View Bid Results For Rcc Stone Tenders

We found 10000 Bid Results related to rcc stone tenders. You can find Contractor details who won rcc stone tenders along with contract details in Bid awards announcements section.

Filters
Stage
8230
3538
2412
Tender Publishing Platform
513
13667
State / UT
38
4205
2556
1300
1242
869
640
502
374
340
269
216
186
180
179
133
126
119
119
86
66
65
57
50
43
42
41
29
28
26
21
20
17
14
7
5
4
3
1
Contract Value
6887
2474
3794
967
Publish Date
16
1
0
0
0
Sector
31
4050
3923
2084
1338
443
440
440
347
228
173
105
97
78
74
70
54
42
31
31
28
19
17
14
13
13
10
9
4
3
1
1
Ownership
7
6951
4626
2090
465
33
14
1
Within keyword
Active filters:
Showing 1–50 of 10000 tenders matching your filters
1.
Defence #11482821 AOC
Tender for Lump Sum Price Worked Out By The Contractor For Buildings And StructuresAs Listed In Schedule A Part-I Note: This Schedule Is Not Pre-Priced By Mes And The Rate Indicated As Rs 0.00 Under Col 6 Signifies This Fact Only.The Tenderer Is Required To Quote Their Rate Under Col 13 Against Item Of Works Catered Under This Schedule . , Construction Of Block Of Pump House Building Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Construction Of Block Of Fire Fighting Pump House Building Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Construction Of Block Of Power House Building Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Construction Of Ug Sump Of Capacity 125000 Ltrs Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Construction Of Static Water Tank (Swt) Of Capacity 75000 Ltrs Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Construction Of Over Head Tank Of Capcity 40000Ltrs With 21 Metre Staging Including All Fittings And Fixtures, Complete All As Shown On Drawings And As Per Specifications. , Sch A Part-Ii To X: Note: These Schedules Are Pre-Priced By Mes And The Rate Indicated Against The Respective Schedule Under Col 6 Signifies This Fact Only. The Tenderer Is Required To Quote Their Lumpsum Amount Under Col 13 Against Item Of Works Catered Under These Schedule . , Lumpsum Price Inserted Under Col 13 By The Tenderer For Site Clearance / Site Development, Excavation & Earth Work For External Services, Etc.., As Listed In Schedule ‘A Part Ii Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part Ii , Lumpsum Price Inserted Under Col 13 By The Tenderer For Internal Water Supply As Listed In Schedule ‘A Part Iii Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part Iii , Lumpsum Price Inserted Under Col 13 By The Tenderer For Internal Electrification As Listed In Schedule ‘A Part Iv Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part Iv , Lumpsum Price Inserted Under Col 13 By The Tenderer For Road / Path / Hard Standing As Listed In Schedule ‘A Part V Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part V , Lumpsum Price Inserted Under Col 13 By The Tenderer For Sewage Disposal As Listed In Schedule ‘A Part Vi Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part Vi , Lumpsum Price Inserted Under Col 13 By The Tenderer For Area Drainage As Listed In Schedule ‘A Part Vii Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part-Vii , Lumpsum Price Inserted Under Col 13 By The Tenderer For Chain Link Fencing With Gate As Listed In Schedule ‘A Part Viii Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part-Viii , Lumpsum Price Inserted Under Col 13 By The Tenderer For External Water Supply As Listed In Schedule ‘A Part Ix Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part-Ix , Lumpsum Price Inserted Under Col 13 By The Tenderer For Fire Fighting As Listed In Schedule ‘A Part X Representing The Percentege Arrived Under Col 54 Above/Below The Lumpsum Estimated Rate Inserted Under Col 6 By The Mes In Schedule ‘A Part-X , Schedule A Part-Xi (Miscellaneous B/R And E/M Items) Note: This Schedule Is Not Pre-Priced By Mes And The Rate Indicated As Rs 0.00 Under Col 6 Signifies This Fact Only.The Tenderer Is Required To Quote Their Rate Under Col 13 Against Item Of Works Catered Under This Schedule . , Site Clearance / Site Development, Excavation & Earth Work For External Services, Etc.., Removing Excavated Material N Exc. 50M And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point, Complete All As Specified And As Directed. , Internal Water Supply Supply And Fix C. P. Brass Fancy Type Pillar Cock 15 Mm Nominal Bore Of Approved Quality Conforming To Is Standards Complete All As Specified And As Directed. , Internal Electrification Supply And Layng Wiring For One 3 Pin Socket Outlet. 15 Amps, Independent, With Frls Pvc Insulated Copper Conductor Single Core Cables With 3 Runs Of 4 Sq. Mm Size Including Concealed Pvc Conduit And Conduit Accessories, Complete All As Specified And As Directed. Note : 3 Runs Of Cable And One Run Of Conduit Shall Be Measured As One Unit. , Supply And Fixing Led Lights Fitting 1X 20W, 220V, Ac Decorative Box Type With Driver, Holder Including Led Tube Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose, Complete All As Specified And As Directed. , Supply And Fixing Led Street Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminum Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65/66 Protection, Complete All As Specified And As Directed. , Supply And Fixing Led Flood Light 100 Watt 230 V Ac Outdoor Type With Thermal Management In Multiple Optics And Equipped With Ip66 Protection, With Impact And Corrosion Resistant Complete With Driver And Lamp, Complete All As Specified And As Directed. , Supply And Fix Exhaust Fan, Steel Body Ac Single Phase. 230V Of Size 300 Mm Sweep With, Blades, And Frame And Louvers Complete All As Specified And As Directed. , Supply And Fixing Air Circulator Heavy Duty (Wall Mounting) Fan 450 Mm Sweep, 230V, Ac, 50 Hz Complete All As Specified And As Directed. , Sewage Disposal Material And Labour For Soakage Wells Excavation, In Any Type Of Soil, Foundation In Plain Cement Concrete 1:3:6, Walls Of Honey Combed Masonry With Top Ring Of M25 Concrete Including Intercepting Chamber And Screen Chamber Made Of Brick Masonry In Cm, Reinforced Cement Concrete Cover Slab In M25/ Steel Fibre Reinforced Concrete Cover, Inter Connecting Pipes Of Rcc/Dwc Complete Filled With Brick Bats Of Size 1.2X3.0M Effective Depth Complete All As Specified And As Directed. , Material And Labour For Lldpe Septic Tank For 05 Users Designed To Carry Sewage And Sullage Water, Including Excavation In Any Type Of Soil, Plain Cement Concrete 1:4:8 Below Foundation, Vent Shaft, Connection Etc, Complete All As Specified And As Directed. , Area Drainage Material And Labour For Extra Over Stone Walling For Hammer Dressing To Face Stones And Dressing Of Face Beds And Joints As Specified Of Face Beds And Joints As Specified Of Random Rubble Walling Uncoursed Or Brought Upto Course With 40Mm Maximum Depression On Face From Straight Edge Held Against The Dressed Surface Complete All As Specified And As Directed. , Material And Labour For Plain Cement Concrete (1:2:4) Type B-1, Using 20 Mm Graded Stone Aggregate As In Surface Channels And Drains Etc, Complete All As Specified And As Directed. , Material And Labour For Extra For Forming Fair Finished Drain Or Channel 60 Cm Inner Girth In Cement Concrete, Using Extra Cement, Including Forms, Moulds, Mitred/Stopped Ends Etc, Complete All As Specified And As Directed. Note: Inner Girth Olny Measured. , External Water Supply Material And Labour For Constructing Masonry Chamber 120X120x100 Cm Inside, In Brick Work In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.I. Surface Box 100 Mm Top Diameter, 160 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) , Including Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 7.5, Complete All As Specified And As Directed. , Material And Labour For Constructing Masonry Chamber 90X90x100 Cm Inside, In Brick Work In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.I. Surface Box 100 Mm Top Diameter, 160 Mm Bottom Diameter And 180 Mm Deep (Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ), Including Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size ) And Inside Plastering With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 7.5, Complete All As Specified And As Directed. , Supply And Fix 100Mm Dia Bore Ci Sluice Valve Flanged End Of Class Pn -1.6 With Brass Spindle And Hand Wheel Including Necessary Gasket, Nuts And Bolts, Washer Etc., Complete All As Specified And As Directed. , Supply And Fix Ci (Cast Iron) Foot Valve Conforming To Is 4038, 100 Mm (4) Dia Complete With Rubber Gasket, Gi Bolts, Nuts, Washers Etc Complete All As Specified And As Directed. , Supply And Fixing G.I. Pipes, Medium Grade Of Size 80 Mm Dia Nominal Bore Complete With G.I. Fittings Complete All As Specified And As Directed. , Supply And Fixing G.I. Pipes, Medium Grade Of Size 50 Mm Dia Nominal Bore Complete With G.I. Fittings Complete All As Specified And As Directed. , Supply And Fixing G.I. Pipes, Medium Grade Of Size 25 Mm Dia Nominal Bore Complete With G.I. Fittings Complete All As Specified And As Directed. , Supply And Fix Pressure Gauge 4Dial 0-14 Kgs Rating Complete All As Specified And As Directed. , Material And Labour For Xlpe Insulated, Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 Volts Grade, Cross-Sectional Area 16 Sq. Mm, 3 Core, Isi Marked, Conforming To Is: 7098 (Part 1)-1988 Having Stranded Aluminium Compact Shaped Conductor As Per Cl. 2, Is: 8130-1984, Pvc Inner Sheath, Single Armouring Of Galvanized Steel Strip / Wire And Pvc Type St-2 Outer Sheath Conforming To Is: 5831-1984, Including Termination Complete As Specified And As Directed. , Supply, Installation, Testing And Commissioning Of Monoblock Pump Set Suitable For 415 V, 3 Phase System Having Capacity 10 Hp/ 7.5 Kw, 24-39 Metre Head, 3000 Rpm, Discharge Range 1150-550 Lpm, Suction And Delivery Pipe Size 80 X 65 Mm Dia Including Foundation, Base Frame Etc. Complete All As Specified And As Directed. , Supply, Laying & Testing Pvc Insulated, Pvc Sheathed Cable Galvanized Steel Strip Or Wire Armoured, Electric Control Cables (Heavy Duty) With Stranded Copper Conductor Of Size 2.5 Sq Mm, 3 Core, 1100 Volts Grade, Extruded Pvc Type St2 Sheathed, Conforming To Is 7098 (Part 1) 1988 Complete All As Specified And As Directed. , Supply And Fix Dol Control Panel, 3 Phase, Voltage Range 275-475Volts, 5 Hp/3.75 Kw, Relay Range 6-10A Complete All As Specified And As Directed. , Supply, Installation, Testing And Commissioning Of Monoblock Pump Set Suitable For 415 V, 3 Phase System Having Capacity 5 Hp/ 3.5 Kw, 24-39 Metre Head, 3000 Rpm, Discharge Range 900 Lpm, Suction And Delivery Pipe Size 50 And 40 Mm Dia Including Foundation, Base Frame Etc. Complete All As Specified And As Directed. , Supply, Install, Testing And Commissioning Of Weather Proof Lt Panel Indoor Type Made Out Of Crca Sheet 2.0 Mm Thick, Cubical Type Factory Made With Front Opening Type Free Standing, Suitable For 415 Volts, 3 Phase, 4 Wire, 50 Hz, Ac Supply Having 4 Nos Aluminium Bus Bars Of 200 Amps Capacity Duly Insulated With Heat Shrinkable Colour Coated Sleeve Complete, Painted With Powder Coated With Locking Arrangement, Mounted On Ms Angle Base Frame Of Size 50 X 50 X 6Mm Including Grouting In Pcc. The Lt Panel Povided With The Following Accessories Complete All As Specified And As Directed :- (A) Mccb 415 Volts 4 Pole 125 Amps, 18Ka - 01 (As Incomer). (B) Digital Led Multi Function Meter With Inbuilt Selector Switches, Class 0.5 Including Cts - 01 No. (C) Phase Indicated Lamp Led Type With Back Up Fuse For 3 Phase - 02 Set (Ryb). (D) Mccb 415 Volt 4 Pole 63 Amps 16 Ka - 03 Nos (As Out Going). (E) Mcb Spn 40 Amps, 10 Ka, C Curve - 02 Nos, (F) Star-Delta Starter 10 Hp/ 7.5 Kw, 20-32A, 275-475 Voltage - 02 Nos , Supply, Install, Testing And Commissioning Of Weather Proof Lt Panel Indoor Type Made Out Of Crca Sheet 2.0 Mm Thick, Cubical Type Factory Made With Front Opening Type Free Standing, Suitable For 415 Volts, 3 Phase, 4 Wire, 50 Hz, Ac Supply Having 4 Nos Aluminium Bus Bars Of 200 Amps Capacity Duly Insulated With Heat Shrinkable Colour Coated Sleeve Complete, Painted With Powder Coated With Locking Arrangement, Mounted On Ms Angle Base Frame Of Size 50 X 50 X 6Mm Including Grouting In Pcc. The Lt Panel Povided With The Following Accessories Complete All As Specified And As Directed :- (A) Mccb 415 Volts 4 Pole 125 Amps, 18Ka - 01 (As Incomer). (B) Digital Led Multi Function Meter With Inbuilt Selector Switches, Class 0.5 Including Cts - 01 No. (C) Phase Indicated Lamp Led Type With Back Up Fuse For 3 Phase - 02 Set (Ryb). (D) Mccb 415 Volt 4 Pole 63 Amps 16 Ka - 03 Nos (As Out Going). (E) Mcb Spn 40 Amps, 10 Ka, C Curve - 02 Nos, (F) Star-Delta Starter 10 Hp/ 7.5 Kw, 20-32A, 275-475 Voltage - 02 Nos
Contract Date: Jul 01, 2026 Contract Value : 2.63 Crore
Statutory Bodies & Commissions/Committees No of Bidders 3
Maharashtra View Result →
2.
Rural Development #11481883 AOC
Tender For Annual Plan-Kuzhimanna Grama Panchayat Installation Of Mini Mast Lights-So315/26-General Electrical Work - wiring 2 90.15.1.1:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter. 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x16mm suitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos existing RCC foundation and junction box etc, complete 8 Meters 3 90.15.4.8:Supply Conveyance, installation, testing and commissioning of 120W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 4 14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. 5 14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement). 6 14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels 7 90.6.5.12:Supply and drawing the following sizes of multi-core PVC insulated & FRLSPVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 2.50 sq mm 8 OD257774/2025-2026:SupplyandfixingoffollowingsizesofCorrugated PVC flexible conduit alongwithaccessoriesin surface/recess of proposed pole andmakinggoodthesameincaseofrecessed conduit as required 25 mm Corrugated PVC flexible conduit 9 1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm 10 OD257790/2025-2026:Supply,installation,testing and commissioning ofDigital time swtch 40A, 2pole , AC1 rated power contactor with 1NO+1NC auxiliary contacts with AC coil and 24 Hours timer for operating automatic ON-OFF function suitable for single phase supply 11 2.21:Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 12 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 13 2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole 14 2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps 15 OD257771/2025-2026:Supply and Fixing of 1P+N,40KA,1 module surge protector on existing MCB DB/enclosure/Meter Board etc and giving connection as required. (Schneider A9L40500 or equivalent) 16 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 17 OD257773/2025-2026:5 mm X 3 mm G.I. strip earth lead Supplying and Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate 18 OD257775/2025-2026:Supply and installation of dust and vermin proof, 3 Phase Syntax Meter Board( GS-MB-5345-NF ] and to fix KSEB meters, fuse units, CT etc as required including fixing it on wall, making good the damages colour washing etc. as required 19 OD257780/2025-2026:Supplying and Fixing DIN rail inside the existing MCB DB/ Panel/Meter board etc 20 OD257777/2025-2026:Supplying and fixing32 A, 2 Way neutral links mounted on DMC/SMC base with connections, in existing meter board 21 OD257781/2025-2026:Supplying and fixing32A, HRC Fuse with HRC Fuse link with connections, in existing meter board 22 OD257778/2025-2026:Supplying and fixing of following sizes oflight class PVC conduit along with accessories in surface/ recess including cutting the wall/ground and making good the same in case of recessed conduit as required as service pipe 23 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board 24 OD257875/2025-2026:Supply, Providing and fixing Granite of any colour and shade for Name board, of required size laid over base of cement mortar 1:4 (1 Cement : 4 Coarse sand), including all charges etc. complete all, levels, including lettering and fixingetc as required at site. 25 OD257779/2025-2026:Charges for procurement, preparation and submission of application for availing single/three phase KSEB service connection with necessary Sketch, Test and completion report, etc. including necessary liaison work as required
Contract Date: Jul 01, 2026 Contract Value : 1.14 Lakh
Local Bodies No of Bidders 2
3.
Rural Development #11480902 Price Bid
Tender For Supply Of Construction Material At Gp/Malegaon(Ta)/Zp/Ngp/Tender No1/2026-27/1St Call- 1 Item Wise Boq Boq_Ver3.0 Item Wise Normal Inr Only Inr Select, Excess (+), Less (-) Tender Inviting Authority: Sarpanch/Gramsevak Grampanchayat Malegaon(Ta), Panchayat Samiti Saoner, Dist Nagpur Name Of Work: Supply Of Construction Material For All Scheme At Gp Malegaon(Ta), Ta Saoner, Dist Nagpur Contract No: Zp/Ngp/Gp/Malegaon(Ta)/Supply Of Construction Material For All Scheme /Tender/ No1/2026-27 Prmdet Name Of The Bidder/ Bidding Firm / Company : Price Schedule(Domestic Tenders - Rates Are To Given In Rupees (Inr) Only)(This Boq Template Must Not Be Modified/Replaced By The Bidder And The Same Should Be Uploaded After Filling The Relevant Columns, Else The Bidder Is Liable To Be Rejected For This Tender. Bidders Are Allowed To Enter The Bidder Name And Values Only ) Number # Text # Text # Number # Text # Number Number Text Text # Number # Text# Text # Number # Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number # Number # Text Text Number # Number # Date Number # Number # Text # Sl.No. Item Code / Make Quantity Units Estimated Rate Inrs. P Addition / Deduction Addition / Deduction Values Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Basic Rate In Figures To Be Entered By The Bidder Inrs. P Excise Duty Amount In Inr Rs. P Gst Amount In Inr Rs. P Freight Charges ( Unloading & Stacking) Inrs. P Any Other Taxes Inrs. P Any Other Duties/Levies Inrs. P Iiird Party I.E Dgs&D / Rites Etc Inspection Charges @0.34%+Service Tax Less For Cenvat Credit,If Any Respect Of Supplies Under Full Excise Duty Category Total Amount Without Taxescol (13) = (4) X (7) Inrs. P Total Amount With Taxescol (14) = Sum (8) To (13) Inrs. P Total Amount In Words 2 Items : 3 Acc Cement 53 Gred ( I.S.I.) 4 Ultratech Cement 53 Gred ( I.S.I.) 5 Ambuja Cement 53 Gred ( I.S.I.) 6 Bricks (Red) 7 Bricks (Ash) 8 Bricks (Cement) 9 Gi Sheet 10 Sand Kanhan 11 Sand Black 12 Soft Murum 13 Hard Murum 14 Soil (Red) 15 Soil (Black) 16 Metal 10 Mm 17 Metal 20 Mm 18 Metal 40 Mm 19 Metal 60 Mm 20 Metal 80 Mm 21 Steel 6 Mm 22 Steel 8 Mm Tmt Fe 500 23 Steel 10 Mm Tmt Fe 500 24 Steel 12 Mm Tmt Fe 500 25 Steel 16 Mm Tmt Fe 500 26 Steel Gril Work 27 Kota Stone 28 Tiles Vetryfide (2*2 Fit) 29 Pelving Block Hydrolick Mode 30 Pelving Block Rubber Mode 31 Cement Paver Blocks 60 Mm 32 Rcc Cement Pipe 250 Mm 33 Rcc Cement Pipe 300 Mm 34 Rcc Cement Pipe 450 Mm 35 Rcc Cement Pipe 600 Mm 36 Rcc Cement Pipe 900 Mm 37 Centring Tar 38 Mixure Machine 39 Vibratar 40 Roller 41 Water Tanker 6000 Ltr Total In Figures 0.0 0.0 Inr Zero Only 4.0 Construction Of Chamber For 100Mm Sluice Plates Item5 10.0 Nos Quoted Rate In Figures Select % 0.0 0.0 Zero Only Quoted Rate In Words Inr Zero Only Please Enable Macros To View Boq Information
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
4.
Defence #11478095 Technical Bid
Tender For Provision Of Certain Revenue And Minor Work At Age B/R Ii Under Ge(N) Patiala=- 1 Dismantling, Floor, Hearth Or Wall Tiling Including Cm (Bedding (But Not Backing), Removing Serviceable Tiles To Store & Rubbish Off The Premises Complete All As Specified And Directed 2 M&L For Single Charge, Vitrified, Stain & Scratch Resistant, Premium Quality Coloured Tiles Area Of Each Tiles Exceeding 0.42 Sqm But Not Exceeding 1.00 Sqm, In Floors Etc Mm And 8-10 Mm Thick, In Any Pattern Of Light & Dark Tiles As Approved, Laid Over 15 Mm Thick Screed In Cm (1:6) Epoxy Cartridge Tile Grout Using Filling The Joint Of Tiles Complete All As Specified.Note- Epoxy Black,Golden Colour,Complete All As Specified And Directed. 3 All As Per Item No 2 Above But As In Skirting Over 10 Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed. 4 M&L For Ceramic Glossy Finish, Joint Free Premium Quality Coloured Tiles 600 X 300 Mm And 8-9 Mm Thick, In Any Pattern Of Light & Dark/Highlighters Tiles Etc As Approved, On Vertical Surfaces Such As In Skirting/Dado Etc, Set And Including 10 Mm Thick Rendering In Cement Mortar (1:4) And Pointed In White Cement With Pigment To Match The Colour Of Tiles Complete All As Specified. 5 M & L For 15 Mm Thick Artificial Granite (Of Any Type) Work Steps, Jambs, Pillars, Window- Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite. Including Screed Bed Or Bedding Layer Of Mortar 20 Mm Thick For Laying Floor Finishes Complete All As Specified. 6 Providing And Laying Premium (1St) Quality Straight Edge, Ceramic Tiles Exterior Grade Scratch Resistance Of Size 300X300X7 To 8 Mm Thick In Floors Etc. In Any Shade And Design/Pattern Of Light & Dark Tiles Etc Set And Including 15 Mm Thick Rendering In Cement Mortar (1:6) And Pointed In White Cement With Pigment To Match Complete All As Specified. 7 Taking Up Or Down Existing Steel Tubing And Connections, 15Mm Bore Complete All As Specified. 8 S&F For Cpvc Pipe Fixed On Wall/Ceiling Or Laying In Floor Of 15Mm Bore Incl Fittings Complete All As Specified And Directed. 9 Taking Up Or Down Existing Steel Tubing And Connections, 20Mm Bore Complete All As Specified. 10 S&F For Cpvc Pipe Fixed On Wall/Ceiling Or Laying In Floor Of 20Mm Bore Incl Fittings Complete All As Specified And Directed. 11 S&F In Repair Angle Stop Cock With Wall Flange 15Mm Cast Copper Alloy, Screwed For Iron Pipe Or For Brass Ferrule Long Body.Make: Jaquar Cat Part No-Fon-40053Pm Or Equivalent In /Hindware/Kohlar. 12 S&F In Repair 15 Mm Bore Bib Cock With Wall Flange, Cast Copper Alloy, Chromium Plated, Fancy Type With Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Long Body.Make: Jaquar Cat Part No Opp-15037Pm Or Equivalent In/Hindware/Kohlar. 13 S&Fin Repair Brass Chromium Plated Basin Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe Of 15Mm Bore All As Specified And As Directed. Make: Jaquar Cat Part No Orp-10011Bpm Or Equivalent In /Hindware/Kohlar 14 S&F In Repair 15Mm Cp Connection 600Mm Long Including Washer And Brass Nuts All As Specified. 15 S&F In Repair Europen Wc China Ware Coloured Cascade With Cistern And Complete Fitting.Make: Jaquar/Hindware/Kohlar 16 S&F In Repair Counter Top Wash Basin Of Size 600 X465Mm With Wash Basin Cabinet Size 600X455X600Mm Including Bottle Trap , Brass Waste Fitting Complete All As Specified. Make:-Cera/Hindware/Jaguar 17 S&F In Repair Toilet Roll Holder Stainless Steel Flap All As Specified. Make- Jaquar Cat Part No Can-1153S Or Equivalent In /Hindware/Kohlar 18 S&F In Repair Towelrack 600Mm Long With Lower Hanger (Stainless Steel) All As Specified.(Make: Jaquar Cat Part No Acn -1181S Or Equivalent In /Hindware/Kohlar 19 S&F In Repair Soap Dispenser With Glass Bottle (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Acn -1135N As Equivalent /Hindware/Kohlar 20 S&F In Repair Soap Dish Holder With Glass (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Akp -35731P Or Equivalent In /Hindware/Kohlar 21 S&Fin Repair Towel Ring Square With Round Flange (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Acn -1121N Or Equivalent In /Hindware/Kohlar 22 S&F In Repair Healthfaucet With 1Mtr Long Easy Flex Tube In Chrome Finish And Wall Hook Of 15 Mm Bore With Cp Pipe Complete Set Of Make -Jaquar Cat Part No Ald - 565 Or Equivalent In Parryware/Prayag 23 S&F In Repair Looking Mirror 5Mm Thick Size 3.5X3.5 Feet Incl Stud And Fastners Complete All As Specified And Directed. 24 S&F In Double Arm Wall Mounted Reversible Plain/Magnifying (X3) Pivotal Mirror All As Specified. Jaquar Cat Part No Acn -1193N Or Equivalent In /Hindware/Kohlar 25 S&F In Repair Glass Shelf Corner With Bracket Of Size 225Mm X 225Mm Thickness Of Glass 6Mm) With Cp Brass Railing And Brass Screws.Make- Jaquar Cat Part No Acn -1173 Or Equivalent In /Hindware/Kohlar 26 S&F Grating Doom 125Mm Of Ptmt. 27 S & F In Repair Vitreous China Urinal Half Stall Type White (Excluding Flushing Cistern ) Including Waste Fitting, Waste Pipe Complete All As Specified.Make-Jaquar/Hindware/Kohlar 28 S&F Ms Work In Tubular/Pipe/Angle Sections For Frame Work For Roof, Vertical Poles, Rafters And Purlins Including Washer Etc Complete All As Directed. 29 S & F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall,Fixed With Self Tapping Screws As Specified. ( Design Of Sheet As Mangalore Tiles Pattern In Red Colour ). 30 S & F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall,Fixed With Self Tapping Screws As Specified. 31 M & L Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Incl Preparation Of New Surfaces Of Any Description Over 10 Cm Width Or Girth Complete All As Specified And As Directed. 32 M&L 25Mm Thick Factory Made Coloured Interlocking Designer Polished Floor Tiles (Ultra Pattern) Of Grade M-35 Of Shape And Size As Directed,And 100Mm X 100Mm Size Tiles Piece On Every Joint Of Tiles Flooring Laid Over & Including 20Mm Thick Screed Bed In Cement Mortar 1:4 Complete All As Specified And Directed . Note: Sample Shall Be Got Approved From Ge Before Commencement Of Work 33 S&F In Repair Stainless Steel Drapery Rod Of 20 Mm Inner Dia (In Lengths As Directed) Of & Including Decorative Finial At Both Ends And Pair Of S S Steel Brackets Fixed At Both Ends With Pvc Rawl Plug & Steel Screws On Walls/Beam, (Victorian Design)All As Specified & As Directed. Make -Sample Can Be Seen In The Office Of Engg-In-Charge For Checking And Quoting The Same 34 Demolition Of Cement Concrete Un -Reinforced In Ground Floors And Pavings N.Exc 15Cm Thickness Complete All As Specified. 35 M& L For 25Mm Thick Pcc 1:2:4 Type Bo Using 12.5 Mm Graded Stone Aggregate As In Floor Complete As Specified And Directed. 36 S & F 75 Mm Dia Pvc ( Swr ) Floor Trap, Plain With Grating Including Jointing With Solvent Cement Complete All As Specified. 37 S & F Floor Door Stopper Of Aluminium Alloy And Tongue, Anodised With Hard Drawn Steel Overall Length Of Cover Plate 140Mm.As In Repairs Complete All As Specified. 38 Dismantling Of Wall And Ceiling Board(Fiblre, Pulp, Insulation Etc) Any Thickness Including Cover Fillets Complete All As Specified And As Directed. 39 S & F Powder Coated Aluminum Alloy Interlocking Snap Grid Frame Work For False Ceiling Size 600Mm X 600Mm Consists Of Main Tee Runners Of Size 38Mm X 38Mm X 1.5Mm And Cross Tee Of Size 38Mm X 38Mm X 1.5Mm, Spaced Between The Main Tee At 600Mm Centre To Centre To Form A Grid Of 600Mm X 600Mm Complete All As Specified And As Directed And As Per Manufacturer. Instruction. 40 M & L For 4Mm Thick Non Asbestos Fibre Cement Building Boards Of Make E Board Classic Designer Board (Cascade Or Occenic) Of M/S Everest Industries Ltd Or Equivalent As Approved, By Ge Fixed Or Laid/ Inserted To Timber/Gi/Aluminium Framework With Complete All As Specified And As Directed. 41 Taking Down Cement Mortar Plastering On Brick Or Stone Walls, Etc. Including Raking Out Joints,Hacking For Key,Scrubbing Down With Water, Etc Complete All As Specified And As Directed. 42 M&L For Rendering 15Mm (In Two Layers 10Mm+5Mm) Thick Plaster In Cm (1:4) On Faces Of Brick Work Or Concrete Surfaces, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 43 M&L For Rendering 5Mm Thick Plaster In Cm (1:3) On Faces Of Brick Work Or Concrete On Surfaces Of Ceiling, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 44 Complete Removal Of Existing Treatment Including Washing Rubbing Down And Stopping Of Painted Surfaces And Applying 1-2 Mm Thick Metallic Texture Painting (Top Quality) On Walls In Any Colour/Shade/Pattern/Design Including Preperatory Work For Base By Applying Primer/Putty Coat By Any Authorised Applicator Complete All As Specified And Directed 45 M&L For New Plaster Surfaces And Applying 1-2 Mm Thick Metallic Texture Painting (Top Quality) On Walls In Any Colour/Shade/Pattern/Design Including Preperatory Work For Base By Applying Primer/Putty Coat By Any Authorised Applicator Complete All As Specified And Directed 46 M&L For Preparing New Plastered Or Unplastered Surfaces Of Ceiling, And Applying Three Coats Of White Wash Complete All As Specified And Directed. 47 M & L For Cement Concrete As Pcc 1:5:10 Type E-2 Using (40Mm Graded Stone Aggregate) As Foundations,Filling And Mass Concrete Complete All As Specified. 48 M&L For 75 Mm Thick Pcc 1:3:6 Type C-1 (Using 20Mm Graded Stone Aggregate) As In Plinth Protection/Floors Complete All As Specified And Directed. 49 Demolition Of Brick Work Or Stone/Boulder Masonary, Laid In Cement Mortar Or Cement Lime Mortar Complete All As Specified. 50 M&L Brick Work, Straight Or Curved On Plan N.Exc 6M Mean Radius In Cm 1:6 Using Old Size Brick Complete All As Specified. 51 Taking Down Chowkat Or Frame With Shutters (With Out Taking Off Shutter From The Frame ) Not Exceeding 1.5 Sqm Each As Directed By Engineer-In-Charge. 52 S&F For Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Door Frames/Chowkhat Comprising Of 100 Mm X 65 Mm Size, Applying Pvc Solvent Cement And Screwed With Full Body Threaded, Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg/Cum And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/Moisture Proof And Fire Retardant And Fixed In Position With Mild Steel Hold Fast/Lugs/Ss Dash Fasteners Of Required Dia And Length Complete All As Specified And As Directed By Engr-In-Charge. 53 S&F 28-30 Mm Thick Moulded Wpc Factory Made 100% Solid Door (Conforming As Per Is-4020) Made From 100% Lead Free Single Extruded With 2, 4 Or 6 Raised Panel Design On The Front Side With 10 Mm Deep Mould On Single Side With Wood Grain Texture And Back Side Palin With Density Not Less Than 600 Kg/Cum. Manufactured By An Iso : 9001-2015 Certified Company. The Door Should Be Water Proof, Termite Proof, Fire Etardant And Having Screw Holding Capacity Complete All As Specified 54 S&F Stainless Steel (304 Grade) Finished Butt Hinges 125Mm Complete All As Specified And Directed 55 S & F Extruded Brass Handles, Fabricated Type Polished 150 Mm Complete All As Specified. 56 S & F Brass , Barrel Tower Bolts, With Cast Or Sheet Barrel And Rolled Or Cast Bolts And Fixed 200 Mm Complete All As Specified. 57 M&L For 250Mm Long Brass, Sliding Door Bolt Withsand Or Die-Cast Brass Hasp, Staple (Bolt Type) And Fixing Bolt With Rolled Or Drawn Brass Bolts And Fixed Complete All As Specified And As Directed. 58 Dismantling Pvc Pipes With Fittings Upto 75Mm To 110Mm Dia Complete All As Specified And Directed By Engr-In Charge.. 59 S&F For Pvc (Swr) Pipe 110 Mm Dia Single Socketed In Any Length With Rubber Ring Jointed Level Fixed To Walls Complete All As Specified And As Directed. 60 S&F For Pvc (Swr) Pipe 75 Mm Dia Single Socketed In Any Length With Rubber Ring Jointed Level Fixed To Walls Complete All As Specified And As Directed. 61 S&F For Pvc (Swr) Bends With Access Door 110 Mm Dia Complete All As Specified And As Directed. 62 All As Per Item No 61 Above But 75 Mm Dia. 63 S&F Pvc (Swr) Plain Bend 110 Mm Dia Complete All As Specified And As Directed. 64 S&F Pvc (Swr) Plain Bend 75 Mm Dia Complete All As Specified And As Directed. 65 S&F Pvc (Swr) Branch Piece Single Or Double T Equal Or Unequal With Access Door 110 Mm Dia Complete All As Specified And As Directed. 66 All As Per Item No 65 But 75 Mm Dia. 67 S&F Pvc (Swr) Vent Cowl 110 Mm Dia Complete All As Specified And As Directed. 68 Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering, And Removing Surplus Soil To A Distance N Exc 50 M And Making Good Surface 69 M&L For Cutting Chases, Pinning In, Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc. And Making Good, Cutting Not Exc 10 Cm Girth All As Specified. 70 Taking Down Carefully Existing Points Wiring On Surface Conduit/Concealed Conduit Including Conduit From Surface And Expect Conduit In Concealed Wiring For Light/Fan/Socket/Power/Bell From Wall & Roof Along With Fitting And Fixtures Such As Switches, Sockets, Ceiling Roses, Batten Holders, Unserviceable Light Fittings, Pieces Of Wires, Gutties, Conduit, Wooden Boards Etc Removing Materials To Store For Keeping In Safe Custody Of Contractor For Which The Credit Has Been Considered Under Schedule Of Credit And Making Good The Disturbed Portion Of All Floor, Ceiling Etc All As Specified And Directed. 71 M & L For Point Wiring With 1.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Conductor For One Light/Fan/Bell Point In And Including New Pvc Rigid Non Metallic Concealed Conduit 19/20 Mm Dia, Medium Duty, Isi Marked To Be Terminated In Pressed Steel Terminal Boxes With Pvc Modular Top Cover Plates Of Suitable Size For Mounting Of Modular Type Switches/Sockets/Regulators Including 1.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Earth Continuity Conductor Controlled By One Switch And/Or One Regulator Complete Including Cutting Chases And Making Good The Surfaces In Cm 1:3 And Finishing The Surface As Per Existing Treatment All As Specified And Directed By Engr-In-Charge.Notes: (I) Cost Of Pressed Steel Terminal Boxes And Modular Top Cover Plate Shall Be Included In Point Wiring. (Ii) Wiring Shall Be Done As Per Colour Code In Is For Phase, Neutral And Earth.(Iii) -Cost Of Eye/Bottle Thimbles Used For Connection In Switches/Sockets & Mcbs In Dbs Shall Deemed To Be Included In The Unit Rate Quoted For This Item. 72 All As Per Sl Item No 71.00 Above Herein Before But One Socket Out Let 5 Pins 5 Amp On The Same Board With Other Switches Complete All As Specified And Directed. 73 All As Per Sl Item No 71.00 Above Herein Before But For One Socket Out Let 5 Pins 5 Amp On Independent Board Complete All As Specified And Directed. 74 All As Per Item No71.00 Herein Before But 2.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Conductor Incl 2.5 Sqmm Pvc Insulated And Unsheathed Frlsh Copper Earth Wire For Switch Socket Combination 3 Pin 15 Amps On Independent Board. 75 S & F In Replacement Of Modular Switch 1 Way, 6 Amps, 1 Module, 230 Volts Complete All As Specified. 76 S & F In Replacement Of Modular Switch 1 Way, 16 Amps, 1 Module, 230 Volts Complete All As Specified. 77 S & F In Replacement Of Modular Socket 5 Pin 6 Amps, 2 Module 230 Volts Complete All As Specified. 78 S & F In Replacement Of Modular Socket 5 Pin 6 &16 Amps, Combination Type 2 Module Complete All As Specified. 79 S & F In Replacement Of Modular Fan Regulator Step Type, 120 Watts, 2 Module Complete Fixed As In Repair All As Specified. 80 S & F In Replacement Of Ceiling Rose Surface Bakelite Surface 65 X 50Mm 3 Terminals All As Specified & Directed 81 Supply And Fix Incl Taking Down Deco Mini Energy Efficient 0.5 Watt B22 Base Led Bulb Green Colour With Colour Temperature 6500 Kelvin, Controller Type Push Button , Globe Shape For Indoor/ Outdoor Usage All As Specified And Directed By Engr In Charge. 82 Supply And Fix Incl Taking Down Deco Mini Energy Efficient 0.5 Watt B22 Base Led Bulb Red Colour With Colour Temperature 6500 Kelvin, Controller Type Push Button , Globe Shape For Indoor/ Outdoor Usage All As Specified And Directed By Engr In Charge. 83 Supply And Fix Surface/Recess Mounted Led Luminaire 36 Watt Cool White 4000-5000K Suitable For Gridd Celling Cutout Dimensions: 2X2 Ft. Incl Connecting With Twin Core Copper Wire From Ceiling Rose To Fitting, Fixture Size: (Lxwxh) In (595X595X65) Mm Incl Lamp And Driver All As Specified & Directed. 84 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 18/20W 6500K Of Capacity ,20 Watt,4 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 85 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 9/10W 6500K Of Capacity ,10 Watt,2 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 86 Supply And Fix Mirror Light With Linear & Compact 12 W Mirror Light With Decorative Grey End Caps, Polycarbonate Body And Ribbed Opal Diffuser Of Capacity 9 Watt Complete All As Specified And Directed By Engr-In-Charge. 87 M & L For Sub Main Wiring With Two Single Core 4.0 Sqmm Pvc Insulated And Unsheathed Frlsh ,Stranded Copper Conductor Cable Drawn Through Pvc Concealed Conduit 25 Mm Dia Including 4 Sqmm Pvc Insulated Unsheathed Frlsh Stranded Copper Conductor Cable As Earth Wire All As Specified And Directed By Engineer-In-Charge. Note 1:- 2 Runs Of 4.00 Sqmm Copper Conductor Cable, 1 Run Of Pvc Conduit & 1 Run Of 4.00 Sqm Copper Conductor Earth Wire Shall Be Measured As One Unit) Note2 : Rate Quoted For This Items Shall Be Inclusive Of The Cost Of (I) Rigid Non-Metallic Pvc Conduit Of 25 Mm Dia With Tees, Bends, Elbows, Reducers, Bell Mouth Tube Ends And Fixing Accessories Such As Couplers, Lock Nuts, Saddles, Pipe Hooks Etc. (Ii) Cutting Chases, Pinning In Making Good To Facing Where Required And Pointing In Cement Mortar 1:3 To Match The Existing Surfaces, Cutting Not Exc. 10 Cm Girth . (Iii) Taking Out/Down Existing Unserviceable Sub Main Wiring. 88 Taking Down And Refixing Of Ceiling Fan After Supply And Replacement Of Rubber Reel, Round Cover Plate Of Size 6 Inch Of Ceiling Fan Complete With Ms Split Clamp Two Nos, Nuts And Bolts Complete All As Specified And Directed By Engr-In-Charge. 89 Supply And Fix Exhaust Fan Ac Single Phase 230/240 V Of Size 250 Mm Sweep 900 Rpm Engineering Thermoplastic Body, High Efficiency Motor, Dynamically Balanced Blade For Better Performance And Corrosion-Resistant Powder Coated Metallic Finish Including Louver Complete All As Specified And Directed By Engineer-In-Charge. 90 Material And Labour For Making Hole Of Suitable Size For Exhaust Fan 250 Mm/ 300Mm Sweep In Wall For Grouting And Making Good The Surface Complete All As Specified And Directed By Engr-In-Charge. 91 Supply And Fixing Single Pole And Neutral Enclosure With A Two Pin And Earth Plug And Socket Complete With Mcb Spn 32 Amps, Complete All As Specified And As Directed By Engineer-In-Charge. 92 S&F Poly Coated Gi Frame Work As In Grid For False Ceiling Comprising Of Protected Gi Perimeter Channel 0.55 Mm Thick With Two Unequal Flanges Of 20 And 30Mm And Web Of 27Mm Fixed To Surrounding Wall Using Nylon Sleves And Screws At 450Mm Centre To Centre/Intermediate Chaqnnel 0.9Mm Thick Having To Equal Flanges Of 15Mm Each And Web Of 45 Mm Suspended From Soffit And Approx 900Mm Centre To Centre With Gi Cleat And Steel Expansion Fasterners With And Including Ceiling Section (Not Exc 1.2 Metre Length) Of 0.55Mm Thickness Having Kurled Web Of 50Mm And Flange Of 26Mm Each With Lips Of 10.5Mm Fixed To The Intermediate Channel With Connecting Clips Acorss The Intermediate Channel At 457Mm Centre To Centre And Hangers 6Mm Dia Gi (Upto 1200 Mm Length Adjusting Level Fixed To Roof Slabs By Means Of Ceiling Cleats Made Out Of Gi Flat 40 X3Mm Size 60Mm Long Complete With And Including 7Mm Thick Pvc Laminated Gypsum Tiles Of Size 595X595Mm Complete All As Specified & Directed 93 M&L For Complete Removal Of Existing Surfaces Of Walls Including Cornices, Pillasters Etc, And Applying Two Coats Of Obd Over And Incl A Coat Of Interior Wall Primer Over Wall Care Putty Complete All As Specified And Directed. 94 M&L For Complete Removal Of Existing Treatment On Walls And Applying 02 Coats Of Exterior Weather Emulsion Paint To External Walls/Rcc Surfaces/Soffits Of Chajjas/Roof Projections/Cantilevers/Balcony Etc Surfaces Over & Including A Coat Of Exterior Wall Primer And Over Wall Care Putty Complete All As Specified. 95 S&F Stainless Steel Tubing Of 25 Mm Dia Chromium Plated Min. 1.0 Mm Wall Thickness As In Curtain Rod Complete Incl S&F 02 Nos Stainless Steel Brackets/Finials Fency Type, Stops Fixed With Ss Screws Etc All As Specified & Directed.Note : For The Purpose Of Mesurement And Payment Running Length Of Curtain Rod Only Shall Be Considered. 96 Taking Down Chowkhats Or Frames Of Any Description Exc 1.5 Sqm And N. Exc. 4 Sqm Each (Without Taking Off Shutters From The Frame) Including Cutting Hole To Size For Receive Fresh Pcc Of Hold Fast And Making Good The Disturbed Surface Same Complete All As Specified And Directed. 97 S&F Factory Made Pressed Steel Frames Made Of Ms Sheet Of 1.20 Mm Thickness For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete As Specified,Size 125X60Mm 98 M&L Pcc 1:3:6 Type C-0 In 12.5 Mm Graded Stone Aggregates Hold Fast Fillinng Inside Frame & Hold Fasts Etc Complete All As Specified 99 S&F Factory Made Flush Shutters 35Mm Thick Ply Construction, Bwp Confirming To Is 2202, Solid Core Construction, With Block Board Core And Plywood Face Panels Commercial Type On Both Sides With 6Mm Thick Lipping Frame To Match Including Supply And Fixing Following Items :(A) Mild Steel Butt Hinges 125Mm - 3 Nos. Per Leaf(B) Stainless Steel (304 Grade) Finished Tower Bolt 200Mm Long - 2 Nos Per Leaf(C) Stainless Steel (304 Grade) Finished Handles 150 Mm - 2 Nos. Per Leaf(D) Stainless Steel (804 Grade) Finished Sliding Bolt 250 Mm - 1 No. Per Leaf(E) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos. Per Leaf. 100 S&F 35Mm Thick Glazed And Skelton Shutters Of 2Nd Class Hard Wood (Factory Made) Open Rebated And Divided To Receive Glass, Gauze Etc (Without Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc Size Of Members Of Shutter As Specified In Ssr-91 Pt-1 Section 8 Clause 8.20(A), Kiln Seasoned And Chemically Pressure Treated All As Specified Including Stainless Steel 304 Grade Wire Cloth (0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm) All As Specified And Including Supply And Fixing Following Items :(A) Stainless Steel (304 Grade) Finished Butt Hinges 125Mm - 3 Nos Per Leaf(B) Stainless Steel (304 Grade) Finished Tower Bolt 200Mm Long - 2 Nos Per Leaf(C) Stainless Steel (304 Grade) Finished Handles 150 Mm - 2 Nos Per Leaf(D) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16X250Mm - 1 No Per Leaf (E) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos. Per Leaf. 101 M&L For Two Coat Of Synthetic Enamel Paint (Finishing Coat) Over One Coat Of Pink Primer To New Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Incl Prepration Of Surfaces Complete All As Specified And Directed. 102 S&F 300Mm, Ordinary Rat Tail Rod Pattern Springs Including Roller And Roller Plate Complete All As Specified And Directed. 103 S & F In Replacement Of Ceiling Rose Surface Bakelite Surface 65 X 50Mm 3 Terminals All As Specified & Directed 104 S & F In Replacement Of New Generation Energy Saving And Environmental Friendly Long Life Led Building Security Light 1X35 Watts Made Up Of Pressure Die Cast Alluminium Housing With High Power Led As Light Source And Lense Embedded Pc Cover Having Top Opening Separate Driver Compartment With Ip65 Protection And Impact Resistance Of Ik07, With All Accessories Including Suitable Bracket With 32Mm Bore Light Grade Gi Pipe Bemd To Shape, Including Ms Clamp Of Size Of Required Size And Pvc Cable 1.5 Sqmm Twincore From Ceiling Rose To Light Fittings Complete All As Specified And Directed By Engineer-In-Charge. 105 S & F In Replacement Of Surface Mounted Led Bulk Head Luminaire Of Capacity 10 Watt With Abs Body & Polycarbonate Diffuser, Ip54 Inc Connection With ,With Flexible Wire 0.5 Sqmm Copper Cable All As Specified & Directed By Engr-In-Charge. 106 Supply And Fix Lamp Holder Including Led Bulb 9 W Including Flexible Wire 0.5 Sqmm Copper Cable All As Specified & Directed By Engr-In-Charge. 107 M & L For Sub Main Wiring With Two Single Core 6.0 Sqmm Pvc Insulated And Unsheathed Frlsh ,Stranded Copper Conductor Cable Drawn Through Pvc Concealed Conduit 25 Mm Dia Including 6.0 Sqmm Pvc Insulated Unsheathed Frlsh Stranded Copper Conductor Cable As Earth Wire All As Specified And Directed By Engineer-In-Charge. Note 1:- 2(Two) Runs Of 6.00 Sqmm Copper Conductor Cable, 1 Run Of Pvc Conduit & 1 Run Of 6.00 Sqmm Copper Conductor Earth Wire Shall Be Measured As One Unit) Note 2 :(I) Rate Quoted For This Items Shall Be Inclusive Of The Cost Of (I) Rigid Non-Metallic Pvc Conduit Of 25 Mm Dia With Tees, Elbows, Reducers, Bell Mouth Tube Ends And Fixing Accessories Such As Couplers, Lock Nuts, Saddles, Pipe Hooks Etc. (Ii) Cutting Chases, Pinning In Making Good To Facing Where Required And Pointing In Cement Mortar 1:3 To Match The Existing Surfaces And Cutting Not Exc. 10 Cm Girth . (Iii) Including Taking Out/Down Existing Unserviceable Sub Main Wiring. 108 S & F In Replacement Of Sheet Metal Enclosure Db Tpn 4 Ways Double Door 415 Volts With 200 Amps Standard Bus Bar Of Suitable Size And Common Neutral Link Flush Mounting Type, Drilling Holes For Incoming And Out Going Cables Complete With Ip-43 Protection Complete All As Specified And Directed By Engr-In-Charge 109 S & F In Replacement Of Mcb, Triple Pole & Neutral (Tpn) 10 Ka 240 Volts 40 To 63 Amp Capacity Fixing In Db’S Complete All As Specified And Directed. (Note: Mcb Should Be B Or C Curve As Directed By Engineer In Charge) 110 Supply And Fix In Replacement Of Sheet Metal Enclosure 8 Ways Double Door For Dbs When Mcbs Are To Be Used 240,Volts Including 200 Amps Standard Bus Bar Of Suitable Size And Common Neutral Link All Flush Mounting Type, Drilling Holes For Incoming And Out Going Cables With Ip43 Protection Complete All As Specified & Directed By Engr-In-Charge. 