View Bid Results For Radiation Survey Meter Tenders

We found 295 Bid Results related to radiation survey meter tenders. You can find Contractor details who won radiation survey meter tenders along with contract details in Bid awards announcements section.

Indian Tenders
9
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
284
9
2
Tender Publishing Platform
242
53
State / UT
26
68
30
21
20
20
17
17
14
14
13
13
10
8
5
4
3
3
3
2
2
2
2
1
1
1
1
Contract Value
54
142
81
16
Publish Date
0
0
0
0
0
Sector
18
116
47
28
19
18
13
13
11
7
7
3
3
3
2
2
1
1
1
Ownership
4
198
48
37
12
Within keyword
Active filters:
Showing 1–6 of 295 tenders matching your filters
1.
Science and Technology #11454748 AOC
Bids Are invited for Portable Radiation Survey Meter With All Required Cables, Manuals And Accessories Total Quantity : 2
Contract Date: Ref. Documents Contract Value : ₹ 5.94 Lakh
Government Departments No of Bidders 1
Maharashtra View Result →
2.
Power #11370997 AOC
Bids Are invited for Radiation Survey Meter (Q3) Total Quantity : 1
Contract Date: Ref. Documents Contract Value : ₹ 4.77 Lakh
Boards / Undertakings / PSU No of Bidders 1
Karnataka View Result →
3.
Science and Technology #11255384 AOC
Bids Are Invited For Fabrication, Testing And Supply Of Digital Gamma Count Rate Meters Along With Spares , Radiation Survey Meter Total Quantity : 6
Contract Date: Ref. Documents Contract Value : ₹ 8.14 Lakh
Government Departments No of Bidders 1
Telangana View Result →
4.
Science and Technology #11172676 AOC
Bids Are Invited For Radiation Survey Meter (Q3) Total Quantity : 4
Contract Date: Ref. Documents Contract Value : ₹ 2.69 Lakh
Government Departments No of Bidders 8
Maharashtra View Result →
5.
Science and Technology #11127011 AOC
Bids Are Invited For Radiation Survey Meter (Q3) Total Quantity : 2
Contract Date: Ref. Documents Contract Value : ₹ 1.18 Lakh
Government Departments No of Bidders 6
Maharashtra View Result →
6.
Science and Technology #11126748 AOC
Bids Are Invited For Radiation Survey Meter (Q3) Total Quantity : 4
Contract Date: Ref. Documents Contract Value : ₹ 25.39 Lakh
Government Departments No of Bidders 2
Madhya Pradesh View Result →
7.
Science and Technology #11125412 AOC
Bids Are Invited For Radiation Survey Meter (Q3) Total Quantity : 2
Contract Date: Ref. Documents Contract Value : ₹ 1.52 Lakh
Government Departments No of Bidders 2
Kerala View Result →
8.
Power #11125316 AOC
Bids Are Invited For Radiation Survey Meter (Q3) Total Quantity : 6
Contract Date: Ref. Documents Contract Value : ₹ 24.78 Lakh
Boards / Undertakings / PSU No of Bidders 1
Rajasthan View Result →
9.
Defence #11097521 AOC
Tender For Provision Of One Mega Watt Solar Power Project Under Ge (I) (P) No 2.; 1 Supply and fixing of MS fabricated office container of size 15x8x8.5 feet with toilet cabin of size 5x4 feet for SCADA panel and local monitoring for accomodating portable shelter , office, or living space in high alttitude cold region with including PCC flooring work for installation of container including fixing arrangement completeall as specified and directed.Location conditionTemparature range -30 °C to +25°CAltitude -3500m above sea levelwind speed upto 120 km/hSnow load high (snow accumulation on roof)Readymade container shall include the following(a) Attached toilet with EWC/IWC pressure jet gun, water tap, exhaust fan, corner wash basin, tiles flooring, water tank stand , gyser provision, wall mixer and other accessories required for said locations conditions. 2 (b) Container shall include bottom frame 100mmx50mm C channel ISI marked, Top frame of size 50mmx50mm MS square pipe ISI marked , stiffener bottom 100mm x50mm, 50mmx25mm, 25mmx25mm MS square pipeISI marked stiffener top 50mmx25mm, 25mmx25m MS square pipe ISI marked, side post 50mmx50mm, 50mmx25mm MS square pipe ISI marked, Side wall stiffness specially formed CR sheets of thicknes 1.2mm internal wall panelling 8mm thick MDF and all vertically and horizontal corner will be nealty and smoothly finished with aluminium section and L angle, Roof outside 1.2mm thick sheet of make properly sloped and water tight, false ceiling 9mm thick and smoothly finished with aluminium section and L angle, flooring 18mm thick cemented board of make visaka industries will be fixed by means of self taping screw and 1.5mm thick PVC vinyl carpet will be fixed on the panel (100% water termite and dimensional proof with veyl carpet) Aluminium windows double shutter sliding aluminium powder coated windows of thickness of 1.2mm with 4mm thick glass of make saint Gobin for all windows safety grill from outside and canopy above the floor frame work by tubular pipe of 25x25, Door with lock and handles with hydraulic door closer. Insulation 25mm thick glass wool insulation of density 65kg/m3 on side wall and 50mm on ceiling , all wiring will be PVC insulated copper wires of ISI quality, suitable for 240 volts 50 bukhead, switches and socket of 6Amp of ISI make. Split air conditioner point 16Amp alongwith seperate MCB earthing point will be provided for safety. Outside painting with 1 coat of Epoxy primer with 2 coats of epoxy paint and specially formed hooks for easy lifting and shifting. 3 Material and Labour for Plain fillets 2nd class softwood . square, rectangular or triangular in section, clean sawn, secured with screws of size exc 13 and not exc 25 Sqcm complete all as specified and directed. 4 Material and Labour for for prepration of wooden surfaces and applying a coat of pink primer for filletsof surface of any description not otherwise described over 10cm in width or girth complete all as specified and directed. 5 Material and Labour for50mm thick bonded mineral wool blanket slab made from rock, density 48kg/Cum and fixed as per manufactures instruction complete all as specified and directed. 6 Material and Labour for 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with nails on walls complete all as specified and directed. 7 Material and Labour for 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with nails on ceiling complete all as specified and directed. 8 Material and Labour for cement concrete type D2 1:4:8 (40mm graded agg)as in foundations filling mass concrete and all as specified and directed. 9 Material and Labour for Pre-cast cement concrete block masonry with solid blocks in 1:3:6 type C-1 using20mm graded crushed stone aggregates, exc. 10 cm in width or girthand setting in mortar 1:6, complete all as specified and directed. 10 Material and Labour for 100mm thick cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregates as in flooring finished even and smooth without using extra cement complete all as specified and directed. 11 Material and Labour for renderring 15mm thick in CM 1:4 on fair faces of concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. 12 Material and Labour for renderring 15mm thick in CM 1:4 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified and directed. 13 Material and Labour for Walling of random rubble masonry, uncoursed well bonded bedded and solidly hearted built in CM 1:4 and flush pointing the surface in contact with earth in same mortar as the work proceeds complete all as specified and directed. 14 Supply and fixing of50mm thick PUF insulated water tank of capacity 5000 litres complete all as specified and directed. 15 Supply and fixing of50mm thick PUF insulated water tank of capacity 1000 litres complete all as specified and directed. 16 Supply, installation, errecting ,testing and commissioning of On grid connecting on ground Mono Perc half Cut Bifacial Solar photo voltaic (SPV) generation plant of capacity 825KWp DC capacity at standard test condition and750 KW AC capacity (Net capcity after derating), at CHUMATHANG for fixed on module mounting structure without tracking component including solar grade copper cable of suitable sizes upto Invertor,UPS for auxilliary supply to SCADA, string array combiner/ array junction boxes comprising of following sub components/sub systems including all necessary protection, control switches and relays as required for smooth functioning of the system and meeting the specifications as given and directed by Engineer-In-Charge, the quoted rates includes all components/accessories as given below and required from Solar panel to upto step up transformer 1000 KVA incomer termination complete all as specified and directed. 17 (A) Solar photo voltaic plant- : To obtain cumulative 825KWp, three tables of nearly equal size table (varaiation of 5% between table size is permissible) ofthe input of mono perc Half Cut Bifacial silicon solar PV modules of minimum or more than 540/545 Wp with minimum or more than 144 Nos solar cells preferably per module of standard size and weight as per NISE standard , frame anodised aluminium frame (double walled) with junction box IP 65 rated , each having efficiency more than 21% at standard test condition, fill factor more than 0.79 performance ratio equal to and greater than 78 % & made of high transmittivity glass as per NISE standard tempered and glass front surface shall give high encapsulation gain. (transmittance above 90% and bending less than 0.3%) Electrical parameters of 540/545 Wp solar PV module under STC of irradiance 1000 W/m2 , AM 1.5 Spectrum at temperature 25° C will be as under or higher :-Min Peak power Pmax : 540/545 Wp or higher, Current at Pmax Ipm : 12.97A Voltage at Pmax Vpm : 41.65 Volt Short circuit current Isc : 13.85 A Open circuit voltage Voc : 49.50Volts , Maximum series fuse rating : 30A (i) Rated output of modules shall have positive tolerance of minimum 3% & no negative tolerance is allowed. (ii) It shall perform satisfactorily in relative humidity 100% with temperature -35° C to +35° C (Cell) and should withstand wind 198 Km/Hr on the surface of the panel. (iii) PV modules must be warranted for their output peak watt capacity, which shall not be less than 90% of the initial value at the end of 10 years and 80% of the initial value at the end of 25 years. (iv) The temperature co-efficient for the module shall be suitable for CHUMATHANG (UT Of Ladakh) climatic conditions. Variation of higher capacity Solar PV panel is permissible subjected to that performance parameter of the panel shall be equal or better than given above.v) PV module must confirm to latest edition of IEC 61215/IS14286 and as specified here-in- after in particular specification In addition, the modules must confirm to IEC 61730 Part-I & II for construction and testing & safety qualification. (vi) It shall also in conformity of latest technical specifications issued by MNRE from time to time (vii) Provision of earthing & earth strip/cables etc. for earth for solar PV module/Array etc. as per latest IS/MNRE norms to be provided and the cost of the same is to be included in this item and no extra amount will be paid to the contractor on this account.Notes: On SPV (i) The specifications and capacities of plant equipments shall be designed to confirm and achieve the minimum of efficiency and performance guarantees as laid down in this bid documents. These design details and other technical details shall be submitted by contractor on commencement of contract as early as possible but not later than one month(ii) The installed system should be such that during the day, the power needs should be first met by Solar energy. In case the solar energy production is less than the required, the deficit power should be pulled from the exsiting DG set supply .(iii)The contractor shall obtain the approval of make for the proposed SPV module from accepting officer complete system of 825 KWp Solar photo voltaic (SPV) (iv) Any necessary item required for functioning of SPV but not catered in the contract will be deemed to be included in the quoted rate and nothing extra will be admissible on this account 18 .(v) Site clearance incl removal of boulders to a distance 250 m to 500m to be carried out before execution of work. Amount required for site clearance is deemed to be inclulded in the amount quoted by Contractor against this item. Contractor is advised to visit the site before quoting the rate. (vi) Country of origin for solar cell & PV module must confirm to ALMM APPROVED LIST OF MNRE.(B) String array combiner/Junction Boxes: Supply & fix suitable Numbers of dust, vermin and waterproof Array string array combiner/Junction Boxes and main junction boxes made of FRP/Thermo Plast with IP65 protection in compliance with IEC62208 and shall be sunlight /UV resistant a well of fire retardant including over voltage protection, surge protection and maintenance free earthing as per relavant standard. The string array combiner/Junction boxes shall have suitable arrangement of followings:(i) Strings are required to be connected to the busbar through individual fuses. Provide arrangement fordisconnection for each of the groups (ii) Provide a test point for each subgroup for quick faultlocation & to provide group array isolation. (iii) Each array junction box will have suitable by pass &reverse blocking diodes for maximum DC blocking voltage of 1500V with suitable arrangement for its connection. Reverse blocking & by-pass diodes shall work for temperative extreames & shall have efficiency of 99.98% conformed by appropriate IEC standard. Note:- String array combiner/ junction box shall be carried out as per approved SLD.(C) Cabling : (i) Supply and fixing suitable size of XLPO insulated copper cable as per load of solar grade, 1800 V DC/1100 V AC or higher DC voltage rating, confirming to TUV 2 pfg 1169/08.2007 PV1F and latest IEC codes & IS codes for Solar Cables. (ii) All cables and connectors for use of installations shall be of solar grade which can withstand harsh environment conditions including high temperature, UV radians, rain. humidity, dirt, burial and attack by moss and microbes for 25 years and voltage as per latest IEC/IS in standards. (iii) All cables/wires shall be provided with UV resistance printed copper ferrules for DC side. (iv) Size of cable from PV module to invertor shall be minimum 6 sqmm 1 core multistranded copper UV protected solar cable to be provided. (v) Cable Batch No./Drum No., IS code & size make should be printed/embossed at every one metre. (vi) The wiring of modules interconnection shall be in suitable size GI/HD pipe. (vii) Size of wire - 3.70mm dia with tolerance limit (+/ -) 0.08mm. (viii) Size of aperture - 80mm x 100mm (ix) Woven double twisted, hexagonal shaped Zn + PVC coated wire mesh type 80 x 100mm of wire 3.70mm dia wire as per IS 16014. The wire used for the manufacture of wire mesh shall have minimum tensile strength of 350N/mm2 and elongation shall not be less than 10% in accordance with IS 16014.To be laid in DWC pipe of suitable size. (xi) Solar inverter to ACB Panel, connection aluminium XLPE conductor cable of size 185 sqmm x 3C 1.9/3.3 KV rating Note : Cost of interconnecting copper cable (AC & DC), Al XLPE cable from Solar Invertor to ACB panel and cable tray above upto inverter and LT panels and upto LT side of transformer as per site requirement at the location as directed deemed to include in the item quotated rates and no extra payment will be made to contractor on this account. LT Panel shall be paid seperately. 19 (D) Module Mounting Structure (MMS) : Supply, design & fixing support structure MS hot dipped galvanised (80Micrones) including PCC 1:2:4 type B-1 for each support / foundation for civil works (excavation and earth work cutting, grouting, PCC etc.) and fixing the mouting arrangement suitable for PV solar modules & to withstand minimum horizontal wind speed of 198km/hr. The mounting structure is of mild steel hot dipped galvanised. The array structure shall be so designed that it will occupy minimum space without sacrificing the output from Solar PV panels. Nut bolts, supporting structures including module mounting structures shall have to be adequately protected from atmosphere and weather prevailing in the area. All fastners shall be of stainless steel of grade SS316. Two numbers of anti-theft fasteners of stainless steel on two diagonally opposite corner of each module shall be provided.Note: (i) Cost of interconnecting copper cables along with cable trays ( floor/ wall mounted ) suitable to accommodate solar grade cables & cables upto inverter is included in the item and no extra payment will be made to contractor. (ii) The module mounting structure shall be carried out as per approved drawing of foundation MMS. MMS foundation shall be designed as per IS 456:2000 and IS 13920:2016 and drawings shall be approved by GE before execution. (iii) The MMS stub/column,rafter,purlin ,ties and bracing members shall conform to following indian standard :IS 2062 -Hot rolled medium and high tensile structural steel ,IS 811-Cold formed light gauged structural steel section ,IS 1161-steel tube for structural purposes, IS4923- Hollow steel section for structural use. Minimum grade of steel sections for conforming to IS 811 and IS 4923 shall be E350 conforming to IS 2062 and Yst 310 conforming to IS 1608 respectively.(E) Lightning Protection for PV Array :- Supply & fix Lightning Arrestor of the required number of suitable Early Streamer Emission (ESE) lightning arrestors installed in the array field. Lightning arrestors/surge arrestors shall conform to IEC 60099-4 or IS:3070 except to the extent modified in the specifications. Arrestors shall be of hermetically sealed units, self-supporting construction, suitable for mounting on lattice type support with the following :-(i) The air terminal should be capable of racking the lightning stroke 60 micro seconds earlier as compare to passive lightning rod. (ii) The air terminal is Early Streamer Emission (E.S.E.) type which shall be fixed at the top of a GI elevation pole with base so as be at least 2 meters above the structure to be protected. Its height above roof level would be dependent on the level of protection and the protection radii required (iii) The air terminal should be working on the principle of early streamer emission using non-radioactve technology, needing no external power source. (iv) The air terminal is of stainless steel and it has qualified diameter to resist high values of lightning currents. (v) Roof connecting pipe should be capable of withstand in lightning strikes having dimension 50mm ID and 60mm OD. The terminal adaptor having inner dia 60mm OD. Lightening protection shall be provided as per approved Drg. 20 (F) Earthing system for PV array field :-Earthing system shall comply with latest revision andamendment of the relevent IEC standard and IS codes. (i) All PV module ,module mounting structure (MMS) and string monitoring unit (SMU) structures in the PV erray field shall be connected to the earthing system (ii) Each PV module frame shall be earth using copper wire of sufficient cross section area. Earthing complete with copper earth plate electrode 600×600 ×3.15 mm thick electrode, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level connected to 20x3 mm copper strip as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and 40mm dia GI pipe light grade for protection of earth strip and 20mm dia meduim grade for water funnel with wire mesh complete connected to earthing test point as per SSR Part-I 2009 all as specified and directed including testing on completion.NOTE:- Cost of all Copper plates earthing equipments including Copper earth strips from equipments to earth pit is deemed to be included in quoted rates.(G) Solar Inverter : Supply, fixing, testing and commissioning of minimum of suitable capacity in suitable Nos as per 250/255 KW (Total capacity of Inverters shall not be less than 750/755 KW after derating with three inverter) for CHUMTHANG 50 Hz , 3 phase 800V,185A Grid Connected Solar inverter outdoor type suitable to convert DC power of solar PV module/array to AC for further feeding to stepup transformer conforming to IEC-61683 for efficiency, IEC-62109(1&2) or equivalent for safety & IEC-62093 for reliability. The input D.C. tech specification of inverter are as under and as per approved design.(i) Operating temperature :-40ºC to + 35ºC,(ii) Relative humidity (Non condensing) upto 95%.(iii) The inverter shall consist of associated control, protection, data loging device and remote monitoring hardware. the inverter shall be suitable for operation at Chumathang .Alt 4200 mtr and min - 40ºC temperature.(iv)The inverters shall have minimum protection to IP65 and minimum European efficiency 99% load as per IEC 61683 standard.(v) The inverter shall adjust voltage and frequency levels to suit the existing DG Sets/AC power supply. (vi) The inverter shall be self-commulated with pulse width modulation (PWM) technology and shall be capable of synchronize maximum within 1 minute.vii) Maximum power point tracker (MPPT) conforming IEC- 62093 shall be integrated in the inverter to maximize energy drawn from the solar PV array. (viii) The inverter shall include appropriate self protection & self diagnostic feature to protect itself and the PV array from the damage in the event of inverter component failure or from parameters beyond the inverters safe operating due to internal or external causes. 21 (ix) Inverter shall have protective arrangement against ground leakage faults, over voltage & over current. (x) Inverter shall have arrangement for adjusting DC input current & shall trip against sustainable fault down stream and shall not restart till fault is rectified. Notes: (i) If the solar inverter as specified here-in-before is not available in the market , contractor will provide the same of higher capacity as available in the market without any extra cost. (ii) All suitable size of copper cables as per load requirement from SPV systemto inverter for interconnection purpose shall be provided by the contractor and deemed to be included in quoted rates. (iii) Cost of all Copper plates earthing equipments including Copper earth strips from equipments to earth pit is deemed to be included in quoted rates.(H) Uninterrupted power supply(UPS) : Supply, installation, testing & commissioningof 110V/40A Float Cum Boost Battery Charger unit includingbattery bank comprising 50 Nos of 2 Volts-65 AH sealed maintenance free battery.The CCCV battery charger consisting ofcopper wound,air cooled transformer, 01 Set single phase full wave bridge rectifier consisting ofdiodes andSCRs, liberally rated mounted on heat sink andcomplete with resistor/condenser network for surge supperssion .During auto float mode automatic changeover shall take place from float mode to boost mode and vice versa, 01 Set of solid state constant potential controller to stabilize the DC output voltage of the float cum boost charger, 01 No electronic controller , DCdigital ammeter,DC digitalvoltmeter, Potentiometer , DC, MCB for reverse battery protection . The charger should have alarm annunciation with visual and audible alarm with manual reset facility forfuse fail alarm. Float cum boost battery charger and DC distribution board shall be housed in powder coated sheet steel cubicle with panels of 1.6mm thickness , louvers for ventilation , gland plate will be provided for cable entry from bottom .The battery charger shall be divided into two compartments.The upper compartment shall house the battery charger & DCDB with all necessary controls. The lower compartment shall be suitable for housing the batteries. Tech specification shall be as under:-(a) Input working voltage-180 -270 Volts(b) Nominal Input Voltage - 230 V , AC , 50 Hz,1 (c) On load input power factor- > 0.8 (d) On load unit watt efficiencies-> 80%(e) No load losses of complete charge-< 10% (f)Ripple contents on the load (RMS)= 1% to 5% (g) Over load - 110% for 30 minutes and will give visual indication for over load condition. (h) Boost charging - 2.4 V/Cell . (j)Float charging -2.15 V/Cell (k)Float cum boost charging-Automatically changes from one state to another state as per battery condition and will give the visual indication for either float or boost based on charging mode. (l)Reverse polarity -No damage will caused .A visual indication for reverse polarity will appear with an audio alarm. (m)Short circuit-MCB protecton provided. Make of battery charger. Statcon/Sinetrac/Amar Raja Make of batteries. Exide/Amaron/Okaya(n) The battery bank system shall be designed to supply power to following loads :-(i) SCADA(ii) Inverter auxillairy supply 22 (iii) Capacity of battery bank shall be done considering the above mention load at power factor of 0.8 lagging inclusive of 10% design margin at 50ºC.Note:- All suitable size of copper cables as per load requirement for interconnection to above loads here-in-before shall be provided by the contractor and deemed to be included in quoted rates(J) DATA ACQUISITION SYSTEM/PLANT MONITORING & SCADA :- Supply,fixing,testing and commissioning of SCADA system Monitoring system with 65 inch Screen at site with Local LDMS and for Remote Monitoring 55 inchs screen in Engineer-in-charge office to be provided for the performance of the SPV on cloud. plant, inverter ,power, array voltages, array currents & AC parameters,energy yield, temperature,irradiance level etc. and it could provides flexible interface to facilitate PC based inverter monitoring and control via GPRS modem and internet/ethernet connection. This should have include web visualization system and data logger with integrated ethernet port. (i) Data acquisition System shall be provided for each of the solar PV plant. (ii) Data Logging Provision for plant control and monitoring, time and date stamped system data logs for analysis with the high quality, including latest version available of PC & Printer. Metering and Instrumentation for display of systems parameters and status indication to be provided (iii) Solar Irradiance: An integration Pyranometer/Solar cell based irradiation sensor (along with calibration certificate) provided, with the sensor mounted in the plane of the array. Readout integrated with data logging system. (iv) Temperature: Temperature probes for recording the Solar Panel temperature and ambient temperature to be provided complete with readouts integrated with the data logging system.(v) The parameters like AC Voltage, AC Output current, Output Power, Power factor, DC Input Voltage, DC Input Current, Time Active, Time disabled, Time Idle, Energy Produced, Protective function limits (Viz-AC Over voltage, AC Under voltage, Over frequency, Under frequency ground fault, PV starting voltage, PV stopping voltage etc are accessible via the operating interface display in real time separately for solar power plant. (vi) All major parameters available on the digital bus and logging facility for energy auditing through the internal microprocessor and read on the digital front panel at any time and logging facility (the current values, previous values for up to a month and the average values) should be made available for energy auditing through the internal microprocesor and should be read on the digital front panel. (vii) PV array energy production: Digital Energy Meters to log the actual value of AC/DC voltage, Current & Energy generated by the PV system provided. Energy meter along with CT/PT should be of 0.5 accuracy class. (viii) Computerized DC String/Array monitoring and AC output monitoring shall be provided as part of the inverter and /or string/array combiner box or separately (ix) String and array DC Voltage, Current and Power, Inverter AC output voltage and current (All 3 phases and lines), AC power (Active, Reactive and Apparent), Power Factor and AC energy (All 3 phases and cumulative) and frequency shall be monitored. (x) Computerized AC energy monitoring shall be in addition to the digital AC energy meter. 23 (xi) The data shall be recorded in a common work sheet chronologically date wise. The data file shall be MS Excel compatible. The data shall be represented in both tabular and graphical form (xii) All instantaneous data shall be shown on the computer screen. (xiii) Provision for Internet monitoring and download of data including recharging shall be also incorporated till the duration of contract. (xiv) Software shall be provided for USB download with life time license and analysis of DC and AC parametric data for individual plant (xv) Remote Server and software for centralized Internet monitoring system shall be also provided for download and analysis of cumulative data of all the plants and the data of the solar radiation and temperature monitoring system. (xvi) Ambient /Solar PV module back surface temperature shall be also monitored on continuous basis. (xvii) Simultaneous monitoring of DC and AC electrical voltage, current, power, energy and other data of the plant for correlation with solar and environment data shall be provided. (xviii) Remote Monitoring and data acquisition through Remote Monitoring System with latest software/hardware configuration and service connectivity for online/real time data monitoring/control complete to be supplied and operation and maintenance/control to be encurred by the supplier. Provision for interfacing these data on Engineer-In-Charge Computer/display device and portal.NOTE:- The cost of all equipments , internet, ethernet connections, connected cables, Server, printer etc. are included in this item All licensee of windows server, MS office or any other software required for functioning of SCADA is deemed to be included in quoted rates for life time. Recharge of GPRS/3G/4G/5G network for 5 yrs from date of completion shall be reponsibilty of contractor and rates quoted are deemed to include the same. Training: On successful commissioning of the plant, training shall be provided on Plant operations and maintenance to a team (Engineers and Technician/Operations) as nominated by GE for 07 days at the time of handing over of solar plant after completion of phase-I.K) WEATHER MONITORING SYSTEM : Complete one set for Chumathag As a part of weather monitoring system the contractor shall provide the following measuring instruments with all necessary software and hardware required to integrate with SCADA.(i) Pyranometer : The contractor shall provide minimum 04 Nos of secondary standard pyranometer (ISO 9060 classification alongwith necessary assessories for measuring incidental solar radiation at horizontal and inclined plane of array. Specificiation of the pyranometer shall be asfollows:- Spectral response : 0.31 to 2.8 micron ,Time response (95%) : Max 15 second ,Nonlinearity ± 0.5% ,Temperature response : ± 2% ,Tilt error <± 0.5% ,Zero offset thermal radiation ±7W/Sqm ,Zero offset temperature change ± 2 W/Sqm ,Operating temperature range O ºC to 80ºC ,Non stability Maximum ±0.8% ,Resolution minimum +/- 1 W/Sqm : Output Analog 4-20 mA, ,Digital RS 485 Each instruments shall be supplied with necessary length of cable calibration certificate with calibration ,traceability to world radiation reference(WRR) or world radiation centre shall be furnished alonwith the equipments.The GE reserves the right to check the calibration at the expense of the contractor. 24 The signal cable length shall not exceed 20 m .The contractor shall provide instrument manual in hard and soft form.(L) Protection switch gears: Supply, installation, testing and commissioning of factory made outdoor type, LT panel weather & vermin proofsuitable for 3 phase 415 V made out of 3.15 mm thick with internal partition of 1.6 mm thick MS sheet duly powder coatedand both sides openable with lockingarrangment and aluminium busbar of capacity not less than 2000 Amp, outdoor type , frame factory fabricated , duly powder coated painting having thickness not less than 100 microns provided suitable gasket, suitable for 3 Phase4 wire, 415 Volts, 50 Hz, AC supply system, including the following :- (a)ACB 1250 Amps capacity adjustable type , 4 pole 50 KA, 800 V, 50 HZ draw out type breaking capacity 50 KA( Icu=Ics=Icw=50KA) microprocessor protection. (b) MCCB 400 A, 4 pole, 415 volts, 50 Hz - 03 Nos (C) Bus bar chamber with and including aluminium strip (set 4 Nos) suitable for 800 V duly moounted on porcelain insulators -01 Set (d) Digital amp meter 3 ph programmeable type with suitable1600 Amps -01 Set (e)Digital volt meter 3 ph programmeable type with suitable0- 800 volts -01 Set (g) CT 1250/5A/5A, PT 100VA CL 0.5/3P (h) LED phase indicator (RYB )-01 Set. All DC & AC circuits shall be suitably protected using appropriate circuit breakers and isolators, fuses and relays annunciator & system condition displays. Protection switchgears on AC side shall have LT ACB 1250 Amps capacity adjustable type , 4 pole 50 KA, 800 V, 50 HZ draw out type breaking capacity 50 KA( Icu=Ics=Icw=50KA) microprocessor protection based with overload ,short circuit over voltage, under voltage, over frequency , under frequency , earth fault and instantaneous over current protection unit , electrically operated with manual spring charge facility , having indication for earth /over load /overvoltage/ under voltage/ over frequency/ under frequency complete with digital meter. Note:- Panelshall be provided as per approved SLD.(M) Cable Duct / Conduit DWC Pipe : Cable duct/ cable tray of appropriate size from solar panel to inverter/ transformer and cable duct made from PCC etc incl MS plates duct cover 6 mm thick (plain orchequered) channels square cut or notched ( ordinary & counter sunk) forming holes without any attachment complete all as spd and directed.Note: (a) There should be provision of vertical separation between power and control cable duct. (b) Cable ductshall be provided as per approved drg . 25 Supply, installation testing and commissioning of outdoor type step up transformer Inverter duty type low losses of 1 MVA, 0.800/11KV, 3 phase, 50 HZ, ONAN Cooled oil immersed copper wound out door type Step up Transformer delta/delta (Δ/Δ) complete with first oil filling and other standard fitting / accessories and Off load tap changer (Taping Range ± 5% in step of 2.5% each) suitable for feeding supply generated from solar power plant to existing transmission line with Including the following : 26 HV Bushing 33 KV and LV Cable Box suitable for chumathang area of Alt 4200 m along with necessary bus bars with adaptor box suitable for terminating incoming cables from inverter. Marshalling Box (having TTB Only ) all as specified and directed (i) Buchholz Relay trip contact and shut off valves. (ii) PRVRelay Trip (iii) Oil temperature indicator 150 mm dia with alarm and trip contact. (iv) Winding temperature indicator with alarm and trip contacts (v) Marshalling box 200 TB (MK) -03 Nos (6 No of terminal , 3 phase primary and 3 phase secondary, Bolted or plu in type terminal, cable entry 3X 50 sqmm (primary) and 3 X 120 sqmm (secondary) cable ties, clips or trays ) (vi) Magnetic oil level gauge. (vii) Pressure release valve (PRV) with trip contacts.(viii) Conservator with oil filling hole with cap and drain plug and wit built in diaphragm to avoid direct air contact with transformer oil. (ix) Oil level indicator with minimum level marking.(x) Thermometer pockets with thermometer. (xi) Silica gel breather (xii) Air Release plug. (xiii) Lifting Lugs (xiv) Earthing terminals (xv) Bi-directional Rollers (xvi) Anodized aluminum rating and diagram plate. (xvii) Off load Tap changer including indoor remote control panel. (xviii) Top filter valve (xix) Including transformer platform as per OEM recommendation is deemed to be included in quoted rates.Following protections shall be integrated with RMU Necessary equipments/metering devices shall be instaled in transformer.(a) Instantaneous overcurrent (b) AC time over current (c) Neutral & residual instantaneous over cuurent (d) Neutral & residual time overcurrent (e) master trip (f) anti pumping (g) trip circuit supervision (h) DC failure (i) WTI and OTI (j) pressure relief (k) Buchholz (l) Differential protectionNOTE:-The following works /items shall deemed to be included in the above quoted rates and no extra payment shall be made to the contractor on this account. (i) The erection /installation of transformer with suitable size of foundation as per OEM recommendation is deemed to be included in quoted rates (ii) Rates quoted is inclusive of all control cables of suitable size and core(as per manufacturer recommendations) from buchholz relay, PRV, OTI & WTI of power transformer to various controls ie CTS/PTs & HT panel and control panels. (iii) LT single core cable /LT bus bar of suitable size and capacity from LT panel to step up transforemers LT side including appropriate size of cable lugs as required at site for connection complete all as specified and directed. (iv) The step up transformer shall be suitable for inverter input to avoid/reduce/capable for odd harmonics and heat losses. 27 Supply, installation testing and commissioning of outdoor type distribution low losses as per Level II part I (IS:1180) of 1.25 MVA, 0.415/11KV, 3 phase, 50 HZ, ONAN Cooled oil immersed copper wound out door type Step up Transformer delta/star (Δ/Υ) (complete with first oil filling and other standard fitting / accessories and Off load tap changer (Taping Range ± 5 % in step of 2.5% each) suitable for feeding supply generated from solar power plant to existing transmission line with Including the following : 28 HV bushing and LV Cable Box along with necessary bus bars with adaptor box suitable for terminating incoming cables frominverter. Marshalling Box (having TTB Only ) all as specified and directed (i) Buchholz Relay with alarm and trip contact and shut off valves. (ii) Oil temperature indicator 150 mm dia with alarm and trip contact. (iii) Winding temperature indicator with alarm and trip contacts (iv) Marshalling box 200 TB (MK) -03 Nos (v) Magnetic oil level gauge. (vi) Pressure release valve (PRV) with trip contacts. (vii) Conservator with oil filling hole with cap and drain plug and wit built in diaphragm to avoid direct air contact with transformer oil. (viii) Oil level indicator with minimum level marking. (ix) Thermometer pockets with thermometer. (x) Silica gel breather (xi) Air Release plug. (xii) Lifting Lugs (xiii) Earthing terminals (xiv) Bi-directional Rollers (xv) Anodized aluminum rating and diagram plate. (xvi) Off load Tap changer. (xvii) Top filter valve (xviii) Differential relay protection for power transformer Following protections shall be integrated with RMU Necessary equipments/metering devices shall be instaled in transformer.(a) Instantaneous overcurrent (b) AC time over current (c) Neutral & residual instantaneous over cuurent (d) Neutral & residual time overcurrent (e) master trip (f) anti pumping (g) trip circuit supervision (h) DC failure (i) WTI and OTI (j) pressure relief (k) Buchholz (l) Differential protectionNOTE:-The following works /items shall deemed to be included in the above quoted rates and no extra payment shall be made to the contractor on this account. (i) The erection /installation of transformer with suitable size of foundation as per OEM design is deemed to be included in quoted rates .(ii) Rates quoted is inclusive of all control cables of suitablesize (as per manufacturer recommendations) from different relays buchholz relay of power transformer to various controls ie CTS/PTs & HT panel and control panels. (iii) LT single core cable /LT bus bar of suitable size and capacity from LT panel to step up transforemers LT side including appropriate size of cable lugs as required at site for connection complete all as specified and directed. (iv) The transformer shall be suitable for inverter input to avoid/reduce/capable for odd harmonics and heat losses. 29 Supply, installatioon , testing and commissiooning of factory made outdoor type 4 Way 2x630 Amp SF6 + 2x630Amp LBS out door type 11 KV Ringmain Unit with Space Heater at Altitude 4200m, 630 Amps IAC 20 KA for 3 sec suitable for solar power system confirming to relevant IS/IEC, LSC 2B having following specification and comprising of following:- (i) Electrolytic copper bus bars, droppers and bus bar should be insulated with full system voltage sleeves. Each SF6 breaker shall comprise of following 30 (ii) Trolly mounted vaccum circuit breaker as per IEC-62271-100 SF6 circuit breaker should have three Nos resin encapsulated vaccum bottles.(iii) Motorized spring charging mechanism 230V AC 50 Hz with integral spring charging handle for manual spring charging. (iv) Cast resin current transformer 11KV, 200/1-1A, Core-I: class 1.0, 5VA, core2:5P10,5VA.Bushing shall be of 11 KV (v) Cast resin potential transformer 11KV/√3/110V, 50VA, class 0.5Cl 3P, bushing shall be 11KV KV and HT fuse at the primary end and 4P MCB at secondary end of PT. (vi) Accessoories like local/remote switch, breaker control switch (T-N-C) space heater with thermostat, DC and AC control circuit through MCB, indicating lamps for RYB, spring charge, DC supply healthy, breaker ON/OFF , breaker in SERVICE/TEST. (vii) Multifunction meter with RS 485 port , on MODBUS Protocol. (viii) Digital ammeter and digital voltmeter. (ix) Master trip relay-01 No and Aux relay TCS, DC Fail, OC & E/F (x) Comprehensive numarical protection relay on MODBUS protocol compatiable for directional and non directional O/C, E/F, U/V, O/V protection, Pressure switch or gas density monito, Frequency relay, Breaker failure protectionTransfomer protection Bucholz protection, PRV,Differential protection, OTI, WTI Relay and panel should have following additional facilities:- (xi) Trip Ckt supervision, AC fail, DC fail (xii) Disturbance recorder. (xiii) Event log with date and time (xiv) Measurment and control feature (xv) Fully internal arc type tested. (xvi) SF6 bottles should be epoxy encapsulated. (xvii) Racking in/out, manual closing/tripping of CB with compartment door closed. (xviii) Breaker shall be provided with following contacts:- (xix) Auxilary switch with 6 No + 6 NC mounted on the draw out portion of the switchgear. (xx) Position switch with 3 NO + 1NC contacts for eachposition in SERVICE and TEST.(xxi) 16 window annunciater with hooter/alarm for OC,SC,OV,UV,TCS,DC Fail, AC Fail OTI,WTI,PRV,Bucholz, Differential, OF, UF, Gas density low, Breaker failure protection 31 Material and Labour for Earthing complete with GI earthplate electrode 600mm x 600mm and not less than 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to GI strip of size 32x6mm by means of bolts, nuts, check nuts and washers of GI/steel all as shown in electric plate No 3 connected to equipmentscomplete and including char coal dust & salt filling in alternate layers (each layer shall be 15 cm thick)and GI protection pipe, medium grade 40mm dia and GI watering pipe 20mm, medium grade with funnel and wire mesh, 40mm thick pre-cast RCC, M-15 (nominal mix) cover reinforced with XPM weight not less than 4kg/sqm with suitable handle of 6mm dia MS bar and angle iron 40 x 40 x 3mm frame for cover, PCC M-15 (nominal mix) pit, excavation and earth work in any type of soil and connectedcomplete all as specified and directed. 32 Material and Labour for earthing complete with and including copper earth plate electrode 600 mm x 600 mm x 3.15 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected to copper trip earth lead wire 25x6 mm dia by means of nuts, bolts, checknuts and washers made out of galvanised iron, 15 mm bore (light grade) GI pipe for protection of earthing lead, 20 mm bore (light grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 pit and 50 mm thick RCC M-25(Design mix) reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 3 of SI Part-I. 33 Material and Labour for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr belowground level connecting to galvanisedearth lead wire 4mm dia by means of bolts,check nuts and washers and earth lead protected by provision of GI pipe light grade 15mm bore including provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 KG/Sqm) and frame of angle iron 25 X 25 X 3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge plate, common salt and charcoal filling, connecting to test pointwith fixing arrangement, funnel, wire mesh and earth work in hard/dense soil,returning filling in and removal of surplus soil to a distance not exeeding 50 mtr, all as per electrical plate No 3all as specified and testing on completion. Note :- Cost of earth lead upto 7.5 mtr and GI 15mm bore pipe is deemed to be included in unit rate. 34 Supply, installation, testing and commissioning of factory made, DG disribution cum DG syncronization panel of suitable size, outdoor type made out of CRCA sheet 3.15 mm thick with partition of 1.6 mm, frame factory fabricated with front and back openable double door with locking arrangement, with MS angle section 50x50x6 mm support, duly powder coated painting having thickness not less than 100 microns provided suitable gasket to make it dust and vermin proof, suitable for 3 Phase4 wire, 415 Volts, 50 Hz, AC supply system,comprising of following :- (a)Distribution panel with ACB 2500Amp microprocessor release operation type, 415 Volt 50 KA 1 Nos 2500 Amp ACB (b) DG Synchronizing panel- DG Sync Panel with double busbars required for sync 3 nos 400 KVA DG set after Sync Power fed to 2500 Amp Distribution Panel (c)Control Ckt require for DG Sync With PV System, Logic of this control ckt : DG 1, 400 KVA on all time with minimum 30% load and when load increase 80% DG2 400 KVAstart and so on for all 3rd Nos 400 KVA DG) Note: DG syncronization panel shall be provided as per approved SLDcomplete all as specified and directed.. 35 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1.9/3.3 KVgrade, cross-sectional area 400 Sqmm 3 core for solar ACB panel to inverter duty transformercomplete all as specified and directed. 36 Supply and fixing of cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrinkable type joint complete with jointing meterial and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size400 Sqmmcomplete all as specified and directed. 37 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 400 Sqmm 3.5 corecomplete all as specified and directed. 38 Material and Labourfor Sand cushing to under ground cable, provided with 8 cms thick layer before laying the cable and 15 cm thick after laying and streching the calbe complete all as specified and directed. 39 Supply and laying unreinforced precast concrete cable cover on the cable in the trench,classl LV, Type-I, flat size 250mm X150mmX50mm(1100 volts LT cable)complete all as specified and directed. 40 Supply and laying Unreinforced precastconcrete cable coveron the cable in the trench , class HV, Type-I, flat size 300mm X180mmX50mm (for 11KV HT cable)complete all as specified and directed. 41 Material and Labour for Solar HT Generation meter AC three phase, multifunction net meter of accuracy class 0.5s, rated voltage 110 V Ph-Ph or 3 X 63.5 V Ph-N, voltage range + 15% to - 30% of rated voltage, basic current 1 Amps or 5 Amps, maximum continuous current 2 times (200%) of basic current , starting current 0.1% of basic current, frequency 50 Hz and operating frequency range 47.5 to 50.5 Hz , IP 65 protection, Protection: over voltage, over current, over/ under grid frequency, over temperature, short circuit. with optical & RS232 port, backlit LCD display, (measures import kWh, kVAh, Export kWh, kVAh , Net kWh, kVAh, V,I, kW, 6 month history of energy, load survey, tamper detection & logging, power On/Off events, instantaneous parameters of rating -/5A with display in absence of powercomplete all as specified and directed. 42 Shifting of DG set of capacity 3 x 400 KVA from location Upper and lower chumathang (Upto 2 Km) near to SPV plant location with all connected items including installation, connection with cable, making of suitable size as per existing 3 Nos PCC plateform of 400 KVA DG set all as per specified and directed 43 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 630 Sqmm 3.5 corecomplete all as specified and directed. 44 Material and Labour for Rolling and consolidation formation surface in cuttingto required camber and gradient with 8 to 12 tonne power roller complete all as specified and directed. 45 Material and Labour for soiling (or Sub Base) 200mm thick (Spread thickness) with broken boulders or quarred stone interstices filled, surface formed and surface formed and rolled and consolidated torequired gradient and camber with 8 to 12 tonne power roller, complete all as specified and directed. 46 Material and Labour for cement concrete work in pavement/hardstanding of flexural strength 40 kg/sqcm in field using 400 kg of cement per Cum for thickness of concrete 20 cm including brooming the surface complete all as specified and directed. 47 Material and Labour for forming contraction (Dummy) joints 80mm deepx 10mm wide filled with sealing compound grade B complete all as specified and directed. 48 Material and Labour for forming 20mm thick expansiion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade B for 200mm thickness of concrete slab complete all as specified and directed. 49 Material and Labour for 150mm thick (compacted thickness) WMM in two equal layers 75mm thick each layer with coarse aggregates of lime stone, sand stone flint or quartizite of grading 2 (63 to 40mm size) spread, rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller complete all as specified and directed. 50 Material and Labour for Cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in foundation filling and mass concretecomplete all as specified and directed. 51 Material and Labour for Cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in benching, coping around poles (aove GL) etc including weathering slightly rounded or chamfered angles and fair finshing the exposed surfaces or concrete using extra cement cmplete including necessary form workcomplete all as specified and directed. 52 Supplying, installation, commissioning and testing of transformer step down 11/0.415KV capacity750 KVA, Level II, IS 1180 Part I, out door type copper wound 3 phase, 4 wire, 50 cycles per second, oil immersed naturally cooled external cooling tube core type delta connection on primary side (HV side) and star connection on secondary side (LV side) having tapping 0,± 2.5%, ±5%, ±7.5% to be charged by means of hand operated, off load/tap changing gear including first filling of new transformer oil of dielectric strength not less than 60 KV with standard fittings such as two earting terminals for body and one additional for neutral brought out inbushing, oil level gauge indicator for level minimum and maximum, lifting lugs, rating and termina plate, plain breather device to prevent ingress of rain water and inserts, drain cum sampling valve 20mm bore steel with plug,dial type thermo meter, oil filling hole 32mm threaded with plug. The transformer shall be powder coated for water/dust and vermin proof. Note :- (1) Transformer oil shall be conforming to requirements of IS-335-1983 specification for newinsulating oil for transformers.(2) Equipment shall be suitable to operate at 4200 mtr above MSL at temperature variation between -35˚C to (+)35˚ C including platform as per OEM recommendation is deemed to be included in quoted rates (For lower Chumathang) 53 Supplying, installation, commissioning and testing of transformer step down 11/0.415KV capacity400 KVA,Level II, IS 1180 Part I, out door type copper wound 3 phase, 4 wire, 50 cycles per second, oil immersed naturally cooled external cooling tube core type delta connection on primary side (HV side) and star connection on secondary side (LV side) having tapping 0,± 2.5%, ±5%, ±7.5% to be charged by means of hand operated, off load/tap changing gear including first filling of new transformer oil of dielectric strength not less than 60 KV with standard fittings such as two earting terminals for body and one additional for neutral brought out inbushing, oil level gauge indicator for level minimum and maximum, lifting lugs, rating and termina plate, plain breather device to prevent ingress of rain water and inserts, drain cum sampling valve 20mm bore steel with plug,dial type thermo meter, oil filling hole 32mm threaded with plug. The transformer shall be powder coated for water/dust and vermin proof. Note :- (1) Transformer oil shall be conforming to requirements of IS-335-1983 specification for newinsulating oil for transformers.(2) Equipment shall be suitable to operate at 4200 mtr above MSL at temperature variation between -35˚C to (+)35˚ Cincluding platform as per OEM recommendationis deemed to be included in quoted rates (For additional pocket & Upper chumathang)complete all as specified and directed. 54 Material and Labour for Steel tublar swaged poles erected truly vertical or planted as strut complete with 6 mm thick mild steel base plate, welded to pole, B-118 final taper cap,bolts,nuts & screws, poles made out of ERW MS tubing conforming to IS 2713 Part-II. Type 410-SP-55 (11 m long) including drilling of holes of required size for fixing of cross arms, paintin g the exposed surfacs of pole with two coats of aluminium paint over a coat of two coats of zinc chrome3 primer and two coats of black bitumenous paint internally & portion embadded in concrete, making five black & white bands at lower portion of pole each 300 mm wide alternatley, and marking pole No. with black paint at suitable height complete all as specified and directed.(For two/ four pole structure) Note :- Excavation and earth work, PCC in foundation shall be measured and paid for separetely.complete all as specified and directed. 55 Material and Labour for Switch air break gang opertated tripple pole mechanically operated from ground level mounted, outdoor type suitable for vertical instatllation single break provided with locking arrangement for operating handle with lock consisting of mild steel channelHT post top insulator copper alloy high pressure assembly 33 KV grade complete with all accessoriescomplete all as specified and directed. 56 Supply & fixing lightning arrestor, high tension, polymer type gapless complete with all fitting transmission class, of capacity 33 kilo voltscomplete all as specified and directed. 57 Material and Labour forCross arms, bracing , supports, clamps and aback plates ,fabricated out of structural steel sections incuding nuts, bolts,washers,welding,bending cold or hot, drilling holes for bolts in any shape or size as indicated or coat of red oxide zinx chrome primer, one under coat and one finshing coat of aluminium paint complete all as specified. 58 Supply, laying, testing and commissioning of aluminium conductor, XLPE insulated, PVC inner sheathed, GI strip or wire armoured & overall PVC sheathed cable of 11 KV (Earthed) grade in trenchesl/ in GI pipe including dressing and clamping the cable with MS clamps of cross section area 185 Sqmm 3 corecomplete all as specified and directed. 59 Supply, laying, testing and commissioning of aluminium conductor, XLPE insulated, PVC inner sheathed, GI strip or wire armoured & overall PVC sheathed cable of 11 KV (Earthed) grade in trenchesl/ in GI pipe including dressing and clamping the cable with MS clamps of cross section area 120 Sqmm 3 corecomplete all as specified and directed. 60 Supply and fixing of cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrinkable type joint complete with jointing meterial and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size120 sqmm to 185 sqmmcompleted all as specified and directed. 61 Material and Labour for ACSR conductor for the provision of HT OH lineof sizes,3 of 6/1X3.0 (Ferret), 3 of 6/ 1x2.59 ( weasel) completed all as specified and directed. 62 Material and Labour for galvanised steel wire of4 mm dia with hooks stretching kinks and bends completed all as specified and directed. 63 Anticlimbing devices spikes type fabricated out of MS bars (round square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole complete all as specified and shown on drawings. 64 Supply and fixing pin type 10 KN polymer type, porcelain, viterous white, brown or green insulator including one mild steel spindle,for 33000 volts grade incl all accessories for fixing of pin insulator completed all as specified and directed. 65 Supply and fixing disc type 90 KN polymer type, porcelain, viterous white, brown or green insulator including one mild steel spindle,for 33000 volts grade incl all accessories for fixing of disc insulator completed all as specified and directed. 66 Supply and fixing of Danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letter, figures and conventional skull and bones in signal red colour and fixed with M.S clamps, bolts and nuts of approved size, for HT,25x20cm sizecomplete all as specified and directed. 67 Material and Labour for Galvanised steel tubing light grade 80 mm bore laid in trenches orfix to wall/hole with fitting as required for cable protectioncomplete all as specified and directed. 68 Material and Labour for Galvanised steel tubing light grade 100 mm bore laid in trenches orfix to wall/hole with fitting as required for cable protectioncomplete all as specified and directed. 69 Material and Labour for stay assembly complete using stay rod of 20 mm dia complete with accessories as shown in electric plate no 1 of SSR-2009 Part -I complete all as specified and directed by Engr-in-Charge Note: (Unit rate quoted by contractor herein before also includes earth work and PCC work ,Loop type insulator ,stay clamps ,nuts ,bolts ,washers and concretecomplete all as specified and directed. 70 Material and Labour for galvanised stay strand, size 7/4 mmcomplete all as specified and directed. 71 Supply and fixing of loop type porcelain vitreous white ,brown or green insulator large size with overall dimensions 90x140 mm,clearance of hole 25.5 mm complete all as specified and directed 72 Supply and install LT panel outdoor type weather & vermin proofsuitable for 3 phase 415 V made out of 3.15 mm thick MS sheet duly powder coatedand both sides openable with lockingarrangment and aluminium busbar of capacity not less than 2200 Amp insulated with PVC sleeves and coloured with (R,Y,B and Black) with angle iron frame for stand made out of40 x 40 x 6mmincludingfour legs grouted by using PCC (1:2:4) type B 1 with 20mm graded stone aggregate thimbling andcable entry box incl connection and necessary fixing arrangement complete all as specified anddirected by Engineer in Charge. 73 Under composion of following.(LT panel No-01 Lower Chumathag)(i)ACB 415 V, 4 pole, 1600 Amp, 50 KA -01 No (Incoming)(ii) ACB 415 V, 4 pole, 800 Amp, 50 KA -01 No (Outgoing)For existing DG panel (iii) ACB 415 V, 4 pole, 800 Amp, 50 KA -01 No (Outgoing)For existing DG panel(iv) Bus bar chamber with and including aluminium strip (set 4 Nos) suitable for 2500 Amps duly moounted on porcelain insulators -01 Set (v) Digital amp meter 3 ph programmeable type with suitable2500 Amps -01 Set (vi)Digital volt meter 3 ph programmeable type with suitable0- 500 volts -01 Set (vii) LED phase indicator (RYB )-01 Set 74 Supply and install LT panel outdoor type weather & vermin proofsuitable for 3 phase 415 V made out of 3.15 mm thick MS sheet duly powder coatedand both sides openable with lockingarrangment and copper busbar of capacity not less than 1250 Amp insulated with PVC sleeves and coloured with (R,Y,B and Black) with angle iron frame for stand made out of40 x 40 x 6mmincludingfour legs grouted by using PCC (1:2:4) type B 1 with 20mm graded stone aggregate thimbling andcable entry box incl connection and necessary fixing arrangement complete all as specified anddirected by Engineer in Charge. 75 Under composion of following. (LT Panel No-2 upper chumathang)(i)ACB 415 V, 4 pole, 800 Amp, 50 KA -01 No (Incoming cum outgoing) (ii) Bus bar chamber with and including aluminium strip (set 4 Nos) suitable for 1200 Amps duly moounted on porcelain insulators -01 Set(iv) Digital amp meter 3 ph programmeable type with suitable 800 Amps -01 Set(v)Digital volt meter 3 ph programmeable type with suitable 0-500 volts -01 Set (vi) LED phase indicator (RYB )-01 Set 76 Supply and install LT panel outdoor type weather & vermin proofsuitable for 3 phase 415 V made out of 3.15 mm thick MS sheet duly powder coatedand both sides openable with lockingarrangment and copper busbar of capacity not less than 1250 Amp insulated with PVC sleeves and coloured with (R,Y,B and Black) with angle iron frame for stand made out of40 x 40 x 6mmincludingfour legs grouted by using PCC (1:2:4) type B 1 with 20mm graded stone aggregate thimbling andcable entry box incl connection and necessary fixing arrangement complete all as specified anddirected by Engineer in Charge. Under composion of following. (LT Panel No-3 upper chumathang additional pocket) 77 (i)ACB 415 V, 4 pole, 800 Amp, 50 KA -01 No (Incoming)(ii) MCCB 415 V, 4 pole, 200 Amp, 25 KA -1 No (Out Going), MCCB 415 V, 4 pole, 400 Amp, 36 KA -1 No (Out Going) MCCB 415 V, 4 pole, 100 Amp, 25 KA -1 No (Out Going)(iii) Bus bar chamber with and including aluminium strip (set 4 Nos) suitable for 1250 Amps duly moounted on porcelain insulators -01 Set (iv) Digital amp meter 3 ph programmeable type with suitable 800 Amps -01 Set (v)Digital volt meter 3 ph programmeable type with suitable 0-500 volts -01 Set (vi) LED phase indicator (RYB )-01 Set 78 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 300 Sqmm 3.5 core complete all as specified anddirected 79 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 240 Sqmm 3.5 core complete all as specified anddirected 80 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 185 Sqmm 3.5 core complete all as specified anddirected 81 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 core complete all as specified anddirected 82 Supply and fixing of LED Street light of 70 Watt , IP66 power coated pressure die cast aluminium housing with high efficiency LED as lighting source and toughened glass complete all as specified anddirected 83 Supply and install LT panel box outdoor type weather & vermin proofsuitable for single phase 230 V made out of 3.15 mm thick MS sheet duly powder coatedand both sides openable with lockingarrangment and aluminium busbar of capacity not less than 100 Amp insulated with phase indicator incl angle iron frame for stand made out of40 x 40 x 6mmincludingfour legs grouted by using PCC (1:2:4) type B 1 with 20mm graded stone aggregate thimbling andcable entry box incl connection and necessary fixing arrangement complete all as specified anddirected by Engineer in Charge. Under composion of following.(For Street light)(i) MCB SPN 6-32 Amps, 230V, 10 KA -01 No (Incoming)(ii) MCB SP 6-10 Amps, 230V, 10 KA -02 No (outcoming)(iii) Bus bar chamber with and including aluminium strip ( 2 Nos) suitable for 100 Amps duly moounted on porcelain insulators -01 Set (iv) LED phase indicator (RYB )-01 Set 84 Supply and fixing GI bracket 1.2 m long made out of GI pipe 40mm dia mediam grade with necessary clamp for fixing nut and bolts and connection complete all as specified anddirected 85 Material and Labour for Steel tublar swaged poles erected truly vertical or planted as strut complete with 6 mm thick mild steel base plate, welded to pole, B-118 final taper cap,bolts,nuts & screws, poles made out of ERW MS tubing conforming to IS 2713 Part-II. Type 410-SP-31 (09 m long) including drilling of holes of required size for fixing of cross arms, paintin g the exposed surfacs of pole with two coats of aluminium paint over a coat of two coats of zinc chrome3 primer and two coats of black bitumenous paint internally & portion embadded in concrete, making five black & white bands at lower portion of pole each 300 mm wide alternatley, and marking pole No. with black paint at suitable height complete all as specified and directed.Note :- Excavation and earth work, PCC in foundation shall be measured and paid for separetely. 86 Supply and fixing of 2.5 sqmm copper conductor cable for street light connection from junction box to street light at pole all as specified and directed by Engr-in-charge 87 Supply and fixing of junction box made out of PVC box with necessary clamps for fixing busbar with MCB SP 6 Amps and necessary connection from street light to junction box with 2.5 sqmm x 3C copper conductor cable complete all as specified anddirected 88 Material and Labour for Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching completely surrounding pipes with concrete after they laid and tested for 150 mm bore NP 2 pipe, complete all as specified and directed. 89 Material and Labour forM&L for Reinforced concrete pipes,class NP2,dia 150 mmlaid and jointed complete with collars complete all as specified and directed. 90 Material and Labour for PCC 1:2:4 Type B1 using 20 mm garded stone agg as in coping including weathering slightly rounded or chamfered angles and throating complete all as specified and directed. 91 Supply onlyliquid water proofing compoundcomplete all as specified and directed. 92 Material and Labour forTMT bars 10mm dia and over , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia, or securing with clips, rungs, handles completeall as specified and directed. 93 Material and Labour forprecast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in manhole coverslabsincluding necessary formworks set in cement mortar 1:4 complete all as specified and directed. 94 Material and Labour for cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in surface channel and inside drains of manhole complete all as specified and directed. 95 Material and Labour for Mild steel rungs and handle made to shape out of 16mm dia round barsconforming to Fe-290grade E-165including fixing/embedding in concrete /masonrypainted with two coats of bituminous paint complete all as specified and directed. 96 Extra forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified and directed. 97 Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exc 200mm thick (horizontal or sloping) for flat fair finished surfaces complete all as specified and directed. 98 Material and Labour for construction of septic tank for 10 users designed to carry sewage and sewage water, excavation in any type of soil, PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregates in foundation, precast cement concrete block masonry wall, RCC cover slab complete all as specified and directed and shown on drawing. 99 Material and Labour for construction of soakage well with excavation in any type of soil complete all as specifiedand directed and shown on drawing. 100 Material and Labour for MS work as in posts and struts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. 101 Supply only chain link MS galvanised fencing any size or type complete all as specified anddirectedNote : weight of chain link fencing shall be checked by BOO detailed by GE. 102 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards rails straining bolts etc including provision of binding wire complete all as specified and directed. 103 Material and Labour for prepration of new or previously untreated steel surface & priming with red oxide primer and applying two coats of synthetic enamel paint of any description over 10cm width or girth not otherwise described complete all as specified and directed. 104 Material and Labour for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. 105 Material and Labour for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 22.5cm longand diameter of neck 11 to 15mm complete all as specified and directed. 106 Material and Labour for construction of steel gate 5.5m wide and 3m high with RCC pillars including excavation and earth work and all other relevant works complete all as specified and directed. 107 Excavation over area not exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed. 108 Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out inhard/dense soil. Complete all specifed and directed. 109 All as per Srl No. 94. above but exc 1.5 m or part there ofin depth beyond the first 1.5m complete all as specified anddirected 110 Excavation in post holes (or similar holes) each not exc 0.5 Cum getting out returning filling and ramming earth or broken rubble mixed with earth around in layers not exc 25cm watering and removing surplus soil to a distance not exc 50 and making good surface in hard/dense soil complete all as specified and directed. 111 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed . 112 Removing excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. 113 Removing excavated rocks material from site n exc. 50 m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified anddirected
Contract Date: Jun 20, 2026 Contract Value : ₹ 6.14 Crore
Statutory Bodies & Commissions/Committees No of Bidders 9
Ladakh View Result →
10.
Power #10889839 AOC
Bids Are Invited For Portal Monitoring System , Radiation Survey Meter Total Quantity : 4
Contract Date: Ref. Documents Contract Value : ₹ 7.12 Crore
Boards / Undertakings / PSU No of Bidders 1
Tamil Nadu View Result →
11.
Science and Technology #10888763 AOC
Bids Are Invited For Radiation Survey Meter (Q3) Total Quantity : 1
Contract Date: Ref. Documents Contract Value : ₹ 6.75 Lakh
Government Departments No of Bidders 7
Gujarat View Result →
12.
Defence #10882935 AOC
Bids Are Invited For Radiation Survey Meter (Q3) Mse Total Quantity : 2
Contract Date: Ref. Documents Contract Value : ₹ 12.03 Lakh
Government Departments No of Bidders 1
Delhi View Result →
13.
Defence #10869153 AOC
Bids Are Invited For Radiation Analyser , Radiation Survey Meter Total Quantity : 1
Contract Date: Ref. Documents Contract Value : ₹ 24.10 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Karnataka View Result →
14.
Educational and Research Institute #10734365 AOC
Notice Inviting Etender For Procurement Of Equipment, Instruments, Machineries, Tools Charts Etc. Related To Laboratories And Workshop Of Engineering Institute For Junior Executives, Dalalpukur, Howrah-711104-1 Dead Weight Pressure Gauge Tester • Bourdon Tube Pressure Gauge As Manometer • Manometer With Transparent Scale • Manufactured From Corrosion Resistant Materials • Components Arranged On Base Plate. • Set Of Weights • Medium For Transmitting Pressure: Hydraulic • Capacity Of 25Kg / Cm2 • The System Is Nickel Chrome • The Weights Are Zink Iron ) 2 Cut Section Model Of Hermetically Sealed Compressor 3 Universal Bevel Protractor ( Accuracy: 0.01 Mm Material: Stainless Steel Diameter: 70 Mm Size: 300 Mm Type: Analog Graduation 5 Min Straightness .00016+ ( .00005Xl / 2 ) ) 4 Cut Section Model Of Lamont Boiler 5 Slip Gauge Set; Special Set ( M87 ) , Grade I, High Grade Steel, 9 Mm Wide & 30-35 Mm Long Cross Section. 6 Utm Machine ( Material:Ms Voltage:220 V Phase: Single Phase Capacity: 10 To 100 Ton Cross Travel: Up To 1000 Mm Weight: 1500 Kg ) 7 Mollier Chart Flex ( 40 × 30 ) 8 Teak Wood; Wood For Pattern Shop Size: 2×1×6 9 Thermal Conductivity Of Metal Rod; • Frame: Made Of M.S. Square Tubes & Sheets, Welded & Powder Coated • Optional Accessories: Rotameter For Water Flow Measurement • Electric Heater : Clamp Heater, Capacity 200 W, Supply 230 V Ac • Insulation Jacket: Made Of Mild Steel, Mild Steel Rod Is Insulated By Asbestos Powder • Diameter Of Metal Rod 25 Mm, Length Of Rod 300 Mm 10 Cut Section Model Of Screw Type Rotary Air Compressor 11.01 Chart Of Velox Boiler With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.02 Chart Of Mollier Diagram With Labelling ( Size: 23’’ X 36’’, Material: Pvc, With Roller ) 11.03 Chart Of T-T-T Diagram With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.04 Chart Of Utm Machine & Sample With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.05 Chart Of Torsion Testing Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.06 Chart Of Iron-Carbon Equilibrium Diagram With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.07 Chart Of Vernier Caliper With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.08 Chart Of Vernier Height Gauge With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.09 Chart Of Thread Measurement With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.10 Chart Of Gear Tooth Vernier Caliper With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.11 Chart Of Hermetically Sealed Compressor With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.12 Chart Of Domestic Refrigerator With Labeling ( Size:30× 40, Material: Pvc, With Roller ) 11.13 Chart Of Full Pressure Engine Lubricating System With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.14 Chart Of Constant Mesh Gear Box With Labeling ( Size:30× 40, Material: Pvc, With Roller ) 11.15 Chart Of Synchromesh Gear Box With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.16 Chart Of Components Of A Chasis With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.17 Chart Of Knuckel Joint With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.18 Chart Of Intersection Of A Prism And Cone ( Size:30× 40, Material: Pvc, With Roller ) 11.19 Chart Of Projection Of A Straight Line In Different Quadrants ( Size:30× 40, Material: Pvc, With Roller ) 11.20 Chart Of Plummer Block - Details And Arrangement ( Size:30× 40, Material: Pvc, With Roller ) 11.21 Chart Of Centrifugal Pump With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.22 Chart Of Balanced Type Vane Pump With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.23 Chart Of Bent Axis Piston Pump With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.24 Chart Of Lathe Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.25 Chart Of Single Point Cutting Tool Geometry With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.26 Chart Of Screw Jack Assembly With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.27 Chart Of Cotter Joint Assembly And Design With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.28 Chart Of Vertical Drilling Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.29 Chart Of Shaper Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.30 Chart Of Safety On A Lathe Machine ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.31 Chart Of Safety On A Milling Machine ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.32 Chart Of Safety On A Shaper Machine ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.33 Chart Of Safety In Carpentry Shop ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.34 Chart Of Safety In Fitting Shop ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.35 Chart Of General Precaution In Workshop ( Size:30× 40, Material: Pvc, With Roller ) 11.36 Chart Of Cnc Turning With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.37 Chart Of Elements Of Jigs ( Drill Bushes ) With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.38 Chart Of Tig Welding With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.39 Chart Of Mig Welding With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.40 Chart Of Engine Cooling System With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 12 Digital Lab Trainer ( Bread Board Model ) ( Built-In Dc Regulated Power Supply; At Least 8 Logic Input Switches; At Least8 Output Led; Pulse Generator For Clock Frequency ; Patch Chords ) 13 Arduino Uno Board ( Atmega328 ) 14 Experimental Kit To Study Pam, Pwm And Ppm Modulation And Demodulation ( Pulse Generator With Variable Frequency And Amplitude, Pam Modulator And Demodulator, Pwm Modulator And Demodulator, Ppm Modulator And Demodulator ) 15 Ujt Trainer Kit With P.S. & Patch Cord 16 Led Colour Tv Demonstration Kit ( Display Type: Led, Hd: Screen Size: 24: Connectivity: Usb, Hdmi, Av: Test Points To Be Present Minimum 10 Nos.: Switched Faults To Be Provided: Product Tutorial Should Be Present ) 17 Microwave Oven Demonstration Trainer Kit ( Type: Solo: Capacity: 17 Ltr.: Control Type:Mechanical: All Circuits & Panels To Be Mounted On-Board: Test Points To Be Provided To Analyze Signals: Instruction Manual To Be Provided ) 18 Washing Machine Demonstration Trainer Kit ( Application: Lab Experiment: Semi-Automatic: Tank Capacity: 6.5 Kg: Block Diagram & Circuit Diagram To Be Mounted On The Lid: Test Points To Be Provided ) 19 Mobile Communication Trainer Kit To Study Various Signalling And Fault Insertion Techniques ( Gsm Handset Trainer Kit.  Operate Both On Windows And Linux Platform  Usb Interface For Communication  Best Suitable For Iot Gateway Application  External Connector To Interface With Any Microcontroller  Easy Understanding Of At Commands  Real Time Operation  Built In Network Status Led  Audio Interface Connector  Simple / Easy Operation  External Antenna  Application Module Relay Interface For Ac Device ( Optional ) ) 20 Trainer Kit For Mobilephone Set To Study Transmitter And Receiver Sections In Mobile Handset And Measure Frequency Band Signal ( Real Time Mobile Operation # Full Understanding Of Mobile Phone Working # Frequency Measurement And Band Verification # Provides Study Of All Sections In Mobile Phone # Tx / Rx Frequency Measurement # 3G / 4G Technology And Gmsk Signals # Gsm Data Rate # Detail Study Of User Interface Control Signals # Detail Study Of Sim Operation # Battery Identification And Charging Study  Switched Faults 21 Consumable ( 9V Battery, Cro Probe, Digital Ics ) 22 Cro ( 20 Mhz , Dual Trace, Dual Channel ) 23 Trainer Kit For Mobile Phone ( Features : The Experimental Kit Will Be Capable I ) To Study General Block Diagram Of A Mobile Phone. Ii ) To Study Mobile Transmission Section. Iii ) To Study Mobile Reception Section. Iv ) To Study Different Nos. Of Faults Provided With The Trainer. V ) To Study & Observe Voltages / Waveforms Of Each Test Points. Vi ) To Study Mobile Charging Circuits. Vii ) To Use Mobile Phone As Modem For Using At Commands As Given; A ) Sending Text Messages, Read / Delete Massages Etc. B ) Calling To A No, Reject / Accept The Incoming Calls Etc. C ) Gprs Related Commands. Study Of Bluetooth Technology & Connection With Other Bt Devices. Bluetooth Profiles : Bip, Bpp, Dunp, Ftp, Hid, Opp , Sap, A2dp, Pbap, Spp Etc. To Study General Idea Of Sim Card. ( Local Sim Card Must Be Inserted By The User At The Time Of Experiment ) . ) 24 Salt Bath Furnace For Heat Treatment ( • Resistance Heating ( Element ) • Operating Temp.: Up To 1200°C • Digital Temp. Controller ( Pid ) • Chamber Size : 450Mm X 300 Mm X 300 Mm • Furnace Uniformity + / - 2°C • Temp Recorder With 2 Channel Placed At Opposite Sides • Salt For Use With Two Times Top Up • Spare Heating Element 2Pc ) 25 In-Situ Metallography Kit ( • Items: Portable Grinder / Polisher, Grinding Discs, Lapping Cloths, Diamond Pastes, Aerosol Spray, Replication Film, Paste, Reflector And Gumming Tape For Excellent Contrast Or Transparent Replica - Film Thickness - 125 Microns, 30 Microns, Replica Liquid, Glass Slides ) 26 Automatic Electrolytic Polishing Machine ( • Function: Fully Automatic Electrolytic Polishing And Etching With Automatic Scanning Function • Preparation Time: Within 30 Sec • Electrolyte For Low / High Alloyed Steels & Aluminium • Pump And Magnetic Stirrer • Integrated Cooling System ) 27 Micro-Hardness Tester ( • Test Load : 10, 25, 50, 100, 200, 300, 500, 1000 Gm • Scale: Knoop & Vickers • Dwell Time: 5-90 Seconds Settable • Objectives : 10X, 20X, 40X, 60X • Loading And Unloading : Motorized • Measurement – Automatic And Or With Manual Micrometer Eyepiece. • Traverse: Automatic And Or Manual With Micrometer. • Focusing - Motorized Focusing With Manual Over-Ride • Computerized Imaging Attachment, Dedicated Software To Measure Hardness On Computer With Report Generation Facility • Accessories: Sheet Holder, Wire Holder, Hardness Test Block, Bulb, Indenter. ) 28 Cracked Aluminum Test Block ( For Penetrant Sensitivity Checking In Dpt ) ( Aluminum Test Piece That Measures 3 X 2 X 3 / 8 With A 1 / 8 Wide With A Milled Notch That Separates The Blocks Two Sides To Facilitate Side-By-Side Penetrant Comparison. The Test Block Is Used To Check The Strength Of “In-Use” Penetrants. This Is Done By Processing One Half Of The Block With “Used” Penetrant, And The Other Half With Fresh Penetrant. Can Be Used To Compare Sensitivity Of Different Penetrants Or Sensitivity Of New And Old Penetrants. Complies With Astm E165 And Asme Boiler And Pressure Vessel Code Section V & Iii, And Mil-I-23135-C. ) 29 Pie Gauge / Magnetic Flux Indicator ( To Be Made From Eight Ferrous Segments, Braised Into A Single Piece, Providing A Star Pattern Of Nonferrous Discontinuities. Eight Linear Discontinuities To Provide Indications In All Directions Non-Ferrous Handle With Pivot. Specification Compliance • Mil-Std-271 • Astm E709 ) 30 20Mhz Analog Cro ( Dual Trace ) , Bandwidth:- Dc ~ 20Mhz ( -3Db ) Y Deflection:- 5Mv / Div ~ 10V / Div. Rise Time:- <18Ns，Mag _70Ns ：17.5Ns. Max Input:- 400V ( Dc+Acp-P ) 31 50Mhz Digital Storage Oscilloscope, Bandwidth 50Mhzreal-Time Sampling Rate 500 Msa / S, Equivalent Sampling Rate 50Gsa / S.Memory Depth: 32Kptstrigger Types: Edge, Pulse Width, Video, Slope, Alternativeunique Digital Filter Function And Waveform Recorder Function, Max Input:- 400V ( Dc+Acp-P ) 32 3D Model Showing Different Parts Of A Coal Fired Thermal Power Station 33 3D Model Showing Different Parts Of A Gas Fired Thermal Power Station 34 3D Model Showing Different Parts Of A Diesel Power Station 35 3D Model Showing Different Parts Of A Nuclear Power Station 36 3D Model Showing Different Parts Of A Hydro-Electric Power Station 37 3D Model Of Boiler Showing Its Different Parts Used In Coal Fired Thermal Power Station 38 3D Model Of Boiler Showing Its Different Parts Used In Nuclear Power Station 39 3D Model Of Water Turbine Showing Its Different Parts, Used For Hydro-Electric Power Plant 40.1 Colour Flex Chart Describing Different Parts Of A Coal Fired Thermal Power Station Size:30× 40, Material: Pvc, With Roller 40.2 Colour Flex Chart Describing Different Parts Of A Gas Fired Thermal Power Station Size:30× 40, Material: Pvc, With Roller 40.3 Colour Flex Chart Describing Different Parts Of A Diesel Power Station Size:30× 40, Material: Pvc, With Roller 40.4 Colour Flex Chart Describing Different Parts Of A Nuclear Power Station Size:30× 40, Material: Pvc, With Roller 40.5 Colour Flex Chart Describing Different Parts Of A Hydro-Electric Power Station Size:30× 40, Material: Pvc, With Roller 40.6 Colour Flex Chart Describing Different Parts Of Boiler, Used In Coal Fired Thermal Power Station Size:30× 40, Material: Pvc, With Roller 40.7 Colour Flex Chart Describing Different Parts Of Boiler, Used In Nuclear Power Station Size:30× 40, Material: Pvc, With Roller 40.8 Colour Flex Chart Describing Water Turbine Showing Its Different Parts, Used For Hydro-Electric Power Plant Size:30× 40, Material: Pvc, With Roller 41 3-Phase Induction Motor Speed Control Using Pwm Inverter For Interpreting Speed-Torque Characteristics Using Vvvf Drive 42 Ups Trainer Kit ( 1Kva ) Output Voltage : 230 V Ac Nominal, Input Voltage : +12V Dc Battery. Capacity : 1Kva, Output Frequency : 50 Hz Accuracy : + 5%. Switching : Automatic. 43 Smps Trainer Kit Incl. ±5V, ±12V Input Voltage: Ac 100 – 264V 50 / 60Hz Output Voltage: 12V Dc, 0-5A Output Voltage: Adjustment Range: ±20% Protections: Overload / Over Voltage / Short Circuit Auto-Recovery After Protection Universal Ac Input / Full Range 100% Full Load Burn-In Test Cooling By Free Air Convection High Quality And High Performance Led Power Supply With A Metal Body For Hidden Installation For Led Lighting Design With Built-In Emi Filter, Improve Signal Precision. Certifications: Ce & Rohs No Minimum Load. Compact Size Light Weight. High Efficiency, Reliabiltiy & Low Energy Consumption Controller: Satandard 44 Commutation Kit Of Scr ( Class A To F ) Completely Self – Contained Stand – Alone Unit. Demonstrates The Principle And Various Methods Of Forced Commutation Of Scr. 1. Self-Commutation By Resonating Load ( Class “A” Method ) . 2. Self-Commutation By An L C Circuit ( Class “B” Method ) . 3. Complimentary Commutation ( Class “C” Method ) . 4. Auxiliary Commutation ( Class “D” Method ) . 5. External Pulse Commutation ( Class “E” Method ) . * Supply Required 230V, 50Hz Ac. * Built-In Ic Based Dc Regulated Supply And Led Indication For Supply “On”. * Built-In Load Facility In The Form Of Led’S. * Connecting Each Circuit Separately And Verifying Its Principle. * Multicoloured Test Points Are Provided To Observe The Waveform And Voltages. * Set Of Required Number Of Patch Cords. * Housed In An Elegant Cabinet With A Well Spread Intelligently Designed Circuit Layout Engraved On The Front Panel. * Strongly Supported By A Comprehensive Instruction Manual Complete With Theory And Operating Details. 45 Colour Flex Chart Describing Single Line Diagram Of A Given Distribution System ( Lt & Ht ) Size:30× 40, Material: Pvc, With Roller 46 Colour Flex Chart Describing Short Transmission Line ( 220Kv ) Size:30× 40, Material: Pvc, With Roller 47 Colour Flex Chart Describing Medium Transmission Line ( 220Kv ) ( Both T & Π-Model ) Size:30× 40, Material: Pvc, With Roller 48 Power Factor Improvement Kit Using Static Condenser Including Load R-L Load Of At Least 2Kva With Appropriate Capacitor Bank. 49 Setup For Load Test On 1-Ph Induction Motor: Load Test Kit Of 1-Ph Induction Motor ( 1Hp, 230V, 50Hz ) 50 Loading Test Kit Of 3-Phase Alternator: ( 2Kw, 415V, 50Hz ) With 3-Ph R-L Load Box Coupled To A Dc Motor; Capable To Perform As Synchronous Motor Test With Dc Generator Load; Integrated With All Required Measuring Instruments 51 Speed Control Kit Of Stepper Motor Including Reversing Arrangement With 8051 Microcontroller: Stepper Motor Of Appropriate Capacity To Be Served By 8051Μc 52 Speed Control Kit Of Ac Servo Motor: Motor Spec: 3000Rpm, 200W, 0-240V, Control Torque: Standard With All Needed Accessories 53 Speed Control Kit Of Dc Servo Motor: •Voltmeter Vdc 3.5 Digit. 200Mv •Rpm Indicator For Speed Measurement •Voltmeter Vdc 3.5 Digit 20V Power Supply: •Ic Regulation In Controller Circuit Power Supplies •Operated On Mains Power 230V, 50Hz +10% Features: •Position Control Of A 12 Volt, 1 Amp Dc Geared Pm Motor ( 50 / 60 Rpm ) •Calibrated Dials With 1 Degree Resolution For Reference And Output Position •Two 360 Degree Servo-Potentiometers •Built In Step Signal •Built In Waveform Capture / Display Card For Study Dynamic •Electronic Techogenerator For Feedback •Non-Contact Eddy Current Break For Load •Speed Control Of 12V, 4W, Permanent Magnet Dc Motor •Speed Range Up To 3000 Rpm ( Typical 54 Mcb Test Kit For Performing Load Test: Kit Should Be Able To Perform Short-Circuit, Over Load, Thermal Trip Test For Mcb With Rating Upto 30A 55 Dismantled Elcb & Rccb Kit For Demonstration Purpose: Elcb: Single Phase 2 Pole Elcb, Rccb, Isi Marked 32A Mcb With High Voltage, Overload Protection, Current 3 To 30 Ma Rccb: Breaking Capacity 10 Ka, Frequency, 50 Hz, Number Of Poles 2P, Operating Characteristics: Ac Rated Current 40 A, Sensitivity 30 Ma, Standard, Is 12640-1 & Iec 61008-4, Test Button Yes 56 Testing Kit For Percentage Differential Protection Of Transformer Using Transformer Differential Relay ( Electromagnetic / Μp Based / Static ) : Standard For Laboratory Purpose 57 Colour Flex Chart Describing Different Parts Of Acb & Vcb ( 33Kv, 15Mva ) : Size:30× 40, Material: Pvc, With Roller 58 Experiment Kit To Measure Solar Radiation Using Pyranometer On Tilted Surface At Different Angle Inclination: Standard For Laboratory Purpose 59 Colour Flex Chart Describing Different Parts Of Solar Flat Plate Collector & Solar Concentrating Collector & Trough Collector: Size:30× 40, Material: Pvc, With Roller 60 Experiment Kit To Measure Thermal Performance Of Solar Water Heating System: Standard For Laboratory Purpose 61 3D Model Describing Different Parts Of ( I ) Solar Street Lighting System & ( Ii ) 1Kw Small Wind Turbine ( Swt ) : 3D Model For Laboratory Purpose 62 Setup Of 250Wp Solar Pv Plant Including All Accessories: Solar Panel Specifications:Peak Power: 250W; Maximum Power Voltage: 20.2V; Maximum Power Current: 12.38A; Open Circuit Voltage: 23.9V; Short Circuit Current: 13.12A; Power Allowance Range: + / - 3% Hybrid Inverter Specifications: Nominal Battery Voltage: 12V; Continuous Power Output: 1000W / 1000Va; Surge Power: 2000Va Output Voltage: 230V Ac; Output Frequency: 50Hz / 60 Hz; Output Waveform: Pure Sine Wave; Maximum Solar Input Power: 600W; Maximum Open Circuit Solar Input Voltage: 55V; Maximum Solar Charging Current: 50A; Maximum Mains Ac Charging Current: 20A; Maximum Combined Charging Current: 50A; Peak Efficiency: 93% Battery Specifications ( Per Battery ) : Nominal Voltage: 12V; Nominal Capacity: 50Ah ( 10H Rate ) / 55Ah ( 20H Rate ) ; Maximum Charging Current: 25A; Self-Discharging Rate: <3% Per Month; Cycle Lifetime At 30% D.O.D.: 1000-1100 Pressure Control: Safety Valve Installed Terminal Type: F13 ( Bolts And Washers Included ) Operating Temperature: From +10C To +40C 63 Setup Of Small Wind Turbine Plant Including All Accessories: Standard For Laboratory Purpose 64 Study Kit Of Assembling And Dismantling Of Csp Plant Using Parabolic Trough Or Disc: Standard For Laboratory Purpose 65 Study Kit For Assembling Vertical Axis Or Horizontal Axis Swt: Standard For Laboratory Purpose 66 Digital Lcr Multimeter: Digital Lcr Meter ( Battery Operated ) , Model: 4070 Range: 0.1Μh To 20H, 0.1Pf To 2000Μf, 0.1Ohm To 20Mohm Accuracy: 2Mh, Resolution: 1Uh, Accuracy: 20Mh, Resolution: 10Uh, Accuracy: 200Mh, Resolution: 100Uh Accuracy: 2Nf, Resolution: 1Pf, Accuracy: 20Nf, Resolution: 10Pf, Accuracy: 200Nf, Resolution: 100Pf, Accuracy: 2Uf, Resolution: 1Nf, Accuracy: 200, Resolution: ± ( 0.8 Percent+5 ) 0.1, Accuracy: 2K, Resolution: 1, Accuracy: 20K, Resolution: 10, Accuracy: 200K ( Make: Metravi ) 67 Handheld Power Meter Or Power Analyzer With Socket: Voltage: 85V-265V, Current; 0.002A~20A, 50Hz, 1-Ph 68 Analog Power Factor Meter ( 1-Ph & 3-Ph ) : Standard For Laboratory Purpose 69 Multimeter With Clamp Meter Arrangement With Hfe Lcr: Standard For Laboratory Purpose ( Make: Metravi ) 70 Three Phase Power Measurement Kit ( Y & Δ Load R-L Load ) Incl. 3-Ph Wattmeter With 2Kw Range: Standard For Laboratory Purpose 71 Kit For Troubleshooting Single Phase Electronic Energy Meter: 230V, 1-Ph, 50Hz 72 Three Phase Trivector Meter: Salient Features Class 0.5S As Per Relevant Is And Iec Standards 5A Current Rating 3 Phase 4 Wire 4 Quadrant Measurement Anti-Tamper Features Self-Diagnostic Capability Multiple Tariff / Time Of Day Feature Bidirectional Energy Recording Up To 4 Maximum Demand Registers Load Survey ( Interval Data ) Features Up To 12 Reset Backups Optical Port / Rs 232 / Rs 485 / Ir / Irda / Rf ( 2.4 Ghz / 865-867 Mhz ) ( Optional ) ( Make: L&T ) 73 Brake Test Kit Of Dc Series Motor: 220V Dc, 2Hp With Allied Required Accessories 74 Back-To-Back Test Kit Of Single Phase Transformer: 1-Ph, 240V, 50Hz, 1Kva ( 2 Nos. ) Identical Transformers With Other Standard Accessories 75 Isolation Transformer Kit: 230V; 230V / 10Amp 230V; 230V / 5Amp 76 Pulse Transformer Kit: Dc Supply: Two 5V & 12V, Pulse Generator: Two Selectable Frequency & Variable Pulse Width, Mains: 230V / 50Hz, Adequate For Cro Observations, Optocoupler: One, One Ferrite Wired 1:1 77 Colour Flex Chart Describing Different Vector Groups Of Theree Phase Transformer: Size:30× 40, Material: Pvc, With Roller 78 Full-Wave Fully Controlled Bridge Rectifier Kit With & Witout Filter Arrangement: Standard For Laboratory Purpose 79 Kit To Find The Characteristics Of Zener Diode: Standard For Laboratory Purpose 80 Kit To Find The Characteristics Of Mosfet: Standard For Laboratory Purpose 81 Ujt Relaxation Oscillator Trainer Kit: Standard For Laboratory Purpose 82 Singlestatge Transistor Trainer Kit ( Ce-Mode ) : Standard For Laboratory Purpose 83 Trainer Kit For Sr, D, Jk & T – Flip-Flop: Standard For Laboratory Purpose 84 Trainer Kit For Realization Of Encoder And Decoder Circuit: Standard For Laboratory Purpose 85 Trainer Kit For Realization Of Multiplexer And Demultiplexer Circuit: Standard For Laboratory Purpose 86 Trainer Kit For Implementing Dac & Adc: Standard For Laboratory Purpose 87 Connector Cables For Ade Lab. Of Different Types: Standard For Laboratory Purpose 88 Arduino Uno R3 Board With Lcd1602, Servo Motor, Relayes, Processing And C Code, Beginner Starter Kit With Mannual And Allied Accessories: Standard For Laboratory Purpose 89 Trainer Kit For 8051 Μc Programming: Trainer Kit For 8051 Μc Programming With Keypad To Write Program 90 Trainer Kit Using 8051 Μc For Measurement Of Ac Voltage, Current, Frequency & Phase Angle Using Suitable Ct, Pt, Zcd, Adc, Etc. 91 Demonstration Kit For Identifying Pvc, Xlpe, Vir, Catenary, Frls, Frlsh Cables / Wires Of Different Current Rattings: Standard For Laboratory Purpose 92 Megger: Insulation Tester ( 500V ) With Hand-Driven Gen.: 500V, 2500 Mega Ohms 93 Megger: Insulation Tester ( 2500V ) With Hand-Driven Gen. 2.5Kv, 2500 Mega Ohms 94 3-Ph Smart Energy Meter For Lt Power Measurement, 3-Ph, 415V, 4-Wire, Kwh Meter, Current: 10-60A, Class 1.0 Accuracy As Per Relevant Is And Iec Standards, With Lcd Display [ Make: L&T ] 95 Trainer Kit For Dc Chopper Drive With Resistive Load & Dc Separately Excited Motor. 1 / 8 Hp, 200Vdc Operation, Current Limit Protection, Speed Control Using Frequency And Duty Cycle Variation, Jones Chopper Based Control, Motor Loading Arrangement Can Be Provided / Resistive Load May Be Connected, Other Variety Of Controllers With Converter Control With Closed Loop Controller 96 Trainer Kit For Controlling The Speed Of Separately Excited Dc Motor By Changing The Firing Angle Of Scr Using 1-Ph Full Converter. Power Supplies: • Power Supply +15Vat 150Ma • Isolated Supply 0-220V At 5A. • Operated On Mains Power 230V, 50Hz +10% Digital Meters: • Voltmeter 2000V Ac • Voltmeter 2000V Dc • Ammeter 2A Dc Components Are Mounted On The Panels Are: • Scr Tyn604 ( 2 Nos. ) • Diode 1N5408 ( 2Nos. ) • Diode Ba159 • Ac Phase Control By Gate Control Firing Circuit. • Snubber Circuit. Load: • 1 / 2Hp Dc Shunt Motor. • Inductor As Load 230V, 1A • Lamp Load 230V, 60W 97 Μcontroller Based 3-Ph Syn. Motor Drive: Trainer Kit For Controlling The Speed Of Synchronous Motor ( 1Kva ) Drive Using Μc. 98 Demonstartion Kit Showing Different Types Of Power Semiconductor Devices With Heat Shink E.G. Scr, Igbt, Gto, Mosfet, Standard For Laboratory Purpose. 99 Kit For Magnetic Control Of Im: Control And Power Circuit For ( I ) Forward And Reverse Rotation Of Squirrel Cage Im Using Contactor, ( Ii ) Automatic Star-Delta Starter Of Squirrel Cage Im, ( Iii ) Dynamic Braking Of Squirrel Cage Im, Standard For Laboratory Purpose. 100 Screw Driver Set, Standard For Laboratory Purpose. 101 6” Slide Range, Standard For Laboratory Purpose. 102 Wire Stripper, Standard For Laboratory Purpose. 103 Crimping Tool ( 1 Sq. Mm. To 6 Sq. Mm. ) . 104 2.5 Sq. Mm. Stranded Pvc Copper Wire 105 1.5 Sq. Mm. Stranded Pvc Copper Wire 106 1 Sq. Mm. Stranded Pvc Copper Wire 107 Soldering Kit: 20W With Solder Material 108 Contact Type Tachometer ( Range: 0-10, 000 Rpm ) 109 Set-Up With Different Type Tl Lamps ( Conventional & Led ) With Fittings Containing Electrimagnetic Ballast / Electronic Ballast Etc.: Tl Fittings With: 1. Electronic & Electromagnetic Ballast For ( I ) Single 40W, 240V, 50Hz Tl, ( Ii ) 2X40w, 240V, 50Hz Tl, 2. 20W Led Tl With Fittings Incl. 110 3-Ph Capacitor Bank Of 2-4Kva For Correcting Power Factor Of 415V, 50Hz, 1500 Rpm, 2Hp, 3-Ph Squirrel Cage Im With Facility To Connect The Stator Of The 3-Ph Im Both In Star & Delta Mode And A Tri-Vector Meter Having Facility To Measure Kw, Kva, Kwh, Kvarh, Pf. 111 Transformer Oil Breakdown Strength Kit: Breakdown Strength Kit With 5 Ltr. Fresh Transformer Oil, Standard For Laboratory Purpose. 112 Chart For Demonstration Of Different Fire Extinguishers: Colour Flex Chart Describing Different Types Of Fire Extinguishers ( 4 X 3 ) , Material: Pvc, With Roller 113 Chart For Demonstration Of Artificial Respiration ( Cpr ) And Prepare A Report.: Colour Flex Chart Describing Different Types Of Artificial Respiration ( Cpr ) ( 4 X 3 ) , Material: Pvc, With Roller.
Contract Date: Dec 10, 2024 Contract Value : ₹ 11.21 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
15.
Defence #10627606 Price Bid
Procurement Of Medical Stores , Drugs , Radiation Survey Meter
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 1
West Bengal View Result →
16.
Educational and Research Institute #10317998 AOC
E-TENDER FOR PROCUREMENT OF EQUIPMENTs, INSTRUMENTs, MACHINERIES, TOOLS ETC. RELATED TO LABORATORIES AND WORKSHOPS OF PHYSICS, CHEMISTRY, CIVIL ENGINEERING, OF DARJEELING POLYTECHNIC, KURSEONG, DIST. DARJEELING, 734203- 1 LIST OF REQUIRED MATERIALS FOR CHEMISTRY LABORATORY 2 Buerette(Borosilicate Rotaflow 50ml) 3 Buerette stand andclamp 4 Bunsen Burner with Gas pipe 5 Wire Gauge and Stand 6 Tissue paper roll 7 Digital Conductivity meter(Desktop) 8 Redwood viscometer 9 Abels flash point apparatus 10 Pipette(Borosilicate 25ml) 11 Hand Glove 12 Spot test plate(6 cavity) 13 Filter paper - 110mm (1 roll sheet) 14 Wash bottle(Polyethylene 500 ml) 15 Muffle furnace 16 100 ml volumeteric Flask(Borosilicate) 17 Photo Colorimeter(Desktop) 18 Analytical Balance 19 Electric oven 20 Stop watch 21 Thermometer(0 -100 ˚C) 22 LIST OF REQUIRED MATERIALS FOR CIVIL ENGINEERING LABORATORY 23 AGGREGATE IMPACT VALUE(AS PER IS 2386) 24 AGGREGATE CRUSHING VALUE TEST(AS PER IS 2386, PART 4 40 T CAPACITY) 25 FLAKINESS INDEX &ELONGATION(AS PER IS2386 SPECIFICATION) 26 COMPLETE ABSOLUTE VISCOSITY TEST APP CONFIRMING TO IS 1206, PART II-1978(AS PER IS:1206, PART II) 27 PENETRATION TEST APP FOR BITUMEN(AS PER IS:1203 -1978, 220V, CAPACITY 50 & 100 Gm) 28 RING AND BALL APPARATUS(AS PER IS 1209 - 1978) 29 REBAR LOCATOR(DIM 120 X 60 X 25 mm) 30 CONCRETE CORE CUTTER(45L CAPACITY, DRILL DIA 132MM, VOL 93 X 35X 24 mm) 31 REBOUND HAMMER(IMPACT ENERGY 2.207 Nm, WEIGHT 5770 gm, RANGE 75mm) 32 BERNOULLIES THEOREM APPARATUS(MS SUMP TANK 80L, MEASURING TANK 10L, ISI MARK GI PIPES & CONTROL VALVE) 33 VENTURIMETER APPARATUS(SLUMP TANK 200 X 500 X 300 mm, 0.5 HP PUMP, COLLECTION TANK 500 X 500 X 600 M) 34 Piezometer with necessary apperantunces(Piezometer with Head Tank 300x300x450mm, measuring tank 300x300x300mm, Sump tank 600x600x300mm,0.5 HP Pump, Connecting pipes with necessary fittings and valves.) 35 U Tube differential Manometer with necessary apperantunces(U Tube differential Manometer Head Tank 300x300x450mm, measuring tank 300x300x300mm, Sump tank 600x600x300mm,0.5 HP Pump, Connecting pipes with necessary fittings and valves.) 36 Bourdon’s Gauge for measuring water pressure(Head Tank 300x300x450mm, measurement tank 300x300x 300mm, Sump tank 600x600x300mm,0.5 HP Pump, Connecting pipes with necessary fittings and valves.) 37 Pipe Friction Apparatus(Capacity 0.5HP, Sump Tank Capacity 1200 x 300 x 400 mm) 38 Pitot tube(Pitot Tube- Material Copper/SS of compatible size,Sump Tank 1200 x 300 x 400 mm) 39 TURBITY TEST APPARATUS(200 NTU, DIGITAL, LED DISPLAY, 230 V, 50 HZ) 40 APPARATUS FOR SUSPENDED SOLIDS DISSOLVED SOLIDS AND TOTAL SOLIDS IN WATER(HM DIGITAL, LCD DISPLAY, 357 A POWER) 41 HARDNESS TEST OF WATER APPARATUS(AE-201-40, 5-0.1-2 MG/L) 42 CHLORINE CONTENT DETERMINATION TEST APP(DPD METHOD, AE-201-0.1-2MG/L) 43 ARSENIC CONTENT DETEERMINATION TEST APP(5202 AS PER BP) 44 FLUORINE CONTENT DETERMINATION (AS PER BP) 45 PH METER(AS PER BP ) 46 JAR TEST APPARATUS(As per IS-3025(Part 50):2001 - Digital Jar test withJar capacity 1000ml, 30 to 150 RPM ) 47 PYCNOMETER BOTTLE(1L CAPACITY) 48 VANE SHEAR TEST APPARATUS(SPRING SET OF 2 KG-CM, 4.6 & 5 KG -CM) 49 VENIER TRANSIT THEODOLITE WITH TRIPOD STAND(MAGNIFICATION = 30 X FOCAL LENGTH =178MM) 50 QUICK SETTING DUMPY LEVEL WITH TRIPOD STAND(MAGNIFICATION = 24 X ANGLE OF VIEW = 2,BRAND =SOKIA) 51 PRISMATIC COMPASS WITH TRIPOD STAND(DIAMETER = 120 mm, DISPLAY = ANALOG) 52 PLANE TABLE WITH ACCESSORIES WITH STAND(TABLE SIZE= 23 X 32, MATERIAL = WOOD/ ALUMINUM/ BRASS, BRAND = SAPPHIRE) 53 GPS INSTRUMENT(GARMIN GPS 64sc SITE SURVEY, Handheld, SCREEN SIZE 2.5 inch ) 54 30m measuring METRIC TAPE ( Fibreglass)(Materials = rubber printing +ABS Plastic +PVC (Fibre glass) , Length = 30 m) 55 DIGITAL WEIGHING SCALE(Capacity of 20kg, with accuracy of 0.1gm) 56 DIGITAL WEIGHING SCALE(Capacity of 5 kg, with accuracy of 0.001gm) 57 LIST OF REQUIRED MATERIALS FOR PHYSICS LABORATORY 58 Boyle’s law apparatus complete set (With Mercury) 59 Stoke’s law apparatus for determining viscosity of liquid (Complete Set)(Complete Set with Glycerine) 60 Friction Apparatus(Complete Set with pulley and weights) 61 Flat plates of Brass / Glass(100x60x18mm) 62 Blocks of Wood with Hooks(12 cm X 8 cm X 8 cm) 63 Spring Balance(Range 5 to 1000 gm) 64 Set of 50 gms slotted weights(Slotted Weight - Iron Chrome Plated - 50gm × 10 = 500gm) 65 Flywheel Apparatus(Low Speed) 66 Meter Rod(Flat Meter Rod Scale) 67 Helical Spring(with Pointer and Hook) 68 Rigid Support (with Hanger) 69 Spherometer(5 mm to 200 mm) 70 Screw Gauge(0 - 25 mm, 0.01 mm)(Stainless Steel) 71 Vernier Callipers(0 - 12.5 cm metallic) (Brass) 72 Specific gravity bottle (with cap)(25ml) 73 Physical Balance + Weight Box(with weight box) 74 Convex Mirror(FL - 15cm, 20cm, 25cm) 75 Concave Mirror(FL - 15cm, 20cm, 25cm) 76 Wooden Bridge(for physicsl balance) 77 Wooden METRE Scale(1 m wodden scale) 78 Cantilever (Metal Bar)(1 m Metal rod with marking) 79 Metal Clamp(To fix cantilever to table) 80 Glass Slab(100x60x20 mm for refraction experiment) 81 Wodden Board(30x20 cm for refraction experiment) 82 Optical Bench(1.5 Meter with Both Rod Stainless Steel with Four heavy metal slider and with accessories.) 83 Convex Lens 50 mm diameter(25cm FL) 84 P O Box(Plug Type (Constantan & Manganin Coil)) 85 Resistance Box (1-500Ω) (1-500Ω range) 86 Resistance Box (1-1000Ω)(1-1000Ω range) 87 Resistance Box (1-10000Ω)(1-10000Ω range) 88 Rehostat(6 inches 100 ohms 1 ampere for resistance variance) 89 Resistance (2.5Ω, 5Ω, 10Ω, 15Ω)(5 of each value) 90 Battery Eliminator(2A, 12 V range) 91 P.N Junction Diode Characteristics Apparatus(Two Variable DC Regulated Power Supply (0 - 3V & 0 - 30V) with Two Analog Moving Coil Meters :( Dual range (3V/30V, 100µA/10mA). & 4mm Banana type sockets for connections. P-N Diode type: OA -79 2 Pcs) 92 Laying and Jointing PVC Pipe. Heading 93 8051 Trainer kit(8 BIT EMBEDDED MICROCONTROLLER TRAINER FEATURES • Single board design with various resources • Excellent training platform for embedded applications • Software development tools include assembler and ‘C’ compiler • Easy adaptability to different versions of microcontroller in the same family SPECIFICATIONS • Experimental board for 40 pin MCS51 and AVR family of microcontrollers • In-system programming (ISP) facility for many microcontrollers • Double RESET signal with manual key • Crystal frequency: 11.0592MHz • On-board RS232 compatible serial interface terminated in a 9 Pin D female connector • 4×4 matrix keyboard • 16×2 alphanumeric LCD connector (4-bit interface) and trimmer for contrast adjustment • Four 7-segment LED displays • I2C EEPROM (24Cxx) • Real time clock (DS1307) with lithium battery and SRAM • 8-high current output port (500mA) for driving external loads • Two 12V sugar cube relays • Continuous tone piezo buzzer • Temperature sensor socket with thermostat functions • Four 8-bit A/D converter, one 8-bit D/A converter provided by PCF8591 • All port-pins available on 10-pin box header • 8 LEDs for easy logic state monitoring • 8 input trigger switches using 8 push buttons • ISP programming with Flash ISP for AT89S51/52/8252/AVR • Infrared remote control receiver module IC supported • P89V51RD2BN • AT89S52 Installable software on CD • Programmers notepad : Free, open source, text editor • Flash ISP programmer software for 89SXX • Bascom basic compiler (demo version) • MIDE-51: An IDE for MCS-51 microcontroller • WinAVR : open source C compiler for AVR • Sample programs for peripherals DC 12V/500mA output power supply EXPERIMENTS • Study of LED blink • Study of dancing light • Study of LCD display • Study of LCD-keyboard display • Study of 7 –segment display • Study of RC5 remote control test program) 94 Suitable 8051 Trainer kit(With suitable Hardware and related software including AC variable voltage (0-10V) /current (0-5A) source, digital panel type ammeter & volmeter. Dedicated Intel 8051 based kit with ADC, 8255, 2K (extendable upto 8K) RAM & ROM, 8279,8253, necessary DC power supply and connecting cords.) 95 Suitable 8051 Trainer kit(Motor control interface card should have---- Motor Driver Unit, Interfacing Cards,Terminal connectors 20 - pin FRC Box Connectors, cables.8051 Micro Controller Kit DC Motor spec: Voltage 6.0V (Range: 1.5-12.), Speed: 2,700 rpm, Current: 0.02A, Torque: 5.88 mN. M;) 96 Suitable 8051 Trainer kit(Stepper Motor interface kit should have -- • 5V Stepper Motor • Angle control / Clockwise/ Counterclockwise • 1.8 degree Step Angle , • 34 mm Motor Length, • 1300 g.cm Holding Torque, • 6 no. Lead Wire • 0.3 A Rated Current, • 40 Ω Phase Resistance, • 20 mH Phase Inductance, • 0.18 Kg Motor Weight ; • Motor Driver Unit, Interfacing Cards, Terminal connectors 20 - pin FRC Box Connectors, cable, data sheet suitable for 8051 Micro Controller Kit) 97 Suitable 8051 Trainer kit(Microcontroler : Intel 80C51 Operating at 12 MHz Memory : -32 KB Onboard User Program Memory -12 KB Battrey Backed Up User program Memory -16 KB Battrey Backed Up User Data Memory Display : 40 Characters X 2 Lines LCD Display Keyboard : ASCII Keyboard Timer Counter Chip : 8253; 2 Counters available for User PPI : Two 8255 chips giving 48 TTL I/O Lines All Signals Terminated on 2 26 Pin FRC Connectors Serial Port : RS-232 Compatible serial port using 8250; signals treminated on a 9-pin D-type connector Expansion Bus : All address data & control bus brought out on 50 pinFRC connector for expansion Study Card Support : Dyna Series study cards support on this connector. All programs for study cards included in monitor program Modes Of Operation : -Introgation Mode : For interactive dialog with system -Assembler Mode : Line Assembler inbuilt in monitor helps you assemble programs directly -Single Step Mode : This mode is useful for Single Stepping inserting / removing breakpoints and debugging Software : – Powerfull Monitor Software with standard commands like move, fill, display/modify registers, execute Program, upload /download etc. – Single line assembler / dis-assembler.) 98 Suitable 8051 Trainer kit(With suitable Hardware and related software including AC variable voltage (0-10V) /current (0-5A) source, digital panel type ammeter & volmeter, frequency display,DW transformer of suitable rating for phase shifting (0-45 degree lead/lag). Dedicated Intel 8051 based kit with ADC, 2K (extendable upto 8K) RAM & ROM, 8279,8253, necessary DC power supply and connecting cords.) 99 8086 Trainer kit/ PC (Simulator) (8086 (INTEL),Operating Frequency : 6.144MHz crystal,32KB-SRAM for user Data,16KB-EEPROM (software monitor program),2x16 Char LCD display,Serial interfacing using 8251, 48 Programmable I/O Pins for ( 2 x 8255),Three 16-bit programmable timer (8253/8254),40-Pin FRC connector for Bus Extension,20-Pin FRC connector Add-on Interface from 8255,9-pin DB connector for UART (RS232) interface,Built-in assembler and dis-assembler,101-PC Type keyboard to enter user address/data commands.) 100 Zener Diode Characteristics/ Breakdown Voltage Kit(trainer kit) 101 JFET/MOSFET characteristics Kit(trainer kit) 102 UJT Relaxation Oscillator kit(trainer kit) 103 p.f. Meter, (Resolution - 0.001 p.f, 110/230 V AC) 104 inductance box, (10 micro Henry, 100 micro Henry, 1 mili Henry, 10 mili Henry, 100 mili Henry, 1 Henry) 105 capacitance box(1 nano Farad, 10 nano Farad, 100 nano Farad, 1 micro Farad, 10 micro farad.) 106 Rheostat(50 ohm, 10 Amp) 107 Rheostat(250 ohm, 2.5 Amp) 108 Rheostat(100 ohm , 5 Amp) 109 APFC panel(440 V, 180 A, 3ph Panel) 110 Kit to determine phase difference between voltage and current in series R-Land R-Ccircuits.(trainer kit) 111 Tachometer(5 digit LCD display to max 99999) 112 single Phase Transformer(1 KVA, 230/115V with all terminals boughtout for connections) 113 Isolation Transformer(220V / 220 V, 1 KVA) 114 Pulse Transformer(220 V , 100 W, 1ph Induction mpotor ) 115 3ph Transformer(3-phase, 1KVA, 415V/230V, transformer with provision for the external connection terminals to perform all vector groups (star-delta,delta-star etc.)) 116 3-ph Auto Transformer(415 V, 3ph, 20 hp.) 117 3ph Resistance Box(upto 415 V, 20 Amp) 118 1ph - Motor for Ceiling Fan(220 V , 100 W, 1ph Induction mpotor ) 119 Universal Motor (2000 RPM, 220 V) 120 Stepper MotoR Control Circuit with Stepper Motor(5 Amp, 220 V) 121 AC Servo Motor with control circuit(3000 RPM, 440V, 3PH) 122 DC Servo Motor with control circuit(3000 RPM, 440V, 3PH) 123 BuckChopper with Control panel(220 V, DC, 5 HP power rating) 124 BoostChopper with Control panel(220 V, DC, 5 HP power rating) 125 Ardino Uno R3 (Clock Speed 48 MHz, Flash Memory - 256 KB, SRAM - 32 KB, EEPROM - 8 KB) 126 Motor Driver L293D(4.5 V TO 36 V, 1 Amp) 127 pyranometer WITH SHADING RING FACILITY(Pyranometer with Shading ring facility:- Response time (95%) - < 1s, -Directional error (up to 80 ° with 1000 W/m2 beam) - < 10 W/m2, - Temperature dependence (-30 °c to +70 °c) - -0.15%/ °c, - Sensitivity – 60 to 100 µ v/W/m2, Impedance–50Ω, -Spectral range (50% points) – 400 to 1100 nm, -Typical signal output for atmospheric applications – 0 to 100 mV, -Maximum irradiance – 2000 W/m2, -Detector – Silicon photo-diode.One revolving platform for irradiance measurement at different tilt angle with Pyranometer fixing.Instruction manual and Commissioning of the instrument is included.) 128 radiation meter(Model no RN 2104) 129 solar cell characteristics apparatus(Complete set up of Poly crystalline silicon PV Cell with facility to measure the cell parameters – O.C. voltage (Voc), Short circuit current (Isc), Voltage-Current-Power at Maximum Power point (Vmp, Imp, Mpp), Fill factor, Efficiency and draw I-V characteristics of cell.Set up components – Poly crystalline Solar Module (12V, 5Wp), holding structure, Controller (12V, 5Wp), Halogen Lamp and holding structure with variable light intensity on cell and temperature measurement facility of cell, Battery, Necessary Voltmeter, Ammeter, Electrical Load, Wiring and cabling. Installation & commissioning of set up is included.) 130 Solar flat plate collector(One piece 100 LPD Flat plate collector with complete set up and measuring facility of temperature, flow, pressure, thermal efficiency. We have mentioned system specification; the specification of individual component should be given for evaluation purpose.) 131 Complete set up of 40 Watt, 12 V DC solar street lighting system for student demonstration. Necessary components with installation are required.(Supply of Polycrystalline solar PV Module - 75 Wp under STC;Rechargeable Battery - Minimum 12.8V, 30 AH capacity Lithium Ferro Phosphate battery with required MPPT Solar Charge Controller cum Inverter;Light Source - White light emitting diode (W-LED) 18 Watt, W-LED luminaire. Pole height 2.5 m adjustable above the ground level. The set up should be suitable for students’ demonstration.) 132 inverter, (12 V DC) 133 charge controller(12.5 V , 20 A) 134 ELCB, (Upto 30 mA) 135 MCCB, (415 V AC, 16 Amp) 136 RCCB(Upto 30 mA) 137 i) ACSR(.3m) 138 ii)Cu(.3m) 139 iii)Al(.3m) 140 iv)Galvanized Steel(.3m) 141 v)Cadmium Copper(.3m) 142 vi)AAC(.3m) 143 vii)AAAC(.3m) 144 viii)ACAR(.3m) 145 i)Belted Cables(.3m) 146 a)Screened Cables - H-Type Cables(11kv,0.3m) 147 b) Screened Cables - S.L Type Cables(66kv,0.3m) 148 c)Screened Cables - H.S.L Type cables(66kv,0.3m) 149 a)Pressure Cables - Oilfilled Cables(66kv,0.3m) 150 b)Pressure Cables - Gas filled Cables(66kv,0.3m) 151 iv)XLPE Cables(0.3m) 152 v)PVC Cables(0.3) 153 vi)FRLS Cables(0.3) 154 a)Pintype - 11KV(procelain)/(polymer)(11kv) 155 b)Pintype - 33KV(procelain)/(polymer)(33kv) 156 ii)Disc Type with metal links(procelain)(11kv) 157 a)Disc Type11KV(polymer)(11kv) 158 a)Disc Type 33KV(polymer)(11kv) 159 iii)Shackle type(procelain)(230v) 160 D.C Network Analyzer (2-wired) 161 Distributor simulator using Power Transmission Trainer(trainer kit) 162 Digital Megger 250V,500V,1000V( 250V,500V,1000V) 163 PVC conduit1/2 inch,10ft(0.5 inch 10ft) 164 Schering bridge(trainer kit) 165 Anderson Bridge(trainer kit) 166 Kelvins Double Bridge(trainer kit) 167 Wheatstone Bridge(trainer kit) 168 i) SWITCHES - Float switch 250v sensor for water level(250v,6A) 169 ii)SWITCHES - Proximity switch(250v,6A) 170 iii)SWITCHES - Limit switch(250v,6A) 171 iv)SWITCHES - Push button switch(230v,6A) 172 v)SWITCHES - Pressure switch(Danfoss KP35)(23v,6A) 173 vi)SWITCHES - Thermostat (30 Amp)(230v,30A) 174 vii)SWITCHES - Electromagnetic relay (15Amp,250V)(250V,15A) 175 viii)SWITCHES - selector switch(230v,6A) 176 Infra red camera for therma imaging 32*32*pixel infrared sensor(Hand held thermal imager: Object Temperature Range: -20° to 550°C (-4° to 1022°F)Temperature Accuracy:  ±2°C (3.6°F) or 2% of reading (Environment temperature 10-35°C; Object temperature >0 C)Field of View (FoV)/Minimum Focus Distance: 56°x 42°/ 0.5mSpatial Resolution (IFoV): 3.75mRadImage Frequency: 25Hz Focus FreeZoom: 1-32x continuous, digital zoom Focal Length: 3.2mm Focal Plane Array (FPA)/Spectral Range: Uncooled microbolometer/8-14μm IR Resolution: 256×192 pixels Display: 3.5 in. LCD, 640×480 pixels TouchscreenImage Modes: Infrared Image, Visual Image, Picture in Picture, Auto-fusion, ZoomColour Palette: IRON, Rainbow, Grey, Grey Inverted, Brown, Blue-Red, Hot-Cold, Feather, Above Alarm, Below Alarm, Zone Alarm, Vision ZoneAutomatic Hot/Cold DetectionCenter Spot, Three manual spotsStorage Media: 8 GB MicroSD card and 3.4GB internal EMMCData transfer between camera and PC. Live video on camera and PC.Video Storage Standard MPEG-4 encode. 640×480 at 30fps, on memory cardSimultaneous storage of IR and visual imagesImage Storage Format Standard JPEG or HIR files including measurement data, on memory card >6000 picturesImage Storage Mode IR/visual imagesImage Analysis ToolsInterfaces: USB Type C and WiFiRechargeable Li-Ion battery, 4 hours operating timeAuto Power-off) 177 Projector(sony ) 178 Printer with Xerox cum Scanner(Epson) 179 Projector- screen(150 inch)
Contract Date: Jan 24, 2025 Contract Value : ₹ 13.89 Lakh
Government Departments No of Bidders 16
West Bengal View Result →
17.
Science and Technology #10015887 AOC
Bids Are Invited For Radiation Survey Meter (Q3) Total Quantity : 1
Contract Date: Ref. Documents Contract Value : ₹ 6.32 Lakh
Government Departments No of Bidders 4
West Bengal View Result →
18.
Science and Technology #9986965 AOC
Bids Are Invited For Radiation Survey Meter (Q3) Total Quantity : 1
Contract Date: Ref. Documents Contract Value : ₹ 1.35 Lakh
Government Departments No of Bidders 3
Tamil Nadu View Result →
19.
Power #9984544 AOC
Bids Are Invited For Activity Monitor For Liquid Effluent Management System - N-16 And O-19 Radiation Monitor , Contamination Monitor Radiation Survey Meter Total Quantity : 3
Contract Date: Ref. Documents Contract Value : ₹ 24.35 Lakh
Boards / Undertakings / PSU No of Bidders 2
Tamil Nadu View Result →
20.
