View Bid Results For Renewal Of Bldg Tenders

We found 149 Bid Results related to renewal of bldg tenders. You can find Contractor details who won renewal of bldg tenders along with contract details in Bid awards announcements section.

Indian Tenders
4
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
139
8
2
Tender Publishing Platform
3
146
State / UT
29
30
15
13
12
11
8
8
7
6
5
4
3
3
3
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
Contract Value
11
14
123
1
Publish Date
0
0
0
0
0
Sector
4
140
7
1
1
Ownership
2
140
9
Within keyword
Active filters:
Showing 1–3 of 149 tenders matching your filters
Karnataka View Result →
Karnataka View Result →
3.
Defence #11262833 Price Bid
Tender for Repair / Replacement Of Internal Wiring, Electrical Fittings & Fixture, Renewal Of Bldg Earthing And Other Connected Items In repair of Of Otm And Md Accn Hq Meg & Centre Area Under Ge (North) Bangalore
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 7
Karnataka View Result →
4.
Defence #11262832 Price Bid
Tender for Repair / Replacement Of Internal Wiring, Electrical Fittings & Fixture, Renewal Of Bldg Earthing And Other Connected Items In repair of Of Otm And Md Accn Hq Meg & Centre Area Under Ge (North) Bangalore
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 7
Karnataka View Result →
Andhra Pradesh View Result →
6.
Defence #10213625 Price Bid
Provision Of Tilling In Certain Bldgs Under Cell No 1 At Nofra And Renewal Of Existing Wiring Aluminum With Copper Wiring In Order To Enhance Loading Capacity At Admin Block Of Nt Pool Under Ge Nw Nofra Colaba Mumbai
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Maharashtra View Result →
Lakshadweep View Result →
8.
Communications and Information Technology  #10123390 Price Bid
Comprehensive Amc Of 8 Passenger Capsule Lift, Repair And License Renewalin Satcom Te Bldg At Wms Compound, Jayanagar Bengaluru Sh-I. Comprehensive Amc And Sh-Ii. Repair And License Renewal
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Karnataka View Result →
Tamil Nadu View Result →
Tamil Nadu View Result →
11.
Defence #9951965 AOC
Tender For Completion Of Incomplete Work For Special Repair/Renewal To Surveyed Off Certain Steel And Wooden Furniture And Provn Of Furniture For Single Offrs Accn Bldg No. Bo-04 And Bo-09 Under Ge.
Contract Date: Mar 30, 2026 Contract Value : ₹ 13.35 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Meghalaya View Result →
12.
Defence #9884846 AOC
Bids Are Invited For Custom Bid For Services - Job Order For Renewal Of Burnt Out Wiring In Bldg No E-06 Engr Mess Of Ge(East) Lucknow
Contract Date: Ref. Documents Contract Value : ₹ 2.39 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 7
Uttar Pradesh View Result →
13.
Defence #9799497 AOC
Tender For Comprehensive Maintenance Repair & Replacement Of Fire Fighting System Installed At Different Sectors Under Age(I) Cg Noida.; 1 Comprehensive maintence, testing/Servicing and repair including preventive and periodical maint with renewals and replacement of defective parts of all existing fire protection and fire fightingsystem complete consisting of main fire control panels of 1X 7.5HP ,2X 105HP Motorand 1X Engine pump 78.5KWby necessary decarbonising ,cleaning, tightening & 100 % servicing of of all loose contact , sub panels,smoke/heat detector/response indicator Electric driven pump 105 HP, Diesel driven pump with 78.5KW , Jockey pump, pressure switch, presure vessels, fire hydrents, hose reels, canvas hose pipes, gunmetal valves shut of nozzels sprinklers etc with control panel, starters and to keep Fire fighting system and fire alarm system auto runmode on variation in pressure to make 100% serviceability of the complete including checking, cleaning of fire detector by removing dust or dirt, cleaning of heavy greasy deposit if any, checking the connection of battaries, specific gravity of electrolyte, the alarm function control panel and indicating eqpts be checked by the opration of trigger device in each zone as described the system installed at Coast guard premises , Sector 62 Noida every month during first or Last week as directed by Enginer -in-Charge. 2 (a) Cost of new components shall be paid for separately under relevant item of shchedule A (b) Contractors rep will visit minimum once in a month to every panel and take servicibility certificate duly signed by the users and MES Rep.Additional visit as and when required will not be paid as extra.(c) Cost of minor spares any typenot costing more than Rs 500.00 per month in totaldeemed to be included in the quoted rate. (d) Payment will be processed on production of servicibilty certififace only and a panel recovery @ double the quoted rate will be charged for non carrying out of monthly serviceability checkNOTE:- (i) The rate quoted above shall be inclusive of minimum material as mentioned above and labour for unserviceable items, replacement of unserviceable eqpts and any other item not mentioned in the schedule but required to be replaced to make the Fire Fighting systemserviceable complete all as directed. (ii) The bidder are requested to inspect the FF system to accertain the servicebility of all the equipments if any itesms required to be repaired or replaced are deemed to be included in the quoted rate. 3 (iii) The rates quoted shall be inclusive T&P required for carrying repairs and stationery for maintaining records such as daily ,fortnightly,monthly,quarterly and yearly maintenence, complaints book etc all as described by the Engr in charge. (iv) Normally maintaenance shall be carried out in day time but in case of emergency /breakdown, it should be attenend at odd hrs/night times andadditional manpower if required will be arranged by the contractor without any extra cost& rates. (v) The contractor shall provide the service of trained personnel, ITI qualified mechanic and oprator with 3 yrs exeperience & helper shall 12th pass and supervisor shall be minimum diploma certificate holder with 3 yrs exeperience in the trade. 4 (vi) The contractor shall carry out daily routine checking of the complete system and rectify the minor /major defects noticed immediately.One seprate register to be maintained as complaint registor received from department /user user signature shall be obtained after rectifying defects, each time.If complaints are not attended within 24 hours, following penalties will be imposed and deducted from payment to the contractors ;- contractor on the contractor quoted rates shall be deemed to include the cost of daily routine checking of complete system, rectification of defects and cleaning of installation from inside and outside with cleaning materials. Rs 500/- for not attending the complaint and keeping it pending beyond 24 hours per complaint per day.(vii) All consumable & maint material such as oil, lubricants, grease, thimbles etc will be deemed to be included in the rate quoted against above schedule.(viii) The contractor will use only genuine/original new parts as approved by original equipment manufacturer during repair and old unserviceable materials should be kept at site till verifiaction and proper register to be maintained complete all as specified and directed by Engr-in-charge.(ix) In case any rewinding of motor is required cost of disconnection transportation and reassembling cost shall be deemed to include the quoted rate. Other items such as copper winding wire bushes bearing etc shal be measured and paid seperately under relevent item of Sch A. 5 Supply and fix brass jumper valve with nitrile washer 65 (Spindle valve) for fire hydrents 6 S&F Gunmetel single headed landing valve(Hydrant) with 63 MM female instantanious outlet connection with blank caps ans chain complete with suitable orific plate assembly confirmong to IS 903 7 S&F stainless steeldouble headed hydrant valve as per IS 5714 consisting of 63 NB double flanged oblique type hydrant valve with instantanious female plunger type coupling chained blank cap including making flanged joints by providing nuts bolts gaskets all complete as per specifications suitable for 63 NB stand post. 8 Supply and fix in replacement of water flow switch on sprinkler distribution system for indicating water flow in sprinkler system. 9 M&L for Rough cast wired glass, 6.4mm thick and glazing with oil putty in square exceeding 1.5 M 10 Supply and fix in replacement, impact impression and weathering resistant rubbarised fabric lined (RRL) hose pipe conforming to IS 636-1979 (Type A) of 63 MM dia andmale and female coupling conforming to IS 903-1975. (Coupling will be measured and paid under relevent item of Sch A . Make: Newage/Dunlop/Cosmos/Flame Guard 11 Supply and fix in replacement, thermoplastic hose pipe isi marked bearing IS 12585 20 MM dia type II. Make: Newage/Dunlop/Cosmos/Flame Guard 12 Supply and fix in replacement stainless steel branch pipe nozzle suitable for 63 MM dia Hose pipe. 13 Supply and fix Stainless steel coupling 63 MM Diaall as specified and directed by engineer in Charge 14 M&L for replacement of the Rubber washer for Male Female Coupling 63 mm. complete all as specified and directed. 15 .M&L for replacement of the Rubber washer Rubber washer for Branch pipe & nozzle 63 mm. complete all as specified and directed. 16 Supply and fix in replacement swinging type fire hose drum complete . 17 S & F in repairgun metal Shut off nozzles of size 20mm all as directed by engr in charge.Make:- AAG /WINCO /NITIN / MINIMAX/ NEW AGE/ SAFEX 18 Supply and fix in replacement 25MM bore gunmetel chrome finished ball valves for test and drain connection with fittings of screwed end type. 19 Supply and fix in replacement Stainless steel corrugated flexible drop pipefor connecting sprinklers on false ceiling . Flexible pipe shall 25 MM Dia with screwed inlet of 25 MM Dia and screwed outlet of 15 MM Dia .The flexible pipe shall be compitable with system pressure and length shall be 1000MM/ suitable for the site requirement . 20 Supply and fix in replacement brass body quartzoid bulb type automatic sprinkler headsset to operate at specified temperature of Pendant type sprinkler heads shall be complete with detector . The finish shall be chrome size of 15 MM dia operating temperature 68 Degree C with K 80 . 21 Supply and fix in replacement brass body quartzoid bulb type automatic sprinkler headsset to operate at specified temperature of Upright type sprinkler heads shall be complete with detector . The finish shall be chrome size of 15 MM dia operating temperature 68 Degree C with K 80 . 22 Supply and fix in replacement forged brass air vents 25 MM Dia with in built strainer complete . 23 Supply and fix in replacement 3 Pole contactor built in auxilary contact suitable for 105 HP pump ( Make -ABB ModelAX 80-30 or equivalent ) 24 Supply and fix in replacement Spares for auxilary contactfront mounted single pole add on blocks Make ABB Model CA5-01or equivalent suitable for 105 HP pump 25 Supply and fix in replacement Sparefor auxilary contactside mounted single pole add on blocks Make ABB Model CA5X-11or equivalent suitable for 105 HP pump 26 Supply and fix in replacement Spare coils for contact(Make ABB Model A26or equivalent suitable for 7.5 HP pump 27 Supply and fix in replacement thermal over load relay(Make ABB Model TA25DU-Mor equivalent suitable for 105 HP pump 28 Supply and fix in replacement single phase preventer (auto reset 50 Volts unvbalance)( Make MINILAC Model VSP 3 or equivalent) 29 Supply and fix in replacement On delay timer Single range (Make SELECModel 800S-1-ON-60S-230or equivalent all as specified and directed by Engr In charge. 30 Supply and fix in replacement of Pressure switch (Make Danfoss or equivalent) all as specified and directed by Engr In charge. 31 Supply and fix in replacement ofOn delay timer 24V DC 5A (Make TEKNIC or equivalent) all as specified and directed by Engr In charge. 32 Supply and fix in replacement ofrelay (Make SALZER Model MSp4p 100-110vacor equivalent) all as specified and directed by Engr In charge. 33 S & F in repairLED digital Voltmeter complete all as specified and as directed. Make: L&T/Secure/C&S Electric/Ducati 34 S & F in repairLED digital Ammeter, complete all as specified and as directed. Make: L&T/Secure/C&S Electric/Ducati 35 S & F in repair selector switch for voltmeter or ammeter complete all as specified and as directed. Make: L&T/Secure/C&S Electric/Ducati 36 S & F in repair MCCB 100 AmPs4 pole complete all as specified and directed. Make : Schneider/L&T/Legrand/C&S Electric/Havells 37 M& L in replacement fuel filter cateridges primary and secondary for 62 KW /80 KW kirloskar engine complete all as specified and directed. 38 M& L in replacement oil filter cateridges for 62 KW /80 KW kirloskar engine complete all as specified and directed. 39 M& L in replacement solonoid switch for engine stop function for 62 KW /80 KW kirloskar engine complete all as specified and directed. 40 M& L in replacement of Battary Charger 220Volt AC/12 Volt DC ,5 Amps compactpanel mounting type suitable for Fire fightingpanel for charging the battery of FF engine complete all as specified and directed by Engr in Charge. Make: Su-kam/Amco/WAC/BCH 41 M& L in replacement Engine Oil 15 W 40for DG set 62 KW and 80 KW complete all as specified and directed by Engr In Charge. Make Castrol/Volvoline/OPCL 42 Supplyand filling Coolent for Diesel Engine 62 KW and 80 KW complete all as specified and directed Engr In Charge. Make Lubinex/Feetguard 43 Supply and filling distilled water for Diesel Engine 62 KW and 80 KW complete all as specified and directed by Engr In Charge. 44 M& L in replacement Radiator Hose pipe with clampsfor Diesel Engine 80 KW complete all as specified and directed by Engr-in-Charge. 45 Taking down of Fuel Tank of Diesel Engine 80 KW and cleaning and removal of silt by cleaning of Diesel complete all as specified and directed by Engr-in-Charge. 46 Supply only Gland packing 6mm to 10mm thick supreme quality complete all as specified and directed. Make : ISI marked. 47 Supply only M seal in 100 gram packet each supreme quality complete all as specified and directed. Make : ISI marked. 48 Supply and fix in repair cast ironbutterfly valve 150 MM dia having epoxy coated disc steel shaft EPDM/Nitrile rubber field, replaceable body including set of MS flanges. 49 Supply and Fix in repair 24 VoltManual call point 50 Supply and Fix in repair Cast iron duel plate wafer type check valve 150 MM complete all as specified. 51 Supply and Fix in repair Cast iron duel plate wafer type check valve 65 MM complete all as specified. 52 Supply and Fix in repair trip circuit supervision relay model L&T TCS01nXcomplete all as specified. 53 Supply and Fix in repair Control relays (Auxillary contacts) type MX0 22E (2NO+2 NC) complete all as specified. 54 Supply and Fix in repair Monitoring relays , under and over freequency relay (variable -UF/OF) (Auto -Manual reset,1CO+1CO contact) Power ON delay and trip delay 1 -10 SecS2 FMR 1 (Minilec)complete all as specified. 55 Supply and Fix in repair Monitoring relays ,reverse power relay (3 ph 3 wire)RPT D2 (Minilec)complete all as specified. 56 Supply and Fix in repair3 Ph 3wire,3 Phase 4 wire under and over voltage relay (Auto-manual reset Trip time and power ON delay 1-10 sec ) OV/UV adjustable,neutral fail indicationD2 VCT 1 (Minilec) complete all as specified. 57 Supply and fix MS ERW pipe 150 MM dia 58 Cutting existing MS pipe line and taking branch connection for 150 MM dia MS pipe line including all specials and making good the surface to match with the existing including all earth work all as directed by Engr in charge . 59 M&L for cleaning underground tank located at Sec 62 and Sec 52by dewatering , remove sediments, cleaning the internal surface (Floor and side walls)with wire brush wash the tank with fresh water and applying a coat of synthetic enamel paint to MS ladder and write the date of cleaning complete all as specified . 60 M&L for cleaningterrace toptank located at Sec 23,Sec 52 and sec 62by dewatering , remove sediments, cleaning the internal surface (Floor and side walls)with wire brush wash the tank with fresh water and applying a coat of synthetic enamel paint to MS ladder and write the date of cleaning complete all as specified . 61 S & F in repair contactor MNX -40 including inter connection with other contactors and acessories , complete all as specified and directed. Make : L & T or equivalent 62 S & F in repair contactor MNX-32 including inter connection with other contactors and acessoriescomplete all as specified and directed. Make : L & T or equivalent 63 S & F in repair contactor MNX-95 with Aux contact 2NO+2NC including inter connection with other contractors and acessoriescomplete all as specified and directed. Make : L & T or equivalent 64 S & F in repair contactor MNX-110 with Aux contact 2NO+2NC including inter connection with other contractors and acessoriescomplete all as specified and directed. Make : L & T or equivalent 65 S&F in repair response indictor LED type complete all as specified and directed by Engineer -in-Charge.Make:Agni / FST / APPOLO / Siemons 66 S&F in repair fire Detectors Complying with and type certified to EN - 45 Addressable type smoke detector Photoelectric /Optical with base with self built intelligence as per IS: 11360 complete all as specified and directed.Make : AGNI, DAKSH/ APPOLO/ SIEMONS 67 Supply and fix in repairs MCP glass of suitable size3x4 or 4x4 complete all as specified and directed. Make : AGNI Surksha/Firex/Minimax 68 S&F in repair fire alarm sounders / hooder electronic type singe phase with sound level 62 to 120 DB complete all as specified and directed. Make : AGNI Surksha/Minimax/Philips/Meltron 69 Supply and fix in repairs of sealed lead acid batterys 12V, 130 Ah complete all as specified and directed. Make:Exide / Amron/ Okaya /AMCO 70 Comprehensive maintence, testing/Servicing and repair including preventive and periodical maint with renewals and replacement of defective parts of all existing fire protection and fire fightingsystem complete consisting of main fire control panels of 12.5HP , 75 HP Motorand Engine pump 62KWby necessary decarbonising ,cleaning, tightening & 100 % servicing of of all loose contact , sub panels,smoke/heat detector/response indicator Electric driven pump 55 KW, Diesel driven pump with 62 KW , Jockey pump, pressure switch, presure vessels, fire hydrents, hose reels, canvas hose pipes, gunmetals valves shut of nozzels sprenklers etc with control panel, starters and to keep Fire fighting system and fire alarm system auto runmode on variation in pressure to make 100% serviceability of the complete including checking, cleaning of fire detector by removing dust or dirt, cleaning of heavy greasy deposit if any, checking the connection of battaries, specific gravity of electrolyte, the alarm function control panel and indicating eqpts be checked by the opration of trigger device in each zone as described the system installed at Kamath Enclave offrs md accn (G+13 story Bldg) of CG Sec 52 of Noida every month during first or Last week as directed by Enginer -in-Charge. 71 (a) Cost of new components shall be paid for separately under relevant item of shchedule A (b) Contractors rep will visit minimum once in a month to every panel and take servicibility certificate duly signed by the users and MES Rep.Additional visit as and when required will not be paid as extra.(c) Cost of minor spares any typenot costing more than Rs 2500.00 per month in totaldeemed to be included in the quoted rate. (d) Payment will be processed on production of servicibilty certififace only and a panel recovery @ double the quoted rate will be charged for non carrying out of monthly serviceability check 72 NOTE:- (i) The rate quoted above shall be inclusive of minimum material as mentioned above and labour for unserviceable items, replacement of unserviceable eqpts and any other item not mentioned in the schedule but required to be replaced to make the Fire Fighting systemserviceable complete all as directed. (ii) The bidder are requested to inspect the FF system to accertain the servicebility of all the equipments if any itesms required to be repaired or replaced are deemed to be included in the quoted rate. (iii) The rates quoted shall be inclusive T&P required for carrying repairs and stationery for maintaining records such as daily ,fortnightly,monthly,quarterly and yearly maintenence, complaints book etc all as described by the Engr in charge. (iv) Normally maintaenance shall be carried out in day time but in case of emergency /breakdown, it should be attenend at odd hrs/night times andadditional manpower if required will be arranged by the contractor without any extra cost& rates. (v) The contractor shall provide the service of trained personnel, ITI qualified mechanic and oprator with 3 yrs exeperience & helper shall 12th pass and supervisor shall be minimum diploma certificate holder with 3 yrs exeperience in the trade. 73 (vi) The contractor shall carry out daily routine checking of the complete system and rectify the minor /major defects noticed immediately.One seprate register to be maintained as complaint registor received from department /user user signature shall be obtained after rectifying defects, each time.If complaints are not attended within 24 hours, following penalties will be imposed and deducted from payment to the contractors ;- contractor on the contractor quoted rates shall be deemed to include the cost of daily routine checking of complete system, rectification of defects and cleaning of installation from inside and outside with cleaning materials. Rs 500/- for not attending the complaint and keeping it pending beyond 24 hours per complaint per day.(vii) All consumable & maint material such as oil, lubricants, grease, thimbles etc will be deemed to be included in the rate quoted against above schedule.(viii) The contractor will use only genuine/original new parts as approved by original equipment manufacturer during repair and old unserviceable materials should be kept at site till verifiaction and proper register to be maintained complete all as specified and directed by Engr-in-charge.(ix) In case any rewinding of motor is required cost of disconnection transportation and reassembling cost shall be deemed to include the quoted rate. Other items such as copper winding wire bushes bearing etc shal be measured and paid seperately under relevent item of Sch A. 74 Comprehensive maintence, testing/Servicing and repair including preventive and periodical maint with renewals and replacement of defective parts of all existing fire protection and fire fightingsystem once in a month (During 1st or Last week) for 100% serviceabilty of the complete including checking of terrac pump with control panel staters, fire hydrent valves, hose reals, gate valves,to make 100% serviceability of the complete including checking, cleaning of fire fighting system by removing dust or dirt, cleaning of heavy greasy deposit if any,and indicating eqpts,meters be checked by the opration of trigger device in each at all floors as described the system installed at sailors md accn P-23 (G+07 story Bldg) of Coast Guard Sec 23of Noida as directed by Enginer -in-Charge. Note :- (a) Cost of new components shall be paid for separately under relevant item of shchedule A (b) Contractors rep will visit minimum once in a month to every panel and take servicibility certificate duly signed by the users and MES Rep.Additional visit as and when will requiored will not be paid as extra.(c) Cost of minor spares any typenot costing more than Rs 500 in totaldeemed to be included in the quoted rate.(d) Payment will be processed on production of servicibilty certififace only and a panel recovery @ double the quoted rate will be charged for non carrying out of monthly servibility check)(e)In case any rewinding of motor is required cost of disconnection transportation and reassembling cost shall be deemed to include the quoted rate. Other items such as copper winding wire bushes bearing etc shal be measured and paid seperately under relevent item of Sch A. 75 All as per item No 68 above bldg No P-24(G+ 06 story Bldg) at sec -23 complete all as specified and directed. 76 M&L for repair the MS pipe leackage of 80/100/150 MM pipe laid intrench/ on wall with arc welding including patch up MS piece plate with 5 MM tickness including all earth work and wrapping coating with anti-corrosive tapeand making good the surface all as directed by Engr in chage. 77 supply and replacement Tyre type rubber couplingfor 105 HP pump set 78 supply and replacementbearing 6317/C3 for 105 HP motor/pump set 79 supply and replacement mechanical seal for 105 HP Pump 80 supply and replacement pump bush for 105 HP Pump 81 supply and replacement motor bearing No 63015 82 supply and replacement motor bearing No 63012 83 supply and replacement mechanical seal for 75HP Pump 84 supply and replacement of pump bush for 75 HP Pump 85 supply and replacement motor bearing No 6308 86 supply and replacement mechanical seal for 20HP Pump 87 supply and replacement of pump bush for 20 HP Pump 88 Material and labour for rewinding with suitable guage of super enamelled copper wire, varnishing and drying using three coats of insulating varnishingincluding necessary insulating materials , cutting old burnt winding of any size and type completefor satisfactory running condition. 89 Taking down portable fire extinguisher Carbon di oxide type 4.5 KG capacity from the fire stand/ wall and refixing the same after refilling gasincluding replacement ofparts like pressure guage , nozzle,discharge tube etc andtesting all as specified and directed by Engr in charge. 90 Taking down wall mounted portable fire extinguisher Mono ammonium phosphate (ABC) 5 KG capacity of stored type with discharge tube and pressure guageand refixing the same after refilling including testing all as specified and directed by Engr in charge. 91 Taking down portable fire extinguisher Carbon di oxide type 22 KG capacity from the fire stand/ wall and refixing the same after refilling gasincluding replacement ofparts like pressure guage , nozzle,discharge tube etc and testing all as specified and directed by Engr in charge. 92 Taking down portable fire extinguisher mechanical foamtype 50 KG capacity from the fire stand/ wall and refixing the same after refilling gasincluding replacement ofparts like pressure guage , nozzle,discharge tube etc and testing all as specified and directed by Engr in charge. 93 Taking down portable fire extinguisher portable chemical fire extinguisher water(Gas pressure) type 09 Ltr capacity from the fire stand/ wall and refixing the same after refilling gasincluding replacement ofparts like pressure guage , nozzle,discharge tube etc and testing all as specified and directed by Engr in charge.
Contract Date: Jan 21, 2026 Contract Value : ₹ 8.09 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Uttar Pradesh View Result →
14.
Defence #9688149 AOC
Tender For Repair / Maintenance Of Misc B And R Works At Certain Bldgs At 24 Ed; 1 Demolition of brick masonry built in cement mortar complete all as specified and directed. 2 M & L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed. 3 M & L for brick work with sub class B bricks straight or curved on plan any radius as in half thick wall built in CM 1:4 complete all as specified and directed. 4 Taking down cement plaster on brick/stone surface of wall/RCC wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. 5 M & L for rendering 10 mm thick on fair face of brick walls or concrete surface in CM 1:6 complete finished even and smooth without using extra cement all as specified and directed. 6 M & L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:4 complete finished even and smooth without using extra cement all as specified and directed. 7 M & L for providing wall care putty on wall or ceiling not less than Avg 1.5 to 2 mm thick all as specified and directed. 8 M & L for preparation of new surface and applying two coats of Oil bound distemper on walls over a coat of primer complete all as specified and as directed by Engr-in-Charge. 9 M & L for preparation of new surface of wall including cornices and apply two coat of cement based paint over a coat of primer etc complete all as specified and directed by Engineer-in-Charge. 10 M & L for preparation of walls and applying one coat of 100% premium acrylic emulsion paint having VOC less than 25gm/ltr and UV resistance as per IS 15489:2004, alkali & fungal reistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon aditives at 1.43 ltr/20sqm all asspecified and directed by Engineer-in-Charge. 11 M&L for preparation of old surface and applying one coat of cement based paint complete all as specified and as directed by Engr-in-Charge. 12 M & L for preparation of old surface and applying one coat of Oil bound distemper on walls over a coat of primer complete all as specified and as directed by Engr-in-Charge. 13 M & L for preparation of old ceiling surface and applying one coat of oil bound distemper complete all as specified & directed by Engr-in-Charge. 14 M & L for preparation of old plastered surface of wall, complete removal of existing treatment and washing, rubbing down and stopping of distempered and painted surfaces and applying 2mm thick wall care putty on walls,ceiling etc. complete all as specified and directed by Engineer-in-Charge. 15 M & L and applying two coats of Oil bounded distemper on walls incl preparation of surfaces complete all as specified and directed by Engineer-in-Charge. 16 M&L anti termite treatment of post construction along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. 17 M&L anti termite treatment of post construction treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) and surfaces to be finished tomatch the existing floors finishes complete all as specified and directed. 18 M&L anti termite treatment of post construction of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them and matchthe existing complete all as specified and directed. 19 M&L anti termite treatment of post construction at points of contact of wood work,chaukhats etc. by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same and replugging them and matchthe existings complete all as specified and directed. 20 Taking down chowkhat with shutter without taking off shutter from chowkhatof any description exceeding 1.5 Sqm but not exceeding 4 Sqm each completeall as specified and directed 21 Ditto as above but re-fixing in same opening only ( refixing includes taking down, easing and adjust ing and also refixing builders hardware as required including renewal of unserviceable screws, etc) 22 Taking down chowkhat with shutter without taking off shutter from chowkhatof any description not exceeding 1.5 Sqm each completeall as specified and directed. 23 Ditto as above but re-fixing in same opening only( refixing includes taking down, easing and adjust ing and also refixing builders hardware as required including renewal of unserviceable screws, etc). 24 Taking down shutters of any description exc 1 sqm but n. exc. 2.00 sqm each completeall as specified and directed. 25 Taking down shutters of any description exc 2.00 sqm each completeall as specified and directed. 26 S & F for pressed steel door frames of size 125 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etccomplete all as specified and directed. 27 S & F for pressed steel door frames of size 165 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. 28 M & L for PCC type C-1 (1:3:6) using 12.5mm graded stone aggregate as in filling of hollow pressed steel frame etc complete all as specified and directed. 29 S & F second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. 30 Dismantling wrought iron or mild steel work of any description (i.e wind tie etc) not otherwise provided for etc complete all as specified and directed. 31 S & F rolled mild steel framed work as in doors or gates of angle or other section confirming to Fe 410 -W (Gde- E- 250) quality- A with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and directed. 32 S & F mild steel framed work such as window grills or guard bars, with ends of bars shouldered and or riveted or forged in to spikes, framed guard bar and similar work confirming to Fe 290.Gde-E-165 complete all as specified and directed. 33 S & F 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass, gauze, etc(without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads forscuring glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I,section 8, clause 8.24 (a); supplied and fitted to chowkatscomplete all as specified. 34 S & F30mm thick flush door shutters solid core construction, with block board core and plywood face panels, commercial type on both sidefixedto chowkhat all as specified and directed. 35 S&Fstainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 36 M & L PCC 1:2:4 type B1 using 20mm graded stone aggregate forfixing of hold fast etc complete all as specified and directed 37 S&F in butt hinges,100mm size medium weight, cold rolled mild steel, and fixed complete all as specified and directed 38 S&F extruded aluminium alloy handles, anodized 150 mm size complete all as specified and directed. 39 S&F aluminium anodised 300mm long sliding door bolt with hasp and staple (bolt type) and fixing clip and bolt extrude section or cast alloy type all as specified and directed. 40 S&F aluminum barrel tower bolt 150mm complete all as specified and directed 41 S & F 300mm MS ordinary rat tail rod pattern springs, incl roller and roller plate complete all as specified and directed 42 M & L floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 140 mm complete all as specified and directed. 43 S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 44 M & L for preparation of new or previously untreated surface of steel or steel based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. 45 M & L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 46 M & L for preparation of old wooden surface exceeding 10Cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. 47 M & L for preparation of old steel surface exceeding 10Cm width or girth and apply one coat of synthatic enamel paint complete all as specified and as directed by Engr-in-Charge. 48 S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tubecomplete all as specified and directed . 49 S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MSframe shall be covered with heat moulded plain colourPVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 and as directed by AGE(I)/Engineer-in-Charge 50 S & F butt hinges 75 mm mild steel hinges medium weight and fixed complete all as specified and directed. 51 S&F aluminium anodised 200mm long sliding door bolt with hasp and staple (bolt type) and fixing clip and bolt extrude section or cast alloy type all as specified and directed. 52 Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified and directed by Engr-in-charge. 53 M&L for providing75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate , finished even and fair incl. necessary use and waste of formwork etc complete all as specified and directed by Engr-in-charge. 54 M & L for 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor finished even and smooth without using extra cementincl. necessary use and waste of formwork etc complete all as specified and directed. 55 M & L for 75mm thickCement concrete type C-1, 1:3:6 (20mm graded stone aggregate) in Plinth Protection etc. complete all as specified and directed by Eng-in-Charge. 56 Dismantling stone slab floor, hearth or wall tilling including cement mortar bedding(but not backing), and rubbish offpremises etccomplete all as specified and directed. 57 M&L 20-22mm thick (of size not less than 55cm x55cm) machine cut, pripolished , Kota stone slab in floors over 20mm thick screed bed in mix 1:6 laid and jointed with grey cement to match the shade of slab including rubbing and polishing on surfaces of any description complete all as specified and directed by the Engineer-in-Charge. 58 M&L pripolished Kota stone slab 18-22mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick rendering cement mortar 1:3 and jointed with grey cement to match the shade of slab including rubbing and polishing on surfaces of any description,complete all as specified and directed by the Engineer-in-Charge. 59 M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and laid over and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and directed by the Engineer-in-Charge. 60 M & L for rounding to edges of stone slabs, such as steps, cooking platform and other similar situationscomplete all as specified and directed 61 Dismantling floor, hearth or wall tilling including cement mortar bedding(but not backing), and rubbish offpremises etccomplete all as specified and directed by Eng-in-Charge. 62 M & L coloured non-skid ceramic tiles joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed by Eng-in-Charge. 63 M & L coloured non-skid ceramic tiles joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqmas in skirting/dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed by Eng-in-Charge. 64 M&L coloured glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed by Eng-in-Charge. 65 M&L glazed ceramic coloured tiles 300mm x 200mm x 6to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed by Eng-in-Charge. 66 M&L joint free coloured non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. 67 M&L joint free coloured non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles match over and including 10 mm thick rendering in cement mortar 1:3 complete all as specified and directed. 68 Fixing only in repair Gratings, complete. 69 S&F in repair ss grating doom 125 mm dia with waste holecompleteall as specified. 70 Dismantling of cement concrete tiles/designer tiles of any desciption and any thickness in floors, laid, bedded and pointed in any mortar complete all as specifed and directed. 71 M&L providing chequered cement concrete coloured tiles glossy finish 25cm x 25cm x 22 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigmentlaid over and includingscreed bed or bedding layer 20 mm thick in CM 1:4 as in floors complete all as specified and directed. 72 M&L exterior grade heavy duty full body outer designer parking tiles 400x400x10mm, in floors etc. of colour and design as approved by Engr-in-Charge, set and jointed in neat cement slurry and pointed in white or coloured cement to match with existing one including 15mm thick screed bed in CM 1:6 complete all as specified . Make: Kajaria/Orient bell/H&R, Johnson or equivalent.
Contract Date: Feb 26, 2026 Contract Value : ₹ 9.13 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Uttar Pradesh View Result →
Karnataka View Result →
Punjab View Result →
Punjab View Result →
Punjab View Result →
19.
Defence #9356286 AOC
Tender For Repair And Renewal And Replacement Of Antistatic Flooring To Bldg No. 551/01 At Tpw-Ii, Inside Naval Dockyard, Visakhapatnam
Contract Date: Feb 21, 2026 Contract Value : ₹ 30.55 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 10
Andhra Pradesh View Result →
20.
Defence #9249486 Technical Bid
Addition / Alteration And Repair To OrS Married Accommodation ( Bldg No. Dsp / 845 & Dsp / 846 ) Of Hq 6 Sector Assam Rifles At Kashiram Basti, Dimapur.; 2 Demolishing Of Nominal Cement Concrete ( 1:3:6 ) Or Richer Mix Manually Or By Mechanical Means Including Disposal Of Materials Within 50M Lead As Per Direction Of Engineer - In- Charge. 3 Supplying And Filling In Plinth With Brick Bats Under Floors, Ramming, And Preparing The Surface Smooth Complete. 4 Providing And Laying Water Proofing Treatment In Sunken Portion Of Wcs, Bathroom Etc., By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying 0.40 Ltr Per Sqm In Two Layers In The Ratio 01 Ltr Of Water Proofing Cement Compound ( Dr Fixit ) In 1.50 Kg Of Cement. This Layer Will Be Allowed To Air Cure For 4 Hours Followed With Water Curing For 48 Hours. The Rate Includes Preparation Of Surface, Treatment And Sealing Of All Joints, Corners, Junctions Of Pipes And Masonry With Polymer Mixed Slurry. 5 15 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement 1:3 ( 1 Cement : 3 Fine Sand ) In Sunken Floor Including Vertical Surfaces. 6 Providing And Laying Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate Of 20 Mm Nominal Size ) In Floor. 7 Providing And Laying Of Ceramic Glazed Wall Tiles Of Approved Makein All Colours Of Any Size In Walls / Skirting Over 12 Mm Thick Bed Ofcm ( 1:3 ) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm Incl Pointing The Joints With White Cement Complete. 8 Providing And Laying Non Skid Ceramic Floor Tiles Of Size 300X300mm ( Thickness To Be Specified By The Manufacturer ) Of Approved Make, In All Colours And Shades Except White, Ivory, Grey Laid On 20Mm Thickcm 1:4 ( 1Cement :4 Coarse Sand ) , Incl Grouting The Joints With White Cement And Matching Pigments. Etc. Complete. 9 Hacking Of Cc Flooring Including Cleaning For Surface Etc. Complete As Per Direction Of The Engineer-In-Charge. 10 Providing And Laying Vitrified Floor Tiles In 600 X 600Mm Sizes ( Thickness To Be Specified By The Manufacturer ) Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete As Per Direction Of Site - In- Charge. . 11 Providing And Laying Vitrified Tiles In 600Mmx600mm ( Thickness To Be Specified By Manufacturer ) Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1Cement: 3 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3 Kg / Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete As Per Direction Of Site - In- Charge. 12 Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Incl Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge, Flamed Finish Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. 13 Dismantling Of Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Incl Disposal Of Rubbish To The Dumping Ground Within 50 Mtr Lead. 14 Repair To Plaster Of Thickness 12 Mm To 20 Mm In Patches Of Area 2.5 Sqm And Under Incl Cutting The Patch In Proper Shape, Racking Out Joints And Plastering The Surface Of The Walls, Including Disposal Of Rubbish To The Dumping Ground Within 50M Lead Etc. Complete With Cm 1:4 ( 1 Cement : 4 Coarse Sand ) . 15 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade On New Work ( Two Or More Coats ) Over And Including Water Thinnable Priming Coat With Cement Primer. 16 Distempering With 1St Quality Acrylic Distemper ( Ready Made ) Having Voc Content Less Than 50 Gm Per Ltr. Of Approved Manufacturer And Of Required Shade And Colour Complete. As Per ManufacturerS Specificationon On Old Work ( One Or More Coats ) Incl Preparation Of Old Surface By Removing Old Paint By Scrapping, Sand Papering Incl Necessary Repairs To Scratches Etc Complete On Walls. 17 Providing And Finishing With Two Or More Coats On New Work Applied @ 1.67 Ltr / 10 Sqm With Acrylic Smooth Exterior Paintof Required Shadeincluding Priming Coat Of Exterior Primer Applied & 2.20Kg / 10Sqm. 18 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade On Old Work ( One Or More Coat Applied @ 0.90 Ltr / 10 Sqm ) On Existing Cement Paint Surface, Including Removing Of Old Water Proofing Cement Paint By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc Complete. 19 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 20 Providing And Painting One Or More Coats On Old Work With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade. 21 Half Brick Work With Common Burnt Clay F.P.S ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure In Plinth Level In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) . 22 Providing And Laying 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Finished With A Floating Coat Of Neat Cement Of Mix 1:4 ( 1 Cement : 4 Fine Sand ) . 23 Providing And Laying In Position Cement Concrete Of 1:3:6 With 20 Mm Graded Stone Aggregates Including Centering And Shuttering Etccomplete In Drain. 24 Providing And Making Plinth Protection 50 Mm Thick Of Cement Concrete ( 1:3:6 ) With Stone Aggr 20 Mm Nominal Size ) Over 75 Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Finishing The Top Smooth. 25 Providing And Fixing Fly Proof Wire Gauge To Windows, Doors And Ventilators With Ms Flat 15X3mm And Nuts & Bolts Completeof 0.63Mm Dia Wire And 1.4 Aperture On Both Sides. 26 Renewing Glass Panes With Putty And Nails Wherever Necessary Including Racking Out The Old Putty Of Float Glass Panes Of Thickness 4 Mm. 27 Renewal Of Old Putty Of Glass Panes ( Length ) 28 Providing And Fixing 35Mm Thick Factory Made Laminated Flush Door Shutters Decorative Type, Core Of Block Boards Construction With Frame Of 1St Class Hard Wood Including Stainless Steel Butt Hinges With Screws Etc Complete. 29 Providing And Fixing 35Mm Thick Of Second Class Teak Wood Wire Gauge Shutters Using Galvanized M.S. Wire Gauge Of Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia 0.63 Mm, For Doors, Windows And Clerestory Windows With Hinges And Necessary Screws 30 Providing And Fixing To Existing Door Frames Of 25 Mm Thick Pvc Flush Door Shutters Made Out Of A One Piece Multi Chamber Extruded Pvc Section Of The Size Of 762 Mm X 25 Mm Or Less As Per Requirement With An Average Wall Thickness Of 1 Mm ( ± 0.3 Mm ) . Core Of The Door Shutter Should Be Filled With High Density Polyurethane Foam. Door Shutter Shall Be Reinforced With Special Polymeric Reinforcements As Per Manufacturer’S Specification And Direction Of Engineer-In-Charge To Take Up Necessary Hardware And Fixtures. 31 Dismantling Doors Shutters Including Chowkhats, Holdfasts Etc Complete Of Area3 Sqm And Below. 32 Providing And Fixing Aluminium Handles, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete Of 125Mm Length. 33 Providing And Fixing Aluminium Handles Of Size : 100 Mm, Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete 34 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete Of Size 150X10mm. 35 Providing And Fixing Aluminium Tower Bolts Of Size : 100X10 Mm With Necessary Screws Etc. Complete. 36 Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) , Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete Of Size 250X16mm. 37 Dismantling Of Flushing Cistern Of All Types ( C.I. / Pvc / Vitrious China ) , Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 M Lead. 38 Providing And Fixing P.V.C. Low Level Flushing Cistern With Manually Controlled Device ( Handle Lever ) Of Capacity 10 Litre, White Colour, With All Fittings And Fixtures Complete. 39 Providing & Fixing Long Pattern W.C Pan Of Size 580X440 Mm White Vitreous China Water Closet Squatting Pan ( Indian Type ) Along With S Or P Trap Including Dismantling Of Old Wc Seat And S Or P Trap At Site Complete With All Operations Including All Necessary Materials, Labour And Disposal Of Dismantled Material I / C Malba, All Complete As Per The Direction Of Engineer-In Charge. 40 Dismantling W.C. Pan Of All Sizes Including Disposal Of Dismantled Materials I / C Malba All Complete As Per Directions Of Engineer-In-Charge. 41 Providing And Fixing Of 15 Mm Nominal Outer Dia Pipes Cpvc Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I / C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Etc Complete. 42 Dismantling 15 To 40 Mm Dia G.I. Pipe Including Stacking Of Dismantled Pipes ( Within 50 Metres Lead ) As Per Direction Of Engineerin- Charge. 43 Providing And Fixing 25 Mm Dia Nominal Bore G.I. Pipes Complete With G.I. Fittings And Clamps, I / C Cutting And Making Good The Walls Etc. 44 Providing And Fixing Of 15Mm Nominal Bore Cp Brass Bib Cock Of Approved Quality. 45 Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality ( Screwed End ) Of 25 Mm Nominal Bore. 46 Providing And Fixing 15Mm Nominal Bore C.P. Brass Angle Valve For Basin Mixer, Flushing Cisternand Geyser Points Of Approved Quality. 47 Providing And Fixing 600X450mm Beveled Edge Mirror Of Superior Glass ( Of Approved Quality ) Complete With 6 Mm Thick Hard Board Backing Fixed To Wooden Cleats With Cp Brass Screws And Washers Complete.. 48 Providing And Fixing On Wall Unplasticised Rigid Pvc Pipes Incl Jointing With Seal Ring, Single Socketed Pipes Of 110 Mm Dia. 49 Providing And Fixing On Wall Unplasticised Rigid Pvc Pipes Incl Jointing With Seal Ring, Single Socketed Pipes Of 75 Mm Dia. 50 Providing And Fixing Of 150Mm Dia Cp Brass Shower Rose With 15 Or 20Mm Inlet Of Approved Quality. 51 Schedule Of Credit:-Unserviceable Wooden Door Shutters Of Any Sizes. 52 Unserviceablefly Proof Door Shutters Of Any Sizes. 53 Unserviceablepvc Door Shutter Of Any Sizes. 54 Unserviceablepvc Flushing Cister Of Any Capacity. 55 Unserviceable25mm Nominal Dia Gi Pipe. 56 Unserviceable15mm Nominal Dia Gi Pipe.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Nagaland View Result →
21.
