View Bid Results For Radio Frequency Analyser Tenders

We found 26 Bid Results related to radio frequency analyser tenders. You can find Contractor details who won radio frequency analyser tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–1 of 26 tenders matching your filters

Health and Family Welfare #11268210 AOC

Contract Date: Jun 11, 2026 Contract Value : ₹ 28.17 Lakh

Government Departments No of Bidders 5

Tamil Nadu View Result →

Health and Family Welfare #10894980 AOC

Contract Date: May 06, 2026 Contract Value : ₹ 1.62 Crore

Government Departments No of Bidders 10

Haryana View Result →

Educational and Research Institute #10524394 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 15

West Bengal View Result →

Health and Family Welfare #10433257 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 8

Jharkhand View Result →

Educational and Research Institute #9832816 AOC

PROCUREMENT OF MACHINERIES, INSTRUMENTS, TOOLS AND EQUIPMENTS ETC. RELATED TO ELECTRICAL ENGINEERING AND ELECTRONICS AND TELECOMMUNICTION ENGINEERING LABORATORIES AND WORKSHOPS OF MATHABHANGA GOVERNMENT POLYTECHNIC, MATHABHANGA, COOCH BEHAR, WEST BENGAL- 1 ANALOG ELECTRONICS LAB-I (3RD SEM) 2 50 MHz Dual Channel CRO• Automatic Measurements of Signal Parameters like .Pk-Pk, Average, Max. , Min., rms, top etc. Voltages and Frequency, Period,Width,Duty Cycle, Rise Time, Fall Rime • Waveform and Set up storage facility.• Colour Display. • Advanced features like sequential acquisition of up to 1000 trigger events should be possible.• Standard USB Host & Device Connectivity. • Standard 23 Automatic Measurement andMath Function Including FFT.• Education student Lab guide and professor slide set.DETAILED TECHNICAL SPECIFICATIONS:-a)No. Of Channels:2b)Bandwidth :50 MHzc)Maximum Input:400 V (peak ac + dc) d) Sample Rate :1 GSa/sece)Waveform Update Rate : 400 Waveforms/secf)Memory : 16 Kpts/Ch.g)Time Base : 5nsec / div. To 50 sec./div.h) Resolution : 8 bitsi) Display: 5.7 inch Colour QVGA TFT LCD Display.j)Trigger Modes: Force, Edge, and Video, Pulse width.k) Built In Interface : Standard USB 2.0 (Host and Device)l)Power Supply: 230 V AC Supply, 50 Hz. 3 Function Generatori)Itshould be a waveform / function generator which can be upgraded to an arbitrary waveform generator . It may also have the feature upgrade the frequency of operationii) Should have low harmonic distortion and jitter.DETAILED TECHNICAL SPECIFICATION:--• Frequenc : 1Hz. to 20 MHz for Sine , Square and PulseWaveforms and 1 Hz. to 20 MHz. for Noise• No. of Channels: 1• Frequency Resolution : 1Hz.• Amplitude : 1 mVpk-pk to 10 v (pk - pk) in 50 ohms. • Duty Cycle for Pulse : 0.01 % to 99.99 %• Standard Waveforms: Sine,Square,Ramp,Pulse,Triangle,•Operating Modes: Continuous,Modulate,. .• Modulation Types: AM,FM,PM,FSK,BPSK,PWM• AM : Source both Internal & External, Depth 0 to 120 %With 0.01 % resolution.• FM : Source both Internal & External, Deviation 1Hz to 15 MHz• PM: Source both Internal & External, Deviation 0 to 360 deg C.• PWM : Source both Internal & External. Deviation 0 % to 100 %.• Power Supply : 230 v,50 Hz. ac. 4 Digital MultimeterDC Voltage:400mV to 1000V , AC Voltage: 400mV to 1000V,DC Current: 4mA to 10A, AC Current: 4mA to 10A, Resistance: 100 ohm to 40Mohm, Resistance: 100 ohm to 40Mohm,Capacitance: 4nF to 200µF, Duty Cycle: 0.1% to 99.9%, Frequency: 10Hz to 10MHz, Temperature: 20oC to 750oC,Transistor Test: Yes (for NPN & PNP), Diode Test: Yes, Continuing Buzzer: Yes, Power Supply: 9V, Manual and Auto ranging,Display: 4½ Digit 5 To study the V-I characteristics of UJT Trainer kitVariable DC Power Supply 1.2V to 12V/500m,A DC Power Supply for DPM 5V/500m,A UJT (2N2646) UJT Characteristics UJT Relaxation Oscillator with two different Timing Capacitors ,DigitalMeters for Measuring Voltage and Current ,Set of Patch Chords & User Manual 6 To study the input and output characteristics and to find the h-parameters of a BJT for : —(a) C-E configuration,(b) C-C configuration,(c) C-B configurationHARDWARE SPECIFICATIONS :Dual Variable DC Power Supplies 0V to 12V/500mA and0V to 15V/500mA DC Power Supply for DPM 5V/500mAIndependent Base Limiting Resistors - 2 Nos.(low value) Independent Collector Resistor - 1 No. Transistor( NPN Type SL100) .All Inputs/Outputs through 2mm Sockets set with provision of Digital Multimeter for measuring input and output. 7 ANALOG ELECTRONICS LAB-II (4TH SEM) 8 Feedback Amplifier Trainer12 V DC supply with +/- 10%accuracy,configurable circuit,Inbuilt sine wave generator with frequency range 10 Hz to 10 KHz rangeand Amplitude variation 10mV to 4V, NPN transistor. Voltage Series & Shunt and Current Series & Shunt configurable operation. 9 Oscillator Trainer KITi) Hartley, Colpitt ,Wien Bridge Oscillator Trainer kit : i) NPN Transistor ii)On boardoscillator section,separate tank circuit (iii)Biasing Voltage :+12 V , -12 V ,+12V SMPS Adaptor provided with the trainer for power supply.Designed by considering all the safety standards. Provided with an extensive manual.Power Supply to Kit: 230VAC,50Hz, All interconnections are made using 2mm banana Patch cords 10 To determine the following characteristics of op-amp: —a) input offset voltage, b) slew rate, c) non-inverting gain, d) inverting gain e) adder, f) subtractor, g) differentiator, h) integratorandi) voltage followerTo adjust offset null, setup the closed loop amplifier using IC741 op-amp also to (a) dc gain (b) ac gain. The set complete with +/-12V DC regulated power supply with milli voltage source, Null arrangement and 2V/20V dual range digital voltmeter , In built sine wave,triangular wave & square wave Generator of1 KHz, 15V Vpp (approx.), DC Power Supply : 0 - 5 V (vary through (2No.) rotary switch for specific voltage level 11 DIGITAL ELECTRONICS LAB (3RD SEM) 12 Complete setup to implement encoder, decoder ,multiplexer andde-multiplexer5V D.C. at 100mA, IC regulated power supply,21 Input Switches for data input,IC For Multiplexing 74150 is provided on board with Combinational Circuit, IC For Demultiplexing 74154 is provided on board with Combinational Circuit, One Not Gate is provided on board using 7404 ,16 Output LEDs with driver circuit to observe the output of Multiplexer Demultiplexer, A Pulser to provide the pulses manually for triggering,230 V ±10% at 50 Hz A.C. Mains,necessary patch cords and user mannuals. 13 Complete setup to design / construct parity generator, checker andcomparatorDC Regulated Power Supply 5 VDC/150 ma,5 SPDT switches provided for selecting logic ‘1’ & logic ‘0’,2 output indicators,Sufficient no of 4mm Patch Cords for Interconnection,Power Cords 230v, 50Hz,necessary patch cords and user mannuals. 14 Complete setup to design / construct binary synchronous and asynchronous counterTrainer kit for binary Synchronous and Asynchronous counter. with power supply, display unit, patch cords, manuals and necessary IC. 15 Digital I.C TesterUniversal IC tester: 40 pin DIP ZIF socket, 50 cherry keys Key pad and 16 X 2 LCD Display, suitable for testing of Analog IC, Digital IC and 7-segment display. 16 A/D & D/A Converter TrainerFEATURESAnalog To Digital Converter• 8-bit descrete ADC•12-bit monolithic ADC IC•On-board signal generator with adjustable amplitude levels•On-board LED bank to observe digital outputs•Power supply : +5V, ±12V GND•Interconnection is provided by 2mm connectors•Experimental manualDigital To Analog Converter•8-bit binary weighted resistors DAC•8-bit ladder type D to A converter•8-bit D to A converter using monolithic IC•Simple construction using Op-Amp and resistors•Onboard switches are provided for digital pattern generation•8-bit digital inputs ranges from 00 to FF•Variable frequency counter to study the settling timeSPECIFICATIONS•8-bit binary weighted and 4-bit ladder type DAC are constructed using discrete components•8-bit monolithic DAC having settling time in the range of ns, wide power supply range, low power consumption, full scale error ± 1LSB•8-bit digital ramp ADC constructed using discrete components•12-bit monolithic ADC having conversion time in the range of μs, industry standard pin out, wide input range•8 onboard switches to provide digital inputs to DAC•8-bit counter running on external clock frequency to study settling time of DAC• Built inlow frequency clock generator•1 KHz sine wave with adjustable amplitude level•Onboard variable DC voltage source for studying unipolar and bipolar modes of ADC •12 output LEDs to observe ADC outputs•ADA operates on DC power supply (+12V,-12V,+5V and GND)•Interconnection is provided by standard 2mm connector•Extensive experimental manual is provided with the kit EXPERIMENTSAnalog To Digital Converter• To study and measure resolution of ADC•To measure the conversion time of the ADC•To study full scale adjustment for unipolar and bipolar signals•To study the working of ADC 17 NETWORK ANALYSIS LAB ( 3RD SEM) 18 To study the series and parallelresonant circuitIndependent Resistors - 3 Nos. ,Independent Capacitors - 3 Nos.,Tapped Inductance. All Inputs/Outputs through 2mm Sockets Set of Patch Chords & User ManualWITH SIGNAL GENERATOR, COUNTER, DIGITAL METERS FOR INPUT & OUTPUT and user manual 19 To test and to measure the cut –off frequencies of the following: —(a) constant k-type low pass filter;(b) constant k-type high pass filterTwo Independent Passive LC Filter Networks (LPF & HPF) All Inputs/Outputs through 2mm SocketsSet of Patch Chords & User Manual 20 To study standing wave pattern for a transmission line of finite length with:(a) open termination,(b) shorted termination andmatched termination. 2.To measure the attenuation constant and phase shift constant for matched terminationTransmission Line Trainer Features:* 30-300 Mhz sweep source with detector* Calibrated attenuator* Displays standing waves/maxima-minima on CRO* Uses actual coaxial lines rather than simulated ones.* Impedance matching.* Measures VSWR, reflection coefficient, characteristic impedance, velocity of propagation, dielectric constant and signal attenuation in TDR.* Measure parameters of 50, 75 and 300 Ohms cables* Study Time Domain Reflectometry.* Study location and nature of discontinuities,Open/short, mismatched terminations, etc.* Offers a complete view of the transmission line in analog and digital domains, which is essential for complete understanding of transmission line behavior.Technical Specifications:A. Frequency Domain AnalyzerFrequency range : 30-300 MHz typical LCD Display. Level : 100mV p-p Attenuator 50 Ohms : 0.5, 1, 2,4, 8,15 dB,Output Impedance : 50 Ohms Scope out : X-Y output to scopeB. Resistive Impedance Analyzer ,Characteristic Imp. : upto 800 ohms ,Display : LCD C. Time Domain ReflectometerPRR Short range : 10MHz typical,Pulse width : <10ns typical, PRR Long range : 100KHz typicalAmplitude : 1V nominal, Output Impedance : 50 OhmsAccessories:Lengths of 50 ohms and 75 ohms coaxial cable, 300ohms, parallel line, lossy line, Tee connectors, ,Standard load of 50and 75 ohms, Various capacitive and inductive loads, shorts, Balun 1:1 & 1:4, Operating manual, Mains cord 21 COMPUTER PROGRAMMING LANGUAGE LABORATORY (3RD SEM) 22 Computer Programming Language LaboratoryTURBO C++ Software 23 MICROPROCESSOR LAB (4TH SEM) 24 8085Microprocessor Trainer KitHigh performance 8085A CPU operating at 3 MHz.16 K powerful monitor FIRMWARE expandable to 32 K. 64 K user RAM. Expanded RAM accessible using bankWrite protect facility for RAM. 3.6 V Ni-Cad battery back up. Versatile Keyboard/Display controller using 8279. 