Housing Urban and Rular Development #9786076 Price Bid
Tender For Mow/Deposit Work Under Jail-3 Sub Dn, Pwd Bhopal-1 1.2 Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre. 1.2.1 Lime, moorum, building rubbish 1.2.2 Earth 1.2.3 Manure or sludge 1.2.4 Excavated rock 1.2.5 Sand, stone aggregate below 40mm nominal size 1.2.6 Stone aggregate 40mm nominal size and above 1.2.7 Stone soling 1.2.8 Bricks 1.2.9 S.W. Pipes 1.2.9.1 100 mm dia 1.2.9.2 150 mm dia 1.2.9.3 200 mm dia 1.2.9.4 250 mm dia 1.2.9.5 300 mm dia 1.2.9.6 350 mm dia 1.2.9.7 400 mm dia 1.2.9.8 450 mm dia 1.2.9.9 500 mm dia 1.2.9.10 600 mm dia 1.2.10 R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and reinforced cement pipes 1.2.10.1 100 mm dia 1.2.10.2 125 mm dia 1.2.10.3 150 mm dia 1.2.10.4 200 mm dia 1.2.10.5 250 mm dia 1.2.10.6 300 mm dia 1.2.10.7 350 mm dia 1.2.10.8 400 mm dia 1.2.10.9 450 and 500 mm dia 1.2.10.10 600, 700, 750 and 800 mm dia 2 1.3 Add extra for every additional lead of 50 metre or part thereof. 1.3.1 Lime, moorum, building rubbish 1.3.2 Earth 1.3.3 Manure or sludge 1.3.4 Excavated rock 1.3.5 Sand, stone aggregate below 40mm nominal size 1.3.6 Stone aggregate 40mm nominal size and above 1.3.7 Stone soling 1.3.8 Bricks 1.3.9 S.W. Pipes 1.3.9.1 100 mm dia 1.3.9.2 150 mm dia 1.3.9.3 200 mm dia 1.3.9.4 250 mm dia 1.3.9.5 300 mm dia 1.3.9.6 350 mm dia 1.3.9.7 400 mm dia 1.3.9.8 450 mm dia 1.3.9.9 500 mm dia 1.3.9.10 600 mm dia 1.3.10 R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and unreinforced cement pipes 1.3.10.1 100 mm dia 1.3.10.2 125 mm dia 1.3.10.3 150 mm dia 1.3.10.4 200 mm dia 1.3.10.5 250 mm dia 1.3.10.6 300 mm dia 1.3.10.7 350 mm dia 1.3.10.8 400 mm dia 1.3.10.9 450 and 500 mm dia 1.3.10.10 600, 700, 750 and 800 mm dia 3 2.1 Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. 2 2.2 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 5 2.3 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 6 2.4 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. 2.4.1 beyond 30 cm girth up to and including 60 cm girth 2.4.2 beyond 60 cm girth up to and including 120 cm girth 2.4.3 beyond 120 cm girth up to and including 240 cm girth 2.4.4 above 240 cm girth 7 2.5 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil 8 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil 9 2.7 Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. 2.7.1 Ordinary rock 2.7.2 Hard rock (requiring blasting) 2.7.3 Hard rock (blasting prohibited) 10 2.8 Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (No extra lift is payable if work is done by mechanical means)Note:-Excavation of hard rock shall be the property of the contractor subject to recovery. excavated material has to shift from site within 15 days after instruction issued by Engineer-InCharge otherwise after this penalty will imposed on contractor at the rate of Rs 50 per cum per day 2.8.1 Ordinary rock 2.8.2 Hard rock (requiring blasting) 2.8.3 Hard rock (blasting prohibited) 11 2.9 Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil 2.9.1 Pipes, cables etc., not exceeding 80 mm dia. 2.9.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 2.9.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. 12 2.10 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). 13 2.11 Extra for excavating trenches for pipes, cables, etc., in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) 14 2.12 Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, depth up to 1.5 m including including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : 2.12.1 Ordinary rock : 2.12.1.1 Pipes, cables etc. not exceeding 80 mm dia. 2.12.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. 2.12.1.3 Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia 2.12.2 Hard rock (requiring blasting) 2.12.2.1 Pipes, cables etc. not exceeding 80 mm dia. 2.12.2.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 2.12.2.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia 2.12.3 Hard rock (blasting prohibited) 2.12.3.1 Pipes, cables etc. not exceeding 80 mm dia. 2.12.3.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 2.12.3.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia. 15 2.13 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) 16 2.14 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) 17 2.15 Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). 2.15.1 Depth not exceeding 1.5 m. 2.15.2 Depth exceeding 1.5 m but not exceeding 3 m. 2.15.3 Depth exceeding 3 m but not exceeding 4.5 m. 18 2.16 Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). 2.16.1 Depth not exceeding 1.5 m. 2.16.2 Depth exceeding 1.5 m but not exceeding 3 m. 2.16.3 Depth exceeding 3 m but not exceeding 4.5 m. 19 2.17 Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) : 2.17.1 Depth not exceeding 1.5 m. 2.17.2 Depth exceeding 1.5 m but not exceeding 3 m. 2.17.3 Depth exceeding 3 m but not exceeding 4.5 m. 20 2.18 Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be leftpermanently in position. (Face area of timber permanently left to be measured). 21 2.23 Extra rates for quantities of works, executed: 2.23.1 In or under water and/or liquid mud, including pumping out water as required. 2.23.2 In or under foul position, including pumping out water as required. Note: - The extra percentage rate is applicable in respect of each item but limited to quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. 22 2.24 Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 23 2.25 Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means) 2.25.1 All kinds of soil. 2.25.2 Ordinary or hard rock. 24 2.26 Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of this layer shall be 20 cm. 25 2.27 Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. 2.27.1 With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) 2.27.2 Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. 26 2.28 Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then refiling the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc., disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5m. 2.28.1 All kinds of soil. 2.28.2 Ordinary rock 2.28.3 Hard rock (requiring blasting) 2.28.4 Hard rock (blasting prohibited) 27 2.29 Supplying chemical emulsion in sealed containers including delivery as specified. (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) 28 2.30 Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 2.30.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.4 Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.5 Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. 29 2.31 Deduct for disposed soil not levelled and neatly dressed. 30 2.32 Preconstruction antitermite treatment to the building under construction by providing.Stage 1: Treatment should not be carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to fill up soil within the plinth area before laying the subgrade for flooring. 31 2.33 Making bore holes for providing dowel bars at designed depth in rock foundation by drilling 40 mm dia bore hole in rock including necessary bending hooking, in position and grouting with cement slurry etc. complete as per drawing and specification. (Steel to be paid separately). 32 2.34 Excavation in soil using hydraulic excavator and including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- section, and transporting to the appropriate ground contour, location and levelling and dressing earth neatly with all lifts and lead upto 1000 metre. 33 2.35 Earth work in rough excavation by any means and bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne in embankments for roads, flood banks, marginal bank and guide bank of filling up ground depression within campus, lead upto 50m and all lift. All kinds of soil. 34 2.36 Bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammers etc. and rolling every 3rd and top-must layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal bank and guide bank etc. lead upto 50m and lift upto 1.5m. All kinds of soil. 35 2.37 Deduct for not rolling with power roller of minimum 8 tonnes for bankingfilling excavated earth in layers not exceeding 20cm in depth. 36 2.38 Deduct for not watering with the excavated earth for bankingfilling 37 2.39 Providing and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm I.D.with inbuilt pressure compensation chip at every 30 cm interval in the tube,. The contractor shall submit approved line plan for piping system and junction boxes dully approved by Engineer-in- charge with bond of 5 year warranty. 2.39.1 Permanent piping system with Junction boxes 2.39.2 Anti-termite chemical injected area 38 2.40 Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (All kinds of soil) 39 3.1 Cement mortar 1:1 (1 cement: 1 sand) 40 3.2 Cement mortar 1:2 (1 cement: 2 sand). 41 3.3 Cement mortar 1:3 (1 cement: 3 sand). 42 3.4 Cement mortar 1:4 (1 cement: 4 sand). 43 3.5 Cement mortar 1:5 (1 cement: 5 sand). 44 3.6 Cement mortar 1:6 (1 cement: 6 sand). 45 3.7 Cement mortar 1:2 (1 cement: 2 stone dust). 46 3.8 Cement mortar 1:2 (1 cement: 2 marble dust). 47 3.9 White cement mortar 1:2 (1 white cement: 2 marble dust). 48 3.10 Cement mortar 1:5 (1 cement: 5 marble dust). 49 3.11 White cement mortar 1:3 (1 white cement: 3 marble dust). 50 3.12 White cement mortar 1:5 (1 white cement: 5 marble dust). 51 3.13 Mortar in lime , surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5 52 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : 4.1.1 With 20mm nominal size graded stone aggregate. 4.1.1.1 M-25 – Grade concrete 4.1.1.2 M-20 – Grade concrete 4.1.1.3 M-15 – Grade concrete 4.1.1.4 M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) 4.1.2 With 40mm nominal size graded stone aggregate. 4.1.2.1 M-15 - Grade concrete 4.1.2.2 M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) 4.1.2.3 M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate 4.1.3 With fly ash. 4.1.3.1 1:2:3½:9 (1 ordinary Portland cement : 2 Fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size) 4.1.3.2 1:2½:4:11 (1 ordinary Portland cement : 2½ fly ash : 4 sand : 11 graded stone aggregate 40 mm nominal size) Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. 53 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : 4.2.1 With 20mm nominal size graded stone aggregate 4.2.1.1 M-25 – Grade concrete 4.2.1.2 M 20 – Grade concrete 4.2.1.3 M 15 – Grade concrete 4.2.1.4 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 4.2.2 With 40mm nominal size graded stone aggregate 4.2.2.1 M-15 - Grade concrete 4.2.2.2 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 54 4.3 Centering and shuttering including strutting, propping etc. and removal of form work for : 4.3.1 Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. 4.3.2 above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. 4.3.3 Above plinth: Columns, pillars, posts and struts. 55 4.4 Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing . 4.4.1 M-15 (With 20mm nominal size graded stone aggregate) 4.4.2 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 56 4.5 Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement morta1:3 (1 cement : 3 sand) on exposed surfaces complete.(With 20mm nominal size graded stone aggregate) 57 4.6 Providing and fixing upto floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 sand) on exposed surfaces complete. 4.6.1 M-25 (With 20mm nominal size graded stone aggregate) 4.6.2 M-20 (With 20mm nominal size graded stone aggregate) 4.6.3 M-15 (With 20mm nominal size graded stone aggregate) 4.6.4 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. 58 4.7 Providing and fixing upto floor two level precast cement concrete solid block including hoisting and setting in position with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete : 4.7.1 M-15 (With 20mm nominal size graded stone aggregate) 4.7.2 M-10 (M 10) (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 59 4.8 Providing and Fixing upto floor two level pre cast concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete. 4.8.1 M-15 (With 20mm nominal size graded stone aggregate) 4.8.2 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. 60 4.9 Add extra for item no. 4.6, 4.7 and 4.8 above floor two level for every additional floor or part there of 61 4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). 62 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size). 63 4.12 Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer. 64 4.13 Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 65 4.14 Extra for concrete work in superstructure above floor two level for each floors or part thereof 66 4.15 Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.Note for item No. 4.15:- The quantity will be calculated by multiplying. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored. 67 4.16 Extra for laying concrete in or under foul positions. 68 4.17 Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.) 69 4.18 Extra for addition of synthetic polyester triangular fiber of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/ Water retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer-in- Charge. 70 4.19 Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. 71 4.20 Providing and fixing up to floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) 72 4.21 Providing and fixing up to floor two level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) 73 4.22 Providing and fixing up to floor two level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) 74 4.23 Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.Note : (1) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacemen to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC. 4.23.1 All works up to plinth level: 4.23.1.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.23.1.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.23.1.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 4.23.2 All works above plinth and upto floor two level 4.23.2.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.23.2.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.23.2.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 75 4.24 Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in- charge. 4.24.1 All works up to plinth level: 4.24.1.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.24.1.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.24.1.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 4.24.2 All works above plinth and upto floor two level 4.24.2.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.24.2.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.24.2.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 76 4.25 Plum Cement concrete 1:2:4 with 75% graded metal of maximum size 40 mm and 25% plum of 150mm size. 77 4.26 Providing and laying cement concrete in Sunken floors of WC, Toilet, Wash Area, etc with 1:5:10 (1 cement : 5 coarse sand (zone-3) : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering 78 5.1 Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.1 M-20 Grade Concrete 5.1.2 M-15 Grade Concrete 79 5.2 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: 5.2.1 M-20 Grade Concrete 80 5.3 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade. 5.3.1 M-20 Grade Concrete 81 5.4 Providing and laying upto floor two level reinforced cement concrete (with20 mm nominal size graded stone aggregate) in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with Concrete grade. 5.4.1 M-20 Grade Concrete 82 5.5 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in arches, archribs, domes, vaults, shells, folded plate above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in Concrete grade. 5.5.1 M-20 Grade Concrete 83 5.6 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in chimneys, shafts, upto floor two level excluding the cost of centring, shuttering, finishing and reinforcement with 5.6.1 M-20 Grade Concrete 88 5.7 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in well-steining excluding the cost of centering, shuttering, finishing and reinforcement with 5.7.1 M-20 Grade Concrete 84 5.8 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement in M 20 –Grade Concrete 85 5.9 Centering and shuttering in cluding strutting, propping etc. and removal of form for: 5.9.1 Foundations, footings, bases of columns, etc. for concrete upto plinth level 5.9.2 Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. 5.9.2.1 Uptoplinthlevel. 5.9.2.2 Above plinth upto 3.6 m height from plinth level 5.9.2.3 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. 5.9.3 Suspended floors, roofs, landings, balconies and access platform. 5.9.4 Shelves(Cast in situ) 5.9.5 Lintels, beams, girders, bressumers and cantilevers 5.9.6 Columns, P i l l a r s , Piers, Abutments, Posts and Struts. 5.9.7 Stairs, (excluding landings) except spiral- Staircases. 5.9.8 Spiral staircases (including landing). 5.9.9 Arches, domes,vaults upto 6m span 5.9.10 Extra for arches, domes, vaults exceeding 6 m span 5.9.11 Chimneys and shafts 5.9.12 Coffer/waffle slab of any size or shape as shown in the drawing. 5.9.13 Well steining 5.9.14 Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards. 5.9.15 Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). 5.9.16 Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. 5.9.17 Cornices and mouldings 5.9.18 Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. 5.9.19 Weather shade, Chajjas, corbels etc., including Edges. 5.9.20 Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works) 5.9.21 Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of S.E. in case of B&R works and from Additional Project Director in case of PIU works) 86 5.10 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof (Plan area to be measured) 5.10.1 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). 87 5.11 Providing, hoisting and fixing up to floor two level precast reinforced cement concrete in lintels, manhole cover, shelves and like including setting in cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with M 15 –Grade Concrete. 88 5.12 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 sand) etc. complete excluding plastering of the jambs, sills and soffits. 5.12.1 50 mm thick 5.12.2 40 mm thick 5.12.3 25 mm thick 89 5.13 Encasing rolled steel sections, in beams and columns, with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. 80 5.14 Encasing rolled steel section in grillages with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including centering and shuttering but excluding cost of expanded metal and hangers. 91 5.15 Extra for providing and fixing expanded metal mesh of size 20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages excluding cost of hangers. 92 5.16 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete .(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”) 5.16.1 Mild steel and Medium Tensile steel bars. 5.16.2 Hard drawn steel wire 5.16.3 Cold twisted bars (CTD) 5.16.4 Hot rolled deformed bars 5.16.5 Hard drawn steel wire fabric 5.16.6 Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 93 5.17 Add extra for providing reinforcement above Floor two level for every additional floor or part thereof. 94 5.18 Providing and fixing in position copper plate as per design for expansion joints. 95 5.19 Providing and filling in position, blown bitumen in expansion joints. 96 5.20 Providing and filling in position bitumen mix filler of Proportion 80 kg. Of hot bitumen, 1 kg. Of cement and 0.25 cubic metre of sand for expansion joints. 97 5.21 Providing and filling gap in expansion joint between RCC/ Stone/Ceramic tiles/Granite/ Marble by providing silicon sealant over backer rod of approved quality weather sealant as per drawing and direction of engineer in charge up to 25mm width & 12 mm depth. 98 5.22 Providing and fixing in position bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints. 5. 22.1 12 mm thick 5. 22.2 25 mm thick 5. 22.3 50 mm thick 99 5.23 Providing and fixing sheet covering over expansion joints with iron screws as per design. 5. 23.1 Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 5. 23.1.1 150mm wide. 5. 23.1.2 200mm wide. 5. 23.1.3 250mm wide. 5. 23.2 Aluminium fluted strips 3.15mm thick. 5. 23.2.1 150 mm wide. 5. 23.2.2 200 mm wide. 5. 23.2.3 250 mm wide. 5. 23.3 Stainless steel Grade 304 plate-1.0 mm thick 5. 23.3.1 150 mm wide. 5. 23.3.2 200 mm wide. 5. 23.3.3 250 mm wide. 100 5.24 Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. 101 5.25 Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete.Note- For Item No. 5.25:-The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub – soil water condition 102 5.26 Extra for laying reinforced cement concrete in or under foul positions. 103 5.27 Providing and laying in position machine batched, machine mixed cement concrete (BMC) of M-25 grade for reinforced cement concrete work using cement content as per approved mix design concrete without impairing strength and durability as per direction of Engineer-in charge and pumping of concrete to site of laying and finishing but excluding the cost of centering, shuttering, and reinforcement. (Note: - Minimum cement content is 330 kg/cum) and no extra payment for extra cement used as per mix design. 5.27.1 All works upto plinth level. 5.27.2 All works above plinth level and upto floor five level. 5.27.3 Add extra for each floor for all works above floor five level. 104 5.28 Extra for providing richer mixes of BMC design mix as per item no 5.27 upto plinth level and at all floor levels. (No extra payment for using extra cement as per requirement of mix design.) 5. 28.1 Providing M-25 grade concrete instead of M- 20 grade.(Note : minimum cement content is @ 330 kg/cum) 5. 28.2 Providing M-30 grade concrete instead of M- 25 grade.(Note : minimum cement content is @ 340 kg/cum) 5. 28.3 Providing M-35 grade concrete instead of M- 25 grade.(Note: : minimum cement content is @ 350 kg/cum) 5. 28.4 Providing M-40 grade concrete instead of M- 25 grade.(Note: minimum cement content is @ 360 kg/cum) 105 5.29 Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in M-20 –Grade Concrete (with graded stone aggregate 10mm nominal size. including provision of steel hooks for lifting and form work, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement. 106 5.30 Providing and laying in position ready mixed concrete (RMC) of M-25 grade for reinforced cement concrete work, using cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.Note: Minimum cement content is @ 330 kg/cum. (No extra payment for using extra cement as per requirement of mix design.) 5.30.1 All works upto plinth level. 5.30.2 All works above plinth level and upto floor V level. 5.30.3 Extra for each additional floor for all works above floor five level 107 5.31 Extra for R.C.C. work above floor two level for each floors or part thereof. (except items 5.27 and 5.30) 108 5.32 Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer’s specification and direction of Engineer-in-charge. 5.32.1 Non pigmented wet curing compound 5.32.2 Pigmented wet curing compound. 109 5.33 Providing and fixing in position factory made precast RCC M-40 doors, windows and ventilator frames having excellent smooth finish, as per IS: 6523 with 6mm dia main reinforcement each polymer block having at least four holes for passing one or adjacent rebates to hold fast grill or steel bar, ventilator frame provided with grooves for louvers at an angel of 45 degree at spacing to block direct vision etc. complete, as per the direction of Engineer-in-charge. The cost of hold fast and cement concrete block of 1:3: 6 (1 Cement: 3 sand: 6 Graded stone aggregate 20mm nominal size) mix is also included in the item. 5. 33.1. Frame 125 mmx 60 mm (double rebate) 5. 33.2. Frame 100mmx 60 mm (Single rebate) 5. 33.3 Frame 85mmx 60 mm (Single rebate) 110 5.34 Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 sand). 111 5.35 Providing and fixing in position pre moulded compressible filler board made from polymer base in black color approved make conforming to the specifications having minimum density of 95 kg / cum, non- staining, with less than 1 percent water absorption and compression recovery of 93 percent minimum including cost of double sided adhesive tape, sealant etc. in expansion joints. 5. 35.1 12 mm thick 5. 35.2 25 mm thick. 5. 35.3 50 mm thick. 112 5.36 Providing and sealing the retaining wall expansion Joints with anodized aluminum extruded section of 135 mm × 3.1 mm confirm to alloy of 6063 T5/T6including fixing of an imported EPDM moisture Barrier conform to (American Society for Testing and Materials) 2240 & ASTM - G53 & 84 fixing with Epoxy adhesive confirm to ASTM C-881 complete in all respect as per manufacturer Drawing and specifications. With 5 year guarantee. 113 5.37 Providing and fixing sheet covering over expansion joints with iron screws as per design. Non- asbestos cement bonded particle board 6 mm thick as IS: 14276 5.37.1 150mm wide 5.37.2 200mm wide 5.37.3 250mm wide 114 5.38 Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanical pulling arrangement like Rabbit/ Bed master including all accessories for Stressing &destressing operations as per approved make conforming to IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in- charge. 115 5.39 Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In- Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer - inCharge. (Material shall confirm to ASTM 6063). 5. 39.1 Floor Joint of 100 mm gap 5. 39.2 Floor Joint of 150 mm gap 5. 39.3 Floor Joint of 200 mm gap 116 5.40 Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). 5. 40.1 Wall Joint of 100 mm gap 5. 40.2 Wall Joint of 150 mm gap 5. 40.3 Wall Joint of 200 mm gap 117 5.41 Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centeringarragement support plates asper ASTM B221-02. . The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) 5.41.1 Roof Joint for 100 mm gap 5.41.2 Roof Joint for 150 mm gap 5.41.3 Roof Joint for 200 mm gap 118 5.42 Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) 119 6.1 Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not less than 40kg /cm2 and water absorption not more than 15% in foundation and plinth i/c curing etc. complete. 6.1.1 Cement mortar 1:4 (1 cement : 4 sand) 6.1.2 Cement mortar 1:6 (1 cement : 6 sand) 120 6.2 Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than 40kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete. 6.2.1 Cement mortar 1:4 (1 cement : 4 sand) 6.2.2 Cement mortar 1:6 (1 cement : 6 sand) 121 6.3 Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. 6.3.1 Cement mortar 1:4 (1 cement : 4 sand) 6.3.2 Cement Mortar 1:6 (1 cement:6 sand). 122 6.4 Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. 6.4.1 Cement mortar 1:4 (1 cement : 4 sand) 6.4.2 Cement Mortar 1:6 (1 cement:6 sand). 123 6.5 Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. 6.5.1 Cement mortar 1:4 (1 cement : 4 sand) 6.5.2 Cement Mortar 1:6 (1 cement: 6 sand). 124 6.6 Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. 6.6.1 Cement mortar 1:4 (1 cement : 4 sand) 6.6.2 Cement Mortar 1:6 (1 cement : 6 sand) 125 6.7 Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : 6.7.1 Having 100 kg / cm2 average compressive strength. 6.7.1.1 Cement mortar 1:4 (1 cement : 4 sand) 6.7.1.2 Cement mortar 1:6 (1 cement : 6 sand) 6.7.2 Having 75 kg / cm2 average compressive strength. 6.7.2.1 Cement mortar 1:4 (1 cement : 4 sand) 6.7.2.2 Cement mortar 1:6 (1 cement : 6 sand) 6.7.3 Having 50 kg / cm2 average compressive strength. 6.7.3.1 Cement mortar 1:4 (1 cement : 4 sand) 6.7.3.2 Cement mortar 1:6 (1 cement : 6 sand) 126 6.8 Brick work with calcium silicate bricks machine moulded conforming to IS:4139, having 100 kg/cm2 average compressive strength in super structure above plinth level upto floor II level in : 6.8.1 Cement mortar 1:4 (1 cement : 4 sand) 6.8.2 Cement mortar 1:6 (1 cement : 6 sand) 127 6.9 Brick work with extruded burnt fly ash clay sewer bricks (Conforming to IS: 4885 ) in foundation and plinth : Cement Mortar 1:4 ( 1 cement : 4 sand) 128 6.10 Brick work with extruded burnt fly ash clay sewer bricks (conforming to IS: 4885) in archesin foundation and plinth including centering and shuttering complete in cement mortar 1:3 (1 cement: 3 sand). 129 6.11 Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item. 130 6.12 Providing half brick masonry with well burnt chimney bricks in bull patent trench kiln manufactured by ghol process crushing strength not less than 40 kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level. 6.12.1 Cement mortar 1:3 (1 cement : 3 sand) 6.12.2 Cement mortar 1:4 (1 cement : 4 sand) 131 6.13 Providing half brick masonry with well burnt chimney bricks in bull pattern trench kiln crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level. 6.13.1 Cement mortar 1:3 (1 cement : 3 sand) 6.13.2 Cement mortar 1:4 (1 cement : 4 sand) 132 6.14 Providing half brick masonry with well burnt open bhatta bricks crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level 6.14.1 Cement mortar 1:3 (1 cement : 3 sand) 6.14.2 Cement mortar 1:4 (1 cement : 4 sand) 133 6.15 Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super structure above plinth and upto floor two level. 6.15.1 Having 100 kg/cm2 average compressive strength. 6.15.1.1 Cement mortar 1 : 3 (1 cement : 3 sand) 6.15.1.2 Cement mortar 1 : 4 (1 cement : 4 sand) 6.15.2 Having 75 kg/cm2 average compressive strength. 6.15.2.1 Cement mortar 1 : 3 (1 cement : 3 sand) 6.15.2.2 Cement mortar 1 : 4 (1 cement : 4 sand) 6.15.3 Having 50 kg/cm2 average compressive strength. 6.15.3.1 Cement mortar 1 : 3 (1 cement : 3 sand) 6.15.3.2 Cement mortar 1 : 4 (1 cement : 4 sand) 134 6.16 Extra for half brick masonry in superstructure, above floor two level for every floor or part thereof respective item. 135 6.17 Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of in half brick masonry. 136 6.18 Honey-comb brick work 10 cm thick with well burnt chimney bricks manufactured by ghol process crushing strength not less than 40kg /sqcm and water absorption not more than 15% in cement mortar 1:4 (1 cement : 4 sand). 137 6.19 Extra for forming cavity 5cm to 7.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. Ties 300mm long of 25x3mm section at not less than 3 ties per sqm as per approved design 138 6.20 Brick work in plain arches in superstructure including centering and shuttering complete with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 cement : 3 sand). 139 6.21 Brick work in gauged arches in superstructure in cement mortar 1:3 (1 cement : 3 sand) including centering and shuttering complete, with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% 140 6.22 Providing half brick masonry with kiln burnt clay bricks of 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 Cement : 3 sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm wide bitumen felt type 3 grade 1. 141 6.23 Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. 142 6.24 Extra for laying brick work in or under foul position. 143 6.25 Providing and laying cellular concrete blocks masonry having density ranging from 800kg/m3 in super structure above plinth level up to floor two level in cement mortar 1:4 (1 cement: 4 sand) The nominal dimensions of the concrete blocks shall be as follows in additional block shall be of half lengths of 200, 250 or 300 mm to correspond to the full lengths. The size of the blocks specified other than those specified may also be used. 144 6.26 Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry, using AAC blocks (Size length 300, 400, 500, 600 mm Height 200, 250, 300 mm Width 100, 150, 200, 250 mm) conforming to IS 2185 PART 3, having compressive strength not less than 4 MPa (Grade II) in super structure, blocks jointed with approved block laying polymer modified adhesive mortar as per ASTM international standard including raking out joints. Vertical bands shall be placed along jams (vertical member of chowkhats) and extend upto lintel levels to arrest cracking at corner openings. RCC bands shall be measured with AAC block masonry. Rates include all materials including steel bars, wastages, scaffolding and all labour etc. complete. 6.26.1 AAC Masonry in polymer modified mortar 145 6.27 Extra for AAC masonry work in superstructure above floor two level for each additional floor or part thereof 146 6.28 Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced roof slabs, lintels and chhajjas as per IS: 6073 -2006 grade D specifications (dry density, without steel, 550 kg/m3 to 650 kg/m3 and minimum compressive strength 3.5 N/mm2) reinforcement steel provided inside AAC slab, lintel and chhajja shall be ascertained on the basis of manufacturer’s certificate and also by random destructive testing done by engineer-in-charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Deflection & ultimate load test for AAC reinforced roof slab and lintel shall be as per annex. B of IS: 6073 -2006 and criteria for conformity and sampling shall be as per clause-13 of IS: 6073 -2006. 147 6.29 Precast autoclaved aerated concrete (AAC) reinforced wall panels:- Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced wall panels as per IS:6072 -1972 grade D (dry density, without steel, 550 kg/m3 to 650 kg/m3 and inside AAC panels. Quantity of reinforcement steel in AAC panels shall be ascertained on the basis of certificate of the manufacturer and also by random destructive testing by engineer-in- charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Cost of reinforcement inside AAC panels shall be paid separately. 148 6.30 Add extra for AAC wall panels, roof slabs, lintels and chhajjas above floor two level for each additional floor as per item no 6.29 and 6.30. 149 6.32 Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) 6.32.1 From ground level upto plinth level 6.32.2 Above plinth level upto floor II level 150 6.33 Brick work with modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) 6.33.1 From ground level upto plinth level 6.33.2 Above plinth level upto floor II level 151 6.34 Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor two level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 152 6.35 Extra for Gypsum panel Partitions in superstructure above floor two level for every four floors or part thereof. 153 7.1 Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : 7.1.1 Cement mortar 1:6 (1 cement : 6 sand) 154 7.2 Random rubble masonry with hard stone in superstructure above plinth level and upto floor two level, including leveling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. 7.2.1 Cement mortar 1:6 (1cement: 6 sand). 155 7.3 Extra for random rubble masonry with hard stone in superstructure above floor two level for every floors or part thereof 156 7.4 Extra for random rubble masonry with hard stone in : 7.4.1 Square or rectangular pillars 7.4.2 Circular pillars. 157 7.5 Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m. 158 7.6 Coursed rubble masonry (1st or 2nd sort) with hard stone in foundation and plinth. 7.6.1 Cement mortar 1:6 (1 cement : 6 sand) 7.6.2 Cement mortar 1:6 (1 cement : 6 sand) 159 7.7 Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor two level. 7.7.1 Masonry work (first sort) in cement mortar 1:6 (1 cement : 6 sand) 7.7.2 Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 sand) 160 7.8 Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above floor two level for every floors or part thereof 161 7.9 Extra for coursed rubble masonry with hard stone (first or second sort) in : 7.9.1 Square or rectangular pillars 7.9.2 Circular pillars. 7.9.3 Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m. 162 7.10 Stone work in plain ashlar masonry in super structure upto floor two level in cement mortar 1:6 (1 cement : 6 sand) including pointing with cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the sand stone shade : 7.10.1 One face dressed. 7.10.1.1 Red sand stone 7.10.1.2 White sand stone 7.10.2 Both face dressed. 7.10.2.1 Red sand stone. 7.11.2.2 White sand stone 163 7.11 Stone work plain ashlar masonry in arches in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. 7.11.1 One face dressed. 7.11.1.1 Red sand stone 7.11.1.2 White sand stone 7.11.2 Both face dressed. 7.11.2.1 Red sand stone. 7.11.2.2 White sand stone 164 7.12 Stone work plain ashlar masonry in domes, in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. 7.12.1 One face dressed 7.12.1.1 Red sand stone 7.12.1.2 White sand stone 7.12.2 Both face dressed. 7.12.2.1 Red sand stone. 7.12.2.2 White sand stone. 165 7.13 Stone work ashlar masonry punched (ordinary) in superstructure above plinth level and upto floor two level in cement mortar 1:6 (1 white cement: 6 sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. 7.13.1 Red sand stone one face punched. 7.13.2 Red sand stone both face punched 7.13.3 White sand stone one face punched. 7.13.4 White sand stone double face punched 166 7.14 Extra for stone work, plain ashlar or ashlar punched above floor two level for every floor or part thereof. 167 7.15 Extra for plain ashlar or ashlar punched in : 7.15.1 Square or rectangular pillars 168 7.16 Extra for stone work; plain ashlar or ashlar punched in curved on plan with a mean radius not exceeding 6 m. 169 7.17 Extra for additional cost of centering for arches exceeding 6m span including all strutting, bolting, wedging etc. And removal (area of soffit to be measured). 170 7.18 Stone work sunk or moulded or sunk and moulded upto floor Two level in cement mortar 1:6 (1cement : 6 sand) including pointing with white cement mortar 1:2 (1 white : 2 marble dust) with an admixture of pigment matching the stone shade : 7.18.1 Red sand stone 7.18.2 White sand stone 171 7.19 Extra for stone work sunk or moulded or sunk and moulded or carved in : 7.19.1 Triangular or Square or rectangular pillars 7.19.2 Circular or polygonal pillars 172 7.20 Extra for stone work sunk or moulded in cornices. 173 7.21 Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid for separately): 7.21.1 Red sand stone - exposed face fine dressed with rough backing. 7.21.1.1 70 mm thick. 7.21.1.2 60 mm thick. 7.21.1.3 50 mm thick 7.21.1.4 40 mm thick. 7.21.1.5 30 mm thick. 7.21.2 Red sand stone - Exposed face machine cut and table rubbed with rough backing. 7.21.2.1 70 mm thick. 7.21.2.2 60 mm thick. 7.21.2.3 50 mm thick 7.21.2.4 40 mm thick. 7.21.2.5 30 mm thick. 7.21.3 White sand stone - exposed face fine dressed with rough backing. 7.21.3.1 70 mm thick. 7.21.3.2 60 mm thick. 7.21.3.3 50 mm thick 7.21.3.4 40 mm thick. 7.21.3.5 30 mm thick. 7.21.4 White sand stone - Exposed face machine cut and table rubbed with rough backing. 7.21.4.1 70 mm thick. 7.21.4.2 60 mm thick. 7.21.4.3 50 mm thick 7.21.4.4 40 mm thick. 7.21.4.5 30 mm thick. 174 7.22 Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. 175 7.23 Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement :2 sand) including making the necessary chases in stone and holes in walls wherever required. 176 7.24 Providing and fixing stone dowels of size 10x5x2.5cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases 177 7.25 Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases. 178 7.26 Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 sand) including pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the stone shade: 7.26.1 Red sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. 7.26.2 White sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. 179 7.27 Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade: 7.27.1 Red sand stone 7.27.2 White sand stone 180 7.28 30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement: 4 sand) including finishing complete. 181 7.29 Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. 182 7.30 Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. 7.30.1 Red sand stone 7.30.2 White sand stone 183 7.31 Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1cement :3 sand) including pointing in white cement mortar 1:2 (1white cement: 2stone dust) with an admixture of pigment , matching the stone shade, jali slab without any chamfers etc. 7.31.1 Red sand stone 7.31.2 White sand stone 184 7.32 Extra for laying stone work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of stone work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. 185 7.33 Extra for laying stone work in or under foul position. 186 7.34 Wall lining butch work upto 10m height with red/ white sand stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 sand) i/c ruled pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in- charge. 187 7.35 Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 sand) and jointed with Cement mortar 1:2 (1 cement : 2 marble dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps which shall be paid for separately) 7.35.1 25mm thick Kota stone slabs exposed face dressed and rubbed. 7.35.2 25mm thick Dholpur stone slabs exposed face dressed and rubbed. 7.35.3 20 to 25mm thick kota stone slabs exposed slab not dressed and rubbed. 7.35.4 20 to 25mm thick Dholpur stone/shivpuri stone not dressed and rubbed. 188 7.36 Stone tile work with 8mm thick mirror polished and machine cut edge for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand), including pointing in white cement with an admixture of pigment to match the stone shade. 7.36.1 Granite stone of any colour and shade 7.36.2 Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble 189 7.37 Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. 190 7.38 Providing and fixing dry stone cladding upto 10 metre height with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and/ or with the help of cramps, pins etc. And sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins. shall be paid for separately.) 7.38.1 Red sand stone. 7.38.2 White sand stone 191 7.39 Providing and fixing structural steel frame (for dry stone cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/rectangular tube in the required pattern as per architectural drawing including including drilling necessary steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution).The frame work shall be fixed in true horizontal and vertical lines/ planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel clamps shall be paid for separately and nothing extra shall be paid.) 192 7.40 Providing and fixing adjustable stainless steel clamps of approved quality and of required shape and size adjustable with stainless steel nuts bolts and washer (total weight not less than 260 gms) for dry stone cladding fixed on frame 193 8.1 Providing and supplying aluminium extruded tubular and other aluminium sections frame work as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coated of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). 194 8.2 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of aluminium structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels.. (A) Structural analysis anddesign and preparation of shopdrawings for the specified designloads conforming to IS 875 partIII (the system must passed theproof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sectionsBfor fixing glazing panels of various thicknesses, aluminum cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage andprotection against fire hazard including (B) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentional movement for achieving perfect verticality and fixing structuralglazing system rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contactswith nuts and washers etc. of stainless steel grade 316, of the required capacity and in requirednumbers.(C) Providing and filling, two part pump filled, structural silicone sealant and one partweather silicone sealant compatible with the structural silicone sealant of required bitesize in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(D) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick andof sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight(E) Making provision for drainage of moisture/ water that enters the curtain glazing systemto make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary 195 8.3 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.8.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. 196 8.4 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. 197 8.5 Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non- combustible fibre glass wool insulation 50 mm thick having density 48 kg/m3, conforming to IS: 8183 and BS: 3958 Part 5.The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non- woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm/sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete. 198 8.6 Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., included in cost of relevent Item). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. 199 8.7 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel (ACP) Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. upto two decimal places. 8.7.1 4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick) 8.7.2 4 mm thick alumminium composite pannel material consisting of 3.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 8.7.3 3 mm thick alumminium composite pannel material consisting of 2.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 200 8.8 Design, supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as pr IS 875 (Part- III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider and other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete.For the purpose of payment actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured., 201 8.9 Providing and fixing aluminium magnesium alloy (FACADE) wall cladding system consisting of panels 200mm wide x 17mm deep x 0.5mm thick of maximum length of 6.0 mtr. coil coated on a continuous paint line double baked and roll formed from centre to centre at a distance of maximum 1.20 mtr. The stringer shall be fixed to a suitable rigid structure. All panels shall be achromatised for maximum bond between metal and paint, enamelled twice under high temperature one side with full primer and the other side (inner side) with a primer coat on a continuous paint line, and fixed as per the direction of the Engineer-in-Charge. 202 8.10 Providing and fixing Aluminium Magnesium alloy Plain Panel Sun Louvres of approved colour consisting of panel 84 mm wide x 16mm deep x 0.6mm thick with round edges panel length upto 6 mtrs coil coated on a continuos paint line double baked between metal and paint, enamelled twice under high temperature one side with full primer and finish, the other side (inner side) with a primer coat and Skin Coat on a Continuos Paint Line.Note: - 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. upto two decimal places. 203 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). 9.1.1 Second class teak wood 9.1.2 Sal wood 9.1.3 Kiln Head wood seasoned and chemically treated hard wood (Haldu, Kail, Bija wood.) 9.1.4 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. 9.1.4.1 Frame of size 100mmX60mm single or double rebate 9.1.4.2 Frame of size 120mmX60mm double rebate. 205 9.2 Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001(Part-B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately). 206 9.3 Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position ( with necessary stainless steel screw) 9.3.1 Sal wood 9.3.2 Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 9.3.3 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. 207 9.4 Extra for additional labour wood work in circular shape, such as in frames of fan light : 9.4.1 Second class teak wood 9.4.2 Sal wood 9.4.3 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.4.4 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. 208 9.5 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all complete as per direction of Engineer-in-charge. 9.5.1 Second class teak wood 9.5.1.1 35 mm thick shutters 9.5.1.2 30 mm thick shutters 9.5.2 Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 9.5.2.1 35 mm thick shutters 9.5.2.2 30 mm thick shutters 9.5.3 Kiln seasoned selected planks of sheesham wood. 9.5.3.1 35 mm thick shutters 9.5.3.2 30 mm thick shutters 9.5.4 Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood shutters 9.5.4.1 35 mm thick 9.5.4.2 30 mm thick 209 9.6 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: 9.6.1 Second class teak wood 9.6.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood 9.6.3 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. 9.6.4 Ply wood 5 ply, 9 mm thick : 9.6.4.1 Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. 9.6.4.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type 9.6.5 Ply wood 7 ply, 9 mm thick : 9.6.5.1 Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. 9.6.5.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type 9.6.6 Particle Board 12 mm thick 9.6.6.1 Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. 9.6.6.2 Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. 9.6.6.3 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. 9.6.6.4 Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. 9.6.6.5 Coir Veneer Board (conforming to IS 14842) 12 mm thick 9.6.7 Float glass panes 9.6.7.1 4 mm thick glass pane (weight not less than 10 kg/sqm) 9.6.7.2 5 mm thick glass pane (weight not less than 12.5 kg/sqm) 9.6.8 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading 9.6.8.1 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum 9.6.8.2 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum 210 9.7 Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in- charge and panelling with panels of: 9.7.1 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : 9.7.2 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- lamination conforming to IS : 12823 Grade 1, Type - II marked: 9.7.3 12 mm thick one side pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade -1, Type II marked: 211 9.8 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 9.8.1 Second class teak wood 9.8.1.1 35 mm thick 9.8.1.2 30 mm thick 9.8.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood 9.8.2.1 35 mm thick 9.8.2.2 30 mm thick 9.8.3 Kiln seasoned selected planks of sheesham wood. 9.8.3.1 35 mm thick 9.8.3.2 30 mm thick 9.8.4 Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood 9. 8.4.1 30 mm thick shutters 9. 8.4.2 35 mm thick shutters 212 9.9 Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B) , using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked fixing with M.S. pressed butt hinges bright finished of required size with necessary screws as per directions of Engineer-in- charge. 30 mm thick shutters. 213 9.10 Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 9.10.1 5 mm thick instead of 4 mm thick. 9.10.2 10 to 12 mm float glass 9.10.3 5.5 mm safety glass 9.10.4 10-12mm safety glass 214 9.11 Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). 215 9.12 Deduct for providing pin headed glass panes instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). 216 9.13 Extra for S.S, hinges providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). 217 9.14 Deduct for not providing hinges in doors, windows or clerestory window shutters with : 9.14.1 Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. 9.14.2 ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. 218 9.15 Providing and fixing 25 mm thick Second class teak wood shutters using 4mm float glass for cup board etc. : 9.15.1 Panelled or panelled and glazed shutters : 9.15.1.1 Using ISI marked anodised aluminium butt hinges with necessary screws. 9.15.1.2 Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 9.15.2 Glazed shutters : 9.15.2.1 Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. 9.15.2. 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 219 9.16 Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 9.16.1 12 mm thick 9.16.2 18 mm thick 220 9.17 Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 9.17.1 18 mm thick 9.17.2 25 mm thick 221 9.18 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 9.18.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.18.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.18.3 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. 222 9.19 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.19.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.19.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.19.3 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 223 9.20 Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. 224 9.21 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 225 9.22 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : 9.22.1 Rectangular or square. 9.22.2 Circular. 226 9.23 Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). 227 9.24 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). 228 9.25 Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm in both direction with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws: 9.25.1 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.1.1 Second class teak wood. 9.25.1.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.1.3 Kiln seasoned selected class of sheesham wood. 9.25.2 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.2.1 Second class teak wood. 9.25.2.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.2.3 Kiln seasoned selected class of sheesham wood. 9.25.3 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.3.1 Second class teak wood. 9.25.3.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.3.3 Kiln seasoned selected class of sheesham wood. 9.25.4 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.4.1 Second class teak wood. 9.25.4.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.4.3 Kiln seasoned selected class of sheesham wood. 229 9.26 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568 for doors, windows and clerestory windows including ISI marked M.S. pressed fixing with butt hinges bright finished of required size with necessary screws as per directions of Engineer-in-charge: 9.26.1 35 mm thick shutters 9.26.2 30 mm thick shutters 230 9.27 Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 sand) and making good the walls etc. 231 9.28 Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 9.28.1 25 mm long 9.28.2 32 mm long 9.28.3 40 mm long 9.28.4 50 mm long 9.28.5 60 mm long 232 9.29 Providing and fixing 2nd class teak wood plain lining tongued and grooved including wooden plugs complete with necessary screws and priming coat on unexposed surface. 9.29.1 40 mm thick. 9.29.2 25 mm thick. 9.29.3 20 mm thick 9.29.4 12 mm thick 233 9.30 Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre- laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 9.30.1 12 mm thick 9.30.2 18 mm thick 9.30.3 25 mm thick 234 9.31 Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 235 9.32 Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture. 236 9.33 Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. 237 9.34 Providing and fixing skirting of Pre- laminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 9.34.1 18 mm thick 9.34.2 25 mm thick 238 9.35 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 9.35.1 2nd class teak wood 9.35.1.1 50x12 mm 9.35.1.2 50 x 20 mm 9.35.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.35.2.1 50x12 mm 9.35.2.2 50x20 mm 239 9.36 Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : Second class teak wood. 240 9.37 Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked,, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. 241 9.38 Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842, including top cover of 6 mm coir veneer board, nickle plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. 242 9.39 Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. 9.39.1 Non decorative veneer on both sides. 9.39.2 Particle board with decorative veneering on both sides. 243 9.40 Providing and fixing teak wood lipping of size 25x3 mm in pelmet. 244 9.41 Providing and fixing of 1.25 mm thick chromium plated brass plate, with two chromium plated curtain rods brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 9.41.1 12 mm dia. 9.41.2 20 mm dia. 9.41.3 25 mm dia. 245 9.42 Providing and fixing nickel plated curtain rods M.S. pipe with nickel plated brackets : 9.42.1 20 mm dia (heavy type) 9.42.2 25 mm dia (heavy type) 246 9.43 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.43.1 Fixed to steel windows by welding. 9.43.2 Fixed to openings /wooden frames with rawl plugs screws etc. 247 9.44 Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. 248 9.45 Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. 249 9.46 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. 9.46.1 With 2nd class teak wood beading 62x19 mm. 9.46.2 With 12 mm mild steel U beading. 250 9.47 Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. 251 9.48 Providing 40x5 mm flat (iron hold fast 40 cm long) (0.628 kg) including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) 252 9.49 Providing wooden beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : 9.49.1 Sal wood. 9.49.2 Haldu, Kail, Bija wood. 253 9.50 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 9.50.1 125x65x2.12 mm 9.50.2 100x58x1.90 mm 9.50.3 75x47x1.70 mm 9.50.4 50x37x1.50 mm 254 9.51 Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete : 9.51.1 125x90x4.00 mm 9.51.2 100x75x3.50 mm 9.51.3 75x60x3.10 mm 9.51.4 50x40x2.50 mm 255 9.52 Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 9.52.1 125x65x2.12 mm 9.52.2 100x58x1.90 mm 9.52.3 75x47x1.70 mm 9.52.4 50x37x1.50 mm 256 9.53 Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete : 9.53.1 150x125x27x2.80 mm 9.53.2 125x125x27x2.80 mm 9.53.3 100x125x27x2.80 mm 9.53.4 75x100x20x2.24 mm 257 9.54 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 9.54.1 150 mm 9.54.2 125 mm 9.54.3 100 mm 258 9.55 Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 9.55.1 150 mm 9.55.2 125 mm 9.55.3 100 mm 259 9.56 Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete. 9.56.1 Overall width 35 mm. 9.56.2 Overall width 50 mm. 9.56.3 Overall width 65 mm. 260 9.57 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 9.57.1 300x16 mm 9.57.2 250x16 mm 261 9.58 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 9.58.1 250x10 mm 9.58.2 200x10 mm 9.58.3 150x10 mm 9.58.4 100x10 mm 262 9.59 Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete 263 9.60 Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 9.60.1 300x20x6 mm 9.60.2 250x20x6 mm 264 9.61 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 9.61.1 125 mm 9.61.2 100 mm 9.61.3 75 mm 265 9.62 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 9.62.1 150 mm 9.62.2 115 mm 9.62.3 90 mm 266 9.63 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 9.63.1 300 mm weighing not less than 200 gms. 9.63.2 250 mm weighing not less than 150 gms. 9.63.3 200 mm weighing not less than 120 gms. 267 9.64 Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 450 gms.) 268 9.65 Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete: 9.65.1 300x16 mm 9.65.2 250x16 mm 269 9.66 Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 9.66.1 250x10 mm 9.66.2 200x10 mm 9.66.3 150x10 mm 9.66.4 100x10 mm 270 9.67 Providing and fixing ISI marked 85x42mm stainless steel pull bolt lock with necessary screws bolts, nut and washers etc. complete. 271 9.68 Providing and fixing ISI marked stainless steel door latches with screws etc. complete : 9.68.1 300x20x6 mm 9.68.2 250x20x6 mm 272 9.69 Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : 9.69.1 125 mm 9.69.2 100 mm 9.69.3 75 mm 273 9.70 Providing and fixing stainless steel hasp and staple (safety type) conforming to IS specification with necessary screws etc. complete : 9.70.1 150 mm 9.70.2 115 mm 9.70.3 90 mm 274 9.71 Providing and fixing stainless steel casement stays (straight peg type) conforming to IS specification with necessary screws etc. complete. 9.71.1 300 mm weighing not less than 200 gms. 9.71.2 250 mm weighing not less than 150 gms. 9.71.3 200 mm weighing not less than 120 gms. 275 9.72 Providing and fixing stainless steel safety chain with necessary fixtures for doors. Conforming to IS specification (Weighing not less than 450 gms.) 276 9.73 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 9.73.1 125x64x1.90 mm 9.73.2 100X58X1.90 mm 9.73.3 75x47x1.80 mm 9.73.4 50x37x1.50 mm 277 9.74 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 9.74.1 125x64x2.50 mm 9.74.2 100x60x2.50 mm 9.74.3 75x50x2.50 mm 278 9.75 Providing and fixing 50 mm Stainless steel cup board or wardrobe knob with necessary screws (best make of approved quality) 279 9.76 Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete. 280 9.77 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 9.77.1 125x85x5.5 mm (heavy type) 9.77.2 125x70x4 mm (ordinary type) 9.77.3 100x85x5.5 mm (heavy type) 9.77.4 100x70x4 mm (ordinary type) 9.77.5 75x65x4 mm (heavy type) 9.77.6 75x40x2.5 mm (ordinary type) 9.77.7 50x40x2.5 mm (ordinary type) 281 9.78 Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete : 9.78.1 150x125x27x5 mm 9.78.2 125x125x27x5 mm 9.78.3 100x125x27x5 mm 9.78.4 75x100x20x3.2 mm 282 9.79 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 9.79.1 400x10 mm 9.79.2 250x10 mm 9.79.3 200x10 mm 9.79.4 150x10 mm 9.79.5 100x10 mm 283 9.80 Providing and fixing bright finished brass door latch with necessary screws etc. complete. 9.80.1 300x16x5 mm 9.80.2 250x16x5 mm 284 9.81 Providing and fixing bright finished brass handles with necessary screws etc. complete. 9.81.1 125 mm 9.81.2 100 mm 9.81.3 75 mm 285 9.82 Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete. 9.82.1 300x16mm 9.82.2 250x16mm 286 9.83 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 287 9.84 Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). 288 9.85 Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 289 9.86 Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality). 290 9.87 Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : 9.87.1 40 mm 9.87.2 50 mm 9.87.3 65 mm 9.87.4 75 mm 291 9.88 Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) 292 9.89 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 293 9.90 Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. 294 9.91 Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 9.91.1 300 mm weighing not less than 330 gms 9.91.2 250 mm weighing not less than 280 gms 9.91.3 200 mm weighing not less than 240 gms 295 9.92 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 9.92.1 150 mm 9.92.2 115 mm 9.92.3 90 mm 296 9.93 Providing and fixing Cromium plated brass hanging type floor door stopper with necessary screws, etc. complete. 297 9.94 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. 298 9.95 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. 299 9.96 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 300 9.97 Providing and fixing chromium plated brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 301 9.98 Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality). 302 9.99 Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of : 9.99.1 Size 40 mm 9.99.2 Size 50 mm 9.99.3 Size 65 mm 9.99.4 Size 75 mm 303 9.100 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. 304 9.101 Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete. 9.101.1 300x16mm 9.101.2 250x16mm 305 9.102 Providing and fixing chromium plated brass tower bolts ISI marked with nuts and screws etc complete. 9.102.1 400X10mm 9.102.2 300x10mm 9.102.3 250x10mm 9.102.4 200x10 mm 9.102.5 150x10 mm 9.102.6 100x10 mm 306 9.103 Providing and fixing chromium plated brass door latch ISI marked with necessary screws etc complete. 9.103.1 300x16x5mm 9.103.2 250x16x5mm 307 9.104 Providing and fixing chromium plated brass night latch ISI marked with necessary screws etc complete. 308 9.105 Providing and fixing chromium plated brass handles with necessary screws etc. complete: 9.105.1 125 mm 9.105.2 100 mm 9.105.3 75 mm 309 9.106 Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. 310 9.107 Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : 9.107.1 300 mm weighing not less than 330 gms 9.107.2 250 mm weighing not less than 280 gms 9.107.3 200 mm weighing not less than 240 gms 311 9.108 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note:- Aluminum hinges shall not be used in wooden shutters. 9.108.1 125x75x4 mm 9.108.2 125x63x4 mm 9.108.3 100x75x4 mm 9.108.4 100x63x4 mm 9.108.5 100x63x3.2 mm 9.108.6 75x63x4 mm 9.108.7 75x63x3.2 mm 9.108.8 75x45x3.2 mm 312 9.109 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 9.109.1 300x16 mm 9.109.2 250x16 mm 313 9.110 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 9.110.1 400X10mm 9.110.2 300x10 mm 9.110.3 250x10 mm 9.110.4 200x10 mm 9.110.5 150x10 mm 9.110.6 100x10 mm 314 9.111 Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. 315 9.112 Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 316 9.113 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 9.113.1 125 mm 9.113.2 100 mm 9.113.3 75 mm 317 9.114 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 9.114.1 Single rubber stopper 9.114.2 Twin rubber stopper 318 9.115 Providing and fixing aluminium casement window stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 319 9.116 Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. 320 9.117 Providing and fixing aluminum U beading of required size to Pre-laminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge. 321 9.118 Providing and fixing PTMT handles with necessary screws etc. complete. 9.118.1 125x34x24 mm weighing not less than 23 gms. 9.118.2 150x34x24 mm weighing not less than 26 gms. 322 9.119 Providing and fixing PTMT Butt hinges with necessary screws etc. complete. 9.119.1 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms. 9.119.2 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. 323 9.120 Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 9.120.1 152x42x18 mm weighing not less than 60 gms. 9.120.2 202x42x18 mm weighing not less than 78 gms. 324 9.121 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. 325 9.122 Providing and fixing PTMT hanging type floor door stoper with necessary screws etc complete. 326 9.123 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 9.123.1 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.123.1.1 Second class teak wood. 9.123.1.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.1.3 Kiln seasoned selected class of sheesham wood. 9.123.2 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.123.2.1 Second class teak wood. 9.123.2.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.2.3 Kiln seasoned selected class of sheesham wood. 9.123.3 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.123.3.1 Second class teak wood. 9.123.3.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.3.3 Kiln seasoned selected class of sheesham wood. 9.123.4 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.123.4.1 Second class teak wood. 9.123.4.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.4.3 Kiln seasoned selected class of sheesham wood. 327 9.124 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. 9.124.1 With 2nd class teak wood beading 62x19 mm. 9.124.2 With 12 mm mild steel U beading. 328 9.125 Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Haldu, Kail, Bija wood in scantling of section 50x25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. 329 9.126 Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height). 330 9.127 Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer- in-charge. 331 9.128 Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. 332 9.129 Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality). 9.129.1 Triple strip vertical type. 9.129.2 Double strip (horizontal type). 333 9.130 Providing and fixing magic eye in door shutters including fixing. Complete (Best make of approved quality). 334 9.131 Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge. 9.131.1 300mm long 9.131.2 450mm long 9.131.3 500mm long 335 9.132 Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) 336 9.133 Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. 9.133.1 Marine plywood conforming to IS: 710 9.133.2 Fire retardant plywood conforming to IS: 5509. 337 9.134 Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 9.134.1 1.5 mm thick. 9.134.2 1.0 mm thick. 338 9.135 Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge. 339 9.136 Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in- Charge. 9.136.1 With decorative veneering on one side and commercial veneering on other side. 9.136.2 With non decorative veneering on both sides. 340 9.137 Providing and fixing factory made shutters of 25 mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium U type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of U beading and hinges will be paid for separately). 341 9.138 Providing and fixing in wall lining MDF board medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 9.138.1 12 mm thick. 9.138.2 18 mm thick. 9.138.3 25 mm thick. 342 9.139 Providing and fixing 25mm thick pre- laminated medium density fibre board exterior grade(Grade-I) IS:14587:1998 marked one side decorative to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S. piano hinges IS:3818 marked with necessary screwed complete 343 9.140 Providing and fixing skirting with Pre- laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand complete. 9.140.1 18 mm thick 9.140.2 25 mm thick 344 9.141 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete. 9.141.1 75mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3 1996 Board with BIS certification marks. 9.141.2 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part I 1996 Board with BIS certification marks. 9.141.3 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./sq.cm. 9.141.4 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw. 9.141.5 68mm overall thickness partition using 9mm thick Heavy Duty Fibre Cement Board double skin non asbestos, reinforced with cellulose fibre,manufactured through autoclaving proces(High presssure steam cured)Type A, Category 4 conforming to IS 14862:2000. (for wet areas) 9.141.6 70 mm overall thickness Partition using 10mm thick double skin non-asbestost multipurpose termite, fire & moisure resistance (acoustic 30db) cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 345 9.142 Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the W profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm, placed @ 610mm C/C with fully threaded self- tapping dry wall screws. Board is fixed to the W profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing and directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 9.142.1 10 mm thick tapered edge calcium silicate board made with calcareous and siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure, with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. 9.142.2 12 mm thick Gypsum board conforming to IS: 2095 Part-I. 9.142.3 8 mm thick non-asbestost multipurpose termite, fire & moisure resistance cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 9.142.4 8mm Both side Factory Prelamianted cement bonded particle board as per IS: 15786. 9.142.5 9mm thick non asbestos,heavy duty fibre cement board reinforced with cellulose fibre manufactured through autoclaving process(High pressure steam cured) Type A,Category 4, conforming to IS 14862. 346 9.143 Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically and horizontally ) including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer- in-charge. 347 9.144 Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 348 9.145 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately). 9.145.1 Board 12 mm thick 9.145.2 Board 18 mm thick 349 9.146 Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 9.146.1 18 mm thick 9.146.2 25 mm thick 350 9.147 Providing and Installation of acoustical wall panelling fabric finish hardened square edge, FR grade fabric (colour as approved by Egnineer in charge) wrapped soft fibre core (glass fibre) panel having metal framing, of size 600x2100x25mm having density 100-120Kgs/ m3, weight 3.0kg/m2 NRC up to 0.9 installed by using impaling clip. Impaling clips are attached directly to the wall/frame work with the points extending outward. Then panels shall positioned and pressed into place. 351 9.148 Providing and installation of acoustical wall panelling wood finish Slats made out of HDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts bothways. 352 9.149 Providing and installation of paintble acoustic wall panelling consisting of strand kerfed edge paint finished as approved by Engineer in charge. magnesite bonded wood fiber panels of size 600x2400x20mm having density 400kg/m3, weight 8- 20kg/m2 which is fixed to GI strut system. fastened to wall positioned horizontally in a regular manner at 600mm centers. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channel at 600mm centers. The Kerfed edge panels shall be then inserted into the H-spline against wall to perfect fit. 9.149.1 Wt. 8.20 kg/m2 9.149.2 Wt. 4.2 kg/m2 353 9.150 Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-incharge. (Frame work shall be paid forseparately) 9.150.1 12mm thick commercial ply conforming to IS: 1328 BWR type. 9.150.2 18mm thick commercial ply conforming to IS: 1328 BWR type. 354 9.151 Providing and Installation of acoustic wall panelling consisting of Soak Coard of selected colours as approved by Engineer in charge. Kerf edge Fabric wrapped wood fiber panels of size 600x2400x20mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI strut system. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channels at 600mm centers. Kerfed edge Fabric wrapped panels shall be then inserted into the H-spline against wall to perfect fit. 355 9.152 Providing and Installation of acoustic wall panelling consisting of Soak Cord of selected colours as approved by Engineer in charge, square edge Fabric wrapped wood fiber panels of size 600x1200x10mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI struts,Z bars. GI Z bars having 40mm height, thickness 1.2mm is first fixed behind the panels by identifying resin spots by using suitable fasteners.Clean exposed surfaces of wall and ensure walls are in plumb line before installing on wall (provide necessary packing shims if required). Soak cord square edge panels shall be slided into the Z bars fixed on wall. 356 9.153 Providing and installation of acoustic wall panelling consisting of Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch Tracks half wrap/ full wrap 25mm and Midseam 300mm centers. The fabric is stuck on the Align Tape (by removing the protective cover) at the same time as being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module width would be 1600mm. 357 9.154 Providing and Installation of wall panelling consisting of Square edge Magnesia core panels of size 1100x2400x8mmmm having density 1000kgs/m3, weight 8kg/m2 installed by using GI Strut system. The GI struct system includes Cross channel having thickness 0.45mm, length 3600mm, knurled web 40, depth 10mm and equal flanges of 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. The panels to be fixed on the cross channel with suitable fasteners. 358 9.155 Supplying and installation of magnesia block 66 mm thick drywall partition including Framework includes Floor/ Head GI channels having thickness 0.5mm, length 3600mm, equal flanges of 32mm and web of 50mm fixed to floor and ceiling with suitable fasteners at 300mm centers staggered. Second layer of magenesia oxide block 8mm thick should be fixed other side of the frame work similar fashion as the first layer. 3mm gap should be maintained between boards.3 mm gap shall be filled with jointing compound. Magnesia oxide block shall have following physical charecterstics. 9.155.1 Using 8mm thick magnesia block 9.155.2 Using10mm thick magnesia block 9.155.3 Using12mm thick magnesia block 9.155.4 Using12mm thick magnesia block 359 9.156 Add extra for providing and fixing Thermal insulation by providing 50mm thick synth PF having dencity 1000 GSM within the cavity held in position by using chicken wire mesh/ cross bracing/ pasting to the wall. 360 9.157 Providing and laying Gypsum panel partitions 100mm thick with water proof Gypsum panels of size 666x500x100mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor II level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2. 361 9.158 Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge: 9.158.1 Extruded section Profile size 48x40 mm. 9.158.2 Extruded section Profile size 42x50 mm. 362 9.159 Providing and fixing Panelled UPVC door shutter to existing door frames. 24 mm thick factory made UPVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). 363 9.160 Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. 364 9.161 Providing and fixing 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. The Top and Bottom edges of the shutter are covered with an end-cap of the size 25mmx11mm. Door shutter shall be reinforced with special polymeric reinforcements as per required specification and direction of Engineer-in- charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. 365 9.162 Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mmx37mm with wall thickness 2mm (±0.2mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos. of plastic brackets of size 100mmx37mm, wall thickness 2mm (+0.2mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100mmx20 mm, and inserting 2 nos. tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-charge. 366 9.163 Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mmx53 mm, having wall thickness 2.0mm (±0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x2mm thickness (± 0.2 mm) and 75mmx200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. and sizes of anchor dash fastener, all complete as per manufacturers specification and direction of engineer-in-charge. 367 9.164 Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115mm x 37mm with wall thickness , panels of 100 x 20 mm printed and laminated and inserting 2 nos. 6 mm dia. bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-Charge. 368 9.165 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in- Charge. 369 9.166 Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall have a coat of steel primers and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. 9.166.1 Plain PVC door shutters. 9.166.2 Pre laminated PVC door shutters. 370 9.167 Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width and 32 mm thickness, frame will be mitred and Jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. 371 9.168 Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mmx30 mm having wall thickness 5 mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturers specifications and direction of Engineer-in-charge: 9.168.1 Non decorative finish. 9.168.2 Decorative finish (both side wood grained finish). 372 9.169 Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) 9.169.1 Single rebate (75 mm X 50 mm) 9.169.2 Single rebate (100 mm X50 mm) 9.169.3 Single or double rebate (125 mm X 65 mm) 373 9.170 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 9.170.1 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter 9.170.2 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter 9.170.3 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter 9.170.4 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter 374 9.171 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 9.171.1 30 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 9.171.2 35 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 375 9.172 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 9.172.1 18 mm thick 9.172.2 25 mm thick 376 9.173 Providing and fixing factory made single extruded WPC (Wood polymer composite solid plain white color board for backing of cupboards and bathrooms/ kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-in-Charge. (Note: stainless steel screws shall be paid separately) 9.173.1 6 mm thick 9.173.2 12 mm thick 377 9.174 Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. 378 9.175 Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5 mm (±0.2 mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2nos of PVC bracket of size 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge. 379 9.176 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5mm (±0.2mm) thick, having styles and rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125 mm x11 mm, including providing 5mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturers specification and direction of Engineer-in- charge. 9.176.1 Non decorative finish (matt finish). 9.176.2 Decorative finish (wood grained finish). 380 9.177 Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. 381 9.178 Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stat shall be provided 382 9.179 Providing and fixing to existing door frames. 30 mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames. 383 9.180 Providing and fixing door frame FRP 30mm thick fiberglass reinforced Plastic (F.R.P.) flush door shutter in different plain and wood inish made with fire retardant grade unsaturated polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. 384 9.181 Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather and sunlight. 385 9.182 Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in- charge (Dash fastener to be paid for separately). 386 9.183 Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II) tested and certified as per laboratory approved by Engineer-in-charge with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). 387 9.184 Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc. complete all as per direction of Engineer- in-charge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance. 388 9.185 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch and Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. 389 9.186 Providing and Fixing factory made UPVC door frame made of UPVC exturded sections, of size 65 mmx55 mm with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mmx30 mm having wall thickness 2 mm (±0.2mm), including providing and fixing 3 nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number and size of anchor dash fastners, all complete as per manufacturers specification and direction of Engineer-in-charge. 390 9.187 Providing and Fixing, UPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mmx100 mm long fasteners, all complete as per direction of Engineer-in-charge. (Glazing, hardware hinges and fitting etc. to be paid separately.) 9.187.1 Casement Window (Outward/Inward opening) with hinge System. 9.187.1.1 Frame (50 mm x 50mm) 9.187.1.2 Sash (Style and Rail) (62 mm x 34 mm) 9.187.1.3 Mullion (intermediate Section) (66mm x 50 mm) 9.187.1.4 ‘T Profile (one vertical length in between two shutters) (24mm x 34.5mm) 9.187.1.5 Glazing bead (12mm x 18mm) 9.187.2 Casement Window (With friction hinge and outward opening) 9.187.2.1 Casement Frame (67mm x 62mm) 9.187.2.2 Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) 9.187.2.3 Casement Glazing bead (35mm x 18 mm) 9.187.3 Sliding Window (Two Track, 2/4 Shutters) 9.187.3.1 Two Track Sliding Frame (67mm x 52mm) 9.187.3.2 Sliding window Sash (60mm x 44mm) 9.187.3.3 Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) 9.187.3.4 Sliding Glazing bead (35 mm x 18 mm) 9.187.4 Sliding Door (Two Track, 2/4 Shutters) 9.187.4.1 Two Track Sliding Frame (67mm x 52mm) 9.187.4.2 Sliding Door Sash (80mm x 44mm) 9.187.4.3 Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) 9.187.4.4 Sliding Glazing bead (35 mm x 18 mm) 391 9.188 Providing and fixing stainless steel (SS- 304 grade) friction hinges to the side/ top hung UPVC windows, of approved quality with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 9.188.1 200 x 19 x 1.9 mm 9.188.2 250 x 19 x 1.9 mm 9.188.3 300 x 19 x 1.9 mm 9.188.4 350 x 19 x 1.9 mm 9.188.5 400 x 19 x 1.9 mm 392 9.189 Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. 393 9.190 Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete. 394 9.191 Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete. 395 9.192 Providing and fixing steel roller for UPVC sliding door with necessary screws etc. complete. 396 9.193 Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete. 397 9.194 Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.194.1 Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) 9.194.2 Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). 9.194.3 Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). 9.194.4 Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) 9.194.5 Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) 9.194.6 Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion 67 x 80 all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) 398 9.195 Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic capsof approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.195.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) 399 9.196 Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.196.1 Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). 9.196.2 Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). 400 9.197 Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.197.1 Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) 9.197.2 Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 9.197.3 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). 9.197.4 Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). 9.197.5 Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) 401 9.198 Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.198.1 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm). 9.198.2 Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). 402 9.199 Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madAfter fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Note: - For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.199.1 Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 10.00 sqm). 9.199.2 Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto10.00 sqm). 9.199.3 Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) 9.199.4 Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) 403 9.200 Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture PVC beading as gap insert below top and bottom rail joined together using solvent cement adhesive. An additional 5mm thick Prelaminated PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in- charge. Manufacturer’s specification and drawing. 30 mm thick pre laminated PVC door shutters. 404 9.201 Providing and fixing factory made integral PVC flush door shutter made from rigid PVC foam sheet (Single Extruded) with density not less than 600 kg/cum, conforming to IS: 2380 part 14 for screw holding strength with Celluka finish surfaces on both sides at the manufacturing process itself, manufactured by an ISO : 9001 -2000 certified company. 9.201.1 24 to 25 mm thick plain solid PVC flush door shutter 9.201.2 28 to 30 mm thick plain solid PVC flush door shutter 405 9.202 Providing and fixing factory made pre laminated solid PVC flush door shutters 28 to 30 mm thick made from co-extruded three layer rigid PVC foam sheet with density not less than 600 kg/cum, conforming to IS: 2380 part 14, for screw holding strength and outer layers laminated on both sides by laminated sheet with density not less than 1400 kg/cum, lamination shall be at the manufacturing process itself and manufactured by an ISO: 9001-2000 certified company. 9.202.1 1mm thick laminated sheet 9.202.2 0.12 mm thick laminated sheet 406 9.203 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) laminated type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens with well matched 3mm thick commercial 3ply veneering consisting of vertical grains, cross bands withing frame of door/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS: 2202. The rate shall be inclusive of all material and labour complete and as per specification and dirction of Engineer-in-Charge. 9.203.1 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 9.203.2 35mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 9.203.3 25mm thick (for cupboard) including 3 nos. 75mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 407 9.204 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) non decorative type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens (strips) and frame of kiln seasoned and chemically treated, finger jointed cross bands including all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50cm. Each shutter shall be factory made to the exact opening size within frame of doors/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and confirmity with IS:2202. 9.204.1 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary. 9.204.2 30mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 9.204.3 25mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 408 9.205 Deduct for not providing 2nd class teak wood batten lipping in factory made shutters i.e. item no 9.203 and 9.204. 409 9.206 Providing & fixing acrylic solid surface in thickness 4/6/12 mm of approved colour made out of non-porous surfacing material homogeneously composed of ± 1/3 acrylic resin (also known as PolyMethyl Methacrylate -PMMA), and ± 2/3 NO extra shall be paid for joint adhesive, silicon or related accessories and for transportation. Item should cover 5 years, commercial warranty of product as per FCWS norms. The product should be UV protected for exterior applications & LGA hyginene tested anti bacterial for health care application areas. Area of application are Table Tops, Exterior facade cladding, health care areas like modular operation theater hospital scrubs, wash basins, partition & paneling, laboratory commercial show room, hotels, office & residential areas. 9.206.1 Acrylic Solid Surface sheet – Glacier white designer white 9.206.1.1 6 mm thick sheet 9.206.1.2 12 mm thick sheet 9.206.2 Acrylic Solid Surface sheet - Any Solid colours/Hospital use Medi Blue 9.206.2.1 6 mm thick sheet 9.206.2.2 12 mm thick sheet 9.206.3 Acrylic Solid Surface sheet - Any other 9.206.3.1 6 mm thick sheet 9.206.3.2 12 mm thick sheet 410 9.207 Providing and fixing of 8 mm thick non asbestos multipurpose board reinforced with cellulose fibers for wall cladding will consist of following operations:1. Fixing of a layer of 6mm Moisture/fire Resistance Heavy Duty fibre cement Boards over above mentioned 6 mm heavy duty fibre cement board with the help of 25mm self drilling, self tapping Fibre Cement screws @ 300mm c/c. All external corners are to be protected with the use of suitable corner profile of GI or PVC. All above operation is to be done in order and as directed by Engineer-in-Charge.(frame work to be paid separately). 411 9.208 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS: 15380(2003), eco-friendly, termite resistant, borer free, anti warping phenol formaldehyde (PF), decorative designe moulded or rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company’ gujcon, century, green shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.208.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.208.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.208.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. 412 9.209 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), non decorative designe moulded and labor complete as per specifications and direction of engineer-in- charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.209.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.209.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws 9.209.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. 413 9.210 Providing and fixing IS marked factory made High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), 2 and 4 Panel designe moulded or plain construction with particle board shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.210.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.210.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 414 9.211 HDF decorative prelaminated pine wood panel door with glass / wiremash:- Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.211.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.211.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 415 9.212 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), . The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.212.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.212.2 32 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.212.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. Piano hinges with screws. 416 9.213 Non Decorative Pine Wood Flush Door:- Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer- in-charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202 9.213.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.213.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.213.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 417 9.214 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned sheet shall be as per IS: 2046 type S of approved quality. Each shutter shall be factory made to the exact size (opening) within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in- charge. 9.214.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.214.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.214.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 418 9.215 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in-charge. 9.215.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.215.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.215.3 25mm thick (for cupboard) including 3 nos. 75 mm long ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 419 9.216 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) veneer decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) s and commercial grade face veneers on both outer faces of shutters including kiln seasoned and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. 9.216.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.216.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.216.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 420 9.217 Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides,made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastne with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. 421 9.218 Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity.Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. 422 10.1 Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 423 10.2 Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 424 10.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required. 425 10.4 Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer. 426 10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 10.5.1 Using M.S. angels 40x40x6mm for diagonal braces 10.5.2 Using flats 30x6mm for diagonal braces and central cross piece. 427 10.6 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454- part-1 and M.S. top cover of required thickness for rolling shutters. 10.6.1 80x1.25mm M.S. laths with 1.25 mm thick top cover. 10.6.2 80x1.20 mm M.S. laths with 1.20 mm thick top cover. 10.6.3 80x0.90 mm M.S. laths with 0.90 mm thick top cover. 428 10.7 Extra for providing suitable mechanical device chain and crank operation for operating rolling shutters. 10.7.1 Exceeding 10.00 sqm and upto 16.80 sqm in the area. 10.7.2 Exceeding 16.80 sqm in area. 429 10.8 Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-Charge. (Area of grill to be measured). 430 10.9 Providing and fixing ball bearing for rolling shutters. 431 10.10 Providing and fixing factory made ISI marked glazed steel doors, windows and ventilators side /top /centre hung with beading and Z-section all members such as F7D, F4B, K11 B and K12 B and other tubular section member etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). 10.10.1 Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). 10.10.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.10.3 Extra for providing and fixing steel beading of size 10x10x1.6mm (box type) approved shape and section with screws instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. 432 10.11 Providing and fixing L-iron or T-iron frames for doors, windows and ventilators of mild steel L-section or T-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 10.11.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 433 10.12 Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge: 10.12.1 Profile B of 1.60mm thick single rebate of size 80mmx50mm 10.12.1.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.1.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.2 Profile C of 1.60mm thick single rebate of size 100mmx50mm 10.12.2.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.2.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.3 Profile E of 1.60mm thick double rebate of size 115mmx50mm 10.12.3.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.3.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.4 Profile B of 1.25mm thick single rebate of size 80mmx50mm 10.12.4.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.4.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.5 Profile C of 1.25mm thick single rebate of size 100mmx50mm 10.12.5.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.5.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.6 Profile E of 1.25mm thick double rebate of size 115mmx50mm 10.12.6.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.6.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 434 10.13 Providing and fixing M.S. Tubular frames and shutters or frames only or shutters only for doors, windows, ventilators and cupboard with any sections, made of 1.60 mm or 1.25 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size as per drawing, including fixing of necessary butt hinges, stays and screws and applying a priming coat of approved steel primer excluding cost of all fittings such as handles, tower bolts, sliding door bolts, latches etc. and panels. 10.13.1 Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). 10.13.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 435 10.14 Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.14.1 Hot finished welded type tubes 10.14.2 Hot finished seamless type tubes 10.14.3 Electric resistance or induction butt welded tubes. 436 10.15 Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats of Epoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. 437 10.16 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. 438 10.17 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 16mm dia M.S. bar bent to shape as per standard drawing. 439 10.18 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. 440 10.19 Providing and fixing bolts including nuts and washers complete. 441 10.20 Providing and fixing M.S. rivets of sizes in position. 442 10.21 Welding by gas or electric plant including transportation of plant at site etc. complete. 443 10.22 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.22.1 In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. 10.22.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 444 10.23 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer. 10.23.1 M.S. tube. 10.23.2 E.R.W. tubes. 445 10.24 Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. 10.24.1 10x60 mm 10.24.2 10x80 mm 10.24.3 10x120 mm 10.24.4 10x140 mm 10.24.5 10x160mm 446 10.25 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 447 10.26 Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete. 10.26.1 Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides 10.26.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. 448 10.27 Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. 10.27.1 With 4.0 mm thick glass panes 10.27.2 With 5.50 mm thick glass panes 10.27.3 With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. 10.27.4 With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm box beading. 10.27.5 With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. 10.27.6 With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. 10.27.7 With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. 10.27.8 With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. 449 10.28 Add extra for providing and fixing froasted glass instead of float glass. 10.28.1 With 4.0 mm thick glass panes. 10.28.2 With 5.5 mm thick glass panes. 450 10.29 Supplying at site: 10.29.1 R.C.C. Standards post/ struts/rails/ poles of mix 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge including fixing (cost of earth works in excavation, concrete works in foundation to be paid separately). 10.29.2 Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) 10.29.3 Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately). 451 10.30 Supplying and fixing turn buckles and straining bolts for barbed wire fencing. (Labour rate only). 452 10.31 Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) with GI barbed wire. 453 10.32 Fencing with barbed G.I. wire angle iron post placed fitted to at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. 454 10.33 Fixing Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, painting, earth work in excavation and cement concrete to be paid for separately). (Labour rate only). 455 10.34 Providing and fixing G.I. or PVC coated G.I.wire chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting earthwork & c.c. to be paid separately) 10.34.1 Made of G.I. wire. 10.34.2 Made of G.I. wire, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. 456 10.35 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete, with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer-in- Charge. (cost of post painting earth work & C.C. to be paid separately) 457 10.36 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). 458 10.37 Providing and fixing of ISI marked insulated fire rated GI Sheet doors conforming to FD 120-PI classification of IS 3614:2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating. The Door frame shall be single rebate grooved profile of size minimum 125 mm x 75mm made out of 1.50mm minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembled with bolting system. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip of size 10x4mm. All provisions should be mortised & provided with necessary inbuilt reinforcement to receive appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves (Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note:- For grouting of Steel frames in masonary installations ;cement slurry of 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be recommended except head member(Payable in extra item). Door leaf should be minimum 60mm thick fully flush double skin door. Door leaf must be manufactured from minimum 1.2mm thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 96 kg/cum. All doors shall befactory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size 100x 89x3 mm along with all suitable hardware (Payable in extra item).Vision lite size 185x285 (max area up to 0.06sqm) wherever applicable should be provided with single layered clear fire rated glass panes as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clip on arrangement. The glass will be provided with fire rated ceramic tape of min. 2 mm thickness with min. 15mm width al around on either face. Every Glass pane must carry a permanent marking of its glass manufacturer 459 10.38 Providing and fixing of factory make air tight casement windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 10.38.1 Openable window 10.38.2 Fixed windows 460 10.39 Providing and fixing of factory make single rebate openable/fixed windows made of roll formed galvanized pre- pained steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick) heavy duty pivot hinges per shutter and window fitted without glazing including 10mm square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. 10.39.1 Openable single rebate window 10.39.2 Fixed single rebate window 461 10.40 Providing and fixing of factory make double rebate windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self- expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete.. 10.40.1 Openable double rebate window 10.40.2 Fixed double rebate window 462 10.41 Providing and fixing of factory make fixed louvers fabricated from roll formed sections made of galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated/powder coated Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. (glazing shall be paid separately as per SOR rate) 463 10.42 Providing and fixing of factory make pre painted steel sliding window 2 track-2 panel sliding window fabricated from roll formed sections made of galvanized steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 464 10.43 Providing and fixing pre painted steel sliding window 3 fabricated from Roll formed sections made of galvanized Steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 465 11.1 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) 20mm nominal size stone aggregate in panels finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.(Area of panel not to exceed 2.0 sqm) 466 11.2 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 467 11.3 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 468 11.4 Cement plaster skirting 18 mm thick (upto 30 cm height) with cement mortar 1:3 (1 cement: 3 sand) finished with a floating coat of neat cement. 469 11.5 Cement concrete pavement with Cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete. 470 11.6 Making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. 471 11.7 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) 11.7.1 Dark shade pigment with ordinary cement. 11.7.2 Light shade pigment with white cement. 11.7.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.7.4 White cement without any pigment. 11.7.5 Light shade pigment with ordinary cement. 11.7.6 Ordinary cement without any pigment. 472 11.8 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. (Area of panel not to exceed 2.0 sqm) 11.8.1 Dark shade pigment with Ordinary cement. 11.8.2 Light shade pigment with white cement. 11.8.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.8.4 White cement without any pigment. 11.8.5 Light shade pigment with ordinary cement. 11.8.6 Ordinary cement without any pigment. 473 11.9 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) 11.9.1 Dark shade pigment with ordinary cement. 11.9.2 Light shade pigment with white cement. 11.9.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.9.4 White cement without any pigment. 11.9.5 Light shade pigment with ordinary cement. 11.9.6 Ordinary cement without any pigment. 474 11.10 Marble chips skirting (upto 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 sand) : rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix :7 marble chips) by volume : 11.10.1 Dark shade pigment with ordinary cement. 11.10.2 Light shade pigment with white cement. 11.10.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.10.4 White cement without any pigment. 11.10.5 Light shade pigment with ordinary cement. 11.10.6 Ordinary cement without any pigment. 475 11.11 Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width including cost of forming, nosing etc. 476 11.12 Providing and fixing glass strips 40 mm wide and 4 mm thick in joints of terrazo/ cement concrete floors. 477 11.13 18 mm thick crazy marble stone white, black or as specified marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc.complete . 478 11.14 Precast terrazo tiles 22mm thick with graded marble chips of size upto12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : 11.14.1 Light shade using white cement. 11.14.2 Medium shade using 50%white cement and 50% ordinary cement. 11.14.3 Dark shade using ordinary cement. 11.14.4 Ordinary cement without any pigment. 479 11.15 Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. 480 11.16 Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : 11.16.1 Light shade pigment using white cement. 11.16.2 Medium shades pigment using 50% white cement and 50% ordinary cement. 11.16.3 Dark shade pigment using ordinary cement. 11.16.4 Ordinary cement without any pigment. 481 11.17 Chequeredterrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : 11.17.1 Light shade pigment using white cement. 11.17.2 Medium shade pigment using 50% white cement, 50% ordinary cement. 11.17.3 Dark shade pigment using ordinary cement. 11.17.4 Ordinary cement without any pigment. 482 11.18 Chequered precast cement concrete tiles any finish, any size 22 mm thick IS:13810-1993 ISI mark in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, 15mm thick screed bad in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. 11.18.1 Light shade pigment using white cement. 11.18.2 Medium shade pigment using 50% white cement 50% Grey cement. 11.18.3 Dark shade pigment using ordinary cement. 11.18.4 Ordinary cement without any pigment. 483 11.19 Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sandand grey cement slurry, joints treated with white cement mixed with pigment to match colour of stone including rubbing and polishing complete with : (area of slabs over 0.5 sqm) 11.19.1 Makrana white second quality. 11.19.2 Raj Nagar plain. 11.19.3 Agaria White/Morgarh 11.19.4 Katni marble 11.19.5 Black Zebra. 11.19.6 Udaipur / Baroda green marble 11.19.7 Pink plain marble. 11.19.8 Jaisalmer Yellow 484 11.20 Marble stone 18 mm thick in riser of step, skirting, dado and pillar laid on 12 mm average thick cement mortar 1:3 (1 cement: 3 sand and laid with white cement slurry) joints treated with white cement mixed with pigment to match the shade of the slab i/c rubbing and polishing complete. (area of slab over0.50sqm.) 11.20.1 Makrana white second quality. 11.20.2 Raj Nagar plain. 11.20.3 Agaria White/Morgarh 11.20.4 Katni marble 11.20.5 Black Zebra. 11.20.6 Udaipur / Baroda green marble 11.20.7 Pink plain marble. 11.20.8 Jaisalmer Yellow 485 11.21 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). (Area of slabs over 0.50 sqm.) 11.21.1 Makrana white second quality. 11.21.2 Raj Nagar plain. 11.21.3 Agaria White/Morgarh 11.21.4 Katni marble 11.21.5 Black Zebra. 11.21.6 Udaipur / Baroda green marble 11.21.7 Pink plain marble. 11.21.8 Jaisalmer Yellow 486 11.22 Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. 11.22.1 Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black 11.22.2.1 Granite fine grained dark crystal of other colours and various patterns 11.22.2.2 Granite coarse grained light black/ light red/white with crystal of other colours and various patterns 11.22.2.3 Granite grey/pink/brown with various patterns 11.22.3 Cuddpah stone 487 11.23 Extra for prefinished nosing to treads of steps of marble stone. 488 11.24 Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 metre. 489 11.25 Extra for prefinished grooves to treads of steps of granite stone 490 11.26 Providing and laying machine cut, mirror polished, Italian Marble stone (18 mm thick Italian Marble stone slab, Perlato, Rosso erona, Fire Red or Dark Emperadore etc.)work in flooring laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry mixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 491 11.27 Providing and fixing machine cut, mirror / eggshell polished , Marble stone work 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. for wall lining (veneer work) including dado, skirting, risers of steps etc. thick cement mortar 1:3 (1 cement : 3 sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. 492 11.28 Italian marble flooring in required design and patterns 11.28.1 Providing and laying machine cut, mirror polished Italian Marble stone 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadoreetc flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Note – This item shall be executed only after the prior approval of Chief Engineer. 493 11.29 Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). 111.29.1 Area of slab over 0.50 sqm 11.29.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.1.3 Gray/Pink/Brown or equivalent with various patterns 11.29.2 Area of slab upto 0.50 sqm 11.29.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.2.2 Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.2.3 Gray/Pink/Brown or equivalent with various patterns 494 11.30 Providing and laying gang saw cut 18 mm thick, mirror polished premoulded (wherever required) and pre polished machine cut granite stonework in flooring of required size shape of approved shade, color and texture in flooring laid over 20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand) including grouting the joints with white cement mixed with matching pigments epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 11.30.1 Area of slab over 0.50 sqm 11.30.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.1.3 Gray/Pink/Brown or equivalent with various patterns 11.90.2 Area of slab upto 0.50 sqm 11.30.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.2.2 Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.2.3 Gray/Pink/Brown or equivalent with various patterns 492 11.31 Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. (area of slab more than 0.50 sqm) 11.31.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.31.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter 11.31.3 Gray/Pink/Brown or equivalent with various patterns 495 11.32 Deduct for not polishing granite flooring (item no 11.29 & 11.30) 496 11.33 Providing and laying Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and as directed by the Engineer-in-Charge Granite stone slab Dark Black. Dark Red, White or equivalent, 11.33.1 Flamed Finish Polish 11.33.2 Leather Finish Polish 497 11.34 Granite stone work 18mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement:3 sand) and jointed with white cement slurry mixed with pigment to match the shade of slab. 498 11.35 Providing and fixing 10x10x7.50 cm Granite stone block hand cut andchisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 sand) with joints 10mm wide filled with same mortar mixed with matching pigment including ruled pointing etc. complete as per direction of engineer-in charge. 499 11.36 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm) 500 11.37 Deduction for using 20 mm thick slab instead of 25 mm thick slab of kota stone in item no 11.35 501 11.38 Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 502 11.38.1 10-12 mm thick 11.38.2 20 mm thick 503 11.39 Kota stone slab (area less than 0.5 sqm) rough chiseled dressed average 40 mm thick flooring for parking and open area of thickness over 20 mm (average) thick base laid over and jointed with grey cement slurry complete with base of cement mortar 1:4 (1 Cement : 4 Sand) 504 11.40 Providing edge moulding to 18mm thick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 11.40.1 Marble work 11.40.2 Granite work. 505 11.41 Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. 506 11.42 Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 507 11.43 Mirror polishing on marble work/Granite work/stone work wherever required to give high gloss finish complete. 508 11.44 Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1cement : 5 sand) with joints finished flush. 11.44.1 Red sand stone 11.44.2 White sand stone 11.44.3 Grey lime stone 11.44.4 Kota stone 509 11.45 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. 11.45.1 Red sand stone 11.45.2 White sand stone 510 11.46 40 mm thick machine rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) mixed with pigment to match the shade of stone and pointing with same mortar 11.46.1 Red sand stone 11.46.2 White sand stone 511 11.47 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. 512 11.48 Extra for Kota stone/ sand stone in treads of steps and risers using single length upto 1.05 metre. 513 11.49 Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 514 11.50 Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. 515 11.51 Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete. 516 11.52 Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete. 517 11.53 Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete. 518 11.54 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. 519 11.55 Deduct for not using 20mm thick cement mortar 1:4 (1 cement: 4 sand) bedding in laying of floor tiles. 520 11.56 Fixing glazed/ Ceramic/Rectified/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. 521 11.57 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.05% and conforming to IS: 15622 of approved make in all colours and shades for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 522 11.58 Providing and fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: 523 11.59 Providing and laying 500x500x40mm thick Turf paver on 150mm thick sub grade of compacted bed of 20mm nominal size stone aggregate and base course with 50mm thick sand and filling joints with sand including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer- in-charge. 524 11.60 Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting mortar bedding and joints filled with acid and/ or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. 525 11.60.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 sand)Acid and alkali resistant tile. 526 11.60.2 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 sand).Acid and alkali resistant tile. 527 11.61 8 mm thick.stones Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. 11.61.1 Marble tiles (polished) Raj Nagar. 11.61.2 Granite tile of any colour /shade 528 11.62 Providing and fixing cramps of required size and shape in RCC/ CC /Stone/ Brick masonry backing with cement mortar 1:2 ( 1 cement :2 sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). 11.62.1 Gunmetal cramps. 11.62.2 Stainless steel cramps. 529 11.63 Providing and fixing expansion hold fasteners of wedge expansion type on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. 11.63.1 Fastener with threaded dia 6 mm. 11.63.2 Fastener with threaded dia 10 mm. 11.63.3 Fastener with threaded dia 12 mm. 530 11.64 Providing and fixing stone slab table rubbed on both faces edges rounded and polished of size as required and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. 11.64.1 White Agaria Marble Stone. 11.64.2 Granite Stone of approved shade. 531 11.65 Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer- in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. 11.65.1 300 mm Finished Floor Height (FFH) 11.65.2 450 mm Finished Floor Height (FFH). 532 11.66 Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. 533 11.67 Providing Epoxy flooring self leveling type on strong base in desired colour/design as approved by Engineer-in-Charge. Resin for epoxy is to be of floor grade type i/c appropriate hardner and filler material. with 5 year defect liability period (This item is to be used only for operation theaters in hospitals) 11.67.1 1 mm thick 11.67.2 2 mm thick 11.67.3 3 mm thick 534 11.68 Providing and fixing acoustic PVC (Poly Vinyl Flooring) EN (European Standard) over fiberglass mat PVC foam backing (EN 14904), total thickness is 3.25mm (EN 428/EN 427), wear layer is 0.85 mm thick (EN 429), anti-bacterial and anti-fungus surface treatment , chemical resistance test qualified (EN-423)-high resistance, thermal and underfloor heating test qualified (EN12524) - all vinyl sheets must be linked crosswise with a continuous copper strip and finally connected to earth for grounding electrostatic electrical charges. Suitable and slip resistant. Recommended to use in area like Lecturer room, Conference room, Kids area, School, colleges, Residential and all commercial official scope etc. 535 11.69 Providing and fixing 2 mm thick heterogeneous PVC (poly vinyl flooring) EN (European Standard) with wear layer is 0.55mm thick of PVC, total weight is 2300 g/m2 approx. PUR (polyurethane reinforced), residual indentation approx.0.05 mm, castor wheel test qualified, dimensional stability ≤0.10%, static electrical charge .The floor finish should termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto100mm. Recommended to use in area like Patient rooms , Doctor room Lecturer room, Kids area, School, Colleges, Residential and all commercial official scope etc. 536 11.70 Providing and fixing 8mm and above thick laminated (wooden flooring) of AC4 and above grade product of approved made out of core high density fibre board (HDF), surface layer shall be high preasure laminated treated for abrasion, scratch, moisture protection, flame protection U.V resistant, layer of acrylic resin, aluminium oxide or similer layer having above properties, backing under layer on min 2 mm thickness shall provide as sound absorbent and moisture protection layer, The seamless impregenated decorative layer of specified size, design, colour and pettern, all bonded together under high temperature and pressure with eco-friendly. The material shall be applicable warranty formaldehyde free, eco- friendly and fully recyclable (eco-freindly) and matching shed and excluding quantity of skirting and profile. 537 11.71 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, 1:6 (1 cement : 6 sand) including filling the joints with same mortar, with common burntclay non modular bricks 11.71.1 100 mm thick 11.71.2 200mm thick 538 11.72 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colour and pattern over 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturers specifications and direction of Engineer-in-Charge. 11.72.1 80 mm thick C.C. paver block of M-35 grade 11.72.2 60 mm thick C.C. paver block of M-35 grade 11.72.3 60 mm thick C.C. paver block of M-30 grade 539 11.73 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- Charge). 540 11.74 Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side(top & bottom), including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-Charge. 541 11.75 Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished machine cut Granite of approved shade, colour and texture of Granite Door frame. in cement mortar 1:3 (1 cement :3 sand) Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge. 11.75.1 Granite Door frame for 100mm thick wall Thickness. 11.75.2 Granite Door frame for 200mm thick wall Thickness. 542 11.76 Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11.76.1 Plain ivory light shade : Size 600X600mm thickness 9-10mm 11.76.2 Dark shade (terracotta) : Size 600X600mm thickness 9-10mm 543 11.77 Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 77.1 Plain ivory light shade : Size 600X600mm thickness 9-10mm 11. 77.2 Dark shade (terracotta) : Size 600X600mm thickness 9-10mm 544 11.78 Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 78.1 In light shade glossy/ rustic /stain finished 11. 78.1.1 Size 600X600 mm thickness 9-10 mm 11. 78.1.2 Size 800X800mm thickness 11-12mm 11. 78.1.3 Size 800X1200 mm thickness 11-12mm 11. 78.2 In dark shade glossy/ rustic /stain finished 11. 78.2.1 (a) Size 600X600 mm thickness 9-10 mm 11. 78.2.2 (b) Size 800X800mm thickness 11-12mm 11. 78.2.3 (c) Size 800X1200 mm thickness 11-12mm 545 11.79 Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 79.1 In light shade glossy/ rustic /stain finished 11. 79.1.1 (a) Size 600X600 mm thickness 9-10 mm 11. 79.1.2 (b) Size 800X800mm thickness 11-12mm 11. 79.1.3 (c) Size 800X1200 mm thickness 11-12mm 11. 79.2 In dark shade glossy/rustic/stain finished 11. 79.2.1 (a) Size 600X600 mm thickness 9-10 mm 11. 79.2.2 (b) Size 800X800mm thickness 11-12mm 11. 79.2.3 (c) Size 800X1200 mm thickness 11-12mm 546 11.80 Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 80.1 In light colour and shades as ivory, beige blanco, grey etc. 11. 80.1.1 (a) Size 300X300 mm thickness 9-10 mm 11. 80.1.2 (b) Size 600X600mm thickness 9-10mm 11. 80.1.3 (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) 11. 80.2 In dark colour and shade etc. 11. 80.2.1 (a) Size 300X300 mm thickness 9-10 mm 11. 80.2.2 (b) Size 600X600mm thickness 9-10mm 11. 80.2.3 (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) 547 11.81 Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting, riser laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 81.1 In light colour and shades as ivory, beige blanco, grey etc. 11. 81.1.1 (a) Size 300X300 mm thickness 9-10 mm 11. 81.1.2 (b) Size 600X600mm thickness 9-10mm 11. 81.2 In dark colour and shades etc. 11. 81.2.1 (a) Size 300X300 mm thickness 9-10 mm 11. 81.2.2 (b) Size 600X600mm thickness 9-10mm 548 11.82 Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality including grouting the joints with white cement and matching pigments etc. complete 11. 82.1 For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) 11. 82.1.1 Size 600X600 mm thickness 9-10 mm 11. 82.1.2 Size 800X800mm thickness 11-12mm 11.82.1.3 Size 800X1600 mm thickness 11-12mm 11.82.1.4 Size 1000X1000 mm thickness 11-12mm 11. 82.1.5 Size 600X1200 mm thickness 11-12mm 11. 82.1.6 Size 800X1200 mm thickness 11-12mm 11. 82.1.7 Size 1200X1200 mm thickness 11-12mm 11.82.1.8 Size 1200X1800 mm thickness 11-12mm 11.82.1.9 Size 1200X2400 mm thickness 11-12mm 11. 82.2 For wall stain / rustic finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e.within 6 hours, Size 300X600 mm thickness 9-10 mm 11. 82.3 For wall polished / Glossy finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e. within 6 hours, Size 300X600 mm thickness 9-10 mm 549 11.83 Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality / premium in skirting, riser laid our 12mm thick cement mortar 113 including grouting the joints with white cement and matching pigments etc. complete 11. 83.1 For skirting, risers etc. glossy/ rustic /stain/matt finished in all colours and shades 11. 83.1.1 Size 600X600 mm thickness 9-10 mm 11. 83.1.2 Size 800X800mm thickness 11-12mm 11. 83.1.3 Size 600X1200 mm thickness 11-12mm 11. 83.1.4 Size 800X1200 mm thickness 11-12mm 550 11.84 Granite work gang saw cut (polished machine cut) of thickness 12 mm for wall lining, skirting, risers of steps and dado (veneer work), back filling with a grout of average 12 mm thick in cement mortar 1:3 (1 Cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the beaching by means of cramps, which shall be paid for separately). 11. 84.1 Area of tiles not less 0.18 sqm 11. 84.1.1 Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter 11. 84.1.2 Course granite light Black/light Red/ off White with crystals of other colors and various patterns 11. 84.1.3 Gray/Pink/Brown with various patterns 551 11.85 Providing and laying gang saw cut 12mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cemnt mortar 1:4(1cement:4sand) including grouting the joints with white cement mixed with matching pigments, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 11. 85.1 Area of tiles not less 0.18 sqm 11. 85.1.1 Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter 11. 85.1.2 Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns 11. 85.1.3 Gray/Pink/Brown with various patterns 552 11. 86 Providing and fixing artificial synthetic green long and fine yarns grass, UV/water resistant with SBR latex backing eco-friendly durable high density 100 % PP ( Poly Poplin ) anti UV fiber.denier 12000 dtex, stich rate 18 stiches per 10cm, stich density 16800 stiches/m2, tufted weight 1830g/sqm approx. 11. 86.1 Roll size will be 25.00m X 2.00m (25mm thick)- weight 150kg- per roll. 11. 86.2 Roll size will be 25.00m X 2.00m (40mm thick)- weight 180kg- per roll. 553 11.87 Providing and fixing laminated (engineered wooden flooring) of suitable thickness 10-14 mm of suitable grade category product of approved made out of core high density fibre board (HDF) &other component it treated for abrasion ,scratch ,moisture protection, flame protection,U.V resistant. backing with eco- friendly resins specified by the manufacturer .The material shall be applicable warranty formaldehyde free, eco friendly, highly recommended for high traffic area and fully recyclable and matching shed and excluding quantity of skirting and profile. 554 11.88 Providing and fixing single layer homogeneous (solid wooden flooring) of suitable thickness 14 - 18 mm of suitable grade category product of scratch protection, moisture protection, flame protection U.V. resistant, backing under layer on min 2 mm thickness The material shall be applicable warranty formaldehyde free, eco friendly ,highly recommended for high traffic area and fully recyclable and matching shade and excluding quantity of skirting and profile. 555 11.89 Providing and fixing tuffed 1/10” loop pile (carpet tile / Carpet). EN (Euorpean Standard) size 50cm x 50cm /roll Size of total thickness 5.5 mm and above with total mass of 4100g/m2approx and with polyester fleece primary backing with standard dimensional stability with impact sound / noise reduction and recommended for high traffic acoustical area. 556 11.90 Providing and fixing spc (stone plastic composite) virgin pvc water resistant proof vinyl flooring with a thickness between 4 to 8mmuv coated layer with a wear layer of 0.3 to 0.80mm with a SPC core layer of 2.00 to 5.00 mm with a SOP of heat resistant, voc free, easy to cut, anti microbial protection in the form of tiles, planks helpful in environmental of profection health. 557 11.91 Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone tile flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with white cement mix with matching pigment etc. complete as per direction of Engineer-in-Charge. 11. 91.1 300x300mm 11. 91.2 400x400mm 11. 91.3 600x600mm 558 11.92 Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone slab flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size of area more then .50 sqm and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with cement mix matching pigment etc. complete as per direction of Engineer -in-Charge. 559 12.1 Providing corrugated G.S. Sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.1 1.00mm thick with zinc coating not less than 275gm/m² 12.1.2 0.80mm thick with zinc coating not less than 275gm/m² 12.1.3 0.63 mm thick with zinc coating not less than 275gm/m² 560 12.2 Straight cutting in G.S. sheet of any thickness roofing for making opening of area exceeding 40 sq. decimetre for chimney stacks, sky light etc. 561 12.3 Extra for circular cutting in C.G.S. sheet of any thickness roofing for making opening of area exceeding 40 square decimetre : 562 12.4 Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 12.4.1 0.80mm thick with zinc coating not less than 275gm/m² 12.4.2 0.63mm thick with zinc coating not less than 275gm/m² 563 12.5 Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350gm/m² 564 12.6 Providing and Fixing of 40 cm over all width plain, G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 sand). 1.00mm thick with zinc coating not less than 275gm/m² 565 12.7 Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 12.7.1 0.80mm thick with zinc coating not less than 275gm/m² 12.7.2 0.63mm thick with zinc coating not less than 275gm/m² 566 12.8 Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia.G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. 567 12.9 Extra for straight cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc.. 568 12.10 Extra for circular cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. 569 12.11 Extra for providing and fixing wind ties of 40x 6 mm flat iron section. 570 12.12 Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. 12.12.1 Corrugated serrated adjustable ridges 12.12.2 Plain wing adjustable ridges 12.12.3 Close fitting adjustable ridges 12.12.4 Unserrated adjustable hips 571 12.13 Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: 12.13.1 Corrugated apron pieces 12.13.2 Eaves filler pieces 12.13.3 North light curves 12.13.4 ventilator curves 12.13.5 Barge boards 12.13.6 Ridge finials 12.13.7 Special north light curves 12.13.8 S type louvers 572 12.14 Providing flat iron brackets 50x3mm size with necessary bolts, nuts washers etc. for fixing G.S. sheets gutters with purlins. 573 12.15 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS:277 in 240 mpa steel grade, 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 574 12.16 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self- tapping screws complete : 12.16.1 Ridges plain (500 - 600mm). 12.16.2 Flashings/ Aprons.( Upto 600 mm) 12.16.3 North light curves. 12.16.4 Barge board (Upto 300 mm) 12.16.5 Crimp curve 12.16.6 Gutter. (600 mm over all girth) 575 12.17 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 12.17.1 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. 12.17.2 2mm thick flat. 576 12.18 Providing and Fixing of sky lights consisting of Multi cell/tight cell Polycarbonate Panel System of approved colour, 16 mm thick (minimum) having uniform in color with an integral Tight-Cell core constructed not to exceed 4mmx4mm in a cross section, involved such as bolts nuts and screws etc. and labour for cutting bending to required profile, necessary scaffolding, hoisting in position etc. for proper completion of the work etc. complete as per specification drawings and direction of Engineer in charge. Finished surface area of roofing fixed over steel tubular structure shall be measured for payment. MS tabular frame work shall be measured separately for payment. 12.18.1 10mm thick 12.18.2 16mm thick 577 12.19 Providing sand stone slab 40 to 50 mm thick for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 sand ) complete : 12.19.1 Red sand stone slab 12.19.2 White sand stone slab : 578 12.20 Painting top of roofs with residual type petroleum bitumen of grade VG 10 of approved quality @ 17kg per 10 sqm impregnated with a coat of sand at 60 cum per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 579 12.21 Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance and thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturers specifications and as approved by engineer In charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., and washing with water all complete. The contractor shall give guarantee for the performance of SRI and also the durability of coating, all complete as per direction of Engineer-in-charge. 580 12.22 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. 581 12.23 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 sand) and finished neat complete. 582 12.24 Providing and fixing on roof pressed clay tile (Mangalore tile) 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) 583 12.25 Providing and laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness of approved pattern on steel frame work complete (steel frame work to be paid separately) 584 12.26 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase 585 12.27 Making khurras 45x45 cm (sunk area) with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete so as to receive rain water/ spillage water on roof in a sunk area and completely rain out in a near perfect strain meter motion into rain water pipe. 586 12.28 Providing and fixing M.S. holder bat clamps of approved design to C.I. Or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 12.28.1 100 mm diameter 12.28.2 150 mm diameter 587 12.29 Providing and fixing ISI marked sand cast iron rain water pipes. 12.29.1 100 mm dia minimum wall thickness 5mm 12.29.2 150 mm dia minimum wall thickness 5mm 588 12.30 Providing lead caulked joints to sand cast iron rain water pipes and fittings : 12.30.1 100 mm dia. Pipe 12.30.2 150 mm dia. Pipe 589 12.31 Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) : 12.31.1 Sand cast iron bend : 12.31.1.1 100 mm diameter 12.31.1.2 150 mm diameter 12.31.2 Sand cast iron plain shoes : 12.31.2.1 100 mm diameter 12.31.2.2 150 mm diameter 590 12.32 Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 12.32.1 75 mm diameter (minimum wall thickness 1.8mm) 12.32.2 110 mm diameter (minimum wall thickness 2.2mm) 591 12.33 Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 12.33.1 Coupler 12.33.1.1 75 mm (minimum wall thickness 1.8mm) 12.33.1.2 110 mm (minimum wall thickness 2.2mm) 12.33.2 Single push fit Coupler : 12.33.2.1 75 mm (minimum wall thickness 1.8mm) 12.33.2.2 110 mm (minimum wall thickness 2.2mm) 12.33.3 Single tee with door 12.33.3.1 75x75x75 mm (minimum wall thickness 1.8mm) 12.33.3.2 110x110x110 mm (minimum wall thickness 2.2mm) 12.33.4 Single tee without door 12.33.4.1 75x75x75 mm (minimum wall thickness 1.8mm) 12.33.4.2 110x110x110 mm (minimum wall thickness 2.2mm) 12.33.5 Bend 87.5° 12.33.5.1 75 mm bend (minimum wall thickness 1.8mm) 12.33.5.2 110 mm bend (minimum wall thickness 2.2mm) 12.33.6 Shoe (Plain) 12.33.6.1 75 mm Shoe (minimum wall thickness 1.8mm) 12.33.6.2 110 mm Shoe (minimum wall thickness 2.2mm) 592 12.34 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 12.34.1 75 mm (minimum wall thickness 1.8mm) 12.34.2 110 mm (minimum wall thickness 2.2mm) 593 12.35 Providing and fixing to the inlet mouth of rain water pipe fixing cast iron grating 15 cm diameter and weighing not less than 440 grams. 594 12.36 Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. 595 12.37 Providing and fixing 100 mm/110 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 sand) 12.37.1 Stone ware spout 12.37.2 Upvc spout (Pipe dia.110 mm) 596 12.38 Providing and fixing of self-supported mechanically seamed roofing system, made of high quality steel, having 340 MPA yield strength, pre coated galvalume sheet as per ASTM A 792 M of base metal thickness from 0.8 mm to 1.6mm (tolerance ± 0.02mm). High grade steel sheet should have 55% aluminum and 45% zinc coating by hot-dip process of minimum 25 micron The rate includes supplying, fixing, loading unloading, hire charges of all plants machineries, anchors, fasteners, washers, bolts, epoxy, paint and all wastage etc. complete. Accessories and fixtures like hangers/clamps for installation of lighting /fixtures /utility/ duct as per requirement and ventilators, skylight can also be provided at crown/ridge by making cuts into the panels which is to be paid separately. This item shall be executed only by the agency which has all required manufacturing machineries and necessary expertise. 12.38.1 Base metal thickness 0.8mm up to span 15 meter 12.38.2 Base metal thickness 0.9mm , up to span 18 meter 12.38.3 Base metal thickness 1.0 mm, up to span 21 meter 12.38.4 Base metal thickness 1.1 mm, up to span 23 meter 12.38.5 Base metal thickness 1.2mm, up to span 25meter 12.38.6 Base metal thickness 1.3 mm, up to span 27 meter 12.38.7 Base metal thickness 1.4mm, up to span 29meter 12.38.8 Base metal thickness 1.5 mm, up to span 31 meter 12.38.9 Base metal thickness 1.6 mm, up to span 33 meter 12.38.10 Providing and fixing galvalume 1.0 mm thick clamps/hangers of size 75X140mm with saddle of 50mm dia, riveted at one side and nut and bolt at other side, to self-supported roofing system by mechanical seaming to suspend light fixture/cable stay/false ceiling/duct etc., at their location which should be planned earlier by engineer-in-charge. Clamps shall be fixed during seaming of panels. 12.38.11 Providing and fixing advanced type hurricane turbo ventilator to self- supporting roof having neck dia 600mm made of aluminum having 24 nos vertical vanes made of aluminum sheet. Ventilator should be fixed on 1 to 2mm thick G.I. ring which shall be fixed on 2mm thick polycarbonate sheet. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates i/c of all material, labour fittings screw, rings, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. 12.38.12 Providing and fixing of 2mm thick polycarbonate sheet to self-supported roofing system. The sheet shall have tensile strength and elongation as per ASTM D 638, refractive index as per ASTM D 592, light transmission as per ASTM D 1003 and specific gravity as per STM D 792. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates include of all material, labour, fittings, screw, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. 597 12.39 Supply, fabrication and erection of three-dimensional space frame steel structure consisting of support node, primary space frame members, space notes nodes, bolts, sleeves (nut), purlin stool, purlin etc. to support roof sheet in plain or curved shape. (Approximate zinc coating thickness 77 Microns) and shall not be less than 400 g/sqm (Approximate zinc coating thickness 56 microns). Bolts, sleeves and cones shall be electro-galvanized to ASTM B 633 Type 2, SC3. Shop drawings along with structural design analysis shall be provided by the manufacturer for approval of the engineer in charge. Rate shall include cost of design, all material, all lifts, labour, transport, storage, machines, tools and plants, wastages, erection and installation at site all necessary scaffolding etc. necessary to provide finished product but excluding cost of erection/construction of support shaft and roof sheet. 598 12.40 Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). 599 12.41 Providing and fixing in position roof tile under lay using 12mm thick(minimum) Moisture/fire Resistance heavy duty fibre cement board(High Pressure Steam Cured) Type A,Category 4 conforming to IS 14862:2000, fixed on Steel frame work of 610mmx610mm or 610mmx1220mm grid by counter sunk stainless screw @ 300mm C/C all complete as per the drawings. Tiles etc may be laid on the board substrate by sealing the joints properly with filler material or sealant to ensure no leakage through joints. All complete as per drawings, specification and as per direction of Engineer-in-Charge.Note - MS Section structure and roof tile like Shingles/Mangalorian Tiles etc cost will be paid seprately. 600 12.42 Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. 601 12.43 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8183, density 16kg/m3, 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. 602 12.44 Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge : 603 12.44.1 With Type N - Normal 50 mm thick 604 12.44.2 With Type SE - Self Extinguishing type 50 mm thick. 605 12.45 Providing and laying thermal insulation of roofing with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 mx2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge. 606 12.46 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in- Charge. 607 12.47 Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. 608 12.48 Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceiling and held in position by criss- crossing GI wire. 609 12.49 Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by criss cossing GI wire etc.complete as per directions of Engineer-in-Charge. 610 12.50 Supply and application of 48kg/m3 density & 50 mm thick with a tolerance of -2 + 6mm of Rockwool RB slabs unfaced (Binder<3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non- combustible when tested as per BS 476 Part 4 or A1 when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 611 12.51 Supply & Application of Rockwool RB slab 48kg density, 50mm thick wrapped in 200G vergine polythene bags for partition, ceiling (Under Deck insulation) conforming to IS: 8183 with tolerance of -2 +6mm of rock wool RB slabs unfaced (Binder <3.5%) conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested per EN 13501. . Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 612 12.52 Supply & Application of Rockwool RB 2 slab 64kg /m3, 50mm thick, with GI wire netting 24 SWG; fixing for NRC Value 1.00 for Acoustics, thermal & fire purpose conforming to and IS: 8133, IS: 8183 with tolerance of -2 + 6mm of RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Two random samples from each supplied batch will be tested for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 613 12.53 Supply & Application of Rockwool building roll (1.1mx10m) 48kg density, 50mm thick with FSK (foil scrim Kraft) aluminium foil facing for HVAC duct & building underdeck purpose conforming to IS: 8183, IS: 8183 and IS:8183 a tolerance of -2 +6 mm of Rockwool RB slabs unfaced (Binder < 3.5%) ; conforming to IS: 8183; /ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS: 476 Part 4 or Al when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and it shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 614 12.54 Supply & Application of Rockwool Building Roll (1.1mX10m) 48kg density, 50mm thick with ALG (Alu & glass) mixture of Aluminium & glass facing for building underdeck application below metal sheet also conforming IS: 8183, IS: 8183 and IS: 8183 a tolerance of -2+6mm of rockwool RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested as per EN 13501. The maximum service temperature shall be 700°C. Shot content should be less than 2% for 500 microns & less than 10% for 250 microns when tested as per standard IS: 3144. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 615 12.55 Providing and fixing of minimum 12mm thick, 5 layered bubble Reflective thermal insulation made of 12 microns aluminum foil with minimum 97% Reflectivity on both outer sides, under both aluminum foil 4mm thick FR bubble insulation with Low Emissivity - 0.032 (ASTM1371), Fire Class A (ASTM E84) All five layers of insulation shall be stick with each other by registered manufacturer using hot process without using any kind of adhesive. Insulation shall be supplied in 1.10m wide roll width with 50mm wide factory-made cuts at both sides to joint another roll by using general stapler in case of new shed and adhesive in case of existing or self-supported roof. 12.55.1 Fixing of insulation on new work by laying horizontally on the purlins and perpendicular to the direction of purlins and fixing by using self- tapping screws at equal distance. Place and align the second roll of insulation parallel to the first roll and overlaps the adjacent rolls. After Insulation is fixed over the purlins the metal sheet is placed over insulation and drilled with self-tapping screws with purlins etc. complete, including all material and scaffolding. 12.55.2 Installation of insulation in Old Sheds where the sheets have been already fixed over the purlins so insulation shall be fixed under the purlins covering the roof bottom. Insulation roll to be unfolded at the bottom of the purlin horizontally and parallel to the roof and fixed by using the self- tapping screw with a washer at equal distance etc. Complete, including all material and scaffolding. 12.55.3 Insulation of Self-Supported Roof shall be applied under the roofing by using stud welding to the self- supported roof at a distance not be more than 300 mm in both directions. At each stud insulation roll shall be pushed against the studs so that it gets punctured and then non-returning washer has to be applied at the stud etc. complete, including all material and scaffolding. 616 12.56 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over- deck on ceiling surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM C 518, compressive strength of > 350 kPa listed as per ASTM C 1621, density of 34-36 kg/m³ as per ASTM D 1622, water absorption < 1% by volume as per ASTM C 272, oxygen index of minimum 24 as per ASTM D 2863 and Fire retardant property as per DIN 4102, with preferred stone or pre-cast tiles shall be laid over the XPS board with suitable grouting including providing pre-fabricated EPDM drain outlets (Cement Screed casting shall be done at the junction of roof and parapet walls), all as per the directions of Engineer-in-charge. 617 12.57 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size underdeck on ceiling surface, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. 618 12.58 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.58.1 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board 12.58.1.1 Flat surfaces 12.58.1.2 Curved surfaces 12.58.1.3 Sunk or raised mouldings 12.58.1.4 Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. 12.58.2 12.5 mm thick tapered edge gypsum board 12.58.2.1 Plain board conforming to IS: 2095- Part I : 2011 (Board with BIS certification marks). 12.58.2.2 Fire resistant Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) 12.58.2.3 Gypsum moisture resistant board. 12.58.2.4 Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturers specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. 12.58.3 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. 619 12.59 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of mainT runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.59.1 GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 12.59.2 GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 12.59.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a ompletely sealed unit. 12.59.4 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. 12.59.5 Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty. 12.59.6 8mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primedcolour tiles of size 595X595 mm. 12.59.7 6mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primed colour tiles of size 595X595 mm. 620 12.60 Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to centre, suspending the main C carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in/swing down tiles into spring T with 12.60.1 GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 12.60.2 GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. 621 12.61 Providing & Fixing of Unperforated Antibacterial Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width and height of 32mm. The Tile will be manufactured on advanced equipment that includes several levelling stages in the manufacturing process by approved certified manufacturers. The Tile shall be clipped into clip in rail of 0.5mm thick G.I. in form of a grid system using a cross connector. The clip in rail shall be supported from slab by means of rigid Suspension of 4mm G.I.Road, Hold on Clamp with Clip. (Rate include all materials and labour). 622 12.62 Providing and fixing board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): 12.62.1 12mm thick insulating board 12.62.1.1 Natural colour insulating board 12.62.1.2 White face insulating board 12.62.1.3 Flame retardant face insulating board 12.62.2 Flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 12 mm thick marked in ceiling with necessary nails etc. complete 12.62.3 6 mm thick plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete 12.62.4 6mm thick High Pressure Steam Cured non asbestos, reinforced with cellulose fibres,Moistur& fire Resistance heavy duty fibre cement board, Type A,Category 4 conforming to IS 14862:2000.(for wet areas) 12.62.5 4 mm thick High Pressure Steam Cured non asbestos, pre-painted, self- embossed, designer cement boardType B, Category 3 conforming to IS 14862:2000 . of approved texture,design patterns 623 12.63 Extra for Circular cutting and wastages in ceiling with: board only (frame work) Natural colour insulating 12 mm thick board paid separately. 624 12.64 Extra for providing and fixing ceiling to curved surfaces in narrow widths 625 12.65 Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides and edges including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). 626 12.66 Providing and Fixing colour coated profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material. The sheet shall be fixed using self- drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape 627 12.67 Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plain or design particle board ceiling tiles. 628 12.68 Providing and fixing expanded polystyrene (thermacol) false ceiling (frame work to be paid separately) : 12.68.1 With Type N - Normal 50 mm thick 12.68.2 With Type SE - Self Extinguishing type 50 mm thick 629 12.69 Providing and fixing false ceiling with fabric fixing with nail etc. (frame work and beading to be paid separately). 12.69.1 costing upto 70/- per metre, 12.69.2 Rs 70- 150 per meter 12.69.3 Upto 200 per meter 630 12.70 Providing and fixing perforated Aluminium panel ceiling of white/ natural satin colour supplied by approved manufacturers consisting of panel of standard size with bevel edge, panel length up to 6 m, coil Coated on a Continuous Paint Line suitable for Interior application, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al. Mg) for higher strength and good roll forming characteristics. Panel carrier shall be suspended by means of G.I. threaded rod having 6 mm diameter at a distance of 1.5 mtr. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. 12.70.1 With panels of size 300mm wide X30mm deep X 0.7mm thick and panel carrier of size 40.5mm wide X 62mm deep X 0.9mm thick 12.70.2 With panels of size 150mm wide X 15.5 mm deep X 0.5mm thick and panel carrier of size 32mm wide X 39mm deep X 0.95mm thick 12.70.3 With panels of size 84mm wideX16mm deep X 0.5mm thick and panel carrier of size 62mm wide X 29mm deep X 0.95mm thick 631 12.71 Providing and fixing un-perforated Aluminium Panel ceiling Supplied by approved manufacturers of standard white/ natural satin shade consisting of panel 30 mm/80mm/130mm/180mm wide X 15 mm deep X 0.5mm /0.6mm thick respectively, with square edges having panel length up to 6 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 5050 (Al.Mg) for higher strength and good roll forming characteristics. The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a Galvanised suspension spring clip at a distance of 1.7mtrs centre to centre. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. 632 12.72 Providing and fixing U Baffle Aluminium panel ceiling of different colors and finish supplied by approved manufacturers, consisting of panel size 50 mm width X 100 mm deep using 0.6 mm thick, panel length upto 4 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 3005 (Al. Mg) for higher strength and good roll forming characteristics. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The measurements shall be wall to wall without any deductions for lights, diffuses, columns etc. As an option, ceiling area above U Baffle can be painted by the contractor in black colour or any other colour as per the architect for better aesthetics before fixing this system. 12.72.1 Standard White / Natural Satin Shade 12.72.2 Wooden Finish 633 12.73 Supply & Fixing of perforated G.I false ceiling tile or plank using torsion spring fixing system supplied by approved manufacturer comprising of tile of 600 mm wide and 600 mm long manufactured out of 0.5 mm thick or plank of 600mm wide and 1200 mm long manufactured out of 0.6mm thick galvanised steel perforated with 2 mm dia. at a distance of 5mm centre to centre. Non-woven felt made of glass- reinforced fibre glued over the perforation at the back side of panels to provide noise reduction co efficient up to 0.7 NRc. “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on centre spacing to match panel length. Cross runners 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced at a spacing of 600 mm on centre maximum. The measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. 12.73.1 Tile of 600 mm wide ,600 mm long and 0.5 mm thick 12.73.2 Plank of 600mm wide ,1200 mm long and 0.6mm thick 634 12.74 Providing and fixing of composite perforated Gypsum board with Glass wool Fiber panel of Size 595x595x25 mm with 10mm square Perforation tiles false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “ “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. 635 12.75 Providing and fixing of Composite perforated MDF board with Glass wool Fiber panel of Size 595x595x18 mm 10mm Square Perforation tiles (Square /Tegular Edge) false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. 636 12.76 Providing and fixing of Perforated Gypsum board with Acoustical Glass Fiber Tissue faced panel of Size 595x595x12.5mm, Square 10mm Perforation tiles (Square Edge) false ceiling panels in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. 637 12.77 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance≥ 85%, Thermal Conductivity k = 0.052 -0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking TGrid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling usinggalvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) 638 12.78 Providing and fixing false ceiling at all heights with 15 mm thick integral densified micro look edged non- cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.80 grams per sqm) i.e. 50 mm long, 12 mm outer diameter M-6 dash fasteners with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 639 12.79 Providing and fixing false ceiling at all heights with 15 mm thick integral densified mirolook edge with BIO SAFE coating as per ISO 7251:2005, ISO 20743:2007 and ISO 21527-1:2008, making the tiles resistant to bacterial growth in case of any external bacterial contact made onto the surface of tiles, non-cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 640 12.80 Providing and fixing in position wall panelling at all heights with 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles., non-cementitious, reinforced with fibre and natural filler, having NRC (Noise Reduction Coefficient) of 0.10-0.20 for plain and designer 0.15-0.40 for pinhole texture and NRC 0.45-0.65 for fully perforated tiles as per IS 8225:1987, sound attenuation STA-32db. of 0.75 (minimum) as per IS 8225:1987, Light Reflectance of 85% (minimum), non-combustible as per BS:476 (part-4), 50-52% recycled content including fly ash, The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fibre joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturers specification as per direction of engineer-in-charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles. 641 12.81 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 12.81.1 With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. 12.81.2 With fully perforated 10mm thick square edged GRG false ceiling tiles for sound proof and acoustic. 642 12.82 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped 387alvanized steel sections (387alvanized387 @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cros‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer- in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 643 12.83 Providing and fixing upvc plank, Plank size (340 X 2700 ) mm as per approved shade, the panel shall be laser catted end of plank fixing j-trim fixed and corner edge of ceiling fixed u pvc clip same colour and providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 125 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular,j trim end clip includes in this item any other item not be paid sepratly complete in all respect as per the directions of Engineer-in-Charge. . 644 12.84 Providing & Fixing PVC ceiling system profile panel with click system interlock panel size 4000mmx340mmx1mm resistance to weather perfect finish in wood grain & solid colour maintenance free Resistance to weather truly anti bacterial. with edge profile J-trim on periphery & center profile T-trim in panel joint Complete System to be fixed on G.I. framework of ceiling section at 450 mm distance with enter section suspended by roof by G.I. angle hanger in proper line & level etc complete . PRODUCT SPECIFICATIONS: Meets or exceeds the standard specification of (ASTM D-4477) and its referenced documents. observed. (Tested at 50 LBS) Tensile strength, MPa: >37.0 Tensile modulus, MPa: >2000 Surface distortion: None at 120F Squareness: <1/8” of square Length: Within ¼” of specification Lock control: Complies Color Change: <2 grayscales (16 hrs under 1200W/m2 UV radiation at 50 degrees) 645 12.85 Design built, supply and erection of Tensile (fabric) structure system including designing and fabrication in M.S. steel tubular structure as per Indian standard section as per approved design and shape including base plate, dash fastener, clits etc. Cutting, patterning, plotting and wielding of fabric with the help of tensile structure software. Fabric should be wielded by high frequency PVC wielding in proper line with PVC cader to be fixed on end of the fabric and to be stretched & fixed on M.S. design structure with the help of. M.S. Flat bar with self-taping screw. M.S. structure to be painted with one coat of epoxy primer with MRF PUpaint of approved colour in desired shape. With 1050 GSM tensile fabric 12.85.1 With precontraint tensile membrane 1050 GSM (20 years Warranty) 12.85.2 With precontraint tensile membrane 1050 GSM (15 Years warranty) 646 13.1 12 mm cement plaster of mix : 13.1.1 1:4 (1 cement : 4 sand) 13.1.2 1:6 (1 cement : 6 sand) 647 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix 13.2.1 1:4 (1 cement : 4 sand) 13.2.2 1:6 (1 cement : 6 sand) 648 13.3 20 mm cement plaster of mix : 13.3.1 1:4 (1 cement : 4 sand) 13.3.2 1:6 (1 cement : 6 sand) 649 13.4 12 mm cement plaster finished with a floating coat of neat cement of mix : 13.4.1 1:3 (1 cement : 3 sand) 13.4.2 1:4 (1 cement : 4 sand) 650 13.5 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 13.5.1 1:3 (1 cement : 3 sand) 13.5.2 1:4 (1 cement : 4 sand) 651 13.6 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) finished with a top layer 6mm thick cement plaster 1:4 (1 cement : 4 sand). 652 13.7 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 sand) finished rough with sponge. 653 13.8 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 654 13.9 6 mm cement plaster 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. 655 13.10 Neat cement punning 656 13.11 Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Finished with ordinary cement. 657 13.12 Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. 658 13.13 Providing sand faced plaster upto 10meter hight above ground level concrete or brick masonry surfaces in two coats, base coat of 13 mm thick in cement mortar 1:4 (1 cement: 4 sand), clearing the surface by combing it and finishing coat of 8 mm. thick in cement mortar 1:3 (1 cement: 3 sand) and taking out surface grains by mechanical arrangement or applying second coat by mechanical means including cost of all material, labour, and T and P including all lead, lift and scaffolding etc. complete. 659 13.14 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 660 13.15 Extra for plastering 13.15.1 Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof 13.15.2 Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof 661 13.16 Extra for plastering on circular work not exceeding 6 m in radius: 13.16.1 In one coat 13.16.2 In two coats 662 13.17 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: 13.17.1 In one coat 13.17.2 In two coats 663 13.18 Extra for plastering Spherical, Groined ceiling, Flewing soffits. 13.18.1 Spherical ceiling 13.18.2 Groined ceiling 13.18.3 Flewing soffits 664 13.19 Washed stone grit plaster on exterior walls of height upto 10 M. above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings,complete as per specification and direction of Engineer- in- charge (Payment for providing grooves shall be made separately). 665 13.20 Forming groove of uniform size 20 or 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 666 13.21 Extra for washed grit plaster on exterior/interior walls of height more than 10m from ground/floor level for every additional height of 3 m or part thereof. 667 13.22 Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). 668 13.23 Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. 669 13.24 Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. 670 13.25 Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part -1 and II) 1976, applied on hacked/ uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations,excluding in wall which may come in contact with dampness finished in smooth line and level etc. complete. 671 13.26 Extra for addition of synthetic Polyester triangular fibre of length 6mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125gms. Of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. 672 13.27 Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete 673 13.27.1 G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height. 13.27.2 Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height. 674 13.28 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 sand) : 13.28.1 Flush Band 13.28.2 Sunk Band 13.28.3 Raised Band 13.28.4 Moulded Band 675 13.29 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 sand): 13. 29.1 Flush Band 13. 29.2 Sunk Band 13. 29.3 Raised Band 13. 29.4 Moulded Band 676 13.30 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 sand) top layer 6mm thick with cement mortar 1:4(1 cement : 4 sand). 677 13.31 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 sand) : 13.31.1 Flush / Ruled/ Struck or weathered pointing. 13.31.2 Raised and cut pointing 13.31.3 Sunk pointing 678 13.32 Pointing on stone work with cement mortar 1:3 (1 cement: 3 sand). 13.32.1 Flush/ Ruled pointing 13.32.2 Raised and cut pointing 679 13.33 Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust) 680 13.34 Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 sand): Flush/ Ruled pointing 681 13.35 Extra for pointing on walls on the outside/inside at height more than 10 metre from ground/floor level for every additional height of 3 m or part there of. 682 13.36 Providing and fixing broken glass in cement mortar 1.3 including cost of mortar, over compound walls. 683 13.37 Providing and fixing writing board green writing with chalk (regular modified polyster coated steel surface). of sizes. 13.37.1 size 1200mmx1800mm 13.37.2 size 1200mmx2400mm 13.37.3 size 1200mmx3000mm 684 13.38 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 685 13.39 Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. 686 13.40 Extra for lining out plaster to imitate stone or concrete blocks walling. 687 13.41 Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. 688 13.42 Providing and applying special putty in two coats based materials varnish, Belgium chalk, turpentine oil, white paint, safeda including sand papering for making the surface smooth for applying any or vinyl paints including all cost of material and labouretc complete. 689 13.43 White washing with lime to give an even shade: New work (three or more coats) 690 13.44 Colour washing such as green, blue or buff to give an even shade: New work (two or more coats) with a base coat of white washing with lime. 691 13.45 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 grams/ltr of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coat on new work. 692 13.46 Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work 693 13.47 Distempering by any mechanical or manual means with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.47.1 One coat. 13.47.2 Two coats. 694 13.48 Wall painting by any mechanical or manual means with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.48.1 One coat. 13.48.2 Two coats. 695 13.49 Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. 696 13.50 Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm). 697 13.51 Finishing walls by only mechanical or manual means with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. 698 13.52 Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface 699 13.53 Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) 700 13.54 Finishing walls by any mechanical or manual means with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.54.1 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture 13.54.2 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture. 13.54.3 Two or more coats applied on walls @ 1.25 ltr/10 sqm. Over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. 701 13.55 Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: 13.55.1 One coat 13.55.2 Two coats 702 13.56 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. 13.56.1 On steel work 13.56.2 On concrete work 703 13.57 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. 704 13.58 Applying a coat of mordant solution on G.S. sheet : 13.58.1 With a solution of 38 gms of copper acetate in a litre of soft water 13.58.2 With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. 705 13.59 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture over and including a priming of ready mixed zinc chromate yellow primer on new work : 13.59.1 75 mm diameter pipes 13.59.2 100 mm diameter pipes 13.59.3 150 mm diameter pipes 706 13.60 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 13.60.1 75 mm diameter pipes 13.60.2 100 mm diameter pipes 13.60.3 150 mm diameter pipes 707 13.61 Painting with oil type wood preservative of approved brand and manufacture: New work (two or more coats) 708 13.62 Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. 709 13.63 Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. 710 13.64 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 711 13.65 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 712 13.66 Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 13.66.1 One coat. 13.66.2 Two coats. 713 13.67 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. 13.67.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. 13.67.2 With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. 13.67.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. 714 13.68 Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. 715 13.69 Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. 716 13.70 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 717 13.71 Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work 718 13.72 Varnishing with varnish of approved brand and manufacture: 13.72.1 Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. 13.72.2 Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. 719 13.73 French spirit polishing: Two or more coats on new works including a coat of wood filler. 720 13.74 Polishing on wood work with ready mixed wax polish of approved brand and manufacture: New work. 721 13.75 Lacqer polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying lacqer polish with air compressor. Two or more coats on new works including a coat of wood filler. 722 13.76 Mealamine polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler. 723 13.77 Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. 724 13.78 Lettering with black Japan paint of approved brand and manufacture. 725 13.79 Providing and applying flakes textured homogeneous wall finishing system consisting of a two component system of dry flakes (9.5kgs per/pack) made of a special grade of heat treated China clay with rigid homopolymer coated with fade resistant pigments and a 100% acrylic polymer Bonding agent (5kgs/pack) applied thickness of the coating being between 0.8-1.2mm, to be applied in single coat, on a cured, smooth level plaster surface without keying, as per the shades/ combinations approved, as per manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per direction/ supervision of the engineers-in-charge inclusive of one coat of primer on the base at all heights etc all complete. 726 13.80 Providing and applying Granules homogeneous wall finishing system consisting of a two component system of dry granules (25 kgs/pack) made of 92% silica particles coated with fade resistant pigments and a 100% acrylic Polymer Bonding agent (5 kgs/pack) with the applied thickness of coating as required to be applied in single coat, on a cured. Smooth level plaster surface without keying as per the shades/combinations approved. As per the manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per the directions/supervision of engineers in charge, all complete inclusive of primer on the base. 13.80.1 0.8-1.2mm thickness 13.80.2 2.0-2.5mm thickness 727 13.81 Providing and Applying Roto Wall finishing system being a dispersion of inorganic fillers, calcite, pure silica, quartz and broad spectrum fungicides stabilized by an acrylic co-polymer, to be applied by means of customized trowels (one for incorporating material on base and spreading and other for finishing) in single coat with a coating thickness of 2.0-2-2.5mm on a cured smooth level plaster without keying, by the approved applicator of manufacturer, of the approved shade as per directions for usage all inclusive including primer coat on the base. 728 13.82 Providing and plastering over AAC masonary wall with polymer modified cement based readymix factory controlled mortar with self curing, eco- friendly, wet premix in a mechanical mixer in thickness as specified below, and covering area of 2.04 kg per sqm/mm thickness. The Bulk density of ready mix plaster may vary from 1300 to 1600 Kg/cum, Water powder ratio (as per manufacture’s direction) may vary from 18-22 % by weight or as specified by the manufacturer and compressive strength may vary from 8-9 Mpa. 13.82.1 6 mm thick plaster for internal walls 13.82.2 8 mm thick plaster for external walls exposed to weather. 729 13.83 Providing and fixing including Designing and UV printing on aluminium composite material (ACM) sheet in different sizes with 720DPI (Dot per inch) 13.83.1 ACP sheet 2mm thick 13.83.2 ACP sheet 3mm thick 13.83.3 ACP sheet 4mm thick 730 13.84 Providing and fixing including designing and UV printing on pvc foam sheet of different size with 720 DPI (Dot per inch) 13.84.1 PVC foam sheet 3.0 mm thick 13.84.2 PVC foam sheet 5.0 mm thick 13.84.3 PVC foam sheet 8.0 mm thick 731 13.85 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. 732 13.86 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over outer wall surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM and Fire retardant property as per DIN 4102, Part 1. XPS insulation of thickness 50mm shall be placed over brushed, algae free and levelled external wall by connecting the ship-laps joints and fixed by the washer and Self-Tapping Screw of suitable length at each corner and at distance 75mm from the edge and bitumen shall be applied over the joints and G.I. Expanded Mesh (Barfi Jali) shall be fixed over XPS board by a Self- Tapping Screw of suitable length at the centre of the board and 15mm PCC shall be applied over the board (paint of suitable choice can be used), all as per the directions of Engineer-in-Charge. 733 13.87 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compressive strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D 1622, water absorption < 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. 734 13.88 Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) 735 13.89 Scrapping/sand papering of existing surface with the help of mechanized sanding machine (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) as per direction of Engineer-in- Charge. 736 13.90 Providing and applying 1 coat of Triple booster primer-resist dampness, efflorescence, alkali & at the same time improve top coat coverage by 15-20% @1.0 lt/ 10 sqm, which confirms certfication of IS 109/1968. It can be applied by Brush/ Spray Machine and the work shall be carried out as per secification& the direction of the Engineer-in-Charge. 737 13.91 Finishing walls with water based anti- germ paint of with VOC < 50 g/l, that kills disease causing germs, teflon based washability and Anti fungal properties in two or more coats @ 1.08 ltr / 10 sqm over priming coat of interior primer applied @ 1.08 ltr / 10 sqm of required shade including removing of all dust complete as per direction of Engineer- in-Charge and submission of challans of materials on enquiry. 738 13.92 Providing and applying in two coats of 250 micron thick each layer of epoxy coating on prepared surface (cost includes preparing the plastered surface smooth ready to receive epoxy coating) for operation theater walls in desired colour as per direction of Engineer-in-Charge. 739 14.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand). 740 14.2 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : 14.2.1 Door chowkhats 14.2.2 Window chowkhats 14.2.3 Clerestory window chowkhats 741 14.3 Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats) including cost of dash fasteners/ chemical fastener. 742 14.4 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish as directed by Engineer- in-charge. For door/ window/ clerestory window. 743 14.5 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 14.5.1 Float glass panes of thickness 4 mm 14.5.2 Float glass panes of thickness 5.5 mm 744 14.6 Renewing glass panes with now wooden fillets wherever necessary: 14.6.1 Float glass panes of thickness 4 mm 14.6.2 Float glass panes of thickness 5.5 mm 745 14.7 Renewing glass panes and refixing existing wooden fillets: 14.7.1 Float glass panes of thickness 4 mm 14.7.2 Float glass panes of thickness 5.5 mm 746 14.8 Supplying and fixing new wooden fillets wherever necessary: 14.8.1 2nd class teak wood fillets 14.8.2 Haldu/Bija/Kail wood fillets. 747 14.9 Renewal of old putty of glass panes (length). 748 14.10 Refixing old glass panes with putty and nails. 749 14.11 Fixing old glass panes with wooden fillets (excluding cost of fillets). 750 14.12 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 751 14.13 Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead : 14.13.1 Red/ white sand stone slabs 30 to 50 mm thick. 752 14.14 Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : 14.14.1 Sal wood battens. 753 14.15 Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : 14.15.1 Not exceeding 4.00 metres in length. 14.15.1.1 Sal wood beams 14.15.1.2 Haldu/Bija/Kail wood fillets. 14.15.2 Above 4.00 metres and upto 5.00 metres length. 14.15.2.1 Sal wood beams 14.15.2.2 Haldu/Bija/Kail wood fillets. 754 14.16 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. 755 14.17 Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. 756 14.18 Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand and manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. 757 14.19 Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. 758 14.20 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. 14.20.1 Wheel 50 mm dia. and below. 14.20.2 Wheel above 50 mm dia. 759 14.21 Providing and fixing 25 mm thick shutters for cupboard etc. : 14.21.1 Panelled or panelled and glazed shutters : 14.21.1.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 14.21.1.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 14.21.2 Glazed shutters : 14.21.2.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 14.21.2.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 760 14.22 Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35mm apart (frames to be paid separately) including fixing 50x12mm beading complete with: 14.22.1 Second class teak wood. 14.22.2 Hard wood, finger jointed 761 14.23 Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 14.23.1 20 mm diameter. 14.23.2 25 mm diameter. 762 14.24 Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. 763 14.25 Providing joists (karries) including hoisting fixing in position and applying wood preservative on unexposed surface etc. complete with: 14.25.1 Sal wood. 14.25.2 Haldu/Bija/Kail wood. 764 14.26 White washing with lime old work to give an even shade : 14.26.1 two or more coats 14.26.2 one or more coats 765 14.27 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 766 14.28 Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. 767 14.29 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (one or more coats). 768 14.30 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 769 14.31 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Old work (one or more coats). 770 14.32 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 14.32.1 75 mm diameter pipes 14.32.2 100 mm diameter pipes 14.32.3 150 mm diameter pipes 771 14.33 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved brand and manufacture on old work : 14.33.1 75 mm diameter pipes 14.33.2 100 mm diameter pipes 14.33.3 150 mm diameter pipes 772 14.34 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 14.34.1 75 mm diameter pipes 14.34.2 100 mm diameter pipes 14.34.3 150 mm diameter pipes 773 14.35 Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) 774 14.36 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. 775 14.37 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. 776 14.38 Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. 777 14.39 Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. 778 14.40 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: One or more coats on old work. 779 14.41 French spirit polishing: One or more coats on old work. 780 14.42 Mealamine polishing on wood work by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying Mealamine polish with air compressor. One or more coats on old work. 781 14.43 Lacquer polishing on wood work by preparing the surface applying putty base course. prepare the surface smooth by sand papering and then applying Lacquer polish with air compressor 14.43.1 One or more coats on old work. 782 14.44 Polishing on wood work with readymade wax polish of approved brand and manufacture : 14.44.1 Old work 783 14.45 Re-lettering with black Japan paint of approved brand and manufacture. 784 14.46 Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. 785 14.47 Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin : 14.47.1 32 mm dia 14.47.2 40 mm dia 786 14.48 Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. As per manufacturers specification. One or more coats on old work. 787 14.49 Finishing walls with water proofing cement paint of required shade : 14.49.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. 14.49.2 Old work (one or more coats @ 2.20 kg/10 sqm) complete. 788 14.50 Finishing walls with textured exterior paint of required shade : 14.50.1 Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. 14.50.2 Old work (One or more coats) applied @ 1.82 ltr/10 sqm. 789 14.51 Finishing walls with Acrylic Smooth exterior paint of required shade : 14.51.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). 14.51.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm). 790 14.52 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 14.52.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. 14.52.2 Old work (one or more coats applied @ 0.83 ltr/10 sqm). 791 14.53 Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 14.53.1 One or more coats applied on walls @ 0.85 ltr/10 sqm. 14.53.2 Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied @0.70 ltr/10 sqm 14.53.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @0.70 ltr/10 sqm. 792 14.54 Varnishing with varnish of approved brand and manufacture: 14.54.1 One or more coats with copal varnish. 14.54.2 One or more coats with spar varnish. 793 14.55 Melamine polishing on wood work (one or more coat). Old work 794 14.56 Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. 795 14.57 Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coat on old work. 796 14.58 40 mm thick stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone / White sand stone) stone to be supplied by the department. 14.58.1 Rough chiseled dressed stone 14.58.2 Fine dressed stone 797 14.59 Coursed rubble masonry (second sort) with hard stone in Cement mortar 1:6 (1 cement : 6 sand) (Stone shall be supplied by the department) 798 14.60 Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of sand, filling the joints with sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). 799 14.61 Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand) including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in- charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). 800 14.62 Colour washing with lime to give an even shade: 14.62.1 (one or more coats) 14.62.2 (two or more coats) 801 14.63 Conducting adequate nos. of scanning to detect the steel reinforcement in existing RCC elements by using ground/ Wall penetrating radar system to avoid the cutting of Main bars during drilling for inserting bolts etc. complete. 802 14.64 Chipping, Removing, Carefully loose plaster and Concrete work by low impact Hammer, Breaker without damaging the structure as Instructed by Engineer-in-Charge. 803 14.70 Rebaring of TMT bars by drilling hole & embedding bars of different diameter using epoxy grouting compound including all tools and tackles complete. 14.70.1 8 mm dia bar 10 mm dia hole 14.70.2 10 mm dia bar 12 mm dia hole 14.70.3 12 mm dia bar 16 mm dia hole 14.70.4 16 mm dia bar 20 mm dia hole 14.70.5 20 mm dia bar 25 mm dia hole 14.70.6 25 mm dia bar 32 mm dia hole 14.70.7 32 mm dia bar 40 mm dia hole 804 14.71 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 14.71.1 125x70x4 mm (ordinary type) 14.71.2 100x70x4 mm (ordinary type) 14.71.3 75x65x4 mm (heavy type) 14.71.4 75x40x2.5 mm (ordinary type) 14.71.5 50x40x2.5 mm (ordinary type) 805 14.72 Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. 806 14.73 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. 807 14.74 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of f tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 808 14.75 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer- incharge. 809 14.77 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 14.77.1 Bars upto 12 mm diameter 14.77.2 Bars above 12 mm diameter 810 14.78 Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. 14.78.1 Upto and including 12mm dia 811 14.83 Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) 14.83.1 Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work 14.83.2 Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. 14.83.3 Epoxy injection grout in concrete/RCC work of approved make 812 14.85 Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. 813 14.88 Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of L shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-incharge. 814 15.1 Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-Charge. 815 15.2 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). 816 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. 817 15.4 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. work (Payment shall be made on the cross sectional area of R.C.C. work) as per direction of Engineer-in- Charge. 818 15.5 Extra for scrapping, cleaning and straightening reinforcement from R.C.C. work. 819 15.6 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. 820 15.6.1 In lime mortar with old mughal bricks. 15.6.2 In lime mortar. 15.6.3 In cement mortar. 821 15.7 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : 15.7.1 From brick work in lime mortar. 15.7.2 From brick work in cement mortar. 822 15.8 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge: 15.8.1 In lime mortar. 15.8.2 In cement mortar. 823 15.9 Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge: 15.9.1 In lime mortar. 15.9.2 In cement mortar. 824 15.10 Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) : 15.10.1 In lime mortar. 15.10.2 In cement mortar. 825 15.11 Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. 15.11.1 For thickness of tiles 10 mm to 25 mm. 15.11.2 For thickness of tiles above 25 mm and upto 40 mm. 826 15.12 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 827 15.13 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 828 15.14 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.14.1 Of area 3 sq. metres and below. 15.14.2 Of area beyond 3 sq. metres. 829 15.15 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: 15.15.1 Of area 3 sq. metres and below. 15.15.2 Of area beyond 3 sq. metres. 830 15.16 Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: 15.16.1 Of sectional area below 40 square centimetres. 15.16.2 Of sectional area 40 square centimetres and above. 831 15.17 Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres : 15.17.1 Of sectional area below 40 square centimetres. 15.17.2 Of sectional area 40 square centimetres and above. 832 15.18 Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres : 15.18.2 Of sectional area below 40 square centimetres. 15.18.1 Of sectional area 40 square centimetres and above. 833 15.19 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: 15.19.1 R.S. Joists 15.19.2 Channels, angles, tees and flats 834 15.20 Dismantling steel work in built up sections with span upto 10 meter and hieght 5 meter in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. 835 15.21 Dismantling steel work manually/ by mechanical means in built up sections with span upto 10 meter and hieght 5 meter without dismembering and stacking within 50 metres lead as per direction of Engineer-in-Charge. 836 15.22 Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metres 837 15.23 Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. 838 15.24 Extra for marking of structural steel work required to be re- erected. 839 15.25 Removal of old Tarfelt i/c disposal as directed by Engineer in charge. 840 15.26 Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 841 15.27 Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: 15.27.1 G.S. Sheet 15.27.2 Asbestos/ Non asbestors sheet 842 15.28 Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 843 15.29 Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 844 15.30 Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. 845 15.31 Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of : 15.31.1 T’ or ‘L’ iron or pipe 15.31.2 R.C.C. 846 15.32 Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the same within 50 metres lead. 847 15.33 Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. 848 15.34 Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead. 849 15.35 Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. 850 15.36 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : 15.36.1 Upto 10 mm thick 15.36.2 Thickness above 10 mm upto 25 mm 15.36.3 Thickness above 25 mm upto 40 mm 851 15.37 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: 15.37.1 Thickness upto 40 mm 15.37.2 Thickness above 40 mm upto 75 mm 852 15.38 Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. 853 15.39 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 15.39.1 75 to 80 mm dia pipe. 15.39.2 100 mm dia pipe 15.39.3 150 mm dia pipe 854 15.40 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge : 15.40.1 15 mm to 40 mm nominal bore 15.40.2 Above 40 mm nominal bore 855 15.41 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 metre lead as per direction of Engineer-in-Charge: 15.41.1 Upto 150 mm diameter 15.41.2 Above 150 mm dia upto 300 mm dia. 15.41.3 Above 300 mm diameter 856 15.42 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. 857 15.43 Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. 858 15.44 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 859 15.45 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 860 15.46 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres 15.46.1 Upto 150 mm diameter 15.46.2 Above 150 mm diameter 861 15.47 Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. 862 15.48 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 863 15.49 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge. 864 15.50 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: 15.50.1 100 mm diameter 15.50.2 150 mm diameter 15.50.3 200 mm diameter 15.50.4 250 mm diameter 15.50.5 300 mm diameter 15.50.6 350 mm diameter 15.50.7 400 mm diameter 15.50.8 440 mm diameter 865 15.51 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead : 15.51.1 Rectangular manhole 90x80 cm and 45 cm deep 15.51.2 Rectangular manhole 120x90 cm and 90 cm deep. 15.51.3 Rectangular arch type manhole 140x90cm and 2.45m deep. 15.51.4 Circular manhole 122 cm diameter and 1.68 m deep 866 15.52 Extra for depth of manholes dismantled: 15.52.1 Rectangular manhole 90x80 cm and beyond 45 cm depth. 15.52.2 Rectangular manhole 120x90 cm and beyond 90 cm depth. 15.52.3 Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). 15.52.4 Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). 867 15.53 Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge. 868 15.54 Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : 869 15.55 Demolishing mud phaska in terracing and disposal of material within 50 metres lead. 870 15.56 Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 871 15.57 Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. 872 15.58 Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge : 15.58.1 Water bound macadam road 15.58.2 Bituminous road 873 15.59 Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge : 15.59.1 Up to 600 mm diameter 15.59.2 Above 600 mm diameter 874 15.60 Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge 15.60.1 Up to 150 mm diameter 15.60.2 Above 150 mm diameter 875 15.61 Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling the excavated gap, stacking the useful materials near the site and disposal of unserviceable materials within 50 metres lead. 876 15.62 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead: 15.62.1 120 x 120 cm (outside to outside) 15.62.2 210 x 120 cm (outside to outside) 877 15.63 Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in- charge. 878 15.64 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 879 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. 17.1.2 Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. 880 17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid 17.2.2 W.C. pan with ISI marked black solid plastic seat and lid 17.2.3 Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. 881 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. 17.3.2 W.C. pan with ISI marked black solid plastic seat and lid. 882 17.4 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with 10 liter low level flushing cistern i/c C.P. flush bend. 883 17.5 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 884 17.6 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.6.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern. 17.6.2 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. 17.6.3 Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern. 17.6.4 Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. 885 17.7 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever require 17.7.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. 17.7.2 Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. 17.7.3 Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. 17.7.4 Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. 886 17.8 Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : 17.8.1 Single squatting plate with 5 litre P.V.C. automatic flushing cistern. 17.8.2 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. 17.8.3 Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. 17.8.4 Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. 887 17.9 Providing and fixing white vitreous china water less urinal of size 600x330x315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. 888 17.10 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge. 889 17.11 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : 17.11.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. 17.11.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. 17.11.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. 17.11.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. 17.11.5 White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. 17.11.6 White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. 17.11.7 White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. 17.11.8 White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated lever ISI marked. 17.11.9 White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. 17.11.10 Oval shape wash basin over counter /under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly). 17.11.11 Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap 17.11.12 Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. 890 17.12 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 891 17.13 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. 892 17.14 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 17.14.1 Kitchen sink with drain board 17.14.1.1 510x1040 mm bowl depth 250mm. 17.14.1.2 510x1040 mm bowl depth 225mm. 17.14.1.3 510x1040 mm bowl depth 200mm. 17.14.1.4 510x1040 mm bowl depth 178mm. 17.14.2 Kitchen sink without drain board 17.14.2.1 610x510 mm bowl depth 200 mm. 17.14.2.2 610x460 mm bowl depth 200 mm. 17.14.2.3 470x420 mm bowl depth 178 mm. 893 17.15 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : 17.15.1 Size450x300x150mm 17.15.2 Size600x450x200mm 894 17.16 Providing and fixing White glazed fire clay draining board of size 600x450x25mm with C.I. brackets including painting of brackets, cutting and making good the walls wherever required. 895 17.17 Providing and fixing white vitreous china water closet squatting pan (Indian type) 17.17.1 Long pattern W.C. pan of size 580 mm 17.17.2 Orissa pattern W.C. pan of size 580x440 mm 896 17.18 Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm 897 17.19 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. 898 17.20 Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. 899 17.21 Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 17.21.1 250x130x30 mm 17.21.2 250x125x25 mm 900 17.22 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity 17.22.1 White 17.22.2 coloured 901 17.23 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush capacity) 17.23.1 White 17.23.2 Coloured 902 17.24 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : 17.24.1 White 17.24.2 Black 17.24.3 Coloured (other than black and white) 903 17.25 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. 904 17.26 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively. 905 17.27 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm. 906 17.28 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. 