Defence #9061490 AOC
Tender For Special Repair To Building No P-90 In The Aor Of Age B R Iii Under Ge 874 Ews Job No W Sr Bldg Xxi Zangli 2025-26.; 1 Dismantling plain or corrugated steel sheeting,any gauge ,thickness including Nainital or similar patternroof covering complete all as specified and directed. 2 S&F pre- painted galvatumealuminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 3 Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 4 Demolition of stone slabs and tiles of any laid bedded and pointed in any mortardescription or thickness in floors, wallsaprons etc. complete all as specified and directed. 5 M&L 75 mm thick PCC 1:3:6, type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection finished even aned fair without using extra cement complete all as specified and directed. 6 M&L for 50 mm mm thick PCC 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) for floor complete all as specified. 7 Dismantling floor ,hearth or wall tilling including cement mortar bedding removing serviceble tile to rubbish of the premises complete all as specified and directed. 8 M&L machine cut Kota stone flloring 20-25mm thick over 20mm thick cement screed 1: 6 base alid and jointed with grey cement slurry mixed with pigment match the shade of the slab including rubbing and polishing complete all as specifed and directed. 9 M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as above as specifiedover 10mm thick rendering in Cement Mortar 1:4 complete all as specified & directed. 10 M&L for cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) 25 mm thick as in sub basenover rammed earth complete all as specified. 11 M&L for non skid ceramic coloured tiles 7-8 mm thick, area exc 0.11sqm but nexc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to matchthe colour oftile on 15mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed. 12 M & L forGlazed ceramic coloured tiles (450 x 300 x7mm)thick, as in vertical surface such as in skriting and dado etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over 10mm thick rendering in Cement Mortar 1:4 complete all as specified & directed. 13 Dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed. 14 M&L plywood grade BWR type BB, 9 mm thick fixed with nails to timber frame work in ceiling complete all as specified and directed. 15 M&Lplain fillets 2nd class soft wood of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section , clean swan, secured nails complete all as specified and directed. 16 M&L second class soft wood in scantling clean swan complete all as specified and directed. 17 M&L for Preparation of newly un treated surfaces andapplyingtwo coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and directed. 18 M&L for Preparation of old painted surfaces andapplyingone coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed anddirected. 19 Taking down cement or cement lime plaster on brick or stone walls, any discription, including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed. 20 Supply only integral water proofing compound complete all as specified and directed. 21 M&L for 15mm thick rendering in cement mortar 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth without using extra cement complete all as specified and directed. 22 M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces orother than fair face of brick work in CM 1:4 and finishing in wall complete all as specified and directed by Engr-in-Charge. 23 M&L for rendering 10 mm thick on fair facesof brick work or concrete surfaces orother than fair face of brick work in CM 1 : 4 and finishing in cellingcomplete all as specified and directed by Engr-in-Charge. 24 M&L for preparation New or undecorated surface of walls and applyingtwo coats of cement base paint over a coat of alkali resistant primer complete all as specifed and directed. 25 M&L for preparation old or undecorated surface of walls and applyingtwo coats of cement base paint over a coat of alkali resistant primer complete all as specifed and directed. 26 M&L for preparation of old plastered surfaces of wall and applying two coat of oil bound distemperall as specified. 27 M&L for preparation of New plastered surfaces of wall and applying two coat of oil bound distemperall as specified. 28 M&L for preparation old or undecorated surface of Celling and applyingtwo coats of White Washcomplete all as specifed and directed. 29 M&L for preparation new or undecorated surface of walls and applyingtwo coats of White Washcomplete all as specifed and directed. 30 M&Lfixed in repairs 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & otherside balancing white lamination, fixed with screws to timber framework including external teak wood lipping 6 mm thick, complete all as specified and directed. 31 Taking down chowkat with shutters exc.1.5 Sqm but n exc.4 Sqm (without taking off shutters from chowkhat) complete all as specified and directed. 32 Taking down chowkat with shutters n. exc.1.5Sqm (without taking off shutters from chowkhat) complete all as specified and directed. 33 Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 34 Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) 35 S&F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid all as specified. 36 Plain, framed, panelled shutters second class soft wood 35 mm thick(any number of panels), with panels of timber flat on both sides(feather edged), or of veneered particle board medium density, wood particle board with commercial faceveneers: supplied and fitted to chowkats 37 S&F glazed and skeleton shutters, second class soft wood 30 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. 38 Hacking out old broken glass (any thickness, size quality of description) from wooden frames or stone, concrete or brick sorrounds, glazad with putty or fixed with beeds complete all as specified. 39 03mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified. 40 S&F 100 mm long butt hinges extruded aluminium anodised complete all as specified and directed. 41 S&F 75 mm size mild steel butt hingesmedium weightcomplete all as specified and directed. 42 S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. 43 S&F 100 mm long aluminium anodised barrel tower bolt of exturded section complete all as specified and directed. 44 S&F aluminium anodised alloy handles fabricated type 150mm size of handle complete all as specified and directed. 45 S&F 100 mm long aluminium handles cast type anodised complete all as specified and directed. 46 S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed. 47 S & F in Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. 48 S&F for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. inclof fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed. 49 S&F in repair Urinal spreader of CP any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. 50 S&F in repairs Vitreous China Ware Wash hand basin white flat back size 550mmx400mm including pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm diacomplete all as specified. 51 S&F inrepairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) in all respect complete all as specified and directed. 52 S&F in repairHealth flucet (ABS Body) mild steel Cr plated suitable for 15 mm dia pipe with 1.25 m long tube complete all as specified and directed. 53 S&F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and directed 54 S&F in repairsPVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr capwhite with flush pipe & all fittingcomplete all as specified. 55 S&F in repairs Bib taps cast copper alloy ,chromium plated,with crutch or butterfly handle screwed down screwed for iron pipe or brass ferruleof 15mm bore, in repair complete all as specified and directed. 56 S&F in repairs pillar tap cast copper alloy, fancy type with capstan headschromium platedscrewed downwith high pressure with orwithout lettered hotor cold with long screwed, shanksand fly nutsscrewed for iron pipe 15mm dia complete all as specified and directed. 57 S&F Stop valves cast copper alloy,fancy type ,chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unionsof 15mm bore pipe,in repair complete all as specified and directed. 58 S&F in repairs two way angular stop cock chromium plated 15mm dia complete all as specified and as directed by Engr-in-Charge. Make : Cera/Jaquar/Essco or its equivalent. 59 S&F ball valves, high pressure,with polythene float and flynut complete,20mm bore ,in repair complete all as specified and directed. 60 S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends in repair complete all as specified and directed. 61 S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples,complete all as specified in SSR Part I. complete all as specified and directed. 62 S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified. 63 S&F PVC connection 15 mm length 450 mm fixed, in repairs complete all as specified and directed. 64 Taking up or down 15mm diaGI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 65 Taking up or down 20mm diaGI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 66 S&F GI tube 15 mm diamedium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and directed. 67 S&F GI tube 20 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and directed. 68 S&F 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed. 69 Demolition of Brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashler facing, dressed stonework and precast concrete articles 70 M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 Complete all as specified and directed. 71 S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed. 72 S&F in repairTowel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed. 73 S&F lagging to 15mm bore pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed SNAPON pipe section of density 144 Kg cum conforming to IS 9842 alongwith chiken mesh wire netting 25 guage , 20 mm mesh fixed in repairs complete all as specified and directed. 74 All as per ser item No 73 here-in-before but 20mm bore pipe complete all as specified and directed. 75 Dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and directed. 76 S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified.( PVC Pipe 2kg/cm2 ,Thickness 1.8mm to 3.8 mm) 77 S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed,fixed to wall & Floor complete all as specified.( PVC Pipe 2kg/cm2 ,Thickness 1.8mm to 3.8 mm) 78 S&F 110mm bore PVC (SWR) bend or tee orradius complete all as specified. 79 M&L for PVC (SWR) WC connector with lip ring 110mm complete all as specified and directed. 80 M&L for PVC (SWR) vent cowl for 75 mm dia all as specified. 81 Treatement for sunken portion is as follows :-(a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed.(b) Maintain the Sunken to a slope of 1:40 outward with 32mm dia GI pipespout projecting at least 150 mm beyond outer face of wall.(c) Top of the sunken floor slabs shall be laid to a slope 1:40. Thesurface of RCC slab shall be made even and smooth by using extra cement while the concreteis still green. Concave fillet in PCC (1:2:4) type B0 of radius 75 mm shall be providedat the junctions of RCC slab and adjoining walls. (d) M&L .Floor and side walls upto the finished floor level shall be plastered with 15 mm thick CM (1:4) mixed with water proofing compound @ 3% by weight ofcement. Over plastered surfaces,M&L for applyin evenlytwo coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces a layer of APP based polymeric membrane not less than 3mmthick, weighing not less than 3 kg per sqm, reinforced withpolyster non- wovenfabric (weighing not less than 150 gm per square metre) shall be laid by torchapplication. Side overlaps shall be 100mm and the ends laps shallbe 150mm andoverlap joints shall also be sealed by torch application.(e) The sunken portion shall be filled with lean cement concrete (1:5:10), typeE2 using 40 mm brick aggregate after carrying out satisfactory testing of CI pipes /joints and slabs / walls by filling water for 72 hours. The sunken portion ofNahani / floor trap and pipe joints shall be embedded in PCC (1:3:6) blocks.(f)32 mm dia GI spout shall be provided to drain out leakage, if any. 82 M&l For Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction ofparapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq.m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered (area of flashings, etc., shall be added tothe roof area).a)APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified 83 S&F Vitreous china urinal partition white of size 310x700 mm. 84 M&L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement 85 Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed. 86 Taking downMCB DBs complete with MCBs/Isolator etc removing materials from siteand making good disturbed surface of walls, floors etc. complete all as specified and directed. 87 Disconnecting unserviceable sub main wiring/service connection of any size and including steel conduit and accessories and removing from site and making good the disturbed surfaces complete all as specified and directed 88 Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi stranded flexible cable (green color) as earth lead in and including cable 1100 volts grade including casing and capping (ISI marked) for one light/ fan point including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover including cutting chases to wall making good the disturbed surfaces to match with theexisting specification complete all as specified. 89 All as per ser item No 89 here-in- before but wiring with 1.5 sqmm copper wire ( FR-LS-H)and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board. 90 All as per ser item No 89 here-in- before but wiring with 1.5 sqmm copper wire ( FR-LS-H)and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board. 91 All as per ser item No 89 here-in- before but wiring with 2.5 sqmm copper wire ( FR-LS-H)and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board. 92 S&Fswitch piano flush button single pole, one way 5 amps complete all as specified and directed. 93 S&F switchsocket combination 2 in 1,5A, flush type . 94 S&F switchsocket combination 5 pin 16A, flush type . 95 S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 96 S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 97 S&F Exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230v , 50HZ , RPM 1200, Copper winding of sweep 300mm, with 2 years warrenty complete all as specified and directed. 98 S&F ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed. 99 S&F 09W/10W Bulk head liminiares including LED light driver holder connectingup with three core flexible copper conductor cable of suitable size complete all as specified and directed. 100 S&F LED Bulb 9 Watt all as specified and directed by Engr-in-Charge. 101 M&LLamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed. 102 S&F MCBs single pole 240 volts 6 to 32Amps 10 KA Ccurve series, all as specified and as directed by Engr -in-Charge. 103 S&F of MCB SPN, 240 volt, 63 Amp capacity, 10 KA, C curve .all as specified and as directed by Engr -in-Charge. 104 S&F of distribution board single pole & neutral with 200 Amps rated bus bar,for double door IP-42 DBs ,made outof sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCBs and isolators complete in all fixing material/accessories etc complete all as specified and directed. 105 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x2.5 sq. mm + 1x1.5 sq. mm earth wire complete all as specified and directed. 106 Earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level)with top edge lead of the platenot less than 1.5 mtr below normal ground level, connected galvanised earrth lead wire 4.0mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shoen in Electrical plate No 3 connected to earthing test point all as specified or indicated including earth work complete and testing on completion complete all as specified and directed.. 107 S&F electric water Heater, storage type steel body with copper inner tank and and heating element upto 2 KW capacity 50 liter , BEE 5 Star rated complete with all accesries such as safety valve, thermostate, NRV, connection piece etc. 108 Taking down carefully copper/ aluminium unserviceable/ perished cable any size ,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed. 109 Taking downMCCB and DBs complete etc removing materials from siteand making good disturbed surface of walls, floors etc. complete all as specified and directed. 110 S&F with renewal of MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA, all as specified and directed by Engr-in-Charge. 111 Supply, Laying , jointing and testing with renewal of LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable 35 sqmm3.5 core, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizesand aluminium lugs for connection complete all as specified and directed. 112 Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation ,laying of cables/pipes/poles etc., and getting out in hard/densesoil complete all as specified and directed. 113 Returning filling in including spreading levelling watering and well ramming in layers not exceeding of 25 cm thick in soft/loose soil complete all as specified and directed 114 Removal of surplus soil as obtained from excavation to a distance not exc. 50 Mtr and depositing where directed at a level not exc. 1.5 Mtr above the starting point all as specified and directed. 115 Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed by Engineer-in-chargeNote:-Punned thickness only shall be measured and paid. 116 Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class B laid in trenches flat complete all as specified and directed by Engineer-in-charge. 117 S&F light grade, galvanised 50 mm bore mild steel pipe / tubing, complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitablemild steel clamps , bolts , nuts and washers complete all as specified and directed as for cable proction of following sizes:-.(Note:- Excavation & earth work shall be measured and paidfor separately under appropriate item of this schedule ):-
Contract Date: Feb 02, 2026 Contract Value : ₹ 55.17 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 7
Jammu And Kashmir View Result →
22.
Defence #8641960 AOC
Tender For Repair And Maint Of Fire Fighting System Alongwith Connected Items At Tbrl Range Ramgarh; 1 Testing / Servicing/ Comprehensive maintenance and repair including renewal/ replacement of defective parts of all existing fire fighting system installed at various location once in a month for 100% serviceability of the complete including checking of sprinklers, fire hydrant, existing valve, electric panel and all types of pump, checking the connection of batteries, specific gravity of electrolyte, wiring connection of control panel and indicating eqpt be checked by the operation of trigger device of the fire fighting system and make it functional by replacing the defective / unserviceable parts complete all as specified and directed.NOTE:- (i)Cost of any size single core cable required for panel shall be included in quoted rate and other components/parts shall be paid for separately under relevant item of schedule A as supply only(ii)Contractors rep will visit minimum once in a month to every fire fighting system . Additional visit as and when required shall not be paid as extra. Fire fighting system installed for ETF bldg at TBRL Range Ramgarh. 2 All as per serial item no 1 above but for SWS bldg , AAG zone -ditto- 3 Supply only industrial pressure switch all as per existing and complete all as specified and directed. 4 Supply only MCCB, 3 pole, rating 100 amps, breaking capacity 16 KA, 415 volts, complete all as specified and directed. 5 Supply only MCCB, 3 pole, rating 200 amps, breaking capacity 36 KA, 415 volts, complete all as specified and directed. 6 Supply only three pole SIEMENS 3TF47, 63-90 amp power contactorcomplete all as specified and directed. 7 Supply only three pole ABB A 75-30,75 amp contactor complete all as specified and directed. 8 Supply only three pole ABB A 30-30,30 amp contactor complete all as specified and as directed. 9 Supply only three phase motor protection circuit breakers for protection up to 5 HP centrifugal pump as per existing complete all as specified and directed. 10 Supply only thermal over load relays 14 - 23 amp range, direct mounting suitable for MNX contactor complete all as specified and directed. 11 Supply only over load relays 45 - 75 amp range, direct mounting suitable for MNX contactor complete all as specified and directed. 12 Supply only electronic timer multirange as per existing complete all as specified and directed. 13 Supply only single phase preventor with voltage monitoring relay 3 phase 415V complete all as specified and directed. 14 Supply only push button with indicator (set of three R Y B) for panels complete all as specified and directed. 15 Supply only 3 phase voltmeter analogy type complete all as per specified and directed. 16 Supply only 3 phase ammeter 0 to 100 A, analogy type complete all as per specified and directed. 17 Supply only selector switch complete all as specified and directed. 18 Supply only multifunction meter digital type for voltage and amp suitable for 3 phase 415 V existing complete all as specified and directed. 19 Supply and fixing for pressure gauges pressure 0-21 Kg/sqcm type suitable for existing suction and discharge water supply pipe line including suitable fixing arrangement complete all as specified and directed 20 Excavation in trenches in soft / loose soil n.exc 1.5 m wide n.exc 1.5 m deep getting out soil complete all as specified and directed. 21 Returning filling in including spreading levelling well ramming in layers n.exc 25 cm thick in layers complete all as specified and directed. 22 Removing excavated material (soil) n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. 23 Material and labour for road cutting laying of pipe not exceeding 90 cm below ground level not exceeding 1 meter complete all as specified and directed. 24 Material and labour for cement concrete type C2 1:3:6(40 mm graded aggregate) for making good to disturbed surface of road etc complete all as specified and directed. 25 Taking Up MS/CI pipe 150 mm water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed. 26 Taking Up MS/GI/CI pipe 100 mm water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed. 27 Taking Up MS/GI/CI pipe 80 /50 mm water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed. 28 Supply and fixing in replacement of MS ERW pipe on floor/trench/wall of dia 150 mm including fittings (Tee, elbow, flange, nut, bolts) complete all as specified and directed.Note : Earthwork shall be measure and paid for separately 29 Supply and fixing in repair galvanised tube medium grade, with all fitting and fixed complete to walls and ceilings or laid in trenches/floors, bore of pipe 100 mmdia complete all as specified and directed. 30 Supply and fixing in repair galvanised tube medium grade, with all fitting and fixed complete to walls and ceilings or laid in trenches/floors, bore of pipe 80 mm dia complete all as specified and directed. 31 Supply and fixing in repair galvanised tube medium grade, with all fitting and fixed complete to walls and ceilings or laid in trenches/floors, bore of pipe 50 mm dia complete all as specified and directed. 32 Supply and fixing for 15 m long RRL fire hose63 mm dia, type Aas per IS 636with necessary instantaneous spring lock type coupling at the ends to match with landing valve/ hose pipe/ branch pipe with gun metal male and female coupling conforming to IS 903 complete all as specified and directed. 33 Supply and fixing for 30 m long RRL fire hose63 mm dia, type Aas per IS 636with necessary instantaneous spring lock type coupling at the ends to match with landing valve/ hose pipe/branch pipe with gun metal male and female coupling conforming to IS 903 complete all as specified and directed. 34 Supply and fixing for 63 MM dia branch pipe gun metal instantaneous inlet and made 15 mm bore nozzle short complete all as specified and directed. 35 Supply and fixing for swinging hose reel hydraulic rubber braided hose of 36 m long and dia 20 mm with ABS nozzle PVC, wall bracket with U shaped CI reel carrier finished in Red and black enamelled paint incl taking dismantling of old one complete all as specified and directed. 36 Supply and fixing for gun metal fire hydrant valve 63 mm dia, single headed with flanged inlet and instantaneous out let on the existing stand post with brass nipple, including necessary bolts, nuts and washers including taking down unserviceable old one complete all as specified and directed. 37 Supply and fixing for gun metal fire hydrant 63 mm dia, double header with flanged inlet and instantaneous out let on the existing stand post with brass nipple, including necessary bolts, nuts and washers including taking down unserviceable old one complete all as specified and directed. 38 Supply and fixing in repair hose male s/s coupling 63 mm dia for hydrant valve ISI marked including taking down old unserviceable one complete all as specified and directed. 39 Supply and fixing in repair hose female s/s coupling 63mm dia for hydrant valve ISI marked including taking down old unserviceable one complete all as specified and directed. 40 Supply and fixing for cast iron double flanged type sluice valve 80 mm dia bore classPN 1.6 , ISI marked complete with nuts , bolts and washers and rubber sheet packing incl dismantling of old one complete all as specified and directed. 41 Supply and fixing for cast iron double flanged type sluice valve 100 mm dia bore classPN 1.6 , ISI marked complete with nuts , bolts and washers and rubber sheet packing incl dismantling of old one complete all as specified and directed. 42 Supply and fixing for cast iron double flanged type sluice valve 150 mm dia bore classPN 1.6 , ISI marked complete with nuts , bolts and washers and rubber sheet packing incl dismantling of old one complete all as specified and directed. 43 Supply and fixing in repair butterfly valves of 80 mm sizes rated including connected accessories such as rubber gasket, nut bolts etc, complete all as specified and directed. 44 Supply and fixing in repair butterfly valves of 150 mm sizes rated including connected accessories such as rubber gasket, nut bolts etc, complete all as specified and directed. 45 Supply and fixing in repair non return butterfly valves of 150 mm sizes including connected accessories such as rubber gasket, nut bolts etc complete all as specified and directed. 46 Supply and fixing in repair non return butterfly valves of 80 mm sizes including connected accessories such as rubber gasket, nut bolts etc, complete all as specified and directed. 47 Supply and fixing for gun metal gate / globe valve with iron wheel head, screwed both ends suitable for fixing with pipe of outer dia 50 mm and taking down old unserviceable valves complete all as specified and directed. 48 Supply and fixing in replacement 2500 ltr capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical and closed top) ISI marked placed on platform on roof all as specified in SSR Part - 1 complete including wash out pipe of 50mm dia GI medium grade pipe 50cm long complete all as directed and specified. 49 Supply and fixing in replacement hose box made of 18 gauge MS sheet with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red outside and brilliant white inside yard complete all specified and directed. 50 Material and labour for cleaning and washing underground sump reservoir of capacity up to 25000 gallon, disconnecting the inlet and outlet valves, cleaning the tank by blocking the water supply system including removing sludge/scale /sediments etc from bed level and scrapping the floor and wall surfaces with wire brush and cleaning with potassium permanganate (KMNO4) solution at least three times to remove oily surfaces from internal floor and wall of the tank and finally cleaning with fresh water and applying cement wash on walls including re-fixing of inlet and outlet valves and normalizing the water supply by opening valves after allowing sufficient drying time, including writing date of cleaning with synthetic enamel paint as cleaned on complete all as specified and directed. Note: Quoted rate shall deemed to be inclusive of cost of potassium permanganate, scaffolding (if required) and disposal of sludge/scale/sediments up to a distance of n. exc 50m from work site) 51 Material and labour for conducting ‘B’ check ofdiesel engine capacities upto 75 BHP to carry out maintenance/servicing as given below complete all as specified and directed:- (i) Change of diesel filter ,oil filter, air filter, replacement of engine oil etc.(ii) Check and clean engine,battery, etc.(iii) Tightening of all nuts & bolts of diesel engine set and its accessories.(iv)Check for any diesel leakage from any point and rectify if observed.(v) Check and adjust fan belt tension, replace the fan belts if found damaged.(vi) Check leakage of smoke from exhaust system/silencer, repair if required.(vii)Check electrical connections of engine. The wiring shall be maintained properly and engine starting system from engine instrument panel is to be kept in order. (viii)Check and tighten the AVM pads nuts and bolts, change AVM pads if found damaged to be provided by contractor.(ix)Check exhaust pipe, flange and lagging Repair if found damaged.(x)Oiling, Greasing and checking for proper & smooth functioning. etcand refitting, testing on load complete (Note 1. :- Price forspare parts and Fuel Filter, Oil filter ,water separator filter, Head/filter Gasket, Air Filter, engine oil and coolent shall be measured and paid for separately under respective items of schedule as supply only. 52 Supply only new fuel filter elements with O ring for diesel engine capacities upto 75 BHP complete all as specified and directed. 53 Supply only new lubricant oil filter elements with O ring for diesel engine capacities upto 75 BHP complete all as specified and directed. 54 Supply only new air filter (both outer & inner) element with O ringfordiesel engine capacities upto 75 BHP complete all as specified and directed. 55 Supply only of engine oil 15W40 grade for diesel engine set complete all as specified and directed. 56 Supply only of coolant for diesel engine set complete all as specified and directed 57 Supply only v-belt for diesel engine upto 75 BHP as per existing complete all as per specified and directed 58 Material and labours for dismantling of exhaust pipe of silencer, cleaning of silencer to remove carbon deposit inside exhaust pipe and refixing including replacement of worn out rubber gasket packing and nut, bolts including replacement of asbestos rope 20mm complete all as specified and directed. 59 Dismantling the fuel injection/PT pump segregating serviceable and semi/unserviceable parts, replace all unserviceable parts and cleaning serviceable parts, drying, lubricating, reassembling the FIP/PT pump with cleaned serviceable parts along with new parts as per requirement, calibration and testing on completion with computerised testing equipment complete all as specified and directed. 60 Material and labour forcleaning of diesel tank of DG set of any capacity including replacement of worn out pipe line and measuring scale and fixing in original position and make it leak proof with necessary clamps complete all as specified and directed 61 Supply fixing in repair battery lead (Red/Black colour), PVC insulated multistranded, copper conductor 70 sqmm, each 1.25 m long,duly fixed with brass clamps, copper lugs complete all as specified and directed. 62 Supply only of oil pressure gauge ISI mark complete all as specified and directed. 63 Supply only of oil temperature gauge ISI mark complete all as specified and directed. 64 Supply only of fuel gauge meter ISI mark operated on12 V DC complete all as specified and directed. 65 Supply and replacement of compact type battery charger unitsuitable for charging 01 bty ,12 V 180 AH complete all as specified and directed with 2m copper leads -02 Nos & brass clamps complete all as specified and directed. 66 Dismantling of self starter 12V DC by disconnecting battery connection , taking out to civil workshop for carrying out following repair work and refixing including testing complete all as specified and directedNote:- (i) Rewinding of armature & field coil.(ii) replacement of Carbon brush and solenoid switch (iii) replacement of gear assembly . 67 Material and labour for disconnecting of suction and delivery pipe and electric connections, from three phase centrifugal pump sets motor and dismantling the pump sets complete from the foundation, strip opening the unserviceable motor at site to locate the fault and transporting to the local work shop. strip opening the motor and cutting/removing burnt out winding and rewinding the motor with as per existing original wire gauge super enamelled copper wire including high quality ‘F class insulating material with heat resistant sleeves, sealing compound and varnishing and heating the stator upto varnish fully dry and testing the motor at work shop to the satisfaction. Coupled the motor with pump and installed at site as per existing position. Testing the pump set after completion of work complete all as specified and directed Note - (i) Burnt out rewinding wire shall be property of contractor through schedule of credit. 68 Supply only copper winding wire with supper enamelled copper wire of suitable gauge as per capacity/Rating of motor work complete all as specified and directed. 69 Disconnecting suction and delivery pipe lines from unserviceable centrifugal pump , separate pump from 3 phase motor and transporting to the local workshop ,dismantling the pump, cleaning , replacing the worn out part like - ball bearing , gun metal bush , pump shaft repair by lathe,repairing of impeller by grinding / polishing ,water sealant of any typeand necessary gland packing etc.which ever be requiredto making 100 % serviceable of pump sets coupledwith motor and installed at site as per existingincluding testing after complete repairs of work complete all as specified and directed at site of capacity 15/20/50 HP 70 Supply and fixing for strainer for suction size 150 mm dia including nut, bolt & washer work complete all as specified and directed 71 Material and labours for painting to outer side of the existing fire fighting equipment’s, pipe lines bytwo coat of synthetic enamelled paint of existing colour by using spray gun and compressor after making the surface ready to paintand complete all as specified and directed. 72 Supply and fixing for portable fire extinguisher cylinder filled withmono ammonium phosphate dry powder MAP90 suitable for all types of fire class A,B, C and bulk range discharge two metre minimum and capacity 06 Kg ISI marked complete all as specified and directed 73 Supply and replacement of fire bucket made of 24 gauge steel sheet, capacity 9 ltr complete all as per specified and directed 74 Supply and fixing in replacement fire beater of size 14 x 17 made from MS with 6 solid hardwood handle complete all as specified and directed. 75 Supply and fixing in replacement fire hook with solid hardwood handle complete all as specified and directed. 76 Material and labours for aqueous film forming foam (AFFF) liquid including cleaning of metal container and nozzle etc complete all as specified and directed. 77 Supply and fixing for fire alarm sounder/siren electronic type horizontal single stage continuous normal operation for at least 50 minutes with sound level 65 DB to 120 DB measured at 1.5 m and range upto 2000 m complete all as specified and directed. 78 Material and labours for cleaning strainer of any size fabricated withaluminium strainer to suction line having 1200 holes to the strainer of suction line includesdismantlingthe suction line and lifting it , cleaning the foot valve , scrubbing the complete strainer including 1200 holeswith suitable liquid properly and then lowering back for re fixing the strainer into sea waterwith MS angle arms and02 hooks providedto thestrainer for lifting/ lowering the strainerto the suction line and to the pump setalong with foot valve inside the lowered strainer complete all as specified and directed.
Contract Date: Jan 22, 2026 Contract Value : ₹ 11.62 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Haryana View Result →
23.