111 S & F In Replacement Of Mcb, Single Pole 240 Volts 6 To 32 Amp Capacity For Fixing In Db’S Including Proper Thimble Connections Complete All As Specified And Directed By Engineer-In-Charge. 112 Supply And Fix In Replacement Of Mcb , Spn, 240 Volts ,40-63 Amp For Fixing In Dbs Of Including Proper Thimble Connections Complete All As Specified And Directed By Engineer-In-Charge. 113 M & L In Replacement Of Unsv Earthing Complete With Galvanized Iron Earth Plate Electrode Of Size 600X600X6.0Mm , Buried Directly In Ground (Earth Pit Not Less Than 2.25 Mtrs Below Normal Ground Level) With Top Edge Of Earth Plate Not Less Than 1.5 Mtr Below Normal Ground Level, Connected To Galvanized Earth Lead Wire 4.0 Mm Dia By Means Of Bolts , Nuts , Check Nuts And Galvanized Iron Or Steel Including Earth Work In Any Type Of Soil, Charcoal Salt 15 Cm Around The Earth Plate 20 Mm Dia Watering Pipe Medium Grade 1.70 Mtr Long With A Plug At Top, Gi Protection Pipe Light Grade 15 Mm Dia From Earth Pit To Main Board Including Pcc Pit In Cement Concrete 1:2:4 Along With Ci Frame And Cover 10Mm Thick Duly Hinged To Ci Frame As Shown In The Electrical Plate No3 Of Ssr 2009 Part 1 Specification At Page 497. 114 Xlpe Insulated ,Screened, Pvc Bedded, Galvanized Steel Wire Armoured, Electric Power Cables (Heavy Duty) 1100 Volts Grade With Stranded Aluminium Conductor Of Size 25 Sq Mm 4 Core Supplied & Laid In Replacement Complete All As Specified& Directed By Engineer-In-Charge. 115 Excavation In Trenches Not Exceeding 1.5 Mtr Wide And Not Exceeding 1.5 Mtr In Depth For Laying Of Cables Including Getting Out In Any Kind Of Soil Complete All As Specified And Directed. 116 Returning Filling In Including Spreading, Levelling, And Well Ramming, In Layers Not Exceeding 25 Cm Each Layer Of Any Kind Of Soil. 117 Removing Surplus Excavated Material From Site Not Exceeding 50 Mtrs From Starting Point And Depositing Where Directed At Level Not Exceeding 1.5 Mtr Above The Starting Point. 118 Material And Labour For Sand Cushioning For Cables 8 Cm Below The Cable And 15 Cm Above With Dry River Sand In Trenches For Cushioning Of Underground Cable Line Including Spreading, Leveling, Well Ramming Completed All As Specified And Directed. 119 Cutting Of Hardstanding Floor/Wall For Laying Of Cable Including Matching With Suface By Using Cement Concrete All As Specified And Directed. 120 Supplying & Laying Factory Made Unreinforced Precast Concrete Cable Covers Class Lv Type 1, Flat, Size 250X150X40Mm Laid In Trenches As Protection To Cables Complete All As Directed By Engr-In-Charge 121 Material And Labour For Replacement Of Gi Tubing Light Grade 40 Mm Bore For Passing Through Cables Under The Floor ,Along The Wall Or Along The Pole Complete All As Specified And Directed. 122 Dismantling Of Stone Slab And Tiles Laid Bedded And Pointed In Any Mortar Description Or Thickness In Floors, Apron Etc Complete All As Specified. 123 M & L For Screed Bed Or Bedding Layer Of Mortar 15 Mm Thick In Cm 1:6 For Laying Floor Finishes Complete All As Specified. 124 M&L For Virified Ceramic Light Shade Tiles 8 - 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc,Over & Including 15 Mm Thick Screed In Cement Mortar (1:4) Over And Epoxy Cartridge Tile Grout Using Fill The Joint Of Tiles Complete All As Specified.Note- Epoxy Black,Golden Colour. 125 All As Per Item No 124 But As A Skirting Incl. 10Mm Thick Rendering As In Back Coat Complete All As Specified. 126 M&L For 7 To 8 Mm Ant-Skid Ceramic Joint Free Premium Quality Coloured Tiles Area Of Each Tile Esc 0.06 Spm But Next 0.11Sqm, As In Floors Etc. In Any Pattern Ghe & Dark Tiles As Approved, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match, In Floors Etc. Over & Including 15 Mm Thick Screed In Cement Mortar (1:4) Over And Pointed In White Cement With Pigment To Match The Colour Of Tiles Complete All As Specified. 127 M & L For Machine Cut Cudappa Stone Slab 20 - 25 Mm Thick Laid Over Cement Screed Base 15Mm Thick In Cm 1:6 And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete All As Specified. 128 Rounding To Edges Of Stone Slabs One Edge, Such As In Steps, Cooking Platform, And Other Similar Situations All As Specified. 129 Dismantling Water Tanks And Removing To Store Of Capacity Exc 500 & Not Exc 1000 Ltrs Complete All As Specified. 130 Supply And And Fixing, Hoisting Pvc Tank Of 1000 Ltr Capacity Including Supplied And Fixed 20Mm Dia Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe And Fixed.(Minimum Weight 15Mm-142 Gms/20Mm-210Gms/25Mm-455 Gms/40Mm-690 Gms Float Valve Assembly Complete All As Specified And Directed. 131 S&F In Repair Wall Mixture Mixing Valves Incl. Three Joints To Steel Pipes Or Unions 15 Mm Bore Fancy Type Best Quality As Per Sample Approved By Ge Make-Jaquar Cat Part No Qqp-7217Pm Or Equivalent In Hindware/Kohlar. 132 S&F Pvc Cabinet 600X450Mm Overall Size With Looking Mirror Of Selected Qality Glass Mountedover Pvc Framing As Per Sample Complete Fixed In Repair Complete All As Specified. 133 S&F Stainless Steel Plate Rack Of Size Not Less Than 90Cmx75Cm(Wt N. Less Than 4 Kg) Fixed With Stainless Steel Screw Including Taking Out Old Unserviceable Wooden Plate Rack As Approved By Ge Complete All As Specified. 134 S&F In Repairs Chromium Plated Shower Roses With Swivel Joints 125 Mm Dia Size Incl Fixing To Gi Pipe/Union Fixed Make-Jaquar /Hindware/Kohlar. 135 M & L For Rendering 15 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:6 Finished Even And Smooth ( Without Using Extra Cement ) With Sagol Finish On Plastered Surface Complete All As Specified And As Directed. 136 M&L For Preparation Of New Decorated Plastered Or Unplastered Surfaces Of Walls And Applying Two Coats Of Exterior Emulsion Over One Coat Of Primer And Over 2Mm Thick Putty For Levelling And Smoothening, Complete All As Specified And Directed. 137 M&L Preparation Of New Plastered Surface Of Walls And Applying Two Coats Of Oil Bound Distemper Over 1.5Mm Thick Wall Care Putty Complete All As Specified And Directed. 138 M&L For Preparing New Plastered Or Unplastered Surfaces Of Ceiling, And Applying Three Coats Of White Wash Complete All As Specified And Directed. 139 S&F Sinks With Drainage Board Made Of Stainless Steel Lmm Thickkitchen Or Laboratory With Plugs,Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X 460Mm Bowl Size 410Mm X 330Mm X 160Mm Complete All As Specified And Directed. 140 S&F In Repair Brass Chromium Plated Sink Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe Of 15Mm Bore All As Specified And As Directed. Make: Jaquar /Hindware/Kohlar 141 S&F Powder Coated Anodised Aluminium Frame For Doors, Windows Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc. Complete All As Specified And Directed. 142 S&F Frosted Glass 4.00Mm Thick Ordinary Quality And Glazing With Oil Putty In Square N.Exc 0.50Sqm In Each Panes Complete All As Specified And Directed. 143 S&F 28-30 Mm Thick Moulded Wpc Factory Made 100% Sketon/Glased Door (Conforming As Per Is-4020) Made From 100% Lead Free Single Extruded With 2, 4 Or 6 Raised Panel Design On The Front Side With 10 Mm Deep Mould On Single Side With Wood Grain Texture And Back Side Palin With Density Not Less Than 600 Kg/Cum. Manufactured By An Iso : 9001-2015 Certified Company. The Door Should Be Water Proof, Termite Proof, Fire Etardant And Having Screw Holding Capacity Complete All As Specified 144 S&F Factory Made Wpc Extruded Board Cnc Machine Cut Jali Fixed To Skelton Door As Per Approved Design Complete All As Specified And Directed 145 S&F Kitchen Cabinets Including All Fittings And Fixtures Incl The Follwing. (A) 19Mm Thick Plywood Of Commercial Block Board,Make: Kitply/Century Ply/ Green Ply(B) 1Mm Thick Commerical Lamination On Both Side Fixed To Black Board(Colour And Design As Approved)(C) Ss Pullout Basket Ss Finish Of Plain 15 X 20 X 6 (D) D Type Handle 100Mm Ss Finish(E) Pullout Basket Ss Finish Cutlery Wire Of Size 15X20X4 (F) 2Nd Class Hard As In Frame Work(G)Ss Channels For Pullout Basket As Required. (Note:- The Measurement Shall Be Taken From Front Elevation And Not Girthwise. 146 S&F Factory Made Upvc Brown Colour Door Shutter Made Of Extruded Profile With Wall Thickness Of 2.3Mm(+-0.2Mm) Door Profile With Hollow Section With Multy Chamber. Frame (60X62Mm),Sash(42Mmx67Mm).Sliding Interlock(One Verticle Length In Each Shutter)(45.5Mmx28Mm).Glazing Bead(24.5Mmx16Mm)Will Be Mittred Cut And Fusion Welded At All Corner.Including Drilling Holes For Fixing Hardware And Drainge Of Water Etc Am,.Making Arrangement For Fixing Of Hardware.Epdm Gasket,1.2+0.2 Mm Thick Galvanised Steel Frame(30Mmx21.5Mm).Sash (30Mmx18Mm)Profile To Be Inserted In Required Profile.Frame Will Be Finshed To The Wall With 8Mmx100Mm Long Fasteners.Hardware Touch Lockof Zinc Alloyed(Brown Powder Coated)Steel Roller System Including 5Mm Thick Glazing With Selected Quality Glass ,Aluminium Track And Bottom Rail For Two Track Sliding Fram,Wool Pine For Sliding Sash And Interlock. Note.The Unit Rate Coated By Contractor Includes Cost Of Glass And All Other Conncted Accessories,Net Opening Will Be Measured For Purpose.Make:H2O Window,Fenesta,Anuplast As Approved By Ge. 147 M&L For Rcc 1:2:4 Type B-1 Using 20Mm Graded Crushed Stone Aggregate In Any Situation Except Foundation Complete All As Specified And Directed. 148 S&F 10Mm Dia And Above Tmt Bars Cut To Length, Bend To Shape As Required Including Cranking, Hooking Ends & Binding With Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Complete All As Specified And Directd. 149 All As Item No 77 Here In Before But 5Mm Dia And Over Upto & Including 10Mm Dia In Stirrups, Spaces & Binder Complete All As Specified And Directd. 150 S & F Powder Coated Aluminium Window/Ventilator Shutters, Side Hung Type With Sash Bars, Including Necessay Joinery Cleats, Glazing Clips, Rubber Packing, Chowkats Aluminium Snap Beading, Screws, Suitable Handle Etc With And Including Sheet Glass Or Ordinary Glazing Quality Of 4Mm Thick And Incl Gi Wire Mesh 0.56 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18 Mm , Size Of Side Rails , Top Rails , Bottom Rail 85X44.5Mm And Size Of Chowkat Frame 101.6X44.45Mm And Thickness Of Aluminium Member Shall Be 1.40Mm Thick Complete All As Specified. 151 S&F For Prelaminated Particle Board 18/19 Mm Interior Grade Prelaminated On One Side With Decorative Choice Lamination And Other Side Balancing White Lamination Fixed With Screw Timber Frame Work Including Dismantling Board All As Specified. 152 S&F In Repair Continuous (Paino) Hinges, Mild Steel, Bright Finish Or Electrogalvanised Width Of Flap (When Open) In 40Mm All As Specified. 153 S&F In Repair 40Mm Dia, Cupboard Knobs Fixed With Nut, Screw And Washer Of Mild Steel Bright Finished All As Specified. 154 S&F Ball Catches With 8Mm Dia Steel Ball And Brass Body And Striking Plate Including Letting In And Fixing Complete All As Specified. 155 Supply & Fix In Replacement Of Modular Bell Push Switch 1 Way, 6 Amps, 1 Module Complete All As Specified. 156 Supply & Fix In Replacement Of Call Bell Ding Dong Ac 230 Volt Single Pole Complete All As Specified. 157 Supply And Fix Exhaust Fan Ac Single Phase 230/240 V Of Size 300 Mm Sweep 900 Rpm Metal Body, High Efficiency Motor, Dynamically Balanced Blade For Better Performance And Corrosion-Resistant Powder Coated Metallic Finish Including Hole Making Louver Complete All As Specified And Directed By Engineer-In-Charge. 158 S & F Modern Energy Efficient Bedroom Muziris Wall Decorative Light Of Capacity 20 Watt Single Headed 240 Volt, Ip20 Rating, Controller Type (Push Button), Product Weight 1.04 Kg, Body Material (Metal), Power Source (Corded Electric),Lamp Base E27, Colour(Bronze) Incl Electrically Connection , Including Removing Of Unserviceable Decorative Light Fittings Of Any Description Complete All As Specified And Directed By Engr-In-Charge. Make: Philips Model No 31425 Or As Equivalent. 159 Excavating In Trenches N Exc 1.50M In Width And N Exc 1.50M In Depth For Foundation, Manholes Etc As Well As N Exc 10 Sqm On Plan Area And Getting Out In Soft/Loose Soil All As Specified And Directed. 160 M&L For Pcc 1:5:10 Type E-2, Using 40Mm Graded Crushed Stone Aggregate In Foundation, Filling And Mass Concrete All As Specified And Directed. 161 M&L For Broken Stone Hard Core Of Gauge N. Exc 63Mm, Deposited, Spread And Levelled In Layers N Exc 15Cm Thick, Watered And Rammed To A True Surface All As Specified And Directed. 162 S&F Mild Steel Deformed Bars, 6Mm To 8Mm Dia Cut To Length, Bent To Shape Required Including Cranking And Binding With & Including Mild Steel Wire (Annealed) Not Less Than 0-.90Mm Dia Complete. 163 M&L For Form Work To Soffits Of Suspended Slabs Such As Roof Slabs Etc For Rough Finished Concrete Surface Complete All As Specified And Directed. 164 M&L For Form Work To Sides For Slabs And Sides Of Rcc/Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exc 10 Cm But N Exc 20 Cm Wide For Fair Finished Concrete Surface Complete All As Specified And Directed. 165 Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams And Similar Work, Vertical Or To Batter For Rough Finished Flat Surfaces Of Concrete. 166 Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions, Square, Rectangular Or Polygonal For Rough Finished Flat Surfaces Of Concrete. 167 M&L For Rendering In Cement Mortar (1:6) 10 Mm Thick Finished Even Smooth Complete All As Specified On Brick Or Concrete Surface Of Fair Faces. 168 M&L 15Mm Thick Cement Plaster In Two Layer First Coat In Cm 1:6,10Cm Thick & Second Layer 5Mm Thick In Cm 1:4 Mixed With Wpc 3% By Weight Of Cement Including Finishing Fair & Even On Brick Or Concrete Surfaces Of Othern Than Fair Faces. 169 M&L For 5Mm Thick Cement Plastering To Rcc Surfaces In Cm :1:3) Finished Even And Smooth W/O Using Extra Cement On Ceiling Surfaces. 170 S&F Stainless Steel Butt Hinges Medium Weight Cold Rolled Isi Marked Of Size 100 Mm Complete All As Specified And Directed. 171 M&L For Ms Framed Guard Bars Conforming To Fe-410-0 Or Fe-310-0 Welded To Steel Windows/Ventilations Complete All As Specified And Directed. 172 S&F Vitrous China Squatting Pan Of Orissa Patterns Long Pan Size 580Mx440Mm White With P Or S Trap Front Of Back Inlet And Foot Rest Including Long Band Any Pattern (Excluding Flushing Cistern And Flush Pipe) Including Provision For Lime Concrete Bedding. 173 S&F Pvc Flushing Cistern Low Level 10 Ltr Cap With Inlet Ball Valve Float And Handle Syphonic Action Type Incl Brackets And Flush Pipe Of Polythene Of Low Or High Density Isi Marked. 174 S & F In Repairs Vitreous China Oval Shape Wash Basin, White, Flat Back, Size 580 X 450 Mm Excluding Taps, Waste, Chain And Plug And Porcelain Stopper But Including Brackets With 32 Mm Dia Waste Fittings, Brass, Chromium Plated With Waste Pipe Complete All As Specified. 175 S&F Looking Mirror Of Selected Quality Mounted On 6 Mm Thick Ply And Fixed To Wall With Wooden Plugs Chromium Plated Brass Screws And Washers. 176 S&F For Ci Floor Trap With Incl Jointing With Waste Pipe In Cement Mortar Of Size 100Mm. 177 S&F Gully Trap Stone Ware Square Of Round Mounted Type P Of Size 150X150Mm. 178 S&F 20Mm Dia Stop Valve Of Copper Alloy Screwed Down High Pressure With Crutch Or Butter Fly Handle Screwed On Both Ends For Iron Pipe Or For Union Fixed. 179 S&F Pvc Connection 15Mm Dia 600Mm Long Of Heavy Grade Screwed One End To Inlet Of Whb/Pillar Tap/Cistern Etc Complete Incl Brass Union Coupling On Both Ends Connfirming To Is-3076 Complete With Connector For Connection Old Water. 180 S& F For Ci Pipe 75Mm Dia Laid In Floor In Any Length With Or Without Cars With Cement Joint (Waste & Vent Pipe). 181 All As Per Item No 38 Here In Before But 100Mm Dia. 182 S&F For Ci Bend Any Radius Disminshing Pieces Or Tyes Of 100Mm Bore With Ducks For Or Head Rest. 183 S&F For Ci Branch Pieces Single Equal Or Unequal Ordinary Or Inverted Or With Paralled Brnach 100 Mm Bore. 184 S&F Cast Iron Sand Cast Pipe 100 Mm Dia With Or Without Cars With Cement Joint Fixed To Walls. 185 S&F Cast Iron 100 Mm Cowl. 186 M&L For Pcc 1:4:8 Type D-2 Using 40Mm Graded Stone Aggregate)75Mm Thick On In Sub Base Of Fllor .. 187 M&L For 15Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And Directd. 188 M&L For Coloured Glazed Ceramic Tiles On Vertical Surface (300Mmx600Mx7M) Thick Set And Jointed In Neat Cement Slurry And Pointed With White Cement To Match Complete All As Specified And Directd. 189 M&L For Coloured Non Skid Ceramic(300X300Mm) Tiles 7 To 8Mm Thick As In Floor Set And Jointed In Neat Cement Slurry And Pointed With White Cement To Match Complete All As Specified And Directd. 190 S&F Steel Ventilation With Top Hung Shutter Including Hinges, Steel Peg Stay Complete. 191 S&F 4Mm Thick Sheet Glass Of Figured,Pin Headed And Glazing With Oil Putty In Square N Exc 0.50 Sqm In Each. 192 M&L For Preparation Of Newly Steel Surfaces And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Over 10 Cm Width Or Girth Complete All As Specified And Directd. 193 M&L For Preparation Of Newly Plastered Surfaces And Applying Two Coats Of Cement Base Paint Over A Coat Of Chalk Whiting Complete All As Specified And Directd. 194 M&L For Three Coats Of White Wash On Wall Of Newly Plastered Surface. 195 S&F For Preparation Of Newly Plastered Surfaces And Applying Three Coats Of White Wash On Ceiling. 196 M & L For Factory Made Solid Pvc Door Frame Of Size 50 Mm X 47 Mm Made Out Of 5 Mm Plain Colour Pvc Sheet Reinforced With M.S Square Tube, Supplying & Fixing In Opening As Per Specification & Drawing Complete All As Specified And As Directed. 197 S&F Factory Made Solid Pvc Moulded Door Shutter, With Particle Board Core, 28 To 30Mm Thick (Stiles), With 2, 4, Or 6 Raised Panel Design With 2Mm Thick Moulded Pvc Sheet On The Front Face & 2Mm Plain Colour Pvc Sheet On Back Face & 5Mm Thick Plain Colour Pvc Sheet On Back Face, Supplying & Fixing In Frame At Site As Per Specification & Drawing All As Specified. 198 S&F Aluminium Tower Bolt 150Mm Long Stove Enamelled Black With Bright Bolt & Fixed. 199 S&F Aluminium Sliding Door Bolt With Hasp And Staples Type Bolt Type , 300Mm Long Stove Enamelled And Fixing Clips Of Sheet Cast Or Extruded Section Or Cast Aluminium Alloy And Fixed All As Specified. 200 S&F Aluminium Alloy Handle Of 100M Size Oval Type Stove Enamelled & Fixed All As Specified. 201 M&L For Rendering 10Mm Thick Cm (1:4) On Roof Slab Top, Mixed With Water Proofing Liquid Finished Even And Fair Without Using Extra Cement Complete All As Specified. Note: Water Proofing Liquid Shall Be Measured And Paid Separately. 202 M & L For Cleaning The Newly Plastered Surfaces Of Concrete ( Roof Etc) With Wire Brushes And Applying Water Proofing Treatment As Under :-I) Apply One Coat Of Oil Bound Bituminous Primer @ 0.25 Kg/Sq.M Ii) Providing And Laying 3 Mm Thick App Modified Water Proofing Membrane Weighing Not Less Than 3.5 Kg / Sqm Reinforced With Non Woven Polyester Mat Weighing Not Less Than 160 Gm/Sqm All As Specified Procured From Any One Of The Approved ManufacturerS Iii) Apply One Coat Of Solar Reflective Bituminous Aluminium Paint @ 0.15 Kg/Sqm Over Membrane Over Non Assesble Roof Surfaces Complete All As Per ManufacturerS Instructions And As Directed . 203 M/L Brick Work In Cm1:4, In Half Brick Thick Wall. 204 S&F In Repair Europen Wc China Ware Coloured Cascade With Cistern And Complete Fitting.Make: Jaquar/Hindware/Kohlar 205 S/F Vitreous China Toilet Paper Holder Fixed To Walls With Chromium Plated Cp) Brass Screws 206 S/F Vitreous China Soap Dish Of Appx Size 160*160*90Mm Any Type Fixed To Plugs With Chromium Plated Brass Screws 207 S/F Sheet Glass Shelf Assembly Consistig Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Brackets Guard And Railing 60Cm Long 208 S & F Brass Chromium Plated Tubular Towel Rail, 20 Mm Dia, D Type, 60 Cm Long Between Flanges Complete All As Specified. 209 M & L For Granite 20 Mm Thick Machine Cut, Bedded And Jointed With Grey Cement Slurry And Pointed With White Cement With Admixture Of Pigment To Match The Shade Of Granite Stone Including Griding And Polishing Types All As Specified. 210 M & L For Machine Cut Cudappa Stone Slab 20 - 25 Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete All As Specified. 211 M&L For 75 Mm Thick Pcc 1:3:6 Type C-1 (Using 20Mm Graded Stone Aggregate) As In Plinth Protection/Floors Complete All As Specified And Directed. 212 S&F Health Faucet Including Ms/Anodised Hanging Device Fixed Complete All As Specified And As Directed. 213 Surface Excavation Not Exceeding 30Cm Deep And Averaging 15Cm Deep And Getting Out In Loose / Soft Soil All As Specified And Directed. 214 M&L For Broken Stone Hard Core Of Gauge N. Exc 63Mm, Deposited, Spread And Levelled In Layers N Exc 15Cm Thick, Watered And Rammed To A True Surface All As Specified And Directed. 215 M & L 100Mm Thick Pcc 1: 4: 8 Type D2 (Using 40Mm Graded Stone Aggregate) As In Sub Base Complete All As Specified And Directed. 216 M&L For Machine Pressed Precast Concrete Interlocking Paver Block Rubber Moulded Any Shape And Size Confirming To Is 15658-2006 Of 60Mm Thickness, M-35 Grade With Grey And Pigment As In Floor/Pavement Complete All As Specified And As Directed. 217 M&L For Providing Precast Concrete Type C-1, 1:2:4(Using 20Mm Graded Stone Aggregate) As In Kerb Blocks With Plain Fiar Faces, Including Chamferes, Weathering, Throating Etc And Setting In Mortar 1:4 Complete With Joints To Match. 218 M&L For Cement Concrete Type 1:4:8 Type D-2 (Using 40Mm Graded Stone Aggregate) As In Foundations, Filling And Mass Concrete Complete All As Specified And As Directed. 219 M & L For Sand Filling Under Floors Or In Foundation Including Watering And Consolidation 220 S & F In Replacement Of New Generation Energy Saving And Environmental Friendly Long Life Led Building Security Light 1X25 Watts Made Up Of Pressure Die Cast Alluminium Housing With High Power Led As Light Source And Lense Embedded Pc Cover Having Top Opening Separate Driver Compartment With Ip65 Protection And Impact Resistance Of Ik07, With All Accessories Including Suitable Bracket With 32Mm Bore Light Grade Gi Pipe Bemd To Shape, Including Ms Clamp Of Size Of Required Size And Pvc Cable 1.5 Sqmm Twincore From Ceiling Rose To Light Fittings Complete All As Specified And Directed By Engineer-In-Charge. 221 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 9/10W 6500K Of Capacity ,10 Watt,2 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 222 M&L For Boring Of Holes Under Road, Pavement, Hard Standing By Trench-Less Technology Using Ultrasound Technique And Necessary Machine Suitable To Pass Through 40 To 80 Mm Bore Gi Tubing And Cable Etc Complete All As Specified And Directed.Note: Gi Pipe Shall Be Measured And Paid Seperately Under Relevant Item.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Contract Date: Ref. Documents Contract Value : 4.10 Lakh
Local Bodies No of Bidders 1
Contract Date: Ref. Documents Contract Value : 4.10 Lakh
Local Bodies No of Bidders 1
Contract Date: Ref. Documents Contract Value : 4.10 Lakh
Local Bodies No of Bidders 1
Contract Date: Ref. Documents Contract Value : 4.10 Lakh
Local Bodies No of Bidders 1
9.
Defence #11457504 Technical Bid
Tender for Sheet Roof - Trenching Ground , M & L For Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Hard/Dense Soil , S & F For Mild Steel Framed Work Such As Grills, Gratings, Etc.. With Ends Of Bars Shouldered And/Or Riveted, Or Forged Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework Of Water Tanks And Similar Work Conforming To Fe.290.Gde-E-165 , M & L For Painting Steel & Iron Surfaces Of Any Description, Over 10Cm In Width Or Girth, Not Otherwise Described Which Includes Preparation Of New Or Previously Untreated Surfaces, Priming With Red Oxide, Zinc Chrome, Applying Synthetic Enamel (Ordinary Tint) , S & F For Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specified , M & L For Stone Masonry In Walling Of Squared Rubble, Regular Coursed, Well Bonded, Bedded And Solidly Hearted, Built In Cement Mortar 1:4 , Labour For Hammer Dressing Sandstone/Limestone/Laterite Stone With Maximum Depression On To Face Stones And Dressing Of Face Beds And Joints, As Specified Face From Straight Edge Held Against The Dressed Surface N Exc. 20 Mm Of Squared Rubble Masonry, Regular Coursed , Laying And Jointing Pvc Pipe. Heading , M & L For Formwork To Fair Finished Edges Of Concrete Flats, Treads, Breaks In Floors, Window Cills, Concrete Railings, Openings In Concrete Walls, Floor And Roofs N Exc 20 Cm Wide And Sides Of Rcc/ Plain Cement Concrete Bands In Walls, Horizontal Or Sloping And Similar Work Exc 10Cm But N Exc 20Cm Wide , M & L For Reinforced Cement Concrete Nominal Mix Type B1 1:2:4 (20 Mm Aggregate) Aggregate)In Beams, Cantilevers, Bressummers, Lintels Over 1.5M Span , M & L For Mild Steel Tmt Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips , M & L For Mild Steel Tmt Bars 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
10.
New and Renewable Energy #11454900 AOC
Bids Are invited for Title1 - Wall painting with acrylic emulsion paint , Title2 - Providing and applying white cement based , Title3 - Finishing walls with Acrylic Smooth exterior paint , Title4 - 15 mm cement plaster , Title5 - Neat cement punning , Title6 - Providing and fixing bright finished brass hanging type floor door stopper , Title7 - Painting with synthetic enamel , Title8 - Applying one coat of water thinnable cement primer , Title9 - 6mm cement plaster , Title10 - Providing and fixing Ist quality ceramic glazed wall tiles , Title11 - White washing with lime , Title12 - Clearing and stripping the site , Title13 - Supply and transport of earth , Title14 - Earth work in excavation , Title15 - Providing and laying in position specified grade of PCC , Title16 - Providing and laying in position specified grade of reinforced cement concrete , Title17 - Steel reinforcement , Title18 - Centering and shuttering , Title19 - Structural steel work riveted , Title20 - Providing and fixing ISI marked flush door shutters , Title21 - Providing and fixing concertina coil fencing , Title22 - With GI barbed wire , Title23 - Providing and fixing GI chain link fabric , Title24 - Removal of wet dry sludge , Title25 - Removal of existing damaged glass , Title26 - Welding by gas or electric plant , Title27 - Removal of existing damaged door , Title28 - Dismantling colour coated roofing Sheets , Title29 - Rectifying all defects causing leakage in pre coated iron profile roofing sheets , Title30 - Providing and fixing precoated galvanised iron profile sheets , Title31 - Demolishing RCC work by mechanical means , Title32 - Supplying and applying bituminous solution primer , Title33 - Random rubble masonry , Title34 - Brick work with common Fly ash bricks , Title35 - Providing and injecting chemical emulsion , Title36 - Half brick masonry , Title37 - Providing and fixing white vitreous china pedestal type water closet , Title38 - Providing and fixing wash basin , Title39 - Providing and fixing beveled edge mirror , Title40 - Providing and fixing CP brass bib cock , Title41 - Providing and fixing CP brass stop cock , Title42 - Providing and fixing water closet squatting pan , Title43 - Providing and laying Ceramic glazed floor tiles , Title44 - Providing and fixing on wall face un plasticised Rigid PVC SWR pipes , Title45 - Providing and placing on terrace polyethylene water storage tank , Title46 - Providing and fixing inposition collapsible steel shutters , Title47 - Providing and fixing PTMT pillar cock , Title48 - Providing and laying Bituminous concrete , Title49 - Sub-base course , Title50 - Base course , Title51 - Providing and fixing brass 100mm mortise latch an dlock with 6 levers , Title52 - Developing lawn , Title53 - 30 mm thick factory made Polyvinyl Chloride , Title54 - Providing and fixing GI chain link fabric , Title55 - Do GI Pipe 25m dia , Title56 - 32 mm dia nominal bore , Title57 - 50 mm dia nominal bore , Title58 - Providing and fixing false ceiling , Title59 - Supplying and filling in plinth , Title60 - Providing and laying dampproof course , Title61 - Finishing with Epoxy paint , Title62 - Providing fixing glass panes , Title63 - Providing and laying vitrified floor tiles , Title64 - Providing and laying Polished Granite stone , Title65 - Providing and fixing Stainless Steel , Title66 - Providing and fixing Stainless Steel 24 inch Towel Rod , Title67 - Providing and fixing of Overhead Shower , Title68 - Providing and fixing of Shower Arm Casted Chrome , Title69 - Providing and fixing with all fittings of Angle Cock , Title70 - Providing and fixing with all fitting of two way bib Cock , Title71 - Providing and fixing with all fitting of Float valve , Title72 - Constructing masonry Chamber , Title73 - Dry stone pitching , Title74 - Providing and fixing gun metal gate valve , Title75 - Providing and laying 60mm thick faciory made cement concrete interlocking paver block Total Quantity : 14934
Contract Date: Ref. Documents Contract Value : 34.73 Lakh
Boards / Undertakings / PSU No of Bidders 2
Andhra Pradesh View Result →
12.
Science and Technology #11440503 Technical Bid
Tender for Earth Work , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, For All Lift, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.All Kinds Of Soil. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 And For All Lif. , Excavating, Supplying, Stacking And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Foundation Trenches, Plinth, Sides Of Foundation Etc. Complete For All Lift. , Cement Concrete (Cast In Situ) , Providing And Laying In Position Excluding Cement Concrete Of Level: Specified Grade The Cost Of Centering And Shuttering - All Work Up To Plinth 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Ill) Derived From Natural Sources: 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Sunken Floor Etc., Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering And Finishing: 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Ill) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Suspended Floors, Roofs, Landings, Balconies And Access Platform , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Columns, Pillars, Piers, Abutments, Posts And Struts , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement.All Works Upto Plinth Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement.All Works Above Plinth Level Upto Floor V Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Stone Work , Coursed Rubble Masonry (Second Sort) With Hard Stone In Foundation & Plinth With :Cement Mortar 1:6(1 Cement : 6 Coarse Sand) , Cladding Work , Providing Edge Moulding To 18Mm Thick Marble Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge,Granite Work , Wood And P. V. C. Work , Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately).Sal Wood , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Providing 40X5 Mm Flat Iron Hold Fast 400 Mm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 300X100x150 Mm 1:3:6 Mix (1 Cement: 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size). , Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. , Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm), With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. , Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper , Providing And Fixing Factory Made Upvc Glazed/Wire Mesh Windows/ Doors Comprising Of Lead Free Upvc Multi-Chambered Frame, Sash And Mullion/Coupler (Where Ever Required) Extruded Profiles Having Minimum Wall Thickness Of 1.70 Mm For Series R1 And R2 Profiles And 2.10 Mm For Series R3 And R4 Profiles Conforming To En: 12608 In Any Shape, Colour And Design Duly Reinforced With Galvanized Mild Steel Section Made Of Required Shape & Size As Per Cpwd Specification, Upvc Extruded Glazing Beads, Interlocks And Lnline Sash Adaptor (Where Ever Required) Of Appropriate Dimension, Epdm Gasket, Hardware, Ss 304 Grade Fasteners Of Minimum 8 Mm Dia With Countersunk Head, Comprising Of Matching Polyamide Pa6 Grade Sleeve For Fixing Frame To Finished Wall As Per Is 1367 : Part 1 To 14, Plastic Packers, Plastic Caps And Necessary Stainless Steel Screws Etc. Profile Of Frame, Sash & Mullion (If Required) Shall Be Mitred Cut And Fusion Welded/Mechanically Jointed Duly Sealed At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealant Over Backer Rod Of Approved Size And Quality, All Complete As Per Approved Drawing Conforming To Cpwd Specification & Direction Of Engineer-In-Charge. Section Of Steel Reinforcement And Cross Sections Of Upvc Profiles To Be As Per Design Approved By Engineer-In-Charge. Wire Mesh / Glazing Of Plain/ Toughened/ Laminated/ Double Glass Unit With / Without High Performance Coatings As Per Design Requirements And Conforming To Is: 3548 & Is: 16231 Shall Be Paid Separately. Note:- Structural Design Proof Checked From A Government Engineering Institute, To Be Provided By The Manufacturer For (I) Sites With Basic Wind Speed 45 M/Sec As Per Is 875 - Part 3 (Ii) Sites With Structure Height More Than 20M For All Wind Speedscasement Window Double Panels With Fixed Mullion With S.S. 304 Friction Hinges As Per Size And Weight Of Sash, Multi-Point Locking System, Zinc Alloy (Zamak) Powder Coated Handles.Using R2 Series With Frame (39 Mm & Above) X (39 Mm & Above) & Sash (39 Mm & Above) X (60 Mm & Above) & Mullion (39 Mm & Above) X (60 Mm & Above). (Height Upto 1.2 Metre). , Steel Work , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Hot Finished Welded Type Tubes , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works , Flooring , Providing And Laying Vitrified Tiles In Floor In Diferent Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) Jointing With Grey Cement Slurry @3.3 Kg/Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc. The Tiles Must Be Cut With The Zero Chipping Diamond Cutter Only . Laying Of Tiles Will Be Done With The Notch Trowel, Plier, Wedge, Clips Of Required Thickness, Leveling System And Rubber Mallet For Placing The Tiles Gently And Easily.Double Charge Vitrified Tile Polished Finish Of Size Of Tile 600 X 600 Mm , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge :Flamed Finish Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. , Finishing , 20 Mm Cement Plaster Of Mix:1:4(1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix:1:4(1 Cement: 4 Coarse Sand) , 6 Mm Cement Plaster 1:3 (1 Cement: 3 Fine Sand) Finished With A Floating Coat Of Neat Cement And Thick Coat Of Lime Wash On Top Of Walls When Dry For Bearing Of Reinforced Cement Concrete Slabs And Beams. , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , 12 Mm Thick Plain Cement Mortar Bands In Cement Mortar 1:4 (1 Cement: 4 Fine Sand):Moulded Band , Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work (Two Or More Coats Applied @ 1.43 Itr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm) , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade :Two Or More Coats On New Work , French Spirit Polishing :Two Or More Coats On New Works Including A Coat Of Wood Filler , Wall Painting With Acrylic Emulsion Paint, Having Voc (Volatile Organic Compound ) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats , Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc (Volatile Organic Compound ) Content.With Water Thinnable Cement Primer On Wall Surface Having Voc Content Less Than 50 Grams/Litre , Dismantling And Demolishing , Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge.Nominal Concrete 1:3:6 Or Richer Mix (Including Equivalent Design Mix) , Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. , Aluminium Work , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item):With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Filling The Gap In Between Aluminium Frame & Adjacent Rcc/ Brick/ Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete.Upto 5 Mm Depth And 5 Mm Width , Market Rate Items , Provinding Precast Cement Concrete Solid Block Masonry Including Hoisting And Setting In Position With Cement Mortar 1:6 (Cement :6 Coarse Sand) Completed As Per The Direction Of Engineer In Charge As Per Site Condition , Providing And Fixing 5 Mm Thick Clear Transparent Acrylic Sheet Of Approved Brand And Manufacture For Fixed Curved Portions In Openings, Including Epdm Rubber/Neoprene Gasket And All Necessary Accessories, Complete In All Respects As Per The Directions Of The Engineer-In-Charge. , Electrical Work , Laying And Fixing Of One No Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Upto 35 Sq.Mm (Clamped With 1Mm Thick Saddle) Size On Wall Surface As Required. , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For 4 X 16 Sq. Mm (25Mm) Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. , Supplying And Fixing Of 4 Way (4 + 12), Double Door Surface/ Recess Mounting, Vertical Type, 415 V, Tpn Mcb Distribution Board Of Sheet Steel, Dust Protected, Duly Powder Painted, Inclusive Of 200 A Tinned Copper Bus Bar, Common Neutral Link, Earth Bar, Din Bar For Mounting Mcbs As Required . , Supplying And Fixing 6 Way, Double Door, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator. , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole And Neutral , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Triple Pole , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Triple Pole And Neutral , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.4 X 6 Sq. Mm + 2 X 6 Sq. Mm Earth Wire , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 2 Module (75Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 3 Module (100Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 6 Module (200Mmx125mm) , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 5/6 A Switch , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 15/16 A Switch , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 3 Pin 5/6 A Socket Outlet , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 6 Pin 15/16 A Socket Outlet , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Bell Push , 2M Stepped Type Electronic Fan Regulator , Wiring For Light Point/Fan Point/Exhaust Fan Point/Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Group Controlled (Looped) Light Point/ Fanpoint/ Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit,And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. (Group-C) , Providing And Fixing 6 Swg Dia G.I Wire On Surface Or In Recess For Loop Earthing As Required. , Supplying, Installation, Testing & Commissioning Of Photo Electronic Smoke Detector With Builtin Led And Mounting Base Plate Suitable With Ms Junction Box For Operation On 12V / 24V Complete With All Connections Etc. As Required. , Supplying, Installation, Testing & Commissioning Of Manual Call Box Of Abs Type In Surface/Recess With Stainless Steel Chain & Hammer Assembly Complete With Glass And Push Button Etc. As Required. , Supplying & Laying Of 2 X 1.5 Sqmm Fire Alarm Armoured Cable, 600/1000V Rated With Annealed Copper Conductor Having Xlpe Insulation, Steel Wire Armouring & Frls Outer Sheath Complete As Required. , Supplying And Fixing Dp Sheet Steel Enclosure On Surface / Recess Along With Upto 32A, 240 V, C Curve Dp Mcb Complete With Connections, Testing And Commissioning Etc. As Required. , Supplying And Fixing 30 A, 415 V, Tpn Industrial Type Socket Outlet, With 4 Pole And Earth, Metal Enclosed Plug Top Alongwith 32 A C Curve, Tpmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required , Supplying And Fixing 20 A, 240 V, Spn Industrial Type Socket Outlet, With 2 Pole And Earth, Metal Enclosed Plug Top Alongwith 20 A C Curve, Spmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required , Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep,Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cmm/W) Minimum 6.85, Air Delivery Minimum 215 Cmm, 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Speed Control Compitable For Electronic Type Regulator And All Remaining Accessories Including Safety Pin,Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Including Fixing Fan Hook In Ceiling Complete As Required. , Supplying, Installation, Testing & Commissioning Of Panel Light 2X2 Ft.,40W Of Powder Coated Die Cast / Extruded Aluminium Body (Thickness ≥ 1.20 Mm) Body Material And Construction As Per Is : 10322 With Driver As Per The Requirement With Driver Efficiency 85%, Operating Voltage Ac 140 270 Volt, Freq 50/60 Hz, Operating Temp Range -15 Deg To 40 Deg Centigrade, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection, Thd 10% , P. F.≥0.95, Ip20, Cri 80, Ugr (Unified Glare Rating) 19, Flicker Free, (Flicker Should Be Below 5 %), Life Time (Led,Driver & Electrical Circuitry), Of Minimum 50000 Burning Hours With, 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11Report, Cct 5700°K (As Per Ansi Bin), Sdcm(Standard Deviation Color Matching) 3, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard And Trade Mark Certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing. Complete In All Respect I/C Connections With 1.5 Sq Mm Frls, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required. System Lumen Efficacy ≥105 Lm/Watt Output . Lm79 & Lm80 Test Report From Nabl Lab For All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. , Supplying And Fixing Of 25Mm Size Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. , Supplying And Drawing 1 Run Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. , Supplying And Installing 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness Size Of Perforated Painted With Powder Coating M.S. Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended/Surface Mount From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. , Supplying And Installing 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness Size Of Perforated Painted With Powder Coating M.S. Cable Trays Bends With Perforation Not More Than 17.5%,, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. , Supplying And Fixing Call Bell/ Buzzer Suitable For Single Phase, 230 V, Complete As Required. , Supplying And Fixing Fp Mcb Sheet Steel Enclosure With Din Rail On Surface / Recess Etc. As Required. , Supplying & Fixing Of 4Pole, 63 A Rating, 415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,4C X 16Sq.Mm, Aluminium , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,4C X 6Sq.Mm, Copper , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,3C X 4 Sq.Mm, Copper , Supply And Laying Of Un Armoured Copper Single Core 10 Sq.Mm Flexible Cable With Annealed Copper Conductor In Suitable Size Hdpe Pipe In Ground/ On Surface As Required. , Supplying And Making End Termination With Brass Compression Gland And Copper Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Copper Conductor Cable Of 1.1 Kv Grade As Required.4 X 6 Sq.Mm , Supplying And Making End Termination With Brass Compression Gland And Copper Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Copper Conductor Cable Of 1.1 Kv Grade As Required.3 X 4 Sq.Mm , Supply ,Installation, Testing And Commissioning Of 2 Tr/24000Btu Per Hour And Bee-5 Star Rated Wall Mounted Inverter Type Hi Wall Split Cooling Air Conditioner Having Wireless Remote Controller, Hermetically Sealed/Scroll/Rotary Compressor And Eco Friendly Refrigerant,Initial Charge Of Refrigerant,Condensor And Evaporator Coils Of Copper Material, Air Filter With Auto Swing & Auto Restart Features, Suitable For Operation On 230V, Single Phase, 50Hz, Ac Power Supply. The Indoor Unit Shall Be Fixed Rigidly On Wall Using Necessary Frame, The Outdoor Unit Shall Be Mounted On Wall Or Floor Using Suitable Powder Coated Ms Angle Frame As Required. Including Clamps, Bolts, Nuts,Vibrating Dampers, Laying Of 3 Meter Standard Length Of Copper Refrigerant Piping With 3 Meter Pvc Covering Pipe, 3 Meter Drain Piping, Wrapping Tape And Necessary Insulation ,Electrical Flexible Cable Connectivity Between Indoor And Outdoor Unit. Necessary Drilling Of Hole And Finishing The Same To Match For The Surrounding As Required. , Supplying And Fixing Of Frp Box 200Mmx140mmx95mm Size (Nominal Size) On Surface With Hinged Door With Suitable Grounding Copper Bar Link With Holes Fitted Inside The Box Etc. As Required. , Supplying And Fixing Of Dual Rj 45 / Io Outlet On Existing Modular Switch Plate. , Supply,Installation,Testing And Commissioning Of Maintenace Free Earth Pit Of Single Pipe Technology Copper Pipe Of 2000Mm Long (Min), Outer Dia 50 Mm, Wall Thickness 1.2Mm(Min), Filled With Highly Conducting Metallic Compounds With The Permanent Sealing At Both The Ends And Lead Terminal Of 50 X 10 Mm Size At The Top The Length Of The Electrode Shall Be 2000 Mm Excluding The Lead Terminal And The Length Of The Lead Terminal At The Top Shall Be Minimum 50Mm. To Ensure The Moisture Content And Electrical Conductivity, Resistance Lowering Grounding Minerals Shall Be Filled Around The Electrode Of (Min25 Kg) .Heavy Duty Weather Proof Plastic Earth Pit Chamber With Cover Of Dimension 300 Mm Dia (Top), 260 Mm Dia(Bottom) And 300 Mm (Height) Shall Be Used, Numbering Of Pit And Measured Value Written With Weather Proof Painting Or Stickering. As Required.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
13.