907 17.29 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : 17.29.1 Flat back wash basin of size 630x450mm. 17.29.2 Flat back wash basin of size 550x400mm. 17.29.3 Angle back wash basin of size 600x480mm. 17.29.4 Angle back wash basin of size 400x400mm. 17.29.5 Flat back wash basin of size 450x300mm. 17.29.6 Surgeon type wash basin of size 660x460mm. 908 17.30 Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm. 909 17.31 Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings: 17.31.1 Size 450x300x150 mm. 17.31.2 Size 600x450x200 mm. 910 17.32 Providing and fixing soil, waste and vent pipes: 17.32.1 Sand cast iron socket and spigot (S&S) pipe as per IS: 1729 17.32.1.1 75 mm dia with wall thickness of 5 mm 17.32.1.2 100 mm dia with wall thickness of 5 mm 17.32.2 Spun cast iron socket and spigot (S&S) pipe as per IS: 3989 17.32.2.1 75 mm dia with wall thickness of 3.5 mm 17.32.2.2 100 mm dia with wall thickness of 4 mm 17.32.2.3 150mm dia with wall thickness of 5mm 17.32.3 Hubless Centrifugally cast (spun) iron pipe epoxy coated in side & out side including complete coupling assembly (EPDM rubber gasket stainless steel claim and external metallic/ protective shield as per IS:15905) 17.32.3.1 75 mm dia with wall thickness of 3.5 mm 17.32.3.2 100 mm dia with wall thickness of 3.5mm 17.32.3.3 150mm dia with wall thickness of 4 mm 911 17.33 Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 sand) in S.C.I./ C.I. Pipes : 17.33.1 75 mm dia pipe 17.33.2 100 mm dia pipe 912 17.34 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : 17.34.1 For 75 mm dia pipe 17.34.2 For 100 mm dia pipe 17.34.3 For 150 mm dia pipe 913 17.35 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.35.1 150 mm dia 17.35.1.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.35.1.2 Spun cast iron as per IS – 3989 minimum wall thickness 5 mm 17.35.1.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 17.35.2 100 mm dia 17.35.2.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.35.2.2 Spun cast iron as per IS – 3989 minimum wall thickness 4 mm 17.35.2.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 17.35.3 75 mm dia 17.35.3.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5 mm 17.35.3.2 Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm 17.35.3.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 914 17.36 Providing and fixing plain bend of required degree. 17.36.1 150 mm dia 17.36.1.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.36.1.2 Spun cast iron as per IS – 3989 minimum wall thickness 5 mm 17.36.1.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 17.36.2 100 mm dia 17.36.2.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.36.2.2 Spun cast iron as per IS – 3989 minimum wall thickness 4 mm 17.36.2.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 17.36.3 75 mm dia 17.36.3.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.36.3.2 Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm 17.36.3.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 915 17.37 Providing and fixing heel rest sanitary bend 17.37.1 100 mm dia 17.37.1.1 Sand cast iron as per IS - 1729 17.37.1.2 Spun cast iron as per IS - 3989 17.37.2 75 mm dia 17.37.2.1 Sand cast iron as per IS - 1729 17.37.2.2 Spun cast iron as per IS - 3989 916 17.38 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 17.38.1.1 150X150X150X150 17.38.1.2 Sand cast iron as per IS - 3989 17.38.2 100x100x100x100mm 17.38.2.1 Sand cast iron as per IS - 1729 17.38.2.2 Spun cast iron as per IS - 3989 17.38.3 75x75x75x75mm 17.38.3.1 Sand cast iron as per IS - 1729 17.38.3.2 Spun cast iron as per IS - 3989 917 17.39 Providing and fixing double equal plain junction of required degree. 17.39.1 150X150X150X150 mm 17.39.1.1 Sand cast iron as per IS - 3989 17.39.2 100x100x100x100mm 17.39.2.1 Sand cast iron as per IS – 1729 17.39.2.2 Spun cast iron as per IS – 3989 17.39.2.3 Hubless cast(spun) iron as per IS- 15905 17.39.3 75x75x75x75 mm 17.39.3.1 Sand cast iron as per IS – 1729 17.39.3.2 Spun cast iron as per IS – 3989 17.39.3.3 Hubless cast(spun) iron as per IS- 15905 918 17.40 Providing and fixing single equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.40.1 150X150X150 mm 17.40.1.1 Spun cast iron as per IS - 3989 17.40.2 100x100x100 mm 17.40.2.1 Sand cast iron as per IS - 1729 17.40.2.2 Spun cast iron as per IS - 3989 17.40.3 75x75x75 mm 17.40.3.1 Sand cast iron as per IS - 1729 17.40.3.2 Spun cast iron as per IS - 3989 919 17.41 Providing and fixing single equal plain junction of required degree : 17.41.1 150X150X150 mm 17.41.1.1 Spun cast iron as per IS - 3989 17.41.2 100x100x100 mm 17.41.2.1 Sand cast iron as per IS – 1729 17.41.2.2 Spun cast iron as per IS – 3989 17.41.2.3 Hubless cast(spun) iron as per IS- 15905 17.41.3 75x75x75 mm 17.41.3.1 Sand cast iron as per IS – 1729 17.41.3.2 Spun cast iron as per IS – 3989 17.41.3.3 Hubless cast(spun) iron as per IS- 15905 920 17.42 Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x75x75 mm 17.42.1 Sand cast iron as per IS - 1729 17.42.2 Spun cast iron as per IS - 3989 921 17.43 Providing and fixing double unequal plain junction of required degree: 100x100x75x75 mm 17.43.1.1 Sand cast iron as per IS – 1729 17.43.1.2 Spun cast iron as per IS – 3989 17.43.1.3 Hubless cast(spun) iron as per IS- 15905 922 17.44 Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75 mm 17.44.1 Sand cast iron as per IS - 1729 17.44.2 Spun cast iron as per IS - 3989 923 17.45 Providing and fixing single unequal plain junction of required degree : 100x100x75 mm 17.45.1 Sand cast iron as per IS – 1729 17.45.2 Spun cast iron as per IS – 3989 17.45.3 Hubless cast(spun) iron as per IS- 15905 924 17.46 Providing and fixing double equal plain invert branch of required degree: 17.46.1 100x100x100x100 mm 17.46.1.1 Sand cast iron as per IS - 1729 17.46.1.2 Sand cast iron as per IS - 3989 17.46.1.3 Hubless cast(spun) iron as per IS- 15905 17.46.2 75x75x75x75 mm 17.46.2.1 Sand cast iron as per IS - 1729 17.46.2.2 Spun cast iron as per IS - 3989 925 17.47 Providing and fixing single equal plain invert branch of required degree: 17.47.1 100x100x100 mm 17.47.1.1 Sand cast iron as per IS - 1729 17.47.1.2 Sand cast iron as per IS - 3989 17.47.1.3 Hubless cast(spun) iron as per IS- 15905 17.47.2 75x75x75 mm 17.47.2.1 Sand cast iron as per IS - 1729 17.47.2.2 Sand cast iron as per IS - 3989 17.47.2.3 Hubless cast(spun) iron as per IS- 15905 926 17.48 Providing and fixing double unequal invert branch of required degree : 100x100x75x75 mm 17.48.1 Sand cast iron as per IS - 1729 17.48.2 Spun cast iron as per IS - 3989 927 17.49 Providing and fixing single unequal plain invert branch of required degree : 100x100x75 mm 17.49.1 Sand cast iron as per IS - 1729 17.49.2 Spun cast iron as per IS - 3989 17.49.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 928 17.50 Providing and fixing sand cast iron S&S off sets as per IS: 1729 17.50.1 76 mm off sets 17.50.1.1 With 75 mm dia pipe 17.50.1.2 With 100 mm dia pipe 17.50.2 114 mm off sets 17.50.2.1 With 75 mm dia pipe 17.50.2.2 With 100 mm dia pipe 17.50.3 152 mm off sets 17.50.3.1 With 75 mm dia pipe 17.50.3.2 With 100 mm dia pipe 929 17.51 Providing and fixing sand cast iron S&S off sets as per IS: 3989. 17.51.1 75 mm off sets 17.51.1.1 With 75 mm dia pipe 17.51.1.2 With 100 mm dia pipe 17.51.1.3 With 150 mm dia pipe 17.51.2 150 mm off sets 17.51.2.1 With 75 mm dia pipe 17.51.2.2 With 100 mm dia pipe 17.51.2.3 With 150 mm dia pipe 930 17.52 Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete : 17.52.1 100 mm 17.52.1.1 Sand cast iron as per IS - 1729 17.52.1.2 Spun cast iron as per IS - 3989 17.52.2 75 mm 17.52.2.1 Sand cast iron as per IS - 1729 17.52.2.2 Spun cast iron as per IS - 3989 931 17.53 Providing and fixing terminal guard: 17.53.1 150mm 17.53.1.1 Sand cast iron as per IS - 1729 17.53.1.2 Spun cast iron as per IS - 3989 17.53.1.3 Hubless cast(spun) iron as per IS- 15905 17.53.2 100 mm 17.53.2.1 Sand cast iron as per IS - 1729 17.53.2.2 Spun cast iron as per IS - 3989 17.35.2.3 Hubless cast(spun) iron as per IS-15905 17.53.3 75 mm 17.53.3.1 Sand cast iron as per IS - 1729 17.53.3.2 Spun cast iron as per IS - 3989 17.53.3.3 Hubless cast(spun) iron as per IS- 15905 932 17.54 Providing and fixing collar: 17.54.1 100 mm 17.54.1.1 Sand cast iron S & S as per IS - 1729 17.54.1.2 Sand cast iron S & S as per IS - 3989 17.54.2 75 mm 17.54.2.1 Sand cast iron S & S as per IS - 1729 17.54.2.2 Sand cast iron S & S as per IS- 3989 933 17.55 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter: 17.55.1 150mm 17.55.2 100 mm 17.55.3 75 mm 934 17.56 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 17.56.1 100 mm dia 17.56.2 75 mm dia 935 17.57 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 17.57.1 100 mm inlet and 100 mm outlet 17.57.1.1 Spun cast iron S & S as per IS: 3989. 17.57.1.2 Sand Cast iron S & S as per IS: 1729. 17.57.1.3 Hubless cast(spun) iron as per IS-15905 17.57.2 100 mm inlet and 75 mm outlet 17.57.2.1 Sand cast iron S & S as per IS - 3989 17.57.2.2 Spun Cast iron S & S as per IS- 1729. 17.57.2.3 Hubless cast(spun) iron as per IS- 15905 936 17.58 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 17.58.1 75 mm diameter 17.58.2 110 mm diameter 937 17.59 Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 17.59.1 Coupler 17.59.1.1 75 mm 17.59.1.2 110 mm 17.59.2 Single pushfit Coupler 17.59.2.1 75 mm 17.59.2.2 110 mm 17.59.3 Single tee with door 17.59.3.1 75x75x75 mm 17.59.3.2 110x110x110 mm 17.59.4 Single tee without door 17.59.4.1 75x75x75 mm 17.59.4.2 110x110x110 mm 17.59.5 Bend 87.50 17.59.5.1 75 mm bend 17.59.5.2 110 mm bend 938 17.60 Providing and fixing Unplasticised - PVC pipe clips of approved design to Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete. 17.60.1 75 mm 17.60.2 110 mm 939 17.61 Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet 940 17.62 Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, and washers of size 25x6mm, one bolts on each side of the pipe. 17.62.1 Total bracket length 580mm of approved shape and design (for single, 100mm dia pipe). 17.62.2 Total bracket length 810mm of approved shape and design (for two, 100mm dia pipes). 17.62.3 Total bracket length 1040mm of approved shape and design (for three, 100mm dia pipes). 941 17.63 Cutting chases in brick masonry walls (clay brick/flyash brick/AAC blocks) for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 sand :6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 sand) : 17.63.1 100 mm dia 17.63.2 75 mm dia 17.63.3 50 mm dia 942 17.64 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.64.1 Semi rigid pipe 17.64.1.1 32 mm dia 17.64.1.2 40 mm dia 17.64.2 Flexible pipe (only in residential & complaxes) 17.64.2.1 32 mm dia 17.64.2.2 40 mm dia 943 17.65 Providing and fixing 100 mm sand cast Iron grating for gully trap. 944 17.66 Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. 945 17.67 Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 946 17.68 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing 17.68.1 Circular shape 450mm dia. 17.68.2 Rectangular shape 453x357mm 17.68.3 Oval shape 450x350mm (outer dimensions) 17.68.4 Rectangular shape 1500x450 mm 947 17.69 Providing and fixing glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 948 17.70 Providing and fixing toilet paper holder: 17.70.1 C.P. brass 17.70.2 Vitreous china 949 17.71 Providing and fixing CP brass waste coupling of approved quality and make for sink and wash basin. 17.71.1 Waste coupling 31mm of 79mm length and 62mm breadth 17.71.2 Waste coupling 38mm of 83mm length and 77mm breadth 950 17.72 Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin. 951 17.73 Providing and fixing CP brass towel rail of approved quality and make 17.73.1 600x20mm 17.73.2 450x20mm 952 17.74 Providing and fixing CP brass towel ring of approved quality and make 200mm dia ring 953 17.75 Providing and fixing CP brass soap dish of approved quality and make 954 17.76 Providing and fixing CP brass Urinal spreader of approved quality and make 955 17.77 Providing and fixing C.P. brass soap container 109 mm wide, 125 high and 112 mm distance from wall of standard shape with bracket of the same material with all fittings etc. of approved quality and conforming to IS: specification. 956 17.78 Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification. 17.78.1 100 mm dia. 957 17.79 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. 17.79.1 Waste coupling 31mm dia of 79mm length and 62mm breadth weighing not less than 45gms. 17.79.2 Waste coupling 38mm dia of 83mm length and 77mm breadth, weighing not less than 60gms. 958 17.80 Providing and fixing PTMT Bottle Trap for Wash basin and sink. 17.80.1 Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. 17.80.2 Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263gms. 959 17.81 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. Weighing not less than 105 gms. 960 17.82 Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. 961 17.83 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 17.83.1 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 17.83.2 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. 962 17.84 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. 963 17.85 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. 964 17.86 Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. 965 17.87 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. 966 17.88 Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work. 967 17.89 Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. 968 17.90 Repainting C.I. cistern with synthetic enamel paint of approved colour brand and manufacture on the outside surface of cistern flush pipe, other fittings etc. complete. 969 17.91 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 17.91.1 75 mm diameter pipe 17.91.2 100 mm diameter pipe 17.91.3 150 mm diameter pipe 970 17.92 Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 17.92.1 75 mm diameter pipe 17.92.2 100 mm diameter pipe 17.92.3 150 mm diameter pipe 971 17.93 Repainting bath tub of size 1700x730x430mm with enamel paint. 972 17.94 Providing and laying Ceramic glazed half round pipe drain (having thickness 9 to 10mm) of approved make in colours such as White, Ivory, Grey, or any other colour, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 17.94.1 100 mm dia half round pipe 17.94.2 150 mm dia half round pipe 17.94.3 200mm dia half round pipe 973 17.99 Construction of manually operated fire based incinerator for girls-toilet i/c (i)   Fire and ash collection chamber 0.60x0.60 m, made of calcium silicate bricks, having 12mm dia steel bars grating @10 cm c/c, i/c MS mesh weldedon top including 300 mm x 450 mm MS openable door of half grill and half MS plate (3mm thick ).(ii)     0.40 m X 0.40 m duct made of 1.6 mm thick MS sheet for dropping napkins from the toilet opening.(iv) 150mm dia Class C heavy duty MS pipe conforming to IS 3589/1239 for gas emission with cowel, up to 2.10 meter height above terrace level.(v) Opening in wall having MS flap (1.6mm thick) of size 0.25X 0.25 m, finished with granite.etc complete as per standard drawing no. 5313-B-NB4-9919- R1 dated 21.02.2017 17.99.1 For ground floor buildings. 17.99.2 For Ground floor & Ist floor buildings. 17.99.3 Add extra for every additional floor above Ist floor. 974 17.95 Providing and fixing coupler for PVC pipes & fittings waste/rain water/drainage disposal of superior Indian make (as approved by Engineer incharge) i/c jointing with rubber rings, adhesive, lubricant,solvent cement PVC clips or burried underground i/c making necessary chases and holes in walls, floors or trenching complete with making good or i/c excavation and refilling as per site requirement with testing etc.complete. FOR WASH BASIN CONNECTION (40mm diameter) 975 18.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 18.6.1 Internal work - Exposed on wall 18.6.1.1 15 mm nominal outer dia Pipes. 18.6.1.2 20 mm nominal outer dia .Pipes. 18.6.1.3 25 mm nominal outer dia .Pipes. 18.6.1.4 32 mm nominal outer dia Pipes. 18.6.1.5 40 mm nominal outer dia Pipes. 18.6.1.6 50 mm nominal outer dia .Pipes. 18.6.2 Concealed work including cutting chases and making good the walls etc. 18.6.2.1 15 mm nominal outer dia .Pipes. 18.6.2.2 20 mm nominal outer dia .Pipes. 18.6.2.3 25 mm nominal outer dia Pipes. 18.6.2.4 32 mm nominal outer dia Pipes. 976 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work 18.7.1 15 mm nominal outer dia Pipes. 18.7.2 20 mm nominal outer dia .Pipes. 18.7.3 25 mm nominal outer dia Pipes. 18.7.4 32 mm nominal outer dia .Pipes. 18.7.5 40 mm nominal outer dia Pipes. 18.7.6 50 mm nominal outer dia .Pipes. 18.7.7 62.50 mm nominal inner dia Pipes. 18.7.8 75 mm nominal inner dia .Pipes. 18.7.9 100mm nominal inner dia .Pipes. 18.7.10 150 mm nominal inner dia Pipes. 977 18.8 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. 18.8.1 Internal work - Exposed on wall 18.8.1.1 15 mm dia. nominal bore 18.8.1.2 20 mm dia. nominal bore 18.8.1.3 25 mm dia. nominal bore 18.8.1.4 32 mm dia. nominal bore 18.8.1.5 40 mm dia. nominal bore 18.8.1.6 50 mm dia. nominal bore 18.8.2 Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall. 18.8.2.1 15 mm dia nominal bore 18.8.2.2 20 mm dia nominal bore 18.8.3 External work : including trenching and refilling etc. 18.8.3.1 15 mm dia. nominal bore 18.8.3.2 20 mm dia. nominal bore 18.8.3.3 25 mm dia. nominal bore 18.8.3.4 32 mm dia. nominal bore 18.8.3.5 40 mm dia. nominal bore 18.8.3.6 50 mm dia. nominal bore 18.8.3.7 65 mm dia. nominal bore 18.8.3.8 80 mm dia. nominal bore 978 18.9 Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) 18.9.1 Internal work - Exposed on wall 18.9.1.1 15.88 mm outer diapipe 18.9. 1.2 22.22 mm outer diapipe 18.9.1.3 28.58 mm outer diapipe 18.9.1.4 34.00 mm outer dia Pipe 18.9.1.5 42.70 mm outer dia Pipe 18.9.1.6 48.60 mm outer dia Pipe 18.9.2 Internal work - Concealed Pipe 18.9.2.1 15.88 mm outer dia .Pipes. 18.9.2.2 22.22 mm Outer diaPipes 979 18.12 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.12.1 With C.I. wheel of approved quality (screwed end) 18.12.1.1 25 mm nominal bore 18.12.1.2 32 mm nominal bore. 18.12.1.3 40 mm nominal bore 18.12.1.4 50 mm nominal bore 18.12.1.5 65 mm nominal bore 18.12.1.6 80 mm nominal bore 18.12.2 With brass lever handle of approved quality. 18.12.2.1 25 mm nominal bore 18.12.2.2 32 mm nominal bore. 18.12.2.3 40 mm nominal bore 18.12.2.4 50 mm nominal bore 980 18.13 Providing and fixing CPVC gate valve with knob of approved quality. 18.13.1 25 mm nominal bore 18.13.2 32 mm nominal bore. 18.13.3 40 mm nominal bore 18.13.4 50 mm nominal bore 981 18.14 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 18.14.1 15 mm nominal bore 18.14.2 20 mm nominal bore 18.14 3 25 mm nominal bore 982 18.15 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 18.15.1 25 mm nominal bore 18.15.1.1 Horizontal 18.15.1.2 Vertical 18.15.2 32 mm nominal bore 18.15.2.1 Horizontal 18.15.2.2 Vertical 18.15.3 40 mm nominal bore 18.15.3.1 Horizontal 18.15.3.2 Vertical 18.15.4 50 mm nominal bore 18.15.4.1 Horizontal 18.15.4.2 Vertical 18.15.5 65 mm nominal bore 18.15.5.1 Horizontal 18.15.5.2 Vertical 18.15.6 80 mm nominal bore 18.15.6.1 Horizontal 18.15.6.2 Vertical 983 18.16 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 18.16.1 15 mm nominal bore 18.16.2 20 mm nominal bore 18.16.3 25 mm nominal bore 984 18.17 Providing and fixing uplasticised PVC connection pipe with brass unions : 18.17.1 30 cm length 18.17.1.1 15 mm nominal bore 18.17.1.2 20 mm nominal bore 18.17.2 45 cm length 18.17.2.1 15 mm nominal bore 18.17.2.2 20 mm nominal bore 985 18.18 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :- 18.18.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. 18.18.2 With well burnt flyash bricks of 50 kg/sqm compressive strength. 986 18.19 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design 18.19.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. 18.19.2 With flyash bricks of 50 kg/cm2 strength 987 18.20 Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.20.1 With common burnt clay bricks of 25 kg/cm2 compressive strength. 18.20.2 With flyash bricks of 50kg/cm2 strength. 988 18.21 Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.21.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. 18.21.2 With flyash bricks of 50kg/sqm compressive strength. 989 18.22 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 18.22.1 15 mm diameter pipe. 18.22.2 20 mm diameter pipe. 18.22.3 25 mm diameter pipe. 18.22.4 32 mm diameter pipe. 18.22.5 40 mm diameter pipe. 18.22.6 50 mm diameter pipe. 990 18.23 Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 18.23.1 15 mm diameter pipe. 18.23.2 20 mm diameter pipe. 18.23.3 25 mm diameter pipe 18.23.4 32 mm diameter pipe 18.23.5 40 mm diameter pipe 18.23.6 50 mm diameter pipe 991 18.24 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 18.24.1 15 mm diameter pipe 18.24.2 20 mm diameter pipe 18.24.3 25 mm diameter pipe 18.24.4 32 mm diameter pipe 18.24.5 40 mm diameter pipe 18.24.6 50 mm diameter pipe 18.24.7 65 mm diameter pipe 18.24.8 80 mm diameter pipe 992 18.25 Providing and filling sand all-round the G.I. pipes in external work. 18.25.1 15 mm diameter pipe 18.25.2 20 mm diameter pipe 18.25.3 25 mm diameter pipe 18.25.4 32 mm diameter pipe 18.25.5 40 mm diameter pipe 18.25.6 50 mm diameter pipe 18.25.7 65 mm diameter pipe 18.25.8 80 mm diameter pipe 993 18.26 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 18.26.1 15 mm nominal bore 18.26.2 20 mm nominal bore 18.26.3 25 mm nominal bore 18.26.4 32 mm nominal bore 18.26.5 40 mm nominal bore 18.26.6 50mm nominal bore 18.26.7 65mm nominal bore 18.26.8 80 mm nominal bore 994 18.27 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 18.27.1 15 mm nominal bore. 18.27.2 20 mm nominal bore. 18.27.3 25 mm nominal bore. 18.27.4 32 mm nominal bore. 18.27.5 40 mm nominal bore. 18.27.6 50 mm nominal bore. 18.27.7 65 mm nominal bore. 18.27.8 80 mm nominal bore. 995 18.28 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 996 18.29 Providing and fixing brass bib cock of approved quality 18.29.1 15 mm nominal bore 18.29.2 20 mm nominal bore 997 18.30 Providing and fixing brass stop cock of approved quality : 18.30.1 15 mm nominal bore 18.30.2 20 mm nominal bore 998 18.31 Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, and weighing not less then 400 kg, 15 mm nominal bore. 999 18.32 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore. 1000 18.33 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore 1001 18.34 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. 1002 18.35 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore 1003 18.36 Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore. 1004 18.37 Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. nd weighing not less than 650 gm,a15 mm nominal bore 125 mm long foam flow. 1005 18.38 Providing and fixing C.P. brass basin mixer of approved quality and make conforming to IS: specification.15 mm nominal bore. 1006 18.39 Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1007 18.40 Providing and fixing C.P. brass sink mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1008 18.41 Providing and fixing C.P. brass elbow operated bibcock of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1009 18.42 Providing and fixing C.P. brass elbow operated pillar cock of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1010 18.43 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 18.43.1 100 mm diameter 18.43.2 150 mm diameter 18.43.3 200 mm diameter 1011 18.44 Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore. 18.44.1 86 mm long weighing not less than 88 gm 18.44.2 122 mm long weighing not less than 99 gm 18.44.3 165mm long weighing not less than 110 gm 18.44.4 90mm long weighing not less than 93 gm 1012 18.45 Providing and fixing PTMT stop cock of approved quality and colour. 18.45.1 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 18.45.2 20mm nominal bore, 89mm long. Weighing not less than 88 gms. 18.45.3 Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. 1013 18.46 Providing and fixing PTMT pillar cock of approved quality and colour. 18.46.1 15mm nominal bore, 107mm long. Weighing not less than 110 gms. 18.46.2 15mm nominal bore, 125mm long foam flow weighing not less than 120 gms. 1014 18.47 Providing and fixing PTMT, push cock of approved quality and colour. 18.47.1 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 18.47.2 15 mm nominal bore, 80mm long weighing not less than 46 gms. 1015 18.48 Providing and fixing PTMT grating of approved quality and colour. 18.48.1 Circular type. 18.48.1.1 100 mm nominal dia. 18.48.1.2 125 mm nominal dia with 25 mm waste hole. 18.48.2 Rectangular type with openable circular lid. 18.48.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating. 1016 18.49 Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. 1017 18.50 Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms. 1018 18.51 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 18.51.1 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 18.51.2 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 18.51.3 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. 18.51.4 40mm nominal bore, 206mm long. Weighing not less than 690 gms. 18.51.5 50mm nominal bore, 242mm long. Weighing not less than 1240 gms. 1019 18.52 Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour 15 mm nominal bore 18.52.1 30cm length. 18.52.2 45 cm length. 1020 18.53 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 18.53.1 15 mm nominal bore.Weighing not less than 32 gms. 18.53.2 20mm nominal bore.Weighing not less than 40gms. 18.53.3 25mm nominal bore.Weighing not less than 62 gms. 1021 18.54 Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 18.54.1 80 mm nominal bore 18.54.2 100 mm nominal bore 18.54.3 150 mm nominal bore 18.54.4 200 mm nominal bore 1022 18.55 Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 18.55.1 80 mm nominal bore 18.55.2 100 mm nominal bore 18.55.3 150 mm nominal bore 18.55.4 200 mm nominal bore 1023 18.56 Cutting holes upto 30x30 cm in walls including making good the same : With common burnt clay bricks of 25 kg /sqcmor flyash bricks of 50 kg/cm2compressive strength. 1024 18.57 Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. 1025 18.58 Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. 1026 18.59 Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba. 1027 18.60 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 18.60.1 25 to 40 mm nominal bore 18.60.2 50 to 80 mm nominal bore 1028 18.61 Providing and fixing CP jet assembly to including connection etc complete. 1029 18.62 Providing and fixing ferro- cement water storage tank with cover, having minimum thickness of 10mm. The wall to be reinforced with two layers of double galvanized annealed square wooven wire mesh of 20 gauge wire spaced at 15mm for 300 litre capacity and 12mm for 450 to 2500 litres capacity finish with 3 layers of Cement mortar 1:2 duly modified with polymer based plastizers and hardening chemicals (Burogrout and Buroseal) The tank should conform to the specification prescribed by Structural Engineering Research Centre Roorkee/Gaziabad. The tanks to be painted with drinking water paint inside and aluminimum paint out side with provision of outlet, inlet, overflow and cleaning including hoisting and placing in position upto floor two level or 5 M. height. 1030 18.63 Add extra for additional floor lift beyond 5.0M.height. 1031 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 19.1.1 100 mm diameter 19.1.2 150 mm diameter 19.1.3 200 mm diameter 19.1.4 230 mm diameter 19.1.5 250 mm diameter 19.1.6 300 mm diameter 1032 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 19.2.1 100 mm diameter S.W. pipe 19.2.2 150 mm diameter S.W. pipe 19.2.3 200 mm diameter S.W. pipe 19.2.4 230 mm diameter S.W. pipe 19.2.5 250 mm diameter S.W. pipe 19.2.6 300 mm diameter S.W. pipe 1033 19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design : 19.3.1 100 mm diameter S.W. pipe 19.3.2 150 mm diameter S.W. pipe 19.3.3 200 mm diameter S.W. pipe 19.3.4 230 mm diameter S.W. pipe 19.3.5 250 mm diameter S.W. pipe 19.3.6 300 mm diameter S.W. pipe 1034 19.4 Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 19.4.1 110 mm diameter OD (min. wall thickness 3.2mm) 19.4.2 160 mm diameter OD (min. wall thickness 4.0mm) 19.4.3 200 mm diameter OD (min. wall thickness 4.9mm) 19.4.4 250 mm diameter OD (min. wall thickness 6.2mm) 19.4.5 300 mm diameter OD (min. wall thickness 7.7mm) 1035 19.5 Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design: 19.5.1 110 mm diameter PVC. pipe 19.5.2 160 mm diameter PVC. pipe 19.5.3 200 mm diameter PVC. pipe 19.5.4 250 mm diameter PVC. pipe 19.5.5 300 mm diameter PVC pipe 1036 19.6 Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of PVC. pipes including bed concrete as per standard design : 19.6.1 110 mm diameter PVC. pipe 19.6.2 160 mm diameter PVC. pipe 19.6.3 200 mm diameter PVC. pipe 19.6.4 250 mm diameter PVC. Pipe 19.6.5 300 mm diameter PVC pipe 1037 19.7 Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 19.7.1 100x100 mm size P type 19.7.1.1 With well burnt bricks 19.7.1.2 With Sewer bricks conforming to IS : 4885 19.7.2 150 x 100 mm size P type. 19.7.2.1 With well burnt bricks 19.7.2.2 With sewer bricks conforming to IS : 4885 19.7.3 180x150 mm size P type 19.7.3.1 With well burnt bricks 19.7.3.2 With Sewer bricks conforming to IS : 4885 1038 19.8 Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : 19.8.1 100 mm dia. R.C.C. pipe 19.8.2 150 mm dia. R.C.C. pipe 19.8.3 250 mm dia. R.C.C. pipe 19.8.4 300 mm dia. R.C.C. pipe 19.8.5 450 mm dia. R.C.C. pipe 19.8.6 500 mm dia. R.C.C. pipe 19.8.7 600 mm dia. R.C.C. pipe 1039 19.9 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design 19.9.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.9.1.1 With well burnt bricks 19.9.1.2 With Sewer bricks conforming to IS : 4885 19.9.2 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : 19.9.2.1 With well burnt bricks 19.9.2.2 With Sewer bricks conforming to IS : 4885 19.9.3 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : 19.9.3.1 With well burnt bricks 19.9.3.2 With Sewer bricks conforming to IS : 4885 1040 19.10 Extra for depth for manholes 19.10.1 Size 90x80 cm 19.10.1.1 With well burnt bricks 19.10.1.2 With Sewer bricks conforming to IS : 4885 19.10.2 Size 120x90 cm 19.10.2.1 With well burnt bricks 19.10.2.2 With Sewer bricks conforming to IS : 4885 1041 19.11 Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : 19.11.1 With well burnt bricks 19.11.2 With Sewer bricks conforming to IS : 4885 1042 19.12 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m 19.12.1 With well burnt bricks 19.12.2 With Sewer bricks conforming IS : 4885 1043 19.13 Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) 19.13.1 With well burnt bricks 19.13.2 With Sewer bricks conforming IS : 4885 1044 19.14 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : 19.14.1 With well burnt bricks 19.14.2 With Sewer bricks conforming IS : 4885 1045 19.15 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 19.15.1 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : 19.15.1.1 With well burnt bricks 19.15.1.2 With Sewer bricks conforming IS : 4885 1046 19.16 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : 19.16.1 With well burnt bricks 19.16.2 With Sewer bricks conforming IS : 4885 1047 19.17 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : 19.17.1 With 20x20 mm square bar 19.17.2 With 20 mm diameter round bar 1048 19.18 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. 1049 19.19 Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size): 19.19.1 With 20x20 mm square bar 19.19.2 With 20 mm diameter round bar 1050 19.20 Supplying and fixing C.I. cover without frame for manholes : 19.20.1 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. 19.20.2 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 19.20.3 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. 1051 19.21 Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality 19.21.1 Light duty D- 2.5 19.21.1.1 Rectangular shape 600x450mm internal dimensions 19.21.1.2 Square shape 450mm internal dimensions 19.21.1.3 Circular shape 450mm internal diameter 19.21.2 Medium duty - 10 19.21.2.1 Square shape 450mm internal dimension 19.21.2.2 Circular shape 500mm internal diameter 19.21.3 Heavy duty D - 20 19.21.3.1 Circular shape 560 mm internal diameter 19.21.4 Extra Heavy Duty - 35 19.21.4.1 Circular shape 560 mm internal dia. 1052 19.22 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. 1053 19.23 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 19.23.1 For pipes 100 to 230 mm diameter 19.23.2 For pipes 250 to 300 mm diameter 19.23.3 For pipes 350 to 450 mm diameter 1054 19.24 Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) with cement mortar 1:1 (1 cement : 1 sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 19.24.1 100 mm dia. sand cast iron drop connection 19.24.2 150 mm dia. sand cast iron drop connection 1055 19.25 Extra for depths beyond 60 cm of sand cast iron drop connection complete : 19.25.1 For 100 mm dia. sand cast iron drop connection 19.25.2 For 150 mm dia. sand cast iron drop connection 1056 19.26 Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Brick work for Raising depth of manhole to be paid separately) : 19.26.1 Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 19.26.2 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 19.26.3 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 19.26.4 Circular manhole 140 cm dia with circular cover 600 mm dia of grade Extra heavy duty HD -35 1057 19.27 Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : 19.27.1 With well burnt bricks 19.27.2 With fly ash bricks 100 key/cm2 strangth 1058 19.28 Constructing brick masonry road gully chamber 45x45x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) with precast R.C.C. vertical grating complete as per standard design : 19.28.1 With well burnt bricks 19.28.2 With fly ash bricks 100 kg/cm2 strength 1059 19.29 Constructing brick masonry road gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : 19.29.1 With well burnt bricks 19.29.2 With fly ash bricks 100 kg/cm2 strength 1060 19.30 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.30.1 With well burnt bricks 1061 19.31 Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. 1062 19.32 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 19.32.1 100 mm dia 19.32.2 150 mm dia 1063 19.33 Providing, laying and jointing half round glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 19.33.1 100 mm dia 19.33.2 150 mm dia 19.33.3 200 mm dia 19.33.4 230 mm dia 19.33.5 250 mm dia 19.33.6 300 mm dia 1064 19.34 Providing and laying half round RCC pipes class (light duty) with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : Excavation to be paid seperataly 19.34.1 100 mm dia. Half round R.C.C. pipe 19.34.2 150 mm dia. Half round R.C.C. pipe 19.34.3 250 mm dia. Half round R.C.C. pipe 19.34.4 300 mm dia. Half round R.C.C. pipe 1065 19.35.1 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.1.1 & 19.9.1.2 19.35.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.2.1 & 19.9.2.2 19.35.3 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.3.1 & 19.9.3.2 1066 19.36 Providing & Fixing of Precast RCC drain cover of size 600x 450 x70mm (thickness) with 4 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. 1067 19.37 Providing & Fixing of Precast RCC drain cover of size 750x600 x70mm (thickness) with 6 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. 1068 19.38 Providing & Fixing of Precast RCC drain cover of size 900x450 x90mm (thickness) with 8 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @ top face will have broom finish etc complete. 1069 19.39 Providing & Fixing of Precast RCC drain cover of size 1150x400 x100mm (thickness) with 10 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. 1070 19.40 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 900X450mm rectangular having weight of (complete unit) (weight of frame 11.7 kg + weight of cover 43.76kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. 1071 19.41 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 450X600mm rectangular having weight of (complete unit) (weight of frame 1.84kg + weight of cover 14.2kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. 1072 19.42 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 300X300mm (square) having weight of (complete unit) (weight of frame 1.12kg + weight of cover 4.1kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. 1073 19.43 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 600mm (round) having weight of (complete unit) (weight of frame 13.6kg + weight of cover 43.1kg + - 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5 mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement 1074 19.44 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 500mm (round) having weight of (complete unit) (weight of frame 11.2kg + weight of cover 41.78kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement 1075 19.45 Deduct for not providing and installing FRP/GRP manhole cover size 19.45.1 900mmx450mm (weight of cover 43.76kg ± 10%) 19.45.2 450mmx600mm (weight of cover 14.2kg ± 10%) 19.45.3 300mmx300mm (weight of cover 4.1kg ± 10%) 19.45.4 600mm (weight of cover 41.78kg ± 10%) 19.45.5 500mm (weight of cover 43.1kg ± 10%) 1076 19.46 Providind, laying and jointing HDPE Double Wall corrugated (DWC) pipes (excavation to be paid seperately) 19.46.1 100 mm dia to 110 mm dia 19.46.2 150 mm dia to 160 mm dia 19.46.3 200 mm dia 19.46.4 250 mm dia 19.46.5 300 mm dia 1077 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion. 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) 21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) 21.1.2 For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). 21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) 21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) 21.1.3 Deduct for not providing EDPM rubber/neoprene gasket all around. 1078 21.2 Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. 21.2.2 Pre-laminated particle board with decorative lamination on both sides. 1079 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) 21.3.2 With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). 1080 21.4 Add extra for providing and fixing froasted glass instead of float glass 21.4.1 With glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) 21.4.2 With glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 21.4.3 With glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). 1081 21.5 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : 21.5.1 With stainless steel cover plate - minimum 1.25 mm thickness 21.5.2 With brass cover plate - minimum 1.25 mm thickness. 1082 21.6 Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). 1083 21.7 Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge. 1084 21.8 Providing and fixing machine moulded aluminium covering of approved pattern and design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick and 15 mm dia, at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-Charge : 21.8.1 Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 21.8.2 Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) 1085 21.9 Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width 1086 21.10 Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. For fixed portion & for shutters of doors, windows and ventilators 1087 21.11 Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete. 1088 21.12 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick and length as required with SS screws etc complete as per direction of Engineer-in-Charge. 21.12.1 Anodized (AC 15 ) aluminium tubular handle bar 21.12.2 Powder coated minimum thickness 50 micron aluminium tubular handle bar. 21.12.3 Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar. 1089 21.13 Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 1090 21.14 Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). 1091 21.15 Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. 21.15.1 Anodized (AC15) aluminium 21.15.2 Powder coated minimum thickness 50 micron aluminium. 21.15.3 Polyester powder coated minimum thickness 50 micron aluminium. 1092 21.16 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-Charge 21.16.1 Anodized (AC15 ) aluminium 21.16.2 Powder coated minimum thickness 50 micron aluminium 21.16.3 Polyester powder coated minimum thickness 50 micron aluminium. 1093 21.17 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. (Only weight of grill to be measured for payment). 1094 21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately). 1095 21.19 Providing and fixing 50 micron thick reflective one way type heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. 1096 21.20 Providing and fixing 50 micron thick Frosted heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. 1097 21.21 Providing and fixing 25 micron thick Non reflective heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in- charge of approved brand and make. 1098 21.22 Providing and fixing 12 mm thick toughened glass including all connectors and fixing accessories all complete for partitions, cubicals etc. As per direction of Engineer-in-Charge. 1099 21.24 Extra for froasted glass (with eching film) in item No. 21.22 1100 22.1 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge consisting of: (i)     Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound conforming to IS: 2645 in the recommended proportion over the levelling course ( levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii)         2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportions. (iii)        Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. (with 5 years service guarantee) Using rough Kota stone. 1101 22.2 Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge (with 5 years service guarantee) Using rough Kota stone. 1102 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : a)   Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. b)   IInd course of 20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. c)    IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. d)      IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) (with 5 years service guarantee) 1103 22.4 Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete (with 5 years service guarantee) 22.4.1 Serrated with central bulb (225mm wide, 8- 11mm thick). 22.4.2 Dumb bell with central bulb (180mm wide, 8mm thick). 22.4.3 Kickers (320mm wide, 5mm thick). 1104 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a)  First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)  Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 1105 22.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a)     After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b)    Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c)   Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. 1106 22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a)  Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b)  Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in- Charge: (with 5 years service guarantee) With average thickness of 120mm and minimum thickness at khurra as 65 mm. 1107 22.8 Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea-sized gravel spread at 6 cubic decimeter per square metre including preparation of surface but excluding grading complete with : (with five years service gurantee). Bitumen felt (hessian base) type 3 grade I conforming to IS: 1322. 1108 22.9 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee). 1109 22.10 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, complete. (With five years service gurantee). 1110 22.11 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or/ and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee) 1111 22.12 Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm down size or pea sized gravel at 6 cudm per sqm. 1112 22.13 Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. 1113 22.14 Grading roof for receiving water proofing treatment with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) 22.14.2 Cement mortar 1:3 (1 cement : 3 sand) 22.14.3 Cement mortar 1:4 (1cement : 4 sand) 1114 22.15 Providing and laying insitu six course water proofing treatment with APP (Atactic poly- propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm,conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. (with 5 years service guarantee) 1115 22.16 Providing and laying in situ four course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with 5 years service guarantee). 1116 22.17 Providing and laying in situ six course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with five years service gurantee). 1117 22.18 Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2mm thick water proofing membrane for corrugated roof sheets, black finished reinforced with glass fibre matt consisting in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. (With five years service gurantee). 1118 22.19 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer of the membrane shall be as under:Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : (with 5 years service guarantee) 1119 22.20 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: (with 5 years service guarantee). 1120 22.21 Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. [for item No. 22.18 to 22.20] 1121 22.22 Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of (i)   Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii)     Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80% chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2nd coat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per manufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area. (iv) The treated area should be cure with water for 48 hrs. by flooding the surface. (v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee) 1122 22.23 Providing water proofing treatment over Roof, Wall, Chhajjas, Balcony with Rubberized elastomeric cold applied liquid waterproofing membrane blend of special resin and rubber with more than 1300% elongation (confirming ASTM-D2370-98), at leakage/seepage area consisting of the following operation. (i)Removal of damaged waterproofing treatment if any like bituminous membrane / plaster/ brick bat koba/screeding etc. (ii) Surface preparation: Roughening of surface by scrubbing with steel wire/ Nylon brush/ Removing all dust particles and washing with adequate water to clean completely, opening of cracks in V groove in size of 5mm x 10m (WxD), filling of cracks with elastomeric creak filler/PU sealent repair of potholes and holor making on roof surface by polymer mortar with adding SBR bonding agent. (iii) Providing and applying 1st coating of rubberized elastomeric liquid membrane as primer (ratio 1:2 1 part liquid membrane and 2 part water) by brush/ Roller/ Spray having minimum thickness of 70-80 micron. Allow the coating to set in natural air for minimum 2 hrs, then put reinforcement by laying 45gsm fibre glass mesh and applying 2nd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 20% water) with minimum thickness 100-120 micron. Allow the coating to set in natural air for minimum 12 hrs. (iv) Providing and applying 3rd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 10% water). Total DFT (Dry film thickness) thickness after 3rd coat must be 280-300 micron and consumption in three coats @ 6.5kg for 10sqm. (v) Providing and applying 4th and 5th coat of High quality waterproof membrane in white colour, single component special synthetic resin based flexible thixotropic white color coating with excellent UV resistance (SRI - 144) with more than 300% elongation (confirming ASTM D 412-98) in ratio: 1 part membrane and 10% water thickness of 200 micron DFT in two coats, with average consumption @ 5kg per 10 sqm. After application of fourth coat let it air dry for minimum 3 hrs before application of fifth coat. (vi) The treated area must be tested for water leakage/seepage by flooding with water for 48 hrs (vii) Application of membrane coating shall be got done by authorized applicator of manufacturer. (viii) 5 years of service guarantee to be provided.All above operations to be done in order as per direction on Engineer-in-Charge. 1123 22.24 Supplying and applying fibre reinforced, UV resistant elastomeric liquid applied waterproofing & Heat reflective coating coating with PU Hybrid polymers & acrylic fibers. The coating shall resist 10 bars of water pressure as per DIN 1048 standards, with elongation of 350% as per ASTM D412 & crack bridging of upto 2.5mm conforming to ASNZ standard. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and as per the direction of Engineer-in-Charge. 1124 22.25 Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and as per direction of Engineer-in-Charge. 1125 22.26 Providing and applying UV Stable polyurethane liquid water proofing membrane having Sun Reflectivity Index (SRI) of 106 on top of concrete roof / Retainning wall / Old layer of bituminous surfaces / Polyurethane foam and metal surfaces in three or more coats @20kg/ 10 sqm consisting of a coat of two component epoxy primer in ratio of 1:3(one part of resin and 3 parts of hardner) at a consumption of 2kg/10sqm. the vital physical and chemical parameters shall be as under : Min Elongation at break of 600% as per ASTM D412 and tensile strength of 3.0 N/mm2 as per ASTM D412. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and direction of Engineer-in-Charge. 1126 22.27 Supplying & installing waterproofing treatment by using 1.2 mm thick HDPE membrane before casting of the base RCC slab. The pre-applied membrane gets bonded to the underneath of the poured concrete used as base slab. The membrane shall consist of a thick HDPE film, a highly aggressive pressure sensitive adhesive and weather resisting coating which bonds integrally to poured concrete of base slab. The membrane shall conforms to basement waterproofing protection to grades 2, 3 & 4 as defined in BS 8102:2009. The waterproofing membrane shall have following minimum properties: a)    Resist hydrostatic pressure of up to 70 m head of water as per ASTM D5385; b)      Puncture Resistance of 950 N (as per ASTM E154) c)      Elongation of >400 % (as per ASTM D412) d)    Peel Strength of concrete: >1500 N/m (as per ASTM D903) e)      Tensile strength of 28.2 MPA (as per ASTM D412). 1127 22.28 Providing and applying 2.0 mm thick twin colour flexible PVC waterproofing membrane. Flexibility under low temperatures as per EN 495-5 should be < - 20degC. On all horizontal surfaces Geotextile 300 Gsm to be laid over PCC, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane provide 300 Gsm Geotextile Then protection screed of suitable thickness. On all vertical surfaces Geotextile 300 Gsm to be laid along with Vertical wall, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane providing protection layer of Drain Board HDPE Dimple sheet before back filling of soil. 1128 22.29 Providing and applying waterproofing & Heat reflecting roof coating with 100% acrylic elastomeric polymers. Contains 30% Volume solid, tensile strength 8 kg/cm², crack bridging, VOC 30 ± 5 gm/ltr upto 2 mm. then applying two coats with forced coverage of 20 sqft/ltr/two coats. The operation shall be carried out after scrapping & propely clening the surface to remove loose particles with wire brush/Jet washer. Apply 1 coat @1 ltr/10 sqm & 3 undiluted coats @ 8 ltr/10 sqm with 4 hrs interval of each coat.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. 1129 22.30 Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush. Apply 2nd coat with filling of crack fill paste when the surface is tacky but not dried completely with putty knife & spatula.After 4 hours of application 2nd coat apply 3rd coat of Crack fill paste. The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer-in-Charge 1130 22.31 Providing & applying single pack component, solvent-free, cold applied, Polyurethane modified, elastomeric liquid applied waterproofing membrane- PU coat with excellent UV resistant capacity, The material shall meet the requirement as specified in ASTM D2370-98 of elongation at break of film>350% with geotextile fleece =50% approx.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. The product performance shall carry guaranteed for 5 year against any leakage. 22.31.1 For Horizontal surface (with Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 22.31.2 For Horizontal surface (without Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 1131 22.32 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and Compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-Charge. The product performance shall carry guarantee for 10 years against any leakage. 1132 22.33 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on positive side. The crystalline slurry shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. 22.33.1 For vertical surface two coats @ 0.70 kg per sqm 22.33.2 For horizontal surface one coat @1.10 kg per sqm. 1133 22.34 Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. crystalline dryshake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product Performance shall carry guarantee for 10 years against any leakage. 1134 22.35 Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge.The product performance shall carry guarantee for 10 years against any leakage. 22.35.1 For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. 22.35.2 For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @ 0.070 kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline mortar @ 0.040 kg per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040 kg to fill the hole) 1135 22.36 Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. 1136 22.37 Providing and applying waterproofing treatment in bathroom or tiled balcony area without breaking or removing tiles, by using waterproofing sheets as per manufacturers data sheet instructions. Permitting use of bathroom/balcony after 24 hours of application of treatement, Complete with materials and labour and gurantee of leakage for a period of 5 year. 1137 23.11 Providing and fixing 2 mm thick homogeneous conductive PVC (Poly Vinyl Flooring) EN (European Standard), total weight is 3250 g/m2, approx. PUR (Polyurethane Reinforced ), abrasion group P: ≤2.00 mm, residual indentation approx. 0.03 mm, anti-bacterial and fungal resistance, castor wheel test qualified, dimensional Phthalate free, directional in design.The floor finish should be termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto 100mm.Recommended to use in area like ICU , Post operative, Recovery rooms, OPD, Patient rooms, Corridors ,passages etc. 1138 23.12 Providing and fixing permanently static dissipative pressed homogeneous conductive PVC ( Poly Vinyl Flooring) EN (European Standard), anti static, wear layer thickness is 2mm (EN429), vinyl flooring having carbon backing with total weight 3000 g/m2 ESD approved, restorable properties, available in rolls. 100% recyclable (eco - freindly). Low VOC emission after 28days of installation (lower than ≤100μg/m3), Phthalate free non-directional in Design. Recommended to use in area like Operation theater, ICU, Server room, etc. 1139 23.13 Providing and fixing 0.92mm thick hetrogeneous compact PVC (Poly Vinyl Wall Covering) for Interior wall area, with wear layer thickness 0.12mm of PVC, EN(European Standard) total weight is 1500 g/m2, approx PUR (Polyurethane Reinforced), good resistance to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28 days of installation (lower than ≤10μg/m3), phthalate free, directional in design, The wall finish should termite free at the room perimeter. Recommended to use in area like OT,ICU, Corridors, Patient Room etc. 1140 23.14 Providing and fixing 1.3mm thick homogeneous PVC (Poly Vinyl Wall Covering) for interior area with wear layer thickness 1.3 mm of PVC, EN (European Standard) total weight is 2100 g/m2,approx. PUR (Polyurethane Reinforced), good resistant to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28days of installation (lower than ≤10μg/m3), phthalate free, directional in design.The wall finish should termite free at the room. Recommended to use in area like OT.ICU,Corridors, Passages , Patient Room Etc 1141 23.15 Supply and installation of 2mm thick homogeneous vinyl flooring, Highest abrasion wear rating Group T (EN660), binder content exceeds 55% of the flooring composition, no waste technology, consisting of PVC resin, plasticizers and stabilizers, type I. flooring ( (EN ISO 23997) max 0.4%, Abrasion group (MSZ EN 660-1) T, Fire resistance EN 13501-1 BF1-s1, Slip resistance DIN 51130 R9, EN 13893 DS, electrical resistance EN 1815 <2 kv, Chemical resistance EN ISO 26987, Castor chair resistance EN ISO 4918, Hygenie Bacterial resistant, Seaming method - hot welding, finishing complete . Recommended to use in area like Operation theater, ICU, Server room, etc. 1142 24.8 Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self- drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. 1143 24.9 Providing and fixing thermal insulation with Resin Bonded glass wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by crisscrossing GI wire etc. complete as per directions of Engineer-in-Charge. 24.9.1 Providing and fixing insulation with resin bonded Glass wool 24.9.2 Providing and fixing insulation with resin bonded Rock wool 1144 24.11 Providing and fixing precoatedgalvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsmlength upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1145 24.12 Providing and fixing precoatedgalvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws complete : 24.12.1 Ridges plain (500 - 600mm). 24.12.2 Flashings/ Aprons.( Upto 600 mm) 24.12.3 North light curves. 24.12.4 Barge board (Upto 300 mm). 24.12.5 Crimp curve 24.12.6 Gutter. (600 mm over all girth). 1146 25.1 Providing and fixing white vitreous china Anti germ Fluoro-Polymer Coated Water closet squatting pan with 100 mm sand cast Iron P and S- trap, and 7.2 liter Low level, dual flush, PP (Poly Propylene) made open slim wall hung cistern capacity 3 liter/6 liter flushing, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. 25.1.1 White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440x575x250 mm With integral foot rests. (Premium Range) 25.1.2 White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410x515x255 mm with integral foot rests. (Premium Range) 1147 25.2 Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. 25.2.1 Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) 25.2.2 Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) 1148 25.3 Providing and fixing white vitreous china European Wall hung Anti germ Fluoro-Polymer Coated water closet of approved shape with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propylene) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. 25.3.1 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380x520x375 mm with solid poly propelyne made soft closing seat cover (Premium Range) 25.3.2 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390x570x365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) 25.3.3 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500x360 mm with solid poly propelyne made, soft closing seat cover (Premium Range) 25.3.4 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360x500x330 mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) 1149 25.4 Providing and fixing white vitreous china Anti germ fluoro-polymer coated couple water closet flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete . 25.4.1 Anti germ Fluoro-Polymer Coated couple water closet Size 420x710x810 mm with solid poly propelyne made soft closing seat cover. (Premium Range) 25.4.2 Anti germ Fluoro-Polymer Coated couple water closet Size 380x610x805 mm with solid poly propelyne made soft closing seat cover. (Premium Range) 25.4.3 Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) 25.4.4 Anti germ Fluoro-Polymer Coated couple water closet Size 375 x 650 x 800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) 1150 25.5 Providing and fixing white vitreous china Anti germ fluoro-polymer coated single piece W.C. dual flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. 25.5.1 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370x695x795 mm with solid poly propelyne made soft closing seat cover.(Premium Range) 25.5.2 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 395x710x730 mm with solid poly propelyne made soft closing seat cover.(Premium Range) 25.5.3 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 385 x 720 x 710mm with solid poly propelyne made soft closing seat cover.(Premium Range) 25.5.4 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 x 640 x 685 mm with solid poly propelyne made soft closing seat cover.(Premium Range) 1151 25.6 Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet along with dual flushing cistern flushing capacity 3 & 6 litre approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. 25.6.1 Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 760X360X635mm with solid poly propelyne made soft closing seat cover (Premium Range) 25.6.2 Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 380x650x730 mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) 1152 25.7 Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with C.I. Brackets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. 25.7.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) 1153 25.8 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology), 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. 25.8.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 570x820x195 mm with wall mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) 25.8.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x820x195 mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology). (Premium Range) 1154 25.9 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted single lever concealed basin mixture, (cartridge size 32 mm) 32 mm C. P. brass waste coupling length 130mm and 32 mm C. P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) 25.9.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) 25.9.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185 mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) 1155 25.10 Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with 15 mm Table mounted single lever Tall boy basin mixture, (cartridge size 32 mm) 15mm quarter turn angular stop cock, 32 mm C. P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. 25.10.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) 25.10.2 White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140 mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) 1156 25.11 Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated urinal (Inbuilt spreaders, bottle trap and ceramic waste coupling) with 15mm brass pressmatic auto closing concealed urinal flush valve with wall flange (decol technology, 400000 operation warranted) i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . 25.11.1 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) 25.11.2 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 475x315x715 mm. (Premium Range) 25.11.3 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 385x325x635 mm. (Premium Range) 1157 25.12 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . 25.12.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock. (Premium Range) 25.12.2 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) 1158 25.13 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) with 15mm Brass made pressmatic (Decol technology, 400000 operation warranted) concealed flushing Stop cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . 25.13.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480x300x740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) 1159 25.14 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensor complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required. 25.14.1 White Vetrious China made Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) Size 340x325x650 mm with sensor (Premium Range) 25.14.2 Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 7475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor for flushing. (Premium Range) 1160 25.15 Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with chrome plating. (Premium Range) 1161 25.16 Providing & Fixing 8mm thick froasted Urinal glass partition size height 900 mm top width 450mm and bottom width 300mm brass made bracket with chrome plating. (Premium Range) 1162 25.17 Providing & Fixing plain bath tub of size 180x80x47cm body made of PMMA (Poly Methyl metha acrylate) with 20mm wooden reinforcement. (Premium Range) 1163 25.18 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Pillar cock. (Premium Range) 1164 25.19 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Bib cock. (Premium Range) 1165 25.20 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating. 10 micron and chrome plating 0.3 micron, quarter turn) Angular stop cock. (Premium Range) 1166 25.21 Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Concealed stop cock. (Premium Range) 1167 25.22 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Wall Mixer with 115mm bend. (Premium Range) 1168 25.23 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 3-in1 Wall Mixer .(Premium Range Sanitary Ware) 1169 25.24 Providing and fixing in position best Indian C. P. brass made quarter turn (Ceramic disc Size 25mm) Flush Cock for Indian W. C. (Orissa Pan). (Premium Range) 1170 25.25 Providing and fixing in position best Indian single Lever Auto Mixing Wall Mixer (Cartridge Size 40mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) 1171 25.26 Providing and fixing in position best Indian single Lever Auto mixing Basin Mixer (Cartridge Size 32mm, nickel plating 0.10 micron and chrome plating 0.3 micron) For Wash Basin area use only. (Premium Range) 1172 25.27 Providing and fixing in position best Indian single Lever Auto Mixing Diverter (Cartridge Size 47mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) 1173 25.28 Providing and fixing in position best Indian C. P. brass made Spout (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1174 25.29 Providing and fixing in position best Indian C. P. brass made Shower Arm Length 300mm (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1175 25.30 Providing and fixing in position best Indian C. P. brass made Shower Arm Length 450mm (nickel plating 0.10 micron and chrome plating 0.3 micron).(Premium Range Sanitary Ware) 1176 25.31 Providing and fixing in position best Indian C. P. brass made Shower Arm Length 600mm (nickel plating 0.10 micron and chrome plating 0.3 micron) .(Premium Range Sanitary Ware) 1177 25.32 Providing and fixing in position best Indian shower rose 300x300mm square body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range Sanitary Ware) 1178 25.33 Providing and fixing in position best Indian shower rose 150mm dia, body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) 1179 25.34 Providing and fixing in position best Indian shower rose 200mm dia body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles .(Premium Range) 1180 25.35 Providing and fixing in position best Indian shower rose 240mm body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) 1181 25.36 Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 2- way Bib Cock .(Premium Range) 1182 25.37 Providing and fixing in position best Indian Health Faucet with 8mm dia 1.20 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall).(Premium Range Sanitary Ware) 1183 25.38 Providing and fixing in position best Indian Auto Closing Pillar Cockdody with 65 mm extension (with DECOL cartridge) for wash basin use. (Premium Range) 1184 25.39 Providing and fixing in position best Indian Auto Closing Bib Cock with built in control cock wihh wall flange (with DECOL cartridge) for common area use. (Premium Range) 1185 25.40 Providing and fixing in position best Indian Auto Closing Urinal valve open type with built in control cock wihh wall flange (with DECOL cartridge) for urinal use only. (Premium Range) 1186 25.41 Providing and fixing in position best Indian Auto Closing Urinal valve concealed type (with DECOL cartridge) for urinal use only. (Premium Range) 1187 25.42 Providing and fixing in position best Indian Auto Closing wall mounted Pillar Cock (with DECOL cartridge) for wash basin use only. (Premium Range) 1188 25.43 Providing and fixing in position best Indian Auto Closing 40mm Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) 1189 25.44 Providing and fixing in position best Indian Auto Closing 40mm Dual Flow (3.0/6.0 liter) Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) 1190 25.45 Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range) 1191 25.46 Providing and fixing in position best Indian Sensotronic Sensor Faucet for Wash Basin use only. (Premium Range) 1192 25.47 Providing and fixing in position best Indian Sensotronic Sensor battery & electrical oprated type (9V transformer) Faucet For Urinal use only. (Premium Range) 1193 25.48 Providing and fixing in position best Indian Sensotronic Sensor concealed type Faucet For Wall Mounted Water Closet use only. (Premium Range) 1194 25.49 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 300 mm long. (Premium Range) 1195 25.50 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 600 mm long. (Premium Range) 1196 25.51 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Swivel Towel holder Twin Type. (Premium Range) 1197 25.52 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Ring Square. (Premium Range) 1198 25.53 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish Holder. (Premium Range) 1199 25.54 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dispenser with Metallic Bottle. (Premium Range) 1200 25.55 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Tumbler Holder. (Premium Range) 1201 25.56 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet paper holder with Flap. (Premium Range) 1202 25.57 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet Roll Holder. (Premium Range) 1203 25.58 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Glass Self-size 600mm with toughened glass (Premium Range) 1204 25.59 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Double coat Hook. (Premium Range) 1205 25.60 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Towel Rake 600 mm. (Premium Range) 1206 25.61 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) W. C. Brush Holder. (Premium Range) 1207 25.62 Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with. (Premium Range) 1208 25.63 Wall Hung Basin: Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) 25.63.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) 25.63.2 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) 25.63.3 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) 25.63.4 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 500x440x385 mm. (Premium Range) 25.63.5 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 635x485x305 mm. (Premium Range) 1209 25.64 Wall Hung Basin ; Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, 15 mm C. P. brass pillar cock, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) 25.64.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 635x430x190 mm. (Premium Range) 1210 25.65 Providing and fixing in position best Indian, quarter turn table mounted sink mixer (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1211 25.66 Providing and fixing in position best Indian, quarter turn wall mounted sink cock (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1212 25.67 Shower Glass Cubical: Providing and fixing toughen glass shower enclosure conformed Is 2553 (part 1. 1990) or IS 14900. 2000 or IS 2835.1987 or IS 14450. 2000 with C. P. brass 5 Year warranted hardware, 19mm dia SS 304 grade stabilizer, all plastic Parts of food grade plastic and all glass shall be toughened at 700 degree Celsius and Anti lime scale treated including painting of fittings, cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) 25.67.1 Providing and fixing corner entry 6 mm toughen glass made to measurement shower enclosure size 1200mm x1200mm x 1950mm with aluminum profile on sides, shower enclosure with door sliding on both sides. (Premium Range) 25.67.2 Providing and fixing 8 mm toughen glass wall to wall sliding shower enclosure with one fixed glass and one silding door with a Towel Rod Fixed on the fixed glass size Hight:2000 mm Width: 1500mm to 2000mm. (Premium Range) 25.67.3 Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed withwall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) 1213 25.68 Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed with wall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) 1214 25.69 providing and fixing white tempered glass showerpenal with special Surface body materials tempered glass with glass special surface PVC back. ABS Movable tops Shower, 4 moveable ABS body massage jets, Hand shower with fiexible hose,Brass Sout, shelf, Thermostatic mixer with diverter, 40 cm stainless steel braided hose, Minimum water pressure required 2 bar. 1215 25.70 Thermostat Mixer : Providing and fixing in position best Indian, concealed high flow bath and shower mixer with thermostatic control cartridge (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) 1216 25.71 Providing and fixing in position best Indian, exposed wall mounted bath and shower mixer with thermostatic control cartridge with button attachment on spout with connecting legs and wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) .(Premium Range) 1217 25.72 Providing and fixing in position best indian, eko exposed shower mixer (wall mounted) with thermostatic control cartridge, 115mm long bend pipe on lower side, connecting legs and wall flange (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) 1218 25.73 Providing and fixing in position best Indian, exposed shower mixer (tub mounted) with thermostatic control cartridge, with button attachment on spout with straight legs (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) 1219 25.74 Providing and fixing in position best Indian, 4 - way diverter consisting of concealed body and wall flange for multiple shower working with one shut-off position and 3 outlets for body shower, head shower and spout ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) 1220 25.75 Providing and fixing in position best Indian, thermostatic concealed high flow control valve with wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) 1221 25.76 Medical Faucets : Providing and fixing in position best indian, single lever surgical purpose elbow action basin mounted mixer with extended Operating lever without popup waste system with 450mm long braided hoses (cartage size32mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) 1222 25.77 Providing and fixing in position best Indian, surgical purpose elbow action pillar cock with extended Operating lever.( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) (Premium Range) 1223 25.78 Providing and fixing in position best Indian, surgical purpose elbow action wall mounted pillar cock with extended Operating lever and wall flange. (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) 1224 25.79 Providing and fixing in position best Indian, 692mm long, satin finish C. P. Brass grab bar made of 304 grade ss i/c all nuts and screw (0.3 micron chrome and 10 micron nickel plated). (Premium Range) 1225 25.80 Providing and fixing in position best Indian, satin finish, C. P. Brass grab bar with left/right 90 degree angle, made of 304 grade ss i/c all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) 1226 25.81 Providing and fixing in position best Indian, C. P. Brass grab bar vertical swing, 304 grade ss made all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) 1227 25.82 Providing and fixing 8mm thick frosted safety glass Urinal partition size 900mm height and 450mm width, fixed with C P brass bracket of appropriate size i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete.(Premium Range) 1228 27.4 Providing and fixing Stainless steel plate 304 grade of 1.50mm thick, including writing with Embossing of letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. 1229 27.5 Providing and fixing of name plate for offices name of Stainless steel plate 304 grade of 1.50mm thick, including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. 1230 27.6 Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with 1.25m Chromium plated Steel Pipe 15mm dia, compete as per direction of Engineer-in-Charge. 1231 27.7 Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer-in-Charge. 1232 27.8 Providing and fixing stainless steel English (Capital) and Hindi letters in standard pattern bellow type made with 1.20 mm thick stainless steel (ASI Grade- 304 ) Depth of letter shall not be less than 30mm and rate includes welding/soldering of joints polishing, buffing and fixing on the wall, plate and beam surface at any height with necessary nut and bolts/fastener wherever is required complete as per direction of Engineer-in-Charge. 1233 27.10 Providing and fixing of prestressed vertically casted concrete panels (both surfaces should be smooth and having grooves on both faces) of M-40 grade of concrete of size 2100x300x50 mm having minimum 4 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed horizontally in full length of panel with prestressed precast concrete column of M-40 grade of size 3000x150x150 mm having minimum 7 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed vertically in full length to erect precast boundary wall panels to height 2100 mm from GL including excavation of pit of size 750x750x900 mm in all kind of soil except rock for erection of columns and grouting the pit with M-20 grade of concrete. Manufacturing, transportation and installation at site all complete as per the direction of Engineer-in-Charge. 1234 27.11 Extra for every additional height of 0.3 m up to height of wall 3 m 1235 28.35 Providing and fixing of 3 seater stone bench made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1500mm, width 600mm, legs height 500 mm, back support height 500mm. 1236 28.36 Providing and fixing of stone planter (bench) made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1200mm, width 500mm, legs height 500 mm. 1237 28.37 Providing and fixing of stone table made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1000mm, width 600mm, legs height 750 mm. 1238 28.38 Providing and laying C.C. pavement of mix M- 25 with ready mixed concrete from batching plant including centering and shuttering complete. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, with wire brush etc. complete as per specifications and directions of Engineer- in-Charge.Note: Cement content considered in this item is @ 330 kg/cum. 1239 29.1 Preparation of site plan and location plan with total station surveying showing all individual structures and features like trees, roads, culverts, nallas, electric poles, telephone poles, sewer lines, chambers, water supply lines, hand pumps, well etc. complete along with showing location of roads proposed in master plan. i/c Contours of entire area at 0.5 m. intervals using auto level, preparing of site plan in soft copy (using autocad) in suitable scale as desired by engineer-in-charge duly indicating north direction. Rate includes providing 1 digital copy and six hard copies, one print on tracing film, khasra map duly showing the land and location plan (index plan) and google image of the land. Rates are inclusive of transportation charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) 29. 1.1 Upto 1 Hectare 29.1.2 1 Hectare to 2 Hectare 29.1.3 Add extra for each additional one Hectare or part there off 29.1.4 Excavation of trial pit of size 1.20 m X 1.20 m with minimum depth of 0.9 m and maximum depth of 3.5m as directed by the Engineer in Charge. Trial pit shall be taken at suitable location/ locations as directed by Engineer in charge and shall be indicated on the site plan showing details of soil strata. 1240 29.2 Preparation of double line plan after measurement of internal as well as external dimensions of existing buildings/structures and plotting the same in suitable scale as directed by Engineer-in-charge. 1241 29.3 Preparing of double line plan for planning of addition and alteration work after measurement of internal as well as external dimensions and details of existing door window, ventilator openings and partitions, addition /alteration done previously in buildings/structures and plotting the same separately showing sectional elevations (minimum two numbers) and all elevations along with all relevant details like doors, windows stairs etc in suitable scale as directed by Engineer-in-charge. The consultant shall also submit detailed condition survey report. 1242 29.4 Performing Plate Load Test (P.L.T.) for Determining soil bearing capacity (SBC) at site including submission of Geotechnical Report and recommending bearing capacity in accordance with IS-1888-1982 (Without Conveyance). 1243 29.5 Performing Standard Penetration Test for determining soil bearing capacity (SBC) in accordance with IS-2131-1981 and submission of Geotechnical Report on bearing capacity based on SPT in accordance with IS-6403-1981 (Without Conveyance) 1244 29.6 Transportation charges for transportation of Geotechnical testing equipments for plate load test or standard penetration test upto a distance of 100km. (upto 100km going and 100km returning from district H.Q. both way) Rates are inclusive of Loading and unloading of testing equipments and other incidental charges during both journeys to be paid only once for one set (separate for PLT or SPT) of testing. 29.6.1 Up to 100km (both way) 29.6.2 Add extra for distance beyond 100km and upto 150km. (both way) 29.6.3 Add extra for every additional km beyond 150km (both way) 1245 29.7 Preparation of detailed estimate on the basis of the working drawing supplied by the department and current SOR applicable, including computation of bill of quantities (BOQ) of material and supplying the same in six hard copies and one soft copy to the Engineer-in-Charge and if required revision of the same without any additional charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) The estimate shall be prepared only in standard format prescribed as per appendix 14 of this SOR. 1246 29.8 Preparation of DPR including site visit to verify contours & soil reports and preparation of master plan of campus including architectural working drawings and estimates in prescribed format as per appendix 14 of this SOR to obtain AA; and there after architectural drawings for statutory approvals and detail drawings at construction stage; and as constructed drawings on completion of work the DPR. Bifurcation of professional fee payable in stages as per this item shall be in accordance with List-1, List-2 & List-3. Given in preambles of this chapter 3.All work such as preparation of DPR, working drawings, statuary drawings, details drawings and as constructed drawings shall be done by the same architect/consultant to ensure consistency in services, even if time required to complete all stages as per Activity sheet exceeds the contract period. 1247 29.9 Preparation of the structure design & drawings by a structural engineer empanelled with the Chief Architect MP PWD on the basis of architectural drawings supplied/approved by the department, in accordance with relevant codes/manuals and according to the Terms & Conditions, prescribed in Activity Sheet No-1, List-4 given in Annexure-14 appended with SOR. Design and drawing shall also include ‘Tables’ for the bar-bending schedules (BBS) and concrete/steel consumption. The design and drawing shall be submitted to the Engineer-in-Charge in six hard copies and one soft copy for execution. The payment shall be done in accordance with relevant stage in activity sheet and list. 29.9.1 First time design work 29.9.1.1 Built up area upto 500 sqm 29.9.1.2 Built up area more than 500 sqm and upto 3000 sqm 29.9.1.3 Built up area more than 3000 sqm. 29.9.2 Repetition of structural design of a structural design done by the structural himself or by any other structural engineer at different site, where S.B.C. or seismic zone is different.(only plinth area payment to be paid) 29.9.2.1 Plinth area upto 500 sqm 29.9.2.2 Plinth area more than 500 sqm and upto 3000 sqm 29.9.2.3 Plinth area more than 3000 sqm 1248 29.10 Assessment of load carrying capacity and structural soundness of existing building mainly comprising of R.C.C. structure using existing information such a existing drawing, design and footing details, if available. The consultant shall carry out destructive/non destructive testing of structure at site including site investigation which may require opening of footings by digging adjoining ground fill and restore backfill structure after testing is done. This work shall be performed by a structural engineer (proof checking) empanelled with the chief Architect MP PWD Bhopal or any government engineering college. The rate shall include all charges for labour, testing, consultation of geotechnical consultant and site visit to carry out site testing Per Sqm (built up area of wing/block of existing building where construction is proposed). 1249 29.11 Drafting structural drawing on the basis of the structural design supplied by the department in accordance with all relevant codes/manuals and as per IS: 1893- 2002 and IS: 13920-1993 with updation. The work shall include making revision/compliance if any and obtaining approval of drafting work, without any additional cost within time specified by the Engineer-in-Charge or from the competent authority. The drawings for approval shall be submitted to the Engineer- in- Charge in two hard copies (minimum size A-2) and there after fair drawings on 100 micron film along with seven copies of amonia prints (minimum size A-1) and one soft copy. Drawings shall be stamped and signed with the statement that Drafted by me as per structural design done or got done by the department. Note:- This work can be done only through a person having qualification of Diploma in civil engineering/BE (civil engineering) and having certificate in AutoCAD issued by AutoDesk or by its authorized institution.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Madhya Pradesh View Result →
21.
Educational and Research Institute #9703230 AOC
Bids Are Invited For Radiation Survey Meter (Q3) Total Quantity : 1
Contract Date: Ref. Documents Contract Value : ₹ 3.06 Lakh
Boards / Undertakings / PSU No of Bidders 3
Kerala View Result →
22.
Health and Family Welfare #9632571 AOC
Bids Are Invited For Gamma Zone Monitor , Radiation Survey Meter Total Quantity : 2
Contract Date: Ref. Documents Contract Value : ₹ 2.29 Lakh
Government Departments No of Bidders 4
Puducherry View Result →
23.
Science and Technology #9551427 AOC
Bids Are Invited For Radiation Survey Meter (Q3) Total Quantity : 1
Contract Date: Ref. Documents Contract Value : ₹ 2.17 Lakh
Government Departments No of Bidders 4
Kerala View Result →
24.
Defence #9545191 AOC
Tender For Provision Of Solar Power Plant At Sevoke Mil Station Under Ge Sevoke Road.; 2 Design, procurement, erection, installation, testing and commisioning including connecting to local utility grid; Grid connected solar photovoltaic plant 0.8 MW output peak capacity with net billing arrangement including Solar Photovoltaic Modules,DC Cabling, Module Mounting Structures (suitable for ground mountingwith and including Soil Investigation as per OEM recommendation, RCC foundation framed structure and other connected civil work duly vetted by IIT / NIT), Array Combining Boxes, ACDB, DCDB, Lightining Protection of SPV modules and other accessories, String Inverter as Power Conditioning Unit, Weather Station and Data Monitoring system (SCADA) all as per detailed specifications given in tender documents, latest MNRE/SECI/NISE/IREDA guidelines and directions, meeting the Make in India (DCR), consisting of all requisite accessories (BOS-Balance of system) and including the following main components (NOTE : The work shall be executed directly by OEM only through contractor.) Item Continued as 1.01 to 1.45 3 (A) Photo Voltaic Module: Mono-crystalline Silicon Bifacial Solar Photovoltaic Modules of minimum 550 Wp(module power and number of modules to be selected according to available area), having cell efficiency more than 20% under standard conditions, form fill factor more than 0.76, plant performance ratio > 75%, made of high transmitivity glass front surface and it shall give high encapsulation gain (transmittance above 90% and bending less than 0.3%). The modules shall have the following features :(a) The electrical parameters of SPV modules under standard test condition of irradiance 1000W/sqm, AM 1.5 Spectrum and temp 25 degree Celsius shall be as under : (i) Max Peak Power Pmax : 550 Wp or more (ii) Voltage at Max Power : > 40 V (iii) Current at Pmax :> 10A 4 (iv) Short Circuit Current :> 12A (v) Open Circuit Voltage :> 47 V (vi) Module Efficiency : > 20%(b) Rated output of the modules shall have positive tolerance of 3-5% and no negative tolerance is allowed.(c) It shall perform satisfactorily in RH 85% with temperature up to +85 degree C and should withstand wind of 200 kmph on the surface of panel.(d) PV modules shall be warranted for their output peak watt capacity, and it shall not fall of its initialvalue below 90% in first 10 year end and 80% after the end of 25 years.(e) Each module shall have RFID tag encapsulated with solar cell bearing following details (i) Name of Manufacturer of SPV Module (ii) Name of Manufacturer of Solar Cell 5 (iii) Month and year of Manufacturing (separately for cell and module) (iv) Country of Origin (both cell and module) (v) Peak wattage, Im, Vm and fill factor of the module (vi) Date of year of obtaining IEC PV module qualification certificate including the test lab issuing IEC certificate. (vii) Unique serial no of model no of module (viii) IV curve of module(ix) Other relevant information on traceability of solar cells & modules(f) The temperature coefficient of power for the module shall not be more than 0.50% per degree Celsius.(g) The module must have bypass diode of suitable capacity.(h) PV module must confirm to latest edition of IEC 61215/ IS 14286. In addition the modules must confirm to IEC 61730 Part I and II for construction and testing & safety qualifications and confirming to IEC 62804 PID.(j) It shall also be in conformity to latest minimum technical specification issued by MNRE/IREDA/SECI/NISE/ALMM from time to time. Modules should be of MNRE/IREDA/SECI/NISE/ALMM approved companies and as per latest IEC/IS standards. 6 (k) RFID reader is to be provided by contractor(l) Both PV cells and SPV modules shall be made in India (DCR).(m) Each structure should have angle of inclination as per the site conditions to generate maximum power. However, to accommodate more capacity the angle inclination may be reduced to 10 - 13 Degree until the plant meets the specified performance ratio requirements.(n) Fire Points with Fire extinguisher liquefied CO2 gas of capacity 10 kg and adequate qty confirming to relevant IS or ISI mark complete as recommended by manufacturer deemed to be included in the unit rate quoted.(o) Danger Board and Rubber mat as recommended by manufacturer deemed to be included in the unit rate quoted.(p) S&F Pressure Booster pump electrically operated with minimum 3 HP 02 Nos (Running+ standby) three Phase AC Supply motor and having head not less than 20 mtr, including PCC foundation civil wokrs and necessary cable required for connection in drawn in PVC conduit heavy duty/ DWC/Electrode pipe from existing nearest point to the motor starter panel including motor starter suitable capacity,PP-R IS-15801 (Polypropylene random co-polymer) pipe 3-layer 63 mm/50 mm/32 mm/25 mm inner dia (outer green coloured UV stablilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded grade PN-10 SDR-11 ( Pressure nominal 10KGS/cm2 ) having thermal stability for hot & cold water supply including all types of plain and brass threaded PPR fittings of any size such as elbow, tees, FTA and MTA etc laid in trenches with necessary exavation, removing and returning filling work and including all accessories from the new PVC tank cap 10000 Ltrs install at proposed site for cleaning of entire solar power plant system.(q) SPV Panel is to be fixed in such a way that lower portion of the Panel remains atleast above 1.5 mtr of finished reflecting surface and cost deemed to be included in the quoted rates. 7 (B) Junction Boxes: Junction boxes of suitable Nos (as per design)/OEM recommendations inputs and suitably rated out put having separate DCfuses for both (+)&(-) on input and isolator on output terminal for each string.Each junction box must have as pare input terminal.The junction boxes shall be dust and vermin proof and water proof made of FRP/ Thermo Plast with IP 65 protection in compliance with IEC 62208 and shall be UV resistant, fire retardant. It shall have surge protection and maintenance free earthing as per relevant standard. The junction box shall have suitable arrangement of the following: (a) The strings are required to be connected to the copper bus bar through individual fuses. (b) Provide arrangement for disconnection (DC dis-connection switch) for each SJB/ SCB. (c) To provide a test point for each sub group for quick fault location and to provide group array isolation. (d) Each array box shall be of relevant IEC standard. (e) Each array junction box shall have suitable bypass & reverse blocking diodes for minimum DC blocking voltage of 1000V with suitable arrangement of its connection. Reverse blocking and bypass diodes shall work for extreme temperatures and shall have efficiency of 99.98% confirmed by appropriate IEC standard. 8 (C) DC Cables: Suitable size of XLPE insulated tinned Copper cable (min 10 sqmm) of solar grade, 1100 Volts and UV resistant for outdoor installations confirming to IEC : 60227/15694 & 60502/ IS : 1554 (Pt I&II)) and shall be as under : (a) All cables and connectors must be as per IS/IEC standards and shall be able to withstand harsh environmental conditions including high temperature, UV radiations, rain, dirt, burial and attack by moss and microbes for 25 years and voltage as per latest IEC/IS. (b) All the cables / wires shall be provided with UV resistant printed ferrules for DC wires. (c) The size of the cable shall be such that average voltage drop at full power from PV module to inverter shall be less than 1.5%. (d) Cable batch No., Drum No, IS code and size and make shall be mentioned on every one meter or as per OEM practice. (e) The wiring of the module interconnection shall be in UPVC/HDPE pipe of suitable size. (f) The cost of interconnecting DC Copper cable, MS cable trays, MS cable trays suitable to accommodate Solar grade cables from SPV module to inverter are included in the item. 9 (g) Boring of holes under road, pavement, hard standing by trenchless technology (HDD) GI protection pipe up to 100 mm bore (dia), maximum 2.5 metre below of apron areain ant type of soilcomplete.Note : (i) All the precaution to be taken by the contractor before drilling the bore. The contractor has to take plan of existing cables any type and pipe line in existing area before drilling the bore. (ii) Any damage to existing cables any type and pipe line in the way of drilling the bore will be repaired and make good by the contractor within 24 hours. No extra cost will be paid in this account. (iii) Contractor has to get the survey of route, length and depth for boring before quoting the rate. (iv) Connected items like HDPE/PPR/DWCPE pipes, exavation, removing, return filing, channel, any type of metal work is not measured and paid separately under relevant items.(D) Module Mounting Structure (MMS) (Suitable for ground mounting on any type of soil condition) :Design, procure, fixing, support structure made of hot dipped galvanised steel with min 85 micron thickness including necessary PCC / RCC foundation and associated work (cutting, grounding, PCC filling, disposing waste material,etc., complete) and fixing mounting arrangement suitable for SPV modules so as it can with stand wind speed of 170 km per hour & minimum yield strength off 250 MPa. The mounting structure is to be installed on ground. Mounting structures to be so designed that maximum load is directly on ground. It shall also observe minimum space without sacrificing the out put of SPV panels & adequate spacing between the arrays shall be available for easy cleaning and maintenance. Nuts, bolts, protected from the atmosphere and weather mounting structure shall have to be adequately of Stainless Steel of grade SS316. 10 NOTES :- (a) Two numbers of anti theft fasteners of Stainless Steel on two diagonally opposite corners of each module shall be provided. (b) Module mounting structure shall be fitted to provide maximum generation. (c) MMS design shall be supported with Staddpro Report vetted by Third Party (Gov Institute) and submitted for the approval of the Accepting Officer. (d) The height of approved design MMS for solar power plant shall be as per latest MNRE/IREDA/SECI/ NISE guidelines. (e)Minimum grade of RCC M-25, design mix (using 20mm graded crushed stone aggregate includingTMT bar as per design, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete and other connected works as per design and OEM recommendation. Civil work shall be designed through approved consultant of MES as per latest MNRE/IREDA/SECI/ NISE guidelines and vetted by IIT / NIT.(E) Lightning Protection forentire Solar Power Plant (i.e PV Array, Inverter etc) : Design, procure and fix lighting arrestor system confirming toIS/ IEC-62305(Part1-4)on the ground. The air terminal shall be fixed at the top of MS pole with base so as to beat least two meter above the pole to be protected. Its height above 9 mtr level shall be depend upon the level of protection and protection radii required. 11 NOTES :-(i) The cost of all equipments, MS Pole, Copper strip upto earth test point,LA, etc., shall be deemed to be included in this item. (ii) The cost of sufficient earthing for lightning protection is also included in this item to be provided by Engr-in-charge. and no extra payment will be made to the contractor on this account (iii) The complete system shall include chemical earthing (as per OEM recommendations) and earth strip/cable etc for earth of SPV module, array, inverter,DC & AC boxes and for LA etc as per latest IS/MNRE/IREDA/NISE/SECI/ALMM specifications and guidelines.No separate cost of the same is included in the schedule and amount will be paid to the contractor on this account. In case of any dispute, decision of Engr in charge will be final, conclusive and binding to contractor. (The earthing shall be of copper earth plate and having specification as per SSR Item Sr 19474). Earth resistance shall not be more than 3 Ohms. (iv)Separate LA arrangement & the design document of the same shall also be submitted. (v) The protection against induced high voltage shall be provided by the use of metal oxide varistors and suitable earthing such that induced transient find and alternate route to earth. (vI) SPV Power Plant shall be provided with lightening and over voltage protection. (vii) Internal surge protection shall consist of three MOV type surge-arrestors connected from +ve abd +ve terminals to earth (via Y arrangement) 12 (F)Power Conditioning Unit: Procure, fixing, testing and commissioning of minimum 4 (Four) unitswith overall not less than 800 KW output on 11 KV AC supply, Solar-power inverter suitable for without DC power of Solar PV module/ array with AC output further feeding to grid confirming to IEC:61683 for efficiency, IEC:62109-1 or equivalent for safety and IEC:62093 for reliability. The input DC & output AC technical specification of Inverter are as under :Input (DC) (a) Max Absolute DC input Voltage : 1000 V (b) Start-up DC input voltage : 200 - 500 V (Default 420V) (c) Operating input DC voltage range : 200 - 1000 V (d) No of independent MPPT : One (e) MPPT input DC voltage range at Pacr : 180 - 1000 V DC (f) Max input DC Current : As per design. (g) AC grid connection type : 3Phase (4W + PE) (h) AC output power : As per design. (j) Max AC output Apperant power : As per design. (k) Max AC output Current : As per design. (l) Max AC fault current : As per design. 13 (m) Nominal Output Voltage : 800 Volts AC 3phase or as per the design of Solar Stepup Transformer (n) Output voltage range :± 10% (o) Output Frequency : 50 Hz ± 3Hz (p) Power factor : > 0.99 (q) Harmonic Distortion Current : < 3% (r) Efficiency : > 98% (s) Standby operation consumption : < 1.5 W(t) Operating temperature upto 85 degree centigrade (u) The Copper based inverter shall have minimum IP-67 protection, ground fault monitoring, reverse polarity protection, anti-islanding, DC reverse polarity, AC and DC short circuit current and over current, AC and DC over voltage and over temperature. 14 (v) The inverter shall adjust voltage and frequency levels to suit the grid. (w) The inverter shall be self commulated with Pulse Width Modulation (PWM) technology and shall be capable of synchronise maximum with in one min. (x) Maximum Power Point Tracker (MPPT) confirming to IEC 62093 shall be integrated in the inverter to maximise the energy drawn from the PV array (y) Monolithic design of inverter is not permitted. (z) Shall have anti-Islanding features. (aa) The inverter shall have suitble nos of protected inputs (asper design) and outgoing shall be protected by ACB/MCCB. (ab) The inverter should have MODBUS, PROFIBUS, ETHERNET common ports. (ac)The inverte rshall include appropriate self protection and self diagnostic features to protect itself and the PV array fromthedamageintheeventof invertercomponent failureor fromparametersbeyondtheinverterssafeoperatingduetointernaland/orexternalcauses. Invertershallhaveprotectionarrangementagainst ground leakage faults, over voltage, (SPD) & over current. Inverter shall have arrangement for adjustment for adjusting DC input current and shall trip against sustainable fault down stream and shall not restart till fault is rectified. (ad) The inverter should have provisions of Galvanic isolation, anti-islanding protection (IEEE 1547/UL 1741) equivalent IS and lightening. (ae) PCU must have the feature to work in tandem with other similar PCUs and be able to be successively switched ON and OFF automatically based on solar radiation variations during the day. (af) Minimum Warranty of Inverter- 12(Twelve) Years and defect liability period deemed to amended accordingly for the said item. 15 (G)ACDB : Outdoor type powder coated weather proof,vermin proof made out of CRCA sheet front open able door, lockingarrangement, including suitable working space in DCDB busbar chamber, cable box chamber including Copper busbar of designed capacity /bus raisers suitable capacities with PVC sleeves/tape RYB colour for phases identification, including all bus raiser shall be extend upto cable box chamber fixed on fibre insulation for RYB & neutral to all out going cable, confirming to IP-65 and fixed on wall / floor with control wiring with comprising cable gland brass, copper lugs etc. and comprising the following as per design :- (i) MCCB 4Pmicroprocessor based for outgoing (ii) MCCB 4Pmicroprocessor based for incoming (iii) AC type 2 Surge Protection Device (iv) Spreader Terminals as per requirement (v) Multifunction meter (vi) CT of suitable ratio(vii) Copper busbar chamber (ix) The earthing shall be of copper earth plate and having specification as per SSR Item Sr 19474).Earth resistance shall not be more than 3 Ohms. 16 (H) DCDB:- Outdoor type powder coated, weather proof, dust proof,vermin proof made out in CRCA sheet front open able door, looking arrangement, including suitable working space in DCDB busbar chamber,cable box chamber including copper bus raisers with PVC sleeves/ tape RYB coloursfor phase identification, including all bus raiser shall be extend upto cable box chamber, confirming to IP-65 and fixed on wall /floor with contral wiring with comprising cable gland brass, copper lugs etc. (i) MCCB as per requirement (ii) Fuse as per requirement (iii) Copper busbar chamber. (I) Weather Monitoring System Pyranometer : The pyranometer (ISO 9060 classification ) alongwith necessary assessories for measuring incidental solar radiation at horizontal and inclined plane of array. Specifications of the pyranometer shall be as follows :- (i) Spectral response : 031 to 2.8 micron,(ii) Time response (95%). Max 15 second 17 (iii)Nonlinearity + 0.5% (iv) Temperature response : - 2%(v) Tilt error <+/- 0.5% (vi)Zero offset themal radiation +7W/Sqm (vii) Zero offset temperature change + 2 W/Sqm(viii) Operating temperature range - O °C to 80°C(ix) Non stabillity Maximum - 0.8%,(x) Resolution minimum +/-1 W/Sqm (xi)Output Analog 4.50mA (xii) Digital RS 485(xiii) The earthing shall be of copper earth plate and having specification as per SSR Item Sr 19474).Earth resistance shall not be more than 3 Ohms. 18 (J)Balance of System(BOS) Items/ Components:TheBOSitems/componentsof theSPVpowerplants/systems deployed under this project shall conform to the latest edition with certificate of IEC or equivalent BIS Standards/MNRE specifications/ as specified in Para 1.01 of Minimal Technical Requirements/ Standards for SPV System/Plants to be deployed during this financial year under the programmes of MNRE available on MNRE website as on last date of quoting of tender. Notes:(i) The contractor must visit the site before quoting the rates for this item to assess the site condition so as to decide up on location and layout of SPV, placement of inverter, length of DC cables, lightning arresters, etc., complete. (ii) The contractor shall submit complete scheme including electrical diagram of the work, schematic diagram, SPV module layout, placement of LAs, Civil work, etc., complete as per IREDA/ SECI/NISE/MNRE/ALMM latest guidelines as applicable, Relevant IEC/IS norms to the GE for approval with in one month of date of commencement of the work. (iii) The rate quoted is deemed to be inclusive of the all protection system including surge, lightning arresters and necessary earthing all as specified and directed. 19 (K) Remote monitoring system (SCADA) for solar power plant complete with all electronic andelectricial partswith andincluding all necessary software and hardware etc to make fully functional connected to LED monitor (55 inches) with complete plant parameters as required and operate the system from remote and Other Accessories includingandThe system will be controlled from the main control room where all the data from different parts of the plant shallbe received, analyzed and action taken either manually or on auto as per the system design by OEM . The SCADA shallhave remote monitoring capability comprising with the following Items and with and including all connectedaccessories as per OEM recommendation complete:(a) Main SCADA control wall mounting panel complete with fixing arragnment like nut bolt, washers suitable size and connected items. (b) LED Moniter (55. inches) with mouse, key board, CPU (Minimum 1 TB storage alongwith 12 GB RAM, i7 processor), key pad and single phaseUPS 10 KVA with 12 Volt battery, 14400 Ah battery bank with rack and required battery backup should not be less than 4 Hrs inside control room.(c)“SCADA System shall be audited for Cyber Security by CERT certified firms at the time of commissioning. Subsequent cyber security audit shall be carried out after every 03 years and cost of audit and rectification shall be born by the contractor” 20 The Contractor shall provide following defined user access levels, unless otherwise instructed by the Engineer-in-Charge: -• Normal viewing only (default level) The default level shallpermit users to view al displays except those specifically assigned to a higher level of access.• Dally Access The daily access level shall allow viewing (ie default an printing at trend displays.• Operator Level (Remote Control) The operator level shall permit authorised users to access lower levels a and to carry out the following actions:- Perform control actions Acknowledge alarmsEnter or modify manually-entered data for inclusion in thereports.• Monthly and Yearly Data Archiving The level shall permit authorised users to access lower levels and shall provide the facility to download specific data to long ten data storage for archive purposes(d)The SCADA software shall be of a proven design and reliable, and conforming to industrial standards and shall: -• Support multiple makes of RTU/ Microprocessor controller/ transmitters and models and provide required software features needed to easily adapt a device whichshall not be supported as standard to the SCADA system. 21 • RTU/ PLC/ Microprocessor base controllers and transmitters shall have an expandable architecture and scalability to provide future capacity increases in SCADA system as well as meet present needs of the administration, provide multi-level security and password mechanisms to prevent use of the system by unauthorised persons. The access privilege of authorised users shall be defined separately and permission shall be provided to the users only to access areas concerning them, provide an on-line operatingenvironment.• Adding a new RTUI Microprocessor based Controller to the SCADA system or changing configuration of the existing RTUs/ Microprocessor based controller shall not result in stopping or hinder working order of SCADA system.• The Contractor shall specify maximum number of data which shall be achieved by the system without any performance loss. The Contractor shall conduct necessary tests to prove maximum number of data points achieved. The Contractor shall also be responsible to create additional data points necessary for conducting such tests. Any AutoCAD graphics shall be able to be converted to process diagrams and shall be re-loaded and operated after completion of all works and during tests.(e)The Contractor shall hand over to MES the SCADA and application software (as CDs or DVDs) necessary for re-loading software to the system in case of failures The CDs or DVDs shall be provided after making the necessary tests. The operating system ofrouters and work stations shall be of an architecture that provides a multi-tasking operating environment, and SCADA software shall also be multi-tasking. Therefore multiple tasks such as receiving measurement results from devices, displaying these results on computer screen. storing on a computer disk, sensing alarm conditions that may occur based on measurement results, and displaying them to users, generating reports from collected data, and printing them cut, transferring issued commands to Microprocessor controllers/ RTUs/ PLC, that SCADA software is supposed to execute shall be handled simultaneously without one task waiting for another. 22 To configureSCADA software or to change the system configuration, definitions shall be either defined directly by using a keyboard or another interactive tool or mechanisms that allow importing of configuration definitions from a text file created with a text editor. The database configuration shall be provided by means of an interactive program that contains menus or similar approaches and shall be easy to use The database configuration definition program, when required, shall be capable of extracting definitions related to the configuration from information created in text format to use as definitions for configuration The following shall be possible online without interruption or hindering of usual operations: -•Adding an RTU to the SCADA system.•Deleting an RTU from the SCADA system•Changing configuration information related to an existing RTU definition.•Modifying definitions in database containing information about measurement and control points.•Creating screen pictures which offer operators to monitor and control the SCADA system.•Similar configuration changes. 23 (f)SCADA software shall be upgradeable to new versions with an automatic mechanism to be provided by the Contractor. The old version of software shall be overwritten by new version without resulting in a change in any of the definitions created in previous version, nor disturbing the operational logic defined in previous version. Al! text being available on the screen shall be in English language The database shall be configured on-line when the SCADA system shall be in operation. The changes on existing definitions or new definitions related to database shall be made when the data collection n and control functions are being performed. The SCADA Software shall be operated using the database that shall be resident in the memory(g)Data Exchange The control system shall provide a method of real-time data exchange with different application programs like Geo Information System (GIS). relational database, third party spreadsheet packages, report generation and graphical simulation packages.(h) Historical Data Management An historical data management (HDM) system shall be provided for archive, storage and retrieval of operational data comprising field input data, manually-entered data and calculated points Archived historical data shall minimally include averages, minima and maxima for each analogue value compiled over hourly. daily and monthly time periods, with a minimum capacity of 1o00 points. The HDM system shall be capable of selectively increasing the rate of data capture based on events, such as process variable status, discrete inputs, or operator command. Minimum and-maximum data shall include the time and date of occurrence. Gaps in collected data caused by faulty instruments or control system equipment shall not be included in average). minimum and maximum compilations. 24 (j) Report GenerationThe system shall be provided with a report generator utility which shall enable authorised users to create, delete or modify report definitions The report definitions shall allow for retrieval of data from on-line database and farm historical data files and for formatting data for output to printer. The format of each report shall be definable by user to include the definition of static or background data, placement of data base values, number of significant digits of a value, date and time of report and calculated values(k)Graphic Display GenerationThe system shall be provided with an interactive on-screen graphic generation utility which shall allow an authorised user to create new graphic displays and modify or delete existing displays at any work station including those associated with the LCP/ outstations. The generation utility shall include an interactive linkage process allowing user to link symbolic, numeric and bar graph representations and data entry locations to dynamic data base variables. The graphic display system shall be capable of making full use of the VDU resolution in the composition and display of graphic information. Graphic symbols shall be definable by the user for display of static and dynamic data. The user shall be able to as5emble a library of symbols which shall be retrievable into any graphic display. Text and symbols shall be able to be enlarged, shrunk, moved, mirrored or related with reference to a given display. The system shall be able to represent dynamic analogue data on a graphic display as a variable-length, sizeable bar graph, as well as numeric text. 25 (l)DisplaysGeneral all displays, excepting those containing data derived from historical files, shall be completely displayed within two seconds of the operators request. Dynamic data shall be continuously updated while being displayed. All screen displays shall provide following displays which shall be fixed in their locations to normal operations:• Alarm banner window at bottom of the screen display showing last three highestpriority unaccepted alarms. Where the system allows contents of banner to be limited (eg by user name or group) then the selection criteria applied shall be displayed with the banner.• Main display area for user selected displays e.g. mimics, alarm lists, etc.• System dialogue banner window at bottom of the screen shall display relevant system information such as error message and user prompts 26 •A day, date and time indicator shall be able to show local time an alarm bannerarea shall be included on all displays which provide information regarding most resentalarm events. The system shall allow operator to obtain details of most recent alarm event from any operational screen display through direct operation using a maximum oftwo keystrokes or selections. The system shall allow the operator to obtain a print of any display, including graphics through use of a standard system command. Screen displays shall appear identical incorporated form Dynamic data contained on a display shall not change during screen print Such that a snapshot of conditions is portrayed. Each display shall include time of day in hoursminutes and seconds and date in day, month and year format.•A facility shall be provided which allows paging to related displays through the use of ‘page forward or backward keys, or through the use of pick points(m) Suitable size of HT & LT XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 11000 Volts and 1100 Volts grade with stranded aluminium / copper conductor of size as per OEM recommendation and approved design ISI markedincluding cable glands, lugs, jointing kit etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc.with all fixing & connecting accessories and necessary earthwork, civil work deemed to be included in quoted rates of the above items.(n)Generic Displays.The system shall produce various generic displays automatically 27 Metering arrangements: (A)Suitable bi-directional metering arrangements with recording facility shall be provided as per the norms of WBSEDCL. The metering arrangements must have feature to measure and record, (i)Parameters of KW, KWh, KVAR, voltage, current, PF and any other metering required to determine efficiency and efficacy of the system. (B) LT 3 Phase 4 Wire Electronic Tri vector Meter with CT ratioshould be as per capacity of SPV plant. (i) Standard: IS 13779:1999 / CBIP 88 (ii) Accuracy: Class 0.5 (ii) The metering arrangement shall have inbuilt Solar PV Plant synchronisation features. (iii) Reference Voltage - 3x240 V (iv) Basic Current (Ib)- 5 A (v) Maximum continuous current (Imax) - 10 A (vi) Rated Frequency (variation) - 50Hz (±5%) 28 (vii) Power consumption:- Voltage circuit: Less than 1.5 W and 10 VA per Phase at reference voltage, reference temperature and reference frequency Current circuit: Less than 1 VA per phase at basic current, reference frequency and reference temperature (viii) Display type: 8 digit 7 segment backlit LCD display, not less than10 mm character height (ix) Display in the event of Power Failure: Internal battery back-up for LCD display (x)Communication port: Galvanically isolated Optical Communication port for data transfer through either CMRI or remote device or both is providedwith RS 485 for DLMS protocol (C) CT/PT operatedenergy meter with following features (i) True four quadrant metering (iii) Time and day metering with maximum demand registration and automatic billing (iv) LCD display with announciators for various critical events (v) Scroll lock feature for continuous display of a desired parameter on display (vi) High resolution energy display mode for dial test (vii) DLMS protocol for meter reading, with option to remote reading port. 29 (viii) Advanced event detection features for voltage, current and magnetic influence (ix) Meter reading in absence of mains, using internal battery. (x)Power Manager Device Nano type with 4 inverter support with energy monitoring, zero export control, Load Management having RS-485 communication port, ethernet including RS 485 cable core size 0.5-1.5 Sqmm to establish communication between inverters, SCADA and sensor as per OEM recommendation with and including all connectedaccessoriesdeemed to be included quoted rates.(xi) Digital WIND SPEED SENSOR withminimum 3 cup Anemometer range 0 to 70 Mtr/ Sec distance constant 2.5 Mtrs output TTL Pulses output proportional to wind speed and diameter of cup 50mm with brass housing and stainless stell shaft(xii) WIND DIRECTIONSENSOR with wind vane and sensing vain coupledto linear endlsess potentio meter IP 67, range 0-357degrees, operating temperature -40 to +60 degrees celsiuswith brass housing and stainless stell shaft and aluminium vane complete 30 (xiii) AIR TEMPERATURE SENSOR withRTD sensing element PT100 mounted inside a weather shield duly coated with weather proof reflective white paint , range -40 degree to +60 degree celsius with nylon body housingwith weather shield and brass stem to mount the sensor, includingpower requirment 5 Volt DC complete. (xiv) MODULE TEMPERATURE SENSOR Model PT 1000 measuring range -40 Degreeto + 80 Degree Celcius with suitable ouput as required and directed on site and mounting on RTD encapsulated in suitable housing including connecting cables as required complete.(xv)Tipping Bucket Rain Gauge with Magnet and Red Switch type Sensing, rim diameter 203 mm and collecting are 335 MM SQ, Rain gauge shell made up of FRP bucket and mounting made up of stainless steel SS316 and unlimted capacity,including connecting cables as required complete.(xvi)SOLAR Radition Sensor ARN 8101 with 72 element thermo pile sensor and spectral range 0.3 to 3 Micro Mtrs and sensitivity 20 Micro Volt/ W/M², range 0 to 1500W/SQM & output 0 to 25 milli Volt and operating temp -10 to 70 Degree Celsiusincluding connecting cables as required complete with all fixing arrangment and necessary civil work complete with including all connectedaccessories as per OEM recommendation/Designcomplete: 31 (L)Step up solar transformer (800 volt/11 KV)” - Design,procure,erection, installation, testing and commisioning including connecting to local utility grid :Oil filled Type 3 phase, 50 Hz, ONAN cooling type, vector group of appropriatetype, number of load voltage Ratio: number of Phases / Freq.: 3 Phase / 50 Hz., Sealed type Copper wound Transformer with Off Load Tap Changing Arrangement on HV side in steps of 2.5% , +5% to -10% having cable end boxes on HV side suitable for 3 Crore X 300 Sq. mm. XLPE cable of 11 kV grade on HT side and LV side complete with all accessories like buchholz relay, Oil temperature indication, winding temperature indication and alarm etc preferbly DMCR Protection Relay i/c first filling of filtered dehydrated K Class natural Ester Oil bioTransol (as per IS 16659) and confirming to IS 1180 and losses shall be as energyefficiency Level 3 only & 100% load phase, with an impedence of 6.25% i/c as per specification below complete in all respects as required at site. Design ambient to be considered as 50 Deg C.All the balance parameter like temp rise, Basic insulation level, flux density etc shall be strictly in accordance with IS 1180 Part - 1 only including necessary earth work, PCC plinth foundation etc.Heat Run Test is the mandotary test for each Transformer.Standard: The equipment shall conform to the latest edition of applicable standards as follows. In case of conflict between applicable standards and this specification, this specification shall govern.• IS 2026 Standard for Oil filled Transformer• IS:3639 for Fittings and Accessories• IS:2099 for Bushings > 1000 V• IS:7421 for Bushings < 1000 V• IS:1271 for Electrical Insulation classified by Thermal stability• IEC 62770 Natural Ester Oil• CBIP Guidelines 32 (xvii) CORE : Transformer shall be double wound, core type with low loss, non-ageing, high permeability PRIMEGRADE, CRGO with M4 Grade or Better, perfectly insulated and clamped to minimize noise and vibrations. Followings should be Mandatory for any manufacturer: -(a) Transformer shall be of BOLTLESS core design.(b) Core shall be purchased Directly from Manufacturer or from their accreditedMarketingorganization of Repute & not through any agent. Bidder has to submit manufacturer’s name during bidding having sufficient credential & Core has to be purchased from the approved manufacturer.(c) Stage inspection of the core shall be done at manufacturer’s premises & inspection call shall be given with following Documents: (i) Invoice of the supplier (ii) Mill’s test certificate (iii) Packing list (iv) Bill of landing & Bill of Entry certificate by customs(d) Transformer manufacturer should have in-house core cutting facilities for proper control & monitoring of quality & to avoid mixing of Prime core with Second grade /defective core materials. Transformer Manufacturer should have in-house slitting Machine so that core is cut to width & stacked with minimum air gap thus ensuring Burr level less than 10Microns.(e) Core shall be procured from one of these reputed Manufacturers : Posco / Nippon/ Novex/ Ak Steels.(f) The insulation structure for the core to bolts and core to clamp plates shall be such as to withstand a voltage of 2000V for one minute. 33 (xviii)Tank:Tank should be of corrugated wall construction type. The exterior of tank and other steel surfaces exposed to the weather shall be thoroughly cleaned and have a priming coat of zinc chromate applied. The second coat shall be of an oil and weather-resistant nature, preferably of distinct colour from the prime and finish coats. The final coat shall be of a flossy, oil and weather resisting non-fading paint of specified shade. The interior of the tank shall be cleaned by shot blasting and painting with two coats of heat resistant and oil insoluble paint.Winding:(a) Winding shall be made with 99.9% pure electrolytic grade copper, insulated with thermally upgraded paper (Insulation Class A / Conductor Turn Insulation-Class E).The HV & LV winding should be able withstand thermal and mechanical stress in the event of short circuit.(b)Winding shall be carried in dust free area(c) The completed core and coil assembly shall be dried in vacuum and shall be immediately impregnated with oil after the drying process to ensure elimination of air and moisture within the insulation.Oil type: TransformerTransformer oil shall be as per IS-335:1993. It shall be natural/synthetic ester oil. The material safety Data Sheets (MSDS) for the Transformer oil shall be submitted by the bidder along with the offer Temperature Indicator:One set of winding temperature indicators with necessary current transformer, heating coil and a detector element and one set of oil temperature indicator with maximum reading pointer shall be mounted locally so as to be readable at a standing height from ground level. Each of the above indicators shall be provided with necessary contacts for alarm and trip: (a) Oil Insulation class : K class. It should also exhibit safety against fire hazards 34 (b) Cooling : ONAN(c) Vector Group: to be decided during design.(d) Percentage Impedance (Z%) 6.25 %.(e) Transformer Losses:as per IS 1180 - Level 1(2021)(f) Taps on HV for HV variation : +5 to -10 % in steps of 2.5% each (g) Termination (HV): Cable End box for11 KV cableof suitable size(h) Termination (LV): Cable connection(j) The transformer shall be supplied with following fittings:(k) Lifting lugs and Jack lifting pad support(l) Earthing terminals - to be decided during design. 35 (M)Earthing :The complete system shall include chemical earthing of required quantity for step-up Transformer (as per OEM recommendations) and earth strip/cable etc for earth of SPV module, array, inverter,DC & AC boxes and for LA etc as per latest IS/MNRE/IREDA/NISE/SECI/ALMM specifications and guidelines.No separate cost of the same is included in the schedule and amount will be paid to the contractor on this account in case of any dispute decision of Engr in charge will be final and binding to contractor. (The earthing shall be of copper earth plate and having specification as per SSR Item Sr 19474).Earth resistance shall not be more than 3 Ohms. 36 IMPORTANT NOTE FOR SOLAR POWER PLANT CONTRACT (COST DEEMED TO BE INCLUDED IN QUOTED RATES :-(1) The item specification and details given are for guidance purposes only and are likely to vary with modified / higher specification than that specified in the BoQ based on detailed site survey, solar potential assessment, design approval etc keeping the quantity of Solar inverter (PCU) and Solar Transformer same as in the BoQ. The items as per the finalized and approved design and specification, including make, shall be provided by the contractor without any extra cost to the department. All makes should be as per the latest MNRE approved list of makes and models.2.Cost of preparation of DPR design vetting from NISE/MNRE approved Institute and net billing arrangement (as per WBSEDCL) is deemed to be included in the quoted rate.3.The contractor shall submit complete design of Solar power plant, Schemetic/line drawings, detailed mounting structure array layout drawings alongwith SBC report based on the soil investigation as per OEM recommendation, Single line diagram with and including project reportand connected document shall be submitted by OEM through contractor prior to commencement of the work for approval of Accepting officer and subject to the drawing and designduly vetted by IIT/NIT (for mounting structure only) and vetted by NISE/ SECIfor entire scheme of Solar Power GenerationProject including evacuation and Net Metering arrangement complete before recommendation by GE for approval of the accepting Officer. 37 (i) The scope of works involves engineering, procurement & construction (EPC) of entire Solar Power Plant of capacity 0.8 MWp.4. The entire work shall be executed directly by OEMonly through contractor and contractor has to submit the MoU with OEM (agreement period for 25 years of entire Solar Power Plant Project) prior to commencement of work and same shall be approved byGE. 5. Boring of holes under road, pavement, hard standing by trenchless technology (HDD) GI protection pipe up to 100 mm bore (dia), maximum 2.5 metre below of apron areain any type of soilcomplete.Note : (i) All the precaution to be taken by the contractor before drilling the bore. The contractor has to take plan of existing cables any type and pipe line in existing area before drilling the bore. (ii) Any damage to existing cables any type and pipe line in the way of drilling the bore have to berepaired and made good by the contractor within 24 hours. No extra cost will be paid in this account. (iii) Contractor has to get the survey of route, length and depth for boring before quoting the rate. (iv) Connected items like HDPE/PPR/DWCPE pipes for entire Solar Power Plant Project, exavation, removing, return filing, channel, any type of metal work is deemed to be included in the quoted rate. 38 6.Cost of comprehensive maintenance as per OEM recommendation alongwith cost of spare parts required during 5 years of defect liabilty period after completion of Ph-I is deemed to be included in the quoted rate.7. Bidders attention is drawn to pre-bid conferance with department and also visit the site prior to bidding and other factor required as per OEM recommendation deemed to be included in quoted rates.8. The contractor has to carryout Pre-commissioning test of solar power plant including stepup transformer by CEI/SEI. The necessary tools and plants required for inspection of the plant shall be arranged by the contractor.and costsare inclusive in quoted rates.9. Contractor needs to know the irradiance of the location at the project before quoting. The contractor will design DCR (Make in India) for entire Solar Power Plant according to irradiance of the project location and efficiency of the components to produce the desired peak value as mentioned in the schedule i.e. 800 KW output on 11 KV AC supply and inject to the proposed RMU 11 KV. 10. During the execution of work any type of damage by elephant or monkey manance, contractor is fully responsible for protection of all solar power plant equipments including connected items i.e. PV Module, Inverter etc. No claim will be sought from the department. 39 11. All SCADA related activities viz. cables till SMBS and inverter and the requisite software and hardwarefor control room shall be included in the quoted rate.12. Vegetation Growth should be controlled by use of Deweeding Chemicals deemed to be included in Quoted Rates.13. Adequate Water Storage Facility of capacity 10000 Ltrs PVC Tank 5 Layer (with guarantee of 10 years after physical completion of work) on PCC Platform including suitable foundation for cleaning of PV Modules and suitable water drainage facilitiesfor both (Rain Water and Cleaning Water) from proposed site to existing drainage chamber is deemed to be included in the quoted rate.14. Solar Transformer fed from the Inverter should not be having odd harmonics (certificate needs to be required before physical completion of work).15.The Shutdown duration of Inverter should be monitored and recorded and analyzed. 40 16. The SPV Power Plant will be capable of generating 800 kW AC Output atleast once in a year and the AC Output of the plant will be not less than 90% of initial output by the end of 10 yearsand not less than 80% of the initial output by the end of 25 years.17. The Contractor shall operate and maintain Fire Protection System and safety equipments for the entire Solar Power Plant for 10 Years and cost of the spare is deemed to be included in the quoted rates.18.The firefighting system for the proposed power plant for fire protection shall be consisting of:a) Portable fire extinguishers in the control room for fire caused by electrical short circuitsb) Sand buckets in the control roomc) The installation of Fire Extinguishers should conform to TAC regulations and BIS standards. The fire extinguishers shall be provided for control room housing, PV array installation.19.Solar Components shall not be connected to LAN, WAN, or any Internal Data/OPS nw. 41 20.Sys with Bluetooth, GSM, Wi-Fi, or any Telemetry features should be avoided, unless explicitly cleared monitored.21. Finalization Of Feasibility Report, Design, Engineering, Transportation, Storage, Insurance, Civil Works, Erection, Testing & Commissioning etc., ensuring net-billing as per state net billing policy, quality control of grid connected.22.The Comprehensive Maintenance of SPV Plant would include wear, tear, overhauling, machine breakdown, insurance and replacement of defective modules, Inverters/PCU, spares, consumables & other partsas pe OEM reocmmendation and specification for 5 (Five) years under DLP of Phase-I..23.The Contractor shall arrange technical vetting of the plant during execution by the Cyber/INT officer and training by Unit Technical Pers till defect liability stage of Phase-I. 42 24.a) An energy meter (for net-billing) shall be installed between the solar Grid-tied inverter and the building distribution board to measure gross solar AC energy production (the Solar Generation Meter). The Solar Generation Meter shall be of the same accuracy class as the DISCOM service connection meter or as specified by local regulatory requirements. Separate for two different buildings.b) The bidder must take approval/NOC from the Concerned DISCOM for the connectivity, technical feasibility, and synchronization of SPV plant (if required).c) Contractor shall be provided system software (Cloud) for data hosting of Solar Power Plant with the Government approved agency and also audited by CERT-In (Computer Emergency respose team-India) is deemed to be included in the quoted rates. 25.a) Two sets of Engineering, electrical drawings, and Installation and O&M manuals are to be supplied. Bidders shall provide complete technical datasheets for each equipment giving details of the specifications along with make/makes in their bid along with the basic design of the power plant and power evacuation, synchronization, along with protection equipment is deemed to be included in the quoted rates. 43 b) All test and calibration certificates, wherever applicable.26. The bidder shall take entire responsibility for the electrical safety of the installation(s) and personnel, including connectivity with the grid and follow all the safety rules & regulations applicable as per local guidelines and regulations, etc. Insurance of the installers (of the vendor) working abroad is mandatory.27. (a) The bidder shall take entire responsibility for the electrical safety of the installation(s) and personnel, including connectivity with the grid and follow all the safety rules & regulations applicable as per local guidelines and regulations, etc. Insurance of the installers (of the vendor) working abroad is mandatory.(b) The contractor will carry out fortnightly, monthly, quarterly and annual maintenance as per Proforma of Appendix here-in-after respectively. In case the contractor fails to carry out the above maintenance following penalty per Solar will be imposed. 44 (i) Not carrying out maintenance fortnightly- Rs 2500.00(ii) Not carrying out maintenance Monthly- Rs 5000.00(iii) Not carrying out maintenance quarterly- Rs 7000.00(iv) Not carrying out maintenance annually - Rs 10000.00(c) The Contractor shall be responsible for ensuring production of 800 kW AC output of electricity at the injection point of RMU atleast once in a year from the SPV plant. In case the output is less than 800 kW AC unit, it will be deemed as under-designed plant. The contractor will be responsible for making good the shortfall by repair / replacement of the SPV Plant free of cost. Delay in this regard will attract monetary penalty to be amounted for the period wef very next day of the completion of Phase-I to the date of completion of rectification / replacement by multiplying the maximum value of units less generated than 800 kW AC for every day with the prevailing rate of electricity tariff of WBSEDCL Rate of electricity in West Bengal is Rs 6.52 per unit as in Sep 2025.(d) Maintenance and supervision shall be done by trained men for the safe operation of Solar’s contractor shall carry out fortnightly servicing including adjustment lubrication, repair of replacement fo parts if necessary. In addition to fortnightly servicing contractor’s senior mechanic of foreman shall carryout the inspection as per maintenance schedule and make necessary entries in the proforma attached here-in-after duly signed by Contractor & Engg-in-Charge as applicable kept in the switch room for this purpose. It will be the responsibility of the contractor to see that the maintenance schedule book is maintained properly by their senior mechanic or foreman. They shall promptly attend and call back & shall not be kept pending for more than 4 hours unless it has the prior approval of the Garrison Engineer. 45 (e) For any repairs/ replacement of Solar the contractor shall always be aware of time factor following are the fixed time (including Sunday/Holiday) for repair/replacement of parts/components/ accessories which shall be adhered to :- (i) Minor repair/ replacement- 4 hours (ii) Major repair/ replacement - 1day(f) The decision of the GE regarding Minor/Major repair shall be final conclusive and binding. In case of failure on the part of the contractor to keep the solar’s in running condition within the stipulated period mentioned in above the contractor is to pay penalty charges as mentioned below subject maximum of 10% of the total contract value and after that measurement will not be considered for the same defective Solar till it is in satisfactory working condition :-(i)Upto 12 hours @ 2000/-(ii) Above 12 Hours and up to 24 hours @ 5000/-.28. RFID Tag scanner of reputed make shall be provided by the contractor is deemed to be included in the quoted rates.29. Existing Room at 33 KV Switch Yard shall be used for SCADA/ Solar equipment/Control Room. 46 30. Surface preparation and laying of light yellow/white coloured interlocking tiles of appropriate thickness under the whole area of PV module array to make a reflecting surface for bifacial Solar PV module alongwith periodical water sprinkling arrangement for cooling of interlocking tiles is deemed to be included in the quoted rates. 31.The complete system shall include chemical earthing (as per OEM recommendations) and earth strip/cable etc for earth of SPV module, array, inverter,DC & AC boxes /LA etc as per latest IS/MNRE/IREDA/NISE/SECI/ALMM specifications and guidelines is deemed to be included in the quoted rates. Earth resistance shall not be more than 3 Ohms .32. The mounting steel structure shall be as per IS 2061-1992 and galvanizing as per IS 4759 and should withstand WIND Load as per relevant IS Code/NBC.33.Soil Stabliztion testing certificate needs to be required before completion of physical completion of work (Phase-I) so that the performance of the PV Plant is not affected in Highly Soiled areas for minimum 25 years. 47 34. M&O (Phase-II) should be finalize at the planning stage itself. The important point are as under:- (a) The thermal imaging of pv panel should be taken once a year for checking its health including hot spots.(b) The cleaning cycle of panel should be fixed as per the ratio of short circuit current falling below 0.9. The cleaning provision shoul be made available before evacuating the power.(c) The shutdown duration of inverter should be monitored and recorded and analyzed 48 Supplying, Installation, Testing & Commissioning including design, manufacture and testing at works of indoor type , IP 4X ,floor mounted metal clad, 11 KV VCB panel board totally enclosed & fully interlocked, Horizontal drawout, Horizontal isolation type breaker as per IEC-62271-100/200, as amended up to date and additional specifications, having capacities as mentioned below, single break, trip free mechanism, motor charged and manually/electrically closing breaker suitable for use on 11 KV,3 Phase, 50Hz A.C. supply with STC 25 KA for 3 Sec.Internal Arc for AFLR 25kA at rated voltage for 0.1s at individual compartments i.e. Busbar, VCB and cable compartment.complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated and encapsulated copper bus bars of 800 Amps capacity, breaker featured with mechanical ON/OFF indicator with hand trip device, spring release coil, shunt trip coil and auxiliary switch of 8 NO + 8 NC andequipped with following switch gears and accessories.The panel shall be complete with following switchgear and accessories. The structure of the switchgear must be fabricated using steel sheets coatedwith Alu-Zinc (Aluminium Zinc alloy)/PRINTED CRCA All major sub-components (switchgear, relays, meter & vacuum interrupters) shall be of same make. VCB and vacuum interrupters shall be designed for 100 short circuit operations at full short circuit of 25KA. Breaker shall be roll on floor type/ CASSET TYPE. Separate earthing truck shall be required for each bus earthing & cable earthing. Earthing truck shall be so designed that it is impossible to earth a live. It shall be provided with capacitive voltage divider and complete with audio visual annunciation, one for each panel. Item Continued as 2.01 to 2.04 49 INCOMINGS & Outgoing VCBs :Type : Air insulated VCB, autoreclosing, system voltage :- 11kV + 5%, 50 Hz+ 5%, 3 phase, rated voltage : 12kV, rated current : 800A in 40 ° C ambient, Short time rating for 3 sec : 26.3 kA, Short Circuit Making Current : 65 kA, insulation level (PF rms/ impulse peak) : 35 kA/75kA, System Ground : Solidly Earthed,Duty Cycle : 0 - 0.3 sec - CO - 3 min - CO, Break/ Make time :- Not more than 5 Cycle, Range for Auxiliary voltage for Closing / Tripping / Spring Charging : 85-110%/ 70-110%/85-110%. of rated voltage. The VCB must withstand 10000 mechanical, & 100 at rated short circuit current. The breakers should have auxiliary contact 6 No+ 6 NC, in minimum. The used Breakers will comply with IEC 62271/ IS 13118. Qty. - 3 Nos (1 no Incomer & 1 outgoings)Busbar: Rated Current : 800A @ 40°C ambient, Material : Silver Plated /Tined , High conductivity elecrolytic Copper Bus Bar sleeve :Heat Shrinkable PVC Sleeve with joints having full voltage soft PVC shroude Short time rating for 1sec :26.3kA -1 setCurrent Transformer:Voltage class: As specified in Circuit breaker ; Type: cast resin type, Dual core, Dual Ratio , Barden :10VA; Class insulation : Class E or better . Protection core: 5P10, Metering : 1.0 , Short time rating for 1 sec :26.3kA Ratio :300-150/1-1, 7 setsBus Potential Transformer: Rated Voltage : Primary - 11000 / ✓3 , Sec -110✓3; Type : Cast resin , draw out type, 3- phase , 3-limb complete with HV fuses . Barden : 100VA per phase ; Class of insulation : Class F or Better , Accuracy Class: 1.0;Rated Voltage factor : 1.2 continuous, 1.5 for 30 Secs. PT shouldbe drawnout type and serivce continuously shall be indepandent of Breaker trolly position...1set 50 Relay for Control & Protection: Numerical Type IDMT Relay (50/51, 50N/5IN) with two elements for overcurrent and earth fault having settings 50% to 200% for overcurrent and 20% to 80% for earth fault in equal steps with time and current settings and high set instantaneous unit. Additionally, condition monitoring CB wear, condition monitoring CT supervision, disturbance recorder, undervoltage & over voltage protection, trip circuit supervisioncan be measured through the relay. The device shall support webserver/web HMI through which we can monitor and control the relays over a ethernet Lan network. Licenses for theprogramming software shall be provided free of cost.The numerical relay shall have large mimic-based LCD screen display . .The relay shall have 8 Digital inputs and 8 Digital Outputs and one additional watchdog ouput.The device has to aloe controlling of min. six objects (circuit breakers, disconnectors and grounding switches). Controlling has to be done by “select-execute” or “direct control” principle. Controlling has to be possible by: through local HMI, remote communication, via digital input or via function key. Events has to be readable to SCADA systems, front panel or by setting software.The sample rate of the recording has to settable to 32samples/cycle.The devices shall provide storage up to events 2000 based on the resolution.The device shall support following communication protocols: Native IEC 61850 ed1 & ed2, Modbus TCP. The IEC 61850 communication has to support peer to peer communication (GOOSE) if requiredThe IEC 61850 interface must be able to configure through setting software. Also the same setting software has to be able to generate ICD filesThe device shall have KEMA IEC61850 edition 2 certificates - 3 sets. High Speed Master Trip relay VAX31- 3 Set, Ttrip circuit supervision relay-VAJH13-3 set6 Window Annunciation Facia . with ACCEPT, RESET & TEST Push Button - 3 set . Auxillary relay for Transmission faults (VAA33)- - 3 Set 51 Metering: Meters: 1-NosUL&CE Multifunction Digital meter displaying Voltage, Amps, kWh, kW, P.F., Active, reactive, apparent energy , disturbance direction detection, Individual harmonic up to the 63rd harmonic. at least 256 samples/cyclewith ethernet Port with inbuilt webserver and complying to IEC 61557-12, IEC 62053-22 certified by third party laboratory.Temperature Monitoring Sensor for the Three Phases of Incomer VCB Panel :Supply, installation, testing & commissioning ofthermal monitoring system to be provided to detect abnormal temperatures due to faulty connections and to prevent equipment B19damage. The switchgear shall have wireless temperature measurement sensors at all critical points:(a) 3 nos. foreach phase at incoming side cable joints The wireless temperature sensors installed on conductors shall be :(i) Installed with direct contact to hot point, to achieve accuracy of +/- 2°C(ii) Self-power (no auxiliary supply, no battery)(a) communicate wirelessly(c) Operate from -25°C to 125 °CThe system shall allow 2 configurable thresholds (pre-alarm and alarm). This system shall have integrated algorithms enabling to anticipate as early as possible an abnormal temperature, before damage occur (strong predictive capacity) and generate alarm through SCADA/monitoring software. Thermal sensor shall beself powered by the network current. Temperature data is sent via Zigbee wireless communication to provide high performance and accurate thermal monitoring. The sensor is secured to the connection point and is in direct contact with the measured point. Smartphones or tablets (with a Zigbee communication dongle) can be used with our Thermal Connect mobile application to scan data locally and can replace the need of periodic infrared scanning. Thermal sensors should comply to following standards:1 EN/IEC 61010,2010 2. UL 61010-12, 20123. ETSI EN 300238, 2012 V1.0.1 4. IEEE 802.15.4, 2013 52 Power Pack shall be with 220Volt AC Input & 24 volt DC continuous output suitable for closing /tripping indication of HT panel boards with 2nos 12Volt 100AH maintenance free batteries, chatging unit for trip system complete with suitable capacity dogital MFM connections with 2.5sq mm FRLS inaulated copper conductor cable etc as required.-4 set.The 11 KV HT Switchboard of 1 panel,shall bewith all accessories, interconnections,internal wiring, labels, space heaters etc. complete as required.3 panels shall be mechanically interlocked in such a way that only one operates at a time and multifunctional digital meters shall be interconnected and programmed in such a way that total consumption will come in one meter summating both of them.Note: 1. Quotated rates shall be inclusive of construction of foundation for the installation of VCB as per OEM drawing.2. The equipment shall be tested by SEI post sucessful installtion and report shall be submitted to this office. 53 Design, Manufacturing, Supply, Installation, Testing and Commissioning of 3 way 12 kV rated Ring Main Unit ofwith Fault Level 21KA 3 sec internal ARC 1 sec for tank and cable box , consisiting of 630A12 kV rated , 2 nos motorized type VCB as incomers & 1 load break switch as outgoings with metering modules along with necessary Earth Switches,battery and battery charger for shunt trip arrangement andMotor and other auxiliary circuit operation, HT CopperBus bar with current density not more than 1.6A/sq. mm as per detailed description as follows: RMU Construction: The switchgear and busbar shall all be contained in a stainless steel enclosure filled with SF6 at 0.3 bar (300 hPa) relative pressure to ensure the insulation and breaking functions. Sealed for life, the enclosure shall meet the sealed pressure system criterion in accordance with the IEC 62271-1 standard (§ 3.6.5.4): a volume for which no further gas processing is required during its entire expected life”. In addition, manufacturer shall confirm that maximum leakage rate is lower than 0,1 % / year. It shall provide full insulation, making the switchgear insensitive to the environment (temporary flooding, high humidity...), IP67 degrees of protection in accordance with recommendation IEC 60529 § 14.2.7. No SF6 gas handling required at site. Thus assembled, the active parts of the switchgear shall be maintenance-free and the switchboard shall be low-maintenance. The switchgear operating mechanism shall have an IP2X protection and cable chamber shall be IP55, Over all IP protection shall be IP55 . The tank shall be made of at least 2mm unpainted stainless steel. Item Continued as 3.01 to 3.05 54 VCB is the preferred dielectric medium for MV RMUs. Oil filled switchgear will not be considered. RMU shall be in accordance with IEC 60376.Any accidental overpressure inside the sealed chamber will be limited by the opening of a pressure limiting device in the lower part of the enclosure. Gas will be released to the rear or the bottom of the switchboard away from the operator and internal arc tested for both cable and tank for 21KA 1sec AFLR with test conducted with minimum 3 functions TankNumber of mechanical operations of Circuit breaker 2000 O/C , Number of electrical operations at full loop current for LBS: 100 O/C , Number of electrical operations at full loop current for CB: 2000 O/C,. Manufacturer shall provide type test report to prove compliance with IEC 62271-200 Annex A, Internal arc classification class AFL with 21kA 1s for the enclosure. Make of the RMU, vaccum intrtupter , relay & meter shall be of same OEM. All the test certificate shall be in the name of the OEM only . If there is any name change / acquisition by other OEM happened for the RMU then test cerificates shall contain the new OEM name only.HT System : 3 phase -3 wire , HT Fault level21 kA, Power System earthing - solindly earthed at up stream source, HT Copper Bus with Short Time Curent rating 21 kA for 1 Sec ( 3Sec), Continuous current rating at least 630 A. tank and cable chamberof RMU must be IAC rated for 21 kA for 1 Sec AFLR. Design ambient to be considered as 40 Deg C.HT Circuit Breaker :(i) There shall be 1nos.load break switches as incomings and 2 nos 12 kV rated VCBas outgoing ( total 3 nos.) . The circuit breakers shall be fixed type. All of the switchgear shall be capable of withstanding this current without any damage being caused, in accordance with the recommendations IEC 62271-1 and IEC 62271-200.Loss of service continuity class: LSC2(ii) The Circuit Breaker must be rated for 12 kV ( nominal Voltage), 28 kV/75 kVp ,3 Phase, 50 Hz, Short Circuit Fault Level of 21 kA for 3 sec. 55 (iii) No. Of Close Coils - 01 no. operable at 24 V DC (85% - 110%)/ Spring Assited Closing, No. of Trip Coils - 01 nos. ,operabale at 24 V DC ( 70% - 110%) for shunt trip.(iv) Provision for supervision of the shunt Trip Circuits for the Trip Coils to be provided. (v)Switchgear classification: PM class(vi) Loss of service continuity class: LSC2(vii) Duty Cycle : O – 3min – CO – 3min – CO, Vacuum Circuit breaker shall be of M1, E2, C1 duty and capable for minimum 50 short circuit breaking operation at full short circuit level.(viii) STC rating 21 kA for 3 Sec (for Vacuum Interrupter).(ix)Vacuum Interruptor must be hermetically sealed and must comply IEC 60056 ( along with latest amendments). Vaccum interrupter shall be of same make as RMU(x)Circuit Breaker to be equipped with Suitable tripping arrangement with push button, Mechanical counter to assess the total number of operations of the breaker, Mechanical ON / OFF indicator, Auxiliary switches, Auxiliary Contacts( at least 2 NO + 2 NC of Class 2 category), Emergency trip push button.(xi) The Operating mechanism shall be spring charged motor operated/ spring assisted as per OEM type tested design type with Spring Charge Universal motor operable on 24 V DC / 230 V AC.(xii)Suitable monitoring of Bircuit Breaker status ( ON, OFF, Trip, CB Spring charged if applicable), Trip Circuit Healthy / Unhealthy, DC healthy/unhealthyto be provided using (xiii) Voltage Presence Indicator shall be provided against each HT circuit ( against each VCB) on line side for knowing the presence of line enerzisation status.(xiv)Number of Mechanical operations at full rated current for breaker: 2000 O/C 56 HT CT /PT : Load Break Switch - 11 KV, 630A, 21KA for 3sec Motorized Load break switch; with built in line side manual earth switch. Earthing should be completed within 2 operations only(i.e 1. Main switch - OFF, 2. Earth switch - ON). LBS shall have 3 positions, open or disconnected, closed and earthed, and will be constructed in such a way that interlocking prevents unauthorized operations. For earth switch, manual opening and closing will be driven by a fast-acting /snap action mechanism, independent of operator action. LBS and earth switch shall have a min of 1000 (M1) mechanical operations ,and 5 nos closing operations at rated SC current. LBS should have 100 electrical operations at rated current. LBS & Earth Switch should have separate apertures for operation.i) One set of 03 nos. ( for 3 phases) dual core Cast Resin CTs for Eachincomer VCBcomplying with IEC:60185 & IS 2705 ( along with latest amendments) , Core -1 - 400-200/1 A , 2.5 VA, Cl 0.5 for metering ; Core-2 - 400-200/1 A, 2.5 VA , 5P10 for Protection.ii) 01 no. of 03 phase Dual Core PT forHT bus ( 11 kV)with protection HRC fuseCore 1- 11kV /√3 / 110V/√3, Cl 0.5s, 50VACore 2- 11kV /√3 / 110V/3, Cl 3P, 50VA(iii) Multifunction Meter:2 Nos. 3 phaseDigital Multifunction Meter6400NGwith Voltage, Amps, kWh, kW, P.F., Active, reactive, apparent energy , disturbance direction detection, Individual harmonic up to the 63rd harmonic. at least 256 samples/cyclewith ethernet Port with inbuilt webserver and complying to IEC 61557-12, IEC 62053-22 certified by third party laboratory.for each VCB panel ( 96 mm x 96 mm) , Flush mounted, Class 1 conforming to IEC 62053-22 ( along with latest amendments). 57 Protection Relay: (i) 2 Nos. of Numerical Type Self-powered IDMT Relay(50/51, 50N/5IN) with two elements for overcurrent and earth fault having settings 50% to 200% for overcurrent and 20% to 80% for earth fault in equal steps with time and current settings and high set instantaneous unit. Relay should communicate on Modbus RS-485.(ii) Each VCB must have separate Anti Pumping Relay / Antipumping feature through motorization circuit.Fault Passageindicator: The FPI shall facilitate quick detection of faulty section of line. The fault indication may be on the basis of monitoring fault current flow through the device. The FPI should be self-powered and should have internal lithium battery for external indication and setting of FPI in the absence of current.The FPIs shall include: Fault detection - Phase to phase and Phase to earth faults.One potential- free output contacts for hardwiring to RTUs. On this basis, the SCADA/DMS will be able to monitor phase / earth fault condition.Local fault indications - LCD display on FPI front panel along with LED indication on front panel of RMU enclosure.Multiple reset option : End of time delay (Adjustable from 2 to 16 Hrs)Remote reset (Via potential free input contact of FPI)Manual reset (Reset button on front panel of FPI)Automatic reset on current restoration.The characteristics of the FPIs shall include: Phase fault thresholds configurable from at least 100 to 800 A,Earth fault thresholds configurable from at least 20 to 200 AMultiple number of steps for adjusting phase and earth fault thresholds. Fault current duration range configurable from at least 40 ms to 100 ms in 20 ms steps and further 100 ms to 300 ms in 50 ms steps. Variations with respect to these characteristics may be acceptable as long as they prove applicable and provide the same or better flexibility. 58 EARTHING : The cables shall be earthed by an earthing switch with short-circuit making capacity, in compliance with IEC 62271-102 standard. The earthing switch can only be operated when the switch is open. The switch and earthing switch operating mechanism shall have a mechanical endurance of at least 1000 operations. Integrated line side Earth switches shall be provided in each HT Circuit. ( against each VCB)RMU Bushing & Cable Termination: It is preferable to have all bushings accessible from the front of the RMU. Bushings along the sides or the rear of the RMU are not acceptable.For each cable compartment, the bushing shall be at the same height in order to facilitate a possible reversal of the cables. The bushing should be conveniently located for working with cables specified and allow for the termination of these cables: - 630 A M16 bolted connectors for switch-disconnectors and vacuum circuit breakers functions.The profiles of the cable connection bushings shall be in compliance with IEC-60137 standard. Cable clamps:A cable clamp arrangement must be provided for all network cables terminated on the RMU.Provision for Cable Entry: There shall be suitable provsion for Cable entry from bottom through 3 mm thick CRCA steel thick detachable gland plate along with provision for termination of 2 runs of 3 c X 300 Sq mm 11 kV (E ) , XLPE insulated Aluminium Cables (for HT side) and at LT side runs of cables matching with outgoing MCCB current rating.Note: (i) Quotated rates shall be inclusive of foundation for the installation of VCB as per OEM drawing.(ii) The equipment shall be tested by SEIaftersuccessful installtion and report shall be submitted to this office and cost deemed to inclusive in qoated rates 59 M&L for water proof, 3 core PVC insulated and PVC sheathed, copper conductor cable of size 1.5 sqmm, 1100 Volts grade including PVC conduits properly fixed on steel poles using GI wire for electrical connection of street light fittings, complete all as specified and directed. 60 Supply and fixing junction box having protection dust proof, acid resistant, shock proof, fire retardent self extinguisher for outside installation with knockout entry for cable of size 10 - 25 sqmm andminimum size 295x195x95 mm with terminals, with and includingbrackets for street light pole mounting andone 6A MCB SP complete all as specified and directed. 61 M&L for Advanceencapsulated compound based Chemical earthing CPRI tesed maintenance free , pipein -pipe technology upgraded(Zinc & Alloy coated). , Zinc & Alloy coated (80 -100) microns with pure zinc (99.9%) & Alloy coating (200-250) microns. Earthing system conforming IS 3034. The outer and inner pipe should be 76.2 mm and 41.9 mm dia respectively of3 mtrs long zinc coated with additional special alloy coating 300 mm on top side for additional protection of the terminal . The annular space between the pipes to be filled up with Compactfill (CF) (Crystalline Conductive) mixture which should bemachine pressed in the pipes not disintegrate or collapse when outer pipe corrodes . The inner pipe should be extended with terminals for connectivity.The job includes digging the pitsin any type of hard densesoilof min size 1000 X 1000 X 3050 mm depth taking out excavated soil, lowering/ placing thethe pipe in pipe earth electrode in pit in center ,filling of pure conductolite back filling compound (BFC Conductolite) having excellent moisture retaining capacity in 300 mm around the electrode(minimum 4 bags of 25 KG per pit per unit) or more qty of backfillcompoundas required to fill around the the elctrode in 300 mmin circumfrance of electrode . Contractor has to fill the remaining portion of pit withlow resistivity soil (agriculture soil) free from stones etcs, to be bring from out side defence landas the soil resistivity ofStn is very high and mixed with min 3 Bags of 50 Kg each of Bantonide clay. The BFC should be eco friendly it should not contain envernmently hazardous material/metal having ROHS certification from NABL accredited lab.The earth pit should be provided with a FRP earth pit cover for protection and safe guard of terminals. The material of earth electrodeshould have good electrical conductivity & anti corrosion property in wide range of soil conditions. The job also include M & L for in PCC(1:3:6) typeC-1 around the FRP cover for support and foundation and colouring the PCC work withdesired colour.completeall as specified and directed. Item Continued as 6.01 62 Note : (i) Design of earth electrode should be of pipein-pipetechnology .(ii) Contractor have to submit literature of earth electrode and get the make approved of GE before procurement.(iii) The earth electrode shall be CPRI tested to withstand short current test for 60kA rms for 1.0 second and 150kA for peak current.(iv) Contarctor has to fill pure back fill compound conductolite all around the earth electrodein 300 mm bore up to full depth of bore.(v) Contractor shall refill the pit with low resistivity soil (agriculature soil ) free fron stone etc and mixed with 06 bags of Bentonite of 25 Kg each to achive the low resistance values. (vi) copper strip will be laid below 60 cm from ground level and connected to test point through plinth protection. This Earthing System used for VCB and RMU only. For Solar Power Plant Earthing System is already deemed to be included in quoted rates.(vii) Necessary cost of repair to plinth protection and connected plate and earth continuity conductor by providing 2 x brass nuts bolts and brazing of joints,bringing argiculture soil from out side defence land and cost of 6 x Bags of bentonidedeemed to be included in the item rate.(viii) Contractor has to clear the side and disposed off the excavated soil from pit on completion of work. 63 SAFETY EQUIPMENTSSupply and fixing Rubber hand gloves suitable for 11 KVas per OEM recommendationcomplete all as specified and directed. 64 S&F for glass framed Shock treatment chart both in Hindi & Englishand connected accessoriescomplete all as specified and directed. 65 S&F for dry powder chemical type 4.5 kg fire extinguiser with clamps and connectedaccessories ISI Marked complete all as specified and directed. 66 S&F for single line diagram, schematic diagrams etc. of A1 size on suitable Aluminium sheet including lamination etc. as required as per OEM recommendationcomplete all as specified and directed. 67 Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. 68 Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation, manholes, laying of UG cables/pipes etc. not exceeding 10 Sq.m on plan and getting out in soft/loose or any type of soil complete all as specified and directed. 69 Removing excavated material (soils) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. 70 Returning filling in, soft/looseor any type of soil including spreading leveling watering and ramming complete all as specified and directed. 71 Excavation in post holes (or similar holes) in soft/loose soil each n.exc 0.50 cum, getting out,returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface all as specified & as directed. 72 M&L for RCC M-20, design mix (using 20mm graded crushed stone aggregate), including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. 73 M&L for steel tubular swaged poles complete with cast iron base plate, finial taper plugs, bolts, nuts & screws as specified type 410 SP-31, 9.0 meter longinclusive of two coats of aluminium paint over one primer coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and directed.NOTE : (a) The poles shall confirm to IS - 2713 & each component pipe shall be ISI Marked & confirm to IS - 1161. (b) Necessary earthwork, PCC etc. shall be measured & paid separately under relevant items of work. 74 S & F LED Street lights nominal power 90 Watt, LED of Make Osram; Bridgelux ; Philips; Nicha; Cree; Samsung, LED wattage of minimum 3 watt each and Maximum 5 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen efficacy of minimum 120 lumens per watt, built-in integrated electronic LED driver, output open /short circuit protection, phase to phase protection, over voltage protection, surge voltage protection upto 4 KVs, protection grade IP 66, CRI greater than 80%, CW available CCT of 5700K, power factor of minimum 0.95, pressure die-cast aluminium alloy housing with polyester powder coated metallic silver finish after phosphochromate treatment, life span of minimum 50000 working hourswith IK10 and L70 on including fixing at any height and including wiring using three core PVC insulated, PVC sheathed, flexible stranded copper conductor FR-LSH cables suitable for outdoor use, 1.5 sqmm as per IS 694: 2010 complete all as specified and as directed.(i) If connection.cable from pole Juction box to street light and street light bracket up to 2 mtrs be included and measured in unit rate item, Beyond 2 mtrs of length to be paid seperately under respective items.(ii)At location where street lights/flood light are connected through overhead conductor, connection cable from light fitting to overhead conductor is deemed to be incl in the item rate. (iii) All LED street light/flood lights shall be properly connected with earth dolly provided with fittings and steel poles earth bolt.(iv)All LED lights have replacement warranty of 5 years from the date of completion of the contract accordingly condition 46 of GCC (IAFW-2249) shall be amended to extent mention above. Contractor has to submittwarranty certificate from manufacturer . Payment of light fitting will be released after receipt of 3 year replacement warranty certificate from manufacturer.(v) The LED lights will replaced bythe contractor free of cost in the case of manufacturing defects and Failure due to electrical impact if not connected properly with earth. Hence it is contractor responsibility to connect the light fitting earth wire and shall be grounded properly.(vi) The contractor shall submit the surge protection certificate and Type test certificate LM 79, LM 80 for luminaries from LED manufactutre. 75 M&L for Cement concrete (1:4:8) type D2, (Using 40mm graded crushed stone aggregate) as in foundations of poles and stay, filling and mass concrete complete all as specified and directed. 76 M&L for plain cement concrete (1:3:6), type-C2 (40mm graded crushed stone aggregate) as in foundation, filling and mass-concrete, coping etc for pole foundationwith and including necessary formwork complete all as specified and directed. 77 M&L PCC (1:2:4) type B2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete and copingwith and including necessary formwork complete all as specified and directed. 78 Material & labour for earthing complete with copper earth plate electrode 600 mm x 600 mm x 3.15 mm thick burried directly in ground (Earth pit not less than 4 mtr deep below ground level) with top edge of the plate not less than 3.25 mtrbelow ground level connected to copper strip 20 x 3.15 mm as earth lead by brass nut bolts washer including brazing the copper strip with copper plate as shown in electrical plate No 3 connected to earth test point including necessary excavation for earth pitin hard dense soil, rocky / disintergate rock, filling charcoal and salt around the plate in layers , filling the pit with low resistivity agriculture soil free from stones, to be bring from out side defence land and mixed with Bentonite , (4 bags of 25 Kg each ), construction ofinspection pit ( earth pit chamber) of brick work of size 600 x 600 x 600 mmwith PCC copping of 1 :1.5: 3, 12.5 mm aggregate A1 with MS sheet 2.8 mm plate cover on frame ofangle iron of size 40 x 40 x 5 mm with , wire mess, funnel, test point, 40 mm dia GI protection pipelightgrade and20 mm GI peforated pipefor wateringetc complete and testing on completion. The electrode and lead shall be of copper all as specified and directed by Engr-in-charge (Copper strip upto 7.5 RM will be included in the item rate and copper strip beyond 7.5 RM will be measured seperately Item Continued as 22.01 79 NOTE :-(i) Contractor shall uselow reisistivity fresh agriculture soil , mixed with 4 x Bags of bentoniteclay of 25 Kg each for refillingthe pit to achive the desired resistance.(ii) copper strip will be laid below 60 cm from ground level and connected to test point through plinth protection(iii) Necessary cost of repair to plinth protection as per existing specification and connected plate and earth continuity conductor by providing 2 x brass nuts bolts and brazing of joints,bringing argiculture soil from out side defence land and cost of 3 x Bags of bentonitedeemed to be included in the item rate.(iv) Contractor has to clear the side and disposed off the excavated soil from pit on completion of work.(v) Contractor has to submit test report of earthing after completing the earthing.(vi) Bentonite clay should be Conf to IS 6186: 1986.(vii) The cost ofCopper strip of size 20X3.15 mm from top of earth plate upto 7.5 meter above ground level is deemed to be included in the unit rate of above item.and copper strip beyond 7.5 RM will be measured seperately.(viii). All the joints in copper strip and connection with Earth Plate to be welded through brazing and in addition by proving brass nut bolt and washer are deemed to be included in the unit rate. (ix) Cost of brazing / welding and nut bolts are deemed to be included in the unit rate. (x) Cost includes removal of excavated soil upto a distance of 100 mtrs. 80 Supply and fixing copper strip of size 20 x 3.15mm as earth continuity conductor or main earthing lead fixed on V typeporcelain insulator, 4 BM, heavy duty ( ceramic bus bar supportinsulator off whitecolour ofsuitable for mounting strip of 20 mm wide x 3.15 min thick) saddle to wall, buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20 x 3.15 mm copper strip brazingto each joints and connected with by providingbrassnut boltsand washer including test point all as specified and directed by Engr in Charge. Note : Insulators shall be provided on every 50 cm. (Minimum 2 x insulators to be provided in every 1 x metre of strip and rate of the same deemed to included in quoated rates) 81 M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated (punned) upto 180mm thickness, complete all as specified and directed. 82 Supplying and laying un-reinforced precast concrete cable cover, class HV, type 1 with peak, size 300mm x 180mm x 40mm complete all as specified and as directed. 83 M&L for GI pipe 100 mm bore, light grade with all fittings and fixtures (ISI Marked), laid in trenches, under road or fixing on wall/ pole /crossing drain /nallah etc. of bore complete all as specified and directed. 84 Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc.with all fixing & connecting accessories complete all as specified and directed. 85 Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc.with all fixing & connecting accessories complete all as specified and directed. 86 Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc.with all fixing & connecting accessories complete all as specified and directed. 87 Supply, laying & testing PP-R IS-15801 (Polypropylene random co-polymer) pipe 3-layer 63 mm dia (outer green coloured UV stablilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded grade PN-10 SDR-11 ( Pressure nominal 10KGS/cm2 ) having thermal stability for hot & cold water supply including all types of plain and brss threaded PPR fittings of any size such as elbow, tees, FTA and MTA etc laid in trenches complete all as specified and as directed.Note:The contractor shall submit 15 Years warranty certificate against leakageand defect liabilty period deemed to amended acordingly. 88 Supply, laying & testing PP-R IS-15801 (Polypropylene random co-polymer) pipe 3-layer 32 mm dia (outer green coloured UV stablilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded grade PN-10 SDR-11 ( Pressure nominal 10KGS/cm2 ) having thermal stability for hot & cold water supply including all types of plain and brss threaded PPR fittings of any size such as elbow, tees, FTA and MTA etc laid in trenches complete all as specified and as directed.Note:The contractor shall submit 15 Years warranty certificate against leakageand defect liabilty period deemed to amended acordingly. 89 S&F for 63mm (OD) PP-R Gate valves (brass insert)and connected acessories complete all as specified and as directed. 90 S&F for 32mm (OD) PP-R Gate valves (brass insert) nd connected acessories complete all as specified and as directed. 91 M&L for hard core of gauge not exceeding 63mm with broken stone or boulders, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed. 92 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M35 grade conforming to IS 15658-2006 made by block making machine with strong vibratory compaction, of approved size, design & shape, cast in rubber mould, glossy finish of approved colour, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. 93 S&F for RCC pipes of 600 mm dia, NP-2 laid and jointed complete with collars complete all as specified and directed. 94 S&F for 250mm bore Flue pipes of mild steel sheet, black, in suitable lengths as approved by GE and fixed to walls complete all as specified and directed. 95 M&L for Brickwork with fly ash bricks (modular bricks ), straight or curved on plan exc 6m mean radius, built in cement mortar(1:6) complete all as specified and directed. 96 Material and labour for plastering 15 mm thick (in two coats of 10 mm and 5 mm thick) on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:4 with integral water proofing compound finished even and fair complete all as specified and as directed. Note: - Water proofing compound will be deemed to included in qoated rates. 97 M&L for applying three coats of white wash on newly plastered wall surfaces including preparation of surface complete all as specified and directed. 98 S & F hot rolled low tensile structural steel of grade E165 as per IS 15911: 2010 as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. Wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar works complete all as specified and as directed. 99 S & F hot rolled medium and high tensile structural steel of grade E165 as per IS 15911: 2010 as in framed work such as grills, grating, etc., with ends of bars of shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework water tanks and similar work complete all as specified and directed by Engineer-in-charge. 100 S&F flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. 101 S&F MS screw bolt (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5 cm and n. exc 10 cm long, diameter of neck 5 to 10 mm complete all as specified and directed. 102 Supply and fixinggalvanized steel chain link fence fabric of mesh size as approved , made out of 4 mm nominal dia of mesh wireconforming to IS 2712-2003 and having zinc coating of type heavy as laid down in IS-4826 including line wires/ binding complete all as specified and as directed(A Board of Officers under the orders of GE shall be convened to ascertain the weight per square metre of galvanized steel wire chain link fencing brought at site by the contractor against each lot of materials). 103 S&F 10mm round bars Fe-410-W (Gde-250) quality-A or Fe-290-(Gde-E-165) as in stiffner to hold the chain link fencing fixed with angle iron post inclucinding necessary welding and fixing arrangement at ends complete all as specified and directed . 104 S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steelpins, etc. complete all as specified and directed . 105 Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed. 106 Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface not exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed. 107 Materials and Labour for reinforced cement concrete M-20design mixin columns; pillars; piers; posts; struts etc,complete all as specified and directed. 108 S&F for Mild steel TMT bars 10mm dia and over, conforming to Fe 500 D, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 109 S & F for mild steel TMT bars 6 to 8 mm dia, conforming to Fe 500 D cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, stirup,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 110 M&L for construction of valve chamber with MS sheet cover 3mm thick with angle iron) frame of size 50 x 50 x 6mm and locking arrangements including painting one coat of primer followed by two coats of black sysnthetic paint including excvation and earth work in any type of soil,PCC (1:4:8) type D2 in foundation ,PCC benching 1:2;4 type B-1 ,PCC (1:5:8) block masonry 20 cm thick in cement mortor (1:6),10 mm thick plastering in CM 1:4 ,PCC bed in (1:3:6) and coping 50mm hick in cement concrete 1:2:4 type B1 using 20mm stone aggregate including necessary formwork,paintin one coat of red oxide and two coats of bituminious black paint on all steel surfaces as specified and as directed of sizes 800mm x 800mm x800mm (internnal dimensions) complete all as specified and as directed. 111 Sch A Part-II (Phase-II) 112 Providing Services for Manning and Operation of Solar Power Plant 0.8 MWp near 33 KV receiving stationat Sevoke Mil Station for FIRST YEAR after completion of Ph-I of the subject work with oneskilledcategory Electricianhaving certificate of Surya Mitra from NISE) for twoshifts of 8 hour, one helper (semi-skilled category) in two shift of 8 hrs eachcontinuous operation (including Sunday/Holiday) to maintain sub station in/out side Panels, Invertor, DC junction box, VCB as specified, including daily and weekly check up including cleaning of PV modules complete with suitable cleaning cloths etc , upkeeping the installation operational and in health condition, having own conveyance and communication system like mobile etc. complete, for Solar Power Plant with all minor consumable and expendable items and labour and tools for smooth and efficient operation complete all as specified and directed by Engineer-in-Charge. Make of spare parts / equipments of the Solar Power Plant :- Same as installed in the preceding phase of the work.Repair or replacement ofdefective components or spare parts will be carried out free of cost under DLP and comprehensive Maintenance as per OEM recommendation up to DLP period included in BOQ item No. 1.00. The Contractor may submit his claim for every months on pro-rata basis subject to condition 64 of IAFW-2249 (General Conditions of Contracts)The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 17,92,949.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. Item Continued as 56.02 to 56.06 113 NOTES :- In addition to and Manning, Operation and Maintenance of Solar Power Plant, the following works will also be carried out by deputing addl manpower where required, to the entire satisfaction of Engr-in-Charge.(a) Minor repairs and preventive maintenance required to ensure serviceability and efficiency of complete MRS complex including supply of HT 11 KV fuse wire of proper sizeand minor spares such as nut, bolts, spring, lock nut of VCB/OCB as per sample, broom, duster, grass cutting tools, phawara, pick axes for cleaning/grass cutting of complete at Sub Stn Complex. 114 (b) Record of activities such as voltage / current / PF / Energy consumed / temp of transformers, break downs, day to day maintenance of Solar PV Plant etc.(c) The contractor shall ensure that all safety precautions are strictly exercised by the staff employed by him.Adherance to IE rules and statutory rules in vogue must be ensured.The contractor shall be fully responsible for any mishap that occurs due to any fault of the employee or due to non adherance of safety norms.(d) Record of activities such as attendance register, duty roster, pay distribution register of the whole staff employed by the contractor.(e) The electrician staff employed by the contractor shall be ITI holder with four years experience. 115 (g) Security lights within the complex will be operate by the tenderer. (h) The under mentioned tool kitwill be provided at site with person on duty :-(i) Electrician tool kit such as screw driver set, tester, test lamp, cutting plier, insulation tape, fuse wire of required size. (ii) Tongue tester(iii) HT megger(iv) First aid box (v) Shock treatment chart duly framed(vi) 33 and 11 KV Hand gloves(vii) 33 KV discharge rod withcopper chain(viii)) Helmet -02 nos(ix) Suitable Footwear - 02 nos(x) Cotton protective clothing with long sleeves duly embossed with GE Sevoke as directed. The tenderersquoted rates shall be deemed to be include the cost of all above provisions and nothing extra will be paid on any account. 116 (xi) The Bidders shall abide by the latest Labour rules and minimum wages Act. Wagespaid by the bidders to the persons employed shall not be less than the minimum wages fixed by the state/central government from time to time whichever is higher. (xii) The Bidders is responsible for insurance, EPF, ESI, Bonus, Labour welfare cess et., as applicable and shall be paid to the workmen as per existing Labour rules/ Acts/ regulations and rate quoted shall be deemed to be included for the same.(xiii) Dress Code : The bidders shall provide the workmen with Dark Blue Colour uniform {formal pant & T-shirt} with labels showing/ printed i.e. Name of the firm and designation on front and on the back of the T-shirt along with protective clothing, Industrial safety shoes, protective gears like helmet, safety belt etc..(xiv) Supervision and attending of all incoming & outgoing Solar Power Plant equipment metering equipments & monitoring to loads & other parameters of incomming & outgoing feeders & maintaining log sheet and attendance sheet. 117 INSURANCE: The Bidders shall also insure the workmen employed on the job.The Bidders shall be responsible for all Accidents/Injuries happening to the workmen. Any accident causing minor/fatal injury, partial disability due to any untoward incident or non-adherence to safety and IE regulations or fault in maintaining of internal electric supply system or on account of any mishandling/ wrong operation/ lack of knowledge of safety precautions or on account of any circumstances beyond his/ their control, the bidders shall be solely responsible for settling all claims of compensation to the deceased, falling which department will have a right to recover any sum indicated/ claimed by Labour commissioner/court authorities. No claim whatsoever will be entertained in this regard. No compensation is payable by the department on this account. Bidders shall provide first aid boxes to meet any emergency situations. 118 All as perBOQ serial item No 56.01 to 56.06 as mentioned here-in-before but for SECOND YEAR after completion of Ph-I of the subject work .NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 18,75,076.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 119 All as perBOQ serial item No 56.01 to 56.06 as mentioned here-in-before but for THIRD YEAR after completion of Ph-I of the subject work .NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 19,61,175.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 120 All as perBOQ serial item No 56.01 to 56.06 as mentioned here-in-before but for FOURTH YEAR after completion of Ph-I of the subject work .NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 20,51,671.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 121 All as perBOQ serial item No 56.01 to 56.06 as mentioned here-in-before but for FIFTHYEAR after completion of Ph-I of the subject work .NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 21,46,848.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 122 All as per BOQ serial item No 56.01 to 56.06 as mentioned here in before but for SIXTH YEAR after completion of Ph-I of the subject work .NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 22,46,564.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 123 All as per BOQ serial item No 56.01 to 56.06 as mentioned here in before but for Seventh YEAR after completion of Ph-I.NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 23,51,386.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 124 All as per BOQ serial item No 56.01 to 56.06 as mentioned here in before but forEight YEAR after completion of Ph-I.NOTE :-(a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 24,61,315.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 125 All as per BOQ serial item No 56.01 to 56.06 as mentioned here in before but for Ninth YEAR after completion of Ph-I.NOTE :-(a)The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 25,76,917.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 126 All as per BOQ serial item No 56.01 to 56.06 as mentioned here in before but for TENTH YEAR after completion of Ph-I.NOTE :-(a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 27,03,441.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 127 Comprehenisve maintenance of Solar Power Plant 0.8 MWpfor FIRST YEAR after expiry of DLP of Ph-I of the subject work with including periodical Check up andmaintenance as per OEM recommendation& connected accessories through Authorised Original Equipment Manufacturers Service Centre Engineersor through OEM Certified Agencies as approved by GE, complete all as specified and as directed. NOTE :-(a) Service engineer will carry scheduled preventative maintenance checks on SPV as per the standard check list of the OEM (b) Service engineer shall carry out checks on Solar Plant, as per the manufacturer’s check list and as directed by Engr-in Charge and would correct / recommend / suggest improvement in operation and performance. (c) Service Engineer during the visit will report on the performance or any other abnormality and inform parts requirement, shall also submit the report on work done and recommendations as well as spare parts offers to the concerned authority for arrangement.(d)Cost of equipment and spare parts which is not covered in warranty and DLP shall be measured in PC Sum andcost of item priced upto ₹500.00 shall be deemed to be included in the comprehenisve maintenance quoted cost. Repairs of minor components any other major components are also in the scope and cost of labour for minor / major components is deemed to be included in the quoted rate for this item.(e) Cost of gaskets, metal/rubber washer, CI washer special cement and small nuts/bolts and screws required for repair shall be deemed to be included in the unit rated quoted by the contractor. 128 Comprehenisve maintenance of Solar Power Plant 0.8 MWpfor SECOND YEAR after DLPof Ph-I of the subject work with including periodical Check up andmaintenance as per OEM recommendation& connected accessories through Authorised Original Equipment Manufacturers Service Centre Engineersor through OEM Certified Agencies as approved by GE, complete all as specified and as directed. NOTE :-(a) Service engineer will carry scheduled preventative maintenance checks on SPV as per the standard check list of the OEM (b) Service engineer shall carry out checks on Solar Plant, as per the manufacturer’s check list and as directed by Engr-in Charge and would correct / recommend / suggest improvement in operation and performance. (c) Service Engineer during the visit will report on the performance or any other abnormality and inform parts requirement, shall also submit the report on work done and recommendations as well as spare parts offers to the concerned authority for arrangement.(d)Cost of equipment and spare parts which is not covered in warranty and DLP shall be measured in PC Sum and cost up to Rs. 500.00 shall be deemed to be included in the comprehenisve maintenance quoted costrepairs of minor components any other major components are also in the scope of Annual Maintenance Contract.(e) Cost of gaskets, metal/rubber washer, CI washer special cement and small nuts/bolts and screws required for repair shall be deemed to be included in the unit rated quoted by the contractor. 129 Comprehenisve maintenance ofSolar Power Plant 0.8 MWpfor THIRD YEAR after DLPof Ph-I of the subject work with including periodical Check up andmaintenance as per OEM recommendation& connected accessories through Authorised Original Equipment Manufacturers Service Centre Engineersor through OEM Certified Agencies as approved by GE, complete all as specified and as directed. NOTE :-(a) Service engineer will carry scheduled preventative maintenance checks on SPV as per the standard check list of the OEM (b) Service engineer shall carry out checks on Solar Plant, as per the manufacturer’s check list and as directed by Engr-in Charge and would correct / recommend / suggest improvement in operation and performance. (c) Service Engineer during the visit will report on the performance or any other abnormality and inform parts requirement, shall also submit the report on work done and recommendations as well as spare parts offers to the concerned authority for arrangement.(d)Cost of equipment and spare parts which is not covered in warranty and DLP shall be measured in PC Sum and cost up to Rs. 500.00 shall be deemed to be included in the comprehenisve maintenance quoted cost repairs of minor components any other major components are also in the scope of Annual Maintenance Contract.(e) Cost of gaskets, metal/rubber washer, CI washer special cement and small nuts/bolts and screws required for repair shall be deemed to be included in the unit rated quoted by the contractor. 130 Comprehenisve maintenance ofSolar Power Plant 0.8 MWpfor FORTH YEAR after DLP of Ph-I of the subject work with including periodical Check up andmaintenance as per OEM recommendation& connected accessories through Authorised Original Equipment Manufacturers Service Centre Engineersor through OEM Certified Agencies as approved by GE, complete all as specified and as directed. NOTE :-(a) Service engineer will carry scheduled preventative maintenance checks on SPV as per the standard check list of the OEM (b) Service engineer shall carry out checks on Solar Plant, as per the manufacturer’s check list and as directed by Engr-in Charge and would correct / recommend / suggest improvement in operation and performance. (c) Service Engineer during the visit will report on the performance or any other abnormality and inform parts requirement, shall also submit the report on work done and recommendations as well as spare parts offers to the concerned authority for arrangement.(d)Cost of equipment and spare parts which is not covered in warranty and DLP shall be measured in PC Sum and cost up to Rs. 500.00 shall be deemed to be included in the comprehenisve maintenance quoted cost repairs of minor components any other major components are also in the scope of Annual Maintenance Contract.(e) Cost of gaskets, metal/rubber washer, CI washer special cement and small nuts/bolts and screws required for repair shall be deemed to be included in the unit rated quoted by the contractor. 131 Comprehenisve maintenance of Solar Power Plant 0.8 MWpfor FIFTH YEAR after DLPof Ph-I of the subject work with including periodical Check up andmaintenance as per OEM recommendation& connected accessories through Authorised Original Equipment Manufacturers Service Centre Engineersor through OEM Certified Agencies as approved by GE, complete all as specified and as directed. NOTE :-(a) Service engineer will carry scheduled preventative maintenance checks on SPV as per the standard check list of the OEM. (b) Service engineer shall carry out checks on Solar Plant, as per the manufacturer’s check list and as directed by Engr-in Charge and would correct / recommend / suggest improvement in operation and performance. (c) Service Engineer during the visit will report on the performance or any other abnormality and inform parts requirement, shall also submit the report on work done and recommendations as well as spare parts offers to the concerned authority for arrangement.(d) Cost of equipment and spare parts which is not covered in warranty and DLP shall be measured in PC Sum and cost up to Rs. 500.00 shall be deemed to be included in the comprehenisve maintenance quoted cost repairs of minor components any other major components are also in the scope of Annual Maintenance Contract.(e) Cost of gaskets, metal/rubber washer, CI washer special cement and small nuts/bolts and screws required for repair shall be deemed to be included in the unit rated quoted by the contractor. 132 Prime Cost Sum. The prime cost to be used as directed by the Accepting Officer vide Condition 1 (v) and 5 of IAFW-2249 (General Condition of Contracts) forming part of the tender documents.(a) Provide a prime cost of Rs.3,00,000.00 forsupply only of spare parts required for comprehensive maintenance after expiry of DLP of Phase-I, through a BOO convened by the CWE. The spares shall procured directly from the OEMs or their aurhorised distributor/dealer as approved by GE.(b) Bidders/Contractors quoted amount shall be inclusive of his overhead and profit and including all taxes and insert amount to cover all. The Bidders/Contractors is to quote lump sum amount under Column 6 covering all the aspects mentioned here in before, representing (%) percentage under Column 9, Above/Below (+ or - denomination) the Prime Cost Sum inserted by MES under Column 5. However, the quoted amount under Column 6 shall not exceed 15% (Fifteen Percentage) of Prime Cost Sum inserted by MES under Column 5. In case, the Bidders/Contractors quoted amount is in excess of 15% of the estimated amount, the same shall be restricted to 15% (Fifteen Percentage) and the amount quoted shall be corrected accordingly to work out the contract sum. Item Continued as 70.01 133 NOTE:-Prime Cost Sum shall be governed in terms of condition 1 (v) and 5 of IAFW-2249 (General Condition of Contract) and to be regularized through Deviation Order. The following procedure shall be adopted to execute the Prime Cost Sum :-(a) Step –I Service Engineer of OEM along with site executive shall visit every month for Preventive and corrective maintenance on all the Solar Power Plant as specified in BOQ herein before, and undertake routine comprehensive maintenance and identify the list of damage / defective spare parts in Solar Power Plant. Service Engineer have to submit report to concerned Engr-in Charge and BOO before undertaking replacement/ repairs, except in case of emergency.(b) Step –II Subsequently BOO will verify the same and submit the finding to the CWE after assembly of board in terms of CA Provision for concurrence.(c) Step –III After concurrence of BOO, the Engr-in-Charge will direct the contractor and the service provider to replace the unserviceable spare parts.(d) Step –IV Serviceability certificate of Solar Power Plant duly signed by the Service Engineer, BOO findings, GST enabled purchase voucher for the replaced spare parts alongwith draft DO details shall be submitted to the GE for placing of DO’s. The advance on account shall be accompanied alongwith the said DO’s for payment.
