaton.(iv)Safeties for high enclosure temperature and emergency shut-down from outside.(v) 1Nos 12V of suitable AH lead acid batteries and adequate size copper conductor cable leads, housed on & including suitable size MS angle iron frame and necessary clamps, nuts, bolts, washers all as required & as per manufacturer design/specifications. 120 (F) Control panel : Control panel made out of 14 gauge CRCA sheet, powder coated and shall consists of the following: - (i) Ps 0500 Controller (ii) Aluminium Bus bars with suitable capacity incoming & outgoing terminals.(iii) Indicating lamps for load on and set running(iv) Instrument fuses duly wired and ferruled. (v) Circuit breaker(MCCB) of suitable rating with overload and short circuit protections. Note: To be mounted inside enclosure. (G) Automatic mains failure (AMF) control panel fabricated from CRCA sheet steel of thickness not less than 3.15 mm, suitable for outdoor installation (including CPRI type test certified), dust & vermin proof, protection class I P-54 suitable for 415 volts, 3 phase, 4 wire, 50 Hz, AC supply system with adequate layers of power coating floor mounting type with front opening, the AMF panel shall comprise the following indicating instruments & switches:- AC voltmeter -01 NoVoltmeter selector switch OFF/RY/YB/BR - 01 No 121 Frequency meter - 01 NoAC voltmeter of suitable scale - 01 NoAmmeter selector switch OFF/R/Y/B - 01 NoCurrent transformers of suitable ratio - 01 NoBattery charger consisting of - 01 No(aa) Transformer / Rectifier unit (bb) DC ammeter /DC voltmeter(cc) Charging rate selector switch OFF/Trickle/BoostMains supply air break contactor, 3 pole of suitable raing - 01 NoAlternator air break contactor, 3 pole of suitable rating and provided with a separate overload relay for overload protection - 01 NoMains supply voltage monitor - 01 NoSet of DC control relays and timers - 01 NoSet of push buttons, START, STOP, ACKNOWLEDGE, RESET, MAINS BREAKER, CLOSE/TRIP, ALTERNATOR BREAKER CLOSE / TRIP - 01 No01 Set of indicating lamps for the following :-LOAD ON MAINS, LOAD ON SET, SET FAILS TO START, LOW OIL PRESSURE, HIGH TEMPERATURE ALARM, HIGH TEMPERATURE TRIP, ALTERNATOR OVERLOAD.Audio - alarm hooter - 01NoKWH meter - One Set of Bus bars - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections. 122 KW meter - 01Noset of bus bar - 01NoThe control cubical will be furnished complete with the necessary control circuit fuse etc and will have provision for making incoming and outgoing connectionsOne - set of bus bar - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections.Note :(i) In case AMF panel included instead of Standard Control Panel, then Battery charging alternator with inbuilt regulator and battery charging ammeter should be deleted from engine specifications since Battery charger included under AMF Panel specifications. 123 (ii) Platform : PCC foundation /plinth/baseshall be provided as per drawing No: TD/2010/109, Sheet No 1/1.(iii) Tool kit, Operation and Maintenance catalogue, 1 year spare part list, overhauling manuals, guarantee card etc shall be provided as per manufacturer standard practices. 124 Supply, installations, testing of electric chimney of size 60cm havingsuction capacity of 1200 cum per hour with filterless technology sealed motor and insulationfor oil deposit and water vapour alongwith self autoclean feature after 30 cycles of operation and minimum 5 year warranty etc etc complete all as specified and directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
TenderDetail
Loading tenders