Drinking Water Supply and Sanitation #11440415 Technical Bid
Tender For Providing Interlock Paver Block With Strom Water Drain At E3 Roadin Aruppukottai Municipality.; 1 Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum 2 Supplying and filling in foundation andbasement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. 3 Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 4 Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 5 Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard 6 Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. 7 Supplying and laying Rubberised interlocking Paver blockM40 grade Providing and laying of83mmthick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, sand cushion 50mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. 8 Plastering with cement mortar 1:4 (One Part of Cement and Four part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309)
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
14.
Housing Urban and Rular Development #11435721 AOC
Bids Are invited for Maintenanceitems Precastrcccoverhd20 - Precast Rcc Manhole Cover With Frame Of Hd-20 Grade As Per The Detailed Specification Mentioned In The Specification Document. , Precastrcccoverehd35 - Precast Rcc Manhole Cover With Frame Of Ehd-35 Grade As Per The Detailed Specification Mentioned In The Specification Document. , Precastrcccoverehd35perforated - Precast Rcc Manhole Perforated Cover With Frame Of Ehd-35 Grade As Per The Detailed Specification Mentioned In The Specification Document. , Ccpaverblock - Interlocking Cc Paver Block As Per The Detailed Specification Mentioned In The Specification Document. , Stoneaggregate20mm - Stone Aggregate As Per The Detailed Specification Mentioned In The Specification Document. , Coarsesand - Coarse Sand As Per The Detailed Specification Mentioned In The Specification Document. , Fpsbrick - Fps Bricks As Per The Detailed Specification Mentioned In The Specification Document. , Opc43 - Portland Cement As Per The Detailed Specification Mentioned In The Specification Document. , Precastcckerbstone - Precast Cc Kerb Stone As Per The Detailed Specification Mentioned In The Specification Document. , Bitumenemulsion - Bitumen Emulsion As Per The Detailed Specification Mentioned In The Specification Document. , Rccgratingwithframe500x450 - Rcc Grating With Frame As Per The Detailed Specification Mentioned In The Specification Document. , Gsb - Granular Sub Base As Per The Detailed Specification Mentioned In The Specification Document. , Redsandkerbstone - Red Sand Stone As Per The Detailed Specification Mentioned In The Specification Document. , Precastrccslab100mm - Precast Rcc Rectangular Drain Cover 100 Mm Thick As Per The Detailed Specification Mentioned In The Specification Document. , Precastrccslab150mm - Precast Rcc Rectangular Drain Cover 150 Mm Thick As Per The Detailed Specification Mentioned In The Specification Document. , Redsandstoneslab - Fine Dressed Red Sand Stone As Per The Detailed Specification Mentioned In The Specification Document. , Tactiletile - Tactile Tile As Per The Detailed Specification Mentioned In The Specification Document. , Ccbollard - Cc Bollard As Per The Detailed Specification Mentioned In The Specification Document. , Sfrcrailing - Pre-Fabricated Sfrc Railing As Per The Detailed Specification Mentioned In The Specification Document. , Rccgrating500x450 - Rcc Grating Without Frame As Per The Detailed Specification Mentioned In The Specification Document. Total Quantity : 19526
Contract Date: Ref. Documents Contract Value : 75.09 Lakh
Government Departments No of Bidders 3
15.
Rural Development #11427392 Technical Bid
Tender For Supply Various Type Of Construction Material Supply Various Type Of Construction Material G Gp Vihirgaon- 1 80 Mm. Metal White-(Hand Broken Metal) With Royalty 2 40 Mm Metal White- (Hand Broken Metal) With Royalty 3 40 Mm Metal Black- (Crusher Broken Metal) With Royalty 4 20 Mm Metal Black- (Crusher Broken Metal) With Royalty 5 12 Mm Metal Black-(Crusher Broken Metal) With Royalty 6 6 Mm Metal Black-(Crusher Broken Metal) With Royalty 7 Boulders Rubbles And Masonary Stones 8 Sand River (Unscreen) With Royalty 9 Sand (Nallah Bed) 10 Soft Murum With Royalty 11 Hard Murum With Royalty 12 Cement 53 Grade Opc 13 Cement 53 Grade Ppc 14 Burnt Bricks ( Ii Class) 15 Mild Steel Bars Of Various Sizes 16 Tmt Steel Bars Of Various Sizes 17 Tmt Steel Bars Of 6Mm 18 Tmt Steel Bars Of 8Mm 19 Tmt Steel Bars Of 10Mm 20 Tmt Steel Bars Of 12Mm 21 Tmt Steel Bars Of 16Mm 22 Bitumen Pack Tin 60/70 At Mumbai 23 Murum Carting Only 24 Weste Material Carting 25 Mixter Machine Per Day With Desel And Driver 26 Water Tanker With Desel And Driver 27 Centring Rent For Drain Work 28 Centring Rent For Cement Road 29 Centring Rent For Building Work 30 Jcb Witjh Desel Anddriver 31 Centring Tar (Per Kg) 32 Rcc Pipe 900 Mm 33 Rcc Pipe 800 Mm 34 Rcc Pipe 600 Mm 35 Rcc Pipe 450 Mm 36 Rcc Pipe 300 Mm 37 Compaction Of Earth Work In Embankment Upto Layer Of 30Cm Comp Machinary Charges Only 38 Compaction Of Soft Murum/ Kankad 2.00 To 7.00 Width (200Mm Loose) With Static Roller Including Necessary Artificial Watering Etc Complete 39 Transporttion Of Soft Murum On Road Side Etc Complete As Per Analysis 40 Information Board 1)Size 1.20 X 0.90 41 2) Size 0.75 X 0.90 42 Transportation Of Excavated Soil From Ex-Mat. Tank To Field Up To 3Km 43 Pvc Pipe 150 Mm 44 Pvc Pipe 75 Mm 45 Pvc Pipe 90 Mm 46 Pvc Pipe 110 Mm 47 Cement Pipe Various Size 48 Cfl Light 20 Watt 49 Led Street Light 20 Watt 50 Led Street Light 24 Watt 51 Led Street Light 30 Watt 52 Pvc Saket Various Size 53 Reduser 160*140 54 Reduser 140*110 55 Reduser 110*90 56 Reduser 90*70 57 Reduser 75*63 58 Reduser 75*40 59 Elbow Round 60 Nipples 61 Siddle Peace 62 Ferud 63 Walve 65 Mm 64 Walve 80 Mm 65 Sluice Walve 65 Mm 66 Sluice Walve 80Mm 67 Air Walve 50 Mm 68 Oil Paint 69 Rcc Door Frame 70 Destemper 71 Birla White 72 Hand Wash Basine 73 Show Shem 74 Comod Sheet 75 Sub Mersible Motor Pump 10 Hp 76 Sub Mersible Motor Pump 06 Hp 77 Sub Mersible Motor Pump 3 Hp 78 Sub Mersible Cable 3 Core 2.50 Sq.Mm 79 Oil Engine 80 Meter Stone 81 Steel Pipe Various Size 82 Ferlong Stone 83 Grill Work 84 Rollar Per Day With Desel Driver 85 Murga 86 Pavour Block 87 Barbed Wire(Chain Link) 88 Steel Angle For Chain Link Fensing 89 Quota Tyles 90 Vetryfied Tyles 91 Bt Pod 92 Wc Pod 93 Nutri Tap 94 Ms Poor 95 Ac Sheet 96 Gi Sheet 97 G.I Pipe B Class 50 Mm(Various Type) 98 G I Flanged 99 Panel Board(Fabrication Work)
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
16.
Defence #11427184 Technical Bid
Tender for Sch A Part-I To Xi Note: This Schedule Is Pre-Priced By Mes And The Rate Indicated Under Col 5 Signifies This Fact Only , Total Amount Of Sch ‘A Part I (Building & Structures) , Total Amount Of Sch ‘A Part Ii (Site Clearance, Excavation & Earthwork ) , Total Amount Of Sch ‘A Part Iii (Cooling Appliances & Air-Conditioning) , Total Amount Of Sch ‘A Part Iv (Internal Water Supply) , Total Amount Of Sch ‘A Part V (Internal Electric Supply) , Total Amount Of Sch ‘A Part Vi (Road / Path) , Total Amount Of Sch A Part-Vii (Area Drainage ) , Total Amount Of Sch A Part-Viii (Sewage Disposal ) , Total Amount Of Sch A Part-Ix (External Water Supply) , Total Amount Of Sch A Part-X (External Electric Supply) , Total Amount Of Sch A Part-Xi (Hot Water Supply) , Schedule A Part-Xii (Misc B/R And E/M Works) Note: This Schedule Is Not Pre-Priced By Mes And The Rate Indicated As Rs 0.00 Under Col 6 Signifies This Fact Only. Bidders Shall Insert Their Rate In Column-7 For That Purpose. , Supply And Fix Engineering Body Desert Cooler Electric Driven Single Phase 230 Volts, Having Nominal Air Flow Capacity Of 4500 Cum Per Hour,Tank Capacity 105 Ltrs,With Auto Louver Movement,With Min Ait Throw 15 Mtr Complete All As Specified And As Directed By Engr-In- Charge. Make:Kenstar Turbocool Neo Hc 105 Or Techno Commercial Equivalent Make. , Supply, Installation, Commissioning Refrigerator, Electric Driven (Single Phase),Capacity 340 Ltrs , Double Door, Smart Inverter Compressor Of Latest Model, Eco Friendly , Digital Display, Toughened Glass Shelves Complete With All Accessories All As Specified And Directed By Engineer In Charge. , Supply Installation, Commissioning Of Metal Top Deep Freezer Double Door Single Phase Storage Type Deep Freezer 320 Ltrs Cap Of Latest Model Complete With All Accessories All As Specified And Directed. , Supply And Fix Voltage Stabilizer For Automatic Operation, Single Phase Naturally Air Cooled Indoor Type & Designed For Input Variation Between 170 V To 250 V With Output Voltage Stabilized At 230 V With Accuracy Of ± 2.5% And Of Capacity 2.0 Kva All As Specified And Directed , Supply And Fix Voltage Stabilizer For Automatic Operation, Single Phase Naturally Air Cooled Indoor Type & Designed For Input Variation Between 170 V To 250 V With Output Voltage Stabilized At 230 V With Accuracy Of ± 2.5% And Of Capacity 3.0 Kva Complete Suitable For Inverter Type Ac All As Specified And As Directed. , Design, Fabricate, Supply, Install, Testing And Commissioning Of Complete Electrical Chimney/Electrical Hood With Filters Comprising Of Following Items. A) Supply,Install,Testing And Commisssioning Of Kitchen Hood Made Ss 304 Matt Finish 1 Mm Thick Wall Mounted Type With Removable Grease Stop And Fixing Brackets,Oil Drain Channel Of Size 36 X 72 Of Required Length Including Drain Collector & Connecting With Exhaust Ducting Etc Complete All As Specified And As Directed-2 Rm B) Supply And Install Removable Grease Stop Filters Suitable Size Complete All As Specified And As Directed- 02 Nos C) Supply,Install,Testing And Commissioning Exhaust Blower Of Capacity 1 Hp ,240 Volts Single Phase 1440 Rpm Connecting With Exhaust Ducting And Suitable Copper Cable Connecting Complete All As Specified And As Directed:-01 Nos D) Supply And Installation Collar Damper Of Suitable Size For Connecting Between Duct And Exhaust Hood Made Out Of 20 Swg Complete All As Specified And As Directed.-02 Nos E) Supply And Fix Anti Vibration Dush With Ms Fabricated Stand Frame Of Suitable Size For Resting Blower Complete All As Specified And As Directed. , Supply And Install Exhaust Ducting Of Size 500 Mm X 500 Mm Made Of Gi Sheet 24 Swg Including Connecting With Ceiling Mounted Exhaust Hood Up To Terrace With Ms Angle Frame 25 X 25 X 3 Mm Thick,Fixing Of Brackets With Nut Bolts,Gaskets Supporting Thread Rod,Channels Etc,Including Painting The Steel Surfaces With Two Coats Of Synthitic Enamel Paint Over One Coat Of Red Oxide Primer Complete All As Specified And As Directed. , S&F 15 Mm Bore Pillar Taps, Cast Copper Alloy With Capstan Heads, Fancy Type, Chromium Plated Screwed Down High Pressure With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly Nuts Screwed For Iron Pipe And Fixed Complete All As Specified And As Directed. , S&F Health Faucet (Abs Body) Suitable For 15 Mm Dia Pipe With 1 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete In All Respect As Specified. , S&F Two Way Bib Tap 15Mm Dia, With Wall Flange And Aerator Screwed Down For Iron Pipe Or For Brass Ferrule Complete All As Specified And As Directed. , S&F Wall Mixer For Mixing Hot And Cold Water And Bend For Connecting To Shower,15 Mm Bore Screwed For Iron Pipe And Fixed Complete All As Specified And As Directed. , S & F Flush Cock, Push Type 15Mm Dia, Cast Copper Alloy, Fancy Type, Chromium Plated, For Iron/Cpvc Pipe Or Unions Complete All As Specified And As Directed. , S&F 15 Mm Bore Pillar Tap With Swan Neck, Cast Copper Alloy With Capstan Heads, Fancy Type, Chromium Plated Screwed Down With Long Screwed Shanks And Fly Nuts Screwed For Iron/Cpvc Pipe And Fixed Complete All As Specified And As Directed. , S & F In Replacement Square Profile Led Lighting Fixture With Extruded Polycorbonate,Environmental Friendly,Energy Efficient Ready To Use Pack Led Tube Light Fitting 20 Watt With Led Light Source 6500K With Uniform Light Output,With All Accessories Including Its Connection Complete With All As Specified And Directed By Engineer-In-Charge. , S & F Square Profile Led Lighting Fixture With Extruded Polycorbonate,Environmental Friendly,Energy Efficient Ready To Use Pack Led Tube Light Fitting 10 Watt With Led Light Source 6500K With Uniform Light Output,With All Accessories Including Its Connection Complete With All As Specified And Directed By Engineer-In-Charge. , Supply And Fixing In Factory Made Powder Coated Sheet Metal Enclosure, Tpn Vertical Distribution Boards With Mccb Four Pole 25 Ka, 100 annual periodical maintenance With Fixed Thermal And Magnetic Settings As Incomer Ip43 Protection Double Door : Plain 4 Way With Suitable Rated Busbar,Neutral Link, And Mcb Sp/Tp As Outgoings Complete All As Specified And Directed. Note :Mccb And Mcbs Are Not Included In This Item And Paid Separetely. , S&F In Replacement, Mccb 4 Pole, 415 V, Adjustable Type, 100 Amps With Breaking Capacity 25 Ka And Making Connection With Suitabl Size Of Copper Lugs Etc Complete All As Specified And As Directed. , M&L For Construction Of New Reinforced Cement Concrete Septic Tank For 50 Users Designed To Carry Sewage And Sludge Water, Plain Cement Concrete 1:4:8 Below Foundation, Reinforced Cement Concrete Roof Slab Including Beams, Etc, Using Tmt Crs Bars Grade Fe-500D/Fe-550D, With Vent Shaft , Manhole Opennings With Cover Connection, Including Excavation Earthwork In Any Type Of Soil/ Ordinary Rock Complete All As Shown On Td Drg. Afb/Td/228/2018(S) Sheet 1R/1 Of Ce (Af) Bangalore Zone And As Specified By Engineer-In-Charge. , M&L For Construction Of Soakage Well, Including Excavation In Any Type Of Soil/Ordinary Rock, Foundation In Plain Cement Concrete 1:3:6 Walls Of Honeycomb Masonry With Top Ring Of M-25 Concrete Including Intersepting Chamber Screen Chamber Made Of Fly Ash Brick Masonry In C:M 1:4, Rcc/Dwc Complete Filled With Brick Bats Of Size Of Size 1.80M Dia And 3.0 M Effective Depth All As Shown On Drawing No Cepz/2019/Td/03 Sheet No 1/2 And 2/2 And As Specified By Engineer-In-Charge. , S&F Of Grease Trap Of Capacity 500Lts Having Length X Width X Height Of 1150 X 939 X 765 Mm, To Be Installed Underground Complete All As Specified And As Directed By Engineer-In-Charge. Make : Supreme, Cat No Rlugtp0500gb And Equivalent Series As Approved By Engineer-In-Charge. Note: (A) Excavation, Plain Cement Concrete And Brickwork For Installing Grease Trap To Be Paid Separately Under Respective Items. , Cutting Existing 150 Mm Dia Di Pipe For Inserting Tee Of Size 150X150x50 Mm Including Lead Joint And Excavation Etc Complete All As Specified And Directed , M&L For Construction Of Valve Pit/Chamber Of Internal Dimensions 900 Mm X 900 Mm X 900 Mm, Using Plain Cement Concrete 1:4:8, Type D-2, Using 40Mm Graded Stone Aggregates For Foundation, 23 Cm Thick, Brick Wall Built In Cement Mortar (1:4) ,15 Mm Thick Rendering All Around The Brick Work In Cement Mortar (1:6), 75 Mm Thick Plain Cement Concrete (1:2:4) Type B-1 Using 20Mm Graded Stone Aggregates In Coping Including Necessary Form Work, 3 Coats Of White Wash On Rendered Surfaces And On Coping, 5 Mm Thick Mild Steel Top Sheet Cover With Frame Made Out Of 40X40x6 Mm Angle Iron, Locking Arrangement, Including Painting Of Steel Surface With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer All As Specified And As Directed. , Supply And Laying Double Walled Corrugated (Dwc) Hdpe Pipe Of Nominal Bore 110 Mm Including 90 Degree Bends With Coupler And Rubber Ring, Conforming To Is :16205 Part 24, 450 N Laid In Trenches For Cable Protection Complete, All As Specified And As Directed
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 7
Maharashtra View Result →
17.
Petroleum and Natural Gas #11418441 AOC
Tender For Various Works In View Of Compliance Of Mdt & M&I Checklist At Jaipur Bp-Part-A Shifting of 425 KG filling facility from cold repair shed to filling shed-Mechanical Work 2 Supply of 50 MM Pipe Seamless Sch 80 3 Supply of 50 MM WNRF Flange 300# 4 Fab & Erection with Primer/Painting of 50 MM Pipe Seamless Sch 80 5 Dismantling & Erection of 50 MM Ball Valve 300# after shifitng of 425 KG facility 6 Supply of Elbow 90 300# 50 NB Sch 80 7 Supply of 15NB Supply of GI Pipeline Heavy Grade for sprinkler System and QB System Extension for 425 KG loading/unloading fingure 8 Fab & Erection with Primer/Painting of 15 NB/ ½ “ Pipeline for sprinkler System and QB System Extension for 425 KG loading/unloading fingure 9 Supply of 40NB/1 ½ “ GI Pipeline Heavy Grade for sprinkler System Extension for 425 KG loading/unloading fingure 10 Supply of 25NB Supply of GI Pipeline Heavy Grade for sprinkler System and QB System Extension for 425 KG loading/unloading fingure 11 Supply of 25 MM 90 Degree Elbow 12 25NB Rigid Coupling Grooved 13 40NB Rigid Coupling Grooved 14 40x25NB CONCENTRIC REDUCER GROOVED 15 40x15NB (15 mm threaded outlet) U Bolt T 16 25x15NB (15 mm threaded outlet) U Bolt T 17 25 MM Equal Grooved Tee (Detector Line) 18 Fab & Erection with Primer/Painting of 40NB/ 1 ½ “ Pipeline for sprinkler System Extension for 425 KG loading/unloading fingure 19 Fab & Erection with Primer/Painting of 25NB/1 “ Pipeline for sprinkler System Extension for 425 KG loading/unloading fingure 20 Supply of QB 21 Supply of Sprinkler Nozzle 22 Supply & Erection of Structural Steel for providing support to QB and Sprinkler Line 23 Dismantling of 50 MM Pipe Seamless Sch 80 24 Supply of Metallic Gasket 50 MM Size 25 Supply of Copper Jumper for flange joint of 50 MM Pipe 26 Supply of 16 MM X 100 mm Stud Bolt 27 Part-B Shifting of 425 KG filling facility from cold repair shed to filling shed-Civil Work 28 RCC 1 Cement :1½ Coarse Sand: 3 29 Earth work in excavation i) All kinds of Soil 30 iii) Brick work in Cement mortar 1:4 ABOVE PLINTH& UP TO FLOOR V LEVEL 31 Providing and laying cement plaster onsurfaces iii) 15mm Cement plaster of mix 1:4 32 Supply of Steel reinforcement forR.C.C. including straightening,cutting,bending, placing in position andbinding all completeat all levels ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more 33 v) PCC 1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20mm 34 Demolishing cement concrete manually/by mechanical means i) 1:3:6 or richer mix 35 Demolishing R.C.C. work 36 Extra for cutting reinforcement bars 37 25 mm Mastic flooring in plant floor 38 Part-C Providing Purging Facility for 47.5 Kg cylinders 39 Installation of IOCL supplied Purging Unit 40 OEM Supervision Charges for Purging Machine installation 41 Supply of Seamless pipe 15 NB Sch 80 42 Fab & Erection with Primer/Painting of Seamless pipe 15 NB Sch 80 43 Part-D Providing Vent Line in LPG Pump House 44 Supply of Seamless pipe 25 NB Sch 80 45 Supply of Elboe 300# 90 deg 25 NB Sch 80 46 Supply of WNRF Flange 25 NB Sch 80 300# 47 Fab & Erection with Primer/Painting of Seamless pipe 25 NB Sch 80 48 Fab & Erection with Primer/Painting of Seamless pipe 15 NB Sch 80 49 Supply of Seamless pipe 15 NB Sch 80 50 Supply of Flange 15 NB Class 300 51 Supply of 90 D Elbow 15 NB Class 300 52 Supply of Gasket for 25 NB Flange Class 300 53 Supply of Gasket for 15 NB Flange Class 300 54 Supply of copper jumper 25 NB Flange 55 Supply of copper jumper 15 NB Flange 56 Supply fo Stud Bolt 14 MM with washer 57 Part-E Providing Vent Line for PAV in TLF and procurement of PAV 58 Supply of Seamless pipe 25 NB Sch 80 59 Supply of TEE 25 NB X 20 NB Sch 80 60 Supply of WNRF Flange 25 NB Sch 80 300# 61 Supply of Elboe 300# 90 deg 25 NB Sch 80 62 Supply of 25 NB Welded Socket Class 300 63 Fab & Erection with Primer/Painting of Seamless pipe 25 NB Sch 80 64 Supply of Blind Flange 25 NB Class 300 65 Supply of Gasket for 25 NB Flange Class 300 66 Supply of copper jumper 25 NB Flange 67 Supply fo Stud Bolt 16 MM with washer 68 Supply of 3/4 SS PAV/TSV 69 Part-F Procurement of LED lights for increasing illumination in critical area of plant 70 200 W LED NON FLP FLOOD LIGHT FOR HMT 71 60 W LED FLP LIGHT FOR SHED 72 Dismantling and shifting of 425 KG filling facility from Cold Repair Shed to Filling Shed 73 Visit of OEM for supervision and commissioning of 425 KG equipment’s after shifting at new location Please Enable Macros to View BoQ information
Contract Date: Jun 30, 2026 Contract Value : 25.88 Lakh
Boards / Undertakings / PSU No of Bidders 2
18.
Public Administrative Department #11405647 Technical Bid
Tender for Earth Work In Cutting Or In Embenkment In Moorum Or Soil Mixed With Kankar Or Gravel.Excacation To Be In The Form Of Reguler Pits Not Exceeding 1/2 Meter In Depth And E/W In Embankment To Be In 20 Cm Layers Including Ramming And Dressing The Surface To Required Levels And Slopes And Also Incuding 1.50 Meter Lifts And 30 M Lead. The Earth Form Cutting To Be Used In Making Embankment Or To Be Deposited As Soil Banks Within 30.00 Meters Distance As Directed By The Engineer In Charge. Pwd Schedule Item No. 253 (A) , Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Up To 1.5 Meter Transporting To Sites Spreading Grading To Require Slope And Compaction To Meet Requirement Of Table 300.1 & 300.2 With A Lead Up To 1000 Meter As Per Mord Technical Specification Clause 301.5 Mord Sepecification 301.5(I) S.No. 3.4(Ordinary Soil) , Granular Sub-Base/Base/Surface Course With Local Materials (Table 400.13) By Mix In Place Method Normal Construction Of Granular Sub-Base By Providing Local Material Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Once And Compacting With Smooth Wheel Roller To Achieve The Desired Density Complete As Per Clause 401.4 As Per Technical Specification Clause 408. , Gsb Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Smooth Wheel Roller To Achieve The Desired Density, Complete As Per Technical Specification Clause 401. , G-3 Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 3 As Per Technical Specification Clause 405. (A) By Machenical Means , Provinding And Laying Of Rubble Moulded Zig Zag Interlocking Concrete Block Pavements Having Thickness 80 Mm As Per Drawings And Technical Specification Clause 1504. , Earth Work In Excavation In Foundation In Ordanary Soil Lead Up To 30 M And Lift Up To 1.50 M I/C All Complete As Per Directed By Engineer In Charge.Si No. 251 , Sand Filling In Foundation For Stabilization Of Foundation Earth I/C All Complete As Per Directed By Engineer In Charge.Si No. 255 , Cement Concrete With 4Cm (1/2) Gauge Approved Stone Ballast, Approved Coarse Sand. Cement In The Proportion 12:6:1 Including Supply Of All Materials,Labour And Tools And Plants Etc. Required For Proper Completion Of The Work. As Per Si No. 273 , Brick Work With Class M-150 Bricks In Sand & Cement Mortar In Proportion Of 4:1In Foundation And Plinth I/C Supply Of All Material ,Labour ,T&P Etc Required For Proper Completion Of Work All Complete As S.I. No. 305 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clauses 802, 803, 1202 & 1203 (Pcc 1:2:4) , Plaster With Cement Mortar (1:4) 15Mm Thick On Brick Work In Subsructrure As Per Technical Specification Clauses 613.4 And 1204 , P/ Laying Reinforced Cement Concrete Pipe Np3 600 Mm Dia As Per Design In Single Row As Per Data Book special repair No 9.3 Mord Specification 1100 C , (Construction Of Rapta) Excavation In Foundation In Ordinary Soil ( Loam Clay Or Sand) Including Lift Up To 1.5 Meter (5Ft) And Lead Upto 30M (100Ft) And Including Filling,Watering & Ramming Of Excavated Earth Into The Trenches Or Into The Space Between The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Direction By The Engineer-In-Charge Upto A Distance Of 30M(100Ft) From The Foundation Trenches.S.I. No-251 , Sand Filling In Plinth Including Supply Of Necessary Quantity Of Sand From A Distance Not Exceeding 8Km (5 Miles) From The Side Of Work & Including Watering ,Dressing Etc. Rate To Include Cost Of All Materials,Labour And Tools & Plants,Etc. Required For Proper Completion Of The Work.S.I. No-255 , Cement Concrete With 40 Mm Gauge Approved Stone Ballast, Approved Coarse Sand. Cement In The Proportion 8:4:1 Including Supply Of All Materials,Labour And Tools And Plants Etc. Required For Proper Completion Of The Work. S.I.No. -281 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clauses 802, 803, 1202 & 1203 (Rcc 1:2:4) , Supplying, Fitting And Placing Hysd Bar Reinforcement (Fe 415) In Substructrue Complete As Per Drawing And Technical Specifications Clauses1002,1005, 1010 And 1202 , Stone Masonry In Cement Mortar For Substructure Complete As Per Drawing & Technical Specification Clauses 702.704, 1202 And 1204 (Rcr) , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clauses 802, 803, 1202 & 1203 (Rcc 1:2:4) , Supplying, Fitting And Placing Hysd Bar Reinforcement (Fe 415) In Substructrue Complete As Per Drawing And Technical Specifications Clauses1002,1005, 1010 And 1202 , P/ Laying Reinforced Cement Concrete Pipe Np3 1000 Mm Dia As Per Design In Single Row As Per Data Book special repair No 9.3 Mord Specification 1100 C , Stone Masonry In Cement Mortar For Substructure Complete As Per Drawing & Technical Specification Clauses 702.704, 1202 And 1204 (Rcr) , Granular Sub-Base/Base/Surface Course With Local Materials (Table 400.13) By Mix In Place Method Normal Construction Of Granular Sub-Base By Providing Local Material Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Once And Compacting With Smooth Wheel Roller To Achieve The Desired Density Complete As Per Clause 401.4 As Per Technical Specification Clause 408. , Cement Concrete With 4Cm (1/2) Gauge Approved Stone Ballast, Approved Coarse Sand. Cement In The Proportion 12 : 6 : 1 Including Supply Of All Materials,Labour And Tools And Plants Etc. Required For Proper Completion Of The Work. S.I.No. 273 , Plaster With Cement Mortar (1:4) 15Mm Thick On Brick Work In Subsructrure As Per Technical Specification Clauses 613.4 And 1204 , Plain Cement Concrete With 20Mm Stone Grit, Approved Coarse Sand & Cement In The Proportion Of 1:2:4 I/C Cost Of All Material Labour And T&P Etc. Required For All Proper Complection Of Work S.I. No. 279A , Supply And Fixing Of Sign Boad With Of Complete Or As Per Directed By Engineer Charges.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 5
Uttar Pradesh View Result →
19.
Public Administrative Department #11405646 Technical Bid
Tender for Earth Work In Cutting Or In Embenkment In Moorum Or Soil Mixed With Kankar Or Gravel.Excacation To Be In The Form Of Reguler Pits Not Exceeding 1/2 Meter In Depth And E/W In Embankment To Be In 20 Cm Layers Including Ramming And Dressing The Surface To Required Levels And Slopes And Also Incuding 1.50 Meter Lifts And 30 M Lead. The Earth Form Cutting To Be Used In Making Embankment Or To Be Deposited As Soil Banks Within 30.00 Meters Distance As Directed By The Engineer In Charge. Pwd Schedule Item No. 253 (A) , Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Up To 1.5 Meter Transporting To Sites Spreading Grading To Require Slope And Compaction To Meet Requirement Of Table 300.1 & 300.2 With A Lead Up To 1000 Meter As Per Mord Technical Specification Clause 301.5 Mord Sepecification 301.5(I) S.No. 3.4(Ordinary Soil) , Granular Sub-Base/Base/Surface Course With Local Materials (Table 400.13) By Mix In Place Method Normal Construction Of Granular Sub-Base By Providing Local Material Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Once And Compacting With Smooth Wheel Roller To Achieve The Desired Density Complete As Per Clause 401.4 As Per Technical Specification Clause 408. , Gsb Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Smooth Wheel Roller To Achieve The Desired Density, Complete As Per Technical Specification Clause 401. , G-3 Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 3 As Per Technical Specification Clause 405. (A) By Machenical Means , Provinding And Laying Of Rubble Moulded Zig Zag Interlocking Concrete Block Pavements Having Thickness 80 Mm As Per Drawings And Technical Specification Clause 1504. , Earth Work In Excavation In Foundation In Ordanary Soil Lead Up To 30 M And Lift Up To 1.50 M I/C All Complete As Per Directed By Engineer In Charge.Si No. 251 , Sand Filling In Foundation For Stabilization Of Foundation Earth I/C All Complete As Per Directed By Engineer In Charge.Si No. 255 , Cement Concrete With 4Cm (1/2) Gauge Approved Stone Ballast, Approved Coarse Sand. Cement In The Proportion 12:6:1 Including Supply Of All Materials,Labour And Tools And Plants Etc. Required For Proper Completion Of The Work. As Per Si No. 273 , Brick Work With Class M-150 Bricks In Sand & Cement Mortar In Proportion Of 4:1In Foundation And Plinth I/C Supply Of All Material ,Labour ,T&P Etc Required For Proper Completion Of Work All Complete As S.I. No. 305 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clauses 802, 803, 1202 & 1203 (Pcc 1:2:4) , Plaster With Cement Mortar (1:4) 15Mm Thick On Brick Work In Subsructrure As Per Technical Specification Clauses 613.4 And 1204 , Earth Work In Excavation In Foundation In Ordanary Soil Lead Up To 30 M And Lift Up To 1.50 M I/C All Complete As Per Directed By Engineer In Charge.Si No. 251 , Sand Filling In Foundation For Stabilization Of Foundation Earth I/C All Complete As Per Directed By Engineer In Charge.Si No. 255 , Cement Concrete With 4Cm (1/2) Gauge Approved Stone Ballast, Approved Coarse Sand. Cement In The Proportion 1:4:8 Including Supply Of All Materials,Labour And Tools And Plants Etc. Required For Proper Completion Of The Work. (S.I.No. 281) , Stone Masonry In Cement Mortar For Substructure Complete As Per Drawing & Technical Specification Clauses 702.704, 1202 And 1204 (Rcr) , Plaster With Cement Mortar (1:4) 15Mm Thick On Brick Work In Subsructrure As Per Technical Specification Clauses 613.4 And 1204 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clauses 802, 803, 1202 & 1203 (Pcc 1:2:4) , Supplying, Fitting And Placing Hysd Bar Reinforcement (Fe 415) In Substructrue Complete As Per Drawing And Technical Specifications Clauses1002,1005, 1010 And 1202 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clauses 802, 803, 1202 & 1203 (Rcc 1:2:4) , Supply And Fixing Of Sign Boad With Of Complete Or As Per Directed By Engineer Charges.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
20.
Public Administrative Department #11405645 Technical Bid
Tender for Gsb Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Smooth Wheel Roller To Achieve The Desired Density, Complete As Per Technical Specification Clause 401. , G-3 Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 3 As Per Technical Specification Clause 405. (A) By Machenical Means , Provinding And Laying Of Rubble Moulded Zig Zag Interlocking Concrete Block Pavements Having Thickness 80 Mm As Per Drawings And Technical Specification Clause 1504. , Earth Work In Excavation In Foundation In Ordanary Soil Lead Up To 30 M And Lift Up To 1.50 M I/C All Complete As Per Directed By Engineer In Charge.Si No. 251 , Sand Filling In Foundation For Stabilization Of Foundation Earth I/C All Complete As Per Directed By Engineer In Charge.Si No. 255 , Cement Concrete With 4Cm (1/2) Gauge Approved Stone Ballast, Approved Coarse Sand. Cement In The Proportion 8:4:1 Including Supply Of All Materials,Labour And Tools And Plants Etc. Required For Proper Completion Of The Work. As Per Si No. 281 , Brick Work With Class M-150 Bricks In Sand & Cement Mortar In Proportion Of 4:1In Foundation And Plinth I/C Supply Of All Material ,Labour ,T&P Etc Required For Proper Completion Of Work All Complete As S.I. No. 305 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clauses 802, 803, 1202 & 1203 (Pcc 1:2:4) , Plaster With Cement Mortar (1:4) 15Mm Thick On Brick Work In Subsructrure As Per Technical Specification Clauses 613.4 And 1204 , Supplying, Fitting And Placing Hysd Bar Reinforcement (Fe 415) In Substructrue Complete As Per Drawing And Technical Specifications Clauses1002,1005, 1010 And 1202 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clauses 802, 803, 1202 & 1203 (Rcc 1:2:4) , Supply And Fixing Of Sign Boad With Of Complete Or As Per Directed By Engineer Charges.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
21.
Public Administrative Department #11405643 Technical Bid
Tender for Earth Work In Cutting Or In Embenkment In Moorum Or Soil Mixed With Kankar Or Gravel.Excacation To Be In The Form Of Reguler Pits Not Exceeding 1/2 Meter In Depth And E/W In Embankment To Be In 20 Cm Layers Including Ramming And Dressing The Surface To Required Levels And Slopes And Also Incuding 1.50 Meter Lifts And 30 M Lead. The Earth Form Cutting To Be Used In Making Embankment Or To Be Deposited As Soil Banks Within 30.00 Meters Distance As Directed By The Engineer In Charge. Pwd Schedule Item No. 253 (A) , Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Up To 1.5 Meter Transporting To Sites Spreading Grading To Require Slope And Compaction To Meet Requirement Of Table 300.1 & 300.2 With A Lead Up To 1000 Meter As Per Mord Technical Specification Clause 301.5 Mord Sepecification 301.5(I) S.No. 3.4(Ordinary Soil) , Granular Sub-Base/Base/Surface Course With Local Materials (Table 400.13) By Mix In Place Method Normal Construction Of Granular Sub-Base By Providing Local Material Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Once And Compacting With Smooth Wheel Roller To Achieve The Desired Density Complete As Per Clause 401.4 As Per Technical Specification Clause 408. , Gsb Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Smooth Wheel Roller To Achieve The Desired Density, Complete As Per Technical Specification Clause 401. , G-3 Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 3 As Per Technical Specification Clause 405. (A) By Machenical Means , Provinding And Laying Of Rubble Moulded Zig Zag Interlocking Concrete Block Pavements Having Thickness 80 Mm As Per Drawings And Technical Specification Clause 1504. , Earth Work In Excavation In Foundation In Ordanary Soil Lead Up To 30 M And Lift Up To 1.50 M I/C All Complete As Per Directed By Engineer In Charge.Si No. 251 , Sand Filling In Foundation For Stabilization Of Foundation Earth I/C All Complete As Per Directed By Engineer In Charge.Si No. 255 , Cement Concrete With 4Cm (1/2) Gauge Approved Stone Ballast, Approved Coarse Sand. Cement In The Proportion 12:6:1 Including Supply Of All Materials,Labour And Tools And Plants Etc. Required For Proper Completion Of The Work. As Per Si No. 273 , Brick Work With Class M-150 Bricks In Sand & Cement Mortar In Proportion Of 4:1In Foundation And Plinth I/C Supply Of All Material ,Labour ,T&P Etc Required For Proper Completion Of Work All Complete As S.I. No. 305 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clauses 802, 803, 1202 & 1203 (Pcc 1:2:4) , Plaster With Cement Mortar (1:4) 15Mm Thick On Brick Work In Subsructrure As Per Technical Specification Clauses 613.4 And 1204 , Stone Masonry In Cement Mortar For Substructure Complete As Per Drawing & Technical Specification Clauses 702.704, 1202 And 1204 (Rcr) , Plaster With Cement Mortar (1:4) 15Mm Thick On Brick Work In Subsructrure As Per Technical Specification Clauses 613.4 And 1204 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clauses 802, 803, 1202 & 1203 (Pcc 1:2:4) , Supplying, Fitting And Placing Hysd Bar Reinforcement (Fe 415) In Substructrue Complete As Per Drawing And Technical Specifications Clauses1002,1005, 1010 And 1202 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clauses 802, 803, 1202 & 1203 (Rcc 1:2:4) , Supply And Fixing Of Sign Boad With Of Complete Or As Per Directed By Engineer Charges.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
22.