Contract Date: Mar 17, 2026 Contract Value : ₹ 6.86 Crore
Statutory Bodies & Commissions/Committees No of Bidders 6
West Bengal View Result →
25.
Defence #9528620 AOC
Tender For Provision Of Cgsd (Kochi) At Willingdon Island, Kochi; 1 SCHEDULE A Part - I (BUILDING & STRUCTURE WORKS)Details of prepriced schedule is given in tender documents. 2 SCHEDULE A PART-II ( SITE CLEARENCE/DEVELOPMENT & EARTH WORKS) Details of prepriced Schedule is given in tender documents. 3 SCHEDULE A PART-III (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents. 4 SCHEDULE A PART-IV (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents. 5 SCHEDULE A PART-V (FIRE FIGHTING)Details of prepriced Schedule is given in tender documents. 6 SCHEDULE A PART-VI (ROAD/PATH/ HARD STANDING/CULVERT)Details of prepriced Schedule is given in tender documents. 7 SCHEDULE A PART-VII (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents. 8 SCHEDULE A PART-VIII (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents. 9 SCHEDULE A PART-IX (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents. 10 SCHEDULE A PART-X (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents. 11 SCHEDULE A PART-XI (COMPOUND WALL) Details of prepriced Schedule is given in tender documents. 12 SCHEDULE A PART-XII (ORGANIC WASTE CONVERTER AND SMART ENERGY METER) Details of prepriced Schedule is given in tender documents. 13 SCHEDULE A PART -XIII (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the rate shall be quoted by the bidder. 14 INTERNAL WATER SUPPLY S & F for 15 mm dia bore CP two way bib cock with CP wall flange (Make : Jaquar Model No. OPP15041PM / Eqvlt in Kohler/Grohe), cast copper alloy, screwed down high pressure with crutch screwed both ends for CPVC pipes or for union and fixed complete all as specified and directed by Engr-in-charge. 15 S & F for 15 mm dia bore CP bib cock with CP wall flange (Make : Jaquar Model No. OPP15037PM / Eqvlt in Kohler/Grohe), cast copper alloy, screwed down high pressure with crutch, screwed both ends for CPVC pipes or for union and fixed complete all as specified and directed by Engr-in-charge. 16 S & F for 20 mm bore concealed Stop cock reqular brass body with spindle extnwith Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-083CQT & ALD-089CQT)(Make : Jaquar Model No. ALD 089 CQT/ Eqvlt in Kohler/Grohe), cast copper alloy, screwed down high pressure with crutch , screwed both ends for CPVC pipes or for union and fixed complete all as specified and directed by Engr-in-charge. 17 S & F for 25 mm dia bore concealed Stop cock reqular brass body with spindle extn with Flush Cock & Wall Flange 25mm Ceramic Disc Cartridge) with Plain Knob (Make : Jaquar Model No. ALD 081/ Eqvlt in Kohler/Grohe), cast copper alloy, screwed down high pressure with crutch, screwed both ends for CPVC pipes or for union and fixed complete all as specified and directed by Engr-in-charge. 18 S & F 20mm bore CP angular stop cock with CP wall flange (Make : Jaquar Model No. CQT 23053 / Eqvlt in Kohler/Grohe), cast copper alloy, screwed down, high pressure with crutch, screwed both ends for iron pipe or for union and fixed 19 S & F for 100 mm overhead shower rose round shape single flow (ABS Body chrome plated with gray face plate (Make : Jaquar Model No. 1989 with SHA 479L300S / Eqvlt in Kohler/ ESS ESS) with Shower Arm ø20mm & 300mm Long Round Shape with 90˚ Bend for Wall Mounted Showers with Stainless Steel connected to pipe complete all as specified and directed by Engr-in-charge. 20 COOLING APPLIANCESDesign, Supply, Installation, Testing and Commissioning of Invertor Type Floor Mounted Packaged AC Units including indoor and outdoor unit complete of specified capacities, combination of energy efficient Inverter compressor plus fixed compressors, nominal capacity condensing unit with all standard fittings, safety devices, like HP/LP cutout, single phase preventor, overload relays, R-410A Gas, vibration isolation pads etc. Suitable to work till 50 Deg ambient, Blue Fin Condensor and Corrosion Resistant Body, Wide Voltage Range 360V - 440V, The quoted rate shall include Group controller also asrequired for controlling AC from a single point and timer option for load sharing of AC units complete all as specified and as directed by Engineer - in - charge, of following capacities.Note: Design report shall be submitted before execution of work at site by the contractor to GE for his scruitiny/comments and further submitted to AO for his approval.Make: Blue Star/Daikin/Haeir/Godrej/Voltas/Equivalent. 21 a) 22 TR Inverter Package AC Units 22 b) 16.5 TR Inverter Package AC Unit 23 BLANK 24 BLANK 25 BLANK 26 Supply, Installation and Testing of Refrigerant pipingwith necessary clamping (suction & Discharge) Hard/Soft drawn Copper tube of suitable sizes, with copper elbows, tees, Tubular Nitrile Insulations etc as required complete all as specified and as directed by Engineer - in - charge. 27 S & F Control Cabling B/W Indoor & Outdoor units 28 M & L Refrigerant Gas - R410A 29 Supply, Installation and Testing of Hard PVC drain piping. Drain piping with Tubular Nitrile Rubber Insulation: complete in all respects, well clamped till drain Points complete all as specified and as directed by Engineer - in - charge. For All Units 30 DUCTINGSupply, fabrication, installation, testing of GI rectangular ducts, complete with all fittings such as tee, bends, special off shoots, inspection doors, transformation pieces etc. as required as per IS 655 including suspension and supporting arrangement for plenum, duct etc. required complete all as specified and as directed by Engineer - in - charge. 31 a) Using 0.63 mm (24 Gauge) GI sheet 32 b) Using 0.80 mm (22 Gauge) GI sheet 33 c) Using 1.00 mm (20 Gauge) GI sheet 34 DUCT INSULATION & LININGSupply and Installation of Acoustic Insulation of ducts using 9MM Open Cell Nitrile Rubber, well adhesived, 150 - 180 Kg/cm2 complete all as specified and as directed by Engineer - in - charge. 35 Supply, installation & testing of Thermal Insulation of ducts using 9MM Closed Cell Nitrile Rubber, well adhesived, 40-60 Kg/cm2 complete all as specified and as directed by Engineer - in - charge. 36 S & F Canvas Connection 37 AIR DISTRIBUTION PRODUCTSSupply and Fixing of Powder Coated Aluminium Grills/ Diffusers (Supply/ Return) complete all as specified and as directed by Engineer - in - charge. 38 S & F Collar Dampers 39 Supply and Installation of Fire Dampers complete all as specified and as directed by Engineer - in - charge. 40 Supply, Installation, Testing and Commissioning of Heater Bank Plus Humidistat Arrangement complete all as specified and as directed by Engineer - in - charge. 41 Supply and fixing, testing and commissioning water coolerhaving stainless steel body with inbuild purifier HIMA 7 NHC, dispencing capacity 125 ltr/hr and storage tank capacity 40 ltr normal and 40 cold electric driven (single phase), 230 volt, AC power supply with all connecting accessories complete all as specified and directed. 42 Supply and fixrefrigerator, electric driven (single phase), 220 V,50 HZ, capacity 195 Litres, 3 Star rated direct cool inverter, single door all as specified and directed by the Engineer-in-Charge. 43 Supply and install, testing and commissioning of split type air conditioner 1.5 TR Capacity of invertertechnology 5 star rating with cordless remote control single phase 240 volts complete with all accessories such as indoor and outdoor units and refrigerent tubing of adequete length as required at site indoor mounting plate, duly powder coated fixing with anchor bolts at any height, drain pipe of suitable size brought to ground level from any height, initial filling of refrigerent gas including making round hole on existing wall for taking up refrigerent tubing, drain pipe, cables, etc and making good the disturbed surface by matching with existing adjoining surface complete all as specified and directed (Cooling appliances- qty 4, Air conditioning- qty 10) 44 Supply and fix Voltage stabilizer 3 KVA for automatic operation, single phase naturally air cooled indoor type, wall mounted & designed for input variation between 170 V to 280 V with output voltage stabilized at 230 V with accuracy of ± 2.5% 45 Supply and fix Voltage stabilizer 4 KVA for automatic operation, single phase naturally air cooled indoor type, wall mounted & designed for input variation between 170 V to 280 V with output voltage stabilized at 230 V with accuracy of ± 2.5% (Cooling appliances-qty4, Air conditioning- qty 10) 46 AIR CONDITIONINGSupply and install,Testing & commissioning of split type air conditioner 2 TR capacity of inverter technology 5 star ratingwith cordless remote control, single phase 240 volts complete with all accessories such asindoor and outdoor units and refrigerent tubing of adequete length as required at site, indoor mounting plate, duly powder coated fixing with anchor bolts at any height, drain pipe of suitable size brought to ground level from any height, initial filling of refrigerent gas including making round hole on existing wall for taking up refrigerent tubing, drain pipe, cables etc and making good the surace by matching with adjoining surface complete all as specified and directed. 47 Supply and fix Voltage stabilizer 5 KVA for automatic operation,single phase naturally air cooled indoor type, Wall mounted type & designed for input variation between 170 V to 280 V with output voltage stabilized at230 V with accuracy of ± 2.5% 48 INTERNAL ELECTRIFICATIONS & F LED Mirror light 1 x 5W LUMOS ECCO 1 feet Make: Luker or Equivalent 49 S & F modular MCB DBOx 3 Pin Socket with MCB SP 20 Amp, 240 V including plastic enclosure as per manufacturer instruction fixed on wall surface complete for Air conditioner all as specified and as directed. (Make:-Havells, Model-DHDMCSN0251016 or equivalent) 50 Supply and fix Air circulator of 600 mm sweep AC single Phase. 230V, 1440 RPM complete all as specified and as directed. (Make: Havells model, Turbo Force Wall or equivalent) 51 S & FVertical triple pole & neutral (VTPN), double door, 16-way metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for FPMCCB as incomer and TPN/SP MCBs as outgoing, reversible metal door, 200 A copper busbar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed. 52 S & FVertical triple pole & neutral (VTPN), double door, 4-way metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for FPMCCB as incomer and TPN/SP MCBs as outgoing, reversible metal door, 200 A copper busbar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed. 53 M & L for Flame ProofMCB Distribution board SPN 12 way, with case iron body, powder painted, with 100 Amps rated bus bar etc. including provision of one 32 Amps SPN MCB as incoming and 6 Amps SP MCB -10 Nos as outgoingcomplete all as specified and as directed. 54 M & L for Flame ProofMCB Distribution board SPN 8 way, with case iron body, powder painted, with 200 Amps rated bus bar etc. including provision of one 32 Amps SPN MCB as incoming and 6 Amps SP MCB- 6 Nos as outgoingcomplete all as specified and as directed. 55 Supply and fix Engage light with Green & Red LED complete all as specified and as directed 56 Supply and fix of CS mounted high intensity LED search light, long range, manually swivel in all direction, 250 W, minimum range 700 meters, Single, LED Efficiency> 140 lm/w, PF> 0.95, CCT 5500K - 6500K, Optical grade PMMA/PC lens/reflector efficiency>95%, multiple circuit to avoid complete run down, anti UV, narrow beam 5 degree, die cast LM6 body with air fins, powder coated, constant current, an average lux at 10 meter - 8000 lux with circle of approx 600 mm, working temp: -20 to +60 degree C, input Volt 100-300 VAC, 50 Hz, PF >0.95, IP-66, confirming to LM79/ LM80 and type tested as per IS: 10322/ IS: 13383, BIS approved and Govt lab tested for lux intensity. The search light is completed with manual revolving CS stand D20cm x H15cm (min.) with 3 nos. foundation holes for mounting of searchlight on watchtower structure, manual rotation of light on horizontally 360 degree with 45 degree tiltable with provision of both instant locking arrangement at desired position. Model No. CS-LRFLL-25PC25 of KALIN make or equivalent 57 Supply, install, testing and commisisong of outdoor floor/wall mounted thermoplastic polycarbonatefeeder pillar panel, Enystar EmptyEnclosures, IP-65, weatherproof, corrosion free, Halogen and Silicon Free, Frame retardant with Opaque Lid Size-[276 x 546 x 186]mm and Transparent Hinged Lid, completed all as specified and directed. 58 M & L for TV socket module metal flushed including flushed Box cover plate Box for 2 way module complete all as specified. 59 M & L for telephone jack with module metal flushed including flushed Box cover plate Box for 2 way module complete all as specified. 60 Supply and lay coaxial cable for TV Cabledrawn through conduit 61 S & F flame proof exhaust fan 300 mm sweep, single phase, 1440 RPM complete all as specified and as directed. 62 FIRE FIGHTINGSupply and fix Foot Valve conforming to IS 4038, 100 mmdia. 63 Supply and fix Foot Valve conforming to IS 4038, 150 mmdia. 64 Supply and fix Cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 100 mm dia bore and fixing up in Cast Iron Water supply mains of size 100 mm dia. 65 S & F sprinkler flexible drop pipe 1 mtr long. 66 S & F sprinkler rossette 25 mm dia. 67 Supply and installation, testing and commissioning of Analog Addressable type Active Loop Repeater (Loop power/external power) Fire terminal with inbuit turbo isolator, Backlit LCD Display 6x40 characters display, having Controls For Reset, Mute, Accept, Silence alarms and Self Test, with programmable free keys and Duly Approved byEN54/LPCB/VDS/FM Make: SIEMENS/NOTIFIER/BOSCH 68 M & L for Low smoke Zero helogen flame retardent fire alarm cable2 core, 1.5 mm² copper conductor confirming to BS7629-I, BS6387 & rated for 500 v grade having plaine sraded copper coductutor with priming insulation of glass mica fire resistance tape & secondery insulation of high performancesilicon rubber with electrostatic screen of aluminium fire barrier Type LT53 outer sheath confirming to BS 7655, red in colour drawn through & including concealed steel conduit including laying,fixing,connecting complete all as specified and directed. 69 Staircase signage down of make bajaj cat part no. 111499 model no. DSDWBB 3W double side display for staircase downwards (with 2 hours built in battery backup) complete all as specified and directed at site complete all as specified and directed. 70 S & F wall mounted LED emergency Exit signage luminaire Lit up using regular mains supply comes with a unique rechargeable Ni-Cd battery capable of emergency back up upto 05 hours(Cat No. 220211 Make Bajaj or equivalent to CG/Havells. 71 Supply, Installation, test and Commissioning CPRI APPROVED factoryfabricated, indoor type, LT panel board , made out of 2 mm thick CRCA Sheetsingle door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwith 50X50X6mm Mild Steel Angle Iron Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation includingcomplete all as specified and comprising of the following:- Make of MCCB/MCB -MDS/LEGRAND/L&T/HEGGER (Main Fire Fighting Panel)INCOMING(i) MCCB 4 Pole 400 amp 50 Hz, 415 V with rupturing capacity 35 KA with microprocessor based release - 01 No.(ii) Voltmeter Digital type 0-500 Volts range flush type with selector switch- 01 No.(iii) Aluminium Bus bar TPN - 600 amps- 1setOUTGOING(i) MCCB 3 Pole 200 amp 50 Hz, 415 V with rupturing capacity 35 KA with microprocessor based release- 02 No.(iii) MCB TPN 32 Amp - 03 Nos.(iv) 80 HP S/D soft STARTER- 02 Nos.(v) DOL STARTER 7.5 HP- 02 Nos.(vi) Motor Protection Relay32-88 amps- 2 nos. (vii) Motor Protection Relay2- 5.5 amps- 2 nos. (viii) On/Off/Trip Indication Lamps, 220 V AC- 6 nos.(ix) Start/Stop Push Button, 4 Nos. (x) Phase indicating lamps RYB for incoming and each outgoing connection.(xi) Digital type Ammeter 0- 150 amps with selector switch and CT coils of suitable capacity for incoming and each outgoing connection- 1 no. 72 M & L for coating and wrapping of under ground steel pipe buried in soil shall have protection against corrosion as per IS-10221.The coating and wrapping shall be carried out in systamatic manner to get uniform thickness of coating as per IS specification 73 Supply, Installation, test and Commissioning CPRI APPROVED factoryfabricated, Indoor type, LT panel board, made out of 2 mm thick CRCA Sheetsingle door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwith 50X50X6mm Mild Steel Angle Iron Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation includingcomplete all as specified and & directedby Engr-in-charge comprising of the following :– ( Booster terrace pump panel)INCOMING:-(a) INCOMING MCCB 40 A 25 KA, 4 POLE- 01 No.(b) Busbar TPN of size 100 apms - 1 setOUTGOINGS:-(a) MCB 3 POLE TPN 32 Amps,10 KA-2 Nos.(b)DOL Starter for 7.5 HP Pump set-1 Nos.(c) Ammeter Class-1, digital panel mounting type 96mmx96mm L & T cat no WDS301FCA00 including CT 50X5 Amps 3 nos & selector switch-4 nos(d) Voltmeter Class- 1, digital panel mounting type 96mmx96mm L&T CAT NO.WDS301FEV00 & selector switch - 1 no.(e) LED TYPE indicator lamp 1 set (set of three for R,Y,B)(f) Mini protecrionRelay 4-11 amp - 1 nos. 74 Fire Extinguisher mechanical Foam type trolly mouted of 9 Liters capacity. Ceasefire 9 litrs fire Extinguisher AFFF Foam type, External Cartridge type, Pressure Guage Gross weight 14.6 Kg, empty weight5.6 Kg, Can height 611 MM, Diameter 175 MM, Discharge time less than 60 Secs controllable discharge mechanism, Minimum 6 Mtrs, Applicable on Class A, B, can construction deep down & CO2 Mig welded Valve Construction: Forging & Machining, Internal coating of can: Epoxy powder coating, External coating of can: Epoxy poyster powder coating sheet metal thickness 2.0MM,1 year warranty. Make Cease Fire Or Equivalent. (pol store) 75 Supply, Installation,Testing & commissioning of Carbon Dioxide (Co2) type fire extinguisher of 4.5 Kg confirm to IS: 15683, with ISI marked/TAC approved fitted with required accessories including wall suspension brackets. 76 Supply, Installation,Testing & commissioning ofDRY CHEMICAL POWDER (ABC) stored pressure type fire extinguisher of 6 Kg confirm to IS: 15683, with ISI marked/TAC approved fitted with required accessories including wall suspension brackets. 77 Supply and fixing single unit flame type detectors (Triple IR infrared flame detectors) Addressable type Flame detectors with UV/IR detection capacity (add up cost of module to be a complete set, the type of module shall be relaying type module) complete all as specified and directed 78 Supply and fixing,Test and Drain valve 65/50mm, forged brass body, brass chrome plated ball, 304SS stem with Polycarbonate sight glass, indicator and handle made of steel complete all as specified and directed 79 SPECIAL EQUIPMENTS FOR STORESDesign, manufacture, Supply, installation, testing and commissioning of Automated Storage and Retrieval System with storage racks, pallets, stacking crane, computer hardware with compatible inventory software as a turnkey solution complete all as specified and directed. Automated Storage and Retrieval System shall consist of computer controlled & PLC stacker crane driven system for automatically placing & retrieving materials from defined storage locations. The crane shall be capable of lifiting, stacking and retriveing the pallet loads weight upto 1125 Kg (max) complete all as specified and directed by the Engineer-in-Charge. Technical data for design of heavy duty ASRS:-(a) Dimensions:-Height:10 Mtrs for racking system which shall be designed and constructed to store the required no. and size of pallets.(b)Storage capacity:-Pallet Size: 1300 (W) x 1200(D) x 1250 (H) in mmPallet Nos.: 480Pallet load capacity: 1125 KgTotal capacity: 540 Tons(c) Stacker Crane: Double mast automated stacker crane for handling Pallet, size 1300mm(W) x 1200mm (D) x 1250mm (H) and pay load (including Pallet self weight) of 1125 Kg max. The stacker crane shall be capable of picking up the pallet from in-feed conveyor or loading station and stacking it into empty slots of racking system. Similarly, it shall also be capable of retrieving the palltet from racking system and putting it on the same conveyor or unloading station. Stacker crane will be mounted on rails at the bottom to traverse the length of the storage system. Top rails mounted on the racking system shall also support it. PMDC motars should be used with required counter weight for better efficiency of verticle travel.General technical parameters of stacker crane:Technical parameters/Type- Double Mast(i) Operation mode (Networking)- On-line automatic / Single automatic (Ground/Boarding) /Manual operation (Boarding) / Maintenance (ii) Communication Means- Wireless 80 (iii) Power supply mode- 380 to 415 V, 50 Hz, three phase five wire (iv) Addressing mode- Horizontal and verticle operation: photo electrical sensor + bar code scanners(v) Positioning / Reduction accuracy (mm) level- lifting ± 3 - 5, Fork : ± 3(vi) Fork unit- 1 Double deep fork(vii) Load unit- MS Pallet (viii) Total Height- 10 Mtr(ix) The normal lifting speed (m/min) - 10 MPM(x) The normal running speed (m/min) - 65 MPM(xi) Rated load- 1125 Kg(xii) Receipt equipment fixed platform/conveyor/lifting /platform(electric/manual)- Conveyor(d) Pallets: to stack and retrieve the pallet weighing up to loaded pallet weight 1125 Kg at height up to the last loading level in the racking system. It should have retrieval mechanism to enable stacking & retrieval of pallet from either side of the rack and also to pick up the load directly from the loading station.Pallet Details:-(i) Dimensions - 1300mm(W) x 1200mm(D)(ii) Pallet height- 1250 mm(e) Racking system:- Two single aisle having two row racking system each with 05 verticle levels for storage of material. Racking for double deep type storage of 480 Pallet of size 1300mm(W) x 1200mm (D) x 1250mm (H). Loaded pallet weight: Pay load with pallet 1125 Kg max. System details:-Working aisle -01 Nos. (Double deep)Store rack -24 Nos./RowTotal rack in 1 aisle-24 (Left) + 24 (Right)= 48 Nos.No. of level- 5 Nos/RackTotal Pallet-48 x 5 x 2 = 480 Nos.Load capacity- 1125 Kg/LevelDouble mast stacker crane-01 No. 81 (f)Aisle Equipment:-This will consist of electrical as well mechanical aisle equipments and willl be designed as per the pallet requirement. The mechanical Aisle equipment of bottom rail shall consist of I Beam and will be provided with adjustable calmps for holding the rail in position to ensure proper alignment. Top rail shall be mounted on the racking. The electrical aisle equipment shall consist of power rail (fully enclosed bus bar having 7 pole system), which is mounted on the racking system below the first loading level.(g) Details of rack members:-The racking system shall consist of cold-rolled steel sections as per manufacturers design to accommodate and store pallets and connected systems.(h) Loading- unloading station/ Conveyor(i) Pallet Load 1125 Kg max.(ii) Bearing- SKF Equivalent make(iii) Motor- Seimens/Sew Euro Drive/Nord Sew/ Bonfiglioli or equivalent(iv) Gear Box- Bonfiglioli Make or equivalent(v) V.F.D.- Yashkawa make or equivalent(j) All steel surface shall be powder coated finish with 8 tank treatment process.(k) Maintenence: The annual maintenence of complete ASRS system during the defect liability period of two years shall be included in the rate quoted for the system and the AMC contract duly signed with the manufacturer of the ASR system shall be submitted at the time of handling over the system. The AMC shall include all spares and consumables etc required during the period of two years and nothing extra shall be paid on this accountNote- 1)Mechanical safety provision (i) End of aisle shock absorbers / bumpers for stacker crane.(ii) End of travel buffer for the lifting crane.(iii) Safety catches on lifting carriage.(iv) Anti-tilt mechanism for the stacker crane. An additional antifall device must be provided for the lifting carriage. In the event of electromagnetic break motor failure or malfunction, this device should automatically engage to safely hold the carriage and prevent any freefall, thereby avoid accidents due to emergency brake failure.(v) Continuous rail cleaning brush for floor rail.(vi) Adjustable rail clamp to ensure alignment. 82 (vii) Resilient rubber pads on adjustable clamps for vibration dampening.(viii) Profile check on lifting carriage to check all three dimensions (width, depth & height) of the pallet. Note - 2 Electrical safety provision (i) There shall be Emergency stop push button at all panels and stations.(ii) Optical light beam amd mechanical safety sensor to stop the operation in case of improper storage.(iii) Back up circuitry for proper system operation.(iv) An electromagnetic brake shall be used to avoid the slippage of the hoist.(v) Stopper shall be provided for the maintenance door.(vi) Load cells shall be provided for the over weight of tray.(vii) Automatic door shall be provided for operator safety while machine in operating condition.Note - 3 Physical safety provision (i) The ASR system shall comprise of safety fences having grid size of max. 40 x 40mm & wire dia should be of min. 3 mm. Height of the fencing should be minimum 2.0 meter.(ii) One No. of electromagnetic aisle access door shall be provided. It should cover the complete length of the system on one side.(iii) A manual locking system to restrict the movement of unauthorised personnel shall be provided.NOTE: 1) Design report shall be submitted before execution of Work at site by the contractor toGE for his scrutiny / comments and futher submitted to AO for obtaining approval. Item No. 13.070 below shall be compatible with this item/ system and both should be integrated. Changes in make of different components of ASR system and minor changes in different parameters are permitted with approval of Accepting Officer as per recommendation of ASR system manufacturerprovidedthe end objective of the system is complied.2) The ASR system is to be installed in Bulk store house complex. Necessary civil works for installation of the ASRS required in the building is included in the scope of this item. Neccessary arrangements for integration of system with flooring and overhead trussess of the building shall be done at appropriate stage and shall be included in the rates quoted3) The PLC program backup for the ASRS and Advanced Inventory Management System shall be provided in an editable format. The WMS program shall be provided along with its source code to enable the user to perform maintenance, modifications and future upgrades as part of the project acceptanceMake of ASR system:Armstrong Ltd/ Godrej Koerber/ Kardex India storage solutions Pvt Ltd/ Daifuku India Pvt Ltd/ Addverb technologies Ltd/ Craftsman Automation Ltd/ Tech-mark 83 Supply, installation, testing and commissioning of Advanced Inventory Management System with compatibile computer hardware and integrated inventory and weight management system with PLC based software complete all as specified and directed by the Engineer-in-Charge. Technical specification of the system(i) System Height(Min) : 6400 (±100) mm(ii) System Width(Min) : 3150 (±100) mm(iii) System Depth(Min) : 2300 (±100) mm(iv) System Base(Min) : 7.24 Sq.Mtr(v) Tray Int. Size(Min): 300 (H) x 2450(W) x 500 (D) in mm(vi) Tray dead weight(Min) - 57 Kg (Approx.)(vii) Per tray weight capacity - 300 Kg(Min)Technical specification of the system:-(viii) Tray Quantity : 32 Nos.(ix) Usable net load - 9.6 ton(Min)(x) Storage surface area per system - 39.2 sq mtr(Min)(xi) Door - Automatic, (xii)Power supply - 440V, 50/60 Hz, 3 Phase(xiii) Motor 3 Phase 1440 RPM - Seimens make or equivalent(xiv) Chain - Diamond makeor equivalent, (xv)Bearing - SKF/NTN make or equivalent(xvi) External cladding - Epoxy powder coatedSafety Features:1. Photo curtain at access port, 2. Motor Protection relays, 3. Limit switch at door, 4. Single phase preventer,5. Switch mode power supply, 6. 15 Min battery backup for PLC, 7. Noise less than 60db, 8. Emergency stop various safety alertsNote: 1) The system and software provided under this item shall be of same make as for item 13.066 to 13.069 or a compatible system and software as recommended by the chosen manufacturer of ASR system. This system shall be integrated with ASR system.2) Comprehensive maintenance of the system during two years of defect liability period shall be a part of this item and rates shall be quoted accordingly. Comprehensive maintenance shall include all spares including software update. The ASR and advanced management system shall be operated by single warehouse management system.3) The PLC program backup for the ASRS and Advanced Inventory Management System shall be provided in an editable format. The WMS program shall be provided along with its source code to enable the user to perform maintenance, modifications and future upgrades as part of the project acceptance 84 Supply, installation and testing of Car Traffic Boom Barrier 6 mtr suitable to working on power supply 230 Volt, 50 Hz, 24V DC electric motor, adjustable with CAMS, operating ambient temperature from -20 to +55 Degree Celsius, uses cycle 2000/Day, air cooling, type of beam is rectangular with skirt, effective torque 280-290 Nm open/close time 2 to 4 Sec complete all as specified and as directed by Engineer-in- charge.Make: FAAC/Parkilo/Skidata/BFT 85 EXTERNAL WATER SUPPLYSupply and fix Foot valve conforming to IS, 100 mm dia complete all as specified and directed. 86 Supply and fix Cast iron air release valve with 100 mm bore and two outlets as per IS:14845 complete all as specified and directed. 87 Supply, installing, testing and commissioning of electrically driven horizontal Centrifugal Pump set 9.0 LPS at 50 Meter Head as per specification, motor TEFC type, 2880 rpm, 415 V, 50 Hz, 3 phase, class F insulation, IP 55 protection, starting on suitable Star Delta starter. The pump shall be horizontal, end suction, top discharge. The pump shall have cast iron casing, cast iron/bronze impeller (as per manufacturer), carbon steel shaft with common base frame (fabricated mild steel channel frame or cast iron type) placed on RCC (1:2:4) including foundation, bolts, nuts etc. complete with antivibrator pad as required capable of discharging not less than 550 LPM at 45 mtr head inclusive of suitable rated three phase starter as recommended by the manufacturer, PVC insulated copper cable connection from starter to the motor terminals all as specified and directed by the Engineer-in-charge.(01 No. Working + 01 No Stand By)Make:- Kirloskar Brothers/Crompton or equivalent. 88 Supply, install, test and commissioning of LT Panel, indoor type, powder coated, 2.0 mm thick CRCA Sheet, CPRI approved having, IP 43, MS angle iron section of 50X50X6 mm frame, suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with Horizontal copper bus bar for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natural flow of air. The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. The inner shell be made out of 2.0 mm thick CRCA Sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accommodate incomer/outgoing MCCBs/MCBs and metering devices and suitable busbar chamber for passing and connecting UG cables. Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size F class insulators made on non hygroscopic, non combustile, track resistant, high strength FRP/SMC/DMC material at an interval of not more than 300 mm through out the length of the TPN bus bar all as specified and directed by the Engr-in-Charge. andcomprising as under: LT Panel for Pump House. The LT Panel comprising of the following:- 89 Incoming:-MCCB, thermal magnetic release, 4 pole, 415 Volts, 100 Amps, breaking capacity 36 KA- 01 No. Ics =100% IcuMetering Unit:- (a) R Y B Indications (LED Type)- 01 sets(b) Digital Multi function meter - 01 No.(c) CTs - 100/5A, CL-1, 15 VA - 01 set(d) Horizontal Aluminium busbar for 3 phase, 440 volts, 50Hz, 4 wire system of rating 350 Amps for phase and 350 amp for the neutral barOutgoing:-(a) MCB, TPN 40 Amp, 415 Volt, C Curve - 03 Nos.(b) Star Delta starter 12.5 HP, 3 Phase, 415 Volt- 02 Nos.(c) Digital ammeter - 2nos.(d) Single Phase Preventer - 2 nos. 90 M & L Valve chamber of internal size 0.90m X 0.90m X 0.90m (internal dimensions) including excavation of earth work in any type of soil, 150mm thick PCC in 1:4:8 type D2 foundation, brick work in CM 1:6, 15 mm thick rendering in CM 1:4 to internal surfaces and external surfaces upto 150mm depth below GL, PCC 1:3:6 type C1 as in coping, cover with two Nos. of hinges and one No. handle made out of MS round bar 10mm dia with necessary locking arrangement including painting to the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown on drg and as specified. Note:- The quoted rate shall include all earthwork and connected items. 91 M & L Earthing complete with Galvanized steel earth plate electrode of size 600mmX600mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to galvanized iron strip of size 32 x 6 mm size by means of bolts, nuts, check nuts and washers of galvanized iron steel all as shown in Electrical Plate No. 3 connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1 (using 20mm graded aggregates), with 8mm CTD bars @ 100mm c/c in both ways, including necessary form work complete including necessary test on completion all as specified and as directed. 92 EXTERNAL ELECTRIFICATIONM & L for HT/LT MS cable route indicator, engraved the description on the disc not less than 6 dia welded with 40x6xmm MS strip of approx length 90 cm duly painted on the steel parts as per colour code and provision of PCC 1:4:8 type D-2 using 40 mm grade stone aggregate of not less than 0.05 cum in each at base under the ground including necessary earth work and formwork complete all as specified and directed.Note: HT route indicator shall be painted as under:-(i) For HT 11 KV cables - “BROWN”(ii) For LT cables - “BLUE” 93 Supply and fix compact air insulated bus bar trunking system with copper busbar 1600 Amps, 50 KA breaking capacity, IP54 protection, bus duct 1600 A, 415 Volt, capacity sandwich type, Set RYBN complete with accessories such as flange ends, vertical bends, supporting brackets etc from transformer to LT panel board complete all as specified and directed. 94 Supply, install, testing and commissioning of Distribution transformer step-down Level 2 (Previously EE Level 3 before Amendment No 4 to IS 1180), 11KV / 0.433KV, Three Phase complying withIS: 1180/IEC-76(Part-1) 2014 with latest amendments, indoortype double copper wound suitable for 50 Hz system of capacity 800 KVA, oil immersed naturally cooled delta connected on HT side and Star connected on LT side, Vector Group Dyn11, provided with OFF load tap changer to vary secondary voltage from -7.5% to + 7.5 % in step of 2.5 %.Losses should be confined to the limits specified as follows: maximum allowable losses atfull load (100 %) & Half Load (50 %) shall not be exceeded 5838 watts & 2147 Wattsrespectively as per GRlHA RATING, Percentage Impedance: 4.5%. Losses and Impedance are subjected to tolerance as specified in IS 1180. The transformers should be supplied with first filling of oil confirming to IS 335. The transformer should have both side cable end box with neutral brought out complete all as directed by Engineer - in -Charge, and installation of transformer shall be carried out as per IS-10028and comprising with the following standard fittings/Technical specifications:-(a) Lifting lug for transformer and tank.(b) Earthing terminal rating and diagram plate.(c) Air release device.(d) Oil filling inlet pipe with plug.(e) Drain outlet pipe with brass gate valve.(f) Conservator tank with oil level indicator(g) Silica jel breather(j) First fill of oil upto level including conservator tank with fresh new oil conforming to IS335.(k) Type of connection Delta/Star(l) Type of cooling: Oil and Natural Air.(m) Vector group: DYN 11.(n) Temperature rise over an ambient of 50 °C maximum.(o) Cable end box on both side for HT/LT cables of suitable size.(p) Provision of thermometer with pocket.(q) Provision of oil and winding temperature gauge. 95 Supply, install, test and commissioning of LT Panel, Indoor type, powder coated, 2.00 mm thick CRCA Sheet, CPRI approved having, IP 43, MSangle iron section of 50X50X6 mm frame, suitable for 3 Phase 415 volts 50 Hz, AC supply,bus bar chamber with Horizontal copper bus bar for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natural flow of air.The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. The inner shell be made out of 1.6 mm thick CRCA Sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accommodate incomer/outgoing MCCBs/MCBs and metering devices and suitable busbar chamber for passing and connecting UG cables. Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size F class insulators made on non hygroscopic, non combustile, track resistant, high strength FRP/SMC/DMC material at an interval of not more than 300 mm through out the length of the TPN bus bar all as specified and directed by the Engr-in-Charge. andcomprising as under: The LT Panel comprising of the following:- Main LT PanelHorizontal copper busbar for 3 phase, 440 volts, 50 Hz, 4 wire system of rating 1600 Amps for phases and 1600 Amps for Neutral. 96 Incoming:-Incomer:-ACB 4 Pole, 415 V, 50 KA with Thermal Magnetic Release (Manual Draw out type) of capacity 1250 AmpMetering Unit:- (a) R Y B Indications (LED Type)- 1 sets(b) Digital Multi function meter - 01 No.(c) CTs - 1600/5A, CL-1,15 VA - 1 setOutgoing:-(a) MCCB, thermal magnetic release, 4 pole, 415 Volts, 630 Amps, Ics =100% Icu, breaking capacity 35 KA, Ics =100% Icu- 02 No. (For DG AMF Panel & Spare)(b) MCCB, thermal magnetic release, 4 pole, 415 Volts, 400 Amps, Ics =100% Icu breaking capacity 36 KA- 02 No. (for APFC Panel & FPB 2 Near bulk Store) (c) MCCB, thermal magnetic release, 4 pole, 415 Volts, 320/315 Amps, Ics =100% Icu breaking capacity 36 KA- 01 No. (for FPB 1 Near Adm Block) (d) MCCB, thermal magnetic release, 4 pole, 415 Volts, 200 Amps, Ics =100% Icu breaking capacity 36 KA- 01 No. (for Existing Load)(e) MCCB, thermal magnetic release, 4 pole, 415 Volts,125 Amps, Ics =100% Icu breaking capacity 25 KA- 01 No. (for FPB 3 Near Auction Disposal Store)(f) MCCB, thermal magnetic release, 4 pole, 415 Volts, 32 Amps, Ics =100% Icu breaking capacity 25 KA- 03 No. (for MT Complex, Watch tower no 2, Guard room)(g) Digital Ammeter with suitable CT for each outgoing 97 Supply, install, test and commissioning of LT Panel, outdoor type, powder coated, 3.00 mm thick CRCA sheet, CPRI approved having, IP 54, MS angle iron section of 50X50X6 mm frame, suitable for 3 Phase 415 volts 50 Hz, AC supply,bus bar chamber with Horizontal aluminium bus bar 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natural flow of air. The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. The inner shell be made out of 2 mm thick CRCA sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accommodate incomer/outgoing MCCBs/MCBs and metering devices and suitable busbar chamber for passing and connecting UG cables. Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size F class insulators made on non hygroscopic, non combustile, crack resistant, high strength FRP/SMC/DMC material at an interval of not more than 300 mm through out the length of the TPN bus bar all as specified and directed by the Engr-in-Charge. Feeder Panel No.1 (Near Admn bldg) 98 Horizontal Aluminium busbar for 3 phase, 440 volts, 50Hz, 4 wire system of rating 600 Amps for phases and 600 Amps for Neutral.Incoming:-(a) MCCB, thermal magnetic release, 4 pole, 415 Volts, 400 Amps, breaking capacity 36 KA - 01 No. Ics =100% IcuMetering Unit:- (a) R Y B Indications (LED Type) - 1 sets(b) Digital Multi function meter - 01 No.(c) CTs - 600/5A, CL-1,15 VA - 1 setOutgoing:-(a) MCCB, thermal magnetic release, 4 pole, 415 Volts, 200 Amps, Ics =100% Icu breaking capacity 36 KA- 02 No. (for 2nd floor & spare)(b) MCCB, thermal magnetic release, 4 pole, 415 Volts, 160 Amps, Ics =100% Icu breaking capacity 25 KA- 01 No. (for 1st floor)(c) MCCB, thermal magnetic release, 4 pole, 415 Volts, 63 Amps, Ics =100% Icu breaking capacity 25 KA- 01 No. (for G floor)( d) Digital Ammeter with suitable CT for each outgoing 99 Supply, install, test and commissioning of LT Panel, outdoor type, powder coated, 3.00 mm thick CRCA sheet, CPRI approved having, IP 54, MSangle iron section of 50X50X6 mm frame, suitable for 3 Phase 415 volts 50 Hz, AC supply,bus bar chamber with Horizontal aluminium bus bar 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natural flow of air.The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. The inner shell be made out of 2 mm thick CRCA sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accommodate incomer/outgoing MCCBs/MCBs and metering devices and suitable busbar chamber for passing and connecting UG cables.Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size F class insulators made on non hygroscopic, non combustile, crack resistant, high strength FRP/SMC/DMC material at an interval of not more than 300 mm through out the length of the TPN bus bar all as specified and directed by the Engr-in-Charge. Feeder Panel No.2 (Near Bulk Store) Horizontal Aluminium busbar for 3 phase,440 volts, 50Hz, 4 wire system of rating 600 Amps for phases and 600 Amps for Neutral. 100 Incoming:-(a) MCCB, thermal magnetic release, 4 pole, 415 Volts, 400 Amps, breaking capacity 36 KA - 01 No. Ics =100% IcuMetering Unit:- (a) R Y B Indications (LED Type)- 1 sets(b) Digital Multi function meter - 01 No.(c) CTs - 600/5A, CL-1,15 VA - 1 setOutgoing:-(a) MCCB, thermal magnetic release, 4 pole, 415 Volts, 200 Amps, Ics =100% Icu breaking capacity 36 KA- 02 No. (for Equipment Load & spare)(b) MCCB, thermal magnetic release, 4 pole, 415 Volts, 125 Amps, Ics =100% Icu breaking capacity 25 KA- 01 No. (for Bulk Store)(c) MCCB, thermal magnetic release, 4 pole, 415 Volts, 32 Amps, Ics =100% Icu breaking capacity 25 KA- 01 No. (for Watch Tower No. 1)( d) Digital Ammeter with suitable CT for each outgoing 101 Supply, install, test and commissioning of LT Panel, outdoor type, powder coated, 3.00 mm thick CRCA sheet, CPRI approved having, IP 54, MSangle iron section of 50X50X6 mm frame, suitable for 3 Phase 415 volts 50 Hz, AC supply,bus bar chamber with Horizontal aluminium bus bar 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natural flow of air. The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. The inner shell be made out of 2 mm thick CRCA sheet, duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accommodate incomer/outgoing MCCBs/MCBs and metering devices and suitable busbar chamber for passing and connecting UG cables.Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size F class insulators made on non hygroscopic, non combustile, crack resistant, high strength FRP/SMC/DMC material at an interval of not more than 300 mm through out the length of the TPN bus bar all as specified and directed by the Engr-in-Charge. Feeder Panel No.3 (Near Auction Disposal Store) 102 Horizontal Aluminium busbar for 3 phase, 440 volts, 50Hz, 4 wire system of rating 200 Amps for phases and 200 Amps for Neutral.Incoming:-(b) MCCB, thermal magnetic release, 4 pole, 415 Volts, 125 Amps, breaking capacity 25 KA- 01 No. Ics =100% IcuMetering Unit:- (a) R Y B Indications (LED Type) - 1 sets(b) Digital Multi function meter - 01 No.(c) CTs - 200/5A, CL-1,15 VA - 01 setOutgoing:-(a) MCCB, thermal magnetic release, 4 pole, 415 Volts, 100 Amps, Ics =100% Icu breaking capacity 25 KA- 02 No. (for Store Dispatch Complex & Spare)(b) MCCB, thermal magnetic release, 4 pole, 415 Volts, 32 Amps, Ics =100% Icu breaking capacity 25 KA- 03 No. (for Pol store, Auction disposal store, Covered Hard Standing)(c) Digital Ammeter with suitable CT for each outgoing 103 Supply and fixing poly carbonate street light junction boxes IP 66/67 Weather proof suitable for outdoor installation having minimumsize255 x 355 x 122 including suitableCable connecting Terminals, Cable lugs, including provn of one No. MCB SP 6 Amps for operating the street light fittings, Suitable Cable Glands as per site requirement, all as directed by the Engineer-in-Charge. 104 S & F Street light bracket made out of GI tubing 32/40 mm dia, light grade of length1.2 mtr long bend to shape suitable for security light fitting with necessary MS clamp-02 Nos with one coat of anti corrosive primer and two coats of aluminium paint including nut, bolt, washers and 3 core FRLSinsulated sheathed, multistranded copper conductor of size 1.5 sqmm for phase and neutral and 1.5 sq mm for earthing drawn throughthe poles for connection from junction box to light fitting complete etc all as specified.Note: Phase should be Red/Yellow/Blue, neutral should be black and earthing wire should be green in colour. Two runs of cable for phase and neutral and one run of cable for earth will be measured and paid as one unit length. 105 Supply and fixing of LED flood light, 200W, watt 230 V, AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp and made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP protection incl system efficiency >110/120LPW 10KV SPD included Energy saving, environmental friendly and general purpose lighting complete all as specified and directed Engineer-in-Charge. Make : Make : Crompton/Philips/Wipro/Bajaj 106 Supply and fix High Mast Panel outdoor type, suitable to take load up to 6 KW, Conforms to IS/IEC 60947-4-1, Provided with Protection Degree IP 54, Extended wide band (150 Vac - 300 Vac) coil, FRLS (Fire retardant low smoke) Internal wiring, In-built Short-Circuit Protection, Class H Insulation, 3 Phase 415 Volts AC with the following accessories:Phase : 3 Phase, 415 VoltsMax Load Capacity : 6 KWTimer type: AstronomicalContactor Rating : 32 A TPMCB Rating : 63 A TPNMake : Crompton/ Philips/Wipro 107 Supply and laying DWC (Double wall Corrugated) duct pipe outer dia 63 mm and inner dia 50 mmconforming IS 16205 (Part 24 ) for protection ofelectric cable complete all as specified and directed. ( for 10 sqmm St light cable & 16 Sqmm cable) 108 AVIATION OBSTRUCTION LIGHTSupply and fix aviation obstruction light integral aviation light comprising of aluminium housing with polycarbonate enclosure, 240 volt with timer switch and one No.10 A, MCB, SPN 230 V with fixed enclosure complete all as specified and directed by Engineer-in-charge.Make:- Bajaj cat No BGAV 302 LED or equivalent in Philips/Crompton/Surya 109 INCINERATORSupply, fixing and testing and commissioning of Solid waste Electric Incinerator, single chamber type having a combustion chamber supported with electric coil for generating sufficient heat to burn 100Kg/hr solid waste, retains and re-burns the exhaust gases for minimum of 2 seconds at 850°C, Stainless steel stack for longevity, fitted with a Velocity Cowl as standard, Chamber designed for maximum air flow and circulation which in turn improves efficiency and total burn time, easy to open and close loading door, designed to increase operator safety, steel cladding to reduce risk of infection and increase longevity of system with working temperature not less 450 degree Celsius mounted on foundation as recommended by OEM including electrical control panel with suitable size MCCB, relays & contactor recommended by OEM complete all as complete all as specified and directed.Note:(a) The electrical works including electrical LT panel, internal wiring of the LT panel, suitable size copper wires from panel to Solid waste Electric Incinerator as recommended by OEM to operate the Solid waste Electric Incinerator of capacity 100 Kg/Hr to make Solid waste Electric Incinerator operational is deemed to be included in the rate quoted. (b) All Electrical works shall be carried out as per relevant BIS/lS equivalent standard norms only and also in accordance with the latest edition of the Indian Electricity Act / rules formed there under and as amended from time to time.(c) Any other works (mechanical, electrical & Civil) connected to installation, testing & functional requirement of Solid waste Electric Incinerator of capacity 100 Kg/Hr all as mentioned above and which is not mentioned or included in this Schedule but required at site necessary shall be carried out by the contractor and quoted rate shall deemed to included for the same.(d) Foundation/Plinth/Base: shall be provided as per manufactures recommendations, however minimum 0.5m space should be available all around the Solid waste Electric Incinerator and height of plinth shall not be less than 0.5 MMake: Precitech thermal Pvt. Ltd., Rram Buisiness corp, Alfa therm Ltd., Thermax Ltd, Kanti Industries, Fortec 110 Supply & fixing MCCB, thermal magnetic release, 4 pole, 415 Volts, 200 Amps, breaking capacity 36 KA- 01 No.Ics =100% Icu with Sheet metal enclosures fixed properly at directed location and connecting/testing complete all as directed. 111 ELECTRIC SIRENSupply and fixing Sirens Electronic type Horizontal Double Mounting Three Phase 400/440V, 2800 RPM 50 C/s Flame Proof, audible range 3.5 Km, 2 HP, continuous normal operation for at least 50 minutes with on/off system complete all as specified and directed. 112 Supply and fix advance Sirens controller Electronic type suitable to operate on 3 phase, 415 volt AC 50 Hzcomplete all as specified and directed. 113 Supply & fixing MCCB, thermal magnetic release, 4 pole, 415 Volts, 63 Amps, breaking capacity 25 KA- 01 No.Ics =100% Icu with Sheet metal enclosures fixed properly at directed location and connecting/testing complete all as directed. 114 SOLAR POWER PLANTDesign, supply, installation testing and commissioning of roof top solar photovoltaic power plant (ON-GRID) on roof top of existing bldg of capacity 150 KWp, power evacuation at 415 Volt 3 phase system all as per guidelines/norms issued by MNRE & Indian Metrological Deptt approved Solar Radiation Data viz Direct Normal Irradiance, Global Horizontal radiance etc complete comprising with the following Solar Photo Voltaic Plant.(a) Design, supply, installation, testing and commissioning of Solar PV Modules capable of generating 150 KWp (AC) electricity at 415 Volt 3 phase system. These Solar PV Modules of 540 watt PERC with a modular efficiency of 17-19.84% as per IEC and MNRE standard or as per approved design parameters with Poly/Multi Crystalline Silicon Solar cells of minimum wattage of 540 watt with minimum 144 cells & efficiency not less than 17 -19.84%, conforming to IEC 61215, IEC 61730, IEC 61701. Solar PV Module should be of approved Indian Brand only and Qualify under the Domestic Content requirement (DCR) norms of NVVN/SECI and testing requirement fixed by MNRE. The PV modules shall be warranted for a period of minimum 25 years, Solar PV modules used in system shall be warranted for their output peak watt capacity, which should not be less than 90% at the end of Ten years and 80% at the end of Twenty Five years. Each Solar PV Module must use RF identification tag. The following information must be mentioned in the RFID used in each module:Name of manufacture of PV module, Name of manufacturer of Solar cell, Month & year of manufacturer (for solar cell and module), Country of origin (lt is mandatory to use cells and modules manufactured in India). I-V curve of the module, Wattage, LM, V-M, & FF for the module, Unique Serial No & Model No of the module, Date & year of IEC PV qualification certificate, Name of the test lab issued IEC certificate. The PV modules used in the solar power projects must qualify to the latest edition of the following International Electro technical Commission (IEC) P module qualification test or equivalent BIS Standards. The PV module must be tested and approved by one of the IEC authorized test centres. 115 (b) Material and labour for Module Mounting structure (MMS) fabricated from hot dip galvansied iron section of suitable size with specified tilt angle according to site requirement & optimum angle to achieve maximum benefit of solar energy and suitable to withstand 180 Kmph wind speed all as per approved design parameters as per MNRE standards and to match with the existing site conditions. Necessary roof treatment to avoid any seepage in future shall be done by the Contractor and the amount included in the rate quoted. The roof tiles shall be dismantled and refixed back in original position. Structure shall be built with brick masonry basement of adequate size as per direction at site including all necessary civil work required for the foundation.(c) Supply, laying & Testing of DC cable minimum size 4/6sq mm multi stranded copper conductor, conforming to relevant IS, weather proof UV resistant with operating temperature up to 120 degrees, minimum rated voltage 1100 volt for inter connection of SPV Modules to array junction box including suitable size of cable lugs, male & female MC4 connectors & joints etc.(d) Supply, installation test and commissioning of protection devices MCCB 400 A, isolator and three phase 4 wire LT energy meter, array junction boxes having rating 150 KWp with over voltage protection and surge protection.(e) Supply, installation, test and commissioning of Grid tie Solar Power conditioning unit / inverter of minimum capacity 150 KWp(DC to AC 415 V in Three phase system) all as per approved design parameters & capable of generating output voltage 415 V AC at rated load condition with efficiency not less than 98 %, conforming to IEC 600682-2 NDE standards with power reduction, LVRT with protections for anti-islanding, Ground fault monitoring, Grid Monitoring, AC & DC Over voltage and under voltage protection, AC & DC short circuit lover current protection and DC reverse polarity protection, graphic display etc. all as specified and as directed.(f) Material and labour for Earthing for Lightning protection for SPV modules etc as per IE rule, MNRE guide line & BIS all as per approved plan complete with galvanised earth plate electrode 600x600x6 mm thick buried directly in ground vertically (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to and including Gl strip 32x6mm size protected with Gl medium grade pipe 40mm dia for earth electrode up to test point by means of GI nuts, bolts, check nuts and washers including earth work excavation, PCC (1:3:6) type Cl pit and RCC cover ( 1:2:4) type Bl and funnel, with necessary charcoal, salt etc complete. 116 (g) Supply and fixing aluminium strip of size 25 x 3mm thick for roof / down conductor fixed on insulators/ saddles of suitable size for SPV modules lightning protection upto interconnection between Roof top LA to Ground Earthing system. (h) AC Cable: Supply and laying of 150 Sqmm LT XLPE insulated, screened PVC bedded, sheathed with multi-stranded aluminium conductor armoured with galvanised steel wire 1100 volts grade heavy duty conforming to IS 150 Sqmm x 3.5Core as per site requirement.Note (i) :-(a) Before quoting the bid, Contractor or his authorised Engineer/consultant must visit the proposed site to study the site condition.(b) Before commencement of work, contractor shall submit drawings & lay out plan with scale including required qty to Accepting Officer for approval.Note(ii):-(a) The mechanical structures, electrical works and overall workmanship of the Grid solar power plant must be warrented for a minimum of 5 years.(b) All Mechanical, Electrical works shall be carried out as per relevant BIS/lS equivalent standard norms only and also in accordance with the latest edition of the Indian Electricity Act / rules formed thereunder and as amended from time to time.(c) Any other works (mechanical, electrical & Civil) connected to installation, testing & functional requirement of solar photovoltaic power plant of capacity 150 KWp (AC) all as mentioned above and which is not mentioned or included in this Schedule A but required at site necessary shall be carried out by the contractor and quoted rate shall deemed to included for the same(d) Contractor shall provide adequate Spares/items required for minimum period of 1 year maintenance including DC & AC items under scope of work.Note (iii) : Design report shall be submitted before execution of Work at site by the contractor toGE for his scrutiny / comments and futher submitted to AO for obtaining approval. 117 DG SETSupplying, installing, testing and commissioning, factory assembled silentDiesel Engine driven generator set, fully wired alternator AC to give an out put of 400 KVA continuously rating at a power factor 0.8 lagging, 3 phase 4 wire, 415 volts 50 Hzsupply, 1500 RPM, directly coupled with diesel engine liquid cooled mounted on common base frame complete with floor mounting fuel tank (service tank) of adequate capacity with fuel line & accessories, PCC foundation work as per manufacturers instructions, vibration damper pads, control panel & other accessories etc and comprising of following.(a) Diesel Engine: Liquid cooled turbo charged with after cooler to deliver suitable BHP at 1500 RPM under NTP conditions of BS 5514 and conforming to IS 10001/ 10002, DIN 6271 & ISO 3046 with an overload capacity of 10% for one hour in any 12 hours continuous operation with the following accessories: Diesel engine of rated speed at full load electric start developing with system with radiator and including electronic governor control of class A1, engine control panel, lub oil pump, water pump, fuel tank, exhaust pipe with silencer and suitable for electric start with batteries ofadequate capacity and suitable for alternator of specified capacity complete with fly wheel direct/flexible coupling and coupling guard complete.(b) Radiator with blower fan or heat exchanger with guard.(c) Pipe coupling for engine cooling system piping.(d ) Corrosion inhibitor coolant(e) Paper element filters(i) Fuel filter(ii) Lube oil filter(iii) By pass(f) Fly wheel housing and fly wheel to suit alternator.(g) Engine bearing mechanism in fly wheel housing.(h) Shut off coil with safeties for LLOP/HWT/over speed.(i) Dry type air cleaners and vacuum indicators.(j) Residential silencers.(k) Stainless steel exhaust flexible bellows. 118 (l) Battery charging alternator.(m) Exhaust piping made out of STIC C class, MS pipe inclusive of all accessories and hardware, necessary supports scaffolding as per manufacturers recommendations to sustain back pressure with rain cap.(n) Mineral wool insulation 2 inch thick suitable for 400 degree Celsius temperature cladded with aluminium sheet of30 gauge for the entire length of exhaust pipe.(o) First fill of oil, coolant and diesel during commissioning and 12 hours testing.(p) Interconnecting copper cabling of adequate capacity batteries control.(q ) Fuel pipe class STIC 1 /1.5 /2 dia - 01 lot(r) Self starter 24 volts DC.(s) Electric operated electronic governor.(t) Fuel injection pump.(u) Electronic instrument panel, complete with all accessories as per manufacturers specifications displaying the following:-(i) 12vx2 nos -24V Battery. (ii) Water temperature.(iii) lubricating oil pressure.(iv) Engine speed -1500Rpm(v) Engine hours(vi) Frequency.(vii) Voltage.(v) Safety control (Trip and indication).(i) High water temperature(ii) Low lube oil temperature(iii) Overspeed stop 119 (w) Base frame: Sturdy, fabricated welded construction, channel iron base frame (duly painted) for mounting engine and alternator as per manufacturers design alonwith AVM pads.(x) Battery:-24 volts(2x12v Battery) DC, 180AH, maintenance free battery conforming to IS:14257 with leads & terminals (Make- Excide/Amron).(y) Fuel tank:12 hrs. full load diesel storage capacity fuel tank with mounting brackets factory made of 5mm thick HR/MS sheet with level indicator fuel inlet, fuel outlet, air vent, drain plug, inlet arrangement for diesel filling for exterior canopy (without opening its panel) etc complete all as specified and directed.(z) Isolator panel with 630 amp MCCB(aa) Auto logic panel for automatic stat(ab) Alternator: Alternator suitable rated for 400 KVA, 0.8 pf , 415 volts, 3 phase, 4 wire, 50 Hz at 1500 RPM, self excited and self regulated with AVR brushless, screen protected, drip proof, insulation class-H, IP -23, voltage regulationgrade - VG 3 self ventilated and conforming to BS: 5000 / IS: 4722 suitable for engine as mentioned here-in before, conformig to IS: 13364(part-1)Make: KOEL GREEN / stampford/crompten/kirloskar/Greaves(ac) Acoustic Enclosure:- M & L for acoustic enclosure for the above 400 KVA DG set to reduce noise level to 75 dB measured at 1.0 meter distance for audible frequencies as per guide of Central Pollution Control Board andmanufacturers specification and comprising of following from authorised GOEMs of Gen Set manufacturers specified :-(i) Sound insulation : 100mm thick Rock wool (Density 64 Kg/Cum).(ii) Outer body : 1.6mm thick CRCA(iii) Door : 1.6mm thick CRCA(iv) Base frame : ISMC 300(v) Inside illumination : 1 No.- 1 x 18 watt LED fitting of make Phillips/ Bajaj/ Crompton.(ad) AMF Control panel:- Factory fabricated cubicle type, free standing, floor mounted, indoor type, IP-43, AMF control panel, provided with removable rear panels & hinged front panel for easy accessibility, fabricated out of not less than 2.0mm thick CRCA sheet including two coats of powder coated paint over a coat of red oxide primer etc and comprising of following: 120 (ae) AMF control circuit with 4 pole MCCB 630 Amps - 2 nos, with ultimate breaking capacity Icu-50 KA at 415 volts and microprocessor release conforming to IEC 60947 Part-I with breaking capacity Ics=Icu at 415 volts , thermal overload setting 70% to 100%, short circuit setting 5 to 10 times-02 Nos. for main supply & DG set supply with HRC back up fuse complete with all DC control relays/ Line voltage monitor (LVM) as per OEM specifications incorporating motorised stored energy operating Engine start, stop, three attempt starting facility and failure to start etc.(af) Digital load manager : Three phase 4 wire indicating V,I,PF, KVA, KW, F of Enercon make with serial communication port model No. EM6400 with class 1.0 accuracy meter or equivalent make suitable rating of CT per phase- one No.(i) Indication lamp R, Y, B with 3 Nos. of 2A HRC fuses-10 sets.(ii) Bottom gland plate for incoming and outgoing cables.(iii) Circuit diagram plate.Note:- DG set should be as per CPCB- 4 latest norm wef 01 July 2023 of National Clean Air programme (NACP) Act 1981.The contractor shall procure the item within the period given by CPBC in case of revision in CBPC norms. Nothing extra will be paid on account of delay from the part of contractor. DG set shall have an exhaust with stack height of minimum 2m from the top of generator with a cowl. Smoke released from the exhaust of the DG sets indicating that emission parameters are within permissible limits, as prescribed by CPCB, demonstrating compliance with emission limits prescribed by CPCB 2016. 121 Supply, install, test and commissioning of LT Panel, Indoor type, powder coated, 2.00 mm thick CRCA Sheet, CPRI approved having, IP 43, MS angle iron section of 50X50X6 mm frame, suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with Horizontal aluminium bus bar 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natuaral flow of air. The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. The inner shell be made out of 1.6 mm thick CRCA Sheat duly compartmentalised for each control gear with louvers and air vent gasket for natuaral flow of air and suiatable provision to accomodate incomer/outgoing MCCBs/MCBs and metering devices and suitable busbar chamber for passing and connecting UG cables.Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size F class insulators made on non hygroscopic, non combustile, track resistant, high strength FRP/SMC/DMC material at an interval of not more than 300 mm through out the length of the TPN bus bar all as specified and directed by the Engr-in-Charge. Feeder Panel No.1 (DG Panel ) 122 Incoming:-(a) MCCB, thermal magnetic release, 4 pole, 415 Volts, 630 Amps, breaking capacity 36 KA - 01 No. Ics =100% IcuMetering Unit:- (a) R Y B Indications (LED Type) - 1 sets(b) Digital Multi function meter - 01 No.(c) CTs - 800/5A, CL-1,15 VA - 1 set(d) Horizontal aluminium bus bar for 3 phase 440 V, 50 Hz, 4 wire system of rating 800 Amps for phases and 800 Amps for neutralOutgoing:-(a) MCCB, thermal magnetic release, 4 pole, 415 Volts, 400 Amps, Ics =100% Icu breaking capacity 36 KA- 03 No. (for Package AC Bulk Store, pump house and fire pump & spare)(b) MCCB, thermal magnetic release, 4 pole, 415 Volts, 160 Amps, Ics =100% Icu breaking capacity 25 KA- 01 No. (for Pump House & Fire Pump)(c) MCCB, thermal magnetic release, 4 pole, 415 Volts, 80 Amps, Ics =100% Icu breaking capacity 25 KA- 01 No. (for Incianator)(d) MCCB, thermal magnetic release, 4 pole, 415 Volts, 32 Amps, Ics =100% Icu breaking capacity 25 KA- 07 No. (for Terrace pump 1, Terrace pump 2, Power House, High mast 1, High mast 2, Street Light)(e) Digital Ammeter with suitable CT for each outgoing(f) Astro Time switch for 3 phase 20A- 1 No(g) 3 Phase Power contactor 20 amps, with 230 coil 123 SEWAGE DISPOSALM & L for laying of DWCPE sewage pipes line 200 mmdia borepipe sftiffnessclass SN 8 includingsealing of joints fittings etc complete with collers complte all as spcified and directed 124 M & L for laying of DWCPE sewage pipes line 150 mmdia borepipe sftiffnessclass SN 8 includingsealing of joints fittings etc complete with collers complte all as spcified and directed 125 COMPOUND WALLS & F Concertina Coil of 600/700 mm outer dia made out of 2.60 mm dia spring steel wire dipped in corrosion preventive fluid (rusilo 901) of castrol make each coil having min 50 turns (circles) covering 6 m and an average weight not less than 8.57 Kg (plus or minus 5 %) incl handle and spike at both ends of coil erected in position on top of mild steel angle by fixing with 1.70 mm GI wire for securing, coil with fish hook bars, incl necessary welding to MS Sections etc all as specified and directed. 126 GREEN BUILDING NORMS(GRIHA CONCEPT)Supply and Install Organic Waste Converter fully automatic having capacity 50Kg/day, having internal tank made of high quality stainless steel while external panels are powder coated for enhanced product life with necessary electric control panel, cabling necessary civil works for installing machine etc with following requirements:-Type of machine: Fulley automatic in-vessel composterComposting method: 24 Hrs. Micro-organisms-based compostingmachine Type of microganism used: Heat resistant thermophilic bacteria Final Output: Dry organic Soil conditioner/Soil supplementsCycle time: 24Hrs Volume reduction in 24Hrs: 80-85% Internal tank: Stainless steel type Main agitator Shaft: Stainless steel type Input voltage: 415VSpecial features: VFD as standard across all models, Touchscreen standards Daily waste processing: 150Kgs Rated capacity: 7KWPower consumption (KWH par cycle): 13-15Length: 1650, Width: 850,Height: 1455 127 Supply, installation, testing and commissioning Three phase energy meter with the following specifications: Microprocessor based three phase, smart electricity meter, equipped with a bi-directional cellular (NB-IoT) communication that allows it to interact with the head end system (HES) for data collection and configuration with adequate security including electronic static pre paid cum postpaid energy meter rating 415 Volts, 50 Hz of range 10-100 Amps, complying to IS16444:2015 (reaffrimed 2020) and conforming to IS 3779 with LED display and parameters like Voltage, Current, Frequency, Power, Power factor, KWH/KVA, default in built dual source, inbuilt long range (LORAWAN) Communication suitable for outdoor LoRa data accumulator and also compatible for Prepaid and Postpaid online energy monitoring billing system with disconnection /reconnection through remote software / data export to ERP complete with 5 Years warranty.Note:(a) The Energy Meter to be capable of running in both prepaid and postpaid mode.(b) The meters to carry 5 year warranty. (for entire system) 128 Supplying, Fixing, Commissioning and testing of configuration of cloud Hosted multi user web based software with following modules:(i) Head End System (HES): to acquire meter data automatically from DCU sand monitor parameters acquired from meters.(ii) Meter Data Management ModuleThe meter data management module would be responsible for collecting the data from the data concentrator and make the data available to the billing system. The system would support offline meter(a) 30 min instantaneous data from all the meters for seven parameters Cumulative Energy. Cumulative Apparent Energy (as applicable), Power, Current, Voltage, Power Factor and Frequency(b) Monthly billing survey data for cumulative energy and max demand(iii) Billing Module: The billing module would collect the data from the meter data management module, calculate the energy consumption, calculate billing determinant and make energy data/billing data available to admin and end users. The billing module would include functionalities for tariff setup, bill format setup, bill adjustment, occupation billing and vacation billing. It would allow postpaid and prepaid functionality as required.(iv) Occupation and Vacation Module: The system would support occupation/vacation based on the unit catagories. The system would support automatic data capture on occupation and vacation events.(v) Website: There would be a dedicated website forAGE/GE and BSO team to view all the data and information alongwith customer portal for use of customer. The designated users in MES would have the admin access to the application. The MES Staff would also have the access to the key information on mobile App (AndroiandiOS based) for admin use complete all as specified and directed.(vi) Customer Module: The system would include a customer portal for the resident/occupants to login and view their own energy /billing data and recharge facility. There shall be consumer App (Android and iOS based) also to log in and view their own energy/billing data and recharge facility.(vii) Communication Module :The system would provide communication of energy data and bills via print, email and sms methods. 129 (viii) Meter Master Data: The system would support meter data repository. The system would support meter replacement process.(ix) Excel Export: the system would support export of metering and billing data in excel and pdf format.(x) Energy Accounting module: The system would include features of energy accounting, the system would to able to account for total energy block wise, facility wise and would also allow calculations of the unaccounted energy in case total energy meter is also available.(xi) Prepayment/Recharging Facility:The system should periodically monitor the energy consumption of prepaid consumers and decrease the available credit based on the consumption. The system should allow online/digital recharging through consumer App (Androidand iOSbased) and Web portal. The configuration and necessary arrangement for payment gateway and E-MRO facility shall be deemed to be included in the quoted rate. The system should sendconnect/disconnect command on the basis of available credit.Low credit alarm: The system will give an alarm over the consumer App and SMS to the registered mobile number in case the credit in the meter goes down be low apredefined limit.Emergency credit: The meter will work even when the credit falls down to zero to prevent disconnection. This limit shall be configurable. The system should support happy hours inorder to prevent disconnection in non working hours and on holidays. The Happy hours should be configurable complete all as specified and directed. 130 Supply, Installation, Testing and Commissioning of DCUs/Gateways and the arrangement of Sim cards or Internet to enable reliable medium for two-way communication between Smart Meter & HES. The data acquisition (Push/Pull) frequency shall be, configurable. It shall push events such as tamper, power off etc. to HES immediately on occurrence/receipt from meters. It shall have provision for the cellular, WiFi and Ethernet communication for the backhaul to HES. It shall be capable to handle data of minimum 1000 Nos. of any type of smart meter (1ph/3ph).It shall be able to communicate with the nearest meters at a distance of at least 500 m, depending on topographical features. Communication of the nearest meters with other meters shall be established through appropriate mesh formation. RF Mesh shall support self-forming and self-healing features. The equipment shall be weather proof and dust proof (minimum rating: IP54 for indoor and IP65 for outdoor installation). It shall have rechargeable battery with backup for 1(one) hour for normal meter reading, to push tamper event, carry out on demand reading, etc complete all as specified and directed. 131 Hosting GPRS (4G) charges for Gateway for five years from the date of completion F Including 2 years waranty and 2 years Maintinance after warranty) Make:-Airtel/Jio/Vodafone 132 Supply and installation of digital Water flow meter 50mm suitable for domestic and commercial applications complete all as specified and directed. 133 Supply and installation of digital Water flow meter 40mm suitable for domestic and commercial applications complete all as specified and directed. 134 ARBORICULTUREM & L for excavation of pits size 30cm x 30cm x 30cm in loose soil and filling the pit with mixture of river sand and approved top soil in the proportion of 1:3 mixed with 30% of cow dung powder, 100gms of bone meal and 100gm of neem cake powder 135 All as per item No 13.121 above but pit size 60cm x 60cm x 60cm 136 Supplying and planting red palm or royal palm healthy sapling having 45cm height and shall have a minimum height of 65cm after 6 months 137 Supplying and planting coconut tree healthy sapling having 75cm height and shall have a minimum 95cm after 6 months. 138 Supplying and planting flower plants(Champa/ hybrid hibiscus/ Hybrid west Indian Jasmine/ Hybrid Plumeria white plant/ Panama yellow plant/ Oleander) healthy sapling having 10cm minimum height and shall have a minimum 25cm to 30cm height after 6 months. 139 Supplying and planting phylanthus healthy sapling having 15cm to 30cm height and shall have a minimum 45cm height after 6 months. 140 Supplying and planting bougainvillea colour flower plants healthy sapling having 15cm to 30cm height and shall have a minimum 45cm height after 6 months. 141 Supplying and planting song of India flower plants healthy sapling having 15cm to 30cm height and shall have a minimum 45cm height after 6 months. 142 Supplying and planting dracaena flower plants healthy sapling having 15cm to 30 cm height and shall have a minimum 60cm height after 6 months. 143 Supply and planting mexican grass including providing manure as directed. 144 PILE FOUNDATIONBoring 450 mm dia piles to any depthin any type of soil/ strata by anyapproved method, complete all as shown on drawings and as specified anddirected.Note:- The quoted rate shall include for mobilization and demobilisation of piling equipment, making approaches to site or point of pile boring if necessary. Nothing extra shall be paid on this account. 145 Boring for bored cast in situ pile 600 mm dia to any depth through any type of soil / strata, using DMC method (Direct Mud Circulation)and getting out & disposal of spoil to any distance outside of MD land , complete all as specified and as directedby the EngineerIn Charge 146 M & L Reinforced cement concrete of grade M-35 design mix (RMC) as per IS-456using 20 mm graded stone aggregate in cast in situ DMC bored pile of any length / any sectionscomplete all as specified and as shown on drg 147 M & L Reinforced cement concrete of grade M-35 design mix (RMC) as per IS-456using 20 mm graded stone aggregate in pile caps / grade beams complete all as specified and as shown on drg 148 Providing TMT bars (CRS/HCRM/CRM) in reinforcement 10 mm dia and over for bored cast in situ piles of any length and any dia all as shown on drgs including cut to length, bend to required shape, cranking/hooking ends if necessary and binding with and including 0.9mm dia MS wire (annealed) or welding so as to secure the bar firmly in position/ required shape complete all as specified and shown on drgs (Fe-500D). 149 Providing TMT bars (CRS/HCRM/CRM) in reinforcement 10 mm dia and over for pile caps and grade beams, cut to length, bent to shape required, hooking ends and binding with and including 0.9mm dia MS wire (annealed) or welding so as to secure the bar firmly in position/ required shape complete all as specified and shown on drgs (Fe-500D). 150 All as per item No 13.136 here-in-before but5mm dia and over upto and including 10mm dia as in helicals for piles and stirrups for grade beams complete all as specified and directed. 151 M & L for providing PCC (1:4:8) type D-2 using 40 mm graded stone aggregate for concrete layer below pile caps foundation complete all as specified and directed. 152 Formwork to sides of pile caps/ grade beams and similar work, rough finished surface of concrete flat all as specified and as directed. 153 M & L for carrying out non destructive integrity test all as per IS 2911 (Part 4) 2013 for 600 mm dia cast in situ piles including mobilising and removing the testing equipments from site after testing is completed all as specified and directed. 154 M & L for carrying out non destructive integrity test all as per IS 2911 (Part 4) 2013 for 450 mm dia cast in situ piles including mobilising and removing the testing equipments from site after testing is completed all as specified and directed. 155 M & L for carrying out Initial Load test (vertical load test) cast in situ piles of 600 mm dia as per IS 2911 (Part 4) 2013 including mobilising and removing the testing equipments from site after testing is completed all as specified and directed.(Note :- Providing and installing test piles shall measured and paid separately) 156 M & L for carrying out Initial (lateral load test) cast in situ piles of 600 mm dia as per IS 2911 (Part 4) 2013including mobilising and removing the testing equipments from site after testing is completed all as specified and directed.(Note :- Providing and installing test piles shall measured and paid separately) 157 M & L for carrying out Initial load test (pull outtest as per design load) of cast in situ piles of 600 mm dia as per IS 2911 (Part 4) 2013including mobilising and removing the testing equipments from site after testing is completed all as specified and directed.(Note :- Providing and installing test piles shall measured and paid separately) 158 M & L for carrying out Routine load Test (Vertical load)all as per IS 2911 (Part 4) 2013 for 600 mm dia cast in situ piles including mobilising and removing the testing equipments from site after testing is completed 159 Testing of piles Initial load test (verticle load test) for 450mm dia cast in situ bored piles all as per IS including removing the testing equipments from the site after testing is completed all asspecified and as directed 160 M & L for carrying out Initial Load test (lateral load test) cast in situ piles of 450 mm dia as per IS 2911 (Part 4) 2013 including mobilising and removing the testing equipments from site after testing is completed all as specified and directed.(Note:- Providing and installing test piles shall measured and paid separately) 161 M & L for carrying out Initial load test (pull outtest as per design load)of cast in situ piles of 450 mm dia as per IS 2911 (Part 4) 2013including mobilising and removing the testing equipments from site after testing is completed all as specified and directed.(Note :- Providing and installing test piles shall measured and paid separately) 162 M & L for carrying out Routine load Test (Vertical load)all as per IS 2911 (Part 4) 2013 for 450 mm dia cast in situ piles including mobilising and removing the testing equipments from site after testing is completed
Contract Date: Feb 11, 2026 Contract Value : ₹ 59.27 Crore
Statutory Bodies & Commissions/Committees No of Bidders 7
Kerala View Result →
26.