24 highly reliable dual function keys. 6 digit seven segment LED display.Parallel I/O lines available through two 8255 chips. Serial I/O through 8251 USART, with on-board level shifters 1488,1489.Programmable communication parameters. Built-in audio cassette interface.3 channels of 16 bit timer/counters from 8253.Powerful 8085 interrupt capabilities. On-board EPROM programmer with ZIF socket for programming 2716 to7512 EPROMs and various EEPROMs. Normal and intelligent programming modes.On-board ADC,DAC, opto-isolator, reed relay and miniature speaker. On-board logic probe.Single stepping, break pointing and machine cycle single stepping facility. Monitor functions can be called through software interrupts. Large collection of application software provided. All address, data and control lines from the CPU, buffered and brought out on 50 pin connector. Additional Stepper motor of specification:Shaft type: 5 mm DCurrent rating: 1200 mA2Voltage rating: 4 VHolding torque: 44 oz·inSteps per revolution: 200Resistance: 3.3 Ohm2Inductance per phase: 2.8 mHNumber of leads: 6Lead length: 30 cm 25 Microprocessor 8086 Trainer KitINTEL 8086CPU AT 4.77 MHZ CLOCK SPEED,16KB for monitor EPROM upgradable to 64kb16KB RAM expandable to 64KBBattery backup provision for RAM upto 64KB16 x 2 (or) 20 x 4 Alphanumeric LCD display101 keys IBM compatible keyboard24 TTL I/O lines brought out to two nos., of 26 pin FRC connector1 number of standard RS232C compatible serial port brought out to a pin D type male connector.3 channel 16 bit counter/timer using 8253.Fully buffered address data and control signals terminated at a 50 pin header(VXT BUS) for interfacing VBMB seriesof experiment boards and bus expansion.8 no’s of interrupt lines are terminated at a 10 pin connector.Kit operates with a single +5V/DC supplyThe kit and the power supply are mounted on a attractive light gray color fiber glass cabinet with fiber glass top cover.Built-in line assembler & DisassemblerPowerful debugging monitor to develop user program. 26 ELEMENTARY COMMUNICATION ENGG. LAB 27 To study the amplitude modulation and demodulation Ttrainer kit Features of Amplitude Modulation and Demodulation Trainer:On-board message signal with variable Amp/Freq On Board carrier signal with variable Amp/Freq AM Modulation using MC 1496 IC Demodulation using Diode Detector and LPF,6th Order LPF,Op Amp Based Variable AmplifierInternal Power Supply +5V , +12V/ 500 mATechnical Specification :Message Signal:Sine wave Frequency 100 Hz to 2.8 KHz, Amplitude 0 to 3VCarrier Signal: Sine wave Frequency-28 KHz to 108 KHzAmplitude 2V,Modulation : Balanced ModulatorAmplifier : Op Amp BasedDemodulation : Diode Detector & LPFLow Pass Filter : 6th Order LPFSupply Voltage (Board) : +12V, +5V / DCSupply current : 100 mA (Minimum)Input Voltage : 230 V/ 50 Hz ACInterface connectors : 2mm socket 28 AM/FM Radio Receiver kitFrequency range: 400KHz ~ 1.5MHzIntermediate frequency: 455KHzInputs: RF signalOutput IF frequency: 455KHz adjustableIF filter: Dual tune LC, RF amplifier with variable gain ,Mixer (frequency converter),Local oscillator:Output Signal: Sine waveFrequency range: 400KHz ~ 1.5MHz ,Amplitude: Adjustable from 0Vpp ~ 2VppOutput impedance: 50 Ohm ,1st and 2nd IF amplifierCentral frequency: 455KHz, Load impedance: Variable R-L-CGain: 40db with automatic gain control, Diode envelope detectorDetection of the envelop with variable RC filter. Audio output:Amplifier with audio jack, Audio amplifier gain: 26Db, Receiving media :MW coil antennaFM radio receiver, Reception range: 88MHz ~ 108MHz with continuous tuningTuning circuit: Using GANG capacitorIntermediate frequency: 10.7 MHz with ceramic filterEXPERIMENTS:Study of double sideband AM reception using envelope diode detector,Study of single sideband AM reception using product detector,Study of image frequencies,Study of adjustment of receiver tuned circuits,Voice reception using DSB/ SSB AM receiver (super heterodyne receiver)Effects of switch faults FM detection output level: 77.5Vrms (typical)FM detection output distortion factor: 0.3% (typical)Audio amplifier: Gain up to 46DbReceiving media: Adjustable telescopic antennaPower supply: -12V,+12V,+5V,GNDOutput volume regulation, output load impedance of 8 OhmEXPERIMENTS AM radio receiverTo study AM radio receiverTo study of image frequencies for AMFM radio receiverTo study FM radio receiverTo measure the frequency response of Audio amplifier 29 Pulse code Modulation and Demodulation system trainerInbuilt variable DC and 1 kHz AC Modulating Signals, Facility for applying external AC or DC Modulating Signal, Modulating circuit consists of a Positive Clamper, Sample and Hold (S and H), Analog to Digital Converter (ADC), Parallel to Serial Converter and Control Signal Generator, Observation of binary coded analog information by the LED status for both Modulation and Demodulation, PCM Modulation technique using IC, Built-in Pulse Code Demodulation circuit using a Serial to Parallel Converter and Parallel Shift Register DAC, Low Pass Filter for both AC & DC, Observation of Modulated & Demodulated waveform, Provision to monitor output on CRO, Clock to be provided from the Pulse Code Modulator to Demodulator circuit, Built-in IC based DC Regulated Power Supply with indication for power ON & fuse, 4 mm Patch Cords – 4 nos, Supply required 230V, 50 Hz and 1 phase AC, Comprehensive instruction manual complete with theory and operating details. 30 Frequency Modulation andDemodulation kitFM Modulators :Audio Oscillator : Sine wave (10Vpp adjustable) Frequency (300 Hz - 3.4 KHz) FM Modulators : 3 nos. • Reactance Modulator : Carrier Frequency - 455 KHz (± 3KHz) Varactor Modulator : Carrier Frequency - 455 KHz (± 2KHz) VCO Based Modulator : Carrier Frequency - 10 KHz - 200KHz (adjustable) ,Mixer / Amplifier adjustment FM Demodulator:Detuned Resonant DetectorQuadrature DetectorFoster-Seeley DetectorRatio DetectorPhase-Locked Loop Detector (IC HEF4046 based)Phase-Locked Loop Detector (IC LM565 based), Low Pass Filter : 3.4 KHz Cut off Frequency Amplifier (with adjustable gain) 31 DPCM & ADPCM MODULATION / DEMODULATION KITDPCM & ADPCM MODULATION / DEMODULATION KITOn Board Signals:. Frequency: 500KHz, Amplitude: 0 to 4 v pp 32 CONSUMER ELECTRONICS LAB (4TH SEM) 33 Black & White TV Trainer kit with provision of fault findingSystem: CCIR-B, 625 lines, Power supply :230V Ac, 50 Hz, Regulation range170v Ac to 270v Ac.,Power consumption :70 watts,Gain Limited sensitivity:55 dB for Video & 25 dB for AudioSound output :2.0 watts maximum. Screen size :20 Diagonal. Channel :VHF 2 to 12, UHF 21 to 68,S-band and Hyper-band. Isolated shockproof chassis. Sections:Electronic tuner, VideoI.F Section, Sound I.F, Video amplifier, Horizontal oscillator, Horizontal driver and EHT, Verticaloscillator, and output, S.M.P.S power ,Controls: Volume, tone, Brightness, contrast. Distortion :10 to 15% in Live program due to expanded P.C.B. All parts are soldered on Tags on SINGLE PCB of size 19x15” with complete circuit diagramSCREEN PRINTED in different colors with FAULT CREATING FACILITIES to create more than 25 faults. Standard Accessories : 1. Frame with PCB mounting.2. Picture tube fitted in wooden cabinet 3. A Manual having 20 practical. 34 DTH TV and SET TOP BOX TRAINER KITPower supply 230 V ,50 Hz, Input frequency: KU Band, Output frequency: 950-1450 Mhz.Noise temp: 35 degree,DISH ANTENA ,LNBIF FREQUENCY: 70 MHz 35 Colour TV Trainer with provision of fault findingStandard : CCIR-B-PAL-G, 625 Lines Channels : 230, 2 - 4 VHP I (VL), 5 - 12 VHP III (VH), 12 - 100 : BAND IV & V, else : S BAND & HYPER BAND Picture Tube Size : 36 cms. Diagonal RF Input Impedance : 75 W (Ohm) 36 DIGITAL & MICROWAVE COMMUNICATION ENGG. LAB 37 Spectrum AnalyzerFrequency range:9 KHz to 26.5 GHz,Phase noise :-102dBc/Hz, Max third order dynamic range, 1 GHz: 111dB, Displayed average niose level,1GHz:-163dBm,Standard attenuator range/step:50dB/10dB,70dB/10 squaredb,Overall amplitude accuracy:+/- 0.50dB 38 Antenna Trainer 86 - 860 MHZSPECIFICATIONS:Radiation pattern plotting software• Stepper motor controlled receiver stand.Antenna Measurement System:RF Source•Source types :PLL Synthesized with integrated VCO• Frequency range :100MHz to 3GHz• Dynamic range :85dBm• Transmitted power min:-50dBm• Transmitted power max:+5dBm • Impedance :50W / SMA RF Detector• Detector type: logarithmicdetector• Frequency range : 1MHz to 8GHz• Resolution: 0.1dB• Dynamic range : 85dB (±3dB)• Noise level : -90dbm• Impedance: 50W /SMA• Representation of RF level : dBmDisplay•128x64 Graphic LCD Display with backlit. Keypad•15 Key Membrane Keypad for user entry.Stepper motor controller•1.80 Resolutions.List of Standard 22 Antenna Suppliedwith the setupWire Antenna1.Monopole Plane base ground2.Dipole (2nos.) 3.Yagi4.Folded Dipole 5.Vee Dipole6.Rectangular Loop 7.HelicalMicrostrip Antenna 1.Planar Dipole 2.Planar Monopole3.CMSA 4.TMSA5.2X1 ARRAY 6.Annular ring7.Chip Antenna8.RMSA9.RMSA- Circular PolarizedAperture Antenna 1.E- Horn2.Open ended Waveguide Rectangular Array Antenna 1.Broadside Array2.Collinear ArrayReflector Antenna 1. Corner reflectorSOFTWARE• Radiation pattern plotting and analysis software suitable for windows environment Antenna PositionerThe Transmitter and Receiver Antenna stand is made of special material which is inhert to EM frequency and it has engraved height and angle scale on It. It has facility to adjust the height and level. Universal plug and fix Antenna mounts are provided to hold the antenna assembly in vertical and horizontalorientation for co and cross polarization.ACCESSORIES • SMA (M) to SMA (M) 50W flexible cable : 02nos• USB cable ( Male A to Male B): 01no• 3 Pin 6 Amp Power chord: 01no • Manual : 01no • Software on CD: 01no EXPERIMENTS• Measure the variation of field strength /inverse square law• Prove the reciprocity theorem of antenna• Plot Radiation pattern of WIRED Antenna Omni directional antenna• Plot Radiation pattern of all Aperture Antenna• Plot Radiation pattern of all Reflector Antenna• Plot Radiation pattern of all Array Antenna• Measure co-polarization, cross polarization 39 Microwave Test Bench (KLYSTRONBased)Klystron Power Supply: Specifications:Input Voltage -230V+/- 10%, 50Hz AC, Beam supply- Voltage:200-450V continuously variable; Current:Regulation: better than 0.5% for +/-10% variation in mains supply voltage; Ripple: less than 5mV rms ,Repeller Supply -Voltage:-10V to -270V continuously variable with respect to klystron cathodeRegulation: better than 0.25% for +/-10% variation in mains supply volt , Heater Supply - 6.3V DC (regulated)Modulation- Square Wave : Frequency 500Hz to 2000Hz; Max. Amplitude- +110V peak to peak, Amplitude and frequency continuously variable; Sawtooth- Frequency 50Hz to 150Hz; Max. Amplitude- 60V peak to peak, Amplitude and frequency continuously variable.VSWR Meter: (Sensitivity: 0.2 micro Volts at a 200 ohm input impedance for full scale deflection, Noise level: At least 5 dB below full scale at rated sensitivity and maximum, bandwidth with input terminated in 100 ohms and 500 ohms for low and high respectively, A/C output : BNC Connector for amplified output, Frequency : 1000Hz +/- 10%,Power : 230 Volts AC, 50Hz, mains supply) 40 ASK / PSK / FSK Modulation And Demodulation KitFEATURES•VLSI based design •Separate component and operational area •Acrylic cover for component safety •Modular organization of circuit functions •Test points to access signals at every stage of circuit operation •Multimedia based interactive e-manual Data Simulator: Onboard 8-bit variable NRZ-L pattern,Crystal Oscillator: 32.768 MHz,Data Clock: 256 KHz,Data Format: NRZ (L),Onboard Carrier Sine Waves : 1MHz (0°), 1MHz (180°), 500 KHz (0°),Power Supply: +12V, -12V, +5V, GND. 41 Microwave Test Bench (GUNN Based)Gunn microwave test bench:Gunn Power Supply (0 - 12 Volts variable,1 Amp. Max,Modulation Frequency: 1KHz +/- 10% (900-1100 Hz),Output Connector: BNC(F) for Gunn Oscillator & TNC(F) for Pin Modulator,Modulation: Square Wave, Frequency : 500Hz to 2000Hz)• Gunn Oscillator • Isolator• PIN modulator• Variable attenuator • Detector Mount• SWR meter(Sensitivity: 0.2 micro Volts at a 200 ohm input impedance for full scale deflection, Noise level: At least 5 dB below full scale at rated sensitivity and maximum, bandwidth with input terminated in 100 ohms and 500 ohms for low and high respectively, A/C output : BNC Connector for amplified output, Frequency : 1000Hz +/- 10%,Powe : 230 Volts AC, 50Hz, mains supply) 42 1 GHz spectrum Analyser1 GHz spectrum Analyser with tracking generatorFrequency range: 150 KHz to 1000 MHzFreqency Resolution: 1 KHz CF entry 40 Hz sweep resolution at 2 KHz per Division,Frequency Display: 61/2 digitFrqency Control: Digital Phase LockResolution Bandwidth: 3 KHz, 30 KHz, 220 KHz, 4 MHz. 43 INDUSTRIAL ELECTRONICS LAB -I (5TH SEM) 44 Trainer Kit to study Reverse Recovery Characteristics of Power DiodesThe single Board trainer Kit should contain IC Regulated Power Supply, Different types power diodes, Digital Ammeter and Voltmeter and other necessary passive components 45 To study drive circuit of SCRIsolated 230 V/40 W AC Power Supply1.2 V to + 15 V/500 mA DC Power Supply* 0-18 V/500 mA,50 Hz, AC Power Supply* Variable frequency triggering pulses* DC Gate signal control, Pulse gate signal * Synchronous AC gate control signal through DIAC* UJT Triggering* 10:1 On- board resistive attenuator * Provision for 40 W Lamp Load* Set of Patch Chords & userManual. 