Public Administrative Department #11405641 Technical Bid
Tender for Earth Work In Cutting Or In Embenkment In Moorum Or Soil Mixed With Kankar Or Gravel.Excacation To Be In The Form Of Reguler Pits Not Exceeding 1/2 Meter In Depth And E/W In Embankment To Be In 20 Cm Layers Including Ramming And Dressing The Surface To Required Levels And Slopes And Also Incuding 1.50 Meter Lifts And 30 M Lead. The Earth Form Cutting To Be Used In Making Embankment Or To Be Deposited As Soil Banks Within 30.00 Meters Distance As Directed By The Engineer In Charge. Pwd Schedule Item No. 253 (A) , Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Up To 1.5 Meter Transporting To Sites Spreading Grading To Require Slope And Compaction To Meet Requirement Of Table 300.1 & 300.2 With A Lead Up To 1000 Meter As Per Mord Technical Specification Clause 301.5 Mord Sepecification 301.5(I) S.No. 3.4(Ordinary Soil) , Granular Sub-Base/Base/Surface Course With Local Materials (Table 400.13) By Mix In Place Method Normal Construction Of Granular Sub-Base By Providing Local Material Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Once And Compacting With Smooth Wheel Roller To Achieve The Desired Density Complete As Per Clause 401.4 As Per Technical Specification Clause 408. , Gsb Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Smooth Wheel Roller To Achieve The Desired Density, Complete As Per Technical Specification Clause 401. , G-3 Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 3 As Per Technical Specification Clause 405. (A) By Machenical Means , Provinding And Laying Of Rubble Moulded Zig Zag Interlocking Concrete Block Pavements Having Thickness 80 Mm As Per Drawings And Technical Specification Clause 1504. , Earth Work In Excavation In Foundation In Ordanary Soil Lead Up To 30 M And Lift Up To 1.50 M I/C All Complete As Per Directed By Engineer In Charge.Si No. 251 , Sand Filling In Foundation For Stabilization Of Foundation Earth I/C All Complete As Per Directed By Engineer In Charge.Si No. 255 , Cement Concrete With 4Cm (1/2) Gauge Approved Stone Ballast, Approved Coarse Sand. Cement In The Proportion 12:6:1 Including Supply Of All Materials,Labour And Tools And Plants Etc. Required For Proper Completion Of The Work. As Per Si No. 273 , Brick Work With Class M-150 Bricks In Sand & Cement Mortar In Proportion Of 4:1In Foundation And Plinth I/C Supply Of All Material ,Labour ,T&P Etc Required For Proper Completion Of Work All Complete As S.I. No. 305 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clauses 802, 803, 1202 & 1203 (Pcc 1:2:4) , Plaster With Cement Mortar (1:4) 15Mm Thick On Brick Work In Subsructrure As Per Technical Specification Clauses 613.4 And 1204 , Earth Work In Excavation In Foundation In Ordanary Soil Lead Up To 30 M And Lift Up To 1.50 M I/C All Complete As Per Directed By Engineer In Charge.Si No. 251 , Sand Filling In Foundation For Stabilization Of Foundation Earth I/C All Complete As Per Directed By Engineer In Charge.Si No. 255 , Cement Concrete With 4Cm (1/2) Gauge Approved Stone Ballast, Approved Coarse Sand. Cement In The Proportion 8:4:1 Including Supply Of All Materials,Labour And Tools And Plants Etc. Required For Proper Completion Of The Work. As Per Si No. 281 , Stone Masonry In Cement Mortar For Substructure Complete As Per Drawing & Technical Specification Clauses 702.704, 1202 And 1204 (Rcr) , Plaster With Cement Mortar (1:4) 15Mm Thick On Brick Work In Subsructrure As Per Technical Specification Clauses 613.4 And 1204 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clauses 802, 803, 1202 & 1203 (Pcc 1:2:4) , Supplying, Fitting And Placing Hysd Bar Reinforcement (Fe 415) In Substructrue Complete As Per Drawing And Technical Specifications Clauses1002,1005, 1010 And 1202 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clauses 802, 803, 1202 & 1203 (Rcc 1:2:4) , P/ Laying Reinforced Cement Concrete Pipe Np3 600 Mm Dia As Per Design In Single Row As Per Data Book special repair No 9.3 Mord Specification 1100 C , Supply And Fixing Of Sign Boad With Of Complete Or As Per Directed By Engineer Charges.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
23.
Public Administrative Department #11405639 Technical Bid
Tender for Gsb Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Smooth Wheel Roller To Achieve The Desired Density, Complete As Per Technical Specification Clause 401. , G-3 Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 3 As Per Technical Specification Clause 405. (A) By Machenical Means , Cement Concrete Pavement Construction Of Un-Reinforced, Dowel Jointed At Expansion And Construction Joint Only, Plain Cement Concrete Pavement, Thickness As Per Design, Over A Prepared Sub Base, With 43 Grade Cement Or Any Other Type As Per Clause 1501.2.2 M30 (Grade), Coarse And Fine Aggregates Conforming To Is:383, Maximum Size Of Coarse Aggregate Not Exceeding 25 Mm, Mixed In A Concrete Mixer Of Not Less Than 0.2 Cum Capacity And Appropriate Weigh Batcher Using Approved Mix Design, Laid In Approved Fixed Side Formwork (Steel Channel, Laying And Fixing Of 125 Micron Thick Polythene Film, Wedges, Steel Plates Including Levelling The Formwork As Per Drawing), Spreading The Concrete With Shovels, Rakes, Compacted Using Needle, Screed And Plate Vibrators And Finished In Continuous Operation Including Provision Of construction And Expansion, Construction Joints, Applying Debonding Strips, Primer, Sealant, Dowel Bars, Near Approaches To Bridge/Culvert And Construction Joints, Admixtures As Approved, Curing Of Concrete Slabs For 14-Days, Using Curing Compound (Where Specified) And Water Finishing To Lines And Grade As Per Drawing And Technical Specification Clause 1501 , Cement Concrete With 4Cm (1/2) Gauge Approved Stone Ballast, Approved Coarse Sand. Cement In The Proportion 1:4:8 Including Supply Of All Materials,Labour And Tools And Plants Etc. Required For Proper Completion Of The Work. (S.I.No. 281) , Class-150 Brick Work In 1:4 Cement And Fine Sand Of 1.25 Fineness Modulus Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And Tools And Plants Etc. Required For Proper Completion Of The Work. (S.I.No. 305) , Plaster With Cement Mortar (1:4) 15Mm Thick On Brick Work In Subsructrure As Per Technical Specification Clauses 613.4 And 1204 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clauses 802, 803, 1202 & 1203 (Pcc 1:2:4) , Supplying, Fitting And Placing Hysd Bar Reinforcement (Fe 415) In Substructrue Complete As Per Drawing And Technical Specifications Clauses1002,1005, 1010 And 1202 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clauses 802, 803, 1202 & 1203 (Rcc 1:2:4) , Supply And Fixing Of Sign Boad With Of Complete Or As Per Directed By Engineer Charges.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 13.46 Lakh
Government Departments No of Bidders 1
Contract Date: Ref. Documents Contract Value : 15.33 Lakh
Government Departments No of Bidders 1
26.
Defence #11392755 Technical Bid
Tender for Material And Labour For Plain Cement Concrete 1:4:8 Type D-2 (Using 40Mm Graded Stone Aggregate) As In Foundation ,Filling And Mass Concrete Complete All As Specified And Directed . , Material And Labour For Plain Cement Concrete 1:2:4 Type B1 (Using 20Mm Graded Stone Aggregate) As In Cills, Steps; Seismic And Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets And Railings Upto 60 Cm In Height, Copings, Kneelers, Apex Stones, Bed Plates, Kerbs Not Provided For, Water Troughs And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating Etc , Complete All As Specified And As Directed. , Material And Labour For Plain Cement Concrete 1:3:6 Type C-1 Using (20Mm Graded Stone Aggregate) As In Bed Blocks For Hold Fast,Coping Errection Of Posts Etc Complete All As Specified And Directed. , Material And Labour Reinforced Cement Concrete Nominal Mix (1:1.5:3) Type A1 (Using 20Mm Graded Stone Aggregate) On Slabs Supported On Walls , Beams And Columns In Floors , Roofs,Landings,Balconies, Canopies Deck Slabs, And In Shelves And The Like Complete All As Specified And As Directed. , Material And Labour Reinforced Cement Concrete Nominal Mix (1:1.5:3) Type A1 (Using 20Mm Graded Stone Aggregate) Chajja, Facia Etc And The Like Complete All As Specified And As Directed. , Material And Labour For Plain Cement Concrete 1:3:6 Type C0 (Using 12.5Mm Graded Stone Aggregate) As In Filling The Hollow Portion Of Steel Frame Complete All As Specified And Directed. , Supply Only Water Proofing Compound. , Material And Labour For Brick Work With Sub Class B Bricks, Straight Or Curved On Plan Exc 6M Mean Radius Built In Cm 1:4 Complete All As Specifed And Directed. , Material And Labour For Brick Work With Sub Class B Bricks, Straight Or Curved On Plan Exc To Any Radius In Half Brick Thick Walls Built In Built In Cm 1:4 Complete All As Specifed And Directed , Material And Labour For Form Work On Flat Sides To Soffits Of Suspended Roof Slabs Not Exc 200 Mm Thick (Horizontal Or Sloping), Walls , Beams And Columns In Floors,Landings,Balconies, Canopies Deck Slabs, And In Shelves Rough Finished Surface Of Concrete All As Specified And As Directed. , Material And Labour For Form Work On Flat Sides To Chajja, Fins, Louvers, Fascia Etc Rough Finished Surface Of Concrete All As Specified And As Directed. , Refixing Wooden Or Aluminium Door Shutters Of Any Description Exceeding 1 Sqm But Not Exceeding 2 Sqm Each In The Same Opening After Taking Down, Easing And Adjusting Including Refixing Builders Hardware, Glass Etc As Required And Renewal Of Unserviceable Screws Concrete All As Specified And As Directed. , Supply And Fix For 2Nd Class Hardwood Plain, Solid, Straight Chowkhats And Frames, Wrought, Framed Rebated On The Solid, Rounded Or Chamfered, Put Together With Glue, Pinned At Joints Complete All As Specified And Directed. , Supply And Fix Factory Made 30 Mm Thick Flush Shutter Solid Core Construction With Block Board Core & Plywood Face Panels Commercial Type On Both Sides Incl 5Mm Thick Teakwood Leaping Alround Complete All As Specified And Directed. , Supply And Fix 2Nd Class Hardwood Factory Made Door, 35 Mm Thick, Glazed And Skeleton Shutters, Open Rebated And Prepated To Receive Glass Gauze Etc (With Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Materials And Revated Sash Bars Any Number , Edges Of Framing Plain Chemfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass In Door Etc Or Provided With Styles And Rails As Specified In Ssr Part 1 Section 8, Clause 8.20 (A) Complete All As Specified And Directed. , Supply And Fix 2Nd Class Hardwood Glazed And Skeleton Window Shutter 30Mm Thick, Divided Into Squares, With Plain, Chamfered Or Rounded, Mitred And Rebated Sash Bars, Any Numbers, To Receive Glass, Gauze, Etc Or Provided With Styles And Rails As Specified In Ssr Part 1 Section 8, Clause 8.20 (B) Complete All As Specified And Directed. , Supply And Fix Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S Square Tube, Supplying & Fixing In Opening As Per Specification & Drawing Complete All As Specified And Directed , Supply And Fix Factory Made Solid Panel Pvc Door Shutter 30Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails, M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc C Channel Heaving A Pvc Sheet Strip Of 20Mm Width Suck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Plain Colour Pvc Sheet To Be Fitted In The M.S Frame Wedded/ Sealed To The Stiles, & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Supplying & Fixing In The Frame At Site As Per Specification & Drawing Complete All As Specified And Directed , Supply And Fix Stainless Steel Wire Cloth 0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm And Fixed With Stainless Steel Stapple Etc Concrete All As Specified And As Directed. , Supply And Fix 300Mm Long Aluminium Alloy Anodised , Plate Type ,Stove Enameled Black , With Bright Bolt Not Less Than 12Mm Dia With And Incl Minimum Of 6 Bolts And Nuts ,Four On Bolt Plate And Two On Staple Concrete All As Specified And As Directed. , Supply And Fix Stainless Steel Butt Hinges Cold Rolled Meium Weight Of Size 100Mm Etc Complete All As Specified And Directed. , Supply And Fix Stainless Steel Butt Hinges Cold Rolled Meium Weight Of Size 75Mm Etc Complete All As Specified And Directed. , Supply And Fix Aluminium Alloy Handles 150 Mm Long Fabricated Type Complete All As Specified And Directed. , Supply And Fix Aluminium Alloy Handles 100 Mm Long Fabricated Type Complete All As Specified And Directed. , Supply And Fix Aluminium Anodised Barrel Tower Bolts Of Extruded Section 200 Mm Long Complete All As Specified And Directed. , Supply And Fix Aluminium Anodised Barrel Tower Bolts Of Extruded Section 150 Mm Long Complete All As Specified And Directed. , Supply And Fix 300Mm Long Aluminium Alloy Anodised Sliding Door Bolts , With Hasp Staple (Bolt Type) And Fixing Clips Of Sheet Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast-Aluminium Ally Complete All As Specified And Directed. , Supply And Fix Powder Coated Three Track Aluminium Sliding Window With Approved Make Of Following Extruded Section Of Anodised Glazed Shutter As Per Standard Engineering Practices Including All Other Accessories Complete Including 4.00 Mm Thick Tinted Glass Panes, Rubber Beading, Mosquito Proofing, Locking System Etc. Complete All As Specified And As Directed. (Refer Jindal Cat M-2014 ) Aluminium Sections : A Series (I) Shutter Bottom & Top :- 37.50 X 15 X 1.3 Mm Thick (20690) (Ii) Shutter Interlock :- 37.50 X 23 X 1.3 Mm Thick (20689) (Iii) Shutter Side (Handle) :- 37.50 X 23 X 1.3 Mm Thick (20689) (Iv) Frame Bottom :- 75 X 26 X 1 Mm Thick (20671) (V) Frame Top And Sides :- 75 X 26 X 1 Mm Thick (20672) , Supply And Fix Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) Or Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/Neoprene Gasket Required (Fittings Shall Be Paid For Separately) With Extruded Built Up Standard Tubular Material And Labour Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is:1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling, C.P. Brass/ Stainless Steel Screws All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge , Material And Labour For Structural Steel Work With Rolled Mild Steel Sections As In Main And Cross Beams, Hip And Jack Rafters, Purlins Where Connected To Common Rafters And Running Rails And Guides For Sliding Doors; Fixed With Angle Cleats Or Other Connecting Plates Conforming To Fe-290 (Gde E-165) Quality A Complete All As Specified And Directed. , Supply And Fix Pressed Steel Frames For Doors Of Size 125Mmx60mmx1.25Mm With Double Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc.Complete All As Specified And Directed. , Supply And Fix Pressed Steel Frames For Doors Of Size 105Mmx60mmx1.25Mm With Single Rebate Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc.,Complete All As Specified And Directed. , Material And Labour For Mild Steel Conforming To Fe 410-0 Or Fe 310-0 In Framed Work Such As Grills, Gratings, Etc With Ends Of Bars Shouldered And/Or Riveted Or Forged Into Spikes; Framed Guard Bars; Ladders; Railings And Similar Work Complete All As Specified And Directed. , Supply And Fix Box Type Steel Windows With Side Hung Shutters Both Mosquito Proof And Glazed Shutter Including Projecting Type Hinges With Steel Handle And Steel Peg Stay With Glazing Bars And 12 Mm Square Bar Or Ground Bar Of Approved Design Welded To Steel Window Frame Dovetailed Or Welded Complete All As Specified And As Directed. , Supply And Fix Steel Ventilators With Top Hung Shutter Including Hinges, Steel Peg Stay, Complete All As Specified And As Directed. , Material And Labour For Mild Steel Tmt Bars 10 Mm Dia And Over Cut To Length, Bent To Shape As Required Including Cranking, Bending And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9 Mm Dia As In Reinforcement Bar Complete All As Specified And As Directed. , Repairing Of Existing Mild Steel Rolling Shutter Of Any Description Or Any Size Including Replacement Of Damaged Mild Steel Laths, Repairing/ Replacement Of Side Guide Channels, Pipe Shaft, Springs, Ball Bearings, Locking Arrangements, Welding Work, Alingment And Smooth Operation, Including Necessary Nuts, Bolts, Oiling And Greasing, Complete All As Specified And As Directed. , Supply And Fix Pre-Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Trapezoidal Profile Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Patteren Corresponding To Is 15965: 2012 Of Durability Class 3, Atmospheric Classification Category 3,Four (4) Coating Class Az 150 Of An Approved Colour Havingb Yield Strength Of 550Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Specified And As Directed , Material And Labour For Pre- Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Plain Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Pattern Corresponding To Is 15965 : 2012 Of Durability Class 3, Atmospheric Classification Category 3, Coating Class Az 150 Of An Approved Colour Having Yield Strength Of 550 Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Specified Complete All As Specified And As Directed. Note: To Be Executed For Provision Of Ridges And Hips. , Material And Labour For 12 Mm Thick Prelaminated Particle Board Bwp Type Melamine Finished (Both Side) For Fixing The Panel Of The Partition/Door Including Necessary Fittings, Gusket, Angle Cleats, Screw Etc Complete All As Specified And Directed. , Supply And Fix Suspended False Ceiling Using E-Grid 2430, 180 Gsm (Exposed Ceiling Suspension System ) Of Grid Size 600Mmx600 Mm With Main Runner 32 Mm X 24 Mm And Wall Angle 24Mm X 24Mm Using 4Mm Thick High Pressure Stean Crude Everest Non Asbestos Fiber Cement Plain Board (E-Board Classic) In & Including A Grid Of Gi System Duly Suspended With 4Mm Dia Gi Wire Hanger Fixed With Steel Dash Fasteners Or Iron Purlin From The Roof With Adjustment Clip Providing Positions For Light Fixtures,Air Conditioning Diffuser And Ducts ,Sprinkler ,Smoke Detectors Etc.The Main Runners To Be Secured To Structural Soffits By Hanger @ 1220 Mm Maximum C/C. The Last Hanger At The End Of Each Main Runner Should Not Be Placed At More Than 450Mm From The Adjucent Wall,Flush Fitting 1220 Mm Cross Tee To Be Interlocked Between Main Runners @ 610Mm C/C,So As To Form 600Mm X 600 Mm Grid Complete All As Specified And Directed. , Material And Labour For Heavy Duty Parking Tiles Size 300Mm X 300 Mm X 10 Mm Thick White Cement And Pigments Of Approved Maked Jointed With Cement Slurry And Pointed With White Cement Mixed With Pigment To Match With The Tiles Over And Including Screed Bed Of 15 Mm Thick In Cement Mortar (1:4) Complete All As Specified And Directed. , Material And Labour For Non Skid, Ceramic Coloured Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm Thick, In Floor, Shelves Etc, Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match The Shade Of Tiles Over And Including 15Mm Thick Screed Bed Or Bedding Layer In Cement Mortar 1:4 Complete All As Specified And Directed. , Material And Labour For Non Skid, Ceramic Coloured Tiles 7 To 8Mm Thick Area Of Each Tile Exceeding 0.18 And N.Exc 0.38 Sqm In Floor, Shelves Etc, Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match The Shade Of Tiles Over And Including 15Mm Thick Screed Bed Or Bedding Layer In Cement Mortar 1:4 Complete All As Specified And Directed. , Material And Labour For Non Skid, Ceramic Coloured Tiles 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Exc 0.18 And N.Exc 0.38 Sqm , In Skirting Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Including 10Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed. , Material And Labour For Coloured/ Printed Glazed Ceramic Tiles 7Mm Thick Not Exc 0.15 Sqm In Area In Vertical Surfaces I.E. Dado, Skirting, Etc., Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match The Tiles, Laid Over And Including Screed Or Screed Bed 10Mm Thick In Cement Mortar 1:4, Complete All As Specified And As Directed. , Material And Labour For 75Mm Thick Cement Concrete 1:3:6 Type C-2 (Using 40Mm Graded Stone Aggregate ) As In Plinth Protection Complete All As Specified And Directed. , Material And Labour For 100Mm Thick Cement Concrete 1:2:4 Type B-2 (Using 40Mm Graded Stone Aggregate) As In Flooring, Hardstanding Complete All As Specified And Directed. , Material And Labour For 100 Mm Thick Plain Cement Concrete 1:4:8 Type D2 (Using 40Mm Graded Stone Aggregate) In Foundation, Floor Etc Complete All As Specified And Directed. , Material And Labour For 25 Mm Thick Plain Cement Concrete (1:2:4) Type B0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Floor Finished Rough To Receive Tiles Complete All As Specified And As Directed. , Material And Labour For 10Mm Thick Rendering On Other Than Fair Faces Of Brick Wall In Cm 1:6 Finished Even And Smooth With Out Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Rendering 15Mm Thick External In Cm 1:4 On Fair Faces Of Brick/Concrete Surfaces Finished Even And Smooth Without Using Exta Cement With Using Wpc @3% By The Wt Of Cement. Wpc Shall Be Measured And Paid Seperately. , Material And Labour For 5Mm Thick Rendering On Fair Faces Of Brick Or Concrete Surface In Cm 1:3 Finished Even And Smooth With Out Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Rendering 15Mm Thick External In Cm 1:4 On Fair Faces Of Brick/Concrete Surfaces Finished Even And Smooth Without Using Exta Cement Complete All As Specified And Directed. , Material And Labour For Preparation Of Newly Plastered Surface Of Wall And Applying A Coat Of Alkali Primer And Two Coats Of Acrylic Distemper Complete All As Specified And Directed , Material And Labour For Preparation Of Newly Plastered Surface Of Walls And Applying Two Coat Of Acrylic Exterior Weather Coat Paint (Weather Proof Paint With Quality Of Dust Guard, Anti Algal And Anti Fungal Paint With Minimum 05 Years Performance Warranty, Over A Coat Of Approved Primer Over 1Mm Thick Water Proof Putty Of Same Manufacturer Complete All As Specified And Directed. , Material And Labour For Preparing Of Newly Plastered Wall Surface And Applying Two Coats Of Cement Base Paint Over A Coat Of Primer Complete All As Specified And Directed. , Material And Labour For Preparing Of Newly Plastered Ceiling Surface And Applying Three Coats Of White Wash Complete All As Specified And Directed. , Material And Labour For 4Mm Thick Sheet Glass Ordinary Quality And Glazing With Oil Putty In Square N-Exc 0.5 Sqm In Each Pane Complete All As Specified And Directed. , Material And Labour For 4Mm Thick Sheet Glass Figured Glass, Pin Head Type And Glazing With Oil Putty In Square N-Exc 0.5 Sqm In Each Pane Complete All As Specified And Directed. , Material And Labour For Preparation And Applying Two Coats Of Synthetic Enamel Paint On New Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Over A Coat Of Pink Primer Complete All As Specified And Directed. , Material And Labour For Preparation Of Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide On New Steel Surfaces , Over 10 Cm In Width Or Grith Not Other Wise Described Complete All As Specified And Directed. , Supply And Fix Steel Water Tubes, Medium Grade, Isi Marked, Galvanised, 15Mm Bore With All Fittings, Fixed To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , Supply And Fix Steel Water Tubes, Medium Grade, Isi Marked, Galvanised, 20 Mm Bore With All Fittings, Fixed To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , Supply And Fix In Repair Vitreous China Wash Hand Basin White, Flat Back Of Size 550Mmx400mm Fixed On And Including Cast Iron Cantilever Bracket, 32Mm Dia Pvc Waste Coupling And 32 Mm Dia Pvc Waste Pipe Including Fixing Of Tap, Waste Fitting Etc Complete All As Specified And Directed. , Supply And Fix In Repair Bib Taps With Wall Flange 15Mm Bore, Fancy Type, Quarter/Half Turn, Brass Chromium Plated, Long Body With Capstan Head And Cup Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Including Accessories Complete All As Specified And Directed. , Supply And Fix In Repair 125 Mm Dia, Chromium Plated Swivel Type Shower Rose With 195 Mm Long Chromium Plated Shower Arm And Wall Flange Suitable For Fixing 15Mm Bore Iron Pipe All As Specified And Directed , Supply And Fix In Repair Bath Wall Mixer With 15Mm Bore (Dia) Spout, Chromium Plated With Long Bend Pipe For Over Head Shower Including Flanges Complete All As Specified And As Directed. , Supply And Fix In Repair Pillar Taps, Cast Copper Alloy, With Capstan Heads, Fancy Type, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered ‘Hot Or ‘Cold With Long Screwed Shanks And Fly Nuts, Screwed For Iron Pipe 15 Mm Bore Complete All As Specified And Directed. , Supply And Fix In Repair Cp Stop Valve/Angle Valve 15 Mm Bore, Fancy Type Cromimum Plated With Long Shank And Cup (Concealed Type), High Pressure Crutch Or Butter Fly Handle Screwed Both Ends Screwed For Iron Pipe Or For Unions Complete All As Specified And Directed. , Supply And Fix In Repair Rotational Moulded,Multilayer Hdpe Water Storage Tank Of 1000 Ltrs Capacity(Cylindrical Vertical With Closed Top) Isi Marked Fixed In Position On Existing Places With Fittings And Refixing Of Inlet, Outlet & Overflow Pipe Etc, Complete All As Specified And As Directed. , Supply And Fix In Repair Rotational Moulded,Multilayer Hdpe Water Storage Tank Of 500 Ltrs Capacity(Cylindrical Vertical With Closed Top) Isi Marked Fixed In Position On Existing Places Complete And Refixing Of Inlet, Outlet & Overflow Pipe Etc, Complete All As Specified And As Directed. , Supply And Fix Ball Valves 20Mm Bore Dia Of Pipe High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe And Fixed (Minimum Weight 20Mm-210Gms). , Supply And Fix In Repair 600Mmx450mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers , Supply And Fix In Repair Pvc Valve, Symphonic Action Type, Flushing Cistern 10 Liters Capacity Low Level White With Inlet ,Ball Valve ,Float And Handle Including Brocket Complete All As Specified And As Directed. , Supply And Fix 110Mm Dia Pvc (Swr) Pipes, Presure Rate Having 6 Kgf Single Socketed In Any Length With Rubber Ring Joints And Laid In Trenches As In Waste/Soil Pipe Complete All As Specified And As Directed. , Supply And Fix 110Mm Dia Bore Pvc (Swr) Pipes Single Socketed, In Any Length With Rubber Ring Joints, Fixed To Walls Complete All As Specified And As Directed. , Supply And Fix 75Mm Dia Bore Pvc (Swr) Pipes Single Socketed, In Any Length With Rubber Ring Joints, Fixed To Walls Or Floor Complete All As Specified And As Directed. , Supply And Fix Pvc (Swr) Bends With Access Door Any Radius, 75 Mm Bore Complete. , Supply And Fix Pvc (Swr) Bends With Access Door Any Radius, 110 Mm Bore Complete. , Supply And Fix, In Repair Vitreous China Wash Down Water Closet Of Orissa Pattern Size 580 X 440 Mm White With Integral Foot Rests Including Removing Filled Lean Concrete From Sunken Portion And Putting Of Lean Concrete After Treatment Of Sunken Slab, Connection To Trap And To Flushing Pipe Etc Complete And Making Good To Floor Complete All As Specified And Directed. , Supply And Fix In Repair Vitreous China Wash Down Water Closed Pan (Pedestal Pattern) With P Or S Trap White, Including Connection To Trap And Cistern, Flush Pipe Including White Plastic Water Closet Seat Cover, Closed Pattern With Flat Bottom & Cover And Aluminium Anodised Hinging Device And Making Good Disturbed Surface Of Floor Complete All As Specified And Directed. , Supply And Fix In Repair Plastic Water Closet Seat Cover, White, Closed Pattern With Flat Bottom & Cover And Aluminium Anodised Hinging Device And Fixed Wc Pan Complete All As Specified And Directed. , Dismantling Plain Or Corrugated Steel Sheeting Any Gauge Thickness Including Nanital Or Similar Pattern Roof Covering , Taking Up Or Down 20 Mm Bore Steel Water Tubing And Connections Including Cleaning For Refixing Or Removal To Store Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Bore Steel Water Tubing And Connections Including Cleaning For Refixing Or Removal To Store Complete All As Specified And Directed. , Taking Down Door Chowkhat With Shutter Area N-Exc 1.5 Sqm Each(Without Taking Off Shutters From The Frame) Complete All As Specified And Directed. , Taking Down Chowkhats Or Frames With Shutters Exc 1.5 Sqm But Not Exc 4 Sqm Each (Without Taking Off Shutters From The Frame) Complete All As Specified And Directed. , Taking Down Shutters Of Wooden Or Aluminium Door Of Any Description N. Exc 1 Sqm Each Complete All As Specified And Directed. , Taking Down Shutters Of Wooden Or Aluminium Door Any Description Area Exc 1 Sqm And N Exc 2 Sqm Each Complete All As Specified And Directed. , Dismantling Wall And Ceiling Boards Or Insulation Boards, Any Thickness, Any Description, Including Cover Fillets Complete All As Specified And Directed. , Demolition Of Reinforced Cement Concrete (Reinforcement Cut As Required To Facilitate Demolition) Of Any Description And In Any Position Not Otherwise Specifically Provided For Complete All As Specified And As Directed. , Taking Down Cement Plaster Of Any Description On Brick Or Stone Walls Etc Including Racking Out Joints Hacking For Key Scrubbing Down With Water Etc Complete All As Specified And Directed. , Demolition Of Brick Work Built In Cement Mortar Or Cement Lime Mortar , Dismantling Structural Steel Work Including Doors, Gates But Excluding Framed Trusses Etc Complete All As Specified. , Demolition Of Stone Slabs And Tiles Laid Dry And Dry Or Pointed Of Any Description Or Thickness Infloors, Aprons Etc. , Dismantling, Floor Hearth Or Wall Tiling Inclduing Cement Mortar Bedding And Removing Rubbish Off The Premises Complete All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) In Ground Floors And Pavings Not Exc. 15 Cm Thickness (Below Or Above Ground Level) Complete All As Specified And Directed. , Demolition And Breaking Up Drain Waste Pipes (Sgsw, Ac Or Rcc, Ci ) Of Internal Dia 75/110 Mm, Set In Cement Mortar In Any Position Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
27.
Defence #11392754 Technical Bid
Tender for Demolition Of Brick Work /Stone Masonry/Pcc Block Masonry Built In Cement Mortar Of Any Description Complete All As Specified And As Directed , Taking Down Cement Plaster Of Any Description Hacking For Key Or Raking Out Joint On Old Brick Work/ Stone /Concrete Surface Etc Complete All As Specified And As Directed , Demolition Of Reinforced Cement Concrete (Reinforcement Cut As Required To Facilitate Demolition) Of Any Description & In Any Position Not Specifically Provided For Complete All As Specified And As Directed , Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For Etc Complete All As Specified And As Directed , Dismantling Of Fencing Posts Or Struts (Wood, Steel Rcc) Any Section, Posts Embeded In Natural Ground Etc, Including Taking Out Embeded Portion And Making Good Distrubed Ground Complete All As Specified And As Directed , Dismantling Of Fencing Wire Mesh, Any Type Etc Complete All As Specified And As Directed , Demolition Of Stone Slab And Tiles Incl Backing Coat Of Any Description Or Thickness In Floors, Aprons Etc (Laid Dry Or Laid Dry And Pointed) Etc Complete All As Specified And As Directed , Demolition Of Cement Concrete And Paving Not Exc 15 Cm Thick (Below Or Above Ground Level) Complete All As Specified And As Directed. , Excavating In Post Holes (Or Similar Holes) Each Not Exceeding 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering, And Removing Surplus Soil To A Distance N Exc 50M And Making Good Surfaces In Soft/Loose Soil Complete All As Specified And As Directed. , Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Soft / Loose Etc Complete All As Specified And As Directed , Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm. Etc Complete All As Specified And As Directed , Removing Excavated Material Exc. 250 M But N Exc. 500 M And Depositing Where Directed Et Complete All As Specified And As Directed , Material And Labour For Sand Filling Under Floors Or In Foundations Including Watering And Consolidation Under Bedding For Interlocking Tiles Etc Complete All As Specified And As Directed , Material And Labour For Reinforced Cement Concrete (Nominal Mix) Type (1:2:4) B-1 (With Using 20 Mm Graded Stone Aggregates ) As Columns, Pillars, Piers, Posts, Ftg, Etc Struts Etc Complete All As Specified And As Directed , Material And Labour For Plain Cement Concrete 1:4:8 Type D-2(With Using 40 Mm Graded Stone Aggregates) As In Foundations And Mass Concrete Etc Complete All As Specified And As Directed , Material And Labour For Providing Cement Concrete1:2:4 Type B 0 (12.50Mm Graded Stone Aggregate) In Copings, Leveling Concrete, Kerbs, Water Troughs And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating Complete All As Specified And As Directed , Material And Labour For Providing 25Mm Thick Precast Cement Concrete Louvres Type B-0 , 1:2:4 (With Using 12.5 Mm Graded Stone Aggregaes) Set In Cm 1:6 As And Jallies, 25Mm Thick (Measured Solid), Including All Mouldings But Excluding Frame (Pre -Cast Frame Shall Be Measured Separately And Paid For Under Item) Etc Complete All As Specified And As Directed , Material And Labour For Plain Cement Concrete 1:2:4 Type C-1, (With Using 20 Mm Grades Stone Aggregates) As In Walls Or Retaining Walls, Any Thickness, Size Or Shape Including Pilasters, Buttresses Columns, Pillars, Boundary Pillars And Posts (Including Caps And Base) Incl Form Work Etc Complete All As Specified And As Directed , Material And Labour Brickwork (Old Size Brick) With Sub Class ‘B Bricks, Straight Or Curved On Plan Exc 6M Mean Radius Built In Cement Mortar 1:4 Etc Complete All As Specified And As Directed , All As Per Item No 20 Above, But Except Brick, , Material And Labour Brickwork (Old Size Brick)With Sub Class ‘B Bricks, Straight Or Curved On Plan To Any Radius In Half Brick Thick Walls Built In Cm 1:4 Etc Complete All As Specified And As Directed , All As Per Item No 21 Above, But Except Brick, , Material And Labour For Mirror Polishing 16-18 Mm Thick Granite (Of Any Type) With High Gloss Finish Machine Cut, In Floor Etc Laid Over Cement Screed And Jointed With Grey Cement Slurry And Pointing With White Cement With Admixture Of Pigment To Match The Shade Of Granite Stone Including Grinding & Necessary Polishing & Over 15 Mm Thick Screed With 1:6 Cm Complete All As Specified And Directed. , Material And Labour For Formwork With Square / Rectangular Pillars, Posts, Struts, Piers, Columns And, Ftg Etc, Stanchions With Rough Finished Surface Of Concrete Etc Complete All As Specified And As Directed , Material And Labour Tmt Bar 10Mm Dia And Over Cut To Length Bent To Shape Required Including Cranking, Bending Spirally For Hoping For Columns Hooking Ends And Binding With & Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete. , All As Per Item No 25 Above But 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders Etc Complete All As Specified And As Directed , Supply And Fix Framed Work Such As Grills, Gratings, Guard Bars Etc With Ends Of Bars Shouldered And/Or Riveted, Or Forged Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railing; Framework Of Water Tanks And Similar Work Conforming To Fe-290 Gde-E-165 Incl Dismantling Of Existing Mild Steel Work Work Etc Complete All As Specified And Directed. , Supply And Fix Posts And Struts As In Fencing Including Cutting Tops To Shape As Directed, Drilling Holes, Notching For Wire, Etc.; Flat Iron Fillets (For Securing Wire Mesh Etc.) Including All Necessary Drilling, Bolting Or Riveting, Etc., And Similar Work Conforming To Fe-290 Gde E-165 Etc Complete All As Specified And As Directed , Supply Only Galvanised Chain Link Fencing Of Mesh Size (75Mmx75mmx3.15Mm) Etc Complete All As Specified And As Dicected , Fixing Only Galvanised Chain Link Fencing Of Mesh Size (75Mmx75mmx3.15Mm)) Size And Any Type Of Standards, Rails, Straining Bolts, Etc. Including Provission Of Binding Wire Etc Complete All As Specified And As Directed , Supply And Fix Pvc Coated Chain Link Fencing, Size Of Mesh 75 Mmx 75 Mm Made Out Of 3.15Mm Dia Gi Wire (Conforming To Relevant Is) Excluding Thickness Of Pvc Coated , Colour As Approved, Fixed To Any Type Of Fencing Pots, Standard Rails, Straining Bolts Etc Complete All As Specified And Directed . , Supply And Fix Mild Steel Screw Bolts (Machine Made) With Hexagonal Or Spuare Heads At One End And Screwed The Other Or Screwed Both Ends, Each Screwed End To Be Fitted With Washers And One Hexagonal Or Square Not N.Exc 5 Cm Long And Diameter Of Shank 5 To 10 Mm Complete All As Directed , Material And Labour For Mild Steel Round Bars Fe 410W (Gde.E-250) Quality-A, 10Mm Dia And Over, Cut To Length, Bent To Shap Required Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Les Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed. , Supply And Fix In Repair Galvanised, 2 Strand, Steel Barbed Wire 2.24 Mm Dia Barbed With 2Mm Dia Barbs At 75Mm Spacings And Straining And Fixing To Any Type Of Standard Rails Straining Bolts, Including, Securing Or Tying At Crossings With And Orovising Of Galvanised Mild Steel Wire, Staples Or Steel Pins, Etc. Complete All As Directed. (Each Line Wire Measured) , Supply And Fix In Repair Razor Blade Galvanised Concertina Coil Of 600Mm Diametre Made Out Of 2.59Mm Thick Galvanised Wire Having Weight Of Each Coil @ 15.2Kg+/-5%, Stretched To A Length Of 10 To 12 M To Achieve 950Mm Dia As In Fencing To Steel Posts And To Another Coil/Ms Ribs Including Fixing With Special Galvanised Fastners Such As J Clips, U Clips C Clips Etc, Fixed In Position Complete All As Specified And As Directed. Note: Linear Measurement(Per Rm Of Concertina Coil Of 600Mm Dia) Shall Be Measured And Paid. , Restraining And Resecuring Existing Barbed Wire Of Any Description Including Making Good Stapples Etc Complete All As Specified And Directed , Material And Labour For Machine Presssd Pre-Cast Concrete Interlocking Coloured Paving Block Of Glass Fibre Reinfoced Glossy Finished Vibro Compacted Any Shape And Size Confirming To Is-15658-2006 Of 60 Mm Thick, M-35 Grade To Match With Grey Cement And Pigment Etc Complete All As Specified And As Directed , Material And Labour For Machine Presssd Pre-Cast Concrete Interlocking Coloured Paving Block Of Glass Fibre Reinfoced Glossy Finished Vibro Compacted Any Shape And Size Confirming To Is-15658-2006 Of 80 Mm Thick, M-35 Grade To Match With Grey Cement And Pigment Etc Complete All As Specified And As Directed , Supply And Fix Exterior Grade, Coloured Glossy Finish Rubber Pressed, Cement Concrete Designer Chequered Tiles Of Size 30Cm X 30Cm X 25Mm Thick Set, Jointed And Pointed In Neat Cement Slurry With Grey Cement And Pigment To Match The Shade / Colour / Matrix Of Tiles Over 15 Mm Thick In Cm 1:6 For Laying Floor Finishes Etc Complete All As Specified And As Directed , Material And Labour For Heavy Duty Parking Tiles Size 300Mm X 300 Mm X 10 Mm Thick White Cement And Pigments Of Approved Maked Jointed With Cement Slurry And Pointed With White Cement Mixed With Pigment To Match With The Tiles Over 15 Mm Thick In Cm 1:6 For Laying Floor Finishes Etc Complete All As Specified And As Directed , Material And Labour For 100 Mm Thick Plain Cement Concrete 1:4:8 Type D2 (Using 40Mm Graded Stone Aggregate) In Foundation, Floor Etc Complete All As Specified And As Directed , Material And Labour For 75 Mm Thick Cement Concrete Type D- 2, 1:4:8 (40Mm Graded Stone Aggregate) As In Sub Base Of Flooing Etc Complete All As Specified And As Directed , Material And Labour For 100Mm Thick Plain Cement Concrete 1:2:4 Type B1 (Using 20Mm Graded Stone Aggregate )As.In Floor Finishing Even And Smooth With Out Using Extra Cement Complete All As Specified And As Directed , Material And Labour For Rubber Moulded Factory Made Pre-Cast Kerb Stones Of Cement Concrete Type B-1 1:2:4 (With Using 20Mm Graded Stone Aggregates) Fixed In Position To The Required Line, Level And Curvature, Jointed With Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Making Joints With Or Without Grooves (Thickness Of Joints Except At Sharp Curve Shall Not To More Than 5 Mm), Including Making Drainage Opening Wherever Required Et Complete All As Specifed And As Directed. , Material And Labour For Rendering 15 Mm Thick In Cm (1:4) On Fair Faces Of Brick Work Or Concrete Surface Finsihed Even And Smooth (Without Using Extra Cement) Etc Complete All As Specified And As Directed , Material And Labour For Preparation Of Newly Plastered Surface Of Walls And Applying Two Coat Of Cement Base Paint Over A Coat Of Primer Complete All As Specified And As Directed. , Material And Labour For Comple Removal Of Existing Treatment Of Old Plastered Surface Of Wall And Applying Two Coat Of Cement Base Paint Over A Coat Of Primeretc Complete All As Specified And As Directed , Material And Labour For Preparation New Of Previously Un Treated Steel And Iron Surface Of Any Description, Over 10 Cm In Width Or Girth , Not Otherwise Described And Painting With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Etc Complete All As Specified And As Directed , Material And Labour For Preparing New Concrete Surface And Applying Two Coat Of Synthetic Enamel Paint Over A Coat Of Primer Etc Complete All As Specified And As Directed , Material And Labour For Preparing Old Concrete Surface And Applying One Coat Of Synthetic Enamel Paint Etc Complete All As Specified And As Directed
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
Contract Date: Ref. Documents Contract Value : 3.18 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Uttarakhand View Result →
31.
Public Administrative Department #11382445 AOC
Tender For Annual Plan-Pro.No 315/26 Crematorium Construction In Avanur Gp 2025-26-Avr 315/26-General Civil Work - Building construction 2 2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil 3 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 4 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 5 OD316310/2025-2026:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site . Modified from 60.7.1 6 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) 7 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 8 5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 9 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts 10 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 11 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete 12 2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. 13 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete 14 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15°landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III)derived from natural sources: 3 graded stone aggregate 20 mm nominal sizederived from natural sources). 15 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 16 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 17 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 18 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work 19 11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete 20 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 21 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) 22 21.3.3:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness(weight not less than 20 kg/sqm) 23 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 24 11.20.2:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Medium shade pigment using 50% white cement 50 % Grey cement 25 8.31:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 26 17.7.2:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap 27 17.2.2:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked black solid plastic seat and lid 28 50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 29 18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore 30 18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore 31 50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall 32 50.18.7.4.2:Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall 33 50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 34 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 35 17.29:Providing and fixing 100 mm sand cast Iron grating for gully trap. 36 OD325929/2025-2026:Supply and fixing PVC frame and shutter for doors of size of (0.8mX2.00m)including cost of labour and materials as per direction of departmental officers. 37 OD326277/2025-2026:Supplying and fixing Pressed Steel Door of standard pattern with frames as per profile of IS:4351 of section 105*60mm using 18G (1.2mm thick CRCA) sheet and shutters made of section 75*30mm of outer styles and horizontal members and then inserted with enclosed and stiffened sheet 26CR as per the specification with zinc chromate primer including all charges of fittings, conveyance etc, complete.steel door of size 120*210 cms 38 51.19.ST2:Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) 2. 15 to below 25 flush capacity 39 OD326287/2025-2026:Ferrow cement soak pit 75 cm dia and 75 cm height 40 50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. 41 50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. 42 10.6.2:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover 43 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 44 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 45 OD326395/2025-2026:supplying and fixing 150mm half cut section with brackets at the end of sheet or tiled roof for rain water collection including all cost and materials , conveyance, labour charges etc. 46 OD330008/2025-2026:Roofing with Premium Aluzinc roofing powder coated Tiled design sheet with matte finishing 0.5mm thick or nearest available thickness with overlaps of 150mm at ends and G I hook or screw or crank C I bolts and nuts including plain and bitumen washers etc completed.
Contract Date: Jun 27, 2026 Contract Value : 30.93 Lakh
Government Departments No of Bidders 3
32.