Health and Family Welfare #9321540 Technical Bid
Cath Lab Items Purchase Of Medicines / Items Required For Cath Lab-2 Des, Everolimus, Fda Approved Platinum Chromium Platform 3 Des, Everolimus, Fda Approved Platinum Chromium Platform Poly-Vinylidene Fluoride-Hexafluoropropylene ( Pvdf-Hfp ) Polymer 4 Des, Everolimuseuluting , Fda Approved.Cto Stentcobalt Chromium Platform .Stent Length 2.25Mm To 4.25Mm Diameter 5 Des, Everolimus, Fda Approved Platinum Chromium Platform, Bioabsorbable Polymer Plga 6 Des, Everolimus, Fda Approved Cobalt Chromium Platform Stent Length From 12 Mm Upto 38Mm 7 Des, Everolimus Hypotube Balloontechnology, Fda Approved Cobalt Chromium Platform Stent Length Up To 48Mm 8 Des, Everolimus, Fda Approvedcto Stent Cobalt Chromium Platform, Fluoropolymer , 2.25Mm-4.25Mm Diameter 9 Des, Everolimus, Only Dcgi Approved, Cobalt Chromium Platform, 50 Micron Strut Thickness 10 Des, Everolimus, Only Dcgiapproved Cobalt Chromium Platform With 55 Micron Strut 11 Des, Everolimus, Only Ce Approvedcobalt Chromium Platform With65 To 70 Micron Strut 12 Des, Everolimus, Only Dcgiapproved, Cobalt Chromium Platform With65 To 70 Micron Strut 13 Des, Everolimus, Onlyce Approved Cobalt Chromium Platform With 60 To 65 Micron Strut 14 Des, Everolimus, Only Dcgiapproved Cobalt Chromium Platform With 60 To 65 Micron Strut 15 Des, Everolimus, Only Dcgiapprovedcobalt Chromium Platform With 60 Micron Strut 16 Des, Everolimus, Only Dcgi Approved, Cobalt Chromium Platform 17 Des, Everolimus, Ce / Fda / Dcgi Approved Cobalt Chromium Platform Biodegradable Polymer Strut Thickness 56-60Microns With Cumulative Drug Release Technologylength:8 To 48, Size;2To 4.5Delivery System 140 Cm 18 Des, Everolimus, Ce / Fda / Dcgi Approved Cobalt Chromium Platform Biodegradable Polymer, 60 Micron Strut With Z Link Technology And Tetrinium Design With Cumulative Drug Release Technology: Length: 8-48, Sizes:2, -4.5 19 Dcgi Approved Everolimus Drugeuluting 65 Micron Strut Thicknesswith 3 Micron Plla&Plga. Biodegradable Polymer Stent With Open Cell Designedcobalt Chromium .Stent With Length From 8 Mm To 48 Mm And Diameter From 2.25 Mm To 4.50Mm. 20 Dcgi Approved Biodegradable Polymer Based Everolimus Eluting Coronary Stent System With Differencial Stent Architecture Of 6 Crown Design For 2 - 2.75 Mm , 8 Crown For 3-3.5 & 10 Crown Design For 4-4.5 Mmlength : 8 Mm , 13 Mm.16, 19, 24, 29, 32, 37, 40, 44, 48. Diameter : 2, 2.25, 2.5, 2.75, 3, 3.5, 4, 4.5 21 Ce Approved Sirolimus Drug Eluting 65 Micron Strut Thicknesswith 3 Micron Plla&Plga. Biodegradable Polymer Stent With Open Cell Designed Cobalt Chromium . Length From 8 Mm To 52 Mm And Diameter From 2.25 Mm To 4.50 Mm 22 Ce Approvedsirolimus Drug Eluting 65 Micron Strut Thicknesswith 3 Micron Plla&Plga. Biodegradable Polymer With Open Cell Designedcobalt Chromium . Length From 8 Mm To 48 Mm And Diameter From 2.25 Mm To 4.50 Mm 23 Dcgi Approved Everolimus Drug Eluting 65 Micron Strut Thicknesswith 3 Micron Plla&Plga. Biodegradable Polymer Stentwith Open Cell Designedcobalt Chromium L605 Stent. Length From 8 Mm To 52 Mm And Diameter From 2.25 Mm To 4.50 Mm 24 Des, Everolimus -Biodegradable And Biocompatible Polymer, Size: 2.25 ( Mm ) To 4.5 ; Stent Length 8 To 48 ( Mm ) 25 Des, Everolimus, Cobalt Chromium Platform With 63 Micron Strut, Biodegradable, Biocompatible Polymer, Hybrid Open And Closed Cell Structurelength: 2.25 - 4Mm, Diameter: 8 - 44Mm Ce Approved 26 Des, Sirolimus, Cobalt Chromium Platformwith 65 Micron Strut ( 0.025Mm ) , Biodegradable Polymer, Hybrid Open And Closed Cell Structure, Variable Strut Width Length: 2.25 - 4Mm, Diameter: 10 - 40Mm Ce Approved 27 Ce Approved Sirolimus Eluting L605 Cobalt Chromium Coronary Stent With Fda Approved Biodegradable Polymers 9 Crown Open Cell Design With 3 Interlinks Per Segment, 65Micron Strutthickness, 1.4Micron Sirolimus Drug, Diameter 2.25Mm , 2.50Mm, 2.75Mm, 3.00Mm, 3.25Mm, 3.50Mm, 4.00Mm And Length 8Mm, 10Mm, 13Mm, 16Mm, 18Mm, 23Mm, 28Mm, 33Mm, 38Mm, 43Mm, 48 Mm 28 Ce Approved Biodegradable Polymer Based Sirolimus Eluting Coronary Stent System With Differential Stent Architecture Of 6 Crown Design For 2 - 2.75 Mm , 8 Crown For 3-3.5 & 10 Crown Design For 4-4.5 Mmlength : 8 Mm , 13 Mm.16, 19, 24, 29, 32, 37, 40, 44, 48. Diameter : 2, 2.25, 2.5, 2.75, 3, 3.5, 4, 4.5 29 Dcgi Approved Des, Everolimusstent System With Cobalt Chromium Platform;65 Micron Strut Thickness Size: 2.25-4.5 Length: 8 To 48 Mm 30 Des , Evorolimus Cobalt Chromium, Biodegradable Polymer, Dcgi Approved, 65 Micron Struts With Open & Closeddesign, Size 2.25 -4 Mm , Length -10 - 44 Mm 31 Des, Biolimus, Fda Approved Cobalt Chromium Platform 32 Des, Biolimus, Ce Approved Cobalt Chromium Platform 33 Des, Biolimus, Only Dcgi Approved Cobalt Chromium Platform, 60 Micron Strut Thickness 34 Des , Biolimus , Fda / Ce Approved Cobalt Chromium Platform Biodegradable Polymer Length; 14Mm , 19Mm , 24Mm , 29Mm 33Mm, 36Mm , 42Mm , 48Mmdiameter - 2.5Mm , 2.75Mm , 3Mm , 3.5Mm , 4Mm 35 Des , Biolimus , Fda / Ce Approved Stainless Steel Platform Non Polymerlength; 14Mm , 18Mm , 24Mm , 28Mm , 33Mm, 36Mm , 42Mm , 48Mm Diameter - 2.5Mm , 2.75Mm , 3Mm , 3.5Mm , 4Mm 36 Des, Zotarolimus, Fda Approved Cobalt Chromium Platform , Polymer Type -Biolinx 37 Des, Zotarolimus, Ce Approved Cobalt Chromium Platform Polymer Type -Phosphorylcholine 38 Des, Zotarolimus, Only Dcgi Cobalt Chromium Platform Hydrophilic Polymer 39 Des, Zotarolimus Eluting Coronary Stent System With Core Wire And Continuous Sinusoid Technology, Cobalt Alloy, Platinum Iridium Core, 40 Des, Dual Drug Elutingpolymer Free Stent 41 Bms, Fda Approved Cobalt Chromium Platform 42 Bms, Ce Approved Cobalt Chromium Platform 43 Bms, Only Dcgi Approved Cobalt Chromium Platform 44 Bifurcation Stent Self Expanding, Nitinol 45 Bifurcation Stent Balloon Expandable, Platinum Chromium 46 Bifurcation Stent Sirolimus Eluting, Cobalt Chromium 47 Bifurcation Stent Paclitaxel Eluting, Cobalt Chromium 48 Tapered Des, Sirolimuscoronary Stent With Biodegradable Polymer 49 Des, Sirolimus, Ce And Fda Approved, Cobalt Chromium Platform, Biodegradableplla Eluting, 60 Mcg Strut Thickness, Cumulative Drug Release Technology With High Trackability 50 Des, Sirolimus, Only Dcgi Approved Cobalt Chromium Platform 45 Micron 51 Des, Sirolimus, Fda Approved Stainless Steel Platform 52 Des, Sirolimus, Ce Approved Stainless Steel Platform 53 Des, Sirolimus, Only Dcgi Approvedstainless Steel Platform 50 Micron Strut Thicknes 54 Des, Sirolimus , 65 Micron Strut , Hybrid Design With Proximal Main Branch Segment And Distal Tapered Side Branch Segment 55 Des, Sirolimus, Cobalt Chromium ( Any Diameter / Any Length ) 56 Sirolimus Eluting Coronary Stent System With An65 Μm Strut Thickness , Delivery System With Monolithic Distalshaft Design. , Elongated Distal Tip Of 7.5Mm To Ensure Lower Entry Profile. Size: 2-4.5, Length:8-48 57 Des Sirolimus, Cobalt Chromium L 605 Alloy, Biodergradable Polymer, Ce Approved, Varying Strut Width 85, 70 &50 Microns, Size 2.25-4.5Mm Length 8-47Mm 58 Des , Sirolimus, Ce Approved, Cobalt Chromium Platform, Abluminal Biodegradable Polymer Eluted In The Grooves. 59 Coronary Self Apposing Stent 60 Multilink Cobaltchromium Stent 61 Meshed Stent 62 Ptfe Covered Stent Stainless Steel, Rapid Exchange Type, Sizes 2.8, 3.5, 4, 4.5, 4.8Mm, Usable Length 143Cm, Crimped Stent Profile 0.068Inch 63 Biodegradable Vascular Scaffold ( Bvs ) Everolimus Eluting 64 Biodegradable Vascular Scaffold ( Bvs ) Sirolimus Eluting 65 Stainless Steel Abluminally Coated Sirolimus Eluting Coronary Stent With Microporous Surface &Low Biodegradable Polymer With Temperature Controlled Packing And Temperature Monitoring Device--Ce Approved 66 Polymer Free Dual Drug Sirolimus And Probucol Eluting Stent Technology With Microporous Surface Abluminal Coating And Shellac Resin With Diameters 2Mm-4Mm And Length 8Mm-48Mm- Dcgi Approve 67 Cobalt Chromium Abluminally Coated Sirolimus Eluting Coronary Stent With Microporous Surface & Low Biodegradable Polymer –Ce Approved 68 Stainless Steel Abluminally Coated Sirolimus Eluting Coronary Stent With Microporous Surface & Low Biodegradable Polymer --Ce Approved 69 Des, Sirolimus, Ce Approved Stainless Steel Platform, Pbma / Peva Double Layer Polymer Coating For Optimal Drug Release Control, 90 Days Drug Releasing. Flexible Stent Design , .Large Opencells For Side Branch Access 70 Des, Sirolimus Ce / Fda / Dcgi Approved Cobalt Chromiumplatform, Biodegradable Polymer, Strut 56-60Microns, :Length:8-48, Size: 2-4, 4.5 , With Laser Cut Technology Seamless Tubing In A Serpentine Patern 71 Des, Sirolimus With Cumulative Drug Realese Technology, Ce / Fda / Dcgiapproved Cobalt Chromiumplatform, Biodegradable Polymer Strut Thickness 60Microns, Length:8-48, Sizes : 2-4.5 , With Laser Cut Technology Seamless Tubing In A Serpentine Patern, Ldz Stent Link Design 72 Des, Sirolimus With Cumulative Drug Realese Technology, Ce / Fda / Dcgiapproved Cobalt Chromiumplatform, Biodegradable Polymer Strut Thickness 56-60Microns Length:8-48, Sizes : 2-4.5 , With Laser Cut Technology Seamless Tubing In A Serpentine Patern 73 Des, Sirolimus Ce / Fda / Dcgi Approved Cobalt Chromiumplatform, Biodegradable Polymer, S-Link Strut 56-60Microns, Size:8-48, Size: 2-4.5 , , With Laser Cut Technology Seamless Tubing In A Serpentine Patern 74 Dual Drugsirolimus Coated Stentfusion Coating Both Stent & Balloon With Drug Coating.Edge Coating : 0.5Mm Of Proximal And Distal Ends Of Balloon Also Should Be Coated Sizes : 2.25-4Mm Length: 8-48Mm 75 Des-Sirolimus Eluting Stentwith Biodegradable And Biocompatible Polymer Stent Diameter 2.25 ( Mm ) Stent Length 8 To 48 ( Mm ) 76 Des Serolimus Eluting Cobalt Chromium Stent System Strut Thickness Of 0.07Mm With A Hybrid Design Of Closed And Open Cells With Hypotube For Pushability .Size:2.5-4.5, Length:8-38 77 Drug Eluted Cobalt Chromium Stent With Biodegradable Ploymer On Microporus Surface Temparature Contol With Tag Alert 78 Drug Eluted Cobalt Chromium Stent With Biodegradable Ploymer On Microporus Surface. 79 Des, Sirolimus, / Probucol Eluting Stent Polymer Free Coronary Stent System. 80 Des, Sirolimus, Cobalt Chromium Long Stent With Length More Than 48 Mm 81 Des Sirolimus Cobalt Chromium, Biodegradable , Biocompatible Polymer; Sizes Ranging From 2 To 4.5 Mm Length And Diameter 8Mm To 48 Mm 82 Des, Sirolimus 3.9Nano Gram / Stent Length, Cobalt Chromiuml605 Stent With 80 Micron Strent Thickness With Open Cell Structur For Side Branch Re Crossing 83 Des, Sirolimus 3.9Nano Gram / Stent Length, Cobalt Chromiuml605 Stent With 80 Micron Strent Thickness With Open Cell Structur For Side Branch Re Crossing , Coating Albuminal And Gradient , Hydro Philic Distal Shaft Coating 84 Des, Sirolimus L 605 Cobalt Chromium, Biodegradabe Polymer Dcgi Approved, 65 Micron Struts With Open & Closed Designsize 2.25 -4 Mm, Length -10 , 13, 15, 18, 20, 24, 28, 32, 36, 40Mm 85 Des-Sirolimus Eluting Stentwith Biodegradable And Biocompatible Polymer Stent Diameter 2Mm Stent Length 8 To 48 Mm 86 Coronary Stent Des, Sirolimus Drug Abluminal Coated Stent And Balloon 87 Des, Sirolimus Fda / Dcgi / Ce Approved Cobalt Chromium Platform 88 Des Sirolimus, Ce Apporoved, 59 Micron Strut Thickness With High Trackability 89 Des, Sirolimus Cobalt Chromium , Ce / Dcgi, 70Micron Strut, Size 2.5-, 4 Length:8-38, With Plla-Pgla Based Polymer 90 Des, Everolimus , Cobalt Chromium Platform With 55 Micron Strut C And S Link Design With Schifsorb Polymer Coating Technology Size 2.25-4.5 Mm Length 7 To 48Mm 91 Des, Everolimus , Only Dcgi Cobalt Chromium Platform With 60 Micron Strut C And S Link Design With Schifsorb Polymer Coating Technology Size 2.25-4.5 Mm Length 7 To 48Mm 92 Sirolimus Eluting Coronary Stent System, 65 Micrometer Strut Thickness-Diameter 2.25, 2.5, 2.75, 3, 3.5, 4, 4.5 X 8, 12, 16, 20, 24, 28, 32, 36, 40Mm Dcgi Approved , Cobalt Chromium Platform 65Mm Strut Thickness, Biodegradable Polymer , Biodegradable And Biocompatible Polymer Strut Diameter 2.25Mm And Stent Length 8 To 48Mm. Des Sirolimus L605 Cobalt Chromium Dcgi Approved With Open And Closed Cell Design Specialty Of Abluminal Drug Coating , Hybrid Design, Swiss Technology. Np:7-10Atm, Tip Entry-0.016. 93 Des, Rapamycin Drug Eluting Stent With Abluminal In Groove Design. Fda / Ce Approved, Cobalt Chromium Platform. 94 Cobalt Chromium L605 Alloysirolimus Eluting Coronary Stent Biodegradable Polymer –Ce Approved, Width Proximal / Distal Cell:85Micron To Connector 50 Micron , Delivery System Length 140Cm , Size: 2.25-4.5 Length: 8 To 48 Mm 95 Renal Stent Diameters-5-7Mm, Lengths-12-18Mm 96 Covered Peripheral Stent- Self Expanding Self Expanding 97 Covered Peripheral Stent- Balloon Expandable Balloon Expandable 98 Coveredstent Diameter:6Mm-14Mm / Length:30Mm-70Mm 99 Carotid Self-Expandable Stent 100 Fda Approved Carotid Stent ( Open Cell ) Nitinol Mesh Straight & Tapered 101 Fda Approved Carotid Stent ( Closed Cell ) Nitinol Mesh Straight & Tapered 102 Ce Approved Carotid Stent With Micro Mesh To Minimise Risk Of Distal Embolisation 103 Intracranial Stent -Open Cell Design 104 Intracranial Stent - Closed Cell Design 105 Illiac & Femoral Stents ( Above The Knee ) 106 Coarctation Stent ( Covered ) Platinum / Iridium, 0.035 Compatible, Diameter - 12–24Mm, Lengths - 16, 22, 28, 34, 39, 45, 50, 55, 60Mm, Delivery System Length – 110Cm 107 Coarctation Stent ( Uncovered ) Platinum / Iridium, 0.035 Compatible, Diameter - 12–24Mm, Lengths -, 16, 22, 28, 34, 39, 45, 50, 55, 60 Mm, Delivery System Length – 110Cm 108 Abdominal Aortic Stent 109 Abdominal Aortic Stent Graft 110 Thoracic Aortic Stent Graft 111 Carotid Balloon Expandable Stent 112 Peripheral Self-Expanding Stents Nitinol / Eptfe, Guidewire - 0.035, Diameters-6, 7, 8, 9, 10, 12, 13.5Mm, Lengths - 40, 60, 80, 100, 120Mm, Delivery System Lengths -80, 117Cm 113 Balloon Expandableperipheral Stents ( Bms ) 114 Fda Approved Balloon Expandable Iliac Stents ( Co Cr ) Cobalt Chromium, Compatible Guidewire - 0.014, Diameters- 6–10Mm, Lengths - 12, 16, 19, 29, 39, 59Cms, Delivery System Lengths- 80, 135Cm 115 Balloon Expandable Biliary / Iliac Stents ( Stainless Steel ) , 0.035 Compatible Stainless Steel, Compatible Guidewire - 0.035, Diameters- 6-10Mm, Lengths - 17, 25, 27, 37, 57Mm, Delivery System Lengths - 75, 135 116 Balloon Expandable Iliac Stents ( Stainless Steel ) Stainless Steel, Compatible Guidewire - 0.035, Diameters- 11, 12Mm, Length - 30Mm 117 Semi-Complaint Balloons, Tip Entry Profile: 0.016, Crossing Profile: 0.018, Hypo-Tube Design, Nominal Pressure: 6Atm, Rbp: 14Atm, Average Burst Pressure: 20Atm, Slider Hydrophilic Coating, Diameter: 0.075 - 4Mm, Balloon Lenght: 5 - 30Mm Us Fda / Ce Approved 118 Nc High Pressure Balloons, Tip Entry Profile: 0.016, Crossing Profile: 0.029, 5F & 6F Guiding Catheter Compatibility For Kissing Balloon Technique, Nominal Pressure: 12Atm, Rbp: 22Atm, Average Burst Pressure: 30Atm, Working Length: 140, Slider Hydrophilic Coating, Proximal Shaft Od: 2F, Distal Shaft Od: 2.55 / 2.6F, Balloon Pleats: 3, Compliance: 0.55%Balloon Diameter: 2 - 5Mm, Balloon Lenght: 8 - 18Mm Us Fda / Ce 119 Pta Balloon Catheter, Non-Compliant 0.014 Otw, Nominal Pressure: 12Atm, Low Entry Profile: 0.017, Rbp: 22 Atm, Sheath Compatibility: 4, 5 & 6F Balloon Diameter: 2- 7Mm, Balloon Length: 10 - 150Mm, Catheter Length: 70 - 150Cm Us Fda / Ce Approved 120 Pta Balloon Catheter, Non-Compliant 0.035 Otw, Nominal Pressure: 12Atm, Low Entry Profile: 0.038, Rbp: 22 Atm, Sheath Compatibility: 5, 6 & 7F Balloon Diameter: 3- 10Mm, Balloon Length: 20 - 150Mm, Catheter Length: 70 - 150Cm Us Fda / Ce Approved 121 Pta Balloon Catheter, Semi-Compliant 0.014 Otw, Nominal Pressure: 6Atm, Rbp: 14 Atm, Average Burst Pressure: 20Atm, Sheath Compatibility: 4 & 5F Balloon Lenght: 5 - 200Mm, Balloon Od: 1.5 - 6Mm, Catheter Lenght: 70 - 150Cm Us Fda / Ce Approved 122 Pta Balloon Catheter, Semi-Compliant 0.035 Otw, Nominal Pressure: 6Atm, Rbp: 14 Atm, Average Burst Pressure: 20Atm, Sheath Compatibility: 5, 6 & 7F Balloon Lenght: 20 - 200Mm, Balloon Od: 3 - 10Mm, Catheter Lenght: 70 - 150Cm Us Fda / Ce 123 Balloon Expandable Renal Stent ( Co Cr ) Cobalt Chromium, Compatible Guidewire - 0.035, Diameters- 4, 4.5, 5, 5.5, 6, 6.5, 7Mm, Lengths - 12, 15, 18Cms, Delivery System Lengths- 80, 135Cm 124 Balloon Expandable Biliary / Renal Stent ( Stainless Steel ) Stainless Steel, Compatible Guidewire - 0.014& 0.018, Diameters- 3-8Mm, Lengths - 12, 16, 20, 24, 30Cms, Delivery System Lengths- 80, 135Cm 125 Fda Approved Interwovennitinol Stent For Sfa / Popliteal .Lowest Kink Resistant , Diameters-4.5-6.5Mm, Lengths – 20, 30, 40, 60, 80, 100, 120, 150Cm, Delivery System Length – 120Cm 126 Stent Across Hip / Knee Joint, Diameters- 6, 7, 8Mm, Length - >120Cm 127 Fda Approved Self Expanding Nitinol Stent System For Iliac Arteries0.035 Compatible , Diameters-6, 7, 8, 9, 10Mm, Guidewire - 0.035, Length 20, 30, 40, 60, 80, 100, Delivery System Length - 80, 135Cm 128 Nitinol Stent System For Iliac Arteries 0.035 Compatible Diameters- 12Mm, Guidewire - 0.035, Lengths - 20, 30, 40, 50, 60, 70, 80, 100, 120Cm, Delivery System Length - 75, 120Cm 129 Nitinol Stent System For Iliac Arteries 0.018 Compatible, Diameters- 6, 7, 8, 9, 10Mm, Guidewire - 0.018, Lengths - 20, 30, 40, 60, 80Cm, Delivery System Length - 125Cm 130 Nitinol Stent System For Sfa Diameters- 5, 6, 7, 8, Lengths - 20, 40, 60, 80, 100, 120, 150, 200Mm, Delivery System Length - 75, 130 131 Elgiloy Endoprosthesis System For Iliac A, Diameters- 6, 7, 8, 9, 10Mm Lengths - 18, 20, 23, 24, 34, 35, 36, 38, 39, 46, 47, 49, 52, 55, 59, 61, 66, 67, 69Mm, Delivery System Length - 75, 135 132 Self Expandable Peripheral Stent System, Diameter :3.8Mm-4.5Mm / Length:16Mm-76Mm 133 Self Expandable Peripheral Stent System, Diameter :9Mm-14Mm / Length:8Cm-120Cm 134 Fda Approved Sfa Self Expanding Peripheral Stent , Length From 120- 150Mm On 135 Cm Catheter 135 Self Expandable Peripheral Stent System, Straight Type-Diameter:6Mm-10Mm / Length:135Cmtapered Type-Diameter: ( 8 / 6 ) Mm- ( 10 / 7 ) Mm / Length:135Cm 136 Balloon Expandable Peripheral Stentdiameter:5Mm-10Mm / Length:12Mm-57Mm 137 Balloon Expandable Peripheral Stent, Diameter:5Mm-7Mm / Length:14Mm-21Mm 138 Semicompliant Balloon Balloon Size: 1.2Mm– 5 Mm / Length: 6 Mm -42 Mm, ( Fda / Ce Approved ) 139 Otwcompliant Balloon Balloon Size: 1.2Mm – 5 Mm / Length: 6 Mm -30Mm, ( Fda / Ce Approved ) 140 1.25-2.5Mm Semicompliant Otw Balloon For Cart Techniqueballoon Length: 10-20 Mm / Shaft Length: 135, 148Cm, Entry Profile - 0.43 Mm ( Fda / Ce Approved ) 141 Core-Wire Structure With Superiorradio Opacity Atraumatic Navigation Baloon With 3 Pleats Construction And Platinum Iridium Markers Ce & Dgci Approved Hydrophilic Coated Shaft Tip With Fasttrack Tip Technology 142 Baloon With 3 Pleats Construction And Platinum Iridium Markers Ce & Dgci Approved Shaft With Tapered Wire Constructionfor Better Trackability Tip With Flexible Material And Entry Profile Of 0.017 143 Rapid Exchange Noncompliant Balloon Balloon Size: 1.2Mm– 5 Mm / Length: 6 Mm -42 Mm ( Fda / Ce Approved ) 144 Rapid Exchange Semicompliant Balloon Balloon Size: 1.2Mm – 5 Mm / Length: 6 Mm -42 Mm ( Fda / Ce Approved ) 145 Otw Noncompliant Balloon Balloon Size: 1.2Mm – 5 Mm / Length: 6 Mm -30 Mm ( Fda / Ce Approved ) 146 Otw Semicompliant Balloon Balloon Size: 1.2Mm – 5 Mm / Length: 6 Mm -30 Mm ( Fda / Ce Approved ) 147 1.25-2.5Mm Semicompliant Cto Balloon Balloon Length: 10-20 Mm / Shaft Length: 148Cm, ( Fda / Ce Approved ) 148 1.25-2.5Mm Non-Compliant Cto Balloon Balloon Length: 10-20 Mm / Shaft Length: 148Cm, ( Fda / Ce Approved ) 149 Ce / Dcgi Approvedrapid Exchange Balloon Forchronic Total Occlusion.0.016Mm Lesion Entry Profile &Tapered Balloon Shape For Preventing Buckling , Crossing Profile Of 0.019, With Hydrophilic Coating With Proximal Single Marker, Shaft Length 140Cm, 150 Us Fda Approved Rapid Exchange 1.2-2 Mm Semicompliant Cto Balloon , Balloon Length:6-30Mm / Shaft Length: 145Cm, ( Fda / Ce Approved ) 151 Rapid Exchange Semicomplaint Balloon Balloon Size: 1.2 Mm - 5 Mmlength 6Mm - 42Mm ( Dcgi / Ce Approved ) 152 Rapid Exchange Non Complaint Balloon Balloon Size: 1.2 Mm - 5 Mm Length 6Mm - 42Mm ( Dcgi / Ce Approved ) 153 Semicomplaint Balloon.Balloon Size : 1.5Mm - 2.5Mm / Length : 8Mm-20Mm Rapid Exchange Proximal Shaft 0.72Mm And Distal Shaft -0.90Mm, Tip Profile 0.018 With Nominal Inflation Pressure 8 Atm& Rbp-16 Atm, And Having Two Plantium Iri Dum Makers ( Dcgi / Ce Approved ) 154 Rapid Exchange Semi-Complaint / Cto Balloon, Dcgi / Ce Approved, Balloon Size 1.00, 1.20, 1.50, 2.00, 2.50, 2.75, 3.00, 3.25, 3.50, 3.75, 4.00Mm / Lemgth 6, 8, 10, 12, 15, 20, 30Mm 155 Rapid Exchange Non-Complaint Balloon, Dcgi / Ce Approved , Balloon Size 1.50, 1.75, 2.00, 2.25, 2.50, 2.75, 3.0, 3.25, 3.50, 3.75, 4.0, 4.25, 4.5Mm / Length 8, 10, 13, 15, 20, 30 156 Rapid Exchange Compliant / Noncompliant Balloon, Balloon Diameters-4-6Mm, Lengths-15, 20Mm, Catheter Length-150Cm, Nominal Pressure-6Atm ( Fda / Ce Approved ) 157 Rapid Exchange Compliant / Noncompliant Balloon, Balloon Diameters-1.5- 4Mm, Lengths- 9- 30Mm, Catheter Length-142Cm, Nominal Pressure-6-14Atm ( Fda / Ce Approved ) 158 Monorail Compliant / Noncompliant Balloon, Balloon Diameters-1.5- 4Mm, Lengths- 9- 30Mm, Catheter Length-140 / 135Cm, Nominal Pressure-6Atm ( Fda / Ce Approved ) 159 Otw Compliant / Noncompliant Balloon , Balloon Diameters-1.5- 4Mm, Lengths- 9- 30Mm, Catheter Length-140 / 135Cm, Nominal Pressure-6Atm ( Fda / Ce Approved ) 160 Monorail Compliant / Noncompliant Balloon, Balloon Diameters-2- 6Mm, Lengths- 6- 30Mm, Catheter Length- 143Cm, Nominal Pressure-12Atm ( Fda / Ce Approved ) 161 Otw Compliant / Noncompliant Balloon, Balloon Diameters-2- 6Mm, Lengths- 6- 30Mm, Catheter Length- 142Cm, Nominal Pressure-12Atm ( Fda / Ce Approved ) 162 Nc Balloon Twin Layered For Very High Pressure Dilatation, Balloon Diameters-2- 6Mm, Lengths- 6- 30Mm, Catheter Length- 142Cm ( Fda / Ce Approved ) 163 Semicompliant / Noncompliant Balloon With Tip Entry Profile 0.019”, Balloon Lengths-8-38Mm, Balloon Diameters-2-4.5Mm, 0.014” Compatible ( Fda / Ce Approved ) 164 Us-Fda Approved For Cto Indication, Semi & Non Compliant Balloon Dilatation Catheter , Balloon Lengths-8-38Mm, Balloon Diameters-2-4.5Mm, 0.014” Compatible ( Fda / Ce Approved ) 165 Us-Fda Approved For Cto Indication, Semi & Non Compliant Balloon Dilatation Catheter , Avrage Burst Pressur Of 18 Atmosphere And 143Cm Length ( Fda / Ce Approved ) 166 Us-Fda Approved For Cto Indication, Semi & Non Compliant Balloon Dilatation Catheter , Size:1.5, 2, 2.5Mm, Length:6, 8, 12, 15 ( Fda / Ce Approved ) 167 Fda Approved Semicompliant Balloon Dilatation Catheter With Crossflex Technology, Laser Bond Technology, Size: 1.2, 1.5, 2, 2.5Mm, Length :6, 8, 12, 15 ( Fda / Ce Approved ) 168 Non Compliant Coronary Balloon; Shaft Size Tapeing From 2.7F-2.3F Diameter 1.5 To 5.0 Length 6 To 30 Mm 169 Fda Approvednon Compliant Balloon Dilatation Catheter With Crossflex Technology, Laser Bond Technology, Size;2, 2.5, 2.75, 3, 3.5, 4, 4.5Mm, Length;6, 8, 12, 15Mm ( Fda / Ce Approved ) 170 Rapid Exchange Semicompliant Nylon Semi-Compliant Balloon With 0.017 Tip Entry Profile, 135 Mm Effective Length | Balloon Size: 1.5Mm – 4 Mm / Length: 9 Mm -30 Mm ( Fda / Ce Approved ) 171 Rapid Exchange Pebax Noncompliant Balloon Balloon With Patented Hydrophilic Coating On Distal Shaft With 0.017 Tip Entry Profile, Balloon Diameters 2.25 - 4.0 Mm , Lengths 6.0 - 30 Mm, Effective Catheter Length-142Cm, Nominal Pressure-6Atm ( Fda / Ce Approved ) 172 Rapid Exchange Semicompliant Cto Balloon With 0.016 Tip Entry Profile, Average Burst Pressure Of 24 Atmospheresand 140 Mm Length With Slider Hydro Coating| Balloon Size: 1.0Mm – 4 Mm / Length: 5 Mm -30 Mm ( Fda / Ce Approved ) 173 Rapid Exchange Pebax Noncompliant Balloon Balloon With Patented Slider Hydroo Coating With 0.017 Tip Entry Profile And Rated Burst Pressure Of 22 Atm. And Mean Burst Pressure Of 30 Atm.| Balloon Diameters 2.0 - 5.0 Mm , Lengths 8.0 - 18Mm, Effective Working Length Length-140Cm. ( Fda / Ce Approved ) 174 Sirolimus Eluting Balloon Nanolute Propritory Nano Carrier Drug Eluting Tecnology Drug:1.27Μ / Mm2of Sirolimus Drun Release Within 60 Secs.14 To 28 Days Drug Bio Availability In Target Tissue , Size: 2Mm -4Mm Length:40Mm To 100Mm ( Fda / Ce Approved ) 175 Post Dialatationcatheter, Proximal Shaft -1.95F, Distal Shaft -2.7F, Usable Length -140 Cm ( Fda / Ce Approved ) 176 Ptca Pre-Dilatationcatheter, Proximal Shaft -1.8F, Distalshaft -2.7F , Usable Length -140 Cm ( Fda / Ce Approved ) 177 Semi Compliant Xd Shaft , Hydro X Coating Z Tip From 1Mm To 4Mm Size :1, 1.25, 1.5, 2, 2.25, 2.5, 2.75, 3, 3.25, 3.5, 4, Length:8, 10, 12, 15, 20 ( Fda / Ce Approved ) 178 Non Compliant Ptca Balloon Catheter With Crossing Profile Of 0.0360.Np Is 12, Rbp 20 Atm Hydro X ( Distal Tip To Guide Wire Exit Port ) Invio Coating ( Guide Wire Lumen ) Size:1.75, 2, 2.25, 2.5, 2.75, 3, 3.25, 3.5, 3.75, 4, 4.5, 5 , Length: 8, 10, 12, 15, 18 ( Fda / Ce Approved ) 179 Ultra Low Profile Cto Balloon With 0.016 Tip Entry Profile, Flexible Tip. Tri Wrapped Balloon Provides Enhancing Crossability.Thin Proximal Shaft Of 1.9 F Nominal Of 6 Atm And Rbp Of 14 Atm. 1.25 To 3Mm Diameter Ballon ( Fda / Ce Approved ) 180 Fda / Ce Approved , Non Compiant Ptca Balloon Catheter With Hydrophilic Coating Shaft Length Is 145Cm, Shaft Diameter :2F ( 0.67 ) Proximal , Distal:2.5F ( 0.83 ) , Distal For 2.25Mm To 3Mm2.6 Fr ( 0.87Mm ) Distal For 3.25Mm To 5 Mm With Double Ballon Marker , Rbp;20 Atm For 2.25Mm To 4Mm, 18Atm For 4.5 To 5Mm With Entry Profile 0.43Mm 181 ( Fda / Ce Approved ) Non Compliant Hydrophilic Coated Balloon With Flexible Thin Markers, Tri Layer Balloons With Soft Inner And Outer Elastomer Layers That For Resistance From High Pressures And Stronger Polymide Layer In The Middle For Aditional And Safer High Pressur Ressistance., Shaft Diameter Of 1.9F Proximal And 2.5F In The Mid Segment 145 Cm Length With Nominal Pressure Of 12 Atm And Rbp 22 Atm , Lesion Entry Profile 0.017 182 Semicompliant Balloon, Balloon Size: 1.5Mm– 2.5Mm / Length: 8 Mm -20 Mm Rapid Exchange Proimal Shaft 0.72Mmand Distal Shaft -0.90Mm, Tip Profile -0.018 With Nomial Inflation Pressure 8 Atm &Rbp -16 Atm , And Having Two Plantinum Iridum Markers ( Dcgi Approved ) 183 Semi Complaint Balloon Balloon Size : 1.0Mm - 4 Mm / Length : Balanced Ultra-Low 0.16 Profile Tip, Hydrophilic Coating From Tip To Adjacent Guide Wire Port And External Surface With Silicon Coating Inside Guidewire Lumen 184 Semicompliant Balloon, Balloon Size: 1.2Mm– 5 Mm / Length: 6 Mm -42 Mm ( Dcgi Approved ) 185 Otwcompliant Balloon, Balloon Size: 1.2Mm – 5 Mm / Length: 6 Mm -30Mm ( Dcgi Approved ) 186 1.25-2.5Mm Semicompliant Otw Balloon For Cart Technique, Balloon Length: 10-20 Mm / Shaft Length: 135, 148Cm, Entry Profile - 0.43 Mm ( Dcgi Approved ) 187 Rapid Exchange Noncompliant Balloon, Balloon Size: 1.2Mm– 5 Mm / Length: 6 Mm -42 Mm ( Dcgi Approved ) 188 Rapid Exchange Semicompliant Balloon, Balloon Size: 1.2Mm – 5 Mm / Length: 6 Mm -42 Mm ( Dcgi Approved ) 189 Otw Noncompliant Balloon, Balloon Size: 1.2Mm – 5 Mm / Length: 6 Mm -30 Mm ( Dcgi Approved ) 190 Otw Semicompliant Balloon, Balloon Size: 1.2Mm – 5 Mm / Length: 6 Mm -30 Mm ( Dcgi Approved ) 191 1.25-2.5Mm Semicompliant Cto Balloon, Balloon Length: 10-20 Mm / Shaft Length: 148Cm ( Dcgi Approved ) 192 1.25-2.5Mm Non-Compliant Cto Balloon, Balloon Length: 10-20 Mm / Shaft Length: 148Cm ( Dcgi Approved ) 193 Us Fda Approved Rapid Exchange1.2-2 Mm Semicompliant Cto Balloon, Balloon Length:6-30Mm / Shaft Length: 145Cm ( Dcgi Approved ) 194 1.25Mm-4.5Mm And Length 10Mm To 40Mm. Rapid Exchange Proximal Shaft 0.72Mm And Distal Shaft 0.90Mm.Tip Profile 0.018 With Normal Inflation Pressure 8Atm And Rbp 16Atm And Having Two Platinum Iridium Markers ( Dcgiand Ce Approved ) Advaglide Ptca Balloon Catheter Semicomplaint 1.25, 1.5, 2, 2.25, 2.5, 2.75, 3, 3.25, 3.5, 4, 4.5 X 10, 12, 15, 20, 25, 30, 35, 40 Mm Respectively 195 Non Complaint Cto Balloon 0.85Mm Diameter Crossing Profile Of 0.019 Length-6, 10 And 15 196 Non Complaint Balloon Size 2.00Mm - 5.00Mm Hydrophilic Coating From Tip To Adjacent Guide Wire Port And External Surface With Silicon Coating Inside Guidewire Lumen 197 Tip Profile Is 0.014 Rapid Exchange Nc Balloon, Size From 1.25Mm-5Mm Length:6Mm-42Mm With Dcgi And Ce Approved Nc Advaglide Ptca Balloon Catheter Non-Complaint 1.5, 2, 2.25, 2.5, 2.75, 3, 3.25, 3.5, , 3.75, 4, 4.5, 5Mm X 8, 10, 12, 15, 20, 25, 30 Mm Rapid Exchange Complaint / Non Complaint Balloon Diameters From 1.5Mm To 4Mm And Length 9-30Mm, Catheter Length 142Cm, Np 6-14Atm 198 Hydrophilic Coated Thrombus Aspiration Catheter, Ce / Dcgi / Fda, 6Fr 7Fr, Effective Length 1400Mm 199 Ce Approved Thrombus Aspiration Catheter With Removable Core Wire And 30Cm Hydrophilic Coating From The Tip; Available In 6F And & 7F. Length 140 Cmdcgi Approved Thrombus Aspiration Catheter 200 Thrombus Aspiration Extraction Catheter With Hydrophilic Coating, Working Length: 145Cm, Guidewire Compatibility: 0.014, Rapid Exchange Segment Length: 10Cm, Extraction Lumen Area: 0.858Mm^2, Radiopaque Marker: Located 1Mm From The Tip, Guide Catheter Compatibility: 6F / 0.068, Crossig Profile: 4.5F / 0.059, Extraction Rate: 1.16Ml / Sec Size: 6F Us Fda / Ce Approved 201 Thrombus Aspiration Catheter With Stylet And Hydrophilic Coating Of 240Mm Outer Diameter Distal:5.3F And Proximal: 4.2F Sizes – 6F, Length-140Cm Us Fda / Ce Approved 202 Thrombus Aspiration Catheter With Stylet And Hydrophilic Coating Of 240Mm Outer Diameter Distal:5.3F And Proximal: 4.2F Sizes – 6F, Length-140Cm Us Fda / Ce Approved 203 Thrombus Aspiration Catheter With Stylet And Hydrophilic Coating Of 240Mm Outer Diameter Distal:5.6F And Proximal: 4.8F Sizes – 7F, Length-140Cm Us Fda / Ce Approved 204 Thrombus Aspiration Catheter Without Stylet And Hydrophilic Coating Of 240Mm Outer Diameter Distal:5.6F And Proximal: 4.8F Sizes – 7F, Length-140Cmus Fda / Ce Approved 205 Peripheral And Coronary Micro Catheter With Braided Tip Size: 0.035 & 0.014 / Length: 135 - 150Cmus Fda / Ce Approved 206 Ptca Scoring Balloon Catheter, Working Range: 2 - 20 Atm, Catheter Compatibility: 6F, Guidewire Compatibility: 0.014 Balloon Diameter: 2- 3.5Mm, Balloon Length: 6 - 15Mm, Catheter Length: 137Cmus Fda / Ce Approved 207 Rapid Exchange Compliant / Noncompliant Balloon, Balloon Diameters-4-6Mm, Lengths-15, 20Mm, Catheter Length-150Cm, Nominal Pressure-6Atm ( Dcgi Approved ) 208 Dcgi Approved Ptca Balloon Catheternoncompliant ( Nc ) Having Soft Tapered Tip, Short & Round Shoulder Design, 2 Platinum Markers At Proximal And Distal End, 22 Atm Rbp Balloon Good Refolding Ability, Great Withdrawal Ability. 209 Dcgi Approved Ptca Balloon Catheter Semi Complaint ( Sc ) Having Outstanding Tip And Balloon Design, Enhanced Push Ability, 2 Swagedplatinum Markers 3-Directional Memory-Folds Balloon, 0.017” Soft Tapered Tip, Good Re-Folding. 210 Dcgi Approvedptca Guidewire Having Balance Between Tip Flexibility And Body Stiffness, 2 Cm Radiopaque Distal Tip, 1: 1 Torque Response, Shapable Distal Tip. 211 Dcgi Approved Ptfe Coated Guidewire Having Stiff Proximal Shaft, Floppy Distal Tip, Smooth, Rounded Ends & Ptfe Coating. 212 Dcgi Approved Ptca Guidewire Having Balance Between Tip Flexibility And Body Stiffness, 2 Cm Radiopaque Distal Tip, 1: 1 Torque Response, Shapable Distal Tip. 213 Dcgi Approved Ptfe Coated Guidewire Having Stiff Proximal Shaft, Floppy Distal Tip, Smooth, Rounded Ends & Ptfe Coating. 214 Dcgi Approvedangiography Guidewire Havinghydrophilic Coating Radiopaque, Polyurethane Jacket, Tungsten Blended Polymer, 1:1 Torque Responseshapable Distal Tip. 215 Rapid Exchange Compliant / Noncompliant Balloon, Balloon Diameters-1.5- 4Mm, Lengths- 9- 30Mm, Catheter Length-142Cm, Nominal Pressure-6-14Atm ( Dcgi Approved ) 216 Monorail Compliant / Noncompliant Balloon, Balloon Diameters-1.5- 4Mm, Lengths- 9- 30Mm, Catheter Length-140 / 135Cm, Nominal Pressure-6Atm ( Dcgi Approved ) 217 Otw Compliant / Noncompliant Balloon, Balloon Diameters-1.5- 4Mm, Lengths- 9- 30Mm, Catheter Length-140 / 135Cm, Nominal Pressure-6Atm ( Dcgi Approved ) 218 Monorail Compliant / Noncompliant Balloon, Balloon Diameters-2- 6Mm, Lengths- 6- 30Mm, Catheter Length- 143Cm, Nominal Pressure-12Atm ( Dcgi Approved ) 219 Otw Compliant / Noncompliant Balloon, Balloon Diameters-2- 6Mm, Lengths- 6- 30Mm, Catheter Length- 142Cm, Nominal Pressure-12Atm ( Dcgi Approved ) 220 Semicompliant / Noncompliant Balloon With Tip Entry Profile 0.019”, Balloon Lengths-8-38Mm, Balloon Diameters-2-4.5Mm, 0.014” Compatible ( Dcgi Approved ) 221 Non Compliant Ptca Balloon Catheter With Hydrophilic Coating , 0.16 Lesion Entry Profile And 24 Bar Rbp ( Dcgi Approved ) 222 Semi Complaint Ptca Balloon , Catheter With Hydrophilic Coatingonballoon And Distal Shaft Including Sleeve And Transition Tube With Comparable Lesion Entry Profile ( Dcgi Approved ) 223 Twin Layered Super High Pressure Balloon Dilated Catheter For Highly Calcified Lesion, 35 Bar Rbp, 45 Bar Abp-Ce Marked ( Dcgi Approved ) 224 Semicompliant Balloon, Balloon Size: 1.5Mm– 2.5Mm / Length: 8 Mm -20 Mm Rapid Exchange Proimal Shaft 0.72Mmand Distal Shaft -0.90Mm, Tip Profile -0.018 With Nomial Inflation Pressure 12 Atm &Rbp -22Atm , And Having Two Plantinum Iridum Markers ( Dcgi Approved ) 225 Rapid Exchange Noncompliant Balloon, Size: 1.0Mm– 5 Mm / Length: 6 Mm -42 Mm Catheter Length = 135-140 Cm Nominal Pressure - 12Atm ( Dcgi Approved ) 226 Otw Semicompliant Balloon , Balloon Size: 1.2Mm – 5 Mm / Length: 6 Mm -30 Mm ( Dcgi Approved ) 227 Ptca-Rapid Exchange Semi Compliantpre-Dilation Catherer, Entry Profile0.017, Crossing Profile 0.026, Shaft Length 2.2Fr Skived Over Extruded Hypotube Distal 2.4 Fr, Size:1.5, 2, Lengt: 10, 15, 20, 30 ( Dcgi Approved ) 228 Semi Compliantpre-Dilation Catherer, Balloon Material Nylon 12, Entry Profile0.017, Crossing Profile 0.026, Shaft Length 2.2Fr Skived Over Extruded Hypotube Distal 2.4 Fr, Size:2.52.75, 3, 3.25, 3.5, 3.75, 4Lengt: 10, 15, 20, 3032 ( Dcgi Approved ) 229 Low Profile Otw Peripheral Vascular Dilatation Balloons : Low Profile Over The Wire Peripheral Vascular Dilatation Balloons, End Hole 018”, Shaft Length 40, 80, 90, 135, 150 Cms, Balloon Diameters 2.5 Mm To 10Mm, Balloon Lengths 1Cm To 22 Cm, Upto 8*4- 4 Fr Sheath Capable, Upto 10*4 - 5Fr Sheath Capable, Upto 10*8 - 6Fr Sheath Capable. 230 Ptca-Rapid Exchange Non Compliantpost-Dilation Catherer, Entry Profile0.017, Crossing Profile 0.032, Proximal Shaft2.2Fr, Over Spv Hypotube Distal 2.6 Fr, Size:1.5, 2, 2.5, 2.75, 3, 3.25, 3.5, 3.75, 4Mmlengt: 10, 15, 20, 30Mm ( Dcgi Approved ) 231 Platinum - Iridium Stents For Large Vessels - Covered And Uncovered - For Use In Large Vessels 232 Peripheral Drug Eluting Balloon-0.035Guide Wire Compatible-, Balloon Size:4 Mm --7Mm / Length: 40Mm ---150 Mm 233 Peripheral Drug Eluting Balloon -0.018 Guide Wire Compatible--Balloon Size:4 Mm --7Mm / Length: 40Mm ---120 Mm 234 Sirolimus Eluting Pheripheral Balloon Nanolutenano Carrier Drug Eluting Tecnology.Low Crossing Profile, Size:5Mm-9Mm Length:40Mm-100Mm 235 Peripheral Otw Balloons -0.035 Guide Wire Compatible, Balloon Size: 3Mm– 12 Mm / Length: 20Mm -300 Mm 236 Peri. Otw Balloon--0.035Guide Wire Compatible-, Balloon Size:4 Mm --12Mm / Length:20Mm –20Mm-100Mm 237 Peri. Otw Balloon- 0.018Guide Wire Compatible- , Balloon Size:2 Mm --7Mm / Length: 20Mm ---150 Mm 238 Peri. Otw Balloon-0.018Guide Wire Compatible- , Balloon Size:4Mm --7Mm / Length: 20Mm ---300 Mm 239 Viatrac 14 / 14 Plus All Sizes And Lengths 240 Armada 35 / 35Ll Balloon Dilatation Catheter 3, 4, 5, 6, 7, 8, 9, 10, 12 And 14 Diameter Length- 20, 40, 60, 80, 100, 120, 150, 200, 250, 5-7F Sheath Compatable, Catheter Length 80 And 145 241 Peripheral Otw Balloon 0.014 Guidewire Compatible, Balloon Size:1.5Mm--6Mm / Length: 20Mm ---210 Mm 242 Pta Rapid Exchange Balloon Catheter, Balloon Size:2Mm--4Mm / Length: 20Mm ---210Mm 243 Fda Approved Low Profile High Presseure Balloon - Below The Knee, Diameter :4Mm To14mm Length 20 , 40, 60, 80 Shaft 90 To 150 Mm 244 Fda Approved Low Profilehigh Pressure Balloon - Sfa, 6F Compatible Upto 7Mm Dia 245 Low Profile Balloon Expandable Peripheral Stent System : Balloon Expandable Stentmade Of 316 L Stainless Steel With Slotted Tube Configuration , Pre Mounted On Otw Balloon Catheter , Cannula Design Of The Stent Providing Exceptionally Low Profile, Expandable To Larger Adult Like Sizes . Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety. 246 Fda Approved High Pressure Balloon - Carotid, Renal, With 6F Compatible Upto 7Mm Dia 247 Peripheral Cto Device, Flexible / Standard-0.014”Guidewire Compatibility 248 Peripheral Cto Device, Balloon Size 3.75Mmx1.5Mmx20mm / 2.75Mmx1mmx20mm 249 Cto Guidewire, Flexible / Standard / Stiff-0.014”Diameter, 300Cm Length 250 Peripheral Balloon, Balloon Diameter=1.5Mm-26Mm Length = 20Mm- 300Mm 251 Peripheral Guide Wire System, Floppy Type / Intermediate Type / Standard Type 252 Peripheral Wire Hydrophilic, Lengths- 145, 180, 260Cm, Diameter - 0.035–0.038”, Angled Or Straight 253 Directional Atherectomy System For Peripheral, Tip Length:6.6Cm-9.6Cm 254 Peripheral Plaque Excision System, Crossing Profile:2.2Cm-2.7Cm 255 Peripheral Support Catheter, 256 135 Cm Thrombus Aspiration Catheter, Outer Diameter: 3.9-5.4F 257 140 Cm Thrombus Aspiration Catheter, Outer Diameter: 3.9F 258 145 Cm Thrombus Aspiration Catheter, Outer Diameter: 3.5 F 259 Thrombus Aspiration Catheter With Hydrophilic Coating, Sizes – 6-8F, Length-140Cm, Internal Diameter – 0.070” – 0.86” 260 Thrombus Aspiration Catheter With Braided Technology, Catheter Length 145Cm, Maximum Tip Diameter - 1.73, 1.98, Guide Catheter - 6, 7F 261 Low Profile Thrombus Aspiration Catheter, Maximum Tip Diameter - 1.40, Length 145 Cm 262 Thrombus Aspiration Catheter With Tapered Silva Tip With Sloped Extraction Lumen, 0.014”, Length-140Cm, Rapid Exchange Length-20Cm 263 Thrombin And Collagen Based Flowable Hemostat For Pacemaker Pocket Hemostasis.Thrombin Vial , Collagen Syringe With Attached Mixing Luer, Diluent Vial, Mixing Accessories, Applicator Tips 264 Collagen Based Vascular Closure Device 6F, 8F 265 Suture Based Vascular Closure Device 266 Monofilament Suture Type Vascular Closure Device, Puncture Size – 8F-21F 267 Braided Suture Type Vascular Closure Device, Puncture Size – 5F- 8F 268 Mechanical Seal Type Vascular Closure Device, Puncture Size- 5 / 6, 7 / 8 269 Balloon Type Radial Artery Compression Device, Transparent Dual Compression Balloons, With Velcro Straps, Sizes 24-29Cm 270 Dial Type Radial Artery Compression Device, 271 Brachial / Radial Artery Compression Device With Plastic Strap, Adjustable Plastic Strap, Sizes 21-37Cm 272 Pressure-Assisted Radial Artery Compression Device, Inflatable Bulb Type 273 Pressure-Assisted Femoral Artery Compression Device, Inflatable Bulb Type, Sizes 12, 24Cm 274 Embolization Particles- For Intracranial Embolization, Sizes:300–500, 500–710, , 275 Embolization Particles- For Intracranial Embolization, Sizes: 90–180, 180–300, 300–500, 500–710, 710–1, 000, 1, 000–1, 400, 1, 400–2, 000, 2, 000–2, 800. 276 Y- Connector, 10F Bore With No Blood Lose And No Air Embolism, Has Hemostatic And Fixed Valve Bore Size: 10F Inner Lumen, Rotablator Up To 2.5Mm Burr 277 Pda Device, Duct Occluder Type 1, Compatible With Lower Sheath Retintion Skirt: 10 - 30Mm, Proximal Diameter At Screw: 4 - 22Mm, Distal Diameter At Waist: 6 - 24Mm, Device Length: 7 - 10Mm, Recommanded Sheath Size: 6 - 12F Dcgi Approved 278 Vsd Device ( Muscular ) , Compatible With Lower Sheath Device Length: 7Mm, Right Disc Diameter: 10 -30Mm, Waist Diameter: 4 - 24Mm, Left Disc Diameter: 10 - 30Mm, Recommended Sheath Size: 6 - 12F Dcgi Approved 279 Asd Device, Compatible With Lower Sheath Device Size: 5 - 42Mm, Right Disc Diameter: 13 -52Mm, Waist Length: 3.5 - 4.5Mm, Left Disc Diameter: 17 - 56Mm, Recommended Sheath Size: 7 - 14F Dcgi Approved 280 Delivery System - Asd / Vsd / Pda Occluders All Sizes Dcgi 281 Occlunix 45° Delivery System With Delivery Sheath, Dialator, Loader, Hemostatic Valve And Delivery Cable For The The Delivery Of Asd Occluder Sheath Size: 7 - 14F, Length 856Mmdcgi 282 Occlunix 180° Delivery System With Delivery Sheath, Dialator, Loader, Hemostatic Valve And Delivery Cable For The The Delivery Of Pda & Vsd Occluder Sheath Size: 7 - 14F, Length 856Mmdcgi 283 Soft, Atraumatic Tip Reduces Potential Vessel Trauma, High- Torque Shaft With Both Braided And Non Braided Shafts Improves Vessel Selection, Super Radiopaque Tip Assures Excellent Visibility Underfluroscopy, Utrablend Tip-Shaft Transition Assures Smooth Safe Tracking Tip Sizes: Jl3.5 - Jl5.0, Jr3.5 - Jr5.0, Pig: P-Tail, Amplatz Left I, Amplatz Left Ii, Amplatz Left Iii, Length: 100Cm, 5 & 6Fdcgi 284 Soft, Atraumatic Tip Reduces Potential Vessel Trauma, High- Torque Shaft With Both Braided And Non Braided Shafts Improves Vessel Selection, Super Radiopaque Tip Assures Excellent Visibility Underfluroscopy, Utrablend Tip-Shaft Transition Assures Smooth Safe Tracking Tig, Length: 100Cm Dcgi 285 Excellent Kink Resistance-Polymer Material With Unique Braid Design Provides Kink Resistance, Superior Support-Multi Density Braid Design Provides Superior Back-Up Support, Radiopaque Soft Tip Ensures Atraumatic Navigation, Large Lumen Design Provides Smooth And Compatible Pathway For Multiple And Various Devicesebu 3.0, Ebu 3.5, Jl3.0- 3.5, Jr-3.0-3.5, Al 1.0 - 2.0, Ar 1.0-2.0, Mpa, Rdc, 6F & 7F Dcgi 286 Hydophilic Coating For Low Friction Endovascular Steerability And Trackability, Radiopaque Polyurethene Jacket For Good Fluroscopic Visibility And Controlled Navigation, Prevents Kinking For Swift Device Exchange Curve: 0.032 - 0.038, Length: 150 - 260Cm, Types Available: Angled & Straight Dcgi 287 Hydophilic Coating For Low Friction Endovascular Steerability And Trackability, Radiopaque Polyurethene Jacket For Good Fluroscopic Visibility And Controlled Navigation, Prevents Kinking For Swift Device Exchange Curve: 0.032 - 0.038, Length: 150 - 260Cm, Types Available: J & Straight Dcgi 288 Balance Between Tip Flexibility And Body Stiffness, 2 Cm Radiopaque Distal Tip, 1:1 Torque Response, Shapable Distal Tip Diameter: 0.36Mm, Length: 185 - 300, Radiopaque Length: 2Cm, Tip Flexibility: Floppy, Standard, Intermediate & Extra Support, Tip Shape: Straight & J, Tip Coating: Hydrophilic Dcgi 289 Excellent Transition Helps Facilitate Smooth Insertion Into Vessel, Color Coded Hubs Match Standard French Sizing For Easy Identification, Snap Fit Dialator Eliminates Slipping During Insertion Size: 4 - 7F, Guidewire: 0.021 - 0.025, Lenght: 7Cm, Needle: 20G Dcgi 290 Excellent Transition Helps Facilitate Smooth Insertion Into Vessel, Color Coded Hubs Match Standard French Sizing For Easy Identification, Snap Fit Dialator Eliminates Slipping During Insertion Size: 4 - 8F, Guidewire: 0.038, Lenght: 11Cm, Needle: 18Gdcgi 291 Extremely Low Insertion Forces Increase Accessebility And Reduce Tissue Trauma, Tapared Hub Inner Diameter Facilitates Insertion Of The Guder Wire Smoothly Size: 18G & 20G, Lenght: 07Cm, Hub: Straightdcgi 292 Extremely Low Insertion Forces Increase Accessebility And Reduce Tissue Trauma, Tapared Hub Inner Diameter Facilitates Insertion Of The Guder Wire Smoothlysize: 18G & 20G, Lenght: 04Cm, Hub: Y Portdcgi 293 Y- Connector, Minimizing Blood Loss And Optimizing Control Of Interventional Devices, Crystal Body For Easy Bubble Detection, Different Open Close Designs- Push- Click, Push-Pull, Screw Type, Double Screw Type ( All Types With Extention Tubing, Stopclock, Torque Device And Insertion Tool ) Dcgi 294 Manifold, Smooth-Turning Handles, Transparent Body For Visual Control, Up To 500Psi Pressure Stability For Manual Injection 250 Psi - 500 Psi, Right On / Off 2Port & 3Port Dcgi 295 High Pressure Tubing Lines, Transparent For Visual Control, Tubing Lengths Customized For All Needs, Pressure Resistance Up To 1200Psi, Dcgi Approved, 296 Indeflator, Quick Trigger Release Enabling One Handed Operation, No Need To Dial Down The Pressure Before, Ergonomic Pistol Grip Design Fits Comfortably In Either Hand, , Torque Control For Precise Pressure Placementguntype & Regular, Pressure: 30Atm, Stop Clock: 3Way Dcgi 297 Pva Particles- For Peripheral Av Malformations, Sizes- 45–150, 150–250, 250–355, 355–500, 500–710, 710–1, 000, 1, 000–1, 180, Color Coded Vials, Irregularly Shaped Flakes 298 Cerebral Coils, All Available Diameters, All Available Lengths 299 Ivc Filter, 30 Cm Filter Diameter, 7 F Size 300 Embolization Coils – Platinum Type, Material-Platinum, All Available Diameters, All Available Lengths 301 Embolization Coils- Inconel Type, Material –Inconel, All Available Diameters, All Available Lengths 302 Detachable Medusa Multicoil, Material -Polymer 303 Detachable Idc Soft Interlocking Detachable Coils, Platinum Tungsten Alloy 304 Trufill Pushable Coils, Platinum With Nylon Fibers 305 Azur Cx Peripheral Coil Detachable 0.018 System, Platinum And Hydrogel 306 Cyanoacrylate Glue For Embolisation, 307 Poppyseed Oil, Injection As A Radio-Opaque Contrast Agent That Is Used To Outline Structures In Radiological Investigations 308 Coronary Sinus Balloon Occlusion Catheter.Balloon Diameter – 10Mm, 15Mm, Balloon Lengths-10Cm, 20Cm, Catheter Lengths – 80Mm, 100Mm, 200Mm, Guidewire Compatibility- 0.025”, 0.035” 309 Drug Eluting Balloon.Balloon Size: 1.5Mm – 6 Mm / Length: 10 Mm -250Mm 310 Cutting Balloon.Balloon Size: 2Mm – 4 Mm / Length: 6 Mm, 10Mm, 15Mm 311 Scoring Balloon.Balloon Size: 2Mm – 4 Mm / Length: 6 Mm, 10Mm, 15Mm 312 Bypass Graft Balloon.Balloon Size: 1.5Mm – 6 Mm 313 Tiger Curve Catheter, 5F-6F / 100 Cm, Side Hole 1, 3 Curved 314 Tig Catheter.5F-6F / 100 Cm, 315 Tiger Curve Diagnostic Catheter For Radial Angiogram-Size:5F-6F / 100 Cm, Soft Catheter With 1:1 Torque Control Internationally Accepted Terumo Quality And Equal Performance Needed For Patient Safety & To Avoid Spasm Of Radial Artery, 5F-6F / 100 Cm, 316 Tiger Curve Diagnostic Catheter For Brachial Angiogram, Size 5F-6F / 100 Cm, , 5F-6F / 100 Cm, 317 Tig4, ( Tiger Curve ) Diagnostic Catheter, Size:5F-6F / 100 Cm, Soft Catheter With Torque Controlinternationally Accepted Terumo Quality And Equal Performance Needed For Patient Safety & To Avoid Spasm Of Radial Artery, 5F-6F / 100 Cm, 318 Tig4.5, ( Tiger Curve ) Diagnostic Catheter, Size:5F-6F / 100 Cm, Soft Catheter With Torque Controlinternationally Accepted Terumo Quality And Equal Performance Needed For Patient Safety & To Avoid Spasm Of Radial Artery, 5F-6F / 100 Cm, 319 Tr4 ( Tiger Curve ) Guide Catheter, Size:5F-6F / 100 Cm, Soft Catheter With Torque Controlinternationally Accepted Terumo Quality And Equal Performance Needed For Patient Safety & To Avoid Spasm Of Radial Artery, 320 Pigtail, 5F & 6F / Lengths 100, 110 & 125Cm, Side Holes 6 & 12 321 Angled Pigtail Catheter, 5F & 6F, Curves145& 155, Lengths 100, 110 &125Cm, Side Holes 6 & 12 322 Glidecath Hydrophilic Catheter, 5F-6F / 100 Cm, 125Cm 323 Multipurpose ( Mpa1, A2, B1, B2 ) Diagnostic Catheter , 5F-6F / 100 Cm, 324 Cerebral Diagnostic Catheter, 5F-6F / 100 Cm, 325 Amplatz Catheter Left / Right-Ar / Al1, 2 Diagnostic Catheter, 5F-6F / 100 Cm, 326 Judkins Right / Left Diagnostic Catheter ( Jr / Jl ) , 4F-7F / 100 Cm, 125 Cm 327 Mother And Child Catheter - Size – 5F-8F / Length 25Cm , 5F-8F, Rapid Exchange Length 25 -Cm 328 Mother And Child Catheter Size – 6F / Extension Length 15Cm 329 Ntr ( No Torque Right ) Catheter, Useful For Engaging Anteriorly Angulated Bypass Graft ( Including Lima From The Left Radial Approch& Rima From The Femoral Approach ) 330 Unique Hydrodynamic Surface For Low Resistance- 5F &6F -Large Inner Lumen - Superior Kink Resistance- 1-To1 Torque Catheter With Double Wire Stainless Steel Braiding In 6F Atraumatic Soft Tip 331 Catheter Available In 5F Results In Very Low Friction Large Inner Lumen. Superior Kink Resistance 1-To1 Torque. Atraumatic Soft Tip 332 Extra Back Up Guiding Catheter For Ptca, 6F-8F / 47-110 Cm, Steel Braided 333 Extra Back Up Guiding Catheter For Ptca, 6F-8F / 47-110 Cm, Steel Braided 334 Judkins Left / Right Guiding Catheter For Ptca, 6F-8F / 47-110 Cm, Steel Braided 335 Judkins Left / Right Guiding Catheter For Ptca, 6F-8F / 47-110 Cm, Steel Braided 336 Judkins Right Guiding Catheter ( Paediatric ) , 4F, 5F 337 Tiger Curve Guiding Catheter For Ptca ( Tr-4 ) , 6F-8F / 47-110 Cm ) 338 3 Dimensional Right Guiding Catheter ( 3Drc ) For Ptca, 6-8F / 47 -110 Cm 339 Contralateral Left Support ( Cls ) Guiding Catheter For Ptca, 6-Ff / 47 -110 Cm 340 Extra Backup Left Guiding Catheter ( Xbu ) For Ptca, 6F / 47 -110 Cm 341 Ikari Curve Left Guiding Catheter For Ptca, 6-8F / 47 -110 Cm 342 Ikari Curve Right Guiding Catheter For Ptca, 6-8F / 47 -110 Cm 343 Internal Mammary Guiding Catheter For Ptca, 6F / 47 -110 Cm 344 Femoral Right Guiding Catheter For Ptca ( Fr ) , 5-8F / 47 -110 Cm 345 Femoral Left Guiding Catheter For Ptca ( Fl ) , 5-8F / 47 -110 Cm 346 Multipurpose Guiding Catheter For Ptca, 6-8F / 47 -110 Cm 347 Voda Right Guiding Catheter For Ptca, 6-8F / 47 -110 Cm 348 Voda Left Guiding Catheter For Ptca, 6-8F / 47 -110 Cm 349 Amplatz Right Guiding Catheter For Ptca, 6-8F / 47 -110 Cm 350 Amplatz Left Guiding Catheter For Ptca, 6-8F / 47 -110 Cm 351 Short Amplatz Right Guiding Catheter, 5-8F, Curve Style 1, 2 352 Short Amplatz Left Guiding Catheter, 5-8F, Curve Style 0.75, 1, 1.5, 2, 2.5, 3, 4 353 Ptca Guide Catheter With Large, Smooth Inner Diameter Reduces Friction During The Delivery Of Intervention Devices. 354 Large Lumen Guiding Catheter, Uniquehydrophilic Coating ( 68 In Middle, 7Cm Distal And 25 Cm Proximal Is Uncoated. ) Balancing Flexibility And Support. All Curves 5F-8F Are Available. 355 Guiding Catheter For Renal, Size – 7-9 / Length – 55, 96 356 Peripheral Guiding Catheter, Size – 6-8 / Length – 55, 90 357 Peripheral Guiding Catheter, 6F , 50 Cm Length 358 Peripheral Guiding Catheter, 7F , 50 Cm Length 359 Peripheral Guiding Catheter, 8F , 50 Cm Length 360 Paediatric Diagnostic Catheters, Catheter Make With Sixteen Stainless Steel Wire Braids To Impart 1:1 Torque Control To Catheter Tip And Maximize Pushability, Made Of Nylon Material Which Resists Softening During Prolonged Catheter Manipulation. Short, Flexible Atraumatic Catheter Tip To Maintain Stability During Injection. Catheter Tip Shapes - Jl1 -4; Jr 1-4; Pigtail, Pulmonary Curve Catheters, Multipurpose Catheters ( A, B, Nih, Vert ) , Cobra ( C1-C3 ) , Ar ( 1, 2 ) , Al ( 1, 2 ) , Head Hunter ( H1-H3 ) , Sim ( 1-3 ) , 4 Fr To 7Fr. . Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety 361 Balloon Floatation Right Heart Catheter : Balloon Tipped Catheters For Right Heart Study, For Pressure Measurement - Single / Double Lumen. . Internationally Accepted Quality And Equal Performance Needed For Patient Safety 362 Balloon Floatation Right Heart Catheter: Balloon Tipped Catheters For Right Heart Angiography - With Multiple Holes. . Internationally Accepted Quality And Equal Performance Needed For Patient Safety 363 Carotid Guiding Catheter ( Guide Catheter For Neuro ) , Size: 7-9 / 55, 96 364 Sheathless Guiding Catheter For Ptca, 6.5 To 7.5 F, 89 Cm Length 365 Support Catheter For Flush Total Occlusions And Angulated Lesions -Straight, 7Fsize, 7-110 Cm Length 366 Support Catheter For Flush Total Occlusions And Angulated Lesions -Tapered, 7Fsize, 7-110 Cm Length 367 Support Catheter For Flush Total Occlusions And Angulated Lesions -Angled, 7Fsize, 7-110 Cm Length 368 Support Catheter For Flush Total Occlusions And Angulated Lesions -Angled Tapered, 7Fsize, 7-110 Cm Length 369 Support Catheter For Flush Total Occlusions And Angulated Lesions -Tapered, 6Fsize, 83 - 130 Cm Length 370 Support Catheter For Flush Total Occlusions And Angulated Lesions -Angled Tapered, 6Fsize, 83 - 130 Cm Length 371 Guide Extension Catheter: Catheter Length 150Cm, Distal Extension Length -25Cm, Pushwire Length-125Cm With Hydrophilic , Outer Layer Of Distal 21Cm Available In 6F-Id:0.056 In , Od:0.067 In 372 Guide Extension Catheter: Catheter Length 150Cm, Distal Extension Length -25Cm, Pushwire Length-125Cm With Hydrophilic , Outer Layer Of Distal 21Cm Available In 7F-Id:0.062 In , Od:0.075 In 373 Guide Extension Catheter, 120 Cm Proximal Hypotube Shaft, 0.057 ( 1.45 Mm ) Innerdiameter, Hydrophilic Coating, Atraumatic Tip, Extended Length 25Cm, 2 Radio-Opaque Markers 374 Ce Approved , Guide Extension With A Tapered Shaft ( 5.3F To 4.5F ) With A Non Metallic Tip, Tapered Shaft ( 5.3F To 4.5F With A Non Matalic Tip. 375 Guidewire Reentry Catheter With Guidewire, Catheter: Self Orienting Flat Balloon Length 10Mm, 180O Opposed Proximal And Distal Ports With Markers, Working Length-135Cm 376 Multiple Side Hole – Infusion Wire, Diameter:0.035” / Length:145Cm-175Cm 377 Multiple Side Hole –Infusion Catheter And Micro Catheter , Diameter:2.9Mm / Length:150Cm-180Cm 378 Reinforced 18” Endhole-Infusion, Diameter:2.8Mm-2.3Mm / Length:135Cm-Cm-158Cm 379 Reinforced 27”Microcatheter, Diameter:2.8Mm-2.8Mm / Length:135Cm-Cm-150Cm 380 Peripheral Support Micro Catheter 2.6 Fr; 0.18 Compatible, 150 Cm 381 Wire Control Catheter -Cs Catheter, Length-70Cm, Inner Diameter-0.018” 382 Wire Control Catheter -Otw / Rx, Length-140, 145Cm, Inner Diameter-0.018” 383 Multitrack Catheter:Angiographic And Hemodynamic Assessment Catheter, Distal Tip Offset From Catheter’S Central Lumen To Perform Angiography Without Removing Guidewire , Precisely Control Pull-Back Or Push-Up Pressure Tracings, Place Multiple Catheters On The Guidewire, Obtain Simultaneous Pressure Gradient Measurements. Shaft Size 2.5 To 6 Fr, Introducer Size 4- 8Fr, . Internationally Accepted Quality And Equal Performance Needed For Patient Safety 384 Micro Porous Ptfe Balloon Catheter, 0.014 Guide Wire Compatible 385 Double Lumen Otw Catheter For Bifurcation Lesions, 0.014 Guide Wire Compatible, Length – 140Cm 386 Double Lumen Catheter , Ce / Dcgi Approved , Effective Length 1400Mm 387 Focal-Force Pta Balloon Catheter, 0.035 Compatible, Balloon Diameters-5Mm-12Mm, Balloon Length- 4Cm, Catheter Lengths- 50, 80, 135Cm 388 Flow-Directed Balloon Catheter, Size-5.3F, Catheter Length -80Cm, Diameter – 10Mm, Volume-1Ml 389 Dual Balloon Ostial Angioplasty Catheter, Balloon Diameter- Distal: 3, 3.5, 4, 4.5Mm; Proximal: 11Mm Maximum, Catheter Length- 135Cm, Balloon Lengths- Distal: 8; Proximal: 10Cm, Inflation Volume 0.4-Ml ( Proximal 390 Dual Balloon Ostial Angioplasty Catheter, Balloon Diameter- Distal: 3, 3.5, 4, 4.5Mm; Proximal: 11Mm Maximum, Catheter Length- 135Cm, Balloon Lengths- Distal: 8; Proximal: 10Cm, Inflation Volume 0.4-Ml ( Proximal ) 391 Dual Balloon Ostial Angioplasty Catheter , -Otw, 6.6F, Balloon Diameters- Distal: 6, 7Mm Proximal: 14Mm Maximum, Balloon Lengths- Distal: 12, 17Cm; Proximal: 14, 15Cm 392 Cryoplasty Catheter System For Peripheral Bperalloon Angioplasty, 8F, Balloon Diameters-2, 2.5, 3, 3.5, 4, 5, 6, 7, 8Mm, Balloon Lengths- 40, 100, 150Cm 393 Targeted Drug Delivery System, 7F, Adjustable Dual Occlusion Balloons With Diameters- 2.5–10Mm, Balloon Length-1Cm 394 Conformable Occlusion Balloon System For Asymmetric Vessels, Balloon Lengths-7Mm-15Mm, Balloon Diameters-3, 4, 7Mm 395 Occlusion Balloon System For Distal Vessels, Balloon Lengths-10Mm-30Mm, Balloon Diameters-3, 4, 5Mm 396 Compliant Occlusion Balloon System For Neurovascular Interventions, Balloon Diameters - 4Mm-5Mm, Balloon Lengths-10-30Mm 397 Super Compliant Occlusion Balloon System For Neurovascular Interventions, Balloon Diameter-3, 4, 7Mm, Balloon Lengths-5-15Mm 398 2.8 F Proximal Size Microcatheter For Retrograde Approach, Stainless Coil Shaft With 10 Braided Wire, Distal Size: 1.26 F / 150 Cm Length 399 2.1F Proximal Size Specialty Micro Catheter, Long Taper With Platinum Tip And Stainless Steel Rope, Distal Size: 1.8F / 135 Cm Length 400 2.6 Fr Proximal Size Specially Micro Catheter, Ong Taper With Platinum Tip And Stainless Steel Rope, Distal Size: 2.1 Fr / 135 Cm Length. 401 2.9 Fr Proximal Size Ordinary Micro Catheter, Distal Size: 2.2 – 2.4 Fr / 150 Cm Length. 402 130 & 150 Cm Stainless Steel Braide , Hydrophilic Coating , Tapered Inner Shaft With Floppy Distal 13 Cm Segment, Proximal Size 2.6 F , Distal Size 1.8 F , Radio Opaque Tip 403 Micro Catheter:Tip 1.4 Frhydrophilic Coated Shaft Length 135Cm, Shaft Outer Diameter :Distal-1.9Fr, Proximal:2.6Fr.Shaft Inner Diameter -Distal:0.017Fr, Proximal:0.022Frwith Unique Braiding For Flexibility And Kink Resistance 404 2.7 F Proximal Size Micro Cathetre With 021 Hydrophilic Coating Wire, Tungsten Coil Pitch, Distal 2.9 F, Length 130 Cm 405 Twin Lumen Microcatheter 406 Entry Profile 1.6 Fr, Tapered And Robust Tip Material , Braided Shaft Hight Pushability With Hard Proximal Shaft .Shaft Length 135Cm, With Hydrophilic Coating 43Cm 407 2.8Fr And 2.5 Fr Micro Cathetre For Used In Small Vessel Or Super Selective Anatomy .For Pheripheral And Coronary Use , Inner Diameter 0.21&0.25 , Length 100, 135, 150Cm 408 Microcatheter For Delivery Of Micro Coils, Vortec Fiber Braided Microcatheter, Length 130 And 150 Cm, Proximal Size 3Fr, Distal Size 2.5 Fr, End Hole Diameter 0.021 Inch, With Radio Opal Tip And Hydrophilic Coating 409 Microcatheter For Delivery Of Micro Coils, Capable Of Injection , Vortec Fiber And Platinum Braided Microcatheter, Length 105 To 150 Cm, Proximal Size 3Fr, Distal Size 2.8 Fr, End Hole Diameter 0.027 Inch, With Radio Opal Tip And Hydrophilic Coating 410 Diagnostic Guidewire - Exchange Length Ptfe Coated , Straight And Jtipped : Diagnostic Guidewire - Single Length Ptfe Coated , Straight And Jtipped - 018, 021, 025 Inches 260Cm 411 Diagnostic Guidewire - Single Length Ptfe Coated , Straight And Jtipped : Diagnostic Guidewire - Single Length Ptfe Coated , Straight And Jtipped - 018, 021, 025 Inches 150Cm 412 185 Cm Long Floppy Work Horse Wire For Ptca-Straight / J Tip -Core Material Stainless Stee 413 185 Cm Long Intermediate Work Horse Wire For Ptca-Straight / J Tip -Core Material Stainless Steel 414 185 Cm Long Extrasupport Work Horse Wire For Ptca-Straight / J Tip -Core Material Stainless Steel 415 182 Cm , 300 Cm , Spring Coil , Core To Tip Design, 0.014 With 0.8 Tip Load , Ptca Work Horse Wire-Straight / J Tip 416 190 Cm , 0.014 , Hydrophilic Distal 30 Cm & Ptfe Proximal Shaftlong Ptca Work Horse Wire-Straight / J Tip -Core Material Stainless Steel 417 180 Cm Long, 0.8 Tip Load , 30 Mm Silicone Coating From Tip, Straight / J Tip -Core Material Stainless Steel 418 190 Cm Long, 0.8Tip Load , 12 Cm Spring Coil Length , Stainless Steel High Tension Core -Straight / J Tip 419 180 Cm Long, 0.5Tip Load Ptca Work Horse Wire -Straight / J Tip 420 180 Cm Long, Core To Tip Design , 0.014, 0.7 Tip Load, Hydrophobic , Extra Support Wire, Straight / J Tip 421 Us Fda Approved 190 , 300 Cm Length, Nitinol Core, Ptca Work Horse Wirewith Polymer Sleeve With Soft Tip Load Of <1Gm & Shaping Ribbon Design .7G Tip Load Straight / J Tip 422 Us Fda Approved 190 , 300 Cm Length, Nitinol Core, Ptca Work Horse Wirewith Polymer Sleeve , With Soft Tip Load Of <1Gm & Shaping Ribbon Design .7G Tip Load Straight / J Tip 423 Us Fda Approved190 , 300 Cm Length, Hydrophobic Coating Type Nitinol Core, Ptca Work Horse Wire , With Polymer Sleeve , With Soft Tip Load Of <1Gm & Shaping Ribbon Design .7G Tip Load Straight / J Tip 424 Us Fda Approved 190 Cm Long, Tip Load-0.8Floppy Work Horse Wire For Ptca , Straight / J Tip, Core Material Stainless Steel , Polymer Tip , Core To Tip Design , 0.014 With 0.8 Tip Load , With Hydrophilic Tip And Light Support 425 Us Fda Approved 190 Cm Long, Tip Load- 1 Intermediate Work Horse Wire For Ptca , Straight / J Tip, Core Material Stainless Steel , Polymer Tip , Core To Tip Design , 0.014 With 0.8 Tip Load , With Hydrophilic Tip And Light Support 426 Us Fda Approved 190 Cm Long, Tip Load- 1.2 Extra Support Work Horse Wire For Ptca, Straight / J Tip, Core Material Stainless Core Material Stainless Steel , Polymer Tip , Core To Tip Design , 0.014, With Hydrophilic Tip And Light Support, 427 195Cm-Length, Hydrophilic Coating-33Mm, 0.014”Diameter, ( Floppy, Intermediate, Standard ) Work Horse Wire For Ptca, Straight Tip / J Tip 428 Hydrophilic Coating-33Mm, 300Cm-Length, 0.014”Diameter, ( Floppy, Intermediate, Standard ) Work Horse Wire For Ptca, Straight Tip / J Tip 429 190 Cm Long, Tapered Tip , 0.014 Tapering To 0.009, 0.8 Tip Load Cto Wire For Ptca, Tapered Tip 430 190 Cm Long, 0.014 Tpering To 0.010 , Hydrophylic, 1 Gm Tip Load Cto Wire For Ptca, Tapered Tip 431 300 Cm Length, 0.014 Diameter, Straight Tip Shape, 0.8 Tip Load Double Length Cto Wire For Ptca, Straight Tip 432 300 Cm Long, Tapered Tip , 0.6 Tip Load Cto Wire For Ptca, Tapered Tip 433 180 Cm Length, 0.014 Diameter, Straight Tip Shape, 0.8 Tip Load Double Length Cto Wire For Ptca, Straight Tip 434 180 Cm Length, ( Straight Tip Shape , 3-4.5 Tip Load Cto Wire For Ptca, Silicone Coating Over Spring Coil , Straight Tip 435 180 Cm Length, ( Straight Tip Shape, ) 6-12 Tip Load Cto Wire For Ptca, Straight Tip 436 180Cm Length, 9- 12 Tip Load Cto Wire For Ptca ( Tip Shape Straight, ) , Tapered & Straight Tip 437 180Cm Length, 20 Tip Load Cto Wire For Ptca ( Tip Shape Straight ) , Tapered & Straight Tip 438 180Cm Length, 1 Tip Load Cto Wire For Ptca ( Tip Shape Straight ) , Hybrid Wire That Fuses Nitinol & Stainless Steel, , 180 Cm & 300 Hydrophilic Coating Over The Distal 24.8Cm Of The Distal Tip , Silicone Tip On The Distal 2Mm , Nitinol Floppy Tip, Straight Tip 439 180Cm Length, 3.6 Tip Load Cto Wire For Ptca ( Tip Shape Straight ) , Hybrid Wire That Fuses Nitinol & Stainless Steel, 180 Cm & 300 Hydrophilic Coating Over The Distal 24.8Cm Of The Distal Tip , Silicone Tip On The Distal 2Mm , Nitinol Floppy Tip, Straight Tip 440 180Cm Length, 3.6 Tip Load Cto Wire For Ptca ( Tip Shape Straight ) , Hybrid Wire That Fuses Nitinol & Stainless Steel, 180 Cm & 300 Hydrophilic Coating Over The Distal 24.8Cm Of The Distal Tip , Silicone Tip On The Distal 2Mm , Nitinol Floppy Tip, Straight Tip , 1:1 Torque 441 Fda Approved190cm Length, 1.7, Tip Load Cto Wire For Ptca ( Tip Shape Straight ) , Stainless Steel Core , Core To Tip Design , 0.014 Wire With 0.010 Tip& Hydrophilic Coating, Straight Tip 442 Fda Approved 190Cm Length, 4.7 Tip Load Cto Wire For Ptca, Steel Core , Spring Coli Tip , Core To Tip Design , 0.010 Tip , Hydrophilic Tip Coating, Tip Shape Straight , Straight Tip 443 Us Fda Approved 190Cm , 300 Length, 1.5 Tip Steel Core , Polymer Tip , Core To Tip Design , 0.014 Wire With Tip Load Of 1.5 Gm , Hydrophilic Coating , Cto Wire For Ptca, J Tip 444 Us Fda Approved190cm , 300 Length, 2.7 Tip , Steel Core , Polymer Tip , Core To Tip Design , 0.014 Wire With Tip Load Of 2.7 Gm , Hydrophilic Coatingload Cto Wire For Ptca, J Tip 445 190Cm , 300 Length, 4.1 Tip Load Steel Core , Polymer Tip , Core To Tip Design , 0.014 Wire With Tip Load Of 4.1 Gm , Hydrophilic Coatingload Cto Wire For Ptca, J Tip 446 330Cm Length, 3 Tip Load Cto Wire For Ptca, Tip Shape Straight , For Guidewire Externalisation For Retrograde Procedures 447 Us Fda Approved 190Cm Length, 4.8- 9.7 Tip Load Cto Wire For Ptca, Spring Coil Tip , Core To Tip Design , 0.012 Diameter , Straight Tip 448 Us Fda Approved 190Cm Length, 12.5- 13.3 Tip Loadsteel Core , Coil Tip , Core To Tip Design , 0.010 To 0.009 Tapered Tip , Cto Wire For Ptca ( Tip Shape Straight , Hydrophilic Coating Straight Tip 449 190Cm , 300 Cm Length, 0.014 Tapering To 0.010, 1.7 Tip Load Cto Wire For Ptca , Tapered Tip, 1 Mm Preshaped Tip, Microcone Tip 450 190Cm , 300 Cm Length, 0.014 Tapering To 0.011, 3.5Tip Load Cto Wire For Ptca Tip Shape Tapered , Tapered Tip1 Mm Preshaped Tip, Microcone Tip 451 190Cm , 300 Cm Length, 0.014 Tapering To 0.012, 4.5 Tip Load Cto Wire For Ptca ( Tip Shape Tapered , Tapered Tip, 1 Mm Preshaped Tip, Microcone Tip 452 0.018 Diameter Peripheral Floppy Wire ( Tip Shape Straight / Length 80, 180, 300Cm, Straight Tip 453 0.025Diameter Peripheral Floppy Wire ( Tip Shape Straight / Length 80, 260, 300Cm, Straight Tip 454 0.035 Diameter Peripheral Wire ( Tip Shape Straight / Length 180, 260Cm, Straight Tip 455 0.018 Diameter Peripheral Intermediate Wire ( Tip Shape Straight / Length 80, 180, 300Cm, Straight Tip 456 0.018 Diameter Peripheral Standard Wire ( Tip Shape Straight / Length 80, 180, 300Cm, Straight Tip 457 0.025 Diameter, Peripheral Intermediate Wire ( Tip Shape Straight / Length 260, 180, 300Cm, Straight Tip 458 0.025Diameter, Peripheral Standard Wire ( Tip Shape Straight / Length 260, 180, 300Cm ) , Straight Tip 459 195Cm-Length, Hydrophilic Coating-35Mm, 0.014”Diameter, ( Tipload-12G ) , Straight Tip / J Tip 460 Hydrophilic Coating-35Mm, 300Cm-Length, 0.014”Diameter, ( Tip Load 12G ) , Straight Tip / J Tip 461 195Cm-Length, Hydrophilic Coating-33Mm, 0.014”Diameter, Stainless Steel Coil Length-26Mm, Floppy & Standard, J Tip 462 Hydrophilic Coating-33Mm, 300Cm-Length, 0.014”Diameter, Stainless Steel Coil Length-26Mm, Floppy & Standard, J Tip 463 195Cm-Length, Hydrophilic Coating-27Mm, 0.014”Diameter, With Polymer Cover, Floppy, Intermediate, Standard, Straight Tip / J Tip 464 Hydrophilic Coating-27Mm, 300Cm-Length, 0.014”Diameter, With Polymer Cover, Floppy, Intermediate, Standard, Straight Tip / J Tip 465 185Cm-Length, Hydrophilic Coating-40Mm, 0.014”Diameter, Stainless Steel Coil Length-2Cm, Floppy, Intermediate, Standard, Straight Tip / J Tip 466 180 Cm Long , 0.5G Tip Load Ptca Work Horse Wire Straight / J Tip . Slip Coatcoating Over Yhe Spring Coil , Radiopaque Length -30Mm , Silicon Coating Tip 467 180 Cm Long , 0.8G Tip Load Ptca Wire , Staright / J Tip .Slip Coat Coating Over The Jacket , Polimer Jacket Coating , Radiopaque Length -30Mm 468 180 Cm Long , 0.8G Tip Load Ptca Wire , Staright Tip .Polimer Jacket Coating 20 Cm, , Slip Coat Coating Over The Jacketradiopaque Length -30Mm 469 180 Cm Long , 0.6G Tip Load Cto Wire .Polimer Jacket Coating 16 Cm , Slip Coat Coating Over The Jacket , Tapered Tip , Radiopaque Length -16Cm 470 180 Cm Long , 1G Tip Load Cto Wire .Polimer Jacket Coating 16 Cm , Slip Coat Coating Over The Jacket , Tapered Tip , Radiopaque Length -16Cm 471 180Cm Long , 1.7G Tip Load Cto Wire Slip Coat Coating Over The Spring Coil , T Apered Tip , Radiopopaque Length-15Cm 472 180Cm Long , 3.5G Tip Load Cto Wire Slip Coat Coating Over The Spring Coil , Tapered Tip , Radiopopaque Length-15Cm 473 180Cm Long , 4.5G Tip Load Cto Wire Slip Coat Coating Over The Spring Coil , Tapered Tip , Radiopopaque Length-15Cm 474 180 Cm Long , 3G Tip Load Cto Wire .Silicone Coating Over The Spring Coil , Radiopaque Length-11Cm 475 180 Cm Long , 4.5G Tip Load Cto Wire .Silicone Coating Over The Spring Coil , Radiopaque Length-11Cm 476 180 Cm Long , 6G Tip Load Cto Wire .Silicone Coating Over The Spring Coil , Radiopaque Length-11Cm 477 180 Cm Long , 9G Tip Load Cto Wire .Silicone Coating Over The Spring Coil , Radiopaque Length-20Cm 478 190 Cm Long 0.5G Tip Load Cto Wire 2.5 Cm 479 190 Cm Long , 3G Tip Load Cto Wire Hydrophilic Coating 480 180 Cm Long , 12G Tip Load Cto Wire , Slip Coat Coating Over The Spring Coil , Excluding The Tip, Tapeared Tip , Radiopaque Length 20Cm 481 190Cm Long, Cto Wire Designed For Intentional Wiring, Hydrophilic Wire With Uncoated Distal Tip, Slit Coat Technology With Act One And Xtrand Coil Structure, All Tip Loads 2.0, 4.0, 6.0Gf 482 300Cm Long , 0.014 Guide Wire With 3Gf Tipload, Core To Tip Design, 40Cm Hydrophilic Coating, 11Cm Spring Coil Length, 11Cm Radioopaque Segment 483 180Cm Long , 0.014 Guide Wire With 3Gf Tipload, Core To Tip Design, 40Cm Hydrophilic Coating, 11Cm Spring Coil Length, 11Cm Radioopaque Segment 484 180 Cm Extra Support Long Ptca Wire 0.7Gtip Load Silicone Coating Over The Spring Coil Radiopaque Length-4Cm 485 330Cm Length , 3G Tip Load Cto Wire For Ptca , Radiopaque Length-3Cm 486 300Cm Length Straight Tip Shape, 0.8G Tip Load Double Length Cto Wire For Ptca 487 Extension Wire 150Cm .Compatible With All Ptca Wire 488 0.89Mm ( 0.035” ) Hydrophilic Spring Coil Guide Wire 489 Hydrophilic Coating-40Mm, 300Cm-Length, 0.014”Diameter, Stainless Steel Coil Length-2Cm, Floppy, Intermediate, Standard, Straight Tip / J Tip 490 Fda Approved Nitinol Wire With Soft & A Traumatic Tip With Hydrophilic Coating At The Distal End & Hydrophobic At The Proximal End Core To Tip Design, 0.8 G Tip Load, Straight Tip / J Tip 491 Extra Support Wire Guide For Neonatal Interventions: Nitinol Core, Pte Coating , Flexible Platinum Tip. 1:1 Torque Control. 014 And 018 Inch, 180, 270 And 300 Cm Lenth. . Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety 492 Ptfe Guidewire:018, 021, 025 Inch, Regular And Exchange Length 493 Fda Approved Nitinol Wire With Soft & A Traumatic Tipfor Excellent Torque And Tip Control With .9G Tip Load, Stainless Steel, Straight Tip / J Tip 494 Fda Approved Peripheral Guide Wire For Cto, Stainless Steel With Microglide Coating , 4.8 To 13 Gm Tip Load , 190, 300Cm Length 495 Doc Extension 0.14-0.018 X 145 Cm , Can Be Detached After Use, Designed To Provide The Necessary Length To Allow The Exchange Of One Cathether For Another While Maintaining The Position Of The Guide Wire In The Artery 496 Heparin Coated , Braided Nitinol Filter With Gold –Tungsten Loop, 3-6Mm Lumen Size Distal Embolic Protection Device For Svg Interventions, 0.014”, Wire Length: Otw / Rx: 190 / 320 Heparin Coated Filter Size: 3-6Mm 497 0.018” Wire, Braided Nitinol Heparin Coated Filter With Gold –Tungsten Loop, 3-7Mm Lumen Size Distal Embolic Protection Device For Carotid Interventionscompatible Vessel Diameter-2-7Mm, Heparin Coated Filter 498 Braided Nitinol Heparin Coated Filter With Gold –Tungsten Loop, 0.018” Wire, 3-7Mm Lumen Size Distal Embolic Protection Device For Lower Limb Interventions, Compatible Vessel Diameter-2-7Mm, Heparin Coated Filter 499 Polyurethane Filter Pore Size-110 Micron With Nose Cone, 2.25-3.5F Lumen Size Distal Embolic Protection Device For Carotid Interventions, Wire Length: Otw / Rx: 190 / 300 Filter Size: 3-7F 500 3.5-5.5F Lumen Size, Polyurethane Filter Pore Size-110 Micron With Nose Cone, Distal Embolic Protection Device Forcarotid Interventions, Wire Length: Otw / Rx: 190 / 300 Filter Size: 3-7F 501 Guidewire With 90 0 Rotated Filter Basket With Obturator, Pore Size 150Μm Distal Embolic Protection System, Compatible Vessel Diameter-3.25-7Mm 502 Self Centering Umbrella Design Filter With 8 Nitinol Struts, Emboli Capture Guide Wire System For Carotid Interventions, Compatible Vessel Diameter – 3-7.5Mm 503 Barewire Filter Delivery Wire Type Distal Protection Device For Coronary Interventions, Unconstrained Filter Diameter – 5.0Mm, Compatible Vessel Diameter - 2.5–4.8 Mm, With 120Um Pore Size 504 Barewire Filter Delivery Wire Type Distal Protection Device For Peripheral Interventions, Unconstrained Filter Diameter -7.2Mm, Compatible Vessel Diameter - 4.0-7.0 Mm 505 Polethylene Terephthalate Type Filter Distal Embolic Protection Device, Compatible Vessel Diameter-3.5 -7Mm 506 Ptfe Type Distal Protection Device, Filter With 100 Micron Poresand Hydrophilic Heparin Coating With Diamond Frame, Distal Protection Device -Filter 507 Proximal Cerebral Protection Device, Reference Common Carotid Artery Diameter -5–13 Mm 508 Squeeze Handle With Prime Lock Inflation Device, Pressure Range: 0-30 / Barrel Volume: 20 Ml 509 Ordinary Handle Latch Type Inflation Device, -Pressure: 0-30, 510 Inflation Device, Piston Handle Type Intra-Cam Locking Mechanism, Barrel Volume-20Ml, Pressure Range: 0-30 511 Inflation Device, Very High Pressure Pressure Range: 0-50 Atm 512 High Pressure Inflation Device Piston Handle With Finger Latch Mechanism, Barrel Volume- 20Ml, 0-30 513 Fda Approved Inflation Device With 20 To 30 Atmosphere 514 Inflation Device Maximum Pressure Of 30 Atm, 20Ml Clear Syringe Barrel With Smooth Moving Plunger, Self Locking Mechanism For Easy Locking As Well As Gradual And Rapid Pressure Release Ergonomic Handle And Precision Manometer. 515 Y Connector 516 Silicon Valve Material Type Y Connector, Bonded Extension Tube Length 20Cm, Push-Pull Type Hemostatic Valve 517 Ordinary Y Connector, Bonded Extension Tube, Push-Pull Type Hemostatic Valve 518 Rotating Y Connector With 2 Way Adjustable Valve, Rotating Y-Connector / 2-Way Adjustable Valve 519 Rotating Double Y Connector With 3 Way Adjustable Valve, Rotating Double Y-Connector / 3-Way Adjustable Valve 520 High Pressure Resistance Y Connector , Pressure Resistance Of Atleast 8 Atm, Push Pull Type, Inner Lumen Diameter-0.025”, Guidewire Compatibility – 0.010” - 0.014” 521 Ptca Y Connector 400 Kpa Leak-Proof Seal From Proprietary Designed Valve, Open And Close By Twisting, 7F-9F Compatible Lumen Allowing Delivery Of Wide Range Of Devices And Torque And Introducer Fit 0.014-0.021 Guide Wire. 522 Hemostasis Valve :Hemostasis Assembly To Prevent Bleeding From Ends Of Catheters, With Facility Of Side Arm For Flushing And Injection. . Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety 523 Puncture Needle ( Radial ) – Cook Model, 524 Puncture Needle ( 16G, 18G, 7Cm, 20Cm ) 525 Puncture Needle ( 20G, 21G, 4Cm ) 526 Paediatric Pericardiocentasis Kit: Soft Atraumatic, Radio Opaquepigtail Catheter , 5Fr, 30 Cm Long, With Compatible Needle And Guide Wire. . Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety 527 Micro Puncture Needle Multipurpose 528 Micro Puncture Introducer Set; 21 G , 0.018 “, 4 French 529 Micro Puncture Set For Pedal Access With Nitinol Guide Wire And Hemsotatic Valve 530 Radial Sheath Without Nitinolguide Wire, 4F- 7F / Length 5-7Cm - Wire Length 45Cm, Wire Dimension0.025 531 Radial Sheath With Nitinolguide Wire, 4F- 7F / Length 5-7Cm - Wire Length 45Cm, Wire Dimension0.025 532 Radial Sheath 11 Cm Long, Size-4-7F, Length – 11Cm, Guidewire-0.025, 533 Radial Sheath 11 Cm Long, Size-4-7F, Length – 11Cm, Guidewire-0.021, 534 Radial Sheath 5& 7.5Cm Long, Size-4-6F, Length – 5 & 7.5Cm, Guidewire-0.021 535 Radial Sheath With Nitinolguide Wire – Sheath Size Ranging From 6F, Length Ranging From7cm - Wire Length 45Cm, Wire Dimension0.025, Cross-Cut Haemostasis Valve Effectively Avoids Blood Reflux And Air Aspiration 536 Radial Sheeth 10Cm Long, Guide Wire 0.025 ( Plastic ) With Unique Thin Wall Structure For Perform Procedure With Out Upsizing To A Large Sheath With International Terumo Quality. 537 Ts Femoral Sheath: 11 Cm Long Input Ts Femoral Sheath With 0.038 Inch Guide Wire, 6F 538 Ts Femoral Sheath: 23 Cm Long Input Ts Femoral Sheath With 0.038 Inch Guide Wire, 6F 539 5 Cm Long Pediatric Femoral Sheath- With 0.021 Inch Guide Wire , 4-6 F Size 540 Femoral Sheath-Adult 0.035 Inch Guide Wire, 4-10 F Size 11Cm 541 Femoral Sheath-Adult 0.035 Inch Guide Wire, 4-9 F Size 11Cm 542 Femoral Sheath-Adult 0.035 Inch Guide Wire, 4-8 F Size 11Cm 543 25Cm Long, Size Femoral Sheath Size Ranging From6f, With Guide Wire 544 24 Cm Long Femoral Sheath With 0.018-0.038 Inch Straight Tip Guide Wire, 3-9 F 545 25 Cm Long Femoral Sheath Without Guide Without Wire But Compatible With 0.038 Wire, 10-14 F 546 13-80 Cm Long, Large Valve Femoral Sheath, 9-18 F 547 5.5-23 Cm Long, Radial Sheath With 0.018 Inch Guide Wire, 4-6 F 548 5-45 Cm Long, Small Valve Femoral Sheath, 4-8 F 549 90 Cm Long, Brite Tip Interventional Sheath , 4-11 F 550 23 Cm Long Input Ts Femoral Sheath With 0.038 Inch Guide Wire, 5-11 F 551 Pediatric Long Sheaths : Long Guiding Sheaths With Hemostasis Valve , Hydrophilic Coating And Radio Opaque Band, All Available French Sizes Including 4 And 5 Fr , All Curves . Internationally Acceptedcook Quality And Equal Performance Needed For Patient Safety 552 Pediatric Diagnostic Catheters : All Lengths, All Curves, 4F And 5F Compatible 553 28 Cm Long, Sentrant Introducer Sheath With Hydrophilic Coated Guide Wire, 12-26 F 554 Prelude Act Sheath Introducer, 4.5-8.5F 555 Prelude Ease Hydrophilic Femoral Sheath, 4-7F 556 16Cm-45Cm Long Adelante Peelaway Femoralsheath , 6-12.5F 557 7Cm-25Cm Long Adelante Radial With Hemostatic Valve And Sideport For Optimal Radial Access, 4-6F 558 4Cm-6Cm Long Femoral Sheath With 0.021 Inch Guide Wire, 10-25F 559 5Cm-35Cm Long Ultimum Femoral Sheath, 4F-22F 560 5.5Cm Long Femoral Sheath, 4F-11F Size 561 10Cm Long Femoral Sheath -Pediatric, 4F-11F Size 562 11Cm Long Femoral Sheath, 4F-8F Size 563 23Cm Long Femoral Sheath, 4F-8F Size 564 23Cm Long, Femoral Sheath, 9F-11F Size 565 Femoral Sheath 11 Cm Long Size Ranging From 6F, Length – 11Cm, Guidewire-038, Kink-Resistant Cannula Design Integrating A Soft, Flexible Inner Layer With A Stiffer Outer Layer Designed To Increase Bendability And Support, And Decrease Kinking. 566 Femoral Sheeth 11 Cm Long Size Ranging From 7F, Length – 11Cm, Guidewire-038, Kink-Resistant Cannula Design Integrating A Soft, Flexible Inner Layer With A Stiffer Outer Layer Designed To Increase Bendability And Support, And Decrease Kinking. 567 Long Metalic Sheeth Flexible And Kink Resistant Length :45Cm & 7F 568 25Cm Long, Size Femoral Sheath, 5F-11F 569 45-98Cm Long Femoral Sheath With 0.035-0.038 Curved Tip Guide Wire, 5-8 F 570 5.7-11 Cm Long Femoral Sheath With 0.021-0.038 Double Ended 3 Mm J And Straight Tip Guide Wire, 4-9 F 571 Long Guiding Sheath With Coil - Reinforced Construction For Kink Resistance, With Ptfe Coated Largelumen With Hydrophilic Coating And Radio - Opaque Band At The Tip, 4 To 12 Fr Sizes, All Available Tip Curves ( Straight , Mp, Rdc, Cobra ) , Lengths 45, 55, 70, 110 Cms. . Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety, Long Sheath For Paediatric Procedures 572 Long Guiding Sheaths With Hemostasis Valve , Hydrophilic Coating And Radio Opaque Band, All Available French Sizes Including 4 And 5 Fr , Mullins Curve And Childrens Hospital Of Boston Curve. . Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety, Long Sheath - Small Diameter For Neonatal And Paediatric Procedures 573 Straight Hub , Fep Polymer , Radio Opaque , 16-20 G , Puncture Needle 574 Hydrophilic Guide Wire, Black, ( 0.018 - 0.038 X 80 Cm - 180Cm ) , Angled / Straight Tip Type 575 Hydrophilic Guide Wire, Black, ( , 0.35, 150 Cm ) , Angled / Straight Tip Type 576 Hydrophilic Guide Wire, Black, ( , 0.35, 260 Cm ) , Angled / Straight Tip Type 577 Hydrophilic Guide Wire, Black, ( 0.018 - 0.038 X 260 Cm ) , Angled / Straight Tip Type 578 Terumo Type Hydrophilic Guide Wire, ( 0.018 - 0.038 X 80 Cm - 180Cm ) , Angled / Straight Tip Type 579 Terumo Type Hydrophilic Guide Wire, 0.35X150, Angled / Straight Tip Type 580 Terumo Type Hydrophilic Guide Wire, 0.35X260, Angled / Straight Tip Type 581 Terumo Type Hydrophilic Guide Wire, ( 0.018 - 0.038 X 260 Cm ) , Angled / Straight Tip Type 582 150Cm Hydrophilic Guide Wire, Blue, ( 0.018 - 0.038 X 80 Cm - 180Cm ) , Angled / Straight Tip Type 583 Exchange Length Hydrophilic Guide Wire, Blue, ( 0.018 - 0.038 X 260 Cm ) , Angled / Straight Tip Type 584 Diagnostic Guide Wire Single Length , ( 0.018 - 0.038 X 80 Cm - 180Cm ) , Angled / Straight Tip Type 585 Ptfe Coated Guidewire: ( 0.035 X 150Cm ) , Angled / Straight Tip Type 586 Ptfe Coated Guidewire: ( 0.035 X 260Cm ) , Angled / Straight Tip Type 587 Diagnostic Guide Wire, ( 0.018 - 0.038 X 260 Cm ) , Angled / Straight Tip Type 588 Ptfe Coated Guidewire, ( 0.018 - 0.038 X 80 Cm - 180Cm ) , Angled / Straight Tip Type 589 Ptfe Coated Guidewire, ( 0.018 - 0.038 X 260 Cm ) , Angled / Straight Tip Type 590 Amplatz Wire, Lengths- 260, 300Cm, Tip - Straight / Shapable, 0.035” 591 Amplatz Wire, Lengths- 150Cm, Tip - Straight / Shapable, 0.035” 592 Amplatz Wire, Super Stiff, Lengths- 260, 300Cm, Tip - Straight / Shapable, 0.035” 593 Amplatz Wire, Super Stiff, Lengths- 150Cm, Tip - Straight / Shapable, 0.035” 594 Amplatz Wire, Extra Stiff, Lengths- 260, 300Cm, Tip - Straight / Shapable, 0.035” 595 Amplatz Wire, Extra Stiff, Lengths- 150Cmcm, Tip - Straight / Shapable, 0.035” 596 Amplatz Wire, Lengths- 260, 300Cm, Tip - Straight / Shapable, 0.035” 597 2.3 - 3F Size Coronary Microsnare, Length 150 , 175Cm 598 3.2F Size Coronary Snare, Length-150 Cm 599 4, 6F Size Coronary Snare, Length- 102 Cm 600 6-7 F Size Coronary Snare, Length- 100 Cm 601 Catheter Outside Diameter:4F-6F, Catheter Length:48Cm-102Cm 602 Peripheral Snare, Size: 9-11 F / Length: 63, 58Cm. 603 Balkin Sheath, 5.5F-7F, Length -40, 45Cm 604 Mullins Sheath ( Pediatric ) , 6F-9F 605 Mullins Sheath , 10F- 14F 606 Pda Device ( Fda / Ce Approved ) , Duct Occluder Type 1 – All Sizes 607 Pda Device ( Fda / Ce Approved ) , Duct Occluder Type 2 - All Sizes 608 Pda Device ( Fda / Ce Approved ) , Duct Occluder Type 1 – All Sizesduct Occluder Type 2 - All Sizes 609 Pda Coils ( Fda / Ce Approved ) , All Sizes 610 Pda Occluder D2 / D3 Diameters Ranging From 3.5 / 5 To 14 / 18Mmwith Delivery Cable Included 611 Pda Coils ( Dcgi Only ) , All Sizes 612 Coils For Pda Closure, Detachable Coil Made From Inconel Material , With Synthetic Fibres, Mri Compatible. Compatible Delivery System -Tfe Coated Stainless Steel Delivery Wire With A Straightening Mandril And Pin Vise Handle For Detachment. Pda Closure Access Procedure Pack With Introducer, Catheter And Delivery System 613 Embolization Coils For Use In Peripheral Vasculature , Made Of Inconel Material, Mri Compatible, Delivered Through Catheter Internal Diameters 0.035 And 0.038 Inches, All Diameters ( 2-45Mm ) And Lengths ( 2-16Cm ) . Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety 614 Catheters With Easy Trackability For Coil Delivery - Hydrophilic Coated , Single And Double Braided With Stainless Steel, 4Fr And 5Fr , Lengths 65 Cm To 150Cm, All Tip Shapes. . Internationally Accepted Terumo Quality And Equal Performance Needed For Patient Safety 615 Vsd Device ( Muscular ) Fda / Ce Approved ) , All Sizes 616 Vsd Device ( Muscular ) ( Dcgi Only ) , All Sizes 617 Vsd Device ( Membranous Symmetric ) Fda / Ce Approved ) , All Sizes 618 Vsd Device ( Membranous Symmetric ) ( Dcgi Only ) All Sizes 619 Vsd Device ( Membranous Asymmetric ) ( Fda / Ce Approved ) , All Sizes 620 Vsd Device ( Membranous Asymmetric ) ( Dcgi Only ) , All Sizes 621 Asd Device ( Fda / Ce Approved ) , All Sizes 622 Asd Device ( Dcgi Only ) , All Sizes 623 Asd Device / Detachable Cable, Amplatzer Multi-Fenestrated Septal Occluder-Cribriform 624 Asd Paediatric Sizing Balloon : Extra High Inner Lumen Strength, Radiopaque Inner Tubing, Radiopaque Marker Bands At 10 Mm Distance On The Balloon , Lengths 1Cm To 6 Cm; Diameter 10 Mm To 40Mm. . Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety 625 Asd Device With Delivery Cable Included - Waist Diameters Ranging From 4Mm To 40 Mm 626 Low Profile Vascular Occlusion Device :Low Profile Vascular Occlusion Type Of Device Made Of Nitinol Multilayer With Six Occlusive Planes , Diameter Ranging From 3-22Mm , Length 6-18 Mm . Compatible Delivery System For Same. 627 Extremely Low Profile Vascular Occlusion Type Of Device Made Of Nitinol, With Multilayered Double Lobe Design, Deliverable Through Diagnostic Catheter , Diameter 4-8Mm And Length 10-13.5Mm. Compatible Delivery System. 628 Very Low Profile Pda Occlusion Device , Deliverable From Arterial / Venous Side With Three Articulated Mesh Lobes Providing Six Occlusive Planes, With Fabric Free Technology, Device Diameter 3-6Mm, All Lengths And Disc Sizes. Compatible Delivery System And Guide Wire 629 Balloon Atrial Septostomy ( Bas ) Otw Balloon , Balloon Dia: 9.5Mm – 13.5 Mm / Length: 0.95 Mm – 1.35 Mm ) 4F & 5F 630 Balloon Atrial Septostomy Direct ( Bas ) Balloon, Balloon Dia: 9.5Mm – 13.5 Mm / Length: 0.95 Mm – 1.35 Mm ) 4F & 5F 631 Asd Sizing Balloon, Balloon Diameter – 10Mm- 40M / Length-10Mm- 60Mm 632 Device Loader For Asd, Vsd, Pda, 633 Balloon Aortic Valvuloplasty ( Bav ) Balloon, Balloon Dia: 4Mm – 26 Mm / Length: 10 Mm -40 Mm 634 Balloon Pulmonary Valvuloplasty ( Bpv ) Balloon, Balloon Dia: 4Mm – 26 Mm / Length: 10 Mm - 100 Mm 635 Bav Kit, 636 Bpv Kit 637 Nih Catheter, 4F – 7F 638 Goodale – Lubin Catheter, 4F – 7F 639 Pig Tail Catheter, 4F – 6F 640 Berman Angiographic Catheter, 5F – 7F 641 Swan-Ganz Wedge Pressure Catheter, 5F – 7F 642 Asd Closure Work-Horse Wirewith Fixed Core, Diameter -0.025, 0.035, 0.038”, Lengths - 80, 145, 180, 260Cm, Tip - J-Curved & Straight 643 Asd Closure Work-Horse Wire With Movable Core, Diameter -0.035”, Lengths – 145Cm, Tip - J-Curved 644 Asd Closure Work-Horse Wire, Diameter -0.035”, Lengths - 80, 145, 180Cm, Tip - J-Curved & Straight 645 Pta Catheter With Embolic Capture Feature – 0.014 Compatible, Sheath Compatibility- 5F, Balloon Diameter – 3Mm, Balloon Length- 100Mm 646 Pta Catheter With Embolic Capture Feature – 0.014 Compatible, Sheath Compatibility- 5, 6F, Balloon Diameter – 4, 5, 6Mm, Balloon Length- 60, 100Mm 647 Ptv Dilation Catheter For Bpv 0.018 Compatible, Sheath- 3.5F, Balloon Lengths – 2- 4Cm, Balloon Diameters- 4-12Mm 648 Asd - Sizing Balloon, Sheath Compatibility- 6F-9F, Balloon Lengths- 1Cm-6Cm, Balloon Diameters- 10, 12, 15, 20, 25, 30, 35, 40Mm 649 Balloon Dilation Catheter For Bpv With Guidewire Compatibility- 0.018, 0.021, 0.025, 0.035, Balloon Diameters- 4, 5, 6, 7, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 23, 25Mm, Balloon Lengths- 1, 1.5, 2, 3, 4, 5, 6, 8, 10Cm 650 Balloon Dilation Catheter For Bpv, Guidewire -0.021, 0.025, 0.035, 4Mm-30Mm Balloon Diameters 651 Pediatric Ptv Balloon Dilation Catheter, 2.5F-3.5F, Balloon Diameters- 4, 5, 6, 7, 8, 9, 10Mm, Balloon Lengths - 1, 2, 4Cm 652 High Pressure Balloons For Valvuloplasty / Rvot Interventions / Other Large Vessel Interventions : High Pressure Balloon Suitable For Resistant Stenosis , Platinum Marker Bands Facilitate Reliable Positioning Of The Balloon , Available In Diameters Ranging From 2.0 To 40.0 Mm . Internationally Accepted Numed Quality And Equal Performance Needed For Patient Safety 653 Balloon In Balloon Catheter : Balloon In Balloon Type Of Catheter For Stable Positioning Of Stents In Vasculature , An Inner Balloon 1 / 2 Of The Balloon Diameter Of The Outer Balloon, Inner Balloon That Is 1.0 Cm Shorter Than The Outer Balloon, Inner Balloon With A Rated Burst Pressure Of 4.5 To 5.0 Atmospheres, Four Image Bands That Match The Functional Length Of Each Balloon, Length Of 110 Cm, For Use With A 0.035 Wire. . Internationally Accepted Numed Quality And Equal Performance Needed For Patient Safety 654 Balloon Aortic And Pulmonic Valvuloplasty Catheter, 2.5F-3.5F, Balloon Diameters- 4, 5, 6, 7, 8, 9, 10Mm, Balloon Lengths - 1, 2, 4Cm 655 Bmv Kit, 656 Septal Puncture Needle For Bmv, 657 Ptmc Balloon, ( Balloon Dia: 19 Mm – 30 Mm ) 658 Ptmc Balloon, Balloon Dilatation Range- 24–30Mm, Catheter Length – 70Cm 659 Sapien Xt Trans Catheter Heart Valve With Ascendra Delivery System, Transapical Delivery System ( Tavi ) -24-26 F 660 Sapien Xt Trans Catheter Heart Valve With Ascendra Delivery System, Transfemoral Access ( Tavi ) -16, 18, 20 F 661 Sapien Xt Trans Catheter Heart Valve With Ascendra Delivery System, Transfemoral Access ( Tavi ) -14, 16F 662 Corevalve Transcather- Aortic Valve Replacement System, 18 F Self Expanding ( Tavi ) 663 Melody Transcather Pulmonary Valve , 22 F Balloon Expandable ( Tavi ) 664 Transcatheter Aortic Valve Replacement System: Navigator Balloondual Stopper Systemexpandablevalve Materialbovine Pericardium Tri-Leaflet On A Nickel-Cobalt Alloy Framevalve , Hybrid Honeycomb Cell Designdelivery System. 0.035 Guidewire Compatible And Catheter Length Of 120 Cm, Diameters: 20 Mm, 21.5 Mm, 23 Mm, 24.5 Mm, 26 Mm, 27.5 Mm, 29 Mm 665 Tavi Device Set 666 Myval Transcatheter Aortic Valve Replacement System With Kit- Tavi 667 Myval Tavi Heart Valve 668 Renal Balloon Various Sizes 669 Iabp Pressure Cable And Ecg Cable Set:Iabp Pressure Cable And Ecg Cable Set Suitable For Datascope Machine 670 Iabp Balloon, Datascope Compatible 671 Helium Cylinder For Iabp, Datascope Compatible 672 Ffr Wire, Volcano Compatible 673 Ffr Connecting Cable, Volcano Compatible 674 Ffr Wire - 0.014With Medium Weight Support , Hydrophilic Coating , Flat Corewire Design , High -Fidelity Sensor Technology , Radio Opaque Tip, Frequency Range -2.4000-2.4835Ghz ( Ism Band ) , Pressure Range -30To +300Mmhg 675 Abbott Vascular Pressure Wire X Guide Wire Cabled And Wireless With Receiver 175 And 300Cms 676 25Cm -30Cmlong, Size Femoral Sheath Size Ranging From6f, With Guide Wire 677 Balkin Sheath, 5F-10F, Length -40, 45Cm 678 Amplatz Wire, Super Stiff, Lengths- 260, 300Cm, Tip - Straight / Shapable, 0.035” 679 Amplatz Wire, Super Stiff, Lengths- 150Cm, Tip - Straight / Shapable, 0.035” 680 Amplatz Wire, Extra Stiff, Lengths- 260, 300Cm, Tip - Straight / Shapable, 0.035” 681 Amplatz Wire, Extra Stiff, Lengths- 150Cmcm, Tip - Straight / Shapable, 0.035” 682 Amplatz Wire, Lengths- 260, 300Cm, Tip - Straight / Shapable, 0.035” 683 Amplatz Wire, Lengths- 150Cm, Tip - Straight / Shapable, 0.035” 684 Micropuncture Introducer Set Silhouette Transitionless With Stainless Steel Wire Guide Wire 685 Amplatz Anchor Catheter ( With Locking Malecot ) 8, 10, 12 Fr. 686 Amplatz Ultrastiff Guidewire 0.035 X 180 Cm 687 Amplatz Ultrastiff Guidewire 0.035 X 260 Cm 688 Amplatz Ultrastiff Guidewire 0.035 X 80 Cm 689 Angiographic Catheter 4F All Shapes And Lengths 690 Angiographic Catheter 5F All Shapes And Lengths 691 Angiographic Catheter 6F All Shapes And Lengths 692 Angioplasty Balloon Catheter Cutting Type Over 0.014 All Diameters And Lengths 693 Angioplasty Balloon Catheter Drug Coated Over 0.035 All Sizes And Lengths 694 Angioplasty Balloon Catheter Drug Cutting Type Over 0.018 All Diameter All Lengths 695 Angioplasty Balloon Catheter Peripheral Over 0.014 All Sizes And Lengths 696 Angioplasty Balloon Catheter Peripheral Over 0.035 All Sizes And Lengths 697 Angioplasty Balloon Over 0.018 Guidewire 698 Angioplasty Balloon Rapid Exchange 0.014 All Sizes And Lengths 699 Arterial Puncture Needle 18 G 700 Arterial Sheath All Sizes And 10 To 30 Cm Lengths 701 Arterial Sheath Long Sheath All Sizes And 40, 60, 70, 80, 90 Cm 702 Arterial Sheath Long Sheath Braided Kink Resistant All Sizes And 40, 60, 70, 80, 90 Cm Lengths 703 Balloon Catheter Non Compliant Peripheral Over 0.035 Wire, All Sizes 704 Biliary Access Set Like ( Acoustic / Ntff Set ) 705 Biopsy Needle Coaxial - 14 G, 16 G, 18 G, 20 G Diameters, All Length 706 Biopsy Needle Core Biopsy 16G, 18G And 20 G All Length 707 Chiba Needle All Sizes And Lengths 708 Coil Pusher All Sizes 709 Cope Gastrostomy / Jejunostomy Suture Anchors 710 Cope Mandril Guidewire 711 Covered Stent Graft Balloon Mounted. All Diameter And Length 712 Cross Over Sheath All Sizes 713 Cto Wire0.014; All Length 714 Dilator Coons Type 8F To 30 F Or More 715 Dilator Fascial Type 8F To 30 F Or More 716 Embolization Coil Push Coil Platinum 0.018 All Sizes 717 Embolization Coil Push Coil Platinum 0.035 All Sizes 718 Embolization Coil Push Coil Steel 0.035 All Sizes 719 Embolization Particles Embosphere Likeparticles 720 Embolization Particles-Pva Particles 721 External Biliary Drainage Catheter 10 F, 20 Cm With And Without Are Straightener 722 Femoral Compression Band 723 Femoral Long Sheath; 5F-11F Diameter, Up To 90 Cm Length 724 Guidewire 0.014 Shapeable, , Scitamineum Stainless Steel, Icf Hydrophilic For Ham, Sfa, Btk 725 Guidewire 0.018 Shapeable, Scitamineum Stainless Steel, Icf Hydrophilic For Ham, Sfa, Btk 726 Guidewire 0.035 Amplatz Extra Stiff 180 Cms, All Sizes 727 Guidewire 0.035 Amplatz Extra Stiff 260 Cms All Sizes 728 Guidewire 0.035 Amplatz Stiff 260 Cms, 190 Cms All Sizes 729 Guidewire 0.035 Amplatz Ultra Stiff 260 Cms, 145 Cms, 180Cms, All Sizes 730 Ivc Filter 731 Ivc Filter Femoral Route All Sizes 732 Ivc Filter Jugular Route All Sizes 733 Ivc Filter Retrieval Set All Sizes All Routes 734 Long Sheath All Sizes, Shapes & Length 735 Microcatheter 2.4 -3 F, 130 - 150 Cm 736 Microcatheter 2.4 -3 F, 130 Cm With Guide / Glide Wire 0.021 737 Micro Catheter , Proximal Outer Diameter 2.6Fr Tip Outer Diameter 1.4 Fr Distal Shaft -1.9 Fr Length 135Cm 738 Micro Catheter , Proximal Outer Diameter 2.6Fr Tip Outer Diameter 1.4 Fr Distal Shaft -1.9 Fr Length 150Cm 739 2.1F Proximal Size Specialty Micro Catheter Distal Size: 1.8F / 135 Cm Length. 740 2.8 F Proximal Size Microcatheter For Retrograde Approach Distal Size: 1.26 F / 150 Cm Length 741 2.8 F Proximal Size Microcatheter For Retrograde Approach Distal Size: 1.26 F / 135 Cm Length 742 Micropuncture Set All Sizes 743 Mullins Sheath All Sizes 744 Multi Side Hole Catheter All Sizes For Dvt Thrombolysis 745 Percutaneous Entry Set ( Neff Set ) 746 Peripheral Stent Graft Self Expandable All Diameter And Length 747 Peripheral / Biliary Stent: Self Expandable All Diameter And Length 748 Pigtail Catheter With Locking Loop With Non Metallic And Metallic Straightener 6F To 14 F 749 Pta Balloon Catheter Semi -Compliant; , 0.35Compatible; All Diameter And Length 750 Pta Diagnostic Wire ; Hydrophilic Nitinol Guidewire 0.035 All 751 Pva Particles All Sizes 752 Ring Biliary Internal- External Biliary Drainage Catheter 10- 14 F, 40 Cm 753 Rotational Thrombectomy System For Dvt All Sizes 754 Self-Expanding Carotid Stent 0.014 Compatible 755 Self-Expanding Stent For Peripheral Use ; All Diameter And Length 756 Stent Peripheral Balloon Mounted All Sizes 757 Stent Peripheral Self Expanding All Sizes 758 Stent Renal Balloon Mounted All Sizes 759 Syringe 1 Ml Disposable Luer Lock 760 Teflon Coated Guidewire 0.035 X 150 Cm 761 Temporary Ivc Filter -Deployment Through Femoral , Jugular And Antecubital Vein 762 Tips Set All Sizes 763 Transjugular Liver Access And Biopsy Needle Set 764 Transjugular Liver Biopsy Needle 18G, 60 Cm Or Similar 765 Cto Wires ( Boston Type ) All Shape And Size 766 Diagnostic Angiography Guidewire 0.032 Straight And J Tip, 150Cm 767 Femoral Sheath 035, Wire Different Length 768 Femoral Sheath 20F, 22F, 24F 769 Inflation Device 30Atm 770 Ivc Filter Retrievable 771 Lunderquist Wire 260Cm 772 Hydrophilic Wire Guide Straight Standard Shaft With Torque 0.035150Cm 773 Hydrophilic Wire Guide Straight Standard Shaft With Torque 0.035260Cm 774 Slender Sheath Radial Sheath 10Cm Long , Guide Wire 0.025 ( Plastic ) With Unique Thin Wall Structureto Perform Procedure Without Upsizing To A Large Sheath With International Terumo Quality 775 Doc Extension:Extension Wire Rg3 Tip Load 3G, Slip Coat 170Cm, Length 330Cm 776 Guide Catheter :3Rd Curve, Henka Braid, 0.071 Id 777 Angiography Guide Wire 0.035, Hydrophilic Coating With Act One 778 Hydrophilic Wire 0.014 180 Cm Long Moderate Support Marker Wire For Ptca-Straight / J Tip -One-Piecestainless Steel Core Wire Design.Ptfe Spray Coat 779 Hydrophilic Wire 0.014 195 Cm Long Moderate Support Marker Wire For Ptca-Straight / St, J Tip -One-Piecestainless Steel Core Wire Design.Four Markers Span 30Mm In 10Mm Increments 780 Hydrophilic Wire 0.014 180 / 300Cm Long Moderate Support Marker Wire For Ptca-Straight / J Tip -One-Piecestainless Steel Core Wire Design.Supersoft Or Soft Tip 781 Hydrophilic Wire 0.014 180 / 300Cm Long Moderate Support Marker Wire For Ptca-Straight / St Tip -One-Piecestainless Steel Core Wire Design.Flattened Distal Coils 782 Hydrophilic Wire 0.014 195 / 300Cm Long Moderate Support Marker Wire For Ptca-Straight / J Tip -One-Piecestainless Steel Core Wire Design.Ptfe Spray Coat 783 Pressure Monitoring Lines , Choice Of Length From 6 To 84 Choice Of Clour - Red, Blue, Yellow & Transparent Minimum Priming Volume Id 1.27 Mm X Od 2.79 Mm 784 Inflation Device:Rated Pressure 30 Bar / 430 Psi Ergonomic Handle 785 Hemostasis Y: Push-Pull / Rotating / Click Type / Click Type Includes Ext. Line 25Cms – 4 Way:Large Bore Compatible With Catheters From 4Fr Upto 9Fr And Guide Wires From 0.014” To 0.038” Dia Rated Pressure 480 Psi 786 Invasive Blood Pressure Transducer:Integrated Unit For Clinical Accuracy Dual Mode Of Flushing: Controlled Squeeze & Snap-Tab Completely Transparent For Ease Of Priming And Debubbling Available With Flushing Of 3Cc / Hr, 30Cc / Hr Or Without Flush Easy Zeroing . 787 C-Fuser Pressure Infuser Bag 500Ml / 1000Ml ( Reusable ) ( Option 1 ) 788 Cuff Clear Pressure Infuser Bag 500Ml / 1000Ml ( Reusable ) 789 Pressure Infuser Bag 500Ml / 1000Ml ( Disposable ) 790 Ivus Catheter, Volcano Compatible 20Mhz, 45 Mhz, 60Mhz 791 Ivus Catheter : Intra Vascular Ultrasound Imaging Catheter With Transducer Frequency Of 30, 40 And 60 Mhz, Maximum Diameter Penetration Of 6 Mm And 12 Mm, 5Fr And 6Fr Compatible, 0.014 And 0.018 Inch Guide Wire Compatible , Length 135 Cm With Hydrophilic Coating And Radio Opaque Distal Tip Marker 792 Dragonfly Optis Intravascular Imaging, 2Mm-3.5Mm Imaging Diameter 793 Dragon Fly Optis / Duo Oct Imaging Catheter :Compatible With Ilumein Optis, , Provide Continuous Calibration Throughout Pullback , , Pull Back Lengh -54 ( High Resolution ) 75 ( Survey ) Mm , Imaging Up 180Frames Per Sec , 3 Radio Opaque Markeres At The Distal Tip , Imaging Lens 50Mm Proximal , 2.7F Crossing Profile , Compatible With 0.014&6F Guide Catheter 794 3 D Oct Catheter, 795 Rotablation Set, 796 Rotablation Burr, 797 Rota Wire, 798 Pulmonary Embolectomy Catheter, 799 Dual Lumen Catheter, 800 Embolization Coil For Iliac Artery 801 Detachable Coil System, 802 Coil Detacher / Bioptome Cable, 803 Micro Catheter For Neuro Intervention, 804 Floppy Wire 0.014 For Neuro Interventions 805 Floppy Wire 0.018 For Neuro Interventions 806 Semi Compliant Balloons Of 0.014 For Neuro Interventions 807 Semi Compliant Balloons Of 0.018 For Neuro Interventions 808 Helical Extrasoft Detachable Coils For Neuro Interventions 809 Liquid Embolics For Pre Operative Neuro Embolisation 810 3D Extra Soft Detachable Coils For Neurointerventions 811 3D Super Soft Detachable Coils For Neurointerventions 812 Helical Supersoft Detachable Coils For Neurointerventions 813 Flow Diverters For Neuro Interventions 814 Mechanical Thrombectomy Devices For Neuro Revascularisaton 815 Self Expanding Deployable And Retrievable Device For Aneurysm 816 Intracranial Support Catheters 817 Cable Set For Pacemaker Leads 818 Crt-P 819 Crt-P Bipolar 820 Crt-P Bipolar, 6 Pacing Vectors 821 Crt-P Bipolar, Mri Auto Detect 822 Crt-P Quadripolar 823 Crt-P Quadripolar, 13 Pacing Vectors 824 Crt-Dwith Accessories 825 Crt-Dwith Accessories ( Bipolar ) 826 Crt-Dwith Accessories ( Quadripolar ) 827 Crt-D Pg Only 828 Crt-D Pg Only ( Bipolar ) 829 Crt-D Pg Only ( Quadripolar ) 830 Permanent Pacemaker- Vvi-Tined Lead & Screw In Lead With Pulse Generator Volume10cc, With Life Time Warrenty ( Non Mri Compatible ) 831 Permanent Pacemaker- Vvi-Tined Lead & Screw In Lead With Pulse Generator Volume10cc, With Life Time Warrenty ( Mri Compatible ) 832 Permanent Pacemaker- Vvi-Tined Lead & Screw In Lead With Pulse Generator ( Non Mri Compatible ) 833 Permanent Pacemaker- Vvi-Tined Lead & Screw In Lead With Pulse Generator ( Mri Compatible ) 834 Permanent Pacemaker- Vvi-Tined Lead & Screw In Lead With Pulse Generator And Allows Full Body Mri Scans 835 Permanent Pacemaker- Vvi-Tined Lead & Screw In Lead ( Non Mri Compatible ) 836 Permanent Pacemaker- Vvi-Tined Lead & Screw In Lead ( Mri Compatible ) 837 Pacemaker - Vvir-Tined Lead & Screw In Lead ( Mri Compatible ) 838 Pacemaker - Vvir-Tined Lead & Screw In Lead ( Non Mri Compatible ) 839 Pacemaker Vvir Tined Lead & Screw In Lead Mass 840 Pacemaker ( Vdd ) -Tined Lead & Screw In Lead ( Mri Compatible ) 841 Pacemaker ( Vdd ) -Tined Lead & Screw In Lead ( Non Mri Compatible ) 842 Pacemaker Vdd R-Tined Lead & Screw In Lead ( Mri Compatible ) 843 Pacemaker Vdd R-Tined Lead & Screw In Lead ( Non Mri Compatible ) 844 Permanent Pacemaker - Ddd-Tined Lead & Screw In Leadwith Pulse Generator , And Life Time Warranty 845 Permanent Pacemaker - Ddd-Tined Lead & Screw In Lead, With Multiprogrammability , Mri Compatible Pacemaker 846 Permanent Pacemaker - Ddd-Tined Lead & Screw In Lead , Mri Compatible Pacemaker 847 Permanent Pacemaker - Ddd-Tined Lead & Screw In Lead 848 Pacemaker - Dddr-Tined Lead & Screw In Lead 849 Pacemaker - Dddr-Tined Lead & Screw In Leadmass 850 Mri Compatible Pacemaker-Single Chamber Rate Responsive 851 Mri Compatible Pacemaker-Dddr 852 Mri Compatible Pacemaker Dddr With Rate Drop Response, Af Suppression Algorithm 853 Icd-Single Chamber 3 Tesla , Rf Telemetry & Morph Matchwith Life Time Warranty 854 Icd-Single Chamber 3 Tesla , Rf Telemetry & Morph Match 855 Icd-Single Chamber 856 Icd-Single Chamber ( Mri Compatible ) 857 Icd-Dual Chamber 858 Icd-Dual Chamber ( Mri Compatible ) 859 Permanent Pacemaker- Vvi / Vvir: Tined Lead Or Screw In Lead + Sheath ( 1 ) , Pacemaker With Capturer Management And Muti Programmable, 1.5 / 3 T Full Bodymri Conditional Warranty 8Yrs With All Set 860 Pacemakers, Singlechamber ( Mri ) Vvirlifetime Warranty.1.5 & 3T Mri, No Time Or Zone Restrictions, Auto Mri Mode Change, Rf Telemetry, ( Provide Dynamic Adjustment Of Pacing Output To Ensure Capture ) , Rate Adaptive Pacing ( Dual Sensors Of Accelerometer With Minute Ventilation To Ensure Maximun Physiological Rate Responsiveness ) , With All Set 861 Pacemakers, Single Chamber Vvir ( Non Mri ) Limited Warranty. ( Provide Dynamic Adjustment Of Pacing Output To Ensure Capture ) , Rate Adaptive Pacing ( Dual Sensors Of Accelerometer With Minute Ventilation To Ensure 94% Of Physiological Rate Responsiveness ) , 862 Pacemakers, Single Chamber Vvir ( Non Mri ) Lifetime Warranty. Rf Telemetry, ( Provide Dynamic Adjustment Of Pacing Output To Ensure Capture ) , With All Set Rate Adaptive Pacing ( Dual Sensors Of Accelerometer With Minute Ventilation To Ensure Maximumphysiological Rate Responsiveness ) , 863 Single Chmber Pacemake Vvir Mri Compactable .Limited Warranty ( 8Yrs ) , Maximum Longevity16yrs, Diamensions 48*40Mm*6.5Mm With All Set 864 Single Chmber Pacemake Vvir Mri Compactable .Lifetime Warranty, 16Yrs Longevity., Diamensions 48*40Mm*6.5Mm With All Set 865 Mri Compatible Single Chamber Limited Warranty Vvipacemakerwith All Set Auto Capture, Egm Storage, Hysteresis, Advanced Hysteresisce / Fda / Dcgi 866 Mri Compatible Single Chamber Limited Warranty Vvir Rate Response Pacemaker With All Set Rate Response Accelerometer Sensor, Auto Capture, Egm Storage. Hysteresis, Advanced Hysteresis Ce / Fda / Dcgi 867 Mri Compatible Single Chamber Lifetime Warranty Rate Response Vvir Pacemaker With All Set Auto Capture, 14Min Egm Storage, Auto Sense, Auto Capture, Rate Response Pacing 868 Permanent Pacemaker – Ddd / Dddr: Tined Lead & Screw In Lead +Sheath ( 2 ) , Multi-Programmable Rate Responsive Dddr Pacemaker With Rate Drop Response, Ra And Rv Capturer Management With Remote Monitoring Capabilities For Cardio Neurogenic Syncopepatients.1.5 / 3T Full Bodymri Conditional Mri , Rvp+ Alog , Warranty 8Yrs Or More With All Set 869 Permanent Pacemaker – Ddd / Dddr: Tined Lead & Screw In Lead +Sheath ( 2 ) , Multi-Programmable Rate Responsive Dddr Pacemaker With Rate Drop Response, Ra And Rv Capturer Management With Remote Monitoring Capabilities For Cardio Neurogenic Patients.1.5 / 3T Full Bodymri Compatible Pacemaker, Mvp Alog , With Life Time Warranty With All Set 870 Permanent Pacemaker: Dddr Limited Warranty 8Yrs, Multi-Programmable Rate Responsive Dddr Pacemaker With Rate Drop Response, Ra And Rv Capturer Management With Remote Monitoring Capabilities For Cardio Neurogenic Syncopepatients1.5 / 3T Full Body Mri, Reactive Atp, Bluetooth Sync Technology With All Set 871 Permanent Pacemaker – Ddd / Dddr: Physiological Pacing Leads & Accessories , Multi-Programmable Rate Responsive Dddr Pacemaker With Rate Drop Response, Ra And Rv Capturer Management With Remote Monitoring Capabilities For Cardio Neurogenicsyncope Patients.1.5 / 3Tfull Body Mri Compatible Pacemaker: With Life Time Warrantywith All Set 872 Permanent Pacemaker – Ddd With Remote Monitering Device : Tined Lead & Screw In Lead , Multi-Programmable Rate Responsive Dddr Pacemaker With Rate Drop Response, Ra And Rv Capturer Management With Remote Monitoring Capabilities For Cardio Neurogenic Patients.1.5 / 3T Full Bodymri With Limited Warranty With All Set 873 Permanent Pacemaker – Ddd / Dddr: Physiological Pacing Leads & Accessories , Multi-Programmable Rate Responsive Dddr Pacemaker With Rate Drop Response, Ra And Rv Capturer Management With Remote Monitoring Capabilities For Cardio Neurogenic Syncopepatients.1.5 / 3T Full Bodymri Compatible Pacemaker: With Limitedwarranty With All Set 874 Pacemakers, Dual Chamber ( Non Mri ) Lifetime Warranty.Dual Sensors, Rf Telemetry, Pacesafe Ra Rv ( Provide Dynamic Adjustment Of Pacing Output To Ensure Capture ) , Rate Adaptive Pacing ( Dual Sensors Of Accelerometer With Minute Ventilation To Ensure Maximunphysiological Rate Responsiveness ) , Av Search+ ( Minimise Unnecessary Rv Pacing And Reduce The Risk Of Hf Development ) , Extended Life ( El ) Labelled Battery With Maximumcapacity With All Set 875 Pacemakers, Dual Chamber ( Mri ) Dddr Lifetime Warranty Image Ready -- Mr Conditional Pacing System At 3T And 1.5T, Full Body With No Timeimitations, With Automatic Mritimeout Feature To Optimize Workflow In Mr Environment Longevity - Maximumlongevity. 14 Years With 50% Pacing And 13Years With 100% Pacingrate Adaptive Pacing - Blended Sensors Of Accelerometer With Minute Ventilation With All Set 876 Dddr Mri Limited Warranty:1.5 & 3T Mri, No Time Or Zone Restrictions, Auto Mri Mode Change, Rf Telemetry, Pacesafe Ra Rv ( Provide Dynamic Adjustment Of Pacing Output To Ensure Capture ) , Rate Adaptive Pacing ( Dual Sensors Of Accelerometer With Minute Ventilation To Ensure Maximumphysiological Rate Responsiveness ) , Algorithm ( Minimise Unnecessary Rv Pacing And Reduce The Risk Of Hf Development ) , Extended Life ( El ) Labelled Battery With Maximumcapacity With All Set 877 Dual Chamber Pacemakerdddrmri Compatible.Compact Size , Warranty ( 8Yrs ) And Maximumlongevity. 878 Dual Chamber Pacemakerddd Mri Compatible.Minimun Of 8Yr Warranty, Maximumlongevity, Compact Size 879 Dual Chmber Pacemakerdddrmri Compatible.Compactsize.Lifetime Warranty And Maximum Longevity.With All Set 880 Mri Compatible Dual Chamber Limited Warranty Ddd Pacemaker Auto Capture, Egm Storage, Af Suppression, Vip, Senseability, At / Af Alerts Ce / Fda / Dcgi With All Set 881 Mri Compatible Dual Chamber Limited Warranty Rate Response Dddr Pacemaker Auto Capture, >10Min Egm Storage, Af Suppression, Vip, Senseability, At / Af Alerts, ( A Cap Confirm ) , Rate Response Pacing With All Set 882 Mri Compatible Dual Chamber Lifetime Warranty Rate Response Dddr Pacemaker Auto Capture, A Cap Confirm, Auto Sense, 14Min Egm Storage, At / Af Alerts, Vip, Senseability, Rate Response Pacing, Af Suppressionwith All Setce / Fda / Dcgi 883 3T Mri Compatible Dual Chamber Lifetime Warranty Rate Response Dddr Pacemaker With All Set Congestion Monitoring, Rf Telemetry, , Auto Capture, Senseability, At / Af Alerts, Vip, Af Suppression, Rate Response Pacing Ce / Fda / Dcgi 884 Icd: Single Chamber Non Mri, Single Chamber Icd In Df1 / Df4 Connection With Shock Reduction Technology, Atp During And Before Charging, Hf Diagnostics, Lead Integrity Alert, T Wave Oversensing With Three Zone Tachy Arrythmia Programmability.5+3 Warranty 885 Icd :Single Chamber 1.5 / 3 T-Full Body Mri, Smart Shock Technology, Single Chamber Icd In Df1 / Df4 Connection With Shock Reduction Technology, Atp During And Before Charging, Hf Diagnostics, Lead Integrity Alert., 5+3 Warranty 886 Icd :Single Chamber 1.5 / 3 T1.5 / 3 T-Full Body Mri, 8+2 Warranty-Withaf Detection Algorithm.Single Chamber Icd In Df1 / Df4 Connection With Shock Reduction Technology, Atp During And Before Charging, Hf Diagnostics And Alert, Af Diagnostic Physiological Shape . Algorithm For Optimum Shock. 887 Single Chamber Icd Mri Autodetect Rf Telemetry Morph Match Ultrathin , Atleast 15Yrs Longivity, 10Yrs Warranty 888 Single Chamber Icd With Atrial Dipole ( Vdd Icd ) Mri, Maximum Longivity, 10Yrs Warranty 889 Icd Single Chambersingle Icd Extended Life ( El ) Labeled Icd With Li / Mno2 Battery .10-Year Warranty .Mri Compatible.Rate Adaptive Pacing With Blended Sensors Of Accelerometer With Minute Ventilation.Battery Capacity Of Minimum 2 Ah. 890 Icd Single Chamberextended Life ( El ) Labeled Icd With Li / Mno2 Battery .8-Year Warranty .Mri Compatible.Rate Adaptive Pacing With Blended Sensors Of Accelerometer With Minute Ventilation. 891 Single Chamber Mri Compatibleicd. Rf Telemetry, > / = 40 J Delivered Energy, Svt Discriminators, Senseability, Low Frequency Attenuation Filter, Secure Sense Lead Noise Discriminator, Patient Notifiers, >30Min Egm Storage, St Monitoring.Ce / Fda / Dcgi 892 Single Chamber Mri Compatible Icd, Rf Telemetry 36J Delivered Energy, Senseability, Low Frequency Attenuation Filter, Secure Sense Lead Noise Discriminator, Patient Notifiers, Upto 45Min Egm Storage, St Monitoring Ce / Fda / Dcgi 893 3T Mri Compatible Single Chamber Icd Bluetooth Enabled Smartphone Connectivity, Deft Response, ( Vf Therapy Assurance ) , Far Field Md Morphology Discriminator, Senseability, Shocking Vector Change , Dual Patient Notifiers.Ce / Fda / Dcgi 894 3T Mri Compatible Single Chamber Icd Device Bluetooth Enabled Smartphone Connectivity, Deft Response, ( Vf Therapy Assurance ) , 40J Delivered Energy , Far Field Md Morphology Discriminator, Shocking Vector Change, Senseability, , Dual Patient Notifiers, Congestion Monitoring Ce / Fda / Dcgi 895 Icd: Dual Chamber Nonmri, Dual Chamber Icd In Df1 / Df4 Connection With Shock Reduction Technology, Atp During And Before Charging, Hf Diagnostics, Lead Integrity Alert, T Wave Oversensing With Three Zone Tachy Arrythmia Programmability, With Algorithm To Reduce Unnecessary Rv Apical Pacing.Smart Shock Technology. Warranty 4+3 896 Icd: Dual Chamber 1.5 / 3 T-Full Body Mri, Smart Shock Technology, Dual Chamber Icd In Df1 / Df4 Connection With Shock Reduction Technology, Atp During And Before Charging, Hf Diagnostics, Lead Integrity Alert. 897 Icd: Dual Chamber Nonmri, Dual Chamber Icd In Df1 / Df4 Connection With Shock Reduction Technology, Atp During And Before Charging, Hf Diagnostics, Lead Integrity Alert, T Wave Oversensing With Three Zone Tachy Arrythmia Programmability, With Algorithm To Reduce Unnecessary Rv Apical Pacing.Smart Algorithm For Monitoringshock 898 Dualchamber Icd With Mri / Autodetectsmart Detection Morph Match Rf Telemetry , 5Yrs Warranty 899 Icd Dualchamberdualextended Life ( El ) Labeled Icd With Li / Mno2 Battery .10-Year Warranty .Mri Compatible.Rate Adaptive Pacing With Blended Sensors Of Accelerometer With Minute Ventilation.Maximum Battery Capacity Of 2Ah 900 Icd Dualchamberextended Life ( El ) Labeled Icd With Li / Mno2 Battery .8-Year Warranty .Mri Compatible.Rate Adaptive Pacing With Blended Sensors Of Accelerometer With Minute Ventilation.Atp In All Zones.Morphology Match.Compact Size, Maximum Battery Capacity Of 2Ah 901 Dual Chamber Mri Compatibleicd. Rf Telemetry, Af Suppression, Chamber Onset, 40J Delivered Energy, Af, Senseability, Low Frequency Attenuation Filter, Secure Sense Lead Noise Discriminator, Patient Notifiers, >30Min Egm Storage Ce / Fda / Dcgi 902 Dual Chamber Mri Compatibleicd. Rf Telemetry, Af Suppression, Chamber Onset, 36J Delivered Energy, Af, Senseability, Low Frequency Attenuation Filter, Secure Sense Lead Noise Discriminator, Patient Notifiers, >30Min Egm Storage, St Monitoring Ce / Fda / Dcgi 903 3T Mri Compatible Dual Chamber Icd Bluetooth Enabled Smartphone Connectivity ( Vf Therapy Assurance ) , Shock Guard, Far Field Md Morphology Discriminator, Senseability, Shocking Vector Change, Dual Patient Notifiers, Af Suppression, At / Af Alerts, Chamber Onset Ce / Fda / Dcgi 904 3T Mri Compatible Dual Chamber Icd Bluetooth Enabled Smartphone Connectivity, Deft Response, Vfta ( Vf Therapy Assurance ) , Shock Guard, 40J Delivered Energy, Far Field Md Morphology Discriminator, Senseability, Dual Patient Notifiers, Shocking Vector Changeaf Suppression, At / Af Alerts, Chamber Onset Ce / Fda / Dcgi 905 Crt-P : Bipolar 1.5 / 3T Full Body Mri , Physiocurve Design, Bluetooth Wireless Telemetry, Optimization, With Mvp Mode, Multi-Programmable Crt-P With Heart Failure Diagnostics. Warranty 5Yrs 906 Crt-P : Bipolar Non- Mri , Crt-P With Heart Failure Diagnostics., 5 Yrs Warranty 907 Crt-P : Quard 1.5 / 3T Full Body Mri , Bluetooth Wireless Telemetry, Optimization, With Mvp Mode Lv Automated Test, Multi-Programmable, Quadripolar Lead, Auto Capture Management For Ra, Rv & Lv, Automatic Atrial Anti Tachy Therapies, Heart Failure Diagnostics With Trans Thoracic Fluid Impedance Measurement And Rate Drop Response, Multi Site Pacing Crt-P.Warranty 5Yrs 908 Crtp Bipolar Mri 3Tesla Rf Telemetry Cls Mri Autodetect 6 Pacing Vectors , With Maximumlongivity, 5Yrs Warranty 909 Crtp Quadripolarmri 3Tesla Rf Telemetry Cls Mri Autodetect 12 Pacing Vectors , With Maximum Longivity, 5Yrs Warranty 910 Crtp:Quadripolar Crtp.Mri Compatible.17 Pacing Vectors.Apnea Scan.Rate Adaptive Pacing - Sensors Of Accelerometer With Minute Ventilation 911 Crtp :Bipolar Crtp.Apnea Scan.Rate Adaptive Pacing - Sensors Of Accelerometer With Minute Ventilation 912 Mri Compatible Qudripolar Crt-P Device 14 Pacing Vectors, , At / Af Alerts, Af Suppression, Maximumegm Storage Ce / Fda / Dcgi 913 Mri Compatible Qudripolar Multi Point Pacing Crt-P Device. Multi Point Pacing, 14 Pacing Vectors, ( Syncav Technology, Auto Vectselect, Corvue Congestion Monitoring ) , At / Af Alerts, Af Suppression, 14Min Egm Storage Ce / Fda / Dcgi 914 Rf Enabled Non Mri Bipolar Crt-P Device Auto Capture, Auto Sense At / Af Alerts, Af Suppression, 14Min Egm Storage Ce / Fda / Dcgi 915 Crt-D : Quard 1.5 / 3T Full Body Mri, Physiocurve Design, Cardiosync Optimization , Vectorexpress Lv Automated Test , Smartshock Technology Fluid Status Monitoring , Mvp Mode With Complete Capture Management Diagnostic , Combo Device ( Crt-D ) Of Single Df4 Connection Of Rv / Svc Lead With Quadripolar Lv Lead With Auto Capture Management In Ra, Rv, Lv, Heart Failure Diagnostics And Trans Thoracic Fluid Impedance Measurement, Multi Site Pacing With Shock Reduction Technology, Svt Discrimination Algo., Template Matching And T-Wave Oversensing. 916 Crt-D : Bipolar , Non- Mri, Ombo Device ( Crt-D ) With Crt For Optimized Av And Vv Delay, And Shock Reduction Technology. 917 Crtd Bipolar Mri 3Tesla Rf Telemetry Cls Mri Autodetect 6 Pacing Vectors , 5Yrs Warranty 918 Crtd Bipolar Mri 3Tesla Rf Telemetry Cls Mri Autodetect , Ultrathin 6 Pacing Vectors , >5Yrs Warranty, Maximum Longivity 919 Crtdquadripolarmri 3Tesla Rf Telemetry Cls Mri Autodetect 12 Pacing Vectors , 5Yrs Warranty 920 Crtdquadripolarmri 3Tesla Rf Telemetry Cls Mri Autodetect, Smart Detection , Ultrathin , 20 Pacing Vectors , 5Yrs Warranty, , Maximumlongivity 921 Crtdquadripolarmri 3Tesla Rf Telemetry Cls Mri Autodetect, Smart Detection , Ultrathin , 20 Pacing Vectors , Multipole Pacing, Auto Lv Vector Opt. , 6Yrs Warranty, , 9Yrs Longivity, 8Yrs Mpp 922 Crtds ( Quadripolar ) Extended Life ( El ) Labeled Icd With Li / Mno2 Battery With Industry Best Capacity Of 2Ah.6Year Warranty .17 Vectors. Mri Compatible.Rate Adaptive Pacing With Blended Sensors Of Accelerometer With Minute Ventilation 923 Crtds ( Quadripolar ) Extended Life ( El ) Labeled Icd With Li / Mno2 Battery .6Year Warranty .17 Vectors. Mri Compatible.Rate Adaptive Pacing With Blended Sensors Of Accelerometer With Minute Ventilation. 924 Crtds ( Bipolar ) Extended Life ( El ) Labeled Icd With Li / Mno2 Battery .6Year Warranty .Rate Adaptive Pacing With Blended Sensors Of Accelerometer With Minute Ventilation.Maximum Battererycapacityatleast 2Ah 925 Mri Compatible Multi Point Pacing Crt-D Device. 10 Pacing Vectors, Auto Vectselect, Parylene Coating, Dynamic Tx Over Current Detection, Shock Guard Technology, Far Field Md Morphology Discriminator, 40J Delivered Energy, Low Frequency Attenuation Filter, Senseability, Deft Response, Patient Notifiers, Congestion Monitoring. Ce / Fda / Dcgi 926 3T Mri Compatible Crt-D Device. Bluetooth Enabled Smartphone Connectivity, Vfta ( Vf Therapy Assurance ) , Shock Guard, Far Field Md Morphology Discriminator, Senseability, Over Current Detection, Dual Patient Notifiers, Af Suppression, At / Af Alerts, Chamber Onset Ce / Fda / Dcgi 927 3T Mri Compatible Crt-D Device. Advanced Technology, Bluetooth Enabled Smartphone Connectivity, Vfta ( Vf Therapy Assurance ) , Shock Guard, 40J Delivered Energy, 14 Pacing Vectors., Far Field Md Morphology Discriminator, Senseability, Over Current Detection, Dual Patient Notifiers, Af Suppression, At / Af Alerts, Chamber Onset, Congestion Monitoring Ce / Fda / Dcgi 928 Mri Compatible Crt-D Device Syncav Technology, Deft Response, , Shock Guard, , 14 Pacing Vectors., Far Field Md Morphology Discriminator, Senseability, Dynamic Tx Over Current Detection, Af Suppression, At / Af Alerts, Chamber Onset, Corvue Congestion Monitoring Ce / Fda / Dcgi 929 Non Mri Bipolar Crt-D Device. 36J Delivered Energy, , Syncav Technology Deft Response, Shock Guard, , Far Field Md Morphology Discriminator, Senseability, Dynamic Tx Over Current Detection, Patient Notifiers, Af Suppression, At / Af Alerts, Chamber Onset Ce / Fda / Dcgi 930 Absorbable Antibacterial Surgical Mesh Envelope For Cardiac Implantable Electronic Devices ( Cieds ) And Pacing System 931 Physiological Pacing Leads- The Steroid-Eluting, Bipolarmri Lead 932 Subcutaneous Icd-Size-83.1 X 69.1 X 12.7 Mm, Weight - 130 G, Volume - 59.5 Cc, Longivity – Minimum Of 7 Years 933 Leadless Pacemaker – Screw In Type 934 Leadless Pacemaker – Tined Type 935 Transcatheter Pacing System, Leadless Withav Synchrony 936 Quadripolar Fixed Catheter-For Electrophysiology Interventions 937 Cables For Quadripolar Fixed Catheter-For Electrophysiology Interventions 938 Quadripolar Steerable Catheter-For Electrophysiology Interventions 939 Bi Quadripolar Steerable-For Electrophysiology Interventions 940 Decapolar Fixed Catheter-For Electrophysiology Interventions 941 Decapolar Cables-For Electrophysiology Interventions 942 Hexapolar Unipolar Recording Catheter-For Electrophysiology Interventions 943 Hexapolar Unipolar Recording Cable-For Electrophysiology Interventions 944 Decapolar Steerable Catheter-For Electrophysiology Interventions 945 Ibi-Decapolar–Steerable Catheter-For Electrophysiology Interventions 946 Ibi-Decapolar Cables-For Electrophysiology Interventions 947 Ibi-Decapolar- Steerable With Lumen-For Electrophysiology Interventions 948 Ibi-Decapolar Steerable–Paediatric-For Electrophysiology Interventions 949 Duodecapolar Catheter–Speciality-For Electrophysiology Interventions 950 Therapy Ablation Catheter–Paediatric-For Electrophysiology Interventions 951 Therapy Ablation Catheter-4Mm-For Electrophysiology Interventions 952 Therapy Ablation Catheter-8Mm-For Electrophysiology Interventions 953 Thermocouple Ablation Catheter4mm-For Electrophysiology Interventions 954 Thermocouple Ablationcatheter8mm-For Electrophysiology Interventions 955 Bidirectional Ablationcatheter4mm-For Electrophysiology Interventions 956 Bidirectional Ablationcatheter8mm-For Electrophysiology Interventions 957 Coolpathcatheter-4Mm-For Electrophysiology Interventions 958 Coolflex-For Electrophysiology Interventions 959 Blubidirectional Irrigated Catheter-For Electrophysiology Interventions 960 Ablation Cables To Ibi Generator-For Electrophysiology Interventions 961 Ablation Cable To Stockert / Ept Generator-For Electrophysiology Interventions 962 Coolpoint-Tubing Set-For Electrophysiology Interventions 963 Haemostasis Introducer-For Electrophysiology Interventions 964 Haemostasis Introducer-2Port-For Electrophysiology Interventions 965 Haemostasis Introducer-3Port-For Electrophysiology Interventions 966 Transseptal Guiding Introducers For Ep-For Electrophysiology Interventions 967 Braided Transseptal Guiding Introducers For Ep-For Electrophysiology Interventions 968 Speciality Sheath For Transseptal Guiding Introducers-For Electrophysiology Interventions 969 Steerable Introducer For Ep-For Electrophysiology Interventions 970 Mullins Sheath With Tipmarkers-For Electrophysiology Interventions 971 Surface Electrode Patch-For Electrophysiology Interventions 972 Mapping Catheter-For Electrophysiology Interventions 973 Bidirectional Spiral Catheter-For Electrophysiology Interventions 974 Varicose Vein , Laser Fibre , Radialfibre -Ic , Pu-5 Length 2.5 M, Fibre Tip -1.85 Mm , Cl- 6F 975 Varicose Vein , Laser Fibre , Radial Two Ringfibre -Ic , Pu-5 Length 2.5 M, Fibre Tip- 1.85 Mm , Cl 6F 976 Varicose Vein , Laser Fibre , Radial Two Ringslim Fibre -Ic , Pu-5 Length 2.5 M, Fibre Tip -1.25 Mm , Cl 4F 977 Varicose Vein , Laser Fibre , Radial Slim Fibre -Ic , Pu-5 Length 2.5 M, Fibre Tip , 1.25 Mm , Cl 4F 978 Varicose Vein , Laser Kit, Radial Slim Kit / Venflon -Ic , Pu-5, Length 2.5 M, Fibre Tip , -1.25 Mm 979 Varicose Vein , Laser Kit, Radialkit -Ic , Pu-5, Length 2.5 M, Fibre Tip , -1.85 Mm 980 Varicose Vein , Laser Kit, Radialtwo Ring Kit -Ic , Pu-5, Length 2.5 M, Fibre Tip -1.85 Mm 981 Varicose Vein , Laser Kit, Radial Slim Two Ringkit -Ic , Pu-5, Length 2.5 M, Fibre Tip , -1.25 Mm 982 Double Loop Spiral Catheter-For Electrophysiology Interventions 983 Laryngoscope Blade : Laryngoscope Bladesize Ranging From 1 To 4 984 Cord For Bipolar Cautery Forceps, 985 Cord For Unipolar Cautery Forceps 986 Electropad For Cautery 987 5 F, 6Fflow Directed Temporary Pacing Lead With Balloon, 8 Mm Balloon, Length 110Cm 988 5F, 6F Ordinary Temporary Pacing Lead110cmlong , 2Mm Bipolar Electrodes 989 5F Ordinary Temporary Pacing Lead, Length-105Cm, 110Cm, Electrode Spacing-15Mm, 25Mm 990 5F, 6F, 7F, Temporary Pacing Lead, 100, 125Cm, Bipolar 991 Torque Device 992 Ecg Paper 993 Ecg Paper , Ge Compatible , 80Mm, Red Grid 994 Ecg Paper , Cardiograph 1200 Compatible, Thermal Paper Size:216Mm Length:20M 995 Eto Paper For Sterilization ( Eto Reel ) Size:5Cmx200m, 7.5Cmx200m, :10Cmx200m, :15Cmx200m, :20Cmx200m, :25Cmx200m, :30Cmx200m, 35Cmx200m, 40Cmx200m 996 Tmt Paper Thermal Paper For Ge Treadmill Machine 997 Tmt Paper ( Thermal Papper ) For Schiller Tread Mill Machinea4 Size, Z Fold Type 998 Radiolucent Ecg Electrodes:Electrodes That Are Radio Lucent So As Not To Interfere With Imaging In The Cath Lab ; 3 M Quality Which Show Minimum Artefacats In Ecg Display During Cath Procedures And Tread Mill Testing 999 Defibrillator Recording Plain Thermal Paper, Width 50 Mm 1000 Trop T Trop I Test Strip , 25 Strips Pack.Alere Machine Compatible 1001 Trop T Trop I Test Strip , For Qc. Alere Machine Compatible 1002 Ecg Electrodes 3M Compatible With Least Noise And Artefacts In Treadmill, Radiolucent 1003 Presure Injector Syringe 150 Ml, Medrad Arterion Mark 7 Compatible 1004 3 Port Manifold, Right Port, Halfbody, With On / Off Handle 1005 Negative Pressure Syringe With Male Leur Lock, 10Ml, 20Ml, 50Ml 1006 Pressure Connector, 100-200Cm 1007 Pressure Connector For Pressure Injector 1008 Elastic Adhesive Bandage 10Cm Width*Stretched Length 4 / 6M 1009 Angiogram Kit ;Gowns-4 Nos, Trolly Sheet - 5Nos, Longhole Sheet ( 250Cmx160cm ) -5, Nos, Hand Towel-5Nos, 1010 Angiogram Kit ;Gowns-2Nos, Trolly Sheet - 1Nos ( 150*200Cm ) , Longhole Sheet ( 250Cmx160cm ) -1, Nos, Hand Towel-2Nos, C-Arm Protection Cover-1Nos, Mopping Pad -1 Nos 1011 Angiogram Kit ;Gowns-3Nos, Trolly Sheet - 2Nos ( 150*200Cm ) , Longhole Sheet ( 250Cmx160cm ) -2, Nos, Hand Towel-3Nos, C-Arm Protection Cover-1Nos, Mopping Pad -1 Nos 1012 Angiogram Kit ;Gowns-4Nos, Trolly Sheet - 2Nos ( 150*200Cm ) , Longhole Sheet ( 250Cmx160cm ) -2, Nos, Hand Towel-4Nos, C-Arm Protection Cover-1Nos, Mopping Pad -1 Nos 1013 Angioplasty Kit: 3 Layered Absorbent Pp Spun Bond Nonwoven Fabric ( 5 Long Hole Sheet -250Cmx160cm, Doc Gown-3, Trolly Sheet-5, Per Kit ) . Transparent Cover For Radiation Protection Shield-1 1014 Angiogram Kit; Gown-3 Nos, Hand Towel-3, Trolley Sheet 1 No ( 280Cmx200cm ) , Angogram Drape With Collection Pouch ( 300X200 ) -1, Mopping Pad-3 Nos, Hole Towel ( 75X75 ) -1 No, C-Arm Protection Cover -1 No, Wrap Sheet ( 125X100 ) -1 No- Cdsco Approved 1015 Patient Gown: Front Open 1016 I V Cannula: No 18 G Sterile 1017 I V Cannula: No 16 G Sterile 1018 I V Cannula: No 20 G Sterile 1019 Suture Materials-Silk -1.0 1020 Suture Materials-Vicryil -2.0 1021 Suture Materials-Monocril- 3.0 1022 Suture Materials-Nylon -0 1023 Iv Needles: No 16 G Sterile 1024 Iv Needles: No 18 G Sterile 1025 Iv Needles: No 20 G Sterile 1026 Butterfly Needles / Scalp Vein Set , All Sizes 1027 Oxygen Mask 1028 Nebulizer Mask 1029 Syringes: 2 Ml, Sterile Luer Lock 1030 Syringes: 5 Ml, Sterile Luer Lock 1031 Syringes: 10 Ml, Sterile Luer Lock 1032 Syringes: 3 Ml, Sterileluer Lock 1033 Syringes: 50 Ml, Sterile 1034 Syringes: 20 Ml, Sterile 1035 Syringes: 50 Ml, Sterile Luer Lock 1036 Syringes: 20 Ml, Sterileluer Lock 1037 Dynaplaster ( 10 X 416Cm ) : 1038 Iv Drip Set ( Macro ) Sterile , Non Vented 1039 Iv Drip Set ( Macro ) Sterile, Vented 1040 Sterile Plastic Sheet 1041 Button Switch Pencil For Electrocautery, Disposable Blade Electrode, Cord Length-3Mtrs 1042 Contrast Media- Iohexol , 100Ml ( 300 / 350Mg Iodine / Ml ) 1043 Contrast Medianon Ionic ( Iso Osmolar ) - Iohexol , 100Ml ( 300 / 350Mg Iodine / Ml ) 1044 Contrast Media- Iopromide, 100Ml ( 300 / 350Mg Iodine / Ml ) 1045 Contrast Media- Iomeprol, 100Ml ( 300 / 350Mg Iodine / Ml ) 1046 Contrast Media- Iopamidol, 100Ml ( 300 / 350Mg Iodine / Ml ) 1047 Contrast Media- Ioversol, 100Ml ( 300 / 350Mg Iodine / Ml ) 1048 Contrast Media ( Dimer ) - Iodixanol, 100Ml ( 300 / 350Mg Iodine / Ml ) 1049 Contrast Media Non Ionic ( Iso Osmolar ) ( Dimer ) - Iodixanol, 100Ml ( 300 / 350Mg Iodine / Ml ) 1050 Contrast Media ( Dimer ) - Ioxaglate, 100Ml ( 300 / 350Mg Iodine / Ml ) 1051 Contrast Media- Iohexol , 50-90Ml ( 300 / 350Mg Iodine / Ml ) 1052 Contrast Media- Iopromide, 50-90Ml ( 300 / 350Mg Iodine / Ml ) 1053 Contrast Media- Iomeprol, 50-90Ml ( 300 / 350Mg Iodine / Ml ) 1054 Contrast Media- Iopamidol, 50-90Ml ( 300 / 350Mg Iodine / Ml ) 1055 Contrast Media- Ioversol, 50-90Ml ( 300 / 350Mg Iodine / Ml ) 1056 Contrast Media ( Dimer ) - Iodixanol, 50-90Ml ( 300 / 350Mg Iodine / Ml ) 1057 Contrast Media ( Dimer ) - Ioxaglate, 50-90Ml ( 300 / 350Mg Iodine / Ml ) 1058 Tenectaplase:Thrombolytic Agent, Vial Of 50 Mg 1059 Polidocanol Injection 3% , 2 X 2 Ml 1060 Tirofiban 5Mg / 100Ml ( 50Mcg / Ml ) 1061 Porcine Heparin 1062 Cables-For Electrophysiology Interventions 1063 Optima Cables-For Electrophysiology Interventions / 1064 Egm Cable-For Electrophysiology Interventions 1065 Grounding Pad-For Electrophysiology Interventions 1066 Light Weight Radiation Protection Aprons ( With Lead Equivalence 0.5Mm Pb ) , Tungsten, Bismuth & Antimony Shield With Lead 1067 Lead Visor For Head Protection, 1068 Headcap 1069 Leadless Aprons 1070 Gonad Shield / Ovary Shield ( Lead Equivalence - 1Mm Pb ) 1071 Thyroid Collar ( Lead Equivalence 0.5 Mm Pb ) 1072 Radiation Protection Gloves ( Lead Equivalence 0.25 Mm Pb / 0.35 Mm Pb / 0.5 Mm Pb 1073 Table Front Panel Radiation Protection Shield, 22”X24”, Nylon Fabric, Weight Starting From – 7.5Lbs, Curtain Type 1074 Pressure Bag Meter Gauge ( Reusable ) 1075 Pressure Bag Meter Gauge 1076 Pressure Dome For Pressure Transducer 1077 Pressure Transducer Cable 1078 Betadinesolution-7.5% Povidone Iodine Skin Antiseptic Lotion, With Dispenser 1079 Surgical Scrub- Antimicrobial Surgical Scrub With 4% Chlorhexidine Gluconate With Dispenser 1080 Antimicrobial Incise Drapes Impregnated With Iodine Povacrylex ( 0.7% Available Iodine ) : 35Cmx35cm 1081 Act Tube , For Actalyke Mini Act Machine 1082 Ultra Sound Scanning Gel -5 Kg Pack 1083 Ultra Sound Scanning Gel 1084 Electrode Contact Gel 1085 Cidex Tray: Length Ranging From 125 To 150Cm, Breadth Ranging From 20 To 30Cm, Depth Ranging From 15 To 25Cm, Stainless Steel Or Plastic 1086 Dialysis Fluid, Acid Concentrate For Fresenius 5008S Dialysis Machine 1087 Chitosan Based Adsorbant Haemostat, Various Sizes 1088 Sterile Radiation Protection Drapes For Angiography 1089 Triple Lumen Venous Catheter 1090 Inj.Nikorandil 48Mg 1091 Dexmeditomedine 200Mcg Inj 1092 Mephenteremine Inj 30 Mg / Ml 1093 Adenosine Inj 3Mg / 6Mg / 12 Mg 1094 Nitroglycerin Inj 25Mg / 5Ml 1095 Dilzem Inj 25 Mg 1096 Tirofiban Inj. 1097 Niv Mask 1098 Niv Tubings 1099 Central Line 6F 1100 Camera Cover 1101 Bougie 1102 Sms Wrapper Sheet ( 50X50, 60X60, 75X75, 90X90, 100X100, 120X120, 150X150 ) 1103 Plane Tape 1104 Documentation Labelling Gun 1105 Eto Catridge ( 3M ) 1106 Thermal Paper For Eto Machine 8Cm 1107 Class 5 Indicator Eto 1108 Documentation Label Eto 1109 Sealing Machine Belt 1110 Nzymed Eid 920 1111 3 Way 10Cm Extension 1112 3 Way 100Cm Extension. 1113 Luer Lock ( 10Ml, 20Ml, 50Ml ) 1114 Pmo Line, Length 200Cms 1115 High Pressure Tubing 1116 Transcatheter Edge To Edge Mitral Valve Repair Apparatus - Mitra Clip Ntr / Xtr / G4, Clip Delivery System With Steerable Guiding Catheter 1117 Absorbable Gelatin Powder ( Gelfoam ) 1118 Coronary Control Syringes 10Ml, 20Ml 1119 Thrombin Injection For Intravascular Use
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 20
Kerala View Result →
27.