46 To study a single phase rectifier—output waveform with phase control circuitTrainer Kit to study Single Phase Full wave Bridge Rectifier for fixedDC output, Half Controlled and fully controlled rectification facilities with R and RL, loads 1000 Ohms 10 Watts, 14 ma @ 0.05 A inductive loads.The Single Board Trainer Kit contains :(i) Source for rectification of 4 to 24 V DC fixed and variable output @ a max of 500 ma helps to construct and study Series and Parallel resonance Circuit.(ii) Four Diodes and 4 SCRs in bridge configuration with gradual firing controls and necessary capacitive, inductive and Pie filter components.(iii) Digital Ammeter and Voltmeter. 47 To study a polyphase rectifierIsolated 230 V/40 W AC Power Supply Isolated stepped down 3 PH supply. * 3 Phase diode rectifier in open condition*Provision for Load& CRO output.* Electronic phase sequence finder.*Set of Patch Chords & user Manual 48 INDUSTRIAL ELECTRONICS LAB-II (6TH SEM) 49 Servo Regulator Stabilizer Study Kit500VA Servo stabilizer , 2 Amp Variac, Digital input & output meters, Lamp load, Set of Patch Chords & userManual. 50 To study a Jones chopperIsolated 230 V/40 W DC Power Supply, + 5 V/500 mA DC Power Supply* SCR Jones chopper* Gate firing pulses for Jones Chopper* 10:1 On-board Resistive Attenuator* Provision for 40 W Lamp Load* Set of Patch Chords & userManual. 51 To study speed control of induction motor by voltage and frequency variationV/F CONTROLLER 1 HP, AC SQ. CAGE IND. MOTOR 1 HP,DIGITAL VOLT & AMMETER. 1 PHASE I/P & 3 PHASE O/P,3 PH & 1PH MCB PROTECTION 52 To study the speed control of DC motor by:(a) varying field current keeping armature voltage constant; and,(b) varying armature voltage keeping field current constant DC SHUNT MOTOR (FULL COPPER WINDING) .5 HP WITH BASE MOUNT FRAME 1 No VARIAC CONTROLLED 2 DC POWER SUPPLY ( 1 FOR FIELD & 1 FOR ARMATURE)DC VOLT & AMMETER DIGITAL………4 NosPANEL MOUNTED RPM METER………1 No.WHITE BAKELITE FRONT WITH CONN. DIAGRAM & WOODEN SAFETY BOX.METAL FRAME TABLE (Ply board with sun mica) CUM STAND FOR PANEL 53 Power Electronics Devices Trainer KitShould have Built in power supplyDC supply : +/- 12V, 500mA,Power supply 17V / 750mA,Regulated 13.5V/3A O/P mustbe provided as 12V Battery charging supply. Isolated DC supply +12V/ 300mA with isolated common.On board Inverter transformer of Primary : 230V & Secondaries 12-11-0-11-12/3AOn board Lamp load of 15W (100W) should be provided.AC supply : 230V AC line voltage must be made available on two banana 4mm socketsMust have Two pulse transformers of 1:1:1 are provided for isolation & supplying firing pulsesalong with required DC Power supply to experiment panel under test through 15 pin female ‘D’connector.R-L-C Load PanelMust have Load resistor of 10W / 40W --- 1no.Must have Centre tapped 3A choke 4mH/ 16mH each ----2nos.Must have Commutation capacitors of 10mF/100V -------4nos.Must have AC Paper capacitor of 4mF/440V ---1no. 54 PLC Trainer (EXPERIMENT 1-Use of simulation package for different function of PLC. EXPERIMENT 2- Verify function of logic gates by using PLC. EXPERIMENT 3- Write and verify ladder program for motor ON-OFF Control with two push button)HARDWARE SPECIFICATION:TTL Input Switches : 8 Nos,TTL Momentary Switches : 8 Nos., Proximity Switch : 1 No.,Optical Transducer (two state) : 1 No., Programmable LEDs : 8 Nos., Analog input 0 to 5V DC : 8 channels, Analog output 0 to 5V DC : 1 No., 4 to 20mA Transmitter : 1No., 4 to 20mA Receiver : 1No., Current Meter : 25mA FSD 1No.,Voltmeter : 10V FSD 1 No., Piezo Electric Alarm : 1 bit.Built-in power supply.Dedicated I/O interface card suitable for IBM computer suitable for ISA slot. SOFTWARE SPECIFICATION:This is a GUI based LADDER LOGIC SOFTWAREDRAG AND DROP (D&D) an instruction instead of typing an instruction. This eliminates errors in typing. All the instructions are displayed ON-SCREEN during Design time. Each and every element is directly addressed with their NAMES not by numbers or codes, which are very difficult to remember. Ex: At design time, you call a SWITCH#0 in your Ladder program by D&D the component called SWITCH#0, and that’s it, not by typing a few digits numbers or codes.Appropriate LIST boxes (input, output) open as you D&D an instruction in LADDER WORKSPACE.Ladder workspace is 24X100 instruction CELLs are available for your use.TOOL TIP features are available at the end of each instruction prompting you “what to do next”Very user friendly.Extensive ON-LINE HELP menu available.GUI based STATUS of the entire PLC is displayed during RUN TIME.Programs are saved, retrieved, edited by simply clicking on Menu list box.Extensive EDIT features are available. 55 Power Electronics Development TrainerSize of Breadboard : 172.5 mm × 128.5mmDC Power Supply :+5 V, -5 V 500 mA,+12V, -12 V 500 mA+15 V, 250 mA+35V, -35V, 250 mAAC Power Supply :18V-0V-18V ,0V-15VOn board Firing CircuitsFrequency range : 30Hz to 900Hz variableAmplitude : 12VPWM control of G1, G2, G3 and G4Duty cycle control of “Gate”Signal is 0 to 100%SCR Assembly : 4 SCRs 2P4M, 400V/2APower Devices : IGBT-G4BC20S, MOSFETIRFZ44N,UJT-2N2646, DIACDB3,TRIAC-BT136, PUT-2N6027Circuit Components on board : Electrolytic Capacitor 10µF, 63V,Electrolytic Capacitor 1µF, 63V ,Met. Capacitor 0.33µF, 63V ,Diode 1N4007, Inductor 220uH, 4.7µH, 10mH.Pulse transformer on board :2 nos. PT4502 1:1 and one is PT4503 1:1:1Load selector : 6 load resistances- 47E/7W,1K/1W, 1K/10W, 10K/10W,120E/5W, 2K2/2W.Test points : 10 nos (Gold plated)Power Supply (Mains) : 220V/110V, 50Hz/60HzIncluded Accessories :Bread boards : 2 nos.Connecting wires : 20 nos.2mm to 1mm Patch cords : 15 nos.2mm Patch cords (Red) 16” : 4 nos.2mm Patch cords (Black)16’’ : 4 nos.2mm Patch cords (Blue) 16’’ : 12 nos.Mains cord : 1 no.with i) Power Semiconductor Application Experiment Panel ii)CON / INV Panel iii)Triggering circuit / dv/dt Protection panel 56 ELECTRICAL & ELECTRONICS MEASUREMENT LAB (6TH SEM) 57 Digital LCR meterVariable measured- L,C,R and loss angle (D factor ) Measured frequencies: 1 KHz, 100KHzDisplay: 3⅟₂ digit , Resistance: 0 to 20 MΩ, 0.1 Ω , Capacitance: 0 to 20000μF, 0.1 pF Inductance: 0 to 20000 H, 0.1μH ,D factor: 0.01 to 8.0 with 1% error 58 Distortion Factor MeterFrequency : 20 Hz to 200KHz Distortion:0.1% to 100% f.s.d. in steps ,Input sensitivity: 100mV (r.m.s.), Input impedance: 1MΩ/160pF, Voltmeter range: 300μv to 300v f.s.d. in 13 range 59 To measure L & Q by Maxwell methodFULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER & CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., DECADE INDUCTANCE WITH ROTARY SWITCH INBUILT, BACKLIGHT LED & WOODEN HARD BOX 60 To measure the unknown capacitance by Schering bridgeFULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER & CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., DECADE INDUCTANCE WITH ROTARY SWITCH INBUILT, BACKLIGHT LED & WOODEN HARD BOX 61 To measure the unknown frequency by Wein BridgeFULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER WITH FREQ. COUNTER & CRO SIG. O/P INBUILT& CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., BACKLIGHT LED & WOODEN HARD BOX 62 MICROCONTROLLER AND EMBEDDED LAB (5TH SEM) 63 Microcontroller Trainer Kit 1.Write a Simple Assembly Programs fora. Addition b. Subtraction b. Multiplication d. Division2. Write a Programs for (any two of the following)i. 4 x 4 Matrix Keypad Interfaceii. character based LCD Interfaceiii. Analog to Digital Conversion (On chip ADC)iv. Serial EEPROMv. Seven Segment LED Display Interfacevi. Interfacing With Temperature Sensorvii. Stepper Motor Interface8 BIT EMBEDDED MICROCONTROLLER TRAINERFEATURES•Single board design with various resources•Excellent training platform for embedded applications•Software development tools include assembler and ‘C’ compiler•Easy adaptability to different versions of microcontroller in the same family SPECIFICATIONS•Experimental board for 40 pin MCS51 and AVR family of microcontrollers•In-system programming (ISP) facility for many microcontrollers•Double RESET signal with manual key•Crystal frequency: 11.0592MHz•On-board RS232 compatible serial interface terminated in a 9 Pin D female connector•4×4 matrix keyboard•16×2 alphanumeric LCD connector (4-bit interface) and trimmer for contrast adjustment•Four 7-segment LED displays•I2C EEPROM (24Cxx)•Real time clock (DS1307) with lithium battery and SRAM•8-high current output port (500mA) for driving external loads•Two 12V sugar cube relays•Continuous tone piezo buzzer•Temperature sensor socket with thermostat functions•Four 8-bit A/D converter, one 8-bit D/A converter provided by PCF8591•All port-pins available on 10-pin box header•8 LEDs for easy logic state monitoring•8 input trigger switches using 8 push buttons•ISP programming with Flash ISP for AT89S51/52/8252/AVR•Infrared remote control receiver module IC supported•P89V51RD2BN•AT89S52 Installable software on CD•Programmers notepad : Free, open source, text editor•Flash ISP programmer software for 89SXX•Bascom basic compiler (demo version)•MIDE-51: An IDE for MCS-51 microcontroller•WinAVR : open source C compiler for AVR•Sample programs for peripherals DC 12V/500mA output power supplyEXPERIMENTS• Study of LED blink• Study of dancing light• Study of LCD display• Study of LCD-keyboard display• Study of 7 –segment display• Study of RC5 remote control test program• Study of analog to digital converter• Study of real time clock (RTC) 64 ADVANCE COMMUNICATION ENGINEERING LAB 65 To be familiar with the following network components:THIS WILL BE A FULL PACKAGE OF THE FOLLOWINGS:-** RJ5/CAT5CABLES 100 METERSRJ 45CONNECTORS 100 PCSCUTTER & CRIMPING TOOLS FOR RJ45/CAT-5CABLESCABLE TESTER/TRACKER…….. 4 PCSHUBS WITH ACCESSORIES & TOOL KIT NETWORK INTERFACE DIFFERENT CARD 66 COMPUTER NETWORK LAB 67 Network ComponentsCAT 5/5E/6 cable :100mtrs (Rs 2000/-), RJ 45 Connectors: 200pcs (Rs. 500/- )RJ 45 Crimping Tools: 05(Rs. 800/- each)LAN Cable Tester (RJ 45): 05 (Rs 1000/- each) 68 24 Port managed switchNo. of Ports: 10/100 Mbps 24 Ethernet ports, Switch Fabric: 32 Gbps, Form Factor: Rack Mountable,OS: LAN base Image, Console port: Availavble for configuration, Mac Address table: 4000 or higher, VLAN: Supported, MTU: 9100 with support for jumbo frames, Warranty: 3 years onsite comprehensive warranty including parts and labor plus onsite technical support with 24x7 69 24 Port Unmanaged switch24-port 10/100/1000Mbps Ethernet switch Wifi Router: 300 Mbps wireless router with 4 LAN ports and 1 WAN port 70 8 port HubExternal Power Supply, 8 Nos RJ-45 connectors for 10BASE-T/100BASE-TX,Ethernet Ports 8-Port, Capacity 1.6 Gbps, Wireless Speed 10 / 100 Mbps 71 Access points54 Mbps Access point for wifi network: No.of Channel: Dual channel for support upto 108 Mbps ( 2x54Mbps), Backbone connectivity: connect over Fast Ethernet through backbone switches, Security: Security enabled Wifi connectivity with option for Broadcast of SSID,Network:802.11 a/b/g/n network support, PoE: PoE enabled, Form factor: Wall or ceilling mountable with physical lock suppor. Warranty and support: 3 years on site comprehensive warranty including parts and labour plus on site technical support with 24 X 7 72 LAN TrainerEthernet (IEEE 802.3 wireless LAN (802.11),Token bus ( 802.4) Token ring ( 802.5), Data rate : 10/100 Mbps for ethernet, 1, 2, 5.5, 11 Mbps for wirless & LAN as per IEEE 802.11b, connectivity through RJ 45 connector. 