Health and Family Welfare #11375574 AOC
Repairs To Central Medicine Store Building At Nizamabad In Nizamabad District-33.97 Dismantling, Clearing Away And Carefully Stacking Useful Materials For Re-Use And Disposal Of Unserviceable Materials With 100M Lead As Directed By Executive Engineer Duly Taking Actual Premeasurements Before Dismantling Including All Labour Charges , Etc., Complete. Unreinforced Cement Concrete Up To 15Cm Thickness 120.00 Kadapa Slabs Or Shahabad Stone Slabs On Sand Bed 9.00 Earth Work Excavation For Foundations ( Mechanical Means ) For Buildings In Ordinary Soils And Depositing On Bank For All Lifts And With An Initial Lead Of 10M And Up To 3M Depth Including All Operational, Incidental, Labour Charges Such As Shoring, Sheeting, Planking, Strutting Etc., Complete For Finished Item Of Work Excluding Dewatering Charges Etc., As Per Ss 20 B ( Apss 308 ) . 21.12 Plain Cement Concrete ( 1:5:10 ) ( Cement: Fine Aggregate: Coarse Aggregate ) For Foundations And Under Flooring Bed Using Coarse Aggregate 40Mm Size Hard , Machine Crushed Granite From Approved Quarry Including Cost And Conveyance Of All Materials Like Cement, Sand, Coarse Aggregate, Water Etc. To Site, Sales & Other Taxes On All Materials And Including All Charges For Machine Mixing, Laying Concrete In Foundations And Under Flooring Bed, Ramming In 15 Cm Layers Finishing Top Surface To The Required Level Curing Etc., Complete For Finished Item Of Work. ( Apss No. 402 ) . 1.35 Supply And Placing Of The Design Mix Concrete M 25 Grade Corresponding To Is 456 With Minimum Cement Content Of 380 Kgs Per 1 Cum Of Concrete Using Concrete Batching Plant With 20Mm Size Graded Machine Crushed Hard Granite Metal ( Coarse Aggregate - As Per Is 383 - 1970 And Is 2386 Part 1 To Part 8 ) From Approved Quarry Including Cost And Conveyance Of All Materials Like Cement, Fine Aggregate ( Sand ) Coarse Aggregate, Water Etc., To Site And Sales & Other Taxes On All Materials, Centering Using Steel Scaffolding Pipes, Jack Props, Wallers, Foot Plates, Brackets, Steel Centering Plates Etc., Including All Operational, Incidental And Labour Charges Such As Weigh Batching, Machine Mixing, Laying Concrete, Curing Etc., Complete But Excluding Cost Of Steel And Its Fabrication Charges For Finished Item Of Work ( Apss No. 402 ) . Gate Footings 0.43 Pedstals 1.82 Gate Columns 2.93 Masonry Work In Cm ( 1:6 ) Prop ( Cement : Screened Sand ) In Superstructure With Fly Ash Cement / Lime Solid Blocks Of Size 290Mm X 225Mm X 140Mm From Approved Source Having Minimum Crushing Strength Of 50 Kg / Sqcm. Including Cost And Conveyance Of All Materials Like Cement, Sand, Bricks, Water Etc., To Site, Including Sales & Other Taxes On All Materials And Such As Labour Charges, Like Mixing Cement Mortar, Scaffolding Charges, Constructing Masonry, Lift Charges, Curing, Etc., Complete For Finished Item Of Work. ( Apss No. 501 & 504 ) . 0.50 Providing Thermo Mechanically Treated ( Tmt ) ( Fe -500 / 500D / 550D From Primary Producer Tata, Sail, Vsp, Jsw &Shyam Steel Etc As Per Is 1786-2008 ) Of Different Diameters For Rcc Works , Including Labour Charges For Straightening, Cutting, Bending To Required Sizes And Shapes, Placing In Position With Cover Blocks Of Approved Materials And Size And Tying And Lap-Splicing With Binding Wire Of 18 Swg, Forming Grills For Reinforcement Work As Per Approved Designs And Drawings, Including Cost And Conveyance Of Steel Bars, Including All Wastages Such As Overlaps, Couplings, Chairs, Spacer Bars Including Cost And Conveyance Of Binding Wire, Cover Blocks And All Incidental, Operational, Labour Charges Such As Cutting, Bending, Placing In Position, Tying Including Sales And Other Taxes On All Materials Etc. , Complete For Finished Item Of Work. ( Apss No.126 ) . 339.53 Flooring With 16 To 18Mm Thick High Polished Granite Stone Slabs Other Than Black And Regular Colours ( I.E. Of Shades Like Paradiso / Bala Flower / Copper Silk / Laka Red / Lavender Blue ) With Borders And Design As Per The Pattern Approved By The Engineer-In-Charge Of Length Not Less Than 2.43 Mts Set Over Base Coat Of Cement Mortar ( 1:8 ) , 20Mm Thick Using Screened Sand Over Cc Bed Already Laid Or Rcc Roof Slab Including Neat Grey Cement Slurry Of Honey Like Consistency Spread @ 3.3 Kg Per Sqm And Jointed Neatly With White Cement Paste Mixed With Pigment Of Matching Shade To Full Depth Including Cost And Conveyance Of All Materials Like Cement , Sand , Water , Granite Slabs Etc., To Work Site And All Operational, Incidental Labour & Lift Charges, Polishing Charges And All Other Taxes On All Materials, Cost Of Base Coat Complete For Finished Item Of Work ( S.S.701 & Special ) Ground Floor 120.00 Supply Of Precast Concrete Blocks For Paving Of M-35Grade And Thickness Not Less Than 60 Mm For Very Heavy Traffic Areas Conforming To Is 15658:2006 In All Shapes And Designs Of Any Shade As Approved By Engineer-In-Charge Set Over Base Coat Of Cement Mortar ( 1:6 ) , 12 Mm Thick Using Screened Sand Over Cc Bed Alredy Laid Or Rcc Roof Slab Including Neat Cement Slurry Of Honey Like Consistency Spread @ 3.3 Kgs Per Sqm And Jointed With Neat White Cement To Full Depth Mixed With Pigment Of Matching Shade Including Cost And Conveyance Of All Materials Like Cement, Sand, Water And Tiles Etc., Complete For Finished Item Of Work. Ground Floor 33.75 Supply And Fixing Ornamental Ms Main Gate Of Size 9Mts X 3.75 Mts ( Average Height ) I.E., Varying From 3Mts To 4.50 Mts At Centre As Per The Approved Drawing Using Ms Angle Of 75Mm X 75Mm X 6Mm Alround For Frame And 63Mm X 6Mm Ms Flats In 6 Rows Horizontally, 25Mm Ms Square Bars At 125Mm C / C And Ci Spikes 9 Long On Top And 6 Long Ci Spikes In The Middle In Two Rows Including 6 Nos Of Pin Clamps Fixed In Rcc Columns, 2 Nos Of Ms Aldrops 450 Mm Long ( Special ) Welded At The The Centre On Each Side, 2 Nos Of Ms Tower Bolts 450Mm Long ( Special ) And Providing Brass Emblem On Emboseed Cover In The Centre Of The Two Leaves And Fixing 2 Nos. Of Rollers Per Each Leaf Including Cost And Conveyance Of All Materials, Fabrication Charges , Welding Charges, Incidental Charges And All Labour Charges, Etc., Complete For Finsihed Item Of Work. 30.00 Supply And Laying Of Isi 25Mm Outer Dia Medium Grade, With Is:9537 Part 3 Rigid Pvc Concealed In Wall With All Required Pvc / Metallic Junction Boxes Including Masonary Work And Labour Charges Etc., Makes:- Sudhakar / Finolex / Modi / Vip / Precision / Universal / Million Plast / Gold / Polycab / Dec. 5.00 Wiring With Run Of 2 Of 1.5 Sqmm Frlsh / Hffr Pvc Insulated 1100V Grade As Per Is:694 / 1990, Is 17048 Specification For Copper Cable. In Existing Pvc Conduit Pipe Including Supply And Fixing Of Jumbo Ceiling Rose And 6A / 10A Isi Mark 1Way Modular Switch With Required Modular Box And Cover Frame In Existing Surface Or Concealed Pipe Wiring Including Cost And Conveyance Of All Material And All Labour Charges Etc., Complete For Light, Fan, Exhaust Fan And Bell Points In N.R.B. Makes Of Wires : Finolex / Rr Kabel / Havells / Polycab / Finecab Gold ( Hffr ) / Gm ( Hffr ) / Gold Medal ( Hffr ) / Million ( Hffr ) / Kei ( Hffr ) / V-Guard ( Hffr ) . / Dec ( Hffr ) . Makes Of Switches : Legrand Arteor / Schneider Zen Celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina / Gold Medal Gifa / Gm-Zenova / L&T- Englaze. 2.00 Supply And Fixing Of 10A 3 / 2 Pin 2 Module Modular Socket With Shutter With 6 / 10A 1 Way 1 Module Modular Switch, 3 Module Box With Cover Frame In Common Switch Board Including Cost And Conveyance Of All Materials And All Labour Charges Etc., Complete In N.R.B. / R.B. Makes Of Switches : Legrand Arteor / Schneider Zen Celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina / Gold Medal Gifa / Gm-Zenova / L&T- Englaze. 2.00 Supply And Fixing Of 6 / 10A 1 Way 1 Module Modular Switches - 2 Nos And 10A 3 / 2 Pin 2 Module Modular Socket With Shutter - 2 Nos Modular Type With Cover Plate And Gi Switch Box Fixing On Separate Board Including All Labour Charges Etc., Complete. Makes Of Switches : Legrand Arteor / Schneider Zen Celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina / Gold Medal Gifa / Gm-Zenova / L&T- Englaze. 2.00 Supply And Fixing Of 16A / 6A 2 Module Combi Socket Modular Socket With Shutter With 16A / 20A 1 Way 1 Module Modular Switch Fixed On Suitable Size Modular Box With Required Cover Frame Including With Connections, Cost And Conveyance Of All Material And All Labour Charges Etc., Complete Makes Of Switches : Legrand Arteor / Schneider Zen Celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina / Gold Medal Gifa / Gm-Zenova / L&T- Englaze. 50.00 Supply And Run Of 3 Of 2.5 Sq.Mm ( Phase, Neutral And Earth ) Frlsh / Hffr Pvc Insulated 1100V Grade As Per Is:694 / 1990, Is 17048 Specifications For Copper Cable Of In Existing Pipe. Makes Of Wires : Finolex / Rr Kabel / Havells / Polycab / Finecab Gold ( Hffr ) / Gm ( Hffr ) / Gold Medal ( Hffr ) / Million ( Hffr ) / Kei ( Hffr ) / V-Guard ( Hffr ) / Dec ( Hffr ) . 50.00 Supply And Run Of 3 Of 4.0 Sq Mm ( Phase Neutral And Earth ) Frlsh / Hffr Pvc Insulated 1100V Grade As Per Is:694 / 1990, Is 17048 Specifications For Copper Cable Of In Existing Pipe For Power Points And Ac Sockets Inlcuding All Labour Charges Etc., Complete. Makes Of Wires : Finolex / Rr Kabel / Havells / Polycab / Finecab Gold ( Hffr ) / Gm ( Hffr ) / Gold Medal ( Hffr ) / Million ( Hffr ) / Kei ( Hffr ) / V-Guard ( Hffr ) / Dec ( Hffr ) . 10.00 Supply, Transportation And Fixing Of 22W + / 10% , > / 2300 Lumens, 1200Mm Length Led Light Housing Made With Alluminium Anodised Body, Wide Operating Voltage With Pf≥0.9, Surge Protection: > 2Kv, Thd<10%, With Inbuilt Driver And Frosted Cover Cct: 3000K - 6500K As Desired By The Department As Per Is, Minimum Cri≥80 Etc., Complete With 5 Years Warranty With Bis Certification With Bis Certification Luminaire Make: Phillips / Osram / Ge Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / Panasonic / Halonix / Hpl. Led Make : Philips Lumileds / Cree / Nichia / Osram / Samsung / Lg Leds. Make & Model Will Be Approved By The Head Office / Engineer-In-Charge. 2.00 Supply, Transportation And Fixing 32-36W ( >=3240 Lumens ) Edge Lit, 2 X2 ( 600Mm X 600Mm ) Slim Panel Recessed / Surface Led Luminaire Square Housing Made Of Aluminum Alloy With Corrosion Resistant Powder Coat, With High Efficiency Acrylic Wide Diffuser, With Wide Operating Voltage Range, Power Factor > 0.9, Surge Protection >2Kv, System Efficacy Of >90 Lumens / Watt, Cct: 3000K - 6500K As Desired By The Department, Cri >80, And Thd Is Less Than 15% With Non Integrated Driver Etc., Complete With 2 Years Warranty With Bis Certification. Luminaire Make: Phillips / Osram / Ge Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / Panasonic / Halonix / Hpl. Led Make : Philips Lumileds / Cree / Nichia / Osram / Samsung / Lg Leds. Make & Model Will Be Approved By The Head Office / Engineer-In-Charge. 5 Supply, Transportation And Fixing Of 18 W + / -10% ( >= 1800 Lumens ) Back Lit Led Down Light Recessed / Surface Mounting Round / Square With Housing Made Of Powder Coated Pressure Die Cast Aluminium Housing With Extended Heat Sink, With Protruded High Efficiency Diffuser, Ip20, With Wide Operating Voltage Range, Power Factor > 0.9, Surge Protection: > 2Kv, System Efficacy Of >100 Lumens / Watt, Cct: 3000K - 6500K As Desired By The Department And As Per Is, Cri >80, And Thd Is Less Than 15% Etc., Complete With 5 Years Warranty With Bis Certification. Luminaire Make: Phillips / Osram / Ge Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / Panasonic / Halonix / Hpl. Led Make : Philips Lumileds / Cree / Nichia / Osram / Samsung / Lg Leds. Make & Model Will Be Approved By The Head Office / Engineer-In-Charge. 171 Supply, Transportation And Fixing Isi Mark Batten Holder / Slanting Holder Makes : Anchor / Gold Medal Olive / Million Zoom In Lieu Of Ceiling Rose Of Light Point Complete With All Connections And All Labour Charges With 5W Led Lamp. Led Lamp Makes: Phillips / Osram / Crompton / Eveready / Bajaj / Havells / Halonix / Jaquar / C&S / Gm / Gold Medal / Million / Syska. Make & Model Will Be Approved By The Head Office / Engineer-In-Charge. 3 Supply, Transportation Of Energy Efficient Decorative Fan, 1200 Mm Sweep, Aluminium Body, Consuming 28 W, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current ( Bldc ) Motor, Class Of Insulation: B, 3 Nos Blades, 30 Cm Long Down Rod, 2 Nos Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Greater Than 0.90, Service Value ( Cmm / W ) Greater Than 8.5, Air Delivery Minimum 235 Cmm, 350 Rpm ( Tolerance As Per Is:374-2019 ) , Thd Less Than 10%, Remote Or Compatible To Electronic Step Type Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise = 75 Degree C ( Max ) , Insulation Resistance More Than 2 Mega Ohm, Suitable For 230V, 50 Hz, Single Phase Ac Supply, Earthing Etc., Complete. Makes : Atomberg ( Efficio + ) / Havells / Orient / Rr / Halonix Make & Model Will Be Approved By The Head Office / Engineer-In-Charge. 3 Supply And Fixing Of Modular Type Stepped Electronic Regulator For Sweep Ac Ceiling Fans Of 1200Mm / 1400Mm Complete With Connections. Makes : Legrand Arteor / Schneider Zen Celo / Honeywell Blenge Plus / Crabtree Amare / Logus Platina / Gold Medal Gifa / Gm-Zenova / L&T Englaze. 3 Labour Charges For Fixing Of Ceiling Fan Including Giving Connections With Twin Core Wire Etc., Complete. 2 Supply, Transportation Of 12 ( 300Mm ) Isi, 900 Rpm Heavy Duty Exhaust Fan With Metallic Blades Wiremesh With All Accessories Etc Complete. Makes : Crompton / Almounard / Havells Turbo Force. 3 Supply, Transportation And Installation Of Split Ac Unit With High Wall Mounted 100% Copper Indoor Unit And Outdoor Condencing Unit Hermetically Sealed Compressor Suitable For Operation On 230V, 50Hz, 1Phase Ac Supply Capable Of Performing Cooling Dehumidifying Air Circulating And Filtering With Cooling And Condensing Units With 3.0 Mts Of Copper Piping, Insulation Kit And 4 Mts Of 3 Core Copper Flexible Chord ( Voltage Range 160- 264 Volts ) And Cordless Remote Control With 5 Years Warranty Compressor And Comprehensive Maintenance For 2 Years. 1.5 Tr 3 Star Capable Of Delivering 18000 Btu / Hr Makes: Carrier / Daikin / Blue Star / Hitachi. 3 Supply And Erecting Fully Automatic Line Voltage Stabilizer For Operation On Input Voltage 200 To 250V. Rated For 4 Kva Maximum Load And Time Delay Model With Volt Meter, Selector Switch, 6A / 16A Flush Type, 5 Pin Socket For Out Put And With 3 Core Flexible Chord And 3 Pin 6 / 16A Plug Top Suitable For Refrigerator For Continuous Operation Including Cost And Conveyance Of All Mateials And All Labour Charges Etc., Complete. Makes : V-Guard / Real Guard / Uni Stab / Itl.
Contract Date: Ref. Documents Contract Value : 19.36 Lakh
Government Departments No of Bidders 1
35.
Housing Urban and Rular Development #11360369 AOC
Bids Are invited for Supplyofmaterial Precastrcccoverhd20 - Precast Rcc Manhole Cover With Frame Of Hd-20 Grade As Per The Detailed Specification Mentioned In The Specification Document. , Precastrcccoverehd35 - Precast Rcc Manhole Cover With Frame Of Ehd-35 Grade As Per The Detailed Specification Mentioned In The Specification Document. , Precastrcccoverehd35perforated - Precast Rcc Manhole Perforated Cover With Frame Of Ehd-35 Grade As Per The Detailed Specification Mentioned In The Specification Document. , Ccpaverblock - Interlocking Cc Paver Block As Per The Detailed Specification Mentioned In The Specification Document. , Stoneaggregate20 - Stone Aggregate As Per The Detailed Specification Mentioned In The Specification Document. , Coarsesand - Coarse Sand As Per The Detailed Specification Mentioned In The Specification Document. , Fpsbrick - Fps Bricks As Per The Detailed Specification Mentioned In The Specification Document. , Opc43 - Portland Cement As Per The Detailed Specification Mentioned In The Specification Document. , Precastcckerbstone - Precast Cc Kerb Stone As Per The Detailed Specification Mentioned In The Specification Document. , Bitumenemulsion - Bitumen Emulsion As Per The Detailed Specification Mentioned In The Specification Document. , Rccgratingwithframe500x450 - Rcc Grating With Frame As Per The Detailed Specification Mentioned In The Specification Document. , Gsb - Granular Sub Base As Per The Detailed Specification Mentioned In The Specification Document. , Redsandkerbstone - Red Sand Stone As Per The Detailed Specification Mentioned In The Specification Document. , Precastrccslab - Precast Rcc Rectangular Drain Cover As Per The Detailed Specification Mentioned In The Specification Document. , Redsandstoneslab - Fine Dressed Red Sand Stone As Per The Detailed Specification Mentioned In The Specification Document. , Tactiletile - Tactile Tile As Per The Detailed Specification Mentioned In The Specification Document. , Ccbollard - Cc Bollard As Per The Detailed Specification Mentioned In The Specification Document. , Sfrcrailing - Pre-Fabricated Sfrc Railing As Per The Detailed Specification Mentioned In The Specification Document. , Rccgrating500x450 - Rcc Grating Without Frame As Per The Detailed Specification Mentioned In The Specification Document. Total Quantity : 20840
Contract Date: Ref. Documents Contract Value : 70.69 Lakh
Government Departments No of Bidders 3
37.
Housing Urban and Rular Development #11350867 Technical Bid
Tender for Providing And Constructing Temporary Island 11M Diameter For Construction Of Well Foundation For 5.50M Dia Well. , Cutting Edge Of Mild Steel Providing And Laying Cutting Edge Of Mild Steel Weighing 40 Kg Per Metre For Well Foundation Complete As Per Drawing And Technical Specification. , Reinforced Cement Concrete Work In M-25 In Well Curb With Cement , Approved Coarse Sand & 2 Cm. Gauge Well Graded Grit Including Necessary Shuttering , Placing And Fixing Of Reinforcement Including Its Binding With Wire But Excluding Cost Of Reinforcement And Also Including Supply Of All Materials, Labours T&P Etc. Required For Proper Completion Of The Work. , Reinforced Cement Concrete Work In M-25 In Well Steining With Cement , Approved Coarse Sand & 2 Cm. Gauge Well Graded Grit Including Necessary Shuttering , Placing And Fixing Of Reinforcement Including Its Binding With Wire But Excluding Cost Of Reinforcement And Also Including Supply Of All Materials, Labours T&P Etc. Required For Proper Completion Of The Work. , Sinking Of Wells 5.00Mtr. External Dia Through All Kinds Of Sand Silt, Clay Except Hard Stratum Like Kankar, Boulders, Rocks Only Below The Low Water Level Including Loading And Unloading Of Weight And Pumping Out Of Water Including Necessary T&P Machines, Labour Etc. Was Required For Proper Completion Of The Work (0.00 Meter To 3.00 Meter) , As Per Item No. 5 But 3.00 Meter To 10.00 Meter. , As Per Item No. 5 But 10.00 Meter To 15.00 Meter. , cement concrete Work In M-25 In Bottom Plugging Of Well With Cement, Approved Coarse Sand And 2Cm Gauge Well Graded Grit Including Necessary Shuttering, Placing & Fixing Of Reinforcement Including Its Binding With Wire But Excluding Cost Of Reinforcement & Also Including Supply Of All Materials, Labours T&P Etc. Required For Proper Completion Of The Work. , cement concrete Work In M-20 In Intermediate Plugging Of Well With Cement , Approved Coarse Sand And 2Cm Gauge Well Graded Grit & Also Including Supply Of All Materials , Labours T&P Etc. Required For Completion Of The Work , Sand Filling In Side The Well Between Bottom And Top Plugging Including Watering Ramming And Also Including Necessary T&P Etc. Required For Proper Completion Of Work (Labour Only) , Reinforced Cement Concrete Work In M-25 In Well Caps With Cement Approved Coarse Sand & 2Cm Gauge Well Graded Grit Including Necessary Shuttering Placing & Fixing Of Reinforcement Including Its Binding With Wire But Excluding Cost Of Reinforcement And Also Including Supply Of All Materials, Labours T&P Etc. Required For Proper Completion Of The Work. , Reinforced Cement Concrete Work In M-30 In Substructures With Cement, Approved Coarse Sand & 2Cm. Gauge Well Graded Grit Including Necessary Shuttering ,Placing And Fixing Of Reinforcement And Also Including Supply Of All Materials, Labours T&P Etc. Required For Proper Completion Of The Work. , Furnishing And Placing Rcc/Psc M-35 In Superstructure As Per Drawing And T.S. With Cement Approved Coarse Sand & 2Cm Gauge Well Graded Grit Including Necessary Shuttering , Placing & Fixing Of Reinforcement Including Its Binding With Wire But Excluding Cost Of Reinforcement & Also Including Supply Material , Labour And T&P Etc. Required For Proper Completion Of The Work , Providing And Laying Cement Concrete Wearing Coat M-30 Grade Including Reinforcement As Per Mort&H Specifications 2702 Complete As Per Drawing And Technical Specifications , Hysd Steel Or Iron Work In Well Steining ,Well Cap, Abutments And Their Caps, Slabs, Curbs Etc. Brought To Required Shape Including Cutting, Bending & Also Including Cost Of Necessary Reinforcement For Proper Completion Of Work. (In Foundation) , As Per Item No. 15 But In Substructure , As Per Item No. 15 But In Superstructure , Plain Cement Concrete Below Aaproach Slab With 2 Cm Gauge Approved Stone Ballast , Approved Coarse Sand And Cement In The Proportion Of 1:2:4 Including Supply Of All Material, Labour And T&P Etc. Required For Proper Completion Of Work As Per Sor Ch.5-7(4.1) , M-30 Grade Reinforced Cement Concrete In Approach Slabs As Per Drawings And Clause 1200,500&1700 Of Morth Specifications (2001) , Supplying Fitting & Fixing In Position To Line And Level Elastomeric Bearing Of Approved Company/ Manufacturer Conforming To Irc : 83(Part-Iii) Section-Ix And Clause 2005 Of Morth Specifications Complete Including All Accessories As Per Drawing And Technical Specification. , Providing And Laying Of A Strip Seal Expansion Joint Catering To Maximum Horizontal Movement Upto 70 Mm, Complete As Per Approved Drawings And Standard Specifications To Be Installed By The Manufacturer/Supplier Or Their Authorised Representative Ensuring Compliance To The Manufacturers Instructions For Installation. , Cement Concrete With 4 Cm Gauge Approved Stone Ballast , Approved Coarse Sand And Cement In The Proportion Of 1:4:8 Including Supply Of All Material, Labour And T&P Etc. Required For Proper Completion Of Work In V.T. Base As Per . Sor Ch.5-3(4.1) , Supplying & Fixing Of 100Mm Dia Drainage Spouts Complete As Per Drawing And Technical Specificationwork. 2705 , Construction Of Embankment With Approved Material Obtained From Borrow Pits With All Lifts And Leads Up To 2 Km, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Table 300-2. , Construction Of Granular Sub-Base By Providing Close Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Front End Loader At Omc, And Compacting With Vibratory Roller To Achieve The Desired Density, Complete As Per Clause 401 , Providing, Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam Specification Including Premixing The Material With Water At Omc In Mechanical Mix Plant Carriage Of Mixed Material By Tipper To Site, Laying In Uniform Layers With Grader In Sub- Base / Base Course On Well Prepared Surface And Compacting With Vibratory Roller To Achieve The Desired Density. , Providing And Applying Tack Coat With Bitumen Vg-10 Grade Using Bitumen Distributor At The Rate Of 0.35 Kg Per Sqm On The Prepared Granular Surfaces Treated With Primer & Cleaned With Hydraulic Broom As Per Technical Specification Clause 503. , Providing And Laying Dense Graded Bituminous Macadam With 100-120 Tph Batch Type Hmp Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder @ 4.50 Per Cent By Weight Of Total Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification Clause No. 505 Complete In All Respects. , Providing And Laying Bituminous Concrete With Higher Capacity Batch Type Hot Mix Plant Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder Vg-30 @ 5.4 Per Cent Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification Clause No. 507 Complete In All Respects , Providing And Laying Filter Material Underneath Pitching In Slopes Complete As Per Drawing And Technical Specification As Per Mort&H Specification 2504 , Providing And Laying Pitching On Slopes Laid Over Prepared Filter Media Including Boulder Apron Laid Dry In Front Of Toe Of Embankment Complete As Per Drawing And Technical Specifications As Per Mort&H Specification 2504
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 1
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 3.30 Lakh
Local Bodies No of Bidders 1
39.
Public Administrative Department #11345394 AOC
Tender for Construction Of Strom Water Drain And Desilting At Mullai Vaikkal Ward No.10,12,14 & 15 In Needamangalam Town Panchayat , Cement Concrete Of Mix 1:4:8 (One Cement Four Sand Eight Aggregates) Using 40Mm Gauge Hard Broken Including Cost Conveyance Of All Materials To Site Including Labour Charges, Transporting And Placing In Position Including Shoring, Strutting Forming Protective Bunds, Cofferdams Bailing Out Of Water Labour For Mixing Compacting, Finishing And Curing, Working At Depths, Tools And Plants And Incidental Charges Such As Sheeting, Shoring And Bracing And Their Subsequent Removal Etc., Complete As Per Standard Specification. , Supplying & Erecting Centering For Sides & Soffiots Including Necessary Supports & Strutting Upto 3.29M Height For Plane Surfaces In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60Cm & 10 Gauge Stiffened, Welded With Steel Angle Of Size 25 X 25 X 3Mm For Boarding Laid Over Silver Oak Joists(Country Wood) Of Size 10 X 6.5Cm Spaced @ About 90Cm C/C And Supported By Casurina Props Of 10 - 13Cm Dia. Spaced @ 75Cm C/C Etc., Complete Complying With Standard Specifications And As Directed By The Departmental Officers. Rate For 10M2.For The Following Items.(Rcc Floor Slab, Roof Slab, Rectangular/ Square, Tee/ Ell Beams, Lintels, Staircase Waist Slabs, Landing Slabs, Landing Beam, Portico Beam Etc., ). Without Strutting , Plain Cement Concrete 1:2:4 (One Cement, Two Crushed Stone Sand And Four Hard Broken Stone Jelly) Using 20Mm Jelly For Wearing Coat Including Laying, Compacting, finishing And Curing, Etc., Complete As Per Standard Specificatins And As Directed By The Departmental Officers.-Mixing By Mechanical Means (S.No:135-Sd Book Vol-I )
Contract Date: Jun 29, 2026 Contract Value : 9.49 Lakh
Local Bodies No of Bidders 2
40.
Defence #11342816 AOC
Tender For Annual Maintenance Contract Of Existing Earthling Pits Of Technical Infra And Misc Work At Af Stn Awantipur; 1 M&L for Earthing complete with Copper earth plate 600 x 600 x 3.15 mm thick buried directly in ground (earth pit not less that 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mr below normal ground levelconnected to20x3 mm Cu strip as earthing lead by means of brazing after tighten by bolts, nuts, check nuts and washersfrom earth pit to test point with protection GI pipe of size 50mm dia light grade and providing masonry enclosure including watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 20 mm GI pipe light grade for earth strip protection complete with earth pitpit covers of 300mm x 300 mm made of cast iron including painting as per color coding as per IS,in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil complete all as specified, complete as specifed and directed. 2 Note: (i) Copper strip 7.5 mtr included in the quoted rate from earth pit to test point (ii) Contractor should ensure that result of each earthing is less than 2 Ohm and in case soilis not suitable for the same is to be placed suitable clay soil to bring the desired result. Contractor shall qute rates after site visit accordingly. (iii) On testing after completion if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to department. (iv) Work includes brazing work for earth strip. (v) Work includes brazing of Cu strip to copper earth electrode 3 M&L for Earthing complete with GI earth plate 600 x 600 x 6 mm thick buried directly in ground (earth pit not less that 2.25mtr deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground levelconnected to32x6 mm GI strip as earthing lead by means of brazing after tighten by bolts, nuts, check nuts and washersfrom earth pit to test point with protection GI pipe of size 50mm dia light grade and providing masonry enclosureincluding watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 20 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil complete all as specified and as directed. Note: GI strip 7.5 mtr included in the quoted rate from earth pit to test point. 4 M&L for brazing in repair work for GI strip not exceeding 3.2 cm in length and not exceeding 6 mm in thickness complete all as specified. 5 M&L for brazing in repair work for copper strip not exceeding 3.2 cm in length and not exceeding 6 mm in thickness complete all as specified. 6 S&F in replacement of saddle/insulator for strip with fixing arrangement in roof/wall of building having configuration upto G+5 for run of strips on it complete all as specified and directed. 7 Refixing only of strip (serviceable strips as obtained from taking down) of any type & size but including saddles/insulators with screws for fixing complete all as specified. 8 S&F aluminium strip 25x3.15 mm with saddles/insulators, complete with fixing screws for roof/down conductors/main earthing lead, including bracing/jointing and nut bolts jointing at all joints complete all as specified. 9 S&F copper strip 32 x 6 mm earthing lead laid in trenches/GI pipe for making grid/loop of earthing pit complete all as required at site all as specified and directed by Engr-in-charge. 10 S&F copper strip 20x3.15 mm with saddles/insulators, complete with fixing screws for roof/down conductors/main earthing lead, including bracing and nut bolts jointing at all joints complete all as specified. 11 S&F galvanized iron strip 25x4 mm with saddles/insulators, complete with fixing screws for roof/down conductors/main earthing lead, including bracing/welding and nut bolts jointing at all joints complete all as specified. 12 Taking down the existing aluminium/copper strip of any size and type from the top of blast pens/ground/equipment/bldg (roof/down conductor) and keeping in safe custody (for serviceable strips to re-use ) complete all as specified and directed. 13 M&L for Test point terminal block forearthing made of gun metal or phosphorus bronze size 75x75x25mm driled and srewed including 3 nos 8mm dia 25mm long hex head srew,complete as specified and directed. 14 M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI wire 4 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board /panel/ test point at the other including watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 20 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type by using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil complete all as specified. 15 M&L for Chemical Earthing cum Maintenance free earthing system complete UL-467 approved copper earth plate 900mmx600mmx5mm( purity above 99%) burried in ground to vertically to a depth not less than 3.5m deep below ground level with top edge earth electrode at a depth not less than 500 mm below normal ground level , provision of copper bus plate of size 200 mm x 25mmx 6 mm for inter connection with copper earth lead strip 32mmx6 mm and further connected to test point terminal block of size 120 mm x 120 mmx 25 mm made of copper as directed by watering pipe light grade with CI/ MSfunnel and wire mesh including excavation earth work in any type of soil and removil surplus soil to a distance not exceeding 50 m only, continuous copper strips/brazing to be used only including 45 Kg (minimum)NABL Lab certified backfill compound marconite for single bore holes soil mixed , alternate layers of conductive concrete resistivity of 0.001 Ohm & carbon based maintenance free compound (20 Kgs bagx5) make as per IEEE 80 2000, Clause 14.5 D Maintenance free earthing system to give earth resistance below 1 Ohms including excavation and earth workand earth to neutral voltage less than 2 volts, PCC chamber of PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate with pit covers of 300mmx 300 mm made of cast iron including painting as per color coding as per IS,complete as specifed and directed. 16 Note:(i) Copper strip 7.5 mtr and their joints included in the quoted rate from earth pit to test point. (ii) Contractor should ensure that result of each earthing is less than 1 Ohm and in case soilis not suitable for the same is to be placed suitable clay soil to bring the desired result. Contractor shall qute rates after site visit accordingly.(iii) On testing after completion if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to department. (iv) Work includes brazing work for earth strip.(v) Work includes brazing of Cu strip to copper earth electrode Make for backfill, conductive concrete- marconite 17 Supply and intallation of advance maintance free tripod ring earthing system by boring the required nos of holes of dimension 8 to 10 inch wide and length of hole should be less than approximately 2 inches of the electrode length in semi hard soil or hard soil consisting of three Nos (UL) 467-2007 or latest as well as IEC 62561listed CPRI tested Pure copper tube earth electrode designed in accordance to IS:3043(1987).The system consists of copper tube earth electrode having purity of 99.99%.There is a copper strip inside it which is pressure filledwith highly conductive crystalline mixture of metal alloys and other conductive material.Both the ends of the electrode should be permanently sealed with the extended terminal having two holes at the top for connecting the earthing system to the equipment/load.The Copper tube earth electrode should beof outer dia 50 mm,thickness of rod 01mm and length 03 mtrs tested according to IEC 62561-2 with minimum 10 years life span (the rod should be marked as per the UL certification ) including min 25 Kgs/electrode of earth enhancing compound (PROCEM) NABL certified, CPRI tested eco friendely tested as per the IEC 62561-7 and needs to be considered to fill the 100 mm bored hole surrounding to the electrode. the earth enhancing compound should have restivity less than 50 ohm-meter with chemically inert to sub soil that should not pollute the envoriment and non corrisiovie to the earth electrode itself. Provision of the connector for connecting electrode with earthing conductor/strip including fastner made of stainless steel/copper/brass as directed having suitable size according to the electrode and earthing conductor dimensions. all the three earthing electrode would be seperated by appropriate distance of not less than 3m and not more than 6m and connected to Each other by and including 25X3mm copper strip to make ring earth and further to be connected to the testpoint and to be buried in appropriate depth not less than 500 mm below the normal ground level and earth pit chamber of suitable size not less than 300mmX300mmX300mm internal dimension made of FRP material complete with flush mounted, removable and locakable cover able to withstand 15kN for Each earth electrode all as directed by engineer in charge.The interconnecting conductor/copper strip shall also be covered with approximately 30 kg of earth enhancing compound for each 3 metres length of strips all to be included in quoted rate itself. The Earth pit inspection chambershould be as perIEC 62561-5 or latest and will be of 300x300x300 mm inside dimension of RCC with 50 mm thick and fine finish.The marking space should be present on RCC Cover.The chamber should have facility for making earth resistance and latst testing date by paint at the cover and previous recorded values inside the cover. Make OBD Bettermann/Fruse/KLK/Erico/True power all as per description of engineer in charge. Note-copper strip of 7.5m length from earthing electrode to the test point and copper strip required for interconnections of rods to make rings of approximately 9metre is included in the quoted rate. 18 Supply and intallation of advance maintance free Single rod earthing system by boring the required nos of holes of dimension 8 to 10 inch wide and length of hole should be less than approximately 2 inches of the electrode length in semi hard soil or hard soil consisting of one Nos UL 467 listed CPRI tested Pure copper tube earth electrode designed in accordance to IS:3043(1987).The system consists of copper tube earth electrode having purity of 99.99%.There is a copper strip inside it which is pressure filledwith highly conductive crystalline mixture of metal alloys and other conductive material.Both the ends of the electrode should be permanently sealed with the extended terminal having two holes at the top for connecting the earthing system to the equipment/load.The Copper tube earth electrode should beof outer dia 50 mm,thickness of rod 01mm and length 03 mtrs tested according to IEC 62561-2 with minimum 10 years life span (the rod should be marked as per the UL certification ) including min 25 Kgs/electrode of earth enhancing compound (PROCEM) NABL certified, CPRI tested eco friendely tested as per the IEC 62561-7 and needs to be considered to fill the 10 inch bored hole surrounding to the electrode. the earth enhancing compound should have restivity less than 50 ohm-meter with chemically inert to sub soil that should not pollute the envoriment and non corrisiovie to the earth electrode itself. Provision of the connector for connecting electrode with earthing conductor/strip including fastner made of stainless steel/copper/brass as directed having suitable size according to the electrode and earthing conductor dimensions..Note-copper strip of 7.5m length from earthing electrode to the test pointis included in the quoted rate.The Earth pit inspection chambershould be as perIEC 62561-5 or latest and will be of 300x300x300 mm inside dimension of RCC with 50 mm thick and fine finish.The marking space should be present on RCC Cover.Make OBD Bettermann/Fruse/KLK/Erico/True power all as per description of engineer in charge 19 Note for item 15 & 16:- (a) the rate shall include excavation of earth,removal of surplus soil and filling with back fill compound etc for completion of the job. (b) earthing resistance result should be less than 2 Ohm. If the result comes more than 2 Ohm, the contractor will be carried out the earthing in seperate location/site or as given by the engineer in charge after taking out of earth electrode all with out any extra cost to the department(c) the contractor willprovide all the required and necessarycertificates as per the specification for required items mentioned above from the same company before incorporting the same in the work as per engineer in charge. and the rep of the company should be avaliable at the site for the installation of the earthing as per their recommendation and specification to obtain the minimum resistance value.(d) testing equipment will be duly tested from authorized goverment.lab/CRPI lab and sealed by the testing authority and produce test certificate of testing equipment before testing for wich no extra payment shall be borne by the department (e) testing of earthing after completionof work will be carried out in presence of the GE, engineer in charge,rep of userand the contractor.(f) contractor/manufacturer will be provided the gurantee for earthing and result for the period of at least Two years. 20 M&L for dismantling of PCC earth pit chamber including excavate the old earthing and making PCC chamber of size as per electrical plate No. 3 of SSR-2009 Part-I with PCC (1:2:4) type B1 including RCC cover with suitable size of handle including excavation and earth work as required at site complete all as specified and directed by the Engineer-in-Charge. 21 S&F in replacement of funnel with wire mesh suitable for each pit as per site requirement complete all as specified and directed. 22 S&F in replacement of RCC cover of earth pit of size as per electrical plate No. 3 of SSR-2009, Part-I complete with suitable handle complete all as specified and directed by the Engineer-in-Charge. 23 M&L for common salt commercial ,for recharging of earthing pits by filling in earthing pits complete all as specified and directed by Engr-in-Charge. (Note:- Recharging materials shall be soluble in water and to be filled/poured in earth pit after mixing in water in appropriate quantity.) 24 M&L for Charcoal dust/Breeze ,etc for recharging of earthing pits by filling in earthing pits complete all as specified and directed by Engr-in-Charge. 25 S&F in replacement of GI tubing 20mm bore medium grade for wateringfrom bottom of earth pit to top of electrodein trenches/floor/fixed along pole/wall forwatering of earthing with proper size of MS clamp, nut, bolts and washers complete all as specified and directed. 26 S&F in replacement of GI tubing 40mm bore light grade in trenches/floor/fixed along pole for cable/earth strip protection with proper size of MS clamp, nut, bolts and washers complete all as specified and directed. 27 S&F in replacement of single pointed air termination aluminium rod 12mm dia, 300mm long to fix on wall/roof/pipes with suitable MS clamp, nuts, bolts and washers as required at site complete all as specified and directed. (Note: MS/PCC repair work shall deemed to be included in quoted rate. 28 Testing of all type of existing earthings in the station by carrying out the following:- (a) Seperating the earthing strip from the test point by opening the nut bolts or by cutting theearthstrip as required and carrying out earth testing by a calibrated digital earth tester of renowned make ( ISI marked) in presenceof JE E/M /Engr-in- charge & rep of user. (b) A earth testing register shall be opened and values to be noted down with signature of rep of user. (c) In case desired values is not achieved ,measure such as watering the earth pit to be done before carrying out retest of same earthing pit. In the event of not achieving the desired value ,earthing pit will be repaired by digging the earth pit to required level and addingsalt & coal or replacement with new earthingas directed . Note:- (1) Wateringofearthing pit to be attain desired value is using water bowser or by any means included the quoated raated (2) In case desired value is not achieved and earthing is required to be repaired or redone new earthing ,same shall be done as per direction of GE/ Engr-in-charge for which rate will be paid separately under relevant items of schedule. (3) Calibrated &ISI marked Earth tester shall be arranged by contractor &included in quoated rate. (4) Earth testing register to be filled with date & signature of rep of user .Unsigned values noted in the register will not be accepted. (5) Broken Earthing pits /funnels /pipe to be replaced for which rates shall be quoated separately BOQ. (6) An experience & qualified manpower shall only be engaged to carrying out the earth testing. (7) Refixing of earthing strip to the test point /brazing /fixing nut bolt to make good the testing strip will be carrying out & to be included in the quoated rate. (8) If retesting of earthing is required after repairs ,same shall be paid extra. 29 Taking down Oldmaterial retrieved from copper/chemical/ GI earthing any type and size. 30 Supply & fix 15 mm Taps of cast iron or malleable cast iron galvanised,screwed for GI pipe and fixed with 15mm dia bore pipe for filling water to earth pit.complete all as specified and directed by Engr-in-charge. 31 Supply & fix 15mm dia stop valves cast copper alloy screwed down high pressures, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge. 32 M&L for pouring of Earth Rechargerwater soluble soil reactivation earthing compound in GEL form per 6 kg bucket comprising of ion and catalyzer for reduction of earth resistance as retaining moisture in the earth pit complete by excavating Earthing pits for pouring of Earth recharger compound gel in Earthing pit by digging 1 feet deep around the earth pit, mixing the earth recharger with 10 litre of water separately and pouring the solution into digged hole slowly slowly within a period of 02 hours,leaving the solution with earth pit for 04 hours and then checking the resistance allas specified and directed by engineer in charge.Make-DSS or equivalent 33 Note :- An amount of Rs. 40,250.00on account of credit schdule for Sch A Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.
Contract Date: Jan 30, 2026 Contract Value : 16.00 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Jammu And Kashmir View Result →
41.