Defence #9162738 Technical Bid
438/Sss/110(L)/Rme Procurement Of Portable Radiation Monitoring Equipment , Contamination Monitor For Gamma And Beta Measurement, With 100,000 Cps Or 100,000 Bq/Cm^3 Display Range, Ip67 Enclosure And Iec/Ce Compliant , ?R Radiation Survey Meter With 1” X 1” Nal Detector. Range: 0-500?R/H Make Para Electronics- Mumbai , Portable Radiation Survey Meter With Internal Gm Detector And Telescopic Pole Having External Detector For Dose Rate Measurement Up To 10Sv/H , Neutron Rem Counter With He Detector And Moderator , Hand Held Isotope Identifier With Neutron Counts Measurement, Gamma Dose Rate Measurement And Isotope Identification Having Large Lcd Display , Portable Environmental Monitoring System Low: 0.001Mr/H-100Mr/H High- 1Mr/H- 1000Mr/H (Gui Software With Pc For Detectorprobe Gpw 16A) , High Range Survey Mater (Gamma-X-Ray) 0.1Mr/H-10R/H 0-99999Cps , Beta Surface/ Floor Contamination Monitor 0-2000 Cps , Environment Radiation Monitor
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Andhra Pradesh View Result →
28.
Drinking Water Supply and Sanitation #9118890 Technical Bid
Tender For Green Space Development At Saminathan Nagar Park In Thuraiyur Municipality.; 1 Earth Work Excavation For Foundation In Hard Stiff Clay, Stiff Black Cotton, Hard Red Earth, Shales Murram, Gravel, Stoney Earth And Earth Mixed With Small Size Boulders Ss.20B And Sand, Silt Or Other Loose Soil, Wet Sand Or Silt Not Under Water, Light Black Cotton Soil, Sandy Loam Ordinary Soil And To Full Depth As May Be Directed Except In Hardrock Requiring Blastinginclusive Of Shoring Shuttering And Baling Out Water And Cleaning And Levelling The Site Etc., Complete - Narrow Foundations - Upto 2.00M Depth 2 Earth Work Excavation For Foundation In Hard Stiff Clay, Stiff Black Cotton, Hard Red Earth, Shales Murram, Gravel, Stoney Earth And Earth Mixed With Small Size Boulders Ss.20B And Sand, Silt Or Other Loose Soil, Wet Sand Or Silt Not Under Water, Light Black Cotton Soil, Sandy Loam Ordinary Soil And To Full Depth As May Be Directed Except In Hardrock Requiring Blastinginclusive Of Shoring Shuttering And Baling Out Water And Cleaning And Levelling The Site Etc., Complete - Open Earth Work Excavation 3 Supplying And Filling In Foundation Andbasement With Crushed Stone Dust In Layers Of Not More Than 15Cm Thick Well Rammed Watered And Compacted Etc., Complete Complying With Standard Specification. 4 Plain Cement Concrete 1:4:8 ( One Cement, Four Fine Aggregates And Eight Coarse Aggregates ) Using 40Mm Size Iss Hbg Metal Including Cost And Conveyance Of All Materials To Site And Labour Charges And All Incidential Charges Such As Water Providing Etc., Complete As Per Standard Specification 5 Supplying And Erecting Steel Centering Including Necessary Supports For Plane Surfaces For Reinforced Cement Concrete Works Such As Column Footings, Column Pedestals, Plinth Beams, Grade Beams, Staircase Steps, Etc. Which Require Only Nominal Strutting Using Mild Steel Sheets Of Size 90Cm X 60Cm And 10 Bg Stiffened With Welded Mild Steel Angles Of Size 25Mm X 25Mm X 3 Mm For Boarding, Laid Over Silver Oakjoists Of Size 10Cm X 6.5Cm Spaced At About 75Cm Centre To Centre Or At Suitable Intervals Etc. Complete In All Floors Complying With Standard Specifcation - 6 Plinth Beam 7 Centering For Soffits Of Rcc Slabs Of Plane Surface Like Lintels, Beams , Etc., Including Strutting 3M High Using Mild Steel Sheets Of Size 90Cm X60cm X And B.G 10 Stiffened With M.S Angles Of Size 25Mm X 25Mm X 3Mm Laid Over Silver Oak ( C.W ) Joists Of Size 10Cm X 6.5Cm ( Spaced At About 90Cm C / C ) And Supported Dy Casurina Props Of 10Cm To 13Cm Dia ( Spaced Of 75Cm C / C ) Complying With Standard Specification And Directed - For Plane Surfaces Such Asrectangular Or Square Rcc Columns, Sunshades, Top And Bottom Slab Of Rcc Boxing, Etc. 8 Column 9 Lintel, Slab 10 Providing And Laying In Position Standardised Concrete Mix M-20 Grade In Accordance With Is 456 - 2000 Using 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cement Contenet Of 325Kg / Cum And Maximum Water Cement Ratio Of 0.55 Including Admixture ( Plasticiser / Super Plasticiser ) In Recommended Proportions As Per Is 9103 To Accelerate, Related Setting Of Concrete, Improve Workability Without Imparing Strength And Durability With About ( 5.0Cum ) , 7730Kg Of 20Mm Machine Crushed Stone Jelly And With About ( 3.3 Cum ) , 5156Kg Of 10 - 12Mm Machine Crushed Stone Jelly And With About ( 4.79Cum ) 7670 Kg Of Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges Centering And Shuttering But Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc And Providing Fixtures Like Fan Clamps In The Rcc Floor / Roof Slabs Wherever Necessary Without Claiming Extra Cost Etc., Complete Complying With Standard Specification And As Directed By The Departmental Upto Basement 11 Providing And Laying In Position Standardised Concrete Mix M-20 Grade In Accordance With Is 456 - 2000 Using 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cement Contenet Of 325Kg / Cum And Maximum Water Cement Ratio Of 0.55 Including Admixture ( Plasticiser / Super Plasticiser ) In Recommended Proportions As Per Is 9103 To Accelerate, Related Setting Of Concrete, Improve Workability Without Imparing Strength And Durability With About ( 5.0Cum ) , 7730Kg Of 20Mm Machine Crushed Stone Jelly And With About ( 3.3 Cum ) , 5156Kg Of 10 - 12Mm Machine Crushed Stone Jelly And With About ( 4.79Cum ) 7670 Kg Of Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges Centering And Shuttering But Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc And Providing Fixtures Like Fan Clamps In The Rcc Floor / Roof Slabs Wherever Necessary Without Claiming Extra Cost Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers - The Coarse And Fine Aggregates To Be Used Should Comply With The Requiremnents Of Is Standards. ( No Separate Payment Will Be Made By The Department For The Excess Usage Of Materials ) - Ground Floor 12 Supply And Fabrication Of Steel Required For All Rcc Items Of Works Involved In The Schedule, Cost Of Steel At Site Fabrication, Labour Charges For Cleaning The Rods Straightening, Cutting, Bending, Tying Grills, Including Overlapping To The Required Length Whenever Necessary And Placing The Reinforcement In Position As As Per Design Given And Specified In The Drawings, Including Cost Of Binding Wire, Provision Of Spacer Bars, Cover Blocks And All Other Incidental Charges Etc Complete As Per Standard Specification 13 Plain Cement Concrete 1:2:4 ( One Cement, Two Fine Aggregates And Four Coarse Aggregates ) Using 20Mm Size Iss Hbg Metal Including Cost And Conveyance Of All Materials To Site And Labour Charges And All Incidential Charges Such As Water Providing Etc., Complete As Per Standard Specification 14 Brick Work In Cm 1:5 ( One Cement & Five Crushed Stone Sand ( M- Sand ) ) Using Ii Class Ground Moulded Bricks Of Size 9 X 43 / 8X 2 3 / 4 Including Finishing, Curing, Etc., Complete Complying With Standard Specification - 100Cft - Ground Floor 15 Plastering With Cement Mortar 1:3 ( One Part Of Cement And Three Part Of Plastering Sand ( P- Sand ) ) , 10Mm Thick In All Floors Including Cost And Conveyance Of All Materilas To Site And Labour Charges Etc, Complete As Per Standard Specifications 16 Plastering With Cement Mortar ( 1:5 ) 12 Mm Thick In All Floors Including Cost And Conveyance Of All Materilas To Site And Labour Charges Etc, Complete As Per Standard Specifications. 17 Providing And Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam ( Wmm ) Specification Including Premixing The Material With Water At Omc In Mechanical Mix Plant Carriage To Mixed Material By Tipper To Site Laying In Uniform Layers With Paver In Sub Base / Base Course On Well Prepared Surface And Compacting With Vibratory Roller To Achive The Desired Density Complete As Per Clasue 406 Of Morth Specifications. 18 Supplying And Laying Rubberised Interlocking Paver Blockm40 Grade Providing And Laying Of63mmthick High Strength Type Conforming Is 15658-2006 Of Rubberized Interlocking Paver Lock In Size Of Minimum Compressive Strength Of 40N / Mm2 In Uniform Shape Of Approved Make To Be Laid In Flurring Bone Pattern With Stone Dust Cushion Below The Uniform Shap Of Approvednon Skitting Surface In The Top And The Rate Including Levelling The Base Preparation Ofpavers As Sub Base, Stone Dust Cushion 150Mm Thick Layingout Of Pavement Cut The Pieces To Fix The Edge Vibring The Pavers, Sweeping Tranporting Loading Unloading Of Laying Paver Block As Per Standard Specification, . 19 Paving The Floor With Design Antiskirt Ceramic Tiles ( Colour And Shade As Directed ) Of Size 305 Mm X 305Mm X 6 Mm In All Floors Over A Base Layer Of Cement Mortar 1:3 ( One Part Of Cement And Three Part Of Plastering Sand ( P- Sand ) ) , 20Mm Thick Laid In-Situ And Pointed With Same Coloured Cement 20 Paving The Floor With Double Charged Vitrified Tiles Of Approved Quality And Colour Of Size 600X600x8mm Thick Of Approved Make, Quality And Colour In All Floors Over A Base Layer Of Cement Mortar 1:3 ( One Part Of Cement And Three Part Of Plastering Sand ( P- Sand ) ) , 20Mm Thick And Laid Straight Alignment And Pointed Neatly With Colour Cement At The Rate Of 0.40Kg / M2 Laid Without Any Air Gap In The Tiles Neatly And Fixing In Position As Per Standard Specifications And As Directed By The Departmental Officer.The Colour & Quality Of Tiles Should Be Got Approved By Municipal Engineer Before Use On Work 21 Dadooing Walls Withglazed Tiles Of Sizes 305Mm X 200Mm X 6Mm Size Of Approved Make And Quality And Colour Set In Cement Mortar 1:2 ( One Part Of Cement And Two Part Of Plastering Sand ( P- Sand ) ) Over 10 Mm Base Layer Plastering And Pointing With White Cement Neatly As Directed 22 Providing Upvc ( Un-Plasticized Polyvinyl Chloride ) Door:Providing And Fixing Casement Dorrs Fabicated From Un-Plasticzed Polyvinyl Chloride ( Upvc ) Sections. Profiles:The Profiles Should Be Three Chamber System Which Provides High Insulation Properties Which Outer Frame 60Mmx55mm With An Outer Wall Thickness Of 2.4Mm.The Window Unit Should Be Desined With All Corner Jointsmitred And Fusion Welded. Windows Should Be Steel Reinforced With 25X24x25mm Steel Reinfocrement With A Thickness Of 1Mm To Have Dimensional Stability.The Sash Shold Be Of 60X102mm. The Mulion Should Be Of 60X74mm The Profile 23 Supplying And Fixing Upvc ( Un-Plasticized Polyvinyl Chloride ) Windows Of Casement Type ( Open ) From The Profile The Size Of Outer Frame 60Mm X 58Mm And Shutter Profile Are Reinforcement With Gi / 1Mm 25Gsm And 100% Corrosion Free, The Profiles Are Multi Chambered Sections With Wall Thick Of 2Mm. The Epdm Rubber ( Black Colour ) Covered With Over All The Edges Of Frame And Shutter The Shutter Will Be Provided With Spag Multi Power Point Locks And Also It Operates As Handle. The Corners And Joints Should Be Welded And Cleaned. Radiations Free Pin Headed Plain Or Brown Olour Glass 4Mm Thick Should Be Provided To The Shutter And It Should Not Allow Leakage Of Water Even At Most Ranging Storms And Should Have Key Lockable Action, Security Protective Hinges, Strong Locking Systems And As Per Size For Arresting Noise And Energy Loss. The Connecting Mechanism Between Sash And Outer Frame That Enables Opening Of The Window. The Window Should Be Fixed To The Wall With 100% Packing With Screws And Silicon Packing All Round The Frames. The Window Should Be Got Approved From The Executive Engineer Before Use On Work 24 Supplying And Fixing Upvc ( Un-Plasticized Polyvinyl Chloride ) Louvered Ventilators Of From The Profile The Size Of Outer Frame 60Mm X 58Mm And Shutter Profile Size Of 60 X 78Mm Both Profiles Are Reinforced With Gi / 1Mm 125Gsm And 100% Corrosion Free, The Profile Are Multi Chambered Sections With Wall Thick Of 2Mm. The Epdm Rubber ( Black Colour ) Covered With All Over The Edges Of Frame And Shutter. The Corners And Joints Should Be Welded And Cleaned. Radiations Pin Headed Glass 4Mm Thick Should Be Provided In The Louvers. The Window Should Be Fixed To The Wall With 100% Packing With Screws And Silicon Packing All Round The Frames. The Ventilator Should Be Got Approved From The Executive Engineer Before Use On Work 25 Weathering Course With Concrete Broken Brick ( S.I.No.278 ) & ( P & D ) Data 54.Jelly 20Mm Gauge In Pure Slaked Lime ( No Sand To Be Added ) Over Roof Slab, The Proportion Of Brick Jelly To Lime Being 32 To 12.5 Well Beated With Wooden Beaters For Giving Required Slope And Thickness As Directed By The Departmental Officers.Etc., Complete As Per Standard Specification. 26 Finishing The Top Of Roof With One Course Of Machine Pressed Tiles Of Size 200 Mm X 200 Mm X 20 Mm Of Approved Quality In Cement Mortar 1:3 ( One Cement Add Three Sand ) 12 Mm Thick Mixed With Water Proofing Compound Conforming To Iss At 2% By Weight Of Cement Used And The Joints Pointed Neatly To Full Depth Of Tiles With The Same Cement Mortar Mixed With Red Oxide And Water Proofing Compound Including Curing Etc., Complete As Per Standard Specification. 27 Manufacturing, Supplying And Fixing Of Stainless Steel Hand Rails For Staircase Using 50Mm Dia 304L Grade Stainless Steel Pipe Of 1.60Mm Thick At Required Locations To A Height Of 900Mm From Finished Floor Level Welded To 38Mm Dia Stainless Steel Pipe Post Of 1.00Mm Thick As Vertical At 900Mm Centre With 2 Nos. Of 25Mm Dia Intermediate Horizontal Stainless Steel Pipe Of 1.60Mm Thick In Between. The Vertical Pipe Has To Be Welded To The 100 X 100 X 6Mm Ms Base Plate Encased In The Base Concrete. The Rate Is Inclusive Of The Charges For Cutting, Bending, Welding, Grinding, Polishing, Conveyance, Electrical Charges, Etc. Complete 28 Supply And Fixing Of M.S Grills With Doors And Windows With One Coat Of Red Oxide With Primer Including All Costs Such As Welding, Grinding And Fabrication Charges, Cost And Conveyance Of All Materials To Site Etc, Complete As Per Standard Specification. 29 Painting Two Coats Of Newly Plastered Wall Surface With Approved Cement Paint Over Cement Plastered Wall Surface, Ceiling Andincluding Preparing The Surface, Clean Removal Of Dirt And Including Necessary Plaster Of Paris Putty Wherever Required And Cost Of Painting Materials, Brushes, Preparation Of Surfaces And Scaffolding Charges Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officer 30 Painting The New Iron Work With Two Coats Of Best Approved First Quality And Colour Of Synthetic Enamel Paint Over The Existing Red Oxide Priming Coat In All Floors Excluding Cost Of Priming Coat And Including Cost Of Painting Materials, Brushes, Putty, Preparation Of Surfaces And Scaffolding Charges Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officer. 31 Painting Two Coats For Interior Surface With Approved Interior Plastic Emulsion Paint Approved Quality And Colour Over A Priming Coat, Including Thorough Scrapping, Clean Removal Of Dirt, Etc Complete And Including Necessary Plaster Of Paris, Putty, Wherever Required Etc, Complete As Per Standard Specification. 32 Supplying And Fixing In Position White / Colour Glazed Model Floor Mounted European Water Closet Of Best Quality And Approved Make With 100Mm “P” Or “S” Trap Connecting With Ci Pipe Of 100Mm Dia / Pvc Pipe Of 110Mm Dia, Double Flapped Rigid Pvc Black Seat And Seat Cover With Cp Brass Hinges Including Cost Of White Cement, Cement For Packing, Spun Yarn, Teak Wood Plugs, Brass Screws, Etc., Including Supplying And Fixing 10 Liters Capacity Pvc / 12.5 Liters Capacity Porcelain Low Level Flushing Tank With A Pair Of Ci Brackets, Etc., Complete With All Fittings, Such As, 15Mm Brass Ball Valve With Polythene Float With Brass Handle, Union Coupling Connected By Means Of 40Mm White Pvc Flush Hand Using Indian Adopter Joint Including All Internal Fittings, Such As, 15Mm Bras Connections, 15Mm Gm Wheel Valve, 15Mm Brass Nipple ( 2 Nos. ) , 15Mm Nylon Connection, Tw Plugs, Screws And Also Giving Necessary Connection To The Pvc Pipe And Painting The Ci Brackets With 2 Coats Of Approved Paint Over One Coat Of Red Oxide Primer, Dismantling The Masonry And Re-Doing The Dismantled Masonry To Original Condition, Etc., Complete Complying With Standard Specifications. ( The Ewc And Flushing Tank With All Accessories Should Be Got Approved By The Executive Engineer Before Use On Works ) Floor Fitting 33 Supplying And Fixing In Position Best Quality Approved Make White Glazed Earthenware Wash Hand Basin Of Size 550 X 400 Mm With A Pair Of Cast Iron Brackets, Including Cost Of 15Mm Diametre Brass Chromium Plated Piller Tape, 32 Mm Diametre C.P. Waste Union, 32 Mm Diametre P.V.C. Waste Pipe With Rubber Plug And Chain, 15Mm Diametre G.M.Wheel Valve, 15Mm Dia Brass Nipple, 15Mm Dia Nylon Connections Etc., Including Fixing The Wash Hand Basin In The Wall In Position With A Pair Of C.I. Brackets With Teak Wood Plugs And Screws And Giving Necessary Water Supply Connection And Paintiung The Brackets With Two Coats Of Paint Over A Primimg Coat Of Anticorrosive Paint Including Testing For Leackage Etc., Complete Complying With Standard Specifications 34 Construction Of Inspection Chamber Of Sizw 60X60x60 With Necessary Earth Work Excavation 40Mm Size Brick Jolly Concretein Cm 1:4:10And 10 Broken Brick Jelly Work Cm 1:6 For 23 Cm Thick Wall Benching Chennelling And Plastering Interoir Etc, 35 Construction Of Inspection Chamber Of Sizw 60X60x90 With Necessary Earth Work Excavation 40Mm Size Brick Jolly Concretein Cm 1:4:10And 10 Broken Brick Jelly Work Cm 1:4 For 23 Cm Thick Wall Benching Chennelling And Plastering Interoir Etc, Rcc Loose Slab Coverin In Cc 1:2:4 36 Supply & Fixing Of 48 Sweep Size Celling Fan Of 5 Star Rated With Double Ball Bearing.Down Rod, Canopy Complete Set ( With Out Speed Regulator ) ( On Existing Clamp With 300Mm Down Pipe ) Sd 37 Wiring With2 X 1.5Sq.Mm. ( 22 / 0.3 ) Pvc Insulated Sc Unsheathed Copper Conductor Cable Of 1100V Grade In Suitable Heavy Gaugemsconduitpipeon Wall Andceiling Withms Accessories With Switch Boxwith5a Ft Switch Inflush Wit Hwall Andcovered Withhylum Sheet Of 3Mmthick Withpainting Of Suitable Colour Withcontinuou Searth Wireconnection Of 14 Swg Tc Wire For Light Point / Fan Point ( For Electronic Regu Sd 38 Supply And Fixing Of Surface Mount Patty Type 1X36 Watt T.L Fitting Complete With Electronic Ballast With Tw Round Blocks On Wall Or Ceiling With Flu Tube With Pvc Unsheathed Copper Leads From Terminal To The Fitting. Sd 39 Wiring With 2 X 1.5 Sqmm ( 22 / 0.3 ) Pvc Insulated Single Core Unsheathed Copper Conductor Cable Of 1100V Grade In Suitable Pvc Rigid Pipe Concealed In Wall And Ceiling With Pvc Accessories Inflush With Wall With 3Mm Thick Hylum Sheet Cover With Tw Switch Box And 5A F.T. Switch With Continuous Earth Wire Connection Of 14 Swg Tc Wire For Making Good Of The Concealed Portion With Suitable Colour For Pvc Concealed Light Point / Fan Point ( For Electronic Regulator ) . Sd 23 40 Supply And Fixing Of Wt Bulk Head Fitting With Guard Suitable For 11W Cfl Lamp With Cfcsd 83 41 Supply And Fixing Of300mm ( 12 ) Sweep Ac Exhaust Fan Complete With Necessary Wall Opening Sd 42 Supply And Fixing Isi Marked 2X26 Sq.Mm Cable 43 Supply And Fixing Hdpe Plan Pipe Of Size 50Mm With Silicon Coating 44 Laying Of Cable Alone Road / Street Through 50Mm Od Hdpe Pipe ( Trench Size 45Cm Width X 75Cm Depth ) 45 Supply And Fixing 32A Dp Mcb Isolator 46 Supply And Fixing Single Pole 6A To 32, 10Ka 47 Earthing As Per P.W.D Standard With An Earth Electrode Of 2 Mtr. Class B Gi Pipe Of Dia Not Less Than 32Mm Complete With Necessary Masonry Work Sd 234 48 Supply And Jointing 25Mm Dia Pipe 49 Supply And Jointing 20Mm Dia Pipe 50 Supply And Fixing Pvc Screw Down Tap 51 Supply And Fixing 25Mm Dia Wheel Valve 52 Supply And Fixing 20Mm Dia Wheel Valve 53 Supplying 50Mm Size Six Level Type Brass Lock Of Superior Make With Relevent Isi Keys In Duplication 54 Conducting Geophysical Survey, Quality And Quantity Test And Transportation Charges Etc, ( This Includes Labour Charges In The Field, Rent Of The Vehicle For Reaching The Place, Rent Of The Instrument And Excluding Charges For The Geologist ) 55 Drilling 6 Vertical Bore In Hard Rock Area To Any Required Depth As Directed By The Board Officers Including Labour Charges For Inserting Casing Pipes Assembly In The Directed Hole Including Welding The Joints If Necessary Grounding The Casing Pipes Etc., And Including Transporting From One Place To Another Etc., Complete Twad Sor-P.G.No-279, 2022-2023 56 Supply And Delivery Ofpvc Casing Pipe Of The 200Mm Dia Pipes As Per Is / 12818 / 92 And As Amended From Time To Time To Suit The Borewell Upto 150M Depth ( Cm ) With Isi Marking Including, Loading, Unloading , Freight, Stacking And Transit Insurance Charg 57 Labour Charges For Inserting Pvc Casing Pipes Assembly ( With Slots Or Without Slots ) In The Drilled Hole Including Jointing The Pipes With Pvc Couplers With Cement Paste Etc., Complete. 58 Earth Work Excavation For Foundationin Ordinary Soil Light Black Cotton Sandy Loam And Dry Silt Including Shoring, Strutting, Baling ( Or ) Pumping Out Wter Wherever Necessary And Refilling The Sides Of Foundation With Excavated In Layers Of 15Cm Thick And Depositing The Surplusat Places As Directed By The Dept. Officerswith Initial Lead And Lift Etc., Complete As Per Standard Specifications. 59 Refilling With Excavated Earth In Layers Of 15Cm Thick Including Watering And Ramming To Consolidation Etc Complete 60 Supply Of Upvc Pipe 32 Mm 61 Supply Of 50Mm Dia Gi Pipe 62 Supply Of 50Mm Dia Gi Elbow 63 Supply Of 50Mm Dia Gi Flange 64 Supply Of 63Mm Pvc Bend 65 Supply Of 63 Mm Pvc Elbow 66 Supply Of63 Mm Pvc Pipe ( 6Ksc ) 67 Supply Of 63 Mm Pvc Tee 68 Supply And Fixing Pvc Pipe 110Mm Rain Water Doen Wall Sd 69 Supply And Fixing Of Tneb Meter Board Suitable For 32A Single Phase Service Connection With 32A Fuse Unit ( 500V ) 32A Neutral Link And Earth Link ( 1 X 1 / 8 Copper Flat ) On Tw Plank Of Size 375Mm X 300Mm X 19Mm With Supporting Tw Reepers Of 1 Thick An Either Side With Painting With Suitable Bolt And Nuts For Fixing The Tw Plank On Wall With Earth Connection And Inter Connection With 7 / 20 Pvc Insulated Copper Wire From Eb Meter To Fuse Unit..Sd 127 70 Supply And Fixing Of 50Mm Dia Gm Gate Valve With Isi Make, The Cost Shall Including Materials, Fixing And Labour Charges Etc, Complete As Per Standard Specification.Sor 71 Supply Of 4 Sq.Mm Pvc Insulated And Sheathed 3 Core Flat Type Copper Cable Conforming To Is 694 / 1990 Sor 72 Supply Of3 Hp Three Phase100lpm X 75M Submersible Pumpset Suitable For 150Mm Dia Borewell Without Panel Board As Per Is 8034 / 2002 73 Supply Of 3 Hp Three Phase Panel Board- D.O.L. With Two Level Guard . Panel Board Should Be Provided As Per Specification ( Twad 22-23. P -111 ) 74 Supply Of Triple Pole Switches 32 Amps Tpn Metal Clad Switch With Rewirable Fuse Units ( Twad Sor-P.No-178 ) 75 Supply Of32 Amps Porcelain Fuse Unit ( 500 V ) ( Twad Sor-P.No-179 ) 76 Supply And Delivery Of Ms Kiosk Of Size 0.75M X 0.45M X 0.75M Made Up Of Ms Angle Of Size 50Mm X 50Mmx 4Mm Alround Covered With 16 Gauge Ms Sheet And Kiosk Door Made Up Of Ms Plates Of Size 25 Mm X 3 Mm Including Cutting, Welding, Grinding, Locking Arrangements And Labour Charges Etc., Twad 22-23. P -85 77 Supply And Fixing 200Mm Dia Pvc End Cap As Bore Cover On Topfor Securing 78 Supply And Run Of 4 Of 4 Sqmm ( 56 / 0.3 ) Pvc Insulated Sc Unsheathed Cu. Conductor Of 1100V On 7 / 20 Gi Bearer Wire For Service Connection Mains ( Sd-67 ) 79 Supply And Fixing Nylon Rope ( Pwd 22-23. P -105 ) 80 Supply And Delivery Of 25 Mm Dia Gi Pipes 81 Labour Charges For The Erection Of Submersible Pumpset In Borewell Including Fixing And Jointing Submersible Cable With Proper Clamps, Erection Clamps, Pressure Gaugesetc., Complete Andtesting The Pumpset And Trail Run For 10 Days. Sor 82 Earthing As Per P.W.D Standard With An Earth Electrode Of 2 Mtr. Class B Gi Pipe Of Dia Not Less Than 32Mm Complete With Necessary Masonry Work Sd 234 83 Supply & Fixing Of Ac / Dc 76Mm Buzzer Suitable For 230 Volts 50 C / S Single Phase Ac Supply On Suitable Tw Board With Push Switch. Sd 105 84 Supply And Fixing Of 6 Metre Length Single Bracket Pole With Base Plate ( 250 X 250 X 6Mm ) 76.10Mm Od X 3.65Mm Thick X 6000Mm Length In Control Box With Foundation Hardwares.Etc Completed As Per Standard Specification.As Per Pwd Sor-2022-2023 P.No-148 85 Supply And Fixing Of 25W Led Street Light Fittingas Per Pwd Sor P.No-115 86 Supply And Fixing Of 4 X 16 Sqmm Pvc Armoured Ltug Cable In A Trench To Be Excavated At A Depth Of 0.75M For Covering The Cable Complete With 2 Dia Pvc Pipe Etc, Complete Sd 87 Supply And Fixng Of Tneb Meter Board Suitable For 3 Phase 63A Service Connection Made Up Of Suitable Angle Iron Frame Work Of Size 2 Feet X 1-1 / 2 Feet Using Angle Iron Of Size 1-1 / 2 X 1-1 / 2 X 1 / 4 Rigidly Fixed On Wall Covered With Hylem Sheet Of Size 2 Feet X 1 / 2 Feet Of 6Mm Thickness With Necessary Bolts And Nuts Supports And Supply And Fixing Of 3 Nos. 63A Fuse Units ( 500V ) , 1 No. Neutral Link, Copper Earth Flat Of Size 1 X 1 / 4 With Inter Connection Of Eb Meter To Fuse Units By 16 Sq.Mm Pvc Insulated Copper Wire With Earth Connection Complete Ele-Sd-129 88 Supply And Fixing Of 200A Tpn Sheet Steel Double Break Switch With Hrc Fuses And Neutral On Suitable Angle Iron Frame Work With Ms Cable Entry Boxes And With Earth Connection Only Ele-Sd-170 89 Supplying And Fixing Of Double Swing Of Height 2.40M Height With 40Mm Diam.S. Pipes Support As Legs And Top Bar Is 50Mm Dia.The Seat Is 9Mm Thick Reinforced Rubber With Antiskid Chequred Top With Heavy Ball Bearing And The Suspension Is 7Mm Dia Electro Galvanized Chain And The Cost Shall Inclusive Of All Materials, Labours And Fixingetc, Complete As Directed By The Departmental Officers. ( Q ) 90 Supplying And Fixing Of Two Seater Seesaw For Below 12 Years Old Childrens To A Height Of 0.50M With 50Mm Dia Leaver And 40Mm Top Bar With M.S. Pipes. The Seater Is Of Moulded Plastic With Heavy Duty Bush Bearing. The Cost Shall Inclusive Of All Materials, Labours And Fixingetc, Complete As Directed By The Departmental Officers. ( Q ) 91 Supplying And Fixing Of Four Seater Seesaw For Below 12 Years Old Childrens To A Height Of 0.50M With 50Mm Dia Leaver And 40Mm Top Bar With M.S. Pipes. The Seater Is Of Moulded Plastic With Heavy Duty Bush Bearing. The Cost Shall Inclusive Of All Materials, Labours And Fixingetc, Complete As Directed By The Departmental Officers. ( Q ) 92 Supplying And Fixing Of Slide For Below 12 Years Old Childrens To A Length Of 3.00M With 80Mm Dia Leaver And 40Mm Top Bar With M.S. Pipes. The Seater Is Of Moulded Plastic. The Ladder Frame Is Made Up Of 25Mm M.S.Pipe, Hanrail 20Mm Dia M.S. Pipe And The Centre Support Is 80Mm Dia M.S. Pipethe Cost Shall Inclusive Of All Materials, Labours And Fixingetc, Complete As Directed By The Departmental Officers. ( Q ) 93 Supply And Fixing Of Duck Rider: [ Component ] Leg :Galvanished ‘C’ Class Pipe Galvanished ‘B’ Class Pipe Spring: Mild Steel Springduck:Frp With Isotolic Gel Coat With Uv Pigment. Paintingwith Pu Coating [ Required Area ] Product Area : 3Ft *3Ftplay Area : 5Ft*5Ft [ Measurement ] Width:3Ft ( Q ) 94 Supply And Fixing Ofmerry Go Round – 6 Seater ( Frp ) Height :3” Gi Pipe, 2.5Mm Thick, B Class Seat Size:15”X 14”, Paint: Pu Coating ( Q ) 95 Providing And Planting Of Ornamental Plants Like Golden, Bamboo, Focus Verities, Albania Verities, Buda Bamboo Trees, Etc With Inclosing Cost Of Plants, Red Earth Manure And Including All Labours Chargesfor Pit Excavation Fertilizing ( Q ) 96 Providing And Planting Of Palm Clusters Like As Harika Palm, Phoneix Palm, Sun Palm, Table Palm Etc With Including Cost Of Plants, Red Earth Manure And Including All Labour Charges For Pit Excavation Fertilizing Planting Etc Complete. ( Q ) 97 Providing And Planting Of Border Plants Using Duranda Clirodendrom, Follage, Exora, Pmc Neerium Etc With Inclosing Cost Of Plants, Red Earth Manure And Including All Labour Charges Earth Work Excavation Fertilizing Planting Etc Complete ( Q ) 98 Providing Three Seater Arrangements With Ready Made Granite Benches 20Mm Thick Slab With 1500Mm Wide , 600Mm Height. The Cost Shall Include All Labour And Materials And As Directed By The Departmental Officers. 99 Supply And Delivery Of 1000 Lit Capacity And Fixing Of Hdpe Tank As Per Is 12701 / 1996 Including Loading, Unloading, Transportation And Labour Charges For Fixing Of The Gi Pipes And Specials For Pipe Connection Works Including Cutting, Threading And Fixing Charges Etc., Complete As Per Standard Specification. Sor 100 Supply And Fixing Of 20Lit Capacity Tilting Type Stainless Steel Garbage Bins In Park Area As Per The Site Condition And As Directed By The Departmental Officers. 101 Supply And Erection Armoured Cat-6 Cable ( Pwd Sor P.No-153 ) 102 Supply And Erectionpoe Switch For Camera-8 Port ( Pwd Sor P.No-154 ) 103 Supply And Erection Hard Disk For Nvr 4Tb ( Pwd Sor P.No-155 ) 104 Supply And Erection Net Work Video Record For Cctv 8 Channel-Sata 1 No Hard Disk ( Pwd Sor P.No-154 ) 105 Supply And Erection Of Cctv Camera 106 Supply And Erection Of Rack With Accessories 6U Rack ( Pwd Sor P.No-155 ) 107 Supply And Erection I / O Soket Rj 45 ( Pwd Sor P.No-155 ) 108 Supply And Erectioni / O Soket Rj 11 ( Pwd Sor P.No-155 ) 109 Supply And Erection Of 29 Led Tv 110 Provision For Goods And Service Tax 18%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
29.
Drinking Water Supply and Sanitation #9118825 Technical Bid
Tender For Construction Of Weekly Market At Ward No.3, Survey No.3; 1 Earth Work Excavation For Foundation In Hard Stiff Clay, Stiff Black Cotton, Hard Red Earth, Shales Murram, Gravel, Stoney Earth And Earth Mixed With Small Size Boulders Ss.20B And Sand, Silt Or Other Loose Soil, Wet Sand, Or Silt Not Under Water, Light Black Cotton Soil, Sandy Loam Ordinary Soil And To Full Depth As May Be Directed Except In Hardrockrequiring Blasting Inclusive Of Shoring Shuttering And Baling Out Water And Cleaning And Levelling The Site Etc., Complete 10 Cum ( Data ) 2 Footing 3 Supplying And Filling In Foundation Andbasement With Filling M-Sand In Layers Of Not More Than 15Cm.Thick Well Rammed Watered And Compacted Etc., Complete Complying With Standard Specification. Data 4 Refilling With Excavated Earth In Layers Of 30 Cm Watered Well Rammed And Consolidatred Conforming To Standard Specification Including Labour Charges As Directed By Engineer In Charge 5 Supplying And Filling The Basement With Good Earth Filling In Layers Of Not More Than 15Cmthick Well Rammed Watered And Compacted - Etc., Complete Complying With Standard Specification. 6 Plain Cement Concrete 1:4:8 ( One Cement Four Fine Aggregates And Eight Coarse Aggregates ) Using 40Mm Size Iss Hbg Metal Including Cost And Conveyance Of All Materials To Site And Including For The Mixing, Laying And Labour Charges And All Incidential Charges Such As Water Providing Etc., Complete As Per Standard Specification 7 Supplying And Erecting Steel Centering Including Necessary Supports For Plane Surfaces For Reinforced Cement Concrete Works Such As Column Footings, Column Pedestals, Plinth Beams, Grade Beams, Staircase Steps, Etc. Which Require Only Nominal Strutting Using Mild Steel Sheets Of Size 90Cm X 60Cm And 10 Bg Stiffened With Welded Mild Steel Angles Of Size 25Mm X 25Mm X 3 Mm For Boarding, Laid Over Silver Oakjoists Of Size 10Cm X 6.5Cm Spaced At About 75Cm Centre To Centre Or At Suitable Intervals Etc. Complete In All Floors Complying With Standard Specifcation. ( Payment For Centering Shall Be Given After The Concrete Is Laid ) 8 Supplying And Erecting Centering For Sides And Soffits Including Necessary Supports And Strutting Upto 3.29 M Height For Plane Surfaces As Detailed Below In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60 Cm And 10 Bg Stiffened With Welded Mild Steel Angle Of Size 25Mm X 25Mm X 3 Mm For Boarding Laid Over Silver Oak Joists Of Size 10Cm X 6.50 Cm Spaced At Abote 90 Cm Centre To Centre And Supported By Casurina Props Of 10Cm To 13 Cm Dia Spaced At Not More Than 75 Cm Centre To Centre Etc. Complete Complying With The Standard Specificaiton. ( Payment For Centering Shall Be Given After The Concrete Is Laid ) 9 For Plane Surfaces Such Asrectangular Or Square Rcc Columns, Sunshades, Top And Bottom Slab Of Rcc Boxing, Etc. 10 For Plane Surfaces Such Asrectangular Or Square Rcc Columns, Sunshades, Top And Bottom Slab Of Rcc Boxing, Etc. 11 Providing And Laying In Position Standardised Concrete Mix M-20 Grade In Accordance With Is 456 - 2000 Using 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cement Contenet Of 325Kg / Cum And Maximum Water Cement Ratio Of 0.55 Including Admixture ( Plasticiser / Super Plasticiser ) In Recommended Proportions As Per Is 9103 To Accelerate, Related Setting Of Concrete, Improve Workability Without Imparing Strength And Durability With About ( 5.0Cum ) , 7730Kg Of 20Mm Machine Crushed Stone Jelly And With About ( 3.3 Cum ) , 5156Kg Of 10 - 12Mm Machine Crushed Stone Jelly And With About ( 4.79Cum ) 7670 Kg Of Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges Centering And Shuttering But Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc And Providing Fixtures Like Fan Clamps In The Rcc Floor / Roof Slabs Wherever Necessary Without Claiming Extra Cost Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers - The Coarse And Fine Aggregates To Be Used Should Comply With The Requiremnents Of Is Staandards. ( No Separate Payment Will Be Made By The Department For The Excess Usage Of Materials ) 12 M-25 Concrete - Providing And Laying In Position, Standarised Design Mix M-25 Grade Using 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cement Content Of 350Kg / M3 And Maximum Water Cement Ratio Of 0.55, Including Admixture ( Plasticiser / Super Plasticiser ) In Recommended Proportions As Per Is:9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability With About ( 5.70 Cu.M. ) 940.50Kg Of 20Mm Machine Crushed Stone Jelly And With About ( 2.80 Cu.M. ) 462.00Kg Of 10-12Mm Machine Crushed Jelly And With About ( 4.25 Cu.M. ) 701.25Kg Of Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc And Providing Fixtures Like Fan Clamps In The Rcc Floor / Roof Slabs Wherever Neccessary Without Clambing Extra, Etc. Complete Complying With Standard Specification And As Directed By The Departmental Officers. The Coarse And Fine Aggregates To Be Used Should Comply With The Requierments Of Is 383-2016. ( No Separate Payment Will Be Made By The Department For The Exces Usage Of Materials As Per Design Mix. ) ( Si No 81 ) 13 Foundation 14 Ground Floor 15 Suppling And Fabricating And Placing In Position Ms ( Or ) R.T.S. Bar For Reinforcement To All Rcc Works As Per The Design Given Including Cost Ofsteel And Binding Wire Also In All Floors. 16 Brick Work In Cm 1:5 ( One Cement & Five Sand ) Using Ii Class Ground Moulded Bricks Of Size 9X43 / 8X 2 3 / 4 Including Finishing, Curing, Etc., Complete Complying With Standard Specification. 17 Ground Floor 18 Brick Partition Walls Using Ii Class Ground Moulded Chamber Bricks Of Size 9X43 / 8X 23 / 4In C.M 1:3Using Hoop Iron Reinforcement, If Found Necessary Standard Specification Including Finishing, Curing, Etc., Complete Complying With Standard Specification - 10 Sqm 19 Plain Cement Concrete 1:2:4 ( One Cement, Two Fine Aggregates And Four Coarse Aggregates ) Using 20Mm Size Iss Hbg Metal Including Cost And Conveyance Of All Materials To Site And Including For The Mixing, Laying And Labour Chargesetc., Complete As Per Standard Specification 20 Plastering With Cement Mortar ( 1:5 ) 12Mm , Thick In All Floors Including Cost And Conveyance Of All Materilas To Site And Labour Charges Etc, Complete As Per Standard Specifications ( S.I.306 ) 21 Plastering With Cement Mortar 1:3, 10 Mm , Thick In All Floors Including Cost And Conveyance Of All Materilas To Site And Labour Charges Etc, Complete As Per Standard Specifications ( S.I.306 ) 22 Painting 2 Coats With Approved Cement Paint Over Cement Plastered Wall Surface, Ceiling And Other New Surface And Including Cleaning, Preparing The Surface And Curing Etc., Complete. 23 Finishing The Top Of Floor With Granolithic Finish With Cc 1: 2: 4 ( One Cement, Two Sand & Four Hbg Jelly ) Using Chips Of Grade 10 Mm Andbelow For 25Mm Thickness And Rubbed Smooth Etc, Complete As Per Standard Specification. 24 Paving The Floor With Design Rajasthankotta Tiles ( Colour And Shade As Directed ) Of Size 610 Mm X 610Mm X 20Mm In All Floors Over A Base Layer Of Cement Mortar 1:3 ( One Cement And Three Sand ) 20Mm Thick Laid In-Situ And Pointed With Same Coloured Cement Etc, Complete As Per Standard Specification 25 Supplying And Fixing In Position Cement Basedhydrualically Pressed Anti-Skid Tiles ( Pattern Design ) 20 Mmthick In Cement Mortar 1:3 - 20Mm Thick & Pointedwith Same Colour Of Cement Etc., Complete As Per Standard Specification 26 Dadooing Walls Withglazed Tiles Of Sizes 305Mm X200mm X 6Mm Size Of Approved Make And Quality And Colour L Set In Cement Mortar 1:2 ( One Cement , Two Sand ) Over 10 Mm Base Layer Plastering And Pointing With White Cement Neatly As Directed. 27 Supplying & Fixingdoor Shutters For Mediun Density Fiber Board Of Exterior Grade 35 Mm Thick, Single Leaf Conforming To Is:12406 / 1989 With 35X12 Mm T.W.Lipping On All Edges With Necessary Adhesives And Cp Screws Complying With Standard Specifications. The Rate Is Inclusive Ofthreee Coats Of Best Quality Varnish But Excluding Cost Of Furniture Fittings.Such As 300 Mm Tower Bolt 2Nos, 200Mm Towerbolt I No. 300Mm Aldrop 1 No. Alu Handle Ornamental Type 2 Nos, And 1 No. Door Stopper Etc Complete. 28 Supply And Fixing Of Pvc Solid Doors Using 19Gauge 19Mm Ms Sq, Tubes For Styles And Frames, 15Mm Ms Sq.Tubes For To, Lock And Bottom Rails. The Steel Tubes Shall Be Covered With 5Mm Thick Solid Pvc Sheets. Shutter Using 5Mm Thick Solid Pvc Sheets For Panelling Shall Rigidly Fixed In Positionincluding Furniture And Fittings. The Over All Size Of Styles Shall Be 50Mm X 30Mm. The Over All Size Of Top Rail, Lock Rail And Bottom Rail Shall Be 75Mm X 30Mm. The Over All Size Of Frames Shall Be 50Mm X 45Mm With Suitable Tabate For Housing The Shutter Etc, Complete As Per Standard Specification. Pwd Sor Pg. No. 48 29 Upvc Ventilatorspecification: Supplying And Fixing Upvc ( Un-Plasticized Polyvinyl Chloride ) Louvered Ventilators Of From The Profile The Size Of Outer Frame 60Mm X 58Mm And Shutter Profile Size Of 60 X 78Mm Both Profiles Are Reinforced With Gi / 1Mm 125Gsm And 100% Corrosion Free, The Profile Are Multi Chambered Sections With Wall Thick Of 2Mm. The Epdm Rubber ( Black Colour ) Covered With All Over The Edges Of Frame And Shutter. The Corners And Joints Should Be Welded And Cleaned. Radiations Pin Headed Glass 4Mm Thick Should Be Provided In The Louvers. The Window Should Be Fixed To The Wall With 100% Packing With Screws And Silicon Packing All Round The Frames. The Ventilator Should Be Got Approved From The Executive Engineer Before Use On Work Pwd Sor Pg. No. 66 30 Upvc Windowspecification: Supplying And Fixing Upvc ( Un-Plasticized Polyvinyl Chloride ) Windows Of Casement Type ( Open ) From The Profile The Size Of Outer Frame 60Mm X 58Mm And Shutter Profile Are Reinforcement With Gi / 1Mm 125Gsm And 100% Corrosion Free, The Profiles Are Multi Chambered Sections With Wall Thick Of 2Mm. The Epdm Rubber ( Black Colour ) Covered With Over All The Edges Of Frame And Shutter The Shutter Will Be Provided With Espag Multi Power Point Locks And Also It Operates As Handle. The Corners And Joints Should Be Welded And Cleaned. Radiations Free Pin Headed Plain Or Brown Colour Glass 4Mm Thick Should Be Provided To The Shutter And It Should Not Allow Leakage Of Water Even At Most Ranging Storms And Should Have Key Lockable Action, Security Protective Hinges, Strong Locking Systems And As Per Size For Arresting Noise And Energy Loss. The Connecting Mechanism Between Sash And Outer Frame That Enables Opening Of The Window. The Window Should Be Fixed To The Wall With 100% Packing With Screws And Silicon Packing All Round The Frames. The Window Should Be Got Approved From The Executive Engineer Before Use On Work ( Pwd Sor Pg. No. 65 ) 31 Finishing The Top Of Roof With One Course Of Machine Pressed Tiles Of Size 200 Mm X 200 Mm X 20 Mm Of Approved Quality In Cement Mortar 1:3 ( One Cement Add Three Sand ) 12 Mm Thick Mixed With Water Proofing Compound Conforming To Iss At 2% By Weight Of Cement Used And The Joints Pointed Neatly To Full Depth Of Tiles With The Same Cement Mortar Mixed With Red Oxide And Water Proofing Compound Including Curing Etc., Complete 32 Weathering Course With Concrete Broken Brick ( S.I.No.278 ) & ( P & D ) Data 54.Jelly 20Mm Gauge In Pure Slaked Lime ( No Sand To Be Added ) Over Roof Slab, The Proportion Of Brick Jelly To Lime Being 32 To 12.5 Well Beated With Wooden Beaters For Giving Required Slope And Thickness As Directed By The Departmental Officers Etc., Complete.-10 Cum 33 Manufacturing, Supplying And Fixing Of Stainless Steel Hand Rails For Staircase Near Wet Riser Using 50Mm Dia 304L Grade Stainless Steel Pipe Of 1.60Mm Thick Will Be Provided With Tubular Supports Made Of 304L Grade Stainless Steel Pipe Of 25Mm Dia Of 1.60Mm Thick Welded To The Railing. The Supports Will Be Grouted Into The Wall And Provided With 93.00Mm Thick Stainless Steel Circular Base Plate Of 304 Grade. The Rate Shall Included For Grouting Into Concrete With Necessary Supporting Arrangements The Hand Rail In Floor Polishing Buffing, Bonding, Cutting, Grinding, Conveyance, Welding Charges, Electrical Charges, Etc. Complete ( Pwd Sor P.No :57 ) 34 Supplying, Fabricating, Erecting Structural Steel Work For Roofing Welded Or Bolted Type Using Ms Channels, Angles, Plates And Round Bars Etc. Conforming To Is Specification Including Primer Coating And Enamal Painting As Per Design Given By The Departmental Officers Etc, Complete As Per Standard Specification 35 Supplying And Laying Rubberised Inter Locking Paver Block M40 Grade Providing And Laying Of 83Mm Thick High Strength Type Confirming Is 15658-2006 Of Rubberised Inter Locking Paver Block Insize Of Minimum Compressive Strength Of 40N / Mm2 In Uniform Shape Of Approved Make To Be Laid In Flurring Bone Pattern With Stone Dust Cushion Below The Uniform Shap Of Approvednon Skitting Surface In The Top And The Rate Including Levelling The Base Preparation Ofpavers As Sub Base, Stone Dust Cushion 150Mm Thick Layingout Of Pavement Cut The Pieces To Fix The Edge Vibring The Pavers, Sweeping Tranporting Loading Unloading Of Laying Paver Block As Per Standard Specification, . 36 Providing And Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam ( Wmm ) Specification Including Premixing The Material With Water At Omc In Mechanical Mix Plant Carriage To Mixed Material By Tipper To Site Laying In Uniform Layers With Paver In Sub Base / Base Course On Well Prepared Surface And Compacting With Vibratory Roller To Achive The Desired Density Complete As Per Clasue 406 Of Morth Specifications. 37 Fabricating Supplying And Fixing Of Galvalume Colour Sheet Of Size 0.47Mmwith The Following Specification. The Materials Should Be Of Ppgi Tile Profile With A Red Colour Or Any Other Approved Design 0.47 Mm Thick 24 Guage Having Width 1050 Mm. The Sheet Should Be G.I.Base Pre Painted Hot Dipped Galvanized Iron Sheet And To Be Fixed With Shelf Tapping Screws, Plastic Washer.The Washer And Screws To Be Fixed By Using Minute Power Machine Drilled With Out Damaging The Sheets Paint Coating To Be Regular Modified Polyster Coat With Zinc Coating Of Z 120 Gsm Paint Thickness The Finish Should Be Terra Cotta Finish Like Malabar Mangalore Tiles Finish Optional Matt Finish. The Sheet To Be Fixed With Making Suitable Corrugated, Cutting The Sheet In To The Required Ssize And Making Ornamental Designs As Per The Site Condition And As Directed By The Departmental Officers. 38 Providing & Fixing Pvc Rain Water Down Fall Pipe Of The Following Dia With Necessary T.W.Clamps Plugs, Shoes, Bemds, Other Clamps, Screws Nails Etc., Complete Complying With Standard Specification. The Rate Is Inclusive Of Cost Of Removable Iron Gratings Of Appropriate Size. The Size Of Teak Wood Plugs Used Is 150X25mm In Front & 200X75mm In Rear ( Wall Side ) With A Depth Of 110Mm. The Pipe Is To Be Fixed By Means Of U Clamps At The Centre Of Pipes To Be Fixed.110Mm Dia Pvc Pipe [ 4 Kg / Sqcm ] ( D ) 39 Supplying And Fixing Of 1000 Litters Capacity Pvc Tank Of Approved Quality Including Cost Of All Materials Like Tank Fittings, Lead .Lift, Errection Etc Complete. Pwd Sor Pgno:91 40 Supplying And Fixing In Position First Quality And Approved Variety Of Gun Metal Gate Valve ( Heavy Type ) With I.S.I.Mark Of The Following Sizes Including Cost Of Shellac , Thread Etc, .Including Labour For Cutting And Threading Of G.I.Pipes Etc., Complete Complying With Standard Specifications For Both Internal And External Water Supply Arrangements. ( D ) 41 25Mm Gun Metal Valve 42 32Mm Gun Metal Valve 43 Suppling And Fixing In Position15mm.Diameter Brass / C.P Screw Down Tap / Pillar Tap ( Heavy Duty ) Of Approved Make Conforming To I.S.Specifications And Quality Including Cost Of Shellac, Thread Etc.Complying With Standard Specifications And Including Cutting And Threading Wherever Necessary ( D ) 44 Sd Tap 45 Pillar Tap 46 P.V.C. Pipes ( 10Kg / Sqcm ) Supplying Laying And Jointing P.V.C Pipes ( 10Kg / Sqcm ) Of Approved Quality And Best Variety Conforming To I.S.S & With I.S.I Mark, Of The Following Sizes Including Cutting , Fixing To Pvc Specials Using Adhesive But Excluding Cost Of Such Specials And Fixing To Wall With Necessary Teak - Wood Plugs, Pvc Clamps And Screws, Making Holes On The Wall Or Drilling Holes In Roof And Making Good The Dismantled Portions To Original Condition With Necessary Brick Work And Plastering Wherever Necessary With Necessaryscaffolding Charges. ( D ) 47 20Mm Dia Pipe 48 25Mm Dia Pipe 49 Supplying Pvc Specials ( With Working Pressure 10 Kg. / Sq.Cm. ) In Water Supply Arrangements ( Both In Internal And External Water Supply Arrangements Pwd Sor Pg.No:99 Si.No:367 50 Coupler 51 25Mm Dia 52 32Mm Dia 53 Elbow 54 25Mm Dia 55 32Mm Dia 56 Bend 57 25Mm Dia 58 32Mm Dia 59 Tee 60 25Mm Dia 61 32Mm Dia 62 End Cap 63 25Mm Dia 64 32Mm Dia 65 Reducer 66 25 Mm X 20 Mm 67 32 Mm X 25 Mm 68 Reducer Tee 69 25 Mm X 20 Mm 70 32 Mm X 25 Mm 71 Reducer Elbow 72 25 Mm X 20 Mm 73 32 Mm X 25 Mm 74 Jet Nipple 75 25Mm Dia 76 32Mm Dia 77 Supplying And Fixing In Position Pvc Specials Of The Following Dia And Types Of Approved Quality Confirming To Bis And Providing Leak Proof Joints Including Fixing To The Walls And Giving Connection To The Pvc Soil Stacks, Dismantling The Masonry Or Rcc Works And Re-Doing The Dismantled Portion To Original Condition Etc., Complete Complying With Standard Specifications. ( The Pvc Specials Should Be Got Approved By The Executive Engineer Before Use On Works ) . ( D ) 78 Pvc Elbow 79 110Mm Dia 80 Pvc Elbow With Door 81 110Mm Dia 82 Pvc Tee 83 110Mm Dia 84 Pvc Tee With Single Door 85 110Mm Dia 86 Supplying And Fixing In Position Best Quality Approved Make White Glazed Earthenware Wash Hand Basin Of Size 550 X 400 Mm With A Pair Of Cast Iron Brackets, Including Cost Of 15Mm Diametre Brass Chromium Plated Piller Tape, 32 Mm Diametre C.P. Waste Union, 32 Mm Diametre P.V.C. Waste Pipe With Rubber Plug And Chain, 15Mm Diametre G.M.Wheel Valve, 15Mm Dia Brass Nipple, 15Mm Dia Nylon Connections Etc., Including Fixing The Wash Hand Basin In The Wall In Position With A Pair Of C.I. Brackets With Teak Wood Plugs And Screws And Giving Necessary Water Supply Connection And Paintiung The Brackets With Two Coats Of Paint Over A Primimg Coat Of Anticorrosive Paint Including Testing For Leackage Etc., Complete Complying With Standard Specifications ( D ) 87 Supplying And Fixing In Position Indian Water Closet Of Size 580 X 440Mm, White Glazed Earthen Ware Of Approved Quality With P Trap Or S Trap Confirming To Is:2556 -Part Xii With Sand Cushion And Forming Flooring Alround The Closet Using 40Mm Broken Brick Jelly In Lime Concrete1:2:5 ( One Part Of Lime, Two Parts Of Sand And Five Parts Of Brick Jelly ) 100Mm Thick And Finishing The Top To Required Slope And Including Giving Necessary Connection To Cast Iron Soil Pipes / Pvc Pipes By Dismandling Brick Masonry, Reinforced Cement Concrete Roof / Floor Slab And Making Good The Disturbed Portion To Original Condition Without Leakage Etc., Complete Complying With Standard Specifications And As Directed By The Departmental Officers. 88 S / F In Position Of Indian Make White / Colour Glazed Earthen Ware Lipped Mouth Flat Back Urinal Of Best Approved Quality With G.I.Pipe Connection To Suitable Length, 32Mm Bell Mouthed P.V.C Connection , 15Mm Dia G.M.Wheel Valve, Fixing The Urinal To The Wall In Positionwith Necessary T.W.Plugs , Clamps, Screws, Shellac Etc., Including Dismantling Masonry If Necessary And Redoing The Same To Original Condition , Fixing The 15Mm Dia. G.I.Pipe Connection And Wheel Valve , Painting The Pipe With Two Coats Of Approved Paint Over One Coat Of Primer And Checked Without Any Leakage Complete, Complying With Standard Specifications. - White Colour 89 Supplying And Erecting In Position Of 250 Liters Capacity Industrial Model Reverse Osmosis Water-Cum-Purifier Todeliver Potable Water With World Health Organisation ( Who ) Standards With Following Accessories. ( A ) Ms Skid - 1 No. ( B ) Media 11054 No. Vessel With 20 Nb Multiport Valve ( Withmedia Pubble And Fine Sand And Activated Carbon Filling ) Set ( C ) Feed Pump 0.50 Hp – 1 No. ( D ) Vertical Pump 2-9, 2.00 Hp / Single Phase – 1 No. ( E ) Membrane 40 X 40 Filmtech ( Or ) Equilaents / Osmonic ( Usa ) - 1 No. And Membrane Pressure Vessel 40 X 40 -1 No.& Pressure Gauge - 2 Nos. ( F ) Flow Meter - 1 No. 20” Filter With Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary Cpvc Pipes And Fittings. The System Shall Be Provide With Two Panel Control System With Necessary Stainless Valves And Fittings And Float Control Etc. The Rate Should Be Inclusive Of All Civil Works, Wherever Necessary To Install The System In Position And Intact ( 250Lts ) ( Pwd Sor Pg No 72 ) 90 Supplying And Fixing In Position White Glazed European Water Closet Of Best Quality And Approved Make With 100Mm P Os S Trap With Double Flapped Rigit P.V.C. Seat Cover With C.P. Brass Hinges With 12.5 Litres Pvc Low Level Flushing Tank With All Internal Fittings Etc., Complete Complying With Standard Spoecifications, Labor Inclusive Of Fixing Lowlevel Flushing Tank. 91 White Ewc 92 Supply And Fixing Of Pvc. Nahini / Floor Trap With Stainless Steel Gratings- 100 Mm X 75 Mm Including All Charges Etc, Complete As Per Standard Specification. ( D ) 93 Supply And Fixng Of Tneb Meter Board Suitable For 3 Phase 100A Service Connection Made Up Of Suitable Angle Iron Frame Work Of Size 2 Feet X 1-1 / 2 Feet Using Angle Iron Of Size 1-1 / 2 X 1-1 / 2 X 1 / 4 Rigidly Fixed On Wall Covered With Hylem Sheet Of Size 2 Feet X 1-1 / 2 Feet Of 12Mm Thickness With Necessary Bolts And Nuts Supports And Supply And Fixing Of 3 Nos. 100A Fuse Units ( 500V ) , 1 No. Neutral Link, Copper Earth Flat Of Size 1 X 1 / 4 With Inter Connection Of Eb Meter To Fuse Units By 16 Sq.Mm Pvc Insulated Copper Wire With Earth Connection Complet ( Sd 130 ) 94 Supply And Laying Of 3.5 X 25 Sq.Mm Pvc Armoured Ltug Cable In A Trench To Be Excavated At A Depth Of 0.75 Metre Putting 0.15 Metre Layer Of Sand And Covering The Cable Completely With Bricks And Sand And Refilling The Earth To Make Good 95 Wiring With 2 X 1.5 Sq.Mm. ( 22 / 0.3 ) Pvc Insulated Sc Unsheathed Copper Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories And With Tw Switch Box And 5A Ft Switch With Painting Of Suitable Colour For Open Pvc Light Point / Fan Point ( For Electronic Regulator ) ( 4 Points Per Coil ) ( Sd 17 ) 96 Upply And Fixing Of 5A / 15A 3 Pin Combined Flush Type Wall Socket With 15A Flush Type Switch Concealed In Suitable Ms Box In Flush With Wall And Covered With 3Mm Thick Hylem Sheet ( Sd 138 ) 97 Earthing As Per The Isi Specification With An Earth Electrode Of 2.10 Metre Class B Gi Pipe Of Dia Not Less Than 40Mm With Copper Earth Plate Of Size 125Mm X 50Mm X 6Mm With Necessary Funneling Arrangements With Necessary Masonry Work And With 38Mm Rcc Cover Slab For The Brick Masonry ( Sd 233 ) 98 Supply And Fixing Of 18W 4 Feet Led Fitting With Led Light Fitting Complete With Tw Round Blocks On Ceiling With Pvc Unsheathed Copper Leads From Terminals To The Fitting ( Sor Page No.114 ) 99 Supplying And Erectingof 12 Mtrs.Mini Mast Tower Polygonal Shapes. Suitable For 12 Luminaries For Wind Speed Up To 180 Km / Hr. As Per Is -875 Parts -3 Material Cons.: Bsen 10025 # Mechanical Components Including Head Frame & Pulley Assay, Winch Bracket, Lantern Carriage Ring, Luminaries And C.G Box Mtg. Arms, Resting Bracket Guide Ring, Compensating Disc, Lightening Arrestor.Etc. ( Each Set ) # Wire Rope, Safety Wire Rope, D Suckle Clamps, Nuts And Bolts. # Cable With Termination & Distribution Box. # Foundation Accessories. # Winch Assembly # Power Tool. Mast Bottom Dia:415 Mm. Top : 150 Mm, Thk: 4, 3, 3 Mm. Motor-1.Feeder Pillar Box Comprising 100 Ams Fuse Unit 24 Hours Timer 1-Nos And Contactor 1-Nos Outgoing Mcb Toggle Switch And Neutral Link With Internal Wiring Made Of Ms Sheet And Vermin Proof.Erection And Commissioning Of 20 Mtr High Mast On The Above Said Concrete Foundation Using Suitable Equipments.Fixing Of Flood Light Luminaries In The Lantern Carriage Including Internal Wiring & Using Flexible Copper Cable Complete. Halonix Led Flood Light 150W ( Cw ) 12 Nos ( Pwd Sor P.No : 151 )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 4
Tamil Nadu View Result →
30.
Drinking Water Supply and Sanitation #9111854 Technical Bid
Tender For Construction Of Weekly Market At Paramakudi Municipality; 1 Earth Work Excavation For Foundation In All Kinds Of Soils And Sub Soils To Full Depth As Directed By The Departmental Officers Except Hard Rockinclusive Of Shoring Strutting And Balling Out Water Wherever Necessary And Refilling The Sides Of Foundation With Excavated Earth In Layers Of 15Cm Thick Well Rammed And Consolidated And Depositing The Surplus Earth With In The Compound In Places Shown By The Departmental Officers With Initial Lead Of 10 Meters And Initial Lift Of 2 Meters Including Cost Of All Labour Charges Etc., Complete As Per Standard Specification 23 & 24Vi ( S2 ) Vii.9, 10 2 Footings ( First 2M Depth ) 3 Footings ( 2 To 3M Depth ) 4 Grade Beam 5 Drain 6 Supplying And Filling In Foundation Andbasement With Crushed Stone Dustin Layers Of Not More Than 15Cm Thick Well Rammed Watered And Compacted Etc., Complete Complying With Standard Specification. 7 Plain Cement Concrete 1 : 4 : 8 ( One Cement, Four Sand And Eight Aggregates ) Using 20Mm And 40Mm Of 1 / 3 Part And 2 / 3 Part Respectively Iss Hbg Metal Including Cost And Conveyance Of All Materials And Labour Charges For Mixing, Laying, Compactingand Curing Etc, Complete 8 Providing Through Vertical Joint With 12Mm Space Filled With Bitumenous Compound Running From Bottom Of Foundation Upto The Top Of Parapet Wall As Directed- 10 M2 9 Providing And Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam ( Wmm ) Specification Including Premixing The Material With Water At Omc In Mechanical Mix Plant Carriage To Mixed Material By Tipper To Site Laying In Uniform Layers With Paver In Sub Base / Base Course On Well Prepared Surface And Compacting With Vibratory Roller To Achive The Desired Density Complete As Per Clasue 406 Of Morth Specifications. 10 Providing Granolithic Floor Finish Of 25Mm Thickness With Plain Cement Concrete 1:2:4 ( One Cement, Two Crushed Sand ( M-Sand ) And Four Aggregate ) Using 10 To 12Mm Gauge Hard Broken Stone Jelly Including Laying, Finishing And The Top Rubbed Smooth With Power Trawl, Thread Lining, Curing Etc. Complete Complying With Standard Specification And As Directed By The Departmental Officers. ( The Rate Is Inclusive Of Necessary Planking For Panellingwherever Necessary And As Directed By The Departmental Officers ) 11 Supplying And Erecting Centering To Sides And Soffits Including Supports And Strutting With Necessary Cross Bracing For Plain Surface Such As Rcc Slabs Rectangular Beams All Beams Lintels Etc. Centering For Soffits Of Rcc Slabs Plain Surface Including Strutting Upto 3.29 Meter Height Using Mild Steel Of Size 90 Cm X 60 Cm X 10 Gauge With Ms Angles Of Size 25 Mm X 2 Mm X 3 Mm Laid Over Silver Oak ( Cw ) Joists Of Size 10 Cm X 6 Cm Spaced Upto 90 Cm C / C And Supported Casurina Props Or 10 Cm To 13 Cm Dia Spaced At 0.750 Cm C / C Complying With Standard Specification And As Directed By The Departmental Officer 12 Footing & Grade Beam 13 Column 14 Beam & Slab 15 Rcc Wall 16 Providing And Laying In Position Standardised Concrete Mix M-20 Grade In Accordance With Is 456 - 2000 Using 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cement Contenet Of 325Kg / Cum And Maximum Water Cement Ratio Of 0.55 Including Admixture ( Plasticiser / Super Plasticiser ) In Recommended Proportions As Per Is 9103 To Accelerate, Related Setting Of Concrete, Improve Workability Without Imparing Strength And Durability With About ( 5.0Cum ) , 7730Kg Of 20Mm Machine Crushed Stone Jelly And With About ( 3.3 Cum ) , 5156Kg Of 10 - 12Mm Machine Crushed Stone Jelly And With About ( 4.79Cum ) 7670 Kg Of Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges Centering And Shuttering But Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc And Providing Fixtures Like Fan Clamps In The Rcc Floor / Roof Slabs Wherever Necessary Without Claiming Extra Cost Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers - The Coarse And Fine Aggregates To Be Used Should Comply With The Requiremnents Of Is Staandards. ( No Separate Payment Will Be Made By The Department For The Excess Usage Of Materials ) 17 Below Basement Lvl 18 Bove Basement Lvl 19 Providing And Laying In Position Standardised Concrete Mix M-25 Grade In Accordance With Is 456 - 2000 Using 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cement Contenet Of 350Kg / Cum And Maximum Water Cement Ratio Of 0.55 Including Admixture ( Plasticiser / Super Plasticiser ) In Recommended Proportions As Per Is 9103 To Accelerate, Related Setting Of Concrete, Improve Workability Without Imparing Strength And Durability With About ( 5.0Cum ) , 7730Kg Of 20Mm Machine Crushed Stone Jelly And With About ( 3.3 Cum ) , 5156Kg Of 10 - 12Mm Machine Crushed Stone Jelly And With About ( 4.79Cum ) 7670 Kg Of Crushed Stone Sand ( M- Sand ) But Excluding Cost Of Reinforcement Grill And Fabricating Charges Centering And Shuttering But Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc And Providing Fixtures Like Fan Clamps In The Rcc Floor / Roof Slabs Wherever Necessary Without Claiming Extra Cost Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers - The Coarse And Fine Aggregates To Be Used Should Comply With The Requiremnents Of Is Standards. 20 Below Gl Upto 1.5M Depth 21 Above Gl Upto 6.50M Height 22 Supplying, Fabricating And Placing In Position Of Steel Reinforcement Using Mild Steel Or Ribbed Tor Steel Rods, For All Rcc Worksas Per The Design Given By The Departmental Officers Including Cost Of Steel And Binding Wire And All Labour Charges For Cutting, Bending, Tying And Placing In Position Etc, Complete As Per Ss. 23 Refilling With Excavated Soil ( Other Than Sand ) Complying With Standard Specification For Filling In Foundation And Basement. 24 Brick Work In Cm 1:5 ( One Cement & Five Crushed Stone Sand ( M- Sand ) ) Using Ii Class Ground Moulded Bricks Of Size 9 X 43 / 8X 2 3 / 4 Including Finishing, Curing, Etc., Complete Complying With Standard Specification - 100Cft 25 Ground Floor 26 First Floor 27 Terrace Floor 28 Brick Partition Walls Using Ii Class Ground Moulded Chamber Bricks Of Size 9X43 / 8X 23 / 4In C.M 1:3Using Hoop Iron Reinforcement, If Found Necessary Standard Specification Including Finishing, Curing, Etc., Complete Complying With Standard Specification - 10 Sqm 29 Ground Floor 30 First Floor 31 Paving The Floor With Double Charged Vitrified Tiles Of Approved Quality And Colour Of Size 600X600x8mm Thick Of Approved Make, Quality And Colour In All Floors Over A Base Layer Of Cement Mortar 1:3 ( One Part Of Cement And Three Part Of Plastering Sand ( P- Sand ) ) , 20Mm Thick And Laid Straight Alignment And Pointed Neatly With Colour Cement At The Rate Of 0.40Kg / M2 Laid Without Any Air Gap In The Tiles Neatly And Fixing In Position As Per Standard Specifications And As Directed By The Departmental Officer.The Colour & Quality Of Tiles Should Be Got Approved By Municipal Engineer Before Use On Work 32 Paving The Floor With Design Antiskirt Ceramic Tiles ( Colour And Shade As Directed ) Of Size 305 Mm X 305Mm X 6 Mm In All Floors Over A Base Layer Of Cement Mortar 1:3 ( One Part Of Cement And Three Part Of Plastering Sand ( P- Sand ) ) , 20Mm Thick Laid In-Situ And Pointed With Same Coloured Cement 33 Dadooing Walls Withglazed Tiles Of Sizes 305Mm X 200Mm X 6Mm Size Of Approved Make And Quality And Colour Set In Cement Mortar 1:2 ( One Part Of Cement And Two Part Of Plastering Sand ( P- Sand ) ) Over 10 Mm Base Layer Plastering And Pointing With White Cement Neatly As Directed. 34 Weathering Course With Concrete Broken Brick ( S.I.No.278 ) & ( P & D ) Data 54. Jelly 20Mm Gauge In Pure Slaked Lime ( No Sand To Be Added ) Over Roof Slab, The Proportion Of Brick Jelly To Lime Being 32 To 12.5 Well Beated With Wooden Beatersfor Giving Required Slope And Thickness As Directed Bythe Departmental Officers.Etc., Complete. 35 Finishing The Top Of Roof With One Course Of Machine Pressed Tiles Of Size 200 Mm X 200 Mm X 20 Mm Of Approved Quality In Cement Mortar 1:3 ( One Part Of Cement And Three Part Of Plastering Sand ( P- Sand ) ) , 12 Mm Thick Mixed With Water Proofing Compound Conforming To Iss At 2% By Weight Of Cement Used And The Joints Pointed Neatly To Full Depth Of Tiles With The Same Cement Mortar Mixed With Red Oxide And Water Proofing Compound Including Curing Etc., Complete 36 Special Ceiling Plastering In Cement Mortar 1:3 Mix 10Mm Thick Using Clean Screened Sand And Including Cost Of Curing For Fifteen Days From The Completion Of Thework And Surface Should Free From Undulationsand Including The Cost Of Preparing The Surface For Plastering And Protecting For Plastering For Plastering And Protecting From Other Damages Till Setting Of Mortaretc.Complete Complying With Standard Specification 37 Plastering With Cement Mortar 1:5 ( One Cement And Five Sand ) 12Mm Thick In All Floors Including Cost And Conveyance Of All Materials To Site Etc, Complete As Per Standard Specifications 38 Painting Two Coats For Interior Surface With Approved Interior Plastic Emulsion Paint Approved Quality And Colour Over A Priming Coat, Including Thorough Scrapping, Clean Removal Of Dirt, Etc Complete And Including Necessary Plaster Of Paris, Putty, Wherever Required Etc, Complete As Per Standard Specification. 39 Painting External Wall With Two Coats Of Bestapproved Quality Of Plastice Emultion Paint Over A Including One Coat Ofpriming Of Exterior Emulsion Paint - Water Based Primer ( Liquid ) Primier Over Cementsurface Wall As Dirceted By The Departmental Officersincluding Cleaning Preparing The Surface Etc, Complete Complying With Standard Specification.The Cement Paint Should Be Got Approved By The Departmental Officers Before Use On Work - Exterior 40 Supplying And Filling In Foundation Andbasement With Well Gravel In Layers Of Not More Than 15Cm Thick Well Rammed Watered And Compacted Etc., Complete Complying With Standard Specification. 41 Supplying And Erecting Pull And Push Type Rolling Shutter With Isi Make Of Approved Size And Section Using 18 Gi Sheet. The Shutter Shall Be Painted With One Coat Of Red Oxide Primer And The Rate Is Inclusive Of Hood Covers, Transportation Charges Etc - Manually Operated ( Up To 8 Sqm. Area ) 42 Paintinting Two Coats For New Iron Work Surface Using Best Quality Synthetic Enamel Paint Etc Complete Complying With Standard Specification 43 White Washing Two Coats With Freshly Burnt Shell Lime White In Colour In All Floors Including Cost Of Lime And Other Materials Brushes Scaffolding Charges Etc.Complete Complying With Standard Specification And As Directed. -100Sq.M 44 Providing And Fixing Bitumen Pad For Expansion Joint In Between Pavement Slabs To 12Mm Thick And Fixed As Shown In The Drawing Including Cost And Conveyence Of Expansion Joints Including Shalimar Pad And Joint Sealent Etc, Complete As Per Standard Specification 45 Supplying And Fixing Upvc ( Un-Plasticized Polyvinyl Chloride ) Louvered Ventilators Of From The Profile The Size Of Outer Frame 60Mm X 58Mm And Shutter Profile Size Of 60 X 78Mm Both Profiles Are Reinforced With Gi / 1Mm 125Gsm And 100% Corrosion Free, The Profile Are Multi Chambered Sections With Wall Thick Of 2Mm. The Epdm Rubber ( Black Colour ) Covered With All Over The Edges Of Frame And Shutter. The Corners And Joints Should Be Welded And Cleaned. Radiations Pin Headed Glass 4Mm Thick Should Be Provided In The Louvers. The Window Should Be Fixed To The Wall With 100% Packing With Screws And Silicon Packing All Round The Frames. The Ventilator Should Be Got Approved From The Executive Engineer Before Use On Work 46 Pre-Painted Galvanized Iron Two Track Sliding Window: Providing And Fixing Pre-Painted Two Track, Two Panel Slidingsystem Fabricated From Roll Formed Sections Made Ofgalvanized Steel Powder Coated ( Base Steel As Per Is 513 DQuality, Galvanized As Per Is 277 With Zinc Of 120 Grams / Sqm. ) With Total Coated Thickness Of 0.58Mm. Paint Specification: Coated Sections Should Be With Primer Coat Of Epoxy Primer Of 5-7 Microns Thick, Finish Painted With A Polyester Paint Of 12-16 Microns Thick And Back Coated With Alkyd Backer Of 5-7 Microns. Dimensions Of Sections: Section For Frame Two Track Should Be Of 59Mm X 44Mm, Section For Shutter Should Be Of 35Mm X 49Mm For Window, Section For Euro Groove Should Be Of 25Mm X 24Mm And For Lap Strip Should Be 30Mm X 41Mm. Fixing Details: The Frame And Shutter Sections Should Be Cut To Length, Joined With Corner Brackets Made Of Glass Filled Nylon. Ethyl Propylene Diamine Monomer ( Epdm ) Gasket Should Be Used All Around Glass. Accessories: Corner Brackets Made Of Glass Filled Nylon Gasket Made Of Ethyl Propylene Diamine Monomer ( Epdm ) . Locking System Should Be Of Single Pin Locking For Windows. Single Wheel Rollers For Windows Should Be Provided. Glass: Glass Shutter And Fixed Glass Portion Should Be Provided With A Glass Of 4Mm Pinhead Glass. Window Frame Should Be Fixed To Brick / Concrete Masonry By Using Nylon Self-Expanding Caps And Driving Ms Electro Plated 80Mm Long Screws Into The Caps Through Frames. 47 Manufacturing, Supplying And Fixing Of Stainless Steel Hand Rails For Staircase Using 50Mm Dia 304L Grade Stainless Steel Pipe Of 1.60Mm Thick At Required Locations To A Height Of 900Mm From Finished Floor Level Welded To 38Mm Dia Stainless Steel Pipe Post Of 1.00Mm Thick As Vertical At 900Mm Centre With 2 Nos. Of 25Mm Dia Intermediate Horizontal Stainless Steel Pipe Of 1.60Mm Thick In Between. The Vertical Pipe Has To Be Welded To The 100 X 100 X 6Mm Ms Base Plate Encased In The Base Concrete. The Rate Is Inclusive Of The Charges For Cutting, Bending, Welding, Grinding, Polishing, Conveyance, Electrical Charges, Etc. Complete 48 Manhole Cover Sfrc 900X900mm 49 Supplying & Fixing Ms Grills For Gate & Door 50 Supply And Providing 1000 Litres Capacity Priming Tank Madeup Of Pvc. Make: Sintex / Equivalent 51 Solid Pvc Door Shutters Using 19 Gauge 19Mm Ms Square Tubes For Styles And Outer Frames. 15Mm Ms Square Tubes For Top, Lock And Bottom Rails. The Steel Tubes Shall Be Covered With 5Mm Thick Solid Pvc Sheets. Shutter Using 5Mm Thick Solid Pvc Sheets For Panelling Shall Rigidly Fixed In Position Including Necessary Furniture And Fittings. The Over All Size Of Styles Shall Be 50Mm X 30Mm. The Over All Size Of Top Rail, Lock Rail And Bottom Rail Shall Be 75Mm X 30Mm. The Over All Size Of Frames Shall Be 50Mm X 45Mm With Suitable Rabate For Housing The Shutter 52 Providing Upvc ( Un-Plasticized Polyvinyl Chloride ) Door:Providing And Fixing Casement Doors Fabricated From Un Plasticized Polyvinyl Chloride ( Upvc ) Sections. Profiles: The Profiles Should Be Three Chamber System Which Provides High Insulation Properties With Outer Frame 60Mm X 55Mm With An Outer Wall Thickness Of 2.4Mm. The Window Unit Should Be Designed With All Corner Joints Mitred And Fusion Welded. Windows Should Be Steel Reinforced With 25 X 24 X 25Mm Steel Reinforcement With A Thickness Of 1Mm To Have Dimensional Stability. The Sash Should Be Of 60 X 102Mm. The Mullion Should Be Of 60 X 74Mm. The Profiles Should Have Co-Extruded Seals. Hardware: All The Hardware Like Friction Stays, Handles Should Be Screwed With Self Tapping Screws. The Handles, Lock Should Be Designed So That They Cannot Be Released From Outside. Glazing: The Window System Should Be Glazed With 5Mm Plain Float Glass / 6Mm Bison Lam Installation: The Profiles Should Be Cut To Length And Welded 45 Degrees. The Window Should Be Designed Such That The Water Drainage Does Not Pass Through The Reinforcement Chamber. The Window System Should Be Fixed Directly To The Plastered Brick Wall Using Self Expanding Nylon 53 Supplying, Fabricating, Erecting Structural Steel Work For Roofing Welded Or Bolted Type Using Ms Channels, Angles, Plates And Round Bars Etc. Conforming To Is Specification Including Primer Coating And Enamal Painting As Per Design Given By The Departmental Officers Etc, Complete As Per Standard Specification 54 Fabricating Supplying And Fixing Of Pre Painted Galvanium Colour Sheets With The Following Specification. The Materials Should Be Of Ppgi Tile Profile With A Red Colour Or Any Other Approved Design 0.47 Mm Thick 24 Guage Having Width 1050 Mm. The Sheet Should Be G.I.Base Pre Painted Hot Dipped Galvanized Iron Sheet And To Be Fixed With Shelf Tapping Screws, Plastic Washer.The Washer And Screws To Be Fixed By Using Minute Power Machine Drilled With Out Damaging The Sheets Paint Coating To Be Regular Modified Polyster Coat With Zinc Coating Of Z 120 Gsm Paint Thickness The Finish Should Be Terra Cotta Finish Like Malabar Mangalore Tiles Finish Optional Matt Finish. The Sheet To Be Fixed With Making Suitable Corrugated, Cutting The Sheet In To The Required Ssize And Making Ornamental Designs As Per The Site Condition And As Directed By The Departmental Officers. 55 Fabricating Supplying And Fixing Of Roof With Poly Carbonate Sheet Of 6Mm Thcik With Any Colour Or Any Other Approved Design And To Be Fixed With Shelf Tapping Screws, Plastic Washer. The Washer And Screws To Be Fixed By Using Minute Power Machine Drilled With Out Damaging The Sheets. The Sheet To Be Fixed With Making Suitable Corrugated, Cutting The Sheet In To The Required Ssize And Making Ornamental Designs As Per The Site Condition And As Directed By The Departmental Officers. 56 Supplying And Laying Rubberised Interlocking Paver Blockm40 Grade Providing And Laying Of83mmthick High Strength Type Conforming Is 15658-2006 Of Rubberized Interlocking Paver Lock In Size Of Minimum Compressive Strength Of 40N / Mm2 In Uniform Shape Of Approved Make To Be Laid In Flurring Bone Pattern With Sand Cushion Below The Uniform Shap Of Approvednon Skitting Surface In The Top And The Rate Including Levelling The Base Preparation Ofpavers As Sub Base, Sand Cushion 150Mm Thick Layingout Of Pavement Cut The Pieces To Fix The Edge Vibring The Pavers, Sweeping Tranporting Loading Unloading Of Laying Paver Block As Per Standard Specification, . 57 Wiring With 2 X 1.5 Sq.Mm. ( 22 / 0.3 ) Pvc Insulated Unsheathed Sc Copper Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe Concealed In Wall And Ceiling With Pvc Accessoires With Tw Switch Box And 5A Ft Switch In Flush With Wall With 3Mm Thick Hylum Sheet Cover For Making Good Of The Concealed Portion With Suitable Colour For Pvcconcealed Light Point / Fan Point ( For Electronic Regulator ) 58 Wiring With 2 X 1.5 Sq.Mm. ( 22 / 0.3 ) Pvc Insulated Sc Unsheathed Copper Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe Concealed In Wall And Ceiling With Pvc Accessories In Flush With Wall With 150Mm X 100Mm X 113Mm Tw Switch Box With 3Mm Thick Hylem Sheet Cover For 5A 3 Pin Non Inter Locking Wall Socket With 5A Flush Type Switch With Continuous Earth Wire Connection Of 14 Swg Tc Wire And Making Good Of The Concealed Portion With Suitable Colour For Concealed Pvc Plug Point Sd 36 59 Supply And Fixing Of Single Box Type 440W Fluorescent Fitting Complete With Copper Choke And Condensor With Conduit Pipe Suspension From The Ceiling With Pvc Unsheathed Copper Leads From Terminals To The Fitting With Tube 60 Supply And Fixing Of Fancy Glass Shade And 40W Bulb For Bh Point 61 4 Way / 8 Way / 12 Way Vertical Spmcb Sheet Steel Distribution Boards Flush Type / Surface Type Fitted With Bus Bars And Neutral Links With Single Phase Mcb Outgoings And Separate 2 Way Provision For Accommodating One No. 2 Pole Incoming Mcb / Isolator And Another Separate 2 Way Provision For Accommodating One No. 2 Pole Elcb / Rcd With Label Holder And Provisions For Taking Up Cable For Size Not Less Than 35 Sq.Mm. 62 Supply And Fixing Of 65Mm ( 2-1 / 2 ) Gi Pipe ( Class B ) Of 6 Metre Length With 300Mm X 300Mm X 6Mm Ms Base Plate Duly Welded At The Bottom With Concreting With Construction Of Masonary Pedestal With Suitable Ms Box To House 5A Control Switch 16A Fuse Unit ( 500V ) Etc With Suitable Angle Iron Frame Work With Door And With Lock And Key Arrangements And With Supply And Fixing Of 440W Twin Street Light Fluorescent Fitting With Copper Chokes And Condenser With Fluorescent Tubes With 1 Metre Of 32Mm Dia Gi Pipe ( Class B ) Complete With Necessary Clamps On The Above Post With Pvc Unsheathed Leads With Painting Of Suitable Colour Sd101 63 Street Light Cable - 3-1 / 2 X 120 Sq.Mm. Pvc Ltug Armoured Cable 64 Supply And Fixing Of 1200Mm ( 48 ) Sweep Ac Ceiling Fan Complete ( Higher End ) With 2 Module 100W Fan Step Regulator ( Higher End ) With 1 Metre Down Rod With Fan Clamp With Side Plates And Cross Arm Of Size450mm ( 18 ) 65 Internal Water Supply & Sanitary Arrangement - P.V.C. Pipes ( 10Kg / Sqcm & 6 Kg / Sqcm ) Supplying Laying And Jointing P.V.C Pipes ( 10Kg / Sqcm & 6 Kg / Sqcm ) Of Approved Quality And Best Variety Conforming To I.S.S & With I.S.I Mark, Of The Following Sizes Including Cutting , Fixing To Pvc Specials Using Adhesive But Excluding Cost Of Such Specials And Fixing To Wall With Necessary Teak - Wood Plugs, Pvc Clamps And Screws, Making Holes On The Wall Or Drilling Holes In Roof And Making Good The Dismantled Portions To Original Condition With Necessary Brick Work And Plastering Wherever Necessary With Necessaryscaffolding Charges. 66 50Mm Dia Pipe 67 25Mm Dia Pipe 68 20Mm Dia Pipe 69 110Mm Dia 70 75Mm Dia Pipe 71 Providing & Fixing Pvc Rain Water Downfall Pipe Of The Following Dia With Necessary T.W.Clamps Plugs, Shoes, Bemds, Other Clamps, Screws Nails Etc., Complete Complying With Standard Specification. The Rate Is Inclusive Of Cost Of Removable Iron Gratings Of Appropriate Size. The Size Of Teak Wood Plugs Used Is 150X25mm In Front & 200X75mm In Rear ( Wall Side ) With A Depth Of 110Mm. The Pipe Is To Be Fixed By Means Of U Clamps At The Centre Of Pipes To Be Fixed.110Mm Dia Pvc Pipe [ 4 Kg / Sqcm ] 72 Pvc Specials 73 25X20mm Reducer 74 Pvc Elbow 75 75Mm Dia 76 110Mm Dia 77 Pvc Tee 78 110Mm Dia 79 75Mm Dia 80 Supplying And Fixing In Position First Quality And Approved Variety Of Gun Metal Gate Valve ( Heavy Type ) With I.S.I.Mark Of The Following Sizes Including Cost Of Shellac , Thread Etc, .Including Labour For Cutting And Threading Of Pvc Pipes Etc., Complete Complying With Standard Specifications For Both Internal And External Water Supply Arrangements. 81 Inlet Valve - 32Mm Dia 82 25Mm Dia 83 Supplying And Fixing In Position White / Colour Glazed Model Floor Mounted European Water Closet Of Best Quality And Approved Make With 100Mm “P” Or “S” Trap Connecting With Ci Pipe Of 100Mm Dia / Pvc Pipe Of 110Mm Dia, Double Flapped Rigid Pvc Black Seat And Seat Cover With Cp Brass Hinges Including Cost Of White Cement, Cement For Packing, Spun Yarn, Teak Wood Plugs, Brass Screws, Etc., Including Supplying And Fixing 10 Litres Capacity Pvc / 12.5 Litres Capacity Porcelin Low Level Flushing Tank With A Pair Of Ci Brackets, Etc., Complete With All Fittings, Such As, 15Mm Brass Ball Valve With Polythene Float With Brass Handle, Union Coupling Connected By Means Of 40Mm White Pvc Flush Hand Using Indian Adopter Joint Including All Internal Fittings, Such As, 15Mm Bras Connections, 15Mm Gm Wheel Valve, 15Mm Brass Nipple ( 2 Nos. ) , 15Mm Nylon Connection, Tw Plugs, Screws And Also Giving Necessary Connection To The Pvc Pipe And Painting The Ci Brackets With 2 Coats Of Approved Paint Over One Coat Of Red Oxide Primer, Dismantling The Masonry And Re-Doing The Dismantled Masonry To Original Condition, Etc., Complete Complying With Standard Specifications. ( The Ewc And Flushing Tank With All Accessories Should Be Got Approved By The Executive Engineer Before Use On Works ) Floor Fitting 84 S / F In Position Of Indian Make White / Colour Glazed Earthen Ware Lipped Mouth Flat Back Urinal Of Best Approved Quality With G.I.Pipe Connection To Suitable Length, 32Mm Bell Mouthed P.V.C Connection , 15Mm Dia G.M.Wheel Valve, Fixing The Urinal To The Wall In Position With Necessary T.W.Plugs , Clamps, Screws, Shellac Etc., Including Dismantling Masonry If Necessary And Redoing The Same To Original Condition , Fixing The 15Mm Dia. G.I.Pipe Connection And Wheel Valve , Painting The Pipe With Two Coats Of Approved Paint Over One Coat Of Primer And Checked Without Any Leakage Complete, Complying With Standard Specifications. ( The Urinal Should Be Got App-Roved By The Executive Engineer Before Use On Works. ) 85 Supplying And Fixing In Position Best Quality Approved Make White Glazed Earthenware Wash Hand Basin Of Size 550 X 400 Mm With A Pair Of Cast Iron Brackets, Including Cost Of 15Mm Diametre Brass Chromium Plated Piller Tape, 32 Mm Diametre C.P. Waste Union, 32 Mm Diametre P.V.C. Waste Pipe With Rubber Plug And Chain, 15Mm Diametre G.M.Wheel Valve, 15Mm Dia Brass Nipple, 15Mm Dia Nylon Connections Etc., Including Fixing The Wash Hand Basin In The Wall In Position With A Pair Of C.I. Brackets With Teak Wood Plugs Ad Screws And Giving Necessary Water Supply Connection And Paintiung The Brackets With Two Coats Of Paint Over A Primimg Coat Of Anticorrosive Paint Including Testing For Leackage Etc., Complete Complying With Standard Specifications ( The Wash Hand Basins And Specials Should Be Got Approved By The Executive Engineer Before Use On Works ) . 86 Supplying And Fixing Of Pvc Screw Down Tap Heavy Type 20Mm Dia Etc., Complete As Per Standard Specifications 87 Supplying And Erecting Sintex Or Approved Equivalent Make Hdpe Plastic Vertical Cylindrical 5000 Litre Water Storage Tank. Strickly Adhering Isi Standard As Per Isi Mark 12701 ( Latest Revision ) Including All Taxes And Freight Charges Within Corpn.City Limit Etc Complete As Per Stanadard Specifications 88 Supply And Fixing Of Pvc. Nahini / Floor Trap With Stainless Steel Gratings100 Mm X 75 Mm Including All Charges Etc, Complete As Per Standard Specification. 89 Providing Rain Water Harvesting Using 3 Nos Of Rcc Well Ring Of 90 Cm Inner Dia Ith 5 Cm Wall Thickness Made Out Of Cement Concrete 1:2:4 Using 20Mm Hard Broken Jelly To A Height Of 30Cm Each Supplying And Fabricating 16 No Of 6Mm Dia Ms Rod Vertically And 3 No Of 6Mm Dia Ms Rod Circumferentially Tied Together With 18 Gauge Binding Wire Of Well Ring Including Necessary Earth Work Excavation 1M Diato Depth Of 1M, Supplying And Filling 40Mm Hbg Inside The Ecrected Well Ring To A Depth Of 90Cm, And Top Covered With Rcc Circular Perforated Cover Slab Of 1M Dia And 5Cm Thick Which Inclusive Of Cost And Fabrication Of 6Mm Ms Reinforcement At 15Cm Spacing Or Both Direction And One 6Mm Ms Rod Ties At The Edge Of The Slab Circumferentially Including Cost Of Moulding, Curing, Finishing And Well Placing In Position And Disposing Off The Excavated Earth With All Initial Lead And Lifts In Place As Shown By The Departmental Officer 90 Supply And Fixing Of Carbon-Di-Oxide Gas Type 2 Kg. Capacity Fire Extinguisher As Per New Is15683, Complete With Control Valve, Discharge Hose With Horn, Wall Mounting Bracket, Safety Clip Etc., Including Conveyance, All Incidental Charges, Neccessary Scaffolding And Re-Doing The Dismantled Portions To Its Original Condition Wherever Found Neccessary Etc., Complete As Per Standard Specification And As Directed By The Departmental Officers. Make: Excellent / Safety First / Equivalent 91 Supply And Fixing Of Stainless Steel Solid Waste Garbage Bin Of Size 1.00 M Height And 0.30M Dia 92 Supply And Fixing Of Cctv Camera With Specification Of Dahua- Hac-Hfw 1100Dp-B-0600 720P 1 Mega Pixel Analoghigh Definition Camera, Outdoor-25 / 30 Fps@720P, 1 / 2.9 1 Megapixel Cmos, 50M Ir, Icr, 6Mm Lens Optional, Ir Bullet Dahua - Channel - Ahd, High Video Quality On Hd 1080N, Transmit Video Signal, Audio Signal & Dual Way Data Communication Signal Over One Coaxial Cable, Hd Video Transmission Without Video Quality Loss & Delay, Extremely, Long Transmission Distance ( 300 ) , As Directed By Departmental Executive Engineer. 93 Supply And Installing Sony Cctvcameralmr 94 29 Led Tv For Display Lmr 95 Poe Suitable For Cctv Ip Camera 24 Port 96 Rack With Accesssories - 12U Rack 97 Armoured Lan & Cctv Cable Cat 6 98 Hard Disk For Nvr ( 8Tb ) 99 Network Video Recorder For Cctv 16 Channel 100 Conducting Geophysical Survey, Quality And Quantity Test And Transportation Charges Etc, ( This Includes Labour Charges In The Field, Rent Of The Vehicle For Reaching The Place, Rent Of The Instrument And Excluding Charges For The Geoogist ) 101 Drilling Of Borewells Anywhere In Tamilnadu Including Transportation From One Place To Another Within Tamilnadu In Alluvial Soil Sedimentary Strata Of Clay And Sandstone Shale Pebbles Boulders Etc . By First Taking A Pilot Bore Of 140Mm / 150Mm Dia And Then Enlarging To Required Dia Direct Or Reverse Rotary Mud Circulation Method Using Rotary Rigs, Fuel , Labour And Drilling Bentonite And Waterrequired For Drilling At Site ( Site Will Be Shown By The Concerned Officers ) Including Construction Of Mud Pit 102 A ) Drilling 150Mm Dias Pilot Bore Belowground Leveltwad Board Schedule Of Ratesitem No 12.B. ( Ii ) 103 0.00 To 60.00 M 104 60.00 To105 .00 M 105 B ) Reaming From 150Mm Dia Pilot Bore As Directed By The Departmental Officers Upto 50M Depth Ending From Ground Level. 106 0.00 To 60.00 M 107 60.00 To105 .00 M 108 Supply Of Unplasticied Pvc Ribbed Screen Casing Pipe And Plain Casing For Borewells In 3M Length Screened And Threated Socket Ends With Couplers As Per Is 12828 / 89 To Suit Deep Borewells. 109 A ) 150 Mm Casing Pipe For Upto 80M Depth Pipe Assembly ( With Slot ) . 110 B ) 150Mm Cm For Upto 80M Depth Pipe Assembly 111 C ) 150Mm Dia End Cap Bore Well Cover. 112 Labour Charges For Inserting Pvc Casing Pipes Assembly ( With And Without Slot ) In The Drilled Hole Including Jointing The Pipeswith Cement Paste Complete And Packing Annualar Space With Pebbles Of Size And Quality As Approved By The Departmental Officers. 113 Charges For Developing Borewell With Air Compressor Of 300Cfm ( 100 / 150 Psi ) Capacity ( Minimum 8.00 Hours ) Including Transportation , Labour And Fuel Charges For Compressor As Directed By The Concerned Departmental Officersetc Complete And Also Conducting By V Notch Method 114 Supply Anddelivery Of Single Phase Submersible Pumpset Duty 20 Lpm, 125M Head With Isi Making For Motor Without Panel Board Should Conform To Is 8034 / 89 And As Ended From Time To Time .The Pumpset Should Be Supplied With 5M Of Flat Sub.Copper Cable And All Other Necssaries Etc. Complete As Per Std, Specifications 115 Supply And Delivery Of Direct Online Starter Confirming To Is13947, Iec60947-1 And As Amended Thereafter With Suitable Kw Rating For Operation In Ac / Single Phase / 50Hz ( ± 5% ) And 230 V ( ±10% ) Including Ammeter, Voltmeter, Thermal Overload Relay, 16 Amps 2 Pole Magnetic Contactor With Under Voltage Protection, Indication Lamp, Starting Capacitor, Running Capacitor And On / Off Push Button Switches, 5 Way Connector, Wiring With 1 Sq. Mm / 1.5 Sq. Mm Copper Pvc Insulated Cable, Powder Coated Vermin Proof Box Including The Capacitor ( The Cost Of Capacitor Is To Be Taken Separately ) . 116 Labour Charges For The Erection Of Submersible Pumpset In Borewell / Openwell Including Fixing And Jointing Submersible Cable With Proper Clamps Upto The Starter To Required Depth And Also Fixing Of Riser Pipes To The Required Depth Valves Erection Clamps, Pressure Gauges Upto The Exterior Wall Of Pump Room And Erection Of Panel Board Consisting Of Tpicn Switches Starter, Voltmeter, Ammeter, Three Pilotindicating ) Lamps Capacitor Single Phasing Preventor, Water Level Guard And Laying And Jointing The Cables And Twin Earthing As Per Ie Rules Etc., Complete And Testing The Pumpset And Trail Run For 10 Days. 117 Hdpe Pipes - Pe 100 As Per Is 4984 / 2016 ( Pre-Compounded Resin ) 118 Supply And Delivery Of Pvc Insulated And Sheathed Three Core 2.5 Sq.Mm Flat Type Copper Cable Conforming To Is 694 / 1990. Complete. 119 Supply And Delivery Of The Following Water Supply Materials With Isi Make 120 8Bore Cap 121 Ms 32 / 40Mm Ms Clamp Set 122 50Mm Dia Gm Non Return Valve 123 Nylon Rope For Borewell 124 Provision For Gst 18 %
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Tamil Nadu View Result →
31.
Educational and Research Institute #9057562 Technical Bid
Procurement of Laboratory Reagents/Chemicals and Consumables for Viral Research & Diagnostic Laboratory(VRDL) Under Microbiology Deptt. of Fakhruddin Ali Ahmed Medical College & Hospital, Barpeta, Assam Lab. Reagent And Consumable Items : , 100-100 ?L Filter Tips ( With Duel Filter Tips And Specific Certificate ) : • Description 50-1000 ?L , Sterile And Pcr Clean , 10 Racks Of 96 Tips =960 Tips, • The Filter Tip Must Offer Optimal Protection For Our Work From Cross Contamination And Enable Us To Use The Full Volume Of The Tip With Any Pipetting Mode. • They Must Feature The Unique Air Gap That Leaves Additional Space Between The Sample And The Filter. This Extra Space Prevents The Liquid From Touching, And Permeating The Filter And Thus Guarantees The Pipetting Accuracy. • Filter Tip Must Be Specified To Provide Protection From Contamination For Pipettes And Samples In The Following Applications: - Molecular Biology –Microbiology – Cell Culture. • Filter Tip Range – Pre – Sterilized –Purity Certified –Single Tray Racks –Volume Range From 10 To 5, 000 ?L. • 96 Tips In Convenient And Reusable Tray Racks. • Each Batch Has To Be Certified Free Of Dnase, Rnase, Human Dna And Endotoxins. • Informative Rack Labeling Must Be Present To Enable Easy Tip Identification And Traceability. • Hermetically Sealed Plastic Wrapping Must Be Present To Ensure Purity. • Empty Racks Must Be Easily Reloaded With Tip From Refill Towers And Packs. , 100-1000 ?L Non Filter Tip ( With Lot Specific Certificate ) : • Description : Standard Colorless 100-1000 ?L , 2 Bags Of 500 Tips = 1, 000 Tips, • Preferably Optifit Tips With High –Quality Standards. ( Fully Autoclavable At 121° C For 20 Minutes With 1 Bar / 100Kpa Pressure ) • Non-Filter Optifit Tips Which Are Available In Various Purity Levels And Package Option. • Optifit Tip Range –Extended And Wide –Bore Tips For Specific Applications. • Both Pre-Sterilized And Non-Sterile Should Be Available • Purity Certified Single Tray Racks And Refill Packs – Single Tray Racks, Refill Packs, Refill Tower And Bulk Packages • Volume Range From 10?L To 10Ml , 200 ?L Filter Tips ( With Duel Filter Tips And Lot Specific Certificate ) : • Description : 2-200 ?L , Sterile And Pcr Clean , 10 Racks Of 96 Tips =960 Tips, • The Filter Tips Must Offer Optimal Protection For Our Work From Cross Contamination And Enable Us To Use The Full Volume Of The Tip With And Pipetting Mode. • They Must Feature The Unique Air Grap That Leaves Additional Space Between The Sample And The Filter.This Extra Space Prevents The Liquid From Touching, And Permeating The Filter And Thus Guarantees The Pipetting Accuracy. • Filter Tips Must Be Specified To Provide Protection For Contamination For Pipettes And Samples In The Following Application :- Molecular Biology – Microbiology – Cell Culture. • Filter Tip Range – Pre Sterilized – Purity Certified –Single Tray Racks – Volume Range From 10 To 5, 000?L. • 96 Tips In Convenient And Reusable Tray Racks. • Each Batch Has To Be Certified Free Of Dnase , Rnase , Human Dna And Endotoxins. • Informative Rack Labeling Must Be Present To Enable Easy Tip Identification And Traceability. • Hermetically Sealed Plastic Wrapping Must Be Present To Ensure Purity. • Empty Racks Must Be Easily Reloaded With Tips From Refill Towers And Packs. , 200 ?L Non Filter Tips ( With Dual Filter Tips And Lot Specific Certificate ) : • Description : Standard Colorless 2-200 ?L , 2 Bags Of 500 Tips= 1, 000 Tips • Preferably Optifit Tips With High-Quality Standards. ( Fully Autoclavable At 121°C For 20 Minutes With 1 Bar / 100Kpa Pressure ) • Non-Filter Optifit Tips Which Are Available In Various Purity Levels And Package Options. • Optifit Tip Range - Extended And Wide-Bore Tips For Specific Applications. • Both Pre-Sterilized And Non-Sterile Should Be Available. • Purity Certified Single Tray Racks And Refill Packs - Single Tray Racks, Refill Packs, Refill Towers And Bulk Packages. • Volume Range From 10?L To 10Ml , 2-20 ?L Filter Tips ( With Dual Filter Tips And Lot Specific Certificate ) : • Description: 2-20 ?L, Sterile And Pcr Clean, 10 Racks Of 96 Tips = 960 Tips. • The Filter Tips Must Offer Optimal Protection For Our Work From Cross Contamination And Enable Us To Use The Full Volume Of The Tip With Any Pipetting Mode. • They Must Feature The Unique Air Gap That Leaves Additional Space Between The Sample And The Filter. This Extra Space Prevents The Liquid From Touching, And Permeating The Filter And Thus Guarantees The Pipetting Accuracy. • Filter Tips Must Be Specified To Provide Protection From Contamination For Pipettes And Samples In The Following Applications:- Molecular Biology – Microbiology - Cell Culture. • Filter Tip Range - Pre-Sterilized - Purity Certified - Single Tray Racks - Volume Range From 10 To 5, 000?L. • 96 Tips In Convenient And Reusable Tray Racks. • Each Batch Has To Be Certified Free Of Dnase, Rnase, Human Dna And Endotoxins. • Informative Rack Labelling Must Be Present To Enable Easy Tip Identification And Traceability. • Hermetically Sealed Plastic Wrapping Must Be Present To Ensure Purity. • Empty Racks Must Be Easily Reloaded With Tips From Refill Towers And Packs. , 2-20 ?L Non Filter Tips ( With Lot Specific Certificate ) : • Description: Standard 2-20 ?L, 2 Bags Of 500 Tips = 1, 000 Tips. • Preferably Optifit Tips With High-Quality Standards. ( Fully Autoclavable At 121°C For 20 Minutes With 1 Bar / 100Kpa Pressure ) • Non-Filter Optifit Tips Which Are Available In Various Purity Levels And Package Options. • Optifit Tip Range - Extended And Wide-Bore Tips For Specific Applications. • Both Pre-Sterilized And Non-Sterile Should Be Available. • Purity Certified Single Tray Racks And Refill Packs - Single Tray Racks, Refill Packs, Refill Towers And Bulk Packages • Volume Range From 10?L To 10Ml. , 0.5-10 ?L Filter Tips ( With Dual Filter Tips And Lot.Specific Certificate ) : • Description: 0.5-10 ?L, Sterile And Pcr Clean, 10 Racks Of 96 Tips = 960 Tips, • The Filter Tips Must Offer Optimal Protection For Our Work From Cross Contamination And Enable Us To Use The Full Volume Of The Tip With Any Pipetting Mode. • They Must Feature The Unique Air Gap That Leaves Additional Space Between The Sample And The Filter. This Extra Space Prevents The Liquid From Touching, And Permeating The Filter And Thus Guarantees The Pipetting Accuracy. •Filter Tips Must Be Specified To Provide Protection From Contamination For Pipettes And Samples In The Following Applications: - Molecular Biology - Microbiology-Cell Culture. • Filter Tip Range - Pre-Sterilized - Purity Certified - Single Tray Racks - Volume Range From 10 To 5, 000Pl. • 96 Tips In Convenient And Reusable Tray Racks. • Each Batch Has To Be Certified Free Of Dnase, Rnase, Human Dna And Endotoxins. • Informative Rack Labelling Must Be Present To Enable Easy Tip Identification And Traceability. • Hermetically Sealed Plastic Wrapping Must Be Present To Ensure Purity. • Empty Racks Must Be Easily Reloaded With Tips From Refill Towers And Packs. , 0.5-10 ?L Non Filter Tips ( With Lot Specific Certificate ) : • Description: Standard 2-20 ?L, 2 Bags Of 500 Tips 1, 000 Tips • Preferably Optifit Tips With High-Quality Standards. ( Fully Autoclavable At 121°C For 20 Minutes With 1 Bar / 100Kpa Pressure ) • Non-Filter Optifit Tips Which Are Available In Various Purity Levels And Package Options. • Optifit Tip Range - Extended And Wide-Bore Tips For Specific Applications. • Both Pre-Sterilized And Non-Sterile Should Be Available • Purity Certified Single Tray Racks And Refill Packs - Single Tray Racks, Refill Packs, Refill Towers And Bulk Packages • Volume Range From 10?L To 10Ml , 1.5 Ml Micro Centrifuge Tubes ( With Safe Lock Lid And Lot Specific Certificate ) : • Description: Safe-Lock Tubes, 1.5 Ml, Colorless, Pack Size: 500 • Hinged Safe-Lock Lid Prevents Unintentional Lid Opening During Incubation And Storage • Polypropylene Provides High Resistance To Chemicals, Mechanical Stress And Temperature Extremes • Manufactured Without Slip Agents, Blocides Or Plasticizers - Substances That Have Been Shown To Leach From Plastic Consumables Into The Sample And Negatively Affect Bio-Assay Results • G-Safe®: Exceptional Centrifugation Stability Up To 30, 000 × G • Guaranteed Functionality From -86 °C To 100 °C • Autoclavable ( 121 °C, 20 Min ) , 2 Ml Micro Centrifuge Tubes ( With Safe Lock Ild And Lot Specific Certificate ) : • Description: Safe-Lock Tubes, 2.0 Ml, Colourless, Pack Size: 500 • Hinged Safe-Lock Lid Prevents Unintentional Lid Opening During Incubation And Storage • Polypropylene Provides High Resistance To Chemicals, Mechanical Stress And Temperature Extremes. • Manufactured Without Slip Agents, Biocides Or Plasticizers - Substances That Have Been Shown To Leach From Plastic Consumables Into The Sample And Negatively Affect Bio-Assay Results • G-Safe®: Exceptional Centrifugation Stability Up To 30, 000 × G • Guaranteed Functionality From -86 °C To 100 °C • Autoclavable ( 121 °C, 20 Min ) , Autoclavable Bag ( Medium ) : Material: Pp Autoclavable. These Are Thick High Strength, High Temperature Resistant Autoclavable Bags. , Nitrile Gloves ( Small Size ) High Quality, Super Soft. Perfect Sensitivity And Comfort. Material: Nitrile : • 100 Purple Nitrile Exam Gloves / Box, Size Medium • Ambidextrous, 9.5, Beaded Cuffs To Prevent Roll-Down; Excellent Dexterity And Tactile Sensitivity With Textured Fingertips • Superior Quality, Aql 1.0 ( Exceeds The Astm 2.5 Standard For Critical Defects Or Pinholes ) • Astm Level: Passes Chemo ( Astm D6978-05 ) Tested For Use. • Options: 12 Color / Lengths & 6 Sizes Available • Cuff Style: Poignets Repliés • Material: Nitrile • Rightcycle: Yes • Textured: Textured Fingertips , Nitrile Gloves ( Medium Size ) High Quality, Super Soft. Perfect Sensitivity And Comfort. Material: Nitrile : • 100 Purple Nitrile Exam Gloves / Box, Size Medium • Ambidextrous, 9.5, Beaded Cuffs To Prevent Roll-Down; Excellent Dexterity And Tactile Sensitivity With Textured Fingertips • Superior Quality, Aql 1.0 ( Exceeds The Astm 2.5 Standard For Critical Defects Or Pinholes ) • Astm Level: Passes Chemo ( Astm D6978-05 ) Tested For Use. • Options: 12 Color / Lengths & 6 Sizes Available • Cuff Style: Poignets Repliés • Material: Nitrile • Rightcycle: Yes • Textured: Textured Fingertips , Nitrile Gloves ( Large Size ) High Quality, Super Soft. Perfect Sensitivity And Comfort. Material: Nitrile : • 100 Purple Nitrile Exam Gloves / Box, Size Medium • Ambidextrous, 9.5, Beaded Cuffs To Prevent Roll-Down; Excellent Dexterity And Tactile Sensitivity With Textured Fingertips • Superior Quality, Aql 1.0 ( Exceeds The Astm 2.5 Standard For Critical Defects Or Pinholes ) • Astm Level: Passes Chemo ( Astm D6978-05 ) Tested For Use. • Options: 12 Color / Lengths & 6 Sizes Available • Cuff Style: Poignets Repliés • Material: Nitrile • Rightcycle: Yes • Textured: Textured Fingertips , Latex Gloves ( Size 6.5 ) : • Fully Sterilized Latex Material Provides High Levels Of Contamination Protection • Hand-Specific, Disposable And A Natural Color • Textured Palm And Fingertips Enhance Grip And Tactile Sensitivity • Beaded Cuffs Add Strength To The Gloves Reducing The Risk Of Tearing • Easy Donning And Doffing • Made From Latex Sterilized With Gamma Radiation And Containing No Powder • Suitable For Use In Eu Gmp Iso Class 5 Grade A Or Higher Sterile Cleanrooms , Latex Gloves ( Size7 ) : • Fully Sterilized Latex Material Provides High Levels Of Contamination Protection • Hand-Specific, Disposable And A Natural Color • Textured Palm And Fingertips Enhance Grip And Tactile Sensitivity • Beaded Cuffs Add Strength To The Gloves Reducing The Risk Of Tearing • Easy Donning And Doffing • Made From Latex Sterilized With Gamma Radiation And Containing No Powder • Suitable For Use In Eu Gmp Iso Class 5 Grade A Or Higher Sterile Cleanrooms , Latex Gloves ( Size7.5 ) : • Fully Sterilized Latex Material Provides High Levels Of Contamination Protection • Hand-Specific, Disposable And A Natural Color • Textured Palm And Fingertips Enhance Grip And Tactile Sensitivity • Beaded Cuffs Add Strength To The Gloves Reducing The Risk Of Tearing • Easy Donning And Doffing • Made From Latex Sterilized With Gamma Radiation And Containing No Powder • Suitable For Use In Eu Gmp Iso Class 5 Grade A Or Higher Sterile Cleanrooms , Molecular Grade Ethanol 500Ml : • Appearance: Colourless Liquid • Solubility: 1 Ml Miscible In 1 Ml Of Water • Dnases: None Detected • Rnases: None Detected • Ftir ( Liquid Film ) : Matches With The Standard Pattern • Refractive Index ( N 20 / D ) : 1.355 -1.365 • Density ( At 25°C ) : 0.784 -0.794 G / Ml • Water ( K.F. ) : <= 0.2% • Assay ( Gc ) : Min, 99.80% , 70% Ethanol, 500Ml: • Appearance: Colourless Liquid • Solubility: Miscible In Water. • Boiling Point: -78°C • Density: -0.789 G / Ml At 25°C • Refractive Index ( N20 / D ) : -1.362 • Water ( By Karl Fischer ) : <= 0.2% • Residue On Evaporation : <= 0.001% • Dnases: None Detected • Rnases: None Detected • Assay ( Gc ) : Min. 99.80 % , Parafilm : Parafilm Is A Thermoplastic Self Sealing Film That Holds Moisture Loss To A Minimum And Offers Excellent Barrier Protection To The Content Of Tubes, Beakers, Flasks, Petri Dish, Vials, Etc. , Zip Lock ( Small ) : Material: Ldpe , Zip Lock ( Medium ) : Material: Ldpe , Zip Lock ( Large ) : Material: Ldpe , Cryo Vials 1.8 Ml ( With Lot Specific Certificate ) : • Preferably Cryochill Vials Which Provide Long Lasting And Robust Protection From Extremes Of Temperature. • Should Be Suitable For Use In The Vapour Phase Of Nitrogen, The Vials Should Be Designed For The Mechanical Freezer Also. • The Vials Must Meet Iata Requirement Of Withstanding Evacuation To 95 K Pascal Without Leaking And Are Suitable For Transport Of Diagnostic Specimen. • Material: Pp / Hdpe , R Nase Away / Out / Zap ( 250Ml ) : • Must Completely Removes Rnase Contamination From Glass And Plastic Surfaces • Must Excels At Removing High Levels Of Rnase Contamination Whereas Similar Products Fail • Proven Effective At Removing High Concentrations Of Dried-On Rnase A • Ideal For Cleaning Work Surfaces, Pipettors, And Equipment That Must Be Rnase-Free • Product Type: 250Ml Solution • Form: Liquid • Shipping Condition: Room Temperature , Delicate Task Wipers ( Tissue ) : Standard Size , Biohazard Disposable Bag 8X12:: Material: Pp Autoclavable. These Are Thick Have High Strength, Are High Temperature Resistant, Autoclavable Bags. They Are Clearly Labelled With Biohazard Warnings. Bright Red Colour For Quick Identification. , Biohazard Disposable Bag 12X 24 : Material: Pp Autoclavable. These Are Thick Have High Strength, Are High Temperature Resistant, Autoclavable Bags. They Are Clearly Labelled With Biohazard Warnings. Bright Red Colour For Quick Identification. , Rectified Spirit : 500Ml Pack Size , Chloroform : 500Ml Pack Size , 2-Propanol : 1000Ml Pack Size , High Quality Grade Bio-Medical Waste Dustbin With Pedal Lifting ( Size: 30 To 35 Liter ) : Colour :- Yellow , High Quality Grade Bio-Medical Waste Dustbin With Pedal Lifting ( Size: 30 To 35 Liter ) : Colour :- Red , High Quality Grade Bio-Medical Waste Dustbin With Pedal Lifting ( Size: 30 To 35 Liter ) : Colour :- Blue , High Quality Grade Bio-Medical Waste Dustbin With Pedal Lifting ( Size: 30 To 35 Liter ) : Colour :- Black , Storage Vial Capacity: 1Ml: ( Designed For Use With Samples From -80°C To 121°C. Dnase, Rnase, And Pyrogen-Free. Used For Storage Of Pcr Reagents, Enzymes And Other Diagnostics, Biochemical Reagents Or Samples. , Storage Vial Capacity: 2Ml: ( Designed For Use With Samples From -80°C To 121°C. Dnase, Rnase, And Pyrogen-Free. Used For Storage Of Pcr Reagents, Enzymes And Other Diagnostics, Biochemical Reagents Or Samples. , Storage Vial Capacity: 4.6Ml: ( Designed For Use With Samples From -80°C To 121°C. Dnase, Rnase, And Pyrogen-Free. Used For Storage Of Pcr Reagents, Enzymes And Other Diagnostics, Biochemical Reagents Or Samples. , Molecular Biology Grade Water ( 100Ml ) : D-Nase & R-Nase Free Water System , Laboratory Slipper , Absolute Alcohol : Pack Size:- 500Ml , Sample Bags 6”X13” , Sample Bags 9” X13” , Cryochill Vial Self-Standing Sterile, 2Ml , Single Channel Mechanical Pipette, 1-Ch, 0.1-3 ?: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Single Channel Mechanical Pipette, 1-Ch, 0.5-10 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Single Channel Mechanical Pipette, 1-Ch, 2-20 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Single Channel Mechanical Pipette, 1-Ch, 5-50 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Single Channel Mechanical Pipette, 1-Ch, 10-100 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Single Channel Mechanical Pipette, 1-Ch, 20-200 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Single Channel Mechanical Pipette, 1-Ch, 100-1000 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Single Channel Mechanical Pipette, 1-Ch, 500-5000 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Single Channel Mechanical Pipette, 1-Ch, 1000-10000 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° “Do-It-Yourself Calibration-Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Multi Channel Pipettes 8-Ch, 0.5-10 ?L.: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° Do-It-Yourself Calibration- Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Multi Channel Pipettes 8-Ch, 10-100 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° Do-It-Yourself Calibration- Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Multi Channel Pipettes 8-Ch, 30-300 ?L: ° Wide Range Of Pipettes, Both Adjustable And Fixed Volume ° Volume Setting With Click Stop- Easy-To-Use Volume Setting ° Ergonomic Finger Support- No Need To Squeeze The Pipette During Pipetting, Reduces The Risk Of Rsi ° Clear Volume Display- Easy To Read Volume Minimizes The Risk Of Volume Setting Errors ° Do-It-Yourself Calibration- Re-Calibration Possible E.G.For Different Liquids ° Tip Cone Material Highly Chemically Resistant - Highly Durable Tip Cone ° Safe-Cone Filters Available For Models > 10 ?L - Contamination-Free Pipetting , Micro Amp Rtpcr Machine 96 Well Reaction Plate, For Thermo ( Abi ) Quantstudio 5 Machine Pack Size: 10 To 20 Plates / Pkt: • Frosted To Minimize Interfering Fluorescence From Wells Of Cycling Block • Screened To Eliminate Auto-Fluorescent Plates • Unique Design Provides A Barrier To Ambient Air To Help Ensure Well-To-Well Temperature Uniformity Color:Optical Material: Polypropylene Quantity: 10 To 20 Plates Size: 0.2 Ml No. Of Wells: 96 Reaction Speed: Standard Type: Microplate Format: 96-Well Plate Barcode: No Barcode , Micro-Seal B Pcr Plate Sealing Film, 25 To 100 / Pk ( Compatible With Bio-Rad Cfx 96 And Thermo ( Abi ) Qantstudio 5 ) : • Pressure-Sensitive Adhesive Provides A Tight Seal Over Every Well • Will Not Interfere With Sample Reading • Press-N-Seal: Align Properly To The Plate, Then Press To Seal • Easy To Apply-Will Not Stick To Your Glove Use This Optically-Clear Adhesive Film To Seal The Samples Into The Wells Of A Micro Plate. This Will Reduce The Possibility Of Cross-Contamination Between Sample Wells And Help Ensure Consistent Real-Time Pcr Data. Color: Optical Material: Polyester Type: Film, Seal, Or Applicator No. Of Wells: 96 No, Per Case: 25 Covers Shipping Condition: Room Temperature Adhesive: Pressure Sensitive Plate Compatibility: 96-Well Plates , Disposable Cap: This Material Is Preferred For Its Light Weight. Its Gravity Is Lighter Than Hydrophobic Pp Fibers So It Has Excellent Water Repellency And Air Permeability Resulting In Providing Comfort & Dryness Resulting In Anti Bacterial And Anti Fungal Resistance. Usage / Application: Hospital. Size: 21 Inch. Color: Green. Packaging Type: Hdpe Bag, Box. Gsm: 22-25. Pattern Best Quality And Iso Certified , Fogging Machine : Electrically Operated Aerial Fogging System. Power Supply: 220-240 Volts, 50 / 60 Hz Ac, 4.0 Amps Single Phase Supply. Continuous Duty Hour: 60 Minutes. Dimensions: ( Without Filter & Power Head Housing In Horizontal Position ) Length 300Mm & Width 280Mm, Height ( Blower Horizontal ) 460Mm Sound Level: Db<84 Db Chemicals Fogged: Disinfectants, Biocides, Fungicides, Pesticides, Anti Mildew Chemicals. Capacity Of Tank ( Net ) : 5.0 Liters Droplet Size: Ultra Fine ( Less Than 5 Micron ) Jet Throw In Closed Room: 40 Feet Distance, 25 Ft Height, ( Still Air Conditions ) Metering System: Adjustable ) : 0-90Ml / Minute Material Of Construction:Power Housing: Engineering Plastic Nozzle, Metering Valve Parts: Stainless Steel &Eng. Plastics Solution Tank Set: Stainless Steel &Eng. Plastics Tubing: Silicone Hardware Connectors: Stainless Steel Intake Filter Bag Type, Fits Over Rear Housing: Washable , Surface Disinfectant 3Rd / 5Th Generation Quaternary Ammonium Compound 1000Ml Composition: ? Polymeric Biguanide Hydrochloride < 10% ? Alkyl Dimethyl Benzyl Ammonium Chloride &Didecyl Dimethyl Ammonium Chloride < 10% ? Benefits: Aldehyde Free, Corrosion Free, Better Than 5Th Generation Qac Because Of Added Phmb ? Chlorine Free Formula, Excellent For White And Coloured Linen Suitable For All Surfaces, Furniture, Appliances, Dental & ? General Practice Environment ? Application ? Manual Cleaning ? Concentration: Non Infected 0.5%, Infected: 1% ? Soak Time: 15 Mins ? Temperature: Room Temperature ? Automatic Cleaning ? Concentration: Non Infected 0.5%, Infected: 1% ? Soak Time: 10 Mins ? Temperature: 70°C ? Surface Disinfection Critical Areas ? Method Of Application: Mopping / Wiping Floor, Walls, Furniture, Equipments, Operation Tables And Ot Lamps Dilution: 0.5% ( 5Ml Made Up To 1000Ml With Water ) ? Contact Time: 15 Min ? Surface Disinfection Non-Critical Areas ? Method Of Application: Mopping Of Waiting Halls, Corridors, Reception Areas, Tables, Chairs, Table Tops, Wards Etc ? Dilution: 0.5% ( 5Ml Made Up To 1000Ml With Water ) , 1% ( 5Ml Made Up To 1000Ml With Water ) For Heavy Load ? Contact Time: 5 Min-15 Min ? Spill Management Blood / Vomit / Other Body Fluid ? Method Of Application: Mopping Of Floor And Tables ? Dilution: 10% ( 100Ml Made Up To 1000Ml With Water ) . ? Contact Time: 5 Min ? Fogging ? Method Of Application: To Be Used For Every 1000 Cu.Ft In High Risk Areas Like Ot, Icu, Iccu, Nicu, Cath Lab , Akd ?Dilution: 0.5%-1% ( 5Ml-10Ml Made Up To 1000Ml With Water ) , ? Contact Time: 1 Hour ? Spectum: Mycobactericidal, Virucidal, Fungicidal, Bactericidal, Pseudomonacidal And Also Effective Against Hiv, Hbv ? & Mrsa , Sodium Hypochlorite, 1000Ml :Specific Gravity At 25°Cmin 1.175 Available Chlorine Min 11.50%Wt ( ±1% ) Total Alkali As Naohmax 1.45% , Colorstraw Yellow: Ph 11.1-11.19 , Falcon Tube ( 50 Ml ) Polypropylene, Transparent, Sterilized, : Pack Of: 500 , Test Tube ( 15 Ml ) Polypropylene, Transparent, Sterilized, : Pack Of: 501 , Plastic Beaker1000ml : ( Borosilicate Heat Resistant Polypropylene Plastic And Autoclavable ) , Plastic Beaker500ml: ( Borosilicate Heat Resistant Polypropylene Plastic And Autoclavable ) , Plastic Beaker250ml: ( Borosilicate Heat Resistant Polypropylene Plastic And Autoclavable ) , Plastic Beaker100ml: ( Borosilicate Heat Resistant Polypropylene Plastic And Autoclavable ) , Reversible Pcr Racks, : Pack Of: 06 , Utility Tray : 320X260x100 Mm ( Autoclavable, Polypropylene ) Pack Size: 06 , Conical Flask With Screw Cap ( Autoclavable ) , : 250 Ml Capacity , Drying Rack : No. Of Rack 30 , Float Rack : 1.5Ml X 8 Capacity , Funnel : ( Size Dia Mm 65 ) , Reversible Pcr Racks, : Pack Of: 06 Nos , Indicator Tape For Autoclave ( 1 X500 ) , Instrument Sterilizing Pan : ( 220X150x70 Mm ) , Pack Of: 02 , Measuring Beaker With Handle ( Autoclavable ) : 500 Ml Capacity , Measuring Beaker With Handle ( Autoclavable ) : 250 Ml Capacity , Measuring Cylinder : 100Ml Capacity , Measuring Cylinder : 500Ml Capacity , Storage Box Capacity 300: ( 75X62x117 Mm ) Pack Size: 04 , Wash Bottle : 250Ml Capacity ( Material Ldpe ) , Wash Bottle:500 Ml Capacity ( Material Ldpe ) , Roll Of Aluminum Foil , Autoclave Wrapping Paper For Wrapping Materials During Autoclaving , Tourniquet , Tissue Paper Roll : Use For Research Work , Cotton Thread Roll , Hand Sanitizer ( Chlorhexidine / Alcohol ) With Emollient And Moisturizer, 500 Ml , Multipurpose Labelling Tape Roll ( Size 075X500 ) , Cryo Tags These Labels Withstand Conventional And Cryogenic Storage Conditions. The Label Withstands Boiling Water Baths At 100°C And Dry Heat Upto 150°C Without Degrading. , 2Ml Pcr 8 Strips With Flat Caps ( 125 Strips Per Box ) Range Is Available In 8 Tube Strips Available In 0.2 Ml Clear Or White Tubes. There Is Choice Of Flat And Domed, And Ultra Clear Caps. They Are Suitable For 0.2 Ml Or 0.5 Ml Thermal Cycler Blocks. Clear Caps Suitable For Real Time Pcr. Thin Wall Design For Even Heat Transfer. Clean Room Production For Consistent Results. High Quality Amplification. Suitable For Traditional Pcr / Hot Start Pcr. Rnase / Dnase / Pyrogen Free. / Material: Pp , Rtpcr Plate For Bio-Rad Rtpcr Machine Model: Cfx96 Hard Shell 96 Well Plates ( 0.1 Ml ) , Low Profile, Thin Wall Shirted, White / Clear, Pack Size: 10 To 50 Plates / Pkt , Digital Thermo Meter Easy To Read, Fast Response, Small Size Thermometers. With 1Meter Waterproof Probe Digital Thermometer With Sensor Range In Celcius: -50-+110°C Resolution: 0.1°C Accuracy: 1°C Survey Cycle: 10 Sec Power Supply: 1.5V ( Lr44 ) Battery Standard Accessories: Operational Manual, 1 Pc 1.5Vlr44 Cell & One Pc Supporter , Spraying Bottle Pack Size: 1000 Ml , Blotting Paper, Pack Size: 100 Pieces , Micropipette Stand, Capacity: 5 , Self-Standing Holder Accommodates Most Major Brands Of Pi Petters.Material: Pmma , Autoclavable Bag ( Large ) , Pack Size: 100 Material: Pp Autoclava Ble. These Are Thick High Strength, High Temperature Resistant Autoclavable Bags. , Cry Boxpack Size : 4 , Cooling Rack ( 96 Well ) Handling System For Sample Set-Up, Protection, Transport, And Storage Of Sensitive Samples - Keep You Samples Safe Clear Temperature Indicator: Color Of Pcr Cooler Changes When Temperature Exceeds 7 °C Dry Incubation Technology Reduces Contamination Risk Of Samples Keeps An Entire 96-Well Pcr Plate Cold For More Than An Hour At 0 °C ( With Two-Hour Precooling At -20 °C ) For Safe Samples Application: Cooling Of Samples During Pcr Sample Preparation , Mct Rack, Place: 96, Pack Size: 06 , Pcr Rack, Place: 96, Pack Size: 06 , 0.2Ml Pcr Strips , Dna Ladder ( 50Bp ) - 500 / 250?L , Dna Ladder ( 100Bp ) - 500 / 250?L , Gel Red ( Nucleic Acid Stain / Gel Stain ) - 1Ml , Pcr Master Mix 2X- 100 Rxn , Conventional Pcr Primers , 2X Rtpcr Master Mix With Loading Dye- 100 Rxn , 6X Gel Loading Dye- 1Ml , 2X Qrt-Pcr Master Mix- 100 Rxn , Tetrasodium / Disodium Edta- Molecular Biology Grade- 100Gm , 10-100 ?L Filter Tips ( With Dual Filter Tips And Lot Specific Certificate ) Tips. The Filter Tips Must Offer Optimal Protection For Our Work From Cross Contamination And Enable Us To Use The Full Volume Of The Tip With Any Pipetting Mode. They Must Feature The Unique Air Gap That Leaves Additional Space Between The Sample And The Filter. This Extra Space Prevents The Liquid From Touching, And Permeating The Filter And Thus Guarantees The Pipetting Accuracy. Filter Tips Must Be Specified To Provide Protection From Contamination For Pipettes And Samples In The Following Applications: - Molecular Biology - Microbiology - Cell Culture. Filter Tip Range - Pre-Sterilized - Purity Certified - Single Tray Racks - Volume Range From 10 To 5, 000?L. 96 Tips In Convenient And Reusable Tray Racks. Each Batch Has To Be Certified Free Of Dnase, Rnase, Human Dna And Endotoxins. Informative Rack Labelling Must Be Present To Enable Easy Tip Identification And Traceability. Hermetically Sealed Plastic Wrapping Must Be Present To Ensure Purity, Empty Racks Must Be Easily Reloaded With Tips From Refill Towers And Packs. , Elisa Kit , Measles Virus A. Serum Sample –Igm Qualitative Elisa ( 96 Test ) B. Solid Phase Elisa C. Sensitivity =99% And Specificity =98% D. Certification : Who Gmp / Fda Or Niv / Cdc Recommended. , Rubella Virus A.Serum Sample- Igm Qualitative Elisa ( 96 Test ) B. Solid Phase Elisa C.Sensitivity =99% And Specificity =98% D. Certification: Who Gmp / Iso / Fda Or Niv / Cdc Recommended , Rota Virus A. Stool Sample- Antigen Elisa B. Solid Phase Elisa C. Sensitivity =99% And Specificity =98% D. Certification: Who Gmp / Iso / Fda Or Niv / Cdc Recommended , Hsv ( I & Ii ) Virus Solid Phase Elisa Preferred Make ( In Order Of Preference ) : 1. Calbiotechor Any Other Company / Firm Sensitivity = 99% And Specificity = 98% Certification: Who Gmp / Iso / Fda Certification Or Niv / Cdc Recommendation. , Hepatitis A Virus Solid Phase Elisa Preferred Make ( In Order Of Preference ) : 1. Hepavase 2. Axyme 3. Immunovision Usa 4. Drg International Usa 5. Immunoshop Or Any Other Company / Firm Sensitivity = 99% And Specificity = 98 % Certification: Who Gmp / Iso / Fda Certification Or Niv / Cdc Recommendation , Hepatitis B Virus Solid Phase Elisa Preferred Make ( In Order Of Preference ) : 1. Axyme 2. Abbot 3. J.Mitraco.Pvt.Ltd ( Who ) 4. Bio-Rad Usaor Any Other Company / Firm Sensitivity = 99% And Specificity = 98 % Analytical Sensitivity 0.1Ng / Ml Certification:Who Gmp / Iso / Fda / Certification Or Niv / Cdc Recommendation , Hepatitis E Virus Solid Phase Elisa Preferred Make ( In Order Of Preference ) :1. Mp Diagnostic 2. Mb Ssrl Milano Italyor Any Other Company / Firm Sensitivity = 99% And Specificity = 98 % Certification: Who Gmp / Iso / Fda Certification Or Niv / Cdc Recommendation , Hepatitis C Virus Solid Phase Elisa Preferred Make ( In Order Of Preference ) : 1. Orthodiagnostics 2. J.Mitraco.Pvt.Ltd 3. Biorad Usaor Any Other Company / Firm. Should Detect Of All Hcv Genotypes Including The Genotypes 1, 1A &B Prevalent In India. Sensitivity = 99% And Specificity = 98% Certification: Who Gmp / Iso / Fda Certification Or Niv / Cdc Recommendation , Hepatitis D Virus Solid Phase Elisa Preferred Make ( In Order Of Preference ) : 1. General Biological Corporation, Taiwan 2.Dsi, Sri Italyor Any Other Company / Firm Sensitivity = 99% And Specificity = 98% Certification: Who Gmp / Iso / Fda Certification Or Niv / Cdc Recommendation , Leptospira Solid Phase Elisa Preferred Make ( In Order Of Preference ) : 1. Pan Bio Or Any Other Company / Firm Sensitivity = 99% And Specificity = 98% Certification: Ivd / Fda / Ce / Who Approved Or Niv / Cdc Recommendation , West Nile Virus Solid Phase Elisa Preferred Make ( In Order Of Preference ) : 1. Focus Diagnostics 2. Pan Bio 3. In Biosor Any Other Company / Firm Sensitivity = 99% And Specificity = 98 % Certification: Who Gmp / Iso / Fda / Certification Or Niv / Cdc Recommendation , Pcr Kits: , Influenza Panel Real Time Pcr Kit [ Influenza A, Influenza A ( Pandemic H1n1 ) , Influenza A ( H3n2 ) , Influenza B ( With Subtypes Yamagata & Victoria ) Throat Swab / Nasopharyngeal Swab Specimen Qualitive Real Time Pcr Ready To Use Kit Including Internal Control And Positive Control Compatible With Various Real Time Pcr Platforms Like Abi 7500, Abi Quant Studio 5, Bio-Rad Cfx 96, Roche Lc 480 Etc. Sensitivity And Specificity Of = 99% Will Be Preferred. Analytical Sensitivity ( Limit Of Detection ) = 95%. Ce-Ivd Approved / Niv-Icmr Or Who Recommended , Multiplex Rt-Pcr Kit For Respiratory Pathogen ( Virus: Influenza A, Influenza A ( H3n2 ) , Influenza B, Inf Pandemic ( H1n1 ) , Parainfluenza ( 1-4 ) , Enterovirus, Human Metapneumo Virus ( A + B ) , Human Respiratory Syncytial Virus, Adeno Virus, Human Rhino Virus, Human Boca Virus, Human Parecho Virus, Human Corona Virus ( Alpha And Beta ) ( Bacteria: Mycoplasma Pneumonia, Chlamydia Sp, Legionella Sp, Streptococcus Pneumoniae, Haemophilus Influenzae A-F ) Throat Swab / Nasopharyngeal Swab Specimen Qualitative Real Time Pcr Ready To Use Kit Including Internal Control And Positive Control Compatible With Various Real Time Pcr Platforms Like Abi 7500, Abi Quant Studio 5, Bio-Rad Cfx 96, Roche Lc 480 Etc. Sensitivity And Specificity Of = 99% Will Be Preferred. Analytical Sensitivity ( Limit Of Detection ) = 95%. Ce-Ivd Approved / Niv-Icmr Or Who Recommended , Viral Meningitis Panel Real Time Pcr Kit ( Entero Virus, Epstein-Barr Virus, Hsv 1 & 2, Human Adeno Virus, Human Parecho Virus, Human Parvo Virus B19, Varicella Zoster Virus ] Serum / Csf Specimen Qualitative Real Time Pcr Ready To Use Kit Including Internal Control And Positive Control Compatible With Various Real Time Pcr Platforms Like Abi 7500, Abi Quant Studio 5, Bio-Rad Cfx 96, Roche Lc 480 Etc. Sensitivity And Specificity Of = 99% Will Be Preferred. Analytical Sensitivity ( Limit Of Detection ) = 95%. Ce-Ivd Approved / Niv-Icmr Or Who Recommended , Viral Gastroenteritis Panel ( Rota Virus, Adeno Virus, Noro Virus, Astro Virus And Sapovirus ) Real Time Pcr Kit Serum / Plasmaspecimen Quantitative Real Time Pcr Kit Ready To Use Kit Including Internal Control And Positive Control Compatible With Various Real Time Pcr Platforms Like Abi 7500, Abi Quant Studio 5, Bio-Rad Cfx 96, Roche Lc 480 Etc. Sensitivity And Specificity Of = 99% Will Be Preferred. Analytical Sensitivity ( Limit Of Detection ) = 95%. Ce-Ivd Approved / Niv-Icmr Or Who Recommended , Hepatitis C Virus Serum / Plasmaspecimen Quantitative Real Time Pcr Kit Ready To Use Kit Including Internal Control And Positive Control Compatible With Various Real Time Pcr Platforms Like Abi 7500, Abi Quant Studio 5, Bio-Rad Cfx 96, Roche Lc 480 Etc. Sensitivity And Specificity Of = 99% Will Be Preferred. Analytical Sensitivity ( Limit Of Detection ) = 95%. Ce-Ivd Approved / Niv-Icmr Or Who Recommended , 6. Hepatitis B Virus Serum / Plasma Specimen Quantitative Real Time Pcr Kit Ready To Use Kit Including Internal Control And Positive Control Compatible With Various Real Time Pcr Platforms Like Abi 7500, Abi Quant Studio 5, Bio-Rad Cfx 96, Roche Lc 480 Etc. Sensitivity And Specificity Of = 99% Will Be Preferred. Analytical Sensitivity ( Limit Of Detection ) = 95%. Ce-Ivd Approved / Niv-Icmr Or Who Recommended
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Assam View Result →
Andhra Pradesh View Result →
33.