Defence #8635089 AOC
Tender For Repair/Maintenance/Servicing Of Lt Supply Distribution System, Mccbs, Panel And Panel Accessories, Trunking Bus Bar System, Lt Underground Cables And Other Connected Works Under Age E/M-Ii In Ge (Central) Khadki.; 1 Supply, Laying, jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable, laid in trenches/ducts or fixed to poles/walls including cable gland of suitable sizesand aluminium lugs for connection complete all as specified and as directed . for cable size 10 Sqmm 4 core 2 Description all as per item No.1 above but cable size 16 Sqmm 4 core 3 Description all as per item No.1 above but cable size 25 Sqmm 4 core 4 Description all as per item No.1 above but cable size 50 Sqmm 3.5 core Note for Item No 1.00 to 1.03 :-(i) During earth work for laying of cable, any damage to the existing services will be made serviceable without any extra cost within 24 hrs.(ii) Contractor should visit the site before quoting the rate for understanding the scope of work. 5 Supply and fix tubing lightgrade galvanised iron of size 50mm bore with all fittings and fixed to poles, walls etc. with flat iron clamps/bolts/nuts/washers or laid in floors/under roadscomplete all as specified and as directed. 6 Description all as per item No.2 above butof pipe size 40 mm bore 7 Material and labour for cutting through existing bituminous road/PCC/floor/Stone block Tank road along cross section of the road as per required breadth and depth for laying of GI tubing/RCC pipe for encasing of cable and repairing the road to match with the original finishes complete all as specified and as directed. NOTE :- Contractor should visit the site before quoting the rate & GI Pipe will be measured and paid seperately in respective item. 8 Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in hard / dense soil complete all as specified and as directed. 9 Material and labour for sand/fine dust cushioning to under ground cable providing with a layer of 08 cm thick before laying of cable and 15 cm after laying of cable in trenches, hand punning complete all as specified and as directed.NOTE :- punning thickness of 18 cm will be measured for payment 10 Supplying and laying precast, PCC LT cable cover, class LV, type flat, size 250mm x 150mm x 40mm complete for protection of underground cable complete all as specified and as directed. 11 Returning, filling in excavated soil in trenches including spreading, leveling, watering and well rammingin layers n. exc. 25 cm thick ccomplete all as specified and as directed. 12 Removing of excavated soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and asdirected. 13 Taking out serviceable/unserviceable electric cable of any size any type from excavated trenches on pole/on wall etc complete all as specified and asdirected. 14 Material and labour in replacement of u/sMCCB 415V, 3 phase 50 HZ FP 63 to 100 Amps breaking capacity 16KA complete all as specified and asdirected. 15 Material and labour in replacement of u/s MCCB 415V, 3 phase 50 HZ FP 125 Amps breaking capacity 16 KA. Switch/rotery type and as per existing complete all as specified and as directed. 16 Material and labour in replacement of u/s MCCB 415V, 3 phase 50 HZ FP 160 Amps breaking capacity 26 KA. Switch/rotery type and as per existing complete all as specified and as directed. 17 Material and labour in replacement of u/sMCCB 415V, 3 phase 50 HZ FP 200 Amps breaking capacity 36 KA complete all as specified and asdirected. 18 Material and labour in replacement of u/s MCCB 415V, 3 phase 50 HZ FP 250 Amps breaking capacity 36 KA complete all as specified and asdirected. 19 Material and labour in replacement of u/sMCCB 415V, 3 phase 50 HZ FP 400 Amps breaking capacity 37 KA complete all as specified and asdirected. 20 Material and labour in replacement of u/sMCCB 415V, 3 phase 50 HZ FP 630 Amps breaking capacity 37 KA complete all as specified and as directed. Note for Item No 10 to 16 :- Rates include for necessaryaltretion for replacement of MCCB in existing panel and necessary connection of incoming & out going cable as per existing maner and inclding lugs, peruls and connected items.Notefor Item No 10 to 16:- (a)The above MCCB to be supplied and fixed with lever type operating knob / tripping on & off switch as per existing all as specified and directed by Engr-in-Charge(b)All the required charges for addition / alteration of the fixing of lever knob / tripping switch as per existing is included in the above quoted rate. 21 Material & labour for disconnect takingdownthe unserviceable ACB and supply and fix new ACB in the existing panel air circuit breaker of rating 1600A440V4 pole50 KA MDO microprocessor release, automatic saftey shutters, mechanical ON & OFF indicators, and as per existing CT ratio and as per existing at site complete all as specified and asdirected.NOTE :-(a) Contractor should visit site beforequoting the rate.(b) Rates include of necessaryalteration for replacement of ACB in existing panel and necessary connection of incoming & out going cable as per existing manner and including lugs, peruls and connected items. 22 Material & labour for disconnect takingdownthe unserviceable ACB andsupply and fixing new ACB in the existing panel air circuit breaker of rating 2000A440V4 pole50 KA MDO microprocessor release, automatic saftey shutters, mechanical ON & OFF indicators, and as per existing CT ratio and as per existing at site complete all as specified and asdirected. NOTE :- (a) Contractor should visit site beforequoting the rate. (b) Rates include of necessaryalteration for replacement of ACB in existing panel and necessary connection of incoming & out going cable as per existing manner and including lugs, peruls and connected items. 23 Material and labour for disconnecting LT XLPE cable of any size from LT Panel or any location as directed for finding fault and Material and labour for defect rectification of underground cable laid in trenches or any location by locating fault with the help of electronic fault locating machine comprising of surge generator pulse, ECHO fault locator with high frequency distance calculator etc. complete all as specified and asdirected.NOTE :- (i)The fault locating equipments will be brought to site within the 12 hours of instruction from Engr-in-Charge.(ii) Complaint will be notified to contractor on mobile phone at any time between 0800 hrs to 2200 hrs and has to be rectified within 12 hours after notification, failing which Rs 500/- per day per complaint will be recovered from the dues to the contractor.(iii) Rates included necessary earth work . 24 Material and labour for straight through(Heat Shrinkable) cable jointing kit for 1.1 KVgrade cablecomplete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25to 50 Sqmm including dismantling the old burnt cable joint termination complete all as specified and asdirected . 25 Material and labour for straight through(Heat Shrinkable) cable jointing kit for 1.1 KVgrade cablecomplete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70to 150 Sqmm including dismantling the old burnt cable joint terminationcomplete all as specified and asdirected . 26 Material and labour for straight through(Heat Shrinkable) cable jointing kit for 1.1 KVgrade cablecomplete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 185to 300 Sqmm including dismantling the old burnt cable joint termination complete all as specified and asdirected. 27 Supply, installation, commissioning and testing ofoutdoor type Outgoing Bus Bar LT panelbox, platform mounted, suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bar, of capacity 250 Amps fabricated in factory having modern fabrication duly powder coated painting, dust and vermin proofand degree of protection not less than IP-55 and CPRI apporoved . The panel shall be made out of 3.00mm thick CRCA mild steel sheet, front door (01 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and suitable angle iron mounting base frame at bottom min 0.6 Mtr above ground level incl PCC work. (a)Incommer:-MCCB4 pole 250A, 36kA, thermal & magnetic release- 01 Nos complete all as specified and asdirected . 28 Supply, installation, commissioning and testing ofoutdoor type Outgoing Bus Bar LT panelbox, platform mounted, suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminium bus bar, of capacity 100 Amps fabricated in factory having modern fabrication duly powder coated painting, dust and vermin proofand degree of protection not less than IP-55CPRI apporoved .. The panel shall be made out of 3.00mm thick CRCA mild steel sheet, front door (01 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and suitable angle iron mounting base frame at bottom min 0.6 Mtr above ground level incl PCC work. (a)Incommer:-MCCB4 pole 100A, 16kA, thermal & magnetic release- 01 Noscomplete all as specified and asdirected . 29 Material and labour for earthing complete with hot dip galvanized steel pipe in pipe electrode, outer pipe 88mm dia medium grade and inner pipe 55 mm diaincluding testing, 3mtr long and having 50x6 mm terminal on inner pipe to connect earthing strip with 14 mm holes for nut bolts, buried directly and vertically in ground with top edge at 30 cm below ground level after making bore hole of 100 mm dia and 3.3 mtr deep using suitable mechanical drilling machine (for drilling near the specified bldg) connected with galvanized steel earthing lead of 32x6 mm strip with minimum two Nos of GI nut bolits and connected to test pointfrom earthing pit. The electrode pipes should be filled with 2x 25 kg bags of carbon based earthing compound. The resistance of the compound should be less than 0.1 Ohms . The compound should be highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities with ph value between7-9. Connected to the earthing test point, Fiber reinforced plastic pit not less than 300x300 mm with pit cover,including necessary returning filling& removal of extra soil , to achieved earth resistance valueless than 5 Ohmsincluding testing complete all as specified and asdirected . NOTE :- IF the desired result not obtained after testing the contractor should do re-eathing without any extra cost. 30 Material and labourfor connecting galvanised iron (GI) strip 32 X 6 mm, in replacement to the existing earthing strip to eqpts complete all as specified and asdirected. 31 Lopping / prooning of tree branches upto the extend to obtain clearance all around the LT over head lines / HT over head linesconductor upto 1 mtr from furthest conductor on pole including removing of cut branches and cleaning of site complete all as specified and asdirected .NOTE :-(a). The trees branches etc will be removed from site and stack as directedand will not be carried away by the contractor as the wood belongs to CEO / DEO. (b).Contractor will employ sufficient labour to complete the job with in time as directed.(c).Contractor will be responsible for any type of mis-happening / accident while prooning the trees.(d). Contractor supervisor will take proper shut down from MES installation before starting the work and clear it before resuming power supply . (e). The contractor will provide proper tools and safety devices to his staff for prooning of trees. 32 Material and labour in replacement cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts & washers, welding, bending cold or hot, drilling holes for bolts, in any shape or sizes as indicated or directed and inclusive of one primer coat and two coats of alluminium paint complete all as specified and as directed 33 Supply and fix in replacement of MCCB thermal magnetic release four pole 25 KA 63 Amps Make Legrand Cat No 420053 /L&T /ABB with one way metal enclosure Cat No 5078 01/L&T /ABBand making conections of cables with suitable size nut bolt etc including making good the disturbed suface of wall including material complete all as specified and as directed. 34 Supply and fix in replacement of MCCB thermal magnetic release four pole 25 KA 100 Amps Make Legrand Cat No 420055/L&T /ABBwith one way metal enclosure Cat No 5078 01 /L&T /ABBand making conections of cables with suitable size nutbolt etc including making good the disturbed suface of wall including material complete all as specified and as directed. 35 Supply and fix in replacement of MCCB thermal magnetic release four pole 25 KA 160 Amps Make Legrand Cat No 420057/L&T /ABBwith one way metal enclosure Legrand Cat No 5078 01/L&T /ABBand making conections of cables with suitable size nuts, bolt etc including making good the disturbed suface of wall complete all as specified and as directed. 36 Supply and fix in replacement of MCCB thermal magnetic release four pole 25 KA 200 Amps Make Legrand Cat No 420218/L&T /ABBwith one way metal enclosure Legrand Cat No 5078 01/L&T /ABBand making conections of cables with suitable size nuts, bolt etc including making good the disturbed suface of wall complete all as specified and as directed. 37 Supply and fix in replacement of MCCB thermal magnetic release four pole 35 KA 250 Amps Make Legrand Cat No 420249/L&T /ABBwith one way metal enclosure Legrand Cat No 5078 01/L&T /ABBand making conections of cables with suitable size nuts, bolt etc including making good the disturbed suface of wall complete all as specified and as directed. 38 Supply and fix in replacement of MCCB thermal magnetic release four pole 35 KA 400 Amps Make Legrand Cat No 422007/L&T /ABBwith one way metal enclosure Legrand Cat No 5078 01/L&T /ABBand making conections of cables with suitable size nuts, bolt etc including making good the disturbed suface of wall complete all as specified and as directed. 39 Material and labour for repair/overhauling of LT panels of any make & capacity MCCB 100A to 630A, voltage 415 Volts/230 Volts, opening the doors/covers of the cubicle enclosure for carrying out the servicing/ maintenance / repairs of the Panel Board, switch gear, metering etc and re-fixing the same in place after following repairs/check for smooth functioning all as specified and as directed :-a) Cleaning the inside switch gear chambers for removing dust, carbon and rusted surfaces including cleaning with blower and apply insulating varnish.b) Check the condition of the support insulators including cleaning applying dettol solution and replacement of support insulatorsif required. c) Tightening up of all bus bar connections, cable connections, replace bolt, nuts wherever required. 40 Material and labour for disconnecting and taking down existing bus bars system from LT panel board of all size cleaning with CT, removing old insulation and providing new heat shrink insulating sleeves asper the site requirements, connecting and fixing in the same panel with new nuts, bolts, washers of suitable size complete all as specified and as directed. a)Cleaning the inside switch gear chambers for removing dust and carbon including cleaning with the help of blower and apply insulating varnish.b)Check the condition of the support insulators including cleaning applying Dr beck red for better IR values and replacement of support insulators if required and as directed by Engr-in-Charge. c)Tightening up of all bus bar connections, cable connections, replace nut/bolts & washers wherever required. 41 Material and labour disconnecting and taking out old existing burnt/worn out control wiring connections incl cable lugs of LT panel board of all size and supply and connect with new cable PVC insulated, stranded copper conductor size as per existing incl new copper lugs and nuts, bolts, washers as per the site requirements complete all as specified and as directed. 42 Material and labour for disconnecting and taking out old existing burnt/worn out cablelugs, nuts, bolts, washers etcas per the site requirements fromLT panel board of all size (incomming and outgoing) and supply and connect with new aluminium lugs and nuts, bolts, washers etc complete all as specified and as directed. 43 Taking out old existing worn out neoprene gasket from shutters ofLT panel board of all sizessingle door / double doors or openable on both sides and supply and fix newneoprene gasket complete all as specified and directed.NOTE :- The rate of neoprene gasket is included in the unit cost. 44 Note for Item No 35.00 to 39.00 :- (i)Contractor should visit the site before quoting the rate. (ii)Rates including for any modifications/frame work and renewal/welding work during maint. (iii)Minor spares like cleaning/lubricating and cleaning materials, nut bolts, washers, lugs/glands etc included in the unit rate and major spares will be measured and paid under relevant items of schedule(iv)Contractor should take proper shutdown from MES rep and should take all safety precautions of equipments and manpower.Any damageof dept assets will be the responsibilites of contractor. (v ) All T&P, safety equipments required for completion the job included in the unit rate.
Contract Date: Jan 20, 2026 Contract Value : ₹ 26.93 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 14
Maharashtra View Result →
24.
Defence #8620286 AOC
Tender For Special Repair To Building Nos P-95, P-96, P-97, P-100, P-882 & P-885 In The Aor Of Age B/R-Ii Under Ge 864 Ews(Job No: W/Sr (Bldgs)-23/Bb Cantt/2025-26).; 1 Taking down frame with shutters (without taking off shutters from frame)n.exc 1.5 sq.m each all as specified and directed. 2 Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each all as specified and directed. 3 S&F for 2nd class hard woodPlain, solid, straight chowkhats and frames, wrought,framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed. 4 M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 Part I, kiln reasoned and chemically pressure treated all as specified and directed 5 S&F brass door magic eye as given specification material resin lens zinc alloy, top diameter: 31.2mm, bottom diameter approx. 24mm, pipe diameter approx. 16mm total length approx. 50mm, inner height approx. 36mm application 35 to 60mm thick viewing angle 200 degree of surrounding without opening the door unique design ultra clear view and superior finish, wide angle best in class lens for all round visibility the outsider cannot hide any ware, the back cover protects you from the outsider observing any movements inside easy to install with inbuilt screw over a wide range of door thickness from 35 mm to 60mm etc requiredat site complete all as specified and directed by Engr-in-charge 6 Cutting into existing manholes of internal dia of pipe 150mm for connecting new drains, making good to pipeand rendering, cutting out existing benching for and and forming branchchannel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B1 smooth finished , and reforming benching as required complete all as specified and directed 7 S&F 150mm bore of pipe reinforced concrete pieces class NP-2 laid jointed complete with collars including PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) concrete bed to drain pipes 150mm including packing under, and haunching against the sides of pipes after they are laid and tested & Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed 8 Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron)work for, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ 3 truck and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, complete all as specified and directed 9 S&F of Powder coating of any colour (Thickness of powder coating not less than 50 micron )anodised aluminium door shutters, aluminium sectionweighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as door stopper (1 No.). hinges type B-21 125mm long (3 Nos.) suitable handle (2 Nos.) for each shutter complete all as specified and as directed. 10 S&F Powder coating of any colour (Thickness of powder coating not less than 50 micron ) Anodised aluminium window and ventilator shutters fixed/sliding/side Hung typewithout sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazingclips, rubber packing, anodised aluminium snap beading, screws, handle , locking arrangement, Necessary Butt Hinges, Tower Boltsetc complete all as specified and as directed by Engineer-in-charge. 11 S&F 4 mm thick frosted sheet glass selected quality and glazing with aluminium & rubber beading in squares/rectangular window panes etc complete all as specified and directed 12 S&F 4.8 mm thick frosted sheet glass selected quality and glazing with aluminium & rubber beading in squares/rectangular window panes etc complete all as specified and directed 13 S&F for ACP sheet 4mm thick in aluminium frame including necessary fittings, complete all as per specified and directed by Engineer-in-Charge. 14 S&F stainless steel butt hinges medium weight 100 mm size etc complete all as specified and directed. 15 S&F 150 mm size extruded aluminium handles fabricated type, anodisedall as specified and directed. 16 S&F 150 mm size aluminium anodised barrel tower bolts of extruded sections all as specified and directed. 17 S & F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloyall as specified and directed. 18 Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed. 19 M&L for brickwork with old sized subclass B bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc complete all as specified and directed. 20 M&L for brickwork with old sized subclass B bricks straight or curved on plan to any radius and built in CM 1:4 etc complete all as specified and directed. 21 Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed. 22 M&L for rendering 15mm thick cement plaster in CM 1:6 on brick work or concrete surfaces finished even and fair without using extra cement & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including preparation complete all as specified and directed. 23 M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over oldsurfaces including preparation complete all as specified and directed. 24 M&L for applying 1 to 2 mm thick white wall care putty to obtain smooth/ even finish surface using sand paper complete all as specified & directed 25 M&L for rendering 10mm thick cement plaster in CM 1:4 on brick work or concrete surfaces finished even and fair without using extra cement and preparation of new plastered surfaces of walls, apply two coats of oil bound distemper complete all specified and directed. 26 M&L for preparation of old plastered surfaces of walls, apply two coats of oil bound distemper complete all specified and directed. 27 S&F for Framed brackets of angles or tees with web and flanges, tubular pipes cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 & Dismantling wrought iron or mild steel work of any description. 28 M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in post/strut foundation complete all as specified and directed. 29 S&F in repair 2mm thickfibre glass reinforced translucent corrugated sheeting with two corrugated side lap fixed withL type or J typeor cranked hook and washer in wall complete all as specified and directed. 30 M&L Vitrified Ceramic tiles light/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tile laid over and including screed bed or bedding layer 20mm thick in CM(1:6), including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed. Make: So many, Kajaria, Orient bell 31 M&L coloured non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding 15mm thick screed bed in CM 1:6,including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etccomplete all specified and directed. 32 M&L coloured glazed ceramic tiles in vertical surface 450x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM 1:4,etc including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed. 33 M&L for machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry @3kg/Sqm mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete including 20 mm thick screed bed in cement mortar 1:4 & Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded in any mortar complete all as specified and directed by Engr-in-Charge. 34 Grinding with machine grinder of granite stone /kota topping with marble aggregate /marble Stone slab / Kota slab etc. as in old floor, wall, cooking platform, shelf etc & polishing complete all as specified and directed. 35 S&Fsteel window/ventilatorfactory made out of box type and shutter (double shutter) with sash bar made out of section using flash butt welding, complete including hinges, tower bolt, handle , grill10 mm sq bar includingtwo coat of synthetic enamel paint overonecoat of red oxide primer,tarred hold fasts,PCC blocks, includingplain/figured glass 3.0mm thick andwire mesh 0.36 mm nominal dia of wire and average width of aperture 1.18 mm all as shown on latest drg by competent auth/ CE 31 Zone/ as per drg in CA including taking down existing spoiled and unserviceablewindows/ ventilators of any type (wooden/steel) complete all as specified and directed. 36 S&F sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mmand bowl size 410mmx330mmx 160mm including 40mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms) complete all as specified and directed. 37 S&F in repairs 32/40 mm dia bore PVC flexible pipe for sink complete all as specified. 38 M&Lfor 18 to 20 mm thick PVC prelaminated solid board with one side decorative choice laminate and other side balancing white including 3mm thick lipping and equal to thickness of board as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed. 39 S&Ffor Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. 40 S&F 100 mm size extruded aluminium handles fabricated type, anodisedall as specified and directed. 41 S&F hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, Size of hasp and staple in mm 100complete all as specified and directed. 42 S&F continuous (piano) hinges 30mm Width of flaps (when open) ,mild steel, bright finish or electro galvanised complete all as specified and directed 43 S&F pre-painted galvalumealuminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl Dismantling of plain or corrugated steel sheeting, anygauge thickness , including nanital or similar pattern roof covering all as secured and directed 44 S&F pre-painted galvalumealuminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl Dismantling of plain or corrugated steel sheeting, anygauge thickness , including nanital or similar pattern roof covering all as secured and directed 45 S&F Mild steel sheeteaves gutter of 1.25mm thick and min dia 150mm, galvanised class 3, half rounded with rounded edges complete as specified and directed 46 S&F MS angles(internal/ external) or nozzle piece outlets thickness 1.25mm and dia 150mm complete all as specified & directed 47 S&F MS drop ends / for spigot or socket ends or nozzles thickness 1.25mm and dia 150mm complete all as specified & directed 48 M&L 6mm thick Non Asbestos fibre cement /Pre Laminated self embossed texture designer board E-Board classic size 600x600mm, HPSC (High pressure steam cured)to be fixed or inserted to pre laminated GI frame work for seamless ceiling size 600mm x 600mm with main runner 38x24x0.9mm thick, cross tee 8.6x24x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip incl Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover filletscomplete all as specified and directed. 49 M&L for 15mm thick second class hardwood boarding as in ceiling planed one sided with butt joints and fixed with nails incl beading fillets cornices etc incl dismantling of old boarding complete all as specified 50 S&F for wooden laminated flooring in strips of size 120 cm long and 20 cm wide and 6-8 mm thick, fixed with PVC sheet and cushion including fillets/cornices, laid over 12mm thick BWR plywood incl Dismantling boarding, any description, fixed in any position with nails as in flooring, cupboard, drawers, showcase, cupboard shutters, wooden shelves, Partition, wooden flooring etc complete all as specified and directed. 51 M&L 2nd class hardwood 40mm thick boarding, as in flooring, plane one side with butt joints and fixed with nails incl Dismantling boarding, any description, fixed in any position with nails as in flooring, cupboard, drawers, showcase, cupboard shutters, wooden shelves, Partition, wooden flooring etc complete all as specified and directed. 52 M&L2mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and sealed down with an approved adhesive all as specified and directed. 53 Taking down iron gates of any description 54 M&L forFramed work such as grills, gratings, gates etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 55 S&F 110 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls & Taking downpipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified and directed. 56 S&F 75 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to wallsTaking downpipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified and directed. 57 S&F PVC(SWR) branch piece single equal or unequal 110mm 58 S&F PVC(SWR) branch piece single equal or unequal 75mm 59 S&F PVC(SWR) bends any radius 110mm. 60 S&F PVC(SWR) bends any radius 75mm. 61 S&F PVC(SWR) Strap any radius 110mm. 62 S&F PVC(SWR) vent cowl any radius 110mm. 63 M&L for cutting chases for concealed water tubing and making good to facing in cement mortar 1:3, cutting not exceeding 10cm girth all as specified and directed. 64 S&F 3 layer PPR Polypropylene random co polymer concealed pipes of 16mmouter dia SDR7.4 (PN16) UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors Taking up or down steel tubing and connections for 15mm diacomplete all as specified and directed 65 S&F 3 layer PPR Polypropylene random co polymer concealed pipes of 20 mmouter dia SDR7.4 (PN16) UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors Taking up or down steel tubing and connections for 20mm dia complete all as specified and directed 66 M&L for 75mm thickPCC 1:3:6 type C-2 as in flooring complete all as specified and directed 67 S&F in repairs 15mm bore Brass CP wall mixer 3 in 1for mixing hot & cold water screwed down for iron pipe and fixed with all connected fittings & fixtures complete all as specified and directed. 68 S&F in repairs 15mm bore Brass CP wash basin mixerswan type for mixing hot & cold water screwed down for iron pipe and fixed with all connected fittings & fixtures complete all as specified and directed. 69 S&F in repair PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 of 110 mm dia etc complete all as specified and directed. 70 S&F in repair Vitreous Chinawash down water closet one piece pan (Pedestal pattern), white/colour (including all fitting all fixing bolts, flushing cistern, jet spray and flush pipe) completeall as specified and directed . Make : Cat part No - Lys-Wht-88515300UFSMUN or techno commercially equivalent make/model as approved by GE. 71 S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed. 72 S&F in repairs 125mm brass chromium plated shower rosesincluding fixing to steel pipe etc complete all as specified and directed. 73 S&F in repairs vitreous china pedestal wash basin of size 550x400mm (flat backor angle back type) including brackets cutting for and pinning in ends of brackets or erecting standinclusive 32mm waste fittings, brass, chromium plated for basins, waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and waster pipe etc complete all as specified and directed. 74 S&F in repairs Toilet paper holder, vitreous China, box type, white,fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. 75 S&F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed. 76 S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 77 S&F in health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completeall as specified and directed 78 S&F in corner glass shelf ,three set type, of size 300x300mm (lower), 225x225mm (medium) & 150x150mm (upper) fixed with Cp brass screws, complete all as specified and directed. Make :- Jaquar Cat Part No CAN-CHR-1173N or techno commercially equivalent make/model as approved by GE. 79 S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 80 S&F in repairs brass chromium plated Tubular towel rail 20mm dia complete all as specified and directed. 81 S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) all as specified and directed. 82 S&F in repairs 15mm bore Bib taps, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed. 83 S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. 84 S&F in repairs 15mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed. 85 S&F in repairs 15mm bore stop valves or angle valve, 2 in 1 type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed. 86 S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part Iincluding dismantling PVC water tanks exc 250 litres and not exc 500 litres capacity etc complete all as specified and directed. 87 Demolition of cement concrete (unreinforced)in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed. 88 M&L for 75mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base over rammed earth complete all as specified and directed. 89 M&L for rubber moulded Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Gradewith grey cement and no pigment laid over 50mm thick sand cushioning complete all as specified and directed. 90 M&L rubber moulded chequered cement concrete tiles 30cmx30cmx25mm thick with grey cementandpigments over 20mm thick screed bed or bedding layer in cement mortar 1:6 ,set, jointed and pointed in neat cement slurry complete all as specified and directed 91 M&L for cement concrete 1:2:4,type B-1(using 20mm graded stone aggregate) as in lintels upto1.5m clear span,cills,steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, ramps not provided for in Item 04028, water troughs and the like including weathering,slightly rounded or chamfered angles and throating, complete all as specified and directed. 92 M&L for endure anti-skid coloured tiles 300mmx300mmx9-10mm thick, laid in floors etc, set & jointed in neat cementmixed with pigment to match the colour of tiles over and including 20mm thick screed bed in cement mortar (1:6) including demolition/dismantling of old tiles all l as specified and directed. 93 M&L for cement concrete 1:3:6, type C-1(using 20mm graded stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints every 2.5m and corner filled with bitumen 85/25 complete all as specified. 94 M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete including dismantling of old railingall as specified and directed. 95 M&L for RCC (nominal mix)1:2:4, type B1 (using 20mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including use and waste formwork & demolition of Concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified & directed. 96 M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. 97 M&L for 20mm thick Granite (of any type) in steps, jambs, pillars, window- cills, cooking platforms and like including rounding edges, laid over 15mm thick in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified & directed. 98 M&L wrought Second class hard-wood in scantlings frame work incl Dismantling of timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified. 99 M&L for Preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 100 M&L for Preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 101 M&L for Preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. 102 M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 103 S&F in repair 25mm dia stainless steel drapery curtain rods, heavy duty, fancy type with fancy brackets & domes (two in each door and window) complete all as specified and directed. 104 S&F 12mm thick toughened & figured glass as in hinged door, partitions, with AMC logo & 92 BH Logo stickers & incl necessary long solid fancy type handle, suitable hinges, locking system, hydraulic floor spring and all other necessary accessories as required making good the surface matching with the existing surface complete all as specified & directed. 105 M&L for taking down carefully existing old burnt out / unserviceable aluminium / copperpoint wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing the all type of fittings & fixture alongwith it connected fixing accessories such as all switches, sockets, ceiling roses, holder,regulators,bell etc complete and removing ofall the old materials from the site for to taking as a schedule of credit complete all as specified and directed by EIC . 106 Dismantling unserviceable Main switch/DBs with MCBs complete all as specified and directed. 107 Taking down carefully electric water heater of any capacity from site and repair itif requiredand refixing the same position including spray painting with entire satisfaction of Engr-in charge. 108 Taking dwon carefully Exhaust fanof any capacity from site and repair itif requiredand refixing the same positionwith entire satisfaction of Engr-in charge. 109 Taking dn carefully Ceiling fanof any capacity from site and repair itif requiredand refixing the same position includingcleaning & spray painting with entire satisfaction of Engr-in charge. 110 Taking dwon carefully electric energy meter from existing DBand refixing the same position with proper electric connection with distribution boardwith entire satisfaction of Engr-in charge. 111 M&L for single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of suitable sizes of modular boxesmounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etcone light point / fanpoint wiring system controlled by oneway switch completeall as specified & directed by EIC 112 All as per sr item No 111here-in-before but one 5 Amp socket outlet point wiring system fixed on same board & controlled by one way switch 113 All as per sr item No 111here-in-before butone 5 Amp socket outlet point wiring system fixed on independent board & controlled by one way switch 114 All as per sr item No 111here-in-before but two 2 way pointand controlled by one two way switch point wiring system. 115 All as per sr item No 111here-in-before butone bell point wiring system fixed on board and controlled by one way bell switch complete 116 Description of all as per above sr item No 7 butusing PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring systemand also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductorwire used as a continuous earth wire for power point wiring system complete . 117 S&F of modular type switch 5/6 Amps 220 Volts AC,one module 118 S&F of modular type socket of 5/6 Amps 220 Volts AC,3/5 multi pin type with two modular complete all as specified and directed. 119 S&F of modular type switch of 15/16 Amps 220 Volts AC one module 120 S&F of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular complete all as specified and directed. 121 S&F of modular type bell push flush type single pole one way complete all as specified and directed. 122 S&F inrenewalbell Ding Dong Type, 220 volt AC, Single Pole complete as per specified and directed 123 S&F in renewalone/two modular type step type electronic fan regulator with having hum free step alongwith speed control know complete all as specified and directed. 124 S&F ceiling rose three terminals type made out ofpolycarbonate , isolated body completeall as specified and directed. 125 S&F in renewalangular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adaptor and back plate for housing of bulb Including providing of LED bulb of capacity 7/9 watt warm/ white colour type complete all as specified and directed . 126 S&F in renewal LED tube lightfitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colourcomplete including providing of suitable type flate flexible cable for electric connection from ceiling rose to fitting complete and including taking down of old fitting all as specified & directed 127 S&F in renewal LED mirror light fitting with high out put diffuser 2 feet long of 10 Watt220 volt AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting setincluding providing of suitable type flate flexible cable for electric connection from ceiling rose to fitting and making electric connection and including taking down of old fitting all as specified and directed. 128 S&F star rated electric wall mounted fan 400 mm sweep of single phase 230 volt AC with having pull cord oscillating type single piece AS blade, three speed pull cord control complete with blade and guard framing support & connecting accessories and fixed/grouting on wall/roof with MS fastener, nut & bolt including providing flate flexible copper wire and making all electricalconnection complete all as specified and directed. 129 S&Frecessed/ceiling concealed mounted down lighter lightfitting of round/Square flate shapes decorative type with high efficiency PMMA diffuser soft glare free light with drivers & LED luminaire of rating capacity in 15 Watt to 18 Watt 220 volt AC complete light fitting set all as per existing fitting type/ size of sample /model and make and including making in cutting or additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed. 130 S&F recessed / ceiling concealed mounted flat slim panel square shape with LED luminaire panel type fitting of size 600 mm x 600 mm of rating capacity in 35W/36/37 Watt 220 volt AC recessed type with high efficiency PMMA diffuser soft glare free light with driver, holder & LED lamps complete used for roof ceiling and required fitting use in both warm/white type colour complete setproviding of suitable type of flat flexible two/three core cable and making electric connection complete set including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete all as specified and directed. 131 S&F in renewal of LED street light fitting for buildings of rated capacity 35 Watt 230 volt AC with having LED driver, lamp bracket with impact and corrosion resistant with lenses embedded including thermal management in multiple optics complete with IP 65/66 protection suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete including providing of suitable size of dia GI pipe light grade bracket and it to match/setting the new fitting fixture hole attachment system of suitable bracket length upto 1.2 mtr long and make to shape / bendof 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos ofMS fixing clamp alongwith nut bolt and including providing of suitable type of flate flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed. 132 S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of size/typefor vertical type distribution boardvertical landline type of rating VTPN 4 way type 415 volt3 phase AC supply holding system with IP protection rating IP 65/ 66with ISI marked and having fitted neutral and earth link bus bar and mounting base channels and blanking plates suitable for holding of main MCCB as incomer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TPN 160 Amps with breaking rupting capacity 25 KA and having adjustable setting type and also providing of 12 Nos of MCB SP 63 Amps 10KA C curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed by EIC. 133 S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable ofsize/type of distribution board of rating SPN 8 way type 220 volt AC supply systemwith IP protection rating IP 65/66 with ISI marked and having neutral and earth link bus bar and mounting base channel suitable for holding MCBs incomer and s outgoingsystem complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed by EIC. 134 S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable ofsize/type of distribution board of rating SPN 4 way type 220 volt AC supply systemwith IP protection rating IP 65/66 with ISI marked and having neutral and earth link bus bar and mounting base channel suitable for holding MCBs incomer and s outgoingsystem complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed by EIC. 135 S&F of MCB SPN 40 to 63 Amps with breaking capacity 10KA C Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete including taking down of old MCB complete all as specified. 136 S&F of MCB SP 40 to 63 Amps with breaking capacity 10KA C Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete including taking down of old MCB complete all as specified.. 137 S&F of MCB SP 06 to 32 Amps with breaking capacity 10KA C Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete including taking down of old MCB complete all as specified. 138 S&F star rated electric ceiling fan 1200 mm sweep min air delivery 210 CFM with service value 6.0 BEE norms 5 star rating with brushless direct current motor (BLDC)of single phase 230 volt AC alongwith blade, down rod, canopy, clamps with reel insulator, electronic regulator & accessories and MS fan hook fixed in ceiling/roof including providing flate flexible copper wire and making all electricalconnection complete all as specified and directed. 139 S&F commission and testing of star rated of electric ventilation exhaust fan of size 250 mm sweep complete AC single phase 230 volt and made out of sturdy engineering plastic body complete with blade and louvers with shutter and also providing or making of suitable type/size of hole on wall out of any type of wall construction work for installation /fixing of exhaust fan after fan fixing work making good to all disturbed hole surface area of wall/ceiling and floor area of hole system and to match/dressing to it as per the existing surface on wall/floor/ceiling etc by cement plastering work complete all as specified and directed by EIC. 140 S&F of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size2 Run of 6 Sqmm and 1 Run of 6 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy dutyISI markPVC Casing capping / PVC conduit of suitable size along with its all fittingsand connected accessories and duly fixed concealed on wall or surface on wall includingtaking down old unserviceable sub main wiring system complete and making good all disturbed surfaces match to the existing surface complete all as specified and directed . Note:- 3 runs of 6 sqmm wire and one run of PVC casing capping/conduit shall be measured as 1.0 RM. 141 S&F of sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting channel alongwith one 01 MCB SP 20 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection including taking down of existing DBs a as required at site or directed complete all as specified and directed 142 Supply, laying and testing ofLT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty)with aluminium conductor 1100 volt gradecross sectional area of size 35 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as specified and directed. 143 Allas per ser item No 142here-in-before but sizes 16 sqmm 4 core 144 Allas per ser item No 142here-in-before but sizes 10 sqmm 2 core 145 Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and gettingout complete all as specifiedand directed by Engineer-in-Charge. 146 Returning, filling in, including spreading, levelling watering and well ramming inlayers not exceeding 25 cms thick each layer compete all as specified and directed by Engineer-in-Charge. 147 Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point completeall as specified and directed by Engr-in-charge. 148 M&L for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified. 149 Supply & laying old size sub class B bricks laid flat in trenches over the cable with the length of brickperpendicular to the directionof cable length, adjacent/abutting each othercomplete all as specified and directed by Engineer-in-charge. 150 S&F galvanised steel tubing, light grade, ISI marked, for protection of under ground cable on pole/wall/under road including taking out old unserviceable pipe 40 mm bore complete all as specified and directed. 151 S&F in repair and installation electric chimneymaximum suction 1200 Cubic meter/ h , rated power 223 W Net weight 12.3 kg Rated Voltage 230 V, Single phase AC ,50 HZDimension 59.8 cmX 48 Cm x 49.4 cm including complete fixing accessoriescomplete all as specified & directed. 152 S&F in repairtesting commissionLT feeder pillar box double door factory fabricated outdoor type front openable with locking arrangement compartmental type made out of 3.15 mm thick CRCA sheet apoxy painted and two coats of synthetic enamelled paint over a coat of red oxide of size 750mmx600mmx550mmcomplete mounted on and including MS angle iron frame made out of 40x6mm thick of suitable size painted with black synthetic enamel paint over a coat of red oxide primer embedded in PCC (1:2:4) type B-1 in foundation upto the depth of 300mm and 150mm above ground level incl. necessary excavation and earth work suitable for housing andincludingthe following accessories :-(a) MCCB250 Amp 4 pole 50 KA with overload & thermal release setting - 01 No (Incoming)(b) MCCB 160 Amp 4 pole 25 KA with overload & thermal release setting-04 No (outgoing) (c) Copperbus bar 350 Amp of suitable size -01 Set.(d) LED type indicator lamp - 01 Set (03 Nos) (e) MCB SPN 40 Amp-02 Nos 153 S&F in renewal LED BOLLARD light fitting decorative type with drivers & LED luminaire of rating capacity in 10W 220 volt AC with new generation energy saving environmental friendly long life & having unique concept LED Bollard in IP 66 to ensure sustainable performance in all section and aesthetics which keeps the surrounding lively complete set including making and duly fixed on PCC block with holding attachment work (when if required at site) for settingand also providing of suitable type of flat flexible two/three core cable and making electric connection complete all as specified & directed. 154 M&L for earthing work complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soilall as shown in Electrical Plate No 3 of SSR part -I. and also making arrangement of20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh, and also including provision of concrete pit cover framing work in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover complete work all as specified and directed. 155 Allas per ser item No 154here-in-beforebut using galvanised Iron strip 25 x4 mm as earthing lead
Contract Date: Jan 19, 2026 Contract Value : ₹ 1.03 Crore
Statutory Bodies & Commissions/Committees No of Bidders 4
Jammu And Kashmir View Result →
25.