Water Resources and Irrigation #11342285 AOC
Amrut-Supply, Erecting And Commissioning Of Various Pump Sets, Other Necessary Equipment For 107 Mld Sewerage Treatment Plant At Muttathara-Supply, Erecting And Commissioning Of Various Pump Sets, Other Necessary Equipments For 107 Mld Sewerage Treatment Plant At Muttathara-Sewerage Work- 1 SUPPLY, ERECTING AND COMMISSIONING OF PUMP SETS 2 OD149149/2023-2024:Supply, Erecting and Commissioning of 75 HP non clog pump set for RAS (Head – Up to 20 M) 3 OD149154/2023-2024:Supply, Erection and Commissioning of 5 HP non clog pump set for WAS (Total Head :14 M ) 4 OD149153/2023-2024:Supply, Erecting and Commissioning of 5 HP centrifugal dewatering pump set for RAS 5 OD17699/2025-2026:Supply, Erecting and Commissioning of80 HP Submersible pump set for inlet(Head : Up to 20 M) 6 OD18102/2025-2026:Supply, installation, and commissioning of minimum 100 LPH RO water purifier of standard make with 304-grade stainless steel skid and housing, comprising multi-stage purification system including pre-filter, sediment filter, activated carbon filter, RO membrane, UV disinfection unit, auto-flush system, and mineral cartridge; suitable for continuous commercial use and delivering safe, high-quality drinking water. 7 OD18758/2025-2026:Supply of 10 HP portable submersible sludge pump, 3-phase, suitable for handling slurry and sewage, maximum head up to 20 meters, solid handling capacity up to 50 mm, abrasion-resistant impeller, thermal protection, 15 m power cable, and 30 meters of heavy-duty discharge hose (100 mm dia) with quick couplings. 8 Supply and installation soft starter and motorized chain pulley 9 OD149170/2023-2024:Supply of motorized chain pulley block with 3-ton lifting capacity and 10-meter lift height, featuring electric motorized operation with electromagnetic or disc brake system, pendant control for easy operation, limit switches for safety, and overload protection, conforming to IS/ISO standards. 10 OD16970/2025-2026:Supply and installation of soft starter for MCC unit ( For 60 HP motor XS4000,115A,M200-525VACC110/ 220VAC), MNX140 3P 240V CONTACTOR and SEMI CONDUCTOR FUSE 170M3015 11 OD18097/2025-2026:Supplying, fixing, and testing 50W LED hanging type well glass light, weatherproof (IP65) 12 OD18264/2025-2026:Supply and installation of 10-meter hot-dip galvanized double-arm octagonal street light pole with 2×120W LED luminaires, including internal wiring, weatherproof junction box, connections, and earthing. Complete with foundation bolts and RCC pedestal. Includes supply, erection, and commissioning 13 Installation of CCTV camera 14 OD16801/2025-2026:Supplying & fixing HIKVISION 5 MP Varifocal IP Bullet Camera CAMERA 15 OD16892/2025-2026:Supplying, fixing and commissioning 4MP IP DOME CAMERA 16 OD16891/2025-2026:Supplying, fixing and commissioning HIKVISION 4MP IP BULLET CAMERA 40M 17 OD16890/2025-2026:Supplying, fixing and commissioning HIKVISION 32CH NVR 18 OD16889/2025-2026:Supplying, fixing and commissioning 8 PORT POE SWITCH 19 OD16888/2025-2026:Supplying & fixing 6U RACK & ACCESSORIES 20 OD16887/2025-2026:Supplying & fixing 9U RACK& ACCESSORIES 21 OD16886/2025-2026:Supplying & fixing CAMERA BOX 22 OD16885/2025-2026:Supplying & fixing CAT6 CABLE & PIPING (including excavation) 23 OD16884/2025-2026: Supplying and fixing pole with all accessories. 24 OD16920/2025-2026:Supplying and fixing 55-inch, 4K, LED, Smart TV (Samsung/LG/Sony) 25 OD16919/2025-2026:Supplying & fixing RECEIVER & TRANSMITTER UNIT 26 OD16918/2025-2026:Supplying & fixing L & T EXTENSION 5MTR 27 OD16917/2025-2026:Supplying & fixing 5 PORT GIGABYTE SWITCH 28 OD16916/2025-2026:Supplying & fixing HDMI CABLE 3MTR 29 OD16915/2025-2026:Supplying & fixing RACK & PIPE ACCESSORIES, 30 OD16914/2025-2026:INSTALLATION CHARGE FOR CAMERA& NVR 31 OD16913/2025-2026:Supplying & installation of rack 32 New Road formation: Tarring inside STP compound 33 3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m 34 4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method 35 4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. 36 5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means. 37 5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. 38 OD18679/2025-2026:Providing 40mm premixed chipping carpet over BT surface with departmental broken stones after thoroughly cleaning the base with wire brushes, brooms and applying a priming coat of hot bitumen @2.50Kg/10m2 and spreading the hot premix of 0.32m3 of 24mm, 0.22m3 of 12mm departmental metal mixed with 22.08Kg of bitumen per 10m2, rolling to dense surface, then spreading the seal coat comprising of 0.09m3 of 6mm metal mixed with 8.64kg of bitumen per 10m2 and rolling again including cost of bitumen, fuel, hire charges machineries etc. complete excluding the cost of 24mm ,12mm ,6mm metal(Total usage of bitumen 33.22 Kg per 10m2) (I.R.C 3.4.2) 39 OD18716/2025-2026:Supplying and stacking 24mm hard blue granite broken stone in standard heaps-for measurement(IRC 3.2. 1.a) 40 55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a) 41 55.3:Supplying and stacking 6mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a) 42 Infrastructure Improvement Works at STP 43 OD17712/2025-2026:Supply and installation of UV-resistant HDPE with 12mm mesh ( 2meter height) for durability. Support poles are galvanized iron pipes (2-inch dia, 6 ft height) for stability. Stainless steel clamps & UV-resistant plastic ties ensure secure fitting. Concrete footing with excavation and earthwork provides pole stability. Skilled labor ensures proper installation 44 OD17711/2025-2026:Supply and spray a non-toxic, bio-friendly herbicide or a selective herbicide, with an application rate of 5 to 10 liters per hectare, ensuring effective weed control over an area of 1 hectare. 45 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared 46 2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 47 4.2.5:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) 48 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns 49 5.22.4:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelHot rolled deformed bars 50 OD17710/2025-2026:Supply & installation of high-quality polyester sun control film with UV-blocking, heat resistance (99% UV, 60% heat rejection), 2–4 mil thickness, bubble-free installation, and 5-year warranty. 51 OD17709/2025-2026:Fire extinguishers (10L dry powder and 4.5kg CO₂) shall be installed as per IS: 2190 with inspection cards. Fire buckets with MS stands, safety posters, and caution notices in Malayalam and English shall be provided for compliance. 52 Providing roofing for DG, Inlet outdoor panels and mechanical screener 53 100.98.1009:Engaging Fitter ( grade 1). 54 15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 55 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 56 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 57 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 58 50.12.1.1:Providing & fixing PVC corrugated roofing sheets of good quality up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8 mm dia G. I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 59 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns 60 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 61 Replacement of leaking flanged pipes inside the inlet well 62 OD17790/2025-2026:Supply, conveyance, and fixing of 300mm double flanged DI K9 pipe, including scaffolding, fabrication if required (cutting, flange welding), and providing necessary fittings, nuts, bolts, rubber gaskets, and insertion rubber sheets for proper and safe installation at site. 63 OD17835/2025-2026:Dismantling existing 300 mm DI pipes carefully using crane/manual handling with all necessary safety measures, and stacking the removed materials within 50 meters as directed by the Engineer-in-Charge 64 Provision forEntry of Trucks from Rear Side of STP 65 15.7.1:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar 66 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil 67 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 68 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) 69 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 70 50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete 71 50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. 72 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 73 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 74 13.82.1:Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.One coat 75 10.26.3:Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes 76 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work 77 Security room (4m x 3m) at back entrance of STP 78 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 79 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 80 50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete 81 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete 82 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size 83 50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. 84 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). 85 5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform 86 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 87 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 88 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 89 OD17944/2025-2026:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including MS grill with suitable spacing and ISI marked M.S pressed butt hinges bright finished of required size with necessary locking arrangements. 90 OD17947/2025-2026:Electrical work including internal lighting, fan, switches, DB, concealed wiring, and one external LED light with pole/bracket for night visibility, complete with connections, fittings, and testing as per direction of Engineer-in-Charge. 91 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
Contract Date: Jun 23, 2026 Contract Value : 2.52 Crore
Local Bodies No of Bidders 1
42.
Public Administrative Department #11335414 AOC
Tender For Working at Kamala Nehru Hospital under Urban 95 Baby Friendly Hospital-ITEM NO: 1 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. ( SSR Item No: 23.01 ) (PMC Bhavan) Unique No (15297) Rate List Year (2024-2025) ITEM NO: 2 Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. (SSR Item No: 46.09) (PMC Bhavan) Unique No (16016) Rate List Year (2024-2025) ITEM NO: 3 Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. (SSR Item No: 46.29) (PMC Bhavan) Unique No (16034) Rate List Year (2024-2025) ITEM NO: 4 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No: 24.04) (PMC Bhavan) Unique No (15309) Rate List Year (2024-2025) ITEM NO: 5 Providing first class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in plinth including bailing out water manually, striking joints on unexposed faces, pointing with cement mortar 1:3 on exposed face and watering etc. Complete. (SSR Item No: 27.02) (PMC Bhavan) Unique No (15371) Rate List Year (2024-2025) ITEM NO: 6 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. (SSR Item No: 2.09) (PMC ROAD) Item Spec: (MORTH 201) Unique No (86) Rate List Year (2023-2024) ITEM NO: 7 Supplying soft murum at the road site, including conveying and stacking complete. (SSR Item No: 2.29b) (PMC ROAD) Unique No (104) Rate List Year (2023-2024) ITEM NO: 8 Spreading hard murum/ soft murrum/ gravel or kankar for side width complete (SSR Item No: 2.30) (PMC ROAD) Unique No (105) Rate List Year (2023-2024) ITEM NO: 9 Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. (SSR Item No: 2.31) (PMC ROAD) Unique No (106) Rate List Year (2023-2024) ITEM NO: 10 Pervious Concrete Paver Block: 80 mm thickness having porosity 15 to 20% and concrete grade M-30 supply transportation, and fixin on site with all material, transportation, labour all including. (SSR Item No: 1.11) (PMC ROAD) Unique No (205) Rate List Year (2023-2024) ITEM NO: 11 Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb with gutter (as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant (SSR Item No: 7.04) (PMC ROAD) Item Spec: (MORTH 408) Unique No (380) Rate List Year (2023-2024) 25 ITEM NO: 12 Providing and fixing Guard Railing of 1000mm height as per Type D Drg. No. 15 dt. 20-4-79, and fixed in 40 x 40 x 6mm iron, angle embedded in 1:2:4 cement concrete bedding patti as per detailed drawing, with 3 coats of approved of yellow and black paint. (SSR Item No: 7.09) (PMC ROAD) Item Spec: (RD) Unique No (385) Rate List Year (2023-2024) ITEM NO: 13 Transportation of material obtained from excavation including soil, Cu.M rubble, bricks, RCC concrete, kerb stones, steel railing, iron pipes, channels etc. Obtained from excavation, dismantling, loading in a Truck of minimum 5 Cu M capacity or designed capacity and transporting within the municipal limits or any designated place, unloading, stacking or spreading of material etc. complete. As directed by Engineer In charge (SSR Item No: 78.36) (PMC Bhavan) Unique No (17223) Rate List Year (2024-2025) ITEM NO: 14 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (SSR Item No: 32.11) (PMC Bhavan) Unique No (15444) Rate List Year (2024-2025) ITEM NO: 15 Providing and applying priming coat on concrete/ masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. (SSR Item No: 35.21) (PMC Bhavan) Unique No (15571) Rate List Year (2024-2025) 2. ITEM NO: 16 Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. (SSR Item No: 32.34) (PMC Bhavan) Unique No (15466) Rate List Year (2024-2025) ITEM NO: 17 Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. (SSR Item No: 36.11) (PMC Bhavan) Unique No (15587) Rate List Year (2024-2025) ITEM NO: 18 Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. (SSR Item No: 35.09) (PMC Bhavan) Unique No (15560) Rate List Year (2024-2025) ITEM NO: 19 Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning,preparing the plaster surface ,applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item Number 15 to 18 prior approval of Superintending Engineer will be necessary (SSR Item No: 35.26) (PMC Bhavan) Unique No (15576) Rate List Year (2024-2025) ITEM NO: 20 Providing and fixing 12 mm thick waterproof plywood (durian ucotech greenply, mars (marsgold 100% garjan), euro, orchid, century with phenol bonded etc (ISI)) (SSR Item No: 62.11) (PMC Bhavan) Unique No (16542) Rate List Year (2024-2025) ITEM NO: 21 Providing and fixing 19 mm thick waterproof plywood (durian ucotech greenply, mars (marsgold 100% garjan), euro, orchid, century with phenol bonded etc (ISI)) (SSR Item No: 62.12) (PMC Bhavan) Unique No (16543) Rate List Year (2024-2025) ITEM NO: 22 Wall Painting art work painting artistic work on any type of surface and at any height using scaffolding with skilled artists as per the instructions of site incharge.measurement will be as per actual max.size of art.rate for background apex paint and lettring will be paid seperately (SSR Item No: 63.4) (PMC Bhavan) Unique No (16694) Rate List Year (2024-2025) ITEM NO: 23 Providing & Fixing in position, MS fabrication work using angles, sqr tubes, c channels etc for various partition frame as per Design & Instructions & Complete in all aspects including all materials labour, finishing etc complete (SSR Item No: 51.16) (PMC Bhavan) Unique No (16167) Rate List Year (2024-2025) 6 ITEM NO: 24 Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes.complete. (SSR Item No: 6.12a) (PMC ROAD) Item Spec: (MORTH 803.4) Unique No (251) Rate List Year (2023-2024) ITEM NO: 25 Stamped Concrete :- Thin overlay approximately 1/32 to 5/16 (thicker application may be nessecery in some situations) of stamped concrete overlays over M-20 concrete of 100 mm thick-surface, interior, applied smooth, textured or stamped in various patterns and designs using stamps and seamless texture skins, then antiqued, chemically stained or integrally colored and sealed with the appropriate coating. Systems sealers or protective top coats according to the job conditions and specifications. (including the cost of M-20 concrete of 100 mm thickness) (SSR Item No: 1.10) (PMC ROAD) Unique No (204) Rate List Year (2023-2024) ITEM NO: 26 Providing & fixing BENCH IN CEMENT MORTOR/CONCRETE WITH WOODEN FINISHING ON ALL EXTERNAL SURFACE. Bench should have min. 2.1m to max. length 2.4m with 0.45m wide seat & 0.40m high back for resting. beach should have 2 to 3 supports/Legs as per requirement from ground in 1:1.5:3 ratio Concrete with 4 bar 12mm as a main & distribution 8mm Tor steel at 150mm c/c. Rate includes proper cleaning of surface by sand paper application of 1 coat of Apex exterior grade primer above that 2 coat of exterior grade Apex Paint as a base coat & 1 coat of Apex Paint for making wooden finish/grains & with 2 final coat of Apex clear polish including Cement, Sand, Aggregate, chemical, adhesive, chickenmesh, primer, paint, polish, paper, etc. all material, labor, scaffolding, excavation, pcc, tor steel etc. all complete. Work done should be as per a approved sample & the instructions of engineer incharge. (SSR Item No: 3) (PMC Garden) Unique No (19719) Rate List Year (2024-2025) ITEM NO: 27 PROVIDING and laying Natural River Sand in Play Area or required locations in Gardens, as per the instructions given by the Engineer Incharge, inclusive of material, Labour, Transportation,, etc all complete. (SSR Item No: 10) (PMC Garden) Unique No (19726) Rate List Year (2024-2025) ITEM NO: 28 Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 guage Alluminium sheet including Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having pressure sensitive/ heat activated adhesive, IRC Specified colour retro reflective cutout border & messages having pressure sensitive adhesive having border & messages in IRC Specified colour background, including one One Number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Alluminium sheet Type IV High Intensity Micro-Prismatic Grade Sheeting (SSR Item No: 6.54) (PMC ROAD) Item Spec: (IRC-67 2012) Unique No (339) Rate List Year (2023-2024) ITEM NO: 29 DOUBLE POST SWING (Proving and Fixing) Rec. Age :- 4-14 yrs. The area :- 3.5 x 1.0m Safe play area :- 4. X 2.0m The leg supports of the single post swing is made up of 150 NB while the top bar is of 50 NB GI pipes. The Gl pipes are powder coated. All pipes are A class pipes, The two swings are made up of 10mm thick skid reinforced. The seats of the single support swing are made up of 10 mm thk rubber with anti skid. The rubber seat is suspended on 6mm thk gi chain. The ball bearings of brands like SKF, FAQ are mounted inside a specially designed nylon clamp. All pipes are B class pipes All Structures are to be Powder Coated. All Work Done As Per General Raw Material Sheet Added Below. Work done should be as per Engineer incharge Instructions (SSR Item No: 3) (PMC Garden) Unique No (19526) Rate List Year (2024-2025) ITEM NO: 30 FROG BIN DUSTBIN (Proving and Fixing) Height: - 850 mm Dia : 600 mm This fish is made in pure polyester Fiberglass Reinforced Plastic of 2mm thk with MAT finish to give it a mirror image and it is corrosion resistance. This attractive frog shape attracts children towards it because of its eyes, hands, legs. As the children have habit of throwing the trash on the road or in the park, this encourages children to avoid littering, which creates an unhealthy and aesthetically unpleasant social environment. The trash is to be put through the mouth of the frog. Work done should be as per Engineer incharge Instructions. (SSR Item No: 73) (PMC Garden) Unique No (19596) Rate List Year (2024-2025) ITEM NO: 31 Providing and Installing EPDM (Ethylene Propylene Diene Monomer) Rubber flooring19mm thickness would be made of Black Styrene Butadiene Rubber for buffing purpose System with thickness upto 25 mm consisting of sandwich two layers, base layer having and top finished layer of 6 mm would be made of size 1-4 mm Ethylène Propylene Diene Monomer with 1 year Warranty. 2745.00/- Per Sq.m (Excluding G.S.T.) (SSR Item No: 72.6) (PMC Bhavan) Unique No (17101) Rate List Year (2024-2025) ITEM NO: 32 Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. (SSR Item No: 27.12) (PMC Bhavan) Inique No (15380) Rate List Year (2024-2025)
Contract Date: Jun 22, 2026 Contract Value : 27.64 Lakh
Local Bodies No of Bidders 7
Maharashtra View Result →
43.
Power #11334917 AOC
Tit-bit civil work along with Repair and Maintenance of Chakdha (west) CCC Building. (Estimate as per P.W.D. S.O.R.Vol I &II for the area of Kalyani Sub-Division in the district of Nadia w.e.f. 01.11.17 and all other corrigenda uptodate ) - 1 Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m .a) In ground floor including roof 2 b) In first floor 3 Dismantling all types of masonry excepting cementconcrete plain or reinforced, stacking serviceablematerials at site and removing rubbish as directedwithin a lead of 75 m.a) In ground floor including roof 4 b) In first floor 5 Dismantling all types of plain cement concreteworks, stacking serviceable materials at site andremoving rubbish as directed within a lead of 75m.In ground floor including roof.(a) upto 150 mm. thick 6 b) In first floor 7 Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof 8 b) In first floor 9 Earth work in excavation of foundation trenches ordrains, in all sorts of soil (including mixed soil butexcluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m.as directed. The item includes necess-ary trimming thesides of trenches, levelling, dress-ing and ramming thebottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm 10 Earth work in filling in foundation trenches or plinthwith good earth, in layers not exceeding 150 mm.including watering and ramming etc. layer by layer complete. (Payment to be made on the basis ofmeasurement of finished quantity of work)(a) With earth obtained from excavation of foundation 11 Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. 12 Cutting holes and subsequent mending good damages. (a) Diameter upto 150 mm. (i) In brick work [Cement-4.0 Kg/Mtr] 13 Cutting chase upto 125 x 150 mm. and subsequentmending of damages.(a) in brick wall [Cement-3.6 Kg/Mtr] 14 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineerin charge. 15 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 16 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any as per relevant IS codes. a) Pakur Varietya) In ground floor 17 b) In first floor 18 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominalsize) excluding shuttering and reinforcement,if any, in gound floor as perrelevant IS codesPakur variety 19 1st floor 20 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Varietya) In ground floor 21 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.a) For works in foundation, basement and upto roof of ground floor / upto 4m.(iii) other manufacturers not specified. 22 Brick work with 1st class bricks in cement mortar (1:6)a)in foundation & plinth 23 In Super structure, ground floor 24 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.a) In ground floor 25 b) In first floor 26 Supplying, fitting & fixing 1st quality Ceramic tiles in wallsand floors to match with the existing work & 4 nos. of keystones (10mm) fixed with araldite at the back of each tile &finishing the joints with white cement mixed with colouringoxide if required to match the colour of tiles includingroughening of concrete surface, if necessary or by syntheticadhesive & grout materials etc.(B) Wall-------------------------With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m-----------ii) Other than Coloured decorative including white----------i) Gr.floor 27 A) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m& joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m----- Other than Coloured decorative including white-------i) Gr.floor 28 Supplying and laying true to line and level vitrified tiles ofapproved brand (size not less than 600 mm X 600 mm X 10mm thick) in floor, skirting etc. set in 20 mm sand cementmortar (1:4) and 2 mm thick cement slurry back side of tilesusing cement @ 2.91Kg./sqM or using polymerised adhesive(6 mm thick layer applied directly over finished artificial stonefloor/Mosaic etc without any backing course) laid afterapplication slurry using 1.75 Kg of cement per sqM belowmortar only, joints grouted with admixture of white cementand colouring pigment to match with colour of tiles / epoxygrout materials of approved make as directed and removal ofwax coating of top surface of tiles with warm water andpolishing the tiles using soft and dry cloth upto mirror finishcomplete including the cost of materials, labour and all otherincidental charges complete true to themanufacturer sspecification and direction of Engineer-in-Charge. (Whitecement, synthetic adhesive and grout material to be suppliedby the contrr]e)I(I) With application slurry @1.75 kg/ Sq.m, 20 mm sandcement mortar (1:4) & 2 mm thick cement slurry at back sideof tiles, 0.2 kg/ Sq.m white cement for joint filling withpigment.(A) Light colour(Gr.floor) 29 (ii) First floor 30 Rendering the Surface of walls and ceiling with White Cement baseWATER PROOF wall putty of approved make & brand.(1.5 mm thick)----------(i) Ground floor 31 In 1sl floor 32 Labour for taking out door and window frame including shutter for repair orreplacement of different parts of the frame & refixing the same including mendinggood all damaes complete. (Concrete and brick work for mending damage will bepaid separately)(a) Upto area 2.5 Sq.m 33 M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S. W.I. flats and bars for windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.i) Grill weighing above 16 Kg./sqm------------a) In ground floor 34 b) In first floor 35 Removing old scales, blisters etc. of interior surface of walls,ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable for receiving distemper. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) 36 1st floor 37 M.S. structural works in columns, beams etc. with simple rolledstructural members (e.g. joists, angle, channel sections conformingto IS: 226, IS: 808 & SP (6)- 1964 connected to one another withbracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming toIS: 816- 1969 & IS: 1995 using electrodes of approved make andbrand conforming to IS:814- 2004, haulage, hoisting and erectionall complete. The rate includes the cost of rolled steel section,consumables such as electrodes, gas and hire charge of all tools andplants and labour required for the work including all incidentalchages such as electricity charges, labour insurance charges etc 38 Supplying, fitting and fixing windows and ventilators with or withoutintegrated grills conforming to IS 1038-1975 and manufacture from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket,handle plate etc, including hoisting in position,straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing fixed with neceessary clamps and nuts and bolts and erected complete.(ii) below 50mm.Fixed type steel windows as per IS sizes with horizontal glazing bars 39 (b) Openable steel windows as per IS sizes with side hung shuttersand horizotal glazing bars. [The extra rate admissible for theopenable portion only] 40 steel peg stay 300 mm long including fitting and fixing. 41 Two point nose steel handle including fitting and fixing. 42 Taking out M.S. or W.I. Grills from wooden frame including cuttinglugs from masonry wall and refitting the same and mending gooddamages after repairs. (Excluding the cost of necessary repair ofdamages) or doing any other necessary works 43 Easing, oiling and adjusting the steel shutters including scraping allmembers and fitting so as to make the shutters easily operable (noextra payment will be made for taking out and fixing glass, ifnecessary). 44 Renewing M.S. members of steel shutters by welding including takingout the old, mending good damages complete, including taking outand refixing the glass panes. 45 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(c) Sal : Locala) In ground floor 46 Panel shutters of door and window, as per design (each panel consisting of singleplank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.In ground floor.(In case of non-supply of single plank, penal rate of reduction of 20% will be made)iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. 47 Brass floor door stopper. 48 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed. a) With continuous plate base (Hexagonal / Round rod), (i)75 mm grip x 10 mm dia rod. 49 Iron butt hinges of approved quality fitted and fixed with steel screws, with ISImark.vi) 100mm. X 75mm. X 3.5 mm 50 Anodised aluminium barrel / tower / socket bolt (full covered) of approvedmanufactured from extruded section conforming to I.S. 204/74 fitted and fixedwith cadmium plated screws:ix) 300mm long x 10mm dia. bolt. 51 Anodised aluminium Aldrop / Sliding bolts of approved quality manufacturedfrom extruded section conforming to I.S. specification (I.S. 2681/66) fitted andfixed complete.----------300mm x 16mm dia. Bolt 52 Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete. 53 PVC Door Shutter-37 mm thick-Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc. In ground floor. 54 Supplying profiles of required section made of Aluminium AlloyExtrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work).In 10-12 Micron thickness Annodizing film. i)natural White k) Movable door shutter .Door frame (top & sides) 55 ii) Shutter :Top rail 56 Bottom rail 57 Door Vertical 58 Lock rail 59 Glazing cleap 60 Labour charge for fabrication and installation of composite door,window, partitions made from annodized extruded alloy aluminium sections for the following units:- (B) Partly glazed partly panelled or fully glazed single leaf alunminiumswing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry setneoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge. 61 Supplying bubble free float glass of approved make and brandconforming to IS: 2835-1987. i) 4mm thick clear glass. 62 5mm thick clear glass 63 Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filledwith foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) . (b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) 64 Supplying profiles of required section made of Aluminium AlloyExtrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work).(A) In 10-12 Micron thickness Annodizing film. i)natural White j)Fixed partitions.(Unsupported length of vertical member upto 1.5 mtr. Height of both endsof vertical member restrained but panels within 0.9 sq.m.)Top,bottom & side member 65 Intermediate member. 66 Glazing clip. 67 Supplying heavy duty hydraulic double action floor spring along with toppin/set of pivots conforming to IS: 6315 or any approved make as perdirection of Engineer in charge. 68 Supplying heavy duty top pin/set of pivots of local make and approved by the Engineer-in-charge. (This item to be provided where floor spring not 69 Supplying concealed type heavy duty PVC headed aluminium tower boltfor double leaf doors as per approved make and brand as per direction ofEngineer-in-Charge.250 long 70 Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.(weatger gasket/woolpile) 71 Filling the gap in between aluminium frame & adjacent RCC / Brick/ Stone work by providing weather silicon sealant over 6mm dia backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete. Upto 5 mm depth and 5 mm width 72 Extra for each additional floor. 73 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including, rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface including threading nosing and drip course where necessary.i) With 1:6 cement mortar.a) 20 mm thick plaster.in ground floor 74 a.2) In first floor 75 15 mm th.b.1) In ground floor. 76 b.2) In first floor 77 ii) With 1:4 cement mortar.c) 10 mm thick plaster.c.1) In ground floor 78 Neat cement punning about 1.5mm. thick in wall, dado, window sills, floor, drain etc. 79 Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) 80 Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)i) Standard Quality 81 Applying Exterior grade Acrylic Primer of approved quality and brand on plastered or concretesurface old or new surface to receive decorative textured (mat finish) or smooth finish acrylic exterior Immersion paint including scrapping and preparing the surface thoroughly, complete as per manufacturers specification and as per direction of E.I.C(i)One coat in ground floor 82 2) In first floor 83 Protective and decorative Acrylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrylic primer as required.The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.b) NORMAL Acrylic Emulsionin ground floor(two coat) 84 2) In first floor(Two coat) 85 Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint. 86 a ) Priming one coat on timber or plastered or surface with synthetic oil bound primer of approved quality including smooth ening surfaces by sand papering etc. (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) 87 b ) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) 88 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary.(a) On timber or plastered surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) 89 (b) On steel or other metal surface :--------With super gloss (hi-gloss) ------(iv) Two coats (with any shade except white) 90 (iii) One coat (with any shade except white) 91 Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) (i) 3 mm thick (weighing 7.4 kg/Sq.m) 92 (ii) 4 mm thick 93 Renewing worn out putty of glass panes :(a) Panes not exceeding 0.2 Sq.m 94 Supply fitting approved type ventilator in position after cutting holes in walls setting in cement mortar, mending damages to wall and plaster and two costs of point of approved brand and shade.(b) R.C.C ventilator of 20 mm. thicki) Upto 0.10 Sqm. Area 95 Artificial stone in floor, dado, staircase etc with cement concrete(1:2:4) with stone chips, laid in panels as directed with toppingmade with ordinary or white cement In ground floor. (as necessary) and marble3 mm. thick topping (High polishing grinding on this item is notpermitted with ordinary cement).(ii) 25 mm th.(i) Ground floor 96 Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wallafter unscrewing bolts, nuts, screws etc.andstacking the material at site as directed. 97 Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor)(i) In Roof:-b) With 0.60 mm thick sheet 98 (ii) In wall:-a) With 0.60 mm thick sheet 99 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor).(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. 100 (f) 25 mm to 30 mm shuttering without staging in foundation 101 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming toIS:13592-1992 with all necessary clamps nails, including making holes inwalls, floor etc. cutting trenches in any soil through masonry concretestructures etc if necessary and mending good damages including joining withjointing materails (SpunYarn,Valamoi/Bitumen/M-Seal etc) complete.A) UPVC Pipes:(ii) 110 mm. Dia. 102 B) UPVC Fittings:a) Plain Tee(ii) 110 mm. Dia 103 b) Plain Y(ii) 110 mm. Dia 104 c) Bend 87.5 degree (ii) 110 mm. Dia 105 d) Shoe c(ii) 110 mm. Dia. 106 Uprooting and removing plants from the surface of wallsparapet etc and making good damages. (Repairing ofdamages to be paid separately) 107 Renewing throating,nosing or drip course moulding with 15 mm.thick cement plaster (1:4) complete. (Cement 0.7Kg/Mtr.)In ground floor. 108 Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in- Charge prior to execution will be necessary).(Payment to be made on area cleared) 109 Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union cross, elbow nipple, long screw reducting socket reducing tee, short piece etc. fitted withholder bats clamps, including cutting pipes, making threads, fitting fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground (payment will be made on the center line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials) FOR EXPOSED WORK15MM DIA MEDIUM QUALITY 110 ii) 20 mm dia medium quality 111 ii) 25 mm dia medium quality 112 Chromium plated round shower with revolving joint (Equivalent toCode No. 541(N) & Model - Tropical / Sumthing Special of ESSCO orsimilar brand). 113 Supplying, fitting and fixingpillar cock ofapproved make---CP pillar cock-15mm(Equivalent to Code No. 507 & Model -Tropical / Sumthing Special of ESSCO or similar brand) 114 Supplying, fitting, fixing G.M wheel valve of approved brand and made tested to 21 Kg. Per sq. cm. (for water lines only.) --- i)20mm. 115 ii)25mm 116 11)40mm 117 Supplying fitting fixing bib cock Chromium plated Bib Cock short body (Equivalent to Code No. 511& Model - Tropical / Sumthing Special of ESSCO or similar brand). 118 b)i.Chromium plated Stop cock [Equivalent to Code No.513(A) & 513(B) & Model - Tropical/Sumthing of ESSCO or similar brand] 119 Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver redas per I.S. 3438 / 1965 together with brass C.P. hinges.(i) 450 mm X 300 mm 120 Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. b) With S trap (with vent) 121 Supplying, fitting and fixing towel rail with two brackets.a) C.P. over brass.b) I) 25 mm dia and 450 mm long 122 Supplying, fitting and fixing 18 mm. thick marble partition slab with chawk doongri marble square cut, both sides polished with two front corners rounded and edges polished. 123 Supplying, fitting and fixing white vitreous china best quality approvedmake wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks,C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillarcock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approvedquality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approvedquality P.V.C. connection pipe with heavy brass C.P. nut includingmending good all damages and painting the brackets with two coats ofapproved paint.(i) 450 mm X 300 mm size 124 Supplying, fitting and fixing Orissa pattern water closet in white glazedvitreous chinaware of approved make in position complete excluding P orS trap (excluding cost of concrete for fixing).(i) 580 mm X 440 mm each 125 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. Specification withP.V.C fitting complete, C.I. brackets including two coats of painting to bracket etc. 126 Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make withnecessary fixing materials and clamps complete.i) Polythene Flush Pipe 127 Flat back urinal (half-stallin urinal)in white vitreous china ware of approved make (CERA/HINDWARE)supplied,fitted and fixed in position with brass screw on75mmx75mmx75mm wooden block complete. (i) 635 mm X 395 mm X 420 mm each 128 Supplying ,fitting and fixing approved brand p.v.c. connector white flexible ,with both ends coupling with heavy brass C.P.nut 15mm dia.(i) 300 mm long 129 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe,with PVC coupling at one end fitted with necessary clamps.900 mm long 130 Approved patent vent cowl I.C.I. conforming to I.S.S.a) 75 mm dia. 131 Supplying PVC water storage tank approved quality with closed top with lid (block). Multilayer. a) 1500 Litre capacity. 132 Labour for dismantling (i) 15 mm 133 (ii) 20 mm 134 100 mm 135 Refixing GI pipe with fittings with cleaning wher necessary(i) 15 mm 136 (ii) 20 mm 137 Removing chokage in G.I pipe including cleaning pipe(i) 15 mm 138 (ii) 20 mm 139 Renewing C.I. clamp for pipe including cutting hole in wall etc. and mending good all damages with cement concrete(4:2:1) with jhama chips and cement plaster (6:1) to match with and curing.15mm 140 (ii) 20 mm 141 Dismantling wash basin with brackets with or without waste fittings. 142 Dismantling E.P. or Anglo-Indian W.C. 143 Dismantling urinal. 144 Dismantling pillar cock of wash basin. 145 Cleaning glazed tiles with acid 146 Mazdoor 147 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings asrequired,jointing materials and two coats of painting with approved paintin any position above ground. (Payment will be made on the centre linemeasurements of total pipe line including all specials. No separatepayment will be made for accesories, specials. Payment for painting willbe made seperately)(a) For Exposed Work PVC Pipes 15mm 148 20 mm metredia 149 25 mm metredia 150 40 mm metredia 151 Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (a) Sink only (i) 530 mm X 430 mm x 180 mm 152 Supplying, fitting and fixing 15 mm swan neck tap with left & right handoperating nob with aerator (Equivalent to Code No. 510, 510(A) andModel - TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand 153 Iron door ring of approved quality fitted and fixed with nut and washer complete. (i) 50mm dia. 154 Rendering the Surface of walls and ceiling with White Cement baseWATER PROOF wall putty of approved make & brand.(1.5 mm thick) 155 ii) Godrej Hydraulic door closer fitted and fixed complete.(c) Light type 156 Filling in foundation or plinth by fine sand inlayers not exceeding 150 mm as directed andconsolidating the same by thorough saturation withwater, ramming complete including the cost of supplyof sand. (payment to be made on measurement offinished quantity) 157 Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed.(a) Upto 20 users:-(ii) Beyond a lead of 150 metre and outside the Municipal limit 158 Cleaning rubbish, sludge, weeds scum, liquid earth, mud etc.etc.from road side masonary drain/ hume pipe drain/ culvert etc. by mathor labour after removing concrete.Slab/manhole cover etc.without damaging the same and refixing the same properly after cleaning as necessary and removing the sludge etc.etc.by using iron pans,buckets including all labour, tools & plants including removing the spoils in dry condition and disposing the same by truck beyond the road side in conformity with municipal/corporation rules for such disposal including loading into truck and cleaning the road side in all respects as per direction of the Engineerin-Charge. 159 Renewing profile of rolling shutter including fitting fixing complete as per existing size and shape 160 Labour for taking out rolling shutter (only shutter portion) dismantling by parts for repair or (replacement of damaged parts only), rehanging and refitting the same in position after necessary repairs (excluding the cost of supply of new parts 161 Easing and oiling, cleaning collapsible gate and repairing to locking arrangements. 162 Easing and oiling, cleaning rolling shutters excluding repair to inside locks 163 Easing and oiling W.I. Gate or G.I. Gate. 164 Labour for hoisting plastic water storage tank.(i) Upto 1500 litre capacity.(a) Upto 1st story from G.L. 165 Extra for each additional story 166 Labour for lowering plastic water storage tank and stacking in places asdirected.(i) Upto 1500 litre capacity 167 (b) Extra for each additional story 168 Labour for punching hole in plastic water storage tank upto 50 mm dia 169 Labour for taking out (from fencing) line of wire (galvanised,strand or barbed) by drawing the same out through holes in thebody of the post or through holes formed by fixed staples.(Payment to be made on the length of the wire taken out.) 170 ) Supplying, fitting galvanised 3 ply 12 gauge / 4 points line ofbarbed wire in fencing (holes already made in the body of the post)or fixed by staples tightening and fixing the wires in taut conditionwith straining bolts including the cost of cutting and of lappingjoints in the wire as necessary but excluding the cost of galvanisedstaples,straining bolt and binding wire where necessary. 171 Supplying galvanised straining bolts (with eye at one end with double nuts and washers) fitted and fixed complete. (i) 10 mm. dia. (a) 150 mm 172 Supplying galvanised staples fitted and fixed complete. (a) 19 mm. to 25 mm. size
Contract Date: Jun 23, 2026 Contract Value : 5.85 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
44.