Heavy Industries and Public Enterprises #8975666 Technical Bid
System Design, Engineering, Manufacturing, System Design, Engineering, Manufacturing, Supply, Eandc Pg Test Etc. Of Conveyor Package Including Lhp And Ghp For 3X800mw Patrathu Tps, Jharkhand. , Supply Part Comprising Of Design ( I.E. Preparation And Submission Of Drawing / Documents Including As Built Drawings And O&M Manuals ) , Engineering, Manufacture, Fabrication, Assembly, Inspection & Testing At Vendors & Sub-Vendors Works, Painting, Maintenance Tools & Tackles, Mandatory Spares , Spares For Erection, Startup And Commissioning As Required, Fill Of Lubricants & Consumables And Till Cod Of The Units, Forwarding, Proper Packing, Shipment And Delivery At Site For Project And Package Complete With All Accessories For The Total Scope Defined As Per Bhel Nit & Tender Technical Specification, Amendment & Agreements Till Placement Of Order. , Coal Handling Plant , Complete Conveyor System ( 3500 Mtph Rated / 3850 Mtph Design, 2000Mm Belt Width, Belt Speed Of Conveyors Shall Not Be More Than 3.4 M / S Complete With Idlers ( With Frames, Brackets ) , All Types Of Pulleys With Plummer Blocks And Bearings, Deflector Rollers, Drive Chain System ( Gear Boxes, All Types Of Fluid Couplings ( Fluid Coupling, Scoop Coupling, Flexible Coupling, Geared Couplings, Other Input And Output Couplings ) , Brakes, Technological Structures, Including Gtu Towers ( Other Than With Tps And Conveyor Trestles ) , Gtu Travel Guide Pipes, Ci Counter Weights ( If Applicable ) , Cradles, Short Supports, Stringers, Stools, Skirt Board And Skirt Rubber, Deck Plates Throughout Conveyor Length , Maintenance Platforms, Inspection Doors, Inspection Stools, Ladders, Bolts, Anchor Fasteners, Templates, External Scrappers, Internal Scrappers, Foundation Bolts & Nuts, Rubber Sealing, Drive Base Frame, Base Plate, Shim Plate Etc. With All Electricals And C&I ( Except For Items Indicated Separately Under Electrical , C&I As Per Electrical Scope ( Section D Of This Spec. ) , Nylon-Nylon Belt For Conveyors ( As Applicable ) , With Splicing Kit As Per Requirement And Specification , Steel Cord Belt For Conveyors ( As Applicable ) , With Splicing Kit As Per Requirement And Specification , Complete Reversible Belt Feeders In Crusher House ( 2400 Bw, 20 Deg Troughing Idler Angle At 1.5 M / S Max. Speed ) Rated 1750Tph / Design 1925 Tph ( Including Supply Of Belt ) With All Electricals And C&I. , Complete Belt Feeders In Crusher House ( 2400 Bw, 20 Deg Troughing Idler Angle At 1.5 M / S Max. Speed ) Rated 1750Tph / Design 1925 Tph ( Including Supply Of Belt ) With All Electricals And C&I. , Inline Magnetic Separators With Belt, Drives, Fixing Lugs, Slings, Fixing Accessories, Tramp Iron Chute Up To Ground Level, Reject Trolley And With All Electricals And C&I Etc. , Metal Detectors Along With All Electricals And C&I. , Suspended Magnet Along With Fixing Lugs, Slings, Fixing Accessories, Tramp Iron Chute, Reject Trolley All Electricals And C&I. , Belt Weighers Along With All Electricals And C&I. , Chutes With Chute Support Structure, Chute Block Switches In Building & Tunnel, Transfer Points, Crusher House, Wagon Tippler Complex, Track Hopper Complex Etc. Including Liners In Crusher Supporting Rcc Deck, Tramp Iron Chutes Upto Ground Level And With All Electricals And C&I. , Complete Travelling Tripper Machine With Drives, Flap Gates ( Motorized ) With Actuator, Two-Way Chute, Including Supports, Rails, Rail Fixtures, Clamps And Other All Electricals And C&I, Drives & Accessories. Rated 3500 Tph / Design 3850 Tph ( For Drives Geared Motors Are Not Acceptable, So Bidder To Provide Conventional Electro Mechanical Drive I.E. Gearbox, Brake And Motor ) . Drive Rating Shall Be Min. 2 X 50 %. , Bunker Sealing Arrangement Complete With Idlers, Tensioning Arrangement, Etc. ( Including Supply Of Belt ) . , Complete Coal Sampling Unit At Crusher House, ( - ) 250 Mm , Occasional 400Mm Uncrushed Coal With All Electricals And C&I. , Complete Coal Sampling Unit At Tp-5, ( - ) 20 Mm Crushed Coal With All Electricals And C&I. , Flap Gates With Motorized Actuator Including Limit Switches, Fixing Supports, Maintenance Access And All Electricals And C&I. , Rack And Pinion Gates With Actuators, Fixing Supports, Maintenance Access And All Electricals And C&I. , Rod Gates, Fixing Supports, Maintenance Access. , Fixed Trippers With Belt Guards And Other Accessories. , Electrical Hoist With All Electricals And C&I For Entire Chp, Lhp & Ghp Transfer Points, Storage Sheds, Crusher House , Bunker Floors, Gtu, Wagon Tippler Complex, Track Hopper Complex, Pump Houses Etc. , Manual Hoist With Travelling Trolley And Chain Pulley Blocks For Entire Chp, Lhp & Ghp Transfer Points, Storage Sheds, Crusher House , Bunker Floors, Gtu, Wagon Tippler Complex, Track Hopper Complex, Pump Houses Etc. , 3 Ton Capacity Motorised Electric Winches At Ba Tp-5 For Gtu With All Electricals And C&I. , Sump Pumps Including Discharge Piping Valves, Accessories & Support Structure Along With All Electrics And C&I For Entire Chp, Lhp & Ghp. , 1000Kg Rope & Sheave Type Passenger Cum Goods Elevator Shall Be Provided Along With Electricals And C&I For Crusher House And Tp-5 ) . The Elevator Shall Be Designed As Per Clause No 5.17.0 And Data Sheet Of Elevator Of Sub Section-A-23, Of Part B Of Technical Specifications , Belt Vulcanizing Machine With Tool Kit For 2400Mm Belt Width With All Accessories, Consumables, Etc. With All Electricals And C&I. , Complete Online Coal Analyzer All Electricals And C&I. , Radiation Survey Meter , Complete Venturi Scrubber Type Wet Dust Collection System For Vibrating Feeder And Reversible Belt Feeders After Crusher In Crusher House With All Electricals And C&I. , Complete Manual Stone Picking Arrangement Along With Chutes & Other Accessories. , Rails & Rail Fixtures For Coal & Limestone Paddle Feeder Machine ( 1750Tph ) In Chp Track Hoppers For Paddle Feeder Travel. , Ring Granulator Crushers For Coal Complete With Scoop Couplings ( Air Cooled Type ) , Hydraulic Door Opening Mechanism, Vibration Isolation System, Drive Base Frames And Associated Electrical ( Except Ht Motor ) And Control & Instrumentation Equipment Along With Startup And Commissioning Spares. 1750Tph Rated / 1925Tph Design / 1925Tph Guaranteed Capacity. , Vibrating Feeders Before Crusher With Solid Deck With All Electricals And C&I. 1750Tph Rated / 1925Tph Design / 1925Tph Guaranteed Capacity. , Minimum Equipment To Be Considered For Chp Building And Workshop , 3 Phase Welding Machine , Bench Grinder , Bench Drilling M / C ( 20Mm ) , Bench Vice ( Size 100Mm -200Mm ) , Monorail Hoist 5 Mt , Induction Bearing Heater , Portable T&Ps Like Grinder, Drill Machine, Welding Machine, Mechanical And Hydraulic Jacks / Pullers, Cutting Set, Chain Pulley Blocks, Max Pullers, Electronic Weighing M / C , 10T Eot Crane Along With All Electricals And C&I For Chp Workshop Building With Rails And Rail Fixing Accessories For Eot Cranes. , Minimum Equipment To Be Considered For Dozer Shed , Air Compressor , Gas Cutting , Gas Welding , Brazing Set , 3 Phase Welding Machine , Bench Grinder , Bench Drilling M / C ( 20Mm ) - , Bench Vice ( Size 100Mm -200Mm ) , Minimum Tools And Tackles To Be Considered , Torque Wrench Required Up To M24 Bolts , Bearing Puller Set To Pull Up To Maximum Bearing Size In System , Hydraulic Jack 50 T , Lifting Trolley For Lt Circuit Breakers , Electrical Power Winch With Wire Rope 7.5 T & 1500 M Galvanized Wire Rope , Bearing Grease Gun , Complete Conveyor Tunnel Ventilation For Chp & Lhp And Ventilation Of Underground Transfer Points, Underground Portion Of Coal Track Hoppers, Underground Portion Of Wagon Tippler Complex, Underground Portion Of Limestone Reclaim Hopper Etc. For Chp & Lhp As Per Specification Complete With All Mechanical & Electrical Accessories. , Complete Dry Type Pressurized Ventilation System For Following Mcc Rooms / Switchgear Rooms As Per Specification Complete With All Mechanical & Electrical Accessories. - Chp Mcc-1 - Chp Mcc-2 - Chp Mcc-3 - Chp Mcc-4 - Chp Mcc-5 , Complete Ventilation System For Bunker Bay ( Housing Tripper Conveyors For Chp, Lhp, Ghp And Ash Conveyor System Ba Main Silos Top Floor ) , , Chp Workshop Building, Battery Room Of Control Rooms, Toilets, Roof Extractors For Lhp Over Ground Storage Shed, Roof Extractors For Ghp Over Ground Storage Shed Etc. Complete With All Mechanical & Electrical Accessories. , Complete Air Conditioning System For Following Buildings, As Per Specification Complete With All Mechanical & Electrical Accessories. - Chp Mcc-1 ( Near Track Hopper ) Rio Room - Chp Mcc-2 ( Near Tp 2A ) Rio Room - Chp Mcc-3 ( Near Crh ) Control Room - Chp Mcc-3 ( Near Crh ) Rio Room - Chp Main Office Room ( In Chp Mcc-3 ) - Chp Mcc-4 ( Near Tp 4 ) Rio Room - Chp Mcc-5 ( Near Tp 5 ) Rio Room - Wagon Tippler Control Room 1 - Wagon Tippler Control Room 2 - Split Acs For Office Rooms , Electrical & C&I For All Chp Equipment Above, As Per Electrical Scope ( Section D Of This Spec. ) Shall Be Considered Under This Head: Ht Motors, Lt Motors, Trailing / Flexible Cables, All Data Cables / Special Cables, Temperature Transmitters, Power & Control Junction Boxes, All Electrical Panels, All Field Devices, Limit Switches, Speed Control Devices, All Brakes And Clamps With Complete Accessories, Earthing & Lightning, , Dcs Logic & Hmi Development Documents, Chp Control Desk, Main Mcc, Lt Bus Ducts, Lt Transformers, Vibration Monitoring System For Crushers, Illumination, Cable Trays & Supports, Hooters, Power Distribution Boards, Plc, Ups, Cable Terminations, Brackets And Structural Steel, Maintenance Tools & Tackles, Ac, Ropes, Conduits Etc., As Per Electrical Scope Matrix. , Mechanical Mandatory Spares For Chp ( As Per Annexure-7 Total For Mechanical Mandatory Spares For Chp Conveyor System ------ ( A ) ) , Electrical C& I Mandatory Spares For Chp ( As Per Annexure-7 Total For Electrical C&I Mandatory Spares For Chp Conveyor System ------ ( B ) ) , Electrical C& I Mandatory Spares Common For All ( As Per Annexure-7 Total For Common Electrical C&I Mandatory Spares For All System ----- ( C ) ) , Limestone Handling Plant , Conveyor System ( 1200 Mtph Rated / 1320 Mtph Design, 1200Mm Belt Width, 2 M / S Approx. Speed And & Only For Ls Conv. 5A / B 200 Mtph Rated / 220 Mtph Design, 1200Mm Belt Width, 2 M / S Approx. Speed ) Complete With Idlers ( With Frames, Brackets ) , All Types Of Pulleys With Plummer Blocks And Bearings, Deflector Rollers, Drive Chain System ( Motors, Gear Boxes, All Types Of Fluid Couplings ( Fluid Coupling, Scoop Coupling, Flexible Coupling, Geared Couplings, Other Input And Output Couplings ) , Brakes, Technological Structures, Including Gtu Towers ( Other Than With Tps And Conveyor Trestles ) , Gtu Travel Guide Pipes, Ci Counter Weights ( If Applicable ) , Cradles, Short Supports, Stringers, Stools, Skirt Board And Skirt Rubber, Deck Plates Throughout Conveyor Length , Maintenance Platforms, Inspection Doors, Inspection Stools, Ladders, Bolts, Anchor Fasteners, Templates, External Scrappers, Internal Scrappers, Foundation Bolts & Nuts, Rubber Sealing, Drive Base Frame, Base Plate, Shim Plate Etc. With All Electricals And C&I ( Except For Items Indicated Separately Under Electrical , C&I As Per Electrical Scope ( Section D Of This Spec. ) . , Conveyor System ( 150 Mtph Rated / 165 Mtph Design, 650Mm Belt Width, 1 M / S Approx. Speed ) Complete With Idlers ( With Frames, Brackets ) , All Types Of Pulleys With Plummer Blocks And Bearings, Deflector Rollers, Drive Chain System ( Gear Boxes, All Types Of Fluid Couplings ( Fluid Coupling, Scoop Coupling, Flexible Coupling, Geared Couplings, Other Input And Output Couplings ) , Brakes, Technological Structures, Including Gtu Towers ( Other Than With Tps And Conveyor Trestles ) , Gtu Travel Guide Pipes, Ci Counter Weights, Cradles, Short Supports, Stringers, Stools, Skirt Board And Skirt Rubber, Deck Plates Throughout Conveyor Length , Maintenance Platforms, Inspection Doors, Inspection Stools, Ladders, Bolts, Anchor Fasteners, Templates, External Scrappers, Internal Scrappers, Foundation Bolts & Nuts, Rubber Sealing, Chutes, Drive Base Frame, Base Plate, Shim Plate Etc. With All Electricals And C&I ( Except For Items Indicated Separately Under Electrical , C&I As Per Electrical Scope ( Section D Of This Spec. ) . , Complete Set Of Plough Diverter Feeding The Limestone From 650Mm Belt To Limestone Day Silos Of Capacity 150Tph / 165Tph Along With All Accessories, Chute Work, Plough Actuators And Enclosures For Duct Control. , Inline Magnetic Separators With Belt, Drives, Fixing Lugs, Slings, Fixing Accessories, Tramp Iron Chute Up To Ground Level, Reject Trolley And With All Electricals And C&I Etc. , Metal Detectors Along With All Electricals And C&I For 1200Mm Belt Width , Metal Detectors Along With All Electricals And C&I For 650Mm Belt Width , Suspended Magnet Along With Fixing Lugs, Slings, Fixing Accessories, Tramp Iron Chute, Reject Trolley, All Electricals And C&I. , Belt Weighers Along With All Electricals And C&I. , Chutes With Chute Support Structure, Chute Block Switches In Tps, Crusher House, Reclaim Hopper Complex, Etc. Including Liners In Crusher Supporting Rcc Deck, Tramp Iron Chutes Upto Ground Level And With All Electricals And C&I. , Complete Travelling Tripper With Telescopic Chute & Dust Collector Arrangement, Drives, Flap Gates ( Motorized ) With Actuator, Two- Way Chute, Including Supports, For Each Limestone Travelling Tippler, Including Rails, Rail Fixtures, Clamps And Other All Electricals And C&I, Drives & Accessories. Rated / Design Capacity: - 1200 / 1320 Tph. ( For Drives Geared Motors Are Not Acceptable, So Bidder To Provide Conventional Electro Mechanical Drive I.E. Gearbox, Brake And Motor ) . Drive Rating Shall Be Min. 2 X 50 %. , Complete Limestone Sampling Unit With All Electricals And C&I , 200Tph / 220Tph Bulk Material Receiving Unit Or Box Feeder Or Surface Feeder With Dust Enclosures With All Electricals And C&I , Truck Tippler 60T Gross Capacity With All Electricals And C&I , Flap Gates With Motorized Actuator Including Limit Switches, Fixing Supports, Maintenance Access And All Electricals And C&I. , Rack And Pinion Gates With Actuators, Fixing Supports, Maintenance Access And All Electricals And C&I. , Rod Gates, Fixing Supports, Maintenance Access. , 1000Kg Rope & Sheave Type Passenger Cum Goods Elevator Shall Be Provided Along With Electricals And C&I For Limestone Crusher House. The Elevator Shall Be Designed As Per Clause No 5.17.0 And Data Sheet Of Elevator Of Sub Section-A-23, Of Part B Of Technical Specifications. , Belt Vulcanizing Machine With Tool Kit For 1400 Mm Belt Width With All Accessories, Consumables, Etc With All Electricals And C&I. , Rails & Rail Fixtures For Limestone Paddle Feeder Machine ( 150Tph ) In Lhp Reclaim Hoppers For Paddle Feeder Travel. , Complete Individual Dry Type Dust Extraction System For Following Lhp Buildings Comprising Of Dust Collection Hoods, Ducting & Duct Support, Centrifugal Fans, Stack, Stack Support, Bag Filter System With Sequential Controller, Rotary Air Lock, Bag Filter Support Structure, And Dust Collection Hopper, Including All Structures, Duct Supports, Supporting Structures, Bellows, Piping, Fittings, Gauges, Switches, Other Instrumentations, Valves, Drive Base Frames, Dampers ( Manual & Electrical ) Etc. With All Associated Electricals And C&I. The Extraction Capacity Of Dust Extraction System Shall Be Based On American Conference Of Governmental Industrial Hygienists ( Acgih ) . , De System For Limestone In Ls Jt-1 , De System For Lime Stone In Crusher House Of Limestone , Common De System For Lime Stone In Ls Jt-2 & Bulk Material Receiving / Box Feeder / Surface Feeder Unit , De System For Limestone In Ls Jt-3 , Common Compressed Air System For Lhp Building & Limestone Storage Area De System Comprising Of 2 Sets Of Screw Compressors ( 1W+1S ) To Be Located In Ph-A Complete Compressed Air Piping Network With Valves, Fittings And Air Receivers For Dry De System Along With All Associated Electricals And C&I. , Reversible Hammer Mill Crusher For Limestone, Direct Drive ( No Gear Box Or Belt Pulley Drive Is Acceptable ) With Air Cooled Scoop Coupling, Vibration Isolation System, Hydraulic Door Opening Mechanism Drive Base Frames And Associated Electrical ( Except Ht Motor ) And Control & Instrumentation Equipment Along With Startup And Commissioning Spares. 1200Tph Rated / 1320Tph Design / 1200Tph Guaranteed Capacity. , Vibrating Feeders Before Crusher With Solid Deck With All Electricals And C&I. 1200Tph Rated / 1320Tph Design / 1200Tph Guaranteed Capacity. , Nylon-Nylon Belt For Conveyors ( As Applicable ) , With Splicing Kit As Per Requirement And Specification. , Complete Set Of Plough Diverter For Tapping & Diverting The Limestone Flow From 2000Mm Belt Towards Limestone Crusher House Of Capacity 1200Tph / 1320Tph Along With All Accessories, Chute Work, Plough Actuators And Enclosures For Duct Control. , Electrical & C&I Of All Above Lhp Equipment’S As Per Electrical Scope ( Section D Of This Spec. ) Shall Be Considered Under This Head: Ht Motors, Lt Motors, Trailing / Flexible Cables, All Data Cables / Special Cables, Temperature Transmitters, Power & Control Junction Boxes, All Electrical Panels, All Field Devices, Limit Switches, Speed Control Devices, All Brakes And Clamps With Complete Accessories, Earthing & Lightning, Dcs Logic & Hmi Development Documents, Chp Control Desk, Main Mcc, Lt Bus Ducts, Lt Transformers, Vibration Monitoring System For Crushers, Illumination, Cable Trays & Supports, Hooters, Power Distribution Boards, Plc, Ups, Cable Terminations, Brackets And Structural Steel, Maintenance Tools & Tackles, Ac, Ropes, Conduits Etc., As Per Electrical Scope Matrix. , Mechanical Mandatory Spares For Lhp As Per Annexure-7 Total For Mechanical Mandatory Spares For Lhp Conveyor System------- ( D ) , Electrical C& I Mandatory Spares For Lhp As Per Annexure-7 Total For Electrical C&I Mandatory Spares For Lhp Conveyor System ------ ( E ) , Gypsum Handling Plant , Conveyor System ( 150 Mtph Rated / 165 Mtph Design, 650Mm Belt Width, 1 M / S Approx. Speed ) Complete With Idlers ( With Frames, Brackets ) , All Types Of Pulleys With Plummer Blocks And Bearings, Deflector Rollers, Drive Chain System ( Gear Boxes, All Types Of Fluid Couplings ( Fluid Coupling, Scoop Coupling, Flexible Coupling, Geared Couplings, Other Input And Output Couplings ) , Brakes, Technological Structures, Including Gtu Towers ( Other Than With Tps And Conveyor Trestles ) , Gtu Travel Guide Pipes, Ci Counter Weights ( If Applicable ) , Cradles, Short Supports, Stringers, Stools, Skirt Board And Skirt Rubber, Deck Plates Throughout Conveyor Length , Maintenance Platforms, Inspection Doors, Inspection Stools, Ladders, Bolts, Anchor Fasteners, Templates, External Scrappers, Internal Scrappers, Foundation Bolts & Nuts, Rubber Sealing, Drive Base Frame, Base Plate, Shim Plate Etc. With All Electricals And C&I ( Except For Items Indicated Separately Under Electrical , C&I As Per Electrical Scope ( Section D Of This Spec. ) , Chutes With Chute Support Structure, Chute Block Switches In Tps With All Electricals And C&I. , Flap Gates With Actuators With Supports, All Electricals And C&I. , Nylon-Nylon Belt For Conveyors ( As Applicable ) , With Splicing Kit As Per Requirement And Specification. , Complete Travelling Tripper With Drives, Flap Gates ( Motorized ) With Actuator, Two-Way Chute, Incl. Supports, Rails, Rail Fixtures, Clamps And Other All Electricals And C&I, Drives & Accessories. Rated / Design Capacity: - 150 / 165 Mtph. ( For Drives Geared Motors Are Not Acceptable, So Bidder To Provide Conventional Electro Mechanical Drive I.E. Gearbox, Brake And Motor ) . Drive Rating Shall Be Min. 2 X 50 %. , Belt Sealing Arrangement ( Including Supply Of Belt ) . , Electrical & C&I For All Above Ghp Equipment’S As Per Electrical Scope ( Section D Of This Spec. ) Shall Be Considered Under This Head: Ht Motors, Lt Motors, Trailing / Flexible Cables, All Data Cables / Special Cables, Temperature Transmitters, Power & Control Junction Boxes, All Electrical Panels, All Field Devices, Limit Switches, Speed Control Devices, All Brakes And Clamps With Complete Accessories, Earthing & Lightning, Dcs Logic & Hmi Development Documents, Chp Control Desk, Main Mcc, Lt Bus Ducts, Lt Transformers, Vibration Monitoring System For Crushers, Illumination, Cable Trays & Supports, Hooters, Power Distribution Boards, Plc, Ups, Cable Terminations, Brackets And Structural Steel, Maintenance Tools & Tackles, Ac, Ropes, Conduits Etc., As Per Electrical Scope Matrix. , Ash Handling Plant - Conveyor System , Conveyor System ( 267 Mtph Rated / 294 Mtph Design, 800Mm Belt Width, 2.2 M / S Approx. Speed ) Complete With Idlers ( With Frames, Brackets ) , All Types Of Pulleys With Plummer Blocks And Bearings, Deflector Rollers, Drive Chain System ( Gear Boxes, All Types Of Fluid Couplings ( Fluid Coupling, Scoop Coupling, Flexible Coupling, Geared Couplings, Other Input And Output Couplings ) , Brakes, Technological Structures, Including Gtu Towers ( Other Than With Tps And Conveyor Trestles ) , Gtu Travel Guide Pipes, Ci Counter Weights ( If Applicable ) , Cradles, Short Supports, Stringers, Stools, Skirt Board And Skirt Rubber, Deck Plates Throughout Conveyor Length , Maintenance Platforms, Inspection Doors, Inspection Stools, Ladders, Bolts, Anchor Fasteners, Templates, External Scrappers, Internal Scrappers, Foundation Bolts & Nuts, Rubber Sealing, Drive Base Frame, Base Plate, Shim Plate Etc. With All Electricals And C&I ( Except For Items Indicated Separately Under Electrical , C&I As Per Electrical Scope ( Section D Of This Spec. ) , Conveyor System ( 800 Mtph Rated / 880 Mtph Design, 1200Mm Belt Width, 2.8 M / S Approx. Speed ) Complete With Idlers ( With Frames, Brackets ) , All Types Of Pulleys With Plummer Blocks And Bearings, Deflector Rollers, Drive Chain System ( Gear Boxes, All Types Of Fluid Couplings ( Fluid Coupling, Scoop Coupling, Flexible Coupling, Geared Couplings, Other Input And Output Couplings ) , Brakes, Technological Structures, Including Gtu Towers ( Other Than With Tps And Conveyor Trestles ) , Gtu Travel Guide Pipes , Ci Counter Weights ( If Applicable ) , Cradles, Short Supports, Stringers, Stools, Skirt Board And Skirt Rubber, Deck Plates Throughout Conveyor Length , Maintenance Platforms, Inspection Doors, Inspection Stools, Ladders, Bolts, Anchor Fasteners, Templates, External Scrappers, Internal Scrappers, Foundation Bolts & Nuts, Rubber Sealing, Drive Base Frame, Base Plate, Shim Plate Etc. With All Electricals And C&I ( Except For Items Indicated Separately Under Electrical , C&I As Per Electrical Scope ( Section D Of This Spec. ) .Bidder To Note That For Conveyor Ba Bcn # 5A / B Ht Drive Shall Be Considered Irrespective Of Drive Rating Arrived After Calculation. Ht Motor Shall Be Provided By Bhel As Per Electrical & C&I Scope Matrix And As Mentioned Elsewhere But Bidder To Accordingly Consider Scoop Type Fluid Coupling And Gear Box For Ba Bcn # 5A / B. , Conveyor System ( 2600 Mtph Rated / 2860 Mtph Design, 1800Mm Belt Width, 3.25 M / S Approx. Speed ) Complete With Idlers ( With Frames, Brackets ) , All Types Of Pulleys With Plummer Blocks And Bearings, Deflector Rollers, Drive Chain System ( Gear Boxes, All Types Of Fluid Couplings ( Fluid Coupling, Scoop Coupling, Flexible Coupling, Geared Couplings, Other Input And Output Couplings ) , Brakes, Technological Structures, Including Gtu Towers ( Other Than With Tps And Conveyor Trestles ) , Gtu Travel Guide Pipes, Ci Counter Weights ( If Applicable ) , Cradles, Short Supports, Stringers, Stools, Skirt Board And Skirt Rubber, Deck Plates Throughout Conveyor Length , Maintenance Platforms, Inspection Doors, Inspection Stools, Ladders, Bolts, Anchor Fasteners, Templates, External Scrappers, Internal Scrappers, Foundation Bolts & Nuts, Rubber Sealing, Drive Base Frame, Base Plate, Shim Plate Etc. With All Electricals And C&I ( Except For Items Indicated Separately Under Electrical , C&I As Per Electrical Scope ( Section D Of This Spec. ) , Complete Belt Feeders Under Main Fly Ash Silo 1 To 6 ( 1200 Bw At 1.0 M / S Approx. Speed ) Rated 325Tph / Design 358Tph ( Including Supply Of Belt ) With All Electricals And C&I. , Complete Belt Feeders Under Main Bottom Ash Silo 1 To 3 ( 1400 Bw At 1.6 M / S Approx. Speed ) Rated 650Tph / Design 715Tph ( Including Supply Of Belt ) With All Electricals And C&I. , Complete Belt Feeders In Ba Tp-6 ( 1400 Bw At 2 M / S Approx. Speed ) Rated 800Tph / Design 880Tph ( Including Supply Of Belt ) With All Electricals And C&I. , Belt Weighers ( On Conveyor With 267 Mtph Rated / 294 Mtph Design, 800Mm Belt Width, 2.2 M / S Approx. Speed ) Along With All Electricals And C&I. , Belt Weighers ( On Conveyor With 800 Mtph Rated / 880 Mtph Design, 1200Mm Belt Width, 2.8 M / S Approx. Speed ) Along With All Electricals And C&I. , Belt Weighers ( On Conveyor With 2600 Mtph Rated / 2860 Mtph Design, 1800Mm Belt Width, 3.25 M / S Approx. Speed Along With All Electricals And C&I. , Chutes With Chute Support Structure, Chute Block Switches In Tps, Silo Buildings Etc With All Electricals And C&I. , Complete Set Of Plough Diverter For Feeding Bottom Ash Flow To Bottom Ash Main Silos From 1200Mm Belt Towards Of Capacity 800Tph / 880Tph Along With All Accessories, Chute Work, Plough Actuators And Enclosures For Duct Control. , Flap Gates ( Two Way & Three Way ) With Actuators With Supports, All Electricals And C&I. , Electrical Hoist With All Electricals And C&I. ( All Ash Conveyor Buildings Including Bottom Ash & Fly Ash Main Silo Floors ) , Manual Hoist With Travelling Trolley And Chain Pulley Blocks. , Sump Pumps Including Discharge Piping Valves, Accessories & Support Structure Along With All Electrics And C&I With All Electricals And C&I For Ash Conveyor System. , Nylon-Nylon Belt For Conveyors ( As Applicable ) , With Splicing Kit As Per Requirement And Specification , Electrical & C&I I Of All Above Ahp Conveyor System As Per Electrical Scope ( Section D Of This Spec. ) Shall Be Considered Under This Head: Ht Motors, Lt Motors, Trailing / Flexible Cables, All Data Cables / Special Cables, Temperature Transmitters, Power & Control Junction Boxes, All Electrical Panels, All Field Devices, Limit Switches, Speed Control Devices, All Brakes And Clamps With Complete Accessories, Earthing & Lightning, Dcs Logic & Hmi Development Documents, Chp Control Desk, Main Mcc, Lt Bus Ducts, Lt Transformers, Vibration Monitoring System For Crushers, Illumination, Cable Trays & Supports, Hooters, Power Distribution Boards, Plc, Ups, Cable Terminations, Brackets And Structural Steel, Maintenance Tools & Tackles, Ac, Ropes, Conduits Etc., As Per Electrical Scope Matrix. , Mechanical Mandatory Spares For Ash Conveyors ( As Per Annexure-7 Total For Mechanical Mandatory Spares For Ash Conveyor System ------ ( F ) ) , Electrical C& I Mandatory Spares For Ash Conveyors ( As Per Annexure-7 Total For Electrical C&I Mandatory Spares For Ash Conveyor System ------ ( G ) ) , Type Test Charges, As Per Contract Specifications , Installation Services, Erection & Commissioning, Pg Test , Installation Services For Entire Chp, Lhp, Ash Conveyor System & Ghp Including All Equipment / Systems As Per Scope Defined In Nit Specification Comprising Of Receipt, Unloading, Handling, Transportation & Storage At Site, Construction Of Stores At Site ( Open & Closed ) , Lifting / Shifting To Closed / Open Storage, In-Site Transportation, To Make Approach Road Wherever Required, Round The Clock Security At Open Storage Yard , Closed Storage Shed & Erected Material Till Completion Of Work, Assembly, Complete Erection, Alignment, Carrying Out Pre-Commissioning, Commissioning, Trial Run At Site And Carrying Out Performance Guarantee Tests, Reliability Test Run, Functional / Demonstration Tests At Site ( As Applicable Obtaining Provisional Acceptance Certificate ( Pac ) , Final Acceptance Certificate ( Fac ) And Handing Over Of The Equipment & Systems Under Chp, Lhp, Ash Conveyor System & Ghp Complete With All Accessories For The Total Scope Defined As Per Bhel Nit & Tender Technical Specification, Amendment & Agreements Till Placement Of Order. ( Except For Items Indicated Separately Under Electrical, C&I As Per Electrical Scope ( Section D Of This Spec ) , Receipt At Site, Unloading And Storage Of All Bhel Free Issue Items Like Ht Motor Etc. And Its Erection, Testing & Commissioning. , Construction Of Open Storage Yard And Closed Storage Shed: A. Closed Storage Shed :Construction Of Temporary Closed Covered Storage Shed For Storage & Preservation Of All Supplied Material For This Package ( Including Free Issue Items ) With Minimum Dimension - Length 40M X Width 20M X Height 8M ) With : 1. Brick Wall Construction, Concrete Flooring, Sloped Roof, Rolling Shutter, Rcc Column With Max. Span Of 6 Meters, Rcc Beams At Every 3M Height From Finished Floor Level, Brick Infill Up To Total Height Of Shed Or 2.With Bolted Rcc Column Foundation, Plinth Beams, Concrete Flooring, Steel Structure With Roof Truss And Covered With Color Coated Sheets In All Sides, Rolling Shutters. Windows And Access Doors Shall Be Provided And It Shall Be In The Scope Of Bidder. B. Open Storage Yard: Levelled And Graded Area Will Be Allotted For Construction Of Open Storage Yard Outside Plant Premises At Annex Storage Yard. Bidder Shall Make Ready Open Storage Yard Suitably To Obtain Storage Clearance From Customer. Bidder Shall Also Consider Fencing / Illumination Of Open Storage And Site Fabrication Area As And When Allocated At Site. , Touch- Up Painting At Site After Erection. , Operation & Maintenance ( As Defined In The Enquiry Specification ) , Training Module For Chp, Lhp, Ghp & Ash Conveyor System Comprising Following Aspect: - Product Design , - Basic Design Features - Theory & Principle Of Operation - Latest Technological Trends In Coal Handling Plant And Design Plant Visit - Testing Facilities - Operational Feedback - O&M History / Problems Related To Coal Handling Plant Visit To Manufacturer’S Work - Manufacturing Process Of Coal Handling Equipment Operation & Maintenance Of Plant - Trouble Shooting And Fault Analysis - Familiarization Of Special Maintenance Techniques - Special Tool And Tackles Familiarization , The Contractor Shall Provide Three ( 3 ) Years Of Comprehensive Annual Maintenance Contract Which Will Start After Defect Liability Period ( Defect Liability Period Is Defined In Contract Specifications ) As A Part Of Offer / Bid By The Bidder. This Shall Include Calibration Of Analyzers, Supply / Replacement Of Any Required Sensor / Material ( Including Nucleonic Source, If Applicable For Analyzer Technology, Which Requires Top Up / Replacement Up To Three Year Amc Period ) , Rectification Of Faults Reported ( Within 48 Hours ) , To Keep Analyzer Fully Functional, During Defect Liability Period / Amc Period. In Case Of Nucleonic Type Analyzers, All Regulations Required By Indian Law Including That By Aerb / Other Agencies Will Be Complied By Contractor. All Necessary Arrangements To Get Regulatory Clearances Will Be Responsibility Of Contractor. Ntpc Site Will Provide Necessary Documentation / Noc To Facilitate This Process. Any Other Requirement Related To Aerb Clearances Will Be Discussed & Tied Up Before Award Of Contract. The Contractor Shall Follow All Guidelines Of Aerb / Other Regulatory Agencies For Proper Installation / Operation Of Nucleonic Type Coal Analyzers. , Services Of All Items Indicated Separately Under Electrical , C&I As Per Electrical Scope Matrix Annexure-2 And ( Section D Of This Spec. ) For Chp, Lhp, Ash Conveyor System , Ghp System Including Bhel Free Supplied Items Starting From Its Receipt At Site, Unloading, Lifting / Shifting To Closed / Open Storage , Storage, Shifting To Erection Location, To Make Approach Road Wherever Required, Round The Clock Security Of Closed & Open Storage And Erected Material, Erection, Alignment, Carrying Out Pre-Commissioning, Commissioning, Performance Guarantee Tests, Reliability Test Run, Obtaining Provisional Acceptance Certificate ( Pac ) , Final Acceptance Certificate ( Fac ) And Handing Over Of The Equipment & System Which Is Under The Scope Of Supply And Service Of The Bidder And Bhel Free Supplied Items. Complete E&C For All Electrics, C&I Including Bhel Free Issue Items, Support For Dcs Logic & Hmi Fine Tuning In Line With Control Write Up As Per Annexure-2. , Cif Content Included In The Quoted Price. ( Bidder To Note That This Price Is For Information Only And The Same Will Not Be Added For Arriving At The Grand Total Price For Evaluation. )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Jharkhand View Result →
34.
Educational and Research Institute #8928914 Technical Bid
Supply Of Ion Chamber Based Pressurized Radiation Survey Meter Supply Of Ion Chamber Based Pressurized Radiation Survey Meter , Ion Chamber Based Pressurized Radiation Survey Meter , Ion Chamber Based Pressurized Radiation Survey Meter
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Maharashtra View Result →
35.
Tourism #8648630 AOC
Integrated Development Of Craft Center At Sambalpur- 1 Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stony earth, earth mixed with boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. 2 Additional cost for Extra lift or 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general. 3 Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. 4 Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. 5 Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. 6 R.C.C. work ofM-25 for foundation having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 7 R.C.C. work ofM-25 for plinth beam having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 8 R.C.C. work ofM-25 for beam & column having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 9 Ground Floor 10 R.C.C. work ofM-25 for lintel having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 11 Ground Floor 12 R.C.C. work ofM-25 for roof slab having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 13 Ground Floor 14 R.C.C. work ofM-25 for slope roof having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 15 Ground Floor 16 Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction ofEngineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.) 17 Ground Floor 18 Brick work in foundation and plinth with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. 19 Brick work in superstructure with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. 20 Ground Floor 21 Brick work in superstructure with flyash bricks in cement mortar (1:4) with best quality bricks having crushing strength not less than 75 Kg/cm2 imersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. 22 Ground Floor 23 Providing vitrified tile flooring using double charged vitrified tiles of premium grade having thick of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured /printed series (homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. 24 Ground Floor 25 Supplying, fitting and fixing of double charged vitrified tiles in skirting of premium grade having thickness of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured /printed series (homogeneous) of approved quality, colour of approved quality and size in dadoes in all floors at all heights and riser of steps on 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted Epoxy grout to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge. 26 Ground Floor 27 Providingtile flooringexterior gradevitrified tiles of premium grade 10mm thick conforming to IS 4457 of 300mmx300mm of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. 28 Ground Floor 29 Providing 40cmx40cm sizespecial plain/printed series matt finish ceramic floor tiles of premium grade of approved make having thickness 7mm to 8mm, conforming to IS 13755 for ceramic tileflooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient, grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as directed by the Engineer-in-charge. 30 Ground Floor 31 Providing 30cmx60cm size special plain/printed seriesedge cut ceramic wall tiles of premium grade of approved make having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. 32 Ground Floor 33 Providing 20mm thick and above 0.40 Sqm size granite stone flooring in staircase of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. 34 Ground Floor 35 Providing and fixing in position well dressed, naturally seasoned sal wood rebated frames of size 125mmx63mm to doors including two coats of hot bitumen applied to rear of frame in contact with masonry or concrete surface fixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge 36 Supplying fitting and fixing in position 32mm thick flush door with teak wood beading and 1mm thick sunmica to both side pasted with adhessive including fixing of fixtures like Godrej make Mortice lock having model no 9168, Godrej make Door closure having model no 8340, 100mm aluminium hinges, handle, tower bolt, stopper including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. 37 Providing and fixing in position WPC frames of following approved size to doorsfixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge. 75mm x 50 mm 38 Providing and fixing in position 28mm thick WPC shutters of approved size to WPC door frames with hinges, handles, tower bolt etc complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge 39 Providing and fixing lockable openable system Aluminum works for openable doors applications. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Tex guard coating, silicon coated to suit marine atmosphere. All profiles should be Non insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major accessories should also be made by the same manufacturer. All panels will have no visible hinge or connecting hardware and shall not be connected on any side of the outer frame. The outer frame Depth will be 72mm. All materials which are used should be corrosion-resistant so that they are good functioning in different environments and that there are no negative influences either on the aluminium or on the surface treatment. Glass to be used is 6mm – 8mm toughened, make Saint Gobain. The system should allow the application of glazing or panels with thickness up to 5-8mm. System should have a 10-year warranty on properties, functionality and design, within restrictions defined by technical specifications of anodizing & 1year warranty on wearing parts 40 Providing and fixing Anodized System Aluminum three track Sliding glazed windows of TOSTEM / SHUECO/ ALUMIL make suitable for 2.4 KPA windload with 50mm visible aluminium section width in the centre interlock. The system offered must be ride-in system with two glass panels moving inside the channel without any external overhung along with a provision for mesh panel on the third track. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Texguard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. All Slider doors & windows will be centre locking with integrated Anti-lift in slider panel. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 104 mm +/- 3 mm The bottom frame must use a subframe and no direct grouting will be permitted on bottom frame directly. All glasses will be 5- 6 mm clear toughened.The system should allow glass thickness up to 10 mm. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. 41 Providing and fixing Anodized System Aluminum fixed windows of TOSTEM / SHUECO/ ALUMIL make, suitable for 2.4 KPA wind load. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Tex guard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 72 mm +/- 3 mm. All glasses will be 6 - 8 MM toughened depending on grid size. Beyond 6000 mm width, MS section (size 61 x 122 mm) coupling to be used with cover profiles of same anodized colour. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. 42 Providing and fixing Anodized System Aluminum glass louvers of TOSTEM / SHUECO/ ALUMIL make natural air flow ventilators. The extruded aluminium sections shall be made from Grade 6063- T5 Anodized with Tex guard coating. All other major Accessories should also be made by the same manufacturer. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 50 - 72 mm. System should have a 10-year warranty on properties, functionality and design, within restrictions defined by technical specifications of anodizing & 1-year warranty on wearing parts. 43 Supplying, fitting and fixing of M.S window grills ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damagedwalls/ structures with cement concrete (1:2:4)with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge. 44 Supplying, fitting and fixing of M.S grill gates with top and bottom rails (as per I.S. specification and as per approved drawings) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damagedwalls/ structures with cement concrete (1:2:4)with black hard crusher broken granite stone chips of 12mm to 20mm size (20mm size not to exceeds 25%) including watering and curing etc. complete in all respect as directed by the Engineer in charge. 45 Supplying, Fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90mtr C/Cand stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification buffing polishing etc with cost conveyance taxes of all materials labour T&P etc required for the complete in all respect. 46 Providing & fixing of Greenlam Sturdo Essentia Collection- Serene Restroom Cubicle (of following standard dimension which includes 600mm door size width) self-supporting 12mm thick compact laminates made out of, urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on the finish surface, conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-2005 quality standards with Antivirus, Antibacterial and Antifungal properties (conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards respectively) to fulfil the applicable requirements of indoor air quality certifications for Greenguard-Gold standards. This also includes providing and fixing in position necessary hardware made out of Nylon Polyamide grade 6 & Aluminium alloy grade 6063-T6 powder coated finish in black and other available color hardwares as per manufacturers specifications & Architects instructions like (1) Self closing hinges in Nylon Polyamide grade 6 in gloss finish in available colors (2) Soft closing thumb turn lock made in nylon polyamide grade 6 in gloss finish in available colors (3) Single Coat hook in nylon polyamide grade 6 in gloss finish, available in similar available colors (4) U & F- profiles in Aluminium alloy grade 6063-T6 with powder coating in available colors (5) Nylon polyamide grade 6 Adjustable Leg (6) Top rail along with Nylon Polyamide grade 6 with end cap is a Round D shaped extrusion made of Aluminium alloy grade 6063-T6 with Powder Coating in available colors, (7) Rubber, (8) Screws & wall Plugs (SS316). The top fitting should consist of Matt finish aluminium alloy grade 6063-T6 in avilable colors, which will get fixed on pilasters with SS Screws, All screws will of 316 Grade in stainless steel. All pilasters are supported by grade- 6 Nylorn Polyamide Thermoplastic palm design pedestal footing with non corrosive steel inserts. The base anchored to the floor with grade 316 satin finish stainless steel screws with push fit capping at a clearance height of 150mm. Toilet Cubicle Partitions with standard dimensions of 1995mm Height x 1000mm Width x 1500mm Depth (which includes 600mm door width) 47 Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. 48 Ground Floor 49 Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. 50 Ground Floor 51 Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. 52 Ground Floor 53 Finishing wall surface with Acrylic wall putty to inside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge. 54 Ground Floor 55 Finishing wall surface with Acrylic wall putty to outside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge. 56 Ground Floor 57 Providing and painting two coats with plastic emulsion paint over a coat of primer of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wallsmooth including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. 58 Ground Floor 59 Painting to external surface of building with two coats of weather coat over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. 60 Ground Floor 61 Providing and painting two coats with synthetic enamel paint over a coat of red oxide primer of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. 62 Ground Floor 63 Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge. 64 Ground Floor 65 Providing 20mm. average thick grading plaster with cement mortar of mix (1:4) in all floors at all height with portland slag cement on top of roof slab after chipping and chiseling the same and cleaning the entire surface with wire brush, finished smooth to proper slope and gradient with watering and curing etc. complete including cost, coveyannce, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge. 66 Ground Floor 67 Providing and applying 2 coats of 1mm thick elastomeric cementitious waterproofing coating Brushbond RFX of Fosroc Chemicals Tested to ASTM D4060, ASTM D4541, ASTM D638, ASTM C836. with Adhesion to concrete : >1N/mm2for waterproofing structures like roof slabs, sunken slabs, chajjas, tunnels, water tank etc. after proper surface preparation and soaking the surface with water prior to application complete as specified and directed by the Department at all levels. 68 Providing kota stone flooring using Rajasthan kota stone of approved quality, colour and size of 25mm minimum thick in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the kota stone with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the kota stone, if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. 69 25 mm. average thick artificial stone flooring with cement punning laid to proper slope with cement concrete of proportion (1:2:4) using screened and washed sharp sand for mortar with black hard crusher broken granite stone chips of approved quality and from approved quarry, washed and cleaned laid in two layers i.e. the bottom layer being 19 mm . thick and top layer of 6mm. thick with 12mm. to 20. size black hard crusher brokenstone chips (20mm size chips not to exceed 25%) including chipping and chiseling and cleaning the top surface of the floor slabs in upper floors, including rounding of corners, watering and curing with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge 70 Providing and injecting chemical emulsion for pre - constructional antitermite treatment as per IS specification and creating a chemical barrier in bottom and sides of foundation trenches, top-surface of plinth filing junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and cables etc. complete using approved quality of chemical emulsion of requisite quantity prescribed by the manufacturer as directed by the Engineer-in-charge including cost of all materials and labour taxes etc. complete. (indemnity bond for warranty for 5 years to be furnished) 71 Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. 72 Rolling & compacting to sub grade or formation loosening by cutting earth for 15cm below the sub grade including watering and compacting in layers by PRR, cost & conveyance of required quantity of water, cost of all labour sundries, T & P etc. required for the work to complete in all respect as per specification and direction of Engineer-in-charge. 73 Construction of granular sub-base by providing Close graded Granular subbase Grading-IV material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (5th Revision) etc complete as per direction of Engineer-in-charge. 74 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works 75 Supplying and laying of M40 grade heavy duty factory made hydraulically pressed and mechine vibrated free cast interlocking pavers of 80mm thick, coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge. 76 Providing and laying at or near ground level factory made kerb stone of M-30 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 77 Providing and painting two coats with synthetic enamel paint over a coat of cement primer of approved quality and approved shade confirmming to ISI on cement work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. 78 Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out complete. 79 Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. 80 Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge 81 Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001 82 Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm 83 Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm 84 Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). 85 Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge. 86 Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge. 87 Plastic Waste bin Rectangular alongwith fabricated MS stand with one coat of primer and two coats of enamel paint for stand. MS stand should be grouted properly on the ground level. Capacity-60 350x350 mm Top Dia.250x250 mm Bottom Dia.850 mm Height pair Sintex, Nilkamal, Otto, Aristo 88 Plastic Waste bin without Wheel with Push type Top load along with fabricated MS stand with one coat of primer and two coats of enamel paint for stand. MS stand should be grouted properly on the ground level capacity 60 pair 350x350 mm Top Dia. 250x250 mm Bottom Dia. 850 mm Height Sintex, Nilkamal, Otto, Aristo 89 Plastic Waste bin without Wheel with Swing lid type Top load along with fabricated MS stand with one coat of primer and two coats of enamel paint for stand. MS stand should be grouted properly on the ground level. Capacity-60 pair 350x350 mm Top Dia. 250x250 mm Bottom Dia. 850 mm Height Sintex, Nilkamal, Otto, Aristo 90 Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge of land manure before and after flooding trench with water (excluding the cost of imported earth, sludge or manure). 91 Supplying and stacking of good earth at site (Earth measured in stacks will be reduced by 20% for payment) with all lead and lift. 92 Supplying and stacking sludge at site (sludge measured in stacks will be reduced by 8% for payment) with all lead and lift. 93 Supplying and stacking at site dump manure fromdumping place nearest to site of work.(manure in stack will be reduced by 8% for payment) with all lead and lift. 94 Screened through sieve of I.S designation 20 mm. 95 Screened through sieve of I.S designation 16 mm. 96 Screened through sieve of I.S designation 4.75 mm. 97 Rough dressing the trenched ground including breaking clods. 98 Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of up rooted vegetation with all lead and lift. 99 Fine dressing the trenched ground. 100 Spreading of sludge, dump manure or land good earth in required thickness. (Cost of sludge, dump manure or/and good earth to be paid separately). 101 Mixing earth and sludge or manure in proportion specified or directed. 102 Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge 103 Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. 104 Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 60 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (The manure/sludge shall be paid for separately). 105 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) 106 Holes 60 cm dia, and 60 cm deep 107 Holes 45 cm dia, and 45 cm deep 108 Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. 109 Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm 110 Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid separately.) Size of Empty Pots 35cm Top dia, 25cm Bottom Dia & 35cm Perpendicular height. 111 Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge. 112 Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge. 113 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) 114 Trees Plant 115 Shrubs Plant 116 Hedge Plant 117 Providing and displaying of Aglaonema dove variety Plant, having ht. 30 cm to 45 cm with 8 to 10 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 118 Providing and displaying of Aglaonema Snow-White hybrid plant (three in one), having ht. 30 cm & above with 6 to 8 leaves, bright colour, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot . (Specimen Plant) & as per direction of the officer-in-charge. 119 Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 120 Providing and displaying of Croton Challanger variety plant, having ht. 30cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 121 Providing and displaying of Croton Baby Golden plant (three in one), having ht. 30cm, multi branches, well developed with fresh and healthy foliage in 25 cm size of Earthen pot / Plastic pot. as per direction of the officer-incharge. 122 Providing and displaying of Dracaena Song of India plant (three in one), having ht. 30 cm and above, multibranched, well developed with fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 123 Providing and displaying of Money Plant Broad Leaves mounted on moss stick 90 cm ht., 3 to 4 plants in each pot, well developed with full of fresh & healthy leaves in size of 25 cm Top dia x 18 cm Bottom dia x 25 cm Perpendicular height Earthen pot / Plastic pot . & as per direction of the officer-in-charge. 124 Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 125 Providing and Displaying plants Cladium Hybrid variety 3 to 4 plants in a pot well developed with fresh & healthy foliage 30 to 45 cm ht. in different colour 25 cm Earthen Pot/Plastic Pot and as per direction of the officer incharge. 126 Providing and Displaying plants Cosmos well developed fresh & healthy 20 to 25 cm ht. attractive colours multi branching at blooming stage in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. 127 Providing and Displaying plants Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. 128 Providing and Displaying plants Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. 129 Providing and Displaying Acalypha green plant well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot bushy plant as per direction of the officer-in-charge. 130 Providing and Displaying Bamboo Buddha vally variety with umbrella shape plant having 120 to 135 ht. with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy plant as per direction of the officer-in-charge. 131 Providing and Displaying Fishtail palm plant well developed with fresh & healthy foliage leaves of ht 210 to 240cm Specimen plant in 35 cm Cement Pot as per direction of the officer-in-charge. 132 Providing and Displaying Foxtail palm plant well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge. 133 Supply and stacking of Acacia auriculiformis plant of ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge. 134 Supply and stacking of Adansonia digitata (kalp vricksh) plantof ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge. 135 Supply and stacking of Azadirachta indica ( Neem ) plant of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. 136 Supply and stacking of Bottle palm plant of ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bags. 137 Supply and stacking of Casuarina equisetifolia plant of height 150-165 cm in big poly bags of size 25 cm as per direction of the officer-in-charge. 138 Supply and stacking of Ficus nuda plant of height 120-135 cm. with 6-8 branches and lush green foliage in g. bags of size 25 cm as per direction of the officer-in-charge. 139 Supply and stacking of Nauclea cadamba (Kadam) plant of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.v 140 Supply and stacking of plant Bauhinia acuminata height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. 141 Supply and stacking of plant Ficus panda of height 60-90 cm, with 8-10 branches, and healthy foliage, bushy in big size HDPE bag as per direction of the officer-in-charge. 142 Supply and stacking of plant Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge. 143 Supply and stacking of plant Nerium oleander (kaner) dwarf of height 30-40 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge. 144 Supply and stacking of plant Thuja compacta of height 75-90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge. 145 Supply and stacking of Jasminum humile (Yellow) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. 146 Providing and fixing overhead type sprinkler system with self closing valve type 25mm X 20mm with self closing springmade up ofalluminium alloy and brass fittings including cost of all materials, labour, T & P etc complete as per direction of Engineer-in-charge. 147 Supplying all materials, labour, T&P and fixing 15mm dia CPBib cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. Make: Jaquar/Grohe/Johnson/Roca 148 Supplying all materials, labours, T&P and fitting and fixing of the 20mm dia CPVC pipeconfirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed) 149 TOTAL FOR CIVIL WORKS-(A) 150 PH WORKS 151 Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted European water closet of Hindware make having cat no 20087 or equivalent type of approved make including supply of matching P/S trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. 152 Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china wall mounted European water closet of Hindware make having cat no 20098 or equivalent type of approved make including supply of matching P/S trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. 153 Supply all materials, labour,T&P for fitting and fixing of Pneumatic tank 3/6L with full frame andPneumatic faceplate in polished chrome of Jaquar make having cat no 517444 and 525732 or equivalent type of approved make complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc 32mm dia flush bend, connecting pipe with CP or brass union nuts at each end as per PH specification all complete as per direction of Engineer-in-charge. 154 Supply all materials, labour,T&P for fitting and fixing of dual flush PVC cistern of hindware sleek essence make or equivalent type of approved make complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc 32mm dia flush bend, 15mm dia 450mm long PVC water connecting pipe of jaquar make having cat no ALD 803AB with CP or brass union nuts at each end as per PH specification all complete as per direction of Engineer-in-charge. 155 Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware counter top wash hand basin of size 49cm dia of Hindware make having cat no 10052 or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge. 156 Supplying and fixing urinal of hindware make having cat no 60022/60023 or equivalent type of approved make including all fittings like 450mm long connection pipe of Jaquar make having cat no ALD 803B, waste pipe etc of approved make etc complete as per PH specification and direction of the Engineer-in-charge. 157 Supplying and fixing 12mm thick toughened glazed urinal division plate of approved size with etching and polishing including concrete grouting and edge moulding etc complete as per PH specification and direction of the Engineer-in-charge. 158 Supplying all materials, labor T&P for fitting and fixing in all floors fixed type glass mirror of size 600mm x 450mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge. 159 Supplying all materials, labour, T&P and fixing standard sized15mm dia Concealed Stop cock of Jaquar Cat. No.-FLR 5083NK or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 160 Supplying all materials, labour, T&P and fixing standard sized15mm dia Angular Stop cock of Jaquar Cat. No.-FLR 5053N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 161 Supplying all materials, labour, T&P and fixing standard sized15mm dia pillar cock of Jaquar Cat. No.-FLR 5015 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 162 Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-FLR 5041N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 163 Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD 573 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 164 Supplying all materials, labour, T&P and fixing standard sizedCP towel ring square of Jaquar Cat. No.-ACN-1121N or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 165 Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-ACN-1171N or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 166 Supplying all materials, labour, T&P and fixing standard sizedCP Soap case of Jaquar Cat. No.-ACN-1131N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 167 Supplying all materials, labour, T&P and fixing standard sized liquid soap dispenser of Jaquar Cat. No.-ACN 1135N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 168 Supplying all materials, labour, T&P and fixing standard sizedCP toilet paper holder of Jaquar cat. No.-ACN1153S or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 169 Supplying all materials, labour, T&P and fixing standard sizedCP robe hook of Jaquar Cat. No.-ACN 1191N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 170 Providing all materials, labour,T&P and fittings and fixing of flush valve of Jaquar Cat. No.-PRS 073 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 171 Providing and fixing 6L step can in stainless steel of Kohler make having cat no K-17531T-ST etc complete as per PH specification and direction of the engineer in charge 172 Providing and fixing fragrance disperser of Euronics make having cat no EA44 etc complete as per PH specification and direction of the engineer in charge 173 Providing and fixingcircular type stainless steel grating with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge 174 Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe SDR11 confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed) 175 15 mm dia 176 20 mm dia 177 25 mm dia 178 32 mm dia 179 Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe S-80confirming to IS 13592 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance of all materials all complete as per PH specification and direction of Engineer-in-charge.(Non Concealed) 180 40mm dia 181 50mm dia 182 Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. 183 75mm dia 184 110mm dia 185 Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. 186 110mm dia Single Junction with door 187 110mm dia Double Junction with door 188 110mm dia Cowl 189 110mm dia Plain Bend 190 110mm dia SWR Door Bend 191 125mm x 110mm Gulley Trap 192 110mm dia Tee with door 193 110mm dia Single Junction without door 194 110mm dia Socket Plug 195 110mm dia Pipe clip 196 110mm diaCoupler 197 75mm dia Plain Bend 198 Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Ball Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. 199 25mm Dia 200 32mm Dia 201 40mm Dia 202 50mm Dia 203 Providing & fixing of 50mm dia UPVC body non return valve of approved make with high tensile bress rising stem suitable for the system pressure as per IS specification. 204 Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. 205 Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. 206 Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking SWR/HCI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. 207 Supplying all materials,labours,T&P for cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer-in-charge. 208 Supplying all materials, labour, T&P and fittings and fixing of 1000 LTR Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately) 209 Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm with CI gulley trap, by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 25mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge. 210 Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. 211 150mm dia 212 200mm dia 213 Supplying all materials, labour, T&P and necessary materials towards laying of RCC NP2 Hume pipe push tight joint type (including cost of RCC Hume pipe) inside the pipeline trench of required size with plastic rope without damage to the pipe with all convenience the materials to site and including all taxes all complete as per direction of Engineer-in-charge. 214 150mm Dia 215 200mm Dia 216 Supplying all materials,labours,T&P for constructing inspection chamber of 900mmx800mmx450mm with cement concrete (1:3:6) on bed with hard granite metal size 40mm and flyash brickwork in cement mortar (1:4) in foundation and plinth, 100mm thick RCC M25 cover slab with supplying fitting and fixing of medium duty SFRC manhole cover, moulding and shaping the channel and benching with cement concrete (1:2:4) using 12mm size hg chips,12mm thick cement plaster in cement mortar (1:3) with punning to inside, cement plaster in CM (1:3) to outside the chamber including centring, shuttering, providing required quantity of MS rods and binding wires for reinforcement, bending, binding, tying the grills and placing in the proper position and drawing and design and PH specification including cost, conveyance, royalty, taxes etc for all materials as per the drawing, design and direction of Engineer-in-charge. 217 Construction of circular brick masonary manhole chamber of size 1.20 x 0.90 mtr including cement concrete (1:3:6) in bed by using 40mm size granite metal, brickwork in CM (1:4) in foundation & plinth, cement plastering (1:3) over flyash brick, plastering in CM (1:3) with neat cement punning, CC (1:2:4) over bed for benching and channeling, RCC M25 for roof slab of 150mm thick and supply fitting and fixing SFRC medium duty type cover including cost of centring and shuttering cost of MS rod for RCC work, supplying fitting and fixing of the polypropelen step iron of required interval etc all complete with all cost, conveyance, royalties taxes etc all complete as per direction of Engineer-in-charge. 218 Extra for every additional depth of 0.10mtr or part there of manhole size 1200x900mm from 1100mm to 1650mm depth (data for 0.10 mtr per each) 219 Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stony earth, earth mixed with boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. 220 Extra lift or 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general. 221 Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. 222 Providing and laying in trench cement concrete ( 1:4:8 ) with 40mm size hard granite metal in the following type of bedding for pvc pipes of the following internal diameter including curing complete as per specification (A1-Type Bedding) 223 150mm Dia 224 200mm Dia 225 Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. 226 Supplying and filling the pipeline trench with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. 227 Supplying and construction of 100 user septic tank of standard size as per drawing, design and direction of Engineer in charge. 228 Supplying all materials,labours,T&P and constructing 1.22m dia and 2.1m depth soakway pit with precast RCC rings joined loose,gravel backing in the rear of well steining,precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty etc all complete as per approved specification and direction of Engineer-in-charge. 229 Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: 230 Rocky terrain with boulder formation for 300m depth 231 Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). 232 Supplying 200mm polyvinyl chloride pipes as per ASTM-D-1785-89 schedule 80 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and internal threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes,pipes shall be provided with a groove at the male thread to accomodate flexible PVC/Rubber O ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. 233 Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. 234 Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) 235 Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge 236 Supplying all materials, labours, T&P, fitting and jointing of 80mm dia double flanzed column GI pipe confirming to IS 1239/1968, medium class having IS mark of approved make / tata medium series with socket and screw joint including supply, fitting and fixing of required number of IS certified fitting, cutting threads to pipe and pipes to length including wastage providing necessary offsets and lay screw with extra socket and jam nut including fixing to wall and floors with supply of holder bats, clamps, fixing wooden plugs in walls complete as per direction of Engineer-in-charge. 237 Supply, installation, testing and commisioning of vertical submerssible pump set of approved make having discharge 30m3 per hour and 70mtr head including installation of pump set withwire ropes, clamps etc inside the borewell, etc complete as per the Direction of Engineer-in-charge. (Duty of pump to be decided depending upon yeild of the borewell) 238 Supply, installation, testing and commisioning of automatic star delta control panel suitable for 10HP pumpset including MS box fitted with main switch ,contactor, single phasing preventer, timer, selector switch, voltmetre, ammeter etc and connection with motor inside the borewell complete as per the Direction of Engineer-in-charge. (Excluding power supply and flat cable for connection with motor) 239 Protection to the Borewell with CC base 240 3 core 6.0sqmm copper flat cable 241 Bore Cap 242 Clamp 243 Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe (Sch-80)confirming to ASTM D1785 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance of all materials all complete as per PH specification and direction of Engineer-in-charge.(Non Concealed) 244 80mm Dia 245 65mm Dia 246 Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Ball Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. 247 65mm Dia 248 80mm Dia 249 Providing & fixing of following dia UPVC body non return valve of approved make with high tensile bress rising stem suitable for the system pressure as per IS specification. 250 65mm Dia 251 80mm Dia 252 Supplying all materials & labour, T&P and constructing brick masonary chamber for water sluice valve, single air valve & non return valve with flyash brick masonary in cement mortar (1:4) as per approved drawing and specification CC (1:4:8) with 4cm size hard granite metal on the bed, 12mm cement plaster (1:3) to inside and cement flush pointing (1:3) to outside surface with 100mm thick RCC M25 cover slab with 12mm hg chips using required quantity of tor steel, centring and shuttering to the slab and dismantling it after 31 days of casting, filling the outside cavity with excavated materials, watering, curing including cost, conveyance, taxes of all materials, labour charges for cutting, bending, binding and tying the grills in proper position etc all complete as per drawing, design and direction of Engineer-in-charge. 253 Sluice Valve Chamber (0.75x0.75x1.20mtr) 254 Supplying all materials, labour, T&P, fitting & fixing of different size bourden type pressure gauge of reputed make (0-10 kg/sqcm) with valves, piping, fitting of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and as per the direction of the Engineer-in-charge. 255 Supplying all materials, labour, T&P and fitting and fixing of double air valve confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials, taxes, and duties, transportation charges from store to site etc all complete as per the direction of Engineer-in-charge. 256 INTERNAL ELECTRIFICATION WORK 257 TRAININING ROOM AND SKILL DEVELOPMENT CENTER 258 Wiring 259 Wiring to light points/fan point/exhaust fan point/Call bell point with 1.5-sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non metalic PVC flexible condute with 6Amp, 250V Modular Switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ KEI) 260 Primery point 261 Secondary point 262 Call bell point 263 Wall bracket fan/Air circulator point specification same as above. 264 Exhaust fan point specification same as above. 265 Ceiling fan point consisting of modular regulator of Legrand make model name Myrius or equivalent on existing switch board 266 Supply and fixing of 6Amp plug with 6amp switch on existing board (Modular type ISI marked) 267 Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch, phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. (convinient power) (Make of wire-Finolex/ L&T/ Anchor/ Havells/ KEI) 268 Supply and fixing of ISI marked modular type 2nos 6Amp plug with switch on suitable size of metal box and modular cover in fronton surface or recess including all conection. 269 Supply and fixing of ISI marked modular type 1nos 6Amp plug with switch and 1nos 16Amp plug with switch on suitable size of metal box and modular cover in fronton surface or recess including all conection. 270 Supply and fixing of modular metal box on surface or recess with suitable size of modular cover in front including providing an fixing of ISI marked 16Amp plug with switch with all conection. 271 Supply& fixing of Modular type 25 Amp one way switch and socket outlet for AC point with metal box and modular cover. 272 Recessed/surface extra lead submain wiring alongwith earth wire with the folowing size of PVC insulated single core multistrand coper conductor of ISI marked conforming to IS 694/1990 in 20mm dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required (Make of wire-Finolex/ L&T/ Anchor/ Havells/ Great White/ KEI) exceeding to Long point in 2x1.5sqmm + 1x1.5sqmm. 273 Submains: 274 Recessed/surface submain wiring alongwith earth wire with the following size of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in required dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ Great White/ KEI) 275 2 x 2.5 sq.mm. + 1 x 1.5 sq.mm. 276 2 x 4.0 sq.mm. + 1 x 1.5 sq.mm. 277 2 x 6.0 sq.mm. + 1 x 2.5 sq.mm. 278 4 x 4.0 sq.mm. + 2 x 2.5 sq.mm. 279 4 x 6.0 sq.mm. + 2 x 2.5 sq.mm. 280 4 x 10.0 sq.mm. + 2 x 4.0 sq.mm. 281 CONTROL PANELS : 282 Supply, delivery, installation, testing & commissioning of L.T. Indoor floor / wall mounted typeDistribution Board made out of 2 mm thick CR sheet metal cubiclewith front side hinges glass door for every meter compartment, the cabinet have a common bus bar, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp & vermin proof powder coated; having hinged door and compartmental arrangement for eachequipment& busbar chamber onthe top of the panel; having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-Charge.All MCCB shall confirm to IEC- 60947 and IS-13947. MCCB shall comply with the isolation function requirement of IEC-60947-2 section 7.1.2 to be marked as suitable for isolation / disconnection to facilitate safety of person in use. All MCCB have Ics=100% Icu and the overload setting should be from 0.7 to 1 times of Ir for thermal magnetic release and for microprocessor release the overload Settings: 0.4 to 1 times of Ir. Manually closing mechanism should be accommodated in a Moulded housing of robust and vermin-proof construction. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open) . The tripping devices shall be ambient temperature compensated type. The insulating case shall be made of high strength heat resistant and flame retardant thermosetting insulating material. 283 MAIN PANEL (TRAININING ROOM AND SKILL DEVELOPMENT CENTER). Incoming - (MCCB: 1 No 250A (36kA) 4P thermal magnetic(TM) release with ROM & spreader links. SPD: 1No 50kA 4P T1+T2. MCB C: 1 No 63A 10kA 4P.CHANGE OVER SWITCH: 1 no 250A 4P On Load Change OverSwitch.); Outgoing -(Busbar: 2 SET, 4Nos 320 Amp Copper Strips. (CD=1.6A/sqmm). MCCB: 4 Nos 100A (16kA) 4P thermal magnetic(TM) with ROM & spreader links for DB Training Room & Skill Development Center, DB Community Hall, OAT & Spare. MCCB: 5 No 63A (16kA) 4P thermal magnetic(TM) with ROM & spreader links for Pump Room, STP DB, External Light Feeder Panel, Solar Input & Spare.); Instruments - (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 284 DB TRAININING ROOM AND SKILL DEVELOPMENT CENTER (TRAININING ROOM AND SKILL DEVELOPMENT CENTER).Incoming- MCCB: 1 No 80A (16kA) 4P thermal magnetic(TM) release with ROM & spreader links. CHANGE OVER SWITCH: 1 no 100A 4P On Load Change OverSwitch); Outgoing - [Busbar: 2 SET, 4Nos 100 Amp Copper Strips. (CD=1.6A/sqmm). MCB C 3 Nos 40/63A 10kA 4P for 4 Way TPN BDB for Power & Spare. MCB C 3 Nos 32A 10kA 4P for 4 Way TPN BDB for Light & Spare. MCB C 3 Nos 40A 10kA 2P for SPN BDB/ SPARE]. Instruments - (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 285 Distribution Board COMMUNITY HALL:Incoming - (MCCB: 1 No 80A (16kA) 4P thermal magnetic(TM) release with ROM & spreader links. CHANGE OVER SWITCH: 1 no 80A 4P On Load Change OverSwitch); outgoing - [Busbar: 2 SET, 4Nos 100 Amp Copper Strips. (CD=1.6A/sqmm). MCB C 3 Nos 40/63A 10kA 4P for 4 Way TPN BDB for Power & Spare. MCB C 3 Nos 32A 10kA 4P for 4 Way TPN BDB for Light & Spare. MCB C 3 Nos 40A 10kA 2P for SPN BDB/ SPARE]; Instruments- (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 286 Distribution Board OAT:Incoming - (MCCB: 1 No 80A (16kA) 4P thermal magnetic(TM) release with ROM & spreader links. CHANGE OVER SWITCH: 1 no 80A 4P On Load Change OverSwitch); Outgoing -[ Busbar: 2 SET, 4Nos 100 Amp Copper Strips. (CD=1.6A/sqmm). MCB C 2 Nos 40/63A 10kA 4P for 4 Way TPN BDB for Power & Spare. MCB C 2 Nos 32A 10kA 4P for 4 Way TPN BDB for Light & Spare. MCB C 2 Nos 40A 10kA 2P for SPN BDB/ SPARE. MCB C 8 Nos 32A 10kA 2P for Power Cercuit/SPN BDB/ SPARE]; Instruments- (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 287 Supply, delivery, installation, testing & commissioning of L.T. indoor floor/ wall mounted type distribution boards made out of reputed company IP 43 - #IK 09 with metal door having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge. 288 4way TPN BDB for Light: Incoming - (1 no of 25A 30mA 4P RCCB); Outgoing-(12 nos of 6-16A SP MCB C) 289 4way TPN BDB for Raw Power: incoming - (1 no of 63A 4P MCI); Outgoing - (12 nos of 10-32A SP MCB) 290 12 way SPN BDB: incoming- (1 no of MCB C 32A (10kA) 2P); Outgoing- (10 nos of 6-10A SP MCB C. Cable Laying) 291 Supply, laying & testing of following size of PVC insulated, PVC sheathed, round armoured aluminium conductor power cable of 1100 volt grade laid on surface of wall / column / existing RCC / stone ware / masonry cable trench / cable trey / through G.I. pipe / hume pipe as the case may be, including cost of saddles / clamps / markers etc but excluding the cost of G. I. pipe / hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge. 292 4 core x 240 sqmm A2XFY 293 4 core x 25 sqmm A2XFY 294 Cable termination: 295 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required complete as per the direction of Engineer-in-charge. 296 4 core x 240 sqmm A2XFY 297 4 core x 25 sqmm A2XFY 298 Earthing 299 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required and as per the direction of Engineer in charge. 300 Providing and fixing of 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 301 Providing and fixing 4.00 mm dia hard drawn bare copper wire on surface or in recess for loop earthing as required. 302 Fittings & Fixtures 303 Supply,installation, testing & commissioning of following types of light fixtures directly on wall / ceiling of building with allaccessories such as drivers, lamps cover etc complete assembly including supply of all accessories and making connection from the suitable point outlet complete as per the direction of Engineer-in-charge. 304 22 watt LED extruded aluminium batten for continuous operation and available in 4ft run length, suitable for surface, wall & conduit mounting (with accessories) similar to make ‘Signify’ Cat no. BN021C LED22S complete. 305 12 watt LED extruded aluminium batten available in 2ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting (with accessories) similar to make ‘Signify’ Cat no. BN 021 LED12S 6500 complete. 306 Inverter type 9 watt LED Bulb on existing holder of approved make 307 12 watt LED, Brightest metal surface light with 100lm/W light output, Full low diffusor allows for wider light spread of 270 degrees, Aluminum die cast housing for better heat dissipation, Longer life of 30,000 hours^, Super slim design with a height of just 38mm allowing the product toblend seamlessly with the ceiling, Surge protection of 3kV with wide voltage protection of 160-360V similar to make Philips model name Metal FullGlow complete. 308 65-70 watt Highbay LED efficacy of 150Lm/W with its robust housing design and cater to diverse applications with multiple options of beam angles and suitable for surface mounting (with accessories) similar to make ‘Philips’ Cat no. BY515P LED100S 5700 complete. 309 36 watt SmartGlow is an intelligent office lighting recessed luminaire with built in PIR occupancy sensor offering flexibility of auto switching off when the space is not occupied similar to make Signify Cat no.RC383B P LED 36S complete. 310 5 watt recessed mounted down light, Decorative finish downlighter with hallmark silver ring for beautiful aesthetics, Ultra thin trim for a seamless fit, High lumen efficiency, Aluminum housing for better performance, Designed for robustness: wide voltage protection from 160V-360V, Surge protection up to 2.5kV similar to make Philips model Aura StylEdge complete. 311 7 watt recessed mounted down light, Decorative finish downlighter with hallmark silver ring for beautiful aesthetics, Ultra thin trim for a seamless fit, High lumen efficiency, Aluminum housing for better performance, Designed for robustness: wide voltage protection from 160V-360V, Surge protection up to 2.5kV similar to make Philips model Aura StylEdge complete. 312 10 watt LEDTrack light, Long-lasting fixture, Robust metal construction, Functional, minimal design, Perfect fit for any home/outlet, Wide voltage protection from 160V–360V and surge protection up to 2KV, Premium white aluminium housing,No harmful UV radiation similar to make Philips Stanchion Track Light model no.31445 complete. 313 Track fo installation of track light similar to make Philips Stanchion Track model no 31442 complete. 314 48-50 watt LED Suspended 50mm aluminium extruded linear lighting luminaires with superior white powder coated finish (with accessories) similar to make ‘Philips’ Cat no. SP780P LED52S-6500 complete. 315 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, Ceiling Fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. Canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required similar to make Crompton Cat no. Energion HS - 5 Star BEE complete. 316 Supply, delivery, installation, testing & commissioning of single phase 400mm sweep wall mount fan similar to make Crompton Cat no. WM Hiflo Wave Plus complete. 317 Supply, delivery, installation, testing & commissioning of wall mounted air circulator 750mm sweep (Crompton make model nameAC750WALL / Havells/ Bajaj) 318 Supply, delivery, installation, testing & commissioning of single phase 600mm sweep 900 RPM heavy duty Exhaust fan(Crompton make cat no EXHD600-6-1/ Havells/ Bajaj) 319 Supply, installation, testing & commissioning of metal Exhaust Fan 300mm sweep similar to make ‘Crompton’cat no Trans Air 12 complete. 320 Supply, delivery, installation, testing & commissioning of plastic Ventilation fan 150mm sweep similar to make Crompton cat no Brisk Air Neo 6 complete. 321 Supplying and fixing Call bell Buzzer suitable for single phase, 230 volts, 1 Module of similar to make Legrand Myrius Cat no. 6792 50 complete. 322 Supply and fixing circular / hexagonal G.I. box for ceiling fan hook, of internal dia 140 mm, 75 mm height, top lid of 1.5 mm thick G.I. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the G.I.box by means of 3.3 mm dia round headed screws, one lock at the corners. Hook shall be made of 10 mm dia galvanised M.S. bar bent to shape as per standard drawing. 323 Providing and fixing extra down rod of 20 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required. (more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored.) 324 Testing, commissioning and charging of entire wiring system for TRAININING ROOM AND SKILL DEVELOPMENT CENTER. 325 Testing, commissioning and charging of entire wiring system for COMMUNITY HALL. 326 Testing, commissioning and charging of entire wiring system for OAT GREEN ROOM. 327 EXTERNAL ELECTRIFICATION (100kVA SUB-STATION) WORK 328 CABLING WORK 329 Supply of following size of PVC Armoured cables ISI marked. 330 4 core x 150 sqmm A2XFY 331 Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. 332 4 core x 150 sqmm A2XFY 333 Cable Trench & Hume Pipe 334 Construction of cable trench of size [1000mm(W) x 1000mm(D)] complete , base foundation with C.C 1:3:6, 250mm brick walls,filling the inside area with sand, removableRCC slab for chambers with C.C 1:2:4 on the top, wall and top plastering etc complete as per the approved drawing 335 Construction of cable trench of size [600mm(W) x 1000mm(D)] complete, base foundation with C.C 1:3:6, 250mm brick walls,filling the inside area with sand, removableRCC slab for chambers with C.C 1:2:4 on the top, wall and top plastering etc complete as per the approved drawing. 336 Supply, delivery and laying of floowing sizes of RCC Hume pipe at a depth of 1000mm Ground level for cable laying as required including cost of all accessories, jointing, masonry inspection chamber at both ends etc completeas per direction of Engineer-in-charge. 337 150mm dia RCC Hume pipe 338 250mm dia RCC Hume pipe 339 TRANSFORMER INSTALLATION WORK 340 Supply & fixing CT meter sheet steel enclosures made out of 16 gauge CRCA sheet ,double door with lock, neopraene gasket all around, two numbers earth lugs including painting ,padlock arrangement. Class 0.5 with O/P burden of 30VA 341 Supplying and erection of 150X 150 RS joist pole of 11m long. (30.6 kg /mtr). 342 Supply installation and commissioning of 200Amp 11kv on load isolated air brake switch with braking capacity of 10kA complete with following accessories. Knife blade switches both Male/Female. Operating GI pipe with handle & rotating mechanism. Pad locking arrangement with pad lock. Scope also includes interconnecting AB switch OH line with 30sqmm AAC conductor & interconnection to pin insulator/HG fuse set by suitable Cu flexible strip .Spring earth of the handle ,earthing of switch etc. 343 Supply installation and commissioning of 11kV home gap fuse set on the double pole structure. The 11KV HG fuse set to be complete with 11KV insulators Cu horn gaps etc. The scope also includes interconnecting the HG fuse with transformer with 0 SWG HDB Cu conductor. (11KV, 200Amp, 3Pole) 344 Supply installation and commissioning of 11KV lighting arrester including interconnection by 30sqmm AAC conductor & clamp(12KV, 5KA) 345 Supply and fixing of substation bracket inj complete set. With 100x50x6 mm for MS channel, 75x40x6mm MS channel for AB switch and HG fuse, 50x50x5mm MS angle for Transformer (140Kg) including painting. 346 Supply installation and commissioning of 11KV Disc Insulator 90 KN (B & S type) 347 Supply & fixing of11 KVDisc hard ware fittings (in pairs) 348 Supply installation and commissioning of HT Stay set with complete accesssories like Anchor rods, insulators, bow eye bolts and stay wires. Scope inclusive of supply of stay clamps. 349 Supply of materials and installation of pipe earth electrode made out of 40mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ terminationofG.I. flat / wire withG. I. nutbolts& washers including cost of charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCCcover complete with labour for excavation of pitinall kinds of soil & rock as required and as per direction of Engineer-in-charge. 350 Supply of materials and installation of chemical earthing size of chemical earth bar 3 mtr, size of earth pit 3 X 2 X 9 chemical compound to be used 50 kg. There is an arrangements forterminationofcopper strip of earth continuity conductor including cost of water pouring arrangements, brick masonary enclosure on top with removable cast iron cover complete with labour for excavation of pitinall kinds of soil & rock as required and as per direction of Engineer-in-charge. 351 Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required. 352 Supplying and laying 25 mm x 5mm G.I. strip on surface or in recess for connection etc as required. 353 Supply & fixing ofGInuts, bolts & washer of assoarted size for above work. 354 Supply installation and commissioning of 100 KVA, 11/0.4KV (AL) Transformer with tap changer, BIS Energy level-II with necessary hardware including unloading from truck, leading to the pole/plinth location and EMR test etc as required. 355 Supply & providing of 11K GI pin & pin insulators 356 Providing and binding with aluminium binding wire for all type binding for transformer installation work. 357 Supplying and painting with Aluminium Paint where ever required for transmission line. 358 Supplying and painting with Black paint where ever required for transmission line. 359 Supplying and painting with Redoxide paint where ever required for transmission line. 360 Supply installation and commissioning LT Distribution Panel Board for 100KVA Transformer with MCCB, Aluminium Busbar for two Bay with Kitkat Fuse. 361 Supply installation and commissioning LT Busing cover in the LT site of the transformer 362 Supply and construct with all material for Boundary wall for fencing and anti climbing with M.S. Gate 5-0 x 8-0.Sand & Gravel spreading over the entire area. 363 Supply and construct with all material for plinth of size 5-0x5-0x6-0. 364 11 KV Single Circuit line 365 Supplying and erection of 150X 150 RS joist pole of 11m long. (30.6 kg /mtr). 4 nos 366 Supply & fixing of(100 x 50 x 6)mm M.S Channel 367 Supply & fixing of11 KV V cross arm. 368 Supply & fixing of 11 KV top chanel.. 369 Supply & fixing of back clamp for cross arm 370 Supply & providing of 11K GI pin & pin insulators 371 Supply installation and commissioning of 11KV Disc Insulator 90 KN (B & S type) 372 Supply & fixing of11 KVDisc hard ware fittings (in pairs) 373 Supply installation and commissioning of HT Stay set with complete accesssories like Anchor rods, insulators, bow eye bolts and stay wires. Scope inclusive of supply of stay clamps. 374 Supply & installation of coil earthing 375 Supply & fixing ofassoarted nuts, bolts & washer for above work. 376 Providing and binding with aluminium binding wire for all type binding for transformer installation work. 377 Supply & stringing with 80mm² insulated AAA Conductor. 378 Supplying and painting with Aluminium Paint where ever required for transmission line. 379 Supplying and painting with Black paint where ever required for transmission line. 380 Supplying and painting with Redoxide paint where ever required for transmission line. 381 Garding 382 Supply & fixing of(75 x 40 x 6)mm M.S Channel 383 Supply & fixing of No 8 G.I wire 384 Supply & fixing ofeye hook 385 SAFETY EQUIPMENTS & OTHER: 386 Supply and hanging of Shock Treatment Chart duly Laminated. 387 Supply & Laying of 8 mm Thick Rubber Mat (1mtr x 2mtr), ISI mark of 1100 V Grade. 388 Supply and Installation of 4 Nos. Fire Buckets on a Mild Steel Stand complete as per specification and requirement of Fire Safety Provisions. 389 Supply and Installation of 4.5 Kgs. Capacity CO2 type Fire Extinguisher complete as required. 390 Providing and fixing bi-lingual Danger HT notice board of 250mmx200mm as specified below,made of mil;d steel at least 2mm thick & vitreous enamelled signal red color on both sides as background & with insprictions in enamelled vitreous white color on front side for lettering as required. 391 Supply of First Aid box with all required accessories. 392 EXTERNAL ILUMINATION 393 Feeder Panel with timer 394 Supply, delivery, installation, testing & commissioning of L.T. Indoor floor / wall mounted typeDistribution Board made out of 2 mm thick CR sheet metal cubiclewith front side hinges glass door for every meter compartment, the cabinet have a common bus bar, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp & vermin proof powder coated; having hinged door and compartmental arrangement for eachequipment& busbar chamber onthe top of the panel; having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-Charge. Incoming: 1 no 63A 4P MCCB (16 KA) type followed by 1 No 63-A 4 NO power contactor with Bypass Toggle switch & timer. Bus bars: 4 Nos.20x3mm E C Strips. Outgoing: 4 Nos 40/63-A, 4P MCB C (10kA). 4 nos 40/63 Amp 2P MCB C (10 KA).Complete duly factory wired as per SLD. Cable & wires 395 Junction Box 396 Supply, installation and testing ofCable Junction Boxes IP 66/67 “weather proof”, for outdoor installation with terminals, made of high quality Thermoplastic for cable size 10-16sqmm and box size 155mm x 210mm x 92mm (Hensel make or equivalent) 397 CABLES & ACCESSORIES 398 Supply, laying & testing of following size of PVC insulated, PVC sheathed, round armoured aluminium conductor power cable of 1100 volt grade laid on surface of wall / column / existing RCC / stone ware / masonry cable trench / cable trey / through G.I. pipe / hume pipe as the case may be, including cost of saddles / clamps / markers etc but excluding the cost of G. I. pipe / hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge. 399 3c x 2.5 Sq. mm flexible Copper cable for connection of lamp from JB 400 2c x 6 Sq. mm Aluminum armoured cable. 401 4c x 10 Sq. mm Aluminum armoured cable. 402 4c x 16 Sq. mm Aluminum armoured cable. 403 Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. 404 Supplying and fixing of following dia ISI marked HDPE pipe with material grade PE-80 in ground/recess including excavation the earthl and making good the same in case of recessed conduit as required. 405 40mm OD PN-8, 3 mm thick 406 90mm OD PN-4, 3.5 mm thick 407 110mm OD PN-4, 4.3 mm thick 408 Supply, delivery and laying of floowing sizes of RCC Hume pipe at a depth of 1000mm Ground level for cable laying as required including cost of all accessories, jointing, masonry inspection chamber at both ends etc completeas per direction of Engineer-in-charge. 409 150mm dia RCC Hume pipe 410 Fittings & Fixtures 411 Supply of 7meter long aesthetically designed QUADRA MAST light pole. Pole shall made up of Hot Dip Galvanized Body andcoated with zinc rich primer & pure polyester powder coatingand finished with jet black colour and 3 coat Marine grade. The pole shall be suitable for fitting of 4nos of 100W rectangular design street light made up ofExtruded aluminium body and Clear toughend glass diffuser. Dimension of light must be 607 x 200 x 230mm. Body size of the pole will □150mm from bottom and 100mm size from middle to top. The Pole shall have base Plate□300 x 16mm thick with provision for founation bolt fittings. Pole is Compatible for 70mm size for cable entry & exist. Junction Box service door is made up cast aluminium of size 325 X 90mm and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 4pole studd connector for loop-in loo-out arrangement with all materials & labour as required as per the direction of Engineer-in- Charge.(Make: K -lite Pole KP-2042-700 + KL-4461 Luminaries/ equivalent ). 412 Supply of 3 meter long aesthetically designed decorative lighting pole with 400mm height Cast Aluminium base, cast aluminium ring on the middle portion. Pole shall be made up of Mild Steel Body and coated with zinc rich primer & pure polyester powder coating of black with gold embellishment finish. Bottom dia of the pole will be Ø139.7mm, Middle portion dia will be Ø76.1 mm and having base Plate of size □200 x12mm thick with provision for founation bolt. Pole is Compatible for Ø70mm size for cable entry & exist. Junction Box service door is made up cast aluminium and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 32A 4pole terminal connector for loop-in loo-out arrangement with all materials & labour as required as per the direction of Engineer-in- Charge. (Make: K -lite Florian Pole KP- 4329/ equivalent). 413 Supply of 50W LED Post Top Light made up of Die Cast Aluminium base with spun aluminium top cover Body with clear Acrylic diffuser and having Dimension : Ø400 x 807 protected with IP 65, Surge Protection : 6KV, THD : <10% (Make: K -lite Imperial KL- 5444/ equivalent). 414 Supply, delivery, installation and testing of 4000mm long 100mm dia quadra extruded aluminium alloy pole with LED 45 watt post top light and foundation bolt and all fixing acessories with required size of rcc foundation as per direction of Engineer-in-charge. (K-Lite Pole cat noKP-5052, K-Lite Fitting cat no KL-5436 or equivalent),Pole made of extruded aluminium alloy (grade 6063) can achieve high strength and corrosion resistance in various atmospheric conditions, Pole design parameters vary depending on the type of bracket and loading factor, All pole sections are welded using special v groove technique by certified welders using high end MIG welding processes, The control gear tray is prewired with MCB, terminal connectors for loop-in / loop-out arrangement.Built-in control box with service Can be Integrated with LED Modules. door including lock and safety chain (except 200 x 50).Earth connection. Safety class I, CE-Conformity mark,BIS - Conformity mark. 415 Supply, delivery, installation and testing of 8w LED Bollard 100mm dia 1000mm long for uniform illumination for pathways with required size of cc foundation as per direction of Engineer-in-charge. (K-Lite cat no KL-4823/ Ligman/ Simes/ Unilamp/ equivalent). Luminaire made of extruded aluminium alloy (grade 6063) with die-cast aluminium components and non corrosive SS fasteners. Reflector system made of die-cast / spun aluminium. Non yellowing UV stabilized polycarbonate clear / translucent diffuser, Silicone gasket.Cast Iron / aluminium mounting plate with an anchorage unit made out of hot dip galvanised steel for extra guarantee against corrosion. Luminaire can be aligned on the mounting plate around 360°. Cast Iron / aluminium mounting plate with an anchorage unit made out of hot dip galvanised steel for extra guarantee against corrosion. Luminaire can be aligned on the mounting plate around 360°. Cable entries for through-wiring of mains supply cable. Protection class IP54 / IP65. Integral power supply. Earth connection. Safety class I. CE-Conformity mark. BIS - Conformity mark. Suitable for operation on 240V, 50Hz single phase ac supply.
Contract Date: Jan 23, 2026 Contract Value : ₹ 6.76 Crore
Government Departments No of Bidders 11
Odisha View Result →
36.
Science and Technology #8576174 AOC
Bids Are Invited For Radiation Survey Meter (Q3) Total Quantity : 1
Contract Date: Ref. Documents Contract Value : ₹ 1.06 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
Tamil Nadu View Result →
38.
Power #8568308 AOC
Bids Are Invited For Radiation Survey Meter (Q3) Total Quantity : 1
Contract Date: Ref. Documents Contract Value : ₹ 66,862
Boards / Undertakings / PSU No of Bidders 7
Karnataka View Result →
39.
Educational and Research Institute #8562798 AOC
PROCUREMENT OF EQUIPMENTS, INSTRUMENTS, MACHINERIES, TOOLS ETC. FOR RATUA S.N.BOSE GOVT. POLYTECHNIC, RATUA, MALDA , Architecture Department , Laser Distance Meter , Software , Colour Plotter(A0) , Colour Printer, Laser Jet (A3) , Laptop , Civil Engineering Department : , Geometry Box Wooden For Teacher For Black Board With Brass Fitting , 3D Solid Geometry Shape Set Of 16 Pieces Size 7.5X5x5 Cm With Wooden Slide Box , Universal Testing Machine Computerised, Capacity, 1000 Kn, 6 Pillar Type With Hydraulic Jaws With Nabl Calibration , Standard Sand Conforming To Is :650-1991 , Standard Sand Conforming To Is :650-1991 , Standard Sand Conforming To Is :650-1991 , Vernier Calliper , Le-Chatelier Flask , Compacting Factor Apparatus , Machine Operated Flexure Testing Machine (Concrete) , Rebound Hammer Apparatus (Schmidt Hammer) , Ultrasonic Pulse Velocity Apparatus , Concrete Beam Mould , Scoop For Concrete , Scoop For Chemical , Trowel Set Of Different Size , Aggregate Crushing Value Apparatus (150Mm)Is : 9376-1979 , Length Comparator With Digital Dial Guage , Standard Penetrometer For Bitumen , Pensky Martens Flash Point (Closed) Tester (Electrically Operated) With Energy Regulator , Flakiness Index Gauge , Elongation Index Gauge , Plain Table Survey Set With Stand Along With All Accessories , Plain Brass Alidade , Plumb Bob , Wooden Mallet , Wooden Pegs , Lime , Density Bottle , Mixing Bowl Of Porcelain Material , Gypsum Mixing Spatula , Induction Oven , Infrared Moisture Balance For Laboratory , Dessicator , Soil Core Cutter Set Along With Rammer , Steel Sampler , Aluminium Trays , Spade(Tata Make)With Handle , Pick Axe (Tata Make) With Handle , Shovel (Tata Make) With Handle , Crucibles (Porcelain)-15Ml Capacity , Crucibles (Porcelain)-30Ml Capacity , Crucibles (Porcelain)-50Ml Capacity , Crucibles (Porcelain)-100Ml Capacity , Palette Knife Set , Straight Edge 3M Ss , Filter Paper , Fire Extinguishers , Set Of Safety Banner , Screw -Driver Set , Hammer Set Of Different Size , Piler Set , Apron , Lab Goggles , Rubber Gloves , Electrical Engineering Department : , Experiment Set Up To Measure Solar Radiation Using Pyranometer On Tilted Surface At Different Angles Of Inclination And Plot Radiation Vs. Time Characteristics For Certain Duration.(For Renewable Energy Power Plants Laboratory Refers To Practical No. 1 Mentioned In Syllabus Of Diploma In Electrical Engineering (Ee)Part-Ii(4Th Semester)Revised 2022) , Perform Experiment To Plot I-V Characteristics Of Photovoltaic Cell Module And Find Out The Solar Cell Parameters (O.C,Voltage,Short Circuit Current-Power Point, Fill Factor, Efficiency).(For Renewable Energy Power Plants Laboratory Refers To Practical No.2 Mentioned In Syllabus) Of Diploma In Electrical Engineering (Ee) Part- Ii (4Th Semester)Revised 2022 , Study Different Parts Of A Solar Flat Plate Collector /Solar Concentrating Collector (For Renewable Energypower Plants Laboratoryrefers To Practical No. 3 Mentioned In Syllabus Of Diploma In Electrical Engineering (Ee)Part-Ii (4Th Semester)Revised 2022) , Perform Experiment To Measure Thermal Performace Of A Solar Water Heating System.(For Renewable Energy Power Plants Laboratory Refers To Practical No.4 Mentioned In Syllabus Of Diploma In Electrical Engineering (Ee) Part-Ii (4Th Semester)Revised 2022) , Perform Experiment To Measure Thermal Performace Of A Solar Cooker With Varying Reflector.(For Renewable Energy Power Plants Laboratory Refers To Practical No.5 Mentioned In Syllabus Of Diploma In Electrical Engineering (Ee) Part-Ii (4Th Semester)Revised 2022) , Identify & Study Different Components Of Solar Street Lighting System For Ac Supply. (For Renewable Energy Power Plants Laboratory Refers To Practical No.6 Mentioned In Syllabus Of Diploma In Electrical Engineering (Ee)Part-Ii (4Th Semester)Revised 2022) , Set Up The Solar Pv Plant To Produce Electricity (For Renewable Energy Power Plants Laboratory Refers To Practical No.9 Mentioned In Syllabus Of Diploma In Electrical Engineering (Ee)Part-Ii (4Th Semester)Revised 2022) , Test The Proper Functioning Of Power Electronic Switches-Scs(Silicon Controlled Switch Or Tetrode)Igbt,Triac.(For Electronics Converters And Applicationslaboratory Refers To Practical No.1 Mentioned In Syllabus Of Diploma In Electrical Engineering (Ee)Part-Ii (4Th Semester)Revised 2022) , Test The Proper Functioning Of Diac To Determine The Break Voltage.(For Power Electronics Converters And Applicationslaboratory Refers To Practical No.2 Mentioned In Syllabus Of Diploma In Electrical Engineering (Ee)Part-Ii(4Th Semester)Revised 2022) , Determine The Latching Current And Holding Current Using V-I Characterictics Fo Scr. ( For Power Electronics Converters And Applications Laboratory Refers To Practical No.3 Mentioned In Syllabus Of Diploma In Electrical Engineering (Ee)Part-Ii(4Th Semester) Revised 2022) , Test The Variation Of R,C In R And Rc Triggering Circuits On Firing Angle Of Scr. (For Power Electronics Converters An Applications Laboratory Refers To Practical No.4 Mentioned In Syllabus Of Diploma In Electrical Engineering (Ee)Part-Ii(4Th Semester)Revised 2022) , Test The Effect Of Variation Of R,C In Ujt Triggering Technique.(For Power Converters And Application Laboratory Refers To Practical No.5 Mentioned In Syllabus Of Diploma In Electrical Engineering (Ee) Part-Ii (4Th Semester)Revised 2022) , Perform The Operation Of Class- A,B,Cturn Off Circuits.(For Power Electronics Converters And Applications Laboratory Refers To Practical No.6 Mentioned In Syllabus Of Diploma In Electrical Engineering (Ee)Part-Ii (4Th Semester) Revised 2022 , Test The Performance Of Given Ups.( For Power Electronics Converters And Applications Laboratory Refers To Practical No.14 Mentioned In Syllabus Of Diploma In Electrical Engineering (Ee) Part-Ii (4Th Semester) Revised 2022 , Study On Smps. (For Power Electronics Converters And Applications Laboratory Refers To Practical No. 15 Mentioned In Syllabus Of Diploma In Electrical Engineering (Ee)Part-Ii (4Th Semester)Revised 2022) , Determine The Firing Angle Using Diac And Triac Phase Controlled Circuit On Output Power Under Different Loads Such As Lamp, Motor Or Leater( For Power Electronics Converters And Applications Laboratory Refers To Practical No.10 Mentioned In Syllabus Of Diploma In Electrical Engineering (Ee)Part-Ii(4Th Semester) Revised 2022 , Control The Speed Of Dc Motor Using Field Current & Armature Control Method.(For Industrial Drives Laboratory Refers To Practical No.1 &2 Mentioned Insyllabus Of Diploma In Electrical Engineering (Ee) Part-Ii (5Th Semester) Revised 2022) , Effect On Speed Of Given D.C. Series Motor By Varying Armature Voltage Using Step Down Chopper.(For Industrial Drives Laboratory Refers To Pratical No.5 Mentioned In Syllabus Of Diploma In Electrical(Ee) Part-Ii( 5Th Semester) Revised 2022 , Control The Speed Of Three Phase Squirrel Cageinduction Motor Using Stator Voltage Controll(For Industrial Drives Laboratory Refers To Practical No.4 Mentioned Insyllabus Of Diploma In Electrical Engineering (Ee) Part-Ii (5Th Semester) Revised 2022) , Measure The Output Voltage Of Chopper For Resistive Load By Varying The Frequency And /Or Duty Cycle Chopper.(For Industrial Drives Laboratory Refers To Pratical No.3 Mentioned In Syllabus Of Diploma In Electrical(Ee) Part-Ii( 5Th Semester) Revised 2022 , Dc Power Supply (Input 415V Ac, 3 Phase, Output 45 To 300V, 3-100 A) , Experimental Kit For Occ Test Of Dc Generator , Digital Optical Tachometer , Experimental Kit To Measure The Open Circuit Voltage Ratio And Speed Control By Insertion Of Resistance In Rotor For Induction Motor (Slip Ring) , 3 Phase Variac (2 Kva) , Rheostat (0.5Hp, 25A) , Three Phase Rheostat , Experimental Kit For Vector Grouping Of 3 Phase Transformer , Brake Test On Dc Series Motor , Experimental Kit For No-Load Ond Blocked Rotor Test On Three Phase Squirrel Cage Induction Motor , Experimental Kit For Controlling The Speed And Reverse The Direction Stepper Motor , Dismantling And Reassembling Of Universal Motor For Mixer , Experimental Kit To Conduct The Direct Load Test To Determine The Efficiency And Speed Regulation For Different Loads On 1 Phase Induction Motor , Experimental Kit For Controlling The Speed And Reverse The Direction Ac Servo Motor , Experimental Kit For Controlling The Speed And Reverse The Direction Dc Servo Motor , Use Voltmeter, Ammeter, Wattmeter To Determine Active, Reactive And Apparent Power Consumed In Given R-L-C Series Circuit, Draw Phasor Diagram. (A Experimental Set With Variable L, Variable C With 4 Digital Voltmeter And 4 Digital Ammeter (220 V Supply) , Use Voltmeter, Ammeter, Wattmeter, P.F Meter To Determine Line And Phase Quantities Of Voltage And Current For Balanced & Unbalanced Three Phase Star And Delta Connected Load And Calculate Active, Reactive And Apparent Power, Draw Phasor Diagram , Use Voltmeter, Ammeter To Determine Current Through The Given Branch Of An Electric Network By Applying Mesh Analysis & Applying Node Analysis , Use Voltmeter, Ammeter To Determine Current Through The Given Branch And Voltage Across The Given Element Of Circuit By Applying Superposition Theorem & Applying Thevenins Theorem & Nortons Theorem (Aslo Maximum Power Transfer Theorem Can Verigy) , Ct And Pt , Rod Gap, Horn Gap, Zinc Oxide Lighting Arrestor (1 Each) , Demonstrate The Improvement Of Power Factor Using Static Condenser , M.C.C.B , E.L.C.B , R.C.C.B , 8051 Microcontroller Trainer Kit , Experimental Kit For Measurement Of Active Power Of Three-Phase Balanced Load Using Two Watt-Meter Method , Wheatstone Bridge For Measurement Of Medium Resistance , Analog Ammeter And Analog Voltmeter , D.C. Network Analyzer , Zener Diode Characteristics Apparatus , Electrical Insulation Rubber Mat , Experimental Kit For Reduction In Power Consumption In Star Mode Operation Of Induction Motor Compared To Delta Mode At Different Load Conditions , Identity & Study The Specified Components Of A 1 Kw Small Wind Turbine (Swt) System. (For Renewable Energy Power Plants Laboratory Refers To Practical No. 7 Mention In Syllabus Of Diploma In Electrical Enginnering [Ee] Part-Ii (4Th Semester) Revised 2022 , Cro , Measure Unknown Inductance Using Anderson Bridge , Training Kit For Sodium Vapour Lamp , Training Kit For Mercury Vapour Lamp , Insulation Tape , 1.5 Sqmm Copper Wire Coil , 0.75 Sqmm Wire Coil , 1 Sqmm Wire Coil , 2.25 Sqmm Wire Coil , 3 Pin Socket , 3 Pin Top (16A) , 3 Pin Top (6A) , Glass Fuse , Silicon Diode , Transistor , Thyristor , L7824 Ic (Three Terminal Positive Regulators) , L7905 Ic (Three Terminal Negative Regulators) , L7908 Ic (Three Terminal Postive Regulators) , L7912 Ic(Three Terminal Positive Regulators) , L7915 Ic (Three Terminal Positive Regulators) , Inverter , Microwave Oven , L7805 Ic (Three Terminal Positive Regulators) , L7806 Ic (Three Terminal Positive Regulators) , L7808 Ic (Three Terminal Positive Regulators) , L7809 Ic (Three Terminal Positive Regulators) , L7812 Ic (Three Terminal Positive Regulators) , L7815 Ic (Three Terminal Positive Regulators) , Op-Amp Ic , 555 Timer Ic , Potentiometer (Type-I) , Potentiometer (Type-Ii) , Potentiometer (Type-Iii) , Screw , Pcb Hand Drill+5 Bit Rotary Bit Set , Pcb Design Single Side Copper Plate , Socket (Copper) , Science & Humanities Department : , Analytical Balance , Digital Ph Meter , Digital Conductivity Meter , Digital Colorimeter , Digital Do-Meter , Complete Set For Thin Layer Chromatography , Arsenic Set (For Laboratory) , Digital Thermometer Or Normal Thermometer , Water Bath , Redwood Viscometer , Ables Flash Point Apparatus , Distillation Plant , Daniel-Cell For Emf Measurement
Contract Date: Jun 26, 2025 Contract Value : ₹ 20.75 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
40.
Power #8537418 AOC
Bids Are Invited For Teletector/Radiation Survey Meter , Radiation Survey Meter Total Quantity : 3
Contract Date: Ref. Documents Contract Value : ₹ 14.13 Lakh
Boards / Undertakings / PSU No of Bidders 10
Gujarat View Result →
41.
Defence #8511326 AOC
Bids Are Invited For Hand Foot And Clothing Contamination Monitor , Telescopic Radiation Survey Meter , Digital Area Monitor , Contamination Monitor Total Quantity : 3
Contract Date: Ref. Documents Contract Value : ₹ 19.58 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Andaman And Nicobar Islands View Result →
42.
Power #8500349 AOC
Bids Are Invited For Supply, Installation, Testing & Training For Well Type Csi(Tl) Detector As Per Specifications , Radiation Survey Meter Total Quantity : 1
Contract Date: Ref. Documents Contract Value : ₹ 32.02 Lakh
Boards / Undertakings / PSU No of Bidders 5
Haryana View Result →
43.