Defence #8596997 AOC
Tender For Maintenance And Repair Of E/M Services For Mh Area Under Ge Gwalior; 1 Taking down following defective items fromThree Phase 5kVA Online UPS invertorand S&F following Items with testing and commissioning as directed by Engn-in-charge. 2 IGBT Modules-Cards 3 PCB cards like IC’s, Transistors, relays, SCR’s resistances etc 4 Sensing Transformers for circuits 5 Main Transformer 6 Rewiring of UPS systems including cable/solder etc. 7 Digital Display Cards Meter 8 Battery Re Charging Onsite of Existing batteries with a heavy duty CCCV Type Charger- SMF 12Volts. 9 Control switch 10 Cooling Fans/Circuit 11 Capacitor Bank 12 Input /Output Terminations 13 2 Pole 4 Way 30 Amps By Pass Switch 14 Main Control Card 15 Protection Card 16 Power Supply /SMPS Card 17 Charger Cards 18 SCR-SCR Modules 19 M&L for repair & maintainance and servicing of Air Compressor, 440V,3 Phase ,50 hz,capacity of upto 12.5 HPand renewal of all unsv part if any in air compressor system and renewaloil and gasket for smooth functioning installed at MH that all unsv part quated including in this job complete all as specified and directed. 20 M&L for repair & maintainance and servicing of Vaccum Compressor ,440V,3 Phase ,50 hz,capacity of upto 12.5 HPand renuwal of all unsv part if any in Vaccum compressor system and renewaloil and gasket for smooth functioning installed at MH that all unsv part quated including in this job complete all as specified and directed. 21 M&L in renewal suction valve of Vaccum/Air Compressor, 440V,3 Phase ,50 hz, capacity of upto 12.5 HPsmooth functioning installed at MH that all unsv part quated including in this job complete all as specified and directed. 22 M&L repair & maintainance and servicing of Air Drier System capacity of 100 CFMand replace all unsv part if any in Air Drier System for smooth functioning installed at MH that all unsv part quated including in this job complete all as specified and directed. 23 M&L in renewal of Solenoid valvein Air Drier System capacity of 100 CFM for smooth functioning installed at MH thatcomplete all as specified and directed. 24 M&L repair & maintainance and servicing of Diesel Engine Fire pump System ,440V,3 Phase ,50 hz,capacity of upto 12.5 HPand renewal all unsv part if anyfor smooth functioning installed at MH that all unsv part quated including in this job complete all as specified and directed. 25 M&L repair & maintainance and servicing of Electrical driven fire pump System,440V,3 Phase ,50 hz,capacity of upto 12.5 HPand renewal all unsv part if anyfor smooth functioning installed at MH that all unsv part quated including in this job complete all as specified and directed. 26 M&L repair & maintainance and servicing of fire jockey pump System 440V,3 Phase ,50 hz,capacity of upto 12.5 HPand renewal all unsv part if anyfor smooth functioning installed at MH that all unsv part quated including in this job complete all as specified and directed. 27 M&L repair & maintainance and servicing of Fire control pannel System,440V,3 Phase ,50 hz, ,230 Volt,50 Hz,and renewal all unsv part if anyfor smooth functioning installed at MH that all unsv part quated including in this job complete all as specified and directed. 28 M&L in renewal Non return valve 100/150 mmsize inclding assessories item like screw, nut gasket etc.complete all as specified and directed. 29 M&L for Taking out old defective burnout motor of capacity 5 HP, 3 phase, 440 V, 50 Hz from foundation and transfer it to workshop for rewinding with super enamelled copper wire of existing size & gauge and renewal of DE & NDE bearing so as to match the manufacturers original specification and refitting the same, testing and commissioning complete all as specified and directed. 30 M&L for Taking out old defective burnout motor of capacity 7.5 HP, 3 phase, 440 V, 50 Hz from foundation and transfer it to workshop for rewinding with super enamelled copper wire of existing size & gauge and replacement of DE & NDE bearing so as to match the manufacturers original specification and refitting the same, testing and commissioning complete all as specified and directed. 31 M&L for Taking out old defective burnout motor of capacity 12.5 HP, 3 phase, 440 V, 50 Hz from foundation and transfer it to workshop for rewinding with super enamelled copper wire of existing size & gauge and replacement of DE & NDE bearing so as to match the manufacturers original specification and refitting the same, testing and commissioning complete all as specified and directed. 32 S&Fin renewalfully automatic star delta starter suitable for upto 15 HP AHU Motor/Centrifugal Pump Set Motor 415 volts 50 Hz Panel Mounting complete with contactor and suitable thermal relay complete all as specified and directed 33 M&L in renewal Automatic Bar Pressure Switch for air /vacuume pressure system complete all as specified and directed. 34 M&L in renewal power contactor for star delta starter upto 15 hp motor complete all as specified and directed. 35 M&L in renewal Thermal Relay for star delta starter upto 15 hp motor complete all as specified and directed. 36 M&L in renewal Butterfly valve upto size of 150mm dia pipe including assessories item like screw,nut,gasket etc provide by contractor complete all as specified and directed. 37 M&L in renewal Hose reel drum 30 mtr length upto dia 100 mm with male female coupler as same size complete all as specified and directed. 38 M&L in renewal Hose box made of 18 gauge MS Sheet 800mm x 600mmx 250mm with double door with 4mm thick glasses and door frame made of 16 gauge MS Sheet painted fire red out side and brilliant white inside yard compled all as specified and directed. 39 M&L in renewal for Hydrant valve size upto 150 mm the hole not less than 50 mm and the thickness shall not be less than 6 mm complete all as specified and directed. 40 M&L in renewal two way inlet breeching valve SS Hydrant valve size upto 150 mm the hole not less than 50 mm and the thickness shall not be less than 6 mm complete all as specified and directed. 41 M&L in renewal Automatic Bar Pressure Switch for Fire hydrant system completed all as specified and directed. 42 M&L for shifting the door sensor set of lift 13/15 passanger to outside the door car as per direction of Engr-in-charge complete all as specified and directed. 43 M&L in renewal ElectronicDoor sensor for Lift 13/15 Passanger and sensor have same make as per lift make and fixing will complete by Authorised person from Lift Company installed at MH complete all as specified and directed. 44 M&L in renewal Over Voltage Protector for Lift 13/15 Passanger and fixing will complete by Authorised person from Lift Company installed at MH complete all as specified and directed. 45 M&L in renewal 12 Volt ,7AH battry for ARD for Lift 13/15 Passanger and fixing will complete by Authorised person from Lift Company installed at MH complete all as specified and directed. 46 M&L in renewal Fan Motor for Lift 13/15 Passanger for fresh air and fixing will complete by Authorised person from Lift Company installed at MH complete all as specified and directed. 47 M&L in renewal Concealed Celling light for Lift 13/15 Passanger and fixing will complete by Authorised person from Lift Company installed at MH complete all as specified and directed. 48 M&L in renewalDuct of cooler with size as per site requires like AHU DUCT/DUCTABLE AC/DUCT COOLER for uniformly distribute the cool air includingall accessoriescomplete all as specified and directed. 49 M&L in renewal black insulation with aluminium foil for Duct cooler/Duct of AHU for protection outside sunlightcomplete all as specified and directed. 50 M&L in renewal FireDetectors Complying with and type certified to EN - 45 Addressable type multisensor detector Photoelectric /Optical with base with heat and smoke combination, built intelligence as per IS: 11360 complete all as specified and directed. 51 M&L in renewal Wired Nurse Call Bell System (DC Based) For Hospital,7 TFT Touch Screen based Console,Outer casing is made out of ABS Plastics,18 Channels/Rooms,Micro controller based,12; 2A Switching Mode Power Supply,Individual rest button for each room,No computer required,Custom made options for more number of beds completed all as specified and directed. 52 Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. 53 Taking down ceiling/exhaust fan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed. 54 Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed. 55 Taking down unserviceable Sheet metal box & MCB DB SPN with MCBs of any make/capacity, complete all as specified and directed. 56 Taking down unserviceable TPN DBwith MCBs of any make/capacity, complete, all as specified and directed by Engr-In-Charge. 57 M&L concealed point wiring with PVC insulated and unsheathedelectric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No)not less than 20 mm diawith all fitting and fixing accessories and1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxesfactory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint insidefor mounting switches. sockets etccomplete for the following:- 58 One light point controlled by one switch. 59 One Ceiling fan point controlled by one switch. 60 One Exhaust fan point controlled by one switch. 61 One 3 pin socket outlet 5 Amps controlledwith one switch on the same board. 62 One 3 pin socket outlet 5 Amp controlled by one switch on independent board. 63 Description all as per item no.40 here in before but point wiring with 2.5 sqmm FRLSHconfirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire complete all as specified and directed. 64 M&L in renewal Modular switch 1 way 6A,1 module complete all as specified and directed. 65 M&L in renewal Socket, 6A - 2/3 pin combined 2 module,complete all as specified and directed. 66 M&L in renewal Modular switch 1 way 16A,1 module 15 Amp complete all as specified and directed. 67 M&L in renewal Socket 6A/16A - 6 pin combined 2 module complete all as specified and directed. 68 M&L in renewal Fan step regulator,80 to 120W - 2 module 240 volts, AC 50Hz complete all as specified and directed. 69 M&L in renewal Ceiling rose 3 terminal/pvc/polycarbonate, isolated body complete all as specified and directed. 70 M&L in renewal Bell Ding Dong, AC, 230 Volts, single pole complete all as specified and directed. 71 M&L in renewal Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete all as specified and directed. 72 M&L in renewal of Decorative ultra slim LED Tubelight fitting of LEDwith extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor forelectrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. 73 M&L in renewal modular plate White cover plate with frame2/3/4 module and provising of new modular plate of different size with flush metel boxincluding fixing ,the existing modular switchs , modular socket ,modulare regulator complete all as specified and directed. 74 M&L in renewal modular plate White cover plate with frame6/8/12 module and provising of new modular plate of different size with flush metel boxincluding fixing ,the existing modular switchs , modular socket ,modulare regulator complete all as specified and directed. 75 M&L in renewal switch piano, flush button single pole one way 5 Amp complete complete all as specified and directed. 76 M&L in renewal socket outlet, 5 Pin, 6 Amp2 in 1, flush type, universal complete all as specified and directed. 77 M&L in renewal switch piano, flush button single pole one way 15 Amp complete all as specified and directed. 78 M&L in renewal socket out let multipurpose flush type, 2 in 1 6 Pin 5/15 amps completeall as specified and directed. 79 M&L in renewal bell push flush type, 5 Amps complete all as specified and directed. 80 M&L in renewal Bell Ding Dong, AC, 230 Volts, single pole completeall as specified and directed. 81 M&L in renewal Ceiling rose 3 terminal/pvc/polycarbonate, isolated body complete all as specified and directed. 82 M&L in renewal electronic modular step rotary type fan regulator of capacity 80 to 100 Watt, 240 volts, AC 50Hz completed all specified and directed. 83 M&L in renewal Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete all specified and directed. 84 M&L in renewal Switch socket combination 2 in 1, 5 A flush type in repair complete all as specified and directed. 85 M&L in renewal Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed. 86 M&L in renewalModular Switch6 Ampone way complete all as specified and directed. 87 M&L in renewal ofModular socket6 Amp 3pin complete all as specified and directed. 88 M&L in renewal ofModular Switch16 Ampone way complete all as specified and directed. 89 M&L in renewal Modular socket6/16 Amp 3pin complete all as specified and directed. 90 M&L in renewal replacement, ofModularStep fan Regulator of 1/2 Module upto 120 Watt complete all as specified and directed. 91 M&L in renewal 35 watt bldg security light fittings with photoelectric sensor better optics for uniform distribution IP 65/66 protection LED Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60 mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqdlength of 1.5 Sqmm PVC multistranded BIS marked, 03/02 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed. 92 M&L in renewal 100 watt Street light fittings with photoelectric sensor better optics for uniform distribution IP 65/66 protection LED Heat resistance glass, pressure die cast aluminium housing including galvanised iron pipe light grade bracket bent to shape over all length 0.60 mtr fixedon pole complete including reqdlength of 1.5 Sqmm PVC multistranded BIS marked, 03/02 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed. 93 M&L in renewalof 100 wattLED flood light230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp with Photometric sensor outdoor type 220-240 volt ambient light <5-15 lux working temparature -20~+40C working humidity <93% RH along with pvc connection of 6 to 10 amp capacity with IP66 protection and colour as per required all as specified and directed. 94 M&L in renewalpost top lantern LED type 20 watt 230 watt volts AC outdoor type as gate lightwith decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. 95 M&L in renewal sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 2.5 sqmm two single core PVC insulated unsheathed FRLSH wire drawn in and including 32 mmwidth dia PVC Casing Caping medium grade including one run single core PVC insulated unsheathed 2.5 Sqmm FRLSH earth continuty wire complete all as specified and directed 96 M&L in renewal sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm two single core PVC insulated unsheathed FRLSH wire drawn in and including 32 mmwidth dia PVC Casing Caping medium grade including one run single core PVC insulated unsheathed 4 Sqmm FRLSH earth continuty wire complete all as specified and directed 97 M&L in renewal sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm two single core PVC insulated unsheathed FRLSH wire drawn in and including 32 mmwidth dia PVC Casing Caping medium grade including one run single core PVC insulated unsheathed 6 Sqmm FRLSH earth continuty wire complete all as specified and directed 98 M&L in renewal 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq.mm x 2 Core complete all as specified and directed 99 M&L in renewal 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq.mm x 2 Core complete all as specified and directed 100 M&L in renewal sheet metal Enclosurewith socket Plug top and earth plug, single pole and neutral with single pole MCB 20 Amps 240 volts in repairs complete including taking down complete all as specified and directed. 101 M&L in renewal sheet metal enclosure double door distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 100Amp,4 pole & Including MCCB 100 amps 4 pole 16 KAcomplete with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making goodthe distributed wall surfaces to match complete all as specified and directed. 102 M&L in renewal MCB DB, sheet metal enclosures double door TPN 4 way with bus bar 415 volts 2 in 1 shutter type (METAL DOOR)type with blanking plates where required and IP 43 degree protection complete all as specified and directed 103 M&L in renewal MCB DB, sheet metal enclosures double door SPN 8 way withbus bar 240 volts 2 in 1 shutter type (METAL DOOR)type with blanking plates where required and IP 43 degree protection complete all as specified and directed 104 Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable(Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 95 Sqmm 3.5 Core complete all as specified and directed. 105 -do- but 50 Sqmm 3.5 core. 106 -do- but 35 Sqmm 3.5 core. 107 -do- but 25 Sqmm 3.5 core. 108 Excavation in trenches n exc. 1.5 m wide and n exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. 109 Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. 110 Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed. 111 Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and directed. 112 Supplying and laying un reinforced precast concrete cable coverClass LV, Type I, flat size 250mm x 150mm x 40mm complete all as specified and directed. 113 S&F 4 POLE MCCB 400 Amp, 50Hz ,415V with rupturing capacity 36 KA in repair complete all as specified and directed. 114 S&F 4 POLE MCCB 250 Amp, 50Hz ,415V with rupturing capacity 36 KA in repair complete all as specified and directed. 115 S&F 4 POLE MCCB 160 Amp, 50Hz ,415V with rupturing capacity 16 KA in repair complete all as specified and directed. 116 S&F 4 POLE MCCB 100 Amp, 50Hz ,415V with rupturing capacity 10 KA in repair complete all as specified and directed. 117 Taking down unsv ceiling fans 1200/1400 sweep 230v,AC supply,single phase from site,depositing in MES store Yard,dismantling all parts,checing serviceability of all parts & continuity of copper winding (Burn out winding fan should be staking aside for rewinding) including cleaning all the components of fan, oiling ,greesing,including replacement of rusted/unsv nuts,bolts split pin rubber reel,machine screws,shafts,capacitor,clamps etc as requried,reassembling the fan and testing complete all as specified and directed.Note :(i) Testing should be done to repaired fan minimum 24 Hrs continues running in MES store yard before fixing at site complete. 118 Taking out burnt winding wire from ceiling fans(Which req rewinding) Motor of 1200/1400 mm sweep 230V AC supply,single phase,Transporting to contractor workshop for rewinding the same with super enameled copper winding wire of existing gauge/turns & sixe throughly cleaning all the components of fan, oiling,greesing,replacement of rusted/unsv nuts,bolts split pin rubber reel,machine screws,shaft etc as required reassembling the fan,testing complete & Transporting back to MES Yard complete all as specified and directed. Note :Testing should be done to repair fan minimum 24 Hrs continues running in MES store yard before fixing at site complete. 119 Taking down unsv Exhaust Fan 230/300/380/450 mm sweep 230v,AC supply,single phase from site,depositing in MES store Yard,dismantling all parts,checing serviceability of all parts & continuity of copper winding (Burn out winding fan should be staking aside for rewinding) including cleaning all the components of fan, oiling ,greesing,including replacement of rusted/unsv nuts,bolts split pin rubber reel,machine crews,shafts,capacitor,clamps etc as requried,reassembling the fan and testing complete all as specified and directed.Note:Testing should be done to repaired fan minimum 24 Hrs continues running in MES store yard before fixing at site complete. 120 Taking out burnt winding wire fromExhaust fans(Which req rewinding) Motor of 230/300/380/450mm sweep 230V AC supply,single phase,Transporting to contractor workshop for rewinding the same with super enameled copper winding wire of existing gauge/turns & sixe throughly cleaning all the components of fan, oiling,greesing,replacement of rusted/unsv nuts,bolts split pin rubber reel,machine screws,shaft etc as required reassembling the fan,testing complete & Transporting back to MES Yard complete all as specified and directed.Note : Testing should be done to repair fan minimum 24 Hrs continues running in MES store yard before fixing at site complete. 121 M&L in renewal of ball bearing(6201&6202) Suitable for Ceiling fan of any size complete all as specified and directed. 122 M&L in renewal of ball bearing(6203&6204) Suitable for Exhaust fan/Air circulator fan of any size complete all as specified and directed. 123 M&L in renewal condenser of 2.5 MFD capacity after removing existing unsv condenser from any situation complete all as specified and directed. 124 M&L in renewal condenser of 3.15/ 04 MFD capacity after removing existing unsv condenser from any situation complete all as specified and directed. 125 Taking down the water heater storage type of any make upto 50 ltrs capacity.Dismantling carefully from its position fixed on walls,descaling the inner tank,flange assembly by applying descaling solution,reassembling the same,after replacement of defective parts and reinstalling to their original location locations or as directed after commissioning and testing complete,all as direceted.Note : Any material/part found UNSV during servicing shall be replaced by the contractor and measured and paid separately under respective items. 126 Taking down the water heater for rectification of leakage in the inner shell of (Geyser)storage type of any make upto 50 ltrs capacity.Dismantling carefully from its position fixed on walls,and rectified leakage by soldering,brazing,welding at appropriate area of coppe/stainless steel inner tank of geyser and reinstalling to their original location or as direceted. Note : Any material/part found UNSV during servicing shall be replaced by the contractor and measured and paid separately under respective items. 127 M&L in renewal neon indicating lamp,rectangular/round as required at site including taking down complete all as specified and directed.. 128 M&L in renewalheating element upto 2 KW,single phase,230 volt with triangular/round base as suitable for 25/35/50 Ltr water heater complete all as specified and directed. 129 M&L in renewal thermostat switch range upto 80C suitable for 25 to 50 ltrs cap water heater complete all as specified and directed. 130 M&L in renewal PVC Connection of any make with(ISI Mark) having 10 mm dia,60cm long with steel reinforcement suitable for hot water geyser outlet supply with 02 nos of unions/cup shaped cover with washers complete all as specified and directed. 131 M&L in renewal PVC Connection of any make with(ISI Mark) having 10 mm dia,60cm long with steel reinforcement suitable for cold water geyser outlet supply with 02 nos of unions/cup shaped cover with washers complete all as specified and directed. 132 S&F in renewal 1800 Watt Pressure Washer with all accessories like Spray gun extention rod,inlet connector,inlet filter,bucket filter ,tap connector, Outlet hose 8 MTR,spray gun,foam spray bottle,Inlet pipe 3 mtr for cleaning AHU filter complete all as specified and directed. 133 S&F in renewal 1100 Watt Vacuum Cleaner and Blower ,Blue (15 litre) 3mtr long vacuum hose pipe,crevice nozzle,floor nozzle,brush inserts use for cleaning AHU filter complete all as specified and directed. 134 M & L For Descaling the Solar water heater with chemical solution complete all as specified and directed. 135 M & L for repair Solar water heater including replacingall unserviceableparts of Solar Water heater as and when required complete all as specified and directed. 136 M&L for Servicing & Maintanance ofLift (15 Passanger) Lift at New MH Gwaliorjob as per IS standard IS-14665,(2000) completedall as specified and directed. 137 M&L for Servicing & Maintanance ofLift (13 Passanger) Lift at New MH Gwaliorjob as per IS standard IS-14665,(2000) completedall as specified and directed. 138 M&L in renewalEmergency Exit light ,230 v,50 Hz.in green/red colourcomplete all as specified and directed. 139 M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4)type B-1 (using 20mm graded BTstone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in D shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed as per MES Schedule Part I & II..
Contract Date: Jan 14, 2026 Contract Value : ₹ 35.92 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Madhya Pradesh View Result →
26.
Defence #8590701 AOC
Tender For Special Repair To Tank Outlet Gi Pipe, Rain Water Pipe, Kitchen Cabinate And Ci Drainage System Of Bldg No P-480 At Mil Stn Kota.; 1 Dismantling of rain water pipes of any dia/bore in any position from high rise (upto 30 mtrs high) (MAP Bldg G+5) buildings alongwith fittings and accessories taking out from walls, if required complete all as specified and directed. 2 S & F 160mm dia PVC(SWR) single socketed soil waste pipes in any length with rubber ring joints including bend and branch pieces of required size and fixed to wall upto 30 meter height with necessary fixing arrangement such as clamps, nuts, bolts etc and making good the disturbed surface complete all as specified and as directed. Note- Safety equipments such as helmets, belts, hooks, clamps and necessary insurance for worker shall be provided by the contractor and the same shall deemed be included in the quoted rates. 3 Fixing only 160mm dia PVC(SWR) single socketed soil waste pipes in any length with rubber ring joints including bend and branch pieces of required size and fixed to wall upto 30 meter height with necessary fixing arrangement such as clamps, nuts, bolts etc and making good the disturbed surface complete all as specified and as directed. (Note- (i) Safety equipments such as helmets, belts, hooks, clamps and necessary insurance for worker shall be provided by the contractor and the same shall deemed be included in the quoted rates. (ii) Old surveciable pipes obtained from item here in before shall be reused.) 4 M&L for 160 mm dia PVC (SWR) bend any redious pipes single socketed, in any length with rubber ring joints, fixed on wall of high rise (upto 30 mtrs high) (MAP Bldg G+5) Bldg complite all as specified and directed. 5 S & F for Pipe Supporting Clamping - Single Pipe of dia 160 mm (6) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3): Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 75 mm (3) made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 2. Continuous Slotted C Channel with ribs to be used of size 250 mm (10) made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied+ Zn Al Flake coated with material thickness of 3mm.3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns).Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3) - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10) - 1 No.; 3. U Bolt Rubber sleeve mounted for 110 mm (4) CI or PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2) - 4 nos. Note : work will execute in Map Bldg G+5 hight 24 Mtr 6 Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and as directed. 7 M & L for walling (curved on plan to a mean radius exceeding 6 metre) of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar (1:6) complete all as specified and as directed. 8 Extra over stone walling of lime or sand stone for hammer dressing to face stones and dressing of face beds and joints with maximum depression of face from straight edge held against the dressed surface not exceeding 40 mm, of random rubble walling, uncoursed or brought upto course complete all as specified and as directed. 9 Material and labour for plastering 15 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. 10 Preparation of newly plastered surfaces on walls and applying three coats of white wash complete all as specified and as directed. 11 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. 12 M & L for cement concrete M15 (Nominal Mix) using 12.5 mm nominal size coarse aggregate in roof kerbs or mud stops,padding, rounded or chamfered on edges complete all as specified and as directed. 13 Taking up or down 15 mm bore of steel tubing and connections, including cleaning for refixing or removal to store or taken on schedule of credit complete all as specified and as directed. 14 Taking up or down 20 mm bore of steel tubing and connections, including cleaning for refixing or removal to store or taken on schedule of credit complete all as specified and as directed. 15 S & F CPVC pipes for potable hot and cold water distribution, nominal size 15 mm, pressure class 1, SDR 11 including plain CPVC fittings of pressure class 1, SDR 11 on walls/ ceiling or laying in floors complete all as specified and as directed. 16 S & F CPVC pipes for potable hot and cold water distribution, nominal size 20 mm, pressure class 1, SDR 11 including plain CPVC fittings of pressure class 1, SDR 11 on walls/ ceiling or laying in floors complete all as specified and as directed. 17 Cutting chases in brick walls to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., not exceeding 10 cm girth and making good the same with cement concrete M15 (Nominal Mix) using 12.5 mm nominal size coarse aggregate or cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 complete all as specified and as directed. 18 Fixing only to walls and ceilings or laid in floors 20 mm nominal bore, any grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed. 19 S & F for Pipe Supporting Clamping - Single Pipe of dia 160 mm (6) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3): Pipe Support Clamping made of1. Profile Bracket having Wall Distance 75 mm (3) made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 6923923.2. Continuous Slotted C Channel with ribs to be used of size 250 mm (10) made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied+ Zn Al Flake coated with material thickness of 3mm.3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3) - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10) - 1 No.; 3. U Bolt Rubber sleeve mounted for 110 mm (4) CI or PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2) - 4 nos. Note : work will execute in Map Bldg G+5 hight 24 Mtr. 20 S & F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm size, minimum weight 210 grams complete all as specified and as directed. 21 Disconnecting existing water tanks capacity exceeding 250 litres but not exceeding 500 Litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required, reconnecting and re-fixing in position (cleaning repairing, etc. measured separately) etc complete all as specified and directed. 22 Cleaning and removing all scale and dirt, etc. from water tanks capacity exceeding 250 litres but not exceeding 500 Litres and from mouths of circulating pipes, etc. complete all as specified and as directed. 23 Dismantling water tanks capacity exceeding 250 litres but not exceeding 500 Litres and removing to store complete all as specified and as directed. 24 S & F rotational moulded polyethylene tripple layer water tanks, white colour (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes complete all as specified and as directed. 25 S & F ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm size, minimum weight 210 grams complete all as specified and as directed. 26 S & F in repairs 20 mm gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed to pipe complete all as specified and as directed. 27 Dismantling of wrought or mild steel work of any description not otherwise described into primary parts complete all as specified and directed. 28 S & F in renewal water tank cover / lid in round shapeof any size of approved make and colour as approved by GE complete all as specified and directed. 29 S & F hot rolled medium and high tensile structural steel of grade E 250 quality C conforming to IS 2062: 2011 as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. 30 S & F cast aluminium alloy handle, cast type, 75 mm size, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed. 31 S & F butt hinges, extruded aluminium alloy with galvanised mild steel wire pin, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996, hinge designation 100B21 as per IS 205: 1992 complete all as specified and as directed. 32 S & F in repairs hexagonal wire netting, size of aperture 25 mm, dia of galvanised steel wire 1.40 mm as per IS 3150: 1982 fixed with tinned tacks of wire staples complete all as specified and as directed. 33 Preparation of newly or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. 34 S&F in renewal of 17-19 mm thick modular membrane kitchen cabinet door shutters and shelves (made out of HDHMR boards) in wood grain colour and half round edges, complete all as specified and directed. 35 S&F 16-18 mm wide & 1mm thick PVC edge banding pasted to edges of PVC furniture with suitable adhesive, complete all as directed. 36 S & F ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed. 37 S & F auto close hinges three dimentional adjustment with suitable mounting plate of extruded brass with nickel plated for corrosion resistance, bright finished for cubboard and cabinet shutters complete all as specified and directed. 38 S & F cast brass handle, cast type, 100 mm size, nickel chromium plated finish as per service grade number 2 of IS 1068: 1993 complete all as specified and as directed. 39 M & L for PVC sheet lipping, 6 mm thick for 12 mm thick, block board, veneered particle board, prelaminated particle board fixed with nails complete all as specified and as directed. 40 M & L for grubbing up tree trunk for tree having girth exceeding 100 cm but not exceeding 150 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, stacking of serviceable material and removing of unserviceable material to a distance not exceeding 50 m and clearing site complete all as specified and as directed. 41 M & L for grubbing up tree trunk for tree having girth exceeding 30 cm but not exceeding 100 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, stacking of serviceable material and removing of unserviceable material to a distance not exceeding 50 m and clearing site complete all as specified and as directed. 42 S & F in renewal 15 mm dia brass CP fancy wall mixer with L Bend (including provision of overhead shower & hand shower) for mixing hot & cold water screwed down for iron pipe complete with hand shower and tube.complete all as specified and as directed. Make :- CERA cat part No F 2014401 /Jaquar cat pat no FUS 29273UPR / Hindware cat part No F 780020XCPor techno commercially equivalent makes specified in PS. 43 S & F in renewal of Bib taps 15mm dia,chromium plated, long body,with CP flange all as perfixed in repairs complete all as specified and as directed. Make :- CERA cat part No G 1017152 /Jaquar cat pat no VGP-81037/ Hindware cat part No F 740011or techno commercially equivalent makes specified in PS. 44 S & F in renewal 15 mm nominal size, nonrising spindle type fancy with long shank and cup concealed stop valves as per IS 8931: 1993 made of cast brass including Knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed. Make :- CERA cat part No2002361/ Hindware cat part No F 850096C / Jaquar cat part No ALD-CHR 083RP or techno commercially equivalent Makes as specified in PS. 45 S&F in renewal of 15mm bore angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union as per hindware cat part No F 740039/Cera cat part No G1017201/Johnson cat part No T 2610 C 4 Complete all as specified and directed. 46 S & F in renewal of pillar taps, 15mm dia, long body/swan neck, fancy type suitable for fixing to wash basin screwed for iron pipe and fixed with necessary fittings and including PVC connection complete all as specified and as directed.Make :- CERA Cat Part No F1003103 / Jaquar cat Part No COP -021PM/ Hindware Cat Part No F 740002 or techno commercially equivalent makes specified in PS. 47 M & L in renewal of PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. 48 S & F in renewal of PVC valveless, symphonic action type, flushing cistern, 10ltr capacity. Low level, white with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull or lever, complete as specified and as directed. Make- CERA Cat No B1010102L/ Johnson cat part No J 85821Cor techno commercially equivalent makes specified in PS. 49 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 50 M&L Glazed ceramic coloured tiles on vertical surfaces 350x 250x7 mm/450X300X7mm/ 300X600X7-8mm/ 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10 mm thick rendering in CM 1:4 backing, complete all as specified and directed. Make :- Kajaria (Impression)/Johnsons (Elite Plus)/ Somany (Juene Glossy). 51 M & L for cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate as in floor 25 mm thick in sub base for laying tiles, pavings, floorings etc. complete all as specified and as directed. 52 M&L for joint free non skidceramic coloured tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6,complete all as specified and directed. Make :- Kajaria Pavigres matt finish/Johnsons Elite plus Matt Finish/ Somany Plain star Beige Matt Finish.
Contract Date: Jan 13, 2026 Contract Value : ₹ 35.71 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 7
Rajasthan View Result →
27.
Defence #8506499 AOC
Tender For Day To Day Maintenance Including Certain Other Misc Works, Joinery And Internal Wiring To Md And Otm Accn At Coochbehar Mil Stn Under Ge (S) Binnaguri.; 1 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified. 2 Taking down chowkats or frames with shutters (with out taking off shutters from the frames) area not exc 1.5 Sqm each and macking good distrubed surface and finished as per existing srufaces complete all as specified. 3 Taking down aluminium door/ window shutters any size and refixing in the same opening after repair/replacement of defective accessories/any part like handle, hinges, tower bolt, beading, rubber packing, lock, any aluminium shutter part, screws, door stopper, glass etc. upto the complete all as specified.Notes:(i) Glass shall be measured and paid separately under relevant item as supply only.(ii) The quoted rates shall be inclusive cost of handle, hinges, tower bolt, beading, rubber packing, lock, any aluminium shutter part, screws, door stopper and nothing extra shall be admissible on this account. 4 Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified 5 Dismantling timber scantlings 40 sqcm and over in section, in any position unframed work complete all as specified. 6 Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified. 7 Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing etc complete and makinggood disturbed surfaces of walls/ceilings etc complete all as specified. 8 Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing etc complete and makinggood disturbed surfaces of walls/ceilings etc complete all as specified. 9 Taking down chowkat with shutter exc 1.5 sqm and n.exc. 4.00 sqm each (without taking off shutters from the frame) and making good distrubed surfaces with PCC (1:2:4) type B1 for holdfast, rendring in CM (1:4) and match as per existing surfaces finisheses complete all as specified. 10 Taking down of wooden door shutter of any description area exceeding 1 sqm and n.exc. 2 sqm each complete all as specified. 11 Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premises complete all as specified. 12 Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified. 13 Demolition of cement concrete (Unreinforced) Concrete of any description and in any position not otherwise specifically provided complete all as specified. 14 Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m incl roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified. 15 Taking down cement or cement lime plaster on stone / brick wall, ceiling including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified. 16 S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified. 17 S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified. 18 S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. 19 S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. 20 S&F 110mm bore PVC (SWR) bends any radius complete all as specified. 21 S&F 75mm bore PVC (SWR) bends any radius complete all as specified. 22 S&F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified. 23 S&F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified. 24 S&F 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified. 25 S&F 75mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified. 26 S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified. 27 S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified. 28 S&F 110mm bore PVC (SWR) vent cowl complete all as specified. 29 S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified. 30 S&F in repairs 75mm bore PVC (SWR) floor/ nahani/ multi floor trap with CP grating any type including jointing with solvent cement complete all as specified. 31 S&F in repairs 110mm bore PVC (SWR) P’ or S trap complete all as specified. 32 S&F factory made solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, in opening as specified and shown on drawing made on section 8 of SSR 2020 Part-II complete all as specified. 33 S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement & fixing in the frame at site as shown on drawing in section 8 of SSR-2020 Part-II complete all as specified. 34 S&F 75mm size stainless steel butt hinges with mild steel hinge pin complete all as specified. 35 S&F 100 mm size aluminium handles cast type anodised complete all as specified. 36 S&F aluminium anodised barrel tower bolt of extruded section 100 mm long complete all as specified. 37 Supply only 4/4.8 mm thicksheet glass, ordinary quality in square exceeding 0.5 Sqm in each pane, complete all as specified 38 S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified. 39 S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified. 40 M&L for fabrication and fixing of anodised powder coated (minimum thickness of powder coating 50 micron) aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium frame of size 101.6 mm x 44.45 mm x2.01 mm and section of bottom and top rail of section 114 mm x 44.45 mm x 2 mm and lock rail shutter frame of 83 mm x 44.45 x 2 mm with and including panels of 5.5 mm thick plain/ forsted float glass, and with anodised aluminum snap beading of size 18.20 mm x 16.66 mm screwed for fixing fully including all neceassary fittings and EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter, 1 No heavy duty 200 mm long aluminium tower bolt and 3 Nos 125 mm long stainless steel butt hinges per shutter including taking down old one complete all as specified. 41 Supply and fix 0.50mm thick prepainted galvalume polyester coated (SMP coating) coloured metal roofing sheet trapezoidal profile having tensile strength 550Mpa as in roof covering fixed with self drilling screws with EPDM washer etc complete all as specified. 42 Ditto all as per item No 41.00 above but as in eaves board complete all as specified. 43 M&L for Second class hard-wood in scantlings timber fixed clean sawn complete all as specified. 44 S&F aluminium anodised snap grid false ceiling to support the boards / tiles with aluminium Tee section 35 mm x 25 mm x 1.40 mm cross Tee 23.50 mm x 23.50 mm x 1.40 mm and aluminium angle 25 mm x 25 mm x 1.40 mm as on edge / sides including hanging proper hanging arrangement with 4 mm dia anodized galvanised iron wire and adjuster complete all as specified. 45 S&F 4mm thick (E-Boards) Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling complete all as specified. 46 S&F 15mm bore steel water tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc (concealed or on surface) complete all as specified.Note:- The quoted rates shall be inclusive cost of cutting chases in walls, etc. and their making good. 47 S&F 20mm bore steel water tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc (concealed or on surface) complete all as specified.Note:- The quoted rates shall be inclusive cost of cutting chases in walls, etc. and their making good. 48 Refixing of reusable GI pipes of 15/20mm bore after necessary cleaning and renewal of GI fittings as required in new or old position (Walls, ceiling, floors, etc.) all as specified.Note: (i) GI tubing retrieved against relevant item shall be reused.(ii) New GI fittings required shall be supplied by the contractor and quoted rate shall deemed to be inclusive cost of the same. 49 S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with polythene foam insulation as intermediate layer and closed top) double layer ISI marked (IS: 12701 : 1996), hoisted and fixed in position all as specified in SSR Part I including inlet, outlet and over flow connections etc including dismantling existing tank complete as specified. 50 S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with polythene foam insulation as intermediate layer and closed top) double layer ISI marked (IS: 12701 : 1996), hoisted and fixed in position all as specified in SSR Part I including inlet, outlet and over flow connections etc including dismantling existing tank complete as specified. 51 S&F 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed as required to use reducer and check nut complete as specified. 52 S&F in repairs 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete as specified. 53 S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. 54 S&F in repair 15mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. 55 Disconnecting existing tanks of capacity exc 250 Ltrs and n. exc 500 Ltrs, setting aside (or lowering if required) for repairs with all necessary fitting as required, cleaning, etc. and hoisting if required reconnecting and re-fixing in same position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc and writing date of cleaning and next due date of cleaning with synthetic enamel paint complete all as specified. 56 Disconnecting existing tanks of capacity exc 500 Ltrs and n. exc 1000 Ltrs, setting aside (or lowering if required) for repairs with all necessary fitting as required, cleaning, etc. and hoisting if required reconnecting and re-fixing in same position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, and writing date of cleaning and next due date of cleaning with synthetic enamel paint complete all as specified. 57 S&F factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete without glazing bars including taking down old existing windows and making good distrubed surfaces with PCC (1:2:4) type B1 for holdfast, rendring in CM (1:4) and match as per existing surfaces finisheses complete all as specified. 58 S&F factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete with glazing bars including taking down old existing windows and making good distrubed surfaces with PCC (1:2:4) type B1 for holdfast, rendring in CM (1:4) and match as per existing surfaces finisheses complete all as specified. 59 S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane including steel pin and hackingout old broken glass panes complete all as specified. 60 S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified. 61 M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. 62 M&L for framed work such as grills, gratings, etcwith ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified. 63 S&F pressed steel frames of size 125mm x60 mm x(1.25mm thick) for doors with one or more rebates including supply and fixing necessary lugs, hinges, lock strike plate, etc. including one soap coat of priming complete all as specified.Note:- The sizes/dimensions and type (profile) of frames shall be as shown in I.S. 64 S&F pressed steel frames of size 105 x60 mm x(1.25mm thick)for doors with one or more rebates including supply and fixing necessary lugs, hinges, lock strike plate, etc. including one soap coat of priming complete all as specified.Note:- The sizes/dimensions and type (profile) of frames shall be as shown in I.S. 65 M&L for providing plain cement concrete (1:3:6) type C-1, (using 20 mm graded crushed stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating including necessary form work as required complete all as specified. 66 S&F factory made 35mm thick plain framed, panelled shutter with second class hard wood rails and styles (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified. 67 M&L for 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified 68 M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. 69 S&F 150 mm size aluminium handles cast type anodised complete all as specified. 70 S&F aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified. 71 S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified. 72 S&F 300mm size, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified. 73 S&F 140mm (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified. 74 M&L for glazed ceramic coloured tiles/ digital elevation tiles of size 300 X 450 X 7-8 mm/300 X 600 X 7-8 mm thick as on vertical surfaces of wall such as skirting, dado, riser etc. in Bath, WC and Kitchen set and jointed in neat cement slurry and pointed in with tile grout of approved make to match the surface of tile as approved by Engr-in-Charge complete all as specified. 75 M&L for 10 mm thick rendering/ backing coat in CM (1:4) as in vertical surfaces of skirting, dados etc complete all as specified. 76 M&L for non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, laid over and including 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified. 77 M&L for non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, laid over and including 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified. 78 M&L for non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, complete all as specified. 79 M&L for 25mm thick (average) PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) stone aggregate as in roof padding, levelling course including cleaning of existing surface complete all as specified. 80 M&L for vitrified ceramic tiles 10 mm thick (square/rectangular) light shade, area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement sluury and pointed in white or coloured cement to match the shade of tile laid over and including over 15mm thick screed bed in CM(1:6) complete all as specifierd and as directed. 81 All as per item No 80.00 but as in skirting 10 cm height complete all as specified. 82 S& in repair vitreous China Urinal, Half stall type, white (including flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified. 83 S&F in repair urinal spreader of CP brass for fixing with 15 mm dia pipe complete all as specified. 84 S&F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete including PVC seat cover of same make complete all as specified. 85 S&F in repair vitreous China one piece EWC white including duroplast soft close seat cover complete all as specified. Make: Cera Cat No. A1014110 & 11 or technocommerically equivalent make/model in Jaquar/ Plumber/ Nycer 86 S&F in repairWater Closet (squatt pattern) of vitruous china squatting pan of pattern ORRISA pattern size 580 x 440 mm white with integral foot rests (including flush pipe) including PVC P or S trap and connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified. 87 S&F in repair 10 ltr capacity dual type PVC flushing cistern low level white colour including PVC connection, PVC flush pipe of required length complete all as specified. 88 S&F in repair 15mm bore PVC Connection with PTMT nut of length 600 mm complete all as specified. 89 S&F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified. 90 S&F in repairs braided Stainless Steel 450mm long Connection Pipe Hose CP For Wash Basin, Kitchen Sink, Geyser complete all as specified. 91 S&F in repairs Bib taps fancy type, brass chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule complete all as specified. 92 S&F in repairs Health faucet brass chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and CP wall hook including making conncetions and fixed in position complete all as specified. 93 S&F in repair 15 mm bore fancy type bib taps long body (two in one) brass material, 15 mm bore single handle and wall flange with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified. Make:- CERA Cat part No. F-1015163 or of Techno commercially equivalent model in other approved make. 94 S&F in repair brass chromium plated shower rose 125 mm size with shower arm 150 mm long with swivel joints for fixing with 15 mm bore GI pipe complete all as specified 95 S&F in repair 15 mm bore angle/ stop cock CP brass with flage complete all as specified. 96 S&F in repairs stop valves fancy type, brass chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union complete all as specified. 97 S&F in repairs beveled edge mirror of size 600 x 450 mm, mounted on 6 mm thick AC plain building board or PVC board and fixed to wall on wooden plugs with chromium plated brass screws and cup washers complete all as specified. 98 S&F in repair stainless steel curtain rod of 25 mm dia and thickness not less than 0.75 mm fixed with curtain rod holder and finials etc. complete all as specified. 99 M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC in order to maintain proper slope over existing roof surfaces for applying roof treatment work finished even and smooth without using extra cement complete all as specified.Note: Water proofing compound shall be measured and paid perarately under relevant item of schedule A. 100 M&L for PCC (1:2:4) type B1 (20mm graded crushed stone aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound 200 ml per beg of cement or as per manufacturer instructions finished even and smooth on exposed concrete surface without using extra cement all complete as specified and directed. Note: Water proofing compound shall be measured and paid perarately under relevant item of schedule A. 101 Material and labour for water proofing treatment with following application over roofs surface complete all as specified : -(i) Applying bituminous primer at the rate of 0.4 Litres/Sqm on prepared surfaces of roof. Surface shall be kept free, till the primer is impregnated and the solvent oil in the primer get evaporated.(ii) Applying one coat of blown type bitumen of grade 85/25 as binding material at the rate of 1.2 Kg/Sqm.(iii) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.0 Kg/Sqm, black finish reinforced with non woven polyster matt, with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturers instruction including preparation of surface.(iv) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.Note :- (a) The water proofing treatment shall be carried out by the manufacturer or his authorised applicators in terms of clause 11.43 of MES Sch Part-I (2009).(b) After completion of roof treatment work ponding test for 48 hrs shall be carried out by the contractor and cost for the same shall be . 102 Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified. 103 S&F for corner glass shelf 225x 225mm with CP steel frame complete all as specified, complete all as specified. 104 S&F factory made uPVC white colour Sliding window three track made of extruded profiles with wall thickness of 2.3mm (+-0.2mm).Window profile with hollow section with multi chamber. Frame (88mmx52mm), sliding sash (42mmx67mm). Sliding meah Sash (24.5mmx57mm) sliding interlock (One vertical length in each shutter) (45.5mmx28mm), glazing bead (24.5x16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2+ -0.2mm thick galvanised steel frame (30mmx18mm) 2no, sliding sash (30mmx18mm), sliding mesh sash (26mmx10mm) Profile to be inserted in required profile, frame will be fixed to the wall with 8mmx100mm long fastenerers, Hardware (Touch lock of zine alloyed (white poweder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and required accessories including 4.8mm thick sheet glass including taking down old windows. (Note: The unit rate quoted by contractot includes cost of glass, wire cloth and all other connected accessories. Net Opening will be measured for payment purpose)(A)Area not exceeding 2 Sqm Each 105 S&F in repairs 300mm size, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete 106 S&F in repairs aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified. 107 S&F in repairs 150 mm size aluminium handles cast type anodised complete all as specified. 108 S&F in repairs 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified. 109 S&F in repair brass chromium plated tubular towel rail, 20mm dia and 0.80mm thick, D type, 60cm long between flanges complete all as specified. 110 S&F in repairs Toilet Paper Holder chromium plated, including all necessary fittings, connections etc complete all as specified. Make – Jaquar Cat Part No CAN 1151N or of Techno equivalent model in other approved make. 111 S&F in repair fancy type swan neck pillar taps, brass with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete all as specified. 112 S&F in repairs wash hand basin vitreous China, white, flat back (550x400mm) including cutting for and pinning ends of brackets and waste coupling of Bass CPfor basin etc with long screwed shanks and fly nuts, full threaded flage embedded in white cement incl PVC waste pipe required length complete all as specified 113 S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified 114 S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe 15mm bore and fixed complete all as specified 115 M&L for preparing of old oil bound distempered surfaces of wall including cornices, pilasters, and other wall features etc by washing, rubbing down and stopping and applying two coat of oil bound distempering (oil emulsion) on the same including chak whiting on plastered surfaces, prepara-tory to distempering complete all as specified. 116 M&L for preparation of the surface and applying 1.00mm thick (average thickness) wall care putty on wall complete all as specified . 117 M&L for preparing old decorated plastered or un plastered surfaces of ceiling including cornices, pilasters, and other wall features etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds mass and efflorescent salts and trading oil and greasy spots etc and applyingone coat of white washing on the same all complete as specified. 118 M&L for preparation old decorated wooden painted surfaces and applying one coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth complete all as specified. 119 M&L for preparation of old painted surfaces ofany description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel painting on steel surfacescomplete all as specified. 120 M&L for preparation of old wall surfaces any type by wire brushing, brooming, dusting & finally washing with water to clear the cracks absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in cement mortar 1:3 and applying two coats of exterior acrylic emulsion paint all as per manufacturers specification and as specified. 121 M&L for preparation of old wall surfaces any type by wire brushing, brooming, dusting & finally washing with water to clear the cracks absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in cement mortar 1:3 and applying one coat of exterior acrylic emulsion paint all as per manufacturers specification and as specified. 122 M&L for 15mm thick rendering in CM 1:4 on faces ofstone brickwork or concrete surfacewalls finished even and smooth without using extra cement complete al as specified. 123 M&L for preparation of new decorative plastered surfaces of wall and applying two coat of exterior acrylic emulsion paintover a one coat of alkali resistant primer complete all as specified. 124 Taking down the old UNSV copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified. 125 M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sundn terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications.Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed for the following :-(a) One light point controlled by one way switch 5/6 amps. 126 (b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps. 127 (c)One socket out let 5/6 amps point on the independent board 128 (d)One bell/buzzer point controlled by one bell push button 129 (e) One light point controlled by two two way switch 5/6 amps. 130 All as per item Ser No 125 here-in-above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed. 131 M&L point wiring with FRLS PVC insulated unsheathed multistranded copper conductor,conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20/25mm size medium grade PVC doubled lock Casing-Capping and fittings, including, pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminatedsheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed. (a) One light point controlled by one way switch 5/6 amps. 132 (b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps. 133 (c)One Socket out let 5/6 amps point on the independent board 134 (d)One bell/buzzer point controlled by one bell push button 135 S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed. 136 S&Fswitch piano type 2 way 5/6 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge. 137 S&Fsocket 3 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed. 138 S&F socket outlet 2 in 1, 5 Pin, 5/15 amp,multipurpose 230 volt flash type complete all as specified and directed by Engr-in-Charge. 139 S&F Switch socket combination 3 pin in replacement ,5A, multipin,flushtype 140 S&FSwitch socket combination 3 pin 16A in replacement,multi pin, flushtype 141 S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed. 142 S&F bell/buzzer push 5/6 amps flush type white/ivory finish complete all as specified and directed. 143 S&F call bell ding dong typeAC Single pole 220/240 Volts, surface type complete all as specified and directed. 144 S&F in repair switch piano flush type 5/6 amps single pole one way complete all as specified and directed. 145 S&F in repair socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed. 146 S&F in repair socket outlet 2 in 1, 5 Pin, 5/15 amp,multipurpose 230 volt flash type complete all as specified and directed by Engr-in-Charge. 147 S&F modular switch type 5/6 amps single pole one way complete all as specified and directed. 148 S&F Socket, 6A - 2/3 pin combined 2 module, white ivory finish modular type complete all as specified and directed. 149 S&F Socket, 6A/16A- 2/3 pin combined 2 module, white ivory finish modular type complete all as specified and directed. 150 S&F modular switch type 15/16 amps single pole one way complete all as specified and directed. 151 S & F Metal flush box 3 modulecomplete all as specified and directed. 152 S & F Metal flush box 6 modulecomplete all as specified and directed. 153 S & F Metal flush box 8 modulecomplete all as specified and directed. 154 S & FWhite cover plate with frame, 3 module complete all as specified and directed. 155 S & FWhite cover plate with frame, 6 module complete all as specified and directed. 156 S & F White cover plate with frame, 8 module complete all as specified and directed. 157 S&F in repairCeiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified and directed. 158 S & F in repair lamp holder, isolated body, with back plate suitable for batten/anglefittings complete all as specified and directed. 159 S&F of stepped type modular electronic fan regulator 120 watt 2 module suitablefor 1200/1400 mm sweep energy saving fans,ISI marked complete all as specified and directed. 160 S&F LED lights fitting 1x 20W, 220V AC decorative box type with driver,IP 20, class I, wall/ surface mounted, integrated type with extruded aluminium housing integrated high efficiency electronic driver and surge suppressor of 4KV or more, luminaire efficiency not less than 120 lumens/watt, power factor not less than 0.90, CRI 80, THD 10%, operating range - 140 to 270 V, 50 Hz fixed connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all accessories internally prewired and including necessary taking down the old unserviceable fitting complete all as specified. 161 S & F LED bldg security light fittings 35 Watt ,230 VAC outdoor type with high pressure die cast aluminium housing, heat resistant, toughned glass cover with IP66 protection and surge suppressor of 7.5 KV or more, luminaire efficiency not less than 120 lumens/watt, power factor not less than 0.90, CRI 80, THD 10%, operating range - 140 to 270 V, 50 Hz fixed connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all accessories internally prewired and including necessary taking down the old unserviceable fitting complete all as specified. 162 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp,IP 20, class I, wall/ surface mounted, luminaire efficiency not less than 100 lumens/watt, power factor not less than 0.90, CRI 80, THD 10%, operating range - 140 to 270 V, 50 Hz including connecting up with three core flexible copper conductor cable of suitable size complete. 163 S&f LED recessed mounted light (600×600)mm35/36 watt suitable for indoor spaceand surge suppressor of 4KV or more, luminaire efficiency not less than 100 lumens/watt, power factor not less than 0.90, CRI 80, THD 10%, operating range - 140 to 270 V, 50 Hz fixed connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all accessories internally prewired and including necessary taking down the old unserviceable fitting complete all as specified. 164 S&F in repair Mirror Light 9/10 Watt LED with constant current electronc driver, all accessories including provision of three core PVC cable of copper conductor and making connection and including necessary taking down the old unserviceable fitting complete all as specified.. 165 S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with din rail (as per OEM), 415Volt IP-20 protection suitable for fixing MCBS/lsolators with andincluding taking down old one complete all as specified and directed. 166 S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with din rail (as per OEM), neutral link, earth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface andincluding taking down old one complete all as specified and directed. 167 S&F MCB, Single pole & neutral 32 amps, 240 volts, ‘C’ curve, 10 KAall completeincluding taking down the old one andincluding taking down old one complete all as specified and directed. 168 S&F MCB, Single pole, 6 to32 amps, 240 volts, ‘C’ curve, 10 KAall completeincluding taking down the old one complete all as specified and directed by Engr-in-Charge. 169 M & L Sub main wiring casing caping type with two run single core cable PVC insulated cable with6.0Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulatedcable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly anddrawing into rigidPVC casing capingof size 32 mm medium gradesize,making good the disturbed surfacescomplete including taking down old submain wiring.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. . 170 M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washersincluding necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and saltPCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed by Engr-in-Charge.