73 Installation & commissioning of network(i) Laying ofOFC & CAT 6 Cable (ii) splicing (iii) Installation & network testing 74 INSTRUMENTATION AND CONTROL LAB (6th sem) 75 To measure displacement with LVDT ACTUAL LVDT WITHINSTRUMENTATION AMPLIFIERDC O/P WITH DIGITAL METER, 3and 1/2 digit LED display with polarity indicator, sensitivity of 10mV/mm in the range of 10mm. 76 To measure temperature with thermocoupleTHERMOCOUPLE SENSOR IN STEEL CASEELECTRIC WATER JAG.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER 77 To measure temperature with thermistorTHERMOCOUPLE SENSOR IN STEEL CASEELECTRIC WATER JAG.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER 78 To measure pressure with strain gauge STRAIN GAUGE SENSOR WITH WAIGHT LOADING SYSYTEM SAMPLE WEIGHTS.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR 79 To plot the Characteristics of RTD (PT-100)RTD 3 WAIR SENSOR IN STEEL CASEELECTRIC WATER JAG.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER 80 Temperature controller with on-off controller, Temperature controller with PI controller, Temperature controller with PID controllerTemperature controller with facilities for P, I, D and relay control blocks, Operating temperature: Ambient to 90°C, Separate controls for P, I, D channel gains,Two settings for relay hysteresis, Fast 25W oven fitted with IC temperature sensor, Forced cooling option to ready oven for next experiment, Digital display of set and measured temperature on a 3½ digit built-in DVM, 0-9999 sec, timer on panel for a convenient temperature response experiment, Buffered output for recorder 81 CIRCUIT THEORY LAB 82 Determine the permeability of magnetic material by plotting its B-H curveHysteresis Loop Tracer/ BH Curve apparatus220volt AC, 50Hz supply 83 Series parallel resonance of R-L-C cktKit for Series parallel resonance of R-L-C ckt: The Set-up consist of Power supply (with variable frequency), audio oscillator with digital readout, digital RMS meters and different number of inductors (smoothly variable), capacitors, Rheostat, patch cord & manual. 84 SWITCH GEAR LAB 85 Speed control of Induction motor 1ph by using SCR3Φ, 400V ac, 50HZ.,1HP, 1440 rpm. Speed control using ac back to back configuration of SCRs and to note Speed vs. Load Characteristics at open loop condition. This unit should consist of AC 3Φ Induction Motor (1HP) coupled with a (i) DC Shunt Generator (1HP) for loading and (ii) a DC Tachogenerator to be used for speed feedback control. A DC meter must be provided for displaying the speed of the motor from the Tachogenerator with suitable AC Ammeter and Voltmeter for the measurement (AE Make Panel Type or digital) Sheet Metal enclosure with powder coating paint must be provided. (with foundation & Experiment Table) 86 C.T. & P.T. testing trainer kit C.T. & P.T.testing trainer kit - Variable AC voltage source (0-220V)& variable AC current source (0-25A), CT for 25/5A, PT for 220/110V, Autotransformer for voltage & current adjustment, MCB protection, To determine Ratio error, Phase angle error of CT & PT, with Burden box. , polarity check indicator , range selector switch. 87 Induction type electromagnetic relay* Over Current (IDMTL Electro- Mechanical Type , Model CDG-11 or equivalent) Relay,*PSM, TSM setting* Auxiliary Relay,* Counter /Timer,* D.W. Transformer, * Variac,* Knife Switch,* DC power supply for DC auxiliary relay and the relay,* Portable Ammeter.Necessary panel for the complete set up with wooden (teak wood) table (4x3x2.5) 88 Air Circuit BreakerCut section model 89 Transmission line protection simulation KitOver Current, Earth Fault, Over Voltage, Under Voltage, Directional, Differential, Distance protection 90 POWER PLANT LAB 91 Diesel generator power plantmodel of small diesel generator power plant 92 Hydro power plantmodel of micro Hydro power plant 93 Horizontal axis small wind turbinemodel 94 CSP plantmodel 95 MEASUREMENT LAB 96 Kelvin double bridgeCompletely self contained, stand alone unit with built in power supply, required meters, Standard Resistance, wooden bench, high sensitivity spot light type galvanometer, connecting patch chords and operating manuals. 97 RENEWABLE ENERGY LAB 98 Renewable Energy Labsolar PV plant- Model 99 Renewable Energy Labvertical axis small wind turbine- Model 100 ELECTRIC MACHINE LAB 101 VoltmeterVoltmeter (M.I type) 0-150V/300V/500V 102 VoltmeterVoltmeter (M.I type) 0-20V/50V 103 AmmeterAmmeter (M.I type) 0-5A/10A/20A 104 AmmeterAmmeter (M.I type) 0-1A/2A/5A 105 MultimeterAnalog Multi-meter of ISI marked: DC : 0-200 mV/ 1000 V & 0- 2mA – 10 A,AC : 0 – 200mV/1000V &0-2 mA – 20 A, Resistance : 0 – 200 Megaohm, with shock proof protection & other facilities and operatingmanuals. 106 MultimeterDigital Multi-meter of ISI marked: DC : 0-200 mV – 1000 V & 0-2mA – 10 A,AC : 0 – 1000 V & 0- 2mA– 20 A, Resistance : 0 – 200 Megaohm, with diodetesting, data hold, shock proof protection , auto power off etcfacilities and operating manuals. 107 WattmeterDynamometer Wattmeterof ISI marked : Low Power Factor ( 0.2 ) : Current Rating : 5/10 A , Voltage Rating : 150/300 / 600 V , with anti-parallax mirror , 120 mm scale length , knife edge pointer, mouldedBakelite body, portable. 108 VoltmeterVoltmeter (PMMC type) 0-150V/300V 109 AmmeterAmmeter (PMMC type) 0-2A/5A 110 StarterDC 3-point Starter : 220 V DC , 15 A 111 StarterDC 4-point Starter : 220 V DC , 15 A 112 DC Power SupplyDC Power Supply : Input : 415V, #-Phase AC, 50 Hz;Output : 220V DC , 5 KW of a standard make . 113 RheostatRheostat with sliding Jockey : 100 Ohm , 5 A 114 RheostatRheostat with sliding Jockey : 500 Ohm , 5 A 115 Digital Energy MeterDigital Energy Meter of ISI marked: Three Phase AC , 440 V , Maximum 30 A, 50 Hz with operatingmanual. 116 Digital MeggerDigital Megger for measuring insulation resistance of ISI marked: 250 / 500 V, Maximum 200 Mega ohmwith operating manual 117 VariacSingle Phase Variac of ISI marked : Input:– 230 V AC, Output : 0 – 270 V AC , 1 KVA, 50 Hzof a standard make 118 VariacThree Phase Variac of ISI marked : Input:– 415 V AC, Output : 0 – 500 V AC , 3 KVA, 50 Hzof a standard make 119 Clamp on MeterClamp on Meter of ISI marked : Digital type : For measuring Voltage ( AC/DC ), Current ( AC/DC ) , resistance, Power & Power Factor with operating manuals 120 Phase Sequence IndicatorPhase Sequence Indicator of ISI marked : 50 – 500 V AC, 25 – 60 Hz 121 Frequency MeterFrequency Meter of ISI marked: Digital Type : 240 V, 47 – 99 Hz 122 TransformerSingle-Phase Transformer : 1 KVA , 230 V/115V , 50 Hz( Air Cooled) 123 TransformerThree-Phase Transformer : 3 KVA , 415/230 V , 50 Hz 124 3-Ph Resistive LoadThree phase resistive load : 400 V , 6 KW 125 3-Ph Inductive LoadThree phase inductive load : 400 V , 3 KW 126 3-Ph Capacitive LoadThree phase capacitive load : 400 V , 3 KW 127 3-Ph StarterStar Delta automatic starter for 3 Phase,400 V, 5 Hpmotor 128 3-Ph DOL StarterDOL & Auto -Transformer Starter : 3-phase AC , 400V, 10A, 50 Hz 129 StroboscopeDigital Stroboscope - 10,000 rpm 130 DCGenerator Voltage build UPSupply, Installation , Commissioning & Testing with suitable ISI markedammeter, voltmeter, starter, rheostat , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :For Building up Voltage in DC Generator ( Open Circuit / Saturation Characteristics: DC Shunt Motor of ISI marked : 2HP or 5HP, 220 V. Machines will have to be set on M.S.Channel base with suitable footing/fixtures and screws etc. and operating manual isalso must.(with foundation & Experiment Table) 131 Brake test in DC Series Motor Supply, Installation , Commissioning & Testing with suitable ISI markedammeter, voltmeter, starter, rheostat , digital tachometer , Spring balance & loadings, protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :For Brake test in DC Series Motor& load Characteristics: DC Series Motor of ISI marked : 2HP, 220 V.Machineswill have to be set on M.S.Channel base with suitable footing/ fixtures and screws etc. and operatingmanual is also must.(with foundation & Experiment Table) 132 Speed Controlof 3-Phase Squirrel cage Induction motorSupply, Installation , Commissioning & Testing with necessary & suitable ISI marked meters such as ammeter, voltmeter, frequency meter , starter, protective devices and all other accessories mounted on a standing panel board as per following specification :For Speed Controlof 3-Phase Squirrel cage Induction motorby – (i) volt /freq control method : Three phase Squirrel cage induction motor : 2HP, 400V with v/f controller.Machineswill have to be set on M.S.Channel base with suitablefooting/fixturesandscrewsetc.includingtheoperating manual.(with foundation & Experiment Table) 133 Load Test of an Alternator & % regulation at various loads with Unity Power factorSupply, Installation , Commissioning & Testing with suitable ISI marked ammeter, voltmeter, starter, star connected load , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :For Load Test of an Alternator and Determination of%-age regulation at various loads with unity power factor : DC Shunt Motor of ISI marked : 3HP, 220 V , AlternatorISI marked: 2 KVA, 415 V , 50 Hz.Machineswill have to be set on M.S.Channel base with suitable footing/fixtures and screws etc. and andoperating manual is also must.(with foundation & Experiment Table) 134 Measurement of Slip of 3-Phase induction motorSupply, Installation , Commissioning & Testing with suitable ISI marked meters such as ammeter, voltmeter, frequency meter, stroboscope etc , starter , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :Measurement of Slip of 3-Phase induction motor by –(i) Stroboscopic& (ii ) Tachometer methods and reversing the direction of rotation of the motor : Three phase squirrel cage induction motor of ISI marked: 2 HP , 415 V , 50 Hz .Machineswill have to be set on M.S.Channel base withsuitable footing/fixtures and screws etc. and and operating manual is also must.(with foundation & Experiment Table) 135 Synchronization of two 3-Phase alternatorsSupply, Installation , Commissioning & Testing with suitable ISI marked meters such as ammeter, voltmeter, frequency meter etc , starter , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification : Synchronization of 3-Phase alternator ( 2 SETS ) by– (a) Three Lamp & (b) Synchroscope Methods : DC Shunt Motors of ISI marked : 5HP, 220 V ,Alternators of ISI marked: 3 KVA, 400 V, 50 Hz.Machineswill have to be set on M.S.Channel base withsuitable footings/fixtures and screws etc. and and operating manual is also must.(with foundation & Experiment Table) 136 POWER SYSTEM LAB 137 KIT FOR STUDY OF ACTIVE & REACTIVE POWERWITH SIMULATIOL KIT & LAPTOPStudy of Active & Reactive power with simulator Kit and Laptop with appropriate software, The kit should consist of variable Inductive & Capacitive load to observe change in active & Reactive power 138 MODEL OF VARIOUS TYPES OF TURBINES USED IN POWER GENERATING STATIONSModel Piece of each type of Turbine 139 PYRANOMETERMEASUREMENT OF SOLAR RADIATION BY PYRANOMETER 140 PHOTO VOLATIC SYSTEM USED IN STREET LIGHTWITH SOLAR PLATE,PV CELL,BATTERY,CHARGER 141 STUDY OF POWER SYSTEM OF 6.6 KV/400 V SUBSTATION USED FOR A HOUSING CONPLEXMODEL 142 D.C NETWORK ANALYSERD.C NETWORK ANALYSER FOR STUDY OF DIFFERENT TYPES OF FAULTS 143 DIFFERENT TYPE OF EXCITATIONS SYSTEM USED IN ALTERNATORSTATIC EXCITER,SHAFT MOUNTED,ROTATNG TYPE EXCITER & Brushless exciter ( Model only) 144 MISCELLANEOUS 145 MOTOR-ALTERNATOR SET FOR SYNCHRONISATION OF TWO ALTERNATOR WITH SYCHRONISING PANEL INCLUDING CHECK SYNCHROSCOPE & BULB ARRANGEMENT TO PERFORM TWO BRIGHT ONE DARK LAMP METHOD1.TWO SET OF D.C MOTOR 2.5 KW,230 VOLT,3000 R.P.M WITH SPEED CONTROL ARRANGEMENT 2. TWO SET OF 1 KVA,3 PHASE,440 VOLT,3000 R.P.M ALTERNATOR WITH BASE MOUNTING & EXCITATION SYSTEM. 146 PlierPlier of good quality 147 TesterTester Screwdriver of reputed brand 148 Screwdriver setScrewdriver set of reputed brand