Educational and Research Institute #8486032 AOC
Empanelment Of Cathlab Items , Des, Everolimus Fda Approved Platinum Chromium Platform , Des, Everolium, Fda Approved Platinum Chromium Platform Poly-Vunylicene Fluoride , Des, Everolimus , Fda Approved Cobalt Chromium Platform Stent Length Up To 38 Mm , Des Everolimus For Approved Cto Stent Cobalt Chromium Platform Stent2.25Mm To 4.25Mm Diameter , Des, Everolimus, Fda Afproved Platinum Chromium Platform, Bioabsorbable Polymer Plga , Des, Everolimus Fda Approved Cobalt Chromium Platform Stent Length From 12 Mm Upto 38 Mm , Des, Everolimus Hypotube Halloon Technology, Fda Approved Cobalt Chromium Platform Stem Length Up To 48 Mm , Des, Everolimus, Fda Approved Cto Stent Cobalt Chromium Platform, Fluoropolymer Z:25Mm To 4:25Mm , Des Everolimus, Only Dcgi Cobalt Chromium Platform, 50 Micron Strut Thickness , Des, Everolimus Only Dcgi Cobalt Chromium Platform With 55 Micron Strut , Des Everolimus, Only Ce Afproved Cobalt Chromium Platform With 65 To 70 Micron Strut , Des Everolimus, Only Dcgi Cobalt Chromium Platform With 65 To 70 Micron Strut , Des, Everolimus, Only Ceapproved Cobalt Chromium Platform With 60 To 65 Micron Strut , Des, Everolimus Only Dcgi Cobalt Chromium Platform With 60 To 65 Micron Strut , Des, Everolimus, Only Degi Cobalt Chromium Platform With 60 Micronstrut , Des Everolimus Only Dcgi Cobalt Chromium Platform , Des, Everolimus, Ce / Fda / Dcgi Approved Cohalt Chromium Platform Biodegradable Polymer Strut Thickness 56-60Microns With Cumulative Drug Release Technology Length 8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48, Sze2, 2.25, 2.5, 2.75, 3, 3.5, 4, 4.5; Delivery System 140 Cm , Des Everolimus, Ce / Fda / Dcgi Approved Cobalt Chromium Biodegradable Polymer, 60 Micron Strut With Z Link Technology And Tetrinium Design With Cumulative Drug Release Technology: Length: 8.12.16.20, 24 28.32.36.40.44.48 , Des Everolimus , Biodegradable And Biocompatible Polymer, Size: 2.25 ( Mm ) To 4.5; Stent Length 8 To 48 ( Mm ) , Dcgi Approved Des Everolimus Xtent System With Cobalt Chromium; 65 Micron Strut Thickness Size: 2.25, 2.5, 2.75, 3, 3.5, 4, 4.5 Length: 8 To 47 Mm , Des, Evorolimus Cobalt Chromium, Biodegradable Polymer, Dcgi Approved, 65 Micron Struts With Open & Closed Design. Size 2.25-4 Mm Length-10, 13, 15, 18, 20, 24 28.32.36.40.42, 44 Mm , Des, Biolimus Fda Approved Cobalt Chromium Platform , Des Biolimus, Ce Approved Cobalt Chromium Platform , Des, Biolimus, Only Dcgi Approved Cobalt Chromium Platform 60 Micron Strut Thickness , Des Zotarolimus, Fda Approved Cobalt Chromium Platform Polymer Type-Biolinx , Des Zotarolimus, Ce Approved Cobalt Chromium Platform Polymer Type-Phosphorylcholine , Des Zotarolimus, Only Dcgi Cobalt Chromium Platform Hydrophilic Polymer , Des Zotardlimus Eluting Coronary Stent System With Core Wire And Continuous Sinsoid Technology , Des Dual Drug Eluting Polymer Free Stent , Bms Fda Approved Cobalt Chromium Platform , Bms, Ce Approved Coralt Chromium Platform , Bms Only Dcgiapproved Cobalt Chromium Platform , Bifurcation Stent Self Expanding, Nitinol , Bifurcation Stent Balloon Expanding, Platinum Chromium , Bifurcation Stent Sirolimus Eluting, Cobalt Chromium , Bifurcation Stent Paclitaxel Eluting, Cobalt Chromium , Tapered Des Sirolimus Coranary Stent With Biodegradable Polymer , Des Sirolimus, Ce And Fda Approved, Cobalt Chromium Platform, Biodegradable Plla Eluting 60 Mcg Strut Thickness, Cumulative Drug Release Technology With High Trackability , Des, Sirolimus, Only Dcgi Approved Cobalt Chromium Platform 45 Micron , Des Sirolimus, Ce Approved Stainless Steel Platform , Des, Sirolimus, Only Dcgi Approved Stainless Steel Platform 50 Micron Strut Thicknes , Des Sirolimis, 65 Micron Strut Hybrid Design With Proximal Main Branch Segment And Distal Tapered Side Branch Segment , Des, Sirolimus Cobalt Chromium ( Any Diameter / Any Length ) , Sirolimus Eluting Conorary Stent System With An 65 Um Strut Thickness, Delivery System With Manolithic Distal Shaft Design Elongated Des Sirolimus, Ce Approved, Cobalt Chromium Platform, Abluminal Biodegradable Polymer Eluted In The Grooves , Des, Sirolimus, Ce Approved, Cobalt Chromium Platform, Abluminal Biodegradable Polymer Eluted In The Grooves , Dcg Approved Everolimus Drug Eluting 65 Micron Strut Thickness With 3 Micron Pllamplga A Unique Proprietory Coating Technology Based Biodegradable Polymer Stent With Open Cell Designed And Flexia Finished Technology Based Cobalt Chromium L105 Stent. A , Dcg Approved Everolimus Drug Eluting 65 Micron Strut Thickness With 3 Micron Pleasplga A Unique Proprietory Coating Technology Based Biodegradable Polymer Stent With Open Cell Designed And Flexia Finished Technology Biased Cobalt Chromium L605 Stent. A , Ce Approved Sirolimus Drug Eluting 65 Micron Strut Thickness With 3 Micron Pllasplga A Unique Proprietory Coating Technology Haved Biodegradable Polymer Stent With Open Cell Designed And Flexia Finished Technology Based Cobalt Chromium L505 Stent. A , Ce Approved Sirolimus Drug Eluting 65 Micron Strut Thickness With 3 Micron Plla&Piga A Unique Proprietory Coating Technology Based Biodegradable Polymer With Open Cell Designed And Flexia Finished Technology Based Cobalt Chromium 1605 Stent. A Designed For , Coronary Self Apposing Stent , Multilink Cobalt-Chromium , Meshed Stent , Ptfe Covered Stent Stainless Steel, Rapid Exchange Type, Sizes 28, 35.4.4.5.4.8Mm, Usable Length 143Cm, Crimped Stent Profile 0.068 Inch , Biodegradable Vascular Scaffold ( Bvs ) Everolimus Eluting , Biodegradable Vascular Scaffold ( Bvs ) Sirolimus Eluting , Stainless Steel Abluminally Coated Sirolimus Eluting Coronary Stent With Microporous Surface & Low Biodegradable Polymer With Temperature Controlled Packing And Temperature Monitoring Device-Ce Approved , Polymer Free Dual Drug Sirolimus And Probucol Eluting Stent Technology With Microporous Surface Abluminal Coating And Shellac Resin With Diameters 2Mm-4Mm And Length 8Mm-48Mm-Dcgi Approve , Cobalt Chromium Abluminally Coated Sirolimus Eluting Coronary Stent With Microporous Surface & Low Biodegradable Polymer -Ce Approved , Stainless Steel Abluminally Coated Sirolimus Eluting Coronary Stent With Microporous Surface & Low Biodegradable Polymer Ce Approved , Des, Sirolimus, Ce Approved Stainless Steel Platform, Prma / Peva Double Layer Polymer Coating For Optimal Drug Release Control, 90 Days Drug Releasing, Flexible Stent Design Large Opencells For Side Branch Access , Des, Sirolimus Ce / Fda / Dcgi Approved Cobalt Chromium Platform, Biodegradable Polymer, Strut 56 60Microns.Length:8, 12.16.20, 24, 28, 32.36, 40, 44, 48, Size: 2.2.25, 2.52.75.3.3.5.4.4.5, With Laser Cut Technology Seamless Tuhing In A Serpentine Patern , Des, Sirolimus With Cumulative Drug Realese Technology. Ce / Fda / Dcgi Approved Cobalt Chromium Platform, Biodegradable Polymer Strut Thickness 60Microns, Length:8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48, Sires: 2, 2 25, 2.5.2.75.3.3.54, 45 With Laser Cut Technology Seamless Tubing In A Serpentine Patern, Ldz Stent Link Design , Des, Sirolimus With Cumulative Drug Realese Technology, Ce / Fda / Dcgi Approved Cobalt Chromium Platform, Biodegradable Polymer Strut Thickness 65 Microns Length:8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48 Sizes: 2.2.25, 2.5, 2.75.3.3.5, 4, 4.5, With Laser Cut Technology Seamless Tubing In A Serpentine Patern , Des, Sirulimus Ce / Fda / Dcgi Approved Cobalt Chromium Platform, Biodegradable Polymer, S-Link Strut 56 60Micronis Size 8, 12, 16-20, 24, 28, 32, 36, 40, 44, 48, Size: 2.2 25, 25, 275.3.3.54, 45 With Laser Cut Technology Seamless Tubing In A Serpentine Patern , Dual Drug Sirolimus Coated Stent Fusion Coating Both Stent & Balloon With Drug Coating Edge Coating: 0.5Mm Of Proximal And Distal Ends Of Balloon Also Should Be Coated Sizes: 2.25-4Mm Length: 8-40Mm , Des-Sirolimus Eluting Stentwith Biodegradable And Biocompatible Polymer Stent Diameter 2.25 [ Mm ] Stent Length B To 48 ( Mm ) , Des Sirolimus Eluting Cobalt Chromium Stent System Strut Thickness Of 0.07Mm With A Hybrid Design Of Closed And Open Cells With Hypotube For Pushability Size:25.2.75.3.3 Ngth 8, 13, 18, 23.28.33.38 , Drug Eluted Cobalt Chromium Stent With Biodegradable Ploymer On Microparus Surface Temparature Contol With Tag Alert , Drug Eluted Cobalt Chromium Stent With Biodegradable Playmer On Microporus Surface. , Des Sirolimus / Probucol Eluting Stent Polymer Free Coronary Stent System , Des Sirolimus.Cobalt Chromium Long Stent With Length More Than 48 Mm , Des Sirolimus Cobalt Chromium, Biodegradable, Biocompatible Polymer, Sizes Ranging From 2 To 45 Mm Length And Diameter 8Mm To 48Mm , Des , Sirolimus 3.9 Nano Gram / Stent Length , Cobalt Chromium L605 Stent With 80 Micron Stent Thickness With Open Cell Structure For Side Branch Re Crossing , Des, Sirolimus 3.9 Nano Gram / Stent Length, Cobalt Chromiuml605 Stent With 80 Micron Strent Thickness With Open Cell Structur Forbranchre Crossing Coating Albuminal And Gradient, Hydro Philic Distal Shaft Coating , Des, Sirolimus L 605 Cobalt Chromium, Biodegradabe Polymer Dcgi Approved, 65 Micron Struts With Open & Closed Design Size 2.25-4 Mm Length -10, 13, 15, 18, 20, 24, 28, 32, 36, 40Mm , Coronary Stent Des, Sirolimus Drug Abluminal Coated Stent And Balloon , Des, Sirolimus Fda / Dcgi / Ce Approved Cobalt Chromium Platform , Des Sirolimus, Ce Apporoved, 59 Micron Strut Thickness With High Trackability , Des, Sirolimus Cobalt Chromium, Ce / Dcgi, 70Micron Strut Size 2.5, 2.75, 3, 3.25, 3.5, 4 Length:8, 13, 18, 23, 28, 33, 38, With Plla-Pgla Based Polymer , Cobalt Chromium L605 Alloy Sirolimus Eluting Coronary Stent Biodegradable Polymer -Ce Approved, Width Proximal / Distal Cell:85Micron To Connector 50 Micron Delivery System Length 140Cm Size: 2.25, 2.5, 2.75, 3, 3.5, 4, 4.5 Length: 8 To 47 Mm , Renal Stent Diameters-5-7Mm, Lengths-12-18Mm , Covered Peripheral Stent-Self Expanding Self Expanding , Covered Peripheral Stent-Balloon Expanding Balloon Expanding , Covered Stent Diameter:6Mm-14Mm / Length:30Mm-70Mm , Carotid Self-Expandable Stent , Fda Approved Carotid Stent ( Open Cell ) Nitinol Mesh Straight & Tapered , Fda Approved Carotid Stent ( Closed Cell ) Nitinol Mesh Straight & Tapered , Ce Approved Carotid Stent With Micro Mesh To Minimise Risk Of Distal Embolisation , Coarctation Stent ( Covered ) Platinum / Iridium, 0.035 Compatible, Diameter - 12-24Mm, Lengths-16, 22, 28, 34, 39, 45, 50, 55, 60Mm, Delivery System Length - 110Cm , Coarctation Stent ( Uncovered ) Platinum / Iridium, 0.035 Compatible, Diameter - 12-24Mm, Lengths-, 16, 22, 28, 34, 39, 93 45, 50, 55, 60 Mm, Delivery System Length - 110Cm , Abdominal Aortic Stent , Abdominal Aortic Stent Graft , Thoracic Aortic Stent Graft , Carotid Balloon Expandable Stent , Peripheral Self-Expanding Stents Nitinol / Eptfe, Guidewire - 0.035, Diameters-6, 7, 8, 9, 10, 12, 13.5Mm, Lengths-40, 60, 80, 100, 120Mm, Delivery System Lengths -80, 117Cm , Balloon Expandable Peripheral Stents ( Bms ) , Fda Approved Balloon Expandable Illac Stents ( Co Cr ) Cobalt Chromium, Compatible Guidewire -0.014, Diameters-6-10Mm, 100 Lengths-12, 16, 19, 29, 39, 59Cms, Delivery System Lengths- 80, 135Cm , Balloon Expandable Biliary / Illac Stents ( Stainless Steel ) , 0.035 Compatible Stainless Steel, Compatible Guidewire -0.035, Diameters-6-10Mm, Lengths-17, 25, 27, 37, 57Mm, Delivery System Lengths-75, 135 , Balloon Expandable Iliac Stents ( Stainless Steel ) Stainless Steel, Compatible Guidewire -0.035, Diameters- 11, 12Mm, Length - 30Mm , Balloon Expandable Biliary / Renal Stent ( Stainless Steel ) Stainless Steel, Compatible Guidewire -0.0148 0, 018, Diameters-3-8Mm, Lengths-12, 16, 20, 24, 30Cms, Delivery System Lengths-80, 135Cm , Balloon Expandable Biliary / Renal Stent ( Stainless Steel ) Stainless Steel, Compatible Guidewire -0.0148 0, 018, Diameters-3-8Mm, Lengths-12, 16, 20, 24, 30Cms, Delivery System Lengths-80, 135Cm , Fda Approved Interwoven Nitinol Stent For Sfa / Popliteal Jowest Kink Resistant Diameters-4.5-6.5Mm, Lengths-20, 30, 40, 60, 105 80, 100, 120, 150Cm, Delivery System Length - 120Cm , Stent Across Hip / Knee Joint, Diameters- 6, 7, 8Mm, Length-120Cm , Fda Approved Self Expanding Nitinol Stent System For Iliac Arteries 0.035 Compatible , Diameters-6, 7, 8, 9, 10Mm, Guidewire107 0.035, Length 20, 30, 40, 60, 80, 100, Delivery System Length -80, 135Cm , Nitinol Stent System For Illac Arteries 0.035 Compatible Diameters- 12Mm, Guidewire-0.035, Lengths-20, 30, 40, 50, 60, 70, 80, 100, 120Cm, Delivery System Length-75, 120Cm , Nitinol Stent System For Liac Arteries 0.018 Compatible, Diameters 6, 7, 8, 9, 10Mm, Guidewire-0.018, Lengths-20, 30, 40, 60, 80Cm, Delivery System Length-125Cm , Nitinol Stent System For Sfa Diameters- 5, 6, 7, 8, Lengths-20, 40, 60, 80, 100, 120, 150, 200Mm, Delivery System Length - 75, 130 , Elgiloy Endoprosthesis System For-Iliac A, Diameters- 6, 7, 8, 9, 10Mm Lengths 18, 20, 23, 24, 34, 35, 36, 38, 39, 46, 47, 49, 52, 55, 59, 61, 66, 67, 69Mm, Delivery System Length 75, 135 , Self Expandable Peripheral Stent System, Diameter 3.8Mm-4.5Mm / Length:16Mm-76Mm , Self Expandable Peripheral Stent System, Diameter 19Mm-14Mm / Length:8Cm-120Cm , Fda Approved Sfa Self Expanding Peripheral Stent Length From 120-150Mm On 135 Cm Catheter , Self Expandable Peripheral Stent System.Straight Type-Diameter:6Mm-10Mm / Length: 135Cm Tapered Type-Diameter: ( 8 / 6 ) Mm ( 10 / 7 ) Mm / Length: 135Cm , Balloon Expandable Peripheral Stentdiameter:5Mm-10Mm / Length:12Mm-57Mm , Balloon Expandable Peripheral Stent, Diameter: 5Mm-7Mm / Length:14Mm-21Mm , Semicompliant Balloon Balloon Size: 1.2Mm-5 Mm / Length: 6 Mm -42 Mm, ( Fda / Ce Approved ) , Otw Compliant Balloon Balloon Size: 1.2Mm - 5 Mm / Length: 6 Mm 30Mm, ( Fda / Ce Approved ) , 1.25-2.5Mm Semicompliant Otw Balloon For Cart Technique Balloon Length: 10-20 Mm / Shaft Length: 135, 148Cm, Entry Profile-0.43 Mm ( Fda / Ce Approved ) , Core-Wire Structure With Superior Radio Opacity Atraumatic Navigation Baloon With 3 Pleats Construction And Platinum Iridlum Markers Ce & Dgci Approved Hydrophilic Coated Shaft Tip With Fasttrack Tip Technology , Baloon With 3 Pleats Construction And Platinum Iridium Markers Ce & Dgci Approved Shaft With Tapered Wire Construction For Better Trackability Tip With Flexible Material And Entry Profile Of 0.017 , Rapid Exchange Noncompliant Balloon Balloon Size: 1.2Mm- 5 Mm / Length: 6 Mm -42 Mm ( Fda / Ce Approved ) , Rapid Exchange Semicompliant Balloon Balloon Size: 1.2Mm - 5 Mm / Length: 6 Mm -42 Mm ( Fda / Ce Approved ) , Otw Noncompliant Balloon Balloon Size: 1.2Mm - 5 Mm / Length: 6 Mm-30 Mm ( Fda / Ce Approved ) , Otw Semicompliant Balloon Balloon Size: 1.2Mm-5 Mm / Length: 6 Mm-30 Mm ( Fda / Ce Approved ) , 1.25-2.5Mm Semicompliant Cto Balloon Balloon Length: 10-20 Mm / Shaft Length: 148Cm, ( Fda / Ce Approved ) , 1.25-2.5Mm Non-Compliant Cto Balloon Balloon Length: 10-20 Mm / Shaft Length: 148Cm, ( Fda / Ce Approved ) , Ce / Dcgi Approved Rapid Exchange Balloon For Chronic Total Occlusion. 0.016Mm Lesion Entry Profile &Tapered Balloon Shape For Preventing Buckling, Crossing Profile Of 0.019, With Hydrophilic Coating With Proximal Single Marker, Shaft Length 140Cm , Us Fda Approved Rapid Exchange 1.2-2 Mm Semicompliant Cto Balloon, Balloon Length:6-30Mm / Shaft Length:145Cm. ( Fda / Ce Approved ) , Rapid Exchange Compliant / Noncompliant Balloon, Balloon Diameters-4-6Mm, Lengths-15, 20Mm, Catheter Length-150Cm, Nominal Pressure-6Atm ( Fda / Ce Approved ) , Rapid Exchange Compliant / Noncompliant Balloon, Balloon Diameters-1.5- 4Mm, Lengths- 9- 30Mm, Catheter Length-142Cmnominal Pressure-6-14Atm ( Fda / Ce Approved ) , Monorail Compliant / Noncompliant Balloon, Balloon Diameters-1.5- 4Mm, - 9- 30Mm, Catheter Length-140 / 135Cm, , Otw Compliant / Noncompliant Balloon , Balloon Diameters-1.5- 4Mm, Lengths-9-30Mm, Catheter Length-140 / 135Cm, Nominal Pressure-6Atm ( Fda / Ce Approved ) , Monorail Compliant / Noncompliant Balloon, Balloon Diameters-2-6Mm, Lengths-6-30Mm, Catheter Length-143 Cm, Nominal Pressure12atm ( Fda / Ce Approved ) , Otw Compliant / Noncompliant Balloon, Balloon Diameters-2-6Mm, Lengths-6-30Mm, Catheter Length- 142Cm, Nominal Pressure-12Atm ( Fda / Ce Approved ) , Nc Balloon Twin Layered For Very High Pressure Dilatation, Balloon Diameters ) -2- 6Mm, Lengths- 6- 30Mm, Catheter Length- 142Cm ( Fda / Ce Approved ) , Semicompliant / Noncompliant Balloon With Tip Entry Profile 0.019 , Balloon Lengths-8-38Mm, Balloon Diameters-2-4.5Mm0.014Compatible ( Fda / Ce Approved ) , Us-Fda Approved For Cto Indication, Semi & Noncompliant Balloon Dilatation Catheter Balloon Lengths-8-38Mm, Balloondiameters-2-4.5Mm, 0.014 Compatible ( Fda / Ce Approved ) , Us- Fda Approved For Cto Indication, Semi & Non Complaints Balloon Dilatation Catheter, Average Burst Pressur Of 18 Atmosp And 143Cm Length ( Fda / Ce Approved ) , Us- Fda Approved For Cto Indication, Semi & Non Complaints Balloon Dilatation Catheter, Size :1.5, 2.2.5Mm, Length : 6, 8, 12, 15 ( Fda / Ce Approved ) , Fda Approved Semi Complaints Balloon Dilatation Catheter With Crossflex Technology, Laser Bond Technology, Size 1.2, 1.5, 2, 2.5Mm, Length : 6, 8, 12, 15 ( Fda / Ce Approved ) , Non Compliant Coronary Ballon ; Shaft Size Tapeing From 2.7F-2.3 F Diameter 1.5 To 5.0 Length 6 To 30 Mm , Fda Approved Non Compliant Balloon Dilatation Catheterwith Crossflex Technology, Laser Bond Technology Size; 2, 2.5, 2.75, 3, 3.5, 4, 4.5 Mm, Length ; 6, 8, 12, 15 Mm ( Fda / Ce Approved ) , Rapid Exchange Semicompliant Nylon Semi-Compliant Balloon With 0.017 Tip Entry Profile, 135 Mm Effective Length / Balloon Size : 1.5 Mm - 4 Mm / Length : 9 Mm - 30 Mm ( Fda / Ce Approved ) , Rapid Exchange Pebax Noncompliant Balloonwith Patented Hydrophilic Coating On Distal Shaft With 0.017 Tip Entry Pofile, Balloon Diameter 2.25-4.0 Mm, Lenths 6.0-30 Mm, Effective Catheter Length- 142 Cm, Nominal Pressure-6Atm ( Fda / Ce Approved ) , Rapid Exchange Semicompliant Cto Balloon With 0.016 Tip Entry Profile, Average Burst Pressure Of 24 Atmospheres And 140 Mm Length With Slider Hydro Coating / Balloon Size 1.0 Mm - 4 Mm / Length : 5 Mm - 30 Mm ( Fda / Ce Approved ) , Rapid Exchange Pebax Noncompliant Balloon Ballon With Patented Slider Hydroo Coating With 0.017 Tip Entry Profile And Rated Burst Pressure Of 22 Atm And Mean Burst Pressure Of 30 Atm / Balloon Diameters 2.0-5.0 Mm, Length 8.0- 18 Mm, Effective Working Length - 140Cm ( Fda / Ce Approved ) , Sirolimus Eluting Balloon Nanolute Propritory Nano Carrier Drug Eluting Tecnology Drug : 1.27U / Mm 2 Of Sirolimus Drun Release Within 60 Secs. 14 To 28 Days. Bio Availability In Target Tissue, Size : 2Mm-4Mm Length: 40 Mm To 100 Mm ( Fda / Ce Approved ) , Post Dialatation Catheter Baloon, Proximal Shaft - 1.95F, Distal Shaft - 2.7 F Usable Length - 140 Cm ( Fda / Ce Approved ) , Ptca Pre- Dilatation Catheter, Proximal Shaft - 1.8F, Distalshaft - 2.7F, Usable Length - 140 Cm ( Fda / Ce Approved ) , Semi Compliant Xd Shaft, Hydro X Coating Z Tip From 1 Mm To 4 Mm, Size : 1, 1.25, 1.5, 2, 2.5, 2.75, 3, 3.25, 3.5, 4 Length : 8, 10, 12, 15, 20 ( Fda / Ce Approved ) , Non Compliant Ptca Balloon Catheter With Crossing Profile Of 0.0360 Np Is 12, Rbp 20 Atm Hydro X ( Distal Tip To Guide Wire Exit Port ) Invio Coating ( Guide Wire Lumen ) Size : 1.75, 2, 2.25, 2.75, 3, 3.25, 3.5, 3.75, 4, 4.5, 5, Length : 8, 10, 12, 15, 18 ( Fda / Ce Approved ) , Ultra Low Profile Cto Balloon With 0.016 Tip Entry Profile, Flexible Tip. Tri Wrapped Balloon Provide Enhancing Crossability Thin Proximal Shaft Of 1.9 F Nominal Of 6 Atm And Rbp Of 14 Atm. 1.25 To 3 Mm Diameter Balloon ( Fda / Ce Approved ) , Fda / Ce Approved, Non Compliant Ptca Balloon Catheter With Hydropolic Coating Shaft Length Is 145Cm, Shaft Diameter : 2F ( 0.67 ) Proximal, Distal : 2.5F ( 0.83 ) , Distal For 2.25Mm To 3Mm 2.6 Fr ( 0.87Mm ) Distal For 3.25 Mm To 5 Mm With Double Balloon Marker, Rbp ; 20 Atm For 2.25 Mm To 4 Mm, 18 Atm For 4.5 Mm With Entry Profile 0.43 Mm , ( Fda / Ce Approved ) Non Complint Hydrophilic Coated Balloon With Flexible Thin Markers, Tri Layer Balloons With Soft Inner And Outer Elastomer Layers That For Resistance From High Pressures And Stronger Polymide Layer In The Middle For Aditional And Safer High Pressure Ressistance, Shaft Diameter Of 1.9F Proximal And 2.5F In The Mid Segment 145 Cm Length With Nominal Pressure Of 12 Atm And Rbp 22 Atm , Semicompliant Balloon, Balloon Size : 1.5 Mm - 2.5 Mm / Length : 8 Mm - 20 Mm Rapid Exchange Proimal Shaft 0.72 Mm And Distal Shaft 0.90 Mm. Tip Profile - 0.018 With Nominal Inflation Pressure 8 Atm & Rbp - 16 Atm, And Having Two Plantinum Iridum Markers ( Dcgi Approved ) , Semicompliant Balloon, Balloon Size : 1.2 Mm - 5 Mm / Length : 6 Mm - 42 Mm ( Dcgi Approved ) , Otw Compliant Balloon, Balloon Size : 1.2 Mm - 5 Mm / Length : 6 Mm - 30 Mm ( Dcgi Approved ) , 1.25- 2.5 Mm Semicompliant Otw Balloon For Cart Technique, Balloon Length : 10-20 Mm / Shaft Length : 135, 148 Cm, Entry Profile - 0.43 Mm ( Dcgi Approved ) , Rapid Exchange Noncompliant Balloon, Balloon Size : 1.2 Mm - 5 Mm / Length : 6 Mm - 42 Mm ( Dcgi Approved ) , Rapid Exchange Semicompliant Balloon, Balloon Size 1.2 Mm - 5 Mm / Length : 6 Mm -42 Mm ( Dcgi Approved ) , Otw Noncompliant Balloon, Balloon Size : 1.2 Mm - 5 Mm / Length : 6 Mm - 30 Mm ( Dcgi Approved ) , Otw Semicompliant Balloon, Balloon Size : 1.2 Mm - 5 Mm / Length : 6 Mm - 30 Mm ( Dcgi Approved ) , 1.25 - 2.5 Mm Semicompliant Cto Balloon, Balloon Length : 10-20 Mm / Shaft Length : 148 Cm ( Dcgi Approved ) , 1.25 - 2.5 Mm Non-Compliant Cto Balloon, Balloon Length : 10-20 Mm / Shaft Length : 148 Cm ( Dcgi Approved ) , Us Fda Approved Rapid Exchange 1.2-2 Mm Semicompliant Cto Balloon, Balloon Length : 6 - 30 Mm / Shaft Length : 145 Cm ( Dcg Approved ) , Rapid Exchange Compliant / Noncompliant Balloon, Balloon Diameters : 4 - 6 Mm, Lengths- 15 - 20 Mm, Catheter Length - 150 Cm, Nom Pressure - 6 Atm ( Dcgi Approved ) , Rapid Exchange Compliant / Noncompliant Balloon, Balloon Diameters : 1.5 - 4 Mm, Lengths - 9 - 30 Mm, Catheter Length - 142 Cm, Nominal Pressure - 6 -14 Atm ( Dcgi Approved ) , Monorail Compliant / Noncompliant Balloon, Balloon Diameters - 1.5-4 Mm, Lengths - 9-30 Mm, Catheter Length - 140 / 135 Cm, Nominal Pressure - 6 Atm ( Dcgi Approved ) , Otw Compliant / Noncompliant Balloon, Balloon Diameters - 1.5-4 Mm, Lengths - 9-30 Mm, Catheter Length - 140 / 135 Cm, Nominal Pressure - 6 Atm ( Dcgi Approved ) , Monorail Compliant / Noncompliant Balloon, Balloon Diameters - 2-6 Mm, Lengths - 6-30 Mm, Catheter Length - 143 Cm, Nominal Pressure - 12 Atm ( Dcgi Approved ) , Otw Compliant / Noncompliant Balloon, Balloon Diameters - 2-6 Mm, Lengths - 6-30 Mm, Catheter Length - 142 Cm Nominal Pressure - 12 Atm ( Dcgi Approved ) , Semicompliant / Noncompliant Balloon, With Tip Entry Profile 0.019, Balloon Lengths-8-38 Mm, Balloon Diameters -2-4.5 Mm, 0.014 Compatible ( Dcgi Approved ) , Non Compliant Ptca Balloon Catheter With Hydrophilic Coating, 0.16 Lesion Entry Profile And 24 Bar Rbp ( Dcgi Approved ) , Semi Compliant Ptca Balloon, Catheter With Hydrophilic Coating On Balloon And Distal Shaft Including Sleeve And Transition Tube With Comparable Lesion Entry Profile ( Dcgi Approved ) , Twin Layered Super High Pressure Balloon Dilated Catheter For Highly Calcified Lesion, 35 Bar Rbp, 45 Bar Abp-Ce Marked ( Dcgi Approved ) , Semicompliant Balloon, Balloon Size : 1.5 Mm - 2.5 Mm / Length : 8 Mm - 20 Mm Rapid Exchange Proimal Shaft 0.72 Mm And Distal Shaft 0.90 Mm, Tip Profile - 0.018 With Nominal Inflation Pressure 12 Atm & Rbp - 22 Atm, And Having Two Plantinum Iridum Markers ( Dcgi Approved ) , Rapid Exchange Noncompliant Balloon, Size : 1.0 Mm - 5 Mm / Length : 6 Mm - 42 Mm Catheter Length = 135-140 Cm Nominal Pressure - 12 Atm ( Dcgi Approved ) , Otw Semicompliant Balloon, Balloon Size : 1.2 Mm - 5 Mm / Length : 6 Mm - 30 Mm ( Dcgi Approved ) , Ptca-Rapid Exchange Semi Compliant Pre-Dilation Catherer Entry Profile 0.017 Crossing Profile 0.026 Shaft Length 2.2 Fr Skived Over Extruded Hypotube Distal 2.4 Fr, Size 1.5, 2 Length: 10, 15, 20, 30 ( Dcgi Approved ) , Semi Compliant Pre-Dilation Catherer, Balloon Meterial Nylon 12, Entry Profile0.017, Crossing Profile 0.026 Shaft Length 2.2 Fr Skived Over Extruded Hypotube Distal 2.4 Fr, Size 2.5, 2.75, 3, 3.25, 3.5, 3.75 Length: 10, 15, 20, 30, 32 ( Dcgi Approved ) , Low Profile Otw Peripheral Vascular Dilatation Balloons : Low Profile Over The Wire Peripheral Vascular Dilatation Balloons, End Hole 018, Shaft Length 40, 80, 90, 135, 150 Cms, Balloon Diameters 2.5Mm To 10Mm, Balloon Length 1Cm To 22Cm, Upto 8*4 - 4 Fr Sheath Capable, Upto 10*4 5Fr Sheath Capable, Upto 10*8 - 6 Fr Sheath Capable , Ptca-Rapid Exchange Non Compliant Post-Dilation Catherer, Entry Profile 0.017 Crossing Profile 0.032 Proximal Shaft 2.2Fr, Over Spv Hypotube Distal 2.6 Fr, Size : 1.5, 2, 2.5, 2.75, 3, 3.25, 3.5, 3.75, 4 Mm Length: 10, 15, 20, 30 ( Dcgi Approved ) , Platinum - Iridium Stents For Large Vessels - Covered And Uncovered - For Use In Large Vessels , Peripheral Drug Eluting Balloon - 0.035 Guide Wire Compatible-, Balloon Size : 4 Mm-7Mm / Length : 40 Mm - 150 Mm , Peripheral Drug Eluting Balloon - 0.018 Guide Wire Compatible-, Balloon Size : 4 Mm-7Mm / Length : 40 Mm - 120 Mm , Sirolimus Eluting Pheripheral Balloon Nanolute Nano Carrier Drug Eluting Tecnology. Low Crossing Profile, Size : 5Mm- 9 Mm, Length 40Mm-100Mm , Peripheral Otw Balloons- 0.035 Guide Wire Compatible, Balloon Size : 3 Mm - 12 Mm / Length 20Mm-300Mm , Peripheral Otw Balloon- 0.035 Guide Wire Compatible, Balloon Size : 4 Mm - 12 Mm / Length 20Mm - 100Mm , Peri. Otw Balloon- 0.018 Guide Wire Compatible, Balloon Size : 2 Mm - 7 Mm / Length 20 Mm -150 Mm , Peri. Otw Balloon- 0.018 Guide Wire Compatible, Balloon Size : 4 Mm - 7 Mm / Length 20 Mm -300 Mm , Peripheral Otw Balloon- 0.014 Guidewire Compatible, Balloon Size : 1.5 Mm - 6 Mm / Length 20 Mm -210 Mm , Pta Rapid Exchange Balloon Catheter, Balloon Size : 2Mm-- 4Mm / Length : 20 Mm -- 210Mm , Fda Approved Low Profile High Presseure Balloon - Below The Knee, Diameter : 4 Mm To 14 Mm Length 20, 40, 60, 80 Shaft 90 To 150 Mm , Fda Approved Low Profile High Presseure Balloon - Sfa, 6F Compatible Upto 7Mm Dia , Low Profile Balloon Expandable Peripheral Stent System: Balloon Expandable Stentmade Of 316 L Stainless With Slotted Tube Configuration , Pre Mounted On Otw Balloon Catheter , Cannula Design Of The Stent Providing , Excpandable To Vessel Size. , Fda Approved High Pressure Balloon-Carotid , Renal , With 6F Compatible Upto 7Mm Dia , Perpheral Cto Device , Flexible / Standard-0.014Guidewire Compatibility , Perpheral Cto Device , Balloon Size 3.75Mmx1.5Mmx20mm / 2.75Mmx1mmx20mm , Cto Guidewire, Flexible / Standard / Stiff-0.014Diameter, 300Cm Length , Peripheral Balloon, Balloon Diameter=1.5Mm-26Mm=20Mm-300Mm , Peripheral Guide Wire System, Floppy Type / Intermediate Type / Standard Type , Peripheral Wire Hydrophilic, Lenghs-145, 180, 260Cm, Diameter - 0.035-0.038, Angledor Straight , Directional Atherectomy System For Peripheral, Tip Length:6.6Cm -9.6Cm , Peripheral Plaque Excision System, Crossing Profile:2.2Cm-2.7Cm , Peripheral Support Catheter , 135 Cm Thrombus Aspiration Catheter, Outer Diameter :3.9-5.4F , 140 Cm Thrombus Aspiration Catheter, Outer Diameter :3.9F , 145Cm Thrombus Aspiration Catheter, Outer Diameter :3.5F , Thrombus Aspiration Catheter With Hydrophilic Coating, Size-9.8F, Length-140Cm, Internal Diameter -0.070-0.86 , Thrombus Aspiration Catheter Length145cm, Maximum Tip Diameter -1.73, 1.98, Guide Catheter-6.7F , Low Profile Thrombus Aspiration Catheter, Maximum Tip Diameter - 1.40, Length 145Cm , Thrombus Aspiration Catheter With Tapered Silva Tip With Sloped Extraction Lumen, 0.014, Length-140Cm, Rapid Exchange Length 20Cm , Thrombin And Collagen Based Flowable Hemostat For Pacemaker Pocket Hemostasis.Thrombin Vial, Collagen Syringe With Attached Mixing Luer, Diluent Vial, Mixing Accessories, Applicator Tips , Monofilament Suture Type Vascular Closure Device, Puncture Size - 8F-21F , Braided Suture Type Vascular Closure Device, Puncture Size -5F-8F , Mechanical Seal Type Vascular Closure Device, Puncture Size - 5 / 6, 7 / 8 , Balloon Type Radial Artery Compression Device, Transparent Dual Compression Balloons, With Velcro Straps, Sizes 24-29Cm , Dial Type Radial Artery Compression Deviced , Brachial / Radial Artery Compression Device With Plastic Strap, Adjustable Plastic Strap, Size 21-37 Cm , Pressure-Assisted Radial Artery Compression Device, Inflatable Bulb Type , Pressure-Assisted Radial Artery Compression Device, Inflatable Bulb Type, Sizes 12, 24Cm , Ivc Filter, 30 Cm Filter Diameter, 7 F Size , Embolization Coils-Platinum Type, Material-Platinum, All Available Diameters, All Available Lengths , Embolization Coils-Inconel Type, Material-Inconel, All Available Diameters, All Availabl;E Lengths , Detachable Medusa Multicoil Material-Polymer , Detachable Idc Soft Interlocking Detachable Coils, Platinum Tungsten Alloy , Trufill Pushable Coils, Platinum With Nylon Fiber , Azur Cx Peripheral Coil Detachable 0.018 System, Platinum And Hydrogel , Cyanoacrylate Glue For Embolisation , Poppyseed Oil, Injection As A Radio-Opaque Contract Agent That Is Used To Outline Structures In Radiological Investigetion , Coronary Sinus Balloon Occlusion Catheter.Balloon Diameter -10Mm, 15Mm, Balloon Lengths-10Cm, 20Cm, Catheter Lengths- 80Mm, 100Mm, 200Mm, Guidewire Compatibility -0.025, 0.035 , Drug Eluting Balloon.Balloon Size:1.5Mm-633 / Length: 10Mm-250Mm , Cutting Balloon.Balloon Size: 2Mm-4Mm / Lenth: 6Mm, 10Mm, 15Mm , Scoring Balloon.Balloon Size: 2Mm-4Mm / Length:6Mm, 10Mm, 15Mm , Bypass Graft Balloon.Balloon Size:1.5Mm-6Mm , Tiger Curve Catheter, 5F-6F / 100Cm, Side Hole 1, 3 Curved , Tig Catheter.5F-6F / 100Cm , Tiger Curved Diagnosti Catheter For Radial Angiogram-Sizze:5F / 100 Cm, Soft Catheter With 1:1 Torque Control Internationally Accepted Terumo Quality And Equal Performance Needed For Patient Safety & To Avoid Spasm Of Radial Artery, 5F-6F / 100Cm, , Tiger Curved Diagnosti Catheter For Radial Angiogram-Sizze:5F-6F / 100 Cm, , Tig4, ( Tiger Curved ) Diagnostic Catheter, Size:5F-6F / 100 Cm, Soft Catheter With Torque Control Internationally Accepted Terumo Quality And Equal Perfomance Needed For Patientn Safety & To Avoid Spasm Of Radial Artery, 5F-6F / 100 Cm, , Tig4.5, ( Tiger Curved ) Diagnostic Catheter, Size:5F-6F / 100 Cm, Soft Catheter With Torque Control Internationally Accepted Terumo Quality And Equal Perfomance Needed For Patientn Safety & To Avoid Spasm Of Radial Artery, 5F-6F / 100 Cm, , Tig4, ( Tiger Curved ) Diagnostic Catheter, Size:5F / 6F / 100 Cm, Soft Catheter With Torque Control Internationally Accepted Terumo Quality And Equal Perfomance Needed For Patients Safety & To Avoid Spasm Of Radial Artery, 5F-6F / 100 Cm , Pigtail, 5F & 6F / Lengths 100, 110 & 125Cm, Side Holes 6 & 12 , Angled Pigtail Catheter, 5F & 6F, Curves 145 & 155, Length 100, 110 & 125 Cm, Side Holse 6 & 12 , Glidecath Hydrophilic Catheter , 5F-6F / 100 Cm, 125 Cm , Multipurpose ( Mpa1, A2, B1, B2 ) Diagnostic Catheter , 5F-6F / 100 Cm , Cerebral Diagnostic Catheter, 5F-6F / 100Cm , Amplatz Catheter Left / Right-Ar / Al1, 2 Diagnostic Catheter, 5F-6F / 100 Cm , Judkins Right / Left Diagnostic Catheter ( Jr / Jl ) , 4F-7F / 100 Cm, 125 Cm , Mother And Child Catheter-Size-5F-8F / Length 25 Cm, 5F-8F, Rapid Exchange Length 25-Cm , Mother And Child Catheter Size-6F / Extension Length 15 Cm , Nrt ( No Torque Right ) Catheter, Useful For Engaging Anteriorly Angulated Bypass Graft ( Including Lima From The Left Radial Approch & Rima From The Femoral Approach , Unique Hydrodynamic Surface For Low Resistance -5F & 6F-Large Inner Lumen-Superior Kink Resistance-1-To 1Torque Catheter With Double Wire Stainless Steel Braiding In 6F Atraumatic Soft Tip , Catheter Available In5f Results In Very Low Fraction Large Inner Lumen.Superior Kink Resistance 1-To 1 Torque.Atraumatic Soft Tip , Extra Back Up Guiding Catheter For Ptca, 5F-8F / 47-110 Cm, Steel Braided , Judkins Left / Right Guiding Catheter For Ptca, 6F-8F / 47-110 Cm, Steel Braided , Judkins Left / Right Guiding Catheter For Ptca, 6F-8F / 47-110 Cm, Steel Braided , Judkins Right Guiding Catheter ( Paediatric ) , 4F, 5F , Tiger Curve Guiding Catheter For Ptca ( Tr-4 ) , 6F-8F / 47-110 Cm , 3 Dimensional Right Guiding Catheter ( 3Drc ) For Ptca, 6-8F / 47-110 Cm , Contralateral Left Support ( Cls ) Guiding Catheter For Ptca, 6Ff / 47-100 Cm , Extra Backup Left Guiding Catheter ( Xbu ) For Ptca, 6F / 47-110 Cm , Ikari Curve Left Guiding Catheter ( Xbu ) For Ptca, 6-8F / 47-110 Cm , Ikari Curve Right Guiding Catheter ( Xbu ) For Ptca, 6-8F / 47-110 Cm , Internal Mammary Guiding Catheter For Ptca, 6F / 47-110 Cm , Femoral Right Guiding Catheter For Ptca ( Fr ) , 5-8F / 47-110 Cm , Femoral Left Guiding Catheter For Ptca ( Fr ) , 5-8F / 47-110 Cm , Multipurpose Guiding Catheter For Ptca, 6-8F / 47-110 Cm , Voda Right Guiding Catheter For Ptca, 6-8F / 47-110 Cm , Voda Left Guiding Catheter For Ptca, 6-8F / 47-110 Cm , Amplatz Right Guiding Catheter For Ptca, 6-8F / 47-110 Cm , Amplatz Left Guiding Catheter For Ptca, 6-8F / 47-110 Cm , Short Amplatz Right Guiding Catheter, 5-8F, Curve Style 1, 2 , Short Amplatz Right Guiding Catheter, 5-8F, Curve Style 0.75, 1, 1.5, 2, 2.5, 3, 4 , Large Lumen Guiding Catheter, Unique Hydrophilic Coating ( 68 In Middle, 7 Cm Distal And 25 Cm Proximal Is Uncoated. ) Balancing Flexibility And Support.All Curves 5F-8F Are Avilable. , Guiding Catheter For Renal, Size - 7-9 / Length -55, 96 , Peripheral Guiding Catheter, Size -6-8 / Length -55, 90 , Peripheral Guiding Catheter, 6F, 50 Cm Length , Peripheral Guiding Catheter, 7F, 50Cm Length , Peripheral Guiding Catheter, 8F, 50Cm Length , Peadiatric Diagnostic Catheters, Catheter Make With Sixteen Stainless Steel Wire Braids To Impart 1:1 Torque Control To Catb147:B285heter Tip And Maximize Pushability, Made Of Nylon Material Which Resists Softening During Prolonged Catheter Manipulation.Short, Flexible Atraumatic , Balloon Floatation Right Heart Catheter : Balloon Tipped Catheters For Rigth Heart Study, For Pressure Measurement - Single / Double Lumen..Internationally Accepted Quality And Equal Performance Needed For Patient Safety. , Balloon Floating Right Heart Catheter : Balloon Tipped Catheters For Rigth Heart Angiography - With Multiple Holes.Internationally Accepted Quality And Equal Perfomance Needed For Patient Safety , Carotid Guiding Catheter ( Guide Catheter For Neuro ) , Size :7-9 / 55, 96 , Sheathless Guiding Catheter For Ptca, 6.5 To 7.5 F, 89 Cm Length , Support Catheter For Flush Total Occlusion And Angulated Lesions - Straight, 7Fsize, 7-110 Cm Length , Support Catheter For Flush Total Occlusion And Angulated Lesions - Tapered, 7Fsize, 7-110 Cm Length , Support Catheter For Flush Total Occlusion And Angulated Lesions - Angled, 7Fsize, 7-110 Cm Length , Support Catheter For Flush Total Occlusion And Angulated Lesions - Angled Tapered, 7Fsize, 7-110 Cm Length , Support Catheter For Flush Total Occlusion And Angulated Lesions - Tapered, 6Fsize, 83-130 Cm Length , Support Catheter For Flush Total Occlusion And Angulated Lesions - Angled Tapered, 6Fsize, 83-130 Cm Length , Guide Extension Catheter, 120 Cm Proximal Hypotube Shaft, 0.057 ( 1.45 Mm ) Innerdiameter, Hydrophilic Coating, Atraumatic Tip, Extended Length 25 Cm, 2 Radio -Opaque Markers , Guidewire Reentry Catheter With Guidewire, Catheter : Self Orienting Flat Balloon Length 10Mm, 180Cm Opposed Proximal And Distal Ports With Markers, Working Length -135 Cm , Multiple Side Hole - Infusionwire, Diameter:0.035 / Length:145 Cm-175 Cm , Multiple Side Hole - Infusion Catheter, Diameter:2.9Mm / Length:150Cm-180Cm , Reinforced 18 Endhole-Infusion, Diameter : 2.8Mm / Length:135Cm-Cm-158Cm , Reinforced 27 Microcatheter, Diameter :2.8Mm -2.8Mm / Length:135Cm-Cm-150Cm , Peripheral Support Micro Catheter 2.6 Fr; 0.18 Compatible, 150Cm , Wire Control Catheter - Cs Catheter, Length-70Cm, Inner Diameter-0.018 , Wire Control Catheter - Otw / Rx, Length-140, 145Cm, Inner Diameter-0.018 , Multitrack Catheter : Angiographic And Hemodynamic Assessment Catheter, Distal Tip Offset From Catheters Central Lumen To Perfom Angiography Without Removing Guidewire, Precisely Control Pull-Back Or Push-Up Pressure Tracings, Place Multiple Catheters On A Single Guidewire , Micro Porous Ptfe Balloon Catheter, 0.014 Guide Wire Compatible , Double Lumen Otw Catheter For Bifurcation Lesions, 0.014 Guide Wire Compatible, Length -140Cm , Focal-Force Pta Balloon Catheter, 0.035 Compatible, Balloon Diameters-5Mm-12Mm, Balloon Length -4Cm, Catheter Lengths-50, 80, 135Cm , Flow-Directed Balloon Catheter, Size-5.3F, Catheter Length -80Cm, Diameter - 10Mm, Volume-1 Ml , Dual Balloon Ostial Angioplasty Catheter, Balloon Diameter- Distal: 3, 3.35, 4, 4.5Mm; Porximal: 11Mm Maximum, Catheter Length-135Cm, Balloon Length- Distal: 8;Proximal: 10Cm, Inflation Volume0.4-Ml ( Proximal ) , Dual Balloon Ostial Angioplasty Catheter, Balloon Diameter- Distal: 3, 3.35, 4, 4.5Mm; Porximal: 11Mm Maximum, Catheter Length-135Cm, Balloon Length- Distal: 8;Proximal: 10Cm, Inflation Volume0.4-Ml ( Proximal ) , Dual Balloon Ostial Angioplasty Catheter, -Otw, 6.6F, Balloon Diameters- Distal: 6, 7Mm Proximal: 14Mm Maximum, Balloon Lengths-Distal:12, 17Cm; Proximal:14, 15Cm , Cryoplastyt Catheter System For Peripheral Bperalloon Angioplasty, 8F, Balloon Diameters-2, 2.5, 3, 3.5, 4, 5, 6, 7, 8Mm, Balloon Length-40, 100, 150Cm , Targeted Drug Delivery System, 7F, Adjustable Dual Occlusion Balloons With Diameters-2.5-10Mm, Balloon Length-1Cm , Conformable Occlusion Balloon System For Asymmetric Vessels, Balloon Lengths-7Mm-15Mm, Balloon Diameters-3, 4, 7Mm , Occlusion Balloon System For Distal Vessels, Balloon Lengths-10Mm-30Mm, Balloon Diameters-3, 4, 5Mm , 2.8F Proximal Size Microcatheter For Retrograde Approach, Stainless Coil Shaft With 10 Braided Wire, Distal Size:1.26 F / 150 Cm Length , 2.1F Proximal Size Specialty Micro Catheter, Long Taper With Platinum Tip And Stainless Steel Rope, Distal Size:1.8F / 135Cmlength , 2.6 Fr Proximal Size Specially Micro Catheter, Ong Taper With Platinum Tip And Stainless Steel Rope, Distal Size:2.1 Fr / 135Cm Length , 2.9 Fr Proximal Size Ordinary Micro Catheter, Distal Size:2.2-2.4 Fr / 150 Cm Length , 130 & 150 Cm Stainless Steel Braide, Hydrophilic Coating, Tapered Inner Shaft With Floppy Distal 13 Cm Segment, Proximal Size 2.6F, Distal Size 1.8F, Radio Opaque Tip , Micro Catheter: Tip 1.4Fr Hydrophilic Coated Shaft Length 135 Cm, Shaft Outer Diameter:Distal -1.9Fr, Proximal:2.6Fr, Shaft Inner Diameter-Distal:0.017Fr, Proximal:0.022Fr With Unique Braiding For Flexiblity And Kink Resistance , 2.7F Proximal Size Micro Catheter With 021 Hydrophilic Coating Wire, Tungsten Coil Pitch, Distal 2.9 F, Length 130Cm , Entry Profile 1.6 Fr, Tapered And Robust Tip Material, Braided Shaft Hight Pushability With Hard Proximal Shaft.Shaft Length 135Cm With Hydrophilic Coating 43Cm , 2.8Fr And 2.5Fr Micro Catheter For Used In Small Vessel Or Super Selectiveanatomy.For Pheripheral And Coronary Use, Inner Diameter 0.21&0.25, Length 100, 135, 150Cm , Microcatheter For Delivery Of Micro Coils, Capable Of Injection, Vortec Fiber And Platinum Braided Microcatheter, Length 105 To150cm, Proximal Size 3Fr, Distal Size 2.5Fr, End Hole Diameter 0.021 Inch, With Radio Opal Tip And Hydrophilic Coating , Microcatheter For Delivery Of Micro Coils, Vortec Fiber Braided Microcatheter, Length 130 And 150Cm, Proximal Size 3Fr, Distal Size 2.5Fr, End Hole Diameter 0.021 Inch, With Radio Opal Tip And Hydrophilic Coating , Diagnostic Guidewire-Exchange Length Ptfe Coated, Straight And J Tipped:Diagnostic Guidewire-Single Length Ptfe Coated, Straight And J Tipped:Diagnostic Guidewire-Single Length Ptfe Coated, Stright And J Tipped-018, 021, 025 Inches 260Cm , Diagnostic Guidewire-Single Length Ptfe Coated, Straight And J Tipped:Diagnostic Guidewire-Single Length Ptfe Coated, Straight And J Tipped-018, 021, 025 Inches 150Cm , 185 Cm Long Floppy Work Horse Wire For Ptca-Straight / J Tip-Core Material Stainless Stee , 185 Cm Intermediate Work Horse Wire For Ptca-Straight / J Tip-Core Material Stainless Steel , 185Cm Long Extrasupport Work Horse Wire For Ptca-Straight / J Tip-Core Material Stainless Steel , 182 Cm , 300 Cm, Spring Coil, Core To Tip Design, 0.014 With 0.8 Tip Load, Ptca Work Horse Wire-Straight / J Tip , 190 Cm, 0.014, Hydrophilic Distal 30 Cm & Ptfe Proximal Shaftlong Ptca Work Hortse Wire-Straight / J Tip-Core Material Stainless Steel , 180 Cm Long 0.8 Tip Load, 30 Mm Silicone Coating From Tip, Straight / J Tip-Core Material Stainless Steel , 190 Cm Long 0.8 Tip Load, 12 Cm Spring Coil Length, Stainless Steel High Tension Core-Straight / J Tip , 180 Cm Long 0.5 Tip Load Ptca Work Horse Wire-Straight / J Tip , 180 Cm Long Core To Tip Design, 0.014, 0.7 Tip Load, Hydrophobic, Extra Support Wire, Straight / J Tip , Us Fda Approved 190, 300 Cm Length, Nitinol Core, Ptca Work Horse Wirewith Polymer Sleeve With Soft Tip Load Of <1Gm & Sharping Ribbon Design.7G Tip Load Straight / J Tip , Us Fda Approved 190, 300 Cm Length, Nitinol Core, Ptca Work Horse Wirewith Polymer Sleeve With Soft Tip Load Of <1Gm & Sharping Ribbon Design.7G Tip Load Straight / J Tip , Us Fda Approved 190, 300 Cm Length, Hydrophobic Coating Type Nitinol Core, Ptca Work Horse Wire, With Polymer Sleeve, With Soft Tip Load Of<1Gm &Shaping Ribbon Design.7G Tip Load Straight / J Tip , Us Fda Approved 190 Cm Long, Tip Load-0.8 Floppy Work Horse Wire For Ptca , Straight / J Tip, Core Material Stainless Steel, Polymer Tip, Core To Tip Design, 0.014 With 0.8 Tip Load, With Hydrophilic Tip And Light Support , Us Fda Approved 190 Cm Long, Tip Load-1 Intermediate Work Horse Wire For Ptca , Straight / J Tip, Core Material Stainless Steel, Polymer Tip, Core To Tip Design, 0.014 With 0.8 Tip Load, With Hydrophilic Tip And Light Support , Us Fda Approved 190 Cm Long, Tip Load-1.2 Extra Support Work Horse Wire For Ptca , Straight / J Tip, Core Material Stainless Core Material Stainless Steel, Polymer Tip, Core To Tip Design, 0.014, With Hydrophilic Tip And Light Support , 195Cm- Length Hydrophilic Coating-33Mm, 0.014 Diameter ( Floppy, Intermediate, Standard ) Work Horse Wire For Ptca, Straight Tip / J Tip , Hydrophilic Coating-33Mm, 300Cm-Length, 0.014 Diameter ( Floppy, Intermediate, Standard ) Work Horse Wire For Ptca, Straight Tip / J Tip , 190 Cm Long, Tapering To 0.009, 0.8 Load Cto Wire For Ptca, Tapered Tip , 190 Cm Long, 0.014 Tapering To 0.010, Hydrophilic, 1Gm Tip Load Cto Wire Ptca Tapered Tip , 300Cm Length, 0.014 Diameter, Straight Tip Shape, 0.8 Tip Load Double Length Cto Wire For Ptca, Straight Tip , 300 Cm Long, Tapered Tip 0.6 Tip Load Cto Wire For Ptca, Tapered Tip , 180 Cm Length, 0.014 Diameter, Straight Tip Shape, 0.8 Tip Load Double Length Cto Wire For Ptca Straight Tip , 180 Cm Length, ( Straight Tip Shape, 3.4.5 Tip Load Cto Wire For Ptca, Silicone Coating Over Spring Coil, Straight Tip , 180 Cm Length, ( Straight Tip Shape, ) 6 -12 Tip Load Cto Wire For Ptca Straight Tip , 180 Cm Length, 9-12 Tip Load Cto Wire For Ptca ( Tip Shape Straight ) , Tapered & Straight Tip , 180 Cm Length, 20 Tip Load Cto Wire For Ptca ( Tip Shape Straight ) , Tapered & Straight Tip , 180 Cm Length 1 Tip Load Cto Wire For Ptca ( Tip Shape Straight ) Hybrid Wire That Fuses Nitinol & Stainless Steel, 180 Cm & 300 Hydrophillic Coating Over The Distal 24.8 Cm Of The Distal Tip, Silicone Tip On The Distal 2Mm, Nitinol Floppy Tip, Straight Tip , 180 Cm Length 3.6 Tip Load Cto Wire For Ptca ( Tip Shape Straight ) Hybrid Wire That Fuses Nitinol & Stainless Steel, 180 Cm & 300 Hydrophilic Coating Over The Distal 24.8 Cm Of The Distal Tip, Silicone Tip On The Distal 2Mm, Nitinol Floppy Tip, Straight Tip , 180 Cm Length 3.6 Tip Load Cto Wire For Ptca ( Tip Shape Straight ) Hybrid Wire That Fuses Nitinol & Stainless Steel, 180 Cm & 300 Hydrophillic Coating Over The Distal 24.8 Cm Of The Distal Tip, Silicone Tip On The Distal 2Mm, Nitinol Floppy Tip, Straight Tip, 1:1 Torque , Fda Approved 190Cm Length 1.7, Tip Load Cto Wire For Ptca ( Tip Shape Straight ) , Stainless Steel Core, Core To Tip Design, 0.014 Wire With 0.010 Tip & Hydrophilic Coating, Straight Tip , Fda Approved 190Cm Length 4.7, Tip Load Cto Wire For Ptca, Steel Core, Spring Coil Tip, Stainless Steel Core, Core To Tip Design, 0.010 Tip, Hydrophilic Tip Coating, Tip Shape Straight, Straight Tip , Us Fda Approved 190 Cm, 300 Length, 1.5 Tip Steel Core, Polymer Tip, Core To Tip Design, 0.014 Wire With Tip Load Of 1.5 Gm, Hydrophillic Coating, Cto Wire For Ptca, J Tip , Us Fda Approved 190 Cm, 300 Length, 2.7 Tip Steel Core, Polymer Tip, Core To Tip Design, 0.014 Wire With Tip Load Of 2.7 Gm, Hydrophillic Coating, Cto Wire For Ptca, J Tip , 190Cm, 300 Length, 4.1 Tip Steel Core, Polymer Tip, Core To Tip Design, 0.014 Wire With A Tip Load Of 4.1 Gm Hydrophilic Coating Load Cto Wire For Ptca, J Tip , 330Cm Length, 3 Tip Load Cto Wire For Ptca, Tip Shape Straight, For Guidewire Externalisation For Retrograde Procedures , Us Fda Approved 190 Cm Length, 4.8-9.7 Tip Load Cto Wirefor Ptca, Spring Coil Tip, Court To Tip Design, 0.012 Diameter, Straight Tip , Us Fda Approved 190 Cm Length, 12.5-13.3 Tip Load Steel Core, Coil Tip, Core To Tip Design, 0.010 To 0.009 Tapered Tip, Cto Wire For Ptca ( Tip Shape Straight, Hydrophilic Coating Straight Tip , 190 Cm, 300 Cm Length, 0.014 Tapering To 0.010, 1.7 Tip Load Cto Wire For Ptca, Tapered Tip, 1 Mm Preshaped Tip, Microcone Tip , 190Cm, 300 Cm Length, 0.014 Tapering To 0.010, 1.7 Tip Load Cto Wire For Ptca, Tapered Tip, 1Mm Preshaped Tip, Microcone Tip , 190Cm, 300 Cm Length, 0.014 Tapering To 0.011, 3.5 Tip Load Cto Wire For Ptca, Tip Shape Tapered, Tapered Tip 1Mm Preshaped Tip, Microcone Tip , 0.018 Diameter Peripheral Floppy Wire ( Tip Shape Straight / Length 80, 180, 300Cm, Straight Tip , 0.025 Diameter Peripheral Floppy Wire ( Tip Shape Straight / Length 80, 260, 300Cm, Straight Tip , 0.035 Diameter Peripheral Wire ( Tip Shape Straight / Length 180, 260Cm, Straight Tip , 0.018 Diameter Peripheral Intermediate Wire ( Tip Shape Straight / Length 80, 180, 300Cm, Straight Tip , 0.018 Diameter Peripheral Standard Wire ( Tip Shape Straight / Length 80, 180, 300Cm, Straight Tip , 0.025 Diameter Peripheral Intermediate Wire ( Tip Shape Straight / Length 260, 180, 300Cm, Straight Tip , 0.025 Diameter Peripheral Standard Wire ( Tip Shape Straight / Length 260, 180, 300Cm ) Straight Tip , 195Cm-Length, Hydrophilic Coating-35Mm, 0.014”Diameter, ( Tip Load-12G ) , Straight Tip / J Tip , Hydrophilic Coating-35Mm, 300Cm-Length, 0.014”Diameter, ( Tip Load-12G ) , Straight Tip / J Tip , 195Cm-Length, Hydrophilic Coating-33Mm, 0.014”Diameter, Stainless Steel Coil Length-26Mm, Floppy & Standard, J Tip , Hydrophilic Coating-33Mm, 300Cm-Length, 0.014”Diameter, Stainless Steel Coil Length-26Mm, Floppy & Standard, J Tip , 195Cm-Length, Hydrophilic Coating-27Mm, 0.014”Diameter, With Polymer Cover, Floppy, Intermediate, Standard, Straight Tip / J Tip , Hydrophilic Coating-27Mm, 300Cm-Length, 0.014”Diameter, With Polymer Cover, Floppy, Intermediate, Standard, Straight Tip / J Tip , 185Cm-Length, Hydrophilic Coating-40Mm, 0.014 Diameter, Stainless Steel Coil Length-2 Cm, Floppy, Intermediate, Standard, Straight Tip / J Tip , Hydrophilic Coating-40Mm, 300Cm-Length, 0.014”Diameter, Stainless Steel Coil Length-2Cm, Floppy, Intermediate Standard, Straight Tip / J Tip , Fda Approved Nitinol Wire With Soft & A Traumatic Tip With Hydrophilic Coating At The Distal End & Hydrophobic At The Proximal End Core To Tip Design, 0.8 G Tip Load, Straight Tip / J Tip , Extra Support Wire Guide For Neonatal Internations:Nitinol Core, Pte Coating, Flexible Platinum Tip.1:1 Torque Control.014 And 018 Inch, 180, 270 And 300 Cm Length.Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety , Ptfe Guidewire:018, 021, 025 Inch, Regular And Exchange Length , Fda Approved Nitinol Wire With Soft & A Traumatic Tip For Excellent Torque And Tip Control With.9G Tip Load, Stainless Steel, Straight Tip / J Tip , Fda Approved Peripheral Guide Wire For Cto, Stainless Steel With Microglide Coating, 4.8 To 13 Gm Tip Load, 190, 300Cm Length , Doc Extension 0.14-0.018 X 145 Cm, Can Be Detached After Use, Designed To Provide The Necessary Length To Allow The Exchange Of One Catheter For Another While Maintaining The Position Of The Guide Wire In The Artery , Heparin Coated Braided Nitinol Filter With Gold-Tungsten Loop, 3-6Mm Lumen Size Distal Embolus Protection Device For Svg Interventions, 0.014”, Wire Length:Otw / Rx:190 / 320 Heparin Coated Filter Size:3-6Mm , 0.018” Wire, Braided Nitinol Heparin Coated Filter With Gold-Tungsten Loop, 3-7Mm Lumen Size Distal Embolic Protection Device For Carotid Internations Compatible Vessel Diameter-2-7Mm, Heparin Coated Filter , Braided Nitinol Heparin Coated Filter With Gold-Tungsten Loop, 0.018”Wire, 3-7Mm Lumen Size Distal Embolic Protection Device For Lower Limb Interventions, Compatible Vessel Diameter-2-7Mm, Heparin Coated Filter , Polyurethane Filter Pore Size-110 Micron With Nose Cone, 2.25-3.5F Lumen Size Distal Embolic Protection Device For Carotid Interventions, Wire Length: Otw / Rx:190 / 300 Filter Size:3-7F , 3.5-5.5F Lumen Size, Polyurethane Filter For Size-110 Micron With Nose Cone, Digital Embolical Protection Device For Carotid Interventions, Wire Length:Otw / Rx :19 / 300 Filter Size 3-7F , Guidewire With 90 Rotated Filter Basket With Obturator, Pore Size 150 M Distal Embolic Protection System, Compatible Vessel Diameter-3.25-7 Mm , Self Centering Umbrella Design Filter With 8 Nitinol Structs, Embolic Capture Guide Wire System For Carotid Interventions, Compatible Vessel Diameter-3-7.5 Mm , Barewire Filter Delivery Wire Type Distal Protection Device For Coronary Interventions, Unconstraint Filter Diameter 5.0 Mm, Compatible Vessel Diameter-2.5-4.8 Mm, With 120M Pore Size , Barewire Filter Delivery Wire Type Distal Protection Device For Peripheral Interventions, Unconstrained Filter Diameter-7.2Mm, Compatible Vessel Diameter-4.0-7.0 Mm , Polyethylene Terephthalate Type Filter Distal Embolic Protection Device, Compatible Vessel Diameter-3.5-7 Mm , Ptfe Type Distal Protection Device, Filter With 100 Micron Poresand Hydrophyllic Heparin Coating With Diamond Frame, Distal Protection Device-Filter , Proximal Cerebral Protection Device, Reference Common Carotid Artery Diameter-13Mm , Squeeze Handle With Prime Lock Inflation Devices, Pressure Range:0-13 / Barrel Volume:20 Ml , Ordinary Handle Latch Type Inflation Device, -Pressure 0-30 , Inflation Device, Piston Handle Type Intra-Cam Locking Mechanism, Barrel Volume-20 Ml, Pressure Range: 0-13 , Inflation Device, Very High Pressure Pressure Range:0-50 Atm , High Pressure Inflation Device Piston Handle With Finger Latch Mechanism, Barrel Volume-20Ml, 0-30 , Fda Approved Inflation Device With 20 To 30 Atmosphere , Inflation Device Maximum Pressure Of 13 Atm, 20 Ml Clear Syringe Barrel With Smooth Moving Plunger, Self Locking Mechanism For Easy Locking As Well As Gradual And Rapid Pressure Release Ergonomic Handle And Precision Manometer , Silicon Value Material Type Y Connector, Bonded Extension Tube Length 20Cm, Push-Full Type Hemostatic Value , Ordinary Y Connector, Bonded Extension Tube, Push-Pull Type Hemostatic Value , Rotating Y Connector With 2 Way Adjustable Value, Rotating Y-Connector / 2-Way Adjustable Value , Rotating Double Y Connector With 3 Way Adjustable Valve, Rotating Double Y Connector / 3-Way Adjustable Value , High Pressure Residence Y Connector, Pressure Resistance Of At Least 8 Atm, Push Pull Type, Inner Lumen Diameter-0.025, Guidewire Compatibility-0.010, -0.014 , Ptca Y Connector 400 Kpa Leak-Proof Seal From Proprietary Designed Value, Open And Close By Twisting 7F-9F Compatible Lumen Allowing Delivery For Wide Range Of Devices And Torque And Introduce The Fit 0.014- 0.02.1 Guidewire , Hemostatic Valve:Hemostasis Assembly To Prevent Bleeding From Ends Of Catheters, With Facility Of Side Arm For Flushing And Injection. Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety , Puncture Needle ( Radial ) -Cook Model , Puncture Needle ( 16G, 18G, 7Cm, 20Cm ) , Puncture Needle ( 20G, 21G, 4Cm ) , Peadiatric Pericardiocentasis Kit: Soft Atramatic, Radio Opaque Pigtail Catheter, 5Fr, 30Cm Long, With Compatible Needle And Guide Wire. Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety , Micro Puncture Needle Multipurpose , Micro Puncture Introducer Set; 21 G, 0.018, 4 French , Micro Puncture Set For Pedal Access With Nitinol Guide Wire With Hemostatic Value , Radial Sheath With Nitinol Guide Wire For 4F- 6F / Length 5-7 Cm Wire Length 45Cm, Wire Dimension 0.025 , Radial Sheath With Nitinol Guide Wire, 4F-6F / Length 5-7 Cm Wire Length 45 Cm, Wire Dimensions 0.025 , Radial Sheath 11 Cm Long, Size-4-6F, Length-11Th Cm, Guide Wire-0.025 , Radial Sheath 11Cm Long, Size-4-6F, Length-11Cm, Guide Wire-0.021 , Radial Sheath 5& 7.5Cm Long, Size-4-6F, Length- 5 & 7.5Cm, Guidewire-0.021 , Radial Sheath With Nitinol Guide Wire-Sheath Size Ranging From 6F, Length Ranging From 7 Cm-Wire Length 45 Cm, Wire Diemension 0.025, Cross-Cut Haemostasis Value Effectively Avoids Blood Reflux And Air Aspiration , Radial Sheeth 10 Cm Long Guide Wire 0.025 ( Plastic ) With Unique Thin Wall Structure For Perform Procedure With Out Of Upsizing To A Large Sheath With International Terumo Quality. , Ts Femoral Sheath: 23 Cm Long Input Ts Femoral Sheath With 0.038 Inch Guide Wire 6F , Ts Femoral Sheath: 11 Cm Long Input Ts Femoral Sheath With 0.038 Inch Guide Wire 6F , 5 Cm Long Paediatric Femoral Sheath With 0.021 Inch Guide Wire 4-6F Size , Femoral Sheath-Adult 0.035 Guide Wire 4-9F Size , 25 Cm Long Size Femoral Sheath Size Ranging From 6F With Guide Wire , 24 Cm Long Femoral Sheath With 0.018-0.038 Inch Straight Tip Guide Wire 3-9F , 25 Cm Long Femoral Sheath Without Guide Without Wire But Compatible With 0.038 Wire 10-14 F , 13-80 Cm Long Large Value Femoral Sheath 9-18 F , 5.5-23 Cm Long Radial Sheath With 0.018 Inch Guide Wire 4-6F , 5-45 Cm Long Small Value Femoral Sheath 4-8F , 90 Cm Long Brite Tip Interventional Sheath 4-1 , 23 Cm Long Input Ts Femoral Sheet With 0.038 Inch Guide Wire 5-11F , Peadiatric Long Sheath:Long Guiding Sheath With Haemostasis Value Hydrophilic Coating And Radio Opaque Band All Available French Size Including 4 And 5 Fr Old Curves Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety , Peadiatric Diagnostic Catheters:All Lengths, All Curves 4F And 5F Compatible , 28 Cm Long Sentrant Introducer Sheath With The Hydrophilic Coated Guide Wire 12-26 F , Prelude Act Sheath Introducer, 4.5-8.5 F , Prelude Ease Hydrophilic Femoral Sheath 4-7F , 16 Cm 45 Cm Long Adelante Peel Away Femoral Sheath 6-12.5F , 7 Cm-25 Cm Long Adelante Radial Witty Haemostatic Value And Sideport For Optimal Radial Access 4-6F , 4 Cm-6Cm Long Femoral Sheath With 0.021 Inch Guide Wire 10-25F , 5 Cm 35 Cm Long Ultimum Femoral Sheath 4F-22F , 5.5 Cm Long Femoral Sheath, 4F-11F Size , 10 Cm Long Femoral Sheath-Paediatric, 4F-11F Size , 11Cm Long Femoral Sheath, 4F-8F Size , 23Cm Long Femoral Sheath, 4F-8F Size , 23Cm Long Femoral Sheath, 9F-11F Size , Femoral Sheath 11 Cm Long Size Ranging From 6F Length- 11 Cm Guidewire-038 Kink Resistant Cannula Design Integrating A Soft Flexible Inner Layer With A Stiffer Outer Layer Designed To Increasing Bendability And Support And A Decree Kinking , Femoral Sheath 11 Cm Long Size Ranging From 7F Length- 11 Cm Guidewire-038 Kink Resistant Cannula Design Integrating A Soft Flexible Inner Layer With A Stiffer Outer Layer Designed To Increasing Bendability And Support And A Decree Kinking , Long Metalic Sheath Flexible And Kink Resistant Length:45 Cm & 7F , 25 Cm Long Size Femoral Sheath 5F-11 F , 45-98 Cm Long Femoral Sheath With 0.035-0.038 Curved Tip Guide Wire, 5-8F , 5.7-11 Cm Long Femoral Sheath With 0.021-0.038 Double Ended 3Mm J And A Straight Tip Guide Wire 4-9F , Long Guiding Sheath With Haemostasis Valve, Hydrophilic Coating And Radio Opaque Band, All Available French Size Including 4 And 5Fr Mullins Curve And Children’S Hospital Of Boston Curve. Internationally Accepted Cook Quality And Equal Performance Needed For Patient , Long Guidings Sheath With Coil-Reinforce The Construction For Kink Resistance With Ptfe Coated Large Lumen With Hydrophilic Coating And Radio-Opecq Band At The Tip, Of 4 To 12 Fr Sizes, All Available Tip Curved ( Straight, Mp, Rdc, Cobra ) , Lengths 45, 55, 71, 10 To Cms , Straight Hub, Fep Polymer, Radio Opaque, 16-20 G Puncture Needle , Hydrophilic Guide Wire Black ( 0.018-0.038 X 80 Cm-180 Cm ) Angled / Straight Tip Type , Hydrophilic Guide Wire Black ( 0.35, 150 Cm ) Angled / Straight Tip , Hydrophilic Guide Wire Black ( 0.35, 260 Cm ) Angled / Straight Tip Type , Hydrophilic Guide Wire Black ( 0.018-0.038 X 260 Cm ) , Angled / Straight Tip Type , Terumo Type Hydrophilic Guide Wire ( 0.018-0.038 X80 Cm-180 Cm ) , Angled / Straight Tip Type , Terumo Type Hydrophilic Guide Wire, 0.35X150, Angled / Straight Tip Type , Terumo Type Hydrophilic Guide Wire, 0.35X260, Angled / Straight Tip Type , Terumo Type Hydrophilic Guide Wire, ( 0.018-0.038 X 260 Cm ) , Angled / Straight Tip Type , 150 Cm Hydrophilic Guide Wire, Blue, ( 0.018-0.038 X 80Cm-180 Cm ) , Angled / Straight Tip Type , Exchange Length Hydrophilic Guide Wire Black ( 0.018-0.038 X 260 Cm ) , Angled / Straight Tip Type , Diagnostic Guide Wire Single Length , ( 0.018-0.038X 80 Cm 180 Cm ) , Angled / Straight Tip Type , Ptfe Coated Guidewire: ( 0.035 X 150 Cm ) , Angled / Straight Tip Type , Ptfe Coated Guidewire: ( 0.035 X 260 Cm ) , Angled / Straight Tip Type , Diagnostic Guide Wire, ( 0.018-0.038 X 260 Cm ) , Angle / Straight Tip Type , Ptfe Coated Guide Wire: ( 0.018-0.038X 80 Cm ) , Angled / Straight Tip Type , Ptfe Coated Guide Wire: ( 0.018-0.0 38 X 260 Cm ) , Angled / Straight Tip Type , Amplatz Wire, Lengths- 260, 300Cm, Tip- Straight / Shapable, 0.035” , Amplatz Wire, Lengths- 150 Cm, Tip- Straight / Shapable, 0.035” , Amplatz Wire, Super Stiff, Lengths- 260, 300Cm, Tip- Straight / Shapable, 0.035” , Amplatz Wire, Super Stiff, Lengths- 150 Cm, Tip- Straight / Shapable, 0.035” , Amplatz Wire, Extra Stiff, Lengths- 260, 300 Cm, Tip- Straight / Shapable, 0.035” , Amplatz Wire, Extra Stiff, Lengths-150Cm, Tip- Straight / Shapable, 0.035” , Amplatz Wire, Lengths- 260, 300 Cm, Tip- Straight / Shapable, 0.035” , 2.3-3F Size Coronary Microsnare, Length 150, 175 Cm , 3.2F Size Coronary Snare, Length-150 Cm , 4-6F Size Coronary Snare, Length-102 Cm , 6-7 F Size Coronary Snare, Length-100 Cm , Catheter Outside Diameter:4F-6F, Catheter Length:48Cm-102Cm For Snare Replacement , Peripheral Snare, Size:9-11 F / Length:63, 58Cm , Single Loop , Intravascular Snare- Triple Loop Type ( Multiplane ) , Balkin Sheath, 5.5F-7F, Length-40, 45Cm , Mullins Sheath ( Peadiatric ) , 6F-9F , Mullins Sheath , 10F, 9F , Pda Device ( Fda / Ce Approved ) Duct Occluder Type 1- All Sizes , Pda Device ( Fda / Ce Approved ) , Duct Occluder Type 2- All Sizes , Pda Device ( Fda / Ce Approved ) , Duct Occluder Type 1- All Size Duct Occluder Type 2 - All Sizes , Pda Coils ( Fda / Ce Approved ) , All Sizes , Pda Occluder D2 / D3 Diameters Ranging From 3.5 / 5 To 14 / 18Mm With Deliverycable Included , Pda Coils ( Dcgi Only ) , All Aizes , Coils For Pda Closure, Detachable Coil Made From Inconelmaterial, With Synthetic Fibre, Mri Compatible. Compatible Delivery System-Tfe Coated Stainless Steel Delivery Wire With A Straightening Mandril And Pin Vise Handle For Detachment. Pda Closure Access Procedure Pack With Introducer, Catheter And Delivery System , Embolization Coils For Use In Peripheral Vasculature , Made Of Inconel Material , With Synthetic Fibres , Mri Compatible, Delivered Through Catheter Internal Diameters 0.035 And 0.038 Inches , All Diameters ( 2- 45Mm ) And Lengths ( 2-16Cm ) . Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety , Catheters With Easy Trackability For Coil Delivery- Hydrophilic Coated, Single And Double Braided With Stainless Steel, 4Fr And 5Fr , Lengths 65Cm To 150Cm , All Tip Shapes.Internationally Accepted Terumo Quality And Equal Performance Needed For Patient Safety , Vsd Device ( Muscular ) ( Fda / Ce Approved ) , All Sizes , Vsd Device ( Muscular ) ( Dcgi Only ) , All Sizes , Vsd Device ( Membranous Symmetric ) ( Fda / Ce Approved ) , All Sizes , Vsd Device ( Membranous Symmetric ) ( Dcgi Only ) All Sizes , Vsd Device ( Membranous Asymmetric ) ( Fda / Ce Approved ) , All Sizes , Vsd Device ( Membranous Asymmetric ) ( Dcgi Only ) , All Sizes , Asd Device ( Fda / Ce Approved ) , All Sizes , Asd Device ( Dcgionly ) , All Sizes , Asd Device / Detachable Cable, Amplatzer Multi- Fenestrated Septal Occluder - Cribriform , Asd Peadiatric Sizing Balloon : Extra High Inner Lumen Strength, Radiopaque Inner Tubing, Radiopaque Marker Bands At 10Mm Distance On The Balloon, Length 1Cm To 6Cm ; Diameter 10Mm To 40Mm. Internationally Accepted Cook Quality And Equal Performance Needed , Asd Device With Delivery Cable Included- Waist Diameters Ranging From 4Mm To 40 Mm , Low Profile Vascular Occlusion Device: Low Profile Vascular Occlusion Type Of Device Made Of Nitinol Multilayer With Six Occlusive Planes , Diameter Ranging From 3- 22Mm , Length 6- 18Mm . Compatible Delivery System For Same. , Extremely Low Profile Vascular Occlusion Type Of Device Made Of Nitinol, With Multilayered Double Lobe Design , Deliverable Through Diagnostic Catheter, Diameter 4- 8 Mm And Length 10- 13.5Mm . Compatible Delivery System , Very Low Profile Pda Occlusion Device, Deliverable From Arterial / Venous Side With Three Articulated Mesh Lobes Providing Six Occlusive Planes , With Fabric Free Technology, Device Diameter 3-6 Mm , All Length And Disc Sizes. Compatible Delivery System And Guide Wire , Balloon Atrial Septostomy ( Bas ) Otw Balloon, Balloon Dia : 9.5Mm- 13.5Mm / Length : 0.95Mm - 1.35Mm ) 4 F & 5 F , Balloonatrial Septostomy Direct ( Bas ) Balloon, Balloon Dia: 9.5Mm - 13.5Mm / Length: 0.95Mm - 1.35Mm ) 4F & 5F , Asd Sizing Balloon, Balloon Diameter- 10Mm - 40M / Length- 10Mm - 60Mm , Device Loader For Asd , Vsd , Pda , Balloon Aortic Valvuloplasty ( Bav ) Balloon, Balloon Dia 4Mm - 26Mm / Length: 10Mm - 40Mm , Balloon Pulmonary Valvuloplasty ( Bpv ) Balloon, Balloon Dia : 4Mm - 26Mm / Length: 10Mm- 100Mm , Bav Kit, , Bpv Kit , Nih Catheter , 4F - 7F , Goodale - Lubin Catheter , 4 F - 7F , Pig Tailcatheter , 4F - 6 F , Berman Angiographic Catheter , 5 F - 7F , Swan- Ganz Wedge Pressure Catheter , 5 F - 7 F , Asd Closure Work - Horse Wire Fixed Core , Diameter- 0.025, 0.038 , Length- 80, 145, 180, 260Cm, Tip - J- Curved & Straig , Asd Closure Work - Horse Wire With Movable Core , Diameter-0.035, Length- 145Cm, Tip - J - Curved , Asd Closure Work - Horse Wire, Diameter- 0.035 , Length-80, 145, 180Cm, Tip- J - Curved & Straight , Pta Catheter With Embolic Capture Feature - 0.014 Compatible, Sheath Compatibility- 5F , Balloon Diameter- 3Mm, Balloon Length- 100Mm , Pta Catheter With Embolic Capture Feature - 0.014 Compatible, Sheath Compatibility- 5, 6F , Balloon Diameter- 4, 5, 6Mm, Balloon Length-60, 100Mm , Ptv Dilation Catheter For Bpv 0.018 Compatible, Sheath - 3.5F , Balloon Lengths- 2-4Cm , Balloon Diameters -4-12Mm , Asd - Sizing Balloon, Sheath Compatibility-6F - 9F , Balloon Length-1Cm - 6Cm , Balloon Diameters - 10, 12, 15, 20, 25, 30, 35, 40Mm , Balloon Dilation Catheter For Bpv With Guide Wire Compatibility- 0.018, 0.021, 0.025, 0.035, Balloon Diameters - 4, 5, 6, 7, 8, 9, 10, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22, 23, 25Mm, Balloon Length- 1, 1.5, 2, 3, 4, 5, 6, 8, 10Cm , Balloon Dilation Catheter For Bpv, Guide Wire - 0.021, 0.025, 0.035, 4Mm-30Mm Balloon Diameters , Peadiatric Ptv Balloon Dilation Catheter, 2.5F -3.5F , Balloon Diameters- 4, 5, 6, 7, 8, 9, 10Mm, Balloon Lengths - 1, 2, 4Cm , High Pressure Balloons For Valvuloplasty / Rvot Intervention / Other Large Vessel Intervention: High Pressure Balloon Suitable Forresistant Stenosis, Platinum Marker Bands Facilitate Reliable Positioning Of The Ballon, Available In Diameters Ranging From 2.0 To 40.0 , Balloon In Balloon Catheter: Balloon In Balloon Type Of Catheter For Stable Positioning Of Stents In Vasculature, An Inner Balloon 1 / 2 Of The Balloon Diameters Of The Outer Balloons, Inner Balloon That Is 1.0Cm Shorter Than The Outer Balloon, Inner Balloon With A Rated Burst , Balloon Aortic And Pulmonic Valvuloplasty Catheter, 2.5F - 3.5 F , Balloon Diameters- 4, 5, 6, 7, 8, 9, 10Mm, Balloon Lengths - 1, 2, 4Cm , Bmv Kit , , Septal Puncture Needle For Bmv, , Ptmc Balloon, ( Balloon Dia: 19Mm- 30Mm ) , Ptmc Balloon, Balloon Dilatation Range- 24- 30Mm, Catheter Length-70Cm , Sapien Xt Trans Catheter Heart Value With Ascendra Delivery System, Transapical Delivery System ( Tavi ) - 24-26F , Sapien Xt Trans Catheter Heart Value With Ascendra Delivery System , Transfemoral Access ( Tavi ) -16, 18, 20 F , Sapien Xt Trans Catheter Heart Value With Ascendra Delivery System, Transfemoral Access ( Tavi ) - 14, 16F , Core Value Transcather - Aortic Valve Replacement System , 18 F Self Expanding ( Tavi ) , Melody Transcather Pulmonary Valve , 22 F Balloon Expandable ( Tavi ) , Transcather Aortic Valve Replacement System: Navigator Balloondual Stopper System Expandable Valve Material Bovine Pericardium Trileaflet On 2 Lickel Cobalt Alloy Frame Value Hyhrid Hanvecamb Cell Design Delivery System 0.035 Guide Wire Compatible And Catheter , Tavi Device Set , Renal Balloon, , Iabp Pressure Cable And Ecg Cable Set : Iabp Pressure Cable And Ecg Cable Set Suitable For Datascope Machine , Iabp Balloon, Datascope Compatible , Helium Cylinder For Iabp, Datascope Compatible , Ffr Wire, Volcano Compatible , Ffr Connecting Cable, Volcano Compatible , Ffr Wire- 0.014 With Medium Weight Support, Hydrophilic Coating, Flat Core Wire Design, High- Fidelity Sensor Technology , Radio Opaque Tip , Frequency Range- 2.4000 - 2.4835 Ghz ( Ism Band ) , Pressure Range- 30 To + 300 Mm Hg , 25Cm -30Cm Long, Size Femoral Sheath Size Ranging From 6F , With Guide Wire , Balkin Sheath, 5 F - 10 F , Length- 40, 45Cm , Amplatz Wire , Super Stiff, Length- 260 , 300Cm , Tip- Straight / Sharable, 0.035 , Amplatz Wire , Super Stiff, Length- 150Cm, Tip - Straight / Sharable, 0.035 , Amplatz Wire, Extra Stiff , Length- 260, 300Cm, Tip - Straight / Sharable, 0.035 , Amplatz Wire, Extra Stiff , Length- 150Cmcm, Tip- Straight / Shapable, 0.035 , Amplatz Wire, Length- 260, 300Cm, Tip- Straight / Shapable , 0.035 , Amplatz Wire, Length- 150Cm , Tip- Straight / Shapable, 0.035 , Micropuncture Introducer Set Silhouette Transitionless With Stainless Steel Wire Guide Wire , Amplatz Anchor Catheter ( With Locking Malecot ) 8, 10, 12 Fr. , Amplatz Ultrastittguide Wire 0.035 × 180 Cm , Amplatz Ultrastiff Guide Wire 0.035 × 260 Cm , Amplatz Ultrastiff Guide Wire 0.035 × 80 Cm , Angiographic Catheter 4F All Shapes And Lengths , Angiographic Catheter 5 F All Shapes And Lengths , Angiographic Catheter 6 F All Shapes And Lengths , Angioplasty Balloon Catheter Cutting Type Over 0.014 All Diameters And Lengths , Angioplasty Balloon Catheter Drug Coated Over 0.035 All Sizes And Lengths , Angioplasty Balloon Catheter Drug Cutting Type Over 0.018 All Diameter All Lengths , Angioplasty Balloon Catheter Peripheral Over 0.014 All Sizes And Lengths , Angioplasty Balloon Catheter Peripheral Over 0.035 All Sizes And Lengths , Angioplasty Balloon Over 0.018 Guide Wire , Angioplasty Balloon Rapid Exchange 0.014 All Sizes And Lengths , Arterial Puncture Needle 18 G , Arterial Sheath All Sizes And 10 To 30Cm Lengths , Arterial Sheath Long Sheath All Sizes And 40, 60, 70, 80, 90Cm , Arterial Sheath Long Sheath Braided Kink Resistant All Sizes And 40 , 60, 70, 80, 90Cm Lengths , Balloon Catheter Non Compliant Peripheral Over 0.035 Wire, All Sizes , Coil Pusher All Sizes , Covered Stent Graft Balloon Mounted. All Diameter And Len , Cross Over Sheath All Sizes , Cto Wire 0.014 ; All Length , Dilator Coons Type 8 F To 30 F Or More , Dilator Fascial Type 8 F To 30 F Or More , Embolization Coil Push Coil Platinum 0.018 All Sizes , Embolization Coil Push Coil Platinum 0.035 All Sizes , Embolization Coil Push Coil Steel 0.0.035 All Sizes , Embolization Particles Embosphere Like Particles , Embolization Particles - Pva Particles , External Biliary Drainage Catheter 10 F , 20 Cm With And Without Are Straightener , Femoral Compression Band , Femoral Long Sheath; 5 F - 11 F Diameter, Up To 90 Cm Length , Guide Wire 0.014 Shapable, Scitamineum Stainless Steel, Icf Hydrophilic For Ham , Sfa , Btk , Guide Wire 0.018 Shapable, Sctiamineum Stainless Steel , Icf Hydrophilic For Ham, Sfa , Btk , Guide Wire 0.035 Amplatz Extra Stiff 180 Cms , All Sizes , Guide Wire 0.035 Amplatz Extra Stiff 260 Cms All Sizes , Guide Wire 0.035 Amplatz Stiff 260 Cms , 190 Cms All Sizes , Guide Wire 0.035 Amplatz Ultra Stiff 260Cms , 145 Cms, 180 Cms , All Sizes , Ivc Filter , Ivc Filter Femoral Route All Sizes , Ivc Filter Jugular Route All Sizes , Ivc Filter Retrieval Set All Sizes All Routes , Long Sheath All Sizes, Shapes & Length , Micro Catheter 2.4- 3 F , 130- 150Cm , Micro Catheter 2.4 - 3 F , 130Cm With Guide / Glide Wire 0.021 , Micropuncture Set All Sizes , Mullins Sheath All Sizes , Multi Side Hole Catheter All Sizes For Dvt Thrombolysis , Percutaneous Entry Set ( Neff Set ) , Peripheral Stent Graft Self Expandable All Diameter And Length , Peripheral / Biliary Stent : Self Expandable All Diameter And Length , Pigtail Catheter With Locking Loop With Non Metallic And Metallic Straightener 6 F To 14 F , Pta Balloon Catheter Semi - Complaint; 0.35 Compatible; All Diameter And Length , Pta Diagnostic Wire ; Hydrophilic Nitinol Guide Wire 0.035 All , Pva Particles All Sizes , Rotational Thrombectomy System For Dvt All Sizes , Self - Expanding Carotid Stent 0.014 Compatible , Self - Expanding Stent For Peripheral Use; All Diameter And Length , Stent Peripheral Balloon Mounted All Sizes , Stent Peripheral Self Expanding All Sizes , Stent Renal Balloon Mounted All Sizes , Syringe 1 Ml Disposable Luer Lock , Teflon Coated Guide Wire 0.035×150 Cm , Temporary Ivc Filter- Deployment Through Femoral, Jugular And Antecubital Vein , Tips Set All Sizes , Cto Wires ( Boston Type ) All Shape And Size , Diagnostic Angiography Guide Wire 0.032 Straight And J Tip , 150Cm , Femoral Sheath 035, Wire Different Length , Femoral Sheath 20 F , 22 F , 24 F , Inflation Device 30Atm , Ivc Filter Retrievable , Lunderquist Wire 260Cm , Hydrophilic Wire Guide Straight Standard Shaft With Torque 0.035 150Cm , Hydrophilic Wire Guide Straight Standard Shaft With Torque 0.035 260Cm , Slender Sheath Radial Sheath 10Cm Long, Guide Wire 0.025 ( Plastic ) With Unique Thin Wall Structureto Perform Procedure Without Upsizing To A Large Sheath With International Terumo Quality , Doc Extension: Extension Wire Rg3 Tip Load 3G , Slip Coat 170Cm, Length 330Cm , Guide Catheter: 3Rd Curve , Henka Braid , 0.071 Id , Angiography Guide Wire 0.035 , Hydrophilic Coating With Act One , Hydrophilic Wire 0.014 180Cm Long Moderate Support Marker Wire For Ptca - Straight / J Tip - One - Piece Stainless Steel Core Wire Design. Ptfe Spray Coat , Hydrophilic Wire 0.014 195 Cm Long Moderate Support Marker Wire For Ptca Straight / St, J Tip - One - Piece Stainless Steel Core Wire Design.Four Markers Span 30Mm In 10Mm Increments , Hydrophilic Wire 0.014 180 / 300Cm Long Moderate Support Marker Wire For Ptca- Straight / J Tip - One - Piece Stainless Steel Core Wire Design. Supersoft Or Soft Tip , Hydrophilic Wire 0.014 180 / 300Cm Long Moderate Support Marker Wire For Ptca- Straight / St Tip - One - Piece Stainless Steel Core Wire Design. Flattened Distal Coils , Hydrophilic Wire 0.014 195 / 300Cm Long Moderate Support Marker Wire For Ptca-Straight / J Tip - One- Piece Stainless Steel Core Wire Design. Ptfe Spray Coat , Pressure Monitoring Lines, Choice Of Length From 6 To 84 Choice Of Clour - Red, Blue, Yellow & Transparent , Inflation Device: Rated Pressure 30 Bar / 430 Psi Ergonomic Handle , Hemostasis Y : Push - Pull / Rotating / Click Type / Click Type Includes Ext. Line 25 Cms - 4 Way : Large Bore Compatible With Catheters From 4 Fr Upto 9 Fr And Guide Wires From 0.014 To 0.038 Dia Rated Pressure 480 Psi , Invasive Blood Pressure Transducer: Integrated Unit For Clinical Accuracy Dual Mode Of Flushing: Controlled Squeeze & Snap - Tab Completely Transparent For Ease Of Priming And Debugging Available With Flushing Of 3Cc / Hr , 30 Cc / Hr Or Without Flush Easy Zeroing. , C- Fuser Pressure Infuser Bag 500Ml / 1000Ml ( Reusable ) ( Option 1 ) : Secure Fastening. Unique Design Ensures Rapid Set - Up And Fluid Bag Replacement.Accurate And Easy - To - Read Pressure Gage. Crystal Clear Material Allows Maximum Visibility Of Fluid Levels. , Cuff Clear Pressure Infuser Bag 500Ml / 1000Ml ( Reusable ) ( Option ) : The Clear- Cuff Pressure Infuser Bags , Made Of Thick, Durable Polyurethane, Have An Inherent Transparent Quality, Providing Easy Viewing Of The Fluid Bag And The Fluid Level. Additionally, A Special , Pressure Infuser Bag 500Ml / 1000Ml ( Disposable ) ( Option 3 ) : Two Pressure Settings.Available In Multiple Sizes. Loads Quickly And Easily. Non - Sterile . Stopcock Placed Close To Bulb For Easy Inflation, Closure Once Fully Pressurized, And Deflation.Easy And Stable , Ivuscatheter, Volcano Compatible , Ivus Catheter: Intra Vascular Ultrasound Imaging Catheter With Transducer Frequency Of 30 And 40 Mhz , Maximum Diameter Penetration Of 6Mm And 12Mm, 5 Fr And 6 Fr Compatible, 0.014 And 0.018 Inch Guide Wire Compatible, Length 135 Cm With Hydrophilic Coating And Radio Opaque Distal Tip Marker , Dragonfly Optis Intravascular Imaging , 2Mm- 3.5 Mm Imaging Diameter , Dragon Fly Optis / Duo Oct Imaging Catheter: Compatible With Ilumein Optis , Provide Continuous Calibration Throughout Pullback, Pull Back Lengh - 54 ( High Resolution ) 75 ( Survey ) Mm , Imaging Up 180 Frames Per Sec , 3 Radio Opaque Markeres At The Distal Tip, Imaging Lens 50Mm Proximal , 2.7 F Crossing Profile, Compatible With 0.014 & 6 F Guide Catheter , 3 D Oct Catheter, , Rotablation Set, , Rotablation Burr , Rota Wire , , Pulmonary Embolectomy Catheter, , Dual Lumen Catheter, , Embolization Coil For Iliac Artery , Detachable Coil System, , Coil Detacher / Bioptome Cable, , Cable Set For Pacemaker Leads , Crt - P , Crt - P Bipolar , Crt - P Bipolar , 6 Pacing Vectors , Crt - P Bipolar , Mri Auto Detect , Crt - P Quadripolar , Crt - P Quadripolar , 13 Pacing Vectors , Crt - D With Accessories , Crt - D With Accessories ( Bipolar ) , Crt - D With Accessories ( Quadripolar ) , Crt - D Pg Only , Crt - D Pg Only ( Quadripolar ) , Crt - D Pg Only ( Bipolar ) , Permanent Pacemaker- Vvi- Tinted Lead & Screw In Lead With Pulse Generator Volume 10Cc, Weight 20.8 Gram With Life Time Warranty ( Non Mri Compatible ) , Permanent Pacemaker- Vvi - Tined Lead & Screw In Lead With Pulse Generator Volume 10Cc, Weight 20.8 Gram With Life Time Warrenty ( Mri Compatible ) , Permanent Pacemaker- Vvi - Tined Lead & Screw In Lead With Pulse Generator Weight 21.5Gram ( Non Mri Compatible ) , Permanent Pacemaker- Vvi - Tined Lead & Screw In Lead With Pulse Generator Weight 21.5 Gram ( Mri Compatible ) , Permanent Pacemaker- Vvi - Tined Lead & Screw In Lead With Pulse Generator With Volume 9.7Cc, Weight 19 Gram And Allows Full Body Mri Scans , Permanent Pacemaker- Vvi- Tined Lead &Screw In Lead ( Non Mri Compatible ) , Permanent Pacemaker- Vvi - Tined Lead & Screw In Lead ( Mri Compatible ) , Pacemaker- Vvir - Tined Lead & Screw In Lead ( Mri Compatible ) , Pacemaker - Vvir - Tined Lead & Screw In Lead ( Non Mri Compatible ) , Pacemaker Vvir Tined Lead & Screw In Lead Mass ( G ) : 23.6, Volume ( Cc ) : 13.2 , Pacemaker ( Vdd ) - Tined Lead & Screw In Lead ( Mri Compatible ) , Pacemaker ( Vdd ) - Tined Lead & Screw In Lead ( Non Mri Compatible ) , Pacemaker Vdd R - Tined Lead & Screw In Lead ( Mri Compatible ) , Pacemaker Vdd R - Tined Lead & Screw In Lead ( Non Mri Compatible ) , Permanent Pacemaker- Ddd - Tined Lead & Screw In Leadwith Pulse Generator 11Cc Weight 23 - 24 Gram, With Life Time Warranty , Permanent Pacemaker- Ddd - Tined Lead & Screw In Lead, With Multiprogrammability , Mri Compatible Pacemaker , Permanent Pacemaker- Ddd - Tined Lead & Screw In Lead, With Volume 10.4Cc , Weight 19 Gram, Mri Compatible Pacemaker , Permanent Pacemaker- Ddd - Tined Lead & Screw In Lead , Pacemaker - Dddr - Tined Lead & Screw In Lead , Pacemaker- Dddr - Tined Lead & Screw In Lead Mass ( G ) : 29.1, Volume ( Cc ) :15.8 , Mri Compatible Pacemaker- Single Chamber Rate Responsive , Mri Compatible Pacemaker- Dddr , Mri Compatible Pacemaker Dddr With Rate Drop Response, Af Suppression Algorithm , Icd -Single Chamber 3 Tesla , Rf Telemetry & Morph Match With Life Time Warranty , Icd - Single Chamber 3 Tesla, Rf Telemetry & Morph Match , Icd - Single Chamber , Icd - Single Chamber ( Mri Compatible ) , Icd - Dual Chamber , Icd - Dual Chamber ( Mri Compatible ) , Pacemakers , Dual Chamber ( Non Mri ) Dddr Limited Warranty. Dual Sensors, Pacesafe Ra Rv ( Provide Dynamic Adjustment Of Pacing Output To Ensure Capture ) , , Pacemakers , Dual Chamber ( Non Mri ) Life Time Warranty.Dual Sensors, Rf Telemetry, Pacesafe Ra Rv ( Provide Dynamic Adjustment Of Pacing Output To Ensure Capture ) , , Pacemakers , Single Chamber ( Mri ) Vvir Life Time Warranty. 1.5 & 3 T Mri , No Time Or Zone Restrictions, Auto Mri Mode Change, Rf Telemetry, , Pacemakers , Dual Chamber ( Mri ) Dddr Lifetime Warranty Image Ready -- Mr Conditional Pacing System At 3 T And 1.5T , Full Body With No Time Imitations , With Automatic Mri Timeout , Pacemakers , Single Chamber Vvir ( Non Mri ) Limited Warranty.Pacesafe Rv ( Provide Dynamic Adjustment Of Pacing Output To Ensure Capture ) , , Pacemakers Single Chamber Vvir ( Non Mri ) Lifetime Warranty. Rf Telemetry, Pacesafe Rv ( Provide Dynamic Adjustment Of Pacing Output To Ensure Capture ) , , Dddr Mri Limited Warranty: 1.5 & 3 T Mri , No Time Or Zone Restrictions, Auto Mri Mode Change, Rf Telemetry, Pacesafe Ra Rv ( Provide Dynamic Adjustment Of Pacing Output To Ensure Capture ) , , Pacemakers , Single Chamber Pg Only, Lifetime Warranty , Pacemakers , Dual Chamber Pgonly , Limited Warranty , Pacemakers , Single Chamber Pg Only, Lifetime Warranty , Pacemakers, Dual Chamber Pg Only, Lifetime Warranty , Single Chamber Pacemake Vvir Mri Compatible.Limited Warranty, 16 Yrs Longevity.Weight 20.8Gms, Diamensions 48 40Mm 6.5Mm , Dual Chamber Pacemaker Dddr Mri Compatible. Weight 23.2 Gm. Dimension 48Mm * 44Mm* 6.5Mm. Small Size. Limited Warranty And 13Yrs Longevity , Dual Chamber Pacemaker Ddd Mri Compatible. Minimum Of 8 Yrs Warranty, 13 Yrs Longevity. Weight 23.2 Gm , Diamensioons 48Mm* 44Mm* 6.5Mm. , Single Chamber Pacemaker Ddd Mri Compatible.Lifetime Warranty, 16 Yrs Longevity.Weight 20.8Gms, Dimensions 48 *40Mm * 6.5Mm , Dual Chamber Pacemaker Dddr Mri Compatible. Weight 23.2Gm. Dimensions 48Mm*44Mm* 6.5Mm. Small Size.Lifetime Warranty And 13 Yrs Longevity. , Icd Single Chamber Singlesicde Extended Life ( El ) Labeled Icd With Li / Mno2 Battery With Industry Best Capacity Of 2Ah. 10 Year Warranty Mri Compatible.Rate Adaptive Pacing With Blended Sensors Accelerometer With Minute Ventilation.Worlds Thinnest Icd . Atp In All , Icd De Dual Chamber Dualextended Life ( El ) Labeled Icd With Li / Mno2 Battery With Industry Best Capacity Of 2Ah.10-Years Warranty Mri Compatible.Rate Adaptive Pacing With Blended Sensors Of Accelerometer With Minute Ventilation.World Thinnest Icd.Atp In All , Icd Single Chamber Extended Life ( El ) Labelled Icd With Li / Mno2 Battery With The Industry Best Capacity Of 2Ah.8-Years Warranty.Mri Compatible Rate Adaptive Pacing With Blended Sensors Of Accelerometers With Minute Ventilation , Icd Single Chamber Extended Life ( El ) Labelled Icd With Li / Mno2 Battery With The Industry Best Capacity Of 2Ah.8-Years Warranty.Mri Compatible Rate Adaptive Pacing With Blended Sensors Of Accelerometers With Minute Ventilation.Worlds Thinnest Icd.Atp In All , Crtp:Quadripolar Crtp.Mri Compatible 17 Pacing Vectors Apnea Scan.Rate Adaptive Pacing- Blended Sensors Of Accelerometer With Minute Ventilation , Crtp:Bipolar Crtp.Apnea Scan Rate Adaptive Pacing-Blended Sensors Of Accelerometer With Minute Ventilation , Crtds ( Quardripolar ) Extend Life ( El ) Labelled Icd With Li / Mno2 Battery With Industry Best Capacity Of 2Ah.6 Years Warranty 17 Vectors. Mri Compatible Rate Adaptive Pacing With Blended Sensors Of Accelerometer With Minute Ventilation Atp In All , Crtds ( Quardripolar ) Extend Life ( El ) Labelled Icd With Li / Mno2 Battery With Industry Best Capacity Of 2Ah.6 Years Warranty 17 Vectors. Mri Compatible Rate Adaptive Pacing With Blended Sensors Of Accelerometer With Minute Ventilation Atp In All , Mri Compatible Single Chamber Limited Warranty Vvi Pacemaker , Mr A Compatible Single Chamber Limited Warranty Vvir Rate Response Pacemaker , Mri Compatible Dual Chamber Limited Warranty Ddd Pacemaker , Mri Compatible Dual Chamber Limited Warranty Rate Response Dddr Pacemaker , Mri Compatible Single Chamber Lifetime Warranty Rate Response Vvir Pacemaker , Mri Compatible Dual Chamber Life Time Warranty Rate Response Dddr Pacemaker , 3T Mri Compatible Dual Chamber Lifetime Warranty Rate Response Dddr Pacemaker , Single Chamber Mri Compatible Icd. Rf Telemetry, 40J Delivery Energy, Svt Discriminators, Sensibility, Low Frequency Attenuation Filter, Secure Sense Lead Noise , Dual Chamber Mri Compatible Icd.Rf Telemetry , Single Chamber Mri Compatible Icd Rf Telemetry , Dual Chamber Mri Compatible Icd. Rf Telemetry , Mri Compatible Qudripolar Crt-P Device. 14 Pacing Vectors Syncav Technology, Auto Vectselect, Corvue Congestion Monitoring At / Af Alerts, Af Suppression, 14 Min Egm , Mri Compatible Qudripolar Multipoint Pacing Crt-P Device , Mri Compatible Multipoint Pacing Crt-D Device10 Pacing Vectors Auto Vectselect, Parylene Coating, Dynamic Tx Over Current Detection, Shock Guard Technology, Far Field Md , 3T Mri Compatible Single Chamber Icd , 3T Mri Compatible Dual Chamber Icd , 3T Mri Compatible Crt-D Deevice , 3T Mri Compatible Single Chamber Icd Device , 3T Mri Compatible Dual Chamber Icd , 3T Mri Compatible Crt-D Devicesyncav + Advanced Technology , Rf Enable Non Mri Bipolar Crt-P Deviceauto Capture, Auto Sense At / Af Alerts Suppression, 14 Min Egm Storage Ce / Fda / Dcgi , Mri Compatible Crt-D Device , Non Mri Compatible Crt-D Device , Subcutaneous Icd-Size-83.1 X 69.1 X 12.7 Mm, Weight-130 G, Volume-59.5 Cc, Longivity- Minimum Of 7 Years , Leadless Pacemaker- Screw In Type , Leadless Pacemaker- Tined Type , Quardripolar Fixed Catheter-For Electrophysiology Intervention , Cables For Quadripolar Fixed Catheter-For Electrophysiology Interventions , Quadripolarsteerable Catheter-For Electrophysiology Interventions , Bi Quadripolar Steerable-For Electrophysiological Intervention , Decapolar Fixed Catheter-For Electrophysiology Interventions , Decapolar Cables-Forelectrophysiology Interventions , Hexapolar Unipolar Recording Catheter-For Electrophysiology Interventions , Hexapolar Unipolar Recording Cable-For Electrophysiology Interventions , Decapolar Steerable Catheter-For Electrophysiology Interventions , Ibi-Decapolar-Steerable Catheter-For Electrophysiology Interventions , Ibi-Decapolar Cable-For Electrophysiology Interventions , Ibi-Decapolar-Steerable With Lumen-For Electrophysiology Interventions , Ibi-Decapolar-Paediatric-For Electrophysiology Interventions , Duodecapolar Catheter-Speciality-For Electropsysiology Interventions , Therapy Ablation Catheter-Paediatric-For Electrophysiology Interventions , Therapy Ablation Catheter-4Mm-For Electrophysiology Interventions , Therapy Ablation Catheter-8Mm-For Electrophysiology Interventions , Thermocouple Ablation Catheter 4Mm-For Electrophysiology Interventions , Thermocouple Ablation Catheter 8Mm-For Electrophysiology Interventions , Bidirectional Ablation Catheter 4Mm-For Electrophysiological Invention , Bidirectional Ablation Catheter 8Mm-For Electrophysiological Invention , Coolpathcatheter-4Mm-For Electro Physiological Intervention , Coolflex-For Electrophysiology Interventions , Bluebidirectional Irrigated Catheter-For Electrophysiology Intervention , Ablation Cable To Ibi Generator-For Electrophysiology Interventions , Ablation Cable To Stockert / Ept Generator For Electrophysiology Interventions , Coolpoint-Tubing Set-For Electrophysiology Interventions , Haemostasis Introducedr-For Electrophysiological Invention , Haemostasis Introducedr-2 Port-For Electrophysiological Interventions , Haemostasis Introducer-3 Port -For Electrophysiology Intervention , Transseptal Guiding Introducers For Ep-For Electrophysiological Interventions , Braided Transseptal Guiding Introducers For Ep-For Electrophysiological Interventions , Speciality Sheath For Transseptal -For Guiding Introducer For Electrophysiology Interventions , Steerable Introducer For Ep-For Electrophysiology Interventions , Mullins Sheath With Tipmarker-For Electrophysiological Interventions , Surface Electrode Path For Electrophysiology Interventions , Mapping Catheter For Electrophysiology Interventions , Bidirectional Spiral Catheter-For Electrophysiological Interventions , Double Loop Spiral Catheter-For Electrophysiological Interventions , Laryngoscope Blade:Laryngoscopes Blade Size Ranging From 1 To 4 , Cord For Bipolar Cautery Forceps , Cord For Unipolar Cautery Forceps , Electropad For Cautery , 5F , 6F Flow Directed Temporary Pacing Lead With Balloon, 8 Mm Balloon, Length 110Cm , 5 F, 6 F Flow Directed Temporary Pacing Lead With Balloon, 8 Mm Balloon, Length 110 Cm , 5 F Ordinary Temporary Pacing Lead, Length-105Cm, 110Cm, Electrode Spacing-15Mm, 25Mm , 5F, 6F, 7F, Temporary Pacing Lead, 100, 125Cm, Bipolar , Torque Device , Ecg Paper , Ecg Paper, Ge Compatible, 80 Mm, Red Grid , Ecg Paper, Cardiograph 1200 Compatible, Thermal Paper Size:216Mm Length:20M , Eto Paper For Sterilization ( Eto Reel ) Size:5Cmx200m, 7.5Cmx200m, :10Cmx200m, ;: 15Cmx200m;:20Cmx200m, 25Cmx200m, :30 Cmx200m, 35Cmx200 M, 40 Cmx200m , ( Tmt Paper ( Thermal Papper ) For Ge Tread Mill Machine A4 Size, Z Fold Type , Radiolucent Ecg Electrodes Electrodes That Are Radio Lucent So As Not To Interfere With Imaging In The Cath Lab; 3 M Quality Which Show Minimum Artefacats In Ecg Display During Cath Procedures And Tread Mill Testing , Defibrillator Recording Plain Thermal Paper, Width 50 Mm , Trop T Trop I Test Strip, 25 Strips Pack. Alere Machine Compatible , Trop T Trop I Test Strip, For Qc. Alere Machine Compatible , Ecg Electrodes 3M Compatible With Least Noise And Artefacts In Treadmill, Radiolucent , Presure Injector Syringe 150 Ml, Medrad Arterion Merk 7 Compatible , Des Sirolimus, Cobalt Chromium L 605 Alloy, Biodergradable Polymer, Ce Approved, Varying Strut Width 85, 70 &50 Microns, Size , 3 Port Manifold, Right Port, Halfbody, With On / Off Handle , Negative Pressure Syringe With Male Leur Lock, 10Ml, 20Ml, 50Ml , Pressure Connector, 100-200Cm , Pressure Connector For Pressure Injector , Elastic Adhesive Bandage 10Cm Width*Stretched Length 4 / 6M , Angiogram Kit;Gowns-4 Nos, Trolly Sheet - 5Nos, Long Hole Sheet ( 250Cmx160cm ) -5, Nos, Hand Towel-5Nos, , Angiogram Kit ;Gowns-2Nos, Trolly Sheet - 1Nos ( 150*200Cm ) , Long Hole Sheet ( 250Cmx160cm ) -1, Nos, Hand Towel-2Nos, C-Arm Protection Cover-1Nos, Mopping Pad - 1 Nos , Angiogram Kit ;Gowns-3Nos, Trolly Sheet - 2Nos ( 150*200 Cm ) , Long Hole Sheet ( 250Cmx160cm ) -2, Nos, Hand Towel-3Nos, C-Arm Protection Cover-Inos, Mopping Pad -1 Nos , Angiogram Kit ;Gowns-4Nos, Trolly Sheet - 2Nos ( 150*200 Cm ) , Long Hole Sheet ( 250Cmx160cm ) -2, Nos, Hand Towel-4Nos, C-Arm Protection Cover-Inos, Mopping Pad -1 Nos , Angioplasty Kit : 3 Layered Absorbent Pp Spun Bond Nonwoven Fabric ( 5 Long Hole Sheet -250Cmx160cm, Doc Gown-3, Trolly Sheet-5, Per Kit ) . Transparent Cover For Radiation Protection Shield-1 , Patient Gown: Front Open , I V Cannula: No 18 G Sterile , I V Cannula: No 16 G Sterile , Iv Cannula: No 20 G Sterile , Suture Materials-Silk-1.0 , Suture Materials-Vicryil-2.0 , Suture Materials-Monocril-3.0 , Suture Materials-Nylon-0 , Iv Needles: No 16 G Sterile , Iv Needles: No 18 G Sterile , Iv Needles: No 20 G Sterile , Butterfly Needles / Scalp Vein Set, All Sizes , Oxygen Mask , Nebulizer Mask , Syringe:2 Ml, Sterile , Syringes:5 Ml, Sterile , Syringes:10 Ml, Sterile , Syringes:50 Ml, Sterile , Syringes:20 Ml, Sterile , Dynaplaster ( 10 X 416Cm ) : , Iv Drip Set ( Macro ) Sterile, Non Vented , Iv Drip Set ( Macro ) Sterile, Vented , Surgical Blades:No. 11 , Sterile Plastic Sheet , Button Switch Pencil For Electrocautery, Disposable Blade Electrode, Core Length-3Mtrs , Contrast Switch Pencil For Electrcautery, Disposable Blade Electrode, Core Length-3Mtrs , Contrast Media Non Ionic ( Iso Osmolar ) - Lohexol, 100Ml ( 300 / 350Mg Lodine / Ml ) , Contrast Media- Lopromide, 100Ml ( 300 / 350Mg Loding / Ml ) , Contrast Media- Iomeprol, 100Ml ( 300 / 350Mg Lodine / Ml ) , Contrast Media-Lopamidol, 100Ml ( 300 / 350Mg Lodine / Ml ) , Contrast Media-Loversol, 100Ml ( 300 / 350Mg Lodine / Ml ) , Contrast Media ( Dimer ) - Lodixanol, 100Ml ( 300 / 350Mg Lodine / Ml ) , Contrast Media Non Ionic ( Iso Osmolar ) ( Dimer ) - Lodixanol, 100Ml ( 300 / 350Mg Lodine / Ml ) , Contrast Media ( Dimer ) - Loxaglate, 100Ml ( 300 / 350Mg Lodine / Ml ) , Contrast Media- Lohexol , 50-90Ml ( 300 / 350Mg Lodine / Ml ) , Contrast Media- Lopromide, 50-90Ml ( 300 / 350Mg Lodine / Ml ) , Contrast Media-Lomeprol, 50-90Ml ( 300 / 350Mg Lodine / Ml ) , Contrast Media- Lopamidol, 50-90Ml ( 300 / 350Mg Lodine / Ml ) , Contrast Media-Loversol, 50-90Ml ( 300 / 350Mg Lodine / Ml ) , Contrast Media ( Dimer ) - Lodixanol, 50-90Ml ( 300 / 350Mg Lodine / Ml ) , Contrast Media ( Dimer ) -Loxaglate, 50-90Ml ( 300 / 350Mg Lodine / Ml ) , Tenectaplase:Thrombolytic Agent, Vial Of 50 Mg , Polidocanol Injection 3%, 2 X, 2 Ml , Tirofiban 5Mg / 100Ml ( 50Mcg / Ml ) , Cables-For Electrophysiology Interventions , Optima Cables-For Electrophysiology Interventions / , Ecg Cable-For Electrophysiology , Grounding Pad-For Electrophysiology Interventions , Light Weight Radiation Protection Aprons ( With Lead Equivalence 0.5Mm Pb ) , Tungsten, Bismuth & Antimony Shield With Lead , Lead Visor For Head Protection, , Headcap , Leadless Aprons , Gonad Shield / Ovary Shield ( Lead Equivalence - 1Mm Pb ) , Thyroid Collar ( Lead Equivalence 0.5 Mm Pb ) , Radiation Protection Gloves ( Lead Equivalence 0.25 Mm Pb / 0.35 Mm Pb / 0.5 Mm Pb , Table Front Panel Radiation Protection Shield, 22X24, Nylon Fabric, Weight Starting From - 7.5Lbs, Curtain Type , Pressure Bag Meter Gauge ( Reusable ) , Pressure Bag Meter Gauge , Pressure Dome For Pressure Transducer , Pressure Transducer Cable , Betadine Solution-7.5% Povidone Iodine Skin Antiseptic Lotion, With Dispenser , Surgical Scrub- Antimicrobial Surgical Scrub With 4% Chlorhexidine Gluconate With Dispenser , Antimicrobial Incise Drapes Impregnated With Lodine Povacrylex ( 0.7% Available Iodine ) : 35Cmx35cm , Act Tube, For Actalyke Mini Act Machine , Ultra Sound Scanning Gel -5 Kg Pack , Ultra Sound Scanning Gel , Electrode Contact Gel , Cidex Tray: Length Ranging From 125 To 150Cm, Breadth Ranging From 20 To 30Cm, Depth Ranging From 15 To 25Cm, Stainless Steel , Chitosan Based Adsorbant Haemostat, Various Sizes , Sterile Radiation Protection Drapes For Angiogram , High Pressure Inflation Device For Special Cto Casses .. Rbp At 55 Atm, Manometer Resolution 5 Atm , Twin Layer Balloon Construction With Virtually Zero Dog - Boning Effect, Super High Pressure Ptca Balloon ( Rbp 35Atm ) , Better Crossing Profile ( 0.028’’ 2.0Mm ) Than Scoring- And Cutting Balloons , Two Platinum Markers For All Sizes: Available From Diameter: 1.5 Mm And Length :10 / 15 / 20 Mm, Linear Compliance Curve Up To Over 40Atm For Plaque Modification In Moderate To Severely Calcified Lesions , Twin Layer Balloon Construction With Virtually Zero Dog - Boning Effect, Super High Pressure Ptca Balloon ( Rbp 35Atm ) , Better Crossing Profile ( 0.028’’ 2.0Mm ) Than Scoring- And Cutting Balloons , Two Platinum Markers For All Sizes: Available Fromdiameter: 2.0Mm And Length :10 / 15 / 20 Mm, , Linear Compliance Curve Up To Over 40Atm For Plaque Modification In Moderate To Severely Calcified Lesions , Twin Layer Balloon Construction With Virtually Zero Dog - Boning Effect, Super High Pressure Ptca Balloon ( Rbp 35Atm ) , Better Crossing Profile ( 0.028’’ 2.0Mm ) Than Scoring- And Cutting Balloons , Two Platinum Markers For All Sizes: Available Fromdiameter: 2.5 Mm And Length :10 / 15 / 20 Mm, , Linear Compliance Curve Up To Over 40Atm For Plaque Modification In Moderate To Severely Calcified Lesions , Twin Layer Balloon Construction With Virtually Zero Dog - Boning Effect, Super High Pressure Ptca Balloon ( Rbp 35Atm ) , Better Crossing Profile ( 0.028’’ 2.0Mm ) Than Scoring- And Cutting Balloons , Two Platinum Markers For All Sizes: Available Fromdiameter: 3.0Mm And Length :10 / 15 / 20 Mm, , Linear Compliance Curve Up To Over 40Atm For Plaque Modification In Moderate To Severely Calcified Lesions , Twin Layer Balloon Construction With Virtually Zero Dog - Boning Effect, Super High Pressure Ptca Balloon ( Rbp 35Atm ) , Better Crossing Profile ( 0.028’’ 2.0Mm ) Than Scoring- And Cutting Balloons , Two Platinum Markers For All Sizes: Available Fromdiameter: 3.5Mm And Length :10 / 15 / 20 Mm, , Linear Compliance Curve Up To Over 40Atm For Plaque Modification In Moderate To Severely Calcified Lesions , Twin Layer Balloon Construction With Virtually Zero Dog - Boning Effect, Super High Pressure Ptca Balloon ( Rbp 35Atm ) , Better Crossing Profile ( 0.028’’ 2.0Mm ) Than Scoring- And Cutting Balloons , Two Platinum Markers For All Sizes: Available Fromdiameter: 4.0 Mm And Length :10 / 15 / 20 Mm, , Linear Compliance Curve Up To Over 40Atm For Plaque Modification In Moderate To Severely Calcified Lesions , Twin Layer Balloon Construction With Virtually Zero Dog - Boning Effect, Super High Pressure Ptca Balloon ( Rbp 35Atm ) , Better Crossing Profile ( 0.028’’ 2.0Mm ) Than Scoring- And Cutting Balloons , Two Platinum Markers For All Sizes: Available Fromdiameter: 4.5 Mm And Length :10 / 15 / 20 Mm, , Linear Compliance Curve Up To Over 40Atm For Plaque Modification In Moderate To Severely Calcified Lesions , High Pressure Nc Baloon For Cto With Small Crossing Profile 0.0195. The Baloon Of Choice Prior To The Use Of A Rotablator , Balloon Size 0.85Mm Diametr And Length 6 / 10 / 15Mm, Rbp Of 23 Atm , Us Fda / Ce Approved-Guide Extension Catheter With Stainless Steel Collar Embedded In Polymer Is Designed To Optimize Accessory Device Delivery, Need Two Radiopaque Marker Bands Facilitate Accurate Placement And Positioning, Also With Softflexible, And Atraumatic Tip Designed To Minimize The Risk Of Complications To The Vessel And 120 Cm Proximal Hypotube Shaft , 0.057 ( 1.45 Mm ) Innerdiameter, Stainless Steel Collar Embedded In Polymer, Proximal Marker Band, 1X1 Braid, Hydrophilic Coating, Distal Marker Band, Atraumatic Tip , Us Fda / Ce Approved-Guide Extension Catheter With Platinum Iridium Helical Collar , Optimal Visibility And Smooth Device Interaction Embedded In Polymer Is Designed To Optimize Accessory Device Delivery, Need Two Radiopaque Marker Bands Facilitate Accurate Placement And Positioning, Also With Softflexible, And Atraumatic Tip Designed To Minimize The Risk Of Complications To The Vessel And 120 Cm Proximal Hypotube Shaft , 0.057 ( 1.45 Mm ) Innerdiameter, Proximal Marker Band, 1X1 Braid, Hydrophilic Coating, Distal Marker Band, Atraumatic Tip , Us Fda / Ce / Jpan Pmda Approved-Radial Sheath With Nitinolguide Wire And Hydrophilic Mucouscoating– Sheath Size Ranging From 4F Length Ranging From7cm - Wire Length 45Cm, Wire Dimension0.025, Cross-Cut Haemostasis Valve Effectively Avoids Blood Reflux And Air Aspiration , Us Fda / Ce / Jpan Pmda Approved-Radial Sheath With Nitinolguide Wire And Hydrophilic Mucouscoating– Sheath Size Ranging From 5F Length Ranging From7cm - Wire Length 45Cm, Wire Dimension0.025, Cross-Cut Haemostasis Valve Effectively Avoids Blood Reflux And Air Aspiration , Us Fda / Ce / Jpan Pmda Approved-Radial Sheath With Nitinolguide Wire And Hydrophilic Mucouscoating– Sheath Size Ranging From 6F Length Ranging From7cm - Wire Length 45Cm, Wire Dimension0.025, Cross-Cut Haemostasis Valve Effectively Avoids Blood Reflux And Air Aspiration , Us Fda / Ce / Jpan Pmda Approved-Radial Sheath With Nitinolguide Wire And Hydrophilic Mucouscoating– Sheath Size Ranging From 7F Length Ranging From7cm - Wire Length 45Cm, Wire Dimension0.025, Cross-Cut Haemostasis Valve Effectively Avoids Blood Reflux And Air Aspiration , Us Fda / Ce / Jpan Pmda Approved-Tiger Curve Diagnostic Catheter With High Torque Design And With M Coat Technology, Precise Manipulation With Ultra Thin Wall Technology That Creates Large Lumen To Enable Short Injection Time With Pressure Limit Of 750Psi For 4F And 1000 Psi For 5F And 6F Diagnostic Catheters And A Wire Compatibility Of 0.038. , Us Fda / Ce / Jpan Pmda Approved-Total Integrated Fit Tip Tapering That Comes With Cross Cut Haemostasis Valve To Avoid Blood Reflux And Air Aspiration.Thin Radiopaque Sheath With Anti-Kinking Sleeve. Comes With Hydrophilic M Coating Technology And Comes In 4F , Us Fda / Ce / Jpan Pmda Approved-Total Integrated Fit Tip Tapering That Comes With Cross Cut Haemostasis Valve To Avoid Blood Reflux And Air Aspiration.Thin Radiopaque Sheath With Anti-Kinking Sleeve. Comes With Hydrophilic M Coating Technology And Comes In5f , Us Fda / Ce / Jpan Pmda Approved-Total Integrated Fit Tip Tapering That Comes With Cross Cut Haemostasis Valve To Avoid Blood Reflux And Air Aspiration.Thin Radiopaque Sheath With Anti-Kinking Sleeve. Comes With Hydrophilic M Coating Technology And Comes In6f , Us Fda / Ce / Jpan Pmda Approved-Total Integrated Fit Tip Tapering That Comes With Cross Cut Haemostasis Valve To Avoid Blood Reflux And Air Aspiration.Thin Radiopaque Sheath With Anti-Kinking Sleeve. Comes With Hydrophilic M Coating Technology And Comes In 7F , Us Fda / Ce / Jpan Pmda Approved-Vascular Closure Device With 3 Bioabsorbable Components- Anchor, Collagen And Sutures. , Us Fda / Ce / Jpan Pmda Approved-Guide Wire M Stiff Type Is A Nitinol Hydrophilic Guide Wire Covered With Polyurethane Containing Tungsten And A Hydrophilic Polymer Coating ( Patented M Coating ) With Good Shape Memory And High Stiffness And Resistance And Comes In 150 Cms Length , Us Fda / Ce / Jpan Pmda Approved-Guide Wire M Stiff Type Is A Nitinol Hydrophilic Guide Wire Covered With Polyurethane Containing Tungsten And A Hydrophilic Polymer Coating ( Patented M Coating ) With Good Shape Memory And High Stiffness And Resistance And Comes In 260 Cms Length. , Us Fda / Ce / Jpan Pmda Approved-Guide Wire M Standard Type Is A Nitinol Hydrophilic Guide Wire Covered With Polyurethane Containing Tungsten And A Hydrophilic Polymer Coating ( Patented M Coating ) With Good Shape Memory And Resistance, For Vessel Crossing, Lesion Access And Device Support. Comes In Straight / Angled Distal Tip And Comes In 150 Cms Length , Us Fda / Ce / Jpan Pmda Approved-Guide Wire M Standard Type Is A Nitinol Hydrophilic Guide Wire Covered With Polyurethane Containing Tungsten And A Hydrophilic Polymer Coating ( Patented M Coating ) With Good Shape Memory And Resistance, For Vessel Crossing, Lesion Access And Device Support. Comes In Straight / Angled Distal Tip And Comes In 260 Cms Length , Us Fda / Ce / Jpan Pmda Approved-Glide Slender Sheath Designed With A Thin Wall Technology And Tapered Design Where The Outside Diameter Is Reduced By One French Size While The Inner Diameter Equivalent Is Maintained. Slender Sheath Is Coated With Glide Technology M Coat, And Comes In 5F , Us Fda / Ce / Jpan Pmda Approved-Glide Slender Sheath Designed With A Thin Wall Technology And Tapered Design Where The Outside Diameter Is Reduced By One French Size While The Inner Diameter Equivalent Is Maintained. Slender Sheath Is Coated With Glide Technology M Coat, And Comes In 6F , Us Fda / Ce / Jpan Pmda Approved-Glide Slender Sheath Designed With A Thin Wall Technology And Tapered Design Where The Outside Diameter Is Reduced By One French Size While The Inner Diameter Equivalent Is Maintained. Slender Sheath Is Coated With Glide Technology M Coat, And Comes In 7F , Us Fda / Ce / Jpan Pmda Approved-Ikari Curve Right Guiding Catheter For Ptca, 6F-8F / 47 -110Cm , Us Fda / Ce / Jpan Pmda Approved-Ikari Curve Left Guiding Catheter For Ptca, 6F-8F / 47 -110Cm , Us Fda / Ce / Jpan Pmda Approved-Tiger Curve Guiding Catheter ; Size 5F-6F / 100Cm, Soft Catheter With Torque Control, Internationally Accepted In 3.5 And 4.0 Curves. , 180 Cm Length, 1.0 Tip Load Cto Wire For Ptca ( Tip Shape Straight ) , Durable Patented Hydrphilicm Coating, With Innovative Duo Core For A Great Torque Response Hybrid Wire That Fuses Nitinol & Stainless Steel, 180Cm And 300 Cm , Us Fda / Ce / Jpan Pmda Approved-180 Cm Length, 0.6 Tip Load Cto Wire For Ptca ( Tip Shape Straight ) , Durable Patented Hydrphilicm Coating, With Innovative Duo Core For A Great Torque Response, Hybrid Wire That Fuses Nitinol & Stainless Steel, 180Cm And 300 Cm , 180 Cm Length, 3.6 Tip Load Cto Wire For Ptca ( Tip Shape Straight ) , Durablepatented Hydrphilicm Coating, With Innovative Duo Core For A Great Torque Response Hybrid Wire That Fuses Nitinol & Stainless Steel, 180Cm And 300 Cm , Us Fda / Ce / Jpan Pmda Approved- Ultra Low Profile Cto Balloon With 0.016 Tip Entry Profile, Flexible Tip, With Hydrophilic Coating ( M Coat ) With Core Wire Structure ( Tm Technology ) , Rewrapple Structure With Three Pleats, Instead Of Conventional Spiral-Cut Structure Thin Proximal Shaft Of 1.9 F Nominal Of 6 Atm And Rbp Of 14 Atm.Size 1.00 Mm Diameter To4.00 Mm Diameter. , ( Fda / Ce Approved ) Non-Compliant Hydrophilic Coated Balloon With Flexible Thin Markers, Tri Layer Balloons With Soft Inner And Outer Elastomer Layers That For Resistance From High Pressures And Stronger Polyamide Layer In The Middle For Additional And Safer High Pressure Resistance., And With M Coat Technology, Shaft Diameter Of 1.9F Proximal And 2.5F In The Mid Segment, And With Two Depth Markers 145 Cm Length With Nominal Pressure Of 12 Atm And Rbp 22 Atm , Lesion Entry Profile 0.017 , Us Fda / Ce / Jpan Pmda Approved-130 & 150 Cm, Stainless Steel Braide, Hydrophilic Coating, Tapered Inner Shaft With Floppy Distant 13 Cm, Proximal With 0.7 Mm Gold Marker At 0.7Mm From The Tip, Ptfe Inner Layer To Handle Smooth Guide Wire Handling With Less Resistance. , Us Fda / Ce / Jpan Pmda Approved-Des, Sirolimus 3.9Nano Gram / Stent Length, Cobalt Chromiuml605 Stent With 80 Micron Stent Thickness With Open Cell Structure For Side Branch Re Crossing With Gradient Coating Technology And Abluminous Coating Of Drug And The Stent Comes With 8 Crowns And 2 Link Connectors In The Struts. , Us Fda / Ce / Jpan Pmda Approved-Tig3.5 And 4.0 ( Tiger Curve ) / Jr / Jl / Al / Ar / Pigtail Diagnostic Catheter, Size:5F-6F / 100 Cm, Soft Catheter With Torque Controlinternationally Accepted Terumo Quality And Equal Performance Needed For Patient Safety & To Avoid Spasm Of Radial Artery, 5F-6F / 100 Cm, , Us Fda / Ce / Jpan Pmda Approved- Des, Sirolimus 3.9Nano Gram / Stent Length, Cobalt Chromiuml605 Stent With 80 Micron Stent Thickness With Open Cell Structure For Side Branch Re Crossing With Gradient Coating Technology And Abluminous Coating Of Drug And The Stent Design Comes With 8 Crowns And 2 Link Connectors In The Struts. Comes With Improved Polymer Technology At The Tip Thereby Enhancing Better Crossing Profile And Comes With Re Enhanced Stainless Steel Core Wire Technology For Better Pushability. , Us Fda / Ce / Jpan Pmda Approved-Radial Closure Devices With Dual Compression Balloons With Curved Support Plate And Comes With Magic Tape That Is Easy To Apply And Comes With Syringe System To Permit Accurate Pressure Adjustment And Comes In Lengths 24Cm And 29Cms. , Us Fda / Ce / Jpan Pmda Approved-Ultra Low Profile Semi-Compliant Cto Balloon With 0.016 Tip Entry Profile, Flexible Tip. Tri Wrapped Balloon For Superior Re Wrapping Performance To Enhance Re Crossability And Thin Proximal Shaft Of 1.9 Fr, Nominal Of 6 Atm And Rbp Of 14Atm. 1.00 - 3.00 Mm And Length Starting From 5Mm For Theballoon ( Fda / Ce ) , Us Fda / Ce / Jpan Pmda Approved-Total Integrated Fit Tip Tapering That Comes With Cross Cut Hemostasis Valve To Avoid Blood Reflux And Air Aspiration.Thin Radiopaque Sheath With Anti-Kinking Sleeve. Need Hydrophilic M Coating Technology And Size In 4F, 5F, 6F, 7F, 8F, 9F And 10F Andwith 10Cms And 16Cms Length Access Sheath. , Us Fda / Ce / Jpan Pmda Approved-Aspiration Catheter Comes With A Balance Of Crossing Performance, Kink Resistance While Providing Atraumatic And Effective Aspiration.Needbraided Shaft With Hydrophilic M Coating Technology And Pre-Loaded Stiffening Stylet And Comes With 23Cms Rapid Exchange Segment And Hydrophilic Coating Of Distal 40Cms And Comes With Usable Length Of 140Cms And Is Available In 6F And 7F With Large Inner Lumen For Effective Aspiration. , Us Fda Approved Contra Latrel Left Guiding Catheter With Atraumatic Soft Tip, Unique Hydrophilic Segment Uncoated Distal And Proximal Segment Size 6 / 7Fr X .071-.082 X 100Cm And 3 / 3.5 / 4 Sizes , Us-Fda Approved For Cto Indication, Semi & Non Compliant Balloon Dilatation Catheter , Balloon Lengths-8-38Mm, Balloon Diameters-2-4.5Mm, 0.014” Compatible With Flexible Tungsten Markers , Us-Fda Approvedfor Cto Indication, Semi & Non Compliant Balloon Dilatation Catheter , Avrage Burst Pressur Of 18 Atmosphere And 143Cm Length With Flexible Tungsten Markers , Us-Fda Approvedfor Cto Indication, Semi & Non Compliant Balloon Dilatation Catheter , Size:1.5, 2, 2.5Mm, Length:6, 8, 12, 15 With Flexible Tungsten Markers, Otw , Fda Approved Semicompliant Balloon Dilatation Catheter With Crossflex Technology, Laser Bond Technology, Size: 1.2, 1.5, 2, 2.5Mm, Length :6, 8, 12, 15With Flexible Tungsten Markers , Fda Approvednon Compliant Balloon Dilatation Catheter With Crossflex Technology, Laser Bond Technology, Size;2, 2.5, 2.75, 3, 3.5, 4, 4.5Mm, Length;6, 8, 12, 15Mm With Flexible Tungsten Markers , Ce Approved Everolimus Eluting Coronary Stent Systemø Struts / Cells Shows A Wavy Pattern And Are Not Straight With Outerradius Of 0.1725Mm. The Cell Angle Is Between 42 Degree To 57 Degree With Respect To Different Diameter. The Cells Are Connected By “Link” ( Mid To Mid Pattern ) With A Radius Of 0.2700Mm. These Values Have Been Validated For Lower Stent Profile, Uniform Expansion, Side Branch Access, Good Trackability & Strong Radial Support.Ø Components - Drug: Everolimus, Stent Platform: Cobalt Chromium L605 Alloy, Polymer: Biodegradable, Catheter: Ptca Rapid Exchange Semi-Compliant Stent Delivery Catheter. Drug Concentration: 1.2 Microgram / Mm2 Of Stent Surface Area.Ø Stent Diameter ( Mm ) : 2.00, 2.25, 2.50, 2.75, 3.00, 3.50, 4.00 & 4.50 & Stent Length ( Mm ) : 8, 13, 16, 20, 24, 28, 32, 36, 40, 43, 47Ø Platinum-Iridium Radiopaque Markers Are Precisely Placed Within The Balloon Cones For Accurate Stent Positioning, Also The Difference Between Stent Edge To Marker Is <0.5Mm ( Atboth Sides, Proximal & Distal ) Which Prevents The Dogboning During The Angioplasty. , Ce Approved Sirolimus Eluting Coronary Stent System Ø Struts / Cells Shows A Wavy Pattern And Are Not Straight With Outerradius Of 0.1725Mm. The Cell Angle Is Between 42 Degree To 57 Degree With Respect To Different Diameter. The Cells Are Connected By “Link” ( Mid To Mid Pattern ) With A Radius Of 0.2700Mm. These Values Have Been Validated For Lower Stent Profile, Uniform Expansion, Side Branch Access, Good Trackability & Strong Radial Support.Ø Components - Drug: Everolimus, Stent Platform: Cobalt Chromium L605 Alloy, Polymer: Biodegradable, Catheter: Ptca Rapid Exchange Semi-Compliant Stent Delivery Catheter. Drug Concentration: 1.2 Microgram / Mm2 Of Stent Surface Area.Ø Stent Diameter ( Mm ) : 2.00, 2.25, 2.50, 2.75, 3.00, 3.50, 4.00 & 4.50 & Stent Length ( Mm ) : 8, 13, 16, 20, 24, 28, 32, 36, 40, 43, 47Ø Platinum-Iridium Radiopaque Markers Are Precisely Placed Within The Balloon Cones For Accurate Stent Positioning, Also The Difference Between Stent Edge To Marker Is <0.5Mm ( Atboth Sides, Proximal & Distal ) Which Prevents The Dogboning During The Angioplasty. , Only Dcgi Approved Everolimus Eluting Coronary Stent Systemø Struts / Cells Shows A Wavy Pattern And Are Not Straight With Outerradius Of 0.1725Mm. The Cell Angle Is Between 42 Degree To 57 Degree With Respect To Different Diameter. The Cells Are Connected By “Link” ( Mid To Mid Pattern ) With A Radius Of 0.2700Mm. These Values Have Been Validated For Lower Stent Profile, Uniform Expansion, Side Branch Access, Good Trackability & Strong Radial Support.Ø Components - Drug: Everolimus, Stent Platform: Cobalt Chromium L605 Alloy, Polymer: Biodegradable, Catheter: Ptca Rapid Exchange Semi-Compliant Stent Delivery Catheter. Drug Concentration: 1.2 Microgram / Mm2 Of Stent Surface Area.Ø Stent Diameter ( Mm ) : 2.00, 2.25, 2.50, 2.75, 3.00, 3.50, 4.00 & 4.50 & Stent Length ( Mm ) : 8, 13, 16, 20, 24, 28, 32, 36, 40, 43, 47Ø Platinum-Iridium Radiopaque Markers Are Precisely Placed Within The Balloon Cones For Accurate Stent Positioning, Also The Difference Between Stent Edge To Marker Is <0.5Mm ( Atboth Sides, Proximal & Distal ) Which Prevents The Dogboning During The Angioplasty. , Only Dcgi Approved Sirolimus Eluting Coronary Stent Systemø Struts / Cells Shows A Wavy Pattern And Are Not Straight With Outerradius Of 0.1725Mm. The Cell Angle Is Between 42 Degree To 57 Degree With Respect To Different Diameter. The Cells Are Connected By “Link” ( Mid To Mid Pattern ) With A Radius Of 0.2700Mm. These Values Have Been Validated For Lower Stent Profile, Uniform Expansion, Side Branch Access, Good Trackability & Strong Radial Support.Ø Components - Drug: Everolimus, Stent Platform: Cobalt Chromium L605 Alloy, Polymer: Biodegradable, Catheter: Ptca Rapid Exchange Semi-Compliant Stent Delivery Catheter. Drug Concentration: 1.2 Microgram / Mm2 Of Stent Surface Area.Ø Stent Diameter ( Mm ) : 2.00, 2.25, 2.50, 2.75, 3.00, 3.50, 4.00 & 4.50 & Stent Length ( Mm ) : 8, 13, 16, 20, 24, 28, 32, 36, 40, 43, 47Ø Platinum-Iridium Radiopaque Markers Are Precisely Placed Within The Balloon Cones For Accurate Stent Positioning, Also The Difference Between Stent Edge To Marker Is <0.5Mm ( Atboth Sides, Proximal & Distal ) Which Prevents The Dogboning During The Angioplasty. , Nickel Titanium Guide Wire With Hydrophilic Coated Wire 035 Length260 , Nickel Titanium Guide Wire With Hydrophilic Coated Wire 035 Length150 , Puncture Site Presuure Device , ( Fda Approved ) Non Compliant Hydrophilic Coated Balloon With Flexible Thin Markers, Tri Layer Balloons With Soft Inner And Outer Elastomer Layers That For Resistance From High Pressures And Stronger Polymide Layer In The Middle For Aditional And Safer High Pressur Ressistance., Shaft Diameter Of 1.9F Proximal And 2.5F In The Mid Segment 145 Cm Length With Nominal Pressure Of 12 Atm And Rbp 22 Atm , Lesion Entry Profile 0.017 Balloon Diameter Of 0.75 -2.0Mm Balloon Length - 5Mm - 30 Mm, Working Length - 140Cm , 0.014With Medium Weight Support , Hydrophilic Coating , Flat Corewire Design , High -Fidelity Sensor Technology , Radio Opaque Tip, Frequency Range -2.4000-2.4835Ghz ( Ism Band ) , Pressure Range -30To +300Mmhg Frequency Range -2.4000-2.4835Ghz ( Ism Band ) , Pressure Range -30To +300Mmhg , Eagle Eye Platinum 20Mhz Working Length - 150Cm, Maximum Field Of View - 20 Mm, Minimum Guide Catheter - 5F, Maximum Guide Wire 0.014 , 45 Mhz Rotational Ivus Catheter With Hi-Q Imaging Length 36.6 Cm , Width - 10.2 Cm, Height-9.9 Cm, Weight- 1.3 Kg, Pullback Length - 15 Cm, Pull Back Speed - 0.5&1.0 Mm / Sec , Sirolimus Eluting Pta Balloon Catheter Nominal Balloon Pressure -6 Bar Rbp - 20-40Mm : Rbp 12 Bar, 60-150Mm: Rbp 10 Bar, Balloon Diameter - 2.0Mm-7.0Mm, Balloon Lengths 20-150 , Fda Approved Inlflation Device , 30Ml , 35 Atm Pressure , Fda Approved Inlfation Device , 60Ml , 12 Atm Pressure , Fda Approved Large Bore Rotating Type Hemostasis Valve ( Y Connector ) With An Inner Lumen Of 0.120 / 9F , With Metal Insertion Tool And Torque Device , Fda Approved Double Y Connector With An Inner Lumen Of 0.120 / 9F With Polycarbonate Body , Fda Approved Push Pull Y Connector With Metal Insertion Tool And Torque Device With Polycarbonate Body , Fda Approved Push Pull Y Connector Spring Type With Polycarbonate Body , Fda Approved Control Syringes , Fda Approvedpolycarbonate Syringes With Luer And Colour Options , Availabe In 1, 2, 3, 6, 10, 20, 30 & 60Ml , Fda Approved Vacuum Pressure Syringes 10 And 20 Ml , Fda Approved Vacuum Pressure Syringes 30 Ml , Fda Approved Vacuum Pressure Syringes 60 Ml , High Pressure Tubing , Pressure Monitoring Tubing , Pressure Infusion Bags -500Ml And 1000Ml , Endovascular Snare System -Single Loop And Interlaced Multi Loops , Pva Particles - 100Mg In 15Ml Screw Top Vial , Fda Approved Diagnostic Cardiology Cathteters All Femoral Shape -80, 100 And 125Cm Length , Fda Approved Diagnostic Cardiology Cathteters Ultimate Radial Curves 100 And 110Cm Length , Fda Approved Diagnostic Cardiology Cathteters Ultimate Radial Curves 125Cm In Length , Fda Approved Radial Pigtail Cathteters , Fda Approved Aspiration Catheter Kits Designed For The Efficient Removal Of Fresh, Soft Emboli And Thrombi From Vessels Of The Arterial System. , Fda Approved Guiding Catheters -5F, 6F, 7F And 8F , Fda Approved Peripheral Intervention Diagnostic Catheters Having Length 65 , 90 And 100Cmwith Nylon Pebax Shaft With Winged Polycarbonate Hub And Can Take Both 0.035 And 0.038 Wire , Fda Approved Peripheral Intervention Diagnostic Catheters Having 125Cm Lengthwith Nylon Pebax Shaft With Winged Polycarbonate Hub And Can Take Both 0.035 And 0.038 Wire , Fda Approved Marker Pigtail Vessel Sizing Catheter, 20 Bands , 1 Cm Apart , Fda Approved Ptfe Wire J3 / Straight Guidewire .035 X 150 / .038 X 150 , Precoated With Teflon , Fda Approved Superstiff Ptfe Wire Straight , Precoated With Teflon , Fda Approved Ptfe J3 / Straight Guidewire , 0.035 X 260 / .038X260 , Fda Approvedhydrophilic Guide Wire, Standard Or Stiff- 0.035 X 150 / .025 X 150 , Fda Approved Hydrophilic Guide Wire , Standard Or Stiff - 0.035 X 260, .025 X 180 / 260, .018 X 150 / 180 / 260 , Fda Approved Ptfe Amplatz Guide Wire , Fda Approved Femoral Sheath 4F, 5F, 6F, 7F, 8F, Length 11 And 23Cm In Holster Package With Guide Wire , Dialator And Punture Needle , Fda Approved Radial Sheath Introducers 4F, 5F, 6F And 7F In Holster Package With Guide Wire , Dialator And Punture Needle , Fda Approved Hydrophilic Braided Sheath Introducer With Ultra Thin Technology , In Holster Package Along With Sheath Dialator , Guide Wire And Puncture Needle , Fda Approved Radial Band For Vascular Hemostasis , Balloon Inflated For Patient Comfort , Available In 24Cm And 29Cm , Fda Approved Distal Radial Band For Vascular Hemostasis , Micro Punture Kitsavailable In 4 French And 5 French And Include The Coaxial Introducer / Dilator Pair, 21 Gauge Needle And 0.018? ( 0.46 Mm ) Guide Wire , Puncture Site Presure Device ( Non Invasive ) , Puncture Site Presure Device ( Chitosan Haemostatic Dressing ) , 8F Femoral Sheath , Eto Gas Catridge For 3M Sterivac Gs5 Mechine , Abgel ( Absorbable Surgical Gelatin Sponge ) , Ecg Electrodesfor Resting Ecg, Stress Test, Holter Monitoring And Patient Monitoring In Ccu Which Are Designed To Ensure Positive Contact With The Skin And Enable Reliable Connections With Ecg Leadwire , Ecg Electrodes With Carbon Steel Botton
Contract Date: Mar 06, 2025 Contract Value : ₹ 1.00 Crore
Government Departments No of Bidders 22
Kerala View Result →
44.
Science and Technology #8485508 AOC
Bids Are Invited For Detector Of Continuous Air Monitor Beta As Technical Specification Annexure Attached , Radiation Survey Meter Total Quantity : 20
Contract Date: Ref. Documents Contract Value : ₹ 4.16 Lakh
Government Departments No of Bidders 6
Tamil Nadu View Result →
45.
Science and Technology #8484382 AOC
Bids Are Invited For Radiation Survey Meter (Q3) Total Quantity : 6
Contract Date: Ref. Documents Contract Value : ₹ 4.37 Lakh
Government Departments No of Bidders 4
West Bengal View Result →
46.
Science and Technology #8476906 AOC
Bids Are Invited For Supply Of Spare Pcb With Hv Modules For Radiation Measuring Units , Radiation Survey Meter Total Quantity : 2
Contract Date: Ref. Documents Contract Value : ₹ 3.20 Lakh
Government Departments No of Bidders 4
Telangana View Result →
47.
Power #8457919 AOC
Bids Are Invited For Electronic Unit For Counting System Type Cs 201 (Pla Electro Appliances Pvt. Ltd. Make) , Radiation Survey Meter Total Quantity : 4
Contract Date: Ref. Documents Contract Value : ₹ 2.83 Lakh
Boards / Undertakings / PSU No of Bidders 1
Rajasthan View Result →
Maharashtra View Result →
49.
Science and Technology #8386172 AOC
Bids Are Invited For Portable Neutron Survey Meter , Radiation Survey Meter Total Quantity : 2
Contract Date: Ref. Documents Contract Value : ₹ 22.42 Lakh
Government Departments No of Bidders 5
West Bengal View Result →
50.
Educational and Research Institute #8385282 AOC
Bids Are Invited For Radiation Survey Meter (Q3) Total Quantity : 1
Contract Date: Ref. Documents Contract Value : ₹ 9.26 Lakh
Local Bodies No of Bidders 2
Andhra Pradesh View Result →
TenderDetail
Loading tenders