Contract Date: Dec 24, 2025 Contract Value : ₹ 44.96 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 7
West Bengal View Result →
28.
Defence #8497181 AOC
Tender For Periodical Services & Misc B/R Repair Work To Certain Bldgs In N-5/ N-6 Area At Af Stn Chakeri Kanpur; 1 M & L for preparation of old decorated surfaces and applying one coat of white wash on walls,complete all as specified and directed. 2 All as per sl item No 1, here-in-before but applying two coat of white wash on walls ,complete all as specified and directed. 3 All as per sl item No 1,above but one coat of white wash on ceiling ,complete all as specified. 4 M & L for preparation of old painted steel and iron surfaces of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. 5 M & L for preparation of old painted surfaces of wood and wood based materials of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint all as specified and as directed. 6 M&Lfor preparation of old painted steel and iron surfaces surfaces of any description, not otherwise described over 10cm width or girth not otherwise described and applying one coat of Aluminium paintall as specified and as directed. 7 M & L for preparation of old distempered surfaces of walls including corinces pillars etc and applying one coat of Oil Bound Distemper, all as specified and directed. 8 All as per sl item No 7 here-in-before but on ceilings ,complete all as specified and directed.. 9 All as per item no. 7 but two coat two coat of oil bound distemper,complete all as specified and directed. 10 M&L for preparation of old decorated surfaces of walls and applying one coat of cement based paint with automatic hydrualic air less electric sprayer single phase min flow wheel cast for comportable transported complete all as specified and directed. (Note Rate is including of portable DG set for providing electricity including fuel and other accesssries) 11 All as per sl item No 10 but applying two coat of cement based paint. ,complete all as specified and directed. 12 M&Lfor complete removing of external treatment including Washing, rubbing down and stopping of distempered and painted surfaces on wall, ceilings etc ,complete all as specified and directed. 13 M& L for applying 1 mm thick wall care putty on wall or ceiling surface including sanding and rubbing for smooth surface complete all as specified and as directed. 14 Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc., all as directed. 15 M&L rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement, all as specified. 16 M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement, all as specified. 17 M & L for preparation of new undecorated surfaces of walls and applying two coat of Oil Bound Distemper over a coat of primer and 1mm thick wall care putty, all as specified and directed. 18 M & L for preparation of new undecorated surfaces of walls and applying two coat of cement based paint over a coat of primer, all as specified and directed. 19 Complete removalof existingtreatment on plastered or unplastered surface of wall or ceilingincl cleaning the surface with the help of hand held /long hand scraper / sander and preparing the surface smooth incl necessary repair to scartches/cracks etc by filling cracks upto 3mm withcrack fill paste by filling compound as directed by Engr-in-Charge . Note : (1)Where it is not possible to usescraper/grinder for removing existing treatment, manually operated hand tools is to be used. 20 Preparation of surfacewith appling onecoat exterior water based primer with airless spray technology with max working pressure of 3300 psi and capeable of operatingsingle spray gun with a max material house length of 30 mtr .the spray should be of reputed make as speacified byxpresspainting and as mentioned in PSRecommended byxpress painting. 21 Applying two coats of exterior weather proof amto alga 100% acrylic smooth emulsion with eight year of performance warranty byAsian WC all Guard and WClong life by Asian appliied using air less techonlogy with max working pressure of 3300 psi and capable of operational single spray gun with a maximum material hose length 30 mtr the spray should be of repute make as specifiedby paint supplier and as mentioned in PSand accessories for appling the exterior emulsion should be able to spray in hard toreach areas and achive the good woundingand penetration of paint on the surface to achive exelentappliction using limited manpower. 22 Providing and applying high quality acrylic modified resin based texture of dholpur /red sand stone pattern with anti alaae and UV resistante properties to be applied as intermediate finish in desiered pattern @ 43.04 Kg /10 Sqm to form film of 1-1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface ,followed by top coating with premiumacrylic smooth paint with silicon additive of reuqired shade by two or more coats @ 1.43 ltrs /10 sqm complete all as specified and directed. 23 Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 & n.exc 500 ltrs of capacity. Note : Date of cleaning shall be written on tanks after cleaning by synthetic enamel paint. 24 Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 500 & n.exc 1000 ltrs of capacity. Note : Date of cleaning shall be written on tanks after cleaning by synthetic enamel paint. 25 M&L forapplying two coats of Exterior emulsion painton old surface completeall as specified and directed. 26 Rooting out trees, flora & faunaand foliage as grown on RCC roof surfaces and brick walls by cutting hole into slabs/walls for digging out roots and using chemical to burn deep rooted tree roots etc and making good dirturb portion of wall/roof with cement concrete 1:2:4 type B 1 complete all as specified and directed. 27 M&L forremoval of existing surface finish of wall and ceilings and applying two coats of Exterior Weather Emulsionover a coat of exterior wall primer all as specified and directed. 28 M&L preparation of old surface of wall or ceiling and application of one coat of exterior weatheremulsion paint over a coat of exterior wall primer complete all as specified and directed. 29 M & L for preparation of old surfaces of walls including corinces pillars etc and applying one coat of plastic paint for interior decorative of walls with the help of roller paint brish all as specified and directed. 30 Demolition of cement concrete unreinforcedin ground floor andanythickness ,description and in anyposition not otherwise described , complete all as specified and directed. 31 M&L 75mm thickcement concrete type C-2 1:3:6mix (40 mm graded aggregate) as in flooring/paving/plinth protection,including finishing even & smooth w/ousing extra cement, complete all as specified and directed 32 M&L for preparation of surfaces of roads,bituminous rigid, pavement, flexible pavings, aprons, kerbsand the like exceeding 10 cm width or girth as in lines dashes, arrows, letters etc and applying with one coat of aqua based road making paint of tint white or golden yellow or Orange or as required at site complete all as specified and directed. 33 S&F in repairDoor closer aluminium extrudedhydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed,complete all as specified and directed. 34 S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed ,complete all as specified and directed. 35 S&Fin repair Floor door stopper 150 mm length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor ,complete all as specified and directed. 36 S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed. Including taking down existing wire mesh 37 S & F Ball valves of 20 mm , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 38 S & F Ball valves of 15 mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule . 39 S & F 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and PVC Flush pipe 32 mm dia complete all as specified and directed. 40 DismantlingofStone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc ,complete all as specified and directed. 41 M&LMachine cutkota stone slab flooring 20-25mm thick over cement Screed bed or bedding layer of cement mortar 15 mm thick for laying floor finisheslaid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. 42 Taking down Shutters of any descriptionnot exc 1 sq. m but not exc 2 Sqm eachand refixing the same in same openning after easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed. 43 Dismantling of Wallandceilingboards(fibre, pulp, insulation, etc.) or insulationboards/slabs/ blankets, any thickness, including cover ,complete all as specified and directed. 44 S&FSolid PVC Wall Lining consisting of 5mm thick Plain colour single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing ,complete all as specified and directed. 45 S&F5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing,complete all as specified and directed. 46 S&F 12mm thick semi perforated micro tegular edged false ceiling at all height with GRG(glass fiber reinforced Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and pattern having moisture content less than 2% humidity resistance of 99%, NRC 0.5 to 0.5 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light resistance of 85% to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of .33 mm thick (galvanised @ 120 grams per sqm including both side ) comprising of main T- runner of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm, suspended from ceiling using galvanised mild steel items (galvinising 80 gm per sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fastener, 6mm dia fully threaded hanger rod of any required length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.4 mm. galvanised with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screw. the work shall be carried out as per specification, drawing and as per directed and specified. Make - Diamond Ceilings 47 Refixing only the depressed/saggedportion ofexisting false ceilinggrid system ofany descriptionafter taking down existingceiling board of any description and refixing the same in position. Note- The quoted unit rate include supply and fixing4 mm dia GI bar hanger and fly clipif required in refixing. 48 S&F 16mm thick of size 595 x 595mm or 600 x 600 mm mineral fibre false ceiling board of pattern classic lite RH -99 (Bevelled tegular) of armstrong or equivalent make including taking down old ceiling board from existing snap grid complete all as specified and directed. 49 S&F 12mm thick false ceiling at all height with GRG(glass fiber reinforced Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and patternof daimondor equivalent make including taking down old ceiling board from existing snap grid complete all as specified and directed.
Contract Date: Dec 22, 2025 Contract Value : ₹ 25.38 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Uttar Pradesh View Result →
Arunachal Pradesh View Result →
30.
Defence #8400393 AOC
Tender For Comprehensive Maintenance Of Lift Installed At New Galley P-89 Bldg At Ins Agrani; Materilal and Labour for Comprehensive maintenance / repair and servicing of one electrically operated lifts of Capacity 08 Passenger of 544 kg serve for (G + 4) floors complete through Platinum Maintenace Agreement with M/s TK Elevators India Pvt Ltd. for one year incl range of components for reasons related to normal wear and tear as per Note No 1(i) at the following location in INS Agraniall as specified and directed by Engineer- in-charge :-(a) 08passenger lift of 544 kg atP 89 building used for(G+ 4) floors. Make of lift : TK ElevatorsNote :-1. Terms for Component replacement by OEM( Platinum Maint Agreement)(i) Coverage shall be inclusive of, ropes, inverter systems, and controller parts to be inclusive of printed circuit boards. Machine replacement is excluded however repair is included. Sub components inclusive of roller bearings, solenoids, coils Line chock, brake shoe liners, Door Lock contacts,contactors, relays, push buttons, door operator VVVF drive, car door safety device limit switches, governor,hoist way door locks, indicators and other minor mechanical parts shall also be included except as excluded elsewhere. Contractor will submit copy of platinum maintenance agreement with M/s TK Elevators within 10 days after issuence of acceptance letter by Accepting officer. Work order for the work will be issuedafter verification of Platinum maintenance agreement with M/s TK Elevators. General Notes :- (i)The comprehensive maintenance shall be done through OEM of the lift i.e. M/s TK ELEVATORS.(ii)The contractor shall inter into an MOU(Memorandum of understanding) with the OEM or their authorised agency for maintenance of lift.The above comprehensive AMC certificate shall be provided by the contractor in favour of AGE(I) Agrani before commencement of work,after acceptance of CA.(iii)All the parts shall be genuine and shall be from original equipment manufacturer(OEM) and shall be as approved by AGE(I).(iv)All stainless steel parts such as lift car enclousure,opening doors,jumps,cills etc shall be thoroughly cleaned to remove rust,stains etc with suitable solution.The contractor shall also clean maintain properly the machine room, machinaries and lift as directed by Engr-In-Charge. The rates quoted for respective items shall be deemed to include for the same.(v)Any breakdowns/complaints shall be attend and rectify within 12 Hrs. If the complaint not attended and rectified within 24 Hrs, Panalty of Rs 2000/- per day will be charged.(vi)The rates quoted for above items shall be included for replacement of any minor spares,consumables accessories like fan,light/cabin light,alarm,ups batteries and all other connected items becoming unserviceable during the contract period and nothing extra will be charged.(vii) Major spare parts if any found defective during the period of contract to be replaced as catered here in after and shall be measured and paid separetely under relevant items.(viii) The contractor is responsible to carried out periodical routine check up(Monthly/Quartely) through OEM(Once in a month) or as per the direction of Engr-In-Charge to ensure the serviceability and proper functioning of lifts in all respect(Each month will be considered as 01 Job)(ix)The contractor is responsible to clean/Empty the lift pit with necessary equipments and make lift operational ( If water found filled in the pit during rainy season)the rates for the same is deemed to be included in the quoted rate.(x) The contractor should ensure all provisions as laid down by State/Central Govt, Labour Commissions. Employees provident fund payments, Employee Insurance, minimum fair wages, working conditions.(xi) Renewal of Lift Insurance and Licence to be made from the Lift licence issue authority Govt of Tamil Nadu and display certification of lift license in lift car etc are to be complied No extra payment shall be made on account of renewal of license. (xii)Well trained, service engineer/technicians deputed by OEM are to be employed at site for lift maintenance.Prior approval in this regard is to be obtained from AGE(I) Agrani.(xiii)The work will be of continuous in nature without Sundays, Holidays or Strikes and the contractor must employ lift technicians for the work when necessity arises.(xiv) The service engineer/technician should ensure the serviceability of the lifts for every odd situation.The contractor should ensure full safety and security of personnel deployed. Any casualty or injury sustained by the service engineer/technician during the currency of thecontract at the defence premises shall be sole liability of the contractor.(xv) All tools & plants or transport required for carrying out comprehensive maintenance and necessary stationary & documents (log book) records at each lift installation will be arranged by the contractor and nothing extra will be admissible on this account.
Contract Date: Dec 09, 2025 Contract Value : ₹ 1.62 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Tamil Nadu View Result →
31.
Defence #8300150 AOC
Repair/Renewal Of External Periodicals After Removal Of Existing Treatment For Bldg No P-185, P-186 And P-193 At Trv At Icgas Daman
Contract Date: Nov 17, 2025 Contract Value : ₹ 16.65 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Daman And Diu View Result →
Karnataka View Result →
Himachal Pradesh View Result →
Himachal Pradesh View Result →
35.
Defence #8272101 AOC
Tender For Certain Repair To Geyser, Fans And Other Misc Items At Af Stn Awantipur; 1 Taking down carefully electric geyser of any type and capacity complete opening of the geyser and replacing the defective parts including disconnecting electric and water supply connection and reassembling after cleaning and replacing defective parts and re-installing the same in original position and making necessary electric and water supply connection and testing complete all as specified and directed by Engineer -in-Charge.Note :-Any accessories found unserviceable that shall be replaced under respective items of this Sch 2 Supply only, syphon assembly with rubber gasket, including nuts, bolts, washers etc of following capacity geysers:- 3 (a)50 Ltrs capacity geysers. 4 (b)35 Ltrs capacity geysers. 5 (c)25 Ltrs capacity geysers. 6 Supply and fixing in repairs 15mm bore GI tubing , medium grade, with all fitting fixed to wall and flores etc , making holes, complete all as specified and directed by Engineer -in-Charge .Make:Tata/Prakash Surya/Jindal. 7 Supply only inner tank, vessel made of MSsheet 22 gauge all as specified and directed by Engineer-in-ChargeISI marked factory madefor suitable pressure following capacity:- 8 (a)50 Ltrs capacity . 9 (b)35 Ltrs capacity. 10 (c)25 Ltrs capacity. 11 Supply and fixing of Heating element capacity 1.5 KW (Round/Triangular) ISI marked suitable for geyser (as per sample) complete all as specified and directed by Engineer-in-Charge Make-Microne/Globo. 12 All as per srl item No-05 above but capacity 2 KW. 13 All as per srl item No-05 above but capacity 3 KW. 14 Supply onlyglass wool heat insulation superior quality suitable for geyser of capacity 25/35/50 Ltrs. 15 Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessoriessuch as safety valve, thermostate, NRV, connection piece etc. complete all as specified and as directed. 16 Supply and fixing of PVC insulated shethed cable 3 core flexible copper conductor of size 2.5 sqmm fire proof make:Havells/Gloster/Polycab 17 Supply and fixing of drain plug for geyser. 18 Supply and fixing of safety valve for geyser. 19 Supply and fixing of indicator lamp for geyser of any type as per existing in geyser. 20 Supply and fixing of thermostat switch suitable for 50/35/25 ltrs capacity geysers as per sample. 21 Supply and fixing of push type thermostat switch suitable for 50/35/25 ltrs capacity geysers as per sample. 22 M&L for spray painting to water heather of capacity25 Ltrs to 50 Ltrs capacity by spraying two coats of synthetic enamel paint after filling cavities with filler and cleaning dust etc complete all as specified and directedby Engineer –in-Charge incl writing MES number. 23 Taking down existing unserviceable outer cover and supply and fix new outer cover of geyser capacity 25 Ltrs complete all as specified and directed by Engineer–in-Charge. 24 All as per Srl item No 16 above but capacity 50 ltrs. 25 Taking down unserviceable bottom cover plates (2 half) and supply and fix with new bottom cover plates with machine columns of geyser of capacity 25/50 Ltrs. 26 Supply and fix in replacement MCB single pole 240 volts any rating from 20 amps, with rupturing capacity 10 KA, class c ,including providing thimble for out going cables. Make:- Legrand(DX 3 )/ Siemens (Betagard)/Schneider (Acti-9) 27 S&F of PVC connection mesh type for cold/Hot water as per sample . Complete all as specified and directed by Engineer-in-Charge 28 S&F 15 Amps three pin socket suitable for metal clad Make-Schenider/Legrand/Hagger 29 S&F 15 Amps three pin Top suitable for metal clad Make-Schenider/Legrand/Hagger 30 S&F stop valve cast copper alloy screwed down with butterfly or crunch handle of size 15mm bore ISI marked. All as directed and specified by Engr-in-charge Make :- Neta, Jindal, Gem, Parko 31 S&F single pole and nuetral enclosure with two pin and earth plug and socket completewith one single pole MCB up to 20 Amp ,240 Volts complete. 32 Replacement of old unserviceable anchor bolt with anchor bolt 12mm 100mm long complete all as specified and directed (Note- Achor bolt shall be grouted with hammer drill only). 33 Disconnecting electrically dismantling and taking out electric energy meter any type and capacity and depositing to MES Store Yard complete all as specified and directed . 34 Repair to electronic energy meter single phase/three phase up to 60 Amps after disconeeting proper electric coneection from main board and refixing in same or other location incl sealing properlead seals and wires as required complete all as specified and directed . 35 S&F in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 1.5 sqmm complete drawn in and includindg casing caping ISI marked of suitable size and its accessories along with 1x 1.5 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified. 36 S&F in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 4 sqmm complete drawn in and includindg casing caping ISI marked of suitable size and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified. 37 S&F in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 6 sqmm complete drawn in and includindg casing caping ISI marked of suitable size and its accessories along with 1x 6 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified. 38 Supply and fixing in replacement Meter box IP-65 for 3 meters with triangular locks of size 300x450x170 mm transparent LID of Cat part No Mi 0400 T of Hensel or equivelent to HPL /Indoasian includingcutting and chases wall and removing old metal or wooden box and fitted new box and match the disturbed surface with existing specification by required PCC andplastering workall as per directed . 39 S&F in replacement of sheet metal enclosure DB SPN 2 way, single door, 230 volts AC, surface mounting complete for MCB DP/SPN as incomer & MCB SP as outgoing complete all as specified.(For Bldg Security light) 40 S&F in replacement of sheet metal enclosure DB SPN 8 way, double door, 230 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB DP/SPN as incomer & MCB SP as outgoing complete all as specified.Make: Havells/L&T/Legrand 41 S&F in replacement of sheet metal enclosure DB TPN 4 way, double door, 415 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB TP/TPN as incomer & MCB SP as outgoing complete all as specified. 42 S&F in replacement of MCBs, SP, 6-32 Amps, 230 volts,10 kA rupturing capacity, B curve type complete all as specified. Make : L&T/Havells/ABB 43 S&F in replacement of MCBs, SPN, 40-63 Amps, 230 volts, 10 kA rupturing capacity, C curve type complete all as specified. 44 S&F in replacement of MCBs, TPN, 40-100 Amps, 415 volts, 10 kA rupturing capacity, C curve type complete all as specified. 45 S&F in replacement offan capacitor with wire terminals of capacity 2.5 Mfd, 230 volts AC all as specified. 46 S&F in replacement of fan capacitor with wire terminals of capacity 3.15 Mfd, 230 volts AC all as specified. 47 S&F in replacement of fan capacitor with wire terminals of capacity 4.0 Mfd, 230 volts AC all as specified. 48 S&F in replacement of rubber reel suitablefor ceiling fan/Ex fan/cabin fan of any type/make/size all as specified. 49 S&F in replacement of down rod of 1 height fabricated out of MS pipe 10 mm dia heavy duty duly painted with white paint suitable to hang ceiling fan of any description, make and model complete all as specified. 50 S&F only in replacement of heavy gauge ceiling fan hanging clamp fabricated out of MS flat with nut bolts with split pins complete all as specified 51 M&L for overhauling of fan of any type and any make by opening, cleaning, greasing, oiling of fan motor after testing the faults including replacement of minor parts and re-assembling complete all as specified.(Note: Spare parts & winding shall be measured and paid separately). 52 S&F in replacement of ball bearing suilable for ceiling/ exhaust/ cabin/ wall/ pedestrial fan of any type/ make/ size all as specified. 53 S&F in replacement of bush suitable for ceiling/ exhaust/ cabin/ wall/ pedestrial fan of any type/ make/ size including namda if required all as specified. 54 S&F in replacement Fan dimmer 6electronic dimmers, 450W, 250V flush type on the exiting phenolic laminated sheet etc. as reqd and as specified and directed. 55 Transportation of rotor of fan to work shop for rewinding/repair work and returning back to site complete all as specified.(Note:- Rewinding will be measured and paid separately.) 56 M&L for removing old/burnt winding, cleaning of slots/pitches by using cleaning material by removing the insulating materials and then rewinding (i.e renewal of winding) the fans with appropriate/same gauge of super enamelled copper wire and insulating material, varnishing, drying the winding for adequate periodto remove the moisture content and strengthening the winding and testing to the speed and flow of the fans any make all as specified for the following type of fans:-(a)Ceiling fan 1200/1400 mm sweep 57 (b)Exhaust fan 300/380/450 mm sweep 58 (c)Wall mounted/cabin fan 400/450 mm sweep 59 S&F in replacement of fan blades heavy duty of any make suitable for exsiting pattern and colour scheme including screws all as specified for following type of fans:-(a)Ceiling fan 1200/1400 mm sweep (set of three blades) 60 (b)Exhaust fan 300/380/450 mm sweep 61 (c)Wall mounted/cabin fan 400/450 mm sweep 62 (d)Pedestal fan 400/450mm sweep 63 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed 64 S&F of Ceiling fan canopy made up of plastic of desired colour complete with taking down the Fan and reinstall after fixing of canopy to the Fan complete all as specified and as directed. 65 M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI wire 4 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board /panel/ test point at the other including watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 20 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil complete all as specified. 66 S&F earth continuity conductor or main earthing lead fixed to wall on batten or reccess or chases or burid in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing or as required of size 4 mm dia galvanised iron wire complete all as specified. 67 S&F in replacement LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. Complete all as specified and as directed. 68 S&F in replacement LED Building security light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete. Complete all as specified and as directed. 69 Supply and fixing GI Bracket bent to shape fabricated with GI Pipe 40mm dia light grade 1.5m long including mounting clamps nut bolts complete all as specified and directed. 70 Note:-An amount of Rs. 20,149.50 on account of credit schdule for Sch A Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.
Contract Date: Oct 15, 2025 Contract Value : ₹ 9.78 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Jammu And Kashmir View Result →
Karnataka View Result →
Karnataka View Result →
Punjab View Result →
Punjab View Result →
Punjab View Result →
41.