Heavy Industries and Public Enterprises #11321092 Technical Bid
Tender For Civil And Mep Works For Setting Up Hindlabs Minor Lab, Barpeta, Assam- 1 Civil Works 2 Solid Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 30X20X15Cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level With Thickness 15Cm In : Cm 1:6 ( 1 Cement : 6 Coarse Sand) Etc Complete 3 12 Mm Cement Plaster Of Mix:1:6 (1 Cement : 6 Fine Sand). 4 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade:New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) 5 Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface:Water Thinnable Cement Primer 6 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 7 Providing And Laying Premiumvitrified Tiles In Floor In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) Jointing With Grey Cement Slurry @3.3 Kg/Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc. The Tiles Must Be Cut With The Zero Chipping Diamond Cutter Only . Laying Of Tiles Will Be Done With The Notch Trowel, Plier,Wedge, Clips Of Required Thickness, Leveling System And Rubber Mallet For Placing The Tiles Gently And Easily.Glazed Vitrified Tiles Matt/Antiskid Finish Of Size Size Of Tile 600 X 1200 Mm 8 Providing And Laying Premium Vitrified Wall Tile In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600 X 1200 Mm 9 Providing And Fixing Fiber Glass Reinforced Plastic (Frp) Door Frames Of Cross- Section 90 Mm X 45 Mm Having Single Rebate Of 32 Mm X 15 Mm To Receive Shutter Of 30 Mm Thickness. The Laminated Shall Be Moulded With Fire Resistant Grade Unsaturated Polyester Resin And Chopped Mat. Door Frame Laminate Shall Be 2 Mm Thick And Shall Be Filled With Suitable Wooden Block In All The Three Legs. The Frame Shall Be Covered With Fiber Glass From All Sides. M.S. Stay Shall Be Provided At The Bottom To Steady The Frame. 10 Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. 11 Providing And Fixing To Existing Door Frames.30 Mm Thick Fiberglass Reinforced Plastic (F.R.P) Flush Door Shutter In Different Plain And Wood Finish Made With Fire Retardant Grade Unsaturated Polyester Resin, Moulded To 3 Mm Thick Frp Laminate All Around, With Suitable Wooden Blocks Inside At Required Places For Fixing Of Fittings And Polyurethane Foam (Puf) / Polystyrene Foam To Be Used All Filler Material Throughout The Hollow Panel, Casted Monoolithically With Testing Parameters Of F.R.P. Laminate Conforming To Table - 3 Of Is : 14856, Complete As Per Direction Of Engineer- In-Charge. 12 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 13 Supplying And Fixing Cp Health Faucet Superior Quality ( Jagur Or Equvalent Make ) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. 14 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 15 Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per Is 13983 With C.I. Brackets And Stainless Steel Plug 40 Mm,With Swan Neck Faucet With Pipe In Let And Drain Provision, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required:Kitchen Sink With Drain Board510X1040 Mm Bowl Depth 250 Mm 16 Providing And Fixing Ptmt Liquid Soap Container 109 Mm Wide, 125 Mm High And 112 Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour, Weighing Not Less Than 105 Gms 17 Providing And Fixing Cp Towel Rod Complete Fixed With Cp Brass Screws Of Approved Quality Of Minimum 600Mm Length Approved As Per The Requirement Of Engineer In Charge. 18 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions: 45 Cm Length15 Mm Nominal Bore 19 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. Flexible Pipe 40 Mm Dia 20 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is: 893115 Mm Nominal Bore 21 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 15 Mm Pipe 10Kgf/Cm2 22 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge.Concealed Work,Including Cutting Chased And Making Good The Wall Etc. 20 Mm Pipe 12 Kgf/Cm2 23 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 32 Mm Dia 6 Kgf/Cm2 - External Work - Exposed On Wall 24 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 25 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement -75 Mm Dia 45 Degree Elbow 26 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 75X75X75 Mm Dia Door Tee 27 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 75 Mm Dia Bend 28 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge.Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 50 Mm Pipe 10 Kgf/Cm2 29 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes,Including Jointing With Pvc Solvent Cement - 75 Mm Dia Vent Cowl 30 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement -75 Mm Dia End Cap 31 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement -110 Mm Dia End Cap 32 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 110X110X110 Mm Dia Door Tee 33 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement- 110 Mm Dia Bend 34 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/Clips At 1.00 M Spacing. This Included Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 75 Mm Dia 6Kgf/Cm2 - External Work- Exposed On Wall 35 Providing And Fixing 12 Mm Thick Frameless Toughened Glass Partition Of Approved Brand And Manufacture, Including Top & Bottom Fixing Arrangement And Making Necessary Holes Etc. For Fixing Required Fittings, All Complete As Per Direction Of Engineer-In-Charge. 36 Providing And Fixing 12 Mm Thick Frameless Toughened Glass Door Shutter Of Approved Brand And Manufacture, Including Providing And Fixing Top & Bottom Pivot & Double Acting Hydraulic Floor Spring Type Fixing Arrangement And Making Necessary Holes Etc. For Fixing Required Door Fittings, All Complete As Per Direction Of Engineer-In-Charge ( Door Handle, Lock And Stopper Etc To Be Paid Separately) 37 Providing And Fixing Ss H Handle Having Min 45 Cm Length In Toughed Glass Door Including All Necessary Screws Etc. Complete. 38 Providing And Fixing 3M Fasara Frosted Etching Film Of Thickness 25 Microns Self- Adhesive Of Approved Colour, Shade, And Quality With Cutting As Per Approved Design And Pattern, Including Cleaning Of Glass And Making Surface Smooth For Fixing Of Film To The Surface, All Completed As Per The Direction Of The Engineer In Charge. 39 Providing And Fixing Of Glass Door Ss Patch Lock With Out Handle In Toughened Glass Door Including All Necessary Screws Etc. Complete 40 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is : 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing /Paneling, C.P. Brass/ Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge.(Glazing, Paneling And Dash Fasteners To Be Paid For Separately):For Fixed Portionpowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 41 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/ Neoprene Gasket Required (Fittings Shall Be Paid For Separately)Anodised Aluminium ( Anodised Transparent Or Dyed To Required Shade According To Is : 1868, Minimum Anodic Coating Of Grade Ac 15) 42 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is : 12823 Grade I Type Ii, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer - In- Charge.Pre- Laminated Particle Board With Decorative Lamination On Both Sides 43 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item):With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) 44 Filling The Gap In Between Aluminium/ Stone/ Wood Frame And Adjacent Rcc/ Brick/ Stone/ Wood/ Ceramic/ Gypsum Work By Providing Weather/Structural Non Sag Elastomeric Pu Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete,Complying To Astm C920, Din 18540-F & Iso 11600Upto 5 Mm Depth And 5 Mm Width 45 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 46 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Single Rubber Stopper 47 Providing And Fixing Bright Finished 100 Mm Mortice Lock With 6 Levers Without Pair Of Handles Of Approved Quality For Aluminium Door, With Necessary Screws Etc Complete As Per Direction Of Engineer- In- Charge. 48 Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm), With Necessary Accessories And Screws Etc. Complete. 49 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:300X10 Mm 50 Vinyl Transparent Vision Glass Stickers: Supply And Pasting Of Vinyl Transparent Vision Glass Stickers In Approved Size And Design In Glass Partition And Door As Per The Instruction Of Engineer In Charge. 51 Backlit Acrilic Board With Projected Letters: Supply, Installation, Testing And Over Suitable Welded And Painted 25X25X3Mm Ms Angle Frame In Suitable Location And In Proper Line And Level With All Necessary Fastners, Supports Etc. Electrical Works Likes Electrical Wirings, Connections, Fittings, Externaly Fixed Weather Proof 2/3 Pin Plug Points And Sockets Including Boxes Etc. To Be Complete Properly. All Fabrication And Fixing Should Be Done As Per Approved Design And Instructions Of Engineer In Charge. (Note: Only Front Elevation Will Be Measured.) 52 Furniture 53 Supply And Erection Of Airport Type 3 Seater Waiting Chair With Powder Coated Chromium Finish Having Minimum Dimensions 1675Mm Length X 710Mm Width X 775Mm Total Height And 400Mm Seat Height . Seat: High Quality Cold Rolled 1.2Mm Thick Steel Perforated Sheet Pressed And Welded To Form The Shape. Arm & Leg: High Quality 1.2Mm Thick Ms Tube / Sheet . Cross Bar: High Quality Cold Rolled 2Mm Thick Steel Sheet Pressed And Welded To Form The Shape. 54 Supply Of Phlebotomy Chair With Optimum Design Made Up Of Ms Power Coated Frame And Up Upholstery Type Seat,Back Rest And Arm Rests.Both Side Arm Rest Should Be With Height And Position Adjustable System And All As Per The Instruction Of Engineer In Charge. 55 L-Type Workstation Of Overall Size (1350 * 600)Mm + (1000 * 450)Mm X 750 Mm (L X D X H) And Pedestal Unit Made Up Of 18 Mm Thick Exterior Grade-I Mdf Board On All Sides Conforming To Is:14587 From Approved Makes Such As Century/Greenply/Fineply Or Equivalent With Decorative Laminate On Both Side And All Edges To Be Fixed With 2Mm Thick Pvc Edge Beading. One Three-Drawer Modular Pedestal Unit Of Minimum Size 450 Mm (W) X 500 Mm (D) X 650 Mm (H) All With Retractable Key Board Tray, Drawer Channels, Hinges, Handles, Individual Locking System, And All Necessary Fittings And The Workstation Should Have An Electrical Flip Box With 2 Nos Universal Power Socket & 1 No Data Socket Etc And Cable Management Tray. All Work As Per The Approved Design And Instruction Of The Engineer-In-Charge/Architect. 56 Providing And Erection Of Reception Counter Table Of Length 1200 Mm And First Level Should Be Provided At A Height Of 750 Mm And Width 600 Mm And The Second Level At A Height Of 1050Mm From Base With A Width Of 300. The Table Made Of 18Mm Thick Pre Laminated Medium Density Board Of Exterior Grade (Grade I) Is: 14587:1998 With Decorative Laminated Finish On Both Sides And 2 Mm Thick Pvc Beading On All Edges, Including Electrical Flip Box, Cable Measurement Tray, Grommets With 3 Nos Universal Power Socket And Ethernet Port, Three Drawer Pedestal Unit With Drawer Channel, Handles, Hinges, Lock All Complete As Per Approved Drawing And Installation Of Engineer In Charge/Architect. 57 Supply And Installation Of Visitors Chair Medium Back, Mesh Back Cushion Seat With Fixed Supports Made Of 304 Stainless Steel/ Powder Coated Ms Of Approved Colour Or Shade As Per The Instruction Of The Engineer In Charge 58 Revolving Chair: Medium Back Ergonomic Chair With Five Nos. Star Shaped Nylon Base. Castor: 50Mm Diameter Nylon Twin Wheel, Gas Lift Height Adjustment, Back Angle Adjustment , Fixed Armrest Providing Natural Resting For Arms. Seat With Pu Coated Foam Backed Fabric, Back Rest With Mesh Type Fabric, Upholstery: Heavy Duty Rubber Backed Fabric In Black 59 Counter Height Stools :Supply And Erection Of Counter Height Stools ( Bar Stools ) Of Following Specifications : Revolving Adjustable Chrome Plated Steel Body Chairs With Resistance To The Corrosion. Cushion Seat With Lift Mechanism For Adjustment Of Height. Minimum Height 750Mm Before Expansion. Medium Back Rest And Arm Rest. Item Shall Be Of Reputed Make. 60 Supplying And Fixing Of Lab Work Table With 18 Mm Thick Edge Moulded Granite Top Supported Over 18Mm Thick Marine Ply Wood Of 2500Mm,L X 1200Mm,W X 850Mm, H And Powder Coated Gi Frame Of Section Size Not Less Than 50X50X1.5 Mm Including And Providing 4 Nos Under Storage Movable Cabinents Of Size 600Mm,L X 450Mm,D X 750 Mm,H And Powder Coated Steel Sheet Of Thickness Not Less Than 1Mm With 1 Drawer And Partition Bottom Storage Space With Door Including Drawer Channels, Individual Locks And Handles All As Per The Approved Drawing And Instructions Of Engineer In Charge 61 Lab Work Bench -The Work Bench Top Made Up Of 18Mm Thick Granite Top Edge Moulded Over 18 Mm Thick Marine Plywood And Gi Powder Coated Frame Work Of Section Size Not Less Than 50X50X1.5Mm. The Width Of The Table Shall Be 750Mm And Height Shall Be 850Mm. The Frame Provided With Level Adjusting Screws Fixing Accessories ,Carriage Of Material All Complete As Per The Approved Drawings And Direction Of Engineer In Charge.Note Only Length Of The Table Shall Be Measured For Making Payment. 62 Cabinet/Wardrobe: Providing And Errection Of Cabinet/Wardrobe Unit Made With 18 Mm Thick Prelaminated Mdf Board Of One Side Decorative Lamination And Other Side Balancing Lamination Having Total Unit Dimension Of 900Mm,L X 450Mm,Dx 2400Mm,H And All Edges To Be Sealed With Pvc Edge Beeding Of 2.00 Mm Thick Including All Fittings Such As Autoclose Hinges,Chromium Plated Brass Individual Locks & Handles ,Tower Bolts Etc All Required. All Shelves To Be Fix With Proper Support And Bracket Holders At A Spacing Of 400 Mm Centre To Centre And All As Per The Drawings And Instruction Of Engineer In Charge. Board Make : Greenlam/ Merino / Century/ Equivalent . Only Front Elevation Will Be Measured. 63 Overhead Storage: - Providing And Fixing Overhead Storage Unit With Minimum 18 Mm Thick Pre-Laminated Medium Density Fiber Board Exterior Grade (Grade-I) Is: 14587:1998 Marked With One Side Decorative And Other Side Balancing Lamination. Cupboard Shutters Edge To Be Sealed With Pvc Edge Bending Tape 2.00 Mm Thick Of Approved Brand Including Isi Marked Nickel Plated Bright Finishing M.S. Piano Hinges Conforming To Is:3818 Marked With Fixing Chromium Plated Brass 50 Mm Cupboard Or Wardrobe Knobs, Special Quality Chromium Plated Brass Cupboard Locks With Six Levers Of Approved Quality Including Necessary Screws Etc. Complete. Only Front Elevation Will Be Measured. 64 Electrical- Wiring 65 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required.Group C 66 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Offrls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessedmedium Class Pvc Conduit As Required2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 67 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Offrls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessedmedium Class Pvc Conduit As Required2X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire 68 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Offrls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessedmedium Class Pvc Conduit As Required2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire 69 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required2 X 6 Sq.Mm + 1 X 6 Sq.Mm Earth Wire 70 Fixtures 71 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front Onsurface Or In Recess, Including Providing And Fixing 3 Pin 5/6 Amps Modular Socketoutlet And 5/6 Amps Modular Switch, Connection Etc. As Required. (For Light Plugs To Beused In Non Residential Buildings) 72 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front Onsurface Or In Recess, Including Providing And Fixing 6 Pin 5/6 & 15/16 Ampsmodular Socket Outlet And 15/16 Amps Modular Switch, Connection Etc. As Required 73 Supplying & Fixing Suitable Size Gl Box Wih Modular Plate And Cover In Front Onsurface Or In Recess Including Providing And Fixing 25 A Modular Socket Outlet And 25A Modular Sp Mcb, C Curve Including Connections, Painting Etc. Asrequired. 74 Supply, Installation Of Surface Mounted Led Tubelight. The Luminaire Should Have Cri 80 And Cct Of Both 6500K/5700K. The Luminaire Shall Be Compliant With Ip20 And Ik02 Classification. Luminaire Shall Be Designed To Emit At Least 3600Nominal Lumens And Efficacy Of Atleast 105 Lumen/Watt And Minimum System Wattageof 30 Watts. The Luminaire Shall Be Designed So As To Ensure Lumen Depreciation Of Upto 30% Over 25K Burning Hours. The Electronic Driver Used Shall Have A Power Factor 0.95 And Thd. Make - Philips, Crompton, Wipro, Havells 75 Supply And Installation Of Surface/Recess Mounted Led Round/Square Luminaire With Crca Housing Suitable With Fully Diffused Diffuser For General Lighting In Offic Eareas. The Luminaire Should Have Cri 80 And Cct Of Both 6500K/5700K, Cool White Light. The Luminaire Shall Be Compliant With Ip20 And Ik02 Classification.Luminaire Shall Be Designed To Emit At Least 1000 Nominal Lumens And Efficacy Ofatleast 105 Lumen/Watt And Minimum System Wattage Of 10 -15 Watts. The Luminaire Shall Be Designed So As To Ensure Lumen Depreciation Of Up To 30% Over 50K Burning Hours. The Electronic Driver Used Shall Have A Power Factor 0.95 And Thd. For Light Fittings To Be Installed In False Ceiling, All Required Cuttings Shall Be Made And Damages Shall Be Made Good As Per The Direction Of Engineer In Charge. Make-Philips, Crompton, Wipro 76 Supply, Conveyance, Installation, Testing And Commissioning Of Ceiling Fans Of The Following Sizes Using Standard Accessories Excluding Resistance Type Regulator, Wiring The Down Rod With Pvc Insulated And Pvc Sheathed 650/1100V Grade 3 Core Round Copper Conductor Flex Wire Or With Extended Original Wiring Etc. As Required. 1200Mm Sweep - 5 Star Rated, 3 Blade Ceiling Fan Complete With 300Mm Down Rod, Canopies,Shackles. 77 Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existingmodular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 78 Supplying, Conveyance And Installation Of 3 Blade, 400 Mm Sweep, 1400 Rpm Wall Mount Fan Including Frames And All Mounting Accessories Complete. Recommended Make: Usha/ Havells/ Bajaj / Almonard Or Equivalent 79 Supplying, Conveyance And Installation Of 150 Mm Sweep,1800 Rpm Exhaust Fanincluding Frames And Allmounting Accessories Complete. Recommended Make: Usha/Havells/Bajaj Or Equivalent 80 Supplying And Fixing 3 Pin, 5 Amp Ceiling Rose On The Existing Junction Box/ Wooden Block Including Connection Etc As Required. 81 Supplying And Fixing Brass Batten/ Angle Holder Including Connection Etc. As Required. 82 Supply, Installation Of 12 Watt Led Bulb. 83 Db And Switchgear 84 Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall , Making Good The Damages, Colour Washing Etc. As Required6 Way (8+18) - Double Cover Tpn Vertical Db With Provision For Fixing 4P Mcb / Isolator/ Rccb/ Rcbo As Incomer And Sp/ Tp Mcb As Outgoing (Ip 42/43) 85 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) 16 Way, Double Door 86 Supplying And Fixing 5A To 32 A Rating, 240/415 Volts, 10 Ka, \\C\\ Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole 87 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 88 Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps 89 Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existingmcb Db Complete With Connections, Testing And Commissioning Etc. As Required.63Amps 90 Supplying And Fixing Following Rating, Four Pole, (Three Phase And Neutral), 415Volts, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30Milli Amperes In The Existing Mcb Db Complete With Connections, Testing Andcommissioning Etc. As Required.63 Amps 91 Supplying And Fixing Cable End Boxes (Ip 43) Suitable For Following Single Poleand Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess,Complete With Testing And Commissioning Etc. As Required.For 6 Way, Double Door Spn Mcbdb 92 Cctv And Networking 93 Supply, Conveyance And Installing Of 2Mp Ip Dome/Bullet Camera Having 1/3Progressive Scan True Day And Night Colour Ir Camera Having Effective Pixel Of 2Mp, Video Frame Rate Of 2Mp @30Fps, Minimum Illumination Of 0.01 [email protected], 0Lux@Ir On, 20 M Ir Range, 24 Ir Led, Awb, Agc, Blc, 2D Noise Reduction,With 3.6Mm Board Lense, 12 Vdc, Poe Ip67 Rated Weatherproof Performance. 1 Year Warranty. Make: Bosch/Cp Plus/Honeywell Or Equivalent 94 Supply, Installation And Integration Of 8 Channel Embedded Linux Poe, Nvr (Network Video Recorder), Having Dual Core Embedded Processor, Must Connect 8 Channel Ip Cameras , Should Support Min 2 Sata Hdd Each Of 6Tb And Must Recordvideo Simultaneously, (Recording Type: Continuous, Motion Detection, Alarm, Smartevent, Event Motion Detection, Alarm, Smart Event), Video Compression H.265(Hevc)/H.264+/H.264, 2 Year Warranty, Image Quality Should Be Maintainedthroughout The Warranty Period. Make: Bosch/Cp Plus/Honeywell Or Equivalent 95 Supply And Installation Of Network Switch. 8 Port Poe Switch 1000Base-T Copper Ethernet Poe+ Connections, 10M/100M/1G Rj-45 Copper Ports, 1000Base-X Fiber Sfp Ports, 8 Port Auto Sensing 10/100/1000 Mbps Poe, Minimum Cpu Memory 512 Mb With 2 Sfp/Combo Ports, Energy Efficient Ethernet (Ieee 802.3Az). Make: Cisco/Cp Plus/ Netgear Or Equivalent 96 Supply And Fixing Of 6U Wall Mounting Rack With Supply And Fixing Of Mounting Brackets For Support Lockable Front Door And Detachable Side Doors, Cable Manager And Pdu Of 4 Or 6 Sockets Including Cooling Fan With Accessories Complete 97 Supply And Installation Of 8Tb Hard Disk 98 Supply And Installation Of Led Color Monitor Of Minimum 32 Inch Screen, Complete,Uhd Display Make: Lg/Samsung/Panasonic Or Equivalent. 99 Supplying And Drawn Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface/Recessed Steel/Pvc Conduit As Required1 Run Of Cable 100 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/ Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.25 Mm 101 Supplying And Fixing Rj45 Outlet Including Cover Plate, Keystone Jack And Gang Box Supporting, Connection Etc. As Required 102 Air Conditioning System 103 Supply, Installation, Testing And Commissioning Of Split Air Conditioner Of Followingcapacity And Specifications: Consisting Of High Wall-Mounted Type Room Unit (Fan Coil) With Cordless Remote Control And One Number Outdoor Condensing Unit Comprising Of Energy-Efficient Suitable Rotary Compressor For Operation On Single Phase, 230 V, 50Hz Supply, Fixing The Outdoor Unit On A Raised Platform As Per Manufacturers Recommendation And Fixing Of Room (Fan Coil) Unit On Wall, Standard 4M Distance Refrigerant Copper Piping With 13Mm Nitrile Rubber Insulation, Providing And Making Interconnection Between Room & Condenser As Per Site Conditions, Comprising Of 1Inch Dia Drain Pvc Pipe With Insulation Up To 4 M, Canvas Connections, Full Electrical Cabling From Power Plug Near Indoor Unit And To Outdoor Unit, Odu Ms Stand, First Charge Refrigerant Gas, Suitable Stabilizer Etc Complete As Required. (Make: Voltas, Blue Star, Hitachi, Carrier Or Equivalent). 2 Tr 3 Star Rated (Inverter Type Ac) As Per Bee 104 Supply, Installation, Testing And Commissioning Of Split Air Conditioner Of Following Capacity And Specifications: Consisting Of High Wall-Mounted Type Room Unit (Fan Coil) With Cordless Remote Control And One Number Outdoor Condensing Unit Comprising Of Energy-Efficient Suitable Rotary Compressor For Operation On Singlephase, 230 V, 50Hz Supply, Fixing The Outdoor Unit On A Raised Platform As Per Manufacturers Recommendation And Fixing Of Room (Fan Coil) Unit On Wall, Standard 4 M Distance Refrigerant Copper Piping With 13Mm Nitrile Rubber Insulation, Providing And Making Interconnection Between Room & Condenser As Per Site Conditions, Comprising Of 1Inch Dia Drain Pvc Pipe With Insulation Up To 4 M, Canvas Connections, Full Electrical Cabling From Power Plug Near Indoor Unit And To Outdoor Unit, Odu Ms Stand, First Charge Refrigerant Gas, Suitable Stabilizer Etc Complete As Required. (Make: Voltas, Blue Star, Hitachi, Carrier Or Equivalent). 1.5 Tr 3 Star Rated (Inverter Type Ac) As Per Bee 105 Supply And Installation Of Additional Copper Piping, Cabling From Indoor To Outdoor And Drain Piping For Air Conditioning Unit With Proper Insulation Including All Required On Wall/Above False Ceiling Complete 106 Supply, Installation, Testing And Commissioning Of True On-Line Double Conversion 6 Kva Ups System With 1:1 Crest Factor Single Phase Phase Input – Singlephase Output. Inversion Shall Be Microprocessor Controlled With Instantaneous Sine Wave Control Using Igbt. Ups Shall Have Standard Display Features, Alarms, Safeties, Etc Input Voltage Range : A) Phase & Single Phase With Ground B)Votage Range 190 Vac & 250 Vac C)Input Frequency : 50/60 Hz D)Power Factor : 0.95 Or Above E)Thd : Less Than 5% With Full Load Bypass F) Voltage Range & 200Vac & 240 Vac G) Frequency Range – 45-55 Hz/55-65 Hz Output Voltage Range H)Voltage Range & 200Vac & 240 Vac I)Frequency Range & 50/60 Hz J)Voltage Distortion & Linear Load = 2% K)Voltage Distortion – Nonlinear Load = 5% L)Output Waveform – Pure Sinewave M) Minimum Back Up Time : Continuous 60 Minutes At Full Load Rectifier Shall Be Full Wave Type (Shall Fully Meet The Specified Input Power Requirements) Battery Type: Sealed Lead Acid Maintenance Free Dc Voltage : 24/48/96V Dc System, Battery Nos And Capacity Shall Be Designed For Optimum Storage Space. Make: Liebert Vertiv/Apc By Schneider/Numeric By Legrand 107 Visi Cooler And Refrigerator 108 Supply And Installation Of 260 Litre Refrigerator, Direct-Cool Model With A Minimum 3-Star Bee Rating And Stabilizer-Free Operation. It Shall Use Eco-Friendly Refrigerant (R600A) And Have A High-Efficiency, Low-Noise Compressor. The Unit Shall Include Toughened Glass Shelves, A Vegetable Crisper, Bottle Storage For 2L Bottles, An Internal Freezer Compartment, And A Removable Anti-Bacterial Gasket. It Shall Operate On 230V, 50Hz Ac And Include Standard Accessories Such As An Ice Tray And Egg Tray. The Refrigerator Shall Have 1-Year Comprehensive Warranty And 10-Year Compressor Warranty, With Bis Certification.
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 3
45.
Tourism #11320518 Technical Bid
Tender For Tourism Development Work Of Shri Ramjanaki Temple, Kotawari In Shahjahanpur District.-1 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge. All Kinds Of Soil Dsr-2.6.1 170.25 Cum 133.12 127.80 21757.52 In All Kind Of Soil Upto 1.5M To 3.0M. Depth 2.6.1+2.26.1 18.74 Cum 228.22 219.09 4106.24 In All Kind Of Soil Upto 3.0M To 4.5M. Depth 2.6.1+(2.26.1* 2) 6.37 Cum 323.31 310.38 1977.88 2 Excavation Of Foundation In Ordinary Soil (Loam Clay Or Sand) Including Lift Upto 1.50 Meter And Lead Upto 30 Meter And Including Filling, Watering And Ramming Of Excavated Earth Into The Trenches Or Into The Space Between The Building And Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Sur-Plus Earth As Directed By The Engineer Incharge Up To A Distance Of 30 Meters From The Foundation Trenches. Dsr-2.1.1 35.61 Cum 97.38 93.49 3329.14 3 Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 And For All Lift. Dsr-2.25 8.70 Cum 147.00 141.12 1227.84 4 Excavating, Supplying And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete Dsr-2.25(A) 55.60 Cum 525.36 504.34 28041.40 5 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) Dsr-4.1.8 70.78 Cum 5108.83 4904.47 347162.56 6 Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. Dsr-2.27 26.31 Cum 1592.76 1529.05 40229.27 7 Diluting And Injecting Chemical Emulsion For Postonstructional Anti-Termite Treatment (Excluding The Cost Of Chemical Emulsion) : Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 20% With 1% Concentration Dsr-2.35.3.1 194.47 Sqm 232.53 223.23 43411.24 8 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). Dsr-5.3 82.66 Cum 8628.83 8283.68 684729.10 9 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size De Rived From Natural Sources) Footing Dsr-5.1.2 21.98 Cum 6784.08 6512.72 143149.60 10 Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Dsr-5.2.2 22.97 Cum 8139.44 7813.86 179484.39 Abstract Of Cost Delhi Schedule Of Rate Effective From 12/07/2023 X (0.735X106/107X1.03) Has Been Followed. Proposed Tourism Development Of Ramjanki Temple At Kotawari, Tilhar, Sahjahanpur, U.P. 11 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers Dsr-5.9.5 257.49 Sqm 552.28 530.19 136518.66 12 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Suspended Floors, Roofs, Landings, Balconies And Access Platform Dsr-5.9.3 407.10 Sqm 695.41 667.60 271778.96 13 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete Dsr-5.9.1 63.96 Sqm 294.10 282.34 18058.37 14 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Columns, Pillars, Piers, Abutments, Posts And Struts Dsr-5.9.6 208.86 Sqm 720.95 692.11 144554.66 15 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Dsr-6.1.1 16.84 Cum 5527.80 5306.69 89341.45 16 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Dsr-6.1.2 51.30 Cum 5349.01 5135.05 263427.92 17 Providing And Laying Damp-Proof Course 50Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 20Mm Nominal Size Derived From Natural Sources). Dsr-4.11 2.14 Sqm 371.80 356.93 763.83 18 Providing & Applying A Coat Of Residual Petroleum Bitumen Of Grade Of Vg-10 Of Approved Quality Using 1.7Kg Per Square Metre On Damp Proof Course After Cleaning The Surface With Brushes And Finally With A Piece Of Cloth Lightly Soaked In Kerosene Oil. Dsr-4.13 44.55 Sqm 109.61 105.22 4687.75 19 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Dsr-6.4.2 80.04 Cum 6829.23 6556.06 524747.32 20 Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) Dsr-6.13.2 60.18 Sqm 842.82 809.11 48692.17 21 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More Dsr-5.22A.6 186.64 Qtl 8088.48 7764.94 1449250.34 22 15 Mm Cement Plaster On Plinth Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Coarse Sand) Dsr-13.5.1 65.74 Sqm 308.80 296.45 19488.62 23 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix: 1:6 (1 Cement: 6 Coarse Sand) Dsr-13.5.2 252.10 Sqm 296.50 284.64 71758.35 24 12 Mm Cement Plaster Of Mix : 1:6 (1 Cement: 6 Coarse Sand) Dsr-13.4.2 609.85 Sqm 257.73 247.42 150888.63 25 Add For Plaster Drip Course/ Groove In Plastered Surface Or Moulding To R.C.C. Projections. Dsr-5.30 315.01 Rm 58.80 56.45 17781.09 26 Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Finished With A Floating Coat Of Neat Cement, Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate Dsr-11.3.1 29.40 Sqm 460.63 442.21 13000.95 27 Cement Plaster Skirting Up To 30 Cm Height, With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Finished With A Floating Coat Of Neat Cement.18 Mm Thick Dsr-11.6.1 3.35 Sqm 496.52 476.66 1596.81 26 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm Dsr-11.41.2 137.75 Sqm 1165.05 1118.45 154065.99 27 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To |.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm Dsr-11.46.2 10.17 Sqm 1217.25 1168.56 11884.22 28 Providing And Fixing 1St Quality Ceramic Glazed Floor Tiles Conforming To Is : 15622 (Thickness To Be Specified By The Manufacturer ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Dsr-11.37A 148.53 Sqm 812.00 779.52 115781.77 29 Providing And Laying Rectified Glazed Ceramic Floor Tiles Of Size 300X300 Mm Or More (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In Colours White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Dsr-11.39 4.40 Sqm 997.47 957.57 4213.30 30 Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Ordinary Cement Without Any Pigment 11.20.4 6.12 Sqm 792.24 760.55 4654.54 31 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors,Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note: Butt Hinges And Necessary Screws Shall Be Paid Separately) 35 Mm Thick Dsr-9.5.1.1 6.30 Sqm 3083.86 2960.50 18651.18 32 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors,Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note: Butt Hinges And Necessary Screws Shall Be Paid Separately) 30 Mm Thick Dsr-9.5.1.2 83.22 Sqm 2810.38 2697.97 224524.67 33 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws Dsr-9.21.1 15.33 Sqm 1794.43 1722.65 26408.23 34 Providing 40X5 Mm Flat Iron Hold Fast 40 Cm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 30X10X15Cm 1:3:6 Mix (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size). Dsr-9.53 128.00 Nos 171.63 164.77 21090.11 35 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding Dsr-9.48.1 937.05 Kg 164.32 157.75 147816.54 36 Providing And Fixing T-Iron Frames For Doors, Windows And Ventilators Of Mild Steel Tee-Sections, Joints Mitred And Welded, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10X10 Cm Of C.C. 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size). Dsr-10.13.1 100.80 Kg 106.27 102.02 10283.67 37 Providing And Fixing Angle Iron Frames For Doors, Windows And Ventilators Of Mild Steel Angle Sections Of Size 35X35X5 Mm, Joints Mitred And Welded By Angle Iron 35X35X5 Mm Or 35X 5 Mm Flat Pieces To The Existing T-Iron Frame Or To The Wall With Dash Fastener, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer, All Complete As Per The Direction Of Engineer-In-Charge. Dsr-10.31 125.00 Kg 97.87 93.96 11744.60 38 Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-Incharge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). Dsr 10.28 133.33 Kg 579.28 556.11 74146.05 39 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately).(Sal Wood) Dsr-9.1.2 1.61 Cum 87387.28 83891.79 135065.79 40 Fixing Of Door, Windows/Ventilators Chaukhats In Position. (A) Door Chaukhats Above 1.5 Sqm To 5.0Sqm Mr 19.00 Nos 150.00 144.00 2736.00 (B) Window Chaukhats Above 1.5 Sqm 12.00 Nos 100.00 96.00 1152.00 (C) Ventilator Chaukhats 7.00 Nos 50.00 48.00 336.00 41 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade: New Work (Two Or More Coats Applied @ 1.43 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) Dsr-13.47.1 407.00 Sqm 128.32 123.19 50137.46 42 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Dsr-13.41.1 434.15 Sqm 139.23 133.66 58030.01 43 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. Dsr-13.80 841.15 Sqm 117.03 112.35 94505.07 44 Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete :250X16 Mm Dsr-9.62.2 11.00 Nos 145.27 139.46 1534.05 45 Providing And Fixing Isi Marked Oxidised M.S. Tower Bolt Black Finish, (Barrel Type) With Necessary Screws Etc. Complete : 250X10 Mm Dsr-9.63.1 21.00 Nos 62.92 60.41 1268.53 200X10 Mm Dsr-9.63.2 65.00 Nos 52.05 49.97 3247.81 46 Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete :100 Mm Dsr-9.66.2 54.00 Nos 24.41 23.44 1265.50 47 Providing And Fixing Bright Finished Brass Hanging Type Floor Door Stopper With Necessary Screws, Etc. Complete Dsr-9.82 1.00 Nos 91.23 87.59 87.59 48 Providing And Laying Integral Cement Based Water Proofing Treatment Including Preparation Of Surface As Required For Treatment Of Roofs, Balconies, Terraces Etc Consisting Of Following Operations: (A) Applying A Slurry Coat Of Neat Cement Using 2.75 Kg/Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is. 2645 And Approved By Engineer-In-Charge Over The Rcc Slab Including Adjoining Walls Upto 300 Mm Height Including Cleaning The Surface Before Treatment. (B) Laying Brick Bats With Mortar Using Broken Bricks/Brick Bats 25 Mm To 115 Mm Size With 50% Of Cement Mortar 1:5 (1 Cement : 5 Coarse Sand) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineerin- Charge Over 20 Mm Thick Layer Of Cement Mortar Of Mix 1:5 (1 Cement :5 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineerin- Charge To Required Slope And Treating Similarly The Adjoining Walls Upto 300 Mm Height Including Rounding Of Junctions Of Walls And Slabs. (C) After Two Days Of Proper Curing Applying A Second Coat Of Cement Slurry Using 2.75 Kg/ Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge. (D) Finishing The Surface With 20 Mm Thick Jointless Cement Mortar Of Mix 1:4 (1 Cement :4 Coarse Sand) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge Including Laying Glass Fibre Cloth Of Approved Quality In Top Layer Of Plaster And Finally Finishing The Surface With Trowel With Neat Cement Slurry And Making Pattern Of 300X300 Mm Square 3 Mm Deep. (E) The Whole Terrace So Finished Shall Be Flooded With Water For A Minimum Period Of Two Weeks For Curing And For Final Test.“All Above Operations To Be Done In Order And As Directed And Specified By The Engineer-In-Charge : With Average Thickness Of 120 Mm And Minimum Thickness At Khurra As 65 Mm Dsr-22.7.1 198.55 Sqm 1263.41 1212.87 240815.58 49 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture Dsr-13.48.3 144.65 Sqm 128.02 122.90 17777.47 50 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture Dsr-13.48.2 209.70 Sqm 132.18 126.90 26610.03 51 Providing & Fixing Panes Of Glass With Equal Or Equivalent I.S.I Marked Quality Putty. Brads And Springs And Including Supply Of All Materials And Labour Etc Complete . 3.8 To 4.7 Mm Thick Dsr-10.30.1 44.76 Sqm 805.96 773.72 34631.80 52 Supply And Fixing Of Drop Down Rail / Grab Bars Mr 4.00 Nos. 4400.00 4224.00 16896.00 53 Providing, Driving With Hydraulic Piling Rigs With Power Units And Installing Driven Cast-In-Situ Reinforced Cement Concrete Piles Of Grade M-25 Of Specified Diameter And Length Below The Pile Cap, To Carry Safe Working Load Not Less Than Specified, Excluding The Cost Of Steel Reinforcement But Including The Cost Of Shoe And The Length Of Pile To Be Embedded In The Pile Cap Etc. All Complete. (Length Of Pile For Payment Shall Be Measured From Top Of Shoe To The Bottom Of Pile Cap) : 400 Mm Dia Piles Dsr-20.1.1 48.00 Rm 2075.18 1992.17 95624.30 54 Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) : 30 Mm Thick Dsr-8.14.1.5 50.74 Sqm 3971.79 3812.92 193478.98 55 Stone Work In Plain Ashlar In Super Structure Upto Floor Five Level In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Including Pointing With Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade Both Face Dressed Red Sand Stone Dsr-7.12.1.1 3.56 Cum 51218.78 49170.03 175241.97 56 Extra For Stone Work Ashlar Sunk Or Moulded Or Sunk And Moulded Or Carved In : Triangular Or Square Or Rectangular Pillars Dsr-7.21.1 3.56 Cum 2834.15 2720.79 9696.89 57 Providing And Fixing Stainless Steel Cramps Of Required Size And Shape For Anchoring Stone Wall Lining To The Backing Or Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 (1 Cement : 2 Coarse Sand), Including Making The Necessary Chases In Stone And Holes In Walls Wherever Required. Dsr-8.15 99.58 Kg. 535.78 514.35 51219.04 58 Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) :Red Sand Stone - Exposed Face Machine Cut And Table Rubbed With Rough Backing. 50Mm Dsr 8.14.1.3 37.80 Sqm. 4342.28 4168.59 157572.62 59 Providing And Fixing Copper Pins 7.5 Cm Long 6 Mm Diameter For Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 (1 Cement : 2 Coarse Sand), Including Making The Necessary Chases. Dsr 8.16 30.00 Nos. 32.92 31.61 948.21 60 Providing And Fixing Stone Jali 40 Mm Thick Throughout In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment, Matching The Stone Shade, Jali Slab Without Any Chamfers Etc. Red Sand Stone Dsr 7.33.1 4.50 Sqm. 11198.29 10750.35 48376.59 61 Stone Work, Plain In Copings, Cornices, String Courses And Plinth Courses, Upto 75 Mm Thick In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand), Including Pointing With White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade.: Red Sand Stone Dsr 7.32.1 0.47 Cum. 70303.46 67491.32 31720.92 62 Carving & Engraving Work On Red Sand Stone (Labour Only) M.R. 9.73 Sqm. 15615.00 14990.40 145856.59 63 Manufacturing, Supplying And Fixing Retro Reflective Overhead Signage Boards Made Up Of 2 Mm Thick Aluminium Sheet, Face To Be Fully Covered With High Intensity And Encapsulated Lens Type Heat Activated Retro Reflective Sheeting Conforming To Type - Iii Of Astm-D-4956-01 As Approved By Engineer-In-Charge, Letters, Borders Etc. As Per Irc : 67-2001 In Silver White With Blue Colour Back Ground And With High Intensity Grade, Pasted On Substrate By Pressure Sensitive Adhesive Backing Which Shall Be Activated By Applying Pressure Conforming To Class Ii Of Astm-D-4956-01 And Fixing The Same To The Plate Of Structural Frame Work By Means Of Suitable Sized Aluminium Alloys, Rivets Or Bolts & Nuts @ 300 Mm Centre To Centre All Along The Periphery As Well As In Two Vertical Rows Along With Theft Resistant Measures, Including The Cost Of Painting With Two Or More Coats Of Epoxy Paint In Grey Colour On The Back Side Of Aluminium Sheet Including Appropriate Priming Coat. The Rate Includes The Cost Of Rounding Off The Corners, Lowering Down The Structural Frame Work From The Gantry, Fixing And Erecting The Same In Position All Complete As Per Drawings, Specification And Direction Of The Engineerincharge.( Structural Frame Work Including M.S. Plate To Be Provided Separately. Rectangular Area Of The Sheet Only Shall Be Measured For Payment). Overhead Informatory Road Signage Dsr 16.60.1 8.64 Sqm. 4409.78 4233.39 36576.45 64 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Dsr 8.2.2.2 34.45 Sqm 3852.10 3698.01 127396.50 65 Making Plinth Protection 50 Mm Thick Of Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Over 75 Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation, Levelling & Dressing & Finishing The Top Smooth. Dsr-4.17 6.00 Sqm 561.96 539.48 3236.87 66 Providing And Laying Factory Made Chamfered Edge Cement Concrete Paver Blocks In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc, Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over 50 Mm Thick Compacted Bed Of Sand, Compacting And Proper Embedding/Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand. Complete All As Per Direction Of Engineer-In-Charge.80 Mm Thick C.C. Paver Block Of M-35 Grade With Approved Colour Design And Pattern Dsr-16.91.2 207.07 Sqm 818.60 785.85 162723.31 1 Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fitting And Fixtures Completed Including Cutting And Making Good The Walls And Floors Wherever Required.White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests 17.1.1 2.00 Nos. 5075.38 4872.36 9744.73 2 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Isi Marked White Solid Plastic Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete Including Cutting And Making Good The Walls And Floors Wherever Required. W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 17.2.1 3.00 Nos. 4886.50 4691.04 14073.11 3 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require A) White Vitreous China Flat Back Wash Basin Size 550X 400 Mm With Single 15 Mm C.P. Brass Pillar Tap. 17.7.4 4.00 Nos. 1409.35 1352.98 5411.91 4 Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430X260X350 Mm And 340X410X265 Mm Sizes Respectively With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.I Clamps Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required A) One Urinal Basin With 5 Litre White P.V.C. Automatic Flushing Cistern 17.4.1 3.00 Nos. 4918.90 4722.14 14166.42 5 Providing And Fixing Flexible P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc Waste Fittings Complete. Flexible Pipe 17.28.2 A) 32Mm Dia 17.28.2.1 4.00 Nos. 89.66 86.07 344.29 B) 40Mm Dia 17.28.2.2 2.00 Nos. 89.66 86.07 172.15 6 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 17.31 4.00 No. 1205.92 1157.69 4630.74 7 Providing And Fixing Cp Brass Single Lever Lelephonic Wall Mixture Of Quality & Make And As Per Thedirection Of Enginer-Incharge. A) 15Mm Dia Nominal Dia. 17.22B 2.00 Each 5205.39 4997.17 9994.34 8 Providing And Fixing 8 Mm Dia C.P./S.S. Jet With Flexible Tube Upto 1 Meter Long With S.S. Triangular Plate For Eureopean Type W.C. Of Quality And Make As Approved By Engineer-In-Charge. 15Mm Nominal Bore 17.16A 2.00 Each 261.85 251.38 502.76 Sanitary Fixtures & Accessories : I 9 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fittings Arrangement Of Approved Quality And Colour. 600 Mm Long Towel Rail With Total Length Of 645 Mm, Width 78 Mm And Effective Height Of 88 Mm, Weighing Not Less Than 190 Gms. Dsr-17.73.2 1.00 Each 531.69 510.43 510.43 10 Providing And Fixing Ptmt Soap Dish Holder Having Length Of 138Mm, Breadth 102Mm, Height Of 75Mm With Concealed Fitting Arrangements, Weighing Not Less Than 106 Gms. Dsr-18.65 1.00 Each 83.58 80.24 80.24 11 Providing And Fixing C.P. Brass Ablution Health Faucet Assembly With 1.0 M Long Braided Pvc Hose With Mounting Bracket Fixed On Wall Complete.[For Ewc]-Make-Jaquar Ald565 Mr 2.00 Each 1705.00 1636.80 3273.60 12 Providing And Fixing C.P. Brass Two-Way Angle Valve For Ewc Points & For Fixing Ablution Health Faucet Of Approved Quality Conforming To Is:8931. 15 Mm Nominal Bore-Essco Sqt 526A Mr 2.00 Each 1335.00 1281.60 2563.20 1 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A Including Jointing With Seal Ring Conforming To Is : 5382 Leaving 10 Mm Gap For Thermal Expansion . (I) Single Socketed Pipes. A) 110Mm Diameter 12.41.2 31.30 Mtr 283.04 271.72 8504.80 2 Making Khurras 45X45 Cm With Average Minimum Thickness Of 5 Cm Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate Of 20 Mm Nominal Size) Over Pvc Sheet 1M X 1 M X 400 Micron, Finished With 12 Mm Cement Plaster 1:3 (1 Cement : 3 Coarse Sand) And A Coat Of Neat Cement,Punning,Rounding The Edges And Making And Finishing The Outlet Complete. A) 110Mm 12.22 7.00 Nos. 223.68 214.73 1503.13 3 Providing And Fixing Unplasticised -Pvc Pipe Clips Of Approved Design To Unplasticised - Pvc Rain Water Pipes By Means Of 50X50X50Mm Hard Wood Plugs, Screwed With M.S. Screws Of Required Length Including Cutting Brick Work And Fixing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) And Making Good The Wall Etc. Complete. A) 110Mm 12.43.2 20.00 Nos. 278.47 267.33 5346.54 4 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I)Single Socketed Pipes. 110 Mm Diameter 12.41.2 Rm. 283.04 271.72 5 Providing And Fixing To The Inlet Mouth Of Rain Water Pipe Cast Iron Grating 15 Cm Diameter And Weighing Not Less Than 440 Grams. Dsr-12.44 8.00 Nos. 41.02 39.38 315.06 6 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. A) 110Mm Dia P.V.C. Pipe Nsr 20.00 Rm. 485.00 465.60 9312.00 B) 90Mm Dia P.V.C. Pipe Nsr 25.00 Rm. 390.00 374.40 9360.00 6 Providing & Fixing Upvc Floor Trap Of Self Cleansing Design With Cp Jali Complete In All Respects. (Make : Supreme / Finolex / Prince) P-Trap Type Floor Trap 110 X 90 Mm Nsr 12.00 No. 195.00 187.20 2246.40 7 Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings/Accessories For Unplasticised Rigid Pvc Pipes Including Jointing With Seal Ring Leaving 10 Mm Gap For Thermal Expansion.. (Make : Supreme / Finolex / Prince) Door Tee 110X110X110 Mm Nsr 2.00 No. 280.00 268.80 537.60 110X110X90 Mm Nsr 2.00 No. 200.00 192.00 384.00 Bend 110 Mm Nsr 2.00 No. 170.00 163.20 326.40 Soil Waste & Vent Pipes And Fittings - Ii 90 Mm Nsr 2.00 No. 160.00 153.60 307.20 1 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge.Lls Etc. (Internal Work) I) Exposed On Wall A) 32Mm Nominal Dia Pipe 18.9.4 30.00 Rm. 328.94 315.78 9473.44 3 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings Including Fixing The Pipe With Clamps At 1.00M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Internal Work) I) Exposed On Wall A) 25Mm Dia Nominal Outer Dia Pipes 18.7.3 20.00 Rm. 301.15 289.11 5782.13 4 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testiang Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work Including Cutting Chases And Making Good The Walls Etc. A) 15Mm Dia Nominal Outer Dia Pipes 18.8.1 70.00 Rm. 373.34 358.40 25088.28 B) 20Mm Dia Nominal Outer Dia Pipes 18.8.2 20.00 Rm. 403.19 387.06 7741.18 C) 25Mm Dia Nominal Outer Dia Pipes 18.8.3 Rm. 470.42 451.60 5 Providing & Fixing G.I. Pipes Complete With G.I. Fittings & Clamps Including Cutting & Making Good The Walls Etc. (Internal Work) I) Exposed On Wall A) 25Mm Dia Nominal Bore (Medium Duty) Dsr-18.10.3 20.00 Rm. 413.76 397.21 7944.21 Ii) Concealed Pipe Including Painting With Anticorrosive Bitumatic Paint, Cutting Chases And Making Good The Wall. A) 15Mm Dia Nominal Bore Dsr-18.11.1 15.00 Rm. 435.32 417.91 6268.65 2 Painting G.I. Pipes And Fittings With Synthetic Enamel White Paint Over A Ready Mixed Priming Coat, Both Of Approved Quality For New Work. A) 15Mm Dia Nominal Bore. Dsr-18.38.1 15.00 Rm. 14.55 13.97 209.51 B) 25Mm Dia Nominal Bore. Dsr-18.38.3 10.00 Rm. 22.69 21.78 217.79 2 Providing And Fixing 45 Cm Long Unplasticised Pvc Connection Pipe With Brass Unions. A) 15Mm Nominal Bore Dsr18.21.2.1 4.00 Nos. 73.31 70.38 281.51 5 Providing & Fixing Cp Brass Bib Cock Of Approved Quality Conforming To Is 8931 A) 15Mm Nominal Bore 18.49.1 7.00 Nos. 380.09 364.88 2554.19 6 Providing & Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms. A) 15Mm Nominal Bore 18.51.1 7.00 Nos. 599.19 575.22 4026.57 7 Providing & Fixing C.P. Brass Angle Valve For Basin Mixer And Gyser Points Of Approved Quality Conforming To Is 8931 A) 15Mm Nominal Bore 18.53.1 14.00 Nos. 430.71 413.48 5788.75 8 Providing And Fixing Gun Metal Gate Valve With Wheel Of Approved Quality. A) 25Mm Dia Nominal Bore 18.17.1 2.00 Each 466.78 448.11 896.23 B) 32Mm Dia Nominal Bore 18.17.2 1.00 Each 517.18 496.50 496.50 C) 50Mm Dia Nominal Bore 18.17.4 Each 769.96 739.16 Water Supply Pipes And Fittings - Iii 9 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete 20Mm Dia Nominal Bore 18.18.2 1.00 Each 346.86 332.99 332.99 A) 25 Mm Nominal Bore 18.18.3 2.00 Nos. 348.03 334.10 668.21 10 Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Of Approved Brand And Manufacture With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. 