Contract Date: Mar 12, 2026 Contract Value : ₹ 33.87 Lakh

Government Departments No of Bidders 9

West Bengal View Result →

Home Affairs #9806167 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 12

West Bengal View Result →

Educational and Research Institute #9534195 AOC

Contract Date: Feb 17, 2026 Contract Value : ₹ 5.63 Lakh

Local Bodies No of Bidders 6

West Bengal View Result →

Educational and Research Institute #9426408 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 33

Puducherry View Result →

Educational and Research Institute #9407553 AOC

Contract Date: Feb 06, 2026 Contract Value : ₹ 70

Boards / Undertakings / PSU No of Bidders 32

Madhya Pradesh View Result →

10.

Public Administrative Department #9243419 AOC

Contract Date: Jun 22, 2026 Contract Value : ₹ 1.05 Crore

Government Departments No of Bidders 15

Maharashtra View Result →

11.

Rural Development #8523125 AOC

Contract Date: Dec 31, 2025 Contract Value : ₹ 1.57 Crore

Government Departments No of Bidders 3

Maharashtra View Result →

12.

Health and Family Welfare #8001843 AOC

Contract Date: Sep 16, 2025 Contract Value : ₹ 27.50 Crore

Government Departments No of Bidders 85

Puducherry View Result →

13.