Defence #8120119 AOC
Tender For Repair / Maintenance To Joinery Work, Sunken Floor, Roofs, Cleaning Water Tanks 0N Roof, Stairs, Sanitary Items And Other Misc Works At Af Basant Nagar/ Pinto Park Under Age B/R-Ii At Ge (Af) Palam Delhi Cantt-10; 1 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and directed. 2 Demolition of concrete in ground floor and pavings n.exc 15 cm thickness below or above ground level complete all as specified and directed. 3 Roughening surfaces of old concrete /terrazzo floor by picking, sweeping clean andwashing down with water to removedust, etc. complete all as specifiedand as directed. 4 M&L for joint free anti skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular)area of each tile exceeding 0.11sqm but n.exc. 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. 5 Description all as per item 4.00 above but as in skirtings laid over and including 10mm thick plaster in CM (1:4) complete all as specifiedand as directed. 6 M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular)area of each tile n.exc. 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. 7 M&L for joint free coloured glazed ceramic tiles in vertical surfaces of size (300x200)mm x7mm thick/ (450x300)mm x7mm thick, set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick cement rendering in cement mortar (1:4) complete all as specified and as directed. 8 M&L for coloured glazed ceramic tiles in vertical surfaces of size (600x300)mm x7mm thick, set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 10mm thick cement rendering in cement mortar (1:4) complete all as specified and as directed. 9 M&L for digital glazed vitrified tiles, 10mm thick (squre or rectangular)area of each tile exceeding 0.36sqm, in floors etc. with using 5mm spacers and joint filled with epoxy grout, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. 10 Description all as per item 9.00 above but as in skirtings laid over and including 10mm thick plaster in CM (1:4) complete all as specifiedand as directed. 11 M&L for 75 mm thick cement concrete (1:3:6) type C2, (using 40 mm gradedstone aggregate) as in hard standing/pavings/plinth protections, finished even and smooth without using extra cement,complete all as specified and as directed by Engineer-in-Charge. 12 M & L for machine pressed, glossy finished 25 mm thick coloured cement concrete chequered tiles of size 300mm x 300 mm of pattern as approved, set,jointed and pointed in neat cement slurry mixed with pigment in floorslaid over and including 15mm thick screed bed with cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge. 13 M&L for Durastone vitrifiedtiles coloured, light shade 10 mm thick, area of each tile exc 0.06 butnot exc 0.36 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. 14 Hacking out old broken glass, any thickness, size, quality, or description from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete upto 4th storey building complete all as specified and as directed. 15 Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specifiedand as directed. 16 M&L for brick work with sub class `B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specifiedand as directed. 17 M&L for brick work with sub class ‘B’ bricks, straight or curved on plan of any radius in half brick thick wall builtin cement mortar (1:4) complete all as specified and as directed. 18 Description all as per srl item no. 16 but except bricks complete all as specified and as directed. 19 Taking down cement plaster/cast in situ terrazo of any description on brick walls or concrete surfaces etc. including raking out joints, hacking for keys, scrubbing down with water complete all as specified and directed by theEngineer-In-Charge. 20 M&Lfor 10 mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceilings, to befinishedeven and smooth without using extra cement complete all as specifiedand as directed. 21 M&L for 15 mm thick cementplaster on fair faces of brick work or concrete surfaces in cement mortar (1:6), to befinishedeven and smooth without usingextra cement complete all as specified and as directed. 22 M&L for 15 mm thick cementplaster on fair faces of brick work or concrete surfaces in cement mortar (1:4), to befinishedeven and fair mix with water proofing compound by weight as per manufacturers instructions including necessaryscaffoldingup to (G+3) storey complete all as specifiedand as directed. 23 M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of white wash complete all as specifiedand as directed. 24 M&L for preparing oldsurfaces on ceilings including brooming down by mechanicaly, scraping down and applying two coats of white wash complete all as specifiedand as directed. 25 M& L for preparation of new plastersurface of walls, chajjas, soffits & beamincluding necessary scaffolding and applying 3 mm average thick cement base wall care putty and two coats of acrylic smooth exterior paint of required shade1.43ltr/10sqmover a coat of exterior primer 2.20kg/sqmall as per manufacturers instructions complete all as specifiedand as directed. 26 M&L for prepration of old decorated plastered surfaces of walls /ceilings, removal of nails etc & filling cracks/hole by applying cement base wall careputty as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat oil bound distemper white or coloured complete all as specified & directed by Engineer-in-Charge. 27 M&L for preparationold decorated surfaces of walls and cornices, spoiled bysmoke soot, moulds, moss and efflorescent salts and tradingoily and greasy spots by scraping and washing with water and applying one coat of cement base paint complete all asspecifiedand as directed by Engineer-in-Charge. Note:- The work shall be carried out upto four storey building. Necessay scafolding upto fourstorey bldg shall be deemed to be included in unit rates. 28 M&L for preparationold decorated surfaces of walls and cornices, spoiled bysmoke soot, moulds, moss and efflorescent salts and tradingoily and greasy spots by scraping and washing with water and applying two coats of cement base paint complete all asspecifiedand as directed by Engineer-in-Charge. Note:- The work shall be carried out upto four storey building. Necessay scafolding upto fourstorey bldg shall be deemed to be included in unit rates. 29 M&L for preparation of plastered or un plastered old decorated surfaces of wallsremoval of nails etc & filling cracks/hole by applying cement base wall careputty as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat of exterior emulsion paint 100% acrilic of approved white or colouredcomplete all as specified & directed by Engineer-in-Charge. Note:- The work shall be carried out upto four store. Necessay scafolding upto fourstory bldg shall be deemed to be included in unit rates. 30 M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. 31 M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 32 M&L for preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. 33 M&Lforpreparationofoldpaintedsurfacesofsteelandiron surfacesofany descriptionnototherwise described over10cm width&girth and applying onecoatof synthetic enamelpaint complete all asspecified and as directed. 34 Taking down shutters of any description area exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed. 35 Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n exc. 1.5 sqm each complete all as specified and directed.Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. 36 Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exc. 1.5 sqm but n exc 4 sqm each complete all as specified and as directed.Note:- The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. 37 Refixing of shuttersafter easing and adjusting also refixing builders hardware as required including renewal of unserviceable screws, etc of any description area n. exc 1 sqm each in same opening complete all as specified and as directed. 38 Refixing of shuttersafter easing and adjusting also refixing builders hardware as required including renewal of unserviceable screws, etc of any description area exc 1 sqm but n exc 2 sqm each in same opening complete all as specified and as directed. 39 S&F rolled mild steel grade Fe-290 Gde-E-165 quality-A as in framed work as in doors or gates of angle or other section gates of with gusset plates, rails, cladding, chowkhats/frame or like etcwelding hold fast, hinges complete all as specified and as directed. 40 M&L for2nd class hard wood clean sawn timber framed and fixed in chowkats or frames scantlings complete allas specified and as directed by Engr-in-Charge. 41 S&F pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applyinga shop coat of red oxide primer including providing PCC (1:3 :6) type C-0 (using 12.5 mm graded crush stone aggregate) for filling hollow portion of chowkhats complete all as specified and as directed. 42 S&F pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applyinga shop coat of red oxide primer including providing PCC (1:3 :6) type C-0 (using 12.5 mm graded crush stone aggregate) for filling hollow portion of chowkhats, complete all as specified and as directed. 43 M&L in repair for MS works as in holdfast, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging holdfasts, grills, cladding and similar small articles conforming to Fe 290 Gde E-165, complete all as specified and as directed. 44 M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregates) as for holdfasts, etc including necessary formwork, complete all as specified and as directed. 45 S&F factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded,edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass/gauzeetc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); in second class hardwood, complete all as specified and as directed. 46 S&F 35mm thick factory made plain, framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed. 47 S&F 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. 48 S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as specified and directed. 49 S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed by Engineer-in-Charge. 50 S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with particle board core 2, 4, or 6 raised panel design with both side 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face &back face, supplying & fixing in frame at site as per specification & drawing. 51 S&Ffactory made 18 mm (+0.7mm thick celuka PVC board of density 600 kg/cum manufactured by an ISO 900-2008 certified company having one side perlaminated and other side plain fixed as in cabinet/ cupborad shutters including provding manufactures test reportand test certificate is mandatory with each and every supply of material including taking down of existing shutter or any kind of PL board or plyboard complete all as specified and as directed. 52 S & F factory made 18 mm (+0.7mm) thick celuka PVC board of density 600 kg/cum manufactured by an ISO 900-2008 certified company fixed as in shelves perlaminated/ cabinet/cupboard drawers including provding manufactures test reportand test certificate is mandatory with each and every supply of material including taking down of existing shelves or any kind of PL board or plyboard completed all as specified and directed. 53 S&F factory made 5 mm thick PVC sheet of density 600 kg/cum manufactured by an ISO 900-2008 certified company, plain 5 mm thick PVC sheet panelling for back side (wall side) and also manufactures test reportand test certificate is mandatory with each and every supply of material including taking down of exiting back side (wall side)or any kind of PL board or plyboard complete all as specified and as directed. 54 S&F in repair 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screwsto timber frame-work as in Kitchen drawers, Cupboard shutters etc, complete all as specified and as directed by Engineer-in-Charge. 55 S&F 0.90 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions complete all as specified and as directed by Engineer-in-Charge. 56 M&L for 18/19 mm thickpreleminated particle board, interior grade, prelaminated one sidewith decorative choice lamination & other side balancing white lamination, fixed with screws to timber framework including 10 mm thick IInd class H.W leaping all round as in shelves of design as approved by Engineer in charge etc and including dismantling boardingany description fixed with screws complete all as specified and as directed by Engr-in-Charge. 57 M&L for Plywood 6mm thick (5 Nos of ply), grade BWR, type BB, fixed with screws to wooden frame work complete all as specified and as directed by Engineer-in-Charge. 58 M&L for Plywood 9mm thick (5 Nos of ply), grade BWR, type BB, fixed with screws to wooden frame work complete all as specified and as directed by Engineer-in-Charge. 59 M&L for Plywood 12mm thick (7 Nos of ply), grade BWR, type BB, fixed with screws to wooden frame work complete all as specified and as directed by Engineer-in-Charge. 60 M&L for powder coatedaluminium anodisedframe work as inpartition wall /Doors/windows/ ventilators/ sliding shutters by using suitable section conforming to IS-733 and IS-1285 and coating grade A-153 conforming to IS-1868 &fixed with rawl plug and screws or with fixing clips with expansion hold fasteners including necessary joining cleats, glazing clips, rubber packing, anodisedaluminium snap grid beading etc gap of junction at top and bottom and sides filled with PVC Neoprene felt including necessary provision of aluminium grills to windows/ventilators etc complete allas specified & directed by Engineer-in-Charge.. Note : a) Aluminium section shall be of non rusted and bright finish completely (internal & external side) . (b) Aluminium section shall be mechanically jointed wherever required.(c) Aluminium section size shall be approved by GE (d) Aluminium section snap gird, cleat, angle shall be screwed with chromium plates brass screw as directed by Engineer-in-charge. (e )The weight for all necessary fitting such as cleats, glazing clips, rubber packing, anodisedaluminium snap grid beading etc pvc item/raw plug material/bass screw etc which are required for fabricationshall not incuded in the weight of aluminium for the payment . The weight of aluminium section shall only be cosidered. No extra payment for fabrication matarial shall be paid. 61 S&Faluminium powder coated door shutter, aluminium section wt 0.55 Kg/m including neccesary joining cleats, glazing clips,rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading screw etc. complete all as specified and as directed by Engineer-in-Charge.Note:-Minimum thickness of aluminium section shall be 2.5 mm and minimum thickness of anodizing shall be 15 microns. 62 S&Faluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised, handle 2 nos in each window aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer-in-Charge.Note:-Minimum thickness of aluminium section shall be 2.5 mm and minimum thickness of anodizing shall be 15 microns. 63 S&F aluminum anodised grill DG-102 (10mmx5.2mm) of Decorative grill or equivalent fixed with F section size not less than 20.60mmx15.20mmx1.5mm thick of approved make complete all as specified and as directed. Note:- Minimum thickness of anodizing shall be 15 microns. 64 S&F powder coated anodised aluminium three track sliding type glazed window shutter with 5 mm thick plain sheet glass fixed open track section 100mmx38mmx1.5mm having three track (two of glass & one of stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aparture 1.40mm) with members of window shutters of section 38mmx12mmx1.5mm and other standard sliding section including all necessary fiber wheel rollers suitable handles to facilitate sliding and all necessary jointing cleats, glazing clips, rubber packing, aluminium snap beading etc complete all as specified and as directed. Note:-Cost of other consumables required for the item shall be deemed to be included in the quoted rate. The rate of Glass panes / Bakelite sheet /wire Cloth / Mortice lock /locking stay /floor spring / floor door stopper shall be measured and paid separately under respective items. 65 S&F 5.50mm thick,tinted sheet glass of any colour, selected qualityand fixed tosnab beading and gasket etc for aluminium door & window/ventilate complete all as specified and as directed. 66 Supply only for 6mm thick bakelite sheet prelaminated both side with decorative choice laminations for aluminium frame work with including rubber beading or gasket for aluminium section complete all as specified and directed. 67 S&Fdoor closer hydraulically regulated designation No 3 universal typesuitable for door shutter of 851 to 1000 mm in width of aluminum body (die cast) weight between 61 to 80 kg complete all as specified and as directed. 68 S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other party made of mild steel heavy duty complete all as specified and as directed. 69 S & F brass mortic lock vertical type size 100mm 4 levers complete all as specified and as directed. 70 S&F in replacement of steel window box type made of ERW hollow section of size 130mm x 65mm x 1.25mm thick double rebate comprises gauged and glazes sekelton shutter ERW Section 50mm x 20mm x 1mm thick double shutter with leaf and arrangments for cooler operning including iron grill bar with 12mm square complete welded to frame with vertical muilon of size 130mm x 65mm with 1.25mm thick ERW box typer including holes cutting holes for hold fast (04 Nos each window) and making good dismantled protion with PCC (1:2:4) type B-1 including following fittings welded to frame / shutter :- (a) Hold fast of 150mm long of flat iron 25mmx3mm made to shape-04 Nos each window. (b) MS Handle cold rolled of size 100mm long - 01 No per leaf (c) MS Tower bolt 100mm long- 02No per leaf(d) Z-section 20mmx25mm long stopper - 01No per leaf. (e) MS pintle hinges of size 40mmx25mm -2 Nos per leaf including one coat of red oxide shop primer complete all as specified and as directed. Note:- Wire mesh, sheet glass, painting etc shall be measured and paid separately under respective items. 71 S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed. 72 S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed. 73 M&L for framed work such as grills, gratings etc with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. 74 S&F window/Ventilator section of frame (72 x 55) mm fixed to wall or concrete surface with MS hold fast (30 mm x 5 mm section ) 150 mm long made of galvanized steel powder coated and section of shutter (47 x 20) mm, mullion section (72 x 50) mm (base steel as per IS 513 D quality galvanized as per IS 277 with zinc of 120 Gms/Sqm ) glazed or gauzed and wire gauze shutter (Double door shutter) with total coated thickness of 0.60mm including powder coated grill/guard bars made of square bars 10mm dia at 150mm c/c horizontal spacing fixed in MS flat frame (30 mm x 5 mm) fixed to windows frame with screws, including 4 to 5 mm thick sheet glass, 0.36 mm stainless steel wire cloth with 1.40mm aperture necessary fittings and all builders hardware such as handles, tower bolts and stays etc complete all as specified and as directed.Type - 4000 series ref Drg No CEAF/STD-191/2014 SH 1/2 & 2/2 75 S&F 30mm width of flaps Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and as directed. 76 S & F 40 mm dia, cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and as directed. 77 S&F mild steel 300 mm size ordinary rat tail rod pattern springs including roller and roller plate , etc complete all as specified and as directed. 78 S&F brass door magice eye of following specification material:- resin lens + zinc alloy, top diameter:31.2 mm, Bottom diameter: approx 24mm, pipe diameter: approx16mm, total length:approx 50mm, inner hight :approx 36mm, application : 35 to 60mm thick, viewing angle 200*all round and clear view of 200* of surrounding without opening the door –unique design, ultra clear view and superior finish,wide angle, best in class lens for all round visibility, the outsider cannot hide anywhere, the back cover protects you from the outsider observirg any movements inside, easy to install with in-built screw over a wide range ofdoor thickness from 35mm to 60 mm etc required at site complete all as specified and as directed by Engineer-in-Charge 79 S&F Hasp & Staple, 125 size, safety type aluminium anodised with mild steel hinge pin including bolt, to hinge plate and fixed with screws, complete all as specified and as directed. 80 S&F in repair drapory rod 25mm dia fancy type mild steel plastic coated inculding wooden funnel and wooden brackets, complete all as specified and as directed. 81 S&F aluminium alloy, anodised, sliding door bolt 300mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. 82 S&F 150 mm long aluminium anodised, handle of extruded section fabricated type anodised and fixed, complete all as specified and as directed. 83 S&F aluminium, anodised, barrel tower bolts 150mm size of extruded section, complete all as specified and directed. 84 S&F 125mm long aluminium, anodised, handle of extruded section fabricated type complete all as specified and as directed. 85 S&F aluminium, anodised, barrel tower bolts 125mm size of extruded section, complete all as specified and directed. 86 S&F butt hinges, stainless steel, 100mm size, complete all as specified and as directed. 87 S&Fsheet glass 3mm thick, ordinary quality and glazing with oil putty / wooden beads in square or rectangular in section n exc 0.5 sq.m in each pane complete all as specified and as directed. 88 S&F stainless steel wire cloth0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifiedand as directed. 89 S&F figured glass or pin headed type 4mm thick area n exc 0.5 Sqm each and glazing with oil putty,complete all as specified and as directed. 90 S&F floor door stopper of aluminium alloy body 140mm cover plate and tounge, anodised with hard-drawn steel spring fixed in floor complete all as specified and as directed. 91 S&F auto closing hinges openable at 0 degree for cabinet shutters complete all as specified and as directed. Make :-Hettich, Ebco, Prime 92 S&F 50mm magnaetic catches with brass body and striking plate including letting in as fixed, complete all as specified and as directed. 93 S&F stainless steel telescope channel of size 500mm, complete all as specified and as directed. 94 S & F in repair mild steel mortic lock vertical type size 100mm 4 levers complete all as specified and as directed. 95 S&F in repair venetian blind vertical or horizontal consisting of head rail, vanes/louvers 1to 4 wide (as required) of approved tint and traverse cord fixed in position complete all as specified and as directed. 96 M&L for solid PVC wall lining consisting of 5mm thick supreme prelaminated colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and as directed. 97 M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and as directed. 98 Dismantlingplain or corrugated steel sheeting any gauge, thickness, incuding Nainital or similar patternsheets in roofcoverings complete all as specified and as directed. 99 S&F mild steel work (FE 290 Grade E-165) roof trusses (framed), trussed, purlins, crane, gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc. complete all as specified and as directed. 100 S &FPre- paintedgalvalume aluminiumzinc coatingGI basedcorrugatedsteel sheet0.50 mmthickof anycolourhavingtensilestrengthof 550Mpa as in roof covering/cladding to fix the wall fixed with self taping screws with rubber washers etc complete all as specified and as directed.Note:-Pattern, design and colour shall be as approved by GE/ Engr-in-Charge. 101 S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws with rabber washercomplete all as specified and as directed. 102 Dismantling ceiling board, any size or description, fixed in any position or in any thickness, including cover fillets with nails complete as specified and as directed. 103 Providing & fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size (595x595)mm of approved texture, design and patterns having moisture content less than 2% , humidity resistance of 99%, NRCO .50 to 0.75 as per IS 8225:1987, noncombustible as per BS 476 (Part 4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size (15x32) mm of length 3000mm, cross-T of size (15x32) mm of length 1200 mm and secondary intermediate cross -T of size (15x32) mm of length 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size (85x25x2) mm, galvanised iron perimeter wall angle of size (24x24x0.40)mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws complete all as specified and as directed. 104 M&L for special treatment for sunken portion of WCs/Bath & toilet etc executed in following stages:-Stage 1:Cleaning of all foreign material such as fungus,mass, dust etc by brushing and dusting, sprinkle water on surface, surface shall be levelled with a layer of 20 mm thick CM (1:4) mixed with water proofing admixture WPC @3% by weight ofas per manufacturers insturctions.State 2 : Primer-Mix Tarfelt LM of STP Ltd (diluted with water in ratio 1:1) @ 250 gms/sqm and apply the primer on the plastered surfaces.Stage 3 : Application of 1st coat of Tarfelt LM of STP Ltd (without dilution with water) @ 1Kg/Sqm by brush all as per manufacturers instructions.Stage 4:Laying fibre glass cloth (weight not less than 50gram/ Sqm) over the 1st coat while the coated surface is still sticky.Stage 5:After 6 to 7 hours interval, apply second coat i.e. final coat of Tarfet LM of STP Ltd (without Dilution with water) @ 1kg/ Sqm by brush as per manufacturers instructions.Stage 6:Providing 15mm thick protective plaster in CM (1:3) mixed with STP No. 1 @ 250ml/50 Kg cement all as per manufacturers instructions.Stage 7: Carryout ponding test for 48 hours to ensure water tightness of repaired sunken portion. NOTES :- (i)Mode of measurement shall be actual area treated (floor and adjoining walls). 105 Demolition of cement concrete (unreinforced) in roof (tiling), tarfelt, stair case landing, floors (other than ground floor) including removal of rubbish out of MOD land complete all as specified and directed. 106 M&L for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in roof padding to maintain slope etc complete all as specified and as directed. 107 M&L for preparationsurface includingcleaning of all dirt andproviding the following water proofing treatment in narrow widthover the roof gutter of stores housesor chajjah/canopy/parapet wall, below PVC/RCC water tanks etc of G+3 storied buildingaccessible / non accessibleRCCroof to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and as directed by Engineer-in-Charge:-(a) Cleaning of all foreign material such as fungus,mass, dust etc by brushing and dusting, sprinkle water on surface, surface shall be levelled with a layer of 20 mm thick CM (1:4) mixed with water proofing admixtureWPC @3% by weight ofas per manufacturers insturctions.(b) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface.(c) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm.(d) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consistingof a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc.(e) Membrane bonded completely to the substrate & the over laps are then sealed/fused by flame and including two coats of water proofing bituminous aluminum paint on top of APP membrane complete all as specified and as directed. 108 M&L for cement concrete tiles 20cm x 20cm x 20mm thick machine pressed, set & pointed in neat cement slurry in floor with grey cement and no pigment and cut and polished on roofover and including 15 mm thick screed bed in CM (1:4) including material and labour for necessary scaffolding, safety arrangement and formwork upto G+3 storeys complete all as specified and as directed. 109 S&F in repairsvitreous china squatting pan, Orissapattern, size (580 X 440)mm white with integral foot rests, including connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint and to socket or stopper, including flush pipe all fittings etc complete all as specified and directed. 110 S&F in repairs Vitreous china wash down water closet pan “Pedestal Pattern” colouredwith WCseat cover coloured, closed pattern with flat bottom and mild steel chromium plated or aluminized hingingdevice including PVC flush pipe and joints etc and connection to drain, flushing, pipe, anti-syphonagepipe, and fixing arrangements with fixing bolts etc complete all as specified and directed. 111 S&F in repairs low level flushing cistern 10 ltrs capacity, and connections to pipes and fixing of chain and pull, or lever, if any PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, including brackets complete all as specified and directed. 112 M&L in repairs for cast iron Nahani trap/floor trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete all as specified and directed. 113 S&F in repair CP Soap dish complete all as specified and as directed. Make-AKP-35731P of Jaquar or equvelent in kohler. 114 S F in repair corner glass shelf with bracket complete all as specified and as directed. Make:- ACN-1173 of Jaquar or equvelent in kohler. 115 Takingupor down15 mm steeltubing and connections including cleaning for refixingor removal to store complete all as specified and as directed. 116 Takingupor down20mm steeltubing and connections includingcleaning for refixing or removal to store complete all as specified and as directed. 117 Material and Labour for 15mm bore, medium grade, GI tubingwith all fitting and fixed complete to walls and ceilings or laid in floors and cutting chase, pinning in making good to facings where required in pointing in cement mortar (1:3) for concealed water tubingcomplete all as specified and as directed. 118 Material and Labour for 20mm bore, medium grade, GI tubingwith all fitting and fixed complete to walls and ceilings or laid in floors and cutting chase, pinning in making good to facings where required in pointing in cement mortar (1:3) for concealed water tubingcomplete all as specified and as directed. 119 Refixing old 15 mm bore GI steel tubing and connectionsin new or old position (walls, ceiling, floors, etc), includingnecessary new fittings complete all as specified and as directed. Note:- Old serviceable GI pipe shall be retrieved from Ser item No. 115 here in before. 120 Refixing old 20 mm bore GI steel tubing and connectionsin new or old position (walls, ceiling, floors, etc), includingnecessary new fittings complete all as specified and as directed. Note:- Old serviceable GI pipe shall be retrieved from Ser item No. 116 here in before. 121 S&F in repairfor15 mm diastopvalvecast copperalloy screweddownhigh pressurewithcrutch orbutterfly handle fancy type screwedbothsidefor ironpipeoefor union complete all as specified and as directed. 122 S&F in repair pillar taps fancy type 15mm dia bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. 123 S&F in repair chromium plated long bodybib taps fancy time of 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. 124 S&F in repairof sink made out of stainless steel 1mm thick, drainage board kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size (915X460)mm bowl size (410X330X160) mm complete all as specified and as directed . 125 S&F in repairs, health faucet with double lock, one meter long brass chromium plated steel flexible hose pipe and wall hook complete all as specified and directed . 126 S&F in repairs 15 mm angle valve chromium plated with wall flangeand fancy typewithhigh pressure screwed down and with CP flange of same make complete all as specified and as directed. 127 S&F in repairs, PVC connections 15mm size with PTMT nuts of length 450mm and fixed complete all as specified and as directed. 128 Dismantling water tank of capacity exc. 250 ltr and n. exc. 500 ltr and removing to store complete all as specified and as directed. 129 S&F 500 ltr cap rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed. 130 Dismantling water tank of capacity exc. 500 ltr and n. exc. 1000 ltr and removing to store complete all as specified and as directed. 131 S&F 1000 ltr cap rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed. 132 S&F ball valve 15mmhigh pressure of PTMTwith epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed. (minimum weight-142 gms) 133 S&Fball valve 20mmhigh pressure of PTMTwith epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed. (minimum weight-210 gms) 134 S&F in repairs (600 x450) mm fancy typeor bevelled edge mirror of selected quality glass, mounted on 6mm thick PVCbuilding board and fixed with PVC beadings with chromium plated brass screws and cup washers complete all as specified and as directed. 135 S&F in repairs, wash hand basins vitreous china flat back 450mmx300mm size white, first quality, with and including chromium platedwaste grating 32mm size, PVC waste pipe 25mm bore heavy duty China and plug and porcelain stopper, brackets of Mild Steelangle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets complete all as specified and as directed. 136 Taking down AC/PVC any type pipes of 75/100/110 mm diaof any description including all fittings complete all as specified and as directed. 137 S&F 75mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls with cement joints fixed to wall including suitable clamps after every one mtr of interval complete all as specified and as directed. 138 S&F 100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls with cement joints fixed to wall including suitable clamps after every one mtr of interval complete all as specified and as directed. 139 S&F CI 100mm bends with door complete all as specified and as directed. 140 S&F CI 100mm single branch piece with door complete all as specified and as directed. 141 S&F CI 75mm single branch piece with door complete all as specified and as directed. 142 S&F75mm double branch piece with door complete all as specified and as directed. 143 S&F cast iron cowls 100 mm size complete all as specified and as directed. 144 S&F Cast Iron `P Trap 100mm bore complete all as specified and as directed. 145 S&F in repairs cast iron floor trap with CP grating including jointing to wastepipe withrun lead, dia of outlet pipe 100mm set in cement concrete type B1 (1:2:4) complete all as specified and as directed. 146 S&F in repairs brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. 147 Welding work upto 4th floor in repairs in any position or any thickness of metal and including cleaning and preparing the surfaces to be welded together and additional piece of metal, if required, holding the members in true position, welding and bevellign of edges as required also including taking down the article and refixing in same position after welding and grinding upto true level complete all as specified and as directed. 148 S&F 2nd class softwood plain fillets sectional area exc 13 sq cm and n. exc 25 sq cm square, rectangular or triangular in section, clean sawn, secured with nails or beads complete all as specified and as directed.
Contract Date: Oct 16, 2025 Contract Value : ₹ 17.14 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Delhi View Result →
42.
Defence #8092453 AOC
Tender For Spl Repairs To Improvement Of Water Supply Distribution System & Connected Works And Provn Of Flooring With Tiles In Bldg No T-7, Aps Foundation Wing Under Ge Gwalior; 1 M&L for Construction of header made out of MS pipe of 200 mm dia (thickness of MS pipe not less than 12mm), 2.0 mtr length (in two piece of each 1.00 meter length and providing holes for fixing/welding MS pipe pieces with one flange end for fixing of 02 Nos sluice valve of size 150 mm, 02 Nos 80 mm dia. MS pipe should be fixed on PCC foundation and top with PCC 1:3:6 type C1 (using 20mm graded trap stone aggregate) (30cm in foundation on top) & anchoring with MS strip at 3 place (MS strip should be grouted in PCC as suitable) and masonary block constructed with 230 mm thick brickss sub class B bricks builts in cement mortar 1:4 and 15mm thick plastering to brick, masonary in cement mortar 1:4, including Excavation and earth work complete all as specified and directed.Note:-(i) Quoted rates are also included to fixing/welding of MS pipe cut pieces as required size/type/length on site each for all 04 Nos inlet/outlet water supply pipeline connected & all type PCC foundation & brick work complete (ii) All T&P material will be provided by the contractor without any cost. (iii) MS fitting like Flange, Dead plate, bleds reducer etc and sluice/butterfly valve should be measured and paid separatly under appropiate item of BOQ. 2 Supply & fix cast iron sluice valve PN-1.6 confirming to IS 14846/2000, ISI mark with MS sprindle and iron wheel head with both end flanged with new rubber gasket, bolts, and nuts fixed at any location of size 150 mm dia complete all as specified and directed. 3 Supply & fix cast iron sluice valve PN-1.6 confirming to IS 14846/2000, ISI mark with MS sprindle and iron wheel head with both end flanged with new rubber gasket, bolts and nuts fixed at any location of size 80 mm dia complete all as specified and directed. 4 Supply & fix for CI non return valve (NRV) confirming to IS 5312, ISI marked with GM flap of size 150 mm and connected with necessarybolts, nuts & washer, Gaskets etc complete all as specified and directed. 5 Supply and fix and welding MS flange of 150 mm dia & 12 mm thick and providing holes for fixing of nuts bolts of suitable size complete all as specified and directed. 6 Supply and fix and welding MS flange of 80 mm dia & 8 mm thick and providing holes for fixing of nuts bolts of suitable size complete all as specified and directed. 7 Supply and fix MS dead plate of size 200 mm dia & 12 mm thick and providing holes for fixing of nuts, bolts of suitable size complete all as specified and directed. 8 Supply and fix MS Bend of size 150 mm dia & 6mm thickcomplete all specified and directed. 9 Supply and fix MS Bend of size 80 mm dia & 6mm thickcomplete all specified and directed. 10 Taking up Cast iron water main (including all fittings) with spigot and socketed ends and lead joints including burning out lead joints for pipe of bore 150 mm complete all as specified and directed. 11 Supply, laying, connecting, jointing and testing ductile iron pressure pipe ISI maked to IS-8329-2000 (Reaffirmed - 2005 Edition 4.1) of 150 mm dia, with spigot and socket ends, for water supply class K-9 with cement mortar lining inside the metallic zinc coating with finishing layer of bituminous paint on outside the pipe without polyethylene sleeves but including Tyton Joint supplied with ISI marked rubber or fiber board gasket conforming to IS-5382-1982 (Reaffimed-2003) with dual hardness of type-2 (bulb) and type-5 (Heel) quality laid in trenches complete all as specified and directed.Note:- Earth work and DI specified / fittings of the pipe shall be measured and paid separately under appropriate item of BOQ. 12 M&L for DI fittings such as bends (any type, radius and angle) Tapers any type (Straight bends, increasing, decreasing or double socket/flanged etc) Tee pieces, single branch Y junction, double branch, cross (all sockets or sockets & spigot/ all flanged etc) collars, Caps & plugs for spigot socketed/Flanged pipes upto 200 mm dia bore complete all as specified and directed. 13 M&L for jointing of ductileiron pipe and pipe fittings any class with rubber gasketjointforspigot andsocket end pipe of 150 mm dia complete all as specified and directed. 14 Excavating in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out for laying of pipe etc in soft/loose soil complete all as specified and directed. 15 Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed. 16 Removing excavated surplus in soft/loose soil to a distance not exceeding 50M and depositing where directed and at a level not exceeding 1.5M above the starting point complete all as specified and directed. 17 Material & Labour for cutting of Roads/PCC/RCC floors and filling of PCC 1: 2: 4type B2 (using 40mm graded crushed trap stone aggregate) for making good road cutting complete all as specified and directed. Note :- Excavation and removal should be measured and paid separately under appropriated items of BOQ. 18 Supply and fix Cast Iron Air Valves with two air Outlets, conforming to IS 14845 of size 50 mm dia bore and fixing up in Cast Iron Water supply mains of size 50 mm dia complete all as specified and directed. 19 Taking out old unserviceable pipe line alongwith fittings from existing connections of size 80 mm dia complete all as specified and directed. 20 Same as per item No. 19 above but of size 50mm dia. 21 Same as per item No. 19 above but of size 40 mm dia. 22 Same as per item No. 19 above but of size 25 mm dia. 23 Same as per item No. 19 above but of size 20 mm dia. 24 Supply & Laying in trenches galvanised steel water tubing ofmedium grade with all fittings such as bends, elbows, tees, unions, nipples, short pieces etc as required at site of size 80 mm dia complete all as specified and directed. Note :- (i) Excavation and earth work shall be measured and paid seperately under relevant item of BOQ(ii) The rates quoted inclusive of cutting, jointing and testing of the pipe. 25 Same as per item No. 24 above but of size 50mm dia. 26 Same as per item No. 24 above but of size 40 mm dia. 27 S&F in renewal of 50 mm dia gun metal gate valves with iron wheel head screwed at both ends for iron pipes complete fixed at any locationcomplete all as specified and directed. 28 Same as per item No. 27 above but of size 40 mm dia. 29 Same as per item No. 27 above but of size 25 mm dia. 30 Same as per item No. 27 above but of size 20 mm dia. 31 Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of upto200 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed. 32 Supply & Fixing galvanised steel water tubing 25mm dia of medium grade with all fittings such as bends, elbows, tees, unions, nipples, short pieces etc and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.Note:- (i) The rates quoted inclusive of cutting, jointing and testing of the pipe. 33 Same as per item No. 32 above but of size 20 mm dia. 34 M&L for Construction of valve chambers of size 1.5x1.5 x1.2m in internal dimentions with 150 mm thick foundation of PCC 1:4:8 type D2 (using 40 mm graded trap stone aggregate) 230 mm thick brick masonary wall with sub class B bricks builts in CM 1:4 & 10 mm thick plastering with cement mortar 1:4 to brick masonary internally and externally upto 15 cm below ground level, 50 mm thick coping with PCC 1:2:4 type B1 (using 20 mm graded crushed trap stone aggregate), valve chamber having coller frame of size 1.5x1.5 x1.2mmade of mild steel angles of size 50mm x 50mm x 6mm and cover made of 2.5 mm thick mild steel sheet framed by 40x40x5 mm MS angle having 02 Nos of cross X supprt fixed with coller frame by mild steel hinges - 02 Nos of suitable size, locking arrangements with provision of locks and painting the steel surfaces with two coats of alluminium enameled paint over a coat of zinc chromate primer including neccessary earth work, excavation, complete all as specified and directed. 35 Dismantiling of stone slabs and tiles (Kota stone etc) of any description or any thickness in floors, aprons, skirting, dado etc laid bedded and pointed in any mortar complete all as specified and directed. 36 M&L for PCC (1:4:8) Type D2 (using 40 mm graded stone aggregate) as in foundations filling mass concrete complete all as specified and directed. 37 M&L for non skid ceramic colour tiles7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set over 15 mm thick cement screed bed in CM (1:6) set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. 38 M&L for non skid ceramic colour tiles7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set over 15 mm thick cement screed bed in CM (1:4) set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.
Contract Date: Oct 11, 2025 Contract Value : ₹ 48.92 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 9
Madhya Pradesh View Result →
43.