18.48 A) Circular Tank 18.48 2500.00 Ltrs 8.25 7.92 19799.33 11 Providing And Fixing Stone Slab Table Rubbed, Edges Rounded And Polished Of Size 75X50Cm Deep And 1.8Cm Thick Fixed In Urinal Partitions By Cutting A Chase Of Appropriate Width With Chase Cutter And Embedding The Stone In The Chase With Epoxy Grout Or With Cement Concrete 1:2:4 (1Cement: 2Coarse Sand: 4Graded Stone Aggregate 6Mm Nominal Size) As Per Direction Of Engineerin-Charge And Finished Smooth. 8.10 Granite Stone Of Approved Shade Dsr-8.10.2 1.08 Sqm. 3038.79 2917.23 3150.61 1 Providing & Fixing Soil, Waste And Vent Pipes. A) 100Mm Dia Centrifugally Cast Iron S & S Pipe. Dsr17.35.1.2 6.00 Rm. 885.53 850.11 5100.67 2 Providing Lead Caulked Joints To Sand Cast Iron/Centrifugally Cast (Spun) Iron Pipes & Fitting Of Diameters. A) 100Mm Dsr-17.58.1 2.00 Each 466.86 448.18 896.37 3 Providing & Fixing M.S. Holder Bat Clamps Of Approved Design To Sand Cast Iron/Centrifugally Cast (Spun) Iron S & S Pipe Embeded In & Including Cement Concrete Blocks 10X10X10Cm. Of 1:2:4 Mix (1 Cement : 2 Coarse : 4 Graded Stone Aggregate 20Mm Nominal Size). Including Cost Of Cutting Holes & Making Good The Walls Etc. A) For 100Mm Dia Pipe. Dsr-17.37.1 2.00 Each 272.13 261.24 522.49 4 Providing & Fixing Cast Iron Trap Of Self Cleansing Design With Or Without Ventarm Complete, Including Cost Of Cutting & Making Good The Walls & Floors. A) 100Mm Inlet & 75Mm Outlet. Dsr17.60.2.1 1.00 No. 1481.31 1422.06 1422.06 5 Providing & Fixing Cast Iron Coller. A) 100Mm Dia. Dsr17.57.1.2 2.00 No. 384.85 369.46 738.91 6 Providing And Fixing Plain Cast Iron S & S Sanitary Bend. A) 100Mm Dsr17.39.1.2 2.00 Nos. 427.52 410.42 820.84 1 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. A) 110Mm Dia P.V.C. Pipe Mr 7.50 M 485.00 465.60 3492.00 2 Providing And Fixing Square Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber With F.P.S. Bricks Of Class Designation 75 And Water Tight C.I. Cover With Frame Of 300 X 300Mm. Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design. A) 150 X 100 Mm. Size P Type With Sewer Bricks Conforming To Is : 4885 Dsr-19.4.2.1 1.00 Nos 2050.58 1968.56 1968.56 Soil Waste & Vent Pipes And Fittings - Ii Schedule Of Quantities For Internal Sewerage System - Iv 3 Constructing Brick Masonry Manhole In Cement Mortar 1:4 (1 Cement :4 Coarse Sand) Rcc Top Slab With 1:2:4 Mix (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1:4:8 Mix (1 Cement :4 Coarse Sand :8 Graded Stone Aggregate 40Mm Nominal Size) Inside Plastering 12Mm Thick With Cement Mortar 1:3 (1 Cement :3 Coarse Sand) Finished With Floating Coat Fo Neat Cement And Making Channels In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20Mm Nminal Size) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design 19.7 Inside Size 90X80Cms And 45Cms Deep Including Ci Cover With Frame (Light Duty) 455X610Mm Internal Diamensions Total Weight Of Cover And Frame To Be Not Less Than 38 Kg (Weight Of Cover 23 Kg And Weight Of Frame 15Kg). 19.7.1 With Fps Bricks Of Class Designation 150 Dsr-19.7.1.1 1.00 Each 9577.59 9194.49 9194.49 External Sewerage Works 1 Excavating Trenches In All Kind Of Soil Of Required Width For Pipes. Including Excavation For Sockets And Dressing Of Sides, Ramming Of Bottoms, Including Getting Out The Excavated Soil & Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth Including Consolidating Each Deposited Layer By Ramming, Watering, Etc & Disposing Of Surplus Excavated Soil As Directed Within A Lead Of 50M. Up To 1.50 M Depth Pipes 80 Mm To 300 Mm Diameter 2.10.1.2 20.00 Rm 264.10 253.54 5070.79 2 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. 160Mm Dia Under Floor (For External Sewer) Nsr 20.00 Metre 1190.00 1142.40 22848.00 3 Constructing Brick Masonry Manhole With F.P.S. Bricks In Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) Rcc Top Slab With 1 : 2 : 4 Mix (1 Cement : 2 Coarse Sand : 4 Grade Stone Aggregate 20Mm Nominal Size); Foundation Concrete 1:4:8 Mix (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size) Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1Cement 3 Coarse Sand) Finished With A Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1:2:4 (1Cement : 2 Coarse Sand: 4 Graded Stone Aggregate 20 Mm Nominal Size) Finishd With A Floating Coat Of Neat Cement Complete As Per Standard Design Inside Size 90 X 80 Cm & 45 Cm Deep Including Ci Cover With Frame (Light Duty) 455 X 610 Mm Internal Dimension Total Wt. Of Cover & Frame To Be Not Less Than 38 Kg (Wt. Of Cover 23 Kg And Wt. Of Frame 15 Kg) 19.7.1.1 3.00 Nos 9577.59 9194.49 27583.46 4 Extra For Depth For Manhole With F.P.S. Bricks Size 90 X 80 Cm 19.8.1.1 0.30 Rm 6618.83 6354.07 1906.22 5 Providing M.S. Foot Rests Including Fixing In Manholes With 20*20*10 Cm Cement Concrete Blocks 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) As Per Standard Design : With 20 X 20 Mm Square Bar 19.15.1 3.00 Nos 408.51 392.17 1176.51 6 Providing And Fixing Square Mouth S.W. Gully Trap Grade `A Complete With C.I. Grating Brick Masonry Chamber With F.P.S Bricks And Water Tight Ci Cover With Frame Of 300 X 300 Mm Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design 180 X 150 Mm. Size P Type 19.4.3.1 2.00 Nos 2101.54 2017.48 4034.96 7 Making Soak Pit 2.5 M Diameter 3.0 Metre Deep With 45 X 45 Cm Dry Brick Honey Comb Shaft With Bricks And S.W. Drain Pipe 100 Mm Diameter, 1.8 M Long Complete As Per Standard Design. With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 19.32.1 1.00 Nos 20145.75 19339.92 19339.92 8 Providing M.S. Foot Rests Including Fixing In Manholes With 20X20X10 Cm Cement Concrete Blocks 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) As Per Standard Design With 20X20 Mm Square Bar Dsr-19.15.1 8.00 Nos. 408.51 392.17 3137.37 9 Providing And Fixing S.C.I. Tee 150 Mm At The Inlet And Outlet Of Septic Tank. Dsr-7087 2.00 Nos. 621.00 596.16 1192.32 10 Providing And Fixing Soil, Waste And Vent Pipes:75 Mm Diameter Sand Cast Iron S&S Pipe As Per Is: 1729 Dsr17.35.2.1 3.00 Rmt. 783.54 752.19 2256.58 11 Providing & Fixing Of 75Mm Dia Sand Cast Iron S&S As Per Is - 1729 Terminal Guard. Dsr17.56.2.1 2.00 Nos. 255.52 245.30 490.59 12 Providing & Fixing 75Mm Plane Sand Cast Iron S&S Bend Of Required Drgtee. Dsr17.39.2.1 2.00 Nos. 282.18 270.89 541.78 13 Providing Lead Caulked Joints To Sand Cast Iron/ Cetrifugally Cast (Squn) Irons Pipes & Fitting Of 50 Mm Dia Dsr-17.58.2 2.00 Nos. 394.67 378.89 757.77 14 Providing And Fixing In Position Precast Rcc Manhole Cover And Frame Of Required Shape And Approved Quality.M.D. -10- Circular Shape 500Mm Internal Diameter Dsr19.19.2.2 2.00 Nos. 879.42 844.24 1688.49 1 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable Etc. As Required Dsr 1.10.3 51.00 Each 1115.37 1070.76 54608.68 2 Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable Etc. As Required Dsr 1.11 4.00 Each 1187.60 1140.10 4560.39 3 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. Dsr 1.21.1 17.00 Metre 97.32 93.43 1588.26 4 Wiring For Circuit/ Submain Wiring Along With Earth Wire With The Following Sizes Of Frls/Hffr Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire Dsr 1.14.1 650.00 Metre 177.15 170.07 110542.86 5 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire Dsr 1.14.2 188.00 Metre 285.12 273.71 51457.72 6 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire Dsr 1.14.3 202.00 Metre 253.94 243.79 49244.67 7 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 6 Sq. Mm + 1 X 6 Sq. Mm Earth Wire Dsr 1.14.4 105.00 Metre 333.78 320.42 33644.59 8 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 6 Pin 5/6 & 15/16 A Modular Socket Outlet And 15/16 A Modular Switch, Connections Etc. As Required Dsr 1.32 22.00 Each 445.54 427.72 9409.83 9 Supplying And Fixing Brass Batten/ Angle Holder Including Connection Etc. As Required Dsr 1.34 15.00 Each 99.60 95.62 1434.25 Electrical Works 10 Installation ,Testing, Commissioning Of Wall Bracket /Ceiling Fittings Of All Sizes And Shapes Containing Upto Two Ls/Cfl/Led Lamps Per Fitting, Complete With All Accessories Including Connections Etc. As Required. Dsr 1.35 1.00 Each 90.48 86.86 86.86 11 Supplying, Installation, Testing & Commissioning Of Led Recessed/ Surface Down Lighter (Round/ Square/ Rectangular) Smd Type Of Following Body Material With Pmma And Prismatic Diffuser And Construction As Per Is : 10322 With Driver As Per The Requirement With Driver Efficiency >85%, Operating Voltage Ac 140-270 Volt, Frequency 50/60 Hz, Operating Temp Range -50C To 400C, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection ,Thd < 10% , P. F.≥0.95, Ip20, Cri >80, Ugr (Unified Glare Rating) < 19, Flicker Free (Flicker Should Be Below 5%), Life Time (Led, Driver & Electrical Circuitry), Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends, Cct 3000°K /4000°K / 5700°K / 6500°K (As Per Ansi Bin), Sdcm (Standard Deviation Colour Matching) <3, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Confirming To Relevant Bis Standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing Complete In All Respect I/C External Connections With 1.5 Sq.Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy ≥105 And <120 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C) Powder Coated Die Cast /Extruded Aluminium Body Including Trim 18 Watt Mr 19.00 Each 700.00 672.00 12768.00 12 Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required Dsr-5.4 3.00 Each 5681.03 5453.79 16361.37 13 Supplying And Laying 25 Mm X 5 Mm G.I Strip At 0.50 Metre Below Ground As Strip Earth Electrode, Including Connection/ Terminating With G.I. Nut, Bolt, Spring, Washer Etc. As Required. (Jointing Shall Be Done By Overlapping And With 2 Sets Of G.I. Nut Bolt & Spring Washer Spaced At 50Mm) Dsr 5.9 55.00 Metre 109.48 105.11 5780.78 14 Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A) Single Pole Dsr-2.10.1 9.00 Each 194.64 186.85 1681.68 15 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) A) 6 Way (4 + 12), Double Door Dsr-2.3.1 2.00 Each 1677.24 1610.15 3220.30 16 Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) A) 4 Way (4 + 12), Double Door Dsr-2.4.1 1.00 Each 3110.42 2986.01 2986.01 17 Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Dsr-2.10.3 2.00 Each 498.76 478.81 957.62 16 Installation, Testing And Commissioning Of Ceiling Fan, Including Wiring The Down Rods Of Standard Length (Upto 30 Cm) With 1.5 Sq. Mm Frls Pvc Insulated, Copper Conductor, Single Core Cable, Including Providing And Fixing Phenolic Laminated Sheet Cover On The Fan Box Etc. As Required Dsr 1.45 10.00 Each 257.74 247.43 2474.35 17 Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Dsr 1.25 10.00 Each 280.55 269.33 2693.32 18 Installation Of Exhaust Fan In The Existing Opening, Including Making Good The Damage, Connection, Testing, Commissioning Etc. As Required. Upto 450 Mm Sweep Dsr-1.50.1 7.00 Each 342.14 328.45 2299.17 19 Extra For Fixing The Louvers/ Shutters Complete With Frame For A Exhaust Fan Of All Sizes Dsr-1.51 7.00 Each 157.38 151.09 1057.62 20 Supply, Installation, Testing And Commissioning Of Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Metal( Aluminium Alloy) Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Steel/Al Body Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum As Below, 350 Rpm (Tolerance As Per Is : 374-2019), Thd (Total Harmonic Distortion) Less Than 10%, Suitable For Operation With Regulator For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 0C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Ceiling Fan Compliant To Is 374:2019 Fan I/C External Connections With 1.5 Sq.Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required. 9.2.3 10.00 Each 2075.64 1992.62 19926.18 21 Supplying And Laying Of Aluminium Conductor Pvc Insulated Armoured Served Sheathed Cable 1100 Volts Grade At The Depth Of 750 Mm Bellow Ground Level Over A Cushion Of 75 Mm Thick Sand All Around And Protected With Burnt Bricks On Side And On Top .On Surface The Cable Run Shall Be Fixed On Ms Clamps Etc.Of Suitable Size Or As Directed By The Engineer-Incharge ,Complete In All Respect.The Armouring Of The Cable Shall Be Properly Connected With The Earth Conductor By Clamps Etc. Following Size 10 Sqmm X 2 Core Mr 164.00 Rm 410.34 393.93 64603.77 22 Supply & Fixing Of 225/230Mm Sweep Ventilating (Light Duty) Exhaust Fan Complete With Metallic Blade (Steel Bird Guard Protector /Copper Motor For High Air Suction Performance /Capacitor Etc.), Noise Level : (45 - 50) Db, Power Consumption : 45 W, Rated Voltage : 230 V, Rated Frequency : 50 Hz, Motor Type : Normal Speed. Complete In All Respect. Mr 7.00 Each 1665.00 1598.40 11188.80 23 Cost For Murals Work 32.40 Sqm 5850.00 5616.00 181958.40 24 Cost For Solar Street Light With 7M Pole Complete 15.00 Nos 22600.00 21696.00 325440.00 25 Cost For C.C. Bench 12.00 Nos 10000.00 9600.00 115200.00 26 Cost For Dustbin 6.00 Nos 4500.00 4320.00 25920.00 1. Trenching In Ordinary Soil Up To A Depth Of 60 Cm Including Removal And Stacking Of Serviceable Materials And Then Disposing Of Surplus Soil, By Spreading And Neatly Levelling Within A Lead Of 50 M And Making Up The Trenched Area To Proper Levels By Filling With Earth Or Earth Mixed With Sludge Or / And Manure Before And After Flooding Trench With Water (Excluding Cost Of Imported Earth, Sludge Or Manure).. (Horti) 2.1 159.24 Cum 74.51 71.53 11389.98 2 Supplying And Stacking Of Good Earth At Site Including Royalty And Carriage Upto 5 Km Lead Complete (Earth Measured In Stacks Will Be Reduced By 20% For Payment). (Horti) 2.2 79.62 Cum 491.88 472.21 37597.13 Horticulture 3 Supplying And Stacking At Site Dump Manure From Approved Source, Including Carriage Upto 5 Km Lead Complete (Manure Measured In Stacks Will Be Reduced By 8% For Payment) : Screened Through Sieve Of I.S. Designation 20 Mm (Horti) 2.4.1 106.16 Cum 242.46 232.76 24709.88 4 Spreading Of Sludge, Dump Manure And / Or Good Earth In Required Thickness As Per Direction Of Officer-In-Charge (Cost Of Sludge, Dump Manure And / Or Good Earth To Be Paid Separately). (Horti) 2.8 159.24 Cum 49.94 47.94 7634.64 5 Mixing Earth And Sludge Or Manure In The Required Proportion Specified Or Directed By The Officer-In-Charge (Horti) 2.9 159.24 Cum 34.87 33.47 5330.39 6 Grassing With Selection No.1 Grass Including Watering And Maintenance Of The Lawn For 30 Days Or More Till The Grass Forms A Thick Lawn, Free From Weeds And Fit For Mowing Including Supplying Good Earth, If Needed (The Good Earth Shall Be Paid For Separately). In Rows 5 Cm Apart In Both Directions. (Horti) 2.10.1 530.80 Sqm 16.89 16.21 8604.46 7 Providing And Displaying Of Aglaonema Silver Queen Having 30 Cm To 45 Cm. Ht. With 12 To 15 Leaves, Multi Suckers, Fresh And Healthy Leaves, Well Developed In 25 Cm Dia Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.8 60.00 Each 154.50 148.32 8899.22 (Horti) Dsr 3.8 8 Providing And Displaying Of Aglaonema Dove Variety Having Ht. 30 Cm To 45 Cm With 8 To 10 Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.4 75.00 Each 77.42 74.32 5574.03 (Horti) Dsr 3.4 9 Providing And Displaying Of Aglaonema Marentifolium Variety Having Ht. 23 Cm To 30 Cm With 8 To 10 Leaves, Well Developed, Fresh And Healthy With Colorful Leaves In 20 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.10 50.00 Each 64.54 61.96 3097.83 (Horti) Dsr 3.10 10 Providing And Displaying Of Chamaedorea Elegans Palm Having Ht. 60 Cm To 75 Cm, Well Developed With Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.26 50.00 Each 102.70 98.59 4929.51 (Horti) Dsr 3.26 11 Providing And Displaying Of Croton Baby Golden Variety Having Ht.30 Cm And Above, Well Developed With Full Of Fresh And Healthy Leaves In 20 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.28 150.00 Each 39.11 37.55 5632.42 (Horti) Dsr 3.28 12 Providing And Displaying Of Croton Golden (Broad Leaves) Having Ht. 60 Cm To 75 Cm With 3 To 4 Branches, Well Developed, Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.32 150.00 Each 53.81 51.65 7748.01 (Horti) Dsr 3.32 13 Providing And Displaying Of Dieffenbachia Tropic-Snow Having Ht. 60 Cm & Above With 8 - 10 Leaves, Well Developed, Fresh & Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.40 50.00 Each 75.32 72.31 3615.28 (Horti) Dsr 3.40 14 Providing And Displaying Of Dieffenbachia Mosaic Having Ht. 30Cm To 45 Cm With 10-12 Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.41 50.00 Each 75.32 72.31 3615.28 (Horti) Dsr 3.41 15 Providing And Displaying Dianthus In Different Colour Well Developed With Fresh & Healthy Foliage 30 Cm Ht., In Full Bloom With Stacking In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.29 50.00 Each 51.79 49.72 2486.05 (Horti) Dsr 4.29 16 Providing And Displaying Gazania Hybrid In Different Colour Well Developed With Fresh & Healthy Foliage With Full Bloom In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-Incharge. (Horti) 4.31 150.00 Each 61.63 59.16 8874.49 (Horti) Dsr 4.31 17 Providing And Displaying Gaillardia Double Hybrid Variety Well Developed 30 To 45 Cm Ht 20 To 30 Fresh & Healthy Flower With Green Painted Bamboo Stick In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.75 120.00 Each 51.85 49.78 5973.11 (Horti) Dsr 4.75 18 Providing And Stacking Of Plant Mogra Of Height 25 To 30 Cm., 2 To 3 Branch In Earthen Pots Of Size 20 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.88 100.00 Each 44.03 42.27 4226.60 (Horti) Dsr 4.88 19 Providing And Stacking Of Plant Canna Dwarf Of Height 25 To 30 Cm., 2 To 3 Suckers In Earthen Pots Of Size 20 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.89 100.00 Each 34.25 32.88 3287.87 (Horti) Dsr 4.89 20 Bush Rose In Different Colour 2 To 3 Healthy Branch 30 Cm And Above Ht. Well Developed With 8 Or More Flowers / Flower Buds In 20 Cm Earthen Pot /Plastic Pot As Per Direction Of The Officer-Incharge. (Horti) 4.90 100.00 Each 24.47 23.49 2349.13 (Horti) Dsr 4.90 21 Providing And Displaying Budded Rose (H.T. Variety) 3 To 4 Healthy Branch 30 Cm And Above Ht. Well Developed With One And Above Flower Plant In 20 Cm Earthen Pot, As Per Direction Of The Officer-In-Charge. (Horti) 4.91 100.00 Each 31.29 30.04 3003.96 (Horti) Dsr 4.91 22 Providing And Displaying Standard Rose (H.T. Variety) 3 To 4 Healthy Branch 90 Cm And Above Ht. Well Developed With One And Above Flowers In 25 Cm Earthen Pot, As Per Direction Of The Officer-In-Charge. (Horti) 4.93 75.00 Each 143.77 138.02 10351.28 (Horti) Dsr 4.93 23 Providing And Stacking Of Plumeria Rubra Of Height 120-150 Cm. With 3-4 Branches And Thick Stem In Big Size Hdpe Bags As Per Direction Of The Officer-In-Charge. (Horti) 7.72 75.00 Each 381.60 366.34 27475.20 (Horti) Dsr 7.72 24 Providing And Stacking Of Polyalthia Longifolia (Ashok) Of Height 180-195 Cm. In Gunny Bag Of Size 30 Cm As Per Direction Of The Officer-Incharge. (Horti) 7.75 75.00 Each 95.40 91.58 6868.80 (Horti) Dsr 7.75 25 Providing And Stacking Of Saraca Indica (Sita Ashok) Of Height 105-120 Cm. In Big Poly Bags Of Size 25 Cm As Per Direction Of The Officer-In-Charge. (Horti) 7.80 75.00 Each 76.32 73.27 5495.04 (Horti) Dsr 7.80 26 Providing And Stacking Of Terminalia Arjuna Of Height 150-165 Cm. In Big Polybags Of Size 25 Cm As Per Direction Of The Officerin-Charge. (Horti) 7.88 75.00 Each 57.24 54.95 4121.28 (Horti) Dsr 7.88 27 Providing And Stacking Of Calliandra, Emarginata Of Height 45-60 Cm. In Earthen Pot Of Size 20 Cm As Per Direction Of The Officer-Incharge. (Horti) 8.5 150.00 Each 33.39 32.05 4808.16 (Horti) Dsr 8.5 28 Providing And Stacking Of Nerium Oleander (Kaner) Of Height 60- 75 Cm. With 5-6 Branches In Poly Bags Of Size 25 Cm As Per Direction Of The Officer-In-Charge.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
47.
Water Resources and Irrigation #11319368 Price Bid
Tender for Supplying Installation Testing And Commissioning Of 90 Watt Led 6000K Asymmetric New Generation Energy Saving And Environment Long Life Versatile Pressure Die Cast Aluminum Ip66 Roadway Luminaries With High Power Led Light Source Complete Etc. As Required Housing Reflector And Enclosed With Toughened Glass Complete With All Accessories, Philips/Bajaj/Crompton/Halonix/Havells. , Repairing And Installation Of Exisiting Defective Street Light With Replacement Of Drivers, Retifier, Led Plate Etc. Complete As Required At Site. , Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc. In The Existing Trench, Complete As Required. A) 63 Mm Dia (Od-63 Mm & Id-51 Mm Nominal) , Supplying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Sheathed Aluminium Conductor Armoured Power Cable Of 1.1 Kv Grade Of Following Size Etc Complete As Reqd. A) 4 X 16 Sq. Mm , Supplying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Sheathed Aluminium Conductor Armoured Power Cable Of 1.1 Kv Grade Of Following Size Etc Complete As Reqd. B) 4 X 25 Sq. Mm , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. (I). 3X2.50 Sqm. , Supplying And Erection Of Flange Mounted Hot Dip Galvanized Octagonal Poles Of 8 Mtr. Height Made From 3Mm Thick Steel Plate Having Bottom Dia Of 130 Mm & Top Dia Of 70Mm Complete With Window With Flash Cover At The Height Of 2.00 Mtr From The Base Of Cable Termination Block Etc. And Galvanization Base Plate Of Size 250Mm X 250Mm X16mm Thick On Existing Cement Concrete Pedestal As Required Including Suppling And Fixing Of Laminated Sheet, Din Channel, Bus Bar And Earth Sheet 2 Nos. Welded At Suitable Height As Per Direction Of Enginer-In-Charge. 2 Nos. Washer, Nuts And Locking Arrangement Completed As Required (Make Bajaj/Volmont/Phillips/Lysaght/Consoul) , Supplying & Fixing Of Following Size Aluminium Thimble With Proper Connection And Pvs Tape Etc As Required. 16 Sqmm , Supplying & Fixing Of Following Size Aluminium Thimble With Proper Connection And Pvs Tape Etc As Required. 25 Sqmm , Fabrication Supplying And Installation Of Outdoor Type Cubical Feeder Pillar Of Suitable Size Not Less Than 30 Cm And Upto 45 Cm Deep Made Out Of M.S. Sheet 2Mm Thick (14Swg) Duly Compartmentalized Having 4 Strip Busbar Of 200 annual periodical maintenance Capacity Double Door With Locking Arrangements For Protection From Rain Dust Duly Fixed On M.S. Angle Iron Frame Work Of Size 50 Mm X 50 Mm X 6 Mm (Ns) 110 Cm Long Legs Out Of Which 50Cm Duly Grouted In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Agreegate 20Mm) Having Following Accessories Mounded Inside The Cubical Panel Including Connection Inter Connection/Soild With Aluminum Timbles Earthing With Two Nos. Earth Studs Duly Painted With One Coat Of Red Oxide And Two Coats Of Superior Quality Enamel Paint Completed Etc. As Required Having Also Compartment For Energy Meter. Supplying And Fixing Of Following Accesssories In The Existing Cubical Panel Board/Feeder Pillar Including Connection Testing Etc. As Required Having Also Compartment For Energy Meter Supplying And Fixiing Of Folowing Accessories In The Existing Cubical Pnal Board/Feeder Pillar Including Connection Testing Etc. As Required Incomer 125 annual periodical maintenance .35Ka Mccb With Thermal Release 1 No. Outgoing A) 63Amp - Dpmcb - 6 Nos. B) 63Amp - Elcb - 1 Nos. C) C.T. Opetrating . D) Tongal Switch E) Voltmeter 0-5000 Volts 96 Sqm Flush Type With Selector Switch F) Ampere 0-100/5 Sqmm Flush Type With Selector Switch & 100/5 annual periodical maintenance Ratio Cts G) Indication Lamp (Ryb) With Control 3 Pole (Ml-6) 95 annual periodical maintenance H) Power Contactor 3Pole (Ml-6) 95 annual periodical maintenance I) Auto Timer Rex Modular D41 Model Mds Make J) Danger Notice Plate. , Supplying And Drawing Following Sizes Of Pvc Sheathed & Xlpe Insulated Al. Conductor Multicore Unarmoured Cable Of 1100 Volts Conforming To Is 7098 (Part 1) 1988 With Upto Date Amendments In The Existing Panel Ets As Required.. A) 3 Core 4 Sq.Mm , Supplying And Fixing 4 Nos. 16 Mm (Minimum) Dia X 650 Mm(Minimum) Long Gi Foundation Bolt (En8grade) With Nuts, Washer Including 2 Nos. Template Of 3 Mm Thick Size 200 X 200 Mm. With 4 Nos. 20 Mm. Dia Holes (Or Suitable For Existing Holes), To Match With Pcd Of Pole Base Plate As Required. , Fabricating, Supplying And Fixing Of Wire Mesh Protection Frame Work Fabricating With 40 X 40 X 6 Mm Thick Angle Iron/Tee Iron Having Intermediate Members Of Size 25 Mm X 6 Mm (Gi Wire Should Be 6Swg) Flat Strip Welded At 30 Cm In Each Sections & Duly Welded With Hard Drawn Wire Fabric Mesh Of Size 25 Mm X 75 Mm Having Weight Not Less Than 7.5 Kg/Sqmtr. And Making Main Door Gate Provided With Two Nos. Sliding Bolt With Godown Locks With Operating Hadle Welded From Inside Of The Door I/C Providing And Fixing Of Four No. Legs Of Same Angle Size Of 90 Cm Length Duly Grouted In Foundation (30 X 30 X 45) Cm (Deep) In 1:2:3 Cement Concrete & Painting With One Coat Of Red Oxide & Two Coat Of Super Synthetic Luminous Paint Of Approved Colour And Quality Etc.Complete As Reqd. {Area Of Hard Drawn Wire Fabric With Angle (Except Legs) Shall Be Measured For Payment} , Fabrication, Designing, Supplying & Fixing Of 1000 Mm Long Double Arm Bracket(Thickness Minimum 3Mm) Over Hang With Tightening Bolt Etc. As Per Design Approved By Engineer-In-Charge. , Providing And Fixing Of Locking System Of Street Light Including Pole Door For Safety Cover Plate Of M.S Sheet Including Weilding, Nut-Bolt Etc. And Painting Of Door Cover Plate With Synthetic Enamel Aluminium Paint. , Supplying, Installation, Testing And Commissioning Of The Following Material Required For Existing Feeder Panel Including All Accessories For Connetion Etc As Per Site Requirement:- 63 annual periodical maintenance - Dpmcb , Supplying, Installation, Testing And Commissioning Of The Following Material Required For Existing Feeder Panel Including All Accessories For Connetion Etc As Per Site Requirement:- 125 annual periodical maintenance Tpn , Supplying, Installation, Testing And Commissioning Of The Following Material Required For Existing Feeder Panel Including All Accessories For Connetion Etc As Per Site Requirement:- 63 annual periodical maintenance - Mccb , Supplying, Installation, Testing And Commissioning Of The Following Material Required For Existing Feeder Panel Including All Accessories For Connetion Etc As Per Site Requirement:- Ct Operating , Supplying, Installation, Testing And Commissioning Of The Following Material Required For Existing Feeder Panel Including All Accessories For Connetion Etc As Per Site Requirement:- Tongal Switch , Supplying, Installation, Testing And Commissioning Of The Following Material Required For Existing Feeder Panel Including All Accessories For Connetion Etc As Per Site Requirement:- Power Contactor 3 Pole (Ml-6) 95 annual periodical maintenance , Supplying, Installation, Testing And Commissioning Of The Following Material Required For Existing Feeder Panel Including All Accessories For Connetion Etc As Per Site Requirement:- Ampere 0-100/5 Sqmm Flush Type With Selector Switch & 100/5 annual periodical maintenance Ration Cts , Supplying, Installation, Testing And Commissioning Of The Following Material Required For Existing Feeder Panel Including All Accessories For Connetion Etc As Per Site Requirement:- Timer Into The Existing Street Light Panel Box Including All Accessories For Connection Etc. As Per Site Requirement. , Providing And Laying In Position 1:2:4 Reinforced Cement Concrete Foundation Of Size 500 Mm.(L) X 500 Mm. Wide And 1200 Mm. Deep I/C Excavation Of Earth In Hard Rock, Providing Cutting, Bending And Placing In Position, Steel Reinforcement Of Cold Twisted Bars Of 12 Mm. Dia- 1300Mm Long (Approx)- 8 Nos. And Reinforcement Ring Of Cold Twisted Bar Of 8Mm Dia - 2000Mm (Approx) - 10Nos. (With Equal Spacing) For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete As Required With Positioning Of Foundation Bolts (As Per Item Below) And Providing 63 Mm. (O.D) Dwc, Hdpe Pipe Minimum 1 Mtr. For Cable Entry & Exit As Required. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level A) 1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) : 6 Graded Stone Aggregate 20 Mm Nominal Size) , Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc/ Hume/ Metal Pipe As Required. A) Upto 35 Sqmm , Repairing Of Defective/Faulty Cable Connection Inside The Pole Window And Underground Cable By Making Connection With Suitable Size Pvc Insulated Copper Wire, Connector Plate, Thimble And Taping With Insulation Tape For Existing 5 Mtr. To 12 Mtr. Height Gi Pole I/C Testing & Commissioning Etc. Complete As Required At Site , Laying Of Al. Conductor Armoured/Unarmourd Power Cable 1.1 Kv Between Pole To Pole With The Help Of Tower Wagon, Including Supplying Of 10 Swg Gi Wire, In Following Manner, A) Upto 3.5X35 Sqmm. Overhead Tied With Suitable Size Schakle Clamp And Insulator , Painting By Double Coating Aluminium Silver Paint Of Street Light Poles Of Height 8 Mtr Sizes I/C. Pole Brackets Of Various Designs After Cleaning And Scrabbing Of Poles For Removing Of Any Posters/Rusts If There To Give Even Shade Etc. As Reqd. , Earthing With G.I. Earth Pipe 4.5 Meter Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal/ Coke And Salt As Required. , Supplying And Laying 25Mm X 5Mm G.I Strip At 0.50 Metre Below Ground As Strip Earth Electrode, Including Connection/ Terminating With G.I. Nut, Bolt,Spring,Washer Etc. As Required. (Jointing Shall Be Done By Overlapping And With 2 Sets Of G.I. Nut Bolt & Spring Washer Spaced At 50Mm) , Excavation For Cable Trenches In Soft Soil, Depth Upto 1.2 M Including Dressing Of Sides Lift Upto 1.5 M, Including Getting Out The Excavated Soil, Refilling With Sand And Or Good Soil After Laying Of Cable/ Pipe Etc In Layers Of 20 Cm, Ramming, Watering And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 Metres. , Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing Along With Existing Surface/ Recessed Conduit/ Submain Wiring/ Cable As Required , Deployment Of Hydra Crane With Boom Lift Cage Bracket Or Other Arrangement Of Required Capacity With Fuel And Driver Fro Fixing/Removal/Replacement Of Lights Mounted On Pole, Bracket, Electric Wiring Pole, Pole Window Accessories Etc. As And Required As Per Direction Of Engineer In Charge. , Deployment Of 01 No. Skilled/Wiremanm And 01 Nos. Unskilled Worker/Helper For Day To Day Maintanence, Repairing And Watch &Ward Of The Street Light On The Bundh Roads From Dhansa To Jhatikra For 01 Year Of I&Fc Deptt. , Deployment Of 01 No. Skilled/Wiremanm And 01 Nos. Unskilled Worker/Helper For Night Shift For Maintanence, Repairing And Watch &Ward Of The Street Light On The Bundh Roads From Dhansa To Jhatikra For 01 Year Of I&Fc Deptt.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
48.
Defence #11318521 Technical Bid
Tender for Demolition Of Cement Concrete (Unreinforced) Any Description And In Any Position Not Otherwise Specifically Provided And Removing The Debris Outside The Defence Land Complete All As Specified And As Directed. , M&L For Plain Cement Concrete Type - D2 (1:3:6) (Using 40Mm Graded Stone Aggregate) As In Mass Concrete Complete All As Specified And As Directed. , Dismantling Stone Slabs And Tiles Laid Bedded And Pointed In Any Mortar Of Anydescription Or Thickness Infloors, Aprons Etc. Complete All As Specified And As Directed. , M&L Screed Bed Or Bedding Layer Of Mortar 20Mm Thick Using Cm (1:6) For Laying Floor Finishes Complete All As Specified And As Directed , M&L Chequered Cement Concrete Tiles With Grey Cement And Pigment Of Size (20Cm X 20Cm X 25Mm/300Cm X 300Cm X 25Mm) Thick Set And Jointed In Neat Cement Slurry In Floors Complete All As Specified And As Directed , M&L For Precast Concrete Interlocking Paver Blocks With Grey Cement And Pigment Any Shape And Size, Shade As Approved By Ge, 80Mm Thick Conforming To Is 15658-2006 M-40 Gradecomplete All As Specified And As Directed. , M&L For 40M M Thick Sand Filling Under Floors Or In Foundations Including Watering And Consolidation Complete All As Specified And As Directed. , Dismantling Of Posts Struts (Steel Or Rcc) Any Section Incl Taking Out Embedded Portion In Concrete Or Brick And Making Good Disturbed Ground Complete All As Specified And As Directed. , Dismantling Of Fencing Wire Mesh, Any Type Complete All As Specified And As Directed. , Excavation In Post Holes (Or Similar Holes) Each Not Exceeding 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering And Removing Surplus Soil To A Distance N Exc 50 M In Hard/Dense Soil Complete All As Specifed And As Directed , S&F Mild Steel Work Of Angle Iron Or Flat Iron Etc For Railings, Balusters, Nosing To Steps Including Embedding In Concrete And Screwing Etc, Flat Iron For Posts & Struts In Fencing Including Cutting Tops To Shape As Directed, Drilling Holes, Notching For Wire, Etc.; Flat Iron Fillets (For Securing Wire Mesh Etc.) Including All Necessary Drilling, Bolting Or Riveting, Etc & Similar Work Conforming To Fe 290 Complete All As Specified And As Directed. , S & F Ms Tie Bars 50Mmx6mm Thick With Screwed Ends, Nuts, Washers And Mild Steel Plates For Walls, Chimneys, Roofs, Arches, Etc. King Rods And Straining Bolts Conforming To Fe 290 Gde-E-165. Complete All As Specified And As Directed. , Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided Complete All As Specified And As Directed. , M & L For Mild Steel Round Bars 10 Mm Dia And Over, Cut To Length, Bent To Shape Required Including Cranking, Bending, Spirally Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.90Mm Dia, Complete All As Specified And As Directed. , Supply Only Chain Link Ms Galvanized Fencing Any Size And Any Type Complete All As Specified And As Directed. , Fixing Only Chain Link Ms Galvanized Fencing Including Wires Any Mesh, Size And Any Type Of Standards Rails, Straining Bolts Etc Including Provision Of Binding Wires Complete All As Specified And As Directed. , S & F In Repairs Galvanised 2 Strand Steel Barber Wire 2.24 Mm Dia Barbed With 2Mm Dia Barbs At 75Mm Spacing And Straning And Fixing To Any Type Of Standrad Rails Straining Bolts Including Securing Or Tying At Crossing With And Provision Of Galvanised Mild Steel Wire Staples Or Steels Pins Including Taking Down Etc As Directed ( Each Line Of Wore To Be Measured) Complete All As Specified And As Directed. , Mild Steel Screw Bolt 11 To 15 Mm Shank Dia Neck (Machine Made) With Hexagonal Or Square Head At One End And Screws The Other, Or Screwed Both Ends, Each Screwed End To Be Fitted With Washer And One Hexagonal Or Square Nut Exc 5 Cm N.Exc 10 Cm Long Complete All As Specified And As Directed. , M&L For Preparation Of New Steel Surfaces Of Any Description Over 10 Cm Width Or Girth, Not Otherwise Described And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Complete All As Specified And As Directed. , Materials And Labour For Plain Cement Concrete (1:3:6) Type C-2 Using 40 Mm Graded Aggregate As In Surface Channels And Drains Complete All As Specified And Directed. , Formwork To Faces Of Walls, Retaining Walls, Abutments, Parapets & Staircase Railing And Similar Work Including Attached Pillasters, Buttresses, Etc.; Vertical Or To Better Rough Finished Surfaces Of Concrete Flat, Complete All As Specified And As Directed. , Materials And Labour For Extra For Forming Fair Finishing To Surfaces Drain/Channel 30 Cm Inner Girth In Cement Concrete ,Using Extra Cement Incl Forms, Moulds Etc Complete All As Specified And As Directed. , M&L For Rendering 15 Mm Thick Plaster On Fair Faces Of Brick/Concrete Surfaces In Cm (1:6) On Internal Wall Surface, Finished Even And Smooth Without Using Extra Cement. Complete All As Specified And As Directed. , M & L For Plain Cement Concrete 1:3:6 Type C2 (Using 40 Mm Graded Aggr) In Foundations, Filling And Massconcrete. Complete All As Specified And As Directed. , S & F Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws.Complete All As Specified And As Directed. , Dismantling Plain Or Corrugated Steel Sheeting Any Thickness, Complete All As Specified And As Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
49.
Petroleum and Natural Gas #11318138 AOC
Bids Are invited for Providing and Laying RCC M20 Concrete - As detailed in the tender document , Waterproof Cement Painting Works - As detailed in the tender document , Supply and Installation of ACP Vinyl Sign Boards - As detailed in the tender document , Slogan Artwork and HPCL Logo Painting - As detailed in the tender document , Vinyl Replacement Work on Existing ACP Boards - As detailed in the tender document , Supply and Installation of Backlit Flex Boards - As detailed in the tender document , Granular Sub Base Work - As detailed in the tender document , Wet Mix Macadam Road Work - As detailed in the tender document , Thermoplastic Road Marking Work - As detailed in the tender document , Providing and Laying 80mm Paver Block Flooring - As detailed in the tender document , Supply of 4 inch 150 Gate Valve - As detailed in the tender document , Supply of Double Hydrant Post IS 5290 - As detailed in the tender document , Supply of FRP Hose Box Cabinet - As detailed in the tender document , Supply of 63mm Fire Hoses 15m Length - As detailed in the tender document , Supply of Jet Nozzles with Branch Pipe - As detailed in the tender document , Supply of Landing Valves for Hydrant System - As detailed in the tender document , Supply of 4 Sqmm Copper Earthing Cable - As detailed in the tender document , Stenciling Work Below 2 inch - As detailed in the tender document , Stenciling Work 2 inch to 4 inch - As detailed in the tender document , Supply of 12mm SS Bolts with Nuts and Washers - As detailed in the tender document , Supply of 10mm SS Bolts with Nuts and Washers - As detailed in the tender document , Supply of 25mm Rubber Mats for Cylinder Handling - As detailed in the tender document , Supply and Fixing of Precast Kerb Stones - As detailed in the tender document , Supply of Pressure Gauge Testing Kit - As detailed in the tender document , Supply of Hydrant Hose Testing Kit - As detailed in the tender document , Supply of LPG Hose Testing Kit - As detailed in the tender document , Relay Testing and Thermography of Electrical Panels - As detailed in the tender document , Porta Cabin Flooring Repair Work Cement Sheet and PVC Carpet - As detailed in the tender document , Porta Cabin Interior Repair Work Plywood with Lamination - As detailed in the tender document , Painting Work for Porta Cabin - As detailed in the tender document , Supply and Fixing of Zebra Blinds - As detailed in the tender document , Supply and Installation of 1.5 TR Split Air Conditioners - As detailed in the tender document , Supply and Installation of 2.0 TR Split Air Conditioners - As detailed in the tender document , Fabrication and Installation of Sliding Gate Parking Shed Structure - As detailed in the tender document , Servicing and Maintenance of Industrial Valves - As detailed in the tender document , Supply and Plantation of 4 to 6 Ft Plants - As detailed in the tender document , Grass Lawn Development Work - As detailed in the tender document , Supply of High Back Revolving Chairs - As detailed in the tender document , Supply of Visitor Chairs Cantilever Type - As detailed in the tender document , Supply of Safety Belts - As detailed in the tender document , Supply of Industrial L3 Managed Network Switch - As detailed in the tender document , Supply of 40G SFP Modules - As detailed in the tender document , Supply of 10G SFP Modules - As detailed in the tender document , Supply of 1G SFP to RJ45 Converter - As detailed in the tender document , Supply of Flow Meter - As detailed in the tender document , Micro Grading of Ground Surface - As detailed in the tender document , Supply and Installation of 150 LPH Water Cooler - As detailed in the tender document , Supply and Installation of RO Water Purifier - As detailed in the tender document , Hiring of Hydra Crane 10 to 14 Ton Capacity - As detailed in the tender document , Hiring of Tractor with Operator - As detailed in the tender document , Hiring of JCB Machine with Operator - As detailed in the tender document , Supply and Installation of Mitsubishi PLC Analogue Output Card - As detailed in the tender document Total Quantity : 22065
Contract Date: Ref. Documents Contract Value : 98.23 Lakh
Boards / Undertakings / PSU No of Bidders 4
50.
Power #11316393 Technical Bid
Tender For Various Works Related To Installation Of New Distribution Transformers Of Various Capacities As Per E-Tender Specifications On Semi-Turn Basis Under Business Plan 2026-27- 1 Safe Carriage Of Following Materials From Store Centre Or From Any Other Place To The Respective Site Of Work Through The Kachha Pacca Road Including The Work Of Its Loading & Unloading At The Respective Ends, Also Including The Work Of Dragging Etc. And Also Including The Cost Of Labour, T&P Carrier Etc. Required For Proper Completion Of Work As Per Respo Norms. 2 Pcc Pole 8.5 Mtr. Long 3 St Pole 11 Mtr. Long 4 11 Kv Polymeric Disc Insulator 5 11 Kv Disc Fitting 6 11 Kv Polymeric Pin Insulator 7 V-Type Steel Cross Arm 8 Single Phase Transformer 16 Kva 9 11/0.4 Kv Tf 25 Kva 10 11/0.4 Kv Tf 63 Kva 11 11/0.4 Kv Tf 250 Kva 12 11 Kv Tpmo 13 Stay Set Complete 16X1800 14 Acsr Weasal Conductor 15 Acsr Rabbit Conductor 16 Cable Abc 3X50+1X35+1X16 Sq.Mm. 17 Cable Abc 3X95+1X70+1X16 Sq.Mm. 18 Cable Abc 3X120+1X95+1X16 Sq.Mm. 19 Three Phase Distribution Box 20 Supply & Erection Work Of Following Materials:- 21 Ms Channel (Dropper) 100X50X2028Mm (For Fuse Set) 22 Earthing Complete 23 11 Kv Fuse Set 24 Stone Pad 300X300X75Mm 25 Cross Arm Holding Clamp With N&B 26 Ms Channel 125X65X1300 Mm (T-Off) 27 Clamp For Lt T-Off With N&B 28 Holding Clamps For Top Channel Tpmo & Fuse Set With N&B 29 Ms Angle 75X75X6X2028Mm With Clamp N&B (T/F Base) 30 Ms Top Channel (125X65X2240Mm) 31 Lt Fuse Set Protection Unit For 63 Kva Dt With Smc Box 32 Lt Pvc Cable 3.5X70/35 Sq.Mm. 33 Danger Board With N&B 34 Barbed Wire Including Jumper 35 Three Phase Distribution Box 36 Three Phase Distribution Box Clamp 37 Suspension Clamp 38 Pg Clamp 39 Dead End Clamp 40 Eye Hook 41 Concreting Of Pole 42 Al Lug Long Barrel Off Size (Ls) 43 Henley Type Tailless Unit Protection Cubical Pannel 500A, 650V, 250 Kva Dt. 44 Copper L-Piece 50X225X10Mm (Ls) 45 Copper L-Piece 62X225X12Mm (Ls) 46 Lt Xlpe Cable Al 3.5X400 Sq.Mm. 47 Number Plate With N&B 48 Concreting Of Stay 49 F-Bracket For Fitting Top Insulator With N&B 50 Lt Clamp With N&B For Pcc Pole For Neutral 51 Lt Shackle Insulator 100X155Mm 52 Bolt & Nut For Shackle 53 Clamp With Nut Bolt 54 Body And Neutral Earthing Of 250 Kva Distribution Transformers Installed By Digging Of Pit Up To Water Level Depth (Approx. 100’) And Then Inserting 1-1/4\ Dia G.I. Pipe Of \B\ Grade, Conforming To The Requirement Of Is Specification And Then Connecting The Top Of The Inserted Pipe And Transformer Body Through Gi Strip Of Size 50X6 Mm With The Help Of Nut And Bolt Or Through Gas Welding, As Per Direction Of Supervising Engineer Including The Cost Of Arrangement Of All Material, Labourer, T&P, Carrier Etc. Required For Proper Completion Of Work. 55 Construction Of 250 Kva Distribution Transformers Of Plinth Of Size 5’X5X4’ Above Ground Level And One Ft. Below The Ground Level Of 9”. After Excavation Of 4” Earth, Brick Ballast Shall Be Provided And Rammering Will Be Done Properly After That A Retaining Wall Of 9” Width By First Class Brick In Ratio 1:4 Of Cement And Sand Shall Be Made. The Earth Shall Be Filled Up To One Ft. Below The Top Of The Plinth. After This Brick Ballast Shall Be Provided Up To 6” From The Earth Level And Proper Rammering Shall Be Done. One No. Jall Of 12 Mm M.S. Tor Shall Be Fixed In The Hollow Of Plinth And One Ft. Thick Rcc In Ratio Of Cement, Sand And Stone Ballast Shall Be Laid On The Top Of The Plinth. The 12 Mm Thick Plastering Shall Be Done All Around The Plinth In 1:4 Ratio Of Cement And Sand. The Contractor Shall Be Responsible To Complete The Work As Per Direction Of Supervising Engineer. It Including The Cost Of All Material, Labour T&P, Carrier Etc. Required For Proper Completion Of Work. 56 Fabrication & Erection Of Fencing And Construction Of Retaining Wall Around Of 250 Kva Transformers.The Complete 11/0.4 Kv Substation Shall Be Provided With Two Meter Height Fencing And Retaining Wall Around The Substation. One No. Gate With Proper Locking Arrangement For Entry Of Personnel Shall Also Be Provided. The Fencing Shall Be Made Of 50X25 Mm X10 Swg Rectangular Welded Mesh Of Wire Mesh In Length. Wire Mesh Shall Be Fixed On Panels Made Of 50X50X6 Mm M.S. Angle. The Wire Mesh On Panels Will Be Supported By 25X3 Mm M.S. Flat On All The Bracings Diagonally And 50X6 M.S. Flat Horizontally At The Center Of The Panel. The Panel Will Be Joined By Bolts & Nuts Of Appropriate Size With Each Other And On The Main Support On Corners Including Supply Of All Material, Labour, Carrier And T & P Etc. Required For Proper Completion Of Work. The Painting Of Complete Fencing Shall Also Be Done With One Coat Of Red Oxide Primer And Two Coat Of Synthetic Green Paint. For Construction Of Retaining Wall Around The Fencing, Excavation Of Earth Shall Be Done In Foundation In Ordinary Soil Including Disposal Of Surplus Earth At Some Suitable Distance. The Dimension Of Excavation Shall Be 1M Wide, 0.45 M Deep And Suitable Length As Per Wire Mesh. After Excavation Of Earth A Cement Concreted Pad Shall Be Laid In Foundation. Concreting Shall Be Done With Ist Class Brick Ballast, Coarse Sand And Cement In Proportion Of 8:4:1. First Class Brickwork Shall Also Be Done In Foundation And Super Structure In 1:6 Cement And Coarse Sand Including Necessary Cutting And Moulding Of Bricks In Foundation Depth Of Wall 0.30 M, Thickness Of Wall 0.35 M & Superstructure Brick Work Thickness Of Wall 0.23 M & Depths 0.30 M Including Supply Of All Material, Labour, Carrier And T & P Etc. Required For Proper Completion Of Work.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
TenderDetail
Loading tenders