Health and Family Welfare #7349573 AOC

E-Tender For Procurement Of Consumable Items For Two Years From The Date Of Award Of Contract (Aoc) , Accessories Of Nerve Stimulator (To Use In O.T) Cerebral Stimulator –Nerve Stimulator – Alkaline Battery. , Antimicrobial Double-Lumen Polyurethane Catheter For Haemodialysis Fully Radiopaque Catheter Introduced By The Seldinger Technique. Flexible Fixation Wings And Polyurethane Extension Tubes With Clamp. Centimetre Graduations From 9Cm From Distal Tip. The Active Ingredient Used In The Expert Technology Is The Silver Ion-Based Antimictobial Agent Agion Which Is Incorporated Into The Polyurethane Tubing Of The Catheter. , Arterial Filter (Pediatric): Polycarbonate , Polyester Screen Type, Filterpore Size 32Um , Vent Port - Female Luer Port , Priming Volume - 40Ml,Max.Blood Flow Rate 2.5L Per Min. , Arterial Lines : Polyethylene Arterial Lines (Single Lumen 20G - Length-10Cm/8Cm/6Cm/4Cm) With Seldinger Technique , Bileaflet Mechanical Prosthetic Aortic Valve With Elevated Pivot Guards * Bileaflet & Rotatable* Opening Angle Of 850 And Traveling Arc Of 560.* Disc Made Of Pyroletic Carbon / Graphite Substrate.* Sewing Ring: Made Of Polyester With Markers For Helping In Suturing.* Vertical Leaflet Exposure = 3.4 Mm For Better Ostia Clearance* Posterior Wall Clearance= 6.6 Mm In Both Anotomical And Anti- Anotomical Positions. * Aortic Assorted Sizes. , Bileaflet Mechanical Prosthetic Mitral Valve With Elevated Pivot Guards * Bileaflet & Rotatable* Opening Angle Of 850 And Traveling Arc Of 560.* Disc Made Of Pyroletic Carbon / Graphite Substrate.* Sewing Ring: Made Of Polyester With Markers For Helping In Suturing.* Vertical Leaflet Exposure = 3.4 Mm For Better Ostia Clearance* Posterior Wall Clearance= 6.6 Mm In Both Anotomical And Anti- Anotomical Positions. * Mitral Assorted Sizes. , Blood Gas Analyser/Bed Side Blood Gas-Analyser/Acid Base Lab Specification:- Portable Clinical Analyser With Recorder, Printer And Different Cartiledge For Estimating Blood Gas, Electrolyte3s, Haematocrit, Hemoglobin, Blood Glucose Etc , Blood Tubing And Avf Needles , Boving Tissue Engineered Acellular Pericardial Patch , Box For 25 Glass Slides (Plastic Made) , Cannula, Femoral Venous Cannula : Kink Resistance Thin Wall, Radio Opaque Bodies With Multiple Side Holes. Depth Markings Permit Precise Positioning Of The Cannula With A Tapered Tip Dilator Which Facilitates Insertion Over 0.038 In. ( 0.1 Cm ) Guide Wire. Size : Assorted, 21 In. (53.3 Cm) Overall Length 25.5 In. (64.8 Cm) Over All Length. , Cannula, Single Stage Venous Cannula, Malleable, Wire Reinforced Adult With Multiport And Different Types Of Tips , Catheter, Balloon Coronary Angioplasty Catheter Post-Dilation Distal Tip - Small Entry Profile < 0.44Mm And Small Balloon Profile Of < 0.035 Triple Layer Balloon With Large Pressure Working Range From 12Atm (Np) To 22Atm (Rbp). Hydrophilic Coating Of Shaft. Size: Balloon Length Starts From 6Mm Diameter From 2.00 Mm To 5 Mm And Above , Catheter, Balloon Coronary Angioplasty Catheter Pre-Dilation Tip-Small Entry Profile < 0.42Mm. Shaft Proximal 1.9 Fr & Distal 2.6 Fr. Hydrophilic Coating Of Core Wire Shaft. Rbp Upto 14 Atm. Size: 1.00 Mm To 4 Mm Diameter. , Closed Intra -Venous And Intra-Arterial Blood Sampling System, Along With Two Pressure Transducer With Flush Device & Vent Stopcock, Iv Set ,2 Shutoff Valve, 87” Patient Pressure Tubing Along With Inbuilt Inline 12 Cc Reservoir & 2 Self-Sealing Z-Site For Closed Blood Sampling Port, Pole Mountable , Coronary Angioplasty Guide (Ptca) Wire Subcategories: Floppy /Extra-Floppy/Intermediate/Hydrophilic. , Coronary Angioplasty Guide Wire (Micro Wire With Catheter) , Corrugated Rubber Sheath Drain , Cvc 4 Fr. With Anti Kinking Nitnol Guide Wire(Paediatric)- 20G/23G/23G , 6Cm/8Cm/10Cm * 4.5Fr. Thermosensitive Polyurethane Triple Lumen Paediatric Cvc. * It Has Anti Kinking Nitnol Guide Wire , Cvc 5.5 Fr. With Anti Kinking Nitnol Guide Wire(Paediatric)- 8 Cm / 12.5 Cm * 5.5Fr. Thermosensitive Polyurethane Triple Lumen Paediatric Cvc. * It Has Anti Kinking Nitnol Guide Wire , Denham Pin , Disposable Ventilator Heated Wire Circuit With Water Chamber. Should Be Tidel Volume Range From 200 Ml To 1500 Ml. Should Be Minimal Deade Space 55 Ml. Medical Grade Pe. Connector 15/22 Mm M/F For Y Piece, Connector 15/22 Mm M/F For Ett & Mask. Standard Length . 6Ft. Or Expandable Length. , Distractor 6, 8 & 10 , Drill Bit (S.S) Sizes : 2 Mm, 2.7 Mm, 3.5Mm, 4.5 Mm , Et Connector With Catheter Mount: Connector With Bronchoscopy Port For Endotracheal Tube / Tracheostomy Tube , Foreign Body Hook(Ent) , Hemoconcentrator Adult * Polyurethane Membrane Material Achieves High Ultrafiltration Rate For Efficient Blood Concentration In A Short Time, While Restriciting Removal Of Albumin , Which Is Vital To The Humen Body.* Effective Surface Area - Approx1.1 M2* Priming Volume - 70 Ml* Blood Ports - 1/4 Slip / Luer Locks* Filtrate Port - 1/2 (1/4 Adapter)* Blood Flow Range - Min. 100 - Max. 500 Ml/Min. , Hemoconcentrator Paediatric * Polyurethane Membrane Material Achieves High Ultrafiltration Rate For Efficient Blood Concentration In A Short Time, While Restriciting Removal Of Albumin , Which Is Vital To The Humen Body.* Effective Surface Area - Approx 0.5 M2* Priming Volume - 35 Ml* Blood Ports - 1/4 Slip / Luer Locks* Filtrate Port - 1/2 (1/4 Adapter)* Blood Flow Range - Min. 100 - Max. 500 Ml/Min. , High Pressure Extention Line 120Cm Male/Female For Drug Eluting Stent , Hydrophilic Guide Wire • Wire Should Be Nitinol Core With Hydrophilic Coated. • Length Should Be Standard -150Cm.• Tip Should Be Available Straight & “J”, Dia-0.18” To 0.038”. , Infusion Pump For Sustained And Slow Injection Of Drugs, Front Loading Syringe (Upto 50Ml), 4 Step Programming Sequence, Programable Infusion Rate 0.1 Ml/Hr To 1200 Ml/Hr (Bolus Rate Upto 1200 Ml/Hr), Audio Visual Alarm: Battery Low, Battery Empty, Occulusion, Syringe Near Empty, Syringe Error, Not Infusing, Different Buttons For Turning On Syringe Pump And Starting Infusing, 3 Occlusion Pressure Settings: Low(L): 300Mmhg +/- 100Mmhg Medium (C): 500Mmhg +/- 100 Mmhg High(H): 800Mmhg +/- 100Mmhg, Ce & Iso Certified , K Nail -Sizes 6 To 12 Mm Dia. , K.Wires (Kirshners Wire) (S.S) Size : 1 Mm , 1.5 Mm, 2 Mm, 2.5 Mm, 3 Mm , Leucocyte Depleting Filter , Needle, For Spinal Anaesthesia, Disposable, Thin Walled Technology, Metal Stylet & Metal Introducer, Extra Long Needles For Obese Patients Assorted Size. , Nitrrous Oxide Cylinder 5 Lit Wc, A Typeis 7285 Read With Approval From Petroleum And Explosives Safety Organization Goi Specification : With Pin Index Chromeplated Valves As Per Is 3745, 2006 Inlet Size 18.16 Mm And Up 177 Kg/Cm2. Token Part No. Vp-00002-N2o(Yoke Type Valve Connection For Small Medical Gas Cylinders) 1. Water Capacity : 5.0 Lts. 2. Hydrostatic Test Pressure : 250 Kgf/Cm2 Maxm. 3. Working Pressure : 150 Kgf/Cm2 4. Cylinder Outside Dia : 108.58 Mm. 5. Min Wall Thickness : 3.5 Mm. 6. Weight : 8.0 Kgs. 7. Length : 735 Mm. 8. Gas Capacity : 0.75 Cum , Oximetry Cable For Cco Monitor (Reusable) , Oxygen Cylinder 46.7 Lit Wc D Type Is 7285 Read With Approval From Petroleum And Explosives Safety Organization Goi Specification : 1. Water Capacity : 46.7 Lts. 2. Hydrostatic Test Pressure : 250 Kgf/Cm2 Maxm. 3. Working Pressure : 150 Kgf/Cm2 4. Cylinder Outside Dia : 232 Mm. 5. Cylinder Min Wall Thickness : 5.2 Mm. 6. Weight : 52.0 Kgs. 7. Length : 1365 Mm. , Oxygen Cylinder 5 Lit Wc A Type Is 7285 Read With Approval From Petroleum And Explosives Safety Organization Goi Specification : With Pin Index Chrome Plated Valves As Per Is 3745, 2006 Inlet Size 18.16 Mm And Up 177 Kg/Cm2. Token Part No. Vp-00001-Mo2(Yoke Type Valve Connection For Small Medical Gas Cylinders) 1. Water Capacity : 5.0 Lts. 2. Hydrostatic Test Pressure : 250 Kgf/Cm2 Maxm. 3. Working Pressure : 150 Kgf/Cm2 4. Outside Dia : 108.58 Mm. 5. Min Wall Thickness : 3.5 Mm. 6. Weight : 8.0 Kgs. 7. Length : 735 Mm. 8. Gas Capacity : 0.75 Cum , Oxygen Cylinder B Type Is 7285 Read With Approval From Petroleum And Explosives Safety Organization Goi Specification : Cylinder 10 Lit Wc With Valve Guard With Valve Fitted With Ss304 Flow Control Spindle And Nylon66 As Per Is : 3224,2002, Inlet Size 2 5.4Mm, Wp 205 Kg/Cm2 Token No. Part No. Vo-00128. 1. Hydrostatic Test Pressure :- 250 Kgf/Cm2 Maxm. 2. Working Pressure :- 150 Kgf/Cm2 3. Water Capacity :- 10.2 Ltr + 5%/- 0% 4. Outside Dia : 139.8 Mm. 5. Min Wall Thickness : 4.2 Mm. 6. Length : 855 Mm. 7. Weight (Approx) : 15.2 Kg. 8. Material : Manganese Steel With Yield Strength Greater Than 48Kgf/Cm2. , Pain Relief Detachable Silicon Implantable Catheter 9.6Fr With Antikinking Sleeve Sitimplant Titanium Device With Peel Away Desilet, Compatible With Mri Frequency-Height (8Mm-11Mm) & Weight (3.5G-10.5G) With Tunnellisation Needle And Teflon Coating Nitinol Guide Wire, Bloodless Access & Vein Lifting Device. Silicone Septum Access Long Length Non Coring Needles ,Sizes-20G/22G & Length-15 To 30Mm , Pfn Short And Long Material-Titanium, With Required Screw (Support Of Instrument Should Be Provided For Operation) , Pigtail Diagnostic Catheter, Size: 4Fr., 5Fr. & 6Fr. • Catheter Length Should Be 100 - 125Cm. • Tip Should Be Straight / Angled , Platinum Chromium Coronary Stent System , Pulmonary Artery Swan Ganz Catheter With Introducer Kit * 5 Lumen Pa Catheter To Use For Pa Pressure And Also To Get Cardiac Output While Using It With Any Bed Side Monitor With Cardiac Output Module Installed In Any Department. * This Catheter Has To Be Introduced Through Introducer Sheath Kit Of Fr 8.5 , Recon Femoral Interlocking Nail- With Instrument Set Material - Titanium With Required Screw , Retractor, Abdominal Doyens Size 10 Cm. , Retractor, Abdominal Doyens Size 7.5 Cm. , Reusable Linear Cutter Stapler, Size: 55Mm/ 60Mm With Appropriate 100 Pcs Of Cartridge , Rush Nail Assorted Size , Scalp Vein Set (Disposable) Size 20G,Sterile ,Soft, Kink Resistant, Non-Toxic, Non Irritant Tube , Scalp Vein Set (Disposable) Size 21G Sterile ,Soft, Kink Resistant, Non-Toxic, Non Irritant Tube , Scalp Vein Set (Disposable) Size 22G Sterile ,Soft, Kink Resistant, Non-Toxic, Non Irritant Tube , Scalp Vein Set (Disposable) Size 23G, Sterile ,Soft, Kink Resistant, Non-Toxic, Non Irritant Tube , Scalp Vein Set (Disposable) Size 24G,Sterile ,Soft, Kink Resistant, Non-Toxic, Non Irritant Tube , Schanz Pin 1.5, 2.5, 3.5Mm , Schanz Pin Size : 2.5 Mm To 4.5 Mm & 6.5Mm Cancellous , Schanz Pin Size : 2.5 Mm To 4.5 Mm Cortical , Scissor, Blunt-Blunt Scissors. Blunt Tips Screw Joint, Ring Handle. Very Sharp Edges With Tc Insert. Size. 8 Inch. Curved, Made Of German Ss , Scissor, Blunt-Blunt Scissors. Blunt Tips Screw Joint, Ring Handle. Very Sharp Edges With Tc Insert. Size. 8 Inch. Straight, Made Of German Ss , Scissor, Episiotomy, Curved, 6 Inch, Made Of German Ss. , Scissor, Episiotomy, Curved, 8 Inch, Made Of German Ss. , Scissor, Episiotomy, Curved, 9.5 Inch, Made Of German Ss. , Scissor, Episiotomy, Straight, 6 Inch, Made Of German Ss. , Scissor, Episiotomy, Straight, 8 Inch, Made Of German Ss. , Scissor, Episiotomy, Straight, 9.5 Inch, Made Of German Ss. , Scissor, Sharp-Blunt Scissors. One Pointed & One Blunt Tips Screw Joint, Ring Handle. Very Sharp Edges With Tc Insert. 8 Inch. Straight, Made Of German Ss , Scissor, Sharp-Sharp Scissors. Pointed Tips, Screw Joint, Ring Handle. Very Sharp Edges With Tc Insert. Size. 8 Inch. Curved, Made Of German Ss , Scissor, Sharp-Sharp Scissors. Pointed Tips, Screw Joint, Ring Handle. Very Sharp Edges With Tc Insert. Size. 8 Inch. Straight, Made Of German Ss , Scissor, Stitch Cutting Scissor,Fine Sharp Edges, Tc Inserts, Size. 5.5 Inch, Curved, Made Of German Ss , Scissor, Stitch Cutting Scissor,Fine Sharp Edges, Tc Inserts, Size. 5.5 Inch, Straight, Made Of German Ss , Scissor,Metzenbaum Scissors, Screw Joint, Ring Handle, Very Sharp Edges With Tc Inserts, Size 11, Curved, Made Of German Ss. , Scissor,Metzenbaum Scissors, Screw Joint, Ring Handle, Very Sharp Edges With Tc Inserts, Size 11, Straight Made Of German Ss. , Scissor,Metzenbaum Scissors, Screw Joint, Ring Handle, Very Sharp Edges With Tc Inserts, Size 9, Straight Made Of German Ss. , Slow Infusion Pump, Motor Driven With Drop Rate Range Of Minimum 1-250D/Min And Flow Rate Range Of Minimum 1-1000Ml/H, Minimum Kvo Rate Of 1.0Ml/H, Anti Bolus Function And 3 Level Occlusion Pressure Monitoring. , Ss Wire Sizes 18, 20, 22, 24 , Stainless Steel Wire - 16, 18, 20, 22 G , Steinman Pin , Sterile Disposable Spinal Needle For Single Use 22G X 3 Inch , Supraglottic Airway Device 2Nd Generation Specification : 1. Cuff-Should Be Made From Soft Gel Like Material ( Medical Grade Thermoplastic Elastomer) That Should Create A Non-Inflatable, Anatomical Seal Of The Pharyngeal, Laryngeal And Perilaryngeal Structures. 2. 15 Mm Connector. 3. Position Guide 4. Gastric Channel / Drainage Port. 5. Bite Block 6. Buccal Cavity Stabilizer 7. Epiglottis Blocker 8. Display Of Size – For Quick, Easy Reference And Weight Guidance. 9. Can Be Used As A Conduit For Intubation. 10. Size 1,1.5,2,2.5,3,4,5. , Syringe, Disposable Plastic 50 Ml In Sterile Packing (Luer Mount/Luer Lock, Central/ Eccentric Nozzle) , Tfn With Instrument Set Material- Titanium, With Required Screw , T-Handle Drill , Thrombus Aspiration Catheter. • Pre Loaded Stylet. • Fully Braided Shaft . • 20 - 24Cm Long Rapid Exchange Lumen. • Clearly Visible 10Cm Depth Marker 90Cm From Distal Tip To Support Insertion Into Guiding Catheter, Catheter Length 130 - 140 Cm , Titanium Elastic Nail (Tens) Dia - 2.5, 3,3.5 And 4Mm In Diameter Size : 44Cm , Titanium Elastic Nail 2.5 Mm To 4 Mm With Corresponding Instrument Set. , Tuning Forks Of 256, 512, 1024 Hz Specification : A. Of Frequencies 512 Hz B. Made Up To Good Quality Rust Free Stainless Steel. C. Should Have Minimum Decay Time Of 40 Sec. D. Footplate Should Be Present. , Venous - 12F, 14F, 16F, 18F, 20F, 24F & 28F (Metal Angled Tip) 30,32,34,36 (Straight) , Volume-Based Lung Exerciser 2500Ml 1. One-Way Valve To Ensure Patients Inhale, Rather Than Exhale Into Unit 2. Adjustable Incentive Marker 3. Highly Visible Piston With Universal Graphics 4. Oxygen Port To Allow Administration Of Supplemental Oxygen 5. Bed Rail Hook For Positioning At The Patient Bedside , Important Note: 1. All Prospective Bidders Are Requested To Quote The Rate In Boq As Per Accounting Unit (Au) Repeat As Per Accounting Unit (Au) & Item Specifications As Mentioned In The Table-1. Wrong Quoting Of The Rate In Boq Will Be Dealt With As Per Penal Provisions Of The T&C Of The Tender. 2. Quality Of The Product Supplied, May Be Ascertained By Testing / Physical Examination By The Experts At Any Stage Of The Tender Period. 3. The Equipment Should Be Us Fda/ Ce/ Bis/ Cdsco Approved (Us Fda/ Ce Requirements Will Be Applicable Only When The Indian Standards Like Bis/ Cdsco Is Not Available). 4. The Prospective Bidders Of The Said Tender Are Requested To Make A Declaration In Affidavit Under Annexure Vi(B)In Case Of Sole Manufacturer/Importer (I.E. Proprietary In Nature). 5. If The Item(S) Under Sole Manufacturer / Importer Is (Are) Proprietary In Nature, Quarterly Intimation Is Solicited From The Approved Bidders Positively Regarding The Status Of Their Item(S) Proprietary In Nature, Otherwise Their Item(S) Will Be Blocked In The Smis. 6. In Case Of Tie Bid, Decision Will Be Taken By The Tia As Per G.O. No. 2320-F(Y), Dated 07.06.2022 Issued From Finance Department Audit Branch (Group T).

Contract Date: May 15, 2025 Contract Value : ₹ 1

Government Departments No of Bidders 79

West Bengal View Result →

14.