Defence #7884620 AOC
Tender For Special Rep To Bldg No P-08 (Single Jcos Living) Of Certain Unit In Northern Sector At Mil Stn Kota; 1 Taking down cement plaster on stone/brick/concrete surfaces including racking out joint, hacking for key, scrubbing down with water complete all as specified and as directed. 2 Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and as directed. 3 Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed. 4 Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each complete all as specified and as directed. 5 Taking down existing treatment of any description such as PCC padding, lime concrete, mud phuska etc. and any numbers of layers upto any thickness from roof including scraping and roughening old by picking, sweeping clean and washing down and removing debris outside MD land complete all as specified and as directed. 6 M & L for cement concrete M15 (Nominal Mix) using 12.5 mm nominal size coarse aggregate in roof kerbs or mud stops,padding, rounded or chamfered on edges complete all as specified and as directed. 7 M & L for brushing neat cement slurry with 3.0 kg of cement per square meter complete all as specified and as directed. 8 Material & labour for rendering 15 mm thick in cement mortar 1:4 over RCC Roof mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction complete all as specified and as directed. (Note;- water proofing compound shall be measured and paid separately as supply only) 9 Supply only liquid water proofing compoundcomplete all as specified and as directed. 10 M&L for cleaning of roof slab including picking, sweeping clean and washing down with water to remove dust, dirt etc and Supply and fix APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.0 Kg/Sqm, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over cold applied bituminous primer conforming to IS 3384 @ of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions, complete all as specified and directed. Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 30/40 confirming to IS-73, [email protected] Kg/Sqm over a coat of cold applied bituminous primer conforming to IS:3384 @ 0.40 Kg/Sqm.(ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii)The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv)In case of stone masonry parapet wall etc a groove of size 25mmx25mm (minimum) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimney/other vertical surfaces and polymeric membrane inserted in groove and sealed with paving bitumen. (v) Cost of above aspects is deemed to be included in quoted rates.(vi) One coat of aluminium reflective paint should be applied on APP after sealing the joints of APP. 11 M & L for brick work with fly ash bricks of class designation 7.5 and non-modular size as per IS 12894: 2002, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed. 12 Material and labour for plastering 15 mm thick on other than fair faces of brick wall or stone surfaces in cement mortar 1:4 with integral water proofing compound finished even and fair complete all as specified and as directed. Note: Water proofing compound shall be measured and paid for separately. 13 M&L for cleaning of walls and floor of sunken portions including picking, sweeping clean and washing down with water to remove dust, dirt etc and Supply and fix APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.0 Kg/Sqm, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over cold applied bituminous primer conforming to IS:3384 @ 0.40 Kg/Sqm, torching overlaps with a propane or a butane gas torch with an overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold applied bituminous primer all as per manufacturer’s instructions, complete all as directed. Note: (i) The waterproofing treatment shall be got carried out through the manufacturer or their authorized applicators only. (ii) HDPE spout pipe 32mm bore of required length shall be provided and rates for same shall be included in above quoted rate. 14 Material and labour for plastering 15 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. 15 Material and labour for plastering 15 mm thick on stone masonry surfaces or other than fair faces of brick work or on one side of lathing (on vertical surfaces) in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. 16 Material and labour for plastering 20 mm thick on stone masonry surfaces or other than fair faces of brick work or on one side of lathing (on vertical surfaces) in cement mortar 1:4 finished even and smooth without using extra cement mixed with and including water proofing compound as per manufacturer instructions complete all as specified and as directed. 17 Material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished even and fair complete all as specified and as directed. 18 M & L for preparing plaster surfaces of walls treated with 1mm thick putty and applying acrylic distemper in two or more coats, VOC less than 50 gms/ litre as per IS 101 (Part 2/Sec 2), matt finish, medium washability, of approved shade, over a coat of primer as per the manufacturer’s instructions, applying using brush, keeping the gap/ the interval in subsequent coats, including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.Note: - The paint shall be as per Tractor Uno Acrylic Distemper of Asian Paints or equivalent of Make mentioned under Appendix B. 19 Complete removal of existing treatment and preparing plaster surfaces of walls treated with 1mm thick putty and applying acrylic distemper in two or more coats, VOC less than 50 gms/ litre as per IS 101 (Part 2/Sec 2), matt finish, medium washability, of approved shade, over a coat of primer as per the manufacturer’s instructions, applying using brush, keeping the gap/ the interval in subsequent coats, including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. Note: - The paint shall be as per Tractor Uno Acrylic Distemper of Asian Paints or equivalent of Make mentioned under Appendix B. 20 M & Lfor preparation of newly plastered surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and directed. 21 Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces complete all as specified and directed. Note :- Premium acrylic emulsion pain should be done as per following processer :-(i) complete removal of existing treatmentforpreparation of old decorated treatment on wall / ceiling / chajja by scrapping with trucare wall sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7/9 to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etccomplete (ii) After that and applying one coats ofAnti fungal weather proof grade exterior acrylic emulsion paint of approved tint over a coat of approved primer as per manufacturers instractions weather proof primer with crack filling upto 5 bars of positive hydrostatic pressure on vertical walls without any dilution with forced coverage not more than 3.5 sqm / ltr as per manufacturers instructions and all coats including primer to be applied with fully automatic airless spray machineof paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI or manual application. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed.(iii) MAKE :- dulux weather shield max/Nerolac Excel Everlast 12/Asian paint ultima protek / Berger weather coat long life 10 orTechno commercially equivalent makes specified in PS. 22 Preparation of newly plastered surfaces on ceilings and applying three coats of white wash complete all as specified and as directed. 23 M&L for preparing old surface of ceiling, plastered or unplastered by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts andtreatingoil and greasy spots & applying one coat of white wash etc complete all as specified & as directed. 24 S & F hot rolled medium and high tensile structural steel of grade E165 as per IS 15911: 2010 as in framed work such as grills, grating, etc., with ends of bars of shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework water tanks and similar work complete all as specified and as directed. 25 S & F hot rolled medium and high tensile structural steel of grade E 250 quality C conforming to IS 2062: 2011 as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. 26 Dismantling of wrought or mild steel work of any description not otherwise described into primary parts complete all as specified and directed. 27 S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge and as per specification & drawing as applicable to item 08100A given in SSR Part – II (2020). (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make:-Rajshri/Sintex/Accucel/Duraplast 28 S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge and as per specification & drawing as applicable to item 08100A given in SSR Part – II (2020). (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make:-Rajshri/Sintex/Accucel/Duraplast 29 S&F for factory made 30mm thick 100% Solid WPC ( Wood polymer Composite) Laminated Flush Door Shutter of required size comprising ofvirgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, (maximum toxicity index of 12 for 100 grm ) made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm, having good screw holding capacity ( Screw Withdrawal strength of 1800 N ( Face ) & 900 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pastedon both faces of shutterand fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company :For WC/Bathroom/Toilet/Kitchen/Balcony Doors. Make:-Rajshri/Sintex/Accucel/Duraplast 30 S&F for factory made 35mm thick 100% Solid WPC ( Wood polymer Composite) Laminated Flush Door Shutter of required size comprising ofvirgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, (maximum toxicity index of 12 for 100 grm ) made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm, having good screw holding capacity ( Screw Withdrawal strength of 1800 N ( Face ) & 900 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pastedon both faces of shutterand fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company :For WC/Bathroom/Toilet/Kitchen/Balcony Doors. Make:-Rajshri/Sintex/Accucel/Duraplast 31 S&F for factory made 35mm thick 100% Solid WPC ( Wood polymer Composite) Laminated gauged type door Shutter of required size comprising ofvirgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pastedon both faces of shutterand fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company :For WC/Bathroom/Toilet/Kitchen/Balcony Doors. Make:-Rajshri/Sintex/Accucel/Duraplast 32 S&Fwindows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM) and Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52x 25mm. Outer frame & mullion sections to have rebate for glazed shutters. Fly mesh with 20 mm GI flat beading for provision of guard bars/ grills. Fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stainless steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter with 0.36mm dia of wire and 1.40mm aperture. Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 12mm square guard bars with 110mm spacing c/c (Horizontal bay) to be welded on FI 20x6mm alaround except runner portion complete all as specified and directed. 33 S&Fventilator with top wire mesh shutter and bottom fixed frosted glass made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM) and Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52x 25mm. Outer frame & mullion sections to have rebate for glazed shutters. Fly mesh with 20 mm GI flat beading for provision of guard bars/ grills. Fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stainless steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter with 0.36mm dia of wire and 1.40mm aperture. Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 12mm square guard bars with 110mm spacing c/c (Horizontal bay) to be welded on FI 20x6mm alaround except runner portion complete all as specified and directed. 34 S&F 17-19 mm thick modular membrane kitchen cabinet door shutters and shelves (made out of HDHMR boards) in wood grain colour and half round edges, complete all as specified and directed. 35 S&F 16-18 mm wide & 1mm thick PVC edge banding pasted to edges of PVC furniture with suitable adhesive, complete all as directed. 36 S & F auto close hinges three dimentional adjustment with suitable mounting plate of extruded brass with nickel plated for corrosion resistance, bright finished for cubboard and cabinet shutters complete all as specified and directed. 37 S & F brass alloy handle, fabricated type, 100 mm size, nickel chromium plated finish as per service grade number 2 of IS 1068: 1993 complete all as specified and as directed. 38 S & F 100 mm size medium weight stainless steel butt hinges made out of cold rolled complete all as specified and as directed. 39 S & F stainless steel handle cast moulded type anodised 150 mm size fixed with screws complete all as specified and as directed. 40 S & F stainless steel barrel tower bolts of extruded section 200mm long complete all as specified and as directed. 41 S & F mild steel door spring of rat tail type of size 300 mm, bright finish including roller and roller plate complete all as specified and as directed. 42 S & F aluminium alloy sliding door bolts with hasp, staple and fixing clips of sheets, or extruded sections and fixing bolts and sliding bolts of extruded sections of aluminium alloy, 250 mm long, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed. 43 S & F in renewal floor door stoppers made out of aluminium alloy pressure die casting body and tongue with hard drawn steel wire spring, overall length of cover plate 140 mm, 4.5 mm thickness of cover plate, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996, suitable for 30 & 35 mm thickness of door shutter, fixed in floor complete all as specified and as directed. 44 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 45 Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc.complete all as specified and as directed. 46 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. 47 Demolition of cement concrete(unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. 48 M&L Glazed ceramic coloured tiles on vertical surfaces 350x 250x7 mm/450X300X7mm/ 300X600X7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10 mm thick rendering in CM 1:4 backing, complete all as specified and directed. Make :- Kajaria (Impression)/Johnsons (Elite Plus)/ Somany (Juene Glossy). 49 M & L for cement concrete M15 (Nominal Mix) using 12.5 mm nominal size graded crushed stone aggregate, 25 mm thick in sub base for laying tiles, pavings, floorings etc. complete all as specified and as directed. 50 M&L for joint free non skidceramic coloured tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6,complete all as specified and directed. Make :- Kajaria Pavigres matt finish/Johnsons Elite plus Matt Finish/ Somany Plain star Beige Matt Finish. 51 M&L for joint free non skid matt finishceramic coloured tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6,complete all as specified and directed. Make :- Kajaria (Matt finish)/Johnsons (Matt finish)/ Somany (Matt finish). 52 M&L for joint free non skid matte finishceramic coloured tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm fixed on vertical surfaces as skirting, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 10 mm thick rendering in CM 1:4 backing, complete all as specified and directed. Make :- Kajaria (Matt finish)/Johnsons (Matt finish)/ Somany (Matt finish). 53 M & L for green marble work 16 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including laying over 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed. 54 M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. 55 M & L for 75 mm thick plain cement concrete M10(Nominal Mix) using 40 mm nominal size graded stone aggregates, laid in alternate panel, finished surface even and fair including filling in position with 85/25 industrial grade bitumen mix filler of proportion 80 kg of hot bitumen, 1 kg of cement and 0.25 cubic metre of coarse sand as in plinth protection complete all as specified and as directed. 56 Taking up or down 15 mm bore of steel tubing and connections, including cleaning for refixing or removal to store or taken on schedule of credit complete all as specified and as directed. 57 Taking up or down 20 mm bore of steel tubing and connections, including cleaning for refixing or removal to store or taken on schedule of credit complete all as specified and as directed. 58 Dismantling water tanks capacity exceeding 250 litres but not exceeding 500 Litres and removing to store complete all as specified and as directed. 59 Supplying & fixing to walls and ceilings or laid in floors 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed. 60 Supplying & fixing to walls and ceilings or laid in floors 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed. 61 S & F rotational moulded polyethylene tripple layer water tanks, white colour (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes complete all as specified and as directed. 62 S & F ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm size, minimum weight 210 grams complete all as specified and as directed. 63 S & F in repairs 600 mm X 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. 64 S & F in repairs wash basins, vitreous china, white, flat back, size 550 mm X 400 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed. 65 S & F in repairs vitreous china wash down water closet (pedestal pattern), white including thermoplastic seats and covers of grade 2 type, flat with hinging device of bronze or brass with nickel chromium plating, fixing bolt, connector to flush pipe and making connections to flush pipe, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed. 66 S & F in repairs 10 litres capacity, low level, syphonic type, white, plastic flushing cistern as per IS 7231: 1994 with inlet, ball valve, float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe complete all as specified and as directed. 67 S & F in renewal flushing jet CP for pedestal pattern WC including flexible pipe and brass chromium plated nuts and bolts and water pipe of size 1150 mm long complete all as specified and directed 68 S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. 69 S & F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and as directed. 70 S & F in repair towel ring of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (Minimum weight of 90 Gms) complete all as specified and as directed. 71 S & F in repairs 20 mm nominal size, screw down stop valves, cast copper alloy body and body components with crutch handle, bright finished complete all as specified and as directed. 72 S & F in repairs 15 mm nominal size, screw down stop valves, cast copper alloy body and body components with crutch handle, bright finished complete all as specified and as directed. 73 S & F in renewal of 15 mm wall mixture three in one with complete accessories complete all as specified and directed.Make :- CERA cat part No F1001411/ Jaquar cat part No QQP 7273PM/ Hindware cat part No F 740022 ortechno commercially equivalent make specified in PS. 74 S & F in renewal of Bib taps 15mm dia,chromium plated, long body,with CP flange all as perfixed in repairs complete all as specified and as directed. Make :- CERA cat part No G 1017152 /Jaquar cat pat no VGP-81037/ Hindware cat part No F 740011or techno commercially equivalent makes specified in PS. 75 S & F in repairs 15 mm nominal size, nonrising spindle type fancy pillar taps as per IS 8931: 1993, cast copper alloy body with knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed. 76 S & F in repairs 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings with including silicone sealant complete all as specified and as directed. 77 S & F stainless steel soap dish weight not less than 150 gm each fixed to plugs with chromium plated brass screws complete all as specified and as directed. 78 S & F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. 79 S & F in repairs grating round 140 mm size of PTMT (Minimum weight) complete all as specified and as directed. 80 M & L in repairs for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. 81 S & F in repairs stainless steel curtain rod made out of stainless steel sheet of grade X 02Cr19Ni1O (304 S2), surface finish No. 4 as per IS 6911: 2017, 25 mm dia including brackets and holders etc. complete all as specified and as directed. 82 Dismantling of cast iron or reinforced concrete drain pipes of size 75mm /100 mm jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed. 83 S & F cast iron, centrifugally cast, socket and spigot, nominal dia 100 mm soil, waste and vent pipe as per IS 3989: 2009 in any length with cement joints, laid in trenches or in floors complete all as specified and as directed. 84 S & F cast iron, centrifugally cast, socket and spigot, nominal dia 75 mm soil, waste and vent pipe as per IS 3989: 2009 in any length with cement joints, laid in trenches or in floors complete all as specified and as directed. 85 S & cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) without access door for soil, waste and vent pipes of nominal size 100 complete all as specified and as directed. 86 S & F cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) without access door for soil, waste and vent pipes of nominal size 75 complete all as specified and as directed. 87 S & F cast iron, centrifugally cast, socket and spigot, nominal dia 75 mm soil, waste and vent pipe as per IS 3989: 2009 in any length with cement joints, fixed to walls incl necessary clamps, nuts, bolts etc. and making good the disturbed surface as per existing complete all as specified and as directed. 88 M & L for cast iron floor trap 75 mm nominal diameter with grating including jointing to waste pipe with lead joints and including necessary concreting in M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed. 89 S & F cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches without access door for soil, waste and vent pipes of nominal size 100 mm complete all as specified and as directed. 90 S & F cast iron vent cowl for 100 mm bore pipe complete all as specified and as directed. 91 M & L for glazed stoneware square mouth gully trap, P type, size 150 X 150 including setting and jointing to drain with cement mortar 1:1 complete all as specified and as directed. 92 Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position, above or below ground floors, not otherwise specifically provided for complete all as specified and as directed. 93 M & L for RCC M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate as in chajjas complete all as specified and as directed. 94 M & L for RCC M20 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. 95 M & L for RCC M20 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed. 96 M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height. Complete all as specified and as directed. 97 M & L for mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height. Complete all as specified and as directed. 98 M & L for formwork to chullah hoods, chajjas, troughs and similar items including edges for fair finished flat surfaces of concrete complete all as specified and as directed. 99 M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished flat surfaces of concrete complete all as specified and as directed. 100 M & L for 16-18 mm thick granite of black colour (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over and including 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. Note- The quoted rates shall be inclusive of - (i) Moulding of front and side of slab including polishing. (ii) Granite shall be laid in single piece of any size with rounding of edge and a groove shall be provided beneath the projection portion of slab. (iii) Gas pipe hole should be provided in kitchen slab. 101 M & L for providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion in water of one percent Chlorpyrifos 20 EC at the rate of 7.5 litres per sqm of the vertical surface of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc. complete all as specified and as directed. 102 S & f in renewal sign board with stainless steel frame of any size with 3mm thick ACP sheet one side visibility with digital art work ( letter, numbers, signs, symbols, etc. ) retro reflective Type IV high intensity prismatic grade sheeting in twin colours conforming to IRC 67- 2022, digitally colour printed as directed to be fixed on stainless steel frame. The frame shall be fixed in PCC 1:2:4 type B1 incl necessary excavation and earthwork complete all as specified and directed. NOTE- (i) Writing letters, numbers, signs, symbols, etc shall be deemed to be included in quoted rates. (ii) SS frame shall be measured and paid separately under appropriate item . 103 Material & Labour for providing and fixing stainless steel (grade X 02Cr19Ni1O, 304 S2, surface finish No. 4 as per IS 6911: 2017) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. 104 S&F snake guard (door seal Aluminium plate with rubber beading) for door of approved size and shape etc complete all as specified and directed . 105 Dismantling posts or struts (wood, steel or RCC.) any section embedded in concrete, brick work, masonry, etc., including taking out embedded portion and making good disturbed ground complete all as specified and directed. 106 Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and as directed. 107 Dismantling fencing wire mesh, any type complete all as specified and as directed 108 M & L for cement concrete in foundation, filling and mass concrete in M10(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed. 109 S & F hot rolled low tensile structural steel of grade E165 as per IS 15911: 2010 as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar works complete all as specified and as directed. 110 Supply only 10 mm dia mild steel Gde E-250 plain round bars as in line wire for chain link fencing complete all as specified and as directed. 111 Supply only galvanized steel chain link fence fabric of any mesh size, made out of any nominal dia mesh wire, heavy zinc coating type conforming to IS 2721: 2003 complete all as specified and as directed. 112 Fixing only galvanized steel chain link fence fencing including line wires any mesh, size and type to any type of standards, rails, straining bolts, etc. including provn of binding wire complete all as specified and as directed. 113 S & F mild steel screw bolts (machine made), diameter of neck 11 to 15 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5 cm long complete all as specified and as directed. 114 Preparation of newly or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. 115 Preparation of newly or previously untreated steel surface of any description not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. 116 M & L for cement concrete M7.5 (Nominal Mix) using 40 mm nominal size graded crushed stone aggregate 100 mm thick in sub base for laying tiles, pavings, floorings etc. complete all as specified and as directed. 117 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M35 grade conforming to IS 15658: 2021 made by block making machine with strong vibratory compaction, of approved size, design & shape, cast in rubber mould, glossy finish of approved colour, laid in required colour and pattern over and including 25 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. complete all as specified and as directed. 118 Providing and laying at or near ground level factory made kerb stone of any size, top bullnosed shape, made of M-25 (Design Mix) grade cement concrete, in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. 119 M & L for precast cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) complete with joints to match complete all as specified and as directed. 120 Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) of internal dia 150 mm, set in cement mortar complete all as specified and as directed. 121 M & L for concrete bed to drain pipes of internal diameter 150 mm laid in trenches in cement concrete M7.5(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate including packing under and haunching against the sides of pipes complete all as specified and as directed. 122 Supplying and laying reinforced concrete pipes with collars, 150 mm internal diameter, class NP2, laid and jointed with stiff mixture of cement mortar (1:2) complete all as specified and as directed. 123 Cutting into existing manholes for connecting new drains of pipe of nominal size 150 mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete M15(Nominal mix) using 20 mm nominal size graded crushed stone aggregate, smooth finished, and reforming benching as required complete all as specified and as directed. 124 Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. or for cable laying or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and as directed. 125 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose/ hard/ dense soil complete all as specified and as directed. 126 Removing excavated material (soils) not exceeding 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. 127 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, wall light fittings , tube light fittings, surface light fitting , ceiling light fittings , any types of fittings etc. removing materials to store for keeping in safe custody or for taking on credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. 128 Taking down main switch/MCB/MCCB/MCB DB/ MCCB DB/ sheet metal enclosure by disconnecting the electric supply including MCB/MCCB/Cut out etc. any type and size complete all as specified and as directed. 129 Taking down existing old fluorescent tube light fittings/ bulk head light fittings/ ceiling light fittings/ building light fittings including lamp any capacity, any type complete all as specified and as directed. 130 Taking down old unserviceable submain wiring 1.5 sqmm or 2.5 sqmm or 4 sqmm or 6 sqmm or 10 sqmm aluminium/copper conductors any number including batten/conduit/ casing capping including removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface to match the existing surface complete all as specified and as directed. 131 M & L for point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including heavy mechanical stresses class and -5 temperature class PVC casing/capping of suitable size as required at site including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and including providing concealed MS sheet metal sunken switch /Terminal box 1.2mm thick for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surfaces suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. Note :- Cutting chases and making good to match with the adjoining surface deemed to be included in the unit quoted rate. 132 M & L for point wiring for one 3 pin/ 5 pin 5 Amps socket outlet on the same board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including heavy mechanical stresses class and -5 temperature class PVC casing/capping of suitable size as required at site including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and including providing concealed MS sheet metal sunken switch /Terminal box 1.2mm thick for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surfaces suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. Note :- Cutting chases and making good to match with the adjoining surface deemed to be included in the unit quoted rate. 133 M & L for point wiring for one 3 pin/ 5 pin 5 Amps socket outlet on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including heavy mechanical stresses class and -5 temperature class PVC casing/capping of suitable size as required at site including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and including providing concealed MS sheet metal sunken switch /Terminal box 1.2mm thick for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surfaces suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. Note :- Cutting chases and making good to match with the adjoining surface deemed to be included in the unit quoted rate. 134 M & L for point wiring for one bell/ buzzer point controlled by one push button on the same board with other switches or on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including heavy mechanical stresses class and -5 temperature class PVC casing/capping of suitable size as required at site including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and including providing concealed MS sheet metal sunken switch /Terminal box 1.2mm thick for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surfaces suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. Note :- Cutting chases and making good to match with the adjoining surface deemed to be included in the unit quoted rate. 135 M & L for point wiring for one 3 pin/ 5 pin 15 Amps socket outlet on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 2.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including heavy mechanical stresses class and -5 temperature class PVC casing/capping of suitable size as required at site including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and including providing concealed MS sheet metal sunken switch /Terminal box 1.2mm thick for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surfaces suitable for fixing with 2.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. Note :- Cutting chases and making good to match with the adjoining surface deemed to be included in the unit quoted rate. 136 S & F switch, 6A, single pole, one way, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed. 137 S & F switch socket combination with (3 pin and 3 pin) having two earthing pins, combined socket outlets, 6A & 16A, 240 V, AC, 50 Hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without Shutter, Flush type, Design B and switch, 16 A, single pole, one way, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed. 138 S & F buzzer, din dong, suitable for single phase, AC, 240 volts complete all as specified and as directed. 139 S & F bell push, 6A, single pole, one way, 240 V, AC, 50 Hz, ordinary (IPXO), normal gap construction, unenclosed, flush type, screw type terminals, pattern no. 1, rocker type, design A complete all as specified and as directed. 140 S & F 3 pin socket outlets, 6A, 240 V, AC, 50 Hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without Shutter, Flush type, Design B complete all as specified and as directed. 141 S & F Bayonet plastic lamp holder, 2 A, 250 V, ordinary, backplate, non-switched, unenclosed, without T marking, B22d complete all as specified and as directed. 142 S & F ceiling roses, 6A, 240 V, terminals for the connection of live, neutral and protective earthing conductors, surface type, intended to support mechanical loads by means of flexible cord, having provision for the connection of switch wiring, screw type terminal, made out of Polyamide or hornbean complete all as specified and as directed. 143 Taking down ceiling fan 1200/1400 mm sweep / exhaust fans 300mm/ geyser of capacity upto 50 Ltr including disconnection of electric connection and deposited in E/M store yard complete all as specified and as directed. 144 S & F step type electronic fan regulator, capacitor type, 100 watt, 240 volts, 50 Hz, single phase, flush type on the existing phenolic laminated sheet complete all as specified and as directed. 145 S & F ceiling fan, AC, 50 Hz, single phase, 230 V, 1200 mm sweep, minimum air delivery 210 m³ per minute, minimum service value 6 m³ per minute per watt, 3 Nos metal blades protected with corrosion resistance paints, with brushless DC motor having electronic controllers that use sensors, ISI marked including capacitor to ensure power factor more than 0.9, five star rating as per Bureau of Energy Efficiency including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose of Make- Havells Cat No FHCNF5SWHT48 or Bajaj at No Energos26 251100EE or Orient Cat No FALCON BLDC or techno commercially equivalent makes specified in PS incl writting of MES srl No with black colour paint as provided by AGE E/M complelete all as specified and directed. Note- Fan down rod of suitable size upto 3 meter length shall be included in quoted rate. 146 Supplying, installing, testing & commissioning, Storage Geyser, five star rated, 25 litres Capacity, steel body with stainless steel inner tank material, shock proof, auto cut, on-off indicator, thermoplastic body, corrosion free with safety valve, fusible plug, thermal cut out including fixing by grouting and fastener complete all as specified and as directed. 147 S & F exhaust fan, AC, 50 Hz, single phase, 230 V, 300 mm sweep, 4 pole, heavy duty, metal body, 4 Nos blades, Insulation Class A, ISI marked including capacitor to ensure power factor more than 0.9 including louvers and all fixing accessories including making hole for fixing of exhaust fan of suitable size and making good the disturbed surface as per existing complete all as specified and directed. 148 Supply and fix concealed sub main wiring complete with and including two Nos single core PVC insulated, unsheathed flexible conductor FR-LSH cables 6 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories and fixed on walls and 6 sqmm one No single core copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable for earthing and connected to common earth dolly complete all as specified and as directed. (Note 1- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of conduit shall be measured and paid as one unit length. Note 2- Cost of cutting chase and making good shall be measured and paid separately.) 149 S & F LED tube light with built-in batten nominal power 18 Watt LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen output of minimum 1600, lumen efficacy of minimum 90 lumens per watt, integrated electronic driver (SMP based constant current supply) with output short circuit protection and surge protection upto 4 KV, protection grade IP 20, THD below or less than 33%, CW available CCT of 6000K, power factor of minimum 0.90, polycarbonate housing, life span of minimum 50000 working hours complete all as specified and as directed. 150 S & F LED tube light fitting 2 feet 10 watts including tube with high power LEDs as light source and electronic driver complete all as specified and as directed. 151 S & F LED streetlight/ building security light nominal power 45 Watt, 230 V AC, outdoor type with aluminium pressure die-cast housing, polyester powder coated, IP 65/66 protection complete with in-built integrated electronic LED driver including wiring using three core PVC insulated, PVC sheathed, flexible stranded copper conductor FR-LSH cables suitable for outdoor use, 1.5 sqmm as per IS 694: 2010 complete all as specified and as directed. 152 M & L for bracket made out of GI pipe 40 mm dia medium grade, 1.5 metre long bent to shape with MS flat iron clamps made out of 40 mm X 6 mm thick mild steel nuts, bolts including taking down existing GI bracket complete all as specified and as directed. 153 S & F double door MCB Distribution board of sheet metal enclosure, triple pole and neutral, 4 way with 200 Amps rated bus bar, 415 volt, IP42 protection grade and fixed with MS hold fast and grouted in wall with M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed.Make- Legrand Ekinox3 series/ Schnieder Easy 9 series/ ABB Cat No ISYP021604C0001 or equivalent technocommercially equivalent make as specified in PS. 154 S & F single door MCB Distribution board of sheet metal enclosure, single pole and neutral, 8 way with 200 Amps rated bus bar, 240 volt, IP42 protection grade and fixed with PVC plug and screws and grouted in wall with M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed. Make- Legrand Ekinox3 series/ Schnieder Easy 9 series/ ABB Cat No ISYP011608C0001 or equivalent technocommercially equivalent make as specified in PS. 155 S & F miniature circuit breakers (MCB), two pole with one protected pole (SPN), unenclosed, panel board type, screw type terminals for external copper conductors, C-type instantaneous tripping, rated voltage single phase, rated frequency 50 Hz, Rated current 6 A to 32 A, Rated Short circuit capacity 10 kA, any type of fixation, Protection IP 20 complete all as specified and as directed. 156 S & F miniature circuit breakers (MCB), single pole (SP), unenclosed, panel board type, screw type terminals for external copper conductors, C-type instantaneous tripping, rated voltage single phase, rated frequency 50 Hz, Rated current 6A to 32 A, Rated Short circuit capacity 10 kA, any type of fixation, Protection IP 20 complete all as specified and as directed. 157 S & F miniature circuit breakers (MCB), four pole with three protected pole (TPN), unenclosed, panel board type, screw type terminals for external copper conductors, C-type instantaneous tripping, rated voltage 415 V three phase, rated frequency 50 Hz, Rated current 63 A, Rated Short circuit capacity 10 kA, any type of fixation, Protection IP 20 complete all as specified and as directed. 158 S & F sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with two pin & earth plug and socket complete with MCB SPN 32 Amps 240 volts complete all as specified and as directed. 159 M & L for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 4.0 mm dia galvanised mild steel wire by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 20 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed. 160 Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated cable for working voltages of 1100 V, PVC sheathed, armoured, 3 core with reduced neutral conductors (3½ core), nominal cross sectional area of main conductor 25 sqmm, stranded aluminium conductor, ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc. complete all as specified and as directed. 161 Supply & spreading in trenches dry river sand cushioning to underground cable in trenches including spreading, levelling, hand punning down complete all as specified and as directed. Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly. 162 M & L for laying of bricks locally available sub class B bricks, non-modular sizes as per IS 1077: 1992 for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and as directed. 163 Supplying & laying in trenches 40 mm nominal bore, light grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
Contract Date: Aug 29, 2025 Contract Value : ₹ 34.81 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 7
Rajasthan View Result →
44.
Defence #7710239 AOC
SPECIAL REPAIRS TO BLDG NOP-545AT CDM SECUNDERABAD UNDER GE (NORTH) SECUNDERABAD.; 1 Demolition of cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work otherwise specifically provided for roof treatment complete all as specifiedand directed. 2 M & L for 25 mm thick PCC (1:2:4) Type B0 by using 12.50mm graded stone aggregate as in roof where require over slabs and finishing the exposed surfaces fair even without using extra cement complete all as specified and directed 3 M & L for water proof plastering 10mm thick on fair faces of brick work or concrete or roof terrace surfacesin CM 1:3 with WPC @3% by weight of cement including finishing the surfaces all as specified and directed. 4 Supply only Integral waterproofing compound for waterproof plastering complete all as specifiedand directed. 5 M & L for priming the plastered roof surfaces with bituminous primer @ 0.3 Kg/Sqm and laying the APPmodified water proofing membrane as perIS 16540-2017/ IS 16532-2017mineral finish, 3 mm thick and weighing not less than 3.8 kg/sqmreinforced with non woven polyester /HMHDPE matt black finished over compatible primer/bonding bitumen with 100 mm overlap after necessarypreparation of surface complete as per manufacturer’s instructions with bituminous aluminium paint on top @ 0.1ltr/Sqm.complete all as specified. 6 M & L for water proof plastering 15mm thick on fair faces of brick work or concrete surfaces in wall/chajja or sunken floor in CM 1:3 with WPC @3% by weight of cement including finishing the surfaces even and smooth without using extra cementall as specified and directed. 7 M & L for Rendering 5mm thick on brick work or concrete ceiling surfaces in cement mortar 1:3 including finishing the surfaces all as specified and directed. 8 M & L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 all as specified and directed. 9 Demolotion of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed 10 M & L for brick work with fly ash bricks straight or curved on plan exceeding 6 metre mean radius with old size bricks built in CM 1:6 complete all as specified and as directed. 11 Dismantling of floor, hearth or wall tilesincluding cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, all as specified and directed. 12 S & F Glazed ceramic coloured wall tiles in vertical surface 300mmx600mmx 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10 mmthick rendering in CM 1:3 all as specified and directed. 13 M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) coloured area of Each tile size 400mmx400mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mmthick screed bed in CM 1:4 all as specified and directed. 14 M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile 600mmx600mm, in floors etc. set and jointed in neat cement slurry and pointed incoloured cement to match the tiles over and including 15 mmthick screed bed in CM 1:4 all as specified and directed. 15 S & F Vitrified Ceramic tiles Dark shade 10 mm thick (square/ rectangular) polished, area of Each tiles sizes exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in skirting/daddo etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mmthick rendering in CM 1:3 all as specified and directed. 16 S & F Vitrified Ceramic tiles Dark shade double charged 10 mm thick (square/ rectangular) matt finished, area of Each tilessize not exceeding 0.36Sqmin floors/landings/tread etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mmthick screed bed in CM 1:4 all as specified and directed. 17 S & F Vitrified Ceramic tiles Dark shade 10 mm thick (square/ rectangular) matt finished, area of Each tiles size not exceeding 0.36Sqm, in skirting/daddo/riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mmthick rendering in CM 1:3 all as specified and directed. 18 M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mmthick screed bed in CM 1:4 complete all as specified and directed. 19 M & L for Kota stone slab 20-25mm thick in skirting/dadoand including 10 mmthick rendering in CM 1:3 complete all as specified and as directed 20 Demolition Stone slabs and tiles/granite tiles laid in cement mortar of any description or thickness in floors, aprons etc. 21 M & L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platfoRms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over cement screed 15mm thick incm 1;4 over complete all as specified and directed. 22 Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) n exc 1.5 SqmEach etc including making good of hold fast holes with PCC Type C 1:3:6 complete all as directed. 23 Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n.exc 4Sqm Each etcmaking good of hold fast holes with PCC Type C 1:3:6 complete all as directed. 24 Taking down chowkats or frames with shutters of any description area exc1 Sqm but not exc 2 Sqm and refixing in same opening including easying adjusting and refixing builders hardware as required including renewal of unserviceable screws, welding etc., complete all as specified and directed. 25 S & F 12mm thickness toughened glass factory made frosted with CDM logo embedded as in door /wall partitionincluding providingand fixing oftop & bottom pivot & spring typefixing arrangements& necessary holes & making good & required hinges,SS 304 grade handles,door/floor spring etc and including all necesaary fittings complete all as specified. 26 S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. 27 S & F 450mm long stainless steel handle as in glass doors complete all as specified and directed. 28 S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions.Note: Unit price quoted would be inclusive M&L for necessary scaffolding, ladders etc. inorder to work at higher heights. 29 S & F factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 Sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll foRming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 30 S & F 4 mm thick tinted sheet glass frosted, ordinary quality and glazing with oil putty in square Nexc 0.5 sq. m in Each pane complete all as specified and directed. 31 S & F 5.5 mm thick tinted sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in Each pane complete all as specified and directed. 32 S & FStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and directed. 33 S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being teRmite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable.Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified. 34 S & FProviding and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being teRmite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 35 S & F of 35mm thick IInd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc. divided in to square with plain chamfered or rounded mitred and rebated sash bars, any numbers, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters as per ISI and all as specified in SSR Pt –I and as directed. 36 M & L preparation of surfaces of wood and wood based material description over 10cm in width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. 37 S & F 125 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 complete all as specified and as directed 38 S & F 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed 39 S & F 150mm Extruded aluminium alloy handles, fabricated type, anodised all as specified. 40 M & L for 140 mm long floor doorstopper brass body and tonguewith hard drawn steel spring fixed complete all as directed 41 S & F 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed as specified and directed 42 S & F in repair Aluminium Door closerhydraulically regulated designation No.3,universal type ,suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg. complete all as specified and directed 43 S & F in repair 12 mm thick Ply wood BWR, type BB fixed with screws to walls by inserting rawl plugs in the wall/ column surfaces. 44 M & L for 0.9 mm thick colour/ white laminated sheet fixed to wooden surface with glue complete all as specified and directed. 45 S & F 100mm size hasp and staple, safety type, aluminum anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, 46 S & F40mm dia cupboard knobs fixed with nut screw & washer or brass polished. 47 S & F ball catch spring 8mm dia steel ball and brass body and striking plate including letting in complete 48 S & F in repairs drapery curtain rod of stainless steel 25mm dia complete with stainless steel brackets and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and directed. 49 S & Fin repairShelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, teRmite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including dismantling board complete all as specified and directed. 50 S & F for 300 mm MS ordinary rat tail rod pattern springs and including roller and roller plate complete 51 M & L for M.S Hold fasts of FI 25 x 3 mm complete all as specified and directed. 52 S & F in repair vitreous china counter top WHB white of size 565x415x190mm or required size as approved and complete all as specified and as directed.Make:cat no: FLS-WHT-5601 of Jaquar or equivalent in ROCA/KOHLER 53 S & F in repair vitreous china wash hand basin white of bowl size 550mm x 440mm including waste coupling and PVC waste pipe 32mm dia,pillar tap cast copper alloy with capstan heads chromium plated fancy type for 15 mm bore pipe, including M S brackets complete all as specified and directed. 54 Taking out existing water closet, pedestal pattern and replacing with new EWC (Pedestal Pattern) cascade type withflush tank, seat cover etc white including fixing bolts complete including making good to floor to match with adjoining surfaces.Make:cat no: SLS-WHT-6851S220PP Jaquar or equivalent in ROCA/KOHLERas approved. 55 Taking out existing water closet, pedestal pattern and replacing with new EWC (Pedestal Pattern) cascade type withflush tank, seat cover etc white including fixing bolts complete including making good to floor to match with adjoining surfaces. 56 S & F in repair Vitreous china Urinal, Half stall type, white withwaste pipe and CP brass spreader complete including providing andfixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement;flush pipe, grating and union for discharge pipe including CP Urinal spreader for fixing with 15 mm dia pipe complete all as specified and directed. Make: Cat Part No: URS-WHT-13253N of Jaquar or equivalent in ROCA/KOHLER 57 S&F Urinal partitions with touhhened frosted glass slabs terminating about 40cm above floor line, fixed in repairs complete all as specified and directed. 58 S&F in repair Vitreous china Urinal, Half stall type, white withwaste pipe and CP brass spreader complete including providing andfixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement;flush pipe, grating and union for discharge pipe including CP Urinal spreader for fixing with 15 mm dia pipe complete all as specified and directed. 59 S & F in repair vitreous china urinal partition white of size 310x700 mm. terminating about 40cm above floor line complete all as specified and as directed 60 S & F in repairwall hung fancy type bevelledframeless looking mirror of 5mm thick size1.50mx1.20m/1.8mx1.0m or of suitablesize with quality glass with SS Studsfixed to wallwith chromium plated screws and cup washer all as specified & directed 61 M & L in repair600 X 450 mm bevelled edge mirror of selected quality glass , mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 62 S & F in repairs Stop/angle valves fancy type 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Make : Cat No: FUS-CHR-29053 of Jaquar or equivalent in ROCA/KOHLER . 63 S & F in repairs angle cock quarter turnwith flange chromium plated cast copper alloy screwed down complete all as specified and directed.Make: Johnson Eco Cat part No: T3910C or equivalent in Cera/Parryware/Hindware as approved by GE. 64 S & F in repair CP health faucet with 01 Mtr tube and hook complete all as specified .Make : Cat No: ALD-CHR-573 of Jaquar or equivalent in ROCA/KOHLER . 65 S & F in repairs 15mm size two way bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all asspecified and directed .Make: cat no: FUS CHR 29041of Jaquar or equivalent in ROCA/KOHLERas approved. 66 S&F in repairs Two Way (2 in 1) bib taps with wall flange quarter turn suitable for 15mm bore pipe fancy type brass CP, screwed for iron pipe or brass ferrule complete all as specified and directed.Make: JohnsonVIVA series Cat part No: T4808C or equivalent in Cera/Parryware/Hindware as approved by GE 67 S & F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed 68 S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all asspecified and directed Make: Cat No. FUS-CHR-29021 of Jaquar or equivalent in ROCA/KOHLER as approved. 69 S & F in repairs Pillartap quarter turn suitable for 15mm bore pipe fancy type brass CP screwed for iron pipe or brass ferrulecomplete all as specified and directed.Make: JohnsonVIVA series Cat part No: T4801C or equivalent in Cera/Parryware/Hindware as approved by GE 70 S & F in repairs, wall mixer with provision of over head shower with 115mm long bend pipe on upper side connecting legs and wall flanges complete all as specified and directed.Make :- Cat No FLR-CHR-5273UPR of Jaquar or equivalent in ROCA/KOHLER. 71 S & F in repairs brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges 72 S & F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm embedded in the wall 73 S & F in repairs bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all asspecified and directed Make : Cat No. FUS-CHR-29037 of Jaquar or equivalent in ROCA/KOHLER make as approved 74 S & F in repairs Bib cock long nose quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with screwed for iron pipe or brass ferrulecomplete all as specified and directed. Make: JohnsonVIVA series Cat part No. T4806Cor equivalent in Cera/Parryware/Hindware as approved . 75 S & F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing fixed in repairs complete all as specified and directed 76 S & F in repairs Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms)complete all asspecified and directed 77 S & F PVC (SWR) floor trap 75mm dia, plain withSS grating including jointing with solvent cement complete all as specified. 78 S & F in repairs Grating doom 100mm dia of PTMT/ SS. (Minimum weight 85gms) complete all as specified. 79 S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all asspecified and directed 80 S & F in repairsPVC LDPE waste pipe 32mm dia 1m lengthcomplete all asspecified and directed 81 S & F in repairs Rotational moulded polyethylenewater storage tank 3 layer white colour water tank , non- toxic effect, algae foRmation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI/CPVC fittings, inlet/outlet washout, overflow pieces long nipples, check nuts & washer, 20 mm diaball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and high pressure with crutch or butterfly handle etc complete including dismantling existing water tank complete all as specified and directed. 82 S & F in repairs Rotational moulded polyethylenewater storage tank 3 layer white colour water tank , non- toxic effect, algae foRmation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI/CPVC fittings, inlet/outlet washout, overflow pieces long nipples, check nuts & washer, 20 mm diaball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and high pressure with crutch or butterfly handle etc complete including dismantling existing water tank complete all as specified and directed. 83 S & F 16 mm CPVC pipes SDR 11& Plain CPVC SDR 11fittings in trenches complete all as specified. 84 S & F 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. 85 S & F 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. 86 Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store 87 Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store 88 Taking up or down 25 mm bore steel tubing and connections, including cleaning for refixing or removal to store 89 S & F in repairs PVC (SWR) P trap 110mm dia complete all as specified. 90 S & F in repairs PVC (SWR) door Bend 150mm dia complete all as specified 91 S & F in repairs PVC (SWR) door Bend 110mm dia complete all as specified 92 S & F in repairs PVC (SWR) door Bend 75mm dia complete all as specified 93 S & F in repairs PVC (SWR) single T 75mm dia complete all as specified. 94 S & F in repairs PVC (SWR) single T 110 mm dia complete all as specified 95 S & F in repairs PVC (SWR) pipes 110mm bore double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed 96 S & FPVC (SWR) pipes 110mm bore double socketed, in any length with rubber ring joints, fixedon walls complete all as specified and directed 97 S & F in repairs PVC (SWR) pipes 110mm bore double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed 98 Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed. 99 S & F in repairs PVC (SWR) pipes 75mm bore double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed 100 S & FPVC (SWR) pipes 75mm bore double socketed, in any length with rubber ring joints, fixedon walls complete all as specified and directed 101 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixingor removal to Store (measured overall as fixed along the centre line over fittings and accessories) 102 M & L for preparartion of new wall surfaces & applyingtwo coat of Plastic emulsion over a coat of a primer over 3mm thick wall care putty in two layer complete all as directed. 103 M & L for preparartion of new ceiling surfaces & applying two coats of Plastic emulsion over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed. 104 M & L for preparation of newly plastered external wall & concrete surfaces &applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ XSqm over Two coat of putty 3mm and including priming coat of exterior primer applied @ 0.90 litre/ XSqm over wall/concrete surfaces of any height complete all as directed. 105 M & L for Complete removal of existing treatment of external wall surfaces &applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ XSqm over Two coat of putty 3mm and including priming coat of exterior primer applied @ 0.90 litre/ XSqm over wall/concrete surfaces of any height complete all as directed. 106 M & L Complete removal of existing treatmentof old plastered internal surfaces of wall and applying two coats of Platic emulsion paint over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.. 107 M & L Complete removal of existing treatmentof old plastered ceiling surfaces and applying two coats of Plastic emulsion paint over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.. 108 M & L for Preparing old steel surfaces of any description exc 10cm width or grith and applying one coat of synthetic enamel paintcomplete all as specified and directed. 109 M & L for Preparing old wooden surfaces of any description exc 10cm width or grith and applying one coat of synthetic enamel paintcomplete all as specified and directed. 110 M & L for 3mm thick wallcrack putty on old wall /concrete surfacesall as specified and directed. 111 M & L Precast reinforced cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings for WHB , cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces . 112 S & F for Mild steel TMT bars8mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality. 113 Dismantling of Asbestos cement (corrugated, semi-corrugated, etc. ) sheets in roof coverings . 114 S&F Pre-painted galvatume aluminium zince coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified 115 Dismantling of fillets, rails, posts, rafters, purlins, etc. under 40 sq.cm in section. 116 S & F rolled section as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connected plates confirming to Fe-410-W.Gde E-250 ,Quality A 117 M & L preparation ofnew steel surfaces of any description, over 10 cm in width or girth, not otherwise described, applying two cots of eynthetic enamel paint over red oxide, zinc chrome primer complete all as specified and as directed. 118 Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as completed. 119 S & F GI frame work Size of gnd 605 x 605mm for seamless celling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centrelintermediate channel 0 9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including coiling section (not exc 12 m length) of 0.55 mm thickness having kurfed web of 50 mm and fiange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and Hangers 6 mm dia G. (upto 1200mm length) adjusting level fixed to root stabs by means of ceiling cleats made out of G1 flat 40 x 3 mm size 60mm long and expansion hold fasteners 12 5mm dia, 40mm long complete all as specified.Note: Unit rate quoted shall include for necessary scaffolding, trestlers, ladders & cradlers required for execution of work 120 M & L for Providing and fixing 12mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G1 wire mesh (Fillets, metal frame work and GI wire mesh paid separately) with specified shape and architectural elevation complete all as specified an directed by Engineer in Charge.Note: Unit rate quoted shall include for necessary scaffolding, trestlers, ladders & cradlers required for execution of work 121 M & L for preparation of new gypsum board ceiling surfaces & applying two coat of Plastic emulsion paint over a coat of alkali resistant primer over plaster of pans putty of 2 mm thickness on ceiling surface complete all as specified.Note: Unit rate quoted shall include for necessary scaffolding, trestlers, ladders & cradlers required for execution of work 122 M & L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed 123 S & F in repairs standard wall mount stainless steel hand sink features a countertop edge with an offset to guard against drips and overflow, 1.00mm thick for kitchen or laboratory, with plug, wastepipe, washers, including cantilever castiron brackets, connecting union etc., overall size 2.3m X 0.45m with bowl size 2.0m X 0.35m X 0.4m complete all as specified and as directed.Note: Effective/clear dimensions of sink can be varried by ±5% with prior approval. 124 Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit includingremovalof batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified. 125 Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes all as specified. 126 Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site complete all as specified and directed. 127 M & L for Point wiring on concealed conduit with 1.5 Sq mm FRLS copper conductor single core PVC insulated sheathed 1100 V multistranded drawn through including rigid PVC conduit and conduit of dia medium grade and modular accessories including fixing/grouting sunken/ surface along with modular flush box of sutiable thickness covered with suitable modular cover plate including running up of 1.5 Sq mm FRLS copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for : NOTE: Rate of Modular Flush box and Cover plate are inclusive of rate quoted by the contractor 128 (a) One light/fan/Bell point controlled by one, one way switch 10 A, SP 129 All as per SL No 127 above but One 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. 130 All as per SL No 127 above but One 3 Pin 5 Amps switch socket Independt board. 131 Description all as per item No 127 here-in-before but using 2.5 Sq mm FRLS single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 5/15 Amps switch socket combination point including running of 2.5 Sq mm FRLS copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. 132 S & F Modular switch 1 way 10 A, 1 Module capacity 230 volts. 133 S & F Modular switch 1 way 16 A, 1 Module capacity 230 volts. 134 S&F Modular Bell Push 6A, 1 Module. 135 Supply and fix socket outlet modular type multipurpose 2/3 Pin, 10 amps, 230 volts combined 2 Module complete all as specified & directed. 136 Supply and fix socket outlet modular type multipurpose 2/3 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified & directed. 137 S & F Modular ceiling fan regulator stepped type heavy duty suitable to work on 230 volts, 2 Module complete all as specified & directed. 138 S & F calling Bell, AC, 230 volts, single polecomplete all as specified & directed 139 S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified. 140 S & F in replacement of Single pole and Neutral enclosure with a three pin and earth plug and socket metal clad complete with one singlepole MCB 20 Amps (AC Box) all as specified and directed. 141 S & F in replacement of Triple pole and Neutral enclosure with a two pin and earth plug and socket metal clad complete with one singlepole MCB 32 Amps (AC Box) all as specified and directed. 142 S&F in replacement sheet metal enclosure vertical type MCCB DB TPN 6 way double door having degree of protection IP 43-IK 09 with metal double door, 415 Volts, flush type made out of 1.2 mm thick thick CRCA sheet, metal duly powder coated and confirming to IS 8623 with suitable rated copper bus bar with neutral linkwith suitable rated bus bar 415 volts with ncluding 200 Amps MCCB 25 KA as incomer and 01 Nos outgoing TP MCBs of 63 Amps and 15 Nos outgoing SP MCBs withincluding provision for MCCB TPN as incomer and SP/TP MCBs as outgoing and total number of modules equal to MCCB TPN + 18 with blanking plates and fixed flush to wall and making good the disturbed surfaces etc, with magnetic locking system complete all as specified.Note : MCB SP/TPs shall be measured and paid seperately. 143 S&F in replacement sheet metal enclosure vertical type MCCB DB TPN 6 way double door having degree of protection IP 43-IK 09 with metal double door, 415 Volts, flush type made out of 1.2 mm thick thick CRCA sheet, metal duly powder coated and confirming to IS 8623 with suitable rated copper bus bar with neutral linkwith suitable rated bus bar 415 voltsincluding 200 Amps MCCB 25 KA as incomer and 06 Nos outgoing TP MCBs of 63 Amps with suitable rated copper bus bar with neutral link including provision for MCCB TPN as incomer and SP/TP MCBs as outgoing and total number of modules equal to MCCB TPN + 18 with blanking plates and fixed flush to wall and making good the disturbed surfaces etc, with magnetic locking system complete all as specified. Note : MCB SP/TPs shall be measured and paid seperately. 144 S&F in replacement sheet metal enclosure vertical type MCCB DB TPN 4 way double door having degree of protection IP 43-IK 09 with metal double door, 415 Volts, flush type made out of 1.2 mm thick thick CRCA sheet, metal duly powder coated and confirming to IS 8623 with suitable rated copper bus bar with neutral link with suitable rated bus bar 415 voltsincluding including 100 Amps MCCB 25 KA as incomer and 02 Nos outgoing TP MCBs of 63 Amps and 06 Nos outgoing SP MCBs including provision for MCCB TPN as incomer and SP/TP MCBs as outgoing and total number of modules equal to MCCB TPN + 12 with blanking plates and fixed flush to wall and making good the disturbed surfaces etc, with magnetic locking system complete all as specified. Note : MCB SP/TPs shall be measured and paid seperately. 145 S&F in replacement sheet metal enclosure vertical type MCCB DB TPN 4 way double door having degree of protection IP 43-IK 09 with metal double door, 415 Volts, flush type made out of 1.2 mm thick thick CRCA sheet, metal duly powder coated and confirming to IS 8623 with suitable rated copper bus bar with neutral link with suitable rated bus bar 415 voltsincluding including 100 Amps MCCB 25 KA as incomer and 01 Nos outgoing TP MCBs of 63 Amps and 09 Nos outgoing SP MCBs including provision for MCCB TPN as incomer and SP/TP MCBs as outgoing and total number of modules equal to MCCB TPN + 12 with blanking plates and fixed flush to wall and making good the disturbed surfaces etc, with magnetic locking system complete all as specified.Note : MCB SP/TPs shall be measured and paid seperately. 146 Supply, fix, connecting in replacement and testing factory made, distribution board, (MCB DB) TPN, 4 Way, having degree of protection IP 43-IK 09 with metal double door, 415 Volts, flush type made out of 1.2 mm thick thick CRCA sheet, metal duly powder coated and confirming to IS 8623 with suitable rated copper bus bar with neutral link including provision for MCB TPN as incomer and SP MCBs as outgoing and total number of modules equal to MCB TPN + 12 with blanking plates and fixed flush to wall and making good the disturbed surfaces etc, complete all ass specified and as directed. Note: MCB TPN and MCB SP will be measured and paid seperately. 147 S&F in replacement sheet metal enclosure vertical type MCCB DB TPN 6 way double door having degree of protection IP 43-IK 09 with metal double door, 415 Volts, flush type made out of 1.2 mm thick thick CRCA sheet, metal duly powder coated and confirming to IS 8623 with suitable rated copper bus bar with neutral linkwith suitable rated bus bar 415 voltsincluding 250 Amps MCCB 25 KA as incomer and 03 Nos outgoing TP MCBs of 63 Amps and 09 Nos outgoing SP MCBs with suitable rated copper bus bar with neutral link including provision for MCCB TPN as incomer and SP/TP MCBs as outgoing and total number of modules equal to MCCB TPN + 18 with blanking plates and fixed flush to wall and making good the disturbed surfaces etc, with magnetic locking system complete all as specified. 148 Supply, fix, connecting in replacementand testing MCB, Triple Pole Neutral (TPN) 40 to 100 Amps, 415 Volts of rupturing capactiy 10 KA, C Seriescomplete all as specified and as directed. 149 Supply, fix, connecting in replacementand testing MCB, Triple Pole TP 25 to 63 Amps, 415 Volts of rupturing capactiy 10 KA, C Seriescomplete all as specified and as directed. 150 S and F in replacment of sheet metal enclosure MCBDB SPN 12 way with suitable rated bus bar 240 Volts double door with magnetic locking system complete all as specified. 151 S and F in replacment of sheet metal enclosure MCBDB SPN 8 way with suitable rated bus bar 240 Volts double door with magnetic locking system complete all as specified. 152 S and F in replacement of sheet metal enclosure MCBDB SPN 6 way with suitable rated bus bar 240 Volts double door with magnetic locking system complete all as specified. 153 Supply, fix, connecting in replacement and testing MCB, Single Pole Neutral (SPN) 40/63 Amps, 415 Volts of rupturing capactiy 10 KA, C Series complete all as specified and as directed. 154 Supply, fix, connecting in replacement and testing MCB, Single Pole (SP), 6-32 Amps, 240 volts of rupturing capacity 10 KA, C series complete all as specified and as directed. 155 S & F in replacement Surface Modular Box of 6 way along with 6 way Modular plate and2 Nos of 16 Amps Switches and 6/16Amps multipurpose Sockets with connected internal wiring complete all as specified and directed by Engg in Charge. Note: Modular Plate, Switches & Sockets are inclusive of the rate quoted. Make: Indo Asian cat No. 800186,800166, 800103,800122 or equivalent make in Anchor Roma 156 M & L for Submain wiring with two single core 2.5 Sq mm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of2.5 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly completeincludingremovingtheexistingunserviceablesubmain wiringandmakinggood thedisturbed surfaceto match with the existing all as specified.Note:-two runs of cable, one run of earth contuinity conductor and one run of conduit shall bemeasured and paid as one unit length.NOTE: SUBMAIN WIRING SHALL BE REPLACED IN MAIN LOBBY OF OFFICER MESS WHICH IS AT HEIGHT IN THE RANGE UPTO 15 MTRS, COST OF SCAFFOLDING FOR RE-WIRING IF REQUIRED SHALL BE BORNE BY THE CONTRACTOR. 157 M & L for Submain wiring with two single core 4 Sq mm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of4 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly completeincludingremovingtheexistingunserviceablesubmain wiringandmakinggood thedisturbed surfaceto match with the existing all as specified.Note:-two runs of cable, one run of earth contuinity conductor and one run of conduit shall bemeasured and paid as one unit length. 158 M & L for Submain wiring with two single core 6 Sq mm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of6 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly completeincludingremovingtheexistingunserviceablesubmain wiringandmakinggood thedisturbed surfaceto match with the existing all as specified.Note:-two runs of cable, one run of earth contuinity conductor and one run of conduit shall bemeasured and paid as one unit length. 159 M & L for Submain wiring with four single core 6 Sq mm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of6 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly completeincludingremovingtheexistingunserviceablesubmain wiringandmakinggood thedisturbed surfaceto match with the existing all as specified.Note:-four runs of cable, one run of earth contuinity conductor and one run of conduit shall bemeasured and paid as one unit length. 160 M & L for Submain wiring with four single core 10 Sq mm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of10 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly completeincludingremovingtheexistingunserviceablesubmain wiringandmakinggood thedisturbed surfaceto match with the existing all as specified.Note:-four runs of cable, one run of earth contuinity conductor and one run of conduit shall bemeasured and paid as one unit length. 161 M & L for Submain wiring with two single core 10 Sq mm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of10 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly completeincludingremovingtheexistingunserviceablesubmain wiringandmakinggood thedisturbed surfaceto match with the existing all as specified.Note:-two runs of cable, one run of earth contuinity conductor and one run of conduit shall bemeasured and paid as one unit length. 162 Taking down ceiling fan/ exhaust fan, sealing cable end,dismantling blades, removing fan and shifting the all unserviceable ceiling fans/exhaust fans to MES store complete all as specified and directed. 163 Supply, fix, test and commissioning of Energy efficient ceiling fan with three blades, down rods andaccessories, 230V,1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE , Five star rated with brushless direct current motor (BLDC) fixed to roof/ceiling with suitable clamp including provisioning of flexbile copper cord of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan etc., complete all as specified and as directed. 164 Supply, fix, test and commissioning of Exhaust fan, metal body, AC single phase, 230 V of size 450 mm sweep heavy duty, 4 blades, copper winding with louvers shutters connecting up with and including provision of PVC insulated copper flexible cord from ceiling rose to connection of exhaust fan complete all as specified. 165 Supply, fix, test and commissioning of Exhaust fan, metal body, AC single phase, 230 V of size 300mm sweep heavy duty, 4 blades, copper winding with louvers shutters connecting up onnecting up with and including provision of PVC insulated copper flexible cord from ceiling rose to connection of exhaust fan complete all as specified. complete all as specified and as directed. 166 Supply and Fixing Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, Voltage 230 V, 50 HZ, RPM 1200, Copper winding of 250mm sweepconnecting up with and including provision of PVC insulated copper flexible cord from ceiling rose to connection of exhaust fan complete all as specified. 167 Taking down the geysers of capacity 25/35 from its mounting position by removing all water and electric connections and de-assembling the geyser after carrying out the following works, (a)Descaling, cleaning the inner tank thoroughly and there should not be any bad taste of water.(b)Examining the water tightness of storage tank after cleaning.(c)Examining the physical condition of thermostat, base assembly fusible plug and outer tank for its serviceability.(d)Inspection of pilot lamps.(e)Reassembling the geyser parts and testing including checking all electrical system (ensuring there is no current leakage) and also conducting hydraulic testing.(f)Re-fixing the Geyser and making electric connections,inlet and outlet water connections and testing and checking of all water inlet, outlet valves connected with geysers.Note : Defective /worn outpartsif required shall be measured and paid separetely under relevant items in this schedule. 168 Supply and fix rubber PVC connection of 2/3 feet complete, all as specified and as directed. 169 Supply & fix MS base plate cup any type with screws of suitable size as per requirement complete, all as specified and as directed. 170 Supply & fix heating element of the 1/1.5 KW rating as required at site including rubber washers of any make and type complete as per sample, all as specified and as directed. 171 Supply & fix Steel inner tank of 25 litre capacity geyser tank by made out of steel sheets appropriate thickness complete, all as specified and as directed . 172 Supply & fix thermostat suitable for the geysers of 25 Liters capacities complete, all as specified and as directed. 173 Supply & fix auto cut suitable for the geysers of 25 Liters capacities complete, all as specified and as directed. 174 Supply & Replace Air Release Valve suitable for geyser 25/50 ltrs all as specified and directed. 175 Supply and Fix Rigid non-metallic PVC conduit 25mm inclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.complete all as specified and directed. 176 Supply and Fix Rigid non-metallic PVC conduit 20 mm inclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.complete all as specified and directed 177 Supply and Fix Rigid PVC Casing & Capping of 25 mm wide including all accessories required for drawing of 1.5/2.5 sqmm wire complete all as specified and directed 178 Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. 179 S & F in replacement of wall mounted batten type LED light of 12 watts with aluminium extruded batten and system lumens of 1200 lm minimum with IP & surge protection alongwith driver efficiency >85% and power factor >0.95 , colour rendering index CRI>80 along with integrated driver completeand connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling roseall as directed.Make: Philips Model BN021 LED12S PSU GR or equivalent make in Havells/Wipro/GE. 180 S & F in replacement of wall mounted batten type LED light of 20/22 watts with aluminium extruded batten and system lumens of 2200 lm minimum with IP & surge protection alongwith driver efficiency >85% and power factor >0.95 , colour rendering index CRI>80 along with integrated driver completeand connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling roseall as directed.Make: Philips Model BN021C LED22Sor equivalent make in Havells/Wipro/GE. 181 S & F in replacement of Security Lights of 25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution with suitable pipe bracket 32 mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed.Make: Havells Model ENDURASUNDOWNSL25WLED765PASYBOPCIHDor equivalent make in Wipro 182 Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management inmultiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp fixed on wall with suitable flat iron clamps and nut bolts including connecting to multistranded copper conductor cable from light fitting to junction box complete all as specified and directed. 183 S & F of LED Luminarie 600mmx600mm 35/36 watts, 220 volts AC recessed mounting light fixture type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver 3 core flexible copper conductor cases of suitable size complete with lumianrie system efficacy >100 lm/wwith IP & surge protection of 10 kV, power factor >0.95 complete with all accessories all as specified and directed by Engg-in-Charge . Note: Cutting of False ceiling and re-arranging the False ceiling with existing size, Gypsum board/POP false ceiling is to be done if required. Cost of False ceiling work is inclusive of rate quoted. 184 S & F in replacement of round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders LED lamps suitable for roof ceiling including connecting up with 3 core flexible copper conductor cable of suitable size complete with lumianrie system efficacy >100 lm/wwith IP & surge protection of 10 kV, power factor >0.95 complete with all accessories all as specified and directed by Engg-in-Charge . Note: Cutting of False ceiling and re-arranging the False ceiling with existing size, Gypsum board/POP false ceiling is to be done if required. Cost of False ceiling work is inclusive of rate quoted. . 185 S & F in replacement of round shape spot light of 06 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders LED lamps suitable for roof ceiling including connecting up with 3 core flexible copper conductor cable of suitable size complete with lumianrie system efficacy >100 lm/wwith IP & surge protection of 10 kV, power factor >0.95 complete with all accessories all as specified and directed. Note: Cutting of False ceiling and re-arranging the False ceiling with existing size, Gypsum board/POP false ceiling is to be done if required. Cost of False ceiling work is inclusive of rate quoted. 186 Supply, fix, test and commissioning of Decorative wall mounting fixture of 09 Watts in durable plastic body and designer mesh in gold finish suitable for 9 W LED lamp complete with all accessories all as per Cat No LHFOECE1TZ1B014 of Havells or techno- commercially equivalent of other specified makes connecting up with and including twin/ three core twisted flexible copper conductor cable of suitable size etc. complete all as specified and as directed. 187 Supply and Fix in replacement of 2 module Modular white cover plate with frame complete all as specified and directed 188 All as per Ser item No 184 but 3 module Modular white cover plate with frame. 189 All as per Ser item No 184 but 4 module Modular white cover plate with frame. 190 Supply and fix in replacement ofPVC Round blocks ofsize 4for proper mouting LED tube lights alongwith connected items for fixing complete all as specified and directed. 191 Refixing of Serviceable items obtained from ser item No 3 such as LED security light/ flood light fittiingswith suitable pipe bracket 32 mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts including provision of 1.5/2.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed. 192 All as per ser item No 188 but items such LED tube light/Ceiling light fittings alongwith connected switch & sockets including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed. 193 Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts,check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15mm bore from earth elelctrode to test pointincl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipelight grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point made out of Bronze/Gun metalwith fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade.
Contract Date: Aug 07, 2025 Contract Value : ₹ 92.78 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Telangana View Result →
45.
Defence #7705491 AOC
Tender For Spl Repair To Bldg No T-135 In The Area Of Age B/R-I Under Ge Gwalior; 1 Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness (below or above ground level) incl the disposal upto 50M complete all as specified and directed. 2 Demolition of Reinforced Cement Concrete (Existing RCC water tank) of any description and in any position not otherwise specifically provided for complete all as specified and directed 3 M&L for PCC (1:5:10) type E2(using 40mm graded stone aggregate) as in sub base of floor or sunken floor etc complete all as specified and directed. 4 M&L for 25 mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in leveling course complete all as specified and directed. 5 M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 as in floors complete all as specified and directed. 6 Same as Item No 5 but tiles in vertical surfaces of wallset and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed. 7 M&L for non skid ceramic colouredtiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed. 8 M&L forglazed ceramic coloured tiles of size 350mm x 250mm x 7mm/ 450 x 300 x 7 mm thick in vertical surface set and jointed in neat cement slurry and pointed inwhite or colour cement to match, fix over and including 10 mm thick rendering in cement plaster 1:4 on fair facesbrick work or concrete surface complete all as specified and directed. 9 Dismantiling of stone slabs and tiles (Kota stone etc)of any discription or any thickness in floors, aprons, skirting, dado etclaid bedded and pointed in any mortar complete all as specified and directed. 10 M&L for Granite (of any type) tiles 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, laid over and including 15mm thick screed in CM 1:4 complete all as specified and directed. 11 Demolition of brickwork, plain cement concreteor stone/ boulder masonry, built in cement or lime mortar including allquoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified anddirected. 12 M&L for Brickworkwith subclass B bricks old size brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. 13 Brick work with sub class `B bricks straight or curved on plan exc 6m mean radius, built in CM 1:4, in half brick thick walls complete all as specified and directed. 14 M&L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in cover slabs for man holes, drain and set in CM 1:6 including necessary fromwork complete all as specified and directed. Note: Reinforcement shall be measured and paid separately. 15 M&Lfor mild steel TMT bars, 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. 16 Taking down cement plaster on brick or stone wallsetc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified anddirected. 17 M&L for 15mm thick rendering on brick or stone/concrete any surfaces in cement mortar 1:4mixed with liquid WPC @ 0.4% by weight of cement, surface finished even and smooth withoutusing extra cement complete all as specified and directed.Note : WPC shall be measured & paid seperately. 18 Supply only integral liquid water proofing compound (ISI marked) complete all as specified anddirected. 19 M&L for 10 mm thick rendering in cement mortaron fair faces of brick work or concrete surfaces in cement mortar (1:6) and surface finishedeven and smooth, complete all as specified and directed. 20 M&L for5 mm thick rendering in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed. 21 M&L for preparation of the newly plastered surfacesof ceiling & applying3 coats of white wash on ceiling surfaces complete all as specified and directed. 22 M&L for preparation of old decoratedsurface of ceiling and applying one coat of white wash complete all as specified and directed. 23 M&L for Preparation of new plaster surfaces of walls, applying 1-2 mm wall care putty on walls and two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification over a coat of primer complete all as specified and directed. 24 M&L for complete removal of existing treatment and two coats of Distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification on walls over a coat of primer complete all as specified and directed. 25 M&L for complete removal of existing treatment and two coats of Distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification on ceiling over a coat of primer complete all as specified and directed. 26 M&L for Preparation of new plaster surfaces of walls and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. 27 M&L for complete removal of exiting treatment from external walls (any numbers of layers) by scrapping with steel scrappers or any other means, preparation ofold surfaces complete applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. 28 Taking down ventilators of any type size not exc 1 Sqm each complete all as specified and directed. 29 S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed. 30 Supply only 3mm thick figured glass pin head type in square size n.exc 0.5 Sqm in each pane new ventilator/ window shutter complete all as specified and directed. 31 Taking down chowkhat frame with shutter (without taking out shutter from the frame) size n.exc 1.50 Sqm each complete all as specified and directed. 32 Taking down chowkhat frame with shutter (without taking out shutter from the frame) size exc 1.50 Sqm but n exc 4 sqm each complete all as specified and directed. 33 S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling & fixing in opening as per specification complete all as specified and directed. 34 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. 35 S&F for pressed steel frame of size 105 x 60 mm for door with one or more rebates makaing necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. 36 S&F 30 mm thick Flush shutters, soild coreconstruction with block board core and plywood face panels both face covered with decorative face veneer with lipping /frame to match and complete all as specified and directed. 37 M&L for repair Aluminum door of any type &any size, taking down and re-fixing including all small accessories (like handle, gaskit, hinges, tower bolt, door stopper etc) complete all as specified and directed.Note : Glass & Particle board etc shall be paid separately. 38 M&L for repair Aluminum window of any type &any size, taking down & refixing including all small accessories (like handle, rubber/gaskit, hinges, tower bolt, door stopper etc)complete all as specified and directedNote : Glass & wire mesh etc shall be paid separately. 39 S&F in renewal of door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked),suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. 40 S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. 41 S&F Anodised powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators, partitions with one or more rebates including jointing cleat for fixing etc complete all as specified and directed. 42 S&F anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips, rubber neoprene packing, handles two numbers in each door, 100mm long 03 Nos brass hinges, 200mm long aluminium tower bolts, 01 Nos door stopper anodised aluminium snap beading screws etc including M&L for fixing floor machene and godrej lock in each door complete all as specified and directed. 43 S&F anodised powder coated aluminium windows, ventillators shutters, slidding type, aluminium section weighing not less than 0.55 kg/m including necessary jointing cleats, Glazing clips, rubber neoprene packing,anodised aluminium snap beading screws, locking latches etc complete all as specified and directed. 44 S&F 5.5 mm thick sheet or tinted glassof selected qualityin square size not exceeding 0.5 sqm in each pane, fixed to aluminumframe with and including suitablerubber beadingcomplete all as specified and directed. 45 S&F 5.5 mm thick sheet or tinted glassof selected qualityin square size exceeding 0.5 sqm in each pane, fixed to aluminumframe with and including suitablerubber beadingcomplete all as specified and directed. 46 S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 47 S&F in renewal of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. 48 S&F in renewal of Solid PVC Wall lining consisting of 5mm thick prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed. 49 Dismantling boarding, any description, fixed in any position with nails (including Cupboard shutter/Shelve upto 25mm thick) complete all as specified and directed. 50 S&F for 18mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws, solvent cement/ adhesive complete all as specified and directed. 51 S&F for 12mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws, solvent cement/ adhesive complete all as specified and directed. 52 S&F forcontinuous (piano) hinges,mild steel, bright finished or electrogalvanised, width of flap 30mm complete all as specified and directed. 53 S&F formild steel Easy-slide auto Hydraulic hinges (CH-S-8), package contains 2 units of hinges with 4 Nos screw for kitchen cabinet, Cup board, wardrobe etc complete all as specified and directed. 54 S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. 55 S&F Brass 2 Levers Cupboard locks grade 1, Size 50mm complete all as specified and directed. 56 S&F for 100 mm Brass handles, cast type, polished bright and fixed complete all as specified and directed. 57 S&F for Butthinges, 100 mm size, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed. 58 S&F for 200 mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. 59 S&F forAluminium handles, cast type anodised of Size 150 mm complete all as specified and directed. 60 S&F for 300 mm size aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast aluminium alloy complete all as specified and directed. 61 S&F in renewal of 140mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. 62 M&L forpreparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 63 M&L forfor applying one coat of synthetic enamel paint on old steel & iron surfaces (previously decorated) for grills, guard bars of any description not otherwise described over 10cm in width or girth including preparation of old surfaces complete all as specified and directed. 64 Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) of any description and in any position, including all fittings, heads, shoes, bends, swan necks, etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. 65 S&F in renewal of 75 mm diaPVC (SWR) pipes single socketed in any length with rubber ring jointslaid in floor or fixed on wall with necessary clampcomplete all as specified and directed. 66 S&F in renewal of 110 mm diaPVC (SWR) pipes single socketed in any length with rubber ring jointslaid in floor or fixed on wall with necessary clamp complete all as specified and directed. 67 S&F for PVC (SWR) bends any radius, 75 mm bore, provided with access door complete all as specified and directed 68 S&F for PVC (SWR) bends any radius, 110 mm bore, provided with access door complete all as specified and directed. 69 S&F for 75 mm bore, PVC (SWR) junction single (single T) equal or unequal provided with access door complete all as specified and directed. 70 S&F for 110mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed. 71 M&L for PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed. 72 S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. 73 S&F in renewal of PVC (SWR) P or S trap 110mm, setting and jointing with solvent complete all as specified and directed. 74 S&F in renewal of PVC (SWR) floor trap/Nahani trap 75mm size plain with grating including setting and jointing with solvent complete all as specified and directed. 75 S&F rotational moulded polyethylene water storage tank of capacity 500ltr (cylindrical vertical with closedtop)double layer construction, ISI marked, hoisted and fixed in position including dismantling of old tank and removing from site complete all as specified and directed. 76 S&F rotational moulded polyethylene water storage tank of capacity 1000 ltr (cylindrical vertical with closedtop )double layer construction, ISI marked, hoisted and fixed in position including dismantling of old tank and removing from site complete all as specified and directed. 77 S&F in renewal of Ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe of 20mm bore of brass ferrule complete all as specified and directed. 78 Taking up or down 15 mm dia steel watertubing and connections including cleaning for refixingif required or removal from site complete all as specified and directed. 79 Taking up or down 20 mm dia steel watertubing and connections including cleaning for refixingif required or removal from site complete all as specified and directed. 80 S&F for15mm bore tubes medium grade galvanised with all fitting and fixed to walls and ceiling or laid in floor etccomplete all as specified and directed. 81 S&F for 20 mm bore tubes medium grade galvanised with all fitting and fixed to walls and ceiling or laid in floor etc complete all as specified and directed. 82 S&F in renewal of Stainless Steel Peg Set of 6 hooks ISI marked medium weight complete all as specified and directed. 83 S&F for frameless with LED light of size 600x450mm beveled edges mirror of selected quality mountedfixed to wall with rawal plug and screws complete all as specified and directed. 84 S&F in renewal of tublar towel rail aluminium anodised 20mm dia D type 60 cm long between flange brass chromium plated complete all as specified and directed. 85 S&F in renewal of PVC connection of 450 mm length and 15mm dia complete all as specified and directed. 86 S&F in renewal of bib taps, fancy type 15 mm size caste copper alloy long body, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe and fixedcomplete all as specified and directed. 87 S&F in renewal of Brass CP mixer for basin mixing hot and cold water screwed down for iron pipe complete all as specified and directed. 88 S&F for Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible and ABS wall hook including making connection and fixing in position complete all as specfied and directed. 89 S&F in renewal of flushing jet spray for wall hung EWC including 1 m long flexible pipe and brass chromium plated nuts, complete all as specified and directed. 90 S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and directed. 91 S&F in renewal of angular stop cock fancy type 15 mm caste copper alloy, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe and fixedcomplete all as specified and directed. 92 S&F in renewal of wash hand basin oval type, vitreous china, white (counter sunk type) of size 420 x 420 mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets cutting for and pinning in ends complete all as specified and directed. 93 S&F in renewal of 32mm bore waste fitting for wash basins and sinks with inlet and outlet, screwed for pipe or connections, and with one cleaning cap,complete all as specified and directed. 94 S&F for Wall mounted EWC with and including flushing cistern with concealed as per cat part No 20028 complete all as specified and directed. 95 M&L in renewal of vitreous china squatting pan, orissa pattern of size 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete and making good to floor, complete all as specified and directed. 96 S&Ffor PVC low level flushing concealed cistern (10 lts capacity) with ball valve float and handle syphonic action type including brackets and 32 mm dia flush pipe of polythelene of low or high density or PVCcomplete all as specified and directed. 97 S&F for renewal of Soap dish of CP fixed with PVC rawal plugs and screw, complete all as specified and directed. 98 S&F for renewal of Chromium plated grating of 100 mm dia complete all as specified and directed. 99 S&F for renewal ofvitreous china urinals, Half stall type, whitewith grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with 60 mm long brass screws, pointing around urinal back in cement and including fixing CP urinal spreader complete all as specified and directed. 100 M&L for removal of old APP based membrane of any description, hacking of plaster underneath and cleaning the roof surface complete all as specified and directed. 101 M&L for 10mm thick Screed bed or bedding layer of mortar on top of roof surfaces of any description in cement mortar 1:4mixed with liquid WPC @ 0.4% by weight of cement, surface finished even and smooth complete all as specified and directed.Note : WPC shall be measured & paid seperately. 102 M&L for bitumenous based primer conforming to IS-3384-1965 @ 0.40 Kg /Sqm including preparation of roof surface complete all as specified and directed. 103 M&L for APP based polymeric membrane minimumweighing 3.5kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application method complete all as specified and directed. 104 M&L for after laying the membrane apply bituminouse aluminium paint @ 200 gm/Sqm (minimum) in two coats complete all as specified and directed. 105 M&L for 75 mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate)finished even and smooth without using extra cement as in plinth protection including forming of joints 10mm wide and 75mm deep and joint filled with bitumin and sand mixture in 1:1 ratio complete all as specified and directed. 106 M&L for100 mm thick cement concrete (1:4:8) type D-2(using40 mm graded stone aggregate), as in sub base for floor, finished even and rough complete all as specified and directed. 107 M&L for60 mm thickness rubber moulded machine pressed precast concrete interlocking paver block M-35 any shape and size, confirming to IS 15658-2006 in grey cement glossy finish rubber mould casted laid dry over sandcushioning complete all as specified and directed.Note :- Sand filling will be measured and paid seperately in respective item of BOQ. 108 S&F Toilet paper holder of brass, chromium plated of stainless steel complete all as specified and directed. 109 Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed. 110 M&L for rolled mild steel in joist, channel, angle, tee sections fixed independently without connecting plate etc of Fe-410W (Gde-250) quality A completeall as specified and directed. 111 Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed. 112 S&F 0.50 mm thick pre -painted galvatume aluminium zinc coating GI based corrugated steel sheet of any colour haviing tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as specified colour as approved by Engr -in -Charge. 113 S&F 0.50 mm thick pre -painted galvalume aluminium zinc coating GI basedplain steel sheet of any colour haviing tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as in ridgespecified, colour as approved by Engr-in-Charge complete all as specified and directed. 114 M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, inculuding fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. 115 M&L for Dismantling of AC ceiling board any descrition complete all as specified and directed. 116 S&F for anodised aluminium snap grid frame work for false ceiling consists of powder coated aluminium angle of size 22x22x1.3 mm and Tee of size 35x25x1.3 mm and grid of size 600x600 mm complete all as specified and directed. 117 M&L for Nonasbestos fibre cement building boards 6 mm thickfixed or laid/ inserted to Aluminium anodised frame and hangesframeworkfixed withHangers 3-4 mm dia. G.I. (upto reqd length) adjusting level fixed to roof slabs by means of ceilling cleatscomplete all as specifed and directed. 118 S&F in renewal of Curtain rail stainless steel decorative type 20-25 mm dia including fixing bracket and end knobs complete all as specified and directed. 119 Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. 120 Taking down ceiling/exhaust fan of any sweep, removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including renewal of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and directed. 121 Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed. 122 Taking down unserviceable Sheet metal box & MCB DB SPN with MCBs of any make/capacity, complete all as specified and directed. 123 Taking down unserviceable TPN DBwith MCBs of any make/capacity, complete all as specified and directed. 124 M&L for concealed point wiring with PVC insulated and unsheathedelectric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade (ISI marked with valid CML No)not less than 20 mm diawith all fitting and fixing accessories and1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxesfactory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete all as specified and directed. 125 One light point controlled by one switch. 126 One Ceiling fan point controlled by one switch. 127 One Exhaust fan point controlled by one switch. 128 One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. 129 One 3 pin/5 pin switch socket outlet, 5 Amps on independent board. 130 One light point controlled by 2 xtwoway switches 131 Three light point controlled by one switch. 132 Description all as per item No 124 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire complete all as specified and directed. 133 S&F Modular switch 1 way 6 A,1 module complete all as specified and directed. 134 S&F modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed. 135 S&F Modular switch 1 way 16 A,1 module complete all as specified and directed. 136 S&F modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. 137 S&F modular switch piano, flush button (2 way)two way 5 Amp complete all as specified and directed. 138 S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. 139 S&F modular Fan step regulator, 120W - 2 module 240 volts, AC 50Hz complete all as specified and directed. 140 S&F modular Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete all as specified and directed. 141 S&F LED Lamp 12 Watt complete with 5 star rating complete all as specified and directed. 142 Supply and fixing LED luminaire of size 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. 143 S&F Decorative ultra slim LED Tubelight fitting of LEDwith extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 4000k to 6500k as per required fitting including reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor forelectrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed. 144 S&F security light fittings better optics for uniform distribution IP 66 protection LED of 30 watt with photometric sensor automatic on/off at night/morning, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm size FI, with 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqdlength of 1.5 Sqmm PVC multistranded BIS marked, 03/02 core copper conductor for connection from ceiling rose to light fittings including testing on completion complete all as specified and directed. 145 S&F 9 Watt Concealed Ceiling LED Light in Round shape Lighting, 4000k to 6500k as per required fitting including reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor forelectrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed. 146 S&F Solar LED Pathway Lamp BIS Approved IP65 Water proof Bollard Landscape Lamp with 800mAh Ni-MH Battery & Panel Decoration LED Spotlight for Walkway 2.5 ft Height including all accesseries Lighting Color -Warm/White complete all as specified and directed. 147 M&L for sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. 148 M&L for sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. 149 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. 150 Supply and fix exhaust fan, steel body AC single Phase 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. 151 Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mcomplete all as specified and directed. 152 S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 160 Amp, 4 pole & including MCCB 160 amps 4 pole 25 KA complete with suitable size of busbar complete, fixed flush in wall including chases wall for fixing DB and making goodthe distributed wall surfaces to match with existing specification including taking down complete all as specified and directed. 153 S&F MCB DB, sheet metal enclosures double door SPN 12 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR)type with blanking plates where required and IP 43 degree protection complete all as specified and directed. 154 S&F, MCB SPN63 Amps, 240 volts C series 16 KA including connection with suitable size copper lugs complete all as specified and directed. 155 S&F, MCB SP 240 volts, 6 to 32 Amps, C series 10 KA including connection with suitable size copper lugs complete all as specified and directed. 156 S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified and directed. 157 Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable(Heavy duty) with aluminium conductor 1100 volts grade, cross sectional area size 35 Sqmm 3.5 Core complete all as specified and directed. 158 Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. 159 Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed. 160 Removing of surplus soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. 161 Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and directed. 162 Supplying and laying un reinforced precast concrete cable coverClass LV, Type I, flat size 250mm x 150mm x 40mm complete all as specified and directed. 163 S&F tube Light grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed. 164 Supply and fix cable jointing kit for 1.1 KVgrade cable for endjoint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type complete all as specified and directed. 165 Taking out old u/s pipe line alongwith fittings from existing connections of size 25 mm dia complete all as specified and directed. 166 M&L for GI pipe Med grade of 25 mm dia alongwith all fittings and fixtures complete laid in trenches complete all as specified and directed. 167 M&L for GI pipe Med grade of 20 mm dia alongwith all fittings and fixtures complete laid in trenches complete all as specified and directed. 168 S&F in renewal of 25 mm dia Brass Gate Valve cofiorming to IS 14846/2000, ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts fixed at any location complete all as specified and directed. 169 S&F in renewal of 20 mm dia Brass Gate Valve cofiorming to IS 14846/2000, ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket, bolts and nuts fixed at any location complete all as specified and directed. 170 M&L for earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm size mild steel angle iron frame for cover, 10mm thick plaster in CM 1:4 on internal surface of concrete, 40mm thick precast cover RCC (1:2:4)type B-1 (using 20mm graded BT stone aggregate) reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of MS Flat of size 50 x 5 mm in D shape 500 mm legth grouted in wall complete 1 x 6 sqmm multistrand PVC insulated copper conductor (Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed. 171 S&F for modular plate and provising of new modular plate of different size with flush metel boxincluding fixing, the existing modular switchs, modular socket, modulare regulator and refixing them in new board 172 White cover plate with frame but 2 module 173 White cover plate with frame but 3 module 174 White cover plate with frame but 4 module 175 White cover plate with frame but 6 module 176 White cover plate with frame but 8 module 177 White cover plate with frame but 12 module
Contract Date: Aug 06, 2025 Contract Value : ₹ 29.08 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 10
Madhya Pradesh View Result →
46.
Defence #7692644 AOC
Repair Replacement Of Internal Electrification, Fittings Fixtures, Renewals Of Wiring, Bldg Security Lights, Dbs And Connected Works Including Day To Day Services In Tech Area At Afs Thanjavur.
Contract Date: Aug 05, 2025 Contract Value : ₹ 27.47 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Tamil Nadu View Result →
47.
Defence #7664986 AOC
Repair Replacement Of Internal Electrification, Fittings Fixtures, Renewals Of Wiring, Bldg Security Lights, Dbs And Connected Works Including Day To Day Services In Domestic Area At Afs Thanjavur.
Contract Date: Jul 24, 2025 Contract Value : ₹ 19.49 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Tamil Nadu View Result →
48.
Defence #7626203 AOC
Repair Replacement Of Internal Wiring Electrical Fittings Fixtures Renewal Of Bldg Earthing Other Connected Items In Ro Of Otm Accn At Bansawadi Garrison Under Ge North Bangalore
Contract Date: Jul 18, 2025 Contract Value : ₹ 32.51 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Karnataka View Result →
Karnataka View Result →
50.
Defence #7621391 AOC
Repair Replacement Of Internal Wiring Electrical Fittings Fixtures Renewal Of Bldg Earthing Other Connected Items In Ro Of Md Accn At Meg Centre And Fmme Toc Poc 32 Key Pers Qtrs Under Ge North Bangalore
Contract Date: Jul 18, 2025 Contract Value : ₹ 32.27 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Karnataka View Result →
TenderDetail
Loading tenders