Educational and Research Institute #7168448 AOC

Tender For Supply And Installation Of Electronics Trainer At Consignee Locations- 1 LED Lighting System Trainer 2 LED TV Trainer 3 Solar Power Generation Trainer 4 Commercial Radio AM/ FM Trainer 5 Mobile Phone Trainer 6 CCTV Set Up Trainer 7 SMPS Trainer 8 UPS Trainer 9 ADC to DAC Cards Trainer 10 Basic Electronics Trainer 11 Discrete Components Trainer 12 Digital and Analog Bread Board Trainer 13 Digital IC Trainer 14 Electronics Sensor Trainer - 10 Sensors 15 Fiber Optic Communication Trainer 16 Frequency Modulator and Demodulator Trainer 17 Linear IC Trainer 18 Machine Shop Sensor Trainer 19 Op Amp Trainer 20 PAM, PPM, PWM Trainer 21 Power Electronics Trainer - 06 Application Boards 22 Seven Segment DPM Trainer 23 Data Acquisition System 24 Analog Component Trainer 25 Micro Processor Trainer 26 Microcontroller Trainer (8051) with Programming Software and 6 Applications 27 LAN Protocol Simulation and Analyser Software

Contract Date: Mar 28, 2025 Contract Value : ₹ 3.62 Crore

Statutory Bodies & Commissions/Committees No of Bidders 12

Maharashtra View Result →

15.

Educational and Research Institute #6932055 AOC

Contract Date: Mar 06, 2025 Contract Value : ₹ 1.00 Crore

Government Departments No of Bidders 8

Kerala View Result →

16.

Agriculture #6837440 AOC

Contract Date: Feb 15, 2025 Contract Value : ₹ 1.22 Crore

Government Departments No of Bidders 12

Tripura View Result →

17.

Civil Aviation #6467187 AOC

Bids Are Invited For Calibration Oftest Equipments Oscilloscope , Digital Multimeter , Frequency Counter , Usb Peak Power Sensor , Spectrum Analyzer , Ils And Dvor Analyser , Usb Average And Peak Power Sensor , Nav Analyzer , Portable Ils Receiver Pir , Digital Clamp Earth Tester , Battery Tester , Earth Tester , Rf Power Meter , Digital Clamp Meter , Cable And Antenna Analyzer , Radio Test Set Total Quantity : 32

Contract Date: Ref. Documents Contract Value : ₹ 54,870

Boards / Undertakings / PSU No of Bidders 2

Kerala View Result →

18.

Educational and Research Institute #5607186 AOC

E-Tender For Equipment And Instrument At Govt. Medical College And Cancer Hospital Chhatrapati Sambhajinagar , Portable Digital Radiology System , Fully Automated Random Access Clinical Chemistry Analyser , Fully Automated Immuno Analyser , Flexible Video Bronco Scope (Adult &Peadiatric) , Vaporizer Presser Regulating System With Alarm Panalhuchelmo Tank , Ultrasonic Scalpel With Radiofrequency Vhecelsceller , Fecoemulsification System , Radio Frequency Cautery , Slit Lamp Digital Imaging System , Hydraullic Operation Table With Remote

Contract Date: Dec 20, 2024 Contract Value : ₹ 2.49 Crore

Government Departments No of Bidders 4

Maharashtra View Result →

19.

Health and Family Welfare #5114105 AOC

Contract Date: Dec 04, 2024 Contract Value : ₹ 1.46 Crore

Government Departments No of Bidders 13

Haryana View Result →

20.

Educational and Research Institute #4744419 AOC

Name Of Work: Procurement Of Equipments, Instruments, Machineries, Tools, Etc. Related To Electrical Engineering / Electronics & Telecommunication Engineering Laboratories And Workshops Of Mathabhanga Government Polytechnic, Mathabhanga, Cooch Behar, West Bengal - 1.01 Transistor Trainer Kit: 1.02 Operational Amplifier Trainer Kit: 1.03 Electronic Trainer Board ( In Build Bread Boards Provision ) : 1.04 555 Timer In Astable, Monostable Operation: 1.05 Discrete Components Resister: 1.06 Discrete Components Capacitors: 1.07 Determine The Permeability Of Magnetic Material By Plotting Its B-H Curve: 1.08 Series Parallel Resonance Of R-L-C Ckt: 1.09 Trainer Kit For Superposition, Thevenins Theorem, Nortons & Max Power Transfer: 1.10 Speed Control Of Induction Motor 1Ph By Using Scr: 1.11 C.T. & P.T. Testing Trainer Kit: 1.12 Induction Type Electromagnetic Relay: 1.13 Mccb / Elcb: 1.14 Air Circuit Breaker: 1.15 Vaccum Circuit Breaker: 1.16 Transmission Line Protection Simulation Kit: 1.17 Diesel Generator Power Plant: 1.18 Hydro Power Plant: 1.19 Horizontal Axis Small Wind Turbine: 1.20 Csp Plant: 1.21 Kelvin Double Bridge: 1.22 Renewable Energy Lab: 1.23 Renewable Energy Lab: 1.24 Renewable Energy Lab: 1.25 Voltmeter: 1.26 Voltmeter: 1.27 Ammeter: 1.28 Ammeter: 1.29 Multimeter: Analog Multi-Meter Of Isi Marked 1.30 Multimeter: Digital Multi-Meter Of Isi Marked 1.31 Wattmeter: Dynamometer Wattmeter Of Isi Marked : Low Power Factor ( 0.2 ) 1.32 Voltmeter: 1.33 Ammeter: 1.34 Starter: Dc 3-Point Starter 1.35 Starter: Dc 4-Point Starter 1.36 Dc Power Supply 1.37 Rheostat: Rheostat With Sliding Jockey 1.38 Rheostat: Rheostat With Sliding Jockey 1.39 Digital Energy Meter: Digital Energy Meter Of Isi Marked 1.40 Digital Megger: Digital Megger For Measuring Insulation Resistance Of Isi Marked 1.41 Variac: Single Phase Variac Of Isi Marked 1.42 Variac: Three Phase Variac Of Isi Marked 1.43 Tachometer: Tachometer Of Isi Marked 1.44 Clamp On Meter Of Isi Marked 1.45 Power Factor Meter Of Isi Marked 1.46 Phase Sequence Indicator Of Isi Marked 1.47 Frequency Meter Of Isi Marked 1.48 Variac: Three Phase Variac Of Isi Marked 1.49 Transformer: 1.50 Transformer: 1.51 3-Ph Resistive Load: 1.52 3-Ph Inductive Load: 1.53 3-Ph Capacitive Load: 1.54 3-Ph Starter: 1.55 3-Ph Dol Starter: 1.56 Stroboscope: 1.57 Dcgenerator Voltage Build Up: 1.58 Brake Test In Dc Series Motor: 1.59 Speed Controlof 3-Phase Squirrel Cage Induction Motor: 1.60 Load Test Of An Alternator & % Regulation At Various Loads With Unity Power Factor: 1.61 Reversing The Direction Of Rotation Of A Single Phase Induction Motor: 1.62 Measurement Of Slip Of 3-Phase Induction Motor: 1.63 Synchronization Of Two 3-Phase Alternators: 1.64 Kit For Study Of Improvement Of Power Factor With Static Capacitor Bank: 1.65 Kit For Study Of Active & Reactive Power With Simulatiol Kit & Laptop: 1.66 Model Of Various Types Of Turbines Used In Power Generating Stations: 1.67 Different Type Of Insulators: 1.68 Cable For Study Of Rubber, Pvc, Xlpe, Frs, Frls, Submerged Flatcable, Instrumention Cable, Communication Cable, Co-Axial Cable, Optical Fiber: 1.69 Pyranometer: 1.70 Photo Volatic System Used In Street Light: 1.71 Study Of Power System Of 6.6 Kv / 400 V Substation Used For A Housing Conplex: 1.72 D.C Network Analyser: 1.73 Different Type Of Excitations System Used In Alternator: 1.74 Motor-Alternator Set For Synchronisation Of Two Alternator With Sychronising Panel Including Check Synchroscope & Bulb Arrangement To Perform Two Bright One Dark Lamp Method: 1.75 Wire: 1.76 Wire: 1.77 Plier: 1.78 Tester: 1.79 Screwdriver Set: 2 Electronics And Telecommunication Engineering 2.001 50 Mhz Dual Channel Cro: 2.002 Function Generator: 2.003 Digital Multimeter: 2.004 Variable Dc Power Supply: 2.005 Diode Trainer Kit: 2.006 To Study The Rectifier With And Without Capacitor Filter For : — ( A ) Half-Wave Rectifier, ( B ) Full-Wave Rectifier, ( C ) Bridge Rectifier: 2.007 To Study The Output Waveform Of Push-Pull Amplifier For Class-A, Class-B & Class-Ab Operations: 2.008 To Study The Fet Characteristics Trainer: 2.009 To Determine Frequency Response Characteristics Of Rc Coupled Amplifier Circuit And Calculation Of Bandwidth, Midband Gain, Input Impedance And Output Impedance For : ( A ) Single-Stage Amplifier ( B ) Double-Stage Amplifier: 2.010 Fet Characteristic Trainer Kit: 2.011 Mosfet Characteristics Trainer Kit; 2.012 Shunt And Series Regulator Trainer Kit For Following Plots: Line Regulation And Load Regulation: 2.013 To Study The V-I Characteristics Of Ujt Trainer Kit.: 2.014 To Study The Input And Output Characteristics And To Find The H-Parameters Of A Bjt For : — ( A ) C-E Configuration, ( B ) C-C Configuration, ( C ) C-B Configuration: 2.015 Feedback Amplifier Trainer: 2.016 Tuned Amplifier Trainer: 2.017 Oscillator Trainer Kit: 2.018 To Determine The Following Characteristics Of Op-Amp: —A ) Input Offset Voltage, B ) Slew Rate, C ) Non-Inverting Gain, D ) Inverting Gain E ) Adder, F ) Subtractor, G ) Differentiator, H ) Integrator And I ) Voltage Follower: 2.019 To Study The Waveform Of Ujt As Relaxation Oscillator.: 2.020 To Study The Characteristics Of Ic555 Timer Connected As:A ) Astable Multivibrator, B ) Monostable Multivibrator.: 2.021 Digital Trainer Kit ( Experiment 1. -To Verify The Truth Table Of Not, Or, And, Nand, Nor, Xor, X-Nor With Ttl Logic Gates And Cmos Logic Gates. Experiment 2.- To Realize Different Boolean Expressions With Logic Gates. Experiment 3.-To Realize Half-Adder, Full-Adder, Subtractor, Parallel And Serial Full-Adder. Experiment 4-To Design 1’S Complement, 2’S Complement And 9’S Complement Adder-Subtractor. ) : 2.022 Complete Setup To Design / Construct Programmable Up / Down Counter.: 2.023 Complete Setup To Implement Encoder, Decoder , Multiplexer And De-Multiplexer.: 2.024 Complete Setup To Design Controlled Shift Register And Study Their Function.: 2.025 Complete Setup To Design / Construct Parity Generator, Checker And Comparator.: 2.026 Complete Setup To Design / Construct Binary Synchronous And Asynchronous Counter.: 2.027 Digital I.C Tester: 2.028 A / D & D / A Converter Trainer: 2.029 To Verify The Mesh Analysis And Node Analysis Using Independent And Controlled Source.: 2.030 To Study The Series And Parallel Resonant Circuit.: 2.031 To Measure The Characteristic Impedance Of Symmetrical T And Ii Networks: 2.032 To Test And To Measure The Cut –Off Frequencies Of The Following: — ( A ) Constant K-Type Low Pass Filter; ( B ) Constant K-Type High Pass Filter: 2.033 To Test T And Pi Attenuator.: 2.034 To Study Standing Wave Pattern For A Transmission Line Of Finite Length With: ( A ) Open Termination, ( B ) Shorted Termination And Matched Termination. 2.To Measure The Attenuation Constant And Phase Shift Constant For Matched Termination.: 2.035 To Study The Given Rc Integrator And Differentiator At Different Time Constant.: 2.036 Computer Programming Language Laboratory: 2.037 8085 Microprocessor Traineer Kit : 2.038 Microprocessor 8086 Trainer Kit: 2.039 To Study The Amplitude Modulation And Demodulation Ttrainer Kit: 2.040 Am / Fm Radio Receiver Kit: 2.041 Analog Signal Sampling & Reconstruction Trainer Kit: 2.042 Pulse Code Modulation And Demodulation System Trainer: 2.043 Frequency Modulation And Demodulation Kit: 2.044 Delta / Sigma Delta And Adaptive Delta Modulation Demodulation Kit: 2.045 Dpcm & Adpcm Modulation / Demodulation Kit: 2.046 Epbax Trainer Kit : 2.047 Black & White Tv Trainer Kit With Provision Of Fault Finding: 2.048 Dth Tv And Set Top Box Trainer Kit: 2.049 Colour Tv Trainer With Provision Of Fault Finding: 2.050 Tdm Pulse Code Modulation Trainer Kit: 2.051 Tdm Pulse Code Demodulation Trainer Kit : 2.052 To Study The V-I Characteristic Of Gunn Diode.: 2.053 Fdm Transmitter / Receiver Kit: 2.054 Digital Storage Oscilloscope: 2.055 Spectrum Analyzer : 2.056 Antenna Trainer 86 - 860 Mhz: 2.057 Microwave Test Bench ( Klystron Based ) : 2.058 Ask / Psk / Fsk Modulation And Demodulation Kit: 2.059 Microwave Test Bench ( Gunn Based ) : 2.060 1 Ghz Spectrum Analyser: 2.061 The Single Board Trainer Kit Should Contain Ic Regulated Power Supply, Different Types Power Diodes, Digital Ammeter And Voltmeter And Other Necessary Passive Components 2.062 Power Transistor Drive Ckt Study Kit: 2.063 To Study Drive Circuit Of Scr: 2.064 To Study A Single Phase Rectifier—Output Waveform With Phase Control Circuit: 2.065 To Plot V / I Characteristics Of Triac: 2.066 To Study A Polyphase Rectifier: 2.067 To Plot V / I Characteristics Of Diac: 2.068 To Study A Phase Control Ac Regulator: 2.069 Servo Regulator Stabilizer Study Kit: 2.070 To Study A Jones Chopper: 2.071 To Study Speed Control Of Induction Motor By Voltage And Frequency Variation: 2.072 To Study The Speed Control Of Dc Motor By: ( A ) Varying Field Current Keeping Armature Voltage Constant; And, ( B ) Varying Armature Voltage Keeping Field Current Constant 2.073 Power Electronics Devices Trainer Kit: 2.074 Stepper Motor Study Set: 2.075 Single Phase Bridge Inverter: 2.076 Plc Trainer ( Experiment 1-Use Of Simulation Package For Different Function Of Plc. Experiment 2- Verify Function Of Logic Gates By Using Plc. Experiment 3- Write And Verify Ladder Program For Motor On-Off Control With Two Push Button ) 2.077 1 Kva Online Ups Trainer Kit: 2.078 Stepper Motor Kit 2.079 Power Electronics Development Trainer 2.080 Digital Lcr Meter: 2.081 Distortion Factor Meter: 2.082 To Measure L & Q By Maxwell Method: 2.083 To Measure The Unknown Capacitance By Schering Bridge: 2.084 To Measure The Distortion In A Given Waveform: 2.085 To Measure The Unknown Frequency By Wein Bridge: 2.086 Microcontroller Trainer Kit 1.Write A Simple Assembly Programs For A. Addition B. Subtraction B. Multiplication D. Division 2. Write A Programs For ( Any Two Of The Following ) I. 4 X 4 Matrix Keypad Interface Ii. Character Based Lcd Interface Iii. Analog To Digital Conversion ( On Chip Adc ) Iv. Serial Eeprom V. Seven Segment Led Display Interface Vi. Interfacing With Temperature Sensor Vii. Stepper Motor Interface: 2.087 To Study The Function Of Fibre Optic Analog Link.To Study The Frequency Response Of Optical Receiver At Various Load Conditions. 3. To Study The Losses In Optical Fibre:— ( A ) Propagation Loss, ( B ) Bending Loss. 4. To Study The Numerical Aperture Of Optical Fibre: 2.088 To Be Familiar With The Following Network Components: 2.089 To Be Familiar With Mobile Telephone: 2.090 To Be Familiar With Cordless Telephone: 2.091 To Be Familiar With Fax: 2.092 Network Components: 2.093 24 Port Managed Switch: 2.094 24 Port Unmanaged Switch: 2.095 8 Port Hub: 2.096 Access Points: 2.097 Network Passive Component For Networking: 2.098 Lan Trainer: 2.099 Pc Based Optical Fiber Lan Trainer Package: 2.100 Installation & Commissioning Of Network: 2.101 To Measure Displacement With Lvdt: 2.102 To Measure Temperature With Thermocouple: 2.103 To Measure Temperature With Thermistor: 2.104 To Measure Pressure With Strain Gauge: 2.105 To Plot The Characteristics Of Rtd ( Pt-100 ) : 2.106 Temperature Controller With On-Off Controller, Temperature Controller With Pi Controller, Temperature Controller With Pid Controller:

Contract Date: Mar 31, 2023 Contract Value : ₹ 40.34 Lakh

Government Departments No of Bidders 17

West Bengal View Result →

21.

Civil Aviation #4634098 AOC

Bids Are Invited For Calibration Of Test Equipment At Rgi Airport Two Channel Digital Oscilloscope , Frequency Counter , Digital Multimeter , True Rms Multimeter , Digital Earth Tester , Nav Analyzer , Intelligent Counter , Digital Storage Oscilloscope , Thruline Wattmeter , V Uhf Airnav Com Analyzer , Tru Rms Multimeter , Universal Counter , Analog Rf Signal Generator , Scopometer Color , Programmable Pulse Generator , Rf Power Meter , Peak Power Sensor , Bird Site Hawk 29 Antenna And Tc Testing Cable Analyzer , Cro , Digital Multimeter , Clamp Meter , Digital Battery Meter , True Rms Digital Multimeter , 2 Channel 100Mhz Oscilloscope , Universal Frequency Counter Timer , Signal Generator , Radio Test Set , Radio Test Set Along With 300W Attenuator Smart Battery Charger With Four Li Ion Batteries Cables And Connectors , Dmm 3 And Half Digit , Oscilloscope , Frequency Counter , Nav Analyzer , Power Meter And Sensor Nrp Z81 , Multimeter , Radio Comm Test Set , Functional Sweep Generator Calibration Of Nav Analyser, Calibration Of Two Channel Total Quantity : 57

Contract Date: Ref. Documents Contract Value : ₹ 3.07 Lakh

Boards / Undertakings / PSU No of Bidders 3

Telangana View Result →

22.

Civil Aviation #4034853 AOC

Bids Are Invited For Calibration Of Test Equipments Oscilloscope , Digital Multimeter , Frequency Counter , Usb Peak Power Sensor , Spectrum Analyzer , Ils And Dvor Analyser , Usb Average And Peak Power Sensor , Nav Analyzer , Portable Ils Receiver Pir , Digital Clamp Earth Tester , Battery Tester , Earth Tester , Rf Power Meter , Digital Clamp Meter , Cable And Antenna Analyzer , Radio Test Set Total Quantity : 30

Contract Date: Ref. Documents Contract Value : ₹ 1.13 Lakh

Boards / Undertakings / PSU No of Bidders 3

Kerala View Result →

23.

Educational and Research Institute #2301414 AOC

Contract Date: Dec 01, 2023 Contract Value : ₹ 19.49 Crore

Government Departments No of Bidders 16

Goa View Result →

24.

Educational and Research Institute #2205702 AOC

Supply Of Equipment Of Physics Laboratory-2 Study Of Electron Spin Resonance-Determine Magnetic Field As A Function Of The Resonance Frequency. 3 Study Of Zeeman Effect: With External Magnetic Field; Hyperfine Splitting. 4 To Verify The Law Of Malus For Plane Polarized Light. Model: Detech -Ml01 5 To Analyze Elliptically Polarized Light By Using A Babinet’S Compensator. Model: Detech-Bc01, Complete With Babinet Compensator, Sodium Lamp, Lamp House, Transformer, Polariser, Analyser, Optical Bench With Riders. 6 To Determine The Wavelength And Velocity Of Ultrasonic Waves In A Liquid ( Kerosene Oil, Xylene, Etc. ) By Studying The Diffraction Through Ultrasonic Grating. Model: Detech-Usw01. Nobjective: N1. To Study The Diffraction Of Light Due To Propagation Of Ultrasonic Wave In A Liquid N2. To Determine The Speed Of Sound In Various Liquids At Room Temperature N3. To Determine The Compressibility Of The Given Liquids. Napparatus: N1. Radio Frequency Oscillator Fitted With A Frequency Meter N2. Quartz Crystal Slab Fitted With Two Leads N3. Spectrometer N4. Glass Cell With Sample Liquid ( Kerosene / Toluene / Turpentine Oil Etc ) N5. Sodium Lamp N6. Spirit Level. 7 To Study Polarization And Double Slit Interference In Microwaves. 8 To Verify The Stefan’S Law Of Radiation And To Determine Stefan’S Constant. Model: Detech –Sbbr Nmeasurement Of Stefans Constant Using Black Body Radiation. Ncomplete With Stefans Conatant Apparatus, Very High Sensitive Light Spot Galvanometer With Sensitivity Control, High Quality Thermocouple.3 Lt Cu Boiler, Rubber Tube, Electrical Heater With Temp. Control. N 9 To Determine The Boltzmann Constant Using V-I Characteristics Of Pn Junction Diode. Model: Detech-Boltz Nthe Apparatus Consists: N ( A ) A Digital Millivoltmeter ( 0 – 9.99 V ) To Measure The Voltage Across The Diode. N ( B ) A Highly Stabilized Power Supply Whose Voltage Can Be Varied In Steps Of 1 Mv Using A Ten – Turn Potentiometer. 10 To Measure The Magnetic Susceptibility Of Solids. Napparatus For The Measurement Of Susceptibility Of Solids By Gouys Method. Nthe Apparatus Consists Of: Na ) Scientific Balance, ( With Weight Box ) Nb ) Al. Samples And Glass Tube For Powder Samples Nc ) Gouy’S Balance Stand Nd ) Electromagnet, Detech Ne ) Constant Current Power Supply, Detech Nf ) Digital Gaussmeter, Detech Ncomplete In All Respect . Make : Detech N 11 To Measure The Dielectric Constant Of A Dielectric Materials With Frequency.Model: Detech-Dc Nto Calculate Dielectric Constant Of Solids. Nthe Instrument Consists Of A High Frequency R.F Oscillator 4Mhz With Outer Gang Condenser, Optimum Tuning Is Indicated On Meter. The Change In Meter Reading After Placing Dielectric Material Between Parallel Plates Can Be Detected And Difference Can Be Noted. Works On 220V Av 50Hz. Ndielectric Constant Experiment Consists Of The Following: N1. Dielectric Constant Apparatus. N2. Variable Gang Capacitor N3. Test Capacitor ( Solid Gang Condenser ) Nthree Types Of Bakalite Sheets For Dielectric Materials Ntwo Set Of Leads N 12 To Determine The Complex Dielectric Constant And Plasma Frequency Of Metal Using Surface Plasmon Resonance ( Spr ) 13 To Draw The Bh Curve Of Fe Using Solenoid & Determine Energy Loss From Hysteresis. Model: Detech - Bhct Nto Draw Bh Curve Of A Fe Using Solenoid And Determine Energy Loss From Hysteresis Nb-H Curve Tracer Nsetup Consists Of Main Unit Having Variable A.C. Supply And Control For Magnetizing Coil, Specially Designed Power Supply For Pickup Probe, I.C. Holder Having Magnetizing Coil And Pickup Probe. Samples Of Different Materials ( 4 Nos. ) . Nadditional Accessory Required : C.R.O. ( Not Supplied ) Nobjective N1. Study Of The Hysteresis Curves Of Transformer Stampings, Ferrites And Other Magnetic Materials Of Different Shapes And Determination Of Their Energy Losses. N2. Study Of The Hysteresis Curve As A Function Of The Magnetic Field. N3. Determination Of Saturation, Magnetization, Reminence And Coercivity Of Magnetic Nmaterials N 14 To Measure The Resistivity Of Semiconductor ( Ge ) With Temperature By Four-Probe Method ( Room Temperature To 1500 C ) And To Determine Its Band Gap. Model : Detech – Bg-S-D Nto Study The Temperature Dependence Of Reverse Saturation Current In A Junction Diode & Hence To Determine The Band Gap Of Semiconductor. Complete With Temp. Controlled Oven, Digital Voltmeter, Digital Micro Ammeter, Dc Regulated Power Supply, Semiconductor, Thermometer, Manual. N 15 To Determine The Hall Coefficient Of A Semiconductor Sample. Ncomplete With The Following : Nhall Probe ( Ge Crystal-N Type ) Nhall Probe ( Ge Crystal-P Type ) Nhall Probe Stand ( Wooden ) Nhall Effect Set Up Detech Nelectromagnet. Detech Nconstant Current Power Supply. Detech Nballistic Galvanometer Nlamp & Scale Nstandard Solenoid Nphol`S Commutator Nrheostat 25 Ohms / 5 A - Heavy Duty N 16 Vacuum Desiccator.

Contract Date: Sep 02, 2021 Contract Value : ₹ 2.09 Lakh

Local Bodies No of Bidders 7

West Bengal View Result →

25.

Health and Family Welfare #2105492 AOC

Contract Date: Oct 18, 2021 Contract Value : ₹ 66.94 Crore

Government Departments No of Bidders 92

Puducherry View Result →

26.

Health and Family Welfare #1429788 AOC

Contract Date: Jun 08, 2023 Contract Value : ₹ 2.00 Crore

Government Departments No of Bidders 6

Haryana View Result →

TenderDetail

Loading tenders